Sample records for rocky flats plant

  1. Chemical tracking at the Rocky Flats Plant

    SciTech Connect (OSTI)

    Costain, D.B.

    1994-04-01T23:59:59.000Z

    EG&G Rocky Flats, Inc., has developed a chemical tracking system to support compliance with the Emergency Planning and community Right-to-Know Act (EPCRA) at the Rocky Flats Plant. This system, referred to as the EPCRA Chemical Control system (ECCS), uses bar code technology to uniquely identify and track the receipt, distribution, and use of chemicals. Chemical inventories are conducted using hand-held electronic scanners to update a site wide chemical database on a VAX 6000 computer. Information from the ECCS supports preparation of the EPCRA Tier II and Form R reports on chemical storage and use.

  2. Basic TRUEX process for Rocky Flats Plant

    SciTech Connect (OSTI)

    Leonard, R.A.; Chamberlain, D.B.; Dow, J.A.; Farley, S.E.; Nunez, L.; Regalbuto, M.C.; Vandegrift, G.F.

    1994-08-01T23:59:59.000Z

    The Generic TRUEX Model was used to develop a TRUEX process flowsheet for recovering the transuranics (Pu, Am) from a nitrate waste stream at Rocky Flats Plant. The process was designed so that it is relatively insensitive to changes in process feed concentrations and flow rates. Related issues are considered, including solvent losses, feed analysis requirements, safety, and interaction with an evaporator system for nitric acid recycle.

  3. Rocky Flats Plant Site Environmental Report: 1993 Highlights

    SciTech Connect (OSTI)

    Not Available

    1993-12-31T23:59:59.000Z

    The Rocky Flats Plant Site Environmental Report provides summary information on the plant`s environmental monitoring programs and the results recorded during 1993. The report contains a compliance summary, results of environmental monitoring and other related programs, a review of environmental remediation activities, information on external gamma radiation dose monitoring, and radiation dose estimates for the surrounding population. This section provides an overview of these topics and summarizes more comprehensive discussions found in the main text of this annual report.

  4. Polymer solidification of mixed wastes at the Rocky Flats Plant

    SciTech Connect (OSTI)

    Faucette, A.M.; Logsdon, B.W.; Lucerna, J.J.; Yudnich, R.J.

    1994-02-01T23:59:59.000Z

    The Rocky Flats Plant is pursuing polymer solidification as a viable treatment option for several mixed waste streams that are subject to land disposal restrictions within the Resource Conservation and Recovery Act provisions. Tests completed to date using both surrogate and actual wastes indicate that polyethylene microencapsulation is a viable treatment option for several mixed wastes at the Rocky Flats Plant, including nitrate salts, sludges, and secondary wastes such as ash. Treatability studies conducted on actual salt waste demonstrated that the process is capable of producing waste forms that comply with all applicable regulatory criteria, including the Toxicity Characteristic Leaching Procedure. Tests have also been conducted to evaluate the feasibility of macroencapsulating certain debris wastes in polymers. Several methods and plastics have been tested for macroencapsulation, including post-consumer recycle and regrind polyethylene.

  5. Rocky Flats Plant Site Environmental Report for 1992

    SciTech Connect (OSTI)

    Cirrincione, D.A.; Erdmann, N.L. [eds.

    1992-12-31T23:59:59.000Z

    The Rocky Rats Plant Site Environmental Report provides summary information on the plant`s environmental monitoring programs and the results recorded during 1992. The report contains a compliance summary, results of environmental monitoring and other related programs, a review of environmental remediation activities, information on external gamma radiation dose monitoring, and radiation dose estimates for the surrounding population.

  6. Seismic equipment qualification at Rocky Flats Plant: Lessons learned

    SciTech Connect (OSTI)

    Peregoy, W.; Herring, K.

    1993-08-01T23:59:59.000Z

    Seismic equipment qualification is being evaluated as a part of the Systematic Evaluation Program (SEP) at Rocky Flats Plant (RFP). Initially it was believed that the experience database developed by the Seismic Qualification Utility Group (SQUG) for commercial nuclear power plants, as outlined in their Generic Implementation Procedure (GIP), would provide a substantial benefit for the seismic adequacy verification of equipment at RFP. However, further review of the simplified guidelines contained in the GIP with respect to the specific RFP structures and components revealed substantial differences from the GIP criteria. Therefore, the number of ``outliers`` from the experience database defined in the GIP is greater than was initially anticipated. This paper presents details of the differences found between the RFP structures and components and those represented in the GIP, and the challenges presented for their evaluation at RFP. Approaches necessary to develop seismic verification data are also discussed. The discussions focus on experience with one of the nuclear facilities at RFP, Building 707. However, the conclusions are generally applicable to other similar facilities that typically comprise the RFP nuclear facilities.

  7. Environmental Survey preliminary report, Rocky Flats Plant, Golden, Colorado

    SciTech Connect (OSTI)

    Not Available

    1987-06-01T23:59:59.000Z

    This report presents the preliminary findings of the Environmental Survey of the United States Department of Energy (DOE), Rocky Flats Plant (RFP), conducted August 11 through 22, 1986. The Survey is being conducted by an multidisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the RFP. The Survey covers all environmental media and all areas of environmental regulations. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data observations of the operations carried on at RFP, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activates. The Sampling and Analysis Plan is being executed by DOE's Oak Ridge National Laboratory. When completed, the results will be incorporated into the RFP Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the RFP Survey. 75 refs., 24 figs., 33 tabs.

  8. Technical Safety Appraisal of the Rocky Flats Plant

    SciTech Connect (OSTI)

    Brown, Blake P.

    1989-01-01T23:59:59.000Z

    This report provides the results of a Technical Safety Appraisal (TSA) of the Rocky Flats Plant (RFP) conducted November 14 to 18 and November 28 to December 9, 1988. This appraisal covered the effectiveness and improvements in the RFP safety program across the site, evaluating progress to date against standards of accepted practice. The appraisal included coverage of the timeliness and effectiveness of actions taken in response to the recommendations/concerns in three previous Technical Safety Appraisals (TSAs) of RFP Bldg. 707 conducted in July 1986, Bldgs. 771/774 conducted in October/November 1986, and Bldgs. 776/777 conducted in January/February 1988. Results of this appraisal are given in Section IV for each of 14 technical safety areas at RFP. These results include a discussion, conclusions and any new safety concerns for each technical safety area. Appendix A contains a description of the system for categorizing concerns, and the concerns are tabulated in Appendix B. Appendix C reports on the evaluation of the contractor's actions and the current status of each of the 230 recommendations and concerns contained in the three previous TSA reports.

  9. Comparison and evaluation of turbulence estimation schemes at Rocky Flats Plant

    SciTech Connect (OSTI)

    Bowen, B.M.; Pamp, S.E.

    1993-10-01T23:59:59.000Z

    The Rocky Flats Plant (RFP) routinely measures meteorological data to support Air Quality and Emergency Response activities. These data help to characterize the transport and dispersion of actual or potential airborne releases of radionuclides or other hazardous materials.

  10. Technical safety appraisal: Buildings 776/777 Rocky Flats Plant

    SciTech Connect (OSTI)

    Field, H C

    1988-03-01T23:59:59.000Z

    Buildings 776/777 at the Rocky Flats Plant are major components of the production complex at the plant site. They have been in operation since 1957. The operations taking place in the buildings are nuclear weapons production support, processing of weapons assemblies returned from Pantex, waste processing, research and development in support of production, special projects, and those generated by support groups, such as maintenance. The appraisal team identified nine deficiencies that it believed required prompt attention. DOE management for EH, the program office (Defense Programs), and the field office analyzed the information provided by the appraisal team and instituted compensatory measures for closer monitoring of contractor activities by knowledgeable DOE staff and staff from other sites. Concurrently, the contractor was requested to address both short-term and long-term remedial measures to correct the identified issues as well as the underlying problems. The contractor has provided his action plan, which is included. This plan was under evaluation by EH and the DOE program office at the time this report was prepared. In addressing the major areas of concern identified above, a well as the specific deficiencies identified by the appraisal team, the contractor and the field office are cautioned to search for the root causes for the problems and to direct corrective actions to those root causes rather than solely to the symptoms to assure the sustainability of the improvements being made. The results of prior TSAs led DOE to conclude that previous corrective actions were not sufficient in that a large number of the individual findings are recurrent. Pending completion of remedial actions over the next few months, enhanced DOE oversight of the contractor is warranted.

  11. EIS-0064: Rocky Flats Plant Site, Jefferson County, Golden, Colorado (see also ERDA-1545-D)

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy developed this statement to evaluate the site specific environmental impacts of continuing to conduct nuclear weapons production activities at the Rocky Flats Plant; alternatives for the conduct of such activities; and environmental impacts of the U.S. policy to produce nuclear weapons.

  12. Project plan: Procedure system design for the Rocky Flats Plant Emergency Preparedness Program

    SciTech Connect (OSTI)

    Hodgin, C.R.; Brown-Strattan, M.

    1989-10-01T23:59:59.000Z

    This procedure system is being designed for the Rocky Flats Plant Emergency Preparedness Program (EPP) to: assess the procedural needs of the Emergency Preparedness Program in light of the existing Rocky Flats Plant policies, plans, procedures, and applicable DOE orders; design the structure of the Emergency Preparedness Program procedural system based on the classes of procedures needed, the types of procedures (procedures vs job outline), the sections of procedures required, and the timetable for procedure maintenance; develop boiler plate formats for the various authors in writing the necessary standardized procedures; develop a list of all the necessary procedures that must be produced for Emergency Preparedness Program; and provide consistency for department-wide activities relating to the quality control in writing, distribution, and revising procedures for Emergency Preparedness Program. 23 refs., 18 figs.

  13. Rocky Flats Plant fluidized-bed incinerator. Engineering design and reference manual

    SciTech Connect (OSTI)

    Meile, L.J.

    1982-11-05T23:59:59.000Z

    The information in this manual is being presented to complete the documentation of the fluidized-bed incineration (FBI) process development at the Rocky Flats Plant. The information pertains to the 82-kg/hour demonstration unit at the Rocky Flats Plant. This document continues the presentation of design reference material in the aeas of equipment drawings, space requirements, and unit costs. In addition, appendices contain an operating procedure and an operational safety analysis of the process. The cost figures presented are based on 1978 dollars and have not been converted to a current dollar value. Also, the cost of modifications are not included, since they would be insignificant if they were incorporated into a new installation.

  14. Historical Exposures to Chemicals at the Rocky Flats Nuclear Weapons Plant: A Pilot Retrospective Exposure Assessment

    SciTech Connect (OSTI)

    Janeen Denise Robertson

    1999-02-01T23:59:59.000Z

    In a mortality study of white males who had worked at the Rocky Flats Nuclear Weapons Plant between 1952 and 1979, an increased number of deaths from benign and unspecified intracranial neoplasms was found. A case-control study nested within this cohort investigated the hypothesis that an association existed between brain tumor death and exposure to either internally deposited plutonium or external ionizing radiation. There was no statistically significant association found between estimated radiation exposure from internally deposited plutonium and the development of brain tumors. Exposure by job or work area showed no significant difference between the cohort and the control groups. An update of the study found elevated risk estimates for (1) all lymphopoietic neoplasms, and (2) all causes of death in employees with body burdens greater than or equal to two nanocuries of plutonium. There was an excess of brain tumors for the entire cohort. Similar cohort studies conducted on worker populations from other plutonium handling facilities have not yet shown any elevated risks for brain tumors. Historically, the Rocky Flats Nuclear Weapons Plant used large quantities of chemicals in their production operations. The use of solvents, particularly carbon tetrachloride, was unique to Rocky Flats. No investigation of the possible confounding effects of chemical exposures was done in the initial studies. The objectives of the present study are to (1) investigate the history of chemical use at the Rocky Flats facility; (2) locate and analyze chemical monitoring information in order to assess employee exposure to the chemicals that were used in the highest volume; and (3) determine the feasibility of establishing a chemical exposure assessment model that could be used in future epidemiology studies.

  15. Computerization upgrade project for the Rocky Flats Plant Critical Mass Laboratory Reactor Control Console

    SciTech Connect (OSTI)

    Bachman, H.C.; Miles, R.E.; Sachs, R.D.

    1987-01-01T23:59:59.000Z

    This report discusses present and planned future work on computerization of the Rocky Flats Plant (RFP) Critical Mass Laboratory (CML) Nuclear Reactor Control Console. No computerized control functions are planned or anticipated at this time. The scope of this computerization effort is limited to Data Acquisition and Analysis. In this work an IBM-PC will be connected to four (4) Nuclear Safety channels, and two (2) nonnuclear safety channels. Programming is being done in interpretive advanced BASIC. At the present time only two channels, Linear Picoammeters 1 and 2, are having their signals processed by the IBM-PC.

  16. Rebaselining seismic risks for resumption of Building 707 plutonium operations at the Rocky Flats Plant

    SciTech Connect (OSTI)

    Elia, F. Jr. [Stone and Webster Engineering Corp., Boston, MA (United States); Foppe, T.; Stahlnecker, E. [EG and G Rocky Flats, Inc., Golden, CO (United States)

    1993-08-01T23:59:59.000Z

    Natural phenomena risks have been assessed for plutonium handling facilities at the Rocky Flats Plant, based on numerous studies performed for the Department of Energy Natural Phenomena Hazards Project. The risk assessment was originally utilized in the facilities Final Safety Analysis Reports and in subsequent risk management decisions. Plutonium production operations were curtailed in 1989 in order for a new operating contractor to implement safety improvements. Since natural phenomena events dominated risks to the public, a re-assessment of these events were undertaken for resumption of plutonium operations.

  17. Evaluation of Rocky Flats Plant stored plutonium inventory at the Idaho National Engineering Laboratory

    SciTech Connect (OSTI)

    Clements, T.L. Jr.; Einerson, J.J.

    1995-09-01T23:59:59.000Z

    The purpose of this document is to evaluate reported inventories of plutonium contained in stored transuranic (TRU) waste generated by the Rocky Flats Plant (RFP). From 1970 to 1989, this waste was shipped to the Idaho National Engineering Laboratory (INEL) and placed in aboveground retrievable storage at the Radioactive Waste Management Complex (RWMC)-Transuranic Storage Area (TSA). This evaluation was initiated to address potential uncertainty in quantities of stored plutonium reported in the Radioactive Waste Management Information System (RWMIS). The RWMIS includes radionuclide information from generators that shipped TRU waste to INEL for storage. Recent evaluations performed on buried TRU waste (1954-1970) resulted in significant revision to the original reported values of plutonium, americium, and enriched uranium. These evaluations were performed based on Rocky Flats Plant (RFP) Inventory Difference (ID) records. This evaluation for stored TRU waste was performed to: (1) identify if significant discrepancies exist between RWMIS reported values and RFP ID records, (2) describe the methodology used to perform the RWMIS evaluation, (3) determine a Best Estimate (BE) and 95% Upper Confidence Bound (UB) on the plutonium inventory, (4) provide conclusions based on this evaluation, and (5) identify recommendations and/or actions that might be needed.

  18. History of Uranium-233(sup233U)Processing at the Rocky Flats Plant. In support of the RFETS Acceptable Knowledge Program

    SciTech Connect (OSTI)

    Moment, R.L.; Gibbs, F.E.; Freiboth, C.J.

    1999-04-01T23:59:59.000Z

    This report documents the processing of Uranium-233 at the Rocky Flats Plant (Rocky Flats Environmental Technology Site). The information may be used to meet Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria (WAC)and for determining potential Uranium-233 content in applicable residue waste streams.

  19. Environmental standards setting for Rocky Flats Plant: The pursuit of zero risk

    SciTech Connect (OSTI)

    Daugherty, N.M.

    1992-01-01T23:59:59.000Z

    The Rocky Flats Plant (RFP) is a Department of Energy facility, located near Denver, Colorado, whose primary mission has been the fabrication of nuclear weapons components using plutonium, uranium, beryllium, and stainless steel. Past RFP activities have resulted in contamination of soil, surface water, sediment, and ground water with radioactive and/or hazardous chemical constituents. Although RFP environmental contamination levels generally are low in comparison to other DOE sites, close proximity to the Denver metropolitan area has resulted in proposed and implemented RFP environmental protection standards which are far more stringent than those for comparable facilities in the nation. The RFP experience with State and local involvement in standards setting, which often bypasses the traditional organizations and recommendations for radiation protection, may set precedence for future environmental radiation protection at other nuclear facilities.

  20. Environmental standards setting for Rocky Flats Plant: The pursuit of zero risk

    SciTech Connect (OSTI)

    Daugherty, N.M.

    1992-11-01T23:59:59.000Z

    The Rocky Flats Plant (RFP) is a Department of Energy facility, located near Denver, Colorado, whose primary mission has been the fabrication of nuclear weapons components using plutonium, uranium, beryllium, and stainless steel. Past RFP activities have resulted in contamination of soil, surface water, sediment, and ground water with radioactive and/or hazardous chemical constituents. Although RFP environmental contamination levels generally are low in comparison to other DOE sites, close proximity to the Denver metropolitan area has resulted in proposed and implemented RFP environmental protection standards which are far more stringent than those for comparable facilities in the nation. The RFP experience with State and local involvement in standards setting, which often bypasses the traditional organizations and recommendations for radiation protection, may set precedence for future environmental radiation protection at other nuclear facilities.

  1. Acceptable knowledge document for INEEL stored transuranic waste -- Rocky Flats Plant waste. Revision 2

    SciTech Connect (OSTI)

    NONE

    1998-01-23T23:59:59.000Z

    This document and supporting documentation provide a consistent, defensible, and auditable record of acceptable knowledge for waste generated at the Rocky Flats Plant which is currently in the accessible storage inventory at the Idaho National Engineering and Environmental Laboratory. The inventory consists of transuranic (TRU) waste generated from 1972 through 1989. Regulations authorize waste generators and treatment, storage, and disposal facilities to use acceptable knowledge in appropriate circumstances to make hazardous waste determinations. Acceptable knowledge includes information relating to plant history, process operations, and waste management, in addition to waste-specific data generated prior to the effective date of the RCRA regulations. This document is organized to provide the reader a comprehensive presentation of the TRU waste inventory ranging from descriptions of the historical plant operations that generated and managed the waste to specific information about the composition of each waste group. Section 2 lists the requirements that dictate and direct TRU waste characterization and authorize the use of the acceptable knowledge approach. In addition to defining the TRU waste inventory, Section 3 summarizes the historical operations, waste management, characterization, and certification activities associated with the inventory. Sections 5.0 through 26.0 describe the waste groups in the inventory including waste generation, waste packaging, and waste characterization. This document includes an expanded discussion for each waste group of potential radionuclide contaminants, in addition to other physical properties and interferences that could potentially impact radioassay systems.

  2. Rocky Flats Environmental Technology Site Archived Soil & Groundwater...

    Office of Environmental Management (EM)

    Rocky Flats Environmental Technology Site Archived Soil & Groundwater Master Reports Rocky Flats Environmental Technology Site Archived Soil & Groundwater Master Reports Rocky...

  3. Independent Oversight Review, Rocky Flats Environmental Technology...

    Energy Savers [EERE]

    - March 2000 March 2000 Review of the Rocky Flats Environmental Technology Site Transportation Emergency Management Program This report provides the results of an independent...

  4. The Department of Energy`s Rocky Flats Plant: A guide to record series useful for health-related research. Volume VI, workplace and environmental monitoring

    SciTech Connect (OSTI)

    NONE

    1995-08-01T23:59:59.000Z

    This is the sixth in a series of seven volumes which constitute a guide to records of the Rocky Flats Plant useful for conducting health-related research. The primary purpose of Volume VI is to describe record series pertaining to workplace and environmental monitoring activities at the Department of Energy`s (DOE) Rocky Flats Plant, now named the Rocky Flats Environmental Technology Site, near Denver, Colorado. History Associates Incorporated (HAI) prepared this guide as part of its work as the support services contractor for DOE`s Epidemiologic Records Inventory Project. This introduction briefly describes the Epidemiologic Records Inventory Project and HAI`s role in the project, provides a history of workplace and environmental monitoring practices at Rocky Flats, and identifies organizations contributing to workplace and environmental monitoring policies and activities. Other topics include the scope and arrangement of this volume and the organization to contact for access to these records. Comprehensive introductory and background information is available in Volume I. Other volumes in the guide pertain to administrative and general subjects, facilities and equipment, production and materials handling, waste management, and employee health. In addition, HAI has produced a subject-specific guide, titled The September 1957 Rocky Flats Fire. A Guide to Record Series of the Department of Energy and Its Contractors, which researchers should consult for further information about records related to this incident.

  5. LM Records Handling System (LMRHS01) - Rocky Flats Environmental...

    Office of Environmental Management (EM)

    LM Records Handling System (LMRHS01) - Rocky Flats Environmental Records Database, Office of Legacy Management LM Records Handling System (LMRHS01) - Rocky Flats Environmental...

  6. Risk, media, and stigma at Rocky Flats

    SciTech Connect (OSTI)

    Flynn, J.; Peters, E.; Mertz, C.K.; Slovic, P. [Decision Research, Eugene, OR (United States)] [Decision Research, Eugene, OR (United States)

    1998-12-01T23:59:59.000Z

    Public responses to nuclear technologies are often strongly negative. Events, such as accidents or evidence of unsafe conditions at nuclear facilities, receive extensive and dramatic coverage by the news media. These news stories affect public perceptions of nuclear risks and the geographic areas near nuclear facilities. One result of these perceptions, avoidance behavior, is a form of technological stigma that leads to losses in property values near nuclear facilities. The social amplification of risk is a conceptual framework that attempts to explain how stigma is created through media transmission of information about hazardous places and public perceptions and decisions. This paper examines stigma associated with the US Department of energy`s Rocky Flats facility, a major production plant in the nation`s nuclear weapons complex, located near Denver, Colorado. This study, based upon newspaper analyses and a survey of Denver area residents, finds that the social amplification theory provides a reasonable framework for understanding the events and public responses that took place in regard to Rocky Flats during a 6-year period, beginning with an FBI raid of the facility in 1989.

  7. Report of the oversight assessment of the operational readiness review of the Rocky Flats Plant, Building 707

    SciTech Connect (OSTI)

    Krupar, J.J. Jr.

    1992-12-18T23:59:59.000Z

    This report presents the results of an oversight assessment (OA) conducted by the US Department of Energy`s (DOE) office of Environment, Safety and Health (EH) of the Operational Readiness Review (ORR) activities for the resumption of Building 707 operations at the Rocky Flats Plant (RFP). The EH OA was simultaneously conducted with the Office of Defense Programs (DP) line management ORR, which was conducted from September 21 to October 2, 1992, and November 2 to 13, 1992. The EH OA evaluated the comprehensiveness and effectiveness of the DP ORR. Based on its oversight assessment, the EH OA believes that Building 707 operations may be safely resumed contingent upon satisfactory resolution of all DP ORR findings. The EH OA determined that the DP ORR was conducted in a comprehensive and effective manner and represents an adequate basis for recommending resumption of Building 707 operations. The EH OA was based primarily on an evaluation of the comprehensiveness and effectiveness of the DP ORR and addressed the following areas: Management and Organization, Industrial Safety, Fire Protection, Industrial Hygiene, Conduct of Operations, Maintenance, Quality Assurance, and Training. In a limited number of these areas, the EH OA conducted independent vertical-slice reviews DP ORR results.

  8. Report of the oversight assessment of the operational readiness review of the Rocky Flats Plant, Building 707

    SciTech Connect (OSTI)

    Krupar, J.J. Jr.

    1992-12-18T23:59:59.000Z

    This report presents the results of an oversight assessment (OA) conducted by the US Department of Energy's (DOE) office of Environment, Safety and Health (EH) of the Operational Readiness Review (ORR) activities for the resumption of Building 707 operations at the Rocky Flats Plant (RFP). The EH OA was simultaneously conducted with the Office of Defense Programs (DP) line management ORR, which was conducted from September 21 to October 2, 1992, and November 2 to 13, 1992. The EH OA evaluated the comprehensiveness and effectiveness of the DP ORR. Based on its oversight assessment, the EH OA believes that Building 707 operations may be safely resumed contingent upon satisfactory resolution of all DP ORR findings. The EH OA determined that the DP ORR was conducted in a comprehensive and effective manner and represents an adequate basis for recommending resumption of Building 707 operations. The EH OA was based primarily on an evaluation of the comprehensiveness and effectiveness of the DP ORR and addressed the following areas: Management and Organization, Industrial Safety, Fire Protection, Industrial Hygiene, Conduct of Operations, Maintenance, Quality Assurance, and Training. In a limited number of these areas, the EH OA conducted independent vertical-slice reviews DP ORR results.

  9. The Critical Mass Laboratory at Rocky Flats

    SciTech Connect (OSTI)

    Rothe, Robert E

    2003-10-15T23:59:59.000Z

    The Critical Mass Laboratory (CML) at Rocky Flats northwest of Denver, Colorado, was built in 1964 and commissioned to conduct nuclear experiments on January 28, 1965. It was built to attain more accurate and precise experimental data to ensure nuclear criticality safety at the plant than were previously possible. Prior to its construction, safety data were obtained from long extrapolations of subcritical data (called in situ experiments), calculated parameters from reactor engineering 'models', and a few other imprecise methods. About 1700 critical and critical-approach experiments involving several chemical forms of enriched uranium and plutonium were performed between then and 1988. These experiments included single units and arrays of fissile materials, reflected and 'bare' systems, and configurations with various degrees of moderation, as well as some containing strong neutron absorbers. In 1989, a raid by the Federal Bureau of Investigation (FBI) caused the plant as a whole to focus on 'resumption' instead of further criticality safety experiments. Though either not recognized or not admitted for a few years, that FBI raid did sound the death knell for the CML. The plant's optimistic goal of resumption evolved to one of deactivation, decommissioning, and plantwide demolition during the 1990s. The once-proud CML facility was finally demolished in April of 2002.

  10. The Department of Energy`s Rocky Flats Plant: A guide to record series useful for health-related research. Volume I, introduction

    SciTech Connect (OSTI)

    NONE

    1995-08-01T23:59:59.000Z

    This guide consists of seven volumes which describe records useful for conducting health-related research at the DOE`s Rocky Flats Plant. Volume I is an introduction, and the remaining six volumes are arranged by the following categories: administrative and general, facilities and equipment, production and materials handling, waste management, workplace and environmental monitoring, and employee occupational exposure and health. Volume I briefly describes the Epidemiologic Records Project and provides information on the methodology used to inventory and describe the records series contained in subsequent volumes. Volume II describes records concerning administrative functions and general information. Volume III describes records series relating to the construction and routine maintenance of plant buildings and the purchase and installation of equipment. Volume IV describes records pertaining to the inventory and production of nuclear materials and weapon components. Records series include materials inventories, manufacturing specifications, engineering orders, transfer and shipment records, and War Reserve Bomb Books. Volume V describes records series pertaining to the storage, handling, treatment, and disposal of radioactive, chemical, or mixed materials produced or used at Rocky Flats. Volume VI describes records series pertaining to monitoring of the workplace and of the environment outside of buildings onsite and offsite. Volume VII describes records series pertaining to the health and occupational exposures of employees and visitors.

  11. EIS-0276: Rocky Flats Plutonium Storage, Golden, Colorado

    Broader source: Energy.gov [DOE]

    This EIS analyzes DOE's proposed action to provide safe interim storage of approximately 10 metric tons of plutonium at the Rocky Flats Environmental Technology Site (RFETS).

  12. 2006 Annual Ecology Report for the Rocky Flats Site

    Office of Legacy Management (LM)

    Ecology Report for the Rocky Flats Site Click on the links below to access different portions of the electronic annual report. 2006 Annual Report Sections Diffuse Knapweed...

  13. Preliminary Notice of Violation , Rocky Flats Environmental Technology...

    Broader source: Energy.gov (indexed) [DOE]

    deficiencies associated two events in March and April 1996 that resulted in the spread of contamination and personnel uptakes of radioactive material at the Rocky Flats...

