Sample records for technical notes section

  1. Texas Phosphorus Index TECHNICAL NOTES

    E-Print Network [OSTI]

    Mukhtar, Saqib

    for West Texas, see Figure 1. NRCS and Extension Service specialists in Texas developed the P indicesTexas Phosphorus Index TECHNICAL NOTES U.S. DEPARTMENT OF AGRICULTURE NATURAL RESOURCES CONSERVATION SERVICE TEXAS Revised December, 2012 AGRONOMY TECHNICAL NOTE NUMBER ­ 15 PHOSPHORUS ASSESSMENT

  2. Technical Note 499 December1990

    E-Print Network [OSTI]

    Technical Note 499 · December1990 Interpretation as Abduction Jerry R. Hobbs, Mark Stickel;Interpretation as Abduction Jerry R. Hobbs, Mark Stickel, Douglas Appelt, and Paul Martin Artificial Intelligence Center SRI International Abstract Abduction is inference to the best explanation. In the TACITUS project

  3. Technical Note: Contrast solution density and cross section errors in inhomogeneity-corrected dose calculation for breast balloon brachytherapy

    SciTech Connect (OSTI)

    Kim, Leonard H.; Zhang Miao; Howell, Roger W.; Yue, Ning J.; Khan, Atif J. [Department of Radiation Oncology, University of Medicine and Dentistry of New Jersey: Robert Wood Johnson Medical School and Cancer Institute of New Jersey, New Brunswick, New Jersey 08903 (United States); Department of Radiology, University of Medicine and Dentistry of New Jersey: New Jersey Medical School, Newark, New Jersey 07103 (United States); Department of Radiation Oncology, University of Medicine and Dentistry of New Jersey: Robert Wood Johnson Medical School and Cancer Institute of New Jersey, New Brunswick, New Jersey 08903 (United States)

    2013-01-15T23:59:59.000Z

    Purpose: Recent recommendations by the American Association of Physicists in Medicine Task Group 186 emphasize the importance of understanding material properties and their effect on inhomogeneity-corrected dose calculation for brachytherapy. Radiographic contrast is normally injected into breast brachytherapy balloons. In this study, the authors independently estimate properties of contrast solution that were expected to be incorrectly specified in a commercial brachytherapy dose calculation algorithm. Methods: The mass density and atomic weight fractions of a clinical formulation of radiographic contrast solution were determined using manufacturers' data. The mass density was verified through measurement and compared with the density obtained by the treatment planning system's CT calibration. The atomic weight fractions were used to determine the photon interaction cross section of the contrast solution for a commercial high-dose-rate (HDR) brachytherapy source and compared with that of muscle. Results: The density of contrast solution was 10% less than that obtained from the CT calibration. The cross section of the contrast solution for the HDR source was 1.2% greater than that of muscle. Both errors could be addressed by overriding the density of the contrast solution in the treatment planning system. Conclusions: The authors estimate the error in mass density and cross section parameters used by a commercial brachytherapy dose calculation algorithm for radiographic contrast used in a clinical breast brachytherapy practice. This approach is adaptable to other clinics seeking to evaluate dose calculation errors and determine appropriate density override values if desired.

  4. DA NE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    K K DA NE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, Sept. 2, 1991 Note: G-8 RF AND RESISTIVE ENERGY LOSS IN THE INTERACTION REGION VACUUM CHAMBER S. Bartalucci, L. Palumbo, M. Serio, B-section variation leads to sub- stantial energy losses localized in the IR vacuum chamber even if the steps in cross

  5. BNL/SNS TECHNICAL NOTE R. Witkover

    E-Print Network [OSTI]

    BNL/SNS TECHNICAL NOTE NO. 049 R. Witkover September 23, 1998 ALTERNATING GRADIENT SYNCHROTRON-In-Gap" Monitor for the Spallation Neutron Source #12;SNS Technical Note Considerations in Designing a "Beam of approximately 550 nsec. With a design intensity of 1014 per pulse, un-controlled losses must be kept to a level

  6. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    K K DANE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, March 10, 1997 Note: BM-1 BUNCH current. This measurement allows to calculate energy losses due to parasitic beam-vacuum chamber losses. In this Note we present results of the measurements and their analysis, comparing the results

  7. TESLA-LNF TECHNICAL NOTE Divisione Acceleratori

    E-Print Network [OSTI]

    TESLA-LNF TECHNICAL NOTE _____________ Divisione Acceleratori Frascati, November 20, 2003 Note: TESLA Report 2003-26 TESLA DAMPING RING: INJECTION/EXTRACTION SCHEMES WITH RF DEFLECTORS D. Alesini, S/extraction schemes in the Damping Ring of TESLA using RF deflectors. We illustrate different possible solutions using

  8. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    (Chairman) F. Willeke, DESY 1. Follow up of previous Meeting The first report by the DANE Machine AdvisoryK K DANE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, May 11, 2000 Note: G-55 Report by DANE Machine Advisory Panel on 2nd Meeting held on 4-5 May 2000 J. M. Jowett, CERN S. Myers, CERN

  9. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    KKKK KKKK DANE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, January 13, 1993 Note: IR to see how much heat has to be removed. The two main sources of heat are: 1) Resistive losses due. Technol. 5(6) 3446 (1987). #12;IR-1 pg. 6 APPENDIX IA Losses in the I.R. 1) Resistive losses in Be: dp dz

  10. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    KKKK KKKK DANE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, October 26, 1994 Note: RF enough (i.e. if the parasitic losses are low with respect to the energy left by each passing bunch-zero longitudinal electric field on the cavity axis. Being azimuthally symmetric, it is possible to calculate them

  11. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    K K DANE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, July 16, 1996 Note: RF-19 losses and prevents to reach the operating voltage range. The RF cavity of the DANE -Factory Accumulator and electrical conductivities. Multipactoring (MP) is a phenomenon of resonant electron discharge which can occur

  12. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    K K DANE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, December 14, 1995 Note: CD-5, are also needed in order to minimise the losses. In order to use this device as a transverse kicker, two) excitation. #12;CD-5 pg. 3 The combined magnetic and electric field gives a net deflecting Lorentz force

  13. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    KKKK KKKK DANE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, Sept. 26, 1991 Note: RF-4 and vacuum simpler and less expensive. The cavity will be made of copper which has better electrical and thermal conductivity to reduce the RF losses and keep the cooling easier. #12;RF-4 pg. 2 Multipacting (MP

  14. Technical Note Puncture protection of PVC geomembranes______________________________________________

    E-Print Network [OSTI]

    Technical Note Puncture protection of PVC geomembranes a design procedure for estimating the puncture protection of polyvinyl chloride (PVC) geomembranes. The puncture resistance of 0.5 mm, 0.75 mm, and 1.0 mm thick PVC geomembranes was measured using the truncated

  15. Ocean Engineering 33 (2006) 22092223 Technical Note

    E-Print Network [OSTI]

    Mohseni, Kamran

    Ocean Engineering 33 (2006) 2209­2223 Technical Note Pulsatile vortex generators for low-speed maneuvering of small underwater vehicles Kamran Mohseni� Department of Aerospace Engineering Sciences, science writer). #12;1. Introduction Oceans hold the key to the origin and continuity of life on the Earth

  16. Technical Note Graphene: Substrate preparation and introduction

    E-Print Network [OSTI]

    Technical Note Graphene: Substrate preparation and introduction Radosav S. Pantelic a , Ji Won Suk September 2010 Accepted 4 October 2010 Available online xxxx Keywords: Graphene Graphene oxide Cryo the transfer of continuous, single-layer, pristine graphene to standard Quan- tifoil TEM grids. We compare

  17. NASA TECHNICAL NOTE APOLLO EXPERIENCE REPORT -

    E-Print Network [OSTI]

    Rathbun, Julie A.

    .' 1 * . NASA TECHNICAL NOTE APOLLO EXPERIENCE REPORT - SPACECRAFT STRUCTURAL WINDOWS by Oruis E(s)) ' Apollo Spacecraft * Chemically Tempered ' Fracture Mechanics 'h e a l e d Glass * Coatings ' Thermally is presented for the Apollo command and lunar modules. This report presents window design philosophy, design

  18. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    K K DANE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, 28 November, 2002 IR-12 together with the total losses around the rings. Results seem encouraging, as calculated loss rates at IR2 in details and compared to calculated losses for the KLOE and the DEAR cases. 1 Introduction Background rates

  19. BNL/SNS TECHNICAL NOTE R. Witkover

    E-Print Network [OSTI]

    BNL/SNS TECHNICAL NOTE NO. 126 R. Witkover TechSource, Inc. Santa Fe, NM September 2, 2003 COLLIDER BLM Signal Calibration Constants R. Witkover TechSource, Inc. Santa Fe, NM Background The Beam Loss Monitor (BLM) system is designed to measure beam losses in the SNS using Ion Chambers supplied by BNL

  20. Section Notes 3 The Simplex Algorithm

    E-Print Network [OSTI]

    Chen, Yiling

    Section Notes 3 The Simplex Algorithm Applied Math 121 Week of September 22, 2014 Goals for the week · understand how to get from an LP to a simplex tableau. · be familiar with reduced costs, optimal solutions, different types of variables and their roles. · understand the steps of simplex phases I and II

  1. Section Notes 3 The Simplex Algorithm

    E-Print Network [OSTI]

    Chen, Yiling

    Section Notes 3 The Simplex Algorithm Applied Math 121 Week of February 14, 2011 Goals for the week · understand how to get from an LP to a simplex tableau. · be familiar with reduced costs, optimal solutions, different types of variables and their roles. · understand the steps of simplex phases I and II. · be able

  2. Section Notes 3 The Simplex Algorithm

    E-Print Network [OSTI]

    Chen, Yiling

    Section Notes 3 The Simplex Algorithm Applied Math 121 Week of February 17, 2014 Goals for the week · understand how to get from an LP to a simplex tableau. · be familiar with reduced costs, optimal solutions, different types of variables and their roles. · understand the steps of simplex phases I and II. · be able

  3. TECHNICAL NOTES Drought Storage Allocation Rules for Surface

    E-Print Network [OSTI]

    Pasternack, Gregory B.

    TECHNICAL NOTES Drought Storage Allocation Rules for Surface Reservoir Systems Jay R. Lund1 Abstract: This technical note develops a simple drought storage allocation rule to minimize evaporative and seepage water losses from a system of reservoirs. Such a rule might have value during a prolonged drought

  4. Environmental effects of dredging. Risk assessment: An overview of the process. Technical note

    SciTech Connect (OSTI)

    Dillon, T.M.; Engler, R.M.

    1991-12-01T23:59:59.000Z

    This technical note provides a nontechnical overview of the risk assessment process. A companion technical note regarding risk assessment terminology will be published in the near future.

  5. NIST Technical Note 1637 Modeling the Effects of Outdoor Gasoline

    E-Print Network [OSTI]

    Bentz, Dale P.

    Carbon Monoxide Exposures Liangzhu (Leon) Wang Steven J Emmerich #12;NIST Technical Note 1637 Modeling Steven J Emmerich Building Environment Division Building and Fire Research Laboratory August 2009 U

  6. Technical Note Variational free energy and the Laplace approximation

    E-Print Network [OSTI]

    Daunizeau, Jean

    Technical Note Variational free energy and the Laplace approximation Karl Friston,a, Jérémie October 2006 This note derives the variational free energy under the Laplace approximation, with a focus. This is relevant when using the free energy as an approximation to the log-evidence in Bayesian model averaging

  7. DA NE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    K K DA NE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, Sept. 2, 1991 Note: G-7 ENERGY LOSS DUE TO THE BROAD-BAND IMPEDANCE IN DA NE L. Palumbo, M. Serio 1. INTRODUCTION The Broad-Band (BB to simplify the evaluation of single-bunch instability thresholds and parasitic losses [1]. Lacking detailed

  8. DA NE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    K K DA NE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, April 6, 1992 Note: G-13 RF ENERGY LOSSES AND IMPEDANCE OF THE DA NE ACCUMULATOR RING VACUUM CHAMBER S. Bartalucci, L. Palumbo, M chamber. This field acts back on the beam and it is re- sponsible for energy losses and instabilities. We

  9. Environmental effects of dredging. Evaluating environmental effects of dredged material management alternatives - a technical framework. Technical notes

    SciTech Connect (OSTI)

    Palermo, M.R.; Francingues, N.R.; Engler, R.M.

    1993-02-01T23:59:59.000Z

    This Technical Note presents a brief description of a joint U.S. Army Corps of Engineers (USACE) and U.S. Environmental Protection Agency (USEPA) Technical Framework for the identification of environmentally acceptable alternatives for the management of dredged material. This Technical Note replaces the earlier Technical Note EEDPA-06-14, which should be discarded.

  10. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    of the utilities (electrical power substation and cooling system) in the linac tunnel and klystron gallery before. Hutton (CEBAF), Chairman W. Scandale (CERN) A. Wrülich (ST) Overall Project Progress and Status The Committee noted the progress made since the last Review and is pleased to see that the major Project

  11. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    THE RADIOFREQUENCY SYSTEM FOR DANE: FIRST REMARKS R. Boni, A. Gallo INTRODUCTION This note presents some considerations on the Radiofrequency System (RFS) for DANE. It is worthed to mention that the RFS has to supply to the beams the energy lost by synchrotron radiation and parasitic losses. We propose two different solutions

  12. Energy and Society Week 6 Section Plan GSI Notes

    E-Print Network [OSTI]

    Kammen, Daniel M.

    standard deviations account for about 99 percent of the data. You can also use a Z-table in any stats book. Renewable energy sources like wind and solar PV are intermittent and, by themselves, reduce the reliability1 Energy and Society Week 6 Section Plan ­ GSI Notes AGENDA 1. Get feedback on section from

  13. Environmental effects of dredging technical notes. Assessment of the genotoxic potential of dredged material. Technical notes

    SciTech Connect (OSTI)

    NONE

    1996-08-01T23:59:59.000Z

    This technical note describes an approach for assessing the genotoxic potential of dredged material. The use of integrated batteries of rapid and mechanistically interpretable in vitro and in vivo assays in a tiered approach is fundamental to applied toxicology. The research described here brings this approach to the testing of sediments. Work completed to date and future work will mesh to form an advanced and cost-effective methodology. The purpose of this methodology is to increase the accuracy of environmental risk assessments and facilitate making decisions concerning open-water disposal of dredged material. A great number of the contaminants typically found in dredged material are toxic to exposed organisms through effects on DNA. Such effects are usually the result of low-level chronic exposures. These effects can result in reproductive failure of organisms, impaired growth and development of offspring, and tumors (often cancerous) in vertebrates. Collectively, such effects are called `genotoxicity` and result from damage to the genome of a cell. The damage is heritable, that is, passed on to future cell generations upon duplication of the affected cells.

  14. Pre-Approved1 Chemical Engineering Technical Electives (NOTE: Technical Electives Engineering Electives Bioengineering Electives)2

    E-Print Network [OSTI]

    Dyer, Bill

    EELE 250 Circuits, Devices, and Motors [F,S] 4 EENV 340 Principles of Environmental Engineering [F,S] 3Pre-Approved1 Chemical Engineering Technical Electives (NOTE: Technical Electives Engineering Biochemistry of Macromolecules [F] 3 BIOB 256 Intro Biol: Cells to Organisms [S] 3+1 BIOB 375 General Genetics

  15. Pre-Approved1 Chemical Engineering Technical Electives (NOTE: Technical Electives Engineering Electives Bioengineering Electives)2

    E-Print Network [OSTI]

    Lawrence, Rick L.

    & Design [S] 3 EIND 354 Engr Probability and Statistics I [F] 3 EIND 434 Project and Engineering Management [F] 3 EMAT 252 Materials Science Laboratory [F,S] 1 EMAT 452 Adv. Engineering Materials [on demand] 3Pre-Approved1 Chemical Engineering Technical Electives (NOTE: Technical Electives Engineering

  16. TECHNICAL NOTES Relation between SaffirSimpson Hurricane

    E-Print Network [OSTI]

    Kareem, Ahsan

    TECHNICAL NOTES Relation between Saffir­Simpson Hurricane Scale Wind Speeds and Peak 3-s Gust Abstract: The Saffir­Simpson scale for categorizing hurricane intensity and damage potential is increasingly being used by hurricane forecasters and emergency managers. The hurricane intensity categories

  17. BLUE: An Interactive Visualization System for Categorical Data Technical Note

    E-Print Network [OSTI]

    Kerbs, R. W.

    BLUE: An Interactive Visualization System for Categorical Data Technical Note Robert W. Kerbs. This paper introduces a prototype data visualization system, BLUE, to help induce meaningful decision trees from databases that contain primarily categorical attributes. BLUE is an interactive model creation

  18. Technical Note Correction of Eddy-Current Distortions in Diffusion

    E-Print Network [OSTI]

    Technical Note Correction of Eddy-Current Distortions in Diffusion Tensor Images Using the Known,2 Purpose: To correct eddy-current artifacts in diffusion ten- sor (DT) images without the need to obtain- tortions caused by eddy currents induced by large diffusion gradients. We propose a new postacquisition

  19. Technical note Coolant void worth in fast breeder reactors

    E-Print Network [OSTI]

    Technical note Coolant void worth in fast breeder reactors and accelerator-driven transuranium as a function of fuel composition and core geometry for several model fast breeder reactors and accelerator to be inferior to those employing sodium for pitch-to-diameter ratios exceeding 1.4. It is shown that in reactor

  20. Technical Note Variational free energy and the Laplace approximation

    E-Print Network [OSTI]

    Penny, Will

    Technical Note Variational free energy and the Laplace approximation Karl Friston,a, Jérémie the variational free energy under the Laplace approximation, with a focus on accounting for additional model complexity induced by increasing the number of model parameters. This is relevant when using the free energy

  1. Technical Note/ Impact of Coastal Land Reclamation on

    E-Print Network [OSTI]

    Jiao, Jiu Jimmy

    Technical Note/ Impact of Coastal Land Reclamation on Ground Water Level and the Sea Water Interface by Haipeng Guo1 and Jiu Jimmy Jiao2 Abstract Land reclamation in coastal areas may have water (Fetter 1972; Jiao and Tang 1999), but such an interaction may be modified by land reclamation

  2. Technical Note Evaluation of mechanical rock properties using a Schmidt

    E-Print Network [OSTI]

    Ze'ev, Reches

    Technical Note Evaluation of mechanical rock properties using a Schmidt Hammer O. Katza, b, c, *, Z, 91904, Israel b Geological Survey of Israel, 30 Malkhe Yisrael St., Jerusalem, 95501, Israel c Rock of concrete hardness [1], and was later used to estimate rock strength [2,3]. It con- sists of a spring

  3. Technical note Insertion loss testing of active noise reduction

    E-Print Network [OSTI]

    Wong, Willy

    Technical note Insertion loss testing of active noise reduction headsets using acoustic fixture Jie. Department of Electrical and Computer Engineering, University of Toronto, 10 King's College Road, Toronto, ON measured insertion losses of four types of commercially avail- able ANR headsets using an Acoustic Test

  4. Technical Note Hemodynamic correlates of EEG: A heuristic

    E-Print Network [OSTI]

    Henson, Rik

    Technical Note Hemodynamic correlates of EEG: A heuristic J.M. Kilner,* J. Mattout, R. Henson with a loss of power in lower EEG frequencies, relative to higher frequencies. The fact that activation and electrical responses (Fig. 1, solid black lines). The characterization of the relationship between

  5. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    in the following : - Thermionic gun - Prebuncher at the main LINAC frequency f = 3 GHz. - Standing Wave (SWV . - Positron converter - Capture section - Low current e+e- TW LINAC with output energy 510 MeV. 2 - LINAC.9 Injection into the DR idr 0.5 Converter to DR transport ldr = 0.9 Positron conversion @ 250 MeV c = 8.0 10

  6. Dredging/dredged material management risk assessment. Technical note

    SciTech Connect (OSTI)

    NONE

    1998-09-01T23:59:59.000Z

    This technical note explains the use of risk assessment to facilitate dredged material management decision-making in navigable waterways by US Army Corps of Engineer (USACE) project managers and field operations personnel. The document does not promote risk assessment as a tool for use in every dredged material management decision. It is likely to be most useful, and most used, in those cases that constitute the exception rather than the rule. The use of risk assessment is intended to supplement the analytical options currently available to dredged material managers by building on the existing technical framework (US Environmental Protection Agency (USEPA)/USACE 1992) and the existing tiered approaches (USEPA/USACE 1991, 1998).

  7. TECHNICAL NOTE HEAVY-DUTY DIESEL VEHICLE (HDDV) IDLING ACTIVITY AND

    E-Print Network [OSTI]

    #12;#12;TECHNICAL NOTE HEAVY-DUTY DIESEL VEHICLE (HDDV) IDLING ACTIVITY AND EMISSIONS STUDY: PHASE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Current Diesel Idling Emissions Factors

  8. Technical Section Surface reconstruction using bivariate simplex splines

    E-Print Network [OSTI]

    Li, Xin "Shane"

    Technical Section Surface reconstruction using bivariate simplex splines on Delaunay configurations, Stony Brook, NY 11794-4400, USA a r t i c l e i n f o Article history: Received 13 December 2008 Received in revised form 1 March 2009 Accepted 3 March 2009 Keywords: B-splines Simplex splines Surface

  9. Environmental effects of dredging. Implementation approach for thalweg disposal of dredged material. Technical notes

    SciTech Connect (OSTI)

    Olin, T.J.; Miller, A.C.; Palermo, M.R.

    1993-05-01T23:59:59.000Z

    This technical note introduces the concept of thalweg disposal and associated considerations for implementation, including disposal site selection, environmental and regulatory considerations, and suitable dredging methods and equipment. Monitoring procedures are also outlined.

  10. Automated dredging and disposal alternatives management system (ADDAMS). Environmental effects of dredging. Technical note

    SciTech Connect (OSTI)

    NONE

    1995-01-01T23:59:59.000Z

    This technical note describes the current capabilities and availability of the Automated Dredging and Disposal Alternatives Management System (ADDAMS). The technical note replaces the earlier Technical Note EEDP-06-12, which should be discarded. Planning, design, and management of dredging and dredged material disposal projects often require complex or tedious calculations or involve complex decision-making criteria. In addition, the evaluations often must be done for several disposal alternatives or disposal sites. ADDAMS is a personal computer (PC)-based system developed to assist in making such evaluations in a timely manner. ADDAMS contains a collection of computer programs (applications) designed to assist in managing dredging projects. This technical note describes the system, currently available applications, mechanisms for acquiring and running the system, and provisions for revision and expansion.

  11. Comparing SNePS with Topbraid/Pellet SNeRG Technical Note 42

    E-Print Network [OSTI]

    Shapiro, Stuart C.

    Comparing SNePS with Topbraid/Pellet SNeRG Technical Note 42 Michael Kandefer and Stuart C. Shapiro Editing Tool (Top Quadrant Inc. 2007) using the Pellet OWL DL Reasoner (Clark & Parsia, LLC 2007

  12. Technical Note LiDAR-derived measures of hurricane-and restoration-generated beach

    E-Print Network [OSTI]

    Weishampel, John F.

    are particularly vulnerable, as they rely on specific beaches for reproduction and exhibit high-nest-site fidelityTechnical Note LiDAR-derived measures of hurricane- and restoration-generated beach morphodynamics

  13. Environmental effects of dredging. Engineer manual series on dredging and dredged material disposal. Technical notes

    SciTech Connect (OSTI)

    Palermo, M.R.

    1988-03-01T23:59:59.000Z

    This technical note describes a series of Engineer Manuals (EMs) on dredging and dredged material disposal being published by the Office, Chief of Engineers, US Army. The note describes the purpose of the manual series, intended audience, major topics covered, availability of published manuals, and the status of future manuals.

  14. approach technical note: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for compliance checking Physics Websites Summary: of modeling some regulations in the photovoltaic field to help the delivering of technical assessments-Government 1...

  15. Technical Support Section annual work plan for FY 1995

    SciTech Connect (OSTI)

    Adkisson, B.P.; Hess, R.A.; Kunselman, C.W.; Millet, A.J.; Smelcer, D.R.

    1994-10-01T23:59:59.000Z

    The Technical Support Section (TSS) of the Instrumentation and Controls (I and C) Division of Oak Ridge National Laboratory (ORNL) provides technical services such as fabrication, modification, installation, calibration, operation, repair, and preventive maintenance of instruments and other related equipment. Work performed by TSS is in support of basic and applied research and development (R and D), engineering, and instrument and computer systems managed by ORNL. Because the activities and priorities of TSS must be adapted to the technical support needs of ORNL, the TSS Annual Work Plan is derived from and driven directly by current trends in the budgets and activities of each ORNL division for which TSS provides support. Trends that will affect TSS planning during this period are reductions in the staffing levels of some R and D programs because of attrition or budget cuts and the establishment of new facilities or environmental safety and health programs. The ``Long-Range Work Plan`` is based on estimates of impact of the long-range priorities and directions of the Laboratory. Identifiable proposed new facilities and programs provide additional basis for long-range planning. After identifying long-range initiatives, TSS planning includes future training requirements, reevaluation of qualifications for new-hires, and identification of essential test equipment needed in new work.

  16. Contaminant modeling. Environmental effects of dredging. Technical note

    SciTech Connect (OSTI)

    Bird, S.L.; Dortch, M.

    1988-03-01T23:59:59.000Z

    This note provides initial information on contaminant models that are potentially applicable to situations where the presence of toxic materials in sediments complicates Corps of Engineers (CE) dredging activities.

  17. Environmental effects of dredging. Risk-based testing of dredged material for aquatic disposal evaluations. Technical note

    SciTech Connect (OSTI)

    Dillon, T.M.; Engler, R.M.; Patin, T.R.

    1992-12-01T23:59:59.000Z

    This technical note describes a risk-based framework for testing and evaluating dredged material scheduled for open-water disposal.

  18. Technical support section annual work plan for FY 1996

    SciTech Connect (OSTI)

    Adkissson, B.P.; Allison, K.L.; Hess, R.A.; Kunselman, C.W.; Odom, S.M.; Smelcer, D.R.

    1996-04-01T23:59:59.000Z

    The Technical Support Section (TSS) of the Instrumentation and Controls (I&C) Division of Oak Ridge National Laboratory (ORNL) provides technical services such as fabrication, modification, installation, calibration, operation, repair, and preventive maintenance of instruments and other related equipment. Work performed by TSS is in support of basic and applied research and development (R&D), engineering and instrument and computer systems managed by ORNL. It is the mission of TSS to support programs and policies of ORNL, emphasizing safety and ensuring cost-effective support for R&D. Because the activities and priorities of TSS must be adapted to the technical support needs of ORNL, the TSS Annual Work Plan is derived from and driven directly by current trends in the budgets and activities of each ORNL division for which TSS provides support. Trends that will affect TSS planning during this period are reductions in the staffing levels of some R&D programs because of attrition or budget cuts and the establishment of new facilities or environmental safety and health programs. TSS does not have an annual budget to cover operating expenses incurred in providing instrumentation maintenance support to ORNL. Each year TSS contacts ORNL division finance managers or division finance officers to obtain information concerning projected funding levels of programs and facilities they manage. Although TSS has no direct responsibility for the maintenance or repair of real property, it does perform breakdown maintenance, preventive maintenance and calibration of laboratory, production, and experimental equipment, all of which is used for programmatic purposes. Operating expense funds from supported divisions support this type of equipment.

  19. Technical Note: Updated durability/composition relationships for Hanford high-level waste glasses

    SciTech Connect (OSTI)

    Piepel, G.F.; Hartley, S.A.; Redgate, P.E.

    1996-03-01T23:59:59.000Z

    This technical note presents empirical models developed in FYI 995 to predict durability as functions of glass composition. Models are presented for normalized releases of B, Li, Na, and Si from the 7-day Product Consistency Test (PCT) applied to quenched and canister centerline cooled (CCC) glasses as well as from the 28-day Materials Characterization Center-1 (MCC-1) test applied to quenched glasses. Models are presented for Composition Variation Study (CVS) data from low temperature melter (LTM) studies (Hrma, Piepel, et al. 1994) and high temperature melter (HTM) studies (Vienna et al. 1995). The data used for modeling in this technical note are listed in Appendix A.

  20. Seasonal restrictions on dredging operations in freshwater systems. Technical note

    SciTech Connect (OSTI)

    Sanders, L.; Killgore, J.

    1989-05-01T23:59:59.000Z

    This note summarizes the status of seasonal restrictions on dredging operations in freshwater navigable waterways. The information presented is based on replies received from a questionnaire sent to all US Army Corps of Engineers (CE) District and Division offices that conduct OM dredging operations in freshwater systems.

