National Library of Energy BETA

Sample records for t-cbm con ley

  1. abstract-ley

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Interfaces - TRANSIMS Studio and the RTE Run Time Environment Hubert Ley Transportation Research and Analysis Computing Center Argonne National Laboratory List of Authors ================ Hubert Ley Transportation Research and Analysis Computing Center Argonne National Laboratory 277 International Drive West Chicago, IL 60185 Abstract ========= TRACC has been tasked by USDOT to advance the use of TRANSIMS by providing computing resources and expertise to the US transportation modeling

  2. Hubert Ley | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hoyt Battey About Us Hoyt Battey - Market Acceleration and Deployment Program Manager, Wind and Water Power Technologies Office Most Recent A Warm Weather Win-Win: Summer Fun and Clean Energy with Hydropower Dams June 24 Hydropower Still in the Mix April 27 Making Hydropower More Eco-Friendly October 22

    Hubert Ley Hubert Ley Director, Transportation Research and Analysis Computing Center (TRACC) E-mail hley

  3. Awesome Con

    Broader source: Energy.gov [DOE]

    Awesome Con will be held June 3–5, 2016, at the Walter E. Washington Convention Center in Washington, D.C. The annual conference gathers pop culture, gaming, and comic book enthusiasts from across the country for a weekend full of panels, exhibits, and meet-and-greet opportunities with celebrities. This year, the event will highlight energy efficiency and renewable energy innovation from the U.S. Department of Energy at the inaugural Awesome Con Science Fair. Bioenergy Technologies Office Program Manager Alison Goss Eng will be participating in the “From Four Colors to Fact: Science and the Comics” panel, which will explore the science behind some of today’s most popular movies, comic books, and superheroes. The Energy Department will also have a booth in the exhibit hall where visitors can learn more about the science and innovation that it supports.

  4. Con Edison Energy Storage Activities

    U.S. Energy Information Administration (EIA) Indexed Site

    Con Edison Energy Storage Activities June 15, 2015 EIA Conference Con Edison Energy Storage (ES) 2 Presentation Overview * Introduction to Con Edison * Potential benefits of storage on our system * Unique urban challenges * Con Edison storage related activities * Going forward Con Edison: Overview 3 Customers Infrastructure Service Territory Electric 3.4 million One of the worlds largest underground electric systems All 5 boroughs of NYC and Westchester County Gas 1.1 million 4,333 miles of gas

  5. GovCon Holiday Soiree

    Broader source: Energy.gov [DOE]

    The 6th Annual GovCon Holiday Soiree will be held at the Kennedy Center on Monday, December 8, from 5:30pm to 7:30pm. The event is expected to bring together more than 200 representatives of women-...

  6. Property:Ind cons | Open Energy Information

    Open Energy Info (EERE)

    the property "Ind cons" Showing 25 pages using this property. (previous 25) (next 25) 4 4-County Electric Power Assn (Mississippi) EIA Revenue and Sales - April 2008 + 20 +...

  7. Property:Com cons | Open Energy Information

    Open Energy Info (EERE)

    the property "Com cons" Showing 25 pages using this property. (previous 25) (next 25) 4 4-County Electric Power Assn (Mississippi) EIA Revenue and Sales - April 2008 + 8,105 +...

  8. Property:Res cons | Open Energy Information

    Open Energy Info (EERE)

    the property "Res cons" Showing 25 pages using this property. (previous 25) (next 25) 4 4-County Electric Power Assn (Mississippi) EIA Revenue and Sales - April 2008 + 35,751 +...

  9. ConSol (Building Industry Research Alliance) | Open Energy Information

    Open Energy Info (EERE)

    ConSol (Building Industry Research Alliance) Jump to: navigation, search Name: ConSol (Building Industry Research Alliance) Place: Stockton, CA Website: www.consol.com References:...

  10. Air-Con International: Noncompliance Determination and Proposed...

    Energy Savers [EERE]

    Air-Con International: Noncompliance Determination and Proposed Penalty (2010-SE-0301) Air-Con International: Noncompliance Determination and Proposed Penalty (2010-SE-0301) ...

  11. Oregon Trail El Cons Coop, Inc | Open Energy Information

    Open Energy Info (EERE)

    El Cons Coop, Inc Jump to: navigation, search Name: Oregon Trail El Cons Coop, Inc Place: Oregon Phone Number: Baker County: 541-523-3616; Harney: 541-573-2666; Grant:...

  12. ConInvest GmbH | Open Energy Information

    Open Energy Info (EERE)

    ConInvest GmbH Jump to: navigation, search Name: ConInvest GmbH Place: Berlin, Berlin, Germany Zip: 10787 Product: The company is mainly investing in biogas projects in Germany....

  13. Air-Con International: Order (2010-SE-0301)

    Broader source: Energy.gov [DOE]

    DOE ordered Air-Con International, Inc. to pay a $10,000 civil penalty after finding Air-Con had imported and distributed in commerce in the U.S. various models of air-conditioning units.

  14. Air-Con International: Noncompliance Determination and Proposed Penalty

    Energy Savers [EERE]

    (2010-SE-0301) | Department of Energy Air-Con International: Noncompliance Determination and Proposed Penalty (2010-SE-0301) Air-Con International: Noncompliance Determination and Proposed Penalty (2010-SE-0301) September 20, 2010 DOE issued a Notice of Noncompliance Determination to Air-Con International finding that a variety of central air conditioners and air conditioning heat pumps distributed under the Air-Con private label do not comport with the energy conservation standards. DOE

  15. Technical Qualification Program Accreditation Pros and Cons | Department of

    Energy Savers [EERE]

    Energy Pros and Cons Technical Qualification Program Accreditation Pros and Cons Business Case for Accreditation Incentives - Challenge the Enterprise to Foster Confidence and Support of TQP Accreditation TQP Accreditation Lessons Learned PDF icon TQP Accreditation Pros and Cons More Documents & Publications Technical Qualification Program Reaccreditation Report - Y-12 Site Office Technical Qualification Program Reaccreditation Report - Sandia Site Office Technical Qualification Program

  16. Case Study - Con Edison Smart Grid Investment Grant

    Energy Savers [EERE]

    New York City with more reliable and affordable power, Con Edison is upgrading its distribution system to reduce the frequency and duration of outages and improve power quality. ...

  17. Bi-Con Services Inc | Open Energy Information

    Open Energy Info (EERE)

    Services Inc Jump to: navigation, search Name: Bi-Con Services Inc Address: 10901 Clay Pike Road Place: Derwent, Ohio Zip: 43733 Sector: Buildings, Efficiency, Services Product:...

  18. ConEd (Electric)- Residential Energy Efficiency Incentives Program

    Broader source: Energy.gov [DOE]

    Additionally, rebates are provided for certain appliances. View the program web site for eligibility and instructions on how to have a secondary, working unit picked up. Contact Con Edison for...

  19. ConEd (Electric)- Multifamily Energy Efficiency Incentives Program

    Broader source: Energy.gov [DOE]

    Con Edison offers New York Multifamily electric customers a rebate program for energy efficient cooling and lighting equipment in 5-75 unit buildings in the eligible service area. All equipment...

  20. Energy @ Awesome Con: Meet Our Panelists | Department of Energy

    Office of Environmental Management (EM)

    and cinema at Awesome Con. Have a question for our panelists? Post it on Twitter, Facebook, Google+ using AskEnergy or email it to newmedia@hq.doe.gov. Energy is awesome....

  1. Air-Con International: Order (2010-SE-0301)

    Broader source: Energy.gov [DOE]

    DOE ordered Air-Con International, Inc. to pay a civil penalty of $10,000 after finding Air-Con had distributed in commerce in the U.S. central air conditioning units that were not in conformity with the applicable energy conservation standards. DOE also found that, while some units were exported, none of the units were properly marked as imports intended for exportation.

  2. DOE Requires Air-Con International to Cease Sales of Inefficient...

    Energy Savers [EERE]

    Air-Con International to Cease Sales of Inefficient Air Conditioners and Proposes Penalties DOE Requires Air-Con International to Cease Sales of Inefficient Air Conditioners and ...

  3. Air-Con Agrees to Pay Civil Penalty to Resolve Enforcement Action |

    Energy Savers [EERE]

    Department of Energy Air-Con Agrees to Pay Civil Penalty to Resolve Enforcement Action Air-Con Agrees to Pay Civil Penalty to Resolve Enforcement Action November 23, 2010 - 6:34pm Addthis The Department of Energy has settled the civil penalty action it initiated against Air-Con International for Air-Con's sale of air conditioners in the United States that used more energy than allowed by federal law. On September 20, 2010, based on Air-Con's responses to a DOE subpoena, DOE ordered Air-Con

  4. DOE Requires Air-Con International to Cease Sales of Inefficient Air Conditioners and Proposes Penalties

    Broader source: Energy.gov [DOE]

    The Department has issued a Notice of Noncompliance Determination and Proposed Civil Penalty to Air-Con, International, requiring Air-Con to cease the sale of certain air-conditioning systems in...

  5. DOE Takes Action to Stop the Sales of Air-Con Air Conditioner Models Shown

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to Violate Federal Energy Efficiency Appliance Standards | Department of Energy Action to Stop the Sales of Air-Con Air Conditioner Models Shown to Violate Federal Energy Efficiency Appliance Standards DOE Takes Action to Stop the Sales of Air-Con Air Conditioner Models Shown to Violate Federal Energy Efficiency Appliance Standards September 23, 2010 - 12:00am Addthis Washington, DC - The Department of Energy announced today that it has taken action against Air-Con, International, requiring

  6. ConEd (Gas)- Multi-family Energy Efficiency Incentives Program

    Broader source: Energy.gov [DOE]

    Con Edison offers a free energy audit and rebates for Multifamily buildings. Incentives are offered for energy efficient heating equipment for 5-75 unit buildings in the eligible service area....

  7. SLUDGE PARTICLE SEPAPATION EFFICIENCIES DURING SETTLER TANK RETRIEVAL INTO SCS-CON-230

    SciTech Connect (OSTI)

    DEARING JI; EPSTEIN M; PLYS MG

    2009-07-16

    The purpose of this document is to release, into the Hanford Document Control System, FA1/0991, Sludge Particle Separation Efficiencies for the Rectangular SCS-CON-230 Container, by M. Epstein and M. G. Plys, Fauske & Associates, LLC, June 2009. The Sludge Treatment Project (STP) will retrieve sludge from the 105-K West Integrated Water Treatment System (IWTS) Settler Tanks and transfer it to container SCS-CON-230 using the Settler Tank Retrieval System (STRS). The sludge will enter the container through two distributors. The container will have a filtration system that is designed to minimize the overflow of sludge fines from the container to the basin. FAI/09-91 was performed to quantify the effect of the STRS on sludge distribution inside of and overflow out of SCS-CON-230. Selected results of the analysis and a system description are discussed. The principal result of the analysis is that the STRS filtration system reduces the overflow of sludge from SCS-CON-230 to the basin by roughly a factor of 10. Some turbidity can be expected in the center bay where the container is located. The exact amount of overflow and subsequent turbidity is dependent on the density of the sludge (which will vary with location in the Settler Tanks) and the thermal gradient between the SCS-CON-230 and the basin. Attachment A presents the full analytical results. These results are applicable specifically to SCS-CON-230 and the STRS filtration system's expected operating duty cycles.

  8. Department of Energy Opens Appliance Standards Investigation for Certain Air Con International Air Conditioners and Heat Pumps

    Broader source: Energy.gov [DOE]

    WASHINGTON, DC - The U.S. Department of Energy announced today that it has opened an investigation to determine whether certain air conditioners and heat pump products manufactured by Air Con...

  9. Reversible CO Binding Enables Tunable CO/H2 and CO/N2 Separations in

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Metal-Organic Frameworks with Exposed Divalent Metal Cations | Center for Gas SeparationsRelevant to Clean Energy Technologies | Blandine Jerome Reversible CO Binding Enables Tunable CO/H2 and CO/N2 Separations in Metal-Organic Frameworks with Exposed Divalent Metal Cations Previous Next List Eric D. Bloch, Matthew R. Hudson, Jarad A. Mason, Sachin Chavan, Valentina Crocellà, Joshua D. Howe, Kyuho Lee, Allison L. Dzubak, Wendy L. Queen, Joseph M. Zadrozny, Stephen J. Geier, Li-Chiang Lin,

  10. Characterization Data Package for Containerized Sludge Samples Collected from Engineered Container SCS-CON-210

    SciTech Connect (OSTI)

    Fountain, Matthew S.; Fiskum, Sandra K.; Baldwin, David L.; Daniel, Richard C.; Bos, Stanley J.; Burns, Carolyn A.; Carlson, Clark D.; Coffey, Deborah S.; Delegard, Calvin H.; Edwards, Matthew K.; Greenwood, Lawrence R.; Neiner, Doinita; Oliver, Brian M.; Pool, Karl N.; Schmidt, Andrew J.; Shimskey, Rick W.; Sinkov, Sergey I.; Snow, Lanee A.; Soderquist, Chuck Z.; Thompson, Christopher J.; Trang-Le, Truc LT; Urie, Michael W.

    2013-09-10

    This data package contains the K Basin sludge characterization results obtained by Pacific Northwest National Laboratory during processing and analysis of four sludge core samples collected from Engineered Container SCS-CON-210 in 2010 as requested by CH2M Hill Plateau Remediation Company. Sample processing requirements, analytes of interest, detection limits, and quality control sample requirements are defined in the KBC-33786, Rev. 2. The core processing scope included reconstitution of a sludge core sample distributed among four to six 4-L polypropylene bottles into a single container. The reconstituted core sample was then mixed and subsampled to support a variety of characterization activities. Additional core sludge subsamples were combined to prepare a container composite. The container composite was fractionated by wet sieving through a 2,000 micron mesh and a 500-micron mesh sieve. Each sieve fraction was sampled to support a suite of analyses. The core composite analysis scope included density determination, radioisotope analysis, and metals analysis, including the Waste Isolation Pilot Plant Hazardous Waste Facility Permit metals (with the exception of mercury). The container composite analysis included most of the core composite analysis scope plus particle size distribution, particle density, rheology, and crystalline phase identification. A summary of the received samples, core sample reconstitution and subsampling activities, container composite preparation and subsampling activities, physical properties, and analytical results are presented. Supporting data and documentation are provided in the appendices. There were no cases of sample or data loss and all of the available samples and data are reported as required by the Quality Assurance Project Plan/Sampling and Analysis Plan.

  11. 1. CON'I'AC'r ID CODE PAGE OF PAGES AMENDMENT OF SOLICITATIONIMODIFICATION OF CONTRACT II 11 3

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CON'I'AC'r ID CODE PAGE OF PAGES AMENDMENT OF SOLICITATIONIMODIFICATION OF CONTRACT II 11 3 2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE (M/D.'F) 4. REQUISITION/PURCHASE RE-Q. NO. S. PROJECT1 NO. t7fapplieoble) 27See Block 16C 12EM001839 6. ISUED13Y ODE7. ADMINISTER.ED BY (If uI/wr ius /tem 6) CODE U.S. Department of Energy Office or River Protection P. 0. Box 450, MS 146-60 Richland, WA 99352 1. NAME AND ADDRESS OF CONTRACTOR (No.,stree, county State and Z11' code) 9A, AMENDMEN f

  12. Browse by Discipline -- E-print Network Subject Pathways: Computer...

    Office of Scientific and Technical Information (OSTI)

    ... Adrian - School of Operations Research and Industrial Engineering) - School of Operations Research and Industrial Engineering, Cornell University Ley, Olivier (Olivier Ley) - ...

  13. Property:Oth cons | Open Energy Information

    Open Energy Info (EERE)

    Illinois Pub Serv Co (Illinois) EIA Revenue and Sales - September 2008 + 1 + City of Detroit (Michigan) EIA Revenue and Sales - April 2008 + 1 + City of Detroit (Michigan) EIA...

  14. Property:Tot cons | Open Energy Information

    Open Energy Info (EERE)

    + 4-County Electric Power Assn (Mississippi) EIA Revenue and Sales - December 2008 + 44,709 + 4-County Electric Power Assn (Mississippi) EIA Revenue and Sales - February 2008 +...

  15. ConEdison Solutions | Open Energy Information

    Open Energy Info (EERE)

    Place: White Plains, New York Zip: 10604 Region: Northeast - NY NJ CT PA Area Sector: Services Product: Green Power Marketer Website: conedisonsolutions.com Coordinates:...

  16. Cons rcio Novo Gramacho | Open Energy Information

    Open Energy Info (EERE)

    Place: Rio de Janeiro, Rio de Janeiro, Brazil Product: Brazilian company that owns a biogas plant in Rio de Janeiro. References: Consrcio Novo Gramacho1 This article is a...

  17. GasCon | Open Energy Information

    Open Energy Info (EERE)

    and economic calculations and project implementation and management. Coordinates: 56.241001, 9.54807 Show Map Loading map... "minzoom":false,"mappingservice":"googlemap...

  18. Pros and cons of hydraulic drilling

    SciTech Connect (OSTI)

    Not Available

    1984-06-01

    The advantages and disadvantages of using hydraulic drilling are discussed. The low maintenance, energy efficiency, drilling speeds, and operating costs are the main advantages of the hydraulic drills. The economics and maintenance of air drills are also compared.

  19. FuelCon AG | Open Energy Information

    Open Energy Info (EERE)

    Place: Magdeburg-Barleben, Germany Zip: 39179 Product: A leading developer of fuel cell test equipment. Their products include test systems for individual cells, stacks, reformers,...

  20. Consolidated Edison Company of New York (Con Edison) | Open Energy...

    Open Energy Info (EERE)

    Place Place: New York, New York Zip: 10003 Region: Northeast - NY NJ CT PA Area Sector: Services Product: Green Power Marketer Website: www.coned.com Coordinates: 40.7341329,...

  1. ConEd (Gas)- Commercial and Industrial Energy Efficiency Program

    Broader source: Energy.gov [DOE]

    The Commercial and Industrial Equipment Rebate and Commercial and Industrial Custom Efficiency Programs offer incentives to gas customers in good standing who contribute to the system benefits...

  2. ConEd (Electric)- Commercial and Industrial Energy Efficiency Program

    Broader source: Energy.gov [DOE]

    The Commercial and Industrial Equipment Rebate and Custom Efficiency Programs offer incentives to directly metered electric customers in good standing who contribute to the system benefits charge ...

  3. Energy @ Baltimore Comic-Con: Meet Our Panelists | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Disadvantaged Business Utilization. He was a Presidential Management Intern and web project manager for the Office of Energy Efficiency and Renewable Energy. Bittner was also a...

  4. Case Study - Con Edison Smart Grid Investment Grant

    Energy Savers [EERE]

    Case Studies by System Case Studies by System Case studies document the energy savings achieved by large manufacturing companies using AMO's software tools, other technical publications, and best practices. Case studies are available below for the following systems: Steam, Process Heating, Compressed Air, Motor, Pump, Fan, and Plant Wide. Case studies are also available for Combined Heat & Power. Plant-Wide Case Studies Alcoa: C-Suite Participation in Energy Efficiency Increases

  5. ConEd (Gas) - Residential Energy Efficiency Incentives Program...

    Broader source: Energy.gov (indexed) [DOE]

    < Back Eligibility Residential InstallersContractors Savings Category Water Heaters Furnaces Boilers Programmable Thermostats DuctAir sealing Other EE Maximum Rebate Duct...

  6. Pros and cons of power combined cycle in Venezuela

    SciTech Connect (OSTI)

    Alvarez, C.; Hernandez, S.

    1997-09-01

    In Venezuela combined cycle power has not been economically attractive to electric utility companies, mainly due to the very low price of natural gas. Savings in cost of natural gas due to a higher efficiency, characteristic of this type of cycle, does not compensate additional investments required to close the simple cycle (heat recovery steam generator (HRSG) and steam turbine island). Low gas prices have contributed to create a situation characterized by investors` reluctance to commit capital in gas pipe lines and associated equipment. The Government is taking measures to improve economics. Recently (January 1, 1997), the Ministry of Energy and Mines raised the price of natural gas, and established a formula to tie its price to the exchange rate variation (dollar/bolivar) in an intent to stimulate investments in this sector. This is considered a good beginning after a price freeze for about three years. Another measure that has been announced is the implementation of a corporate policy of outsourcing to build new gas facilities such as pipe lines and measuring and regulation stations. Under these new circumstances, it seems that combined cycle will play an important role in the power sector. In fact, some power generation projects are considering building new plants using this technology. An economical comparative study is presented between simple and combined cycles power plant. Screening curves are showed with a gas price forecast based on the government decree recently issued, as a function of plant capacity factor.

  7. Chemical Consortium Holdings Inc ChemCon | Open Energy Information

    Open Energy Info (EERE)

    Hydro, Hydrogen Product: Develops and operates projects in the bioethanol, biodiesel, methanol, hydrogen and liquid natural gas industries. References: Chemical Consortium Holdings...

  8. Job Safety Health Poster Spanish 09042014.docx

    Office of Environmental Management (EM)

    Es la Ley Empleados y sus Representantes tienen derecho a: Participar en el programa de seguridad y salud del lugar de trabajo, incluyendo las inspecciones que se realicen;...

  9. RoboCon: Operator interface for robotic applications. Final report: RoboCon electrical interfacing -- system architecture, and Interfacing NDDS and LabView

    SciTech Connect (OSTI)

    Schempf, H.

    1998-04-30

    The first appendix contains detailed specifications of the electrical interfacing employed in Robocon. This includes all electrical signals and power requirement descriptions up to and including the interface entry points for external robots and systems. The reader is first presented with an overview of the overall Robocon electrical system, followed by sub-sections describing each module in detail. The appendices contain listings of power requirements and the electrical connectors and cables used, followed by an overall electrical system diagram. Custom electronics employed are also described. The Network Data Delivery Service (NDDS) is a real-time dissemination communications architecture which allows nodes on a network to publish data and subscribe to data published by other nodes while remaining anonymous. The second appendix explains how to facilitate a seamless interface between NDDS and LabView and provides sample source code used to implement an NDDS consumer which writes a string to a socket.

  10. This notice provides Request for Proposal (RFP) No. DE-SOL-0005388. The RFP con

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    notice provides Request for Proposal (RFP) No. DE-SOL-0005388. The RFP contains modifications as compared to the draft RFP; therefore, please review the RFP in its entirety. Release of the RFP in no way commits the Government to procure this requirement. Potential Offerors assume all liabilities and risks associated with any actions taken or expenses incurred based on information presented in the RFP. The U.S. Department of Energy (DOE), National Energy Technology Laboratory (NETL), is issuing

  11. Gallium Safety in the Laboratory INEEL/CON-03-00078

    Office of Scientific and Technical Information (OSTI)

    or represents that its use by such third party would not infringe privately owned rights. ... gallium surfaces with oils from human skin, and gloves protect against puncture wounds. ...

  12. EPA`s proposed renewable oxygenate requirement (ROR): Pros and cons

    SciTech Connect (OSTI)

    Czeskleba, H.M.

    1995-12-31

    In December 1993, the US Environmental Protection Agency (EPA) released its final rule that sets for the details for requirements to sell reformulated gasoline (RFG) in certain ozone non-attainment areas. At the same time, EPA also issued a proposed rule to require that 30% of the oxygen required in RFG be based on a renewable oxygenate. Renewables include ethanol and its ether derivatives such as ethyl tertiary butyl ether (ETBE). The RFG rule is a final rule, while the Renewable Oxygenate Requirement (ROR) rule is a proposed rule yet to be finalized and subject to revision. Included in this paper are brief reviews of Ashland petroleum Company`s ethanol usage, oxygenated fuel and reformulated gasoline blending economics, and some comments on the EPA proposed renewable oxygenate requirement.

  13. Gallium Safety in the Laboratory INEEL/CON-03-00078

    Office of Scientific and Technical Information (OSTI)

    This is a preprint of a paper intended for publication in a journal or proceedings. Since changes may be made before publication, this preprint should not be cited or reproduced without permission of the author. This document was prepared as a account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, or any of their employees, makes any warranty, expressed or implied, or assumes any legal liability or responsibility for

  14. CANTON LAKESHORE CANTON E BEST CON NEAUT GIDD INGS EAST N ELLSWORT

    U.S. Energy Information Administration (EIA) Indexed Site

    ... WAT SON -DU HRIN G EVERGREEN KELLY HILL RED BRUSH WEILER SVILLE MEAD VI LLE LAM AR TINE ROSS LEET SDALE RPD-R ICHLAND -4 CROWS RUN WAT TSVILLE S GLADE R UN WIN ESBU RG HAT CH CORN ...

  15. CANTON LAKESHORE CANTON E BEST CON NEAUT GIDD INGS EAST N ELLSWORT

    U.S. Energy Information Administration (EIA) Indexed Site

    Liquids Reserve Class No 2001 liquids reserves 0.1 - 10 Mbbl 10.1 - 100 Mbbl 100.1 - 1,000 Mbbl 1,000.1 - 10,000 Mbbl Appalachian Basin Boundary C a n a d a U S A OH PA MI NY Lake ...

  16. CANTON LAKESHORE CANTON E BEST CON NEAUT GIDD INGS EAST N ELLSWORT

    U.S. Energy Information Administration (EIA) Indexed Site

    Gas Reserve Class No 2001 gas reserves 0.1 - 10 MMCF 10.1 - 100 MMCF 100.1 - 1,000 MMCF 1,000.1 - 10,000 MMCF 10,000.1 - 100,000 MMCF > 100,000 MMCF Appalachian Basin Boundary C a ...

  17. DOE Takes Action to Stop the Sales of Air-Con Air Conditioner...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Read the full Notice of Noncompliance Determination and Proposed Civil Penalty (pdf - 234kb). Follow the Department of Energy on Facebook, Twitter, Youtube and Flickr. Follow ...

  18. Ahorra energía y dinero con el viento: 5 pasos antes de invertir...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... local de energa para obtener informacin sobre los incentivos de tu estado o municipio. Buscas ms informacin sobre la eficiencia energtica y la energa renovable? ...

  19. CANTON LAKESHORE CANTON E BEST CON NEAUT GIDD INGS EAST N ELLSWORT

    U.S. Energy Information Administration (EIA) Indexed Site

    MCKEESPORT COR AOPOLIS-MOON REDHAW ST. CLAIR SC ROGGSFIELD FRANKLIN -OAK FOREST RIMERSBURG RENNERD AL E GREENVILL E PAT MOS CRABTR EE BLAC K ASH ROYALT ON N BAKERSTOWN QUEEN ROU GH RUN LUCAS BLAC K H ILL CRESTON WAT TSVILLE WADSWORTH -NORT H OAKLAN D HOM EWORT H UNIT Y ESSELBRUN ALAMED A PAR K-CROOKED RU CHERRY GROVE FRENC HTOWN ST EWART RUN MILL C REEK GLENF IELD-MOU NT NEBO HICKORY E HARRISVILLE E LEST ER GRIGGS CORNERS EN GLAN D WEST VIL LE LAKE BAILEY LAKE OAKFORD BR UNSWICK N HOR ACE

  20. CANTON LAKESHORE CANTON E BEST CON NEAUT GIDD INGS EAST N ELLSWORT

    U.S. Energy Information Administration (EIA) Indexed Site

    Gas Reserve Class No 2001 gas reserves 0.1 - 10 MMCF 10.1 - 100 MMCF 100.1 - 1,000 MMCF 1,000.1 - 10,000 MMCF 10,000.1 - 100,000 MMCF > 100,000 MMCF Appalachian Basin Boundary C a n a d a U S A OH PA MI NY Lake Erie Lake St. Claire Total Total Total Number Liquid Gas BOE of Reserves Reserves Reserves Basin Fields (Mbbl) (MMcf) (Mbbl) Appalachian 3354 79,141 9,550,156 1,670,834 2001 Proved Reserves for Entire Applachian Basin WV Appalachian Basin, OH-PA (Panel 2 of 7) Oil and Gas Fields By

  1. CANTON LAKESHORE CANTON E BEST CON NEAUT GIDD INGS EAST N ELLSWORT

    U.S. Energy Information Administration (EIA) Indexed Site

    Liquids Reserve Class No 2001 liquids reserves 0.1 - 10 Mbbl 10.1 - 100 Mbbl 100.1 - 1,000 Mbbl 1,000.1 - 10,000 Mbbl Appalachian Basin Boundary C a n a d a U S A OH PA MI NY Lake Erie Lake St. Claire Total Total Total Number Liquid Gas BOE of Reserves Reserves Reserves Basin Fields (Mbbl) (MMcf) (Mbbl) Appalachian 3354 79,141 9,550,156 1,670,834 2001 Proved Reserves for Entire Applachian Basin WV Appalachian Basin, OH-PA (Panel 2 of 7) Oil and Gas Fields By 2001 Liquids

  2. E-Verify If you have the Right to Work Poster (English)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SI USTED TIENE DERECHO A TRABAJAR, no deje que nadie se lo quite. Si tiene derecho a trabajar legalmente en los Estados Unidos, existen leyes para protegerlo contra la discrim-...

  3. The effect of annealing temperature on the electrical characterization of Co/n type GaP Schottky diode

    SciTech Connect (OSTI)

    Orak, ?.; Ejderha, K.; Snmez, E.; Alanyal?o?lu, M.; Turut, A.

    2015-01-15

    The Co/n-GaP nano-Schottky diodes have been fabricated to investigate effect of annealing temperature on the characteristics of the device. DC Magnetron sputtering technique has been used for Co metallic contact. The samples have been annealed for three minutes at 400 C and 600 C. XRD analyzes of the devices subjected to thermal annealing process have been investigated. Surface images have been taken with atomic force microscopy (AFM) in order to examine the morphology of the surface of the metal layer before and after the annealing the sample. The currentvoltage (IV) measurements taken at room temperature have shown that the ideality factor and series resistance decrease with the increasing annealing temperature. The ideality factor was found to be 1.02 for sample annealed at 400 C. Before and after annealing, depending on the temperature measurement, the capacitancefrequency (Cf), and conductancefrequency (Gf) have been measured, and graphs have been plotted.

  4. Fusion, mechanical joining methods pros, cons--Part 2. [Natural gas pipelines use of mechanical and fusion joints

    SciTech Connect (OSTI)

    Gunther, K.M. )

    1993-10-01

    Two basic techniques accepted by gas distribution utility companies for joining polyethylene pipe underground are fusion methods and mechanical joining. Washington Gas Light Co., uses the fusion methods for the most part and uses mechanical joints for repair and final tie-ins where fusion methods are impractical or impossible to use. Fusion methods used by gas industry users of plastic pipe are: butt fusion; socket fusion; saddle fusion; electrofusion. Mechanical pipe joining techniques or procedures include: factory made mechanical joints such as meter risers and transition fittings; hydraulic compression couplings; bolted and screwed compression couplings; stab type compression couplings; interior seal couplings. Every joining method has strengths, weaknesses, pitfalls and ways they can fail in service. The key is making the best selection based on such factors as location, temperature, conditions, available equipment, personnel training level and cost. No one method will do it all or every company would be using that particular method. Part 2 focuses on strengths, weaknesses, pitfalls and failure possibilities of the five mechanical techniques.

  5. Lawrence Co. Scioto Co. Greenup Co. Jack

    U.S. Energy Information Administration (EIA) Indexed Site

    NE BREEDEN MAR E CREEK SCHOOL FAR LEY C HUR CH W LON G R UN LICKBURG RPD-GALLIA-1 MIMA LEF ... HINDMAN E STAF FORD SPEIGHT E ST EPHENS JUM PIN G BR AN CH GRASSY CREEK RICH POND WH ITMER ...

  6. Monodisperse core/shell Ni/FePt nanoparticles and their con-version to Ni/Pt to catalyze oxygen reduction

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhang, Sen; Hao, Yizhou; Su, Dong; Doan-Nguyen, Vicky V. T.; Wu, Yaoting; Li, Jing; Sun, Shouheng; Murray, Christopher B.

    2014-10-28

    We report a size-controllable synthesis of monodisperse core/shell Ni/FePt nanoparticles (NPs) via a seed-mediated growth and their subsequent conversion to Ni/Pt NPs. Preventing surface oxidation of the Ni seeds is essential for the growth of uniform FePt shells. These Ni/FePt NPs have a thin (≈ 1 nm) FePt shell, and can be converted to Ni/Pt by acetic acid wash to yield active catalysts for oxygen reduction reaction (ORR). Tuning the core size allow for optimization of their electrocatalytic activity. The specific activity and mass activity of 4.2 nm/0.8 nm core/shell Ni/FePt reach 1.95 mA/cm² and 490 mA/mgPt at 0.9 Vmore » (vs. reversible hydrogen electrode, RHE), which are much higher than those of benchmark commercial Pt catalyst (0.34 mA/cm² and 92 mA/mgPt at 0.9 V). Our studies provide a robust approach to monodisperse core/shell NPs with non-precious metal core, making it possible to develop advanced NP catalysts with ultralow Pt content for ORR and many other heterogeneous reactions.« less

  7. Ahorra energía y dinero con el viento: 5 pasos antes de invertir en un nuevo sistema eólico

    Broader source: Energy.gov [DOE]

    ¿Te interesa en un sistema eólico de energía en casa? También puedes leer sobre los siguientes 5 pasos importantes en español.

  8. Monodisperse core/shell Ni/FePt nanoparticles and their con-version to Ni/Pt to catalyze oxygen reduction

    SciTech Connect (OSTI)

    Zhang, Sen; Su, Dong; Doan-Nguyen, Vicky V. T.; Wu, Yaoting; Li, Jing; Sun, Shouheng; Murray, Christopher B.; Hao, Yizhou

    2014-11-12

    We report a size-controllable synthesis of monodisperse core/shell Ni/FePt nanoparticles (NPs) via a seed-mediated growth and their subsequent conversion to Ni/Pt NPs. Preventing surface oxidation of the Ni seeds is essential for the growth of uniform FePt shells. These Ni/FePt NPs have a thin (? 1 nm) FePt shell, and can be converted to Ni/Pt by acetic acid wash to yield active catalysts for oxygen reduction reaction (ORR). Tuning the core size allow for optimization of their electrocatalytic activity. The specific activity and mass activity of 4.2 nm/0.8 nm core/shell Ni/FePt reach 1.95 mA/cm and 490 mA/mgPt at 0.9 V (vs. reversible hydrogen electrode, RHE), which are much higher than those of benchmark commercial Pt catalyst (0.34 mA/cm and 92 mA/mgPt at 0.9 V). Our studies provide a robust approach to monodisperse core/shell NPs with non-precious metal core, making it possible to develop advanced NP catalysts with ultralow Pt content for ORR and many other heterogeneous reactions.

  9. Monodisperse core/shell Ni/FePt nanoparticles and their con-version to Ni/Pt to catalyze oxygen reduction

    SciTech Connect (OSTI)

    Zhang, Sen; Hao, Yizhou; Su, Dong; Doan-Nguyen, Vicky V. T.; Wu, Yaoting; Li, Jing; Sun, Shouheng; Murray, Christopher B.

    2014-10-28

    We report a size-controllable synthesis of monodisperse core/shell Ni/FePt nanoparticles (NPs) via a seed-mediated growth and their subsequent conversion to Ni/Pt NPs. Preventing surface oxidation of the Ni seeds is essential for the growth of uniform FePt shells. These Ni/FePt NPs have a thin (≈ 1 nm) FePt shell, and can be converted to Ni/Pt by acetic acid wash to yield active catalysts for oxygen reduction reaction (ORR). Tuning the core size allow for optimization of their electrocatalytic activity. The specific activity and mass activity of 4.2 nm/0.8 nm core/shell Ni/FePt reach 1.95 mA/cm² and 490 mA/mgPt at 0.9 V (vs. reversible hydrogen electrode, RHE), which are much higher than those of benchmark commercial Pt catalyst (0.34 mA/cm² and 92 mA/mgPt at 0.9 V). Our studies provide a robust approach to monodisperse core/shell NPs with non-precious metal core, making it possible to develop advanced NP catalysts with ultralow Pt content for ORR and many other heterogeneous reactions.

  10. Regional Dialogue Policy Implementation Contracts (pbl/contracts...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Inland Power & Light Company Con-65 Umpqua Indian Utility Cooperative Con-66 United States Senate Committee on Energy and Natural Resources Con-67 Slice Customers...

  11. DOI: 10

    Office of Scientific and Technical Information (OSTI)

    WlLEY-VCH DOI: 10.1002/ Article type: Full Paper Controlled Nanopatterning of a Polymerized Ionic Liquid in a Strong Electric Field Vera Bocharova*, Alexander L. Agapov, Alexander Tselev, Rajeev Kumar, Stefan Berdzinski, Veronika Strehmel, Alexander Kisliuk, Ivan I. Kravchenko, Bobby G. Sumpter, Alexei P. Sokolov, Sergei V. Kalinin, and Evgheni Strelcov Dr. V. Bocharova, Dr. A. Kisliuk, Prof. A.P. Sokolov Chemical Sciences Division, Oak Ridge National Laboratory, Oak Ridge, TN - 37831, USA

  12. transims-application-and-development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    TRANSIMS: Applications and Development Workshop : April 8-9, 2010 Organizers Dr. Hubert Ley Dr. Vadim Sokolov This email address is being protected from spambots. You need JavaScript enabled to view it. Brian Gardner Office of Planning Federal Highway Administration This email address is being protected from spambots. You need JavaScript enabled to view it. Agenda Announcement pdficon small Accompanying Materials Adobe Connect Recording Links Accompanying Materials Introduction to the TRANSIMS

  13. transims-training-course-april-2008

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    April 2008 TRACC Dr. Hubert Ley This email address is being protected from spambots. You need JavaScript enabled to view it. Announcement pdficon small The Transportation Research and Analysis Computing Center at Argonne National Laboratory has held several training courses on TRANSIMS. The courses originated from the need to train several groups of students and collaborators that work on a major evacuation study for Chicago under a project for the Illinois Department of Transportation and other

  14. transims-training-course-jan-19

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    January 19 to 21, 2011 Argonne National Laboratory Dr. Hubert Ley This email address is being protected from spambots. You need JavaScript enabled to view it. Announcement pdficon small Transportation Research and Analysis Computing Center at Argonne National Laboratory has held nearly a dozen of courses on TRANSIMS. The courses originated from the need to train several groups of students and collaborators that work on a major evacuation study for Chicago under a project for the Illinois

  15. transims-training-course-jan-27

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    TRANSIMS Training Course January 27-29, 2009 Moreno Valley, CA Dr. Hubert Ley This email address is being protected from spambots. You need JavaScript enabled to view it. Announcement pdficon small The Transportation Research and Analysis Computing Center at Argonne National Laboratory has held several training courses on TRANSIMS. The courses originated from the need to train several groups of students and collaborators that work on a major evacuation study for Chicago under a project for the

  16. transims-training-course-june-23

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    June 23 to 25, 2009 University of Houston Dr. Hubert Ley This email address is being protected from spambots. You need JavaScript enabled to view it. Announcement pdficon small The Transportation Research and Analysis Computing Center at Argonne National Laboratory has held several training courses on TRANSIMS. The courses originated from the need to train several groups of students and collaborators that work on a major evacuation study for Chicago under a project for the Illinois Department of

  17. transportation-system-modeling-webinar

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Webinar Announcement Webinar for the Intelligent Transportation Society of the Midwest (ITS Midwest) May 16, 2011 1:00 PM(CST) Hubert Ley Director, TRACC Argonne National Laboratory Argonne, Illinois High Performance Computing in Transportation Research - High Fidelity Transportation Models and More The Role of High-Performance Computing Because ITS relies on a very diverse collection of technologies, including communication and control technologies, advanced computing, information management

  18. Staff Directory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Staff Directory Principal Investigator hubert-125 Hubert Ley, TRACC Director Phone: 630-252-8224; Fax: 630-252-5394; E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it. Ph.D. and Masters, Nuclear Engineering, Rheinisch-Westfaelische Technische Hochschule, Aachen, Germany More than 20 years' experience in simulation, modeling, high-performance computing, and visualization Served on Argonne's International Nuclear Safety team, participating in

  19. Enhanced thermal and gas flow performance in a three-way catalytic

    Broader source: Energy.gov (indexed) [DOE]

    converter through use of insulation within the ceramic monolith | Department of Energy Emissions performance comparison of conventional catalytic converter with multi-channel catalytic converter (ceramic fiber insulation layers introduced into ceramic monolith of three-way catalytic converter) PDF icon deer11_ley.pdf More Documents & Publications NH3 generation over commercial Three-Way Catalysts and Lean-NOx Traps Emissions Control for Lean Gasoline Engines Monolithic Metal Oxide based

  20. agenda-april-8

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Agenda TRANSIMS Workshop, Thursday, April 8 8:00 Registration 9:00 David Weber Introduction and Welcoming Remarks 9:15 Fred Ducca Key-Note Address: Historical Remarks on TRANSIMS 9:55 David Roden Development Plans and Design Concepts for TRANSIMS Version 5 10:30 Tea/Coffee 10:45 Hubert Ley Advanced TRANSIMS User Interfaces - TRANSIMS Studio and the RTE Run Time Environment 11:15 Michael Hope Parallelization of the TRANSIMS Microsimulator - Design, Development, and Performance 11:45 Reinaldo

  1. Gateway:Amrica Latina/Diseo de polticas y programas | Open...

    Open Energy Info (EERE)

    para garantizar el desarrollo sostenible, teniendo en cuenta la equidad social, crecimiento econmico, la gobernabilidad y compatibilidad con el ambiente, de acuerdo con los...

  2. Energa hidroelctrica | Open Energy Information

    Open Energy Info (EERE)

    Energa hidroelctrica Jump to: navigation, search Potencia generada con hidroelctrica en sur Amrica fuente IEA Potencia generada con energa hidroelctrica en centro...

  3. Print

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conversa con tus padres sobre los termostatos digitales y programables. Conversa con tus padres sobre el mejoramiento del hogar para ahorrar energa (ventanas, puertas y techos). ...

  4. Biomasa | Open Energy Information

    Open Energy Info (EERE)

    Biomasa Jump to: navigation, search Mapa Interactivo de Biocombustibles Potencia generada con Biomasa en sur America fuente IEA Potencia generada con Biomasa en centro America...

  5. Host Genetic Control of the Microbiome in Humans and Maise or Relating Host Genetic Variation to the Microbiome (2011 JGI User Meeting)

    SciTech Connect (OSTI)

    Ley, Ruth [Cornell University] [Cornell University

    2011-03-23

    The U.S. Department of Energy Joint Genome Institute (JGI) invited scientists interested in the application of genomics to bioenergy and environmental issues, as well as all current and prospective users and collaborators, to attend the annual DOE JGI Genomics of Energy & Environment Meeting held March 22-24, 2011 in Walnut Creek, Calif. The emphasis of this meeting was on the genomics of renewable energy strategies, carbon cycling, environmental gene discovery, and engineering of fuel-producing organisms. The meeting features presentations by leading scientists advancing these topics. Ruth Ley of Cornell University gives a presentation on "Relating Host Genetic Variation to the Microbiome" at the 6th annual Genomics of Energy & Environment Meeting on March 23, 2011.

  6. Host Genetic Control of the Microbiome in Humans and Maise or Relating Host Genetic Variation to the Microbiome (2011 JGI User Meeting)

    ScienceCinema (OSTI)

    Ley, Ruth [Cornell University

    2011-06-03

    The U.S. Department of Energy Joint Genome Institute (JGI) invited scientists interested in the application of genomics to bioenergy and environmental issues, as well as all current and prospective users and collaborators, to attend the annual DOE JGI Genomics of Energy & Environment Meeting held March 22-24, 2011 in Walnut Creek, Calif. The emphasis of this meeting was on the genomics of renewable energy strategies, carbon cycling, environmental gene discovery, and engineering of fuel-producing organisms. The meeting features presentations by leading scientists advancing these topics. Ruth Ley of Cornell University gives a presentation on "Relating Host Genetic Variation to the Microbiome" at the 6th annual Genomics of Energy & Environment Meeting on March 23, 2011.

  7. u.s. DEPARTMENT OF ENERGY EERE PROJECT MANAGEMENT CENTER NEPA...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of fish , wildlife, and cultural resources Field and laboratory research, Inventory, and infonnation collection activities that are drrectly related to the conS6l'Vation of fish ...

  8. BID | Open Energy Information

    Open Energy Info (EERE)

    sostenible y respetuosa con el clima. Fundado en 1959, somos la mayor fuente de financiamiento para el desarrollo de Amrica Latina y el Caribe, con un slido compromiso para...

  9. CIP cover 1 and 4.qxd

    Office of Environmental Management (EM)

    ... Information Sharing Requirements for the Oil and Natural Gas Industries . . . . . . . . . . . . . . . . . ... The expressed concerns relate to safety, environmental, con- gestion, land ...

  10. Management Overview

    Energy Savers [EERE]

    (OpsCon) for Advanced Reactors to inform system, ... nuclear power plants. Conduct research to investigate the effect of automation on performance, efficiency, and safety...

  11. no_10.pgm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... other: 1) legacy cleanup, 2) nonproliferation and arms ... Con- tainer materials such as pipes and holding vessels ... Iron and Steel Institute 304 stainless steel (304 SS), ...

  12. Nexus EnergyHomes, Frederick, Maryland (Fact Sheet), Building...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This strategy avoided the common pitfall of creating potential air leakage where architectural features are con- nected ... conclusive air leakage testing before interior fnishing, ...

  13. Consolidated Edison Solutions, Inc. ESCO Qualification Sheet...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sheet Consolidated Edison Solutions, Inc. ESCO Qualification Sheet Document outlines the energy service company (ESCO) qualifications for ConEdison Solutions. PDF icon ces

  14. Purpose

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... 6. Cuando termines el experimento, limpia el imn con una toalla de papel y tira ... papel entre ellas para observar la conversin de energa mecnica a energa trmica. ...

  15. New York's 18th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    of Westchester County (NY) ConEdison Solutions Jasper Energy LLC Malcolm Pirnie Mercury Energy formerly Aquus Energy Mercury Solar Systems Microgy Cogeneration Systems Inc...

  16. Gateway:Amrica Latina/Aprender ms sobre las ERNC/Estudios...

    Open Energy Info (EERE)

    Ingeniera y Seleccin de EquiposGeotermia Jump to: navigation, search Analisis de Proyectos de Bomba de Calor con Fuente Geotermica Fuente: Leonardo Energy Idioma: Espaol...

  17. Ayuda:Administrar archivos | Open Energy Information

    Open Energy Info (EERE)

    con el fin de brindar mayor informacin acerca del archivo. Por ejemplo, varios proyectos pblicos wiki estn expuestos a problemas de derechos de autor, por lo tanto es...

  18. Response to several FOIA requests- Renewable Energy pages 4001- 4250

    Broader source: Energy.gov [DOE]

    Response to several FOIA requests - Renewable Energy. nepdg_4001_4250.pdf R.eport Statement/Recommendation Background Pros/Cons discussion

  19. DOE/EIA-0625(95) Distribution Category UC-950 A Look

    U.S. Energy Information Administration (EIA) Indexed Site

    that Con- gressional mandate, the EIA conducts two types of surveys: * Supply surveys gather information annually or more frequently from energy suppliers and marketers on the...

  20. Slide 1

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Chemical Industry Nuclear Facility Operators, Chemical Plant Operators, CAT 2 Facility Nuclear Criticality Safety, Con-Ops, Waste Mgt Ops (Seconded SMEs from chemical industry) ...

  1. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Building, CustomOthers pending approval, Other EE, Food Service Equipment, Personal Computing Equipment, Data Center Equipment, Commercial Refrigeration Equipment ConEd...

  2. Numerical Verification of Bounce Harmonic Resonances in Neoclassical...

    Office of Scientific and Technical Information (OSTI)

    ... different regimes is required to make a prediction in tokamaks, which are almost always ... E con- dition in a Maxwellian distribution, the BH resonances change the NTV prediction. ...

  3. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    city to adopt the 2012 International Green Construction Code (with amendments, hereafter Dallas Green Construction Code) as mandatory for new commercial cons... Eligibility:...

  4. biological_conversion_of_sugars_to_hydrocarbons

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Enzymatic Hydrolysis (Enzymes, Produced On-Site, Added to Initiate Reaction) Solids Separation (Insoluble Solids Removed; Dilute Sugar Stream Con- centrated Via Evaporation) ...

  5. Addendum

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to uncertainty in in MINOS; here we update that estimate with an improved treatment of nuclear effects, and consider two con- sequences of these effects separately....

  6. Category:Smart Grid Projects | Open Energy Information

    Open Energy Info (EERE)

    con":"","text":"

  7. Title

    National Nuclear Security Administration (NNSA)

    During tlic course of ecological studies con- ducted tit the Atomic Energy Commission test ... The Sal-'.- Thrasher (Orcoacuptea montannx). Green- tailed Towhce (Chlonirti chloruru), ...

  8. AWS Truewind | Open Energy Information

    Open Energy Info (EERE)

    con":"","group":"","inlineLabel":"","visitedicon":"" Hide Map References: AWS Truewind Web Site1 WindNavigator2 Information About Partnership with NREL Partnership with NREL...

  9. Microsoft Word - UEC meeting with SHUG reps 09-17-09.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Attendees- Facility Staff Lynn Kzsos (SNS) Al Ekkebus (SNS) Tony Haynes (CNMS) Laura Edwards (CNMS) Discussion of combining proposal calls, pros & cons Pros: expectations for...

  10. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    VFDs, Processing and Manufacturing Equipment, CustomOthers pending approval, Other EE, Food Service Equipment, Vending Machine Controls, Tankless Water Heater ConEd (Electric)-...

  11. Layout And Results From The Initial Opeeration Of The High-resolution...

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Search Results Technical Report: Layout And Results From The Initial ... The nal hardware design and con guration are detailed along with the calibration ...

  12. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... Have feedback or suggestions for a way to improve these results? Layout And Results From ... The nal hardware design and con guration are detailed along with the calibration ...

  13. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Have feedback or suggestions for a way to improve these results? Layout And Results From ... The nal hardware design and con guration are detailed along with the calibration ...

  14. Lessons Learned by Environmental Management Complex-wide Activity-level Work Planning and Control

    Office of Environmental Management (EM)

    Management Work Planning and Control Oversight Roger Claycomb Work Control Program Manager DOE Idaho Operations Office EM Headquarters WP&C Oversight * EM-42 Office of Operational Safety performs EM-HQ Con Ops and WP&C Oversight * Assessment schedule for planned evaluation of contractor Con Ops and WP&C programs * For Cause evaluations in response to events * Con Ops and WP&C CRADs include a criterion to evaluate Con Ops or WP&C SMP adequacy and if the Program's

  15. Consolidated Edison Sol Inc (Maine) | Open Energy Information

    Open Energy Info (EERE)

    Consolidated Edison Sol Inc Place: Maine Phone Number: (914) 286-7000 Website: www.conedsolutions.com Twitter: @ConEdSolutions Facebook: https:www.facebook.comconedsolutions...

  16. Radiological Contamination Control Training for Laboratory Research

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Available to DOE and DOE contractors from ES&H Technical ......... 13 Course Description......outlined in the DOE Radiological Control (RadCon) Standard. ...

  17. Ayuda:Buscadores externos | Open Energy Information

    Open Energy Info (EERE)

    En el caso del Editor, las bsquedas externas permiten realizar bsquedas en la red con mayor rapidez y menor esfuerzo. Entre las otras aplicaciones de la plantilla...

  18. Centro de Energas Renovables (CER) en espaol | Open Energy...

    Open Energy Info (EERE)

    de barreras en la materializacin de proyectos. Promover y desarrollar una red de convenios y vnculos con centros e instituciones, a nivel nacional e internacional,...

  19. BPA-2011-02052-FOIA Response

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the rate pressure is still negative Cons: Not as transparent, may seem disingenuous Pros: Most responsive and considerate which is consistent with transparent NOS process...

  20. Microsoft Word - PR-24-13-BPA-turns-science-educators-visions...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    program will reach 540 students from middle school through high school about the pros and cons of various types of energy generation. It will also demonstrate science and...

  1. Green Light for Renewables in Developing Countries | Open Energy...

    Open Energy Info (EERE)

    underpins how development and access to electricity are intertwined. It highlights the pros and cons of various technologies. Cost breakdowns show that renewable energy is under...

  2. Los lideres de energia en EEUU toman medidas para desarrollar...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    conjuncin con el gobierno de Per y un Centro Regional de Viento apoyado por Mxico. ... hidrocarburos ms limpios, la infraestructura crtica, y alivio de pobreza de energa. ...