  14. Map of mixed prairie grassland vegetation, Rocky Flats, Colorado

    SciTech Connect (OSTI)

    Clark, S J.V.; Webber, P J; Komarkova, V; Weber, W A

    1980-01-01T23:59:59.000Z

    A color vegetation map at the scale of 1:12,000 of the area surrounding the Rocky Flats, Rockwell International Plant near Boulder, Colorado, provides a permanent record of baseline data which can be used to monitor changes in both vegetation and environment and thus to contribute to future land management and land-use policies. Sixteen mapping units based on species composition were identified, and characterized by two 10-m/sup 2/ vegetation stands each. These were grouped into prairie, pasture, and valley side on the basis of their species composition. Both the mapping units and these major groups were later confirmed by agglomerative clustering analysis of the 32 vegetation stands on the basis of species composition. A modified Bray and Curtis ordination was used to determine the environmental factor complexes controlling the distribution of vegetation at Rocky flats. Recommendations are made for future policies of environmental management and predictions of the response to environmental change of the present vegetation at the Rocky Flats site.

  15. Rocky Flats Neutron Detector Testing at Valduc, France

    SciTech Connect (OSTI)

    Kim, S S; Dulik, G M

    2011-01-03T23:59:59.000Z

    Recent program requirements of the US Department of Energy/NNSA have led to a need for a criticality accident alarm system to be installed at a newly activated facility. The Criticality Safety Group of the Lawrence Livermore National Laboratory (LLNL) was able to recover and store for possible future use approximately 200 neutron criticality detectors and 20 master alarm panels from the former Rocky Flats Plant in Golden, Colorado when the plant was closed. The Criticality Safety Group participated in a facility analysis and evaluation, the engineering design and review process, as well as the refurbishment, testing, and recalibration of the Rocky Flats criticality alarm system equipment to be used in the new facility. In order to demonstrate the functionality and survivability of the neutron detectors to the effects of an actual criticality accident, neutron detector testing was performed at the French CEA Valduc SILENE reactor from October 7 to October 19, 2010. The neutron detectors were exposed to three criticality events or pulses generated by the SILENE reactor. The first excursion was performed with a bare or unshielded reactor, and the second excursion was made with a lead shielded/reflected reactor, and the third excursion with a polyethylene reflected core. These tests of the Rocky Flats neutron detectors were performed as a part of the 2010 Criticality Accident Alarm System Benchmark Measurements at the SILENE Reactor. The principal investigators for this series of experiments were Thomas M. Miller and John C. Wagner of the Oak Ridge National Laboratory, with Nicolas Authier and Nathalie Baclet of CEA Valduc. Several other organizations were also represented, including the Y-12 National Security Complex, Lawrence Livermore National Laboratory, Los Alamos National Laboratory, CEA Saclay, and Babcock International Group.

  16. A research study to determine the effect of Total Quality Management (TQM) on employee morale in Plant Procedures Division at EG&G, Rocky Flats, Inc.

    SciTech Connect (OSTI)

    Casey, E.F.

    1994-01-01T23:59:59.000Z

    EG&G at Rocky Flats, Golden, Colorado, experienced a high amount of low morale, due to the plant site having been designated to close, and the uneasiness of the working force was very visible. Some employees accepted early retirement in October 1992, however, all received letters of 120 days notice in March 1993, and were advised several cuts Would be made by October 1, 1993. This information alone caused many insecurities in employees, and caused morale to decrease even more. This is an in depth study of morale, which was upgraded in Plant Procedures Group (PPG), through the effect of TQM. The primary research included a survey of employees with results included. The study also increased additional questions in PPG, some of which were added to the agenda of the Process Improvement Team (PIT) to improve PPG in the eyes of customers. Statistics did show that morale improved, not necessarily because of TQM or the progress of the Process Improvement Team (PIT), but due to efforts of the staff implementing the principles of TQM the best they knew how.

  17. Idaho National Engineering Laboratory code assessment of the Rocky Flats transuranic waste

    SciTech Connect (OSTI)

    NONE

    1995-07-01T23:59:59.000Z

    This report is an assessment of the content codes associated with transuranic waste shipped from the Rocky Flats Plant in Golden, Colorado, to INEL. The primary objective of this document is to characterize and describe the transuranic wastes shipped to INEL from Rocky Flats by item description code (IDC). This information will aid INEL in determining if the waste meets the waste acceptance criteria (WAC) of the Waste Isolation Pilot Plant (WIPP). The waste covered by this content code assessment was shipped from Rocky Flats between 1985 and 1989. These years coincide with the dates for information available in the Rocky Flats Solid Waste Information Management System (SWIMS). The majority of waste shipped during this time was certified to the existing WIPP WAC. This waste is referred to as precertified waste. Reassessment of these precertified waste containers is necessary because of changes in the WIPP WAC. To accomplish this assessment, the analytical and process knowledge available on the various IDCs used at Rocky Flats were evaluated. Rocky Flats sources for this information include employee interviews, SWIMS, Transuranic Waste Certification Program, Transuranic Waste Inspection Procedure, Backlog Waste Baseline Books, WIPP Experimental Waste Characterization Program (headspace analysis), and other related documents, procedures, and programs. Summaries are provided of: (a) certification information, (b) waste description, (c) generation source, (d) recovery method, (e) waste packaging and handling information, (f) container preparation information, (g) assay information, (h) inspection information, (i) analytical data, and (j) RCRA characterization.

  18. Commercial Decommissioning at DOE's Rocky Flats

    SciTech Connect (OSTI)

    Freiboth, C.; Sandlin, N.; Schubert, A.; Hansen, S.

    2002-02-25T23:59:59.000Z

    Due in large part to the number of nuclear facilities that make up the DOE complex, DOE-EM work has historically been paperwork intensive and driven by extensive regulations. Requirements for non-nuclear facilities are often grouped with those of nuclear facilities, driving up costs. Kaiser-Hill was interested in applying a commercial model to demolition of these facilities and wanted to apply necessary and sufficient standards to the work activities, but avoid applying unnecessary requirements. Faced with demolishing hundreds of uncontaminated or non-radiologically contaminated facilities, Kaiser-Hill has developed a subcontracting strategy to drastically reduce the cost of demolishing these facilities at Rocky Flats. Aiming to tailor the demolition approach of such facilities to more closely follow commercial practices, Kaiser-Hill recently released a Request for Proposals (RFP) for the demolition of the site's former central administration facility. The RFP significantly reduced requirements for compliance with specific DOE directives. Instead, the RFP required subcontractors to comply with health and safety requirements commonly found in the demolition of similar facilities in a commercial setting. This resulted in a number of bids from companies who have normally not bid on DOE work previously and at a reduced cost over previous approaches. This paper will discuss the details of this subcontracting strategy.

  19. An assessment and evaluation for recycle/reuse of contaminated process and metallurgical equipment at the DOE Rocky Flats Plant Site -- Building 865. Final report

    SciTech Connect (OSTI)

    Not Available

    1993-08-01T23:59:59.000Z

    An economic analysis of the potential advantages of alternatives for recycling and reusing equipment now stored in Building 865 at the Rocky Flats Plant (RFP) in Colorado has been conducted. The inventory considered in this analysis consists primarily of metallurgical and process equipment used before January 1992, during development and production of nuclear weapons components at the site. The economic analysis consists of a thorough building inventory and cost comparisons for four equipment dispositions alternatives. The first is a baseline option of disposal at a Low Level Waste (LLW) landfill. The three alternatives investigated are metal recycling, reuse with the government sector, and release for unrestricted use. This report provides item-by-item estimates of value, disposal cost, and decontamination cost. The economic evaluation methods documented here, the simple cost comparisons presented, and the data provided as a supplement, should provide a foundation for D&D decisions for Building 865, as well as for similar D&D tasks at RFP and at other sites.

  20. Epidemiologic surveillance. Annual report for EG&G Rocky Flats

    SciTech Connect (OSTI)

    NONE

    1994-12-31T23:59:59.000Z

    Epidemiologic surveillance at U.S. Department of Energy (DOE) facilities consists of regular and systematic collection, analysis, and interpretation of data on absences resulting from illness and injury in the work force. Its purpose is to provide an early warning system for health problems occurring among employees at participating sites. Data are collected by coordinators at each site and submitted to the Epidemiologic Surveillance Data Center, located at the Oak Ridge Institute for Science and Education, where quality control procedures and analyses are carried out. Rates of absences and rates of diagnoses associated with absences are analyzed by occupation and other relevant variables. They may be compared with the disease experience of different groups within the DOE work force and with populations that do not work for DOE to identify disease patterns or clusters that may be associated with work activities. This report presents the 1994 morbidity data for the Rocky Flats plant.

  1. Rocky Flats Cleanup Agreement implementation successes and challenges

    SciTech Connect (OSTI)

    Shelton, D.C.

    1997-02-01T23:59:59.000Z

    On July 19, 1996 the US Department of Energy (DOE), State of Colorado (CDPHE), and US Environmental Protection Agency (EPA) entered into an agreement called the Rocky Flats Cleanup Agreement (RFCA) for the cleanup and closure of the Rocky Flats Environmental Technology Site (RFETS or Rocky Flats). Major elements of the agreement include: an Integrated Site-Wide Baseline; up to twelve significant enforceable milestones per year; agreed upon soil and water action levels and standards for cleanup; open space as the likely foreseeable land use; the plutonium and TRU waste removed by 2015; streamlined regulatory process; agreement with the Defense Nuclear Facilities Safety Board (DNFSB) to coordinate activities; and a risk reduction focus. Successful implementation of RFCA requires a substantial effort by the parties to change their way of thinking about RFETS and meet the deliverables and commitments. Substantial progress toward Site closure through the implementation of RFCA has been accomplished in the short time since the signing, yet much remains to be done. Much can be learned from the Rocky Flats experience by other facilities in similar situations.

  2. NATURAL HERITAGE RESOURCES OF THE ROCKY FLATS ENVIRONMENTAL TECHNOLOGY SITE

    E-Print Network [OSTI]

    NATURAL HERITAGE RESOURCES OF THE ROCKY FLATS ENVIRONMENTAL TECHNOLOGY SITE AND THEIR CONSERVATION. Dr. Fred Harrington, Dr. Mark Bakeman, and Alison Deans of the Pawnee Natural History Society Environmental Technology Site (RFETS). The exclusion of the general public over the last 20 to 40 years has

  3. Facility overview for commercial application of selected Rocky Flats facilities

    SciTech Connect (OSTI)

    NONE

    1996-11-01T23:59:59.000Z

    The purpose of this Facility Overview is to support the Rocky Flats Local Impacts Initiative`s Request for Interest, to solicit interest from commercial corporations for utilizing buildings 865 and 883, and the equipment contained within each building, for a commercial venture. In the following sections, this document describes the Rocky Flats Site, the buildings available for lease, the equipment within these buildings, the site services available to a tenant, the human resources available to support operations in buildings 865 and 883, and the environmental condition of the buildings and property. In addition, a brief description is provided of the work performed to date to explore the potential products that might be manufactured in Buildings 865 and 883, and the markets for these products.

  4. Tools for Closure Project and Contract Management: Development of the Rocky Flats Integrated Closure Project Baseline

    SciTech Connect (OSTI)

    Gelles, C. M.; Sheppard, F. R.

    2002-02-26T23:59:59.000Z

    This paper details the development of the Rocky Flats Integrated Closure Project Baseline - an innovative project management effort undertaken to ensure proactive management of the Rocky Flats Closure Contract in support of the Department's goal for achieving the safe closure of the Rocky Flats Environmental Technology Site (RFETS) in December 2006. The accelerated closure of RFETS is one of the most prominent projects within the Department of Energy (DOE) Environmental Management program. As the first major former weapons plant to be remediated and closed, it is a first-of-kind effort requiring the resolution of multiple complex technical and institutional challenges. Most significantly, the closure of RFETS is dependent upon the shipment of all special nuclear material and wastes to other DOE sites. The Department is actively working to strengthen project management across programs, and there is increasing external interest in this progress. The development of the Rocky Flats Integrated Closure Project Baseline represents a groundbreaking and cooperative effort to formalize the management of such a complex project across multiple sites and organizations. It is original in both scope and process, however it provides a useful precedent for the other ongoing project management efforts within the Environmental Management program.

  5. DECOMMISSIONING CHALLENGES AT THE ROCKY FLATS ENVIRONMENTAL TECHNOLOGY SITE

    SciTech Connect (OSTI)

    Dorr, K. A.; Hoover, J.

    2002-02-25T23:59:59.000Z

    This paper presents a discussion of the demolition of the Building 788 cluster at the Rocky Flats Environmental Technology Site (RFETS) in Golden, Colorado. The Building 788 Cluster was a Resource Conservation and Recovery Act (RCRA) permitted storage facilities and ancillary structures. Topics covered include the methods employed for Project Planning, Regulatory Compliance, Waste Management, Hazard Identification, Radiological Controls, Risk Management, Field Implementation, and Cost Schedule control, and Lessons Learned and Project Closeout.

  6. ROCKY FLATS CLOSURE PROJECT EM, AUG 2006 | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power Systems Engineering Research and DevelopmentDepartmentinBattery TechnologyJanuaryROCKY FLATS

  7. DOE - Office of Legacy Management -- Rocky Flats SOG

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545*. . : '* FEB 1972.SOG Rocky Flats Site,

  8. Evaluation of safety assessment methodologies in Rocky Flats Risk Assessment Guide (1985) and Building 707 Final Safety Analysis Report (1987)

    SciTech Connect (OSTI)

    Walsh, B.; Fisher, C.; Zigler, G.; Clark, R.A. [Science and Engineering Associates, Inc., Albuquerque, NM (United States)

    1990-11-09T23:59:59.000Z

    FSARs. Rockwell International, as operating contractor at the Rocky Flats plant, conducted a safety analysis program during the 1980s. That effort resulted in Final Safety Analysis Reports (FSARs) for several buildings, one of them being the Building 707 Final Safety Analysis Report, June 87 (707FSAR) and a Plant Safety Analysis Report. Rocky Flats Risk Assessment Guide, March 1985 (RFRAG85) documents the methodologies that were used for those FSARs. Resources available for preparation of those Rocky Flats FSARs were very limited. After addressing the more pressing safety issues, some of which are described below, the present contractor (EG&G) intends to conduct a program of upgrading the FSARs. This report presents the results of a review of the methodologies described in RFRAG85 and 707FSAR and contains suggestions that might be incorporated into the methodology for the FSAR upgrade effort.

  9. Geologic and geotechnical assessment RFETS Building 371, Rocky Flats, Colorado

    SciTech Connect (OSTI)

    Maryak, M.E.; Wyatt, D.E.; Bartlett, S.F.; Lewis, M.R.; Lee, R.C.

    1995-12-13T23:59:59.000Z

    This report describes the review and evaluation of the geological, geotechnical and geophysical data supporting the design basis analysis for the Rocky Flats Environmental Test Site (RFETS) Building 371. The primary purpose of the geologic and geotechnical reviews and assessments described herein are to assess the adequacy of the crustal and near surface rock and soil model used in the seismic analysis of Building 371. This review was requested by the RFETS Seismic Evaluation Program. The purpose was to determine the adequacy of data to support the design basis for Building 371, with respect to seismic loading. The objectives required to meet this goal were to: (1) review techniques used to gather data (2) review analysis and interpretations of the data; and (3) make recommendations to gather additional data if required. Where there were questions or inadequacies in data or interpretation, recommendations were made for new data that will support the design basis analysis and operation of Building 371. In addition, recommendations are provided for a geologic and geophysical assessment for a new facility at the Rocky Flats Site.

  10. DISPOSITION PATHS FOR ROCKY FLATS GLOVEBOXES: EVALUATING OPTIONS

    SciTech Connect (OSTI)

    Lobdell, D.; Geimer, R.; Larsen, P.; Loveland, K.

    2003-02-27T23:59:59.000Z

    The Kaiser-Hill Company, LLC has the responsibility for closure activities at the Rocky Flats Environmental Technology Site (RFETS). One of the challenges faced for closure is the disposition of radiologically contaminated gloveboxes. Evaluation of the disposition options for gloveboxes included a detailed analysis of available treatment capabilities, disposal facilities, and lifecycle costs. The Kaiser-Hill Company, LLC followed several processes in determining how the gloveboxes would be managed for disposition. Currently, multiple disposition paths have been chosen to accommodate the needs of the varying styles and conditions of the gloveboxes, meet the needs of the decommissioning team, and to best manage lifecycle costs. Several challenges associated with developing a disposition path that addresses both the radiological and RCRA concerns as well as offering the most cost-effective solution were encountered. These challenges included meeting the radiological waste acceptance criteria of available disposal facilities, making a RCRA determination, evaluating treatment options and costs, addressing void requirements associated with disposal, and identifying packaging and transportation options. The varying disposal facility requirements affected disposition choices. Facility conditions that impacted decisions included radiological and chemical waste acceptance criteria, physical requirements, and measurement for payment options. The facility requirements also impacted onsite activities including management strategies, decontamination activities, and life-cycle cost.

  11. VWZ-0008- In the Matter of EG&G Rocky Flats, Inc.

    Broader source: Energy.gov [DOE]

    This decision will consider a Motion for Partial Dismissal and Limitation on Scope of Complainant's Claims filed by EG&G Rocky Flats, Inc. (EG&G) on June 13, 1997. In its motion, EG&G...

  12. EA-1146: Radioactive Waste Storage at Rocky Flats Environmental Technology Site, Golden, Colorado

    Broader source: Energy.gov [DOE]

    This EA evaluates the environmental impacts of the proposal to convert buildings at the U.S. Department of Energy Rocky Flats Environmental Technology Site from their former uses to interim waste...

  13. DOE's Rocky Flats Cleanup Site Named 2006 Project of the Year...

    Office of Environmental Management (EM)

    U.S. Department of Energy (DOE) today announced that the Project Management Institute (PMI) has awarded its 2006 Project of the Year to DOE's Rocky Flats Environmental Technology...

  14. Evaluation of Vitrification Processing Step for Rocky Flats Incinerator Ash

    SciTech Connect (OSTI)

    Wigent, W.L.; Luey, J.K.; Scheele, R.D.; Li, H.

    1999-04-08T23:59:59.000Z

    In 1997, Pacific Northwest National Laboratory (PNNL) staff developed a processing option for incinerator ash at the Rocky Flats Environmental Technology Sites (RFETS). This work was performed with support from Los Alamos National Laboratory (LANL) and Safe Sites of Colorado (SSOC). A description of the remediation needs for the RFETS incinerator ash is provided in a report summarizing the recommended processing option for treatment of the ash (Lucy et al. 1998). The recommended process flowsheet involves a calcination pretreatment step to remove carbonaceous material followed by a vitrification processing step for a mixture of glass tit and calcined incinerator ash. Using the calcination pretreatment step to remove carbonaceous material reduced process upsets for the vitrification step, allowed for increased waste loading in the final product, and improved the quality of the final product. Figure 1.1 illustrates the flow sheet for the recommended processing option for treatment of RFETS incinerator ash. In 1998, work at PNNL further developed the recommended flow sheet through a series of studies to better define the vitrification operating parameters and to address secondary processing issues (such as characterizing the offgas species from the calcination process). Because a prototypical rotary calciner was not available for use, studies to evaluate the offgas from the calcination process were performed using a benchtop rotary calciner and laboratory-scale equipment (Lucy et al. 1998). This report focuses on the vitrification process step after ash has been calcined. Testing with full-scale containers was performed using ash surrogates and a muffle furnace similar to that planned for use at RFETS. Small-scale testing was performed using plutonium-bearing incinerator ash to verify performance of the waste form. Ash was not obtained from RFETS because of transportation requirements to calcine the incinerator ash prior to shipment of the material. Because part of PNNL's work was to characterize the ash prior to calcination and to investigate the effect of calcination on product quality, representative material was obtained from LANL. Ash obtained from LANL was selected based on its similarity to that currently stored at RFETS. The plutonium-bearing ashes obtained from LANL are likely from a RFETS incinerator, but the exact origin was not identified.

  15. Hanford/Rocky Flats collaboration on development of supercritical carbon dioxide extraction to treat mixed waste

    SciTech Connect (OSTI)

    Hendrickson, D.W.; Biyani, R.K. [Westinghouse Hanford Co., Richland, WA (United States); Brown, C.M.; Teter, W.L. [Kaiser-Hill Co., Golden, CO (United States)

    1995-11-01T23:59:59.000Z

    Proposals for demonstration work under the Department of Energy`s Mixed Waste Focus Area, during the 1996 through 1997 fiscal years included two applications of supercritical carbon dioxide to mixed waste pretreatment. These proposals included task RF15MW58 of Rocky Flats and task RL46MW59 of Hanford. Analysis of compatibilities in wastes and work scopes yielded an expectation of substantial collaboration between sites whereby Hanford waste streams may undergo demonstration testing at Rocky Flats, thereby eliminating the need for test facilities at Hanford. This form of collaboration is premised the continued deployment at Rocky Flats and the capability for Hanford samples to be treated at Rocky Flats. The recent creation of a thermal treatment contract for a facility near Hanford may alleviate the need to conduct organic extraction upon Rocky Flats wastes by providing a cost effective thermal treatment alternative, however, some waste streams at Hanford will continue to require organic extraction. Final site waste stream treatment locations are not within the scope of this document.

  16. Characterization of uranium in surface-waters collected at the Rocky Flats Facility

    SciTech Connect (OSTI)

    Efurd, D.W.; Rokop, D.J.; Aguilar, R.D.; Roensch, F.R.; Perrin, R.E.; Banar, J.C.

    1994-06-01T23:59:59.000Z

    The Rocky Flats Plant (RFP) is a Department of Energy (DOE) facility where plutonium and uranium components were manufactured for nuclear weapons. During plant operations radioactivity was inadvertently released into the environment. This study was initiated to characterize the uranium present in surface-waters at RFP. Three drainage basins and natural ephemeral streams transverse RFP. The Woman Creek drainage basin traverses and drains the southern portion of the site. The Rock Creek drainage basin drains the northwestern portion of the plant complex. The Walnut Creek drainage basin traverses the western, northern, and northeastern portions of the RFP site. Dams, detention ponds, diversion structures, and ditches have been constructed at RFP to control the release of plant discharges and surface (storm water) runoff. The ponds located downstream of the plant complex on North Walnut Creek are designated A-1 through A-4. Ponds on South Walnut Creek are designated B-1 through B-5. The ponds in the Woman Creek drainage basin are designated C-1 and C-2. Water samples were collected from each pond and the uranium was characterized by TIMS measurement techniques.

  17. Evaluation of prospective hazardous waste treatment technologies for use in processing low-level mixed wastes at Rocky Flats

    SciTech Connect (OSTI)

    McGlochlin, S.C.; Harder, R.V.; Jensen, R.T.; Pettis, S.A.; Roggenthen, D.K.

    1990-09-18T23:59:59.000Z

    Several technologies for destroying or decontaminating hazardous wastes were evaluated (during early 1988) as potential processes for treating low-level mixed wastes destined for destruction in the Fluidized Bed Incinerator. The processes that showed promise were retained for further consideration and placed into one (or more) of three categories based on projected availability: short, intermediate, and long-term. Three potential short-term options were identified for managing low-level mixed wastes generated or stored at the Rocky Flats Plant (operated by Rockwell International in 1988). These options are: (1) Continue storing at Rocky Flats, (2) Ship to Nevada Test Site for landfill disposal, or (3) Ship to the Idaho National Engineering Laboratory for incineration in the Waste Experimental Reduction Facility. The third option is preferable because the wastes will be destroyed. Idaho National Engineering Laboratory has received interim status for processing solid and liquid low-level mixed wastes. However, low-level mixed wastes will continue to be stored at Rocky Flats until the Department of Energy approval is received to ship to the Nevada Test Site or Idaho National Engineering Laboratory. Potential intermediate and long-term processes were identified; however, these processes should be combined into complete waste treatment systems'' that may serve as alternatives to the Fluidized Bed Incinerator. Waste treatment systems will be the subject of later work. 59 refs., 2 figs.

  18. The September 1957 Rocky Flats fire: A guide to record series of the Department of Energy and its contractors

    SciTech Connect (OSTI)

    NONE

    1995-07-19T23:59:59.000Z

    The primary purpose of this guide is to help the DOE locate and make available information relating to the 1957 Rocky Flats fire. The records are arranged into six categories: administrative and general; facilities and equipment; production and materials handling; waste management; workplace and environmental monitoring; and employee occupational exposure and health. A brief explanation of each category follows. The administrative and general section pertains to the administration of individual contractor organizations and DOE divisions at Rocky Flats. It also contains records which encompass several different subject areas and therefore can not be placed in a single category. The facilities and equipment category relates to the routine construction and maintenance of plant buildings as well as the purchase and installation of equipment. The production and materials handling records relate primarily to the inventory and production of nuclear materials and weapons components. The waste management records series found under this heading relate to the storage, handling, treatment, and disposal of radioactive, chemical or mixed materials produced or used at Rocky Flats. The records consist mostly of waste sampling and shipment records. The workplace and environmental monitoring records series found in this section pertain to monitoring of the workplace. The section also includes records that document efforts to monitor the environment outside of buildings, either onsite or offsite. Records in this category consist of sampling data and environmental impact reports. The employee occupational exposure and health section pertains to documentation relating to the health and occupational exposures of employees and visitors at Rocky Flats. Records series consist generally of dosimeter data, radiation exposure records, and medical records. Many of the records contain personal data pertaining to individual employees and may therefore be Privacy Act systems and records.

  19. Rocky Flats 100th Shipments Arrives at WIPP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared0 Resource ProgramEnergy Innovation Portal Robust,RELEASE Rocky

  20. Rocky Flats Site Expands Solar Power for Treating Groundwater | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l LPROJECTS IN7 Roadmap for Bioenergy and Biobasedof Energy Rocky

  1. DOE - Office of Legacy Management -- Rocky Flats Archive

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545*. . : '* FEB 1972. :NewArchive Rocky

  2. DOE's Former Rocky Flats Weapons Production Site to Become National...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Flats nuclear weapons production site to the Department of the Interior's (DOI) U.S. Fish and Wildlife Service (FWS) for use as a National Wildlife Refuge. After more than a...

  3. A rational approach for evaluation and screening of treatment and disposal options for the solar pond sludges at Rocky Flats

    SciTech Connect (OSTI)

    Dickerson, K.S.

    1995-12-31T23:59:59.000Z

    This document consists of information about the treatment options for the sludge that is located in the evaporation ponds at the Rocky Flats Plant. The sludges are mixed low-level radioactive wastes whose composition and character were variable. Sludges similar to these are typically treated prior to ultimate disposal. Disposal of treated sludges includes both on-site and off-site options. The rational approach described in this paper is useful for technology evaluation and screening because it provides a format for developing objectives, listing alternatives, and weighing the alternatives against the objectives and against each other.

  4. Finding of no significant impact. Consolidation and interim storage of special nuclear material at Rocky Flats Environmental Technology Site

    SciTech Connect (OSTI)

    NONE

    1995-06-01T23:59:59.000Z

    The Department of Energy (DOE) has prepared an environmental assessment (EA), DOE/EA -- 1060, for the consolidation, processing, and interim storage of Category I and II special nuclear material (SNM) in Building 371 at the Rocky Flats Environmental Technology Site (hereinafter referred to as Rocky Flats or Site), Golden, Colorado. The scope of the EA included alternatives for interim storage including the no action alternative, the construction of a new facility for interim storage at Rocky Flats, and shipment to other DOE facilities for interim storage.

  5. The marriage of RCRA and CERCLA at the Rocky Flats Environmental Technology Site

    SciTech Connect (OSTI)

    Shelton, D.C.; Brooks, L.M.

    1998-11-01T23:59:59.000Z

    A key goal of the Rocky Flats Cleanup Agreement (RFCA) signed in July of 1996 was to provide a seamless marriage of the Resource Conservation and Recovery Act (RCRA) (and other media specific programs) and the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) and the implementing agencies of each. This paper examines the two years since the signing of RFCA and identifies the successes, failures, and stresses of the marriage. RFCA has provided an excellent vehicle for regulatory and substantive progress at the Department of Energy`s Rocky Flats facility. The key for a fully successful marriage is to build on the accomplishments to date and to continually improve the internal and external systems and relationships. To date, the parties can be proud of both the substantial accomplishment of substantive environmental work and the regulatory systems that have enabled the work.

