National Library of Energy BETA

Sample records for technological choice criteria

  1. Machine plumbness criteria: Interim technology release

    SciTech Connect (OSTI)

    Not Available

    1987-06-01

    The objective of this technology release is to define the maximum allowable deviation from plumb of the centrifuge machine and to recommend machine installation techniques to achieve the specified criteria. The centrifuge feature used as a reference for plumbness is the casing centerline as defined by a line drawn between the theoretical centers of the top and bottom flange faces. In practice, this measurement is accomplished by using specified casing flange diameters or bolt patterns as the reference points. The criterion adopted for GCEP is that each machine shall be plumb within 0.5 in. over the length of the casing as initially installed. Over a long period of time the plumbness is allowed to degrade to 1.0 in. This standard should be achievable using the currently planned installation techniques and within a time limit consistent with GCEP operational objectives. For development testing, centrifuge machines are meticulously adjusted using a plumb bob to achieve a plumbness with 1/8 in. About one to two days are required to complete the installation. This level of effort is justified for a development machine especially where baseline data is being gathered. A more reasonable standard with a corresponding reduction in installation time is required for GCEP. The specified criteria of 0.5 in. maximum out-of-plumb at time of installation and 1.0 in., ultimate, are believed to be a reasonable compromise. Machine design features or operating modes that are dependent on vertical alignment were examined to assess the impact of the selected plumbness criteria. Machine performance and design requirements are defined in the applicable technology release documents.

  2. Vehicle Technologies Office Merit Review 2015: ParaChoice: Parametric Vehicle Choice Modeling

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation given by Sandia National Laboratory at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about ParaChoice:...

  3. Fairness hypothesis and managing the risks of societal technology choices

    SciTech Connect (OSTI)

    Cantor, R.; Rayner, S.

    1986-08-01

    Much of the literature on risk perception and management has asked how society should resolve the question, ''How safe is safe enough'' There has been political and technical disagreement over the types of answers that may be given, as well as over the social values attached to perceived probabilities and magnitudes of various outcomes. Despite controversy, there seems to have been a large measure of consensus that, ''How safe is safe enough'' is the right question to ask. This paper sets out to question that assumption. Various ingenious techniques of risk analysis have sought to discover the real risks inherent in various activities, but from a sociocultural viewpoint it can be seen that no single answer can be given to the problem of adequate safety in a complex society which contains a wide variety of perceptual biases about danger, expectations of the good life, and levels of demand for safety. The paper argues that, from a societal risk-management perspective, we should be addressing a different range of questions that views societal risk as a whole rather than as the sum of individual hazards. Resolving the question, ''How safe is safe enough'' is less important in making societal technology choices than ''How fair is safe enough.'' A recent empirical pilot study is reported which explored the fairness hypotheses in the context of nuclear power. The results indicate that the process of technology choice should recognize explicitly the preferred principles different parties hold with respect to obtaining consent from those affected by the risks, distributing the liabilities, and justifying trust in the relevant institutions. The paper closes with a discussion of future prospects for the fairness approach in areas such as noxious facility siting.

  4. Postfeminist Technologies: Digital Media and the Culture Industries of Choice

    E-Print Network [OSTI]

    Cohn, Jonathan

    2013-01-01

    to Jonathan Cohn. “Plastic Surgery Technology Questions,”to Jonathan Cohn, “Plastic Surgery Technology Questions,”markets its 3D imaging technology to plastic surgeons via

  5. Vehicle Technologies Office Merit Review 2014: ParaChoice: Parametric Vehicle Choice Modeling

    Broader source: Energy.gov [DOE]

    Presentation given by Sandia National Laboratories at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about parametric...

  6. Postfeminist Technologies: Digital Media and the Culture Industries of Choice

    E-Print Network [OSTI]

    Cohn, Jonathan

    2013-01-01

    Digital Subjectivity Technology is essential to the transformationsdigital image technologies to present the body as a site of potential transformation –digital plenitude of seemingly endless information is just as much a force in this transformation.

  7. Human choice and climate change. Volume 2: Resources and technology

    SciTech Connect (OSTI)

    Rayner, S.; Malone, E.L.

    1997-12-31

    Foreward: Preface; Introduction; The natural science of global climate change; Land and water use; Coastal zones and oceans; Energy and industry; Energy and social systems; Technological change; and Sponsoring organizations, International Advisory Board, and project participants.

  8. A proposed framework for establishing integrated cost and performance criteria for environmental technologies: A summary report

    SciTech Connect (OSTI)

    NONE

    1994-05-01

    This document presents a summary of results of a joint EPA/DOE project aimed at establishing a suite of standard cost and performance criteria for evaluating environmental cleanup technologies for DOE sites. Project findings include: (1) decisionmakers have quite different perspectives with interests and information needs varying among decisionmaker groups, (2) previous criteria development efforts may be too narrowly focused to apply to all decisionmakers, (3) criteria must include social/political/economic interests of decisionmakers as well as site-specific variations, and (4) there are 5 core questions that all decisionmakers are likely to ask when considering a technology for use at a site. The resource developed in the project offers decisionmakers a first-time comprehensive assessment of major technology evaluation issues.

  9. The fairness hypothesis and managing the risks of societal technology choices

    SciTech Connect (OSTI)

    Cantor, R.; Rayner, S.

    1987-01-01

    Much of the literature on risk perception and management published over the last few years has asked how society should resolve the question, ''How safe is safe enough.'' This paper argues that, from a societal risk-management perspective, we should be addressing a different range of questions that views societal risk as a whole rather than as the sum of individual hazards. Resolving the question, ''How safe is safe enough.'' is less important in making societal technology choices than ''How fair is safe enough.'' A recent empirical pilot study is reported which explored the fairness hypothesis in the context of nuclear power. The results indicate that the process of technology choice should recognize explicitly the preferred principles different parties hold with respect to obtaining consent from those affected by the risks, distributing the liabilities, and justifying trust in the relevant institutions. The paper closes with a discussion of future prospects for the fairness approach to areas such as noxious facility siting.

  10. Role of liability preferences in societal technology choices: results of a pilot study

    SciTech Connect (OSTI)

    Cantor, R.; Rayner, S.; Braid, B.

    1985-01-01

    At the 1984 Annual Meeting of the Society for Risk Analysis, Steve Rayner presented a paper that challenged the conventional wisdom of risk management research. In that paper, he argued that resolving the question, ''How safe is safe enough.'' is less important in making societal technology choices than ''How fair is safe enough.'' Adopting the fairness question as the concern of risk management would imply that the process of technology choice explicitly recognize the preferred principles different parties hold with respect to obtaining consent from those affected by the risks, distributing the liabilities, and justifying trust in the relevant institutions. This paper discusses a recent empirical pilot study which explored the fairness hypothesis in the context of nuclear power. Individual interviews and focus groups were conducted to examine whether or not preferred principles for liability distributions were consistent with those suggested by the cultural characteristics of the constituency. The results suggest that for this type of societal technology choice, violation of these preferred principles may be a major source of the conflict between different constituencies. Additionally, the study contributes towards the development of a new approach in risk management that combines the cultural model of risk perceptions with the decision-theoretic approaches found in economics and psychology.

  11. Cost savings deliverables and criteria for the OST technology decision process

    SciTech Connect (OSTI)

    McCown, A.

    1997-04-01

    This document has been prepared to assist focus area (FA) technical and management teams in understanding the cost savings deliverables associated with a technology system during its research and development (R and D) phases. It discusses the usefulness of cost analysis in the decision-making process, and asserts that the level of confidence and data quality of a cost analysis is proportional to the maturity of the technology system`s development life cycle. Suggestions of specific investment criteria or cost savings metrics that a FA might levy on individual research projects are made but the final form of these elements should be stipulated by the FA management based on their rationale for a successful technology development project. Also, cost savings deliverables for a single FA will be more detailed than those for management of the Office of Science and Technology (OST). For example, OST management may want an analysis of the overall return on investment for each FA, while the FA program manager may want this analysis and the return on investment metrics for each technology research activity the FA supports.

  12. Market Share Elasticities for Fuel and Technology Choice in Home Heating and Cooling

    E-Print Network [OSTI]

    Wood, D.J.

    2010-01-01

    of space heating to air conditioning choice; 3) explicitthe presence of central air conditioning, it seems unwise tonot to have central air conditioning. Statistical evidence

  13. DEVELOPMENT OF RISK-BASED AND TECHNOLOGY-INDEPENDENT SAFETY CRITERIA FOR GENERATION IV SYSTEMS

    SciTech Connect (OSTI)

    William E. Kastenberg; Edward Blandford; Lance Kim

    2009-03-31

    This project has developed quantitative safety goals for Generation IV (Gen IV) nuclear energy systems. These safety goals are risk based and technology independent. The foundations for a new approach to risk analysis has been developed, along with a new operational definition of risk. This project has furthered the current state-of-the-art by developing quantitative safety goals for both Gen IV reactors and for the overall Gen IV nuclear fuel cycle. The risk analysis approach developed will quantify performance measures, characterize uncertainty, and address a more comprehensive view of safety as it relates to the overall system. Appropriate safety criteria are necessary to manage risk in a prudent and cost-effective manner. This study is also important for government agencies responsible for managing, reviewing, and for approving advanced reactor systems because they are charged with assuring the health and safety of the public.

  14. Technology choice and its performance: Towards a sociology of software package procurement 

    E-Print Network [OSTI]

    Williams, R.; Pollock, N

    2007-06-27

    Technology Acquisition is an important but neglected issue within the social science analysis of technology. The limited number of studies undertaken reproduce a schism between rationalist (e.g., economic) forms of ...

  15. Learning-by-Doing and the Choice of Technology: The Role of Patience

    E-Print Network [OSTI]

    Karp, Larry S.

    . An agent who is less 1 #12;familiar with the existing technology has a lower opportunity cost of adopting technology and under the next best alternative, i.e. on the opportunity cost of adoption. The opportunity cost of adoption may be higher for the more advanced ¿rms, because of their pro¿ciency in using the old

  16. The use of information technology security assessment criteria to protect specialized computer systems

    SciTech Connect (OSTI)

    Lykov, V.A.; Shein, A.V.; Piskarev, A.S.; Devaney, D.M.; Melton, R.B.; Hunteman, W.J.; Prommel, J.M.; Rothfuss, J.S.

    1997-10-01

    The purpose of this paper is to discuss the information security assessment criteria used in Russia and compare it with that used in the United States. The computer system security assessment criteria utilized by the State Technical Commission of Russia and similar criteria utilized by the US Department of Defense (TCSEC) are intended for the development and implementation of proven methods for achieving a required level of information security. These criteria are utilized, first and foremost, when conducting certification assessments of general purpose systems. The Russian Federation is creating specialized systems for nuclear material control and accountancy (MC and A) within the framework of the international laboratory-to-laboratory collaboration. Depending on the conditions in which the MC and A system is intended to operate, some of the criteria and the attendant certification requirements may exceed those established or may overlap the requirements established for attestation of such systems. In this regard it is possible to modify the certification and attestation requirements depending on the conditions in which a system will operate in order to achieve the ultimate goal--implementation of the systems in the industry.

  17. History of Science, Technology, and Medicine Choose what you want to search from these choices.

    E-Print Network [OSTI]

    ). The default finds all the words entered and does not allow Boolean searching. 3. Use quotation marks are entered. A search for Euclidean geometry will have more results than and include the results of a searchHistory of Science, Technology, and Medicine Results Choose what you want to search from

  18. The Impact of Near-term Climate Policy Choices on Technology and Emissions Transition Pathways

    SciTech Connect (OSTI)

    Eom, Jiyong; Edmonds, James A.; Krey, Volker; Johnson, Nils; Longden, Thomas; Luderer, Gunnar; Riahi, Keywan; Van Vuuren, Detlef

    2015-01-01

    This paper explores the implications of delays associated with currently formulated climate policies (compared to optimal policies) for long-term transition pathways to limit climate forcing to 450ppm CO2e on the basis of the AMPERE Work Package 2 model comparison study. The paper highlights the critical importance of the 2030-2050 period for ambitious mitigation strategies. In this period, the most rapid shift to non-greenhouse gas emitting technology occurs. In the delayed response emissions mitigation scenarios, an even faster transition rate in this period is required to compensate for the additional emissions before 2030. Our physical deployment measures indicate that, without CCS, technology deployment rates in the 2030-2050 period would become considerably high. Yet the presence of CCS greatly alleviates the challenges to the transition particularly after the delayed climate policies. The results also highlight the critical role that bioenergy and CO2 capture and storage (BECCS) could play. If this technology is available, transition pathways exceed the emissions budget in the mid-term, removing the excess with BECCS in the long term. Excluding either BE or CCS from the technology portfolio implies that emission reductions need to take place much earlier.

  19. The impact of instrument choice on investment in abatement technologies: a case study of tax versus trade incentives for CCS and Biomass for electricity

    E-Print Network [OSTI]

    Laing, T.; Grubb, Michael

    opportunities for wider deployment of the technology, and may be externally funded, at least partially, through government support. CCS is an immature technology, in comparison with biomass for power, with greater uncertainty over costs and performance... K IN G P A P E R Abstract The impact of instrument choice on investment in abatement technologies: a case study of tax versus trade incentives for CCS and Biomass for electricity EPRG Working Paper 1004 Cambridge Working Paper...

  20. How fair is safe enough. The cultural approach to societal technology choice

    SciTech Connect (OSTI)

    Rayner, S.; Cantor, R.

    1987-03-01

    This paper consists of an argument and a pilot study. First is a general, perhaps philosophical, argument against the National Academy's viewpoint that dealing with risk is a two-stage process consisting of (a) assessment of facts, and (b) evaluation of facts in sociopolitical context. They argue that societal risk intrinsically revolves around social relations as much as around evaluations of probability. Second, they outline one particular approach to analyzing societal risk management styles. They call this the fairness hypothesis. Rather than focusing on probabilities and magnitudes of undesired events, this approach emphasizes societal preferences for principles of achieving consent to a technology, distributing liabilities, and investing trust in institutions. Conflict rather than probability is the chief focus of this approach to societal risk management. This view is illustrated by a recent empirical pilot study that explored the fairness hypothesis in the context of new nuclear technologies.

  1. Forecasting the Market Penetration of Energy Conservation Technologies: The Decision Criteria for Choosing a Forecasting Model 

    E-Print Network [OSTI]

    Lang, K.

    1982-01-01

    technologies. This paper briefly discusses the observed patterns of the diffusion of new' technologies and the determinants (both sociological and economic) which have been proposed to explain the variation in the diffusion rates. Existing market penetration...

  2. A proposed framework for establishing integrated cost and performance criteria for environmental technologies. A summary report to the U.S. Department of Energy

    SciTech Connect (OSTI)

    Not Available

    1994-05-01

    Through an Interagency Agreement between the US Environmental Protection Agency (EPA) and the US Department of Energy (DOE), EPA directed a project to establish a suite of standard cost and performance criteria to guide the evaluation of environmental cleanup technologies for DOE sites. Ideally, these criteria would be ``generic`` in that they could be used as a basis for evaluating any cleanup technology for any DOE site. To be most useful, however, these criteria would also reflect the interests of diverse decisionmakers who influence DOE technology evaluation. The project was conducted by the National Environmental Technology Applications Center (NETAC), a nonprofit organization specializing in the development and commercialization of new and innovative environmental technologies for national and international markets. To accomplish the project objective, NETAC (1) developed a data gathering questionnaire, (2) interviewed government and industry decisionmakers, (3) identified previous criteria development efforts, (4) conducted a workshop, (5) evaluated workshop discussions, and (6) applied its five years` experience in commercializing environmental technologies to analyze project findings. The project resulted in the development of a unique and comprehensive resource or tool to enhance communication among decisionmakers. This resource, a ``Proposed Framework for Establishing Integrated Cost and Performance Criteria for Evaluating Environmental Cleanup Technologies for DOE Sites,`` offers decisionmakers a first-time comprehensive assessment of major technology evaluation issues by a decisionmaker group.

  3. Vehicle Technologies Office Merit Review 2014: Consumer-Segmented Vehicle Choice Modeling: the MA3T Model

    Broader source: Energy.gov [DOE]

    Presentation given by Oak Ridge National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about consumer...

  4. Vehicle Technologies Office Merit Review 2014: Alternative Fuel Market Development Program- Forwarding Wisconsin’s Fuel Choice

    Broader source: Energy.gov [DOE]

    Presentation given by Wisconsin Department of Administration at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about...

  5. The impact of computer technology on language choice and CMC practice: A study of Instant Messaging in Hong Kong 

    E-Print Network [OSTI]

    LIN, Pik-Yan

    2008-01-01

    Research on computer-mediated communication (CMC) has moved from the linguistic aspect to the sociolinguistic dimension in order to understand how human linguistic behaviour is influenced by the availability of new technology. ...

  6. Sparse choice models

    E-Print Network [OSTI]

    Farias, Vivek F.

    Choice models, which capture popular preferences over objects of interest, play a key role in making decisions whose eventual outcome is impacted by human choice behavior. In most scenarios, the choice model, which can ...

  7. Design Quality Criteria Design Quality Criteria

    E-Print Network [OSTI]

    van Sinderen, Marten

    Design Quality Criteria 19 Chapter 2 Design Quality Criteria This chapter discusses what qualities are desirable of an application protocol design, and what quality criteria can be used when evaluating methodology. The quality criteria presented are not peculiar to application protocol design

  8. Technology reviews: Glazing systems

    SciTech Connect (OSTI)

    Schuman, J.; Rubinstein, F.; Papamichael, K.; Beltran, L.; Lee, E.S.; Selkowitz, S.

    1992-09-01

    We present a representative review of existing, emerging, and future technology options in each of five hardware and systems areas in envelope and lighting technologies: lighting systems, glazing systems, shading systems, daylighting optical systems, and dynamic curtain wall systems. The term technology is used here to describe any design choice for energy efficiency, ranging from individual components to more complex systems to general design strategies. The purpose of this task is to characterize the state of the art in envelope and lighting technologies in order to identify those with promise for advanced integrated systems, with an emphasis on California commercial buildings. For each technology category, the following activities have been attempted to the extent possible: Identify key performance characteristics and criteria for each technology; determine the performance range of available technologies; identify the most promising technologies and promising trends in technology advances; examine market forces and market trends; and develop a continuously growing in-house database to be used throughout the project. A variety of information sources have been used in these technology characterizations, including miscellaneous periodicals, manufacturer catalogs and cut sheets, other research documents, and data from previous computer simulations. We include these different sources in order to best show the type and variety of data available, however publication here does not imply our guarantee of these data. Within each category, several broad classes are identified, and within each class we examine the generic individual technologies that fag into that class.

  9. Quality Competition, Insurance, and Consumer Choice

    E-Print Network [OSTI]

    Lyon, Thomas P.

    to lock in market share via managed-care plans with less choice and lower prices. As technology becomes managed care. 1. Introduction Health economists largely agree that the key driver of health care costs care payment plans. The interplay of technology, insur- ance, quality of care, and cost containment has

  10. Future Choices 1 Running head: EFFECT OF FUTURE CHOICES

    E-Print Network [OSTI]

    Future Choices 1 Running head: EFFECT OF FUTURE CHOICES The Effect of Highlighting Future Choices on Current Preferences Uzma Khan Carnegie Mellon University Ravi Dhar Yale School of Management #12;Future future choices rather than as an isolated choice. Our finding contrasts with the general wisdom

  11. NEIGHBORHOOD CHOICE AND NEIGHBORHOOD CHANGE

    E-Print Network [OSTI]

    Bruch, Elizabeth; Mare, Robert D.

    2006-01-01

    Neighborhood Proportion Own-Group” Continuous Function Non-of Choice Proportion White Nonlinear Continuous Model 1976of Choice Proportion Black Nonlinear Continuous Model 1976

  12. Reactor options for disposition of excess weapon plutonium: Selection criteria and decision process for assessment

    SciTech Connect (OSTI)

    Edmunds, T.; Buonpane, L.; Sicherman, A.; Sutcliffe, W.; Walter, C.; Holman, G.

    1994-01-01

    DOE is currently considering a wide range of alternatives for disposition of excess weapon plutonium, including using plutonium in mixed oxide fuel for light water reactors (LWRs). Lawrence Livermore National Laboratory (LLNL) has been tasked to assist DOE in its efforts to develop a decision process and criteria for evaluating the technologies and reactor designs that have been proposed for the fission disposition alternative. This report outlines an approach for establishing such a decision process and selection criteria. The approach includes the capability to address multiple, sometimes conflicting, objectives, and to incorporate the impact of uncertainty. The approach has a firm theoretical foundation and similar approaches have been used successfully by private industry, DOE, and other government agencies to support and document complex, high impact technology choice decisions. Because of their similarity and relatively simple technology, this report focuses on three light water reactors studied in Phase 1 of the DOE Plutonium Disposition Study. The decision process can be extended to allow evaluation of other reactor technologies and disposition options such as direct disposal and retrievable storage.

  13. Fire protection design criteria

    SciTech Connect (OSTI)

    1997-03-01

    This Standard provides supplemental fire protection guidance applicable to the design and construction of DOE facilities and site features (such as water distribution systems) that are also provided for fire protection. It is intended to be used in conjunction with the applicable building code, national Fire Protection Association Codes and Standards, and any other applicable DOE construction criteria. This Standard, along with other delineated criteria, constitutes the basic criteria for satisfying DOE fire and life safety objectives for the design and construction or renovation of DOE facilities.

  14. Technolog

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    focuses on multi-scale, multiphysics approaches to understanding natural systems, "engineering the earth" with sensing and drilling technologies and characterizing geomaterials...

  15. Water Quality Criteria Introduction ....................................................................................................................................798

    E-Print Network [OSTI]

    Pitt, Robert E.

    APPENDIX G Water Quality Criteria CONTENTS Introduction ....................................................................................................................................798 EPA's Water Quality Criteria and Standards Plan -- Priorities for the Future............................798 Compilation of Recommended Water Quality Criteria and EPA's Process for Deriving New

  16. Education Criteria for Performance

    E-Print Network [OSTI]

    Magee, Joseph W.

    and business assistance to smaller manufacturers; and the Technology Innovation Program, which provides cost to the foundation. National Institute of Standards and Technology The National Institute of Standards and Technology, standards, and technology in ways that enhance economic security and improve our quality of life. NIST

  17. Aseismic design criteria for uranium enrichment plants

    SciTech Connect (OSTI)

    Beavers, J.E.

    1980-01-01

    In this paper technological, economical, and safety issues of aseismic design of uranium enrichment plants are presented. The role of management in the decision making process surrounding these issues is also discussed. The resolution of the issues and the decisions made by management are controlling factors in developing aseismic design criteria for any facility. Based on past experience in developing aseismic design criteria for the GCEP various recommendations are made for future enrichment facilities, and since uranium enrichment plants are members of the nuclear fuel cycle the discussion and recommendations presented herein are applicable to other nonreactor nuclear facilities.

  18. Editor's Choice Editor's Choice: Crop Genome Plasticity and Its Relevance

    E-Print Network [OSTI]

    Parrott, Wayne

    . The term GE is preferred over the term "genetically modified" (commonly referred to as GMEditor's Choice Editor's Choice: Crop Genome Plasticity and Its Relevance to Food and Feed Safety of Genetically Engineered Breeding Stacks1 Genetically engineered (GE) stacks, combinations of two or more single

  19. Technologies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired Solar Fuel ProductionRecoverable15/2008Technologies Technologies

  20. Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired Solar FuelTechnology /newsroom/_assets/images/s-icon.png Technology

  1. Essays on the Evolution of Health Care Technology

    E-Print Network [OSTI]

    Hodgson, Ashley Renee

    2011-01-01

    more tools for evaluating technology cost—effectiveness ifDiscourage Investment in Therapeutic Technology? 5 2.12008, “Input and Technology Choices in Regulated Indus-

  2. Technologies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With U.S. CoalMexico IndependentMatter and Technologies R&D

  3. Autotuning programs with algorithmic choice

    E-Print Network [OSTI]

    Ansel, Jason (Jason Andrew)

    2014-01-01

    The process of optimizing programs and libraries, both for performance and quality of service, can be viewed as a search problem over the space of implementation choices. This search is traditionally manually conducted by ...

  4. Stream Cipher Criteria Erik Zenner

    E-Print Network [OSTI]

    Zenner, Erik

    given us a number of insights into design criteria for stream ciphers. Some of them were disputedStream Cipher Criteria Erik Zenner CRYPTICO A/S info@cryptico.com Abstract. The eStream project has, on others everyone seemed to agree. This text tries to collect these criteria into one comprehensive

  5. Nonparametric choice modeling : applications to operations management

    E-Print Network [OSTI]

    Jagabathula, Srikanth

    2011-01-01

    With the recent explosion of choices available to us in every walk of our life, capturing the choice behavior exhibited by individuals has become increasingly important to many businesses. At the core, capturing choice ...

  6. Health Care Criteria for

    E-Print Network [OSTI]

    Magee, Joseph W.

    promotes U.S. innovation and industrial competitiveness by advancing measurement science, standards. National Institute of Standards and Technology The National Institute of Standards and Technology (NIST infrastructure and is needed by U.S. industry to continually improve products and services; the Hollings

  7. Acceptance Criteria - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room News Publications Traditional Knowledge KiosksAbout UsAbout NewAccelerator SystemsCriteria

  8. Canada: Automobile Innovation Fund - Program Detail & Criteria...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Canada: Automobile Innovation Fund - Program Detail & Criteria Canada: Automobile Innovation Fund - Program Detail & Criteria Information from the Canadian Embassy Canada:...

  9. Career Choices: Industry vs. Academia

    E-Print Network [OSTI]

    Rohs, Remo

    Career Choices: Industry vs. Academia Yan Liu Assistant Professor Computer Science Department, IBM TJ Watson Research Center · Now, USC #12;1) What career path did you consider most during your Ph industry, and where can one make the most impact? · Best virtues in all jobs ­ Hardworking ­ Good attitude

  10. Life Choices Student Survey Items

    E-Print Network [OSTI]

    Baltisberger, Jay H.

    by Topical Area: Life Choices Berea-Specific Entering Survey, Fall Term First-Year Students and New Transfers for life-long learning Cooperative Institutional Research Program (CIRP), Entering Fall Term Students 2012, Historical Trends) Please indicate the extent to which each of the following describe you Searching

  11. FHR Generic Design Criteria

    SciTech Connect (OSTI)

    Flanagan, G.F.; Holcomb, D.E.; Cetiner, S.M.

    2012-06-15

    The purpose of this document is to provide an initial, focused reference to the safety characteristics of and a licensing approach for Fluoride-Salt-Cooled High-Temperature Reactors (FHRs). The document does not contain details of particular reactor designs nor does it attempt to identify or classify either design basis or beyond design basis accidents. Further, this document is an initial attempt by a small set of subject matter experts to document the safety and licensing characteristics of FHRs for a larger audience. The document is intended to help in setting the safety and licensing research, development, and demonstration path forward. Input from a wider audience, further technical developments, and additional study will be required to develop a consensus position on the safety and licensing characteristics of FHRs. This document begins with a brief overview of the attributes of FHRs and then a general description of their anticipated safety performance. Following this, an overview of the US nuclear power plant approval process is provided that includes both test and power reactors, as well as the role of safety standards in the approval process. The document next describes a General Design Criteria (GDC)–based approach to licensing an FHR and provides an initial draft set of FHR GDCs. The document concludes with a description of a path forward toward developing an FHR safety standard that can support both a test and power reactor licensing process.

  12. Design Criteria Document Hybrid Spectrometer

    E-Print Network [OSTI]

    Johnson, Peter D.

    Design Criteria Document for the Hybrid Spectrometer (HYSPEC) SNS SING14B-00-DC0001-R00 Date: 15 contract DE-AC05-00OR22725 #12;DESIGN CRITERIA DOCUMENT FOR THE HYBRID SPECTROMETER (HYSPEC) August 2005 or reflect those of the United States government or any agency thereof. #12;SING14B-00-DC0001-R00 DESIGN

  13. Design Criteria Document Hybrid Spectrometer

    E-Print Network [OSTI]

    Johnson, Peter D.

    Design Criteria Document for the Hybrid Spectrometer (HYSPEC) SNS SING14B-00-DC0001-R01 Date: 1 contract DE-AC05-00OR22725 #12;DESIGN CRITERIA DOCUMENT FOR THE HYBRID SPECTROMETER (HYSPEC) Mark Hagen or reflect those of the United States government or any agency thereof. #12;SING14B-00-DC0001-R01 DESIGN

  14. Eye movements in risky choice

    E-Print Network [OSTI]

    Stewart, Neil; Hermens, Frouke; Matthews, William J.

    2015-01-26

    & Findlay, 2000; Rayner, 1998, 2009; Yarbus, 1967). Glaholt and Reingold (2011), Orquin and Mueller Loose (2013), and Russo (2011) all provide comprehensive reviews of eye tracking in the decision making literature, so we will just outline some key relevant... issues. EYE TRACKING AND DECISION MAKING The final fixation made at the point of choice is strongly bi- assed towards the chosen option (Fiedler & Glöckner, 2012; Glaholt & Reingold, 2009b; Krajbich et al., 2010; Schotter, Berry, McKenzie, & Rayner, 2010...

  15. Criteria-Directed Task Scheduling Thomas Wagner

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    to task scheduling called Design-to-Criteria that controls the combinatorics via a satis cing methodology and custom designs schedules to meet a particular client's goal criteria. In Design-to- Criteria, criteria the scheduling problem tractable. We describe the interesting facets of the Design-to-Criteria approach and give

  16. ORIGINAL CONTRIBUTION Implementing Diagnostic Criteria and Estimating

    E-Print Network [OSTI]

    ORIGINAL CONTRIBUTION Implementing Diagnostic Criteria and Estimating Frequency of Mild Cognitive criteria. Objectives: To operationalize diagnostic criteria for MCI and examine the frequency of MCI in ethnically and lin- guistically diverse elders (individuals older than 65 years). Design: Prospective

  17. (NATIONAL SPHERICAL TORUS EXPERIMENT) STRUCTURAL DESIGN CRITERIA

    E-Print Network [OSTI]

    Princeton Plasma Physics Laboratory

    NSTX (NATIONAL SPHERICAL TORUS EXPERIMENT) STRUCTURAL DESIGN CRITERIA NSTX-CRIT-0001-01 February Design Criteria Revision 1 RECORD OF REVISIONS REVISION DATE ECP DESCRIPTION OF CHANGE 0 AUGUST 2003. STRUCTURAL CRITERIA

  18. Information for Media on Lighting Choices | Department of Energy

    Energy Savers [EERE]

    Information for Media on Lighting Choices Information for Media on Lighting Choices July 27, 2014 - 8:25am Addthis Information for Media on Lighting Choices These videos,...

  19. NITRATE DESTRUCTION LITERATURE SURVEY AND EVALUATION CRITERIA

    SciTech Connect (OSTI)

    Steimke, J.

    2011-02-01

    This report satisfies the initial phase of Task WP-2.3.4 Alternative Sodium Recovery Technology, Subtask 1; Develop Near-Tank Nitrate/Nitrite Destruction Technology. Some of the more common anions in carbon steel waste tanks at SRS and Hanford Site are nitrate which is corrosive, and nitrite and hydroxide which are corrosion inhibitors. At present it is necessary to periodically add large quantities of 50 wt% caustic to waste tanks. There are three primary reasons for this addition. First, when the contents of salt tanks are dissolved, sodium hydroxide preferentially dissolves and is removed. During the dissolution process the concentration of free hydroxide in the tank liquid can decrease from 9 M to less than 0.2 M. As a result, roughly half way through the dissolution process large quantities of sodium hydroxide must be added to the tank to comply with requirements for corrosion control. Second, hydroxide is continuously consumed by reaction with carbon dioxide which occurs naturally in purge air used to prevent buildup of hydrogen gas inside the tanks. The hydrogen is generated by radiolysis of water. Third, increasing the concentration of hydroxide increases solubility of some aluminum compounds, which is desirable in processing waste. A process that converts nitrate and nitrite to hydroxide would reduce certain costs. (1) Less caustic would be purchased. (2) Some of the aluminum solid compounds in the waste tanks would become more soluble so less mass of solids would be sent to High Level Vitrification and therefore it would be not be necessary to make as much expensive high level vitrified product. (3) Less mass of sodium would be fed to Saltstone at SRS or Low Level Vitrification at Hanford Site so it would not be necessary to make as much low level product. (4) At SRS less nitrite and nitrate would be sent to Defense Waste Processing Facility (DWPF) so less formic acid would be consumed there and less hydrogen gas would be generated. This task involves literature survey of technologies to perform the nitrate to hydroxide conversion, selection of the most promising technologies, preparation of a flowsheet and design of a system. The most promising technologies are electrochemical reduction of nitrates and chemical reduction with hydrogen or ammonia. The primary reviewed technologies are listed and they aredescribed in more detail later in the report: (1) Electrochemical destruction; (2) Chemical reduction with agents such as ammonia, hydrazine or hydrogen; (3) Hydrothermal reduction process; and (4) Calcination. Only three of the technologies on the list have been demonstrated to generate usable amounts of caustic; electrochemical reduction and chemical reduction with ammonia, hydrazine or hydrogen and hydrothermal reduction. Chemical reduction with an organic reactant such as formic acid generates carbon dioxide which reacts with caustic and is thus counterproductive. Treatment of nitrate with aluminum or other active metals generates a solid product. High temperature calcination has the potential to generate sodium oxide which may be hydrated to sodium hydroxide, but this is unproven. The following criteria were developed to evaluate the most suitable option. The numbers in brackets after the criteria are relative weighting factors to account for importance: (1) Personnel exposure to radiation for installation, routine operation and maintenance; (2) Non-radioactive safety issues; (3) Whether the technology generates caustic and how many moles of caustic are generated per mole of nitrate plus nitrite decomposed; (4) Whether the technology can handle nitrate and nitrite at the concentrations encountered in waste; (5) Maturity of technology; (6) Estimated annual cost of operation (labor, depreciation, materials, utilities); (7) Capital cost; (8) Selectivity to nitrogen as decomposition product (other products are flammable and/or toxic); (9) Impact of introduced species; (10) Selectivity for destruction of nitrate vs. nitrite; and (11) Cost of deactivation and demolition. Each technology was given a score from one

  20. Structural Design Criteria Irving J. Zatz, PPPL

    E-Print Network [OSTI]

    1 FIRE Structural Design Criteria Irving J. Zatz, PPPL Engineering Peer Review June 5-7, 2001 #12;2 Purpose of FIRE Design Criteria · Criteria to be utilized when conventional industrial design codes and standards do not apply ­ Operating conditions ­ Materials #12;3 The FIRE Design Criteria has evolved from

  1. Evaluation Criteria APEX Interim Report November, 1999

    E-Print Network [OSTI]

    California at Los Angeles, University of

    ;Evaluation Criteria APEX Interim Report November, 1999 4-3 Innovative Idea(s) Proposed Design Idea Analysis Small Scale Experiments Preliminary Design Information Criteria (Set 2) Most Promising ConceptEvaluation Criteria APEX Interim Report November, 1999 4-1 CHAPTER 4: EVALUATION CRITERIA

  2. Editor's Choice Editor's Choice: Evaluating the Potential for Adverse

    E-Print Network [OSTI]

    Parrott, Wayne

    breeders. The safe application of genetic engineering to food and feed crops is widely acknowledged- technology are identified by a number of terms, includ- ing genetically modified (GM), GE, transgenic Genetically Engineered Breeding Stacks1 Plant breeding has a long history of developing varieties

  3. Consumer Vehicle Choice Model Documentation

    SciTech Connect (OSTI)

    Liu, Changzheng; Greene, David L

    2012-08-01

    In response to the Fuel Economy and Greenhouse Gas (GHG) emissions standards, automobile manufacturers will need to adopt new technologies to improve the fuel economy of their vehicles and to reduce the overall GHG emissions of their fleets. The U.S. Environmental Protection Agency (EPA) has developed the Optimization Model for reducing GHGs from Automobiles (OMEGA) to estimate the costs and benefits of meeting GHG emission standards through different technology packages. However, the model does not simulate the impact that increased technology costs will have on vehicle sales or on consumer surplus. As the model documentation states, “While OMEGA incorporates functions which generally minimize the cost of meeting a specified carbon dioxide (CO2) target, it is not an economic simulation model which adjusts vehicle sales in response to the cost of the technology added to each vehicle.” Changes in the mix of vehicles sold, caused by the costs and benefits of added fuel economy technologies, could make it easier or more difficult for manufacturers to meet fuel economy and emissions standards, and impacts on consumer surplus could raise the costs or augment the benefits of the standards. Because the OMEGA model does not presently estimate such impacts, the EPA is investigating the feasibility of developing an adjunct to the OMEGA model to make such estimates. This project is an effort to develop and test a candidate model. The project statement of work spells out the key functional requirements for the new model.