  3. Operating Experience Summary, 2013-03

    Broader source: Energy.gov (indexed) [DOE]

    the floor below. He fell onto his right side, suffering multiple fractures and damaged lungs. PE-1 immediately called for assistance, and coworkers con- tacted BNL fire rescue....

  4. Civil Penalties for Energy Conservation Standards Program Violations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Air-Con International: Noncompliance Determination and Proposed Penalty (2010-SE-0301) AeroSys: Proposed Penalty (2011-SCE-1624) Goodman ...

  5. Ayuda:Bsqueda | Open Energy Information

    Open Energy Info (EERE)

    considerar solamente los espacios de nombre definidos en sus preferencias. Por otro lado, los usuarios registrados podrn modificar sus preferencias con el fin de especificar...

  6. Semiconductor Science and Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... room lights that also broadcast information * conSumeR electRonicS Brilliant colors ... lasers to detect chemical and biological warfare agents sandia's focus: Bridging Basic ...

  7. DOE/SC-ARM-0903

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0903 3 Table of ConTenTs Program Overview............................................................................................................................................................. 4 . The.Importance.of.Clouds.and.Radiation.to.Climate.Change...................................................................................... 4 .

  8. ch_1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... The Nuclear Waste Policy Act of 1982, as amended, determined that a geological repository ... obtain- ing representative con- stituent samples from the large volumes of mixed ...

  9. Department of Energy Opens Appliance Standards Investigation...

    Energy Savers [EERE]

    Opens Appliance Standards Investigation for Certain Air Con International Air Conditioners and Heat Pumps Department of Energy Opens Appliance Standards Investigation for Certain ...

  10. Acworth, New Hampshire: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    con":"","group":"","inlineLabel":"","visitedicon":"" Hide Map Acworth is a town in Sullivan County, New Hampshire.1 References US Census Bureau Incorporated place and...

  11. Informal Report

    Office of Scientific and Technical Information (OSTI)

    ... ratio of area of unknown sample to height, cmcm, pv output of digital voltmeter, MV, C calorimeter constant, pcalpv, T, temperature of hot platen con- verted from DSC ...

  12. Optimum position for wells producing at constant wellbore pressure

    SciTech Connect (OSTI)

    Camacho-Velazquez, R.; Rodriguez de la Garza, F.; Galindo-Nava, A.; Prats, M.

    1994-12-31

    This paper deals with the determination of the optimum position of several wells, producing at constant different wellbore pressures from a two-dimensional closed-boundary reservoirs, to maximize the cumulative production or the total flow rate. To achieve this objective they authors use an improved version of the analytical solution recently proposed by Rodriguez and Cinco-Ley and an optimization algorithm based on a quasi-Newton procedure with line search. At each iteration the algorithm approximates the negative of the objective function by a cuadratic relation derived from a Taylor series. The improvement of rodriguez and Cinco`s solution is attained in four ways. First, an approximation is obtained, which works better at earlier times (before the boundary dominated period starts) than the previous solution. Second, the infinite sums that are present in the solution are expressed in a condensed form, which is relevant for reducing the computer time when the optimization algorithm is used. Third, the solution is modified to take into account the possibility of having wells starting to produce at different times. This point allows them to deal with the problem of getting the optimum position for an infill drilling program. Last, the solution is extended to include the possibility of changing the value of wellbore pressure or being able to stimulate any of the wells at any time. When the wells are producing at different wellbore pressures it is found that the optimum position is a function of time, otherwise the optimum position is fixed.

  13. East Central Energy (Wisconsin) | Open Energy Information

    Open Energy Info (EERE)

    (MWH) OTH CONS TOT REV (THOUSAND ) TOT SALES (MWH) TOT CONS 2009-03 497.322 5,074.657 4,666 49.223 506.276 262 546.545 5,580.933 4,928 2009-02 617.038 6,336.617 4,668 59.259...

  14. Concanavalin A: A potential anti-neoplastic agent targeting apoptosis, autophagy and anti-angiogenesis for cancer therapeutics

    SciTech Connect (OSTI)

    Li, Wen-wen; Yu, Jia-ying; Xu, Huai-long; Bao, Jin-ku

    2011-10-22

    Highlights: {yields} ConA induces cancer cell death targeting apoptosis and autophagy. {yields} ConA inhibits cancer cell angiogenesis. {yields} ConA is utilized in pre-clinical and clinical trials. -- Abstract: Concanavalin A (ConA), a Ca{sup 2+}/Mn{sup 2+}-dependent and mannose/glucose-binding legume lectin, has drawn a rising attention for its remarkable anti-proliferative and anti-tumor activities to a variety of cancer cells. ConA induces programmed cell death via mitochondria-mediated, P73-Foxo1a-Bim apoptosis and BNIP3-mediated mitochondrial autophagy. Through IKK-NF-{kappa}B-COX-2, SHP-2-MEK-1-ERK, and SHP-2-Ras-ERK anti-angiogenic pathways, ConA would inhibit cancer cell survival. In addition, ConA stimulates cell immunity and generates an immune memory, resisting to the same genotypic tumor. These biological findings shed light on new perspectives of ConA as a potential anti-neoplastic agent targeting apoptosis, autophagy and anti-angiogenesis in pre-clinical or clinical trials for cancer therapeutics.

  15. Radiological safety training for accelerator facilities: DOE handbook

    SciTech Connect (OSTI)

    1997-03-01

    This program management guide describes the proper implementation standard for core training as outline in the DOE Radiological Control (RadCon) Manual. Its purpose is to assist DOE employees and Managing and Operating (M&O) contractors having responsibility for implementing the core training recommended by the RadCon Manual.

  16. City Utilities of Springfield | Open Energy Information

    Open Energy Info (EERE)

    ) OTH SALES (MWH) OTH CONS TOT REV (THOUSAND ) TOT SALES (MWH) TOT CONS 2009-03 5,574.607 75,387.438 94,458 7,723.39 113,122.676 13,958 2,145.435 34,204.077 318 15,443.432...

  17. City of Independence, Missouri (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    OTH CONS TOT REV (THOUSAND ) TOT SALES (MWH) TOT CONS 2009-03 3,560.56 35,314.852 51,607 3,689.899 38,562.777 5,126 271.211 3,999.786 10 7,521.67 77,877.415 56,743 2009-02...

  18. City of Seattle, Washington (Utility Company) | Open Energy Informatio...

    Open Energy Info (EERE)

    ) OTH SALES (MWH) OTH CONS TOT REV (THOUSAND ) TOT SALES (MWH) TOT CONS 2009-03 23,601 373,913 353,104 24,986 456,778 39,325 4,440 92,495 220 3 47 3 53,030 923,233 392,652...

  19. PacifiCorp (Idaho) | Open Energy Information

    Open Energy Info (EERE)

    OTH CONS TOT REV (THOUSAND ) TOT SALES (MWH) TOT CONS 2009-03 4,863.802 67,315.248 56,342 2,259.042 33,641.948 8,317 6,035.093 136,727.669 5,524 13,157.937 237,684.865 70,183...

  20. City of Kansas City, Kansas (Utility Company) | Open Energy Informatio...

    Open Energy Info (EERE)

    SALES (MWH) OTH CONS TOT REV (THOUSAND ) TOT SALES (MWH) TOT CONS 2009-03 3,262 40,087 56,891 5,911 77,724 7,095 3,466 64,803 94 12,639 182,614 64,080 2009-02 5,311 48,126 57,266...

  1. Empire District Electric Co (Kansas) | Open Energy Information

    Open Energy Info (EERE)

    OTH SALES (MWH) OTH CONS TOT REV (THOUSAND ) TOT SALES (MWH) TOT CONS 2009-03 766.958 8,132.05 8,688 437.806 4,470.832 1,413 386.225 5,336.492 51 1,590.989 17,939.374 10,152...

  2. Consolidated Edison Co-NY Inc | Open Energy Information

    Open Energy Info (EERE)

    CONS TOT REV (THOUSAND ) TOT SALES (MWH) TOT CONS 2009-03 180,424 829,996 2,282,842 177,132 1,007,995 393,452 2,556 15,772 240 104 656 5 360,216 1,854,419 2,676,539 2009-02...

  3. 2,3,7,8-TCDD enhances the sensitivity of mice to concanavalin A immune-mediated liver injury

    SciTech Connect (OSTI)

    Fullerton, Aaron M.; Roth, Robert A.; Ganey, Patricia E.

    2013-01-15

    Inflammation plays a major role in immune-mediated liver injury, and exposure to environmental pollutants such as 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) has been reported to alter the inflammatory response as well as affect immune cell activity. In this study, we tested the hypothesis that TCDD pretreatment exacerbates hepatotoxicity in a murine model of immune-mediated liver injury induced by concanavalin A (Con A) administration. Mice were pretreated with 30 ?g/kg TCDD or vehicle control on day zero and then given either Con A or saline intravenously on day four. Mice treated with TCDD did not develop liver injury; however, TCDD pretreatment increased liver injury resulting from moderate doses of Con A (410 mg/kg). TCDD-pretreated mice had altered plasma concentrations of inflammatory cytokines, including interferon gamma (IFN?), and TCDD/Con A-induced hepatotoxicity was attenuated in IFN? knockout mice. At various times after treatment, intrahepatic immune cells were isolated, and expression of cell activation markers as well as cytolytic proteins was determined. TCDD pretreatment increased the proportion of activated natural killer T (NKT) cells and the percent of cells expressing Fas ligand (FasL) after Con A administration. In addition FasL knockout mice and mice treated with CD18 antiserum were both protected from TCDD/Con A-induced hepatotoxicity, suggesting a requirement for direct cellcell interaction between effector immune cells and parenchymal cell targets in the development of liver injury from TCDD/Con A treatment. In summary, exposure to TCDD increased NKT cell activation and exacerbated immune-mediated liver injury induced by Con A through a mechanism involving IFN? and FasL expression. -- Highlights: ? TCDD pretreatment sensitizes mice to Con A-induced hepatotoxicity. ? TCDD pretreatment increased concentration of IFN? in plasma after Con A. ? Con A-induced activation of NKT cells was increased by TCDD pretreatment. ? FasL-positive NKT cells increased with TCDD pretreatment versus Con A alone. ? IFN? and FasL are critical to the development of liver injury from TCDD/Con A.

  4. Ayuda:Redirecciones | Open Energy Information

    Open Energy Info (EERE)

    Pueden ser muy tiles en el caso de que un artculo sea definido con varios nombres o que presente una puntuacin distinta, est escrita en maysculas o que su ortografa...

  5. TO: FILE

    Office of Legacy Management (LM)

    Con' trol E Health .Physics Protection 0 AECllED managed operations c Little or None G AECMED responsible for C .AECr*,ED responsibility accountability E Contractoi'responsibili...

  6. RESEARCH ARTICLE

    Office of Scientific and Technical Information (OSTI)

    of the Basque government. This work was supported in part by the U.S Department of Energy under con- tract DE-AC02-06CH11357 and was completed with resources provided by the...

  7. SAS Output

    U.S. Energy Information Administration (EIA) Indexed Site

    2. Underground Coal Mining Productivity by State and Mining Method, 2014" "(short tons produced per employee hour)" "Coal-Producing State, Region1 and Mine Type","Continuous2","Con...

  8. Science and Society-Consequences of engineering

    ScienceCinema (OSTI)

    None

    2011-04-25

    Le conférencier Mons.Rorsch parle des possibles conséquences économiques et culturelles de la technologie en générale, aussi pour l'environnement

  9. Are You a Smart Grid Champion? | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Andy Oare Andy Oare Former New Media Strategist, Office of Public Affairs You've heard it a million times -- knowledge ... Watch this video from Con Edison of New York (recipient of ...

  10. Resea de gas natural, Programa de Tecnologas de Vehculos...

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    visite las pginas sobre gas natural del AFDC en www.afdc.energy.gov. El sitio Web "NGV Amrica", en www.ngvc.org, tambin cuenta con mucha informacin sobre gas...

  11. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... Sandia Site Office Savannah River Ecology Laboratory (SREL), Aiken, SC (United ... In contrast, for the guided mode the eld is con ned to the gap between the two metal ...

  12. Ayuda:Crear una nueva pgina | Open Energy Information

    Open Energy Info (EERE)

    en una pgina wiki se asemeja a lo siguiente: http:www.ejemplo.netindex.phpARTICULO o http:www.ejemplo.netwikiARTICULO Si reemplazamos ARTICULO con el nombre de la...

  13. Mexico-U

    U.S. Energy Information Administration (EIA) Indexed Site

    ... And I just mention one here because I noticed two slides from one site which is called E-Con browser run by an economist named Jim Hamilton - in fact one of the slides from ...

  14. schedule6_2010.xls

    U.S. Energy Information Administration (EIA) Indexed Site

    ... 2 2012 Ft. Lancaster Hamilton Rd. 17.21 OH 3278 AEPETT 100 10TPIT008Under Con Reliability 2010 US ERCOT - AC 121-150 2 2012 Illinois 4 Hamilton Rd. 97.63 OH 3278 AEPETT ...

  15. Quadrennial Energy Review Public Meeting #13: Energy Infrastructure...

    Broader source: Energy.gov (indexed) [DOE]

    ... of buildings are burning heavy fuel oil. ... To accommodate these projects, Con Edison added about a quarter of a mile of pipeline and ... has suppressed gas prices in the area. ...

  16. New Directions in Fuels Technology

    Broader source: Energy.gov [DOE]

    All fuels have their pros and cons that become evident at large scale, and while biofuels are a critical part of the energy future, they are not the only solution

  17. Analysis Reveals Impact of Road Grade on Vehicle Energy Use ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    with and without road grade for five vehicle models-con- ventional, hybrid, and all-electric midsized cars and conventional and hybrid SUVs. Aggregate results of the study...

  18. Xcel Energy- Solar*Rewards Community Program

    Broader source: Energy.gov [DOE]

    Legislation approved in 2010 allowed for the development of "community solar gardens" in Colorado. Under the rules of traditional net metering, a utility customer may offset their electricity con...

  19. Turn Motors Off When Not in Use | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This tip sheet discusses pros and cons of repeated motor starts and stops and provides suggested actions. Motor Systems Tip Sheet 10 PDF icon Turn Motors Off When Not in Use ...

  20. Interconnecting PV on New York City's Secondary Network Distribution System

    SciTech Connect (OSTI)

    Anderson, K.; Coddington, M.; Burman, K.; Hayter, S.; Kroposki, B.; Watson, A.

    2009-12-01

    This study describes technical assistance provided by NREL to help New York City and Con Edison improve the interconnection of distributed PV systems on a secondary network distribution system.

  1. EERE Blog | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    us at Baltimore Comic-Con for a discussion on the interplay of energy, cinema and television. September 22, 2015 Colorado Kicks Off Home Energy Score Program to Benefit Home...

  2. Energy Blog | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    us at Baltimore Comic-Con for a discussion on the interplay of energy, cinema and television. September 15, 2015 Explore this infographic to see how the Energy Department is...

  3. City of Dallas- Residential and Commercial Green Building Requirements

    Broader source: Energy.gov [DOE]

    Notably, Dallas became the first U.S. city to adopt the 2012 International Green Construction Code (with amendments, hereafter Dallas Green Construction Code) as mandatory for new commercial cons...

  4. Building America Whole-House Solutions for New Homes: Treasure...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Whole-House Solutions for New Homes: Treasure Homes, Sacramento, California Case study of Treasure Homes, who worked with SMUD, DOE, NREL, and ConSol to build ...

  5. Community Energy Strategic Planning - Step 2

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The engagement itself will conCnue throughout the energy planning process. 3 As you ... Energy Office and any county or regional planning offices. 5 6 Many large planning efforts ...

  6. TBB-0042- In the Matter of Curtis Hall

    Broader source: Energy.gov [DOE]

    This letter concerns the complaint of retaliation filed by Curtis Hall (the complainant or Mr. Hall) with the Department of Energy under 10 C . F. R. Part 7 0 8 , the DOE Con tractor Employee ...

  7. This Week In Petroleum Printer-Friendly Version

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    is shown comparing this year's data to monthly data from last year. There are pros and cons to comparing current weekly numbers to last year's monthly or weekly data. Comparing...

  8. Wave Energy | Open Energy Information

    Open Energy Info (EERE)

    Wave Energy Jump to: navigation, search Contents 1 Description 2 History 3 Technology 4 Current and Possible Wave Farms 5 Pros and Cons Description Wave energy (or wave power) is...

  9. Building America Top Innovations Hall of Fame Profile … High...

    Energy Savers [EERE]

    ... said Rob Hammon of ConSol. * SMUD learned that west-facing systems contributed more to peak-demand reduction, which has helped shape their future solar electric incentive programs. ...

  10. NY-Sun PV Incentive Program (Residential, Low-Income, and Small Business)

    Broader source: Energy.gov [DOE]

    NYSERDA has established separate megawatt (MW) budgets for different regions of the state. These MW block targets are specified for three regions: areas served by Con Edison, areas served by PSEG...

  11. BPA-2012-00412-FOIA Response

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Information Act (FOIA) 5 U.S. 552. You rea nested a con y of: 1. Rate 13PA pays contracting agency, TEKSystems, for contract employee Michael J. Rice (myself) 2. The official...

  12. U.S. President Bill Clinton,

    National Nuclear Security Administration (NNSA)

    ... level of confidence in the safety and reliability of nuclear weapons in the active ... level of con- fidence in the safety or reliability of a nuclear weapon type that the two ...

  13. Layout And Results From The Initial Opeeration Of The High-resolution...

    Office of Scientific and Technical Information (OSTI)

    Layout And Results From The Initial Opeeration Of The High-resolution X-ray Imaging ... The nal hardware design and con guration are detailed along with the calibration ...

  14. Alternative Fuels Data Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Plug-In Electric Vehicle (PEV) Voluntary Time of Use (TOU) Rate Price Guarantee - Con Edison Under the voluntary TOU rate, residential customers will pay a reduced price for...

  15. Tips: Home Office and Electronics | Department of Energy

    Energy Savers [EERE]

    power con-tinuously, even when the laptop is not plugged into the adapter. Using the power management settings on computers and monitors can cause significant savings. It is a...

  16. Real-Time Characterization of Special Nuclear Materials

    SciTech Connect (OSTI)

    Walston, Sean; Candy, Jim; Chambers, Dave; Chandrasekaran, Hema; Snyderman, Neal

    2015-09-04

    When confronting an item that may contain nuclear material, it is urgently necessary to determine its characteristics. Our goal is to provide accurate information with high-con dence as rapidly as possible.

  17. untitled

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... of lo mma ray log orrelation is sh Fi sex shale of eet is laminat s the basin, w ... limestone gives an illust monstrates t sex shale and n the structural m nalysis is con ...

  18. Ms. Paula Call NEPA Document Manager US Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... the EA Scoping Period for Land Con veyance of 4,413 acres ... to Richland utilities and the future natural gas pipeline. ... Also, the Port of Benton has requirements for ordinary ...

  19. SolarTec AG | Open Energy Information

    Open Energy Info (EERE)

    SolarTec AG Place: Munich, Bavaria, Germany Product: Developing a technology it calls Sol*Con- 700x Fresnel concentrators for use with gallium arsenide or germanium cells, also...

  20. Consolidated Edison Sol Inc (Texas) | Open Energy Information

    Open Energy Info (EERE)

    Consolidated Edison Sol Inc Place: Texas Phone Number: 1-888-320-8991 Website: www.conedsolutions.comHome.as Twitter: @ConEdSolutions Facebook: https:www.facebook.com...

  1. Consolidated Edison Sol Inc | Open Energy Information

    Open Energy Info (EERE)

    Consolidated Edison Sol Inc Place: New York Phone Number: 1-888-320-8991 or 1-800-316-8011 Website: www.conedsolutions.comHome.as Twitter: https:twitter.comConEdSolutions...

  2. Consolidated Edison Sol Inc (Massachusetts) | Open Energy Information

    Open Energy Info (EERE)

    Consolidated Edison Sol Inc Place: Massachusetts Phone Number: (781) 203-2700 Website: www.conedsolutions.comHome.as Twitter: @ConEdSolutions Facebook: https:www.facebook.com...

  3. Consolidated Edison Sol Inc (Illinois) | Open Energy Information

    Open Energy Info (EERE)

    Consolidated Edison Sol Inc Place: Illinois Phone Number: 1-888-210-8899 Website: www.conedsolutions.comResiden Twitter: @ConEdSolutions Facebook: https:www.facebook.com...

  4. Energy Awareness Quiz

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tell students that the environmental problem that gets the most attention these days is global warming and the green- house effect. Ask students to list ways that everyone con-...

  5. Ayuda:Firmas | Open Energy Information

    Open Energy Info (EERE)

    - dos guiones (o un guin largo) junto con cuatro virgulillas (-- ) - deriva de la red Usenet, donde los dos guiones definen un bloque de firma. La cadena real de la firma...

  6. cover_booked.indd

    Office of Environmental Management (EM)

    This document is also available on the Department of Energy's web site: http:... This web-based system con- tains a variety of data elements on land, buildings, trailers ...

  7. United States

    Office of Legacy Management (LM)

    ... J O H N T. MYERS. VIRGINIA SMITH, ELDON RUDD, SILVro 0. CON-m (except amendments 2.3.12). ... WIII-XN " Jam T. MYERS. VIRGINIA SMITH, i MUON RDD. SILVIO 0. Cowl-E (except ...

  8. 2012 Smart Grid Peer Review Presentations - Day 2 Second Afternoon...

    Office of Environmental Management (EM)

    System - Bill Becker, Spirae PDF icon 2012 SG Peer Review - Interoperability of Demand Response Resources in New York - Andre Wellington, ConEd NY PDF icon 2012 SG Peer Review - ...

  9. Renewable Energy and Inter-Island Power Transmission (Presentation)

    SciTech Connect (OSTI)

    Gevorgian, V.

    2011-05-01

    This presentation summarizes recent findings pertaining to inter-island connection of renewable and other energy sources, in particular, as these findings relate cable options, routing, specifications, and pros and cons.

  10. Microsoft Word - 6 Los Alamos National Lab Community Leaders...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    they do for the community. * I would like to see an improvement in information on the pros and cons of environmental issues. Present a very even picture, that way the reports...

  11. Ayuda:Pginas de usuarios | Open Energy Information

    Open Energy Info (EERE)

    de sus intereses guardan relacin con el tema de la pgina wiki, como tambin hablar de sus contribuciones o las reas en la cuales usted desea trabajar. User scratchpad...

  12. OpenEI:Projects/Data Access | Open Energy Information

    Open Energy Info (EERE)

    and Mac (at least for Macs with Excel 2011+) Con: can only save results to cells (not to VBA variables for further processing) Link: http:www.officekb.comUweForum.aspx...

  13. Mr. William E. Mott, Acting Director Environmental Control Technology...

    Office of Legacy Management (LM)

    feet. It was an old-fashioned brick and mill con- struction building of the light manufacturing type; foundation wails were in general made of stone, and all exterior walls and...

  14. Coupling through tortuous path narrow slot apertures into complex...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... the regions are isolated by good electric con- ductors. ... the per-unit-length transmission-line parameters for the slot ... of the slot due to wall losses and the presence of a ...

  15. Doing Business with DOE's Solid-State Lighting Program

    Energy Savers [EERE]

    and businesses that use substan- tially less electricity, making them less dependent on fossil fuels. The U.S. Department of Energy con- ducts a comprehensive R&D program to...

  16. New Whole-House Solutions Case Study: Treasure Homes, Sacramento, California

    SciTech Connect (OSTI)

    none,

    2013-09-01

    The builder worked with SMUD, DOE, NREL, and ConSol to build HERS-54 homes with high-efficiency HVAC, ducts buried in attic insulation, SmartVent cooling, and rooftop PV..

  17. Blog | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    en casa? | Photo courtesy of Joe Guasti, Bergey Windpower Co., Inc.. Ahorra energa y dinero con el viento: 5 pasos antes de invertir en un nuevo sistema elico Te interesa en...

  18. 2011 - 04 | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Phishing Alert Mon, 04252011 - 3:00pm RadCon Hosts Webinar on April 26: Lessons of Fukushima Daiichi Wed, 04132011 - 3:00pm Get in on Home Energy Savings With 'Next Step' ...

  19. Gas Clean-Up for Fuel Cell Applications Workshop Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... in pos eum quo con et grid electricity is unavailable and the fuel effciency, reliability and environment friendliness of the fuel cell is of greatest beneft to the client. ...

  20. Radio frequency (RF) microwave components and subsystems using loaded ridge waveguide

    DOE Patents [OSTI]

    Kang, Yoon W.

    2013-08-20

    A waveguide having a non-conductive material with a high permeability (.mu., .mu..sub.r for relative permeability) and/or a high permittivity (.di-elect cons., .di-elect cons..sub.r for relative permittivity) positioned within a housing. When compared to a hollow waveguide, the waveguide of this invention, reduces waveguide dimensions by .varies..mu. ##EQU00001## The waveguide of this invention further includes ridges which further reduce the size and increases the usable frequency bandwidth.

  1. Highlights of SunShot Projects: Interconnection as Part of a Strategic Resources Planning Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Highlights of SunShot Projects: Interconnection as Part of a Strategic Resource Planning Process" Virginia Lacy and Mark Dyson with RMI Electricity Practice and Alison Kling with Con Edison September 24, 2014 2 Speakers Alison Kling Distributed Generation Specialist Con Edison Virgina Lacy Principal RMI Electricity Practice Kristen Ardani Solar Analyst National Renewable Energy Laboratory (DGIC moderator) Mark Dyson Senior Associate RMI Electricity Practice A POTENTIAL eLAB INITIATIVE

  2. Orange and Rockland Case Study

    Energy Savers [EERE]

    10 2012 Orange and Rockland Case Study 1 Voltage Control Device A "Model-Centric" Approach to Smarter Electric Distribution Systems Orange and Rockland Utilities (ORU), is an investor-owned utility and a subsidiary of Consolidated Edison Incorporated (Con Edison), and is located in suburban New York, New Jersey, and Pennsylvania, west of New York City. ORU is a key participant in Con Edison's $272 million Smart Grid Investment Grant (SGIG) project to modernize electric distribution

  3. DOE-HDBK-1106-97

    Broader source: Energy.gov [DOE]

    Radiological Contamination Control Training for Laboratory Research Change Notice 2 with Reaffirmation (January 2007) | Cancelled This program management guide describes the proper implementation standard for core training as outlined in the DOE Radiological Control (RadCon) Standard. The guide is to assist those individuals, both within the Department of Energy (DOE) and Managing and Operating (M&O) contractors, identified as having responsibility for implementing the core training recommended by the RadCon Standard.

  4. DOE-HDBK-1106-97

    Broader source: Energy.gov [DOE]

    Radiological Contamination Control Training for Laboratory Research Change Notice 1 (March 2002) | Reaffirmation with Errata (August 2002) This program management guide describes the proper implementation standard for core training as outlined in the DOE Radiological Control (RadCon)Standard. The guide is to assist those individuals, both within the Department of Energy (DOE) and Managing and Operating (M&O) contractors, identified as having responsibility for implementing the core training recommended by the RadCon Standard.

  5. Framework for Adaptable Operating and Runtime Systems: Final Project Report

    SciTech Connect (OSTI)

    Patrick G. Bridges

    2012-02-01

    In this grant, we examined a wide range of techniques for constructing high-performance con#12;gurable system software for HPC systems and its application to DOE-relevant problems. Overall, research and development on this project focused in three specifc areas: (1) software frameworks for constructing and deploying con#12;gurable system software, (2) applcation of these frameworks to HPC-oriented adaptable networking software, (3) performance analysis of HPC system software to understand opportunities for performance optimization.

  6. Structure/Function Studies of Proteins Using Linear Scaling Quantum Mechanical Methodologies

    SciTech Connect (OSTI)

    Merz, K. M.

    2004-07-19

    We developed a linear-scaling semiempirical quantum mechanical (QM) program (DivCon). Using DivCon we can now routinely carry out calculations at the fully QM level on systems containing up to about 15 thousand atoms. We also implemented a Poisson-Boltzmann (PM) method into DivCon in order to compute solvation free energies and electrostatic properties of macromolecules in solution. This new suite of programs has allowed us to bring the power of quantum mechanics to bear on important biological problems associated with protein folding, drug design and enzyme catalysis. Hence, we have garnered insights into biological systems that have been heretofore impossible to obtain using classical simulation techniques.

  7. Transuranic Waste Transportation Containers - Fact Sheet

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Types of Containers Container Waste Type Status of Certification T RU PA CT -II Con tact-H andled Approved by NRC , August 1989 H alf P AC T Con tact-H andled Approved by NRC , November 2000 RH -72B Rem ote-H andled Approved by NRC , March 2000 . . . a critical step toward solving the nation's nuclear waste disposal problem Transuranic Waste Transportation Containers In 1980, the U.S. Department of Energy (DOE) committed to transporting transuranic radioactive waste to the Waste Isolation Pilot

  8. Michael A. McGuire* and Orlando Rios

    Office of Scientific and Technical Information (OSTI)

    Evolution of magnetic properties and microstructure of Hf2ConB alloys Michael A. McGuire* and Orlando Rios Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831 USA Amorphous Hf2ConB alloys produced by melt-spinning have been crystallized by annealing at 500-800 °C, and the products have been investigated using magnetization measurements, x-ray diffraction, and scanning electron microscopy. The results reveal the evolution of the phase fractions, microstructure, and magnetic properties with

  9. PDSF User Meeting 05-05-15.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Lisa Gerhardt Utilization --- 2 --- Past Outages * 4/21/15 (3 hours): project degraded * 4/22/15 ( 3 d ays): p roject d egraded ( PDSF p rojecCo turned off) Planned Outages * None PDSF Move Update * Data m igraCon t o p roject / n ew s torage: N ow * Mendel + i nstallaCon ( 3 w eeks): J uly * Mendel m ove ( 3 w eeks): A ugust * PDSF s torage ( 2 w eeks): A ugust * Turn o ff o ld c omputes: S eptember? * Carver r eCres: e nd o f S eptember * Project ( 3 w eeks d eg, 1 day): November Retiring

  10. O:\EA-157.ORD

    Energy Savers [EERE]

    Consolidated Edison Company of New York, Inc. Order No. EA-157 I. BACKGROUND Exports of electric energy from the United States to a foreign country are regulated and require authorization under Section 202(e) of the Federal Power Act (FPA) (16 U.S.C.§824a(e)). On September 18, 1997, Consolidated Edison Company of New York, Inc. (Con Edison) applied to the Office of Fossil Energy (FE) of the Department of Energy (DOE) for authorization to transmit electric energy to Canada. Con Edison is a

  11. ,"U.S. Natural Gas Consumption by End Use"

    U.S. Energy Information Administration (EIA) Indexed Site

    11,"Annual",2015,"6/30/1930" ,"Release Date:","4/29/2016" ,"Next Release Date:","5/31/2016" ,"Excel File Name:","ng_cons_sum_dcu_nus_a.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/ng/ng_cons_sum_dcu_nus_a.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov" ,,"(202) 586-8800",,,"4/29/2016

  12. Alternative Fuel and Advanced Technology Commercial Lawn Equipment (Spanish Version) (Brochure), Clean Cities, Energy Efficiency & Renewable Energy (EERE)

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Utilizar combustibles alternativos o tecnología avanzada en los motores del equipo comercial de jardinería es una manera efectiva de reducir la dependencia del petróleo que tiene el país, reducir las emisiones contaminantes y disminuir el impacto ambiental de la industria. Actualmente, hay numerosas cortadoras de césped que funcionan con combustibles alternativos y con tecnología avanzada de consumo eficiente. Los dueños deciden utilizar estas cortadoras porque permiten ahorrar en

  13. Formation and Sustainment of ITPs in ITER with the Baseline Heating Mix

    SciTech Connect (OSTI)

    Francesca M. Poli and Charles Kessel

    2012-12-03

    Plasmas with internal transport barriers (ITBs) are a potential and attractive route to steady-state operation in ITER. These plasmas exhibit radially localized regions of improved con nement with steep pressure gradients in the plasma core, which drive large bootstrap current and generate hollow current pro les and negative shear. This work examines the formation and sustainment of ITBs in ITER with electron cyclotron heating and current drive. It is shown that, with a trade-o of the power delivered to the equatorial and to the upper launcher, the sustainment of steady-state ITBs can be demonstrated in ITER with the baseline heating con guration.

  14. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Annual",2015,"6/30/1936" ,"Release Date:","4/29/2016" ,"Next Release Date:","8/31/2016" ,"Excel File Name:","pet_cons_psup_dc_nus_mbblpd_a.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_cons_psup_dc_nus_mbblpd_a.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov" ,,"(202)

  15. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Monthly","2/2016","1/15/2012" ,"Release Date:","4/29/2016" ,"Next Release Date:","5/31/2016" ,"Excel File Name:","ng_cons_heat_a_epg0_vgth_btucf_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/ng/ng_cons_heat_a_epg0_vgth_btucf_m.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov" ,,"(202)

  16. MEMORANDUM TCZ F I L E FROM:

    Office of Legacy Management (LM)

    Contractor had total control d unknown WATESIALS H A N D L E D : Lyg con bagis of records reviewed) E Health Physics Protection . fi L i t t l e o r N o n e if AECMED r e s p o ...

  17. Science and Society

    ScienceCinema (OSTI)

    None

    2011-04-25

    Le conférencier (qui? L'introduction manque) est économiste et directeur d'un institut de recherche. Il parlera des conséquences économiques désastreuses des dépenses militaires.

  18. BtetaIIurgicaI Eafioratorp

    Office of Legacy Management (LM)

    and laiajent OS a euoaeasSul mhhod. Report" your letter exporiment5l work InE: that It bo. conSlrtnin(iqyitru8tiona toyoub authoPis0 you to ship biXlen@us ILmarLal Institute,...

  19. URANOUS IODATE AS A CARRIER FOR PLUTONIUM

    DOE Patents [OSTI]

    Miller, D.R.; Seaborg, G.T.; Thompson, S.G.

    1959-12-15

    A process is described for precipitating plutonium on a uranous iodate carrier from an aqueous acid solution conA plutonium solution more concentrated than the original solution can then be obtained by oxidizing the uranium to the hexavalent state and dissolving the precipitate, after separating the latter from the original solution, by means of warm nitric acid.

  20. DOE-HDBK-1106-1997

    Broader source: Energy.gov [DOE]

    Radiological Contamination Control Training for Laboratory Research Reaffirmation (August 2002) | Change Notice 1 (December 2004) | Change Notice 2 with Reaffirmation (January 2007) This program management guide describes the proper implementation standard for core training as outlined in the DOE Radiological Control (RadCon) Standard.

  1. Wells Rural Electric Co (Utah) | Open Energy Information

    Open Energy Info (EERE)

    TOT SALES (MWH) TOT CONS 2009-03 46 519 490 71 957 210 55 979 5 172 2,455 705 2009-02 52 607 492 69 1,045 211 46 797 5 167 2,449 708 2009-01 57 672 490 77 1,053 211 51 899 5 185...

  2. Eia.gov BETA - Analysis & Projections - U.S. Energy Information...

    U.S. Energy Information Administration (EIA) Indexed Site

    Definiciones mapa English Franais Espaol A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Explorar los trminos relacionados con las siguientes categoras: puntos de cruce ...

  3. Interoperability of Demand Response Resources Demonstration in NY

    SciTech Connect (OSTI)

    Wellington, Andre

    2014-03-31

    The Interoperability of Demand Response Resources Demonstration in NY (Interoperability Project) was awarded to Con Edison in 2009. The objective of the project was to develop and demonstrate methodologies to enhance the ability of customer sited Demand Response resources to integrate more effectively with electric delivery companies and regional transmission organizations.

  4. Dayton Power & Light Co | Open Energy Information

    Open Energy Info (EERE)

    REV (THOUSAND ) TOT SALES (MWH) TOT CONS 2009-03 42,929 405,917 457,328 32,828 369,986 56,335 12,936 163,248 1,748 38 375 1 88,731 939,526 515,412 2009-02 50,501 495,479 457,129...

  5. McKenzie Electric Coop Inc | Open Energy Information

    Open Energy Info (EERE)

    (THOUSAND ) TOT SALES (MWH) TOT CONS 2009-03 4.139 55.309 113 0.083 0.047 2 4.222 55.356 115 2009-02 5.066 56.074 114 0.083 0.044 2 5.149 56.118 116 2009-01 4.899 69.559 114...

  6. Secure Interoperable Open Smart Grid Demonstration Project

    SciTech Connect (OSTI)

    Magee, Thoman

    2014-12-31

    The Consolidated Edison, Inc., of New York (Con Edison) Secure Interoperable Open Smart Grid Demonstration Project (SGDP), sponsored by the United States (US) Department of Energy (DOE), demonstrated that the reliability, efficiency, and flexibility of the grid can be improved through a combination of enhanced monitoring and control capabilities using systems and resources that interoperate within a secure services framework. The project demonstrated the capability to shift, balance, and reduce load where and when needed in response to system contingencies or emergencies by leveraging controllable field assets. The range of field assets includes curtailable customer loads, distributed generation (DG), battery storage, electric vehicle (EV) charging stations, building management systems (BMS), home area networks (HANs), high-voltage monitoring, and advanced metering infrastructure (AMI). The SGDP enables the seamless integration and control of these field assets through a common, cyber-secure, interoperable control platform, which integrates a number of existing legacy control and data systems, as well as new smart grid (SG) systems and applications. By integrating advanced technologies for monitoring and control, the SGDP helps target and reduce peak load growth, improves the reliability and efficiency of Con Edison’s grid, and increases the ability to accommodate the growing use of distributed resources. Con Edison is dedicated to lowering costs, improving reliability and customer service, and reducing its impact on the environment for its customers. These objectives also align with the policy objectives of New York State as a whole. To help meet these objectives, Con Edison’s long-term vision for the distribution grid relies on the successful integration and control of a growing penetration of distributed resources, including demand response (DR) resources, battery storage units, and DG. For example, Con Edison is expecting significant long-term growth of DG. The SGDP enables the efficient, flexible integration of these disparate resources and lays the architectural foundations for future scalability. Con Edison assembled an SGDP team of more than 16 different project partners, including technology vendors, and participating organizations, and the Con Edison team provided overall guidance and project management. Project team members are listed in Table 1-1.

  7. Evaluation of the dosimetric impact of applying flattening filter-free beams in intensity-modulated radiotherapy for early-stage upper thoracic carcinoma of oesophagus

    SciTech Connect (OSTI)

    Zhang, Wuzhe; Lin, Zhixiong; Yang, Zhining; Fang, Weisheng; Lai, Peibo; Lu, Jiayang; Wu, Vincent WC

    2015-06-15

    Flattening filter-free (FFF) radiation beams have recently become clinically available on modern linear accelerators in radiation therapy. This study aimed to evaluate the dosimetric impact of using FFF beams in intensity-modulated radiotherapy (IMRT) for early-stage upper thoracic oesophageal cancer. Eleven patients with primary stage upper thoracic oesophageal cancer were recruited. For each patient, two IMRT plans were computed using conventional beams (Con-P) and FFF beams (FFF-P), respectively. Both plans employed a five-beam arrangement and were prescribed with 64 Gy to (planning target volume) PTV1 and 54 Gy to PTV2 in 32 fractions using 6 MV photons. The dose parameters of the target volumes and organs at risks (OARs), and treatment parameters including the monitor units (MU) and treatment time (TT) for Con-P and FFF-P were recorded and compared. The mean D{sub 5} of PTV1 and PTV2 were higher in FFF-P than Con-P by 0.4 Gy and 0.3 Gy, respectively. For the OARs, all the dose parameters did not show significant difference between the two plans except the mean V{sub 5} and V{sub 10} of the lung in which the FFF-P was lower (46.7% vs. 47.3% and 39.1% vs. 39.6%, respectively). FFF-P required 54% more MU but 18.4% less irradiation time when compared to Con-P. The target volume and OARs dose distributions between the two plans were comparable. However, FFF-P was more effective in sparing the lung from low dose and reduced the mean TT compared with Con-P. Long-term clinical studies are suggested to evaluate the radiobiological effects of FFF beams.

  8. Simulating Valence-to-Core X-ray Emission Spectroscopy of Transition Metal Complexes with Time-Dependent Density Functional Theory

    SciTech Connect (OSTI)

    Zhang, Yu; Mukamel, Shaul; Khalil, Munira; Govind, Niranjan

    2015-11-09

    Valence-to-core (VtC) X-ray emission spectroscopy (XES) has emerged as a power- ful technique for the structural characterization of complex organometallic compounds in realistic environments. Since the spectrum represents electronic transitions from the ligand molecular orbitals to the core holes of the metal centers, the approach is more chemically sensitive to the metal-ligand bonding character compared with con- ventional X-ray absorption techniques. In this paper we study how linear-response time-dependent density functional theory (LR-TDDFT) can be harnessed to simulate K-edge VtC X-ray emission spectra reliably. LR-TDDFT allows one to go beyond the single-particle picture that has been extensively used to simulate VtC-XES. We con- sider seven low- and high-spin model complexes involving chromium, manganese and iron transition metal centers. Our results are in good agreement with experiment.

  9. Enhanced T-lymphocyte blastogenic response to tuberculin (PPD) in children of northeast (NE) Thailand supplemented with vitamin A (VA) and zinc (Zn)

    SciTech Connect (OSTI)

    Kramer, T.R.; Udomkesmalee, E.; Dhanamitta, S.; Sirisinha, S.; Charoenkiatkul, S.; Tantipopipat, S.; Banjong, O.; Rojroongwasinkul, N.; Smith, J.C. Jr. Mahidol Univ., Nakhon Pathom )

    1991-03-15

    Beneficial effects of Va and/or Zn supplementation of children in NE Thailand are described in a companion abstract. In the same study, blastogenic response (BR) of T-lymphocytes to concanavalin-A (ConA) and PPD were assayed in cultures containing mononuclear cells (MNC) or whole blood (WB). Methods were previously described. Children were previously vaccinated with BCG. BR to ConA of MNC or WB from children supplemented with VA, Zn, VA + Zn or placebo were similar. BR to PPD of MNC was higher in children receiving VA + Zn than placebo, but not in children supplemented with VA or Zn alone. Data indicate that children with suboptimal VA and Zn nutriture supplemented with < 2 times RDA of these nutrients showed enhanced cellular immunity to PPD. This observation is relevant to BCG immunization program and thus may benefit public health.

  10. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    1,"Monthly","2/2016","1/15/2001" ,"Release Date:","4/29/2016" ,"Next Release Date:","5/31/2016" ,"Excel File Name:","ng_cons_sum_a_epg0_vc0_mmcf_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/ng/ng_cons_sum_a_epg0_vc0_mmcf_m.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov" ,,"(202)

  11. LED Watch: NGL Tells Us the State of Solid-State

    Energy Savers [EERE]

    LD+A July 2015 www.ies.org EVOLVING WITH THE MARKET Over the years, NGL has evolved to meet the market's changing needs. In 2015, the Indoor NGL focused on con- trollability and serviceability, and the Outdoor NGL focused on serviceability and pedestrian scale-with submissions limited to selected product types to per- mit additional attention to those key attributes, which have been generating strong market interest. NGL judging involves an intense three- step process that combines personal

  12. Lessons Learned from Cyber Security Assessments of SCADA and Energy Management Systems

    Energy Savers [EERE]

    U.S. Department of Energy Office of Electricity Delivery and Energy Reliability Enhancing control systems security in the energy sector NSTB September 2006 LESSONS LEARNED FROM CYBER SECURITY ASSESSMENTS OF SCADA AND ENERGY MANAGEMENT SYSTEMS Raymond K. Fink David F. Spencer Rita A. Wells NSTB INL/CON-06-11665 iii ABSTRACT Results from ten cyber security vulnerability assessments of process control, SCADA, and energy management systems, or components of those systems, were reviewed to identify

  13. Management Overview

    Energy Savers [EERE]

    Framework for Operational Concepts and Human-Automation Collaboration Johanna Oxstrand Jacques Hugo Katya LeBlanc Idaho National Laboratory Advanced Reactor Technologies Advanced Materials R&D Program Review Framework for Operational Concepts and Human-Automation Collaboration 2  Develop Operational Concepts (OpsCon) for Advanced Reactors to inform system, functional & operational design and licensing basis to ensure that operational requirements are included in system design. 

  14. Building America Whole-House Solutions for New Homes: Treasure Homes,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sacramento, California | Department of Energy Treasure Homes, Sacramento, California Building America Whole-House Solutions for New Homes: Treasure Homes, Sacramento, California Case study of Treasure Homes, who worked with SMUD, DOE, NREL, and ConSol to build HERS-54 homes with high-efficiency HVAC, ducts buried in attic insulation, SmartVent cooling, and rooftop PV. PDF icon Treasure Homes: Fallen Leaf at Riverbend - Sacramento, CA More Documents & Publications Building America

  15. Health Safety & Environmental Protection Committee Site Risks:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    & Environmental Protection Committee Site Risks:  Radiation - alpha, gamma, beta, neutrons o Plutonium (joint w/ TWC) - IM: Becky, Tom  What is the possibility of criticality?  Sludge samples - is disturbance allowed?  How many tanks are affected?  How is plutonium being monitored? o Plutonium Finishing Plant (PFP) - IM: Tom o RAD Con program - IM: Tom  Chemical o Beryllium - IM: Keith, Mike  continue to monitor o Chemical vapors: IM: Tom  Concern that Industrial

  16. SOUTHWESTERN POWER ADMINISTRATION ANNUAL REPORT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ADMINISTRATION ANNUAL REPORT 20 10 This page inTenTionally lefT blank. S o u t h w e S t e r n p o w e r a d m i n i S t r at i o n pa g e 1 2010 a n n u a l r e p o r t Table of conTenTs Letter to the Secretary ------------------------------------------------------------------------------------- 3 Southwestern System Map ------------------------------------------------------------------------------- 4 About Southwestern

  17. SOUTHWESTERN POWER ADMINISTRATION ANNUAL REPORT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 S o u t h w e S t e r n p o w e r a d m i n i S t r at i o n pa g e 1 2012 a n n u a l r e p o r t Table of conTenTs Letter to the Secretary ------------------------------------------------------------------------------------- 3 Southwestern System Map ------------------------------------------------------------------------------- 4 About Southwestern --------------------------------------------------------------------------------------- 5 Supplementary Information

  18. Technical Sessions Parameterization of Convective Clouds, Mesoscale Convective Systems,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Parameterization of Convective Clouds, Mesoscale Convective Systems, and Convective-Generated Clouds W. R. Cotton Department of Atmospheric Science Colorado State University Fort Collins, CO 80523 This presentation is a summary of research progress supported under the Atmospheric Radiation Measurement (ARM) project entitled "Parameterization of Convective Clouds, Mesoscale Convective Systems, and Con'o'ective-Generated Clouds." The approach used in this research is to perform explicit

  19. X:\ARM_19~1\P377-392.WPD

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Session Papers 381 Figure 1. Annual behavior of the aerosol number density in the ground atmospheric layer (-) and of its column density (through the mixing layer) (o-o); vertical bars show rms deviations. Some Results of an Experimental Study of the Atmospheric Aerosol in Tomsk: A Combined Approach V. V. Zuev Institute of Atmospheric Optics Siberian Branch of the Russian Academy of Sciences Tomsk, Russia As widely accepted, the atmospheric aerosol strongly con- tributes to the formation of the

  20. Wireless Occupancy Sensors for Lighting Controls: An Applications Guide for

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federal Facility Managers | Department of Energy Occupancy Sensors for Lighting Controls: An Applications Guide for Federal Facility Managers Wireless Occupancy Sensors for Lighting Controls: An Applications Guide for Federal Facility Managers This fact sheet provides federal facility managers with an overview of the energy savings potential of wireless lighting occupancy sensors for room types, cost considerations, key steps to successful installation of wireless sensors, pros and cons of

  1. Ponte en onda: prende la energía limpia, (Spanish) Get Current

    SciTech Connect (OSTI)

    2015-05-01

    Cambiar a tecnologías de energía limpia significa que fortalecemos la economía y protegemos al medio ambiente. Este libreto de actividades educativas para todas las edades promueve el uso consciente de la energía, con datos de distintas formas de energía aplicables y una variedad de rompecabezas y crucigramas en temas energéticos.

  2. ch_9

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    COVER SHEET Responsible Agency: Lead Federal Agency: U.S. Department of Energy (DOE) Cooperating Agency: The State of Idaho Title: Contact: For additional information on this EIS and the tribal, agency and public involvement process con- ducted in conjunction with its preparation, write or call: This Final EIS is composed of a Summary, Chapters 1 through 13, and appendices. Copies of the EIS or appendices may be requested from Richard Kimmel at the address, phone number, or email address shown

  3. labnews04-29-16.qxp_la02_02-20-04

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    S andia won a three-year DOE con- tract to continue managing the US Regional Test Centers (RTCs), a network of five sites across the country where industry can assess the perfor- mance, reliability, and bankability of solar photovoltaic (PV) technologies. The program currently has more than 12 industry part- ners and 300 kilowatts of PV installed in different stages of development. "These centers are helping demonstrate that products per- form as predicted over time and in different

  4. ln 01-222-16.qxp_la02_02-20-04

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    driving force Sandia spent roughly $983 million on goods and ser- vices in fiscal year 2015, up nearly $21 million from the previous year, and New Mexico businesses received more than $381 million, or 39 percent of the total, according to the Labs' latest economic impact report. US small businesses received more than 52 percent of the available dollars, about $519 million in Sandia con- tracts, with the New Mexico share totaling $259 million, or 68 percent of the small business total. Compared

  5. Wisconsin State Historic Preservation Programmatic Agreement | Department

    Energy Savers [EERE]

    Federal Facility Managers | Department of Energy Occupancy Sensors for Lighting Controls: An Applications Guide for Federal Facility Managers Wireless Occupancy Sensors for Lighting Controls: An Applications Guide for Federal Facility Managers This fact sheet provides federal facility managers with an overview of the energy savings potential of wireless lighting occupancy sensors for room types, cost considerations, key steps to successful installation of wireless sensors, pros and cons of

  6. Using Smart Grid Technologies to Modernize Distribution Infrastructure in New York

    Energy Savers [EERE]

    Under the American Recovery and Reinvestment Act of 2009, the U.S. Department of Energy and the electricity industry have jointly invested over $7.9 billion in 99 cost-shared Smart Grid Investment Grant projects to modernize the electric grid, strengthen cybersecurity, improve interoperability, and collect an unprecedented level of data on smart grid and customer operations. 1. Summary Consolidated Edison's (Con Edison) Smart Grid Investment Grant (SGIG) project focuses on the modernization of

  7. Stockbridge-Munsee Health & Wellness Center and Family Center Renewable Energy Feasibility Study

    Energy Savers [EERE]

    Stockbridge-Munsee Health & Wellness Center & Family Center Renewable Energy Feasibility Study. Stockbridge-Munsee Tribal Overview * A Band of Mohican Indians * From the Algonquin language group of Tribes. Papscanee Village Site Painting follows archeological reports & accurately depicts pre European village. Tribal History * The tribe lived along the Muh-he-con-ne-ok River, "where the waters are never still". (now the Hudson River) * The Stockbridge name came from the town

  8. DOE F 2050-11

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2050.11 OMB Control No. (2-87) 1910-0800 (Previous GC-792) Contractor Interim Certification Final Certification DOE Prime and/or Subcontract Nos. Contractor hereby certifies that: 1. All procedures for identifying and disclosing subject inventions as required by the patent clause of the con- tract have been followed throughout the reporting period. 2. There were no subcontracts or purchase orders involving research, development, and demonstration except as follows: [State none when applicable.]

  9. 2013 Fuel Cell Technologies Market Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 Fuel Cell Technologies Market Report Fuel Cell Technologies Office November 2014 (This page intentionally left blank) Section title Unt utaerest in pos eum quo con et i Authors This report was compiled and written by Sandra Curtin and Jennifer Gangi of the Breakthrough Technologies Institute, Inc., in Washington, D.C. Acknowledgement The authors relied upon the hard work and valuable contributions of many men and women in government and in the fuel cell industry. The authors especially wish to

  10. A History

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of the United States Atomic Energy Commission Volume II 1947/1952 Morale /Meld Richard G. Hewlett / Francis Duncan 1972 U.S. Atomic Energy Commission CONTENTS FOREWORD BY THE CHAIRMAN, HISTORICAL ADVISORY COMMITTEE xi PREFACE xiii 1 THE TERRIBLE RESPONSIBILITY 1 Historical setting; the confirmation hearings, Janu- ary-March 1947. 2 UNCERTAIN MANDATE 15 Initial organization and staffing; initial policy con- siderations in weapons, production, and research; the report to the President, April 3,

  11. Provo City Corp (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    (MWH) TOT CONS 2009-03 1,368 18,290 30,311 1,749 28,411 4,779 437 10,070 1 3,554 56,771 35,091 2009-02 1,552 20,914 30,371 1,847 31,146 4,792 451 10,886 1 3,850 62,946 35,164...