  6. Rocky Flats Environmental Technology Site Ecological Monitoring Program 1995 annual report

    SciTech Connect (OSTI)

    NONE

    1995-05-31T23:59:59.000Z

    The Ecological Monitoring Program (ECMP) was established at the Rocky Flats Environmental Technology Site (Site) in September 1992. At that time, EcMP staff developed a Program Plan that was peer-reviewed by scientists from western universities before submittal to DOE RFFO in January 1993. The intent of the program is to measure several quantitative variables at different ecological scales in order to characterize the Rocky Flats ecosystem. This information is necessary to document ecological conditions at the Site in impacted and nonimpacted areas to determine if Site practices have had ecological impacts, either positive or negative. This information can be used by managers interested in future use scenarios and CERCLA activities. Others interested in impact analysis may also find the information useful. In addition, these measurements are entered into a database which will serve as a long-term information repository that will document long-term trends and potential future changes to the Site, both natural and anthropogenic.

  7. EIS-0277: Management of Certain Plutonium Residues and Scrub Alloy Stored at the Rocky Flats Environmental Technology Site

    Broader source: Energy.gov [DOE]

    This EIS evaluates the potentialalternatives and impacts associated with a proposal toprocess certain plutonium residues and all of the scrub alloy currently stored at RockyFlats. While ongoing...

  8. Implementation of Revision 19 of the TRUPACT-II Safety Analysis Report at Rocky Flats Environmental Technology Site

    SciTech Connect (OSTI)

    D'Amico, E.; O'Leary, J.; Bell, S.; Djordjevic, S.; Givens, C,; Shokes, T.; Thompson, S.; Stahl, S.

    2003-02-25T23:59:59.000Z

    The U.S. Nuclear Regulatory Commission on July 27, 2001 approved Revision 19 of the TRUPACT-II Safety Analysis Report (SAR) and the associated TRUPACT-II Authorized Methods for Payload Control (TRAMPAC). Key initiatives in Revision 19 included matrix depletion, unlimited mixing of shipping categories, a flammability assessment methodology, and an alternative methodology for the determination of flammable gas generation rates. All U.S. Department of Energy (DOE) sites shipping transuranic (TRU) waste to the Waste Isolation Pilot Plant (WIPP) were required to implement Revision 19 methodology into their characterization and waste transportation programs by May 20, 2002. An implementation process was demonstrated by the Rocky Flats Environmental Technology Site (RFETS) in Golden, Colorado. The three-part process used by RFETS included revision of the site-specific TRAMPAC, an evaluation of the contact-handled TRU waste inventory against the regulations in Revision 19, and design and development of software to facilitate future inventory analyses.

  9. Community Surveys: Low Dose Radiation. Fernald, Ohio and Rocky Flats, Colorado

    SciTech Connect (OSTI)

    C. K. Mertz; James Flynn; Donald G. MacGregor; Theresa Satterfield; Stephen M. Johnson; Seth Tuler; Thomas Webler

    2002-10-16T23:59:59.000Z

    This report is intended to present a basic description of the data from the two community surveys and to document the text of the questions; the methods used for the survey data collection; and a brief overview of the results. Completed surveys were conducted at local communities near the Rocky Flats, Colorado and the Fernald, Ohio sites; no survey was conducted for the Brookhaven, New York site. Fernald. The Fernald sample was randomly selected from 98% of all potential residential telephones in the townships of Ross, Morgan, and Crosby. The only telephone exchanges not used for the Fernald study had 4%, or fewer, of the holders of the telephone numbers actually living in either of the three target townships. Surveying started on July 24, 2001 and finished on August 30, 2001. A total of 399 completed interviews were obtained resulting in a CASRO response rate of 41.8%. The average length of an interview was 16.5 minutes. Rocky Flats. The sample was randomly selected from all potential residential telephones in Arvada and from 99% of the potential telephones in Westminster. Surveying started on August 10, 2001 and finished on September 25, 2001. A total of 401 completed interviews were obtained with a CASRO response rate of 32.5%. The average length of an interview was 15.7 minutes. Overall, respondents hold favorable views of science. They indicate an interest in developments in science and technology, feel that the world is better off because of science, and that science makes our lives healthier, easier, and more comfortable. However, respondents are divided on whether science should decide what is safe or not safe for themselves and their families. The majority of the respondents think that standards for exposure to radiation should be based on what science knows about health effects of radiation and on what is possible with today's technology. Although few respondents had visited the sites, most had heard or read something about Fernald or Rocky Flat s in the media. Impressions of the sites tend to be negative. Most respondents feel that overall their community would be better off without the site. However, when asked about the economic future of their community after cleanup and closure of the site, only 31-43% thought that it will be better, 47-56% thought their local economy will be about the same.

  10. Rocky Flats CAAS System Recalibrated, Retested, and Analyzed to Install in the Criticality Experiments Facility at the Nevada Test Site

    SciTech Connect (OSTI)

    Kim, S; Heinrichs, D; Biswas, D; Huang, S; Dulik, G; Scorby, J; Boussoufi, M; Liu, B; Wilson, R

    2009-05-27T23:59:59.000Z

    Neutron detectors and control panels transferred from the Rocky Flats Plant (RFP) were recalibrated and retested for redeployment to the CEF. Testing and calibration were successful with no failure to any equipment. Detector sensitivity was tested at a TRIGA reactor, and the response to thermal neutron flux was satisfactory. MCNP calculated minimum fission yield ({approx} 2 x 10{sup 15} fissions) was applied to determine the thermal flux at selected detector positions at the CEF. Thermal flux levels were greater than 6.39 x 10{sup 6} (n/cm{sup 2}-sec), which was about four orders of magnitude greater than the minimum alarm flux. Calculations of detector survivable distances indicate that, to be out of lethal area, a detector needs to be placed greater than 15 ft away from a maximum credible source. MCNP calculated flux/dose results were independently verified by COG. CAAS calibration and the testing confirmed that the RFP CAAS system is performing its functions as expected. New criteria for the CAAS detector placement and 12-rad zone boundaries at the CEF are established. All of the CAAS related documents and hardware have been transferred from LLNL to NSTec for installation at the CEF high bay areas.

  11. Environmental Aspects of Two Volatile Organic Compound Groundwater Treatment Designs at the Rocky Flats Site - 13135

    SciTech Connect (OSTI)

    Michalski, Casey C.; DiSalvo, Rick; Boylan, John [Stoller LMS Team, 11025 Dover Street, Suite 1000, Westminster, CO 80021 (United States)] [Stoller LMS Team, 11025 Dover Street, Suite 1000, Westminster, CO 80021 (United States)

    2013-07-01T23:59:59.000Z

    DOE's Rocky Flats Site in Colorado is a former nuclear weapons production facility that began operations in the early 1950's. Because of releases of hazardous substances to the environment, the federally owned property and adjacent offsite areas were placed on the CERCLA National Priorities List in 1989. The final remedy was selected in 2006. Engineered components of the remedy include four groundwater treatment systems that were installed before closure as CERCLA-accelerated actions. Two of the systems, the Mound Site Plume Treatment System and the East Trenches Plume Treatment System, remove low levels of volatile organic compounds using zero-valent iron media, thereby reducing the loading of volatile organic compounds in surface water resulting from the groundwater pathway. However, the zero-valent iron treatment does not reliably reduce all volatile organic compounds to consistently meet water quality goals. While adding additional zero-valent iron media capacity could improve volatile organic compound removal capability, installation of a solar powered air-stripper has proven an effective treatment optimization in further reducing volatile organic compound concentrations. A comparison of the air stripper to the alternative of adding additional zero-valent iron capacity to improve Mound Site Plume Treatment System and East Trenches Plume Treatment System treatment based on several key sustainable remediation aspects indicates the air stripper is also more 'environmentally friendly'. These key aspects include air pollutant emissions, water quality, waste management, transportation, and costs. (authors)

  12. Rocky Flats 10 year plan: over 500 structures to be demolished

    SciTech Connect (OSTI)

    Evans, B. [Kaiser-Hill L.L.C., Rocky Flats, CO (United States); Bengel, P. [Rocky Mountain Remediation Services, L.L.C., Rocky Flats, CO (United States)

    1997-03-01T23:59:59.000Z

    Rocky Flats Environmental Technology Site has prepared a Ten Year Plan (Plan) that demonstrates how the Site would achieve accelerated cleanup and rapidly reduce the risks the Site currently poses to its workers, the public, and the environment. A major element of the Plan is the decontamination and demolition of over 500 Site facilities, including all of the former nuclear production facilities, by the end of 2006. Facilities used for the storage of plutonium, treatment of low-level mixed waste, and several office building would remain until the plutonium is removed or there is no longer a need for the facility, in which case it would be demolished. While the Plan considers all aspects of the cleanup and closure, this paper focuses on the challenges posed by the removal of highly contaminated equipment and the demolition of structures. This paper describes near- term decommissioning projects as well as the long range plans and budgets. Cash flow ultimately controls schedule, and sharing of budget priorities among processing of special nuclear material, disposing of waste, and cleaning up the environment has to be juggled carefully to attain the goals of the Plan. The total cost of the Plan exceeds $5 billion, and over $1 billion will be spent on decommissioning activities. Following removal of the plutonium and the demolition of the plutonium storage and remaining Site facilities by the end of 2015, the cost to perform the long-term environmental monitoring at the Site is estimated to be $10 million per year.

  13. Nondestructive assay (NDA) of fissile material solutions in tanks at Rocky Flats Environmental Technology Site

    SciTech Connect (OSTI)

    Fleissner, J.G.; Lamb, F.W.; Maul, M.R.

    1995-07-01T23:59:59.000Z

    Nondestructive assay of holdup in solution tanks at Rocky Flats has been performed to address criticality safety concerns since 1974. Destructive analysis techniques were used for quantification of the fissile material content of the tanks. With termination of operations in 1989, including sparging and sampling of tanks, a need arose for nondestructive assay of solutions in tanks to confirm previous inventory values. Gamma ray measurement methodologies were investigated and several techniques, including Poor Man`s Densitometry were implemented. These techniques have been applied to several different types of tanks including: annular, raschig ring filled, and pencil tanks. For the annular tanks ``Poor Man`s Densitometry`` is used, with the densities of the measured solutions normalized to the value of one ``accepted`` concentration tank. Measurement uncertainties for this technique has been better than was anticipated. Measurements are also performed at several levels to attempt to detect variations in density. For the current tank draining program, solution in tanks is assayed by the NDA gamma-ray technique before draining. Measurement results were obtained for plutonium, uranium, and mixtures of U/Pu solutions for concentrations ranging from less than 0.5 g/l to 150 g/l. Tanks with expected concentrations were used to establish a relationship between concentration and count rate. ``Bootstrapping`` calibration techniques were used in some cases to obtain quantitative results.

  14. Nondestructive assay (NDA) of fissile material in gloveboxes and equipment at Rocky Flats Environmental Technology Site

    SciTech Connect (OSTI)

    Dreher, D.J.; Lamb, F.W.

    1997-10-01T23:59:59.000Z

    At Rocky Flats Environmental Technology Site (RFETS), a glovebox and equipment holdup measurement program called Untoward Areas was performed in FY92. These measurements were completed in selected areas of one building. After completing this task, measurements in two other buildings had been completed to assist in characterizing their entire inventory. This information was used as part of evaluating safeguards and security requirements. However, a large percent of the gloveboxes and equipment in process buildings have not been measured. Before FY97, holdup measurements were being performed prior to decommissioning and deactivation activities. To accelerate the quantification of holdup a list of areas suspected to have high amounts of holdup was compiled and funding was requested and recently received. Glovebox and equipment locations were selected by use of several selection criteria. The following steps were taken in the selection process: (1) attribute scan results (FY95) were examined and high scan result locations were selected, (2) knowledgeable personnel within and outside the organization were consulted, and (3) video characterization of the Building 707 chainveyor system was examined. Only a few of the high scan result areas from the attribute scan list had not been identified by the use of process knowledge. The primary driver for holdup measurements is Department of energy (DOE) Order 5633.3B, Section II-3, Physical Inventories.

  15. Solar-Powered Air Stripping at the Rocky Flats Site, Colorado - 12361

    SciTech Connect (OSTI)

    Boylan, John A. [S.M. Stoller Corporation, Rocky Flats Site, 11025 Dover Street, Suite 1000, Westminster, Colorado 80021 (United States)

    2012-07-01T23:59:59.000Z

    The U.S. Department of Energy's Rocky Flats Site (the Site), near Denver, Colorado, is a former nuclear weapons facility that was constructed beginning in 1951. With the end of the Cold War, the Site was cleaned up and closed in 2005. Four gravity-driven groundwater treatment systems were installed during cleanup, and their continued operation was incorporated into the final remedy for the Site. All utilities, including electrical power, were removed as part of this closure, so all Site electrical power needs are now met with small solar-powered systems. The Mound Site Plume Treatment System (MSPTS) was installed in 1998 as an innovative system based on zero-valent iron (ZVI). Groundwater flow from the Mound source area containing elevated concentrations of volatile organic compounds (VOCs), primarily in the tetrachloroethene (PCE)-trichloroethene (TCE) family of chlorinated solvents, is intercepted by a collection trench and routed to twin ZVI treatment cells. Later, in 2005, remediation of VOC-contaminated soils at a second up-gradient source area included adding an electron donor to the backfill to help stimulate biodegradation. This reduced concentrations of primary constituents but caused down-gradient groundwater to contain elevated levels of recalcitrant degradation byproducts, particularly cis-1,2-dichloroethene and vinyl chloride. A gravel drain installed as part of the 2005 remediation directs contaminated groundwater from this second source area to the MSPTS for treatment. This additional contaminant load, coupled with correspondingly reduced residence time within the ZVI media due to the increased flow rate, resulted in reduced treatment effectiveness. Elevated concentrations of VOCs were then detected in MSPTS effluent, as well as in surface water at the downstream performance monitoring location for the MSPTS. Subsequent consultations with the Site regulators led to the decision to add a polishing component to reduce residual VOCs in MSPTS effluent. Initially, several alternatives such as commercial air strippers and cascade aerators were evaluated; resulting cost estimates exceeded $100,000. After several simpler alternatives were considered and prototype testing was conducted, the existing effluent metering manhole was converted to house a spray-nozzle based, solar-powered air stripper, at a cost of approximately $20,000. About two-thirds of this cost was for the solar power system, which was initially designed to only provide power for 12 hours per day. Performance data are being collected and adjustments made to optimize the design, determine maintenance requirements, and establish power needs for continuous operation. Analytical data confirm the air stripper is sharply reducing concentrations of residual contaminants. (authors)

  16. Cost Estimating for Decommissioning of a Plutonium Facility--Lessons Learned From The Rocky Flats Building 771 Project

    SciTech Connect (OSTI)

    Stevens, J. L.; Titus, R.; Sanford, P. C.

    2002-02-26T23:59:59.000Z

    The Rocky Flats Closure Site is implementing an aggressive approach in an attempt to complete Site closure by 2006. The replanning effort to meet this goal required that the life-cycle decommissioning effort for the Site and for the major individual facilities be reexamined in detail. As part of the overall effort, the cost estimate for the Building 771 decommissioning project was revised to incorporate both actual cost data from a recently-completed similar project and detailed planning for all activities. This paper provides a brief overview of the replanning process and the original estimate, and then discusses the modifications to that estimate to reflect new data, methods, and planning rigor. It provides the new work breakdown structure and discusses the reasons for the final arrangement chosen. It follows with the process used to assign scope, cost, and schedule elements within the new structure, and development of the new code of accounts. Finally, it describes the project control methodology used to track the project, and provides lessons learned on cost tracking in the decommissioning environment.

  17. Solidification Tests Conducted on Transuranic Mixed Oil Waste (TRUM) at the Rocky Flats Environmental Technology Site (RFETS)

    SciTech Connect (OSTI)

    Brunkow, W. G.; Campbell, D.; Geimer, R.; Gilbreath, C.; Rivera, M.

    2002-02-25T23:59:59.000Z

    Rocky Flats Environmental Technology Site (RFETS) near Golden, Colorado is the first major nuclear weapons site within the DOE complex that has been declared a full closure site. RFETS has been given the challenge of closing the site by 2006. Key to meeting this challenge is the removal of all waste from the site followed by site restoration. Crucial to meeting this challenge is Kaiser-Hill's (RFETS Operating Contractor) ability to dispose of significant quantities of ''orphan'' wastes. Orphan wastes are those with no current disposition for treatment or disposal. Once such waste stream, generically referred to as Transuranic oils, poses a significant threat to meeting the closure schedule. Historically, this waste stream, which consist of a variety of oil contaminated with a range of organic solvents were treated by simply mixing with Environstone. This treatment method rendered a solidified waste form, but unfortunately not a TRUPACT-II transportable waste. So for the last ten years, RFETS has been accumulating these TRU oils while searching for a non-controversial treatment option.

  18. THE ROLE OF LAND USE IN ENVIRONMENTAL DECISION MAKING AT THREE DOE MEGA-CLEANUP SITES FERNALD & ROCKY FLATS & MOUND

    SciTech Connect (OSTI)

    JEWETT MA

    2011-01-14T23:59:59.000Z

    This paper explores the role that future land use decisions have played in the establishment of cost-effective cleanup objectives and the setting of environmental media cleanup levels for the three major U.S. Department of Energy (DOE) sites for which cleanup has now been successfully completed: the Rocky Flats, Mound, and Fernald Closure Sites. At each site, there are distinct consensus-building histories throughout the following four phases: (1) the facility shut-down and site investigation phase, which took place at the completion of their Cold War nuclear-material production missions; (2) the decision-making phase, whereby stakeholder and regulatory-agency consensus was achieved for the future land-use-based environmental decisions confronting the sites; (3) the remedy selection phase, whereby appropriate remedial actions were identified to achieve the future land-use-based decisions; and (4) the implementation phase, whereby the selected remedial actions for these high-profile sites were implemented and successfully closed out. At each of the three projects, there were strained relationships and distrust between the local community and the DOE as a result of site contamination and potential health effects to the workers and local residents. To engage citizens and interested stakeholder groups - particularly in the role of final land use in the decision-making process, the site management teams at each respective site developed new public-participation strategies to open stakeholder communication channels with site leadership, technical staff, and the regulatory agencies. This action proved invaluable to the success of the projects and reaching consensus on appropriate levels of cleanup. With the implementation of the cleanup remedies now complete, each of the three DOE sites have become models for future environmental-remediation projects and associated decision making.

  19. Cleanup at Rocky Flats

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New SubstationClean Communities of WesternVail Global Energy Forum Dr.2Sites

  20. Preliminary Notice of Violation, Rocky Mountain Remediation Services...

    Broader source: Energy.gov (indexed) [DOE]

    June 6, 1997 Issued to Rocky Mountain Remediation Services related to a Radioactive Material Release during Trench Remediation at the Rocky Flats Environmental Technology Site,...

  1. Evaluation of S-101 course Supervisors' orientation to occupational safety in DOE'' taught at Rocky Flats, Colorado, April 23--May 2, 1991

    SciTech Connect (OSTI)

    Vinther, R W

    1991-07-01T23:59:59.000Z

    This report summarizes trainee evaluations for the DOE Safety Training Institute's course, Supervisors Orientation to Occupational Safety in DOE,'' which was conducted twice at the Rocky Flats facility between April 23, 1991 and May 2, 1991. The first part of the report summarizes the quantitative course evaluations that trainees provided upon completion of the course and provides a transcript of the trainees written comments in Appendices A and B. The second part summarizes results from the final examination designed to measure the knowledge gained from the course. The third part of the report summarizes course modifications and recommendations for improvement. Numeric course ratings were generally positive and show that the course material and instruction was very effective. Written comments supported the positive numeric ratings. The course content and knowledge gained by the trainees exceeded most of the students expectations of the course. Results from the final examination showed that students gained appropriate knowledge from the course.

  2. Resource Conservation and Recovery Act, Part B Permit Application [for the Waste Isolation Pilot Plant (WIPP)]. Volume 2, Chapter C, Appendix C1--Chapter C, Appendix C3 (beginning), Revision 3

    SciTech Connect (OSTI)

    Not Available

    1993-03-01T23:59:59.000Z

    This volume contains appendices for the following: Rocky Flats Plant and Idaho National Engineering Laboratory waste process information; TRUPACT-II content codes (TRUCON); TRUPACT-II chemical list; chemical compatibility analysis for Rocky Flats Plant waste forms; chemical compatibility analysis for waste forms across all sites; TRU mixed waste characterization database; hazardous constituents of Rocky Flats Transuranic waste; summary of waste components in TRU waste sampling program at INEL; TRU waste sampling program; and waste analysis data.

  3. Enclosure 1 -CCP-AK-INL-004, Table 5-2 (1 page) Table 5-2. Isotopic Compositions of Rocky Flats Plutonium and Uranium

    E-Print Network [OSTI]

    Flats Plutonium and Uranium Weapons-Grade Plutonium Enriched Uranium Depleted Uranium Plutonium-238 0.01 ­ 0.05% Uranium-234 0.1 ­ 1.02% Uranium-234 0.0006% Plutonium-239 92.8 ­ 94.4% Uranium-235 90 ­ 94% Uranium-235 0.2 ­ 0.3% Plutonium-240 4.85 ­ 6.5% Uranium-236 0.4 ­ 0.5% Uranium-238 99.7 ­ 99.8% Plutonium

  4. Supplement Analysis For Disposal of Certain Rocky Flats Plutonium-Bearing Materials at the Waste Isolation Pilot Plant

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAbout »Lab (NewportSuccess StoriesNERSCSupplement Analysis

  5. REVEGETATION OF THE ROCKY FLATS SITE, COLORADO

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Careerlumens_placard-green.epsEnergy1.pdfMarket37963American |Purpose ThisRESORT

  6. Immobilization of Rocky Flats Graphite Fines Residue

    SciTech Connect (OSTI)

    Rudisill, T.S.

    1999-04-06T23:59:59.000Z

    The development of the immobilization process for graphite fines has proceeded through a series of experimental programs. The experimental procedures and results from each series of experiments are discussed in this report.

  7. Rocky Flats resumes shipments to WIPP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared0 Resource ProgramEnergy Innovation Portal Robust,RELEASE

  8. Mapco's NGL Rocky Mountain pipeline

    SciTech Connect (OSTI)

    Isaacs, S.F.

    1980-01-01T23:59:59.000Z

    The Rocky Mountain natural gas liquids (NGL) pipeline was born as a result of major producible gas finds in the Rocky Mountain area after gas deregulation. Gas discoveries in the overthurst area indicated considerable volumes of NGL would be available for transportation out of the area within the next 5 to 7 years. Mapco studied the need for a pipeline to the overthrust, but the volumes were not substantial at the time because there was little market and, consequently, little production for ethane. Since that time crude-based products for ethylene manufacture have become less competitive as a feed product on the world plastics market, and ethane demand has increased substantially. This change in the market has caused a major modification in the plans of the NGL producers and, consequently, the ethane content of the NGL stream for the overthrust area is expected to be 30% by volume at startup and is anticipated to be at 45% by 1985. These ethane volumes enhance the feasibility of the pipeline. The 1196-mile Rocky Mountain pipeline will be installed from the existing facility in W. Texas, near Seminole, to Rock Springs, Wyoming. A gathering system will connect the trunk line station to various plant locations. The pipeline development program calls for a capacity of 65,000 bpd by the end of 1981.

  9. Rocky Great Mountains Southwest Plains

    E-Print Network [OSTI]

    Rocky Great Mountains Southwest Plains Research Note RM.502 January 1991 USDA Forest Service Rocky),Carbondale, IL.2 Propellant is now solely available through Winn- Star, Inc. (WSI),Marion, IL.,2which also

  10. DOE - Office of Legacy Management -- Rocky

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are herePAOsborne CoColorado RioMill SiteRocky Flats

  11. DOE - Office of Legacy Management -- Rocky

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou areDowntownRocky Flats Site, Colorado Key Documents

  12. DOE - Office of Legacy Management -- Rocky Benefits

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou areDowntownRocky Flats Site, Colorado Key

  13. Resource Conservation and Recovery Act, Part B permit application [for the Waste Isolation Pilot Plant (WIPP)]. Volume 3, Chapter C, Appendix C3 (conclusion)--Chapter C, Appendix C9: Revision 3

    SciTech Connect (OSTI)

    Not Available

    1993-03-01T23:59:59.000Z

    This volume contains appendices for the following: results of extraction procedure (EP) toxicity data analyses; summary of headspace gas analysis in Rocky Flats Plant sampling program-FY 1988; waste drum gas generation sampling program at Rocky Flats Plant during FY 1988; TRU waste sampling program waste characterization; summary of headspace gas analyses in TRU waste sampling program; summary of volatile organic compounds analyses in TRU waste sampling program; totals analysis versus toxicity characteristic leaching procedure; Waste Isolation Pilot Plant waste characterization sampling and analysis methods; Waste Isolation Pilot Plant waste characterization analytical methods; data reduction, validation and reporting; examples of waste screening checklists; and Waste Isolation Pilot Plant generator/storage site waste screening and acceptance audit program.

  14. Independent Oversight Special Review, Rocky Flats Closure Project...

    Energy Savers [EERE]

    of the integrated work control process and line management oversight and (2) internal radiation doses received by workers in Building 771. Independent Oversight Special Review,...

  15. Photo of the Week: Rocky Flats Wildlife Refuge | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    getfeature.cfm?FeatureNumberf20130107-00">Learn more about the 2013 FIRST Robotics Competition. | Photo courtesy of Oak Ridge National Laboratory. Photo of the Week: I,...

  16. 2006 Annual Ecology Report for the Rocky Flats Site

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledo SiteTonawanda North Site Unit 24Naturita,Ecology

  17. Microsoft Word - FINAL Rocky Flats LBNL report Batch #1.docx

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledo SiteTonawanda North - t8 OLFRockyRFLMA Contactthe

  18. Rocky Flats, Colorado, Site Quarterly Report of Site Surveillance

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledo SiteTonawandaUniversity21PreparedRffi Prepared

  19. DOE's Former Rocky Flats Weapons Production Site to Become National

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomentheATLANTA, GA - U.S. Department ofTheEnergyWeaponsDepartment"It is

  20. Independent Oversight Review, Rocky Flats Environmental Technology Site -

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietipDepartment ofTheDepartment of Energy2013 |March 2000 |

  1. Independent Oversight Special Review, Rocky Flats Closure Project Site -

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietipDepartment ofTheDepartment of2012 |Department of2008 |April

  2. Final Rocky Flats Cleanup Agreement, July 19, 1996 Summary

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power SystemsResourcesFLASH2011-11-OPAMFY 2007 TotalFinal Design Review Module

  3. Final Transuranic Waste Shipment Leaves Rocky Flats | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power SystemsResourcesFLASH2011-11-OPAMFY 2007 TotalFinal Design Review ModuleDecember

  4. Water Monitoring Flume Replaced at the Rocky Flats, Colorado, Site |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment of Energy WhileTankless Electric - v1.0.xlsx MoreDepartment of

  5. Preliminary Notice of Violation , Rocky Flats Environmental Technology Site

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Careerlumens_placard-green.epsEnergy1.pdfMarket |21, 2015an overviewfeatures a worksheetthe2,-

  6. Revegetation of the Rocky Flats Site | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015Department ofRequirementsEnergyJ u lReturn onRevegetation of

  7. Rocky Flats Environmental Technology Site Archived Soil & Groundwater

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015DepartmentDepartment of Energy Energy:RobertMaster

  8. Rocky Flats Environmental Technology Site Idle Equipment, August 21, 1997

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015DepartmentDepartment of Energy Energy:RobertMaster

  9. Health Surveillance Outcomes in Former Rocky Flats Radiation Workers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun with Bigfront.jpgcommunity200cell 9HarveyWellness >Department

  10. LM Records Handling System (LMRHS01) - Rocky Flats Environmental Records

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomen OwnedofDepartment ofJared Temanson - ProjectUnlike incandescentIllnessDatabase,

  11. Microsoft Word - RockyFlatsCRO20030221.doc

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office0-72.pdfGeorgeDoesn't32 MasterAcquisiti ---- Contra See AcquFOR IMMEDIATE RELEASE

  12. Microsoft Word - RockyFlatsPropLR111406.doc

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office0-72.pdfGeorgeDoesn't32 MasterAcquisiti ---- Contra See AcquFOR IMMEDIATE RELEASE

  13. Landfill Cover Revegetation at the Rocky Flats Environmental Technology

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergy Health andofIanJennifer SomersKnownLabor StandardsSite | Department of

  14. Smooth Brome Monitoring at Rocky Flats-2005 Results | Department of

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists' Research |RegulationRenewable Energy (EERE)Smart ManufacturingDepartment

  15. DOE - Office of Legacy Management -- Rocky Flats External Resources

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545*. . : '* FEB 1972. :NewArchive

  16. DOE - Office of Legacy Management -- Rocky Flats Petition

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545*. . : '* FEB 1972. :NewArchivePetition

  17. DOE - Office of Legacy Management -- Rocky Flats Regulatory Documents

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545*. . : '* FEB 1972.

