National Library of Energy BETA

Sample records for technical exchange atlanta

  1. 2011 PERFORMANCE ASSESSMENT COMMUNITY OF PRACTICE TECHNICAL EXCHANGE - SUMMARY

    SciTech Connect (OSTI)

    Seitz, R.

    2011-12-30

    The Performance Assessment Community of Practice (PA CoP) was developed in 2008 to improve consistency and quality in the preparation of performance assessments (PAs) and risk assessments across the Department of Energy (DOE) Complex. The term, PA, is used to represent all of these modeling applications in this report. The PA CoP goals are to foster the exchange of information among PA practitioners and to share lessons learned from PAs conducted for DOE, commercial disposal facilities, and international entities. Technical exchanges and workshops are a cornerstone of PA CoP activities. Previous technical exchanges have addressed Engineered Barriers (2009 - http://www.cresp.org/education/workshops/pacop/), the Advanced Simulation Capability for Environmental Management and the Cementitious Barriers Partnership (2010 - http://srnl.doe.gov/copexchange/links.htm). Each technical exchange also includes summary presentations regarding activities at DOE, the Nuclear Regulatory Commission (NRC) and other organizations (e.g., International Atomic Energy Agency (IAEA)) as well as a number of presentations from selected sites to provide insight and perspective from on-going modeling activities. Through the deployment of PA Assistance Teams, the PA CoP has also been engaged in the development of new PAs across the DOE Complex. As a way of improving consistency in the preparation of new PAs, the teams provide technical advice and share experiences, noteworthy practices, and lessons learned from previous Low-Level Waste Disposal Facility Federal Review Group (LFRG) reviews. Teams have provided support for PAs at Hanford, Idaho, Paducah and Portsmouth. The third annual PA CoP Technical Exchange was held on May 25-26, 2011 in Atlanta, GA. The PA CoP Steering Committee Meeting held its first meeting on May 24 prior to the Technical Exchange. Decision making using models and software quality assurance were the topical emphasis for the exchange. A new feature at the 2011 technical exchange was the use of panel discussions to solicit feedback from regulators and practitioners. This report summarizes discussions and recommendations from the steering committee meeting and presentations and feedback obtained at the technical exchange. Appendix I includes the steering committee meeting agenda and Appendix II includes the agenda for the technical exchange and a screenshot of the presentations and video files that are available online.

  2. Sandia National Laboratories: Malware Technical Exchange Meeting (MTEM)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2014 2014 Malware Technical Exchange Meeting Facebook Twitter YouTube Flickr RSS Top 2014 Malware Technical Exchange Meeting Technical Program Committee Members Registration Hotels in Albuquerque Program Agenda 2014 Malware Technical Exchange Meeting Malware Technical Exchange Meeting (MTEM) 2014 Evolving Adversaries: Stories From the Field About the General Session The 2014 Malware Technical Exchange Meeting will take place July 22-24, 2014 on Kirtland Air Force Base in Albuquerque, NM. The

  3. 2015 Annual Technical Exchange Meeting Presenters Biographical Sketches |

    Office of Environmental Management (EM)

    Department of Energy Annual Technical Exchange Meeting Presenters Biographical Sketches 2015 Annual Technical Exchange Meeting Presenters Biographical Sketches Interagency Performance & Risk Assessment Community of Practice (P&RA CoP) 2015 Annual Technical Exchange Meeting Presenters Biographical Sketches PDF icon 2015 Annual Technical Exchange Meeting Presenters Biographical Sketches More Documents & Publications Biosketches of Speakers - P&RA CoP December 2014 Technical

  4. Technical Information Exchange on Pyrolysis Oil: Potential for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    renewable heating oil substitution Technical Information Exchange on Pyrolysis Oil: Potential for a renewable heating oil substitution Two-day agenda from the workshop: Technical ...

  5. December 15-16, 2015 - Technical Exchange Meeting - Richland, Washington |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy December 15-16, 2015 - Technical Exchange Meeting - Richland, Washington December 15-16, 2015 - Technical Exchange Meeting - Richland, Washington Annual Technical Exchange Meeting, December 15 and 16, 2015, Washington State Department of Ecology Offices, Richland, WA. Theme: Interpretation of Performance and Risk Assessment Results. Optional Tour of the Hanford Site for registered participants of the Technical Exchange Meeting, December 17, 2015. Contact

  6. Technical Information Exchange on Pyrolysis Oil: Potential for a renewable

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    heating oil substitution | Department of Energy renewable heating oil substitution Technical Information Exchange on Pyrolysis Oil: Potential for a renewable heating oil substitution Two-day agenda from the workshop: Technical Information Exchange on Pyrolysis Oil: Potential for a renewable heating oil substitution fuel in New England. PDF icon pyrolysis_oil_agenda.pdf More Documents & Publications Technical Information Exchange on Pyrolysis Oil: Potential for a Renewab;e Heating Oil

  7. December 15-16, 2015 - Technical Exchange Meeting - Richland...

    Broader source: Energy.gov (indexed) [DOE]

    Technical Exchange Meeting, December 15 and 16, 2015, Washington State Department of Ecology Offices, Richland, WA. Theme: Interpretation of Performance and Risk Assessment...

  8. External Technical Review Report for Small Column Ion Exchange Technology

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    at Savannah River Site | Department of Energy Report for Small Column Ion Exchange Technology at Savannah River Site External Technical Review Report for Small Column Ion Exchange Technology at Savannah River Site Full Document and Summary Versions are available for download PDF icon External Technical Review Report for Small Column Ion Exchange Technology at Savannah River Site PDF icon Summary - Small Column Ion Exchange (SCIX)Technology at the SRS More Documents & Publications

  9. USD E'16 ATLANTA

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    USD E'16 ATLANTA 2016 REGISTER NOW! 15th Annual DOE Small Business Forum & Expo MAY 23 - 25, 2016 Atlanta Marriott Marquis 265 Peachtree Center Avenue Atlanta, GA 30303 Government per diem $135.00/night (+taxes/fees) Register Now for USDOE16! smallbusinessconference.energy.gov CLICK HERE TO REGISTER

  10. Technical Exchange and Cooperation Agreement between the Department of

    Energy Savers [EERE]

    Energy and the European Atomic Energy Community | Department of Energy Technical Exchange and Cooperation Agreement between the Department of Energy and the European Atomic Energy Community Technical Exchange and Cooperation Agreement between the Department of Energy and the European Atomic Energy Community The objective of this technical arrangement is to establish a framework for co-operation between the Parties in the field of nuclear-related technology research and development based upon

  11. Attendees - December 15-16, 2015 P&RA Technical Exchange Meeting...

    Office of Environmental Management (EM)

    15-16, 2015 P&RA Technical Exchange Meeting Attendees - December 15-16, 2015 P&RA Technical Exchange Meeting Attendees to the December 15-16, 2015 P&RA Technical Exchange Meeting....

  12. Technical Information Exchange on Pyrolysis Oil: Potential for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Renewab;e Heating Oil Substation Fuel in New England Technical Information Exchange on Pyrolysis Oil: Potential for a Renewab;e Heating Oil Substation Fuel in New England This ...

  13. Atlanta Chemical Engineering LLC | Open Energy Information

    Open Energy Info (EERE)

    Atlanta Chemical Engineering LLC Jump to: navigation, search Logo: Atlanta Chemical Engineering LLC Name: Atlanta Chemical Engineering LLC Place: Marietta, Georgia Country: United...

  14. Sandia National Laboratories: MTEM 2014: Malware Technical Exchange

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Meeting: Registration Registration As in years past, MTEM 2014 will be held at the SECRET//NOFORN level. Attendees will be charged a registration fee of $50.00 USD with an option to purchase boxed meals for $10 each for the first two days. To reserve your spot at the conference please register: Register The Event Name which you will be required to select is "Malware Technical Exchange Meeting 2014". The deadline for registration is July 11, 2014. Instructions on how to pass

  15. Making Connections for Atlanta Students

    Broader source: Energy.gov [DOE]

    The Atlanta Students in Energy and Climate Forum, held in April 2013, brought together entrepreneurs, and professors to share experiences and motivations in their pursuit of environmental stewardship.

  16. Agenda for the December 15-16, 2015 - Technical Exchange Meeting -

    Office of Environmental Management (EM)

    Richland, Washington | Department of Energy Agenda for the December 15-16, 2015 - Technical Exchange Meeting - Richland, Washington Agenda for the December 15-16, 2015 - Technical Exchange Meeting - Richland, Washington Final Agenda Interagency Steering Committee on Performance and Risk Assessment Community of Practice Annual Technical Exchange Meeting December 15 and 16, 2015 Washington State Department of Ecology Offices 3100 Port of Benton Blvd., Richland, WA 99354 Phone: 509-372-7950

  17. December 11-12, 2014 - Technical Exchange Meeting - Las Vegas, Nevada |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 1-12, 2014 - Technical Exchange Meeting - Las Vegas, Nevada December 11-12, 2014 - Technical Exchange Meeting - Las Vegas, Nevada On December 11-12, 2014, the Depart of Energy (DOE) Office of Environmental Management, along with the U.S. Environmental Protection Agency (EPA), U.S. Nuclear Regulatory Commission (NRC), Washington State Department of Ecology, and Commonwealth of Kentucky, conducted the Annual Technical Exchange for the Interagency Steering Committee on

  18. Atlanta, Georgia: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Solarity Sustainable World Capital TCE Energy Corporation Waspa Wheego Electric Cars Energy Incentives for Atlanta, Georgia City of Atlanta - Sustainable Home Initiative in...

  19. Attendees - December 2014 P&RA Technical Exchange Meeting | Department of

    Office of Environmental Management (EM)

    Energy 2014 P&RA Technical Exchange Meeting Attendees - December 2014 P&RA Technical Exchange Meeting Attendees to the Performance & Risk Assessment Community of Practice (P&RA) Technical Exchange Meeting held in Las Vegas, Nevada on December 11 & 12, 2014 PDF icon Attendees More Documents & Publications Attendees - December 15-16, 2015 P&RA Technical Exchange Meeting Status Updates on the Performance and Risk Assessment Community of Practice (P&RA CoP)

  20. Agenda- Interagency Steering Committee on Performance and Risk Assessment Community of Practice Annual Technical Exchange Meeting

    Broader source: Energy.gov [DOE]

    Final Agenda for the December, 2014 Interagency Steering Committee on Performance and Risk Assessment Community of Practice Annual Technical Exchange Meeting held in Las Vegas, Nevada.

  1. Advancing Residential Retrofits in Atlanta

    SciTech Connect (OSTI)

    Jackson, Roderick K; Kim, Eyu-Jin; Roberts, Sydney; Stephenson, Robert

    2012-07-01

    This report will summarize the home energy improvements performed in the Atlanta, GA area. In total, nine homes were retrofitted with eight of the homes having predicted source energy savings of approximately 30% or greater based on simulated energy consumption.

  2. TECHNICAL COMPARISON OF CANDIDATE ION EXCHANGE MEDIA FOR SMALL COLUMN ION EXCHANGE (SCIX) APPLICATIONS IN SUPPORT OF SUPPLEMENTAL LAW PRETREATMENT

    SciTech Connect (OSTI)

    RAMSEY AA; THORSON MR

    2010-12-28

    At-tank supplemental pretreatment including both filtration and small column ion exchange is currently under evaluation to facilitate salt waste retrieval and processing in the Hanford tank farms. Spherical resorcinol formaldehyde (sRF) resin is the baseline ion exchange resin for use in the Waste Treatment and Immobilization Plant (WTP). This document provides background and technical rationale to assist in determining whether spherical resorcinol formaldehyde (sRF) is also the appropriate ion exchange resin for supplemental LAW pretreatment processes and compares sRF with crystalline silicotitanate (CST) as potential supplemental pretreatment ion exchange media.

  3. Biosketches of Speakers- P&RA CoP December 2014 Technical Exchange Meeting

    Broader source: Energy.gov [DOE]

    Bio-sketches of Speakers from the Performance & Risk Assessment Community of Practice (P&RA) Technical Exchange Meeting held in Las Vegas, Nevada on December 11 & 12, 2014.

  4. Technical Information Exchange on Pyrolysis Oil: Potential for a Renewab;e

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Heating Oil Substation Fuel in New England | Department of Energy Renewab;e Heating Oil Substation Fuel in New England Technical Information Exchange on Pyrolysis Oil: Potential for a Renewab;e Heating Oil Substation Fuel in New England This report summarizes the results of an information exchange sponsored by the DOE/EERE Bioenergy Technologies Office in Manchester, New Hampshire, on May 9-10, 2012. The participand identifies top challenges regarding feedstocks and production, logistics and

  5. Alternative Fuels Data Center: Atlanta Airport Converts Shuttles to CNG

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Atlanta Airport Converts Shuttles to CNG to someone by E-mail Share Alternative Fuels Data Center: Atlanta Airport Converts Shuttles to CNG on Facebook Tweet about Alternative Fuels Data Center: Atlanta Airport Converts Shuttles to CNG on Twitter Bookmark Alternative Fuels Data Center: Atlanta Airport Converts Shuttles to CNG on Google Bookmark Alternative Fuels Data Center: Atlanta Airport Converts Shuttles to CNG on Delicious Rank Alternative Fuels Data Center: Atlanta Airport Converts

  6. EECBG Success Story: Atlanta Suburb Greases the Path to Savings...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Atlanta Suburb Greases the Path to Savings with Biodiesel EECBG Success Story: Atlanta ... of the City of Savannah, GA. EECBG Success Story: In Savannah, Georgia, Even the ...

  7. Advanced Small Modular Reactor (SMR) Probabilistic Risk Assessment (PRA) Technical Exchange Meeting

    SciTech Connect (OSTI)

    Curtis Smith

    2013-09-01

    During FY13, the INL developed an advanced SMR PRA framework which has been described in the report Small Modular Reactor (SMR) Probabilistic Risk Assessment (PRA) Detailed Technical Framework Specification, INL/EXT-13-28974 (April 2013). In this framework, the various areas are considered: Probabilistic models to provide information specific to advanced SMRs Representation of specific SMR design issues such as having co-located modules and passive safety features Use of modern open-source and readily available analysis methods Internal and external events resulting in impacts to safety All-hazards considerations Methods to support the identification of design vulnerabilities Mechanistic and probabilistic data needs to support modeling and tools In order to describe this framework more fully and obtain feedback on the proposed approaches, the INL hosted a technical exchange meeting during August 2013. This report describes the outcomes of that meeting.

  8. Archive Reference Buildings by Climate Zone: 3A Atlanta, Georgia...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Archive Reference Buildings by Climate Zone: 3A Atlanta, Georgia Archive Reference Buildings by Climate Zone: 3A Atlanta, Georgia Here you will find past versions of the reference ...

  9. Workplace Charging Challenge Partner: City of Atlanta | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Atlanta Workplace Charging Challenge Partner: City of Atlanta Workplace Charging Challenge Partner: City of Atlanta The City of Atlanta's provision of workplace charging builds upon a larger strategy to improve transportation in the region and provide sustainable transportation options. The first component focuses on increasing the adoption of alternative transportation methods including walking, biking, public transportation, car-sharing, and alternative workplace strategies such as

  10. Clark Atlanta Universities (CAU) Energy Related Research Capabilities |

    Office of Environmental Management (EM)

    Department of Energy Clark Atlanta Universities (CAU) Energy Related Research Capabilities Clark Atlanta Universities (CAU) Energy Related Research Capabilities How energy related research has helped Clark Atlanta University. PDF icon Clark Atlanta Universities (CAU) Energy Related Research Capabilities More Documents & Publications 2008-2009 Winter Fuels Outlook Conference Ronald Reagan Building and International Trade Center HYDROGEN AND FUEL CELL EDUCATION AT CALIFORNIA STATE

  11. City of Atlanta Video (Text Version) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Atlanta Video (Text Version) City of Atlanta Video (Text Version) Aaron Bastian: According to the U.S. EPA, Atlanta is one of the top ten cities in the country for green buildings. It is a city that is walk and bike friendly, and now Atlanta is second in the country for the sale of electric vehicles. Atlanta has seen tremendous adoption of plug-in electric vehicles amongst her residents, but to truly meet driver demand, chargers must be both accessible and available at major destinations such as

  12. Clark Atlanta Universities (CAU) Energy Related Research Capabilities...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon Clark Atlanta Universities (CAU) Energy Related Research Capabilities More ... CALIFORNIA STATE UNIVERSITY, LOS ANGELES GATE Center for Automotive Fuel Cell Systems at ...

  13. Meeting Materials: Consent-Based Siting Public Meeting in Atlanta...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Department will host a public meeting on consent-based siting on April 11th in Atlanta ... in turn serve as a framework for working with potential host communities in the future. ...

  14. 2009 National Electric Transmission Congestion Study- Atlanta Workshop

    Broader source: Energy.gov [DOE]

    On July 29, 2008, DOE hosted a regional pre-study workshop in Atlanta, GA to receive input and suggestions concerning the 2009 National Electric Transmission Congestion Study. The agenda and full...

  15. WNRC diverting to Atlanta FRC | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    PDF icon NOTICE - NARA Diversion Prgm re WNRC Transfers Routed to FRC-Atlanta, GA.pdf More Documents & Publications Denver FRC diverting to Kingsridge FRC (Dayton, OH) POINT OF CONTACT RESPONSIBILITIES FOR RECORDS MANAGEMENT Records Management POC Responsibilities

  16. Eleventh ARM Science Team Meeting Proceedings, Atlanta, Georgia...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2001). 1 Eleventh ARM Science Team Meeting Proceedings, Atlanta, Georgia, March 19-23, 2001 From 1997 to 2001, ground-based remote sensing of thick clouds was performed at...

  17. Microsoft Word - Final TEC Notes Atlanta 07.doc

    Office of Environmental Management (EM)

    TRANSPORTATION EXTERNAL COORDINATION WORKING GROUP MEETING January 31-February 1, 2007 Atlanta, Georgia Welcome and Meeting Overview The U.S. Department of Energy (DOE), Transportation External Coordination Working Group (TEC) held its 27th meeting on January 31-February 1, 2007, in Atlanta, Georgia. One hundred thirteen participants, representing national, State, Tribal, and local government; industry; professional organizations; and other interested parties, met to address a variety of issues

  18. Atlanta TEC Meeting -- Tribal Group Summary 3-6-07

    Office of Environmental Management (EM)

    Atlanta, GA - January 31, 2007 Session Chaired by: Jay Jones (DOE, Office of Civilian Radioactive Waste Management, OCRWM) Regular Members in Attendance: Kenny Anderson (Las Vegas Paiute Tribe), Richard Arnold (Las Vegas Indian Center/Pahrump Paiute Tribe), Tony Boyd (Pueblo of Acoma), Rob Burnside (Confederated Tribes of the Umatilla Indian Reservation, CTUIR), Floyd Chaney (Mohegan Tribe), Sandra Covi (Union Pacific Railroad), Martha Crosland (DOE/Office of General Counsel, GC), Kristen Ellis

  19. Meeting Materials: Consent-Based Siting Public Meeting in Atlanta (April

    Energy Savers [EERE]

    11, 2016) | Department of Energy Meeting Materials: Consent-Based Siting Public Meeting in Atlanta (April 11, 2016) Meeting Materials: Consent-Based Siting Public Meeting in Atlanta (April 11, 2016) The Department will host a public meeting on consent-based siting on April 11th in Atlanta at the Georgia Institute of Technology Conference Center. The meeting will include a presentation by John Kotek, Acting Assistant Secretary for Nuclear Energy at the Department of Energy; a speaker panel

  20. Better Buildings Challenge, Atlanta Nears Halfway Mark in Meeting Citywide Goal of 20% Energy Savings

    Broader source: Energy.gov [DOE]

    The Energy Department yesterday recognized Atlanta for its progress and leadership in meeting a citywide goal to improve the energy performance of its buildings by 20% by 2020.

  1. U.S.-MEXICO TECHNOLOGY TRANSFER; BILATERAL TECHNICAL EXCHANGES FOR SUSTAINABLE ECONOMIC GROWTH IN THE BORDER REGION

    SciTech Connect (OSTI)

    Jimenez, Richard, D., Dr.

    2007-10-01

    The U.S. Department of Energy (DOE) maintains a strong commitment to transfer the results of its science and technology programs to the private sector. The intent is to apply innovative and sometimes advanced technologies to address needs while simultaneously stimulating new commercial business opportunities. Such focused “technology transfer” was evident in the late 1990s as the results of DOE investments in environmental management technology development led to new tools for characterizing and remediating contaminated sites as well as handling and minimizing the generation of hazardous wastes. The Department’s Office of Environmental Management was attempting to reduce the cost, accelerate the schedule, and improve the efficacy of clean-up efforts in the nuclear weapons complex. It recognized that resulting technologies had broader world market applications and that their commercialization would further reduce costs and facilitate deployment of improved technology at DOE sites. DOE’s Albuquerque Operations Office (now part of the National Nuclear Security Administration) began in 1995 to build the foundation for a technology exchange program with Mexico. Initial sponsorship for this work was provided by the Department’s Office of Environmental Management. As part of this effort, Applied Sciences Laboratory, Inc. (ASL) was contracted by the DOE Albuquerque office to identify Mexico’s priority environmental management needs, identify and evaluate DOE-sponsored technologies as potential solutions for those needs, and coordinate these opportunities with decision makers from Mexico’s federal government. That work led to an improved understanding of many key environmental challenges that Mexico faces and the many opportunities to apply DOE’s technologies to help resolve them. The above results constituted, in large part, the foundation for an initial DOE-funded program to apply the Department’s technology base to help address some of Mexico’s challenging environmental issues. The results also brought focus to the potential contributions that DOE’s science and technology could make for solving the many difficult, multi-generational problems faced by hundreds of bi-national communities along the 2,000-mile shared border of the United States and Mexico. Efforts to address these U.S.-Mexico border issues were initially sponsored by the DOE’s Albuquerque and Carlsbad offices. In subsequent years, the U.S. Congress directed appropriations to DOE’s Carlsbad office to address public health, safety and security issues prevalent within U.S.-Mexico border communities. With ASL’s assistance, DOE’s Albuquerque office developed contacts and formed partnerships with interested U.S and Mexican government, academic, and commercial organizations. Border industries, industrial effluents, and public health conditions were evaluated and documented. Relevant technologies were then matched to environmental problem sets along the border. Several technologies that were identified and subsequently supported by this effort are now operational in a number of U.S.-Mexico border communities, several communities within Mexico’s interior states, and in other parts of Latin America. As a result, some serious public health threats within these communities caused by exposure to toxic airborne pollutants have been reduced. During this time, DOE’s Carlsbad office hosted a bilateral conference to establish a cross-border consensus on what should be done on the basis of these earlier investigative efforts. Participating border region stakeholders set an agenda for technical collaborations. This agenda was supported by several Members of Congress who provided appropriations and directed DOE’s Carlsbad office to initiate technology demonstration projects. During the following two years, more than 12 private-sector and DOE-sponsored technologies were demonstrated in partnership with numerous border community stakeholders. All technologies were well received and their effectiveness at addressing health, safety and security issues w

  2. Registration Open for National Environmental Justice Advisory Council (NEJAC) Public Meeting, September 11-12, 2013, Atlanta, Georgia

    Broader source: Energy.gov [DOE]

    Registration Open for National Environmental Justice Advisory Council (NEJAC) Public Meeting, September 11-12, 2013, Atlanta, Georgia.

  3. Capture and isotopic exchange method for water and hydrogen isotopes on zeolite catalysts up to technical scale for pre-study of processing highly tritiated water

    SciTech Connect (OSTI)

    Michling, R.; Braun, A.; Cristescu, I.; Dittrich, H.; Gramlich, N.; Lohr, N.; Glugla, M.; Shu, W.; Willms, S.

    2015-03-15

    Highly tritiated water (HTW) may be generated at ITER by various processes and, due to the excessive radio toxicity, the self-radiolysis and the exceedingly corrosive property of HTW, a potential hazard is associated with its storage and process. Therefore, the capture and exchange method for HTW utilizing Molecular Sieve Beds (MSB) was investigated in view of adsorption capacity, isotopic exchange performance and process parameters. For the MSB, different types of zeolite were selected. All zeolite materials were additionally coated with platinum. The following work comprised the selection of the most efficient zeolite candidate based on detailed parametric studies during the H{sub 2}/D{sub 2}O laboratory scale exchange experiments (about 25 g zeolite per bed) at the Tritium Laboratory Karlsruhe (TLK). For the zeolite, characterization analytical techniques such as Infrared Spectroscopy, Thermogravimetry and online mass spectrometry were implemented. Followed by further investigation of the selected zeolite catalyst under full technical operation, a MSB (about 22 kg zeolite) was processed with hydrogen flow rates up to 60 mol*h{sup -1} and deuterated water loads up to 1.6 kg in view of later ITER processing of arising HTW. (authors)

  4. DeKalb County/Metropolitan Atlanta Alternative Fuel and Advanced...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    60tifrancis2012o.pdf More Documents & Publications DeKalb CountyMetropolitan Atlanta Alternative Fuel and Advanced Technology Vehicle Project DeKalb CountyMetropolitan...

  5. DeKalb County/Metropolitan Atlanta Alternative Fuel and Advanced...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    vt060francis2010p.pdf More Documents & Publications DeKalb CountyMetropolitan Atlanta Alternative Fuel and Advanced Technology Vehicle Project DeKalb CountyMetropolitan...

  6. DeKalb County/Metropolitan Atlanta Alternative Fuel and Advanced...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    60tifrancis2011p.pdf More Documents & Publications DeKalb CountyMetropolitan Atlanta Alternative Fuel and Advanced Technology Vehicle Project DeKalb CountyMetropolitan...

  7. EECBG Success Story: Atlanta Suburb Greases the Path to Savings with

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Biodiesel | Department of Energy Atlanta Suburb Greases the Path to Savings with Biodiesel EECBG Success Story: Atlanta Suburb Greases the Path to Savings with Biodiesel December 7, 2011 - 3:33pm Addthis Downtown Smyrna, Georgia, a town that's poised to see big savings thanks to their investment in biodiesel. | Photo by Ken Cook Downtown Smyrna, Georgia, a town that's poised to see big savings thanks to their investment in biodiesel. | Photo by Ken Cook Downtown Smyrna, Georgia is using

  8. DeKalb County/Metropolitan Atlanta Alternative Fuel and Advanced Technology

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicle Project | Department of Energy 2 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting PDF icon arravt060_ti_francis_2012_o.pdf More Documents & Publications DeKalb County/Metropolitan Atlanta Alternative Fuel and Advanced Technology Vehicle Project DeKalb County/Metropolitan Atlanta Alternative Fuel and Advanced Technology Vehicle Project Puget Sound Clean Cities Petroleum Reduction Project

  9. DeKalb County/Metropolitan Atlanta Alternative Fuel and Advanced Technology

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicle Project | Department of Energy 1 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation PDF icon arravt060_ti_francis_2011_p.pdf More Documents & Publications DeKalb County/Metropolitan Atlanta Alternative Fuel and Advanced Technology Vehicle Project DeKalb County/Metropolitan Atlanta Alternative Fuel and Advanced Technology Vehicle Project Clean Cities 2009 Petroleum Displacement Awards

  10. DeKalb County/Metropolitan Atlanta Alternative Fuel and Advanced Technology

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicle Project | Department of Energy 0 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. PDF icon tiarravt060_francis_2010_p.pdf More Documents & Publications DeKalb County/Metropolitan Atlanta Alternative Fuel and Advanced Technology Vehicle Project DeKalb County/Metropolitan Atlanta Alternative Fuel and Advanced Technology Vehicle Project Clean Cities Recovery Act: Vehicle & Infrastructure Deployment

  11. Building Efficiency Technologies by Tomorrow's Engineers and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Heat Exchangers, AL - Advanced Renewable Energy - Emrgy Hydro - Atlanta, GA - Fox Theater - Atlanta, GA - Atlanta BeltLine - Atlanta, GA - Ford - Atlanta, GA - SawHorse - ...

  12. Secretary Moniz's Keynote at the Sam Nunn Policy Forum in Atlanta, GA --

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    As Delivered | Department of Energy Keynote at the Sam Nunn Policy Forum in Atlanta, GA -- As Delivered Secretary Moniz's Keynote at the Sam Nunn Policy Forum in Atlanta, GA -- As Delivered April 16, 2014 - 11:35am Addthis Dr. Ernest Moniz Dr. Ernest Moniz Secretary of Energy Well, thank you. Professor Bankoff, Provost Bras, I'll also acknowledge the Bank of America support of this symposium and also my monthly support of the Bank of America which is quite considerable with those credit

  13. Summary of Needs and Opportunities from the 2011 Residential Energy Efficiency Stakeholders Meeting: Atlanta, Georgia -- March 16-18, 2011

    SciTech Connect (OSTI)

    Not Available

    2011-05-01

    This summary report outlines needs and issues for increasing energy efficiency of new and existing U.S homes, as identified at the U.S Department of Energy Building America program Spring 2011 stakeholder meeting in Atlanta, Georgia.

  14. Remarks by Federal Blue Ribbon Commission J. David Jameson Atlanta, GA

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Federal Blue Ribbon Commission J. David Jameson Atlanta, GA October 18, 2011 Good Morning. I am David Jameson. I am President and CEO of the Greater Aiken, South Carolina, Chamber of Commerce. I am here today in my capacity as current Chairman of the SRS Community Reuse Organization. The SRSCRO is a non-profit regional group supporting economic diversification and job creation in a five-county in Georgia and South Carolina near the Department of Energy's Savannah River Site. We are unique among

  15. OSH technical reference manual

    SciTech Connect (OSTI)

    Not Available

    1993-11-01

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  16. Atlanta Survey

    U.S. Energy Information Administration (EIA) Indexed Site

    Number of Fleets . . . . . . . . . . . . . . . 3,589 2,569 651 369 SIC Codes Ag.For.Fish. . . . . . . . . . . . . . . . . 140 65 31 Q Mining . . . . . . . . . . . . . . . . . ....

  17. Technical Standards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Review for Technical Standards of Interest Legend: Red Technical Standards Program Activities and Responsibilities Blue Directives Program Activities and Responsibilities...

  18. Mechanical Engineering Department Technical Review

    SciTech Connect (OSTI)

    Carr, R.B.; Denney, R.M.

    1981-07-01

    The Mechanical Engineering Department Technical Review is published to inform readers of various technical activities within the Department, promote exchange of ideas, and give credit to personnel who are achieving the results. The report is presented in two parts: technical achievements and publication abstracts. The first is divided into seven sections, each of which reports on an engineering division and its specific activities related to nuclear tests, nuclear explosives, weapons, energy systems, engineering sciences, magnetic fusion, and materials fabrication.