  4. Fuel Economy: What Drives Consumer Choice?

    E-Print Network [OSTI]

    Turrentine, Tom; Kurani, Kenneth S; Heffner, Reid R.

    2008-01-01

    Car Buyers and Fuel Economy? ” Energy Policy, vol. 35, 2007.Fuel Economy: What Drives Consumer Choice? BY TOMyou think about fuel economy? ” Rather, we listened closely

  5. Fuel Economy: What Drives Consumer Choice?

    E-Print Network [OSTI]

    Turrentine, Tom; Kurani, Kenneth; Heffner, Rusty

    2007-01-01

    Car Buyers and Fuel Economy? ” Energy Policy, vol. 35, 2007.Fuel Economy: What Drives Consumer Choice? BY TOMyou think about fuel economy? ” Rather, we listened closely

  6. Accident analysis and DOE criteria

    SciTech Connect (OSTI)

    Graf, J.M.; Elder, J.C.

    1982-01-01

    In analyzing the radiological consequences of major accidents at DOE facilities one finds that many facilities fall so far below the limits of DOE Order 6430 that compliance is easily demonstrated by simple analysis. For those cases where the amount of radioactive material and the dispersive energy available are enough for accident consequences to approach the limits, the models and assumptions used become critical. In some cases the models themselves are the difference between meeting the criteria or not meeting them. Further, in one case, we found that not only did the selection of models determine compliance but the selection of applicable criteria from different chapters of Order 6430 also made the difference. DOE has recognized the problem of different criteria in different chapters applying to one facility, and has proceeded to make changes for the sake of consistency. We have proposed to outline the specific steps needed in an accident analysis and suggest appropriate models, parameters, and assumptions. As a result we feed DOE siting and design criteria will be more fairly and consistently applied.

  7. Complex Goal Criteria and Its Application in DesigntoCriteria Scheduling \\Lambday

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Complex Goal Criteria and Its Application in Design­to­Criteria Scheduling \\Lambday Thomas Wagner for satisficing to best meet the criteria. In the context of the Design­to­Criteria task scheduling paradigm, we specification and corre­ sponding evaluation mechanism are used throughout the Design­to­Criteria scheduling

  8. Complex Goal Criteria and Its Application in Design-to-Criteria Scheduling y

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Complex Goal Criteria and Its Application in Design-to-Criteria Scheduling y Thomas Wagner Computer for satis cing to best meet the criteria. In the context of the Design-to-Criteria task scheduling paradigm speci cation and corre- sponding evaluation mechanism are used throughout the Design-to-Criteria

  9. Choice Inconsistencies among the Elderly: Evidence from Plan Choice in the Medicare Part D Program

    E-Print Network [OSTI]

    Abaluck, Jason

    We evaluate the choices of elders across their insurance options under the Medicare Part D Prescription Drug plan, using a unique dataset of prescription drug claims matched to information on the characteristics of choice ...

  10. Future Implications of China's Energy-Technology Choices

    E-Print Network [OSTI]

    ................................................................................................. 17 3.3.5 Hydroelectric Power

  11. Postfeminist Technologies: Digital Media and the Culture Industries of Choice

    E-Print Network [OSTI]

    Cohn, Jonathan

    2013-01-01

    referred to, even on Wikipedia, as the “porn mode. ” 19 Thisto allow users to view porn online without your browseropponent primarily rents S&M porn and films glorifying mass

  12. Nuclear Reactor Safety Design Criteria

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1993-01-19

    The order establishes nuclear safety criteria applicable to the design, fabrication, construction, testing, and performance requirements of nuclear reactor facilities and safety class structures, systems, and components (SSCs) within these facilities. Cancels paragraphs 8a and 8b of DOE 5480.6. Cancels DOE O 5480.6 in part. Supersedes DOE 5480.1, dated 1-19-93. Certified 11-18-10.

  13. Repository operational criteria comparative analysis

    SciTech Connect (OSTI)

    Hageman, J.P.; Chowdhury, A.H. [Southwest Research Inst., San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses

    1994-06-01

    The objective of the ``Repository Operational Criteria (ROC) Feasibility Studies`` (or ROC task) was to conduct comprehensive and integrated analyses of repository design, construction, and operations criteria in 10 CFR Part 60 regulations considering the interfaces among the components of the regulations and impacts of any potential changes to those regulations. The ROC task addresses regulatory criteria and uncertainties related to the preclosure aspects of the geologic repository. Those parts of 10 CFR Part 60 that require routine guidance or minor changes to the rule were addressed in Hageman and Chowdhury, 1992. The ROC task shows a possible need for further regulatory clarity, by major changes to the rule, related to the design bases and siting of a geologic repository operations area and radiological emergency planning in order to assure defense-in-depth. The analyses, presented in this report, resulted in the development and refinement of regulatory concepts and their supporting rationale for recommendations for potential major changes to 10 CFR Pan 0 regulations.

  14. Berkeley Lab scientists develop criteria for $20 million energy challenge

    ScienceCinema (OSTI)

    Walker, Iain

    2013-05-29

    Berkeley Labs Iain Walker and his colleagues in environmental energy research helped the Siebel Foundation develop the criteria for its Energy Free Home Challenge, which comes with a $20 million global incentive prize. The Challenge is a competition to create a new generation of systems and technologies for practical homes that realize a net-zero, non-renewable energy footprint without increasing the cost of ownership. It is open to everyone everywhere ? university teams to handymen and hobbyists.

  15. Berkeley Lab scientists develop criteria for $20 million energy challenge

    SciTech Connect (OSTI)

    Walker, Iain

    2009-01-01

    Berkeley Labs Iain Walker and his colleagues in environmental energy research helped the Siebel Foundation develop the criteria for its Energy Free Home Challenge, which comes with a $20 million global incentive prize. The Challenge is a competition to create a new generation of systems and technologies for practical homes that realize a net-zero, non-renewable energy footprint without increasing the cost of ownership. It is open to everyone everywhere — university teams to handymen and hobbyists.

  16. Multiple Criteria Decision Support by Evolutionary Computation

    E-Print Network [OSTI]

    Zitzler, Eckart

    1 Multiple Criteria Decision Support by Evolutionary Computation Marco Laumanns, Eckart Zitzler difficult or impossible. In addition, they can handle multiple criteria simultaneously, being able to gener of these variables form the set of decision alternatives. The criteria to judge each decision relate to the output

  17. Lighting Choices - White Background | Department of Energy

    Energy Savers [EERE]

    Choices - White Background Image icon All of these lightbulbs-CFLs, LEDs, and energy-saving incandescents-meet the new energy standards that take effect from 2012-2014. More...

  18. Fuel Economy: What Drives Consumer Choice?

    E-Print Network [OSTI]

    Turrentine, Tom; Kurani, Kenneth; Heffner, Rusty

    2007-01-01

    S. Kurani, “Car Buyers and Fuel Economy? ” Energy Policy,Fuel Economy: What Drives Consumer Choice? BY TOMa car, do they think about fuel costs over time, are they

  19. Idaho CERCLA Disposal Facility Complex Waste Acceptance Criteria

    SciTech Connect (OSTI)

    W. Mahlon Heileson

    2006-10-01

    The Idaho Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Disposal Facility (ICDF) has been designed to accept CERCLA waste generated within the Idaho National Laboratory. Hazardous, mixed, low-level, and Toxic Substance Control Act waste will be accepted for disposal at the ICDF. The purpose of this document is to provide criteria for the quantities of radioactive and/or hazardous constituents allowable in waste streams designated for disposal at ICDF. This ICDF Complex Waste Acceptance Criteria is divided into four section: (1) ICDF Complex; (2) Landfill; (3) Evaporation Pond: and (4) Staging, Storage, Sizing, and Treatment Facility (SSSTF). The ICDF Complex section contains the compliance details, which are the same for all areas of the ICDF. Corresponding sections contain details specific to the landfill, evaporation pond, and the SSSTF. This document specifies chemical and radiological constituent acceptance criteria for waste that will be disposed of at ICDF. Compliance with the requirements of this document ensures protection of human health and the environment, including the Snake River Plain Aquifer. Waste placed in the ICDF landfill and evaporation pond must not cause groundwater in the Snake River Plain Aquifer to exceed maximum contaminant levels, a hazard index of 1, or 10-4 cumulative risk levels. The defined waste acceptance criteria concentrations are compared to the design inventory concentrations. The purpose of this comparison is to show that there is an acceptable uncertainty margin based on the actual constituent concentrations anticipated for disposal at the ICDF. Implementation of this Waste Acceptance Criteria document will ensure compliance with the Final Report of Decision for the Idaho Nuclear Technology and Engineering Center, Operable Unit 3-13. For waste to be received, it must meet the waste acceptance criteria for the specific disposal/treatment unit (on-Site or off-Site) for which it is destined.

  20. A Practical Method for Transforming Free-Text Eligibility Criteria into Computable Criteria

    E-Print Network [OSTI]

    Peleg, Mor

    of studies. At the design stage, study investigators could query a library of computable criteria to help1 A Practical Method for Transforming Free-Text Eligibility Criteria into Computable Criteria eligibility criteria in a computer-interpretable language would facilitate eligibility determination for study

  1. A practical method for transforming free-text eligibility criteria into computable criteria

    E-Print Network [OSTI]

    Rubin, Daniel L.

    -interpretable the eligibility criteria which de- fine the target populations of studies. At the design stage, studyA practical method for transforming free-text eligibility criteria into computable criteria Samson criteria Clinical trials Natural-language processing Ontology OWL Relational databases a b s t r a c

  2. Evaluation Criteria for PDIL Proposal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submitKansasCommunitiesof Energy8) Wigner Home ·the Effect andCriteria for PDIL

  3. A Plug-in Hybrid Consumer Choice Model with Detailed Market Segmentation

    SciTech Connect (OSTI)

    Lin, Zhenhong [ORNL] [ORNL; Greene, David L [ORNL] [ORNL

    2010-01-01

    This paper describes a consumer choice model for projecting U.S. demand for plug-in hybrid electric vehicles (PHEV) in competition among 13 light-duty vehicle technologies over the period 2005-2050. New car buyers are disaggregated by region, residential area, attitude toward technology risk, vehicle usage intensity, home parking and work recharging. The nested multinomial logit (NMNL) model of vehicle choice incorporates daily vehicle usage distributions, refueling and recharging availability, technology learning by doing, and diversity of choice among makes and models. Illustrative results are presented for a Base Case, calibrated to the Annual Energy Outlook (AEO) 2009 Reference Updated Case, and an optimistic technology scenario reflecting achievement of U.S. Department of Energy s (DOE s) FreedomCAR goals. PHEV market success is highly dependent on the degree of technological progress assumed. PHEV sales reach one million in 2037 in the Base Case but in 2020 in the FreedomCARGoals Case. In the FreedomCARGoals Case, PHEV cumulative sales reach 1.5 million by 2015. Together with efficiency improvements in other technologies, petroleum use in 2050 is reduced by about 45% from the 2005 level. After technological progress, PHEV s market success appears to be most sensitive to recharging availability, consumers attitudes toward novel echnologies, and vehicle usage intensity. Successful market penetration of PHEVs helps bring down battery costs for electric vehicles (EVs), resulting in a significant EV market share after 2040.

  4. Development of criteria used to establish a background environmental monitoring station

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Fritz, Brad G.; Barnett, J. Matthew; Snyder, Sandra F.; Bisping, Lynn E.; Rishel, Jeremy P.

    2015-03-02

    It is generally considered necessary to measure concentrations of contaminants-of-concern at a background location when conducting atmospheric environmental surveillance. This is because it is recognized that measurements of background concentrations can enhance interpretation of environmental monitoring data. Despite the recognized need for background measurements, there is little published guidance available that describes how to identify an appropriate atmospheric background monitoring location. This paper develops generic criteria that can guide the decision making process for identifying suitable locations for background atmospheric monitoring station. Detailed methods for evaluating some of these criteria are also provided and a case study for establishment ofmore »an atmospheric background surveillance station as part of an environmental surveillance program is described. While the case study focuses on monitoring for radionuclides, the approach is equally valid for any airborne constituent being monitored. The case study shows that implementation of the developed criteria can result in a good, defensible choice for a background atmospheric monitoring location.« less

  5. Asynchronous or synchronous? A misleading choice. Scott Fairbanks and Simon Moore

    E-Print Network [OSTI]

    Moore, Simon

    to generate and globally distribute timing signals. The first paper questions the synchronous assumptionsAsynchronous or synchronous? A misleading choice. Scott Fairbanks and Simon Moore 15 May 2004 as the technology that will progress the art of compu- tation when the timing assumptions that hold the synchronous

  6. Range Design Criteria- June 4, 2012

    Office of Energy Efficiency and Renewable Energy (EERE)

    This document contains the currently-approved firearms "Range Design Criteria" referred to on DOE O 473.3, Protection Program Operations

  7. Vermont Small Hydropower Assistance Program Screening Criteria...

    Open Energy Info (EERE)

    Vermont Small Hydropower Assistance Program Screening Criteria Summary and Application Instructions Jump to: navigation, search OpenEI Reference LibraryAdd to library Permitting...

  8. Nevada National Security Site Waste Acceptance Criteria

    National Nuclear Security Administration (NNSA)

    Nevada National Security Site Waste Acceptance Criteria Prepared by U.S. Department of Energy National Nuclear Security Administration Nevada Field Office Environmental...

  9. Guidelines Establishing Criteria for Excluding Buildings from...

    Office of Environmental Management (EM)

    Establishing Criteria for Excluding Buildings from the Energy Performance Requirements of Section 543 of the National Energy Conservation Policy Act as Amended by the Energy Policy...

  10. Final waste forms project: Performance criteria for phase I treatability studies

    SciTech Connect (OSTI)

    Gilliam, T.M. [Oak Ridge National Lab., TN (United States); Hutchins, D.A. [Martin Marietta Energy Systems, Inc., Oak Ridge, TN (United States); Chodak, P. III [Massachusetts Institute of Technology (United States)

    1994-06-01

    This document defines the product performance criteria to be used in Phase I of the Final Waste Forms Project. In Phase I, treatability studies will be performed to provide {open_quotes}proof-of-principle{close_quotes} data to establish the viability of stabilization/solidification (S/S) technologies. This information is required by March 1995. In Phase II, further treatability studies, some at the pilot scale, will be performed to provide sufficient data to allow treatment alternatives identified in Phase I to be more fully developed and evaluated, as well as to reduce performance uncertainties for those methods chosen to treat a specific waste. Three main factors influence the development and selection of an optimum waste form formulation and hence affect selection of performance criteria. These factors are regulatory, process-specific, and site-specific waste form standards or requirements. Clearly, the optimum waste form formulation will require consideration of performance criteria constraints from each of the three categories. Phase I will focus only on the regulatory criteria. These criteria may be considered the minimum criteria for an acceptable waste form. In other words, a S/S technology is considered viable only if it meet applicable regulatory criteria. The criteria to be utilized in the Phase I treatability studies were primarily taken from Environmental Protection Agency regulations addressed in 40 CFR 260 through 265 and 268; and Nuclear Regulatory Commission regulations addressed in 10 CFR 61. Thus the majority of the identified criteria are independent of waste form matrix composition (i.e., applicable to cement, glass, organic binders etc.).

  11. Sustainability: Preserving Choice for the Army

    E-Print Network [OSTI]

    Hall, Sharon J.

    Sustainability: Preserving Choice for the Army Friday, October 19, 2012 12:00 - 1:30 p.m. (lunch will be provided) Wrigley Hall, Room 481 Richard Kidd Deputy Assistant of the Army, Energy and Sustainability infrastructure. The development of Army-wide sustainability principles coupled with investments, training

  12. |Sustainable energy choices: comparing the options

    E-Print Network [OSTI]

    for addressing these growing service demands, each of which has its attractions. Energy efficiency reduces are not renewable, but the resource can endure for centuries and is a high quality form of energy that can7 |Sustainable energy choices: comparing the options O ver the next century and beyond humans

  13. INTELLIGENT ENERGY CHOICES Lori L. Scarlatos1

    E-Print Network [OSTI]

    Scarlatos, Lori

    of their energy choices. We have developed an agent-based simulation in which the world's twenty-five most populous countries are represented by autonomous agents. Using initial data from the World Bank and other described in this paper relies on real data from the World Bank [5] to establish both initial values

  14. Natural Gas Vehicle Webinar: Technology, Best Strategies, and Lessons Learned

    Broader source: Energy.gov [DOE]

    This Clean Cities program webinar elaborates first on successful past technology choices and then suggests future technological pathways that can be taken for the United States to expand its use of...

  15. Criteria for exact qudit universality

    SciTech Connect (OSTI)

    Brennen, Gavin K. [National Institute of Standards and Technology, Atomic Physics Division, Gaithersburg, Maryland 20899-8420 (United States); O'Leary, Dianne P. [University of Maryland, Department of Computer Science, Collge Park, Maryland 20742 (United States); National Institute of Standards and Technology, Mathematical and Computational Sciences Division, Gaithersburg, Maryland 20899-8910 (United States); Bullock, Stephen S. [National Institute of Standards and Technology, Mathematical and Computational Sciences Division, Gaithersburg, Maryland 20899-8910 (United States)

    2005-05-15

    We describe criteria for implementation of quantum computation in qudits. A qudit is a d-dimensional system whose Hilbert space is spanned by states vertical bar 0>, vertical bar 1>, ..., vertical bar d-1>. An important earlier work [A. Muthukrishnan and C.R. Stroud, Jr., Phys. Rev. A 62, 052309 (2000)] describes how to exactly simulate an arbitrary unitary on multiple qudits using a 2d-1 parameter family of single qudit and two qudit gates. That technique is based on the spectral decomposition of unitaries. Here we generalize this argument to show that exact universality follows given a discrete set of single qudit Hamiltonians and one two-qudit Hamiltonian. The technique is related to the QR-matrix decomposition of numerical linear algebra. We consider a generic physical system in which the single qudit Hamiltonians are a small collection of H{sub jk}{sup x}=({Dirac_h}/2{pi}){omega}(vertical bar k>

  16. Modeling learning when alternative technologies are learning & resource constrained : cases In semiconductor & advanced automotive manufacturing

    E-Print Network [OSTI]

    Rand-Nash, Thomas

    2012-01-01

    When making technology choice decisions, firms must consider technology costs over time. In many industries, technology costs have been shown to decrease over time due to (a) improvements in production efficiency and the ...

  17. CriteriaDirected Task Scheduling \\Lambda y Thomas Wagner

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    to task scheduling called Design­to­Criteria that controls the combinatorics via a satisficing methodology and custom designs schedules to meet a particular client's goal criteria. In Design­to­ Criteria, criteria the scheduling problem tractable. We describe the interesting facets of the Design­to­Criteria approach and give

  18. Immobilization technology down-selection radiation barrier approach

    SciTech Connect (OSTI)

    Gray, L.W.; Gould, T.H.

    1997-05-23

    Six immobilization technology projects variants, previously selected for evaluation during the PEIS/ROD process, have been evaluated with respect to the nine basic criteria for fissile materials disposition. Metrics for the criteria were developed to facilitate a comparative analysis of the technology variants. The six technology variants are grouped according to their radiation barrier approach. Information and data for the technology options were provided by limited experimental studies, definitions of process flowsheets, and preliminary evaluations of facility concepts and costs.

  19. Opening criteria for accelerated paving techniques 

    E-Print Network [OSTI]

    Johnson, Jason Leonard

    1993-01-01

    Fast track paving or accelerated pavement design is the rapid replacement of portland cement concrete pavement, allowing for the reopening to traffic under specific time requirements. The purpose of this research is to develop opening criteria...

  20. Ambient Air Quality Criteria (Manitoba, Canada)

    Broader source: Energy.gov [DOE]

    The Manitoba Ambient Air Quality Criteria schedule lists maximum time-based pollutant concentration levels for the protection and preservation of ambient air quality within the Province of Manitoba...

  1. Facility Representative Program, Criteria & Review Approach Documents

    Office of Energy Efficiency and Renewable Energy (EERE)

    This page provides Criteria Review and Approach Documents (CRADS) to assist Facility Representatives. Please submit your CRADS for posting by sending them to the HQ FR Program Manager. Please include the subject, date, and a contact person.

  2. Electronic Records Management Software Applications Design Criteria...

    Broader source: Energy.gov (indexed) [DOE]

    records in the Department of Defense. Electronic Records Management Software Applications Design Criteria Standard More Documents & Publications DOE-STD-4001-2000 DOE O 243.1B,...

  3. Performance Criteria for Residential Zero Energy Windows

    E-Print Network [OSTI]

    Arasteh, Dariush; Goudey, Howdy; Huang, Joe; Kohler, Christian; Mitchell, Robin

    2006-01-01

    that the energy requirements for today’s typical efficientproducts typical of today’s Energy Star level (#3,#4) areproducts typically sold today to meet Energy Star criteria.

  4. No Effects of Psychosocial Stress on Intertemporal Choice

    E-Print Network [OSTI]

    Haushofer, Johannes

    Intertemporal choices - involving decisions which trade off instant and delayed outcomes - are often made under stress. It remains unknown, however, whether and how stress affects intertemporal choice. We subjected 142 ...

  5. Lighting Choices to Save You Money | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Choices to Save You Money Lighting Choices to Save You Money August 31, 2015 - 7:56am Addthis An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if...

  6. A power algebra of games of choice Ingrid Rewitzky

    E-Print Network [OSTI]

    Jipsen, Peter

    A power algebra of games of choice Ingrid Rewitzky Department of Mathematics and Applied as forming a power algebra of the power set Boolean algebra of outcomes. Allowing a set of possible starting the power algebra of games of choice. With this algebraic view of simple games of choice we invoke (a

  7. Costs influence male mate choice in a freshwater fish

    E-Print Network [OSTI]

    Keogh, Scott

    Costs influence male mate choice in a freshwater fish Bob B. M. Wong* and Michael D. Jennions that female mate choice decisions depend on the direct costs of choosing (either because of search costs or male-imposed costs). Far less is known about how direct fitness costs affect male mate choice. We

  8. CRAD, Criteria and Guidelines For the Assessment of Safety System...

    Energy Savers [EERE]

    Criteria and Guidelines For the Assessment of Safety System Software and Firmware at Defense Nuclear Facilities CRAD, Criteria and Guidelines For the Assessment of Safety System...

  9. An Empirical Study of Alternative Fuel Vehicle Choice by Commercial Fleets: Lessons in Transportation Choices, and Public Agencies' Organization

    E-Print Network [OSTI]

    Crane, Soheila Soltani

    1996-01-01

    and safety are the primary NGV concern. The resale value ischoice (choices are EV, NGV, methanol, and gasoline) based

  10. First Choice Power | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar2-0057-EA Jump to:ofEnia SpA JumpGmbHFerrisFillmoreChoice Power Jump to:

  11. Choice Electric Co | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OFAMERICA'SHeavy Electricals Ltd BHEL JumpCMNACelt PowerWindThreeWindChofuChoice

  12. DOE Standard: Fire protection design criteria

    SciTech Connect (OSTI)

    Not Available

    1999-07-01

    The development of this Standard reflects the fact that national consensus standards and other design criteria do not comprehensively or, in some cases, adequately address fire protection issues at DOE facilities. This Standard provides supplemental fire protection guidance applicable to the design and construction of DOE facilities and site features (such as water distribution systems) that are also provided for fire protection. It is intended to be used in conjunction with the applicable building code, National Fire Protection Association (NFPA) Codes and Standards, and any other applicable DOE construction criteria. This Standard replaces certain mandatory fire protection requirements that were formerly in DOE 5480.7A, ``Fire Protection``, and DOE 6430.1A, ``General Design Criteria``. It also contains the fire protection guidelines from two (now canceled) draft standards: ``Glove Box Fire Protection`` and ``Filter Plenum Fire Protection``. (Note: This Standard does not supersede the requirements of DOE 5480.7A and DOE 6430.1A where these DOE Orders are currently applicable under existing contracts.) This Standard, along with the criteria delineated in Section 3, constitutes the basic criteria for satisfying DOE fire and life safety objectives for the design and construction or renovation of DOE facilities.

  13. Technology Assessment TECHNOLOGY ASSESSMENT

    E-Print Network [OSTI]

    Rock, Chris

    Technology Assessment 10/14/2004 1 TECHNOLOGY ASSESSMENT STRATEGIC PLAN MISSION STATEMENT Support the Mission of Texas Tech University and the TTU Information Technology Division by providing timely and relevant information and assistance in current and emerging technologies and their practical applications

  14. Bioscience Technology Bioscience Technology

    E-Print Network [OSTI]

    Vertes, Akos

    Bioscience Technology Bioscience Technology Advantage Business Media 100 Enterprise Drive Rockaway, co-director of George Washington University's Institute for Proteomics Technology and Applications-by-point. Manufacturers have stampeded to offer the new technology. Applied Biosystems got out in front in 2004 when

  15. Statistical criteria for characterizing irradiance time series.

    SciTech Connect (OSTI)

    Stein, Joshua S.; Ellis, Abraham; Hansen, Clifford W.

    2010-10-01

    We propose and examine several statistical criteria for characterizing time series of solar irradiance. Time series of irradiance are used in analyses that seek to quantify the performance of photovoltaic (PV) power systems over time. Time series of irradiance are either measured or are simulated using models. Simulations of irradiance are often calibrated to or generated from statistics for observed irradiance and simulations are validated by comparing the simulation output to the observed irradiance. Criteria used in this comparison should derive from the context of the analyses in which the simulated irradiance is to be used. We examine three statistics that characterize time series and their use as criteria for comparing time series. We demonstrate these statistics using observed irradiance data recorded in August 2007 in Las Vegas, Nevada, and in June 2009 in Albuquerque, New Mexico.

  16. Revisting Some Design Criteria Diarmuid O'Driscoll

    E-Print Network [OSTI]

    Ramirez, Donald E.

    Revisting Some Design Criteria Diarmuid O'Driscoll diarmuid.odriscoll@mic.ul.ie Head, Department optimality criteria (A, D, and E) are useful measures for comparing competing designs. The criteria are all proposed other techniques to complement these existing criteria, such as the fraction of design space tech

  17. Hanford Site solid waste acceptance criteria

    SciTech Connect (OSTI)

    Ellefson, M.D.

    1998-07-01

    Order 5820.2A requires that each treatment, storage, and/or disposal facility (referred to in this document as TSD unit) that manages low-level or transuranic waste (including mixed waste and TSCA PCB waste) maintain waste acceptance criteria. These criteria must address the various requirements to operate the TSD unit in compliance with applicable safety and environmental requirements. This document sets forth the baseline criteria for acceptance of radioactive waste at TSD units operated by WMH. The criteria for each TSD unit have been established to ensure that waste accepted can be managed in a manner that is within the operating requirements of the unit, including environmental regulations, DOE Orders, permits, technical safety requirements, waste analysis plans, performance assessments, and other applicable requirements. Acceptance criteria apply to the following TSD units: the Low-Level Burial Grounds (LLBG) including both the nonregulated portions of the LLBG and trenches 31 and 34 of the 218-W-5 Burial Ground for mixed waste disposal; Central Waste Complex (CWC); Waste Receiving and Processing Facility (WRAP); and T Plant Complex. Waste from all generators, both from the Hanford Site and from offsite facilities, must comply with these criteria. Exceptions can be granted as provided in Section 1.6. Specific waste streams could have additional requirements based on the 1901 identified TSD pathway. These requirements are communicated in the Waste Specification Records (WSRds). The Hanford Site manages nonradioactive waste through direct shipments to offsite contractors. The waste acceptance requirements of the offsite TSD facility must be met for these nonradioactive wastes. This document does not address the acceptance requirements of these offsite facilities.

  18. Hanford Site Solid Waste Acceptance Criteria

    SciTech Connect (OSTI)

    Not Available

    1993-11-17

    This manual defines the Hanford Site radioactive, hazardous, and sanitary solid waste acceptance criteria. Criteria in the manual represent a guide for meeting state and federal regulations; DOE Orders; Hanford Site requirements; and other rules, regulations, guidelines, and standards as they apply to acceptance of radioactive and hazardous solid waste at the Hanford Site. It is not the intent of this manual to be all inclusive of the regulations; rather, it is intended that the manual provide the waste generator with only the requirements that waste must meet in order to be accepted at Hanford Site TSD facilities.

  19. NEVADA TEST SITE WASTE ACCEPTANCE CRITERIA

    SciTech Connect (OSTI)

    U.S. DEPARTMENT OF ENERGY, NATIONAL NUCLEAR SECURITY ADMINISTRATION, NEVADA SITE OFFICE

    2005-07-01

    This document establishes the U. S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive and mixed waste for disposal. Mixed waste generated within the State of Nevada by NNSA/NSO activities is accepted for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the Nevada Test Site Area 3 and Area 5 Radioactive Waste Management Site for storage or disposal.

  20. Nevada Test Site Waste Acceptance Criteria

    SciTech Connect (OSTI)

    U. S. Department of Energy, National Nuclear Security Administration Nevada Site Office

    2005-10-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive (LLW) and mixed waste (MW) for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NTS Area 3 and Area 5 Radioactive Waste Management Complex (RWMC) for storage or disposal.

  1. Officials launch Carbon Fiber Technology Facility, announce

    E-Print Network [OSTI]

    , who is assistant secretary for Energy Efficiency & Renewable Energy, announced the launch of the Clean Energy Manufacturing Initiative, an effort to bolster U.S. competitiveness in producing clean energy technologies and increasing energy productivity. "Our nation faces a stark choice: The energy technologies

  2. Nevada Test Site Waste Acceptance Criteria (NTSWAC)

    SciTech Connect (OSTI)

    NNSA /NSO Waste Management Project

    2008-06-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, Nevada Test Site Waste Acceptance Criteria (NTSWAC). The NTSWAC provides the requirements, terms, and conditions under which the Nevada Test Site will accept low-level radioactive (LLW) and LLW Mixed Waste (MW) for disposal.

  3. Neighborhood design and vehicle type choice: Evidence from Northern California

    E-Print Network [OSTI]

    Cao, X Y; Mokhtarian, Patricia L; Handy, S L

    2006-01-01

    type choices (e.g. , Beggs and Cardell, 1980; Berkovec andWadsworth Publishing Company. Beggs, S. D. and Cardell, S.

  4. Battery Choices for Different Plug-in HEV Configurations (Presentation)

    SciTech Connect (OSTI)

    Pesaran, A.

    2006-07-12

    Presents battery choices for different plug-in hybrid electric vehicle (HEV) configurations to reduce cost and to improve performance and life.

  5. Choices and Requirements of Batteries for EVs, HEVs, PHEVs (Presentation)

    SciTech Connect (OSTI)

    Pesaran, A. A.

    2011-04-01

    This presentation describes the choices available and requirements for batteries for electric vehicles, hybrid electric vehicles, plug-in hybrid electric vehicles.

  6. Polyhedral Methods for Adaptive Choice-Based Conjoint Analysis

    E-Print Network [OSTI]

    Toubia, Olivier

    2003-02-26

    Choice-based conjoint analysis (CBC) is used widely in marketing for product design, segmentation, and marketing strategy. We propose and test a new "polyhedral" ...

  7. Multiple Criteria Analysis and Water Resources Risk

    E-Print Network [OSTI]

    Nebraska-Lincoln, University of

    risk Quality of life Health Noncancer risk Costs Cost Technology availability Health risk Testing Management factors Environmental quality Treatment Chemical performance Fairness Cost of technology & Management 48:6, 2005 · Evaluation of drinking water treatment technology: An entropy-based fuzzy application

  8. MAE SPECIFIC PROFESSIONAL SCHOOL COURSE REQUIREMENTS ME Specific AE Specifi Eng Eng Abet Outcomes Criteria Criteria

    E-Print Network [OSTI]

    those courses marked AERO. Eng Eng Abet Outcomes Criteria Criteria Course No. Course Title Primary MAE 4733 Mechatronics Design MAE 3113, 3403 X 1 2 X X X X X X X X X X X MAE 4223 Aero Engr Lab AE reqt Projects MAE 3113, 3323 X X 4 0 X X X X X X X X X X X X MAE 4354 Aero Systems Design ME MAE 3113, 3323

  9. Marine and Hydrokinetic Technology Database

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    DOE’s Marine and Hydrokinetic Technology Database provides up-to-date information on marine and hydrokinetic renewable energy, both in the U.S. and around the world. The database includes wave, tidal, current, and ocean thermal energy, and contains information on the various energy conversion technologies, companies active in the field, and development of projects in the water. Depending on the needs of the user, the database can present a snapshot of projects in a given region, assess the progress of a certain technology type, or provide a comprehensive view of the entire marine and hydrokinetic energy industry. Results are displayed as a list of technologies, companies, or projects. Data can be filtered by a number of criteria, including country/region, technology type, generation capacity, and technology or project stage. The database was updated in 2009 to include ocean thermal energy technologies, companies, and projects.

