Powered by Deep Web Technologies
Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

A data variance technique for automated despiking of magnetotelluric data with a remote reference  

SciTech Connect (OSTI)

The magnetotelluric method employs co-located surface measurements of electric and magnetic fields to infer the local electrical structure of the earth. The frequency-dependent 'apparent resistivity' curves can be inaccurate at long periods if input data are contaminated - even when robust remote reference techniques are employed. Data despiking prior to processing can result in significantly more reliable estimates of long period apparent resistivities. This paper outlines a two-step method of automatic identification and replacement for spike-like contamination of magnetotelluric data; based on the simultaneity of natural electric and magnetic field variations at distant sites. This simultaneity is exploited both to identify windows in time when the array data are compromised, and to generate synthetic data that replace observed transient noise spikes. In the first step, windows in data time series containing spikes are identified via intersite comparison of channel 'activity' - such as the variance of differenced data within each window. In the second step, plausible data for replacement of flagged windows is calculated by Wiener filtering coincident data in clean channels. The Wiener filters - which express the time-domain relationship between various array channels - are computed using an uncontaminated segment of array training data. Examples are shown where the algorithm is applied to artificially contaminated data, and to real field data. In both cases all spikes are successfully identified. In the case of implanted artificial noise, the synthetic replacement time series are very similar to the original recording. In all cases, apparent resistivity and phase curves obtained by processing the despiked data are much improved over curves obtained from raw data.

Kappler, K.

2011-02-15T23:59:59.000Z

2

PROJECT COMPLETION REPORT MAGNETOTELLURICS -APPLICATION TO RESOURCE  

E-Print Network [OSTI]

/LITHOSPHERE, IMPROVEMENT OF TECHNIQUES OF DATA ACQUISITION AND INTERPRETATION MLP-5103-28 (THN) NATIONAL GEOPHYSICALPROJECT COMPLETION REPORT MAGNETOTELLURICS - APPLICATION TO RESOURCE EXPLORATION, STUDIES OF CRUST;1 PROJECT COMPLETION REPORT Of MAGNETOTELLURICS ­ APPLICATION TO RESOURCE EXPLORATION, STUDIES OF CRUST

Harinarayana, T.

3

Magnetotelluric Techniques | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429Lacey,(MonasterLowell Point,ECO Auger11.Spain: EnergyMagnet Motor Corp

4

Category:Magnetotelluric Techniques | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: EnergyBostonFacilityCascadeJump to:Lists Jump to: navigation,

5

Dismantling techniques  

SciTech Connect (OSTI)

Most of the dismantling techniques used in a Decontamination and Dismantlement (D and D) project are taken from conventional demolition practices. Some modifications to the techniques are made to limit exposure to the workers or to lessen the spread of contamination to the work area. When working on a D and D project, it is best to keep the dismantling techniques and tools as simple as possible. The workers will be more efficient and safer using techniques that are familiar to them. Prior experience with the technique or use of mock-ups is the best way to keep workers safe and to keep the project on schedule.

Wiese, E.

1998-03-13T23:59:59.000Z

6

Magnetotelluric measurements  

SciTech Connect (OSTI)

The ideas of flux quantization and Josephson tunneling are reviewed, and the operation of the dc SQUID as a magnetometer is described. The SQUID currently used for magnetotellurics has a sensitivity of 10/sup -14/ T Hz/sup -1/2/, a dynamic range at 10/sup 7/ in a 1 Hz bandwidth, a frequency response from 0 to 40 kHz, and a slewing rate of 5 x 10/sup -5/T s/sup -1/. Recent improvements in sensitivity are discussed: SQUIDS are rapidly approaching the limit imposed by the uncertainty principle. The essential ideas of magnetotelluric (MT) measurements are outlined, and it is shown how the remote reference method can lead to major reductions in bias errors compared to more conventional schemes. The field techniques of the Berkeley group are described. The practical application of MT requires that amplitude and phase spectra of apparent resistivities be transformed into a geologically useful distribution of subsurface resistivities. In many areas where MT is being applied today, the technique may not provide the information needed because stations are too few and widely spaced, or because we are unable to interpret data influenced by complex 3-D resistivity features. The results of two surveys, one detailed, the other regional, over the Klamath Basin, Oregon, are examined. The detailed survey is able to resolve small (1 km wide) structural features that are missed or add a component of spatial aliasing to the regional data. On the other hand, the regional survey avoids truncation effects that may occur when the survey undersamples an area.

Clarke, J.; Goldstein, N.E.

1980-06-01T23:59:59.000Z

7

Electrochemical Techniques  

SciTech Connect (OSTI)

Sensitive and selective detection techniques are of crucial importance for capillary electrophoresis (CE), microfluidic chips, and other microfluidic systems. Electrochemical detectors have attracted considerable interest for microfluidic systems with features that include high sensitivity, inherent miniaturization of both the detection and control instrumentation, low cost and power demands, and high compatibility with microfabrication technology. The commonly used electrochemical detectors can be classified into three general modes: conductimetry, potentiometry, and amperometry.

Chen, Gang; Lin, Yuehe

2008-07-20T23:59:59.000Z

8

MAGNETOTELLURICS -APPLICATION TO RESOURCE EXPLORATION, STUDIES OF CRUST/LITHOSPHERE,  

E-Print Network [OSTI]

OF TECHNIQUES OF DATA ACQUISITION AND INTERPRETATION NATIONAL GEOPHYSICAL RESEARCH INSTITUTE (COUNCILMAGNETOTELLURICS - APPLICATION TO RESOURCE EXPLORATION, STUDIES OF CRUST/LITHOSPHERE, IMPROVEMENT: NGRI-2009-EXP- MAGNETOTELLURICS ­ APPLICATION TO RESOURCE EXPLORATION, STUDIES OF CRUST / LITHOSPHERE

Harinarayana, T.

9

Magnetotelluric Techniques At Mt Princeton Hot Springs Geothermal Area  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAKGalway Bay(Held & Henderson, 2012) | Open Energy

10

Assessor Training Assessment Techniques  

E-Print Network [OSTI]

NVLAP Assessor Training Assessment Techniques: Communication Skills and Conducting an Assessment listener ·Knowledgeable Assessor Training 2009: Assessment Techniques: Communication Skills & Conducting, truthful, sincere, discrete · Diplomatic · Decisive · Selfreliant Assessor Training 2009: Assessment

11

FTN4 OPTIMIZATION TECHNIQUES.  

E-Print Network [OSTI]

3 1st Edition FTN4 OPTIMIZATION TECHNIQUES November 1979O. INTRODUCTION 1. COt1PILER OPTIMIZATIONS 2. SOURCE CODEcode. Most of these optimizations decrease central processor

Authors, Various

2012-01-01T23:59:59.000Z

12

Contamination Control Techniques  

SciTech Connect (OSTI)

Welcome to a workshop on contamination Control techniques. This work shop is designed for about two hours. Attendee participation is encouraged during the workshop. We will address different topics within contamination control techniques; present processes, products and equipment used here at Hanford and then open the floor to you, the attendees for your input on the topics.

EBY, J.L.

2000-05-16T23:59:59.000Z

13

Child Guidance Techniques.  

E-Print Network [OSTI]

TDOC Z TA24S.7 8873 NO.1314 Child Guidance Techniques The Texas MM University System ~ Texas Agricultural Extension Service DMia! C. Pfannstiel . Director College Station B-1314 ... 2 Contents Helpful Guidance T echniques...

Fraiser, Roberta C.

1982-01-01T23:59:59.000Z

14

Galaxy Redshifts: Improved Techniques  

E-Print Network [OSTI]

This paper analyses the effects of random noise in determining errors and confidence levels for galaxy redshifts obtained by cross-correlation techniques. The main finding is that confidence levels have previously been overestimated, and errors inaccurately calculated in certain applications. New formul\\ae\\ are presented.

A. F. Heavens

1993-05-26T23:59:59.000Z

15

Infrared Inspection Techniques  

E-Print Network [OSTI]

. By means of a TV monitor tube, a thermal picture is formed where lighter parts represent areas with higher temperatures. Absolute temperature levels of objects can be measured with this technique from -300C to +20000C. A conventional camera is attached...

Hill, A. B.; Bevers, D. V.

1979-01-01T23:59:59.000Z

16

FACILITIES INSTRUCTIONS, STANDARDS, & TECHNIQUES  

E-Print Network [OSTI]

to the repair of hydraulic turbine runners and large pump impellers. Reclamation operates and maintains a wideFACILITIES INSTRUCTIONS, STANDARDS, & TECHNIQUES VOLUME 2-5 TURBINE REPAIR Internet Version variety of reaction and impulse turbines as well as axial flow, mixed flow, radial flow pumps and pump

Laughlin, Robert B.

17

Query Optimization Techniques Class Hierarchies  

E-Print Network [OSTI]

Query Optimization Techniques Exploiting Class Hierarchies Sophie Cluet 1 Guido Moerkotte 2 1 INRIA Since the introduction of object base management systems (OBMS), many query optimization techniques tailored for object query languages have been proposed. They adapt known optimization techniques

Mannheim, Universität

18

Resin infiltration transfer technique  

DOE Patents [OSTI]

A process has been developed for fabricating composite structures using either reaction forming or polymer infiltration and pyrolysis techniques to densify the composite matrix. The matrix and reinforcement materials of choice can include, but are not limited to, silicon carbide (SiC) and zirconium carbide (ZrC). The novel process can be used to fabricate complex, net-shape or near-net shape, high-quality ceramic composites with a crack-free matrix.

Miller, David V. (Pittsburgh, PA); Baranwal, Rita (Glenshaw, PA)

2009-12-08T23:59:59.000Z

19

Image compression technique  

DOE Patents [OSTI]

An image is compressed by identifying edge pixels of the image; creating a filled edge array of pixels each of the pixels in the filled edge array which corresponds to an edge pixel having a value equal to the value of a pixel of the image array selected in response to the edge pixel, and each of the pixels in the filled edge array which does not correspond to an edge pixel having a value which is a weighted average of the values of surrounding pixels in the filled edge array which do correspond to edge pixels; and subtracting the filled edge array from the image array to create a difference array. The edge file and the difference array are then separately compressed and transmitted or stored. The original image is later reconstructed by creating a preliminary array in response to the received edge file, and adding the preliminary array to the received difference array. Filling is accomplished by solving Laplace`s equation using a multi-grid technique. Contour and difference file coding techniques also are described. The techniques can be used in a method for processing a plurality of images by selecting a respective compression approach for each image, compressing each of the images according to the compression approach selected, and transmitting each of the images as compressed, in correspondence with an indication of the approach selected for the image. 16 figs.

Fu, C.Y.; Petrich, L.I.

1997-03-25T23:59:59.000Z

20

Continuous profiling of magnetotelluric fields  

SciTech Connect (OSTI)

The magnetotelluric (MT) method of mapping ground electrical conductivity is traditionally based on measurement of the surface impedance at widely spaced stations to infer models of the subsurface through a suitable pseudo 1-D inverse or with linearized least-squares inversion for 2- or 3-D geoelectric media. It is well known that small near-surface inhomogeneities can produce spatial discontinuities in the measured electric fields over a wide frequency range and may consequently bias the impedance on a very local scale. Inadequate station spacing effectively aliases the electric field measurements and results in distortions that cannot be removed in subsequent processing or modelling. In order to fully exploit the benefits of magnetotellurics in complex geological environments, closely spaced measurements must be used routinely. This thesis entertains an analysis of MT data taken along continuous profiles and is a first step that will allow more encompassing 2-D sampling techniques to become viable in the years to come. The developments presented here are to a large extent motivated by the physical insight gained from low-contrast solutions to the forward MT problem. These solutions describe the relationship between a perturbation in the electrical conductivity of the subsurface and the ensuing perturbation of the MT response as the output of a linear system. Albeit strictly accurate in a limited subset of practical exploration problems, the linearized solutions allow one to pursue a model independent study of the response characteristics of MT data. In fact, these solutions yield simple expressions for 1-,2-, and 3-D resistivity models which are here examined in progressive sequence.

Verdin, C.T.

1991-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Applied Science/Techniques  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone by E-mailRadioimmunotherapy ofevolvedApplied Science/Techniques

22

Low Temperature Material Bonding Technique  

DOE Patents [OSTI]

A method of performing a lower temperature bonding technique to bond together two mating pieces of glass includes applying a sodium silicate aqueous solution between the two pieces.

Ramsey, J. Michael (Knoxville, TN); Foote, Robert S. (Oak Ridge, TN)

2000-10-10T23:59:59.000Z

23

Low temperature material bonding technique  

DOE Patents [OSTI]

A method of performing a lower temperature bonding technique to bond together two mating pieces of glass includes applying a sodium silicate aqueous solution between the two pieces.

Ramsey, J. Michael (Knoxville, TN); Foote, Robert S. (Oak Ridge, TN)

2002-02-12T23:59:59.000Z

24

FORENSIC TECHNIQUES FOR CELL PHONES  

E-Print Network [OSTI]

June 2007 FORENSIC TECHNIQUES FOR CELL PHONES FORENSIC TECHNIQUES FOR CELL PHONES Shirley Radack cell phones are widely used for both personal and professional applications, the technology of cell forensics usually do not cover cell phones, especially those with advanced capabilities. The digital

25

Large-scale 3D inversion of marine magnetotelluric data: Case study from the Gemini prospect, Gulf of Mexico  

E-Print Network [OSTI]

of Mexico Michael S. Zhdanov1 , Le Wan1 , Alexander Gribenko1 , Martin Cuma1 , Kerry Key2 , and Steven Constable2 ABSTRACT Three-dimensional magnetotelluric MT inversion is an emerging technique for offshore.g., Constable et al., 1998; Hover- sten et al., 1998 . In addition, the much lower frequency range of MT data

Key, Kerry

26

Intergrating Magnetotellurics, Soil Gas Geochemistry and Structural...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Intergrating Magnetotellurics, Soil Gas Geochemistry and Structural Analysis to Identify Hidden, High Enthalpy, Extensional Geothermal Systems Intergrating Magnetotellurics, Soil...

27

Review : integration of EMI technique with global vibration technique  

E-Print Network [OSTI]

In the last decade, the development of Structural Health Monitoring (SHM) has been skyrocketing because of the serious consequences that come with structural failure. Traditional damage detection techniques, also known as ...

Ni, Suteng

2013-01-01T23:59:59.000Z

28

Experimental techniques and measurement accuracies  

SciTech Connect (OSTI)

A brief description of the experimental tools available for fusion neutronics experiments is given. Attention is paid to error estimates mainly for the measurement of tritium breeding ratio in simulated blankets using various techniques.

Bennett, E.F.; Yule, T.J.; DiIorio, G.; Nakamura, T.; Maekawa, H.

1985-02-01T23:59:59.000Z

29

Review of uranium bioassay techniques  

SciTech Connect (OSTI)

A variety of analytical techniques is available for evaluating uranium in excreta and tissues at levels appropriate for occupational exposure control and evaluation. A few (fluorometry, kinetic phosphorescence analysis, {alpha}-particle spectrometry, neutron irradiation techniques, and inductively-coupled plasma mass spectrometry) have also been demonstrated as capable of determining uranium in these materials at levels comparable to those which occur naturally. Sample preparation requirements and isotopic sensitivities vary widely among these techniques and should be considered carefully when choosing a method. This report discusses analytical techniques used for evaluating uranium in biological matrices (primarily urine) and limits of detection reported in the literature. No cost comparison is attempted, although references are cited which address cost. Techniques discussed include: {alpha}-particle spectrometry; liquid scintillation spectrometry, fluorometry, phosphorometry, neutron activation analysis, fission-track counting, UV-visible absorption spectrophotometry, resonance ionization mass spectrometry, and inductively-coupled plasma mass spectrometry. A summary table of reported limits of detection and of the more important experimental conditions associated with these reported limits is also provided.

Bogard, J.S.

1996-04-01T23:59:59.000Z

30

Erasure Techniques in MRD codes  

E-Print Network [OSTI]

This book is organized into six chapters. The first chapter introduces the basic algebraic structures essential to make this book a self contained one. Algebraic linear codes and their basic properties are discussed in chapter two. In chapter three the authors study the basic properties of erasure decoding in maximum rank distance codes. Some decoding techniques about MRD codes are described and discussed in chapter four of this book. Rank distance codes with complementary duals and MRD codes with complementary duals are introduced and their applications are discussed. Chapter five introduces the notion of integer rank distance codes. The final chapter introduces some concatenation techniques.

W. B. Vasantha Kandasamy; Florentin Smarandache; R. Sujatha; R. S. Raja Durai

2012-05-03T23:59:59.000Z

31

Data Mining: Concepts and Techniques  

E-Print Network [OSTI]

1 Data Mining: Concepts and Techniques (3rd ed.) -- Chapter 3 -- Jiawei Han, Micheline Kamber. All rights reserved. #12;2013/08/12 2 #12;33 Chapter 3: Data Preprocessing n Data Preprocessing: An Overview n Data Quality n Major Tasks in Data Preprocessing n Data Cleaning n Data Integration n Data

Geldenhuys, Jaco

32

Dissertation Imaging as Characterization Techniques  

E-Print Network [OSTI]

Telluride Photovoltaics The goal of increasing the efficiency of solar cell devices is a universal oneDissertation Imaging as Characterization Techniques for Thin-Film Cadmium Telluride Photovoltaics. Increased photovoltaic (PV) performance means an increase in competition with other energy tech- nologies

Sites, James R.

33

Innovative Exploration Techniques for Geothermal Assessment at...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Techniques for Geothermal Assessment at Jemez Pueblo, New Mexico Innovative Exploration Techniques for Geothermal Assessment at Jemez Pueblo, New Mexico Innovative Exploration...

34

Electromagnetic Techniques | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Power Basics (The followingDirectLow CarbonOpen1Model | Exploration Technique:

35

DETECTION OF GEOTHERMAL INTERFERENCE IN THE TUNNEL EXCAVATION USING MAGNETOTELLURICS TECHNIQUE  

E-Print Network [OSTI]

to the geo-engineers in order to devise safety measures suitable during construction of the tunnel of water and rock matrix heats the air in a tunnel that can make the working condition along. Hydropower generation has thus become a major source of power generation, especially in Himalayan region

Harinarayana, T.

36

Downhole Techniques | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address:011-DNA Jump to:52c8ff988c1DeringDolgeville,Massachusetts: EnergyKokamDownhole Techniques

37

Model building techniques for analysis.  

SciTech Connect (OSTI)

The practice of mechanical engineering for product development has evolved into a complex activity that requires a team of specialists for success. Sandia National Laboratories (SNL) has product engineers, mechanical designers, design engineers, manufacturing engineers, mechanical analysts and experimentalists, qualification engineers, and others that contribute through product realization teams to develop new mechanical hardware. The goal of SNL's Design Group is to change product development by enabling design teams to collaborate within a virtual model-based environment whereby analysis is used to guide design decisions. Computer-aided design (CAD) models using PTC's Pro/ENGINEER software tools are heavily relied upon in the product definition stage of parts and assemblies at SNL. The three-dimensional CAD solid model acts as the design solid model that is filled with all of the detailed design definition needed to manufacture the parts. Analysis is an important part of the product development process. The CAD design solid model (DSM) is the foundation for the creation of the analysis solid model (ASM). Creating an ASM from the DSM currently is a time-consuming effort; the turnaround time for results of a design needs to be decreased to have an impact on the overall product development. This effort can be decreased immensely through simple Pro/ENGINEER modeling techniques that summarize to the method features are created in a part model. This document contains recommended modeling techniques that increase the efficiency of the creation of the ASM from the DSM.

Walther, Howard P.; McDaniel, Karen Lynn; Keener, Donald; Cordova, Theresa Elena; Henry, Ronald C.; Brooks, Sean; Martin, Wilbur D.

2009-09-01T23:59:59.000Z

38

Compensation Techniques in Accelerator Physics  

SciTech Connect (OSTI)

Accelerator physics is one of the most diverse multidisciplinary fields of physics, wherein the dynamics of particle beams is studied. It takes more than the understanding of basic electromagnetic interactions to be able to predict the beam dynamics, and to be able to develop new techniques to produce, maintain, and deliver high quality beams for different applications. In this work, some basic theory regarding particle beam dynamics in accelerators will be presented. This basic theory, along with applying state of the art techniques in beam dynamics will be used in this dissertation to study and solve accelerator physics problems. Two problems involving compensation are studied in the context of the MEIC (Medium Energy Electron Ion Collider) project at Jefferson Laboratory. Several chromaticity (the energy dependence of the particle tune) compensation methods are evaluated numerically and deployed in a figure eight ring designed for the electrons in the collider. Furthermore, transverse coupling optics have been developed to compensate the coupling introduced by the spin rotators in the MEIC electron ring design.

Hisham Kamal Sayed

2011-05-31T23:59:59.000Z

39

Subranging technique using superconducting technology  

DOE Patents [OSTI]

Subranging techniques using "digital SQUIDs" are used to design systems with large dynamic range, high resolution and large bandwidth. Analog-to-digital converters (ADCs) embodying the invention include a first SQUID based "coarse" resolution circuit and a second SQUID based "fine" resolution circuit to convert an analog input signal into "coarse" and "fine" digital signals for subsequent processing. In one embodiment, an ADC includes circuitry for supplying an analog input signal to an input coil having at least a first inductive section and a second inductive section. A first superconducting quantum interference device (SQUID) is coupled to the first inductive section and a second SQUID is coupled to the second inductive section. The first SQUID is designed to produce "coarse" (large amplitude, low resolution) output signals and the second SQUID is designed to produce "fine" (low amplitude, high resolution) output signals in response to the analog input signals.

Gupta, Deepnarayan (Hawthorne, NY)

2003-01-01T23:59:59.000Z

40

Modeling techniques for simulating well behavior  

E-Print Network [OSTI]

This thesis is a catalog of modeling techniques useful in simulating well behavior in certain types of reservoirs that are often encountered in petroleum reservoirs. Emphasis has been placed on techniques that can be used with any conventional...

Rattu, Bungen Christina

2002-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

ARPEFS as an analytic technique  

SciTech Connect (OSTI)

Two modifications to the ARPEFS technique are introduced. These are studied using p(2 {times} 2)S/Cu(001) as a model system. The first modification is the obtaining of ARPEFS {chi}(k) curves at temperatures as low as our equipment will permit. While adding to the difficulty of the experiment, this modification is shown to almost double the signal-to-noise ratio of normal emission p(2 {times} 2)S/Cu(001) {chi}(k) curves. This is shown by visual comparison of the raw data and by the improved precision of the extracted structural parameters. The second change is the replacement of manual fitting of the Fourier filtered {chi}(k) curves by the use of the simplex algorithm for parameter determination. Again using p(2 {times} 2)S/Cu(001) data, this is shown to result in better agreement between experimental {chi}(k) curves and curves calculated based on model structures. The improved ARPEFS is then applied to p(2 {times} 2)S/Ni(111) and ({radical}3 {times} {radical}3) R30{degree}S/Ni(111). For p(2 {times} 2)S/Cu(001) we find a S-Cu bond length of 2.26 {Angstrom}, with the S adatom 1.31 {Angstrom} above the fourfold hollow site. The second Cu layer appears to be corrugated. Analysis of the p(2 {times} 2)S/Ni(111) data indicates that the S adatom adatom adsorbs onto the FCC threefold hollow site 1.53 {Angstrom} above the Ni surface. The S-Ni bond length is determined to be 2.13 {Angstrom}, indicating an outwards shift of the first layer Ni atoms. We are unable to assign a unique structure to ({radical}3 {times} {radical}3)R30{degree}S/Ni(111). An analysis of the strengths and weaknesses of ARPEFS as an experimental and analytic technique is presented, along with a summary of problems still to be addressed.

Schach von Wittenau, A.E.

1991-04-01T23:59:59.000Z

42

Best practice techniques for environmental radiological monitoring  

E-Print Network [OSTI]

Best practice techniques for environmental radiological monitoring Science Report ­ SC030308/SR SCHO0407BMNL-E-P #12;ii Science Report Best Practice Techniques for Environmental Radiological #12;iv Science Report Best Practice Techniques for Environmental Radiological Monitoring Executive

43

Stratigraphic statistical curvature analysis techniques  

SciTech Connect (OSTI)

SCAT applies statistical techniques to dipmeter data to identify patterns of bulk curvature, determine transverse and longitudinal structural directions, and reconstruct cross sections and contour maps. STRAT-SCAT applies the same concepts to geometric interpretation of multistoried unimodal, bimodal, or trough-type cross-bedding and also to seismic stratigraphy-scale stratigraphic structures. Structural dip, which comprises the bulk of dipmeter data, is related to beds that (statistically) were deposited with horizontal attitudes; stratigraphic dip is related to beds that were deposited with preferentially oriented nonhorizontal attitudes or to beds that assumed such attitudes because of differential compaction. Stratigraphic dip generates local zones of departure from structural dip on special SCAT plots. The RMS (root-mean-square) of apparent structural dip is greatest in the (structural) T-direction and least in the perpendicular L-direction; the RMS of stratigraphic dip (measured with respect to structural dip) is greatest in the stratigraphic T*-direction and least in the stratigraphic L*-direction. Multistoried, cross-bedding appears on T*-plots as local zones of either greater scatter or statistically significant departure of stratigraphic median dip from structural dip. In contrast, the L*-plot (except for trough-type cross-bedding) is sensitive to cross-bedding. Seismic stratigraphy-scale depositional sequences are identified on Mercator dip versus azimuth plots and polar tangent plots as secondary cylindrical-fold patterns imposed on global structural patterns. Progradational sequences generate local cycloid-type patterns on T*-plots, and compactional sequences generate local cycloid-type patterns on T*-plots, and compactional sequences generate local half-cusp patterns. Both features, however, show only structural dip on L*-plots.

Bengtson, C.A.; Ziagos, J.P.

1987-05-01T23:59:59.000Z

44

VERIFICATION OF A NUMERICAL SIMULATION TECHNIQUE FOR NATURAL CONVECTION  

E-Print Network [OSTI]

on advanced passive cooling techniques. Systems Analysis andand fabrica- tion techniques. Cooling Systems Research. This

Gadgil, A.

2008-01-01T23:59:59.000Z

45

Fundamentals and Techniques of Nonimaging  

SciTech Connect (OSTI)

This is the final report describing a long term basic research program in nonimaging optics that has led to major advances in important areas, including solar energy, fiber optics, illumination techniques, light detectors, and a great many other applications. The term ''nonimaging optics'' refers to the optics of extended sources in systems for which image forming is not important, but effective and efficient collection, concentration, transport, and distribution of light energy is. Although some of the most widely known developments of the early concepts have been in the field of solar energy, a broad variety of other uses have emerged. Most important, under the auspices of this program in fundamental research in nonimaging optics established at the University of Chicago with support from the Office of Basic Energy Sciences at the Department of Energy, the field has become very dynamic, with new ideas and concepts continuing to develop, while applications of the early concepts continue to be pursued. While the subject began as part of classical geometrical optics, it has been extended subsequently to the wave optics domain. Particularly relevant to potential new research directions are recent developments in the formalism of statistical and wave optics, which may be important in understanding energy transport on the nanoscale. Nonimaging optics permits the design of optical systems that achieve the maximum possible concentration allowed by physical conservation laws. The earliest designs were constructed by optimizing the collection of the extreme rays from a source to the desired target: the so-called ''edge-ray'' principle. Later, new concentrator types were generated by placing reflectors along the flow lines of the ''vector flux'' emanating from lambertian emitters in various geometries. A few years ago, a new development occurred with the discovery that making the design edge-ray a functional of some other system parameter permits the construction of whole new classes of devices with greatly expanded capabilities compared to conventional approaches. These ''tailored edge-ray'' designs have dramatically broadened the range of geometries in which nonimaging optics can provide a significant performance improvement. Considerable progress continues to be made in furthering the incorporation of nonimaging secondaries into practical high concentration and ultra-high concentration solar collector systems. In parallel with the continuing development of nonimaging geometrical optics, our group has been working to develop an understanding of certain fundamental physical optics concepts in the same context. In particular, our study of the behavior of classical radiance in nonimaging systems, has revealed some fundamentally important new understandings that we have pursued both theoretically and experimentally. The field is still relatively new and is rapidly gaining widespread recognition because it fuels many industrial applications. Because of this, during the final years of the project, our group at Chicago has been working more closely with a team of industrial scientists from Science Applications International Corporation (SAIC) at first informally, and later more formally, beginning in 1998, under a formal program initiated by the Department of Energy and incrementally funded through this existing grant. This collaboration has been very fruitful and has led to new conceptual breakthroughs which have provided the foundation for further exciting growth. Many of these concepts are described in some detail in the report.

O'Gallagher, J. J.; Winston, R.

2003-07-10T23:59:59.000Z

46

Efficient Algorithmic Techniques for Several Multidimensional ...  

E-Print Network [OSTI]

Politehnica University of Bucharest, Romania, mugurel.andreica@cs.pub.ro. Abstract: In this paper I present several novel, efficient, algorithmic techniques for.

Mugurel

2008-10-23T23:59:59.000Z

47

Eddy current technique for predicting burst pressure  

DOE Patents [OSTI]

A signal processing technique which correlates eddy current inspection data from a tube having a critical tubing defect with a range of predicted burst pressures for the tube is provided. The method can directly correlate the raw eddy current inspection data representing the critical tubing defect with the range of burst pressures using a regression technique, preferably an artificial neural network. Alternatively, the technique deconvolves the raw eddy current inspection data into a set of undistorted signals, each of which represents a separate defect of the tube. The undistorted defect signal which represents the critical tubing defect is related to a range of burst pressures utilizing a regression technique.

Petri, Mark C. (Yorkville, IL); Kupperman, David S. (Oak Park, IL); Morman, James A. (Woodridge, IL); Reifman, Jaques (Western Springs, IL); Wei, Thomas Y. C. (Downers Grove, IL)

2003-01-01T23:59:59.000Z

48

Uncertainty Quantification Techniques for Sensor Calibration...  

Office of Scientific and Technical Information (OSTI)

Uncertainty Quantification Techniques for Sensor Calibration Monitoring in Nuclear Power Plants Re-direct Destination: This report describes research towards the development of...

49

Computer vision techniques for underwater navigation  

E-Print Network [OSTI]

DCS) Chapter 2 Computer Vision . . 2.1 Labeling . . . . 2.2OF CALIFORNIA, SAN DIEGO Computer Vision Techniques fordegree Master of Science in Computer Science by Christopher

Barngrover, Christopher M.

2010-01-01T23:59:59.000Z

50

Uncertainty Quantification Techniques for Sensor Calibration...  

Office of Scientific and Technical Information (OSTI)

Uncertainty Quantification Techniques for Sensor Calibration Monitoring in Nuclear Power Plants Re-direct Destination: Temp Data Fields Ramuhalli, Pradeep; Lin, Guang; Crawford,...

51

Airborne electromagnetic surveys as a reconnaissance technique...  

Open Energy Info (EERE)

Airborne electromagnetic surveys as a reconnaissance technique for geothermal exploration Abstract INPUT airborne electromagnetic (AEM) surveys were conducted during 1979 in five...

52

Optimization Online - Smoothing techniques for solving semidefinite ...  

E-Print Network [OSTI]

Oct 5, 2009 ... Smoothing techniques for solving semidefinite programs with many constraints. Michael B rgisser(michael.buergisser ***at*** ifor.math.ethz.ch)

Michael B rgisser

2009-10-05T23:59:59.000Z

53

Efficient Techniques of ANN-Based Microwave  

E-Print Network [OSTI]

.g., sintering) MW NDE/NDT Technique Where Used W F CW F CW F CW F C WorkshopWorkshopWorkshopWorkshop #12 in closed systems ­ an attractive technology of NDE/NDT capable of serving many practical needs. W F CW F CW of all the proposed techniques: NDE/NDT of objects in closed systems (resonators or waveguides

Yakovlev, Vadim

54

Opto-electrokinetic manipulation technique for highperformance  

SciTech Connect (OSTI)

This communication first demonstrates bio-compatibility of a recently developed opto-electrokinetic manipulation technique, using microorganisms. Aggregation, patterning, translation, trapping and size-based separation of microorganisms performed with the technique firmly establishes its usefulness for development of a high-performance on-chip bioassay system.

Kwon, Jae-Sung [Purdue University; Ravindranath, Sandeep [Purdue University; Kumar, Aloke [ORNL; Irudayaraj, Joseph [Purdue University; Wereley, Steven T. [Purdue University

2012-01-01T23:59:59.000Z

55

Superhydrophobic Materials Technology-PVC Bonding Techniques  

SciTech Connect (OSTI)

The purpose of the technology maturation project was to develop an enhanced application technique for applying diatomaceous earth with pinned polysiloxane oil to PVC pipes and materials. The oil infiltration technique is applied as a spray of diluted oil in a solvent onto the superhydrophobic diatomaceous earth substrate. This makes the surface take on the following characteristics: wet?cleanable anti?biofouling waterproof anti?corrosion. The project involved obtaining input and supplies from VeloxFlow and the development of successful techniques that would quickly result in a commercial license agreement with VeloxFlow and other companies that use PVC materials in a variety of other fields of use.

Hunter, Scott R. [Oak Ridge National Laboratory; Efird, Marty [VeloxFlow, LLC

2013-05-03T23:59:59.000Z

56

274 CEREAL CHEMISTRY ANALYTICAL TECHNIQUES AND INSTRUMENTATION  

E-Print Network [OSTI]

274 CEREAL CHEMISTRY ANALYTICAL TECHNIQUES AND INSTRUMENTATION Evaluation of the Displacement Value). Production of fuel-grade ethanol, initiated in the late 1970's as a result of rising gasoline prices

57

Review of Building Energy Saving Techniques  

E-Print Network [OSTI]

The pace of building energy saving in our country is late, compared with developed countries, and the consumption of building energy is much higher. Therefore, it is imperative to open up new building energy saving techniques and heighten energy use...

Zeng, X.; Zhu, D.

2006-01-01T23:59:59.000Z

58

Internal Benchmarking Outreach and Data Collection Techniques  

Broader source: Energy.gov [DOE]

U.S. Department of Energy (DOE) Technical Assistance Program (TAP) presentation at a TAP webinar held on April 11, 2013 and dealing with internal benchmarking outreach and data collection techniques.

59

Continuous flow separation techniques for microchemical synthesis  

E-Print Network [OSTI]

Performing multistep microchemical synthesis requires many techniques from combining micromixers in series to the development of continuous microfluidic separation tools. Safety, high heat and mass transfer rates, and cost ...

Kralj, Jason G

2006-01-01T23:59:59.000Z

60

A laser speckle based position sensing technique  

E-Print Network [OSTI]

This thesis presents the design and development of a novel laser-speckle-based position sensing technique. In our prototype implementation, a He-Ne laser beam is directed at the surface of an air-bearing spindle. An imaging ...

Shilpiekandula, Vijay, 1979-

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Laser technique detects pollutants in fish  

SciTech Connect (OSTI)

Using a laser and a mass spectrometer, trace pollutants can be detected in fish scales and the time and place of exposure can be determined. The technique has been demonstrated using striped bass from the Clinch and Tennessee rivers.

Krause, C.

1992-01-01T23:59:59.000Z

62

Techniques for green radio cellular communications  

E-Print Network [OSTI]

This thesis proposes four novel techniques to solve the problem of growing energy consumption requirements in cellular communication networks. The first and second part of this work propose a novel energy efficient ...

Videv, Stefan

2013-07-01T23:59:59.000Z

63

ECG Feature Extraction Techniques - A Survey Approach  

E-Print Network [OSTI]

ECG Feature Extraction plays a significant role in diagnosing most of the cardiac diseases. One cardiac cycle in an ECG signal consists of the P-QRS-T waves. This feature extraction scheme determines the amplitudes and intervals in the ECG signal for subsequent analysis. The amplitudes and intervals value of P-QRS-T segment determines the functioning of heart of every human. Recently, numerous research and techniques have been developed for analyzing the ECG signal. The proposed schemes were mostly based on Fuzzy Logic Methods, Artificial Neural Networks (ANN), Genetic Algorithm (GA), Support Vector Machines (SVM), and other Signal Analysis techniques. All these techniques and algorithms have their advantages and limitations. This proposed paper discusses various techniques and transformations proposed earlier in literature for extracting feature from an ECG signal. In addition this paper also provides a comparative study of various methods proposed by researchers in extracting the feature from ECG signal.

Karpagachelvi, S; Sivakumar, M

2010-01-01T23:59:59.000Z

64

The HIT method: A hazard identification technique  

SciTech Connect (OSTI)

This report explains a technique for analyzing systems and operations to identify hazards and needed controls. The HIT method can be used both as a design tool and as a risk analysis tool. As a design tool, this method identifies requirements for design criteria. As part of a risk analysis effort, HIT identifies potential accident sequences that can become part of the safety analysis documentation. Within this report the HIT method is described in detail with emphasis on application of the technique.

Howard, H.H.; Faust, C.L.

1990-01-01T23:59:59.000Z

65

Data Capture Technique for High Speed Signaling  

DOE Patents [OSTI]

A data capture technique for high speed signaling to allow for optimal sampling of an asynchronous data stream. This technique allows for extremely high data rates and does not require that a clock be sent with the data as is done in source synchronous systems. The present invention also provides a hardware mechanism for automatically adjusting transmission delays for optimal two-bit simultaneous bi-directional (SiBiDi) signaling.

Barrett, Wayne Melvin (Rochester, MN); Chen, Dong (Croton On Hudson, NY); Coteus, Paul William (Yorktwon Heights, NY); Gara, Alan Gene (Mount Kisco, NY); Jackson, Rory (Eastchester, NY); Kopcsay, Gerard Vincent (Yorktown Hieghts, NY); Nathanson, Ben Jesse (Teaneck, NY); Vranas, Paylos Michael (Bedford Hills, NY); Takken, Todd E. (Brewster, NY)

2008-08-26T23:59:59.000Z

66

Cascade Training Technique for Particle Identification  

E-Print Network [OSTI]

The cascade training technique which was developed during our work on the MiniBooNE particle identification has been found to be a very efficient way to improve the selection performance, especially when very low background contamination levels are desired. The detailed description of this technique is presented here based on the MiniBooNE detector Monte Carlo simulations, using both artifical neural networks and boosted decision trees as examples.

Yong Liu; Ion Stancu

2006-11-27T23:59:59.000Z

67

Lidar techniques for search and rescue  

SciTech Connect (OSTI)

Four techniques for using LIDAR in Search and Rescue Operations will be discussed. The topic will include laser retroreflection, laser-induced fluorescence in the visible, laser-induced fluorescence during daylight hours, and laser-induced fluorescence in the uv. These techniques use high-repetition rate lasers at a variety of frequencies to induce either fluorescence in dye markers or retroreflection from plastic corner cubes on life preservers and other emergency markers.

Cabral, W.L.

1985-01-01T23:59:59.000Z

68

Review of air flow measurement techniques  

SciTech Connect (OSTI)

Airflow measurement techniques are necessary to determine the most basic of indoor air quality questions: ''Is there enough fresh air to provide a healthy environment for the occupants of the building?'' This paper outlines airflow measurement techniques, but it does not make recommendations for techniques that should be used. The airflows that will be discussed are those within a room or zone, those between rooms or zones, such as through doorways (open or closed) or passive vents, those between the building and outdoors, and those through mechanical air distribution systems. Techniques that are highlighted include particle streak velocimetry, hot wire anemometry, fan pressurization (measuring flow at a given pressure), tracer gas, acoustic methods for leak size determination, the Delta Q test to determine duct leakage flows, and flow hood measurements. Because tracer gas techniques are widely used to measure airflow, this topic is broken down into sections as follows: decay, pulse injection, constant injection, constant concentration, passive sampling, and single and multiple gas measurements for multiple zones.

McWilliams, Jennifer

2002-12-01T23:59:59.000Z

69

Fusion blanket design and optimization techniques.  

SciTech Connect (OSTI)

In fusion reactors, the blanket design and its characteristics have a major impact on the reactor performance, size, and economics. The selection and arrangement of the blanket materials, dimensions of the different blanket zones, and different requirements of the selected materials for a satisfactory performance are the main parameters, which define the blanket performance. These parameters translate to a large number of variables and design constraints, which need to be simultaneously considered in the blanket design process. This represents a major design challenge because of the lack of a comprehensive design tool capable of considering all these variables to define the optimum blanket design and satisfying all the design constraints for the adopted figure of merit and the blanket design criteria. The blanket design techniques of the First Wall/Blanket/Shield Design and Optimization System (BSDOS) have been developed to overcome this difficulty and to provide the state-of-the-art techniques and tools for performing blanket design and analysis. This report describes some of the BSDOS techniques and demonstrates its use. In addition, the use of the optimization technique of the BSDOS can result in a significant blanket performance enhancement and cost saving for the reactor design under consideration. In this report, examples are presented, which utilize an earlier version of the ITER solid breeder blanket design and a high power density self-cooled lithium blanket design for demonstrating some of the BSDOS blanket design techniques.

Gohar, Y.

2005-07-19T23:59:59.000Z

70

Micro-fabrication Techniques for Target Components  

SciTech Connect (OSTI)

Micro-fabrication techniques, derived from the semi-conductor industry, can be used to make a variety of useful mechanical components for targets. A selection of these components including supporting cooling arms for prototype cryogenic inertial confinement fusion targets, stepped and graded density targets for materials dynamics experiments are described. Micro-fabrication enables cost-effective, simultaneous fabrication of multiple high-precision components with complex geometries. Micro-fabrication techniques such as thin-film deposition, photo-lithographic patterning and etch processes normally used in the semi-conductor manufacture industry, can be exploited to make useful mechanical target components. Micro-fabrication processes have in recent years been used to create a number of micro-electro-mechanical systems (MEMS) components such as pressure sensors, accelerometers, ink jet printer heads, microfluidics platforms and the like. These techniques consist primarily of deposition of thin films of material, photo-lithographic patterning and etching processes performed sequentially to produce three dimensional structures using essentially planar processes. While the planar technology can be limiting in terms of the possible geometries of the final product, advantages of using these techniques include the ability to make multiple complex structures simultaneously and cost-effectively. Target components fabricated using these techniques include the supporting cooling arms for cryogenic prototype fusion ignition targets, stepped targets for equation-of-state experiments, and graded density reservoirs for material strength experiments.

