Sample records for technical exchange denver

  1. Building America Summer 2012 Technical Update Meeting Report: Denver, Colorado - July 24 - 26, 2012

    SciTech Connect (OSTI)

    Not Available

    2012-10-01T23:59:59.000Z

    This report summarizes key findings and outcomes from the U.S. Department of Energy's Building America Summer Technical Update Meeting, held on July 24-26, 2012, in Denver, Colorado.

  2. 2011 Residential Energy Efficiency Technical Update Meeting Summary Report: Denver, Colorado - August 9-11, 2011

    SciTech Connect (OSTI)

    Not Available

    2011-11-01T23:59:59.000Z

    This report provides an overview of the U.S. Department of Energy Building America program's Summer 2011 Residential Energy Efficiency Technical Update Meeting. This meeting was held on August 9-11, 2011, in Denver, Colorado, and brought together more than 290 professionals representing organizations with a vested interest in energy efficiency improvements in residential buildings.

  3. December 11-12, 2014 - Technical Exchange Meeting - Las Vegas...

    Office of Environmental Management (EM)

    Agency (EPA), U.S. Nuclear Regulatory Commission (NRC), Washington State Department of Ecology, and Commonwealth of Kentucky, conducted the Annual Technical Exchange for the...

  4. Technical Information Exchange on Pyrolysis Oil: Potential for...

    Office of Environmental Management (EM)

    Renewab;e Heating Oil Substation Fuel in New England Technical Information Exchange on Pyrolysis Oil: Potential for a Renewab;e Heating Oil Substation Fuel in New England This...

  5. 2011 PERFORMANCE ASSESSMENT COMMUNITY OF PRACTICE TECHNICAL EXCHANGE - SUMMARY

    SciTech Connect (OSTI)

    Seitz, R.

    2011-12-30T23:59:59.000Z

    The Performance Assessment Community of Practice (PA CoP) was developed in 2008 to improve consistency and quality in the preparation of performance assessments (PAs) and risk assessments across the Department of Energy (DOE) Complex. The term, PA, is used to represent all of these modeling applications in this report. The PA CoP goals are to foster the exchange of information among PA practitioners and to share lessons learned from PAs conducted for DOE, commercial disposal facilities, and international entities. Technical exchanges and workshops are a cornerstone of PA CoP activities. Previous technical exchanges have addressed Engineered Barriers (2009 - http://www.cresp.org/education/workshops/pacop/), the Advanced Simulation Capability for Environmental Management and the Cementitious Barriers Partnership (2010 - http://srnl.doe.gov/copexchange/links.htm). Each technical exchange also includes summary presentations regarding activities at DOE, the Nuclear Regulatory Commission (NRC) and other organizations (e.g., International Atomic Energy Agency (IAEA)) as well as a number of presentations from selected sites to provide insight and perspective from on-going modeling activities. Through the deployment of PA Assistance Teams, the PA CoP has also been engaged in the development of new PAs across the DOE Complex. As a way of improving consistency in the preparation of new PAs, the teams provide technical advice and share experiences, noteworthy practices, and lessons learned from previous Low-Level Waste Disposal Facility Federal Review Group (LFRG) reviews. Teams have provided support for PAs at Hanford, Idaho, Paducah and Portsmouth. The third annual PA CoP Technical Exchange was held on May 25-26, 2011 in Atlanta, GA. The PA CoP Steering Committee Meeting held its first meeting on May 24 prior to the Technical Exchange. Decision making using models and software quality assurance were the topical emphasis for the exchange. A new feature at the 2011 technical exchange was the use of panel discussions to solicit feedback from regulators and practitioners. This report summarizes discussions and recommendations from the steering committee meeting and presentations and feedback obtained at the technical exchange. Appendix I includes the steering committee meeting agenda and Appendix II includes the agenda for the technical exchange and a screenshot of the presentations and video files that are available online.

  6. TECHNICAL COMPARISON OF CANDIDATE ION EXCHANGE MEDIA FOR SMALL COLUMN ION EXCHANGE (SCIX) APPLICATIONS IN SUPPORT OF SUPPLEMENTAL LAW PRETREATMENT

    SciTech Connect (OSTI)

    RAMSEY AA; THORSON MR

    2010-12-28T23:59:59.000Z

    At-tank supplemental pretreatment including both filtration and small column ion exchange is currently under evaluation to facilitate salt waste retrieval and processing in the Hanford tank farms. Spherical resorcinol formaldehyde (sRF) resin is the baseline ion exchange resin for use in the Waste Treatment and Immobilization Plant (WTP). This document provides background and technical rationale to assist in determining whether spherical resorcinol formaldehyde (sRF) is also the appropriate ion exchange resin for supplemental LAW pretreatment processes and compares sRF with crystalline silicotitanate (CST) as potential supplemental pretreatment ion exchange media.

  7. NNSA hosts Illinois emergency responders during technical exchange...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Press Releases Video Gallery Photo Gallery Jobs Apply for Our Jobs Our Jobs Working at NNSA Blog Home NNSA Blog NNSA hosts Illinois emergency responders during technical ......

  8. Technical Information Exchange on Pyrolysis Oil: Potential for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exchange on Pyrolysis Oil: Potential for a Renewab;e Heating Oil Substation Fuel in New England April 2012 Biomass Program News Blast June 2012 News Blast: Algae on the Mind...

  9. Proceedings of the Efficient Separations and Processing Cross-Cutting Program Annual Technical Exchange Meeting

    SciTech Connect (OSTI)

    NONE

    1995-02-01T23:59:59.000Z

    This document contains summaries of technology development presented at the 1995 Efficient Separations and Processing Cross-Cutting Program (ESP) Annual Technical Exchange Meeting. The ESP is sponsored by the US Department of Energy`s Office of Environmental Management (EM), Office of Technology Development. The meeting is held annually to promote a free exchange of ideas among technology developers, potential users (for example, EM focus areas), and other interested parties within EM. During this meeting, developers of ESP-funded technologies describe the problems and needs addressed by their technologies; the technical approach, accomplishments, and resolution of issues; the strategy and schedule for commercialization; and evolving potential applications. Presenters are asked to address the following areas: Target waste management problem, waste stream, or data need; scientific background and technical approach; technical accomplishments and resolution of technical issues; schedule and strategy for commercializing and implementing the technology or acquiring needed data; potential alternate applications of the technology or data, including outside of DOE/EM. The meeting is not a program review of the individual tasks or subtasks; but instead focuses on the technical aspects and implementation of ESP-sponsored technology or data. The meeting is also attended by members of the ESP Technical Review Team, who have the opportunity at that time to review the ESP as a whole.

  10. 2011 Residential Energy Efficiency Technical Update Meeting Summary...

    Energy Savers [EERE]

    2011 Residential Energy Efficiency Technical Update Meeting Summary Report: Denver, Colorado - August 9-11, 2011 2011 Residential Energy Efficiency Technical Update Meeting Summary...

  11. Reducing nuclear danger through intergovernmental technical exchanges on nuclear materials safety management

    SciTech Connect (OSTI)

    Jardine, L.J. [Lawrence Livermore National Lab., CA (United States); Peddicord, K.L. [Texas A and M Univ., College Station, TX (United States); Witmer, F.E.; Krumpe, P.F. [USDOE, Washington, DC (United States); Lazarev, L.; Moshkov, M. [Radievyj Inst., Leningrad (Russian Federation)

    1997-04-09T23:59:59.000Z

    The United States and Russia are dismantling nuclear weapons and generating hundreds of tons of excess plutonium and high enriched uranium fissile nuclear materials that require disposition. The U.S. Department of Energy and Russian Minatom organizations.are planning and implementing safe, secure storage and disposition operations for these materials in numerous facilities. This provides a new opportunity for technical exchanges between Russian and Western scientists that can establish an improved and sustained common safety culture for handling these materials. An initiative that develops and uses personal relationships and joint projects among Russian and Western participants involved in fissile nuclear materials safety management contributes to improving nuclear materials nonproliferation and to making a safer world. Technical exchanges and workshops are being used to systematically identify opportunities in the nuclear fissile materials facilities to improve and ensure the safety of workers, the public, and the environment.

  12. City and County of Denver- Solar Panel Permitting (Colorado)

    Broader source: Energy.gov [DOE]

    Construction, Electrical, Plumbing and Zoning Permits* are required for Photovoltaic (PV) systems installed in the city of Denver. Denver provides same day permit review for most solar panel...

  13. TRADE (Training Resources and Data Exchange) technical training programs inventory: Volume IV, Craft programs, miscellaneous programs

    SciTech Connect (OSTI)

    Not Available

    1987-10-01T23:59:59.000Z

    In a continuing effort to facilitate communications and resource exchange among the DOE contractors, the TRADE (Training Resources and Data Exchange) Committee composed of representatives from 10 DOE contractors, has compiled the Training Programs Inventories. Taken together there are over 2700 courses that reflect the range and focus of in-house training programs being offered throughour the DOE GOCO system by approximately 49 contractors. The Technical Training Programs Inventories include those programs or courses designed specifically for in-house employees and which provide development and practical information about job-related subjects not included in the nontechnical training area. The focus of the Inventories has been on targeted audiences, resources, and course design. The contact person has been listed with each course to encourage the use of the inventories and facilitate the excchange of information between GOCOs through a peer-to-peer exchange between training personnel of various contractors. This publication contains 140 courses focusing on crafts programs and miscellanous programs at all levels. Information of the inventories is available on the DOE Integrated Technical Information System (ITIS) as the TRD file.

  14. Advanced Small Modular Reactor (SMR) Probabilistic Risk Assessment (PRA) Technical Exchange Meeting

    SciTech Connect (OSTI)

    Curtis Smith

    2013-09-01T23:59:59.000Z

    During FY13, the INL developed an advanced SMR PRA framework which has been described in the report Small Modular Reactor (SMR) Probabilistic Risk Assessment (PRA) Detailed Technical Framework Specification, INL/EXT-13-28974 (April 2013). In this framework, the various areas are considered: Probabilistic models to provide information specific to advanced SMRs Representation of specific SMR design issues such as having co-located modules and passive safety features Use of modern open-source and readily available analysis methods Internal and external events resulting in impacts to safety All-hazards considerations Methods to support the identification of design vulnerabilities Mechanistic and probabilistic data needs to support modeling and tools In order to describe this framework more fully and obtain feedback on the proposed approaches, the INL hosted a technical exchange meeting during August 2013. This report describes the outcomes of that meeting.

  15. Cleaning up the Streets of Denver

    SciTech Connect (OSTI)

    Stegen, R.L.; Wood, T.R.; Hackett, J.R. [Parsons, 1700 Broadway, Suite 900, Denver, Colorado 80290 (United States); Sogue, A. [City and County of Denver, 201 West Colfax, Denver, Colorado 80202 (United States)

    2006-07-01T23:59:59.000Z

    Between 1913 and 1924, several Denver area facilities extracted radium from carnotite ore mined from the Paradox basin region of Colorado. Tailings or abandoned ores from these facilities were apparently incorporated into asphalt used to pave approximately 7.2 kilometers (4.5 miles) of streets in Denver. A majority of the streets are located in residential areas. The radionuclides are bound within the asphalt matrix and pose minimal risk unless they are disturbed. The City and County of Denver (CCoD) is responsible for controlling repairs and maintenance on these impacted streets. Since 2002, the CCoD has embarked on a significant capital improvement project to remove the impacted asphalt for secure disposal followed by street reconstruction. To date, Parsons has removed approximately 55 percent of the impacted asphalt. This paper discusses the history of the Denver Radium Streets and summarizes on-going project efforts. (authors)

  16. City and County of Denver- Solar Panel Permitting

    Broader source: Energy.gov [DOE]

    Denver provides same-day permit review for most solar panel projects. Electrical, Plumbing, and Zoning Permits* are required for photovoltaic (PV) systems installed in the city of Denver, althoug...

  17. THE Denver Newspaper Agency PUBLISHER'S AFFIDAVIT

    E-Print Network [OSTI]

    In whole or hI pert In Denver, In the County of Denver end St.te of Color.do, end thet .eld new.p.per w~/~~s.:'~I;{;"bel~'6f~te~~~ ffieC:olorado School of Mines Environmental Health and Safety Department Havelick, Director, Environmental Health and Safety, Col- g'd'gd'4~f7;'h~~~I~i£~(~~~Oel~I~1°~tf6~~~~~s

  18. Denver, Colorado: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOE Facility DatabaseMichigan: Energy ResourcesDenair,DennisDenver Basin|Denver,

  19. Denver, Colorado: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Denver, Colorado, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  20. Surrounding Denver Metro Smart Sign Study

    E-Print Network [OSTI]

    Denver, University of

    and the City of Boulder Over the course of the 2000 summer, the smart sign measured over 200,000 vehiclesSurrounding Denver Metro Smart Sign Study Summer 2000 Sponsored by the Regional Air Quality Council emissions (see figure below). The SMART SIGN uses an RSD 3000 detection system so all HC data in this report

  1. Radiation Research Society 2005 Annual Meeting, Denver, Colorado

    SciTech Connect (OSTI)

    Robert Ullrich, PhD

    2005-10-04T23:59:59.000Z

    Abstracts and proceedings of the 2005 Annual Meeting of the Radiation Research Society held in Denver, Colorado on October 16-19, 2005.

  2. Clean Cities: Denver Metro Clean Cities coalition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced. C o w l i t z CPlasma0 12Denver Metro Clean Cities Coalition The

  3. Denver Basin Map | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOE Facility DatabaseMichigan: Energy ResourcesDenair,DennisDenver Basin Map

  4. Denver, Colorado: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOE Facility DatabaseMichigan: Energy ResourcesDenair,DennisDenver Basin|

  5. Denver, Colorado: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualPropertyd8c-a9ae-f8521cbb8489 No revision hasda62829c05bGabbs Valley Area (DOECounty,Denver,

  6. SME Annual Meeting Feb. 26-28, Denver, Colorado

    E-Print Network [OSTI]

    Saylor, John R.

    SME Annual Meeting Feb. 26-28, Denver, Colorado 1 Copyright © 2001 by SME Preprint 01-114 EFFECTS of operating conditions that included multiple drum heights and the use of side and underboom sprays. #12;SME Annual Meeting Feb. 26-28, Denver, Colorado 2 Copyright © 2001 by SME TEST FACILITY Gallery Testing

  7. Local Energy Plans in Practice: Case Studies of Austin and Denver

    SciTech Connect (OSTI)

    Petersen, D.; Matthews, E.; Weingarden, M.

    2011-03-01T23:59:59.000Z

    Examines the successes and difficulties that Denver, CO, and Austin, TX , experienced implementing citywide energy plans.

  8. Alfred A. Arraj U.S. Courthouse; Denver, Colorado: A Model of Sustainability

    SciTech Connect (OSTI)

    Not Available

    2005-09-01T23:59:59.000Z

    This brochure describes the sustainability of the Alfred A. Arraj United States Courthouse in Denver, Colorado.

  9. Building America Summer 2012 Technical Update Meeting Report: Denver,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof Energy Future ofHydronic Heating inOctober 2011 |DepartmentColorado -

  10. City extensions : the revitalization of Denver Colorado's Platte River Valley

    E-Print Network [OSTI]

    Sobey, James A

    1982-01-01T23:59:59.000Z

    This thesis examines a process for future city growth in Denver, Colorado. Its objective is to develop a model by which future expansion of the city might build qualities of continuity and identity between adjacent sections ...

  11. 2005 ASME Pressure Vessels and Piping Conference Denver, Colorado, USA

    E-Print Network [OSTI]

    Özer, Mutlu

    1 DRAFT 2005 ASME Pressure Vessels and Piping Conference Denver, Colorado, USA July 17-21, 2005 subjected to lateral earthquake loads. The results are verified with different codes (e.g. Eurocode8, API

  12. Habitat for Humanity of Metro Denver Zero Energy Demonstration Home

    SciTech Connect (OSTI)

    Not Available

    2008-04-01T23:59:59.000Z

    This brochure describes the 2005 demonstration home designed by NREL and the Habitat for Humanity of Metro Denver. The completed home produced 24% more energy than it consumed over 12 months.

  13. High-Penetration Photovoltaics Standards and Codes Workshop, Denver, Colorado, May 20, 2010: Workshop Proceedings

    SciTech Connect (OSTI)

    Coddington, M.; Kroposki, B.; Basso, T.; Lynn, K.; Herig, C.; Bower, W.

    2010-09-01T23:59:59.000Z

    Effectively interconnecting high-level penetration of photovoltaic (PV) systems requires careful technical attention to ensuring compatibility with electric power systems. Standards, codes, and implementation have been cited as major impediments to widespread use of PV within electric power systems. On May 20, 2010, in Denver, Colorado, the National Renewable Energy Laboratory, in conjunction with the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE), held a workshop to examine the key technical issues and barriers associated with high PV penetration levels with an emphasis on codes and standards. This workshop included building upon results of the High Penetration of Photovoltaic (PV) Systems into the Distribution Grid workshop held in Ontario California on February 24-25, 2009, and upon the stimulating presentations of the diverse stakeholder presentations.

  14. Vitrification of ion-exchange (IEX) resins: Advantages and technical challenges

    SciTech Connect (OSTI)

    Jantzen, C.M.; Peeler, D.K.; Cicero, C.A.

    1995-12-31T23:59:59.000Z

    Technologies are being developed by the US Department of Energy`s (DOE) Savannah River Site (SRS) in conjunction with the Electric Power Research Institute (EPRI) and the commercial sector to convert low-level radioactive ion exchange (IEX) resin wastes from the nuclear utilities to solid stabilized waste forms for permanent disposal. One of the alternative waste stabilization technologies is vitrification of the resin into glass. Wastes can be vitrified at elevated temperatures by thermal treatment. One alternative thermal treatment is conventional Joule heated melting. Vitrification of wastes into glass is an attractive option because it atomistically bonds both hazardous and radioactive species in the glass structure, and volume reduces the wastes by 70-80%. The large volume reductions allow for large associated savings in disposal and/or long term storage costs.

  15. DOE Zero Energy Ready Home Case Study: New Town Builders, Denver...

    Energy Savers [EERE]

    New Town Builders, Denver, CO, Production Home DOE Zero Energy Ready Home Case Study: New Town Builders, Denver, CO, Production Home Case study of a DOE Zero Energy Ready Home in...

  16. E-Print Network 3.0 - accounting service denver Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in Denver in the winter may account for some of the increased NO. We also suspect a cooling... On-Road Remote Sensing of Automobile Emissions in the Denver Area: Year 1 Peter...

  17. Remote sensing at the Speer off ramp, Denver, CO

    SciTech Connect (OSTI)

    Slott, R. [Shell Oil Co., Houston, TX (United States)

    1996-10-01T23:59:59.000Z

    Remote sensing under controlled driving conditions predicts failed FTP CO and HC emissions similarly to the IM240 test. Careful selection of on-road, remote sensing measurement sites can constrain driving modes. At one such site, the Speer Boulevard I-25 off ramp in Denver, Don Stedman and his co-workers made remote sensing measurements from 1989 to 1995. Studies were performed during five of these seven years. This talk will discuss the results of these studies including (1) the relative importance of new vehicle technology and vehicle deterioration for on-road Co emissions, and (2) an early estimate of additional on-road HC and CO emission reductions from Denver`s Enhanced I/M program.

  18. A brownfield to greenfield success story: Denver Radium Superfund Site

    SciTech Connect (OSTI)

    Baracani, E. [Sverdrup Environmental, Inc., Golden, CO (United States); Bruskin, L.J. [Colorado Dept. of Public Health and the Environment, Denver, CO (United States)

    1996-12-31T23:59:59.000Z

    The Denver Radium Site consists of forty-nine separate sites divided into 11 operable units throughout the city of Denver, Colorado. The sites contained radioactive soils and residues (310,000 tons) from processing of radium in the early 1900s. The majority of the radioactive material was removed, transported by rail, and disposed offsite in Utah. During radiologic cleanup at the former Robinson Brick Company Site (ROBCO), (OU No. 4/5), metal contaminated soils from previous smelting operations were encountered. The Denver Radium Site was placed on the National Priorities List (NPL), and through cooperation of private parties, the state and federal governments, the land was cleaned up and restored to productive use.

  19. Superfund Record of Decision (EPA Region 8): Denver Radium, Operable Unit 9, Denver, CO. (Eighth remedial action), December 1991

    SciTech Connect (OSTI)

    Not Available

    1991-12-23T23:59:59.000Z

    The Denver Radium site is a former radioactive mining site located in Denver, Denver County, Colorado. Industrial activities commenced at the site in 1886 with the construction of the Bailey Smelter. By 1903, the Colorado Zinc Company had constructed a mill on the site of the Bailey Smelter, and zinc milling operations continued until 1910. From 1914 to 1917, the U.S. Bureau of Mines operated a radium processing facility onsite, known as the National Radium Institute (NRI). Other onsite industrial activities included minerals recovery, manufacturing and servicing of storage batteries, treating and sacking of metallic ore insulation, oil reclamation, and landfilling. The ROD addresses approximately 16,500 cubic yards of metal-contaminated soil as OU9, the 9th of 11 OUs planned for the site. The primary contaminants of concern affecting the soil are metals, including arsenic, lead, and zinc.

  20. On-Road Remote Sensing of Automobile Emissions in the Denver Area: Year 6,

    E-Print Network [OSTI]

    Denver, University of

    On-Road Remote Sensing of Automobile Emissions in the Denver Area: Year 6, January 2007 Gary A 80208 June 2007 #12;On-Road Remote Sensing of Automobile Emissions in the Denver Area: Year 6 1-Road Remote Sensing of Automobile Emissions in the Denver Area: Year 6 2 INTRODUCTION Many cities

  1. SUMMARY OF TERTIARY COAL RESOURCES OF THE DENVER BASIN, COLORADO

    E-Print Network [OSTI]

    Chapter SD SUMMARY OF TERTIARY COAL RESOURCES OF THE DENVER BASIN, COLORADO By D. J. Nichols in U.S. Geological Survey Professional Paper 1625-A 1999 Resource assessment of selected Tertiary coal beds and zones here or on this symbol in the toolbar to return. 1999 Resource assessment of selected Tertiary coal

  2. U.S.-MEXICO TECHNOLOGY TRANSFER; BILATERAL TECHNICAL EXCHANGES FOR SUSTAINABLE ECONOMIC GROWTH IN THE BORDER REGION

    SciTech Connect (OSTI)

    Jimenez, Richard, D., Dr.

    2007-10-01T23:59:59.000Z

    The U.S. Department of Energy (DOE) maintains a strong commitment to transfer the results of its science and technology programs to the private sector. The intent is to apply innovative and sometimes advanced technologies to address needs while simultaneously stimulating new commercial business opportunities. Such focused “technology transfer” was evident in the late 1990s as the results of DOE investments in environmental management technology development led to new tools for characterizing and remediating contaminated sites as well as handling and minimizing the generation of hazardous wastes. The Department’s Office of Environmental Management was attempting to reduce the cost, accelerate the schedule, and improve the efficacy of clean-up efforts in the nuclear weapons complex. It recognized that resulting technologies had broader world market applications and that their commercialization would further reduce costs and facilitate deployment of improved technology at DOE sites. DOE’s Albuquerque Operations Office (now part of the National Nuclear Security Administration) began in 1995 to build the foundation for a technology exchange program with Mexico. Initial sponsorship for this work was provided by the Department’s Office of Environmental Management. As part of this effort, Applied Sciences Laboratory, Inc. (ASL) was contracted by the DOE Albuquerque office to identify Mexico’s priority environmental management needs, identify and evaluate DOE-sponsored technologies as potential solutions for those needs, and coordinate these opportunities with decision makers from Mexico’s federal government. That work led to an improved understanding of many key environmental challenges that Mexico faces and the many opportunities to apply DOE’s technologies to help resolve them. The above results constituted, in large part, the foundation for an initial DOE-funded program to apply the Department’s technology base to help address some of Mexico’s challenging environmental issues. The results also brought focus to the potential contributions that DOE’s science and technology could make for solving the many difficult, multi-generational problems faced by hundreds of bi-national communities along the 2,000-mile shared border of the United States and Mexico. Efforts to address these U.S.-Mexico border issues were initially sponsored by the DOE’s Albuquerque and Carlsbad offices. In subsequent years, the U.S. Congress directed appropriations to DOE’s Carlsbad office to address public health, safety and security issues prevalent within U.S.-Mexico border communities. With ASL’s assistance, DOE’s Albuquerque office developed contacts and formed partnerships with interested U.S and Mexican government, academic, and commercial organizations. Border industries, industrial effluents, and public health conditions were evaluated and documented. Relevant technologies were then matched to environmental problem sets along the border. Several technologies that were identified and subsequently supported by this effort are now operational in a number of U.S.-Mexico border communities, several communities within Mexico’s interior states, and in other parts of Latin America. As a result, some serious public health threats within these communities caused by exposure to toxic airborne pollutants have been reduced. During this time, DOE’s Carlsbad office hosted a bilateral conference to establish a cross-border consensus on what should be done on the basis of these earlier investigative efforts. Participating border region stakeholders set an agenda for technical collaborations. This agenda was supported by several Members of Congress who provided appropriations and directed DOE’s Carlsbad office to initiate technology demonstration projects. During the following two years, more than 12 private-sector and DOE-sponsored technologies were demonstrated in partnership with numerous border community stakeholders. All technologies were well received and their effectiveness at addressing health, safety and security issues w

  3. City of Denver- Green Building Requirement for City-Owned Buildings

    Broader source: Energy.gov [DOE]

    Executive Order 123, signed in October 2007, established the Greenprint Denver Office and the Sustainability Policy for the city. The Sustainability Policy includes several goals and requirements...

  4. Anion-exchange resin-based desulfurization process. Quarterly technical progress report, Januray 1, 1992--March 31, 1992

    SciTech Connect (OSTI)

    Sheth, A.C.; Strevel, S.D.; Dharmapurikar, R.

    1992-07-01T23:59:59.000Z

    Under DOE Grant No. FG22-90PC90309, the University of Tennessee Space Institute (UTSI) is contracted to further develop its anion-exchange, resin-based desulfurization concept to desulfurize alkali metal sulfates. From environmental as well as economic viewpoints, it is necessary to remove soluble sulfates from the wastes created by flue gas desulfurization systems. In order to do this economically, a low-cost desulfurization process for spent sorbents is necessary. UTSI`s anion-exchange resin-based desulfurization concept is believed to satisfy these requirements.

  5. Technical Report: Impacts of Land Management and Climate on Agroecosystem Greenhouse Gas Exchange in the Upper Midwest United States

    SciTech Connect (OSTI)

    Timothy J. Griffis; John M. Baker

    2007-07-01T23:59:59.000Z

    Our research is designed to improve the scientific understanding of how carbon is cycled between the land and atmosphere within a heavily managed landscape that is characteristic of the Upper Midwest. The Objectives are: 1) Quantify the seasonal and interannual variation of net ecosystem CO2 exchange of agricultural ecosystems in the Upper Midwest grown under different management strategies; 2) Partition net ecosystem CO2 exchange into photosynthesis and ecosystem respiration by combining micrometeorological and stable isotope techniques; 3) Examine the seasonal variation in canopy-scale photosynthetic discrimination and the isotope ratios of ecosystem respiration and photosynthesis.

  6. Quadrennial Energy Review Stakeholder Meeting #7: Denver, CO

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn April 23, 2014, an OHASeptember 2010In addition to analysis3 News7: Denver, CO

  7. Denver Federal Center Solar Park | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOE Facility DatabaseMichigan: Energy ResourcesDenair,DennisDenver Basin

  8. Denver University - International Institute for Environment and Enterprise

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOE Facility DatabaseMichigan: Energy ResourcesDenair,DennisDenver Basin| Open

  9. On-Road Remote Sensing of Automobile Emissions in the Denver Area: Year 5,

    E-Print Network [OSTI]

    Denver, University of

    On-Road Remote Sensing of Automobile Emissions in the Denver Area: Year 5, January 2005 Gary A, Suite 140 Alpharetta, Georgia 30022 Contract No. E-23-9 #12;On-Road Remote Sensing of Automobile campaigns.13 #12;On-Road Remote Sensing of Automobile Emissions in the Denver Area: Year 5 2 INTRODUCTION

  10. Performance analysis of 11 Denver Metro passive homes

    SciTech Connect (OSTI)

    Claridge, D.E.; Simms, D.A.

    1981-07-01T23:59:59.000Z

    The Solar Energy Research Institute (SERI) sponsored the Denver Metro Solar Homebuilders Program in cooperation with the Department of Energy and Western SUN. The auxiliary heating requirements for 11 of the passive solar homes were calculated using SLR or SUNCAT-2.4 with a standard set of basic assumptions. The analysis shows that seven of the homes should use less than half as much heating fuel as typical houses recently built in the area; two should use about half; and two should use about two-thirds or more. Comparing these results with performance estimates provided by design consultants shows numerous large discrepancies. These differences can be attributed largely to specific differences in assumptions in every case but one.

  11. On-Road Remote Sensing of Automobile Emissions in the Denver Area: Year 1

    E-Print Network [OSTI]

    Denver, University of

    On-Road Remote Sensing of Automobile Emissions in the Denver Area: Year 1 Peter J. Popp, Sajal S to Heywood,2 carbon monoxide emissions from automobiles are at a maximum when the air/fuel ratio is rich

  12. Investigation of the unconfined flow system at the Rocky Mountain Arsenal, Denver, Colorado 

    E-Print Network [OSTI]

    Sturdivant, Peter Laurence

    1993-01-01T23:59:59.000Z

    of Problem Research Objectives DATABASE DEVELOPMENT 1 1 5 8 11 12 14 Hydrogeologic Data Water Table Maps . Determination of Unconfined vs Confined Conditions Groundwater Model Model Results Data Combination . Top of Denver Formation Surface.... White areas indicate zones of unsaturated alluvium where the water table exists in the Denver Formation. Referenced Section numbers are located in the center of each Section 60 Figure 28. DPA and HLA 4th quarter water table, with zones of unsaturated...

  13. Terry sandstone member of the Pierre Shale, Upper Cretaceous, Spindle field, Denver Basin, Colorado 

    E-Print Network [OSTI]

    Helsley, Robert James

    1985-01-01T23:59:59.000Z

    TERRY SANDSTONE MEMBER OF THE PIERRE SHALE, UPPER CRETACEOUS, SPINDLE FIELD, DENVER BASIN, COLORADO A Thesis by ROBERT JAMES HELSLEY Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement... for the degree of MASTER OF SCIENCE August 1985 Major Subject: Geology TERRY SANDSTONE MEMBER OF THE PIERRE SHALE, UPPER CRETACEOUS, SPINDLE FIELD, DENVER BASIN, COLORADO A Thesis by ROBERT JAMES HELSLEY Approved as to style and content by: R. R. Berg...