  1. Yoram Rubin notes made at the Hydrology Section Award Ceremony, December 2005, San Francisco

    E-Print Network [OSTI]

    Rubin, Yoram

    Yoram Rubin notes made at the Hydrology Section Award Ceremony, December 2005, San Francisco Dear Hydrology Section president Rafael Bras and President-elect George Hornberger, members of the hydrology of the breadth of possibilities that hydrology represents overall. Hence, I was grateful to be reminded, during

  2. Computational Science Technical Note CSTN-052 Simulation Modelling and Visualisation: Toolkits for Building Artificial Worlds

    E-Print Network [OSTI]

    Hawick, Ken

    }, title = {Simulation Modelling and Visualisation: Toolkits for Building Artificial Worlds}, journal0 Computational Science Technical Note CSTN-052 Simulation Modelling and Visualisation: Toolkits for Building Artificial Worlds Daniel Peter Playne and Anton P Gerdelan and Arno Leist and Chris J Scogings

  3. ARDB Technical Note 120 E157 A CONTINUOUS PLASMA FINAL FOCUS

    E-Print Network [OSTI]

    ARDB Technical Note 120 E157 A CONTINUOUS PLASMA FINAL FOCUS David H. Whittum Preface This report Aug 28 - Sept 1, 1989. It was subsequently published as D. H. Whittum, "Continuous plasma final focus, where "100 GeV" is stated, it should have read "100 MeV". #12;LBL-27965 A CONTINUOUS PLASMA FINAL FOCUS

  4. Technical note Barriers and opportunities for passive removal of indoor ozone

    E-Print Network [OSTI]

    Siegel, Jeffrey

    Technical note Barriers and opportunities for passive removal of indoor ozone Elliott T. Gall presents a Monte Carlo simulation to assess passive removal materials (PRMs) that remove ozone of homes in Houston, Texas, were taken from the literature and combined with back- ground ozone removal

  5. Unpublished Technical Note A First-Order Horn-Clause Abductive System

    E-Print Network [OSTI]

    Mooney, Raymond J.

    Unpublished Technical Note A First-Order Horn-Clause Abductive System and Its Use in Plan to construct explanations for observed phenomena. In this paper, we view explanation as abduction, where an abductive explanation is a consistent set of assumptions which, together with background knowledge

  6. Smith, D.C., et al., 2000 ODP Technical Note 28

    E-Print Network [OSTI]

    Smith, D.C., et al., 2000 ODP Technical Note 28 METHODS FOR QUANTIFYING POTENTIAL MICROBIAL CONTAMINATION DURING DEEP OCEAN CORING 1,2 David C. Smith,3 Arthur J. Spivack,4 Martin R. Fisk,5 Shelley A that these contamination tests be routinely conducted when coring for microbiological studies. 1Smith, D.C., Spivack, A

  7. Technical Note Field Test of Digital Photography Biomass Estimation Technique in Tallgrass Prairie

    E-Print Network [OSTI]

    Morrison, Lloyd W.

    Technical Note Field Test of Digital Photography Biomass Estimation Technique in Tallgrass Prairie unmeasured because of the time required to clip plots and process samples, as well as limited access or proximity to a drying oven. We tested the digital photography biomass estimation technique for measuring

  8. Technical Note Comparing Dynamic Causal Models using AIC, BIC and Free Energy

    E-Print Network [OSTI]

    Penny, Will

    Technical Note Comparing Dynamic Causal Models using AIC, BIC and Free Energy W.D. Penny Wellcome) and Dynamic Causal Models (DCMs). We find that the Free Energy has the best model selection ability, to instead score DCMs using the Free Energy (Friston et al., 2007a). However, until now there has been

  9. Technical Note Design and modeling of a fluid-based micro-scale electrocaloric

    E-Print Network [OSTI]

    McGaughey, Alan

    Technical Note Design and modeling of a fluid-based micro-scale electrocaloric refrigeration system a c t A refrigeration system composed of silicon MEMS cooling elements is designed based. The main advantage of EC cooling over magnet- ocaloric cooling (which operates on an analogous principle

  10. Technical note: Characterizing individual milk fat globules with holographic video microscopy

    E-Print Network [OSTI]

    Grier, David

    Technical note: Characterizing individual milk fat globules with holographic video microscopy Fook representation of holographic video microscopy. The sample scatters light from a collimated laser beam. Both to a video camera, which records their interference as a hologram. A typical example of one fat droplet

  11. Technical note: Curve fitting with the R Environment for Statistical D G Rossiter

    E-Print Network [OSTI]

    Rossiter, D G "David"

    an extensive discussion of the S language, R graphics, and many statistical methods, as well as a bibliographyTechnical note: Curve fitting with the R Environment for Statistical Computing D G Rossiter for sta- tistical computing and visualisation [2, 5] and its dialect of the S language. R provides

  12. TECHNICAL NOTE Development of new microsatellite primers for green and white

    E-Print Network [OSTI]

    May, Bernie

    TECHNICAL NOTE Development of new microsatellite primers for green and white sturgeon Karrigan Bo for microsatellite loci were developed from microsatellite motif enriched geno- mic libraries of pooled DNA from the polyploid green and white sturgeon (Acipenser medirostris and A. transmont- anus). Four individuals from

  13. BNL/SNS TECHNICAL NOTE R. Witkover, D. Gassner, C. Mi

    E-Print Network [OSTI]

    BNL/SNS TECHNICAL NOTE NO. 118 R. Witkover, D. Gassner, C. Mi BNL, Upton, NY 11973, USA October 31, 2002 The SNS BLM System is designed to measure beam losses from a maximum 1% local loss down to a 1 W/m operating loss tolerance. In fact, resolution of 1 % of the 1 W/m threshold has been requested. This amounts

  14. BNL/SNS TECHNICAL NOTE D.Raparia, J. Alessi, Y. Y. Lee

    E-Print Network [OSTI]

    BNL/SNS TECHNICAL NOTE NO. 065 D.Raparia, J. Alessi, Y. Y. Lee August 19, 1999 ALTERNATING GRADIENT is the low uncontrolled beam losses (w/m) to allow hands on maintenance. To achieve such low beam losses of uncontrolled beam losses, HEBT is equipped with five sets of beam halo scrapers. The ratio of aperture to RMS

  15. Environmental effects of dredging, initial comparisons of six assays for the assessment of sediment genotoxicity. Technical note

    SciTech Connect (OSTI)

    McFarland, V.A.; Honeycutt, M.; Jarvis, S.

    1995-01-01T23:59:59.000Z

    This technical note reports and compares initial results of six genotoxicity bioassays applied to dredged sediments and describes progress toward development of a testing protocol to aid in regulatory decisionmaking when genotoxic chemicals are an issue of concern. The Long-term Effects of Dredging Operations Program work unit Genotoxicity of Contaminated Dredged Material was initiated in fiscal year 1990 to develop methods for assessing the genotoxic potential of dredged sediments. The impetus driving this new research and development effort was specific regulatory language in section 103 of the Ocean Dumping Act (Marine Protection, Research, and Sanctuaries Act (MPRSA) of 1972) prohibiting the open-water discharge of mutagenic, carcinogenic, or teratogenic substances in other than trace amounts, and language less specific but of similar intent in section 404 of the Clean Water Act (CWA).

  16. TECHNICAL NOTES Synthesis and Characterization of Covalently Linked

    E-Print Network [OSTI]

    thiol-terminated ssDNA. EXPERIMENTAL SECTION Chemicals. Reagent grade chloroform, dichloro- methane. Thiol-terminated 12-base oligonucleotides were added to second- and third-generation triazine-based thiol/ disulfide exchange chemistry, thiol-terminated 12-base oligonucleotide sequences were added

  17. Evaluation of a tritium runway-lighting system. Technical note

    SciTech Connect (OSTI)

    Katz, E.S.

    1992-04-01T23:59:59.000Z

    A tritium powered runway lighting system was installed and evaluated at the Federal Aviation Administration (FAA) Technical Center. The purpose of this evaluation was to determine if the tritium runway lighting system would safely support Federal Aviation Regulations (FAR) Part 135 commercial operations, during nighttime visual flight rules (VFR) conditions at remote airports. Subject pilots having flight experience levels appropriate for pilots conducting FAR Part 135 air taxi operations were afforded the opportunity of flight testing the system. Results of the evaluation indicate that the tritium runway lighting system does not meet all of the minimum criteria necessary for FAA approval and, therefore, would not guarantee an acceptable level of safety. Tritium Runway Lighting System, Remote Airports.

  18. Energy and Society GSI Section Notes Week of October 6, 2014

    E-Print Network [OSTI]

    Kammen, Daniel M.

    representations of costs Important terms and concepts: Present value P The value of any past, future or current1 Energy and Society GSI Section Notes ­ Week of October 6, 2014 Content: 1. Economic Analysis 2 payback Converting between present and future values Converting between NPV and annualized

  19. TECHNICAL NOTE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our InstagramStructureProposed Action(InsertAbout theSystems3, RevisionTEI Core

  20. Alternative energy sources for non-highway transportation: technical section

    SciTech Connect (OSTI)

    Not Available

    1980-06-01T23:59:59.000Z

    Eighteen different alternative fuels were considered in the preliminary screening, from three basic resource bases. Coal can be used to provide 13 of the fuels; oil shale was the source for three of the fuels; and biomass provided the resource base for two fuels not provided from coal. In the case of biomass, six different fuels were considered. Nuclear power and direct solar radiation were also considered. The eight prime movers that were considered in the preliminary screening are boiler/steam turbine; open and closed cycle gas turbines; low and medium speed diesels; spark ignited and stratified charge Otto cycles; electric motor; Stirling engine; free piston; and fuel cell/electric motor. Modes of transport considered are pipeline, marine, railroad, and aircraft. Section 2 gives the overall summary and conclusions, the future outlook for each mode of transportation, and the R and D suggestions by mode of transportation. Section 3 covers the preliminary screening phase and includes a summary of the data base used. Section 4 presents the methodology used to select the fuels and prime movers for the detailed study. Sections 5 through 8 cover the detailed evaluation of the pipeline, marine, railroad, and aircraft modes of transportation. Section 9 covers the demand related issues.

  1. Environmental effects of dredging. Evaluation of sediment genotoxicity. Workshop summary and conclusions. Technical notes

    SciTech Connect (OSTI)

    NONE

    1990-10-01T23:59:59.000Z

    This Technical Note summarizes the proceedings of a workshop that was held March 6-8,1990, at the Environmental Laboratory, US Army Engineer Waterways Experiment Station. The purpose of the workshop was to gain guidance from recognized authorities for the development of sediment bioassays of genotoxicity, that is, mutagenicity, carcinogenicity, immunotoxicity, teratogenicity, and histopathologic potential. The conclusions of the workshop are being used to identify existing genotoxicity bioassays that show promise for application in evaluating sediments, to recommend modifications for testing sediments, and to help direct subsequent research and development of bioassays of genotoxicity by the US Army Corps of Engineers.

  2. Environmental effects of dredging: The use of population modeling to interpret chronic sublethal sediment bioassays. Technical notes

    SciTech Connect (OSTI)

    Bridges, T.S.; Dillon, T.M.

    1993-08-01T23:59:59.000Z

    This technical note provides a brief introduction to population modeling and describes the application and utility of such techniques for dredged material bioassays. The use of population modeling as a source of interpretive guidance for chronic sublethal dredged material bioassays is emphasized. Current laws and regulations governing the discharge of dredged material stress the importance of assessing the chronic (long-term) sublethal effects of dredging operations. Regulations implementing section 103 of the Marine Protection, Research and Sanctuaries Act (PL 92-532) state that, `Materials shall be deemed environmentally acceptable for ocean dumping only when . . . no significant undesirable effects will occur due either to chronic toxicity or to bioaccumulation........`. Similar language is used in regulations implementing section 404(b)(1) of the Clean Water Act (FL 92-500) which reads: `The permitting authority shall determine in writing the potential short-term or long-term effects of a proposed discharge of dredged or fill material on the physical, chemical, and biological components of the aquatic environment.........It also stipulates that tests may be required to provide information on the effect of the discharge material on communities or populations of organisms.`

  3. Environmental effects of dredging. Interim guidance for predicting quality of effluent discharged from confined dredged material disposal areas--data analysis. Technical note

    SciTech Connect (OSTI)

    Palermo, M.R.; Engler, R.M.

    1985-06-01T23:59:59.000Z

    The following series of technical notes described the functions necessary for predicting the quality of effluent discharged from confined dredged material disposal areas during dredging operations.

  4. Environmental effects of dredging: Guide to selecting a dredge for minimizing resuspension of sediment. Technical notes

    SciTech Connect (OSTI)

    Hayes, D.F.

    1986-12-01T23:59:59.000Z

    This technical note contains assessments of conventional and special-purpose dredges in removing sediment with minimal sediment resuspension. If sediment resuspension is a critical factor in dredging areas of contaminated material, the following guidance will aid in specifying the dredge and operating conditions. Investigations were conducted as part of the Corps of Engineers Improvement of Operations and Maintenance Techniques (IOMT) Research Program to evaluate the resuspension of sediment into the water column due to dredging operations. Laboratory, field, and literature studies have been used to define the sediment resuspension characteristics of most conventional and several special-purpose dredges. The natural hydrophobic tendency of most organic contaminants and the high sediment-sorptive capacity for inorganic contaminants limits release to the soluble forms and makes the simple measure of sediment resuspension during dredging a relative measure of the potential for contaminant release.

  5. Environmental effects of dredging: Methods for the assessment of the genotoxic effects of environmental contaminants; cellular and organ/organism effects. Technical Notes

    SciTech Connect (OSTI)

    Honeycutt, M.E.; Jarvis, A.S.; McFarland, V.A.

    1995-07-01T23:59:59.000Z

    This technical note is the second in a series of three that outline and describe the principal methods that have been developed to test the potential of environmental contaminants for causing mutagenic, carcinogenic, and teratogenic effects. This technical note describes methods used to discern genotoxic effects at the cellular and organ/ organism level.

  6. Environmental effects of dredging. The k{sub oc} of nonpolar organic compounds in sediment. Technical notes

    SciTech Connect (OSTI)

    Brannon, J.M.; Pennington, J.C.; Hayes, C.; McFarland, V.

    1992-12-01T23:59:59.000Z

    This technical note describes testing conducted to determine the partitioning of contaminants between sediment organic carbon and sediment interstitial water, assess the effects of sediment organic carbon upon K(oc) of selected PCBs and fluoranthene, and investigate the effect of time of contact between contaminants and sediment upon the value of K(oc). The U.S. Environmental Protection Agency is authorized to develop and implement sediment quality criteria (SQC) under section 304(a) of the Clean Water Act. SQC, when promulgated, will profoundly affect U.S. Army Corps of Engineers (USACE) dredging and disposal operations. Aquatic disposal of dredged material and selection of aquatic disposal sites will be based on SQC. Most SQC approaches currently under development involve a determination of the relationship between contaminant concentrations in sediment and biological effects on organisms exposed to the contaminated sediment. The USACE is presently investigating the link between contaminant levels in sediment and sediment geochemistry, as well as contaminant levels and effects in aquatic organisms.

  7. Environmental effects of dredging. Interim results: The relationship between sediment organic carbon and biological uptake of contaminants. Technical note

    SciTech Connect (OSTI)

    Brannon, J.M.; Price, C.B.; Reilly, F.J.

    1991-11-01T23:59:59.000Z

    This technical note describes testing conducted to determine the partitioning of contaminants between sediment organic carbon and sediment interstitial water, assess the effects of sediment organic carbon upon bioaccumulation of a selected polychlorinated biphenyl (PCB) and polycyclic aromatic hydrocarbon (PAH) by two organisms, and investigate the accuracy of the apparent preference factor as a predictive tool by comparing predicted uptake with actual uptake.

  8. Environmental effects of dredging: Methods for the assessment of the genotoxic effects of environmental contaminants. Glossary and references. Technical notes

    SciTech Connect (OSTI)

    Honeycutt, M.E.; Jarvis, A.S.; McFarland, V.A.

    1995-07-01T23:59:59.000Z

    This technical note is the third in a series of three that outline and describe the principal methods that have been developed to test the potential of environmental contaminants to cause mutagenic, carcinogenic, and teratogenic effects. The first in this series (EEDP-04-24) describes methods used to discern genotoxic effects at the sub cellular level, while the second (EEDP-04-25) describes methods used to discern genotoxic effects at the cellular and organ/organism level. Recent literature citations for each topic referenced in this series of technical notes are provided in this technical note, in addition to a glossary of terms. The information in these technical notes is intended to provide Corps of Engineers personnel with a working knowledge of the terminology and conceptual basis of genotoxicity testing. To develop an improved understanding of the concepts of genotoxicity, readers are encouraged to review A Primer in Genotoxicity (Jarvis, Reilly, and Lutz 1993), presented in Volume D-93-3 of the Environmental Effects of Dredging information exchange bulletin.

  9. Sediment chemistry profiles of capped dredged sediment deposits taken 3 to 11 years after capping. Technical note

    SciTech Connect (OSTI)

    Sumeri, A.; Fredette, T.J.; Kullberg, P.G.; Germano, J.D.; Carey, D.A.

    1994-05-01T23:59:59.000Z

    This technical note summarizes sediment chemistry profile results from coring studies of capped dredged sediment deposits. These studies document the long-term effectiveness of capping for isolating contaminated sediments from the aquatic environment and should serve to broaden the information base for making management decisions.

  10. Pre-Approved1 Engineering Electives for Biological Engineering (NOTE: Technical Electives Engineering Electives Bioengineering Electives)2

    E-Print Network [OSTI]

    Lawrence, Rick L.

    Probability and Statistics I [F] 3 EIND 434 Project and Engineering Management [F] 3 EMAT 252 Materials Science Laboratory [F,S] 1 EMAT 452 Adv. Engineering Materials [on demand] 3 EMEC 321 Thermodynamics II [FPre-Approved1 Engineering Electives for Biological Engineering (NOTE: Technical Electives

  11. Columbia University, EE Technical Report #2011-11-11, Nov. 2011 A Note on Building an Internet Laboratory

    E-Print Network [OSTI]

    Zussman, Gil

    Columbia University, EE Technical Report #2011-11-11, Nov. 2011 A Note on Building an Internet Laboratory Michael S. Kester Dept. of Computer Science Columbia University msk2117@columbia.edu Gil Zussman Dept. of Electrical Engineering Columbia University gil@ee.columbia.edu Abstract--The Networking Lab

  12. P. J. Antsaklis, "On Finite and Infinite Zeros in the Model Matching Problem and in Control Design," Control Systems Technical Note #66, Dept. of Electrical and Computer Engineering, University of Notre

    E-Print Network [OSTI]

    Antsaklis, Panos

    ," Control Systems Technical Note #66, Dept. of Electrical and Computer Engineering, University of Notre Dame and in Control Design," Control Systems Technical Note #66, Dept. of Electrical and Computer Engineering Matching Problem and in Control Design," Control Systems Technical Note #66, Dept. of Electrical

  13. Environmental effects of dredging. Technical considerations for application of leach tests to sediments and dredged material. Technical notes

    SciTech Connect (OSTI)

    Myers, T.E.; Brannon, J.M.

    1991-10-01T23:59:59.000Z

    This note summarizes the characteristics of and differences among laboratory leach tests used for preproject evaluation of leachate quality in confined disposal facilities (CDFs) for dredged material. The guidance provided in this note is based on ongoing research conducted under the Long-Term Effects of Dredging Operations (LEDO) Program.

  14. Environmental effects of dredging. Long-term management strategy (LTMS) national forum: Corps of Engineers summary and findings. Technical notes

    SciTech Connect (OSTI)

    Mathis, D.B.; Francingues, N.R.

    1991-12-01T23:59:59.000Z

    This Technical Note summarizes the `National Forum on Implementation Strategies of Long-Term Management of Dredged Material` held January 28-31, 1991, at Baltimore, MD. The findings of the Forum have been documented in a report to be published by the Environmental Effects of Dredging Programs (EEDP) in FY 92. The information gained from the Forum participants is also being incorporated into proposed policy and technical guidance to help direct, develop, and implement Long-Term Management Strategy (LTMS) studies and plans by the US Army Corps of Engineers (USACE).

  15. Environmental effects of dredging: Sediment resuspension by selected dredges. Technical note

    SciTech Connect (OSTI)

    Havis, R.N.

    1988-03-01T23:59:59.000Z

    The size and concentration of sediment plumes measured in field studies of selected dredging equipment are described. This information is useful when sediment resuspension must be minimized because of adverse environmental impacts which may include the release of sediment-associated chemical contaminants. The information presented here is intended to supplement and update information given in a previous technical note on the same topic (Hayes 1986a). Dredging operations may be required to comply with in-stream State water quality standards based on maximum allowable concentrations of inorganic and organic compounds. Although the majority of materials requiring maintenance dredging in the United States is uncontaminated, the removal of contaminated sediments (estimated to be less than 10 percent of maintenance materials) poses a serious problem. Hence, a project to study the potential for contaminant release during dredging has been initiated through a field studies program. The field studies described here were conducted by the Waterways Experiment Station under the Improvement of Operations and Maintenance Techniques (IOMT) research program and in cooperation with other US Army Engineer Districts to evaluate the sediment resuspension characteristics of selected dredges (McLellan et al., in preparation).

  16. Environmental effects of dredging. Relationship between pcb tissue residues and reproductive success of fathead minnows. Technical notes

    SciTech Connect (OSTI)

    NONE

    1988-04-01T23:59:59.000Z

    This technical note provides initial guidance for interpreting the biological consequences of bioaccumulation in aquatic organisms. Specifically, the relationship between polychlorinated biphenyl (PCB) tissue residues and reproductive success in the fathead minnow, Pimephales promelas, is examined. The US Army Corps of Engineers often conducts, or requires to be conducted, an assessment of potential bioaccumulation of environmental contaminants from sediments scheduled for dredging and open-water disposal. At present, however, there is no generally accepted guidance to assist in the interpretation of the biological consequences of specific levels of bioacumulation. To provide an initial basis for such guidance, the Environmental Laboratory of the US Army Engineer Waterways Experiment Station is conducting both literature data base analyses and experimental laboratory studies as part of its Long-Term Effects of Dredging Operations (LEDO) Program. This technical note discusses a portion of the laboratory effort.

  17. BNUSNS TECHNICAL NOTE D. Raparia,I. Alessi, Y. Y. Lee, I. Wei andW. T. Weng

    E-Print Network [OSTI]

    BNUSNS TECHNICAL NOTE NO.070 D. Raparia,I. Alessi, Y. Y. Lee, I. Wei andW. T. Weng January 14.,..B fractional loss p er meter u --A I Where B is the magnetic field in Tesla, r3,'1are relativistic parameters the magnetic filed of 0.3 Tesla was chosen to keep the stripping losses down to 1.2 x 10-7per meter. To keep

  18. Environmental effects of dredging. Interim guidance for predicting quality of effluent discharged from confined dredged material disposal areas--test procedures. Technical note

    SciTech Connect (OSTI)

    Palermo, M.R.; Engler, R.M.

    1985-06-01T23:59:59.000Z

    The purpose of the following series of technical notes describe the functions necessary for predicting the quality of effluent discharged from confined dredged material disposal areas during dredging operations.

  19. Environmental effects of dredging. Documentation of the efqual module for ADDAMS: Comparison of predicted effluent water quality with standards. Technical notes

    SciTech Connect (OSTI)

    Palermo, M.R.; Schroeder, P.R.

    1991-11-01T23:59:59.000Z

    This technical note describes a technique for comparison of the predicted quality of effluent discharged from confined dredged material disposal areas with applicable water quality standards. This note also serves as documentation of a computer program called EFQUAL written for that purpose as part of the Automated Dredging and Disposal Alternatives Management System (ADDAMS).

  20. Environmental effects of dredging. Managing dredged material via thin-layer disposal in coastal marshes. Technical notes

    SciTech Connect (OSTI)

    Wilber, P.

    1993-07-01T23:59:59.000Z

    This technical note describes how dredged material can be successfully managed in an environmentally sound manner in marshes by placing it in layers of 5 to 15 cm. (Unless otherwise indicated, all layer thicknesses indicated in this report refer to material that has undergone postdisposal consolidation.) Environmental studies of this process and of the regulatory history of thin-layer disposal in marshes are summarized. General planning and monitoring considerations are described, including descriptions of the types of equipment used to place dredged material in thin layers in marshes.

  1. BNL/SNS TECHNICAL NOTE D. Davino, H. Hahn, M. Blaskiewicz

    E-Print Network [OSTI]

    the top (left) and of the transverse section (right). Also shown is a sketch of a 40 carborundum rod

  2. Environmental effects of dredging: A preliminary evaluation of contaminant release at the point of dredging. Technical notes

    SciTech Connect (OSTI)

    Havis, R.N.; Amande, R.A.

    1988-04-01T23:59:59.000Z

    The purpose of this technical note is to present a preliminary evaluation of the standard elutriate test as a predictor of contaminant release (dissolved form) to the water column at the point of dredging. This note is meant to extend previous notes (Hayes 1987, Havis 1987) which dealt with resuspension of sediments due to dredging and the release of adsorbed chemicals which could enter the water phase at the point of dredging. Data collected under the Dredged Material Research Program (DMRP) showed that the standard elutriate test (Keeley and Engler 1974, US Environmental Protection Agency and US Army Corps of Engineers 1977, Environmental Effects Laboratory 1976) predicted, within an order of magnitude, dissolved chemical concentrations in water at dredged material disposal sites (Jones and Lee 1978). The potential for contaminant release also exists, however, at the point of dredging. This source of contaminant release during dredging was investigated by McLellan et al. (in preparation) under the Improvement of Operations and Maintenance Techniques (IOMT) program. Because of the success of the standard elutriate test for simulating dissolved contaminant release at the disposal site it was investigated as a tool for predicting contaminant release at the point of dredging.

  3. Environmental effects of dredging: Naturally occurring levels of ammonia and sulfide in pore water: An assessment of the literature. Technical notes

    SciTech Connect (OSTI)

    NONE

    1995-05-01T23:59:59.000Z

    Ammonia and sulfide are natural constituents of sediment. Both are very toxic to aquatic organisms. Consequently, their presence may bias dredged material toxicity bioassays that are designed to evaluate the toxicity of persistent contaminants such as heavy metals and petroleum and chlorinated hydrocarbons. The purpose of this technical note is to summarize published information on sediment pore water ammonia and sulfide concentrations that occur in situ. In a subsequent technical note, this exposure information will be coupled with ammonia and sulfide toxicity data to estimate the potential influence of these constituents on dredged material toxicity bioassays.

  4. Environmental effects of dredging. Documentation of the dyecon module for ADDAMS: Determining the hydraulic retention and efficiency of confined disposal facilities. Technical note

    SciTech Connect (OSTI)

    Hayes, D.F.; Schroeder, P.R.; Engler, R.M.; Patin, T.R.

    1992-12-01T23:59:59.000Z

    This technical note describes procedures for determining mean hydraulic retention time and efficiency of a confined disposal facility (CDF) from a dye tracer slug test. These parameters are required to properly design a CDF for solids retention and for effluent quality considerations. Detailed information on conduct and analysis of dye tracer studies can be found in Engineer Manual 1110-2-5027, Confined Dredged Material Disposal. This technical note documents the DYECON computer program which facilitates the analysis of dye tracer concentration data and computes the hydraulic efficiency of a CDF as part of the Automated Dredging and Disposal Alternatives Management System (ADDAMS).

  5. Environmental effects of dredging: Predicting and monitoring dredge-induced dissolved oxygen reduction. Technical notes

    SciTech Connect (OSTI)

    Houston, L.; LaSalle, M.W.; Lunz, J.D.

    1989-11-01T23:59:59.000Z

    This note summarizes the results of research into the potential for dissolved oxygen (DO) reduction associated with dredging operations. Efforts toward development of a simple computational model for predicting the degree of dredge-induced DO reduction are described along with results of a monitoring program around a bucket dredge operation.

  6. MA 15910 Lesson 11 Notes (Calculus part of text) Section 3.3 Rates ...

    E-Print Network [OSTI]

    Bailey, Charlotte M

    2014-09-25T23:59:59.000Z

    (Calculus part of text) Section 3.3 Rates of Change. Average Rate of Change. Suppose Mary kept a record of the total distance she traveled on a trip in ½ hour

  7. Documentation of the runqual module for ADDAMS: Comparison of predicted runoff water quality with standards. Environmental effects of dredging. Technical notes

    SciTech Connect (OSTI)

    Schroeder, P.R.; Gibson, A.C.; Dardeau, E.A.