  10. Reviving Magnet Schools: Strengthening a Successful Choice Option

    E-Print Network [OSTI]

    Siegel-Hawley, Genevieve; Frankenberg, Erica

    2012-01-01

    criteria dampened MSAP grantees’ ability to reduce orsurvey recipients were MSAP grantees from one of the lastin evidence for MSAP grantees In addition to increased

  11. Nevada National Security Site Waste Acceptance Criteria

    SciTech Connect (OSTI)

    NSTec Environmental Management

    2011-01-01

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NNSSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NNSS Area 3 and Area 5 Radioactive Waste Management Complex for disposal. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project at (702) 295-7063 or fax to (702) 295-1153.

  12. Nevada National Security Site Waste Acceptance Criteria

    SciTech Connect (OSTI)

    NSTec Environmental Management

    2010-09-03

    This document establishes the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept low-level radioactive waste and mixed low-level waste for disposal. The NNSSWAC includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NNSS Area 3 and Area 5 Radioactive Waste Management Complex for disposal. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project at (702) 295-7063 or fax to (702) 295-1153.

  13. Functional Area Criteria & Review Approach Documents

    Broader source: Energy.gov [DOE]

    CRADS provided on this page are provided as examples of functional area Objectives and Criteria used to evaluate how requirements are meet. They are only examples and should not be utilized as is. In accordance with DOE Standard 3006-2010, CRADs should be developed by team members to reflect the specifics of the proposed review (i.e., breadth and depth) as defined in the approved Plan of Action.

  14. Bicycle traffic planning and design criteria 

    E-Print Network [OSTI]

    Vathana, Jhirasak

    1975-01-01

    BICYCLE TRAFFIC PLANNING AND DESIGN CRITERIA A Thesis JHIRASAK VATHANA Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE May 1975 Major Subject...: Interdisciplinary Engineering BICYCLE TRAFFIC PLANNING AND DESIGN CRITER1A A Thesis DHIRASAK VATHANA Approved as to style and content by: Chairman of Committee (Head of epartment) j 'j (Memb ) (Member) (Member) May l975 ABSTRACT Bicycle Traffic Planning...

  15. Software Engineering Management: strategic choices in a new decade

    E-Print Network [OSTI]

    Finkelstein, Anthony

    Software Engineering Management: strategic choices in a new decade Barbara Farbey & Anthony.farbey|a.finkelstein}@ucl.ac.uk 1. ABSTRACT This paper discusses the strategic choices faced by software engineering managers and organisational advances in software engineering and in its application. For the software engineering manager

  16. Blue Choice New EnglandSM Summary of Benefits

    E-Print Network [OSTI]

    Aalberts, Daniel P.

    Blue Choice New EnglandSM Summary of Benefits Williams College An Association of Independent Blue Cross and Blue Shield Plans This health plan meets Minimum Creditable Coverage Standards Reform Law. #12;Your Care Your Primary Care Provider. When you enroll in Blue Choice New England, you

  17. Measuring Transactions Costs from Observed Behavior: Market Choices in Peru

    E-Print Network [OSTI]

    Sadoulet, Elisabeth

    Measuring Transactions Costs from Observed Behavior: Market Choices in Peru Renos Vakis, Elisabeth Sadoulet, and Alain de Janvry October 2003 Abstract Farmers incur proportional and fixed transactions costs these transactions costs. When opportunities exist to sell a crop on alternative markets, the observed choice

  18. Acceptance Criteria Framework for Autonomous Biological Detectors

    SciTech Connect (OSTI)

    Dzenitis, J M

    2006-12-12

    The purpose of this study was to examine a set of user acceptance criteria for autonomous biological detection systems for application in high-traffic, public facilities. The test case for the acceptance criteria was the Autonomous Pathogen Detection System (APDS) operating in high-traffic facilities in New York City (NYC). However, the acceptance criteria were designed to be generally applicable to other biological detection systems in other locations. For such detection systems, ''users'' will include local authorities (e.g., facility operators, public health officials, and law enforcement personnel) and national authorities [including personnel from the Department of Homeland Security (DHS), the BioWatch Program, the Centers for Disease Control and Prevention (CDC), and the Federal Bureau of Investigation (FBI)]. The panel members brought expertise from a broad range of backgrounds to complete this picture. The goals of this document are: (1) To serve as informal guidance for users in considering the benefits and costs of these systems. (2) To serve as informal guidance for developers in understanding the needs of users. In follow-up work, this framework will be used to systematically document the APDS for appropriateness and readiness for use in NYC.

  19. Automated Validation of Trusted Digital Repository Assessment Criteria

    E-Print Network [OSTI]

    Smith, MacKenzie

    The RLG/NARA trusted digital repository (TDR) certification checklist defines a set of assessment criteria for preservation environments. The criteria can be mapped into data management policies that define how a digital ...

  20. Time-Dependent Capital Budgeting with Multiple Criteria

    E-Print Network [OSTI]

    Klamroth, Kathrin

    of attention by economists, management scientists, industrial engineers, operations researchers et al. 8 . More recent papers proposed multiple criteria capital budgeting mod- els extended such as transportation planning, conservation biology, packaging and loading. The bi-criteria knapsack problem BCKP

  1. Choice set as an indicator for choice behavior when lanes are managed with value pricing 

    E-Print Network [OSTI]

    Mastako, Kimberley Allen

    2005-02-17

    -74)..............................................................................................62 Table 7.1 Chi-Square Tests of Equal Mode, Time, and Route Shares............................71 Table 7.2 Chi-Square Tests of Equal Gender Shares......................................................73 Table 7.3 Women: Chi-Square Tests of Equal Mode... choice sets are established and each commuter is assumed to choose from one of the four sets. In this study, a sample of travelers from the State Route 91 (SR-91) value-priced corridor in Orange County, California, who participated in a telephone...

  2. Structural acceptance criteria Remote Handling Building Tritium Extraction Facility

    SciTech Connect (OSTI)

    Mertz, G.

    1999-12-16

    This structural acceptance criteria contains the requirements for the structural analysis and design of the Remote Handling Building (RHB) in the Tritium Extraction Facility (TEF). The purpose of this acceptance criteria is to identify the specific criteria and methods that will ensure a structurally robust building that will safely perform its intended function and comply with the applicable Department of Energy (DOE) structural requirements.

  3. Enhancing Reuse of Structured Eligibility Criteria and Supporting their Relaxation.

    E-Print Network [OSTI]

    van Harmelen, Frank

    in different trials, and the design of eligibility criteria for new trials. We do this by introducing: formalizing eligibility criteria, supporting trial design, semantic annotation, populating ontology from textEnhancing Reuse of Structured Eligibility Criteria and Supporting their Relaxation. Krystyna Milian

  4. Contingency Analysis in the DesigntoCriteria Computer Science Department

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Contingency Analysis in the Design­to­Criteria Scheduler Anita Raja Computer Science Department University of Massachusetts October 9, 1998 Abstract The Design­to­Criteria scheduler is a domain independent also implement method reordering techniques to minimize uncertainty. 1 Introduction The Design­to­Criteria

  5. Leveraging Uncertainty in Design-to-Criteria Scheduling Thomas Wagner

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Leveraging Uncertainty in Design-to-Criteria Scheduling Thomas Wagner Computer Science Department Technical Report 1997-11 January 20, 1996 Abstract Design-to-Criteria scheduling is the process of custom to achieve tasks and sub- tasks. Formerly, Design-to-Criteria scheduling relied on simple expected value

  6. Leveraging Uncertainty in DesigntoCriteria Scheduling \\Lambda Thomas Wagner

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Leveraging Uncertainty in Design­to­Criteria Scheduling \\Lambda Thomas Wagner Computer Science Computer Science Technical Report 1997­11 January 20, 1996 Abstract Design­to­Criteria scheduling that describes alternate ways to achieve tasks and sub­ tasks. Formerly, Design­to­Criteria scheduling relied

  7. Approximation Algorithms for Multi-criteria Traveling Salesman Problems

    E-Print Network [OSTI]

    Al Hanbali, Ahmad

    +3-42 +, respectively. Moreover, we design ran- domized approximation algorithms for multi-criteria () -ATSP (ratio 1 2. Therefore, we design randomized approximation schemes for multi-criteria cycle cover problems by showingApproximation Algorithms for Multi-criteria Traveling Salesman Problems Bodo Manthey1 and L

  8. Patterns of Clinical Trial Eligibility Criteria Krystyna Milian1

    E-Print Network [OSTI]

    ten Teije, Annette

    trials and design of eligibility criteria. In this study we addressed the problem of formalizing for future work related to the formalization of eligibility criteria and supporting their design. 2Patterns of Clinical Trial Eligibility Criteria Krystyna Milian1 , Annette ten Teije1 , Anca Bucur2

  9. GENERAL EDUCATION COURSES AREA DESIGNATIONS CRITERIA AND GOALS

    E-Print Network [OSTI]

    GENERAL EDUCATION COURSES AREA DESIGNATIONS CRITERIA AND GOALS (revised July 2003, accepted March to receive that designation. ANALYTICAL AND QUANTITATIVE THOUGHT - (A) 1. Criteria: a. Courses designated "A. HUMANITIES - (H) 1. Criteria: a. Courses designated "H" concentrate on the expression, analysis

  10. The choice: evaluating and selecting scientific proposals

    E-Print Network [OSTI]

    Navarra, Antonio

    2015-01-01

    The selection process of proposals is a crucial component of scientific progress and innovations. Limited resources must be allocated in the most effective way to maximise advancements and the production of new knowledge, especially as it is becoming increasingly clear that technological and scientific innovation and creativity is an instrument of economic policy and social development. The traditional approach based on merit evaluation by experts has been the preferred method, but there is an issue regarding to what extent such a method can also be an instrument of effective policy. This paper discuss some of the basic processes involved in the evaluation and selection of proposals, indicating some criterion for an optimal solution.

  11. Enhanced Sampling and Analysis, Selection of Technology for Testing

    SciTech Connect (OSTI)

    Svoboda, John; Meikrantz, David

    2010-02-01

    The focus of this study includes the investigation of sampling technologies used in industry and their potential application to nuclear fuel processing. The goal is to identify innovative sampling methods using state of the art techniques that could evolve into the next generation sampling and analysis system for metallic elements. This report details the progress made in the first half of FY 2010 and includes a further consideration of the research focus and goals for this year. Our sampling options and focus for the next generation sampling method are presented along with the criteria used for choosing our path forward. We have decided to pursue the option of evaluating the feasibility of microcapillary based chips to remotely collect, transfer, track and supply microliters of sample solutions to analytical equipment in support of aqueous processes for used nuclear fuel cycles. Microchip vendors have been screened and a choice made for the development of a suitable microchip design followed by production of samples for evaluation by ANL, LANL, and INL on an independent basis.

  12. Faience Technology

    E-Print Network [OSTI]

    Nicholson, Paul

    2009-01-01

    by Joanne Hodges. Faience Technology, Nicholson, UEE 2009Egyptian materials and technology, ed. Paul T. Nicholson,Nicholson, 2009, Faience Technology. UEE. Full Citation:

  13. DATE: NVLAP LAB CODE: INFORMATION TECHNOLOGY SECURITY TESTING

    E-Print Network [OSTI]

    DATE: NVLAP LAB CODE: INFORMATION TECHNOLOGY SECURITY TESTING TEST PROCEDURE SELECTION LIST/2014 Testing based on criteria in 45 CFR Part 170, Health Information Technology: Standards, Implementation to the Permanent Certification Program for Health Information Technology; Final Rule (September 4, 2012). Complete

  14. Yield criteria for quasibrittle and frictional materials

    E-Print Network [OSTI]

    Davide Bigoni; Andrea Piccolroaz

    2010-10-09

    A new yield/damage function is proposed for modelling the inelastic behaviour of a broad class of pressure-sensitive, frictional, ductile and brittle-cohesive materials. The yield function allows the possibility of describing a transition between the shape of a yield surface typical of a class of materials to that typical of another class of materals. This is a fundamental key to model the behaviour of materials which become cohesive during hardening (so that the shape of the yield surface evolves from that typical of a granular material to that typical of a dense material), or which decrease cohesion due to damage accumulation. The proposed yield function is shown to agree with a variety of experimental data relative to soil, concrete, rock, metallic and composite powders, metallic foams, porous metals, and polymers. The yield function represents a single, convex and smooth surface in stress space approaching as limit situations well-known criteria and the extreme limits of convexity in the deviatoric plane. The yield function is therefore a generalization of several criteria, including von Mises, Drucker-Prager, Tresca, modified Tresca, Coulomb-Mohr, modified Cam-clay, and --concerning the deviatoric section-- Rankine and Ottosen. Convexity of the function is proved by developing two general propositions relating convexity of the yield surface to convexity of the corresponding function. These propositions are general and therefore may be employed to generate other convex yield functions.

  15. Nevada National Security Site Waste Acceptance Criteria

    SciTech Connect (OSTI)

    none,

    2013-06-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept the following: • DOE hazardous and non-hazardous non-radioactive classified waste • DOE low-level radioactive waste (LLW) • DOE mixed low-level waste (MLLW) • U.S. Department of Defense (DOD) classified waste The LLW and MLLW listed above may also be classified waste. Classified waste is the only waste accepted for disposal that may be non-radioactive and shall be required to meet the waste acceptance criteria for radioactive waste as specified in this document. Classified waste may be sent to the NNSS as classified matter. Section 3.1.18 provides the requirements that must be met for permanent burial of classified matter. The NNSA/NFO and support contractors are available to assist the generator in understanding or interpreting this document. For assistance, please call the NNSA/NFO Environmental Management Operations (EMO) at (702) 295-7063, and the call will be directed to the appropriate contact.

  16. Nevada National Security Site Waste Acceptance Criteria

    SciTech Connect (OSTI)

    NSTec Environmental Management

    2012-02-28

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO), Nevada National Security Site Waste Acceptance Criteria (NNSSWAC). The NNSSWAC provides the requirements, terms, and conditions under which the Nevada National Security Site (NNSS) will accept DOE non-radioactive classified waste, DOE non-radioactive hazardous classified waste, DOE low-level radioactive waste (LLW), DOE mixed low-level waste (MLLW), and U.S. Department of Defense (DOD) classified waste for permanent disposal. Classified waste is the only waste accepted for disposal that may be non-radioactive and will be required to meet the waste acceptance criteria for radioactive waste as specified in this document. The NNSA/NSO and support contractors are available to assist you in understanding or interpreting this document. For assistance, please call the NNSA/NSO Waste Management Project (WMP) at (702) 295-7063, and your call will be directed to the appropriate contact.

  17. FRACTURE FAILURE CRITERIA OF SOFC PEN STRUCTURE

    SciTech Connect (OSTI)

    Liu, Wenning N.; Sun, Xin; Khaleel, Mohammad A.; Qu, Jianmin

    2007-04-30

    Thermal stresses and warpage of the PEN are unavoidable due to the temperature changes from the stress-free sintering temperature to room temperature and mismatch of the coefficients of thermal expansion (CTE) of various layers in the PEN structures of solid oxide fuel cells (SOFC) during the PEN manufacturing process. In the meantime, additional mechanical stresses will also be created by mechanical flattening during the stack assembly process. The porous nature of anode and cathode in the PEN structures determines presence of the initial flaws and crack on the interfaces of anode/electrolyte/cathode and in the interior of the materials. The sintering/assembling induced stresses may cause the fracture failure of PEN structure. Therefore, fracture failure criteria for SOFC PEN structures is developed in order to ensure the structural integrity of the cell and stack of SOFC. In this paper, the fracture criteria based on the relationship between the critical energy release rate and critical curvature and maximum displacement of the warped cells caused by the temperature changes as well as mechanical flattening process is established so that possible failure of SOFC PEN structures may be predicted deterministically by the measurement of the curvature and displacement of the warped cells.

  18. Choice modeling of relook tasks for UAV search missions

    E-Print Network [OSTI]

    Bertuccelli, Luca F.

    This paper addresses human decision-making in supervisory control of a team of unmanned vehicles performing search missions. Previous work has proposed the use of a two-alternative choice framework, in which operators ...

  19. The Quantitative Genetics of Mate Choice Evolution: Theory and Empiricism 

    E-Print Network [OSTI]

    Ratterman, Nicholas 1981-

    2012-11-15

    emerged. From a theoretical standpoint, the nature of the genetic covariance built up by the process of mate choice has received considerable attention, though the models still make biologically unrealistic assumptions. Empirically, the difficulty...

  20. Attitudes towards mode choice in Switzerland Bilge Atasoy

    E-Print Network [OSTI]

    Bierlaire, Michel

    Attitudes towards mode choice in Switzerland Bilge Atasoy Aur´elie Glerum Michel Bierlaire 31st, Switzerland, {bilge.kucuk, aurelie.glerum, michel.bierlaire}@epfl.ch 1 #12;1 Introduction Transport mode

  1. A Nonparametric Approach to Modeling Choice with Limited Data

    E-Print Network [OSTI]

    Farias, Vivek F.

    Choice models today are ubiquitous across a range of applications in operations and marketing. Real-world implementations of many of these models face the formidable stumbling block of simply identifying the “right” model ...

  2. A Data-Driven Approach to Modeling Choice

    E-Print Network [OSTI]

    Farias, Vivek F.

    2009-01-01

    We visit the following fundamental problem: For a 'generic' model of consumer choice (namely, distributions over preference lists) and a limited amount of data on how consumers actually make decisions (such as marginal ...

  3. Factors Affecting Cotton Producers' Choice of Marketing Outlet 

    E-Print Network [OSTI]

    Pace, Jason 1979-

    2012-08-16

    In recent years, changes in government policies, supply and demand fundamentals and price patterns in the cotton market have led to several shifts in how producers market their cotton. This thesis examined producer cash marketing choices, including...

  4. Frequently Asked Questions: Lighting Choices to Save You Money...

    Broader source: Energy.gov (indexed) [DOE]

    be available to save you money. Q: When will the new bulbs be phased in? A: Newer energy-saving lightbulb choices that save about 25% to 75% in energy costs are on the market...

  5. Lighting Choices to Save You Money Banner | Department of Energy

    Energy Savers [EERE]

    to Save You Money Banner Lighting Choices to Save You Money Banner All of these lightbulbs-CFLs, LEDs, and energy-saving incandescents-meet the new energy standards that take...

  6. Leading by Example: Argonne Senior Management Makes "Green" Vehicle Choices

    ScienceCinema (OSTI)

    Peters, Mark; Kearns, Paul;

    2013-04-19

    Argonne's senior management shows leadership in the sustainability arena with their own personal choices in "green" vehicles. They don't just talk the talk ? they walk the walk.

  7. Leading by Example: Argonne Senior Management Makes "Green" Vehicle Choices

    SciTech Connect (OSTI)

    Peters, Mark; Kearns, Paul

    2011-01-01

    Argonne's senior management shows leadership in the sustainability arena with their own personal choices in "green" vehicles. They don't just talk the talk — they walk the walk.

  8. Considering representational choices of fourth graders when solving division problems 

    E-Print Network [OSTI]

    Gilbert, Mary Chiles

    2007-09-17

    CONSIDERING REPRESENTATIONAL CHOICES OF FOURTH GRADERS WHEN SOLVING DIVISION PROBLEMS A Thesis by MARY CHILES GILBERT Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree... of MASTER OF SCIENCE May 2006 Major Subject: Curriculum & Instruction CONSIDERING REPRESENTATIONAL CHOICES OF FOURTH GRADERS WHEN SOLVING DIVISION PROBLEMS A Thesis by MARY CHILES GILBERT Submitted to the Office of Graduate...

  9. Technical guidance for siting criteria development

    SciTech Connect (OSTI)

    Aldrich, D.C.; Sprung, J.L.; Alpert, D.J.; Diegert, K.; Ostmeyer, R.M.; Ritchie, L.T.; Strip, D.R.; Johnson, J.D.; Hansen, K.; Robinson, J.

    1982-12-01

    Technical guidance to support the formulation and comparison of possible siting criteria for nuclear power plants has been developed in four areas: (1) consequences of hypothetical severe nuclear-power-plant accidents, (2) characteristics of population distributions about current reactor sites, (3) site availability within the continental United States, and (4) socioeconomic impacts of reactor siting. The impact on consequences of source-term magnitude, meteorology, population distribution, and emergency response have been analyzed. Population distributions about current sites were analyzed to identify statistical characteristics, time trends, and regional differences. A site-availability data bank was constructed for the continential United States. The data bank contains information about population densities, seismicity, topography, water availability, and land-use restrictions. Finally, the socioeconomic impacts of rural-industrialization projects, energy boomtowns, and nuclear power plants were examined to determine their nature, magnitude, and dependence on site demography and remoteness.

  10. A review of macroscopic ductile failure criteria.

    SciTech Connect (OSTI)

    Corona, Edmundo; Reedlunn, Benjamin

    2013-09-01

    The objective of this work was to describe several of the ductile failure criteria com- monly used to solve practical problems. The following failure models were considered: equivalent plastic strain, equivalent plastic strain in tension, maximum shear, Mohr- Coulomb, Wellman's tearing parameter, Johnson-Cook and BCJ MEM. The document presents the main characteristics of each failure model as well as sample failure predic- tions for simple proportional loading stress histories in three dimensions and in plane stress. Plasticity calculations prior to failure were conducted with a simple, linear hardening, J2 plasticity model. The resulting failure envelopes were plotted in prin- cipal stress space and plastic strain space, where the dependence on stress triaxiality and Lode angle are clearly visible. This information may help analysts select a ductile fracture model for a practical problem and help interpret analysis results.

  11. Customer-Specific Taste Parameters and Mixed Logit: Households' Choice of Electricity Supplier

    E-Print Network [OSTI]

    Revelt, David; Train, Kenneth

    2000-01-01

    M a y 2000 Keywords: energy suppliers, mixed logit, tastecustomers' choice among energy suppliers in conjoint-typecustomers' choice o f energy supplier and estimate the value

  12. Building a library of eligibility criteria to support design of clinical trials

    E-Print Network [OSTI]

    van Harmelen, Frank

    Building a library of eligibility criteria to support design of clinical trials Krystyna Milian1 the design of eligibility criteria, enable the reuse of well-structured criteria and to provide meaningful, Eligibility criteria, Formalization of eligibility criteria, Sup- porting design of eligibility criteria 1

  13. Inelastic analysis acceptance criteria for radioactive material transportation containers

    SciTech Connect (OSTI)

    Ammerman, D.J.; Ludwigsen, J.S.

    1993-06-01

    The design criteria currently used in the design of radioactive material (RAM) transportation containers are taken from the ASME Boiler and Pressure Vessel Code (ASME, 1992). These load-based criteria are ideally suited for pressure vessels where the loading is quasistatic and all stresses are in equilibrium with externally applied loads. For impact events, the use of load-based criteria is less supportable. Impact events tend to be energy controlled, and thus, energy-based acceptance criteria would appear to be more appropriate. Determination of an ideal design criteria depends on what behavior is desired. Currently there is not a design criteria for inelastic analysis for RAM nation packages that is accepted by the regulatory agencies. This lack of acceptance criteria is one of the major factors in limiting the use of inelastic analysis. In this paper inelastic analysis acceptance criteria based on stress and strain-energy density will be compared for two stainless steel test units subjected to impacts onto an unyielding target. Two different material models are considered for the inelastic analysis, a bilinear fit of the stress-strain curve and a power law hardening model that very closely follows the stress-strain curve. It is the purpose of this paper to stimulate discussion and research into the area of strain-energy density based inelastic analysis acceptance criteria.

  14. On Slip Transmission Criteria in Experiments and Crystal Plasticity Models

    E-Print Network [OSTI]

    Bayerschen, E; Reddy, B D; Böhlke, T

    2015-01-01

    A comprehensive overview is given on the slip transmission criteria for grain boundaries in the experimental literature, with a focus on slip system and grain boundary orientation. The use of these geometric criteria in continuum crystal plasticity models is briefly discussed. Perspectives on additional experimentally motivated criteria used in computational simulations are given. The theoretical framework of Gurtin (2008, J. Mech. Phys. Solids 56, p. 640) is reviewed for the single slip case with the aim of showing explicitly the connections to the experimentally developed criteria for slip transmission that are not discussed in the work itself.

  15. Readiness Review Training- Development of Criteria And Review Approach Documents

    Broader source: Energy.gov [DOE]

    Slides used for November 8-9, 2010 Readiness Review Training - Development of Criteria And Review Approach Documents at the Idaho National Laboratory.

  16. Oregon Procedure and Criteria for Hazardous Waste Treatment,...

    Open Energy Info (EERE)

    Oregon Procedure and Criteria for Hazardous Waste Treatment, Storage or Disposal Permits Fact Sheet Jump to: navigation, search OpenEI Reference LibraryAdd to library Permitting...

  17. Texas PUCT Substantive Rule 25.101, Certification Criteria, Electric...

    Open Energy Info (EERE)

    Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Texas PUCT Substantive Rule 25.101, Certification Criteria, Electric Substantive Rules Jump...

  18. Catalog of publications, Office of Science and Technology (Office of Water, Environmental Protection Agency), 1999 edition

    SciTech Connect (OSTI)

    1999-08-01

    This catalog focuses on the following: Introduction to the Office of Science and Technology (OST); Industrial Effluent Limitations and Guidelines (Listed alphabetically by Point Source); Water Quality Standards; Ambient Water Quality Criteria; Biological Quality Criteria; Nutrient Criteria; Equilibrium Partitioning Sediment Guidelines (Sediment Quality Criteria); Drinking Water Criteria; Drinking Water Health Advisories; Water Quality Modeling and Total Maximum Daily Loads Guidance; Analytical Laboratory Methods; Contaminated Sediments; Fish Tissue Quality; Municipal Sewage Sludge; Great Lakes Guidance; Beach Water Quality; Pollution Prevention-IP3 Reports; Videotapes; and Datafiles and Software.

  19. Oakland Operations Office, Oakland, California: Technology summary

    SciTech Connect (OSTI)

    Not Available

    1994-11-01

    DOE`s Office of Technology Development manages an aggressive national program for applied research, development, demonstration, testing, and evaluation. This program develops high, payoff technologies to clean up the inventory of DOE nuclear component manufacturing sites and to manage DOE-generated waste faster, safer, and cheaper than current environmental cleanup technologies. OTD programs are designed to make new, innovative, and more effective technologies available for transfer to users through progressive development. Projects are demonstrated, tested, and evaluated to produce solutions to current problems. Transition of technologies into more advanced stages of development is based upon technological, regulatory, economic, and institutional criteria. New technologies are made available for use in eliminating radioactive, hazardous, and other wastes in compliance with regulatory mandates. The primary goal is to protect human health and prevent further contamination. OTD technologies address three specific problem areas: (1) groundwater and soils cleanup; (2) waste retrieval and processing; and (3) pollution prevention.

  20. Contending Parties: A Logistic Choice Analysis of Inter- and Intra-group Blog Citation Dynamics in the 2004 US Presidential Election

    E-Print Network [OSTI]

    Almquist, Zack W

    2011-01-01

    The 2004 US Presidential Election cycle marked the debut of Internet-based media such as blogs and social networking websites as institutionally recognized features of the American political landscape. Using a longitudinal sample of all DNC/RNC-designated blog-citation networks we are able to test the influence of various strategic, institutional, and balance-theoretic mechanisms and exogenous factors such as seasonality and political events on the propensity of blogs to cite one another over time. Capitalizing on the temporal resolution of our data, we utilize an autoregressive network regression framework to carry out inference for a logistic choice process. Using a combination of deviance-based model selection criteria and simulation-based model adequacy tests, we identify the combination of processes that best characterizes the choice behavior of the contending blogs.

  1. Normal Conducting CLIC Technology

    E-Print Network [OSTI]

    Jensen, E

    2006-01-01

    The CLIC (Compact Linear Collider) multi-lateral study group based at CERN is studying the technology for an electron-positron linear collider with a centre-of-mass energy up to 5 TeV. In contrast to the International Linear Collider (ILC) study which has chosen to use super-conducting cavities with accelerating gradients in the range of 30-40 MV/m to obtain centre-of-mass collision energies of 0.5-1 TeV, the CLIC study aims to use a normal-conducting system based on two-beam technology with gradients of 150 MV/m. It is generally accepted that this change in technology is not only necessary but the only viable choice for a cost-effective multi-TeV collider. The CLIC study group is studying the technology issues of such a machine, and is in particular developing state-of-the-art 30 GHz molybdenum-iris accelerating structures and power extraction and transfer structures (PETS). The accelerating structure has a new geometry which includes fully-profiled RF surfaces optimised to minimize surface fields, and hybri...

  2. Multi-criteria Decision Making in Embedded System Design

    E-Print Network [OSTI]

    Zitzler, Eckart

    Multi-criteria Decision Making in Embedded System Design Simon K¨unzli, Lothar Thiele and Eckart. On the other hand, this ap- proach sacrifices almost all other quality criteria of a design. As a consequence Zitzler Abstract This chapter introduces design space exploration as one of the major tasks in embedded

  3. UCL Criteria, p. 1 UNIVERSITY OF CONNECTICUT LIBRARIES

    E-Print Network [OSTI]

    Alpay, S. Pamir

    UCL Criteria, p. 1 UNIVERSITY OF CONNECTICUT LIBRARIES CRITERIA FOR APPOINTMENT AND PROMOTION cultivate new skills and knowledge for the betterment of the University of Connecticut Libraries and the University of Connecticut. Summary of Promotional Process Professional librarians participate in a voluntary

  4. Exploration Technologies - Technology Needs Assessment

    SciTech Connect (OSTI)

    Greene, Amanda I.; Thorsteinsson, Hildigunnur; Reinhardt, Tim; Solomon, Samantha; James, Mallory

    2011-06-01

    This assessment is a critical component of ongoing technology roadmapping efforts, and will be used to guide the Geothermal Technology Program's research and development.

  5. MICROSIMULATION OF RESIDENTIAL LAND DEVELOPMENT AND HOUSEHOLD LOCATION CHOICES

    E-Print Network [OSTI]

    Kockelman, Kara M.

    maximization and bid-rent theory, this paper investigates single-family residential location choices of new distribution). On the demand side, individual households (characterized by size, income, and presence and land owners maximize profits and/or rents. The simulation analysis offers insights into key features

  6. Emotion Regulation Choice: A Conceptual Framework and Supporting Evidence

    E-Print Network [OSTI]

    Gross, James J.

    Emotion Regulation Choice: A Conceptual Framework and Supporting Evidence Gal Sheppes Tel Aviv that remains virtually unexplored is that of emotion regulation. This is surprising given that healthy adaptation requires flexibly choosing between regulation strategies in a manner that is responsive

  7. MIT Computer Science & Artificial Intelligence Laboratory The Choices We Make

    E-Print Network [OSTI]

    Durand, Frédo

    MIT Computer Science & Artificial Intelligence Laboratory The Choices We Make Frédo Durand MIT CSAIL #12;MIT Computer Science & Artificial Intelligence Laboratory Introduction · My background ­ Math Computer Science & Artificial Intelligence Laboratory Introduction · I don't build tools, I am an academic

  8. Financial Flexibility, Risk Management, and Payout Choice* Alice Adams Bonaim

    E-Print Network [OSTI]

    University of Technology, Sydney

    Financial Flexibility, Risk Management, and Payout Choice* Alice Adams Bonaimé University.hankins@uky.edu Jarrad Harford University of Washington Email: jarrad@uw.edu August 2011 Abstract: Risk management of hedging and for other determinants of payout policy and risk management, including institutional ownership

  9. ENHANCING DISCRETE CHOICE DEMAND MODELING FOR DECISION-BASED DESIGN

    E-Print Network [OSTI]

    Chen, Wei

    the Decision-Based Design framework. Even though demand modeling techniques exist in market research, little design, in particular that facilitates engineering decision-making. In market research, two major demand1 ENHANCING DISCRETE CHOICE DEMAND MODELING FOR DECISION-BASED DESIGN In Press of ASME Journal

  10. State Regulators Promote Consumer Choice in Retail Gas Markets

    Reports and Publications (EIA)

    1996-01-01

    Restructuring of interstate pipeline companies has created new choices and challenges for local distribution companies (LDCs), their regulators, and their customers. The process of separating interstate pipeline gas sales from transportation service has been completed and has resulted in greater gas procurement options for LDCs.

  11. Master of Arts in Psychology PSYCHOLOGY CONCENTRATION CHOICE & RESEARCH INTERESTS

    E-Print Network [OSTI]

    Olszewski Jr., Edward A.

    Master of Arts in Psychology PSYCHOLOGY CONCENTRATION CHOICE & RESEARCH INTERESTS Directions. Please indicate the concentration to which you are applying: General Psychology (GEN) Applied Behavior Analysis (ABA) Substance Abuse Treatment Psychology (SATP) 2. Using a scale of 1 to 5 (where 1

  12. A Statistical Model for Near-Synonym Choice DIANA INKPEN

    E-Print Network [OSTI]

    Inkpen, Diana

    experiments in using supervised learning for this task. We present an application to an intelligent thesaurus, intelligent thesaurus ACM Reference Format: Inkpen, D. 2007. A statistical model for near-synonym choice. ACM applications. The first one is an intelligent thesaurus. A writer can access a thesaurus to retrieve words

  13. The ``Alternative'' Choice of Constitutive Exons throughout Evolution

    E-Print Network [OSTI]

    Pupko, Tal

    The ``Alternative'' Choice of Constitutive Exons throughout Evolution Galit Lev-Maor1[ , Amir Goren of Neurobiochemistry, Tel Aviv University, Tel Aviv, Israel Alternative cassette exons are known to originate from two by which constitutively spliced exons become alternative cassette exons during evolution. We compiled

  14. Applications of formal model choice to archaeological chronology building

    E-Print Network [OSTI]

    Sahu, Sujit K

    Applications of formal model choice to archaeological chronology building Sujit K. Sahu, Faculty important than in the analysis and interpretation of chronological data, especially when information from several sources must be drawn together. Di#11;erent statistical models may, however, provide widely di#11

  15. The role of domestic energy choices in building social resilience

    E-Print Network [OSTI]

    Painter, Kevin

    The role of domestic energy choices in building social resilience: Joined-up Scotland working in Buildings #12;Integrating a) thermal mass and b) renewable energy into modelling - New Joint PhDs Kevin Bowe · Fees · Energy for manufacture · Transport of products 2. Unstable markets 3. Smaller markets pond

  16. Thermally Activated Technologies Technology Roadmap, May 2003...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Thermally Activated Technologies Technology Roadmap, May 2003 Thermally Activated Technologies Technology Roadmap, May 2003 The purpose of this Technology Roadmap is to outline a...