  14. Depositional environment and hydrodynamic flow in Lower Cretaceous J Sandstone, Lonetree field, Denver basin, Colorado

    E-Print Network [OSTI]

    Bicknell, James Scott

    1985-01-01T23:59:59.000Z

    DEPOSITIONAL ENVIRONMENT AND HYDRODYNAMIC FLOW IN LOWER CRETACEOUS J SANDSTONE, LONETREE FIELD, DENVER BASIN, COLORADO A Thesis by JAMES SCOTT BICKNELL Submitted to the Graduate College of Texas A&M University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE December 1985 Major Subject: Geology DEPOSITIONAL ENVIRONMENT AND HYDRODYNAMIC FLOW IN LOWER CRETACEOUS J SANDSTONE, LONETREE FIELD, DENVER BASIN, COLORADO A Thesis by JAMES SCOTT BICKNELL Approved...

  15. Direct-hydrogen-fueled proton-exchange-membrane (PEM) fuel cell system for transportation applications. Quarterly technical progress report No. 4, April 1, 1995--June 30, 1995

    SciTech Connect (OSTI)

    Oei, D.

    1995-08-03T23:59:59.000Z

    This is the fourth Technical Progress Report for DOE Contract No. DE-AC02-94CE50389 awarded to Ford Motor Company on July 1, 1994. The overall objective of this contract is to advance the Proton-Exchange-Membrane (PEM) fuel cell technology for automotive applications. Specifically, the objectives resulting from this contract are to: (1) Develop and demonstrate on a laboratory propulsion system within 2-1/2 years a fully functional PEM Fuel Cell Power System (including fuel cell peripherals, peak power augmentation and controls). This propulsion system will achieve, or will be shown to have the growth potential to achieve, the weights, volumes, and production costs which are competitive with those same attributes of equivalently performing internal combustion engine propulsion systems; (2) Select and demonstrate a baseline onboard hydrogen storage method with acceptable weight, volume, cost, and safety features and analyze future alternatives; and (3) Analyze the hydrogen infrastructure components to ensure that hydrogen can be safely supplied to vehicles at geographically widespread convenient sites and at prices which are less than current gasoline prices per vehicle-mile; (4) Identify any future R&D needs for a fully integrated vehicle and for achieving the system cost and performance goals.

  16. Panel Organization 1. Panel on Structural Geology & Geoengineering

    E-Print Network [OSTI]

    Appendix A Panel Organization 1. Panel on Structural Geology & Geoengineering Chair: Dr. Clarence R Technical Exchange (open) Panel on Structural Geology & Geoengineering Denver, Colorado Topic: DOE & Performance Analysis and the Panel on Structural Geology & Geoengineering Denver, Colorado Topic: Repository

  17. DOE Selects 8(a) Small Business for Technical Support Services at Denver

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"WaveInteractions andDefinition of ShowerheadandFederal Center |

  18. 2011 Residential Energy Efficiency Technical Update Meeting Summary Report: Denver, Colorado - August 9-11, 2011

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The Future of BadTHE U.S.Energy MoreEnergyEnergyWednesday, May0112111

  19. American Wind Energy Association, Denver, May 2005 Uncertainties in Results of Measure-Correlate-Predict Analyses

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    American Wind Energy Association, Denver, May 2005 Uncertainties in Results of Measure-correlate-predict (MCP) algorithms are used to predict the wind resource at target sites for wind power development. MCP methods model the relationship between wind data (speed and direction) measured at the target site

  20. Financing Solar Installations with New Markets Tax Credits: Denver, Colorado (Fact Sheet)

    SciTech Connect (OSTI)

    Coughlin, J.

    2010-09-01T23:59:59.000Z

    Fact sheet provides a brief overview of New Markets Tax Credits (NMTCs), a third-party financing incentive for solar installations in the public sector. NMTCs are intended to encourage economic activity in low-income and disadvantaged neighborhoods. The use of NMTCs in an innovative solar project transaction by the City of Denver, Colorado, is highlighted.

  1. Denver, Colorado: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Denver, Colorado, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  2. Market diffusion and the effect of demonstrations : a study of the Denver Metro Passive Solar Home program

    E-Print Network [OSTI]

    Lilien, Gary L.

    1981-01-01T23:59:59.000Z

    This paper is a report on the reactions to and effects of the Denver Metro Passive Solar Home demonstration program, conducted in the Spring of 1981. The purpose of the program was to provide impetus to builders for ...

  3. Building America Case Study: New Town Builders' Power of Zero Energy Center, Denver, Colorado (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-10-01T23:59:59.000Z

    New Town Builders, a builder of energy efficient homes in Denver, Colorado, offers a zero energy option for all the homes it builds. To attract a wide range of potential homebuyers to its energy efficient homes, New Town Builders created a 'Power of Zero Energy Center' linked to its model home in the Stapleton community of Denver. This case study presents New Town Builders' marketing approach, which is targeted to appeal to homebuyers' emotions rather than overwhelming homebuyers with scientific details about the technology. The exhibits in the Power of Zero Energy Center focus on reduced energy expenses for the homeowner, improved occupant comfort, the reputation of the builder, and the lack of sacrificing the homebuyers' desired design features to achieve zero net energy in the home. The case study also contains customer and realtor testimonials related to the effectiveness of the Center in influencing homebuyers to purchase a zero energy home.

  4. ASARCO to pay over $59 million for damages and cleanup costs at Denver smelting facility

    SciTech Connect (OSTI)

    NONE

    1993-11-01T23:59:59.000Z

    Since 1901, ASARCO, Inc. has owned and operated an 89-acre cadmium-refining smelter in the Globeville neighborhood of north Denver, Colorado. According to complaints filed by EPA and local residents, operations at the smelter have allegedly contaminated the air, ground water, surface water, and soil; contamination from arsenic, cadmium, lead, and zinc has occurred both onsite and offsite. EPA proposed to add the site to the National Priorities List (NPL) in May 1993.

  5. OSH technical reference manual

    SciTech Connect (OSTI)

    Not Available

    1993-11-01T23:59:59.000Z

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  6. The Denver Federal Courthouse: Energy-efficiency in a new Federal building

    SciTech Connect (OSTI)

    Jacobs, P.C.; Holtz, M.J.; Digert, N.; Starkweather, S.; Porter, F.; Clevenger, C.

    1999-07-01T23:59:59.000Z

    The US Federal Courthouse Expansion in Denver, Colorado is twelve story, 16,112 m{sup 2} project to be constructed adjacent to several existing Courthouse and Federal buildings in downtown Denver. The project has been designated a sustainable design showcase by the General Services Administration, and additional funds were made available to the project for sustainable design features. The design achieves a high level of energy efficiency through a combination of strategies that seek first to reduce building lighting and HVAC loads as low as possible, and then satisfy the remaining, loads through a combination of state-of-the-art, high-efficiency mechanical, electrical, and renewable energy systems. The unique attributes of the Denver climate--sunny skies and low humidity, are utilized throughout the design to minimize energy consumption. The resulting building provides a visible expression of sustainability through the incorporation of a set of features that are designed to work together in an integrated energy-efficient building system. Careful life-cycle assessment of materials and building practices results in minimized use of natural resources as well as a healthier environment for the occupants. The use of local materials is emphasized and the building is designed to have a 100-year life. Issues addressed in material selection include sustainability, recyclability, toxicity, and maintenance. The criteria used to establish the success of the design are contained in the Leadership in Energy and Environmental Design (LEED) rating system. Although the building is currently entering final design, a LEED gold rating is expected.

  7. A comprehensive study of Superfund program benefits in the Denver and Tampa Bay metropolitan areas

    SciTech Connect (OSTI)

    Held, K.; Casper, B.; Siddhanti, S.K. [Booz Allen and Hamilton, Inc., McLean, VA (United States); Smith, E.R. [Environmental Protection Agency, Washington, DC (United States)

    1995-12-31T23:59:59.000Z

    The purpose of the study is to evaluate the benefits of the Superfund program in selected geographic areas. The study demonstrates how the cleanup of Superfund sites has improved the overall quality of life of those in the affected communities. The study presents findings on the benefits of Superfund cleanup activity in the Denver, Colorado and Tampa Bay, Florida metropolitan areas. Denver and Tampa Bay were chosen from several areas that the EPA evaluated and screened during the initial phase of the study. These locations were chosen because of a substantial presence of Superfund activities, making it possible to assess the efficacy of the program. Several features make this study unique in terms of its overall goal. The study examines a broad range of benefit categories related to human health, environmental, and socioeconomic effects of Superfund cleanup activities. The study is also designed to assess benefits due to completed, current, and future planned activity at Superfund sites. This assessment covers Federal remedial activities at National Priorities List (NPL) sites, as well as relevant Federal removal actions in the study areas. These benefits are investigated from an area-wide perspective, as opposed to site-by-site, to determine Superfund`s overall effect on the communities in each area. The study consists of two major phases: Phase 1: Screening and ranking 16 prospective geographic areas and selecting Denver and Tampa Bay as the most appropriate areas for in-depth analysis; and Phase 2: Developing methodologies for assessing benefits, collecting relevant data, and analyzing the benefits from Superfund cleanup activity.

  8. Smoke produced by nonurban target-area fires following a nuclear exchange. Technical report, 5 June 1984-5 January 1985

    SciTech Connect (OSTI)

    Bush, B.W.; Small, R.D.

    1985-04-01T23:59:59.000Z

    The amount of smoke that may be produced by wildland or rural fires as a consequence of a large-scale nuclear exchange is estimated. The calculation is based on a compilation of rural military facilities, identified from a wide variety of unclassified sources, together with data on their geographic positions, surrounding vegetation (fuel), and weather conditions. The ignition area (corrected for fuel moisture) and the amount of fire spread are used to calculate the smoke production. The results show a substantially lower estimated smoke production (from wildland fires) than in earlier nuclear-winter studies. The amount varies seasonally and at its peak is less by an order of magnitude that the estimated threshold level necessary for a major attenuation of solar radiation.

  9. Ion exchange technology assessment report

    SciTech Connect (OSTI)

    Duhn, E.F.

    1992-01-01T23:59:59.000Z

    In the execution of its charter, the SRS Ion Exchange Technology Assessment Team has determined that ion exchange (IX) technology has evolved to the point where it should now be considered as a viable alternative to the SRS reference ITP/LW/PH process. The ion exchange media available today offer the ability to design ion exchange processing systems tailored to the unique physical and chemical properties of SRS soluble HLW's. The technical assessment of IX technology and its applicability to the processing of SRS soluble HLW has demonstrated that IX is unquestionably a viable technology. A task team was chartered to evaluate the technology of ion exchange and its potential for replacing the present In-Tank Precipitation and proposed Late Wash processes to remove Cs, Sr, and Pu from soluble salt solutions at the Savannah River Site. This report documents the ion exchange technology assessment and conclusions of the task team.

  10. Ion exchange technology assessment report

    SciTech Connect (OSTI)

    Duhn, E.F.

    1992-12-31T23:59:59.000Z

    In the execution of its charter, the SRS Ion Exchange Technology Assessment Team has determined that ion exchange (IX) technology has evolved to the point where it should now be considered as a viable alternative to the SRS reference ITP/LW/PH process. The ion exchange media available today offer the ability to design ion exchange processing systems tailored to the unique physical and chemical properties of SRS soluble HLW`s. The technical assessment of IX technology and its applicability to the processing of SRS soluble HLW has demonstrated that IX is unquestionably a viable technology. A task team was chartered to evaluate the technology of ion exchange and its potential for replacing the present In-Tank Precipitation and proposed Late Wash processes to remove Cs, Sr, and Pu from soluble salt solutions at the Savannah River Site. This report documents the ion exchange technology assessment and conclusions of the task team.

  11. Influence of Transcontinental arch on Cretaceous listric-normal faulting, west flank, Denver basin

    SciTech Connect (OSTI)

    Davis, T.L.

    1983-08-01T23:59:59.000Z

    Seismic studies along the west flank of the Denver basin near Boulder and Greeley, Colorado illustrate the interrelationship between shallow listric-normal faulting in the Cretaceous and deeper basement-controlled faulting. Deeper fault systems, primarily associated with the Transcontinental arch, control the styles and causative mechanisms of listric-normal faulting that developed in the Cretaceous. Three major stratigraphic levels of listric-normal faulting occur in the Boulder-Greeley area. These tectonic sensitive intervals are present in the following Cretaceous formations: Laramie-Fox Hills-upper Pierre, middle Pierre Hygiene zone, and the Niobrara-Carlile-Greenhorn. Documentation of the listric-normal fault style reveals a Wattenberg high, a horst block or positive feature of the greater Transcontinental arch, was active in the east Boulder-Greeley area during Cretaceous time. Paleotectonic events associated with the Wattenberg high are traced through analysis of the listric-normal fault systems that occur in the area. These styles are important to recognize because of their stratigraphic and structural influence on Cretaceous petroleum reservoir systems in the Denver basin. Similar styles of listric-normal faulting occur in the Cretaceous in many Rocky Mountain foreland basins.

  12. Mechanical Engineering Department Technical Review

    SciTech Connect (OSTI)

    Carr, R.B.; Denney, R.M. (eds.)

    1981-07-01T23:59:59.000Z

    The Mechanical Engineering Department Technical Review is published to inform readers of various technical activities within the Department, promote exchange of ideas, and give credit to personnel who are achieving the results. The report is presented in two parts: technical achievements and publication abstracts. The first is divided into seven sections, each of which reports on an engineering division and its specific activities related to nuclear tests, nuclear explosives, weapons, energy systems, engineering sciences, magnetic fusion, and materials fabrication.

  13. Mechanical Engineering Department technical abstracts

    SciTech Connect (OSTI)

    Denney, R.M. (ed.)

    1982-07-01T23:59:59.000Z

    The Mechanical Engineering Department publishes listings of technical abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). Overall information about current activities of each of the Department's seven divisions precedes the technical abstracts.

  14. Mechanical engineering department technical review

    SciTech Connect (OSTI)

    Carr, R.B. Denney, R.M. (eds.)

    1981-01-01T23:59:59.000Z

    The Mechanical Engineering Department Technical Review is published to: (1) inform the readers of various technical activities within the department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical acievements and publication abstracts. The first is divided into eight sections, one for each division in the department providing the reader with the names of the personnel and the division accomplishing the work.

  15. Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition November 11-17, Denver, Colorado USA

    E-Print Network [OSTI]

    Guo, Zhixiong "James"

    /effusion cooling, which is also one of the cooling techniques used to protect the blade surface from external hot November 11-17, Denver, Colorado USA IMECE-63649 NUMERICAL SIMULATION OF IMPINGING COOLING ON THE LEADING for impingement/effusion cooling on the leading edge of a turbine blade similar to an experimental model tested

  16. Wavelet Applications in Signal and Image Processing IV, SPIE, Denver, 1996 1 Methods for Regular VLSI Implementations of Wavelet Filters

    E-Print Network [OSTI]

    Klappenecker, Andreas

    Wavelet Applications in Signal and Image Processing IV, SPIE, Denver, 1996 1 Methods for Regular VLSI Implementations of Wavelet Filters Andreas Klappenecker, Volker Baumgarte, Armin Nuckel implementation of wavelet lters. The direct form structure, the lattice form structure, and an algebraic

  17. Wavelet Applications in Signal and Image Processing IV, SPIE, Denver, 1996 1 Methods for Regular VLSI Implementations of Wavelet Filters

    E-Print Network [OSTI]

    Klappenecker, Andreas

    Wavelet Applications in Signal and Image Processing IV, SPIE, Denver, 1996 1 Methods for Regular VLSI Implementations of Wavelet Filters Andreas Klappenecker \\Lambda , Volker Baumgarte, Armin N implementation of wavelet filters. The direct form structure, the lattice form structure, and an algebraic

  18. Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition November 11-17, 2011, Denver, Colorado, USA

    E-Print Network [OSTI]

    Guo, Zhixiong "James"

    November 11-17, 2011, Denver, Colorado, USA IMECE2011-63664 A NEW PHASE FUNCTION NORMALIZATION APPROACH and Aerospace Engineering, Rutgers, The State University of New Jersey, 98 Brett Road, Piscataway, NJ 08854, The State University of New Jersey, 98 Brett Road, Piscataway, NJ 08854 guo@jove.rutgers.edu ABSTRACT A new

  19. Priority Firm Exchange .

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeedingTechnical News, informationPriority Firm Exchange . . . . . . . . .

  20. Performance Assessment Community of Practice Technical Exchange

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Interagency Performance and Risk Assessment Community of Practice The Interagency Performance and Risk Assessment Community of Practice (P&RA CoP) was formed to provide a forum to...

  1. Production characteristics and economics of the Denver Julesburg basin Codell/Niobrara play

    SciTech Connect (OSTI)

    Wright, J.D. (Colorado School of Mines (US)); Fields, R.A. Jr. (Colorado Interstate Gas Co. (US))

    1988-11-01T23:59:59.000Z

    Active development of the Upper Cretaceous Niobrara and Codell reservoirs in the Denver-Julesburg basin has resulted in about 2,000 completions since 1981. A detailed evaluation of the producing characteristics and economics of wells in this 800,000-acre (323 760-ha) play show that high-GOR wells and wells in the top one-third percentile will yield a positive discounted net cash flow with today's cost and prices. Reservoir heterogeneity and varying completion techniques used to date will make it difficult to predict with a high degree of certainty the location of future top one-third wells. Ultimate reserves for an average Codell or Codell/Niobrara well are estimated to be 13,000 STB (2067 stock-tank m/sup 3/) oil and 110 MMscf (3.1 x 10/sup 6/ std m/sup 3/) gas. With drilling and completion costs of /185,000, oil and gas prices will have to rise some 40% above current levels to yield acceptable rates of return. A sensitivity analysis is presented to show how changes in well costs, production profiles, and the other variables will affect net present value (NPV).

  2. Technical Guidance

    Broader source: Energy.gov [DOE]

    The Office of Technical Guidance, within the Office of Health, Safety and Security develops and issues Government-wide and Department-wide technical guidance to ensure that classified nuclear...

  3. Undrilled shallow giant trap in Denver basin, Colorado: mountain-front thrust

    SciTech Connect (OSTI)

    Jacob, A.F.

    1983-03-01T23:59:59.000Z

    Along the southwestern margin of the Denver basin, Precambrian rocks have been upthrusted at least 15,000 ft (4600 m) in the Front Range and 8000 to 10,000 ft (2400 to 3000 m) or more in the Wet Mountains. Below the Precambrian, the precise configuration of the strata and the faults is unknown because there are no available seismic or drilling data, but reasonable interpretations can be made by analogy with other similar areas. Important reservoirs in the basin are the Permian Lyons Sandstone, the Lower Cretaceous J and D sandstones, and the Upper Cretaceous Codell Sandstone, Niobrara Formation, and Pierre Shale. Directly overlying the J are the major hydrocarbon-source rocks in the basin. Black shale is interstratified with the Lyons Sandstone in at least one drill hole in front of the upthrust. All source rocks probably reached maturity in late Cretaceous time and still are generating today. Below the Precambrian, simple upfolding permits an oil column as much as 5000 ft (1500 m) high, or more, the J, and as much as 4000 ft (1200 m) high, or more, in the Lyons, assuming a fault dip of 70/sup 0/ at depth; lower fault dips permit higher oil columns. Clayey fault gouge, breccia, and minute faulting, in a zone that is in many places hundreds of feet wide at the fault, should be a good hydrocarbon seal, like a cork in a tilted 5000-ft (1500 m) high bottle. If the strata roll over to the west to form a large anticline below the Precambrian, a different kind of trap of very large dimensions would be present. Any kind of trap can extend a combined north-south distance of nearly 65 mi (105 km). Even if roll over is absent and the fault dips steeply, drilling depths to most traps are likely to be only several thousand feet.

  4. Seismic expression of structural features on Landsat lineaments: an example from Denver basin

    SciTech Connect (OSTI)

    Shurr, G.W.; Jenkins, J.T. Jr.; Likarish, D.M.

    1985-02-01T23:59:59.000Z

    Lineaments interpreted from Landsat images mark the location and trend of basement faults observed on seismic lines in the eastern Denver basin. Linear features mapped as tone and texture patterns on multispectral scanner images in northeastern Colorado and southwestern Nebraska are used to interpret regional lineaments. Individual linear features up to 25 mi (40 km) long and visible on both bands 5 and 7 define a grid of regional lineaments trending northeast and northwest. Comparisons of lineaments with aeromagnetic and gravity maps and with interpretations of basement geology suggest that lineaments are the boundaries of basement blocks with areas of about 1000 mi/sup 2/ (2590 km/sup 2/). Constituent linear features within the lineament zone probably mark boundaries of smaller blocks of about 50 mi/sup 2/ (130 km/sup 2/). Seismic lines in northeastern Sedgwick County in extreme northeastern Colorado cross linear features that are components of a broad regional lineament that trends northeast and parallels the South Platte River. Seismic data consist of a grid of about 100 mi (160 km) of multifold Vibroseis lines. Basement faults, generally with offsets of less than 100 ft (30 m), are observed in seismic lines that cross some individual linear features. Monoclines and faults are present in Pennsylvanian to Tertiary strata that overlie basement. A time-structure map on the Precambrian and an isochron map of Wolfcamp (Lower Permian) to Precambrian show that the lineament is a 7-mi (11-km) wide zone of small, downdropped basement blocks. Thickening of Permian-Pennsylvanian strata on the downthrown side of faults suggests tectonic activity. Further tectonic activity is indicated by listric faulting in the Cretaceous Niobrara Formation.

  5. Application of Landsat imagery to hydrocarbon exploration in Niobrara Formation, Denver basin

    SciTech Connect (OSTI)

    Merin, I.S.; Moore, W.R.

    1985-02-01T23:59:59.000Z

    The Niobrara Formation produces commercial quantities of oil from fractures in several places in the Denver basin. The Niobrara in this basin is an oil-prone, mature source rock having as much as 3.4% TOC, and has been in the generating window since early Eocene. This implies that hydrocarbon generation from the Niobrara is partly contemporaneous with the Laramide orogeny. The Laramide was a multiple-phase orogenic event that began with compression directed to the east-northeast during the Late Cretaceous to Paleocene and ended with compression directed to the northeast during the Eocene. The authors believe the Eocene phase activated northeast-trending extension fractures that may have acted as loci for storage and migration of hydrocarbons, locally generated in the Niobrara. The auto-fracing pressures related to hydrocarbon generation in the Niobrara theoretically would preferentially open and fill this northeast-trending fracture system. Examination of Landsat imagery shows that zones of northeast-trending lineaments are present throughout the basin. Numerous northeast-trending faults are present in the basin, and many overlie older zones that were reactivated during the Laramide. This suggests that these lineaments are previously unrecognized fracture zones. The authors have defined an exploration fairway within the basin based on subsurface isopach and resistivity mapping. The authors believe that mapping of northeast-trending fractures can help identify leads (within this fairway) prospective for Niobrara production. Support of this concept is the location of several apparently productive Niobrara wells along a zone of northeast-trending lineaments.

  6. Agriculture on Exchange InternationalExchangeProgram

    E-Print Network [OSTI]

    Viglas, Anastasios

    Agriculture on Exchange InternationalExchangeProgram Students enrolled in courses offered through the Faculty of Agriculture and Environment are welcome to apply for exchange. However, to ensure that you Academic Adviser before submitting an exchange application. Undergraduate Agriculture students normally go

  7. Energy-Exchange Project

    SciTech Connect (OSTI)

    Not Available

    1982-04-01T23:59:59.000Z

    The purpose of the study was to determine what energy savings can be achieved by coordinating the resources and requirements of two facilities, the 26th Ward Water Pollution Control Plant (WPCP) and a housing development named Starrett City with its own total energy system. It was determined that three energy exchange options were economically and technically feasible. These include: the transfer of digester gas produced at the 26th Ward to the boilers at the Starrett City's total energy plant (TEP); the transfer of hot water heated at the TEP to the 26th Ward for space and process heating; and the transfer of coal effluent waste water from the 26th Ward to the condenser cooling systems at the TEP. Technical information is presented to support the findings. The report addresses those tasks of the statement of work dedicated to data acquisition, analysis, and energy conservation strategies internal to the Starrett City TEP and the community it supplies as well as to the 26th Ward WPCP. (MCW)

  8. Segmented heat exchanger

    DOE Patents [OSTI]

    Baldwin, Darryl Dean (Lafayette, IN); Willi, Martin Leo (Dunlap, IL); Fiveland, Scott Byron (Metamara, IL); Timmons, Kristine Ann (Chillicothe, IL)

    2010-12-14T23:59:59.000Z

    A segmented heat exchanger system for transferring heat energy from an exhaust fluid to a working fluid. The heat exchanger system may include a first heat exchanger for receiving incoming working fluid and the exhaust fluid. The working fluid and exhaust fluid may travel through at least a portion of the first heat exchanger in a parallel flow configuration. In addition, the heat exchanger system may include a second heat exchanger for receiving working fluid from the first heat exchanger and exhaust fluid from a third heat exchanger. The working fluid and exhaust fluid may travel through at least a portion of the second heat exchanger in a counter flow configuration. Furthermore, the heat exchanger system may include a third heat exchanger for receiving working fluid from the second heat exchanger and exhaust fluid from the first heat exchanger. The working fluid and exhaust fluid may travel through at least a portion of the third heat exchanger in a parallel flow configuration.

  9. Adaptive systems for foreign exchange trading

    E-Print Network [OSTI]

    Fernandez, Thomas

    - cal analysis. Technical analysis attempts to predict markets by identifying patterns in the price;FinancialMarkets Jones CM (2001 & 2002). Much of it has concen- trated on high frequency (intraday) trading exchange markets. Professor Michael Dempster and Graham Bates, both of the Centre for Financial Research

  10. Actuarial Internship Opportunities with Milliman's Denver Health Practice Milliman is the country's most prestigious actuarial consulting firm and has offices worldwide. Milliman is divided into

    E-Print Network [OSTI]

    Bowers, Philip L.

    Actuarial Internship Opportunities with Milliman's Denver Health Practice Milliman is the country each year. To help students acquire actuarial experience prior to graduation, our internship program graduated. In addition to summer internship positions, we will also consider interns who are available full

  11. Top-Down Intelligent Reservoir Models, Integrating Reservoir Engineering with AI&DM Extended Abstract, 2009 AAPG Annual Conventions, Denver Colorado

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    1 Top-Down Intelligent Reservoir Models, Integrating Reservoir Engineering with AI&DM Extended Abstract, 2009 AAPG Annual Conventions, Denver Colorado TOP-DOWN INTELLIGENT RESERVOIR MODELING (TDIRM and the history matched model is used to strategize field development in order to improve recovery. Top

  12. Corrosive resistant heat exchanger

    DOE Patents [OSTI]

    Richlen, Scott L. (Annandale, VA)

    1989-01-01T23:59:59.000Z

    A corrosive and errosive resistant heat exchanger which recovers heat from a contaminated heat stream. The heat exchanger utilizes a boundary layer of innocuous gas, which is continuously replenished, to protect the heat exchanger surface from the hot contaminated gas. The innocuous gas is conveyed through ducts or perforations in the heat exchanger wall. Heat from the heat stream is transferred by radiation to the heat exchanger wall. Heat is removed from the outer heat exchanger wall by a heat recovery medium.

  13. Denver Federal Center Saves Energy, Forges Partnerships Through Super ESPC. Federal Energy Management Program (FEMP) ESPC Case Study

    SciTech Connect (OSTI)

    Not Available

    2002-01-01T23:59:59.000Z

    The General Services Administration is not just replacing aging heating and cooling equipment and reducing maintenance costs at the 670-acre Denver Federal Center (DFC). The GSA is also helping the government save about $450,000 in annual energy costs, conserve nearly 11 million gallons of water per year, and reduce annual carbon dioxide emissions by 15.9 million pounds, all by making use of the Department of Energy's Super Energy Savings Performance Contracts (Super ESPCs) at the DFC. Under these contracts, an energy services provider pays the up-front project costs and is then repaid over the contracts term out of the resulting energy cost savings. This two-page case study, prepared by NREL for the DOE Federal Energy Management Program (FEMP), demonstrates how the GSA forged new project partnerships, improved the DFCs boiler plant, and acquired efficient new chillers, motors, controls, and lighting by placing two delivery orders for this work under FEMPs Central Region Super ESPC.

  14. Concept selection northwest boundary containment system. Rocky Mountain Arsenal, Denver, Colorado

    SciTech Connect (OSTI)

    Anderson, B.L.; Bergeron, P.

    1981-08-01T23:59:59.000Z

    RMA and USATHAMA have been tasked with developing a preliminary conceptual design for the Northwest Boundary Contamination Control System. Specific tasks included in this program follow: (1) Provide a Concept Selection with supporting Rationale for the recommended control system. This design will include the number of dewatering and recharge wells, the type of treatment system, the monitoring well requirements, the spacing of wells, the location of the barrier and wells, and the expected performance of the system components; (2) Provide a buy versus lease analysis for the treatment system; and (3) Prepare a 1391C and PDB-1 Document for submission from the technical operations directorate to the installation service directorate at RMA.

  15. Woven heat exchanger

    DOE Patents [OSTI]

    Piscitella, R.R.

    1984-07-16T23:59:59.000Z

    This invention relates to a heat exchanger for waste heat recovery from high temperature industrial exhaust streams. In a woven ceramic heat exchanger using the basic tube-in-shell design, each heat exchanger consisting of tube sheets and tube, is woven separately. Individual heat exchangers are assembled in cross-flow configuration. Each heat exchanger is woven from high temperature ceramic fiber, the warp is continuous from tube to tube sheet providing a smooth transition and unitized construction.

  16. Optimizing PT Arun LNG main heat exchanger

    SciTech Connect (OSTI)

    Irawan, B. [PT Arun NGL Co., Sumatra (Indonesia)

    1995-12-01T23:59:59.000Z

    The capacity of a LNG liquefaction unit has been increased by upgrading the refrigeration system, without making changes to the main heat exchanger (MHE). It is interesting, that after all modifications were completed, a higher refrigerant circulation alone could not increase LNG production. However, by optimizing the refrigerant component ratio, the UA of the MHE increased and LNG production improved. This technical evaluation will provide recommendations and show how the evaluation of the internal temperature profile helped optimize the MHE operating conditions.

  17. Research on thermophoretic and inertial aspects of ash particle deposition on heat exchanger surfaces in coal-fired equipment. Quarterly technical report No. 6, December 1, 1987--February 28, 1988

    SciTech Connect (OSTI)

    Rosner, D.E.