    1995-01-01T23:59:59.000Z

    This technical note has a twofold purpose: to describe a technique for comparing the predicted quality of surface runoff from confined dredged material disposal areas with applicable water quality standards and to document a computer program called RUNQUAL, written for that purpose as a part of the Automated Dredging and Disposal Alternatives Management System (ADDAMS).

  8. Electronics Division Technical Note No. 189 File: \\\\EAGLE\\cv-cdl-sis\\Docs\\Rack\\SIS Mixer Bias Supply\\Simulation\\Report2.doc Page 1 of 5

    E-Print Network [OSTI]

    Groppi, Christopher

    1 to protect the mixer junction from static discharge1 . The mixers are powered by bias suppliesElectronics Division Technical Note No. 189 File: \\\\EAGLE\\cv-cdl-sis\\Docs\\Rack\\SIS Mixer Bias Supply\\Simulation\\Report2.doc Page 1 of 5 Stability Analysis of SIS Mixer Bias Supply with 1K Ohm

  9. Environmental effects of dredging: CE sediment collection and analysis methods. Technical note

    SciTech Connect (OSTI)

    Higgins, T.R.; Lee, C.R.

    1987-07-01T23:59:59.000Z

    This note summarizes responses to a recent survey of US Corps of Engineers (CE) sediment collection and analysis methods used in conjunction with planning dredging and disposal operations. The survey was designed to provide an overview of sediment collection and analysis programs and how these programs are conducted. Information gathered from the survey will be used to generate topics of discussion for a meeting to be held in June 1987 on sediment-analysis cost reduction. The survey and the meeting are part of a multi-year CE effort to reduce the overall costs associated with collecting and analyzing sediment samples.

  10. Environmental effects of dredging: Building, developing, and managing dredged material islands for bird habitat. Technical note

    SciTech Connect (OSTI)

    Landin, M.C.

    1986-12-01T23:59:59.000Z

    This note describes the environmental considerations and techniques that have been developed and tested for building, developing, and managing dredged material islands for use by birds for nesting and other life requirements. The text of this note was taken from lectures presented from 1979 to 1986 at the Dredging Short Courses held each year by the Texas AM University Center for Dredging Studies and from information compiled for Engineer Manual EM 1110-2-5026 entitled `Beneficial Uses of Dredged Material.` One hundred years of dredging and open-water disposal operations by the Corps of Engineers (CE), state agencies, and private enterprise has resulted in the creation of over 2000 man-made islands throughout US coastal waters, riverine waterways, and the Great Lakes. The CE continues to maintain an interest in developing such islands because of its responsibility in using environmentally acceptable disposal methods and sites, the increasing shortage of upland disposal sites, the need for wildlife habitats in waterway areas, and the islands` recreational potential.

  11. MRF Technical Note # 49 Can desert dust explain the anomalous greenhouse

    E-Print Network [OSTI]

    Allan, Richard P.

    radiative energy balance between net incoming solar radiation and outgoing longwave radiation (OLR in the model surface temperature, surface emissivity, or atmospheric transmission. By building up a physical clear-sky regions. In section 4, we describe the radiation code and vertical profiles of temperature

  12. Use of neural networks in the capacitance imaging system. Technical note

    SciTech Connect (OSTI)

    Fasching, G.E.; Loudin, W.J.; Paton, D.E.; Smith, N.S. Jr.

    1993-10-01T23:59:59.000Z

    The US Department of Energy`s Morgantown Energy Technology Center (METC) has developed a capacitance imaging system (CIS) to support its fluidized-bed research programs. The CIS uses 400 electric displacement current measurements taken between combinations of pairs of 32 electrodes to obtain a measure of the fluidized-bed material density in the volume between the electrodes. The measurements are simultaneously made for three other sets of horizontally-oriented 32 electrodes with the four sets evenly spaced vertically. This report describes the development of a method of using the 400 current measurements per level as the input to a neural network to produce the 193-pixel density estimates defined for each level. A 417-neuron subnetwork using 4,047 weights is defined as the system used to determine a set of 32-pixel densities in one of the annular regions of the fluidized-bed cross section. The same subnetwork with different values of weights is used for the other five annular regions that cover the rest of the cross section. An averaging technique is used to determine the density of the small central region. The methods used to optimize the set of weights for each of the six subnetworks are described. The results of tests using calibration electric current data as inputs to the neural system showed that these density estimates have less error than three previously developed methods of converting current measurements into pixel density maps. A comparison of the density maps produced by the neural system and the alternate three methods using input fluidization data also indicates the superior performance of the neural network approach.

  13. Environmental effects of dredging. Lower limits of organic carbon normalization: Results of fish/sediment/water equilibrium partitioning studies. Technical note

    SciTech Connect (OSTI)

    McFarland, V.A.; Honeycutt, M.E.; Feldhaus, J.; Ace, L.N.; Brannon, J.M.

    1996-03-01T23:59:59.000Z

    This technical note reports the initial results of studies measuring biota/ sediment/water equilibrium partitioning of a polychlorinated biphenyl (PCB) congener. The focus of this technical note is on the validity of normalizing concentrations of neutral organic chemicals on sediment total organic carbon (TOC) when sediment TOC concentrations are low. Over the past 10 years, the U.S. Environmental Protection Agency (EPA) has aggressively pursued development of single-chemical sediment quality criteria (SQC). Equilibrium partitioning of neutral organic chemicals between the organic carbon fraction of bedded sediments and the interstitial water of the sediments provides the theoretical basis for the most popular approach to development of SQC. The solution phase of the chemical in equilibrium with the sediment is considered to represent the bioavailable fraction and to enable the conversion of existing water quality criteria (WQC) into SQC or sediment quality standards.

  14. Environmental effects of dredging. Documentation of the settle module for ADDAMS: Design of confined disposal facilities for solids retention and initial storage. Technical notes

    SciTech Connect (OSTI)

    Hayes, D.F.; Schroeder, P.R.

    1992-12-01T23:59:59.000Z

    This technical note documents the SETTLE computer program which facilitates the design of a confined disposal facility (CDF) to retain solids, provide initial storage, and meet effluent discharge limitations for suspended solids during a dredged matenal disposal operation. Detailed information can be found in Engineer Manual 1110-2-5027, Confined Dredged Material Disposal. SETTLE is a part of the Automated Dredging and Disposal Alternatives Management System (ADDAMS).

  15. Environmental effects of dredging. Corps of Engineers` procedures and policies on dredging and dredged material disposal (the federal standard). Technical note

    SciTech Connect (OSTI)

    Engler, R.M.; Wright, T.; Lee, C.R.; Dillon, T.M.

    1988-08-01T23:59:59.000Z

    This note describes the Federal Standard pursuant to Corps` technical considerations and policies with regard to the disposal of dredged material in accordance with the Clean Water Act (CWA), which provides for selecting the least costly dredged or fill material disposal alternative consistent with sound engineering practices and appropriate environmental quality standards. This approach also generally applies to assessments conducted in accordance with the Ocean Dumping Act, even though the discussion centers on the CWA.

  16. Technical Notes Differential Interferometric

    E-Print Network [OSTI]

    Yang, Eui-Hyeok

    relevant to hypervelocity boundary layer transition on cold-wall slender bodies. With the ability to ground of the fluid is emphasized. The most unstable mode on a cold-wall slender body at zero angle of incidence location in high- speed boundary layers is critical to hypersonic vehicle design because of the weight

  17. Environmental effects of dredging. Long-term evaluation of plants and animals colonizing contaminated estuarine dredged material placed in a wetland environment. Technical note

    SciTech Connect (OSTI)

    Lee, C.R.; Brandon, D.L.; Engler, R.M.

    1991-09-01T23:59:59.000Z

    This technical note summarizes data collected between 1983 and 1989 that relate to plant and animal communities colonizing the wetland creation site of the US Army Corps of Engineers/Environmental Protection Agency Field Verification Program (FVP). The management of contaminated dredged material and the mobility of contaminants from the dredged material into plants and animals are also described and related to the evaluation of test results by Lee and others (1991). This site will be evaluated through September 1995 under the Long-Term Effects of Dredging (LEDO) Program.

  18. Record Management Talking Notes Welcome to the Records Management portion of your online orientation. In this section you will

    E-Print Network [OSTI]

    Weston, Ken

    records Your new responsibilities, as an FSU employee, for protecting and maintaining public documents How to properly destroy a public document Where to find records management resources Slide 2 To successfullyRecord Management Talking Notes Slide 1 Welcome to the Records Management portion of your online

  19. Environmental effects of dredging. Long-term evaluation of plants and animals colonizing contaminated esturaine dredged material placed in an upland environment. Technical notes

    SciTech Connect (OSTI)

    Lee, C.R.; Brandon, D.L.

    1991-09-01T23:59:59.000Z

    Contaminated sediment was dredged from Black Rock Harbor, Connecticut, in October 1983 and placed in aquatic, upland, and wetland environments as part of the US Army Corps of Engineers/Environmental Protection Agency Field Verification Program (FVP), 1981-1986 (Peddicord 1988). Upland tests (plant and earthworm bioassays) were conducted on the sediment before dredging to evaluate potential contaminant mobility under the upland disposal alternative. Laboratory test results were subsequently field verified at the field test site at `Tongue Point,` Bridgeport, Connecticut. The results of the upland disposal portion of the FVP and the changes occurring since the completion of the FVP for the upland disposal environment are summarized herein. This technical note emphasizes the contaminant mobility of heavy metals. Contaminant mobility and the progressive development of the upland ecosystem at this site will be evaluated until September 1995.

  20. Environmental effects of dredging: Construction of a shallow-water gravel bar habitat using dredged material. Technical notes

    SciTech Connect (OSTI)

    Miller, A.C.; Engler, R.M.

    1988-03-01T23:59:59.000Z

    The objecive of this program is to develop the material product forms. processes,and equipment for automated fabrication of low cost composite submarine structures. These developments will be demonstrated through the fabrication and delivery of man rated demonstration article components, including spheres and cylinders with integral domes. This report is the Seventeenth Interim Technical Report for this program. It represents results of progress in: (1) Fabrication and assembly of the Deliverable Cylinder; (2) Characteriztion of as-fabricated material property specimens; (3) Procurement of a dual use fiber placement machine; (4) Quality evaluation of deliverable; (5) Analysis of subcomponents; (6) Process monitoring techniques; and (7) Technology transfer.

  1. ELECTRICAL ENGINEERING Curriculum Notes

    E-Print Network [OSTI]

    Mather, Patrick T.

    ELECTRICAL ENGINEERING Curriculum Notes 2013-2014 1. Electrical Engineering (EE) students must/programs/electrical_engineering) and minors are used to regulate technical electives. A student must complete four technical elective courses in Electrical Engineering or Computer Engineering. At a minimum

  2. Fuel Cell Technologies Program Multi-Year Research, Development and Demonstration (MYRDD) Plan - Section 3.0: Technical Plan

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdf Flash2006-52.pdf0.pdfDepartment ofEnergy 3 Fuel Cell2| Department ofA -Page 3 -

  3. Experiment 949 Technical Note # NNN

    E-Print Network [OSTI]

    bundles) meters of fibers together in common PVC tube, and 1 to 2.5 meters of fibers separated individually in individual PVC tubing. Joint between common PVC tube and individual fibers is protected protection black PVC tubing was used: ffl Alpha Wire PVC­105­4 with ID = 5.28 mm for common mini­b

  4. Technical Note Engineering Stratigraphic Columns

    E-Print Network [OSTI]

    reference standard stratigraphic columns. EXAMPLES OF PREVIOUS WORK Standard stratigraphic columns typically, color, and sedimentary structures. Standard columns emphasize vertical changes in the rock sequence and ignore soil units. Very little work has been done on the use of strati- graphic columns to portray

  5. TECHNICAL NOTE M. Alfano,1

    E-Print Network [OSTI]

    Paulino, Glaucio H.

    in Aluminum Joints Bonded with a Bi-Component Epoxy Adhesive ABSTRACT: Adhesive bonding is a viable belonging to electronic, automotive, and aerospace industries. However, adhesive joints often contain flaws properties. In the present paper, the candidate mode I fracture toughness of aluminum/epoxy joints

  6. Computer Engineering Curriculum Notes

    E-Print Network [OSTI]

    Mather, Patrick T.

    1 Computer Engineering Curriculum Notes 2013-2014 Technical Electives Students fulfill 15 credits be assigned to either group A or group B as determined by Computer Engineering program committee. Every year the computer engineering program committee will review the list and may make change(s). Group A (at least 6

  7. ARDB Technical Note 133 -Draft 11/2/97 E 1 5 7 Dynamics in the Plasma Chamber for E157

    E-Print Network [OSTI]

    , in the magnetically self-focused regime (overdense plasma), as appropriate for the beam head in E157. Optics for portions of the beam in the ion-focused regime (underdense plasma) have been noted by Assmann, et al.,3 Conference (IEEE, New York, to be published). 2 D. H. Whittum, "Continuous plasma final focus", in Nonlinear

  8. Technical Report TR-011 March 2000 Research Section, Vancouver Forest Region, BCMOF Research Disciplines: Ecology ~ Geology ~ Geomorphology ~ Hydrology ~ Pedology ~ Silviculture ~ Wildlife

    E-Print Network [OSTI]

    Disciplines: Ecology ~ Geology ~ Geomorphology ~ Hydrology ~ Pedology ~ Silviculture ~ Wildlife TR-011 Disciplines: Ecology ~ Geology ~ Geomorphology ~ Hydrology ~ Pedology ~ Silviculture ~ Wildlife #12;Technical ~ Geology ~ Geomorphology ~ Hydrology ~ Pedology ~ Silviculture ~ Wildlife Page Summary

  9. Environmental effects of dredging. Corps of Engineers initiative to develop long-term management strategies for navigation dredging projects: Overview and framework. Technical notes

    SciTech Connect (OSTI)

    Francingues, N.R.; Mathis, D.B.

    1990-01-01T23:59:59.000Z

    This note describes a major US Army Corps of Engineers (USACE) policy initiative to define an appropriate and effective framework for developing and implementing the concept of a Long-Term Management Strategy (LTMS) within the national navigation dredging program. It presents a five-phase conceptual approach or framework for developing an LTMS with emphasis on lessons learned and a summary of selected field experiences.

  10. Lecture notes for criticality safety

    SciTech Connect (OSTI)

    Fullwood, R.

    1992-03-01T23:59:59.000Z

    These lecture notes for criticality safety are prepared for the training of Department of Energy supervisory, project management, and administrative staff. Technical training and basic mathematics are assumed. The notes are designed for a two-day course, taught by two lecturers. Video tapes may be used at the options of the instructors. The notes provide all the materials that are necessary but outside reading will assist in the fullest understanding. The course begins with a nuclear physics overview. The reader is led from the macroscopic world into the microscopic world of atoms and the elementary particles that constitute atoms. The particles, their masses and sizes and properties associated with radioactive decay and fission are introduced along with Einstein's mass-energy equivalence. Radioactive decay, nuclear reactions, radiation penetration, shielding and health-effects are discussed to understand protection in case of a criticality accident. Fission, the fission products, particles and energy released are presented to appreciate the dangers of criticality. Nuclear cross sections are introduced to understand the effectiveness of slow neutrons to produce fission. Chain reactors are presented as an economy; effective use of the neutrons from fission leads to more fission resulting in a power reactor or a criticality excursion. The six-factor formula is presented for managing the neutron budget. This leads to concepts of material and geometric buckling which are used in simple calculations to assure safety from criticality. Experimental measurements and computer code calculations of criticality are discussed. To emphasize the reality, historical criticality accidents are presented in a table with major ones discussed to provide lessons-learned. Finally, standards, NRC guides and regulations, and DOE orders relating to criticality protection are presented.

  11. Technical Brief

    E-Print Network [OSTI]

    Depleted Uranium; Brian Littleton

    2006-01-01T23:59:59.000Z

    ii iiiFOREWARD The Depleted Uranium Technical Brief is designed to convey available information and knowledge about depleted uranium to EPA Remedial Project Managers, On-Scene Coordinators, contractors, and other Agency managers involved with the remediation of sites contaminated with this material. It addresses relative questions regarding the chemical and radiological health concerns involved with depleted uranium in the environment. This technical brief was developed to address the common misconception that depleted uranium represents only a radiological health hazard. It provides accepted data and references to additional sources for both the radiological and chemical characteristics, health risk as well as references for both the monitoring and measurement and applicable treatment techniques for depleted uranium. Please Note: This document has been changed from the original publication dated

  12. Technical Report TR-012 March 2001 Research Section, Vancouver Forest Region, BCMOF Research Disciplines: Ecology ~ Geology ~ Geomorphology ~ Hydrology ~ Pedology ~ Silviculture ~ Wildlife

    E-Print Network [OSTI]

    Disciplines: Ecology ~ Geology ~ Geomorphology ~ Hydrology ~ Pedology ~ Silviculture ~ Wildlife TR-012: Ecology ~ Geology ~ Geomorphology ~ Hydrology ~ Pedology ~ Silviculture ~ Wildlife #12;Technical Report TR ~ Geology ~ Geomorphology ~ Hydrology ~ Pedology ~ Silviculture ~ Wildlife Page Summary 2 Keywords 2

  13. Environmental effects of dredging: Residue effects data base on the relationship between dioxin and biological effects in aquatic animals. Technical note

    SciTech Connect (OSTI)

    Gibson, A.; Reilly, F.J.

    1992-02-01T23:59:59.000Z

    The purpose of this note is to present residue-effects data involving dioxins that are presented in the scientific literature. The information will be useful in developing regulatory guidance applicable to dioxin contamination. Work Unit 31771, `Environmental Interpretation of Consequences from Bioaccumulation,` of the Long-Term Effects of Dredging Operations (LEDO) Program is designed to provide interpretive guidance for evaluating data generated by Corps field offices for their permit applicants. This guidance results from identifying residue-effects relationships through laboratory experiments and literature reviews. Previous literature reviews conducted under this work unit have concentrated on heavy metals and chlorinated contaminants (Dillon 1984, Dillon and Gibson 1985). The present effort examines residue-effects relationships with dioxins as reported in the published literature.

  14. Blue Note

    ScienceCinema (OSTI)

    Murray Gibson

    2010-01-08T23:59:59.000Z

    Argonne's Murray Gibson is a physicist whose life's work includes finding patterns among atoms. The love of distinguishing patterns also drives Gibson as a musician and Blues enthusiast."Blue" notes are very harmonic notes that are missing from the equal temperament scale.The techniques of piano blues and jazz represent the melding of African and Western music into something totally new and exciting.

  15. Blue Note

    SciTech Connect (OSTI)

    Murray Gibson

    2007-04-27T23:59:59.000Z

    Argonne's Murray Gibson is a physicist whose life's work includes finding patterns among atoms. The love of distinguishing patterns also drives Gibson as a musician and Blues enthusiast."Blue" notes are very harmonic notes that are missing from the equal temperament scale.The techniques of piano blues and jazz represent the melding of African and Western music into something totally new and exciting.

  16. Technical Note / Note technique The advanced scatterometer (ASCAT) on the

    E-Print Network [OSTI]

    Stoffelen, Ad

    operational (MetOp) platform: A follow on for European wind scatterometers J. Figa-Saldaña, J.J.W. Wilson, E the European remote sensing (ERS) satellites have proven their usefulness for weather analyses and forecasting scatterometer (ASCAT) on board the meteorological operational (MetOp) platforms is the follow on for European

  17. Section Notes 6 Integer Programming I

    E-Print Network [OSTI]

    Chen, Yiling

    Investment Solar Differential Inc. is starting up a business in manufacturing photovoltaic panels, and wants, will produce an annual profit of f and will cost f to construct. Please provide Solar Differential with an IP Linear Objectives 8 6.1 Solar Differential, continued

  18. Section Notes 7 Integer Programming I

    E-Print Network [OSTI]

    Chen, Yiling

    Capital Investment Solar Differential Inc. is starting up a business in manufacturing photovoltaic panels, will produce an annual profit of f and will cost f to construct. Please provide Solar Differential with a IP Linear Objectives 8 6.1 Solar Differential, continued

  19. Section Notes 5 Review of Linear Programming

    E-Print Network [OSTI]

    Chen, Yiling

    3 Lecture 4: Convexity, Extreme points 3 4 Lecture 5: Primal Simplex 4 5 Lecture 6: Advanced Primal (LP) is an optimization problem that involves maximizing or minimizing a linear objective function, ..., Am form a square matrix that is invertible · Span ­ These vectors A1, ..., Am span the vector space

  20. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    differenziali sono state fatte considerando un asse per volta, cioè impiegando due canali della scheda, grazie riferimento scelto per la descrizione degli spostamenti è rappresentato in Figura 1, dove l'asse z è

  1. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    -5 MISURA QUADRUPOLO ASTER #2 CON SISTEMA DANFYSIK RICERCA DELL'ASSE MAGNETICO B. Bolli, F. Iungo, C. Sanelli, M. Sardone Nel seguito si riportano i risultati relativi alla misura dell'asse magnetico del. #12;MM-5 pg. 3 FIG. 1 #12;MM-5 pg. 4 Le misure per l'individuazione dell'asse magnetico vanno

  2. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    asse coincidente con quello di un laser, solidale alla macchina, e da un altro appartenente al piano verticale passante per il primo. La messa a punto della macchina è tale che l'asse del laser e quello della allineamento magnetico finale, viene misurato e quindi mosso in modo da portare il suo centro magnetico sull'asse

  3. Technical Note Methane gas migration through geomembranes

    E-Print Network [OSTI]

    coefficient of PVC, LLDPE, and HDPE geomembranes by performing the standard gas transport test (ASTM D1434). The measured methane gas permeability coefficient through a PVC geomembrane is 7.55 3 104 ml(STP).mil/m2.day thicknesses is proposed using the measured permeability coefficients for PVC, LLDPE, and HDPE geomembranes

  4. Technical Note: Statistical methods for accuracy assesment

    E-Print Network [OSTI]

    Rossiter, D G "David"

    where ground truth will be determined; 2. the response design: how to determine the ground truth and ground has been determined by a suitable response design. There is nothing particularly novel

  5. TECHNICAL NOTE FISH PROTEINS AS BINDERS

    E-Print Network [OSTI]

    products . Recently in th meat and poultry industry, there has been interest in binding tog th r pieces and storage at temperatures above freezing . The following describes some of the re- search on the use of fish various flavoring agents such as ocean quahogs, ,Iaine shrimp, and crab meat. All these were highly

  6. BNL/SNS TECHNICAL NOTE M. Kesselman

    E-Print Network [OSTI]

    , indicate the possibility of producing a low droop current transformer ( appropriately for the SNS Ring. A compromise between droop, rise time and transient response may be necessary. 2 will use both FCTs and low droop BCMs to examine bunch characteristics as well as over-all current

  7. BNL/SNS TECHNICAL NOTE M. Kesselman

    E-Print Network [OSTI]

    to balance sensitivity for the lower currents and droop for the longer duration macro-pulse. It is felt that droop could be compensated using digital compensation techniques justifying this approach

  8. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    suitable material for the DANE vacuum chamber theoretical and experimental results on some aluminum alloys and mechanical characteristics are considered aluminum and aluminum alloys are preferable materials for ultrahigh - Properties of commercial grade aluminum alloy and stainless steel [2] Aluminum Stainless Commercial grade

  9. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    collegate due pompe a turbina agli attacchi presenti agli estremi della TL. Dopo un pompaggio di 10 giorni

  10. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    of pumps could be added. DISTRIBUTED ION PUMPS Along the vacuum chamber of the sector we are considering and information about the storage ring vacuum chamber components (pumps, valves, gauges, and so on), GAS chamber sector composed by two bending magnets and one wiggler, we have: - 1021 phot/sec per sector

  11. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    emittances is discussed. This method allows also the evaluation of the beam optical functions (Twiss - The 'scanning quad' method 1.1 General description The emittance and the Twiss parameters values are derived and analyzed in order to derive emittance and Twiss parameters. In § 1.3 it will be described how this analysis

  12. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    ) This is the matrix that in MAD is denoted as R matrix in the output of the command TWISS when the COUPLE option , , , , = = - + = = + + 11 2 12 11 12 2 22 2 12 22 12 2 2 2 (16) ( a b a b a b, , ,, , are the Twiss parameters of the two

  13. Texas Nitrogen Leaching Index TECHNICAL NOTES

    E-Print Network [OSTI]

    Mukhtar, Saqib

    Potential A Deep, well-drained to excessively drained sands and gravels. High High Low B Moderately deep to deep, well to moderately well drained, moderately fine to moderately course texture. Moderate Moderate in the NRCS Soil Data Mart and Web Soil Survey (WSS) by generating the "Water Features Report". Under

  14. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    - razione delle varie macchine e per la protezione di eventuali valvole da vuoto. Si propone quindi come

  15. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    of possible high power loss. Another potential danger is creation of dust particles between the sliding of the coupling of the power spectrum lines to the HOMs is not negligible. The power loss in case of the full coupling can be of the order of some thousand watts. In order to estimate the possible power loss we can

  16. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    compounds), a large reduction of these peaks will indicate the end of the treatement. e) A Nitrogen glow will be vented with slight positive dry Nitrogen and sealed until ready to be installed. 2) Vacuum Group has safety problems). We have to study the best solution for our system. 6) Titanium ion pumps. Star-Cell ion

  17. ANE TECHNICAL NOTE NFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    ADAPTATION OF THE DANE LONGITUDINAL KICKER GEOMETRY TO THE NEEDS OF THE BESSY II SYNCHROTRON LIGHT SOURCE A. Gallo, T. Knuth(*), F. Marcellini, B. Spataro, M. Zobov (*) BESSY II, Rodower Chaussee 5, Berlin modes. Recently, the group of BESSY II, the new Berlin synchrotron light source whose construction

  18. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    LATTICE UPDATE M.E. Biagini, S. Guiducci, M.R. Masullo, G. Vignola 1. INTRODUCTION An improved version are of a different type: the first one nearer to the IP is a sector type dipole, while the second is a rectangular 2.III - DANE single ring parameters list Energy (MeV) 510 Circumference (m) 97.69 Dipole bending

  19. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    ) feedback effect 3) beam-cavity interaction. In Fig.1 we show a simplified flow chart of the code. The input. 1 - Flow chart. 2.1 Propagation around the ring The quantities necessary to describe the motion of a single bunch in the machine, are the energy deviation E with respect to the nominal energy Eo

  20. Technical Notes Compressive Sensing and Reconstruction

    E-Print Network [OSTI]

    Huang, Xun

    . Introduction COMPRESSIVE sensing is a newly emerging signal-processing method [1,2] in information technologies. If some prior knowledge, such as an inherent model of the fluid process of interest, can be incorporated noise by interaction of fan and stator assembly [5,12]. This tonal frequency sound propagates through

  1. BNL/SNS TECHNICAL NOTE P. Thieberger

    E-Print Network [OSTI]

    ], and the proposed Spallation Neutron Source (SNS) [4]. In view of the excellent vacuum and large vacuum chambers used, for example, to avoid false readings in Faraday cups used to measure ion beam intensities, either alone or in conjunction with inclined fields, to reduce acceleration tube vacuum breakdowns caused

  2. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    of a synchrotron radiation device, because the solenoidal field at the IP is longitudinal. An electrostatic system-3 A LUMINOSITY MONITOR FOR DANE M. Preger 1. Introduction A fast and precise luminosity monitor, based on the direct measurement of an electromagnetic reaction, is one of the possible tools for real

  3. TECHNICAL BASIS AND APPLICATION OF NEW RULES ON FRACTURE CONTROL OF HIGH PRESSURE HYDROGEN VESSEL IN ASME SECTION VIII, DIVISION 3 CODE

    SciTech Connect (OSTI)

    Rawls, G

    2007-04-30T23:59:59.000Z

    As a part of an ongoing activity to develop ASME Code rules for the hydrogen infrastructure, the ASME Boiler and Pressure Vessel Code Committee approved new fracture control rules for Section VIII, Division 3 vessels in 2006. These rules have been incorporated into new Article KD-10 in Division 3. The new rules require determining fatigue crack growth rate and fracture resistance properties of materials in high pressure hydrogen gas. Test methods have been specified to measure these fracture properties, which are required to be used in establishing the vessel fatigue life. An example has been given to demonstrate the application of these new rules.