  17. A Framework for Human Performance Criteria for Advanced Reactor Operational Concepts

    SciTech Connect (OSTI)

    Jacques V Hugo; David I Gertman; Jeffrey C Joe

    2014-08-01

    This report supports the determination of new Operational Concept models needed in support of the operational design of new reactors. The objective of this research is to establish the technical bases for human performance and human performance criteria frameworks, models, and guidance for operational concepts for advanced reactor designs. The report includes a discussion of operating principles for advanced reactors, the human performance issues and requirements for human performance based upon work domain analysis and current regulatory requirements, and a description of general human performance criteria. The major findings and key observations to date are that there is some operating experience that informs operational concepts for baseline designs for SFR and HGTRs, with the Experimental Breeder Reactor-II (EBR-II) as a best-case predecessor design. This report summarizes the theoretical and operational foundations for the development of a framework and model for human performance criteria that will influence the development of future Operational Concepts. The report also highlights issues associated with advanced reactor design and clarifies and codifies the identified aspects of technology and operating scenarios.

  18. Operational-Condition-Independent Criteria Dedicated to Monitoring Wind Turbine Generators: Preprint

    SciTech Connect (OSTI)

    Yang, W.; Sheng, S.; Court, R.

    2012-08-01

    To date the existing wind turbine condition monitoring technologies and commercially available systems have not been fully accepted for improving wind turbine availability and reducing their operation and maintenance costs. One of the main reasons is that wind turbines are subject to constantly varying loads and operate at variable rotational speeds. As a consequence, the influences of turbine faults and the effects of varying load and speed are coupled together in wind turbine condition monitoring signals. So, there is an urgent need to either introduce some operational condition de-coupling procedures into the current wind turbine condition monitoring techniques or develop a new operational condition independent wind turbine condition monitoring technique to maintain high turbine availability and achieve the expected economic benefits from wind. The purpose of this paper is to develop such a technique. In the paper, three operational condition independent criteria are developed dedicated for monitoring the operation and health condition of wind turbine generators. All proposed criteria have been tested through both simulated and practical experiments. The experiments have shown that these criteria provide a solution for detecting both mechanical and electrical faults occurring in wind turbine generators.

  19. Emission allowances and utility compliance choices: Market development and regulatory response

    SciTech Connect (OSTI)

    South, D.W.; Bailey, K.A. [Argonne National Lab., IL (United States); McDermott, K.A. [Illinois State Univ., Normal, IL (United States). Center for Regulatory Studies

    1992-05-01

    This paper will examine the multifaceted goals and problems of states and utilities relative to compliance with Title IV of the Clean Air Act Amendments of 1990, and in particular as they pertain to the development and functioning of the allowance market together with utility pollution control and power generation technology choice. Section 2 presents possible utility compliance strategies along with possible barriers that utilities may confront regarding the development of a SO{sub 2} allowance market. Section 3 discusses current regulatory barriers and requirements being implemented by state PUCs, and Section 4 offers some policy recommendations to achieve the goals of Title IV. Finally, Section 5 presents a summary and conclusion; Appendix A provides programs/mandates developed to date by high sulfur coal states in response to Title IV compliance requirements. (VC)

  20. Emission allowances and utility compliance choices: Market development and regulatory response

    SciTech Connect (OSTI)

    South, D.W.; Bailey, K.A. (Argonne National Lab., IL (United States)); McDermott, K.A. (Illinois State Univ., Normal, IL (United States). Center for Regulatory Studies)

    1992-01-01

    This paper will examine the multifaceted goals and problems of states and utilities relative to compliance with Title IV of the Clean Air Act Amendments of 1990, and in particular as they pertain to the development and functioning of the allowance market together with utility pollution control and power generation technology choice. Section 2 presents possible utility compliance strategies along with possible barriers that utilities may confront regarding the development of a SO{sub 2} allowance market. Section 3 discusses current regulatory barriers and requirements being implemented by state PUCs, and Section 4 offers some policy recommendations to achieve the goals of Title IV. Finally, Section 5 presents a summary and conclusion; Appendix A provides programs/mandates developed to date by high sulfur coal states in response to Title IV compliance requirements. (VC)

  1. A set of criteria to assess motivation and/or persuasion of elearning applications

    E-Print Network [OSTI]

    Desmarais, Michel C.

    criteria are common to both, and which criteria are specific to each? The objective is ultimately to design criteria are specific to each? The objective is ultimately to design an interactive persuasion criteriaA set of criteria to assess motivation and/or persuasion of elearning applications ´Eric Brangier

  2. Design-to-Criteria Scheduling: Managing Complexity through Goal-Directed Satisficing y

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Design-to-Criteria Scheduling: Managing Complexity through Goal-Directed Satisficing y Thomas-to- Criteria that controls the combinatorics via a satisficing methodology and custom designs schedules to meet a par- ticular client's goal criteria. In Design-to-Criteria, criteria- directed focusing, approximation

  3. Technology Choices for the PV Industry: A Comparative Life Cycle Assessment

    E-Print Network [OSTI]

    Boyd, Sarah; Dornfeld, David A

    2005-01-01

    2000), “Environmental Life Cycle Assessment of Solar HomePV INDUSTRY: A Comparative Life Cycle Assessment Sarah Boydinput-output life cycle assessment (EIOLCA) to capture both

  4. Market Share Elasticities for Fuel and Technology Choice in Home Heating and Cooling

    E-Print Network [OSTI]

    Wood, D.J.

    2010-01-01

    Data. Both fuel prices and capital costs are taken for the2 Price, Income, and Capital Cost Elasticities for Marketby operating and capital costs (or which are otherwise

  5. The Privacy and Safety Impact of Technology Choices for Command, Communications and

    E-Print Network [OSTI]

    Crowcroft, Jon

    of removing road tax altogether, and funding the roads entirely from usage bills. However, the deployment the economic perspective, more efficient use of road resources may be achievable. From a safety perspective, it would clearly be good to reduce road injury and death statistics below the current "9/11"'s-worth per

  6. Market Share Elasticities for Fuel and Technology Choice in Home Heating and Cooling

    E-Print Network [OSTI]

    Wood, D.J.

    2010-01-01

    Substitution Residential Energy Demand Models," MIT EnergySubstitution in Residential Energy Demand," MIT Energythe Oak Ridge Residential Energy Demand Forecasting Model,

  7. Flexible Fuel Vehicles: Providing a Renewable Fuel Choice, Vehicle Technologies Program (VTP) (Fact Sheet)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12, 2015Executive Order14,EnergyFinancingWIPPFixed Monthly1Industry - Factan

  8. Flexible Fuel Vehicles: Providing a Renewable Fuel Choice, Vehicle Technologies Program (VTP) (Fact Sheet)

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home PageBlender PumpVehiclesThe Heat Is andFederal Test

  9. NWTS program criteria for mined geologic disposal of nuclear waste: repository performance and development criteria. Public draft

    SciTech Connect (OSTI)

    1982-07-01

    This document, DOE/NWTS-33(3) is one of a series of documents to establish the National Waste Terminal Storage (NWTS) program criteria for mined geologic disposal of high-level radioactive waste. For both repository performance and repository development it delineates the criteria for design performance, radiological safety, mining safety, long-term containment and isolation, operations, and decommissioning. The US Department of Energy will use these criteria to guide the development of repositories to assist in achieving performance and will reevaluate their use when the US Nuclear Regulatory Commission issues radioactive waste repository rules.

  10. A Criteria Catalog Based Methodology for Analyzing Service Management Processes

    E-Print Network [OSTI]

    processes, using the IT Infrastructure Library (ITIL) as a best practices database, is presented the IT Infrastructure Library (ITIL) recommendations [8]. The criteria catalog itself serves as a domain--specific (re

  11. A Criteria Catalog Based Methodology for Analyzing Service Management Processes

    E-Print Network [OSTI]

    processes, using the IT Infrastructure Library (ITIL) as a best practices database, is presented (ITIL) recommendations [8]. The criteria catalog itself serves as a domain­specific (re- garding

  12. The retrofitting of existing buildings for seismic criteria

    E-Print Network [OSTI]

    Besing, Christa, 1978-

    2004-01-01

    This thesis describes the process for retrofitting a building for seismic criteria. It explains the need for a new, performance-based design code to provide a range of acceptable building behavior. It then outlines the ...

  13. Multi-attribute criteria applied to electric generation energy system analysis LDRD.

    SciTech Connect (OSTI)

    Kuswa, Glenn W.; Tsao, Jeffrey Yeenien; Drennen, Thomas E.; Zuffranieri, Jason V.; Paananen, Orman Henrie; Jones, Scott A.; Ortner, Juergen G.; Brewer, Jeffrey D.; Valdez, Maximo M.

    2005-10-01

    This report began with a Laboratory-Directed Research and Development (LDRD) project to improve Sandia National Laboratories multidisciplinary capabilities in energy systems analysis. The aim is to understand how various electricity generating options can best serve needs in the United States. The initial product is documented in a series of white papers that span a broad range of topics, including the successes and failures of past modeling studies, sustainability, oil dependence, energy security, and nuclear power. Summaries of these projects are included here. These projects have provided a background and discussion framework for the Energy Systems Analysis LDRD team to carry out an inter-comparison of many of the commonly available electric power sources in present use, comparisons of those options, and efforts needed to realize progress towards those options. A computer aid has been developed to compare various options based on cost and other attributes such as technological, social, and policy constraints. The Energy Systems Analysis team has developed a multi-criteria framework that will allow comparison of energy options with a set of metrics that can be used across all technologies. This report discusses several evaluation techniques and introduces the set of criteria developed for this LDRD.

  14. International Symposium on Fusion Nuclear Technology (ISFNT-5) SAFETY ISSUES ASSOCIATED WITH MOBILIZED ACTIVATION

    E-Print Network [OSTI]

    California at Los Angeles, University of

    of the tin component. Screening Criteria The designs under development in the APEX project are at a pre project, we have developed a set of screening criteria that are used at early stages of design to identify Symposium on Fusion Nuclear Technology (ISFNT-5) A design must adequately transfer heat from plasma

  15. Ferrocyanide Safety Program: Safety criteria for ferrocyanide watch list tanks

    SciTech Connect (OSTI)

    Postma, A.K.; Meacham, J.E.; Barney, G.S. [and others] [and others

    1994-01-01

    This report provides a technical basis for closing the ferrocyanide Unreviewed Safety Question (USQ) at the Hanford Site. Three work efforts were performed in developing this technical basis. The efforts described herein are: 1. The formulation of criteria for ranking the relative safety of waste in each ferrocyanide tank. 2. The current classification of tanks into safety categories by comparing available information on tank contents with the safety criteria; 3. The identification of additional information required to resolve the ferrocyanide safety issue.

  16. Interactions among bioenergy feedstock choices, landscape dynamics, and land use

    SciTech Connect (OSTI)

    Dale, Virginia H [ORNL; Kline, Keith L [ORNL; Wright, Lynn L [ORNL; Perlack, Robert D [ORNL; Downing, Mark [ORNL; Graham, Robin Lambert [ORNL

    2011-01-01

    Landscape implications of bioenergy feedstock choices are significant and depend on land-use practices and their environmental impacts. Although land-use changes and carbon emissions associated with bioenergy feedstock production are dynamic and complicated, lignocellulosic feedstocks may offer opportunities that enhance sustainability when compared to other transportation fuel alternatives. For bioenergy sustainability, major drivers and concerns revolve around energy security, food production, land productivity, soil carbon and erosion, greenhouse gas emissions, biodiversity, air quality, and water quantity and quality. The many implications of bioenergy feedstock choices require several indicators at multiple scales to provide a more complete accounting of effects. Ultimately, the long-term sustainability of bioenergy feedstock resources (as well as food supplies) throughout the world depends on land-use practices and landscape dynamics. Land-management decisions often invoke trade-offs among potential environmental effects and social and economic factors as well as future opportunities for resource use. The hypothesis being addressed in this paper is that sustainability of bioenergy feedstock production can be achieved via appropriately designed crop residue and perennial lignocellulosic systems. We find that decision makers need scientific advancements and adequate data that both provide quantitative and qualitative measures of the effects of bioenergy feedstock choices at different spatial and temporal scales and allow fair comparisons among available options for renewable liquid fuels.

  17. Reportable Nuclide Criteria for ORNL Waste Management Activities - 13005

    SciTech Connect (OSTI)

    McDowell, Kip; Forrester, Tim; Saunders, Mark Edward

    2013-01-01

    The U.S. Department of Energy's Oak Ridge National Laboratory (ORNL) in Oak Ridge, Tennessee generates numerous radioactive waste streams. Many of those streams contain a large number of radionuclides with an extremely broad range of concentrations. To feasibly manage the radionuclide information, ORNL developed a reportable nuclide criteria to distinguish between those nuclides in a waste stream that require waste tracking versus those nuclides of such minimal activity that do not require tracking. The criteria include tracking thresholds drawn from ORNL onsite management requirements, transportation requirements, and relevant treatment and disposal facility acceptance criteria. As a management practice, ORNL maintains waste tracking on a nuclide in a specific waste stream if it exceeds any of the reportable nuclide criteria. Nuclides in a specific waste stream that screen out as non-reportable under all these criteria may be dropped from ORNL waste tracking. The benefit of this criteria is to ensure that nuclides in a waste stream with activities which meaningfully affect safety and compliance are tracked, while documenting the basis for removing certain isotopes from further consideration.

  18. Reportable Nuclide Criteria for ORNL Radioactive Waste Management Activities - 13005

    SciTech Connect (OSTI)

    McDowell, Kip; Forrester, Tim; Saunders, Mark

    2013-07-01

    The U.S. Department of Energy's Oak Ridge National Laboratory (ORNL) in Oak Ridge, Tennessee generates numerous radioactive waste streams. Many of those streams contain a large number of radionuclides with an extremely broad range of concentrations. To feasibly manage the radionuclide information, ORNL developed reportable nuclide criteria to distinguish between those nuclides in a waste stream that require waste tracking versus those nuclides of such minimal activity that do not require tracking. The criteria include tracking thresholds drawn from ORNL onsite management requirements, transportation requirements, and relevant treatment and disposal facility acceptance criteria. As a management practice, ORNL maintains waste tracking on a nuclide in a specific waste stream if it exceeds any of the reportable nuclide criteria. Nuclides in a specific waste stream that screen out as non-reportable under all these criteria may be dropped from ORNL waste tracking. The benefit of these criteria is to ensure that nuclides in a waste stream with activities which meaningfully affect safety and compliance are tracked, while documenting the basis for removing certain isotopes from further consideration. (authors)

  19. Strain-Based Acceptance Criteria for Energy-Limited Events

    SciTech Connect (OSTI)

    Spencer D. Snow; Dana K. Morton

    2009-07-01

    The American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel (B&PV) Code was primarily written with stress-based acceptance criteria. These criteria are applicable to force, displacement, and energy-controlled loadings and ensure a factor of safety against failure. However, stress-based acceptance criteria are often quite conservative for one time energy-limited events such as accidental drops and impacts. For several years, the ASME Working Group on Design of Division 3 Containments has been developing the Design Articles for Section III, Division 3, “Containments for Transportation and Storage of Spent Nuclear Fuel and High-Level Radioactive Material and Waste,” and has wanted to establish strain-based acceptance criteria for accidental drops of containments. This Division 3 working group asked the Working Group on Design Methodology (WGDM) to assist in developing these strain-based acceptance criteria. This paper discusses the current proposed strain-based acceptance criteria, associated limitations of use, its background development, and the current status.

  20. NWTS program criteria for mined geologic disposal of nuclear waste: program objectives, functional requirements, and system performance criteria

    SciTech Connect (OSTI)

    1981-04-01

    At the present time, final repository criteria have not been issued by the responsible agencies. This document describes general objectives, requirements, and criteria that the DOE intends to apply in the interim to the National Waste Terminal Storage (NWTS) Program. These objectives, requirements, and criteria have been developed on the basis of DOE's analysis of what is needed to achieve the National objective of safe waste disposal in an environmentally acceptable and economic manner and are expected to be consistent with anticipated regulatory standards. The qualitative statements in this document address the broad issues of public and occupational health and safety, institutional acceptability, engineering feasibility, and economic considerations. A comprehensive set of criteria, general and project specific, of which these are a part, will constitute a portion of the technical basis for preparation and submittal by the DOE of formal documents to support future license applications for nuclear waste repositories.

  1. Nonreactor Nuclear Safety Design Criteria and Explosive Safety Criteria Guide for Use with DOE O 420.1, Facility Safety

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-03-28

    This Guide provides guidance on the application of requirements for nonreactor nuclear facilities and explosives facilities of Department of Energy (DOE) O 420.1, Facility Safety, Section 4.1, Nuclear and Explosives Safety Design Criteria. No cancellation.

  2. Cars and the City: An Investigation of Transportation and Residential Location Choices in New York City

    E-Print Network [OSTI]

    Salon, Deborah

    2006-01-01

    home) Income REST OF NEW YORK CITY Population Density (home)Use For Commuting in New York City with Endogenous Choice ofResidential Location Choice in New York City: A Study of the

  3. Normal Conducting CLIC Technology

    SciTech Connect (OSTI)

    Jensen, Erk

    2006-01-03

    The CLIC (Compact Linear Collider) multi-lateral study group based at CERN is studying the technology for an electron-positron linear collider with a centre-of-mass energy up to 5 TeV. In contrast to the International Linear Collider (ILC) study which has chosen to use super-conducting cavities with accelerating gradients in the range of 30-40 MV/m to obtain centre-of-mass collision energies of 0.5-1 TeV, the CLIC study aims to use a normal-conducting system based on two-beam technology with gradients of 150 MV/m. It is generally accepted that this change in technology is not only necessary but the only viable choice for a cost-effective multi-TeV collider. The CLIC study group is studying the technology issues of such a machine, and is in particular developing state-of-the-art 30 GHz molybdenum-iris accelerating structures and power extraction and transfer structures (PETS). The accelerating structure has a new geometry which includes fully-profiled RF surfaces optimised to minimize surface fields, and hybrid damping using both iris slots and radial waveguides. A newly-developed structure-optimisation procedure has been used to simultaneously balance surface fields, power flow, short and long-range transverse wakefields, RF-to-beam efficiency and the ratio of luminosity to input power. The slotted irises allow a simple structure fabrication by high-precision high-speed 3D milling of just four pieces, and an even easier bolted assembly in a vacuum chamber.

  4. High Impact Technology Catalyst: Technology Deployment Strategies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High Impact Technology Catalyst: Technology Deployment Strategies High Impact Technology Catalyst: Technology Deployment Strategies The Energy Department released the High Impact...

  5. Vehicle Technologies Office: 2014 Electric Drive Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicle Technologies Office: 2014 Electric Drive Technologies Annual Progress Report Vehicle Technologies Office: 2014 Electric Drive Technologies Annual Progress Report The...

  6. Consumer Choice and Industrial Policy: a Study of UK Energy Markets

    E-Print Network [OSTI]

    Giulietti, Monica; Waddams Price, Catherine; Waterson, Michael

    2003-01-01

    choice among retail energy suppliers: the willingness-to-payimposed for changing energy suppliers, there is a time cost

  7. National Security Technology Incubator Business Plan

    SciTech Connect (OSTI)

    None

    2007-12-31

    This document contains a business plan for the National Security Technology Incubator (NSTI), developed as part of the National Security Preparedness Project (NSPP) and performed under a Department of Energy (DOE)/National Nuclear Security Administration (NNSA) grant. This business plan describes key features of the NSTI, including the vision and mission, organizational structure and staffing, services, evaluation criteria, marketing strategies, client processes, a budget, incubator evaluation criteria, and a development schedule. The purpose of the NSPP is to promote national security technologies through business incubation, technology demonstration and validation, and workforce development. The NSTI will focus on serving businesses with national security technology applications by nurturing them through critical stages of early development. The vision of the NSTI is to be a successful incubator of technologies and private enterprise that assist the NNSA in meeting new challenges in national safety, security, and protection of the homeland. The NSTI is operated and managed by the Arrowhead Center, responsible for leading the economic development mission of New Mexico State University (NMSU). The Arrowhead Center will recruit business with applications for national security technologies recruited for the NSTI program. The Arrowhead Center and its strategic partners will provide business incubation services, including hands-on mentoring in general business matters, marketing, proposal writing, management, accounting, and finance. Additionally, networking opportunities and technology development assistance will be provided.

  8. Technology '90

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    The US Department of Energy (DOE) laboratories have a long history of excellence in performing research and development in a number of areas, including the basic sciences, applied-energy technology, and weapons-related technology. Although technology transfer has always been an element of DOE and laboratory activities, it has received increasing emphasis in recent years as US industrial competitiveness has eroded and efforts have increased to better utilize the research and development resources the laboratories provide. This document, Technology '90, is the latest in a series that is intended to communicate some of the many opportunities available for US industry and universities to work with the DOE and its laboratories in the vital activity of improving technology transfer to meet national needs. Technology '90 is divided into three sections: Overview, Technologies, and Laboratories. The Overview section describes the activities and accomplishments of the DOE research and development program offices. The Technologies section provides descriptions of new technologies developed at the DOE laboratories. The Laboratories section presents information on the missions, programs, and facilities of each laboratory, along with a name and telephone number of a technology transfer contact for additional information. Separate papers were prepared for appropriate sections of this report.

  9. Weapons and commercial plutonium ultimate disposition choices: Destroy ``completely`` or store forever

    SciTech Connect (OSTI)

    Bowman, C.D.

    1994-07-01

    All of the options under consideration for weapons and commercial plutonium disposition ultimately boil down to the choices of either ``complete`` destruction or storage ``forever.`` None of the reactor-based plutonium burning systems demonstrated over the past 50 years of reactor development consume this material completely. Ultimately considerable unburned plutonium must be stored ``forever`` from those systems. Plutonium is considered to be dangerous both as a weapons material and as a health hazard. While properly stored plutonium might never make its way back by natural phenomena into the environment as a health hazard, stored plutonium is always accessible to recovery for malevolent purposes. It must be guarded wherever in the world it is stored for as long as it continues to exist. Complete destruction of the plutonium eliminates this material as a concern of future generations. Los Alamos National Laboratory accelerator-driven technology promises to allow safe and complete destruction of this material. Furthermore it appears that in the process of destruction the neutron rich features of the weapons plutonium provides benefits to society that place a value on weapons plutonium exceeding that of highly enriched uranium. A realistic time scale for development and deployment of burial technology either with or without partial burning in reactors is expected to be comparable with or to exceed the time for development and deployment of the accelerator-driven destruction method under study at Los Alamos.

  10. IC-Compatible Technologies for Optical MEMS

    SciTech Connect (OSTI)

    Krygowski, T.W.; Sniegowski, J.J.

    1999-04-30

    Optical Micro Electro Mechanical Systems (Optical MEMS) Technology holds the promise of one-day producing highly integrated optical systems on a common, monolithic substrate. The choice of fabrication technology used to manufacture Optical MEMS will play a pivotal role in the size, functionality and ultimately the cost of optical Microsystems. By leveraging the technology base developed for silicon integrated circuits, large batches of routers, emitters, detectors and amplifiers will soon be fabricated for literally pennies per part. In this article we review the current status of technologies used for Optical MEMS, as well as fabrication technologies of the future, emphasizing manufacturable surface micromachining approaches to producing reliable, low-cost devices for optical communications applications.

  11. Choice of materials for the construction of the TRT

    E-Print Network [OSTI]

    Romaniouk, A

    1998-01-01

    This paper is mainly based on a compilation of existing experimental data and on the experience gained by the TRT collaboration over more than 8 years, concerning ageing phenomena in proportional gas chambers and radiation hardness of materials commonly used for the construction of gaseous detectors. Aspects of the impact of the choice of construction materials on the TRT straw behaviour in an environment with high radiation levels are discussed. Explicit recommendations concerning the design of the detector mechanics and of the active gas system are given wherever possible at the end of each Section.

  12. Human choice and climate change. Four volume set

    SciTech Connect (OSTI)

    Rayner, S.; Malone, E.L.

    1997-12-31

    The four-volume set assesses social science research relevant to global climate change from a wide-ranging interdisciplinary perspective. Taking human choice within social institutions as the starting point, noted researchers examine climate change issues in the context of societal issues such as population and consumption; cultural, institutional, and economic arrangements for human well-being; and the social processes by which decisions are made from local to global levels. This four-volume assessment is intended to complement the work of the intergovernmental Panel on Climate Change.

  13. Retail Choice Experiments: Comparing Early-AdopterExperience

    SciTech Connect (OSTI)

    Golove, William

    2003-03-01

    This paper reviews the experience with retail choice of non-residential electricity customers during the period from early 1998 through the first few months of 2000. Key findings include: (1) customers in California received a significantly smaller discount from utility tariffs than customers in other competitive markets; (2) this sample of large commercial/industrial customers believed they were benefiting significantly more from commodity savings from contracts with retail electricity service providers (RESP) than from value-added services; and,(3) market rules appear to be critical to customer experiences with retail competition, yet the relationship between market rules and market development is inadequately understood.

  14. Technology Assessment

    Office of Environmental Management (EM)

    capabilities that are energy efficient, low environmental impact 72 and lower cost and that are employed to manufacture technologies and products for clean energy 73...

  15. Falcon: automated optimization method for arbitrary assessment criteria

    DOE Patents [OSTI]

    Yang, Tser-Yuan (Livermore, CA); Moses, Edward I. (Livermore, CA); Hartmann-Siantar, Christine (Livermore, CA)

    2001-01-01

    FALCON is a method for automatic multivariable optimization for arbitrary assessment criteria that can be applied to numerous fields where outcome simulation is combined with optimization and assessment criteria. A specific implementation of FALCON is for automatic radiation therapy treatment planning. In this application, FALCON implements dose calculations into the planning process and optimizes available beam delivery modifier parameters to determine the treatment plan that best meets clinical decision-making criteria. FALCON is described in the context of the optimization of external-beam radiation therapy and intensity modulated radiation therapy (IMRT), but the concepts could also be applied to internal (brachytherapy) radiotherapy. The radiation beams could consist of photons or any charged or uncharged particles. The concept of optimizing source distributions can be applied to complex radiography (e.g. flash x-ray or proton) to improve the imaging capabilities of facilities proposed for science-based stockpile stewardship.

  16. Photovoltaic module certification/laboratory accreditation criteria development: Implementation handbook

    SciTech Connect (OSTI)

    Osterwald, C.R. [National Renewable Energy Laboratory, Golden, CO (United States); Hammond, R.L.; Wood, B.D.; Backus, C.E.; Sears, R.L. [Arizona State Univ., Tempe, AZ (United States); Zerlaut, G.A. [SC-International, Inc., Tempe, AZ (United States); D`Aiello, R.V. [RD Associates, Tempe, AZ (United States)

    1996-08-01

    This document covers the second phase of a two-part program. Phase I provided an overview of the structure and function of typical product certification/laboratory accreditation programs. This report (Phase H) provides most of the draft documents that will be necessary for the implementation of a photovoltaic (PV) module certification/laboratory accreditation program. These include organizational documents such as articles of incorporation, bylaws, and rules of procedure, as well as marketing and educational program documents. In Phase I, a 30-member criteria development committee was established to guide, review and reach a majority consensus regarding criteria for a PV certification/laboratory accreditation program. Committee members represented PV manufacturers, end users, standards and codes organizations, and testing laboratories. A similar committee was established for Phase II; the criteria implementation committee consisted of 29 members. Twenty-one of the Phase I committee members also served on the Phase II committee, which helped to provide program continuity during Phase II.

  17. Careers in science and technology

    SciTech Connect (OSTI)

    Not Available

    1993-09-01

    The objective of this book is to expose junior and senior high school students to the science and technology fields. It also will convey the importance of getting a general education in science and mathematics while still in high school and of continuing such studies in college. This is intended to encourge students, particularly underrepresented minorities and women, to consider and prepare for careers in science and technology. This book attempts to point out the increasing importance of such knowledge in daily life regardless of occupational choice. This book is intended to be used by junior and senior high school students, as a classroom reference by teachers, and by scientist and engineers participating in outreach activities.

  18. Science and Technology Facility

    Office of Environmental Management (EM)

    an award fee incentive program. 2. Have the award fee board members review the award fee program and criteria to ensure the criteria are workable when it comes to scoring...

  19. Composition of Model-based Test Coverage Criteria Mario Friske, Bernd-Holger Schlingloff, Stephan Weileder

    E-Print Network [OSTI]

    Schlingloff, Holger

    . Widely accepted means for assessing the quality of a test suite are coverage criteria. Criteria can detection abilities of the test suite. The result is a large variety of defined criteria for structuralComposition of Model-based Test Coverage Criteria Mario Friske, Bernd-Holger Schlingloff, Stephan

  20. ASSESSMENT OF THE DCLL TBM THERMOSTRUCTURAL RESPONSE BASED ON ITER DESIGN CRITERIA

    E-Print Network [OSTI]

    Ghoniem, Nasr M.

    ASSESSMENT OF THE DCLL TBM THERMOSTRUCTURAL RESPONSE BASED ON ITER DESIGN CRITERIA Shahram Sharafat development for operation in the ITER reactor. The DCLL TBM must satisfy the Structural Design Criteria rules (SDC-IC: Structural Design Criteria In-vessel Components 3 ). The ITER structural design criteria

  1. Technology Commercialization Showcase 2008 Vehicle Technologies Program

    SciTech Connect (OSTI)

    Davis, Patrick B.

    2009-06-19

    Presentation illustrating various technology commercialization opportunities and unexploited investment gaps for the Vehicle Technologies Program.

  2. Thermally activated technologies: Technology Roadmap

    SciTech Connect (OSTI)

    None, None

    2003-05-01

    The purpose of this Technology Roadmap is to outline a set of actions for government and industry to develop thermally activated technologies for converting America’s wasted heat resources into a reservoir of pollution-free energy for electric power, heating, cooling, refrigeration, and humidity control. Fuel flexibility is important. The actions also cover thermally activated technologies that use fossil fuels, biomass, and ultimately hydrogen, along with waste heat.

  3. Applying ALARA to cleanup criteria for a mixed waste site

    SciTech Connect (OSTI)

    MacDonell, M.; Peterson, J.; Haroun, L.; Blunt, D.; Dunning, D. [Argonne National Lab., IL (United States); Green, S. [Jacobs Engineering Group, Inc., St. Charles, MO (United States)

    1993-11-01

    The process of reducing exposures to levels as low as reasonably achievable (ALARA) is applied by the US Department of Energy (DOE) to the management of radioactive materials. A site-specific application of the ALARA process was incorporated into the development of cleanup criteria for both surface water and soil at a DOE environmental restoration site. Factoring ALARA considerations into the development of cleanup criteria demonstrated DOE`s commitment to maintaining both protectiveness and reason, and it also provided a working range for verifying residual levels after the cleanup actions have been completed.

  4. NEVADA TEST SITE WASTE ACCEPTANCE CRITERIA, JUNE 2006

    SciTech Connect (OSTI)

    U.S. DEPARTMENT OF ENERGY, NATIONAL NUCLEAR SECURITY ADMINISTRATION NEVADA SITE OFFICE

    2006-06-01

    This document establishes the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) waste acceptance criteria (WAC). The WAC provides the requirements, terms, and conditions under which the Nevada Test Site (NTS) will accept low-level radioactive (LLW) and mixed waste (MW) for disposal. It includes requirements for the generator waste certification program, characterization, traceability, waste form, packaging, and transfer. The criteria apply to radioactive waste received at the NTS Area 3 and Area 5 Radioactive Waste Management Complex (RWMC) for storage or disposal.

  5. Photovoltaic module certification/laboratory accreditation criteria development

    SciTech Connect (OSTI)

    Osterwald, C.R. [National Renewable Energy Lab., Golden, CO (United States); Hammond, R.L.; Wood, B.D.; Backus, C.E.; Sears, R.L. [Arizona State Univ., Tempe, AZ (United States); Zerlaut, G.A. [SC-International Inc., Phoenix, AZ (United States); D`Aiello, R.V. [RD Associates, Tempe, AZ (United States)

    1995-04-01

    This document provides an overview of the structure and function of typical product certification/laboratory accreditation programs. The overview is followed by a model program which could serve as the basis for a photovoltaic (PV) module certification/laboratory accreditation program. The model covers quality assurance procedures for the testing laboratory and manufacturer, third-party certification and labeling, and testing requirements (performance and reliability). A 30-member Criteria Development Committee was established to guide, review, and reach a majority consensus regarding criteria for a PV certification/laboratory accreditation program. Committee members represented PV manufacturers, end users, standards and codes organizations, and testing laboratories.

  6. Evolving treatment plan quality criteria from institution-specific experience

    SciTech Connect (OSTI)

    Ruan, D.; Shao, W.; DeMarco, J.; Tenn, S.; King, C.; Low, D.; Kupelian, P.; Steinberg, M.

    2012-05-15

    Purpose: The dosimetric aspects of radiation therapy treatment plan quality are usually evaluated and reported with dose volume histogram (DVH) endpoints. For clinical practicality, a small number of representative quantities derived from the DVH are often used as dose endpoints to summarize the plan quality. National guidelines on reference values for such quantities for some standard treatment approaches are often used as acceptance criteria to trigger treatment plan review. On the other hand, treatment prescription and planning approaches specific to each institution warrants the need to report plan quality in terms of practice consistency and with respect to institution-specific experience. The purpose of this study is to investigate and develop a systematic approach to record and characterize the institution-specific plan experience and use such information to guide the design of plan quality criteria. In the clinical setting, this approach will assist in (1) improving overall plan quality and consistency and (2) detecting abnormal plan behavior for retrospective analysis. Methods: The authors propose a self-evolving methodology and have developed an in-house prototype software suite that (1) extracts the dose endpoints from a treatment plan and evaluates them against both national standard and institution-specific criteria and (2) evolves the statistics for the dose endpoints and updates institution-specific criteria. Results: The validity of the proposed methodology was demonstrated with a database of prostate stereotactic body radiotherapy cases. As more data sets are accumulated, the evolving institution-specific criteria can serve as a reliable and stable consistency measure for plan quality and reveals the potential use of the ''tighter'' criteria than national standards or projected criteria, leading to practice that may push to shrink the gap between plans deemed acceptable and the underlying unknown optimality. Conclusions: The authors have developed a rationale to improve plan quality and consistency, by evolving the plan quality criteria from institution-specific experience, complementary to national standards. The validity of the proposed method was demonstrated with a prototype system on prostate stereotactic body radiotherapy (SBRT) cases. The current study uses direct and indirect DVH endpoints for plan quality evaluation, but the infrastructure proposed here applies to general outcome data as well. The authors expect forward evaluation together with intelligent update based on evidence-based learning, which will evolve the clinical practice for improved efficiency, consistency, and ultimately better treatment outcome.