  18. Rocky Mountain Power- Net Metering

    Broader source: Energy.gov [DOE]

    Idaho does not have a statewide net-metering policy. However, each of the state's three investor-owned utilities -- Avista Utilities, Idaho Power and Rocky Mountain Power -- has a net-metering...

  19. Flat | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublicIDAPowerPlantSitingConstruction.pdfNotify98.pdf Jump to:Siting.pdfFiskdale,Five StarFlash Steam512357°,Flat

  20. Rocky Mountain Power- FinAnswer Express

    Broader source: Energy.gov [DOE]

    Rocky Mountain Power provides incentives for its commercial and industrial customers in Idaho to retrofit their existing facilities with more efficient equipment, or install energy efficient...

  1. Rocky Mountain Power- FinAnswer Express

    Broader source: Energy.gov [DOE]

    Rocky Mountain Power's FinAnswer Express Program provides extensive incentives and for lighting, HVAC, food service, agricultural, and compressed air equipment. Retrofits of facilities and upgrades...

  2. Catastrophic Evaporation of Rocky Planets

    E-Print Network [OSTI]

    Perez-Becker, Daniel

    2013-01-01T23:59:59.000Z

    Short-period exoplanets can have dayside surface temperatures surpassing 2000 K, hot enough to vaporize rock and drive a thermal wind. Small enough planets evaporate completely. We construct a radiative-hydrodynamic model of atmospheric escape from strongly irradiated, low-mass rocky planets, accounting for dust-gas energy exchange in the wind. Rocky planets with masses 2000 K are found to disintegrate entirely in 0.1 M_Earth/Gyr --- our model yields a present-day planet mass of < 0.02 M_Earth or less than about twice the mass of the Moon. Mass loss rates depend so strongly on planet mass that bodies can reside on close-in orbits for Gyrs with initial masses comparable to or less than that of Mercury, before entering a final short-lived phase of catastrophic mass loss (which KIC 12557548b has entered). Because this catastrophic stage lasts only up to a few percent of the planet's life, we estimate that for every object like KIC 12557548b, there should be 10--100 close-in quiescent progenitors with sub-da...

  3. The Meteorological Monitoring program at a former nuclear weapons plant

    SciTech Connect (OSTI)

    Maxwell, D.R.; Bowen, B.M.

    1994-02-01T23:59:59.000Z

    The purpose of the Meteorological Monitoring program at Rocky Flats Plant (RFP) is to provide meteorological information for use in assessing the transport, and diffusion, and deposition of effluent actually or potentially released into the atmosphere by plant operations. Achievement of this objective aids in protecting health and safety of the public, employees, and environment, and directly supports Emergency Response programs at RFP. Meteorological information supports the design of environmental monitoring networks for impact assessments, environmental surveillance activities, remediation activities, and emergency responses. As the mission of the plant changes from production of nuclear weapons parts to environmental cleanup and economic development, smaller releases resulting from remediation activities become more likely. These possible releases could result from airborne fugitive dust, evaporation from collection ponds, or grass fires.

  4. Wave-swept rocky shores support a surprisingly diverse assemblage of organisms that includes members of virtually

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    Wave-swept rocky shores support a surprisingly diverse assemblage of organisms that includes members of virtually every animal phylum and both algae and vascular plants. In general, wave that hydrodynamic forces can play an important role in limiting the size of wave-swept plants and animals (Denny et

  5. Rocky Mountain White Tilapia Aquaculture Low Temperature Geothermal...

    Open Energy Info (EERE)

    White Tilapia Aquaculture Low Temperature Geothermal Facility Jump to: navigation, search Name Rocky Mountain White Tilapia Aquaculture Low Temperature Geothermal Facility Facility...

  6. Is flat fair?

    SciTech Connect (OSTI)

    Bunzl, Martin

    2010-07-15T23:59:59.000Z

    Dynamic pricing holds out the promise of shifting peak demand as well as reducing overall demand. But it also raises thorny issues of fairness. All practical pricing systems involve tradeoffs between equity and efficiency. I examine the circumstances under which equity ought to be allowed to trump efficiency and whether or not this constitutes a defense of flat pricing. (author)

  7. The Theoryof Maximally Flat

    E-Print Network [OSTI]

    California at Berkeley, University of

    TRANSACTIONSON AUDIO AND ELECTROACOUSTICS, VOL. AU-20, NO. 3, AUGUST 1972 dynamic drag of the voice coil be made as flat as thedesigner'sconstraints permit. II. Theory Let the dc resistance of the voice coil, rl the mechanical re- sistance of the cone suspension, and SIthe suspension stiff- ness or spring

  8. Review of Beryllium Management Practices at Rocky Flats During Closure Operations

    Broader source: Energy.gov [DOE]

    Administrative and engineering controls, along with detailed medical and training programs and strict adherence to all characterization, sampling, and work procedures ensured that exposure to...

  9. Overview of the Second Quarter 2011 Surveillance and Maintenance Report for the LM Rocky Flats Site

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledo SiteTonawandaUniversity21 theB29.1y8947.1 of the

  10. Overview of the Third Quarter 2014 Surveillance and Maintenance Report for the LM Rocky Flats Site

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledo SiteTonawandaUniversity21 theB29.1y8947.1 of the4

  11. DOE's Rocky Flats Cleanup Site Named 2006 Project of the Year By Project

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomentheATLANTA, GA - U.S. Departmentto Develop Next-GenerationEnergy On

  12. Department of Energy Awards $300,000 Block Grant to the Rocky Flats

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomentheATLANTA, GA - U.S.Development Projects |Reserve |Education

  13. Rocky Flats Environmental Technology Site Idle Equipment, August 21, 1997 Summary

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015DepartmentDepartment of Energy

  14. Rocky Flats Environmental Technology Site Mixed Residue Consent Order, September 24, 1999

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015DepartmentDepartment of Energy

  15. Rocky Flats Environmental Technology Site Mixed Residue Consent Order, September 24, 1999 Summary

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015DepartmentDepartment of Energy9-09-24-01 State Colorado

  16. Rocky Flats Environmental Technology Site Treatment Plan Compliance Order, October 3, 1995

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015DepartmentDepartment of Energy9-09-24-01 State Colorado

  17. Rocky Flats Environmental Technology Site Treatment Plan Compliance Order, October 3, 1995 Summary

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015DepartmentDepartment of Energy9-09-24-01 State

  18. Rocky Flats Environmental Technology Site Waste Compliance Order, August 21, 1997

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015DepartmentDepartment of Energy9-09-24-01 State

  19. Rocky Flats Environmental Technology Site Waste Compliance Order, August 21, 1997 Summary

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015DepartmentDepartment of Energy9-09-24-01 State7-08-21-02

  20. DOE Certifies Rocky Flats Cleanup "Complete" | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power Systems EngineeringDepartmentSmartDepartment of

  1. Evolution of a Groundwater Treatment System-Rocky Flats, Colorado, Site |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.Program -DepartmentNovember 1, 2010December 1,Goals Past

  2. Long-Term Surveillance and Maintenance at Rocky Flats: Early Experiences

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |EnergyonSupport0.pdf5 OPAM SEMIANNUAL REPORT TOJaredKansas1Increase Profits |Servicesand

  3. Vascular Flora of the Rocky Flats Area, Jefferson County, Colorado, USA |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists' Research PetroleumDepartment of Energy Kaveh Ghaemmaghami PREPARED FOR:Department

  4. Kentish Flats Offshore Wind Farm

    E-Print Network [OSTI]

    Firestone, Jeremy

    Kentish Flats Offshore Wind Farm #12;By August 2005 the offshore wind farm at Kentish Flats plateau just outside the main Thames shipping lanes. The Kentish Flats wind farm will comprise 30 of the wind farm could be up to 90 MW. For the benefit of the environment The British Government has set

  5. Rocky Mountain Basins Produced Water Database

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Historical records for produced water data were collected from multiple sources, including Amoco, British Petroleum, Anadarko Petroleum Corporation, United States Geological Survey (USGS), Wyoming Oil and Gas Commission (WOGC), Denver Earth Resources Library (DERL), Bill Barrett Corporation, Stone Energy, and other operators. In addition, 86 new samples were collected during the summers of 2003 and 2004 from the following areas: Waltman-Cave Gulch, Pinedale, Tablerock and Wild Rose. Samples were tested for standard seven component "Stiff analyses", and strontium and oxygen isotopes. 16,035 analyses were winnowed to 8028 unique records for 3276 wells after a data screening process was completed. [Copied from the Readme document in the zipped file available at http://www.netl.doe.gov/technologies/oil-gas/Software/database.html] Save the Zipped file to your PC. When opened, it will contain four versions of the database: ACCESS, EXCEL, DBF, and CSV formats. The information consists of detailed water analyses from basins in the Rocky Mountain region.

  6. Microsoft Word - Rocky Ridge_CX Memo .docx

    Broader source: Energy.gov (indexed) [DOE]

    site. Project activities would include possible blasting andor the use of a hydraulic hammer and rock cutting tools due to the rocky ground. No more than 4700 cubic feet of spoils...

  7. Absolute calibration of optical flats

    DOE Patents [OSTI]

    Sommargren, Gary E.

    2005-04-05T23:59:59.000Z

    The invention uses the phase shifting diffraction interferometer (PSDI) to provide a true point-by-point measurement of absolute flatness over the surface of optical flats. Beams exiting the fiber optics in a PSDI have perfect spherical wavefronts. The measurement beam is reflected from the optical flat and passed through an auxiliary optic to then be combined with the reference beam on a CCD. The combined beams include phase errors due to both the optic under test and the auxiliary optic. Standard phase extraction algorithms are used to calculate this combined phase error. The optical flat is then removed from the system and the measurement fiber is moved to recombine the two beams. The newly combined beams include only the phase errors due to the auxiliary optic. When the second phase measurement is subtracted from the first phase measurement, the absolute phase error of the optical flat is obtained.

  8. Development of an ambient air sampler that satisfies RF plant monitoring requirements

    SciTech Connect (OSTI)

    Nininger, R.C.; Pauley, B.J.

    1993-01-01T23:59:59.000Z

    EG G Rocky Flats Plant (RFP) is developing a new ambient air particulate sampler to replace units that have been in service for about twenty years. The new sampler is required to operate at a flow rate approximately twice that of the existing samplers and admit particles as large as 70 micrometers aerodynamic diameter. The sampler provides two size fractions with separation at 10 micrometers. using a single stage impactor designed at RFP and carrying a Department of Energy (DOE) patent. The sampler is modular for easy servicing in the field and its operation can be checked via radiotelemetry. The sampler, designed to meet Environmental Protection Agency (EPA) requirements for PM-10 sampling, is currently being characterized in EPA's laboratories at Research Triangle Park, North Carolina.

  9. Development of an ambient air sampler that satisfies RF plant monitoring requirements

    SciTech Connect (OSTI)

    Nininger, R.C.; Pauley, B.J.

    1993-05-01T23:59:59.000Z

    EG&G Rocky Flats Plant (RFP) is developing a new ambient air particulate sampler to replace units that have been in service for about twenty years. The new sampler is required to operate at a flow rate approximately twice that of the existing samplers and admit particles as large as 70 micrometers aerodynamic diameter. The sampler provides two size fractions with separation at 10 micrometers. using a single stage impactor designed at RFP and carrying a Department of Energy (DOE) patent. The sampler is modular for easy servicing in the field and its operation can be checked via radiotelemetry. The sampler, designed to meet Environmental Protection Agency (EPA) requirements for PM-10 sampling, is currently being characterized in EPA`s laboratories at Research Triangle Park, North Carolina.

  10. Control of an industrial polymerization reactor using flatness *, P. Rouchona

    E-Print Network [OSTI]

    Control of an industrial polymerization reactor using flatness N. Petita, *, P. Rouchona , J the system under consideration is the lar- gest propylene polymerization plant in the world [15]. Originally and with precision to optimize profit. This critical issue arises in different polymerization processes, see

  11. PIA - Rocky Mountain OTC GSS | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002OpticsPeriodical:Rocky Mountain OTC GSS PIA - Rocky

  12. United States Department of Agriculture / Forest Service Rocky Mountain Research Station

    E-Print Network [OSTI]

    Flury, Markus

    United States Department of Agriculture / Forest Service Rocky Mountain Research Station Research Collins, CO: U.S. Department of Agriculture, Forest Service, Rocky Mountain Research Station. 8 p Sciences Laboratory of the Rocky Mountain Research Station (U.S. Department of Agriculture, Forest Service

  13. Half-flat Quantum Hair

    E-Print Network [OSTI]

    Hugo Garcia-Compean; Oscar Loaiza-Brito; Aldo Martinez-Merino; Roberto Santos-Silva

    2013-10-27T23:59:59.000Z

    By wrapping D3-branes over 3-cycles on a half-flat manifold we construct an effective supersymmetric black hole in the N=2 low-energy theory in four-dimensions. Specifically we find that the torsion cycles present in a half-flat compactification, corresponding to the mirror symmetric image of electric NS flux on a Calabi-Yau manifold, manifest in the half-flat black hole as quantum hair. We compute the electric and magnetic charges related to the quantum hair, and also the mass contribution to the effective black hole. We find that by wrapping a number of D3-branes equal to the order of the discrete group associated to the torsional part of the half-flat homology, the effective charge and mass terms vanishes. We compute the variation of entropy and the corresponding temperature associated with the lost of quantum hair. We also comment on the equivalence between canceling Freed-Witten anomaly and the assumption of self-duality for the 5-form field strength. Finally from a K-theoretical perspective, we compute the presence of discrete RR charge of D-branes wrapping torsional cycles in a half-flat manifold.

  14. Dr Rocky K. C. Chang Warden of Lizhi Hall

    E-Print Network [OSTI]

    Chang, Rocky Kow-Chuen

    Dr Rocky K. C. Chang Warden of Lizhi Hall Warden Office: Room 968 Intercom: 0968 Email: csrchang in women sports (swimming, field and track, badminton, volleyball, etc). I have confirmed with Ruby on energy saving came as a pleasant surprise. Our achievements are by no means limited to these external

  15. Montana State of mind Small City, the Rockies

    E-Print Network [OSTI]

    Dyer, Bill

    #12;#12;#12;#12;#12;#12;#12;Montana State of mind Small City, Big Energy Museum of the Rockies Streamline offers fare free bus service throughout the Bozeman area. Bozeman offers plenty of outdoor and intellectual and cultural activity. Bozeman offers all the amenities of a bigger city, including many chain

  16. Rocky Mountain Power- Self-Direction Credit Program

    Broader source: Energy.gov [DOE]

    Rocky Mountain Power offers a Self-Direction Credit program to its industrial and large commercial customers with annual electric usage of more than 5,000,000 kWh or a 1,000 kW peak load. Through...

  17. Rocky Mountain Power- Self-Direction Credit Program

    Broader source: Energy.gov [DOE]

    Rocky Mountain Power offers a Self-Direction Credit program to its industrial and large commercial customers with annual electric usage of more than 5 million kWh or a peak load of 1,000 kW or more...

  18. Graphene folding on flat substrates

    SciTech Connect (OSTI)

    Chen, Xiaoming; Zhao, Yadong; Ke, Changhong, E-mail: cke@binghamton.edu [Department of Mechanical Engineering, State University of New York at Binghamton, Binghamton, New York 13902 (United States); Zhang, Liuyang; Wang, Xianqiao [College of Engineering, University of Georgia, Athens, Georgia 30602 (United States)

    2014-10-28T23:59:59.000Z

    We present a combined experimental-theoretical study of graphene folding on flat substrates. The structure and deformation of the folded graphene sheet are experimentally characterized by atomic force microscopy. The local graphene folding behaviors are interpreted based on nonlinear continuum mechanics modeling and molecular dynamics simulations. Our study on self-folding of a trilayer graphene sheet reports a bending stiffness of about 6.57?eV, which is about four times the reported values for monolayer graphene. Our results reveal that an intriguing free sliding phenomenon occurs at the interlayer van der Waals interfaces during the graphene folding process. This work demonstrates that it is a plausible venue to quantify the bending stiffness of graphene based on its self-folding conformation on flat substrates. The findings reported in this work are useful to a better understanding of the mechanical properties of graphene and in the pursuit of its applications.

  19. Long-Term Risk From Actinides in the Environment: Modes of Mobility

    SciTech Connect (OSTI)

    Shawki Ibrahim, Ph.D.

    2001-05-24T23:59:59.000Z

    Laboratory soil column experiments were conducted to investigate the migration of plutonium in soils from the Waste Isolation Pilot Plant (WIPP) and the Rocky Flats Environmental Technology Site.

  20. The United States Plutonium Balance, 1944-2009 | National Nuclear...

    National Nuclear Security Administration (NNSA)

    since 1994 include: the completion of clean-up activities at the Rocky Flats Plant in Colorado in 2005; material consolidation and disposition activities; 2007 declaration of an...

  1. Phase one contamination migration testing of the double-lid bagless posting system

    SciTech Connect (OSTI)

    Smith, J.A.

    1994-09-01T23:59:59.000Z

    This document describes leak rate tests on a double lid radioactive waste storage container, developed during the Microwave Solidification Project at Rocky Flats Plant.

  2. All conformally flat pure radiation metrics

    E-Print Network [OSTI]

    S. Brian Edgar; Garry Ludwig

    1996-12-20T23:59:59.000Z

    The complete class of conformally flat, pure radiation metrics is given, generalising the metric recently given by Wils.

  3. Rocky Flats CAAS System Recalibrated, Retested, and Analyzed to Install in the Criticality Experiments Facility at the Nevada Test Site

    E-Print Network [OSTI]

    2009-01-01T23:59:59.000Z

    sponsorship of the DOE Nuclear Criticality Safety Program.Improved Criticality Alarm System, Proceedings of Nuclear

  4. Rocky Flats CAAS System Recalibrated, Retested, and Analyzed to Install in the Criticality Experiments Facility at the Nevada Test Site

    E-Print Network [OSTI]

    2009-01-01T23:59:59.000Z

    transferred from LLNL to NSTec for installation at the CEFSecurity Technologies (NSTec) is a great example of thetransferred from LLNL to NSTec for installation at the CEF

  5. Rocky Flats CAAS System Recalibrated, Retested, and Analyzed to Install in the Criticality Experiments Facility at the Nevada Test Site

    E-Print Network [OSTI]

    2009-01-01T23:59:59.000Z

    air, the following conversion factor (C) was used for the Puneutron). The same conversion factor, 1.411 10 -9 , wasprompt gamma ray conversion factor, the conversion factor

  6. Rocky Flats, Colorado, Site Quarterly Report of Site Surveillance and Maintenance Activities Third Quarter Calendar Year 2013

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledo SiteTonawandaUniversity21PreparedRffi Prepared3

  7. Rocky Flats, Colorado, Site Quarterly Report of Site Surveillance and Maintenance Activities Third Quarter Calendar Year 2013

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledo SiteTonawandaUniversity21PreparedRffi

  8. Report on "Audit of the Contractor Incentive Programs at the Rocky Flats Environmental Technology Site, IG-0411

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energy fromComments onReply Comments of Southern CompanyResearchManagement |

  9. EA-1120: Solid Residues Treatment, Repackaging and Storage at the Rocky Flats Environmental Technology Site, Golden, Colorado

    Broader source: Energy.gov [DOE]

    This EA evaluates the environmental impacts of the proposal to stabilize, if necessary, and/or repackage the residues for safe interim storage at the Site while awaiting the completion and opening...

  10. E-Print Network 3.0 - annual rocky mountain Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    system occurs on dry... , and extends out onto breaks in the Great Plains. In Colorado, the southern Rocky ... Source: Colorado State University, Center for Environmental...

  11. Windy Flats | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place:ReferenceEdit JumpWill County,Windspire EnergyFlats Jump to:

  12. Western Area Power Administration Rocky Mountain Region (Western)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun Deng Associate ResearchWestern AreaRocky

  13. DOE - Office of Legacy Management -- Rocky Mountain Research Laboratories -

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are herePAOsborne CoColorado RioMill SiteRocky

  14. Flat-Plate Photovoltaic Module Basics

    Broader source: Energy.gov [DOE]

    Flat-plate photovoltaic (PV) modules are made of several components, including the front surface materials, encapsulant, rear surface, and frame.

  15. Turkey Flat Site Effects Test Area The Turkey-Flat strong motion "blind"

    E-Print Network [OSTI]

    Oprsal, Ivo

    Turkey Flat Site Effects Test Area B B' A A' C C' The Turkey-Flat strong motion "blind" prediction experiment "Blind" Test Approach Conduct high quality field and laboratory tests to characterize Geological Survey Turkey Flat, USA Site Effects Test Area: "Blind" Test of Predicted Ground Response

  16. Flat Directions and Baryogenesis in Supersymmetric Theories

    E-Print Network [OSTI]

    Lisa Randall

    1995-07-08T23:59:59.000Z

    Flat directions are a generic feature of supersymmetric theories. They are of cosmological interest because they can lead to coherent production of scalars. In the early universe such flat directions could be dangerous due to the potentially large energy density and the late decay of the associated scalars when they have only $1/M_p$ couplings (Polonyi problem). On the other hand, flat directions among the standard model fields can carry baryon number and lead to a possible mechanism for baryogenesis (Affleck Dine baryogenesis). When considering the cosmological consequences of the flat directions, it is important to take into account the soft potential with curvature of order the Hubble constant due to supersymmetry breaking in the early universe. In this talk, we discuss flat directions, their potential cosmological implications focusing on Affleck-Dine baryogenesis, and how the standard picture of their evolution must be modified in the presence of the large supersymmetry breaking in the early universe.

  17. Atmospheric heat redistribution and collapse on tidally locked rocky planets

    E-Print Network [OSTI]

    Wordsworth, Robin

    2014-01-01T23:59:59.000Z

    Atmospheric collapse is likely to be of fundamental importance to tidally locked rocky exoplanets but remains understudied. Here, general results on the heat transport and stability of tidally locked terrestrial-type atmospheres are reported. First, the problem is modeled with an idealized 3D general circulation model (GCM) with gray gas radiative transfer. It is shown that over a wide range of parameters the atmospheric boundary layer, rather than the large-scale circulation, is the key to understanding the planetary energy balance. Through a scaling analysis of the interhemispheric energy transfer, theoretical expressions for the day-night temperature difference and surface wind speed are created that reproduce the GCM results without tuning. Next, the GCM is used with correlated-k radiative transfer to study heat transport for two real gases (CO2 and CO). For CO2, empirical formulae for the collapse pressure as a function of planetary mass and stellar flux are produced, and critical pressures for atmospher...

  18. On glacier retreat and drought cycles in the Rocky Mountains of Montana and Canada

    E-Print Network [OSTI]

    Berger, Wolfgang H

    2009-01-01T23:59:59.000Z

    North America Glaciers of Canada Glaciers of the CanadianRocky Mountains of Montana and Canada W. H. Berger * ScrippsMontana and southwestern Canada. The presence of tidal lines

  19. Reduced attachment strength of rocky shore gastropods caused by trematode infection

    E-Print Network [OSTI]

    Poulin, Robert

    ) leave the snail to seek the next host in the life cycle (Galaktionov and Dobrovolskij, 2003). Trematodes. To adhere to the substrate, most rocky shore gastro- pods, such as limpets and periwinkles, use

  20. Flat panel ferroelectric electron emission display system

    DOE Patents [OSTI]

    Sampayan, Stephen E. (Manteca, CA); Orvis, William J. (Livermore, CA); Caporaso, George J. (Livermore, CA); Wieskamp, Ted F. (Livermore, CA)

    1996-01-01T23:59:59.000Z

    A device which can produce a bright, raster scanned or non-raster scanned image from a flat panel. Unlike many flat panel technologies, this device does not require ambient light or auxiliary illumination for viewing the image. Rather, this device relies on electrons emitted from a ferroelectric emitter impinging on a phosphor. This device takes advantage of a new electron emitter technology which emits electrons with significant kinetic energy and beam current density.

  1. No-migration variance petition. Appendix B, Attachments E--Q: Volume 4, Revision 1

    SciTech Connect (OSTI)

    Not Available

    1990-03-01T23:59:59.000Z

    Volume IV contains the following attachments: TRU mixed waste characterization database; hazardous constituents of Rocky flats transuranic waste; summary of waste components in TRU waste sampling program at INEL; total volatile organic compounds (VOC) analyses at Rocky Flats Plant; total metals analyses from Rocky Flats Plant; results of toxicity characteristic leaching procedure (TCLP) analyses; results of extraction procedure (EP) toxicity data analyses; summary of headspace gas analysis in Rocky Flats Plant (RFP) -- sampling program FY 1988; waste drum gas generation--sampling program at Rocky Flats Plant during FY 1988; TRU waste sampling program -- volume one; TRU waste sampling program -- volume two; and summary of headspace gas analyses in TRU waste sampling program; summary of volatile organic compounds (V0C) -- analyses in TRU waste sampling program.

  2. Project Fever - Fostering Electric Vehicle Expansion in the Rockies

    SciTech Connect (OSTI)

    Swalnick, Natalia

    2013-06-30T23:59:59.000Z

    Project FEVER (Fostering Electric Vehicle Expansion in the Rockies) is a part of the Clean Cities Community Readiness and Planning for Plug-in Electric Vehicles and Charging Infrastructure Funding Opportunity funded by the U.S. Department of Energy (DOE) for the state of Colorado. Tasks undertaken in this project include: Electric Vehicle Grid Impact Assessment; Assessment of Electrical Permitting and Inspection for EV/EVSE (electric vehicle/electric vehicle supply equipment); Assessment of Local Ordinances Pertaining to Installation of Publicly Available EVSE;Assessment of Building Codes for EVSE; EV Demand and Energy/Air Quality Impacts Assessment; State and Local Policy Assessment; EV Grid Impact Minimization Efforts; Unification and Streamlining of Electrical Permitting and Inspection for EV/EVSE; Development of BMP for Local EVSE Ordinances; Development of BMP for Building Codes Pertaining to EVSE; Development of Colorado-Specific Assessment for EV/EVSE Energy/Air Quality Impacts; Development of State and Local Policy Best Practices; Create Final EV/EVSE Readiness Plan; Develop Project Marketing and Communications Elements; Plan and Schedule In-person Education and Outreach Opportunities.

  3. Flat Spacetime Vacuum in Loop Quantum Gravity

    E-Print Network [OSTI]

    A. Mikovic

    2004-04-06T23:59:59.000Z

    We construct a state in the loop quantum gravity theory with zero cosmological constant, which should correspond to the flat spacetime vacuum solution. This is done by defining the loop transform coefficients of a flat connection wavefunction in the holomorphic representation which satisfies all the constraints of quantum General Relativity and it is peaked around the flat space triads. The loop transform coefficients are defined as spin foam state sum invariants of the spin networks embedded in the spatial manifold for the SU(2) quantum group. We also obtain an expression for the vacuum wavefunction in the triad represntation, by defining the corresponding spin networks functional integrals as SU(2) quantum group state sums.