Miles, R; Hamilton, J; Crawford, J; Ratti, S; Trevino, J; Graff, T; Stockton, C; Harvey, C

2008-06-10T23:59:59.000Z

71

Advanced crystallization techniques of ''solar grade'' silicon  

SciTech Connect (OSTI)

Microstructural, electrical and photovoltaic characteristics of polycristalline silicon solar cells fabricated with silicon ingots containing 5, 100 and 500 ppmw iron are reported and discussed. All silicon ingots were grown by the directional solidification technique in graphite or special quartz molds and doped intentionally with iron, in order to evaluate the potentiality of the D.S. technique when employed with solar silicon feedstocks. Results indicate that structural breakdown limits the amount of the ingot which is usable for solar cells fabrication, but also that efficiencies in excess of 10% are obtained using the ''good'' region of the ingot.

Gasparini, M.; Alessandri, M.; Calligarich, C.; Pizzini, S.; Rava, P.; Redaelli, F.; Sardi, L.

1982-09-01T23:59:59.000Z

72

Technique for Measuring Hybrid Electronic Component Reliability  

SciTech Connect (OSTI)

Materials compatibility studies of aged, engineered materials and hardware are critical to understanding and predicting component reliability, particularly for systems with extended stockpile life requirements. Nondestructive testing capabilities for component reliability would significantly enhance lifetime predictions. For example, if the detection of crack propagation through a solder joint can be demonstrated, this technique could be used to develop baseline information to statistically determine solder joint lifelengths. This report will investigate high frequency signal response techniques for nondestructively evaluating the electrical behavior of thick film hybrid transmission lines.

Green, C.C.; Hernandez, C.L.; Hosking, F.M.; Robinson, D.; Rutherford, B.; Uribe, F.

1999-01-01T23:59:59.000Z

73

ICAS2002 CONGRESS SIMULATION TECHNIQUES IN HYPERSONIC  

E-Print Network [OSTI]

ICAS2002 CONGRESS SIMULATION TECHNIQUES IN HYPERSONIC AEROTHERMODYNAMICS Vladimir V. Riabov Rivier College, Nashua, New Hampshire 03060, USA Keywords: hypersonic non-equilibrium rarefied-gas flows, aero- & thermodynamic coefficients Abstract Hypersonic viscous flows near simple-shape bodies (wedge, cone, disk, plate

Riabov, Vladimir V.

74

Numerical techniques for lattice gauge theories  

SciTech Connect (OSTI)

The motivation for formulating gauge theories on a lattice is reviewed. Monte Carlo simulation techniques are then discussed for these systems. Finally, the Monte Carlo methods are combined with renormalization group analysis to give strong numerical evidence for confinement of quarks by non-Abelian gauge fields.

Creutz, M.

1981-02-06T23:59:59.000Z

75

Swarming Behavior Using Probabilistic Roadmap Techniques  

E-Print Network [OSTI]

Swarming Behavior Using Probabilistic Roadmap Techniques O. Bur¸chan Bayazit1 , Jyh-Ming Lien2 behaviors: homing, exploring (covering and goal searching), passing through narrow areas and shepherding. We consider several different behaviors: homing, goal searching, covering, passing through narrow passages

Lien, Jyh-Ming

76

Intrusion Detection Techniques in Sensor Aikaterini Mitrokotsa  

E-Print Network [OSTI]

to the network administrator because communication between the access point and the clients is broadcastPDF PROOF Intrusion Detection Techniques in Sensor Networks Aikaterini Mitrokotsa Department Research has been conducted in wired network Intrusion Detection Systems (IDS) for over 25 years. Although

77

A Fast Search Technique for Binary Pulsars  

E-Print Network [OSTI]

I describe a computationally simple, efficient, and sensitive method to search long observations for pulsars in binary systems. The technique looks for orbitally induced sidebands in the power spectrum around a nominal spin frequency, enabling it to detect pulsars in high- or low-mass binaries with short orbital periods (P_orb <~ 5 h).

Scott M. Ransom

1999-11-05T23:59:59.000Z

78

Constraints Techniques for Authoring Multimedia Documents  

E-Print Network [OSTI]

Constraints Techniques for Authoring Multimedia Documents Muriel Jourdan, Ccile Roisin and Laurent://opera.inrialpes.fr/OPERA/ 1 Introduction A multimedia document is defined as a set of objects from different media (text been done for the definition of languages and formats of multimedia documents, largely focusing

Joseph Fourier Grenoble-I, Universit

79

Characterization techniques for surface-micromachined devices  

SciTech Connect (OSTI)

Using a microengine as the primary test vehicle, the authors have examined several aspects of characterization. Parametric measurements provide fabrication process information. Drive signal optimization is necessary for increased microengine performance. Finally, electrical characterization of resonant frequency and quality factor can be more accurate than visual techniques.

Eaton, W.P.; Smith, N.F.; Irwin, L.; Tanner, D.M.

1998-08-01T23:59:59.000Z

80

Mechanical decontamination techniques for floor drain systems  

SciTech Connect (OSTI)

The unprecedented nature of cleanup activities at Three Mile Island Unit 2 (TMI-2) following the 1979 accident has necessitated the development of new techniques to deal with radiation and contamination in the plant. One of these problems was decontamination of floor drain systems, which had become highly contaminated with various forms of dirt and sludge containing high levels of fission products and fuel from the damaged reactor core. The bulk of this contamination is loosely adherent to the drain pipe walls; however, significant amounts of contamination have become incorporated into pipe wall oxide and corrosion layers and embedded in microscopic pits and fissures in the pipe wall material. The need to remove this contamination was recognized early in the TMI-2 cleanup effort. A program consisting of development and laboratory testing of floor drain decontamination techniques was undertaken early in the cleanup with support from the Electric Power Research Institute (EPRI). Based on this initial research, two techniques were judged to show promise for use at TMI-2: a rotating brush hone system and a high-pressure water mole nozzle system. Actual use of these devices to clean floor drains at TMI-2 has yielded mixed decontamination results. The decontamination effectiveness that has been obtained is highly dependent on the nature of the contamination in the drain pipe and the combination of decontamination techniques used.

Palau, G.L.; Saigusa, Moriyuki

1987-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

e! Science News Semiconductor manufacturing technique holds  

E-Print Network [OSTI]

arsenide chips manufactured in multilayer stacks: light sensors, high-speed transistors and solar cellse! Science News Semiconductor manufacturing technique holds promise for solar energy Published semiconductor manufacturing method pioneered at the University of Illinois, the future of solar energy just got

Rogers, John A.

82

Bornholm Web Mining Techniques rup Nielsen  

E-Print Network [OSTI]

Bornholm Web Mining Techniques Finn A ? rup Nielsen Informatics and Mathematical Modelling; Focused crawling #15; Counting links #15; Size of web-sites #15; PostScript/PDF conversion #15; Generation and Giles, 1998). \\[...] no engine indexes more than about 16% of the web" (Lawrence and Giles, 1999). #15

Nielsen, Finn ?rup

83

Machine Learning Techniques for Passive Network Inventory  

E-Print Network [OSTI]

1 Machine Learning Techniques for Passive Network Inventory J´er^ome Franc¸ois, Humberto Abdelnur identify running code, is a powerful service for both security assessment and inventory management operator. Index Terms--fingerprinting, inventory management, syntactic tree, SVM. I. INTRODUCTION ASSUMING

Paris-Sud XI, Université de

84

Spectrum Sensing Techniques in Cognitive Radio Communications  

E-Print Network [OSTI]

1 Spectrum Sensing Techniques in Cognitive Radio Communications Mario Bkassiny*, Yang Li, Georges for CR's. Index Terms-- Cognitive radio, cooperative spectrum sensing, dynamic spectrum access, energy, jayaweera, christos}@ece.unm.edu Abstract-- In this paper, we review some of the recent patents on spectrum

Jayaweera, Sudharman K.

85

PID techniques: Alternatives to RICH Methods  

SciTech Connect (OSTI)

In this review article we discuss the recent progress in PID techniques other than the RICH methods. In particular we mention the recent progress in the Transition Radiation Detector (TRD), dE/dx cluster counting, and Time Of Flight (TOF) techniques. The TRD technique is mature and has been tried in many hadron colliders. It needs space though, about 20cm of detector radial space for every factor of 10 in the {pi}/e rejection power, and this tends to make such detectors large. Although the cluster counting technique is an old idea, it was never tried in a real physics experiment. Recently, there are efforts to revive it for the SuperB experiment using He-based gases and waveform digitizing electronics. A factor of almost 2 improvement, compared to the classical dE/dx performance, is possible in principle. However, the complexity of the data analysis will be substantial. The TOF technique is well established, but introduction of new fast MCP-PMT and G-APD detectors creates new possibilities. It seems that resolutions below 20-30ps may be possible at some point in the future with relatively small systems, and perhaps this could be pushed down to 10-15ps with very small systems, assuming that one can solve many systematic issues. However, the cost, rate limitation, aging and cross-talk in multi-anode devices at high BW are problems. There are several groups working on these issues, so progress is likely. Table 6 summarizes the author's opinion of pros and cons of various detectors presented in this paper based on their operational capabilities. We refer the reader to Ref.40 for discussion of other more general limits from the PID point of view.

Vavra, J.; /SLAC

2011-03-01T23:59:59.000Z

86

michael smith ornlradioactive beams: equipment & techniques recoil separators  

E-Print Network [OSTI]

michael smith ornlradioactive beams: equipment & techniques recoil separators approach! · directly Smith, Rolfs, Barnes NIMA306 (1991) 233 #12;michael smith ornlradioactive beams: equipment & techniques;michael smith ornlradioactive beams: equipment & techniques recoil separators proof of concept with 12C

87

High-Throughput/Combinatorial Techniques in Hydrogen Storage...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

High-ThroughputCombinatorial Techniques in Hydrogen Storage Materials R&D (presentation) High-ThroughputCombinatorial Techniques in Hydrogen Storage Materials R&D (presentation)...

88

High Througput Combinatorial Techniques in Hydrogen Storage Materials...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

High Througput Combinatorial Techniques in Hydrogen Storage Materials R&D Workshop High Througput Combinatorial Techniques in Hydrogen Storage Materials R&D Workshop Summary of the...

89

New ALS Technique Guides IBM in Next-Generation Semiconductor...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

New ALS Technique Guides IBM in Next-Generation Semiconductor Development New ALS Technique Guides IBM in Next-Generation Semiconductor Development Print Wednesday, 21 January 2015...

90

New Mass Spectrometry Techniques for Studying Physical Chemistry...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mass Spectrometry Techniques for Studying Physical Chemistry of Atmospheric Heterogeneous Processes. New Mass Spectrometry Techniques for Studying Physical Chemistry of Atmospheric...

91

advanced measurement techniques: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: Advanced Techniques for the Creation and Propagation of Modules in Cartesian Genetic Programming) advanced techniques for module creation and propagation...

92

USE OF ADVANCED DATA PROCESSING TECHNIQUES IN THE IMAGING OF...  

Open Energy Info (EERE)

data processing methods, which include Optim's proprietary nonlinear velocity optimization technique and pre-stack Kirchhoff migration. The nonlinear optimization technique...

93

ALS Scientists Patent Technique To Dramatically Advance Grating...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ALS Scientists Patent Technique To Dramatically Advance Grating-Based Spectroscopy ALS Scientists Patent Technique To Dramatically Advance Grating-Based Spectroscopy Print Gratings...

94

Active load control techniques for wind turbines.  

SciTech Connect (OSTI)

This report provides an overview on the current state of wind turbine control and introduces a number of active techniques that could be potentially used for control of wind turbine blades. The focus is on research regarding active flow control (AFC) as it applies to wind turbine performance and loads. The techniques and concepts described here are often described as 'smart structures' or 'smart rotor control'. This field is rapidly growing and there are numerous concepts currently being investigated around the world; some concepts already are focused on the wind energy industry and others are intended for use in other fields, but have the potential for wind turbine control. An AFC system can be broken into three categories: controls and sensors, actuators and devices, and the flow phenomena. This report focuses on the research involved with the actuators and devices and the generated flow phenomena caused by each device.

van Dam, C.P. (University of California, Davis, CA); Berg, Dale E.; Johnson, Scott J. (University of California, Davis, CA)

2008-07-01T23:59:59.000Z

95

Modeling techniques for quantum cascade lasers  

E-Print Network [OSTI]

Quantum cascade lasers are unipolar semiconductor lasers covering a wide range of the infrared and terahertz spectrum. Lasing action is achieved by using optical intersubband transitions between quantized states in specifically designed multiple-quantum-well heterostructures. A systematic improvement of quantum cascade lasers with respect to operating temperature, efficiency and spectral range requires detailed modeling of the underlying physical processes in these structures. Moreover, the quantum cascade laser constitutes a versatile model device for the development and improvement of simulation techniques in nano- and optoelectronics. This review provides a comprehensive survey and discussion of the modeling techniques used for the simulation of quantum cascade lasers. The main focus is on the modeling of carrier transport in the nanostructured gain medium, while the simulation of the optical cavity is covered at a more basic level. Specifically, the transfer matrix and finite difference methods for solvin...

Jirauschek, Christian

2014-01-01T23:59:59.000Z

96

Fast Search Techniques for High Energy Pulsars  

E-Print Network [OSTI]

Modified versions of two "standard" pulsar search techniques are presented that allow large-scale searches for pulsations in long duration high-energy data sets using relatively modest amounts of computer time. For small numbers of photons (N_phot <~ 10^4), optimized brute-force epoch folding searches are preferred. For larger numbers of photons, advanced Fourier domain acceleration searches are used. Using these techniques, my collaborators and I have searched Chandra observations of the CasA supernova remnant (SNR) point source and the isolated neutron star RX J1856.5-3754 for pulsations, and confirmed the 65.6 ms pulsar in the 3C 58 SNR during a blind search of archival RXTE data.

Scott M. Ransom

2001-12-01T23:59:59.000Z

97

Nonconvex programming techniques based on functional moments  

E-Print Network [OSTI]

) August 1976 ABSTRACT Nonconvex Programming Techniques Based on Functional Moments. (August 1976) / / / Jacques Hartin, Ingenieur Civil des Telecommunications Chairman of Advisory Committee: Dr. H. 0. Hartley In order to evaluate the maximum f+ of a... "monitoring test" is also provided as to the "adequacy" of an m-th trigonometric expansion. ACKNOWLEDGEMENTS I wish to express my sincerest appreciation and gratitude to Dr. H. 0. Hartley for his patience and understanding during the course...

Martin, Jacques

2012-06-07T23:59:59.000Z

98

A Radiographic Technique With Heavy Ion Microbeams  

SciTech Connect (OSTI)

In this work, we introduce a new technique to perform densitometric and multielemental analysis of samples at the same time using a simple detector with heavy ion micro-beams. It consists in the simultaneous analysis of X-rays induced in the sample and in a secondary target arranged behind the specimen. The X-rays originated in the secondary target are attenuated when crossing the specimen producing a radiographic image with a monochromatic source.

Muscio, J. [ECyT, UNSAM, 1650 San Martin, Buenos Aires (Argentina); Somacal, H.; Burlon, A. A.; Debray, M. E.; Valda, A. A. [ECyT, UNSAM, 1650 San Martin, Buenos Aires (Argentina); U.A. Fisica, Laboratorio TANDAR, CNEA, 1650 San Martin, Buenos Aires (Argentina); Kreiner, A. J. [U.A. Fisica, Laboratorio TANDAR, CNEA, 1650 San Martin, Buenos Aires (Argentina); ECyT, UNSAM, 1650 San Martin, Buenos Aires (Argentina); CONICET (Argentina); Kesque, J. M.; Minsky, D. M. [U.A. Fisica, Laboratorio TANDAR, CNEA, 1650 San Martin, Buenos Aires (Argentina)

2007-02-12T23:59:59.000Z

99

Techniques for remotely sensing watershed runoff potential  

E-Print Network [OSTI]

Techniques for Remotely Sensing Watershed Runoff Potential. (August 1978) Jerry Don Walker, B. S. , Texas ASM University Directed by: Dr. Bruce J. Blanchard The Soil Conservation Service runoff equation is widely used for predicting the watershed runoff... cases, no outflow occurs through the spillway of an overdes1gned structure. Since evaporation losses are high 1n these areas, the salinity of the water stored in the structure gradually increases with time. With insufficient flow through...

Walker, Jerry Don

1978-01-01T23:59:59.000Z

100

Downhole drilling network using burst modulation techniques  

DOE Patents [OSTI]

A downhole drilling system is disclosed in one aspect of the present invention as including a drill string and a transmission line integrated into the drill string. Multiple network nodes are installed at selected intervals along the drill string and are adapted to communicate with one another through the transmission line. In order to efficiently allocate the available bandwidth, the network nodes are configured to use any of numerous burst modulation techniques to transmit data.

Hall; David R. (Provo, UT), Fox; Joe (Spanish Fork, UT)

2007-04-03T23:59:59.000Z

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Compact Optical Technique for Streak Camera Calibration  

SciTech Connect (OSTI)

The National Ignition Facility is under construction at the Lawrence Livermore National Laboratory for the U.S. Department of Energy Stockpile Stewardship Program. Optical streak cameras are an integral part of the experimental diagnostics instrumentation. To accurately reduce data from the streak cameras a temporal calibration is required. This article describes a technique for generating trains of precisely timed short-duration optical pulses that are suitable for temporal calibrations.

Curt Allen; Terence Davies; Frans Janson; Ronald Justin; Bruce Marshall; Oliver Sweningsen; Perry Bell; Roger Griffith; Karla Hagans; Richard Lerche

2004-04-01T23:59:59.000Z

102

Ultrasonic techniques for process monitoring and control.  

SciTech Connect (OSTI)

Ultrasonic techniques have been applied successfully to process monitoring and control for many industries, such as energy, medical, textile, oil, and material. It helps those industries in quality control, energy efficiency improving, waste reducing, and cost saving. This paper presents four ultrasonic systems, ultrasonic viscometer, on-loom, real-time ultrasonic imaging system, ultrasonic leak detection system, and ultrasonic solid concentration monitoring system, developed at Argonne National Laboratory in the past five years for various applications.

Chien, H.-T.

1999-03-24T23:59:59.000Z

103

An analysis of induction motor testing techniques  

SciTech Connect (OSTI)

There are two main failure mechanisms in induction motors: bearing related and stator related. The Electric Power Research Institute (EPRI) conducted a study which was completed in 1985, and found that near 37% of all failures were attributed to stator problems. Another data source for motor failures is the Nuclear Plant Reliability Data System (NPRDS). This database reveals that approximately 55% of all motors were identified as being degraded before failure occurred. Of these, approximately 35% were due to electrical faults. These are the faults which this paper will attempt to identify through testing techniques. This paper is a discussion of the current techniques used to predict incipient failure of induction motors. In the past, the main tests were those to assess the integrity of the ground insulation. However, most insulation failures are believed to involve turn or strand insulation, which makes traditional tests alone inadequate for condition assessment. Furthermore, these tests have several limitations which need consideration when interpreting the results. This paper will concentrate on predictive maintenance techniques which detect electrical problems. It will present appropriate methods and tests, and discuss the strengths and weaknesses of each.

Soergel, S. [Entergy Operations Inc., Killona, LA (United States)

1996-12-31T23:59:59.000Z

104

Technique for fast and efficient hierarchical clustering  

DOE Patents [OSTI]

A fast and efficient technique for hierarchical clustering of samples in a dataset includes compressing the dataset to reduce a number of variables within each of the samples of the dataset. A nearest neighbor matrix is generated to identify nearest neighbor pairs between the samples based on differences between the variables of the samples. The samples are arranged into a hierarchy that groups the samples based on the nearest neighbor matrix. The hierarchy is rendered to a display to graphically illustrate similarities or differences between the samples.

Stork, Christopher

2013-10-08T23:59:59.000Z

105

Project specific selection of decommissioning techniques  

SciTech Connect (OSTI)

Three decommissioning projects with quite different contamination characteristics were terminated with the requested result of freely released rooms for dismantled buildings under supervision of the responsible authorities. The examples show that control areas with different kinds of contamination and different equipment can be decommissioned with reasonable effort. The specific selection of decontamination methods and measurement techniques optimizes the performance of the project and lowers the amount of primary and secondary active waste. The careful planning of radiation protection measures ensures the safe work within the foreseen time schedule.

Christ, B.G.; Wehner, E.L. [NUKEM GmbH, Alzenau (Germany). Nuclear Technology Div.

1993-12-31T23:59:59.000Z

106

Geologic flow characterization using tracer techniques  

SciTech Connect (OSTI)

A new tracer flow-test system has been developed for in situ characterization of geologic formations. This report describes two sets of test equipment: one portable and one for testing in deep formations. Equations are derived for in situ detector calibration, raw data reduction, and flow logging. Data analysis techniques are presented for computing porosity and permeability in unconfined isotropic media, and porosity, permeability and fracture characteristics in media with confined or unconfined two-dimensional flow. The effects of tracer pulse spreading due to divergence, dispersion, and porous formations are also included.

Klett, R. D.; Tyner, C. E.; Hertel, Jr., E. S.

1981-04-01T23:59:59.000Z

107

Category:Electrical Techniques | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: EnergyBostonFacilityCascade SierraStatus Statuspage? ForEZFeedTechniques page?

108

Low energy neutral atom imaging techniques  

SciTech Connect (OSTI)

The potential scientific return from low energy neutral atom (LENA) imaging of the magnetosphere is extraordinary. The technical challenges of LENA detection include (1) removal of LENAs from the tremendous ambient UV without losing information of their incident trajectories, (2) quantification of their trajectories, and (3) obtaining high sensitivity measurements. Two techniques that have been proposed for this purpose are based on fundamentally different atomic interaction mechanisms between LENAs and a solid: LENA transmission through an ultrathin foil and LENA reflection from a solid surface. Both of these methods provide LENA ionization (for subsequent removal from the UV by electrostatic deflection) and secondary electron emission (for start pulse generation for time-of-flight and/or coincidence). We present a comparative study of the transmission and reflection techniques based on differences in atomic interactions with solids and surfaces. We show that transmission methods yield an order of magnitude greater secondary electron emission than reflection methods. Transmission methods are shown to be sufficient for LENA energies of approximately 1 keV to greater than 30 keV. Reflection methods using low work function surfaces could be employed for LENA ionization for energies less than several keV.

Funsten, H.O. McComas, D.J.; Scime, E.E.

1993-01-01T23:59:59.000Z

109

Uncertainty Analysis Technique for OMEGA Dante Measurements  

SciTech Connect (OSTI)

The Dante is an 18 channel X-ray filtered diode array which records the spectrally and temporally resolved radiation flux from various targets (e.g. hohlraums, etc.) at X-ray energies between 50 eV to 10 keV. It is a main diagnostics installed on the OMEGA laser facility at the Laboratory for Laser Energetics, University of Rochester. The absolute flux is determined from the photometric calibration of the X-ray diodes, filters and mirrors and an unfold algorithm. Understanding the errors on this absolute measurement is critical for understanding hohlraum energetic physics. We present a new method for quantifying the uncertainties on the determined flux using a Monte-Carlo parameter variation technique. This technique combines the uncertainties in both the unfold algorithm and the error from the absolute calibration of each channel into a one sigma Gaussian error function. One thousand test voltage sets are created using these error functions and processed by the unfold algorithm to produce individual spectra and fluxes. Statistical methods are applied to the resultant set of fluxes to estimate error bars on the measurements.

May, M J; Widmann, K; Sorce, C; Park, H; Schneider, M

2010-05-07T23:59:59.000Z

110

Physical protection philosophy and techniques in Sweden  

SciTech Connect (OSTI)

The circumstances for the protection of nuclear power plants are special in Sweden. A very important factor is that armed guards at the facilities are alien to the Swedish society. They do not use them. The Swedish concept of physical protection accepts that the aggressor will get into the facility. With this in mind, the Swedish Nuclear Power Inspectorate (SKI) has established the policy that administrative, technical, and organizational measures will be directed toward preventing an aggressor from damaging the reactor, even if he has occupied the facility. In addition, the best conditions possible shall be established for the operator and the police to reoccupy the plant. The author believes this policy is different from that of many other countries. Therefore, he focusses on the Swedish philosophy and techniques for the physical protection of nuclear power plants.

Dufva, B.

1988-01-01T23:59:59.000Z

111

Technique for ship/wake detection  

DOE Patents [OSTI]

An automated ship detection technique includes accessing data associated with an image of a portion of Earth. The data includes reflectance values. A first portion of pixels within the image are masked with a cloud and land mask based on spectral flatness of the reflectance values associated with the pixels. A given pixel selected from the first portion of pixels is unmasked when a threshold number of localized pixels surrounding the given pixel are not masked by the cloud and land mask. A spatial variability image is generated based on spatial derivatives of the reflectance values of the pixels which remain unmasked by the cloud and land mask. The spatial variability image is thresholded to identify one or more regions within the image as possible ship detection regions.

Roskovensky, John K. (Albuquerque, NM)

2012-05-01T23:59:59.000Z

112

Techniques for Intravascular Foreign Body Retrieval  

SciTech Connect (OSTI)

As endovascular therapies increase in frequency, the incidence of lost or embolized foreign bodies is increasing. The presence of an intravascular foreign body (IFB) is well recognized to have the potential to cause serious complications. IFB can embolize and impact critical sites such as the heart, with subsequent significant morbidity or mortality. Intravascular foreign bodies most commonly result from embolized central line fragments, but they can originate from many sources, both iatrogenic and noniatrogenic. The percutaneous approach in removing an IFB is widely perceived as the best way to retrieve endovascular foreign bodies. This minimally invasive approach has a high success rate with a low associated morbidity, and it avoids the complications related to open surgical approaches. We examined the characteristics, causes, and incidence of endovascular embolizations and reviewed the various described techniques that have been used to facilitate subsequent explantation of such materials.

Woodhouse, Joe B.; Uberoi, Raman, E-mail: raman.uberoi@orh.nhs.uk [Oxford University Hospitals (United Kingdom)

2013-08-01T23:59:59.000Z

113

Measurement and characterization techniques for thermoelectric materials  

SciTech Connect (OSTI)

Characterization of thermoelectric materials can pose many problems. A temperature difference can be established across these materials as an electrical current is passed due to the Peltier effect. The thermopower of these materials is quite large and thus large thermal voltages can contribute to many of the measurements necessary to investigate these materials. This paper will discuss the chracterization techniques necessary to investigate these materials and provide an overview of some of the potential systematic errors which can arise. It will also discuss some of the corrections one needs to consider. This should provide an introduction to the characterization and measurement of thermoelectric materials and provide references for a more in depth discussion of the concepts. It should also serve as an indication of the care that must be taken while working with thermoelectric materials.

Tritt, T.M.

1997-07-01T23:59:59.000Z

114

A Comparison of Digital Signal Extraction Techniques  

SciTech Connect (OSTI)

We compare the performance of two methods of digital filtering to detect a radioactive source moving past a gamma-ray sensor. The first method is the box-car filter, which is a standard method used in the detection of a moving radioactive source. The second method is the matched filter, which takes into account the variation in the number of photons absorbed in a gamma-ray sensor as a source moves past the sensor. We optimize both methods to detect a source moving at 5, 10, 15 and 20 mph, and the receiver-operator characteristics of the two techniques are plotted for comparison. The improvement of the matched filter over the box car filter is 27% at 5 mph and 22% at 10 mph for a 90% probability of detection and an average hours between false alarms equal to 10.

Cunningham, M; Dowla, F

2004-12-28T23:59:59.000Z

115

Techniques for determining physical zones of influence  

DOE Patents [OSTI]

Techniques for analyzing flow of a quantity in a given domain are provided. In one aspect, a method for modeling regions in a domain affected by a flow of a quantity is provided which includes the following steps. A physical representation of the domain is provided. A grid that contains a plurality of grid-points in the domain is created. Sources are identified in the domain. Given a vector field that defines a direction of flow of the quantity within the domain, a boundary value problem is defined for each of one or more of the sources identified in the domain. Each of the boundary value problems is solved numerically to obtain a solution for the boundary value problems at each of the grid-points. The boundary problem solutions are post-processed to model the regions affected by the flow of the quantity on the physical representation of the domain.

Hamann, Hendrik F; Lopez-Marrero, Vanessa

2013-11-26T23:59:59.000Z

116

High energy heavy ions: techniques and applications  

SciTech Connect (OSTI)

Pioneering work at the Bevalac has given significant insight into the field of relativistic heavy ions, both in the development of techniques for acceleration and delivery of these beams as well as in many novel areas of applications. This paper will outline our experiences at the Bevalac; ion sources, low velocity acceleration, matching to the synchrotron booster, and beam delivery. Applications discussed will include the observation of new effects in central nuclear collisions, production of beams of exotic short-lived (down to 1 ..mu..sec) isotopes through peripheral nuclear collisions, atomic physics with hydrogen-like uranium ions, effects of heavy ''cosmic rays'' on satellite equipment, and an ongoing cancer radiotherapy program with heavy ions. 39 refs., 6 figs., 1 tab.

Alonso, J.R.

1985-04-01T23:59:59.000Z

117

Artificial Intelligence Techniques for Steam Generator Modelling  

E-Print Network [OSTI]

This paper investigates the use of different Artificial Intelligence methods to predict the values of several continuous variables from a Steam Generator. The objective was to determine how the different artificial intelligence methods performed in making predictions on the given dataset. The artificial intelligence methods evaluated were Neural Networks, Support Vector Machines, and Adaptive Neuro-Fuzzy Inference Systems. The types of neural networks investigated were Multi-Layer Perceptions, and Radial Basis Function. Bayesian and committee techniques were applied to these neural networks. Each of the AI methods considered was simulated in Matlab. The results of the simulations showed that all the AI methods were capable of predicting the Steam Generator data reasonably accurately. However, the Adaptive Neuro-Fuzzy Inference system out performed the other methods in terms of accuracy and ease of implementation, while still achieving a fast execution time as well as a reasonable training time.

Wright, Sarah

2008-01-01T23:59:59.000Z

118

Laboratory testing of closure cap repair techniques  

SciTech Connect (OSTI)

Landfill design requires a low permeability closure cap as well as a low permeability liner. The Savannah River Site, in South Carolina, has approximately 85 acres of mixed waste landfills covered with compacted kaolin clay. Maintaining low permeability of the clay cap requires both that the permeability of the compacted clay itself remain low and that the integrity of the barrier be maintained. Barrier breaches typically result from penetration by roots or animals, and especially cracks caused by uneven settling or desiccation. In this study, clay layers, 0.81 m in diameter and 7.6 cm thick, were compacted in 7 lysimeters to simulate closure caps. The hydraulic conductivity of each layer was measured, and the compacted clay layers (CCL`s) were cracked by drying. Then various repair techniques were applied and the effectiveness of each repair was assessed by remeasuring the hydraulic conductivity. Finally the repaired CCL was again dried and measured to determine how the repair responded to the conditions that caused the original failure. For a full report of this investigation see Persoff et al. Six repair techniques have been tested, four of which involve the use of injectable barrier liquids colloidal silica (CS) and polysiloxane (PSX) described below: (I) covering the crack with a bentonite geosynthetic clay liner (GCL), (ii) recompaction of new kaolinite at STD+3 moisture content joined to existing kaolinite that had dried and shrunk, (iii) direct injection of colloidal silica to a crack, (iv) injection of colloidal silica (CS) to wells in an overlying sand layer, (v) direct injection of polysiloxane to a crack, and (vi), injection of polysiloxane (PSX) to wells in an overlying soil layer.

Persoff, P.; Moridis, G. [Lawrence Berkeley National Lab., CA (United States); Tuck, D.M. [Westinghouse Savannah River Company, Aiken, SC (United States)] [and others

1996-10-01T23:59:59.000Z

119

Gooneratne et al. A Composite Matching Technique A COMPOSITE MATCHING TECHNIQUE FOR SEMANTIC BASED  

E-Print Network [OSTI]

WEB SERVICE DISCOVERY Nalaka Gooneratne 1, Zahir Tari 1 & Gregory Craske 1 1 School of Computer Science and Information Technology, RMIT University ABSTRACT: Current web service composition techniques compose web services based on their functionality. They do not consider user constraints. We propose

Rubinstein, Benjamin

120

5.301 Chemistry Laboratory Techniques, January IAP 2004  

E-Print Network [OSTI]

This course is an intensive introduction to the techniques of experimental chemistry and gives first year students an opportunity to learn and master the basic chemistry lab techniques for carrying out experiments. Students ...

Tabacco, Sarah

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

A Simple Technique for Islanding Detection with Negligible Nondetection Zone  

E-Print Network [OSTI]

Although active islanding detection techniques have smaller nondetection zones than passive techniques, active methods could degrade the system power quality and are not as simple and easy to implement as passive methods. ...

Kirtley Jr, James L.

122

Biophysical modeling of hemodynamic-based neuroimaging techniques  

E-Print Network [OSTI]

Two different hemodynamic-based neuroimaging techniques were studied in this work. Near-Infrared Spectroscopy (NIRS) is a promising technique to measure cerebral hemodynamics in a clinical setting due to its potential for ...

Gagnon, Louis, 1984-

2013-01-01T23:59:59.000Z

123

Survey and evaluation of techniques to augment convective heat transfer  

E-Print Network [OSTI]

This report presents a survey and evaluation of the numerous techniques which have been shown to augment convective heat transfer. These techniques are: surface promoters, including roughness and treatment; displaced ...

Bergles A. E.

1965-01-01T23:59:59.000Z

124

Midcontinent well operators learn advantages of coiled-tubing techniques  

SciTech Connect (OSTI)

From well cleanup to velocity strings to squeeze jobs, more Midcontinent operators are adding coiled-tubing methods to their oilfield techniques. The advantages of these techniques are discussed.

Lyle, D.

1995-07-01T23:59:59.000Z

125

Waveform Relaxation Technique for Longitudinal Partitioning of Transmission Lines  

E-Print Network [OSTI]

Waveform Relaxation Technique for Longitudinal Partitioning of Transmission Lines Martin Gander problem for multiple coupled transmission lines by a so-called transverse partitioning technique. The WR mode transmission line problems. Previous longitudinal partitioning work using the classical WR

Gander, Martin J.

126

Some applications of pipelining techniques in parallel scientific computing  

E-Print Network [OSTI]

In this thesis, we study the applicability of pipelining techniques to the development of parallel algorithms for scientific computation. General principles for pipelining techniques are discussed and two applications, Gram-Schmidt orthogonalization...

Deng, Yuanhua

1996-01-01T23:59:59.000Z

127

Laser-Based Deposition Technique: Patterning Nanoparticles into Microstructures  

E-Print Network [OSTI]

Laser-Based Deposition Technique: Patterning Nanoparticles into Microstructures Edward M. Nadgorny Jaroslaw Drelich Michigan Technological University, Houghton, Michigan, U.S.A. INTRODUCTION The laser- tions of unlike materials, and unconventional substrates. The technique makes use of laser

Drelich, Jaroslaw W.

128

A Computational Study of Feeding Rules and Yield Improvement Techniques  

E-Print Network [OSTI]

A Computational Study of Feeding Rules and Yield Improvement Techniques Christoph Beckermann improvement techniques is presented. The computer simulations were performed using a commercial solidification chills (termed passive methods), and active heating and cooling are presented and compared. The benefits

Beckermann, Christoph

129

Challenge Paper: Validation of Forensic Techniques for Criminal Prosecution  

E-Print Network [OSTI]

Challenge Paper: Validation of Forensic Techniques for Criminal Prosecution Robert F. Erbacher that digital forensics analysts would benefit from the extension, development and application of advanced techniques in performing large scale and heterogeneous data analysis. Modern digital forensics analysis

Erbacher, Robert F.

130

artificial intelligence techniques: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

vs. "Conventional Control" Intelligent Control: Basic Techniques 164 Alan Turing and the development of Artificial Intelligence Computer Technologies and...

131

Benchmarking Outreach and Data Collection Techniques for External Portfolios  

Broader source: Energy.gov [DOE]

This document contains the transcript for the Benchmarking Outreach and Data Collection Techniques webinar, held on April 25, 2013.

132

A Goal-Directed Modeling Technique towards Business Process  

E-Print Network [OSTI]

A Goal-Directed Modeling Technique towards Business Process Yuqun Zhang, Dewayne E. Perry Center--The modeling techniques for business process are mostly graphics-based, that is argued to be simplified when- plore the properties of the business processes under this modeling technique, we define a set of metrics

Perry, Dewayne E.

133

OptimizingResourceUtilizationandTestability Using Hot Potato Techniques  

E-Print Network [OSTI]

OptimizingResourceUtilizationandTestability Using Hot Potato Techniques Miodrag Potkonjak Sujit Dey C&C Research Laboratories, NEC USA, Princeton, NJ 08540 ABSTRACT This paper introduces hot potato reduced using new technique. It is also dem- onstrated how hot potato techniques can be effectively used

Potkonjak, Miodrag

134

Prof.dr. Nico Groenendijk Financing Techniques for  

E-Print Network [OSTI]

Prof.dr. Nico Groenendijk Financing Techniques for Brownfield Regeneration - A practical guide selfguiding trail. REVIT revitalising industrial sites #12;FINANCING TECHNIQUES FOR BROWNFIELD REGENERATION 2006 #12;FINANCING TECHNIQUES FOR BROWNFIELD REGENERATION. A PRACTICAL GUIDE REVIT CCI 2, JUNE 2006 2

Twente, Universiteit

135

Nonlinear regularization techniques for seismic tomography  

SciTech Connect (OSTI)

The effects of several nonlinear regularization techniques are discussed in the framework of 3D seismic tomography. Traditional, linear, l{sub 2} penalties are compared to so-called sparsity promoting l{sub 1} and l{sub 0} penalties, and a total variation penalty. Which of these algorithms is judged optimal depends on the specific requirements of the scientific experiment. If the correct reproduction of model amplitudes is important, classical damping towards a smooth model using an l{sub 2} norm works almost as well as minimizing the total variation but is much more efficient. If gradients (edges of anomalies) should be resolved with a minimum of distortion, we prefer l{sub 1} damping of Daubechies-4 wavelet coefficients. It has the additional advantage of yielding a noiseless reconstruction, contrary to simple l{sub 2} minimization ('Tikhonov regularization') which should be avoided. In some of our examples, the l{sub 0} method produced notable artifacts. In addition we show how nonlinear l{sub 1} methods for finding sparse models can be competitive in speed with the widely used l{sub 2} methods, certainly under noisy conditions, so that there is no need to shun l{sub 1} penalizations.

Loris, I. [Mathematics Department, Vrije Universiteit Brussel, Pleinlaan 2, 1050 Brussels (Belgium)], E-mail: igloris@vub.ac.be; Douma, H. [Department of Geosciences, Princeton University, Guyot Hall, Washington Road, Princeton, NJ 08544 (United States); Nolet, G. [Geosciences Azur, Universite de Nice-Sophia Antipolis, CNRS/IRD, 250 Rue Albert Einstein, Sophia Antipolis 06560 (France); Daubechies, I. [Program in Applied and Computational Mathematics, Princeton University, Fine Hall, Washington Road, Princeton, NJ 08544 (United States); Regone, C. [BP America Inc., 501 Westlake Park Blvd., Houston, TX 77079 (United States)

2010-02-01T23:59:59.000Z

136

Radar transponder apparatus and signal processing technique  

DOE Patents [OSTI]

An active, phase-coded, time-grating transponder and a synthetic-aperture radar (SAR) and signal processor means, in combination, allow the recognition and location of the transponder (tag) in the SAR image and allow communication of information messages from the transponder to the SAR. The SAR is an illuminating radar having special processing modifications in an image-formation processor to receive an echo from a remote transponder, after the transponder receives and retransmits the SAR illuminations, and to enhance the transponder's echo relative to surrounding ground clutter by recognizing special transponder modulations from phase-shifted from the transponder retransmissions. The remote radio-frequency tag also transmits information to the SAR through a single antenna that also serves to receive the SAR illuminations. Unique tag-modulation and SAR signal processing techniques, in combination, allow the detection and precise geographical location of the tag through the reduction of interfering signals from ground clutter, and allow communication of environmental and status information from said tag to be communicated to said SAR.

Axline, Jr., Robert M. (Albuquerque, NM); Sloan, George R. (Albuquerque, NM); Spalding, Richard E. (Albuquerque, NM)

1996-01-01T23:59:59.000Z

137

NDA safeguards techniques for LMFBR assemblies  

SciTech Connect (OSTI)

The significant safeguards concerns for liquid-metal fast breeder reactors (LMFBRs), and for the LMFBR fuel handling systems are the accountability, surveillance, and identification of fuel and blanket assemblies. The introduction of fuel assemblies with a high content of Pu into the receiving and shipping areas of the LMFBR fuel cycle does allow a more direct near-real-time assay profile of the disposition of Pu. Isotope correlations and neutron assay methods have been investigated and implemented for determining plutonium and burnup in fresh and spent LMFBR fuel assemblies. The methods are based on active and passive neutron coincidence counting (NCC) techniques. Preliminary studies on neutron yield rates from the spontaneous fission of plutonium and curium isotopes have indicated that the NCC system is a most effective measure in the verification of nuclear material flow in assembly form for the entire reactor fuel handling cycle, i.e., from the fresh- to the spent-fuel stage. A consequence of the high plutonium concentration level throughout the fuel irradiation period in an LMFBR, is that the spontaneous fission neutron yield from the 242-curium and 244-curium does not dominate the spontaneous fission neutron yield from the plutonium isotopes in the spent fuel stage.