  7. sustainable technologies

    E-Print Network [OSTI]

    Zhang, Junshan

    : · realize continuous improvements in performance (efficiency), cost and manufacturability of PV technologies, transformative PV technologies that circumvent cost/performance trade-offs and maintain compatibility with P the growing demand for energy. Photovoltaics (PV) leverages one of the 20th century's greatest scientific

  8. Improving Food Acess in South and West Berkeley: An Evaluation of the Farm Fresh Choice Farmers Market Program

    E-Print Network [OSTI]

    Messerschmidt, Matthew T

    2006-01-01

    of cancer with healthy food choices and physical activity.Cancer Research. (1997). Food, Nutrition and the Preventionin Relation to Healthy Food Choice. Journal of Consulting

  9. Preliminary waste acceptance criteria for the ICPP spent fuel and waste management technology development program

    SciTech Connect (OSTI)

    Taylor, L.L.; Shikashio, R.

    1993-09-01

    The purpose of this document is to identify requirements to be met by the Producer/Shipper of Spent Nuclear Fuel/High-LeveL Waste SNF/HLW in order for DOE to be able to accept the packaged materials. This includes defining both standard and nonstandard waste forms.

  10. Hydrogen Energy Storage and Power-to-Gas: Establishing Criteria for Successful Business Cases

    SciTech Connect (OSTI)

    Eichman, Joshua; Melaina, Marc

    2015-10-27

    As the electric sector evolves and increasing amounts of variable generation are installed on the system, there are greater needs for system flexibility, sufficient capacity and greater concern for overgeneration. As a result there is growing interest in exploring the role of energy storage and demand response technologies to support grid needs. Hydrogen is a versatile feedstock that can be used in a variety of applications including chemical and industrial processes, as well as a transportation fuel and heating fuel. Traditionally, hydrogen technologies focus on providing services to a single sector; however, participating in multiple sectors has the potential to provide benefits to each sector and increase the revenue for hydrogen technologies. The goal of this work is to explore promising system configurations for hydrogen systems and the conditions that will make for successful business cases in a renewable, low-carbon future. Current electricity market data, electric and gas infrastructure data and credit and incentive information are used to perform a techno-economic analysis to identify promising criteria and locations for successful hydrogen energy storage and power-to-gas projects. Infrastructure data will be assessed using geographic information system applications. An operation optimization model is used to co-optimizes participation in energy and ancillary service markets as well as the sale of hydrogen. From previous work we recognize the great opportunity that energy storage and power-to-gas but there is a lack of information about the economic favorability of such systems. This work explores criteria for selecting locations and compares the system cost and potential revenue to establish competitiveness for a variety of equipment configurations. Hydrogen technologies offer unique system flexibility that can enable interactions between multiple energy sectors including electric, transport, heating fuel and industrial. Previous research established that hydrogen technologies, and in particular electrolyzers, can respond fast enough and for sufficient duration to participate in electricity markets. This work recognizes that participation in electricity markets and integration with the gas system can enhance the revenue streams available for hydrogen storage systems and quantifies the economic competitiveness and of these systems. A few of the key results include 1) the most valuable revenue stream for hydrogen systems is to sell the produced hydrogen, 2) participation in both energy and ancillary service markets yields the greatest revenue and 3) electrolyzers acting as demand response devices are particularly favorable.

  11. Methods for verifying compliance with low-level radioactive waste acceptance criteria

    SciTech Connect (OSTI)

    NONE

    1993-09-01

    This report summarizes the methods that are currently employed and those that can be used to verify compliance with low-level radioactive waste (LLW) disposal facility waste acceptance criteria (WAC). This report presents the applicable regulations representing the Federal, State, and site-specific criteria for accepting LLW. Typical LLW generators are summarized, along with descriptions of their waste streams and final waste forms. General procedures and methods used by the LLW generators to verify compliance with the disposal facility WAC are presented. The report was written to provide an understanding of how a regulator could verify compliance with a LLW disposal facility`s WAC. A comprehensive study of the methodology used to verify waste generator compliance with the disposal facility WAC is presented in this report. The study involved compiling the relevant regulations to define the WAC, reviewing regulatory agency inspection programs, and summarizing waste verification technology and equipment. The results of the study indicate that waste generators conduct verification programs that include packaging, classification, characterization, and stabilization elements. The current LLW disposal facilities perform waste verification steps on incoming shipments. A model inspection and verification program, which includes an emphasis on the generator`s waste application documentation of their waste verification program, is recommended. The disposal facility verification procedures primarily involve the use of portable radiological survey instrumentation. The actual verification of generator compliance to the LLW disposal facility WAC is performed through a combination of incoming shipment checks and generator site audits.

  12. INTERSTATE WASTE TECHNOLOGIES THERMOSELECT TECHNOLOGY

    E-Print Network [OSTI]

    Columbia University

    1 INTERSTATE WASTE TECHNOLOGIES THERMOSELECT TECHNOLOGY AN OVERVIEW Presented to the DELAWARE SOLID WASTE MANAGEMENT TECHNICAL WORKING GROUP January 10, 2006 #12;2 INTERSTATE WASTE MANAGEMENT ALLIANCE and maintenance (30 years) ­ Will guarantee performance and Operation and Maintenance ­ Serves solid waste

  13. Multi-Evidence, Multi-Criteria, Lazy Associative Document Classification

    E-Print Network [OSTI]

    Zaki, Mohammed Javeed

    Multi-Evidence, Multi-Criteria, Lazy Associative Document Classification Adriano Velosoa , Wagner to be applied at classification time. Our method is able to perform evidence enhancement by link forwarding approach using documents from the ACM Digital Library and from a Brazilian Web directory. Our approach

  14. Accessing Heritage Documents according to Space Criteria within Digital Libraries

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Accessing Heritage Documents according to Space Criteria within Digital Libraries Christophe, Geographic Information Retrieval and Visualization, Non-Structured Documents, Digital Libraries, Cultural on digital libraries and proposes to extend the basic services of existing Library Management System with new

  15. Safety Criteria and Safety Lifecycle for Artificial Neural Networks

    E-Print Network [OSTI]

    Kelly, Tim

    Safety Criteria and Safety Lifecycle for Artificial Neural Networks Zeshan Kurd, Tim Kelly and Jim performance based techniques that aim to improve the safety of neural networks for safety critical for safety assurance. As a result, neural networks are typically restricted to advisory roles in safety

  16. NASA/TM2010216862 A Criteria Standard for Conflict

    E-Print Network [OSTI]

    Narkawicz, Anthony J.

    NASA/TM­2010­216862 A Criteria Standard for Conflict Resolution: A Vision for Guaranteeing, and George Hagen Langley Research Center, Hampton, Virginia October 2010 #12;NASA STI Program . . . in Profile Since its founding, NASA has been dedicated to the advancement of aeronautics and space science

  17. Earthquake design criteria for small hydro projects in the Philippines

    SciTech Connect (OSTI)

    Martin, P.P.; McCandless, D.H.; Asce, M.

    1995-12-31

    The definition of the seismic environment and seismic design criteria of more than twenty small hydro projects in the northern part of the island of Luzon in the Philippines took a special urgency on the wake of the Magnitude 7.7 earthquake that shook the island on July 17, 1990. The paper describes the approach followed to determine design shaking level criteria at each hydro site consistent with the seismic environment estimated at that same site. The approach consisted of three steps: (1) Seismicity: understanding the mechanisms and tectonic features susceptible to generate seismicity and estimating the associated seismicity levels, (2) Seismic Hazard: in the absence of an accurate historical record, using statistics to determine the expected level of ground shaking at a site during the operational 100-year design life of each Project, and (3) Criteria Selection: finally and most importantly, exercising judgment in estimating the final proposed level of shaking at each site. The resulting characteristics of estimated seismicity and seismic hazard and the proposed final earthquake design criteria are provided.

  18. Design Criteria for Bagless Transfer System (BTS) Packaging System

    SciTech Connect (OSTI)

    RISENMAY, H.R.

    2000-04-26

    This document provides the criteria for the design and installation of a Bagless Transfer System (BTS); Blend, Sieve and Balance Equipment; and Supercritical Fluid Extraction System (SFE). The project consists of 3 major modules: (1) Bagless Transfer System (BTS) Module; (2) Blend, Sieve and Balance Equipment; and (3) Supercritical Fluid Extraction (SFE) Module.

  19. Evaluation Criteria for Human-Automation Performance Birsen Donmez

    E-Print Network [OSTI]

    Cummings, Mary "Missy"

    Evaluation Criteria for Human-Automation Performance Metrics Birsen Donmez MIT Dept. of Aero(617)252-1512 missyc@mit.edu ABSTRACT Previous research has identified broad metric classes for human- automation. INTRODUCTION Human-automation teams are common in many domains, such as military operations, process control

  20. MECHANICAL ENGINEERING CRITERIA AND PROCEDURES FOR FACULTY ANNUAL REVIEW

    E-Print Network [OSTI]

    Bermúdez, José Luis

    MECHANICAL ENGINEERING CRITERIA AND PROCEDURES FOR FACULTY ANNUAL REVIEW AND POST TENURE PEER REVIEW Approved by the Mechanical Engineering Faculty, February 26, 2013 1.0 INTRODUCTION 1.1 Purpose productivity. Two review mechanisms, namely, annual review by the Mechanical Engineering (ME) Department Head

  1. Criteria & Review Approach Documents, National Nuclear Security Administration

    Broader source: Energy.gov [DOE]

    A section of Appendix C to DOE G 226.1-2A "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of a table of National Nuclear Security Administration Criteria Review and Approach Documents (CRADS) with links to the CRADs. CRADs provide a recommended approach and the types of information to gather to assess elements of a DOE contractor's programs.

  2. Criteria Review and Approach Documents, National Nuclear Security Administration

    Broader source: Energy.gov [DOE]

    A section of Appendix C to DOE G 226.1-2A "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of National Nuclear Security Administration Criteria Review and Approach Documents (CRADS). CRADs provide a recommended approach and the types of information to gather to assess elements of a DOE contractor's programs.

  3. Cost Transfer Review Criteria Revised: 01/28/2011

    E-Print Network [OSTI]

    Oviedo, Néstor J.

    Cost Transfer Review Criteria Revised: 01/28/2011 Cost transfers should contain sufficient. The cost transfer narrative should include enough detail to determine who or what the cost transfer relates to, the type of cost transferred, where the cost is transferred from and to, when the cost

  4. Project Title: Evaluating Criteria of Play in Entertainment Products

    E-Print Network [OSTI]

    Hickman, Mark

    Project Title: Evaluating Criteria of Play in Entertainment Products Bachelor of Arts Internship Organisation Supervisor: Natasha Barnes, CEO Academic Supervisor: Dr. Donald Matheson Project Reference Number projects with the University of Canterbury Bachelor of Arts Internship Program (please see other project

  5. PUBLIC HEARING EPA PROPOSED ALTERNATIVES TO THE COMPLIANCE CRITERIA

    E-Print Network [OSTI]

    ALTERNATIVES TO THE COMPLIANCE CRITERIA FOR THE WIPP TRANSCRIPT OF PROCEEDINGS SEPTEMBER 24, 2002 of the WIPP facility. And I would also like to introduce Keith Matthews. He's an attorney with EPA working with us on the WIPP project. Now let me briefly describe our reason for being here. In 1992 Congress

  6. Manufacturing time operators: Covariance, selection criteria, and examples

    SciTech Connect (OSTI)

    Hegerfeldt, G. C. [Institut fuer Theoretische Physik, Universitaet Goettingen, Friedrich-Hund-Platz 1, DE-37077 Goettingen (Germany); Muga, J. G.; Munoz, J. [Departamento de Quimica Fisica, Universidad del Pais Vasco, Apartado 644, ES-48080 Bilbao (Spain)

    2010-07-15

    We provide the most general forms of covariant and normalized time operators and their probability densities, with applications to quantum clocks, the time of arrival, and Lyapunov quantum operators. Examples are discussed of the profusion of possible operators and their physical meaning. Criteria to define unique, optimal operators for specific cases are given.

  7. Manufacturing time operators: covariance, selection criteria, and examples

    E-Print Network [OSTI]

    G. C. Hegerfeldt; J. G. Muga; J. Muñoz

    2010-05-27

    We provide the most general forms of covariant and normalized time operators and their probability densities, with applications to quantum clocks, the time of arrival, and Lyapunov quantum operators. Examples are discussed of the profusion of possible operators and their physical meaning. Criteria to define unique, optimal operators for specific cases are given.

  8. Waste acceptance criteria for the Waste Isolation Pilot Plant

    SciTech Connect (OSTI)

    NONE

    1996-04-01

    The Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria (WAC), DOE/WIPP-069, was initially developed by a U.S. Department of Energy (DOE) Steering Committee to provide performance requirements to ensure public health and safety as well as the safe handling of transuranic (TRU) waste at the WIPP. This revision updates the criteria and requirements of previous revisions and deletes those which were applicable only to the test phase. The criteria and requirements in this document must be met by participating DOE TRU Waste Generator/Storage Sites (Sites) prior to shipping contact-handled (CH) and remote-handled (RH) TRU waste forms to the WIPP. The WIPP Project will comply with applicable federal and state regulations and requirements, including those in Titles 10, 40, and 49 of the Code of Federal Regulations (CFR). The WAC, DOE/WIPP-069, serves as the primary directive for assuring the safe handling, transportation, and disposal of TRU wastes in the WIPP and for the certification of these wastes. The WAC identifies strict requirements that must be met by participating Sites before these TRU wastes may be shipped for disposal in the WIPP facility. These criteria and requirements will be reviewed and revised as appropriate, based on new technical or regulatory requirements. The WAC is a controlled document. Revised/changed pages will be supplied to all holders of controlled copies.

  9. Interim performance criteria for photovoltaic energy systems. [Glossary included

    SciTech Connect (OSTI)

    DeBlasio, R.; Forman, S.; Hogan, S.; Nuss, G.; Post, H.; Ross, R.; Schafft, H.

    1980-12-01

    This document is a response to the Photovoltaic Research, Development, and Demonstration Act of 1978 (P.L. 95-590) which required the generation of performance criteria for photovoltaic energy systems. Since the document is evolutionary and will be updated, the term interim is used. More than 50 experts in the photovoltaic field have contributed in the writing and review of the 179 performance criteria listed in this document. The performance criteria address characteristics of present-day photovoltaic systems that are of interest to manufacturers, government agencies, purchasers, and all others interested in various aspects of photovoltaic system performance and safety. The performance criteria apply to the system as a whole and to its possible subsystems: array, power conditioning, monitor and control, storage, cabling, and power distribution. They are further categorized according to the following performance attributes: electrical, thermal, mechanical/structural, safety, durability/reliability, installation/operation/maintenance, and building/site. Each criterion contains a statement of expected performance (nonprescriptive), a method of evaluation, and a commentary with further information or justification. Over 50 references for background information are also given. A glossary with definitions relevant to photovoltaic systems and a section on test methods are presented in the appendices. Twenty test methods are included to measure performance characteristics of the subsystem elements. These test methods and other parts of the document will be expanded or revised as future experience and needs dictate.

  10. Simultaneous approximation of multi-criteria submodular function ...

    E-Print Network [OSTI]

    Megiddo

    2012-03-31

    ... criteria (i.e., k ? 3), the following example, an extension of the above exam- ... f1(Si) +. ? i,j : 1?i

  11. Full-tensor alignment criteria for sheared nematic polymers

    E-Print Network [OSTI]

    Full-tensor alignment criteria for sheared nematic polymers M. Gregory Forest and Ruhai Zhou The shear problem for nematic polymers consists in characterizing all stable stationary ori- entational, further characterize nematic polymers in simple shear. Leslie-Ericksen (L-E) theory provides formulas

  12. Probabilistic transient analysis of fuel choices for sodium fast reactors

    E-Print Network [OSTI]

    Denman, Matthew R

    2011-01-01

    This thesis presents the implications of using a risk-informed licensing framework to inform the design of Sodium Fast Reactors. NUREG-1860, more commonly known as the Technology Neutral Framework (TNF), is a risk-informed ...

  13. Stigmergy in Comparative Settlement Choice and Palaeoenvironment Simulation

    E-Print Network [OSTI]

    Ch'ng, Eugene; Hakvoort, Gido

    2015-01-01

    Decisions on settlement location in the face of climate change and coastal inundation may have resulted in success, survival or even catastrophic failure for early settlers in many parts of the world. In this study we investigate various questions related to how individuals respond to a palaeoenvironmental simulation, on an interactive tabletop device where participants have the opportunity to build a settlement on a coastal landscape, balancing safety and access to resources, including sea and terrestrial foodstuffs, whilst taking into consideration the threat of rising sea levels. The results of the study were analysed to consider whether decisions on settlement were predicated to be near to locations where previous structures were located, stigmergically, and whether later settler choice would fare better, and score higher, as time progressed. The proximity of settlements was investigated and the reasons for clustering were considered. The interactive simulation was exhibited to thousands of visitors at th...

  14. Technology Validation

    Broader source: Energy.gov [DOE]

    To reduce solar technology risks, DOE and its partners evaluate the performance and reliability of novel photovoltaic (PV) hardware and systems through laboratory and field testing. The focus of...

  15. GEA Refrigeration Technologies / GEA Refrigeration Germany GmbH Wolfgang Dietrich / Dr. Ole Fredrich

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    Technologies3 Achema 2012 // heat pumps using ammonia Industrial demand on heat in Germany Heatdemandin Fredrich GEA Grasso heat pumps using ammonia ­ the megawatt range #12;GEA Refrigeration Technologies2 Achema 2012 // heat pumps using ammonia Heat pumps using ammonia ­ a sustainable choice How to improve

  16. Technology Roadmap Analysis 2013: Assessing Automotive Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology Roadmap Analysis 2013: Assessing Automotive Technology R&D Relevant to DOE Power Electronics Cost Targets Technology Roadmap Analysis 2013: Assessing Automotive...

  17. Innovative rehabilitation technologies: A state of the art overview

    SciTech Connect (OSTI)

    1996-02-01

    This report describes the results of a 1995 Housing Rehabilitation Technologies study, through which HUD sought information from the model code associations, trade and professional organizations, manufacturers, and others on new technologies and advances in existing ones. In deciding which technologies to include in the report, three criteria were applied: cost, time, and quality. Among the technologies discussed are reinforced hollow brick masonry, moisture barrier housewraps, ductless air conditioners, cast-in-place flue relining systems, wood flooring installation systems, and dust control methods. The report also notes that many design advances are occurring in the areas of compute software, seismic retrofit, hazardous materials abatement, accessibility, home automation, and energy-efficient labeling.

  18. Duct injection technology prototype development: Evaluation of engineering data

    SciTech Connect (OSTI)

    Not Available

    1990-07-01

    The objective of the Duct Injection Technology Prototype Development Project is to develop a sound design basis for applying duct injection technology as a post-combustion SO{sub 2}emissions control method to existing coal-fired power plants. The necessary engineering design and scale-up criteria will be developed for the commercialization of duct injection technology for the control of SO{sub 2} emissions from coal-fired boilers in the utility industry. The primary focus of the analyses summarized in this Topical Report is the review of the known technical and economic information associated with duct injection technology. (VC)

  19. Building Technologies Office Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Roland Risser Director, Building Technologies Office Building Technologies Office Energy Efficiency Starts Here. 2 Building Technologies Office Integrated Approach: Improving...

  20. SEWAGE LAGOON DESIGN USING WETLANDS AND OTHER UPGRADING TECHNOLOGIES

    E-Print Network [OSTI]

    that a total ammonia concentration of 5 mg/L-N be used as a design criteria. In additionto presenting design#12;L L llF L L L SEWAGE LAGOON DESIGN USING WETLANDS AND OTHER UPGRADING TECHNOLOGIES TO ACHIEVE effluents are typically non-toxic. Using an arbitrary factor of safety of two, it is recommended

  1. Specialty choice in times of economic crisis: a cross-sectional survey of Spanish medical students

    E-Print Network [OSTI]

    Harris, Jeffrey E.

    Objective: To investigate the determinants of specialty choice among graduating medical students in Spain, a country that entered into a severe, ongoing economic crisis in 2008.

  2. The Causal Relationship between the Built Environment and Personal Travel Choice: Evidence from Northern California

    E-Print Network [OSTI]

    Cao, XinYu

    2007-01-01

    accessed on August 4, 2005. Beggs, S. D. and Cardell, S.type choices (e.g. , Beggs and Cardell, 1980; Berkovec and

  3. The Influence of Elections on the Accounting Choices of Governmental Entities

    E-Print Network [OSTI]

    Kido, Nolan

    This paper investigates whether gubernatorial elections affect state governments’ accounting choices. We identify two accounts, the compensated absence liability account and the unfunded pension liability account, which ...

  4. New technologies for refrigeration without CFCs

    SciTech Connect (OSTI)

    Swift, G.W.

    1992-09-01

    Today the appliance industry and other cooling industries are facing the double challenge of eliminating environmentally harmful CFCs while simultaneously improving energy efficiency. These challenges will force this industry to make tremendous changes and to work out many difficult problems, ranging from choice of technology through production-line retooling to product-liability concerns. Three new cooling technologies--sonic compression, thermoacoustic refrigeration, and Malone refrigeration--have been developed at least in part at Los Alamos National Laboratory. We will discuss the principles, features, and status of each of these three technologies. With these three examples we hope to show that mechanical compression and subsequent evaporation of CFCs is not the only potentially practical way to produce cooling. These examples are only three of many alternative cooling technologies. No new technology can be guaranteed a success before development is complete, from either an economic or engineering point of view. But enough alternative cooling technologies exist, and the probability for success of each technology is high enough, that one or more of these technologies can almost certainly be produced at reasonable cost, eliminate CFCS, and reduce the consumption of electricity.

  5. Development of thermal performance criteria for residential passive solar buildings

    SciTech Connect (OSTI)

    Sabatiuk, P.A.; Cassel, D.E.; McCabe, M.; Scarbrough, C.

    1980-01-01

    In support of the development of thermal performance criteria for residential passive solar buildings, thermal design characteristics and anticipated performance for 266 projects in the HUD Passive Residential Design Competition and the HUD Cycle 5 Demonstration Program were analyzed. These passive residences are located in all regions of the United States requiring space heating, and they represent a variety of passive solar system types including direct gain, indirect gain, and solarium (isolated gain) systems. The results of this statistical analysis are being used to develop proposed minimum acceptable levels of thermal performance for passive solar buildings for the residential performance criteria. A number of performance measures were examined, including net solar contribution, solar fraction, and auxiliary energy use. These and other design and climate-related parameters were statistically correlated using the DATAPLOT computer program and standard statistical analysis techniques.

  6. Project design criteria manual: Upper Mechanicville Hydroelectric Redevelopment Project

    SciTech Connect (OSTI)

    None

    1980-12-01

    The design criteria presented in this manual are to be used as the bases for the detailed design for the Upper Mechanicville (NY) Hydroelectric Redevelopment Project. The manual refers to codes and standards which are to be used in the design of the project. Design approaches not covered by existing codes and standards are also given for all phases of the project. The manual is divided into six sections: civil design, hydraulic design, geotechnical design, electrical systems, mechanical systems, and major equipment. These design criteria are to be used as a guide for design. When changes become necessary, these shall be documented by the engineer responsible for the design. This documentation shall be sent to the Project Engineer and Project Manager for submission to the client for reference. The documentation shall specify the reason for the change and shall be routed to all Department Coordinators.

  7. Early Site Permit Demonstration Program: Regulatory criteria evaluation report

    SciTech Connect (OSTI)

    Not Available

    1993-03-01

    The primary objective of the ESPDP is to demonstrate successfully the use of 10CFR52 to obtain ESPs for one or more US sites for one (or more) ALWR nuclear power plants. It is anticipated that preparation of the ESP application and interaction with NRC during the application review process will result not only in an ESP for the applicant(s) but also in the development of criteria and definition of processes, setting the precedent that facilitates ESPs for subsequent ESP applications. Because siting regulatory processes and acceptance criteria are contained in over 100 separate documents, comprehensive licensing and technical reviews were performed to establish whether the requirements and documentation are self-consistent, whether the acceptance criteria are sufficiently well-defined and clear, and whether the licensing process leading to the issuance of an ESP is unambiguously specified. The results of the technical and licensing evaluations are presented in this report. The purpose, background, and organization of the ESPDP is delineated in Section 1. Section 11 contains flowcharts defining siting application requirements, environmental report requirements, and emergency planning/preparedness requirements for ALWRS. The licensing and technical review results are presented in Section III.

  8. A new approach to criteria for health risk assessment

    SciTech Connect (OSTI)

    Spickett, Jeffery; Katscherian, Dianne; Goh, Yang Miang

    2012-01-15

    Health Impact Assessment (HIA) is a developing component of the overall impact assessment process and as such needs access to procedures that can enable more consistent approaches to the stepwise process that is now generally accepted in both EIA and HIA. The guidelines developed during this project provide a structured process, based on risk assessment procedures which use consequences and likelihood, as a way of ranking risks to adverse health outcomes from activities subjected to HIA or HIA as part of EIA. The aim is to assess the potential for both acute and chronic health outcomes. The consequences component also identifies a series of consequences for the health care system, depicted as expressions of financial expenditure and the capacity of the health system. These more specific health risk assessment characteristics should provide for a broader consideration of health consequences and a more consistent estimation of the adverse health risks of a proposed development at both the scoping and risk assessment stages of the HIA process. - Highlights: Black-Right-Pointing-Pointer A more objective approach to health risk assessment is provided. Black-Right-Pointing-Pointer An objective set of criteria for the consequences for chronic and acute impacts. Black-Right-Pointing-Pointer An objective set of criteria for the consequences on the health care system. Black-Right-Pointing-Pointer An objective set of criteria for event frequency that could impact on health. Black-Right-Pointing-Pointer The approach presented is currently being trialled in Australia.

  9. IFE Chamber Technology Testing Program In NIF and Chamber Development Test Plan Mohamed A. Abdou

    E-Print Network [OSTI]

    Abdou, Mohamed

    chamber technology testing program in NIF involoving: criteria for evaluation to testing in ignition facility serves a critical role in chamber R&D test plans in order to reduce the risks for chamber technology testing in NIF might not be achievable because its integrated performance is evaluated

  10. PROJECT W-551 INTERIM PRETREATMENT SYSTEM TECHNOLOGY SELECTION SUMMARY DECISION REPORT AND RECOMMENDATION

    SciTech Connect (OSTI)

    CONRAD EA

    2008-08-12

    This report provides the conclusions of the tank farm interim pretreatment technology decision process. It documents the methodology, data, and results of the selection of cross-flow filtration and ion exchange technologies for implementation in project W-551, Interim Pretreatment System. This selection resulted from the evaluation of specific scope criteria using quantitative and qualitative analyses, group workshops, and technical expert personnel.

  11. Coal-fired power generation: Proven technologies and pollution control systems

    SciTech Connect (OSTI)

    Balat, M. [University of Mah, Trabzon (Turkey)

    2008-07-01

    During the last two decades, significant advances have been made in the reduction of emissions from coal-fired power generating plants. New technologies include better understanding of the fundamentals of the formation and destruction of criteria pollutants in combustion processes (low nitrogen oxides burners) and improved methods for separating criteria pollutants from stack gases (FGD technology), as well as efficiency improvements in power plants (clean coal technologies). Future demand for more environmentally benign electric power, however, will lead to even more stringent controls of pollutants (sulphur dioxide and nitrogen oxides) and greenhouse gases such as carbon dioxide.

  12. PowerChoice Residential Customer Response to TOU Rates

    SciTech Connect (OSTI)

    Peters, Jane S.; Moezzi, Mithra; Lutzenhiser, Susan; Woods, James; Dethman, Linda; Kunkle, Rick

    2009-10-01

    Research Into Action, Inc. and the Sacramento Municipal Utility District (SMUD) worked together to conduct research on the behaviors and energy use patterns of SMUD residential customers who voluntarily signed on to a Time-of-Use rate pilot launched under the PowerChoice label. The project was designed to consider the how and why of residential customers ability and willingness to engage in demand reduction behaviors, and to link social and behavioral factors to observed changes in demand. The research drew on a combination of load interval data and three successive surveys of participating households. Two experimental treatments were applied to test the effects of increased information on households ability to respond to the Time-of-Use rates. Survey results indicated that participants understood the purpose of the Time-of-Use rate and undertook substantial appropriate actions to shift load and conserve. Statistical tests revealed minor initial price effects and more marked, but still modest, adjustments to seasonal rate changes. Tests of the two information interventions indicated that neither made much difference to consumption patterns. Despite the lackluster statistical evidence for load shifting, the analysis points to key issues for critical analysis and development of residential Time-of-Use rates, especially pertinent as California sets the stage for demand response in more California residences.

  13. Commissioning to Meet Space Qualification Criteria vs. Energy Consumption Optimization Focused Commissioning 

    E-Print Network [OSTI]

    Sellers, D.; Irvine, L.

    2001-01-01

    In many cases, the commissioning process is driven by space quality criteria rather than by energy consumption and optimization criteria. This is especially true for the HVAC systems serving clean rooms in the semi-conductor and pharmaceuticals...

  14. Summary of New DOE-STD-1020-2011 NPH Analysis and Design Criteria...

    Energy Savers [EERE]

    Summary of New DOE-STD-1020-2011 NPH Analysis and Design Criteria for DOE Facilities (Proposed) Summary of New DOE-STD-1020-2011 NPH Analysis and Design Criteria for DOE Facilities...

  15. Site selection criteria in community shopping centers : implications for real estate developers

    E-Print Network [OSTI]

    Brubaker, Benjamin T., 1975-

    2004-01-01

    The purpose of this paper is to investigate retail site selection criteria in community centers and ascertain the implications of these criteria for the retail real estate developer. Historically, real estate developers ...

  16. Wind load comparison for the ASCE standard 7 and the Hanford site design criteria

    SciTech Connect (OSTI)

    Giller, R.A., Westinghouse Hanford

    1996-07-16

    This document provides calculations and discussions to compare Hanford Site wind load criteria with the current national standard for wind loads (ASCE 7, 1995). Site criteria uses the 1988 edition ASCE 7.

  17. Criteria Combinations in the Personality Disorders: Challenges Associated with a Polythetic Diagnostic System 

    E-Print Network [OSTI]

    Cooper, Luke D.

    2011-08-08

    Converging research on the diagnostic criteria for personality disorders (PDs) reveals that most criteria have different psychometric properties. This finding is inconsistent with the DSM-IV-TR PD diagnostic system, which weights each criterion...

  18. Engineering &Technology

    E-Print Network [OSTI]

    Southampton, University of

    Software Technologies Deloitte Dialog Semiconductor ECM Selection EDT-Year in Industry EMC Corporation to join our organisation and be based in our Ferndown, Dorset, location within our product electronics have application, design and manufacturing facilities in Canada, America, Europe and China. We

  19. Manufacturing technologies

    SciTech Connect (OSTI)

    1995-09-01

    The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

  20. Pyroprocessing Technologies

    E-Print Network [OSTI]

    Kemner, Ken

    of pyrochemical processes for the recycle of oxide, carbide and other advanced fuels and laid the foundationPyroprocessing Technologies RECYCLING USED NUCLEAR FUEL FOR A SUSTAINABLE ENERGY FUTURE #12;32 Storing Used Nuclear Fuel is a Real Waste Nuclear power is the most environmentally friendly way

  1. Building Technologies Office Overview

    SciTech Connect (OSTI)

    2013-04-01

    Building Technologies Office Overview Presentation for the 2013 Building Technologies Office's Program Peer Review

  2. Vacuum Technology

    SciTech Connect (OSTI)

    Biltoft, P J

    2004-10-15

    The environmental condition called vacuum is created any time the pressure of a gas is reduced compared to atmospheric pressure. On earth we typically create a vacuum by connecting a pump capable of moving gas to a relatively leak free vessel. Through operation of the gas pump the number of gas molecules per unit volume is decreased within the vessel. As soon as one creates a vacuum natural forces (in this case entropy) work to restore equilibrium pressure; the practical effect of this is that gas molecules attempt to enter the evacuated space by any means possible. It is useful to think of vacuum in terms of a gas at a pressure below atmospheric pressure. In even the best vacuum vessels ever created there are approximately 3,500,000 molecules of gas per cubic meter of volume remaining inside the vessel. The lowest pressure environment known is in interstellar space where there are approximately four molecules of gas per cubic meter. Researchers are currently developing vacuum technology components (pumps, gauges, valves, etc.) using micro electro mechanical systems (MEMS) technology. Miniature vacuum components and systems will open the possibility for significant savings in energy cost and will open the doors to advances in electronics, manufacturing and semiconductor fabrication. In conclusion, an understanding of the basic principles of vacuum technology as presented in this summary is essential for the successful execution of all projects that involve vacuum technology. Using the principles described above, a practitioner of vacuum technology can design a vacuum system that will achieve the project requirements.