  4. Nitrogen and Sulfur in Rocky Mountain National Park

    E-Print Network [OSTI]

    Fischer, Emily V.

    a variety of air pollution sources, including automobiles, power plants, industry, agriculture, and fires in nitrogen deposition in mountain ecosys- tems. Power plants and other point sources 26% Motor vehicles 25 threats to aquatic and terrestrial resources in the park. Lakes and streams have low concentrations

  5. Neal Lane: Science in a Flat World

    SciTech Connect (OSTI)

    Neal Lane

    2006-09-12T23:59:59.000Z

    Lane discusses the changes that have taken place in the world since World War II that have made it "flatter," referring to Thomas L. Friedman's book, The World is Flat. Friedman's main premise is that inexpensive telecommunications is bringing about unhampered international competition, the demise of economic stability, and a trend toward outsourcing services, such as computer programming, engineering and science research.

  6. Actin Polymerization: Forcing Flat Faces Forward

    E-Print Network [OSTI]

    van Oudenaarden, Alexander

    Actin Polymerization: Forcing Flat Faces Forward Arpita Upadhyaya1 and Alexander van Oudenaarden2 Actin polymerization has been shown to be sufficient to propel curved objects, for example beads polymerization forms the basis of numerous forms of cell motility. Actin is thought to polymerize at the leading

  7. Neal Lane: Science in a Flat World

    ScienceCinema (OSTI)

    Neal Lane

    2010-09-01T23:59:59.000Z

    Lane discusses the changes that have taken place in the world since World War II that have made it "flatter," referring to Thomas L. Friedman's book, The World is Flat. Friedman's main premise is that inexpensive telecommunications is bringing about unhampered international competition, the demise of economic stability, and a trend toward outsourcing services, such as computer programming, engineering and science research.

  8. Flat Space Limit of (Higher-Spin) Cardy Formula

    E-Print Network [OSTI]

    Max Riegler

    2014-11-14T23:59:59.000Z

    In this note I derive the flat space limit of the modified Cardy formula associated with inner horizons and show that it reproduces the correct Galilean conformal field theory counting of flat space cosmology microstates. l also determine the entropy of flat space cosmologies in flat space chiral gravity in this way. In addition, I derive a Cardy-like expression for flat space cosmologies with spin-3 charges and thus give a prediction for the corresponding Galilean conformal field theory counting of flat space cosmology microstates with spin-3 charges.

  9. Characterization of Most Promising Sequestration Formations in the Rocky Mountain Region (RMCCS)

    SciTech Connect (OSTI)

    McPherson, Brian; Matthews, Vince

    2013-09-30T23:59:59.000Z

    The primary objective of the Characterization of Most Promising Carbon Capture and Sequestration Formations in the Central Rocky Mountain Region project, or RMCCS project, is to characterize the storage potential of the most promising geologic sequestration formations within the southwestern U.S. and the Central Rocky Mountain region in particular. The approach included an analysis of geologic sequestration formations under the Craig Power Station in northwestern Colorado, and application or extrapolation of those local-scale results to the broader region. A ten-step protocol for geologic carbon storage site characterization was a primary outcome of this project.

  10. Radiation content of Conformally flat initial data

    E-Print Network [OSTI]

    C. O. Lousto; R. H. Price

    2004-01-11T23:59:59.000Z

    We study the radiation of energy and linear momentum emitted to infinity by the headon collision of binary black holes, starting from rest at a finite initial separation, in the extreme mass ratio limit. For these configurations we identify the radiation produced by the initially conformally flat choice of the three geometry. This identification suggests that the radiated energy and momentum of headon collisions will not be dominated by the details of the initial data for evolution of holes from initial proper separations $L_0\\geq7M$. For non-headon orbits, where the amount of radiation is orders of magnitude larger, the conformally flat initial data may provide a relative even better approximation.

  11. Whiskey Flats Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey Flats Geothermal Area Jump to: navigation, search

  12. Remote geologic structural analysis of Yucca Flat

    SciTech Connect (OSTI)

    Foley, M.G.; Heasler, P.G.; Hoover, K.A. (Pacific Northwest Lab., Richland, WA (United States)); Rynes, N.J. (Northern Illinois Univ., De Kalb, IL (United States)); Thiessen, R.L.; Alfaro, J.L. (Washington State Univ., Pullman, WA (United States))

    1991-12-01T23:59:59.000Z

    The Remote Geologic Analysis (RGA) system was developed by Pacific Northwest Laboratory (PNL) to identify crustal structures that may affect seismic wave propagation from nuclear tests. Using automated methods, the RGA system identifies all valleys in a digital elevation model (DEM), fits three-dimensional vectors to valley bottoms, and catalogs all potential fracture or fault planes defined by coplanar pairs of valley vectors. The system generates a cluster hierarchy of planar features having greater-than-random density that may represent areas of anomalous topography manifesting structural control of erosional drainage development. Because RGA uses computer methods to identify zones of hypothesized control of topography, ground truth using a well-characterized test site was critical in our evaluation of RGA's characterization of inaccessible test sites for seismic verification studies. Therefore, we applied RGA to a study area centered on Yucca Flat at the Nevada Test Site (NTS) and compared our results with both mapped geology and geologic structures and with seismic yield-magnitude models. This is the final report of PNL's RGA development project for peer review within the US Department of Energy Office of Arms Control (OAC) seismic-verification community. In this report, we discuss the Yucca Flat study area, the analytical basis of the RGA system and its application to Yucca Flat, the results of the analysis, and the relation of the analytical results to known topography, geology, and geologic structures. 41 refs., 39 figs., 2 tabs.

  13. Remote geologic structural analysis of Yucca Flat

    SciTech Connect (OSTI)

    Foley, M.G.; Heasler, P.G.; Hoover, K.A. [Pacific Northwest Lab., Richland, WA (United States); Rynes, N.J. [Northern Illinois Univ., De Kalb, IL (United States); Thiessen, R.L.; Alfaro, J.L. [Washington State Univ., Pullman, WA (United States)

    1991-12-01T23:59:59.000Z

    The Remote Geologic Analysis (RGA) system was developed by Pacific Northwest Laboratory (PNL) to identify crustal structures that may affect seismic wave propagation from nuclear tests. Using automated methods, the RGA system identifies all valleys in a digital elevation model (DEM), fits three-dimensional vectors to valley bottoms, and catalogs all potential fracture or fault planes defined by coplanar pairs of valley vectors. The system generates a cluster hierarchy of planar features having greater-than-random density that may represent areas of anomalous topography manifesting structural control of erosional drainage development. Because RGA uses computer methods to identify zones of hypothesized control of topography, ground truth using a well-characterized test site was critical in our evaluation of RGA`s characterization of inaccessible test sites for seismic verification studies. Therefore, we applied RGA to a study area centered on Yucca Flat at the Nevada Test Site (NTS) and compared our results with both mapped geology and geologic structures and with seismic yield-magnitude models. This is the final report of PNL`s RGA development project for peer review within the US Department of Energy Office of Arms Control (OAC) seismic-verification community. In this report, we discuss the Yucca Flat study area, the analytical basis of the RGA system and its application to Yucca Flat, the results of the analysis, and the relation of the analytical results to known topography, geology, and geologic structures. 41 refs., 39 figs., 2 tabs.

  14. Geothermal: Sponsored by OSTI -- Telephone Flat Geothermal Development...

    Office of Scientific and Technical Information (OSTI)

    Telephone Flat Geothermal Development Project Environmental Impact Statement Environmental Impact Report. Final: Comments and Responses to Comments Geothermal Technologies Legacy...

  15. Altitudinal Gradients of Stable Isotopes in Lee-Slope Precipitation in the Canadian Rocky Mountains

    E-Print Network [OSTI]

    , this isotopic fractionation and distillation can be driven by vapor transport to higher altitudes, higher of the Canadian Rockies at the Continental Divide and receives precipitation from both westerly (Pacific) air altitudes. Surface and upper-air meteorological data were analyzed to classify the type of weather systems

  16. SIZE COMPOSITION AND GROWTH OF YOUNG ROCK CRAB, CANCER IRRORATUS, ON A ROCKY BEACH IN MAINE!

    E-Print Network [OSTI]

    . Because rock crab is a valuable commercial species as well as an important food source of lobsters (EnnisSIZE COMPOSITION AND GROWTH OF YOUNG ROCK CRAB, CANCER IRRORATUS, ON A ROCKY BEACH IN MAINE! JAY S KROUSE' ABSTRACT Monthly hand collections of small rock crab, Cancer irrorallls, were made from

  17. DOWNSTREAM EFFECTS OF DIVERSION DAMS ON SEDIMENT AND HYDRAULIC CONDITIONS OF ROCKY MOUNTAIN STREAMS

    E-Print Network [OSTI]

    Poff, N. LeRoy

    DOWNSTREAM EFFECTS OF DIVERSION DAMS ON SEDIMENT AND HYDRAULIC CONDITIONS OF ROCKY MOUNTAIN STREAMS of downstream channels and lead to accumulation of fine sediments and habitat degradation. To investigate, we-sediment measures, and an intensive sampling scheme, this study found that channels downstream of diversions

  18. WATER QUALITY CHANGES AS A RESULT OF COALBED METHANE DEVELOPMENT IN A ROCKY MOUNTAIN WATERSHED1

    E-Print Network [OSTI]

    McClain, Michael

    WATER QUALITY CHANGES AS A RESULT OF COALBED METHANE DEVELOPMENT IN A ROCKY MOUNTAIN WATERSHED1 Xixi Wang, Assefa M. Melesse, Michael E. McClain, and Wanhong Yang2 ABSTRACT: Coalbed methane (CBM the Powder River. (KEY TERMS: coalbed methane, produced water; Montana; natural gas; pattern analysis

  19. Introduction The Colorado potato beetle became a pest when settlers brought potatoes into the Rocky

    E-Print Network [OSTI]

    New Hampshire, University of

    16 Introduction The Colorado potato beetle became a pest when settlers brought potatoes into the Rocky Mountain area, the native habitat of this beetle. The beetle preferred the potato to its host weed, and now is a serious pest throughout the U.S. and Eastern Canada. The Colorado potato beetle feeds

  20. Eocene and Oligocene Floras and Vegetation of the Rocky Mountains Scott L. Wing

    E-Print Network [OSTI]

    Lyons, S. Kathleen

    copy of any part of a JSTOR transmission must contain the same copyright notice that appears on the screen or printed page of such transmission. The JSTOR Archive is a trusted digital repository providing of the state of Wy- oming (106,000 kmz), and their total outcrop The Rocky Mountain region is geologicallydi

  1. The Role of Biodiversity for the Functioning of Rocky Reef Communities

    E-Print Network [OSTI]

    Brody, James P.

    Chapter 26 The Role of Biodiversity for the Functioning of Rocky Reef Communities Lars Gamfeldt and provide suggestions for future research into the functional roles of marine biodiversity in temperate 31 #12;362 L. Gamfeldt and M.E.S. Bracken 26.2 How and Why Biodiversity Can Be Linked to Ecosystem

  2. NATIVE MYCORRHIZAL FUNGI WITH ASPEN ON SMELTER-IMPACTED SITES IN THE NORTHERN ROCKY MOUNTAINS

    E-Print Network [OSTI]

    Cripps, Cathy

    by extensive aspen stands on the East Ridge of Butte, MT (inactive copper smelter), adjacent to the smelter stack at Anaconda, MT (inactive copper smelter), at the (removed) lead smelter at Kellogg, ID, and alongNATIVE MYCORRHIZAL FUNGI WITH ASPEN ON SMELTER- IMPACTED SITES IN THE NORTHERN ROCKY MOUNTAINS

  3. Converting Nested Algebra Expressions into Flat Algebra Expressions

    E-Print Network [OSTI]

    Van Gucht, Dirk

    Converting Nested Algebra Expressions into Flat Algebra Expressions JAN PAREDAENS University of Antwerp and DIRK VAN GUCHT Indiana University Nested relations generalize ordinary flat relations by allowing tuple values to be either atomic or set valued. The nested algebra is a generalization of the flat

  4. Introduction Flattening the Earth Continuation procedure Flat Earth Numerical simulations Continuation from a flat to a round Earth model

    E-Print Network [OSTI]

    Boyer, Edmond

    Introduction Flattening the Earth Continuation procedure Flat Earth Numerical simulations Continuation from a flat to a round Earth model in the coplanar orbit transfer problem M. Cerf1, T. Haberkorn, SADCO 2011, March 2nd M. Cerf, T. Haberkorn, E. Tr´elat Continuation from a flat to a round Earth model

  5. Flat space (higher spin) gravity with chemical potentials

    E-Print Network [OSTI]

    Michael Gary; Daniel Grumiller; Max Riegler; Jan Rosseel

    2014-11-24T23:59:59.000Z

    We introduce flat space spin-3 gravity in the presence of chemical potentials and discuss some applications to flat space cosmology solutions, their entropy, free energy and flat space orbifold singularity resolution. Our results include flat space Einstein gravity with chemical potentials as special case. We discover novel types of phase transitions between flat space cosmologies with spin-3 hair and show that the branch that continuously connects to spin-2 gravity becomes thermodynamically unstable for sufficiently large temperature or spin-3 chemical potential.

  6. Energy Conservation in Flat FRW Cosmology

    E-Print Network [OSTI]

    Steven Maxson

    2009-01-07T23:59:59.000Z

    The consequence of energy conservation in the flat Friedmannn-Robertson-Walker (FRW) cosmology is a strictly positive accelerating expansion. A mechanism is proposed for this expansion due to the effect of the attractive (negative) gravitational potential of matter as it is being included within the expanding horizon, and the offsetting work of metric expansion, which takes place at sub-luminal speed. In our semi-classical treatment, we deal with a quintic as the equation for the scale parameter. Implications for modeling the earliest parts of the primordial expansion are discussed.

  7. Geometrical Wake of a Smooth Flat Collimator

    SciTech Connect (OSTI)

    Stupakov, G.V.; /SLAC

    2011-09-09T23:59:59.000Z

    A transverse geometrical wake generated by a beam passing through a smooth flat collimator with a gradually varying gap between the upper and lower walls is considered. Based on generalization of the approach recently developed for a smooth circular taper we reduce the electromagnetic problem of the impedance calculation to the solution of two much simpler static problems - a magnetostatic and an electrostatic ones. The solution shows that in the limit of not very large frequencies, the impedance increases with the ratio h/d where h is the width and d is the distance between the collimating jaws. Numerical results are presented for the NLC Post Linac collimator.

  8. Caithness Shepherds Flat | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power Systems EngineeringDepartment of4 Federal6CleanCaithness Shepherds Flat Caithness Shepherds

  9. Flat Ridge 2 | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision has beenFfe2fb55-352f-473b-a2dd-50ae8b27f0a6Theoretical vs Actual DataNext 25 YearsFlat Ridge 2 Facility

  10. Flat Ridge Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision has beenFfe2fb55-352f-473b-a2dd-50ae8b27f0a6Theoretical vs Actual DataNext 25 YearsFlat Ridge 2

  11. Flat Water Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision has beenFfe2fb55-352f-473b-a2dd-50ae8b27f0a6Theoretical vs Actual DataNext 25 YearsFlat Ridge 2Wind Farm

  12. U.S. Army Engineer Waterways Experiment Station (WES) support to Department of Energy Rocky Flats Facility (DOE RFO) saltcrete processing. Progress report, April 15--September 30, 1995

    SciTech Connect (OSTI)

    NONE

    1996-04-29T23:59:59.000Z

    This report summarizes work authorized for technical and scientific support to waste cementation and saltcrete processing operations. During this report period, the remaining tasks described in the agreement were completed and the project was closed. Accomplishments are summarized. The bulk of this report is a paper entitled ``Salt related expansion reactions in portland-cement-based waste forms.``

  13. Long-Term Surveillance and Maintenance at the Rocky Flats Site: Lessons Learned Based on the First Years Real Experiences From the Field

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office0-72.pdfGeorgeDoesn't Happen toLeveragingLindseyLong-Term Storage ofSites |Sites |08

  14. Ghost condensate model of flat rotation curves

    E-Print Network [OSTI]

    V. V. Kiselev

    2005-07-29T23:59:59.000Z

    An effective action of ghost condensate with higher derivatives creates a source of gravity and mimics a dark matter in spiral galaxies. We present a spherically symmetric static solution of Einstein--Hilbert equations with the ghost condensate at large distances, where flat rotation curves are reproduced in leading order over small ratio of two energy scales characterizing constant temporal and spatial derivatives of ghost field: $\\mu_*^2$ and $\\mu_\\star^2$, respectively, with a hierarchy $\\mu_\\star\\ll \\mu_*$. We assume that a mechanism of hierarchy is provided by a global monopole in the center of galaxy. An estimate based on the solution and observed velocities of rotations in the asymptotic region of flatness, gives $\\mu_*\\sim 10^{19}$ GeV and the monopole scale in a GUT range $\\mu_\\star\\sim 10^{16}$ GeV, while a velocity of rotation $v_0$ is determined by the ratio: $ \\sqrt{2} v_0^2= \\mu_\\star^2/\\mu_*^2$. A critical acceleration is introduced and naturally evaluated of the order of Hubble rate, that represents the Milgrom's acceleration.

  15. Appendix 15 Red and Blue-Listed Vertebrate and Vascular Plant Species The

    E-Print Network [OSTI]

    Appendix 15 Red and Blue-Listed Vertebrate and Vascular Plant Species The report that follows lists red- and blue-listed species occurring in the Cranbrook Forest District and in the Southern Rocky risk' as either vulnerable in BC (Blue-listed), or endangered or threatened (Red-listed). The species

  16. Rocky Mountain area petroleum product availability with reduced PADD IV refining capacity

    SciTech Connect (OSTI)

    Hadder, G.R.; Chin, S.M.

    1994-02-01T23:59:59.000Z

    Studies of Rocky Mountain area petroleum product availability with reduced refining capacity in Petroleum Administration for Defense IV (PADD IV, part of the Rocky Mountain area) have been performed with the Oak Ridge National Laboratory Refinery Yield Model, a linear program which has been updated to blend gasolines to satisfy constraints on emissions of nitrogen oxides and winter toxic air pollutants. The studies do not predict refinery closures in PADD IV. Rather, the reduced refining capacities provide an analytical framework for probing the flexibility of petroleum refining and distribution for winter demand conditions in the year 2000. Industry analysts have estimated that, for worst case scenarios, 20 to 35 percent of PADD IV refining capacity could be shut-down as a result of clean air and energy tax legislation. Given these industry projections, the study scenarios provide the following conclusions: The Rocky Mountain area petroleum system would have the capability to satisfy winter product demand with PADD IV refinery capacity shut-downs in the middle of the range of industry projections, but not in the high end of the range of projections. PADD IV crude oil production can be maintained by re-routing crude released from PADD IV refinery demands to satisfy increased crude oil demands in PADDs II (Midwest), III (Gulf Coast), and Washington. Clean Air Act product quality regulations generally do not increase the difficulty of satisfying emissions reduction constraints in the scenarios.

  17. FIA-12-0007- In the Matter of Jon Lipsky

    Broader source: Energy.gov [DOE]

    Jon Lipsky filed an Appeal regarding a request he filed under the Freedom of Information Act for a copy of the 1989 Multispectral Scanner Survey (MSS) of the former Rocky Flats Nuclear Weapons Plant.

  18. INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO.

    E-Print Network [OSTI]

    Birmingham, University of

    INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO. Staff on the Vale Village try to ensure and cleaned to a high standard. Please make sure that you complete this inventory and note down anything which seat x 1 Toilet roll holder x 1 INVENTORY FOR SHACKLETON FLAT NO: BLOCK NO: ROOM NO: NAME: TELEPHONE

  19. INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO.

    E-Print Network [OSTI]

    Birmingham, University of

    INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO. Staff on the Vale Village try to ensure and cleaned to a high standard. Please make sure that you complete this inventory and note down anything which Toilet seat x 1 Toilet roll holder x 1 INVENTORY FOR MASON FLAT NO: BLOCK NO: ROOM NO: NAME: TELEPHONE

  20. INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO.

    E-Print Network [OSTI]

    Birmingham, University of

    INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO. Staff on the Vale Village try to ensure and cleaned to a high standard. Please make sure that you complete this inventory and note down anything which holder x 1 INVENTORY FOR TENNIS COURT BLOCK NO: FLAT NO: ROOM NO: NAME: TELEPHONE EXT. NO: #12;How

  1. INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO.

    E-Print Network [OSTI]

    Birmingham, University of

    INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO. Staff on the Vale Village try to ensure and cleaned to a high standard. Please make sure that you complete this inventory and note down anything which Toilet seat x 1 Toilet roll holder x 1 INVENTORY FOR ELGAR COURT FLAT NO: BLOCK NO: ROOM NO: NAME

  2. INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO.

    E-Print Network [OSTI]

    Birmingham, University of

    INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO. Staff on the Vale Village try to ensure and cleaned to a high standard. Please make sure that you complete this inventory and note down anything which rail x 1 INVENTORY FOR MAPLE BANK FLAT NO: BLOCK NO: ROOM NO: NAME: TELEPHONE EXT. NO: #12;How

  3. EIS-0298: Telephone Flat Geothermal Development Project

    Broader source: Energy.gov [DOE]

    This EIS is for a Plan of Operation (POO) for Development and Production; and for a POO for Utilization and Disposal for a proposed geothermal development project, including: a power plant, geothermal production and injection wellfield, ancillary facilities, and transmission line on the Modoc National Forest in Siskiyou and Modoc Counties, California.

  4. Design of a photovoltaic central power station: flat-plate array

    SciTech Connect (OSTI)

    Not Available

    1984-02-01T23:59:59.000Z

    A design for a photovoltaic central power station using fixed flat-panel arrays has been developed. The 100 MW plant is assumed to be located adjacent to the Saguaro Power Station of Arizona Public Service. The design assumes high-efficiency photovoltaic modules using dendritic web cells. The modules are arranged in 5 MW subfields, each with its own power conditioning unit. The photovoltaic output is connected to the existing 115 kV utility switchyard. The site specific design allows detailed cost estimates for engineering, site preparation, and installation. Collector and power conditioning costs have been treated parametrically.

  5. Power Plant Power Plant

    E-Print Network [OSTI]

    Tingley, Joseph V.

    Basin Center for Geothermal Energy at University of Nevada, Reno (UNR) 2 Nevada Geodetic LaboratoryStillwater Power Plant Wabuska Power Plant Casa Diablo Power Plant Glass Mountain Geothermal Area Lassen Geothermal Area Coso Hot Springs Power Plants Lake City Geothermal Area Thermo Geothermal Area

  6. A quantum kinematics for asymptotically flat spacetimes

    E-Print Network [OSTI]

    Miguel Campiglia; Madhavan Varadarajan

    2014-12-17T23:59:59.000Z

    We construct a quantum kinematics for asymptotically flat spacetimes based on the Koslowski-Sahlmann (KS) representation. The KS representation is a generalization of the representation underlying Loop Quantum Gravity (LQG) which supports, in addition to the usual LQG operators, the action of `background exponential operators' which are connection dependent operators labelled by `background' $su(2)$ electric fields. KS states have, in addition to the LQG state label corresponding to 1 dimensional excitations of the triad, a label corresponding to a `background' electric field which describes 3 dimensional excitations of the triad. Asymptotic behaviour in quantum theory is controlled through asymptotic conditions on the background electric fields which label the {\\em states} and the background electric fields which label the {\\em operators}. Asymptotic conditions on the triad are imposed as conditions on the background electric field state label while confining the LQG spin net graph labels to compact sets. We show that KS states can be realised as wave functions on a quantum configuration space of generalized connections and that the asymptotic behaviour of each such generalized connection is determined by that of the background electric fields which label the background exponential operators. Similar to the spatially compact case, the Gauss Law and diffeomorphism constraints are then imposed through Group Averaging techniques to obtain a large sector of gauge invariant states. It is shown that this sector supports a unitary action of the group of asymptotic rotations and translations and that, as anticipated by Friedman and Sorkin, for appropriate spatial topology, this sector contains states which display fermionic behaviour under $2\\pi$ rotations.

  7. State geothermal commercialization programs in seven Rocky Mountain states. Semiannual progress report, July-December 1981

    SciTech Connect (OSTI)

    Lunis, B.C. (ed.)

    1982-08-01T23:59:59.000Z

    The activities and findings of the seven state commercialization teams participating in the Rocky Mountain Basin and Range commercialization program are described. The period covered is July through December 1981. Background information is provided, program objectives and the technical approach used are discussed, and the benefits of the program are described. Prospect identification, area development plans, site specific development analyses, time-phased project plans, the aggregated prospective geothermal energy use, and institutional analyses are discussed. Public outreach activities are covered and findings and recommendations are summarized.

  8. State geothermal commercialization programs in seven Rocky Mountain states. Semiannual progress report, July-December 1980

    SciTech Connect (OSTI)

    Lunis, B. C.; Toth, W. J. [comps.

    1981-10-01T23:59:59.000Z

    The activities and findings of the seven state commercialization teams participating in the Rocky Mountain Basin and Range commercialization program are described. Background information is provided; program objectives and the technical approach that is used are discussed; and the benefits of the program are described. The summary of findings is presented. Prospect identification, area development plans, site specific development analyses, time-phased project plans, the aggregated prospective geothermal energy use, and institutional analyses are discussed. Public outreach activities are covered and findings and recommendations are summarized. The commercialization activities carried out by the respective state teams are described for the following: Colorado, Montana, New Mexico, North Dakota, South Dakota, Utah, and Wyoming.

  9. State geothermal commercialization programs in seven Rocky Mountain states. Semiannual progress report, January-July 1981

    SciTech Connect (OSTI)

    Lunis, B.C.; Toth, W.J. (comps.)

    1982-05-01T23:59:59.000Z

    The activities and findings of the seven state commercialization teams participating in the Rocky Mountain Basin and Range commercialization program are described. For each state (Colorado, Montana, New Mexico, North and South Dakota, Utah, and Wyoming), prospect identification, area development plans, site specific development analyses, time-phased project plans, the aggregated prospective geothermal energy use, and institutional analyses are discussed. Public outreach activities are also covered, and findings and recommendations are given for each state. Some background information about the program is provided. (LEW)

  10. 1 -SUBTIDAL 2 -INTERTIDAL RB ROCK UB UNCONSOLIDATED AB AQUATIC BED RF -REEF OW -OPEN WATER/ AB AQUATIC BED RF REEF RS ROCKY SHORE US -UNCONSOLIDATED

    E-Print Network [OSTI]

    Gray, Matthew

    M - MARINE 1 - SUBTIDAL 2 - INTERTIDAL RB ­ ROCK UB ­ UNCONSOLIDATED AB ­ AQUATIC BED RF - REEF OW - OPEN WATER/ AB ­ AQUATIC BED RF­ REEF RS ­ ROCKY SHORE US - UNCONSOLIDATED BOTTOM BOTTOM Unknown Bottom ­ UNCONSOLIDATED AB ­ AQUATIC RF ­ REEF OW - OPEN WATER/ AB ­ AQUATIC RF­ REEF SB ­ STREAMBED RS - ROCKY US

  11. Left invertibility, flatness and identifiability of switched linear dynamical systems: a framework

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Left invertibility, flatness and identifiability of switched linear dynamical systems: a framework invertibility and flatness, dynamical systems are structurally equivalent to some specific cryptographic invertibility, flatness and identifiability of discrete- time switched linear systems are investigated

  12. atomically flat gold: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Flat(Tire1) Intact(Tire1) StartFinish Inflate(Tire1 Starner, Thad E. 147 Local and global instabilities in nanosize rectangular prismatic gold specimens R.C. Batra *, A.A....