  12. Explorer : des clés pour mieux comprendre la matière

    ScienceCinema (OSTI)

    None

    2011-10-06

    Le LHC va-t-il bouleverser les théories de l'infiniment petit ? Les physiciens aimeraient que l'accélérateur fasse trembler le modèle standard. Cette théorie des particules élémentaires et des forces laisse de nombreuses zones d'ombre. Le LHC et ses expériences ont été conçus pour les éclairer.

  13. P417755_IndirectDirectDrivePlatforms_NUG14_v8

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ignition Facility * Lawrence Livermore National Laboratory * Operated by the U.S. Department of Energy This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344. P417755_Platforms_Ma LLNL-POST-649443 Indirect and Direct Drive Implosion Platforms on the National Ignition Facility Diagnostic Con guration Warm Targets Indirect Drive Platforms Why Implosions? Direct Drive Platforms Cryogenic Targets Nuclear

  14. Rechargeable aluminum batteries with conducting polymers as positive

    Office of Scientific and Technical Information (OSTI)

    electrodes. (Technical Report) | SciTech Connect Technical Report: Rechargeable aluminum batteries with conducting polymers as positive electrodes. Citation Details In-Document Search Title: Rechargeable aluminum batteries with conducting polymers as positive electrodes. This report is a summary of research results from an Early Career LDRD project con-ducted from January 2012 to December 2013 at Sandia National Laboratories. Demonstrated here is the use of conducting polymers as active

  15. Modeling Mathematical Programs with Equilibrium Constraints in Pyomo

    SciTech Connect (OSTI)

    Hart, William E.; Siirola, John Daniel

    2015-07-01

    We describe new capabilities for modeling MPEC problems within the Pyomo modeling software. These capabilities include new modeling components that represent complementar- ity conditions, modeling transformations for re-expressing models with complementarity con- ditions in other forms, and meta-solvers that apply transformations and numeric optimization solvers to optimize MPEC problems. We illustrate the breadth of Pyomo's modeling capabil- ities for MPEC problems, and we describe how Pyomo's meta-solvers can perform local and global optimization of MPEC problems.

  16. PacifiCorp | Open Energy Information

    Open Energy Info (EERE)

    (MWH) TOT CONS 2009-03 4,513.328 40,300.371 35,420 2,957.385 28,242.692 7,794 295.18 3,403.742 1,964 7,765.893 71,946.805 45,178 2009-02 4,309.919 37,789.644 35,472 2,584.65...

  17. DOE-HDBK-1110-2008 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2008 DOE-HDBK-1110-2008 February 14, 2008 ALARA Training for Technical Support Personnel This Handbook describes a recommended implementation process for training as outlined in the DOE Radiological Control Standard (RadCon Standard). The Handbook is to assist those individuals within Department of Energy (DOE), Managing and Operating (M&O) contractors, and Managing and Integrating (M&I) contractors, identified as having responsibility for implementing the training recommended by the

  18. SF-2050.11, Patent Certification

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    050.11 OMB Control No. (2-87) 1910-0800 (Previous GC-792) Contractor Interim Certification Final Certification DOE Prime and/or Subcontract Nos. Contractor hereby certifies that: 1. All procedures for identifying and disclosing subject inventions as required by the patent clause of the con- tract have been followed throughout the reporting period. 2. There were no subcontracts or purchase orders involving research, development, and demonstration except as follows: [State none when applicable.]

  19. SGDP Report Now Available: Interoperability of Demand Response Resources

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Demonstration in NY (February 2015) | Department of Energy SGDP Report Now Available: Interoperability of Demand Response Resources Demonstration in NY (February 2015) SGDP Report Now Available: Interoperability of Demand Response Resources Demonstration in NY (February 2015) March 20, 2015 - 4:42pm Addthis The Interoperability of Demand Response Resources Demonstration in NY was awarded to Con Edison in 2009 as part of DOE's Smart Grid Demonstration Project (SGDP) grants funded by the

  20. SGDP Report: Interoperability of Demand Response Resources Demonstration in

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NY (February 2015) | Department of Energy SGDP Report: Interoperability of Demand Response Resources Demonstration in NY (February 2015) SGDP Report: Interoperability of Demand Response Resources Demonstration in NY (February 2015) The Interoperability of Demand Response Resources Demonstration in NY was awarded to Con Edison in 2009 as part of DOE's Smart Grid Demonstration Project (SGDP) grants funded by the Recovery Act. The objective of the project was to develop and demonstrate

  1. High-Tech Buildings Research and Demonstra6on Projects

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High-tech
Buildings
Research
and
 Demonstra6on
Projects 
 February
22,
2011 
 Bill
Tschudi 
 w6schudi@lbl.gov 
 laboratories
 hospitals
 Large
Energy
Footprint
 ConBnuous
OperaBon
 High
Energy
Intensity
 LiFle
Focus
on
Energy
Efficiency
 Common
Infrastructure
OpportuniBes
 Process
Energy
OpportuniBes
 * High
Process
Loads
 * UninterrupBble
Power

 * Stand-by
GeneraBon
 * HVAC
 * Chilled
water
plants
 *

  2. 585

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Department of Energy § 1005.13 of this section, a single point of con- tact is presumed to have received writ- ten notification 5 days after the date of mailing of such notification. § 1005.11 What are the Secretary's obli- gations in interstate situations? (a) The Secretary is responsible for: (1) Identifying proposed federal finan- cial assistance and direct federal devel- opment that have an impact on inter- state areas; (2) Notifying appropriate officials and entities in states which

  3. State of the States: Fuel Cells in America 2015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 6th Edition Fuel Cell Technologies Office December 2015 (This page intentionally left blank) Section title Unt utaerest in pos eum quo con et i About this Report The information contained in this report was collected from public records and websites, including North Carolina Solar Center's Database of State Incentives for Renewables & Effciency (DSIRE). Information was also gathered via direct contact with state and industry representatives as of July 31, 2015. This report is a follow-up

  4. Idaho High-Level Waste & Facilities Disposition, Final Environmental Impact Statement

    Office of Environmental Management (EM)

    COVER SHEET Responsible Agency: Lead Federal Agency: U.S. Department of Energy (DOE) Cooperating Agency: The State of Idaho Title: Contact: For additional information on this EIS and the tribal, agency and public involvement process con- ducted in conjunction with its preparation, write or call: This Final EIS is composed of a Summary, Chapters 1 through 13, and appendices. Copies of the EIS or appendices may be requested from Richard Kimmel at the address, phone number, or email address shown

  5. HYDROGEN ISOTOPE TARGETS

    DOE Patents [OSTI]

    Ashley, R.W.

    1958-08-12

    The design of targets for use in the investigation of nuclear reactions of hydrogen isotopes by bombardment with accelerated particles is described. The target con struction eomprises a backing disc of a metal selected from the group consisting of molybdenunn and tungsten, a eoating of condensed titaniunn on the dise, and a hydrogen isotope selected from the group consisting of deuterium and tritium absorbed in the coatiag. The proeess for preparing these hydrogen isotope targets is described.

  6. labnews04-29-16.qxp_la02_02-20-04

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    S andia won a three-year DOE con- tract to continue managing the US Regional Test Centers (RTCs), a network of five sites across the country where industry can assess the perfor- mance, reliability, and bankability of solar photovoltaic (PV) technologies. The program currently has more than 12 industry part- ners and 300 kilowatts of PV installed in different stages of development. "These centers are helping demonstrate that products per- form as predicted over time and in different

  7. Verdigris Valley Elec Coop Inc | Open Energy Information

    Open Energy Info (EERE)

    ) TOT SALES (MWH) TOT CONS 2009-03 3,334 39,732 29,287 620 6,280 4,308 487 5,668 607 4,441 51,680 34,202 2009-02 3,065 36,726 29,285 456 4,469 4,299 405 4,606 607 3,926...

  8. UNS Electric, Inc | Open Energy Information

    Open Energy Info (EERE)

    REV (THOUSAND ) TOT SALES (MWH) TOT CONS 2009-03 5,500 45,911 79,490 5,666 46,579 10,607 2,748 28,348 20 13,914 120,838 90,117 2009-02 6,301 52,859 79,557 5,084 42,064 10,613...

  9. Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forms and Checklists Download or view forms and checklists used at WNR. IWD Forms 2100 - Integrated Work Document (IWD) Part 1, Activity Specific Information (word version) 2100_con - Integrated Work Document (IWD) Part 1, Activity Specific Information Continuation Page (word version) 2101 - Integrated Work Document (IWD) Part 2, FOD Requirements and Approval for Entry and Area Hazards and Controls, Non-Tenant Activity Form (word version) 2102 - Integrated Work Document (IWD) Part 2, FOD

  10. Montana-Dakota Utilities Co | Open Energy Information

    Open Energy Info (EERE)

    TOT CONS 2009-03 1,134 15,419 18,636 1,164 19,883 5,080 1,252 25,660 132 3,550 60,962 23,848 2009-02 1,069 14,377 18,635 1,136 19,109 5,099 1,198 23,937 132 3,403 57,423 23,866...

  11. Otter Tail Power Co (North Dakota) | Open Energy Information

    Open Energy Info (EERE)

    ) TOT SALES (MWH) TOT CONS 2009-03 4,536 69,096 44,206 6,635 104,771 12,634 326 5,568 2 11,497 179,435 56,842 2009-02 4,919 69,170 44,146 6,370 97,635 12,601 334 6,444 2...

  12. Oil recovery by nitrogen flooding. Final report

    SciTech Connect (OSTI)

    Ronde, H.; Hagoort, J.

    1992-03-01

    The general objective of the project is the Establishment of technical and economic design criteria and evaluation tools for oil and condensate recovery by Nitrogen Injection. The main objective has been divided into the following specific objectives: Determination of the effect of oil composition on the oil recovery; Investigation of the pros and cons of slim-tube experiments as a tool for the design and evaluation of nitrogen flooding; Measurement and calculation of the minimum miscibility pressures (MMP) for nitrogen flooding.

  13. Post-reform continuation of social goals

    SciTech Connect (OSTI)

    Graniere, R.J.

    1996-01-01

    Public utility regulators are currently wrestling with the issue of how and to what extent the social goals that have grown up around traditional regulation might be continued in a restructured electric power industry. This report critically examines six mechanisms that could be used for this purpose in the wake of the introduction of competition in the generation segment. Their pros and cons are thoroughly appraised in economic terms.

  14. May 22

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 May 2010 May 31, 2010 In this issue: U.S. Articulates Commitment to Disarmament at NPT RevCon NNSA Celebrates Tenth Anniversary Sandia Director Dr. Tom Hunter Steps Down First Participant in America's Veterans to Tennessee Engineers Program Receives Degree New NNSA Website Highlights Multimedia Content, Enterprise-wide Stories NNSA Hones Nuclear Forensic Capabilities NNSA Supports National Level Exercises Pantex Plant Armed Forces Day Observance Enterprise Reengineering and Management

  15. Surprise Valley Electrification Corp. (Oregon) | Open Energy...

    Open Energy Info (EERE)

    TOT CONS 2009-03 108.007 1,617.292 1,134 21.619 300.164 336 14.159 214.616 248 143.785 2,132.072 1,718 2009-02 122.657 1,866.778 1,135 23.915 339.757 336 15.181 254.511 248 161.753...

  16. Montana-Dakota Utilities Co | Open Energy Information

    Open Energy Info (EERE)

    ) TOT SALES (MWH) TOT CONS 2009-03 1,134 15,419 18,636 1,164 19,883 5,080 1,252 25,660 132 3,550 60,962 23,848 2009-02 1,069 14,377 18,635 1,136 19,109 5,099 1,198 23,937 132...

  17. : Frsnk K. Pittman, Director, Division of Waste Management

    Office of Legacy Management (LM)

    . _J NOV 13 1973 , : Frsnk K. Pittman, Director, Division of Waste Management snd. Transportation, HQ DECONTAMINAl!ING AND DECOWSSIONING OF AEC FACILITIES (YOUR TWX, a/29/73 1 SR has only one facility which has been decontaminated and decommissioned for unconditional release. The Sylvsnia- Corning Plant at Hicksville, Long Island, New York, was released in 1965 tG the Sylvania Corp. Cleanup was accomplished by steaming and washing the con- tsminated sectionof buildings 1 & 2, bringing

  18. Optimisation of NSLS-II Blade X-ray Beam Position Monitors: from Photoemission type to Diamond Detector

    SciTech Connect (OSTI)

    ILINSKI P.

    2012-07-10

    Optimisation of blade type x-ray beam position monitors (XBPM) was performed for NSLS-II undulator IVU20. Blade material, con and #64257;guration and operation principle was analysed in order to improve XBPM performance. Optimisation is based on calculation of the XBPM signal spatial distribution. Along with standard photoemission type XBPM a Diamond Detector Blades (DDB) were analysed as blades for XBPMs. DDB XBPMs can help to overcome drawbacks of the photoemission blade XBPMs.

  19. Building Energy Rating and Disclosure Policies | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Sacramento, California | Department of Energy Treasure Homes, who worked with SMUD, DOE, NREL, and ConSol to build HERS-54 homes with high-efficiency HVAC, ducts buried in attic insulation, SmartVent cooling, and rooftop PV. PDF icon Treasure Homes: Fallen Leaf at Riverbend - Sacramento, CA More Documents & Publications Building America Whole-House Solutions for New Homes: Grupe, Rocklin, California Vol. 9: Building America Best Practices Series - Builders Challenge Guide to 40%

  20. Frontiers In Science public lectures: Harvesting energy from air

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    INVESTMENT IN COMMODITIES MARKETS: POTENTIAL IMPACT ON COMMODITY PRICES & VOLATILITY IIF Commodities Task Force Submission to the G20 September 2011 IIF Commodities Task Force Submission to the G20 Financial Investment in Commodity Markets: Potential Impact on Commodity Prices & Volatility 1 Preface Amidst increasing concerns about global growth prospects and financial market volatility, commodity prices con- tinue to be a focus for policymakers. The French G-20 presidency has made this

  1. Stockbridge-Munsee Health & Wellness Center and Family Center Renewable Energy Feasibility Study

    Office of Environmental Management (EM)

    Stockbridge-Munsee Health & Wellness Center & Family Center Renewable Energy Feasibility Study. Stockbridge-Munsee Tribal Overview * A Band of Mohican Indians * From the Algonquin language group of Tribes. Papscanee Village Site Painting follows archeological reports & accurately depicts pre European village. Tribal History * The tribe lived along the Muh-he-con-ne-ok River, "where the waters are never still". (now the Hudson River) * The Stockbridge name came from the town

  2. THE LOSS OF ACCURACY OF STOCHASTIC COLLOCATION METHOD IN SOLVING NONLINEAR

    Office of Scientific and Technical Information (OSTI)

    DIFFERENTIAL EQUATIONS WITH RANDOM INPUT DATA (Journal Article) | SciTech Connect Journal Article: THE LOSS OF ACCURACY OF STOCHASTIC COLLOCATION METHOD IN SOLVING NONLINEAR DIFFERENTIAL EQUATIONS WITH RANDOM INPUT DATA Citation Details In-Document Search Title: THE LOSS OF ACCURACY OF STOCHASTIC COLLOCATION METHOD IN SOLVING NONLINEAR DIFFERENTIAL EQUATIONS WITH RANDOM INPUT DATA n this paper we show how stochastic collocation method (SCM) could fail to con- verge for nonlinear differential

  3. A Run-Time Verification Framework for Smart Grid Applications Implemented on Simulation Frameworks

    SciTech Connect (OSTI)

    Ciraci, Selim; Sozer, Hasan; Tekinerdogan, Bedir

    2013-05-18

    Smart grid applications are implemented and tested with simulation frameworks as the developers usually do not have access to large sensor networks to be used as a test bed. The developers are forced to map the implementation onto these frameworks which results in a deviation between the architecture and the code. On its turn this deviation makes it hard to verify behavioral constraints that are de- scribed at the architectural level. We have developed the ConArch toolset to support the automated verification of architecture-level behavioral constraints. A key feature of ConArch is programmable mapping for architecture to the implementation. Here, developers implement queries to identify the points in the target program that correspond to architectural interactions. ConArch generates run- time observers that monitor the flow of execution between these points and verifies whether this flow conforms to the behavioral constraints. We illustrate how the programmable mappings can be exploited for verifying behavioral constraints of a smart grid appli- cation that is implemented with two simulation frameworks.

  4. Human Factors Aspects of Operating Small Reactors

    SciTech Connect (OSTI)

    OHara, J.M.; Higgins, J.; Deem, R.; Xing, J.; DAgostino, A.

    2010-11-07

    The nuclear-power community has reached the stage of proposing advanced reactor designs to support power generation for decades to come. They are considering small modular reactors (SMRs) as one approach to meet these energy needs. While the power output of individual reactor modules is relatively small, they can be grouped to produce reactor sites with different outputs. Also, they can be designed to generate hydrogen, or to process heat. Many characteristics of SMRs are quite different from those of current plants, and so may require a concept of operations (ConOps) that also is different. The U.S. Nuclear Regulatory Commission (NRC) has begun examining the human factors engineering- (HFE) and ConOps- aspects of SMRs; if needed, they will formulate guidance to support SMR licensing reviews. We developed a ConOps model, consisting of the following dimensions: Plant mission; roles and responsibilities of all agents; staffing, qualifications, and training; management of normal operations; management of off-normal conditions and emergencies; and, management of maintenance and modifications. We are reviewing information on SMR design to obtain data about each of these dimensions, and have identified several preliminary issues. In addition, we are obtaining operations-related information from other types of multi-module systems, such as refineries, to identify lessons learned from their experience. Here, we describe the project's methodology and our preliminary findings.

  5. Quantitative and qualitative measures of decomposition: Is there a link?

    SciTech Connect (OSTI)

    Eaton, Robert, J.; Sanchez, Felipe, G.

    2009-03-01

    Decomposition rates of loblolly pine coarse woody debris (CWD) were determined by mass loss and wood density changes for trees that differed in source of mortality (natural, girdle-poison, and felling). Specifically, three treatments were examined: (1) control (CON): natural mortality; (2) CD: 5-fold increase in CWD compared with the CON; and (3) CS: 12-fold increase in snags compared with the CON. The additional CWD in the CD treatment plots and the additional snags in the CS plots were achieved by felling (for the CD plots) or girdling followed by herbicide injection (for the CS plots) select trees in these plots. Consequently,mortality on the CD plots is due to natural causes and felling. Likewise, mortality on the CS plots is due to natural causes and girdle-poison. In each treatment plot, mortality due to natural causes was inventoried since 1997, whereas mortality due to girdle-poison and felling were inventoried since 2001. No significant difference was detected between the rates of decomposition for the CWD on these treatment plots, indicating that source of the tree mortality did not influence rates of decomposition once the tree fell. These experimental measures of decomposition were compared with two decay classification systems (three- and five-unit classifications) to determine linkages. Changes in wood density did not correlate to any decay classification, whereas mass loss had a weak correlation with decay class. However, the large degree of variation limits the utility of decay classification systems in estimating mass loss.

  6. Salvianolic acid A preconditioning confers protection against concanavalin A-induced liver injury through SIRT1-mediated repression of p66shc in mice

    SciTech Connect (OSTI)

    Xu, Xiaomei; Hu, Yan; Zhai, Xiaohan; Lin, Musen [Department of Pharmacology, Dalian Medical University, Dalian 116044 (China); Chen, Zhao; Tian, Xiaofeng; Zhang, Feng [Department of General Surgery, Second Affiliated Hospital of Dalian Medical University, Dalian 116023 (China); Gao, Dongyan; Ma, Xiaochi [Department of Pharmacology, Dalian Medical University, Dalian 116044 (China); Lv, Li, E-mail: lv_li@126.com [Department of Pharmacology, Dalian Medical University, Dalian 116044 (China); Yao, Jihong, E-mail: Yaojihong65@hotmail.com [Department of Pharmacology, Dalian Medical University, Dalian 116044 (China)

    2013-11-15

    Salvianolic acid A (SalA) is a phenolic carboxylic acid derivative extracted from Salvia miltiorrhiza. It has many biological and pharmaceutical activities. The purpose of this study was to investigate the effect of SalA on concanavalin A (ConA)-induced acute hepatic injury in Kunming mice and to explore the role of SIRT1 in such an effect. The results showed that in vivo pretreatment with SalA significantly reduced ConA-induced elevation in serum alanine aminotransferase (ALT) and aspartate aminotransferase (AST) activities and decreased levels of the hepatotoxic cytokines such as interferon-gamma (IFN-?) and tumor necrosis factor-alpha (TNF-?). Moreover, the SalA pretreatment ameliorated the increases in NF-?B and in cleaved caspase-3 caused by ConA exposure. Whereas, the pretreatment completely reversed expression of the B-cell lymphoma-extra large (Bcl-xL). More importantly, the SalA pretreatment significantly increased the expression of SIRT1, a NAD{sup +}-dependent deacetylase, which was known to attenuate acute hypoxia damage and metabolic liver diseases. In our study, the increase in SIRT1 was closely associated with down-regulation of the p66 isoform (p66shc) of growth factor adapter Shc at both protein and mRNA levels. In HepG2 cell culture, SalA pretreatment increased SIRT1 expression in a time and dose-dependent manner and such an increase was abrogated by siRNA knockdown of SIRT1. Additionally, inhibition of SIRT1 significantly reversed the decreased expression of p66shc, and attenuated SalA-induced p66shc down-regulation. Collectively, the present study indicated that SalA may be a potent activator of SIRT and that SalA can alleviate ConA-induced hepatitis through SIRT1-mediated repression of the p66shc pathway. - Highlights: We report for the first time that SalA protects against ConA-induced hepatitis. We find that SalA is a potential activator of SIRT1. SalA's protection against hepatitis involves SIRT1-mediated repression of p66shc.

  7. User Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Edison and Cori: User Update - 1 - Zhengji Zhao, Helen He, Wahid Bhimji NERSC User Group Meeting Berkeley, CA, March 24, 2016 Edison Update - 2 - Zhengji Zhao Edison upgrades (11/30/2015-3/15) * Edison move 11/30-12/23/2015 - Edison disassembled, reassembled, integrated, reconfigured and tested at CRT - 1/4/2016 users were enabled - Free charging period 1/4 - 1/10/2016 * Switch to Slurm - Slurm configuraDon has been in conDnuous improvement and adjustment - Users needed a lot of help with

  8. X

    National Nuclear Security Administration (NNSA)

    6A NAME AND TITLE OF CON CTING OFFICER (Type or print) 11 CONTRACT 10 CODE IPAGE OF PAGES AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1 I 2 2 AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 15. PROJECT NO. (If applicable) 219 See Block 16C a.ISSUED BY CODE 05007 7. ADMINISTERED BY (If other than Item 6) CODE 105007 NNSA/Pantex Site Office NNSA/Pantex Site Office U.S. Department of Energy U.S. Department of Energy NNSA/Pantex Site Office NNSA/Pantex Site

  9. Conocimiento de Energía: Principios Esenciales y Conceptos Fundamentales para la Educación de Energía

    SciTech Connect (OSTI)

    2014-06-01

    This is the Spanish version of our Energy Literacy guidebook. Esta guía presenta conceptos de energía que, cuando se entienden y se aplican, ayudan a individuos y a comunidades a tomar decisiones sobre la energía con conocimiento de causa. No es un currículo sino que ofrece un marco sobre el cual puede basarse un plan de estudios. La guía se dirige a cualquier persona que participe en la educación de energía.

  10. J

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    J ames S iegrist, A ssociate D irector, Office o f H igh E nergy P hysics Office o f S cience, U .S. D epartment o f E nergy NERSC HEP Requirements Planning Review November 27 th , 2012 PerspecJves f rom H igh E nergy P hysics OFFICE O F SCIENCE 1 I s t o u nderstand * How the universe works at its most fundamental level, * By discovering the elementary consJtuents of maPer & energy, * Probing t he i nteracJons b etween t hem, a nd * exploring the basic nature of space and Jme. This q uest

  11. J:\ARM_19~1\P367-376.WPD

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    r e ) CO 2 H 2 O O 3 m 3 m 3 (r e ) µm µm (r e ) (R N ) (r e ) (r e ) m 2 m 2 R N Session Papers 373 Clouds and Snowmelt on the North Slope of Alaska T. Zhang, K. Stamnes, and S.-A. Bowling Geophysical Institute University of Alaska Fairbanks Fairbanks, Alaska Introduction Clouds have a large effect on the radiation field. Con- sequently, possible changes in cloud properties may have a very substantial impact on climate. Of all natural surfaces, seasonal snow cover has the highest surface

  12. High Performance House Showcased at Builders Show - News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High Performance House Showcased at Builders Show January 20, 2004 Golden, Colo. - Homebuilders attending the 2004 International Builders' Show in Las Vegas can tour a new kind of home-a highly energy-efficient Zero Energy Home that will produce as much electricity as it uses over the course of a year. The U.S. Department of Energy (DOE) and its National Renewable Energy Laboratory (NREL) partnered with Pardee Homes and energy consultant ConSol to introduce the Zero Energy Home concept with this

  13. I

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a I ' i . t I . - I This report has been photostated to fill your request as our sup- I ~ASSIFICATIO~ CANCELLED * ply of copies was exhausted. If you should find that you do not need t o retain this copy permanently in your files, we would greatly appreciate your returning it t o T I S so that it may be used to fill future requests from other AEC installations. I DATE - ---- ?Y-&!=-ql- _ _ ____ .-..._. iB Thin document con dclenae of the or the revelati 81 ltnd 82; It.; trnE DISCLAIMER This

  14. Los lideres de energia en EEUU toman medidas para desarrollar la Alianza de

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energia y Clima de las Americas | Department of Energy lideres de energia en EEUU toman medidas para desarrollar la Alianza de Energia y Clima de las Americas Los lideres de energia en EEUU toman medidas para desarrollar la Alianza de Energia y Clima de las Americas June 16, 2009 - 12:00am Addthis In English LIMA, PERÚ - Ministros de energía y otros líderes de energía de gobiernos de a través de las Américas se reunieron con corporaciones de energía y otros expertos en Lima, el 15 y

  15. LBL--29472 DE91

    Office of Scientific and Technical Information (OSTI)

    29472 DE91 004112 m RFQ's- AN INTRODUCTION I John W. Staples Lawrence Berkeley Laboratory University of California Berkeley, California 94720 September 1990 This work supported by the Director, Office 11 of Energy Research, Office of High Energy and Nuclear Physics, Nuclear Science Divi- sion, U. S. Department of Energy under con- tract number DE-AC03-76SF00098. LBI,-29472 RFQs An Introduction * _ _ John W. Staples b 'La u,Tr77ceBerkeley Laboratory, University of Califor77ia, Berkeley, CA 9.4720

  16. PROGRAMA DE IGUALDAD DE ACCESO PARA PUERTO RICO: Recursos de Información del VIH/SIDA de la National Library of Medicine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Para buscar una publicación, use Journals Database (una base de datos de publicaciones)--y le permitirá buscar por el tema, título/abreviación de la publicación, el número ISSN, o buscar usando términos del tema  Para formar una estrategia con términos de MeSH, use la base de datos MeSH Database- -el vocabulario Medical Subject Heading (MeSH) es controlado por la NLM y proporciona una forma consistente de recuperar información que por lo contrario pueden tener diferentes términos

  17. Eia.gov BETA - Data - U.S. Energy Information Administration (EIA)

    U.S. Energy Information Administration (EIA) Indexed Site

    Referencia cruzada de definición English FranÇais Español A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Explorar los términos relacionados con las siguientes categorías: petróleo crudo y equivalentes líquidos del gas natural aditivos y oxigenantes productos del petróleo gas natural biocombustibles electricidad Ver índice de todos los términos

  18. ch_4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    71 DOE/EIS-0287 Idaho HLW & FD EIS university research programs and private con- tractors. Ongoing studies by the Centers for Disease Control and Prevention, an agency of the U.S. Department of Health and Human Services, also carefully tracks possible health effects from past activities at INEEL. 4.11.1.1 Radiological Health Risk Very low doses of radiation are not known to cause health effects in humans; however, extrapolation of the dose-response relationship from high doses indicates that

  19. eodd0d4.tmp

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ,. .,', , !, , '! " ,, /1' ., 1 ., ,' , I ,, ,' I ,. ,, ', ,' 1, 'I, ,, ,' ~s documcot was pmpmed ss an abcmmt of wofi" spomssr&Iby the Uni&l''Statcs ", ,,, , ' G@nrwnL Whik this doourncntis Imlkved to con+n Wrect information, rreithq' ,, 'the United States, Governnknt nor aoy agency thereof, ~or The Regents of tbe ' , ~,, ), 's \ I Un@ersity of California not any of their.pnrploycc.$. * ~)' warranty,qress Ot . . impfkd, or assumes any fc~l responsibility, for @rcaccuracy,

  20. Conocimiento de Energia | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conocimiento de Energia Conocimiento de Energia Conocimiento de Energia Conocimiento de Energía: Principios Esenciales y Conceptos Fundamentales para la Educación de Energía presenta conceptos de energía que, cuando se entienden y se aplican, ayudan a individuos y a comunidades a tomar decisiones sobre la energía con conocimiento de causa. Descargue una copia gratis de Conocimiento de Energía (en la parte inferior de esta página) o escríbanos a energyliteracy@ee.doe.gov para obtener

  1. O

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . 0 / O T - t2>0^ H O - CHEMICAL AND PHYSICAL CHARACTERIZATION OF THE ACTIVATION OF RIBULOSEBISPHOSPHATE CARBOXYLASE/OXYGENASE MARK I. DONNELLY, V. RAMAKRISHNAN, AND FRED C, HARTMAN INTRODUCTION COnF-8308110- DE83 017226 Ribulosebisphosphate carboxylase/oxygenase requires CO2 and Mg^"*" for activation; CO2 reacts with a protein e-amino group to form a carbamate which is stabilized by binding of Mg2+. In the case of the hexadecameric enzyme from spinach, the site of carbamate

  2. The Oak Ridge Competitive Electricity Dispatch (ORCED) Model

    SciTech Connect (OSTI)

    Hadley, Stanton W

    2008-06-01

    The Oak Ridge Competitive electricity Dispatch (ORCED) model has been used for multiple analyses of the impacts of different technologies and policies on the electricity grid. The model was developed over ten years ago and has been greatly enhanced since the initial documentation from June 1998 (ORNL/CON-464). The report gives guidance on the workflow and methodologies used, but does not provide a complete user's manual detailing steps necessary to operate the model. It lists the major resources used, shows the main inputs and outputs of the model, and describes how it can be used for a variety of analyses.

  3. METALS~~~SINTEG~~~~TING~COMPANY, INC.

    Office of Legacy Management (LM)

    METALS~~~SINTEG~~~~TING~COMPANY, INC. April 5, 1946 War Department Manhattan &glneer District P. 0. Box #33S Church Street Annex New York 8, New Pork Attention: Major W illiam C. Camobell Re: Supplemental Agreement Modification # 12, Con- tract No. W-7405-enq 139 Gentlemen: We are returning herewith, Supplemental Agree- ~~ya*~t~,",":' "~Fc:s2~~r1~~r~~~~~ng, that on receipt of the signed agreement herein, the Contracting Officer will affix his signature and no further approval

  4. PPaAJ~f~-"'

    Office of Legacy Management (LM)

    - PgOPO6bt OF MURD . COls'iRACT AT(lI&1)-140~ FIlli ml3 (31EXIUL CON6'E'JCTICB :i:, cbp, ., ,,. ._. SBMOL: "' PPaAJ~f~-"' :: "' ~ .' ., .~ : c !. .: ..:.. ..~ : ,. r. :;: A?TiL.C?@!, " ' If. D&do& . . . . . .' .' :: ,,,, A&g.?% Tigs mwonodum raquosts mat a cmtnot with (ho chwloal Cmetructlm Cerp.. bo jinqmrod la aw~danao with inforwtla hemlaaf4.r se4 fstb. Ski? mebere&dw proadsa a empfste reaord oizthe aego4Aa4lws leadia~ $e'the'prop~d OcDtrrrot and alro

  5. NSTec Goes Paperless Safer Ports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Goes Paperless Safer Ports iCon initiative helping to automate NSTec processes. Once again NvE partners stepped up to deliver for the holidays. RSL hosts international customs training in So. Nevada. See page 7. See page 7. Excess Property Effort Hailed as a Success for All in NNSA to Follow An initiative to recycle and remove unused equipment and materials at the Nevada National Security Site (NNSS) has not only contributed millions to the NNSS mission, officials from the U.S. Department of

  6. GLADY CASSIT Y VANDALIA MURPHY CR EEK BU CKHN-CENT URY CLAY

    U.S. Energy Information Administration (EIA) Indexed Site

    GLADY CASSIT Y VANDALIA MURPHY CR EEK BU CKHN-CENT URY CLAY GLENVILLE N MINNORA JARVISVILLE FAR MINGTON PH ILIPPI BELIN GT ON WAYN ESBUR G PR UNT Y GLENVILLE S CAVE RUN TAYLOR DRAIN ROSEDALE ST MPT-N RMNT-SHK WESTON-JAN E LEW SWN DL-WID EN VADIS STANL EY DEKALB UNION TALLM AN SVILL E ASPINALL-FIN ST ER ZOLLARSVILLE WILBU R RAMSEY HEATER S BR IDGEPORT-PRUNT YTOWN ALEXAND ER LILLY FORK SH ERMAN HIRAM ST FK-BLST N CK BU RNS CH APEL S BR WN -LUM BER PORT CON INGS PR ATT BOSWELL REVEL ELK C REEK

  7. LAKESHORE AVON BR ANT-EDEN ALD EN-LANC ASTER AU BURN W SH ELDON

    U.S. Energy Information Administration (EIA) Indexed Site

    81 § ¨ ¦ 81 LAKESHORE AVON BR ANT-EDEN ALD EN-LANC ASTER AU BURN W SH ELDON CALEDONIA HURON C REEK LEIC EST ER COL DEN ASH FORD INDIAN FALLS LAWTONS SAR DINIA RPD-037 -2 GLENWOOD PU LASKI PAVILION CON CORD COL LINS N ELM A ORC HARD PARK-H AMBU RG DANLEY CORNERS ST ILLWAT ER CHAFF EE-ARCAD E FAYETT E-WATERLOO LAKEVIEW JAVA SEN EC A W ELLER Y AU RORA E ZOAR BU FFALO TIOGA SILVER LAKE AKR ON ROM E RAT HBON E ALM A BET HANY WYOMING ULYSSES BR ANCH W SAN DY CREEK COL LINS BLOOMFIELD E LEBANON

  8. Distributed Solar Photovoltaics for Electric Vehicle Charging: Regulatory and Policy Considerations (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-09-01

    Increasing demand for electric vehicle (EV) charging provides an opportunity for market expansion of distributed solar technology. A major barrier to the current deployment of solar technology for EV charging is a lack of clear information for policy makers, utilities and potential adopters. This paper introduces the pros and cons of EV charging during the day versus at night, summarizes the benefits and grid implications of combining solar and EV charging technologies, and offers some regulatory and policy options available to policy makers and regulators wanting to incentivize solar EV charging.

  9. New Brunswick Laboratory Jobs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department of Energy Bedford Builds Foundation for Energy-Centric Economic Development New Bedford Builds Foundation for Energy-Centric Economic Development August 25, 2014 - 2:51pm Addthis Pictured here is one of the solar arrays that is providing New Bedford with clean, renewable energy to power its municipally owned buildings. This ground-mounted solar array is built on a brownfield site. | Photo courtesy of Con Edison Solutions. Pictured here is one of the solar arrays that is providing

  10. A. Paul Alivisatos and Harry Atwater

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Paul Alivisatos and Harry Atwater University of California, Berkeley and Caltech Photovoltaic performance of ultra-small PbSe quantum dots Achievement: We developed a synthesis for ultra-small, strongly con ned PbSe nanocrystals 1-3nm in diameter, allowing absorption to be tuned across the entire visible spectrum. A larger bandgap in smaller particles leads to higher open-circuit voltages (~0.6V) and increased overall efficiency (~3.5%) compared to previously reported photovoltaic devices of

  11. Microsoft Word - ViArray_Fact_ Sheet_SAND2011-3935P_updated_format.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ViA Tru Sandia N radiation ASICs e Pre-qual Manufac fabric-lik Specia  M  F s  U s  O Applica  C  I  S  O  R  H Sandia N high-con design a high-mix capabilit high-reli Array sted National Lab n-hardened, enable rapid lified base ar cturing Sour ke structure l Features Metal-via co Four Power- supplies for p Unused trans static current On-package ations incl Command & Instrumentat Sensor Moni Obsolescent Rad-hard env High-Reliabi National Lab nsequence ap and

  12. Nitroxylcob(III)Alamin: Synthesis And X-Ray Structural Characterization

    SciTech Connect (OSTI)

    Hannibal, L.; Smith, C.A.; Jacobsen, D.W.; Brasch, N.E.

    2009-06-01

    The long-elusive crystal structure of nitrosylcobalamin (NOCbl) reveals that the Co-N-O angle is 117.4-121.4{sup o}; hence, NOCbl is best described as nitroxylcob(III)alamin in the solid state (see picture: Co purple, N blue, O red, P orange, C gray, H white). The length of the Co-N bond trans to the NO ligand is typical of those seen when strong {beta}-axial ligands are positioned trans to the 5,6-dimethylbenzimidazole group.

  13. New Bedford Builds Foundation for Energy-Centric Economic Development |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Bedford Builds Foundation for Energy-Centric Economic Development New Bedford Builds Foundation for Energy-Centric Economic Development August 25, 2014 - 2:51pm Addthis Pictured here is one of the solar arrays that is providing New Bedford with clean, renewable energy to power its municipally owned buildings. This ground-mounted solar array is built on a brownfield site. | Photo courtesy of Con Edison Solutions. Pictured here is one of the solar arrays that is providing

  14. DOE-HDBK-1145-2001 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5-2001 DOE-HDBK-1145-2001 August 21, 2001 Radiological Safety Training for Plutonium Facilities Replaced by DOE-HDBK-1145-2001 This program management guide describes the proper implementation standard for core training as outlined in the DOE Radiological Control (RadCon) Standard. PDF icon DOE-HDBK-1145-2001, Radiological Safety Training for Plutonium Facilities More Documents & Publications Technical Standards, DOE-HDBK-1145-2013 - May 7, 2013 DOE-HDBK-1145-2013 DOE-HDBK-1145

  15. DOE-HDBK-1145-2008 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8 DOE-HDBK-1145-2008 August 20, 2008 Radiological Safety Training for Plutonium Facilities Replaced by DOE-HDBK-1145-2013 This program management guide describes the proper implementation standard for core training as outlined in the DOE Radiological Control (RadCon) Standard. PDF icon DOE-HDBK-1145-2008, Radiological Safety Training for Plutonium Facilities More Documents & Publications Technical Standards, DOE-HDBK-1145-2013 - May 7, 2013 DOE-HDBK-1145-2013 DOE-HDBK-1145-2001

  16. A PUBLICATION FOR ALL MEMBERS OF THE NNSA/NV FAMILY Contents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 January 2004 Accomplishments for 2003 The year 2003 was a busy and productive year for the members of the National Nuclear Security Administration Nevada Site Office (NNSA/NSO) complex. Major accomplish- ments and milestones were achieved in the year. In support of its mission, NNSA/NSO, the national laboratories, contractors, and sub- contractors share their major accomplishments for 2003. NNSA/NSO The year 2003 for the Nevada Site Office was not only a year of change, but a year of con-

  17. EV-13

    Office of Legacy Management (LM)

    ?a/71 2.z=' 1. lg EV-13 Notification of Xced for So!?e Form of Reoedial Action, in Ikyo Ca~;~op., Los Alanos, New Mexico s. lkycrs, HEI-90 4 EV/IXT has dctcrnincd that portions of Szyo Ca~yor? aztr contapAnat& vith radioactive residue as a result of activities conducteiI for the ku!hsttzi F r- sider this -n...lnecr I?istrict and ntornic Lncrg Cocaissio2. vc con- site to be low priority as potential e!xp,osw'c rates to the general putilic are relatively low under the p&en: Enclosed in

  18. Historical Information H.2 Biological Studies

    Office of Legacy Management (LM)

    Ad Hoc Rulison Review Panel Comments Regarding Re-Entry, Gas Reservoir Testing and Flaring, November 21, 1969 This page intentionally left blank November 21, 1969 1-lr. Robert E. Miller, Manager Nevada Operations Office , U.. S, Atomic Energy Commission Post Office Box 14100 Las Vegas, Nevada 89114 Dear M r . Miller: Members of t h e Ad Hoc Rulison Review Panel m e t on 20 and 2 1 November, 1969, a t t h e AEC1s San Francisco Operations Office t o review data con- cerning ~ r e d i c t i o n s

  19. *

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC-8/Cori will at least double NERSC capacity in CY17 and triple capacity in CY18, in addi>on to Early Use >me in FY17. * Con>nued support from DOE, Administra>on, and Congress due to the Accomplishments of NERSC users and staff; e.g., requested $76 million for FY16, Congress provided $86 million and mandate to start power/cooling upgrade (for NERSC-9). * FY17 Request: $92 million; i.e., $4 million more than infla>on. * NERSC-9 draV Request For Proposals specifies Delivery in

  20. 2010sr16.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Recovery Act Funds Put Aiken Technical College Rad Con Graduates to Work Early Aiken, S.C. - Using $200,000 in American Recovery and Reinvestment Act funds from the U.S. Department of Energy's Savannah River Site (SRS), the Aiken Technical College's (ATC) Radiation Protection Technology Program will be able to catapult 16 graduates into the local work force nearly six months ahead of schedule. "The program's first graduates are a success story that has come to life in a short period of

  1. Radiation Control in Tank farms discussion with HAB

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Control in Tank Farms discussion with HAB Health, Safety, Environment Protection Brandon Williams February 14, 2012 Timeline * 2-23-10, ORP initiated an assessment of WRPS Rad Program * 6-9-10, ORP issues RadCon assessment report. - 1 Concern, 3 Level 1 findings, 12 level 2 findings * 11-5-10, WRPS submits a CAP, which ORP approved. - Based on Root causes - An end point/effectiveness review was required * 5-27-11, DOE Office of Enforcement issues a Consent Order based upon ORP identified

  2. Management Overview

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SAND2014-18436 PE Current DOE Used Fuel Disposition Storage and Transportation R&D Activities Sylvia Saltzstein, Sandia National Labs BAM and SNL Collaboration Workshop October 6-9, 2014, Albuquerque, NM, USA Scenario Difficulty  Cons eque nce  Contents Overall Storage and Transportation R&D Objectives  DOE High Burnup Dry Storage Cask R&D Project  Status of High Burn-up related R&D work in technical Control Accounts  Field Demonstration  Experiments 

  3. Los Alamos National Laboratory * Est. 1943 The Pulse-Newsletter of the Los Alamos Neutron Science Center and Accelerator Operations and Technology Division

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Los Alamos National Laboratory * Est. 1943 The Pulse-Newsletter of the Los Alamos Neutron Science Center and Accelerator Operations and Technology Division I N S I D E 2 From Alex's Desk 3 lujAn Center reseArCh FeAtureD on Cover oF Langmuir 4 FunCtionAl oxiDes unDer extreme ConDi- tions-quest For new mAteriAls 6 heADs uP! By Diana Del Mauro ADEPS Communications Inside the Lujan Neutron Scattering Center, Victor Fanelli is busy preparing a superconducting magnet. In a series of delicate steps,

  4. HANFORD ENGINEER WORKS

    Office of Legacy Management (LM)

    HANFORD ENGINEER WORKS IJd *P-t - - ~~~ssiticatiC+n cwcetted rat G.E. NUCLEONICS PROJECT xi I ~@L.%&~--G-ENERAI,@ ELECTRIC z ,m ._.__.-. _ I--..-. By Authority of. COMPANY ._ Atmic Energy Commission Office of Hanford Dire&xl Operations Riohland, Washington Attention; Mr. Carleton Shugg, Manager ./ ALPKA-ROLLED EL'GIL%I jw -879 ' . *_ a. f' Richland, Washington February 6, 1948 , Thla Dclc.Jv-<en! :-; . ' - -*...-- f_ ~~~.s No .__. ._. .s / ~. - J-LccIp%. Fr:*? fi This will con&rm

  5. Concept of operations for channel characterization and simulation of coaxial transmission channels at the National Ignition Facility (NIF)

    SciTech Connect (OSTI)

    Brown, Jr., Charles G.

    2015-03-23

    The National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL) executes experiments for inertial con nement fusion (ICF), world-class high energy density physics (HEDP), and critical national security missions. While the laser systems, target positioners, alignment systems, control systems, etc. enable the execution of such experiments, NIF’s utility would be greatly reduced without its suite of diagnostics. It would be e ectively “blind” to the incredible physics unleashed in its target chamber. Since NIF diagnostics are such an important part of its mission, the quality and reliability of the diagnostics, and of the data recorded from them, is crucial.

  6. Coupling radiative heat transfer in participating media with other heat transfer modes

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Tencer, John; Howell, John R.

    2015-09-28

    The common methods for finding the local radiative flux divergence in participating media through solution of the radiative transfer equation are outlined. The pros and cons of each method are discussed in terms of their speed, ability to handle spectral properties and scattering phenomena, as well as their accuracy in different ranges of media transport properties. The suitability of each method for inclusion in the energy equation to efficiently solve multi-mode thermal transfer problems is discussed. Lastly, remaining topics needing research are outlined.

  7. GLOBAL CLIMATE CHANGE: SOME IMPLICATIONS, OPPORTUNITIES. AND CHALLENGES FOR U.S. FORESTRY

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GLADY CASSIT Y VANDALIA MURPHY CR EEK BU CKHN-CENT URY CLAY GLENVILLE N MINNORA JARVISVILLE FAR MINGTON PH ILIPPI BELIN GT ON WAYN ESBUR G PR UNT Y GLENVILLE S CAVE RUN TAYLOR DRAIN ROSEDALE ST MPT-N RMNT-SHK WESTON-JAN E LEW SWN DL-WID EN VADIS STANL EY DEKALB UNION TALLM AN SVILL E ASPINALL-FIN ST ER ZOLLARSVILLE WILBU R RAMSEY HEATER S BR IDGEPORT-PRUNT YTOWN ALEXAND ER LILLY FORK SH ERMAN HIRAM ST FK-BLST N CK BU RNS CH APEL S BR WN -LUM BER PORT CON INGS PR ATT BOSWELL REVEL ELK C REEK

  8. HEP-v2-for-dist

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Case S tudy: C on.nuing S tudies o f P lasma B ased Accelerators ( mp113) * PI: W. B. Mori (UCLA) * Presenter: F. S. Tsung (UCLA) Users: W. An, A. Davidson, V. K. Decyk, (UCLA), J. Vieira, L. Silva (IST), W. Lu (UCLA/ Tsinghua) F. S. Tsung, HEP Workshop HEP R equirements: Con.nuing S tudies o f P lasma B ased A ccelerators ( mp113) (PI: W . B . M ori, P resenter: F . S . T sung) An alternate scheme to accelerate particles using plasmas is the Plasma WakeField Accelerator (PWFA) concept where a

  9. Untitled

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nan Li MPA-CINT: Materials Physics & ApplicaCons Division - Center for Integrated Nanotechnologies Los Alamos NaConal Laboratory Achieving High Mechanical Deformability in Piezoelectric AlN Nanocomposites Monday, May 9, 2016 2:00 to 3:00pm MSL Auditorium (TA-03 - Bldg 1698 - Room A103) Abstract: Piezoelectric ceramic films (such as AlN) have a wide range of applica;ons in microelectronics. Under electric fields or mechanical strains, these materials can achieve energy conversion between

  10. Recovery Act Workers Complete Environmental Cleanup of Coal Ash Basin

    Office of Environmental Management (EM)

    Site (SRS) recently cleaned up a 17- acre basin containing coal ash residues from Cold War operations. The American Recovery and Reinvestment Act project was safely completed at a cost of $8.9 million, $2.9 million under budget. The manmade earthen basin received ash from the former R Area Pow- erhouse operations, which ended in 1964. The first of five reactors con- structed at SRS, the R Reactor produced nuclear materials for national defense. Recovery Act funding allowed SRS to accelerate

  11. Scientific Achievement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    xperimentally o bserved r obust p iezoelectricity in s uspended s ingle m olecular l ayer o f M oS 2 i n atmosphere, the first discovery of such direct conversion b etween e lectricity a nd m echanical stress in free---standing 2D materials. Significance and Impact It p romises n ew a pplicaCons i n n ano---generators a nd low---power l ogic s witches f or c ompuCng s caled down t o a s ingle a tomic u nit c ell. Research Details - Fabricated e lectro---mechanical d evices w ith f ree---

  12. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    mbbl_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_cons_psup_dc_nus_mbbl_m.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov" ,,"(202) 586-8800",,,"4/27/2016 9:01:02 PM" "Back to Contents","Data 1: U.S. Product Supplied for Crude Oil and Petroleum Products"

  13. Assistant Secretary Hoffman Discusses Grid Modernization with the New York Times and E&E TV

    Broader source: Energy.gov [DOE]

    During a New York Times conference on “Energy for Tomorrow: Building Sustainable Cities,” Assistant Secretary Hoffman joined ConEd CEO Kevin Burke, and Euroheat and Power CEO Sabine Froning for a discussion on “Think National but Power Local.” During an interview with E&E TV’s Monica Trauzzi, she discussed how Recovery Act funding is helping utilities achieve important results such as reducing peak load, deferring building of additional generation, improving operations and monitoring the health of the grid more effectively.

  14. Safeguards Guidance for Prismatic Fueled High Temperature Gas Reactors (HTGR)

    National Nuclear Security Administration (NNSA)

    5) August 2012 Guidance for High Temperature Gas Reactors (HTGRs) with Prismatic Fuel INL/CON-12-26130 Revision 0 Safeguards-by-Design: Guidance for High Temperature Gas Reactors (HTGRs) With Prismatic Fuel Philip Casey Durst (INL Consultant) August 2012 DISCLAIMER This information was prepared as an account of work sponsored by an agency of the U.S. Government. Neither the U.S. Government nor any agency thereof, nor any of their employees, makes any warranty, expressed or implied, or assumes

  15. PCLC flake-based apparatus and method

    DOE Patents [OSTI]

    Cox, Gerald P; Fromen, Cathy A; Marshall, Kenneth L; Jacobs, Stephen D

    2012-10-23

    A PCLC flake/fluid host suspension that enables dual-frequency, reverse drive reorientation and relaxation of the PCLC flakes is composed of a fluid host that is a mixture of: 94 to 99.5 wt % of a non-aqueous fluid medium having a dielectric constant value .di-elect cons., where 1<.di-elect cons.<7, a conductivity value .sigma., where 10.sup.-9>.sigma.>10.sup.-7 Siemens per meter (S/m), and a resistivity r, where 10.sup.7>r>10.sup.10 ohm-meters (.OMEGA.-m), and which is optically transparent in a selected wavelength range .DELTA..lamda.; 0.0025 to 0.25 wt % of an inorganic chloride salt; 0.0475 to 4.75 wt % water; and 0.25 to 2 wt % of an anionic surfactant; and 1 to 5 wt % of PCLC flakes suspended in the fluid host mixture. Various encapsulation forms and methods are disclosed including a Basic test cell, a Microwell, a Microcube, Direct encapsulation (I), Direct encapsulation (II), and Coacervation encapsulation. Applications to display devices are disclosed.

  16. Pinch Me - I'm Fusing!

    SciTech Connect (OSTI)

    DERZON,MARK S.