Persiani, P.J.; Gundy, M.L.

1982-08-01T23:59:59.000Z

138

Techniques calm fear of imaging machine  

SciTech Connect (OSTI)

Magnetic resonance imaging has become a valuable tool in diagnosing diseases, and the imaging devices are now used as often as 2 million times a year in the United States. But as many as 10 percent of patients advised to undergo the procedure cannot because they become overwhelmed with claustrophobialike fear triggered by having to lie motionless in the machine's tunnel-like cylinder for about 45 minutes. To counteract this fear, several hospitals now practice various techniques to help reduce the feelings of confinement. One popular method is to give a patient special eyeglasses that allow him to look beyond his feet and see the tunnel opening. Other glasses use mirrors to direct the patient's vision out the back of the unit to large wilderness photographs or murals that simulate a sense of spaciousness. Even a basic item like a set of headphones that plays music can often distract a patient, and technicians frequently hold a patient's hand or foot during the procedure. Another trick is to invite family members and friends to remain with the patient during the scan to provide company and reassurance.

Van Pelt, D.

1990-04-02T23:59:59.000Z

139

ACM Computing Survey, Vol. X, No. X, Article X, Pub. date:. Recent Thermal Management Techniques for  

E-Print Network [OSTI]

/compiler techniques, liquid cooling techniques, and thermal reliability/security. Temperature monitoring include thermal-aware task scheduling and instruction scheduling techniques. Liquid cooling techniques are higher- capacity alternatives to conventional air cooling techniques. Thermal reliability/security issues

Skadron, Kevin

140

A new technique for ultrasonic nondestructive evaluation of adhesive joints  

E-Print Network [OSTI]

the need for nondestructive characterization (NDE) of adhesive layers within a joint. In aerospace adhesives, (typically thermoset resins), determination of wavespeed, and thus modulus, will indicate if resins have been properly cured. Without proper... and will affect bond strength. Therefore, there is a need for techniques for in-situ nondestructive evaluation (NDE) of these two parameters. Although ultrasonic NDE (UNDE) techniques appear to be the most promising techniques for determining the properties...

Hanneman, Susan Elisabeth

2012-06-07T23:59:59.000Z

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Development of decontamination techniques for decommissioning commercial nuclear power plants  

SciTech Connect (OSTI)

NUPEC has been developing various techniques to safely and efficiently decommission large commercial nuclear power plants. The development work, referred to as the verification tests, has been performed since 1982. The verification tests on decontamination techniques have focused on the reduction of both occupational radiation exposure and radioactive waste volume. Experiments on various decontamination methods have been carried out. Prospects of applying efficient decontamination techniques to commercial nuclear power plant decommissioning are bright due to the experimental results.

Ishikura, T.; Miwa, T.; Onozawa, T.; Ohtsuka, H. [Nuclear Power Engineering Corp., Tokyo (Japan). Plant and Components Dept.; Ishigure, K. [Univ. of Tokyo (Japan). Dept. of Quantum Engineering and System Science

1993-12-31T23:59:59.000Z

142

Boosting the Next Wave of Accelerators: New Technique Speeds...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Boosting Accelerator Design Boosting the Next Wave of Accelerators New Technique Speeds Simulations by up to a Million-fold March 29, 2011 | Tags: Franklin, Nuclear Physics (NP)...

143

NNSA implements nondestructive gas sampling technique for nuclear...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

implements ... NNSA implements nondestructive gas sampling technique for nuclear weapon components Posted: June 12, 2012 - 1:34pm The National Nuclear Security Administration...

144

A Distinction Technique Between Volcanic And Tectonic Depression...  

Open Energy Info (EERE)

propose a numerical modeling technique which restores the gravity anomaly of tectonic origin and identifies the gravity low of caldera origin. The identification is performed just...

145

Neutron Imaging Explored as Complementary Technique for Improving...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Neutron Imaging Explored as Complementary Technique for Improving Cancer Detection August 05, 2013 Researcher Maria Cekanova analyzes the neutron radiographs of a canine breast...

146

ALS Technique Gives Novel View of Lithium Battery Dendrite Growth  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ALS Technique Gives Novel View of Lithium Battery Dendrite Growth Print Lithium-ion batteries, popular in today's electronic devices and electric vehicles, could gain significant...

147

activation analysis technique: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: Geography 478 Techniques of Remote Sensing Image Analysis (Earth Observation System Science) Dr of Remote Sensing Image Analysis (Earth Observation System Science) Remote...

148

activation analysis techniques: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: Geography 478 Techniques of Remote Sensing Image Analysis (Earth Observation System Science) Dr of Remote Sensing Image Analysis (Earth Observation System Science) Remote...

149

Impact of External Heat-shielding Techniques on Shell Surface...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

External Heat-shielding Techniques on Shell Surface Temperatures and Dynamic Shell Thermal Deformation of Diesel Engine Emission Control Systems Impact of External Heat-shielding...

150

E-Print Network 3.0 - astrophysics preconditioning techniques...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

preconditioning techniques Page: << < 1 2 3 4 5 > >> 1 Please note that only the German version of the Curriculum is legally binding. All other linguistic versions are...

151

Use of Geophysical Techniques to Characterize Fluid Flow in a...  

Broader source: Energy.gov (indexed) [DOE]

to Geothermal Prospecting Joint inversion of electrical and seismic data for Fracture char. and Imaging of Fluid Flow in Geothermal Systems Use of Geophysical Techniques...

152

Use of Geophysical Techniques to Characterize Fluid Flow in a...  

Broader source: Energy.gov (indexed) [DOE]

and test combined geophysical techniques to characterize fluid flow, in relation to fracture orientations and fault distributions in a geothermal system. Average Overall Score:...

153

Los Alamos develops new technique for growing high-efficiency...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Growing high-efficiency perovskite solar cells Los Alamos develops new technique for growing high-efficiency perovskite solar cells Researchers reveal a new solution-based...

154

WATERJETTING: A NEW DRILLING TECHNIQUE IN COALBED METHANE RESERVOIRS.  

E-Print Network [OSTI]

??WATERJETTING: A NEW DRILLING TECHNIQUE IN COALBED METHANE RESERVOIRS Applications of waterjeting to drill horizontal wells for the purpose of degassing coalbeds prior to mining (more)

Funmilayo, Gbenga M.

2010-01-01T23:59:59.000Z

155

advanced melanoma technique: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

rendering architectures and APIs. David Blythe; David Blythe; David Blythe 1999-01-01 68 Smart surface interrogation for advanced visualization techniques Helwig Lo elmann, Thomas...

156

Electric Vehicle Battery Thermal Issues and Thermal Management Techniques (Presentation)  

SciTech Connect (OSTI)

This presentation examines the issues concerning thermal management in electric drive vehicles and management techniques for improving the life of a Li-ion battery in an EDV.

Rugh, J. P.; Pesaran, A.; Smith, K.

2013-07-01T23:59:59.000Z

157

alternative fabrication techniques: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in terms of functional and nonfunctional requirements. Vasilescu, Rares 2009-01-01 11 Alternative techniques for beam halo measurements CERN Preprints Summary: In future high...

158

Novel NDE techniques in the power generation industry.  

E-Print Network [OSTI]

??The thesis presented here comprises the work undertaken for research into novel NDE techniques in the power generation industry. This has been undertaken as part (more)

Ward, Christopher M. S.

2010-01-01T23:59:59.000Z

159

array processing techniques: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

telescope arrays MIT - DSpace Summary: Measurement and analysis of redshifted 21cm hydrogen emissions is a developing technique for studying the early universe. The primary time...

160

Performance analysis of interference suppression techniques for multiple antenna systems  

E-Print Network [OSTI]

Pre-BLAST-DFE Technique for MISO Channels with DecentralizedPrecoding Operating over MISO Frequency Selec- tive Fadingon a Nonlinear Precoder for MISO Channels with Decentralized

Amihood, Patrick

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

ai techniques pra: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Last Page Topic Index 1 AI Programming Techniques Lab 3: Second order programming Computer Technologies and Information Sciences Websites Summary: G52APT AI Programming...

162

Novel update techniques for the revised simplex method  

E-Print Network [OSTI]

Jan 28, 2013 ... high performance computing techniques for the simplex method [13,17]. Qi Huangfu J. A. Julian Hall. School of Mathematics, University of...

2013-02-14T23:59:59.000Z

163

Parallel Large-Neighborhood Search Techniques for LNG Inventory ...  

E-Print Network [OSTI]

Apr 17, 2014 ... Parallel Large-Neighborhood Search Techniques for LNG Inventory Routing. Badrinarayanan Velamur Asokan(badri.velamur.asokan ***at***...

Badrinarayanan Velamur Asokan

2014-04-17T23:59:59.000Z

164

Hybrid opto-electric techniques for molecular diagnostics  

SciTech Connect (OSTI)

Hybrid optoelectric techniques reflect a new paradigm in microfluidics. In essence, these are microfluidic techniques that employ a synergistic combination of optical and electrical forces to enable noninvasive manipulation of fluids and/or particle-type entities at the micro/nano-scale [1]. Synergy between optical and electrical forces bestows these techniques with several unique features that are promising to bring new opportunities in molecular diagnostics. Within the scope of molecular diagnostics, several aspects of optoelectric techniques promise to play a relevant role. These include, but are not limited to, sample preparation, sorting, purification, amplification and detection.

Haque, Aeraj Ul [Argonne National Laboratory (ANL)

2012-01-01T23:59:59.000Z

165

Optimization Online - Large-Scale Linear Programming Techniques ...  

E-Print Network [OSTI]

Feb 12, 2002 ... Large-Scale Linear Programming Techniques for the Design of Protein Folding Potentials. Michael Wagner (mwagner ***at*** odu.edu)

Michael Wagner

2002-02-12T23:59:59.000Z

166

acoustic emission techniques: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

methods such as acoustic emission as a global method associated to a local method such as TOFD technique which permits an accurate characterization and precise sizing of flaw...

167

acoustic emission technique: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

methods such as acoustic emission as a global method associated to a local method such as TOFD technique which permits an accurate characterization and precise sizing of flaw...

168

Fabrication of asymmetrically coated colloid particles by microcontact printing techniques  

E-Print Network [OSTI]

Janus particles,4 non-spherical shaped ``acorn'' particles5,6 and unsymmetrical 3D macromoleculesFabrication of asymmetrically coated colloid particles by microcontact printing techniques Olivier particles by using a microcontact printing technique. Films of water-insoluble ionic surfactants deposited

Velev, Orlin D.

169

NISTIR 7078 TIN Techniques for Data Analysis and Surface Construction  

E-Print Network [OSTI]

NISTIR 7078 TIN Techniques for Data Analysis and Surface Construction Building and Fire Research Institute of Standards and Technology #12;NISTIR 7078 TIN Techniques for Data Analysis and Surface This report addresses the task of meshing point clouds by triangulated elevated surfaces referred to as TIN

Bernal, Javier

170

Advantages and Limitations of the RICH Technique for Particle Identification  

SciTech Connect (OSTI)

The ring imaging Cherenkov (RICH) technique for hadronic particle identification (PID) is described. The advantages and limitations of RICH PID counters are compared with those of other classic PID techniques, such as threshold Cherenkov counters, ionization loss (dE/dx) in tracking devices, and time of flight (TOF) detectors.

Ratcliff, Blair N.; /SLAC

2011-11-07T23:59:59.000Z

171

Madonne: Document Image Analysis Techniques for Cultural Heritage Documents  

E-Print Network [OSTI]

Madonne: Document Image Analysis Techniques for Cultural Heritage Documents Jean-Marc Ogier and Karl Tombre Abstract. This paper presents the Madonne project, a French initiative to use document image anal- ysis techniques for the purpose of preserving and exploiting heritage documents. 1

Boyer, Edmond

172

An Introduction to Computational Intelligence Techniques for Robot Control  

E-Print Network [OSTI]

: The application of computational intelligence techniques to the field of industrial robot control is discussed involved, with particular reference to existing applications of these techniques in industrial robotics in real time to update that model. Often, particularly for industrial robots, the model is used off

Bullinaria, John

173

Author Retrospective for Energy Conservation Techniques for Disk  

E-Print Network [OSTI]

Author Retrospective for Energy Conservation Techniques for Disk Array-based Servers Eduardo original paper ti- tled "Energy Conservation Techniques for Disk Array-based Servers", which was published.1145/2591635.2591666 Categories and Subject Descriptors D.4 [Operating systems]: Storage management Keywords Energy conservation

Bianchini, Ricardo

174

Evaluation of Reorientation Techniques for Walking in Large Virtual Environments  

E-Print Network [OSTI]

Interfaces and Presentation]: Multimedia Information Systems--Artificial, augmented, and vir- tual realities lab space. Techniques proposed to lift this size constraint, enabling real walking in VEs of the tracked lab space. Techniques have been proposed to lift this size constraint, enabling real walking

North Carolina at Chapel Hill, University of

175

REAL-TIME NON-PHOTOREALISTIC RENDERING TECHNIQUES  

E-Print Network [OSTI]

REAL-TIME NON-PHOTOREALISTIC RENDERING TECHNIQUES FOR ILLUSTRATING 3D SCENES AND THEIR DYNAMICS This thesis addresses real-time non-photorealistic rendering techniques and their applications in interactive visualization. Real-time rendering has emerged as an important discipline within computer graphics developing

Weske, Mathias

176

Panel Damping Loss Factor Estimation Using The Random Decrement Technique  

E-Print Network [OSTI]

The use of the Random Decrement Technique (RDT) for estimating panel damping loss factors ranging from 1% to 10% is examined in a systematic way, with a focus on establishing the various parameters one must specify to use the technique to the best...

Dande, Himanshu Amol

2010-12-10T23:59:59.000Z

177

A COMPARISON OF ATMS AND CSP TECHNIQUES Johan de Kleer  

E-Print Network [OSTI]

A COMPARISON OF ATMS AND CSP TECHNIQUES Johan de Kleer Xerox Palo Alto Research ~Jenter 3333 Coyote (CSP) techniques which evolved from vision tasks and assumption- based truth maintenance system (ATMS. This paper demonstrates that the intuitions underlying these refinements are essentially similar

de Kleer, Johan

178

Weld: A Multithreading Technique Towards Latency-tolerant VLIW Processors  

E-Print Network [OSTI]

Weld: A Multithreading Technique Towards Latency- tolerant VLIW Processors Emre ?zer, Thomas M architecture model, named Weld, for VLIW processors. Weld integrates multithreading support into a VLIW a novel hardware technique called operation welding that merges operations from different threads

Conte, Thomas M.

179

Special Section Guest Editorial Coherent Raman Imaging Techniques and Biomedical  

E-Print Network [OSTI]

Special Section Guest Editorial Coherent Raman Imaging Techniques and Biomedical Applications. The combination of high resolution and molecular contrast has moved Raman techniques into the biomedical spotlight on biomedical imag- ing. The spontaneous Raman interaction is weak, yielding insufficient photons for fast

Potma, Eric Olaf

180

Explorations of Space-Charge Limits in Parallel-Plate Diodes and Associated Techniques for Automation  

E-Print Network [OSTI]

and Associated Techniques for Automation by Benjamin Ragan-and Associated Techniques for Automation Copyright 2013 byand Associated Techniques for Automation by Benjamin Ragan-

Ragan-Kelley, Benjamin

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

June 27, 2003 Visualization Techniques for Personal Tasks on Mobile Computers Page 1 Visualization Techniques for Personal  

E-Print Network [OSTI]

aspects of personal task data Temporal aspects: when tasks have to be performed Spatial aspects: whereJune 27, 2003 Visualization Techniques for Personal Tasks on Mobile Computers Page 1 Visualization Techniques for Personal Tasks on Mobile Computers Gerald Bieber Fraunhofer Institute for Computer Graphics

Tominski, Christian

182

CIS 277 Introduction to Computer Graphics Techniques Course Number & Title (A.1) CIS 277 Introduction to Computer Graphics Techniques  

E-Print Network [OSTI]

CIS 277 Introduction to Computer Graphics Techniques Course Number & Title (A.1) CIS 277 Introduction to Computer Graphics Techniques Credit Units (A.2) 1 CU (3 hours of lecture per week) Instructor(s)/Required Materials (A.4) Interactive Computer Graphics, by Edward Angel, 5th Edition, Addison-Wesley, 2009. Course

Plotkin, Joshua B.

183

Application of linear programming redispatch technique to dynamic generation allocation  

SciTech Connect (OSTI)

This paper considers dispatch problems that involve the allocation of system generation optimally among generating units while tracking a load curve and observing power rate limits of the units, system spinning reserve requirements and other security constraints. Two methods are used in the solution of the problem. The first method is quadratic programming technique combined with a linear programming redispatch technique. The latter utilizes a linear programming formulation of the dynamic dispatch problem about the base case static economic dispatch solution. Tests and computer results on 4 systems of different combinations of units and intervals are given to show the advantages of the techniques proposed.

Somuah, C.B. (Dept. of Electrical Engr., KFUPM, Dhahran 31261 (SA)); Khunaizi, N. (Saudi Consolidated Electric Co., In the Eastern Province, Dammam (SA))

1990-02-01T23:59:59.000Z

184

A Novel Technique for Inferior Vena Cava Filter Extraction  

SciTech Connect (OSTI)

Inferior vena cava (IVC) filters are used to protect against pulmonary embolism in high-risk patients. Whilst the insertion of retrievable IVC filters is gaining popularity, a proportion of such devices cannot be removed using standard techniques. We describe a novel approach for IVC filter removal that involves snaring the filter superiorly along with the use of flexible forceps or laser devices to dissect the filter struts from the caval wall. This technique has used to successfully treat three patients without complications in whom standard techniques failed.

Johnston, Edward William, E-mail: ed.johnston@doctors.org.uk; Rowe, Luke Michael Morgan; Brookes, Jocelyn; Raja, Jowad; Hague, Julian, E-mail: julian.hague@uclh.nhs.uk [University College Hospital, Multidisciplinary Endovascular Team (United Kingdom)

2013-05-02T23:59:59.000Z

185

Nondestructive Technique Survey for Assessing Integrity of Composite Firing Vessel  

SciTech Connect (OSTI)

The repeated use and limited lifetime of a composite tiring vessel compel a need to survey techniques for monitoring the structural integrity of the vessel in order to determine when it should be retired. Various nondestructive techniques were researched and evaluated based on their applicability to the vessel. The methods were visual inspection, liquid penetrant testing, magnetic particle testing, surface mounted strain gauges, thermal inspection, acoustic emission, ultrasonic testing, radiography, eddy current testing, and embedded fiber optic sensors. It was determined that embedded fiber optic sensor is the most promising technique due to their ability to be embedded within layers of composites and their immunity to electromagnetic interference.

Tran, A.

2000-08-01T23:59:59.000Z

186

Lightweight and Statistical Techniques for Petascale PetaScale Debugging  

SciTech Connect (OSTI)

This project investigated novel techniques for debugging scientific applications on petascale architectures. In particular, we developed lightweight tools that narrow the problem space when bugs are encountered. We also developed techniques that either limit the number of tasks and the code regions to which a developer must apply a traditional debugger or that apply statistical techniques to provide direct suggestions of the location and type of error. We extend previous work on the Stack Trace Analysis Tool (STAT), that has already demonstrated scalability to over one hundred thousand MPI tasks. We also extended statistical techniques developed to isolate programming errors in widely used sequential or threaded applications in the Cooperative Bug Isolation (CBI) project to large scale parallel applications. Overall, our research substantially improved productivity on petascale platforms through a tool set for debugging that complements existing commercial tools. Previously, Office Of Science application developers relied either on primitive manual debugging techniques based on printf or they use tools, such as TotalView, that do not scale beyond a few thousand processors. However, bugs often arise at scale and substantial effort and computation cycles are wasted in either reproducing the problem in a smaller run that can be analyzed with the traditional tools or in repeated runs at scale that use the primitive techniques. New techniques that work at scale and automate the process of identifying the root cause of errors were needed. These techniques significantly reduced the time spent debugging petascale applications, thus leading to a greater overall amount of time for application scientists to pursue the scientific objectives for which the systems are purchased. We developed a new paradigm for debugging at scale: techniques that reduced the debugging scenario to a scale suitable for traditional debuggers, e.g., by narrowing the search for the root-cause analysis to a small set of nodes or by identifying equivalence classes of nodes and sampling our debug targets from them. We implemented these techniques as lightweight tools that efficiently work on the full scale of the target machine. We explored four lightweight debugging refinements: generic classification parameters, such as stack traces, application-specific classification parameters, such as global variables, statistical data acquisition techniques and machine learning based approaches to perform root cause analysis. Work done under this project can be divided into two categories, new algorithms and techniques for scalable debugging, and foundation infrastructure work on our MRNet multicast-reduction framework for scalability, and Dyninst binary analysis and instrumentation toolkits.

Miller, Barton

2014-06-30T23:59:59.000Z

187

Heat Transfer and Cooling Techniques at Low Temperature  

E-Print Network [OSTI]

The first part of this chapter gives an introduction to heat transfer and cooling techniques at low temperature. We review the fundamental laws of heat transfer (conduction, convection and radiation) and give useful data specific to cryogenic conditions (thermal contact resistance, total emissivity of materials and heat transfer correlation in forced or boiling flow for example) used in the design of cooling systems. In the second part, we review the main cooling techniques at low temperature, with or without cryogen, from the simplest ones (bath cooling) to the ones involving the use of cryocoolers without forgetting the cooling flow techniques.

Baudouy, B

2014-01-01T23:59:59.000Z

188

APPLICATION OF DATA ANALYSIS TECHNIQUES TO NUCLEAR REACTOR  

E-Print Network [OSTI]

1 APPLICATION OF DATA ANALYSIS TECHNIQUES TO NUCLEAR REACTOR SYSTEMS CODE ACCURACY ASSESSMENT) has been developed by the authors to provide quantitative comparisons between nuclear reactor systems. 1. INTRODUCTION In recent years, the commercial nuclear reactor industry has focused significant

Kunz, Robert Francis

189

Nonlinear stochastic system identification techniques for biological tissues/  

E-Print Network [OSTI]

This research develops a device capable of measuring the nonlinear dynamic mechanical properties of human tissue in vivo. The enabling technology is the use of nonlinear stochastic system identification techniques in ...

Chen, Yi, S.M. Massachusetts Institute of Technology

2010-01-01T23:59:59.000Z

190

Low Power Filtering Techniques for Wideband and Wireless Applications  

E-Print Network [OSTI]

This dissertation presents design and implementation of continuous time analog filters for two specific applications: wideband analog systems such as disk drive channel and low-power wireless applications. Specific focus has been techniques...

Gambhir, Manisha

2010-10-12T23:59:59.000Z

191

Digital neural network-based modeling technique for extrusion processes  

E-Print Network [OSTI]

and market conditions. In order to develop reliable and well-performing advanced process monitoring and diagnostic systems for achieving improved product quality and cost-effective operation, the neural network-based modeling technique for the extrusion...

Jang, Won-Hyouk

2001-01-01T23:59:59.000Z

192

EXPERIMENTAL IDENTIFICATION OF COHESIVE ZONE MODELS FROM THERMOMECHANICAL IMAGING TECHNIQUES  

E-Print Network [OSTI]

1 EXPERIMENTAL IDENTIFICATION OF COHESIVE ZONE MODELS FROM THERMOMECHANICAL IMAGING TECHNIQUES S]. Although CZMs are becoming increasingly powerful, the identification of these models still remains of the ductile material into a purely elastoplastic behaviour related to the bulk response (hardening

Paris-Sud XI, Université de

193

Experimental Analysis of Two Measurement Techniques to Characterize Photodiode Linearity  

E-Print Network [OSTI]

Experimental Analysis of Two Measurement Techniques to Characterize Photodiode Linearity Anand anand@ece.ucsb.edu Abstract--As photodiodes become more linear, accurately characterizing, the limitations of the measurement system in determining the distortion of highly linear photodiodes. I

Coldren, Larry A.

194

High-Throughput/Combinatorial Techniques in Hydrogen Storage...  

Broader source: Energy.gov (indexed) [DOE]

ThroughputCombinatorial Techniques in Hydrogen Storage Materials R&D Ned Stetson, Larry Blair 1 , Grace Ordaz, Carole Read, George Thomas 2 , and Sunita Satyapal Suite 900, 7475...

195

Surface space : digital manufacturing techniques and emergent building material  

E-Print Network [OSTI]

This thesis explores tectonic possibilities of new material and forming techniques. The design process is catalyzed by experimenting different configurations of the material.This project attempts to develop inventive ways ...

Ho, Joseph Chi-Chen, 1975-

2002-01-01T23:59:59.000Z

196

Cavitation methods in therapeutic ultrasound : techniques, mechanisms, and system design  

E-Print Network [OSTI]

Focused ultrasound is currently being developed as a non-invasive thermal ablation technique for benign and cancerous tumors in several organ systems. Although these therapies are designed to ablate tissue purely by thermal ...

Sokka, Shunmugavelu D. (Shunmugavelu Doraivelu), 1975-

2004-01-01T23:59:59.000Z

197

Hierarchical multi-touch selection techniques for collaborative geospatial analysis  

E-Print Network [OSTI]

Hierarchical multi-touch selection techniques for collaborative geospatial analysis Thomas and military use. Keywords: Multi-touch, hierarchical selection, geospatial analysis, GIS, collaborative selection of complex regions-of-interest within a hierarchical geospatial environment, as well as methods

Wartell, Zachary

198

ISpace: Interactive Volume Data Classification Techniques Using Independent Component Analysis  

E-Print Network [OSTI]

, multivariate data analysis, multimodality data, scientific visualization, seg- mentation, volume rendering 1ISpace: Interactive Volume Data Classification Techniques Using Independent Component Analysis, which uses Independent Component Analysis (ICA) and a multi- dimensional histogram of the volume data

Ma, Kwan-Liu

199

C++ programming techniques for High Performance Computing on systems with  

E-Print Network [OSTI]

C++ programming techniques for High Performance Computing on systems with non-uniform memory access (including NUMA) without sacrificing performance. ccNUMA In High Performance Computing (HPC), shared- memory

Fiebig, Peter

200

High Througput Combinatorial Techniques in Hydrogen Storage Materials...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and surface area measurements (high-throughput techniques need development). 5. Aerogels Page 2 of 5 Synthesis is based on standard sol-gel processes and should be similar to...

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Evaluation of a statistical infill candidate selection technique  

E-Print Network [OSTI]

sets, then compared the moving-window infill-well predictions to those from reservoir simulation. Results indicate that moving-window infill predictions for individual wells can be off by more than 50%; however, the technique accurately predicts...

Guan, Linhua

2004-09-30T23:59:59.000Z

202

Stabilized Ultrafast Pulse Generation and Optical Frequency Combs Techniques  

E-Print Network [OSTI]

Stabilized Ultrafast Pulse Generation and Optical Frequency Combs ­ Techniques and Applications Diodes ­ Review Ultrafast Dynamics ­ Breathing Mode (Dispersion Managed Cavity) · High Pulse Energy to Make Short Pulses - Review Ultrafast Dynamics- - Dispersion Managed (Breathing Mode) MLL #12

Van Stryland, Eric

203

Advisory Group On The Application Of Nuclear Techniques To Geothermal...  

Open Energy Info (EERE)

On The Application Of Nuclear Techniques To Geothermal Studies-Meeting In Pisa 8-12 Sep 1975 Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article:...

204

Bureau of Land Management - Techniques for Documenting a No Action...  

Open Energy Info (EERE)

for Documenting a No Action Alternative in an EA Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Bureau of Land Management - Techniques for Documenting...

205

Robust techniques for developing empirical models of fluidized bed combustors  

E-Print Network [OSTI]

This report is designed to provide a review of those data analysis techniques that are most useful for fitting m-dimensional empirical surfaces to very large sets of data. One issue explored is the improvement

Gruhl, Jim

206

Development of the Passive Cooling Technique in China  

E-Print Network [OSTI]

With more and more energy and environmental issues, the energy-saving and sustainable development of buildings is of utmost concern to the building industry. Passive cooling techniques can optimally utilize natural resources in order to reduce...

Zhou, J.; Wu, J.; Zhang, G.; Xu, Y.

2006-01-01T23:59:59.000Z

207

Automation of single-cell techniques in neural tissue  

E-Print Network [OSTI]

The highly heterogeneous nature of cells in the context of native tissue environments necessitates the development of tools and techniques that can manipulate and analyze samples with single-cell resolution. While the past ...

Steinmeyer, Joseph D. (Joseph Daly)

2014-01-01T23:59:59.000Z

208

A critical comparison of human face rendering techniques  

E-Print Network [OSTI]

Human skin exhibits complex light reflectance properties that make it difficult to render realistically. In recent years, many techniques have been introduced to render skin, with varying degrees of complexity and realism. ...

Arizpe, Arturo Andrew

2006-01-01T23:59:59.000Z

209

WebThumb: Interaction Techniques for Small-Screen Browsers  

E-Print Network [OSTI]

205 WebThumb: Interaction Techniques for Small-Screen Browsers Jacob O. Wobbrock* , Jodi Forlizzi are not made or distributed for profit or commercial advantage and that copies bear this notice and the full

Wobbrock, Jacob O.

210

analysis techniques part: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Handbook of Numerical Analysis. Volume V. Techniques of Scientific Computing. (Part 2)....

211

Algorithmic techniques for nanometer VLSI design and manufacturing closure  

E-Print Network [OSTI]

to the traditional circuit design without handling variations. With in- creasing design complexity, innovative efiective and ecient algorithmic techniques are needed to compute a high quality design in terms of both timing and power. After that, variation... OF PHILOSOPHY May 2008 Major Subject: Computer Engineering ALGORITHMIC TECHNIQUES FOR NANOMETER VLSI DESIGN AND MANUFACTURING CLOSURE A Dissertation by SHIYAN HU Submitted to the Oce of Graduate Studies of Texas A&M University in partial fulflllment...

Hu, Shiyan

2008-10-10T23:59:59.000Z

212

Realistic Industrial Scale Energy Optimization: Part II - Analytic Techniques  

E-Print Network [OSTI]

such as distillation path optimization, reaction path optimization and heat exchange optimization. These techniques are being supported by other workers in the area of efficiency measurement, availability analysis and exergy analysis which will serve to guide... and exergy analysis are all examples of targeting tech niques. They are all effective at describing where your process lies in the efficiency domain but do not really help you in telling you where you should be going. These techniques are being discussed...

Kleinschrodt, F. J., III

1982-01-01T23:59:59.000Z

213

A new acceleration technique for the backpropagation neural network paradigm  

E-Print Network [OSTI]

A NEW ACCELERATION TECHNIQUE FOR THE BACKPROPAGATION NEURAL NETWORK PARADIGM A Thesis by JOGEN I(. PATHAI( Submitted to the Oflice ol Graduate Studies of Texas AkM University in partial fulfillment of the requirements for the degree... of MASTER OF SCIENCE December 1991 Major Subject: Computer Science A NEW ACCELERATION TECHNIQUE FOR THE BACKPROPAGATION NEURAL NETWORK PARADIGM A Thesis by JOGEN K. PATHAK Approved as to style and content by: Bahram Nassersharif (Chair of Committee...

Pathak, Jogen K

1991-01-01T23:59:59.000Z

214

Comparison of sampling techniques for Heliothis species in cotton  

E-Print Network [OSTI]

December 19g& Najor Subject: Entomology COMPARISON OF SAMPLING TECHNIQUES FOR HELIOTHIS SPECIES IN COTTON A Thesis by MICHELLE LYNN WALTERS Approved as to style and content by: J. K. Walker, Jr. (Chairman of Committee) J. K. Olson (Member) A. E.... Percival (Member) 2 & F/yg. (Member) F, G. Maxwell (Head of Department) December 1986 ABSTRACT Comparison of Sampling Techniques for Heliothis Species in Cotton. (December 1986) Nichelle Lynn Walters, B. S. , Arizona State University; Chairman...

Walters, Michelle Lynn

1986-01-01T23:59:59.000Z

215

Fiber optic diagnostic techniques for the electrical discharge machining process  

E-Print Network [OSTI]

FIBER OPTIC DIAGNOSTIC TECHNIQUES FOR THE ELECTRICAL DISCHARGE MACHINING PROCESS A Thesis by BRANDON WILLIAM PILLANS Submitted to the Office of Graduate Studies of Texas AB M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE August t 998 Major Subject: Electrical Engineering FIBER OPTIC DIAGNOSTIC TECHNIQUES FOR THE ELECTRICAL DISCHARGE MACHINING PROCESS A Thesis by BRANDON WILLIAM PILLANS Submitted to Texas A8M University in partial...

Pillans, Brandon William

2012-06-07T23:59:59.000Z

216

A comparison of adjoint and data-centric verification techniques.  

SciTech Connect (OSTI)

This document summarizes the results from a level 3 milestone study within the CASL VUQ effort. We compare the adjoint-based a posteriori error estimation approach with a recent variant of a data-centric verification technique. We provide a brief overview of each technique and then we discuss their relative advantages and disadvantages. We use Drekar::CFD to produce numerical results for steady-state Navier Stokes and SARANS approximations. 3

Wildey, Timothy Michael; Cyr, Eric Christopher; Shadid, John Nicolas; Pawlowski, Roger Patrick; Smith, Thomas Michael

2013-03-01T23:59:59.000Z

217

Observations from Australasia using the Gravitational Microlensing Technique  

E-Print Network [OSTI]

The new astronomical technique of gravitational microlensing enables measurements of high precision to be made in certain circumstances. Useful advances have been made in the fields of galactic astronomy, stellar astronomy and planetary science. The technique is best suited to the southern sky, and several observations have been made from Australasia. A sample of these observations is described here. A case is also made for a telescope at the Antarctic dedicated to gravitational microlensing.

Philip Yock

1999-08-18T23:59:59.000Z

218

Radiation induced strand breakage analyzed by tunel technique  

E-Print Network [OSTI]

RADIATION INDUCED STRAND BREAKAGE ANALYZED BY TUNEL TECHNIQUE A Thesis MAtuSSA DAWN REYNOLDS Submitted to the 015ce of Graduate Studies of Texas Ad. M University in partial fu1611ment of the requirements for the dree of MASTER OF SCIENCE May... 2003 Major Subject: Health Physics RADIATION INDUCED STRAND BREAKAGE ANALYZED BY TUNEL TECHNIQUE A Thesis MAtuSSA DAWN REYNOLDS Submitted to Texas %%:M University in partial fulfillmen of the requirements for the degree of MASTER OF SCIENCE...

Reynolds, Marissa Dawn

2003-01-01T23:59:59.000Z

219

Literature survey of heat transfer enhancement techniques in refrigeration applications  

SciTech Connect (OSTI)

A survey has been performed of the technical and patent literature on enhanced heat transfer of refrigerants in pool boiling, forced convection evaporation, and condensation. Extensive bibliographies of the technical literature and patents are given. Many passive and active techniques were examined for pure refrigerants, refrigerant-oil mixtures, and refrigerant mixtures. The citations were categorized according to enhancement technique, heat transfer mode, and tube or shell side focus. The effects of the enhancement techniques relative to smooth and/or pure refrigerants were illustrated through the discussion of selected papers. Patented enhancement techniques also are discussed. Enhanced heat transfer has demonstrated significant improvements in performance in many refrigerant applications. However, refrigerant mixtures and refrigerant-oil mixtures have not been studied extensively; no research has been performed with enhanced refrigerant mixtures with oil. Most studies have been of the parametric type; there has been inadequate examination of the fundamental processes governing enhanced refrigerant heat transfer, but some modeling is being done and correlations developed. It is clear that an enhancement technique must be optimized for the refrigerant and operating condition. Fundamental processes governing the heat transfer must be examined if models for enhancement techniques are to be developed; these models could provide the method to optimize a surface. Refrigerant mixtures, with and without oil present, must be studied with enhancement devices; there is too little known to be able to estimate the effects of mixtures (particularly NARMs) with enhanced heat transfer. Other conclusions and recommendations are offered.

Jensen, M.K.; Shome, B. [Rensselaer Polytechnic Inst., Troy, NY (United States). Dept. of Mechanical Engineering, Aeronautical Engineering and Mechanics

1994-05-01T23:59:59.000Z

220

Magnetotellurics At Long Valley Caldera Geothermal Area (Hermance...  

Open Energy Info (EERE)

Hermance, Et Al., 1988) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Magnetotellurics At Long Valley Caldera Geothermal Area (Hermance, Et...

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

MAGNETOTELLURIC SURVEYING AND MONITORING AT THE COSO GEOTHERMAL...  

Open Energy Info (EERE)

changes in the underground resistivity properties in the vicinity of injection due to fracture porosity enhancement. To these ends, we are acquiring a dense grid of magnetotelluric...

222

3-D Interpretation Of Magnetotelluric Data At The Bajawa Geothermal...  

Open Energy Info (EERE)

Interpretation Of Magnetotelluric Data At The Bajawa Geothermal Field, Indonesia Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: 3-D...

223

Three-Dimensional Inversion of Magnetotelluric Data on a PC,...  

Open Energy Info (EERE)

Coso Geothermal Field Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: Three-Dimensional Inversion of Magnetotelluric Data on a PC,...

224

Determining Plutonium Mass in Spent Fuel with Nondestructive Assay Techniques NGSI Research Overview and Update on NDA Techniques  

E-Print Network [OSTI]

the target delayed gamma peaks. 3. X-Ray Fluorescence (XRF)The XRF assay technique is being developed by the Los Alamosquantities in the spent fuel. XRF is unique among the other

A., V. Mozin, S.J. Tobin, L.W. Cambell, J.R. Cheatham, C.R. Freeman, C.J. Gesh,

2012-01-01T23:59:59.000Z

225

Determining Plutonium Mass in Spent Fuel with Nondestructive Assay Techniques -- Preliminary Modeling Results Emphasizing Integration among Techniques  

E-Print Network [OSTI]

Die-away Technique (DDT) is an active interrogationdepicted in Fig. 2. With the DDT a measurement begins withrate is representative for a DDT system. 28 In Fig. 2, a

Tobin, S. J.

2010-01-01T23:59:59.000Z

226

Statistical Modeling of Photovoltaic Reliability Using Accelerated Degradation Techniques (Poster)  

SciTech Connect (OSTI)

We introduce a cutting-edge life-testing technique, accelerated degradation testing (ADT), for PV reliability testing. The ADT technique is a cost-effective and flexible reliability testing method with multiple (MADT) and Step-Stress (SSADT) variants. In an environment with limited resources, including equipment (chambers), test units, and testing time, these techniques can provide statistically rigorous prediction of lifetime and other interesting parameters, such as failure rate, warranty time, mean time to failure, degradation rate, activation energy, acceleration factor, and upper limit level of stress. J-V characterization can be used for degradation data and the generalized Eyring model can be used for the thermal-humidity stress condition. The SSADT model can be constructed based on the cumulative damage model (CEM), which assumes that the remaining test united are failed according to cumulative density function of current stress level regardless of the history on previous stress levels.

Lee, J.; Elmore, R.; Jones, W.

2011-02-01T23:59:59.000Z

227

First fusion proton measurements in TEXTOR plasmas using activation technique  

SciTech Connect (OSTI)

MeV particle loss measurements from fusion plasmas, in particular alpha particles, remain difficult in large fusion devices and further R and D is needed for ITER. This paper describes the first attempt to measure 3 MeV escaping fusion protons emitted from TEXTOR tokamak plasmas using activation technique. This technique was successfully demonstrated, initially, in 2006 on the JET tokamak. An ion camera equipped with a collimator and several types of activation detectors was installed inside the TEXTOR vacuum vessel to perform these measurements. After irradiation, the detectors were analyzed using ultra low level gamma-ray spectrometry at the HADES underground laboratory. 3 MeV escaping fusion protons were detected in larger number -{approx}6 times more - compared to earlier measurements using this technique on JET. Another major progress was the reduction of the cooling time by a factor of 50, which made possible to detect radionuclides with half-life of less than 90 min.

Bonheure, G.; Wassenhove, G. Van [ERM-KMS, Trilateral Euregio Cluster, B-1000 Brussels (Belgium); Mlynar, J. [Association Euratom-IPP.CR, Institute of Plasma Physics AS CR, v.v.i., Za Slovankou 3, CZ-182 00 Praha 8 (Czech Republic); Hult, M.; Gonzalez de Orduna, R.; Lutter, G. [Institute for Reference Materials and Measurements (IRMM), Retieseweg 111, B-2440 Geel (Belgium); Vermaercke, P. [SCK-CEN, Boeretang, B-2400 Mol (Belgium); Huber, A.; Schweer, B.; Esser, G.; Biel, W. [Forschungszentrum Juelich GmbH, Institut fuer Plasmaphysik, EURATOM-Assoziation, Trilateral Euregio Cluster, D-52425 Juelich (Germany)

2012-10-15T23:59:59.000Z

228

Electro-optic techniques in electron beam diagnostics  

SciTech Connect (OSTI)

Electron accelerators such as laser wakefield accelerators, linear accelerators driving free electron lasers, or femto-sliced synchrotrons, are capable of producing femtosecond-long electron bunches. Single-shot characterization of the temporal charge profile is crucial for operation, optimization, and application of such accelerators. A variety of electro-optic sampling (EOS) techniques exists for the temporal analysis. In EOS, the field profile from the electron bunch (or the field profile from its coherent radiation) will be transferred onto a laser pulse co-propagating through an electro-optic crystal. This paper will address the most common EOS schemes and will list their advantages and limitations. Strong points that all techniques share are the ultra-short time resolution (tens of femtoseconds) and the single-shot capabilities. Besides introducing the theory behind EOS, data from various research groups is presented for each technique.

van Tilborg, Jeroen; Toth, Csaba; Matlis, Nicholas; Plateau, Guillaume; Leemans, Wim

2011-06-17T23:59:59.000Z

229

An iterative technique for solving equations of statistical equilibrium  

E-Print Network [OSTI]

Superlevel partitioning is combined with a simple relaxation procedure to construct an iterative technique for solving equations of statistical equilibrium. In treating an $N$-level model atom, the technique avoids the $N^{3}$ scaling in computer time for direct solutions with standard linear equation routines and also does not fail at large $N$ due to the accumulation of round-off errors. In consequence, the technique allows detailed model atoms with $N \\ga 10^{3}$, such as those required for iron peak elements, to be incorporated into diagnostic codes for analysing astronomical spectra. Tests are reported for a 394-level Fe II ion and a 1266-level Ni I--IV atom.