  4. Technical approach document

    SciTech Connect (OSTI)

    Not Available

    1989-12-01T23:59:59.000Z

    The Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, Public Law 95-604 (PL95-604), grants the Secretary of Energy the authority and responsibility to perform such actions as are necessary to minimize radiation health hazards and other environmental hazards caused by inactive uranium mill sites. This Technical Approach Document (TAD) describes the general technical approaches and design criteria adopted by the US Department of Energy (DOE) in order to implement remedial action plans (RAPS) and final designs that comply with EPA standards. It does not address the technical approaches necessary for aquifer restoration at processing sites; a guidance document, currently in preparation, will describe aquifer restoration concerns and technical protocols. This document is a second revision to the original document issued in May 1986; the revision has been made in response to changes to the groundwater standards of 40 CFR 192, Subparts A--C, proposed by EPA as draft standards. New sections were added to define the design approaches and designs necessary to comply with the groundwater standards. These new sections are in addition to changes made throughout the document to reflect current procedures, especially in cover design, water resources protection, and alternate site selection; only minor revisions were made to some of the sections. Sections 3.0 is a new section defining the approach taken in the design of disposal cells; Section 4.0 has been revised to include design of vegetated covers; Section 8.0 discusses design approaches necessary for compliance with the groundwater standards; and Section 9.0 is a new section dealing with nonradiological hazardous constituents. 203 refs., 18 figs., 26 tabs.

  5. Mechanical Engineering Department Technical Review

    SciTech Connect (OSTI)

    Carr, R.B.; Denney, R.M. (eds.)

    1981-07-01T23:59:59.000Z

    The Mechanical Engineering Department Technical Review is published to inform readers of various technical activities within the Department, promote exchange of ideas, and give credit to personnel who are achieving the results. The report is presented in two parts: technical achievements and publication abstracts. The first is divided into seven sections, each of which reports on an engineering division and its specific activities related to nuclear tests, nuclear explosives, weapons, energy systems, engineering sciences, magnetic fusion, and materials fabrication.

  6. Mechanical engineering department technical review

    SciTech Connect (OSTI)

    Carr, R.B. Denney, R.M. (eds.)

    1981-01-01T23:59:59.000Z

    The Mechanical Engineering Department Technical Review is published to: (1) inform the readers of various technical activities within the department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical acievements and publication abstracts. The first is divided into eight sections, one for each division in the department providing the reader with the names of the personnel and the division accomplishing the work.

  7. OTS NOTE

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling7 AugustAFRICAN .METALS~ c3 Alexander941 OTS NOTE

  8. Extension Note Research Disciplines: Ecology ~ Geology ~ Geomorphology ~ Hydrology ~ Pedology ~ Silviculture ~

    E-Print Network [OSTI]

    Extension Note Research Disciplines: Ecology ~ Geology ~ Geomorphology ~ Hydrology ~ Pedology,Tsitika Watershed.Research Section,CoastForest Region,BCMOF, Nanaimo, BC. Extension Note EN-021. EN-021 Hydrology ~ Geomorphology ~ Hydrology ~ Pedology ~ Silviculture ~ Wildlife Extension Note EN-021 March 2006 Forest Research

  9. Technical Guidance

    Broader source: Energy.gov [DOE]

    The Office of Technical Guidance, within the Office of Health, Safety and Security develops and issues Government-wide and Department-wide technical guidance to ensure that classified nuclear...

  10. 203-HJT-0611 UNLESS OTHERWISE NOTED

    E-Print Network [OSTI]

    McDonald, Kirk

    WELDS SHALL BE WITH ASME SECTION IX. NO CODE STAMP REQUIRED. 1. WELDING SHALL BE PERFORMED IN ACCORDANCE DIMENSIONS AND TOLERANCES PER ASME Y14.5M 3. MACHINED FINISH 125 MICRO- INCHES RMS 4. CONCENTRICITY .010 TIR.850 2.4 .9 2.850 .900 .975 1.20 NOTES 1. WELDING SHALL BE PERFORMED IN ACCORDANCE WITH ASME SECTION IX

  11. UNLESS OTHERWISE NOTED 203-HJT-0611

    E-Print Network [OSTI]

    McDonald, Kirk

    WITH ASME SECTION IX. NO CODE STAMP REQUIRED. 2. NO RADIOGRAPHY REQUIRED. ALL WELDS SHALL BE DYE PENETRANT.349 NOTES 1. WELDING SHALL BE PERFORMED IN ACCORDANCE WITH ASME SECTION IX. NO CODE STAMP REQUIRED. 2 AND TOLERANCES PER ASME Y14.5M 3. MACHINED FINISH 125 MICRO- INCHES RMS 4. CONCENTRICITY .010 TIR 5. MACHINED

  12. FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

    SciTech Connect (OSTI)

    KRIPPS, L.J.

    2003-10-09T23:59:59.000Z

    This technical basis document was developed to support of the Tank Farms Documented Safety Analysis (DSA) and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSC and/or TSR-level controls.

  13. 2013 Geothermal Technologies Office Peer Review Technical Report

    Broader source: Energy.gov [DOE]

    Provided in three sections, this comprehensive technical report assesses 100 projects in the GTO portfolio, based on presentations from GTO-funded principal investigators that were evaluated and...

  14. SECTION B

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FY2015 is 200,000. SECTION V - PERFORMANCE REQUIREMENTS DEFINE COMPLETION: Specify Performance Elements and describe indicators of success (qualityprogress). Include...

  15. Section B

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    121 B-i PART I - THE SCHEDULE SECTION B - SUPPLIES OR SERVICES AND PRICESCOSTS TABLE OF CONTENTS B.1 TYPE OF CONTRACT - ITEMS BEING ACQUIRED ......

  16. SECTION E

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - E8 - Electrical load list panel schedules - E9 - Details sections - EC - 480V motor control center schedules - Setroute report identifying released cables and raceway WTP...

  17. Organic solvent technical basis document

    SciTech Connect (OSTI)

    SANDGREN, K.R.

    2003-03-22T23:59:59.000Z

    This technical basis document was developed to support the Tank Farms Documented Safety Analysis (DSA), and describes the risk binning process and the technical basis for assigning risk bins for the organic solvent fire representative and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous conditions based on an evaluation of the frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR-level controls. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses, as described in this report.

  18. VOL2NOTE.CHP:Corel VENTURA

    Gasoline and Diesel Fuel Update (EIA)

    Tables * Note 4. Domestic Crude Oil Production * Note 5. Export Data * Note 6. Quality Control and Data Revision * Note 7. Frames Maintenance * Note 8. Descriptive Monthly...

  19. TR-017 Ecology March 2002 Technical Report

    E-Print Network [OSTI]

    TR-017 Ecology March 2002 Technical Report Forest Research Vancouver Forest Region 2100 Labieux Region Coarse Woody Debris Working Group Research Disciplines: Ecology ~ Geology ~ Geomorphology Research Section, Vancouver Forest Region, BCMOF Research Disciplines: Ecology ~ Geology ~ Geomorphology

  20. Page 1 of 1 2013/2014 TECHNICAL ELECTIVES: ENOG

    E-Print Network [OSTI]

    Calgary, University of

    th or 5th year standing in SSE ENCH 503 Crude Oil Upgrading & Refining CHEM 409 and ENCH 421Page 1 of 1 2013/2014 TECHNICAL ELECTIVES: ENOG Oil and Gas Engineering Approved Technical-REQUISITES noted as: "CO-REQ" FALL ENEE 501 Pollution Prevention & Control for Energy Industry 3rd, 4th or 5th year

  1. FAR SIDE ONLY SECTION A-A

    E-Print Network [OSTI]

    McDonald, Kirk

    NOTES 1. WELDING SHALL BE PERFORMED IN ACCORDANCE WITH ASME SECTION IX. NO CODE STAMP REQUIRED. 2. ALL is property of 1. ALL DIMENSIONS ARE IN INCHES 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M 3 REQUIRED. NO RADIOGRAPHY REQUIRED. 2. ALL WELDS SHALL BE DYE PENETRANT INSPECTED. WITH ASME SECTION IX

  2. Extension Note Research Disciplines: Ecology ~ Geology ~ Geomorphology ~ Hydrology ~ Pedology ~ Silviculture ~

    E-Print Network [OSTI]

    Extension Note Research Disciplines: Ecology ~ Geology ~ Geomorphology ~ Hydrology ~ Pedology Hudson and Axel Anderson KEYWORDS: Water management, Coastal watersheds, hydrological modeling CITATIONPractice. ResearchSection,Coast ForestRegion, BCMOF,Nanaimo, BC. Extension Note EN-022. EN-022 Hydrology March 2006

  3. UNLESS OTHERWISE NOTED 203-HJT-0620A

    E-Print Network [OSTI]

    McDonald, Kirk

    .928 2.298 NOTES 1. WELDING AND INSPECTION SHALL BE PERFORMED IN ACCORDANCE WITH ASME SECTION IX. NO CODE ASME Y14.5M 3. MACHINED FINISH 125 MICRO- INCHES RMS 4. CONCENTRICITY .010 TIR 5. MACHINED ANGLES 1 INSPECTION REQUIRED. 2. NUMBER OF PIPE BUTT WELDS SHOULD BE MINIMIZED. NO CODE STAMP REQUIRED. IN ACCORDANCE

  4. Invite Paper Fall Technical Meeting

    E-Print Network [OSTI]

    Gomez, Alessandro

    within which it is sensible to make predictions, combustion is here to stay. In addition to oil1 Invite Paper Fall Technical Meeting of the Eastern States Section of the Combustion Institute: A Laboratory-Scale Benchmark for Turbulent Combustion Studies Alessandro Gomez Department of Mechanical

  5. Industrial Energy Efficiency Technical Review Guidelines and Best Practices 

    E-Print Network [OSTI]

    Dalziel, N.

    2013-01-01T23:59:59.000Z

    the highest net- to-gross ratio, of programs researched, by a significant margin, at 91%. o Approximately 30% and 65% higher than Focus on Energy and PG&E results, respectively. Per note above, CPUC results do not include spillover. ? CPUC Impact.... Presentation of a technical review standard to align ex-ante accuracy with the appropriate review rigor. The following technical review approach and framework is intended for pro-active involvement of program technical resources, as per the conclusions...

  6. Modular Radioisotope Thermoelectric Generator (RTG) Program. Final technical report

    SciTech Connect (OSTI)

    Not Available

    1992-12-31T23:59:59.000Z

    Section 2.0 of this report summarizes the MOD-RTG reference flight design, and Section 3.0 discusses the Ground Demonstration System design. Multicouple technology development is discussed in Section 4.0, and Section 5.0 lists all published technical papers prepared during the course of the contract.

  7. Section J

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideo »UsageSecretary of Energy Advisory Board FollowSection 3161L-1 Section J

  8. Section J

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideo »UsageSecretary of Energy Advisory Board FollowSection 3161L-1 Section JM-1

  9. Section Number:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideo »UsageSecretary of Energy Advisory Board FollowSection 3161L-1 SectionIVV

  10. BRIEFING NOTES November 2010

    E-Print Network [OSTI]

    Mound, Jon

    and EU, have promoted biofuel advancement which has #12;Briefing Note. November 2010. SustainableBRIEFING NOTES November 2010 Sustainable biofuels in Africa: cultivation of Jatropha curcas in Mali Background Case study 1 - Mali Case study 2 - Malawi Policy recommendations Biofuel cultivation worldwide

  11. Technical Assistance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMayDepartment ofEnergyTeam Cumberland » TeamTechnical Assistance

  12. Approved Test Procedures Version 1.1 Release Notes

    E-Print Network [OSTI]

    Approved Test Procedures Version 1.1 Release Notes 1 Change Reason for Change 302.a drugdrug, drug allergy In the Informative Test Description section Added clarification to the example. 302.c Problem List In the Informative Test Description section Added the sentence "The test also

  13. Technical basis document for natural event hazards

    SciTech Connect (OSTI)

    CARSON, D.M.

    2003-08-28T23:59:59.000Z

    This technical basis document was developed to support the documented safety analysis (DSA) and describes the risk binning process and the technical basis for assigning risk bins for natural event hazard (NEH)-initiated accidents. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous conditions based on an evaluation of the frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR-level controls This report documents the technical basis for assigning risk bins for Natural Event Hazards Representative Accident and associated represented hazardous conditions.

  14. Technical information

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40Coal StocksProvedFeet)ThousandNumber andCrude StreamCrudeTechnical

  15. Technical Sessions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our InstagramStructureProposedPAGESafety Tag:8,, 20153 To synchronizeTechnical

  16. Naval Petroleum Reserve No. 2: Buena Vista Oil and Gas Field, Kern County, California: Proved reserves, Developed and undeveloped, Sections 6 and 8: Development history and exploitation techniques, Effective July 1, 1987: (Final technical report)

    SciTech Connect (OSTI)

    Carey, K.B.

    1987-09-09T23:59:59.000Z

    The research for the initial Naval Petroleum Reserve No. 2 (NPR-2), study Task Assignment 010, showed the possibility of undeveloped proved reserves in the Shallow Pool on Government leases. Task Assignment 010C included a study to confirm or disprove the possibility. The six-section area, which is highlighted on Exhibit M-2, was chosen as the area for specific study of this subject. The Shallow Oil Zone, as depicted on Exhibit S-1, was the focal point of the study in the area. Competitive development of Government land with adjacent privately held land is an issue which has often been raised regarding NPR-2; however, it has never been formally addressed. Task Assignment 010C commissioned a study of the subject in the same six-section area designated for the study of proved undeveloped reserves. The producing formations in the Buena Vista Field of NPR-2 are very similar to the producing formations in the Elk Hills Field of NPR-1 to the north. It is possible that some of the successful development techniques utilized in NPR-2 by the various operators might enhance production efficiency at NPR-1. Task Assignment 010C included a detailed task of researching techniques used in NPR-2 for possible application in NPR-1. Because the detailed tasks of Task Assignment 010C are divergent in scope, a composite summary of the study's research is not included in this report. Each task's research is detailed in a separate Discussion section. Exhibits for these discussions are contained in an Exhibit section at the end of this volume. The appendices include: task assignment; DOE letters to lessees; Evans, Carey and Crozier letters to lessees; reports and studies from lessees; core analysis data; production data; geologic picks of formation tops; and annotated well logs. 22 figs., 6 tabs.

  17. SECTION J

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin ofEnergy at Waste-to-EnergySEAB_Minutes_1_20_11.pdfSEB SecretariatJ-1 SECTION J

  18. SECTION J

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin ofEnergy at Waste-to-EnergySEAB_Minutes_1_20_11.pdfSEB SecretariatJ-1 SECTION JK-1

  19. Assessment of Fission Product Cross-Section Data for Burnup Credit Applications

    SciTech Connect (OSTI)

    Leal, Luiz C [ORNL; Derrien, Herve [ORNL; Dunn, Michael E [ORNL; Mueller, Don [ORNL

    2007-12-01T23:59:59.000Z

    Past efforts by the Department of Energy (DOE), the Electric Power Research Institute (EPRI), the Nuclear Regulatory Commission (NRC), and others have provided sufficient technical information to enable the NRC to issue regulatory guidance for implementation of pressurized-water reactor (PWR) burnup credit; however, consideration of only the reactivity change due to the major actinides is recommended in the guidance. Moreover, DOE, NRC, and EPRI have noted the need for additional scientific and technical data to justify expanding PWR burnup credit to include fission product (FP) nuclides and enable burnup credit implementation for boiling-water reactor (BWR) spent nuclear fuel (SNF). The criticality safety assessment needed for burnup credit applications will utilize computational analyses of packages containing SNF with FP nuclides. Over the years, significant efforts have been devoted to the nuclear data evaluation of major isotopes pertinent to reactor applications (i.e., uranium, plutonium, etc.); however, efforts to evaluate FP cross-section data in the resonance region have been less thorough relative to actinide data. In particular, resonance region cross-section measurements with corresponding R-matrix resonance analyses have not been performed for FP nuclides. Therefore, the objective of this work is to assess the status and performance of existing FP cross-section and cross-section uncertainty data in the resonance region for use in burnup credit analyses. Recommendations for new cross-section measurements and/or evaluations are made based on the data assessment. The assessment focuses on seven primary FP isotopes (103Rh, 133Cs, 143Nd, 149Sm, 151Sm, 152Sm, and 155Gd) that impact reactivity analyses of transportation packages and two FP isotopes (153Eu and 155Eu) that impact prediction of 155Gd concentrations. Much of the assessment work was completed in 2005, and the assessment focused on the latest FP cross-section evaluations available in the international nuclear data community as of March 2005. The accuracy of the cross-section data was investigated by comparing existing cross-section evaluations against available measured cross-section data. When possible, benchmark calculations were also used to assess the performance of the latest FP cross-section data. Since March 2005, the U.S. and European data projects have released newer versions of their respective data files. Although there have been updates to the international data files and to some degree FP data, much of the updates have included nuclear cross-section modeling improvements at energies above the resonance region. The one exception is improved ENDF/B-VII cross-section uncertainty data or covariance data for gadolinium isotopes. In particular, ENDF/B-VII includes improved 155Gd resonance parameter covariance data, but they are based on previously measured resonance data. Although the new covariance data are available for 155Gd, the conclusions of the FP cross-section data assessment of this report still hold in lieu of the newer international cross-section data files. Based on the FP data assessment, there is judged to be a need for new total and capture cross-section measurements and corresponding cross-section evaluations, in a prioritized manner, for the nine FPs to provide the improved information and technical rigor needed for criticality safety analyses.

  20. FINAL/ SCIENTIFIC TECHNICAL REPORT

    SciTech Connect (OSTI)

    McDonald, Henry; Singh, Suminderpal

    2006-08-28T23:59:59.000Z

    The overall objective of the Chattanooga fuel cell demonstrations project was to develop and demonstrate a prototype 5-kW grid-parallel, solid oxide fuel cell (SOFC) system that co-produces hydrogen, based on Ion America’s technology. The commercial viability of the 5kW SOFC system was tested by transporting, installing and commissioning the SOFC system at the Alternative Energy Laboratory at the University of Tennessee – Chattanooga. The system also demonstrated the efficiency and the reliability of the system running on natural gas. This project successfully contributed to the achievement of DOE technology validation milestones from the Technology Validation section of the Hydrogen, Fuel Cells and Infrastructure Technologies Program Multi-Year Research, Development and Demonstration Plan. Results of the project can be found in the final technical report.

  1. DA NE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    sul piano orizzontale di simmetria a 3 cm dall'asse, sia a destra che a sinistra, in funzione della, definito come il valore del campo misurato diviso per la distanza dall'asse. Il punto di lavoro dei simmetria orizzontale lungo rette parallele all'asse del magnete, in 11 diverse posizioni spaziate di 10 mm

  2. DA!NE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    'ultima con del cianoacrilato. Il sistema di riferimento associato alle misure è così fatto: · asse x secondo la direzione ortogonale al pavimento; · asse y secondo la direzione principale della strumentazione (asse motore-encoder); · asse z ortogonale ai precedenti, in modo da ottenere una terna equiversa. 6

  3. Technical Note/ Improved Water Table Dynamics in MODFLOW

    E-Print Network [OSTI]

    Barrash, Warren

    series of ground water simulation codes, developed by the U.S. Geological Survey, is possi- bly the most storage as well as the physical dimensions of the sat- urated region. The change in storage is modeled of the cell. While the change in storage occurs at the water table, the influence is applied to the entire

  4. DA NE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    of the Splitter Magnet, built by TESLA Engineering, Storrington (U.K.), was delivered to LNF on July 19, 1996. Due to summer holidays, the magnetic measurements and magnet characterization started beginning of September of the construction. In fact, there has not been any necessity of magnetic length adjustment, that means no machining

  5. NCAR/TN486+STR NCAR TECHNICAL NOTE

    E-Print Network [OSTI]

    17 1.1.1 CCM0 and CCM1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 18 1.1.2 CCM2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 19 1.1.3 CCM3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 20 1

  6. NCAR/TN-486+STR NCAR TECHNICAL NOTE

    E-Print Network [OSTI]

    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 1.1.1 CCM0 and CCM1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 1.1.2 CCM2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 1.1.3 CCM3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320 1.1.4 CAM

  7. NCAR/TN--464+STR NCAR TECHNICAL NOTE

    E-Print Network [OSTI]

    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1.1 CCM0 and CCM1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1.2 CCM2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1.3 CCM3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1

  8. NCAR/TN485+STR NCAR TECHNICAL NOTE

    E-Print Network [OSTI]

    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1.1 CCM0 and CCM1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1.2 CCM2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1.3 CCM3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1.4 CAM3

  9. NCAR/TN-485+STR NCAR TECHNICAL NOTE

    E-Print Network [OSTI]

    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1.1 CCM0 and CCM1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1.2 CCM2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1.3 CCM3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1.4 CAM3

  10. NCAR/TN464+STR NCAR TECHNICAL NOTE

    E-Print Network [OSTI]

    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1.1 CCM0 and CCM1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1.2 CCM2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1.3 CCM3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1

  11. JTTEE5 5:35-41 Technical Note 9 International

    E-Print Network [OSTI]

    Settles, Gary S.

    , it is the only way to achieve high speed flow at the nozzle exit. The nozzle must contract to a minimum area 1950, simple constant-area or straight-bore nozzles were used (see Fig. 1 from Ref 3). According to the development of modern blasting nozzles with a converging-diverging shape and a minimum throat area. Of course

  12. NIST Technical Note 1666 Modeling the Effects of Outdoor Gasoline

    E-Print Network [OSTI]

    electric generators on indoor CO exposure. The study was based on computer simulations of CO transport affect CO levels near the house significantly, in general, the results supported the conclusions next closest distance modeled) generally resulted in low CO entry indoors, especially with the exhaust

  13. DA!NE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    of the sensitivity to the mechanical deformations induced by the surface power loss on the metallic walls distribution inside the structure due respectively to radiation heat and electromagnetic power loss produced if the temperature profile in case of radiation heating is flatter than that induced by the rf-surface power loss

  14. Summary Notes from 28 May 2008 Generic Technical Issue Discussion...

    Office of Environmental Management (EM)

    radionuclide inventories for which the primary purpose is safety concerns such as corrosion, flammability or criticality as opposed to performance assessment may not provide...

  15. NATIONAL RADIO ASTRONOMY OBSERVATORY ELECTRONICS DIVISION TECHNICAL NOTE NO 113

    E-Print Network [OSTI]

    Groppi, Christopher

    the Apple II for Graphics Output from VAX FA AUTHOR(S): Stowe Keller DATE: August 3, 1982 Distribution: J;USING THE APPLE II FOR GRAPHICS OUTPUT FROM VAX FARANT Stowe Keller I. Introduction FARANT, a program design. It has been implemented on the HP-9845A desktop computer and the VAX 11. The HP-9845A offers

  16. WRP Technical Note FW-SW-4. 1 ~-May 1994

    E-Print Network [OSTI]

    and is a common resident at Corps of Engineers reservoir projects. BACKGROUND: Since wood ducks are cavity nesters populations. Such settings include reservoir backwater areas, tributary streams, tailwater areas, subimpoundments, abandoned sand or gravel pits, oxbow lakes, and beaver ponds. Nest box programs have been

  17. Technical Notes Single-Sensor Identification of Spinning

    E-Print Network [OSTI]

    Huang, Xun

    of sound, m=s c = acoustic perturbation amplitude f = frequency, Hz i = complex part Jm = mth Bessel the attention of communities that live near airports to noise pollution. To address this environmental

  18. NIST TECHNICAL NOTE 1665 Database-Assisted Design for Wind

    E-Print Network [OSTI]

    Perkins, Richard A.

    to calculate response databases for the demand-to-capacity indexes, inter-story drift, and top floor outside NIST are cited which describe measurements in certain non-SI units. Thus, it is more practical of Standards and Tech- nology, nor does it imply that the products or procedures are the best available

  19. NIST Technical Note 1545 Attenuation of Radio Wave Signals

    E-Print Network [OSTI]

    ................................................................................. 13 5.11 Commerce City, CO Oil Refinery

  20. Technical Notes Attenuated Total Reflection Design for in Situ

    E-Print Network [OSTI]

    McCusker, James K.

    Hendrik Visser,, Aimee E. Curtright, James K. McCusker,,§ and Kenneth Sauer*,, Melvin Calvin Laboratory, 305-308. (2) Ashley, K. Talanta 1991, 38, 1209-1218. (3) Foley, J. K.; Pons, S. Anal. Chem. 1985, 57

  1. Technical Note Defining the habenula in human neuroimaging studies

    E-Print Network [OSTI]

    nucleus (rMTG), which synapse onto dopamine neurons in the ventral teg- mental area and the substantia

  2. Technical Note: Improved implementation of doppler broadening in MCNP5

    SciTech Connect (OSTI)

    Bartol, Laura J.; DeWerd, Larry A. [University of Wisconsin-Madison, Department of Medical Physics, Madison, Wisconsin 53705 (United States)

    2012-09-15T23:59:59.000Z

    Purpose: Incoherent scattering has a substantial effect on spectroscopic measurements and simulations. Many general-purpose Monte Carlo codes include models that account for the effects of bound electrons on incoherent scattering, including Doppler broadening (DB). This work investigates the DB model used in the Monte Carlo N-particle transport code (MCNP5). Methods: Simulations were run with three versions of MCNP5: v1.51, v1.60, and a modified form of v1.60 (v1.60m). All simulations used the MCPLIB04 photon data library, which presents the electron subshell data for incoherent scattering in the form of a probability density function. In v1.60m, the source code was altered to sample the electron subshell from a cumulative density function instead. Each version of the code was tested using an identical set of simulations that investigated DB in a slab of silicon at scattering angles of 15 Degree-Sign , 30 Degree-Sign , and 45 Degree-Sign . For each angle, simulations were run for multiple energies between 200 keV and 800 keV. The spectrum of singly-scattered photons at the exit of the slab was scored. Spectra were analytically calculated for comparison. Results: In v1.51, DB was modeled for incident photon energies below 760 keV, 384 keV, and 260 keV at scattering angles of 15 Degree-Sign , 30 Degree-Sign , and 45 Degree-Sign , respectively. Above these energy thresholds, v1.51 did not model DB. The spectra calculated using v1.60 and v1.60m exhibited DB for all energy-angle combinations; however, v1.60m, exhibited more energy broadening than did v1.60. The spectra calculated with v1.60m agreed with the analytical calculations. Conclusions: MCNP5 v1.51 and v1.60 model partial broadening when used with the MCPLIB04 data library. MCNP5 v1.60m models DB more accurately due to the form of the electron subshell data. In response to these results, Los Alamos National Laboratory has released a new photon data library, MCPLIB84, that presents the electron subshell data in cumulative distribution form. MCNP5 v1.60 should be used with this library when incoherent scattering has a significant impact on simulation results.

  3. TECHNICAL NOTES Determination of Length of a Horizontal Drain

    E-Print Network [OSTI]

    Chahar, B. R.

    . Chahar1 Abstract: An earth dam can be prevented from a seepage failure due to softening of the downstream

  4. BNUSNS TECHNICA!L NOTE s. Y. Zhang

    E-Print Network [OSTI]

    . Introd uction The useof the BeamPosition Monitor (BPM) systemfor the Spallation Neutron Source requirement Ifor the BPM system includes, 1. Intensity from a quarter of the first turn injection, 5 x 1010,to for each set of detector . 7. Reliability, radiation damage protectio~. To decidewhich type of BPM, i

  5. NCAR/TN-450+IA NCAR TECHNICAL NOTE

    E-Print Network [OSTI]

    Potter, Don

    and creep mutation . . . . . . . .. . . . .. . . . . .. . . . .. . . . 34 3.6 Performance on test problems . . .. . . . .. . . . .. . . . . . . . . . .. . . . .. . . . . .. . . . .. . . . . .7 1.4 A set of test problems Test problem P2

  6. Technical note Piezo-controlled intracavity wavelength selector for the

    E-Print Network [OSTI]

    Peale, Robert E.

    -frequency rotation. Such a system may ®nd practical use in emissions moni- toring and detection of explosives, illicit drugs, or chemical warfare agents. A possible fundamental science application is laser was of smaller diameter (4 mm) than the laser crystal to allow output of radiation. The lamellar grating type [2

  7. TECHNICAL NOTE Twelve novel microsatellite markers for the marbled salamander,

    E-Print Network [OSTI]

    Georgia, University of

    successful when applied in genetic studies (Bartoszek and Greenwald 2009, Green- wald et al. 2009, CA) for the construction of the micro- satellite library. DNA was then serially enriched twice- ched libraries were sequenced on a 454 using titanium chemistry following standard Roche 454 library

  8. NATIONAL RADIO ASTRONOMY OBSERVATORY ELECTRONICS DIVISION TECHNICAL NOTE NO . 108

    E-Print Network [OSTI]

    Groppi, Christopher

    ATION RFI IN RADIOMETER SYSTEMS AUTHOR (S) William D. Brundage Distribution: GB Library CV Library VLA Library TU Libraries: J. Payne P. Napier R. Thompson M. Balister S. Weinreb G. Behrens C. Brockway J. Coe by inter modulation within a radio eter system has occurred at Green Bank. Only occasionally has the cause

  9. TECHNICAL NOTE Shannon L. Datwyler,1,2

    E-Print Network [OSTI]

    Weiblen, George D

    in Hemp and Marijuana (Cannabis sativa L.) According to Amplified Fragment Length PolymorphismsÃ? ABSTRACT cultivars have forensic utility, but no direct comparison of hemp and marijuana amplified fragment length polymorphism (AFLP) has been made to date. Genetic variation was surveyed in three populations of fiber hemp

  10. Technical Notes UV Resonance Raman Spectroscopic Detection of

    E-Print Network [OSTI]

    Asher, Sanford A.