    2000-07-19

    The process of combining nuclei (the protons and neutrons inside an atomic nucleus) together with a release of kinetic energy is called fusion. This process powers the Sun, it contributes to the world stockpile of weapons of mass destruction and may one day generate safe, clean electrical power. Understanding the intricacies of fusion power, promised for 50 years, ,is sometimes difficult because there are a number of ways of doing it. There is hot fusion, cold fusion and con-fusion. Hot fusion is what powers suns through the conversion of mass energy to kinetic energy. Cold fusion generates con-fusion and nobody really knows what it is. Honestly - this is true. There does seem to be something going on here; I just don't know what. Apparently some experimenters get energy out of a process many call cold fission but no one seems to know what it is, or how to do it reliably. It is not getting much attention from the mainline physics community. Even so, no one is generating electrical power for you and me with either method. In this article 1 will point out some basic features of the mainstream approaches taken to hot fusion power, as well as describe why z pinches are worth pursuing as a driver for a power reactor and may one day generate electrical power for mankind.

  17. Pinch me - I'm fusing! Fusion Power - what is it? What is a z pinch? And why are z-pinches a promising fusion power technology?

    SciTech Connect (OSTI)

    DERZON,MARK S.

    2000-03-01

    The process of combining nuclei (the protons and neutrons inside an atomic nucleus) together with a release of kinetic energy is called fusion. This process powers the Sun, it contributes to the world stockpile of weapons of mass destruction and may one day generate safe, clean electrical power. Understanding the intricacies of fusion power, promised for 50 years, is sometimes difficult because there are a number of ways of doing it. There is hot fusion, cold fusion and con-fusion. Hot fusion is what powers suns through the conversion of mass energy to kinetic energy. Cold fusion generates con-fusion and nobody really knows what it is. Even so, no one is generating electrical power for you and me with either method. In this article the author points out some basic features of the mainstream approaches taken to hot fusion power, as well as describe why z pinches are worth pursuing as a driver for a power reactor and how it may one day generate electrical power for mankind.

  18. Review of consolidated Edison`s integrated resource bidding program

    SciTech Connect (OSTI)

    Goldman, C.A.; Busch, J.F.; Kahn, E.P.; Baldick, R.; Milne, A.

    1993-07-01

    Competitive bidding has emerged as the dominant method for procuring new resources by US utilities. In New York, the Public Service Commission (NYPSC) ordered the state`s seven investor-owned utilities to develop bidding programs to acquire supply and DSM resource options. Utilities were allowed significant discretion in program design in order to encourage experimentation. Competitive bidding programs pose formidable policy, design, and management challenges for utilities and their regulators. Yet, there have been few detailed case studies of bidding programs, particularly of those utilities that take on the additional challenge of having supply and DSM resources compete head-to-head for a designated block of capacity. To address that need, the New York State Energy Research and Development Authority (NYSERDA), the New York Department of Public Service, and the Department of Energy`s Integrated Resource Planning program asked Lawrence Berkeley Laboratory (LBL) to review the bidding programs of two utilities that tested the integrated ``all-sources`` approach. This study focuses primarily on Consolidated Edison Company of New York`s (Con Edison) bidding program; an earlier report discusses our review of Niagara Mohawk`s program (Goldman et al 1992). We reviewed relevant Commission decisions, utility filings and signed contracts, interviewed utility and regulatory staff, surveyed DSM bidders and a selected sample of DSM non-bidders, and analyzed the bid evaluation system used in ranking bids based on detailed scoring information on individual bids provided by Con Edison.

  19. Understanding and controlling low-temperature aging of nanocrystalline materials.

    SciTech Connect (OSTI)

    Battaile, Corbett Chandler; Boyce, Brad Lee; Brons, Justin G.; Foiles, Stephen Martin; Hattar, Khalid Mikhiel; Holm, Elizabeth Ann; Padilla, Henry A.,; Sharon, John Anthony; Thompson, Gregory B.

    2013-10-01

    Nanocrystalline copper lms were created by both repetitive high-energy pulsed power, to produce material without internal nanotwins; and pulsed laser deposition, to produce nan- otwins. Samples of these lms were indented at ambient (298K) and cryogenic temperatures by immersion in liquid nitrogen (77K) and helium (4K). The indented samples were sectioned through the indented regions and imaged in a scanning electron microscope. Extensive grain growth was observed in the lms that contained nanotwins and were indented cryogenically. The lms that either lacked twins, or were indented under ambient conditions, were found to exhibit no substantial grain growth by visual inspection. Precession transmission elec- tron microscopy was used to con rm these ndings quantitatively, and show that 3 and 7 boundaries proliferate during grain growth, implying that these interface types play a key role in governing the extensive grain growth observed here. Molecular dynamics sim- ulations of the motion of individual grain boundaries demonstrate that speci c classes of boundaries - notably 3 and 7 - exhibit anti- or a-thermal migration, meaning that their mobilities either increase or do not change signi cantly with decreasing temperature. An in-situ cryogenic indentation capability was developed and implemented in a transmission electron microscope. Preliminary results do not show extensive cryogenic grain growth in indented copper lms. This discrepancy could arise from the signi cant di erences in con g- uration and loading of the specimen between the two approaches, and further research and development of this capability is needed.

  20. Development of quality control procedures for mass produced and released Bactrocera Philippinensis (Diptera: Tephritidae) for sterile insect technique programs

    SciTech Connect (OSTI)

    Resilva, S.; Obra, G.; Zamora, N.; Gaitan, E.

    2007-03-15

    Quality control procedures for Bactrocera philippinensis Drew and Hancock 1994 (Diptera: Tephritidae) used in sterile insect technique (SIT) programs were established in the mass rearing facility at the Philippine Nuclear Research Institute. Basic studies on pupal irradiation, holding/packaging systems, shipping procedures, longevity, sterility studies, and pupal eye color determination in relation to physiological development at different temperature regimes were investigated. These studies will provide baseline data for the development of quality control protocols for an expansion of B. philippinensis field programs with an SIT component in the future. (author) [Spanish] Los procedimientos de control de calidad para Bactrocera philippinensis Drew y Hancock 1994 (Diptera: Tephritidae) usados en programas de la tecnica de insecto esteril (TIE) fueron establecidos en la facilidad de cria en masa del Instituto Filipino de Investigacion Nuclear. Estudios basicos sobre la irradiacion de las pupas, sistemas de almacenaje/empaque, procedimientos del envio, longevidad, estudios de esterilidad y la determinacion del color de ojo de la pupa en relacion con el desarrollo fisiologico en regimenes diferentes de temperatura fueron investigados. Estos estudios proveeran una linea de informacion basica para el desarrollo de protocolos de control de calidad para una expansion de los programas de campo para B. philippinensis con un componente de TIS en el futuro. (author)

  1. Establishment of Lipolexis oregmae (Hymenoptera: Aphidiidae) in a classical biological control program directed against the brown citrus aphid (Homoptera: Aphididae) in Florida

    SciTech Connect (OSTI)

    Persad, A.B.; Hoy, M.A.; Ru Nguyen

    2007-03-15

    The parasitoid Lipolexis oregmae Gahan (introduced as L. scutellaris Mackauer) was imported from Guam, evaluated in quarantine, mass reared, and released into citrus groves in Florida in a classical biological control program directed against the brown citrus aphid, Toxoptera citricida Kirkaldy. Releases of 20,200, 12,100, and 1,260 adults of L. oregmae were made throughout Florida during 2000, 2001, and 2002, respectively. To determine if L. oregmae had successfully established, surveys were conducted throughout the state beginning in the summer of 2001 and continuing through the summer of 2003. Parasitism during 2001 and 2002 was evaluated by holding brown citrus aphids in the laboratory until parasitoid adults emerged. Lipolexis oregmae was found in 10 sites in 7 counties and 4 sites in 3 counties with parasitism rates ranging from 0.7 to 3.3% in 2001 and 2002, respectively. Laboratory tests indicated that high rates of mortality occurred if field-collected parasitized aphids were held in plastic bags, so a molecular assay was used that allowed immature L. oregmae to be detected within aphid hosts immediately after collection. The molecular assay was used in 2003 with the brown citrus aphids and with other aphid species collected from citrus, weeds, and vegetables near former release sites; immatures of L. oregmae were detected in black citrus aphids, cowpea aphids, spirea aphids, and melon aphids, as well as in the brown citrus aphid, in 4 of 8 counties sampled, with parasitism ranging from 2.0 to 12.9%, indicating that L. oregmae is established and widely distributed. Samples taken in Polk County during Oct 2005 indicated that L. oregmae has persisted. The ability of L. oregmae to parasitize other aphid species on citrus, and aphids on other host plants, enhances the ability of L. oregmae to persist when brown citrus aphid populations are low. (author) [Spanish] El parasitoide Lipolexis oregmae Gahan (introducido como L. scutellaris Mackauer) fue importado de Guam, evaluado en cuarentena, criado en masa y liberado en huertos de citricos en un programa de control biologico clasico dirigido contra el afido pardo de citricos, Toxoptera citricida Kirkaldy. Se hicieron liberaciones de 20,200, 12,100, y 1,260 adultos de L. oregmae a traves de la Florida durante los anos de 2000, 2001, y 2002, respectivamente. Para determinar si L. oregmae ha logrado en establecer, se realizaron sondeos a traves del estado empezando en el verano del 2001 y continuando hasta el final del verano del 2003. El parasitismo durante 2001 y 2002 fue evaluado con el mantenimiento de individuos del afido pardo de los citricos en el laboratorio hasta que los adultos emergieron. Lipolexis oregmae fue encontrado en 10 sitios en 7 condados y con tasas de parasitismo en 4 sitios en 3 condados entre 0.7 a 3.3% en el 2001 y 2002, respectivamente. Las pruebas del laboratorio indicaron que las tasas altas de mortalidad fueron posibles si los afidos con parasitos recolectados en el campo fueron mantenidos en bolsas plasticas, entonces un ensayo molecular fue usado con lo que permitio la deteccion de inmaduros de L. oregmae dentro de los hospederos de afidos inmediatamente despues de la recoleccion. El ensayo molecular fue usado en el 2003 con individuos del afido pardo de los citricos y con otras especies de afidos recolectados sobre citricos, malezas y hortalizas cerca de los sitios donde los parasitoides fueron liberados anteriormente; inmaduros de L. oregmae fueron detectados en individuos del afido negro de los citricos, el afido del caupi, el afido spirea y el afido del melon, ademas del afido pardo de los citricos en 4 de los 8 condados muestreados, con la tasa del parasitismo entre 2.0 a12.9%, indicando que L. oregmae estaba estabecido y ampliamente distribuido. Las muestras tomadas en el Condado de Polk durante octobre del 2005 indicaron que L. oregmae ha persistido. La capacidad de L. oregmae para parasitar otras especies de afidos sobre citricos y otros afidos sobre otras plantas hospederas, incrementa la capacidad de L. oregmae para persistir cuand

  2. Structures with negative index of refraction

    DOE Patents [OSTI]

    Soukoulis, Costas M.; Zhou, Jiangfeng; Koschny, Thomas; Zhang, Lei; Tuttle, Gary

    2011-11-08

    The invention provides simplified negative index materials (NIMs) using wire-pair structures, 4-gap single ring split-ring resonator (SRR), fishnet structures and overleaf capacitor SRR. In the wire-pair arrangement, a pair of short parallel wires and continuous wires are used. In the 4-gap single-ring SRR, the SRRs are centered on the faces of a cubic unit cell combined with a continuous wire type resonator. Combining both elements creates a frequency band where the metamaterial is transparent with simultaneously negative .di-elect cons. and .mu.. In the fishnet structure, a metallic mesh on both sides of the dielectric spacer is used. The overleaf capacitor SRR changes the gap capacities to small plate capacitors by making the sections of the SRR ring overlap at the gaps separated by a thin dielectric film. This technique is applicable to conventional SRR gaps but it best deploys for the 4-gap single-ring structures.

  3. Interconnecting PV on New York City's Secondary Network Distribution System

    SciTech Connect (OSTI)

    K. Anderson; M. Coddington; K. Burman; S. Hayter; B. Kroposki; and A. Watson

    2009-11-30

    The U.S. Department of Energy (DOE) has teamed with cities across the country through the Solar America Cities (SAC) partnership program to help reduce barriers and accelerate implementation of solar energy. The New York City SAC team is a partnership between the City University of New York (CUNY), the New York City Mayor s Office of Long-term Planning and Sustainability, and the New York City Economic Development Corporation (NYCEDC).The New York City SAC team is working with DOE s National Renewable Energy Laboratory (NREL) and Con Edison, the local utility, to develop a roadmap for photovoltaic (PV) installations in the five boroughs. The city set a goal to increase its installed PV capacity from1.1 MW in 2005 to 8.1 MW by 2015 (the maximum allowed in 2005). A key barrier to reaching this goal, however, is the complexity of the interconnection process with the local utility. Unique challenges are associated with connecting distributed PV systems to secondary network distribution systems (simplified to ???¢????????networks???¢??????? in this report). Although most areas of the country use simpler radial distribution systems to distribute electricity, larger metropolitan areas like New York City typically use networks to increase reliability in large load centers. Unlike the radial distribution system, where each customer receives power through a single line, a network uses a grid of interconnected lines to deliver power to each customer through several parallel circuits and sources. This redundancy improves reliability, but it also requires more complicated coordination and protection schemes that can be disrupted by energy exported from distributed PV systems. Currently, Con Edison studies each potential PV system in New York City to evaluate the system s impact on the network, but this is time consuming for utility engineers and may delay the customer s project or add cost for larger installations. City leaders would like to streamline this process to facilitate faster, simpler, and less expensive distributed PV system interconnections. To assess ways to improve the interconnection process, NREL conducted a four-part study with support from DOE. The NREL team then compiled the final reports from each study into this report. In Section 1???¢????????PV Deployment Analysis for New York City???¢????????we analyze the technical potential for rooftop PV systems in the city. This analysis evaluates potential PV power production in ten Con Edison networks of various locations and building densities (ranging from high density apartments to lower density single family homes). Next, we compare the potential power production to network loads to determine where and when PV generation is most likely to exceed network load and disrupt network protection schemes. The results of this analysis may assist Con Edison in evaluating future PV interconnection applications and in planning future network protection system upgrades. This analysis may also assist other utilities interconnecting PV systems to networks by defining a method for assessing the technical potential of PV in the network and its impact on network loads. Section 2???¢????????A Briefing for Policy Makers on Connecting PV to a Network Grid???¢????????presents an overview intended for nontechnical stakeholders. This section describes the issues associated with interconnecting PV systems to networks, along with possible solutions. Section 3???¢????????Technical Review of Concerns and Solutions to PV Interconnection in New Y

  4. I

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    n s'tellnr nucleosynthesis, neutron capture a t a r a t e which i s slow con- pared t o t h a t of Since t h e e a r l y quantitative s t u d i e s of t h e g-process by Clayton, Fowler, HULL, and Zimemaan (1961), considerable e f f o r t has been mc?e t o determine t h e possible distributions of neutron exposures which d g h t have led Lo the observed r e h solar-system abudances of those r u e l e i p r d u c e d i n t h e 2-process. g beta-decays has been designated as t h e s-process. I n p

  5. Conference B.Bettelheim

    ScienceCinema (OSTI)

    None

    2011-04-25

    Le Dr.Bruno Bettelheim, psychologue américain, d'origine viennoise, a passé son doctorat en psychologie à l'université de Vienne. Il émigra aux Etats-Unis et enseigna la psychologie au Rockford College en Illinois et la psychologie de l'éducation à L'université de Chicago, où il dirigea également l'institut orthogénique Sonia-Shankman pour le traitement des enfants psychotiques. Cet homme a bouleversé la compréhension des relations parents et enfants en y introduisant la psychanalyse. Basé sur ses expériences aux Etats-Unis,il nous parle des changements dans la structure de la famille et ses conséquences pour la relation entre enfants et parents.

  6. Increased photocatalytic activity of TiO2 mesoporous microspheres from codoping with transition metals and nitrogen

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mathis, John E.; Lieffers, Justin J.; Mitra, Chandrima; Reboredo, Fernando A.; Bi, Z.; Bridges, Craig A.; Kidder, Michelle K.; Paranthaman, Mariappan Parans

    2015-11-06

    The composition of anatase TiO2 was modified by codoping using combinations of a transition metal and nitrogen in order to increase its photocatalytic activity and extend it performance in the visible region of the electromagnetic spectrum. The transition metals (Mn, Co, Ni, Cu) were added during the hydrothermal preparation of mesoporous TiO2 particles, and the nitrogen was introduced by post-annealing in flowing ammonia gas at high temperature. The samples were analyzed by SEM, XRD, BET, inductively-coupled plasma spectroscopy, and diffuse reflectance UV-vis spectroscopy. The photocatalytic activity was assessed by observing the change in methylene blue concentrations under both UV-vis andmore » visible-only light irradiation. As a result, the photocatalytic activity of the (Mn,N), (Co,N), (Cu,N), and Ni,N) codoped TiO2 was significantly enhanced relative to (N) TiO2.« less

  7. Emulation to simulate low resolution atmospheric data

    SciTech Connect (OSTI)

    Hebbur Venkata Subba Rao, Vishwas [ORNL; Archibald, Richard K [ORNL; Evans, Katherine J [ORNL

    2012-08-01

    Climate simulations require significant compute power, they are complex and therefore it is time consuming to simulate them. We have developed an emulator to simulate unknown climate datasets. The emulator uses stochastic collocation and multi-dimensional in- terpolation to simulate the datasets. We have used the emulator to determine various physical quantities such as temperature, short and long wave cloud forcing, zonal winds etc. The emulation gives results which are very close to those obtained by simulations. The emulator was tested on 2 degree atmospheric datasets. The work evaluates the pros and cons of evaluating the mean first and inter- polating and vice versa. To determine the physical quantities, we have assumed them to be a function of time, longitude, latitude and a random parameter. We have looked at parameters that govern high stable clouds, low stable clouds, timescale for convection etc. The emulator is especially useful as it requires negligible compute times when compared to the simulation itself.

  8. Vectorized garbage collection

    SciTech Connect (OSTI)

    Appel, A.W.; Bendiksen, A.

    1988-01-01

    Garbage collection can be done in vector mode on supercomputers like the Cray-2 and the Cyber 205. Both copying collection and mark-and-sweep can be expressed as breadth-first searches in which the queue can be processed in parallel. The authors have designed a copying garbage collector whose inner loop works entirely in vector mode. The only significant limitation of the algorithm is that if the size of the records is not constant, the implementation becomes much more complicated. The authors give performance measurements of the algorithm as implemented for Lisp CONS cells on the Cyber 205. Vector-mode garbage collection performs up to 9 times faster than scalar-mode collection.

  9. Integrating Renewable Energy Requirements Into Building Energy Codes

    SciTech Connect (OSTI)

    Kaufmann, John R.; Hand, James R.; Halverson, Mark A.

    2011-07-01

    This report evaluates how and when to best integrate renewable energy requirements into building energy codes. The basic goals were to: (1) provide a rough guide of where we’re going and how to get there; (2) identify key issues that need to be considered, including a discussion of various options with pros and cons, to help inform code deliberations; and (3) to help foster alignment among energy code-development organizations. The authors researched current approaches nationally and internationally, conducted a survey of key stakeholders to solicit input on various approaches, and evaluated the key issues related to integration of renewable energy requirements and various options to address those issues. The report concludes with recommendations and a plan to engage stakeholders. This report does not evaluate whether the use of renewable energy should be required on buildings; that question involves a political decision that is beyond the scope of this report.

  10. Comparison of soft computing techniques for a three-phase oil field centrifuge.

    SciTech Connect (OSTI)

    Smith, R. E.; Parkinson, w; Miller, N.

    2002-01-01

    In this work we compare fuzzy techniques to neural network techniques for building a soft sensor for a three-phase oil field centrifuge. The soft sensor is used in a feed-forward control system that augments a feedback control system. Two approaches were used to develop the soft sensor. The first approach was to use a fuzzy rule based system based upon the experience of an expert operator. The expert operator's experience was supplemented using a computer model of the system. The second approach was to use a neural network to build the inverse of the computer model. The pros and cons of both techniques are discussed. KEYWORDS: fuzzy logic, neural networks, soft sensor, soft computing

  11. LAMMPS | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BOE Reserve Class No 2001 reserves 0.1 - 10 MBOE 10.1 - 100 MBOE 100.1 - 1000 MBOE 1000.1 - 10,000 MBOE 10,000.1 - 100,000 MBOE > 100,000 MBOE Appalachian Basin Boundary C a n a d a N Y P A N Y U S A Appalachian Basin, NY Area (Panel 1 of 7) Oil and Gas Fields By 2001 BOE

    81 § ¨ ¦ 81 LAKESHORE AVON BR ANT-EDEN ALD EN-LANC ASTER AU BURN W SH ELDON CALEDONIA HURON C REEK LEIC EST ER COL DEN ASH FORD INDIAN FALLS LAWTONS SAR DINIA RPD-037 -2 GLENWOOD PU LASKI PAVILION CON CORD COL LINS N

  12. 102940_EEREcoloringbook_spanish.indd

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    folleto para colorear ENERGÍA HIDRÁULICA ENERGÍA SOLAR TU CASA ENERGÍA GEOTÉRMICA BIOENERGÍA ENERGÍA EÓLICA ¡Forma parte de la nueva generación en energía limpia! ponte en onda Energía limpia puede venir del sol. 2 Energía en el viento puede producir electricidad. Nosotros podemos crear energía con el movimiento del agua. Bioenergía viene de plantas que podemos convertir a combustibles. Leña Trocitos de madera Paja Maíz Pastos Altos Podemos usar energía de la tierra para

  13. Ikparlnum

    Office of Legacy Management (LM)

    * a t . . Ikparlnum t of Energy Washington, D.C. 20585 . MAY 30 1980 NOTE' FOR PROM t t b 3 G 5 ' 9 ' F ' i&2&$59 0 9 b . pq4" ywJ= I GUBJ: l;% X , OPINION - AL?THGRITY Q'O DE!CON~IA~~?NA!~?IZ 3"LIIf M lDDLESEX M U lJICIPAL LlUDE'ILL SITE, M IDDLESEX, NEW JERSEY I I am transm itting a lagal memorandum on the authority to decontum inate the M iddlesex Municipal Landfill site, M iddlasex, New Yersex. . This cpiniort is based up0.r an aarliex opinion by Lynn Co2wnan on the c'

  14. Alternative fuels: Promise or Problem

    SciTech Connect (OSTI)

    Moyad, A. )

    1989-11-01

    The Bush administration's proposals to revamp the Clean Air Act received mixed reviews. The alternative fuels proposal in the administration's bill, if passed, would mandate the sale of so-called clean-fueled vehicles (CFVs) in the nine worst ozone non-attainment areas in the country. In areas failing to plan for reductions of volatile organic compounds (VOCs) and toxic air chemicals equivalent to those outlined in the Bush proposal, a total of 500,000 CFVs would have to be sold in 1995, 750,000 in 1996, and 1,000,000 each year from 1997-2004. What is unclear, however, is who will manufacture, sell, or purchase these vehicles. The paper discusses the pros and cons of ethanol, methanol, and compressed natural gas (CNG), the major alternative fuels being considered as supplements or replacements for gasoline.

  15. Roadmap for Peridynamic Software Implementation

    SciTech Connect (OSTI)

    Littlewood, David John

    2015-10-01

    The application of peridynamics for engineering analysis requires an efficient and robust software implementation. Key elements include processing of the discretization, the proximity search for identification of pairwise interactions, evaluation of the con- stitutive model, application of a bond-damage law, and contact modeling. Additional requirements may arise from the choice of time integration scheme, for example esti- mation of the maximum stable time step for explicit schemes, and construction of the tangent stiffness matrix for many implicit approaches. This report summaries progress to date on the software implementation of the peridynamic theory of solid mechanics. Discussion is focused on parallel implementation of the meshfree discretization scheme of Silling and Askari [33] in three dimensions, although much of the discussion applies to computational peridynamics in general.

  16. Running Jobs Scott French" NERSC User Services Group" New User Training"

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    August 13, 2015 Jobs at NERSC * Most a re p arallel j obs ( 10s t o 1 00,000+ c ores) * Produc7on r uns e xecute i n b atch m ode * Interac7ve a nd d ebug j obs a re s upported f or u p t o 3 0 minutes * Typically r un 7 mes a re a f ew t o 1 0s o f h ours. - Each m achine h as d ifferent l imits. - Limits a re n ecessary b ecause o f M TBF a nd t he n eed t o accommodate 5 ,500 u sers' j obs * Also a n umber o f " serial" j obs - Typically " pleasantly p arallel" s imulaCon

  17. Evaluation of Neutron Elastic Scatter (NES) technique for detection of graphitic corrosion in gas cast iron pipe. Final report, March 1996-April 1997

    SciTech Connect (OSTI)

    Charatis, G.; Hugg, E.; McEllistrem, M.

    1997-04-01

    PENETRON, Inc., in two phases, demonstrated the effectiveness of its Neutron elastic Scatter (NES) techniques in detecting the change in the carbon weight percentage (CWt%) as a measure of corrosion in gray cast iron pipe. In Phase I, experiments were performed with synthetic standards supplied by IIT Research Institute (IITRI) to test the applicability of the NES techniques. Irradiation experiments performed at the University of Kentucky showed that CWt% could be detected, ranging from 1.6% to 13%, within an uncertainty of around 4%. In Phase II, experiments were performed on seven (7) corroded pipe sections supplied by MichCon. Tests were made on pipe sliced lengthwise into quarter sections, and in re-assembled whole pipe sections. X-ray films of the quarter sections indicated probable areas of corrosion for each quarter section.

  18. Adapting Human Reliability Analysis from Nuclear Power to Oil and Gas Applications

    SciTech Connect (OSTI)

    Boring, Ronald Laurids

    2015-09-01

    ABSTRACT: Human reliability analysis (HRA), as currently used in risk assessments, largely derives its methods and guidance from application in the nuclear energy domain. While there are many similarities be-tween nuclear energy and other safety critical domains such as oil and gas, there remain clear differences. This paper provides an overview of HRA state of the practice in nuclear energy and then describes areas where refinements to the methods may be necessary to capture the operational context of oil and gas. Many key distinctions important to nuclear energy HRA such as Level 1 vs. Level 2 analysis may prove insignifi-cant for oil and gas applications. On the other hand, existing HRA methods may not be sensitive enough to factors like the extensive use of digital controls in oil and gas. This paper provides an overview of these con-siderations to assist in the adaptation of existing nuclear-centered HRA methods to the petroleum sector.

  19. El Paso, TX Natural Gas Exports to Mexico

    Gasoline and Diesel Fuel Update (EIA)

    Administration (EIA) definitions English FranÇais Español A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Browse terms related to these categories: border crossing electricity border crossing gas border crossing liquid liquefied natural gas terminals natural gas processing plants power plants refineries See index of all terms A

    Referencia cruzada de definición English FranÇais Español A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Explorar los términos relacionados con las

  20. IG SAR 5-09.qxd

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Washington, DC 211585 A p r i l 3 0 , 2009 'I'ile j-j.i?jlorable Dr. S teverr C'~ILI Secretary of X!nergy Washingtont r 9 1 . 1 20585 1 aul pleased to s ~ & j ~ > i ; tilt: C)ffice of Inspector (;eilc.:-al's (OIC:;) Sl:ni,;i:ifi~?.~csI Kc,nar.l lo <;'o.ilg,~~,~..o. T):is report saln3nl;xr:ixes sjgllifi.carlt (>IG acfivi%i;:s and ~~~~~~~~~~~~~~~~L"~II.s during the .c;i>; non nth peri.od er~tjing Mardl 3 1 , 2009. This repn1-t reflc6;ts our con%in.liirrg

  1. Research Toward Zero Energy Homes

    SciTech Connect (OSTI)

    Robert Hammon

    2010-12-31

    This final report was compiled from the detailed annual reports that were submitted for efforts in 2008 and 2009, and from individual task reports from 2010. Reports, case studies, and presentations derived from this work are available through the Building America website. The BIRA team is led by ConSol, a leading provider of energy solutions for builders since 1983. In partnership with over fifty builders, developers, architects, manufactures, researchers, utilities, and agencies, research work was performed in California, Colorado, Utah, New Mexico, Washington, Oregon, and Hawaii and five (5) climate regions (Hot-Dry, Marine, Hot-Humid, Cold, and Hot/Mixed Dry). In addition to research work, the team provided technical assistance to our partners whose interests span the entire building process. During the three year budget period, the BIRA team performed analyses of several emerging technologies, prototype homes, and high performance communities through detailed computer simulations and extensive field monitoring to meet the required climate joule milestone targets.

  2. Full-wave Simulations of ICRF Heating in Toroidal Plasma with Non-Maxwellian Distribution Functions in the FLR Limit

    SciTech Connect (OSTI)

    E.J. Valeo, C.K. Phillips, H. Okuda, J.C. Wright, P.T. Bonoli, L.A. Berry, and the RF SciDAC Team

    2007-07-18

    At the power levels required for signicant heating and current drive in magnetically-con ned toroidal plasma, modi cation of the particle distribution function from a Maxwellian shape is likely [T.H. Stix, Nucl. Fusion, 15:737 1975], with consequent changes in wave propagation and in the location and amount of absorption. In order to study these e ects computationally, the nite-Larmor-radius, full-wave, hot-plasma toroidal simulation code, TORIC [M. Brambilla. Plasma Phys. Controlled Fusion, 41:1, 1999], has been extended to allow the prescription of arbitrary velocity distributions of the form (?||, ??, ?, ?). For H minority heating of a D-H plasma with anisotropic Maxwellian H distributions, the fractional H absorption varies signi cantly with changes in parallel temperature but is essentially independent of perpendicular temperature.

  3. Model Identification for Optimal Diesel Emissions Control

    SciTech Connect (OSTI)

    Stevens, Andrew J.; Sun, Yannan; Song, Xiaobo; Parker, Gordon

    2013-06-20

    In this paper we develop a model based con- troller for diesel emission reduction using system identification methods. Specifically, our method minimizes the downstream readings from a production NOx sensor while injecting a minimal amount of urea upstream. Based on the linear quadratic estimator we derive the closed form solution to a cost function that accounts for the case some of the system inputs are not controllable. Our cost function can also be tuned to trade-off between input usage and output optimization. Our approach performs better than a production controller in simulation. Our NOx conversion efficiency was 92.7% while the production controller achieved 92.4%. For NH3 conversion, our efficiency was 98.7% compared to 88.5% for the production controller.

  4. Observation of the dynamics leading to a conical intersection in dissociative electron attachment to water

    SciTech Connect (OSTI)

    Haxton, Dan; Adaniya, Hidihito; Slaughter, Dan; Rudek, B.; Osipov, Timur; Weber, Thorsten; Rescigno, Tom; McCurdy, Bill; Belkacem, Ali

    2011-06-08

    Following prior work on the lower-energy resonances, we apply techniques of momentum imaging and ab initio scattering calculations to the process of dissociative electron attachment to water via the highest-energy {sup 2}B{sub 2} resonance. We focus on the H{sup -} anion fragment, which is produced via dynamics passing through and avoiding the conical intersection with the lower A{sub 1} state, leading to OH ((sup 2}{Pi}#5;) and OH ({sup 2}{Sigma}#6;), respectively. The momentum imaging technique, when combined with theoretical calculations on the attachment amplitude and dissociation dynamics, demonstrates that the angular distributions provide a signature of the location of the conical intersection in the space of nuclear con#12;gurations.

  5. Description of heat flux measurement methods used in hydrocarbon and propellant fuel fires at Sandia.

    SciTech Connect (OSTI)

    Nakos, James Thomas

    2010-12-01

    The purpose of this report is to describe the methods commonly used to measure heat flux in fire applications at Sandia National Laboratories in both hydrocarbon (JP-8 jet fuel, diesel fuel, etc.) and propellant fires. Because these environments are very severe, many commercially available heat flux gauges do not survive the test, so alternative methods had to be developed. Specially built sensors include 'calorimeters' that use a temperature measurement to infer heat flux by use of a model (heat balance on the sensing surface) or by using an inverse heat conduction method. These specialty-built sensors are made rugged so they will survive the environment, so are not optimally designed for ease of use or accuracy. Other methods include radiometers, co-axial thermocouples, directional flame thermometers (DFTs), Sandia 'heat flux gauges', transpiration radiometers, and transverse Seebeck coefficient heat flux gauges. Typical applications are described and pros and cons of each method are listed.

  6. Ecology problems associated with geothermal development in California

    SciTech Connect (OSTI)

    Shinn, J.H.; Ireland, R.R.

    1980-08-04

    Geothermal power plants have the potential for supplying about 5% of the US electrical generating needs by 1985, and are even now supplying about one third of San Francisco's electricity. Investigations have shown that the typical geothermal field, such as the hot water resource of Imperial Valley, can be developed in an environmentally sound manner when proper considerations are made for ecosystem problems. Experimental evidence is presented pro and con for potential impacts due to habitat disturbance, powerline corridors, noise effects, trace element emissions from cooling towers, accidental brine discharges into aquatic or soil systems, competition for water and H/sub 2/S effects on vegetation. A mitigation and control strategy is recommended for each ecological issue and it is shown where effects are likely to be irreversible.

  7. Parallel architecture for real-time simulation. Master's thesis

    SciTech Connect (OSTI)

    Cockrell, C.D.

    1989-01-01

    This thesis is concerned with the development of a very fast and highly efficient parallel computer architecture for real-time simulation of continuous systems. Currently, several parallel processing systems exist that may be capable of executing a complex simulation in real-time. These systems are examined and the pros and cons of each system discussed. The thesis then introduced a custom-designed parallel architecture based upon The University of Alabama's OPERA architecture. Each component of this system is discussed and rationale presented for its selection. The problem selected, real-time simulation of the Space Shuttle Main Engine for the test and evaluation of the proposed architecture, is explored, identifying the areas where parallelism can be exploited and parallel processing applied. Results from the test and evaluation phase are presented and compared with the results of the same problem that has been processed on a uniprocessor system.

  8. Data co-processing for extreme scale analysis level II ASC milestone (4745).

    SciTech Connect (OSTI)

    Rogers, David; Moreland, Kenneth D.; Oldfield, Ron A.; Fabian, Nathan D.

    2013-03-01

    Exascale supercomputing will embody many revolutionary changes in the hardware and software of high-performance computing. A particularly pressing issue is gaining insight into the science behind the exascale computations. Power and I/O speed con- straints will fundamentally change current visualization and analysis work ows. A traditional post-processing work ow involves storing simulation results to disk and later retrieving them for visualization and data analysis. However, at exascale, scien- tists and analysts will need a range of options for moving data to persistent storage, as the current o ine or post-processing pipelines will not be able to capture the data necessary for data analysis of these extreme scale simulations. This Milestone explores two alternate work ows, characterized as in situ and in transit, and compares them. We nd each to have its own merits and faults, and we provide information to help pick the best option for a particular use.

  9. Recommendations for a Department of Energy Nuclear Energy R and D Agenda Volume 2 Appendices

    SciTech Connect (OSTI)

    1997-12-01

    The current US nuclear energy policy is primarily formulated as part of the nation`s overall energy policy. In addition, nuclear energy policy is impacted by other US policies, such as those for defense and environment, and by international obligations through their effects on nuclear weapons dismantlement and stewardship, continued reliance on space and naval nuclear power sources, defense waste cleanup, and on nuclear nonproliferation. This volume is composed of the following appendices: Appendix 1--Objectives of the Federal Government Nuclear Energy Related Policies and Research and Development Programs; Appendix 2--Nuclear Energy and Related R and D in the US; Appendix 3--Summary of Issues That Drive Nuclear Energy Research and Development; Appendix 4: Options for Policy and Research and Development; Appendix 5--Pros and Cons of Objectives and Options; and Appendices 6--Recommendations.

  10. Issues facing the future use of Alaskan NorthSlope natural gas

    SciTech Connect (OSTI)

    Bowsher, C.A.

    1983-05-12

    The North Slope of Alaska contains over 26 trillion cubic feet of natural gas. In 1977, the President and the Congress approved construction of a 4800-mile gas pipeline to bring this gas to US consumers by 1983. However, completion of the project is not now expected until late 1989 at the earliest. This report examines the status and outlook for the Alaskan gas pipeline (the Alaska Natural Gas Transportation System). It also evaluates the pros and cons of (1) alternative systems to deliver this gas to market, including a gas pipeline with Alaska for export of liquefied natural gas; (2) processing the gas in Alaska by converting it to methanol and petrochemicals for export; and (3) using the gas within Alaska.

  11. Incremental cost pricing of transmission services. Final report

    SciTech Connect (OSTI)

    Not Available

    1994-12-01

    This report, prepared by ICF Resources, under a sub-contract with IT Corporation, is concerned chiefly with examining the economic concepts underlying an Incremental Cost Pricing Framework (ICPF), which is defined here as a pricing regime that takes into account several factors: economic efficiency in terms of sending the correct long-term price signals to both users and owners of transmission assets; pricing of individual services in relationship to cost causation; full recovery of costs associated with transmission service; and applicability to real-world power systems without extraordinary administrative burdens. In the course of this examination, the report makes assumptions, as necessary, and assesses the extent to which they may or may not comport with real-world conditions. It also assesses the pros and cons of different approaches to pricing various components of transmission service without making a recommendation as to the superiority of one approach over another from a public policy perspective.

  12. Deepwater seismic acquisition technology

    SciTech Connect (OSTI)

    Caldwell, J.

    1996-09-01

    Although truly new technology is not required for successful acquisition of seismic data in deep Gulf of Mexico waters, it is helpful to review some basic aspects of these seismic surveys. Additionally, such surveys are likely to see early use of some emerging new technology which can improve data quality. Because such items as depth imaging, borehole seismic, 4-D and marine 3-component recording were mentioned in the May 1996 issue of World Oil, they are not discussed again here. However, these technologies will also play some role in the deepwater seismic activities. What is covered in this paper are some new considerations for: (1) longer data records needed in deeper water, (2) some pros and cons of very long steamer use, and (3) two new commercial systems for quantifying data quality.

  13. Increased photocatalytic activity of TiO2 mesoporous microspheres from codoping with transition metals and nitrogen

    SciTech Connect (OSTI)

    Mathis, John E.; Lieffers, Justin J.; Mitra, Chandrima; Reboredo, Fernando A.; Bi, Z.; Bridges, Craig A.; Kidder, Michelle K.; Paranthaman, Mariappan Parans

    2015-11-06

    The composition of anatase TiO2 was modified by codoping using combinations of a transition metal and nitrogen in order to increase its photocatalytic activity and extend it performance in the visible region of the electromagnetic spectrum. The transition metals (Mn, Co, Ni, Cu) were added during the hydrothermal preparation of mesoporous TiO2 particles, and the nitrogen was introduced by post-annealing in flowing ammonia gas at high temperature. The samples were analyzed by SEM, XRD, BET, inductively-coupled plasma spectroscopy, and diffuse reflectance UV-vis spectroscopy. The photocatalytic activity was assessed by observing the change in methylene blue concentrations under both UV-vis and visible-only light irradiation. As a result, the photocatalytic activity of the (Mn,N), (Co,N), (Cu,N), and Ni,N) codoped TiO2 was significantly enhanced relative to (N) TiO2.

  14. V

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . 1.1 I . COO-30.72-25 11 t 1 Hadronic Form Factors in Asymptotically Free Field Theories David J. Gross and S.B. Treiman Joseph Henry Labor atorie s of Physics -NOTICE- Pri nce ton Uni ver sit y 1 1 This repor t was prep ared as an acco unt of work 1 Pri nce ton , New Jer sey 1 spons ored by the Unite d State s Gove rnme nt. Neith er 1 1 the Un ited Sta tes nor the Un ited Sta tes Ato mic Ene rgy I 08 54 0 1 j Comm issi on, nor any of thei r empl oyee s, nor any of I the ir con trac tors , sub

  15. E

    U.S. Energy Information Administration (EIA) Indexed Site

    | E nergy E fficiency a nd R enewable E nergy eere.energy.gov Data---Driven P olicymaking Elena A lschuler Elena.alschuler@ee.doe.gov Building Technologies Office U.S. D epartment o f E nergy June 2015 2 * Robust a cGon b rings u s i n r ange o f 2 6---28% b elow 2 005 l evels b y 2 025 * Doubling o f d ecarbonizaGon p ace * Consistent w ith r educGons o f > 80% b y 2 050 President's C limate A c=on P lan: 2 025 T argets 3 3 * Clean P ower P lan * Building codes * Appliance & e quipment

  16. Centrifuge Techniques and Apparatus for Transport Experiments in Porous Media

    SciTech Connect (OSTI)

    Earl D. Mattson; Carl D. Paler; Robert W. Smith; Markus Flury

    2010-06-01

    This paper describes experimental approaches and apparatus that we have developed to study solute and colloid transport in porous media using Idaho National Laboratory's 2-m radius centrifuge. The ex-perimental techniques include water flux scaling with applied acceleration at the top of the column and sub-atmospheric pressure control at the column base, automation of data collection, and remote experimental con-trol over the internet. These apparatus include a constant displacement piston pump, a custom designed liquid fraction collector based on switching valve technology, and modified moisture monitoring equipment. Suc-cessful development of these experimental techniques and equipment is illustrated through application to transport of a conservative tracer through unsaturated sand column, with centrifugal acceleration up to 40 gs. Development of such experimental equipment that can withstand high accelerations enhances the centrifuge technique to conduct highly controlled unsaturated solute/colloid transport experiments and allows in-flight liquid sample collection of the effluent.

  17. Slip-stacking Dynamics for High-Power Proton Beams at Fermilab

    SciTech Connect (OSTI)

    Eldred, Jeffrey Scott

    2015-12-01

    Slip-stacking is a particle accelerator con figuration used to store two particle beams with different momenta in the same ring. The two beams are longitudinally focused by two radiofrequency (RF) cavities with a small frequency diff erence between them. Each beam is synchronized to one RF cavity and perturbed by the other RF cavity. Fermilab uses slip-stacking in the Recycler as to double the power of the 120 GeV proton beam in the Main Injector. This dissertation investigates the dynamics of slip-stacking beams analytically, numerically and experimentally. In the analytic analysis, I find the general trajectory of stable slip-stacking particles and identify the slip-stacking parametric resonances. In the numerical analysis, I characterize the stable phase-space area and model the particle losses. In particular, I evaluate the impact of upgrading the Fermilab Booster cycle-rate from 15 Hz to 20 Hz as part of the Proton Improvement Plan II (PIP-II). The experimental analysis is used to verify my approach to simulating slip-stacking loss. I design a study for measuring losses from the longitudinal single-particle dynamics of slip-stacking as a function of RF cavity voltage and RF frequency separation. I further propose the installation of a harmonic RF cavity and study the dynamics of this novel slip-stacking con figuration. I show the harmonic RF cavity cancels out parametric resonances in slip-stacking, reduces emittance growth during slip-stacking, and dramatically enhances the stable phase-space area. The harmonic cavity is expected to reduce slip-stacking losses to far exceed PIP-II requirements. These results raise the possibility of extending slip-stacking beyond the PIP-II era.

  18. The NPR, NPT and the prospects for disarmament

    SciTech Connect (OSTI)

    Pilat, Joseph F

    2010-10-04

    In Prague's Hradcany Square on April 5, 2009, President Barack Obama offered a bold vision of the nuclear future that encompasses both reducing nuclear dangers and pursuing the goal of a world without nuclear weapons while maintaining, as long as nuclear weapons remain, a safe secure, and effective arsenal, to deter potential adversaries and to assure U.S. allies and other security partners that they can count on America's security commitments. The agenda put forward in Prague involves the full range of issues from deterrence to nonproliferation and disarmament. The 2010 Nuclear Posture Review (NPR) report, reflecting the twin objectives of the Prague speech, for the first time places the United States effort to lead expanded international efforts to rebuild and strengthen the global nuclear nonproliferation regime at the top the U.S. nuclear agenda. This attention underscores the fact that the top priority of the United States is to discourage additional states from acquiring nuclear weapon capabilities and to stop terrorist groups from acquiring weapon-usable nuclear materials. It also reinforced the view that positively influencing the 2010 Review Conference (RevCon) of the Parties to the Treaty on the Non-Proliferation of Nuclear Weapons (NPT) was a key objective of the Obama Administration. The NPR developed both the vision and the policy, but details of implementation will need to be developed and better understood. This paper will address the Nuclear Posture Review and its implementation, as well as it's relation to, and impact on, the NPT RevCon and the long term prospects for nonproliferation and disarmament.

  19. QCAD simulation and optimization of semiconductor double quantum dots

    SciTech Connect (OSTI)

    Nielsen, Erik; Gao, Xujiao; Kalashnikova, Irina; Muller, Richard Partain; Salinger, Andrew Gerhard; Young, Ralph Watson

    2013-12-01

    We present the Quantum Computer Aided Design (QCAD) simulator that targets modeling quantum devices, particularly silicon double quantum dots (DQDs) developed for quantum qubits. The simulator has three di erentiating features: (i) its core contains nonlinear Poisson, e ective mass Schrodinger, and Con guration Interaction solvers that have massively parallel capability for high simulation throughput, and can be run individually or combined self-consistently for 1D/2D/3D quantum devices; (ii) the core solvers show superior convergence even at near-zero-Kelvin temperatures, which is critical for modeling quantum computing devices; (iii) it couples with an optimization engine Dakota that enables optimization of gate voltages in DQDs for multiple desired targets. The Poisson solver includes Maxwell- Boltzmann and Fermi-Dirac statistics, supports Dirichlet, Neumann, interface charge, and Robin boundary conditions, and includes the e ect of dopant incomplete ionization. The solver has shown robust nonlinear convergence even in the milli-Kelvin temperature range, and has been extensively used to quickly obtain the semiclassical electrostatic potential in DQD devices. The self-consistent Schrodinger-Poisson solver has achieved robust and monotonic convergence behavior for 1D/2D/3D quantum devices at very low temperatures by using a predictor-correct iteration scheme. The QCAD simulator enables the calculation of dot-to-gate capacitances, and comparison with experiment and between solvers. It is observed that computed capacitances are in the right ballpark when compared to experiment, and quantum con nement increases capacitance when the number of electrons is xed in a quantum dot. In addition, the coupling of QCAD with Dakota allows to rapidly identify which device layouts are more likely leading to few-electron quantum dots. Very efficient QCAD simulations on a large number of fabricated and proposed Si DQDs have made it possible to provide fast feedback for design comparison and optimization.

  20. SU-E-I-51: Use of Blade Sequences in Cervical Spine MR Imaging for Eliminating Motion, Truncation and Flow Artifacts

    SciTech Connect (OSTI)

    Mavroidis, P; Lavdas, E; Kostopoulos, S; Ninos, C; Strikou, A; Glotsos, D; Vlachopoulou, A; Oikonomou, G; Economopoulos, N; Roka, V; Sakkas, G; Tsagkalis, A; Batsikas, G; Statkahis, S; Papanikolaou, N

    2014-06-01

    Purpose: To assess the efficacy of the BLADE technique to eliminate motion, truncation, flow and other artifacts in Cervical Spine MRI compared to the conventional technique. To study the ability of the examined sequences to reduce the indetention and wrap artifacts, which have been reported in BLADE sagittal sequences. Methods: Forty consecutive subjects, who had been routinely scanned for cervical spine examination using four different image acquisition techniques, were analyzed. More specifically, the following pairs of sequences were compared: a) T2 TSE SAG vs. T2 TSE SAG BLADE and b) T2 TIRM SAG vs. T2 TIRM SAG BLADE. A quantitative analysis was performed using the signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR) and relative contrast (ReCon) measures. A qualitative analysis was also performed by two radiologists, who graded seven image characteristics on a 5-point scale (0:non-visualization; 1:poor; 2:average; 3:good; 4:excellent). The observers also evaluated the presence of image artifacts (motion, truncation, flow, indentation). Results: Based on the findings of the quantitative analysis, the ReCON values of the CSF (cerebrospinal fluid)/SC (spinal cord) between TIRM SAG and TIRM SAG BLADE were found to present statistical significant differences (p<0.001). Regarding motion and truncation artifacts, the T2 TSE SAG BLADE was superior compared to the T2 TSE SAG and the T2 TIRM SAG BLADE was superior compared to the T2 TIRM SAG. Regarding flow artifacts, T2 TIRM SAG BLADE eliminated more artifacts compared to the T2 TIRM SAG. Conclusion: The use of BLADE sequences in cervical spine MR examinations appears to be capable of potentially eliminating motion, pulsatile flow and trancation artifacts. Furthermore, BLADE sequences are proposed to be used in the standard examination protocols based on the fact that a significantly improved image quality could be achieved.

  1. The role of plant-soil feedbacks and land-use legacies in restoration of a temperate steppe in northern China

    SciTech Connect (OSTI)

    Jiang, Lili; Han, Xingguo; Zhang, Guangming; Kardol, Paul

    2010-11-01

    Plant soil feedbacks affect plant performance and plant community dynamics; however, little is known about their role in ecological restoration. Here, we studied plant soil feedbacks in restoration of steppe vegetation after agricultural disturbance in northern China. First, we analyzed abiotic and biotic soil properties under mono-dominant plant patches in an old-field restoration site and in a target steppe site. Second, we tested plant soil feedbacks by growing plant species from these two sites on soils from con- and heterospecific origin. Soil properties generally did not differ between the old-field site and steppe site, but there were significant differences among mono-dominant plant patches within the sites. While soil species origin (i.e., the plant species beneath which the soil was collected) affected biomass of individual plant species in the feedback experiment, species-level plant soil feedbacks were neutral . Soil site origin (old-field, steppe) significantly affected biomass of old-field and steppe species. For example, old-field species had higher biomass in old-field soils than in steppe soils, indicating a positive land-use legacy. However, soil site origin effects depended on the plant species beneath which the soils were collected. The predictive value of abiotic and biotic soil properties in explaining plant biomass differed between and within groups of old-field and steppe species. We conclude that the occurrence of positive land-use legacies for old-field species may retard successional replacement of old-field species by steppe species. However, high levels of idiosyncrasy in responses of old-field and steppe plant species to con- and heterospecific soils indicate interspecific variation in the extent to which soil legacies and plant soil feedbacks control successional species replacements in Chinese steppe ecosystems.

  2. ELECTRICAL SUBSTATION RELIABILITY EVALUATION WITH EMPHASIS ON EVOLVING INTERDEPENDENCE ON COMMUNICATION INFRASTRUCTURE.

    SciTech Connect (OSTI)

    AZARM,M.A.BARI,R.A.MUSICKI,Z.

    2004-01-15

    The objective of this study is to develop a methodology for a probabilistic assessment of the reliability and security of electrical energy distribution networks. This includes consideration of the future grid system, which will rely heavily on the existing digitally based communication infrastructure for monitoring and protection. Another important objective of this study is to provide information and insights from this research to Consolidated Edison Company (Con Edison) that could be useful in the design of the new network segment to be installed in the area of the World Trade Center in lower Manhattan. Our method is microscopic in nature and relies heavily on the specific design of the portion of the grid being analyzed. It extensively models the types of faults that a grid could potentially experience, the response of the grid, and the specific design of the protection schemes. We demonstrate that the existing technology can be extended and applied to the electrical grid and to the supporting communication network. A small subsection of a hypothetical grid based on the existing New York City electrical grid system of Con Edison is used to demonstrate the methods. Sensitivity studies show that in the current design the frequency for the loss of the main station is sensitive to the communication network reliability. The reliability of the communication network could become a more important contributor to the electrical grid reliability as the utilization of the communication network significantly increases in the near future to support ''smart'' transmission and/or distributed generation. The identification of potential failure modes and their likelihood can support decisions on potential modifications to the network including hardware, monitoring instrumentation, and protection systems.