L. B. Lucy

2001-03-21T23:59:59.000Z

230

Centrifuge Techniques and Apparatus for Transport Experiments in Porous Media  

SciTech Connect (OSTI)

This paper describes experimental approaches and apparatus that we have developed to study solute and colloid transport in porous media using Idaho National Laboratory's 2-m radius centrifuge. The ex-perimental techniques include water flux scaling with applied acceleration at the top of the column and sub-atmospheric pressure control at the column base, automation of data collection, and remote experimental con-trol over the internet. These apparatus include a constant displacement piston pump, a custom designed liquid fraction collector based on switching valve technology, and modified moisture monitoring equipment. Suc-cessful development of these experimental techniques and equipment is illustrated through application to transport of a conservative tracer through unsaturated sand column, with centrifugal acceleration up to 40 gs. Development of such experimental equipment that can withstand high accelerations enhances the centrifuge technique to conduct highly controlled unsaturated solute/colloid transport experiments and allows in-flight liquid sample collection of the effluent.

Earl D. Mattson; Carl D. Paler; Robert W. Smith; Markus Flury

2010-06-01T23:59:59.000Z

231

Optical Fiber Technique for In-Reactor Mechanical Properties Measurement  

SciTech Connect (OSTI)

In-reactor measurement of material properties is required for a better understanding of radiation effects on materials. We present an optical fiber based technique for measuring changes in elastic properties which involves exciting and measuring flexural vibrations in a thin cantilever beam. By exciting the beam and measuring the natural frequency, changes in the modulus of elasticity can be monitored. The technique is demonstrated by monitoring the elastic property changes of a beam fabricated from copper, as the copper undergoes recrystallization at elevated temperature.

Robert S. Schley; Zilong Hua; David H. Hurley; Heng Ban

2012-07-01T23:59:59.000Z

232

Optical Emission Spectroscopic Techniques for Low Electron Density Diagnostics  

SciTech Connect (OSTI)

This paper comprises an analysis of optical emission spectroscopy (OES) techniques and results of their application for diagnostics of middle and low electron densities in low temperature plasmas. The following OES diagnostic techniques based on: 1) line merging along spectral line series, 2) use of line shapes and Stark halfwidths of hydrogen Balmer lines, 3) line shape of helium lines with forbidden components and 4) use of molecular nitrogen bandhead intensities are studied, discussed, tested and applied and in some cases ugraded for electron density measurements. The overall comparative analysis is performed also.

Ivkovic, M. [Institute of Physics, 11081 Belgrade, P.O.Box 68 (Serbia and Montenegro)

2006-12-01T23:59:59.000Z

233

Multi-spectral glucose sensing using a polarimetric differencing technique  

E-Print Network [OSTI]

rotation of the molecule are known, the concentration of the molecule in solution can be calculated. More on the theory of this technique will be discussed in chapter III. 13 Gillham was the first to develop a polarimetry technique using a Faraday..., 42]. March developed a two Faraday rotator system in which one was used for modulation and the second for feedback control. They were able to show system linearity for both hypo- and hyperglycemic ranges but were only able to obtain 53. 3 mg...

Michael, Mathew

2012-06-07T23:59:59.000Z

234

NEUTRON SPECTROSCOPY BY DOUBLE SCATTER AND ASSOCIATED PARTICLE TECHNIQUES.  

SciTech Connect (OSTI)

Multiple detectors can provide [1,2] both directional and spectroscopic information. Neutron spectra may be obtained by neutron double scatter (DSNS), or the spontaneous fission associated particle (AP) technique. Spontaneous fission results in the creation of fission fragments and the release of gamma rays and neutrons. As these occur at the same instant, they are correlated in time. Thus gamma ray detection can start a timing sequence relative to a neutron detector where the time difference is dominated by neutron time-of-flight. In this paper we describe these techniques and compare experimental results with Monte Carlo calculations.

DIOSZEGI,I.

2007-10-28T23:59:59.000Z

235

Novel technique for constraining r-process (n,$?$) reaction rates  

E-Print Network [OSTI]

A novel technique has been developed, which will open exciting new opportunities for studying the very neutron-rich nuclei involved in the r-process. As a proof-of-principle, the $\\gamma$-spectra from the $\\beta$-decay of $^{76}$Ga have been measured with the SuN detector at the National Superconducting Cyclotron Laboratory. The nuclear level density and $\\gamma$-ray strength function are extracted and used as input to Hauser-Feshbach calculations. The present technique is shown to strongly constrain the $^{75}$Ge($n,\\gamma$)$^{76}$Ge cross section and reaction rate.

A. Spyrou; S. N. Liddick; A. C. Larsen; M. Guttormsen; K. Cooper; A. C. Dombos; D. J. Morrissey; F. Naqvi; G. Perdikakis; S. J. Quinn; T. Renstrm; J. A. Rodriguez; A. Simon; C. S. Sumithrarachchi; R. G. T. Zegers

2014-08-27T23:59:59.000Z

236

Determining Plutonium Mass in Spent Fuel with Nondestructive Assay Techniques -- Preliminary Modeling Results Emphasizing Integration among Techniques  

SciTech Connect (OSTI)

There are a variety of motivations for quantifying Pu in spent (used) fuel assemblies by means of nondestructive assay (NDA) including the following: strengthen the capabilities of the International Atomic Energy Agencies to safeguards nuclear facilities, quantifying shipper/receiver difference, determining the input accountability value at reprocessing facilities and providing quantitative input to burnup credit determination for repositories. For the purpose of determining the Pu mass in spent fuel assemblies, twelve NDA techniques were identified that provide information about the composition of an assembly. A key point motivating the present research path is the realization that none of these techniques, in isolation, is capable of both (1) quantifying the elemental Pu mass of an assembly and (2) detecting the diversion of a significant number of pins. As such, the focus of this work is determining how to best integrate 2 or 3 techniques into a system that can quantify elemental Pu and to assess how well this system can detect material diversion. Furthermore, it is important economically to down-select among the various techniques before advancing to the experimental phase. In order to achieve this dual goal of integration and down-selection, a Monte Carlo library of PWR assemblies was created and is described in another paper at Global 2009 (Fensin et al.). The research presented here emphasizes integration among techniques. An overview of a five year research plan starting in 2009 is given. Preliminary modeling results for the Monte Carlo assembly library are presented for 3 NDA techniques: Delayed Neutrons, Differential Die-Away, and Nuclear Resonance Fluorescence. As part of the focus on integration, the concept of"Pu isotopic correlation" is discussed and the role of cooling time determination.

Tobin, S. J.; Fensin, M. L.; Ludewigt, B. A.; Menlove, H. O.; Quiter, B. J.; Sandoval, N. P.; Swinhoe, M. T.; Thompson, S. J.

2009-08-03T23:59:59.000Z

237

Laser sources and techniques for spectroscopy and dynamics  

SciTech Connect (OSTI)

This program focuses on the development of novel laser and spectroscopic techniques in the IR, UV, and VUV regions for studying combustion related molecular dynamics at the microscopic level. Laser spectroscopic techniques have proven to be extremely powerful in the investigation of molecular processes which require very high sensitivity and selectivity. The authors approach is to use quantum electronic and non-linear optical techniques to extend the spectral coverage and to enhance the optical power of ultrahigh resolution laser sources so as to obtain and analyze photoionization, fluorescence, and photoelectron spectra of jet-cooled free radicals and of reaction products resulting from unimolecular and bimolecular dissociations. New spectroscopic techniques are developed with these sources for the detection of optically thin and often short-lived species. Recent activities center on regenerative amplification of high resolution solid-state lasers, development of tunable high power mid-IR lasers and short-pulse UV/VUV tunable lasers, and development of a multipurpose high-order suppressor crossed molecular beam apparatus for use with synchrotron radiation sources. This program also provides scientific and technical support within the Chemical Sciences Division to the development of LBL`s Combustion Dynamics Initiative.

Kung, A.H. [Lawrence Berkeley Laboratory, CA (United States)

1993-12-01T23:59:59.000Z

238

Heart chambers and whole heart segmentation techniques: review  

E-Print Network [OSTI]

Heart chambers and whole heart segmentation techniques: review Dongwoo Kang Jonghye Woo Piotr J://electronicimaging.spiedigitallibrary.org/ on 01/15/2014 Terms of Use: http://spiedl.org/terms #12;Heart chambers and whole heart segmentation, and reproducible segmentation methods. Figure 1 illustrates an example of segmentation of heart on CT scan. A

Kuo, C.-C. "Jay"

239

Chemical Investigations of Superheavy Elements - Current Results and New Techniques  

SciTech Connect (OSTI)

Chemical studies of the superheavy elements have progressed tremendously in recent years. This is illustrated here using the following four examples: (i) gas chemical studies of element 112, (ii) radiochemical investigations of the reaction 248Cm(26Mg,xn)274-xHs, (iii) complexation studies of rutherfordium, and (iv) the development of the technique of physical preseparation.

Duellmann, Christoph E. [Gesellschaft fuer Schwerionenforschung mbH, Planckstrasse 1, 64291 Darmstadt (Germany)

2007-02-26T23:59:59.000Z

240

UNIVERSITE HASSAN I Settat Maroc FACULTE DES SCIENCES ET TECHNIQUES  

E-Print Network [OSTI]

UNIVERSITE HASSAN I ­ Settat ­ Maroc FACULTE DES SCIENCES ET TECHNIQUES ECOLE DOCTORALE DES Hassan I, Settat, Maroc Président du jury et Rapporteur M'hammed Said EL KEBBAJ Université Hassan II, Ben M'Sick, Casablanca, Maroc Examinateur Abdelaziz SOUKRI Université Hassan II, Ain Chock, Casablanca

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Optimizing MATLAB feval with Dynamic Techniques Nurudeen Lameed Laurie Hendren  

E-Print Network [OSTI]

Optimizing MATLAB feval with Dynamic Techniques Nurudeen Lameed Laurie Hendren Sable Research Group,hendren}@cs.mcgill.ca, http://www.sable.mcgill.ca/mclab Abstract MATLAB is a popular dynamic array-based language used by en- gineers, scientists and students worldwide. The built-in function feval is an important MATLAB feature

242

PART II TECHNIQUES PROJECT MODELLING OF THE CORROSION OF  

E-Print Network [OSTI]

- 1 - PART II TECHNIQUES PROJECT MODELLING OF THE CORROSION OF BINARY ALLOYS R.A. Jones Produced and temperatures. In this work a neural network method was employed to study how the rate of corrosion of Fe accordance with the literature. 1. Introduction The atmosphere is the corrosive environment to which alloys

Cambridge, University of

243

SIMULATION TECHNIQUES IN HYPERSONIC LOW-DENSITY AEROTHERMODYNAMICS  

E-Print Network [OSTI]

SIMULATION TECHNIQUES IN HYPERSONIC LOW-DENSITY AEROTHERMODYNAMICS V. V. Riabov Rivier University, 420 South Main Street, Nashua, NH 03060, USA, vriabov@rivier.edu Hypersonic rarefied flows near-8] and hypersonic flights. The direct simulation Monte- Carlo (DSMC) method [9] is used to study the influence

Riabov, Vladimir V.

244

Computation Migration based on Mobile IP and Intelligent Agent Techniques  

E-Print Network [OSTI]

Page 1 Computation Migration based on Mobile IP and Intelligent Agent Techniques Runtong Zhang, Dongmei Zhang, Zhigang Kan and Jian Ma Advanced Internet Technology, Nokia (China) R&D Center No. 11, He is to investigate the use of mobile agents in the platform of mobile IPv6, to provide adapted services to mobile

Zhang, Runtong

245

A COUPLED HYDRAULIC AND ELECTRICAL STRESS DETERMINATION TECHNIQUE  

E-Print Network [OSTI]

A COUPLED HYDRAULIC AND ELECTRICAL STRESS DETERMINATION TECHNIQUE Mai Linh DOAN Dpartement de Alps. The Hydraulic Tests on Preexisting Fractures (HTPF) method was chosen for it provides means to determine the complete stress tensor. The campaign was performed with a specific probe, coupling hydraulic

246

Application of AI techniques to blast furnace operations  

SciTech Connect (OSTI)

It was during the first stages of application of artificial intelligence (AI) to industrial fields, that the ironmaking division of Mizushima works at Kawasaki Steel recognized its potential. Since that time, the division has sought applications for these techniques to solve various problems. AI techniques applied to control the No. 3 blast furnace operations at the Mizushima works include: Blast furnace control by a diagnostic type of expert system that gives guidance to the actions required for blast furnace operation as well as control of furnace heat by automatically setting blast temperature; Hot stove combustion control by a combination of fuzzy inference and a physical model to insure good thermal efficiency of the stove; and blast furnace burden control using neural networks makes it possible to connect the pattern of gas flow distribution with the condition of the furnace. Experience of AI to control the blast furnace and other ironmaking operations has proved its capability for achieving automation and increased operating efficiency. The benefits are very high. For these reasons, the applications of AI techniques will be extended in the future and new techniques studied to further improve the power of AI.

Iida, Osamu; Ushijima, Yuichi; Sawada, Toshiro [Kawasaki Steel Corp., Kurashiki (Japan)

1995-10-01T23:59:59.000Z

247

Robust Neuroimaging-Based Classification Techniques of Autistic vs. Typically  

E-Print Network [OSTI]

abnormalities in several brain regions. Increased head size was the first observed characteristic in children1 Robust Neuroimaging-Based Classification Techniques of Autistic vs. Typically Developing Brain with autism. According to the published studies, different anatomical structures of the brain have been

Farag, Aly A.

248

Some Finance Problems Solved with Nonsmooth Optimization Techniques  

E-Print Network [OSTI]

Some Finance Problems Solved with Nonsmooth Optimization Techniques R. B. VINTER 1 AND H. ZHENG 2 analysis and mathematical finance communities to the scope for applications of nonsmooth optimization to finance, by studying in detail two illustrative examples. The first concerns the maximization of a ter

Vinter, Richard

249

A TECHNIQUE FOR DIRECTLY MEASURING THE GRAVITATIONAL ACCELERATION OF ANTIHYDROGEN  

E-Print Network [OSTI]

, and the construction of the Low Energy An­ tiproton Ring (LEAR) at CERN has made it possible to trap substantial of antimatter (g) by measuring the deflection of a beam of neutral antihydrogen atoms in the Earth trapping techniques has made it possible to hold and cool particles (charged or neutral) 3

Phillips, Thomas J.

250

Integration of Ab Initio Nuclear Physics Calculations with Optimization Techniques  

E-Print Network [OSTI]

Integration of Ab Initio Nuclear Physics Calculations with Optimization Techniques Masha Sosonkina1 into the field of nuclear physics calculations where the objective functions are very complex and computationally the ab initio nuclear physics code MFDn and the VTDIRECT95 code for derivative-free op- timization. We

Sosonkina, Masha

251

Sandia software guidelines: Volume 5, Tools, techniques, and methodologies  

SciTech Connect (OSTI)

This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. This volume describes software tools and methodologies available to Sandia personnel for the development of software, and outlines techniques that have proven useful within the Laboratories and elsewhere. References and evaluations by Sandia personnel are included. 6 figs.

Not Available

1989-07-01T23:59:59.000Z

252

Sneaking Interaction Techniques into Electric Vehicles Sebastian Loehmann  

E-Print Network [OSTI]

Sneaking Interaction Techniques into Electric Vehicles Sebastian Loehmann University of Munich (LMU Due to the release of several electric vehicles (EV) to the car market, the number of sales from regular combustion engine cars to create electric vehicle information systems (EVIS). We argue

253

Building DomainSpecific Search Engines with Machine Learning Techniques  

E-Print Network [OSTI]

.netpart.com lets the user search over company pages by hostname, company name, and location. ffl wwwBuilding Domain­Specific Search Engines with Machine Learning Techniques Andrew McCallum zy Science Carnegie Mellon University Pittsburgh, PA 15213 Abstract Domain­specific search engines

McCallum, Andrew

254

Proceedings of the twelfth conference on explosives and blasting techniques  

SciTech Connect (OSTI)

This book presents the papers given at a conference on the use of explosive fracturing to construct underground energy facilities. Topics considered at the conference included the Atomic Energy of Canada Limited's underground research laboratory, drilling and blasting techniques for canals, pipeline trenches, blasting costs, underground coal mining, presplitting of granite, energy consumption, and overburden blasting vibrations.

Konya, C.J.

1986-01-01T23:59:59.000Z

255

Cost Modeling and Design Techniques for Integrated Package Distribution Systems  

E-Print Network [OSTI]

Cost Modeling and Design Techniques for Integrated Package Distribution Systems Karen R. Smilowitz and Carlos F. Daganzo December 23, 2005 Abstract Complex package distribution systems are designed using-scale integrated distribution networks. While the network design problem is quite complex, we demonstrate

Smilowitz, Karen

256

Cost Modeling and Design Techniques for Integrated Package Distribution Systems  

E-Print Network [OSTI]

Cost Modeling and Design Techniques for Integrated Package Distribution Systems Karen R. Smilowitz and Carlos F. Daganzo June 27, 2002 Abstract Complex package distribution systems are designed using idealizations of network geometries, operating costs, demand and customer distributions, and routing patterns

Daganzo, Carlos F.

257

Applying a Pragmatics-Based Creativity-Fostering Technique to  

E-Print Network [OSTI]

Engineering and Creativity: An Innovative Approach Based on a Model of the Pragmatics of 1 #12;Applying EPMcreate (EPM Creative Requirements Engineering TEchnique) that consists of sixteen steps. In each step to foster creativity in requirements engineering are still under-appreciated [7] and under

Berry, Daniel M.

258

Intraruminal infusion technique for the estimation of ruminal VFA production  

E-Print Network [OSTI]

Intraruminal infusion technique for the estimation of ruminal VFA production P Huhtanen, S Jaakkola, in which x is the amount of Bu (or Pr) infused (g/d). Production of Ac (or other VFA) was calculated as [((mmol/mol Ac) / (mmol/mol Bu)) x Bu production (mmol/d)] - amount of Ac infused (mmol

Paris-Sud XI, Université de

259

Friction Problems in Servomechanisms: Modeling and Compensation Techniques  

E-Print Network [OSTI]

Friction Problems in Servomechanisms: Modeling and Compensation Techniques Jan Tommy Gravdahl of this presentation Introduction Friction models 1. Static models 2. Models with time delay 3. Dynamic models Friction compensation 1. Non-model based compensation 2. Compensation based on static friction models 3

Gravdahl, Jan Tommy

260

Noise source identification techniques: simple to advanced applications  

E-Print Network [OSTI]

required. Practical application examples ranging from hearing aids to wind turbines are presented to optimise the noise emission from a wide range of products including vehicles, household goods and windNoise source identification techniques: simple to advanced applications K.B. Ginn and K. Haddad Br

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Vol. 38, No. 2 (2005) BioTechniques 1 Introduction  

E-Print Network [OSTI]

subsets to be tagged, puri- fied, and analyzed. As a result, this technique is able to identify novel), generally consist of three basic elements (Figure 1). The warhead consists of a reactive func- tional group interactions, and prevents steric congestion. The warhead is perhaps to most critical component of an ABP

Bogyo, Matthew

2005-01-01T23:59:59.000Z

262

Efficient Runtime-Enforcement Techniques for Policy Weaving  

E-Print Network [OSTI]

Efficient Runtime-Enforcement Techniques for Policy Weaving Richard Joiner , Thomas Reps, , Somesh, NY, USA IBM Research, New Delhi, India Rutgers University, Piscataway, NJ, USA {joiner,reps,jha}@cs.wisc.edu, mohan.dhawan@in.ibm.com, vinodg@cs.rutgers.edu ABSTRACT Policy weaving is a program

Ganapathy, Vinod

263

A Survey of Single-Database PIR: Techniques and Applications  

E-Print Network [OSTI]

A Survey of Single-Database PIR: Techniques and Applications Rafail Ostrovsky William E. Skeith III Abstract In this paper we survey the notion of Single-Database Private Information Re- trieval (PIR). The first Single-Database PIR was constructed in 1997 by Kushilevitz and Ostrovsky and since then Single

Ostrovsky, Rafail

264

A Survey of SingleDatabase PIR: Techniques and Applications #  

E-Print Network [OSTI]

A Survey of Single­Database PIR: Techniques and Applications # Rafail Ostrovsky + William E. Skeith (PIR). The first Single­Database PIR was constructed in 1997 by Kushilevitz and Ostrovsky and since then Single­Database PIR has emerged as an important cryp­ tographic primitive. For example, Single

265

A Survey of SingleDatabase PIR: Techniques and Applications  

E-Print Network [OSTI]

A Survey of Single­Database PIR: Techniques and Applications Rafail Ostrovsky # William E. Skeith (PIR). The first Single­Database PIR was constructed in 1997 by Kushilevitz and Ostrovsky and since then Single­Database PIR has emerged as an important cryp­ tographic primitive. For example, Single

Ostrovsky, Rafail

266

Stochastic Modeling Techniques: Understanding and using hidden Markov models  

E-Print Network [OSTI]

Tutorial Stochastic Modeling Techniques: Understanding and using hidden Markov models Leslie Grateolander kimmen@cse.ucsc.edu 1 #12; Contents 1 Introduction 3 2 Mathematical Foundations of Stochastic Models 4 2 : : : : : : : : : : : : : : : : : : : : : : : : : : 27 7 Validating a model 30 8 Local HMM installation 31 8.1 Obtaining SAM and HMMer

California at Santa Cruz, University of

267

Energy Conservation Techniques for Disk Array-Based Servers  

E-Print Network [OSTI]

, we introduce a new conser- vation technique, called Popular Data Concentration (PDC), that migrates that takes advantage of PDC. In the context of this server, we compare PDC to the Massive Array of Idle Disks and a wide range of parame- ters. Our results for conventional disks show that PDC and MAID can only conserve

Bianchini, Ricardo

268

Energy Conservation Techniques for Disk ArrayBased Servers  

E-Print Network [OSTI]

, we introduce a new conser­ vation technique, called Popular Data Concentration (PDC), that migrates that takes advantage of PDC. In the context of this server, we compare PDC to the Massive Array of Idle Disks and a wide range of parame­ ters. Our results for conventional disks show that PDC and MAID can only conserve

Bianchini, Ricardo

269

ACCELERATED TECHNIQUE TO PREDICT STRESS-RUPTURE BEHAVIOUR OF ARAMID  

E-Print Network [OSTI]

ACCELERATED TECHNIQUE TO PREDICT STRESS-RUPTURE BEHAVIOUR OF ARAMID FIBRES Ioannis P. Giannopoulos-rupture, Accelerated testing, Jaw effect, Creep activation energy ABSTRACT: The Stepped Isothermal Method (SIM) allows accelerated testing of materials to determine their creep response, and in particular, their creep

Burgoyne, Chris

270

Scheduling Techniques for Synchronous and Multidimensional Synchro nous Dataflow  

E-Print Network [OSTI]

techniques for programs expressed as Synchronous Dataflow (SDF) and Multidimensional Synchronous dataflow­time constraints. Multidimensional Synchronous Dataflow (MDSDF) is an extension of SDF to multiple dimensions spaces, are more naturally modeled and specified than in SDF. The amount of on­chip memory available

271

Scheduling Techniques for Synchronous and Multidimensional Synchro-nous Dataflow  

E-Print Network [OSTI]

techniques for programs expressed as Synchronous Dataflow (SDF) and Multidimensional Synchronous dataflow-time constraints. Multidimensional Synchronous Dataflow (MDSDF) is an extension of SDF to multiple dimensions spaces, are more naturally modeled and specified than in SDF. The amount of on-chip memory available

272

Video Entity Resolution: Applying ER Techniques for Smart Video Surveillance  

E-Print Network [OSTI]

buildings, smart grid, and so on. In this paper, we focus on smart surveillance systems wherein video improvements on how the building is used. One of the key challenges in building smart surveillance systemsVideo Entity Resolution: Applying ER Techniques for Smart Video Surveillance Liyan Zhang Ronen

Kalashnikov, Dmitri V.

273

Power Management Techniques for Data Centers: A Sparsh Mittal  

E-Print Network [OSTI]

become essential. In this paper, we highlight the need of achieving energy efficiency in data centers insights into the techniques for improving energy efficiency of data centers and encourage the designers, Power Management, Low-power Design, Energy Efficiency, Green Computing, DVFS, Server Consolidation I

274

A New Unblocking Technique to Warmstart Interior Point Methods ...  

E-Print Network [OSTI]

Dec 19, 2006 ... This analysis is used in a new technique to warmstart ... Because of their weakness in warmstarting, IPMs have not made as big an impact in these areas. Over the years ...... investment strategy in a selection of assets over time. ... point method, European Journal of Operational Research, 85 (1995), pp.

2006-12-19T23:59:59.000Z

275

Plant Growth Measurement Techniques Using Near-Infrared  

E-Print Network [OSTI]

Plant Growth Measurement Techniques Using Near-Infrared Imagery Amr Aboelela John Barron Dept, for measuring plant growth for corn seedlings and Caster Oil Bean leaves. A near-infrared camera, which allows to hypothesize where growth might be taking place. Keywords: Near-Infrared Imagery, Corn Seedling stem

Barron, John

276

innovative techniques Near-infrared spiroximetry: noninvasive measurements  

E-Print Network [OSTI]

innovative techniques Near-infrared spiroximetry: noninvasive measurements of venous saturationO2 ) in tissues using near-infrared spectroscopy (NIRS). This method is based on the respiration-induced oscillations of the near-infrared ab- sorption in tissues, and we call it spiroximetry (the prefix spiro means

277

Efficient Techniques for High-Speed Elliptic Curve Cryptography  

E-Print Network [OSTI]

Gebotys Department of Electrical and Computer Engineering, University of Waterloo, Canada, {plonga] is an integer, is the central and most time-consuming operation in Elliptic Curve Cryptography (ECC). Hence, its gained increasing importance in recent years. In this work, we combine several efficient techniques

278

REVIEW OF SUPERCONDUCTING MAGNETOMETERS AND CRYOGENIC REFRIGERATION TECHNIQUES  

E-Print Network [OSTI]

3. REVIEW OF SUPERCONDUCTING MAGNETOMETERS AND CRYOGENIC REFRIGERATION TECHNIQUES By W. S. GOREE of the macroscopic quantum nature of the superconducting state. Several of these properties have direct application a closed superconducting path must remain constant as long as the path remains superconducting

Boyer, Edmond

279

Surgical implantation techniques for electronic tags in fish  

SciTech Connect (OSTI)

Intracoelomic implantation of transmitters into fish requires making a surgical incision, incision closure, and other surgery related techniques; however, the tools and techniques used in the surgical process vary widely. We review the available literature and focus on tools and techniques used for conducting surgery on juvenile salmonids because of the large amount of research that is conducted on them. The use of sterilized surgical instruments properly selected for a given size of fish will minimize tissue damage and infection rates, and speed the wound healing of fish implanted with transmitters. For the implantation of transmitters into small fish, the optimal surgical methods include making an incision on the ventral midline along the linea alba (for studies under 1 month), protecting the viscera (by lifting the skin with forceps while creating the incision), and using absorbable monofilament suture with a small-swaged-on swaged-on tapered or reverse-cutting needle. Standardizing the implantation techniques to be used in a study involving particular species and age classes of fish will improve survival and transmitter retention while allowing for comparisons to be made among studies and across multiple years. This review should be useful for researchers working on juvenile salmonids and other sizes and species of fish.

Wagner, Glenn N.; Cooke, Steven J.; Brown, Richard S.; Deters, Katherine A.

2011-01-01T23:59:59.000Z

280

Investigative Tools and Techniques for Indoor Air Quality Studies  

E-Print Network [OSTI]

INVESTIGATIVE TOOLS AND TECHNIQUES FOR INDOOR AIR QUALITY STUDIES Steven R. Kennedy, C.E.P., REM, project Manager I C. Brandon ~uinn, P.E., C.P.G., Project Manager James E. Henderson, Ph. D., Director of ~nalytical services ' Robert G. ~ickery...

Kennedy, S. R.; Quinn, C. B.; Henderson, J. E.; Vickery, R. G.

1994-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Some Techniques for Computing Wave Propagation in Optical Waveguides  

E-Print Network [OSTI]

Some Techniques for Computing Wave Propagation in Optical Waveguides Ya Yan Lu Department and be separated again. For a general z-varying wave-guiding structure, the frequency domain propagation problem of Mathematics, City University of Hong Kong Kowloon, Hong Kong Abstract Optical wave-guiding structures

Lu, Ya Yan

282

Post-correlation RFI excision techniques for the Parkes  

E-Print Network [OSTI]

· detect and mask RFI parametrically · advance and apply existing techniques for handling solar baseline ripple #12;Explicit RFI tagging 1408 MHz correlator birdie #12;Coincidence RFI flagging · Detect RFI-smooth = timewise adjacent flux ratio outside the range 0.4 to 2.5 time flux #12;Non-smooth event flagging #12;Solar

Ellingson, Steven W.

283

Study of microfluidic measurement techniques using novel optical imaging diagnostics  

E-Print Network [OSTI]

is applied for a 3-D vector field mapping in a microscopic flow and a Brownian motion tracking of nanoparticles. This technique modifies OSSM system for a micro-fluidic experiment, and the imaging system captures a diffracted particle image having numerous...

Park, Jaesung

2007-04-25T23:59:59.000Z

284

Adapting Optimization Techniques to Description Logics with Concrete Domains  

E-Print Network [OSTI]

Adapting Optimization Techniques to Description Logics with Concrete Domains Anni-Yasmin Turhan backtracking and model merging can be adapted to description logics with concrete domains. We propose al) a new requirement for concrete domains in order to enable dependency directed backtracking for all clash

Haarslev, Volker

285

Adapting Optimization Techniques to Description Logics with Concrete Domains  

E-Print Network [OSTI]

Adapting Optimization Techniques to Description Logics with Concrete Domains Anni­Yasmin Turhan backtracking and model merging can be adapted to description logics with concrete domains. We propose al) a new requirement for concrete domains in order to enable dependency directed backtracking for all clash

Haarslev, Volker

286

Extending Plan Inference Techniques to Recognize Intentions in Information Graphics  

E-Print Network [OSTI]

Extending Plan Inference Techniques to Recognize Intentions in Information Graphics Stephanie Elzer information graphics. Our work is part of a larger project to de- velop an interactive natural language system graphics. 1 Introduction The amount of information available electronically has increased dramatically over

Carberry, Sandra

287

EELE408 Photovoltaics Lecture 16: Silicon Solar Cell Fabrication Techniques  

E-Print Network [OSTI]

;3 Screen Printed Solar Cells · Firing the contacts ­ The furnace heats the cell to a high temperature by Efficiency 22 Rear Panel before Lamination 23 Buried Contact Solar Cells · High Efficiency · Laser groved1 EELE408 Photovoltaics Lecture 16: Silicon Solar Cell Fabrication Techniques Dr. Todd J. Kaiser

Kaiser, Todd J.

288

Survey: Techniques for Efficient energy consumption in Mobile Architectures  

E-Print Network [OSTI]

Survey: Techniques for Efficient energy consumption in Mobile Architectures Sean Maloney University@cs.ucsb.edu March 16th, 2012 Abstract As the world becomes more dependent on mobile technologies, battery life battery life is a delicate balance of give and take between longer battery life and more functionality

California at Santa Barbara, University of

289

A Transformed Lagged Ensemble Forecasting Technique for Increasing Ensemble Size  

E-Print Network [OSTI]

A Transformed Lagged Ensemble Forecasting Technique for Increasing Ensemble Size Andrew. R.Lawrence@ecmwf.int #12;Abstract An ensemble-based data assimilation approach is used to transform old en- semble. The impact of the transformations are propagated for- ward in time over the ensemble's forecast period

Hansens, Jim

290

Electrothermal Analysis and Optimization Techniques for Nanoscale Integrated Circuits  

E-Print Network [OSTI]

of finite difference methods, finite element methods, or Green function based methods, each of which in the design of electrical circuits. This paper overviews several methods for the analysis and optimization overview a restricted set of thermal optimization methods, specifically, placement techniques for thermal

Sapatnekar, Sachin

291

GREAT LAKES COASTAL WETLANDS MONITORING AND ASSESSMENT TECHNIQUES  

E-Print Network [OSTI]

GREAT LAKES COASTAL WETLANDS MONITORING AND ASSESSMENT TECHNIQUES By KRISTINA KOSTUK, B OF SCIENCE (2006) McMaster University (Biology) Hamilton, Ontario TITLE: Great Lakes Coastal Wetlands coastal wetlands. The first chapter examines the influence of gear type and sampling protocol on fish

McMaster University

292

Results of NDE Technique Evaluation of Clad Hydrides  

SciTech Connect (OSTI)

This report fulfills the M4 milestone, M4FT-14IN0805023, Results of NDE Technique Evaluation of Clad Hydrides, under Work Package Number FT-14IN080502. During service, zirconium alloy fuel cladding will degrade via corrosion/oxidation. Hydrogen, a byproduct of the oxidation process, will be absorbed into the cladding and eventually form hydrides due to low hydrogen solubility limits. The hydride phase is detrimental to the mechanical properties of the cladding and therefore it is important to be able to detect and characterize the presence of this constituent within the cladding. Presently, hydrides are evaluated using destructive examination. If nondestructive evaluation techniques can be used to detect and characterize the hydrides, the potential exists to significantly increase test sample coverage while reducing evaluation time and cost. To demonstrate the viability this approach, an initial evaluation of eddy current and ultrasonic techniques were performed to demonstrate the basic ability to these techniques to detect hydrides or their effects on the microstructure. Conventional continuous wave eddy current techniques were applied to zirconium based cladding test samples thermally processed with hydrogen gas to promote the absorption of hydrogen and subsequent formation of hydrides. The results of the evaluation demonstrate that eddy current inspection approaches have the potential to detect both the physical damage induced by hydrides, e.g. blisters and cracking, as well as the combined effects of absorbed hydrogen and hydride precipitates on the electrical properties of the zirconium alloy. Similarly, measurements of ultrasonic wave velocities indicate changes in the elastic properties resulting from the combined effects of absorbed hydrogen and hydride precipitates as well as changes in geometry in regions of severe degradation. However, for both approaches, the signal responses intended to make the desired measurement incorporate a number of contributing parameters. These contributing factors need to be recognized and a means to control them or separate their contributions will be required to obtain the desired information.

Dennis C. Kunerth

2014-09-01T23:59:59.000Z

293

Diagnostic technique for measuring plasma parameters near surfaces in radio frequency discharges  

E-Print Network [OSTI]

Diagnostic technique for measuring plasma parameters near surfaces in radio frequency discharges September 1998 A plasma diagnostic technique for measuring the electron density, electron temperature the plasma parameters. The technique is demonstrated by implementing the diagnostic in a computer model

Kushner, Mark

294

Abstract--The mainly used islanding detection techniques may be classified as active and passive techniques. Passive  

E-Print Network [OSTI]

of distributed generation (DG), when the passive technique cannot have a clear discrimination between islanding islanding of distribution systems with DGs. Index Terms-- Distributed generation, islanding detection, real power shift, voltage change. I. INTRODUCTION here is a renewed interest in the distributed generation

Mahat, Pukar

295

E-Print Network 3.0 - angular correlation technique Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Collection: Geosciences 2 MIMO CAPACITY OF MULTIPATH-CLUSTERED CHANNELS USING FOURIER TRANSFORM TECHNIQUES Summary: Fourier transform techniques, it is shown that the spatial...

296

Novel use of 4D Monitoring Techniques to Improve Reservoir Longevity...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Novel use of 4D Monitoring Techniques to Improve Reservoir Longevity and Productivity in Enhanced Geothermal Systems Novel use of 4D Monitoring Techniques to Improve Reservoir...

297

E-Print Network 3.0 - adaptive resonator techniques Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

techniques, and the resonance suppressed without otherwise... and resonance suppression TAY, T,, MOORE,J., and HOROWITZ, R,, 1989, Indirect adaptive techniques for fixed... INT....

298

E-Print Network 3.0 - advanced qexafs techniques Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

qexafs techniques Search Powered by Explorit Topic List Advanced Search Sample search results for: advanced qexafs techniques Page: << < 1 2 3 4 5 > >> 1 PLEASE SCROLL DOWN FOR...

299

E-Print Network 3.0 - advanced experimental techniques Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

techniques Search Powered by Explorit Topic List Advanced Search Sample search results for: advanced experimental techniques Page: << < 1 2 3 4 5 > >> 1 EARTH-438: Advanced Topics...

300

E-Print Network 3.0 - advanced imaging techniques Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

techniques Search Powered by Explorit Topic List Advanced Search Sample search results for: advanced imaging techniques Page: << < 1 2 3 4 5 > >> 1 Photogrammetric & LiDAR Data...

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

E-Print Network 3.0 - advanced analysis techniques Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

techniques Search Powered by Explorit Topic List Advanced Search Sample search results for: advanced analysis techniques Page: << < 1 2 3 4 5 > >> 1 Advanced Photogrammetric and...

302

E-Print Network 3.0 - algebraic reconstruction technique Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

worked on the limited view reconstruction problem. State of the art techniques for limited view... our technique, we have ... Source: Corso, Jason J. - Department of Computer...

303

Microfluidic advantage : novel techniques for protein folding and oxygen control in cell cultures  

E-Print Network [OSTI]

Novel Techniques for Protein Folding and Oxygen Control inTemperature Jump System to Study Fast Protein FoldingNovel Techniques for Protein Folding and Oxygen Control in

Polinkovsky, Mark E.; Polinkovsky, Mark E.

2012-01-01T23:59:59.000Z

304

Signal Processing Techniques for Data Reduction and Event Recognition in Cough Counting.  

E-Print Network [OSTI]

??This thesis presents novel techniques for the reduction of audio recordings and signal processing techniques as part of cough recognition. Evidence collected shows the reduction (more)

Barton, Antony James

2013-01-01T23:59:59.000Z

305

Introduction to Commercial Building Control Strategies and Techniques for Demand Response -- Appendices  

E-Print Network [OSTI]

for Demand Response in New and Existing Commercial BuildingsBuilding Control Strategies and Techniques for Demand Response -Building Control Strategies and Techniques for Demand Response

Motegi, N.

2011-01-01T23:59:59.000Z

306

The application of molecular genetics techniques to bioremediation processes  

SciTech Connect (OSTI)

Bioremediation is a process in which microorganisms are used to degrade toxic compounds. This technology has been used successfully to clean up a number of organic wastes including diesel fuel and creosote. Due to the increasingly stringent regulations affecting contaminated sites, a number of new technologies are being pursued that attempt to remediate wastes in situ, thus leaving the wastes undisturbed. One such pursuit has led to the proposal that molecular genetic techniques can be used to assess the genetic ecology of a contaminated waste site and that, subsequently, one can manipulate the indigenous microbial population so as to increase the biodegradation rate. Such a technology is heavily dependent on molecular genetic technique such as gene probing to determine the presence, distribution and ability of microbial genes to be expressed/amplified in the contaminated soil or water matrix. 117 refs., 14 figs., 13 tabs.