    1988-03-01T23:59:59.000Z

    During the present reporting period, we have initiated work on (a) the interpretation of our recent data (see QTR5) on deposition rates under the simultaneous influence of inertia and thermophoresis, (b) the possible rate of particle photophoresis in environments characterized by high radiative heat loads. and (c) the influence of particle size distributions on total mass deposition rates. The fruits of these initiatives will be reported in subsequent quarterly technical reports. Here, we focus on our recent theoretical results in the important but previously uncharted area of the relations between particulate deposition mechanisms, deposit microstructure and deposit properties. Experimental verification of some of the most interesting predictions will be the subject of future HTCRE-Lab studies. Recent discussions with fouling engineers have convinced us that despite recent advances in our ability to predict particle deposition rates in convective-diffusion environments, the important connection between resulting deposit properties (effective thermal conductivity permeability, {hor_ellipsis}) and deposition mechanism remain poorly understood and only scarcely studied. Accordingly, as part of this DOE-PETC program we have developed a discrete stochastic model to simulate particulate deposition processes resulting from a combination of deposition mechanisms.

  18. Energy Exchange News

    Broader source: Energy.gov [DOE]

    Please join FEMP Director Tim Unruh and Julia Kelley with Oak Ridge National Laboratory (ORNL) for a presentation on the Energy Exchange. The Energy Exchange is a new 2 1/2 day training opportunity...

  19. Technical Brief

    E-Print Network [OSTI]

    Depleted Uranium; Brian Littleton

    2006-01-01T23:59:59.000Z

    ii iiiFOREWARD The Depleted Uranium Technical Brief is designed to convey available information and knowledge about depleted uranium to EPA Remedial Project Managers, On-Scene Coordinators, contractors, and other Agency managers involved with the remediation of sites contaminated with this material. It addresses relative questions regarding the chemical and radiological health concerns involved with depleted uranium in the environment. This technical brief was developed to address the common misconception that depleted uranium represents only a radiological health hazard. It provides accepted data and references to additional sources for both the radiological and chemical characteristics, health risk as well as references for both the monitoring and measurement and applicable treatment techniques for depleted uranium. Please Note: This document has been changed from the original publication dated

  20. Anion exchange polymer electrolytes

    DOE Patents [OSTI]

    Kim, Yu Seung; Kim, Dae Sik

    2013-09-10T23:59:59.000Z

    Solid anion exchange polymer electrolytes include chemical compounds comprising a polymer backbone with side chains that include guanidinium cations.

  1. Energy Exchange | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exchange Energy Exchange Energy Exchange August 11-13, 2015, Phoenix Convention Center The 2015 Energy Exchange in Phoenix, Arizona, is being launched to provide two-and-a-half...

  2. Technical information

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40Coal StocksProvedFeet)ThousandNumber andCrude StreamCrudeTechnical

  3. Technical Sessions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our InstagramStructureProposedPAGESafety Tag:8,, 20153 To synchronizeTechnical

  4. Microsoft Word - P&RA CoP Techncial Exchange Final Agenda 2014...

    Office of Environmental Management (EM)

    Annual Technical Exchange Meeting December 11 and 12, 2014 The National Atomic Testing Museum 755 E Flamingo Road, Las Vegas, NV 89119 Theme: Best Practices in Performance and Risk...

  5. Compact heat exchangers for condensation applications: Yesterday, today and tomorrow

    SciTech Connect (OSTI)

    Panchal, C.B.

    1993-07-01T23:59:59.000Z

    Compact heat exchangers are being increasingly considered for condensation applications in the process, cryogenic, aerospace, power and refrigeration industries. In this paper, different configurations available for condensation applications are analyzed and the current state-of-the-knowledge for the design of compact condensers is evaluated. The key technical issues for the design and development of compact heat exchangers for condensation applications are analyzed and major advantages are identified. The experimental data and performance prediction methods reported in the literature are analyzed to evaluate the present design capabilities for different compact heat-exchanger configurations. The design flexibility is evaluated for the development of new condensation applications, including integration with other process equipment.

  6. Chicago Climate Exchange, Inc. 2010 Chicago Climate Exchange 1 The Role of Exchanges and Standardization

    E-Print Network [OSTI]

    Chicago Climate Exchange®, Inc.© 2010 Chicago Climate Exchange 1 The Role of Exchanges and Standardization in Reducing Emissions at Scale Michael J. Walsh, Ph.D. Executive Vice President Chicago Climate Exchange, Inc. #12;Chicago Climate Exchange®, Inc.© 2010 Chicago Climate Exchange Pacala-Socolow GHG

  7. Summary of innovative concepts for industrial process improvement: An experimental technology exchange

    SciTech Connect (OSTI)

    Conger, R.L. [Pacific Northwest Lab., Richland, WA (United States); Lee, V.E.; Buel, L.M. [eds.] [Pacific Northwest Lab., Richland, WA (United States)

    1995-08-01T23:59:59.000Z

    This document is a compilation of one-page technical briefs that summarize the highlights of thirty-eight innovations that were presented at the seventh Innovative Concepts Fair, held in Denver, Colorado on April 20--21, 1995. Sixteen of the innovations were funded through the Innovative Concepts Program, and twenty-two innovations represent other state or federally funded programs. The concepts in this year`s fair addressed innovations that can substantially improve industrial processes. Each tech brief describes the need for the proposed concept; the concept being proposed; and the concept`s economics and market potential, key experimental results, and future development needs. A contact block is also included with each flier.

  8. NHI Component Technical Readiness Evaluation System

    SciTech Connect (OSTI)

    Steven R. Sherman; Dane F. Wilson; Steven J. Pawel

    2007-09-01T23:59:59.000Z

    A decision process for evaluating the technical readiness or maturity of components (i.e., heat exchangers, chemical reactors, valves, etc.) for use by the U.S. DOE Nuclear Hydrogen Initiative is described. This system is used by the DOE NHI to assess individual components in relation to their readiness for pilot-scale and larger-scale deployment and to drive the research and development work needed to attain technical maturity. A description of the evaluation system is provided, and examples are given to illustrate how it is used to assist in component R&D decisions.

  9. Optimization of Heat Exchangers

    SciTech Connect (OSTI)

    Ivan Catton

    2010-10-01T23:59:59.000Z

    The objective of this research is to develop tools to design and optimize heat exchangers (HE) and compact heat exchangers (CHE) for intermediate loop heat transport systems found in the very high temperature reator (VHTR) and other Generation IV designs by addressing heat transfer surface augmentation and conjugate modeling. To optimize heat exchanger, a fast running model must be created that will allow for multiple designs to be compared quickly. To model a heat exchanger, volume averaging theory, VAT, is used. VAT allows for the conservation of mass, momentum and energy to be solved for point by point in a 3 dimensional computer model of a heat exchanger. The end product of this project is a computer code that can predict an optimal configuration for a heat exchanger given only a few constraints (input fluids, size, cost, etc.). As VAT computer code can be used to model characteristics )pumping power, temperatures, and cost) of heat exchangers more quickly than traditional CFD or experiment, optimization of every geometric parameter simultaneously can be made. Using design of experiment, DOE and genetric algorithms, GE, to optimize the results of the computer code will improve heat exchanger disign.

  10. A review of the production characteristics and economics of the Denver-Julesburg Basin Codell/Niobrara play in Northeastern Colorado

    SciTech Connect (OSTI)

    Wright, J.D.; Fields, R.A. Jr.

    1986-01-01T23:59:59.000Z

    The Upper Cretaceous Codell sandstone and Niobrara limestone is the source of a major oil and gas play in the west central portion of the Denver-Julesburg Basin. The play is developing in an 800,000-acre (323,748 ha) area north of Denver, Colorado. Even though the first discovery of producible hydrocarbons in the Codell was made in 1955, few wells in the study area were completed in the Codell and Niobrara prior to 1981. Approximately 1,170 wells were completed between 1981 and Decenber 1985 in the Codell, either singly or multiply with other formations. Development on 40-acre (16 ha) spacing over the entire 800,000 acres (323,748 ha) could result in 20,000 wells being drilled or recompleted into the Codell. Production profiles of Codell and Codell/Niobrara wells are characterized by very rapid initial declines followed by a gradual flattening, which is typical of low-permeability formations. Average production profiles were developed for Codell and Codell/Niobrara Wells for use in the economic analyses. Production data was also analyzed based on area and operator. Cumulative gas-oil ratios after 12 months of production were mapped and contoured for Codell wells. Economic analyses using both constant and escalated prices and costs are presented for five different production profiles. Sensitivities of net present value to oil and gas prices, drilling and completion costs, operating and maintenance costs, and various production profiles are analyzed and presented in a spider diagram.

  11. Technical Consultant Report Template

    Broader source: Energy.gov [DOE]

    Technical Consultant Report Template, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  12. United States-Russia exchange visits

    SciTech Connect (OSTI)

    Desmond, W.J.; Czajkowski, A.F. [USDOE, Washington, DC (United States). Office of Nonproliferation and National Security; Zack, N.R. [Los Alamos National Lab., NM (United States); Martin, H.R. [USDOE New Brunswick Lab., Argonne, IL (United States); Gardner, B. [Sandia National Labs., Albuquerque, NM (United States); Schlegel, S. [Pacific Northwest Lab., Richland, WA (United States); Von Hippel, F. [US Office of Science and Technology Policy, Washington, DC (United States)

    1995-09-01T23:59:59.000Z

    The Department of Energy, under a government-to-government program, hosted the first visit with the Russian Federation to exchange information and technologies for special nuclear material control, accounting, and physical protection at a plutonium storage facility. The Russian specialists toured a storage facility at the Hanford Site near Richland, Washington, and were shown the physical protection and materials control systems that DOE employs to protect excess nuclear materials. Technical discussions included topics associated with protective forces and their operation, perimeter and interior intrusion detection and assessment equipment/systems, vulnerability assessment demonstrations, and the vault monitoring and materials control systems. In October, the Russian Federation hosted a reciprocal visit to the Mayak Enterprise civil plutonium storage facility, previously known as Chelyabinsk-65. The US specialists participated in technical discussions on the protection and control of plutonium and supported an evaluation of safeguards and security at the Mayak storage facility.

  13. APS: Denver, CO

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearchSOLICITATIONIMODI FICATION OF CONTRACT 1 OTATI OEP AEGraphic of091Kaleko for

  14. Anion exchange membrane

    DOE Patents [OSTI]

    Verkade, John G; Wadhwa, Kuldeep; Kong, Xueqian; Schmidt-Rohr, Klaus

    2013-05-07T23:59:59.000Z

    An anion exchange membrane and fuel cell incorporating the anion exchange membrane are detailed in which proazaphosphatrane and azaphosphatrane cations are covalently bonded to a sulfonated fluoropolymer support along with anionic counterions. A positive charge is dispersed in the aforementioned cations which are buried in the support to reduce the cation-anion interactions and increase the mobility of hydroxide ions, for example, across the membrane. The anion exchange membrane has the ability to operate at high temperatures and in highly alkaline environments with high conductivity and low resistance.

  15. Heat and mass exchanger

    DOE Patents [OSTI]

    Lowenstein, Andrew (Princeton, NJ); Sibilia, Marc J. (Princeton, NJ); Miller, Jeffrey A. (Hopewell, NJ); Tonon, Thomas (Princeton, NJ)

    2007-09-18T23:59:59.000Z

    A mass and heat exchanger includes at least one first substrate with a surface for supporting a continuous flow of a liquid thereon that either absorbs, desorbs, evaporates or condenses one or more gaseous species from or to a surrounding gas; and at least one second substrate operatively associated with the first substrate. The second substrate includes a surface for supporting the continuous flow of the liquid thereon and is adapted to carry a heat exchange fluid therethrough, wherein heat transfer occurs between the liquid and the heat exchange fluid.

  16. Heat and mass exchanger

    DOE Patents [OSTI]

    Lowenstein, Andrew (Princeton, NJ); Sibilia, Marc J. (Princeton, NJ); Miller, Jeffrey A. (Hopewell, NJ); Tonon, Thomas (Princeton, NJ)

    2011-06-28T23:59:59.000Z

    A mass and heat exchanger includes at least one first substrate with a surface for supporting a continuous flow of a liquid thereon that either absorbs, desorbs, evaporates or condenses one or more gaseous species from or to a surrounding gas; and at least one second substrate operatively associated with the first substrate. The second substrate includes a surface for supporting the continuous flow of the liquid thereon and is adapted to carry a heat exchange fluid therethrough, wherein heat transfer occurs between the liquid and the heat exchange fluid.

  17. NNSA hosts Illinois emergency responders during technical exchange meeting

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA Approved: 5-13-14 FEDERAL EMPLOYEE OCCUPATIONALSecurity| National Nuclear

  18. Sandia National Laboratories: Malware Technical Exchange Meeting (MTEM)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol HomeFacebook Twitter YouTube Flickr RSS TopLivermore Livermore2014 2014

  19. Technical Information Exchange on Pyrolysis Oil: Potential for a renewable

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy Solar Decathlon | Department ofHeating Oil Substation

  20. Technical Exchange and Cooperation Agreement between the Department of

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2, 2015 - January 16, 2015MeetingsElectric

  1. External Technical Review Report for Small Column Ion Exchange Technology

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial602 1,39732 DOEDepartment of EnergyEric J.ExploringExternal

  2. Sandia National Laboratories: MTEM 2014: Malware Technical Exchange

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiationImplementingnpitche Home AboutMeeting: Program Agenda Program Agenda Tuesday

  3. Sandia National Laboratories: MTEM 2014: Malware Technical Exchange

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiationImplementingnpitche Home AboutMeeting: Program Agenda Program Agenda

  4. Sandia National Laboratories: MTEM 2014: Malware Technical Exchange

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiationImplementingnpitche Home AboutMeeting: Program Agenda Program AgendaMeeting:

  5. Sandia National Laboratories: MTEM 2014: Malware Technical Exchange

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiationImplementingnpitche Home AboutMeeting: Program Agenda Program

  6. Active microchannel heat exchanger

    DOE Patents [OSTI]

    Tonkovich, Anna Lee Y. (Pasco, WA) [Pasco, WA; Roberts, Gary L. (West Richland, WA) [West Richland, WA; Call, Charles J. (Pasco, WA) [Pasco, WA; Wegeng, Robert S. (Richland, WA) [Richland, WA; Wang, Yong (Richland, WA) [Richland, WA

    2001-01-01T23:59:59.000Z

    The present invention is an active microchannel heat exchanger with an active heat source and with microchannel architecture. The microchannel heat exchanger has (a) an exothermic reaction chamber; (b) an exhaust chamber; and (c) a heat exchanger chamber in thermal contact with the exhaust chamber, wherein (d) heat from the exothermic reaction chamber is convected by an exothermic reaction exhaust through the exhaust chamber and by conduction through a containment wall to the working fluid in the heat exchanger chamber thereby raising a temperature of the working fluid. The invention is particularly useful as a liquid fuel vaporizer and/or a steam generator for fuel cell power systems, and as a heat source for sustaining endothermic chemical reactions and initiating exothermic reactions.

  7. Energy Exchange Schedule

    Broader source: Energy.gov [DOE]

    The schedule for Energy Exchange is now available. Attendees will have the option of attending a variety of training sessions offered within 10 tracks during the times listed below. Session details...

  8. Radial flow heat exchanger

    DOE Patents [OSTI]

    Valenzuela, Javier (Hanover, NH)

    2001-01-01T23:59:59.000Z

    A radial flow heat exchanger (20) having a plurality of first passages (24) for transporting a first fluid (25) and a plurality of second passages (26) for transporting a second fluid (27). The first and second passages are arranged in stacked, alternating relationship, are separated from one another by relatively thin plates (30) and (32), and surround a central axis (22). The thickness of the first and second passages are selected so that the first and second fluids, respectively, are transported with laminar flow through the passages. To enhance thermal energy transfer between first and second passages, the latter are arranged so each first passage is in thermal communication with an associated second passage along substantially its entire length, and vice versa with respect to the second passages. The heat exchangers may be stacked to achieve a modular heat exchange assembly (300). Certain heat exchangers in the assembly may be designed slightly differently than other heat exchangers to address changes in fluid properties during transport through the heat exchanger, so as to enhance overall thermal effectiveness of the assembly.

  9. 1996 DOE technical standards program workshop: Proceedings

    SciTech Connect (OSTI)

    NONE

    1996-07-01T23:59:59.000Z

    The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOE representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.

  10. Strategic plan for oil shale siting reresearch. Proceedings of a planning exercise, November 4-5, 1985, Denver, Colorado

    SciTech Connect (OSTI)

    Hinman, G.; Barr, S.; Peterson, E.J.; Williams, M.D. (eds.)

    1986-07-01T23:59:59.000Z

    A strategic planning exercise on environmental research and policy to guide oil shale development was held in November 1985. Seventeen participants representing a cross section of interests and technical disciplines identified, from almost 200 suggested issues, 13 strategic issues in four general categories: policy, source characterization and pollutant generation, transport and impact, and risk assessment. The group reached a consensus on the technical objective for each issue and recommendations to address the objective. Each participant has at least several years' experience in some phase of oil shale endeavor. Therefore, a consensus from this group can be a valuable guide for agencies seeking to develop the oil shale resource while also protecting the environment and public health. This document is an attempt to concisely state the issues discussed by the group and thereby serve as a planning guide for oil shale environmental research.

  11. Kinetics of the smectite to illite transformation in the Denver Basin: Clay mineral, K-Ar data, and mathematical model results

    SciTech Connect (OSTI)

    Elliot, W.C.; Aronson, J.L.; Matisoff, G. (Case Western Reserve Univ., Cleveland, OH (United States)); Gautier, D.L. (Geological Survey, Denver, CO (United States))

    1991-03-01T23:59:59.000Z

    Clay mineral data, potassium-argon (K-Ar) ages, and mathematical model simulations indicate the important kinetic factors controlling the smectite to illite transformation (illitization) in Upper Cretaceous Mowry and Niobrara core and outcrop bentonites from the Denver basin. The data also provide additional information on the thermal history of the basin. Data show that both the percentages of illite layers and the K-Ar ages of mixed layer illite-smectite (I/S) increase with increasing depths of burial, and this trend was simulated mathematically employing a very simplified burial model with a fifth-order overall kinetic expression for the information of illite. For most of the basin, the data is compatible with I/S having been formed in response to increased temperature from progressive burial, because the oldest K-Ar ages of I/S are from the deepest buried I/S along the basin axis. In addition, these data qualitatively suggest that I/S even as small as <0.1 {mu}m retains radiogenic argon under Denver basin burial temperatures. I/S separated from drill core bentonites from the Watenberg gas field, astride the basin axis and known to have been subjected to an anomalously high temperature history, are the most illitic and among the oldest measured from core in this study. The ages of illitization (about 60 Ma) are coincident with the Laramide time of structural development of the basin and uplift of the Front Range. The reconstructions of the burial history, and the modeling of the timing and extent of illitization, suggest that the area of the Wattenberg as field was an upper Cretaceous depocenter, an area of relatively deeper burial along the basin axis.

  12. Federal Technical Capability Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-05-18T23:59:59.000Z

    Provides requirements and responsibilities to ensure recruitment and hiring of technically capable personnel to retain critical technical capabilities within the Department at all times. Cancels DOE M 426.1-1. Canceled by DOE O 426.1.

  13. Technical Fact Sheets

    Broader source: Energy.gov [DOE]

    Technical Fact Sheets (TFS) provide summary-level information on the impact of new, deployed, applied, and/or planned technical approaches supporting EM cleanup projects.  The TFS is presented as a...

  14. Water Resources Center, Desert Research Institute Annual Technical Report

    E-Print Network [OSTI]

    modeling efforts, quantify the flux of groundwater nutrients to the lower Truckee River; 2. Using benchWater Resources Center, Desert Research Institute Annual Technical Report FY 2001 Introduction Research Program #12;A Multi-Level Approach to Modeling Ground- and Surface Water Exchange

  15. Federal Technical Capability

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-11-19T23:59:59.000Z

    This directive defines requirements and responsibilities for meeting the Department of Energy (DOE) commitment to recruiting, deploying, developing, and retaining a technically competent workforce that will accomplish DOE missions in a safe and efficient manner through the Federal Technical Capability Program (FTCP). Cancels DOE M 426.1-1A, Federal Technical Capability Manual.

  16. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-02-23T23:59:59.000Z

    The Order promotes DOE's use of Voluntary Consensus Standards (VCS) as the primary method for application of technical standards and establishes and manages the DOE Technical Standards Program (TSP) including technical standards development, information, activities, issues, and interactions. Admin Chg 1 dated 3-12-13.

  17. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-11-19T23:59:59.000Z

    The Technical Standards Program (TSP) promotes the use of voluntary consensus standards by the Department of Energy (DOE), provides DOE with the means to develop needed technical standards, and manages overall technical standards information, activities, issues, and interactions. Cancels DOE O 1300.2A. Canceled by DOE O 252.1A

  18. Ion exchange phenomena

    SciTech Connect (OSTI)

    Bourg, I.C.; Sposito, G.

    2011-05-01T23:59:59.000Z

    Ion exchange phenomena involve the population of readily exchangeable ions, the subset of adsorbed solutes that balance the intrinsic surface charge and can be readily replaced by major background electrolyte ions (Sposito, 2008). These phenomena have occupied a central place in soil chemistry research since Way (1850) first showed that potassium uptake by soils resulted in the release of an equal quantity of moles of charge of calcium and magnesium. Ion exchange phenomena are now routinely modeled in studies of soil formation (White et al., 2005), soil reclamation (Kopittke et al., 2006), soil fertilitization (Agbenin and Yakubu, 2006), colloidal dispersion/flocculation (Charlet and Tournassat, 2005), the mechanics of argillaceous media (Gajo and Loret, 2007), aquitard pore water chemistry (Tournassat et al., 2008), and groundwater (Timms and Hendry, 2007; McNab et al., 2009) and contaminant hydrology (Chatterjee et al., 2008; van Oploo et al., 2008; Serrano et al., 2009).

  19. Laser Assisted Emittance Exchange

    SciTech Connect (OSTI)

    Xiang, Dao; /SLAC

    2012-06-11T23:59:59.000Z

    We describe here the laser assisted emittance exchange (LAEE) technique. A laser operating in the transverse mode (TEM10 or TEM01) is used to interact with the electron beam in a dispersive region and to initiate the transverse-to-longitudinal emittance exchange. It is shown that with the LAEE one can generate an electron beam with ultralow transverse emittance, which allows one to significantly bring down the size of an X-ray free electron laser (FEL) and greatly extend the availability of these light sources. The technique can also be used to enhance the performances of X-ray FELs in storage rings. The timing and energy jitter problems for the standard emittance exchange and LAEE techniques are also discussed.

  20. A corrosive resistant heat exchanger

    DOE Patents [OSTI]

    Richlen, S.L.

    1987-08-10T23:59:59.000Z

    A corrosive and erosive resistant heat exchanger which recovers heat from a contaminated heat stream. The heat exchanger utilizes a boundary layer of innocuous gas, which is continuously replenished, to protect the heat exchanger surface from the hot contaminated gas. The innocuous gas is pumped through ducts or perforations in the heat exchanger wall. Heat from the heat stream is transferred by radiation to the heat exchanger wall. Heat is removed from the outer heat exchanger wall by a heat recovery medium. 3 figs., 3 tabs.

  1. Munich, Germany Exchange Program

    E-Print Network [OSTI]

    Fernandez, Eduardo

    Munich, Germany Exchange Program Ludwig-Maximilians-Universitat Founded in 1472, Ludwig talented scholars and students from all over the world. As one of Germany's most dynamic universities, LMU administration, and geosciences to name a few. Most courses are offered in Germany, but many departments offer

  2. Heat transfer in the plate heat exchanger of an ammonia-synthesis column

    SciTech Connect (OSTI)

    Obolentsev, Y.G.; Chus', M.S.; Norobchanskii, O.A.; Teplitshi, Y.S.; Tovazhnyanskii, L.L.

    1983-01-01T23:59:59.000Z

    The planning and construction of high-capacity synthetic ammonia plants requires the development and fabrication of unique, high unit-power equipment with high technical and economic characteristics. In foreign and domestic practice, tubular heat exchangers with relatively low heat-transfer coefficients are used. Plate heat exchangers are a promising alternative. They are compact and have a high heat energy efficiency and a relatively small metal content. To make an experimental check of the operating capability of a plate heat exchanger under ammonia production conditions, a welded plate heat exchanger was designed for an ammonia synthesis column 800mm in diameter. On prolonged testing (four years), the device provided an autothermal operating mode in the column and the heat transfer coefficient was practically constant for fixed space velocities. Consequently, the heat exchange surface was not contaminated significantly with catalyst dust, confirmed by visual observation of the heat exchanger after disassembly.

  3. Building Energy Data Exchange Specification Scoping Report |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Energy Data Exchange Specification Scoping Report Building Energy Data Exchange Specification Scoping Report The Building Energy Data Exchange Specification (BEDES),...

  4. Ecosystem Restoration through Interdisciplinary Exchange

    E-Print Network [OSTI]

    Sachs, Frederick

    Ecosystem Restoration through Interdisciplinary Exchange David M. Blersch dblersch Shade of Blue and You 21 September 2010 #12;National Science Foundation Ecosystem Restoration through;National Science Foundation Ecosystem Restoration through Interdisciplinary Exchange UB's ERIE Program www

  5. ION EXCHANGE PERFORMANCE OF TITANOSILICATES, GERMANATES AND CARBON NANOTUBES

    SciTech Connect (OSTI)

    Alsobrook, A.; Hobbs, D.

    2013-04-24T23:59:59.000Z

    This report presents a summary of testing the affinity of titanosilicates (TSP), germanium-substituted titanosilicates (Ge-TSP) and multiwall carbon nanotubes (MWCNT) for lanthanide ions in dilute nitric acid solution. The K-TSP ion exchanger exhibited the highest affinity for lanthanides in dilute nitric acid solutions. The Ge-TSP ion exchanger shows promise as a material with high affinity, but additional tests are needed to confirm the preliminary results. The MWCNT exhibited much lower affinities than the K-TSP in dilute nitric acid solutions. However, the MWCNT are much more chemically stable to concentrated nitric acid solutions and, therefore, may candidates for ion exchange in more concentrated nitric acid solutions. This technical report serves as the deliverable documenting completion of the FY13 research milestone, M4FT-13SR0303061 – measure actinide and lanthanide distribution values in nitric acid solutions with sodium and potassium titanosilicate materials.

  6. Thermoelectric heat exchange element

    DOE Patents [OSTI]

    Callas, James J. (Peoria, IL); Taher, Mahmoud A. (Peoria, IL)

    2007-08-14T23:59:59.000Z

    A thermoelectric heat exchange module includes a first substrate including a heat receptive side and a heat donative side and a series of undulatory pleats. The module may also include a thermoelectric material layer having a ZT value of 1.0 or more disposed on at least one of the heat receptive side and the heat donative side, and an electrical contact may be in electrical communication with the thermoelectric material layer.

  7. Proceedings: Heat exchanger workshop

    SciTech Connect (OSTI)

    Not Available

    1987-07-01T23:59:59.000Z

    Heat transfer processes are of controlling importance in the operation of a thermal power plant. Heat exchangers are major cost items and are an important source of problems causing poor power plant availability and performance. A workshop to examine the improvements that can be made to heat exchangers was sponsored by the Electric Power Research Institute (EPRI) on June 10-11, 1986, in Palo Alto, California. This workshop was attended by 25 engineers and scientists representing EPRI-member utilities and EPRI consultants. A forum was provided for discussions related to the design, operation and maintenance of utility heat transfer equipment. The specific objectives were to identify research directions that could significantly improve heat exchanger performance, reliability and life cycle economics. Since there is a great diversity of utility heat transfer equipment in use, this workshop addressed two equipment categories: Boiler Feedwater Heaters (FWH) and Heat Recovery Steam Generators (HRSG). The workshop was divided into the following panel sessions: functional design, mechanical design, operation, suggested research topics, and prioritization. Each panel session began with short presentations by experts on the subject and followed by discussions by the attendees. This report documents the proceedings of the workshop and contains recommendations of potentially valuable areas of research and development. 4 figs.

  8. Technical Talks Timing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a technical talk is to communicate information to the audience. The Speaker Keep in mind that your objective is communication of information. Mumbling, monotone speech and use...

  9. DOE Technical Assistance Program

    Broader source: Energy.gov (indexed) [DOE]

    Designing Effective Residential Retrofit Programs eere.energy.gov The Parker Ranch installation in Hawaii DOE Technical Assistance Program Quality Assurance for Residential...

  10. Residential Exchange Program Settlement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Technical squestionnairesquestionnaires Agreement Proceeding

  11. Residential Exchange Program Settlement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Technical squestionnairesquestionnaires Agreement Proceeding

  12. Use of comparative geothermometry to reconstruct burial history and timing of oil generation and migration in Niobrara Formation, Berthoud State 4 well, Denver basin, Colorado

    SciTech Connect (OSTI)

    Crysdale, B.L.; Barker, C.E. (Geological survey, Denver, CO (USA))

    1989-09-01T23:59:59.000Z

    Petroleum production from the Upper Cretaceous Niobrara limestone in the Denver basin is largely restricted to the more permeable, fractured portions of the formation. Berthoud State 4 well cores from about 880 to 975 m (2,900-3,200 ft) depth contain zoned calcite in nearly vertical veins. Primary two-phase oil inclusions in these veins homogenize at a mean temperature of about 85{degree}C. Mean random vitrinite-reflectance (R{sub m}) over this same depth interval is 0.65%. Interpretation of this R{sub m}, using an empirical calibration with peak burial-temperature (T{sub peak}), indicates that these rocks reached at T{sub peak} of approximately 100{degree}c. Published clay mineral assemblage data suggest T{sub peak} was at least 100{degree}c. Burial history reconstruction for Berthoud State 4 suggests T{sub peak} was reached about 70 Ma, quickly followed by a 30{degree}-40{degree}C decrease due to uplift and erosion of approximately 3,000 ft of overburden. This short time at peak burial temperature fixes the time of oil migration at near-maximum burial.

  13. Federal Technical Capability

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-11-19T23:59:59.000Z

    To define requirements and responsibilities for meeting the Department of Energy (DOE) commitment to recruiting, deploying, developing, and retaining a technically competent workforce that will accomplish DOE missions in a safe and efficient manner through the Federal Technical Capability Program (FTCP). Chg. 1 dated 9-20-11 Cancels DOE O 426.1. Cancels DOE P 426.1.

  14. About Technical Assistance

    Broader source: Energy.gov [DOE]

    As technologies proceed along the development pipeline, most face major hurdles as they attempt to enter commercial markets. Our Technical Assistance program helps lower a range of institutional barriers to prepare innovative, energy-efficient technologies and energy management systems for full commercial deployment. These projects and activities address barriers that are not technical, Technology Readiness Level 9.