  13. Seismic rehabilitation of a reinforced concrete flat-slab structure

    E-Print Network [OSTI]

    Jimenez, Laila Margarita

    1999-01-01T23:59:59.000Z

    The effectiveness of seismic rehabilitation techniques used to eliminate punching shear failures was assessed for flat-slab structural systems. This type of retrofit was evaluated for a four-story reinforced concrete (RC) frame office building...

  14. Modified Ricci flow and asymptotically non-flat spaces

    E-Print Network [OSTI]

    Shubhayu Chatterjee; Narayan Banerjee

    2013-04-08T23:59:59.000Z

    The present work extends the application of a modified Ricci flow equation to an asymptotically non flat space, namely Marder's cylindrially symmetric space. It is found that the flow equation has a solution at least in a particular case.

  15. Interacting holographic dark energy model in non-flat universe

    E-Print Network [OSTI]

    M R Setare

    2006-10-14T23:59:59.000Z

    We employ the holographic model of interacting dark energy to obtain the equation of state for the holographic energy density in non-flat (closed) universe enclosed by the event horizon measured from the sphere of horizon named $L$.

  16. The Redshift Distribution of Flat-Spectrum Radio Sources

    E-Print Network [OSTI]

    J. A. Munoz; E. E. Falco; C. S. Kochanek; J. Lehar; E. Mediavilla

    2003-05-20T23:59:59.000Z

    The redshift distribution of flat-spectrum radio sources with 5 GHz flux densities S>5 mJy is a key component in using current radio lens surveys to probe the cosmological model. We have constructed the first flat-spectrum radio sample in the flux density range 3-20 mJy. Our new sample has 33 sources; we have determined the redshifts of 14 of these (42% complete). The low mean redshift, ~0.75, of our faintest sample needs to be confirmed by further observations to improve the sample completeness. We also increased the redshift completeness of several surveys of brighter flat-spectrum sources. While the mean redshift, ~1.1 of flat-spectrum samples fainter than 1 Jy is nearly constant, the fraction of the sources identifiable as quasars steadily drops from ~80% to ~10% as the flux density of the sources decreases.

  17. Theoretical Emission Spectra of Atmospheres of Hot Rocky Super-Earths

    E-Print Network [OSTI]

    Ito, Yuichi; Kawahara, Hajime; Nagahara, Hiroko; Kawashima, Yui; Nakamoto, Taishi

    2015-01-01T23:59:59.000Z

    Motivated by recent detection of transiting high-density super-Earths, we explore the detectability of hot rocky super-Earths orbiting very close to their host stars. In the environment hot enough for their rocky surfaces to be molten, they would have the atmosphere composed of gas species from the magma oceans. In this study, we investigate the radiative properties of the atmosphere that is in the gas/melt equilibrium with the underlying magma ocean. Our equilibrium calculations yield Na, K, Fe, Si, SiO, O, and O$_2$ as the major atmospheric species. We compile the radiative-absorption line data of those species available in literature, and calculate their absorption opacities in the wavelength region of 0.1--100~$\\mathrm{\\mu m}$. Using them, we integrate the thermal structure of the atmosphere. Then, we find that thermal inversion occurs in the atmosphere because of the UV absorption by SiO. In addition, we calculate the ratio of the planetary to stellar emission fluxes during secondary eclipse, and find pr...

  18. Variable effects of a kelp foundation species on rocky intertidal diversity and species interactions in central California

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    Variable effects of a kelp foundation species on rocky intertidal diversity and species Facilitation Foundation species Kelp Negative effects Species diversity The effect of foundation species scales. Egregia menziesii (Turner) J.E. Areschoug is a large and robust perennial kelp that creates

  19. Convective Snowbands Downstream of the Rocky Mountains in an Environment with Conditional, Dry Symmetric, and Inertial Instabilities

    E-Print Network [OSTI]

    Schumacher, Russ

    Convective Snowbands Downstream of the Rocky Mountains in an Environment with Conditional, Dry quickly equatorward. The bands occurred downstream of complex terrain on the anticyclonic-shear side banners downstream of mountains, and in association with frontogenetical ascent along two baroclinic zones

  20. Flattening Scientific CCD Imaging Data with a Dome Flat Field System

    E-Print Network [OSTI]

    J. L. Marshall; D. L. DePoy

    2005-10-07T23:59:59.000Z

    We describe the flattening of scientific CCD imaging data using a dome flat field system. The system uses light emitting diodes (LEDs) to illuminate a carefully constructed dome flat field screen. LEDs have several advantages over more traditional illumination sources: they are available in a wide range of output wavelengths, are inexpensive, have a very long source lifetime, and are straightforward to control digitally. The circular dome screen is made of a material with Lambertian scattering properties that efficiently reflects light of a wide range of wavelengths and incident angles. We compare flat fields obtained using this new system with two types of traditionally-constructed flat fields: twilight sky flats and nighttime sky flats. Using photometric standard stars as illumination sources, we test the quality of each flat field by applying it to a set of standard star observations. We find that the dome flat field system produces flat fields that are superior to twilight or nighttime sky flats, particularly for photometric calibration. We note that a ratio of the twilight sky flat to the nighttime sky flat is flat to within the expected uncertainty; but since both of these flat fields are inferior to the dome flat, this common test is not an appropriate metric for testing a flat field. Rather, the only feasible and correct method for determining the appropriateness of a flat field is to use standard stars to measure the reproducibility of known magnitudes across the detector.

  1. Relativistic electromagnetic flat top solitons and their stability

    SciTech Connect (OSTI)

    Sundar, Sita; Das, Amita; Saxena, Vikrant; Kaw, Predhiman; Sen, Abhijit [Institute for Plasma Research, Bhat, Gandhinagar-382428 (India)

    2011-11-15T23:59:59.000Z

    The inclusion of ion response in the study of relativistically intense electromagnetic laser pulse propagation in plasma yields certain distinct varieties of single peak solitonic structures. A flat top slow moving structure (for which the various fields have a flat profile over a wide spatial range) is one such solution. A detailed characterization of these solutions along with the eigen spectrum of their formation in the parameter space has been presented. The evolution of this particular solution is studied in detail with the help of a coupled fluid Maxwell set of equations. The study shows that the flat top solution is unstable. The instability is characterized as the backward Brillouin instability for which the electron quiver velocity plays the role of the effective temperature.

  2. Wave interaction with a fixed vertical flat plate

    E-Print Network [OSTI]

    Glover, Lanny Bruce

    1985-01-01T23:59:59.000Z

    . Hydrofoil definition sketch. The sharp-edged gust problem and the problem of a step-wise cnange in the velocity perpendicular to the foil offers insight into the response of a foil subject to an oscillating fluid. A sharp-edged gust with an initial... forces on a thin flat plate with a standard hydrofoil thickness was determined experimentally in a two-dimensional wave tank. Non-dimensional parameters were plotted and used to evaluate the data. It was shown that lift can be generated on a flat...

  3. Superintegrability in a non-conformally-flat space

    E-Print Network [OSTI]

    E. G. Kalnins; J. M. Kress; W. Miller Jr

    2012-11-07T23:59:59.000Z

    Superintegrable systems in two- and three-dimensional spaces of constant curvature have been extensively studied. From these, superintegrable systems in conformally flat spaces can be constructed by Staeckel transform. In this paper a method developed to establish the superintegrability of the Tremblay-Turbiner-Winternitz system in two dimensions is extended to higher dimensions and a superintegrable system on a non-conformally-flat four-dimensional space is found. In doing so, curvature corrections to the corresponding classical potential are found to be necessary. It is found that some subalgebras of the symmetry algebra close polynomially.

  4. Interacting agegraphic dark energy models in non-flat universe

    E-Print Network [OSTI]

    Ahmad Sheykhi

    2009-09-12T23:59:59.000Z

    A so-called "agegraphic dark energy" was recently proposed to explain the dark energy-dominated universe. In this Letter, we generalize the agegraphic dark energy models to the universe with spatial curvature in the presence of interaction between dark matter and dark energy. We show that these models can accommodate $w_D = -1 $ crossing for the equation of state of dark energy. In the limiting case of a flat universe, i.e. $k = 0$, all previous results of agegraphic dark energy in flat universe are restored.

  5. Film cooling on a flat plate: investigating density

    E-Print Network [OSTI]

    Grizzle, Joshua Peter Fletcher

    2009-05-15T23:59:59.000Z

    This study is an investigation of two specific effects on turbine blade film cooling. The effect of coolant to mainstream density ratio and upstream steps was studied. The studies were conducted on two flat plates with 4mm cylindrical film cooling...

  6. Avoidance of a Landau pole by flat contributions in QED

    SciTech Connect (OSTI)

    Klaczynski, Lutz, E-mail: lutz.klaczynski@gmx.de [Department of Physics, Humboldt University Berlin, 12489 Berlin (Germany); Kreimer, Dirk, E-mail: kreimer@mathematik.hu-berlin.de [Alexander von Humboldt Chair in Mathematical Physics, Humboldt University, Berlin 12489 (Germany)

    2014-05-15T23:59:59.000Z

    We consider massless Quantum Electrodynamics in the momentum scheme and carry forward an approach based on DysonSchwinger equations to approximate both the ?-function and the renormalized photon self-energy (Yeats, 2011). Starting from the CallanSymanzik equation, we derive a renormalization group (RG) recursion identity which implies a non-linear ODE for the anomalous dimension and extract a sufficient but not necessary criterion for the existence of a Landau pole. This criterion implies a necessary condition for QED to have no such pole. Solving the differential equation exactly for a toy model case, we integrate the corresponding RG equation for the running coupling and find that even though the ?-function entails a Landau pole it exhibits a flat contribution capable of decreasing its growth, in other cases possibly to the extent that such a pole is avoided altogether. Finally, by applying the recursion identity, we compute the photon propagator and investigate the effect of flat contributions on both spacelike and timelike photons. -- Highlights: We present an approach to approximate both the ?-function and the photon self-energy. We find a sufficient criterion for the self-energy to entail the existence of a Landau pole. We study non-perturbative flat contributions that emerge within the context of our approach. We discuss a toy model and how it is affected by flat contributions.

  7. Flatness of heavy chain systems Nicolas Petit 1

    E-Print Network [OSTI]

    .e. trolleys carrying a fixed length heavy chain that may carry a load, is addressed in the partial derivatives the homogeneous chain carrying a load, see equation (13). In [11] the flatness [3, 4] of heavy chain systems, i dimensional case. Under small angle approximations, these heavy chain systems are described by a 1D partial

  8. No Open or Flat Bouncing Cosmologies in Einstein Gravity

    E-Print Network [OSTI]

    Parikh, Maulik K

    2015-01-01T23:59:59.000Z

    We show that bouncing open or flat Friedmann-Robertson-Walker cosmologies are inconsistent with worldsheet string theory to first approximation. Specifically, the Virasoro constraint translates to the null energy condition in spacetime at leading order in the alpha-prime expansion. Thus one must go beyond minimally-coupled Einstein gravity in order to find bounce solutions.

  9. Interacting generalized Chaplygin gas model in non-flat universe

    E-Print Network [OSTI]

    M R Setare

    2007-11-04T23:59:59.000Z

    We employ the generalized Chaplygin gas of interacting dark energy to obtain the equation of state for the generalized Chaplygin gas energy density in non-flat universe. By choosing a negative value for $B$ we see that $w_{\\rm \\Lambda}^{eff}< -1$, that corresponds to a universe dominated by phantom dark energy.

  10. Differentially Flat Trajectory Generation for a Dynamically Stable Mobile Robot

    E-Print Network [OSTI]

    for the ballbot, a dynamically stable mobile robot which balances on a single spherical wheel. To this end, assumptions are made to form the system as differentially flat, and a method of deriving feasible trajectories, dynamically stable mobile robot. It is a human-sized robot that balances on a single spherical wheel

  11. Mini-Course ECC'97, Brussels 8 FLAT SYSTEMS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Mini-Course ECC'97, Brussels 8 FLAT SYSTEMS Ph. Martin R.M. Murray P. Rouchon Centre Automatique et Syst`emes, ´Ecole des Mines de Paris, 35 rue Saint-Honor´e, 77305 Fontainebleau, FRANCE. [martin. murray@indra.caltech.edu. Introduction Control systems are ubiquitous in modern technology. The use

  12. The effects of cattle grazing on Texas coastal salt marsh plants and birds

    E-Print Network [OSTI]

    Yeargan, Catherine A

    2001-01-01T23:59:59.000Z

    Cattle grazing effects on plants and birds were examined in Spartina alterniflora-dominated marsh and adjacent Sporobolus virginicus-dominated hummocks within high tidal flats on Galveston Island, Texas. Grazed and ungrazed treatments were...

  13. Site plan safety submission for sampling, monitoring, decontamination of GB agent - north plant Rocky Mountain Arsenal. Volume 2

    SciTech Connect (OSTI)

    Not Available

    1988-10-01T23:59:59.000Z

    During TVA's visit and survey of RMA's GB facility, sample points were identified (Table A-1). The sample points initially identified were from Buildings 1501, 1503, 1603, 1506, 1601, 1601A, and 1602. Piping isometrics were produced for each sample point identified and are shown in Appendix B. After a careful review of each sample point and discussions with RMA personnel, 67 of the original sample points were eliminated. The sample points eliminated consisted of all ventilation points and process equipment/piping that is open to the atmosphere.

  14. Site plan safety submission for sampling, monitoring, decontamination of GB agent - north plant Rocky Mountain Arsenal. Volume 1

    SciTech Connect (OSTI)

    Not Available

    1988-10-01T23:59:59.000Z

    The scope of this site plan safety submission (SPSS), includes: sampling plan to determine if GB is a contaminant in equipment and piping used in the production and demil processes; monitoring plan for personnel involved in the sampling effort; decon plan for personnel, equipment, and piping should contamination be identified. Additional sections and appendices include: historical use of bldg 1501, 1503, 1504, 1506, 1601, 1602, 1603, 1606; chemical information on GB; safety requirements; medical requirements and first aid procedures; piping drawings; rma sop's for sampling, monitoring, and decon.

  15. A Ten Step Protocol and Plan for CCS Site Characterization, Based on an Analysis of the Rocky Mountain Region, USA

    SciTech Connect (OSTI)

    McPherson, Brian; Matthews, Vince

    2013-09-15T23:59:59.000Z

    This report expresses a Ten-Step Protocol for CO2 Storage Site Characterization, the final outcome of an extensive Site Characterization analysis of the Rocky Mountain region, USA. These ten steps include: (1) regional assessment and data gathering; (2) identification and analysis of appropriate local sites for characterization; (3) public engagement; (4) geologic and geophysical analysis of local site(s); (5) stratigraphic well drilling and coring; (6) core analysis and interpretation with other data; (7) database assembly and static model development; (8) storage capacity assessment; (9) simulation and uncertainty assessment; (10) risk assessment. While the results detailed here are primarily germane to the Rocky Mountain region, the intent of this protocol is to be portable or generally applicable for CO2 storage site characterization.

  16. State geothermal commercialization programs in ten Rocky Mountain states. Semi-annual progress report, July-December 1979

    SciTech Connect (OSTI)

    Griffith, J.L. (comp.)

    1980-08-01T23:59:59.000Z

    The activities and findings of the ten state teams participating in the Rocky Mountain Basin and Range Regional Hydrothermal Commercialization Program for the period are described. A summary of the state projects, compilation of project accomplishments, summary of findings, and a description of the major conclusions and recommendations are presented. Also included are chapters on the commercialization activities carried out by individual teams in each state: Arizona, Colorado, Idaho, Montana, Nevada, New-Mexico, North Dakota, South Dakota, Utah, and Wyoming. (MHR)

  17. Coal in the Northern Rocky Mountains and Great Plains Region -- Clean, compliant, and available

    SciTech Connect (OSTI)

    Stricker, G.D.; Ellis, M.S.; Flores, R.M.; Bader, L.R. [Geological Survey, Denver, CO (United States)

    1998-12-31T23:59:59.000Z

    The Northern Rocky Mountains and Great Plains region produced over 340 million short tons of coal in 1997, approximately 30 percent of the nation`s total coal production. Coals from this region are shipped to 26 states in the western, midwest, southern, and eastern US and production is projected to increase to 415 million short tons by 2015; the projected increase will be utilized primarily for production of electric power. The coals are economically attractive because they can be produced by surface mining, and do not require costly beneficiation to be compliant with emission standards. The coals are compliant because their chemical composition was influenced by tectonic settings of the coal basins and provenance of the sediments entering the basins. Tectonics during the Paleocene also influenced rates of precipitation and depositional systems. These factors, in concert, controlled the amount, distribution, and levels of sulfur, ash, and trace elements of environmental concern in the region`s coals. The emphasis of this paper is on the chemistry of these thick, high-quality coals and the geologic controls that resulted in their accumulation.

  18. Field testing of new multilateral drilling and completion technology at the Rocky Mountain Oilfield Testing Center

    SciTech Connect (OSTI)

    Giangiacomo, L.A. [Fluor Daniel NPOSR, Inc., Casper, WY (United States). Rocky Mountain Oilfield Testing Center

    1998-12-31T23:59:59.000Z

    The Rocky Mountain Oilfield Testing Center (RMOTC) has played an important role in bringing new multilateral well technology to the marketplace. Multilateral technology is more complex than most new technologies being brought to the oilfield. It is very difficult to test new designs in the laboratory or conventional test wells. They must be tested downhole in specialized wells to work out design and procedural details. Most of the applications for multilateral technology are in high cost drilling areas, such as offshore or in remote, environmentally sensitive areas. For this reason, opportunities for testing the new technology in the course of routine drilling and completion operations are scarce. Operators are not willing to risk expensive rig time, or losing a wellbore itself, on a test. RMOTC offers a neutral site where the technology can be tested in a relatively low cost environment. There are two drilling rigs and three workover and completion rigs available. Most associated services such as warehouse, roustabouts, backhoe, welders, and mechanics are also available on site, while specialized oilfield services and machine shops are available in nearby Casper. Technologies such as the hollow whipstock, adjustable stabilizer, downhole kickoff assembly, single trip sidetrack tool, stacked multidrain system, rotary steerable systems, and procedures for abandoning an open hole lateral have benefited through the use of RMOTC`s facilities. This paper details the capabilities of the new technologies and the benefits of testing them in a real oilfield environment before taking them to market.

  19. Plane-parallel waves as duals of the flat background

    E-Print Network [OSTI]

    Ladislav Hlavaty; Ivo Petr

    2014-12-03T23:59:59.000Z

    We give a classification of non-Abelian T-duals of the flat metric in D=4 dimensions with respect to the four-dimensional continuous subgroups of the Poincare group. After dualizing the flat background, we identify majority of dual models as conformal sigma models in plane-parallel wave backgrounds, most of them having torsion. We give their form in Brinkmann coordinates. We find, besides the plane-parallel waves, several diagonalizable curved metrics with nontrivial scalar curvature and torsion. Using the non-Abelian T-duality, we find general solution of the classical field equations for all the sigma models in terms of d'Alembert solutions of the wave equation.

  20. Evaluation of tracking flat plate and concentrator PV systems

    SciTech Connect (OSTI)

    Lepley, T. [Phasor Energy Co., Phoenix, AZ (United States); Hammond, B.; Harris, A. [Arizona State Univ., Tempe, AZ (United States)

    1997-12-31T23:59:59.000Z

    Arizona Public Service Company has conducted side-by-side field tests of most of the leading tracking flat plate and concentrating PV technologies. The results verify the added value due to tracking, but show that additional reliability improvements are needed in most cases. Concentrator PV systems can be high performers in sunny regions. In addition, a novel inverter system design by Raytheon has demonstrated excellent performance and promises to be more reliable and have lower cost than competing technologies.

  1. Distributed Roughness Receptivity in a Flat Plate Boundary Layer

    E-Print Network [OSTI]

    Kuester, Matthew Scott

    2014-04-18T23:59:59.000Z

    - Distributed Receptivity . . . . . 6 2. FACILITY DESCRIPTION - THE KLEBANOFFSARIC WIND TUNNEL 11 2.1 Test Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.2 Fan and Motor... of this dissertation describes the KlebanoffSaric Wind Tunnel facility, which was used for this experiment. Section 3 describes the experimental setup (roughness design and the flat plate model) and defines the metrics by which the flow field is decomposed...

  2. MEASURING THE JET POWER OF FLAT-SPECTRUM RADIO QUASARS

    SciTech Connect (OSTI)

    Shabala, S. S.; Santoso, J. S. [School of Mathematics and Physics, University of Tasmania, Private Bag 37, Hobart, TAS 7001 (Australia); Godfrey, L. E. H. [International Centre for Radio Astronomy Research, Curtin University, GPO Box U1987, Perth, Western Australia 6845 (Australia)

    2012-09-10T23:59:59.000Z

    We use frequency-dependent position shifts of flat-spectrum radio cores to estimate the kinetic power of active galactic nucleus (AGN) jets. We find a correlation between the derived jet powers and AGN narrow-line luminosity, consistent with the well-known relation for radio galaxies and steep spectrum quasars. This technique can be applied to intrinsically weak jets even at high redshift.

  3. Sex, dispersion and aggression in Western Sandpipers on the Bolivar Flats, Texas

    E-Print Network [OSTI]

    Gordon, Lynn Marie

    2012-06-07T23:59:59.000Z

    Flats, located on the Bolivar Peninsula, 4. 8 km northeast of Galveston, Texas. The wintering range of Western Sandpipers extends from California and North Carolina in the north, south to Peru and Surinam (AOU 1983). The Bolivar Flats, located...

  4. Asymptotically flat radiating solutions in third order Lovelock gravity

    SciTech Connect (OSTI)

    Dehghani, M. H. [Physics Department and Biruni Observatory, College of Sciences, Shiraz University, Shiraz 71454 (Iran, Islamic Republic of); Research Institute for Astrophysics and Astronomy of Maragha (RIAAM), Maragha (Iran, Islamic Republic of); Farhangkhah, N. [Physics Department and Biruni Observatory, College of Sciences, Shiraz University, Shiraz 71454 (Iran, Islamic Republic of)

    2008-09-15T23:59:59.000Z

    In this paper, we present an exact spherically symmetric solution of third order Lovelock gravity in n dimensions which describes the gravitational collapse of a null dust fluid. This solution is asymptotically (anti-)de Sitter or flat depending on the choice of the cosmological constant. Using the asymptotically flat solution for n{>=}7 with a power-law form of the mass as a function of the null coordinate, we present a model for a gravitational collapse in which a null dust fluid radially injects into an initially flat and empty region. It is found that a naked singularity is inevitably formed whose strength is different for the n=7 and n{>=}8 cases. In the n=7 case, the limiting focusing condition for the strength of curvature singularity is satisfied. But for n{>=}8, the strength of curvature singularity depends on the rate of increase of mass of the spacetime. These considerations show that the third order Lovelock term weakens the strength of the curvature singularity.

  5. Thermal response of a flat heat pipe sandwich structure to a localized heat flux

    E-Print Network [OSTI]

    Wadley, Haydn

    Thermal response of a flat heat pipe sandwich structure to a localized heat flux G. Carbajal a , C The temperature distribution across a flat heat pipe sandwich structure, subjected to an intense localized thermal to the evaporator side of the flat heat pipe, while the condenser side was cooled via natural convective

  6. Compilation of data on strippable Fort Union coals in the northern Rocky Mountains and Great Plains region: A CD-ROM presentation

    SciTech Connect (OSTI)

    Flores, R.M.; Bader, L.R.; Cavaroc, V.V. [Geological Survey, Denver, CO (United States)] [and others

    1998-04-01T23:59:59.000Z

    The Fort Union Formation and equivalent formations of Paleocene age in the northern Rocky Mountains and Great Plains region contain 14 strippable coals that yielded more than 30 percent of the 1.03 billion short tons produced in the United States in 1996. These thick, low contaminant, compliant coals, which are utilized by electric power plants in 28 States, are being assessed by the US Geological Survey. The minable coals occur in the Powder River Basin in Wyoming and Montana, Hanna, Carbon and Greater Green River Basins in Wyoming, and Williston Basin in North Dakota. Production during the past 25 years of thick, high quality Fort Union and equivalent coal beds and zones in the region increased from 40 to more than 340 million short tons. The Powder River Basin is projected to produce 416 million short tons of coal in 2015. Major production in the Powder River Basin is from the Wyodak-Anderson, Anderson-Dietz, and Rosebud coal deposits. Producing Fort Union coals in the Williston Basin include the Beulah-Zap, Hagel, and Harmon coal deposits. Producing Fort Union coals in the Greater Green River Basin are in five beds of the Deadman coal zone. Coal production in the Hanna Basin is from eight beds in the Ferris and Hanna Formations. Coals in the Powder River Basin and Williston Basin contain much less sulfur and ash than coals produced in other regions in the conterminous US. When sulfur values are compared as pounds of SO{sub 2} per million Btu (as received basis), Powder River Basin and Williston Basin coals have the lowest amounts of any coals in the conterminous US.

  7. Water quality changes as a result of coalbed methane development in a Rocky mountain watershed

    SciTech Connect (OSTI)

    Wang, X.; Melesse, A.M.; McClain, M.E.; Yang, W. [Tarleton State University, Stephenville, TX (USA)

    2007-12-15T23:59:59.000Z

    Coalbed methane (CBM) development raises serious environmental concerns. In response, concerted efforts have been made to collect chemistry, salinity, and sodicity data on CBM produced water. However, little information on changes of stream water quality resulting from directly and/or indirectly received CBM produced water is available in the literature. The objective of this study was to examine changes in stream water quality, particularly sodicity and salinity, due to CBM development in the Powder River watershed, which is located in the Rocky Mountain Region and traverses the states of Wyoming and Montana. To this end, a retrospective analysis of water quality trends and patterns was conducted using data collected from as early as 1946 up to and including 2002 at four U.S. Geological Survey gauging stations along the Powder River. Trend analysis was conducted using linear regression and Seasonal Kendall tests, whereas, Tukey's test for multiple comparisons was used to detect changes in the spatial pattern. The results indicated that the CBM development adversely affected the water quality in the Powder River. First, the development elevated the stream sodicity, as indicated by a significant increase trend of the sodium adsorption ratio. Second, the development tended to shrink the water quality differences among the three downstream stations but to widen the differences between these stations and the farthest upstream station. In contrast, the development had only a minor influence on stream salinity. Hence, the CBM development is likely an important factor that can be managed to lower the stream sodicity. The management may need to take into account that the effects of the CBMdevelopment were different from one location to another along the Powder River.

  8. Dispersion by chemical reaction of Rocky Mountain Arsenal Basin F waste soils

    SciTech Connect (OSTI)

    Payne, J.R.; Marion, G.M.

    1997-02-01T23:59:59.000Z

    Many military installations have soil contamination problems that range from heavy metals to petroleum products. Rocky Mountain Arsenal (RMA) Basin F contains high concentrations of salts, heavy metals, ammonia, urea, and organics. The Dispersion by Chemical Reaction (DCR) process leads to a reduction in the mobility of the organic and inorganic constituents by first removing volatile constituents via steam stripping and volatilization, then trapping the nonvolatile contaminants in a nonmobile phase (microencapsulation), and finally compacting the treated material into large soil bodies (macroencapsulation). This report summarizes the results of the DCR testing of soil-amended Basin F sludge from RMA. The primary focus of this study is on pesticide leachability. The DCR process used to treat the Basin F waste soil produced a dry, homogeneous, soil-like material with desirable physical properties that on compaction achieved the following remediation goals: reduction of all leachable volatiles to nondetectable levels, confinement of all metals to below RCRA TCLP levels, and a decrease in pesticide leachability to levels approaching RCRA standards. For example, endrin TCLP concentration was reduced from 74 microgram/L to 20-28 microgram/L (regulatory limit = 20 ug/L). In several cases, reductions in pesticide leachability could be attributed to simple dilution with the calcium oxide (CaO) reagent. However in other cases, microencapsulation and/or macroencapsulation also played a role in reducing pesticide leachability. Additional work is necessary to optimize the amounts of lime-milk, hydrophobic CaO, and benign oil used in the processing of RMA Basin F waste soils. Ideally, the optimum design should achieve the regulatory and client goals, while minimizing materials handling, energy, and reagent inputs.