  19. Mechanical Engineering Department technical abstracts

    SciTech Connect (OSTI)

    Denney, R.M.

    1982-07-01

    The Mechanical Engineering Department publishes listings of technical abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). Overall information about current activities of each of the Department's seven divisions precedes the technical abstracts.

  20. Mechanical engineering department technical review

    SciTech Connect (OSTI)

    Carr, R.B. Denney, R.M.

    1981-01-01

    The Mechanical Engineering Department Technical Review is published to: (1) inform the readers of various technical activities within the department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical acievements and publication abstracts. The first is divided into eight sections, one for each division in the department providing the reader with the names of the personnel and the division accomplishing the work.

  1. Summary of Needs and Opportunities from the 2011 Residential Energy Efficiency Stakeholders Meeting: Atlanta, Georgia -- March 16-18, 2011

    Energy Savers [EERE]

    Needs and Opportunities from the 2011 Residential Energy Efficiency Stakeholders Meeting Atlanta, Georgia - March 16-18, 2011 May 2011 ii NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information,

  2. Technical Guidance

    Broader source: Energy.gov [DOE]

    The Office of Technical Guidance, within the Office of Health, Safety and Security develops and issues Government-wide and Department-wide technical guidance to ensure that classified nuclear...

  3. The SEP/EECBG Technical Assistance Program

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The SEP/EECBG Technical Assistance Program STEAB - Washington, D.C. June 7, 2011 Pam Bloch Mendelson, DOE Lead , Technical Assistance Program eere.energy.gov Agenda * Goals and Priorities * TAP by the Numbers * Solution Center and Resources - Local * Peer to Peer Exchange * Policy Toolkits * Community Energy Strategic Planning - State * Peer to Peer Exchange * Energy Service Performance Contracting * Private Finance eere.energy.gov TAP Goals & Objectives Goal: To provide SEP & EECBG

  4. Technical information

    Gasoline and Diesel Fuel Update (EIA)

    Home> Commercial Buildings Home> Technical Information > Estimation of Standard Errors Estimation of Standard Errors Sampling error is the difference between the survey estimate...

  5. Small Column Ion Exchange at Savannah River Site Technology Readiness

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Assessment Report | Department of Energy Small Column Ion Exchange at Savannah River Site Technology Readiness Assessment Report Small Column Ion Exchange at Savannah River Site Technology Readiness Assessment Report PDF icon Small Column Ion Exchange at Savannah River Site Technology Readiness Assessment Report More Documents & Publications Small Column Ion Exchange Technology at Savannah River Site Compilation of TRA Summaries External Technical Review Report for Small Column Ion

  6. OSTI, US Dept of Energy, Office of Scientific and Technical Information |

    Office of Scientific and Technical Information (OSTI)

    Speeding access to science information from DOE and Beyond Transparency in Government and Transformative Science by Dr. Jeffrey Salmon on Mon, May 4, 2009 I recently had the opportunity to speak with members of DOE's Scientific and Technical Information Program (STIP) at their annual meeting in Atlanta, Georgia. This is a collaboration that works and is critical to OSTI's success. It is supported by a DOE Order, but there is no compulsion in the order. This is an "order" only

  7. Heat exchanger

    DOE Patents [OSTI]

    Brackenbury, P.J.

    1983-12-08

    A heat exchanger comparising a shell attached at its open end to one side of a tube sheet and a detachable head connected to the other side of said tube sheet. The head is divided into a first and second chamber in fluid communication with a nozzle inlet and nozzle outlet, respectively, formed in said tube sheet. A tube bundle is mounted within said shell and is provided with inlets and outlets formed in said tube sheet in communication with said first and second chambers, respectively.

  8. Heat exchanger

    DOE Patents [OSTI]

    Brackenbury, Phillip J.

    1986-01-01

    A heat exchanger comparising a shell attached at its open end to one side of a tube sheet and a detachable head connected to the other side of said tube sheet. The head is divided into a first and second chamber in fluid communication with a nozzle inlet and nozzle outlet, respectively, formed in said tube sheet. A tube bundle is mounted within said shell and is provided with inlets and outlets formed in said tube sheet in communication with said first and second chambers, respectively.

  9. Urban airshed modeling of air quality impacts of alternative transportation fuel use in Los Angeles and Atlanta

    SciTech Connect (OSTI)

    NONE

    1997-12-01

    The main objective of NREL in supporting this study is to determine the relative air quality impact of the use of compressed natural gas (CNG) as an alternative transportation fuel when compared to low Reid vapor pressure (RVP) gasoline and reformulated gasoline (RFG). A table lists the criteria, air toxic, and greenhouse gas pollutants for which emissions were estimated for the alternative fuel scenarios. Air quality impacts were then estimated by performing photochemical modeling of the alternative fuel scenarios using the Urban Airshed Model Version 6.21 and the Carbon Bond Mechanism Version IV (CBM-IV) (Geary et al., 1988) Using this model, the authors examined the formation and transport of ozone under alternative fuel strategies for motor vehicle transportation sources for the year 2007. Photochemical modeling was performed for modeling domains in Los Angeles, California, and Atlanta, Georgia.

  10. Building America Case Study: Ground Source Heat Pump Research, TaC Studios Residence, Atlanta, Georigia (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-09-01

    As part of the NAHB Research Center Industry Partnership, Southface partnered with TaC Studios, an Atlanta based architecture firm specializing in residential and light commercial design, on the construction of a new test home in Atlanta, GA in the mixed-humid climate. This home serves as a residence and home office for the firm's owners, as well as a demonstration of their design approach to potential and current clients. Southface believes the home demonstrates current best practices for the mixed-humid climate, including a building envelope featuring advanced air sealing details and low density spray foam insulation, glazing that exceeds ENERGY STAR requirements, and a high performance heating and cooling system. Construction quality and execution was a high priority for TaC Studios and was ensured by a third party review process. Post construction testing showed that the project met stated goals for envelope performance, an air infiltration rate of 2.15 ACH50. The homeowner's wished to further validate whole house energy savings through the project's involvement with Building America and this long-term monitoring effort. As a Building America test home, this home was evaluated to detail whole house energy use, end use loads, and the efficiency and operation of the ground source heat pump and associated systems. Given that the home includes many non-typical end use loads including a home office, pool, landscape water feature, and other luxury features not accounted for in Building America modeling tools, these end uses were separately monitored to determine their impact on overall energy consumption.

  11. Segmented heat exchanger

    DOE Patents [OSTI]

    Baldwin, Darryl Dean (Lafayette, IN); Willi, Martin Leo (Dunlap, IL); Fiveland, Scott Byron (Metamara, IL); Timmons, Kristine Ann (Chillicothe, IL)

    2010-12-14

    A segmented heat exchanger system for transferring heat energy from an exhaust fluid to a working fluid. The heat exchanger system may include a first heat exchanger for receiving incoming working fluid and the exhaust fluid. The working fluid and exhaust fluid may travel through at least a portion of the first heat exchanger in a parallel flow configuration. In addition, the heat exchanger system may include a second heat exchanger for receiving working fluid from the first heat exchanger and exhaust fluid from a third heat exchanger. The working fluid and exhaust fluid may travel through at least a portion of the second heat exchanger in a counter flow configuration. Furthermore, the heat exchanger system may include a third heat exchanger for receiving working fluid from the second heat exchanger and exhaust fluid from the first heat exchanger. The working fluid and exhaust fluid may travel through at least a portion of the third heat exchanger in a parallel flow configuration.

  12. Electrically Switched Cesium Ion Exchange

    SciTech Connect (OSTI)

    JPH Sukamto; ML Lilga; RK Orth

    1998-10-23

    This report discusses the results of work to develop Electrically Switched Ion Exchange (ESIX) for separations of ions from waste streams relevant to DOE site clean-up. ESIX combines ion exchange and electrochemistry to provide a selective, reversible method for radionuclide separation that lowers costs and minimizes secondary waste generation typically associated with conventional ion exchange. In the ESIX process, an electroactive ion exchange film is deposited onto. a high surface area electrode, and ion uptake and elution are controlled directly by modulating the potential of the film. As a result, the production of secondary waste is minimized, since the large volumes of solution associated with elution, wash, and regeneration cycles typical of standard ion exchange are not needed for the ESIX process. The document is presented in two parts: Part I, the Summary Report, discusses the objectives of the project, describes the ESIX concept and the approach taken, and summarizes the major results; Part II, the Technology Description, provides a technical description of the experimental procedures and in-depth discussions on modeling, case studies, and cost comparisons between ESIX and currently used technologies.

  13. Corrosive resistant heat exchanger

    DOE Patents [OSTI]

    Richlen, Scott L. (Annandale, VA)

    1989-01-01

    A corrosive and errosive resistant heat exchanger which recovers heat from a contaminated heat stream. The heat exchanger utilizes a boundary layer of innocuous gas, which is continuously replenished, to protect the heat exchanger surface from the hot contaminated gas. The innocuous gas is conveyed through ducts or perforations in the heat exchanger wall. Heat from the heat stream is transferred by radiation to the heat exchanger wall. Heat is removed from the outer heat exchanger wall by a heat recovery medium.

  14. Fuel Cell Technical Publications

    Broader source: Energy.gov [DOE]

    Technical information about fuel cells published in technical reports, conference proceedings, journal articles, and websites is provided here.

  15. TECHNICAL REPORT

    Office of Scientific and Technical Information (OSTI)

    TECHNICAL REPORT September 1 through November 30, 1994 Project Title: MANUFACTURE OF AMMONIUM SULFATE FERTILIZER FROM FGD-GYPSUM ICCI Project Number: Principal Investigator: Other Investigators: Project Manager; DOE Cooperative Agreement Number: DE-FC22-92PC9252 1 (Year 3) 94-1/3.1B-3M M.4.M. Chou, Illinois State Geological Survey (ISGS) M. Rostam-Abadi and J.M. Lytle, ISGS R. Hoeft, University of Illinois; EZ. Blevins, Allied Signal-Chemicals; F. Achron, Southeast Marketing Chemical Process

  16. Technical Assistance for Code Implementation

    Broader source: Energy.gov [DOE]

    Lead Performers: -- Midwest Energy Efficiency Alliance – Chicago, IL -- Southwest Energy Efficiency Alliance – Boulder, CO -- Northeast Energy Efficiency Partnerships – Lexington, MA -- Southeast Energy Efficiency Alliance – Atlanta, GA -- Northwest Energy Efficiency Alliance – Portland, OR -- South-Central Partnership for Energy Efficiency as a Resource – Austin, TX -- National Association of State Energy Officials – Arlington, VA

  17. Woven heat exchanger

    DOE Patents [OSTI]

    Piscitella, R.R.

    1984-07-16

    This invention relates to a heat exchanger for waste heat recovery from high temperature industrial exhaust streams. In a woven ceramic heat exchanger using the basic tube-in-shell design, each heat exchanger consisting of tube sheets and tube, is woven separately. Individual heat exchangers are assembled in cross-flow configuration. Each heat exchanger is woven from high temperature ceramic fiber, the warp is continuous from tube to tube sheet providing a smooth transition and unitized construction.

  18. DOE to Host Swedish Scientists for Technical Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Swedish Scientists for Technical Workshop CARLSBAD, N.M., May 08, 2001 - The U.S. Department of Energy's (DOE) Carlsbad Field Office (CBFO) will host a group of Swedish Scientists for a technical workshop tomorrow through Friday (May 9-11) at the Pecos River Village Conference Center in Carlsbad. This is the first organized technical exchange between Sweden and CBFO. It involves representatives of SKB (the Swedish Nuclear Fuel and Waste Management Company). The group will cover a broad range of

  19. LSU EFRC - Center for Atomic Level Catalyst Design - Technical Conference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2012 2 space control 2012 Technical Conference: Center for Atomic-level Catalyst Design Oct. 8-10, 2012 LSU Welcomes CALC-D researchers to the Center's 4th Annual Technical Conference. Over 50 investigators from the US and Europe, along with students and post-docs, will exchange information over the 3 days of the conference. The conference will feature technical presentations, tours of LSU's synchrotron facility , and five short courses designed to introduce students to the principles and

  20. Scientific Exchange Program | Photosynthetic Antenna Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scientific Exchange Program Scientific Exchange Program Applications due February

  1. Energy Exchange News

    Broader source: Energy.gov [DOE]

    Please join FEMP Director Tim Unruh and Julia Kelley with Oak Ridge National Laboratory (ORNL) for a presentation on the Energy Exchange. The Energy Exchange is a new 2 1/2 day training opportunity...

  2. Anion exchange polymer electrolytes

    DOE Patents [OSTI]

    Kim, Yu Seung; Kim, Dae Sik

    2013-09-10

    Solid anion exchange polymer electrolytes include chemical compounds comprising a polymer backbone with side chains that include guanidinium cations.

  3. Final Technical Report (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Final Technical Report Citation Details In-Document Search Title: Final Technical Report This final technical report describes results and findings from a...

  4. Charge exchange system

    DOE Patents [OSTI]

    Anderson, Oscar A. (Berkeley, CA)

    1978-01-01

    An improved charge exchange system for substantially reducing pumping requirements of excess gas in a controlled thermonuclear reactor high energy neutral beam injector. The charge exchange system utilizes a jet-type blanket which acts simultaneously as the charge exchange medium and as a shield for reflecting excess gas.

  5. Sandia Energy - Technical Staff

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technical Staff Home Stationary Power Safety, Security & Resilience of Energy Infrastructure Battery Testing Technical Staff Technical StaffAshley Otero2015-10-20T01:52:21+00:00...

  6. Optimizing PT Arun LNG main heat exchanger

    SciTech Connect (OSTI)

    Irawan, B.

    1995-12-01

    The capacity of a LNG liquefaction unit has been increased by upgrading the refrigeration system, without making changes to the main heat exchanger (MHE). It is interesting, that after all modifications were completed, a higher refrigerant circulation alone could not increase LNG production. However, by optimizing the refrigerant component ratio, the UA of the MHE increased and LNG production improved. This technical evaluation will provide recommendations and show how the evaluation of the internal temperature profile helped optimize the MHE operating conditions.

  7. Technical Consultant Report Template

    Office of Energy Efficiency and Renewable Energy (EERE)

    Technical Consultant Report Template, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  8. Technical Consultant Contract

    Broader source: Energy.gov [DOE]

    Technical Consultant Contract, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  9. NNSA hosts Illinois emergency responders during technical exchange...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Countering Nuclear Terrorism About...

  10. Sandia National Laboratories: MTEM 2014: Malware Technical Exchange...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering Institute David Sames - JHU Applied Physics Laboratory Desiree Beck - MITRE Douglas Stetson - MIT Lincoln Laboratory Graham Baker - MIT Lincoln Laboratory Gregg...

  11. Sandia National Laboratories: MTEM 2014: Malware Technical Exchange...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Pyramid North Andaluz Hotel (downtown ABQ) Candlewood Suites ABQ Courtyard Albuquerque Airport Embassy Suites ABQ Hilton Garden Inn Uptown Hyatt Place Uptown Residence Inn Airport...

  12. Technical Information Exchange on Pyrolysis Oil: Potential for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... in the United States while creating American jobs and reducing greenhouse gas emissions. ... Heating Oil-A Commercial Perspective, by Steve Lupton, Envergent Technologies LLC ...

  13. Sandia National Laboratories: MTEM 2014: Malware Technical Exchange...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Free Cookies (and Other Ways to Leverage Leakage) John Jarocki 10:30 am Break 10:45 am Big Data Approaches to Malware Triage: Detecting, Understanding and Defending Against...

  14. Technical Information Exchange on Pyrolysis Oil: Potential for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Potential for a renewable heating oil substitution fuel in New England - Agenda Time ... background information on the heating oil industry and their efforts at pyrolysis oil ...

  15. Nercenergy » Microsoft Exchange Servers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Pillars of Web Application Monitoring http:www.nercenergy.comthe-four-pillars-of-microsoft-exchange-server-monitoring http:www.nercenergy.comthe-four-pillars-of-microsoft-...

  16. Information Exchange management site

    Energy Science and Technology Software Center (OSTI)

    2012-08-01

    Django site used to manage the approved information exchanges (content models) after creation and public comment at https://github.com/usgin-models.

  17. Information Exchange development forums

    Energy Science and Technology Software Center (OSTI)

    2012-08-01

    GitHub repositories for creating and managing information exchanges (content models) for use in the NGDS and larger USGIN systems.

  18. Energy Exchange Presentations

    Broader source: Energy.gov [DOE]

    Presentations from Energy Exchange, a two-and-a-half day training scheduled for August 11-13, 2015, at the Phoenix Convention Center in Phoenix, Arizona.

  19. Energy Exchange Speaker Biographies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Speaker Biographies U.S. Department of Energy Energy Exchange, August 2015 Chris Abbuehl (Constellation Energy) Christopher Abbuehl is responsible for leading the development of...

  20. Residential Exchange Program Settlement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contract No. 09PB-12132: deleting in their entirety and replacing with new language Sections 7, 11, and 12; and adding new Section 22, CALCULATION OF EXCHANGE PERIOD...

  1. Direct fired heat exchanger

    DOE Patents [OSTI]

    Reimann, Robert C. (Lafayette, NY); Root, Richard A. (Spokane, WA)

    1986-01-01

    A gas-to-liquid heat exchanger system which transfers heat from a gas, generally the combustion gas of a direct-fired generator of an absorption machine, to a liquid, generally an absorbent solution. The heat exchanger system is in a counterflow fluid arrangement which creates a more efficient heat transfer.

  2. Technical Area 21

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technical Area 21 Technical Area 21 Technical Area 21 was the site of chemical research for refining plutonium and plutonium metal production from 1945 to 1978. August 1, 2013 Technical Area 21 in 2011 Technical Area 21 in 2011 Technical Area 21 (TA-21), also known as DP Site was the site of chemical research for refining plutonium and plutonium metal production from 1945 to 1978. Between 2008 and 2011, MDAs B, U, and V were excavated and removed. 24 buildings were demolished in 2010 and 2011

  3. Federal Technical Capability Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-05-18

    Provides requirements and responsibilities to ensure recruitment and hiring of technically capable personnel to retain critical technical capabilities within the Department at all times. Cancels DOE M 426.1-1. Canceled by DOE O 426.1.

  4. Technical Assessment Team Report

    Broader source: Energy.gov [DOE]

    The Technical Assessment Team (TAT) is an independent team of technical experts that evaluated the mechanisms and chemical reactions contributing to the failure of a waste drum at the Waste...

  5. Anion exchange membrane

    DOE Patents [OSTI]

    Verkade, John G; Wadhwa, Kuldeep; Kong, Xueqian; Schmidt-Rohr, Klaus

    2013-05-07

    An anion exchange membrane and fuel cell incorporating the anion exchange membrane are detailed in which proazaphosphatrane and azaphosphatrane cations are covalently bonded to a sulfonated fluoropolymer support along with anionic counterions. A positive charge is dispersed in the aforementioned cations which are buried in the support to reduce the cation-anion interactions and increase the mobility of hydroxide ions, for example, across the membrane. The anion exchange membrane has the ability to operate at high temperatures and in highly alkaline environments with high conductivity and low resistance.

  6. Heat and mass exchanger

    DOE Patents [OSTI]

    Lowenstein, Andrew (Princeton, NJ); Sibilia, Marc J. (Princeton, NJ); Miller, Jeffrey A. (Hopewell, NJ); Tonon, Thomas (Princeton, NJ)

    2007-09-18

    A mass and heat exchanger includes at least one first substrate with a surface for supporting a continuous flow of a liquid thereon that either absorbs, desorbs, evaporates or condenses one or more gaseous species from or to a surrounding gas; and at least one second substrate operatively associated with the first substrate. The second substrate includes a surface for supporting the continuous flow of the liquid thereon and is adapted to carry a heat exchange fluid therethrough, wherein heat transfer occurs between the liquid and the heat exchange fluid.

  7. Heat and mass exchanger

    DOE Patents [OSTI]

    Lowenstein, Andrew (Princeton, NJ); Sibilia, Marc J. (Princeton, NJ); Miller, Jeffrey A. (Hopewell, NJ); Tonon, Thomas (Princeton, NJ)

    2011-06-28

    A mass and heat exchanger includes at least one first substrate with a surface for supporting a continuous flow of a liquid thereon that either absorbs, desorbs, evaporates or condenses one or more gaseous species from or to a surrounding gas; and at least one second substrate operatively associated with the first substrate. The second substrate includes a surface for supporting the continuous flow of the liquid thereon and is adapted to carry a heat exchange fluid therethrough, wherein heat transfer occurs between the liquid and the heat exchange fluid.

  8. Wound tube heat exchanger

    DOE Patents [OSTI]

    Ecker, Amir L. (Duncanville, TX)

    1983-01-01

    What is disclosed is a wound tube heat exchanger in which a plurality of tubes having flattened areas are held contiguous adjacent flattened areas of tubes by a plurality of windings to give a double walled heat exchanger. The plurality of windings serve as a plurality of effective force vectors holding the conduits contiguous heat conducting walls of another conduit and result in highly efficient heat transfer. The resulting heat exchange bundle is economical and can be coiled into the desired shape. Also disclosed are specific embodiments such as the one in which the tubes are expanded against their windings after being coiled to insure highly efficient heat transfer.

  9. TECHNICAL STANDARDS PROGRAM RESPONSIBILITIES

    Broader source: Energy.gov [DOE]

    PurposeThis procedure describes the responsibilities of persons who are charged with implementing the DOE Technical Standards Program. 

  10. SPEAR3 | Technical Documentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technical Documentation Hardware Component Database: Mechanical Electrical Drawing shor tcuts BPM Development SSRL | SLAC | Stanford University | SSRL Computing | SLAC Computing...

  11. TECHNICAL STANDARDS COMMENT RESOLUTION

    Broader source: Energy.gov [DOE]

    PurposeThis procedure provides guidance for resolving comments on DOE Technical Standards that are received during the coordination process. 

  12. ARM - Technical Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govPublicationsTechnical Reports Publications Journal Articles Conference Documents Program Documents Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Technical Reports For proper viewing, technical reports should be viewed with Adobe Acrobat Reader. Download the latest version from the Adobe Reader website.

  13. Apply for Technical Assistance

    Broader source: Energy.gov [DOE]

    Application form for U.S. Department of Energy (DOE) Office of Indian Energy technical assistance for tribes.

  14. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-02-23

    The Order promotes DOE's use of Voluntary Consensus Standards (VCS) as the primary method for application of technical standards and establishes and manages the DOE Technical Standards Program (TSP) including technical standards development, information, activities, issues, and interactions. Admin Chg 1 dated 3-12-13.

  15. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-11-19

    The Technical Standards Program (TSP) promotes the use of voluntary consensus standards by the Department of Energy (DOE), provides DOE with the means to develop needed technical standards, and manages overall technical standards information, activities, issues, and interactions. Cancels DOE O 1300.2A. Canceled by DOE O 252.1A

  16. Federal Technical Capability

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-11-19

    This directive defines requirements and responsibilities for meeting the Department of Energy (DOE) commitment to recruiting, deploying, developing, and retaining a technically competent workforce that will accomplish DOE missions in a safe and efficient manner through the Federal Technical Capability Program (FTCP). Cancels DOE M 426.1-1A, Federal Technical Capability Manual.

  17. U.S. DRIVE Highlights of Technical Accomplishments Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Page i | Preface U.S. DRIVE Highlights of Technical Accomplishments Overview Through precompetitive collaboration and technical information exchange, U.S. DRIVE partners are accelerating the development and availability of clean, efficient automotive and energy technologies. The U.S. DRIVE Partnership (Driving Research for Vehicle efficiency and Energy sustainability) is a voluntary government-industry partnership focused on precompetitive, advanced automotive and related infrastructure

  18. Anion exchange polymer electrolytes

    DOE Patents [OSTI]

    Kim, Yu Seung; Kim, Dae Sik

    2015-06-02

    Anion exchange polymer electrolytes that include guanidinium functionalized polymers may be used as membranes and binders for electrocatalysts in preparation of anodes for electrochemical cells such as solid alkaline fuel cells.

  19. Active microchannel heat exchanger

    DOE Patents [OSTI]

    Tonkovich, Anna Lee Y. (Pasco, WA) [Pasco, WA; Roberts, Gary L. (West Richland, WA) [West Richland, WA; Call, Charles J. (Pasco, WA) [Pasco, WA; Wegeng, Robert S. (Richland, WA) [Richland, WA; Wang, Yong (Richland, WA) [Richland, WA

    2001-01-01

    The present invention is an active microchannel heat exchanger with an active heat source and with microchannel architecture. The microchannel heat exchanger has (a) an exothermic reaction chamber; (b) an exhaust chamber; and (c) a heat exchanger chamber in thermal contact with the exhaust chamber, wherein (d) heat from the exothermic reaction chamber is convected by an exothermic reaction exhaust through the exhaust chamber and by conduction through a containment wall to the working fluid in the heat exchanger chamber thereby raising a temperature of the working fluid. The invention is particularly useful as a liquid fuel vaporizer and/or a steam generator for fuel cell power systems, and as a heat source for sustaining endothermic chemical reactions and initiating exothermic reactions.

  20. Energy Exchange Schedule

    Broader source: Energy.gov [DOE]

    The schedule for Energy Exchange is now available. Attendees will have the option of attending a variety of training sessions offered within 10 tracks during the times listed below. Session details...

  1. Green Exchange | Open Energy Information

    Open Energy Info (EERE)

    Exchange Jump to: navigation, search Name: Green Exchange Place: New York, New York Zip: NY 10282 Product: String representation "The Green Excha ... es marketplace." is too long....

  2. Radial flow heat exchanger

    DOE Patents [OSTI]

    Valenzuela, Javier (Hanover, NH)

    2001-01-01

    A radial flow heat exchanger (20) having a plurality of first passages (24) for transporting a first fluid (25) and a plurality of second passages (26) for transporting a second fluid (27). The first and second passages are arranged in stacked, alternating relationship, are separated from one another by relatively thin plates (30) and (32), and surround a central axis (22). The thickness of the first and second passages are selected so that the first and second fluids, respectively, are transported with laminar flow through the passages. To enhance thermal energy transfer between first and second passages, the latter are arranged so each first passage is in thermal communication with an associated second passage along substantially its entire length, and vice versa with respect to the second passages. The heat exchangers may be stacked to achieve a modular heat exchange assembly (300). Certain heat exchangers in the assembly may be designed slightly differently than other heat exchangers to address changes in fluid properties during transport through the heat exchanger, so as to enhance overall thermal effectiveness of the assembly.

  3. Technical Standards Managers

    Energy Savers [EERE]

    TECHNICAL STANDARDS PROGRAM ASSIGNMENT TELEPHONE/FAX/EMAIL NAME DOE FACILITY/ADDRESS LOC CODE DOE TECHNICAL STANDARD MANAGERS AU-30 DOE Technical Standards Program, Manager Jeī D. Feit AU-30 DOE Technical Standards Program, Program Specialist Kathy A. Knight AU-30 Support DOE Technical Standards Program, Contractor, supporƟng the DOE Oĸce of Environmental, Health, Safety and Security William A. Studniarz U.S. Department of Energy 19901 Germantown Road Germantown, MD 20876 U.S. Department of

  4. A self-circulating heat exchanger for use in stirling and

    Office of Scientific and Technical Information (OSTI)

    thermoacoustic-stirling engines (Conference) | SciTech Connect Conference: A self-circulating heat exchanger for use in stirling and thermoacoustic-stirling engines Citation Details In-Document Search Title: A self-circulating heat exchanger for use in stirling and thermoacoustic-stirling engines A major technical hurdle to the implementation of large Stirling engines or thermoacoustic engines is the reliability, performance, and manufacturability of the hot heat exchanger that brings

  5. Opportunities for Building America Research to Address Energy Upgrade Technical Challenges: HVAC, Envelope and IAQ (301)

    Broader source: Energy.gov [DOE]

    Better Buildings Residential Network Peer Exchange Call Series: Opportunities for Building America Research to Address Energy Upgrade Technical Challenges: HVAC, Envelope and IAQ (301), call slides and discussion summary.

  6. Finance Peer Exchange Kickoff Call

    Broader source: Energy.gov [DOE]

    BetterBuildings Financing Peer Exchange Kickoff Call, Call Slides and Discussion Summary, April 28, 2011.

  7. Energy Exchange | Department of Energy

    Office of Environmental Management (EM)

    Exchange Energy Exchange Energy Exchange Training and Trade Show: Providence, Rhode Island, August 9-11, 2016 Photo of the Providence, Rhode Island skyline. Building on the tradition of GovEnergy, the Energy Exchange is an educational and networking forum for those seeking to expand their knowledge of building operations, energy management, and sustainability in the federal sector. The Energy Exchange will be held at the Rhode Island Convention Center in Providence, Rhode Island. Training

  8. Scientific Exchange Program deadline | Photosynthetic Antenna...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scientific Exchange Program deadline Scientific Exchange Program deadline Applications due February...

  9. Buildings-to-Grid Technical Opportunities: From the Information and

    Office of Environmental Management (EM)

    Communications Technology Perspective | Department of Energy From the Information and Communications Technology Perspective Buildings-to-Grid Technical Opportunities: From the Information and Communications Technology Perspective Information and communications technology has enabled the integration of computer and audio-visual networks, leading to unprecedented exchange of data between various users and entities. This report illustrates obstacles to information and communications technology

  10. Voltage Control Technical Conference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1-08-Voltage-Control-Technical-Conference Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects & Initiatives Expand Projects &...

  11. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-02-23

    The order establishes the DOE Technical Standards Program. Admin Chg 1, dated 3-12-13 supersedes DOE O 252.1A.

  12. Sandia Energy - Technical Highlights

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technical Highlights Home Analysis A view upwind of SWIS' aerosol-generating system. Permalink Gallery Sandia Wake-Imaging System Successfully Deployed at Scaled Wind Farm...

  13. Technology Performance Exchange

    SciTech Connect (OSTI)

    2015-09-01

    To address the need for accessible, high-quality data, the Department of Energy has developed the Technology Performance Exchange (TPEx). TPEx enables technology suppliers, third-party testing laboratories, and other entities to share product performance data. These data are automatically transformed into a format that technology evaluators can easily use in their energy modeling assessments to inform procurement decisions.

  14. Federal Technical Capability Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-06-05

    The Federal Technical Capability Manual provides the process for the recruitment, deployment, development, and retention of Federal personnel with the demonstrated technical capability to safely accomplish the Departments missions and responsibilities at defense nuclear facilities. Canceled by DOE M 426.1-1A. Does not cancel other directives.