  15. Technical Report Computer Laboratory

    E-Print Network [OSTI]

    Haddadi, Hamed

    the opportunity to consider a physical attack, with very little to lose. We thus set out to analyse the deviceTechnical Report Number 592 Computer Laboratory UCAM-CL-TR-592 ISSN 1476-2986 Unwrapping J. Murdoch Technical reports published by the University of Cambridge Computer Laboratory are freely

  16. Federal Technical Capability Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-06-05T23:59:59.000Z

    The Federal Technical Capability Manual provides the process for the recruitment, deployment, development, and retention of Federal personnel with the demonstrated technical capability to safely accomplish the Departments missions and responsibilities at defense nuclear facilities. Canceled by DOE M 426.1-1A. Does not cancel other directives.

  17. Depleted Uranium Technical Brief

    E-Print Network [OSTI]

    Depleted Uranium Technical Brief United States Environmental Protection Agency Office of Air and Radiation Washington, DC 20460 EPA-402-R-06-011 December 2006 #12;#12;Depleted Uranium Technical Brief EPA of Radiation and Indoor Air Radiation Protection Division ii #12;iii #12;FOREWARD The Depleted Uranium

  18. MATHEMATICAL ENGINEERING TECHNICAL REPORTS

    E-Print Network [OSTI]

    Yamamoto, Hirosuke

    MATHEMATICAL ENGINEERING TECHNICAL REPORTS A Subband Coding Approach to Control under Limited Data Rates and Message Losses Hideaki ISHII and Shinji HARA (Communicated by Kazuo Murota) METR 2006­22 April METR technical reports are published as a means to ensure timely dissemination of scholarly

  19. Active Technical Standards Managers List

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TECHNICAL STANDARDS PROGRAM ASSIGNMENT TELEPHONEFAXEMAIL NAME DOE FACILITYADDRESS LOC CODE AU-30 Jeff D. Feit DOE Technical Standards Program, Manager U.S. Department of Energy...

  20. The Office of Environmental Management technical reports: a bibliography

    SciTech Connect (OSTI)

    NONE

    1997-07-01T23:59:59.000Z

    The Office of Environmental Management`s (EM) technical reports bibliography is an annual publication that contains information on scientific and technical reports sponsored by the Office of Environmental Management added to the Energy Science and Technology Database from July 1, 1995 through Sept. 30, 1996. This information is divided into the following categories: Focus Areas and Crosscutting Programs. Support Programs, Technology Integration and International Technology Exchange are now included in the General category. EM`s Office of Science and Technology sponsors this bibliography.

  1. Technical Foundations of the Agent Contest 2008

    E-Print Network [OSTI]

    Zachmann, Gabriel

    (Technical Computer Science) Prof. Dr. Gabriel Zachmann (Computer Graphics) #12;Technical Foundations

  2. Technical Standards, Style Guide- August 1, 2000

    Broader source: Energy.gov [DOE]

    Style Guide for the Preparation of DOE Technical Standards (Standards, Handbooks, and Technical Standards Lists)

  3. A Binghamton Exchange Program UNIVERSITY COLLEGE UTRECHT EXCHANGE PROGRAM

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    A Binghamton Exchange Program UNIVERSITY COLLEGE UTRECHT EXCHANGE PROGRAM THE BINGHAMTON PROGRAM AT UNIVERSITY COLLEGE UTRECHT Utrecht University ranks first among Dutch universi- ties and is one of the finest universities in Europe. Students take courses in the University College Utrecht (UCU), Utrecht University

  4. A Binghamton Exchange Program UTRECHT SCHOOL OF ECONOMICS EXCHANGE PROGRAM

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    A Binghamton Exchange Program UTRECHT SCHOOL OF ECONOMICS EXCHANGE PROGRAM THE BINGHAMTON PROGRAM AT UTRECHT SCHOOL OF ECONOMICS Utrecht University ranks first among Dutch universi- ties and is one of the finest universities in Europe. Students take courses in the Utrecht School of Eco- nomics (USE

  5. Technical Planning Basis

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2007-07-11T23:59:59.000Z

    The Guide assists DOE/NNSA field elements and operating contractors in identifying and analyzing hazards at facilities and sites to provide the technical planning basis for emergency management programs. Cancels DOE G 151.1-1, Volume 2.

  6. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-02-23T23:59:59.000Z

    The order establishes the DOE Technical Standards Program. Cancels DOE O 252.1 and DOE G 252.1-1. Admin Chg 1, dated 3-12-13 cancels DOE O 252.1A.

  7. DOE Technical Assistance Program

    Broader source: Energy.gov (indexed) [DOE]

    Solid-State Solutions for Municipal Lighting: What You'll Need to Know eere.energy.gov The Parker Ranch installation in Hawaii DOE Technical Assistance Program Solid-State...

  8. Technology Performance Exchange (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-10-01T23:59:59.000Z

    This fact sheet, 'The Technology Performance Exchange' will be presented at the ET Summit, held at the Pasadena Convention Center on October 15-17, 2012. The Technology Performance Exchange will be a centralized, Web-based portal for finding and sharing energy performance data for commercial building technologies.

  9. Gas Exchange, Partial Pressure Gradients,

    E-Print Network [OSTI]

    Riba Sagarra, Jaume

    Gas Exchange, Partial Pressure Gradients, and the Oxygen Window Johnny E. Brian, Jr., M of circulatory and gas transport physiology, and the best place to start is with normobaric physiology. LIFE affect the precise gas exchange occurring in individual areas of the lungs and body tissues. To make

  10. 4, 125164, 2007 Methanol exchange

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    BGD 4, 125­164, 2007 Methanol exchange between grassland and the atmosphere A. Brunner et al. Title Discussions Biogeosciences Discussions is the access reviewed discussion forum of Biogeosciences Methanol (albrecht.neftel@art.admin.ch) 125 #12;BGD 4, 125­164, 2007 Methanol exchange between grassland

  11. High Temperature Heat Exchanger Project

    SciTech Connect (OSTI)

    Anthony E. Hechanova, Ph.D.

    2008-09-30T23:59:59.000Z

    The UNLV Research Foundation assembled a research consortium for high temperature heat exchanger design and materials compatibility and performance comprised of university and private industry partners under the auspices of the US DOE-NE Nuclear Hydrogen Initiative in October 2003. The objectives of the consortium were to conduct investigations of candidate materials for high temperature heat exchanger componets in hydrogen production processes and design and perform prototypical testing of heat exchangers. The initial research of the consortium focused on the intermediate heat exchanger (located between the nuclear reactor and hydrogen production plan) and the components for the hydrogen iodine decomposition process and sulfuric acid decomposition process. These heat exchanger components were deemed the most challenging from a materials performance and compatibility perspective

  12. Technical Assistance to Developers

    SciTech Connect (OSTI)

    Rockward, Tommy [Los Alamos National Laboratory; Borup, Rodney L. [Los Alamos National Laboratory; Garzon, Fernando H. [Los Alamos National Laboratory; Mukundan, Rangachary [Los Alamos National Laboratory; Spernjak, Dusan [Los Alamos National Laboratory

    2012-07-17T23:59:59.000Z

    This task supports the allowance of technical assistance to fuel-cell component and system developers as directed by the DOE. This task includes testing of novel materials and participation in the further development and validation of single cell test protocols. This task also covers technical assistance to DOE Working Groups, the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Driving Research and Innovation for Vehicle efficiency and Energy sustainability (U.S. Drive) Fuel Cell Technology Team. Assistance includes technical validation of new fuel cell materials and methods, single cell fuel cell testing to support the development of targets and test protocols, and regular advisory participation in other working groups and reviews. This assistance is made available to PEM fuel cell developers by request and DOE Approval. The objectives are to: (1) Support technically, as directed by DOE, fuel cell component and system developers; (2) Assess fuel cell materials and components and give feedback to developers; (3) Assist the DOE Durability Working Group with the development of various new material durability Testing protocols; and (4) Provide support to the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Fuel Cell Technology Team. FY2012 specific technical objectives are: (1) Evaluate novel MPL materials; (2) Develop of startup/ shutdown protocol; (3) Test the impact of hydrophobic treatment on graphite bi-polar plates; (4) Perform complete diagnostics on metal bi-polar plates for corrosion; and (5) Participate and lead efforts in the DOE Working Groups.

  13. Permeation Barrier Coatings for the Helical Heat Exchanger

    SciTech Connect (OSTI)

    Korinko, P.S.

    1999-05-26T23:59:59.000Z

    A permeation barrier coating was specified for the Helical Heat Exchanger (HHE) to minimize contamination through emissions and/or permeation into the nitrogen system for ALARA reasons. Due to the geometry of the HHE, a special coating practice was needed since the conventional method of high temperature pack aluminization was intractable. A survey of many coating companies was undertaken; their coating capabilities and technologies were assessed and compared to WSRC needs. The processes and limitations to coating the HHE are described. Slurry coating appears to be the most technically sound approach for coating the HHE.

  14. Charge exchange molecular ion source

    DOE Patents [OSTI]

    Vella, Michael C.

    2003-06-03T23:59:59.000Z

    Ions, particularly molecular ions with multiple dopant nucleons per ion, are produced by charge exchange. An ion source contains a minimum of two regions separated by a physical barrier and utilizes charge exchange to enhance production of a desired ion species. The essential elements are a plasma chamber for production of ions of a first species, a physical separator, and a charge transfer chamber where ions of the first species from the plasma chamber undergo charge exchange or transfer with the reactant atom or molecules to produce ions of a second species. Molecular ions may be produced which are useful for ion implantation.

  15. Heat exchanger using graphite foam

    DOE Patents [OSTI]

    Campagna, Michael Joseph; Callas, James John

    2012-09-25T23:59:59.000Z

    A heat exchanger is disclosed. The heat exchanger may have an inlet configured to receive a first fluid and an outlet configured to discharge the first fluid. The heat exchanger may further have at least one passageway configured to conduct the first fluid from the inlet to the outlet. The at least one passageway may be composed of a graphite foam and a layer of graphite material on the exterior of the graphite foam. The layer of graphite material may form at least a partial barrier between the first fluid and a second fluid external to the at least one passageway.

  16. Heat exchanger with ceramic elements

    DOE Patents [OSTI]

    Corey, John A. (North Troy, NY)

    1986-01-01T23:59:59.000Z

    An annular heat exchanger assembly includes a plurality of low thermal growth ceramic heat exchange members with inlet and exit flow ports on distinct faces. A mounting member locates each ceramic member in a near-annular array and seals the flow ports on the distinct faces into the separate flow paths of the heat exchanger. The mounting member adjusts for the temperature gradient in the assembly and the different coefficients of thermal expansion of the members of the assembly during all operating temperatures.

  17. Understanding microbe-mineral electron exchange | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    insight into how bacteria, such as S. oneidensis (above), exchange electrons with minerals in their surroundings as part of cellular respiration-a series of electron exchanges...

  18. Advanced Materials for Proton Exchange Membranes | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Advanced Materials for Proton Exchange Membranes Advanced Materials for Proton Exchange Membranes A presentation to the High Temperature Membranes Working Group meeting, May 19,...

  19. Competing effects of magnetocrystalline anisotropy and exchange...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    effects of magnetocrystalline anisotropy and exchange bias in epitaxial FeIrMn bilayers. Competing effects of magnetocrystalline anisotropy and exchange bias in epitaxial FeIrMn...

  20. Residential Exchange History Fact Sheet - June 2007

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    history of BPA's Residential Exchange Program June 2007 F rom its start, the Residential Exchange Program (REP) has been a source of nearly continuous controversy. Its roots go...

  1. Heat exchange assembly

    DOE Patents [OSTI]

    Lowenstein, Andrew; Sibilia, Marc; Miller, Jeffrey; Tonon, Thomas S.

    2004-06-08T23:59:59.000Z

    A heat exchange assembly comprises a plurality of plates disposed in a spaced-apart arrangement, each of the plurality of plates includes a plurality of passages extending internally from a first end to a second end for directing flow of a heat transfer fluid in a first plane, a plurality of first end-piece members equaling the number of plates and a plurality of second end-piece members also equaling the number of plates, each of the first and second end-piece members including a recessed region adapted to fluidly connect and couple with the first and second ends of the plate, respectively, and further adapted to be affixed to respective adjacent first and second end-piece members in a stacked formation, and each of the first and second end-piece members further including at least one cavity for enabling entry of the heat transfer fluid into the plate, exit of the heat transfer fluid from the plate, or 180.degree. turning of the fluid within the plate to create a serpentine-like fluid flow path between points of entry and exit of the fluid, and at least two fluid conduits extending through the stacked plurality of first and second end-piece members for providing first fluid connections between the parallel fluid entry points of adjacent plates and a fluid supply inlet, and second fluid connections between the parallel fluid exit points of adjacent plates and a fluid discharge outlet so that the heat transfer fluid travels in parallel paths through each respective plate.

  2. Hear Exchange Assembly

    SciTech Connect (OSTI)

    Lowenstein, Andrew (Princeton, NJ); Sibilia, Marc (Princeton, NJ); Miller, Jeffrey (Rocky Hill, NJ); Tonon, Thomas S. (Princeton, NJ)

    2003-05-27T23:59:59.000Z

    A heat exchange assembly comprises a plurality of plates disposed in a spaced-apart arrangement, each of the plurality of plates includes a plurality of passages extending internally from a first end to a second end for directing flow of a heat transfer fluid in a first plane, a plurality of first end-piece members equaling the number of plates and a plurality of second end-piece members also equaling the number of plates, each of the first and second end-piece members including a recessed region adapted to fluidly connect and couple with the first and second ends of the plate, respectively, and further adapted to be affixed to respective adjacent first and second end-piece members in a stacked formation, and each of the first and second end-piece members further including at least one cavity for enabling entry of the heat transfer fluid into the plate, exit of the heat transfer fluid from the plate, or 180.degree. turning of the fluid within the plate to create a serpentine-like fluid flow path between points of entry and exit of the fluid, and at least two fluid conduits extending through the stacked plurality of first and second end-piece members for providing first fluid connections between the parallel fluid entry points of adjacent plates and a fluid supply inlet, and second fluid connections between the parallel fluid exit points of adjacent plates and a fluid discharge outlet so that the heat transfer fluid travels in parallel paths through each respective plate.

  3. Climate Vison: Resources and Links - Technical Information

    Office of Scientific and Technical Information (OSTI)

    Technical Information Publications Case Studies Publications DOE BestPractices Technical Publications The DOE BestPractices team offers a broad selection of technical publications...

  4. Technical Consultant RFP | Department of Energy

    Energy Savers [EERE]

    RFP Technical Consultant RFP Technical Consultant RFP, from the Tool Kit Framework: Small Town University Energy Program (STEP). C3b Technical Consultant RFP.pdf More Documents &...

  5. Asset Prices and Exchange Rates

    E-Print Network [OSTI]

    Pavlova, Anna

    2003-08-01T23:59:59.000Z

    This paper develops a simple two-country, two-good model, in which the real exchange rate, stock and bond prices are jointly determined. The model predicts that ...

  6. Asset Prices and Exchange Rates

    E-Print Network [OSTI]

    Pavlova, Anna

    2004-11-30T23:59:59.000Z

    This paper develops a simple two-country, two-good model, in which the real exchange rate, stock and bond prices are jointly determined. The model predicts that stock market prices are correlated ...

  7. Energy Efficiency Exchange 2015 Schedule

    Broader source: Energy.gov [DOE]

    The schedule for Energy Efficiency Exchange 2015 is now available. Attendees will have the option of attending a variety of training sessions offered within 10 tracks during the times listed below....

  8. Optimization of Heat Exchanger Cleaning 

    E-Print Network [OSTI]

    Siegell, J. H.

    1986-01-01T23:59:59.000Z

    The performance of heat integration systems is quantified in terms of the amount of heat that is recovered. This decreases with time due to increased fouling of the heat exchange surface. Using the "Total Fouling Related Expenses (TFRE)" approach...

  9. Designing Flexible Heat Exchanger Networks

    E-Print Network [OSTI]

    Gautam, R.; Chen, H. S.; Wareck, J. S.

    Procedures and methods used for designing flexible heat exchanger networks are described. The general approach consists of defining the flexibility problem as a set of cases. Pinch Technology is then used to develop an initial network design...

  10. Vitrification of ion exchange resins

    DOE Patents [OSTI]

    Cicero-Herman, Connie A. (Aiken, SC); Workman, Rhonda Jackson (North Augusta, SC)

    2001-01-01T23:59:59.000Z

    The present invention relates to vitrification of ion exchange resins that have become loaded with hazardous or radioactive wastes, in a way that produces a homogenous and durable waste form and reduces the disposal volume of the resin. The methods of the present invention involve directly adding borosilicate glass formers and an oxidizer to the ion exchange resin and heating the mixture at sufficient temperature to produce homogeneous glass.

  11. Anion exchange polymer electrolytes

    DOE Patents [OSTI]

    Kim, Yu Seung; Kim, Dae Sik; Lee, Kwan-Soo

    2013-07-23T23:59:59.000Z

    Solid anion exchange polymer electrolytes and compositions comprising chemical compounds comprising a polymeric core, a spacer A, and a guanidine base, wherein said chemical compound is uniformly dispersed in a suitable solvent and has the structure: ##STR00001## wherein: i) A is a spacer having the structure O, S, SO.sub.2, --NH--, --N(CH.sub.2).sub.n, wherein n=1-10, --(CH.sub.2).sub.n--CH.sub.3--, wherein n=1-10, SO.sub.2-Ph, CO-Ph, ##STR00002## wherein R.sub.5, R.sub.6, R.sub.7 and R.sub.8 each are independently --H, --NH.sub.2, F, Cl, Br, CN, or a C.sub.1-C.sub.6 alkyl group, or any combination of thereof; ii) R.sub.9, R.sub.10, R.sub.11, R.sub.12, or R.sub.13 each independently are --H, --CH.sub.3, --NH.sub.2, --NO, --CH.sub.nCH.sub.3 where n=1-6, HC.dbd.O--, NH.sub.2C.dbd.O--, --CH.sub.nCOOH where n=1-6, --(CH.sub.2).sub.n--C(NH.sub.2)--COOH where n=1-6, --CH--(COOH)--CH.sub.2--COOH, --CH.sub.2--CH(O--CH.sub.2CH.sub.3).sub.2, --(C.dbd.S)--NH.sub.2, --(C.dbd.NH)--N--(CH.sub.2).sub.nCH.sub.3, where n=0-6, --NH--(C.dbd.S)--SH, --CH.sub.2--(C.dbd.O)--O--C(CH.sub.3).sub.3, --O--(CH.sub.2).sub.n--CH--(NH.sub.2)--COOH, where n=1-6, --(CH.sub.2).sub.n--CH.dbd.CH wherein n=1-6, --(CH.sub.2).sub.n--CH--CN wherein n=1-6, an aromatic group such as a phenyl, benzyl, phenoxy, methylbenzyl, nitrogen-substituted benzyl or phenyl groups, a halide, or halide-substituted methyl groups; and iii) wherein the composition is suitable for use in a membrane electrode assembly.

  12. Technical Report Computer Laboratory

    E-Print Network [OSTI]

    Haddadi, Hamed

    for criminal activity. One general attack route to breach the security is to carry out physical attack afterTechnical Report Number 829 Computer Laboratory UCAM-CL-TR-829 ISSN 1476-2986 Microelectronic report is based on a dissertation submitted January 2009 by the author for the degree of Doctor

  13. MATHEMATICAL ENGINEERING TECHNICAL REPORTS

    E-Print Network [OSTI]

    Yamamoto, Hirosuke

    MATHEMATICAL ENGINEERING TECHNICAL REPORTS Modeling of Contagious Credit Events and Risk Analysis holder. #12;Modeling of Contagious Credit Events and Risk Analysis of Credit Portfolios Suguru YAMANAKA This paper presents a new model of the intensities of contagious credit events such as rating changes

  14. TECHNICAL STANDARDS PROGRAM TOPICAL COMMITTEES

    Broader source: Energy.gov [DOE]

    PurposeThis procedure describes how topical committees are organized and recognized under the Technical Standards Program. 

  15. Business Case for Technical Qualification Program Accreditation...

    Broader source: Energy.gov (indexed) [DOE]

    Business Case for Technical Qualification Program Accreditation Incentives Business Case for Technical Qualification Program Accreditation Incentives TQP Accreditation standardize...

  16. The Oak Ridge Technical Information Center: A trailblazer in federal documentation

    SciTech Connect (OSTI)

    Vaden, W.M.

    1992-01-01T23:59:59.000Z

    This document attempts to record the history of US AEC`s Technical Information Center, from its conception (1947) to 1977. This organization centralizes and manages the issues related to control and dissemination of technical information, to fulfill the provisions of the Atomic Energy Act of 1946. TIC tried to search out and install efficient and economical systems for servicing the various technical information programs. It coordinated a direct organization-to-organization information exchange program, and it also participated in official bilateral exchange programs and in developing information systems for IAEA and Euratom. The work, planning, and strategies employed to achieve goals are chronicled in this document, with 18 chapters arranged into four sections according to different presidential administrations.

  17. The Oak Ridge Technical Information Center: A trailblazer in federal documentation

    SciTech Connect (OSTI)

    Vaden, W.M.

    1992-01-01T23:59:59.000Z

    This softbound book attempts to record the history of US AEC's Technical Information Center, from its conception (1947) to 1977. This organization centralizes and manages the issues related to control and dissemination of technical information, to fulfill the provisions of the Atomic Energy Act of 1946. TIC tried to search out and install efficient and economical systems for servicing the various technical information programs. It coordinated a direct organization-to-organization information exchange program, and it also participated in official bilateral exchange programs and in developing information systems for IAEA and Euratom. The work, planning, and strategies employed to achieve goals are chronicled in this book, whose 18 chapters are arranged into four sections according to different presidential administrations.

  18. Final Technical Report

    SciTech Connect (OSTI)

    Maxwell, Mike, J., P.E.

    2012-08-30T23:59:59.000Z

    The STI product is the Final Technical Report from ReliOn, Inc. for contract award DE-EE0000487: Recovery Act PEM Fuel Cell Systems Providing Emergency Reserve and Backup Power. The program covered the turnkey deployment of 431 ReliOn fuel cell systems at 189 individual sites for AT&T and PG&E with ReliOn functioning as the primary equipment supplier and the project manager. The Final Technical Report provides an executive level summary, a comparison of the actual accomplishments vs. the goals and objectives of the project, as well as a summary of the project activity from the contract award date of August 1, 2009 through the contract expiration date of December 31, 2011. Two photos are included in the body of the report which show hydrogen storage and bulk hydrogen refueling technologies developed as a result of this program.

  19. Honda Transmission Technical Center

    High Performance Buildings Database

    Russells Point, OH The Honda Transmission Technical Center is located on the Honda of America Manufacturing Plant facility site in Russells Point, Ohio. This facility is used for product engineering and market quality testing and analysis of automatic transmissions. The building contains a large workshop area for ten cars, a future dynamometer, two laboratories, an open office area, three conference rooms, a break room, restrooms, and related support areas.

  20. Technical Surveillance Countermeasures Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1993-06-18T23:59:59.000Z

    To prescribe policies, responsibilities and authorities to establish Department of Energy (DOE) Technical Surveillance Countermeasures (TSCM) Program. This order implements the DOE TSCM Procedural Guide, DOE TSCM Operations Manual, DOE TSCM Report Writing Guide and Threat Assessment Scheduling System (TASS) which contain classified policies and procedures concerning the DOE TSCM Program. Cancels DOE 5636.3A. Canceled by DOE O 471.2 dated 9-28-95.

  1. Technical approach document

    SciTech Connect (OSTI)

    Not Available

    1989-12-01T23:59:59.000Z

    The Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, Public Law 95-604 (PL95-604), grants the Secretary of Energy the authority and responsibility to perform such actions as are necessary to minimize radiation health hazards and other environmental hazards caused by inactive uranium mill sites. This Technical Approach Document (TAD) describes the general technical approaches and design criteria adopted by the US Department of Energy (DOE) in order to implement remedial action plans (RAPS) and final designs that comply with EPA standards. It does not address the technical approaches necessary for aquifer restoration at processing sites; a guidance document, currently in preparation, will describe aquifer restoration concerns and technical protocols. This document is a second revision to the original document issued in May 1986; the revision has been made in response to changes to the groundwater standards of 40 CFR 192, Subparts A--C, proposed by EPA as draft standards. New sections were added to define the design approaches and designs necessary to comply with the groundwater standards. These new sections are in addition to changes made throughout the document to reflect current procedures, especially in cover design, water resources protection, and alternate site selection; only minor revisions were made to some of the sections. Sections 3.0 is a new section defining the approach taken in the design of disposal cells; Section 4.0 has been revised to include design of vegetated covers; Section 8.0 discusses design approaches necessary for compliance with the groundwater standards; and Section 9.0 is a new section dealing with nonradiological hazardous constituents. 203 refs., 18 figs., 26 tabs.

  2. 1994 DOE Technical Standards Program Workshop: Proceedings

    SciTech Connect (OSTI)

    Spellman, D.J.

    1994-12-31T23:59:59.000Z

    The DOE Technical Standards Program has been structured to provide guidance and assistance for the development, adoption, and use of voluntary standards within the Department. OMB Circular A-119, ``Federal Participation in the Development and Use of Voluntary Standards`` establishes the policy to be followed in working with voluntary standards bodies, and in adopting and using voluntary standards whenever feasible. The DOE Technical Standards Program is consistent with this policy and is dedicated to the task of promoting its implementation. The theme of this year`s workshop is ``Standards Initiatives in Environmental Management fostering the development and use of industry standards for safe, environmentally responsible operations.`` The objective of the workshop is to increase the participant`s awareness of the standardization activities taking place nationally and internationally and the impact of these activities on their efforts, and to facilitate the exchange of experiences, processes, and tools for implementing the program. Workshop sessions will include presentations by industry and Government notables in the environment, safety, and health arena with ample opportunity for everyone to ask questions and share experiences. There will be a breakout session which will concentrate on resolution of issues arising from the implementation of the DOE Technical Standards Program and a plenary session to discuss the plans developed by the breakout groups. Many organizations provide services and products which support the development, processing, distribution, and retrieval of standards. Those organizations listed at the end of the agenda will have exhibits available for your perusal throughout the workshop. Last year`s workshop was very successful in stimulating an understanding of an interest in the standards program. This year, we hope to build on that success and provide an environment for the synergism of ideas to enhance the program and advance its implementation.

  3. Grafted methylenediphosphonate ion exchange resins

    DOE Patents [OSTI]

    Trochimcznk, A.W.; Gatrone, R.C.; Alexandratos, S.; Horwitz, E.P.

    1997-04-08T23:59:59.000Z

    An ion exchange resin is disclosed that is comprised of an insoluble copolymer onto which are grafted pendent groups that provide 1.0 to about 10 mmol/g dry weight phosphorus. The pendent groups have the formula as shown in the patent wherein R is hydrogen, a cation or mixtures thereof; and R{sup 1} is hydrogen or an C{sub 1}-C{sub 2} alkyl group. The resin also contains zero to about 5 mmol/g dry weight of pendent aromatic sulfonate groups. Processes for making and using an ion exchange resin are also disclosed.

  4. Information Exchange for theInformation Exchange for the Development of SustainableDevelopment of Sustainable

    E-Print Network [OSTI]

    Information Exchange for theInformation Exchange for the Development of SustainableDevelopment influenced the development ofthe development of sustainable wood process industrysustainable wood process industry substantiallysubstantially .. Information Exchange for the development of Sustainable Wood Process

  5. Technical cooperation on nuclear security between the United States and China : review of the past and opportunities for the future.

    SciTech Connect (OSTI)

    Pregenzer, Arian Leigh

    2011-12-01T23:59:59.000Z

    The United States and China are committed to cooperation to address the challenges of the next century. Technical cooperation, building on a long tradition of technical exchange between the two countries, can play an important role. This paper focuses on technical cooperation between the United States and China in the areas of nonproliferation, arms control and other nuclear security topics. It reviews cooperation during the 1990s on nonproliferation and arms control under the U.S.-China Arms Control Exchange, discusses examples of ongoing activities under the Peaceful Uses of Technology Agreement to enhance security of nuclear and radiological material, and suggests opportunities for expanding technical cooperation between the defense nuclear laboratories of both countries to address a broader range of nuclear security topics.

  6. Primer on nuclear exchange models

    SciTech Connect (OSTI)

    Hafemeister, David [Physics Department, Cal Poly University, San Luis Obispo, California (United States)

    2014-05-09T23:59:59.000Z

    Basic physics is applied to nuclear force exchange models between two nations. Ultimately, this scenario approach can be used to try and answer the age old question of 'how much is enough?' This work is based on Chapter 2 of Physics of Societal Issues: Calculations on National Security, Environment and Energy (Springer, 2007 and 2014)

  7. RADTRAN 6 technical manual.

    SciTech Connect (OSTI)

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O'Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01T23:59:59.000Z

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  8. Boiler MACT Technical Assistance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The FutureCommentsEnergyandapproximately 10|BlueFireBoiler MACT Technical

  9. Final Technical Report

    SciTech Connect (OSTI)

    Sobecky, Patricia A; Taillefert, Martial

    2013-03-29T23:59:59.000Z

    This final technical report describes results and findings from a research project to examine the role of microbial phosphohydrolase enzymes in naturally occurring subsurface microorganisms for the purpose of promoting the immobilization of the radionuclide uranium through the production of insoluble uranium phosphate minerals. The research project investigated the microbial mechanisms and the physical and chemical processes promoting uranium biomineralization and sequestration in oxygenated subsurface soils. Uranium biomineralization under aerobic conditions can provide a secondary biobarrier strategy to immobilize radionuclides should the metal precipitates formed by microbial dissimilatory mechanisms remobilize due to a change in redox state.

  10. SPEAR3 | Technical Documentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited ReleaseWelcome ton n u a l r e p o Technical

  11. Technical Review Panel Report

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy Solar Decathlon | DepartmentEnergyOffice -TechnicalTRP

  12. External Technical Review Report

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial602 1,39732 DOEDepartment of EnergyEric J.ExploringExternal Technical

  13. ARM - Technical Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMForms About Become a UsergovAboutRecoverygovPublicationsTechnical

  14. The Office of Environmental Management technical reports: A bibliography

    SciTech Connect (OSTI)

    NONE

    1998-07-01T23:59:59.000Z

    The Office of Environmental Management`s (EM) technical reports bibliography is an annual publication that contains information on scientific and technical reports sponsored by the Office of Environmental Management added to the Energy Science and Technology Database from July 1, 1995--that were published from October 1, 1996--September 30, 1997. This information is divided into the following categories: Miscellaneous, Focus Areas and Crosscutting Programs, Support Programs, Technology Integration and International Technology Exchange, are now included in the Miscellaneous category. The Office of Environmental Management within the Department of Energy (DOE) is responsible for environmental restoration, waste management, technology development and facility transition and management. Subjects include: subsurface contaminants; mixed waste characterization, treatment and disposal; radioactive tank waste remediation; plutonium; deactivation and decommissioning; robotics; characterization, monitoring, and sensor technology; and efficient separations. 880 refs.