  3. CONSOLIDATION OF K BASIN SLUDGE DATA AND EXPERIENCES ON AGGLOMERATE FORMATION

    SciTech Connect (OSTI)

    HILL SR

    2010-06-10

    The formation of high sludge strength agglomerates is a key concern to the Sludge Treatment Project (STP) to ensure the sludge can be retrieved after planned storage for up to 10 years in Sludge Transport and Storage Containers (STSC) at T Plant. This report addresses observations of agglomerate formation, conditions that the data shows lead to agglomeration, the frequency of agglomerate formation and postulated physiochemical mechanisms that may lead to agglomeration. Although the exact underlying chemistry of K Basin sludge agglomerate formation is not known, the factors that lead to agglomeration formation, based on observations, are as follows: (1) High Total Uranium Content (i.e., sample homogeneity and influence from other constituents); (2) Distribution of Uranium Phases (i.e., extent of conversion from uraninite to uranium oxide hydroxide compounds); (3) Sample Dry-out (loss of cover water); (4) Elevated temperature; (5) Solubility ofU(IV) phases vs. U(VI) phases; and (6) Long storage times. Agglomerated sludge has occurred infrequently and has only been observed in four laboratory samples, five samples subjected to hydrothermal testing (performed for 7 to 10 hours at {approx}185 C and 225 psig), and indirectly during six sampling events in the KE Basin. In the four laboratory samples where agglomerates were observed, the agglomerates exhibited high shear strength and the sample container typically had to be broken to remove the solids. The total uranium content (dry basis) for the four samples (KE Pit, KC-2/3 SS, KC-2/3 M250 and 96-13) were {approx}8 wt%, {approx}59.0 wt%, 68.3 wt% and 82 wt%. The agglomerates that were present during the six sampling events were undoubtedly disturbed and easily broken apart during sample collection, thus no agglomerates were observed in subsequent laboratory analyses. The highest shear strengths measured for K Basin sludge samples were obtained after hydrothermal treatment (7 to 10 hr at 185 C) of high-uranium-content KE canister sludge. The unconfined compressive strength of samples from this testing, measured by a pocket penetrometer, infers that their shear strength may be between 120 kPa and 170 kPa (PNNL-16496). These short-duration hydrothermal tests were conducted at temperatures much greater than the temperature of the T Plant canyon cells (-7 C to 33 C); however, the strength results provide an initial bounding target for sludge stored for many years, and an upper range for simulants (042910-53451-TP02 Rev 1). Sampling and characterization activities conducted in 2009 have measured the total uranium content and speciation for sludge stored in Engineered Containers SCS-CON-220, -240, -250, and -260 (PNNL-19035). Based on on-going testing that has measured the shear strength of uranium samples containing varying uranium (IV) to uranium (VI) ratios and the characterization of the Engineered Containers SCS-CON-220, -240, -250, and -260, it is unlikely that agglomerates will form on a large scale in this sludge. The highest measured total uranium concentration in the Engineered Container SCS-CON-220 sludge is 35.2 wt% and only 4 wt% to 6 wt% (dry) in Engineered Containers SCS-CON -240, -250, and -260. The uranium concentrations in Engineered Containers SCS-CON-220, -240, -250, and -260 sludge are below the threshold for agglomerate formation. Settler sludge however is estimated to contain {approx} 80 wt% (dry) total uranium, which could lead to the formation of high strength agglomerates depending on the relative concentrations of U(IV) and U(VI) compounds. One of the chief concerns of the STP is sludge dry-out. Samples archived in PNNL hot cells have been known to dry out and form hard clods of material, which are then difficult to reconstitute (HNF-6705). In 1996, all but one of the samples archived at the 222-S Laboratory dried out. These samples were composed of sludge collected from the KE Basin floor and Weasel Pit. However, in the STP's current design plans for sludge stored in STSCs at T Plant, there are provisions for continual water level observation and periodic water replenishment when needed, which dramatically lowers the risk of a dryout event. Recent 2009 KE Engineered Container sludge and KW Engineered Container sludge physical characterization lead to opportunistic data on the behavior of dried sludge. As shown in section 5 of this report, sludge core samples taken from Engineered Container 220 that have inadvertently dried after characterization activities indicate that the sludge is mostly composed of very 'weak' and friable solids. Since Engineered Container SCS-CON-220 sludge has the highest total uranium (uranium metal and uranium oxide) concentration of the four Engineered Containers sampled to date, if a dry-out event should occur in the STSC while stored at T Plant there is qualitative evidence to suggest that the solids would be 'weak' and friable in nature and thus easily mobilized.

  4. Structural Health Monitoring for Impact Damage in Composite Structures.

    SciTech Connect (OSTI)

    Roach, Dennis P.; Raymond Bond; Doug Adams

    2014-08-01

    Composite structures are increasing in prevalence throughout the aerospace, wind, defense, and transportation industries, but the many advantages of these materials come with unique challenges, particularly in inspecting and repairing these structures. Because composites of- ten undergo sub-surface damage mechanisms which compromise the structure without a clear visual indication, inspection of these components is critical to safely deploying composite re- placements to traditionally metallic structures. Impact damage to composites presents one of the most signi fi cant challenges because the area which is vulnerable to impact damage is generally large and sometimes very dif fi cult to access. This work seeks to further evolve iden- ti fi cation technology by developing a system which can detect the impact load location and magnitude in real time, while giving an assessment of the con fi dence in that estimate. Fur- thermore, we identify ways by which impact damage could be more effectively identi fi ed by leveraging impact load identi fi cation information to better characterize damage. The impact load identi fi cation algorithm was applied to a commercial scale wind turbine blade, and results show the capability to detect impact magnitude and location using a single accelerometer, re- gardless of sensor location. A technique for better evaluating the uncertainty of the impact estimates was developed by quantifying how well the impact force estimate meets the assump- tions underlying the force estimation technique. This uncertainty quanti fi cation technique was found to reduce the 95% con fi dence interval by more than a factor of two for impact force estimates showing the least uncertainty, and widening the 95% con fi dence interval by a fac- tor of two for the most uncertain force estimates, avoiding the possibility of understating the uncertainty associated with these estimates. Linear vibration based damage detection tech- niques were investigated in the context of structural stiffness reductions and impact damage. A method by which the sensitivity to damage could be increased for simple structures was presented, and the challenges of applying that technique to a more complex structure were identi fi ed. The structural dynamic changes in a weak adhesive bond were investigated, and the results showed promise for identifying weak bonds that show little or no static reduction in stiffness. To address these challenges in identifying highly localized impact damage, the possi- bility of detecting damage through nonlinear dynamic characteristics was also identi fi ed, with a proposed technique which would leverage impact location estimates to enable the detection of impact damage. This nonlinear damage identi fi cation concept was evaluated on a composite panel with a substructure disbond, and the results showed that the nonlinear dynamics at the damage site could be observed without a baseline healthy reference. By further developing impact load identi fi cation technology and combining load and damage estimation techniques into an integrated solution, the challenges associated with impact detection in composite struc- tures can be effectively solved, thereby reducing costs, improving safety, and enhancing the operational readiness and availability of high value assets.

  5. High Power Coax Window

    SciTech Connect (OSTI)

    Neubauer, M. L.; Dudas, A.; Sah, R.; Elliott, T. S.; Rimmer, R. A.; Stirbet, M. S.

    2010-05-23

    A su­per­con­duct­ing RF (SRF) power cou­pler ca­pa­ble of han­dling 500 kW CW RF power is re­quired for pre­sent and fu­ture stor­age rings and linacs. There are over 35 cou­pler de­signs for SRF cav­i­ties rang­ing in fre­quen­cy from 325 to 1500 MHz. Cou­pler win­dows vary from cylin­ders to cones to disks, and RF power cou­plers are lim­it­ed by the abil­i­ty of ce­ram­ic win­dows to with­stand the stress­es due to heat­ing and me­chan­i­cal flex­ure. We pro­pose a novel ro­bust co-ax­i­al SRF cou­pler de­sign which uses com­pressed win­dow tech­nol­o­gy. This tech­nol­o­gy will allow the use of high­ly ther­mal­ly con­duc­tive ma­te­ri­als for cryo­genic win­dows. Using com­pressed win­dow tech­niques on disk co-ax­i­al win­dows will make sig­nif­i­cant im­prove­ments in the power han­dling of SRF cou­plers. We pre­sent the bench test re­sults of two win­dow as­sem­blies back to back, as well as in­di­vid­u­al win­dow VSWR in EIA3.125 coax. A vac­u­um test as­sem­bly was made and the win­dows baked out at 155C. The pro­cess­es used to build win­dows is scal­able to larg­er di­am­e­ter coax and to high­er power lev­els.

  6. Open-field host specificity test of Gratiana boliviana (Coleoptera: Chrysomelidae), a biological control agent of tropical soda apple (Solanaceae) in the United States

    SciTech Connect (OSTI)

    Gandolfo, D.; McKay, F.; Medal, J.C.; Cuda, J.P.

    2007-03-15

    An open-field experiment was conducted to assess the suitability of the South American leaf feeding beetle Gratiana boliviana Spaeth for biological control of Solanum viarum Dunal in the USA. An open-field test with eggplant, Solanum melongena L., was conducted on the campus of the University of Buenos Aires, Argentina, and a S. viarum control plot was established 40 km from the campus. One hundred adult beetles were released in each plot at the beginning of the experiment during the vegetative stage of the plants, and forty additional beetles were released in the S. melongena plot at the flowering stage. All the plants in each plot were checked twice a week and the number of adults, immatures, and eggs recorded. Results showed almost a complete rejection of eggplant by G. boliviana. No noticeable feeding damage was ever recorded on eggplant. The experiment was ended when the eggplants started to senesce or were severely damaged by whiteflies and spider mites. The results of this open-field experiment corroborate previous quarantine/laboratory host-specificity tests indicating that a host range expansion of G. boliviana to include eggplant is highly unlikely. Gratiana boliviana was approved for field release in May 2003 in the USA. To date, no non-target effects have been observed either on eggplant or native species of Solanum. (author) [Spanish] Una prueba de campo fue conducida para evaluar la especificidad del escarabajo suramericano defoliador Gratiana boliviana Spaeth para control biologico de Solanum viarum Dunal en los Estados Unidos. La prueba con berenjena se realizo en el campo experimental de la Universidad de Buenos Aires, Argentina, y una parcela control con S. viarum fue establecida a 40 km. Cien escarabajos adultos fueron liberados en cada parcela al inicio del experimento durante la fase vegetativa, y cuarenta escarabajos adicionales fueron liberados en la parcela de berenjena durante la floracion. Todas las plantas en cada parcela fueron inspeccionadas dos veces a la semana y el numero de adultos, larvas, y posturas fueron registrados. Resultados indicaron un casi completo rechazo de la berenjena por G. boliviana. Ningun dano visible de defoliacion en la berenjena fue detectado. Las pruebas concluyeron cuando las plantas de berenjena alcazaron su madurez o fueron severamente danadas por mosca blanca y acaros. Resultados corroboran previas pruebas de especificidad en laboratorio/cuarentena que indican que la berenjena no es un hospedero de G. boliviana y que la posibilidad de llegar a ser una plaga de este cultivo es muy remota. Gratiana boliviana fue aprobado para ser liberado en el campo en mayo del 2003. Ningun dano ha sido observado hasta la fecha a plantas no blanco. (author)

  7. Investigation of Public Discourse Methods in Energy Policy Decision-Making: A Summary of What You Told Us and What We Learned

    SciTech Connect (OSTI)

    Analysis Team; Eileen DeShazo; John Freemuth; Tina Giannini; Troy Hall; Ann Hunter; Jeffrey C. Joe; Michael Louis; Carole Nemnich; Jennie Newman; Steven J. Piet; Stephen Sorensen; Paulina Starkey; Kendella Vogt; Patrick Wilson

    2010-09-01

    The ground is littered with projects that failed because of strong public opposition, including natural gas and coal power plants proposed in Idaho over the past several years. This joint project , of the Idaho National Laboratory, Boise State University, Idaho State University and University of Idaho has aimed to add to the tool box to reduce project risk through encouraging the public to engage in more critical thought and be more actively involved in public or social issues. Early in a project, project managers and decision-makers can talk with no one, pro and con stakeholder groups, or members of the public. Experience has shown that talking with no one outside of the project incurs high risk because opposition stakeholders have many means to stop most (if not all) energy projects. Talking with organized stakeholder groups provides some risk reduction from mutual learning, but organized groups tend not to change positions except under conditions of a negotiated settlement. Achieving a negotiated settlement may be impossible. Furthermore, opposition often arises outside pre-existing groups. Standard public polling provides some information but does not reveal underlying motivations, intensity of attitudes, etc. Improved methods are needed that probe deeper into stakeholder (organized groups and members of the public) values and beliefs (sometimes called /heuristics) to increase the potential for change of opinions and/or out-of-box solutions. The term heuristics refers to the mental short-cuts, underlying beliefs, and paradigms that everyone uses to filter and interpret information, to interpret what is around us, and to guide our actions and decisions. This document is the final report of a 3-year effort to test different public discourse methods in the subject area of energy policy decision-making. We analyzed 504 mail-in surveys and 80 participants in groups on the Boise State University campus for their preference, financial support, and evaluations of eight attributes for energy conservation and efficiency, fossil fuels, nuclear energy, hydropower, and renewable energy. All participants saw a 7-person diverse energy expert panel. Some participants attended deliberation sessions; some received a 35-page briefing document that included pros and cons of the different energy options.

  8. Modeling the Risk of Radiation-Induced Acute Esophagitis for Combined Washington University and RTOG Trial 93-11 Lung Cancer Patients

    SciTech Connect (OSTI)

    Huang, Ellen X.; Bradley, Jeffrey D.; El Naqa, Issam; Hope, Andrew J.; Lindsay, Patricia E.; Bosch, Walter R.; Matthews, John W.; Sause, William T.; Graham, Mary V.; Deasy, Joseph O.

    2012-04-01

    Purpose: To construct a maximally predictive model of the risk of severe acute esophagitis (AE) for patients who receive definitive radiation therapy (RT) for non-small-cell lung cancer. Methods and Materials: The dataset includes Washington University and RTOG 93-11 clinical trial data (events/patients: 120/374, WUSTL = 101/237, RTOG9311 = 19/137). Statistical model building was performed based on dosimetric and clinical parameters (patient age, sex, weight loss, pretreatment chemotherapy, concurrent chemotherapy, fraction size). A wide range of dose-volume parameters were extracted from dearchived treatment plans, including Dx, Vx, MOHx (mean of hottest x% volume), MOCx (mean of coldest x% volume), and gEUD (generalized equivalent uniform dose) values. Results: The most significant single parameters for predicting acute esophagitis (RTOG Grade 2 or greater) were MOH85, mean esophagus dose (MED), and V30. A superior-inferior weighted dose-center position was derived but not found to be significant. Fraction size was found to be significant on univariate logistic analysis (Spearman R = 0.421, p < 0.00001) but not multivariate logistic modeling. Cross-validation model building was used to determine that an optimal model size needed only two parameters (MOH85 and concurrent chemotherapy, robustly selected on bootstrap model-rebuilding). Mean esophagus dose (MED) is preferred instead of MOH85, as it gives nearly the same statistical performance and is easier to compute. AE risk is given as a logistic function of (0.0688 Asterisk-Operator MED+1.50 Asterisk-Operator ConChemo-3.13), where MED is in Gy and ConChemo is either 1 (yes) if concurrent chemotherapy was given, or 0 (no). This model correlates to the observed risk of AE with a Spearman coefficient of 0.629 (p < 0.000001). Conclusions: Multivariate statistical model building with cross-validation suggests that a two-variable logistic model based on mean dose and the use of concurrent chemotherapy robustly predicts acute esophagitis risk in combined-data WUSTL and RTOG 93-11 trial datasets.

  9. A SEARCH FOR THE HIGGS BOSON AND A SEARCH FOR DARK-MATTER PARTICLE WITH JETS AND MISSING TRANSVERSE ENERGY AT COLLIDER DETECTOR AT FERMILAB

    SciTech Connect (OSTI)

    Liu, Qiuguang

    2013-01-01

    Finding the standard model Higgs boson and discovering beyond-standard model physics phenomena have been the most important goals for the high-energy physics in the last decades. In this thesis, we present two such searches. First is the search for the low mass standard model Higgs boson produced in association with a vector boson; second is the rst search for a dark-matter candidate (D) produced in association with a top quark (t) in particle colliders. We search in events with energetic jets and large missing transverse energy { a signature characterized by complicated backgrounds { in data collected by the CDF detector with proton-antiproton collisions at p s = 1:96 TeV. We discuss the techniques that have been developed for background modeling, for discriminating signal from background, and for reducing background resulting from detector e ects. In the Higgs search, we report the 95% con dence level upper limits on the pro- duction cross section across masses of 90 to 150 GeV/c2. The expected limits are improved by an average of 14% relative to the previous analysis. The Large Hadron Collider experiments reported a Higgs-like particle with mass of 125 GeV/c2 by study- ing the data collected in year 2011/12. At a Higgs boson mass of 125 GeV/c2, our observed (expected) limit is 3.06 (3.33) times the standard model prediction, corre- sponding to one of the most sensitive searches to date in this nal state. In the dark matter search, we nd the data are consistent with the standard model prediction, thus set 95% con dence level upper limits on the cross section of the process p p ! t + D as a function of the mass of the dark-matter candidate. The xviii upper limits are approximately 0.5 pb for a dark-matter particle with masses in the range of 0 􀀀 150 GeV/c2.

  10. Public Discourse in Energy Policy Decision-Making: Final Report

    SciTech Connect (OSTI)

    Idaho Citizen; Eileen DeShazo; John Freemuth; Tina Giannini; Troy Hall; Ann Hunter; Jeffrey C. Joe; Michael Louis; Carole Nemnich; Jennie Newman; Steven J. Piet; Stephen Sorensen; Paulina Starkey; Kendelle Vogt; Patrick Wilson

    2010-08-01

    The ground is littered with projects that failed because of strong public opposition, including natural gas and coal power plants proposed in Idaho over the past several years. This joint project , of the Idaho National Laboratory, Boise State University, Idaho State University and University of Idaho has aimed to add to the tool box to reduce project risk through encouraging the public to engage in more critical thought and be more actively involved in public or social issues. Early in a project, project managers and decision-makers can talk with no one, pro and con stakeholder groups, or members of the public. Experience has shown that talking with no one outside of the project incurs high risk because opposition stakeholders have many means to stop most (if not all) energy projects. Talking with organized stakeholder groups provides some risk reduction from mutual learning, but organized groups tend not to change positions except under conditions of a negotiated settlement. Achieving a negotiated settlement may be impossible. Furthermore, opposition often arises outside pre-existing groups. Standard public polling provides some information but does not reveal underlying motivations, intensity of attitudes, etc. Improved methods are needed that probe deeper into stakeholder (organized groups and members of the public) values and beliefs/heuristics to increase the potential for change of opinions and/or out-of-box solutions. The term “heuristics” refers to the mental short-cuts, underlying beliefs, and paradigms that everyone uses to filter and interpret information, to interpret what is around us, and to guide our actions and decisions. This document is the final report of a 3-year effort to test different public discourse methods in the subject area of energy policy decision-making. We analyzed 504 mail-in surveys and 80 participants in groups on the Boise State University campus for their preference, financial support, and evaluations of eight attributes for energy conservation and efficiency, fossil fuels, nuclear energy, hydropower, and renewable energy. All participants saw a 7-person diverse energy expert panel. Some participants attended deliberation sessions; some received a 35-page briefing document that included pros and cons of the different energy options.

  11. Efficient Algorithms for Estimating the Absorption Spectrum within Linear Response TDDFT

    SciTech Connect (OSTI)

    Brabec, Jiri; Lin, Lin; Shao, Meiyue; Govind, Niranjan; Yang, Chao; Saad, Yousef; Ng, Esmond

    2015-10-06

    We present two iterative algorithms for approximating the absorption spectrum of molecules within linear response of time-dependent density functional theory (TDDFT) framework. These methods do not attempt to compute eigenvalues or eigenvectors of the linear response matrix. They are designed to approximate the absorption spectrum as a function directly. They take advantage of the special structure of the linear response matrix. Neither method requires the linear response matrix to be constructed explicitly. They only require a procedure that performs the multiplication of the linear response matrix with a vector. These methods can also be easily modified to efficiently estimate the density of states (DOS) of the linear response matrix without computing the eigenvalues of this matrix. We show by computational experiments that the methods proposed in this paper can be much more efficient than methods that are based on the exact diagonalization of the linear response matrix. We show that they can also be more efficient than real-time TDDFT simulations. We compare the pros and cons of these methods in terms of their accuracy as well as their computational and storage cost.

  12. NRC Reviewer Aid for Evaluating the Human Factors Engineering Aspects of Small Modular Reactors

    SciTech Connect (OSTI)

    OHara J. M.; Higgins, J.C.

    2012-01-13

    Small modular reactors (SMRs) are a promising approach to meeting future energy needs. Although the electrical output of an individual SMR is relatively small compared to that of typical commercial nuclear plants, they can be grouped to produce as much energy as a utility demands. Furthermore, SMRs can be used for other purposes, such as producing hydrogen and generating process heat. The design characteristics of many SMRs differ from those of current conventional plants and may require a distinct concept of operations (ConOps). The U.S. Nuclear Regulatory Commission (NRC) conducted research to examine the human factors engineering (HFE) and the operational aspects of SMRs. The research identified thirty potential human-performance issues that should be considered in the NRC's reviews of SMR designs and in future research activities. The purpose of this report is to support NRC HFE reviewers of SMR applications by identifying some of the questions that can be asked of applicants whose designs have characteristics identified in the issues. The questions for each issue were identified and organized based on the review elements and guidance contained in Chapter 18 of the Standard Review Plan (NUREG-0800), and the Human Factors Engineering Program Review Model (NUREG-0711).

  13. Extra-Territorial Siting of Nuclear Installations

    SciTech Connect (OSTI)

    Shea, Thomas E.; Morris, Frederic A.

    2009-10-07

    Arrangements might be created for siting nuclear installations on land ceded by a host State for administration by an international or multinational organization. Such arrangements might prove useful in terms of resolving suspicions of proliferation in troubled areas of the world, or as a means to introduce nuclear activities into areas where political, financial or technical capabilities might otherwise make such activities unsound, or as a means to enable global solutions to be instituted for major nuclear concerns (e.g., spent fuel management). The paper examines practical matters associated with the legal and programmatic aspects of siting nuclear installations, including diplomatic/political frameworks, engaging competent industrial bodies, protection against seizure, regulation to ensure safety and security, waste management, and conditions related to the dissolution of the extra-territorial provisions as may be agreed as the host State(s) achieve the capabilities to own and operate the installations. The paper considers the potential for using such a mechanism across the spectrum of nuclear power activities, from mining to geological repositories for nuclear waste. The paper considers the non-proliferation dimensions associated with such arrangements, and the pros and cons affecting potential host States, technology vendor States, regional neighbors and the international community. It considers in brief potential applications in several locations today.

  14. Report of a Workshop in Nuclear Forces and Nonproliferation held at the Woodrow Wilson International Center for Scholars, Washington, DC

    SciTech Connect (OSTI)

    Pilat, Joseph F

    2009-01-01

    The workshop addressed evolving nuclear forces and their impacts on nonproliferation in the context of the new strategic environment, the Obama Administration's Nuclear Posture Review (NPR) Review and the 2010 Conference (RevCon) of the Parties to the Treaty on the Non-Proliferation of Nuclear Weapons (NPT). The issues discussed are at the heart of the debate on nuclear policy issues such asfuture nuclear weapons requirements and nonproliferation, but also the stockpile stewardship program and infrastructure modernization. The workshop discussions reflected the importance of the NPRfor defining the role of US nuclear forces in dealing with 21s1 century threats and providing guidance that will shape NNSA and DoD programs. They also highlighted its importancefor NPT diplomacy. The discussion noted the report of the bipartisan Congressional Commission on the Strategic Posture of the United States, and the expectation that the NPR would likely reflect its consensus to a large degree (although the Administration was not bound by the report). There was widespread support for developing thefoundationsfor a sustainable nuclear-weapon program that addresses nuclear weapons, infrastructure and expertise in the broader nonproliferation, disarmament and international security contexts. The discussion also revealed a convergence of views, but no consensus, on a number of important issues, including the diminished role but continued importance of nuclear weapons; the need to take action to ensure the sustainability of the stockpile, and the recapitalization of the infrastructure and expertise; and the need to take action to promote nonproliferation, arms control and disarmament objectives.

  15. Synthesis and Rietveld refinement of the small-pore zeolite SSZ-16

    SciTech Connect (OSTI)

    Lobo, R.F.; Zones, S.I.; Medrud, R.C.

    1996-10-01

    Recent research efforts invested in the synthesis of new high-silica zeolites have yielded several novel materials with medium ({approximately}5.6 {Angstrom}) and large ({approximately}7.2 {Angstrom}) pores. Examples include new zeolites with intersecting 10 and 12 member rings-i.e., pores bounded by 10 and 12 tetrahedral (T) atoms respectively-like SSZ-26, NU-87, SSZ-37, SSZ-25, MCM-22, CIT-1 (CON), and the aluminophosphate-based DAF-1 (DFO). However, except for the zeolites SSZ-28 (DDR) and SSZ-13 (CHA), no new high-silica zeolites with small pores have been reported. High-silica small-pore zeolites could be potentially useful for several catalytic reactions including the synthesis of dimethylamine, the reduction of NO{sub x} from combustion gases and the dewaxing of fuels for octane upgrading. The authors present here the synthesis and structural characterization using Rietveld refinement of synchrotron X-ray powder diffraction data of the zeolite SSZ-16. 27 refs., 3 figs., 2 tabs.

  16. Motivation and Design of the Sirocco Storage System Version 1.0.

    SciTech Connect (OSTI)

    Curry, Matthew Leon; Ward, H. Lee; Danielson, Geoffrey Charles

    2015-07-01

    Sirocco is a massively parallel, high performance storage system for the exascale era. It emphasizes client-to-client coordination, low server-side coupling, and free data movement to improve resilience and performance. Its architecture is inspired by peer-to-peer and victim- cache architectures. By leveraging these ideas, Sirocco natively supports several media types, including RAM, flash, disk, and archival storage, with automatic migration between levels. Sirocco also includes storage interfaces and support that are more advanced than typical block storage. Sirocco enables clients to efficiently use key-value storage or block-based storage with the same interface. It also provides several levels of transactional data updates within a single storage command, including full ACID-compliant updates. This transaction support extends to updating several objects within a single transaction. Further support is provided for con- currency control, enabling greater performance for workloads while providing safe concurrent modification. By pioneering these and other technologies and techniques in the storage system, Sirocco is poised to fulfill a need for a massively scalable, write-optimized storage system for exascale systems. This is version 1.0 of a document reflecting the current and planned state of Sirocco. Further versions of this document will be accessible at http://www.cs.sandia.gov/Scalable_IO/ sirocco .

  17. INTERIM BARRIER AT HANFORDS TY FARM TO PROTECT GROUNDWATER AT THE HANFORD SITE WASHINGTON USA

    SciTech Connect (OSTI)

    PARKER DL; HOLM MJ; HENDERSON JC; LOBER RW

    2011-01-13

    An innovative interim surface barrier was constructed as a demonstration project at the Hanford Site's TY Tank Farm. The purpose of the demonstration barrier is to stop rainwater and snowmelt from entering the soils within the tank farm and driving contamination from past leaks and spills toward the ground water. The interim barrier was constructed using a modified asphalt material with very low permeability developed by MatCon{reg_sign}. Approximately 2,400 cubic yards of fill material were added to the tank farm to create a sloped surface that will gravity drain precipitation to collection points where it will be routed through buried drain lines to an evapotranspiration basin adjacent to the farm. The evapotranspiration basin is a lined basin with a network of perforated drain lines covered with soil and planted with native grasses. The evapotranspiration concept was selected because it prevents the runoff from percolating into the soil column and also avoids potential monitoring and maintenance issues associated with standing water in a traditional evaporation pond. Because of issues associated with using standard excavation and earth moving equipment in the farm a number of alternate construction approaches were utilized to perform excavations and prepare the site for the modified asphalt.

  18. High-resolution Tangential AXUV Arrays for Radiated Power Density Measurements on NSTX-U

    SciTech Connect (OSTI)

    Delgado-Aparicio, L; Bell, R E; Faust, I; Tritz, K; Diallo, A; Gerhardt, S P; Kozub, T A; LeBlanc, B P; Stratton, B C

    2014-07-01

    Precise measurements of the local radiated power density and total radiated power are a matter of the uttermost importance for understanding the onset of impurity-induced instabilities and the study of particle and heat transport. Accounting of power balance is also needed for the understanding the physics of various divertor con#12;gurations for present and future high-power fusion devices. Poloidal asymmetries in the impurity density can result from high Mach numbers and can impact the assessment of their flux-surface-average and hence vary the estimates of P[sub]rad (r, t) and (Z[sub]eff); the latter is used in the calculation of the neoclassical conductivity and the interpretation of non-inductive and inductive current fractions. To this end, the bolometric diagnostic in NSTX-U will be upgraded, enhancing the midplane coverage and radial resolution with two tangential views, and adding a new set of poloidally-viewing arrays to measure the 2D radiation distribution. These systems are designed to contribute to the near- and long-term highest priority research goals for NSTX-U which will integrate non-inductive operation at reduced collisionality, with high-pressure, long energy-confinement-times and a divertor solution with metal walls.

  19. Frequent Subgraph Discovery in Large Attributed Streaming Graphs

    SciTech Connect (OSTI)

    Ray, Abhik; Holder, Larry; Choudhury, Sutanay

    2014-08-13

    The problem of finding frequent subgraphs in large dynamic graphs has so far only consid- ered a dynamic graph as being represented by a series of static snapshots taken at various points in time. This representation of a dynamic graph does not lend itself well to real time processing of real world graphs like social networks or internet traffic which consist of a stream of nodes and edges. In this paper we propose an algorithm that discovers the frequent subgraphs present in a graph represented by a stream of labeled nodes and edges. Our algorithm is efficient and consists of tunable parameters that can be tuned by the user to get interesting patterns from various kinds of graph data. In our model updates to the graph arrive in the form of batches which contain new nodes and edges. Our algorithm con- tinuously reports the frequent subgraphs that are estimated to be found in the entire graph as each batch arrives. We evaluate our system using 5 large dynamic graph datasets: the Hetrec 2011 challenge data, Twitter, DBLP and two synthetic. We evaluate our approach against two popular large graph miners, i.e., SUBDUE and GERM. Our experimental re- sults show that we can find the same frequent subgraphs as a non-incremental approach applied to snapshot graphs, and in less time.

  20. METHOD OF CONDUCTING A PERSON BETWEEN A SAFE REGION AND A DANGEROUS REGION

    DOE Patents [OSTI]

    Moulthrop, H.A.

    1957-11-12

    This invention relates to a method for conducting a person between a safe region and a dangerous or con taminated region so that he may work in the dangerous region without risk to himself or the hinderance of an attached tube, and without danger of contaminating the safe region. A safely suit in which a person is to work is connected by a thermoplastic tube, turned partially inside out, to a hole in the wall separating the dangerous region. The tube is sealed by pressure and separated into two parts at the seal, whereupon the person in the suit may move around freely in the dangerous area. When the person desires to exit the dangerous region, the parts of the tube are resealed, removing a portion of the tube at the seal, and the person leaves the hole whcre he entered, seals the tube to close the hole, and cuts his suit free from the tube. Bands of masking tape inside and outside of the tube at predetermined points simplify the pressure sealing of the tube at the desired points. This patent provides a simple, safe and economical method of freely working in a dangerous region.

  1. Best Practices for Wind Energy Development in the Great Lakes Region

    SciTech Connect (OSTI)

    Pebbles, Victoria; Hummer, John; Haven, Celia

    2011-07-19

    This report offers a menu of 18 different, yet complementary, preferred practices and policies. The best practices cover all phases of the wind energy development process - from the policies that allow for wind development, to the sustainable operation of a wind project, to the best practices for decommissioning a spent turbine - including applications for offshore wind. Each best practice describes the opportunities and challenges (pros and cons), and offers a case example that illustrates how that best practice is being utilized by a particular jurisdiction or wind project. The practices described in this publication were selected by a diverse group of interests from the Great Lakes Wind Collaborative that included environmental groups, industry, academia, and federal, state and local government regulators. The practices were identified through a year-long process that included a literature review, online survey and interviews with individuals from the public, private and non-profit sectors. Optimally, a suite of these best practices would be applied in an appropriate combination to fit the conditions of a particular wind project or a set of wind projects within a given locality or region.

  2. Best Practices for Sustainable WInd Energy Development in the Great Lakes Region and Beyond

    SciTech Connect (OSTI)

    Great Lakes Commission; Victoria Pebbles; John Hummer; Celia Haven

    2011-07-19

    This document offers a menu of 18 different, yet complimentary preferred practices and policies. The best practices cover all phases of the wind energy development process - from the policies that allow for wind development, to the sustainable operation of a wind project, to the best practices for decommissioning a spent turbine - including applications for offshore wind. The practices include those that have been previously tested and proven effective, as well as new practices that were identified by experts in the field as needed for future wind developments. Each best practice includes information about the opportunities and challenges (pros and cons), and offers a case example that illustrates how that best practice is being utilized by a particular jurisdiction or wind project. The practices described in this publication were selected by a diverse group of interests from the Great Lakes Wind Collaborative that included environmental groups, industry, and federal, state and local government regulators. They were identified through a year long process that included a literature review, online survey and interviews with individuals from the public, private and non-profit sectors.

  3. An Examination of Avoided Costs in Utah

    SciTech Connect (OSTI)

    Bolinger, Mark; Wiser, Ryan

    2005-01-07

    The Utah Wind Working Group (UWWG) believes there are currently opportunities to encourage wind power development in the state by seeking changes to the avoided cost tariff paid to qualifying facilities (QFs). These opportunities have arisen as a result of a recent renegotiation of Pacificorp's Schedule 37 tariff for wind QFs under 3 MW, as well as an ongoing examination of Pacificorp's Schedule 38 tariff for wind QFs larger than 3 MW. It is expected that decisions made regarding Schedule 38 will also impact Schedule 37. Through the Laboratory Technical Assistance Program (Lab TAP), the UWWG has requested (through the Utah Energy Office) that LBNL provide technical assistance in determining whether an alternative method of calculating avoided costs that has been officially adopted in Idaho would lead to higher QF payments in Utah, and to discuss the pros and cons of this method relative to the methodology recently adopted under Schedule 37 in Utah. To accomplish this scope of work, I begin by summarizing the current method of calculating avoided costs in Utah (per Schedule 37) and Idaho (the ''surrogate avoided resource'' or SAR method). I then compare the two methods both qualitatively and quantitatively. Next I present Pacificorp's four main objections to the use of the SAR method, and discuss the reasonableness of each objection. Finally, I conclude with a few other potential considerations that might add value to wind QFs in Utah.

  4. Open Automated Demand Response for Small Commerical Buildings

    SciTech Connect (OSTI)

    Dudley, June Han; Piette, Mary Ann; Koch, Ed; Hennage, Dan

    2009-05-01

    This report characterizes small commercial buildings by market segments, systems and end-uses; develops a framework for identifying demand response (DR) enabling technologies and communication means; and reports on the design and development of a low-cost OpenADR enabling technology that delivers demand reductions as a percentage of the total predicted building peak electric demand. The results show that small offices, restaurants and retail buildings are the major contributors making up over one third of the small commercial peak demand. The majority of the small commercial buildings in California are located in southern inland areas and the central valley. Single-zone packaged units with manual and programmable thermostat controls make up the majority of heating ventilation and air conditioning (HVAC) systems for small commercial buildings with less than 200 kW peak electric demand. Fluorescent tubes with magnetic ballast and manual controls dominate this customer group's lighting systems. There are various ways, each with its pros and cons for a particular application, to communicate with these systems and three methods to enable automated DR in small commercial buildings using the Open Automated Demand Response (or OpenADR) communications infrastructure. Development of DR strategies must consider building characteristics, such as weather sensitivity and load variability, as well as system design (i.e. under-sizing, under-lighting, over-sizing, etc). Finally, field tests show that requesting demand reductions as a percentage of the total building predicted peak electric demand is feasible using the OpenADR infrastructure.

  5. FY2008 Report on GADRAS Radiation Transport Methods.

    SciTech Connect (OSTI)

    Mattingly, John K.; Mitchell, Dean James; Harding, Lee; Varley, Eric S.; Hilton, Nathan R.

    2008-10-01

    The primary function of the Gamma Detector Response and Analysis Software (GADRAS) is the solution of inverse radiation transport problems, by which the con-figuration of an unknown radiation source is inferred from one or more measured radia-tion signatures. GADRAS was originally developed for the analysis of gamma spec-trometry measurements. During fiscal years 2007 and 2008, GADRAS was augmented to implement the simultaneous analysis of neutron multiplicity measurements. This report describes the radiation transport methods developed to implement this new capability. This work was performed at the direction of the National Nuclear Security Administration's Office of Nonproliferation Research and Development. It was executed as an element of the Proliferation Detection Program's Simulation, Algorithm, and Modeling element. Acronyms BNL Brookhaven National Laboratory CSD Continuous Slowing-Down DU depleted uranium ENSDF Evaluated Nuclear Structure Data Files GADRAS Gamma Detector Response and Analysis Software HEU highly enriched uranium LANL Los Alamos National Laboratory LLNL Lawrence Livermore National Laboratory NA-22 Office of Nonproliferation Research and Development NNDC National Nuclear Data Center NNSA National Nuclear Security Administration ODE ordinary differential equation ONEDANT One-dimensional diffusion accelerated neutral particle transport ORNL Oak Ridge National Laboratory PARTISN Parallel time-dependent SN PDP Proliferation Detection Program RADSAT Radiation Scenario Analysis Toolkit RSICC Radiation Safety Information Computational Center SAM Simulation, Algorithms, and Modeling SNL Sandia National Laboratories SNM special nuclear material ToRI Table of Radioactive Isotopes URI uniform resource identifier XML Extensible Markup Language

  6. Deadline near for compliance with U. S. oil spill liability rules

    SciTech Connect (OSTI)

    Not Available

    1994-08-01

    The petroleum industry is keeping a close watch on the approaching deadline for compliance with tough new US rules on fiscal liability for oil spills. Interim final rules scheduled to go into effect Dec. 28 stem from the Oil Pollution Act of 1990 (OPA90). The designation of interim final'' rules leaves room for final adjustments on narrow issues. But in general, the rule swill stand as presently structured. OPA90 imposes liability for oil discharges from US and non-US flagged tankers, as well as ports, terminals, and offshore pipelines and other facilities. Tanker operators have voiced the most vigorous opposition to OPA90 because it could expose them to unlimited liability for damage caused by spills and will impose a phaseout on single hull tankers plying US waters. Scheduled to replace such takers are double hull vessels that carry a much bigger price tag. The paper describes provisions of OPA90, the current situation related to insurance coverage, pro and cons to the new rule, cost issues, oil firms, views, new insurers, and the mandatory excess insurance facility proposal.

  7. Scaling to Nanotechnology Limits with the PIMS Computer Architecture and a new Scaling Rule.

    SciTech Connect (OSTI)

    Debenedictis, Erik

    2015-02-01

    We describe a new approach to computing that moves towards the limits of nanotechnology using a newly formulated sc aling rule. This is in contrast to the current computer industry scali ng away from von Neumann's original computer at the rate of Moore's Law. We extend Moore's Law to 3D, which l eads generally to architectures that integrate logic and memory. To keep pow er dissipation cons tant through a 2D surface of the 3D structure requires using adiabatic principles. We call our newly proposed architecture Processor In Memory and Storage (PIMS). We propose a new computational model that integrates processing and memory into "tiles" that comprise logic, memory/storage, and communications functions. Since the programming model will be relatively stable as a system scales, programs repr esented by tiles could be executed in a PIMS system built with today's technology or could become the "schematic diagram" for implementation in an ultimate 3D nanotechnology of the future. We build a systems software approach that offers advantages over and above the technological and arch itectural advantages. Firs t, the algorithms may be more efficient in the conventional sens e of having fewer steps. Second, the algorithms may run with higher power efficiency per operation by being a better match for the adiabatic scaling ru le. The performance analysis based on demonstrated ideas in physical science suggests 80,000 x improvement in cost per operation for the (arguably) gene ral purpose function of emulating neurons in Deep Learning.

  8. Dwarf spheroidal galaxies as degenerate gas of free fermions

    SciTech Connect (OSTI)

    Domcke, Valerie; Urbano, Alfredo E-mail: alfredo.urbano@sissa.it

    2015-01-01

    In this paper we analyze a simple scenario in which Dark Matter (DM) consists of free fermions with mass m{sub f}. We assume that on galactic scales these fermions are capable of forming a degenerate Fermi gas, in which stability against gravitational collapse is ensured by the Pauli exclusion principle. The mass density of the resulting con figuration is governed by a non-relativistic Lane-Emden equation, thus leading to a universal cored profile that depends only on one free parameter in addition to m{sub f}. After reviewing the basic formalism, we test this scenario against experimental data describing the velocity dispersion of the eight classical dwarf spheroidal galaxies of the Milky Way. We find that, despite its extreme simplicity, the model exhibits a good fit to the data and realistic predictions for the size of DM halos providing that m{sub f}?200 eV. Furthermore, we show that in this setup larger galaxies correspond to the non-degenerate limit of the gas. We propose a concrete realization of this model in which DM is produced non-thermally via inflaton decay. We show that imposing the correct relic abundance and the bound on the free-streaming length constrains the inflation model in terms of inflaton mass, its branching ratio into DM and the reheating temperature.

  9. Deuterium-Tritium Simulations of the Enhanced Reversed Shear Mode in the Tokamak Fusion Test Reactor

    SciTech Connect (OSTI)

    Mikkelsen, D.R.; Manickam, J.; Scott, S.D.; Zarnstorff

    1997-04-01

    The potential performance, in deuterium-tritium plasmas, of a new enhanced con nement regime with reversed magnetic shear (ERS mode) is assessed. The equilibrium conditions for an ERS mode plasma are estimated by solving the plasma transport equations using the thermal and particle dif- fusivities measured in a short duration ERS mode discharge in the Tokamak Fusion Test Reactor [F. M. Levinton, et al., Phys. Rev. Letters, 75, 4417, (1995)]. The plasma performance depends strongly on Zeff and neutral beam penetration to the core. The steady state projections typically have a central electron density of {approx}2:5x10 20 m{sup -3} and nearly equal central electron and ion temperatures of {approx}10 keV. In time dependent simulations the peak fusion power, {approx} 25 MW, is twice the steady state level. Peak performance occurs during the density rise when the central ion temperature is close to the optimal value of {approx} 15 keV. The simulated pressure profiles can be stable to ideal MHD instabilities with toroidal mode number n = 1, 2, 3, 4 and {infinity} for {beta}{sub norm} up to 2.5; the simulations have {beta}{sub norm} {le} 2.1. The enhanced reversed shear mode may thus provide an opportunity to conduct alpha physics experiments in conditions imilar to those proposed for advanced tokamak reactors.

  10. Glass-based confined structures enabling light control

    SciTech Connect (OSTI)

    Chiappini, Andrea; Normani, Simone; Chiasera, Alessandro; Vasilchenko, Iustyna; Ristic, Davor; Boulard, Brigitte; Dorosz, Dominik; Scotognella, Francesco; Vaccari, Alessandro; Taccheo, Stefano; Pelli, Stefano; Righini, Giancarlo C.; Conti, Gualtiero Nunzi; Ramponi, Roberta; and others

    2015-04-24

    When a luminescent ion is confined in a system characterized by one or more specific properties such as spatial size, geometrical dimension and shape, refractive index, local crystal field, cut-off vibrational energy and so on, it's possible to control its emission. The control of branching ratios as a function of the composition, the luminescence enhancement induced by a photonic crystal, or the laser action in a microresonator, are well known examples of light control. Photonic glass-based structures are extremely viable systems to exploit the above mentioned properties and in our research team we have successfully fabricated luminescent photonic structures by different techniques, including sol-gel, rf sputtering, drawing, melting, and physical vapour deposition. Here we will discuss some of them with the aim to make the reader aware of the chemical-physical properties related to each specific system. We will demonstrate that glass ceramic waveguides in some cases present superior spectroscopic properties in respect to the parent glass, that compositional properties can play a positive role in reducing luminescence quenching and in developing novel planar waveguides and fibers, that colloids allow to obtain high internal quantum efficiency and that photonic crystals, microcavities and microresonators can enable the handling of the rare earth luminescence. Finally, the pros and cons of the systems and of the different techniques employed for their fabrication will be discussed and some perspectives concerning the glass photonics will be proposed looking at both possible applications and investigation of physical properties.

  11. Laboratory Testing of Bulk Vitrified Low-Activity Waste Forms to Support the 2005 Integrated Disposal Facility Performance Assessment

    SciTech Connect (OSTI)

    Pierce, Eric M.; McGrail, B. Peter; Bagaasen, Larry M.; Rodriguez, Elsa A.; Wellman, Dawn M.; Geiszler, Keith N.; Baum, Steven R.; Reed, Lunde R.; Crum, Jarrod V.; Schaef, Herbert T.

    2006-06-30

    The purpose of this report is to document the results from laboratory testing of the bulk vitri-fied (BV) waste form that was conducted in support of the 2005 integrated disposal facility (IDF) performance assessment (PA). Laboratory testing provides a majority of the key input data re-quired to assess the long-term performance of the BV waste package with the STORM code. Test data from three principal methods, as described by McGrail et al. (2000a; 2003a), are dis-cussed in this testing report including the single-pass flow-through test (SPFT) and product con-sistency test (PCT). Each of these test methods focuses on different aspects of the glass corrosion process. See McGrail et al. (2000a; 2003a) for additional details regarding these test methods and their use in evaluating long-term glass performance. In addition to evaluating the long-term glass performance, this report discusses the results and methods used to provided a recommended best estimate of the soluble fraction of 99Tc that can be leached from the engineer-ing-scale BV waste package. These laboratory tests are part of a continuum of testing that is aimed at improving the performance of the BV waste package.

  12. Laboratory Testing of Bulk Vitrified Low-Activity Waste Forms to Support the 2005 Integrated Disposal Facility Performance Assessment

    SciTech Connect (OSTI)

    Pierce, Eric M.; McGrail, B. Peter; Bagaasen, Larry M.; Rodriguez, Elsa A.; Wellman, Dawn M.; Geiszler, Keith N.; Baum, Steven R.; Reed, Lunde R.; Crum, Jarrod V.; Schaef, Herbert T.

    2005-03-31

    The purpose of this report is to document the results from laboratory testing of the bulk vitri-fied (BV) waste form that was conducted in support of the 2005 integrated disposal facility (IDF) performance assessment (PA). Laboratory testing provides a majority of the key input data re-quired to assess the long-term performance of the BV waste package with the STORM code. Test data from three principal methods, as described by McGrail et al. (2000a; 2003a), are dis-cussed in this testing report including the single-pass flow-through test (SPFT) and product con-sistency test (PCT). Each of these test methods focuses on different aspects of the glass corrosion process. See McGrail et al. (2000a; 2003a) for additional details regarding these test methods and their use in evaluating long-term glass performance. In addition to evaluating the long-term glass performance, this report discusses the results and methods used to provided a recommended best estimate of the soluble fraction of 99Tc that can be leached from the engineer-ing-scale BV waste package. These laboratory tests are part of a continuum of testing that is aimed at improving the performance of the BV waste package.

  13. Report of a workshop on nuclear forces and nonproliferation Woodrow Wilson international center for scholars, Washington, DC October 28, 2010

    SciTech Connect (OSTI)

    Pilat, Joseph F

    2010-12-08

    A workshop sponsored by the Los Alamos National Laboratory in cooperation with the Woodrow Wilson International Center for Scholars was held at the Wilson Center in Washington, DC, on October 28, 2010. The workshop addressed evolving nuclear forces and their impacts on nonproliferation in the context of the new strategic environment, the Obama Administration's Nuclear Posture Review and the 2010 NPT Review Conference. The discussions reflected the importance of the NPR for defining the role of US nuclear forces in dealing with 21st century threats and providing guidance for National Nuclear Security Administration (NNSA) and Department of Defense (DoD) programs and, for many but not all participants, highlighted its role in the successful outcome of the NPT RevCon. There was widespread support for the NPR and its role in developing the foundations for a sustainable nuclear-weapon program that addresses nuclear weapons, infrastructure and expertise in the broader nonproliferation, disarmament and international security contexts. However, some participants raised concerns about its implementation and its long-term effectiveness and sustainability.

  14. Complete genome sequence of the facultatively chemolithoautotrophic and methylotrophic alpha Proteobacterium Starkeya novella type strain (ATCC 8093T)

    SciTech Connect (OSTI)

    Kappler, Ulrike; Davenport, Karen W.; Beatson, Scott; Lucas, Susan; Lapidus, Alla L.; Copeland, A; Berry, Kerrie W.; Glavina Del Rio, Tijana; Hammon, Nancy; Dalin, Eileen; Tice, Hope; Pitluck, Sam; Richardson, P M; Bruce, David; Goodwin, Lynne A.; Han, Cliff; Tapia, Roxanne; Detter, J. Chris; Chang, Yun-Juan; Jeffries, Cynthia; Land, Miriam L; Hauser, Loren John; Kyrpides, Nikos C; Goker, Markus; Ivanova, N; Klenk, Hans-Peter; Woyke, Tanja

    2012-01-01

    Starkeya novella (Starkey 1934) Kelly et al. 2000 is a member of the family Xanthobacteraceae in the order Rhizobiales , which is thus far poorly characterized at the genome level. Cultures from this spe- cies are most interesting due to their facultatively chemolithoautotrophic lifestyle, which allows them to both consume carbon dioxide and to produce it. This feature makes S. novella an interesting model or- ganism for studying the genomic basis of regulatory networks required for the switch between con- sumption and production of carbon dioxide, a key component of the global carbon cycle. In addition, S. novella is of interest for its ability to grow on various inorganic sulfur compounds and several C1- compounds such as methanol. Besides Azorhizobium caulinodans, S. novella is only the second spe- cies in the family Xanthobacteraceae with a completely sequenced genome of a type strain. The cur- rent taxonomic classification of this group is in significant conflict with the 16S rRNA data. The ge- nomic data indicate that the physiological capabilities of the organism might have been underestimat- ed. The 4,765,023 bp long chromosome with its 4,511 protein-coding and 52 RNA genes was se- quenced as part of the DOE Joint Genome Institute Community Sequencing Program (CSP) 2008.

  15. Making Homes Part of the Climate Solution: Policy Options To Promote Energy Efficiency

    SciTech Connect (OSTI)

    Brown, Dr. Marilyn Ann; Chandler, Jess; Lapsa, Melissa Voss; Ally, Moonis

    2009-06-01

    In the area of energy efficiency, advanced technologies combined with best practices appear to afford not only large, but also cost-effective options to conserve energy and reduce greenhouse gas emissions (McKinsey & Company, 2007). In practice, however, the realization of this potential has often proven difficult. Progress appears to require large numbers of individuals to act knowledgeably, and each individual must often act with enabling assistance from others. Even when consumer education is effective and social norms are supportive, the actions of individuals and businesses can be impeded by a broad range of barriers, many of which are non-technical in nature. Title XVI of the Energy Policy Act of 2005 included a mandate to examine barriers to progress and make recommendations in this regard. A detailed report on barriers as well as the National strategy for overcoming barriers met this requirement (Brown et al, 2008; CCCSTI, 2009). Following up on this mandate, the U.S. Climate Change Technology Program (CCTP) chose to focus next on the development of policy options to improve energy efficiency in residential buildings, with supporting analysis of pros and cons, informed in part by behavioral research. While this work is sponsored by CCTP, it has been undertaken in coordination with DOE's Building Technologies Program and Office of Electricity Delivery and Energy Reliability.

  16. Draft Function Allocation Framework and Preliminary Technical Basis for Advanced SMR Concepts of Operations

    SciTech Connect (OSTI)

    Jacques Hugo; John Forester; David Gertman; Jeffrey Joe; Heather Medema; Julius Persensky; April Whaley

    2013-04-01

    This report presents preliminary research results from the investigation in to the development of new models and guidance for concepts of operations (ConOps) in advanced small modular reactor (aSMR) designs. In support of this objective, three important research areas were included: operating principles of multi-modular plants, functional allocation models and strategies that would affect the development of new, non-traditional concept of operations, and the requiremetns for human performance, based upon work domain analysis and current regulatory requirements. As part of the approach for this report, we outline potential functions, including the theoretical and operational foundations for the development of a new functional allocation model and the identification of specific regulatory requirements that will influence the development of future concept of operations. The report also highlights changes in research strategy prompted by confirmationof the importance of applying the work domain analysis methodology to a reference aSMR design. It is described how this methodology will enrich the findings from this phase of the project in the subsequent phases and help in identification of metrics and focused studies for the determination of human performance criteria that can be used to support the design process.

  17. Fossil plant self assessment

    SciTech Connect (OSTI)

    Bozgo, R.H.; Maguire, B.A.