    - in wastewater for the real-time control of water treatment plants. The reliability and performance of biological nutrient removal (BNR) wastewater treatment plants (WWTPs) can be enhanced by the ability to monitor the utility of UV resonance Raman3-8 spectroscopy to monitor nitrate and nitrite in wastewater treatment

  11. Technical Note Solution of periodic heating problems by the

    E-Print Network [OSTI]

    Barber, James R.

    , the valves of an internal combustion engine experience direct heating from the combusting gases, cooling from numerical simulation of every cycle. It also permits a direct solution for the nodal temperatures-dimensional) examples and the obvious way to proceed is to use numerical simulation [5] ± i.e., to step in time solving

  12. State Energy Data System Consumption Estimates Technical Notes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our Instagram Secretary900 SpecialNanoparticulate FeS

  13. Technical Consultant Report Template

    Broader source: Energy.gov [DOE]

    Technical Consultant Report Template, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  14. TECHNICAL BASIS DOCUMENT FOR NATURAL EVENT HAZARDS

    SciTech Connect (OSTI)

    KRIPPS, L.J.

    2006-07-31T23:59:59.000Z

    This technical basis document was developed to support the documented safety analysis (DSA) and describes the risk binning process and the technical basis for assigning risk bins for natural event hazard (NEH)-initiated accidents. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous conditions based on an evaluation of the frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR-level controls.

  15. Technical basis document for natural event hazards

    SciTech Connect (OSTI)

    CARSON, D.M.

    2003-03-20T23:59:59.000Z

    This technical basis document was developed to support the Tank Farms Documented Safety Analysis (DSA), and describes the risk binning process and the technical basis for assigning risk bins for natural event hazards (NEH)-initiated representative accident and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous conditions based on an evaluation of the frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR-level controls. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, ''Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses'', as described in this report.

  16. Editor's Note: Hurricane Sandy,

    E-Print Network [OSTI]

    Rosen, Jay

    Editor's Note: Hurricane Sandy, also known as Super Storm Sandy, Tropi- cal Storm Sandy, or just to protect the public, vital infrastructure, and the environment. Hurricane Sandy When Joseph Bruno, New York- nuity that the city demonstrated in the wake of Hurricane Sandy. So when he addressed a forum at New

  17. CTBT technical issues handbook

    SciTech Connect (OSTI)

    Zucca, J.J. [ed.

    1994-05-01T23:59:59.000Z

    The purpose of this handbook is to give the nonspecialist in nuclear explosion physics and nuclear test monitoring an introduction to the topic as it pertains to a Comprehensive Test Ban Treaty (CTBT). The authors have tried to make the handbook visually oriented, with figures paired to short discussions. As such, the handbook may be read straight through or in sections. The handbook covers four main areas and ends with a glossary, which includes both scientific terms and acronyms likely to be encountered during CTBT negotiations. The following topics are covered: (1) Physics of nuclear explosion experiments. This is a description of basic nuclear physics and elementary nuclear weapon design. Also discussed are testing practices. (2) Other nuclear experiments. This section discusses experiments that produce small amounts of nuclear energy but differ from explosion experiments discussed in the first chapter. This includes the type of activities, such as laser fusion, that would continue after a CTBT is in force. (3) Monitoring tests in various environments. This section describes the different physical environments in which a test could be conducted (underground, in the atmosphere, in space, underwater, and in the laboratory); the sources of non-nuclear events (such as earthquakes and mining operations); and the opportunities for evasion. (4) On-site inspections. A CTBT is likely to include these inspections as an element of the verification provisions, in order to resolve the nature of ambiguous events. This chapter describes some technical considerations and technologies that are likely to be useful. (5) Selecting verification measures. This chapter discusses the uncertain nature of the evidence from monitoring systems and how compliance judgments could be made, taking the uncertainties into account. It also discusses how to allocate monitoring resources, given the likelihood of testing by various countries in various environments.

  18. Software Engineering Course Notes

    E-Print Network [OSTI]

    Damon, Craig A.

    of too many managers is to chase away good people. 1. These roles may be split between technical with a manager. Managers have three roles in software development1: · people management · productivity management personnel research, Kristiansand, Norway. #12;22 Management Managing people Good people management

  19. CRAD, Facility Safety- Technical Safety Requirements

    Broader source: Energy.gov [DOE]

    A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) that can be used for assessment of a contractor's Technical Safety Requirments (TSA).

  20. DIMACS Technical Report 993 February 1999

    E-Print Network [OSTI]

    is proposed for computer­aided interpretation of seismic exploratory data from the so­called crystallineDIMACS Technical Report 99­3 February 1999 Massive data set analysis in seismic explorations, the almost exceptional object of seismic explorations. The seismic exploratory data sets, seismic sections

  1. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-09/0-5444-2 2. Government Accession No. 3. Cross stitching is effective for cracks that are still relatively narrow. Details and specifications are included for a section of US 75 near Sherman that exhibited slab faulting and joint separation. 17. Key

  2. Briefing notes on MPhils

    E-Print Network [OSTI]

    Runde, Jochen

    2009-07-13T23:59:59.000Z

    staff.’ (extract from BP internal report) The CMI MPhil initiative is also serving as an agent of change within Cambridge University. Successes on this front include: great strides in the development of the platform-sharing model (e.g. all CMI... BRIEFING NOTE Professional Practice MPhil Programmes developed under the aegis of CMI CMI has sponsored the development of a number of new MPhils at Cambridge, inspired by the successful ‘Professional Practice’ programmes at MIT. It is the multi...

  3. Federal Technical Capability Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-05-18T23:59:59.000Z

    Provides requirements and responsibilities to ensure recruitment and hiring of technically capable personnel to retain critical technical capabilities within the Department at all times. Cancels DOE M 426.1-1. Canceled by DOE O 426.1.

  4. Technical Fact Sheets

    Broader source: Energy.gov [DOE]

    Technical Fact Sheets (TFS) provide summary-level information on the impact of new, deployed, applied, and/or planned technical approaches supporting EM cleanup projects.  The TFS is presented as a...

  5. Federal Technical Capability

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-11-19T23:59:59.000Z

    This directive defines requirements and responsibilities for meeting the Department of Energy (DOE) commitment to recruiting, deploying, developing, and retaining a technically competent workforce that will accomplish DOE missions in a safe and efficient manner through the Federal Technical Capability Program (FTCP). Cancels DOE M 426.1-1A, Federal Technical Capability Manual.

  6. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-02-23T23:59:59.000Z

    The Order promotes DOE's use of Voluntary Consensus Standards (VCS) as the primary method for application of technical standards and establishes and manages the DOE Technical Standards Program (TSP) including technical standards development, information, activities, issues, and interactions. Admin Chg 1 dated 3-12-13.

  7. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-11-19T23:59:59.000Z

    The Technical Standards Program (TSP) promotes the use of voluntary consensus standards by the Department of Energy (DOE), provides DOE with the means to develop needed technical standards, and manages overall technical standards information, activities, issues, and interactions. Cancels DOE O 1300.2A. Canceled by DOE O 252.1A

  8. Electromagnetic-gravitational cross-sections in external electromagnetic fields

    E-Print Network [OSTI]

    Long, H N; Tran, T A; Tuan, T A; Long, Hoang Ngoc; Van Soa, Dang; Tran, Tuan A; Tuan, Tran Anh

    1994-01-01T23:59:59.000Z

    The classical processes: the conversion of photons into gravitons in the static electromagnetic fields are considered by using Feynman perturbation techniques. The differential cross sections are presented for the conversion in the electric field of the flat condesor and the magnetic field of the selenoid. A numerical evaluation shows that the cross sections may have the observable value in the present technical scenario.

  9. Electromgnetic-gravitational cross-sections in external elctromagnetic fields

    E-Print Network [OSTI]

    Hoang Ngoc Long; Dang Van Soa; Tuan A. Tran

    1994-10-03T23:59:59.000Z

    The classical processes: the conversion of photons into gravitons in the static electromagnetic fields are considered by using Feynman perturbation techniques. The differential cross sections are presented for the conversion in the electric field of the flat condesor and the magnetic field of the selenoid. A numerical evaluation shows that the cross sections may have the observable value in the present technical scenario.

  10. Pennsylvania Act 38/Nutrient Management Program/Technical Manual January 2013

    E-Print Network [OSTI]

    Guiltinan, Mark

    Pennsylvania Act 38/Nutrient Management Program/Technical Manual January 2013 Section IV Record Management Program/Technical Manual January 2013 Section IV Record Keeping and Informational Requirements Management Information for each crop management unit. 5. Manure sampling records. Records of manure testing

  11. Notes and Definitions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The EnergyCenterDioxideDocumentationThreeNewsfuelNotes and Definitions

  12. Technical Notes TECHNICAL NOTES are short manuscripts describing new developments or important results of a preliminary nature. These Notes should not exceed 2500

    E-Print Network [OSTI]

    Choueiri, Edgar

    of the date of receipt. Style requirements are the same as for regular contributions (see inside back cover transform of the voltage at any node n x = length of transmission line min = smallest wavelength present be significantly corrupted by the action of the external power-supply circuitry; therefore, power-supply effects

  13. 2002 Spring Technical Meeting Central States Section / The Combustion Institute

    E-Print Network [OSTI]

    Tennessee, University of

    Motors Research & Development Center Local Fuel-Air Ratio Measurements in Internal Combustion Engines Research Laboratory A Multi-dimensional Combustion Model for Gasoline Direct-Injection Engine Design 10 Emissions from Small Utility Engines 12:00 PM Lunch & Business Meeting SESSION A.2: Multiphase Combustion

  14. Notes on basic algebraic geometry

    E-Print Network [OSTI]

    2008-06-16T23:59:59.000Z

    Jun 16, 2008 ... Notes on basic algebraic geometry ...... Having discovered the basic equation ..... back to a rational function on X. Thus we get a nonzero ...

  15. Technical background document for draft soil screening level guidance

    SciTech Connect (OSTI)

    Not Available

    1994-03-01T23:59:59.000Z

    The document provides technical details of the derivation of the September 30, 1993, draft Soil Screening Levels (SSLs) Guidance for Superfund (PB93-963508). The document is presented in two sections. Section I defines SSL and provides background information on the development of SSLs and their application and implementation at Superfund sites, including sampling schemes for measuring SSL attainment. It also provides draft SSLs developed for 30 chemicals. Section II provides the technical basis for the development of SSLs addressing direct ingestion of soil, inhalation of volatiles and fugitive dust, and the soil-to-ground-water exposure pathway, including the assumptions and theories used the their development.

  16. NOTE / NOTE Sex ratio variation in gynodioecious species of

    E-Print Network [OSTI]

    Dorken, Marcel

    NOTE / NOTE Sex ratio variation in gynodioecious species of Echium endemic to the Canary Islands Marcel E. Dorken Abstract: Species of Echium from the Canary Islands represent an adaptive radiation fertility of females and hermaphrodites were de- tected. Key words: Canary Islands, Echium, island radiation

  17. Notes2Providers.doc -1-Notes to Retail Providers

    E-Print Network [OSTI]

    providers that purchase electricity from a power pool that submits an Annual Report to the Energy CommissionNotes2Providers.doc -1- Notes to Retail Providers February 2003 Power Source Disclosure an energy mix or fuel mix different than the California Mix, (Net System Power)i . As a retail provider you

  18. External Technical Review Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube|6721 FederalTexas EnergyofIdahoExceptions toPhotovoltaicsExternal Technical

  19. External Technical Reviews | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube|6721 FederalTexas EnergyofIdahoExceptions toPhotovoltaicsExternal TechnicalWaste

  20. Technical Assistance: Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMayDepartment ofEnergyTeam Cumberland » TeamTechnicalDepartment

  1. Technical Publications by System | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMayDepartment ofEnergyTeam Cumberland »Department ofPotentialTechnical

  2. Technical Talks Timing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a technical talk is to communicate information to the audience. The Speaker Keep in mind that your objective is communication of information. Mumbling, monotone speech and use...

  3. DOE Technical Assistance Program

    Broader source: Energy.gov (indexed) [DOE]

    Designing Effective Residential Retrofit Programs eere.energy.gov The Parker Ranch installation in Hawaii DOE Technical Assistance Program Quality Assurance for Residential...

  4. Annual resources report. [Glossary on technical terms

    SciTech Connect (OSTI)

    Not Available

    1982-01-01T23:59:59.000Z

    The report is separated into the following sections: acknowledgments; a table of contents; a list of tables and figures; a glossary; an introduction; an overview of the role of energy resources in New Mexico; separate sections on oil and gas, coal, electrical generation, uranium, and geothermal energy; a section on the geologic setting of oil and gas, coal, and uranium; an appendix of additional tables pertaining to oil and gas development; and a listing of selected references. The glossary is a brief listing of technical terms used in the report with simplified definitions for the reader's use. The overview contains highlights of data found in the report as well as comparisons of New Mexico's resources with those of other states and the nation. In general, each section covering a resource area describes reserves, production, prices, consumption, transportation, employment, and revenue statistics over the past ten or more years and projections to the year 2000.

  5. Federal Technical Capability

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-11-19T23:59:59.000Z

    To define requirements and responsibilities for meeting the Department of Energy (DOE) commitment to recruiting, deploying, developing, and retaining a technically competent workforce that will accomplish DOE missions in a safe and efficient manner through the Federal Technical Capability Program (FTCP). Chg. 1 dated 9-20-11 Cancels DOE O 426.1. Cancels DOE P 426.1.

  6. About Technical Assistance

    Broader source: Energy.gov [DOE]

    As technologies proceed along the development pipeline, most face major hurdles as they attempt to enter commercial markets. Our Technical Assistance program helps lower a range of institutional barriers to prepare innovative, energy-efficient technologies and energy management systems for full commercial deployment. These projects and activities address barriers that are not technical, Technology Readiness Level 9.

  7. Technical Report Computer Laboratory

    E-Print Network [OSTI]

    Haddadi, Hamed

    the opportunity to consider a physical attack, with very little to lose. We thus set out to analyse the deviceTechnical Report Number 592 Computer Laboratory UCAM-CL-TR-592 ISSN 1476-2986 Unwrapping J. Murdoch Technical reports published by the University of Cambridge Computer Laboratory are freely

  8. Federal Technical Capability Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-06-05T23:59:59.000Z

    The Federal Technical Capability Manual provides the process for the recruitment, deployment, development, and retention of Federal personnel with the demonstrated technical capability to safely accomplish the Departments missions and responsibilities at defense nuclear facilities. Canceled by DOE M 426.1-1A. Does not cancel other directives.

  9. Depleted Uranium Technical Brief

    E-Print Network [OSTI]

    Depleted Uranium Technical Brief United States Environmental Protection Agency Office of Air and Radiation Washington, DC 20460 EPA-402-R-06-011 December 2006 #12;#12;Depleted Uranium Technical Brief EPA of Radiation and Indoor Air Radiation Protection Division ii #12;iii #12;FOREWARD The Depleted Uranium

  10. MATHEMATICAL ENGINEERING TECHNICAL REPORTS

    E-Print Network [OSTI]

    Yamamoto, Hirosuke

    MATHEMATICAL ENGINEERING TECHNICAL REPORTS A Subband Coding Approach to Control under Limited Data Rates and Message Losses Hideaki ISHII and Shinji HARA (Communicated by Kazuo Murota) METR 2006­22 April METR technical reports are published as a means to ensure timely dissemination of scholarly

  11. Temperature Dependent Neutron Scattering Sections for Polyethylene

    E-Print Network [OSTI]

    Roger E. Hill; C. -Y. Liu

    2003-09-05T23:59:59.000Z

    This note presents neutron scattering cross sections for polyethylene at 296 K, 77 K and 4 K derived from a new scattering kernel for neutron scattering off of hydrogen in polyethylene. The kernel was developed in ENDF-6 format as a set of S(alpha,beta) tables using the LEAPR module of the NJOY94 code package. The polyethylene density of states (from 0 to sub eV) adopted to derive the new kernel is presented. We compare our calculated room temperature total scattering cross sections and double differential cross sections at 232 meV at various angles with the available experimental data (at room temperature), and then extrapolate the calculations to lower temperatures (77K and 4K). The new temperature dependent scattering kernel gives a good quantitative fit to the available room temperature data and has a temperature dependence that is qualitatively consistent with thermodynamics.

  12. Active Technical Standards Managers List

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TECHNICAL STANDARDS PROGRAM ASSIGNMENT TELEPHONEFAXEMAIL NAME DOE FACILITYADDRESS LOC CODE AU-30 Jeff D. Feit DOE Technical Standards Program, Manager U.S. Department of Energy...

  13. Meeting Notes re NOI for Convention on Supplementary Compensation |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking ofOil & GasTechnical PublicationsDepartment

  14. Here are my online notes for my Calculus I course that I teach here at Lamar University. Despite the fact that these are my "class notes", they should be accessible to anyone wanting to learn

    E-Print Network [OSTI]

    Morton, Dena - Department of Mathematics and Computer Science, Xavier University

    Preface Here are my online notes for my Calculus I course that I teach here at Lamar University http://tutorial.math.lamar.edu/terms.aspx In this section we are going to look at another type

  15. Technical Foundations of the Agent Contest 2008

    E-Print Network [OSTI]

    Zachmann, Gabriel

    (Technical Computer Science) Prof. Dr. Gabriel Zachmann (Computer Graphics) #12;Technical Foundations

  16. Technical Standards, Style Guide- August 1, 2000

    Broader source: Energy.gov [DOE]

    Style Guide for the Preparation of DOE Technical Standards (Standards, Handbooks, and Technical Standards Lists)

  17. Technical Planning Basis

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2007-07-11T23:59:59.000Z

    The Guide assists DOE/NNSA field elements and operating contractors in identifying and analyzing hazards at facilities and sites to provide the technical planning basis for emergency management programs. Cancels DOE G 151.1-1, Volume 2.

  18. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-02-23T23:59:59.000Z

    The order establishes the DOE Technical Standards Program. Cancels DOE O 252.1 and DOE G 252.1-1. Admin Chg 1, dated 3-12-13 cancels DOE O 252.1A.

  19. OSH technical reference manual

    SciTech Connect (OSTI)

    Not Available

    1993-11-01T23:59:59.000Z

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  20. DOE Technical Assistance Program

    Broader source: Energy.gov (indexed) [DOE]

    Solid-State Solutions for Municipal Lighting: What You'll Need to Know eere.energy.gov The Parker Ranch installation in Hawaii DOE Technical Assistance Program Solid-State...

  1. MIXING OF INCOMPATIBLE MATERIALS IN WASTE TANKS TECHNICAL BASIS DOCUMENT

    SciTech Connect (OSTI)

    SANDGREN, K.R.

    2003-10-15T23:59:59.000Z

    This document presents onsite radiological, onsite toxicological, and offsite toxicological consequences, risk binning, and control decision results for the mixing of incompatible materials in waste tanks representative accident. This technical basis document was developed to support the tank farms documented safety analysis (DSA) and describes the risk binning process, the technical basis for assigning risk bins, and the controls selected for the mixing of incompatible materials representative accident and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and/or technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous conditions based on an evaluation of the frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR-level controls.

  2. Technical basis document for the evaporator dump accident

    SciTech Connect (OSTI)

    GOETZ, T.G.

    2003-03-22T23:59:59.000Z

    This technical basis document was developed to support the documented safety analysis (DSA) and describes the risk binning process and the technical basis for assigning risk bins for the evaporator dump representative accident and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and/or technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous conditions based on an evaluation of the frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR-level controls. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, ''Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses'', as described in this report.

  3. Mixing of incompatible materials in waste tanks technical basis document

    SciTech Connect (OSTI)

    SANDGREN, K.R.

    2003-03-21T23:59:59.000Z

    This technical basis document was developed to support the Tank Farms Documented Safety Analysis (DSA) and describes the risk binning process, the technical basis for assigning risk bins, and the controls selected for the mixing of incompatible materials representative accident and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSCs) and/or technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous conditions based on an evaluation of the frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR level controls. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, ''Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses'', as described in this report.

  4. Section 1: Contact Information Section 2: Employment History

    E-Print Network [OSTI]

    Section 1: Contact Information Section 2: Employment History Section 3: Educational History Section 4: Additional Required Information Employment Application The Ernest Orlando Lawrence Berkeley National Laboratory is an equal opportunity employer committed to the development of a diverse workforce

  5. Standard technical specifications: Babcock and Wilcox Plants. Revision 1

    SciTech Connect (OSTI)

    NONE

    1995-04-01T23:59:59.000Z

    This report documents the results of the combined effort of the NRC and the industry to produce improved Standard Technical Specifications (STS), Revision 1 for Babcock & Wilcox Plants. The changes reflected in Revision 1 resulted from the experience gained from license amendment applications to convert to these improved STS or to adopt partial improvements to existing technical specifications. This NUREG is the result of extensive public technical meetings and discussions between the Nuclear Regulatory Commission (NRC) staff and various nuclear power plant licensees, Nuclear Steam Supply System (NSSS) Owners Groups, NSSS vendors, and the Nuclear Energy Institute (NEI). The improved STS were developed based on the criteria in the Final Commission Policy Statement on Technical Specifications Improvements for Nuclear Power Reactors, dated July 22, 1993. The improved STS will be used as the basis for individual nuclear power plant licensees to develop improved plant-specific technical specifications. This report contains three volumes. Volume 1 contains the Specifications for all chapters and sections of the improved STS. Volume 2 contains the Bases for Chapters 2.0 and 3.0, and Sections 3.1--3.3 of the improved STS. Volume 3 contains the Bases for Sections 3.4--3.9 of the improved STS.

  6. Technical Assistance to Developers

    SciTech Connect (OSTI)

    Rockward, Tommy [Los Alamos National Laboratory; Borup, Rodney L. [Los Alamos National Laboratory; Garzon, Fernando H. [Los Alamos National Laboratory; Mukundan, Rangachary [Los Alamos National Laboratory; Spernjak, Dusan [Los Alamos National Laboratory

    2012-07-17T23:59:59.000Z

    This task supports the allowance of technical assistance to fuel-cell component and system developers as directed by the DOE. This task includes testing of novel materials and participation in the further development and validation of single cell test protocols. This task also covers technical assistance to DOE Working Groups, the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Driving Research and Innovation for Vehicle efficiency and Energy sustainability (U.S. Drive) Fuel Cell Technology Team. Assistance includes technical validation of new fuel cell materials and methods, single cell fuel cell testing to support the development of targets and test protocols, and regular advisory participation in other working groups and reviews. This assistance is made available to PEM fuel cell developers by request and DOE Approval. The objectives are to: (1) Support technically, as directed by DOE, fuel cell component and system developers; (2) Assess fuel cell materials and components and give feedback to developers; (3) Assist the DOE Durability Working Group with the development of various new material durability Testing protocols; and (4) Provide support to the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Fuel Cell Technology Team. FY2012 specific technical objectives are: (1) Evaluate novel MPL materials; (2) Develop of startup/ shutdown protocol; (3) Test the impact of hydrophobic treatment on graphite bi-polar plates; (4) Perform complete diagnostics on metal bi-polar plates for corrosion; and (5) Participate and lead efforts in the DOE Working Groups.

  7. A note on axial symmetries

    E-Print Network [OSTI]

    Christopher Beetle; Shawn Wilder

    2013-12-31T23:59:59.000Z

    This note describes a local scheme to characterize and normalize an axial Killing field on a general Riemannian geometry. No global assumptions are necessary, such as that the orbits of the Killing field all have period $2 \\pi$. Rather, any Killing field that vanishes at at least one point necessarily has the expected global properties.

  8. University of North Carolina at Charlotte Design and Construction Manual Section 2, Division 03 Concrete

    E-Print Network [OSTI]

    Xie,Jiang (Linda)

    . American Concrete Institute (ACI) B. American Society for Testing and Materials (ASTM) C. Portland Cement ­ Concrete SECTION 2 DIVISION 03 CONCRETE #12;University of North Carolina at Charlotte Design and Construction Manual Section 2, Division 03 ­ Concrete DIVISION 3 - CONCRETE Note: This is a guide for Designers

  9. SECTION 1: APPLICANT DETAILS Surname (as on Passport) First Name Middle Initial

    E-Print Network [OSTI]

    Qualification SECTION 3: EDUCATIONAL HISTORY Name of Exam Year Taken List Subjects and Results Schools Attended note that Irish State Exam results are available from the State Examinations Board e-mail: statements. Signature Date I agree to be bound by the rules and regulations of UCD Dublin. secTion 6: si

  10. University of North Carolina at Charlotte Design and Construction Manual Section 2, Division 23 HVAC

    E-Print Network [OSTI]

    Xie,Jiang (Linda)

    ­ HVAC SECTION 2 DIVISION 23 HVAC #12;University of North Carolina at Charlotte Design and Construction Manual Section 2, Division 23 ­ HVAC DIVISION 23 - HVAC Note: This is a guide for Designers only 23 0510 - MECHANICAL GENERAL - HVAC PART 1 - GENERAL 1.1 MECHANICAL DESIGNER: A. Design

  11. Climate Vison: Resources and Links - Technical Information

    Office of Scientific and Technical Information (OSTI)

    Technical Information Publications Case Studies Publications DOE BestPractices Technical Publications The DOE BestPractices team offers a broad selection of technical publications...

  12. Technical Consultant RFP | Department of Energy

    Energy Savers [EERE]

    RFP Technical Consultant RFP Technical Consultant RFP, from the Tool Kit Framework: Small Town University Energy Program (STEP). C3b Technical Consultant RFP.pdf More Documents &...

  13. PFBC HGCU Test Facility. Fourth quarterly technical progress report, CY 1992

    SciTech Connect (OSTI)

    Not Available

    1993-01-01T23:59:59.000Z

    This is the thirteenth Technical Progress Report submitted to the Department of Energy (DOE) in connection with the cooperative agreement between the DOE and Ohio Power Company for the Tidd PFBC Hot Gas Clean Up Test Facility. This report covers the period of work completed during the Fourth Quarter of CY 1992. The following are highlights of the activities that occurred during this report period: Initial operation of the Advanced Particle Filter (APF) occurred during this quarter. The following table summarizes the operating dates and times. HGCU ash lockhopper valve plugged with ash. Primary cyclone ash pluggage. Problems with the coal water paste. Unit restarted warm 13 hours later. HGCU expansion joint No. 7 leak in internal ply of bellows. Problems encountered during these initial tests included hot spots on the APP, backup cyclone and instrumentation spools, two breakdowns of the backpulse air compressor, pluggage of the APF hopper and ash removal system, failure (breakage) of 21 filter candles, leakage of the inner ply of one (1) expansion joint bellows, and numerous other smaller problems. These operating problems are discussed in detail in a subsequent section of this report. Following shutdown and equipment inspection in December, design modifications were initiated to correct the problems noted above. The system is scheduled to resume operation in March, 1993.

  14. Technical Report Computer Laboratory

    E-Print Network [OSTI]

    Haddadi, Hamed

    for criminal activity. One general attack route to breach the security is to carry out physical attack afterTechnical Report Number 829 Computer Laboratory UCAM-CL-TR-829 ISSN 1476-2986 Microelectronic report is based on a dissertation submitted January 2009 by the author for the degree of Doctor

  15. MATHEMATICAL ENGINEERING TECHNICAL REPORTS

    E-Print Network [OSTI]

    Yamamoto, Hirosuke

    MATHEMATICAL ENGINEERING TECHNICAL REPORTS Modeling of Contagious Credit Events and Risk Analysis holder. #12;Modeling of Contagious Credit Events and Risk Analysis of Credit Portfolios Suguru YAMANAKA This paper presents a new model of the intensities of contagious credit events such as rating changes

  16. Technical basis for internal dosimetry at Hanford

    SciTech Connect (OSTI)

    Sula, M.J.; Carbaugh, E.H.; Bihl, D.E.