  15. Scientific and Technical Information Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-10-14T23:59:59.000Z

    The Order establishes requirements and responsibilities for managing DOE's scientific and technical information. Cancels DOE O 241.1. Canceled by DOE O 241.1B.

  16. Technical Services | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    noteworthy for their unique technical capabilities: Central Shops facility performs welding and brazing for high-vacuum applications, machining of radioactive materials, and a...

  17. Hydrogen Storage Technical Team Roadmap

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and technology pathways are impacted by their analyses. These technical teams include Fuel Cells, Fuel Pathway Integration, Hydrogen Delivery, Hydrogen Production, Materials,...

  18. APS Technical Systems Monitoring Page

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Photon Source Technical Systems Accelerator Systems Storage Ring Status for the past 24 hours with real Time of Day User beam delineated. Current, Lifetime, History with 24-hr...

  19. Finance Peer Exchange Kickoff Call | Department of Energy

    Energy Savers [EERE]

    Finance Peer Exchange Kickoff Call Finance Peer Exchange Kickoff Call BetterBuildings Financing Peer Exchange Kickoff Call, Call Slides and Discussion Summary, April 28, 2011. Call...

  20. Better Buildings Workforce Peer Exchange Quality Assurance Strategies...

    Energy Savers [EERE]

    Better Buildings Workforce Peer Exchange Quality Assurance Strategies Better Buildings Workforce Peer Exchange Quality Assurance Strategies Better Buildings Workforce Peer Exchange...

  1. Phosphonic acid based ion exchange resins

    DOE Patents [OSTI]

    Horwitz, E.P.; Alexandratos, S.D.; Gatrone, R.C.; Chiarizia, R.

    1994-01-25T23:59:59.000Z

    An ion exchange resin is described for extracting metal ions from a liquid waste stream. An ion exchange resin is prepared by copolymerizing a vinylidene diphosphonic acid with styrene, acrylonitrile and divinylbenzene. 9 figures.

  2. Synergistic diffuser/heat-exchanger design

    E-Print Network [OSTI]

    Lazzara, David S. (David Sergio), 1980-

    2004-01-01T23:59:59.000Z

    The theoretical and numerical evaluation of synergistic diffusing heat-exchanger design is presented. Motivation for this development is based on current diffuser and heat-exchange technologies in cogeneration plants, which ...

  3. Phosphonic acid based ion exchange resins

    DOE Patents [OSTI]

    Horwitz, E.P.; Alexandratos, S.D.; Gatrone, R.C.; Chiarizia, R.

    1996-07-23T23:59:59.000Z

    An ion exchange resin is described for extracting metal ions from a liquid waste stream. An ion exchange resin is prepared by copolymerizing a vinylidene diphosphonic acid with styrene, acrylonitrile and divinylbenzene. 10 figs.

  4. Heat Exchanger Fouling- Prediction, Measurement and Mitigation 

    E-Print Network [OSTI]

    Peterson, G. R.

    1989-01-01T23:59:59.000Z

    The U. S. Department of Energy (DOE), Office of Industrial Programs (OIP) sponsors the development of innovative heat exchange systems. Fouling is a major and persistent cost associated with most industrial heat exchangers and nationally wastes...

  5. Energy Materials Coordinating Committee, fiscal year 1997. Annual technical report

    SciTech Connect (OSTI)

    NONE

    1998-07-31T23:59:59.000Z

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department`s materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. This report summarizes EMaCC activities for FY 1997 and describes the materials research programs of various offices and divisions within the Department.

  6. Final Technical Report

    SciTech Connect (OSTI)

    Newmarker, Marc; Campbell, Mark

    2012-03-16T23:59:59.000Z

    Design, validate at prototype level, and then demonstrate a full size, 800 MWht Thermal Energy Storage (TES) system based on Phase Changing Material (PCM) TES modules with round trip efficiency in excess of 93%. The PCM TES module would be the building block of a TES system which can be deployed at costs inline with the DOE benchmark of 2020. The development of a reliable, unsophisticated, modular, and scalable TES system designed to be massmanufactured utilizing advanced automated fabrication and assembly processes and field installed in the most cost-effective configuration could facilitate the attainment of a Levelized Cost of Energy (LCOE) of $.07/kWh by 2015. It was believed that the DOE targets can be attained by finding the best combinationTES module size, its optimal integration in the power cycle, and readily available PCM. Work under this project ultimately focused on the development and performance evaluation of a 100kWht prototype heat exchanger. The design utilizes a commercially available heat exchanger product to create a unique latent heat PCM storage module. The novel ideal associated with this technology is the inclusion of an agitation mechanism that is activated during the discharge process to improve heat transfer. The prototype unit did not meet the performance goals estimated through modeling, nor did the estimated costs of the system fall in line with the goals established by DOE.

  7. Ion exchange as a tertiary treatment

    E-Print Network [OSTI]

    Westervelt, Ronald David

    1968-01-01T23:59:59.000Z

    , produced the first synthetic ion exchange resins by reacting phenol with formaldehyde (2). These resins were insoluble and infusible. They found that the cation exchange properties could be greatly in- creased by substituting phenolsulfonic acid... by hydrogen ions. They could also b&. operated on the sodium cycle to exchange sodium iona for cations in solution. Adams and Holmes also produced the first anion exchange resins by reacting amines such as m-phenylene- diamine with formaldehyde...

  8. MILITARY TECHNICAL ACADEMY Vol. XXII, No. 4

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    #12;MILITARY TECHNICAL ACADEMY Vol. XXII, No. 4 © Military Technical Academy Publishing House Technical Academy of Bucharest, Romania Col. Prof. Eng. IOAN NICOLAESCU, Ph.D. The Military Technical Academy of Bucharest, Romania Prof. Eng. VICTOR-VALERIU PATRICIU, Ph.D. The Military Technical Academy

  9. International Technology Exchange Division: 1993 Annual report

    SciTech Connect (OSTI)

    Not Available

    1993-12-31T23:59:59.000Z

    The Office of Technology Development (OTD) was established to ensure that reliable and acceptable technologies are available for implementation at DOE sites and that a technically trained work force is available to complete the EM mission by 2019. OTD established the International Technology Exchange Staff (ITES) to identify, evaluate, and acquire international technologies which can accelerate US DOE cleanup operations. ITES`s goal is to pursue international collaboration among government organizations, educational institutions, and private industry to identify world-wide needs and available technologies that will meet US environmental needs in general, and EM cleanup needs in particular; and establish mechanisms by which US government ER/WM technologies will be transferred to the US private sector for commercialization and export to international markets. ITES has developed the following strategic objectives to implement its international goals: develop and implement EM`s policy for international programs in accordance with DOE and US Government policies and regulations; establish efficient and predictable international technology transfer mechanisms; assist the US private sector in the commercialization and deployment of federally funded EM technologies and related knowledge in international markets; leverage US and non-US resources to accelerate international development and regulatory acceptance of EM technologies; contribute to the improvement of EM`s training of US students, scientists, and managers on international environmental issues. A summary and descriptions of program activities and accomplishments are given for 17 programs which comprise the four main areas of the ITES program: Activities with the Former Soviet Union, International Technology Transfer, International Cooperation, and Information Systems and Publications. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  10. Joint Technical Operations Team | National Nuclear Security Administra...

    National Nuclear Security Administration (NNSA)

    Render Safe Joint Technical Operations Team Joint Technical Operations Team JTOT Logo NNSA's Joint Technical Operations Team (JTOT) provides specialized technical...

  11. Science Policy Exchange September 21, 2009 Columbia River Estuary Science-Policy Exchange

    E-Print Network [OSTI]

    Science Policy Exchange September 21, 2009 Summary 1 Columbia River Estuary Science-Policy Exchange and Conservation Council hosted a science-policy exchange in Astoria, Oregon. The Council supports strategies Science Advisory Board (ISAB) and the Independent Scientific Review Panel (ISRP) attended the exchange

  12. On Multiple Gluon Exchange Webs

    E-Print Network [OSTI]

    Mark Harley

    2015-05-21T23:59:59.000Z

    I present an overview of the study of infrared singularities through the eikonal approximation and the concept of webs. Our work reveals the interesting structure of an infinite subclass of webs, Multiple Gluon Exchange Webs. We find that they can be expressed as sums of products of functions depending upon only a single cusp angle, spanned by a simple basis of functions, and conjecture that this structure will hold to all orders.

  13. Texas Phosphorus Index TECHNICAL NOTES

    E-Print Network [OSTI]

    Mukhtar, Saqib

    for West Texas, see Figure 1. NRCS and Extension Service specialists in Texas developed the P indicesTexas Phosphorus Index TECHNICAL NOTES U.S. DEPARTMENT OF AGRICULTURE NATURAL RESOURCES CONSERVATION SERVICE TEXAS Revised December, 2012 AGRONOMY TECHNICAL NOTE NUMBER ­ 15 PHOSPHORUS ASSESSMENT

  14. Computer Science Department Technical Report

    E-Print Network [OSTI]

    Shahriar, Selim

    of computing #12;Virtuoso: A System for Virtual Machine Marketplaces Technical Report NWU-CS-04-39 Alex that presents the abstraction of a new raw physical machine on the buyer's network. This report describesComputer Science Department Technical Report NWU-CS-04-39 July 20, 2004 Virtuoso: A System

  15. Technical planning activity: Final report

    SciTech Connect (OSTI)

    Not Available

    1987-01-01T23:59:59.000Z

    In April 1985, the US Department of Energy's (DOE's) Office of Fusion Energy commissioned the Technical Planning Activity (TPA). The purpose of this activity was to develop a technical planning methodology and prepare technical plans in support of the strategic and policy framework of the Magnetic Fusion Program Plan issued by DOE in February 1985. Although this report represents the views of only the US magnetic fusion community, it is international in scope in the sense that the technical plans contained herein describe the full scope of the tasks that are prerequisites for the commercialization of fusion energy. The TPA has developed a well-structured methodology that includes detailed definitions of technical issues, definitions of program areas and elements, statements of research and development objectives, identification of key decision points and milestones, and descriptions of facility requirements.

  16. Technical applications of aerogels

    SciTech Connect (OSTI)

    Hrubesh, L.W.

    1997-08-18T23:59:59.000Z

    Aerogel materials posses such a wide variety of exceptional properties that a striking number of applications have developed for them. Many of the commercial applications of aerogels such as catalysts, thermal insulation, windows, and particle detectors are still under development and new application as have been publicized since the ISA4 Conference in 1994: e.g.; supercapacitors, insulation for heat storage in automobiles, electrodes for capacitive deionization, etc. More applications are evolving as the scientific and engineering community becomes familiar with the unusual and exceptional physical properties of aerogels, there are also scientific and technical application, as well. This paper discusses a variety of applications under development at Lawrence Livermore National Laboratory for which several types of aerogels are formed in custom sizes and shapes. Particular discussions will focus on the uses of aerogels for physics experiments which rely on the exceptional, sometimes unique, properties of aerogels.

  17. FINAL/ SCIENTIFIC TECHNICAL REPORT

    SciTech Connect (OSTI)

    McDonald, Henry; Singh, Suminderpal

    2006-08-28T23:59:59.000Z

    The overall objective of the Chattanooga fuel cell demonstrations project was to develop and demonstrate a prototype 5-kW grid-parallel, solid oxide fuel cell (SOFC) system that co-produces hydrogen, based on Ion America’s technology. The commercial viability of the 5kW SOFC system was tested by transporting, installing and commissioning the SOFC system at the Alternative Energy Laboratory at the University of Tennessee – Chattanooga. The system also demonstrated the efficiency and the reliability of the system running on natural gas. This project successfully contributed to the achievement of DOE technology validation milestones from the Technology Validation section of the Hydrogen, Fuel Cells and Infrastructure Technologies Program Multi-Year Research, Development and Demonstration Plan. Results of the project can be found in the final technical report.

  18. LLNL 1981: technical horizons

    SciTech Connect (OSTI)

    Not Available

    1981-07-01T23:59:59.000Z

    Research programs at LLNL for 1981 are described in broad terms. In his annual State of the Laboratory address, Director Roger Batzel projected a $481 million operating budget for fiscal year 1982, up nearly 13% from last year. In projects for the Department of Energy and the Department of Defense, the Laboratory applies its technical facilities and capabilities to nuclear weapons design and development and other areas of defense research that include inertial confinement fusion, nonnuclear ordnances, and particle-beam technology. LLNL is also applying its unique experience and capabilities to a variety of projects that will help the nation meet its energy needs in an environmentally acceptable manner. A sampling of recent achievements by LLNL support organizations indicates their diversity. (GHT)

  19. PRTR ion exchange vault column sampling

    SciTech Connect (OSTI)

    Cornwell, B.C.

    1995-03-14T23:59:59.000Z

    This report documents ion exchange column sampling and Non Destructive Assay (NDA) results from activities in 1994, for the Plutonium Recycle Test Reactor (PRTR) ion exchange vault. The objective was to obtain sufficient information to prepare disposal documentation for the ion exchange columns found in the PRTR Ion exchange vault. This activity also allowed for the monitoring of the liquid level in the lower vault. The sampling activity contained five separate activities: (1) Sampling an ion exchange column and analyzing the ion exchange media for purpose of waste disposal; (2) Gamma and neutron NDA testing on ion exchange columns located in the upper vault; (3) Lower vault liquid level measurement; (4) Radiological survey of the upper vault; and (5) Secure the vault pending waste disposal.

  20. An overview of heat exchanger enhancement techniques for industrial applications

    SciTech Connect (OSTI)

    Somasundaram, S. (Pacific Northwest Lab., Richland, WA (United States)); Ohadi, M.M. (Maryland Univ., Baltimore, MD (United States)); Richlen, S. (US Dept. of Energy, Washington, DC (US))

    1992-06-01T23:59:59.000Z

    An assessment is make of selected currently available heat exchanger enhancement techniques for single- and two-phase heat transfer mechanisms to determine their practicality and commercialization potential for different industrial applications. The assessment includes a screening review of the major techniques being investigated in the research community, and identification of selected passive techniques and determine their potential limitations with respect to industrial applications. A more detailed study of the research needs and the technology gaps is being conducted to address the issues of concern for each practical application of the chosen techniques. The technical and economic feasibility and the performance benefits of incorporating a particular technique in a heat transfer process is also discussed. The potential design, operational, and manufacturing cost issues that have prevented a technique from being widely commercialized are identified.

  1. OXYGEN 18 EXCHANGE REACTIONS OF ALDEHYDES AND KETONES

    E-Print Network [OSTI]

    Byrn, Marianne; Calvin, Melvin

    1965-01-01T23:59:59.000Z

    OXYGEN 18 EXCHANGE REACTIONS OF ALDEHYDES AND KETONES TWO-eng-48 OXYGEN 18 EXCHANGE REACTIONS OF ALDEHYDES AND KETONES

  2. Boiler Maximum Achievable Control Technology (MACT) Technical...

    Energy Savers [EERE]

    Boiler Maximum Achievable Control Technology (MACT) Technical Assistance - Fact Sheet, April 2015 Boiler Maximum Achievable Control Technology (MACT) Technical Assistance - Fact...

  3. Building America Residential Energy Efficiency Technical Update...

    Energy Savers [EERE]

    Residential Energy Efficiency Technical Update Meeting: August 2011 Building America Residential Energy Efficiency Technical Update Meeting: August 2011 On this page, you may link...

  4. Low Emission Development Strategies (LEDS): Technical, Institutional...

    Open Energy Info (EERE)

    Strategies (LEDS): Technical, Institutional and Policy Lessons Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Low Emission Development Strategies (LEDS): Technical,...

  5. Independent Oversight Review, Babcock & Wilcox Technical Services...

    Office of Environmental Management (EM)

    Independent Oversight Review, Babcock & Wilcox Technical Services Y-12, LLC - July 2012 Independent Oversight Review, Babcock & Wilcox Technical Services Y-12, LLC - July 2012 July...

  6. Federal Energy Management Program (FEMP) Technical Assistance...

    Energy Savers [EERE]

    Federal Energy Management Program (FEMP) Technical Assistance Request Portal User Guide Federal Energy Management Program (FEMP) Technical Assistance Request Portal User Guide...

  7. Vice President, Engineering and Technical Services

    Broader source: Energy.gov [DOE]

    The Engineering and Technical Services organization is responsible for implementing the transmission capital program, providing technical support for the transmission maintenance program and...

  8. A Technical Databook for Geothermal Energy Utilization

    E-Print Network [OSTI]

    Phillips, S.L.

    1981-01-01T23:59:59.000Z

    A TECHNICAL DATABOOK FOR GEOTHERMAL ENERGY UTILIZATION S.L.Technical Databook for Geothermal Energy Utilization* s. L.Survey, Menlo Park, CA. Geothermal Energy Development, CA.

  9. Space Conditioning Standing Technical Commitee Presentation ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commitee Presentation Space Conditioning Standing Technical Commitee Presentation This presentation outlines the goals of the Space Conditioning Standing Technical ommittee, as...

  10. Technical Consultant Report Template | Department of Energy

    Energy Savers [EERE]

    C3d Technical Consultant Report Template.pdf More Documents & Publications External Independent Review (EIR) Report Template Technical Consultant Contract Evaluation Consultant RFP...

  11. Previous Technical Assistance | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Technical assistance provided to WGAWIEB by the Electricity Market Studies Group of LBNL and The Regulatory Assistance Project (RAP); and More limited technical assistance...

  12. Energy Department Technical Assistance Bolsters Tribal Clean...

    Energy Savers [EERE]

    Technical Assistance Bolsters Tribal Clean Energy Deployment Energy Department Technical Assistance Bolsters Tribal Clean Energy Deployment December 2, 2011 - 3:39pm Addthis The...

  13. Ocean Thermal Extractable Energy Visualization: Final Technical...

    Office of Environmental Management (EM)

    Ocean Thermal Extractable Energy Visualization: Final Technical Report Ocean Thermal Extractable Energy Visualization: Final Technical Report Report about the Ocean Thermal...

  14. Advanced proton-exchange materials for energy efficient fuel cells.

    SciTech Connect (OSTI)

    Fujimoto, Cy H.; Grest, Gary Stephen; Hickner, Michael A.; Cornelius, Christopher James; Staiger, Chad Lynn; Hibbs, Michael R.

    2005-12-01T23:59:59.000Z

    The ''Advanced Proton-Exchange Materials for Energy Efficient Fuel Cells'' Laboratory Directed Research and Development (LDRD) project began in October 2002 and ended in September 2005. This LDRD was funded by the Energy Efficiency and Renewable Energy strategic business unit. The purpose of this LDRD was to initiate the fundamental research necessary for the development of a novel proton-exchange membranes (PEM) to overcome the material and performance limitations of the ''state of the art'' Nafion that is used in both hydrogen and methanol fuel cells. An atomistic modeling effort was added to this LDRD in order to establish a frame work between predicted morphology and observed PEM morphology in order to relate it to fuel cell performance. Significant progress was made in the area of PEM material design, development, and demonstration during this LDRD. A fundamental understanding involving the role of the structure of the PEM material as a function of sulfonic acid content, polymer topology, chemical composition, molecular weight, and electrode electrolyte ink development was demonstrated during this LDRD. PEM materials based upon random and block polyimides, polybenzimidazoles, and polyphenylenes were created and evaluated for improvements in proton conductivity, reduced swelling, reduced O{sub 2} and H{sub 2} permeability, and increased thermal stability. Results from this work reveal that the family of polyphenylenes potentially solves several technical challenges associated with obtaining a high temperature PEM membrane. Fuel cell relevant properties such as high proton conductivity (>120 mS/cm), good thermal stability, and mechanical robustness were demonstrated during this LDRD. This report summarizes the technical accomplishments and results of this LDRD.

  15. Testing and analysis of immersed heat exchangers

    SciTech Connect (OSTI)

    Farrington, R.B.; Bingham, C.E.

    1986-08-01T23:59:59.000Z

    The objectives were to determine the performance of four immersed, ''supply-side'' heat exchangers used in solar domestic-hot-water systems; to examine the effects of flow rate, temperature difference, and coil configuration on performance; and to develop a simple model to predict the performance of immersed heat exchangers. We tested four immersed heat exchangers: a smooth coil, a finned spiral, a single-wall bayonet, and a double-wall bayonet. We developed two analyticl models and a simple finite difference model. We experimentally verified that the performance of these heat exchangers depends on the flow rate through them; we also showed that the temperature difference between the heat exchanger's inlet and the storage tank can strongly affect a heat exchanger's performance. We also compared the effects of the heat exchanger's configuration and correlated Nusselt and Rayleigh numbers for each heat exchanger tested. The smooth coil had a higher effectiveness than the others, while the double-wall bayonet had a very low effectiveness. We still do not know the long-term effectiveness of heat exchangers regarding scale accumulation, nor do we know the effects of very low flow rates on a heat exchanger's performance.

  16. Ion exchange purification of scandium

    DOE Patents [OSTI]

    Herchenroeder, L.A.; Burkholder, H.R.

    1990-10-23T23:59:59.000Z

    An improvement in purification of scandium through ion exchange chromatography is disclosed in which the oxidation potential of the eluting solution is altered by the addition of potassium chlorate or ammonium chloride so that removal of contaminants is encouraged. The temperature, pH and concentration of the eluent HEDTA are controlled in order to maintain the scandium in the column while minimizing dilution of the scandium band. Recovery of scandium is improved by pumping dilute scandium over the column prior to stripping the scandium and precipitation. This eliminates the HEDTA ion and other monovalent cations contaminating the scandium band. This method maximizes recovery of scandium while maintaining purity. 2 figs.

  17. Sandia Energy - Heat Exchanger Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Scienceand RequirementsCoatingsUltra-High-Voltage SiliconEnergyFailureGlobalHeat Exchanger

  18. Technical Journal The Bendix Technical Journal publishes noteworthy results of

    E-Print Network [OSTI]

    Rathbun, Julie A.

    ADVISORY BOARD E. C. Johnson, Chairman R. E. Esch W. E. Kock L. J. Larsen TECHNICAL CONSULTANTS ALSEP: The Scientific Voice of the Moon L. R. Lewis Some Aspects of ALSEP Structural/Thermal Design J. L

  19. The Independent Technical Analysis Process

    SciTech Connect (OSTI)

    Duberstein, Corey A.; Ham, Kenneth D.; Dauble, Dennis D.; Johnson, Gary E.

    2007-04-13T23:59:59.000Z

    The Bonneville Power Administration (BPA) contracted with the Pacific Northwest National Laboratory (PNNL) to provide technical analytical support for system-wide fish passage information (BPA Project No. 2006-010-00). The goal of this project was to produce rigorous technical analysis products using independent analysts and anonymous peer reviewers. In the past, regional parties have interacted with a single entity, the Fish Passage Center to access the data, analyses, and coordination related to fish passage. This project provided an independent technical source for non-routine fish passage analyses while allowing routine support functions to be performed by other well-qualified entities.

  20. INTERNATIONAL ENVIRONMENTAL TECHNOLOGY IDENTIFICATION, DEVELOPMENT, DEMONSTRATION, DEPLOYMENT AND EXCHANGE

    SciTech Connect (OSTI)

    Roy C. Herndon

    2001-02-28T23:59:59.000Z

    Cooperative Agreement (DE-FC21-95EW55101) between the U.S. Department of Energy (DOE) and the Florida State University's Institute for International Cooperative Environmental Research (IICER) was designed to facilitate a number of joint programmatic goals of both the DOE and the IICER related to international technology identification, development, demonstration and deployment using a variety of mechanisms to accomplish these goals. These mechanisms included: laboratory and field research; technology demonstrations; international training and technical exchanges; data collection, synthesis and evaluation; the conduct of conferences, symposia and high-level meetings; and other appropriate and effective approaches. The DOE utilized the expertise and facilities of the IICER at Florida State University to accomplish its goals related to this cooperative agreement. The IICER has unique and demonstrated capabilities that have been utilized to conduct the tasks for this cooperative agreement. The IICER conducted activities related to technology identification, development, evaluation, demonstration and deployment through its joint centers which link the capabilities at Florida State University with collaborating academic and leading research institutions in the major countries of Central and Eastern Europe (e.g., Czech Republic, Hungary, Poland) and Russia. The activities and accomplishments for this five-year cooperative agreement are summarized in this Final Technical Report.

  1. Vitrification of cesium-contaminated organic ion exchange resin

    SciTech Connect (OSTI)

    Sargent, T.N. Jr. [Clemson Univ., SC (United States)

    1994-08-01T23:59:59.000Z

    Vitrification has been declared by the Environmental Protection Agency (USEPA) as the Best Demonstrated Available Technology (BDAT) for the permanent disposal of high-level radioactive waste. Savannah River Site currently uses a sodium tetraphenylborate (NaTPB) precipitation process to remove Cs-137 from a wastewater solution created from the processing of nuclear fuel. This process has several disadvantages such as the formation of a benzene waste stream. It has been proposed to replace the precipitation process with an ion exchange process using a new resorcinol-formaldehyde resin developed by Savannah River Technical Center (SRTC). Preliminary tests, however, showed that problems such as crust formation and a reduced final glass wasteform exist when the resin is placed in the melter environment. The newly developed stirred melter could be capable of overcoming these problems. This research explored the operational feasibility of using the stirred tank melter to vitrify an organic ion exchange resin. Preliminary tests included crucible studies to determine the reducing potential of the resin and the extent of oxygen consuming reactions and oxygen transfer tests to approximate the extent of oxygen transfer into the molten glass using an impeller and a combination of the impeller and an external oxygen transfer system. These preliminary studies were used as a basis for the final test which was using the stirred tank melter to vitrify nonradioactive cesium loaded organic ion exchange resin. Results from this test included a cesium mass balance, a characterization of the semi-volatile organic compounds present in the off gas as products of incomplete combustion (PIC), a qualitative analysis of other volatile metals, and observations relating to the effect the resin had on the final redox state of the glass.

  2. GEM Technical Design Report

    SciTech Connect (OSTI)

    Not Available

    1993-07-31T23:59:59.000Z

    The GEM collaboration was formed in June 1991 to develop a major detector for the SSC. The primary physics objectives of GEM are those central to the motivation for the SSC, to study high p{sub T} physics - exemplified by the search for Higgs bosons - and to search for new physics beyond the standard model. The authors present in this Technical Design Report (TDR) a detector with broad capabilities for the discovery and subsequent study of electroweak symmetry breaking, the origin of mass and flavor, and other physics requiring precise measurements of gammas, electrons, and muons - hence the name, GEM. In addition, as a design goal, they have taken care to provide the robustness needed to do the physics that requires high luminosity. Finally, good coverage and hermeticity allow the detection of missing transverse energy, E{sub T}. The GEM design emphasizes clean identification and high resolution measurement of the primary physics signatures for high p{sub T} physics. The approach is to make precise energy measurements that maximize the sensitivity to rare narrow resonances, to detect the elementary interaction products (quarks, leptons, and photons), and to build in the features required to reduce backgrounds.

  3. Final Technical Report

    SciTech Connect (OSTI)

    Stoessel, Chris

    2013-11-13T23:59:59.000Z

    This project developed a new high-performance R-10/high SHGC window design, reviewed market positioning and evaluated manufacturing solutions required for broad market adoption. The project objectives were accomplished by: identifying viable technical solutions based on modeling of modern and potential coating stacks and IGU designs; development of new coating material sets for HM thin film stacks, as well as improved HM IGU designs to accept multiple layers of HM films; matching promising new coating designs with new HM IGU designs to demonstrate performance gains; and, in cooperation with a window manufacturer, assess the potential for high-volume manufacturing and cost efficiency of a HM-based R-10 window with improved solar heat gain characteristics. A broad view of available materials and design options was applied to achieve the desired improvements. Gated engineering methodologies were employed to guide the development process from concept generation to a window demonstration. The project determined that a slightly de-rated window performance allows formulation of a path to achieve the desired cost reductions to support end consumer adoption.

  4. FINAL TECHNICAL REPORT

    SciTech Connect (OSTI)

    STEFAN VASILE; ZHENG LI

    2010-06-17T23:59:59.000Z

    High-resolution tracking detectors based on Active Pixel Sensor (APS) have been valuable tools in Nuclear Physics and High-Energy Physics research, and have contributed to major discoveries. Their integration time, radiation length and readout rate is a limiting factor for the planed luminosity upgrades in nuclear and high-energy physics collider-based experiments. The goal of this program was to demonstrate and develop high-gain, high-resolution tracking detector arrays with faster readout, and shorter radiation length than APS arrays. These arrays may operate as direct charged particle detectors or as readouts of high resolution scintillating fiber arrays. During this program, we developed in CMOS large, high-resolution pixel sensor arrays with integrated readout, and reset at pixel level. Their intrinsic gain, high immunity to surface and moisture damage, will allow operating these detectors with minimal packaging/passivation requirements and will result in radiation length superior to APS. In Phase I, we designed and fabricated arrays with calorimetric output capable of sub-pixel resolution and sub-microsecond readout rate. The technical effort was dedicated to detector and readout structure development, performance verification, as well as to radiation damage and damage annealing.

  5. Final Scientific/Technical Report

    SciTech Connect (OSTI)

    Brown, R. C.; McCarley, T. M.

    2006-05-04T23:59:59.000Z

    The overall goal of this project was to establish an education and training program in biobased products at Iowa State University (ISU). In particular, a graduate program in Biorenewable Resources and Technology (BRT) was to be established as a way of offering students advanced study in the use of plant- and crop-based resources in the production of biobased products. The program was to include three fundamental elements: an academic program, a research program, and industrial interactions. The academic program set out to introduce a new graduate major in Biorenewable Resources and Technology. Unlike other schools, which only offer certificates or areas of emphasis in biobased products, Iowa State University offers both M.S. and Ph.D degrees through its graduate program. Core required courses in Biorenewable Resources and Technology include a foundation course entitled Fundamentals of Biorenewable Resources (BRT 501); a seminar course entitled Biobased Products Seminar (BRT 506); a laboratory course, and a special topics laboratory course. The foundation course is a three-credit course introducing students to basic concepts in biorenewable resources and technology. The seminar course provides students with an opportunity to hear from nationally and internationally recognized leaders in the field. The laboratory requirement is a 1-credit laboratory course or a special topics laboratory/research experience (BRT 591L). As part of student recruitment, quarter-time assistantships from DOE funds were offered to supplement assistantships provided by faculty to students. Research was built around platform teams in an effort to encourage interdisciplinary research and collaborative student learning in biorenewable resources. A platform is defined as the convergence of enabling technologies into a highly integrated system for transforming a specific feedstock into desired products. The platform teams parallel the way industry conducts research and product development. Platform teams organize faculty and students for cross-disciplinary, systems-oriented research and collaborative learning. To date, nine platforms have been developed, although these will most likely be reorganized into a smaller number of broader topics. In the spring of 2004, BRT faculty initiated a regional partnership and collaborative learning program with colleagues at the University of Minnesota, Kansas State University, and South Dakota State University to develop distance education courses in biorenewable resources and technology. As a fledgling graduate program, the BRT graduate program didn’t have the breadth of resources to offer a large number of courses in biorenewables. Other schools faced a similar problem. The academic consortium as first conceived would allow students from the member schools to enroll in biorenewables courses from any of the participating schools, which would assure the necessary enrollment numbers to offer specialized course work. Since its inception, the collaborative curriculum partnership has expanded to include Louisiana State University and the University of Wisconsin. A second international curriculum development campaign was also initiated in the spring of 2004. In particular, several BRT faculty teamed with colleagues at the University of Arkansas, University of Washington, University of Gent (Belgium), National Polytechnic Institute of Toulouse (France), and Technical University of Graz (Austria) to develop an EU-US exchange program in higher education and vocational education/training (entitled “Renewable Resources and Clean Technology”).