Alpert, S. (Alpert (S.), Palo Alto, CA (USA))

1989-12-01T23:59:59.000Z

307

Advanced Techniques for Power System Identification from Measured Data  

SciTech Connect (OSTI)

Time-synchronized measurements provide rich information for estimating a power-system's electromechanical modal properties via advanced signal processing. This information is becoming critical for the improved operational reliability of interconnected grids. A given mode's properties are described by its frequency, damping, and shape. Modal frequencies and damping are useful indicators of power-system stress, usually declining with increased load or reduced grid capacity. Mode shape provides critical information for operational control actions. This project investigated many advanced techniques for power system identification from measured data focusing on mode frequency and damping ratio estimation. Investigators from the three universities coordinated their effort with Pacific Northwest National Laboratory (PNNL). Significant progress was made on developing appropriate techniques for system identification with confidence intervals and testing those techniques on field measured data and through simulation. Experimental data from the western area power system was provided by PNNL and Bonneville Power Administration (BPA) for both ambient conditions and for signal injection tests. Three large-scale tests were conducted for the western area in 2005 and 2006. Measured field PMU (Phasor Measurement Unit) data was provided to the three universities. A 19-machine simulation model was enhanced for testing the system identification algorithms. Extensive simulations were run with this model to test the performance of the algorithms. University of Wyoming researchers participated in four primary activities: (1) Block and adaptive processing techniques for mode estimation from ambient signals and probing signals, (2) confidence interval estimation, (3) probing signal design and injection method analysis, and (4) performance assessment and validation from simulated and field measured data. Subspace based methods have been use to improve previous results from block processing techniques. Bootstrap techniques have been developed to estimate confidence intervals for the electromechanical modes from field measured data. Results were obtained using injected signal data provided by BPA. A new probing signal was designed that puts more strength into the signal for a given maximum peak to peak swing. Further simulations were conducted on a model based on measured data and with the modifications of the 19-machine simulation model. Montana Tech researchers participated in two primary activities: (1) continued development of the 19-machine simulation test system to include a DC line; and (2) extensive simulation analysis of the various system identification algorithms and bootstrap techniques using the 19 machine model. Researchers at the University of Alaska-Fairbanks focused on the development and testing of adaptive filter algorithms for mode estimation using data generated from simulation models and on data provided in collaboration with BPA and PNNL. There efforts consist of pre-processing field data, testing and refining adaptive filter techniques (specifically the Least Mean Squares (LMS), the Adaptive Step-size LMS (ASLMS), and Error Tracking (ET) algorithms). They also improved convergence of the adaptive algorithms by using an initial estimate from block processing AR method to initialize the weight vector for LMS. Extensive testing was performed on simulated data from the 19 machine model. This project was also extensively involved in the WECC (Western Electricity Coordinating Council) system wide tests carried out in 2005 and 2006. These tests involved injecting known probing signals into the western power grid. One of the primary goals of these tests was the reliable estimation of electromechanical mode properties from measured PMU data. Applied to the system were three types of probing inputs: (1) activation of the Chief Joseph Dynamic Brake, (2) mid-level probing at the Pacific DC Intertie (PDCI), and (3) low-level probing on the PDCI. The Chief Joseph Dynamic Brake is a 1400 MW disturbance to the system and is injected for a ha

Pierre, John W.; Wies, Richard; Trudnowski, Daniel

2008-11-25T23:59:59.000Z

308

Optical fiber technique as a tool to improve combustion efficiency  

SciTech Connect (OSTI)

A multi-optical fiber technique is presented, which enables one to detect the flame propagation during non-knocking and knocking conditions in real production engines. The measurement technique is appropriate to detect knock onset locations and to describe the propagation of knocking reaction fronts. With this knowledge, the combustion chamber shape can be optimized, leading to a better knock resistance and higher combustion efficiencies. Results of flame propagation under non-knocking and knocking engine operating conditions are presented. In addition, correlations between knock onset locations and areas in which knock damage occurs are shown for different engines. Presented are the effects of combustion chamber modifications on the combustion efficiency, based on the analysis of the optical fiber measurements.

Spicher, U.; Krebs, R.

1990-01-01T23:59:59.000Z

309

On the selection of dimension reduction techniques for scientific applications  

SciTech Connect (OSTI)

Many dimension reduction methods have been proposed to discover the intrinsic, lower dimensional structure of a high-dimensional dataset. However, determining critical features in datasets that consist of a large number of features is still a challenge. In this paper, through a series of carefully designed experiments on real-world datasets, we investigate the performance of different dimension reduction techniques, ranging from feature subset selection to methods that transform the features into a lower dimensional space. We also discuss methods that calculate the intrinsic dimensionality of a dataset in order to understand the reduced dimension. Using several evaluation strategies, we show how these different methods can provide useful insights into the data. These comparisons enable us to provide guidance to a user on the selection of a technique for their dataset.

Fan, Y J; Kamath, C

2012-02-17T23:59:59.000Z

310

A Flexural Mode Tuning Technique for Membraned Boiler Tubing  

SciTech Connect (OSTI)

Corrosion of tubing used in black-liquor recovery boilers is a major concern in all pulp and paper mills. Extensive corrosion in recovery boiler tubes can result in a significant safety and environmental hazard. Considerable plant resources are expended to inspect recovery boiler tubing. Currently, visual and ultrasonic inspections are primarily used during the annual maintenance shutdown to monitor corrosion rates and cracking of tubing. This project is developing guided acoustic waves for use on recovery boiler tubing. The feature of this acoustic technique is its cost-effectiveness in inspecting long lengths of tubes from a single inspection point. A piezoelectric or electromagnetic transducer induces guided waves into the tubes. The transducer detects fireside defects from the cold side or fireside of the tube. Cracking and thinning on recovery boiler tubes have been detected with this technique in both laboratory and field applications.

Quarry, M J; Chinn, D J; Rose, J L

2005-03-21T23:59:59.000Z

311

Techniques for estimating flood hydrographs for ungaged urban watersheds  

SciTech Connect (OSTI)

The Clark Method, modified slightly, was used to develop a synthetic dimensionless hydrograph that can be used to estimate flood hydrographs for ungaged urban watersheds. Application of the technique results in a typical (average) flood hydrograph for a given peak discharge. Input necessary to apply the technique is an estimate of basin lagtime and the recurrence interval peak discharge. Equations for this purpose were obtained from a recent nationwide study on flood frequency in urban watersheds. A regression equation was developed which relates flood volumes to drainage area size, basin lagtime, and peak discharge. This equation is useful where storage of floodwater may be a part of design or flood prevention. 6 refs., 17 figs., 5 tabs.

Stricker, V.A.; Sauer, V.B.

1982-04-01T23:59:59.000Z

312

Characterization of microstructure with low frequency electromagnetic techniques  

SciTech Connect (OSTI)

A new computational method for characterizing the relationship between surface crystallography and electrical conductivity in anisotropic materials with low frequency electromagnetic techniques is presented. The method is discussed from the standpoint of characterizing the orientation of a single grain, as well as characterizing statistical information about grain ensembles in the microstructure. Large-area electron backscatter diffraction (EBSD) data was obtained and used in conjunction with a synthetic aperture approach to simulate the eddy current response of beta annealed Ti-6Al-4V. Experimental eddy current results are compared to the computed eddy current approximations based on electron backscatter diffraction (EBSD) data, demonstrating good agreement. The detectability of notches in the presence of noise from microstructure is analyzed with the described simulation method and advantages and limitations of this method are discussed relative to other NDE techniques for such analysis.

Cherry, Matthew R.; Sathish, Shamachary [University of Dayton Research Institute, Structural Integrity Division, 300 College Park, Dayton, OH 45469-0020 (United States); Pilchak, Adam L.; Blodgett, Mark P. [Air Force Research Laboratory, Materials and Manufacturing Directorate (AFRL/RXCM), 2230 10th St., WPAFB, OH 45433 (United States); Cherry, Aaron J. [Southwest Ohio Council for Higher Education, 3155 Research Blvd., Suite 204, Dayton, OH 45420-4015 (United States)

2014-02-18T23:59:59.000Z

313

A Pulse Shape Analysis Technique for the MAJORANA Experiment  

SciTech Connect (OSTI)

In order to achieve background count rates sufficiently low as to allow the observation of rare events such as neutrinoless double beta (0 ) decay, background suppression techniques are routinely employed. In this paper we present details of a novel Pulse Shape Analysis algorithm which allows single-site events such as 0 decay to be distinguished from multi site background events. The algorithm, which is based on the event by event 2 fitting of experimental signals to a basis data set of unique single site pulse shapes, has been developed through simulation studies and tested experimentally using a Broad Energy Germanium detector. It is found experimentally that the technique is able to successfully identify and reject 99% of multi site events in the single escape peak associated with the gamma decay of 208Tl, whilst maintaining a survival probability of 98% for '0 like' double escape peak events.

Cooper, Reynold J [ORNL; Radford, David C [ORNL; Lagergren, K. [Joint Institute for Heavy Ion Research, Oak Ridge; Colaresi, James F. [Canberra Industries, Inc., Meriden, CT; Darken, Larry [Canberra Industries, Inc., Oak Ridge, TN; Henning, Reyco [University of North Carolina, Chapel Hill; Marino, Michael [University of Washington, Seattle; Yocum, K. Michael [Canberra Industries, Inc., Meriden, CT

2011-01-01T23:59:59.000Z

314

A digital CDS technique and the performance testing  

E-Print Network [OSTI]

Readout noise is a critical parameter for characterizing the performance of charge-coupled devices (CCDs), which can be greatly reduced by the correlated double sampling (CDS) circuit. However, conventional CDS circuit inevitably introduces new noises since it consists of several active analog components such as operational amplifiers. This paper proposes a digital CDS circuit technique, which transforms the pre-amplified CCD signal into a train of digital presentations by a high-speed data acquisition card directly without the noisy CDS circuit first, then implement the digital CDS algorithm through numerical method. The readout noise of 3.3 e$^{-}$ and the energy resolution of 121 eV@5.9keV can be achieved via the digital CDS technique.

Xiao-Yan Liu; Jing-Bin Lu; Yan-Ji Yang; Bo Lu; Yu-Sa Wang; Yu-Peng Xu; Wei-Wei Cui; Wei Li; Mao-Shun Li; Juan Wang; Da-Wei Han; Tian-Xiang Chen; Jia Huo; Wei Hu; Yi Zhang; Yue Zhu; Zi-Liang Zhang; Guo-He Yin; Yu Wang; Zhong-Yi Zhao; Yan-Hong Fu; Ya Zhang; Ke-Yan Ma; Yong Chen

2014-10-09T23:59:59.000Z

315

Techniques For Microfabricating Coils For Microelectromechanical Systems Applications  

SciTech Connect (OSTI)

The advanced technology necessary for building future space exploration vehicles includes microfabricated coils for making possible self-inductances integrated with other passive and active electronic components. Integrated inductances make possible significant improvements in reliability over the traditional arrangement of using external discrete inductances, as well as allowing significant size (volume) reductions (also important in space vehicles). Two possible fabrication techniques (one using proprietary branded 'Foturan' glass, the other using silicon wafer substrates) for microscopic coils are proposed, using electroplating into channels. The techniques have been evaluated for fabricating the planar electrical coils needed for typical microelectromechanical systems applications. There remain problems associated with processing using 'Foturan' glass, but coil fabrication on silicon wafers was successful. Fabrication methods such as these are expected to play an important part in the development of systems and subsystems for forthcoming space exploration missions.

Woods, R. C. [Louisiana State University, 102A Department of Electrical and Computer Engineering, South Campus Drive, Baton Rouge, LA 70803-5901 (United States); Powell, A. L. [University of Sheffield, Sheffield S10 2TN (United Kingdom)

2008-01-21T23:59:59.000Z

316

A technique for accelerating the convergence of restarted GMRES  

SciTech Connect (OSTI)

We have observed that the residual vectors at the end of each restart cycle of restarted GMRES often alternate direction in a cyclic fashion, thereby slowing convergence. We present a new technique for accelerating the convergence of restarted GMRES by disrupting this alternating pattern. The new algorithm resembles a full conjugate gradient method with polynomial preconditioning, and its implementation requires minimal changes to the standard restarted GMRES algorithm.

Baker, A H; Jessup, E R; Manteuffel, T

2004-03-09T23:59:59.000Z

317

Nonlinear system identification using the MRAS technique and hyperstability concepts  

E-Print Network [OSTI]

is presented. The algorithm is theoretically derived and proved hyperstable by extension of previous linear, hyperstabie response error MRAS identification techniques. Generalization and unification of pre- vious empirical nonlinear identification... Identification - Application of Hyperstability An important MRAS identification approach is known as "parallel MRAS" or response error (RE), Fig. 4. This method of identification was developed by Landau [17-18], Hang [15-16], and Johnson [19...

Schatte, Alvin Robert

1982-01-01T23:59:59.000Z

318

Experimental Techniques In The Recording And Display Of Archaeological Materials  

E-Print Network [OSTI]

of MASTER OF ARTS Approved by: Chair of Committee, C. Wayne Smith Committee Members, Donny L. Hamilton Donald H. House Head of Department, Donny L. Hamilton May 2011 Major Subject: Anthropology iii ABSTRACT Experimental Techniques... and friends becomes an indispensible resource. First I would like to thank each member of my advisory committee; Dr. Smith for his technical knowledge, unique solutions to odd problems, and his consistently optimistic attitude, Dr. Hamilton for his...

Koepnick, Samuel

2011-08-08T23:59:59.000Z

319

Observational Techniques for Detecting Planets in Binary Systems  

E-Print Network [OSTI]

Searches for planets in close binary systems explore the degree to which stellar multiplicity inhibits or promotes planet formation. There is a degeneracy between planet formation models when only systems with single stars are studied--several mechanisms appear to be able to produce such a final result. This degeneracy is lifted by searching for planets in binary systems; the resulting detections (or evidence of non-existence) of planets in binaries isolates which models may contribute to how planets form in nature. In this chapter, we consider observational efforts to detect planetary companions to binary stars in two types of hierarchical planet-binary configurations: first ``S-type'' planets which orbit just one of the stars, with the binary period being much longer than the planet's; second, ``P-type'' or circumbinary planets, where the planet simultaneously orbits both stars, and the planetary orbital period is much longer than that of the binary. The S-type planet finding techniques are different for binaries that can or cannot be spatially resolved. For wider systems, techniques reviewed include dualstar interferometric differential astrometry and precision radial velocities. Alternatively, unresolved binaries can be studied using modified dualstar "PHASES-style" differential astrometry or a modification of the radial velocity technique for composite spectra. Should a fortunately aligned--but still long period--binary be found, eclipse timing can also reveal the presence of S-type planets. Methods for detecting P-type planets include the composite-spectra variant of the radial velocity technique and eclipse timing.

Matthew W. Muterspaugh; Maciej Konacki; Benjamin F. Lane; Eric Pfahl

2007-05-21T23:59:59.000Z

320

Real-Time SCADA Cyber Protection Using Compression Techniques  

SciTech Connect (OSTI)

The Department of Energys Office of Electricity Delivery and Energy Reliability (DOE-OE) has a critical mission to secure the energy infrastructure from cyber attack. Through DOE-OEs Cybersecurity for Energy Delivery Systems (CEDS) program, the Idaho National Laboratory (INL) has developed a method to detect malicious traffic on Supervisory, Control, and Data Acquisition (SCADA) network using a data compression technique. SCADA network traffic is often repetitive with only minor differences between packets. Research performed at the INL showed that SCADA network traffic has traits desirable for using compression analysis to identify abnormal network traffic. An open source implementation of a Lempel-Ziv-Welch (LZW) lossless data compression algorithm was used to compress and analyze surrogate SCADA traffic. Infected SCADA traffic was found to have statistically significant differences in compression when compared against normal SCADA traffic at the packet level. The initial analyses and results are clearly able to identify malicious network traffic from normal traffic at the packet level with a very high confidence level across multiple ports and traffic streams. Statistical differentiation between infected and normal traffic level was possible using a modified data compression technique at the 99% probability level for all data analyzed. However, the conditions tested were rather limited in scope and need to be expanded into more realistic simulations of hacking events using techniques and approaches that are better representative of a real-world attack on a SCADA system. Nonetheless, the use of compression techniques to identify malicious traffic on SCADA networks in real time appears to have significant merit for infrastructure protection.

Lyle G. Roybal; Gordon H Rueff

2013-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Improved LWR Cladding Performance by EPD Surface Modification Technique  

SciTech Connect (OSTI)

This project will utilize the electro-phoretic deposition technique (EPD) in conjunction with nanofluids to deposit oxide coatings on prototypic zirconium alloy cladding surfaces. After demonstrating that this surface modification is reproducible and robust, the team will subject the modified surface to boiling and corrosion tests to characterize the improved nucleate boiling behavior and superior corrosion performance. The scope of work consists of the following three tasks: The first task will employ the EPD surface modification technique to coat the surface of a prototypic set of zirconium alloy cladding tube materials (e.g. Zircaloy and advanced alloys such as M5) with a micron-thick layer of zirconium oxide nanoparticles. The team will characterize the modified surface for uniformity using optical microscopy and scanning-electron microscopy, and for robustness using standard hardness measurements. After zirconium alloy cladding samples have been prepared and characterized using the EPD technique, the team will begin a set of boiling experiments to measure the heat transfer coefficient and critical heat flux (CHF) limit for each prepared sample and its control sample. This work will provide a relative comparison of the heat transfer performance for each alloy and the surface modification technique employed. As the boiling heat transfer experiments begin, the team will also begin corrosion tests for these zirconium alloy samples using a water corrosion test loop that can mimic light water reactor (LWR) operational environments. They will perform extended corrosion tests on the surface-modified zirconium alloy samples and control samples to examine the robustness of the modified surface, as well as the effect on surface oxidation

Michael Corradini; Kumar Sridharan

2012-11-26T23:59:59.000Z

322

Synthesis of zirconium oxide nanoparticle by sol-gel technique  

SciTech Connect (OSTI)

Zirconium oxide nanoparticle is synthesized using sol-gel technique. Various mole ratio of ammonia solution and nitric acid relative to zirconium propoxide is added in the reaction to study the effect on the crystallinity and particle size on zirconium oxide particle. Zirconium oxide synthesized with nitric acid have the smallest particle size under FESEM image and show the increasing formation of crystalline tetragonal phase under XRD diffractogram.

Lim, H. S.; Ahmad, A.; Hamzah, H. [School of Chemical Science and Food Technology, Faculty of Science and Technology, National University of Malaysia, 43600 Bangi (Malaysia)

2013-11-27T23:59:59.000Z

323

Comparative cytotaxonomy in the tribe Bovini studied by banding techniques  

E-Print Network [OSTI]

Committee: Dr. James E. Womack Chromosomes of eight species of the tribe Bovini were studied by G ? banding, C ? banding and silver staining techniques. The results of this comparative cytogenetic study support the theory that Robertsonian fusion... in the tribe Bovini whose species appear to differ by a series of centromeric fusions. The phylogenetic tree derived from the cytogenetic data of this study is not consistent with morphological and behavioral trees previously described for the tribe Bovini...

Rich, Donna Carol

2012-06-07T23:59:59.000Z

324

Geophysical Techniques for Monitoring CO2 Movement During Sequestration  

SciTech Connect (OSTI)

The relative merits of the seismic, gravity, and electromagnetic (EM) geophysical techniques are examined as monitoring tools for geologic sequestration of carbon dioxide (CO{sub 2}). This work does not represent an exhaustive study, but rather demonstrates the capabilities of a number of geophysical techniques for two synthetic modeling scenarios. The first scenario represents combined CO{sub 2} enhanced oil recovery (EOR) and sequestration in a producing oil field, the Schrader Bluff field on the north slope of Alaska, USA. EOR/sequestration projects in general and Schrader Bluff in particular represent relatively thin injection intervals with multiple fluid components (oil, hydrocarbon gas, brine, and CO{sub 2}). This model represents the most difficult end member of a complex spectrum of possible sequestration scenarios. The time-lapse performance of seismic, gravity, and EM techniques are considered for the Schrader Bluff model. The second scenario is a gas field that in general resembles conditions of Rio Vista reservoir in the Sacramento Basin of California. Surface gravity, and seismic measurements are considered for this model.

Erika Gasperikova; G. Michael Hoversten

2005-11-15T23:59:59.000Z

325

New experimental techniques with the split Hopkinson pressure bar  

SciTech Connect (OSTI)

The split Hopkinson pressure bar or Kolsky bar has provided for many years a technique for performing compression tests at strain rates approaching 10/sup 4/ s/sup -1/. At these strain rates, the small dimensions possible in a compression test specimen give an advantage over a dynamic tensile test by allowing the stress within the specimen to equilibrate within the shortest possible time. The maximum strain rates possible with this technique are limited by stress wave propagation in the elastic pressure bars as well as in the deforming specimen. This subject is reviewed in this paper, and it is emphasized that a slowly rising excitation is preferred to one that rises steeply. Experimental techniques for pulse shaping and a numerical procedure for correcting the raw data for wave dispersion in the pressure bars are presented. For tests at elevated temperature a bar mover apparatus has been developed which effectively brings the cold pressure bars into contact with the specimen, which is heated with a specially designed furnace, shortly before the pressure wave arrives. This procedure has been used successfully in tests at temperatures as high as 1000/sup 0/C.

Frantz, C.E.; Follansbee, P.S.; Wright, W.J.

1984-01-01T23:59:59.000Z

326

A survey of reflectometry techniques with applications to TFTR  

SciTech Connect (OSTI)

This report presents a review of reflectometry with particular attention to eXtraordinary mode (X-mode) reflectometry using the novel technique of dual frequency differential phase. The advantage of using an X-mode wave is that it can probe the edge of the plasma with much higher resolution and using a much smaller frequency range than with the Ordinary mode (O-Mode). The general problem with previous full phase reflectometry techniques is that of keeping track of the phase (on the order of 1000 fringes) as the frequency is swept over the band. The dual frequency phase difference technique has the advantage that since it is keeping track of the phase difference of two frequencies with a constant frequency separation, the fringe counting is on the order of only 3 to 5 fringes. This fringe count, combined with the high resolution of the X-mode wave and the small plasma access requirements of reflectometry, make X-mode reflectometry a very attractive diagnostic for today`s experiments and future fusion devices.

Collazo, I.; Stacey, W.M. [Georgia Inst. of Tech., Atlanta, GA (United States); Wilgen, J.; Hanson, G.; Bigelow, T.; Thomas, C.E. [Oak Ridge National Lab., TN (United States); Bretz, N. [Princeton Univ., NJ (United States). Plasma Physics Lab.

1993-12-01T23:59:59.000Z

327

Technique for rapid establishment of American lotus in remediation efforts  

SciTech Connect (OSTI)

A technique for increasing the establishment rate of American lotus (Nelumbo lutea) and simplifying planting was developed as part of a pond remediation project. Lotus propagation techniques typically require scarification of the seed, germination in heated water, and planting in nursery containers. Then mature (~ 1 yr) nursery-grown stock is transferred to planting site or scarified seed are broadcast applied. Mature plants should grow more quickly, but can be sensitive to handling, require more time to plant, and cost more. Scarified seeds are easier to plant and inexpensive, but have a lag time in growth, can fail to germinate, and can be difficult to site precisely. We developed an intermediate technique using small burlap bags that makes planting easier, provides greater germination success, and avoids lag time in growth. Data on survival and growth from experiments using mature stock, scarified seeds, and bag lotus demonstrate that bag lotus grow rapidly in a variety of conditions, have a high survival rate, can be processed and planted easily and quickly, and are very suitable for a variety of remediation projects

Ryon, Michael G [ORNL; Fortner, Allison M [ORNL; Goins, Kenneth N [ORNL; Jett, Robert T [ORNL; McCracken, Kitty [ORNL; Morris, Gail Wright [ORNL; Riazzi, Adam [Lincoln County HS, Hamlin WV; Roy, W Kelly [ORNL

2013-01-01T23:59:59.000Z

328

Evaluation of flow capture techniques for measuring HVAC grilleairflows  

SciTech Connect (OSTI)

This paper discusses the accuracy of commercially available flow hoods for residential applications. Results of laboratory and field tests indicate these hoods can be inadequate to measure airflows in residential systems, and there can be large measurement discrepancies between different flow hoods. The errors are due to poor calibrations, sensitivity of the hoods to grille airflow non-uniformities, and flow changes from added flow resistance. It is possible to obtain reasonable results using some flow hoods if the field tests are carefully done, the grilles are appropriate, and grille location does not restrict flow hood placement. We also evaluated several simple flow capture techniques for measuring grille airflows that could be adopted by the HVAC industry and homeowners as simple diagnostics. These simple techniques can be as accurate as commercially available devices. Our test results also show that current calibration procedures for flow hoods do not account for field application problems. As a result, agencies such as ASHRAE or ASTM need to develop a new standard for flow hood calibration, along with a new measurement standard to address field use of flow capture techniques.

Walker, Iain S.; Wray, Craig P.

2002-11-01T23:59:59.000Z

329

TRADITIONAL AND DIGITAL AUTORADIOGRAPHY TECHNIQUES: A COMPARISON STUDY  

SciTech Connect (OSTI)

This report fulfills the FY 2006 Enhanced Surveillance Campaign Level 3 milestones for Task TSR 11.1 as defined in the execution plan [1, 2]. The purpose of this task is to reduce the cycle time necessary to complete analytical evaluations required for surveillance of reservoirs. The development of the digital autoradiography system supports this task. The digital autoradiography system is currently operational and ready for implementation in reservoir surveillance performed in the Materials Test Facility (MTF) at Savannah River Site (SRS). SRS requests design agency (Los Alamos National Laboratory and Sandia National Laboratory) concurrence for the implementation of this system and on the establishment, in conjunction with the Savannah River National Laboratory (SRNL), of the implementation requirements for this system. Stainless steel tritium reservoirs and pinch welded tubes, which have been exposed to tritium for a prolonged period, are destructively evaluated at the end of their service lives for a variety of reasons. One requirement of this evaluation is to assess the tritium diffusion into the reservoir material. The current method used to determine the geometry and depth of tritium penetration is autoradiography. This technique employs a photographic emulsion and has been effective for a number of years. The primary disadvantage of this technique is the time required to obtain results. The success of the traditional technique is dependent on many variables, such as the proficiency of the operators in conducting sample preparation, the geometry of the sample and the shelf life of the photographic chemicals. If results are not satisfactory, several repetitions are often required and usually add weeks to the total analysis time for the sample. Due to the extensive time required for the liquid emulsion autoradiography method, a new, faster technique was desired. Personnel from the Savannah River National Laboratory (SRNL) have been working on a system based on digital imaging technology to replace the current method. The purpose of this report is to provide a description of the current method, a description of the equipment for the new digital method and its capabilities, and a direct comparison of the results between the existing and proposed techniques. The advantages of the digital method is the reduced time of exposure (from 24 hours to around 10 minutes), increased sample throughput, reduced rework of samples, and the elimination of chemical processing.

Gibbs, K; Carol Kestin, C

2006-08-29T23:59:59.000Z

330

Two Rossi-[alpha] techniques for measuring the effective delayed neutron fraction  

SciTech Connect (OSTI)

Two techniques for measuring the effective delayed neutron fraction have been developed. The techniques are based on a combination of the Rossi-[alpha]technique and the source-multiplication technique. They require minimal knowledge of the assembly, use variables that can be measured, and are independent of the detector efficiency and the neutron lifetime.

Spriggs, G.D. (Los Alamos National Lab., NM (United States))

1993-02-01T23:59:59.000Z

331

A workshop on The application of non-and micro-destructive analysis techniques  

E-Print Network [OSTI]

of the art for XRF techniques Andreas Karydas (NCSR, Demokritos) Part 2: `Strategic' utilization of XRF

Guo, Zaoyang

332

Objective Intelligibility Prediction of Speech by Combining Correlation and Distortion based Techniques  

E-Print Network [OSTI]

of these techniques has not been found satisfactory for measuring the speech intelligibility of speech enhancement of speech enhancement. We then propose to com- bine these correlation-based techniques with spectral enhancement, correlation-based techniques, spectral distance-based techniques. 1. Introduction In speech

333

PVUSA instrumentation and data analysis techniques for photovoltaic systems  

SciTech Connect (OSTI)

The Photovoltaics for Utility Scale Applications (PVUSA) project tests two types of PV systems at the main test site in Davis, California: new module technologies fielded as 20-kW Emerging Module Technology (EMT) arrays and more mature technologies fielded as 70- to 500-kW turnkey Utility-Scale (US) systems. PVUSA members have also installed systems in their service areas. Designed appropriately, data acquisition systems (DASs) can be a convenient and reliable means of assessing system performance, value, and health. Improperly designed, they can be complicated, difficult to use and maintain, and provide data of questionable validity. This report documents PVUSA PV system instrumentation and data analysis techniques and lessons learned. The report is intended to assist utility engineers, PV system designers, and project managers in establishing an objective, then, through a logical series of topics, facilitate selection and design of a DAS to meet the objective. Report sections include Performance Reporting Objectives (including operational versus research DAS), Recommended Measurements, Measurement Techniques, Calibration Issues, and Data Processing and Analysis Techniques. Conclusions and recommendations based on the several years of operation and performance monitoring are offered. This report is one in a series of 1994--1995 PVUSA reports documenting PVUSA lessons learned at the demonstration sites in Davis and Kerman, California. Other topical reports address: five-year assessment of EMTs; validation of the Kerman 500-kW grid support PV plant benefits; construction and safety experience in installing and operating PV systems; balance-of-system design and costs; procurement, acceptance, and rating practices for PV power plants; experience with power conditioning units and power quality.

Newmiller, J.; Hutchinson, P.; Townsend, T.; Whitaker, C.

1995-10-01T23:59:59.000Z

334

Digital I and C system upgrade integration technique  

SciTech Connect (OSTI)

This work developed an integration technique for digital I and C system upgrade, the utility can replace the I and C systems step by step systematically by this method. Inst. of Nuclear Energy Research (INER) developed a digital Instrumentation and Control (I and C) replacement integration technique on the basis of requirement of the three existing nuclear power plants (NPPs), which are Chin-Shan (CS) NPP, Kuo-Sheng (KS) NPP, and Maanshan (MS) NPP, in Taiwan, and also developed the related Critical Digital Review (CDR) Procedure. The digital I and C replacement integration technique includes: (I) Establishment of Nuclear Power Plant Digital Replacement Integration Guideline, (2) Preliminary Investigation on I and C System Digitalization, (3) Evaluation on I and C System Digitalization, and (4) Establishment of I and C System Digitalization Architectures. These works can be a reference for performing I and C system digital replacement integration of the three existing NPPs of Taiwan Power Company (TPC). A CDR is the review for a critical system digital I and C replacement. The major reference of this procedure is EPRI TR- 1011710 (2005) 'Handbook for Evaluating Critical Digital Equipment and Systems' which was published by the Electric Power Research Inst. (EPRI). With this document, INER developed a TPC-specific CDR procedure. Currently, CDR becomes one of the policies for digital I and C replacement in TPC. The contents of this CDR procedure include: Scope, Responsibility, Operation Procedure, Operation Flow Chart, CDR review items. The CDR review items include the comparison of the design change, Software Verification and Validation (SVandV), Failure Mode and Effects Analysis (FMEA), Evaluation of Diversity and Defense-in-depth (D3), Evaluation of Watchdog Timer, Evaluation of Electromagnetic Compatibility (EMC), Evaluation of Grounding for System/Component, Seismic Evaluation, Witness and Inspection, Lessons Learnt from the Digital I and C Failure Events. A solid review can assure the quality of the digital I and C system replacement. (authors)

Huang, H. W. [Inst. of Nuclear Energy Research (INER), No. 1000, Wenhua Road, Chiaan Village, Longtan Township, Taoyuan County, 32546, Taiwan (China); Shih, C. [Inst. of Nuclear Engineering and Science, National Tsing Hua Univ., 101, Sec. 2, Kuang Fu Rd, Hsinchu, Taiwan (China); Wang, J. R. [Inst. of Nuclear Energy Research (INER), No. 1000, Wenhua Road, Chiaan Village, Longtan Township, Taoyuan County, 32546, Taiwan (China); Huang, K. C. [Inst. of Nuclear Engineering and Science, National Tsing Hua Univ., 101, Sec. 2, Kuang Fu Rd, Hsinchu, Taiwan (China)

2012-07-01T23:59:59.000Z

335

Fringe biasing: A variance reduction technique for optically thick meshes  

SciTech Connect (OSTI)

Fringe biasing is a stratified sampling scheme applicable to Monte Carlo thermal radiation transport codes. The thermal emission source in optically thick cells is partitioned into separate contributions from the cell interiors (where the likelihood of the particles escaping the cells is virtually zero) and the 'fringe' regions close to the cell boundaries. Thermal emission in the cell interiors can now be modelled with fewer particles, the remaining particles being concentrated in the fringes so that they are more likely to contribute to the energy exchange between cells. Unlike other techniques for improving the efficiency in optically thick regions (such as random walk and discrete diffusion treatments), fringe biasing has the benefit of simplicity, as the associated changes are restricted to the sourcing routines with the particle tracking routines being unaffected. This paper presents an analysis of the potential for variance reduction achieved from employing the fringe biasing technique. The aim of this analysis is to guide the implementation of this technique in Monte Carlo thermal radiation codes, specifically in order to aid the choice of the fringe width and the proportion of particles allocated to the fringe (which are interrelated) in multi-dimensional simulations, and to confirm that the significant levels of variance reduction achieved in simulations can be understood by studying the behaviour for simple test cases. The variance reduction properties are studied for a single cell in a slab geometry purely absorbing medium, investigating the accuracy of the scalar flux and current tallies on one of the interfaces with the surrounding medium. (authors)

Smedley-Stevenson, R. P. [AWE PLC, Aldermaston Reading, Berkshire, RG7 4PR (United Kingdom)

2013-07-01T23:59:59.000Z

336

Positron plasma control techniques for the production of cold antihydrogen  

SciTech Connect (OSTI)

An observation of a clear dependence of antihydrogen production on positron plasma shapes is reported. For this purpose a plasma control method has been developed combining the plasma rotating-wall technique with a mode diagnostic system. With the help of real-time and nondestructive observations, the rotating-wall parameters have been optimized. The positron plasma can be manipulated into a wide range of shapes (aspect ratio 6.5{<=}{alpha} < or approx. 80) and densities (1.5x10{sup 8}{<=}n < or approx. 7x10{sup 9} cm{sup -3}) within a short duration (25 s) compatible with the ATHENA antihydrogen production cycle.

Funakoshi, R.; Hayano, R. S. [Department of Physics, University of Tokyo, Tokyo 113-0033 (Japan); Amoretti, M.; Macri, M.; Testera, G.; Variola, A. [Istituto Nazionale di Fisica Nucleare, Sezione di Genova, 16146 Genova (Italy); Bonomi, G. [Dipartimento di Ingegneria Meccanica, Universita di Brescia, 25123 Brescia (Italy); Dipartimento di Fisica Nucleare e Teorica, Universita di Pavia, 27100 Pavia (Italy); Bowe, P. D.; Hangst, J. S.; Madsen, N. [Department of Physics and Astronomy, University of Aarhus, 8000 Aarhus C (Denmark); Canali, C.; Carraro, C.; Lagomarsino, V.; Manuzio, G. [Istituto Nazionale di Fisica Nucleare, Sezione di Genova, 16146 Genova (Italy); Dipartimento di Fisica, Universita di Genova, 16146 Genova (Italy); Cesar, C. L. [Instituto de Fisica, Universidade do Brasil, Cx Postal 68528, Rio de Janeiro 21941-972 (Brazil); Charlton, M.; Joergensen, L. V.; Mitchard, D.; Werf, D. P. van der [Department of Physics, University of Wales Swansea, Swansea SA2 8PP (United Kingdom); Doser, M. [PH Department, CERN, 1211 Geneva 23 (Switzerland)] (and others)

2007-07-15T23:59:59.000Z

337

Conceptual Ideas for New Nondestructive UF6 Cylinder Assay Techniques  

SciTech Connect (OSTI)

Nondestructive assay (NDA) measurements of uranium cylinders play an important role in helping the International Atomic Energy Agency (IAEA) safeguard uranium enrichment plants. Traditionally, these measurements have consisted of a scale or load cell to determine the mass of UF{sub 6} in the cylinder combined with a gamma-ray measurement of the 186 keV peak from {sup 235}U to determine enrichment. More recently, Los Alamos National Laboratory (LANL) and Pacific Northwest National Laboratory (PNNL) have developed systems that exploit the passive neutron signal from UF{sub 6} to determine uranium mass and/or enrichment. These include the Uranium Cylinder Assay System (UCAS), the Passive Neutron Enrichment Meter (PNEM), and the Hybrid Enrichment Verification Array (HEVA). The purpose of this report is to provide the IAEA with new ideas on technologies that may or may not be under active development but could be useful for UF{sub 6} cylinder assay. To begin, we have included two feasibility studies of active interrogation techniques. There is a long history of active interrogation in the field of nuclear safeguards, especially for uranium assay. Both of the active techniques provide a direct measure of {sup 235}U content. The first is an active neutron method based on the existing PNEM design that uses a correlated {sup 252}Cf interrogation source. This technique shows great promise for UF{sub 6} cylinder assay and is based on advanced technology that could be implemented in the field in the near term. The second active technique is nuclear resonance fluorescence (NRF). In the NRF technique, a bremsstrahlung photon beam could be used to illuminate the cylinder, and high-resolution gamma-ray detectors would detect the characteristic de-excitation photons. The results of the feasibility study show that under certain measurement geometries, NRF is impractical for UF6 cylinder assay, but the 'grazing transmission' and 'secant transmission' geometries have more potential for this application and should be assessed quantitatively. The next set of techniques leverage scintillator detectors that are sensitive to both neutron and gamma radiation. The first is the BC-523A capture-gated organic liquid scintillator. The detector response from several different neutron energies has been characterized and is included in the study. The BC-523A has not yet been tested with UF{sub 6} cylinders, but the application appears to be well suited for this technology. The second detector type is a relatively new inorganic scintillator called CLYC. CLYC provides a complementary detection approach to the HEVA and PNEM systems that could be used to determine uranium enrichment in UF{sub 6} cylinders. In this section, the conceptual idea for an integrated CLYC-HEVA/PNEM system is explored that could yield more precision and robustness against systemic uncertainties than any one of the systems by itself. This is followed by a feasibility study on using alpha-particle-induced reaction gamma-rays as a way to estimate {sup 234}U abundance in UF{sub 6}. Until now, there has been no readily available estimate of the strength of these reaction gamma-rays. Thick target yields of the chief reaction gammas are computed and show that they are too weak for practical safeguards applications. In special circumstances where long count times are permissible, the 1,275 keV F({alpha},x{gamma}) is observable. Its strength could help verify an operator declaration provided other knowledge is available (especially the age). The other F({alpha},x{gamma}) lines are concealed by the dominant uranium line spectrum and associated continuum. Finally, the last section provides several ideas for electromagnetic and acoustic nondestructive evaluation (NDE) techniques. These can be used to measure cylinder wall thickness, which is a source of systematic uncertainty for gamma-ray-based NDA techniques; characterize the UF{sub 6} filling profile inside the cylinder, which is a source of systematic uncertainty for neutron-based NDA techniques; locate hidden objects inside the cylinder; a

Miller, Karen A. [Los Alamos National Laboratory

2012-05-02T23:59:59.000Z

338

Some iterative techniques for solving simultaneous linear equations  

E-Print Network [OSTI]

E16 ~ 7) END JACOSI e GAUSS-SEI DEL e AND KACZMARZ TECHNIQUES FOR SOLVING SIMULTANEOUS LINEAR EQUAT IQNS EPSILON = 0 99999999E-05 AND ITMAX 25 THE ORIGINAL MATRIX OF COEFFICIENTS 0 ~ 09999999E 01 0 ~ 20000000E 01 0 ~ 30000000E 01 0 ~ 40000000E... 01 Oe500OQQOOE 01 Oe20000000E 01 0 ~ 30000000E 01 0 ~ 40000000E 01 0 ~ 50000000E 01 Oe09999999E 01 Oe40000000E 01 0e09999999E 01 Oe 3000000OE 01 0 ~ 50000000E Ol 0 ~ 20000000E 01 Oq 20000000E 01 0 ~ 50000000E 01 0 ~ 09999999E 01 0 ~ 400QOQOOE 01 0...

Nolen, James Henry

2012-06-07T23:59:59.000Z

339

Graphene-based terahertz photodetector by noise thermometry technique  

SciTech Connect (OSTI)

We report the characteristics of graphene-based terahertz (THz) photodetector based on noise thermometry technique by measuring its noise power at frequency from 4 to 6 GHz. Hot electron system in graphene microbridge is generated after THz photon pumping and creates extra noise power. The equivalent noise temperature and electron temperature increase rapidly in low THz pumping regime and saturate gradually in high THz power regime which is attributed to a faster energy relaxation process involved by stronger electron-phonon interaction. Based on this detector, a conversion efficiency around 0.15 from THz power to noise power in 46?GHz span has been achieved.

Wang, Ming-Jye, E-mail: mingjye@asiss.sinica.edu.tw [Institute of Astronomy and Astrophysics, Academia Sinica, Taipei 10617, Taiwan (China); Institute of Physics, Academia Sinica, Taipei 11529, Taiwan (China); Wang, Ji-Wun [Institute of Astronomy and Astrophysics, Academia Sinica, Taipei 10617, Taiwan (China); Department of Physics, National Tsing-Hua University, Hsinchu 30013, Taiwan (China); Wang, Chun-Lun; Chiang, Yen-Yu; Chang, Hsian-Hong [Institute of Astronomy and Astrophysics, Academia Sinica, Taipei 10617, Taiwan (China)

2014-01-20T23:59:59.000Z

340

New modes of particle accelerations techniques and sources. Formal report  

SciTech Connect (OSTI)

This Report includes copies of transparencies and notes from the presentations made at the Symposium on New Modes of Particle Accelerations - Techniques and Sources, August 19-23, 1996 at the Institute for Theoretical Physics, University of California, Santa Barbara California, that was made available by the authors. Editing, reduction and changes to the authors contributions were made only to fulfill the printing and publication requirements. We would like to take this opportunity and thank the speakers for their informative presentations and for providing copies of their transparencies and notes for inclusion in this Report.

Parsa, Z. [ed.

1996-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Utilization of Time-Based Techniques in Research and Teaching  

E-Print Network [OSTI]

, and then as a teaching tool in 3 elective courses. I conducted a study of two private houses designed by two leading Latin American architects: Oscar Niemeyer, known for the curvilinear white forms in the city of Brasilia, and Lina BoBardi, best known for her... of the fade or if one scene dissolves into another or fades to black (or white). I first used this technique in my own animations of Casa Canoas by Oscar Niemeyer, and Casa de Vidro, by Lina BoBardi. I used the fade to show the connection between the digital...