    1991-07-01T23:59:59.000Z

    The Hanford Internal Dosimetry Program, administered by Pacific Northwest Laboratory for the US Department of Energy, provides routine bioassay monitoring for employees who are potentially exposed to radionuclides in the workplace. This report presents the technical basis for routine bioassay monitoring and the assessment of internal dose at Hanford. The radionuclides of concern include tritium, corrosion products ({sup 58}Co, {sup 60}Co, {sup 54}Mn, and {sup 59}Fe), strontium, cesium, iodine, europium, uranium, plutonium, and americium,. Sections on each of these radionuclides discuss the sources and characteristics; dosimetry; bioassay measurements and monitoring; dose measurement, assessment, and mitigation and bioassay follow-up treatment. 78 refs., 35 figs., 115 tabs.

  17. 14655 Section J

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0, Revision 4 ATTACHMENT J.10 WAGE DETERMINATIONS - SERVICE CONTRACT ACT (SCA) AND DAVIS-BACON ACT J.10-1 Plateau Remediation Contract Section J Contract No. DE-AC06-08RL14788...

  18. Building, landscape and section

    E-Print Network [OSTI]

    Johnson, Daniel B. (Daniel Bryant)

    1992-01-01T23:59:59.000Z

    All buildings have in their section a relationship to the landscape on which they are sited. Therefore we as inhabitants of these buildings may or may not have a relationship with the landscape. It is the supposition of ...

  19. Name: ) Section: ' PID:

    E-Print Network [OSTI]

    MATH 173 ' Quiz 4 Thursday Sep. 23. Name: ) Section: ' PID: Solve the problem systematically and neatly and show all your work. 1.(3pts) Find the length of the ...

  20. NOTE: OPTIMAL NON-HOMOGENEOUS COMPOSITES FOR ...

    E-Print Network [OSTI]

    R. Tavakoli

    2012-10-02T23:59:59.000Z

    NOTE: OPTIMAL NON-HOMOGENEOUS COMPOSITES FOR. DYNAMIC LOADING REVISITED. R. TAVAKOLI. 1. Problem formulation. Consider ? ? Rd (

  1. THOMSON SCIENTIFIC EndNote Web

    E-Print Network [OSTI]

    texto. · Armazenar até 10.000 referências em sua base de dados pessoal (EndNote Web Library), pro resultados das pesquisas diretamente em sua base de dados pessoal do EndNote Web clicando no botão "Save to EndNote Web". As referências sal- vas em sua base de dados pessoal do EndNote Web serão exibidas com

  2. TECHNICAL STANDARDS PROGRAM TOPICAL COMMITTEES

    Broader source: Energy.gov [DOE]

    PurposeThis procedure describes how topical committees are organized and recognized under the Technical Standards Program. 

  3. OFFSHORE WIND FARMS Guidance note for Environmental

    E-Print Network [OSTI]

    OFFSHORE WIND FARMS Guidance note for Environmental Impact Assessment In respect of FEPA and CPA requirements Version 2 - June 2004 #12;Offshore Wind Farms: Guidance Note for Environmental Impact Assessment 2004 #12;Offshore Wind Farms: Guidance Note for Environmental Impact Assessment in Respect of FEPA

  4. Business Case for Technical Qualification Program Accreditation...

    Broader source: Energy.gov (indexed) [DOE]

    Business Case for Technical Qualification Program Accreditation Incentives Business Case for Technical Qualification Program Accreditation Incentives TQP Accreditation standardize...

  5. Final Technical Report

    SciTech Connect (OSTI)

    Maxwell, Mike, J., P.E.

    2012-08-30T23:59:59.000Z

    The STI product is the Final Technical Report from ReliOn, Inc. for contract award DE-EE0000487: Recovery Act PEM Fuel Cell Systems Providing Emergency Reserve and Backup Power. The program covered the turnkey deployment of 431 ReliOn fuel cell systems at 189 individual sites for AT&T and PG&E with ReliOn functioning as the primary equipment supplier and the project manager. The Final Technical Report provides an executive level summary, a comparison of the actual accomplishments vs. the goals and objectives of the project, as well as a summary of the project activity from the contract award date of August 1, 2009 through the contract expiration date of December 31, 2011. Two photos are included in the body of the report which show hydrogen storage and bulk hydrogen refueling technologies developed as a result of this program.

  6. Honda Transmission Technical Center

    High Performance Buildings Database

    Russells Point, OH The Honda Transmission Technical Center is located on the Honda of America Manufacturing Plant facility site in Russells Point, Ohio. This facility is used for product engineering and market quality testing and analysis of automatic transmissions. The building contains a large workshop area for ten cars, a future dynamometer, two laboratories, an open office area, three conference rooms, a break room, restrooms, and related support areas.

  7. Technical Surveillance Countermeasures Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1993-06-18T23:59:59.000Z

    To prescribe policies, responsibilities and authorities to establish Department of Energy (DOE) Technical Surveillance Countermeasures (TSCM) Program. This order implements the DOE TSCM Procedural Guide, DOE TSCM Operations Manual, DOE TSCM Report Writing Guide and Threat Assessment Scheduling System (TASS) which contain classified policies and procedures concerning the DOE TSCM Program. Cancels DOE 5636.3A. Canceled by DOE O 471.2 dated 9-28-95.

  8. Human Resources Procedures Manual 16 January 2014 Note these procedures are subject to ongoing review. If you find a procedure which requires updating please notify a member

    E-Print Network [OSTI]

    Liley, David

    Page 1 Human Resources Procedures Manual 16 January 2014 Note these procedures are subject team. Human Resources Procedures Manual Contents Section One: Recruitment and Appointment - Recruitment Management - Public Holidays - Industrial Action - Absence on official business - Academic staff additional

  9. Section D - G

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideo »UsageSecretary of Energy Advisory Board FollowSection 3161 SECTION BPART

  10. Coupling Extraction From Off-Shell Cross-sections

    E-Print Network [OSTI]

    Baradhwaj Coleppa; Tanumoy Mandal; Subhadip Mitra

    2014-10-09T23:59:59.000Z

    In this note, we present a novel method of extracting the couplings of a new heavy particle to the Standard Model states. Contrary to the usual discovery process which involves studying the on-shell production, we look at regions away from resonance to take advantage of the simple scaling of the cross-section with the couplings. We apply the procedure to the case of a heavy quark as an illustration.

  11. Introduction Introduction Section 1

    E-Print Network [OSTI]

    of many people. These people share a love for the Deschutes, though they value the river in many different. The voices of many of people throughout the Deschutes subbasin were heard during the subbasin planningIntroduction Introduction Section 1 Now as in the past, The Deschutes River binds the people

  12. POLICY SECTIONS POLICY OFFICE

    E-Print Network [OSTI]

    Minnesota, University of

    POLICY SECTIONS POLICY OFFICE POLICIES FORMS PROCEDURES UNIVERSITY POLICY #12;guide to WRITING POLICIES Administrative policies align opera- tions, set behavior expectations across the University system and communicate policy roles and responsibilities. You, as the policy owner or writer, have the important task

  13. ER 100/200, PP C184/284 GSI Section Notes Energy & Society Section Week 5: Thermodynamics

    E-Print Network [OSTI]

    Kammen, Daniel M.

    . Property Diagrams and Power Cycles V. Additional Material, Terms, and Variables VI. Practice Problems I form to another. As an equation, this is simply: Esystem = 0 = Ein ­ Eout #12;ER 100/200, PP C184 system its change in energy will be the balance between the heat transferred to (Qin) and the work done

  14. SECTION 13-CHEMICAL SAFETY NOTE: Much of the information contained in this Chemical Safety section is duplicated from the

    E-Print Network [OSTI]

    Selmic, Sandra

    Conservation and Recovery Act in 1976, (RCRA) as an amendment to the Solid Waste Disposal Act of 1965"; "the Hazardous and Solid Waste Amendments of 1984 to RCRA; the Emergency Planning and Community Right-to-Know Act, minimization of hazardous waste, on-site treatment and disposal, · properly label, collect, and store

  15. CHP Technical Assistance Partnerships

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube platformBuilding Removal OngoingCERCLA SitesCHICAGO HOUSE PARTIES SHOW heat and

  16. Memorandum from VP Technical Services, Association of Home Appliance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking ofOil & GasTechnicalMeeting withEnergyAnnualInitiatives |- March

  17. Technical Assistance: Frequently Asked Questions | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMayDepartment ofEnergyTeam Cumberland » TeamTechnical

  18. Technical Assistance: Increasing Code Compliance - 2014 BTO Peer Review |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMayDepartment ofEnergyTeam Cumberland » TeamTechnicalDepartment of

  19. Technical Roadmaps for Public Comment | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMayDepartment ofEnergyTeam Cumberland »DepartmentDepartmentTechnical

  20. TECHNICAL BASIS FOR THE NUCLEAR CRITICALITY REPRESENTATIVE ACCIDENT & ASSOCIATED REPRESENTED HAZARDOUS CONDITIONS

    SciTech Connect (OSTI)

    GRIGSBY, J.M.

    2005-03-03T23:59:59.000Z

    Technical Basis Document for the Nuclear Criticality Representative Accident and Associate Represented Hazardous Conditions. Revision 2 of RPP-12371 provides accident consequence estimates for a hypothetical criticality event in an above grade facility (e.g. DBVS, CH-TRUM, and S-109 PWRS). This technical basis document was developed to support RPP-13033, ''Tank Farms Documented Safety Analysis (DSA)'', and describes the risk binning process and the technical basis for assigning risk bins for the nuclear criticality representative accident and associated hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR-level controls.

  1. RADTRAN 6 technical manual.

    SciTech Connect (OSTI)

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O'Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01T23:59:59.000Z

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  2. Boiler MACT Technical Assistance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The FutureCommentsEnergyandapproximately 10|BlueFireBoiler MACT Technical

  3. Final Technical Report

    SciTech Connect (OSTI)

    Sobecky, Patricia A; Taillefert, Martial

    2013-03-29T23:59:59.000Z

    This final technical report describes results and findings from a research project to examine the role of microbial phosphohydrolase enzymes in naturally occurring subsurface microorganisms for the purpose of promoting the immobilization of the radionuclide uranium through the production of insoluble uranium phosphate minerals. The research project investigated the microbial mechanisms and the physical and chemical processes promoting uranium biomineralization and sequestration in oxygenated subsurface soils. Uranium biomineralization under aerobic conditions can provide a secondary biobarrier strategy to immobilize radionuclides should the metal precipitates formed by microbial dissimilatory mechanisms remobilize due to a change in redox state.

  4. SPEAR3 | Technical Documentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited ReleaseWelcome ton n u a l r e p o Technical

  5. Technical Review Panel Report

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy Solar Decathlon | DepartmentEnergyOffice -TechnicalTRP

  6. External Technical Review Report

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial602 1,39732 DOEDepartment of EnergyEric J.ExploringExternal Technical

  7. ARM - Technical Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMForms About Become a UsergovAboutRecoverygovPublicationsTechnical

  8. Mechanical Engineering Department technical abstracts

    SciTech Connect (OSTI)

    Denney, R.M. (ed.)

    1982-07-01T23:59:59.000Z

    The Mechanical Engineering Department publishes listings of technical abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). Overall information about current activities of each of the Department's seven divisions precedes the technical abstracts.

  9. Enabling Technologies for Ceramic Hot Section Components

    SciTech Connect (OSTI)

    Venkat Vedula; Tania Bhatia

    2009-04-30T23:59:59.000Z

    Silicon-based ceramics are attractive materials for use in gas turbine engine hot sections due to their high temperature mechanical and physical properties as well as lower density than metals. The advantages of utilizing ceramic hot section components include weight reduction, and improved efficiency as well as enhanced power output and lower emissions as a result of reducing or eliminating cooling. Potential gas turbine ceramic components for industrial, commercial and/or military high temperature turbine applications include combustor liners, vanes, rotors, and shrouds. These components require materials that can withstand high temperatures and pressures for long duration under steam-rich environments. For Navy applications, ceramic hot section components have the potential to increase the operation range. The amount of weight reduced by utilizing a lighter gas turbine can be used to increase fuel storage capacity while a more efficient gas turbine consumes less fuel. Both improvements enable a longer operation range for Navy ships and aircraft. Ceramic hot section components will also be beneficial to the Navy's Growth Joint Strike Fighter (JSF) and VAATE (Versatile Affordable Advanced Turbine Engines) initiatives in terms of reduced weight, cooling air savings, and capability/cost index (CCI). For DOE applications, ceramic hot section components provide an avenue to achieve low emissions while improving efficiency. Combustors made of ceramic material can withstand higher wall temperatures and require less cooling air. Ability of the ceramics to withstand high temperatures enables novel combustor designs that have reduced NO{sub x}, smoke and CO levels. In the turbine section, ceramic vanes and blades do not require sophisticated cooling schemes currently used for metal components. The saved cooling air could be used to further improve efficiency and power output. The objectives of this contract were to develop technologies critical for ceramic hot section components for gas turbine engines. Significant technical progress has been made towards maturation of the EBC and CMC technologies for incorporation into gas turbine engine hot-section. Promising EBC candidates for longer life and/or higher temperature applications relative to current state of the art BSAS-based EBCs have been identified. These next generation coating systems have been scaled-up from coupons to components and are currently being field tested in Solar Centaur 50S engine. CMC combustor liners were designed, fabricated and tested in a FT8 sector rig to demonstrate the benefits of a high temperature material system. Pretest predictions made through the use of perfectly stirred reactor models showed a 2-3x benefit in CO emissions for CMC versus metallic liners. The sector-rig test validated the pretest predictions with >2x benefit in CO at the same NOx levels at various load conditions. The CMC liners also survived several trip shut downs thereby validating the CMC design methodology. Significant technical progress has been made towards incorporation of ceramic matrix composites (CMC) and environmental barrier coatings (EBC) technologies into gas turbine engine hot-section. The second phase of the program focused on the demonstration of a reverse flow annular CMC combustor. This has included overcoming the challenges of design and fabrication of CMCs into 'complex' shapes; developing processing to apply EBCs to 'engine hardware'; testing of an advanced combustor enabled by CMCs in a PW206 rig; and the validation of performance benefits against a metal baseline. The rig test validated many of the pretest predictions with a 40-50% reduction in pattern factor compared to the baseline and reductions in NOx levels at maximum power conditions. The next steps are to develop an understanding of the life limiting mechanisms in EBC and CMC materials, developing a design system for EBC coated CMCs and durability testing in an engine environment.

  10. Technical assistance for Meharry Medical College Energy Efficiency Project. Final project status and technical report

    SciTech Connect (OSTI)

    NONE

    1996-05-08T23:59:59.000Z

    This report presents the results of a program to provide technical assistance to Meharry Medical College. The purpose of the program is to facilitate Meharry`s effort to finance a campus-wide facility retrofit. The US Department of Energy (USDOE) funded the program through a grant to the Tennessee Department of Economic and Community Development (TECD). The University of Memphis-Technology and Energy Services (UM-TES), under contract to TECD, performed program services. The report has three sections: (1) introduction; (2) project definition, financing, and participants; and (3) opportunities for federal participation.

  11. Scientific and Technical Information Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-10-14T23:59:59.000Z

    The Order establishes requirements and responsibilities for managing DOE's scientific and technical information. Cancels DOE O 241.1. Canceled by DOE O 241.1B.

  12. Technical Services | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    noteworthy for their unique technical capabilities: Central Shops facility performs welding and brazing for high-vacuum applications, machining of radioactive materials, and a...

  13. Hydrogen Storage Technical Team Roadmap

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and technology pathways are impacted by their analyses. These technical teams include Fuel Cells, Fuel Pathway Integration, Hydrogen Delivery, Hydrogen Production, Materials,...

  14. APS Technical Systems Monitoring Page

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Photon Source Technical Systems Accelerator Systems Storage Ring Status for the past 24 hours with real Time of Day User beam delineated. Current, Lifetime, History with 24-hr...

  15. Physics 195a Course Notes

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    that the current is static, and that the net charge density is everywhere zero. Thus, we can take #(x, t) = 0. Inside the solenoid, we have a non­zero magnetic flux: # = # solenoid cross section B · dS. (5) 2 #12 have a situation where the electromagnetic field is zero every­ where outside of a thin cylindrical

  16. MILITARY TECHNICAL ACADEMY Vol. XXII, No. 4

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    #12;MILITARY TECHNICAL ACADEMY Vol. XXII, No. 4 © Military Technical Academy Publishing House Technical Academy of Bucharest, Romania Col. Prof. Eng. IOAN NICOLAESCU, Ph.D. The Military Technical Academy of Bucharest, Romania Prof. Eng. VICTOR-VALERIU PATRICIU, Ph.D. The Military Technical Academy

  17. Joint Technical Operations Team | National Nuclear Security Administra...

    National Nuclear Security Administration (NNSA)

    Render Safe Joint Technical Operations Team Joint Technical Operations Team JTOT Logo NNSA's Joint Technical Operations Team (JTOT) provides specialized technical...

  18. Technical progress report

    SciTech Connect (OSTI)

    NONE

    1996-10-01T23:59:59.000Z

    This report summarizes experimental and theoretical work in basic nuclear physics carried out between October 1, 1995, the closing of our last Progress Report, and September 30, 1996 at the Nuclear Physics Laboratory of the University of Colorado, Boulder, under contracts DE-FG03-93ER-40774 and DE-FG03-95ER-40913 with the United States Department of Energy. The experimental contract supports broadly-based experimental research in intermediate energy nuclear physics. This report includes results from studies of Elementary Systems involving the study of the structure of the nucleon via polarized high-energy positron scattering (the HERMES experiment) and lower energy pion scattering from both polarized and unpolarized nucleon targets. Results from pion- and kaon-induced reactions in a variety of nuclear systems are reported under the section heading Meson Reactions; the impact of these and other results on understanding the nucleus is presented in the Nuclear Structure section. In addition, new results from scattering of high-energy electrons (from CEBAF/TJNAF) and pions (from KEK) from a broad range of nuclei are reported in the section on Incoherent Reactions. Finally, the development and performance of detectors produced by the laboratory are described in the section titled Instrumentation.

  19. EndNote X5 Basics What is EndNote?

    E-Print Network [OSTI]

    will need to choose between two installation types ­ Typical or Custom. If you choose Typical, you. This guide will show you the following basic steps for using EndNote: Opening or creating an EndNote Library Adding bibliographic references or citations to your library Using EndNote with Microsoft Word

  20. Section I: Contract Clause

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideo »UsageSecretary of Energy Advisory Board FollowSection 3161

  1. Implementation Guide for Use in Developing Technical Safety Requirements

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2010-11-03T23:59:59.000Z

    This Guide provides elaboration for the content of TSRs. Section 10 CFR 830.205 of the Nuclear Safety Management rule, requires Department of Energy (DOE) contractors responsible for category 1, 2, and 3 DOE nuclear facilities to develop Technical Safety Requirements (TSRs). These TSRs identify the limitations to each DOE owned, contractor operated nuclear facility based on the documented safety analysis (DSA) and any additional safety requirements established for the facility. Cancels DOE G 423.1-1.

  2. Implementation Guide for Use in Developing Technical Safety Requirements

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2010-11-03T23:59:59.000Z

    This Guide provides elaboration for the content of TSRs. Section 10 CFR 830.205 of the Nuclear Safety Management rule, requires Department of Energy (DOE) contractors responsible for category 1, 2, and 3 DOE nuclear facilities to develop Technical Safety Requirements (TSRs). These TSRs identify the limitations to each DOE owned, contractor operated nuclear facility based on the documented safety analysis (DSA) and any additional safety requirements established for the facility. Does not cancel other directives.

  3. F/H effluent treatment facility. Technical data summary

    SciTech Connect (OSTI)

    Ryan, J P; Stimson, R E

    1984-12-01T23:59:59.000Z

    This document provides the technical basis for the design of the facility. Some of the sections are described with options to permit simplification of the process, depending on the effluent quality criteria that the facility will have to meet. Each part of the F/HETF process is reviewed with respect to decontamination and concentration efficiency, operability, additional waste generation, energy efficiency, and compatability with the rest of the process.

  4. Computer Science Department Technical Report

    E-Print Network [OSTI]

    Shahriar, Selim

    of computing #12;Virtuoso: A System for Virtual Machine Marketplaces Technical Report NWU-CS-04-39 Alex that presents the abstraction of a new raw physical machine on the buyer's network. This report describesComputer Science Department Technical Report NWU-CS-04-39 July 20, 2004 Virtuoso: A System

  5. Technical planning activity: Final report

    SciTech Connect (OSTI)

    Not Available

    1987-01-01T23:59:59.000Z

    In April 1985, the US Department of Energy's (DOE's) Office of Fusion Energy commissioned the Technical Planning Activity (TPA). The purpose of this activity was to develop a technical planning methodology and prepare technical plans in support of the strategic and policy framework of the Magnetic Fusion Program Plan issued by DOE in February 1985. Although this report represents the views of only the US magnetic fusion community, it is international in scope in the sense that the technical plans contained herein describe the full scope of the tasks that are prerequisites for the commercialization of fusion energy. The TPA has developed a well-structured methodology that includes detailed definitions of technical issues, definitions of program areas and elements, statements of research and development objectives, identification of key decision points and milestones, and descriptions of facility requirements.

  6. Technical applications of aerogels

    SciTech Connect (OSTI)

    Hrubesh, L.W.

    1997-08-18T23:59:59.000Z

    Aerogel materials posses such a wide variety of exceptional properties that a striking number of applications have developed for them. Many of the commercial applications of aerogels such as catalysts, thermal insulation, windows, and particle detectors are still under development and new application as have been publicized since the ISA4 Conference in 1994: e.g.; supercapacitors, insulation for heat storage in automobiles, electrodes for capacitive deionization, etc. More applications are evolving as the scientific and engineering community becomes familiar with the unusual and exceptional physical properties of aerogels, there are also scientific and technical application, as well. This paper discusses a variety of applications under development at Lawrence Livermore National Laboratory for which several types of aerogels are formed in custom sizes and shapes. Particular discussions will focus on the uses of aerogels for physics experiments which rely on the exceptional, sometimes unique, properties of aerogels.

  7. LLNL 1981: technical horizons

    SciTech Connect (OSTI)

    Not Available

    1981-07-01T23:59:59.000Z

    Research programs at LLNL for 1981 are described in broad terms. In his annual State of the Laboratory address, Director Roger Batzel projected a $481 million operating budget for fiscal year 1982, up nearly 13% from last year. In projects for the Department of Energy and the Department of Defense, the Laboratory applies its technical facilities and capabilities to nuclear weapons design and development and other areas of defense research that include inertial confinement fusion, nonnuclear ordnances, and particle-beam technology. LLNL is also applying its unique experience and capabilities to a variety of projects that will help the nation meet its energy needs in an environmentally acceptable manner. A sampling of recent achievements by LLNL support organizations indicates their diversity. (GHT)

  8. Authors' Note: Address correspondence to John Byrne, Center for Energy & Environmental Policy, University of Delaware, Newark, DE 19716-7301; e-mail: jbbyrne@udel.edu.

    E-Print Network [OSTI]

    Delaware, University of

    kilowatt-hours, so that increased energy consumption and economic growth can continue. The article doubts part by the energy sector,2 one might hope that social concerns would rival technical ones. But so far81 Authors' Note: Address correspondence to John Byrne, Center for Energy & Environmental Policy

  9. Notice of Intent to Develop DOE O 470.5, Integrating Existing Technical Security Program Requirements

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2013-08-21T23:59:59.000Z

    This memorandum provides justification for the development of one integrated and consolidated set of requirements for the Department of Energy (DOE) Technical Security Program (TSP). This Order will combine the existing necessary requirements from DOE Manual (M) 205.1-3, Telecommunications Security Manual, dated 4-17-2006 and DOE M 470.4-4A chg.1, Information Security Manual, dated 10-12-2010; Section D -Technical Surveillance Countermeasures, into a single DOE Order defining the DOE TSP.

  10. Final Technical Report

    SciTech Connect (OSTI)

    R. L. Champion

    2005-11-29T23:59:59.000Z

    During the contract period, our experimental activities concentrated on ion-surface collision studies, gas phase collisions, the effects of adsorbates on field emission, and the origin of H3O+ in mass spectroscopy. In the area of ion-surface collisions we have measured sputtering yields for negative ions and electrons arising from collisions of ions and photons with a variety of metallic substrates upon which is known amount of adsorbate, which drastically alters the emission characteristics. Kinetic energy distributions of the ejected anions and electrons have also been determined. We have developed a theoretical model which, to a large degree, describes the process and elucidates the role of the adsorbate in the emission processes. In the category of gas-phase collisions, we reported work on proton transfer and ion-molecule reactions for reactants involving H3+ and D3+, measured absolute cross sections for a variety inelastic channels for reactants involving CH4+ and CF4, and measured electron detachment and decomposition cross sections for collisions of SF6- with N2. Additionally, we reported absolute cross sections for various reactive collisions involving collisional decomposition of SF6- and the reactants CF3+ and CHF3. The idea here was to use these measured cross sections to model and understand the salient features of the popular gaseous dielectric, SF6 , and the etching discharge which utilizes CHF3. A somewhat different set of experiments explored the role of adsorbates on the process of electron field emission and the nature and origin of the anomalous cation signal often seen at mass 19 amu in mass spectroscopy. The laboratory collision energies for these experiments ranged from a few electron volts up to 500 eV. The goal of all the studies was to develop an understanding of the collisional dynamics and pathways for systems which are both intellectually interesting and of some potential importance to various areas of applied physics.

  11. Boiler Maximum Achievable Control Technology (MACT) Technical...

    Energy Savers [EERE]

    Boiler Maximum Achievable Control Technology (MACT) Technical Assistance - Fact Sheet, April 2015 Boiler Maximum Achievable Control Technology (MACT) Technical Assistance - Fact...

  12. Building America Residential Energy Efficiency Technical Update...

    Energy Savers [EERE]

    Residential Energy Efficiency Technical Update Meeting: August 2011 Building America Residential Energy Efficiency Technical Update Meeting: August 2011 On this page, you may link...

  13. Low Emission Development Strategies (LEDS): Technical, Institutional...

    Open Energy Info (EERE)

    Strategies (LEDS): Technical, Institutional and Policy Lessons Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Low Emission Development Strategies (LEDS): Technical,...

  14. Independent Oversight Review, Babcock & Wilcox Technical Services...

    Office of Environmental Management (EM)

    Independent Oversight Review, Babcock & Wilcox Technical Services Y-12, LLC - July 2012 Independent Oversight Review, Babcock & Wilcox Technical Services Y-12, LLC - July 2012 July...

  15. Federal Energy Management Program (FEMP) Technical Assistance...

    Energy Savers [EERE]

    Federal Energy Management Program (FEMP) Technical Assistance Request Portal User Guide Federal Energy Management Program (FEMP) Technical Assistance Request Portal User Guide...

  16. Vice President, Engineering and Technical Services

    Broader source: Energy.gov [DOE]

    The Engineering and Technical Services organization is responsible for implementing the transmission capital program, providing technical support for the transmission maintenance program and...

  17. A Technical Databook for Geothermal Energy Utilization

    E-Print Network [OSTI]

    Phillips, S.L.

    1981-01-01T23:59:59.000Z

    A TECHNICAL DATABOOK FOR GEOTHERMAL ENERGY UTILIZATION S.L.Technical Databook for Geothermal Energy Utilization* s. L.Survey, Menlo Park, CA. Geothermal Energy Development, CA.

  18. Space Conditioning Standing Technical Commitee Presentation ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commitee Presentation Space Conditioning Standing Technical Commitee Presentation This presentation outlines the goals of the Space Conditioning Standing Technical ommittee, as...

  19. Technical Consultant Report Template | Department of Energy

    Energy Savers [EERE]

    C3d Technical Consultant Report Template.pdf More Documents & Publications External Independent Review (EIR) Report Template Technical Consultant Contract Evaluation Consultant RFP...

  20. Previous Technical Assistance | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Technical assistance provided to WGAWIEB by the Electricity Market Studies Group of LBNL and The Regulatory Assistance Project (RAP); and More limited technical assistance...

  1. Energy Department Technical Assistance Bolsters Tribal Clean...

    Energy Savers [EERE]

    Technical Assistance Bolsters Tribal Clean Energy Deployment Energy Department Technical Assistance Bolsters Tribal Clean Energy Deployment December 2, 2011 - 3:39pm Addthis The...

  2. Ocean Thermal Extractable Energy Visualization: Final Technical...

    Office of Environmental Management (EM)

    Ocean Thermal Extractable Energy Visualization: Final Technical Report Ocean Thermal Extractable Energy Visualization: Final Technical Report Report about the Ocean Thermal...