  15. About Technical Assistance

    Broader source: Energy.gov [DOE]

    As technologies proceed along the development pipeline, most face major hurdles as they attempt to enter commercial markets. Our Technical Assistance program helps lower a range of institutional barriers to prepare innovative, energy-efficient technologies and energy management systems for full commercial deployment. These projects and activities address barriers that are not technical, Technology Readiness Level 9.

  16. Technical Review Panel Report

    Energy Savers [EERE]

    TRP Report v7, 12 Aug 2012 TRP Report Final December 2012 Advanced Reactor Concepts Technical Review Panel Report Evaluation and Identification of future R&D on eight Advanced Reactor Concepts, conducted April - September 2012 December 2012 Public release version 2 Public release version 3 Table of Contents Summary ................................................................................................................................... 4 1. Overview of the Technical Review Panel

  17. Federal Technical Capability

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-11-19

    To define requirements and responsibilities for meeting the Department of Energy (DOE) commitment to recruiting, deploying, developing, and retaining a technically competent workforce that will accomplish DOE missions in a safe and efficient manner through the Federal Technical Capability Program (FTCP). Chg 1 dated 9-20-11 supersedes DOE O 426.1 and cancels DOE P 426.1.

  18. A corrosive resistant heat exchanger

    DOE Patents [OSTI]

    Richlen, S.L.

    1987-08-10

    A corrosive and erosive resistant heat exchanger which recovers heat from a contaminated heat stream. The heat exchanger utilizes a boundary layer of innocuous gas, which is continuously replenished, to protect the heat exchanger surface from the hot contaminated gas. The innocuous gas is pumped through ducts or perforations in the heat exchanger wall. Heat from the heat stream is transferred by radiation to the heat exchanger wall. Heat is removed from the outer heat exchanger wall by a heat recovery medium. 3 figs., 3 tabs.

  19. Technical Report Confirms Reliability of Yucca Mountain Technical Work |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Technical Report Confirms Reliability of Yucca Mountain Technical Work Technical Report Confirms Reliability of Yucca Mountain Technical Work February 17, 2006 - 11:59am Addthis WASHINGTON, DC - The Department of Energy's Office of Civilian Radioactive Waste Management (OCRWM) today released a report confirming the technical soundness of infiltration modeling work performed by U.S. Geological Survey (USGS) employees. "The report makes clear that the technical basis

  20. Phosphonic acid based exchange resins

    DOE Patents [OSTI]

    Horwitz, E.P.; Alexandratos, S.D.; Gatrone, R.C.; Chiarizia, R.

    1995-09-12

    An ion exchange resin is described for extracting metal ions from a liquid waste stream. An ion exchange resin is prepared by copolymerizing a vinylidene diphosphonic acid with styrene, acrylonitrile and divinylbenzene. 10 figs.

  1. Phosphonic acid based exchange resins

    DOE Patents [OSTI]

    Horwitz, E. Philip; Alexandratos, Spiro D.; Gatrone, Ralph C.; Chiarizia, Ronato

    1995-01-01

    An ion exchange resin for extracting metal ions from a liquid waste stream. An ion exchange resin is prepared by copolymerizing a vinylidene diphosphonic acid with styrene, acrylonitrile and divinylbenzene.

  2. The allowance exchange - ALEX

    SciTech Connect (OSTI)

    Mangis, J.K.; Miller, C.; Nicholas, J.

    1997-12-31

    The success of market approaches to pollution control in reducing the cost of compliance with environmental regulation, has insured the inclusion of emissions trading programs in current and future regulatory programs. As these environmental trading programs multiply, (SO{sub 2}, NO{sub x}, Ozone Precursors, Wetlands, CO{sub 2} and others), utility companies will need a central location to buy, sell, and trade these allowances to meet regulatory needs. In response, SAIC has designed and prototyped an electronic trading system that can provide a common forum for the location and exchange of environmental allowances, marketable permits, and other market based instruments for environmental management. SAIC intends to open and operate the Allowance Exchange (ALEX) for the trading of all environmental allowances, associated with the operation of electric utilities, as a service to the nation, the industry, and the environmental community.

  3. Thermoelectric heat exchange element

    DOE Patents [OSTI]

    Callas, James J. (Peoria, IL); Taher, Mahmoud A. (Peoria, IL)

    2007-08-14

    A thermoelectric heat exchange module includes a first substrate including a heat receptive side and a heat donative side and a series of undulatory pleats. The module may also include a thermoelectric material layer having a ZT value of 1.0 or more disposed on at least one of the heat receptive side and the heat donative side, and an electrical contact may be in electrical communication with the thermoelectric material layer.

  4. Heat-Exchanger Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Heat-Exchanger Development - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs

  5. Technology Performance Exchange

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology Performance Exchange TDM - Jason Koman (BTO) TDM - Dave Catarious (FEMP) William Livingood National Renewable Energy Laboratory William.Livingood@nrel.gov 303-384-7490 April 2, 2013 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Problem: Perceived fiscal risk associated with the installation of unfamiliar technologies impedes adoption rates for cost-effective, energy-saving products. Impact of Project: Enable end users to quickly and confidently assess

  6. Microsoft Exchange Servers Archives - Nercenergy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Exchange Servers What Certificates Should My Microsoft Exchange Server Have? Much like any other network application, in order to secure the functionality and safety of Microsoft Exchange Servers, it's essential to adopt specific certificates. Due to the literally thousands, if not millions, of security threats bombarding your Exchange Server every day, these certificates ensure users have a safe messaging experience while simultaneously safeguarding your data and sensitive information from

  7. Defining a new information exchange

    Energy Science and Technology Software Center (OSTI)

    2013-08-01

    This wiki page provides the public with all specifications needed to create a new information exchange (content model package).

  8. COORDINATION OF DOE TECHNICAL STANDARDS

    Broader source: Energy.gov [DOE]

    PurposeThis procedure provides guidance on the formal coordination of DOE Technical Standards in the DOE Technical Standards Program (TSP). The purpose of coordination of draft technical standards...

  9. Technical Standards Managers

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TECHNICAL STANDARDS PROGRAM ASSIGNMENT TELEPHONE/FAX/EMAIL NAME DOE FACILITY/ADDRESS LOC CODE AU-30 Je D. Feit DOE Technical Standards Program, Manager U.S. Department of Energy 19901 Germantown Road Germantown, MD 20876 Phone: (301) 903-0471 Fax: (301) 903-6172 Je rey.Feit@hq.doe.gov AU-30 Kathy A. Knight DOE Technical Standards Program, Program Specialist U.S. Department of Energy 19901 Germantown Road Germantown, MD 20876 Phone: (301) 903-4439 Fax: (301) 903-6172 kathy.knight@hq.doe.gov AU-30

  10. Technical Standards Newsletters | Department of Energy

    Energy Savers [EERE]

    Technical Standards Newsletters Technical Standards Newsletters February 24, 2016 Technical Standards Newsletter - February 2016 Standards Actions Technical Standards Newsletter, February 2016 October 19, 2015 Technical Standards Newsletter - October 2015 Standards Actions Technical Standards Newsletter, October 2015 April 21, 2015 Technical Standards Newsletter - April 2015 Standards Actions Technical Standards Program Newsletter, April 2015 December 23, 2014 Technical Standards Newsletter -

  11. Microsoft Word - 2015 Tech Exchange Biosketches R1

    Office of Environmental Management (EM)

    Interagency Performance & Risk Assessment Community of Practice 2015 Annual Technical Exchange Meeting Presenters Biographical Sketches Jane Hedges Jane A. Hedges is the Program Manager for the Washington State Department of Ecology's (Ecology) Nuclear Waste Program. In her role with Ecology, Ms Hedges is responsible for managing a program of 70 staff that oversees the cleanup of the Hanford Nuclear Facility in Eastern Washington, regulates other facilities which store, handle or dispose of

  12. Technical Planning Basis

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2007-07-11

    The Guide assists DOE/NNSA field elements and operating contractors in identifying and analyzing hazards at facilities and sites to provide the technical planning basis for emergency management programs. Supersedes DOE G 151.1-1, Volume 2.

  13. Apply for Technical Assistance

    Office of Environmental Management (EM)

    Apply for Technical Assistance Use this online form to request technical assistance from the DOE Offce of Indian Energy for planning and implementing energy projects on tribal lands. To help us determine whether your request fts within the program's scope and can be addressed with available resources, please provide the information below and then click on "Submit Request." Only requests from federally recognized Indian Tribes, bands, nations, tribal energy resource develop- ment

  14. TEP Technical Asssistance 2010

    Energy Savers [EERE]

    gov The Parker Ranch installation in Hawaii Tribal Energy Program TEP Technical Assistance 2010 Sandra Begay-Campbell Principal Member of the Technical Staff Sandia National Laboratories October 25, 2010 2 | Tribal Energy Program eere.energy.gov Navajo: NTUA Solar Customer Providing rural Navajo families ACCESS to electricity 3 | Tribal Energy Program eere.energy.gov Hopi: Off-Grid Resident Living off-grid does not mean sacrificing comfort but understanding your limits 4 | Tribal Energy Program

  15. Climate Action Champion: Technical

    Office of Environmental Management (EM)

    Learn more at energy.gov/betterbuildings Climate Action Champion: Technical Assistance to the City of Seattle Planning for Seattle's new Building Energy Code Overview The City of Seattle, identified as a Climate Action Champion (CAC) by the Department of Energy (DOE), is revising its 2012 Energy Code, already one of the most progressive in the country. Seattle has made a pledge to be carbon neutral by 2050. Seattle received technical assistance from the Pacific Northwest National Laboratory in

  16. DOE Energy Exchange

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Energy Exchange Ms. Amanda Simpson 11 August 2015 www.oei.army.mil UNCLASSIFIED Assistant Secretary of the Army (Installations, Energy & Environment) Acts of Man Acts of Nature Securing the Homeland High-voltage power lines with grid connection to Redstone Arsenal devastated by tornado on April 26, 2011. (TVA) The scene of a shooting and oil spill at a San Jose PG&E substation on April 16, 2013 (CBS) Enhancing Energy Security Office of Energy Initiatives UNCLASSIFIED 2 Army

  17. ION EXCHANGE PERFORMANCE OF TITANOSILICATES, GERMANATES AND CARBON NANOTUBES

    SciTech Connect (OSTI)

    Alsobrook, A.; Hobbs, D.

    2013-04-24

    This report presents a summary of testing the affinity of titanosilicates (TSP), germanium-substituted titanosilicates (Ge-TSP) and multiwall carbon nanotubes (MWCNT) for lanthanide ions in dilute nitric acid solution. The K-TSP ion exchanger exhibited the highest affinity for lanthanides in dilute nitric acid solutions. The Ge-TSP ion exchanger shows promise as a material with high affinity, but additional tests are needed to confirm the preliminary results. The MWCNT exhibited much lower affinities than the K-TSP in dilute nitric acid solutions. However, the MWCNT are much more chemically stable to concentrated nitric acid solutions and, therefore, may candidates for ion exchange in more concentrated nitric acid solutions. This technical report serves as the deliverable documenting completion of the FY13 research milestone, M4FT-13SR0303061 – measure actinide and lanthanide distribution values in nitric acid solutions with sodium and potassium titanosilicate materials.

  18. International Linear Collider-A Technical Progress Report (Technical

    Office of Scientific and Technical Information (OSTI)

    Report) | SciTech Connect Technical Report: International Linear Collider-A Technical Progress Report Citation Details In-Document Search Title: International Linear Collider-A Technical Progress Report The International Linear Collider: A Technical Progress Report marks the halfway point towards the Global Design Effort fulfilling its mandate to follow up the ILC Reference Design Report with a more optimised Technical Design Report (TDR) by the end of 2012. The TDR will be based on much of

  19. Technical Assessment Team (TAT) Supporting Technical Documents | Department

    Energy Savers [EERE]

    of Energy Technical Assessment Team (TAT) Supporting Technical Documents Technical Assessment Team (TAT) Supporting Technical Documents The documents (listed below) are the documents used to determine facts and conditions during the Department of Energy Accident Investigation Board's investigation into the radiological release event at the Waste Isolation Pilot Plant. The Technical Assessment Team (TAT) has undertaken a deliberative investigation process to understand and determine the cause

  20. Better Buildings Neighborhood Program Workforce Peer Exchange...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Neighborhood Program Workforce Peer Exchange Call: Contractor Pricing Better Buildings Neighborhood Program Workforce Peer Exchange Call: Contractor Pricing Better Buildings...

  1. Building America Case Study: Ground Source Heat Pump Research, TaC Studios Residence, Atlanta, Georigia (Fact Sheet), Technology Solutions for New and Existing Homes, Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ground Source Heat Pump Research, TaC Studios Residence Atlanta, Georgia PROJECT INFORMATION Construction: New Home Type: Single-family Builder: TaC Studios, tacstudios.com Size: 3,570 ft 2 Price Range: about $750,000 Date completed: 2011 Climate zone: Mixed-humid PERFORMANCE DATA HERS index: 66 Builder standard practice = 75 Case study house 3,570 ft 2 Projected annual energy cost savings: $493 Incremental cost of energy efficiency measures: $51,036 Incremental annual mortgage: $1,449 Annual

  2. Heat exchanger-accumulator

    DOE Patents [OSTI]

    Ecker, Amir L.

    1980-01-01

    What is disclosed is a heat exchanger-accumulator for vaporizing a refrigerant or the like, characterized by an upright pressure vessel having a top, bottom and side walls; an inlet conduit eccentrically and sealingly penetrating through the top; a tubular overflow chamber disposed within the vessel and sealingly connected with the bottom so as to define an annular outer volumetric chamber for receiving refrigerant; a heat transfer coil disposed in the outer volumetric chamber for vaporizing the liquid refrigerant that accumulates there; the heat transfer coil defining a passageway for circulating an externally supplied heat exchange fluid; transferring heat efficiently from the fluid; and freely allowing vaporized refrigerant to escape upwardly from the liquid refrigerant; and a refrigerant discharge conduit penetrating sealingly through the top and traversing substantially the length of the pressurized vessel downwardly and upwardly such that its inlet is near the top of the pressurized vessel so as to provide a means for transporting refrigerant vapor from the vessel. The refrigerant discharge conduit has metering orifices, or passageways, penetrating laterally through its walls near the bottom, communicating respectively interiorly and exteriorly of the overflow chamber for controllably carrying small amounts of liquid refrigerant and oil to the effluent stream of refrigerant gas.

  3. Technical Assistance to Developers

    SciTech Connect (OSTI)

    Rockward, Tommy; Borup, Rodney L.; Garzon, Fernando H.; Mukundan, Rangachary; Spernjak, Dusan

    2012-07-17

    This task supports the allowance of technical assistance to fuel-cell component and system developers as directed by the DOE. This task includes testing of novel materials and participation in the further development and validation of single cell test protocols. This task also covers technical assistance to DOE Working Groups, the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Driving Research and Innovation for Vehicle efficiency and Energy sustainability (U.S. Drive) Fuel Cell Technology Team. Assistance includes technical validation of new fuel cell materials and methods, single cell fuel cell testing to support the development of targets and test protocols, and regular advisory participation in other working groups and reviews. This assistance is made available to PEM fuel cell developers by request and DOE Approval. The objectives are to: (1) Support technically, as directed by DOE, fuel cell component and system developers; (2) Assess fuel cell materials and components and give feedback to developers; (3) Assist the DOE Durability Working Group with the development of various new material durability Testing protocols; and (4) Provide support to the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Fuel Cell Technology Team. FY2012 specific technical objectives are: (1) Evaluate novel MPL materials; (2) Develop of startup/ shutdown protocol; (3) Test the impact of hydrophobic treatment on graphite bi-polar plates; (4) Perform complete diagnostics on metal bi-polar plates for corrosion; and (5) Participate and lead efforts in the DOE Working Groups.

  4. The Office of Environmental Management technical reports: a bibliography

    SciTech Connect (OSTI)

    1997-07-01

    The Office of Environmental Management`s (EM) technical reports bibliography is an annual publication that contains information on scientific and technical reports sponsored by the Office of Environmental Management added to the Energy Science and Technology Database from July 1, 1995 through Sept. 30, 1996. This information is divided into the following categories: Focus Areas and Crosscutting Programs. Support Programs, Technology Integration and International Technology Exchange are now included in the General category. EM`s Office of Science and Technology sponsors this bibliography.

  5. Exchange Reactions Between a Molten Salt and a Solution of Tri-Butyl

    Office of Scientific and Technical Information (OSTI)

    Phosphate in a Liquid Silicone; REACTIONS D'ECHANGE ENTRE UN SEL FONDU ET UNE SOLUTION DE PHOSPHATE DE TRIBUTYLE DANS UN SILICONE LIQUIDE (Technical Report) | SciTech Connect Technical Report: Exchange Reactions Between a Molten Salt and a Solution of Tri-Butyl Phosphate in a Liquid Silicone; REACTIONS D'ECHANGE ENTRE UN SEL FONDU ET UNE SOLUTION DE PHOSPHATE DE TRIBUTYLE DANS UN SILICONE LIQUIDE Citation Details In-Document Search Title: Exchange Reactions Between a Molten Salt and a

  6. Technical Assistance | Department of Energy

    Energy Savers [EERE]

    Technical Assistance Technical Assistance The U.S. Department of Energy (DOE) Office of Indian Energy provides federally recognized Indian Tribes, including Alaska Native villages, tribal energy resource development organizations, and other organized tribal groups and communities, with technical assistance to advance tribal energy projects. On-Request TECHNICAL ASSSISTANCE Technical experts from DOE and its national laboratories, along with other partnering organizations, provide up to 40 hours

  7. Technical Assistance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Assistance Technical Assistance Photo courtesy of Dennis Schroeder, NREL 18022 Photo courtesy of Dennis Schroeder, NREL 18022 The U.S. Department of Energy offers technical assistance supporting energy efficiency and renewable energy. This technical assistance can include direct advice on issues or goals, tools and maps, and training. Some select technical assistance offerings are listed below. For States and Communities The State and Local Solution Center provides states and

  8. External Technical Review Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    External Technical Review Report March 2010 U U . . S S . . D D e e p p a a r r t t m m e e n n t t o o f f E E n n e e r r g g y y O O f f f f i i c c e e o o f f E E n n v v i i r r o o n n m m e e n n t t a a l l M M a a n n a a g g e e m m e e n n t t External Technical Review (ETR) Process Guide September 2008 U.S. DOE Office of Environmental Management September 2008 External Technical Review Process Guide Page 2 of 37 TABLE OF CONTENTS 1.0 INTRODUCTION

  9. Technical Services Agreement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    TSA-AGMT.DOC (9/06/01) 04/14/13 Technical Services Agreement No. TSA- The National Renewable Energy Laboratory (hereinafter "NREL") Operating under Prime Contract No. DE-AC36-08GO28308 for the Department of Energy And <Sponsor>` (hereinafter "Sponsor") I. Parties to the Technical Services Agreement. The Alliance for Sustainable Energy, LLC as Management and Operating (M&O) Contractor for the National Renewable Energy Laboratory ("Contractor"), under U.S.

  10. Technical Security Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-09-02

    This order implements the Department of Energy (DOE) Technical Security Program (TSP). This program represents the convergence of two distinct disciplines: Counterintelligence (CI) and Security Countermeasures. The elements of the TSP are driven by national level, interagency programs that are codified in various laws, Executive Orders, national polices and directives. Supersedes DOE M 470.4-4A Chg 1, dated 10-12-2010, Section D – Technical Surveillance Countermeasures (Official Use Only) and classified annex (Secret); and DOE M 205.1-3 (Official Use Only) and Part II (Secret), dated 4-17-2006.

  11. Federal Technical Capability Panel

    Office of Environmental Management (EM)

    Updated: April 2015 1 U. S. Department of Energy and National Nuclear Security Administration Federal Technical Capability Panel Organization Name Telephone Fax E-Mail FTCP CHAIR Chair (DOE/NTC) Karen L. Boardman (505) 845-6444 (505) 845-6079 kboardman@ntc.doe.gov FTCP Deputy Dave Chaney (505) 845-4300 (505) 845-4879 david.chaney@nnsa.doe.gov FTCP Technical Standards Mgr. Jeanette Yarrington (301) 903-7030 (301) 903-3445 Jeanette.Yarrington@hq.doe.gov FTCP Program Coordinator Jeannie Lozoya

  12. Heat exchanger bypass test report

    SciTech Connect (OSTI)

    De Vries, M.L.

    1995-01-26

    This test report documents the results that were obtained while conducting the test procedure which bypassed the heat exchangers in the HC-21C sludge stabilization process. The test was performed on November 15, 1994 using WHC-SD-CP-TC-031, ``Heat Exchanger Bypass Test Procedure.`` The primary objective of the test procedure was to determine if the heat exchangers were contributing to condensation of moisture in the off-gas line. This condensation was observed in the rotameters. Also, a secondary objective was to determine if temperatures at the rotameters would be too high and damage them or make them inaccurate without the heat exchangers in place.

  13. Energy Exchange 2015: Phoenix, Arizona

    Broader source: Energy.gov [DOE]

    Presentations from Energy Exchange, a two-and-a-half day training scheduled for August 11-13, 2015, at the Phoenix Convention Center in Phoenix, Arizona.

  14. Low Cost Polymer heat Exchangers for Condensing Boilers

    SciTech Connect (OSTI)

    Butcher, Thomas; Trojanowski, Rebecca; Wei, George; Worek, Michael

    2015-09-30

    Work in this project sought to develop a suitable design for a low cost, corrosion resistant heat exchanger as part of a high efficiency condensing boiler. Based upon the design parameters and cost analysis several geometries and material options were explored. The project also quantified and demonstrated the durability of the selected polymer/filler composite under expected operating conditions. The core material idea included a polymer matrix with fillers for thermal conductivity improvement. While the work focused on conventional heating oil, this concept could also be applicable to natural gas, low sulfur heating oil, and biodiesel- although these are considered to be less challenging environments. An extruded polymer composite heat exchanger was designed, built, and tested during this project, demonstrating technical feasibility of this corrosion-resistant material approach. In such flue gas-to-air heat exchangers, the controlling resistance to heat transfer is in the gas-side convective layer and not in the tube material. For this reason, the lower thermal conductivity polymer composite heat exchanger can achieve overall heat transfer performance comparable to a metal heat exchanger. However, with the polymer composite, the surface temperature on the gas side will be higher, leading to a lower water vapor condensation rate.

  15. Office of Technical Guidance

    Broader source: Energy.gov [DOE]

    The Office of Technical Guidance develops, promulgates, and interprets national level policies, procedures, and guidance to identify (1) information that must be classified or controlled under statute or Executive order to protect the national security, to ensure the effective operation of the Government, or to protect the privacy interests of individuals and (2) classified or controlled information that may be declassified or decontrolled.

  16. Materials Technical Team Roadmap

    SciTech Connect (OSTI)

    none,

    2013-08-01

    Roadmap identifying the efforts of the Materials Technical Team (MTT) to focus primarily on reducing the mass of structural systems such as the body and chassis in light-duty vehicles (including passenger cars and light trucks) which enables improved vehicle efficiency regardless of the vehicle size or propulsion system employed.

  17. COLLOQUIUM: Technical Aspects of the Iran Nuclear Agreement | Princeton

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Plasma Physics Lab November 6, 2015, 1:00pm to 2:15pm Colloquia MBG Auditorium COLLOQUIUM: Technical Aspects of the Iran Nuclear Agreement Professor Robert Goldston Princeton University Presentation: PDF icon FC06NOV2015_RGoldston_Iran Deal.pdf After 20 months of negotiation, China, France, Germany, Great Britain, Russia and the United States reached an agreement with Iran to constrain and verify its nuclear program, in exchange for relief from international sanctions. The constraints on

  18. Final Technical Report (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Final Technical Report Citation Details In-Document Search Title: Final Technical Report You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This ...

  19. Technology Performance Exchange (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-10-01

    This fact sheet, 'The Technology Performance Exchange' will be presented at the ET Summit, held at the Pasadena Convention Center on October 15-17, 2012. The Technology Performance Exchange will be a centralized, Web-based portal for finding and sharing energy performance data for commercial building technologies.

  20. Technical feasibility of storage on large dish stirling systems. (Technical

    Office of Scientific and Technical Information (OSTI)

    Report) | SciTech Connect Technical Report: Technical feasibility of storage on large dish stirling systems. Citation Details In-Document Search Title: Technical feasibility of storage on large dish stirling systems. Ă— You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy

  1. High Temperature Heat Exchanger Project

    SciTech Connect (OSTI)

    Anthony E. Hechanova, Ph.D.

    2008-09-30

    The UNLV Research Foundation assembled a research consortium for high temperature heat exchanger design and materials compatibility and performance comprised of university and private industry partners under the auspices of the US DOE-NE Nuclear Hydrogen Initiative in October 2003. The objectives of the consortium were to conduct investigations of candidate materials for high temperature heat exchanger componets in hydrogen production processes and design and perform prototypical testing of heat exchangers. The initial research of the consortium focused on the intermediate heat exchanger (located between the nuclear reactor and hydrogen production plan) and the components for the hydrogen iodine decomposition process and sulfuric acid decomposition process. These heat exchanger components were deemed the most challenging from a materials performance and compatibility perspective

  2. Modular heat exchanger

    DOE Patents [OSTI]

    Giardina, Angelo R. [Marple Township, Delaware County, PA

    1981-03-03

    A shell and tube heat exchanger having a plurality of individually removable tube bundle modules. A lattice of structural steel forming rectangular openings therein is placed at each end of a cylindrical shell. Longitudinal structural members are placed in the shell between corners of the rectangular openings situated on opposite ends of the shell. Intermediate support members interconnect the longitudinal supports so as to increase the longitudinal supports rigidity. Rectangular parallelpiped tube bundle moldules occupy the space defined by the longitudinal supports and end supports and each include a rectangular tube sheet situated on each end of a plurality of tubes extending therethrough, a plurality of rectangular tube supports located between the tube sheets, and a tube bundle module stiffening structure disposed about the bundle's periphery and being attached to the tube sheets and tube supports. The corners of each tube bundle module have longitudinal framework members which are mateable with and supported by the longitudinal support members. Intermediate support members constitute several lattice, each of which is situate d in a plane between the end support members. The intermediate support members constituting the several lattice extend horizontally and vertically between longitudinal supports of adjacent tube module voids. An alternative embodiment for intermediate support members constitute a series of structural plates situated at the corners of the module voids and having recesses therein for receiving the respective longitudinal support members adjacent thereto, protrusions separating the recesses, and a plurality of struts situated between protrusions of adjacent structural plates.

  3. Modular heat exchanger

    DOE Patents [OSTI]

    Giardina, A.R.

    1981-03-03

    A shell and tube heat exchanger is described having a plurality of individually removable tube bundle modules. A lattice of structural steel forming rectangular openings therein is placed at each end of a cylindrical shell. Longitudinal structural members are placed in the shell between corners of the rectangular openings situated on opposite ends of the shell. Intermediate support members interconnect the longitudinal supports so as to increase the longitudinal supports rigidity. Rectangular parallelepiped tube bundle modules occupy the space defined by the longitudinal supports and end supports and each include a rectangular tube sheet situated on each end of a plurality of tubes extending there through, a plurality of rectangular tube supports located between the tube sheets, and a tube bundle module stiffening structure disposed about the bundle's periphery and being attached to the tube sheets and tube supports. The corners of each tube bundle module have longitudinal framework members which are mateable with and supported by the longitudinal support members. Intermediate support members constitute several lattices, each of which is situated in a plane between the end support members. The intermediate support members constituting the several lattices extend horizontally and vertically between longitudinal supports of adjacent tube module voids. An alternative embodiment for intermediate support members constitute a series of structural plates situated at the corners of the module voids and having recesses therein for receiving the respective longitudinal support members adjacent thereto, protrusions separating the recesses, and a plurality of struts situated between protrusions of adjacent structural plates. 12 figs.

  4. Energy Exchange Fact Sheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fact Sheet Energy Exchange Fact Sheet Fact sheet offers an overview of the Energy Exchange, a two-and-a-half day training scheduled for August 11-13, 2015, at the Phoenix Convention Center in Phoenix, Arizona. PDF icon View the fact sheet - Updated May 2015 More Documents & Publications Energy Exchange Presentation Energy Exchange 2015: Phoenix, Arizona Energy Exchange Attendee Guide

  5. Technical Assistance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Assistance Technical Assistance The Technical Assistance program is managed through the Center for Sustainable Soil and Groundwater Solutions at SRNL. The Technical Assistance program provides teams of nationally recognized experts from across the complex to support both DOE's smaller sites, such as Paducah, Portsmouth, Pinellas, Ashtabula, Fernald, Mound and Kansas City Plant, and larger sites such as Oak Ridge, Los Alamos, Lawrence Livermore and Savannah River. Solutions that reduce

  6. General Technical Base Qualification Standard

    Office of Environmental Management (EM)

    SENSITIVE DOE-STD-1146-2007 REAFFIRMED: March 2015 DOE STANDARD GENERAL TECHNICAL BASE QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited ii This document is available on the Department of Energy Technical Standards Program Website at http://energy.gov/ehss/services/nuclear-safety/ department-energy-technical-standards-program

  7. TECHNICAL STANDARDS PROGRAM TOPICAL COMMITTEES

    Broader source: Energy.gov [DOE]

    PurposeThis procedure describes how topical committees are organized and recognized under the Technical Standards Program. 

  8. Technical Assistance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Resources » Technical Assistance Technical Assistance The DOE Office of Indian Energy and the Office of Energy Efficiency and Renewable Energy Tribal Energy Program provide federally recognized Indian Tribes, bands, nations, tribal energy resource development organizations, and other organized groups and communities-including Alaska Native villages or regional and village corporations-with technical assistance designed to advance renewable energy and energy efficiency projects. Technical

  9. OSTI, US Dept of Energy, Office of Scientific and Technical Information |

    Office of Scientific and Technical Information (OSTI)

    Speeding access to science information from DOE and Beyond September 20, 2005 Oak Ridge, TN - The U.S. Department of Energy Office of Scientific and Technical Information (OSTI) and the Energy Technology Data Exchange (ETDE) were recently cited in a European Commission study as key information systems that could serve as models in the development of a European Union-focused energy portal. ETDE is a multilateral information exchange agreement to which OSTI serves as the Operating Agent. The

  10. Opportunities for Building America Research to Address Energy Upgrade Technical Challenges: HVAC, Envelope & IAQ (301)

    Energy Savers [EERE]

    Better Buildings Residential Network Peer Exchange Call Series: Opportunities for Building America Research to Address Energy Upgrade Technical Challenges: HVAC, Envelope & IAQ (301) July 21, 2015 Call Slides and Discussion Summary Agenda  Call Logistics and Introductions  Opening Polls  Residential Network and Peer Exchange Call Overview  Introduction to Building America Technology to Market Roadmaps  Eric Werling, Building America Program Director, DOE Building Technologies

  11. Atlanta Central UESC Pilot Project

    Energy Savers [EERE]

    Upgrade - VFD on Pumps 30,151 14 0 0 3,874 0 Heating System Upgrade - Replace Electric Boiler & Pumps 175,063 192 (6,087) 0 36,272 1,667 DDC Controls & Optimization 9,435 15...