Sanguinetti, Paola

2009-07-29T23:59:59.000Z

342

Applicability of Operational Research Techniques in CANDU Nuclear Plant Maintenance  

SciTech Connect (OSTI)

As previously reported at ICONE 6 in New Orleans, 1996, and ICONE 9 in Niece, 2001, the use of various maintenance optimization techniques at Bruce has lead to cost effective preventive maintenance applications for complex systems. Innovative practices included greatly reducing Reliability Centered Maintenance (RCM) costs while maintaining the accuracy of the analysis. The optimization strategy has undergone further evolution and at the present an Integrated Maintenance Program (IMP) is being put in place. Further cost refinement of the station preventive maintenance strategy whereby decisions are based on statistical analysis of historical failure data is being evaluated. A wide range of Operational Research (OR) literature was reviewed for implementation issues and several encouraging areas were found that will assist in the current effort of evaluating maintenance optimization techniques for nuclear power production. The road ahead is expected to consist first of resolving 25 years of data issues and preserving the data via appropriate knowledge system techniques while post war demographics permit experts to input into the system. Subsequent analytical techniques will emphasize total simplicity to obtain the requisite buy in from Corporate Executives who possibly are not trained in Operational Research. Case studies of containment airlock seal failures are used to illustrate the direct applicability of stochastic processes. Airlocks and transfer chambers were chosen as they have long been known as high maintenance items. Also, the very significant financial consequences of this type of failure will help to focus the attention of Senior Management on the effort. Despite substantial investment in research, improvement in the design of the seal material or configuration has not been achieved beyond the designs completed in the 1980's. Overall, the study showed excellent agreement of the relatively quick stochastic methods with the maintenance programs produced at great cost over years of trial and error. The pivotal role of expert opinion via experienced users/problem owners/maintenance engineers in all phases of the method and its application was noted and will be explored in subsequent efforts. The results are displayed via economic alternatives to more easily attract the attention of Maintenance Managers. Graphical overviews of the data demonstrated that substantial insight can be gained by simply organizing the data into statistically meaningful arrays such as histograms. The conclusions highlight several very positive avenues to evaluate at this particular juncture in time. (author)

Doyle, E. Kevin [Bruce Power LP, Box 4000B12, Tiverton, Ont., N0G2T0 (Canada)

2002-07-01T23:59:59.000Z

343

Radiation Pattern Reconstruction Techniques for Antenna Measurement using Chebyshev Polynomials  

E-Print Network [OSTI]

A new method of antenna radiation pattern reconstruction using Chebyshev polynomials was presented in this paper. The analysis starts from the data measured in the frequency domain, and it corresponds to a direct propagating between two antennas and reflected propagating waves from the copper plate. The accuracy of this technique is evaluated at the frequency of 3.35GHz by the anechoic conditions. As a result, the Chebyshev method shows us a good performance in the E-plane in the range of -70{\\deg} ~0{\\deg}.

Zhou Du; Minwook Kwon; Dongsun Choi; Jinhwan Koh

2014-09-02T23:59:59.000Z

344

Engine control techniques to account for fuel effects  

DOE Patents [OSTI]

A technique for engine control to account for fuel effects including providing an internal combustion engine and a controller to regulate operation thereof, the engine being operable to combust a fuel to produce an exhaust gas; establishing a plurality of fuel property inputs; establishing a plurality of engine performance inputs; generating engine control information as a function of the fuel property inputs and the engine performance inputs; and accessing the engine control information with the controller to regulate at least one engine operating parameter.

Kumar, Shankar; Frazier, Timothy R.; Stanton, Donald W.; Xu, Yi; Bunting, Bruce G.; Wolf, Leslie R.

2014-08-26T23:59:59.000Z

345

High- and low-temperature bonding techniques for microstructures  

SciTech Connect (OSTI)

The ability to bond together two or more silicon wafers greatly expands the variety and complexity of silicon microstructures that can be designed and fabricated. At LLNL, microstructures have been used for many years as hardware in scientific experiments. The activity has recently been expanded into other areas to include microinstruments for biomedical applications and for chemical analysis. Both high temperature (1100{degrees}C) bonding techniques have been used, depending on the application. This paper discusses these applications with emphasis on the most extensive which is the fabrication of microchannel coolers for diode arrays.

Ciarlo, D.R.

1993-06-22T23:59:59.000Z

346

Progress achieved in HLW vitrification techniques at INE  

SciTech Connect (OSTI)

The progress in the liquid-fed ceramic waste glass melter process for high level waste vitrification is described. The technique has been used in the PAMELA plant in Mol/Belgium from 1985 to 1991. Currently three programs are underway at INE (Institut fuer Nukleare Entsorgungstechnik): a technology program for optimizing the process for noble metals containing high level waste (HLW), a vitrification technology transfer project with China, and a research project on noble metals behavior in an engineering scale melter which is funded by the US Department of Energy with oversight by the Pacific Northwest Laboratory (PNL) in Richland, WA. The status of the programs and results available are described.

Grunewald, W.; Roth, G.; Tobie, W.; Weisenburger, S. [Kernforschungszentrum Karlsruhe GmbH (Germany). Inst. fuer Nucleare Entsorgungstechnik

1993-12-31T23:59:59.000Z

347

Nano powders, components and coatings by plasma technique  

DOE Patents [OSTI]

Ultra fine and nanometer powders and a method of producing same are provided, preferably refractory metal and ceramic nanopowders. When certain precursors are injected into the plasma flame in a reactor chamber, the materials are heated, melted and vaporized and the chemical reaction is induced in the vapor phase. The vapor phase is quenched rapidly to solid phase to yield the ultra pure, ultra fine and nano product. With this technique, powders have been made 20 nanometers in size in a system capable of a bulk production rate of more than 10 lbs/hr. The process is particularly applicable to tungsten, molybdenum, rhenium, tungsten carbide, molybdenum carbide and other related materials.

McKechnie, Timothy N. (Brownsboro, AL); Antony, Leo V. M. (Huntsville, AL); O'Dell, Scott (Arab, AL); Power, Chris (Guntersville, AL); Tabor, Terry (Huntsville, AL)

2009-11-10T23:59:59.000Z

348

Investigation of grid embedment techniques as applied to subcritical flow  

E-Print Network [OSTI]

INVESTIGATION OF GRID EMBEDMENT TECHNIOUES AS APPI IED TO SUBCRITICAL FLOW A Thesis by MICHAEL E. WATTS Submitted to the Graduate College of Texas A@1 University in partial fulfi11ment of the requirements for the degree of MASTER OF SCIENCE... December, 1980 Major Subject: Aerospace Engineering INVESTIGATION OF GRID EMBEDMENT TECHNIQUES AS APPLIED TO SUBCRITICAL FLOW A Thesis by MICHAEL E, WATTS Approved as to style and content by: a)rm n o Committee 3 J4W Member p' c. ember Member...

Watts, Michael E.

1980-01-01T23:59:59.000Z

349

New ALS Technique Gives Nanoscale Views of Complex Systems  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the Contributions andDataNational Library of1, 2007TransmissiontoSystemNew ALS Technique

350

Technique Recovers Atomic Resolution in Spectrum Images | ornl.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security AdministrationcontrollerNanocrystallineForeign ObjectOUR8,Materials Characterization Technique Recovers

351

Category:Electromagnetic Profiling Techniques | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: EnergyBostonFacilityCascade SierraStatus Statuspage? ForEZFeedTechniques

352

THERMOANALYTICAL TECHNIQUES P. J. Nigrey O S T I  

Office of Scientific and Technical Information (OSTI)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation InInformation In closing, an overarchingInformationTHERMOANALYTICAL TECHNIQUES \ P. J.

353

Alternative Fuels Data Center: Techniques for Drivers to Conserve Fuel  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone by E-mail Share Alternative FuelsFuelingStaplesTechniques for

354

New approaches to estimation of magnetotelluric parameters  

SciTech Connect (OSTI)

Fully efficient robust data processing procedures were developed and tested for single station and remote reference magnetotelluric (Mr) data. Substantial progress was made on development, testing and comparison of optimal procedures for single station data. A principal finding of this phase of the research was that the simplest robust procedures can be more heavily biased by noise in the (input) magnetic fields, than standard least squares estimates. To deal with this difficulty we developed a robust processing scheme which combined the regression M-estimate with coherence presorting. This hybrid approach greatly improves impedance estimates, particularly in the low signal-to-noise conditions often encountered in the dead band'' (0.1--0.0 hz). The methods, and the results of comparisons of various single station estimators are described in detail. Progress was made on developing methods for estimating static distortion parameters, and for testing hypotheses about the underlying dimensionality of the geological section.

Egbert, G.D.

1991-01-01T23:59:59.000Z

355

Nondestructive NMR technique for moisture determination in radioactive materials.  

SciTech Connect (OSTI)

This progress report focuses on experimental and computational studies used to evaluate nuclear magnetic resonance (NMR) spectroscopy and magnetic resonance imaging (MRI) for detecting, quantifying, and monitoring hydrogen and other magnetically active nuclei ({sup 3}H, {sup 3}He, {sup 239}Pu, {sup 241}Pu) in Spent nuclear fuels and packaging materials. The detection of moisture by using a toroid cavity NMR imager has been demonstrated in SiO{sub 2} and UO{sub 2} systems. The total moisture was quantified by means of {sup 1}H NMR detection of H{sub 2}O with a sensitivity of 100 ppm. In addition, an MRI technique that was used to determine the moisture distribution also enabled investigators to discriminate between bulk and stationary water sorbed on the particles. This imaging feature is unavailable in any other nondestructive assay (NDA) technique. Following the initial success of this program, the NMR detector volume was scaled up from the original design by a factor of 2000. The capacity of this detector exceeds the size specified by DOE-STD-3013-96.

Aumeier, S.; Gerald, R.E. II; Growney, E.; Nunez, L.; Kaminski, M.

1998-12-04T23:59:59.000Z

356

INTERIM REPORT ON CONCRETE DEGRADATION MECHANISMS AND ONLINE MONITORING TECHNIQUES  

SciTech Connect (OSTI)

The existing fleets of nuclear power plants in the United States have initial operating licenses of 40 years, though most these plants have applied for and received license extensions. As plant structures, systems, and components age, their useful lifeconsidering both structural integrity and performanceis reduced as a result of deterioration of the materials. The online monitoring of concrete structure conducted under the Advanced Instrumentation, Information, and Control Technologies Pathway of the Light Water Reactor Sustainability program at Idaho National Laboratory will develop and demonstrate concrete structures health monitoring capabilities. Assessment and management of aging concrete structures in nuclear plants require a more systematic approach than simple reliance on existing code margins of safety. Therefore, the structural health monitoring is required to produce actionable information regarding structural integrity that supports operational and maintenance decisions. Through this research project, several national laboratories and Vanderbilt University proposes to develop a framework of research activities for the health monitoring of nuclear power plant concrete structures that includes integration of four elementsdamage modeling, monitoring, data analytics, and uncertainty quantification. This report briefly discusses available techniques and ongoing challenges in each of the four elements of the proposed framework with emphasis on degradation mechanisms and online monitoring techniques.

Mahadevan, Sankaran; Agarwal, Vivek; Neal, Kyle; Kosson, David; Adams, Douglas

2014-09-01T23:59:59.000Z

357

Comparison of two techniques for the simulation of PV systems  

SciTech Connect (OSTI)

For several years, MIT Lincoln Laboratory has conducted computer simulations of the performance of photovoltaic solar energy systems in order to size system components, to define designs of potential economic feasibility, to test various control schemes, and to monitor the performance of working systems in the field. When used as an aid-to-design, these hourly simulations step through a full year's worth of insolation and weather data at a specific geographical site. These data are available on computer tapes in the SOLMET format from the National Climatic Center. More recently, a simulation technique has been developed that does not require marching through time but instead works with probability-density functions of daily values of insolation and load as inputs while still providing estimates of the usual measures of system performance (e.g., auxiliary energy required, surplus energy thrown away, fraction of load displaced). Results obtained compare well with results previously obtained from an hourly simulation of a daytime radio station. This technique may be used to study the effect on system performance of varying degrees of correlation of load with insolation and to test the sensitivity of economic analyses to variations in utility escalation rate (discounted for inflation), PV module and balance-of-system costs.

Bucciarelli, L.L.; Grossman, B.L.

1980-01-01T23:59:59.000Z

358

A Comparison of Techniques for Detecting Abnormal Change in Blogs  

SciTech Connect (OSTI)

Distributed collections are made of metadata entries that contain references to artifacts not controlled by the collection curators. These collections often have limited forms of change; for digital distributed collections, primarily creation and deletion of additional resources. However, there exists a class of digital collection that undergoes additional kinds of change. These collections consist of resources that are distributed across the Internet and brought together via hyperlinking. Resources in these collections can be expected to change as time goes on. Part of the difficulty in maintaining these collections is determining if a changed page is still a valid member of the collection. Others have tried to address this by defining a maximum allowed threshold of change, however, these methods treat change as a potential problem and treat web content as static despite its intrinsic dynamicism. Instead we acknowledge change on the web as a normal part of a web document and determine the difference between what a maintainer expects a page to do and what it actually does. In this work we evaluate options for extractors and analyzers from a suite of techniques against a human-generated ground-truth set of blog changes. The results of this work show a statistically significant improvement over traditional threshold techniques for our collection.

Furuta, Dr. Richard Keith [Texas A& M University] [Texas A& M University; ShipmanIII, Dr. Frank Major [Texas A& M University] [Texas A& M University; Bogen, Paul Logasa [ORNL] [ORNL

2012-01-01T23:59:59.000Z

359

Architectural Techniques For Managing Non-volatile Caches  

SciTech Connect (OSTI)

As chip power dissipation becomes a critical challenge in scaling processor performance, computer architects are forced to fundamentally rethink the design of modern processors and hence, the chip-design industry is now at a major inflection point in its hardware roadmap. The high leakage power and low density of SRAM poses serious obstacles in its use for designing large on-chip caches and for this reason, researchers are exploring non-volatile memory (NVM) devices, such as spin torque transfer RAM, phase change RAM and resistive RAM. However, since NVMs are not strictly superior to SRAM, effective architectural techniques are required for making them a universal memory solution. This book discusses techniques for designing processor caches using NVM devices. It presents algorithms and architectures for improving their energy efficiency, performance and lifetime. It also provides both qualitative and quantitative evaluation to help the reader gain insights and motivate them to explore further. This book will be highly useful for beginners as well as veterans in computer architecture, chip designers, product managers and technical marketing professionals.

Mittal, Sparsh [ORNL] ORNL

2013-01-01T23:59:59.000Z

360

Research in nondestructive evaluation techniques for nuclear reactor concrete structures  

SciTech Connect (OSTI)

The purpose of the Materials Aging and Degradation (MAaD) Pathway of the Department of Energy's Light Water Reactor Sustainability (LWRS) Program is to develop the scientific basis for understanding and predicting longterm environmental degradation behavior of material in nuclear power plants and to provide data and methods to assess the performance of systems, structures, and components (SSCs) essential to safe and sustained nuclear power plant operations. The understanding of aging-related phenomena and their impacts on SSCs is expected to be a significant issue for any nuclear power plant planning for long-term operations (i.e. service beyond the initial license renewal period). Management of those phenomena and their impacts during long-term operations can be better enable by improved methods and techniques for detection, monitoring, and prediction of SSC degradation. The MAaD Pathway R and D Roadmap for Concrete, 'Light Water Reactor Sustainability Nondestructive Evaluation for Concrete Research and Development Roadmap', focused initial research efforts on understanding the recent concrete issues at nuclear power plants and identifying the availability of concrete samples for NDE techniques evaluation and testing. [1] An overview of the research performed by ORNL in these two areas is presented here.

Clayton, Dwight; Smith, Cyrus [Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831 (United States)

2014-02-18T23:59:59.000Z

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Function Analysis and Decomposistion using Function Analysis Systems Technique  

SciTech Connect (OSTI)

The "Father of Value Analysis", Lawrence D. Miles, was a design engineer for General Electric in Schenectady, New York. Miles developed the concept of function analysis to address difficulties in satisfying the requirements to fill shortages of high demand manufactured parts and electrical components during World War II. His concept of function analysis was further developed in the 1960s by Charles W. Bytheway, a design engineer at Sperry Univac in Salt Lake City, Utah. Charles Bytheway extended Mile's function analysis concepts and introduced the methodology called Function Analysis Systems Technique (FAST) to the Society of American Value Engineers (SAVE) at their International Convention in 1965 (Bytheway 1965). FAST uses intuitive logic to decompose a high level, or objective function into secondary and lower level functions that are displayed in a logic diagram called a FAST model. Other techniques can then be applied to allocate functions to components, individuals, processes, or other entities that accomplish the functions. FAST is best applied in a team setting and proves to be an effective methodology for functional decomposition, allocation, and alternative development.

Wixson, James Robert

1999-06-01T23:59:59.000Z

362

Function Analysis and Decomposistion using Function Analysis Systems Technique  

SciTech Connect (OSTI)

The "Father of Value Analysis", Lawrence D. Miles, was a design engineer for General Electric in Schenectady, New York. Miles developed the concept of function analysis to address difficulties in satisfying the requirements to fill shortages of high demand manufactured parts and electrical components during World War II. His concept of function analysis was further developed in the 1960s by Charles W. Bytheway, a design engineer at Sperry Univac in Salt Lake City, Utah. Charles Bytheway extended Mile's function analysis concepts and introduced the methodology called Function Analysis Systems Techniques (FAST) to the Society of American Value Engineers (SAVE) at their International Convention in 1965 (Bytheway 1965). FAST uses intuitive logic to decompose a high level, or objective function into secondary and lower level functions that are displayed in a logic diagram called a FAST model. Other techniques can then be applied to allocate functions to components, individuals, processes, or other entities that accomplish the functions. FAST is best applied in a team setting and proves to be an effective methodology for functional decomposition, allocation, and alternative development.

J. R. Wixson

1999-06-01T23:59:59.000Z

363

VELOCITY ANISOTROPY AND SHAPE BIAS IN THE CAUSTIC TECHNIQUE  

SciTech Connect (OSTI)

We use the Millennium Simulation to quantify the statistical accuracy and precision of the escape-velocity technique for measuring cluster-sized halo masses at z {approx} 0.1. We show that in three dimensions one can measure nearly unbiased (<4%) halo masses (>1.5 Multiplication-Sign 10{sup 14} M{sub Sun} h {sup -1}) with 10%-15% scatter. Line-of-sight projection effects increase the scatter to {approx}25%, where we include the known velocity anisotropies. The classical ''caustic'' technique incorporates a calibration factor that is determined from N-body simulations. We derive and test a new implementation that eliminates the need for calibration and utilizes only the observables: the galaxy velocities with respect to the cluster mean v, the projected positions r{sub p} , an estimate of the Navarro-Frenk-White (NFW) density concentration, and an estimate of the velocity anisotropies {beta}. We find that differences between the potential and density NFW concentrations induce a 10% bias in the caustic masses. We also find that large (100%) systematic errors in the observed ensemble average velocity anisotropies and concentrations translate to small (5%-10%) biases in the inferred masses.

Gifford, Daniel; Miller, Christopher J. [Department of Astronomy, University of Michigan, 500 Church St., Ann Arbor, MI 48109 (United States)

2013-05-10T23:59:59.000Z

364

Improved analysis techniques for cylindrical and spherical double probes  

SciTech Connect (OSTI)

A versatile double Langmuir probe technique has been developed by incorporating analytical fits to Laframboise's numerical results for ion current collection by biased electrodes of various sizes relative to the local electron Debye length. Application of these fits to the double probe circuit has produced a set of coupled equations that express the potential of each electrode relative to the plasma potential as well as the resulting probe current as a function of applied probe voltage. These equations can be readily solved via standard numerical techniques in order to determine electron temperature and plasma density from probe current and voltage measurements. Because this method self-consistently accounts for the effects of sheath expansion, it can be readily applied to plasmas with a wide range of densities and low ion temperature (T{sub i}/T{sub e} Much-Less-Than 1) without requiring probe dimensions to be asymptotically large or small with respect to the electron Debye length. The presented approach has been successfully applied to experimental measurements obtained in the plume of a low-power Hall thruster, which produced a quasineutral, flowing xenon plasma during operation at 200 W on xenon. The measured plasma densities and electron temperatures were in the range of 1 Multiplication-Sign 10{sup 12}-1 Multiplication-Sign 10{sup 17} m{sup -3} and 0.5-5.0 eV, respectively. The estimated measurement uncertainty is +6%/-34% in density and +/-30% in electron temperature.

Beal, Brian; Brown, Daniel; Bromaghim, Daron [Air Force Research Laboratory, 1 Ara Rd., Edwards Air Force Base, California 93524 (United States); Johnson, Lee [Jet Propulsion Laboratory, California Institute of Technology, 4800 Oak Grove Dr., Pasadena, California 91109 (United States); Blakely, Joseph [ERC Inc., 1 Ara Rd., Edwards Air Force Base, California 93524 (United States)

2012-07-15T23:59:59.000Z

365

Risk Management Techniques and Practice Workshop Workshop Report  

SciTech Connect (OSTI)

At the request of the Department of Energy (DOE) Office of Science (SC), Lawrence Livermore National Laboratory (LLNL) hosted a two-day Risk Management Techniques and Practice (RMTAP) workshop held September 18-19 at the Hotel Nikko in San Francisco. The purpose of the workshop, which was sponsored by the SC/Advanced Scientific Computing Research (ASCR) program and the National Nuclear Security Administration (NNSA)/Advanced Simulation and Computing (ASC) program, was to assess current and emerging techniques, practices, and lessons learned for effectively identifying, understanding, managing, and mitigating the risks associated with acquiring leading-edge computing systems at high-performance computing centers (HPCCs). Representatives from fifteen high-performance computing (HPC) organizations, four HPC vendor partners, and three government agencies attended the workshop. The overall workshop findings were: (1) Standard risk management techniques and tools are in the aggregate applicable to projects at HPCCs and are commonly employed by the HPC community; (2) HPC projects have characteristics that necessitate a tailoring of the standard risk management practices; (3) All HPCC acquisition projects can benefit by employing risk management, but the specific choice of risk management processes and tools is less important to the success of the project; (4) The special relationship between the HPCCs and HPC vendors must be reflected in the risk management strategy; (5) Best practices findings include developing a prioritized risk register with special attention to the top risks, establishing a practice of regular meetings and status updates with the platform partner, supporting regular and open reviews that engage the interests and expertise of a wide range of staff and stakeholders, and documenting and sharing the acquisition/build/deployment experience; and (6) Top risk categories include system scaling issues, request for proposal/contract and acceptance testing, and vendor technical or business problems. HPC, by its very nature, is an exercise in multi-level risk management. Every aspect of stewarding HPCCs into the petascale era, from identification of the program drivers to the details of procurement actions and simulation environment component deployments, represents unprecedented challenges and requires effective risk management. The fundamental purpose of this workshop was to go beyond risk management processes as such and learn how to weave effective risk management practices, techniques, and methods into all aspects of migrating HPCCs into the next generation of leadership computing systems. This workshop was a follow-on to the Petascale System Integration Workshop hosted by Lawrence Berkeley National Laboratory (LBNL)/NERSC last year. It was intended to leverage and extend the risk management experience of the participants by looking for common best practices and unique processes that have been especially successful. This workshop assessed the effectiveness of tools and techniques that are or could be helpful in HPCC risk management, with a special emphasis on how practice meets process. As the saying goes: 'In theory, there is no difference between theory and practice. In practice there is'. Finally, the workshop brought together a network of experts who shared information as technology moves into the petascale era and beyond.

Quinn, T; Zosel, M

2008-12-02T23:59:59.000Z

366

High Rate Laser Pitting Technique for Solar Cell Texturing  

SciTech Connect (OSTI)

High rate laser pitting technique for solar cell texturing Efficiency of crystalline silicon solar cells can be improved by creating a texture on the surface to increase optical absorption. Different techniques have been developed for texturing, with the current state-of-the-art (SOA) being wet chemical etching. The process has poor optical performance, produces surfaces that are difficult to passivate or contact and is relatively expensive due to the use of hazardous chemicals. This project shall develop an alternative process for texturing mc-Si using laser micromachining. It will have the following features compared to the current SOA texturing process: -Superior optical surfaces for reduced front-surface reflection and enhanced optical absorption in thin mc-Si substrates -Improved surface passivation -More easily integrated into advanced back-contact cell concepts -Reduced use of hazardous chemicals and waste treatment -Similar or lower cost The process is based on laser pitting. The objective is to develop and demonstrate a high rate laser pitting process which will exceed the rate of former laser texturing processes by a factor of ten. The laser and scanning technologies will be demonstrated on a laboratory scale, but will use inherently technologies that can easily be scaled to production rates. The drastic increase in process velocity is required for the process to be implemented as an in-line process in PV manufacturing. The project includes laser process development, development of advanced optical systems for beam manipulation and cell reflectivity and efficiency testing. An improvement of over 0.5% absolute in efficiency is anticipated after laser-based texturing. The surface textures will be characterized optically, and solar cells will be fabricated with the new laser texturing to ensure that the new process is compatible with high-efficiency cell processing. The result will be demonstration of a prototype process that is suitable for scale-up to a production tool and process. The developed technique will have an reducing impact on product pricing. As efficiency has a substantial impact on the economics of solar cell production due to the high material cost content; in essence, improved efficiency through cost-effective texturing reduces the material cost component since the product is priced in terms of $/W. The project is a collaboration between Fraunhofer USA, Inc. and a c-Si PV manufacturer.

Hans J. Herfurth; Henrikki Pantsar

2013-01-10T23:59:59.000Z

367

GEOFRAC: an explosives stimulation technique for a geothermal well  

SciTech Connect (OSTI)

The first known use of explosives for stimulating a geothermal well was successfully conducted in December 1981 with a process called GEOFRAC. The 260/sup 0/C well was located at the Union Oil Company's Geysers Field in northern California. For the initial test, 364 kg of a new explosive called HITEX II was placed at a depth of 2256 meters and detonated to verify techniques. The explosive was contained in an aluminum canister to separate it from the well fluids. In the second test, 5000 kg of explosive was used representing a column length of approximately 191 meters. The explosive was detonated at a depth of 1697 meters in the same well. The results of these tests show that HITEX II can be safely emplaced and successfully detonated in a hot geothermal well without causing damage to the well bore or casing.

Mumma, D.M.; McCullough, F. Jr.; Schmidt, E.W.; Pye, D.S.; Allen, W.C.; Pyle, D.; Hanold, R.J.

1982-01-01T23:59:59.000Z

368

Intermediate hearth repair technique at Thyssen Stahl AG  

SciTech Connect (OSTI)

Nowadays various techniques for the fastest possible intermediate repair and/or emplacement of refractory materials above the tuyere level allow a significant extension of furnace campaign life. The latter are hence now exclusively determined by the service life of the hearth. The improvement of hearth monitoring and the estimation of residual brick strength of the refractory lining on the basis of temperature measurements in the hearth enable the location of individual zones of premature wear. These measurement methods, which were developed by Thyssen Stahl AG, aid the decision to undertake selective repair of the hearth. Three areas of repair are differentiated: taphole zone; hearth wall, localized; and hearth wall, extensive. This hearth repair method is described in this report using the example of hearth refurbishing blast furnace 8, Hamborn.

Kowalski, W.; Bachhofen, H.J.; Ruether, P.; Ballewski, T. [Thyssen Stahl AG, Duisburg (Germany)

1996-12-31T23:59:59.000Z

369

Passive remote smoke plume opacity sensing: a technique  

SciTech Connect (OSTI)

A new passive technique for the remote measurement of the visual opacity of plumes emerging from smokestacks is presented. It is based on the detection of the attenuation of the polarized component of Rayleigh-scattered background skylight as it traverses a smoke plume. A two-color difference measurement of the polarization of skylight through the plume is compared with a similar measurement of the unattenuated sky-light adjacent to the plume. This method is independent of the intrinsic brightness of the plume resulting from the scattering of sunlight and cancels white-light polarization effects of plume-scattered radiation. A prototype instrument incorporating this method has been successfully field tested on an EPA smoke school generator and a power plant stack plume.

Lilenfeld, P.; Woker, G.; Stern, R.; McVay, L.

1981-03-01T23:59:59.000Z

370

Similarity Matching Techniques for Fault Diagnosis in Automotive Infotainment Electronics  

E-Print Network [OSTI]

Fault diagnosis has become a very important area of research during the last decade due to the advancement of mechanical and electrical systems in industries. The automobile is a crucial field where fault diagnosis is given a special attention. Due to the increasing complexity and newly added features in vehicles, a comprehensive study has to be performed in order to achieve an appropriate diagnosis model. A diagnosis system is capable of identifying the faults of a system by investigating the observable effects (or symptoms). The system categorizes the fault into a diagnosis class and identifies a probable cause based on the supplied fault symptoms. Fault categorization and identification are done using similarity matching techniques. The development of diagnosis classes is done by making use of previous experience, knowledge or information within an application area. The necessary information used may come from several sources of knowledge, such as from system analysis. In this paper similarity matching tec...

Kabir, Mashud

2009-01-01T23:59:59.000Z

371

TECHNIQUES FOR THE STUDY OF THE STRUCTURAL PROPERTIES.  

SciTech Connect (OSTI)

The evolution of our understanding of the behavior of oxide nanostructures depends heavily on the structural information obtained from a wide range of physical methods traditionally used in solid state physics, surface science and inorganic chemistry. In this chapter, we describe several techniques that are useful for the characterization of the structural properties of oxide nanostructures: X-ray diffraction (XRD) and scattering, X-ray absorption fine structure (XAFS), Raman spectroscopy, transmission electron microscopy (TEM), scanning tunneling microscopy (STM) and atomic force microscopy (AFM). The ultimate goal is to obtain information about the spatial arrangement of atoms in the nanostructures with precise interatomic distances and bond angles. This may not be possible for complex systems and one may get only partial information about the local geometry or morphology.

FERNANDEZ-GARCIA, M.; RODRIGUEZ, J.A.; MARTINEZ-ARIAS, A.; HANSON, J.C.

2006-06-30T23:59:59.000Z

372

Hermetic fiber optic-to-metal connection technique  

DOE Patents [OSTI]

A glass-to-glass hermetic sealing technique is disclosed which can be used to splice lengths of glass fibers together. A solid glass preform is inserted into the cavity of a metal component which is then heated to melt the glass. An end of an optical fiber is then advanced into the molten glass and the entire structure cooled to solidify the glass in sealing engagement with the optical fiber end and the metal cavity. The surface of the re-solidified glass may be machined for mating engagement with another component to make a spliced fiber optic connection. The resultant structure has a helium leak rate of less than 1.times.10.sup.-8 cm.sup.3 /sec.

Kramer, Daniel P. (Centerville, OH)

1992-09-01T23:59:59.000Z

373

ADVANCED TECHNIQUES FOR RESERVOIR SIMULATION AND MODELING OF NONCONVENTIONAL WELLS  

SciTech Connect (OSTI)

Nonconventional wells, which include horizontal, deviated, multilateral and ''smart'' wells, offer great potential for the efficient management of oil and gas reservoirs. These wells are able to contact larger regions of the reservoir than conventional wells and can also be used to target isolated hydrocarbon accumulations. The use of nonconventional wells instrumented with downhole inflow control devices allows for even greater flexibility in production. Because nonconventional wells can be very expensive to drill, complete and instrument, it is important to be able to optimize their deployment, which requires the accurate prediction of their performance. However, predictions of nonconventional well performance are often inaccurate. This is likely due to inadequacies in some of the reservoir engineering and reservoir simulation tools used to model and optimize nonconventional well performance. A number of new issues arise in the modeling and optimization of nonconventional wells. For example, the optimal use of downhole inflow control devices has not been addressed for practical problems. In addition, the impact of geological and engineering uncertainty (e.g., valve reliability) has not been previously considered. In order to model and optimize nonconventional wells in different settings, it is essential that the tools be implemented into a general reservoir simulator. This simulator must be sufficiently general and robust and must in addition be linked to a sophisticated well model. Our research under this five year project addressed all of the key areas indicated above. The overall project was divided into three main categories: (1) advanced reservoir simulation techniques for modeling nonconventional wells; (2) improved techniques for computing well productivity (for use in reservoir engineering calculations) and for coupling the well to the simulator (which includes the accurate calculation of well index and the modeling of multiphase flow in the wellbore); and (3) accurate approaches to account for the effects of reservoir heterogeneity and for the optimization of nonconventional well deployment. An overview of our progress in each of these main areas is as follows. A general purpose object-oriented research simulator (GPRS) was developed under this project. The GPRS code is managed using modern software management techniques and has been deployed to many companies and research institutions. The simulator includes general black-oil and compositional modeling modules. The formulation is general in that it allows for the selection of a wide variety of primary and secondary variables and accommodates varying degrees of solution implicitness. Specifically, we developed and implemented an IMPSAT procedure (implicit in pressure and saturation, explicit in all other variables) for compositional modeling as well as an adaptive implicit procedure. Both of these capabilities allow for efficiency gains through selective implicitness. The code treats cell connections through a general connection list, which allows it to accommodate both structured and unstructured grids. The GPRS code was written to be easily extendable so new modeling techniques can be readily incorporated. Along these lines, we developed a new dual porosity module compatible with the GPRS framework, as well as a new discrete fracture model applicable for fractured or faulted reservoirs. Both of these methods display substantial advantages over previous implementations. Further, we assessed the performance of different preconditioners in an attempt to improve the efficiency of the linear solver. As a result of this investigation, substantial improvements in solver performance were achieved.

Louis J. Durlofsky; Khalid Aziz

2004-08-20T23:59:59.000Z

374

Phenomena Identification and Ranking Technique (PIRT) Panel Meeting Summary Report  

SciTech Connect (OSTI)

Phenomena Identification and Ranking Technique (PIRT) is a systematic way of gathering information from experts on a specific subject and ranking the importance of the information. NRC, in collaboration with DOE and the working group, conducted the PIRT exercises to identify safety-relevant phenomena for NGNP, and to assess and rank the importance and knowledge base for each phenomenon. The overall objective was to provide NRC with an expert assessment of the safety-relevant NGNP phenomena, and an overall assessment of R and D needs for NGNP licensing. The PIRT process was applied to five major topical areas relevant to NGNP safety and licensing: (1) thermofluids and accident analysis (including neutronics), (2) fission product transport, (3) high temperature materials, (4) graphite, and (5) process heat for hydrogen cogeneration.

Mark Holbrook

2007-07-01T23:59:59.000Z

375

Sensitivity analysis techniques for models of human behavior.  

SciTech Connect (OSTI)

Human and social modeling has emerged as an important research area at Sandia National Laboratories due to its potential to improve national defense-related decision-making in the presence of uncertainty. To learn about which sensitivity analysis techniques are most suitable for models of human behavior, different promising methods were applied to an example model, tested, and compared. The example model simulates cognitive, behavioral, and social processes and interactions, and involves substantial nonlinearity, uncertainty, and variability. Results showed that some sensitivity analysis methods create similar results, and can thus be considered redundant. However, other methods, such as global methods that consider interactions between inputs, can generate insight not gained from traditional methods.

Bier, Asmeret Brooke

2010-09-01T23:59:59.000Z

376

Morphing the CMB: a technique for interpolating power spectra  

E-Print Network [OSTI]

The confrontation of the Cosmic Microwave Background (CMB) theoretical angular power spectrum with available data often requires the calculation of large numbers of power spectra. The standard practice is to use a fast code to compute the CMB power spectra over some large parameter space, in order to estimate likelihoods and constrain these parameters. But as the dimensionality of the space under study increases, then even with relatively fast anisotropy codes, the computation can become prohibitive. This paper describes the employment of a "morphing" strategy to interpolate new power spectra based on previously calculated ones. We simply present the basic idea here, and illustrate with a few examples; optimization of interpolation schemes will depend on the specific application. In addition to facilitating the exploration of large parameter spaces, this morphing technique may be helpful for Fisher matrix calculations involving derivatives.

Kris Sigurdson; Douglas Scott

2000-03-16T23:59:59.000Z

377

Preliminary study: isotopic safeguards techniques (IST) LMFBR fuel cycles  

SciTech Connect (OSTI)

This memorandum presents the preliminary results of the effort to investigate the applicability of isotope correlation techniques (ICT), formulated for the LWR system, to the LMFBR fuel cycle. The detailed isotopic compositional changes with burnup developed for the CRBR was utilized as the reference case. This differs from the usual LMFBR design studies in that the core uranium is natural uranium rather than depleted. Nevertheless, the general isotopic behavior should not differ significantly and does allow an initial insight into the expected behavior of isotopic correlations for the LMFBR power systems such as: the U.K. PFR and reprocessing plant; the French Phenix and Superphenix; and the US reference conceptual design studies (CDS) of homogeneous and heterogeneous LMFBR systems as they are developed.

Persiani, P.J.; Kroc, T.K.

1980-06-01T23:59:59.000Z

378

An inkjet vision measurement technique for high-frequency jetting  

SciTech Connect (OSTI)

Inkjet technology has been used as manufacturing a tool for printed electronics. To increase the productivity, the jetting frequency needs to be increased. When using high-frequency jetting, the printed pattern quality could be non-uniform since the jetting performance characteristics including the jetting speed and droplet volume could vary significantly with increases in jet frequency. Therefore, high-frequency jetting behavior must be evaluated properly for improvement. However, it is difficult to measure high-frequency jetting behavior using previous vision analysis methods, because subsequent droplets are close or even merged. In this paper, we present vision measurement techniques to evaluate the drop formation of high-frequency jetting. The proposed method is based on tracking target droplets such that subsequent droplets can be excluded in the image analysis by focusing on the target droplet. Finally, a frequency sweeping method for jetting speed and droplet volume is presented to understand the overall jetting frequency effects on jetting performance.

Kwon, Kye-Si, E-mail: kskwon@sch.ac.kr; Jang, Min-Hyuck; Park, Ha Yeong [Department of Mechanical Engineering, Soonchunhyang University 22, Soonchunhyang-Ro, Shinchang, Asan Chungnam 336-745 (Korea, Republic of); Ko, Hyun-Seok [Department of Electrical and Robot Engineering, Soonchunhyang University, 22, Soonchunhyang-Ro, Shinchang, Asan Chungnam 336-745 (Korea, Republic of)

2014-06-15T23:59:59.000Z

379

Using active database techniques for an advanced alarm processing  

SciTech Connect (OSTI)

An Advanced Alarm System (AAS) is primarily a digital system employing advanced alarm process logics and a VDU (Visual Display Unit) based control and display for the alarms. Active Database Systems (ADSs) are able to monitor a special situation represented by an event and one or more conditions. When the event occurs and the conditions are evaluated as true, the corresponding actions are executed. Hence, ADSs can recognize specific situations and react to them without direct explicit user or application requests. ADSs are very useful for timely applications such as the advanced, alarm processing. This paper proposes a new approach to the advanced alarm processing by using Event-Condition- Action(ECA) rules that can be automatically triggered by an active database. And this paper describes the design considerations and solution plan for advanced alarm processing by using active database techniques. (authors)

Jang, G. S. [I and C HFE Dept., Korea Atomic Energy Research Inst., 150, Duckjin-dong, Yusung-ku, Daejeon 305-353 (Korea, Republic of); Seong, D. H. [Samchang Enterprise Co., LTD, 974-1, Goyean-ri, Ulju-gun, Ulsan, 689-871 (Korea, Republic of); Keum, J. Y.; Park, H. Y. [I and C HFE Dept., Korea Atomic Energy Research Inst., 150, Duckjin-dong, Yusung-ku, Daejeon 305-353 (Korea, Republic of); Kim, Y. K. [Dept. of Computer Science, Chungnam National Univ., Daejeon, 305-764 (Korea, Republic of)

2006-07-01T23:59:59.000Z

380

Metal catalyst technique for texturing silicon solar cells  

DOE Patents [OSTI]

Textured silicon solar cells and techniques for their manufacture utilizing metal sources to catalyze formation of randomly distributed surface features such as nanoscale pyramidal and columnar structures. These structures include dimensions smaller than the wavelength of incident light, thereby resulting in a highly effective anti-reflective surface. According to the invention, metal sources present in a reactive ion etching chamber permit impurities (e.g. metal particles) to be introduced into a reactive ion etch plasma resulting in deposition of micro-masks on the surface of a substrate to be etched. Separate embodiments are disclosed including one in which the metal source includes one or more metal-coated substrates strategically positioned relative to the surface to be textured, and another in which the walls of the reaction chamber are pre-conditioned with a thin coating of metal catalyst material.

Ruby, Douglas S. (Albuquerque, NM); Zaidi, Saleem H. (Albuquerque, NM)

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Applying Data Privacy Techniques on Tabular Data in Uganda  

E-Print Network [OSTI]

The growth of Information Technology(IT) in Africa has led to an increase in the utilization of communication networks for data transaction across the continent. A growing number of entities in the private sector, academia, and government, have deployed the Internet as a medium to transact in data, routinely posting statistical and non statistical data online and thereby making many in Africa increasingly dependent on the Internet for data transactions. In the country of Uganda, exponential growth in data transaction has presented a new challenge: What is the most efficient way to implement data privacy. This article discusses data privacy challenges faced by the country of Uganda and implementation of data privacy techniques for published tabular data. We make the case for data privacy, survey concepts of data privacy, and implementations that could be employed to provide data privacy in Uganda.

Mivule, Kato

2011-01-01T23:59:59.000Z

382

Laser shockwave technique for characterization of nuclear fuel plate interfaces  

SciTech Connect (OSTI)

The US National Nuclear Security Agency is tasked with minimizing the worldwide use of high-enriched uranium. One aspect of that effort is the conversion of research reactors to monolithic fuel plates of low-enriched uranium. The manufacturing process includes hot isostatic press bonding of an aluminum cladding to the fuel foil. The Laser Shockwave Technique (LST) is here evaluated for characterizing the interface strength of fuel plates using depleted Uranium/Mo foils. LST is a non-contact method that uses lasers for the generation and detection of large amplitude acoustic waves and is therefore well adapted to the quality assurance of this process. Preliminary results show a clear signature of well-bonded and debonded interfaces and the method is able to classify/rank the bond strength of fuel plates prepared under different HIP conditions.