  3. Science &Technology Facilities Council

    E-Print Network [OSTI]

    Science &Technology Facilities Council Science &Technology Facilities Council Science and Technology Facilities Council Annual Report and Accounts 2011-2012 Science and Technology Facilities Council Laboratory, Cheshire; UK Astronomy Technology Centre, Edinburgh; Chilbolton Observatory, Hampshire; Isaac

  4. SELECTING INFORMATION TECHNOLOGY SECURITY

    E-Print Network [OSTI]

    April 2004 SELECTING INFORMATION TECHNOLOGY SECURITY PRODUCTS Shirley Radack, Editor Computer Security Division Information Technology Laboratory National Institute of Standards and Technology Information technology security prod ucts are essential to better secure infor mation technology (IT) systems

  5. Crowdsourcing Control: Moving Beyond Multiple Choice Christopher H. Lin Mausam Daniel S. Weld

    E-Print Network [OSTI]

    Mausam

    Crowdsourcing Control: Moving Beyond Multiple Choice Christopher H. Lin Mausam Daniel S. Weld Department of Computer Science and Engineering University of Washington Seattle, WA 98195 {chrislin,mausam,weld, and Weld 2010; 2011) to quality control is the restriction to multiple choice questions, i.e., jobs where

  6. Risk Analysis, Vol. , No. , DOI: Mean-Deviation Analysis in The Theory of Choice

    E-Print Network [OSTI]

    Banaji,. Murad

    Risk Analysis, Vol. , No. , DOI: Mean-Deviation Analysis in The Theory of Choice Bogdan Grechuk: mean-deviation analysis, theory of choice, deviation measures, coherent risk measures 1. INTRODUCTION for Risk Analysis #12;2 B. Grechuk, A. Molyboha, M. Zabarankin r.v. PC such that PC > PB with probability 1

  7. EMPIRICAL ARTICLE Restrictive Food Intake as a Choice--A Paradigm for

    E-Print Network [OSTI]

    Ochsner, Kevin

    of Anorexia Nervosa (AN). The neurocognitive mechanisms underlying pathological food choice have not been to maladaptive food choices characteristic of AN. VC 2014 Wiley Periodi- cals, Inc. Keywords: anorexia nervosa:59­66) Introduction Anorexia nervosa (AN) is a severe disorder with a mortality rate among the highest of any

  8. VALUING PUBLIC PREFERENCES FOR OFFSHORE WIND POWER: A CHOICE EXPERIMENT APPROACH

    E-Print Network [OSTI]

    Firestone, Jeremy

    VALUING PUBLIC PREFERENCES FOR OFFSHORE WIND POWER: A CHOICE EXPERIMENT APPROACH by Andrew D. Krueger All Rights Reserved #12;ii VALUING PUBLIC PREFERENCES FOR OFFSHORE WIND POWER: A CHOICE EXPERIMENT thank you for your perspective on offshore renewable energy regulation. As committee members, your

  9. BEHAVIORAL ECOLOGY -ORIGINAL PAPER Lemming winter habitat choice: a snow-fencing experiment

    E-Print Network [OSTI]

    Krebs, Charles J.

    to enhance winter reproduction and sur- vival by arctic lemmings (Lemmus and Dicrostonyx spp). This leads a component of this hypothesis, that snow depth influences habitat choice, at three Canadian Arctic sites is a primary determinant of winter habitat choice by tundra lemmings and voles. Keywords Arctic ecology Á

  10. Considering latent attitudes in mode choice: The case of Switzerland Hurtubia, Atasoy, Glerum, Curchod and Bierlaire

    E-Print Network [OSTI]

    Bierlaire, Michel

    Considering latent attitudes in mode choice: The case of Switzerland Hurtubia, Atasoy, Glerum, Curchod and Bierlaire Considering latent attitudes in mode choice: The case of Switzerland Ricardo, Switzerland, ricardo.hurtubia@epfl.ch Bilge Atasoy, Transport and Mobility Laboratory, Ecole Polytechnique F

  11. Location Choice vis--vis Transportation: The Case of Apartment Dwellers Michelle Bina

    E-Print Network [OSTI]

    Kockelman, Kara M.

    of residential location choice is fundamental to behavioral models of land use and, ultimately, travel demand and explores their reasons for moving, priorities when choosing a residential location, and tradeoffs involved of future travel patterns. Residential location choice models can inform such models. This paper focuses

  12. Cattle grazing behavior with season-long free-choice access to four forage types

    E-Print Network [OSTI]

    Fehmi, Jeffrey S.

    Cattle grazing behavior with season-long free-choice access to four forage types Jeffrey S. Fehmi Abstract This experiment investigated how season-long, free-choice grazing affected weekly cattle grazing pastures was uneven and negatively correlated with salt and water sites. Cattle can rotate themselves among

  13. On the method of optimal portfolio choice by cost-efficiency

    E-Print Network [OSTI]

    Rüschendorf, Ludger

    On the method of optimal portfolio choice by cost-efficiency Ludger R¨uschendorf*, Viktor Wolf Freiburg, Germany Abstract We develop the method of optimal portfolio choice based on the concept of cost-efficiency class of cost-efficient payoffs. While the results for the cost-efficient payoff given so far

  14. Spoilt for Choice? The Costs and Benefits of Opening UK Residential Energy Markets

    E-Print Network [OSTI]

    Feigon, Brooke

    sectors to new entrants. This paper focuses on opening retail markets, when supplier choice was extendedSpoilt for Choice? The Costs and Benefits of Opening UK Residential Energy Markets by Catherine constraints on prices in these markets, even though incumbents continue to supply more than 60% of consumers

  15. CSEM WP 123 Spoilt for Choice? The Costs and Benefits of

    E-Print Network [OSTI]

    Feigon, Brooke

    on opening retail markets, when supplier choice was extended to residential consumers (it had already beenCSEM WP 123 Spoilt for Choice? The Costs and Benefits of Opening UK Residential Energy Markets Anglia, UK, and UCEI February 2004 This paper is part of the Center for the Study of Energy Markets (CSEM

  16. Analyzing Social Network Structures in the Iterated Prisoner's Dilemma with Choice and Refusal

    E-Print Network [OSTI]

    Tesfatsion, Leigh

    Analyzing Social Network Structures in the Iterated Prisoner's Dilemma with Choice and Refusal Mark of Computer Sciences Technical Report CS-TR-94-1259 Abstract The Iterated Prisoner's Dilemma with Choice and Refusal (IPD/CR) 44] is an ex- tension of the Iterated Prisoner's Dilemma with evolution that allows

  17. Optimal Choice for Number of Strands in a Litz-Wire Transformer Winding

    E-Print Network [OSTI]

    Optimal Choice for Number of Strands in a Litz-Wire Transformer Winding C. R. Sullivan Found Choice for Number of Strands in a Litz-Wire Transformer Winding Charles R. Sullivan Thayer School/inductor Abstract -- The number of strands to minimize loss in a litz-wire transformer winding is determined

  18. What Drives the Choice of a Third Party Logistics Provider? Edward Anderson , Tim Coltman*

    E-Print Network [OSTI]

    Coltman, Tim

    1 What Drives the Choice of a Third Party Logistics Provider? Edward Anderson , Tim Coltman and the direction of the research project. #12;2 What Drives the Choice of a Third Party Logistics Provider of their distinctive value propositions ­ a fact one would also expect holds true when companies choose a logistics

  19. Choice of reconstructed tissue properties affects interpretation of lung EIT images

    E-Print Network [OSTI]

    Adler, Andy

    Choice of reconstructed tissue properties affects interpretation of lung EIT images Bartlomiej patients. In lung EIT, the EIT inverse problem is commonly linearised and only changes in electrical properties of the lung and artefacts introduced by the linearisation. #12;Choice of reconstructed tissue

  20. Destination Choice Model including panel data using WiFi localization in a pedestrian facility

    E-Print Network [OSTI]

    Bierlaire, Michel

    Destination Choice Model including panel data using WiFi localization in a pedestrian facility Loïc data using WiFi localization in a pedestrian facility April 2015 EPFL Destination Choice Model including panel data using WiFi localization in a pedestrian facility Loïc Tinguely, Antonin Danalet

  1. A DISCRETE CHOICE PEDESTRIAN BEHAVIOR MODEL FOR PEDESTRIAN DETECTION IN VISUAL TRACKING SYSTEMS

    E-Print Network [OSTI]

    Bierlaire, Michel

    A DISCRETE CHOICE PEDESTRIAN BEHAVIOR MODEL FOR PEDESTRIAN DETECTION IN VISUAL TRACKING SYSTEMS-based models. In this paper we propose the use of a discrete choice model (DCM) of pedestrian behavior and its application to the problem of the target detection in the particular case of pedestrian tracking. We analyze

  2. Making Sustainable Energy Choices: Insights on the Energy/Water/Land Nexus

    SciTech Connect (OSTI)

    Not Available

    2014-10-01

    This periodic publication summarizes insights from the body of NREL analysis work. In this issue of Analysis Insights, we examine the implications of our energy choices on water, land use, climate, developmental goals, and other factors. Collectively, NREL's work helps policymakers and investors understand and evaluate energy choices within the complex web of connections, or nexus, between energy, water, and land.

  3. Optimal Supplier Choice with Discounting B. Goldengorin, J. Keane, V. Kuzmenko & M. K-S. Tso

    E-Print Network [OSTI]

    Sidorov, Nikita

    Optimal Supplier Choice with Discounting B. Goldengorin, J. Keane, V. Kuzmenko & M. K-S. Tso First of Mathematics, The University of Manchester #12;Optimal supplier choice with discounting B Goldengorin, J. Keane suppliers operate discount schedules based on total business value. We formulate the buyers's decision

  4. USING WEIGHTED SUM METHOD FOR THE CHOICE OF THE NIGHT VISION GOGGLES BATTERY POWER SUPPLY

    E-Print Network [OSTI]

    Borissova, Daniela

    USING WEIGHTED SUM METHOD FOR THE CHOICE OF THE NIGHT VISION GOGGLES BATTERY POWER SUPPLY Daniela into account device working range, weight and price and also electrical battery power supply lifetime, temperature working range and its mechanics. The multicriteria optimization choice of the electrical battery

  5. Photovoltaic (PV)energy conversion is a rapidly growing technology for converting solar energy into electricity. The current production is over 20

    E-Print Network [OSTI]

    Tsymbal, Evgeny Y.

    Photovoltaic (PV)energy conversion is a rapidly growing technology for converting solar energy polymers, is making rapid strides towards becoming the low cost material of choice for PV energy conversion

  6. Satis cing Evaluation Functions: The Heart of the New Design-to-Criteria Paradigm

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Satis cing Evaluation Functions: The Heart of the New Design-to-Criteria Paradigm Thomas Wagner@cs.umass.edu UMass Computer Science Technical Report 1996-82 November 16, 1996 Abstract Design-to-Criteria scheduling of the Design-to-Criteria paradigm is the ability to determine how well a particular schedule, or schedule

  7. Contingency Analysis in the Design-to-Criteria Computer Science Department

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Contingency Analysis in the Design-to-Criteria Scheduler Anita Raja Computer Science Department University of Massachusetts October 9, 1998 Abstract The Design-to-Criteria scheduler is a domain independent also implement method reordering techniques to minimize uncertainty. 1 Introduction The Design-to-Criteria

  8. Satisficing Evaluation Functions: The Heart of the New DesigntoCriteria Paradigm \\Lambda

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Satisficing Evaluation Functions: The Heart of the New Design­to­Criteria Paradigm \\Lambda Thomas@cs.umass.edu UMass Computer Science Technical Report 1996­82 November 16, 1996 Abstract Design­to­Criteria scheduling of the Design­to­Criteria paradigm is the ability to determine how well a particular schedule, or schedule

  9. Multi-Criteria Optimization -an Important Foundation of Fuzzy System Design

    E-Print Network [OSTI]

    Kreinovich, Vladik

    Multi-Criteria Optimization - an Important Foundation of Fuzzy System Design Hung T. Nguyen1. Multi-criteria optimization, fuzzy system design, fuzzy sets, fuzzy logic. 1 Introduction In some real : X R, and · a (crisp) set C X (of all designs that satisfy certain a priori criteria) TO FIND x X

  10. On Reverse-Engineering S-Boxes with Hidden Design Criteria or Structure

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    On Reverse-Engineering S-Boxes with Hidden Design Criteria or Structure Alex Biryukov and Léo of F are far from random and propose a design criteria, along with an algorithm which generates S into the visual representation of S-box's DDT. Keywords: S-box design criteria, Skipjack, linearity, functional

  11. FIRE Structural Design Criteria 4/13/01 Revision 0 Page No. i

    E-Print Network [OSTI]

    FIRE Structural Design Criteria 4/13/01 Revision 0 Page No. i FIRE_DesCrit_IZ_041301.doc FIREFIRE (FUSION IGNITION RESEARCH EXPERIMENT) STRUCTURAL DESIGN CRITERIA Rev. 0 4/13/01 I. ZATZ, EDITOR ___________________________ R. Thome #12;FIRE Structural Design Criteria 2/24/99 Revision 0 Page No. 1 INTRODUCTION

  12. Modeling Uncertainty and its Implications to Design-to-Criteria Thomas A. Wagner Anita Raja

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    Modeling Uncertainty and its Implications to Design-to-Criteria Scheduling Thomas A. Wagner Anita to be made in real-time making the off-line policy computation- ally infeasible in open environments. Design-to-Criteria and subtasks. Recent advances in Design-to-Criteria include the addition of uncer- tainty to the TÆMS

  13. Fusion Engineering and Design 42 (1998) 555561 Scaling criteria for IFE liquid wall protection scheme simulation

    E-Print Network [OSTI]

    Abdou, Mohamed

    1998-01-01

    Fusion Engineering and Design 42 (1998) 555­561 Scaling criteria for IFE liquid wall protection-size system depends on the scaling criteria on which the test article/fluid medium is used. This paper- mental results to a full-size system depends on the scaling criteria on which the test article

  14. Automated Transportation Management System (ATMS) V2.0 logistics module PBI acceptance criteria

    SciTech Connect (OSTI)

    Weidert, R.S.

    1995-02-28

    This document defines the acceptance criteria for the Automated Transportation Management System V2.0 Logistics Module Performance Based Incentive (PBI). This acceptance criteria will be the primary basis for the generation of acceptance test procedures. The purpose of this document is to define the minimum criteria that must be fulfilled to guarantee acceptance of the Logistics Module.

  15. CRITERIA FOR LABELLING PROSODIC ASPECTS OF ENGLISH SPEECH Paul C. Bagshaw Briony J. Williams

    E-Print Network [OSTI]

    Edinburgh, University of

    ­unit [4]. This definition of nuclear syllables and the criteria used to determine sylCRITERIA FOR LABELLING PROSODIC ASPECTS OF ENGLISH SPEECH Paul C. Bagshaw Briony J. Williams Centre ABSTRACT We report a set of labelling criteria which have been developed to label prosodic events in clear

  16. Is Carbon a Realistic Choice for ITER's Divertor?

    SciTech Connect (OSTI)

    C.H. Skinner; G. Federici

    2005-05-13

    Tritium retention by co-deposition with carbon on the divertor target plate is predicted to limit ITER's DT burning plasma operations (e.g. to about 100 pulses for the worst conditions) before the in-vessel tritium inventory limit, currently set at 350 g, is reached. At this point, ITER will only be able to continue its burning plasma program if technology is available that is capable of rapidly removing large quantities of tritium from the vessel with over 90% efficiency. The removal rate required is four orders of magnitude faster than that demonstrated in current tokamaks. Eighteen years after the observation of co-deposition on JET and TFTR, such technology is nowhere in sight. The inexorable conclusion is that either a major initiative in tritium removal should be funded or that research priorities for ITER should focus on metal alternatives.

  17. Materials challenges in advanced coal conversion technologies

    SciTech Connect (OSTI)

    Powem, C.A.; Morreale, B.D. [National Energy Technology Laboratory, Albany, OR (United States)

    2008-04-15

    Coal is a critical component in the international energy portfolio, used extensively for electricity generation. Coal is also readily converted to liquid fuels and/or hydrogen for the transportation industry. However, energy extracted from coal comes at a large environmental price: coal combustion can produce large quantities of ash and CO{sub 2}, as well as other pollutants. Advanced technologies can increase the efficiencies and decrease the emissions associated with burning coal and provide an opportunity for CO{sub 2} capture and sequestration. However, these advanced technologies increase the severity of plant operating conditions and thus require improved materials that can stand up to the harsh operating environments. The materials challenges offered by advanced coal conversion technologies must be solved in order to make burning coal an economically and environmentally sound choice for producing energy.

  18. Portal Technology

    E-Print Network [OSTI]

    Warner, Beth Forrest

    2002-03-27

    Portal Technology Beth Forrest Warner Director, KU Digital Library Initiatives bwarner@ku.edu PUAD 839 March 27, 2002 Defining the issue… Today’s government agencies at all levels should note that the citizens they serve are “little concerned... their citizens’ perspectives. Instead of launching online services on a department-by-department basis, they are aggregating services across departments, accessible through a common portal.” (Janet Caldow, “The Quest for Electronic Government: A Defining...

  19. Emerging technologies

    SciTech Connect (OSTI)

    Lu, Shin-yee

    1993-03-01

    The mission of the Emerging Technologies thrust area at Lawrence Livermore National Laboratory is to help individuals establish technology areas that have national and commercial impact, and are outside the scope of the existing thrust areas. We continue to encourage innovative ideas that bring quality results to existing programs. We also take as our mission the encouragement of investment in new technology areas that are important to the economic competitiveness of this nation. In fiscal year 1992, we have focused on nine projects, summarized in this report: (1) Tire, Accident, Handling, and Roadway Safety; (2) EXTRANSYT: An Expert System for Advanced Traffic Management; (3) Odin: A High-Power, Underwater, Acoustic Transmitter for Surveillance Applications; (4) Passive Seismic Reservoir Monitoring: Signal Processing Innovations; (5) Paste Extrudable Explosive Aft Charge for Multi-Stage Munitions; (6) A Continuum Model for Reinforced Concrete at High Pressures and Strain Rates: Interim Report; (7) Benchmarking of the Criticality Evaluation Code COG; (8) Fast Algorithm for Large-Scale Consensus DNA Sequence Assembly; and (9) Using Electrical Heating to Enhance the Extraction of Volatile Organic Compounds from Soil.

  20. Technology disrupted

    SciTech Connect (OSTI)

    Papatheodorou, Y.

    2007-02-15

    Three years ago, the author presented a report on power generation technologies which in summary said 'no technology available today has the potential of becoming transformational or disruptive in the next five to ten years'. In 2006 the company completed another strategic view research report covering the electric power, oil, gas and unconventional energy industries and manufacturing industry. This article summarises the strategic view findings and then revisits some of the scenarios presented in 2003. The cost per megawatt-hour of the alternatives is given for plants ordered in 2005 and then in 2025. The issue of greenhouse gas regulation is dealt with through carbon sequestration and carbon allowances or an equivalent carbon tax. Results reveal substantial variability through nuclear power, hydro, wind, geothermal and biomass remain competitive through every scenario. Greenhouse gas scenario analysis shows coal still be viable, albeit less competitive against nuclear and renewable technologies. A carbon tax or allowance at $24 per metric ton has the same effect on IGCC cost as a sequestration mandate. However, the latter would hurt gas plants much more than a tax or allowance. Sequestering CO{sub 2} from a gas plant is almost as costly per megawatt-hour as for coal. 5 refs., 5 figs., 5 tabs.

  1. Venus Technology Plan Venus Technology Plan

    E-Print Network [OSTI]

    Rathbun, Julie A.

    Venus Technology Plan May 2014 #12; ii Venus Technology Plan At the Venus Exploration Survey priorities, and (3) develop a Technology Plan for future Venus missions (after a Technology Forum at VEXAG Meeting 11 in November 2013). Here, we present the 2014 Venus Technology Plan

  2. Criteria and Indicators for Sustainable Woodfuels | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePower VenturesInformation EU-UNDP ClimatePublic SchoolsCrestedCriteria and

  3. Perform multi-criteria impact analysis | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII JumpQuarterly Smart GridNorthInformation 8thPerform multi-criteria impact

  4. Idaho Operations Office: Technology summary, June 1994

    SciTech Connect (OSTI)

    Not Available

    1994-06-01

    This document has been prepared by the Department of Energy`s (DOE) Environmental Management (EM) Office of Technology Development (OTD) in order to highlight research, development, demonstration, testing, and evaluation (RDDT&E) activities funded through the Idaho Operations Office. Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. OTD programs are designed to make new, innovative, and more cost-effective technologies available for transfer to DOE environmental restoration and waste management end-users. Projects are demonstrated, tested, and evaluated to produce solutions to current problems. Transition of technologies into more advanced stages of development is based upon technological, regulatory, economic, and institutional criteria. New technologies are made available for use in eliminating radioactive, hazardous, and other wastes in compliance with regulatory mandates. The primary goal is to protect human health and prevent further contamination. OTD`s technology development programs address three major problem areas: (1) groundwater and soils cleanup; (2) waste retrieval and processing; and (3) pollution prevention. These problems are not unique to DOE, but are associated with other Federal agency and industry sites as well. Thus, technical solutions developed within OTD programs will benefit DOE, and should have direct applications in outside markets.

  5. Technology diffusion of energy-related products in residential markets

    SciTech Connect (OSTI)

    Davis, L.J.; Bruneau, C.L.

    1987-05-01

    Acceptance of energy-related technologies by end residential consumers, manufacturers of energy-related products, and other influential intermediate markets such as builders will influence the potential for market penetration of innovative energy-related technologies developed by the Department of Energy, Office of Building and Community Systems (OBCS). In this report, Pacific Northwest Laboratory reviewed the available information on technology adoption, diffusion, and decision-making processes to provide OBCS with a background and understanding of the type of research that has previously been conducted on this topic. Insight was gained as to the potential decision-making criteria and motivating factors that influence the decision-maker(s) selection of new technologies, and some of the barriers to technology adoption faced by potential markets for OBCS technologies.

  6. Assessment of a satellite power system and six alternative technologies

    SciTech Connect (OSTI)

    Wolsko, T.; Whitfield, R.; Samsa, M.; Habegger, L.S.; Levine, E.; Tanzman, E.

    1981-04-01

    The satellite power system is assessed in comparison to six alternative technologies. The alternatives are: central-station terrestrial photovoltaic systems, conventional coal-fired power plants, coal-gasification/combined-cycle power plants, light water reactor power plants, liquid-metal fast-breeder reactors, and fusion. The comparison is made regarding issues of cost and performance, health and safety, environmental effects, resources, socio-economic factors, and insitutional issues. The criteria for selecting the issues and the alternative technologies are given, and the methodology of the comparison is discussed. Brief descriptions of each of the technologies considered are included. (LEW)

  7. Lighting Choices to Save You Money | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDid you notHeat PumpsTechnologies |LibraryCenterCenter (LMI-EFRC)Lighting

  8. Technology and the Box

    E-Print Network [OSTI]

    Maitland, Padma

    2013-01-01

    its explorations of technology in partnership with radicalPadma Maitland Technology and the Box The room is thedisciplines. The theme of “Technology and the Box” emerged

  9. Information Technology and Libraries

    E-Print Network [OSTI]

    Hubble, Ann; Murphy, Deborah A.; Perry, Susan Chesley

    2011-01-01

    Sue Chesley Perry 196 INFORMATION TECHNOLOGY AND LIBRARIES |LITA - Library & Information Technology Association). ”Two of the 190 INFORMATION TECHNOLOGY AND LIBRARIES |

  10. Nuclear Science & Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Science & Technology Nuclear Science & Technology1354608000000Nuclear Science & TechnologySome of these resources are LANL-only and will require Remote Access. No...

  11. Standard guide for design criteria for plutonium gloveboxes

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This guide defines criteria for the design of glovebox systems to be used for the handling of plutonium in any chemical or physical form or isotopic composition or when mixed with other elements or compounds. Not included in the criteria are systems auxiliary to the glovebox systems such as utilities, ventilation, alarm, and waste disposal. Also not addressed are hot cells or open-face hoods. The scope of this guide excludes specific license requirements relating to provisions for criticality prevention, hazards control, safeguards, packaging, and material handling. Observance of this guide does not relieve the user of the obligation to conform to all federal, state, and local regulations for design and construction of glovebox systems. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user...

  12. Available Technologies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O DBiomass andAtomsVehicles and Fuels VehiclesTechnologies

  13. Distributed Energy Technology Characterization (Desiccant Technologies...

    Office of Environmental Management (EM)

    technologies can be designed to utilize the available thermal energy from a combined heat and power (CHP) system. This technology characterization is intended to provide...

  14. Vehicle Technologies Office: 2014 Electric Drive Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    automotive technologies under development. Research is focused on developing power electronics (PE), electric motor, and traction drive system (TDS) technologies that will reduce...

  15. NATIONAL ENERGY TECHNOLOGY LABORATORY Technology Transfer Basic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in Technology Transfer" award from the Federal Laboratory Consortium. Application of this technology reduces the costs and energy associated with more conventional scrubbing...

  16. Technology Support Bob Davis

    E-Print Network [OSTI]

    Technology Support Services · Bob Davis · Associate Director User Support Services 1 #12;Technology Support Services · NUIT Technology Support Services (TSS) helps Northwestern faculty, staff, and students Technologies · Brian Nielsen · Project Manager Faculty Initiatives 8 #12;Support for Teaching & Learning

  17. NREL: Technology Deployment - Technology Acceleration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines lightGeospatial ToolkitSMARTS -Being Replicated AcrossSolarTechnology

  18. Technological Changes and Transportation Development

    E-Print Network [OSTI]

    Garrison, William L.

    2001-01-01

    Consumption Production Segmentation Choices F~gure 1. Aand market and production segmentation and the diffusion of

  19. Environmental, Economic, and Social Impacts of Concrete Pavement Material Choices: A Life-Cycle Assessment Approach 

    E-Print Network [OSTI]

    Park, Hyunsoung

    2014-12-12

    Transportation Agencies (STAs) in rendering better-informed decisions for the concrete pavement material choices, the major research objective is to analyze the environmental, economic, and social impacts of the four concrete pavement alternatives from...

  20. Content Analysis of Reasons for Song Choices Among Individuals Receiving Hospice Care

    E-Print Network [OSTI]

    Parker, Laurie

    2014-05-31

    The purpose of this study was to describe the reasons for song choices of patients and their loved ones in a hospice setting. In all, 21 patients and caregivers participated in semi-structured interviews that were embedded ...

  1. Source choice in agricultural news coverage: impacts of reporter specialization and newspaper location, ownership, and circulation 

    E-Print Network [OSTI]

    White, Judith McIntosh

    2009-05-15

    This study examined coverage of the December 2003 bovine spongiform encephalopathy event to discover reporters’ sources for breaking agricultural news, the impact of reporter specialization on source choices, and the impact ...

  2. Investment Timing and Capacity Choice for Small-Scale Wind Power Under Uncertainty

    E-Print Network [OSTI]

    Fleten, Stein-Erik; Maribu, Karl Magnus

    2004-01-01

    REFERENCES [1] American Wind Power Association (AWEA), Road-CHOICE FOR SMALL-SCALE WIND POWER UNDER UNCERTAINTY Stein-Power production from wind power has stochastic inflows, and

  3. Hindi-english, Code Switching and Language Choice in Urban, Uppermiddle-class Indian Families

    E-Print Network [OSTI]

    Malhotra, Sunita

    1980-01-01

    Most bilingual speakers tend to 'code switch' between the languages they speak. The present study deals with code-switching and language choice and the speech of Hindi-English bilinguals residing in North India and the ...

  4. Paying Too Much for Energy? The True Costs of Our Energy Choices

    E-Print Network [OSTI]

    Looney, Adam

    Energy consumption is critical to economic growth and quality of life. America's energy system, however, is malfunctioning. The status quo is characterized by a tilted playing field, where energy choices are based on the ...

  5. Top of Mind in Task-Based Environments and Choice Under Risk

    E-Print Network [OSTI]

    Zaidi, Farhan

    2010-01-01

    biases that influence what is top of mind for consumers inZinman. “Getting to the Top of Mind: How Reminders IncreaseTop of Mind in Task-Based Environments and Choice Under Risk

  6. Hysteresis and urban rail : the effects of past urban rail on current residential and travel choices

    E-Print Network [OSTI]

    Block-Schachter, David

    2012-01-01

    Cities are endowed with and accumulate assets based on their unique histories, which in turn define the choice set of the present. These assets range from the natural-sheltered ports, fertile land--to the constructed--concrete ...

  7. Investment Timing and Capacity Choice for Small-Scale Wind Power Under Uncertainty

    E-Print Network [OSTI]

    Fleten, Stein-Erik; Maribu, Karl Magnus

    2004-01-01

    A 20-year industry plan for small wind turbine tech- nology,has estimated that small wind turbines could contribute to 3CAPACITY CHOICE FOR SMALL-SCALE WIND POWER UNDER UNCERTAINTY

  8. Food choices for hungry broiler breeders: do they prefer quantitative or qualitative dietary restriction? 

    E-Print Network [OSTI]

    Buckley, Louise Anne

    2012-06-30

    This programme of research uses choice test methodologies to quantify hungry broiler breeder chickens’ preferences for qualitative or quantitative dietary restriction. It begins with an outline of quantitative dietary ...

  9. On the Tradeoff between Economic Efficiency and Strategyproofness in Randomized Social Choice

    E-Print Network [OSTI]

    Cengarle, María Victoria

    schemes 1. INTRODUCTION Two fundamental notions in microeconomic theory are efficiency--no agent can-valued social choice functions that satisfy non-imposition--a weakening of efficiency--and strategyproofness

  10. Impact of modern logistics on industrial location choice and property markets

    E-Print Network [OSTI]

    Li, Yu, 1976-

    2007-01-01

    The debate on the impact of modern logistics on industrial location choice and property markets focuses on (1) whether modern inventory control and supply- chain configuration consolidate manufacturing and distribution ...

  11. Three essays on the economic theory of mating and parental choice 

    E-Print Network [OSTI]

    Antrup, Andreas Hermann

    2012-06-26

    Chapter 1: Relative Concerns and the Choice of Fertility Empirical research has shown that people exhibit relative concerns, they value social status. If they value their children's status as well, what effect will that ...

  12. On Choice of Subject and Replicates in Estimating Among and Within Subject Variation

    E-Print Network [OSTI]

    Weng-Kee Wong; Peter A. Lachenbruch; Philip J. Clements

    2011-01-01

    777 Akademie Verlag On Choice of Subjects and Replicates inEstimating Among and Within Subject Variation WENG WONG KEEof replicates a d number of subjects in a compo- nents of

  13. Modeling and analysis of dynamic decision making in sequential two-choice tasks

    E-Print Network [OSTI]

    is calculated, and thus needs to explore through a series of A and B using rewards as feedback. In this type is related to human factors such as personality. Human decision making in sequential two-choice tasks has

  14. Modeling Decision of Choice Among Finite Alternative: Applications to Marketing and to Transportation Demand Theory

    E-Print Network [OSTI]

    Hauser, John R.

    A methodology to improve the effectiveness of the design of innovation is proposed based on knowledge in the fields of psychometrics, utility theory and stochastic choice modeling. It is comprised of a consumer response ...

  15. Freight mode choice : air transport versus ocean transport in the 1990's

    E-Print Network [OSTI]

    Lewis, Dale B.

    1994-01-01

    Value density is often considered when considering the choice whether to ship cargo by air or by water. However, although cargo value is directly linked to the overall cost of shipment, it is the deciding factor in mode ...

  16. Understanding Sustainable Transportation Choices: Shifting Routine Automobile Travel to Walking and Bicycling

    E-Print Network [OSTI]

    Schneider, Robert James

    2011-01-01

    Schwartz, and J. Hood. “Bicycle Route Choice Data CollectionFactors Associated with Bicycle Ownership and Use: A StudyTime Human Perceptions: Towards a Bicycle Level of Service,”

  17. Negotiating the neighborhood : modeling the relationship between built environment and transit choice

    E-Print Network [OSTI]

    Chheda, Rinal (Rinal Komal)

    2014-01-01

    This thesis examines the relationship between land use and built environment variables and peoples' mode choice for home-based work trips. Many studies recommend that factors like densification, mixed land use, optimal ...

  18. Chu: America Faces a Choice to "Compete in the Clean Energy Race...

    Broader source: Energy.gov (indexed) [DOE]

    faces a choice today: Are we going to recognize the opportunity and compete in the clean energy race or will we wave the white flag and watch all of these jobs go to China, Korea,...

  19. Technologies de base Architectures

    E-Print Network [OSTI]

    Grigoras, .Romulus

    Technologies de base Architectures Cinquième partie Technologies Web Intergiciels et applications communicantes 1 / 38 #12;Technologies de base Architectures Client-serveur HTTP Présentation Plan 1 Technologies Contenu dynamique 2-tier 3-tier V ­ Technologies Web 2 / 38 #12;Technologies de base Architectures Client

  20. Methods and criteria for safety analysis (FIN L2535)

    SciTech Connect (OSTI)

    Not Available

    1992-12-01

    In response to the NRC request for a proposal dated October 20, 1992, Westinghouse Savannah River Company (WSRC) submit this proposal to provide contractural assistance for FIN L2535, ``Methods and Criteria for Safety Analysis,`` as specified in the Statement of Work attached to the request for proposal. The Statement of Work involves development of safety analysis guidance for NRC licensees, arranging a workshop on this guidance, and revising NRC Regulatory Guide 3.52. This response to the request for proposal offers for consideration the following advantages of WSRC in performing this work: Experience, Qualification of Personnel and Resource Commitment, Technical and Organizational Approach, Mobilization Plan, Key Personnel and Resumes. In addition, attached are the following items required by the NRC: Schedule II, Savannah River Site - Job Cost Estimate, NRC Form 189, Project and Budget Proposal for NRC Work, page 1, NRC Form 189, Project and Budget Proposal for NRC Work, page 2, Project Description.

  1. Swing Check Valve Design Criteria and CFD Validation

    SciTech Connect (OSTI)

    Dallstream, Brian E.; Fricke, Brian A.; Becker, Bryan R. [University of Missouri-Kansas City (United States)

    2006-07-01

    This paper provides information on swing check valve selection criteria suitable for nuclear power plant applications. In this project, four swing check valves were analyzed to demonstrate the implementation and application of this information. In this example, swing check valves were selected according to 'ASME Boiler and Pressure Vessel Code, Section III' and 'ASME B16.34, Valves Flanged, Threaded, and Welding End'. This paper also discusses the utilization of Computational Fluid Dynamics Software (CFD) as a means to analyze valve design. The use of CFD is a relatively new approach for validation of valve design that is becoming invaluable due to the high cost of physical bench testing. The Instrument Society of America (ISA) Analysis Division and the American Society of Mechanical Engineers (ASME) Computational Fluid Dynamics Technical Committee have taken a proactive approach in setting standards and practices for the use of CFD in design and validation. (authors)

  2. Fusion Blanket Coolant Section Criteria, Methodology, and Results

    SciTech Connect (OSTI)

    DeMuth, J. A.; Meier, W. R.; Jolodosky, A.; Frantoni, M.; Reyes, S.