  12. Renewable Energy Technical Potential | Open Energy Information

    Open Energy Info (EERE)

    Renewable Energy Technical Potential Jump to: navigation, search Dictionary.png Renewable Energy Technical Potential: Renewable energy technical potential represents the achievable...

  13. Final Technical Report

    SciTech Connect (OSTI)

    Maxwell, Mike, J., P.E.

    2012-08-30

    The STI product is the Final Technical Report from ReliOn, Inc. for contract award DE-EE0000487: Recovery Act PEM Fuel Cell Systems Providing Emergency Reserve and Backup Power. The program covered the turnkey deployment of 431 ReliOn fuel cell systems at 189 individual sites for AT&T and PG&E with ReliOn functioning as the primary equipment supplier and the project manager. The Final Technical Report provides an executive level summary, a comparison of the actual accomplishments vs. the goals and objectives of the project, as well as a summary of the project activity from the contract award date of August 1, 2009 through the contract expiration date of December 31, 2011. Two photos are included in the body of the report which show hydrogen storage and bulk hydrogen refueling technologies developed as a result of this program.

  14. DOE Technical Assistance Program

    Broader source: Energy.gov (indexed) [DOE]

    Interior Lighting Efficiency for Municipalities eere.energy.gov The Parker Ranch installation in Hawaii DOE Technical Assistance Program Interior Lighting Efficiency for Municipalities Michael Myer Presenter - Pacific Northwest National Laboratory June 29, 2011 PNNL-SA-80993 Steve Kismohr Host - Midwest Energy Efficiency Alliance 2 | Interior Lighting Efficiency for Municipalities eere.energy.gov With this webinar, you will gain: 1. A Basic Understanding of Lighting Terminology 2. Ability to

  15. NASA technical baseline

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    technical baseline - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  16. Technical Surveillance Countermeasures Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1993-06-18

    To prescribe policies, responsibilities and authorities to establish Department of Energy (DOE) Technical Surveillance Countermeasures (TSCM) Program. This order implements the DOE TSCM Procedural Guide, DOE TSCM Operations Manual, DOE TSCM Report Writing Guide and Threat Assessment Scheduling System (TASS) which contain classified policies and procedures concerning the DOE TSCM Program. Cancels DOE 5636.3A. Canceled by DOE O 471.2 dated 9-28-95.

  17. DOE Technical Assistance Program

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Procuring and Implementing Solar Projects on Public Buildings Sarah Truitt, NREL Kim Owens & Craig Schultz, ICF International December 8, 2010 Photo courtesy of Bella Energy 2 | TAP Webinar eere.energy.gov What is TAP? DOE's Technical Assistance Program (TAP) supports the Energy Efficiency and Conservation Block Grant Program (EECBG) and the State Energy Program (SEP) by providing state, local, and tribal officials the tools and resources needed to implement successful and sustainable clean

  18. Volttron Technical meeting

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    VOLTTRON Technical Meeting Virginia Tech Advanced Research Institute July 2015 Our mission * Accelerate clean energy technologies, companies and projects * Create high-quality jobs and long-term economic growth * Support municipal clean energy projects * Invest in residential and commercial renewable energy installations * Cultivate a robust marketplace for innovation Wind Turbine Testing Facility Boston, Massachusetts Mass Energy Landscape/Challenges * M! #1 in energy efficiency but ... *

  19. Boiler MACT Technical Assistance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Boiler MACT Technical Assistance ADVANCED MANUFACTURING OFFICE Overview On December 20, 2012, the U.S. Environ- mental Protection Agency (EPA) finalized the reconsideration process for its Clean Air Act pollution standards National Emissions Standards for Hazardous Air Pollutants for Major Sources: Industrial, Commercial, and Institutional Boilers and Process Heaters (known as Boiler Maximum Achievable Control Technology (MACT)). This rule applies to boilers in a wide range of industrial

  20. OSTI, US Dept of Energy, Office of Scientific and Technical Information |

    Office of Scientific and Technical Information (OSTI)

    Speeding access to science information from DOE and Beyond FOR IMMEDIATE RELEASE June 20, 2006 OSTI Employee Director-Elect of New SLA Division Valerie Allen takes leadership role in information exchange forum Oak Ridge, TN - Valerie Allen, senior technical information specialist at the U.S. Department of Energy Office of Scientific and Technical Information, was recently named director-elect of the newly formed Government Information Division of the Special Libraries Association (SLA). The

  1. Heat exchange assembly

    DOE Patents [OSTI]

    Lowenstein, Andrew; Sibilia, Marc; Miller, Jeffrey; Tonon, Thomas S.

    2004-06-08

    A heat exchange assembly comprises a plurality of plates disposed in a spaced-apart arrangement, each of the plurality of plates includes a plurality of passages extending internally from a first end to a second end for directing flow of a heat transfer fluid in a first plane, a plurality of first end-piece members equaling the number of plates and a plurality of second end-piece members also equaling the number of plates, each of the first and second end-piece members including a recessed region adapted to fluidly connect and couple with the first and second ends of the plate, respectively, and further adapted to be affixed to respective adjacent first and second end-piece members in a stacked formation, and each of the first and second end-piece members further including at least one cavity for enabling entry of the heat transfer fluid into the plate, exit of the heat transfer fluid from the plate, or 180.degree. turning of the fluid within the plate to create a serpentine-like fluid flow path between points of entry and exit of the fluid, and at least two fluid conduits extending through the stacked plurality of first and second end-piece members for providing first fluid connections between the parallel fluid entry points of adjacent plates and a fluid supply inlet, and second fluid connections between the parallel fluid exit points of adjacent plates and a fluid discharge outlet so that the heat transfer fluid travels in parallel paths through each respective plate.

  2. Hear Exchange Assembly

    DOE Patents [OSTI]

    Lowenstein, Andrew (Princeton, NJ); Sibilia, Marc (Princeton, NJ); Miller, Jeffrey (Rocky Hill, NJ); Tonon, Thomas S. (Princeton, NJ)

    2003-05-27

    A heat exchange assembly comprises a plurality of plates disposed in a spaced-apart arrangement, each of the plurality of plates includes a plurality of passages extending internally from a first end to a second end for directing flow of a heat transfer fluid in a first plane, a plurality of first end-piece members equaling the number of plates and a plurality of second end-piece members also equaling the number of plates, each of the first and second end-piece members including a recessed region adapted to fluidly connect and couple with the first and second ends of the plate, respectively, and further adapted to be affixed to respective adjacent first and second end-piece members in a stacked formation, and each of the first and second end-piece members further including at least one cavity for enabling entry of the heat transfer fluid into the plate, exit of the heat transfer fluid from the plate, or 180.degree. turning of the fluid within the plate to create a serpentine-like fluid flow path between points of entry and exit of the fluid, and at least two fluid conduits extending through the stacked plurality of first and second end-piece members for providing first fluid connections between the parallel fluid entry points of adjacent plates and a fluid supply inlet, and second fluid connections between the parallel fluid exit points of adjacent plates and a fluid discharge outlet so that the heat transfer fluid travels in parallel paths through each respective plate.

  3. Heat exchanger with ceramic elements

    DOE Patents [OSTI]

    Corey, John A. (North Troy, NY)

    1986-01-01

    An annular heat exchanger assembly includes a plurality of low thermal growth ceramic heat exchange members with inlet and exit flow ports on distinct faces. A mounting member locates each ceramic member in a near-annular array and seals the flow ports on the distinct faces into the separate flow paths of the heat exchanger. The mounting member adjusts for the temperature gradient in the assembly and the different coefficients of thermal expansion of the members of the assembly during all operating temperatures.

  4. Heat exchanger using graphite foam

    DOE Patents [OSTI]

    Campagna, Michael Joseph; Callas, James John

    2012-09-25

    A heat exchanger is disclosed. The heat exchanger may have an inlet configured to receive a first fluid and an outlet configured to discharge the first fluid. The heat exchanger may further have at least one passageway configured to conduct the first fluid from the inlet to the outlet. The at least one passageway may be composed of a graphite foam and a layer of graphite material on the exterior of the graphite foam. The layer of graphite material may form at least a partial barrier between the first fluid and a second fluid external to the at least one passageway.

  5. Charge exchange molecular ion source

    DOE Patents [OSTI]

    Vella, Michael C.

    2003-06-03

    Ions, particularly molecular ions with multiple dopant nucleons per ion, are produced by charge exchange. An ion source contains a minimum of two regions separated by a physical barrier and utilizes charge exchange to enhance production of a desired ion species. The essential elements are a plasma chamber for production of ions of a first species, a physical separator, and a charge transfer chamber where ions of the first species from the plasma chamber undergo charge exchange or transfer with the reactant atom or molecules to produce ions of a second species. Molecular ions may be produced which are useful for ion implantation.

  6. Nonlocal exchange correlation in screened-exchange densityfunctional methods

    SciTech Connect (OSTI)

    Lee, Byounghak; Wang, Lin-Wang; Spataru, Catalin D.; Louie,Steven G.

    2007-04-22

    We present a systematic study on the exchange-correlationeffects in screened-exchange local density functional method. Toinvestigate the effects of the screened-exchange potential in the bandgap correction, we have compared the exchange-correlation potential termin the sX-LDA formalism with the self-energy term in the GWapproximation. It is found that the band gap correction of the sX-LDAmethod primarily comes from the downshift of valence band states,resulting from the enhancement of bonding and the increase of ionizationenergy. The band gap correction in the GW method, on the contrary, comesin large part from the increase of theconduction band energies. We alsostudied the effects of the screened-exchange potential in the totalenergy by investigating the exchange-correlation hole in comparison withquantum Monte Carlo calculations. When the Thomas-Fermi screening isused, the sX-LDA method overestimates (underestimates) theexchange-correlation hole in short (long) range. From theexchange-correlation energy analysis we found that the LDA method yieldsbetter absolute total energy than sX-LDA method.

  7. Anion exchange polymer electrolytes

    DOE Patents [OSTI]

    Kim, Yu Seung; Kim, Dae Sik; Lee, Kwan-Soo

    2013-07-23

    Solid anion exchange polymer electrolytes and compositions comprising chemical compounds comprising a polymeric core, a spacer A, and a guanidine base, wherein said chemical compound is uniformly dispersed in a suitable solvent and has the structure: ##STR00001## wherein: i) A is a spacer having the structure O, S, SO.sub.2, --NH--, --N(CH.sub.2).sub.n, wherein n=1-10, --(CH.sub.2).sub.n--CH.sub.3--, wherein n=1-10, SO.sub.2-Ph, CO-Ph, ##STR00002## wherein R.sub.5, R.sub.6, R.sub.7 and R.sub.8 each are independently --H, --NH.sub.2, F, Cl, Br, CN, or a C.sub.1-C.sub.6 alkyl group, or any combination of thereof; ii) R.sub.9, R.sub.10, R.sub.11, R.sub.12, or R.sub.13 each independently are --H, --CH.sub.3, --NH.sub.2, --NO, --CH.sub.nCH.sub.3 where n=1-6, HC.dbd.O--, NH.sub.2C.dbd.O--, --CH.sub.nCOOH where n=1-6, --(CH.sub.2).sub.n--C(NH.sub.2)--COOH where n=1-6, --CH--(COOH)--CH.sub.2--COOH, --CH.sub.2--CH(O--CH.sub.2CH.sub.3).sub.2, --(C.dbd.S)--NH.sub.2, --(C.dbd.NH)--N--(CH.sub.2).sub.nCH.sub.3, where n=0-6, --NH--(C.dbd.S)--SH, --CH.sub.2--(C.dbd.O)--O--C(CH.sub.3).sub.3, --O--(CH.sub.2).sub.n--CH--(NH.sub.2)--COOH, where n=1-6, --(CH.sub.2).sub.n--CH.dbd.CH wherein n=1-6, --(CH.sub.2).sub.n--CH--CN wherein n=1-6, an aromatic group such as a phenyl, benzyl, phenoxy, methylbenzyl, nitrogen-substituted benzyl or phenyl groups, a halide, or halide-substituted methyl groups; and iii) wherein the composition is suitable for use in a membrane electrode assembly.

  8. Heat pipe array heat exchanger

    DOE Patents [OSTI]

    Reimann, Robert C. (Lafayette, NY)

    1987-08-25

    A heat pipe arrangement for exchanging heat between two different temperature fluids. The heat pipe arrangement is in a ounterflow relationship to increase the efficiency of the coupling of the heat from a heat source to a heat sink.

  9. Energy Exchange 2015 Speaker Biographies

    Broader source: Energy.gov [DOE]

    Document offers an overview of each person speaking at the Energy Exchange, a two-and-a-half day training scheduled for August 11-13, 2015, at the Phoenix Convention Center in Phoenix, Arizona.

  10. Pu Anion Exchange Process Intensification

    SciTech Connect (OSTI)

    Taylor-Pashow, K.

    2015-10-08

    This project seeks to improve the efficiency of the plutonium anion-exchange process for purifying Pu through the development of alternate ion-exchange media. The objective of the project in FY15 was to develop and test a porous foam monolith material that could serve as a replacement for the current anion-exchange resin, Reillex® HPQ, used at the Savannah River Site (SRS) for purifying Pu. The new material provides advantages in efficiency over the current resin by the elimination of diffusive mass transport through large granular resin beads. By replacing the large resin beads with a porous foam there is much more efficient contact between the Pu solution and the anion-exchange sites present on the material. Several samples of a polystyrene based foam grafted with poly(4-vinylpyridine) were prepared and the Pu sorption was tested in batch contact tests.

  11. 2016 Energy Exchange (Providence, RI)

    Broader source: Energy.gov [DOE]

    The 2016 Energy Exchange in Providence, Rhode Island, will provide training to energy managers and sustainability professionals who are working to improve facility performance, advance the use of renewable energy, and reduce greenhouse gas emissions at federal sites.

  12. Energy Exchange 2015 Attendee Guide

    Broader source: Energy.gov [DOE]

    Attendee guide offers an overview of the Energy Exchange 2015, a two-and-a-half day training event that took place from August 11-13, 2015, at the Phoenix Convention Center in Phoenix, Arizona.

  13. Energy Exchange 2015 Fact Sheet

    Broader source: Energy.gov [DOE]

    Fact sheet offers an overview of the Energy Exchange 2015, a two-and-a-half day training that took place from August 11-13, 2015, at the Phoenix Convention Center in Phoenix, Arizona.

  14. Tianjin Climate Exchange TCX | Open Energy Information

    Open Energy Info (EERE)

    (TCX) Place: Tianjin Municipality, China Product: Exchange platform for emission and energy conservation trading products. References: Tianjin Climate Exchange (TCX)1 This...

  15. Environmental Banc Exchange | Open Energy Information

    Open Energy Info (EERE)

    Banc Exchange Jump to: navigation, search Name: Environmental Banc & Exchange Place: Owings Mills, Maryland Zip: 21117 4860 Product: Invests in environmentally friendly businesses....

  16. Vitrification of ion exchange resins

    DOE Patents [OSTI]

    Cicero-Herman, Connie A. (Aiken, SC); Workman, Rhonda Jackson (North Augusta, SC)

    2001-01-01

    The present invention relates to vitrification of ion exchange resins that have become loaded with hazardous or radioactive wastes, in a way that produces a homogenous and durable waste form and reduces the disposal volume of the resin. The methods of the present invention involve directly adding borosilicate glass formers and an oxidizer to the ion exchange resin and heating the mixture at sufficient temperature to produce homogeneous glass.

  17. Business Case for Technical Qualification Program Accreditation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Business Case for Technical Qualification Program Accreditation Incentives Business Case for Technical Qualification Program Accreditation Incentives TQP Accreditation standardize ...

  18. Technical Standards Newsletter - October 2007 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in Revision ... 1 *DOE Technical Standards Posted in RevCom for TSP ... 1 *DOE Technical Standards in Reaffirmation...

  19. Technical Standards Newsletter - February 2008 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in Revision ... 1 *DOE Technical Standards Posted in RevCom for TSP ... 1 *DOE Technical Standards in Reaffirmation...

  20. Technical Standards Newsletter - February 2007 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in Revision ... 1 *DOE Technical Standards Posted in RevCom for TSP ... 1 *DOE Technical Standards in Reaffirmation...

  1. Technical Qualification Program Administrative Forms | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Program Reaccreditation Report - Sandia Site Office Technical Qualification Program Self-Assessment Report - Oak Ridge Office - 2014 Technical Qualification Program...

  2. Technical Qualification Program Accreditation Objectives and...

    Office of Environmental Management (EM)

    Objectives and Criteria More Documents & Publications Technical Qualification Program Self-Assessment Report - Sandia Site Office - 2012 Technical Qualification Program...

  3. Technical skills training program

    SciTech Connect (OSTI)

    Not Available

    1989-10-01

    The departmentally administered Technical Skills Training Program encompasses three functional areas: Program Management Skills, Project Management Skills and Procurement and Assistance Skills Training. Primary emphasis is directed at providing DOE employees the specific work related skills necessary to perform effectively and efficiently. This directory contains descriptions of the courses available in the three program areas and general information for participation in the training programs. Separate sections have been reserved for the Current Year Schedule and listings of the Headquarters and Field Training Office Coordinators.

  4. RADTRAN 6 technical manual.

    SciTech Connect (OSTI)

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O'Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  5. AIKEN TECHNICAL COLLEGE CAMPUS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AIKEN TECHNICAL COLLEGE CAMPUS 2276 Jefferson Davis Highway, Graniteville SC 29829 Visitor parking is provided mainly on Parking Lot 3. In addition to that, all parking lots have some visitor parking available. SRSCRO office is in the Administration Building (building #100/200), 2nd floor, Room 230. After entering the building from parking lot #3, take the stairs immediately on your left up to the 2nd floor. On the 2nd floor, walk through the doors and to the first "Exit" sign, take a

  6. DOE Technical Assistance Program

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Driving Demand: Door-to-Door Outreach & Tracking Impacts October 19, 2010 2 | TAP Webinar eere.energy.gov What is TAP? DOE"s Technical Assistance Program (TAP) supports the Energy Efficiency and Conservation Block Grant Program (EECBG) and the State Energy Program (SEP) by providing state, local, and tribal officials the tools and resources needed to implement successful and sustainable clean energy programs. 3 | TAP Webinar eere.energy.gov How Can TAP Help You? TAP offers: * One-on-one

  7. LIQUID-FLUIDIZED-BED HEAT' EXCHANGER FLOW DISTRIBUTION MODELS

    Office of Scientific and Technical Information (OSTI)

    LIQUID-FLUIDIZED-BED HEAT' EXCHANGER FLOW DISTRIBUTION MODELS ICP-1151 January 1979 IDAHO OPERATIONS OFFICE UNDER CONTRACT EY-76-C-07-1540 Printed i n the United States of America Available from National Technical Information Service US. Department of Commerce 5285 Port Royal Road Springfield, Virginia 22161 Price: Printed Copy $4.00; Microfiche $3.00 I NOTICE This report was prepared as an account of work sponsored by the United States Government. Neither the United States nor the Department of

  8. New PerfSONAR Updates Showcased at 2015 Technology Exchange

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New PerfSONAR Updates Showcased at 2015 Technology Exchange News & Publications ESnet News Media & Press Publications and Presentations Galleries ESnet Awards and Honors Contact Us Media Jon Bashor, jbashor@lbl.gov, +1 510 486 5849 or Media@es.net Technical Assistance: 1 800-33-ESnet (Inside the US) 1 800-333-7638 (Inside the US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net New PerfSONAR Updates

  9. Technical Publications by System | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Publications by System Technical Publications by System Technical Publications are available for Steam, Process Heating, Compressed Air, Motor, Pump, Fan, and Plant Wide. These publications include Sourcebooks, Handbooks, Market Assessments, and other technical documents. Technical publications are also available for Combined Heat & Power. Sourcebooks give the detailed technical information necessary for comprehensive understanding of energy system components, including how to

  10. Final Technical Report

    SciTech Connect (OSTI)

    Newmarker, Marc; Campbell, Mark

    2012-03-16

    Design, validate at prototype level, and then demonstrate a full size, 800 MWht Thermal Energy Storage (TES) system based on Phase Changing Material (PCM) TES modules with round trip efficiency in excess of 93%. The PCM TES module would be the building block of a TES system which can be deployed at costs inline with the DOE benchmark of 2020. The development of a reliable, unsophisticated, modular, and scalable TES system designed to be massmanufactured utilizing advanced automated fabrication and assembly processes and field installed in the most cost-effective configuration could facilitate the attainment of a Levelized Cost of Energy (LCOE) of $.07/kWh by 2015. It was believed that the DOE targets can be attained by finding the best combinationTES module size, its optimal integration in the power cycle, and readily available PCM. Work under this project ultimately focused on the development and performance evaluation of a 100kWht prototype heat exchanger. The design utilizes a commercially available heat exchanger product to create a unique latent heat PCM storage module. The novel ideal associated with this technology is the inclusion of an agitation mechanism that is activated during the discharge process to improve heat transfer. The prototype unit did not meet the performance goals estimated through modeling, nor did the estimated costs of the system fall in line with the goals established by DOE.

  11. NASPI Synchrophasor Technical Report Phasor Tools Visualization Workshop Technical Summary

    Office of Environmental Management (EM)

    1 NASPI Synchrophasor Technical Report Phasor Tools Visualization Workshop Technical Summary February 28, 2012 Workshop June 13, 2012 Final Report Context This technical material was developed in June, 2012 by the North American SynchroPhasor Initiative, a collaboration between the North American electric industry (utilities, grid operators, vendors and consultants), the North American Electric Reliability Corporation, academics, and the U.S. Department of Energy, to advance and accelerate the

  12. Final Scientific/Technical Report (Technical Report) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: Final ScientificTechnical Report This project addressed the following research need in the Atmospheric System Research (ASR) Science and ...

  13. Lessons Learned: Peer Exchange Calls-- No. 5

    Broader source: Energy.gov [DOE]

    Better Buildings Residential Network Peer Exchange Call Series: Guide for Benchmarking Residential Program Progress with Examples.

  14. Energy Exchange Attendee Guide | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attendee Guide Energy Exchange Attendee Guide Attendee guide offers an overview of the Energy Exchange, a two-and-a-half day training scheduled for August 11-13, 2015, at the Phoenix Convention Center in Phoenix, Arizona. PDF icon View the attendee guide. More Documents & Publications Energy Exchange Presentation Energy Exchange 2015: Phoenix, Arizona Biomass 2010 Conference Agenda

  15. Proceedings of the sixth international conference on fluidized bed combustion. Volume III. Technical sessions

    SciTech Connect (OSTI)

    1980-08-01

    The Sixth International Conference on Fluidized Bed Combustion was held April 9-11, 1980, at the Atlanta Hilton, Atlanta, Georgia. It was sponsored by the US Department of Energy, the Electric Power Research Institute, the US Environmental Protection Agency, and the Tennessee Valley Authority. Forty-five papers from Vol. III of the proceedings have been entered individually into EDB and ERA. Two papers had been entered previously from other sources. (LTN)

  16. Better Buildings Residential Network Workforce Peer Exchange Call Series: Quality Control, Standardization of Upgrades, and Workforce Expectations, March 27, 2014

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Workforce Peer Exchange Call Series: Quality Control, Standardization of Upgrades, and Workforce Expectations March 27, 2014 Agenda 2  Call Logistics and Introductions  BBRN and Peer Exchange Call Overview  Featured Speakers - QA/QC Approaches & Lessons Learned  Dan Wildenhaus -Technical and QC Lead for Seattle's Community Power Works Program and Senior Building Scientist at CLEAResult  Brian Atchinson - Associate Project Manager, Quality, Standards and Compliance, New York

  17. Buildings to Grid Technical Meeting

    SciTech Connect (OSTI)

    none,

    2012-12-01

    A meeting book created for the Buildings to Grid Technical Meeting that includes speaker and attendee bios, as well as white papers and discussion questions.

  18. Technical Services | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    that cannot be duplicated elsewhere are also made available to universities and the private sector. Three Argonne organizations are noteworthy for their unique technical...

  19. Scientific and Technical Information Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-10-14

    The Order establishes requirements and responsibilities for managing DOE's scientific and technical information. Cancels DOE O 241.1. Canceled by DOE O 241.1B.

  20. Implementation Standing Technical Committee Presentation

    Broader source: Energy.gov [DOE]

    This presentation outlines the goals of the Implementation Standing Technical Committee, as presented at the Building America Spring 2012 Stakeholder meeting on February 29, 2012, in Austin, Texas.

  1. LLNL 1981: technical horizons

    SciTech Connect (OSTI)

    Not Available

    1981-07-01

    Research programs at LLNL for 1981 are described in broad terms. In his annual State of the Laboratory address, Director Roger Batzel projected a $481 million operating budget for fiscal year 1982, up nearly 13% from last year. In projects for the Department of Energy and the Department of Defense, the Laboratory applies its technical facilities and capabilities to nuclear weapons design and development and other areas of defense research that include inertial confinement fusion, nonnuclear ordnances, and particle-beam technology. LLNL is also applying its unique experience and capabilities to a variety of projects that will help the nation meet its energy needs in an environmentally acceptable manner. A sampling of recent achievements by LLNL support organizations indicates their diversity. (GHT)

  2. FINAL/ SCIENTIFIC TECHNICAL REPORT

    SciTech Connect (OSTI)

    McDonald, Henry; Singh, Suminderpal

    2006-08-28

    The overall objective of the Chattanooga fuel cell demonstrations project was to develop and demonstrate a prototype 5-kW grid-parallel, solid oxide fuel cell (SOFC) system that co-produces hydrogen, based on Ion America’s technology. The commercial viability of the 5kW SOFC system was tested by transporting, installing and commissioning the SOFC system at the Alternative Energy Laboratory at the University of Tennessee – Chattanooga. The system also demonstrated the efficiency and the reliability of the system running on natural gas. This project successfully contributed to the achievement of DOE technology validation milestones from the Technology Validation section of the Hydrogen, Fuel Cells and Infrastructure Technologies Program Multi-Year Research, Development and Demonstration Plan. Results of the project can be found in the final technical report.

  3. Technical Report - FINAL

    SciTech Connect (OSTI)

    Barbara Luke, Director, UNLV Engineering Geophysics Laboratory

    2007-04-25

    Improve understanding of the earthquake hazard in the Las Vegas Valley and to assess the state of preparedness of the area's population and structures for the next big earthquake. 1. Enhance the seismic monitoring network in the Las Vegas Valley 2. Improve understanding of deep basin structure through active-source seismic refraction and reflection testing 3. Improve understanding of dynamic response of shallow sediments through seismic testing and correlations with lithology 4. Develop credible earthquake scenarios by laboratory and field studies, literature review and analyses 5. Refine ground motion expectations around the Las Vegas Valley through simulations 6. Assess current building standards in light of improved understanding of hazards 7. Perform risk assessment for structures and infrastructures, with emphasis on lifelines and critical structures 8. Encourage and facilitate broad and open technical interchange regarding earthquake safety in southern Nevada and efforts to inform citizens of earthquake hazards and mitigation opportunities

  4. Technical applications of aerogels

    SciTech Connect (OSTI)

    Hrubesh, L.W.

    1997-08-18

    Aerogel materials posses such a wide variety of exceptional properties that a striking number of applications have developed for them. Many of the commercial applications of aerogels such as catalysts, thermal insulation, windows, and particle detectors are still under development and new application as have been publicized since the ISA4 Conference in 1994: e.g.; supercapacitors, insulation for heat storage in automobiles, electrodes for capacitive deionization, etc. More applications are evolving as the scientific and engineering community becomes familiar with the unusual and exceptional physical properties of aerogels, there are also scientific and technical application, as well. This paper discusses a variety of applications under development at Lawrence Livermore National Laboratory for which several types of aerogels are formed in custom sizes and shapes. Particular discussions will focus on the uses of aerogels for physics experiments which rely on the exceptional, sometimes unique, properties of aerogels.

  5. Energy Exchange Presentation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Presentation Energy Exchange Presentation Presentation slides from March 25 & April 8 webinar with FEMP Director Tim Unruh. Overview of the Energy Exchange, a federal training event scheduled for August 11-13, 2015, at the Phoenix Convention Center in Phoenix, Arizona. PDF icon eee 2015_webinar.pdf More Documents & Publications Energy Exchange Attendee Guide Energy Exchange Fact Sheet Energy Exchange 2015: Phoenix, Arizona

  6. Technical Standards Style Guide | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Style Guide Technical Standards Style Guide May 13, 2015 Style Guide for the Preparation of DOE Technical Standards (Standards, Handbooks, and Technical Standards Lists), May 13, 2015 The need for a technical standard is established in accordance with the Department of Energy Technical Standards Program Procedures (DOE TSPPs). If a DOE Technical Standard is needed, the guidance contained in this Style Guide may be helpful for development or maintenance of DOE standards, handbooks, or technical

  7. Grafted methylenediphosphonate ion exchange resins

    DOE Patents [OSTI]

    Trochimcznk, Andrzej W. (Knoxbille, TN); Gatrone, Ralph C. (Plymouth, PA); Alexandratos, Spiro (Knoxville, TN); Horwitz, E. Philip (Naperville, IL)

    1997-01-01

    An ion exchange resin is disclosed that is comprised of an insoluble copolymer onto which are grafted pendent groups that provide 1.0 to about 10 mmol/g dry weight phosphorous. The pendent groups have the formula ##STR1## wherein R is hydrogen, a cation or mixtures thereof; and R.sup.1 is hydrogen or an C.sub.1 -C.sub.2 alkyl group. The resin also contains zero to about 5 mmol/g dry weight of pendent aromatic sulfonate groups. Processes for making and using an ion exchange resin are also disclosed.

  8. Grafted methylenediphosphonate ion exchange resins

    DOE Patents [OSTI]

    Trochimcznk, Andrzej W. (Knoxville, TN); Gatrone, Ralph C. (Plymouth, PA); Alexandratos, Spiro (Knoxville, TN); Horwitz, E. Philip (Naperville, IL)

    1998-01-27

    An ion exchange resin is disclosed that is comprised of an insoluble copolymer onto which are grafted pendent groups that provide 1.0 to about 10 mmol/g dry weight phosphorous. The pendent groups have the formula ##STR1## wherein R is hydrogen, a cation or mixtures thereof; and R.sup.1 is hydrogen or an C.sub.1 -C.sub.2 alkyl group. The resin also contains zero to about 5 mmol/g dry weight of pendent aromatic sulfonate groups. Processes for making and using an ion exchange-resin are also disclosed.