Perton, M.; Levesque, D.; Monchalin, J.-P.; Lord, M. [National Research Council Canada, 75 de Mortagne Blvd, Boucherville, Quebec, J4B 6Y4 (Canada); Smith, J. A.; Rabin, B. H. [Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 83415-6188 (United States)

2013-01-25T23:59:59.000Z

383

Laser Shockwave Technique For Characterization Of Nuclear Fuel Plate Interfaces  

SciTech Connect (OSTI)

The US National Nuclear Security Agency is tasked with minimizing the worldwide use of high-enriched uranium. One aspect of that effort is the conversion of research reactors to monolithic fuel plates of low-enriched uranium. The manufacturing process includes hot isostatic press bonding of an aluminum cladding to the fuel foil. The Laser Shockwave Technique (LST) is here evaluated for characterizing the interface strength of fuel plates using depleted Uranium/Mo foils. LST is a non-contact method that uses lasers for the generation and detection of large amplitude acoustic waves and is therefore well adapted to the quality assurance of this process. Preliminary results show a clear signature of well-bonded and debonded interfaces and the method is able to classify/rank the bond strength of fuel plates prepared under different HIP conditions.

James A. Smith; Barry H. Rabin; Mathieu Perton; Daniel Lvesque; Jean-Pierre Monchalin; Martin Lord

2012-07-01T23:59:59.000Z

384

Adsorption and grafting on colloidal interfaces studied by scattering techniques  

E-Print Network [OSTI]

The adsorption of polymer and surfactant molecules onto colloidal particles or droplets in solution can be characterized non-destructively by scattering techniques. In a first part, the general framework of Dynamic Light Scattering, Small Angle Neutron and X-ray Scattering for the determination of the structure of adsorbed layers, and namely of the density profile, is presented. We then review recent studies of layers of the model polymer poly(ethylene oxide), as homopolymer or part of a block copolymer. In this field, scattering with contrast variation has been shown to be a powerful tool to obtain a detailed description of the layer structure. Adsorption of chemically more complex systems, including polyelectrolytes, polymer complexes, grafted chains and biomacromolecules are also discussed in this review, as well as surfactant adsorption.

Julian Oberdisse

2007-05-23T23:59:59.000Z

385

The time-of-flight technique for the HERMES experiment  

E-Print Network [OSTI]

This paper describes the use of the time-of-flight (TOF) technique as a particle identification method for the HERMES experiment. The time-of-flight is measured by two 1x4 m^2 scintillation hodoscopes that initially were designed for the first-level trigger only. However, the suitable time structure of the HERA electron beam allows an extension of their functions to also measure the TOF for low momentum hadron identification. Using only these conventional hodoscopes, good particle identification was achieved for protons and pions in the momentum range up to 2.9GeV/c and for kaons up to 1.5GeV/c.

Airapetian, A; Avetisian, A; Zohrabyan, H G; Amarian, M; Avakian, H; Avetisyan, E; Filippone, B W; Kaiser, R

2002-01-01T23:59:59.000Z

386

The Time-of-Flight Technique for the HERMES Experiment  

E-Print Network [OSTI]

This paper describes the use of the time-of-flight (TOF) technique as a particle identification method for the HERMES experiment. The time-of-flight is measured by two 1x4 m^2 scintillation hodoscopes that initially were designed for the first-level trigger only. However, the suitable time structure of the HERA electron beam allows an extension of their functions to also measure the TOF for low momentum hadron identification. Using only these conventional hodoscopes, good particle identification was achieved for protons and pions in the momentum range up to 2.9GeV/c and for kaons up to 1.5GeV/c.

HERMES Collaboration; A. Airapetian; N. Akopov; M. Amarian; H. Avakian; A. Avetissian; E. Avetisyan; B. W. Filippone; R. Kaiser; H. Zohrabian

2004-11-16T23:59:59.000Z

387

A Survey on Dynamic Spectrum Access Techniques for Cognitive Radio  

E-Print Network [OSTI]

Cognitive radio (CR) is a new paradigm that utilizes the available spectrum band. The key characteristic of CR system is to sense the electromagnetic environment to adapt their operation and dynamically vary its radio operating parameters. The technique of dynamically accessing the unused spectrum band is known as Dynamic Spectrum Access (DSA). The dynamic spectrum access technology helps to minimize unused spectrum bands. In this paper, main functions of Cognitive Radio (CR) i.e. spectrum sensing, spectrum management, spectrum mobility and spectrum sharing are discussed. Then DSA models are discussed along with different methods of DSA such as Command and Control, Exclusive-Use, Shared Use of Primary Licensed User and Commons method. Game-theoretic approach using Bertrand game model, Markovian Queuing Model for spectrum allocation in centralized architecture and Fuzzy logic based method are also discussed and result are shown.

Garhwal, Anita

2012-01-01T23:59:59.000Z

388

Optimization Digital Image Watermarking Technique for Patent Protection  

E-Print Network [OSTI]

The rapid development of multimedia and internet allows for wide distribution of digital media data. It becomes much easier to edit, modify and duplicate digital information besides that, digital documents are also easy to copy and distribute, therefore it will be faced by many threats. It is a big security and privacy issue. Another problem with digital document and video is that undetectable modifications can be made with very simple and widely available equipment, which put the digital material for evidential purposes under question With the large flood of information and the development of the digital format, it become necessary to find appropriate protection because of the significance, accuracy and sensitivity of the information, therefore multimedia technology and popularity of internet communications they have great interest in using digital watermarks for the purpose of copy protection and content authentication. Digital watermarking is a technique used to embed a known piece of digital data within a...

Elnajjar, Mahmoud; Zaidan, B B; Sharif, Mohamed Elhadi M; Alanazi, Hamdan O

2010-01-01T23:59:59.000Z

389

Spectral Techniques for Solving PDE Stability Model of Vortex Rope  

E-Print Network [OSTI]

In this paper spectral methods are applied to investigate the hydrodynamic instability of swirling flow with application to Francis hydraulic turbine. Spectral methods imply representing the problem solution as truncated series of smooth global functions. An L2 - projection and the collocation methods are developed assessing both analytically methodology and computational techniques using symbolic and numerical conversions. Remarks concerning the efficiency and the accuracy of each method in this case are presented. The model of the trailing vortex is used to validate the numerical algorithms with existing results in the literature. All the results are compared to existing ones and they prove to agree quite well. The advantages of using this methods in flow control problems are pointed out.

Bistrian, Diana Alina

2012-01-01T23:59:59.000Z

390

Winding expansion techniques for lattice QCD with chemical potential  

E-Print Network [OSTI]

We analytically derive a decomposition of the lattice fermion determinant for Wilson's Dirac operator with chemical potential into winding sectors, i.e., factors with a fixed number of quarks. Dividing the lattice into four domains, the determinant is factorized into terms which can be classified with respect to the winding number of the closed loops they consist of. The individual factors are expressed in terms of subdeterminants and propagators on the domains of the lattice. We numerically analyze properties of the factorization formula and discuss two applications for the determination of canonical partition functions with a fixed quark number: A speedup for the Fourier transformation technique through a dimensional reduction, and a power series expansion.

Julia Danzer; Christof Gattringer

2008-09-16T23:59:59.000Z

391

Hierarchical probabilistic regionalization of volcanism for Sengan region in Japan using multivariate statistical techniques and geostatistical interpolation techniques.  

SciTech Connect (OSTI)

Sandia National Laboratories, under contract to Nuclear Waste Management Organization of Japan (NUMO), is performing research on regional classification of given sites in Japan with respect to potential volcanic disruption using multivariate statistics and geo-statistical interpolation techniques. This report provides results obtained for hierarchical probabilistic regionalization of volcanism for the Sengan region in Japan by applying multivariate statistical techniques and geostatistical interpolation techniques on the geologic data provided by NUMO. A workshop report produced in September 2003 by Sandia National Laboratories (Arnold et al., 2003) on volcanism lists a set of most important geologic variables as well as some secondary information related to volcanism. Geologic data extracted for the Sengan region in Japan from the data provided by NUMO revealed that data are not available at the same locations for all the important geologic variables. In other words, the geologic variable vectors were found to be incomplete spatially. However, it is necessary to have complete geologic variable vectors to perform multivariate statistical analyses. As a first step towards constructing complete geologic variable vectors, the Universal Transverse Mercator (UTM) zone 54 projected coordinate system and a 1 km square regular grid system were selected. The data available for each geologic variable on a geographic coordinate system were transferred to the aforementioned grid system. Also the recorded data on volcanic activity for Sengan region were produced on the same grid system. Each geologic variable map was compared with the recorded volcanic activity map to determine the geologic variables that are most important for volcanism. In the regionalized classification procedure, this step is known as the variable selection step. The following variables were determined as most important for volcanism: geothermal gradient, groundwater temperature, heat discharge, groundwater pH value, presence of volcanic rocks and presence of hydrothermal alteration. Data available for each of these important geologic variables were used to perform directional variogram modeling and kriging to estimate values for each variable at 23949 centers of the chosen 1 km cell grid system that represents the Sengan region. These values formed complete geologic variable vectors at each of the 23,949 one km cell centers.

Park, Jinyong (University of Arizona, Tucson, AZ); Balasingham, P. (University of Arizona, Tucson, AZ); McKenna, Sean Andrew; Kulatilake, Pinnaduwa H. S. W. (University of Arizona, Tucson, AZ)

2004-09-01T23:59:59.000Z

392

Synthesis and characterization of carbon nanotubes using scanning probe based nano-lithographic techniques  

E-Print Network [OSTI]

A novel process which does not require the traditional Chemical Vapor Deposition (CVD) synthesis techniques and which works at temperatures lower than the conventional techniques was developed for synthesis of carbon nanotubes (CNT). The substrates...

Gargate, Rohit Vasant

2009-05-15T23:59:59.000Z

393

Using Visualization Techniques and Gamification to Involve Users in Requirements Elicitation  

E-Print Network [OSTI]

Using Visualization Techniques and Gamification to Involve Users in Requirements Elicitation Diogo of visualization techniques and gamification. Requirements visualizations are used to stimulate stakeholders and increase their awareness about requirements. Social visualization and gamification of the elicitation

da Silva, Alberto Rodrigues

394

Simulation and Modeling Techniques for Signal Integrity and Electromagnetic Interference on High Frequency Electronic Systems.  

E-Print Network [OSTI]

Simulation and Modeling Techniques for Signal Integrity and Electromagnetic Interference on High and Modeling Techniques for Signal Integrity and Electromagnetic Interference on High Frequency Electronic Integrity and Electromagnetic Interference on High Frequency Electronic Systems. by Luca Daniel Doctor

Daniel, Luca

395

EVALUATION TECHNIQUE IN THE SPI-CALCULUS FOR CRYPTOGRAPHIC PROTOCOLS Hasan M. Al-Refai  

E-Print Network [OSTI]

EVALUATION TECHNIQUE IN THE SPI-CALCULUS FOR CRYPTOGRAPHIC PROTOCOLS Hasan M. Al-Refai halrefai@philadelphia.edu.jo Hasan_alrefai@yahoo.com Mobile Phone #: 00962-777357755 Abstract Bisimulation as a technique could

396

Measurement of laser frequency response through heterodyne technique using optical modulation  

E-Print Network [OSTI]

An optical modulation technique for measuring the parasitic-free frequency response of high frequency semiconductor lasers is demonstrated. In this technique, we heterodyne light from two continuously tunable external cavity travelling wave ring...

Ahmed, Syed Faisal

1994-01-01T23:59:59.000Z

397

New Technique Gives a Deeper Look into the Chemistry of Interfaces  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

New Technique Gives a Deeper Look into the Chemistry of Interfaces Print A new technique developed at the ALS offers sub-nanometer depth resolution of every chemical element to be...

398

A Superconducting Joint Technique for MgB[subscript 2] Round Wires  

E-Print Network [OSTI]

This paper describes a technique to superconductively splice multifilament MgB2 wires. To date the technique has achieved joints capable of carrying a superconducting current of 200 A at 10 K in self field. Joints details, ...

Yao, Weijun

399

Partial order techniques for vehicle collision avoidance: application to an autonomous roundabout test-bed  

E-Print Network [OSTI]

In this paper, we employ partial order techniques to develop linear complexity algorithms for guaranteed collision avoidance between vehicles at highway and roundabout mergings. These techniques can be employed by virtue ...

Desaraju, Vishnu Rajeswar

400

Solid-Cryogen Cooling Technique for Superconducting Magnets of NMR and MRI  

E-Print Network [OSTI]

This paper describes a solid-cryogen cooling technique currently being developed at the M.I.T. Francis Bitter Magnet Laboratory for application to superconducting magnets of NMR and MRI. The technique is particularly ...

Iwasa, Yukikazu

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Spatio-temporal analysis of Texas shoreline changes using GIS technique  

E-Print Network [OSTI]

techniques used to study shoreline evolution are generally based on transects perpendicular to a baseline at selected points. But these techniques proved to be less efficient along more complex shorelines, and need to be refined. A new and more reliable...

Arias Moran, Cesar Augusto

2004-09-30T23:59:59.000Z

402

CONTROL ID: 1469463 TITLE: In Situ Techniques for Mineralogy and Geochemistry of Small Bodies  

E-Print Network [OSTI]

CONTROL ID: 1469463 TITLE: In Situ Techniques for Mineralogy and Geochemistry of Small Bodies information about their formation histories and evolution. Combined geochemistry and mineralogy measurements measurement techniques that could provide microscopic mineralogy and isotope geochemistry. We will discuss

Rossman. George R.

403

Theoretical and practical aspects of linear and nonlinear model order reduction techniques  

E-Print Network [OSTI]

Model order reduction methods have proved to be an important technique for accelerating time-domain simulation in a variety of computer-aided design tools. In this study we present several new techniques for model reduction ...

Vasilyev, Dmitry Missiuro

2008-01-01T23:59:59.000Z

404

E-Print Network 3.0 - advanced fabrication techniques Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Centre de mathmatiques Collection: Mathematics 62 Kompetenzzentrum fr Automobil-und Industrieelektronik Summary: . As new materials and fabrication techniques are...

405

E-Print Network 3.0 - angle scattering techniques Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

angle ... Source: Ecole Polytechnique, Centre de mathmatiques Collection: Mathematics 2 Neutron Scattering in Polymer Micelle Characterization Summary: - Nondestructive technique...

406

Feedback reduction techniques and fairness in multi-user MIMO broadcast channels with random beamforming  

E-Print Network [OSTI]

the Feedback . . . . . . . . . . . . . . . . . 2.72.5 MMSE Receivers and Feedback . . . . . . . . . . .1.2.1 Feedback Reduction Techniques Exploiting Spa- tial

Pugh, Matthew Owen

2011-01-01T23:59:59.000Z

407

Krylov Techniques for 3D Problems in Transport Theory  

SciTech Connect (OSTI)

When solving integral-differential equations by means of numerical methods one has to deal with large systems of linear equations, such as happens in transport theory [10]. Many iterative techniques are now used in Transport Theory in order to solve problems of 2D and 3D dimensions. In this paper, we choose two problems to solve the following transport equation, [Equation] where x: represents the spatial variable, {mu}: the cosine of the angle, {psi}: the angular flux, h(x, {mu}): is the collision frequency, k(x, {mu}, {mu}'): the scattering kernel, q(x, {mu}): the source. The aim of this work is the straightforward application of the Krylov spaces technique [2] to the governing equation or to its discretizations derived of the discrete ordinates method (choosing a finite number of directions and then approximating the integral term by means of a proper sum). The equation (1) can be written in functional form as [Equation] with {psi} in the Hilbert space L{sup 2} ([0,a] x [-1,1])., and q is the source function. The operator derived from a discrete ordinates scheme that approximates the operator [Equation] generates the following subspace [Equation] i.e. the subspace generated by the iterations of order 0, 1, 2,..., m-1 of the source function q. Two methods are specially outstanding, the Lanczos method to solve the problem given by equation (2) with certain boundary conditions, and the conjugate gradient method to solve the same problem with identical boundary conditions. We discuss and accelerate the basic iterative method [8]. An important conclusion is the generation of these methods to solve linear systems in Hilbert spaces, if verify the convergence conditions, which are outlined in this work. The first problem is a cubic domain with two regions, one with a source near the vertex at the origin and the shield region. In this case, the Cartesian planes (specifically 0

Ruben Panta Pazos [Department of Mathematics, UNISC - Universidade de Santa Cruz do Sul Av. Independencia, 2293 Bairro Universitario (Brazil)

2006-07-01T23:59:59.000Z

408

Power Optimization Using Divide-and-Conquer Techniques for Minimization of  

E-Print Network [OSTI]

Power Optimization Using Divide-and- Conquer Techniques for Minimization of the Number University of Massachusetts at Amherst We introduce an approach for power optimization using a set-and-conquer compilation technique to minimize the number of operations for general computations. Our technique optimizes

Potkonjak, Miodrag

409

A novel taxonomy for gestural interaction techniques: considerations for automotive environments  

E-Print Network [OSTI]

A novel taxonomy for gestural interaction techniques: considerations for automotive environments to analyze the applicability of these techniques on automotive environment. The taxon- omy plots a gestural into automotive environment rise the necessity to analyze gestural interaction technique from their cognitive load

Paris-Sud XI, Université de

410

8/19/2002 Data Mining: Foundation, Techniques and Applications 1 Data Mining: Foundation,  

E-Print Network [OSTI]

8/19/2002 Data Mining: Foundation, Techniques and Applications 1 Data Mining: Foundation;12/3/2007 Data Mining: Foundation, Techniques and Applications 2 Outline Introduction Foundation Graph Similarity for Keyword Search #12;12/3/2007 Data Mining: Foundation, Techniques and Applications 3 Graph, Graph

Tung, Anthony Kum Hoe

411

Data Mining: Concepts and TechniquesFebruary 19, 2008 1 Data Mining  

E-Print Network [OSTI]

Data Mining: Concepts and TechniquesFebruary 19, 2008 1 Data Mining: Concepts and Techniques.cs.uiuc.edu/~hanj 2006 Jiawei Han and Micheline Kamber, All rights reserved #12;Data Mining: Concepts and TechniquesFebruary 19, 2008 2 Chapter 2: Data Preprocessing Why preprocess the data? Descriptive data summarization

Raghavan, Vijay

412

An Investigation of the Latent Semantic Analysis Technique for Document Retrieval  

E-Print Network [OSTI]

An Investigation of the Latent Semantic Analysis Technique for Document Retrieval STUDENT PROJECT;_________________________________________________________________________ An Investigation of the Latent Semantic Analysis Technique for Document Retrieval. Report by: David Mugo Page 2. These term-matching techniques have always relied on matching query terms with document terms to retrieve

413

A graphical technique for explaining the relationship between energy security and greenhouse gas emissions  

E-Print Network [OSTI]

ERG/200806 A graphical technique for explaining the relationship between energy security and the differences between energy security and greenhouse gas emissions. This paper presents a graphical technique. This paper presents a graphical technique for illustrating the relationship between energy security

Hughes, Larry

414

An Experimental Study of Film Cooling Effectiveness by Using PIV and PSP Techniques  

E-Print Network [OSTI]

An Experimental Study of Film Cooling Effectiveness by Using PIV and PSP Techniques Blake Johnson1 temperatures is necessary, typically through the implementation of film-cooling techniques. Optimization cooling has been studied widely through use of a number of experimental techniques, including infrared (IR

Hu, Hui

415

A critical review of cooling techniques in proton exchange membrane fuel cell stacks  

E-Print Network [OSTI]

Review A critical review of cooling techniques in proton exchange membrane fuel cell stacks of a cooling system. To promote the development of effective cooling strategies, cooling techniques reported, challenges and progress of various cooling techniques, including (i) cooling with heat spreaders (using high

Kandlikar, Satish

416

3630 IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, VOL. 54, NO. 10, OCTOBER 2006 Nonlinear Design Technique for High-Power  

E-Print Network [OSTI]

-state stability are analyzed with the pole-zero identification technique. The influence of the gate bias and the approximate calculation of the transistor phase shift make the technique difficult to apply to high-frequency os- cillators. In [5] and [6], an experimentally tunable feedback net- work is added to standalone

417

Vibration energy harvesting is an attractive technique for the potential powering of wireless sensors and low power devices. While the technique can be employed to  

E-Print Network [OSTI]

ABSTRACT Vibration energy harvesting is an attractive technique for the potential powering of wireless sensors and low power devices. While the technique can be employed to harvest energy from ambient transfer mechanism is that the vibration energy harvesting device operate in resonance at the excitation

Fisher, Frank

418

T.T.T.Nguyen, G.Armitage, A Survey of Techniques for Internet Traffic Classification using Machine Learning A Survey of Techniques for Internet Traffic  

E-Print Network [OSTI]

of their various business goals. Traffic classification may be a core part of automated intrusion detection systemsT.T.T.Nguyen, G.Armitage, A Survey of Techniques for Internet Traffic Classification using Machine Learning A Survey of Techniques for Internet Traffic Classification using Machine Learning Thuy T.T. Nguyen

Armitage, Grenville

419

TECHNIQUES FOR THE STUDY OF THE ELECTRONIC PROPERTIES.  

SciTech Connect (OSTI)

The electronic structure of a solid is affected by size and altered from the continuous electronic levels forming a band, characteristic of bulk or microsized solids, to discrete-like or quantized levels. This is drastically observed when the particle size goes down to the nano-meter range and is the origin of the so-called ''quantum confinement'' terminology referring to this phenomenon. From a solid state point of view, electronic states of confined materials can be considered as being a superposition of bulk-like states with a concomitant increase of the oscillator strength. The valence/conduction band-width and position observables of a solid oxide are functions of the crystal potential and this, in turn, is perturbed by effect of the size in two ways; a short-range effect induced by the presence of ions with a different coordination number and bond distance, and a large-range one, induced by changes in the Madelung potential of the oxide. Theoretical analyses for oxides show a redistribution of charge when going from large periodic structures to small clusters which is roughly considered small for ionic solids and significantly important for covalent ones. Chapter 1 of this book describes the most recent theoretical frameworks employed to deal with these physical phenomena while here we will describe their influence in physico-chemical observables obtained by spectroscopical techniques.

FERNANDEZ-GARCIA, M.; RODRIGUEZ, J.A.

2006-06-30T23:59:59.000Z

420

Technique for the identification of dominant delayed neutron precursors.  

SciTech Connect (OSTI)

A technique for the identification of delayed neutron precursors has been developed based on the product of cumulative yield and probability of neutron emission. The motivation behind this work is to fix the decay constants of delayed neutrons to those of the dominant delayed neutron precursors. The desirability of identifying a single set of decay constants that would apply to all fissionable isotopes and be independent of the neutron energy spectrum has been addressed by several authors. The main advantages of a fixed-decay constant representation are simplifying the analysis of epithemal and fast reactors with multiple fissioning isotopes, and improving the fit to experimental data while preserving the inferred positive reactivity scale associated with the original six-group representation. It is well known that 27 1 delayed neutron precursors exist, but only a select number of those precursors contribute significantly to the decay of delayed neutron. Using data compiled by England and Rider, which lists fission yield and probability of neutron emission values for the 27 1 known delayed neutron precursors in 32 fissioning systems, thirteen precursors were identified that are consistently dominant for alI fissioning systems.

Loaiza, D. J. (David J.); Haskin, E. (Eric)

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Damage detection technique by measuring laser-based mechanical impedance  

SciTech Connect (OSTI)

This study proposes a method for measurement of mechanical impedance using noncontact laser ultrasound. The measurement of mechanical impedance has been of great interest in nondestructive testing (NDT) or structural health monitoring (SHM) since mechanical impedance is sensitive even to small-sized structural defects. Conventional impedance measurements, however, have been based on electromechanical impedance (EMI) using contact-type piezoelectric transducers, which show deteriorated performances induced by the effects of a) Curie temperature limitations, b) electromagnetic interference (EMI), c) bonding layers and etc. This study aims to tackle the limitations of conventional EMI measurement by utilizing laser-based mechanical impedance (LMI) measurement. The LMI response, which is equivalent to a steady-state ultrasound response, is generated by shooting the pulse laser beam to the target structure, and is acquired by measuring the out-of-plane velocity using a laser vibrometer. The formation of the LMI response is observed through the thermo-mechanical finite element analysis. The feasibility of applying the LMI technique for damage detection is experimentally verified using a pipe specimen under high temperature environment.

Lee, Hyeonseok; Sohn, Hoon [Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology (Daehak-ro 291, Yuseong-gu, Daejeon 305-701) (Korea, Republic of)

2014-02-18T23:59:59.000Z

422

Stratified source-sampling techniques for Monte Carlo eigenvalue analysis.  

SciTech Connect (OSTI)

In 1995, at a conference on criticality safety, a special session was devoted to the Monte Carlo ''Eigenvalue of the World'' problem. Argonne presented a paper, at that session, in which the anomalies originally observed in that problem were reproduced in a much simplified model-problem configuration, and removed by a version of stratified source-sampling. In this paper, stratified source-sampling techniques are generalized and applied to three different Eigenvalue of the World configurations which take into account real-world statistical noise sources not included in the model problem, but which differ in the amount of neutronic coupling among the constituents of each configuration. It is concluded that, in Monte Carlo eigenvalue analysis of loosely-coupled arrays, the use of stratified source-sampling reduces the probability of encountering an anomalous result over that if conventional source-sampling methods are used. However, this gain in reliability is substantially less than that observed in the model-problem results.

Mohamed, A.

1998-07-10T23:59:59.000Z

423

Sensitivity-analysis techniques: self-teaching curriculum  

SciTech Connect (OSTI)

This self teaching curriculum on sensitivity analysis techniques consists of three parts: (1) Use of the Latin Hypercube Sampling Program (Iman, Davenport and Ziegler, Latin Hypercube Sampling (Program User's Guide), SAND79-1473, January 1980); (2) Use of the Stepwise Regression Program (Iman, et al., Stepwise Regression with PRESS and Rank Regression (Program User's Guide) SAND79-1472, January 1980); and (3) Application of the procedures to sensitivity and uncertainty analyses of the groundwater transport model MWFT/DVM (Campbell, Iman and Reeves, Risk Methodology for Geologic Disposal of Radioactive Waste - Transport Model Sensitivity Analysis; SAND80-0644, NUREG/CR-1377, June 1980: Campbell, Longsine, and Reeves, The Distributed Velocity Method of Solving the Convective-Dispersion Equation, SAND80-0717, NUREG/CR-1376, July 1980). This curriculum is one in a series developed by Sandia National Laboratories for transfer of the capability to use the technology developed under the NRC funded High Level Waste Methodology Development Program.

Iman, R.L.; Conover, W.J.

1982-06-01T23:59:59.000Z

424

Improved parallel solution techniques for the integral transport matrix method  

SciTech Connect (OSTI)

Alternative solution strategies to the parallel block Jacobi (PBJ) method for the solution of the global problem with the integral transport matrix method operators have been designed and tested. The most straightforward improvement to the Jacobi iterative method is the Gauss-Seidel alternative. The parallel red-black Gauss-Seidel (PGS) algorithm can improve on the number of iterations and reduce work per iteration by applying an alternating red-black color-set to the subdomains and assigning multiple sub-domains per processor. A parallel GMRES(m) method was implemented as an alternative to stationary iterations. Computational results show that the PGS method can improve on the PBJ method execution by up to {approx}50% when eight sub-domains per processor are used. However, compared to traditional source iterations with diffusion synthetic acceleration, it is still approximately an order of magnitude slower. The best-performing case are opticaUy thick because sub-domains decouple, yielding faster convergence. Further tests revealed that 64 sub-domains per processor was the best performing level of sub-domain division. An acceleration technique that improves the convergence rate would greatly improve the ITMM. The GMRES(m) method with a diagonal block preconditioner consumes approximately the same time as the PBJ solver but could be improved by an as yet undeveloped, more efficient preconditioner.

Zerr, Robert J [Los Alamos National Laboratory; Azmy, Yousry Y [NORTH CAROLINA STATE UNIV.

2010-11-23T23:59:59.000Z

425

A comparison of spotlight synthetic aperture radar image formation techniques  

SciTech Connect (OSTI)

Spotlight synthetic aperture radar images can be formed from the complex phase history data using two main techniques: (1) polar-to-cartesian interpolation followed by two-dimensional inverse Fourier transform (2DFFT), and (2) convolution backprojection (CBP). CBP has been widely used to reconstruct medical images in computer aided tomography, and only recently has been applied to form synthetic aperture radar imagery. It is alleged that CBP yields higher quality images because (1) all the Fourier data are used and (2) the polar formatted data is used directly to form a 2D Cartesian image and therefore 2D interpolation is not required. This report compares the quality of images formed by CBP and several modified versions of the 2DFFT method. We show from an image quality point of view that CBP is equivalent to first windowing the phase history data and then interpolating to an exscribed rectangle. From a mathematical perspective, we should expect this conclusion since the same Fourier data are used to form the SAR image. We next address the issue of parallel implementation of each algorithm. We dispute previous claims that CBP is more readily parallelizable than the 2DFFT method. Our conclusions are supported by comparing execution times between massively parallel implementations of both algorithms, showing that both experience similar decreases in computation time, but that CBP takes significantly longer to form an image.

Knittle, C.D.; Doren, N.E.; Jakowatz, C.V.

1996-10-01T23:59:59.000Z

426

High pressure discharges in cavities formed by microfabrication techniques  

SciTech Connect (OSTI)

High pressure discharges are the basis of small high intensity light sources. In this work, we demonstrate the formation of high pressure discharges, in cavities formed by applying micromachining and integrated circuit techniques to quartz substrates. Cavities containing varying amounts of mercury and argon were fabricated to obtain high pressure discharges. A high pressure mercury discharge was formed in the electrodeless cavities by exciting them with a microwave source, operating at 2.45 GHz and in the electroded cavities by applying a dc voltage. The contraction of the discharge into a high pressure arc was observed. A broad emission spectrum due to self-absorption and collisions between excited atoms and normal atoms, typical of high pressure mercury discharges, was measured. The light output and efficacy increased with increasing pressure. The measured voltage was used to estimate the pressure within the electroded cavities, which is as high as 127 atm for one of the two cavities discussed in this work. Efficacies over 40 lumens per watt were obtained for the electrodeless cavities and over 50 scr(l)m/W for the electroded cavities. {copyright} {ital 1997 American Institute of Physics.}

Khan, B.A.; Cammack, D.A.; Pinker, R.D.; Racz, J. [Philips Electronics North America Corporation, Philips Research, Briarcliff Manor, New York 10510 (United States)] [Philips Electronics North America Corporation, Philips Research, Briarcliff Manor, New York 10510 (United States)

1997-07-01T23:59:59.000Z

427

Directional drilling equipment and techniques for deep hot granite wells  

SciTech Connect (OSTI)

Conventional directional drilling technology has been extended and modified to drill the first well of a subsurface geothermal energy extraction system at the Fenton Hill, New Mexico, Hot dry Rock (HDR) experimental site. Completing the first of a two-wellbore HDR system has resulted in the definition of operational limitations of many conventional directional drilling tools, instrumentation and techniques. The successful completion of the first wellbore, Energy Extraction Well No. 2 (EE-2), to a measured depth of 15,300 ft (4.7 km) in granite reservoir rock with a bottomhole temperature of 530/sup 0/F (275/sup 0/C) required the development of a new high temperature downhole motor and modification of existing wireline-conveyed steering tool systems. Conventional rotary-driven directional assemblies were successfully modified to accommodate the very hard and abrasive rock encountered while drilling nearly 8500 ft (2.6 km) of directional hole to a final inclination of 35/sup 0/ from the vertical at a controlled azimuthal orientation.

Brittenham, T.L.; Sursen, G.; Neudecker, J.W.; Rowley, J.C.; Williams, R.E.

1980-01-01T23:59:59.000Z

428

Electro-osmotic infusion for joule heating soil remediation techniques  

DOE Patents [OSTI]

Electro-osmotic infusion of ground water or chemically tailored electrolyte is used to enhance, maintain, or recondition electrical conductivity for the joule heating remediation technique. Induced flows can be used to infuse electrolyte with enhanced ionic conductivity into the vicinity of the electrodes, maintain the local saturation of near-electrode regions and resaturate a partially dried out zone with groundwater. Electro-osmotic infusion can also tailor the conductivity throughout the target layer by infusing chemically modified and/or heated electrolyte to improve conductivity contrast of the interior. Periodic polarity reversals will prevent large pH changes at the electrodes. Electro-osmotic infusion can be used to condition the electrical conductivity of the soil, particularly low permeability soil, before and during the heating operation. Electro-osmotic infusion is carried out by locating one or more electrodes adjacent the heating electrodes and applying a dc potential between two or more electrodes. Depending on the polarities of the electrodes, the induced flow will be toward the heating electrodes or away from the heating electrodes. In addition, electrodes carrying a dc potential may be located throughout the target area to tailor the conductivity of the target area.

Carrigan, Charles R. (Tracy, CA); Nitao, John J. (Castro Valley, CA)

1999-01-01T23:59:59.000Z

429

Development of advanced strain diagnostic techniques for reactor environments.  

SciTech Connect (OSTI)

The following research is operated as a Laboratory Directed Research and Development (LDRD) initiative at Sandia National Laboratories. The long-term goals of the program include sophisticated diagnostics of advanced fuels testing for nuclear reactors for the Department of Energy (DOE) Gen IV program, with the future capability to provide real-time measurement of strain in fuel rod cladding during operation in situ at any research or power reactor in the United States. By quantifying the stress and strain in fuel rods, it is possible to significantly improve fuel rod design, and consequently, to improve the performance and lifetime of the cladding. During the past year of this program, two sets of experiments were performed: small-scale tests to ensure reliability of the gages, and reactor pulse experiments involving the most viable samples in the Annulated Core Research Reactor (ACRR), located onsite at Sandia. Strain measurement techniques that can provide useful data in the extreme environment of a nuclear reactor core are needed to characterize nuclear fuel rods. This report documents the progression of solutions to this issue that were explored for feasibility in FY12 at Sandia National Laboratories, Albuquerque, NM.

Fleming, Darryn D.; Holschuh, Thomas Vernon,; Miller, Timothy J.; Hall, Aaron Christopher; Urrea, David Anthony,; Parma, Edward J.,

2013-02-01T23:59:59.000Z

430

Novel microsystem applications with new techniques in LTCC.  

SciTech Connect (OSTI)

Low-temperature co-fired ceramic (LTCC) enables development and testing of critical elements on microsystem boards as well as nonmicroelectronic meso-scale applications. We describe silicon-based microelectromechanical systems packaging and LTCC meso-scale applications. Microfluidic interposers permit rapid testing of varied silicon designs. The application of LTCC to micro-high-performance liquid chromatography (?-HPLC) demonstrates performance advantages at very high pressures. At intermediate pressures, a ceramic thermal cell lyser has lysed bacteria spores without damaging the proteins. The stability and sensitivity of LTCC/chemiresistor smart channels are comparable to the performance of silicon-based chemiresistors. A variant of the use of sacrificial volume materials has created channels, suspended thick films, cavities, and techniques for pressure and flow sensing. We report on inductors, diaphragms, cantilevers, antennae, switch structures, and thermal sensors suspended in air. The development of 'functional-as-released' moving parts has resulted in wheels, impellers, tethered plates, and related new LTCC mechanical roles for actuation and sensing. High-temperature metal-to-LTCC joining has been developed with metal thin films for the strong, hermetic interfaces necessary for pins, leads, and tubes.

Nordquist, Christopher Daniel; Peterson, Kenneth Allen; Patel, Kamlesh D.; Okandan, Murat; Rohde, Steven Barney; Ho, Clifford Kuofei; Wroblewski, Brian D.; Walker, Charles A.

2005-04-01T23:59:59.000Z

431

ULTRA-COMPACT ACCELERATOR TECHNOLOGIES FOR APPLICATION IN NUCLEAR TECHNIQUES  

SciTech Connect (OSTI)

We report on compact accelerator technology development for potential use as a pulsed neutron source quantitative post verifier. The technology is derived from our on-going compact accelerator technology development program for radiography under the US Department of Energy and for a clinic sized compact proton therapy systems under an industry sponsored Cooperative Research and Development Agreement. The accelerator technique relies on the synchronous discharge of a prompt pulse generating stacked transmission line structure with the beam transit. The goal of this technology is to achieve {approx}10 MV/m gradients for 10s of nanoseconds pulses and to {approx}100 MV/m gradients for {approx}1 ns systems. As a post verifier for supplementing existing x-ray equipment, this system can remain in a charged, stand-by state with little or no energy consumption. We detail the progress of our overall component development effort with the multilayer dielectric wall insulators (i.e., the accelerator wall), compact power supply technology, kHz repetition-rate surface flashover ion sources, and the prompt pulse generation system consisting of wide-bandgap switches and high performance dielectric materials.

Sampayan, S; Caporaso, G; Chen, Y; Carazo, V; Falabella, S; Guethlein, G; Guse, S; Harris, J R; Hawkins, S; Holmes, C; Krogh, M; Nelson, S; Paul, A C; Pearson, D; Poole, B; Schmidt, R; Sanders, D; Selenes, K; Sitaraman, S; Sullivan, J; Wang, L; Watson, J

2009-06-11T23:59:59.000Z

432

Development of structural health monitoring techniques using dynamics testing  

SciTech Connect (OSTI)

Today`s society depends upon many structures (such as aircraft, bridges, wind turbines, offshore platforms, buildings, and nuclear weapons) which are nearing the end of their design lifetime. Since these structures cannot be economically replaced, techniques for structural health monitoring must be developed and implemented. Modal and structural dynamics measurements hold promise for the global non-destructive inspection of a variety of structures since surface measurements of a vibrating structure can provide information about the health of the internal members without costly (or impossible) dismantling of the structure. In order to develop structural health monitoring for application to operational structures, developments in four areas have been undertaken within this project: operational evaluation, diagnostic measurements, information condensation, and damage identification. The developments in each of these four aspects of structural health monitoring have been exercised on a broad range of experimental data. This experimental data has been extracted from structures from several application areas which include aging aircraft, wind energy, aging bridges, offshore structures, structural supports, and mechanical parts. As a result of these advances, Sandia National Laboratories is in a position to perform further advanced development, operational implementation, and technical consulting for a broad class of the nation`s aging infrastructure problems.

James, G.H. III [Sandia National Labs., Albuquerque, NM (United States). Experimental Structural Dynamics Dept.

1996-03-01T23:59:59.000Z

433

Evaluation of energy system analysis techniques for identifying underground facilities  

SciTech Connect (OSTI)

This report describes the results of a study to determine the feasibility and potential usefulness of applying energy system analysis techniques to help detect and characterize underground facilities that could be used for clandestine activities. Four off-the-shelf energy system modeling tools were considered: (1) ENPEP (Energy and Power Evaluation Program) - a total energy system supply/demand model, (2) ICARUS (Investigation of Costs and Reliability in Utility Systems) - an electric utility system dispatching (or production cost and reliability) model, (3) SMN (Spot Market Network) - an aggregate electric power transmission network model, and (4) PECO/LF (Philadelphia Electric Company/Load Flow) - a detailed electricity load flow model. For the purposes of most of this work, underground facilities were assumed to consume about 500 kW to 3 MW of electricity. For some of the work, facilities as large as 10-20 MW were considered. The analysis of each model was conducted in three stages: data evaluation, base-case analysis, and comparative case analysis. For ENPEP and ICARUS, open source data from Pakistan were used for the evaluations. For SMN and PECO/LF, the country data were not readily available, so data for the state of Arizona were used to test the general concept.

VanKuiken, J.C.; Kavicky, J.A.; Portante, E.C. [and others

1996-03-01T23:59:59.000Z

434

Energy Reductions Using Next-Generation Remanufacturing Techniques  

SciTech Connect (OSTI)

The goal of this project was to develop a radically new surface coating approach that greatly enhances the performance of thermal spray coatings. Rather than relying on a roughened grit blasted substrate surface for developing a mechanical bond between the coating and substrate, which is the normal practice with conventional thermal spraying, a hybrid approach of combining a focused laser beam to thermally treat the substrate surface in the vicinity of the rapidly approaching thermally-sprayed powder particles was developed. This new surface coating process is targeted primarily at enabling remanufacturing of components used in engines, drive trains and undercarriage systems; thereby providing a substantial global opportunity for increasing the magnitude and breadth of parts that are remanufactured through their life cycle, as opposed to simply being replaced by new components. The projected benefits of a new remanufacturing process that increases the quantity of components that are salvaged and reused compared to being fabricated from raw materials will clearly vary based on the specific industry and range of candidate components that are considered. At the outset of this project two different metal processing routes were considered, castings and forgings, and the prototypical components for each process were liners and crankshafts, respectively. The quantities of parts used in the analysis are based on our internal production of approximately 158,000 diesel engines in 2007. This leads to roughly 1,000,000 liners (assuming a mixture of 6- and 8-cylinder engines) and 158,000 crankshafts. Using energy intensity factors for casting and forgings, respectively, of 4450 and 5970 Btu-hr/lb along with the energy-induced CO2 generation factor of 0.00038 lbs CO2/Btu, energy savings of over 17 trillion BTUs and CO2 reductions of over 6.5 million lbs could potentially be realized by remanufacturing the above mentioned quantities of crankshafts and liners. This project supported the Industrial Technologies Program's initiative titled 'Industrial Energy Efficiency Grand Challenge.' To contribute to this Grand Challenge, we. pursued an innovative processing approach for the next generation of thermal spray coatings to capture substantial energy savings and green house gas emission reductions through the remanufacturing of steel and aluminum-based components. The primary goal was to develop a new thermal spray coating process that yields significantly enhanced bond strength. To reach the goal of higher coating bond strength, a laser was coupled with a traditional twin-wire arc (TWA) spray gun to treat the component surface (i.e., heat or partially melt) during deposition. Both ferrous and aluminum-based substrates and coating alloys were examined to determine what materials are more suitable for the laser-assisted twin-wire arc coating technique. Coating adhesion was measured by static tensile and dynamic fatigue techniques, and the results helped to guide the identification of appropriate remanufacturing opportunities that will now be viable due to the increased bond strength of the laser-assisted twin-wire arc coatings. The feasibility of the laser-assisted TWA (LATWA) process was successfully demonstrated in this current effort. Critical processing parameters were identified, and when these were properly controlled, a strong, diffusion bond was developed between the substrate and the deposited coating. Consequently, bond strengths were nearly doubled over those typically obtained using conventional grit-blast TWA coatings. Note, however, that successful LATWA processing was limited to ferrous substrates coated with steel coatings (e.g., 1020 and 1080 steel). With Al-based substrates, it was not possible to avoid melting a thin layer of the substrate during spraying, and this layer re-solidified to form a band of intermetallic phases at the substrate/coating interface, which significantly diminished the coating adhesion. The capability to significantly increase the bond strength with ferrous substrates and coatings may open new reman

Sordelet, Daniel; Racek, Ondrej

2012-02-24T23:59:59.000Z

435

Weldability and joining techniques for advanced fossil energy system alloys  

SciTech Connect (OSTI)

The efforts represent the concerns for the basic understanding of the weldability and fabricability of the advanced high temperature alloys so necessary to affect increases in the efficiency of the next generation Fossil Energy Power Plants. The effort was divided into three tasks with the first effort dealing with the welding and fabrication behavior of 310HCbN (HR3C), the second task details the studies aimed at understanding the weldability of a newly developed 310TaN high temperature stainless (a modification of 310 stainless) and Task 3 addressed the cladding of austenitic tubing with Iron-Aluminide using the GTAW process. Task 1 consisted of microstructural studies on 310HCbN and the development of a Tube Weldability test which has applications to production welding techniques as well as laboratory weldability assessments. In addition, the evaluation of ex-service 310HCbN which showed fireside erosion and cracking at the attachment weld locations was conducted. Task 2 addressed the behavior of the newly developed 310 TaN modification of standard 310 stainless steel and showed that the weldability was excellent and that the sensitization potential was minimal for normal welding and fabrication conditions. The microstructural evolution during elevated temperature testing was characterized and the second phase particles evolved upon aging were identified. Task 3 details the investigation undertaken to clad 310HCbN tubing with Iron Aluminide and developed welding conditions necessary to provide a crack free cladding. The work showed that both a preheat and a post-heat was necessary for crack free deposits and the effect of a third element on the cracking potential was defined together with the effect of the aluminum level for optimum weldability.