    2015-10-02

    The focus of this LDRD was to explore potential Li alloys that would meet the tritium breeding and blanket cooling requirements but with reduced chemical reactivity, while maintaining the other attractive features of pure Li breeder/coolant. In other fusion approaches (magnetic fusion energy or MFE), 17Li- 83Pb alloy is used leveraging Pb’s ability to maintain high TBR while lowering the levels of lithium in the system. Unfortunately this alloy has a number of potential draw-backs. Due to the high Pb content, this alloy suffers from very high average density, low tritium solubility, low system energy, and produces undesirable activation products in particular polonium. The criteria considered in the selection of a tritium breeding alloy are described in the following section.

  3. Design criteria Drain Rerouting Project 93-OR-EW-2

    SciTech Connect (OSTI)

    Not Available

    1993-04-01

    This document contains the design criteria to be used by the architect-engineer (A--E) in the performance of Title I and II design for the Drain Rerouting Project. The Drain Rerouting project at the US Department of Energy`s (DOE) Oak Ridge Reservation in Oak Ridge, Tennessee will provide the Y-12 Plant with the capability to reroute particular drains within buildings 9202, 9203 and 9995. Process drains that are presently connected to the storm sewer shall be routed to the sanitary sewer to ensure that any objectionable material inadvertently discharged into process drains will not discharge to East Fork Popular Creek (EFPC) without treatment. The project will also facilitate compliance with the Y-12 Plant`s National Pollutant Discharge Elimination System (NPDES) discharge permit and allow for future pretreatment of once-through coolant.

  4. Criteria for the evaluation of a dilute decontamination demonstration

    SciTech Connect (OSTI)

    FitzPatrick, V.F.; Divine, J.R.; Hoenes, G.R.; Munson, L.F.; Card, C.J.

    1981-12-01

    This document provides the prerequisite technical information required to evaluate and/or develop a project to demonstrate the dilute chemical decontamination of the primary coolant system of light water reactors. The document focuses on five key areas: the basis for establishing programmatic prerequisites and the key decision points that are required for proposal evaluation and/or RFP (Request for Proposal) issuance; a technical review of the state-of-the-art to identify the potential impacts of a reactor's primary-system decontamination on typical BWR and PWR plants; a discussion of the licensing, recertification, fuel warranty, and institutional considerations and processes; a preliminary identification and development of the selection criteria for the reactor and the decontamination process; and a preliminary identification of further research and development that might be required.

  5. TECHNOLOGY LICENSE APPLICATION Office of Technology Transfer

    E-Print Network [OSTI]

    Page 1 TECHNOLOGY LICENSE APPLICATION Office of Technology Transfer UT-Battelle, LLC (UT. One of the functions of UT-BATTELLE's Office of Technology Transfer is to negotiate license agreements for such intellectual property with companies for commercial applications of ORNL-developed technologies. Such licenses

  6. APPROPRIATE HOME TECHNOLOGY: Depending on Dependable Technology

    E-Print Network [OSTI]

    Sommerville, Ian

    penetrate more and more into people's everyday lives and homes, the `design problem' is not so muchAPPROPRIATE HOME TECHNOLOGY: Depending on Dependable Technology Systems Guy Dewsbury, Karen Clarke 2002 #12;Dewsbury et al (2002): Appropriate Home Technology APPROPRIATE HOME TECHNOLOGY: Depending

  7. Clean coal technologies: Research, development, and demonstration program plan

    SciTech Connect (OSTI)

    Not Available

    1993-12-01

    The US Department of Energy, Office of Fossil Energy, has structured an integrated program for research, development, and demonstration of clean coal technologies that will enable the nation to use its plentiful domestic coal resources while meeting environmental quality requirements. The program provides the basis for making coal a low-cost, environmentally sound energy choice for electric power generation and fuels production. These programs are briefly described.

  8. Trenchless rehabilitation: Which choice for gas distribution pipe replacement?

    SciTech Connect (OSTI)

    Kramer, S.R. [Jason Consultants International, Washington, DC (United States); Gauthier, S.W. [Gas Research Inst., Chicago, IL (United States)

    1995-01-01

    Replacement or rehabilitation of deteriorating gas piping currently relies largely on open-cut excavation or pipe insertion. Open-cut replacement is satisfactory for communities where adverse environmental impact can be tolerated and road closures and traffic delays are kept to a minimum. However, most of the systems in need of replacement/rehabilitation are in urban areas where environmental impact, traffic delays, and site restoration costs are costly. With these parameters in mind, the Gas Research Institute (GRI); and its member organizations designed a research program to test and evaluate promising trenchless technologies for potential use in gas distribution rehabilitation projects. The programs`s goals were to identify product strengths, weaknesses, cost, applications, and recognition of areas which needed modification or further development. During this research a significant amount of data were gathered. All rehabilitation systems maximize pipe capacity while minimizing surface disruptions. Cost savings realized by some of the participating utilities was significant. This is even more impressive when one considers that this was the first gas installation for some of the methods. A summary of advantages, disadvantages, and lessons learned from each process is shown on Tables 2--6. Comments listed are for field trials conducted and may not be accurate or applicable to other projects. A common limitation of all rehabilitation methods is lack of a complete system with appropriate tees, fittings, transition materials, and other connection devices.

  9. Criteria for Selection of Seed Motions to Envelop Design Response Spectra

    Broader source: Energy.gov [DOE]

    Criteria for Selection of Seed Motions to Envelop Design Response Spectra DOE Natural Phenomena Hazards Workshop October 25, 2011 Michael Costantino, Thomas Houston, Greg Mertz, Andrew Maham

  10. Testing Kentucky Coal to Set Design Criteria for a Lurgi Gasification Plant 

    E-Print Network [OSTI]

    Roeger, A., III; Jones, J. E., Jr.

    1983-01-01

    -product characterization, and wastewater treatability. The results from this testing program formed the basis for recommendations concerning technical and environmental design criteria and permit applications....

  11. Recommendations for Modernization of Solid Waste Management Practices in Class -I Cities -Suggestions on Choice of Technology in Indian Context

    E-Print Network [OSTI]

    Columbia University

    Recommendations for Modernization of Solid Waste Management Practices in Class - I Cities. 61') Preamble The Supreme Court Committee for Solid Waste Management in Class-1 Cities in India in the resulting Municipal Solid Waste (Management & Handling) Rules 2000, the recommendation was politically

  12. Fact #814: January 27, 2014 More Choices when Buying Vehicles that Use Advanced Technology and Alternative Fuels

    Broader source: Energy.gov [DOE]

    The number of models and types of alternative fuel vehicles produced by manufacturers has varied considerably over the last 22 years. In 1991, there were a total of 19 models available that did not...

  13. Updated greenhouse gas and criteria air pollutant emission factors and their probability distribution functions for electricity generating units

    SciTech Connect (OSTI)

    Cai, H.; Wang, M.; Elgowainy, A.; Han, J.

    2012-07-06

    Greenhouse gas (CO{sub 2}, CH{sub 4} and N{sub 2}O, hereinafter GHG) and criteria air pollutant (CO, NO{sub x}, VOC, PM{sub 10}, PM{sub 2.5} and SO{sub x}, hereinafter CAP) emission factors for various types of power plants burning various fuels with different technologies are important upstream parameters for estimating life-cycle emissions associated with alternative vehicle/fuel systems in the transportation sector, especially electric vehicles. The emission factors are typically expressed in grams of GHG or CAP per kWh of electricity generated by a specific power generation technology. This document describes our approach for updating and expanding GHG and CAP emission factors in the GREET (Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation) model developed at Argonne National Laboratory (see Wang 1999 and the GREET website at http://greet.es.anl.gov/main) for various power generation technologies. These GHG and CAP emissions are used to estimate the impact of electricity use by stationary and transportation applications on their fuel-cycle emissions. The electricity generation mixes and the fuel shares attributable to various combustion technologies at the national, regional and state levels are also updated in this document. The energy conversion efficiencies of electric generating units (EGUs) by fuel type and combustion technology are calculated on the basis of the lower heating values of each fuel, to be consistent with the basis used in GREET for transportation fuels. On the basis of the updated GHG and CAP emission factors and energy efficiencies of EGUs, the probability distribution functions (PDFs), which are functions that describe the relative likelihood for the emission factors and energy efficiencies as random variables to take on a given value by the integral of their own probability distributions, are updated using best-fit statistical curves to characterize the uncertainties associated with GHG and CAP emissions in life-cycle modeling with GREET.

  14. Plasma technology directory

    SciTech Connect (OSTI)

    Ward, P.P.; Dybwad, G.L.

    1995-03-01

    The Plasma Technology Directory has two main goals: (1) promote, coordinate, and share plasma technology experience and equipment within the Department of Energy; and (2) facilitate technology transfer to the commercial sector where appropriate. Personnel are averaged first by Laboratory and next by technology area. The technology areas are accelerators, cleaning and etching deposition, diagnostics, and modeling.

  15. The Future of Combustion Turbine Technology for Industrial and Utility Power Generation 

    E-Print Network [OSTI]

    Karp, A. D.; Simbeck, D. R.

    1994-01-01

    Low capital cost and ample low-cost natural gas supplies will make natural gas-fired combustion turbine systems the power generation technology of choice over the next decade. Against the background of earlier use by electric utilities, this paper...

  16. Conceptual design of an integrated technology model for carbon policy assessment.

    SciTech Connect (OSTI)

    Backus, George A.; Dimotakes, Paul E.

    2011-01-01

    This report describes the conceptual design of a technology choice model for understanding strategies to reduce carbon intensity in the electricity sector. The report considers the major modeling issues affecting technology policy assessment and defines an implementable model construct. Further, the report delineates the basis causal structure of such a model and attempts to establish the technical/algorithmic viability of pursuing model development along with the associated analyses.

  17. Performance objectives and criteria for conducting DOE environmental audits

    SciTech Connect (OSTI)

    NONE

    1994-01-01

    This document contains the Performance Objectives and Criteria (POC) that have been developed for environmental audits and assessments conducted by the Office of the Assistant Secretary for Environment, Safety and Health. The Environmental POC can serve multiple purposes. Primarily, they are to serve as guidelines for the technical specialists conducted the audits and assessments, and for the team management. The POC can also serve as supporting documents for training of technical discipline specialists and Team Leaders and as bases for DOE programs and field offices and contractors conducting audit or assessment activities or improving environmental protection programs. It must be recognized that not all of the POC will necessarily apply to all DOE facilities. The users of this document must rely upon their knowledge of the facility and their professional judgment, or the judgment of qualified environmental professionals to determine the applicability of each POC. The POC cover eleven technical disciplines: air; surface water and drinking water quality; groundwater; waste management; toxic and chemical materials; radiation; quality assurance; inactive waste sites and releases; ecological and cultural resources; the National Environmental Policy Act (NEPA); and environmental management systems.

  18. Estimating the likelihood of weather criteria exceedance during marine operations

    SciTech Connect (OSTI)

    Brabazon, P.G. [Four Elements Ltd., London (United Kingdom); Gudmestad, O.T. [Statoil, Stavanger (Norway); Hopkins, J.S.

    1996-12-31

    This paper describes an approach to estimating the probability of marine operations being exposed to unsafe weather conditions. Marine operations, both inshore and offshore, are normally sensitive to environmental conditions. For the majority of operations threshold weather criteria will be predefined. An estimate of the likelihood of the operation experiencing bad weather, taking into account the uncertainties in weather forecasting, is of great value. The method is intended to be used as part of a risk assessment of marine operations, enabling the impact of design and scheduling decisions to be assessed in a structured and systematic way. The method has two components. Firstly, the time to complete an operation is defined in the form of a probability/time distribution. This is done by analyzing the duration of the tasks within the operation and identifying possible causes of delays. The likelihood and duration of each delay is estimated. Secondly, a probability/time curve is defined for the weather conditions exceeding the predefined threshold. The curve is determined by reference to the location of the marine operation, the time of year of the operation, the initial weather conditions and the accuracy of weather forecasting. Using the two probability/time curves, the likelihood of exposure is calculated.

  19. Technology Application Centers: Facilitating Technology Transfer 

    E-Print Network [OSTI]

    Kuhel, G. J.

    1994-01-01

    Industrial DSM programs cannot succeed unless customers learn about and implement new technologies in a timely manner. Why? Because this expeditious transfer of new technologies represents the key challenge for the 1990s. This paper explores...

  20. Enhancing technology acceptance: The role of the subsurface contaminants focus area external integration team

    SciTech Connect (OSTI)

    Kirwan-Taylor, H.; McCabe, G.H. [Battelle Seattle Research Center, WA (United States); Lesperance, A. [Pacific Northwest National Lab., Richland, WA (United States); Kauffman, J.; Serie, P.; Dressen, L. [EnvironIssues (United States)

    1996-09-01

    The US DOE is developing and deploying innovative technologies for cleaning up its contaminated facilities using a market-oriented approach. This report describes the activities of the Subsurface Contaminant Focus Area`s (SCFA) External Integration Team (EIT) in supporting DOE`s technology development program. The SCFA program for technology development is market-oriented, driven by the needs of end users. The purpose of EIT is to understand the technology needs of the DOE sites and identify technology acceptance criteria from users and other stakeholders to enhance deployment of innovative technologies. Stakeholders include regulators, technology users, Native Americans, and environmental and other interest groups. The success of this national program requires close coordination and communication among technology developers and stakeholders to work through all of the various phases of planning and implementation. Staff involved must be willing to commit significant amounts of time to extended discussions with the various stakeholders.

  1. Technology Evaluation for Conditioning of Hanford Tank Waste Using Solids Segregation and Size Reduction

    SciTech Connect (OSTI)

    Restivo, Michael L.; Stone, M. E.; Herman, D. T.; Lambert, Daniel P.; Duignan, Mark R.; Smith, Gary L.; Wells, Beric E.; Lumetta, Gregg J.; Enderlin, Carl W.; Adkins, Harold E.

    2014-04-24

    The Savannah River National Laboratory and the Pacific Northwest National Laboratory team performed a literature search on current and proposed technologies for solids segregation and size reduction of particles in the slurry feed from the Hanford Tank Farm. The team also investigated technology research performed on waste tank slurries, both real and simulated, and reviewed academic theory applicable to solids segregation and size reduction. This review included text book applications and theory, commercial applications suitable for a nuclear environment, research of commercial technologies suitable for a nuclear environment, and those technologies installed in a nuclear environment, including technologies implemented at Department of Energy facilities. Information on each technology is provided in this report along with the advantages and disadvantages of the technologies for this application. Any technology selected would require testing to verify the ability to meet the High-Level Waste Feed Waste Acceptance Criteria to the Hanford Tank Waste Treatment and Immobilization Plant Pretreatment Facility.

  2. Expanding the Autism Ontology to DSM-IV Criteria Omri Mugzach1

    E-Print Network [OSTI]

    Peleg, Mor

    Expanding the Autism Ontology to DSM-IV Criteria Omri Mugzach1 , BA; Mor Peleg1 , PhD; Steven C to understand the environmental and genetic factors contributing to autism, we are extending an existing Autism and the DSM-IV criteria. Background: The mechanism of autism is unknown, and it is critical to organize

  3. 1 SEISMIC DESIGN CRITERIA Revolutionary changes have taken place over the

    E-Print Network [OSTI]

    Spencer Jr., Billie F.

    1 SEISMIC DESIGN CRITERIA Revolutionary changes have taken place over the past 50 years the changes in seismic design cri- teria specified by the American Association of State Highway Officials, and transit and high-speed rail aerial structures) are reviewed, giving emphasis to seismic design criteria

  4. Finding the Efficient Frontier of a Bi-Criteria, Spatially-explicit, Harvest Scheduling Problem

    E-Print Network [OSTI]

    Brown, Sally

    Finding the Efficient Frontier of a Bi-Criteria, Spatially-explicit, Harvest Scheduling Problem frontier for a bi-criteria, spatially-explicit harvest scheduling problem. The problem is to find all resources than merely timber production. Increasingly, values such as wildlife habitat, recreation, water

  5. Optimization Criteria for SRAM Design -Lithography Contribution Daniel C. Cole,b

    E-Print Network [OSTI]

    Cole, Dan C.

    Optimization Criteria for SRAM Design - Lithography Contribution Daniel C. Cole,b Orest Bula, to predict and "optimize" the printed shapes through all critical levels in a dense SRAM design. Our key emphasis here is on "optimization criteria," namely, having achieved good predictability for printability

  6. MULTI-CRITERIA DECISION MAKING IN DESIGN OF PRINTED WIRE , O. Palusinski

    E-Print Network [OSTI]

    Palusinski, Olgierd A.

    MULTI-CRITERIA DECISION MAKING IN DESIGN OF PRINTED WIRE BOARDS by Y. Tokat 1 , O. Palusinski 2 , and F. Szidarovszky 1 Abstract This paper presents an application of multi-criteria decision making in system level design of printed wire boards. The main decision variable is the number of signal layers

  7. Manipulation of Signaling Thresholds in ``Engineered Stem Cell Niches'' Identifies Design Criteria for

    E-Print Network [OSTI]

    Zandstra, Peter W.

    Manipulation of Signaling Thresholds in ``Engineered Stem Cell Niches'' Identifies Design Criteria Thresholds in ``Engineered Stem Cell Niches'' Identifies Design Criteria for Pluripotent Stem Cell Screens is the Canada Research Chair in Stem Cell Bioengineering. The funders had no role in study design, data

  8. 2O 2O2O 2OAn Executive's Guide to the Criteria for Performance Excellence

    E-Print Network [OSTI]

    #12;BALDRIGE 2O 2O2O 2OAn Executive's Guide to the Criteria for Performance Excellence That Used the Criteria to Become U.S. Role Models #12;Baldrige Performance Excellence Program National, Millie Glick, Harry Hertz, Scott Kurtz, and Jeff Lucas. Book design and illustrations by Capitol

  9. Design Criteria and Construction of a Capillary Barrier Cover System: The Rocky Mountain Arsenal Experience

    E-Print Network [OSTI]

    Zornberg, Jorge G.

    Design Criteria and Construction of a Capillary Barrier Cover System: The Rocky Mountain Arsenal barrier was found to play a critical role. This paper discusses design studies, construction criteria Systems were recently designed and constructed over contaminated materials at the Rocky Mountain Arsenal

  10. [Last updated 6-4-13] Recommended Criteria and Essential Learning Outcomes for

    E-Print Network [OSTI]

    Wisconsin at Madison, University of

    focus, with a minimum of 25 hours of project-based community engagement by each student in the course. 2 for All Service-Learning Courses 1) Include assessment criteria for student learning as well as assessment[Last updated 6-4-13] Recommended Criteria and Essential Learning Outcomes for Service-Learning

  11. Design and Production Interface in Lean Production: A Performance Improvement Criteria Proposition Proceedings IGLC `98

    E-Print Network [OSTI]

    Tommelein, Iris D.

    Design and Production Interface in Lean Production: A Performance Improvement Criteria Proposition Proceedings IGLC `98 DESIGN AND PRODUCTION INTERFACE IN LEAN PRODUCTION: A PERFORMANCE IMPROVEMENT CRITERIA PROPOSITION Eduardo L. Isatto1 and Carlos T. Formoso2 ABSTRACT Failures on transferring Japanese production

  12. Evaluation Criteria The APEX study is aimed at exploring innovative first wall and blanket concepts

    E-Print Network [OSTI]

    California at Los Angeles, University of

    Small Scale Experiments Preliminary Design Information Criteria (Set 2) Most Promising Concept(s) REvaluation Criteria The APEX study is aimed at exploring innovative first wall and blanket concepts to achieve high availability, and safety and environmental attractiveness. These features can lead

  13. Technology and the Box

    E-Print Network [OSTI]

    Maitland, Padma

    2013-01-01

    study of architecture through references to “Technology andhis new “Architecture for Man” that combines technology withArchitecture and Minarc Architects, two contemporary designers that are pushing prefab technologies

  14. Adoption of New Technology

    E-Print Network [OSTI]

    Hall, Bronwyn H.; Khan, Beethika

    2003-01-01

    Firm Diffusion of New Technology: A Real Options Model. ”and the Adoption of New technology: Evidence from the U.S.affect whether or not new technologies are successful, the

  15. Technology & Engineering Division

    E-Print Network [OSTI]

    Technology & Engineering Division High-Temperature Superconducting Magnets for Fusion: New & Engineering Division Contents · Background on Superconductivity · Fusion Magnets ­ Present and Future ­ Vision/15/2014 2Joseph V. Minervini #12;Technology & Engineering Division Superconductivity #12;Technology

  16. Adoption of New Technology

    E-Print Network [OSTI]

    Hall, Bronwyn H.; Khan, Beethika

    2003-01-01

    Firm Diffusion of New Technology: A Real Options Model. ”and the Adoption of New technology: Evidence from the U.S.the Diffusion of New Technology in the Banking Industry. ”

  17. Vaporizer design criteria for ethanol fueled internal combustion engines 

    E-Print Network [OSTI]

    Ariyaratne, Arachchi Rallage

    1985-01-01

    to gasoline. Rogowski and Taylor (1941) showed that alcohol could be used as an anti-knock agent for gasoline, but that alcohol could not compete economically with petroleum fuels as an engine fuel. These and many other studies show the potential... been identified in conversion of diesel engines of farm tractors for using alcohol fuels. Distillation at atmospheric pressure does not yield 200 proof ethanol, (Winston, 1981), so with present technology, ethanol produced on farms is aqueous. A...

  18. Particle detection technology for space-borne astroparticle experiments

    E-Print Network [OSTI]

    Martin Pohl

    2014-09-05

    I review the transfer of technology from accelerator-based equipment to space-borne astroparticle detectors. Requirements for detection, identification and measurement of ions, electrons and photons in space are recalled. The additional requirements and restrictions imposed by the launch process in manned and unmanned space flight, as well as by the hostile environment in orbit, are analyzed. Technology readiness criteria and risk mitigation strategies are reviewed. Recent examples are given of missions and instruments in orbit, under construction or in the planning phase.

  19. Technology Readiness Assessment Report

    Office of Environmental Management (EM)

    of management decisions by identifying key technologies that have been demonstrated to work or by highlighting immature or unproven technologies that might result in increased...

  20. Promising Technologies List

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    about promising new and underutilized energy-saving technologies available for Federal and commercial building sector deployment. To identify promising technologies,...

  1. Building Technologies Office Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Roland Risser Director, Building Technologies Office Building Technologies Office Overview Our Homes and Buildings Use 40% of Our Nation's Energy and 75% of Electricity Energy Use...

  2. Hydropower Program Technology Overview

    SciTech Connect (OSTI)

    Not Available

    2001-10-01

    New fact sheets for the DOE Office of Power Technologies (OPT) that provide technology overviews, description of DOE programs, and market potential for each OPT program area.

  3. Vehicle Technologies Office: News

    Broader source: Energy.gov [DOE]

    EERE intends to issue, on behalf of its Fuel Cell Technologies Office, a Funding Opportunity Announcement (FOA) entitled "Fuel Cell Technologies Incubator: Innovations in Fuel Cell and Hydrogen...

  4. Building Technologies Office Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technologies Office Roland Risser Director, Building Technologies Office National Energy Consumption 40% 60% Reducing consumption or improving performance calls for cutting-edge...

  5. Essays on University Technology Management

    E-Print Network [OSTI]

    Drivas, Kyriakos

    2011-01-01

    of university technology management and their implicationson University Technology Management by Kyriakos Drivas Aon University Technology Management by Kyriakos Drivas

  6. Morgantown Energy Technology Center, technology summary

    SciTech Connect (OSTI)

    Not Available

    1994-06-01

    This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Morgantown Energy Technology Center (METC). Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. METC`s R&D programs are focused on commercialization of technologies that will be carried out in the private sector. META has solicited two PRDAs for EM. The first, in the area of groundwater and soil technologies, resulted in twenty-one contact awards to private sector and university technology developers. The second PRDA solicited novel decontamination and decommissioning technologies and resulted in eighteen contract awards. In addition to the PRDAs, METC solicited the first EM ROA in 1993. The ROA solicited research in a broad range of EM-related topics including in situ remediation, characterization, sensors, and monitoring technologies, efficient separation technologies, mixed waste treatment technologies, and robotics. This document describes these technology development activities.

  7. 2009 Wind Technologies Market Report

    E-Print Network [OSTI]

    Wiser, Ryan

    2010-01-01

    land- based wind energy technology. 2009 Wind TechnologiesRenewable Energy 2009 WIND TECHNOLOGIES MARKET REPORT AUGUSTfor a variety of energy technologies, including wind energy.

  8. Technology Licensing | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    License ORNL Technologies Licensing Guidelines NDA(s) and MTA(s) Sample Agreements Technology Innovation Program Technology Assistance Program Licensing Staff Technology Search...

  9. Training & Technology Solutions Queens College ~ Office of Information Technology ~ Training & Technology Solutions

    E-Print Network [OSTI]

    Johnson Jr.,, Ray

    Training & Technology Solutions Queens College ~ Office of Information Technology ~ Training & Technology Solutions 718-997-4875 ~ training@qc.cuny.edu ~ I-Bldg 214 Faculty Center Verification & Technology Solutions Queens College ~ Office of Information Technology ~ Training & Technology Solutions 718

  10. The International Safeguards Technology Base: How is the Patient Doing? An Exploration of Effective Metrics

    SciTech Connect (OSTI)

    Schanfein, Mark J; Gouveia, Fernando S

    2010-07-01

    The term “Technology Base” is commonly used but what does it mean? Is there a common understanding of the components that comprise a technology base? Does a formal process exist to assess the health of a given technology base? These are important questions the relevance of which is even more pressing given the USDOE/NNSA initiatives to strengthen the safeguards technology base through investments in research & development and human capital development. Accordingly, the authors will establish a high-level framework to define and understand what comprises a technology base. Potential goal-driven metrics to assess the health of a technology base will also be explored, such as linear demographics and resource availability, in the hope that they can be used to better understand and improve the health of the U.S. safeguards technology base. Finally, through the identification of such metrics, the authors will offer suggestions and highlight choices for addressing potential shortfalls.

  11. Technology assessments in transportation: survey of recent literature

    SciTech Connect (OSTI)

    LaBelle, S.J.

    1980-03-01

    A survey and an evaluation of recent studies of transportation systems done in a technology-assessment framework were undertaken as the basis for a detailed statement of work for a US Department of Energy technology assessment of transportation energy-conservation strategies. Several bibliographies were searched and numerous professionals in the field of technology assessment were contacted regarding current work. Detailed abstracts were prepared for studies judged to be sufficiently broad in coverage of impacts assessed, yet detailed in coverage of all or part of the nation's transportation systems. Some studies were rich in data but not comprehensive in their analytical approach; brief abstracts were prepared for these. An explanation of the criteria used to screen the studies, as well as abstracts of 37 reports, are provided in this compendium of transportation-technology-assessment literature.

  12. An investigation of crack-tip stress field criteria of predicting cleavage-crack initiation

    SciTech Connect (OSTI)

    Keeney-Walker, J.; Bass, B.R.; Landes, J.D. (Oak Ridge National Lab., TN (United States))

    1991-09-01

    Cleavage-crack initiation in large-scale wide-plate (WP) specimens could not be accurately predicted from small, compact (CT) specimens by using a linear-elastic fracture-mechanics, K{sub Ic}, methodology. In the wide-plate tests conducted by the Heavy-Section Steel Technology Program at Oak Ridge National Laboratory, crack initiation has consistently occurred at stress-intensity (K{sub I}) values ranging from two to four times those predicted by the CT specimens. Studies were initiated to develop crack-tip stress field criteria incorporating effects of geometry, size, and constraint that will lead to improved predictions of cleavage initiation in WP specimens from CT specimens. The work centers around nonlinear two-and three-dimensional finite-element analyses of the crack-tip stress fields in these geometries. Analyses were conducted on CT and WP specimens for which cleavage initiation fracture had been measured in laboratory tests. The local crack-tip field generated for these specimens were then used in the evaluation of fracture correlation parameters to augment the K{sub I} parameter for predicting cleavage initiation. Parameters of hydrostatic constraint and of maximum principal stress, measured volumetrically, are included in these evaluations. The results suggest that the cleavage initiation process can be correlated with the local crack-tip fields via a maximum principal stress criterion based on achieving a critical area within a critical stress contour. This criterion has been successfully applied to correlate cleavage initiation in 2T-CT and WP specimen geometries. 23 refs., 16 figs., 5 tabs.

  13. The Mechanics of City-School Initiatives: Transforming Neighborhoods of Distress & Despair into Neighborhoods of Choice & Promise

    E-Print Network [OSTI]

    Bierbaum, Ariel H; Vincent, Jeffrey M; McKoy, Deborah L

    2009-01-01

    The Mechanics of City?School Initiatives: Transforming November 2009  The Mechanics of City?School Initiatives: Choice & Promise  The Mechanics of City?School Initiatives: 

  14. Customizing a VOC control technology

    SciTech Connect (OSTI)

    Enneking, J.C.

    1998-12-31

    An extremely important but very difficult element in applying an emission control device to an exhaust stream is to chose the proper technology. Once it has been determined that recovery, rather than destruction, is appropriate, there are still several process choices available. The type of process is generally dictated by the VOC concentration and total air flow rate. Adsorption is usually chosen for low concentrations and high flow rates while refrigeration is usually best for high concentrations and low flow rates. This paper describes six applications. Adsorption was applied to two of them and condensation to the other four. Solvent vapors from a tape coating operation are recovered in an activated carbon adsorption process and reused. VOC`s from soil vapor extraction operations are captured by activated carbon which is regenerated by a mobile unit. VOC`s displaced from filling tank cars at a refinery are condensed at low temperatures in a high pressure system which uses a pressure swing dryer to remove water. Two different processes were installed to prevent VOC emissions from pharmaceutical processing plants. They both use a thermal swing dryer to remove moisture and low temperature condensation to recover the solvent. With very high concentrations of solvent in an inert gas stream, indirect condensation is used to purify the nitrogen and recover the solvent for reuse. Process flow diagrams and operating results are presented.

  15. Waste management project's alternatives: A risk-based multi-criteria assessment (RBMCA) approach

    SciTech Connect (OSTI)

    Karmperis, Athanasios C.; Sotirchos, Anastasios; Aravossis, Konstantinos; Tatsiopoulos, Ilias P.

    2012-01-15

    Highlights: Black-Right-Pointing-Pointer We examine the evaluation of a waste management project's alternatives. Black-Right-Pointing-Pointer We present a novel risk-based multi-criteria assessment (RBMCA) approach. Black-Right-Pointing-Pointer In the RBMCA the evaluation criteria are based on the quantitative risk analysis of the project's alternatives. Black-Right-Pointing-Pointer Correlation between the criteria weight values and the decision makers' risk preferences is examined. Black-Right-Pointing-Pointer Preference to the multi-criteria against the one-criterion evaluation process is discussed. - Abstract: This paper examines the evaluation of a waste management project's alternatives through a quantitative risk analysis. Cost benefit analysis is a widely used method, in which the investments are mainly assessed through the calculation of their evaluation indicators, namely benefit/cost (B/C) ratios, as well as the quantification of their financial, technical, environmental and social risks. Herein, a novel approach in the form of risk-based multi-criteria assessment (RBMCA) is introduced, which can be used by decision makers, in order to select the optimum alternative of a waste management project. Specifically, decision makers use multiple criteria, which are based on the cumulative probability distribution functions of the alternatives' B/C ratios. The RBMCA system is used for the evaluation of a waste incineration project's alternatives, where the correlation between the criteria weight values and the decision makers' risk preferences is analyzed and useful conclusions are discussed.

  16. TOKYO INSTITUTE OF TECHNOLOGY

    E-Print Network [OSTI]

    TOKYO INSTITUTE OF TECHNOLOGY 2005 TOKYO INSTITUTE OF TECHNOLOGY 152-8550 2 12 1 E3-3 2005 8 TEL. 03 5734 2975 URL. http://www.titech.ac.jp/ PROFILE #12;TOKYO INSTITUTE OF TECHNOLOGY 0201 CONTENTS 03 06 06 08 09 10 15 17 25 31 33 37 41 0201 #12;TOKYO INSTITUTE OF TECHNOLOGY TOKYO INSTITUTE

  17. Predictive Maintenance Technologies

    Broader source: Energy.gov [DOE]

    Several diagnostic technologies and best practices are available to assist Federal agencies with predictive maintenance programs.

  18. Hydrogen delivery technology roadmap

    SciTech Connect (OSTI)

    None, None

    2005-11-15

    Document describing plan for research into and development of hydrogen delivery technology for transportation applications.

  19. Northwest Regional Technology Center

    E-Print Network [OSTI]

    management and public safety professionals to define and prioritize technology needs. Coordinate and leadNorthwest Regional Technology Center for Homeland Security The Northwest Regional Technology Center and deployment of technologies that are effective homeland security solutions for the region, and accelerate

  20. SPACE TECHNOLOGY Actual Estimate

    E-Print Network [OSTI]

    technology readiness of new missions, mitigate their technological risks, improve the quality of cost estimates, and thereby contribute to better overall mission cost management..." Space Technology investmentsSPACE TECHNOLOGY TECH-1 Actual Estimate Budget Authority (in $ millions) FY 2011 FY 2012 FY 2013 FY

  1. Evaluation of the near-term commercial potential of technologies being developed by the Office of Building Technologies

    SciTech Connect (OSTI)

    Weijo, R.O. ); Nicholls, A.K.; Weakley, S.A.; Eckert, R.L.; Shankle, D.L.; Anderson, M.R.; Anderson, A.R. )

    1991-03-01

    This project developed an inventory of the Office of Building Technologies (OBT) from a survey administered in 1988 to program managers and principal investigators from OBT. Information provided on these surveys was evaluated to identify equipment and practices that are near-term opportunities for technology commercialization and to determine whether they needed some form of assistance from OBT to be successful in the marketplace. The near-term commercial potential of OBT technologies was assessed by using a technology selection screening methodology. The screening first identified those technologies that were ready to be commercialized in the next two years. The second screen identified the technologies that had a simple payback period of less than five years, and the third identified those that met a current need in the marketplace. Twenty-six OBT technologies met all the criteria. These commercially promising technologies were further screened to determine which would succeed on their own and which would require further commercialization support. Additional commercialization support was recommended for OBT technologies where serious barriers to adoption existed or where no private sector interest in a technology could be identified. Twenty-three technologies were identified as requiring commercialization support from OBT. These are categorized by each division within OBT and are shown in Table S.1. The methodology used could easily be adapted to screen other DOE-developed technologies to determine commercialization potential and to allocate resources accordingly. It provides a systematic way to analyze numerous technologies and a defensible and documented procedure for comparing them. 4 refs., 7 figs., 10 tabs.