  9. Grafted methylenediphosphonate ion exchange resins

    DOE Patents [OSTI]

    Trochimcznk, A.W.; Gatrone, R.C.; Alexandratos, S.; Horwitz, E.P.

    1997-04-08

    An ion exchange resin is disclosed that is comprised of an insoluble copolymer onto which are grafted pendent groups that provide 1.0 to about 10 mmol/g dry weight phosphorus. The pendent groups have the formula as shown in the patent wherein R is hydrogen, a cation or mixtures thereof; and R{sup 1} is hydrogen or an C{sub 1}-C{sub 2} alkyl group. The resin also contains zero to about 5 mmol/g dry weight of pendent aromatic sulfonate groups. Processes for making and using an ion exchange resin are also disclosed.

  10. The Oak Ridge Technical Information Center: A trailblazer in federal documentation

    SciTech Connect (OSTI)

    Vaden, W.M.

    1992-01-01

    This document attempts to record the history of US AEC`s Technical Information Center, from its conception (1947) to 1977. This organization centralizes and manages the issues related to control and dissemination of technical information, to fulfill the provisions of the Atomic Energy Act of 1946. TIC tried to search out and install efficient and economical systems for servicing the various technical information programs. It coordinated a direct organization-to-organization information exchange program, and it also participated in official bilateral exchange programs and in developing information systems for IAEA and Euratom. The work, planning, and strategies employed to achieve goals are chronicled in this document, with 18 chapters arranged into four sections according to different presidential administrations.

  11. The Oak Ridge Technical Information Center: A trailblazer in federal documentation

    SciTech Connect (OSTI)

    Vaden, W.M.

    1992-01-01

    This softbound book attempts to record the history of US AEC's Technical Information Center, from its conception (1947) to 1977. This organization centralizes and manages the issues related to control and dissemination of technical information, to fulfill the provisions of the Atomic Energy Act of 1946. TIC tried to search out and install efficient and economical systems for servicing the various technical information programs. It coordinated a direct organization-to-organization information exchange program, and it also participated in official bilateral exchange programs and in developing information systems for IAEA and Euratom. The work, planning, and strategies employed to achieve goals are chronicled in this book, whose 18 chapters are arranged into four sections according to different presidential administrations.

  12. Data quality objectives for Ion Exchange Module (IXM) disposition

    SciTech Connect (OSTI)

    Choi, I.

    1995-01-31

    This Data Quality Objective (DQO) document presents the data needs and accuracy requirements for sampling ion exchange modules at the K Basins, 100 K Area, to determine if there is a hydrogen gas buildup within the modules. This document was produced by PNL, with the assistance of Neptune and Associates, and was partly funded (for facilitator) by DOE-HQ as a demonstration DQO for EM activities. PNL involved a number of PNL, WHC and support contract staff (including external technical consultants) in meetings to define the data needed, along with the necessary accuracy, to resolve issues associated with hydrogen accumulation in Ion Exchange Modules (IXMS) that were generated prior to July 1994 and only have one nuc-fil vent. IXMs generated after July 1994 have multiple nuc-fil vents and do not require sampling. PNL transmitted this DQO to WHC on January 31, 1995. This Supporting Document is to assure that the document is captured into the document retrieval system. WHC review focused on the acceptability of the technical conclusions such that the data collected will meet minimum operational, safety and environmental needs.

  13. Grid Interaction Technical Team Roadmap

    SciTech Connect (OSTI)

    2013-06-01

    The mission of the Grid Interaction Technical Team (GITT) is to support a transition scenario to large scale grid-connected vehicle charging with transformational technology, proof of concept and information dissemination. The GITT facilitates technical coordination and collaboration between vehicle-grid connectivity and communication activities among U.S. DRIVE government and industry partners.

  14. Technical Publications | Department of Energy

    Energy Savers [EERE]

    Technical Publications Technical Publications Listed below are publications either authored or co-authored by CNS staff. The web links for these publications lead to non-DOE websites. Comparison of the MACCS2 Atmospheric Transport Model with Lagrangian Puff Models as Applied to Deterministic and Probabilistic Safety Analysis The Contribution of Palaeoseismology to Seismic Hazard Assessment in Site Evaluation for Nuclear Installations

  15. Hanford Site technical baseline database

    SciTech Connect (OSTI)

    Porter, P.E., Westinghouse Hanford

    1996-05-10

    This document includes a cassette tape that contains the Hanford specific files that make up the Hanford Site Technical Baseline Database as of May 10, 1996. The cassette tape also includes the delta files that delineate the differences between this revision and revision 3 (April 10, 1996) of the Hanford Site Technical Baseline Database.

  16. Technical planning activity: Final report

    SciTech Connect (OSTI)

    Not Available

    1987-01-01

    In April 1985, the US Department of Energy's (DOE's) Office of Fusion Energy commissioned the Technical Planning Activity (TPA). The purpose of this activity was to develop a technical planning methodology and prepare technical plans in support of the strategic and policy framework of the Magnetic Fusion Program Plan issued by DOE in February 1985. Although this report represents the views of only the US magnetic fusion community, it is international in scope in the sense that the technical plans contained herein describe the full scope of the tasks that are prerequisites for the commercialization of fusion energy. The TPA has developed a well-structured methodology that includes detailed definitions of technical issues, definitions of program areas and elements, statements of research and development objectives, identification of key decision points and milestones, and descriptions of facility requirements.

  17. Energy Exchange 2015 Overview Presentation

    Broader source: Energy.gov [DOE]

    Webinar presentation slides delivered by Federal Energy Management Program Director Timothy Unruh offer an overview of the Energy Exchange 2015, a federal training event that took place from August 11-13, 2015, at the Phoenix Convention Center in Phoenix, Arizona.

  18. Primer on nuclear exchange models

    SciTech Connect (OSTI)

    Hafemeister, David

    2014-05-09

    Basic physics is applied to nuclear force exchange models between two nations. Ultimately, this scenario approach can be used to try and answer the age old question of 'how much is enough?' This work is based on Chapter 2 of Physics of Societal Issues: Calculations on National Security, Environment and Energy (Springer, 2007 and 2014)

  19. Hydrogen Technical Publications | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Resources » Technical Publications » Hydrogen Technical Publications Hydrogen Technical Publications Technical information about hydrogen published in technical reports, conference proceedings, journal articles, and websites is provided here. General Production Delivery Storage General 2014 Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office (Fuel Cell Technologies Office, February 2015) Hydrogen Fueling Station in Honolulu,

  20. Technical Qualification Program Accreditation Objectives and Criteria |

    Energy Savers [EERE]

    Department of Energy Objectives and Criteria Technical Qualification Program Accreditation Objectives and Criteria The program clearly identifies and documents the process used to demonstrate employee technical competence. PDF icon TQP Accreditation Objectives and Criteria More Documents & Publications Technical Qualification Program Self-Assessment Report - Sandia Site Office - 2012 Technical Qualification Program Self-Assessment Report - Richland Operations Office - 2014 Technical

  1. Northeast Feedstock Supply Technical and Economica (Technical Report) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Northeast Feedstock Supply Technical and Economica Citation Details In-Document Search Title: Northeast Feedstock Supply Technical and Economica This in-depth analysis considers the current and f Authors: Corrie Nichol ; Kara Cafferty ; Richard Boardman Publication Date: 2013-03-01 OSTI Identifier: 1093395 Report Number(s): INL/EXT-13-28876 DOE Contract Number: DE-AC07-05ID14517 Resource Type: Technical Report Research Org: Idaho National Laboratory (INL) Sponsoring Org: DOE

  2. Disposal of bead ion exchange resin wastes

    SciTech Connect (OSTI)

    Gay, R.L.; Granthan, L.F.

    1985-12-17

    Bead ion exchange resin wastes are disposed of by a process which involves spray-drying a bead ion exchange resin waste in order to remove substantially all of the water present in such waste, including the water on the surface of the ion exchange resin beads and the water inside the ion exchange resin beads. The resulting dried ion exchange resin beads can then be solidified in a suitable solid matrix-forming material, such as a polymer, which solidifies to contain the dried ion exchange resin beads in a solid monolith suitable for disposal by burial or other conventional means.

  3. GEM Technical Design Report

    SciTech Connect (OSTI)

    Not Available

    1993-07-31

    The GEM collaboration was formed in June 1991 to develop a major detector for the SSC. The primary physics objectives of GEM are those central to the motivation for the SSC, to study high p{sub T} physics - exemplified by the search for Higgs bosons - and to search for new physics beyond the standard model. The authors present in this Technical Design Report (TDR) a detector with broad capabilities for the discovery and subsequent study of electroweak symmetry breaking, the origin of mass and flavor, and other physics requiring precise measurements of gammas, electrons, and muons - hence the name, GEM. In addition, as a design goal, they have taken care to provide the robustness needed to do the physics that requires high luminosity. Finally, good coverage and hermeticity allow the detection of missing transverse energy, E{sub T}. The GEM design emphasizes clean identification and high resolution measurement of the primary physics signatures for high p{sub T} physics. The approach is to make precise energy measurements that maximize the sensitivity to rare narrow resonances, to detect the elementary interaction products (quarks, leptons, and photons), and to build in the features required to reduce backgrounds.

  4. Final Technical Report

    SciTech Connect (OSTI)

    Stoessel, Chris

    2013-11-13

    This project developed a new high-performance R-10/high SHGC window design, reviewed market positioning and evaluated manufacturing solutions required for broad market adoption. The project objectives were accomplished by: identifying viable technical solutions based on modeling of modern and potential coating stacks and IGU designs; development of new coating material sets for HM thin film stacks, as well as improved HM IGU designs to accept multiple layers of HM films; matching promising new coating designs with new HM IGU designs to demonstrate performance gains; and, in cooperation with a window manufacturer, assess the potential for high-volume manufacturing and cost efficiency of a HM-based R-10 window with improved solar heat gain characteristics. A broad view of available materials and design options was applied to achieve the desired improvements. Gated engineering methodologies were employed to guide the development process from concept generation to a window demonstration. The project determined that a slightly de-rated window performance allows formulation of a path to achieve the desired cost reductions to support end consumer adoption.

  5. FINAL TECHNICAL REPORT

    SciTech Connect (OSTI)

    STEFAN VASILE; ZHENG LI

    2010-06-17

    High-resolution tracking detectors based on Active Pixel Sensor (APS) have been valuable tools in Nuclear Physics and High-Energy Physics research, and have contributed to major discoveries. Their integration time, radiation length and readout rate is a limiting factor for the planed luminosity upgrades in nuclear and high-energy physics collider-based experiments. The goal of this program was to demonstrate and develop high-gain, high-resolution tracking detector arrays with faster readout, and shorter radiation length than APS arrays. These arrays may operate as direct charged particle detectors or as readouts of high resolution scintillating fiber arrays. During this program, we developed in CMOS large, high-resolution pixel sensor arrays with integrated readout, and reset at pixel level. Their intrinsic gain, high immunity to surface and moisture damage, will allow operating these detectors with minimal packaging/passivation requirements and will result in radiation length superior to APS. In Phase I, we designed and fabricated arrays with calorimetric output capable of sub-pixel resolution and sub-microsecond readout rate. The technical effort was dedicated to detector and readout structure development, performance verification, as well as to radiation damage and damage annealing.

  6. The Office of Environmental Management technical reports: A bibliography

    SciTech Connect (OSTI)

    1998-07-01

    The Office of Environmental Management`s (EM) technical reports bibliography is an annual publication that contains information on scientific and technical reports sponsored by the Office of Environmental Management added to the Energy Science and Technology Database from July 1, 1995--that were published from October 1, 1996--September 30, 1997. This information is divided into the following categories: Miscellaneous, Focus Areas and Crosscutting Programs, Support Programs, Technology Integration and International Technology Exchange, are now included in the Miscellaneous category. The Office of Environmental Management within the Department of Energy (DOE) is responsible for environmental restoration, waste management, technology development and facility transition and management. Subjects include: subsurface contaminants; mixed waste characterization, treatment and disposal; radioactive tank waste remediation; plutonium; deactivation and decommissioning; robotics; characterization, monitoring, and sensor technology; and efficient separations. 880 refs.

  7. Energy Materials Coordinating Committee, fiscal year 1997. Annual technical report

    SciTech Connect (OSTI)

    1998-07-31

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department`s materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. This report summarizes EMaCC activities for FY 1997 and describes the materials research programs of various offices and divisions within the Department.

  8. Technical cooperation on nuclear security between the United States and China : review of the past and opportunities for the future.

    SciTech Connect (OSTI)

    Pregenzer, Arian Leigh

    2011-12-01

    The United States and China are committed to cooperation to address the challenges of the next century. Technical cooperation, building on a long tradition of technical exchange between the two countries, can play an important role. This paper focuses on technical cooperation between the United States and China in the areas of nonproliferation, arms control and other nuclear security topics. It reviews cooperation during the 1990s on nonproliferation and arms control under the U.S.-China Arms Control Exchange, discusses examples of ongoing activities under the Peaceful Uses of Technology Agreement to enhance security of nuclear and radiological material, and suggests opportunities for expanding technical cooperation between the defense nuclear laboratories of both countries to address a broader range of nuclear security topics.

  9. A self-circulating heat exchanger for use in stirling and

    Office of Scientific and Technical Information (OSTI)

    thermoacoustic-stirling engines (Conference) | SciTech Connect self-circulating heat exchanger for use in stirling and thermoacoustic-stirling engines Citation Details In-Document Search Title: A self-circulating heat exchanger for use in stirling and thermoacoustic-stirling engines Ă— You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service.

  10. District Technical Sergeant | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    District Technical Sergeant District Technical Sergeant A Manhattan Engineering District technical sergeant looks over nearly completed construction at Y-12.

  11. Active DOE Technical Standards Managers

    Office of Environmental Management (EM)

    TECHNICAL STANDARDS PROGRAM ASSIGNMENT TELEPHONE/FAX/EMAIL NAME DOE FACILITY/ADDRESS LOC CODE AU-30 Je D. Feit DOE Technical Standards Program, Manager U.S. Department of Energy 19901 Germantown Road Germantown, MD 20876 Phone: (301) 903-0471 Fax: (301) 903-6172 Je rey.Feit@hq.doe.gov AU-30 Kathy A. Knight DOE Technical Standards Program, Program Specialist U.S. Department of Energy 19901 Germantown Road Germantown, MD 20876 Phone: (301) 903-4439 Fax: (301) 903-6172 kathy.knight@hq.doe.gov AU-30

  12. The Independent Technical Analysis Process

    SciTech Connect (OSTI)

    Duberstein, Corey A.; Ham, Kenneth D.; Dauble, Dennis D.; Johnson, Gary E.

    2007-04-13

    The Bonneville Power Administration (BPA) contracted with the Pacific Northwest National Laboratory (PNNL) to provide technical analytical support for system-wide fish passage information (BPA Project No. 2006-010-00). The goal of this project was to produce rigorous technical analysis products using independent analysts and anonymous peer reviewers. In the past, regional parties have interacted with a single entity, the Fish Passage Center to access the data, analyses, and coordination related to fish passage. This project provided an independent technical source for non-routine fish passage analyses while allowing routine support functions to be performed by other well-qualified entities.

  13. Final Technical Report (Technical Report) | SciTech Connect

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Final Technical Report Citation Details In-Document Search Title: Final Technical Report The biochemistry of bacterial proteins involved in redox transformations of metals and minerals is, without dispute, an important area of research. Nevertheless, most studies on bacterial metal transformation have focused not on biochemistry but on genetics and genomics. The objective of this research is to better understand the role of conformation change in electron transfer from cytochromes to minerals, a

  14. Final Technical Report

    SciTech Connect (OSTI)

    Juan Camilo Serrano

    2011-12-16

    New and novel material and process technologies applied in wind blade designs and production are critical to increasing the competitiveness of wind power generation against traditional sources of energy. In this project, through collaboration between PPG Industries and MAG Industrial Automation Systems, the potential of using automated manufacturing for the production of fiber glass composite wind blades was evaluated from both technical and economic points of view. Further, it was demonstrated that by modifying the standard blade raw material forms through the use of cost effective pre-impregnated rovings coupled with using an automated fiber placement machine to lay up the parts, it is possible to produce state of the art composite laminates with significantly improved mechanical performance and with higher processing rates than standard blade production technology allows for today, thereby lowering the cost of energy over turbine blades made using traditional processes and materials. In conformity with the scope of work of the submitted proposal, the project team completed each task and documented and reported its findings on the appropriate quarterly report submitted to the DOE project team. The activities and this report are divided into 5 subtasks: (1) Material Investigation - Reviews traditional materials and key specifications and testing methods; (2) Manufacturing and Automation - Identifies new candidate material forms and automated layup processes; (3) Process Development - Performs trials of candidate materials and processes; (4) Predictive Analysis - Assesses impact of new material forms and automated processes on a model blade design; and (5) Feasibility Assessment - Compares traditional manufacturing processes and materials to new candidate material forms and automated processes.

  15. CTBT technical issues handbook

    SciTech Connect (OSTI)

    Zucca, J.J.

    1994-05-01

    The purpose of this handbook is to give the nonspecialist in nuclear explosion physics and nuclear test monitoring an introduction to the topic as it pertains to a Comprehensive Test Ban Treaty (CTBT). The authors have tried to make the handbook visually oriented, with figures paired to short discussions. As such, the handbook may be read straight through or in sections. The handbook covers four main areas and ends with a glossary, which includes both scientific terms and acronyms likely to be encountered during CTBT negotiations. The following topics are covered: (1) Physics of nuclear explosion experiments. This is a description of basic nuclear physics and elementary nuclear weapon design. Also discussed are testing practices. (2) Other nuclear experiments. This section discusses experiments that produce small amounts of nuclear energy but differ from explosion experiments discussed in the first chapter. This includes the type of activities, such as laser fusion, that would continue after a CTBT is in force. (3) Monitoring tests in various environments. This section describes the different physical environments in which a test could be conducted (underground, in the atmosphere, in space, underwater, and in the laboratory); the sources of non-nuclear events (such as earthquakes and mining operations); and the opportunities for evasion. (4) On-site inspections. A CTBT is likely to include these inspections as an element of the verification provisions, in order to resolve the nature of ambiguous events. This chapter describes some technical considerations and technologies that are likely to be useful. (5) Selecting verification measures. This chapter discusses the uncertain nature of the evidence from monitoring systems and how compliance judgments could be made, taking the uncertainties into account. It also discusses how to allocate monitoring resources, given the likelihood of testing by various countries in various environments.

  16. Technical Fact Sheets | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Fact Sheets Technical Fact Sheets Technical Fact Sheets (TFS) provide summary-level information on the impact of new, deployed, applied, and/or planned technical approaches supporting EM cleanup projects. The TFS is presented as a two-page document which summarizes the technical challenges, solutions, accomplishments, and impacts of the technical efforts. Additionally, they present the features, vendors, sites, states, national labs and universities that might be involved in developing

  17. Phosphonic acid based ion exchange resins

    DOE Patents [OSTI]

    Horwitz, E.P.; Alexandratos, S.D.; Gatrone, R.C.; Chiarizia, R.

    1996-07-23

    An ion exchange resin is described for extracting metal ions from a liquid waste stream. An ion exchange resin is prepared by copolymerizing a vinylidene diphosphonic acid with styrene, acrylonitrile and divinylbenzene. 10 figs.

  18. Phosphonic acid based ion exchange resins

    DOE Patents [OSTI]

    Horwitz, E. Philip; Alexandratos, Spiro D.; Gatrone, Ralph C.; Chiarizia, Ronato

    1996-01-01

    An ion exchange resin for extracting metal ions from a liquid waste stream. An ion exchange resin is prepared by copolymerizing a vinylidene diphosphonic acid with styrene, acrylonitrile and divinylbenzene.

  19. Phosphonic acid based ion exchange resins

    DOE Patents [OSTI]

    Horwitz, E. Philip; Alexandratos, Spiro D.; Gatrone, Ralph C.; Chiarizia, Ronato

    1994-01-01

    An ion exchange resin for extracting metal ions from a liquid waste stream. An ion exchange resin is prepared by copolymerizing a vinylidene disphosphonic acid with styrene, acrylonitrile and divinylbenzene.

  20. Chicago Climate Exchange CCX | Open Energy Information

    Open Energy Info (EERE)

    Illinois Zip: 60604 Product: Chicago Climate Exchange (CCX) is aiming at reduction of CO2 emission. References: Chicago Climate Exchange (CCX)1 This article is a stub. You can...

  1. Phosphonic acid based ion exchange resins

    DOE Patents [OSTI]

    Horwitz, E.P.; Alexandratos, S.D.; Gatrone, R.C.; Chiarizia, R.

    1994-01-25

    An ion exchange resin is described for extracting metal ions from a liquid waste stream. An ion exchange resin is prepared by copolymerizing a vinylidene diphosphonic acid with styrene, acrylonitrile and divinylbenzene. 9 figures.

  2. Helically coiled tube heat exchanger

    SciTech Connect (OSTI)

    Harris, A.M.

    1981-08-18

    In a heat exchanger such as a steam generator for a nuclear reactor, two or more bundles of helically coiled tubes are arranged in series with the tubes in each bundle integrally continuing through the tube bundles arranged in series therewith. Pitch values for the tubing in any pair of tube bundles, taken transverse to the path of the reactor coolant flow about the tubes, are selected as a ratio of two unequal integers to permit efficient operation of each tube bundle while maintaining the various tube bundles of the heat exchanger within a compact envelope. Preferably, the helix angle and tube pitch parallel to the path of coolant flow are constant for all tubes in a single bundle so that the tubes are of approximately the same length within each bundle.

  3. Heat exchanger and related methods

    DOE Patents [OSTI]

    Turner, Terry D.; McKellar, Michael G.

    2015-12-22

    Heat exchangers include a housing having an inlet and an outlet and forming a portion of a transition chamber. A heating member may form another portion of the transition chamber. The heating member includes a first end having a first opening and a second end having a second opening larger than the first opening. Methods of conveying a fluid include supplying a first fluid into a transition chamber of a heat exchanger, supplying a second fluid into the transition chamber, and altering a state of a portion of the first fluid with the second fluid. Methods of sublimating solid particles include conveying a first fluid comprising a material in a solid state into a transition chamber, heating the material to a gaseous state by directing a second fluid through a heating member and mixing the first fluid and the second fluid.

  4. Final Scientific/Technical Report

    SciTech Connect (OSTI)

    Brown, R. C.; McCarley, T. M.

    2006-05-04

    The overall goal of this project was to establish an education and training program in biobased products at Iowa State University (ISU). In particular, a graduate program in Biorenewable Resources and Technology (BRT) was to be established as a way of offering students advanced study in the use of plant- and crop-based resources in the production of biobased products. The program was to include three fundamental elements: an academic program, a research program, and industrial interactions. The academic program set out to introduce a new graduate major in Biorenewable Resources and Technology. Unlike other schools, which only offer certificates or areas of emphasis in biobased products, Iowa State University offers both M.S. and Ph.D degrees through its graduate program. Core required courses in Biorenewable Resources and Technology include a foundation course entitled Fundamentals of Biorenewable Resources (BRT 501); a seminar course entitled Biobased Products Seminar (BRT 506); a laboratory course, and a special topics laboratory course. The foundation course is a three-credit course introducing students to basic concepts in biorenewable resources and technology. The seminar course provides students with an opportunity to hear from nationally and internationally recognized leaders in the field. The laboratory requirement is a 1-credit laboratory course or a special topics laboratory/research experience (BRT 591L). As part of student recruitment, quarter-time assistantships from DOE funds were offered to supplement assistantships provided by faculty to students. Research was built around platform teams in an effort to encourage interdisciplinary research and collaborative student learning in biorenewable resources. A platform is defined as the convergence of enabling technologies into a highly integrated system for transforming a specific feedstock into desired products. The platform teams parallel the way industry conducts research and product development. Platform teams organize faculty and students for cross-disciplinary, systems-oriented research and collaborative learning. To date, nine platforms have been developed, although these will most likely be reorganized into a smaller number of broader topics. In the spring of 2004, BRT faculty initiated a regional partnership and collaborative learning program with colleagues at the University of Minnesota, Kansas State University, and South Dakota State University to develop distance education courses in biorenewable resources and technology. As a fledgling graduate program, the BRT graduate program didn’t have the breadth of resources to offer a large number of courses in biorenewables. Other schools faced a similar problem. The academic consortium as first conceived would allow students from the member schools to enroll in biorenewables courses from any of the participating schools, which would assure the necessary enrollment numbers to offer specialized course work. Since its inception, the collaborative curriculum partnership has expanded to include Louisiana State University and the University of Wisconsin. A second international curriculum development campaign was also initiated in the spring of 2004. In particular, several BRT faculty teamed with colleagues at the University of Arkansas, University of Washington, University of Gent (Belgium), National Polytechnic Institute of Toulouse (France), and Technical University of Graz (Austria) to develop an EU-US exchange program in higher education and vocational education/training (entitled “Renewable Resources and Clean Technology”).

  5. Technical Standards, Program Project Justification Statement...

    Energy Savers [EERE]

    Technical Standards, Program Project Justification Statement - August 29, 2012 Technical Standards, Program Project Justification Statement - August 29, 2012 August 29, 2012 DOE...

  6. Applications for Alaska Strategic Technical Assistance Response...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Applications for Alaska Strategic Technical Assistance Response Team Program Are Due Feb. 6 Applications for Alaska Strategic Technical Assistance Response Team Program Are Due ...

  7. Assistant Manager for Safety and Technical Services

    Broader source: Energy.gov [DOE]

    A successful candidate in this position will provide overall executive leadership to the Office of the Assistant Manager for Safety and Technical Services, which provides technical services and...

  8. Space Conditioning Standing Technical Commitee Presentation ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commitee Presentation Space Conditioning Standing Technical Commitee Presentation This presentation outlines the goals of the Space Conditioning Standing Technical ommittee, as...

  9. Technical Demonstration and Economic Validation of Geothermal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Demonstration and Economic Validation of Geothermal-Produced Electricity from Coproduced Water at Existing OilGas Wells in Texas Technical Demonstration and Economic ...

  10. Technical Reports - Disclaimer | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Overview Experimental Fusion Research Theoretical Fusion Research Basic Plasma Science Plasma Astrophysics Other Physics and Engineering Research PPPL Technical Reports Technical...

  11. Ricardo Detroit Technical Center | Open Energy Information

    Open Energy Info (EERE)

    Ricardo Detroit Technical Center Jump to: navigation, search Name: Ricardo Detroit Technical Center Place: Van Buren Township, Michigan Zip: 48111-1641 Sector: Services Product:...

  12. Technical Security Program - DOE Directives, Delegations, and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    470.6, Technical Security Program by Sam Soley Functional areas: Security, Counterintelligence This order implements the Department of Energy (DOE) Technical Security Program...

  13. Building Energy Codes Collaborative Technical Assistance for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Collaborative Technical Assistance for States Building Energy Codes Collaborative Technical ... 2014 BTO Peer Review Southeast Energy Efficiency Alliance's Building Energy Codes ...

  14. Building America Residential Energy Efficiency Technical Update...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Update Meeting: August 2011 Building America Residential Energy Efficiency Technical Update Meeting: August 2011 On this page, you may link to the summary report and ...

  15. Report: Technical Uncertainty and Risk Reduction

    Office of Environmental Management (EM)

    TECHNICAL UNCERTAINTY AND RISK REDUCTION Background In FY 2007 EMAB was tasked to assess EM's ability to reduce risk and technical uncertainty. Board members explored this topic...

  16. Water Heating Standing Technical Committee Presentation | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Water Heating Standing Technical Committee Presentation Water Heating Standing Technical Committee Presentation This presentation outlines the goals of the Water Heating Standing...

  17. DOE Publishes Technical Brief Clarifying Misconceptions about...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Brief Clarifying Misconceptions about Safety of LED Lighting DOE Publishes Technical Brief Clarifying Misconceptions about Safety of LED Lighting October 22, 2014 - ...

  18. Mianyang Taidu Enviroment Energy Technical Development Company...

    Open Energy Info (EERE)

    Mianyang Taidu Enviroment Energy Technical Development Company Ltd Jump to: navigation, search Name: Mianyang Taidu Enviroment Energy Technical Development Company Ltd. Place:...

  19. Department of Energy Technical Standards Procedures | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    charged with implementing the Department of Energy (DOE) Technical Standards Program (TSP). September 16, 2013 DOE-TSPP-2-2013, Initiating DOE Technical Standards This procedure...

  20. Safety, Codes and Standards Technical Publications | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical information about safety, codes and standards published in technical reports, conference proceedings, journal articles, and websites is provided here. General Safety ...

  1. External Technical Reviews | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Waste Management Tank Waste and Waste Processing External Technical Reviews External Technical Reviews Documents Available for Download March 31, 2006 Hanford ETR...

  2. Scientific Exchange Application | Photosynthetic Antenna Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scientific Exchange Program / Scientific Exchange Application Scientific Exchange Application Please read all instructions before submitting your application. Interested applicants should complete the following application and provide the materials requested below. The PARC Steering Committee will evaluate these proposals and select those that offer the best chance to lead to new directions and publishable results. An effort will be made to achieve some balance in the various types of exchanges

  3. Hydrogen Storage Technical Team Roadmap

    SciTech Connect (OSTI)

    2013-06-01

    The mission of the Hydrogen Storage Technical Team is to accelerate research and innovation that will lead to commercially viable hydrogen-storage technologies that meet the U.S. DRIVE Partnership goals.

  4. Technical Education | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technical Education at GE Global Research Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click...

  5. Technical Assessment Team Fact Sheet

    Broader source: Energy.gov [DOE]

    This fact sheet focuses on the U.S. Department of Energy’s report by an independent team of technical experts that evaluated the mechanisms and chemical reactions contributing to the failure of a...

  6. Technical Contact: James C. Liljegren

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    within approximately 50 feet. Precision timing is very important to the Technical Contact: James C. Liljegren Phone: 630-252-9540 Email: jcliljegren@anl.gov Editor: Donna J....

  7. Fuel Cell Technical Team Roadmap

    SciTech Connect (OSTI)

    2013-06-01

    The Fuel Cell Technical Team promotes the development of a fuel cell power system for an automotive powertrain that meets the U.S. DRIVE Partnership (United States Driving Research and Innovation for Vehicle efficiency and Energy sustainability) goals.