Lundin, C.D.; Qiao, C.Y.P.; Liu, W.; Yang, D.; Zhou, G.; Morrison, M. [Univ. of Tennessee, Knoxville, TN (United States)

1998-05-01T23:59:59.000Z

436

4? Non-Coplanar Liver SBRT: A Novel Delivery Technique  

SciTech Connect (OSTI)

Purpose: To improve the quality of liver stereotactic body radiation therapy (SBRT) treatments, a novel 4? framework was developed with accompanying algorithms to optimize non-coplanar beam orientations and fluences. The dose optimization is performed on a patient-specific deliverable beam geometry solution space, parameterized with patient and linear accelerator gantry orientations. Methods and Materials: Beams causing collision between the gantry and the couch or patient were eliminated by simulating all beam orientations using a precise computer assisted design model of the linear accelerator and a human subject. Integrated beam orientation and fluence map optimizations were performed on remaining beams using a greedy column generation method. Testing of the new method was performed on 10 liver SBRT cases previously treated with 50 to 60 Gy in 5 fractions using volumetric modulated arc therapy (VMAT). For each patient, both 14 and 22 non-coplanar fields were selected and optimized to meet the objective of ?95% of the planning target volume (PTV) covered by 100% of the prescription dose. Doses to organs at risk, normal liver volumes receiving <15 Gy, integral dose, and 50% dose spillage volumes were compared against the delivered clinical VMAT plans. Results: Compared with the VMAT plans, the 4? plans yielded reduced 50% dose spillage volume and integral dose by 22% (range 10%-40%) and 19% (range 13%-26%), respectively. The mean normal liver volume receiving <15 Gy was increased by 51 cc (range 21-107 cc) with a 31% reduction of the mean normal liver dose. Mean doses to the left kidney and right kidney and maximum doses to the stomach and spinal cord were on average reduced by 70%, 51%, 67%, and 64% (P?.05). Conclusions: This novel 4? non-coplanar radiation delivery technique significantly improved dose gradient, reduced high dose spillage, and improved organ at risk sparing compared with state of the art VMAT plans.

Dong, Peng; Lee, Percy; Ruan, Dan [Department of Radiation Oncology, University of California, Los Angeles, California (United States)] [Department of Radiation Oncology, University of California, Los Angeles, California (United States); Long, Troy; Romeijn, Edwin [Department of Industrial and Operations Engineering, University of Michigan, Ann Arbor, Michigan (United States)] [Department of Industrial and Operations Engineering, University of Michigan, Ann Arbor, Michigan (United States); Yang, Yingli; Low, Daniel; Kupelian, Patrick [Department of Radiation Oncology, University of California, Los Angeles, California (United States)] [Department of Radiation Oncology, University of California, Los Angeles, California (United States); Sheng, Ke, E-mail: ksheng@mednet.ucla.edu [Department of Radiation Oncology, University of California, Los Angeles, California (United States)] [Department of Radiation Oncology, University of California, Los Angeles, California (United States)

2013-04-01T23:59:59.000Z

437

Improved mesh based photon sampling techniques for neutron activation analysis  

SciTech Connect (OSTI)

The design of fusion power systems requires analysis of neutron activation of large, complex volumes, and the resulting particles emitted from these volumes. Structured mesh-based discretization of these problems allows for improved modeling in these activation analysis problems. Finer discretization of these problems results in large computational costs, which drives the investigation of more efficient methods. Within an ad hoc subroutine of the Monte Carlo transport code MCNP, we implement sampling of voxels and photon energies for volumetric sources using the alias method. The alias method enables efficient sampling of a discrete probability distribution, and operates in 0(1) time, whereas the simpler direct discrete method requires 0(log(n)) time. By using the alias method, voxel sampling becomes a viable alternative to sampling space with the 0(1) approach of uniformly sampling the problem volume. Additionally, with voxel sampling it is straightforward to introduce biasing of volumetric sources, and we implement this biasing of voxels as an additional variance reduction technique that can be applied. We verify our implementation and compare the alias method, with and without biasing, to direct discrete sampling of voxels, and to uniform sampling. We study the behavior of source biasing in a second set of tests and find trends between improvements and source shape, material, and material density. Overall, however, the magnitude of improvements from source biasing appears to be limited. Future work will benefit from the implementation of efficient voxel sampling - particularly with conformal unstructured meshes where the uniform sampling approach cannot be applied. (authors)

Relson, E.; Wilson, P. P. H.; Biondo, E. D. [University of Wisconsin-Madison, 1500 Engineering Drive, Madison, WI 53706 (United States)

2013-07-01T23:59:59.000Z

438

Industrial mixing techniques for Hanford double-shell tanks  

SciTech Connect (OSTI)

Jet mixer pumps are currently the baseline technology for sludge mobilization and mixing in one-million gallon double-shell tanks at the Hanford and Savannah River Sites. Improvements to the baseline jet mixer pump technology are sought because jet mixer pumps have moving parts that may fail or require maintenance. Moreover, jet mixers are relatively expensive, they heat the waste, and, in some cases, may not mobilize enough of the sludge. This report documents a thorough literature search for commercially available applicable mixing technologies that could be used for double-shell tank sludge mobilization and mixing. Textbooks, research articles, conference proceedings, mixing experts, and the Thomas Register were consulted to identify applicable technologies. While there are many commercial methods that could be used to mobilize sludge or mix the contents of a one-million gallon tank, few will work given the geometrical constraints (e.g., the mixer must fit through a 1.07-m-diameter riser) or the tank waste properties (e.g., the sludge has such a high yield stress that it generally does not flow under its own weight). Pulsed fluid jets and submersible Flygt mixers have already been identified at Hanford and Savannah River Sites for double-shell tank mixing applications. While these mixing technologies may not be applicable for double-shell tanks that have a thick sludge layer at the bottom (since too many of these mixers would need to be installed to mobilize most of the sludge), they may have applications in tanks that do not have a settled solids layer. Retrieval projects at Hanford and other U.S. Department of Energy sites are currently evaluating the effectiveness of these mixing techniques for tank waste applications. The literature search did not reveal any previously unknown technologies that should be considered for sludge mobilization and mixing in one-million gallon double-shell tanks.

Daymo, E.A.

1997-09-01T23:59:59.000Z

439

Techniques for evaluation of e-beam evaporative processes  

SciTech Connect (OSTI)

Efforts to evaluate and characterize electron beam evaporative processes at LLNL have produced a number of techniques and capabilities which have proven useful in advancing the process understanding. One of these diagnostic tools, high dynamic range video imaging of the molten pool surface, has provided insight regarding process responses at the melt pool liquid-vapor interface. A water cooled video camera provides continuous high resolution imaging of the pool surface from a low angle position within 20 cm of the liquid-vapor interface. From this vantage point, the e-beam footprint is clearly defined and melt pool free surface shape can be observed. Effects of changes in e-beam footprint, power distribution and sweep frequency on pool surface shape and stability of vaporization are immediately shown. Other electron beam melting and vaporization events have been observed and recorded. These include: formation of the pool and dissipation of {open_quotes}rafts{close_quotes} on the pool surface during startup, behavior of feed material as it enters the pool, effects of feed configuration changes on the mixing of feed entering the pool volume and behaviors of co-evaporated materials of different vapor pressures at the feed/pool boundary. When used in conjunction with laser vapor monitoring capabilities (presented at the 1994 Electron Beam Melting and Refining Conference, Reno, NV), correlation between pool surface phenomena and vaporizer performance has been identified. This video capability was used in verifying the titanium evaporation model results presented at this conference by confirming the calculated melt pool surface deformations caused by vapor pressure of the departing evaporant at the liquid-vapor interface.

Meier, T.C.; Nelson, C.M. [Lawrence Livermore National Lab., CA (United States)

1996-12-31T23:59:59.000Z

440

Subhourly wind forecasting techniques for wind turbine operations  

SciTech Connect (OSTI)

Three models for making automated forecasts of subhourly wind and wind power fluctuations were examined to determine the models' appropriateness, accuracy, and reliability in wind forecasting for wind turbine operation. Such automated forecasts appear to have value not only in wind turbine control and operating strategies, but also in improving individual wind turbine control and operating strategies, but also in improving individual wind turbine operating strategies (such as determining when to attempt startup). A simple persistence model, an autoregressive model, and a generalized equivalent Markhov (GEM) model were developed and tested using spring season data from the WKY television tower located near Oklahoma City, Oklahoma. The three models represent a pure measurement approach, a pure statistical method and a statistical-dynamical model, respectively. Forecasting models of wind speed means and measures of deviations about the mean were developed and tested for all three forecasting techniques for the 45-meter level and for the 10-, 30- and 60-minute time intervals. The results of this exploratory study indicate that a persistence-based approach, using onsite measurements, will probably be superior in the 10-minute time frame. The GEM model appears to have the most potential in 30-minute and longer time frames, particularly when forecasting wind speed fluctuations. However, several improvements to the GEM model are suggested. In comparison to the other models, the autoregressive model performed poorly at all time frames; but, it is recommended that this model be upgraded to an autoregressive moving average (ARMA or ARIMA) model. The primary constraint in adapting the forecasting models to the production of wind turbine cluster power output forecasts is the lack of either actual data, or suitable models, for simulating wind turbine cluster performance.

Wegley, H.L.; Kosorok, M.R.; Formica, W.J.

1984-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Techniques to Access Databases and Integrate Data for Hydrologic Modeling  

SciTech Connect (OSTI)

This document addresses techniques to access and integrate data for defining site-specific conditions and behaviors associated with ground-water and surface-water radionuclide transport applicable to U.S. Nuclear Regulatory Commission reviews. Environmental models typically require input data from multiple internal and external sources that may include, but are not limited to, stream and rainfall gage data, meteorological data, hydrogeological data, habitat data, and biological data. These data may be retrieved from a variety of organizations (e.g., federal, state, and regional) and source types (e.g., HTTP, FTP, and databases). Available data sources relevant to hydrologic analyses for reactor licensing are identified and reviewed. The data sources described can be useful to define model inputs and parameters, including site features (e.g., watershed boundaries, stream locations, reservoirs, site topography), site properties (e.g., surface conditions, subsurface hydraulic properties, water quality), and site boundary conditions, input forcings, and extreme events (e.g., stream discharge, lake levels, precipitation, recharge, flood and drought characteristics). Available software tools for accessing established databases, retrieving the data, and integrating it with models were identified and reviewed. The emphasis in this review was on existing software products with minimal required modifications to enable their use with the FRAMES modeling framework. The ability of four of these tools to access and retrieve the identified data sources was reviewed. These four software tools were the Hydrologic Data Acquisition and Processing System (HDAPS), Integrated Water Resources Modeling System (IWRMS) External Data Harvester, Data for Environmental Modeling Environmental Data Download Tool (D4EM EDDT), and the FRAMES Internet Database Tools. The IWRMS External Data Harvester and the D4EM EDDT were identified as the most promising tools based on their ability to access and retrieve the required data, and their ability to integrate the data into environmental models using the FRAMES environment.

Whelan, Gene; Tenney, Nathan D.; Pelton, Mitchell A.; Coleman, Andre M.; Ward, Duane L.; Droppo, James G.; Meyer, Philip D.; Dorow, Kevin E.; Taira, Randal Y.

2009-06-17T23:59:59.000Z

442

argentina audio magnetotelluric: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

argentina audio magnetotelluric First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Inversion of...

443

Calculation of nuclear masses using image reconstruction techniques  

SciTech Connect (OSTI)

Several methods have been developed to calculate and predict nuclear masses over the last 70 years. The accuracy of the present state-of-the-art nuclear mass models is impressive, because these quantities can be calculated with an average 0.05 % precision. However this precision level is still insufficient to deal with nuclear reactions of astrophysical interest, especially r-process ones. Different approaches exist to calculate nuclear masses, ranging from the simple Bethe-Weizsaecker Liquid Drop Formula (LDM) to the sophisticated Finite Range Droplet Model calculations or the microscopic Hartree-Fock-Bogoliuvob techniques from first principles, using Skyrme or Gogny parametrizations of the nucleon-nucleon interaction. Here we suggest a new method to calculate this fundamental property of the atomic nucleus, using a completely phenomenological point of view. Our method is based in the analysis of the differences between measured masses and LDM predictions, which contains information related to those ingredients not taken into account in the LDM formula, such as shell closures, nuclear deformations and residual nuclear interactions. The differences are arranged in a two dimensional plot which can be viewed as an incomplete image of the full chart of nuclides, equivalent to a product of the full image and a binary mask. In order to remove the distortions produced by this mask we employ an algorithm, well known in astronomy, used to remove artificial effects present in the astrophysical images collected through telescopes. This algorithm is called the CLEAN method. It is one of a number of methods which exists to deconvolve undesirable effects in images and to extrapolate or reconstruct missing parts in them. By using the CLEAN method we can fit measured masses with an r.m.s error of less than 100 keV. We have performed several checks and concluded that its utilization must be carried out carefully in order to obtain reliable results in the zone of unknown masses between the driplines. We also outline potential applications of the present approach.

Barea, J.; Frank, A.; Hirsch, J. G.; Lopez, J. C.; Morales, I.; Mendoza, J. [Instituto de Ciencias Nucleares, Universidad Nacional Autonoma de Mexico, Apartado Postal 70-543, 04510 Mexico, D.F. (Mexico); Velazquez, V. [Facultad de Ciencias, Universidad Nacional Autonoma de Mexico, 04510 Mexico, D.F. (Mexico)

2007-10-26T23:59:59.000Z

444

Waste minimization in analytical chemistry through innovative sample preparation techniques.  

SciTech Connect (OSTI)

Because toxic solvents and other hazardous materials are commonly used in analytical methods, characterization procedures result in significant and costly amount of waste. We are developing alternative analytical methods in the radiological and organic areas to reduce the volume or form of the hazardous waste produced during sample analysis. For the radiological area, we have examined high-pressure, closed-vessel microwave digestion as a way to minimize waste from sample preparation operations. Heated solutions of strong mineral acids can be avoided for sample digestion by using the microwave approach. Because reactivity increases with pressure, we examined the use of less hazardous solvents to leach selected contaminants from soil for subsequent analysis. We demonstrated the feasibility of this approach by extracting plutonium from a NET reference material using citric and tartaric acids with microwave digestion. Analytical results were comparable to traditional digestion methods, while hazardous waste was reduced by a factor often. We also evaluated the suitability of other natural acids, determined the extraction performance on a wider variety of soil types, and examined the extraction efficiency of other contaminants. For the organic area, we examined ways to minimize the wastes associated with the determination of polychlorinated biphenyls (PCBs) in environmental samples. Conventional methods for analyzing semivolatile organic compounds are labor intensive and require copious amounts of hazardous solvents. For soil and sediment samples, we have a method to analyze PCBs that is based on microscale extraction using benign solvents (e.g., water or hexane). The extraction is performed at elevated temperatures in stainless steel cells containing the sample and solvent. Gas chromatography-mass spectrometry (GC/MS) was used to quantitate the analytes in the isolated extract. More recently, we developed a method utilizing solid-phase microextraction (SPME) for natural water samples. In this SPME technique, a fused-silica fiber coated with a polymeric film is exposed to the sample, extraction is allowed to take place, and then the analytes are thermally desorbed for GC analysis. Unlike liquid-liquid extraction or solid-phase extraction, SPME consumes all of the extracted sample in the analysis, significantly reducing the required sample volume.

Smith, L. L.

1998-05-28T23:59:59.000Z

445

The Use of Electrochemical Techniques to Characterize Wet Steam Environments  

SciTech Connect (OSTI)

The composition of a steam phase in equilibrium with a water phase at high temperature is remarkably affected by the varying capabilities of the water phase constituents to partition into the steam. Ionic impurities (sodium, chloride, sulfate, etc.) tend to remain in the water phase, while weakly ionic or gaseous species (oxygen) partition into the steam. Analysis of the water phase can provide misleading results concerning the steam phase composition or environment. This paper describes efforts that were made to use novel electrochemical probes and sampling techniques to directly characterize a wet steam phase environment in equilibrium with high temperature water. Probes were designed to make electrochemical measurements in the thin film of water existing on exposed surfaces in steam over a water phase. Some of these probes were referenced against a conventional high temperature electrode located in the water phase. Others used two different materials (typically tungsten and platinum) to make measurements without a true reference electrode. The novel probes were also deployed in a steam space removed from the water phase. It was necessary to construct a reservoir and an external, air-cooled condenser to automatically keep the reservoir full of condensed steam. Conventional reference and working electrodes were placed in the water phase of the reservoir and the novel probes protruded into the vapor space above it. Finally, water phase probes (both reference and working electrodes) were added to the hot condensed steam in the external condenser. Since the condensing action collapsed the volatiles back into the water phase, these electrodes proved to be extremely sensitive at detecting oxygen, which is one of the species of highest concern in high temperature power systems. Although the novel steam phase probes provided encouraging initial results, the tendency for tungsten to completely corrode away in the steam phase limited their usefulness. However, the conventional water phase electrodes, installed both in the reservoir and in the external condensing coil, provided useful data showing the adverse impact of oxygen and carbon dioxide on the REDOX potential and high temperature pH, respectively.

Bruce W. Bussert; John A. Crowley; Kenneth J. Kimball; Brian J. Lashway

2003-04-30T23:59:59.000Z

446

E-Print Network 3.0 - adaptive filtering techniques Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

adaptive filtering techniques Page: << < 1 2 3 4 5 > >> 1 Applications of the Fourier Transform in Imaging Highpass and Lowpass Filters Summary: in the frequency domain. We present...

447

E-Print Network 3.0 - advanced microscopy techniques Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

microscopy techniques and their practice in relationship to materials structure characterization... of Microscopy", Edited by P.W. Hawkes and J.C.H. Spence, Springer, 2006 (An...

448

How to Find More Supernovae with Less Work: Object Classification Techniques for Difference Imaging  

E-Print Network [OSTI]

How to Find More Supernovae with Less Work: Object Classi?methods: statistical supernovae: general techniques:for objects such as supernovae, active galactic nuclei,

Bailey, Stephen; Aragon, Cecilia; Romano, Raquel; Thomas, Rollin C.; Weaver, Benjamin A.; Wong, Daniel

2007-01-01T23:59:59.000Z

449

Microsoft Word - NETL-TRS-6-2014_Imaging Techniques Applied to...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

solid (low thermal maturity), pendular (intermediate thermal maturity), or spongy (high thermal maturity). Examples of these pore types are shown in Figure 12. Imaging Techniques...

450

E-Print Network 3.0 - algorithm ga technique Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for: algorithm ga technique Page: << < 1 2 3 4 5 > >> 1 GAMMA: Global Arrays Meets MATLAB Rajkiran Panuganti Summary: is a straightforward implementa- tion of a standard...

451

E-Print Network 3.0 - absolute threshold technique Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and Computing (1995) 5, 265-273 Application of wavelets to the Summary: theory. In Section 3, we discuss available techniques for thresholding the coefficients of a...

452

E-Print Network 3.0 - analysis techniques identifies Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

tool. This technique can be applied where there are changes... composition or by bulk chemical analysis. Correlation within the ... Source: Collection: Environmental...

453

E-Print Network 3.0 - adaptive matched-filter technique Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

subtraction of free surface multiples through order-by-order prediction, matching filters... ). Adaptive subtraction is a statistical technique used to compensate for these...

454

E-Print Network 3.0 - analysis techniques designed Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and Design Each successful student will Summary: Requirements Analysis Techniques Ad Hoc Approach to Design DPIM - Levels Two, Three and Four Design Methodology......

455

E-Print Network 3.0 - algebra based techniques Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

based techniques Page: << < 1 2 3 4 5 > >> 1 University of Regina Department of Mathematics and Statistics Summary: , then the homology comes equipped with an action of the...

456

E-Print Network 3.0 - acoustic interferometry technique Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

experiment Source: Collection: Geosciences 2 Acoustic Identification of Unknown Fluids Summary: Laboratory (LANL) have developed a unique sound-based technique, called Swept...

457

Citizenship Porn within the Frame: Visualizing Techniques, Cyberspace, and the Production of Undocumented  

E-Print Network [OSTI]

Citizenship Porn within the Frame: Visualizing Techniques,pornographic fantasy that I call citizenship porn. Let mewhat I mean by citizenship porn; I will then raise several

Moran, Erin

2007-01-01T23:59:59.000Z

458

Evaluation of Four Imaging Techniques for the Electrical Characterization of Solar Cells (Presentation)  

SciTech Connect (OSTI)

The imaging techniques enable the possibility of higher-level quality control and defect analysis of solar cell materials in in-line production processes.

Johnston. S.; Berman, G.; Call, N.; Ahrenkiel, R.

2008-12-03T23:59:59.000Z

459

E-Print Network 3.0 - atomic physics techniques Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Matters "The Reason and Ways to Know Things Precisely using Cold Atoms" Summary: ). Cold atoms and the newly developed technique of the optical frequency comb both play...

460

E-Print Network 3.0 - advanced computer techniques Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Chemistry) related to using computers to model the structure... , and high-performance computing resources to apply techniques discussed in class. Prerequisites:...

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

E-Print Network 3.0 - atomic absorption technique Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Search Powered by Explorit Topic List Advanced Search Sample search results for: atomic absorption technique Page: << < 1 2 3 4 5 > >> 1 Xray Absorption Near Edge...

462

E-Print Network 3.0 - absorption spectroscopy techniques Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

A partial sampling of these techniques includes: Absorption spectroscopy Atomic absorption... 109 3.4 Spectroscopic Sensors Spectroscopy is the scientific study of...

463

E-Print Network 3.0 - atomic spectrometry techniques Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

techniques that also measure concentration using atom properties... , such as atomic absorption or atomic emission spectrometry (Willard et al. 1988). Quadrupole ICP-MS...

464

Radiation exposure in X-ray-based imaging techniques used in osteoporosis  

E-Print Network [OSTI]

techniques used in osteoporosis Received: 10 December 2009vertebral fracture in osteoporosis. Osteoporos Int 5.for postmenopausal osteoporosis: a review of the evidence

Damilakis, John; Adams, Judith E.; Guglielmi, Giuseppe; Link, Thomas M.

2010-01-01T23:59:59.000Z

465

advanced x-ray techniques: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

a new X-ray radiographic technique for measuring density uniformity of silica aerogels used as radiator in proximity-focusing ring-imaging Cherenkov detectors. To obtain...

466

E-Print Network 3.0 - alteration technique based Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Gas-Wetting in Summary: techniques. Penny et al.12 believed that increased production was due to wettability alteration. However... ., and Sharma, M.M.: The Mechanism...

467

Review of geochemical measurement techniques for a nuclear waste repository in bedded salt  

SciTech Connect (OSTI)

A broad, general review is presented of geochemical measurement techniques that can provide data necessary for site selection and repository effectiveness assessment for a radioactive waste repository in bedded salt. The available measurement techniques are organized according to the parameter measured. The list of geochemical parameters include all those measurable geochemical properties of a sample whole values determine the geochemical characteristics or behavior of the system. For each technique, remarks are made pertaining to the operating principles of the measurement instrument and the purpose for which the technique is used. Attention is drawn to areas where further research and development are needed.

Knauss, K.G.; Steinborn, T.L.

1980-05-22T23:59:59.000Z

468

E-Print Network 3.0 - advanced spectroscopic techniques Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

spectroscopic and chemical mapping techniques allow one to speciate metal contaminants in soils... 1303 The Role of Molecular Scale Investigations in Advanci,ng the Frontiers of...

469

E-Print Network 3.0 - asset management techniques Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

CONSIDERATION DEPENDENCIES AMONG ASSETS Summary: . There is no transaction cost for trading assets. 3 Existing Techniques Numerous models have been developed using variety... in...

470

E-Print Network 3.0 - axial translation technique Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Engineering 38 Wireless Control of Magnetic Helical Microrobots using a Rotating-Permanent-Magnet Manipulator Summary: to a helical microrobot. Using this technique, there are...

471

E-Print Network 3.0 - anchor repair techniques Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

are many other practices and techniques that may be more effective and appropriate for stream restoration... . In the following sections, the use of in-stream structures and...

472

Webinar: Testing Oxygen Reduction Reaction Activity with the Rotating Disc Electrode Technique  

Broader source: Energy.gov [DOE]

Video recording of the Fuel Cell Technologies Office webinar, Testing Oxygen Reduction Reaction Activity with the Rotating Disc Electrode Technique, originally presented on March 12, 2013.

473

Technique for Real-Time Measurements of Endothelial Permeability in a Microfluidic  

E-Print Network [OSTI]

Technique for Real-Time Measurements of Endothelial Permeability in a Microfluidic Membrane Chip microfluidic platform to measure real-time perme- ability of endothelial cell monolayers on porous mem- branes of cell-free and cell-bound mem- brane layers. This technique is a highly sensitive, novel microfluidic

Simmons, Craig A.

474

Breast radiotherapy in the lateral decubitus position: A technique to prevent lung and heart irradiation  

SciTech Connect (OSTI)

Purpose: To present an original technique for breast radiotherapy, with the aim of limiting lung and heart irradiation, satisfying quality assurance criteria. Methods and Material: An original radiotherapy technique for breast irradiation has been developed at the Institute Curie in January 1996. It consists of isocentric breast irradiation in the lateral decubitus position (isocentric lateral decubitus [ILD]). This technique is indicated for voluminous or pendulous breasts needing breast irradiation only. Thin carbon fiber supports and special patient positioning devices have been developed especially for this technique. In vivo measurements were performed to check the dose distribution before the routine use of the technique. Results: ILD has been successfully implemented in routine practice, and 500 patients have been already treated. Breast radiotherapy is performed using a dose of 50 Gy at ICRU point in 25 fractions. ILD shows good homogeneity of the dose in breast treatment volume, treatment fields are perpendicular to the skin ensuring its protection, and extremely low dose is delivered to the underlying lung and heart. Conclusion: In cases of voluminous breasts or patients with a history of lung and heart disease, our technique provides several advantages over the conventional technique with opposing tangential fields. This technique improves the dose homogeneity according to the ICRU recommendations.

Campana, Francois [Department of Radiation Oncology, Institute Curie, Paris (France)]. E-mail: francois.campana@curie.net; Kirova, Youlia M. [Department of Radiation Oncology, Institute Curie, Paris (France); Rosenwald, Jean-Claude [Department of Radiation Oncology, Institute Curie, Paris (France); Dendale, Remi [Department of Radiation Oncology, Institute Curie, Paris (France); Vilcoq, Jacques R. [Department of Radiation Oncology, Institute Curie, Paris (France); Dreyfus, Helene [Department of Radiation Oncology, Institute Curie, Paris (France); Fourquet, Alain [Department of Radiation Oncology, Institute Curie, Paris (France)

2005-04-01T23:59:59.000Z

475

The vertical voltage termination technique characterizations of single die multiple 600V power  

E-Print Network [OSTI]

The vertical voltage termination technique characterizations of single die multiple 600V power.grenoble-inp.fr Abstract-- Deep trench terminations are commonly known as a technique to achieve ideal breakdown voltages for high voltage devices. This paper presents the use of deep trench terminations as an original concept

Paris-Sud XI, Universit de

476

Polymer electrolyte fuel cell electrodes grown by vapor deposition techniques Pascal Brault*  

E-Print Network [OSTI]

Polymer electrolyte fuel cell electrodes grown by vapor deposition techniques Pascal Brault Abstract: Polymer fuel cell electrode growth using vapor deposition techniques is reviewed. The supports process: sputtering, CVD, PECVD, MOCVD. In each case, up-to-date fuel cell performances are highlighted

Paris-Sud XI, Universit de

477

Algorithms for Green Buildings: Learning-Based Techniques for Energy Prediction and Fault Diagnosis  

E-Print Network [OSTI]

Algorithms for Green Buildings: Learning-Based Techniques for Energy Prediction and Fault Diagnosis on servers or to redistribute to lists, requires prior specific permission. #12;Algorithms for Green Buildings: Learning-Based Techniques for Energy Prediction and Fault Diagnosis Daniel Holcomb Wenchao Li

Seshia, Sanjit A.

478

Outline Inverted File Building Compression for Inverted Files Building and Compression Techniques for Inverted  

E-Print Network [OSTI]

Outline Inverted File Building Compression for Inverted Files Building and Compression Techniques for Inverted Files Roi Blanco Dpt. Computing Science, University of A Coruna December 13, 2005 Roi Blanco Building and Compression Techniques for Inverted Files #12;Outline Inverted File Building Compression

Barreiro, Alvaro

479

Overlapping double etch technique for evaluation of metallic alloys to stress corrosion cracking  

DOE Patents [OSTI]

A double overlapping etch zone technique for evaluation of the resistance of metallic alloys to stress corrosion cracking. The technique involves evaluating the metallic alloy along the line of demarcation between an overlapping double etch zone and single etch zone formed on the metallic alloy surface.

Steeves, Arthur F. (Schenectady, NY); Stewart, James C. (Loudonville, NY)

1981-01-01T23:59:59.000Z

480

Survey of Energy Efficient Tracking and Localization Techniques in Buildings Using  

E-Print Network [OSTI]

Survey of Energy Efficient Tracking and Localization Techniques in Buildings Using Optical an overview of energy efficient localization and tracking techniques that can be applied in buildings when's homes and buildings are responsible for 41% of the energy consumption in the European Union

Wieringa, Roel

Note: This page contains sample records for the topic "techniques magnetotelluric techniques" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

SPATIAL-TEMPORAL TECHNIQUES FOR PREDICTION AND COMPRESSION OF SOIL FERTILITY DATA  

E-Print Network [OSTI]

SPATIAL-TEMPORAL TECHNIQUES FOR PREDICTION AND COMPRESSION OF SOIL FERTILITY DATA D. Pokrajac propose several techniques for data reduction and spatial- temporal prediction in precision agriculture and applied for analysis and compression of multi-temporal precision agriculture data. The spatial

Obradovic, Zoran

482

HIGH-THROUGHPUT/COMBINATORIAL TECHNIQUES IN HYDROGEN STORAGE MATERIALS R&D WORKSHOP  

E-Print Network [OSTI]

HIGH-THROUGHPUT/COMBINATORIAL TECHNIQUES IN HYDROGEN STORAGE MATERIALS R&D WORKSHOP U.S. Department 26, 2007, DOE's Hydrogen Storage Program held a one-day High- Throughput/Combinatorial Techniques in Hydrogen Storage Materials R&D meeting to identify how to better implement high

483

A geostatistical data fusion technique for merging remote sensing and groundbased observations of aerosol optical thickness  

E-Print Network [OSTI]

A geostatistical data fusion technique for merging remote sensing and groundbased observations. Braverman, and C. E. Miller (2010), A geostatistical data fusion technique for merging remote sensing cloud properties (the aerosol indirect effect), producing a net cooling of the Earth surface, and can

Michalak, Anna M.

484

MODLE DE GESTION TECHNIQUE ET CONOMIQUE D'UN ATELIER DE PRODUCTION  

E-Print Network [OSTI]

ECONOMIE ECONOMICS MODLE DE GESTION TECHNIQUE ET CONOMIQUE D'UN ATELIER DE PRODUCTION PORCINE D and training of specialized workers. MODLE DE GESTION TECHNIQUE ET CONOMIQUE D'UN ATELIER DE PRODUCTION PORCINE : CAS D'UN ATELIER NAISSEUR-ENGRAISSEUR A. AUMAITRE, C. FVRIER J.-M. ATTONATY Station de

Boyer, Edmond

485

Safety First Safety Last Safety Always Over the years, many techniques and methods have been  

E-Print Network [OSTI]

Safety First Safety Last Safety Always Over the years, many techniques and methods have been, especially to the lower back. DON'T TWIST! Safe Lifting Techniques Safety Tip #6 Don't learn safety of this safety tip sheet. Please refrain from reading the information verbatim--paraphrase it instead

Minnesota, University of

486

A Technique for Energy Versus Quality of Service Trade-off for MPEG-2 Decoder  

E-Print Network [OSTI]

A Technique for Energy Versus Quality of Service Trade-off for MPEG-2 Decoder Krishnan Srinivasan computation in turn can be traded-off for energy reduction by exploiting dy- namic power management (DPM. The paper presents technique for energy versus qual- ity trade-off by selective processing of macroblocks

Chatha, Karam S.

487

Instruments and Methods New technique for access-borehole drilling in shelf glaciers using  

E-Print Network [OSTI]

Instruments and Methods New technique for access-borehole drilling in shelf glaciers using lightweight drills V. ZAGORODNOV,1 S. TYLER,2 D. HOLLAND,3 A. STERN,3 L.G. THOMPSON,1 C. SLADEK,2 S. KOBS,2 J. This paper describes a new, environmentally friendly drilling technique for making short- and long

Howat, Ian M.

488

Technical Note Field Test of Digital Photography Biomass Estimation Technique in Tallgrass Prairie  

E-Print Network [OSTI]

Technical Note Field Test of Digital Photography Biomass Estimation Technique in Tallgrass Prairie unmeasured because of the time required to clip plots and process samples, as well as limited access or proximity to a drying oven. We tested the digital photography biomass estimation technique for measuring

Morrison, Lloyd W.

489

c Copyright by David Daly, 2001 ANALYSIS OF CONNECTION AS A DECOMPOSITION TECHNIQUE  

E-Print Network [OSTI]

c Copyright by David Daly, 2001 #12;ANALYSIS OF CONNECTION AS A DECOMPOSITION TECHNIQUE BY DAVID of the decomposition techniques introducing an error of less than 11%. iii #12;To my father, who will never see William H. Sanders, for technical advice and support on the Mobius project. Jenny Applequist

Illinois at Urbana-Champaign, University of

490

Comparison of Wavelet and FFT Based Single Channel Speech Signal Noise Reduction Techniques  

E-Print Network [OSTI]

.Balan, Justinian.Rosca}@scr.siemens.com ABSTRACT This paper compares wavelet and short time Fourier transform based Ningping Fan, Radu Balan, Justinian Rosca Siemens Corporate Research Inc. {Ningping.Fan, Radu techniques for single channel speech signal noise reduction based on different transformation techniques

Maryland at College Park, University of

491

Begining of fish defrosting by using non-destructive ultrasonic technique  

E-Print Network [OSTI]

Begining of fish defrosting by using non-destructive ultrasonic technique M. Malaininea , B. Faiza on the monitoring and the study of fish defrosting by an ultrasonic technique, we have difficulties in detecting the begining of the thawing which is an important criterion of fish quality control. To address this problem

Paris-Sud XI, Université de

492

The Quasi-Distributed Gap Technique for Planar Inductors-Design Guidelines  

E-Print Network [OSTI]

The Quasi-Distributed Gap Technique for Planar Inductors-Design Guidelines Jiankun Hu C. R The Quasi-Distributed Gap Technique for Planar Inductors: Design Guidelines Jiankun Hu Charles R. Sullivan of low-permeability magnetic material to form a uniformly distributed gap can facilitate the design

493

Self-Assembly Techniques for Massively Parallel Packaging of MEMS Devices  

E-Print Network [OSTI]

Self-Assembly Techniques for Massively Parallel Packaging of MEMS Devices Jiandong Fang-1346, or to the author. Signature Date July 31, 2006 #12;#12;University of Washington Abstract Self-Assembly Techniques. B¨ohringer Electrical Engineering This dissertation investigates applications of self-assembly

494

Comparison of Numerical Techniques Used for Simulating Variable-Density Flow and Transport Experiments  

E-Print Network [OSTI]

Comparison of Numerical Techniques Used for Simulating Variable-Density Flow and Transport code by simulating two new variable-density-flow and transport experimental data sets. The experiments transport of a sinking groundwater plume and a rising groundwater plume. The numerical techniques used

Clement, Prabhakar

495

Directeur : P. Drossart Directeurs Adjoints : S. Chaintreuil Y. Clenet -Directeur Technique : Y. Hello -Administratrice : C. Colon  

E-Print Network [OSTI]

Technique : Y. Hello - Administratrice : C. Colon 01 janvier 2014 Page 1 / 2 SIGAL 1 scientifique 1 IR / 2 /IR D. Dias /IR P. Fedou /IR Y. Hello /IR B. Leruyet /IR P-L. Astier /IE A.C. Guériau /IE D. Perret Directeur : P. Drossart Directeurs Adjoints : S. Chaintreuil ­ Y. Clenet - Directeur Technique : Y. Hello

Demoulin, Pascal

496

ANALYSIS OF EMERGING NDE TECHNIQUES: METHODS FOR EVALUATING AND IMPLEMENTING CONTINUOUS ONLINE MONITORING  

SciTech Connect (OSTI)

One of the goals of the program for the proactive management of materials degradation (PMMD) is to manage proactively the in-service degradation of metallic components in aging NPPs. As some forms of degradation, such as stress corrosion cracking, are characterized by a long initiation time followed by a rapid growth phase, new inspection or monitoring technologies may be required. New nondestructive evaluation (NDE) techniques that may be needed include techniques to find stress corrosion cracking (SCC) precursors, on-line monitoring techniques to detect cracks as they initiate and grow, as well as advances in NDE technologies. This paper reports on the first part of the development of a methodology to determine the effectiveness of these emerging NDE techniques for managing metallic degradation. This methodology will draw from experience derived from evaluating techniques that have "emerged" in the past. The methodology will follow five stages: a definition of inspection parameters, a technical evaluation, laboratory testing, round robin testing, and the design of a performance demonstration program. This methodology will formalize the path taken for previous techniques and set a predictable course for future NDE techniques. This paper then applies the expert review section of the methodology to the acoustic emission technique to evaluate the use of acoustic emission in performing continuous online monitoring of reactor components.

Cumblidge, Stephen E.; Doctor, Steven R.; Bond, Leonard J.; Taylor, Theodore T.; Lupold, Timothy R.; Hull, Amy; Malik, Shah

2009-08-05T23:59:59.000Z

497

A (SEMI)-BLIND EQUALIZATION TECHNIQUE FOR WIRELESS BURST TRANSMISSION SYSTEMS  

E-Print Network [OSTI]

A (SEMI)-BLIND EQUALIZATION TECHNIQUE FOR WIRELESS BURST TRANSMISSION SYSTEMS Athanasios A a parametric method for estimating the unknown channel impulse response (CIR) in a blind or semi-blind manner channel output samples is correspond- ingly reduced. The proposed CIR estimation technique can be blind

Rontogiannis, Athanasios A.

498

The Mathematics of the Imaging Techniques of MEG, CT, PET and SPECT  

E-Print Network [OSTI]

The Mathematics of the Imaging Techniques of MEG, CT, PET and SPECT A.S. Fokas, V. Marinakis), of positron emission tomography (PET) and of single photon emission computed to­ mography (SPECT) are reviewed techniques of positron emission tomography (PET) and of single photon emission computed tomography (SPECT

Fokas, A. S.

499

LOD-Sprite Technique for Accelerated Terrain Rendering Baoquan Chen1  

E-Print Network [OSTI]

LOD-Sprite Technique for Accelerated Terrain Rendering Baoquan Chen1 SUNY at Stony Brook J. Edward present a new rendering technique, termed LOD-sprite render- ing, which uses a combination of a level-of-detail (LOD) represen- tation of the scene together with reusing image sprites (previously rendered images

Chen, Baoquan

500

A Review of Image-based Rendering Techniques Heung-Yeung Shum and Sing Bing Kang  

E-Print Network [OSTI]

A Review of Image-based Rendering Techniques Heung-Yeung Shum and Sing Bing Kang Microsoft Research hshum, sbkang @microsoft.com Abstract In this paper, we survey the techniques for image-based rendering. Unlike traditional 3D computer graphics in which 3D geometry of the scene is known, image-based rendering

Pang, Alex