  9. Entanglement entropy in Galilean conformal field theories and flat holography

    E-Print Network [OSTI]

    Arjun Bagchi; Rudranil Basu; Daniel Grumiller; Max Riegler

    2014-10-15T23:59:59.000Z

    We present the analytical calculation of entanglement entropy for a class of two dimensional field theories governed by the symmetries of the Galilean conformal algebra, thus providing a rare example of such an exact computation. These field theories are the putative holographic duals to theories of gravity in three-dimensional asymptotically flat spacetimes. We provide a check of our field theory answers by an analysis of geodesics. We also exploit the Chern-Simons formulation of three-dimensional gravity and adapt recent proposals of calculating entanglement entropy by Wilson lines in this context to find an independent confirmation of our results from holography.

  10. East Flat Rock, North Carolina: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address:011-DNA Jump37. It is classified asThis article is aAg Products JumpFarmingdale, NewFlat

  11. Deep Resistivity Structure of Yucca Flat, Nevada Test Site, Nevada.

    SciTech Connect (OSTI)

    Theodore H. Asch, Brian D. Rodriguez; Jay A. Sampson; Erin L. Wallin; and Jackie M. Williams.

    2006-09-18T23:59:59.000Z

    The Department of Energy (DOE) and the National Nuclear Security Administration (NNSA) at their Nevada Site Office are addressing groundwater contamination resulting from historical underground nuclear testing through the Environmental Management program and, in particular, the Underground Test Area project. One issue of concern is the nature of the somewhat poorly constrained pre Tertiary geology and its effects on ground-water flow in the area adjacent to a nuclear test. Ground water modelers would like to know more about the hydrostratigraphy and geologic structure to support a hydrostratigraphic framework model that is under development for the Yucca Flat Corrective Action Unit (CAU). During 2003, the U.S. Geological Survey, supported by the DOE and NNSA-NSO, collected and processed data from 51 magnetotelluric (MT) and audio-magnetotelluric (AMT) stations at the Nevada Test Site in and near Yucca Flat to assist in characterizing the pre-Tertiary geology in that area. The primary purpose was to refine the character, thickness, and lateral extent of pre Tertiary confining units. In particular, a major goal has been to define the upper clastic confining unit (late Devonian Mississippian-age siliciclastic rocks assigned to the Eleana Formation and Chainman Shale) in the Yucca Flat area. The MT and AMT data have been released in separate USGS Open File Reports. The Nevada Test Site magnetotelluric data interpretation presented in this report includes the results of detailed two-dimensional (2 D) resistivity modeling for each profile (including alternative interpretations) and gross inferences on the three dimensional (3 D) character of the geology beneath each station. The character, thickness, and lateral extent of the Chainman Shale and Eleana Formation that comprise the Upper Clastic Confining Unit are generally well determined in the upper 5 km. Inferences can be made regarding the presence of the Lower Clastic Confining Unit at depths below 5 km. Large fault structures such as the CP Thrust fault, the Carpetbag fault, and the Yucca fault that cross Yucca Flat are also discernable as are other smaller faults. The subsurface electrical resistivity distribution and inferred geologic structures determined by this investigation should help constrain the hydrostratigraphic framework model that is under development.

  12. Big Flats, Wisconsin: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: Energy ResourcesJersey: EnergyBerthoud,Biodiesel Place:Forge07.Daddy sFlats,

  13. Windy Flats(3Q09 portion) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place:ReferenceEdit JumpWill County,Windspire EnergyFlats Jump

  14. Using Surface Impedance for Calculating Wakefields in Flat Geometry

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bane, Karl; Stupakov, Gennady

    2015-03-01T23:59:59.000Z

    Beginning with Maxwell's equations and assuming only that the wall interaction can be approximated by a surface impedance, we derive formulas for the generalized longitudinal and transverse impedance in flat geometry, from which the wakefields can also be obtained. From the generalized impedances, by taking the proper limits, we obtain the normal longitudinal, dipole, and quad impedances in flat geometry. These equations can be applied to any surface impedance, such as the known dc, ac, and anomalous skin models of wall resistance, a model of wall roughness, or one for a pipe with small, periodic corrugations. We show that, for the particular case of dc wall resistance, the longitudinal impedance obtained here agrees with a known result in the literature, a result that was derived from a very general formula by Henke and Napoly. As concrete example, we apply our results to representative beam and machine parameters in the undulator region of LCLS-II and estimate the impact of the transverse wakes on the machine performance.

  15. Rocky Mountain NP, Colorado Nitrogen emissions from a variety of human made sources, including ammonia

    E-Print Network [OSTI]

    MacDonald, Lee

    and gas production, wastewater treatment plants, landfills, fertilized crops, and livestock production comes into RMNP from both urban and rural areas in Colorado as well as from other states. Agricultural

  16. Developer Installed Treatment Plants

    E-Print Network [OSTI]

    unknown authors

    2008-01-01T23:59:59.000Z

    -installed treatment plants. These treatment plants are more commonly known as package wastewater treatment plants. 1

  17. System Advisor Model: Flat Plate Photovoltaic Performance Modeling Validation Report

    SciTech Connect (OSTI)

    Freeman, J.; Whitmore, J.; Kaffine, L.; Blair, N.; Dobos, A. P.

    2013-12-01T23:59:59.000Z

    The System Advisor Model (SAM) is a free software tool that performs detailed analysis of both system performance and system financing for a variety of renewable energy technologies. This report provides detailed validation of the SAM flat plate photovoltaic performance model by comparing SAM-modeled PV system generation data to actual measured production data for nine PV systems ranging from 75 kW to greater than 25 MW in size. The results show strong agreement between SAM predictions and field data, with annualized prediction error below 3% for all fixed tilt cases and below 8% for all one axis tracked cases. The analysis concludes that snow cover and system outages are the primary sources of disagreement, and other deviations resulting from seasonal biases in the irradiation models and one axis tracking issues are discussed in detail.

  18. Majorana Flat Bands in s-Wave Gapless Topological Superconductors

    E-Print Network [OSTI]

    Shusa Deng; Gerardo Ortiz; Amrit Poudel; Lorenza Viola

    2014-04-28T23:59:59.000Z

    We demonstrate how the non-trivial interplay between spin-orbit coupling and nodeless $s$-wave superconductivity can drive a fully gapped two-band topological insulator into a time-reversal invariant gapless topological superconductor supporting symmetry-protected Majorana flat bands. We characterize topological phase diagrams by a ${\\mathbb Z}_2 \\times{\\mathbb Z}_2$ partial Berry-phase invariant, and show that, despite the trivial crystal geometry, no unique bulk-boundary correspondence exists. We trace this behavior to the anisotropic quasiparticle bulk gap closing, linear vs. quadratic, and argue that this provides a unifying principle for gapless topological superconductivity. Experimental implications for tunneling conductance measurements are addressed, relevant for lead chalcogenide materials.

  19. Improving the diversity of manufacturing electroluminescent flat panel displays

    SciTech Connect (OSTI)

    Moss, T.S.; Samuels, J.A.; Smith, D.C. [and others

    1995-09-01T23:59:59.000Z

    Crystalline calcium thiogallate with a cerium dopant has been deposited by metal-organic chemical vapor deposition (MOCVD) at temperatures below 600{degrees}C on a low cost glass substrate. An EL luminance of 1.05 fL was observed 40 volts above threshold at 60 Hz. This is more than an order of magnitude improvement over earlier crystalline-as-deposited thiogallate materials. These results pave the way for the use of MOCVD as a potential method for processing full color thin-film electroluminescent (TFEL) flat panel displays. The formation of the CaGa{sub 2}S{sub 4}:Ce phosphor requires precise control over a number of deposition parameters including flow rates, substrate temperature, and reactor pressure. The influence of these parameters will be discussed in terms of structure, uniformity, and TFEL device performance.

  20. Diffractive optics for compact flat panel displays. Final report

    SciTech Connect (OSTI)

    Sweeney, D.; DeLong, K.

    1997-04-29T23:59:59.000Z

    Three years ago LLNL developed a practical method to dramatically reduce the chromatic aberration in single element diffractive imaging lenses. High efficiency, achromatic imaging lenses have been fabricated for human vision correction. This LDRD supported research in applying our new methods to develop a unique, diffraction-based optical interface with solid state, microelectronic imaging devices. Advances in microelectronics have led to smaller, more efficient components for optical systems. There have, however, been no equivalent advances in the imaging optics associated with these devices. The goal of this project was to replace the bulky, refractive optics in typical head-mounted displays with micro-thin diffractive optics to directly image flat-panel displays into the eye. To visualize the system think of the lenses of someone`s eyeglasses becoming flat-panel displays. To realize this embodiment, we needed to solve the problems of large chromatic aberrations and low efficiency that are associated with diffraction. We have developed a graceful tradeoff between chromatic aberrations and the diffractive optic thickness. It turns out that by doubling the thickness of a micro-thin diffractive lens we obtain nearly a two-times improvement in chromatic performance. Since the human eye will tolerate one diopter of chromatic aberration, we are able to achieve an achromatic image with a diffractive lens that is only 20 microns thick, versus 3 mm thickness for the comparable refractive lens. Molds for the diffractive lenses are diamond turned with sub-micron accuracy; the final lenses are cast from these molds using various polymers. We thus retain both the micro- thin nature of the diffractive optics and the achromatic image quality of refractive optics. During the first year of funding we successfully extended our earlier technology from 1 cm diameter optics required for vision applications up to the 5 cm diameter optics required for this application. 3 refs., 6 figs.

  1. E-Print Network 3.0 - amorphous selenium flat-panel Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    22 Licensable Technologies Summary: 12;Licensable Technologies Applications: n Solar Cells n Sensors n Flat Panels n IC Circuits... and low-performance, low-cost...

  2. amorphous silicon flat-panel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Asymmetric Electrical Properties of Half Corbino Hydrogenated Amorphous Silicon Thin-Film Transistor and Its Applications to Flat Panel Displays Materials Science...

  3. Flat space cosmologies in two dimensions - Phase transitions and asymptotic mass-domination

    E-Print Network [OSTI]

    Arjun Bagchi; Daniel Grumiller; Jakob Salzer; Sourav Sarkar; Friedrich Schller

    2014-08-22T23:59:59.000Z

    We study flat space cosmologies in two dimensions by taking the flat space limit of the Achucarro-Ortiz model. We unravel a phase transition between hot flat space and flat space cosmologies, and derive a new dilaton-dependent counterterm required for the consistency of the Euclidean partition function. Our results generalize to asymptotically mass-dominated 2-dimensional dilaton gravity models, whose thermodynamical properties we discuss. The novel case of asymptotic mass-domination is neither covered by the comprehensive discussion of hep-th/0703230 nor by the more recent generalization to dilaton gravity with confining U(1) charges in 1406.7007.

  4. 146 USDA Forest Service Proceedings RMRS-P-34. 2004. Abstract--Limber pine and Rocky Mountain bristlecone pine are currently threat-

    E-Print Network [OSTI]

    pine is ex- periencing mortality in the Northern Rocky Mountains and the infection front con- tinues and Sullivan 2004), at a site that is more than 220 miles away from the former infection front. No mortality as erect trees, clusters of erect trees and as wind-sculpted wedge-shaped shrubs (krummholz). Limber pine

  5. EA-1956: Site-Wide Environmental Assessment for the Divestiture of Rocky Mountain Oilfield Testing Center and Naval Petroleum Reserve No. 3, Natrona County, Wyoming

    Broader source: Energy.gov [DOE]

    Draft Site-Wide EA: Public Comment Period Ends 04/14/2014DOE is preparing an EA to assess potential environmental impacts of the proposed discontinuation of DOE operations at, and the proposed divestiture of, the Rocky Mountain Oilfield Testing Center (RMOTC) and Naval Petroleum Reserve Number 3 (NPR-3).

  6. Burgeoning Biomass: Creating Efficient and Sustainable Forest Biomass Supply Chains in the Rockies

    E-Print Network [OSTI]

    Mountain forests. Most active forest management activities on public and private land, such as thinning be converted into fuel, heat and electricity. Eagle Valley Clean Energy in Gypsum, Colorado, is one such facility, and is Colorado's first dedicated biomass power plant, producing 11.5 megawatts of electricity

  7. Late Quaternary geomorphology and soils in Crater Flat, Yucca Mountain area, southern Nevada

    E-Print Network [OSTI]

    Dorn, Ron

    Late Quaternary geomorphology and soils in Crater Flat, Yucca Mountain area, southern Nevada for a Crater Flat cation-leaching curve. This curve differs somewhat from a previous Yucca Mountain curve­10 from a previous ``surficial deposits'' stratigraphy used in the Yucca Mountain area. Although

  8. FLAT PLATE HEAT PIPES: FROM OBSERVATIONS TO THE MODELING OF THE CAPILLARY STUCTURE

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 FLAT PLATE HEAT PIPES: FROM OBSERVATIONS TO THE MODELING OF THE CAPILLARY STUCTURE Frédéric ABSTRACT This paper presents a synthesis of observations made inside six different flat plate heat pipes to estimate the performance of the heat pipe in a real application with several electronic components

  9. FOREST-AIR FLUXES OF CARBON, WATER AND ENERGY OVER NON-FLAT TERRAIN

    E-Print Network [OSTI]

    Lee, Xuhui

    FOREST-AIR FLUXES OF CARBON, WATER AND ENERGY OVER NON-FLAT TERRAIN XUHUI LEE and XINZHANG HU-air exchange of carbon, water, and energy was conducted at a mid-latitude, mixed forest on non-flat terrain to address this question, we conducted a field experiment on energy and carbon exchanges in a mixed forest

  10. Holographic Dark Energy with Time Varying n^2 Parameter in Non-Flat Universe

    E-Print Network [OSTI]

    Bushra Majeed; Mubasher Jamil; Azad A. Siddiqui

    2014-11-01T23:59:59.000Z

    We consider a holographic dark energy model, with a varying parameter, n, which evolves slowly with time. We obtain the differential equation describing evolution of the dark energy density parameter, $\\Omega_d$, for the flat and non-flat FRW universes. The equation of state parameter in this generalized version of holographic dark energy depends on n.

  11. Self-Assembly of Flat Micro Components by Capillary Forces and Shape Recognition

    E-Print Network [OSTI]

    Self-Assembly of Flat Micro Components by Capillary Forces and Shape Recognition J. Fang, S. Liang, K. Wang, X. Xiong, K. F. Böhringer* This paper summarizes our recent reports on self-assembly of flat micro components based on two major mechanisms: capillary-driven self-assembly and feature

  12. Universe Evolution in a 5D Ricci-flat Cosmology

    E-Print Network [OSTI]

    Chengwu Zhang; Hongya Liu; Lixin Xu; P. S. Wesson

    2006-03-02T23:59:59.000Z

    We use Wetterich's parameterization equation of state (EOS) of dark energy to a $5D$ Ricci-flat cosmological solution and we suppose the universe contains three major components: matter, radiation and dark energy. By using the relation between the scale factor and the redshift $z$, we show that the two arbitrary functions contained in the $5D$ solution could be solved out analytically in terms of the variable $z$. Thus the whole $5D$ solution could be constructed uniquely if the current values of the three density parameters $\\Omega_{m0}$, ${\\Omega_{r0}}$, $\\Omega_{x0}$, the EOS $w_{0}$%, and the bending parameter $b$ contained in the EOS are all known. Furthermore, we find that all the evolutions of the mass density $\\Omega_{m} $, the radiation density ${\\Omega_{r}}$, the dark energy density $\\Omega_{x}$, and the deceleration parameter $q$ depend on the bending parameter $b$ sensitively. Therefore it is deserved to study observational constraints on the bending parameter $b$.

  13. Cosmic constraint on unified model of dark sectors in flat and non-flat varying gravitational constant theory

    E-Print Network [OSTI]

    Lu, Jianbo; Wu, Yabo; Xu, Lixin

    2015-01-01T23:59:59.000Z

    Observations indicate that most universal matter are invisible and gravitational constant $G(t)$ maybe depends on the time. The theory of variation of $G$ (VG) is explored in this paper, with naturally resulting to the invisible components in universe. We utilize the observational data: lookback time data, model-independent gamma ray bursts data, growth function of matter linear perturbations, type Ia supernovae data with systematic errors, cosmic microwave background, and baryon acoustic oscillation data from the radial scale measurement and the peak-positions measurement, to restrict the unified model (UM) of dark components in VG theory. Using the best-fit values of parameters with the covariance matrix, constraints on the variation of $G$ are $(\\frac{G}{G_{0}})_{z=3.5}\\simeq 1.0003^{+0.0014}_{-0.0016}$ and $(\\frac{\\dot{G}}{G})_{today}\\simeq 0.7977^{+2.3566}_{-2.3566}\\times 10^{-13} yr^{-1}$ in a flat geometry, the small uncertainties around constants. Limit on equation of state of dark matter is $w_{0dm}=...

  14. Formation of compressed flat electron beams with high transverse-emittance ratios

    SciTech Connect (OSTI)

    Zhu, J. [Fermilab; Institute of Fluid Physics, CAEP, China; Piot, P. [Northern Illinois University; Fermilab; Mihalcea, D. [Northern Illinois University; Prokop, C. R. [Northern Illinois University

    2014-08-01T23:59:59.000Z

    Flat beamsbeams with asymmetric transverse emittanceshave important applications in novel light-source concepts and advanced-acceleration schemes and could possibly alleviate the need for damping rings in lepton colliders. Over the last decade, a flat beam generation technique based on the conversion of an angular-momentum-dominated beam was proposed and experimentally tested. In this paper we explore the production of compressed flat beams. We especially investigate and optimize the flat beam transformation for beams with substantial fractional energy spread. We use as a simulation example the photoinjector of Fermilabs Advanced Superconducting Test Accelerator. The optimizations of the flat beam generation and compression at Advanced Superconducting Test Accelerator were done via start-to-end numerical simulations for bunch charges of 3.2 nC, 1.0 nC, and 20 pC at ?37??MeV. The optimized emittances of flat beams with different bunch charges were found to be 0.25???m (emittance ratio is ?400), 0.13????m, 15 nm before compression, and 0.41???m, 0.20???m, 16 nm after full compression, respectively, with peak currents as high as 5.5 kA for a 3.2?nC flat beam. These parameters are consistent with requirements needed to excite wakefields in asymmetric dielectric-lined waveguides or produce significant photon flux using small-gap micro-undulators.

  15. Plants & Animals

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Los Alamos, NM 87545 (505) 667-0216 Email We sample many plants and animals, including wild and domestic crops, game animals, fish, and food products from animals, as well as...

  16. CO{sub 2} Sequestration Capacity and Associated Aspects of the Most Promising Geologic Formations in the Rocky Mountain Region: Local-Scale Analyses

    SciTech Connect (OSTI)

    Laes, Denise; Eisinger, Chris; Morgan, Craig; Rauzi, Steve; Scholle, Dana; Scott, Phyllis; Lee, Si-Yong; Zaluski, Wade; Esser, Richard; Matthews, Vince; McPherson, Brian

    2013-07-30T23:59:59.000Z

    The purpose of this report is to provide a summary of individual local-?scale CCS site characterization studies conducted in Colorado, New Mexico and Utah. These site-? specific characterization analyses were performed as part of the Characterization of Most Promising Sequestration Formations in the Rocky Mountain Region (RMCCS) project. The primary objective of these local-?scale analyses is to provide a basis for regional-?scale characterization efforts within each state. Specifically, limits on time and funding will typically inhibit CCS projects from conducting high-? resolution characterization of a state-?sized region, but smaller (< 10,000 km{sup 2}) site analyses are usually possible, and such can provide insight regarding limiting factors for the regional-?scale geology. For the RMCCS project, the outcomes of these local-?scale studies provide a starting point for future local-?scale site characterization efforts in the Rocky Mountain region.

  17. An experimental investigation of certain flat plates loaded in torsion with end restraint

    E-Print Network [OSTI]

    Hamner, Bennett Barron

    1953-01-01T23:59:59.000Z

    and deflections of flat plates loaded in torsion are oonsidered. Plates of width-Chiohess ratios of 8, 10, 12 and 14 and length- width ratios of 1, 2 ~ 4 and 6 are used Theoretical and expsrinental stress and defleotion ourves are plottedi Sartloular... require high struotural solidities. Ls a result a flat plate nay be used to sienlate wing struotural problens ~ 1 Theoretioal solutions ~ ~ for the stresses and defleotions of flat plates with torsional loads ellninate the effeots of end restraint by as...

  18. Distribution of hazardous air pollutant trace elements, total sulfur, and ash in coals from five Tertiary basins in the Rocky Mountain Region

    SciTech Connect (OSTI)

    Ellis, M.S.; Stricker, G.D.; Flores, R.M. [Geological Survey, Denver, CO (United States)

    1994-12-31T23:59:59.000Z

    Arithmetic mean values of the contents of hazardous air pollutant (HAP) trace elements named in the 1990 Clean Air Act Amendments (antimony, arsenic, beryllium, cadmium, chromium, cobalt, lead, manganese, mercury, nickel, selenium, and uranium), ash, and total sulfur were statistically compared on a whole-coal basis for Paleocene coals from five Tertiary basins in the Rocky Mountain Region. The study of proximate and elemental analyses indicate a relationship between trace element contents and paleogeography.

  19. Flat Rock, Michigan: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublicIDAPowerPlantSitingConstruction.pdfNotify98.pdf Jump to:Siting.pdfFiskdale,Five StarFlash Steam

  20. Flat Rock, North Carolina: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublicIDAPowerPlantSitingConstruction.pdfNotify98.pdf Jump to:Siting.pdfFiskdale,Five StarFlash Steam512357°,

  1. Experimental Investigations of Vortex Induced Vibration of A Flat Plate in Pitch Oscillation

    E-Print Network [OSTI]

    Yang, Yi

    2012-02-14T23:59:59.000Z

    A bluff structure placed in a flowing fluid, may be subjected to vortex-induced vibrations (VIV). For a flat plate with only rotational degree of freedom, the VIV is rotational oscillation. Based on the experimental investigation, vortex...

  2. Conformally flat Einstein-Yang-Mills-Higgs solutions with spherical symmetry

    SciTech Connect (OSTI)

    Mondaini, R.P.; Santos, N.O.

    1983-10-15T23:59:59.000Z

    We solve the Einstein-Yang-Mills-Higgs equations in a conformally flat metric with spherical symmetry. Two solutions are obtained corresponding to magnetic monopoles in the Higgs vacuum and outside of it.

  3. Flat Quartz-Crystal X-ray Spectrometer for Nuclear Forensics Applications

    E-Print Network [OSTI]

    Goodsell, Alison

    2012-10-19T23:59:59.000Z

    structure. The higher energy background radiation was blocked from reaching the detector using a customized collimator and shielding system. A flat quartz-crystal x-ray spectrometer system was designed specifically to fit the constraints and requirements...

  4. Methods of improving the surface flatness of thin glass sheets and silicon wafers

    E-Print Network [OSTI]

    Akilian, Mireille

    2008-01-01T23:59:59.000Z

    The manufacturing of high quality sheet glass has allowed for many technologies to advance to astonishing frontiers. With dimensions reaching ~ 3 x 3 m, sheet glass is pushing the envelope for producing massive size flat ...

  5. Seismic fragility and retrofitting for a reinforced concrete flat-slab structure

    E-Print Network [OSTI]

    Bai, Jong-Wha

    2004-09-30T23:59:59.000Z

    The effectiveness of seismic retrofitting applied to enhance seismic performance was assessed for a five-story reinforced concrete (RC) flat-slab building structure in the central United States. In addition to this, an assessment of seismic...

  6. Design of Flat-Plate Dehumidifiers for HumidificationDehumidification Desalination Systems

    E-Print Network [OSTI]

    Sievers, Martin

    Flat-plate heat exchangers are examined for use as dehumidifiers in humidificationdehumidification (HDH) desalination systems. The temperature and humidity ratio differences that drive mass transfer are considerably higher ...

  7. The Inverted Block Rate:The Inverted Block Rate: An Alternative to Flat Rate BillingAn Alternative to Flat Rate Billing

    E-Print Network [OSTI]

    Hughes, Larry

    The Inverted Block Rate:The Inverted Block Rate: An Alternative to Flat Rate BillingAn Alternative;Inverted Block RateInverted Block Rate 22 IntroductionIntroduction ·· Modern societies rely on electrical collectionMetering and Rate Models facilitate collection #12;Inverted Block RateInverted Block Rate 33 Rate

  8. Heat Transfer -2 A heat generating ( ) flat plate fuel element of thickness 2L is covered with flat plate steel cladding of

    E-Print Network [OSTI]

    Virginia Tech

    with flat plate steel cladding of thickness b. The heat generated is removed by a fluid at T, which adjoins on both sides On the sketch show regions where dT/dx is zero, constant and increasing. T , h x LL bb SteelSteel

  9. Social impacts of hazardous and nuclear facilities and events: Implications for Nevada and the Yucca Mountain high-level nuclear waste repository; [Final report

    SciTech Connect (OSTI)

    Freudenburg, W.R. [Wisconsin Univ., Madison, WI (United States); Carter, L.F.; Willard, W. [Washington State Univ., Pullman, WA (United States); Lodwick, D.G. [Miami Univ., Oxford, OH (United States); Hardert, R.A. [Arizona State Univ., Tempe, AZ (United States); Levine, A.G. [State Univ. of New York, Buffalo, NY (United States). Dept. of Sociology; Kroll-Smith, S. [New Orleans Univ., LA (United States); Couch, S.R. [Pennsylvania State Univ., University Park, PA (United States); Edelstein, M.R. [Ramapo College, Mahwah, NJ (United States)

    1992-05-01T23:59:59.000Z

    Social impacts of a nuclear waste repository are described. Various case studies are cited such as Rocky Flats Plant, the Feed Materials Production Center, and Love Canal. The social impacts of toxic contamination, mitigating environmental stigma and loss of trust are also discussed.

  10. No-migration variance petition. Volume 3, Revision 1: Appendix B, Attachments A through D

    SciTech Connect (OSTI)

    Not Available

    1990-03-01T23:59:59.000Z

    Volume III contains the following attachments: TRUPACT-II content codes (TRUCON); TRUPACT-II chemical list; chemical compatibility analysis for Rocky Flats Plant waste forms (Appendix 2.10.12 of TRUPACT-II safety analysis report); and chemical compatibility analyses for waste forms across all sites.

  11. The National Wind Technology Center

    SciTech Connect (OSTI)

    Thresher, R.W.; Hock, S.M. [National Renewable Energy Lab., Golden, CO (United States)] [National Renewable Energy Lab., Golden, CO (United States); Loose, R.R.; Cadogon, J.B.

    1994-07-01T23:59:59.000Z

    Wind energy research began at the Rocky Flats test site in 1976 when Rockwell International subcontracted with the Energy Research and Development Administration (ERDA). The Rocky Flats Plant was competitively selected from a number of ERDA facilities primarily because it experienced high instantaneous winds and provided a large, clear land area. By 1977, several small wind turbines were in place. During the facility`s peak of operation, in 1979-1980, researchers were testing as many as 23 small wind turbines of various configurations, including commercially available machines and prototype turbines developed under subcontract to Rocky Flats. Facilities also included 8-kW, 40-kW, and 225-kW dynamometers; a variable-speed test bed; a wind/hybrid test facility; a controlled velocity test facility (in Pueblo, Colorado); a modal test facility, and a multimegawatt switchgear facility. The main laboratory building was dedicated in July 1981 and was operated by the Rocky Flats Plant until 1984, when the Solar Energy Research Institute (SERI) and Rocky Flats wind energy programs were merged and transferred to SERI. SERI and now the National Renewable Energy Laboratory (NREL) continued to conduct wind turbine system component tests after 1987, when most program personnel were moved to the Denver WEst Office Park in Golden and site ownership was transferred back to Rocky Flats. The Combined Experiment test bed was installed and began operation in 1988, and the NREL structural test facility began operation in 1990. In 1993, the site`s operation was officially transferred to the DOE Golden Field Office that oversees NREL. This move was in anticipation of NREL`s renovation and reoccupation of the facility in 1994.