  8. UVIG 2015 Spring Technical Workshop

    Broader source: Energy.gov [DOE]

    The 2015 UVIG Spring Technical Workshop will provide attendees with an expanded perspective on the status of wind and solar generation in utility systems in the United States and other countries....

  9. A Lightweight Material for Heat Exchange Applications

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Continuous Processing of High Thermal Conductivity Polyethylene Fibers and Sheets ADVANCED MANUFACTURING OFFICE A Lightweight Material for Heat Exchange Applications Introduction Thermal conductivity is an important consideration in choosing materials for different manufacturing applications. For example, materials used in heat exchangers require high thermal conductivity because heat must be transferred between substances located at a distance from one another. Historically, heat exchangers

  10. 1999 EV America Technical Specifications

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    9 EV AMERICA TECHNICAL SPECIFICATIONS Effective October 1, 1999 Prepared by Electric Transportation Applications 1999 EV AMERICA TECHNICAL SPECIFICATIONS 2 MINIMUM VEHICLE REQUIREMENTS For a vehicle to be considered qualified as an EV America-USDOE "Production" level vehicle, it must meet the minimum criteria defined by "shall" terminology utilized in the Specification. [For clarity, the use of the word "Shall" defines minimum requirements, whereas the use of the

  11. Technical Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reports Technical Reports A wide range of resources addressing the many benefits of combined heat and power (CHP) is available, including the technical reports below. For example, Assessing the Benefits of On-Site Combined Heat and Power (CHP) During the August 14, 2003, Blackout highlights facilities that were able to remain operational during the 2003 blackout due to backup generators or distributed generation (DG) resources, including CHP. Assessing the Benefits of On-Site CHP During the

  12. Guam Initial Technical Assessment Report

    SciTech Connect (OSTI)

    Baring-Gould, I.; Conrad, M.; Haase, S.; Hotchkiss, E.; McNutt, P.

    2011-04-01

    Under an interagency agreement, funded by the Department of Interior's (DOI) Office of Insular Affairs (OIA), the National Renewable Energy Laboratory (NREL) was tasked to deliver technical assistance to the island of Guam by conducting an island initial technical assessment that would lay out energy consumption and production data and establish a baseline. This assessment will be used to conduct future analysis and studies by NREL that will estimate energy efficiency and renewable energy potential for the island of Guam.

  13. Lessons Learned: Peer Exchange Calls -- No. 5 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Lessons Learned: Peer Exchange Calls -- No. 5 Better Buildings Residential Network Lessons Learned: Peer Exchange Calls, No. 5. PDF icon Lessons Learned: Peer Exchange Calls -- ...

  14. Better Buildings Working with Utilities Peer Exchange Call: Kick...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Working with Utilities Peer Exchange Call: Kick-off Better Buildings Working with Utilities Peer Exchange Call: Kick-off Better Buildings Working with Utilities Peer Exchange Call:...

  15. Peer Exchange Call on Financing and Revenue: Bond Funding | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Peer Exchange Call on Financing and Revenue: Bond Funding Peer Exchange Call on Financing and Revenue: Bond Funding Better Buildings Neighborhood Program Peer Exchange Call on...

  16. SPR - Historical Oil Sales and Exchanges | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - Historical Oil Sales and Exchanges SPR - Historical Oil Sales and Exchanges PDF icon SPR - Historical Oil Sales and Exchanges More Documents & Publications Historical SPR Annual ...

  17. European Energy Exchange AG EEX | Open Energy Information

    Open Energy Info (EERE)

    Energy Exchange AG EEX Jump to: navigation, search Name: European Energy Exchange AG (EEX) Place: Leipzig, Germany Zip: D-04109 Product: Germany's energy exchange, which aims to...

  18. Finance Peer Exchange Kickoff Call | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Finance Peer Exchange Kickoff Call Finance Peer Exchange Kickoff Call BetterBuildings Financing Peer Exchange Kickoff Call, Call Slides and Discussion Summary, April 28, 2011. PDF ...

  19. High Thermal Conductivity Polymer Composites for Low-Cost Heat Exchangers

    Broader source: Energy.gov (indexed) [DOE]

    Catherine Thibaud-Erkey, United Technologies Research Center (Presenter) No technical data subject to EAR or ITAR U.S. DOE Advanced Manufacturing Office Program Review Meeting Washington, D.C. May 28-29, 2015 This presentation does not contain any proprietary, confidential, or otherwise restricted information. Project Objective ď‚— Deliverable: Database of relevant material properties and characteristics to provide guidance for future heat exchanger development. (1 year project - started

  20. Microsoft Word - P&RA CoP Techncial Exchange Final Agenda

    Office of Environmental Management (EM)

    Agenda Interagency Steering Committee on Performance and Risk Assessment Community of Practice Annual Technical Exchange Meeting December 15 and 16, 2015 Washington State Department of Ecology Offices 3100 Port of Benton Blvd., Richland, WA 99354 Phone: 509-372-7950 Theme: Interpretation of Performance and Risk Assessment Results DECEMBER 15, 2015 (TUESDAY) Join WebEx meeting Meeting number: 995 974 834 Meeting password: Meeting1 Join by phone 1-650-479-3208 Call-in toll number (US/Canada)

  1. Fluidized bed heat exchanger utilizing angularly extending heat exchange tubes

    DOE Patents [OSTI]

    Talmud, Fred M. (Berkeley Heights, NJ); Garcia-Mallol, Juan-Antonio (Morristown, NJ)

    1980-01-01

    A fluidized bed heat exchanger in which air is passed through a bed of particulate material containing fuel disposed in a housing. A steam/water natural circulation system is provided and includes a steam drum disposed adjacent the fluidized bed and a series of tubes connected at one end to the steam drum. A portion of the tubes are connected to a water drum and in the path of the air and the gaseous products of combustion exiting from the bed. Another portion of the tubes pass through the bed and extend at an angle to the upper surface of the bed.

  2. Technical Support and Transfer of Geothrmal Technical Knowledge and Information

    SciTech Connect (OSTI)

    John W. Lund Tonya "Toni" Boyd

    2007-11-14

    The Geo-Heat Center (GHC) staff provided responses to 1442 technical support requests during the contract period (April 1, 2006 to September 30, 2007), which were six quarters under this contract. Our website, consisting of 1900 files, also contributes to our technical assistance activity. Downloaded files were 1,889,323 (3,448 per day) from our website, the total number of users was 1,365,258 (2,491 per day), and the total number of hits were 6,008,500 (10,064 per day). The GHC staff attended 60 workshops, short course and professional meeting and made 29 technical presentations. The staff also prepared and mailed out 2,000 copies of each of five issues of the GHC Quaterly Bulletin which contained 26 articles. We also mailed out approximately 5,000 papers and publications to interested individuals and organizations.

  3. Ion exchange purification of scandium

    DOE Patents [OSTI]

    Herchenroeder, L.A.; Burkholder, H.R.

    1990-10-23

    An improvement in purification of scandium through ion exchange chromatography is disclosed in which the oxidation potential of the eluting solution is altered by the addition of potassium chlorate or ammonium chloride so that removal of contaminants is encouraged. The temperature, pH and concentration of the eluent HEDTA are controlled in order to maintain the scandium in the column while minimizing dilution of the scandium band. Recovery of scandium is improved by pumping dilute scandium over the column prior to stripping the scandium and precipitation. This eliminates the HEDTA ion and other monovalent cations contaminating the scandium band. This method maximizes recovery of scandium while maintaining purity. 2 figs.

  4. Ion exchange purification of scandium

    DOE Patents [OSTI]

    Herchenroeder, Laurie A. (Noblesville, IN); Burkholder, Harvey R. (Ames, IA)

    1990-10-23

    An improvement in purification of scandium through ion exchange chromatography is disclosed in which the oxidation potential of the eluting solution is altered by the addition of potassium chlorate or ammonium chloride so that removal of contaminants is encouraged. The temperature, pH and concentration of the eluent HEDTA are controlled in order to maintain the scandium in the column while minimizing dilution of the scandium band. Recovery of scandium is improved by pumping dilute scandium over the column prior to stripping the scandium and precipitation. This eliminates the HEDTA ion and other monovalent cations contaminating the scandium band. This method maximizes recovery of scandium while maintaining purity.

  5. NREL - DOE Technology Performance Exchange

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - DOE Technology Performance Exchange 2014 Building Technologies Office Peer Review William Livingood, William.Livingood@nrel.gov National Renewable Energy Laboratory Project Summary Timeline: Start date: January 27, 2012 Planned end date: September 30, 2014 Key Milestones 1. Launch TPEx with 15 technology product categories; 9/30/2014 2. Recruit three utilities to commit up to $100,000 and use TPEx data; 9/30/2014 Budget: BTO $ to date: $614,000 FEMP $ to date: $565,000 Other $ to date:

  6. Heat Exchangers for Solar Water Heating Systems | Department...

    Energy Savers [EERE]

    Heat Exchangers for Solar Water Heating Systems Heat Exchangers for Solar Water Heating Systems Image of a heat exchanger. | Photo from iStockphoto.com Image of a heat exchanger. |...

  7. Building Efficiency Technologies by Tomorrow’s Engineers and Researchers (BETTER) Capstone

    Broader source: Energy.gov [DOE]

    Lead Performer: Georgia Institute of Technology – Atlanta, GAPartners:  -   Alphabet Energy – Hayward, CA  -   Alabama Heat Exchangers, AL  -   Advanced Renewable Energy  -   Emrgy Hydro – Atlanta,...

  8. Technical Standards Newsletter - February 2016 | Department of Energy

    Office of Environmental Management (EM)

    16 Technical Standards Newsletter - February 2016 The Technical Standards Newsletter, February 2016 Inside this issue: New Technical Standard for Proficiency Testing DOE Technical Standards Updates Upcoming Meetings and Conferences PDF icon Technical Standards Newsletter - February 2016 More Documents & Publications Technical Standards Newsletter - October 2015 Technical Standards Newsletter - December 2014 Technical Standards Newsletter - April 2015

  9. Better Buildings Workforce Peer Exchange Quality Assurance Strategies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quality Assurance Strategies Better Buildings Workforce Peer Exchange Quality Assurance Strategies Better Buildings Workforce Peer Exchange Quality Assurance Strategies, call ...

  10. Technical Assessment Team Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Assessment Team Report Technical Assessment Team Report The Technical Assessment Team (TAT) is an independent team of technical experts that evaluated the mechanisms and chemical reactions contributing to the failure of a waste drum at the Waste Isolation Pilot Plant (WIPP). In its report, the TAT concluded that one drum, Drum 68660, was the source of radioactive contamination released during the February 14, 2014, radiological event at WIPP. PDF icon Technical Assessment Team Report

  11. CEEM Final Technical Report

    SciTech Connect (OSTI)

    Bowers, John

    2014-11-26

    The mission of the Center for Energy Efficient Materials (CEEM) was to serve the Department of Energy and the nation as a center of excellence dedicated to advancing basic research in nano-structured materials and devices for applications to solar electricity, thermoelectric conversion of waste heat to electricity, and solidstate lighting. The foundation of CEEM was based on the unique capabilities of UCSB and its partner institutions to control, synthesize, characterize, model, and apply materials at the nanoscale for more efficient sustainable energy resources. This unique expertise was a key source of the synergy that unified the research of the Center. Although the Center’s focus was basic research, It’s longer-term objective has been to transfer new materials and devices into the commercial sector where they will have a substantial impact on the nation’s need for efficient sustainable energy resources. As one measure of the impact of the Center, two start-up companies were formed based on its research. In addition, Center participants published a total of 210 archival journal articles, of which 51 were exclusively sponsored by the DOE grant. The work of the Center was structured around four specific tasks: Organic Solar Cells, Solid-State Lighting, Thermoelectrics, and High Efficiency Multi-junction Photovoltaic devices. A brief summary of each follows – detailed descriptions are in Sections 4 & 5 of this report. Research supported through CEEM led to an important shift with respect to the choice of materials used for the fabrication of solution deposited organic solar cells. Solution deposition opens the opportunity to manufacture solar cells via economically-viable high throughput tools, such as roll to roll printing. Prior to CEEM, most organic semiconductors utilized for this purpose involved polymeric materials, which, although they can form thin films reliably, suffer from batch to batch variations due to the statistical nature of the chemical reactions that produce them. In response, the CEEM team developed well-defined molecular semiconductors that produce active layers with very high power conversion efficiencies, in other words they can convert a very high fraction of sunlight into useful electrical power. The fact that the semiconductor is formed from molecular species provides the basis for circumventing the unreliability of polymer counterparts and, as an additional bonus, allows one to attain much grater insight into the structure of the active layer. The latter is particularly important because efficient conversion is the result of a complex arrangement of two semiconductors that need to phase separate in a way akin to oil and water, but with domains that are described by nanoscale dimensions. CEEM was therefore able to provide deep insight into the influence of nanostructure, through the application of structural characterization tools and theoretical methods that describe how electrical charges migrate through the organic layer. Our research in light emitting diode (LED)-based solid state lighting (SSL) was directed at improving efficiency and reducing costs to enable the widespread deployment of economically-viable replacements for inefficient incandescent, halogen, and fluorescent-based lighting. Our specific focus was to advance the fundamental science and technology of light emitting diodes to both understand factors that limit efficiencies and to provide innovative and viable solutions to the current impediments. One of the main challenges we faced is the decrease in efficiency when LEDs are driven harder to increase light output---the so called “droop” effect. It requires large emitting surfaces to reach a desired optical output, and necessitates the use of costly heat sinks, both of which increase the cost. We successfully reduced droop by growing LED crystals having non-conventional orientations. As recognized by the award of the 2014 Nobel prize to the inventors of the nitride LEDs (one of whom was a member of CEEM), LEDs already have a large societal impact in both developed (leading to large energy savings) and developing countries (bringing light where there is no electrical grid). The improvements in efficiency sought after in the CEEM project are key to a further impact of solid state lighting by LEDs with a projected doubling in efficiency by year 2020. Direct generation of electricity from heat has enormous promise for beneficial use of waste heat. But practical power generation directly from heat requires understanding and development of new and improved materials that will be more efficient and rugged than today’s thermoelectric materials. To accomplish this goal CEEM has synthesized five distinct and promising new classes of thermoelectric materials: (a) nanoparticle arrays that are effective in maximizing electric power generation and reducing detrimental loss of heat; (b) nitride and (c) oxide thermal electric materials that are effective at high temperatures where much beneficial heat is available; (d) arrays of silicon nano-wires that integrate thermal electricity generation into silicon-based electronics and materials; and (e) chemically synthesized nanostructured compounds that are cost effective, earth abundant, and environmentally friendly. The further development of these thermoelectric sources of electricity could have revolutionary impact for society in the recovery of waste heat from sources such as power plants and automobile exhaust, where there could be significant associated energy saving. It could even, in the future, provide disruptive alternatives and replacements for today’s internal combustion engines and could enable improved all-electric propulsion by the heat from shipboard nuclear reactors. The High Efficiency Multi-junction Photovoltaics task was a UCSB/NREL collaboration which bonded sub-cells from two different compound semiconductors material systems to make high efficiency multijunction solar cells for concentrating photovoltaic applications thathave substantially higher efficiency than single substrate cells made of elemental semiconductors such as silicon. This task required the development of new cell bonding methods with excellent coupling of both photons and electrons between the sub-cells. To accomplish this, we developed (1) GaInN solar cells with enhanced performance by using quantum-well absorbers and front-surface optical texturing, (2) a hybrid "pillar-array" bond which uses an array of metal pillars for electrical coupling, and (3) a "hybrid moth-eye" optical coating which combines the benefits of nano-imprinted moth-eye coatings and traditional multilayer coatings. The technical effectiveness was assessed by measurement of the photovoltaic efficiency of solar cells made using these techniques; the ultrahigh efficiencies targeted by this work are of compelling economic value for concentrating photovoltaics.

  12. Technical Exchange and Cooperation Arrangement Between the Department of Energy and the European Atomic Energy Community

    Office of Environmental Management (EM)

  13. Agenda for the December 15-16, 2015 - Technical Exchange Meeting...

    Office of Environmental Management (EM)

    Programs 8:00 - 8:45 am Cementitious Barrier Partnership Program Update, Dr. Kevin Brown (Vanderbilt) 8:45 - 9:15 am Summary of NWTRB Deep Borehole Disposal Workshop, Dr. Bret...

  14. External Technical Review Report for Small Column Ion Exchange Technology at Savannah River Site

    Office of Environmental Management (EM)

  15. Technical Exchange on Improved Design and Performance of High Level Waste Melters - Final Report

    SciTech Connect (OSTI)

    SK Sundaram; ML Elliott; D Bickford

    1999-11-19

    SIA Radon is responsible for management of low- and intermediate-level radioactive waste (LILW) produced in Central Russia. In cooperation with Minatom organizations Radon carries out R and D programs on treatment of simulated high level waste (HLW) as well. Radon scientists deal with a study of materials for LILW, HLW, and Nuclear Power Plants (NPP) wastes immobilization, and development and testing of processes and technologies for waste treatment and disposal. Radon is mostly experienced in LILW vitrification. This experience can be carried over to HLW vitrification especially in field of melting systems. The melter chosen as a basic unit for the vitrification plant is a cold crucible. Later on Radon experience in LILW vitrification as well as our results on simulated HLW vitrification are briefly described.

  16. Peer Exchange Call Summaries | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Peer Exchange Call Summaries Peer Exchange Call Summaries Use the sorting features below to locate and download summaries of past Peer Exchange Calls. Please check back periodically for additional summaries and learn more about upcoming calls. No. DATE TITLE TOPIC 1 2015/11/05 Baby It's Cold Outside: Best Practices for Chilly Climes (101) Program Design and Customer Experience 2 2015/10/22 Programs and Contractors - Top Tips for Successful Relationships! (101) Contractor Engagement and Workforce

  17. Technology Performance Exchange | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commercial Buildings » Analysis Tools » Technology Performance Exchange Technology Performance Exchange The Technology Performance Exchange(tm) (TPEx(tm)) is a Web-based portal that allows technology manufacturers, evaluators, utilities, consumers, modelers, and researchers to share building-related product energy performance data. The TPEx uses documents termed data entry forms to preemptively define the minimum product-specific energy performance characteristics necessary to evaluate a

  18. Exchange Visitors Program | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exchange Visitors Program Exchange Visitors Program The Department of Energy program offices engage in a variety of cooperative international exchanges and program initiatives which involve sponsoring foreign national professionals to work on projects in the U.S. The Office of Travel Management provides assistance to DOE Program Elements on employer-sponsored visa issues, and requirements. DOE J-1 Visas - provide foreign nationals with opportunities to participate in educational and cultural

  19. Workshop 2: Advanced HVAC&R Research Effort | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    convened two workshops to exchange ideas on the technical focus and overall structure and approach for the effort. The second workshop was held at the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) headquarters in Atlanta, Georgia, on December 8, 2015. This presentation was given at the workshop. VIEW THE PRESENTATION PDF icon Advanced HVAC&R Research Effort presentation More Documents & Publications R&D Opportunity Assessment: Joining

  20. Worldwide 'Power exchanges' | OpenEI Community

    Open Energy Info (EERE)

    Breakdown Structure Draft MHK LCOE Reporting Guidance Draft Worldwide 'Power exchanges' Hi Vanessa-I connected wit... 2013 projects and funding more Group members (24) Managers:...

  1. Heat transfer and heat exchangers reference handbook

    SciTech Connect (OSTI)

    Not Available

    1991-01-15

    The purpose of this handbook is to provide Rocky Flats personnel with an understanding of the basic concepts of heat transfer and the operation of heat exchangers.

  2. NETL's Energy Data eXchange

    ScienceCinema (OSTI)

    None

    2014-07-22

    A brief tour around NETL's Energy Data Exchange site, where researchers can upload data or look at data from another researcher.

  3. NETL's Energy Data eXchange

    SciTech Connect (OSTI)

    2014-07-16

    A brief tour around NETL's Energy Data Exchange site, where researchers can upload data or look at data from another researcher.

  4. Defense Technical Information Center thesaurus

    SciTech Connect (OSTI)

    Dickert, J.H.

    1996-10-01

    This DTIC Thesaurus provides a basic multidisciplinary subject term vocabulary used by DTIC to index and retrieve scientific and technical information from its various data bases and to aid DTIC`s users in their information storage and retrieval operations. It includes an alphabetical posting term display, a hierarchy display, and a Keywork Out of Context (KWOC) display.

  5. DOE FINAL TECHNICAL REPORT RP

    SciTech Connect (OSTI)

    RUSS PETERMAN

    2012-01-01

    The City of Georgetown Utility Systems (GUS) patnered with the private sector, the American Public Power Association (APPA) and Southwestern University to design, construct, test and monitor a solar co-generation system directly connected to the GUS electric distribution system. This report consists of the Primary Technical Report and 3 attachments.

  6. Mechanical Engineering Department technical review

    SciTech Connect (OSTI)

    Carr, R.B.; Abrahamson, L.; Denney, R.M.; Dubois, B.E

    1982-01-01

    Technical achievements and publication abstracts related to research in the following Divisions of Lawrence Livermore Laboratory are reported in this biannual review: Nuclear Fuel Engineering; Nuclear Explosives Engineering; Weapons Engineering; Energy Systems Engineering; Engineering Sciences; Magnetic Fusion Engineering; and Material Fabrication. (LCL)

  7. Hydrogen Delivery Technical Team Roadmap

    SciTech Connect (OSTI)

    2013-06-01

    The mission of the Hydrogen Delivery Technical Team (HDTT) is to enable the development of hydrogen delivery technologies, which will allow for fuel cell competitiveness with gasoline and hybrid technologies by achieving an as-produced, delivered, and dispensed hydrogen cost of $2-$4 per gallon of gasoline equivalent of hydrogen.

  8. Energy Materials Coordinating Committee (EMaCC). Annual technical report, Fiscal Year 2001

    SciTech Connect (OSTI)

    None, None

    2002-08-01

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations.

  9. OSTI, US Dept of Energy, Office of Scientific and Technical Information |

    Office of Scientific and Technical Information (OSTI)

    Speeding access to science information from DOE and Beyond Functions in Brief by Dr. Walt Warnick on Mon, Feb 9, 2009 OSTI is dedicated to the principle that to advance science, research must be shared. OSTI is increasingly recognized for its contributions to the sharing and exchange of scientific and technical information. OSTI works to accelerate discovery by speeding access to knowledge. OSTI's users conducted 80 million information transactions last year. Spreading responsibility for

  10. INTERNATIONAL ENVIRONMENTAL TECHNOLOGY IDENTIFICATION, DEVELOPMENT, DEMONSTRATION, DEPLOYMENT AND EXCHANGE

    SciTech Connect (OSTI)

    Roy C. Herndon

    2001-02-28

    Cooperative Agreement (DE-FC21-95EW55101) between the U.S. Department of Energy (DOE) and the Florida State University's Institute for International Cooperative Environmental Research (IICER) was designed to facilitate a number of joint programmatic goals of both the DOE and the IICER related to international technology identification, development, demonstration and deployment using a variety of mechanisms to accomplish these goals. These mechanisms included: laboratory and field research; technology demonstrations; international training and technical exchanges; data collection, synthesis and evaluation; the conduct of conferences, symposia and high-level meetings; and other appropriate and effective approaches. The DOE utilized the expertise and facilities of the IICER at Florida State University to accomplish its goals related to this cooperative agreement. The IICER has unique and demonstrated capabilities that have been utilized to conduct the tasks for this cooperative agreement. The IICER conducted activities related to technology identification, development, evaluation, demonstration and deployment through its joint centers which link the capabilities at Florida State University with collaborating academic and leading research institutions in the major countries of Central and Eastern Europe (e.g., Czech Republic, Hungary, Poland) and Russia. The activities and accomplishments for this five-year cooperative agreement are summarized in this Final Technical Report.

  11. Hydrogen and Fuel Cell Technical Advisory Committee

    SciTech Connect (OSTI)

    2012-03-21

    The Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) was established under Section 807 of the Energy Policy Act of 2005 to provide technical and programmatic advice to the Energy Secretary on DOE's hydrogen research, development, and demonstration efforts.

  12. Hydrogen isotopic exchange over palladium metal

    SciTech Connect (OSTI)

    Carstens, D.H.W.; Encinias, P.D.

    1990-01-01

    We have recently developed the laser-Raman technique as a means of unambiguously measuring the partial pressures of all possible hydrogen isotopes in the gas phase. Using this technique we have investigated the hydrogen-deuterium exchange in a number of metals. This report presents detailed data for isotopic exchange in the palladium hydride system over the temperature range 26{degree}C to -100{degree}C at a pressure of 7 atm. First order kinetic rate constants and activation energies are summarized for the forward (hydride to deuteride) and reverse (deuteride to hydride) exchange processes. In addition, we have found that small amounts (100 ppm) of impurities in the exchange gases considerably slow the exchange kinetics with the effect increasing down the series CH{sub 4}, CO{sub 2}, H{sub 2}O, and CO. 9 refs., 4 figs., 1 tab.

  13. Technical Position, Regarding Appropriate Accountable Sealed...

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications EA-1086: Final Environmental Assessment Radiological Control Technical Position, Regarding Surface Contamination Values for Alpha-Emitting...

  14. Previous Technical Assistance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Previous Technical Assistance Previous Technical Assistance The following are some Technical Assistance Work Products from 1998-2003. Sponsored Sample Products DOE co-funded report examines the current status of the U.S. Electric Transmission System. Report finds transmission capacity continues to be added at a slower rate than consumer demand is growing. Additional Program-Sponsored Sample Products The Electric Markets Technical Assistance Program is supporting efforts by the Western Governors'

  15. External Technical Review Report | Department of Energy

    Energy Savers [EERE]

    External Technical Review Report External Technical Review Report This document has been developed to guide individuals and teams who will be involved in External Technical Reviews (ETR) of U.S. Department of Energy's Office of Environmental Management (DOE-EM) projects. PDF icon External Technical Review Report More Documents & Publications Technology Readiness Assessment Report Compilation of ETR Summaries Major Risk Factors Integrated Facility Disposition Project - Oak Ridge

  16. External Technical Reviews | Department of Energy

    Energy Savers [EERE]

    Waste Management » Tank Waste and Waste Processing » External Technical Reviews External Technical Reviews Documents Available for Download November 15, 2012 External Technical Review Report This document has been developed to guide individuals and teams who will be involved in External Technical Reviews (ETR) of U.S. Department of Energy's Office of Environmental Management (DOE-EM) projects. September 1, 2011 Peer Review of the ASCEM Program 2010 Full Document and Summary Versions are

  17. Final Technical Report: Collaborative Research. Polymeric Muliferroics

    Office of Scientific and Technical Information (OSTI)

    (Technical Report) | SciTech Connect SciTech Connect Search Results Technical Report: Final Technical Report: Collaborative Research. Polymeric Muliferroics Citation Details In-Document Search Title: Final Technical Report: Collaborative Research. Polymeric Muliferroics The goal of this project is to investigate room temperature magnetism and magnetoelectric coupling of polymeric multiferroics. A new family of organic charge-transfer complexes has been emerged as a fascinating opportunity

  18. Cryogenic Technical Services Inc | Open Energy Information

    Open Energy Info (EERE)

    Technical Services Inc Place: Longmont, Colorado Zip: 805016036 Sector: Hydro, Hydrogen Product: Focused on cryogenic storage capability including hydrogen. Coordinates:...

  19. Field Communications Control Center Technical Organizational

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Field Communications Control Center Technical Organizational Operational Physical Security AuthenticatorsPasswords Network TopologyBackdoor and Vendor Connections Software...

  20. Space Conditioning Standing Technical Committee Strategic Plan

    Energy Savers [EERE]

    Space Conditioning Standing Technical Committee Strategic Plan, v2011a Revised: January 2012 Committee Chair: 2011 Eric Martin Janet McIlvaine BA-PIRC Standing Technical Committee Strategic Plan Overview Standing Technical Committees (STCs) focus on resolving key technical action items required to meet Building America performance goals. STC chairs lead each committees' activities in addressing specific research challenges, gaps in understanding, and new research opportunities. Committees

  1. Technical Reports & Briefs | Department of Energy

    Energy Savers [EERE]

    Technical Reports & Briefs Technical Reports & Briefs This page contains links to technical reports and briefs published by the U.S. Department of Energy, plus information on current studies under way. These reports are intended to present objective technical analysis based on the most recent, referenceable data available at the time of preparation of the reports. As new information becomes available, DOE will make efforts to update these studies as necessary. While coordinated with

  2. About Industrial Technical Assistance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Assistance » About Industrial Technical Assistance About Industrial Technical Assistance CHP System at Frito Lay facility in Killingly, Connecticut.<br /> <em>Photo courtesy of Energy Solutions Center.</em> CHP System at Frito Lay facility in Killingly, Connecticut. Photo courtesy of Energy Solutions Center. Industrial Technical Assistance supports the deployment of energy efficient manufacturing technologies and practices, including strategic energy management and

  3. UVIG Fall Technical Workshop | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    UVIG Fall Technical Workshop UVIG Fall Technical Workshop October 13, 2015 8:00AM PDT to October 15, 2015 5:00PM PDT San Diego, California The 2015 UVIG Fall Technical Workshop will provide attendees with an expanded perspective on the status of wind and solar integration and interconnection to utility systems in the United States and other countries. The technical workshop agenda focuses on a number of topics related to integration and interconnection of wind and solar generation. Events

  4. Energy Materials Coordinating Committee (EMaCC): Fiscal year 1996. Annual technical report

    SciTech Connect (OSTI)

    1997-08-01

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department`s materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. The EMaCC reports to the Director of the Office of Energy Research in his or her capacity as overseer of the technical programs of the Department. This annual technical report is mandated by the EMaCC terms of reference. This report summarizes EMaCC activities for FY 1996 and describes the materials research programs of various offices and divisions within the Department.

  5. Texas State Technical College Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    In Service Owner Texas State Technical College Developer Texas State Technical College Energy Purchaser Texas State Technical College Location Sweetwater TX Coordinates...

  6. Table III: Technical Targets for Catalyst Coated Membranes (CCMs...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    III: Technical Targets for Catalyst Coated Membranes (CCMs): Stationary Table III: Technical Targets for Catalyst Coated Membranes (CCMs): Stationary Technical targets for CCMs in ...

  7. NREL-Brazil Bilateral Technical Coordination | Open Energy Information

    Open Energy Info (EERE)

    Brazil Bilateral Technical Coordination Jump to: navigation, search Logo: NREL-Brazil Bilateral Technical Coordination Name NREL-Brazil Bilateral Technical Coordination Agency...