  6. Istanbul Technical University Istanbul, Turkey

    E-Print Network [OSTI]

    Duchowski, Andrew T.

    and ocean engineering Faculty of science and letters Faculty of management Faculty of Aeronautics Engineering Shipbuilding and Ocean Engineering Mathematics Engineering Physics Engineering Chemistry distinguished in Turkey with its engineering and architecture education. Istanbul Technical University

  7. Offshoring and Directed Technical Change

    E-Print Network [OSTI]

    Acemoglu, Daron

    2012-11-24T23:59:59.000Z

    To study the short-run and long-run implications on wage inequality, we introduce directed technical change into a Ricardian model of offshoring. A unique final good is produced by combining a skilled and an unskilled ...

  8. Technical challenges for dismantlement verification

    SciTech Connect (OSTI)

    Olinger, C.T.; Stanbro, W.D.; Johnston, R.G.; Nakhleh, C.W.; Dreicer, J.S.

    1997-11-01T23:59:59.000Z

    In preparation for future nuclear arms reduction treaties, including any potential successor treaties to START I and II, the authors have been examining possible methods for bilateral warhead dismantlement verification. Warhead dismantlement verification raises significant challenges in the political, legal, and technical arenas. This discussion will focus on the technical issues raised by warhead arms controls. Technical complications arise from several sources. These will be discussed under the headings of warhead authentication, chain-of-custody, dismantlement verification, non-nuclear component tracking, component monitoring, and irreversibility. The authors will discuss possible technical options to address these challenges as applied to a generic dismantlement and disposition process, in the process identifying limitations and vulnerabilities. They expect that these considerations will play a large role in any future arms reduction effort and, therefore, should be addressed in a timely fashion.

  9. Facility worker technical basis document

    SciTech Connect (OSTI)

    SHULTZ, M.V.

    2003-08-28T23:59:59.000Z

    This technical basis document was developed to support the Tank Farm Documented Safety Analysis (DSA). It describes the criteria and methodology for allocating controls to hazardous conditions with significant facility work consequence and presents the results of the allocation.

  10. EPA's Financial and Technical Resources

    E-Print Network [OSTI]

    Perea, S. M.

    2011-01-01T23:59:59.000Z

    EPA?s Financial and Technical Resources Suzanna M. Perea, EPA Region VI CATEE Conference November 9, 2011 EPA?s Primary Role Where and how communities are built has a major impact on the environment and on public health. Many programs... are aimed at supporting activities that build more sustainable communities. Protecting Human Health and the Environment Smart Growth Implementation Assistance (SGIA) Grants http://www.epa.gov/smartgrowth/sgia.htm Building Blocks Technical...

  11. Guam Initial Technical Assessment Report

    SciTech Connect (OSTI)

    Baring-Gould, I.; Conrad, M.; Haase, S.; Hotchkiss, E.; McNutt, P.

    2011-04-01T23:59:59.000Z

    Under an interagency agreement, funded by the Department of Interior's (DOI) Office of Insular Affairs (OIA), the National Renewable Energy Laboratory (NREL) was tasked to deliver technical assistance to the island of Guam by conducting an island initial technical assessment that would lay out energy consumption and production data and establish a baseline. This assessment will be used to conduct future analysis and studies by NREL that will estimate energy efficiency and renewable energy potential for the island of Guam.

  12. DHE (downhole heat exchangers). [Downhole Heat Exchangers (DHE)

    SciTech Connect (OSTI)

    Culver, G.

    1990-11-01T23:59:59.000Z

    The use of downhole heat exchangers (DHE) for residential or commercial space and domestic water heating and other applications has several desirable features. Systems are nearly or completely passive -- that is, no or very little geothermal water or steam is produced from the well either reducing or completely eliminating surface environmental concerns and the need for disposal systems or injection wells. Initial cost of pumps and installation are eliminated or reduced along with pumping power costs and maintenance costs associated with pumping often corrosive geothermal fluids. Many residential and small commercial systems do not require circulating pumps because the density difference in the incoming and outgoing sides of the loop are sufficient to overcome circulating friction losses in the entire system. The major disadvantage of DHEs is their dependence on natural heat flow. In areas where geological conditions provide high permeability and a natural hydraulic gradient, DHEs can provide a substantial quantity of heat. A single 500-ft (152 m) well in Klamath Falls, Oregon, supplies over one megawatt thermal and output is apparently limited by the surface area of pipe that can be installed in the well bore. In contrast, DHEs used in conjunction with heat pumps may supply less than 8 KW from a well of similar depth. Here output is limited by conductive heat flow with perhaps a small contribution from convection near the well bore. The highest capacity DHE reported to date, in Turkey, supplies 6 MW thermal from an 820-ft (250 m) well. There were two main goals for this project. The first was to gather, disseminate and exchange internationally information on DHES. The second was to perform experiments that would provide insight into well bore/aquifer interaction and thereby provide more information on which to base DHE designs. 27 refs., 31 figs., 3 tabs.

  13. Energy Materials Coordinating Committee (EMaCC). Annual technical report, Fiscal Year 2001

    SciTech Connect (OSTI)

    none,

    2002-08-01T23:59:59.000Z

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations.

  14. Exchange effects in a cold plasma

    E-Print Network [OSTI]

    Ekman, Robin; Brodin, Gert

    2015-01-01T23:59:59.000Z

    We have studied the exchange corrections to linear electrostatic wave propagation in a plasma using a quantum kinetic formalism. Specifically we have considered the zero temperature limit. In order to simplify the calculations we have focused on the long wavelength limit, i.e. wavelengths much longer than the de Broglie wavelength. For the case of ion-acoustic waves we have calculated the exchange correction both to the damping rate and the real part of the frequency. For Langmuir waves the frequency shift due to exchange effects is found. Our results are compared with the frequency shifts deduced from commonly used exchange potentials which are computed from density functional theory.

  15. THERMOSIPHON WATER HEATERS WITH HEAT EXCHANGERS

    E-Print Network [OSTI]

    Mertol, Atila

    2012-01-01T23:59:59.000Z

    The Performance of Solar Water Heater With Natural Ci rcul2-6, 1980 THERMOSIPHON WATER HEATERS WITH HEAT EXCHANGERSJune 1980 THERMOSIPHON WATER HEATERS WITH HEAT EXCHANGERS*

  16. Manufacturing serendipity: Chicago Innovation Exchange enhancing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Social Media Photos Videos Fact Sheets, Brochures and Reports Summer Science Writing Internship John Flavin, Executive Director of the Chicago Innovation Exchange, started a small...

  17. Sandia National Laboratories: information exchange on performance...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exchange on performance indicators Sandia Contributes to International Electrotechnical Commission IEC 61400-26 Availability Standard On June 12, 2014, in Analysis, Distribution...

  18. NETL's Energy Data eXchange

    SciTech Connect (OSTI)

    None

    2014-07-16T23:59:59.000Z

    A brief tour around NETL's Energy Data Exchange site, where researchers can upload data or look at data from another researcher.

  19. Sandia National Laboratories: molecularly engineered ion exchanger

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ion exchanger ECIS and UOP (a Honewell Company): CSTs Clean Radioactive Waste in Fukushima and Worldwide On February 14, 2013, in Energy, Materials Science, Nuclear Energy,...

  20. NETL's Energy Data eXchange

    ScienceCinema (OSTI)

    None

    2014-07-22T23:59:59.000Z

    A brief tour around NETL's Energy Data Exchange site, where researchers can upload data or look at data from another researcher.

  1. Efficiency Exchange Conference Highlights Energy Efficiency Innovation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Efficiency Exchange Conference Highlights Energy Efficiency Innovations and Trends Northwest electric power industry connects on the latest energy efficiency programs and...

  2. Energy Efficiency Exchange 2015 | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Energy Efficiency Exchange 2015 August 11-13, 2015, Phoenix Convention Center As the nation's largest energy consumer, the federal government has a tremendous opportunity and clear...

  3. Low-Cost Microchannel Heat Exchanger

    Energy Savers [EERE]

    process Produce prototype heat exchangers for electronics cooling and high pressure waste heat recovery power system applications Test integrity and confirm high...

  4. Efficiency Exchange highlights energy efficiency innovations...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Efficiency Exchange highlights energy efficiency innovations and trends Northwest electric power industry connects on the latest energy efficiency programs and strategies Portland,...

  5. A Lightweight Material for Heat Exchange Applications

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    exchangers have been manufactured from metal because metals are effective in conducting thermal energy. Plastics, although cheaper, lighter, and less energy intensive to make...

  6. CTBT technical issues handbook

    SciTech Connect (OSTI)

    Zucca, J.J. [ed.

    1994-05-01T23:59:59.000Z

    The purpose of this handbook is to give the nonspecialist in nuclear explosion physics and nuclear test monitoring an introduction to the topic as it pertains to a Comprehensive Test Ban Treaty (CTBT). The authors have tried to make the handbook visually oriented, with figures paired to short discussions. As such, the handbook may be read straight through or in sections. The handbook covers four main areas and ends with a glossary, which includes both scientific terms and acronyms likely to be encountered during CTBT negotiations. The following topics are covered: (1) Physics of nuclear explosion experiments. This is a description of basic nuclear physics and elementary nuclear weapon design. Also discussed are testing practices. (2) Other nuclear experiments. This section discusses experiments that produce small amounts of nuclear energy but differ from explosion experiments discussed in the first chapter. This includes the type of activities, such as laser fusion, that would continue after a CTBT is in force. (3) Monitoring tests in various environments. This section describes the different physical environments in which a test could be conducted (underground, in the atmosphere, in space, underwater, and in the laboratory); the sources of non-nuclear events (such as earthquakes and mining operations); and the opportunities for evasion. (4) On-site inspections. A CTBT is likely to include these inspections as an element of the verification provisions, in order to resolve the nature of ambiguous events. This chapter describes some technical considerations and technologies that are likely to be useful. (5) Selecting verification measures. This chapter discusses the uncertain nature of the evidence from monitoring systems and how compliance judgments could be made, taking the uncertainties into account. It also discusses how to allocate monitoring resources, given the likelihood of testing by various countries in various environments.

  7. Final Technical Report

    SciTech Connect (OSTI)

    Joel Walls, Richard Uden, Scott Singleton, Rone Shu, Gary Mavko

    2005-04-12T23:59:59.000Z

    Using current methods, oil and gas in the subsurface cannot be reliably predicted from seismic data. This causes domestic oil and gas fields to go undiscovered and unexploited, thereby increasing the need to import energy. The general objective of this study was to demonstrate a simple and effective methodology for estimating reservoir properties (gas saturation in particular, but also including lithology, net to gross ratios, and porosity) from seismic attenuation and other attributes using P and S-waves. Phase I specific technical objectives: • Develop Empirical or Theoretical Rock Physics Relations for Qp and Qs • Create P-wave and S-wave Synthetic Seismic Modeling Algorithms with Q • Compute P-wave and S-wave Q Attributes from Multi-component Seismic Data All objectives defined in the Phase I proposal were accomplished. During the course of this project, a new class of seismic analysis was developed based on compressional and shear wave inelastic rock properties (attenuation). This method provides a better link between seismic data and the presence of hydrocarbons. The technique employs both P and S-wave data to better discriminate between attenuation due to hydrocarbons versus energy loss due to other factors such as scattering and geometric spreading. It was demonstrated that P and S attenuation can be computed from well log data and used to generate synthetic seismograms. Rock physics models for P and S attenuation were tested on a well from the Gulf of Mexico. The P and S-wave Q attributes were computed on multi-component 2D seismic data intersecting this well. These methods generated reasonable results, and most importantly, the Q attributes indicated gas saturation.

  8. Final Technical Report

    SciTech Connect (OSTI)

    Juan Camilo Serrano

    2011-12-16T23:59:59.000Z

    New and novel material and process technologies applied in wind blade designs and production are critical to increasing the competitiveness of wind power generation against traditional sources of energy. In this project, through collaboration between PPG Industries and MAG Industrial Automation Systems, the potential of using automated manufacturing for the production of fiber glass composite wind blades was evaluated from both technical and economic points of view. Further, it was demonstrated that by modifying the standard blade raw material forms through the use of cost effective pre-impregnated rovings coupled with using an automated fiber placement machine to lay up the parts, it is possible to produce state of the art composite laminates with significantly improved mechanical performance and with higher processing rates than standard blade production technology allows for today, thereby lowering the cost of energy over turbine blades made using traditional processes and materials. In conformity with the scope of work of the submitted proposal, the project team completed each task and documented and reported its findings on the appropriate quarterly report submitted to the DOE project team. The activities and this report are divided into 5 subtasks: (1) Material Investigation - Reviews traditional materials and key specifications and testing methods; (2) Manufacturing and Automation - Identifies new candidate material forms and automated layup processes; (3) Process Development - Performs trials of candidate materials and processes; (4) Predictive Analysis - Assesses impact of new material forms and automated processes on a model blade design; and (5) Feasibility Assessment - Compares traditional manufacturing processes and materials to new candidate material forms and automated processes.

  9. WAGES, FLEXIBLE EXCHANGE RATES, AND MACROECONOMIC POLICY*

    E-Print Network [OSTI]

    WAGES, FLEXIBLE EXCHANGE RATES, AND MACROECONOMIC POLICY* JEFFREY SACHS In an open economy with a floaLing exchange rate, the efficacy of fiscal and monetary policy depends fundamentally on the wage rate depreciation, while fiscal expansion has no output effect. These results hold only when real wages

  10. Configure Outlook 2010 with Exchange Server

    E-Print Network [OSTI]

    Qiu, Weigang

    Configure Outlook 2010 with Exchange Server #12;1. Navigate to the Windows Start Menu (or press. #12;14. E-mail server settings will now auto configure. 15. Once the Auto Account Setup is configured server settings or additional server types. 3. Click the Next > button. #12;4. Select Microsoft Exchange

  11. Business Time in the Foreign Exchange Markets

    E-Print Network [OSTI]

    Edinburgh, University of

    Business Time in the Foreign Exchange Markets Mark J L Orr Centre for Cognitive Science Edinburgh University June 1997 #12; Business Time in the Foreign Exchange Markets Mark J L Orr y Centre for Cognitive; Contents 1 Introduction 4 2 The Price Change Scaling Law 5 3 Business Time 7 4 The BZW Data 11 5 Volatility

  12. Technical Support and Transfer of Geothrmal Technical Knowledge and Information

    SciTech Connect (OSTI)

    John W. Lund

    2007-11-14T23:59:59.000Z

    The Geo-Heat Center (GHC) staff provided responses to 1442 technical support requests during the contract period (April 1, 2006 to September 30, 2007), which were six quarters under this contract. Our website, consisting of 1900 files, also contributes to our technical assistance activity. Downloaded files were 1,889,323 (3,448 per day) from our website, the total number of users was 1,365,258 (2,491 per day), and the total number of hits were 6,008,500 (10,064 per day). The GHC staff attended 60 workshops, short course and professional meeting and made 29 technical presentations. The staff also prepared and mailed out 2,000 copies of each of five issues of the GHC Quaterly Bulletin which contained 26 articles. We also mailed out approximately 5,000 papers and publications to interested individuals and organizations.

  13. Energy Materials Coordinating Committee (EMaCC): Fiscal year 1996. Annual technical report

    SciTech Connect (OSTI)

    NONE

    1997-08-01T23:59:59.000Z

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department`s materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. The EMaCC reports to the Director of the Office of Energy Research in his or her capacity as overseer of the technical programs of the Department. This annual technical report is mandated by the EMaCC terms of reference. This report summarizes EMaCC activities for FY 1996 and describes the materials research programs of various offices and divisions within the Department.

  14. Nutrient Management TrainingNutrient Management Training for Technical Service Providersfor Technical Service Providers

    E-Print Network [OSTI]

    Nutrient ManagementNutrient Management ­­ Record KeepingRecord Keeping ­­ Feed ManagementFeed ManagementNutrient Management TrainingNutrient Management Training for Technical Service Providersfor Management Planning Technical Guidance.Management Planning Technical Guidance. Manure and Wastewater Handling

  15. FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

    SciTech Connect (OSTI)

    KRIPPS, L.J.

    2005-03-03T23:59:59.000Z

    This document describes the qualitative evaluation of frequency and consequences for DST and SST representative flammable gas accidents and associated hazardous conditions without controls. The evaluation indicated that safety-significant structures, systems and components (SSCs) and/or technical safety requirements (TSRs) were required to prevent or mitigate flammable gas accidents. Discussion on the resulting control decisions is included. This technical basis document was developed to support WP-13033, Tank Farms Documented Safety Analysis (DSA), and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence.

  16. Organic solvent technical basis document

    SciTech Connect (OSTI)

    SANDGREN, K.R.

    2003-03-22T23:59:59.000Z

    This technical basis document was developed to support the Tank Farms Documented Safety Analysis (DSA), and describes the risk binning process and the technical basis for assigning risk bins for the organic solvent fire representative and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous conditions based on an evaluation of the frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR-level controls. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses, as described in this report.

  17. Technical Exchange on Improved Design and Performance of High Level Waste Melters - Final Report

    SciTech Connect (OSTI)

    SK Sundaram; ML Elliott; D Bickford

    1999-11-19T23:59:59.000Z

    SIA Radon is responsible for management of low- and intermediate-level radioactive waste (LILW) produced in Central Russia. In cooperation with Minatom organizations Radon carries out R and D programs on treatment of simulated high level waste (HLW) as well. Radon scientists deal with a study of materials for LILW, HLW, and Nuclear Power Plants (NPP) wastes immobilization, and development and testing of processes and technologies for waste treatment and disposal. Radon is mostly experienced in LILW vitrification. This experience can be carried over to HLW vitrification especially in field of melting systems. The melter chosen as a basic unit for the vitrification plant is a cold crucible. Later on Radon experience in LILW vitrification as well as our results on simulated HLW vitrification are briefly described.

  18. Technical note Use of mixed ion exchange resin and the denitrifier method to determine isotopic

    E-Print Network [OSTI]

    Templer, Pamela

    as water passes over them (e.g., Van Dam et al.,1991; Fenn et al., 2002; Simkin et al., 2004.g., Simkin et al., 2004) and therefore resin collectors can remain in the field for a longer period of time

  19. THE PROFITABILITY OF TECHNICAL TRADING RULES IN THE FOREIGN EXCHANGE MARKET

    E-Print Network [OSTI]

    Heller, Barbara

    Angeles, CA. 90089 cialenco@usc.edu **University of Southern California, Marshall School of Business, FBE

  20. Biosketches of Speakers - P&RA CoP December 2014 Technical Exchange Meeting

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The FutureCommentsEnergyandapproximately 10| Department of Energy

  1. External Technical Review Report for Small Column Ion Exchange Technology at Savannah River Site

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic Plan| Department of Energy 088: FederalEconomicEnergyExportand Review of

  2. Technical Information Exchange on Pyrolysis Oil: Potential for a Renewab;e

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy Solar Decathlon | Department ofHeating Oil Substation Fuel

  3. December 11-12, 2014 - Technical Exchange Meeting - Las Vegas, Nevada |

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial602 1,39732 DOE F 243.2Dashboards Dashboards PublicDavid W.15Department of

  4. Technical Exchange and Cooperation Arrangement Between the Department of Energy and the European Atomic Energy Community

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic2Uranium Transferon the PassingRouting TECFinishFrequently Asked

  5. Technical Information Exchange on Pyrolysis Oil: Potential for a Renewab;e

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMayDepartment ofEnergyTeam Cumberland »Department of EnergyHeating

  6. Technical Information Exchange on Pyrolysis Oil: Potential for a renewable heating oil substitution

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMayDepartment ofEnergyTeam Cumberland »Department ofPotential for a

  7. Attendees - December 2014 P&RA Technical Exchange Meeting | Department of

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613Portsmouth SitePresentationsMarketing80.pdf18.pdf2).pdf1/08 Attendance ListEnergy

  8. Progress Report for Diffusion Welding of the NGNP Process Application Heat Exchangers

    SciTech Connect (OSTI)

    R.E. Mizia; D.E. Clark; M.V. Glazoff; T.E. Lister; T.L. Trowbridge

    2011-12-01T23:59:59.000Z

    The U.S. Department of Energy selected the high temperature gas-cooled reactor as the basis for the Next Generation Nuclear Plant (NGNP). The NGNP will demonstrate the use of nuclear power for electricity, hydrogen production, and process heat applications. The NGNP Project is currently investigating the use of metallic, diffusion welded, compact heat exchangers to transfer heat from the primary (reactor side) heat transport system to the secondary heat transport system. An intermediate heat exchanger will transfer this heat to downstream applications such as hydrogen production, process heat, and electricity generation. The channeled plates that make up the heat transfer surfaces of the intermediate heat exchanger will have to be assembled into an array by diffusion welding. This report describes the preliminary results of a scoping study that evaluated the diffusion welding process parameters and the resultant mechanical properties of diffusion welded joints using Alloy 800H. The long-term goal of the program is to progress towards demonstration of small heat exchanger unit cells fabricated with diffusion welds. Demonstration through mechanical testing of the unit cells will support American Society of Mechanical Engineers rules and standards development, reduce technical risk, and provide proof of concept for heat exchanger fabrication methods needed to deploy heat exchangers in several potential NGNP configurations.1 Researchers also evaluated the usefulness of modern thermodynamic and diffusion computational tools (Thermo-Calc and Dictra) in optimizing the parameters for diffusion welding of Alloy 800H. The modeling efforts suggested a temperature of 1150 C for 1 hour with an applied pressure of 5 MPa using 15 {micro}m nickel foil as joint filler to reduce chromium oxidation on the welded surfaces. Good agreement between modeled and experimentally determined concentration gradients was achieved

  9. FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

    SciTech Connect (OSTI)

    KRIPPS, L.J.

    2003-10-09T23:59:59.000Z

    This technical basis document was developed to support of the Tank Farms Documented Safety Analysis (DSA) and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSC and/or TSR-level controls.

  10. Technical Publications | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy Solar Decathlon | Department ofHeating1TechnicalTechnical

  11. US DRIVE Materials Technical Team Roadmap | Department of Energy

    Energy Savers [EERE]

    Materials Technical Team Roadmap US DRIVE Materials Technical Team Roadmap The Materials Technical Team (MTT) focuses primarily on reducing the mass of structural systems such as...

  12. FreedomCAR and Fuel Partnership 2008 Highlights of Technical...

    Energy Savers [EERE]

    8 Highlights of Technical Accomplishments FreedomCAR and Fuel Partnership 2008 Highlights of Technical Accomplishments Report containing brief summaries of key technical...

  13. FreedomCAR and Fuel Partnership 2007 Highlights of Technical...

    Energy Savers [EERE]

    7 Highlights of Technical Accomplishments FreedomCAR and Fuel Partnership 2007 Highlights of Technical Accomplishments Report containing brief summaries of key technical...

  14. FreedomCAR and Fuel Partnership 2009 Highlights of Technical...

    Energy Savers [EERE]

    9 Highlights of Technical Accomplishments FreedomCAR and Fuel Partnership 2009 Highlights of Technical Accomplishments This report summarizes key technical accomplishments achieved...

  15. FreedomCAR and Fuel Partnership 2010 Highlights of Technical...

    Energy Savers [EERE]

    10 Highlights of Technical Accomplishments FreedomCAR and Fuel Partnership 2010 Highlights of Technical Accomplishments This report summarizes key technical accomplishments...

  16. FreedomCAR and Fuel Partnership 2006 Highlights of Technical...

    Energy Savers [EERE]

    6 Highlights of Technical Accomplishments FreedomCAR and Fuel Partnership 2006 Highlights of Technical Accomplishments Report containing brief summaries of key technical...

  17. FreedomCAR and Fuel Partnership 2005 Highlights of Technical...

    Energy Savers [EERE]

    5 Highlights of Technical Accomplishments FreedomCAR and Fuel Partnership 2005 Highlights of Technical Accomplishments Report containing brief summaries of key technical...

  18. Table I: Technical Targets for Catalyst Coated Membranes (CCMs...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    I: Technical Targets for Catalyst Coated Membranes (CCMs): Automotive Table I: Technical Targets for Catalyst Coated Membranes (CCMs): Automotive Technical targets for fuel cell...

  19. Proton exchange membrane fuel cells for electrical power generation on-board commercial airplanes.

    SciTech Connect (OSTI)

    Curgus, Dita Brigitte; Munoz-Ramos, Karina (Sandia National Laboratories, Albuquerque, NM); Pratt, Joseph William; Akhil, Abbas Ali (Sandia National Laboratories, Albuquerque, NM); Klebanoff, Leonard E.; Schenkman, Benjamin L. (Sandia National Laboratories, Albuquerque, NM)

    2011-05-01T23:59:59.000Z

    Deployed on a commercial airplane, proton exchange membrane fuel cells may offer emissions reductions, thermal efficiency gains, and enable locating the power near the point of use. This work seeks to understand whether on-board fuel cell systems are technically feasible, and, if so, if they offer a performance advantage for the airplane as a whole. Through hardware analysis and thermodynamic and electrical simulation, we found that while adding a fuel cell system using today's technology for the PEM fuel cell and hydrogen storage is technically feasible, it will not likely give the airplane a performance benefit. However, when we re-did the analysis using DOE-target technology for the PEM fuel cell and hydrogen storage, we found that the fuel cell system would provide a performance benefit to the airplane (i.e., it can save the airplane some fuel), depending on the way it is configured.

  20. A photodiode-based neutral particle bolometer for characterizing charge-exchanged fast-ion behavior

    SciTech Connect (OSTI)

    Clary, R.; Smirnov, A.; Dettrick, S.; Knapp, K.; Korepanov, S.; Ruskov, E. [Tri Alpha Energy, Inc., Rancho Santa Margarita, California 92688 (United States); Heidbrink, W. W.; Zhu, Y. [University of California-Irvine, Irvine, California 92697 (United States)

    2012-10-15T23:59:59.000Z

    A neutral particle bolometer (NPB) has been designed and implemented on Tri Alpha Energy's C-2 device in order to spatially and temporally resolve the charge-exchange losses of fast-ion populations originating from neutral beam injection into field-reversed configuration plasmas. This instrument employs a silicon photodiode as the detection device with an integrated tungsten filter coating to reduce sensitivity to light radiation. Here we discuss the technical aspects and calibration of the NPB, and report typical NPB measurement results of wall recycling effects on fast-ion losses.

  1. Skew chicane based betatron eigenmode exchange module

    DOE Patents [OSTI]

    Douglas, David (Yorktown, VA)

    2010-12-28T23:59:59.000Z

    A skewed chicane eigenmode exchange module (SCEEM) that combines in a single beamline segment the separate functionalities of a skew quad eigenmode exchange module and a magnetic chicane. This module allows the exchange of independent betatron eigenmodes, alters electron beam orbit geometry, and provides longitudinal parameter control with dispersion management in a single beamline segment with stable betatron behavior. It thus reduces the spatial requirements for multiple beam dynamic functions, reduces required component counts and thus reduces costs, and allows the use of more compact accelerator configurations than prior art design methods.

  2. Exchange effects in magnetized quantum plasmas

    E-Print Network [OSTI]

    Trukhanova, Mariya Iv

    2015-01-01T23:59:59.000Z

    We apply the many-particle quantum hydrodynamics including the Coulomb exchange interaction to magnetized quantum plasmas. We consider a number of wave phenomenon under influence of the Coulomb exchange interaction. Since the Coulomb exchange interaction affects longitudinal and transverse-longitudinal waves we focus our attention to the Langmuir waves, Trivelpiece-Gould waves, ion-acoustic waves in non-isothermal magnetized plasmas, the dispersion of the longitudinal low-frequency ion-acoustic waves and low-frequencies electromagnetic waves at $T_{e}\\gg T_{i}$ . We obtained the numerical simulation of the dispersion properties of different types of waves.

  3. Heat Exchanger Support Bracket Design Calculations

    SciTech Connect (OSTI)

    Rucinski, Russ; /Fermilab

    1995-01-12T23:59:59.000Z

    This engineering note documents the design of the heat exchanger support brackets. The heat exchanger is roughly 40 feet long, 22 inches in diameter and weighs 6750 pounds. It will be mounted on two identical support brackets that are anchored to a concrete wall. The design calculations were done for one bracket supporting the full weight of the heat exchanger, rounded up to 6800 pounds. The design follows the American Institute of Steel Construction (AISC) Manual of steel construction, Eighth edition. All calculated stresses and loads on welds were below allowables.

  4. Better Buildings Workforce Peer Exchange Call: Kick-off | Department...

    Energy Savers [EERE]

    Documents & Publications Better Buildings Working with Utilities Peer Exchange Call: Kick-off Administering Nonprofit Energy Efficiency Programs Finance Peer Exchange Kickoff Call...

  5. Better Buildings Working with Utilities Peer Exchange Call: Kick...

    Broader source: Energy.gov (indexed) [DOE]

    April 21, 2011 Call Slides and Discussion Summary More Documents & Publications Finance Peer Exchange Kickoff Call Better Buildings Workforce Peer Exchange Call: Kick-off...

  6. Transition Path Sampling of Water Exchange Rates and Mechanisms...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Path Sampling of Water Exchange Rates and Mechanisms around Aqueous Ions . Transition Path Sampling of Water Exchange Rates and Mechanisms around Aqueous Ions . Abstract: The rates...

  7. Amine-Amine Exchange in Aminium-Methanesulfonate Aerosols. |...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Amine-Amine Exchange in Aminium-Methanesulfonate Aerosols. Amine-Amine Exchange in Aminium-Methanesulfonate Aerosols. Abstract: Aerosol particles are ubiquitous in the atmosphere...