  3. High SO{sub 2} removal efficiency testing. Technical progress report, [1 July--30 September 1993

    SciTech Connect (OSTI)

    Blythe, G.

    1993-10-28T23:59:59.000Z

    This document provides a discussion of the technical progress on DOE/PETC project number DE-AC22-92PC91338, {open_quotes}High Efficiency SO{sub 2} Removal Testing{close_quotes}, for the time period 1 July through 30 September, 1993. The project involves testing at six full-scale utility flue gas desulfurization (FGD) systems, to evaluate low capital cost upgrades that may allow these systems to achieve up to 98% SO{sub 2} removal efficiency. The upgrades to be evaluated primarily involve the addition of organic acid buffers to the FGD systems. The {open_quotes}base{close_quotes} project involved testing at the Tampa Electric Company Big Bend station. As of September 1993, all five potential options to the base program had been exercised by DOE, involving testing at the Hoosier Energy Merom Station (Option I), the Southwestern Electric Power Company Pirkey Station (Option II), the PSI Energy Gibson Station (Option III), the Duquesne Light Elrama Station (Option IV), and the New York State Electric and Gas Company Kintigh Station (Option V). As of September 1993, testing has been completed for the base project and for Options 1 and 2, has begun but not been completed for Options III and IV, and has not yet begun for Option V. This document is divided into five sections. After a brief introduction (Section 1), Section 2 (Project Summary) provides a brief overview of the status of technical efforts on this project. Section 3 (Results) summarizes the outcome from these technical efforts during the quarter. Results for each site for which there were significant technical efforts or for which there are updated technical results are discussed in separate subsections. In Section 4 (Plans for the Next Reporting Period) an overview is provided of the technical progress that is anticipated for the fourth quarter of calendar year 1993. Section 5 includes a brief acknowledgement.

  4. Technical Journal The Bendix Technical Journal publishes noteworthy results of

    E-Print Network [OSTI]

    Rathbun, Julie A.

    ADVISORY BOARD E. C. Johnson, Chairman R. E. Esch W. E. Kock L. J. Larsen TECHNICAL CONSULTANTS ALSEP: The Scientific Voice of the Moon L. R. Lewis Some Aspects of ALSEP Structural/Thermal Design J. L

  5. The Independent Technical Analysis Process

    SciTech Connect (OSTI)

    Duberstein, Corey A.; Ham, Kenneth D.; Dauble, Dennis D.; Johnson, Gary E.

    2007-04-13T23:59:59.000Z

    The Bonneville Power Administration (BPA) contracted with the Pacific Northwest National Laboratory (PNNL) to provide technical analytical support for system-wide fish passage information (BPA Project No. 2006-010-00). The goal of this project was to produce rigorous technical analysis products using independent analysts and anonymous peer reviewers. In the past, regional parties have interacted with a single entity, the Fish Passage Center to access the data, analyses, and coordination related to fish passage. This project provided an independent technical source for non-routine fish passage analyses while allowing routine support functions to be performed by other well-qualified entities.

  6. 1 MA 22000 Lesson 31 Notes Section 3.4 Optimization Problems An ...

    E-Print Network [OSTI]

    Bailey, Charlotte M

    2012-03-26T23:59:59.000Z

    Example 6: A farmer wants to enclose two rectangular areas near a river, one for sheep and one for horses. There are 480 yards of fencing available. What is the ...

  7. MA 22000, Lesson 30 Notes Applications of Extrema, Section 6.2

    E-Print Network [OSTI]

    Bailey, Charlotte M

    2014-04-17T23:59:59.000Z

    product is a minimum. Example 5: A farmer wants to enclose two rectangular adjacent to a straight river, one for sheep and one for horses (see picture below).

  8. MA 15910 Lesson 31 Notes Part 2 of section 6.2

    E-Print Network [OSTI]

    Bailey, Charlotte M

    2015-04-20T23:59:59.000Z

    for the two sides adjacent to the current fence costs $4 per meter and materials for ... A business sells 2000 units of a product per month at a price of $10 each.

  9. MA15910 Lesson 27 Notes (part 1 of section 5.4) This lesson covers ...

    E-Print Network [OSTI]

    Bailey, Charlotte M

    2014-11-06T23:59:59.000Z

    learning of the previous lessons and will allow a student to feel more comfortable about the calculus learned so far. GUIDELINES FOR SKETCHING CURVES. 1.

  10. MLC 24-05 Study Note 2nd Edition Section 8.5

    E-Print Network [OSTI]

    SOA

    2007-10-11T23:59:59.000Z

    Continuing Care Retirement Community (CCRC), residents may move among various ... Health Center, Permanently in the Health Center, and Gone. Models.

  11. MA 15910 Lesson 14 Notes Calculus part of text, Section 4.1 (part 2)

    E-Print Network [OSTI]

    Bailey, Charlotte M

    2015-02-24T23:59:59.000Z

    Example 7: Suppose the demand equation (price function) for a business is given by. 2000 80 , q p. = - where p is the price in dollars and q is the number of units ...

  12. MA 220 Lesson 4 Notes, Section 5.4 (algebra part of text) You will ...

    E-Print Network [OSTI]

    Bailey, Charlotte M

    2012-05-17T23:59:59.000Z

    An open-topped box is made by taking a rectangular piece of light card stock that is 24 inches by 36 inches and cutting equal squares from each corner and ...

  13. Note: Sections in normal print are found in part I (algebra half) of the ...

    E-Print Network [OSTI]

    Bailey, Charlotte M

    2012-12-12T23:59:59.000Z

    Problems in bold print are to be completed on paper and may be collected by your ... Problems that are not in bold print will be on MyMathLab and will be numbered 1, 2, 3, etc. .... 39, 41, 43, 45, 47, 49, 51, 53, 57, 59, 61, 77, 90(b,d), 92(

  14. MA 15910 Lesson 10 Notes, Section 3.1 (2 half of text) Part 2 of ...

    E-Print Network [OSTI]

    Bailey, Charlotte M

    2014-09-24T23:59:59.000Z

    equivalent expression. Direct substation before simplifying may yield 0/0. 2. 3. 3. 3 .... Let C(t) be the cost to mail a letter in the year t. Find the following. (You will ...

  15. Workshop Notes from ""Compressed Natural Gas and Hydrogen Fuels...

    Broader source: Energy.gov (indexed) [DOE]

    Workshop Notes from ""Compressed Natural Gas and Hydrogen Fuels: Lessons Learned for the Safe Deployment of Vehicles"" Workshop, December 10-11, 2009 Workshop Notes from...

  16. Technical Appendix for Development for Modified Streamflows 1928-1989 : Columbia River & Coastal Basin.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration; A.G. Crook Company

    1993-06-01T23:59:59.000Z

    The report ``Adjusted Streamflow and Storage 1928-1989`` contains listings of historical flows for the sites in the Columbia River and Coastal Basins. This section of the Technical Appendix provides for the site specific procedures used to determine those historical flows. The study purpose, authority, and definitions are given in the main report. The purpose of this section of the Technical Appendix is to document the computational procedures used at each of the project sites to develop historical flows for the period July 1928--September 1989.

  17. GEM Technical Design Report

    SciTech Connect (OSTI)

    Not Available

    1993-07-31T23:59:59.000Z

    The GEM collaboration was formed in June 1991 to develop a major detector for the SSC. The primary physics objectives of GEM are those central to the motivation for the SSC, to study high p{sub T} physics - exemplified by the search for Higgs bosons - and to search for new physics beyond the standard model. The authors present in this Technical Design Report (TDR) a detector with broad capabilities for the discovery and subsequent study of electroweak symmetry breaking, the origin of mass and flavor, and other physics requiring precise measurements of gammas, electrons, and muons - hence the name, GEM. In addition, as a design goal, they have taken care to provide the robustness needed to do the physics that requires high luminosity. Finally, good coverage and hermeticity allow the detection of missing transverse energy, E{sub T}. The GEM design emphasizes clean identification and high resolution measurement of the primary physics signatures for high p{sub T} physics. The approach is to make precise energy measurements that maximize the sensitivity to rare narrow resonances, to detect the elementary interaction products (quarks, leptons, and photons), and to build in the features required to reduce backgrounds.

  18. Final Technical Report

    SciTech Connect (OSTI)

    Stoessel, Chris

    2013-11-13T23:59:59.000Z

    This project developed a new high-performance R-10/high SHGC window design, reviewed market positioning and evaluated manufacturing solutions required for broad market adoption. The project objectives were accomplished by: identifying viable technical solutions based on modeling of modern and potential coating stacks and IGU designs; development of new coating material sets for HM thin film stacks, as well as improved HM IGU designs to accept multiple layers of HM films; matching promising new coating designs with new HM IGU designs to demonstrate performance gains; and, in cooperation with a window manufacturer, assess the potential for high-volume manufacturing and cost efficiency of a HM-based R-10 window with improved solar heat gain characteristics. A broad view of available materials and design options was applied to achieve the desired improvements. Gated engineering methodologies were employed to guide the development process from concept generation to a window demonstration. The project determined that a slightly de-rated window performance allows formulation of a path to achieve the desired cost reductions to support end consumer adoption.

  19. FINAL TECHNICAL REPORT

    SciTech Connect (OSTI)

    STEFAN VASILE; ZHENG LI

    2010-06-17T23:59:59.000Z

    High-resolution tracking detectors based on Active Pixel Sensor (APS) have been valuable tools in Nuclear Physics and High-Energy Physics research, and have contributed to major discoveries. Their integration time, radiation length and readout rate is a limiting factor for the planed luminosity upgrades in nuclear and high-energy physics collider-based experiments. The goal of this program was to demonstrate and develop high-gain, high-resolution tracking detector arrays with faster readout, and shorter radiation length than APS arrays. These arrays may operate as direct charged particle detectors or as readouts of high resolution scintillating fiber arrays. During this program, we developed in CMOS large, high-resolution pixel sensor arrays with integrated readout, and reset at pixel level. Their intrinsic gain, high immunity to surface and moisture damage, will allow operating these detectors with minimal packaging/passivation requirements and will result in radiation length superior to APS. In Phase I, we designed and fabricated arrays with calorimetric output capable of sub-pixel resolution and sub-microsecond readout rate. The technical effort was dedicated to detector and readout structure development, performance verification, as well as to radiation damage and damage annealing.

  20. 1. WELDING SHALL BE PERFORMED IN ACCORDANCE WITH ASME SECTION IX. NO CODE STAMP REQUIRED.

    E-Print Network [OSTI]

    McDonald, Kirk

    NOTES 1. WELDING SHALL BE PERFORMED IN ACCORDANCE WITH ASME SECTION IX. NO CODE STAMP REQUIRED. 2. ALL WELDS SHALL BE DYE PENETRANT INSPECTED. NO RADIOGRAPHY REQUIRED. 3. MATERIAL CERTIFICATIONS HOSE W/TUBING ENDS, 13.5 FACE-TO-FACE N/A 3 1 swagelok 1.0 pipe weld connector SS - 316L SWAGELOK PIPE

  1. 1. WELDING TO BE PERFORMED IN ACCORDANCE WITH ASME SECTION IX. NO CODE STAMP REQUIRED.

    E-Print Network [OSTI]

    McDonald, Kirk

    45° W-1 3/16 G NOTES 1. WELDING TO BE PERFORMED IN ACCORDANCE WITH ASME SECTION IX. NO CODE STAMP AND TOLERANCES PER ASME Y14.5M 3. MACHINED FINISH 125 MICRO- INCHES RMS 4. CONCENTRICITY .010 TIR 5. MACHINED

  2. A Coupled Approach for Plasma-Based Flow Control Simulations of Wing Sections

    E-Print Network [OSTI]

    Roy, Subrata

    a role in momentum coupling, though as noted in Ref. 10 there is no significant heating of the airA Coupled Approach for Plasma-Based Flow Control Simulations of Wing Sections Datta V. Gaitonde Vehicles Directorate Kettering University Air Force Research Laboratory Flint, MI 48504 Wright

  3. Final Technical Report

    SciTech Connect (OSTI)

    Alexander Pigarov

    2012-06-05T23:59:59.000Z

    This is the final report for the Research Grant DE-FG02-08ER54989 'Edge Plasma Simulations in NSTX and CTF: Synergy of Lithium Coating, Non-Diffusive Anomalous Transport and Drifts'. The UCSD group including: A.Yu. Pigarov (PI), S.I. Krasheninnikov and R.D. Smirnov, was working on modeling of the impact of lithium coatings on edge plasma parameters in NSTX with the multi-species multi-fluid code UEDGE. The work was conducted in the following main areas: (i) improvements of UEDGE model for plasma-lithium interactions, (ii) understanding the physics of low-recycling divertor regime in NSTX caused by lithium pumping, (iii) study of synergistic effects with lithium coatings and non-diffusive ballooning-like cross-field transport, (iv) simulation of experimental multi-diagnostic data on edge plasma with lithium pumping in NSTX via self-consistent modeling of D-Li-C plasma with UEDGE, and (v) working-gas balance analysis. The accomplishments in these areas are given in the corresponding subsections in Section 2. Publications and presentations made under the Grant are listed in Section 3.

  4. Istanbul Technical University Istanbul, Turkey

    E-Print Network [OSTI]

    Duchowski, Andrew T.

    and ocean engineering Faculty of science and letters Faculty of management Faculty of Aeronautics Engineering Shipbuilding and Ocean Engineering Mathematics Engineering Physics Engineering Chemistry distinguished in Turkey with its engineering and architecture education. Istanbul Technical University

  5. Offshoring and Directed Technical Change

    E-Print Network [OSTI]

    Acemoglu, Daron

    2012-11-24T23:59:59.000Z

    To study the short-run and long-run implications on wage inequality, we introduce directed technical change into a Ricardian model of offshoring. A unique final good is produced by combining a skilled and an unskilled ...

  6. Technical challenges for dismantlement verification

    SciTech Connect (OSTI)

    Olinger, C.T.; Stanbro, W.D.; Johnston, R.G.; Nakhleh, C.W.; Dreicer, J.S.

    1997-11-01T23:59:59.000Z

    In preparation for future nuclear arms reduction treaties, including any potential successor treaties to START I and II, the authors have been examining possible methods for bilateral warhead dismantlement verification. Warhead dismantlement verification raises significant challenges in the political, legal, and technical arenas. This discussion will focus on the technical issues raised by warhead arms controls. Technical complications arise from several sources. These will be discussed under the headings of warhead authentication, chain-of-custody, dismantlement verification, non-nuclear component tracking, component monitoring, and irreversibility. The authors will discuss possible technical options to address these challenges as applied to a generic dismantlement and disposition process, in the process identifying limitations and vulnerabilities. They expect that these considerations will play a large role in any future arms reduction effort and, therefore, should be addressed in a timely fashion.

  7. Facility worker technical basis document

    SciTech Connect (OSTI)

    SHULTZ, M.V.

    2003-08-28T23:59:59.000Z

    This technical basis document was developed to support the Tank Farm Documented Safety Analysis (DSA). It describes the criteria and methodology for allocating controls to hazardous conditions with significant facility work consequence and presents the results of the allocation.

  8. EPA's Financial and Technical Resources

    E-Print Network [OSTI]

    Perea, S. M.

    2011-01-01T23:59:59.000Z

    EPA?s Financial and Technical Resources Suzanna M. Perea, EPA Region VI CATEE Conference November 9, 2011 EPA?s Primary Role Where and how communities are built has a major impact on the environment and on public health. Many programs... are aimed at supporting activities that build more sustainable communities. Protecting Human Health and the Environment Smart Growth Implementation Assistance (SGIA) Grants http://www.epa.gov/smartgrowth/sgia.htm Building Blocks Technical...

  9. Guam Initial Technical Assessment Report

    SciTech Connect (OSTI)

    Baring-Gould, I.; Conrad, M.; Haase, S.; Hotchkiss, E.; McNutt, P.

    2011-04-01T23:59:59.000Z

    Under an interagency agreement, funded by the Department of Interior's (DOI) Office of Insular Affairs (OIA), the National Renewable Energy Laboratory (NREL) was tasked to deliver technical assistance to the island of Guam by conducting an island initial technical assessment that would lay out energy consumption and production data and establish a baseline. This assessment will be used to conduct future analysis and studies by NREL that will estimate energy efficiency and renewable energy potential for the island of Guam.

  10. Notes on Slovene and Slavic Etymology

    E-Print Network [OSTI]

    Hamp, Eric P.

    1997-01-01T23:59:59.000Z

    The notes present critiques of F. Bezlaj's Etymological Dictionary of the Slovene Language and new proposals for the etymology of the words krma 'animal feed', Krma (toponym), kašelj 'cough', ogenj 'flame, fire', and oglje 'charcoal'....

  11. A. La Rosa Lecture Notes APPLIED OPTICS

    E-Print Network [OSTI]

    A. La Rosa Lecture Notes APPLIED OPTICS _______________________________________________________________________________ The variational principle and ray propagation The ray equation Propagation on a lenslike media: GRIN lenses Ref: A. Yariv and P. Yeh, "Photonics," Oxford University Press. Chapter 2. The ray equation obtained from

  12. A. La Rosa Lecture Notes APPLIED OPTICS

    E-Print Network [OSTI]

    _______________________________________________________________________________ Rays and Optical beams Ref: A. Yariv and P. Yeh, "Photonics," Oxford University Press. Chapter 2. IA. La Rosa Lecture Notes APPLIED OPTICS. Ray Matrices I.A Special cases Case: Propagation through a thin lens Case: Propagation through

  13. Data Mining and Knowledge Discovery: Practice Notes

    E-Print Network [OSTI]

    Novak, Petra Kralj

    1 Data Mining and Knowledge Discovery: Practice Notes Petra Kralj Novak Petra.Kralj.Novak@ijs.si and exam · 2013/1/15: Written exam, seminar proposal discussion · 2013/2/12: Data mining seminar

  14. Data Mining and Knowledge Discovery: Practice Notes

    E-Print Network [OSTI]

    Novak, Petra Kralj

    1 Data Mining and Knowledge Discovery: Practice Notes Petra Kralj Novak Petra.Kralj.Novak@ijs.si on Weka 3: Descriptive data mining ­ Discussion about seminars and exam · 2013/12/16: Written exam

  15. Lecture Notes in Secret Sharing Carles Padro

    E-Print Network [OSTI]

    Lecture Notes in Secret Sharing Carles Padr´o Nanyang Technological University, Singapore Version 2.7 Exercises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2 Secret Sharing.2 Secret Sharing Schemes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.3 Threshold Secret

  16. Technical note Some evaluations of basic nodal-like schemes for a selection of classical problems

    E-Print Network [OSTI]

    Siewert, Charles E.

    of the cylinder) of radius R written (Bell and Glasstone, 1979) as ð1 À l2 Þ1=2 cos / @ @r À 1 r sin / @ @/ þ 1

  17. Technical note 12406 Alignment of Platform Three-circle X-ray Diffractometer General suggestion

    E-Print Network [OSTI]

    Meagher, Mary

    shutter with SMART (or APEX) 19.) The GM meter should read a positive MV reading a. (negative if dual plug into the outlet 7.) Plug the dual plug into multi-meter 8.) Turn dial on multi-meter to 200mv DC volts (meter will read 0.0) 9.) Place Radiation meter below collimator on platform and turn on 10.) With the service key

  18. BNL/SNS TECHNICAL NOTE N. Tsoupas, J. Brodowski, Y. Y. Lee, and J. Tuozzolo

    E-Print Network [OSTI]

    Preliminary Study of the Magnetic Field of the SNS Lambertson-Type Extraction Septum Magnet #12;1 Preliminary Study of the Magnetic Field of the SNS Lambertson-type Extraction Septum Magnet N. Tsoupas, J. Browdoski that is generated by the SNS Lambertson-type extraction magnet. The study is focused on the following items: a

  19. Treatment technologies for hazardous ashes generated from possible incineration of navy waste. Technical note

    SciTech Connect (OSTI)

    Torres, T.

    1990-10-01T23:59:59.000Z

    The Navy recognizes that thermal treatment of Navy hazardous wastes (HW) should, under the terms of the Resource Conservation and Recovery Act of 1976, be avoided. Combustion waste disposal may nonetheless become unavoidable in certain cases, even after all possible process enhancements that avoid HW production are implemented. Even then, some toxic constituents that may be present in the waste will not be destroyed by incineration and will persist in the ash residue produced by incineration. Such incinerator ashes will have to be disposed of in HW landfills. The Navy is thus evaluating methods of treatment of such ash to remove or immobilize the toxic constituents that persist following incineration in order to render the waste treatment residue nonhazardous. Appropriate technology identified in this work can be applied to ash produced by HW combuster operated by the Navy, if any, or be required for ash produced by commercial generators handling Navy HWs.

  20. BNL/SNS TECHNICAL NOTE P. He, H.C. Hseuh, R. Todd, BNL

    E-Print Network [OSTI]

    samples of beam chamber material were exposed to air and again after electron and ion beam bombardment Measurements for TiN Coating on the Stainless Steel of SNS Accumulator Ring Vacuum Chamber #12;SECONDARY CHAMBER* P. He , H.C. Hseuh, R. Todd Collider-Accelerator Department, BNL, Upton, NY 11973, USA B

  1. BNL/SNS TECHNICAL NOTE J. Beebe-Wang, C. R. Prior

    E-Print Network [OSTI]

    , a mismatched injection could result in an undesirable transverse emittance growth. However, Twiss parameter where Di, Ei and Ji are the values of Twiss function in the transfer line at the injection point of Twiss function in the ring at the injection point. In terms of normalized variables )4('' )3(, xx x x x

  2. SOLID WOOD PRODUCTS I TECHNICAL NOTE CALIBRATION OF MOISTURE METERS FOR

    E-Print Network [OSTI]

    tanks, and boats, the kiln and allowed to cool. They were content (MC) of wood. However, the cor and electrical resis- cypress have been supplied by moisture handled or conditioned. One moisture tance

  3. Technical Note Improved Optimization and Visualization of Drilling Directions for Rock

    E-Print Network [OSTI]

    Haneberg, William C.

    INTRODUCTION Characterization of planar discontinuities such as bedding, joints, and faults is an essential control in situ block sizes that can be important when assessing the adequacy of potential riprap or armor-stone sources, the susceptibility of bridge foundations to scour during floods, and the sizes of rock blocks

  4. Technical Note Solution of the GraetzBrinkman problem with the

    E-Print Network [OSTI]

    Valkó, Peter

    of energy is counter-balanced by keeping the wall temperature at the ambient value. We derive a correlation

  5. Technical Note One-dimensional, steady vertical flow in a layered

    E-Print Network [OSTI]

    as for evaporation from shallow water tables. For steady state conditions Darcy's law gives f /' dh z - zi = - (1) h based on equation (I). The emphasis will be on analytical expressions, although the numerical evaluation of equation (

  6. BNL/SNS TECHNICAL NOTE H. Ludewig, N. Catalan-Lasheras, N. Simos, A. Mallen,

    E-Print Network [OSTI]

    Machine Shutdown #12;PRELIMINARY ESTIMATES OF THE RESmUAL DOSE IN THE VICINITY OF THE FIRST DOUBLET FOLLOWING MACHINE SHUTDOWN H. Ludewig, No Catalan-Lasheras, No Simos, A. Mallen, JoWalker, JoWei, and M. Todosow. Brookhaven National Laboratory, Upton, New York, USA. 11973. Introduction In this report

  7. Technical Note: Evaluation of Effective Microorganisms (EM) In Solid Waste Management

    E-Print Network [OSTI]

    Sekeran, V.; Balaji, C.; Bhagavathipushpa, T.

    2005-01-01T23:59:59.000Z

    Microorganisms (EM) In Solid Waste Management V. Sekeran C.is the treatment, disposal and/or recycling of solid wastes.Generally solid waste from a municipality consists of

  8. Technical note Use of mixed ion exchange resin and the denitrifier method to determine isotopic

    E-Print Network [OSTI]

    Templer, Pamela

    as water passes over them (e.g., Van Dam et al.,1991; Fenn et al., 2002; Simkin et al., 2004.g., Simkin et al., 2004) and therefore resin collectors can remain in the field for a longer period of time

  9. Technical Note Intracoronary MR Imaging Using a 0.014-Inch MR

    E-Print Network [OSTI]

    Atalar, Ergin

    -Guided Coronary Interventions Bensheng Qiu, PhD,1,2 Fabao Gao, MD, PhD,1,3 Parag Karmarkar, MS,1 Ergin Atalar, Ph, thus, generate intracoronary MR imaging with balloon in- flation. Key Words: MRI; coronary intervention; MR imaging guidewire; percutaneous transluminal coronary angio- plasty (PTCA) J. Magn. Reson. Imaging

  10. BNL/SNS TECHNICAL NOTE P. He, H.C. Hseuh, R. Todd

    E-Print Network [OSTI]

    ;______________________________________________ * Work performed under the auspices of the U.S. Department of Energy # SNS Collaboration in ORNL, LANL developed at BNL. The facility produces thinknesses up to 10 microns titanium or titanium-nitride by means by the pulsed magnetic field would cause destructive sparks along the coating. Titanium, Titanium

  11. Electrical Engineering Technical Electives Course Number Course Title Credits Noted Prerequisites Terms

    E-Print Network [OSTI]

    Schumacher, Russ

    check course for details F,S,SS GRAD510 Fundamentals of High Performance Computing 3 S GRAD511 High Performance Computing and Visualization 3 GRAD510 F MATH419 Introduction to Complex Variables 3 MATH 261 F

  12. Technical Note PR-TN-2004/00370 Issued: 05/2004

    E-Print Network [OSTI]

    de Vries, Arjen P.

    in the existing Amsterdam Hypermedia Model (AHM) and Adaptive Hypermedia Application Model (AHAM). Although we

  13. TECHNICAL NOTES Application of a Routing Model for Detecting Channel Flow

    E-Print Network [OSTI]

    Szilagyi, Jozsef

    Jozsef Szilagyi1 ; Nicholas Pinter2 ; and Rob Venczel3 Abstract: The discrete linear cascade model DLCM

  14. DIMACS Technical Report 9926 A short Note on Linear Autarkies, qHorn Formulas and

    E-Print Network [OSTI]

    Autarky x leads to an autark partial assignment of the formula involved by rounding. To see this, let

  15. TECHNICAL NOTES Closed-Form Stiffness Matrix for the Four-Node

    E-Print Network [OSTI]

    Vecchio, Frank J.

    -form stiffness matrices in finite-element analysis has long been recognized, while the con- ventional numerical presents closed-form finite-element stiffness formulations for the four-node quadrilateral element and prestrain effects, the developed closed-form element stiffness can be incorporated into a nonlinear finite-element

  16. d Technical Note RING ARRAY TRANSDUCERS FOR REAL-TIME 3-D IMAGING OF AN ATRIAL

    E-Print Network [OSTI]

    Smith, Stephen

    with a matching layer. Real-time 3-D rendered images of an en face view of a Gore Helex septal occluder in a water-Yakub and Oralkan 2011). Atrial septal defects (ASD) comprise up to 7% of total congenital heart lesions and as much as 25% of congenital heart disease in adults (Kaplan 1993). ASDs may go undetected for decades

  17. Technical Note DCM for complex-valued data: Cross-spectra, coherence and phase-delays

    E-Print Network [OSTI]

    Moran, Rosalyn

    -series, under ergodic assumptions. It is based on a linearization of mean-field models of coupled dynamical-spectral densities and thereby access hidden parameters governing the data- generating process (e.g., coupling model inversion procedures for the Dynamic Causal Modeling (DCM) of complex-valued data. Modeling

  18. Technical Note: On the Use of Nudging for Aerosol-Climate Model Intercomparison Studies

    SciTech Connect (OSTI)

    Zhang, Kai; Wan, Hui; Liu, Xiaohong; Ghan, Steven J.; Kooperman, G. J.; Ma, Po-Lun; Rasch, Philip J.; Neubauer, David; Lohmann, U.