  8. DOE Technical Standards Archived Collection | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Technical Standards Program DOE Technical Standards Archived Collection DOE Technical Standards Archived Collection Document ID Filter Document ID sort descending Title Date ...

  9. Vehicle Technologies Office: US DRIVE Materials Technical Team...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    US DRIVE Materials Technical Team Roadmap Vehicle Technologies Office: US DRIVE Materials Technical Team Roadmap The Materials Technical Team (MTT) of the U.S. DRIVE Partnership ...

  10. Enforcement Letter, Babcock & Wilcox Technical Services Y-12...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Services Y-12, LLC - July 10, 2009 Enforcement Letter, Babcock & Wilcox Technical Services Y-12, LLC - July 10, 2009 July 10, 2009 Issued to Babcock & Wilcox Technical ...

  11. FreedomCAR and Fuel Partnership 2006 Highlights of Technical...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Highlights of Technical Accomplishments FreedomCAR and Fuel Partnership 2006 Highlights of Technical Accomplishments Report containing brief summaries of key technical...

  12. Technical Qualification Program Self-Assessment Report - Los...

    Energy Savers [EERE]

    4 Technical Qualification Program Self-Assessment Report - Los Alamos Field Office - FY14 The FY14 self-assessment of the Technical Qualifications Program and Federal Technical...

  13. Technical Qualification Program Self-Assessment Report - Los...

    Energy Savers [EERE]

    5 Technical Qualification Program Self-Assessment Report - Los Alamos Field Office - FY15 The FY15 self-assessment of the Technical Qualifications and Federal Technical Capabilit...

  14. Technical Qualification Program Self-Assessment Report - Los...

    Energy Savers [EERE]

    Site Office - 2013 Technical Qualification Program Self-Assessment Report - Los Alamos Site Office - 2013 This self-assessment of the Technical Qualifications and Federal Technical...

  15. Vehicle Technologies Office: U.S. DRIVE 2013 Technical Accomplishments...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. DRIVE 2013 Technical Accomplishments Report Vehicle Technologies Office: U.S. DRIVE 2013 Technical Accomplishments Report The U.S. DRIVE 2013 Highlights of Technical...

  16. Internal dosimetry technical basis manual

    SciTech Connect (OSTI)

    Not Available

    1990-12-20

    The internal dosimetry program at the Savannah River Site (SRS) consists of radiation protection programs and activities used to detect and evaluate intakes of radioactive material by radiation workers. Examples of such programs are: air monitoring; surface contamination monitoring; personal contamination surveys; radiobioassay; and dose assessment. The objectives of the internal dosimetry program are to demonstrate that the workplace is under control and that workers are not being exposed to radioactive material, and to detect and assess inadvertent intakes in the workplace. The Savannah River Site Internal Dosimetry Technical Basis Manual (TBM) is intended to provide a technical and philosophical discussion of the radiobioassay and dose assessment aspects of the internal dosimetry program. Detailed information on air, surface, and personal contamination surveillance programs is not given in this manual except for how these programs interface with routine and special bioassay programs.

  17. Technical Assistance Activities | Department of Energy

    Energy Savers [EERE]

    Activities Technical Assistance Activities AMO's Industrial Technical Assistance supports the deployment of manufacturing technologies and practices, including strategic energy management and combined heat and power, across American industry to increase productivity and reduce water and energy use. Technical Assistance Programs Better Plants Program Better Plants Challenge Superior Energy Performance Industrial Assessment Centers CHP Deployment Energy Resource Center Software Tools Training

  18. Technical Assistance Topics | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electricity Policy Coordination and Implementation » Electricity Policy Technical Assistance Program » Technical Assistance Topics Technical Assistance Topics Topics addressed are those of greatest interest to states, regions, and Tribes, including: Reliability, resiliency, and cyber security of electric power systems Electric resource planning, integrated resource planning, regional transmission planning, and resource acquisition strategies Ratepayer-funded energy efficiency, demand response,

  19. Technical Assistance Activities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Activities Technical Assistance Activities AMO's Industrial Technical Assistance supports the deployment of manufacturing technologies and practices, including strategic energy management and combined heat and power, across American industry to increase productivity and reduce water and energy use. Technical Assistance Programs Better Plants Program Better Plants Challenge Superior Energy Performance Industrial Assessment Centers CHP Deployment Energy Resource Center Software Tools Training

  20. Technical Proposal Disclosure Policy - ITER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proposal Disclosure Policy - ITER Pursuant to this solicitation, UT-Battelle will treat confidential proposal information as such and will disclose such information on a need to know basis to UT-Battelle employees and agents, DOE, and ITER- International Organization (ITER-IO) representatives for purposes of evaluation. It is hereby noted that any information distributed to ITER-IO will be of a technical nature; pricing information will not be distributed to ITER-IO.

  1. Hydrogen Storage Technical Team Roadmap

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrogen Storage Technologies Roadmap May Hydrogen Storage Technical Team Roadmap June 2013 This roadmap is a document of the U.S. DRIVE Partnership. U.S. DRIVE (Driving Research and Innovation for Vehicle efficiency and Energy sustainability) is a voluntary, non-binding, and nonlegal partnership among the U.S. Department of Energy; USCAR, representing Chrysler Group LLC, Ford Motor Company, and General Motors; Tesla Motors; five energy companies -BP America, Chevron Corporation, Phillips 66

  2. Hydrogen Production Technical Team Roadmap

    SciTech Connect (OSTI)

    2013-06-01

    The Hydrogen Production Technical Team Roadmap identifies research pathways leading to hydrogen production technologies that produce near-zero net greenhouse gas (GHG) emissions from highly efficient and diverse renewable energy sources. This roadmap focuses on initial development of the technologies, identifies their gaps and barriers, and describes activities by various U.S. Department of Energy (DOE) offices to address the key issues and challenges.

  3. Fuel Cell Technical Team Roadmap

    Energy Savers [EERE]

    Hydrogen Storage Technologies Roadmap Fuel Cell Technical Team Roadmap June 2013 This roadmap is a document of the U.S. DRIVE Partnership. U.S. DRIVE (Driving Research and Innovation for Vehicle efficiency and Energy sustainability) is a voluntary, non-binding, and nonlegal partnership among the U.S. Department of Energy; USCAR, representing Chrysler Group LLC, Ford Motor Company, and General Motors; Tesla Motors; five energy companies - BP America, Chevron Corporation, Phillips 66 Company,

  4. Implementation Standing Technical Committee Presentation

    Office of Environmental Management (EM)

    Implementation Standing Technical Committee (I-STC) Meeting Deane Evans (NJIT) and Stacy Hunt (Confluence), co-chairs March 1, 2012 What is the I-STC? * Focused on identifying and documenting key barriers and opportunities in implementation of Building America (BA) research results How Does the I-STC Work? * Fosters discussion and prioritization of key research activities * Documents these for DOE/NREL planning purposes 2012 Focus * Clarify key priorities and ensure proper prioritization *

  5. Lessons Learned: Peer Exchange Calls -- No. 4 | Department of Energy

    Office of Environmental Management (EM)

    4 Lessons Learned: Peer Exchange Calls -- No. 4 Better Buildings Residential Network Lessons Learned: Peer Exchange Calls, No. 4. PDF icon Lessons Learned: Peer Exchange Calls -- No. 4 More Documents & Publications Better Buildings Residential Network: Lessons Learned: Peer Exchange Calls Lessons Learned: Peer Exchange Calls -- No. 3 Better Buildings Network View | October 2015

  6. Lessons Learned: Peer Exchange Calls Fall 2014 | Department of Energy

    Office of Environmental Management (EM)

    Fall 2014 Lessons Learned: Peer Exchange Calls Fall 2014 Better Buildings Residential Network, Lessons Learned: Peer Exchange Calls Fall 2014. PDF icon Lessons Learned: Peer Exchange Calls More Documents & Publications Better Buildings Residential Network: Lessons Learned: Peer Exchange Calls Lessons Learned: Peer Exchange Calls -- No. 3 Better Buildings Network View | October 2014

  7. Skew chicane based betatron eigenmode exchange module

    DOE Patents [OSTI]

    Douglas, David

    2010-12-28

    A skewed chicane eigenmode exchange module (SCEEM) that combines in a single beamline segment the separate functionalities of a skew quad eigenmode exchange module and a magnetic chicane. This module allows the exchange of independent betatron eigenmodes, alters electron beam orbit geometry, and provides longitudinal parameter control with dispersion management in a single beamline segment with stable betatron behavior. It thus reduces the spatial requirements for multiple beam dynamic functions, reduces required component counts and thus reduces costs, and allows the use of more compact accelerator configurations than prior art design methods.

  8. Technical Standards Newsletter - April 2002 | Department of Energy

    Energy Savers [EERE]

    2 Technical Standards Newsletter - April 2002 The Standards Forum and Standards Actions - April 2002 Inside this issue: DOE Technical Standards Project Canceled............................................................................... 1 DOE Technical Standard Recently Sent for Coordination............................................................ 1 DOE Technical Standards Recently Published............................................................................... 2 American National

  9. Headquarters Facilities Master Security Plan- Chapter 9, Technical Surveillance Countermeasures

    Broader source: Energy.gov [DOE]

    2016 Headquarters Facilities Master Security Plan - Chapter 9, Technical Surveillance Countermeasures Describes the DOE Headquarters Technical Security Countermeasures (TSCM) Program.

  10. Building America Analysis Methods and Tools Standing Technical...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Analysis Methods and Tools Standing Technical Committee Presentation Building America Analysis Methods and Tools Standing Technical Committee Presentation This presentation...

  11. Technical Standards Newsletter- April 2008 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in Revision ... 1 *DOE Technical Standards Posted in RevCom for TSP ... 1 *DOE Technical Standards in Reaffirmation...

  12. Technical Standards Newsletter - July 2007 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in Revision ... 1 *DOE Technical Standards Posted in RevCom for TSP ... 1 *DOE Technical Standards in Reaffirmation...

  13. Department of Energy Technical Standards Program | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Technical Standards Program Department of Energy Technical Standards Program The DOE Technical Standards Program promotes the use of voluntary consensus standards at DOE, manages and facilitates DOE's efforts to develop and maintain necessary technical standards, and communicates information on technical standards activities to people who develop or use technical standards in DOE. Online Standards Approved DOE Technical Standards DOE Technical Standards Archive Monthly

  14. Lessons Learned: Peer Exchange Calls -- No. 3 | Department of Energy

    Office of Environmental Management (EM)

    3 Lessons Learned: Peer Exchange Calls -- No. 3 Lessons Learned: Peer Exchange Calls -- No. 3, as posted on the U.S. Department of Energy's Better Buildings Residential Network website. PDF icon Lessons Learned: Peer Exchange Calls -- No. 3 More Documents & Publications Lessons Learned: Peer Exchange Calls -- No. 4 Lessons Learned: Peer Exchange Calls Fall 2014 Better Buildings Residential Network: Lessons Learned: Peer Exchange Calls

  15. Heat Exchangers for Solar Water Heating Systems | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exchangers for Solar Water Heating Systems Heat Exchangers for Solar Water Heating Systems Image of a heat exchanger. | Photo from iStockphoto.com Image of a heat exchanger. | Photo from iStockphoto.com Solar water heating systems use heat exchangers to transfer solar energy absorbed in solar collectors to the liquid or air used to heat water or a space. Heat exchangers can be made of steel, copper, bronze, stainless steel, aluminum, or cast iron. Solar heating systems usually use copper,

  16. PVWatts Version 1 Technical Reference

    SciTech Connect (OSTI)

    Dobos, A. P.

    2013-10-01

    The NREL PVWatts(TM) calculator is a web application developed by the National Renewable Energy Laboratory (NREL) that estimates the electricity production of a grid-connected photovoltaic system based on a few simple inputs. PVWatts combines a number of sub-models to predict overall system performance, and makes several hidden assumptions about performance parameters. This technical reference details the individual sub-models, documents assumptions and hidden parameters, and explains the sequence of calculations that yield the final system performance estimation.

  17. Scientific and Technical Information Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-04-09

    To establish Department of Energy (DOE) requirements and responsibilities to ensure that scientific and technical information (STI) is identified, processed, disseminated, and preserved in a manner that (a) enables the scientific community and the public to locate and use the unclassified and unlimited STI resulting from DOE's research and related endeavors and (b) ensures access to classified and sensitive unclassified STI is protected according to legal or Departmental requirements. Cancels DOE O 241.1. Canceled by DOE O 241.1A Chg 1.

  18. EPA National Environmental Information Exchange Network Grant...

    Broader source: Energy.gov (indexed) [DOE]

    5 5:00PM EST U.S. Environmental Protection Agency The U.S. Environmental Protection Agency is accepting applications for the National Environmental Information Exchange Network...

  19. Offshore Energy Knowledge Exchange Workshop Report

    SciTech Connect (OSTI)

    none,

    2012-04-12

    A report detailing the presentations and topics discussed at the Offshore Energy Knowledge Exchange Workshop, an event designed to bring together offshore energy industry representatives to share information, best practices, and lessons learned.

  20. Energy Exchange 2015 Agenda at a Glance

    Broader source: Energy.gov [DOE]

    One page agenda at a glance for the Energy Exchange 2015, a two-and-a-half day training event that took place from August 11-13, 2015, at the Phoenix Convention Center in Phoenix, Arizona.

  1. Markets, distribution, and exchange after societal cataclysm

    SciTech Connect (OSTI)

    Cantor, R.A.; Henry, S.; Rayner, S.; Eastern Michigan Univ., Ypsilanti, MI . Dept. of Sociology; Oak Ridge National Lab., TN )

    1989-11-01

    The report identifies constraints and opportunities for the restoration of economic exchange following nuclear war. Four survival scenarios are postulated based on high or low levels of damage to (1) institutions that signal trading opportunities, reduce transaction costs, and regulate and enforce contracts, and (2) resources that are used to create and define wealth. The four scenarios are best case, worst case, resource abundance, and an institution intensive case. Three kinds of literature were reviewed, (1) the economics literature on formal markets, (2) the sociological literature on informal markets, and (3) the economic anthropology literature on pre-capitalist and pre-industrial exchange. From this corpus a set of non-market and market exchange structures are derived and rendered as rules vectors describing their operation. Each of the four survival scenarios is expounded as a subset of the possible exchange structures that is logically compatible with the constraints defining that scenario. 242 refs.

  2. A Thermoelectric Generator with an Intermediate Heat Exchanger...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Thermoelectric Generator with an Intermediate Heat Exchanger for Automotive Waste Heat Recovery System A Thermoelectric Generator with an Intermediate Heat Exchanger for...

  3. Proton Exchange Membrane Fuel Cells for Electrical Power Generation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Proton Exchange Membrane Fuel Cells for Electrical Power Generation On-Board Commercial Airplanes Proton Exchange Membrane Fuel Cells for Electrical Power Generation On-Board ...

  4. Minutes from the Print and Mail Managers Exchange Forum Teleconference...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Minutes from the Print and Mail Managers Exchange Forum Teleconferences Minutes from the Print and Mail Managers Exchange Forum Teleconferences Minutes from the Print and Mail...

  5. Better Buildings Residential Network: Lessons Learned: Peer Exchange...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Network: Lessons Learned: Peer Exchange Calls Better Buildings Residential Network: Lessons Learned: Peer Exchange Calls Better Buildings Residential Network: Lessons Learned: Peer...

  6. Emittance and Phase Space Exchange for Advanced Beam Manipulation...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Emittance and Phase Space Exchange for Advanced Beam Manipulation and Diagnostics Citation Details In-Document Search Title: Emittance and Phase Space Exchange for...

  7. Emittance and Phase Space Exchange (Conference) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Emittance and Phase Space Exchange Citation Details In-Document Search Title: Emittance and Phase Space Exchange You are accessing a document from the Department of Energy's...

  8. Validation of Hydrogen Exchange Methodology on Molecular Sieves...

    Office of Environmental Management (EM)

    Validation of Hydrogen Exchange Methodology on Molecular Sieves for Tritium Removal from Contaminated Water Validation of Hydrogen Exchange Methodology on Molecular Sieves for...

  9. Emittance exchange results (Conference) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Conference: Emittance exchange results Citation Details In-Document Search Title: Emittance exchange results You are accessing a document from the Department of Energy's (DOE)...

  10. Lessons Learned: Peer Exchange Calls -- No. 4 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Lessons Learned: Peer Exchange Calls -- No. 4 Better Buildings Residential Network Lessons Learned, Lessons Learned: Peer Exchange Calls, No. 4. PDF icon Lessons Learned: Peer...

  11. Lessons Learned: Peer Exchange Calls Fall 2014 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fall 2014 Lessons Learned: Peer Exchange Calls Fall 2014 Better Buildings Residential Network, Lessons Learned: Peer Exchange Calls Fall 2014. PDF icon Lessons Learned: Peer...

  12. Shanghai Environment and Energy Exchange | Open Energy Information

    Open Energy Info (EERE)

    Energy Exchange Jump to: navigation, search Name: Shanghai Environment and Energy Exchange Place: Shanghai Municipality, China Zip: 200083 Product: Trading platform for environment...

  13. Technical Standards Newsletter - November 2007 | Department of Energy

    Energy Savers [EERE]

    7 Technical Standards Newsletter - November 2007 DOE Technical Standards Program Document Status 10-29-2007 Inside This Issue: *DOE Standards Actions ............................ 1 *New Projects and Technical Standards in Revision ............................ 1 *DOE Technical Standards Posted in RevCom for TSP ............................ 1 *DOE Technical Standards in Reaffirmation ............................ 1 *DOE Technical Standards Change Notices ............................ 1 *DOE

  14. Technical Standards Newsletter - October 2006 | Department of Energy

    Energy Savers [EERE]

    6 Technical Standards Newsletter - October 2006 The Standards Forum and Standards Actions, Ocrober 2006 Inside This Issue: *DOE Standards Actions ............................ 1 *New Projects and Technical Standards in Revision ............................ 1 *DOE Technical Standards Posted in RevCom for TSP ............................ 1 *DOE Technical Standards in Reaffirmation ............................ 1 *DOE Technical Standards Change Notices ............................ 1 *DOE Technical

  15. Technical Standards Newsletter - October 2015 | Department of Energy

    Energy Savers [EERE]

    15 Technical Standards Newsletter - October 2015 The Technical Standards Newsletter, October 2015 Inside this issue: Suspect and Counterfeit Item Prevention Efforts DOE Technical Standards Updates Upcoming Meetings and Conferences PDF icon Technical Standards Newsletter - October 2015 More Documents & Publications Technical Standards Newsletter - December 2014 Technical Standards Newsletter - February 2016 Project Registration Number Assignments (Active)

  16. Progress Report for Diffusion Welding of the NGNP Process Application Heat Exchangers

    SciTech Connect (OSTI)

    R.E. Mizia; D.E. Clark; M.V. Glazoff; T.E. Lister; T.L. Trowbridge

    2011-12-01

    The U.S. Department of Energy selected the high temperature gas-cooled reactor as the basis for the Next Generation Nuclear Plant (NGNP). The NGNP will demonstrate the use of nuclear power for electricity, hydrogen production, and process heat applications. The NGNP Project is currently investigating the use of metallic, diffusion welded, compact heat exchangers to transfer heat from the primary (reactor side) heat transport system to the secondary heat transport system. An intermediate heat exchanger will transfer this heat to downstream applications such as hydrogen production, process heat, and electricity generation. The channeled plates that make up the heat transfer surfaces of the intermediate heat exchanger will have to be assembled into an array by diffusion welding. This report describes the preliminary results of a scoping study that evaluated the diffusion welding process parameters and the resultant mechanical properties of diffusion welded joints using Alloy 800H. The long-term goal of the program is to progress towards demonstration of small heat exchanger unit cells fabricated with diffusion welds. Demonstration through mechanical testing of the unit cells will support American Society of Mechanical Engineers rules and standards development, reduce technical risk, and provide proof of concept for heat exchanger fabrication methods needed to deploy heat exchangers in several potential NGNP configurations.1 Researchers also evaluated the usefulness of modern thermodynamic and diffusion computational tools (Thermo-Calc and Dictra) in optimizing the parameters for diffusion welding of Alloy 800H. The modeling efforts suggested a temperature of 1150 C for 1 hour with an applied pressure of 5 MPa using 15 {micro}m nickel foil as joint filler to reduce chromium oxidation on the welded surfaces. Good agreement between modeled and experimentally determined concentration gradients was achieved

  17. Heat exchanger for power generation equipment

    DOE Patents [OSTI]

    Nirmalan, Nirm Velumylm; Bowman, Michael John

    2005-06-14

    A heat exchanger for a turbine is provided wherein the heat exchanger comprises a heat transfer cell comprising a sheet of material having two opposed ends and two opposed sides. In addition, a plurality of concavities are disposed on a surface portion of the sheet of material so as to cause hydrodynamic interactions and affect a heat transfer rate of the turbine between a fluid and the concavities when the fluid is disposed over the concavities.

  18. Integrated Module Heat Exchanger | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Module Heat Exchanger Integrated Module Heat Exchanger 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting PDF icon ape047_bennion_2012_p.pdf More Documents & Publications Integrated Power Module Cooling Vehicle Technologies Office: 2008 Advanced Power Electronics and Electric Machinery R&D Annual Progress Report Power Electronic Thermal System Performance and Integration

  19. Energy Exchange Plenary Speakers | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Exchange Plenary Speakers Energy Exchange Plenary Speakers Opening Plenary Speakers Photo of David Friedman. David Friedman Principal Deputy Assistant Secretary for Energy Efficiency and Renewable Energy U.S. Department of Energy As Principal Deputy Assistant Secretary of the Office of Energy Efficiency and Renewable Energy (EERE), David Friedman helps manage day-to-day operations and oversee a broad technology portfolio designed to accelerate development and deployment of energy

  20. Energy Exchange Speaker Biographies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Speaker Biographies Energy Exchange Speaker Biographies Document offers an overview of each person speaking at the Energy Exchange, a two-and-a-half day training scheduled for August 11-13, 2015, at the Phoenix Convention Center in Phoenix, Arizona. PDF icon View the speaker biographies. More Documents & Publications Biomass 2014: Additional Speaker Biographies 2014 Program Management Workshop Speaker Biographies Bioenergy 2015 Speaker Biographies

  1. International technology exchange in support of the Defense Waste Processing Facility wasteform production

    SciTech Connect (OSTI)

    Kitchen, B.G.

    1989-08-23

    The nearly completed Defense Waste Processing Facility (DWPF) is a Department of Energy (DOE) facility at the Savannah River Site that is designed to immobilize defense high level radioactive waste (HLW) by vitrification in borosilicate glass and containment in stainless steel canisters suitable for storage in the future DOE HLW repository. The DWPF is expected to start cold operation later this year (1990), and will be the first full scale vitrification facility operating in the United States, and the largest in the world. The DOE has been coordinating technology transfer and exchange on issues relating to HLW treatment and disposal through bi-lateral agreements with several nations. For the nearly fifteen years of the vitrification program at Savannah River Laboratory, over two hundred exchanges have been conducted with a dozen international agencies involving about five-hundred foreign national specialists. These international exchanges have been beneficial to the DOE`s waste management efforts through confirmation of the choice of the waste form, enhanced understanding of melter operating phenomena, support for paths forward in political/regulatory arenas, confirmation of costs for waste form compliance programs, and establishing the need for enhancements of melter facility designs. This paper will compare designs and schedules of the international vitrification programs, and will discuss technical areas where the exchanges have provided data that have confirmed and aided US research and development efforts, impacted the design of the DWPF and guided the planning for regulatory interaction and product acceptance.

  2. International technology exchange in support of the Defense Waste Processing Facility wasteform production

    SciTech Connect (OSTI)

    Kitchen, B.G.

    1989-08-23

    The nearly completed Defense Waste Processing Facility (DWPF) is a Department of Energy (DOE) facility at the Savannah River Site that is designed to immobilize defense high level radioactive waste (HLW) by vitrification in borosilicate glass and containment in stainless steel canisters suitable for storage in the future DOE HLW repository. The DWPF is expected to start cold operation later this year (1990), and will be the first full scale vitrification facility operating in the United States, and the largest in the world. The DOE has been coordinating technology transfer and exchange on issues relating to HLW treatment and disposal through bi-lateral agreements with several nations. For the nearly fifteen years of the vitrification program at Savannah River Laboratory, over two hundred exchanges have been conducted with a dozen international agencies involving about five-hundred foreign national specialists. These international exchanges have been beneficial to the DOE's waste management efforts through confirmation of the choice of the waste form, enhanced understanding of melter operating phenomena, support for paths forward in political/regulatory arenas, confirmation of costs for waste form compliance programs, and establishing the need for enhancements of melter facility designs. This paper will compare designs and schedules of the international vitrification programs, and will discuss technical areas where the exchanges have provided data that have confirmed and aided US research and development efforts, impacted the design of the DWPF and guided the planning for regulatory interaction and product acceptance.

  3. Proton exchange membrane fuel cells for electrical power generation on-board commercial airplanes.

    SciTech Connect (OSTI)

    Curgus, Dita Brigitte; Munoz-Ramos, Karina; Pratt, Joseph William; Akhil, Abbas Ali; Klebanoff, Leonard E.; Schenkman, Benjamin L.

    2011-05-01

    Deployed on a commercial airplane, proton exchange membrane fuel cells may offer emissions reductions, thermal efficiency gains, and enable locating the power near the point of use. This work seeks to understand whether on-board fuel cell systems are technically feasible, and, if so, if they offer a performance advantage for the airplane as a whole. Through hardware analysis and thermodynamic and electrical simulation, we found that while adding a fuel cell system using today's technology for the PEM fuel cell and hydrogen storage is technically feasible, it will not likely give the airplane a performance benefit. However, when we re-did the analysis using DOE-target technology for the PEM fuel cell and hydrogen storage, we found that the fuel cell system would provide a performance benefit to the airplane (i.e., it can save the airplane some fuel), depending on the way it is configured.

  4. Proton Exchange Membrane Fuel Cells for Electrical Power Generation On-Board Commercial Airplanes

    SciTech Connect (OSTI)

    Pratt, Joesph W.; Klebanoff, Leonard E.; Munoz-Ramos, Karina; Akhil, Abbas A.; Curgus, Dita B.; Schenkman, Benjamin L.

    2011-05-01

    Deployed on a commercial airplane, proton exchange membrane fuel cells may offer emissions reductions, thermal efficiency gains, and enable locating the power near the point of use. This work seeks to understand whether on-board fuel cell systems are technically feasible, and, if so, if they offer a performance advantage for the airplane as a whole. Through hardware analysis and thermodynamic and electrical simulation, we found that while adding a fuel cell system using today’s technology for the PEM fuel cell and hydrogen storage is technically feasible, it will not likely give the airplane a performance benefit. However, when we re-did the analysis using DOE-target technology for the PEM fuel cell and hydrogen storage, we found that the fuel cell system would provide a performance benefit to the airplane (i.e., it can save the airplane some fuel), depending on the way it is configured.

  5. Technical Service Agreement (TSA) | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contract Research Technical Service Agreement (TSA) A technical service agreement facilitates small, short time-framed projects for a partner that does not involve research. These agreements may be utilized for data analysis, building a unique piece of equipment or other technical services where the expertise or unique capabilities of the Ames Laboratory are crucial. The boilerplate TSA agreement for non-proprietary work can be can be obtained here and the proprietary work can be obtained here.

  6. Research Projects Addressing Technical Challenges to Environmentally

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Acceptable Shale Gas Development Selected by DOE | Department of Energy Addressing Technical Challenges to Environmentally Acceptable Shale Gas Development Selected by DOE Research Projects Addressing Technical Challenges to Environmentally Acceptable Shale Gas Development Selected by DOE November 28, 2012 - 12:00pm Addthis Washington, DC - Fifteen research projects aimed at addressing the technical challenges of producing natural gas from shales and tight sands, while simultaneously

  7. Direct Technical Assistance | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Direct Technical Assistance Direct Technical Assistance Technical assistance is available to state, local, and tribal officials regarding the proposed EPA carbon pollution standards. The State and Local Solution Center helps states, local governments, and K-12 schools take clean energy to scale in their communities using a searchable database based on four key action areas or by topic and/or resource type. Action areas include in depth information on how to develop a clean energy strategy,

  8. Final Rule Technical Amendment | Department of Energy

    Office of Environmental Management (EM)

    Technical Amendment Final Rule Technical Amendment Federal Register Announcement: The Department of Energy (DOE) is publishing this technical amendment to the regulations for the loan guarantee program authorized by Section 1703 of Title XVII of the Energy Policy Act of 2005 (Title XVII) to incorporate, without substantive change, an amendment to Section 1702(b) of Title XVII enacted by Section 305 of the Consolidated Appropriations Act, 2012. PDF icon Loan Guarantees for Projects That Employ

  9. DOE Approved Technical Standards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Approved Technical Standards DOE Approved Technical Standards Document ID Filter Document ID sort descending Title Date DOE-HDBK-1001-96 Guide to Good Practices for Training and Qualification of Instructors This guide contains good practices for the training and qualification of technical instructors and instructional technologist at DOE reactor and non-reactor nuclear facilities. 05/15/1996 DOE-HDBK-1002-96 Guide to Good Practices for Training and Qualification of Chemical Operators The purpose

  10. Chapter_9_Technical_Surveillance_Countermeasures

    Office of Environmental Management (EM)

    9 Technical Surveillance Countermeasures This chapter covers the Technical Surveillance Countermeasures (TSCM) Program in place at DOE HQ to fulfill the requirements of DOE Manual 470.4-4A, Information Security Manual, Section D-Technical Surveillance Countermeasures (hereafter called the TSCM Manual), which is OUO and therefore is not available electronically through the DOE directives system website. A copy of the TSCM Manual is available through the Points of Contact listed below or by

  11. Memorandum, Technical Qualification Program Accreditation Incentives |

    Office of Environmental Management (EM)

    Department of Energy Technical Qualification Program Accreditation Incentives Memorandum, Technical Qualification Program Accreditation Incentives The National Nuclear Security Admin istration (NNSA) Technica l Qualification Program (TQP) was established as a process to ensure Federal technical employees possess the necessary knowledge, skills, and abilities to perform their assigned duties and responsibilities. The TQP enhances the ability of the NNSA and Department of Energy (DOE) to

  12. Solar Technical Assistance Team | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Assistance Team Solar Technical Assistance Team SunShot funds the work of the National Renewable Energy Laboratory's (NREL) Solar Technical Assistance Team (STAT). STAT leverages the expertise of NREL solar energy technology and deployment experts in order to provide information on solar policies, regulations, financing, and other issues for state and local government decision makers, so they develop best practices to deploy solar in their regions. STAT aims to help government decision

  13. Space Conditioning Standing Technical Committee Strategic Plan...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Committee Strategic Plan Space Conditioning Standing Technical Committee Strategic Plan This strategic plan document outlines the gaps, barriers, and opportunities identified by...