    1996-07-01

    The increasingly competitive environment of the electric utility business is focusing utilities attention on reducing the cost of electricity generation. By using benchmark indicators, gains are being sought in plant material condition with corresponding improvements in operating efficiency and capacity factor as well as reductions in Operating and Maintenance (O&M) costs. In designing a process for improvement, Consolidated Edison Company of New York, Inc. (Con Edison) plant managers were asked to review and approve objectives and criteria for Fossil Plant Operations. The program methods included optimizing work processes (including material condition, maintenance programs, work control systems, and personnel performance); team building techniques to foster personnel buy-in of the process; and long term cultural change to insure an ongoing continuous improvement process with measurable results. The program begins with a self assessment of each plant based upon the approved Objectives and Criteria. The Criteria and Review Approaches (CRAs) are established by senior management and the review team. The criteria cover Management, Operations, Maintenance, and Support Functions including Technical Support, Training and Qualification, Environmental Compliance, Chemistry, and Safety and Emergency Preparedness. The Assessment is followed by a review of corrective action plans and an interim corrective action review. Annual Assessments are planned to ensure continuous improvement. Emphasis is placed on progress made in maintenance at the fossil stations.

  18. Progress in Fast, Accurate Multi-scale Climate Simulations

    SciTech Connect (OSTI)

    Collins, William D; Johansen, Hans; Evans, Katherine J; Woodward, Carol S.; Caldwell, Peter

    2015-01-01

    We present a survey of physical and computational techniques that have the potential to con- tribute to the next generation of high-fidelity, multi-scale climate simulations. Examples of the climate science problems that can be investigated with more depth include the capture of remote forcings of localized hydrological extreme events, an accurate representation of cloud features over a range of spatial and temporal scales, and parallel, large ensembles of simulations to more effectively explore model sensitivities and uncertainties. Numerical techniques, such as adaptive mesh refinement, implicit time integration, and separate treatment of fast physical time scales are enabling improved accuracy and fidelity in simulation of dynamics and allow more complete representations of climate features at the global scale. At the same time, part- nerships with computer science teams have focused on taking advantage of evolving computer architectures, such as many-core processors and GPUs, so that these approaches which were previously considered prohibitively costly have become both more efficient and scalable. In combination, progress in these three critical areas is poised to transform climate modeling in the coming decades.

  19. Promises and Challenges of Thorium Implementation for Transuranic Transmutation - 13550

    SciTech Connect (OSTI)

    Franceschini, F.; Lahoda, E.; Wenner, M.; Lindley, B.; Fiorina, C.; Phillips, C.

    2013-07-01

    This paper focuses on the challenges of implementing a thorium fuel cycle for recycle and transmutation of long-lived actinide components from used nuclear fuel. A multi-stage reactor system is proposed; the first stage consists of current UO{sub 2} once-through LWRs supplying transuranic isotopes that are continuously recycled and burned in second stage reactors in either a uranium (U) or thorium (Th) carrier. The second stage reactors considered for the analysis are Reduced Moderation Pressurized Water Reactors (RMPWRs), reconfigured from current PWR core designs, and Fast Reactors (FRs) with a burner core design. While both RMPWRs and FRs can in principle be employed, each reactor and associated technology has pros and cons. FRs have unmatched flexibility and transmutation efficiency. RMPWRs have higher fuel manufacturing and reprocessing requirements, but may represent a cheaper solution and the opportunity for a shorter time to licensing and deployment. All options require substantial developments in manufacturing, due to the high radiation field, and reprocessing, due to the very high actinide recovery ratio to elicit the claimed radiotoxicity reduction. Th reduces the number of transmutation reactors, and is required to enable a viable RMPWR design, but presents additional challenges on manufacturing and reprocessing. The tradeoff between the various options does not make the choice obvious. Moreover, without an overarching supporting policy in place, the costly and challenging technologies required inherently discourage industrialization of any transmutation scheme, regardless of the adoption of U or Th. (authors)

  20. Assessment of the 60 km rapid update cycle (RUC) with near real-time aircraft reports. Project report

    SciTech Connect (OSTI)

    Cole, R.E.; Richard, C.; Kim, S.; Bailey, D.

    1998-07-15

    The National Aeronautics and Space Administration (NASA) is developing the Center-TRA-CON Advisory System (CTAS), a set of Air Traffic Management (ATM) Decision Support Tools (DST) for en route (Center) and terminal (TRACON) airspace designed to enable controllers to increase capacity and flight efficiency. A crucial component of the CTAS, or any ATM DST, is the computation of the time-of-flight of aircraft along flight path segments. Earlier NASA studies show that accurate knowledge of the wind through which the aircraft are flying is required to estimate time-of-flight accurately. There are current envisioned to be two sources of wind data for CTAS: The Rapid Update Cycle (RUC) for the Center airspace, a numerical model developed by the National Oceanic and Atmospheric Administration (NOAA) Forecast System Laboratory (FSL) and run operationally by the National Weather Service (NWS) National Center for Environmental Prediction (NCEP); and The Integrated Terminal Weather System (ITWS) Terminal Winds (TW) for the TRACON airspace, developed at MIT Lincoln Laboratory under funding from the Federal Aviation Administration (FAA). This study has three goals: (1) determine the errors in the baseline 60 km resolution RUC forecast wind fields relative to the needs of en route DSTs such as CTAS, (2) determine the benefit of using the TW algorithm to refine the RUC forecast wind fields with near real-time Meteorological Data Collection and Reporting System (MDCRS) reports, and (3) identify factors that influence wind errors in order to improve accuracy and estimate errors in real time.

  1. Generalized multiscale finite-element method (GMsFEM) for elastic wave propagation in heterogeneous, anisotropic media

    SciTech Connect (OSTI)

    Gao, Kai; Fu, Shubin; Gibson, Richard L.; Chung, Eric T.; Efendiev, Yalchin

    2015-04-14

    It is important to develop fast yet accurate numerical methods for seismic wave propagation to characterize complex geological structures and oil and gas reservoirs. However, the computational cost of conventional numerical modeling methods, such as finite-difference method and finite-element method, becomes prohibitively expensive when applied to very large models. We propose a Generalized Multiscale Finite-Element Method (GMsFEM) for elastic wave propagation in heterogeneous, anisotropic media, where we construct basis functions from multiple local problems for both the boundaries and interior of a coarse node support or coarse element. The application of multiscale basis functions can capture the fine scale medium property variations, and allows us to greatly reduce the degrees of freedom that are required to implement the modeling compared with conventional finite-element method for wave equation, while restricting the error to low values. We formulate the continuous Galerkin and discontinuous Galerkin formulation of the multiscale method, both of which have pros and cons. Applications of the multiscale method to three heterogeneous models show that our multiscale method can effectively model the elastic wave propagation in anisotropic media with a significant reduction in the degrees of freedom in the modeling system.

  2. Information Foraging in Nuclear Power Plant Control Rooms

    SciTech Connect (OSTI)

    R.L. Boring

    2011-09-01

    nformation foraging theory articulates the role of the human as an 'informavore' that seeks information and follows optimal foraging strategies (i.e., the 'information scent') to find meaningful information. This paper briefly reviews the findings from information foraging theory outside the nuclear domain and then discusses the types of information foraging strategies operators employ for normal and off-normal operations in the control room. For example, operators may employ a predatory 'wolf' strategy of hunting for information in the face of a plant upset. However, during routine operations, the operators may employ a trapping 'spider' strategy of waiting for relevant indicators to appear. This delineation corresponds to information pull and push strategies, respectively. No studies have been conducted to determine explicitly the characteristics of a control room interface that is optimized for both push and pull information foraging strategies, nor has there been empirical work to validate operator performance when transitioning between push and pull strategies. This paper explores examples of control room operators as wolves vs. spiders and con- cludes by proposing a set of research questions to investigate information foraging in control room settings.

  3. PERFORMANCE OF RC AND FRC WALL PANELS REINFORCED WITH MILD STEEL AND GFRP COMPOSITES IN BLAST EVENTS

    SciTech Connect (OSTI)

    Timothy Garfield; William D. Richins; Thomas K. Larson; Chris P. Pantelides; James E. Blakeley

    2011-06-01

    The structural integrity of reinforced concrete structures in blast events is important for critical facilities. This paper presents experimental data generated for calibrating detailed finite element models that predict the performance of reinforced concrete wall panels with a wide range of construction details under blast loading. The test specimens were 1.2 m square wall panels constructed using Normal Weight Concrete (NWC) or Fiber Reinforced Concrete (FRC). FRC consists of macro-synthetic fibers dispersed in NWC. Five types of panels were tested: NWC panels with steel bar reinforcement (Type A); FRC panels without additional reinforcement (Type B); FRC panels with steel bar reinforcement (Type C); NWC panels with glass fiber reinforced polymer (GFRP) bar reinforcement (Type D); and NWC panels reinforced with steel bar reinforcement and external bidirectional GFRP overlays on both faces (Type E). An additional three Type C panels were used as control specimens (CON). Each panel type was constructed with three thicknesses: 152 mm, 254 mm, and 356 mm. The panels were instrumented with strain gauges, and accelerometers; in addition, pressure sensors and high speed videos were employed during the blast events. Panel types C and E had the best performance, whereas panel type B did not perform well. Preliminary dynamic simulations show crack patterns similar to the experimental results.

  4. Steel catenary risers for semisubmersible based floating production systems

    SciTech Connect (OSTI)

    Hays, P.R.

    1996-12-31

    The DeepStar production riser committee has investigated the feasibility of using steel catenary risers (SCRs) in water depths of 3,000--6,000 ft. Using Sonat`s George Richardson as the base semisubmersible, DeepStar has examined both extreme event response and fatigue life of an SCR made of pipe sections welded end-to-end. Concepts using alternative materials were investigated. This included steel, steel with titanium and titanium catenary risers. The pros and cons of frequency domain versus time domain analysis were investigated with a commercially available analysis package. A second study outlined a definitive analysis procedure which optimized the analysis time requirements. Analyses showed that steel catenary risers are feasible for semisubmersible based floating production systems. For the DeepStar Gulf of Mexico design criteria, alternative materials are not required. The greatest fatigue damage occurs in the touchdown region of the riser. Mild sea states contribute most to fatigue damage near riser touchdown. Wave drift and wind forces provide a significant contribution to touchdown area fatigue damage. Estimated fatigue lives are unacceptable. Although the rotations of the upper end of the riser are large relative to an SCR attached to a TLP, the rotation required can probably be accommodated with existing technology. For the case of product export, steel catenary risers provide very cost effective and readily installable deep water riser alternatives.

  5. High-volume, high-value usage of Flue Gas Desulfurization (FGD) by-products in underground mines Phase 1: Laboratory investigations. Quarterly report, July 1994--September 1994

    SciTech Connect (OSTI)

    1994-12-01

    During the quarter a second series of samples were collected and partially characterized chemically and mineralogically. The samples were collected at the disposal site operated by Freeman United Coal Co. The second collection was necessary because of deterioration due to hydration of the original samples. A study of the hydration characteristics was completed during the quarter. Important reactions included the immediate formation of ettringite and portlandite. The hydration and transformation was found to be a slow process. A second phase of gypsum formation from ettringite deterioration was identified. The slow hydration of anhydrite with its resultant swell is a potential problem which will be addressed further. Geotechnical characterization, during the quarter included completion of the preliminary characterization, analysis of the findings, experimentation with sample preparation for the final characterization/mix design, and design of the final experimental program. The analysis of the coals collected during the core drilling and hydrologic planning were completed. Also during the quarter a meeting was held with representatives of the shotcrete industry to discuss transport systems for emplacement. The pros and cons of pneumatic and hydraulic systems were discussed and plans formulated for further investigations.

  6. Intelligent pigging: Policy, recent experience and needs of a petroleum operator

    SciTech Connect (OSTI)

    Roche, M.; Bonis, M.; Tobiassen, P.; MacLeod, D.; Pedersen, A.E.

    1996-08-01

    On-line inspection of pipelines using intelligent pigs constitutes a major aspect of corrosion control programs. The policy established by a petroleum operator is presented. It defines when base-line and early inspection surveys are considered necessary. The paper discusses the pros and cons of intelligent pigging operations and gives guidelines for deciding when to run in-service inspections to assess the condition of a pipeline and to verify the efficiency of corrosion control measures on a long term basis. It highlights factors like the estimated maximum corrosion rate, the positive change of actual corrosion allowance with time and the detection limits by the selected intelligent pigs. In the second part, a recent experience concerning the base-line survey of the Lille-Frigg 10 inch wet gas production pipeline in the North Sea using an ultrasonic pig is presented. The inlet of this pipeline is situated at a subsea manifold. The third part of the paper discusses aspects of intelligent pigging where difficulties are found and where improvements or new technological developments are needed.

  7. The New Hampshire retail competition pilot program and the role of green marketing

    SciTech Connect (OSTI)

    Holt, E.A.; Fang, J.M.

    1997-11-01

    Most states in the US are involved in electric industry restructuring, from considering the pros and cons in regulatory dockets to implementing legislative mandates for full restructuring and retail access for all consumers. Several states and utilities have initiated pilot programs in which multiple suppliers or service providers may compete for business and some utility customers can choose among competing suppliers. The State of New Hampshire has been experimenting with a pilot program, mandated by the State Legislature in 1995 and implemented by the New Hampshire Public Utilities Commission (NHPUC), before it implements full retail access. Green marketing, an attempt to characterize the supplier or service provider as environmentally friendly without referring to the energy resource used to generate electricity, was used by several suppliers or service providers to attract customers. This appeal to environmental consumerism was moderately successful, but it raised a number of consumer protection and public policy issues. This issue brief examines the marketing methods used in New Hampshire and explores what green marketing might mean for the development of renewable energy generation. It also addresses the issues raised and their implications.

  8. Delta: Data Reduction for Integrated Application Workflows.

    SciTech Connect (OSTI)

    Lofstead, Gerald Fredrick; Jean-Baptiste, Gregory; Oldfield, Ron A.

    2015-06-01

    Integrated Application Workflows (IAWs) run multiple simulation workflow components con- currently on an HPC resource connecting these components using compute area resources and compensating for any performance or data processing rate mismatches. These IAWs require high frequency and high volume data transfers between compute nodes and staging area nodes during the lifetime of a large parallel computation. The available network band- width between the two areas may not be enough to efficiently support the data movement. As the processing power available to compute resources increases, the requirements for this data transfer will become more difficult to satisfy and perhaps will not be satisfiable at all since network capabilities are not expanding at a comparable rate. Furthermore, energy consumption in HPC environments is expected to grow by an order of magnitude as exas- cale systems become a reality. The energy cost of moving large amounts of data frequently will contribute to this issue. It is necessary to reduce the volume of data without reducing the quality of data when it is being processed and analyzed. Delta resolves the issue by addressing the lifetime data transfer operations. Delta removes subsequent identical copies of already transmitted data during transfers and restores those copies once the data has reached the destination. Delta is able to identify duplicated information and determine the most space efficient way to represent it. Initial tests show about 50% reduction in data movement while maintaining the same data quality and transmission frequency.

  9. EV/PHEV Bidirectional Charger Assessment for V2G Reactive Power Operation

    SciTech Connect (OSTI)

    Kisacikoglu, Mithat C; Ozpineci, Burak; Tolbert, Leon M

    2013-01-01

    This paper presents a summary of the available single-phase ac-dc topologies used for EV/PHEV, level-1 and -2 on-board charging and for providing reactive power support to the utility grid. It presents the design motives of single-phase on-board chargers in detail and makes a classification of the chargers based on their future vehicle-to-grid usage. The pros and cons of each different ac-dc topology are discussed to shed light on their suitability for reactive power support. This paper also presents and analyzes the differences between charging-only operation and capacitive reactive power operation that results in increased demand from the dc-link capacitor (more charge/discharge cycles and increased second harmonic ripple current). Moreover, battery state of charge is spared from losses during reactive power operation, but converter output power must be limited below its rated power rating to have the same stress on the dc-link capacitor.

  10. Generalized multiscale finite-element method (GMsFEM) for elastic wave propagation in heterogeneous, anisotropic media

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Gao, Kai; Fu, Shubin; Gibson, Richard L.; Chung, Eric T.; Efendiev, Yalchin

    2015-04-14

    It is important to develop fast yet accurate numerical methods for seismic wave propagation to characterize complex geological structures and oil and gas reservoirs. However, the computational cost of conventional numerical modeling methods, such as finite-difference method and finite-element method, becomes prohibitively expensive when applied to very large models. We propose a Generalized Multiscale Finite-Element Method (GMsFEM) for elastic wave propagation in heterogeneous, anisotropic media, where we construct basis functions from multiple local problems for both the boundaries and interior of a coarse node support or coarse element. The application of multiscale basis functions can capture the fine scale mediummore » property variations, and allows us to greatly reduce the degrees of freedom that are required to implement the modeling compared with conventional finite-element method for wave equation, while restricting the error to low values. We formulate the continuous Galerkin and discontinuous Galerkin formulation of the multiscale method, both of which have pros and cons. Applications of the multiscale method to three heterogeneous models show that our multiscale method can effectively model the elastic wave propagation in anisotropic media with a significant reduction in the degrees of freedom in the modeling system.« less

  11. Peeking Network States with Clustered Patterns

    SciTech Connect (OSTI)

    Kim, Jinoh; Sim, Alex

    2015-10-20

    Network traffic monitoring has long been a core element for effec- tive network management and security. However, it is still a chal- lenging task with a high degree of complexity for comprehensive analysis when considering multiple variables and ever-increasing traffic volumes to monitor. For example, one of the widely con- sidered approaches is to scrutinize probabilistic distributions, but it poses a scalability concern and multivariate analysis is not gen- erally supported due to the exponential increase of the complexity. In this work, we propose a novel method for network traffic moni- toring based on clustering, one of the powerful deep-learning tech- niques. We show that the new approach enables us to recognize clustered results as patterns representing the network states, which can then be utilized to evaluate “similarity” of network states over time. In addition, we define a new quantitative measure for the similarity between two compared network states observed in dif- ferent time windows, as a supportive means for intuitive analysis. Finally, we demonstrate the clustering-based network monitoring with public traffic traces, and show that the proposed approach us- ing the clustering method has a great opportunity for feasible, cost- effective network monitoring.

  12. Deterrence, denuclearization, and proliferation: Alternative visions of the next fifty years

    SciTech Connect (OSTI)

    Lehman, R.F. II

    1994-02-12

    The great library of Alexandria may have contained fewer volumes than the number which have been written on the subject of nuclear weapons in the Cold War. With the end of the Cold War, a new nuclear library is in the making. Much thought is being given to the next steps in nuclear policy, strategy, forces, arms control, and nonproliferation. For this very distinguished conference, however, I have been asked to look further ahead indeed, forward fifty-years. Prognostication is always a risky business. Detailed predictions beyond the shortest duration are difficult to label as ``scientific`` even in the social sciences. Forecasting ahead fifty years in an age of ever accelerating change would seem to be hopeless. Projecting the future of nuclear weapons, however, may not be as complex as one might think. Detailing the future fifty years from now is not necessary. We want to inform upcoming decisions by examining the possibilities, not write a history in advance of what is to happen. Our look forward con benefit from a brief look back fifty years. In retrospect, those years passed quickly, and with each additional year, analysts make them appear more simple than they seemed at the time. This paper contributes further to this process of oversimplification, as we say, ``for heuristic purposes.`` When in doubt, I have erred on the side of being provocative.

  13. Synthesis of Pt?Pd Core?Shell Nanostructures by Atomic Layer Deposition: Application in Propane Oxidative Dehydrogenation to Propylene

    SciTech Connect (OSTI)

    Lei, Y.; Liu, Bin; Lu, Junling; Lobo-Lapidus, Rodrigo J.; Wu, Tianpin; Feng, Hao; Xia, Xiaoxing; Mane, Anil U.; Libera, Joseph A.; Greeley, Jeffrey P.; Miller, Jeffrey T.; Elam, J. W.

    2012-08-20

    Atomic layer deposition (ALD) was employed to synthesize supported Pt?Pd bimetallic particles in the 1 to 2 nm range. The metal loading and composition of the supported Pt?Pd nanoparticles were controlled by varying the deposition temperature and by applying ALD metal oxide coatings to modify the support surface chemistry. Highresolution scanning transmission electron microscopy images showed monodispersed Pt?Pd nanoparticles on ALD Al2O3 - and TiO2 -modi?ed SiO2 gel. X-ray absorption spectroscopy revealed that the bimetallic nanoparticles have a stable Pt-core, Pd-shell nanostructure. Density functional theory calculations revealed that the most stable surface con?guration for the Pt? Pd alloys in an H2 environment has a Pt-core, Pd-shell nanostructure. In comparison to their monometallic counterparts, the small Pt?Pd bimetallic core?shell nanoparticles exhibited higher activity in propane oxidative dehydrogenation as compared to their physical mixture.

  14. Impact of x-ray dose on the response of CR-39 to 15.5 MeV alphas

    SciTech Connect (OSTI)

    Rojas-Herrera, J.; Rinderknecht, H. G.; Zylstra, A. B.; Gatu Johnson, M.; Orozco, D.; Rosenberg, M. J.; Sio, H.; Seguin, F. H.; Frenje, J. A.; Li, C. K.; Petrasso, R. D.

    2015-03-01

    The CR-39 nuclear track detector is used in many nuclear diagnostics #12;fielded at inertial con#12;nement fusion (ICF) facilities. Large x-ray uences generated by ICF experiments may impact the CR-39 response to incident charged particles. To determine the impact of x-ray exposure on the CR-39 response to alpha particles, a thick-target bremsstrahlung x-ray generator was used to expose CR-39 to various doses of 8 keV Cu-K?#11; and K#12;? x-rays. The CR-39 detectors were then exposed to 1-5.5 MeV alphas from an Am-241 source. The regions of the CR-39 exposed to x-rays showed a smaller track diameter than those not exposed to x-rays: for example, a dose of 3.0#6; 0.1 Gy causes a decrease of (19 #6;2)% in the track diameter of a 5.5 MeV alpha particle, while a dose of 60.0 #6;1.3 Gy results in a decrease of (45 #6;5)% in the track diameter. The reduced track diameters were found to be predominantly caused by a comparable reduction in the bulk etch rate of the CR-39 with x-ray dose. A residual eff#11;ect depending on alpha particle energy is characterized using an empirical formula.

  15. Management of water extracted from carbon sequestration projects

    SciTech Connect (OSTI)

    Harto, C. B.; Veil, J. A.

    2011-03-11

    Throughout the past decade, frequent discussions and debates have centered on the geological sequestration of carbon dioxide (CO{sub 2}). For sequestration to have a reasonably positive impact on atmospheric carbon levels, the anticipated volume of CO{sub 2} that would need to be injected is very large (many millions of tons per year). Many stakeholders have expressed concern about elevated formation pressure following the extended injection of CO{sub 2}. The injected CO{sub 2} plume could potentially extend for many kilometers from the injection well. If not properly managed and monitored, the increased formation pressure could stimulate new fractures or enlarge existing natural cracks or faults, so the CO{sub 2} or the brine pushed ahead of the plume could migrate vertically. One possible tool for management of formation pressure would be to extract water already residing in the formation where CO{sub 2} is being stored. The concept is that by removing water from the receiving formations (referred to as 'extracted water' to distinguish it from 'oil and gas produced water'), the pressure gradients caused by injection could be reduced, and additional pore space could be freed up to sequester CO{sub 2}. Such water extraction would occur away from the CO{sub 2} plume to avoid extracting a portion of the sequestered CO{sub 2} along with the formation water. While water extraction would not be a mandatory component of large-scale carbon storage programs, it could provide many benefits, such as reduction of pressure, increased space for CO{sub 2} storage, and potentially, 'plume steering.' Argonne National Laboratory is developing information for the U.S. Department of Energy's (DOE's) National Energy Technology Laboratory (NETL) to evaluate management of extracted water. If water is extracted from geological formations designated to receive injected CO{sub 2} for sequestration, the project operator will need to identify methods for managing very large volumes of water most of which will contain large quantities of salt and other dissolved minerals. Produced water from oil and gas production also typically contains large quantities of dissolved solids. Therefore, many of the same practices that are established and used for managing produced water also may be applicable for extracted water. This report describes the probable composition of the extracted water that is removed from the formations, options for managing the extracted water, the pros and cons of those options, and some opportunities for beneficial use of the water. Following the introductory material in Chapter 1, the report is divided into chapters covering the following topics: (Chapter 2) examines the formations that are likely candidates for CO{sub 2} sequestration and provides a general evaluation of the geochemical characteristics of the formations; (Chapter 3) makes some preliminary estimates of the volume of water that could be extracted; (Chapter 4) provides a qualitative review of many potential technologies and practices for managing extracted water and for each technology or management practice, pros and cons are provided; (Chapter 5) explores the potential costs of water management; and (Chapter 6) presents the conclusions.

  16. Work Domain Analysis of a Predecessor Sodium-cooled Reactor as Baseline for AdvSMR Operational Concepts

    SciTech Connect (OSTI)

    Ronald Farris; David Gertman; Jacques Hugo

    2014-03-01

    This report presents the results of the Work Domain Analysis for the Experimental Breeder Reactor (EBR-II). This is part of the phase of the research designed to incorporate Cognitive Work Analysis in the development of a framework for the formalization of an Operational Concept (OpsCon) for Advanced Small Modular Reactors (AdvSMRs). For a new AdvSMR design, information obtained through Cognitive Work Analysis, combined with human performance criteria, can and should be used in during the operational phase of a plant to assess the crew performance aspects associated with identified AdvSMR operational concepts. The main objective of this phase was to develop an analytical and descriptive framework that will help systems and human factors engineers to understand the design and operational requirements of the emerging generation of small, advanced, multi-modular reactors. Using EBR-II as a predecessor to emerging sodium-cooled reactor designs required the application of a method suitable to the structured and systematic analysis of the plant to assist in identifying key features of the work associated with it and to clarify the operational and other constraints. The analysis included the identification and description of operating scenarios that were considered characteristic of this type of nuclear power plant. This is an invaluable aspect of Operational Concept development since it typically reveals aspects of future plant configurations that will have an impact on operations. These include, for example, the effect of core design, different coolants, reactor-to-power conversion unit ratios, modular plant layout, modular versus central control rooms, plant siting, and many more. Multi-modular plants in particular are expected to have a significant impact on overall OpsCon in general, and human performance in particular. To support unconventional modes of operation, the modern control room of a multi-module plant would typically require advanced HSIs that would provide sophisticated operational information visualization, coupled with adaptive automation schemes and operator support systems to reduce complexity. These all have to be mapped at some point to human performance requirements. The EBR-II results will be used as a baseline that will be extrapolated in the extended Cognitive Work Analysis phase to the analysis of a selected advanced sodium-cooled SMR design as a way to establish non-conventional operational concepts. The Work Domain Analysis results achieved during this phase have not only established an organizing and analytical framework for describing existing sociotechnical systems, but have also indicated that the method is particularly suited to the analysis of prospective and immature designs. The results of the EBR-II Work Domain Analysis have indicated that the methodology is scientifically sound and generalizable to any operating environment.

  17. Spinning Reserve From Responsive Loads

    SciTech Connect (OSTI)

    Kirby, B.J.

    2003-04-08

    Responsive load is the most underutilized reliability resource available to the power system today. It is currently not used at all to provide spinning reserve. Historically there were good reasons for this, but recent technological advances in communications and controls have provided new capabilities and eliminated many of the old obstacles. North American Electric Reliability Council (NERC), Federal Energy Regulatory Commission (FERC), Northeast Power Coordinating Council (NPCC), New York State Reliability Council (NYSRC), and New York Independent System Operator (NYISO) rules are beginning to recognize these changes and are starting to encourage responsive load provision of reliability services. The Carrier ComfortChoice responsive thermostats provide an example of these technological advances. This is a technology aimed at reducing summer peak demand through central control of residential and small commercial air-conditioning loads. It is being utilized by Long Island Power Authority (LIPA), Consolidated Edison (ConEd), Southern California Edison (SCE), and San Diego Gas and Electric (SDG&E). The technology is capable of delivering even greater response in the faster spinning reserve time frame (while still providing peak reduction). Analysis of demand reduction testing results from LIPA during the summer of 2002 provides evidence to back up this claim. It also demonstrates that loads are different from generators and that the conventional wisdom, which advocates for starting with large loads as better ancillary service providers, is flawed. The tempting approach of incrementally adapting ancillary service requirements, which were established when generators were the only available resources, will not work. While it is easier for most generators to provide replacement power and non-spinning reserve (the slower response services) than it is to supply spinning reserve (the fastest service), the opposite is true for many loads. Also, there is more financial reward for supplying spinning reserve than for supplying the other reserve services as a result of the higher spinning reserve prices. The LIPAedge program (LIPA's demand reduction program using Carrier ComfortChoice thermostats) provides an opportunity to test the use of responsive load for spinning reserve. With potentially 75 MW of spinning reserve capability already installed, this test program can also make an important contribution to the capacity needs of Long Island during the summer of 2003. Testing could also be done at ConEd ({approx}30 MW), SCE ({approx}15 MW), and/or SDG&E ({approx}15 MW). This paper is divided into six chapters. Chapter 2 discusses the contingency reserve ancillary services, their functions in supporting power system reliability, and their technical requirements. It also discusses the policy and tariff requirements and attempts to distinguish between ones that are genuinely necessary and ones that are artifacts of the technologies that were historically used to provide the services. Chapter 3 discusses how responsive load could provide contingency reserves (especially spinning reserve) for the power system. Chapter 4 specifically discusses the Carrier ComfortChoice responsive thermostat technology, the LIPAedge experience with that technology, and how the technology could be used to supply spinning reserve. Chapter 5 discusses a number of unresolved issues and suggests areas for further research. Chapter 6 offers conclusions and recommendations.

  18. Quality management systems for fruit fly (Diptera: Tephritidae) sterile insect technique

    SciTech Connect (OSTI)

    Caceres, C.; Robinson, A.; Shelly, T.; Hendrichs, J.

    2007-03-15

    The papers presented in this issue are focused on developing and validating procedures to improve the overall quality of sterile fruit flies for use in area-wide integrated pest management (AW-IPM) programs with a sterile insect technique (SIT) component. The group was coordinated and partially funded by the Joint FAO/IAEA Programme of Nuclear Techniques in Food and Agriculture, International Atomic Energy Agency, Vienna, Austria, under a five-year Coordinated Research Project (CRP) on 'Quality Assurance in Mass-Reared and Released Fruit Flies for Use in SIT Programmes'. Participants in the CRP from 16 countries came from both basic and applied fields of expertise to ensure that appropriate and relevant procedures were developed. A variety of studies was undertaken to develop protocols to assess strain compatibility and to improve colonization procedures and strain management. Specific studies addressed issues related to insect nutrition, irradiation protocols, field dispersal and survival, field cage behavior assessments, and enhancement of mating competitiveness. The main objective was to increase the efficiency of operational fruit fly programs using sterile insects and to reduce their cost. Many of the protocols developed or improved during the CRP will be incorporated into the international quality control manual for sterile tephritid fruit flies, standardizing key components of the production, sterilization, shipment, handling, and release of sterile insects. (author) [Spanish] Los articulos presentados en este numero se enfocan en el desarrollo y la validacion de procedimientos para mejorar la calidad total de moscas de las frutas esteriles para su uso en programas de manejo integrado de plagas en donde la tecnica del insecto esteril (TIE) es uno de los componentes clave. El grupo fue coordinado y parcialmente financiado por la Division Conjunta de Tecnicas Nucleares para la Alimentacion y la Agricultura de la FAO/OIEA, Viena, Austria, por un periodo de cinco anos bajo el proyecto de Investigacion Coordinada (PIC) sobre 'el Aseguramiento de la Calidad de Moscas de las Frutas Criadas y Liberadas para su Uso en Programas de TIE'. Los participantes en el PIC representan 16 paises con experiencia en campos de investigacion basica y aplicada. Para asegurar que los procedimientos desarrollados fueran apropiados y pertinentes, se realizaron una variedad de estudios para el desarrollo de protocolos para evaluar la compatibilidad y para mejorar los procedimientos de colonizacion y manejo de cepas salvajes. Estudios especificos trataron asuntos relacionados con la nutricion de insectos, los protocolos de irradiacion, la dispersion y supervivencia en el campo, evaluacion del comportamiento en jaulas de campo, y el mejoramiento de la competitividad sexual. Los objetivos fundamentales fueron el aumentar la eficiencia y reducir los costos de los programas operacionales de control de moscas de las frutas donde TIE es utilizada. Muchos de los protocolos desarrollados o mejorados durante el PIC seran incorporados en el Manual Internacional de Control de Calidad para Moscas Estriles de la familia Tephritidae, para estandarizar componentes claves como la produccion, esterilizacion, envio, manejo y liberacion de insectos esteriles. (author)

  19. Implementation and Re nement of a Comprehensive Model for Dense Granular Flows

    SciTech Connect (OSTI)

    Sundaresan, Sankaran

    2015-09-30

    Dense granular ows are ubiquitous in both natural and industrial processes. They manifest three di erent ow regimes, each exhibiting its own dependence on solids volume fraction, shear rate, and particle-level properties. This research project sought to develop continuum rheological models for dense granular ows that bridges multiple regimes of ow, implement them in open-source platforms for gas-particle ows and perform test simulations. The rst phase of the research covered in this project involved implementation of a steady- shear rheological model that bridges quasi-static, intermediate and inertial regimes of ow into MFIX (Multiphase Flow with Interphase eXchanges - a general purpose computer code developed at the National Energy Technology Laboratory). MFIX simulations of dense granular ows in hourglass-shaped hopper were then performed as test examples. The second phase focused on formulation of a modi ed kinetic theory for frictional particles that can be used over a wider range of particle volume fractions and also apply for dynamic, multi- dimensional ow conditions. To guide this work, simulations of simple shear ows of identical mono-disperse spheres were also performed using the discrete element method. The third phase of this project sought to develop and implement a more rigorous treatment of boundary e ects. Towards this end, simulations of simple shear ows of identical mono-disperse spheres con ned between parallel plates were performed and analyzed to formulate compact wall boundary conditions that can be used for dense frictional ows at at frictional boundaries. The fourth phase explored the role of modest levels of cohesive interactions between particles on the dense phase rheology. The nal phase of this project focused on implementation and testing of the modi ed kinetic theory in MFIX and running bin-discharge simulations as test examples.

  20. Condensing economizers for thermal efficiency improvements and emissions control

    SciTech Connect (OSTI)

    Heaphy, J.P.; Carbonara, J.; Litzke, W.; Butcher, T.A.

    1993-12-31

    Flue gas condensing economizers improve the thermal efficiency of boilers by recovering sensible heat and water vapor latent heat from flue gas exhaust. In addition to improving thermal efficiency, condensing economizers also have the potential to act as control devices for emissions of particulates, SO{sub x}, and air toxics. Both Consolidated Edison of New York and Brookhaven National LaborAtory are currently working on condensing economizer technology with an emphasis on developing their potential for emissions control. Con Edison is currently conducting a condensing economizer demonstration at their oil-fired 74th Street Station in New York. Since installing this equipment in February of 1992 a heat rate improvement of 800 Btu/kWh has been seen. At another location, Ravenswood Station, a two stage condensing economizer has been installed in a pilot test. In this advanced configuration -the ``Integrated Flue Gas Treatment or IFGT system- two heat exchanger sections are installed and sprays of water with and without SO{sub 2} sorbents are included. Detailed studies of the removal of particulates, SO{sub 2}, SO{sub 3}, and selected air toxics have been done for a variety of operating conditions. Removal efficiencies for SO{sub 2} have been over 98% and for SO{sub 3} over 65%. Brookhaven National Laboratory`s studies involve predicting and enhancing particulate capture in condensing economizers with an emphasis on small, coal-fired applications. This work is funded by the Pittsburgh Energy Technology Center of the Department of Energy. Flyash capture efficiencies as high as 97% have been achieved to date with a single stage economizer.

  1. Environmental restoration and waste management: An introduction. Student edition; Restauracion ambiental y administracion de residuos nucleares: Introduccion; Edicion estudiantil

    SciTech Connect (OSTI)

    Not Available

    1993-12-31

    For more than 40 years, the United States has produced nuclear weapons. These production activities generated both radioactive and hazardous waste and often contaminated the environment. For many years, the public was unaware of the problem and unable to do anything about it. All of this has changed. In response to recent public outcry, the former Secretary of Energy, Retired Admiral James D. Watkins, established the Office of Environmental Restoration and Waste Management (EM) in November 1989. The creation of EM was the first step toward correcting contamination problems from the past 40 years In this booklet, we at DOE, through the efforts of the students at Oak Hills High School of Cincinnati, Ohio, will introduce you to EM and encourage your involvement in this major program within the Department of Energy. [Espanol] Durante mas de 40 anos, los Estados Unidos fabricaron armamentos nucleares. Esta produccion genero residuos radiactivos y peligrosos y, en muchos casos, contaminaron el medio ambiente. Durante mucho tiempo, el publico norteamericano no tenia conocimiento de este problema y no pudo hacer nada para solucionarlo. Todo esto ha cambiado. Respondiendo a crecientes protestas publicas, el ex Secretario de Energia Almirante James D. Watkins, establecio en noviembre de 1989 la Subsecretaria de Administracion Ambiental. La creacion de esta Subsecretaria fue el primer paso que dio el Departamento de Energia para corregir los problemas de contaminacion ambiental de los ultimos 40 anos. En esta publicacion, los que trabajamos en el Departamento de Energia con la ayuda de los estudiantes de la Escuela Secundaria de Oak Hills, Cincinnati, Ohio, te introduciermos a la administracion ambiental y alentamos tu participacion en este programa de fundamental importancia en el Departamento de Energia.

  2. Scanning Tunneling Microscopy and Theoretical Study of Water Adsorption on Fe3O4: Implications for Catalysis

    SciTech Connect (OSTI)

    Rim, Kwang T.; Eom, Daejin; Chan, Siu-Wai; Flytzani-Stephanopoulos, Maria; Flynn, George; Wen, Xiaodong; Batista, Enrique R.

    2012-10-23

    The reduced surface of a natural Hematite single crystal a-Fe2O3(0001) sample has multiple surface domains with di!erent terminations, Fe2O3(0001), FeO(111), and Fe3O4(111). The adsorption of water on this surface was investigated via Scanning Tunneling Microscopy (STM) and first-principle theoretical simulations. Water species are observed only on the Fe-terminated Fe3O4(111) surface at temperatures up to 235 K. Between 235 and 245 K we observed a change in the surface species from intact water molecules and hydroxyl groups bound to the surface to only hydroxyl groups atop the surface terminating FeIII cations. This indicates a low energy barrier for water dissociation on the surface of Fe3O4 that is supported by our theoretical computations. Our first principles simulations con"rm the identity of the surface species proposed from the STM images, finding that the most stable state of a water molecule is the dissociated one (OH + H), with OH atop surface terminating FeIII sites and H atop under-coordinated oxygen sites. Attempts to simulate reaction of the surface OH with coadsorbed CO fail because the only binding sites for CO are the surface FeIII atoms, which are blocked by the much more strongly bound OH. In order to promote this reaction we simulated a surface decorated with gold atoms. The Au adatoms are found to cap the under-coordinated oxygen sites and dosed CO is found to bind to the Au adatom. This newly created binding site for CO not only allows for coexistence of CO and OH on the surface of Fe3O4 but also provides colocation between the two species. These two factors are likely promoters of catalytic activity on Au/Fe3O4(111) surfaces.

  3. Quadrature conductivity: A quantitative indicator of bacterial abundance in porous media

    SciTech Connect (OSTI)

    Chi Zhang; Andre Revil; Yoshiko Fujita; Junko Munakata-Marr; George Redden

    2014-09-01

    ABSTRACT The abundance and growth stages of bacteria in subsurface porous media affect the concentrations and distributions of charged species within the solid-solution interfaces. Therefore, spectral induced polarization (SIP) measurements can be used to monitor changes in bacterial biomass and growth stage. Our goal was to gain a better understanding of the SIP response of bacteria present in a porous material. Bacterial cell surfaces possess an electric double layer and therefore become polarized in an electric field. We performed SIP measurements over the frequency range of 0.11 kHz on cell suspensions alone and cell suspensions mixed with sand at four pore water conductivities. We used Zymomonas mobilis at four different cell densities (in- cluding the background). The quadrature conductivity spectra exhibited two peaks, one around 0.050.10 Hz and the other around 110 Hz. Because SIP measurements on bacterial suspensions are typically made at frequencies greater than 1 Hz, these peaks have not been previously reported. In the bac-terial suspensions in growth medium, the quadrature conduc-tivity at peak I was linearly proportional to the density of the bacteria. For the case of the suspensions mixed with sands, we observed that peak II presented a smaller increase in the quadrature conductivity with the cell density. A comparison of the experiments with and without sand grains illustrated the effect of the porous medium on the overall quadrature con- ductivity response (decrease in the amplitude and shift of the peaks to the lower frequencies). Our results indicate that for a given porous medium, time-lapse SIP has potential for mon- itoring changes in bacterial abundance within porous media.

  4. Issues and methods in incorporating environmental externalities into the integrated resource planning process

    SciTech Connect (OSTI)

    Fang, J.M.; Galen, P.S.

    1994-11-01

    This report is a review of current practices and policies in considering environmental externalities in the integrated resource planning and performance based regulation (IRP/PBR) process. The following issues are presented and examined: What are the pros and cons of treating environmental externalities in the IRP process? How are potential future environmental regulations being treated? Are externalities being qualitatively or quantitatively considered, or monetized? Are offsets being allowed? How are externality policies being coordinated among different levels and branches of governments? Should environmental externalities be considered in dispatching a utility`s existing resources? What are the procedures for addressing uncertainty in incorporating environmental externalities into IRP? How are externalities valued? What are other approaches to addressing environmental externalities. This report describes seven major approaches for addressing environmental externalities in the IRP process: qualitative treatment, weighting and ranking, cost of control, damage function, percentage adders, monetization by emission, and multiattribute trade-off analysis. The discussion includes a taxonomy of the full range of alternative methods for addressing environmental externalities, a summary of state PUC actions, the role of state laws, the debate on environmental adders, and the choice of methodologies. In addition, this report characterizes the interests of stakeholders such as the electric industry, fuel suppliers, energy consumers, governmental agencies, public interest groups, consultants, and others. It appears that the views, positions, and interests of these stakeholders are affected by their perceptions of the potential impacts on their economic interests or the viability of their position on environmental policy, by the societal perspective they take, and by the orientation of the analysts toward market competition and their respective accumulated expertise.

  5. Ga-67 vs In-111-DTPA-anti-p97 monoclonal antibody (MoAb) for scintigraphic detection of metastatic melanoma

    SciTech Connect (OSTI)

    Neumann, R.D.; Kirkwood, J.M.; Zoghbi, S.S.; Ernstoff, M.S.; Cornelius, E.A.; Hoffer, P.B.; Gottschalk, A.

    1985-05-01

    The authors have initiated a prospective comparative evaluation of tomographic (Pho/Con) Ga-67 (10 mCi) scintigraphy versus computerized gamma camera radioimmunoscintigraphy using anti-p97 murine MoAb (5 mCi In-111-DTPA conjugated to 1 mg MoAb + 19 mgs ''cold'' MoAb) for detection of metastatic melanoma. To date 9 patients have had both a Ga-67 scan and an anti-p97 MoAb study within a 1 month interval. The 9 patients had 45 known sites of disease greater than 1 cm minimum diameter, located in skin, soft tissue, and/or viscea. In-111-anti-p97 scans were done 72 hrs after i.v. administration of the radiolabeled MoAb mixed together with the ''cold'' carrier MoAb. Ga-67 scans were done 48-72 hrs after injection. MoAb scans detected 30/45 known sites (sensitivity=67%) while the Ga-67 scans found 29/45 of these known sites (sensitivity=64%). Heterogeneity of metastases was evident with the detection of partly overlapping subsets of metastases by the two techniques, i.e. some mets were localized with both techniques while other mets were detected by only one of the two methods. Combined detection with both techniques improved sensitivity from 64-67% to 91%. These preliminary data suggest: 1) comparable sensitivities for Ga-67 and In-111-DTPA anti-p97 scans, 2) heterogeneity of metastases with regard to the localization of these two agents, and 3) improved sensitivity by combining both techniques.

  6. A workshop on developing risk assessment methods for medical use of radioactive material. Volume 1: Summary

    SciTech Connect (OSTI)

    Tortorelli, J.P.

    1995-08-01

    A workshop was held at the Idaho National Engineering Laboratory, August 16--18, 1994 on the topic of risk assessment on medical devices that use radioactive isotopes. Its purpose was to review past efforts to develop a risk assessment methodology to evaluate these devices, and to develop a program plan and a scoping document for future methodology development. This report contains a summary of that workshop. Participants included experts in the fields of radiation oncology, medical physics, risk assessment, human-error analysis, and human factors. Staff from the US Nuclear Regulatory Commission (NRC) associated with the regulation of medical uses of radioactive materials and with research into risk-assessment methods participated in the workshop. The workshop participants concurred in NRC`s intended use of risk assessment as an important technology in the development of regulations for the medical use of radioactive material and encouraged the NRC to proceed rapidly with a pilot study. Specific recommendations are included in the executive summary and the body of this report. An appendix contains the 8 papers presented at the conference: NRC proposed policy statement on the use of probabilistic risk assessment methods in nuclear regulatory activities; NRC proposed agency-wide implementation plan for probabilistic risk assessment; Risk evaluation of high dose rate remote afterloading brachytherapy at a large research/teaching institution; The pros and cons of using human reliability analysis techniques to analyze misadministration events; Review of medical misadministration event summaries and comparison of human error modeling; Preliminary examples of the development of error influences and effects diagrams to analyze medical misadministration events; Brachytherapy risk assessment program plan; and Principles of brachytherapy quality assurance.

  7. Dexterity tests data contribute to reduction in leaded glovebox gloves use

    SciTech Connect (OSTI)

    Cournoyer, Michael E; Lawton, Cindy M; Castro, Amanda M

    2008-01-01

    Programmatic operations at the Los Alamos National Laboratory Plutonium Facility (TA-55) involve working with various amounts of plutonium and other highly toxic, alphaemitting materials. The spread of radiological contamination on surfaces and airborne contamination and excursions of contaminants into the operator's breathing zone are prevented through the use of a variety of gloveboxes. Through an integrated approach, controls have been developed and implemented through an efficient Glovebox Glove Integrity Program (GGJP). A key element of this program is to consider measures that lower the overall risk of glovebox operations. Line management owning glovebox processes through this program make decisions on which type of glovebox gloves (the weakest component of this safety significant system) would perform in these aggressive environments. As Low As Reasonably Achievable (ALARA) considerations must be balanced with glove durability and worker dexterity, both of which affect the final overall risk of the operation. In the past, lead-loaded (leaded) glovebox gloves made from Hypalon(reg.) had been the workhorse of programmatic operations at TA-55. Replacing leaded gloves with unleaded gloves for certain operations would lower the overall risk as well as reduced the amount of mixed TRU waste. This effort contributes to Los Alamos National Laboratory Continuous Improvement Program by improving the efficiency, cost effectiveness, and formality of glovebox operations. In the following report, the pros and cons of wearing leaded glovebox gloves, the effect of leaded gloves versus unleaded gloves on task performance using standard dexterity tests, the justification for switching from leaded to unleaded gloves, and pollution prevention benefits of this dramatic change in the glovebox system are presented.

  8. Dexterity test data contribute to reduction in leaded glovebox gloves use

    SciTech Connect (OSTI)

    Cournoyer, Michael E; Lawton, Cindy M; Castro, Amanda M; Costigan, Stephen A; Schreiber, Stephen

    2009-01-01

    Programmatic operations at the Los Alamos National Laboratory Plutonium Facility (T A-55) involve working with various amounts of plutonium and other highly toxic, alpha-emitting materials. The spread of radiological contamination on surfaces, airborne contamination, and excursions of contaminants into the operator's breathing zone are prevented through the use of a variety of gloveboxes. Using an integrated approach, controls have been developed and implemented through an efficient Glovebox Glove Integrity Program. A key element of this program is to consider measures that lower the overall risk of glovebox operations. Line management who own glovebox processes through this program make decisions on which type of glovebox gloves (hereafter referred to as gloves), the weakest component of this safety-significant system, would perform best in these aggressive environments. As Low as Reasonably Achievable considerations must be balanced with glove durability and worker dexterity, both of which affect the final overall risk of the operation. In the past, lead-loaded (leaded) gloves made from Hypalon(reg.) were the primary glove for programmatic operations at TA55. Replacing leaded gloves with unleaded gloves for certain operations would lower the overall risk as well as reduce the amount of mixed transuranic waste. This effort contributes to the Los Alamos National Laboratory Continuous Improvement Program by improving the efficiency, cost-effectiveness, and formality of glovebox operations. In this report, the pros and cons of wearing leaded gloves, the effect of leaded gloves versus unleaded gloves on task performance using standard dexterity tests, the justification for switching from leaded to unleaded gloves, and the pollution prevention benefits of this dramatic change in the glovebox system are presented.

  9. COOLING WATER ISSUES AND OPPORTUNITIES AT U.S. NUCLEAR POWER PLANTS

    SciTech Connect (OSTI)

    Gary Vine

    2010-12-01

    This report has been prepared for the Department of Energy, Office of Nuclear Energy (DOE-NE), for the purpose of providing a status report on the challenges and opportunities facing the U.S. commercial nuclear energy industry in the area of plant cooling water supply. The report was prompted in part by recent Second Circuit and Supreme Court decisions regarding cooling water system designs at existing thermo-electric power generating facilities in the U.S. (primarily fossil and nuclear plants). At issue in the courts have been Environmental Protection Agency regulations that define what constitutes Best Technology Available for intake structures that withdraw cooling water that is used to transfer and reject heat from the plants steam turbine via cooling water systems, while minimizing environmental impacts on aquatic life in nearby water bodies used to supply that cooling water. The report was also prompted by a growing recognition that cooling water availability and societal use conflicts are emerging as strategic energy and environmental issues, and that research and development (R&D) solutions to emerging water shortage issues are needed. In particular, cooling water availability is an important consideration in siting decisions for new nuclear power plants, and is an under-acknowledged issue in evaluating the pros and cons of retrofitting cooling towers at existing nuclear plants. Because of the significant ongoing research on water issues already being performed by industry, the national laboratories and other entities, this report relies heavily on ongoing work. In particular, this report has relied on collaboration with the Electric Power Research Institute (EPRI), including its recent work in the area of EPA regulations governing intake structures in thermoelectric cooling water systems.

  10. Effect of intranasal manganese administration on neurotransmission and spatial learning in rats

    SciTech Connect (OSTI)

    Blecharz-Klin, Kamilla; Piechal, Agnieszka; Joniec-Maciejak, Ilona; Pyrzanowska, Justyna; Widy-Tyszkiewicz, Ewa

    2012-11-15

    The effect of intranasal manganese chloride (MnCl{sub 2}4H{sub 2}O) exposure on spatial learning, memory and motor activity was estimated in Morris water maze task in adult rats. Three-month-old male Wistar rats received for 2 weeks MnCl{sub 2}4H{sub 2}O at two doses the following: 0.2 mg/kg b.w. (Mn0.2) or 0.8 mg/kg b.w. (Mn0.8) per day. Control (Con) and manganese-exposed groups were observed for behavioral performance and learning in water maze. ANOVA for repeated measurements did not show any significant differences in acquisition in the water maze between the groups. However, the results of the probe trial on day 5, exhibited spatial memory deficits following manganese treatment. After completion of the behavioral experiment, the regional brain concentrations of neurotransmitters and their metabolites were determined via HPLC in selected brain regions, i.e. prefrontal cortex, hippocampus and striatum. ANOVA demonstrated significant differences in the content of monoamines and metabolites between the treatment groups compared to the controls. Negative correlations between platform crossings on the previous platform position in Southeast (SE) quadrant during the probe trial and neurotransmitter turnover suggest that impairment of spatial memory and cognitive performance after manganese (Mn) treatment is associated with modulation of the serotonergic, noradrenergic and dopaminergic neurotransmission in the brain. These findings show that intranasally applied Mn can impair spatial memory with significant changes in the tissue level and metabolism of monoamines in several brain regions. -- Highlights: ? Intranasal exposure to manganese in rats impairs spatial memory in the water maze. ? Regional changes in levels of neurotransmitters in the brain have been identified. ? Cognitive disorder correlates with modulation of 5-HT, NA and DA neurotransmission.