  8. Gate-tunable exchange coupling between cobalt clusters on graphene...

    Office of Scientific and Technical Information (OSTI)

    Accepted Manuscript: Gate-tunable exchange coupling between cobalt clusters on graphene Citation Details Title: Gate-tunable exchange coupling between cobalt clusters on...

  9. Rapid electron exchange between surface-exposed bacterial cytochromes...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    electron exchange between surface-exposed bacterial cytochromes and Fe(III) minerals. Rapid electron exchange between surface-exposed bacterial cytochromes and Fe(III) minerals....

  10. Proton Exchange Membrane Fuel Cells for Electrical Power Generation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Proton Exchange Membrane Fuel Cells for Electrical Power Generation On-Board Commercial Airplanes Proton Exchange Membrane Fuel Cells for Electrical Power Generation On-Board...

  11. Kitchen Appliance Upgrades Improve Water Efficiency at DOD Exchange...

    Broader source: Energy.gov (indexed) [DOE]

    Kitchen Appliance Upgrades Improve Water Efficiency at DOD Exchange Facilities Case study details the U.S. Department of Defense (DOD) Exchange (formerly the Army and Air Force...

  12. A Thermoelectric Generator with an Intermediate Heat Exchanger...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Thermoelectric Generator with an Intermediate Heat Exchanger for Automotive Waste Heat Recovery System A Thermoelectric Generator with an Intermediate Heat Exchanger for...

  13. Lessons Learned: Peer Exchange Calls Fall 2014 | Department of...

    Energy Savers [EERE]

    Calls Fall 2014 Lessons Learned: Peer Exchange Calls Fall 2014 Better Buildings Residential Network, Lessons Learned: Peer Exchange Calls Fall 2014. Lessons Learned: Peer...

  14. Supercritical Carbon Dioxide Turbo-Expander and Heat Exchangers...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Supercritical Carbon Dioxide Turbo-Expander and Heat Exchangers Supercritical Carbon Dioxide Turbo-Expander and Heat Exchangers This fact sheet describes a supercritical carbon...

  15. Program Sustainability Peer Exchange Call: Transitioning to a...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Program Sustainability Peer Exchange Call: Transitioning to a Utility Funded Program Environment: What Do I Need to Know? (January 17, 2013) Program Sustainability Peer Exchange...

  16. Computer Science Department Technical Report

    E-Print Network [OSTI]

    Shahriar, Selim

    questions on querying and attack-resilience of CDDHT are also discussed. #12;Keywords: security, distributed intrusion detection systems, distributed hash table #12;1 Cyber Disease Monitoring with Distributed HashComputer Science Department Technical Report NWU-CS-04-40 July 12, 2004 Cyber Disease Monitoring

  17. Invite Paper Fall Technical Meeting

    E-Print Network [OSTI]

    Gomez, Alessandro

    within which it is sensible to make predictions, combustion is here to stay. In addition to oil1 Invite Paper Fall Technical Meeting of the Eastern States Section of the Combustion Institute: A Laboratory-Scale Benchmark for Turbulent Combustion Studies Alessandro Gomez Department of Mechanical

  18. Technical Note 499 December1990

    E-Print Network [OSTI]

    Technical Note 499 · December1990 Interpretation as Abduction Jerry R. Hobbs, Mark Stickel;Interpretation as Abduction Jerry R. Hobbs, Mark Stickel, Douglas Appelt, and Paul Martin Artificial Intelligence Center SRI International Abstract Abduction is inference to the best explanation. In the TACITUS project

  19. DOE FINAL TECHNICAL REPORT RP

    SciTech Connect (OSTI)

    RUSS PETERMAN

    2012-01-01T23:59:59.000Z

    The City of Georgetown Utility Systems (GUS) patnered with the private sector, the American Public Power Association (APPA) and Southwestern University to design, construct, test and monitor a solar co-generation system directly connected to the GUS electric distribution system. This report consists of the Primary Technical Report and 3 attachments.

  20. Modularized training for technical editors

    SciTech Connect (OSTI)

    Murphy, P.W.

    1988-09-08T23:59:59.000Z

    This paper outlines the editorial services provided at the Lawrence Livermore National Laboratory (LLNL), sketches a syllabus of basic training for technical editors, describes the approach being used to develop this cost-effective individualized instruction for editors (experienced or not) new to work at LLNL, and enumerates the advantages of this approach. 8 refs.

  1. Defense Technical Information Center thesaurus

    SciTech Connect (OSTI)

    Dickert, J.H. [ed.] [comp.

    1996-10-01T23:59:59.000Z

    This DTIC Thesaurus provides a basic multidisciplinary subject term vocabulary used by DTIC to index and retrieve scientific and technical information from its various data bases and to aid DTIC`s users in their information storage and retrieval operations. It includes an alphabetical posting term display, a hierarchy display, and a Keywork Out of Context (KWOC) display.

  2. Facility worker technical basis document

    SciTech Connect (OSTI)

    EVANS, C.B.

    2003-03-21T23:59:59.000Z

    This report documents the technical basis for facility worker safety to support the Tank Farms Documented Safety Analysis and described the criteria and methodology for allocating controls to hazardous conditions with significant facility worker consequences and presents the results of the allocation.

  3. Mechanical Engineering Department technical review

    SciTech Connect (OSTI)

    Carr, R.B.; Abrahamson, L.; Denney, R.M.; Dubois, B.E (eds.) [eds.

    1982-01-01T23:59:59.000Z

    Technical achievements and publication abstracts related to research in the following Divisions of Lawrence Livermore Laboratory are reported in this biannual review: Nuclear Fuel Engineering; Nuclear Explosives Engineering; Weapons Engineering; Energy Systems Engineering; Engineering Sciences; Magnetic Fusion Engineering; and Material Fabrication. (LCL)

  4. Deleware Water Resources Center Annual Technical Report

    E-Print Network [OSTI]

    of best management practices (BMPs) by private businesses, and improved storm water management & wetlandsDeleware Water Resources Center Annual Technical Report FY 2002 Introduction Delaware Water Resources Center Annual Technical Report Introduction and Program Management/Administration Description FY

  5. Biodiesel ASTM Update and Future Technical Needs

    Broader source: Energy.gov (indexed) [DOE]

    ASTM Update and Future Technical Needs Steve Howell Technical Director National Biodiesel Board ASTM Current Status ASTM D6751 is the approved standard for B100 for blending up to...

  6. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-00-1795-S 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  7. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-05/0-4485-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  8. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-00/0-1843-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  9. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-03/4083-2 2. Government Accession No. 3. This document is available to the public through the National Technical Information Service, Springfield

  10. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Zornberg, Jorge G.

    Technical Report Documentation Page 1. Report No. FHWA/TX-12/5-4829-01-3 2. Government Accession No No restrictions. This document is available to the public through the National Technical Information Service

  11. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-0-1814-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  12. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Zornberg, Jorge G.

    Technical Report Documentation Page 1. Report No. FHWA/TX-10/0-5812-1 2. Government Accession No. 3. This document is available to the public through the National Technical Information Service, Springfield

  13. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-03-1838-8 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  14. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-00/1754-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  15. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-05/9-580/589-2 2. Government Accession No. Distribution Statement No restrictions. This document is available to the public through the National Technical

  16. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-04/1778-4 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  17. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-04/0-1734-S 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  18. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-11/0-6348-1 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  19. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-00/1785-2 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  20. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-03/4386-1 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  1. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-06/0-4085-5 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  2. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-06/0-1401-2 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  3. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-10/0-5974-1 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  4. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-04/0-1471-4 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  5. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-0-1748-2 2. Government Accession No. 3. This document is available to the public through the National Technical Information Service, Springfield

  6. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-04/0-4808-1 2. Government Accession No. 3. This document is available to the public through the National Technical Information Service, Springfield

  7. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-04/5-3933-01-P1-4 2. Government Accession No restrictions. This document is available to the public through the National Technical Information Service

  8. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-06/0-4437-1 2. Government Accession No. 3. This document is available to the public through the National Technical Information Service, Springfield

  9. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-06/5-4975-01-1 2. Government Accession No. This document is available to the public through the National Technical Information Service, Springfield

  10. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-06/0-4185-4 2. Government Accession No. 3. This document is available to the public through the National Technical Information Service, Springfield

  11. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-06/0-4958-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  12. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-11/0-6095-2 2. Government Accession No. 3 Statement No restrictions. This document is available to the public through the National Technical

  13. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-07/0-1700-7 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  14. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-07/0-5410-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  15. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-05/0-4661-1 2. Government Accession No. 3. This document is available to the public through the National Technical Information Service, Springfield

  16. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-04/0-1700-1 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  17. PRELIMINARY REVIEW COPY Technical Report Documentation Page

    E-Print Network [OSTI]

    Zornberg, Jorge G.

    PRELIMINARY REVIEW COPY Technical Report Documentation Page 1. Report No. FHWA/TX-13/0-6603-2 2 No restrictions. This document is available to the public through the National Technical Information Service

  18. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-04/4576-3 2. Government Accession No. 3 Statement No restrictions. This document is available to the public through the National Technical

  19. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-09/0-5799-1 2. Government Accession No. 3 Statement No restrictions. This document is available to the public through the National Technical

  20. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-7-4957-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  1. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-05/0-4416-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  2. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-07/0-1895-1 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  3. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-0-2129-1 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  4. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-07/0-5068-2 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  5. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-05/0-4410-2 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  6. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-09/0-5830-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  7. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-05/0-4069-1 2. Government Accession No. 3. This document is available to the public through the National Technical Information Service, Springfield

  8. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. 9-572-1 2. Government Accession No. 3. Recipient Statement No restrictions. This document is available to the public through the National Technical

  9. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-06/0-4661-2 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  10. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-05/0-1713-1 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  11. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Zornberg, Jorge G.

    Technical Report Documentation Page 1. Report No. FHWA/TX-07/0-5202-2 2. Government Accession No. 3 No restrictions. This document is available to the public through the National Technical Information Service

  12. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-05/0-4185-3 2. Government Accession No. 3 Statement No restrictions. This document is available to the public through the National Technical

  13. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-10/0-5973-2 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  14. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Zornberg, Jorge G.

    Technical Report Documentation Page 1. Report No. FHWA/TX-13/5-4829-01-2 2. Government Accession No. This document is available to the public through the National Technical Information Service, Springfield

  15. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-05/0-1713-2 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  16. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-07/0-5176-2 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  17. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-05/5-1924-01-1 2. Government Accession No No restrictions. This document is available to the public through the National Technical Information Service

  18. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-09/0-5668-1 2. Government Accession No. 3. Distribution Statement No restrictions. This document is available to the public through the National Technical

  19. Space Conditioning Standing Technical Committee Strategic Plan

    Broader source: Energy.gov [DOE]

    This strategic plan document outlines the gaps, barriers, and opportunities identified by the Building America Space Conditioning Standing Technical Committee.

  20. Supporting Technical Documents | Department of Energy

    Office of Environmental Management (EM)

    Environmental Department (NMED) Los Alamos National Laboratory (LANL) Hazardous Waste Facility Permit Supporting Technical Document for the Radiological Release Accident...

  1. 4. Heat exchangers; Steam, steam processes

    E-Print Network [OSTI]

    Zevenhoven, Ron

    pictures: KJ05 Temperature distributions of fluid in (a) counterflow, (b) parallel flow, and (c) 1 shell pass and 2 tubes passes. #12;7/74 Heat exchangers: Geometries /3 Temperature distribution in a counter

  2. Markets, distribution, and exchange after societal cataclysm

    SciTech Connect (OSTI)

    Cantor, R.A.; Henry, S.; Rayner, S. (Oak Ridge National Lab., TN (USA); Eastern Michigan Univ., Ypsilanti, MI (USA). Dept. of Sociology; Oak Ridge National Lab., TN (USA))

    1989-11-01T23:59:59.000Z

    The report identifies constraints and opportunities for the restoration of economic exchange following nuclear war. Four survival scenarios are postulated based on high or low levels of damage to (1) institutions that signal trading opportunities, reduce transaction costs, and regulate and enforce contracts, and (2) resources that are used to create and define wealth. The four scenarios are best case, worst case, resource abundance, and an institution intensive case. Three kinds of literature were reviewed, (1) the economics literature on formal markets, (2) the sociological literature on informal markets, and (3) the economic anthropology literature on pre-capitalist and pre-industrial exchange. From this corpus a set of non-market and market exchange structures are derived and rendered as rules vectors describing their operation. Each of the four survival scenarios is expounded as a subset of the possible exchange structures that is logically compatible with the constraints defining that scenario. 242 refs.

  3. Configuring Entourage 2008 w/ Exchange Web Services. Note: These instruction assume that the Exchange Web Services (EWS) Update

    E-Print Network [OSTI]

    Blackwell, Keith

    Configuring Entourage 2008 w/ Exchange Web Services. Note: These instruction assume that the Exchange Web Services (EWS) Update , also known as Entourage 13.0, has already been

  4. The New Jersey Institute of Technology Technical Assistance for Brownfield Communities (NJIT TAB) Program for USEPA Regions 1, 2 and 3 is proud to be a

    E-Print Network [OSTI]

    Bieber, Michael

    The New Jersey Institute of Technology Technical Assistance for Brownfield Communities (NJIT TAB vision is a lively, intense exchange of ideas regarding sustainability and brownfields. More at www.nscw.net Panel Topics to Include: ·The Insider's Guide to Brownfield Redevelopment in Bad Times ·The Sustainable

  5. UNITED STATES NUCLEAR WASTE TECHNICAL REVIEW BOARD

    E-Print Network [OSTI]

    UNITED STATES NUCLEAR WASTE TECHNICAL REVIEW BOARD 2300 Clarendon Boulevard, Suite 1300 Arlington are pleased to transmit a technical report prepared by the Nuclear Waste Technical Review Board (Board. Based on its review of data gathered by the DOE and the Center for Nuclear Waste Regulatory Analyses

  6. Effective Community-Wide Policy Technical Assistance

    E-Print Network [OSTI]

    Effective Community-Wide Policy Technical Assistance: The DOE/NREL Approach NREL is a national: The DOE/NREL Approach Effective Community-Wide Policy Technical Assistance: The DOE/NREL Approach HelpingVoss, Sarah Busche, Eric Lantz, Lynn Billman, and Dan Beckley. The layout and technical editing were

  7. Heat Exchanger Technologies for Distillation Columns

    E-Print Network [OSTI]

    Polley, G. T.

    Heat Exchanger Technologies for Distillation Columns G.T.Polley Pinchtechnology.com In this paper we look at the challenges that improvements in energy efficiency of distillation systems presents the heat exchanger designer. We examine... condensate sub-cooling. So, if this condensate subsequently requires re-heating both energy and capital have been wasted. If the condensate forms a feed to another distillation column it results in increased energy consumption if that separation...

  8. Heat exchanger for power generation equipment

    DOE Patents [OSTI]

    Nirmalan, Nirm Velumylm; Bowman, Michael John

    2005-06-14T23:59:59.000Z

    A heat exchanger for a turbine is provided wherein the heat exchanger comprises a heat transfer cell comprising a sheet of material having two opposed ends and two opposed sides. In addition, a plurality of concavities are disposed on a surface portion of the sheet of material so as to cause hydrodynamic interactions and affect a heat transfer rate of the turbine between a fluid and the concavities when the fluid is disposed over the concavities.

  9. Integrated Approach to Revamping Heat Exchangers Networks

    E-Print Network [OSTI]

    Glass, K. E.; Dhole, V.; Wang, Y.

    geometry configurations for a given set of process conditions. Develop simulation model (in Aspen Plus) incorporating rigorous heat exchanger (Aspen Hetran) models for the 1) Validate existing preheat train performance & evaluate the existing and de...-bottlenecked cases de-bottlenecked performance Initiate pinch analysis (using Aspen Pinch) directly 2) Determine feasible energy saving from (Aspen Plus) simulation results Heat exchanger network pinch analysis (using Aspen Pinch) incorporating rigorous (Aspen...

  10. Small Column Ion Exchange Design and Safety Strategy

    SciTech Connect (OSTI)

    Huff, T.; Rios-Armstrong, M.; Edwards, R.; Herman, D.

    2011-02-07T23:59:59.000Z

    Small Column Ion Exchange (SCIX) is a transformational technology originally developed by the Department of Energy (DOE) Environmental Management (EM-30) office and is now being deployed at the Savannah River Site (SRS) to significantly increase overall salt processing capacity and accelerate the Liquid Waste System life-cycle. The process combines strontium and actinide removal using Monosodium Titanate (MST), Rotary Microfiltration, and cesium removal using Crystalline Silicotitanate (CST, specifically UOP IONSIV{reg_sign}IE-911 ion exchanger) to create a low level waste stream to be disposed in grout and a high level waste stream to be vitrified. The process also includes preparation of the streams for disposal, e.g., grinding of the loaded CST material. These waste processing components are technically mature and flowsheet integration studies are being performed including glass formulations studies, application specific thermal modeling, and mixing studies. The deployment program includes design and fabrication of the Rotary Microfilter (RMF) assembly, ion-exchange columns (IXCs), and grinder module, utilizing an integrated system safety design approach. The design concept is to install the process inside an existing waste tank, Tank 41H. The process consists of a feed pump with a set of four RMFs, two IXCs, a media grinder, three Submersible Mixer Pumps (SMPs), and all supporting infrastructure including media receipt and preparation facilities. The design addresses MST mixing to achieve the required strontium and actinide removal and to prevent future retrieval problems. CST achieves very high cesium loadings (up to 1,100 curies per gallon (Ci/gal) bed volume). The design addresses the hazards associated with this material including heat management (in column and in-tank), as detailed in the thermal modeling. The CST must be size reduced for compatibility with downstream processes. The design addresses material transport into and out of the grinder and includes provisions for equipment maintenance including remote handling. The design includes a robust set of nuclear safety controls compliant with DOE Standard (STD)-1189, Integration of Safety into the Design Process. The controls cover explosions, spills, boiling, aerosolization, and criticality. Natural Phenomena Hazards (NPH) including seismic event, tornado/high wind, and wildland fire are considered. In addition, the SCIX process equipment was evaluated for impact to existing facility safety equipment including the waste tank itself. SCIX is an innovative program which leverages DOE's technology development capabilities to provide a basis for a successful field deployment.

  11. Linac4 Technical Design Report

    E-Print Network [OSTI]

    Arnaudon, L; Baylac, M; Bellodi, G; Body, Y; Borburgh, J; Bourquin, P; Broere, J; Brunner, O; Bruno, L; Carli, C; Caspers, Friedhelm; Cousineau, S M; Cuvet, Y; De Almeida Martins, C; Dobers, T; Fowler, T; Garoby, R; Gerigk, F; Goddard, B; Hanke, K; Hori, M; Jones, M; Kahle, K; Kalbreier, Willi; Kroyer, T; Küchler, D; Lombardi, A M; López-Hernandez, L A; Magistris, M; Martini, M; Maury, S; Page, E; Paoluzzi, M; Pasini, M; Raich, U; Rossi, C; Royer, J P; Sargsyan, E; Serrano, J; Scrivens, R; Silari, M; Timmins, M; Venturini-Delsolaro, W; Vretenar, M; Wegner, R; Weterings, W; Zickler, T

    2006-01-01T23:59:59.000Z

    Linac4 is an H- linear accelerator, intended to replace Linac2 as injector to the PS Booster (PSB). By delivering to the PSB a beam at 160 MeV energy, Linac4 will provide the conditions to double the brightness and intensity of the beam from the PSB, thus removing the first bottleneck towards higher brightness for the LHC and simplifying operation. Moreover, this new linac constitutes an essential component of any of the envisaged LHC upgrade scenarios and could open the way to future extensions of the CERN accelerator complex towards higher performance. This Technical Design Report presents a detailed technical overview of the Linac4 design as it stands at end 2006.

  12. FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

    SciTech Connect (OSTI)

    KRIPPS, L.J.

    2005-02-18T23:59:59.000Z

    This document describes the qualitative evaluation of frequency and consequences for double shell tank (DST) and single shell tank (SST) representative flammable gas accidents and associated hazardous conditions without controls. The evaluation indicated that safety-significant SSCs and/or TSRS were required to prevent or mitigate flammable gas accidents. Discussion on the resulting control decisions is included. This technical basis document was developed to support of the Tank Farms Documented Safety Analysis (DSA) and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence.

  13. FACILITY WORKER TECHNICAL BASIS DOCUMENT

    SciTech Connect (OSTI)

    SHULTZ, M.V.

    2005-03-31T23:59:59.000Z

    This technical basis document was developed to support RPP-13033, ''Tank Farms Documented Safety Analysis (DSA). It describes the criteria and methodology for allocating controls to hazardous conditions with significant facility worker (FW) consequence and presents the results of the allocation. The criteria and methodology for identifying controls that address FW safety are in accordance with DOE-STD-3009-94, ''Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses''.

  14. Technical Assistance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center HomeIdle ReductionOffices Offices AllFeeds RSSSustainableTechnical

  15. (Solar clothes dryer and wastewater heat exchanger). Final report

    SciTech Connect (OSTI)

    Baer, B.F.

    1984-12-04T23:59:59.000Z

    The first project investigated the technical possibilities of adapting a domestic electric clothes dryer to utilize solar-heated water as the heat source, replacing electric resistance heat. The second project attempted to extract wastewater heat from a commercial dishwasher to preheat fresh water to be used in the next dish washing cycle. It is felt that the clothes dryer project has met all of intended goals. Although a solar application has some real-world practical problems, the application of a dryer connected directly to the home heating system will prove to be cost-beneficial over the life of a dryer. The additional cost of a heat exchanger is not excessive, and the installation cost, if installed with the initial house plumbing is less than $100. From a practical point of view, the complexity of installing a wastewater heat extracter is considered impractical. The environment in which such equipment must operate is difficult at best, and most restaurants prefer to maintain as simple an operation as possible. If problems were to occur in this type of equipment, the kitchen would effectively be crippled. In conclusion, further research in the concept is not recommended. Recent advances in commercial dishwashers have also considerably reduced the heat losses which accompanied equipment only a few years old.

  16. Climate control of terrestrial carbon exchange across biomes and continents

    E-Print Network [OSTI]

    Yi, C.; Ricciuota, D.; Goulden, M. L.

    2010-01-01T23:59:59.000Z

    Wind Energy Division, Risø National Laboratory for Sustainable Energy, Technical University of Denmark,

  17. Interfacial Co nanolayers for enhancing interlayer exchange coupling in antiferromagnetic interlayer exchange coupling media

    E-Print Network [OSTI]

    Laughlin, David E.

    Interfacial Co nanolayers for enhancing interlayer exchange coupling in antiferromagnetic of the interlayer coupling strength has been achieved by depositing Co nanolayers on both sides of the Ru layer in a conventional CoCrPt/Ru/CoCrPt antiferromagnetic interlayer exchange coupling structure. The interlayer coupling

  18. Nanoheterostructure Cation Exchange: Anionic Framework Conservation

    SciTech Connect (OSTI)

    Jain, Prashant K.; Amirav, Lilac; Aloni, Shaul; Alivisatos, A. Paul

    2010-05-11T23:59:59.000Z

    In ionic nanocrystals the cationic sub-lattice can be replaced with a different metal ion via a fast, simple, and reversible place-exchange, allowing post-synthetic modification of the composition of the nanocrystal, while preserving its size and shape. Here, we demonstrate for the first time that during such an exchange, the anionic framework of the crystal is preserved. When applied to nanoheterostructures, this phenomenon ensures that compositional interfaces within the heterostructure are conserved throughout the transformation. For instance, a morphology composed of a CdSe nanocrystal embedded in a CdS rod (CdSe/CdS) was exchanged to a PbSe/PbS nanorod via a Cu2Se/Cu2S structure. During every exchange cycle, the seed size and position within the nanorod were preserved, as evident by excitonic features, Z-contrast imaging, and elemental line-scans. Anionic framework conservation extends the domain of cation exchange to the design of more complex and unique nanostructures.

  19. Technical Report Confirms Reliability of Yucca Mountain Technical Work |

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2, 2015 - January 16,Administrative Forms TechnicalDepartment of Energy

  20. Heat exchanger for coal gasification process

    DOE Patents [OSTI]

    Blasiole, George A. (Greensburg, PA)

    1984-06-19T23:59:59.000Z

    This invention provides a heat exchanger, particularly useful for systems requiring cooling of hot particulate solids, such as the separated fines from the product gas of a carbonaceous material gasification system. The invention allows effective cooling of a hot particulate in a particle stream (made up of hot particulate and a gas), using gravity as the motive source of the hot particulate. In a preferred form, the invention substitutes a tube structure for the single wall tube of a heat exchanger. The tube structure comprises a tube with a core disposed within, forming a cavity between the tube and the core, and vanes in the cavity which form a flow path through which the hot particulate falls. The outside of the tube is in contact with the cooling fluid of the heat exchanger.

  1. Low exchange element for nuclear reactor

    DOE Patents [OSTI]

    Brogli, Rudolf H. (Aarau, CH); Shamasunder, Bangalore I. (Encinitas, CA); Seth, Shivaji S. (Encinitas, CA)

    1985-01-01T23:59:59.000Z

    A flow exchange element is presented which lowers temperature gradients in fuel elements and reduces maximum local temperature within high temperature gas-cooled reactors. The flow exchange element is inserted within a column of fuel elements where it serves to redirect coolant flow. Coolant which has been flowing in a hotter region of the column is redirected to a cooler region, and coolant which has been flowing in the cooler region of the column is redirected to the hotter region. The safety, efficiency, and longevity of the high temperature gas-cooled reactor is thereby enhanced.

  2. Heat Exchanger With Internal Pin Elements

    DOE Patents [OSTI]

    Gerstmann, Joseph (Framingham, MA); Hannon, Charles L. (Arlington, MA)

    2004-01-13T23:59:59.000Z

    A heat exchanger/heater comprising a tubular member having a fluid inlet end, a fluid outlet end and plurality of pins secured to the interior wall of the tube. Various embodiments additionally comprise a blocking member disposed concentrically inside the pins, such as a core plug or a baffle array. Also disclosed is a vapor generator employing an internally pinned tube, and a fluid-heater/heat-exchanger utilizing an outer jacket tube and fluid-side baffle elements, as well as methods for heating a fluid using an internally pinned tube.

  3. Confronting Dilaton-exchange gravity with experiments

    E-Print Network [OSTI]

    H. V. Klapdor-Kleingrothaus; H. Päs; U. Sarkar

    2000-08-16T23:59:59.000Z

    We study the experimental constraints on theories, where the equivalence principle is violated by dilaton-exchange contributions to the usual graviton-exchange gravity. We point out that in this case it is not possible to have any CPT violation and hence there is no constraint from the CPT violating measurements in the $K-$system. The most stringent bound is obtained from the $K_L - K_S$ mass difference. In contrast, neither neutrino oscillation experiments nor neutrinoless double beta decay imply significant constraints.

  4. Efficient data exchange: Integrating a vector GIS with an object-oriented, 3-D visualization system

    SciTech Connect (OSTI)

    Kuiper, J.; Ayers, A.; Johnson, R. [Argonne National Lab., IL (United States); Tolbert-Smith, M. [USDOE Germantown, Maryland (United States). Office of Program Integration

    1996-03-01T23:59:59.000Z

    A common problem encountered in Geographic Information System (GIS) modeling is the exchange of data between different software packages to best utilize the unique features of each package. This paper describes a project to integrate two systems through efficient data exchange. The first is a widely used GIS based on a relational data model. This system has a broad set of data input, processing, and output capabilities, but lacks three-dimensional (3-D) visualization and certain modeling functions. The second system is a specialized object-oriented package designed for 3-D visualization and modeling. Although this second system is useful for subsurface modeling and hazardous waste site characterization, it does not provide many of the, capabilities of a complete GIS. The system-integration project resulted in an easy-to-use program to transfer information between the systems, making many of the more complex conversion issues transparent to the user. The strengths of both systems are accessible, allowing the scientist more time to focus on analysis. This paper details the capabilities of the two systems, explains the technical issues associated with data exchange and how they were solved, and outlines an example analysis project that used the integrated systems.

  5. A self-circulating heat exchanger for use in stirling and thermoacoustic-stirling engines

    SciTech Connect (OSTI)

    Backhaus, S. N. (Scott N.); Reid, R. S. (Robert Stowers)

    2004-01-01T23:59:59.000Z

    A major technical hurdle to the implementation of large Stirling engines or thermoacoustic engines is the reliability, performance, and manufacturability of the hot heat exchanger that brings high-temperature heat into the engine. Unlike power conversion devices that utilize steady flow, the oscillatory nature of the flow in Stirling and thermoacoustic engines restricts the length of a traditional hot heat exchanger to a peak-to-peak gas displacement, which is usually around 0.2 meters or less. To overcome this restriction, a new hot heat exchanger has been devised that uses a fluid diode in a looped pipe, which is resonantly driven by the oscillating gas pressure in the engine itself, to circulate the engine's working fluid around the loop. Instead of thousands of short, intricately interwoven passages that must be individually sealed, this new design consists of a few pipes that are typically 10 meters long. This revolutionary approach eliminates thousands of hermetic joints, pumps the engine's working fluid to and from a remote heat source without using moving parts, and does so without compromising on heat transfer surface area. Test data on a prototype loop integrated with a 1-kW thermoacoustic engine will be presented.

  6. Scientific and Technical Information Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-04-09T23:59:59.000Z

    To establish Department of Energy (DOE) requirements and responsibilities to ensure that scientific and technical information (STI) is identified, processed, disseminated, and preserved in a manner that (a) enables the scientific community and the public to locate and use the unclassified and unlimited STI resulting from DOE's research and related endeavors and (b) ensures access to classified and sensitive unclassified STI is protected according to legal or Departmental requirements. Cancels DOE O 241.1. Canceled by DOE O 241.1A Chg 1.

  7. PVWatts Version 1 Technical Reference

    SciTech Connect (OSTI)

    Dobos, A. P.

    2013-10-01T23:59:59.000Z

    The NREL PVWatts(TM) calculator is a web application developed by the National Renewable Energy Laboratory (NREL) that estimates the electricity production of a grid-connected photovoltaic system based on a few simple inputs. PVWatts combines a number of sub-models to predict overall system performance, and makes several hidden assumptions about performance parameters. This technical reference details the individual sub-models, documents assumptions and hidden parameters, and explains the sequence of calculations that yield the final system performance estimation.