  2. S H R P School of Health Related Professions Choices...Masters in Psychiatric Rehabilitation

    E-Print Network [OSTI]

    Delgado, Mauricio

    it's all about S H R P School of Health Related Professions Choices...Masters in Psychiatric E N C E D E G R E E I N Students who choose UMDNJ's School of Health Related Professions want A B I L I T A T I O N Rehabilitation Counseling and Psychiatric Rehabilitation profession- als provide

  3. Choices...S H R P School of Health Related Professions BS in Health Sciences

    E-Print Network [OSTI]

    Delgado, Mauricio

    it's all about Choices...S H R P School of Health Related Professions BS in Health Sciences_tech_support.htm Students who choose UMDNJ's School of Health Related Professions want a University. Frequently Asked Questions What is the University of Medicine and Dentistry of New Jersey (UMDNJ)? UMDNJ

  4. Editor's Choice Series on Sharing Data and Materials Sharing Publication-Related Data and Materials

    E-Print Network [OSTI]

    Eddy, Sean

    Editor's Choice Series on Sharing Data and Materials Sharing Publication-Related Data and Materials EXECUTIVE SUMMARY The publication of experimental results and shar- ing of research materials related types of data and materials. However, there recently has been concern that, in practice, publication

  5. American black bear habitat selection in northern lower peninsula, Michigan, USA, using discrete-choice modeling

    E-Print Network [OSTI]

    Brown, Daniel G.

    data better than others; both indicated that locations of bears were negatively associated with water bear harvests, sightings, and nuisance reports. Policy makers and wildlife managers can prepare 1991­2000 for 20 males and 35 females. We developed Bayesian random effects discrete-choice models

  6. American black bear habitat selection in northern Lower Peninsula, Michigan, USA, using discrete-choice modeling

    E-Print Network [OSTI]

    data better than others; both indicated that locations of bears were negatively associated with water bear harvests, sightings, and nuisance reports. Policy makers and wildlife managers can prepare 1991­2000 for 20 males and 35 females. We developed Bayesian random effects discrete-choice models

  7. Portfolio Choice and Life Insurance H. Huang, M. Milevsky and J. Wang

    E-Print Network [OSTI]

    Huang, Huaxiong

    Insurance We study a class of portfolio choice problems that combine life insurance and labor in- come face value of life insurance is remarkably insensitive to the family's risk aversion. KEYWORDS: Actuarial Finance, Personal Risk Management, Portfolio Theory, Hamilton- Jacobi-Bellman Equation, Similarity

  8. Sensor Choice for Parameter Modulations in Digital Musical Instruments: Empirical Evidence from Pitch Modulation

    E-Print Network [OSTI]

    Levitin, Daniel

    Sensor Choice for Parameter Modulations in Digital Musical Instruments: Empirical Evidence from instruments (DMIs). While many new DMIs have been created using a variety of sensors, there has been the development of new digital musical instru- ments. A digital musical instrument (DMI) is essentially any

  9. US Vehicle Choice Survey UT Austin Internal Review Board # 2009-03-0095

    E-Print Network [OSTI]

    Kockelman, Kara M.

    is conducting a research study to explore vehicle choices, under various energy policies and vehicle and usage patterns are important topics. This research project seeks to better understand the patterns) Bus Not applicable Work School Food Shopping Non-food Shopping

  10. Forest Management Regime and Species choice options in a changing environment

    E-Print Network [OSTI]

    Forest Management Regime and Species choice ­ options in a changing environment Bill Mason, Forest.mason@forestry.gsi.gov.uk May 18 2010 #12;2 Talk Structure 1. Introduction; 2. Species 3. Forest types; 4. Management regime; 5 essential] to make it more resilient to climate change over the next 50-100 years. Resilience implies

  11. Chapter 4. Multiple Choice Concept Tests: The Force Concept Inventory (FCI)

    E-Print Network [OSTI]

    Maryland at College Park, University of

    102 Chapter 4. Multiple Choice Concept Tests: The Force Concept Inventory (FCI) I. CHAPTER OVERVIEW In the early 1980s, McDermott,1 Viennot,2 and other physics education researchers3, 4 found that each student concepts in mechanics. At the same time Hestenes and Halloun5 at Arizona State University began developing

  12. Direct Use of Natural Gas: Economic Fuel Choices from the Regional Power

    E-Print Network [OSTI]

    Direct Use of Natural Gas: Economic Fuel Choices from the Regional Power System and Consumer's Perspective Council document 2012-01 Background Is it better to use natural gas directly in water heaters; total-energy efficiency, fuel switching, direct use of gas, and others. The natural gas companies

  13. Short Communication Whole blood is the sample matrix of choice for monitoring systemic

    E-Print Network [OSTI]

    Hammock, Bruce D.

    Short Communication Whole blood is the sample matrix of choice for monitoring systemic triclocarban of TCC indicates that absorbed TCC must be systemically available and thus be present in blood was successfully utilized to assess the systemic TCC levels in exposed humans. 1.1. In vitro experiments Blood from

  14. Willingness to Pay for Strawberries: Effect of Number of Choices Using Nonhypothetical Valuation Procedures 

    E-Print Network [OSTI]

    Chavez, Daniel

    2015-07-15

    TO PAY FOR STRAWBERRIES: EFFECT OF NUMBER OF CHOICES USING NONHYPOTHETICAL VALUATION PROCEDURES A Thesis by DANIEL EDUARDO CHAVEZ Submitted to the Office of Graduate and Professional Studies of Texas A&M University in partial fulfillment.... ......................................................................................... 39 Table 4: Kruskal-Wallis results for WTP for strawberries variety with number of alternatives. ............................................................................................................ 40 Table 5. Wilcoxon rank-sum test z...

  15. Human choice and climate change. Volume 4: What have we learned

    SciTech Connect (OSTI)

    Rayner, S.; Malone, E.L.

    1997-12-31

    Foreward: Preface; Why study human choice and climate change; The challenge of climate change to the social sciences; Social science insights into climate change; Ten suggestions for policymakers; Key data on human activity and climate change; and Sponsoring organizations, International Advisory Board, and project participants.

  16. Evaluation of Texas-Farmer Choices For The 2014 U.S. Farm Bill 

    E-Print Network [OSTI]

    Mazurkiewicz, Stephanie Diane

    2015-07-29

    The 2014 Farm Bill eliminated direct payments to farmers in favor of two alternative safety net programs; Price Loss Coverage (PLC) and Agriculture Risk Coverage (ARC). Farmers must make a one-time, irrevocable choice of PLC, a county ARC program...

  17. Modeling the Choice of Residential Location and Home Type: Recent Movers in Austin, Texas

    E-Print Network [OSTI]

    Kockelman, Kara M.

    -range travel demand forecasting [8]. Of course, residential mobility decisions are complex, involving variousModeling the Choice of Residential Location and Home Type: Recent Movers in Austin, Texas Khandker constrained by home availability across locations of the urban area. Thus, a focus simply on residential

  18. Online optimization and choice of optimization variables for control of heat exchanger networks

    E-Print Network [OSTI]

    Skogestad, Sigurd

    On­line optimization and choice of optimization variables for control of heat exchanger networks B operation of a general heat exchanger network with given structure, heat exchanger areas and stream data to any heat exchanger network. Using this model periodically for optimization, the operating conditions

  19. On-line optimization and choice of optimization variables for control of heat exchanger networks

    E-Print Network [OSTI]

    Skogestad, Sigurd

    On-line optimization and choice of optimization variables for control of heat exchanger networks B operation of a general heat exchanger network with given structure, heat exchanger areas and stream data to any heat exchanger network. Using this model periodically for optimization, the operating conditions

  20. Joint leverage and maturity choices in real estate firms: The role of the REIT status

    E-Print Network [OSTI]

    Alcock, Jamie T.; Steiner, Eva; Tan, Kelvin J. K.

    2012-05-22

    We explore the interdependence of leverage and debt maturity choices in Real Estate Investment Trusts (REITs) and unregulated listed real estate investment companies in the U.S. for the period 1973-2011. We find that the leverage and maturity...

  1. IT STANDARDS CHOICES AND INDUSTRY STRUCTURE OUTCOMES: THE CASE OF THE UNITED STATES HOME MORTGAGE INDUSTRY

    E-Print Network [OSTI]

    Steinfield, Charles

    applicable to many industries. This paper explores the potential industry structure effects of verticalIT STANDARDS CHOICES AND INDUSTRY STRUCTURE OUTCOMES: THE CASE OF THE UNITED STATES HOME MORTGAGE INDUSTRY Rolf T. Wigand Maulden-Entergy Chair and Distinguished Professor of Information Science

  2. What is Economics? Economics is the study of choice and decision-

    E-Print Network [OSTI]

    Saldin, Dilano

    What is Economics? Economics is the study of choice and decision- making in the face of scarce countries or entire industries such as manufacturing. Career Opportunities and Salary Economics graduates, insurance adjustor, and LettersandScienceCollegeof Contact the Department of Economics: Bolton 802 phone

  3. Modeling the choice to switch from fuelwood to electricity Implications for giant panda habitat conservation

    E-Print Network [OSTI]

    Lupi, Frank

    Dependence on fuelwood as the major energy source in rural areas of many developing countries has caused uses biomass fuels, accounting for 35% of the energy supplies in the developing countries (World BankANALYSIS Modeling the choice to switch from fuelwood to electricity Implications for giant panda

  4. Comparative Sequencing of Plant Genomes: Choices to Make The first sequenced genome of a plant,

    E-Print Network [OSTI]

    Purugganan, Michael D.

    COMMENTARY Comparative Sequencing of Plant Genomes: Choices to Make The first sequenced genome of a plant, Arabidopsis thaliana, was published ,6 years ago (Arabidopsis Genome Initiative, 2000). Since that time, the complete rice genome (Oryza sativa; Goff et al., 2002; Yu et al., 2002; International Rice

  5. Integrated Reasoning and Proof Choice Point Selection in the Jahob System

    E-Print Network [OSTI]

    Rinard, Martin

    provides a general integrated reasoning framework, which enables multiple automated reasoning systemsIntegrated Reasoning and Proof Choice Point Selection in the Jahob System (Mechanisms for Program reasoning systems. We have leveraged these systems to build Jahob, a program specification, analysis

  6. An empirical test of partner choice mechanisms in a wild legumerhizobium interaction

    E-Print Network [OSTI]

    Sachs, Joel

    species exchange goods and services to their mutual benefit. Trade between partners with conflicting interests requires mechanisms to prevent exploitation. Partner choice theory proposes that individuals might. Our survey of wild-grown plants showed that larger nodules house more Bradyrhizobia, indicating

  7. Non-cooperative Spectrum Access The Dedicated vs. Free Spectrum Choice

    E-Print Network [OSTI]

    Zussman, Gil

    Non-cooperative Spectrum Access ­ The Dedicated vs. Free Spectrum Choice Krishna Jagannathan MIT 77 consider a dynamic spectrum access system in which Secondary Users (SUs) choose to either acquire dedicated dedicated bands to SUs. Finally, we extend the scope to a scenario with multi- ple PUs, show that the band

  8. Selection of Model in Developing Information Security Criteria for Smart Grid Security System

    E-Print Network [OSTI]

    Ling, Amy Poh Ai

    2011-01-01

    At present, the "Smart Grid" has emerged as one of the best advanced energy supply chains. This paper looks into the security system of smart grid via the smart planet system. The scope focused on information security criteria that impact on consumer trust and satisfaction. The importance of information security criteria is perceived as the main aspect to impact on customer trust throughout the entire smart grid system. On one hand, this paper also focuses on the selection of the model for developing information security criteria on a smart grid.

  9. Waste acceptance criteria for the Waste Isolation Pilot Plant. Revision 4

    SciTech Connect (OSTI)

    Not Available

    1991-12-01

    This Revision 4 of the Waste Acceptance Criteria (WAC), WIPP-DOE-069, identifies and consolidates existing criteria and requirements which regulate the safe handling and preparation of Transuranic (TRU) waste packages for transportation to and emplacement in the Waste Isolation Pilot Plant (WIPP). This consolidation does not invalidate any existing certification of TRU waste to the WIPP Operations and Safety Criteria (Revision 3 of WIPP-DOE--069) and/or Transportation: Waste Package Requirements (TRUPACT-II Safety Analysis Report for Packaging [SARP]). Those documents being consolidated, including Revision 3 of the WAC, currently support the Test Phase.

  10. Materials technology assessment for a 1050 K Stirling Space Engine design

    SciTech Connect (OSTI)

    Scheuermann, C.M.; Dreshfield, R.L.; Gaydosh, D.J.; Kiser, J.D.; MacKay, R.A.; McDanels, D.L.; Petrasek, D.W.; Vannucci, R.D.; Bowles, K.J.; Watson, G.K.

    1988-10-01

    An assessment of materials technology and proposed materials selection was made for the 1050 K (superalloy) Stirling Space Engine design. The objectives of this assessment were to evaluate previously proposed materials selections, evaluate the current state-of-the-art materials, propose potential alternate materials selections and identify research and development efforts needed to provide materials that can meet the stringent system requirements. This assessment generally reaffirmed the choices made by the contractor; however, in many cases alternative choices were described and suggestions for needed materials and fabrication research and development were made.

  11. Nuclear facilities: criteria for the design and operation of ventilation systems for nuclear installations other than nuclear reactors

    E-Print Network [OSTI]

    International Organization for Standardization. Geneva

    2004-01-01

    Nuclear facilities: criteria for the design and operation of ventilation systems for nuclear installations other than nuclear reactors

  12. Vehicle Technologies Office: 2008 Advanced Vehicle Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Vehicle Technology Analysis and Evaluation Activities and Heavy Vehicle Systems Optimization Program Annual Progress Report Well-to-Wheels Analysis of Energy Use and...

  13. Vehicle Technologies Office: 2009 Advanced Vehicle Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Vehicle Technology Analysis and Evaluation Activities and Heavy Vehicle Systems Optimization Program Annual Progress Report 2009avtaehvso.pdf More Documents &...

  14. Energy technologies and the environment: Environmental information handbook

    SciTech Connect (OSTI)

    Not Available

    1988-10-01

    This revision of Energy Technologies and the Environment reflects the changes in energy supply and demand, focus of environmental concern, and emphasis of energy research and development that have occurred since publication of the earlier edition in 1980. The increase in availability of oil and natural gas, at least for the near term, is responsible in part for a reduced emphasis on development of replacement fuels and technologies. Trends in energy development also have been influenced by an increased reliance on private industry initiatives, and a correspondingly reduced government involvement, in demonstrating more developed technologies. Environmental concerns related to acid rain and waste management continue to increase the demand for development of innovative energy systems. The basic criteria for including a technology in this report are that (1) the technology is a major current or potential future energy supply and (2) significant changes in employing or understanding the technology have occurred since publication of the 1980 edition. Coal is seen to be a continuing major source of energy supply, and thus chapters pertaining to the principal coal technologies have been revised from the 1980 edition (those on coal mining and preparation, conventional coal-fired power plants, fluidized-bed combustion, coal gasification, and coal liquefaction) or added as necessary to include emerging technologies (those on oil shale, combined-cycle power plants, coal-liquid mixtures, and fuel cells).

  15. A Monte Carlo Based Analysis of Optimal Design Criteria H. T. Banks, Kathleen J. Holm and Franz Kappel

    E-Print Network [OSTI]

    A Monte Carlo Based Analysis of Optimal Design Criteria H. T. Banks, Kathleen J. Holm and Franz compare a recent design criteria, SE-optimal design (standard error optimal design [8]) with the more [11, 14, 15, 22]). Since one has a number of different design criteria from which to choose

  16. How Assessing Plasticity Design Choices Can Improve UI Quality: A Case Study

    E-Print Network [OSTI]

    recorded in terms of their influence on UI ergonomic quality, using Ergonomic Criteria. The interesting, quality in use. ACM classification H.5.2 User Interfaces: Evaluation/methodology. General terms Design] for example). Regarding ergonomic quality, changing the platform is frequently considered at first sight

  17. Example Procedures for Developing Acceptance-Range Criteria for BESTEST-EX

    SciTech Connect (OSTI)

    Ron Judkoff, Ben Polly, Marcus Bianchi

    2010-08-01

    This document provides an example procedure for establishing acceptance-range criteria to assess results from software undergoing BESTEST-EX. This example method for BESTEST-EX is a modified version of the method described in HERS BESTEST.

  18. Larger Teaching and Learning Development Projects Proposal Criteria (3 pages maximum)

    E-Print Network [OSTI]

    . A. Question(s) to be investigated. (Usually will be focused on student Larger Teaching and Learning Development Projects Proposal Criteria (3 learning) B. General Rationale and Description: Why is this question

  19. Developing and assessing accident management plans for nuclear power plants, Development process and criteria. Volume 1

    SciTech Connect (OSTI)

    Hanson, D.J.; Blackman, H.S.; Meyer, O.R.; Ward, L.W. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

    1992-08-01

    This document is the first volume of a two-volume NUREG/CR. It describes a four-phase approach for developing criteria that can be used for assessing the adequacy of severe accident management plans for nuclear power plants. The general attributes of accident management plans (Phase 1) are identified, and a process for developing and implementing severe accident management plans (Phase 2) is described. This process is based on a prototype process described in NUREG/CR-5543. The prototype process was revised using results from an evaluation of this process (Phase 3), which is documented in Volume 2. General criteria for assessing the adequacy of accident management plans are also presented (Phase 4). These criteria were based on process specific criteria presented in Volume 2 and NUREG/CR-5543.

  20. Developing and assessing accident management plans for nuclear power plants, Development process and criteria

    SciTech Connect (OSTI)

    Hanson, D.J.; Blackman, H.S.; Meyer, O.R.; Ward, L.W. (Idaho National Engineering Lab., Idaho Falls, ID (United States))

    1992-08-01

    This document is the first volume of a two-volume NUREG/CR. It describes a four-phase approach for developing criteria that can be used for assessing the adequacy of severe accident management plans for nuclear power plants. The general attributes of accident management plans (Phase 1) are identified, and a process for developing and implementing severe accident management plans (Phase 2) is described. This process is based on a prototype process described in NUREG/CR-5543. The prototype process was revised using results from an evaluation of this process (Phase 3), which is documented in Volume 2. General criteria for assessing the adequacy of accident management plans are also presented (Phase 4). These criteria were based on process specific criteria presented in Volume 2 and NUREG/CR-5543.

  1. The Generation of Criteria for Selecting Analytical Tools for Landscape Management1

    E-Print Network [OSTI]

    wind generating turbine, or acres of solar collectors, or nu- clear power plants with their cooling: 305 #12;· Environmental impact assessThe Generation of Criteria for Selecting Analytical Tools for Landscape Management1 By Marilyn

  2. Development of HVAC System Performance Criteria Using Factorial Design and DOE-2 Simulation 

    E-Print Network [OSTI]

    Hou, D.; Jones, J. W.; Hunn, B. D.; Banks, J. A.

    1996-01-01

    A new approach is described for the development of Heating, Ventilating, and Air-conditioning (HVAC) System Performance Criteria for the Texas Building Energy Design Standard. This approach integrates a design of experimental methodology and DOE-2...

  3. Acoustical and Noise Control Criteria and Guidelines for Building Design and Operations 

    E-Print Network [OSTI]

    Evans, J. B.; Himmel, C. N.

    2009-01-01

    , which affects building occupants, sensitive installations, and functional uses. Various noise and vibration design criteria, field measurements, design concepts and specifications can be applied in facilities to achieve noise mitigation and vibration...

  4. Numerical assessment of stability criteria from disturbance energies in gaseous combustion

    E-Print Network [OSTI]

    Nicoud, Franck

    Numerical assessment of stability criteria from disturbance energies in gaseous combustion A, which corresponds to a ducted, laminar premixed propane-air flame, is used to assess the different terms

  5. Reliability-based calibration of design seismic response spectra and structural acceptance criteria

    E-Print Network [OSTI]

    Baker, Jack W.

    Reliability-based calibration of design seismic response spectra and structural acceptance criteria: Earthquake engineering design requires an evaluation of the structure's reliability over future seismic loads alternate "explicit" check, which commonly specifies a design spectrum and associated structural response

  6. Assessing Software Engineering Technology Transfer

    E-Print Network [OSTI]

    Zelkowitz, Marvin V.

    , and technology infusion, or the adoption of a new technology by an individual organization. 1 #12;Table ¢ ¡ £ ¡ ¢ ¡ ¡ ¢ ¡ ¡ ¡ ¢ ¡ £ ¤ £ ¡ ¡ ¢ ¡ ¡ ¢ ¡ ¡ £ ¤ £ ¡ ¢ ¡ ¡ ¡ ¢ ¡ ¡ ¢ ¡ £ ¡ ¢ 15 3.4 Exporting and Infusing Technology ¡ ¡ ¡ ¢ ¡ £ ¤ £ ¡ ¡ ¢ ¡ ¡ ¢ ¡ ¡ £ ¤ £ ¡ ¢ ¡ ¡ ¡ ¢ ¡ ¡ ¢ ¡ £ ¡ ¢ 16 4 Infusion of Technology 18 4.1 Technologies of Interest

  7. SHARED TECHNOLOGY TRANSFER PROGRAM

    SciTech Connect (OSTI)

    GRIFFIN, JOHN M. HAUT, RICHARD C.

    2008-03-07

    The program established a collaborative process with domestic industries for the purpose of sharing Navy-developed technology. Private sector businesses were educated so as to increase their awareness of the vast amount of technologies that are available, with an initial focus on technology applications that are related to the Hydrogen, Fuel Cells and Infrastructure Technologies (Hydrogen) Program of the U.S. Department of Energy. Specifically, the project worked to increase industry awareness of the vast technology resources available to them that have been developed with taxpayer funding. NAVSEA-Carderock and the Houston Advanced Research Center teamed with Nicholls State University to catalog NAVSEA-Carderock unclassified technologies, rated the level of readiness of the technologies and established a web based catalog of the technologies. In particular, the catalog contains technology descriptions, including testing summaries and overviews of related presentations.

  8. Assessment of technologies for hazardous waste site remediation: Non-treatment technologies and pilot scale facility implementation -- excavation -- storage technology -- safety analysis and review statement. Final report

    SciTech Connect (OSTI)

    Johnson, H.R.; Overbey, W.K. Jr.; Koperna, G.J. Jr.

    1994-02-01

    The purpose of this study is to assess the state-of-the-art of excavation technology as related to environmental remediation applications. A further purpose is to determine which of the excavation technologies reviewed could be used by the US Corp of Engineers in remediating contaminated soil to be excavated in the near future for construction of a new Lock and Dam at Winfield, WV. The study is designed to identify excavation methodologies and equipment which can be used at any environmental remediation site but more specifically at the Winfield site on the Kanawha River in Putnam County, West Virginia. A technical approach was determined whereby a functional analysis was prepared to determine the functions to be conducted during the excavation phase of the remediation operations. A number of excavation technologies were identified from the literature. A set of screening criteria was developed that would examine the utility and ranking of the technologies with respect to the operations that needed to be conducted at the Winfield site. These criteria were performance, reliability, implementability, environmental safety, public health, and legal and regulatory compliance. The Loose Bulk excavation technology was ranked as the best technology applicable to the Winfield site. The literature was also examined to determine the success of various methods of controlling fugitive dust. Depending upon any changes in the results of chemical analyses, or prior remediation of the VOCs from the vadose zone, consideration should be given to testing a new ``Pneumatic Excavator`` which removes the VOCs liberated during the excavation process as they outgas from the soil. This equipment however would not be needed on locations with low levels of VOC emissions.

  9. Porting Choices to ARM Architecture Based Platforms Francis M. David, Ellick M. Chan, Jeffrey C. Carlyle, Roy H. Campbell

    E-Print Network [OSTI]

    Campbell, Roy

    Porting Choices to ARM Architecture Based Platforms Francis M. David, Ellick M. Chan, Jeffrey C system, has been ported to the ARM architecture. The porting effort was based on the exising code-base for the SPARC pro- cessor based SPARCStation 1. Choices supports two ARM-based machine configurations: the Texas

  10. Natural Phenomena Hazard Analysis and Design Criteria for Department of Energy Facilities

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2012-08-03

    This Department of Energy (DOE) Standard (STD)-1020-2012, Natural Phenomena Hazards Analysis and Design Criteria for DOE Facilities, provides criteria and guidance for the analysis and design of facility structures, systems, and components (SSCs) that are necessary to implement the requirements of DOE Order (O) 420.1C, Facility Safety, and to ensure that the SSCs will be able to effectively perform their intended safety functions under the effects of natural phenomena hazards (NPHs).

  11. Package of facts and theorems for efficiently generating entanglement criteria for many qubits

    E-Print Network [OSTI]

    Marcin Wie?niak; Koji Maruyama

    2012-06-25

    We present a package of mathematical theorems, which allow to construct multipartite entanglement criteria. Importantly, establishing bounds for certain classes of entanglement does not take an optimization over continuous sets of states. These bonds are found from the properties of commutativity graphs of operators used in the criterion. We present two examples of criteria constructed according to our method. One of them detects genuine 5-qubit entanglement without ever referring to correlations between all five qubits.

  12. Natural phenomena hazards design and evaluation criteria for Department of Energy Facilities

    SciTech Connect (OSTI)

    NONE

    1996-01-01

    The Department of Energy (DOE) has issued an Order 420.1 which establishes policy for its facilities in the event of natural phenomena hazards (NPH) along with associated NPH mitigation requirements. This DOE Standard gives design and evaluation criteria for NPH effects as guidance for implementing the NPH mitigation requirements of DOE Order 420.1 and the associated implementation Guides. These are intended to be consistent design and evaluation criteria for protection against natural phenomena hazards at DOE sites throughout the United States. The goal of these criteria is to assure that DOE facilities can withstand the effects of natural phenomena such as earthquakes, extreme winds, tornadoes, and flooding. These criteria apply to the design of new facilities and the evaluation of existing facilities. They may also be used for modification and upgrading of existing facilities as appropriate. The design and evaluation criteria presented herein control the level of conservatism introduced in the design/evaluation process such that earthquake, wind, and flood hazards are treated on a consistent basis. These criteria also employ a graded approach to ensure that the level of conservatism and rigor in design/evaluation is appropriate for facility characteristics such as importance, hazards to people on and off site, and threat to the environment. For each natural phenomena hazard covered, these criteria consist of the following: Performance Categories and target performance goals as specified in the DOE Order 420.1 NPH Implementation Guide, and DOE-STD-1 021; specified probability levels from which natural phenomena hazard loading on structures, equipment, and systems is developed; and design and evaluation procedures to evaluate response to NPH loads and criteria to assess whether or not computed response is permissible.

  13. Natural phenomena hazards design and evaluation criteria for Department of Energy Facilities

    SciTech Connect (OSTI)

    Not Available

    1994-04-01

    This DOE standard gives design and evaluation criteria for natural phenomena hazards (NPH) effects as guidance for implementing the NPH mitigation requirements of DOE 5480.28. Goal of the criteria is to assure that DOE facilities can withstand the effects of earthquakes, extreme winds, tornadoes, flooding, etc. They apply to the design of new facilities and the evaluation of existing facilities; they may also be used for modification and upgrading of the latter.

  14. Design criteria for a self-actuated shutdown system to ensure limitation of core damage. [LMFBR

    SciTech Connect (OSTI)

    Deane, N.A.; Atcheson, D.B.

    1981-09-01

    Safety-based functional requirements and design criteria for a self-actuated shutdown system (SASS) are derived in accordance with LOA-2 success criteria and reliability goals. The design basis transients have been defined and evaluated for the CDS Phase II design, which is a 2550 MWt mixed oxide heterogeneous core reactor. A partial set of reactor responses for selected transients is provided as a function of SASS characteristics such as reactivity worth, trip points, and insertion times.

  15. Recent advances in lithium ion technology

    SciTech Connect (OSTI)

    Levy, S.C.

    1995-01-01

    Lithium ion technology is based on the use of lithium intercalating electrodes. Carbon is the most commonly used anode material, while the cathode materials of choice have been layered lithium metal chalcogenides (LiMX{sub 2}) and lithium spinel-type compounds. Electrolytes may be either organic liquids or polymers. Although the first practical use of graphite intercalation compounds as battery anodes was reported in 1981 for molten salt cells (1) and in 1983 for ambient temperature systems (2) it was not until Sony Energytech announced a new lithium ion rechargeable cell containing a lithium ion intercalating carbon anode in 1990, that interest peaked. The reason for this heightened interest is that these cells have the high energy density, high voltage and fight weight of metallic lithium systems plus a very long cycle life, but without the disadvantages of dendrite formation on charge and the safety considerations associated with metallic lithium.

  16. Technical Basis for Certification of Seismic Design Criteria for the Waste Treatment Plant, Hanford, Washington

    SciTech Connect (OSTI)

    Brouns, Thomas M.; Rohay, Alan C.; Youngs, Robert R.; Costantino, Carl J.; Miller, Lewis F.

    2008-02-28

    In August 2007, Secretary of Energy Samuel W. Bodman approved the final seismic and ground motion criteria for the Waste Treatment and Immobilization Plant (WTP) at the Department of Energy’s (DOE) Hanford Site. Construction of the WTP began in 2002 based on seismic design criteria established in 1999 and a probabilistic seismic hazard analysis completed in 1996. The design criteria were re-evaluated in 2005 to address questions from the Defense Nuclear Facilities Safety Board (DNFSB), resulting in an increase by up to 40% in the seismic design basis. DOE announced in 2006 the suspension of construction on the pretreatment and high-level waste vitrification facilities within the WTP to validate the design with more stringent seismic criteria. In 2007, the U.S. Congress mandated that the Secretary of Energy certify the final seismic and ground motion criteria prior to expenditure of funds on construction of these two facilities. With the Secretary’s approval of the final seismic criteria this past summer, DOE authorized restart of construction of the pretreatment and high-level waste vitrification facilities.

  17. ADVANCED RECIPROCATING COMPRESSION TECHNOLOGY (ARCT)

    SciTech Connect (OSTI)

    Danny M. Deffenbaugh; Klaus Brun; Ralph E. Harris; J. Pete Harrell; Robert J. Mckee; J. Jeffrey Moore; Steven J. Svedeman; Anthony J. Smalley; Eugene L. Broerman; Robert A Hart; Marybeth G. Nored; Ryan S. Gernentz; Shane P. Siebenaler

    2005-12-01

    The U.S. natural gas pipeline industry is facing the twin challenges of increased flexibility and capacity expansion. To meet these challenges, the industry requires improved choices in gas compression to address new construction and enhancement of the currently installed infrastructure. The current fleet of installed reciprocating compression is primarily slow-speed integral machines. Most new reciprocating compression is and will be large, high-speed separable units. The major challenges with the fleet of slow-speed integral machines are: limited flexibility and a large range in performance. In an attempt to increase flexibility, many operators are choosing to single-act cylinders, which are causing reduced reliability and integrity. While the best performing units in the fleet exhibit thermal efficiencies between 90% and 92%, the low performers are running down to 50% with the mean at about 80%. The major cause for this large disparity is due to installation losses in the pulsation control system. In the better performers, the losses are about evenly split between installation losses and valve losses. The major challenges for high-speed machines are: cylinder nozzle pulsations, mechanical vibrations due to cylinder stretch, short valve life, and low thermal performance. To shift nozzle pulsation to higher orders, nozzles are shortened, and to dampen the amplitudes, orifices are added. The shortened nozzles result in mechanical coupling with the cylinder, thereby, causing increased vibration due to the cylinder stretch mode. Valve life is even shorter than for slow speeds and can be on the order of a few months. The thermal efficiency is 10% to 15% lower than slow-speed equipment with the best performance in the 75% to 80% range. The goal of this advanced reciprocating compression program is to develop the technology for both high speed and low speed compression that will expand unit flexibility, increase thermal efficiency, and increase reliability and integrity. Retrofit technologies that address the challenges of slow-speed integral compression are: (1) optimum turndown using a combination of speed and clearance with single-acting operation as a last resort; (2) if single-acting is required, implement infinite length nozzles to address nozzle pulsation and tunable side branch absorbers for 1x lateral pulsations; and (3) advanced valves, either the semi-active plate valve or the passive rotary valve, to extend valve life to three years with half the pressure drop. This next generation of slow-speed compression should attain 95% efficiency, a three-year valve life, and expanded turndown. New equipment technologies that address the challenges of large-horsepower, high-speed compression are: (1) optimum turndown with unit speed; (2) tapered nozzles to effectively reduce nozzle pulsation with half the pressure drop and minimization of mechanical cylinder stretch induced vibrations; (3) tunable side branch absorber or higher-order filter bottle to address lateral piping pulsations over the entire extended speed range with minimal pressure drop; and (4) semi-active plate valves or passive rotary valves to extend valve life with half the pressure drop. This next generation of large-horsepower, high-speed compression should attain 90% efficiency, a two-year valve life, 50% turndown, and less than 0.75 IPS vibration. This program has generated proof-of-concept technologies with the potential to meet these ambitious goals. Full development of these identified technologies is underway. The GMRC has committed to pursue the most promising enabling technologies for their industry.

  18. Training & Technology Solutions Queens College ~ Office of Converging Technologies ~ Training & Technology Solutions

    E-Print Network [OSTI]

    Johnson Jr.,, Ray

    Training & Technology Solutions Queens College ~ Office of Converging Technologies ~ Training & Technology Solutions 718-997-4875 ~ training@qc.cuny.edu ~ I-Bldg 214 Advisor Center Navigation: Login #12;Training & Technology Solutions Queens College ~ Office of Converging Technologies ~ Training

  19. Comparative analysis of automotive powertrain choices for the near to mid-term future

    E-Print Network [OSTI]

    Kasseris, Emmanuel P

    2006-01-01

    This thesis attempts a technological assessment of automotive powertrain technologies for the near to mid term future. The powertrain types to be assessed include naturally aspirated gasoline engines, turbocharged gasoline ...

  20. Compressed air energy storage technology program. Annual report for 1979

    SciTech Connect (OSTI)

    Loscutoff, W.V.

    1980-06-01

    The objectives of the Compressed Air Energy Storage (CAES) program are to establish stability criteria for large underground reservoirs in salt domes, hard rock, and porous rock used for air storage in utility applications, and to develop second-generation CAES technologies that have minimal or no dependence on petroleum fuels. During the year reported reports have been issued on field studies on CAES on aquifers and in salt, stability, and design criteria for CAES and for pumped hydro-storage caverns, laboratory studies of CAES in porous rock reservoris have continued. Research has continued on combined CAES/Thermal Energy Storage, CAES/Solar systems, coal-fired fluidized bed combustors for CAES, and two-reservoir advanced CAES concepts. (LCL)