  11. Integration of health into urban spatial planning through impact assessment: Identifying governance and policy barriers and facilitators

    SciTech Connect (OSTI)

    Carmichael, Laurence; Barton, Hugh; Gray, Selena; Lease, Helen; Pilkington, Paul

    2012-01-15

    This article presents the results of a review of literature examining the barriers and facilitators in integrating health in spatial planning at the local, mainly urban level, through appraisals. Our literature review covered the UK and non UK experiences of appraisals used to consider health issues in the planning process. We were able to identify four main categories of obstacles and facilitators including first the different knowledge and conceptual understanding of health by different actors/stakeholders, second the types of governance arrangements, in particular partnerships, in place and the political context, third the way institutions work, the responsibilities they have and their capacity and resources and fourth the timeliness, comprehensiveness and inclusiveness of the appraisal process. The findings allowed us to draw some lessons on the governance and policy framework regarding the integration of health impact into spatial planning, in particular considering the pros and cons of integrating health impact assessment (HIA) into other forms of impact assessment of spatial planning decisions such as environmental impact assessment (EIA) and strategic environment assessment (SEA). In addition, the research uncovered a gap in the literature that tends to focus on the mainly voluntary HIA to assess health outcomes of planning decisions and neglect the analysis of regulatory mechanisms such as EIA and SEA. - Highlights: Black-Right-Pointing-Pointer Governance and policy barriers and facilitators to the integration of health into urban planning. Black-Right-Pointing-Pointer Review of literature on impact assessment methods used across the world. Black-Right-Pointing-Pointer Knowledge, partnerships, management/resources and processes can impede integration. Black-Right-Pointing-Pointer HIA evaluations prevail uncovering research opportunities for evaluating other techniques.

  12. Integration of Advanced Probabilistic Analysis Techniques with Multi-Physics Models

    SciTech Connect (OSTI)

    Cetiner, Mustafa Sacit; none,; Flanagan, George F.; Poore III, Willis P.; Muhlheim, Michael David

    2014-07-30

    An integrated simulation platform that couples probabilistic analysis-based tools with model-based simulation tools can provide valuable insights for reactive and proactive responses to plant operating conditions. The objective of this work is to demonstrate the benefits of a partial implementation of the Small Modular Reactor (SMR) Probabilistic Risk Assessment (PRA) Detailed Framework Specification through the coupling of advanced PRA capabilities and accurate multi-physics plant models. Coupling a probabilistic model with a multi-physics model will aid in design, operations, and safety by providing a more accurate understanding of plant behavior. This represents the first attempt at actually integrating these two types of analyses for a control system used for operations, on a faster than real-time basis. This report documents the development of the basic communication capability to exchange data with the probabilistic model using Reliability Workbench (RWB) and the multi-physics model using Dymola. The communication pathways from injecting a fault (i.e., failing a component) to the probabilistic and multi-physics models were successfully completed. This first version was tested with prototypic models represented in both RWB and Modelica. First, a simple event tree/fault tree (ET/FT) model was created to develop the software code to implement the communication capabilities between the dynamic-link library (dll) and RWB. A program, written in C#, successfully communicates faults to the probabilistic model through the dll. A systems model of the Advanced Liquid-Metal Reactor–Power Reactor Inherently Safe Module (ALMR-PRISM) design developed under another DOE project was upgraded using Dymola to include proper interfaces to allow data exchange with the control application (ConApp). A program, written in C+, successfully communicates faults to the multi-physics model. The results of the example simulation were successfully plotted.

  13. Neutron Generators for Spent Fuel Assay

    SciTech Connect (OSTI)

    Ludewigt, Bernhard A

    2010-12-30

    The Next Generation Safeguards Initiative (NGSI) of the U.S. DOE has initiated a multi-lab/university collaboration to quantify the plutonium (Pu) mass in, and detect the diversion of pins from, spent nuclear fuel (SNF) assemblies with non-destructive assay (NDA). The 14 NDA techniques being studied include several that require an external neutron source: Delayed Neutrons (DN), Differential Die-Away (DDA), Delayed Gammas (DG), and Lead Slowing-Down Spectroscopy (LSDS). This report provides a survey of currently available neutron sources and their underlying technology that may be suitable for NDA of SNF assemblies. The neutron sources considered here fall into two broad categories. The term 'neutron generator' is commonly used for sealed devices that operate at relatively low acceleration voltages of less than 150 kV. Systems that employ an acceleration structure to produce ion beam energies from hundreds of keV to several MeV, and that are pumped down to vacuum during operation, rather than being sealed units, are usually referred to as 'accelerator-driven neutron sources.' Currently available neutron sources and future options are evaluated within the parameter space of the neutron generator/source requirements as currently understood and summarized in section 2. Applicable neutron source technologies are described in section 3. Commercially available neutron generators and other source options that could be made available in the near future with some further development and customization are discussed in sections 4 and 5, respectively. The pros and cons of the various options and possible ways forward are discussed in section 6. Selection of the best approach must take a number of parameters into account including cost, size, lifetime, and power consumption, as well as neutron flux, neutron energy spectrum, and pulse structure that satisfy the requirements of the NDA instrument to be built.

  14. Microgrid Design Analysis Using Technology Management Optimization and the Performance Reliability Model

    SciTech Connect (OSTI)

    Stamp, Jason E.; Eddy, John P.; Jensen, Richard P.; Munoz-Ramos, Karina

    2016-01-01

    Microgrids are a focus of localized energy production that support resiliency, security, local con- trol, and increased access to renewable resources (among other potential benefits). The Smart Power Infrastructure Demonstration for Energy Reliability and Security (SPIDERS) Joint Capa- bility Technology Demonstration (JCTD) program between the Department of Defense (DOD), Department of Energy (DOE), and Department of Homeland Security (DHS) resulted in the pre- liminary design and deployment of three microgrids at military installations. This paper is focused on the analysis process and supporting software used to determine optimal designs for energy surety microgrids (ESMs) in the SPIDERS project. There are two key pieces of software, an ex- isting software application developed by Sandia National Laboratories (SNL) called Technology Management Optimization (TMO) and a new simulation developed for SPIDERS called the per- formance reliability model (PRM). TMO is a decision support tool that performs multi-objective optimization over a mixed discrete/continuous search space for which the performance measures are unrestricted in form. The PRM is able to statistically quantify the performance and reliability of a microgrid operating in islanded mode (disconnected from any utility power source). Together, these two software applications were used as part of the ESM process to generate the preliminary designs presented by SNL-led DOE team to the DOD. Acknowledgements Sandia National Laboratories and the SPIDERS technical team would like to acknowledge the following for help in the project: * Mike Hightower, who has been the key driving force for Energy Surety Microgrids * Juan Torres and Abbas Akhil, who developed the concept of microgrids for military instal- lations * Merrill Smith, U.S. Department of Energy SPIDERS Program Manager * Ross Roley and Rich Trundy from U.S. Pacific Command * Bill Waugaman and Bill Beary from U.S. Northern Command * Tarek Abdallah, Melanie Johnson, and Harold Sanborn of the U.S. Army Corps of Engineers Construction Engineering Research Laboratory * Colleagues from Sandia National Laboratories (SNL) for their reviews, suggestions, and participation in the work.

  15. Alternative Formats to Achieve More Efficient Energy Codes for Commercial Buildings

    SciTech Connect (OSTI)

    Conover, David R.; Rosenberg, Michael I.; Halverson, Mark A.; Taylor, Zachary T.; Makela, Eric J.

    2013-01-26

    This paper identifies and examines several formats or structures that could be used to create the next generation of more efficient energy codes and standards for commercial buildings. Pacific Northwest National Laboratory (PNNL) is funded by the U.S. Department of Energys Building Energy Codes Program (BECP) to provide technical support to the development of ANSI/ASHRAE/IES Standard 90.1. While the majority of PNNLs ASHRAE Standard 90.1 support focuses on developing and evaluating new requirements, a portion of its work involves consideration of the format of energy standards. In its current working plan, the ASHRAE 90.1 committee has approved an energy goal of 50% improvement in Standard 90.1-2013 relative to Standard 90.1-2004, and will likely be considering higher improvement targets for future versions of the standard. To cost-effectively achieve the 50% goal in manner that can gain stakeholder consensus, formats other than prescriptive must be considered. Alternative formats that include reducing the reliance on prescriptive requirements may make it easier to achieve these aggressive efficiency levels in new codes and standards. The focus on energy code and standard formats is meant to explore approaches to presenting the criteria that will foster compliance, enhance verification, and stimulate innovation while saving energy in buildings. New formats may also make it easier for building designers and owners to design and build the levels of efficiency called for in the new codes and standards. This paper examines a number of potential formats and structures, including prescriptive, performance-based (with sub-formats of performance equivalency and performance targets), capacity constraint-based, and outcome-based. The paper also discusses the pros and cons of each format from the viewpoint of code users and of code enforcers.

  16. period-1 encodes an ATP-dependent RNA helicase that in?uences nutritional compensation of the Neurospora circadian clock

    SciTech Connect (OSTI)

    Emerson, Jillian M.; Bartholomai, Bradley M.; Ringelberg, Carol; Baker, Scott E.; Loros, Jennifer J.; Dunlap, Jay C.

    2015-12-22

    Mutants in the period-1 (prd-1) gene, characterized by a recessive allele, display a reduced growth rate and period lengthening of the developmental cycle controlled by the circadian clock. We re?ned the genetic location of prd-1 and used whole genome sequencing to ?nd the mutation de?ning it, con?rming the identity of prd-1 by rescuing the mutant circadian phenotype via transformation. PRD-1 is an RNA helicase whose orthologs, DDX5 and DDX17 in humans and Dbp2p in yeast, are implicated in various processes including transcriptional regulation, elongation, and termination, 23 ribosome biogenesis, and RNA decay. Although prdi-1smutantssiois an ATP-dependent RNA helicase, member of a sub-family display a long period (?25 hrs) circadian developmental cycle, they interestingly display a wild type period when the core circadian oscillator is tracked using a frq-luciferase transcriptional fusion under conditions of limiting nutritional carbon; the core oscillator runs with a long period under glucose-suf?cient conditions. Thus PRD-1 clearly impacts the circadian oscillator and is not only part of a metabolic oscillator ancillary to the core clock. PRD-1 is an essential protein and its expression is neither light-regulated nor clock-regulated. However, it is transiently induced by glucose; in the presence of suf?cient glucose PRD-1 is in the nucleus until glucose runs out which elicits its disappearance from the nucleus. Because circadian period length is carbon concentration-dependent, prd-1 may be formally viewed as clock mutant with defective nutritional compensation of circadian period length.

  17. U.S. Department of Energy -- Advanced Vehicle Testing Activity: Plug-in Hybrid Electric Vehicle Testing and Demonstration Activities

    SciTech Connect (OSTI)

    James E. Francfort; Donald Karner; John G. Smart

    2009-05-01

    The U.S. Department of Energy’s (DOE) Advanced Vehicle Testing Activity (AVTA) tests plug-in hybrid electric vehicles (PHEV) in closed track, dynamometer and onroad testing environments. The onroad testing includes the use of dedicated drivers on repeated urban and highway driving cycles that range from 10 to 200 miles, with recharging between each loop. Fleet demonstrations with onboard data collectors are also ongoing with PHEVs operating in several dozen states and Canadian Provinces, during which trips- and miles-per-charge, charging demand and energy profiles, and miles-per-gallon and miles-per-kilowatt-hour fuel use results are all documented, allowing an understanding of fuel use when vehicles are operated in charge depleting, charge sustaining, and mixed charge modes. The intent of the PHEV testing includes documenting the petroleum reduction potential of the PHEV concept, the infrastructure requirements, and operator recharging influences and profiles. As of May 2008, the AVTA has conducted track and dynamometer testing on six PHEV conversion models and fleet testing on 70 PHEVs representing nine PHEV conversion models. A total of 150 PHEVs will be in fleet testing by the end of 2008, all with onboard data loggers. The onroad testing to date has demonstrated 100+ miles per gallon results in mostly urban applications for approximately the first 40 miles of PHEV operations. The primary goal of the AVTA is to provide advanced technology vehicle performance benchmark data for technology modelers, research and development programs, and technology goal setters. The AVTA testing results also assist fleet managers in making informed vehicle purchase, deployment and operating decisions. The AVTA is part of DOE’s Vehicle Technologies Program. These AVTA testing activities are conducted by the Idaho National Laboratory and Electric Transportation Engineering Corporation, with Argonne National Laboratory providing dynamometer testing support. The proposed paper and presentation will discuss PHEV testing activities and results. INL/CON-08-14333

  18. Intrinsic Uncertainties in Modeling Complex Systems.

    SciTech Connect (OSTI)

    Cooper, Curtis S; Bramson, Aaron L.; Ames, Arlo L.

    2014-09-01

    Models are built to understand and predict the behaviors of both natural and artificial systems. Because it is always necessary to abstract away aspects of any non-trivial system being modeled, we know models can potentially leave out important, even critical elements. This reality of the modeling enterprise forces us to consider the prospective impacts of those effects completely left out of a model - either intentionally or unconsidered. Insensitivity to new structure is an indication of diminishing returns. In this work, we represent a hypothetical unknown effect on a validated model as a finite perturba- tion whose amplitude is constrained within a control region. We find robustly that without further constraints, no meaningful bounds can be placed on the amplitude of a perturbation outside of the control region. Thus, forecasting into unsampled regions is a very risky proposition. We also present inherent difficulties with proper time discretization of models and representing in- herently discrete quantities. We point out potentially worrisome uncertainties, arising from math- ematical formulation alone, which modelers can inadvertently introduce into models of complex systems. Acknowledgements This work has been funded under early-career LDRD project %23170979, entitled %22Quantify- ing Confidence in Complex Systems Models Having Structural Uncertainties%22, which ran from 04/2013 to 09/2014. We wish to express our gratitude to the many researchers at Sandia who con- tributed ideas to this work, as well as feedback on the manuscript. In particular, we would like to mention George Barr, Alexander Outkin, Walt Beyeler, Eric Vugrin, and Laura Swiler for provid- ing invaluable advice and guidance through the course of the project. We would also like to thank Steven Kleban, Amanda Gonzales, Trevor Manzanares, and Sarah Burwell for their assistance in managing project tasks and resources.

  19. A brief comparison between grid based real space algorithms andspectrum algorithms for electronic structure calculations

    SciTech Connect (OSTI)

    Wang, Lin-Wang

    2006-12-01

    Quantum mechanical ab initio calculation constitutes the biggest portion of the computer time in material science and chemical science simulations. As a computer center like NERSC, to better serve these communities, it will be very useful to have a prediction for the future trends of ab initio calculations in these areas. Such prediction can help us to decide what future computer architecture can be most useful for these communities, and what should be emphasized on in future supercomputer procurement. As the size of the computer and the size of the simulated physical systems increase, there is a renewed interest in using the real space grid method in electronic structure calculations. This is fueled by two factors. First, it is generally assumed that the real space grid method is more suitable for parallel computation for its limited communication requirement, compared with spectrum method where a global FFT is required. Second, as the size N of the calculated system increases together with the computer power, O(N) scaling approaches become more favorable than the traditional direct O(N{sup 3}) scaling methods. These O(N) methods are usually based on localized orbital in real space, which can be described more naturally by the real space basis. In this report, the author compares the real space methods versus the traditional plane wave (PW) spectrum methods, for their technical pros and cons, and the possible of future trends. For the real space method, the author focuses on the regular grid finite different (FD) method and the finite element (FE) method. These are the methods used mostly in material science simulation. As for chemical science, the predominant methods are still Gaussian basis method, and sometime the atomic orbital basis method. These two basis sets are localized in real space, and there is no indication that their roles in quantum chemical simulation will change anytime soon. The author focuses on the density functional theory (DFT), which is the most used method for quantum mechanical material science simulation.

  20. Thermodynamic analysis of a possible CO{sub 2}-laser plant included in a heat engine cycle

    SciTech Connect (OSTI)

    Bisio, G.; Rubatto, G.

    1998-07-01

    In these last years, several plants have been realized in some industrialized countries to recover pressure exergy from various fluids. That has been done by means of suitable turbines in particular for blast-furnace top gas and natural gas. Various papers have examined the topic, considering pros and cons. High-power CO{sub 2}-lasers are being more and more widely used for welding, drilling and cutting in machine shops. In the near future different kinds of metal surface treatments will probably become routine practice with laser units. The industries benefiting most from high power lasers will be: the automotive industry, shipbuilding, the offshore industry, the aerospace industry, the nuclear and the chemical processing industries. Both degradation and cooling problems may be alleviated by allowing the gas to flow through the laser tube and by reducing its pressure outside this tube. Thus, a thermodynamic analysis on high-power CO{sub 2}-lasers with particular reference to a possible energy recovery is justified. In previous papers the critical examination of the concept of efficiency has led one of the present authors to the definition of an operational domain in which the process can be achieved. This domain is confined by regions of no entropy production (upper limit) and no useful effects (lower limit). On the basis of these concepts and of what has been done for pressure exergy recovery from other fluids, exergy investigations and an analysis of losses are performed for a cyclic process including a high performance CO2 laser. Thermodynamic analysis of flow processes in a CO{sub 2}-laser plant shows that the inclusion of a turbine in this plant allows us to recover the most part of the exergy necessary for the compressor; in addition, the water consumption for the refrigeration in the heat exchanger is reduced.

  1. Numerical recipes for mold filling simulation

    SciTech Connect (OSTI)

    Kothe, D.; Juric, D.; Lam, K.; Lally, B.

    1998-07-01

    Has the ability to simulate the filling of a mold progressed to a point where an appropriate numerical recipe achieves the desired results? If results are defined to be topological robustness, computational efficiency, quantitative accuracy, and predictability, all within a computational domain that faithfully represents complex three-dimensional foundry molds, then the answer unfortunately remains no. Significant interfacial flow algorithm developments have occurred over the last decade, however, that could bring this answer closer to maybe. These developments have been both evolutionary and revolutionary, will continue to transpire for the near future. Might they become useful numerical recipes for mold filling simulations? Quite possibly. Recent progress in algorithms for interface kinematics and dynamics, linear solution methods, computer science issues such as parallelization and object-oriented programming, high resolution Navier-Stokes (NS) solution methods, and unstructured mesh techniques, must all be pursued as possible paths toward higher fidelity mold filling simulations. A detailed exposition of these algorithmic developments is beyond the scope of this paper, hence the authors choose to focus here exclusively on algorithms for interface kinematics. These interface tracking algorithms are designed to model the movement of interfaces relative to a reference frame such as a fixed mesh. Current interface tracking algorithm choices are numerous, so is any one best suited for mold filling simulation? Although a clear winner is not (yet) apparent, pros and cons are given in the following brief, critical review. Highlighted are those outstanding interface tracking algorithm issues the authors feel can hamper the reliable modeling of today`s foundry mold filling processes.

  2. Development of Quality Assessment Techniques for Large Eddy Simulation of Propulsion and Power Systems in Complex Geometries

    SciTech Connect (OSTI)

    Lacaze, Guilhem; Oefelein, Joseph

    2015-03-01

    Large-eddy-simulation (LES) is quickly becoming a method of choice for studying complex thermo-physics in a wide range of propulsion and power systems. It provides a means to study coupled turbulent combustion and flow processes in parameter spaces that are unattainable using direct-numerical-simulation (DNS), with a degree of fidelity that can be far more accurate than conventional engineering methods such as the Reynolds-averaged Navier-Stokes (RANS) approx- imation. However, development of predictive LES is complicated by the complex interdependence of different type of errors coming from numerical methods, algorithms, models and boundary con- ditions. On the other hand, control of accuracy has become a critical aspect in the development of predictive LES for design. The objective of this project is to create a framework of metrics aimed at quantifying the quality and accuracy of state-of-the-art LES in a manner that addresses the myriad of competing interdependencies. In a typical simulation cycle, only 20% of the computational time is actually usable. The rest is spent in case preparation, assessment, and validation, because of the lack of guidelines. This work increases confidence in the accuracy of a given solution while min- imizing the time obtaining the solution. The approach facilitates control of the tradeoffs between cost, accuracy, and uncertainties as a function of fidelity and methods employed. The analysis is coupled with advanced Uncertainty Quantification techniques employed to estimate confidence in model predictions and calibrate model's parameters. This work has provided positive conse- quences on the accuracy of the results delivered by LES and will soon have a broad impact on research supported both by the DOE and elsewhere.

  3. ALTERNATIVES ANALYSIS FOR SELECTING ET #3 SITE

    SciTech Connect (OSTI)

    Collard, L.; Hamm, L.

    2012-02-13

    Engineered trenches (ETs) are considered to be a cost-effective method for disposing Low Level Waste (LLW). Based on waste forecasts from waste generators, the last engineered trench in operation (ET No.2) is anticipated to close in FY14, requiring development of a new ET. Solid Waste requested that SRNL develop an assessment report that reviews four disposal options for this new ET (ET No.3) and determine which option would provide the 'best' Performance Assessment (PA) disposal limits for LLW (Appendix A). Those four options (see option footprint locations in Figure 1-1) are: (1) Disposal at grade on TRU Pads 7-13 where soil would be mounded over waste packages; (2) Excavation at a slightly modified SLIT No.13 location - near the Used Equipment Storage Area; (3) Excavation at a modified SLIT No.12 location - near the 643-26E Naval Reactor Component Disposal Area; and (4) Excavation east of TRU Pad No.26 that replaces northeast portions of four slit trench (ST) disposal units in the eastern set of STs. The assessment consisted of both quantitative and qualitative analyses. The quantitative analysis captured key aspects that were readily quantifiable and had predictable impacts on limits and doses. A simplified modeling strategy stemming from current Special Analysis (SA) practices was employed. Both inventory capacity for a specific nuclide (a quasi-inventory limit) and overall performance for specified inventory mixtures (doses resulting from historical inventories) were considered. The qualitative analysis evaluated other key aspects based on engineering judgment in the form of pros and cons.

  4. STP-ECRTS - THERMAL AND GAS ANALYSES FOR SLUDGE TRANSPORT AND STORAGE CONTAINER (STSC) STORAGE AT T PLANT

    SciTech Connect (OSTI)

    CROWE RD; APTHORPE R; LEE SJ; PLYS MG

    2010-04-29

    The Sludge Treatment Project (STP) is responsible for the disposition of sludge contained in the six engineered containers and Settler tank within the 105-K West (KW) Basin. The STP is retrieving and transferring sludge from the Settler tank into engineered container SCS-CON-230. Then, the STP will retrieve and transfer sludge from the six engineered containers in the KW Basin directly into a Sludge Transport and Storage Containers (STSC) contained in a Sludge Transport System (STS) cask. The STSC/STS cask will be transported to T Plant for interim storage of the STSC. The STS cask will be loaded with an empty STSC and returned to the KW Basin for loading of additional sludge for transportation and interim storage at T Plant. CH2MHILL Plateau Remediation Company (CHPRC) contracted with Fauske & Associates, LLC (FAI) to perform thermal and gas generation analyses for interim storage of STP sludge in the Sludge Transport and Storage Container (STSCs) at T Plant. The sludge types considered are settler sludge and sludge originating from the floor of the KW Basin and stored in containers 210 and 220, which are bounding compositions. The conditions specified by CHPRC for analysis are provided in Section 5. The FAI report (FAI/10-83, Thermal and Gas Analyses for a Sludge Transport and Storage Container (STSC) at T Plant) (refer to Attachment 1) documents the analyses. The process considered was passive, interim storage of sludge in various cells at T Plant. The FATE{trademark} code is used for the calculation. The results are shown in terms of the peak sludge temperature and hydrogen concentrations in the STSC and the T Plant cell. In particular, the concerns addressed were the thermal stability of the sludge and the potential for flammable gas mixtures. This work was performed with preliminary design information and a preliminary software configuration.

  5. Sacramento Municipal Utility District PV and Smart Grid Pilot at Anatolia

    SciTech Connect (OSTI)

    Rawson, Mark; Sanchez, Eddie Paul

    2013-12-30

    Under DE-FOA-0000085 High Penetration Solar Deployment, the U. S. Department of Energy funded agreements with SMUD and Navigant Consulting, SunPower, GridPoint, the National Renewable Energy Laboratory, and the California Energy Commission for this pilot demonstration project. Funding was $5,962,409.00. Cost share of $500,000 was also provided by the California Energy Commission. The project has strategic implications for SMUD, other utilities and the PV and energy-storage industries in business and resource planning, technology deployment and asset management. These implications include: -At this point, no dominant business models have emerged and the industry is open for new ideas. -Demonstrated two business models for using distributed PV and energy storage, and brainstormed several dozen more, each with different pros and cons for SMUD, its customers and the industry. -Energy storage can be used to manage high penetrations of PV and mitigate potential issues such as reverse power flow, voltage control violations, power quality issues, increased wear and tear on utility equipment, and system wide power supply issues. - Smart meters are another tool utilities can use to manage high penetrations of PV. The necessary equipment and protocols exist, and the next step is to determine how to integrate the functionality with utility programs and what level of utility control is required. - Time-of-use rates for the residential customers who hosted energy storage systems did not cause a significant change in energy usage patterns. However, the rates we used were not optimized for PV and energy storage. Opportunities exist for utilities to develop new structures.

  6. Survey of the degradation modes of candidate materials for high-level radioactive waste disposal containers

    SciTech Connect (OSTI)

    Vinson, D.W.; Nutt, W.M.; Bullen, D.B.

    1995-06-01

    Oxidation and atmospheric corrosion data suggest that addition of Cr provides the greatest improvement in oxidation resistance. Cr-bearing cast irons are resistant to chloride environments and solutions containing strongly oxidizing constituents. Weathering steels, including high content and at least 0.04% Cu, appear to provide adequate resistance to oxidation under temperate conditions. However, data from long-term, high-temperature oxidation studies on weathering steels were not available. From the literature, it appears that the low alloy steels, plain carbon steels, cast steels, and cast irons con-ode at similar rates in an aqueous environment. Alloys containing more than 12% Cr or 36% Ni corrode at a lower rate than plain carbon steels, but pitting may be worse. Short term tests indicate that an alloy of 9Cr-1Mo may result in increased corrosion resistance, however long term data are not available. Austenitic cast irons show the best corrosion resistance. A ranking of total corrosion performance of the materials from most corrosion resistant to least corrosion resistant is: Austenitic Cast Iron; 12% Cr = 36% Ni = 9Cr-1Mo; Carbon Steel = Low Alloy Steels; and Cast Iron. Since the materials to be employed in the Advanced Conceptual Design (ACD) waste package are considered to be corrosion allowance materials, the austenitic cast irons, high Cr steels, high Ni steels and the high Cr-Mo steels should not be considered as candidates for the outer containment barrier. Based upon the oxidation and corrosion data available for carbon steels, low alloy steels, and cast irons, a suitable list of candidate materials for a corrosion allowance outer barrier for an ACD waste package could include, A516, 2.25%Cr -- 1%Mo Steel, and A27.

  7. Cogeneration trends in Europe history -- State of the art - Outlook

    SciTech Connect (OSTI)

    Hunschofsky, H.

    1998-07-01

    Cogeneration, the utilization of heat created while producing electricity from fossil fuels, is by no means a new technology. In 1926, 71 years ago, a brochure from MAN in Germany showed a heat recovery system for diesel engines. Despite the fact that cogeneration has existed for a long time, it took half a century and the first so called ``oil crisis'' in the 1970's for societies to become aware of limited energy resources. Environmental groups gave cogeneration an additional boost in the 1980's. Additionally, governments in the Western European Nations attracted cogeneration investors by not only providing subsidies and tax breaks but also regulating electricity prices. Although there has been much growth in the cogeneration market in the past years, the industry has still not reached its peak in Europe. A variety of studies have shown that there is still significant growth potential in the future: WWF (World Wildlife Fund) published a study in 1996 suggesting a target of 330 Twh of generation will be produced through cogeneration by the year 2005, a tripling of current generation. Due to the EU's belief that cogeneration is an optimal form of generation, it has developed a cogeneration strategy. As part of this strategy, the EC is promoting cogeneration so that it accounts for 20% of all European generation by the year 2010. These factors would give a variety of companies such as equipment suppliers, investment companies, utilities, consultants and energy brokers a wide range of opportunities in Europe. Detailed information and some hints will be given as to how to participate in this fast growing industry. Ways to overcome obstacles in those markets will be shown as well as the pros and cons of different entry strategies.

  8. A Nonlocal Peridynamic Plasticity Model for the Dynamic Flow and Fracture of Concrete.

    SciTech Connect (OSTI)

    Vogler, Tracy; Lammi, Christopher James

    2014-10-01

    A nonlocal, ordinary peridynamic constitutive model is formulated to numerically simulate the pressure-dependent flow and fracture of heterogeneous, quasi-brittle ma- terials, such as concrete. Classical mechanics and traditional computational modeling methods do not accurately model the distributed fracture observed within this family of materials. The peridynamic horizon, or range of influence, provides a characteristic length to the continuum and limits localization of fracture. Scaling laws are derived to relate the parameters of peridynamic constitutive model to the parameters of the classical Drucker-Prager plasticity model. Thermodynamic analysis of associated and non-associated plastic flow is performed. An implicit integration algorithm is formu- lated to calculate the accumulated plastic bond extension and force state. The gov- erning equations are linearized and the simulation of the quasi-static compression of a cylinder is compared to the classical theory. A dissipation-based peridynamic bond failure criteria is implemented to model fracture and the splitting of a concrete cylinder is numerically simulated. Finally, calculation of the impact and spallation of a con- crete structure is performed to assess the suitability of the material and failure models for simulating concrete during dynamic loadings. The peridynamic model is found to accurately simulate the inelastic deformation and fracture behavior of concrete during compression, splitting, and dynamically induced spall. The work expands the types of materials that can be modeled using peridynamics. A multi-scale methodology for simulating concrete to be used in conjunction with the plasticity model is presented. The work was funded by LDRD 158806.

  9. Decision making, procedural compliance, and outcomes definition in U.S. forest service planning processes

    SciTech Connect (OSTI)

    Stern, Marc J.; Predmore, S. Andrew

    2011-04-15

    The National Environmental Policy Act (NEPA) dictates a process of analyzing and disclosing the likely impacts of proposed agency actions on the human environment. This study addresses two key questions related to NEPA implementation in the U.S. Forest Service: 1) how do Interdisciplinary (ID) team leaders and decision makers conceptualize the outcomes of NEPA processes? And 2), how does NEPA relate to agency decision making? We address these questions through two separate online surveys that posed questions about recently completed NEPA processes - the first with the ID team leaders tasked with carrying out the processes, and the second with the line officers responsible for making the processes' final decisions. Outcomes of NEPA processes include impacts on public relations, on employee morale and team functioning, on the achievement of agency goals, and on the achievement of NEPA's procedural requirements (disclosure) and substantive intent (minimizing negative environmental impacts). Although both tended to view public relations outcomes as important, decision makers' perceptions of favorable outcomes were more closely linked to the achievement of agency goals and process efficiency than was the case for ID team leaders. While ID team leaders' responses suggest that they see decision making closely integrated with the NEPA process, decision makers more commonly decoupled decision making from the NEPA process. These findings suggest a philosophical difference between ID team leaders and decision makers that may pose challenges for both the implementation and the evaluation of agency NEPA. We discuss the pros and cons of integrating NEPA with decision making or separating the two. We conclude that detaching NEPA from decision making poses greater risks than integrating them.

  10. Annual Report 1998: Chemical Structure and Dynamics

    SciTech Connect (OSTI)

    SD Colson; RS McDowell

    1999-05-10

    The Chemical Structure and Dynamics (CS&D) program is a major component of the William R. Wiley Environmental Molecular Sciences Labo- ratory (EMSL), developed by Pacific Northwest National Laboratory (PNNL) to provide a state-of- the-art collaborative facility for studies of chemical structure and dynamics. We respond to the need for a fundamental, molecular-level understanding of chemistry at a wide variety of environmentally important interfaces by (1) extending the experimental characterization and theoretical description of chemical reactions to encompass the effects of condensed media and interfaces; (2) developing a multidisciplinary capability for describing interracial chemical processes within which the new knowledge generated can be brought to bear on complex phenomena in envi- ronmental chemistry and in nuclear waste proc- essing and storage; and (3) developing state-of- the-art analytical methods for characterizing com- plex materials of the types found in stored wastes and contaminated soils, and for detecting and monitoring trace atmospheric species. Our program aims at achieving a quantitative understanding of chemical reactions at interfaces and, more generally, in condensed media, compa- rable to that currently available for gas-phase reactions. This understanding will form the basis for the development of a priori theories for pre- dicting macroscopic chemical behavior in con- densed and heterogeneous media, which will add significantly to the value of field-scale envi- ronmental models, predictions of short- and long- term nuclear waste storage stabilities, and other areas related to the primary missions of the U.S. Department of Energy (DOE).

  11. HybridStore: A Cost-Efficient, High-Performance Storage System Combining SSDs and HDDs

    SciTech Connect (OSTI)

    Kim, Youngjae; Gupta, Aayush; Urgaonkar, Bhuvan; Piotr, Berman; Sivasubramaniam, Anand

    2011-01-01

    Unlike the use of DRAM for caching or buffering, certain idiosyncrasies of NAND Flash-based solid-state drives (SSDs) make their integration into existing systems non-trivial. Flash memory suffers from limits on its reliability, is an order of magnitude more expensive than the magnetic hard disk drives (HDDs), and can sometimes be as slow as the HDD (due to excessive garbage collection (GC) induced by high intensity of random writes). Given these trade-offs between HDDs and SSDs in terms of cost, performance, and lifetime, the current consensus among several storage experts is to view SSDs not as a replacement for HDD but rather as a complementary device within the high-performance storage hierarchy. We design and evaluate such a hybrid system called HybridStore to provide: (a) HybridPlan: improved capacity planning technique to administrators with the overall goal of operating within cost-budgets and (b) HybridDyn: improved performance/lifetime guarantees during episodes of deviations from expected workloads through two novel mechanisms: write-regulation and fragmentation busting. As an illustrative example of HybridStore s ef cacy, HybridPlan is able to nd the most cost-effective storage con guration for a large scale workload of Microsoft Research and suggest one MLC SSD with ten 7.2K RPM HDDs instead of fourteen 7.2K RPM HDDs only. HybridDyn is able to reduce the average response time for an enterprise scale random-write dominant workload by about 71% as compared to a HDD-based system.

  12. Technical Note: On the Use of Nudging for Aerosol-Climate Model Intercomparison Studies

    SciTech Connect (OSTI)

    Zhang, Kai; Wan, Hui; Liu, Xiaohong; Ghan, Steven J.; Kooperman, G. J.; Ma, Po-Lun; Rasch, Philip J.; Neubauer, David; Lohmann, U.

    2014-08-26

    Nudging is an assimilation technique widely used in the development and evaluation of climate models. Con- straining the simulated wind and temperature fields using global weather reanalysis facilitates more straightforward comparison between simulation and observation, and reduces uncertainties associated with natural variabilities of the large-scale circulation. On the other hand, the artificial forcing introduced by nudging can be strong enough to change the basic characteristics of the model climate. In the paper we show that for the Community Atmosphere Model version 5, due to the systematic temperature bias in the standard model and the relatively strong sensitivity of homogeneous ice nucleation to aerosol concentration, nudging towards reanalysis results in substantial reductions in the ice cloud amount and the impact of anthropogenic aerosols on longwave cloud forcing. In order to reduce discrepancies between the nudged and unconstrained simulations and meanwhile take the advantages of nudging, two alternative experimentation methods are evaluated. The first one constrains only the horizontal winds. The second method nudges both winds and temperature, but replaces the long-term climatology of the reanalysis by that of the model. Results show that both methods lead to substantially improved agreement with the free-running model in terms of the top-of-atmosphere radiation budget and cloud ice amount. The wind-only nudging is more convenient to apply, and provides higher correlations of the wind fields, geopotential height and specific humidity between simulation and reanalysis. This suggests that nudging the horizontal winds but not temperature is a good strategy, especially for studies that involve both warm and cold clouds.

  13. Next-generation Algorithms for Assessing Infrastructure Vulnerability and Optimizing System Resilience

    SciTech Connect (OSTI)

    Burchett, Deon L.; Chen, Richard Li-Yang; Phillips, Cynthia A.; Richard, Jean-Philippe

    2015-05-01

    This report summarizes the work performed under the project project Next-Generation Algo- rithms for Assessing Infrastructure Vulnerability and Optimizing System Resilience. The goal of the project was to improve mathematical programming-based optimization technology for in- frastructure protection. In general, the owner of a network wishes to design a network a network that can perform well when certain transportation channels are inhibited (e.g. destroyed) by an adversary. These are typically bi-level problems where the owner designs a system, an adversary optimally attacks it, and then the owner can recover by optimally using the remaining network. This project funded three years of Deon Burchett's graduate research. Deon's graduate advisor, Professor Jean-Philippe Richard, and his Sandia advisors, Richard Chen and Cynthia Phillips, supported Deon on other funds or volunteer time. This report is, therefore. essentially a replication of the Ph.D. dissertation it funded [12] in a format required for project documentation. The thesis had some general polyhedral research. This is the study of the structure of the feasi- ble region of mathematical programs, such as integer programs. For example, an integer program optimizes a linear objective function subject to linear constraints, and (nonlinear) integrality con- straints on the variables. The feasible region without the integrality constraints is a convex polygon. Careful study of additional valid constraints can significantly improve computational performance. Here is the abstract from the dissertation: We perform a polyhedral study of a multi-commodity generalization of variable upper bound flow models. In particular, we establish some relations between facets of single- and multi- commodity models. We then introduce a new family of inequalities, which generalizes traditional flow cover inequalities to the multi-commodity context. We present encouraging numerical results. We also consider the directed edge-failure resilient network design problem (DRNDP). This problem entails the design of a directed multi-commodity flow network that is capable of fulfilling a specified percentage of demands in the event that any G arcs are destroyed, where G is a constant parameter. We present a formulation of DRNDP and solve it in a branch-column-cut framework. We present computational results.

  14. Energy-Efficiency Labels and Standards: A Guidebook forAppliances, Equipment, and Lighting - 2nd Edition

    SciTech Connect (OSTI)

    Wiel, Stephen; McMahon, James E.

    2005-04-28

    Energy-performance improvements in consumer products are an essential element in any government's portfolio of energy-efficiency and climate change mitigation programs. Governments need to develop balanced programs, both voluntary and regulatory, that remove cost-ineffective, energy-wasting products from the marketplace and stimulate the development of cost-effective, energy-efficient technology. Energy-efficiency labels and standards for appliances, equipment, and lighting products deserve to be among the first policy tools considered by a country's energy policy makers. The U.S. Agency for International Development (USAID) and several other organizations identified on the cover of this guidebook recognize the need to support policy makers in their efforts to implement energy-efficiency standards and labeling programs and have developed this guidebook, together with the Collaborative Labeling and Appliance Standards Program (CLASP), as a primary reference. This second edition of the guidebook was prepared over the course of the past year, four years after the preparation of the first edition, with a significant contribution from the authors and reviewers mentioned previously. Their diligent participation helps maintain this book as the international guidance tool it has become. The lead authors would like to thank the members of the Communications Office of the Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory for their support in the development, production, and distribution of the guidebook. This guidebook is designed as a manual for government officials and others around the world responsible for developing, implementing, enforcing, monitoring, and maintaining labeling and standards setting programs. It discusses the pros and cons of adopting energy-efficiency labels and standards and describes the data, facilities, and institutional and human resources needed for these programs. It provides guidance on the design, development, implementation, maintenance, and evaluation of the programs and on the design of the labels and standards themselves. In addition, it directs the reader to references and other resources likely to be useful in conducting the activities described and includes a chapter on energy policies and programs that complement appliance efficiency labels and standards. This guidebook attempts to reflect the essential framework of labeling and standards programs. It is the intent of the authors and sponsor to distribute copies of this book worldwide, at no charge, for the general public benefit. The guidebook is also available on the web at www.clasponline.org and may be downloaded to be used intact or piecemeal for whatever beneficial purposes readers may conceive.

  15. Magnetism of Co doped ZnO with Al codoping: carrier induced mechanisms versus extrinsic origins

    SciTech Connect (OSTI)

    Ney, A.; Ney, V.; Ye, S.; Ollefs, K.; Kammermeier, T.; Kaspar, Tiffany C.; Chambers, Scott A.; Wilhelm, F.; Rogalev, A.

    2010-07-23

    Dilute magnetic semiconductors (DMS) which exhibit ferromagnetism (FM) at and above room temperature are a highly desirable class of materials for future spin- tronics devices. Zn1?xCoxO (Co:ZnO) is a heavily studied DMS material in this context. Although controversially discussed in the literature, there is a growing con- sensus, that phase-pure Co:ZnO is paramagnetic (PM)[13]. Altering the preparation conditions can easily lead to phase separation and consequently superparam- agnetism (SPM) [3]. Nonetheless there are recent experimental data claiming that FM can be switched on inCo:ZnO by controlling the carrier concentration [4]. On the other hand, no FM was found in structurally excellent Al-codoped Co:ZnO [5]. However, in the latter work the magnetic characterization was restricted to room temperature measurements. In parallel, theory has also revealed that defect-free, insulating Co:ZnO is not ferromagnetic [6, 7] whereas the role of n-type carriers remains under debate, ranging from ferromagnetic coupling [8], or oscil- latory behavior with Co-Co distance [9] to antiferromagnetic coupling [10]. It is rather common to manipulate the n-type carrier concentration of ZnO by Al-doping to yield high conductivity [4, 11]. On the other hand, it had been shown that Al-codoping of Co:ZnO may promote the onset of phase separation [11]. It is extremely difficult to detect such secondary Co-containing phases even with the most careful x-ray diffraction (XRD) analysis [11, 12] or depth-profiling photoelectron spectroscopy (DP-XPS) [13]. Such careful materials characterization is lacking in Ref. [4]. An alternative to extensive XRD or DP-XPS to look for potential phase separation in Co:ZnO is the combination of x-ray absorption near edge spectra (XANES), x-ray linear dichroism (XLD), and x-ray magnetic circular dichroism (XMCD). This suite of atom-specific x-ray spectroscopies nicely complements integral superconducting quantum interference device (SQUID) magnetometry. For example, combined XLD simulations and experiments at the Co K-edge have been used to verify the phase purity of Co:ZnO [2] and characteristic spectroscopic signatures with appropriate quality thresholds for PM and SPM have been identified recently in the XANES and XMCD at the Co K-edge of Co:ZnO [3]. Along the same line, a careful combination of XANES and extended x-ray absorption fine structure (EXAFS) was employed to study Co:ZnO films similar to those in [4] which found evidence for Co(0) secondary phases [14].

  16. Renewable source controls for grid stability.

    SciTech Connect (OSTI)

    Byrne, Raymond Harry; Elliott, Ryan Thomas; Neely, Jason C.; Silva Monroy, Cesar Augusto; Schoenwald, David Alan; Grant, Lisa

    2012-12-01

    The goal of this study was to evaluate the small signal and transient stability of the Western Electric- ity Coordinating Council (WECC) under high penetrations of renewable energy, and to identify control technologies that would improve the system performance. The WECC is the regional entity responsible for coordinating and promoting bulk electric system reliability in the Western Interconnection. Transient stability is the ability of the power system to maintain synchronism after a large disturbance while small signal stability is the ability of the power system to maintain synchronism after a small disturbance. Tran- sient stability analysis usually focuses on the relative rotor angle between synchronous machines compared to some stability margin. For this study we employed generator speed relative to system speed as a metric for assessing transient stability. In addition, we evaluated the system transient response using the system frequency nadir, which provides an assessment of the adequacy of the primary frequency control reserves. Small signal stability analysis typically identi es the eigenvalues or modes of the system in response to a disturbance. For this study we developed mode shape maps for the di erent scenarios. Prony analysis was applied to generator speed after a 1.4 GW, 0.5 second, brake insertion at various locations. Six di erent WECC base cases were analyzed, including the 2022 light spring case which meets the renewable portfolio standards. Because of the di culty in identifying the cause and e ect relationship in large power system models with di erent scenarios, several simulations were run on a 7-bus, 5-generator system to isolate the e ects of di erent con gurations. Based on the results of the study, for a large power system like the WECC, incorporating frequency droop into wind/solar systems provides a larger bene t to system transient response than replacing the lost inertia with synthetic inertia. From a small signal stability perspective, the increase in renewable penetration results in subtle changes to the system modes. In gen- eral, mode frequencies increase slightly, and mode shapes remain similar. The system frequency nadir for the 2022 light spring case was slightly lower than the other cases, largely because of the reduced system inertia. However, the nadir is still well above the minimum load shedding frequency of 59.5 Hz. Finally, several discrepancies were identi ed between actual and reported wind penetration, and additional work on wind/solar modeling is required to increase the delity of the WECC models.

  17. The influence of deep-seabed CO2 sequestration on small metazoan (meiofaunal) viability and community structure: final technical report

    SciTech Connect (OSTI)

    Thistle, D

    2008-09-30

    Since the industrial revolution, the burning of fossil fuel has produced carbon dioxide at an increasing rate. Present atmospheric concentration is about ~1.5 times the preindustrial level and is rising. Because carbon dioxide is a greenhouse gas, its increased concentration in the atmosphere is thought to be a cause of global warming. If so, the rate of global warming could be slowed if industrial carbon dioxide were not released into the atmosphere. One suggestion has been to sequester it in the deep ocean, but theory predicts that deep-sea species will be intolerant of the increased concentrations of carbon dioxide and the increased acidity it would cause. The aim of our research was to test for consequences of carbon dioxide sequestration on deep-sea, sediment-dwelling meiofauna. Recent technical advances allowed us to test for effects in situ at depths proposed for sequestration. The basic experimental unit was an open-topped container into which we pumped ~20 L of liquid carbon dioxide. The liquid carbon dioxide mixed with near-bottom sea water, which produced carbon dioxide-rich sea water that flowed out over the near-by seabed. We did 30-day experiments at several locations and with different numbers of carbon dioxide-filled containers. Harpacticoid copepods (Crustacea) were our test taxon. In an experiment we did during a previous grant period, we found that large numbers of individuals exposed to carbon dioxide-rich sea water had been killed (Thistle et al. 2004). During the present grant period, we analyzed the species-level data in greater detail and discovered that, although individuals of many species had been killed by exposure to carbon dioxide-rich sea water, individuals of some species had not (Thistle et al. 2005). This result suggests that seabed sequestration of carbon dioxide will not just reduce the abundance of the meiofauna but will change the composition of the community. In another experiment, we found that some harpacticoid species swim away from an advancing front of carbon dioxide-rich sea water (Thistle et al. 2007). This result demonstrates a second way that deep-sea meiofauna react negatively to carbon dioxide-rich sea water. In summary, we used in situ experiments to show that carbon dioxide-rich sea water triggers an escape response in some harpacticoid species. It kills most individuals of most harpacticoid species that do not flee, but a few species seem to be unaffected. Proposals to reduce global warming by sequestering industrial carbon dioxide in the deep ocean should take note of these environmental consequences when pros and cons are weighed.

  18. REDUCTIONS WITHOUT REGRET: HISTORICAL PERSPECTIVES

    SciTech Connect (OSTI)

    Swegle, J.; Tincher, D.

    2013-09-09

    This is the first of three papers (in addition to an introductory summary) aimed at providing a framework for evaluating future reductions or modifications of the U.S. nuclear force, first by considering previous instances in which nuclear-force capabilities were eliminated; second by looking forward into at least the foreseeable future at the features of global and regional deterrence (recognizing that new weapon systems currently projected will have expected lifetimes stretching beyond our ability to predict the future); and third by providing examples of past or possible undesirable outcomes in the shaping of the future nuclear force, as well as some closing thoughts for the future. This paper examines the circumstances and consequences of the elimination of � The INF-range Pershing II ballistic missile and Gryphon Ground-Launched Cruise Missile (GLCM), deployed by NATO under a dual-track strategy to counter Soviet intermediate-range missiles while pursuing negotiations to limit or eliminate all of these missiles. � The Short-Range Attack Missile (SRAM), which was actually a family of missiles including SRAM A, SRAM B (never deployed), and SRAM II and SRAM T, these last two cancelled during an over-budget/behind-schedule development phase as part of the Presidential Nuclear Initiatives of 1991 and 1992. � The nuclear-armed version of the Tomahawk Land-Attack Cruise Missile (TLAM/N), first limited to shore-based storage by the PNIs, and finally eliminated in deliberations surrounding the 2010 Nuclear Posture Review Report. � The Missile-X (MX), or Peacekeeper, a heavy MIRVed ICBM, deployed in fixed silos, rather than in an originally proposed mobile mode. Peacekeeper was likely intended as a bargaining chip to facilitate elimination of Russian heavy missiles. The plan failed when START II did not enter into force, and the missiles were eliminated at the end of their intended service life. � The Small ICBM (SICBM), or Midgetman, a road-mobile, single-warhead missile for which per-unit costs were climbing when it was eliminated under the PNIs. Although there were liabilities associated with each of these systems, there were also unique capabilities; this paper lays out the pros and cons for each. Further, we articulate the capabilities that were eliminated with these systems.

  19. The Nuclear Energy Option for the U.S.--How Far Are We from Public Acceptance?

    SciTech Connect (OSTI)

    Biedscheid, J.A.; Devarakonda, M.

    2004-10-03

    The recent rise of oil and gasoline prices accompanied by reluctant acknowledgement that traditional sources of energy are limited has renewed public interest in renewable energy sources. This perspective on energy is focusing attention on and facilitating acceptance of alternative energy concepts, such as solar, wind, and biomass. The nuclear energy alternative, while clean with potentially abundant fuel supplies and associated with low costs, is burdened with the frequently negative public opinion reserved for things nuclear. Coincident with the heightened examination of alternative energy concepts, 2004 marks the 25-year anniversary of the Three Mile Island accident. Since this pivotal accident in 1979, no new reactor licenses have been granted in the U.S. The resolution of the issues of nuclear waste management and disposition are central to and may advance public discussions of the future use of nuclear energy. The U.S. Department of Energy (DOE) is currently preparing the licensing application for Yucca Mountain, which was designated in 2003 as the site for a high-level waste and spent nuclear fuel repository in the U.S. The DOE also has been operating a deep geologic repository for the permanent disposal of transuranic (TRU) waste since 1999. The operational status of the Waste Isolation Pilot Plant (WIPP) as a repository for TRU waste was successfully realized along with the lesson learned that stakeholder trust and acceptance are as critical to the success of a repository program as the resolution of technical issues and obtaining regulatory approvals. For the five years of its operation and for decades prior, the challenge of attaining public acceptance of the WIPP has persisted for reasons aligned with the opposition to nuclear energy. Due to this commonality, the nuclear waste approach to public acceptance, with its pros and cons, provides a baseline for the examination of an approach for the public acceptance of nuclear energy in the U.S. This paper will present these concepts and discuss the future of nuclear energy in the U.S. in light of the challenge of gaining public acceptance.