  14. FAQS Reference Guide – General Technical Base

    Office of Energy Efficiency and Renewable Energy (EERE)

    This reference guide addresses the competency statements in the December 2007 edition of DOE-STD-1146-2007, General Technical Base Functional Area Qualification Standard.

  15. International Linear Collider Technical Design Report - Volume...

    Office of Scientific and Technical Information (OSTI)

    Linear Collider Technical Design Report - Volume 2: Physics Baer, Howard; Barklow, Tim; Fujii, Keisuke; Gao, Yuanning; Hoang, Andre; Kanemura, Shinya; List, Jenny; Logan, Heather...

  16. Technical Standards Newsletter - August 2006 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    August 2006 Technical Standards Newsletter - August 2006 The Standards Forum and Standards Actions, August 2006 Inside This Isssue: DOE Standards Actions ......

  17. Electricity Policy Technical Assistance Program | Department...

    Energy Savers [EERE]

    Program Electricity Policy Technical Assistance Program Overview Since 2003, the U.S. Department of Energy's Office of Electricity Delivery and Energy Reliability (OE) has been...

  18. FEMP Launches New Technical Assistance Request Portal

    Broader source: Energy.gov [DOE]

    FEMP recently launched a new technical assistance request portal, which allows Federal agencies to submit and track requests for assistance for renewable energy projects.

  19. Sandia Energy - Concentrating Solar Power Technical Management...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Concentrating Solar Power Technical Management Position Home Renewable Energy Energy Facilities News Concentrating Solar Power Solar Job Listing National Solar Thermal Test...

  20. Laboratory Science Pillars & Strategic Context (Technical Report...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Laboratory Science Pillars & Strategic Context Citation Details In-Document Search Title: Laboratory Science Pillars & Strategic Context Authors: Sarrao, John...

  1. NETL Scientist Earns Prestigious Technical Achievement Award

    Broader source: Energy.gov [DOE]

    NETL's Dr. Ziomek-Moroz received a 2013 Technical Achievement Award from NACE International, the Corrosion Society,in recognition of her work in corrosion science.

  2. DOE Approved Technical Standards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    be used to develop or validate training programs for technical staff and managers at DOE nuclear facilities. Training programs based on the content of this guide should provide...

  3. Renewable Energy Interconnection and Storage - Technical Aspects...

    Open Energy Info (EERE)

    Interconnection and Storage - Technical Aspects Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Spain Installed Wind Capacity Website Focus Area: Renewable Energy...

  4. Water Heating Standing Technical Committee Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standing Technical Committee Water Heating Residential Energy Efficiency Stakeholder's Meeting February 29, 2012 - Austin, Texas 2 STC Chairman Responsibilities * To maintain the...

  5. Laboratory Science Pillars & Strategic Context (Technical Report...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Laboratory Science Pillars & Strategic Context Citation Details In-Document Search Title: Laboratory Science Pillars & Strategic Context You are accessing a...

  6. University of Alaska Fairbanks: Technical Design Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    University of Alaska Fairbanks Collegiate 2014 Technical Report 2 Table of Contents Turbine Overview ................................................................................................................................................. 3 Blade Design Techniques and Methods ......................................................................................................... 3 Hub Design Techniques and Methods

  7. Boiler Maximum Achievable Control Technology (MACT) Technical...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications CHP: A Technical & Economic Compliance Strategy - SEE Action Webinar, January 2012 Summary of EPA Final Rules for Air Toxic...

  8. International Linear Collider Technical Design Report - Volume...

    Office of Scientific and Technical Information (OSTI)

    Design Report - Volume 2: Physics Citation Details In-Document Search Title: International Linear Collider Technical Design Report - Volume 2: Physics You are accessing a ...

  9. Independent Oversight Review, Babcock & Wilcox Technical Services...

    Broader source: Energy.gov (indexed) [DOE]

    Long Lead Procurement Processed Used by Babcock & Wilcox Technical Services Y-12, LLC for the Uranium Processing Facility Project This report provides the results of an independent...

  10. Technical Position, Regarding Acceptable Methods for Assessing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Regarding Acceptable Methods for Assessing and Recording Radiation Doses to Individuals Technical Position, Regarding Acceptable Methods for Assessing and Recording Radiation Doses...

  11. Technical Services | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    analysis, tool and specialty design, and nuclear packaging. Process simulation, ergonomic design and analysis, and reverse engineering are also part of our core technical...

  12. APPA Engineering and Operations Technical Conference

    Broader source: Energy.gov [DOE]

    The 2014 APPA Engineering and Operations Technical Conference is designed for public power professionals charged with designing, developing, and maintaining the nation's electric system.

  13. Recreational Technical Assistance in Hydropower Licensing | Open...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: Recreational Technical Assistance in Hydropower LicensingPermittingRegulatory...

  14. Automated Home Energy Management Standing Technical Committee...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Alliance for Sustainable Energy, LLC. AHEM Standing Technical Committee Meeting Building America Stakeholder Meeting Lieko Earle and Bethany Sparn February 29, 2012 2 Role of ...

  15. Superconductivity, Glue, and the Pseudogap (Technical Report...

    Office of Scientific and Technical Information (OSTI)

    Technical Information Service, Springfield, VA at www.ntis.gov. Authors: Migliori, Albert 1 + Show Author Affiliations Los Alamos National Laboratory Los Alamos National...

  16. NREL: Technology Deployment - Solar Technical Assistance Team

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... and Program Technical Assistance Requested: Assistance on renewable energy regulatory considerations and financing options to inform net-positive solar energy community initiative. ...

  17. PPPL Technical Reports | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technical Reports - Disclaimer NSTX-U Education Organization Contact Us Overview Experimental Fusion Research Theoretical Fusion Research Basic Plasma Science Plasma Astrophysics...

  18. Enclosures Standing Technical Committee Strategic Plan report...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Committee Strategic Plan report Enclosures Standing Technical Committee Strategic Plan report This report outlines the research path for increasing energy efficiency of building...

  19. Superconductivity (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Superconductivity Citation Details In-Document Search Title: Superconductivity Authors: Maiorov, Boris A. 1 + Show Author Affiliations Los Alamos National ...

  20. Biomedical Applications of Microfluidic Technology (Technical...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Biomedical Applications of Microfluidic Technology Citation Details In-Document Search Title: Biomedical Applications of Microfluidic Technology Authors: Gao, Jun ...

  1. Enclosures Standing Technical Committee Strategic Plan report

    Broader source: Energy.gov [DOE]

    This report outlines the research path for increasing energy efficiency of building enclosures, as identified by the Building America Standing Technical Committee; updated Feb. 2012.

  2. Tank waste remediation systems technical baseline database

    SciTech Connect (OSTI)

    Porter, P.E.

    1996-10-16

    This document includes a cassette tape that contains Hanford generated data for the Tank Waste Remediation Systems Technical Baseline Database as of October 09, 1996.

  3. Technical Qualification Program Accreditation Schedule | Department...

    Broader source: Energy.gov (indexed) [DOE]

    TQP Accreditation Schedule More Documents & Publications Technical Qualification Program Self-Assessment Report - Nevada Site Office - 2009 FTCP Corrective Action Plan - Revision...

  4. Atlanta, Georgia: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Global Energy Holdings Group formerly Xethanol Corporation Navajo Wind Energy Plum Combustion Radiance Solar Servidyne SilvaGas Corporation FERCO Enterprises Inc Solar Systems...

  5. Atlanta Community Leaders' Institute Conference | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    economic development; housing; and health disparities and health issues, especially the combined effects of diabetes, hypertension, and obesity known as metabolic syndrome. Dr. ...

  6. Technical abstracts: Mechanical engineering, 1990

    SciTech Connect (OSTI)

    Broesius, J.Y.

    1991-03-01

    This document is a compilation of the published, unclassified abstracts produced by mechanical engineers at Lawrence Livermore National Laboratory (LLNL) during the calendar year 1990. Many abstracts summarize work completed and published in report form. These are UCRL-JC series documents, which include the full text of articles to be published in journals and of papers to be presented at meetings, and UCID reports, which are informal documents. Not all UCIDs contain abstracts: short summaries were generated when abstracts were not included. Technical Abstracts also provides descriptions of those documents assigned to the UCRL-MI (miscellaneous) category. These are generally viewgraphs or photographs presented at meetings. An author index is provided at the back of this volume for cross referencing.

  7. EA-179 California Power Exchange Corporation | Department of Energy

    Energy Savers [EERE]

    9 California Power Exchange Corporation EA-179 California Power Exchange Corporation Order authorizing Power Exchange Corporation to export electric energy to Mexico. PDF icon EA-179 California Power Exchange Corporation More Documents & Publications EA-184 Morgan Stanley Capital Group Inc. EA-176 Sempra Energy Trading Corporation

  8. Better Buildings Workforce Peer Exchange Quality Assurance Strategies

    Broader source: Energy.gov [DOE]

    Better Buildings Workforce Peer Exchange Quality Assurance Strategies, call slides and discussion summary, November 17, 2011.

  9. Nanoheterostructure Cation Exchange: Anionic Framework Conservation

    SciTech Connect (OSTI)

    Jain, Prashant K.; Amirav, Lilac; Aloni, Shaul; Alivisatos, A. Paul

    2010-05-11

    In ionic nanocrystals the cationic sub-lattice can be replaced with a different metal ion via a fast, simple, and reversible place-exchange, allowing post-synthetic modification of the composition of the nanocrystal, while preserving its size and shape. Here, we demonstrate for the first time that during such an exchange, the anionic framework of the crystal is preserved. When applied to nanoheterostructures, this phenomenon ensures that compositional interfaces within the heterostructure are conserved throughout the transformation. For instance, a morphology composed of a CdSe nanocrystal embedded in a CdS rod (CdSe/CdS) was exchanged to a PbSe/PbS nanorod via a Cu2Se/Cu2S structure. During every exchange cycle, the seed size and position within the nanorod were preserved, as evident by excitonic features, Z-contrast imaging, and elemental line-scans. Anionic framework conservation extends the domain of cation exchange to the design of more complex and unique nanostructures.

  10. Excitonic exchange splitting in bulk semiconductors

    SciTech Connect (OSTI)

    Fu, H.; Wang, L.; Zunger, A.

    1999-02-01

    We present an approach to calculate the excitonic fine-structure splittings due to electron-hole short-range exchange interactions using the local-density approximation pseudopotential method, and apply it to bulk semiconductors CdSe, InP, GaAs, and InAs. Comparing with previous theoretical results, the current calculated splittings agree well with experiments. Furthermore, we provide an approximate relationship between the short-range exchange splitting and the exciton Bohr radius, which can be used to estimate the exchange splitting for other materials. The current calculation indicates that a commonly used formula for exchange splitting in quantum dot is not valid. Finally, we find a very large pressure dependence of the exchange splitting: a factor of 4.5 increase as the lattice constant changes by 3.5{percent}. This increase is mainly due to the decrease of the Bohr radius via the change of electron effective mass. {copyright} {ital 1999} {ital The American Physical Society}

  11. Exchange bias mediated by interfacial nanoparticles (invited)

    SciTech Connect (OSTI)

    Berkowitz, A. E.; Sinha, S. K.; Fullerton, E. E.; Smith, D. J.

    2015-05-07

    The objective of this study on the iconic exchange-bias bilayer Permalloy/CoO has been to identify those elements of the interfacial microstructure and accompanying magnetic properties that are responsible for the exchange-bias and hysteretic properties of this bilayer. Both epitaxial and polycrystalline samples were examined. X-ray and neutron reflectometry established that there existed an interfacial region, of width ?1?nm, whose magnetic properties differed from those of Py or CoO. A model was developed for the interfacial microstructure that predicts all the relevant properties of this system; namely; the temperature and Permalloy thickness dependence of the exchange-bias, H{sub EX}, and coercivity, H{sub C}; the much smaller measured values of H{sub EX} from what was nominally expected; the different behavior of H{sub EX} and H{sub C} in epitaxial and polycrystalline bilayers. A surprising result is that the exchange-bias does not involve direct exchange-coupling between Permalloy and CoO, but rather is mediated by CoFe{sub 2}O{sub 4} nanoparticles in the interfacial region.

  12. Table IV: Technical Targets for Membranes: Stationary | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy IV: Technical Targets for Membranes: Stationary Table IV: Technical Targets for Membranes: Stationary "Technical targets for fuel cell membranes in stationary applications defined by the High Temperature Working Group (February 2003). " PDF icon technical_targets_membr_stat.pdf More Documents & Publications Table II: Technical Targets for Membranes: Automotive Table III: Technical Targets for Catalyst Coated Membranes (CCMs): Stationary Table I: Technical Targets for

  13. Federal Technical Capability Program (FTCP) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federal Technical Capability Program (FTCP) Federal Technical Capability Program (FTCP) Vision For DOE to be a technically proficient enterprise, with federal technical personnel overseeing Defense Nuclear Facilities in a manner that enables and enhances the DOE mission in a technically defensible fashion, while being recognized as preeminent in federal technical leadership and competency. Missions and Functions The Department of Energy is committed to developing and maintaining a technically

  14. NASPI Synchrophasor Technical Report Renewables Integration with Synchrophasors NASPI Technical Workshop

    Office of Environmental Management (EM)

    ii NASPI Synchrophasor Technical Report Renewables Integration with Synchrophasors NASPI Technical Workshop June 7, 2102 Workshop Technical Summary Context This technical material was developed in June 2012 by the North American SynchroPhasor Initiative (NASPI). NASPI is a collaboration between the North American electric industry (utilities, grid operators, vendors and consultants), the North American Electric Reliability Corporation, academics, and the U.S. Department of Energy, to advance and

  15. Effects of ionizing radiation on modern ion exchange materials

    SciTech Connect (OSTI)

    Marsh, S.F.; Pillay, K.K.S.

    1993-10-01

    We review published studies of the effects of ionizing radiation on ion exchange materials, emphasizing those published in recent years. A brief overview is followed by a more detailed examination of recent developments. Our review includes styrene/divinylbenzene copolymers with cation-exchange or anion-exchange functional groups, polyvinylpyridine anion exchangers, chelating resins, multifunctional resins, and inorganic exchangers. In general, strong-acid cation exchange resins are more resistant to radiation than are strong-base anion exchange resins, and polyvinylpyridine resins are more resistant than polystyrene resins. Cross-linkage, salt form, moisture content, and the surrounding medium all affect the radiation stability of a specific exchanger. Inorganic exchangers usually, but not always, exhibit high radiation resistance. Liquid ion exchangers, which have been used so extensively in nuclear processing applications, also are included.

  16. Modeling of Crystalline Silicotitanate Ion Exchange Columns

    SciTech Connect (OSTI)

    Walker, D.D.

    1999-03-09

    Non-elutable ion exchange is being considered as a potential replacement for the In-Tank Precipitation process for removing cesium from Savannah River Site (SRS) radioactive waste. Crystalline silicotitanate (CST) particles are the reference ion exchange medium for the process. A major factor in the construction cost of this process is the size of the ion exchange column required to meet product specifications for decontaminated waste. To validate SRS column sizing calculations, SRS subcontracted two reknowned experts in this field to perform similar calculations: Professor R. G. Anthony, Department of Chemical Engineering, Texas A&038;M University, and Professor S. W. Wang, Department of Chemical Engineering, Purdue University. The appendices of this document contain reports from the two subcontractors. Definition of the design problem came through several meetings and conference calls between the participants and SRS personnel over the past few months. This document summarizes the problem definition and results from the two reports.

  17. Miniaturized Air to Refrigerant Heat Exchangers

    Broader source: Energy.gov [DOE]

    This project is developing a miniaturized air-to-refrigerant heat exchanger that is more compact and more energy efficient than current market designs. The heat exchanger will feature at least 20% less volume, material volume, and approach temperature compared to current multiport flat tube designs, and it will be in production within five years. The heat exchanger, which acts as both an evaporator and a condenser, can be applied to commercial and residential air-conditioning or heat pump systems with various capacity scales. Prototype 1-kilowatt (kW) and 10 kW designs will be tested and then improved as necessary for final tests and demonstration in a 3-ton heat pump.

  18. Heat exchanger for coal gasification process

    DOE Patents [OSTI]

    Blasiole, George A.

    1984-06-19

    This invention provides a heat exchanger, particularly useful for systems requiring cooling of hot particulate solids, such as the separated fines from the product gas of a carbonaceous material gasification system. The invention allows effective cooling of a hot particulate in a particle stream (made up of hot particulate and a gas), using gravity as the motive source of the hot particulate. In a preferred form, the invention substitutes a tube structure for the single wall tube of a heat exchanger. The tube structure comprises a tube with a core disposed within, forming a cavity between the tube and the core, and vanes in the cavity which form a flow path through which the hot particulate falls. The outside of the tube is in contact with the cooling fluid of the heat exchanger.

  19. Modeling particle deposition on HVAC heat exchangers

    SciTech Connect (OSTI)

    Siegel, J.A.; Nazaroff, W.W.

    2002-01-01

    Fouling of fin-and-tube heat exchangers by particle deposition leads to diminished effectiveness in supplying ventilation and air conditioning. This paper explores mechanisms that cause particle deposition on heat exchanger surfaces. We present a model that accounts for impaction, diffusion, gravitational settling, and turbulence. Simulation results suggest that some submicron particles deposit in the heat exchanger core, but do not cause significant performance impacts. Particles between 1 and 10 {micro}m deposit with probabilities ranging from 1-20% with fin edge impaction representing the dominant mechanism. Particles larger than 10 {micro}m deposit by impaction on refrigerant tubes, gravitational settling on fin corrugations, and mechanisms associated with turbulent airflow. The model results agree reasonably well with experimental data, but the deposition of larger particles at high velocities is underpredicted. Geometric factors, such as discontinuities in the fins, are hypothesized to be responsible for the discrepancy.

  20. High-Performance Refrigerator Using Novel Rotating Heat Exchanger |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy High-Performance Refrigerator Using Novel Rotating Heat Exchanger High-Performance Refrigerator Using Novel Rotating Heat Exchanger Rotating heat exchangers installed in appliances and heat pumps have the potentially to reduce energy costs and refrigerant charge in a compact space. Rotating heat exchangers installed in appliances and heat pumps have the potentially to reduce energy costs and refrigerant charge in a compact space. Sandia-developed rotating heat exchanger

  1. Registration Now Open for Energy Exchange 2016 | Department of Energy

    Energy Savers [EERE]

    Registration Now Open for Energy Exchange 2016 Registration Now Open for Energy Exchange 2016 March 17, 2016 - 5:12pm Addthis Federal Energy Management Program Director Dr. Timothy Unruh presents to attendees at the 2015 Energy Exchange in Phoenix, Arizona. Federal Energy Management Program Director Dr. Timothy Unruh presents to attendees at the 2015 Energy Exchange in Phoenix, Arizona. Registration is now open for the Energy Exchange, which is scheduled for August 9-11, 2016, at the Rhode

  2. Building Energy Data Exchange Specification (BEDES) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Data Exchange Specification (BEDES) Building Energy Data Exchange Specification (BEDES) Building Energy Data Exchange Specification (BEDES) Overview The Building Energy Data Exchange Specification (BEDES, pronounced "beads" or /bi:ds/) is a dictionary of terms, definitions, and field formats which was created to help facilitate the exchange of information on building characteristics and energy use. It is intended to be used in tools and activities that help stakeholders make

  3. Designation Memo: Federal Technical Capability Panel Chairperson |

    Office of Environmental Management (EM)

    Department of Energy Federal Technical Capability Panel Chairperson Designation Memo: Federal Technical Capability Panel Chairperson May 4, 2007, the Deputy Secretary memorandum designating Karen Boardman the FTCP Chairperson. PDF icon Memo - Designating FTCP Chairperson More Documents & Publications FTCP Annual Report - Calendar Year 2008 FTCP Biennial Report - Calendar Years 2009-2010 Memorandum, Broader Consensual Listening

  4. Heat Exchanger With Internal Pin Elements

    DOE Patents [OSTI]

    Gerstmann, Joseph (Framingham, MA); Hannon, Charles L. (Arlington, MA)

    2004-01-13

    A heat exchanger/heater comprising a tubular member having a fluid inlet end, a fluid outlet end and plurality of pins secured to the interior wall of the tube. Various embodiments additionally comprise a blocking member disposed concentrically inside the pins, such as a core plug or a baffle array. Also disclosed is a vapor generator employing an internally pinned tube, and a fluid-heater/heat-exchanger utilizing an outer jacket tube and fluid-side baffle elements, as well as methods for heating a fluid using an internally pinned tube.

  5. Low exchange element for nuclear reactor

    DOE Patents [OSTI]

    Brogli, Rudolf H. (Aarau, CH); Shamasunder, Bangalore I. (Encinitas, CA); Seth, Shivaji S. (Encinitas, CA)

    1985-01-01

    A flow exchange element is presented which lowers temperature gradients in fuel elements and reduces maximum local temperature within high temperature gas-cooled reactors. The flow exchange element is inserted within a column of fuel elements where it serves to redirect coolant flow. Coolant which has been flowing in a hotter region of the column is redirected to a cooler region, and coolant which has been flowing in the cooler region of the column is redirected to the hotter region. The safety, efficiency, and longevity of the high temperature gas-cooled reactor is thereby enhanced.

  6. Improvements to Technical Specifications surveillance requirements

    SciTech Connect (OSTI)

    Lobel, R.; Tjader, T.R.

    1992-12-01

    In August 1983 an NRC task group was formed to investigate problems with surveillance testing required by Technical Specifications, and to recommend approaches to effect improvements. NUREG-1024 ( Technical Specifications-Enhancing Safety Impact'') resulted, and it contained recommendations to review the basis for test frequencies; to ensure that the tests promote safety and do not degrade equipment; and to review surveillance tests so that they do not unnecessarily burden personnel. The Technical Specifications Improvement Program (TSIP) was established in December 1984 to provide the framework for rewriting and improving the Technical Specifications. As an element of the TSIP, all Technical Specifications surveillance requirements were comprehensively examined as recommended in NUREG-1024. The results of that effort are presented in this report. The study found that while some testing at power is essential to verify equipment and system operability, safety can be improved, equipment degradation decreased, and unnecessary personnel burden relaxed by reducing the amount of testing at power.

  7. Competition and Reliability in North American Electricity Markets Technical

    Energy Savers [EERE]

    Workshop | Department of Energy Electricity Markets Technical Workshop Competition and Reliability in North American Electricity Markets Technical Workshop Competition and Reliability in North American Electricity Markets Technical Workshop PDF icon Competition and Reliability in North American Electricity Markets Technical Workshop More Documents & Publications The Relationship between Competitive Power Markets and Grid Reliability. Blackout 2003: Electric System Working Group Technical

  8. Technical Standards Newsletter - January 2012 | Department of Energy

    Energy Savers [EERE]

    January 2012 Technical Standards Newsletter - January 2012 The Standards Forum and Standards Actions, January 2012 Inside this issue: Featured DOE Technical Standards Activities DOE Conduct of Operations Standards Revisions New DOE Standards Projects DOE Handbook of Operational Safety and Analysis Techniques Nuclear Safety- Related Standards Activity PDF icon Technical Standards Newsletter - January 2012 More Documents & Publications Technical Standards Newsletter - April 2012 Technical

  9. Technical Standards Newsletter - October 1999 | Department of Energy

    Energy Savers [EERE]

    1999 Technical Standards Newsletter - October 1999 October 1999 The Standards Forum and Standards Actions, October 1999 The appropriate Technical Standards Managers (TSMs) will provide selected reviewers with copies for comment. PDF icon The Standards Forum and Standards Actions - October 1999 More Documents & Publications Technical Standards Newsletter - October 1999 Technical Standards Newsletter - November 1999 Technical Standards Newsletter - April 2000

  10. Technical Standards Newsletter - October 2001 | Department of Energy

    Energy Savers [EERE]

    1 Technical Standards Newsletter - October 2001 The Standards Forum and Standards Actions - October 2001 Inside this issue: DOE Technical Standards Projects Initiated.................................................. 1 DOE Technical Standards Recently Sent for Coordination............................ 1 DOE Technical Standards Recently Canceled............................................... 1 DOE Technical Standards Projects Discontinued.......................................... 2 American

  11. Technical Standards Newsletter- July 2006 | Department of Energy

    Energy Savers [EERE]

    Newsletter- July 2006 Technical Standards Newsletter- July 2006 The Standards Forum and Standards Actions, July 2006 Inside This Issue: *DOE Standards Actions ............................ 1 *New Projects and Technical Standards in Revision ............................ 1 *DOE Technical Standards Posted in RevCom for TSP ............................ 1 *DOE Technical Standards in Reaffirmation ............................ 1 *DOE Technical Standards Change Notices ............................ 1 *DOE

  12. Technical Standards Newsletter- May 2006 | Department of Energy

    Energy Savers [EERE]

    Newsletter- May 2006 Technical Standards Newsletter- May 2006 The Standards Forum and Standards Actions, May 2006 Inside This Issue: *DOE Standards Actions.......................................... 1 *New Projects and Technical Standards in Revision.......................................... 1 *DOE Technical Standards Posted in RevCom for TSP.......................................... 1 *DOE Technical Standards in Reaffirmation..........................................1 *DOE Technical Standards

  13. Fuel Cell Technologies Technical Publications | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Resources » Fuel Cell Technologies Technical Publications Fuel Cell Technologies Technical Publications Access technical information about hydrogen; fuel cells; safety, codes, and standards; hydrogen and fuel cell technology market analysis; and jobs and economic impacts resulting from fuel cell deployment. This information is provided in documents such as technical and project reports, conference proceedings and journal articles, technical presentations, and websites. Hydrogen

  14. Technical Standards Managers Contact List | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Standards Managers Contact List Technical Standards Managers Contact List October 2015 Contact list for Technical Standards Managers in DOE, Field offices and National Laboratories. PDF icon Technical Standards Managers Contact List, October 2015 More Documents & Publications All Active DOE Technical Standards Document Project Registration Number Assignments (Active) Active Project Justification Statement

  15. Final Scientific/Technical Report

    SciTech Connect (OSTI)

    Chang, Yale

    2014-07-01

    JHU/APL conducted solid propellant fire characterization tests in warm, humid, ambient conditions near sea level. Yttria and ceria surrogate materials were placed in the fires. The substrates simulating ground surfaces were concrete from a Kennedy Space Center launch pad, and steel covered with a protective ablative material representing a launch platform. In-situ instrumentation consisted of witness materials, thermocouples, air handlers, filters, and cascade impactors; remote instrumentation consisted of optical cameras and spectrometers. Test and analysis team members included the Naval Air Warfare Center Aircraft Division, Sandia National Laboratories (SNL), Alliant Techsystems, and the Johns Hopkins University. Test data were analyzed, reported, and delivered, including plume rise and transport captured on video. Derivation of the alumina particle size distributions formed the basis for condensing vapor and agglomeration estimates. Assessment of alumina mass in the plume, along with the surrogate fraction from filter forensics, provided an estimate of airborne surrogate mass. Technical interchange meetings were held with SNL and the Jet Propulsion Laboratory. Specifications for the fire environment were developed and delivered. A thermochemistry model that simultaneously provides the maximum temperature and heat flux was developed and delivered. An SPIE paper on 3D pyrometry of the fire was written and presented.

  16. 1990 Resource Program : Technical Report.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    1990-07-01

    This Technical Report is a detailed presentation of the actions Bonneville Power Administration (BPA) will take to develop new resources to meet the power requirements of its customers. The primary focus of this report is on what BPA will do in Fiscal Years (FY's) 1992 and 1993. However, much care has been taken to define near-term actions aimed at meeting BPA's long-term needs. An aggressive, steadily increasing conservation program forms the foundation of the 1990 Resource Program and resource acquisitions for FY's 1992 and 1993. BPA's commitment to a steady ramp-up of the conservation program is key to achieving the least-cost approach to resource development, and to making the conservation resource deliverable in the long run. By itself, conservation can meet much of the likely range of load growth that BPA faces. A diverse mix of generation resources in small increments is the second cornerstone of the 1990 Resource Program. These generation resources can meet the rest of the likely range of BPA resource needs. Finally, a Resource Contingency Plan prepares BPA to reliably meet load in the event that load growth exceeds the likely range. 14 figs., 27 tabs.

  17. Energy Materials Coordinating Committee (EMaCC) Fiscal Year 1999 annual technical report

    SciTech Connect (OSTI)

    2000-10-31

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department`s materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. This report summarizes EMaCC activities for FY 1999 and describes the materials research programs of various offices and divisions within the Department.

  18. Calorimetry exchange program. Annual report, 1988

    SciTech Connect (OSTI)

    Lyons, J.E.

    1988-12-31

    The goals of the Calorimetry Sample Program are: 1. Discuss measurement differences, 2. Review and improve analytical measurements and methods, 3. Discuss new measurement capabilities, 4. Provide data to DOE on measurement capabilities to evaluate shipper- receiver differences, 5. Provide characterized or standard materials as necessary for exchange participants, 6. Provide a measurement control program for plutonium analysis. A sample of PuO{sub 2} powder is available at each participating site for NDA measurement, including either or both calorimetry and high-resolution gamma-ray spectroscopy, the elements which are typically combined to provide a calorimetric assay of plutonium. The facilities measure the sample as frequently and to the level of precision which they desire, and then submit the data to the Exchange for analysis. Statistical tests are used to evaluate the data and to determine if there are significant differences from accepted values for the exchange or from data previously reported by that facility. Data included in this report is a compilation of all exchange data received in 1988. Since a large number of data points were recorded, a change was made to the analysis method to account for the uncertainty in the accepted values.

  19. Ion exchange polymers for anion separations

    DOE Patents [OSTI]

    Jarvinen, Gordon D.; Marsh, S. Fredric; Bartsch, Richard A.

    1997-01-01

    Anion exchange resins including at least two positively charged sites and a ell-defined spacing between the positive sites are provided together with a process of removing anions or anionic metal complexes from aqueous solutions by use of such resins. The resins can be substituted poly(vinylpyridine) and substituted polystyrene.

  20. Ion exchange polymers for anion separations

    DOE Patents [OSTI]

    Jarvinen, G.D.; Marsh, S.F.; Bartsch, R.A.

    1997-09-23

    Anion exchange resins including at least two positively charged sites and a well-defined spacing between the positive sites are provided together with a process of removing anions or anionic metal complexes from aqueous solutions by use of such resins. The resins can be substituted poly(vinylpyridine) and substituted polystyrene.