    2014-08-26T23:59:59.000Z

    Nudging is an assimilation technique widely used in the development and evaluation of climate models. Con- straining the simulated wind and temperature fields using global weather reanalysis facilitates more straightforward comparison between simulation and observation, and reduces uncertainties associated with natural variabilities of the large-scale circulation. On the other hand, the artificial forcing introduced by nudging can be strong enough to change the basic characteristics of the model climate. In the paper we show that for the Community Atmosphere Model version 5, due to the systematic temperature bias in the standard model and the relatively strong sensitivity of homogeneous ice nucleation to aerosol concentration, nudging towards reanalysis results in substantial reductions in the ice cloud amount and the impact of anthropogenic aerosols on longwave cloud forcing. In order to reduce discrepancies between the nudged and unconstrained simulations and meanwhile take the advantages of nudging, two alternative experimentation methods are evaluated. The first one constrains only the horizontal winds. The second method nudges both winds and temperature, but replaces the long-term climatology of the reanalysis by that of the model. Results show that both methods lead to substantially improved agreement with the free-running model in terms of the top-of-atmosphere radiation budget and cloud ice amount. The wind-only nudging is more convenient to apply, and provides higher correlations of the wind fields, geopotential height and specific humidity between simulation and reanalysis. This suggests that nudging the horizontal winds but not temperature is a good strategy, especially for studies that involve both warm and cold clouds.

  19. Computational Science Technical Note CSTN-172 Plasma Visualization in Parallel using Particle Systems on Graphical Processing

    E-Print Network [OSTI]

    Hawick, Ken

    as particle systems that emit light are important in many interesting components of games, computer animated = {April}, publisher = {WorldComp}, institution = {Computer Science, Massey University, Auckland, New Ken Hawick, Computer Science, Massey University, Albany, North Shore 102-904, Auckland, New Zealand

  20. Glossary on the environmental impact of a nuclear war. Technical note

    SciTech Connect (OSTI)

    Verstraete, M.M.

    1986-02-01T23:59:59.000Z

    The glossary defines a number of words, expressions, and acronyms used in the description of the impact of nuclear war on the environment, and associated issues. Selected additional words related to the problems of armaments, disarmament, and nuclear war in general were also added for convenience, although terms and expressions specifically related to the medical aspects of the problem were not included. The glossary is an enlarged and updated version of the glossary that was published as part of the SCOPE-Enuwar study on the same subject, and published by Wiley (Pittock et al., 1986).

  1. TECHNICAL NOTES Long-Term Behavior of Water Content and Density

    E-Print Network [OSTI]

    instrumented compacted earthen liner was constructed at the Illinois State Geological Survey facility lA, Ft. Walton Beach, FL 32548. 2Geochemist, Illinois State Geological Survey, 615 E. Peabody Dr

  2. Technical note Degradation of the bond between old and new mortar under cyclic shear

    E-Print Network [OSTI]

    Chung, Deborah D.L.

    may occur during static or cyclic loading. In parti- cular, cyclic loading may lead to fatigue of a condensed naphthalene sulfonic acid. No coarse aggregate was used. A Hobart mixer with a flat beater

  3. NRAO Electronics Division Technical Note 179 Ground Loops in SIS Bias Circuits

    E-Print Network [OSTI]

    Groppi, Christopher

    the possibility of static discharge damaging the mixer when it is connected to the floating bias supply. 3 SIS mixer, and it may be difficult in practice to obtain a stable bias voltage using a high value receiver, in which one end of the junction is connected to the grounded mixer block, such a resistor can

  4. Summary Notes from 3 October 2007 Generic Technical Issue Discussion on Concentration Averaging

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssues DOE's NuclearSpurringSteamDepartment4SuitlandOctober 12, 20113

  5. Summary Notes from 5 March 2008 Generic Technical Issue Discussion on Long-Term Grout Performance

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssues DOE's NuclearSpurringSteamDepartment4SuitlandOctober 12, 201136,

  6. Summary Notes from the 10 July 2007 Generic Technical Issue Discussion on Point of Compliance

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssues DOE's NuclearSpurringSteamDepartment4SuitlandOctober 12,

  7. L3: RTM.MCH.P6.02 Technical Note RNSD-00-

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electron beamJoin2015JustKateKent5 BC Wa SANDIA-a

  8. CEM_Metrics_and_Technical_Note_7_14_10.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof Energy FutureDepartmentCAIRS RegistrationPhilipCEA -

  9. United States Environmental Protection Agency Radiation Office of Radiation Programs Technical Note

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA groupTuba City, Arizona, DisposalFourthN V4100 DOE/EA-1452D E P AEnvironmental

  10. Final Technical Report

    SciTech Connect (OSTI)

    Joel Walls, Richard Uden, Scott Singleton, Rone Shu, Gary Mavko

    2005-04-12T23:59:59.000Z

    Using current methods, oil and gas in the subsurface cannot be reliably predicted from seismic data. This causes domestic oil and gas fields to go undiscovered and unexploited, thereby increasing the need to import energy. The general objective of this study was to demonstrate a simple and effective methodology for estimating reservoir properties (gas saturation in particular, but also including lithology, net to gross ratios, and porosity) from seismic attenuation and other attributes using P and S-waves. Phase I specific technical objectives: • Develop Empirical or Theoretical Rock Physics Relations for Qp and Qs • Create P-wave and S-wave Synthetic Seismic Modeling Algorithms with Q • Compute P-wave and S-wave Q Attributes from Multi-component Seismic Data All objectives defined in the Phase I proposal were accomplished. During the course of this project, a new class of seismic analysis was developed based on compressional and shear wave inelastic rock properties (attenuation). This method provides a better link between seismic data and the presence of hydrocarbons. The technique employs both P and S-wave data to better discriminate between attenuation due to hydrocarbons versus energy loss due to other factors such as scattering and geometric spreading. It was demonstrated that P and S attenuation can be computed from well log data and used to generate synthetic seismograms. Rock physics models for P and S attenuation were tested on a well from the Gulf of Mexico. The P and S-wave Q attributes were computed on multi-component 2D seismic data intersecting this well. These methods generated reasonable results, and most importantly, the Q attributes indicated gas saturation.

  11. Final Technical Report

    SciTech Connect (OSTI)

    Juan Camilo Serrano

    2011-12-16T23:59:59.000Z

    New and novel material and process technologies applied in wind blade designs and production are critical to increasing the competitiveness of wind power generation against traditional sources of energy. In this project, through collaboration between PPG Industries and MAG Industrial Automation Systems, the potential of using automated manufacturing for the production of fiber glass composite wind blades was evaluated from both technical and economic points of view. Further, it was demonstrated that by modifying the standard blade raw material forms through the use of cost effective pre-impregnated rovings coupled with using an automated fiber placement machine to lay up the parts, it is possible to produce state of the art composite laminates with significantly improved mechanical performance and with higher processing rates than standard blade production technology allows for today, thereby lowering the cost of energy over turbine blades made using traditional processes and materials. In conformity with the scope of work of the submitted proposal, the project team completed each task and documented and reported its findings on the appropriate quarterly report submitted to the DOE project team. The activities and this report are divided into 5 subtasks: (1) Material Investigation - Reviews traditional materials and key specifications and testing methods; (2) Manufacturing and Automation - Identifies new candidate material forms and automated layup processes; (3) Process Development - Performs trials of candidate materials and processes; (4) Predictive Analysis - Assesses impact of new material forms and automated processes on a model blade design; and (5) Feasibility Assessment - Compares traditional manufacturing processes and materials to new candidate material forms and automated processes.

  12. Final technical report

    SciTech Connect (OSTI)

    Johnson, C.; Long, S.; Li, Binsheng; Lamke, A.J.

    1994-07-01T23:59:59.000Z

    The overall goal of the contract is to provide general support and advice to the DOE, Office of Fossil Energy (DOE/EF) on the opportunities for coal and Clean Coal Technology trade in the Asia-Pacific region. The report which follows is divided into six subsections, each pertaining to separate subtasks the U.S. Department of Energy requested. Subtask A includes two reports, one which outlines important coal and clean coal technology news events which occurred during the second half of 1993, and another which outlines the potential for Clean Coal Technology in the Asia-Pacific Region. Subtask B and the first paper in Subtask C contain advisories and briefing papers that present and explain the coal, electricity and Clean Coal Technology situation in China. The second paper in Subtask C is an overview of the coal supply, demand and trade situation in the Asian region with coal projections to the year 2010. Subtask D is an overview of meetings with Asian energy and policy representatives which were carried out to (1) gather key information relevant to this contract, and (2) examine areas for closer cooperation on important coal/CCT-related energy issues. The tasks listed in the contract proposal as Subtasks E and F are summarized in respective sections of this report. Subtask E specifies the activities carried out under the APEC Experts` Group on Clean Coal Technologies, and Subtask F explains the work done by the Coal Project in building contacts and working relationships with key energy and technology planners in China (including The State Science and Technology Commission, the Ministry of Electric Power and Tsinghua University, and the State Planning Commission). The Subtask E section also includes activities to develop and strengthen the role of the APEC Experts Group on Clean Coal Activities.

  13. Technical basis document for the steam intrusion from interfacing systems accident

    SciTech Connect (OSTI)

    GOETZ, T.G.

    2003-03-21T23:59:59.000Z

    This technical basis document was developed to support the Documented Safety Analysis (DSA) and describes the risk binning process and the technical basis for assigning risk bins for the steam intrusion from interfacing systems representative accident and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous conditions based on an evaluation of the frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR-level controls. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, ''Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses'', as described in this report.

  14. Technical basis for the nuclear criticality representative accident and associated represented hazardous conditions

    SciTech Connect (OSTI)

    CARSON, D.M.

    2003-03-20T23:59:59.000Z

    This technical basis document was developed to support the Tank Farms Documented Safety Analysis (DSA), and describes the risk binning process and the technical basis for assigning risk bins for the nuclear criticality representative accident and associated hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR-level controls. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, ''Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses'', as described in this report.

  15. Technical basis for the tank bump representative accident and associated hazardous conditions

    SciTech Connect (OSTI)

    WILLIAMS, J.C.

    2003-03-21T23:59:59.000Z

    This technical basis document was developed to support the Tank Farms Documented Safety Analysis (DSA) and describes the risk binning process and the technical basis for assigning risk bins for the tank bump representative accident and associated hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and/or technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous conditions based on an evaluation of the frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR-level controls. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, ''Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports'', as described in this report.

  16. EPAct 2005 Section 1817 Public Comments | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube|6721 Federal Register / Vol.6: RecordJune 20,in the101 EPAEnergy Section

  17. SECTION J, APPENDIX A - SOW

    National Nuclear Security Administration (NNSA)

    and improve the industrial competitiveness and national security of the United States. Section J, Appendix A, Page 19 (Replaced Mod 002; Modified Mod 016; Replaced Mod...

  18. SECTION J, APPENDIX A - SOW

    National Nuclear Security Administration (NNSA)

    and improve the industrial competitiveness and national security of the United States. Section J, Appendix A, Page 17 Request for Proposal No. DE-SOL-0007749 CHAPTER...

  19. ENERGIES RENOVABLES NOTES FINALS 2006 COGNOMS, NOM ASSISTNCIA TREBALL NOTA

    E-Print Network [OSTI]

    Batiste, Oriol

    ENERGIES RENOVABLES NOTES FINALS 2006 COGNOMS, NOM ASSISTÃ?NCIA TREBALL NOTA ALCOVERRO VIDAL, MARCEL

  20. RELEASE OF DRIED RADIOACTIVE WASTE MATERIALS TECHNICAL BASIS DOCUMENT

    SciTech Connect (OSTI)

    KOZLOWSKI, S.D.

    2007-05-30T23:59:59.000Z

    This technical basis document was developed to support RPP-23429, Preliminary Documented Safety Analysis for the Demonstration Bulk Vitrification System (PDSA) and RPP-23479, Preliminary Documented Safety Analysis for the Contact-Handled Transuranic Mixed (CH-TRUM) Waste Facility. The main document describes the risk binning process and the technical basis for assigning risk bins to the representative accidents involving the release of dried radioactive waste materials from the Demonstration Bulk Vitrification System (DBVS) and to the associated represented hazardous conditions. Appendices D through F provide the technical basis for assigning risk bins to the representative dried waste release accident and associated represented hazardous conditions for the Contact-Handled Transuranic Mixed (CH-TRUM) Waste Packaging Unit (WPU). The risk binning process uses an evaluation of the frequency and consequence of a given representative accident or represented hazardous condition to determine the need for safety structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls. A representative accident or a represented hazardous condition is assigned to a risk bin based on the potential radiological and toxicological consequences to the public and the collocated worker. Note that the risk binning process is not applied to facility workers because credible hazardous conditions with the potential for significant facility worker consequences are considered for safety-significant SSCs and/or TSR-level controls regardless of their estimated frequency. The controls for protection of the facility workers are described in RPP-23429 and RPP-23479. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses, as described below.

  1. Technical Support and Transfer of Geothrmal Technical Knowledge and Information

    SciTech Connect (OSTI)

    John W. Lund

    2007-11-14T23:59:59.000Z

    The Geo-Heat Center (GHC) staff provided responses to 1442 technical support requests during the contract period (April 1, 2006 to September 30, 2007), which were six quarters under this contract. Our website, consisting of 1900 files, also contributes to our technical assistance activity. Downloaded files were 1,889,323 (3,448 per day) from our website, the total number of users was 1,365,258 (2,491 per day), and the total number of hits were 6,008,500 (10,064 per day). The GHC staff attended 60 workshops, short course and professional meeting and made 29 technical presentations. The staff also prepared and mailed out 2,000 copies of each of five issues of the GHC Quaterly Bulletin which contained 26 articles. We also mailed out approximately 5,000 papers and publications to interested individuals and organizations.

  2. SECTION 2 Table of Contents 2 Province Management Plan and Inventory....................................................2

    E-Print Network [OSTI]

    2-1 SECTION 2 ­ Table of Contents 2 Province Management Plan and Inventory 2.4 Inventory of Existing Programs in the Intermountain Province................................. 48....................................................................... 80 #12;2-2 2 Province Management Plan and Inventory The Technical Guide for Subbasin Planners states

  3. Tree-section harvesting of northern hardwood thinnings. Forest Service research paper

    SciTech Connect (OSTI)

    Mattson, J.A.

    1993-01-01T23:59:59.000Z

    The report describes the results of a field trial of tree-section harvesting, a shortwood version of whole-tree harvesting, in a northern hardwood thinning. This technique is technically feasible and especially useful where the appearance of the residual stand is a primary concern.

  4. Nutrient Management TrainingNutrient Management Training for Technical Service Providersfor Technical Service Providers

    E-Print Network [OSTI]

    Nutrient ManagementNutrient Management ­­ Record KeepingRecord Keeping ­­ Feed ManagementFeed ManagementNutrient Management TrainingNutrient Management Training for Technical Service Providersfor Management Planning Technical Guidance.Management Planning Technical Guidance. Manure and Wastewater Handling

  5. Standard technical specifications: Combustion engineering plants. Volume 1, Revision 1: Specifications

    SciTech Connect (OSTI)

    NONE

    1995-04-01T23:59:59.000Z

    This report documents the results of the combined effort of the NRC and the industry to produce improved Standard Technical Specifications (STS), Revision 1 for Combustion Engineering Plants. The changes reflected in Revision 1 resulted from the experience gained from license amendment applications to convert to these improved STS or to adopt partial improvements to existing technical specifications. This NUREG is the result of extensive public technical meetings and discussions between the Nuclear Regulatory Commission (NRC) staff and various nuclear power plant licensees, Nuclear Steam Supply System (NSSS) Owners Groups, NSSS vendors, and the Nuclear Energy Institute (NEI). The improved STS were developed based on the criteria in the Final Commission Policy Statement on Technical Specifications Improvements for Nuclear Power Reactors, dated July 22, 1993. The improved STS will be used as the basis for individual nuclear power plant licensees to develop improved plant-specific technical specifications. This report contains three volumes. Volume 1 contains the Specifications for all chapters and sections of the improved STS. Volume 2 contains the Bases for Chapters 2.0 and 3.0, and Sections 3.1--3.3 of the improved STS. Volume 3 contains the Bases for Sections 3.4--3.9 of the improved STS.

  6. Final Technical Report

    SciTech Connect (OSTI)

    Michael Laub

    2008-12-29T23:59:59.000Z

    Our team of investigators from MIT (Michael Laub) and Stanford (Harley McAdams and Lucy Shapiro) conducted a multi-faceted, systematic experimental analysis of the 106 Caulobacter two-component signal transduction system proteins (62 histidine kinases and 44 response regulators) to understand how they coordinate cell cycle progression, metabolism, and response to environmental changes. These two-component signaling proteins were characterized at the genetic, biochemical, and genomic levels. The results generated by our laboratories have provided numerous insights into how Caulobacter cells sense and respond to a myriad of signals. As nearly all bacteria use two-component signaling for cell regulation, the results from this project help to deepen our general understanding of bacterial signal transduction. The tools and approaches developed can be applied to other bacteria. In particular, work from the Laub laboratory now enables the systematic, rational rewiring of two-component signaling proteins, a major advance that stands to impact synthetic biology and the development of biosensors and other designer molecular circuits. Results are summarized from our work. Each section lists publications and publicly-available resources which result from the work described.

  7. Note and Record A note on polyvinyl chloride (PVC) pipe traps for

    E-Print Network [OSTI]

    Pretoria, University of

    Note and Record A note on polyvinyl chloride (PVC) pipe traps for sampling vegetation of traditional traps, and many are furtive (Myers et al., 2007; Pittman et al., 2008). PVC pipe traps, which and Hyperolius (see Channing, 2001; du Preez & Carruthers, 2009), may be attracted to artificial refugia of PVC

  8. GENOMIC RESOURCES NOTE Genomic Resources Notes accepted 1 February 201331 March

    E-Print Network [OSTI]

    Rieseberg, Loren

    GENOMIC RESOURCES NOTE Genomic Resources Notes accepted 1 February 2013­31 March 2013 GENOMIC RESOURCES DEVELOPMENT CONSORTIUM,1 MATTHEW G. KING,2 SE´ BASTIEN RENAUT,3 LOREN H. RIESEBERG2,4 and HEATHER C. ROWE3 1 Molecular Ecology Resources Editorial Office, 6270 University Blvd, Vancouver, BC V6T 1Z4

  9. 2004 Notes2Providers.doc -1-Notes to Retail Providers

    E-Print Network [OSTI]

    with the meter data reported to the system operator (Retail providers that purchase electricity from a power pool2004 Notes2Providers.doc -1- Notes to Retail Providers February 2005 Power Source Disclosure than the California Mix, (Net System Power)i . As a retail provider you are probably aware that all

  10. Scientific note A scientific note on the partial nucleotide sequence of a US strain

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Scientific note A scientific note on the partial nucleotide sequence of a US strain of Kashmir bee bee virus / nucleotide sequence / RT-PCR Kashmir bee virus (KBV) was first isolated from a diseased sequence of the amplified product. The BLASTN search of the Nucleotide Sequence Database at the National

  11. FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

    SciTech Connect (OSTI)

    KRIPPS, L.J.

    2005-03-03T23:59:59.000Z

    This document describes the qualitative evaluation of frequency and consequences for DST and SST representative flammable gas accidents and associated hazardous conditions without controls. The evaluation indicated that safety-significant structures, systems and components (SSCs) and/or technical safety requirements (TSRs) were required to prevent or mitigate flammable gas accidents. Discussion on the resulting control decisions is included. This technical basis document was developed to support WP-13033, Tank Farms Documented Safety Analysis (DSA), and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence.

  12. Section 3.3 Equivalence Relations1 Section 3.3 Equivalence RelationSection 3.3 Equivalence RelationSection 3.3 Equivalence RelationSection 3.3 Equivalence Relationssss

    E-Print Network [OSTI]

    Farlow, Jerry

    Section 3.3 Equivalence Relations1 Section 3.3 Equivalence RelationSection 3.3 Equivalence RelationSection 3.3 Equivalence RelationSection 3.3 Equivalence Relationssss Purpose of SectionPurpose of SectionPurpose of SectionPurpose of Section To introduce the concept of an equivalence relationequivalence

  13. Eva Kisdi, University of Helsinki, Finland. F1000 Ecology 17 Jul 2012 | New Finding, Technical Advance

    E-Print Network [OSTI]

    Hermisson, Joachim

    , Technical Advance 1. A simple fitness proxy for structured populations with continuous traits, with case of feedstocks for cellulosic biofuels Heather Youngs, Chris Somerville Plant-soil interactions in a changing and Sharing Relevant Sections Export More Options Search... Evaluated Articles Advanced Search Evaluated

  14. Technical Publications | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy Solar Decathlon | Department ofHeating1TechnicalTechnical

  15. US DRIVE Materials Technical Team Roadmap | Department of Energy

    Energy Savers [EERE]

    Materials Technical Team Roadmap US DRIVE Materials Technical Team Roadmap The Materials Technical Team (MTT) focuses primarily on reducing the mass of structural systems such as...

  16. FreedomCAR and Fuel Partnership 2008 Highlights of Technical...

    Energy Savers [EERE]

    8 Highlights of Technical Accomplishments FreedomCAR and Fuel Partnership 2008 Highlights of Technical Accomplishments Report containing brief summaries of key technical...

  17. FreedomCAR and Fuel Partnership 2007 Highlights of Technical...

    Energy Savers [EERE]

    7 Highlights of Technical Accomplishments FreedomCAR and Fuel Partnership 2007 Highlights of Technical Accomplishments Report containing brief summaries of key technical...

  18. FreedomCAR and Fuel Partnership 2009 Highlights of Technical...

    Energy Savers [EERE]

    9 Highlights of Technical Accomplishments FreedomCAR and Fuel Partnership 2009 Highlights of Technical Accomplishments This report summarizes key technical accomplishments achieved...

  19. FreedomCAR and Fuel Partnership 2010 Highlights of Technical...

    Energy Savers [EERE]

    10 Highlights of Technical Accomplishments FreedomCAR and Fuel Partnership 2010 Highlights of Technical Accomplishments This report summarizes key technical accomplishments...

  20. FreedomCAR and Fuel Partnership 2006 Highlights of Technical...

    Energy Savers [EERE]

    6 Highlights of Technical Accomplishments FreedomCAR and Fuel Partnership 2006 Highlights of Technical Accomplishments Report containing brief summaries of key technical...

  1. FreedomCAR and Fuel Partnership 2005 Highlights of Technical...

    Energy Savers [EERE]

    5 Highlights of Technical Accomplishments FreedomCAR and Fuel Partnership 2005 Highlights of Technical Accomplishments Report containing brief summaries of key technical...

  2. Table I: Technical Targets for Catalyst Coated Membranes (CCMs...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    I: Technical Targets for Catalyst Coated Membranes (CCMs): Automotive Table I: Technical Targets for Catalyst Coated Membranes (CCMs): Automotive Technical targets for fuel cell...

  3. Xyce parallel electronic simulator release notes.

    SciTech Connect (OSTI)

    Keiter, Eric Richard; Hoekstra, Robert John; Mei, Ting; Russo, Thomas V.; Schiek, Richard Louis; Thornquist, Heidi K.; Rankin, Eric Lamont; Coffey, Todd Stirling; Pawlowski, Roger Patrick; Santarelli, Keith R.

    2010-05-01T23:59:59.000Z

    The Xyce Parallel Electronic Simulator has been written to support, in a rigorous manner, the simulation needs of the Sandia National Laboratories electrical designers. Specific requirements include, among others, the ability to solve extremely large circuit problems by supporting large-scale parallel computing platforms, improved numerical performance and object-oriented code design and implementation. The Xyce release notes describe: Hardware and software requirements New features and enhancements Any defects fixed since the last release Current known defects and defect workarounds For up-to-date information not available at the time these notes were produced, please visit the Xyce web page at http://www.cs.sandia.gov/xyce.

  4. Computer Science Department Technical Report

    E-Print Network [OSTI]

    Shahriar, Selim

    questions on querying and attack-resilience of CDDHT are also discussed. #12;Keywords: security, distributed intrusion detection systems, distributed hash table #12;1 Cyber Disease Monitoring with Distributed HashComputer Science Department Technical Report NWU-CS-04-40 July 12, 2004 Cyber Disease Monitoring

  5. DOE FINAL TECHNICAL REPORT RP

    SciTech Connect (OSTI)

    RUSS PETERMAN

    2012-01-01T23:59:59.000Z

    The City of Georgetown Utility Systems (GUS) patnered with the private sector, the American Public Power Association (APPA) and Southwestern University to design, construct, test and monitor a solar co-generation system directly connected to the GUS electric distribution system. This report consists of the Primary Technical Report and 3 attachments.

  6. Modularized training for technical editors

    SciTech Connect (OSTI)

    Murphy, P.W.

    1988-09-08T23:59:59.000Z

    This paper outlines the editorial services provided at the Lawrence Livermore National Laboratory (LLNL), sketches a syllabus of basic training for technical editors, describes the approach being used to develop this cost-effective individualized instruction for editors (experienced or not) new to work at LLNL, and enumerates the advantages of this approach. 8 refs.

  7. Defense Technical Information Center thesaurus

    SciTech Connect (OSTI)

    Dickert, J.H. [ed.] [comp.

    1996-10-01T23:59:59.000Z

    This DTIC Thesaurus provides a basic multidisciplinary subject term vocabulary used by DTIC to index and retrieve scientific and technical information from its various data bases and to aid DTIC`s users in their information storage and retrieval operations. It includes an alphabetical posting term display, a hierarchy display, and a Keywork Out of Context (KWOC) display.

  8. Facility worker technical basis document

    SciTech Connect (OSTI)

    EVANS, C.B.

    2003-03-21T23:59:59.000Z

    This report documents the technical basis for facility worker safety to support the Tank Farms Documented Safety Analysis and described the criteria and methodology for allocating controls to hazardous conditions with significant facility worker consequences and presents the results of the allocation.

  9. Mechanical Engineering Department technical review

    SciTech Connect (OSTI)

    Carr, R.B.; Abrahamson, L.; Denney, R.M.; Dubois, B.E (eds.) [eds.

    1982-01-01T23:59:59.000Z

    Technical achievements and publication abstracts related to research in the following Divisions of Lawrence Livermore Laboratory are reported in this biannual review: Nuclear Fuel Engineering; Nuclear Explosives Engineering; Weapons Engineering; Energy Systems Engineering; Engineering Sciences; Magnetic Fusion Engineering; and Material Fabrication. (LCL)

  10. Deleware Water Resources Center Annual Technical Report

    E-Print Network [OSTI]

    of best management practices (BMPs) by private businesses, and improved storm water management & wetlandsDeleware Water Resources Center Annual Technical Report FY 2002 Introduction Delaware Water Resources Center Annual Technical Report Introduction and Program Management/Administration Description FY

  11. Biodiesel ASTM Update and Future Technical Needs

    Broader source: Energy.gov (indexed) [DOE]

    ASTM Update and Future Technical Needs Steve Howell Technical Director National Biodiesel Board ASTM Current Status ASTM D6751 is the approved standard for B100 for blending up to...

  12. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-00-1795-S 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  13. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-05/0-4485-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  14. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-00/0-1843-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  15. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-03/4083-2 2. Government Accession No. 3. This document is available to the public through the National Technical Information Service, Springfield

  16. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Zornberg, Jorge G.

    Technical Report Documentation Page 1. Report No. FHWA/TX-12/5-4829-01-3 2. Government Accession No No restrictions. This document is available to the public through the National Technical Information Service

  17. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-0-1814-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  18. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Zornberg, Jorge G.

    Technical Report Documentation Page 1. Report No. FHWA/TX-10/0-5812-1 2. Government Accession No. 3. This document is available to the public through the National Technical Information Service, Springfield

  19. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-03-1838-8 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  20. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-00/1754-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  1. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-05/9-580/589-2 2. Government Accession No. Distribution Statement No restrictions. This document is available to the public through the National Technical

  2. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-04/1778-4 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  3. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-04/0-1734-S 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  4. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-11/0-6348-1 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  5. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-00/1785-2 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  6. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-03/4386-1 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  7. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-06/0-4085-5 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  8. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-06/0-1401-2 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  9. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-10/0-5974-1 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  10. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-04/0-1471-4 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  11. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-0-1748-2 2. Government Accession No. 3. This document is available to the public through the National Technical Information Service, Springfield

  12. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-04/0-4808-1 2. Government Accession No. 3. This document is available to the public through the National Technical Information Service, Springfield

  13. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-04/5-3933-01-P1-4 2. Government Accession No restrictions. This document is available to the public through the National Technical Information Service

  14. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-06/0-4437-1 2. Government Accession No. 3. This document is available to the public through the National Technical Information Service, Springfield

  15. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-06/5-4975-01-1 2. Government Accession No. This document is available to the public through the National Technical Information Service, Springfield

  16. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-06/0-4185-4 2. Government Accession No. 3. This document is available to the public through the National Technical Information Service, Springfield

  17. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-06/0-4958-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  18. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-11/0-6095-2 2. Government Accession No. 3 Statement No restrictions. This document is available to the public through the National Technical

  19. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-07/0-1700-7 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  20. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-07/0-5410-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service