  8. Technical Assistance | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO Overview OCHCOSystems Analysis Success Stories SystemsTara Trujillo AboutTechnical

  9. Technical Assistance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMayDepartment ofEnergyTeam Cumberland » TeamTechnical Assistance

  10. SAM Photovoltaic Model Technical Reference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection TechnicalResonantNovember 15Rotary FiringRobertSAC HomePastSAM

  11. Report Back from Technical Editor

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Technical s o Freiberge s 3 % A PB 2 7 7 2 x> - ^Rep.LANSv_^ '

  12. Technical Reports | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening a solidSynthesis of 2D AlloysTrails News Home |21-6-9Technical

  13. Revised Thermal Analysis of LANL Ion Exchange Column

    SciTech Connect (OSTI)

    Laurinat, J

    2006-04-11T23:59:59.000Z

    This document updates a previous calculation of the temperature distributions in a Los Alamos National Laboratory (LANL) ion exchange column.1 LANL operates two laboratory-scale anion exchange columns, in series, to extract Pu-238 from nitric acid solutions. The Defense Nuclear Facilities Safety Board has requested an updated analysis to calculate maximum temperatures for higher resin loading capacities obtained with a new formulation of the Reillex HPQ anion exchange resin. The increased resin loading capacity will not exceed 118 g plutonium per L of resin bed. Calculations were requested for normal operation of the resin bed at the minimum allowable solution feed rate of 30 mL/min and after an interruption of flow at the end of the feed stage, when one of the columns is fully loaded. The object of the analysis is to demonstrate that the decay heat from the Pu-238 will not cause resin bed temperatures to increase to a level where the resin significantly degrades. At low temperatures, resin bed temperatures increase primarily due to decay heat. At {approx}70 C a Low Temperature Exotherm (LTE) resulting from the reaction between 8-12 M HNO{sub 3} and the resin has been observed. The LTE has been attributed to an irreversible oxidation of pendant ethyl benzene groups at the termini of the resin polymer chains by nitric acid. The ethyl benzene groups are converted to benzoic acid moities. The resin can be treated to permanently remove the LTE by heating a resin suspension in 8M HNO{sub 3} for 30-45 minutes. No degradation of the resin performance is observed after the LTE removal treatment. In fact, heating the resin in boiling ({approx}115-120 C) 12 M HNO{sub 3} for 3 hr displays thermal stability analogous to resin that has been treated to remove the LTE. The analysis is based on a previous study of the SRS Frames Waste Recovery (FWR) column, performed in support of the Pu-238 production campaign for NASA's Cassini mission. In that study, temperature transients following an interruption of flow to the column were calculated. The transient calculations were terminated after the maximum resin bed temperature reached the Technical Standard of 60 C, which was set to prevent significant resin degradation. The LANL column differs from the FWR column in that it has a significantly smaller radius, 3.73 cm nominal versus approximately 28 cm. It follows that natural convection removes heat much more effectively from the LANL column, so that the column may reach thermal equilibrium. Consequently, the calculations for a flow interruption were extended until an approach to thermal equilibrium was observed. The LANL ion exchange process also uses a different resin than was used in the FWR column. The LANL column uses Reillex HPQ{trademark} resin, which is more resistant to attack by nitric acid than the Ionac 641{trademark} resin used in the FWR column. Heat generation from the resin oxidation reaction with nitric acid is neglected in this analysis since LANL will be treating the resin to remove the LTE prior to loading the resin in the columns. Calculations were performed using a finite difference computer code, which incorporates models for absorption and elution of plutonium and for forced and natural convection within the resin bed. Calculations for normal column operation during loading were performed using an initial temperature and a feed temperature equal to the ambient air temperature. The model for the normal flow calculations did not include natural convection within the resin bed. The no flow calculations were started with the temperature and concentration profiles at the end of the loading stage, when there would be a maximum amount of plutonium either adsorbed on the resin or in the feed solution in the column.

  14. TECHNICAL ADVANCEMENTS AND ISSUES ASSOCIATED WITH

    E-Print Network [OSTI]

    of Energy United States Nuclear Waste Technical Review Board #12;#12;U.S. Nuclear Waste Technical Review in the report are those of the Board and not necessarily those of the reviewers. #12;U.S. NUCLEAr WASTE TECh.D., P.E. Duke University Durham, North Carolina #12;NUCLEAr WASTE TEChNiCAL rEviEW BOArD STAff EXECUTIVE

  15. Technical Qualification Program Description - Integrated Support...

    Broader source: Energy.gov (indexed) [DOE]

    to begin the 18 month qualification period). Technical Qualification Program Description Revision 2, November 2010 5 The position's inclusion in the TQP is: * Specified in the PD...

  16. Technical Position, Regarding Acceptable Methods for Assessing...

    Office of Environmental Management (EM)

    Regarding Acceptable Methods for Assessing and Recording Radiation Doses to Individuals Technical Position, Regarding Acceptable Methods for Assessing and Recording Radiation Doses...

  17. Dampers for Natural Draft Heaters: Technical Report

    E-Print Network [OSTI]

    Lutz, James D.

    2009-01-01T23:59:59.000Z

    Oil? Fired Residential Water Heaters. Berkeley Heights, Newof Residential Gas Water Heaters. Chicago, IL, Gas ApplianceDampers for Natural Draft Water Heaters: Technical Report.

  18. Technical Consultant Contract | Department of Energy

    Energy Savers [EERE]

    Program (STEP). C3c Technical Consultant Contract.pdf More Documents & Publications Communication Consultant Contract Communications Consultant RFP Loan Loss Reserve Agreement...

  19. APPA Engineering and Operations Technical Conference

    Office of Energy Efficiency and Renewable Energy (EERE)

    The 2014 APPA Engineering and Operations Technical Conference is designed for public power professionals charged with designing, developing, and maintaining the nation's electric system.

  20. Space Conditioning Standing Technical Committee Strategic Plan...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Committee Strategic Plan Space Conditioning Standing Technical Committee Strategic Plan This strategic plan document outlines the gaps, barriers, and opportunities identified by...

  1. TR-003 Ecology March 2000 Technical Report

    E-Print Network [OSTI]

    TR-003 Ecology March 2000 Technical Report Research Disciplines: Ecology ~ Geology ~ Geomorphology: Ecology ~ Geology ~ Geomorphology ~ Hydrology ~ Pedology ~ Silviculture ~ Wildlife CONTENTS ABSTRACT

  2. Technical Standards, Program Project Justification Statement...

    Energy Savers [EERE]

    Standards, Program Project Justification Statement - August 29, 2012 August 29, 2012 DOE Technical Standards Program Project Justification Statement As part of the new...

  3. FAQS Reference Guide – General Technical Base

    Broader source: Energy.gov [DOE]

    This reference guide addresses the competency statements in the December 2007 edition of DOE-STD-1146-2007, General Technical Base Functional Area Qualification Standard.

  4. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. 1732-S 2. Government Accession No. 3. Recipients, geometric design, entrance ramps, exit ramps 18. Distribution Statement No restrictions. This document

  5. PRELIMINARY REVIEW COPY Technical Report Documentation Page

    E-Print Network [OSTI]

    Texas at Austin, University of

    PRELIMINARY REVIEW COPY Technical Report Documentation Page 1. Report No. 2941-3 Preliminary Review, long-term monitoring 18. Distribution Statement No restrictions. This document is available

  6. Energy Materials Coordinating Committee (EMaCC) Fiscal Year 1999 annual technical report

    SciTech Connect (OSTI)

    None

    2000-10-31T23:59:59.000Z

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department`s materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. This report summarizes EMaCC activities for FY 1999 and describes the materials research programs of various offices and divisions within the Department.

  7. Time Series Technical Analysis via new Fast Estimation Methods: A Preliminary Study in Mathematical Finance

    E-Print Network [OSTI]

    Fliess, Michel

    2008-01-01T23:59:59.000Z

    New fast estimation methods stemming from control theory lead to a fresh look at time series, which bears some resemblance to "technical analysis". The results are applied to a typical object of financial engineering, namely the forecast of foreign exchange rates, via a "model-free" setting, i.e., via repeated identifications of low order linear difference equations on sliding short time windows. Several convincing computer simulations, including the prediction of the position and of the volatility with respect to the forecasted trendline, are provided. $\\mathcal{Z}$-transform and differential algebra are the main mathematical tools.

  8. Comparative analysis of compact heat exchangers for application as the intermediate heat exchanger for advanced nuclear reactors

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bartel, N.; Chen, M.; Utgikar, V. P.; Sun, X.; Kim, I. H.; Christensen, R.; Sabharwall, P.

    2015-07-01T23:59:59.000Z

    A comparative evaluation of alternative compact heat exchanger designs for use as the intermediate heat exchanger in advanced nuclear reactor systems is presented in this article. Candidate heat exchangers investigated included the Printed circuit heat exchanger (PCHE) and offset strip-fin heat exchanger (OSFHE). Both these heat exchangers offer high surface area to volume ratio (a measure of compactness [m2/m3]), high thermal effectiveness, and overall low pressure drop. Helium–helium heat exchanger designs for different heat exchanger types were developed for a 600 MW thermal advanced nuclear reactor. The wavy channel PCHE with a 15° pitch angle was found to offer optimummore »combination of heat transfer coefficient, compactness and pressure drop as compared to other alternatives. The principles of the comparative analysis presented here will be useful for heat exchanger evaluations in other applications as well.« less

  9. Ion exchange polymers for anion separations

    DOE Patents [OSTI]

    Jarvinen, G.D.; Marsh, S.F.; Bartsch, R.A.

    1997-09-23T23:59:59.000Z

    Anion exchange resins including at least two positively charged sites and a well-defined spacing between the positive sites are provided together with a process of removing anions or anionic metal complexes from aqueous solutions by use of such resins. The resins can be substituted poly(vinylpyridine) and substituted polystyrene.

  10. Ion exchange polymers for anion separations

    DOE Patents [OSTI]

    Jarvinen, Gordon D. (Los Alamos, NM); Marsh, S. Fredric (Los Alamos, NM); Bartsch, Richard A. (Lubbock, TX)

    1997-01-01T23:59:59.000Z

    Anion exchange resins including at least two positively charged sites and a ell-defined spacing between the positive sites are provided together with a process of removing anions or anionic metal complexes from aqueous solutions by use of such resins. The resins can be substituted poly(vinylpyridine) and substituted polystyrene.

  11. DYNAMIC MODELING PROTON EXCHANGE MEMBRANE FUEL CELL

    E-Print Network [OSTI]

    Mease, Kenneth D.

    DYNAMIC MODELING PROTON EXCHANGE MEMBRANE FUEL CELL OVERVIEW Current/Completed Plug Power to garner SCAQMD funding for fuel cell testing GenCore system is sensitive to diluents · As built design stream to compensate for removal of EGR · Functionality of the modified GenCore Fuel Cell system

  12. Resource Exchange in the Rhizosphere: Molecular

    E-Print Network [OSTI]

    Gage, Daniel J.

    and Cell Biology, University of Connecticut, Storrs, Connecticut 06269; email: daniel.gage@uconn.edu Annu commodities exchange, where organic carbon flux from roots fuels decomposers that, in turn, can make nutrients--surrounded, from the beginning, by microbes and a soil faunal community. Today, plant roots pack or pepper

  13. Thermal Analysis of LANL Ion Exchange Column

    SciTech Connect (OSTI)

    Laurinat, J.E.

    1999-06-16T23:59:59.000Z

    This document reports results from an ion exchange column heat transfer analysis requested by Los Alamos National Laboratory (LANL). The object of the analysis is to demonstrate that the decay heat from the Pu-238 will not cause resin bed temperatures to increase to a level where the resin significantly degrades.

  14. UNIVERSITYOFIOANNIN ESN IOANNINA INTERNATIONAL EXCHANGE ERAS

    E-Print Network [OSTI]

    Dimakopoulos, Vassilios

    1 GUIDE FOR BEGINNERS UNIVERSITYOFIOANNIN A · ESN IOANNINA · INTERNATIONAL EXCHANGE ERAS M calendar City of Ioannina Survivor's guide Arriving in Ioannina A brief history Brief history of Ioannina will be first time visitors to Greece, the city of Ioannina and the University.This guide will help you navigate

  15. 8 Ecosystem Exchange 8.3 Introduction

    E-Print Network [OSTI]

    of momentum, sensible heat, H, latent heat, E, and carbon dioxide, Fc, and the energy budget. 8.4 Storage and carbon dioxide are described. Patterns of these exchanges are explained in relation to appropriate variables and controlling factors. The storage of mass and energy is presented first, followed by the fluxes

  16. SURVEY Real Analysis Exchange Vol. ??(?), ????, pp. 157

    E-Print Network [OSTI]

    Edgar, Gerald

    SURVEY Real Analysis Exchange Vol. ??(?), ????, pp. 1­57 G. A. Edgar, Department of Mathematics, The Ohio State University, Columbus, Ohio 43210, USA. email: edgar@math.ohio-state.edu TRANSSERIES: Hardy field, ordered field, differential field, log-exp series, ´Ecalle 1 #12;2 G. A. Edgar 4 Example

  17. Soladigm DOE Final Technical Report

    SciTech Connect (OSTI)

    None

    2011-12-31T23:59:59.000Z

    Soladigm's research has produced a fundamental improvement in the technology for dynamic windows by successfully transitioning a low-cost, high-performance dynamic glass fabrication process from a simple 2" research prototype into a full-scale manufacturing environment capable of producing commercial dynamic insulated glass units (IGUs), and developing and optimizing the production process to meet all specifications for mass commercial production. The technology developed under this project is a revolutionary process for fabricating electrochromic glass that today exceeds DOE's 2020 performance and reliability targets at a compelling consumer price point. Before this project, we had demonstrated 2" prototypes using our deposition process that met these performance targets. The goal of this project was to prove that we could transition this lab-scale process to a scalable, "inline" manufacturing process, leveraging existing manufacturing tools capable of achieving a commercially attractive pricepoint in the near-term. Under this project we demonstrated the technical effectiveness of our manufacturing process by achieving or exceeding all of our technical and performance targets for inline fabrication of electrochromic IGUs. These performance specifications exceed DOE's 2020 performance and reliability targets. We also demonstrated the economic feasibility of our manufacturing process by reaching an initial production process that will achieve our target costs, which are compatible with mass adoption.

  18. Remember Denver 2010? Positioning; not Marketing

    E-Print Network [OSTI]

    . GEO advocacy successfully increased tax credits for residential geothermal heat pump installations The purpose of the International Ground Source Heat Pump Association is to promote the growth of the ground source (also known as geothermal) industry by: Promoting the efficient use of ground source heat pumps

  19. Golden Field Office 15013 Denver West Parkway

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet), Geothermal TechnologiesGeothermalGo for the Gold inDepartment Going,5

  20. Golden Field Office 15013 Denver West Parkway

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet), Geothermal TechnologiesGeothermalGo for the Gold inDepartment

  1. Denver Gasoline and Diesel Retail Prices

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Buildingto17 3400, U.S. DEPARTMENTshort05) Energy R*y IEE4(82)6)kDemand and696

  2. Real Goods Solar Denver | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f < RAPID‎ | Roadmap Jump to:bJump to:Reaching Social Media Goals

  3. Denver Solar and Wind | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualPropertyd8c-a9ae-f8521cbb8489 No revision hasda62829c05bGabbs Valley Area (DOECounty,

  4. Roadmap: Technical and Applied Studies NonprofitHuman Services Bachelor of Technical and Applied Studies

    E-Print Network [OSTI]

    Sheridan, Scott

    Roadmap: Technical and Applied Studies ­ Nonprofit­Human Services ­ Bachelor of Technical-Aug-12/TET This roadmap is a recommended semester-by-semester plan of study for this major. However / SOC 32570 COMM 35864, COMT 36318 or Visit www.kent.edu/catalog/elr 2.000 2.000 #12;Roadmap: Technical

  5. Heat exchanger with transpired, highly porous fins

    DOE Patents [OSTI]

    Kutscher, Charles F. (Golden, CO); Gawlik, Keith (Boulder, CO)

    2002-01-01T23:59:59.000Z

    The heat exchanger includes a fin and tube assembly with increased heat transfer surface area positioned within a hollow chamber of a housing to provide effective heat transfer between a gas flowing within the hollow chamber and a fluid flowing in the fin and tube assembly. A fan is included to force a gas, such as air, to flow through the hollow chamber and through the fin and tube assembly. The fin and tube assembly comprises fluid conduits to direct the fluid through the heat exchanger, to prevent mixing with the gas, and to provide a heat transfer surface or pathway between the fluid and the gas. A heat transfer element is provided in the fin and tube assembly to provide extended heat transfer surfaces for the fluid conduits. The heat transfer element is corrugated to form fins between alternating ridges and grooves that define flow channels for directing the gas flow. The fins are fabricated from a thin, heat conductive material containing numerous orifices or pores for transpiring the gas out of the flow channel. The grooves are closed or only partially open so that all or substantially all of the gas is transpired through the fins so that heat is exchanged on the front and back surfaces of the fins and also within the interior of the orifices, thereby significantly increasing the available the heat transfer surface of the heat exchanger. The transpired fins also increase heat transfer effectiveness of the heat exchanger by increasing the heat transfer coefficient by disrupting boundary layer development on the fins and by establishing other beneficial gas flow patterns, all at desirable pressure drops.

  6. Triple loop heat exchanger for an absorption refrigeration system

    DOE Patents [OSTI]

    Reimann, Robert C. (Lafayette, NY)

    1984-01-01T23:59:59.000Z

    A triple loop heat exchanger for an absorption refrigeration system is disclosed. The triple loop heat exchanger comprises portions of a strong solution line for conducting relatively hot, strong solution from a generator to a solution heat exchanger of the absorption refrigeration system, conduit means for conducting relatively cool, weak solution from the solution heat exchanger to the generator, and a bypass system for conducting strong solution from the generator around the strong solution line and around the solution heat exchanger to an absorber of the refrigeration system when strong solution builds up in the generator to an undesirable level. The strong solution line and the conduit means are in heat exchange relationship with each other in the triple loop heat exchanger so that, during normal operation of the refrigeration system, heat is exchanged between the relatively hot, strong solution flowing through the strong solution line and the relatively cool, weak solution flowing through the conduit means. Also, the strong solution line and the bypass system are in heat exchange relationship in the triple loop heat exchanger so that if the normal flow path of relatively hot, strong solution flowing from the generator to an absorber is blocked, then this relatively, hot strong solution which will then be flowing through the bypass system in the triple loop heat exchanger, is brought into heat exchange relationship with any strong solution which may have solidified in the strong solution line in the triple loop heat exchanger to thereby aid in desolidifying any such solidified strong solution.

  7. affect gas exchange: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    were Ho, David 15 AIR-WATER GAS EXCHANGE: MECHANISMS GOVERNING THE COMBINED EFFECTS OF WIND AND RAIN ON THE GAS TRANSFER Geosciences Websites Summary: AIR-WATER GAS EXCHANGE:...

  8. activity gas exchange: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    were Ho, David 13 AIR-WATER GAS EXCHANGE: MECHANISMS GOVERNING THE COMBINED EFFECTS OF WIND AND RAIN ON THE GAS TRANSFER Geosciences Websites Summary: AIR-WATER GAS EXCHANGE:...

  9. affects gas exchange: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    were Ho, David 15 AIR-WATER GAS EXCHANGE: MECHANISMS GOVERNING THE COMBINED EFFECTS OF WIND AND RAIN ON THE GAS TRANSFER Geosciences Websites Summary: AIR-WATER GAS EXCHANGE:...

  10. Using Mobile Applications to Generate Customer Demand Peer Exchange...

    Energy Savers [EERE]

    Using Mobile Applications to Generate Customer Demand Peer Exchange Call Using Mobile Applications to Generate Customer Demand Peer Exchange Call March 12, 2015 3:00PM to 4:3...

  11. Normalizing Weather Data to Calculate Energy Savings Peer Exchange...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Normalizing Weather Data to Calculate Energy Savings Peer Exchange Call Normalizing Weather Data to Calculate Energy Savings Peer Exchange Call February 26, 2015 3:00PM to 4:3...

  12. Networking Call for Residential Network Members Peer Exchange...

    Energy Savers [EERE]

    Networking Call for Residential Network Members Peer Exchange Call Networking Call for Residential Network Members Peer Exchange Call March 12, 2015 12:30PM to 2:0...

  13. alkali ion exchange: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    many biological processes. In ion channels3 Guidoni, Leonardo 2 Spin-Exchange Optical Pumping with Alkali-Metal Vapors Physics Websites Summary: Spin-Exchange Optical Pumping with...

  14. Fouling of HVAC fin and tube heat exchangers

    E-Print Network [OSTI]

    Siegel, Jeffrey; Carey, Van P.

    2001-01-01T23:59:59.000Z

    air ? air ? part ? part FPI HVAC REFERENCES Anonymous, 1987,LBNL-47668 Fouling of HVAC Fin and Tube Heat ExchangersCIEE SPONSOR. FOULING OF HVAC FIN AND TUBE HEAT EXCHANGERS

  15. UNITED STATES NUCLEAR WASTE TECHNICAL REVIEW BOARD

    E-Print Network [OSTI]

    con144vf UNITED STATES NUCLEAR WASTE TECHNICAL REVIEW BOARD 2300 Clarendon Boulevard, Suite 1300 Dear Speaker Hastert, Senator Thurmond, and Secretary Richardson: The Nuclear Waste Technical Review with provisions of the Nuclear Waste Policy Amendments Act of 1987, Public Law 100-203. The Act requires the Board

  16. Appendix A Nuclear Waste Technical Review Board

    E-Print Network [OSTI]

    39 Appendices Appendices #12;Appendix A Nuclear Waste Technical Review Board Members: Curricula to the Nuclear Waste Technical Review Board. President Clinton appointed Dr. Cohon chairman on January 17, 1997, and Asia and on energy facility siting, including nuclear waste ship- ping and storage. In addition to his

  17. Appendix A Nuclear Waste Technical Review Board

    E-Print Network [OSTI]

    59 Appendices Appendices #12;Appendix A Nuclear Waste Technical Review Board Members: Curricula Cohon to serve on the Nuclear Waste Technical Review Board. President Clinton appointed Dr. Cohon, and Asia and on energy-facility siting, including nuclear waste shipping and storage. In addition to his

  18. UNITED STATES NUCLEAR WASTE TECHNICAL REVIEW BOARD

    E-Print Network [OSTI]

    UNITED STATES NUCLEAR WASTE TECHNICAL REVIEW BOARD 2300 Clarendon Boulevard, Suite 1300 Arlington.C. 20585 Dear Speaker Hastert, Senator Stevens, and Secretary Bodman: The Nuclear Waste Technical Review Board was created by Congress in the Nuclear Waste Policy Amendments Act (NWPAA) of 1987 and charged

  19. UNITED STATES NUCLEAR WASTE TECHNICAL REVIEW BOARD

    E-Print Network [OSTI]

    JEC187V3 UNITED STATES NUCLEAR WASTE TECHNICAL REVIEW BOARD 2300 Clarendon Boulevard, Suite 1300 of Energy 1000 Independence Avenue, SW Washington, DC 20585 Dear Secretary O'Leary: At the Nuclear Waste UNITED STATES NUCLEAR WASTE TECHNICAL REVIEW BOARD 2300 Clarendon Boulevard, Suite 1300 Arlington, VA

  20. UNITED STATES NUCLEAR WASTE TECHNICAL REVIEW BOARD

    E-Print Network [OSTI]

    UNITED STATES NUCLEAR WASTE TECHNICAL REVIEW BOARD 2300 Clarendon Boulevard, Suite 1300 Arlington Dear Speaker Pelosi, Senator Byrd, and Secretary Bodman: The Nuclear Waste Technical Review Board, and transporting high-level radioactive waste and spent nuclear fuel. The Board is required to report its findings

  1. Water Resources Center Annual Technical Report

    E-Print Network [OSTI]

    Inactivation of Microorganisms in Drinking Water using Ultraviolet (UV) Radiation and Residual Chlorine. DrWater Resources Center Annual Technical Report FY 2009 Water Resources Center Annual Technical Report FY 2009 1 #12;Introduction This is a report on the projects of the Rhode Island Water Resources

  2. UNITED STATES NUCLEAR WASTE TECHNICAL REVIEW BOARD

    E-Print Network [OSTI]

    of the overall system for managing spent fuel and defense high-level waste. The Board includes its findingsjlc029va UNITED STATES NUCLEAR WASTE TECHNICAL REVIEW BOARD 2300 Clarendon Boulevard, Suite 1300, D.C. 20585 Dear Speaker Gingrich, Senator Thurmond, and Secretary Peña: The Nuclear Waste Technical

  3. Water Resources Center Annual Technical Report

    E-Print Network [OSTI]

    Water Resources Center Annual Technical Report FY 2001 Introduction Three research projects were. The technical transfer project set up a RI Water Resources Center Website to allow easy access to the Center treatment devices, such as oil/sediment separators, that have been widely installed in urbanized areas have

  4. Arkansas Water Resources Center Annual Technical Report

    E-Print Network [OSTI]

    Arkansas Water Resources Center Annual Technical Report FY 2010 Arkansas Water Resources Center Annual Technical Report FY 2010 1 #12;Introduction The Arkansas Water Resources Center located at the University of Arkansas, Fayetteville, Arkansas is part of the network of 54 water institutes established

  5. Arkansas Water Resources Center Annual Technical Report

    E-Print Network [OSTI]

    Arkansas Water Resources Center Annual Technical Report FY 2011 Arkansas Water Resources Center Annual Technical Report FY 2011 1 #12;Introduction The Arkansas Water Resources Center located at the University of Arkansas at Fayetteville, is part of the network of 54 water institutes established

  6. Colorado Water Institute Annual Technical Report

    E-Print Network [OSTI]

    Colorado Water Institute Annual Technical Report FY 2012 Colorado Water Institute Annual Technical Report FY 2012 1 #12;Introduction Colorado Water Institute Annual Report for the period: March 1, 2012 ­ February 28, 2013 Water research is more pertinent than ever in Colorado. Whether the project explores

  7. Colorado Water Institute Annual Technical Report

    E-Print Network [OSTI]

    Colorado Water Institute Annual Technical Report FY 2011 Colorado Water Institute Annual Technical Report FY 2011 1 #12;Introduction Water research is more pertinent than ever in Colorado. Whether the project explores the effects of decentralized wastewater treatment systems on water quality, optimal

  8. Arkansas Water Resources Center Annual Technical Report

    E-Print Network [OSTI]

    Arkansas Water Resources Center Annual Technical Report FY 2013 Arkansas Water Resources Center Annual Technical Report FY 2013 1 #12;Introduction The Arkansas Water Resources Center is part of the network of 54 water institutes established by the Water Resources Research Act of 1964 and is located

  9. Arkansas Water Resources Center Annual Technical Report

    E-Print Network [OSTI]

    Arkansas Water Resources Center Annual Technical Report FY 2009 Arkansas Water Resources Center Annual Technical Report FY 2009 1 #12;Introduction The Arkansas Water Resources Center located at the University of Arkansas, Fayetteville, Arkansas is part of the network of 54 water institutes established

  10. Colorado Water Institute Annual Technical Report

    E-Print Network [OSTI]

    Colorado Water Institute Annual Technical Report FY 2013 Colorado Water Institute Annual Technical Report FY 2013 1 #12;Introduction Water research is more important than ever in Colorado. Whether the project explores the effects of decentralized wastewater treatment systems on water quality, optimal

  11. Colorado Water Institute Annual Technical Report

    E-Print Network [OSTI]

    Colorado Water Institute Annual Technical Report FY 2009 Colorado Water Institute Annual Technical Report FY 2009 1 #12;Introduction Water research is more pertinent than ever in Colorado. Whether the research explores the effects of decentralized wastewater treatment systems on water quality, optimal

  12. Water Resources Center Annual Technical Report

    E-Print Network [OSTI]

    Water Resources Center Annual Technical Report FY 2007 Water Resources Center Annual Technical Report FY 2007 1 #12;Introduction The Rhode Island Water Resources Center has supported one information transfer project, "Clean Drinking Water in Rhode Island" and one research project "Enhancing Drinking Water

  13. Iowa Water Center Annual Technical Report

    E-Print Network [OSTI]

    Iowa Water Center Annual Technical Report FY 2010 Iowa Water Center Annual Technical Report FY 2010 1 #12;Introduction The Iowa Water Center is a multi-campus and multi-organizational center focusing-institutional water research that can improve Iowa's water quality and provide adequate water supplies to meet both

  14. Iowa Water Center Annual Technical Report

    E-Print Network [OSTI]

    Iowa Water Center Annual Technical Report FY 2011 Iowa Water Center Annual Technical Report FY 2011 1 #12;Introduction The Iowa Water Center is a multi-campus and multi-organizational center focusing-institutional water research that can improve Iowa's water quality and provide adequate water supplies to meet both

  15. Iowa Water Center Annual Technical Report

    E-Print Network [OSTI]

    Iowa Water Center Annual Technical Report FY 2012 Iowa Water Center Annual Technical Report FY 2012 1 #12;Introduction The Iowa Water Center is a multi-campus and multi-organizational center focusing-institutional water research that can improve Iowa's water quality and provide adequate water supplies to meet both

  16. Colorado Water Institute Annual Technical Report

    E-Print Network [OSTI]

    Colorado Water Institute Annual Technical Report FY 2010 Colorado Water Institute Annual Technical Report FY 2010 1 #12;Introduction Water research is more pertinent than ever in Colorado. Whether the project explores the effects of decentralized wastewater treatment systems on water quality, optimal

  17. Managing Technical Risk: Understanding Private Sector

    E-Print Network [OSTI]

    action. Our study seeks to inform the decisions of both government managers and private entrepreneursApril 2000 Managing Technical Risk: Understanding Private Sector Decision Making on Early Stage 00-787 Managing Technical Risk Understanding Private Sector Decision Making on Early Stage Technology

  18. Water Resources Center Annual Technical Report

    E-Print Network [OSTI]

    , and nitrogen in non-conventional onsite wastewater treatment processes: a technical and economic analysis Basic treatment processes: a technical and economic analysis Project Number: 2002CA1B Start Date: 3/1/2002 End for the Onsite Treatment of Wastewater in California, Center for Water Resources Engineering, University

  19. Waste transfer leaks technical basis document

    SciTech Connect (OSTI)

    ZIMMERMAN, B.D.

    2003-03-22T23:59:59.000Z

    This document provides technical support for the onsite radiological and toxicological, and offsite toxicological, portions of the waste transfer leak accident presented in the Documented Safety Analysis. It provides the technical basis for frequency and consequence bin selection, and selection of safety SSCs and TSRs.

  20. Technical Report Documentation Page 1. Report No.

    E-Print Network [OSTI]

    Texas at Austin, University of

    Technical Report Documentation Page 1. Report No. FHWA/TX-05 / 0-4562-1 2.Government accession No and Friction Losses in Multi-Strand Post- Tensioning Tendons Including the Effects of Emulsifiable Oils 6 Austin, TX 78705-2650 11. Contract or Grant No. 0-4562 13. Type of Report and Period Covered Technical