  20. Options To Cleanup Site-wide Vadose Zone Contamination At The Hanford Site, WA, State

    SciTech Connect (OSTI)

    Goswami, D. [Ph.D, and John Price, Nuclear Waste Program, Washington State Department of Ecology, Richland, WA (United States)

    2008-07-01

    The U.S. Department of Energy (DOE) Hanford Site in south central Washington State lies along the Columbia River and is one of DOE's largest legacy waste management sites. Enormous radionuclide and chemical inventories exist below-ground. These include Resource Conservation and Recovery Act (RCRA) storage facilities where hazardous and radioactive contaminants were discharged and leaked to the soil surface and to the deep vadose zone and groundwater. The vadose zone is also contaminated from facilities regulated by the RCRA and Comprehensive Environmental Response Compensation and Liability Act (CERCLA) Act. Hanford now contains as much as 28,300 cubic meters of soil contaminated with radionuclides from liquid wastes released near processing facilities. The Hanford Federal Facility Agreement and Consent Order, Tri-Party Agreement (TPA) has set the completion of the cleanup of these sites by 2024. There are numerous technical and regulatory challenges to cleanup of the vadose zone at the Hanford site. This paper attempts to identify the categories of deep vadose zone problem and identifies a few possible regulatory options to clean up the site under the mix of state and federal regulatory authorities. There are four major categories of vadose contamination areas at the Hanford Site. The first is laterally extensive with intermediate depth (ground surface to about 45 meters depth) mostly related to high volume effluent discharge into cribs, ponds and ditches of designated CERCLA facilities. The second is dominated by laterally less extensive mostly related to leaks from RCRA tank farms. The later contamination is often commingled at depth with wastes from adjacent CERCLA facilities. The third category is from the high volume CERCLA facilities extending from the surface to more than 60 meters below ground. Contamination from the later category crosses the entire thickness of the vadose zone and reached groundwater. The fourth category is the lower volume waste sites. There are multiple management options to clean up the above four categories of vadose zones sites. The following are some of the options considered for detailed evaluation: - Maintain separate decision processes for each RCRA and CERCLA units/waste sites with a more accommodating schedule. - Create new vadose zone operable units with limited geographical boundaries regardless of site category/origin and make an integrated decision. - Expand the existing CERCLA groundwater operable units to include the deep vadose zone - Use a combination of the above. Each option has pros and cons and regulatory limitations. Detailed evaluation of these options is required to support a cost effective expedited cleanup. (authors)

  1. IMPROVEMENT TO PIPELINE COMPRESSOR ENGINE RELIABILITY THROUGH RETROFIT MICRO-PILOT IGNITION SYSTEM -- PHASE III

    SciTech Connect (OSTI)

    Scott Chase; Daniel Olsen; Ted Bestor

    2005-03-01

    This report documents the third year's effort towards a 3-year program conducted by the Engines & Energy Conversion Laboratory (EECL) at Colorado State University (CSU) to develop micropilot ignition systems for existing pipeline compressor engines. Research activities for the overall program were conducted with the understanding that the efforts are to result in a commercial product to capture and disseminate the efficiency and environmental benefits of this new technology. Commercially-available fuel injection products were identified and applied to the program where appropriate. This approach will minimize the overall time-to-market requirements, while meeting performance and cost criteria. Two earlier phases of development precede this report. The objective for Phase I was to demonstrate the feasibility of retrofit micropilot ignition (RMI) systems for large bore, slow speed engines operating at low compression ratios under laboratory conditions at the EECL. The objective for Phase II was to further develop and optimize the micropilot ignition system at the EECL for large bore, slow speed engines operating at low compression ratios. These laboratory results were enhanced, then verified via a field demonstration project during Phase III of the Micropilot Ignition program. An Implementation Team of qualified engine retrofit service providers was assembled to install the retrofit micropilot ignition system for an engine operated by El Paso Pipeline Group at a compressor station near Window Rock, Arizona. Testing of this demonstration unit showed that the same benefits identified by laboratory testing at CSU, i.e., reduced fuel consumption and exhaust emissions (NOx, THC, CO, and CH2O). Installation efforts at Window Rock were completed towards the end of the budget period, which did not leave sufficient time to complete the durability testing. These efforts are ongoing, with funding provided by El Paso Pipeline Group, and the results will be documented in a report. Commercialization of the retrofit micropilot ignition (RMI) technology is awaiting a ''market pull'', which is expected to materialize as the results of the field demonstration become known and accepted. The Implementation Team, comprised of Woodward Governor Company, Enginuity LLC, Hoerbiger Corporation of America, and DigiCon Inc., has direct experience with the technology development and implementation, and stands ready to promote and commercialize the RMI system.

  2. Energy-efficiency labels and standards: A guidebook for appliances, equipment and lighting

    SciTech Connect (OSTI)

    McMahon, James E.; Wiel, Stephen

    2001-02-16

    Energy-performance improvements in consumer products are an essential element in any government's portfolio of energy-efficiency and climate change mitigation programs. Governments need to develop balanced programs, both voluntary and regulatory, that remove cost-ineffective, energy-wasting products from the marketplace and stimulate the development of cost-effective, energy-efficient technology. Energy-efficiency labels and standards for appliances, equipment, and lighting products deserve to be among the first policy tools considered by a country's energy policy makers. The U.S. Agency for International Development (USAID) and the United Nations Foundation (UNF) recognize the need to support policy makers in their efforts to implement energy-efficiency standards and labeling programs and have developed this guidebook, together with the Collaborative Labeling and Appliance Standards Program (CLASP), as a primary reference. This guidebook was prepared over the course of the past year with significant contribution from the authors and reviewers mentioned previously. Their diligent participation has made this the international guidance tool it was intended to be. The lead authors would also like to thank the following individuals for their support in the development, production, and distribution of the guidebook: Marcy Beck, Elisa Derby, Diana Dhunke, Ted Gartner, and Julie Osborn of Lawrence Berkeley National Laboratory as well as Anthony Ma of Bevilacqua-Knight, Inc. This guidebook is designed as a manual for government officials and others around the world responsible for developing, implementing, enforcing, monitoring, and maintaining labeling and standards-setting programs. It discusses the pros and cons of adopting energy-efficiency labels and standards and describes the data, facilities, and institutional and human resources needed for these programs. It provides guidance on the design, development, implementation, maintenance, and evaluation of the programs and on the design of the labels and standards themselves. In addition, it directs the reader to references and other resources likely to be useful in conducting the activities described and includes a chapter on energy policies and programs that complement appliance efficiency labels and standards. This guidebook attempts to reflect the essential framework of labeling and standards programs. It is the intent of the authors and sponsors to distribute copies of this book worldwide at no charge for the general public benefit. The guidebook is also available on the web at www.CLASPonline.org and can be downloaded to be used intact or piecemeal for whatever beneficial purposes readers may conceive.

  3. Distributed Energy Alternative to Electrical Distribution Grid Expansion in Consolidated Edison Service Territory

    SciTech Connect (OSTI)

    Kingston, Tim; Kelly, John

    2008-08-01

    The nation's power grid, specifically the New York region, faces burgeoning energy demand and suffers from congested corridors and aging equipment that cost New York consumers millions of dollars. Compounding the problem is high-density buildup in urban areas that limits available space to expand grid capacity. Coincidently, these urban areas are precisely where additional power is required. DER in this study refers to combined heat and power (CHP) technology, which simultaneously generates heat and electricity at or near the point where the energy will be consumed. There are multiple CHP options available that, combined with a portfolio of other building energy efficiency (EE) strategies, can help achieve a more efficient supply-demand balance than what the grid can currently provide. As an alternative to expanding grid capacity, CHP and EE strategies can be deployed in a flexible manner at virtually any point on the grid to relieve load. What's more, utilities and customers can install them in a variety of potentially profitable applications that are more environmentally friendly. Under the auspices of the New York State Energy Research and Development Authority (NYSERDA) and the Oak Ridge National Laboratory representing the Office of Electricity of the U.S. Department of Energy, Gas Technology Institute (GTI) conducted this study in cooperation with Consolidated Edison to help broaden the market penetration of EE and DER. This study provides realistic load models and identifies the impacts that EE and DER can have on the electrical distribution grid; specifically within the current economic and regulatory environment of a high load growth area of New York City called Hudson Yards in Midtown Manhattan. These models can be used to guide new policies that improve market penetration of appropriate CHP and EE technologies in new buildings. The following load modeling scenarios were investigated: (1) Baseline: All buildings are built per the Energy Conservation Construction Code of New York State (No CHP applied and no EE above the code); (2) Current Policy: This is a business-as-usual (BAU) scenario that incorporates some EE and DER based on market potential in the current economic and regulatory environment; (3) Modified Rate 14RA: This economic strategy is meant to decrease CHP payback by removing the contract demand from, and adding the delivery charge to the Con Edison Standby Rate PSC2, SC14-RA; (4) Carbon Trade at $20/metric tonne (mt): This policy establishes a robust carbon trading system in NY that would allow building owners to see the carbon reduction resulting from CHP and EE.

  4. Development of Toroidal Core Transformers

    SciTech Connect (OSTI)

    Leon, Francisco

    2014-05-31

    The original objective of this project was to design, build and test a few prototypes of singlephase dry-type distribution transformers of 25 kVA, 2.4 kV primary to 120 V transformers using cores made of a continuous steel strip shaped like a doughnut (toroid). At different points during the development of the project, the scope was enhanced to include the more practical case of a 25 kVA transformer for a 13.8 kV primary system voltage. Later, the scope was further expanded to design and build a 50 kVA unit to transformer voltage from 7.62 kV to 2x120 V. This is a common transformer used by Con Edison of New York and they are willing to test it in the field. The project officially started in September 2009 and ended in May 2014. The progress was reported periodically to DOE in eighteen quarterly reports. A Continuation Application was submitted to DOE in June 2010. In May 2011 we have requested a non-cost extension of the project. In December 2011, the Statement of Project Objectives (SOPO) was updated to reflect the real conditions and situation of the project as of 2011. A second Continuation Application was made and funding was approved in 2013 by DOE and the end date was extended to May 2014.The technical challenges that were overcome in this project include: the development of the technology to pass the impulse tests, derive a model for the thermal performance, produce a sound mechanical design, and estimate the inrush current. However, the greatest challenge that we faced during the development of the project was the complications of procuring the necessary parts and materials to build the transformers. The actual manufacturing process is relatively fast, but getting all parts together is a very lengthy process. The main products of this project are two prototypes of toroidal distribution transformers of 7.62 kV (to be used in a 13.8 kV system) to 2x120 V secondary (standard utilization voltage); one is rated at 25 kVA and the other at 50 kVA. The 25 kVA transformer passed the impulse test in KEMA high-voltage laboratories. Additional products include: nine papers published in the IEEE Transactions on Power Delivery, one patent has been filed, three PhD students were supported from beginning to graduation, five postdoctoral fellows, and three MSc students were partially supported. The electrical characteristics of our dry-type toroidal transformers are similar to those of the oil-immersed pole mounted transformers currently in use by many utilities, but toroids have higher efficiency. The no-load losses of the 50 kVA prototype are only 45 W. A standard transformer has no-load losses between 90 and 240 W. Thus, even the finest transformer built today with standard technology has double the amount of no-load losses than the prototype toroidal transformer. When the manufacturing process is prepared for mass production, the cost of a dry-type toroidal transformer would be similar to the price of an oil-filed standard design. However, because of the greatly reduced losses, the total ownership cost of a toroidal transformer could be about half of a traditional design. We got a grant from Power Bridge NY in the amount of $149,985 from June 2014 to May 2015 to continue developing the transformer with commercialization objectives. We are considering the possibility to incorporate a company to manufacture the transformers and have contacted investors. The current status of the real life testing is as follows: after several months of silence, Con Edison has re-started conversations and has shown willingness to test the transformer. Other companies, PSE&G and National Grid have recently also shown interest and we will present our product to them soon.

  5. Enhanced vector borne disease surveillance of California Culex mosquito populations reveals spatial and species-specific barriers of infection.

    SciTech Connect (OSTI)

    VanderNoot, Victoria A.; Curtis, Deanna Joy; Koh, Chung-Yan; Brodsky, Benjamin H; Lane, Todd

    2014-08-01

    Monitor i ng in f ectio n s in v ect o rs su c h as m osquit o es, s a nd fl i es, tsetse fl i es, a nd ticks to i denti f y hu m a n path o gens m a y s e r v e as a n ear l y w arn i ng det e ction system t o dir e ct loc a l g o v er n ment dise a se pr e v en t i v e m easu r e s . One major hurdle i n de t ection is the abi l i t y to scre e n l arge n u mbers of v e c t ors for h uman patho g ens w i thout t h e u s e of ge n o t y pe - s p ecific m o lecu l ar tec h nique s . N e x t genera t ion s equ e nc i ng (NG S ) pr o v i des a n unbi a sed p latfo r m capab l e of identi f y i ng k n o w n a n d unk n o w n p ath o ge n s circula t ing w i thin a v e ctor p opul a tion, but utili z ing t h is te c h nolo g y i s tim e - con s u ming a n d cos t l y for v ecto r -b o rne disease su r v e illan c e pr o gra m s. T o addr e s s this w e d e v e lop e d cos t -eff e ct i v e Ilumina(r) R NA- S eq l i bra r y p r epara t ion m e thodol o gies i n con j u n ction w i t h an automa t ed c ompu t at i onal a n a l y sis pipel i n e to ch a racter i ze t h e microbial popula t ions c ircula t i n g in Cu l e x m o squit o e s (Cul e x qui n quef a s c iatu s , C ul e x quinq u efasc i atus / pip i ens co m pl e x h y bri d s, and C u l e x ta r salis ) t hroug h out Californ i a. W e assembled 2 0 n o vel a n d w e l l -do c ume n ted a r b o v i ruses repres e nting mem b e rs of B u n y a v ir i da e , F l a v i virid a e, If a virida e , Meson i v i rida e , Nid o v iri d ae, O rtho m y x o virid a e, Pa r v o v iri d ae, Re o virid a e, R h a b d o v i rid a e, T y m o v iri d ae, a s w ell as s e v e r al u n assi g n e d v irus e s . In addit i o n, w e m app e d mRNA s pecies to d i vergent s peci e s of t r y panos o ma a nd pl a s modium eu k a r yotic parasit e s and cha r a c terized t he p r oka r yot i c microb i al c o mposit i on to i d enti f y bacteri a l tran s c r ipts der i v ed from wolba c hia, clo s tridi u m, m y c oplas m a, fusoba c terium and c am p y l o bacter bac t er i al spec i e s . W e utilized the s e mic r obial transcri p tomes pre s e nt in g e ogra p hical l y defined Cul e x po p ul a tions to defi n e spatial and m osqui t o specie s -spec i fic ba r r iers of i n fecti o n. T he v i r ome and microbi o me c o mpos i tion id e ntified in e ach mosqui t o p o ol pr o v i ded suf f icient resolut i on to dete r m i ne both the mosq u ito species and the g e o graphic regi o n in Californ i a w h e re t h e mosqui t o po o l orig i n ated. T his d a ta pr o v i des ins i ght in t o the compl e x i t y of microb i al spec i es cir c ulati n g in med i cal l y i mport a nt Culex mosqui t oes a nd t h eir potent i al im p act o n t he tran s missi o n of v ector-b o rne human / veter i na r y p a t hogens in C a liforn i a.

  6. Virtual tool mark generation for efficient striation analysis in forensic science

    SciTech Connect (OSTI)

    Ekstrand, Laura

    2012-11-16

    In 2009, a National Academy of Sciences report called for investigation into the scienti#12;c basis behind tool mark comparisons (National Academy of Sciences, 2009). Answering this call, Chumbley et al. (2010) attempted to prove or disprove the hypothesis that tool marks are unique to a single tool. They developed a statistical algorithm that could, in most cases, discern matching and non-matching tool marks made at di#11;erent angles by sequentially numbered screwdriver tips. Moreover, in the cases where the algorithm misinterpreted a pair of marks, an experienced forensics examiner could discern the correct outcome. While this research served to con#12;rm the basic assumptions behind tool mark analysis, it also suggested that statistical analysis software could help to reduce the examiner's workload. This led to a new tool mark analysis approach, introduced in this thesis, that relies on 3D scans of screwdriver tip and marked plate surfaces at the micrometer scale from an optical microscope. These scans are carefully cleaned to remove noise from the data acquisition process and assigned a coordinate system that mathematically de#12;nes angles and twists in a natural way. The marking process is then simulated by using a 3D graphics software package to impart rotations to the tip and take the projection of the tip's geometry in the direction of tool travel. The edge of this projection, retrieved from the 3D graphics software, becomes a virtual tool mark. Using this method, virtual marks are made at increments of 5#14; and compared to a scan of the evidence mark. The previously developed statistical package from Chumbley et al. (2010) performs the comparison, comparing the similarity of the geometry of both marks to the similarity that would occur due to random chance. The resulting statistical measure of the likelihood of the match informs the examiner of the angle of the best matching virtual mark, allowing the examiner to focus his/her mark analysis on a smaller range of angles. Preliminary results are quite promising. In a study with both sides of 6 screwdriver tips and 34 corresponding marks, the method distinguished known matches from known non-matches with zero false positive matches and only two matches mistaken for non-matches. For matches, it could predict the correct marking angle within #6;5-10#14;. Moreover, on a standard desktop computer, the virtual marking software is capable of cleaning 3D tip and plate scans in minutes and producing a virtual mark and comparing it to a real mark in seconds. These results support several of the professional conclusions of the tool mark analysis com- munity, including the idea that marks produced by the same tool only match if they are made at similar angles. The method also displays the potential to automate part of the comparison process, freeing the examiner to focus on other tasks, which is important in busy, backlogged crime labs. Finally, the method o#11;ers the unique chance to directly link an evidence mark to the tool that produced it while reducing potential damage to the evidence.

  7. Generic Natural Systems Evaluation - Thermodynamic Database Development and Data Management

    SciTech Connect (OSTI)

    Wolery, T W; Sutton, M

    2011-09-19

    Thermodynamic data are essential for understanding and evaluating geochemical processes, as by speciation-solubility calculations, reaction-path modeling, or reactive transport simulation. These data are required to evaluate both equilibrium states and the kinetic approach to such states (via the affinity term or its equivalent in commonly used rate laws). These types of calculations and the data needed to carry them out are a central feature of geochemistry in many applications, including water-rock interactions in natural systems at low and high temperatures. Such calculations are also made in engineering studies, for example studies of interactions involving man-made materials such as metal alloys and concrete. They are used in a fairly broad spectrum of repository studies where interactions take place among water, rock, and man-made materials (e.g., usage on YMP and WIPP). Waste form degradation, engineered barrier system performance, and near-field and far-field transport typically incorporate some level of thermodynamic modeling, requiring the relevant supporting data. Typical applications of thermodynamic modeling involve calculations of aqueous speciation (which is of great importance in the case of most radionuclides), solubilities of minerals and related solids, solubilities of gases, and stability relations among the various possible phases that might be present in a chemical system at a given temperature and pressure. If a phase can have a variable chemical composition, then a common calculational task is to determine that composition. Thermodynamic modeling also encompasses ion exchange and surface complexation processes. Any and all of these processes may be important in a geochemical process or reactive transport calculation. Such calculations are generally carried out using computer codes. For geochemical modeling calculations, codes such as EQ3/6 and PHREEQC, are commonly used. These codes typically provide 'full service' geochemistry, meaning that they use a large body of thermodynamic data, generally from a supporting database file, to sort out the various important reactions from a wide spectrum of possibilities, given specified inputs. Usually codes of this kind are used to construct models of initial aqueous solutions that represent initial conditions for some process, although sometimes these calculations also represent a desired end point. Such a calculation might be used to determine the major chemical species of a dissolved component, the solubility of a mineral or mineral-like solid, or to quantify deviation from equilibrium in the form of saturation indices. Reactive transport codes such as TOUGHREACT and NUFT generally require the user to determine which chemical species and reactions are important, and to provide the requisite set of information including thermodynamic data in an input file. Usually this information is abstracted from the output of a geochemical modeling code and its supporting thermodynamic data file. The Yucca Mountain Project (YMP) developed two qualified thermodynamic databases to model geochemical processes, including ones involving repository components such as spent fuel. The first of the two (BSC, 2007a) was for systems containing dilute aqueous solutions only, the other (BSC, 2007b) for systems involving concentrated aqueous solutions and incorporating a model for such based on Pitzer's (1991) equations. A 25 C-only database with similarities to the latter was also developed for the Waste Isolation Pilot Plant (WIPP, cf. Xiong, 2005). The NAGRA/PSI database (Hummel et al., 2002) was developed to support repository studies in Europe. The YMP databases are often used in non-repository studies, including studies of geothermal systems (e.g., Wolery and Carroll, 2010) and CO2 sequestration (e.g., Aines et al., 2011).

  8. Theoretical Studies in Heterogenous Catalysis: Towards a Rational Design of Novel Catalysts for Hydrodesulfurization and Hydrogen Production

    SciTech Connect (OSTI)

    Rodriguez,J.A.; Liu, P.

    2008-10-01

    Traditionally, knowledge in heterogeneous catalysis has come through empirical research. Nowadays, there is a clear interest to change this since millions of dollars in products are generated every year in the chemical and petrochemical industries through catalytic processes. To obtain a fundamental knowledge of the factors that determine the activity of heterogeneous catalysts is a challenge for modern science since many of these systems are very complex in nature. In principle, when a molecule adsorbs on the surface of a heterogeneous catalyst, it can interact with a large number of bonding sites. It is known that the chemical properties of these bonding sites depend strongly on the chemical environment around them. Thus, there can be big variations in chemical reactivity when going from one region to another in the surface of a heterogeneous catalyst. A main objective is to understand how the structural and electronic properties of a surface affect the energetics for adsorption processes and the paths for dissociation and chemical reactions. In recent years, advances in instrumentation and experimental procedures have allowed a large series of detailed works on the surface chemistry of heterogeneous catalysts. In many cases, these experimental studies have shown interesting and unique phenomena. Theory is needed to unravel the basic interactions behind these phenomena and to provide a general framework for the interpretation of experimental results. Ideally, theoretical calculations based on density-functional theory have evolved to the point that one should be able to predict patterns in the activity of catalytic surfaces. As in the case of experimental techniques, no single theoretical approach is able to address the large diversity of phenomena occurring on a catalyst. Catalytic surfaces are usually modeled using either a finite cluster or a two-dimensionally periodic slab. Many articles have been published comparing the results of these two approaches. An important advantage of the cluster approach is that one can use the whole spectrum of quantum-chemical methods developed for small molecules with relatively minor modifications. On the other hand, the numerical effort involved in cluster calculations increases rather quickly with the size of the cluster. This problem does not exist when using slab models. Due to the explicit incorporation of the periodicity of the crystal lattice through the Bloch theorem, the actual dimension of a slab calculation depends only on the size of the unit cell. In practical terms, the slab approach is mainly useful for investigating the behavior of adsorbates at medium and high coverages. Very large unit cells are required at the limit of low to zero coverage, or when examining the properties and chemical behavior of isolated defect sites in a surface. In these cases, from a computational viewpoint, the cluster approach can be much more cost effective than the slab approach. Slab and cluster calculations can be performed at different levels of sophistication: semi-empirical methods, simple ab initio Hartree-Fock, ab initio post-Hartree-Fock (CI, MP2, etc), and density functional theory. Density-functional (DF) based calculations frequently give adsorption geometries with a high degree of accuracy and predict reliable trends for the energetics of adsorption reactions. This article provides a review of recent theoretical studies that deal with the behavior of novel catalysts used for hydrodesulfurization (HDS) reactions and the production of hydrogen (i.e. catalytic processes employed in the generation of clean fuels). These studies involve a strong coupling of theory and experiment. A significant fraction of the review is focused on the importance of size-effects and correlations between the electronic and chemical properties of catalytic materials. The article begins with a discussion of results for the desulfurization of thiophene on metal carbides and phosphides, systems which have the potential to become the next generation of industrial HDS catalysts. Then, systematic studies con

  9. Accounting for Global Climate Model Projection Uncertainty in Modern Statistical Downscaling

    SciTech Connect (OSTI)

    Johannesson, G

    2010-03-17

    Future climate change has emerged as a national and a global security threat. To carry out the needed adaptation and mitigation steps, a quantification of the expected level of climate change is needed, both at the global and the regional scale; in the end, the impact of climate change is felt at the local/regional level. An important part of such climate change assessment is uncertainty quantification. Decision and policy makers are not only interested in 'best guesses' of expected climate change, but rather probabilistic quantification (e.g., Rougier, 2007). For example, consider the following question: What is the probability that the average summer temperature will increase by at least 4 C in region R if global CO{sub 2} emission increases by P% from current levels by time T? It is a simple question, but one that remains very difficult to answer. It is answering these kind of questions that is the focus of this effort. The uncertainty associated with future climate change can be attributed to three major factors: (1) Uncertainty about future emission of green house gasses (GHG). (2) Given a future GHG emission scenario, what is its impact on the global climate? (3) Given a particular evolution of the global climate, what does it mean for a particular location/region? In what follows, we assume a particular GHG emission scenario has been selected. Given the GHG emission scenario, the current batch of the state-of-the-art global climate models (GCMs) is used to simulate future climate under this scenario, yielding an ensemble of future climate projections (which reflect, to some degree our uncertainty of being able to simulate future climate give a particular GHG scenario). Due to the coarse-resolution nature of the GCM projections, they need to be spatially downscaled for regional impact assessments. To downscale a given GCM projection, two methods have emerged: dynamical downscaling and statistical (empirical) downscaling (SDS). Dynamic downscaling involves configuring and running a regional climate model (RCM) nested within a given GCM projection (i.e., the GCM provides bounder conditions for the RCM). On the other hand, statistical downscaling aims at establishing a statistical relationship between observed local/regional climate variables of interest and synoptic (GCM-scale) climate predictors. The resulting empirical relationship is then applied to future GCM projections. A comparison of the pros and cons of dynamical versus statistical downscaling is outside the scope of this effort, but has been extensively studied and the reader is referred to Wilby et al. (1998); Murphy (1999); Wood et al. (2004); Benestad et al. (2007); Fowler et al. (2007), and references within those. The scope of this effort is to study methodology, a statistical framework, to propagate and account for GCM uncertainty in regional statistical downscaling assessment. In particular, we will explore how to leverage an ensemble of GCM projections to quantify the impact of the GCM uncertainty in such an assessment. There are three main component to this effort: (1) gather the necessary climate-related data for a regional SDS study, including multiple GCM projections, (2) carry out SDS, and (3) assess the uncertainty. The first step is carried out using tools written in the Python programming language, while analysis tools were developed in the statistical programming language R; see Figure 1.

  10. Distributed Sensor Coordination for Advanced Energy Systems

    SciTech Connect (OSTI)

    Tumer, Kagan

    2013-07-31

    The ability to collect key system level information is critical to the safe, efficient and reli- able operation of advanced energy systems. With recent advances in sensor development, it is now possible to push some level of decision making directly to computationally sophisticated sensors, rather than wait for data to arrive to a massive centralized location before a decision is made. This type of approach relies on networked sensors (called agents from here on) to actively collect and process data, and provide key control deci- sions to significantly improve both the quality/relevance of the collected data and the as- sociating decision making. The technological bottlenecks for such sensor networks stem from a lack of mathematics and algorithms to manage the systems, rather than difficulties associated with building and deploying them. Indeed, traditional sensor coordination strategies do not provide adequate solutions for this problem. Passive data collection methods (e.g., large sensor webs) can scale to large systems, but are generally not suited to highly dynamic environments, such as ad- vanced energy systems, where crucial decisions may need to be reached quickly and lo- cally. Approaches based on local decisions on the other hand cannot guarantee that each agent performing its task (maximize an agent objective) will lead to good network wide solution (maximize a network objective) without invoking cumbersome coordination rou- tines. There is currently a lack of algorithms that will enable self-organization and blend the efficiency of local decision making with the system level guarantees of global decision making, particularly when the systems operate in dynamic and stochastic environments. In this work we addressed this critical gap and provided a comprehensive solution to the problem of sensor coordination to ensure the safe, reliable, and robust operation of advanced energy systems. The differentiating aspect of the proposed work is in shift- ing the focus towards what to observe rather than how to observe in large sensor networks, allowing the agents to actively determine both the structure of the network and the relevance of the information they are seeking to collect. In addition to providing an implicit coordination mechanism, this approach allows the system to be reconfigured in response to changing needs (e.g., sudden external events requiring new responses) or changing sensor network characteristics (e.g., sudden changes to plant condition). Outcome Summary: All milestones associated with this project have been completed. In particular, private sensor objective functions were developed which are aligned with the global objective function, sensor effectiveness has been improved by using sensor teams, system efficiency has been improved by 30% using difference evaluation func- tions, we have demonstrated system reconfigurability for 20% changes in system con- ditions, we have demonstrated extreme scalability of our proposed algorithm, we have demonstrated that sensor networks can overcome disruptions of up to 20% in network conditions, and have demonstrated system reconfigurability to 20% changes in system conditions in hardware-based simulations. This final report summarizes how each of these milestones was achieved, and gives insight into future research possibilities past the work which has been completed. The following publications support these milestones [6, 8, 9, 10, 16, 18, 19].

  11. Pawnee Nation Energy Option Analyses

    SciTech Connect (OSTI)

    Matlock, M.; Kersey, K.; Riding In, C.

    2009-07-21

    Pawnee Nation of Oklahoma Energy Option Analyses In 2003, the Pawnee Nation leadership identified the need for the tribe to comprehensively address its energy issues. During a strategic energy planning workshop a general framework was laid out and the Pawnee Nation Energy Task Force was created to work toward further development of the tribe’s energy vision. The overarching goals of the “first steps” project were to identify the most appropriate focus for its strategic energy initiatives going forward, and to provide information necessary to take the next steps in pursuit of the “best fit” energy options. Description of Activities Performed The research team reviewed existing data pertaining to the availability of biomass (focusing on woody biomass, agricultural biomass/bio-energy crops, and methane capture), solar, wind and hydropower resources on the Pawnee-owned lands. Using these data, combined with assumptions about costs and revenue streams, the research team performed preliminary feasibility assessments for each resource category. The research team also reviewed available funding resources and made recommendations to Pawnee Nation highlighting those resources with the greatest potential for financially-viable development, both in the near-term and over a longer time horizon. Findings and Recommendations Due to a lack of financial incentives for renewable energy, particularly at the state level, combined mediocre renewable energy resources, renewable energy development opportunities are limited for Pawnee Nation. However, near-term potential exists for development of solar hot water at the gym, and an exterior wood-fired boiler system at the tribe’s main administrative building. Pawnee Nation should also explore options for developing LFGTE resources in collaboration with the City of Pawnee. Significant potential may also exist for development of bio-energy resources within the next decade. Pawnee Nation representatives should closely monitor market developments in the bio-energy industry, establish contacts with research institutions with which the tribe could potentially partner in grant-funded research initiatives. In addition, a substantial effort by the Kaw and Cherokee tribes is underway to pursue wind development at the Chilocco School Site in northern Oklahoma where Pawnee is a joint landowner. Pawnee Nation representatives should become actively involved in these development discussions and should explore the potential for joint investment in wind development at the Chilocco site. Financial incentives for project development are generally structured to provide tribes with access to conventional financing mechanisms. Grant funding for project construction is currently difficult to obtain. Substantial new opportunities for bio-fuel development may exist in the next few years with passage of the 2007 Farm Bill, and through opportunities made available through Oklahoma’s new Bio-energy Center. A review of potential alternatives to Pawnee Nation’s current electricity supply scenario revealed that a range of options could be viable. These include the following scenarios: business as usual, alternative supply, negotiate lower rates with City of Pawnee, focus on reducing energy usage, develop electric utility organization. Under any circumstances, Pawnee Nation should purse strategies to reduce energy usage, as this is the simplest means of reducing electric costs and environmental impacts. The research team also recommends that Pawnee Nation initiate some focused discussions with the City of Pawnee, with GRDA, and with IEC to discuss its wholesale supply purchase options. These discussions will better inform the Pawnee Energy Team of the specific pros and cons of its wholesale power supply options, and will assist the Team’s broader decision-making on utility-related issues. The ultimate path chosen by Pawnee Nation will depend on further consideration of priorities and potential barriers by Pawnee Nation’s Energy Team.

  12. Preliminary evaluation of the lifecycle costs and market barriers of reflective pavements

    SciTech Connect (OSTI)

    Ting, M.; Koomey, J.G.; Pomerantz, M.

    2001-11-21

    The objective of this study is to evaluate the life cycle costs and market barriers associated with using reflective paving materials in streets and parking lots as a way to reduce the urban heat island effect. We calculated and compared the life cycle costs of conventional asphalt concrete (AC) pavements to those of other existing pavement technologies with higher reflectivity-portland cement concrete (PCC), porous pavements, resin pavements, AC pavements using light-colored chip seals, and AC pavements using light-colored asphalt emulsion additives. We found that for streets and parking lots, PCC can provide a cost-effective alternative to conventional AC when severely damaged pavements must be completely reconstructed. We also found that rehabilitating damaged AC streets and intersections with thin overlays of PCC (ultra-thin white topping) can often provide a cost-effective alternative to standard rehabilitation techniques using conventional AC. Chip sealing is a common maintenance treatment for low-volume streets which, when applied using light-colored chips, could provide a reflective pavement surface. If the incremental cost of using light-colored chips is low, this chip sealing method could also be cost-effective, but the incremental costs of light-colored chips are as of yet uncertain and expected to vary. Porous pavements were found to have higher life cycle costs than conventional AC in parking lots, but several cost-saving features of porous pavements fell outside the boundaries of this study. Resin pavements were found to be only slightly more expensive than conventional AC, but the uncertainties in the cost and performance data were large. The use of light-colored additives in asphalt emulsion seal coats for parking lot pavements was found to be significantly more expensive than conventional AC, reflecting its current niche market of decorative applications. We also proposed two additional approaches to increasing the reflectivity of conventional AC, which we call the chipping and aggregate methods, and calculated their potential life cycle costs. By analyzing the potential for increased pavement durability resulting from these conceptual approaches, we then estimated the incremental costs that would allow them to be cost-effective compared to conventional AC. For our example case of Los Angeles, we found that those allowable incremental costs range from less than dollar 1 to more than dollar 11 per square yard (dollar 1 to dollar 13 per square meter) depending on street type and the condition of the original pavement. Finally, we evaluated the main actors in the pavement market and the existing and potential market barriers associated with reflective pavements. Apart from situations where lifecycle costs are high compared to conventional AC, all reflective paving technologies face a cultural barrier based on the belief that black is better. For PCC, high first costs were found to be the most significant economic barrier, particularly where agencies are cons trained by first cost. Lack of developer standards was found to be a significant institutional barrier to PCC since developers are often not held accountable for the long-term maintenance of roads after initial construction, which creates a misplaced incentive to build low first-cost pavements. PCC also faces site-specific barriers such as poorly compacted base soils and proximity to areas of frequent utility cutting.

  13. Creep and Creep-Fatigue Crack Growth at Structural Discontinuities and Welds

    SciTech Connect (OSTI)

    Dr. F. W. Brust; Dr. G. M. Wilkowski; Dr. P. Krishnaswamy; Mr. Keith Wichman

    2010-01-27

    The subsection ASME NH high temperature design procedure does not admit crack-like defects into the structural components. The US NRC identified the lack of treatment of crack growth within NH as a limitation of the code and thus this effort was undertaken. This effort is broken into two parts. Part 1, summarized here, involved examining all high temperature creep-fatigue crack growth codes being used today and from these, the task objective was to choose a methodology that is appropriate for possible implementation within NH. The second part of this task, which has just started, is to develop design rules for possible implementation within NH. This second part is a challenge since all codes require step-by-step analysis procedures to be undertaken in order to assess the crack growth and life of the component. Simple rules for design do not exist in any code at present. The codes examined in this effort included R5, RCC-MR (A16), BS 7910, API 579, and ATK (and some lesser known codes). There are several reasons that the capability for assessing cracks in high temperature nuclear components is desirable. These include: (1) Some components that are part of GEN IV reactors may have geometries that have sharp corners - which are essentially cracks. Design of these components within the traditional ASME NH procedure is quite challenging. It is natural to ensure adequate life design by modeling these features as cracks within a creep-fatigue crack growth procedure. (2) Workmanship flaws in welds sometimes occur and are accepted in some ASME code sections. It can be convenient to consider these as flaws when making a design life assessment. (3) Non-destructive Evaluation (NDE) and inspection methods after fabrication are limited in the size of the crack or flaw that can be detected. It is often convenient to perform a life assessment using a flaw of a size that represents the maximum size that can elude detection. (4) Flaws that are observed using in-service detection methods often need to be addressed as plants age. Shutdown inspection intervals can only be designed using creep and creep-fatigue crack growth techniques. (5) The use of crack growth procedures can aid in examining the seriousness of creep damage in structural components. How cracks grow can be used to assess margins on components and lead to further safe operation. After examining the pros and cons of all these methods, the R5 code was chosen as the most up-to-date and validated high temperature creep and creep fatigue code currently used in the world at present. R5 is considered the leader because the code: (1) has well established and validated rules, (2) has a team of experts continually improving and updating it, (3) has software that can be used by designers, (4) extensive validation in many parts with available data from BE resources as well as input from Imperial college's database, and (5) was specifically developed for use in nuclear plants. R5 was specifically developed for use in gas cooled nuclear reactors which operate in the UK and much of the experience is based on materials and temperatures which are experienced in these reactors. If the next generation advanced reactors to be built in the US used these same materials within the same temperature ranges as these reactors, then R5 may be appropriate for consideration of direct implementation within ASME code NH or Section XI. However, until more verification and validation of these creep/fatigue crack growth rules for the specific materials and temperatures to be used in the GEN IV reactors is complete, ASME should consider delaying this implementation. With this in mind, it is this authors opinion that R5 methods are the best available for code use today. The focus of this work was to examine the literature for creep and creep-fatigue crack growth procedures that are well established in codes in other countries and choose a procedure to consider implementation into ASME NH. It is very important to recognize that all creep and creep fatigue crack growth procedures that are part of high temperature design codes are related and very similar. This effort made no attempt to develop a new creep-fatigue crack growth predictive methodology. Rather examination of current procedures was the only goal. The uncertainties in the R5 crack growth methods and recommendations for more work are summarized here also.

  14. China's sustainable energy future: Scenarios of energy and carbonemissions (Summary)

    SciTech Connect (OSTI)

    Zhou, Dadi; Levine, Mark; Dai, Yande; Yu, Cong; Guo, Yuan; Sinton, Jonathan E.; Lewis, Joanna I.; Zhu, Yuezhong

    2004-03-10

    China has ambitious goals for economic development, and mustfind ways to power the achievement of those goals that are bothenvironmentally and socially sustainable. Integration into the globaleconomy presents opportunities for technological improvement and accessto energy resources. China also has options for innovative policies andmeasures that could significantly alter the way energy is acquired andused. These opportunities andoptions, along with long-term social,demographic, and economic trends, will shape China s future energysystem, and consequently its contribution to emissions of greenhousegases, particularly carbon dioxide (CO2). In this study, entitled China sSustainable Energy Future: Scenarios of Energy and Carbon Emissions, theEnergy Research Institute (ERI), an independent analytic organizationunder China's Na tional Development and Reform Commission (NDRC), soughtto explore in detail how China could achieve the goals of the TenthFive-Year Plan and its longer term aims through a sustainable developmentstrategy. China's ability to forge a sustainable energy path has globalconsequences. China's annual emissions of greenhouse gases comprisenearly half of those from developing countries, and 12 percent of globalemissions. Most of China's greenhouse gas emissions are in the form ofCO2, 87 percent of which came from energy use in 2000. In that year,China's carbon emissions from energy use and cement production were 760million metric tons (Mt-C), second only to the 1,500 Mt-C emitted by theUS (CDIAC, 2003). As China's energy consumption continues to increase,greenhouse gas emissions are expected to inevitably increase into thefuture. However, the rate at which energy consumption and emissions willincrease can vary significantly depending on whether sustainabledevelopment is recognized as an important policy goal. If the ChineseGovernment chooses to adopt measures to enhance energy efficiency andimprove the overall structure of energy supply, it is possible thatfuture economic growth may be supported by a relatively lower increase inenergy consumption. Over the past 20 years, energy intensity in China hasbeen reduced partly through technological and structural changes; currentannual emissions may be as much as 600 Mt-C lower than they would havebeen without intensity improvements. China must take into account itsunique circumstances in considering how to achieve a sustainabledevelopment path. This study considers the feasibility of such anachievement, while remaining open to exploring avenues of sustainabledevelopment that may be very different from existing models. Threescenarios were prepared to assist the Chinese Government to explore theissues, options and uncertainties that it confronts in shaping asustainable development path compatible with China's uniquecircumstances. The Promoting Sustainability scenario offers a systematicand complete interpretation of the social and economic goals proposed inthe Tenth Five-Year Plan. The possibility that environmentalsustainability would receive low priority is covered in the OrdinaryEffort scenario. Aggressive pursuit of sustainable development measuresalong with rapid economic expansion is featured in the Green Growthscenario. The scenarios differ in the degree to which a common set ofenergy supply and efficiency policies are implemented. In cons ultationwith technology and policy experts domestically and abroad, ERI developedstrategic scenarios and quantified them using an energy accounting model.The scenarios consider, in unprecedented detail, changes in energy demandstructure and technology, as well as energy supply, from 1998 to 2020.The scenarios in this study are an important step in estimating realistictargets for energy efficiency and energy supply development that are inline with a sustainable development strategy. The scenarios also helpanalyze and explore ways in which China might slow growth in greenhousegas emissions. The key results have important policy implications:Depending on how demand for energy services is met, China could quadrupleits gross domestic product between 1998 and 2020 with energy use risingby 70 percent to 130 percent (Figure 1). Continual progress in improvingthe efficiency and structure of industry is crucial to maintainingeconomic growth with minimal growth in energy use. In some industries,output may grow with no rise in energy use at all. Swelling ranks ofmotor vehicles will deepen China's dependence on imported oil up to 320Mt per year by 2020 an amount that global markets can easily supply. Tomoderate growth in transportation energy use, the strong promotion ofconvenient public transport will be needed in addition to tighter fuelefficiency standards and advanced vehicles. Fuel switching, efficientappliances, better heating and cooling systems, and improved buildingenvelope technologies will be needed in the fast-growing buildingssector. By 2020, China will still b

  15. Repackaging of High Fissile TRU Waste at the Transuranic Waste Processing Center - 13240

    SciTech Connect (OSTI)

    Oakley, Brian; Heacker, Fred; McMillan, Bill

    2013-07-01

    Twenty-six drums of high fissile transuranic (TRU) waste from Oak Ridge National Laboratory (ORNL) operations were declared waste in the mid-1980's and placed in storage with the legacy TRU waste inventory for future treatment and disposal at the Waste Isolation Pilot Plant (WIPP). Repackaging and treatment of the waste at the TRU Waste Packaging Center (TWPC) will require the installation of additional equipment and capabilities to address the hazards for handling and repackaging the waste compared to typical Contact Handled (CH) TRU waste that is processed at the TWPC, including potential hydrogen accumulation in legacy 6M/2R packaging configurations, potential presence of reactive plutonium hydrides, and significant low energy gamma radiation dose rates. All of the waste is anticipated to be repackaged at the TWPC and certified for disposal at WIPP. The waste is currently packaged in multiple layers of containers which presents additional challenges for repackaging activities due to the potential for the accumulation of hydrogen gas in the container headspace in quantities than could exceed the Lower Flammability Limit (LFL). The outer container for each waste package is a stainless steel 0.21 m{sup 3} (55-gal) drum which contains either a 0.04 m{sup 3} or 0.06 m{sup 3} (10-gal or 15-gal) 6M drum. The inner 2R container in each 6M drum is ?12 cm (5 in) outside diameter x 30-36 cm (12-14 in) long and is considered to be a > 4 liter sealed container relative to TRU waste packaging criteria. Inside the 2R containers are multiple configurations of food pack cans, pipe nipples, and welded capsules. The waste contains significant quantities of high burn-up plutonium oxides and metals with a heavy weight percentage of higher atomic mass isotopes and the subsequent in-growth of significant quantities of americium. Significant low energy gamma radiation is expected to be present due to the americium in-growth. Radiation dose rates on inner containers are estimated to be 1-3 mSv/hr (100-300 mrem/hr) with an unshielded dose rate on the waste itself of over 10 mSv/hr (1 rem/hr). Additional equipment to be installed at the TWPC will include a new perma-con enclosure and a shielded/inert glovebox in the process building to repackage and stabilize the waste. All of the waste will be repackaged into Standard Pipe Overpacks. Most of the waste (21 of the 26 drums) is expected to be repackaged at the food-pack can level (i.e. the food-pack cans will not be opened). Five of the incoming waste containers are expected to be repackaged at the primary waste level. Three of the containers exceed the 200 gram Pu-239 Fissile Gram Equivalent (FGE) limit for the Standard Pipe Overpack. These three containers will be repackaged down to the primary waste level and divided into eight Standard Pipe Overpacks for shipment to WIPP. Two containers must be stabilized to eliminate any reactive plutonium hydrides that may be present. These containers will be opened in the inert, shielded glovebox, and the remaining corroded plutonium metal converted to a stable oxide form by using a 600 deg. C tube furnace with controlled oxygen feed in a helium carrier gas. The stabilized waste will then be packaged into two Standard Pipe Overpacks. Design and build out activities for the additional repackaging capabilities at the TWPC are scheduled to begin in Fiscal Year 2013 with repackaging, stabilization, and certification activities scheduled to begin in Fiscal Year 2014. Following repackaging and stabilization activities, the Standard Pipe Overpacks will be certified for disposal at WIPP utilizing Non-Destructive Examination (NDE) to verify the absence of prohibited items and Non-Destructive Assay (NDA) to verify the isotopic content under the TWPC WIPP certification program implemented by the Central Characterization Project (CCP). (authors)

  16. Final Technical Report

    SciTech Connect (OSTI)

    Peter McIntyre

    2006-08-16

    This document presents an annual report on our long-term R&D grant for development of new technology for future colliders. The organizing theme of our development is to develop a compact high-field collider dipole, utilizing wind-and-react Nb3Sn coil fabrication, stress man-agement, conductor optimization, bladder preload, and flux plate suppression of magnetization multipoles . The development trail for this new technology began over four years ago with the successful testing of TAMU12, a NbTi model in which we put to a first test many of the construction details of the high-field design. We have built TAMU2, a mirror-geometry dipole containing a single coil module of the 3-module set required for the 14 Tesla design. This first Nb3Sn model was built using ITER conductor which carries much less current than high-performance conductor but enables us to prove in practice our reaction bake and impregnation strategies with free su-perconductor. TAMU2 has been shipped to LBNL for testing. Work is beginning on the con-struction of TAMU3, which will contain two coil modules of the 14 Tesla design. TAMU3 has a design field of 13.5 Tesla, and will enable us to fully evaluate the issues of stress management that will be important to the full design. With the completion of TAMU2 and the construction of TAMU3 the Texas A&M group comes of age in the family of superconducting magnet R&D laboratories. We have completed the phase of developing core technologies and fixtures and entered the phase of building and testing a succession of TAMU3 model dipoles that each build incrementally upon a proven core design. TAMU3 provides a testbed in which we can build a succession of model dipoles in which each new model uses one new winding module coupled with one module from the previ-ous model, and uses all of the same structural elements in successive models. This incremental development should enable us to keep to a minimum the time between the completion and test-ing of successive models. Each new model will incorporate a particular design element that we wish to evaluate: first the basic TAMU3 structure, then substitute one pancake using high-performance superconductor (3,000 A/mm2 @ 12 T, 4.2 K), then substitute one pancake using mixed-strand cable, then insert a steel nose to reduce the peak field in the end region of a single-pancake coil. While we are building and testing this succession of TAMU3 models we will de-velop the tooling and evaluate strategies for flaring the ends of the center double-pancake coil needed for.TAMU4. TAMU4 is a full implementation of the design, culminating in 14 Tesla performance. Pending the proposed increase of budget from the present 3-year-flat budget and providing that the tests of each model dipole do not lead to substantial modifications of the de-sign, the time to build and test each succeeding model could be ~9 months. During the present funding year we made a sequence of innovations that have major poten-tial benefit for the commissioning of LHC, upgrade of its luminosity, and its long-term future: An electrode assembly, suitable for integration within the existing LHC dipoles, ca-pable of killing the electron cloud effect an effect that threatens to limit the lumi-nosity that could be attained in LHC; A Nb3Sn structured cable, which makes it possible to design very high gradient quadrupoles for upgrade of the interaction regions of LHC to enhance its luminosity; A Nb3Sn/NbTi levitated-pole dipole for use in the D1 bends that combine and sepa-rate the beams at the intersection regions. The levitated-pole design uniquely solves the problems of radiation damage and heating from particles swept from the beam. A hybrid dipole technology, in which inner windings of Bi-2212 are integrated in a Nb3Sn block-coil dipole to push to 24 Tesla, opening the possibility of a future trip-ler upgrade of LHC .

  17. Water Security Toolkit User Manual Version 1.2.

    SciTech Connect (OSTI)

    Klise, Katherine A.; Siirola, John Daniel; Hart, David; Hart, William E.; Phillips, Cynthia A.; Haxton, Terranna; Murray, Regan; Janke, Robert; Taxon, Thomas; Laird, Carl; Seth, Arpan; Hackebeil, Gabriel; McGee, Shawn; Mann, Angelica

    2014-08-01

    The Water Security Toolkit (WST) is a suite of open source software tools that can be used by water utilities to create response strategies to reduce the impact of contamination in a water distribution network . WST includes hydraulic and water quality modeling software , optimizati on methodologies , and visualization tools to identify: (1) sensor locations to detect contamination, (2) locations in the network in which the contamination was introduced, (3) hydrants to remove contaminated water from the distribution system, (4) locations in the network to inject decontamination agents to inactivate, remove, or destroy contaminants, (5) locations in the network to take grab sample s to help identify the source of contamination and (6) valves to close in order to isolate contaminate d areas of the network. This user manual describes the different components of WST , along w ith examples and case studies. License Notice The Water Security Toolkit (WST) v.1.2 Copyright c 2012 Sandia Corporation. Under the terms of Contract DE-AC04-94AL85000, there is a non-exclusive license for use of this work by or on behalf of the U.S. government. This software is distributed under the Revised BSD License (see below). In addition, WST leverages a variety of third-party software packages, which have separate licensing policies: Acro Revised BSD License argparse Python Software Foundation License Boost Boost Software License Coopr Revised BSD License Coverage BSD License Distribute Python Software Foundation License / Zope Public License EPANET Public Domain EPANET-ERD Revised BSD License EPANET-MSX GNU Lesser General Public License (LGPL) v.3 gcovr Revised BSD License GRASP AT&T Commercial License for noncommercial use; includes randomsample and sideconstraints executable files LZMA SDK Public Domain nose GNU Lesser General Public License (LGPL) v.2.1 ordereddict MIT License pip MIT License PLY BSD License PyEPANET Revised BSD License Pyro MIT License PyUtilib Revised BSD License PyYAML MIT License runpy2 Python Software Foundation License setuptools Python Software Foundation License / Zope Public License six MIT License TinyXML zlib License unittest2 BSD License Utilib Revised BSD License virtualenv MIT License Vol Common Public License vpykit Revised BSD License Additionally, some precompiled WST binary distributions might bundle other third-party executables files: Coliny Revised BSD License (part of Acro project) Dakota GNU Lesser General Public License (LGPL) v.2.1 PICO Revised BSD License (part of Acro project) i Revised BSD License Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Sandia National Laboratories nor Sandia Corporation nor the names of its con- tributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS %22AS IS%22 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IM- PLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SANDIA CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUD- ING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ii Acknowledgements This work was supported by the U.S. Environmental Protection Agency through its Office of Research and Development (Interagency Agreement %23 DW8992192801). The material in this document has been subject to technical and policy review by the U.S. EPA, and approved for publication. The views expressed by individual authors, however, are their own, and do not necessarily reflect those of the U.S. Environmental Protection Agency. Mention of trade names, products, or services does not convey official U.S. EPA approval, endorsement, or recommendation. The Water Security Toolkit is an extension of the Threat Ensemble Vulnerability Assessment-Sensor Place- ment Optimization Tool (TEVA-SPOT), which was also developed with funding from the U.S. Environ- mental Protection Agency through its Office of Research and Development (Interagency Agreement %23 DW8992192801). The authors acknowledge the following individuals for their contributions to the devel- opment of TEVA-SPOT: Jonathan Berry (Sandia National Laboratories), Erik Boman (Sandia National Laboratories), Lee Ann Riesen (Sandia National Laboratories), James Uber (University of Cincinnati), and Jean-Paul Watson (Sandia National Laboratories). iii Acronyms ATUS American Time-Use Survey BLAS Basic linear algebra sub-routines CFU Colony-forming unit CVAR Conditional value at risk CWS Contamination warning system EA Evolutionary algorithm EDS Event detection system EPA U.S. Environmental Protection Agency EC Extent of Contamination ERD EPANET results database file GLPK GNU Linear Programming Kit GRASP Greedy randomized adaptive sampling process HEX Hexadecimal HTML HyperText markup language INP EPANET input file LP Linear program MC Mass consumed MILP Mixed integer linear program MIP Mixed integer program MSX Multi-species extension for EPANET NFD Number of failed detections NS Number of sensors NZD Non-zero demand PD Population dosed PE Population exposed PK Population killed TAI Threat assessment input file TCE Tailed-conditioned expectation TD Time to detection TEC Timed extent of contamination TEVA Threat ensemble vulnerability assessment TSB Tryptic soy broth TSG Threat scenario generation file TSI Threat simulation input file VAR Value at risk VC Volume consumed WST Water Security Toolkit YML YAML configuration file format for WST iv Symbols Notation Definition Example %7B , %7D set brackets %7B 1,2,3 %7D means a set containing the values 1,2, and 3. [?] is an element of s [?] S means that s is an element of the set S . [?] for all s = 1 [?] s [?] S means that the statement s = 1 is true for all s in set S . P summation P n i =1 s i means s 1 + s 2 + * * * + s n . %5C set minus S %5C T means the set that contains all those elements of S that are not in set T . %7C given %7C is used to define conditional probability. P ( s %7C t ) means the prob- ability of s occurring given that t occurs. %7C ... %7C cardinality Cardinality of a set is the number of elements of the set. If set S = %7B 2,4,6 %7D , then %7C S %7C = 3. v