  12. Stringy Stability of Charged Dilaton Black Holes with Flat Event Horizon

    E-Print Network [OSTI]

    Yen Chin Ong; Pisin Chen

    2014-12-29T23:59:59.000Z

    Electrically charged black holes with flat event horizon in anti-de Sitter space have received much attention due to various applications in Anti-de Sitter/Conformal Field Theory (AdS/CFT) correspondence, from modeling the behavior of quark-gluon plasma to superconductor. Crucial to the physics on the dual field theory is the fact that when embedded in string theory, black holes in the bulk may become vulnerable to instability caused by brane pair-production. Since dilaton arises naturally in the context of string theory, we study the effect of coupling dilaton to Maxwell field on the stability of flat charged AdS black holes. In particular, we study the stability of Gao-Zhang black holes, which are locally asymptotically anti-de Sitter. We find that for dilaton coupling parameter $\\alpha$ > 1, flat black holes are stable against brane pair production, however for 0 electrical charges is increased. Such instability however, behaves somewhat differently from that of flat Reissner-Nordstr\\"om black holes. In addition, we prove that the Seiberg-Witten action of charged dilaton AdS black hole of Gao-Zhang type with flat event horizon (at least in 5-dimension) is always logarithmically divergent at infinity for finite values of $\\alpha$, and is finite and positive in the case $\\alpha$ tends to infinity . We also comment on the robustness of our result for other charged dilaton black holes that are not of Gao-Zhang type.

  13. Regional Operations Research Program for Commercialization of Geothermal Energy in the Rocky Mountain Basin and Range. Final Technical Report, January 1980--March 1981

    SciTech Connect (OSTI)

    None

    1981-07-01T23:59:59.000Z

    This report describes the work accomplished from January 1980 to March 1981 in the Regional Operations Research efforts for the Rocky Mountain Basin and Range Geothermal Commercialization Program. The scope of work is as described in New Mexico State University Proposal 80-20-207. The work included continued data acquisition and extension of the data base, enhancement and refinement of the economic models for electric and direct use applications, site-specific and aggregated analyses in support of the state teams, special analyses in support of several federal agencies, and marketing assistance to the state commercialization teams.

  14. Friction factor data for flat plate tests of smooth and honeycomb surfaces

    E-Print Network [OSTI]

    Ha, Tae Woong

    1989-01-01T23:59:59.000Z

    are needed. The purpose of this report is to present the air flow friction factor data for honeycomb surfaces (i.e., 1.57 mm, 0.79 mm and 0.51 mm in cell width, 3.81 mm and 2.29 mm in cell depth) with a flat plate tester. The flat plate tester is designed....2bar, and 17.9bar, respectively and 3 clearances between honeycombs which are 0.25mm, 0.38mm and 0.51mm. These clearance values are representative of actual seals used in the turbomachinary. The following questions wil l be answered: 1) Does...

  15. THz-radiation production using dispersively-selected flat electron bunches

    E-Print Network [OSTI]

    Thangaraj, Jayakar

    2013-01-01T23:59:59.000Z

    We propose an alternative scheme for a tunable THz radiation source generated by relativistic electron bunches. This technique relies on the combination of dispersive selection and flat electron bunch. The dispersive selection uses a slit mask inside a bunch compressor to transform the energy-chirped electron beam into a bunch train. The flat beam transformation boosts the frequency range of the THz source by reducing the beam emittance in one plane. This technique generates narrow-band THz radiation with a tuning range between 0.2 - 4 THz. Single frequency THz spectrum can also be generated by properly choosing the slit spacing, slit width, and the energy chirp.

  16. Property:OpenEI/UtilityRate/FlatDemandMonth8 | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscotInformation Max Jump to:FlatDemandMonth3 Jump to:FlatDemandMonth8 Jump to:

  17. Property:OpenEI/UtilityRate/FlatDemandMonth9 | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscotInformation Max Jump to:FlatDemandMonth3 Jump to:FlatDemandMonth8 Jump

  18. Induced matter: Curved N-manifolds encapsulated in Riemann-flat N+1 dimensional space

    E-Print Network [OSTI]

    Harry I. Ringermacher; Lawrence R. Mead

    2005-11-02T23:59:59.000Z

    Liko and Wesson have recently introduced a new 5-dimensional induced matter solution of the Einstein equations, a negative curvature Robertson-Walker space embedded in a Riemann flat 5-dimensional manifold. We show that this solution is a special case of a more general theorem prescribing the structure of certain N+1-dimensional Riemann flat spaces which are all solutions of the Einstein equations. These solutions encapsulate N-dimensional curved manifolds. Such spaces are said to "induce matter" in the sub-manifolds by virtue of their geometric structure alone. We prove that the N-manifold can be any maximally symmetric space.

  19. Dynamic pressure response of water flow between closely spaced roughened flat plates

    E-Print Network [OSTI]

    Hess, John Charles

    2012-06-07T23:59:59.000Z

    of MASTER OF SCIENCE May 1993 Major Subject: Mechanical Engineering DYNAMIC PRESSURE RESPONSE OF WATER FLOW BETWEEN CLOSELY SPACED ROUGHENED FLAT PLATES A Thesis by JOHN CHARLES HESS Approved as to style and content by: Robert E. DeOtte, Jr. (Co.... S. , Texas A&M University Co-Chairs of Advisory Committee: Dr. R. E. DeOtte, Jr, Dr. G, L, Morrison A flat plate tester was designed and built to determine friction factors and dynamic pressures for water flow over smooth, knurl, and cavity...

  20. Bagdad Plant

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTie Ltd: Scope ChangeL-01-06Hot-Humid- EngineB2Bagdad Plant 585 Silicon

  1. allochthonous plant contributions: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    mammals, especially where the maples grow more densely in open habitats. In commercial timber operations, shrub fields of Rocky Mountain maple often interfere with seedling...

  2. Assessment Documents | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Flats Closure Project Site - April 2001 Special Review of the Rocky Flats Closure Project Site January 18, 2001 Independent Oversight Focused Safety Management Evaluation, Idaho...

  3. Plant Operational Status - Pantex Plant

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest RegionatSearch Welcome to theNews & Blog »Physics PhysicsWeek »Plant

  4. A SOLAR STILL AUGMENTED WITH A FLAT-PLATE COLLECTOR AND A REFLECTOR

    E-Print Network [OSTI]

    A SOLAR STILL AUGMENTED WITH A FLAT-PLATE COLLECTOR AND A REFLECTOR A. Saleh A. Badran Mechanical ­ Jordan Amman ­ Jordan e-mail: asaleh@philadelphia.edu.jo e-mail: badran@ju.edu.jo ABSTRACT A solar distillation system was built and tested to study the effect of increasing the solar radiation incident

  5. Analysis of Fracture in Cores from the Tuff Confining Unit beneath Yucca Flat, Nevada Test Site

    SciTech Connect (OSTI)

    Lance Prothro

    2008-03-01T23:59:59.000Z

    The role fractures play in the movement of groundwater through zeolitic tuffs that form the tuff confining unit (TCU) beneath Yucca Flat, Nevada Test Site, is poorly known. This is an important uncertainty, because beneath most of Yucca Flat the TCU lies between the sources of radionuclide contaminants produced by historic underground nuclear testing and the regional carbonate aquifer. To gain a better understanding of the role fractures play in the movement of groundwater and radionuclides through the TCU beneath Yucca Flat, a fracture analysis focusing on hydraulic properties was performed on conventional cores from four vertical exploratory holes in Area 7 of Yucca Flat that fully penetrate the TCU. The results of this study indicate that the TCU is poorly fractured. Fracture density for all fractures is 0.27 fractures per vertical meter of core. For open fractures, or those observed to have some aperture, the density is only 0.06 fractures per vertical meter of core. Open fractures are characterized by apertures ranging from 0.1 to 10 millimeter, and averaging 1.1 millimeter. Aperture typically occurs as small isolated openings along the fracture, accounting for only 10 percent of the fracture volume, the rest being completely healed by secondary minerals. Zeolite is the most common secondary mineral occurring in 48 percent of the fractures observed.

  6. Recovering Shape Characteristics on Near-flat Specular Surfaces Yuanyuan Ding and Jingyi Yu

    E-Print Network [OSTI]

    Taufer, Michela

    surfaces have also been directly integrated into Figure 1. Distortions observed on near-flat window surfaces. animations and film footage to reproduce realistic phenom- ena [4]. In this paper, we focus example is the image observed on a window as shown in Figure 1. Although the surface is highly planar

  7. Geometric Control and Differential Flatness of a Quadrotor UAV with a Cable-Suspended Load

    E-Print Network [OSTI]

    Sreenath, Koushil

    is established to be a differentially-flat hybrid system with the load position and the quadrotor yaw serving on the configuration space SE(3)?S2 , is obtained by taking variations on manifolds. The quadrotor-load system, see [9]. However, carrying an external load through a gripper increases the inertia of the system

  8. An evaluation of the thermal characteristics of a flat plate heat pipe spreader

    E-Print Network [OSTI]

    Chesser, Jason Blake

    2000-01-01T23:59:59.000Z

    loss could bc determined. Duc to the axisymmetric nature of the i. echnique, it was necessary to define the effective radial heat pipe dimensions. ln the case of a disk shaped flat heat pipe, the effective radius is equal to the radius of the disk...

  9. A lowstand epikarstic intertidal flat from the middle Silurian of Gotland, Sweden

    E-Print Network [OSTI]

    Calner, Mikael

    A lowstand epikarstic intertidal flat from the middle Silurian of Gotland, Sweden Mikael Calner, Sweden Received 17 August 2000; accepted 29 June 2001 Abstract This paper describes the sedimentology the Klintehamn area on western Gotland (Sweden). The epikarst represents the most distal portion

  10. KINEMATIC CONTROL OF A NONHOLONOMIC WHEELED MOBILE MANIPULATOR A DIFFERENTIAL FLATNESS APPROACH

    E-Print Network [OSTI]

    Krovi, Venkat

    the terminal conditions in the flat output space while control design reduces to a pole-placement problem) electro-mechanical testing. NOMENCLATURE WMR Wheeled Mobile Robot WMM Wheeled Mobile Manipulator ( ),x y Cartesian coordinates of the center of the wheel axle of the WMR Orientation of the WMR with respect

  11. Supercontinuum-based 10-GHz flat-topped optical frequency comb generation

    E-Print Network [OSTI]

    Purdue University

    and Nanoscience Department, Chalmers University of Technology, SE-41296 Göteborg, Sweden * rwu@purdue.edu Abstract-topped optical frequency comb (> 3.64-THz or 28 nm bandwidth with ~365 spectral lines within 3.5-dB power device allows the pulses to enter into the optical wave-breaking regime, thus achieving a smooth flat

  12. Mineralogic Zonation Within the Tuff Confining Unit, Yucca Flat, Nevada Test Site

    SciTech Connect (OSTI)

    Lance Prothro

    2005-09-01T23:59:59.000Z

    Recently acquired mineralogic data from drill hole samples in Yucca Flat show that the tuff confining unit (TCU) can be subdivided into three mineralogic zones based on the relative abundances of primary and secondary mineral assemblages. These zones are (1) an upper zone characterized by the abundance of the zeolite mineral clinoptilolite with lesser amounts of felsic and clay minerals; (2) a middle zone with felsic minerals dominant over clinoptilolite and clay minerals; and (3) a basal argillic zone where clay minerals are dominant over felsic minerals and clinoptilolite. Interpretation of the mineralogic data, along with lithologic, stratigraphic, and geophysical data from approximately 500 drill holes, reveals a three-layer mineralogic model for the TCU that shows all three zones are extensive beneath Yucca Flat. The mineralogic model will be used to subdivide the TCU in the Yucca Flat hydrostratigraphic framework model, resulting in a more accurate and versatile framework model. In addition, the identification of the type, quantity, and distribution of minerals within each TCU layer will permit modelers to better predict the spatial distribution and extent of contaminant transport from underground tests in Yucca Flat, at both the level of the hydrologic source term and the corrective action unit.

  13. Supervised Learning via Discriminative k q-Flats Arthur Szlam and Guillermo Sapiro

    E-Print Network [OSTI]

    Soatto, Stefano

    modify this energy so that it penalizes classification errors. In this note we consider the following-q-flats algorithm for pattern classification is introduced in this work. The ba- sic idea is to replace the original, showing that the method is computa- tionally very efficient and gives excellent results on standard

  14. Interacting polytropic gas model of phantom dark energy in non-flat universe

    E-Print Network [OSTI]

    K. Karami; S. Ghaffari; J. Fehri

    2009-11-25T23:59:59.000Z

    By introducing the polytropic gas model of interacting dark energy, we obtain the equation of state for the polytropic gas energy density in a non-flat universe. We show that for even polytropic index by choosing $K>Ba^{\\frac{3}{n}}$, one can obtain $\\omega^{\\rm eff}_{\\Lambda}<-1$, which corresponds to a universe dominated by phantom dark energy.

  15. A Soft Wearable Robotic Device for Active Knee Motions using Flat Pneumatic Artificial Muscles

    E-Print Network [OSTI]

    Park, Yong-Lae

    elastomer muscles were employed for assisted knee extension and flexion. The robotic device was testedA Soft Wearable Robotic Device for Active Knee Motions using Flat Pneumatic Artificial Muscles Yong present the design of a soft wearable robotic device composed of elastomeric artificial muscle actuators

  16. RIGID FLAT WEBS ON THE PROJECTIVE PLANE DAVID MARIN AND JORGE VITORIO PEREIRA

    E-Print Network [OSTI]

    Pereira, Jorge Vitório

    RIGID FLAT WEBS ON THE PROJECTIVE PLANE DAVID MAR´IN AND JORGE VIT´ORIO PEREIRA Abstract the invitation of CRM at Bellaterra in July 2010. 1 #12;2 DAVID MAR´IN AND JORGE VIT ´ORIO PEREIRA for a generic

  17. Mercury Contamination from Hydraulic Placer-Gold Mining in the Dutch Flat Mining

    E-Print Network [OSTI]

    179 Mercury Contamination from Hydraulic Placer-Gold Mining in the Dutch Flat Mining District, California By Michael P. Hunerlach, James J. Rytuba, and Charles N. Alpers ABSTRACT Mercury contamination mercury (quicksilver) was used extensively for the recovery of gold at both placer and hardrock mines

  18. Comparison of flat cleaved and cylindrical diffusing fibers as treatment sources for interstitial photodynamic therapy

    SciTech Connect (OSTI)

    Baran, Timothy M., E-mail: timothy.baran@rochester.edu; Foster, Thomas H. [Department of Imaging Sciences, University of Rochester, Rochester, New York 14642 (United States)] [Department of Imaging Sciences, University of Rochester, Rochester, New York 14642 (United States)

    2014-02-15T23:59:59.000Z

    Purpose: For interstitial photodynamic therapy (iPDT) of bulky tumors, careful treatment planning is required in order to ensure that a therapeutic dose is delivered to the tumor, while minimizing damage to surrounding normal tissue. In clinical contexts, iPDT has typically been performed with either flat cleaved or cylindrical diffusing optical fibers as light sources. Here, the authors directly compare these two source geometries in terms of the number of fibers and duration of treatment required to deliver a prescribed light dose to a tumor volume. Methods: Treatment planning software for iPDT was developed based on graphics processing unit enhanced Monte Carlo simulations. This software was used to optimize the number of fibers, total energy delivered by each fiber, and the position of individual fibers in order to deliver a target light dose (D{sub 90}) to 90% of the tumor volume. Treatment plans were developed using both flat cleaved and cylindrical diffusing fibers, based on tissue volumes derived from CT data from a head and neck cancer patient. Plans were created for four cases: fixed energy per fiber, fixed number of fibers, and in cases where both or neither of these factors were fixed. Results: When the number of source fibers was fixed at eight, treatment plans based on flat cleaved fibers required each to deliver 71808080 J in order to deposit 90 J/cm{sup 2} in 90% of the tumor volume. For diffusers, each fiber was required to deliver 22702350 J (3331178 J/cm) in order to achieve this same result. For the case of fibers delivering a fixed 900 J, 13 diffusers or 19 flat cleaved fibers at a spacing of 1 cm were required to deliver the desired dose. With energy per fiber fixed at 2400 J and the number of fibers fixed at eight, diffuser fibers delivered the desired dose to 93% of the tumor volume, while flat cleaved fibers delivered this dose to 79%. With both energy and number of fibers allowed to vary, six diffusers delivering 34853600 J were required, compared to ten flat cleaved fibers delivering 27803600 J. Conclusions: For the same number of fibers, cylindrical diffusers allow for a shorter treatment duration compared to flat cleaved fibers. For the same energy delivered per fiber, diffusers allow for the insertion of fewer fibers in order to deliver the same light dose to a target volume.

  19. 878 JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, VOL. 19, NO. 4, AUGUST 2010 A Flat Heat Pipe Architecture Based on

    E-Print Network [OSTI]

    MacDonald, Noel C.

    878 JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, VOL. 19, NO. 4, AUGUST 2010 A Flat Heat Pipe pipe is developed for Thermal Ground Plane (TGP) appli- cations. The Ti-based heat pipe architecture chamber. The scalable heat pipes' flat geometry facilitates contact with planar heat sources

  20. Heat Transfer -1 A satellite in space orbits the sun. The satellite can be approximated as a flat plate with

    E-Print Network [OSTI]

    Virginia Tech

    Heat Transfer - 1 A satellite in space orbits the sun. The satellite can be approximated as a flat plate with dimensions and properties given below. (a) Calculate the solar heat flux (W/m2 is at a distance where the solar heat flux (as defined above) is 500 W/m2 , and the flat plate is oriented

  1. Rocky Mountain's Home page

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest RegionatSearch Welcome toResearchInnovation protecting

  2. About Rocky Mountain Region

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUCProductstwrmrAre the Effects of GlobalASCRAbigailAboutquestions fromAbout

  3. Rocky Mountain Contact Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromisingStories »SubmitterJ. NorbyN.Rocks Rocks Rocks have

  4. Rocky Mountain Customers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromisingStories »SubmitterJ. NorbyN.Rocks Rocks Rocks have RM Home

  5. Management and Labor Relations Techniques of Japanese-Owned Automotive Assembly Plants in the United States

    E-Print Network [OSTI]

    Pitney, Paul

    2005-12-16T23:59:59.000Z

    announced it would build a new assembly plant in Flat Rock, Michigan. In 1985, Mitsubishi announced a joint-venture assembly plant with Chrysler in Normal, Illinois. Subaru and Isuzu selected a site near Lafayette, Indiana for their joint-venture plant...,300 No Subaru-Isuzu Lafayette, IN Dec-86 Sep-89 2,213 No Table 2.1: Locations and Start Dates of Japanese Transplants Sources: The Detroit News (Clanton 2004), American Public Media Marketplace (http://marketplace.publicradio.org/shows/1995/11/30_mpp...

  6. REDUCING RISK IN LOW-PERMEABILITY GAS FORMATIONS: UNDERSTANDING THE ROCK/FLUID CHARACTERISTICS OF ROCKY MOUNTAIN LARAMIDE BASINS

    SciTech Connect (OSTI)

    Ronald C. Surdam

    2003-12-29T23:59:59.000Z

    An anomalous velocity model was constructed for the Wind River Basin (WRB) based on {approx}2000 mi of 2-D seismic data and 175 sonic logs, for a total of 132,000 velocity/depth profiles. Ten cross sections were constructed through the model coincident with known gas fields. In each cross section, an intense, anomalously slow velocity domain coincided with the gas-productive rock/fluid interval. The anomalous velocity model: (1) Easily isolates gas-charged rock/fluid systems characterized by anomalously slow velocities and water-rich rock/fluid systems characterized by normal velocities; and (2) Delineates the regional velocity inversion surface, which is characterized by steepening of the Ro/depth gradient, a significant increase in capillary displacement pressure, a significant change in formation water composition, and acceleration of the reaction rate of smectite-to-illite diagenesis in mixed-layer clays. Gas chimneys are observed as topographic highs on the regional velocity inversion surface. Beneath the surface are significant fluid-flow compartments, which have a gas-charge in the fluid phase and are isolated from meteoric water recharge. Water-rich domains may occur within regional gas-charged compartments, but are not being recharged from the meteoric water system (i.e., trapped water). The WRB is divided into at least two regionally prominent fluid-flow compartments separated by the velocity inversion surface: a water-dominated upper compartment likely under strong meteoric water drive and a gas-charged, anomalously pressured lower compartment. Judging from cross sections, numerous gas-charged subcompartments occur within the regional compartment. Their geometries and boundaries are controlled by faults and low-permeability rocks. Commercial gas production results when a reservoir interval characterized by enhanced porosity/permeability intersects one of these gas-charged subcompartments. The rock/fluid characteristics of the Rocky Mountain Laramide Basins (RMLB) described in this work determine the potential for significant, relatively unconventional, so-called ''basin-center'' hydrocarbon accumulations. If such accumulations occur, they will be characterized by the following critical attributes: (1) Location beneath a regional velocity inversion surface that typically is associated with low-permeability lithologies; (2) Anomalous pressure, both over- and underpressure, and when, less commonly, they appear to be normally pressured, they are not in contact with the meteoric water system; (3) A significant gas component in the regional multiphase fluid-flow system (water-gas-oil) that occurs beneath the regional velocity inversion surface; (4) Domains of intense gas charge (i.e., high gas saturation) within the regional multiphase fluid-flow system; (5) Compartmentalization of the rock/fluid system to a far greater extent beneath the regional velocity inversion surface than above it (i.e., convection of fluids across the regional velocity inversion surface is reduced or eliminated depending on the nature of the capillary properties of the low-permeability rocks associated with the inversion surface); (6) Commercial gas accumulations occurring at the intersection of reservoir intervals characterized by enhanced porosity and permeability and gas-charged domains; (7) Productive intersections of reservoir intervals and gas-charged domains, which are controlled by the structural, stratigraphic, and diagenetic elements affecting the rock/fluid system; and (8) No apparent meteoric water connection with the gas accumulations and gas columns up to several thousand feet in height. Because some of these critical attributes are not associated with conventional hydrocarbon accumulations, a new set of diagnostic tools are required in order to explore for and exploit these types of gas prospects efficiently and effectively. Some of these new diagnostic tools have been discussed in this report; other have been described elsewhere. In order to maximize risk reduction, it is recommended when exploring for these types of gas accu

  7. Waste Treatment Plant Overview

    Office of Environmental Management (EM)

    contracted Bechtel National, Inc., to design and build the world's largest radioactive waste treatment plant. The Waste Treatment and Immobilization Plant (WTP), also known as the...

  8. THE DEACTIVATION DECONTAMINATION & DECOMMISSIONING OF THE PLUTONIUM FINISHING PLANT (PFP) A FORMER PLUTONIUM PROCESSING FACILITY AT DOE HANFORD SITE

    SciTech Connect (OSTI)

    CHARBONEAU, S.L.

    2006-02-01T23:59:59.000Z

    The Plutonium Finishing Plant (PFP) was constructed as part of the Manhattan Project during World War II. The Manhattan Project was developed to usher in the use of nuclear weapons to end the war. The primary mission of the PFP was to provide plutonium used as special nuclear material (SNM) for fabrication of nuclear devices for the war effort. Subsequent to the end of World War II, the PFP's mission expanded to support the Cold War effort through plutonium production during the nuclear arms race and later the processing of fuel grade mixed plutonium-uranium oxide to support DOE's breeder reactor program. In October 1990, at the close of the production mission for PFP, a shutdown order was prepared by the Department of Energy (DOE) in Washington, DC and issued to the Richland DOE field office. Subsequent to the shutdown order, a team from the Defense Nuclear Facilities Safety Board (DNFSB) analyzed the hazards at PFP associated with the continued storage of certain forms of plutonium solutions and solids. The assessment identified many discrete actions that were required to stabilize the different plutonium forms into stable form and repackage the material in high integrity containers. These actions were technically complicated and completed as part of the PFP nuclear material stabilization project between 1995 and early 2005. The completion of the stabilization project was a necessary first step in deactivating PFP. During stabilization, DOE entered into negotiations with the U.S. Environmental Protection Agency (EPA) and the State of Washington and established milestones for the Deactivation and Decommissioning (D&D) of the PFP. The DOE and its contractor, Fluor Hanford (Fluor), have made great progress in deactivating, decontaminating and decommissioning the PFP at the Hanford Site as detailed in this paper. Background information covering the PFP D&D effort includes descriptions of negotiations with the State of Washington concerning consent-order milestones, milestones completed to date, and the vision of bringing PFP to slab-on-grade. Innovative approaches in planning and regulatory strategies, as well new technologies from within the United States and from other countries and field decontamination techniques developed by workforce personnel, such as the ''turkey roaster'' and the ''lazy Susan'' are covered in detail in the paper. Critical information on issues and opportunities during the performance of the work such as concerns regarding the handling and storage of special nuclear material, concerns regarding criticality safety and the impact of SNM de-inventory at PFP are also provided. The continued success of the PFP D&D effort is due to the detailed, yet flexible, approach to planning that applied innovative techniques and tools, involved a team of experienced independent reviewers, and incorporated previous lessons learned at the Hanford site, Rocky Flats, and commercial nuclear D&D projects. Multi-disciplined worker involvement in the planning and the execution of the work has produced a committed workforce that has developed innovative techniques, resulting in safer and more efficient work evolutions.

  9. Air Quality Scoping Study for Sarcobatus Flat, Nevada (EMSI April 2007)

    SciTech Connect (OSTI)

    Johann Engelbrecht, Ilias Kavouras, Dave Campbell, Scott Campbell, Steven Kohl and David Shafer

    2007-04-01T23:59:59.000Z

    The Desert Research Institute (DRI) is performing a scoping study as part of the U.S. Department of Energys Yucca Mountain Environmental Monitoring Systems Initiative (EMSI). The main objective is to obtain baseline air quality information for Yucca Mountain and an area surrounding the Nevada Test Site (NTS). Air quality and meteorological monitoring and sampling equipment housed in a mobile trailer (shelter) is collecting data at seven sites outside the NTS, including Ash Meadows National Wildlife Refuge, Sarcobatus Flat, Beatty, Rachel, Caliente, Pahranagat National Wildlife Refuge, and Crater Flat, and at four sites on the NTS. The trailer is stationed at any one site for approximately eight weeks at a time. Letter reports provide summaries of air quality and meteorological data, on completion of each sites sampling program.

  10. Flat panel display using Ti-Cr-Al-O thin film

    DOE Patents [OSTI]

    Jankowski, Alan F. (Livermore, CA); Schmid, Anthony P. (Solan Beach, CA)

    2002-01-01T23:59:59.000Z

    Thin films of Ti--Cr--Al--O are used as a resistor material. The films are rf sputter deposited from ceramic targets using a reactive working gas mixture of Ar and O.sub.2. Resistivity values from 10.sup.4 to 10.sup.10 Ohm-cm have been measured for Ti--Cr--Al--O film <1 .mu.m thick. The film resistivity can be discretely selected through control of the target composition and the deposition parameters. The application of Ti--Cr--Al--O as a thin film resistor has been found to be thermodynamically stable, unlike other metal-oxide films. The Ti--Cr--Al--O film can be used as a vertical or lateral resistor, for example, as a layer beneath a field emission cathode in a flat panel display; or used to control surface emissivity, for example, as a coating on an insulating material such as vertical wall supports in flat panel displays.

  11. The Nature of Flat-Spectrum Nuclear Radio Emission in Seyfert Galaxies

    E-Print Network [OSTI]

    C. G. Mundell; A. S. Wilson; J. S. Ulvestad; A. L. Roy

    2000-12-11T23:59:59.000Z

    Parsec-scale VLBA imaging of five Seyfert galaxies with flat-spectrum radio nuclei was conducted to determine whether the flat spectrum represents thermal emission from the accretion disk/obscuring torus or nonthermal, synchrotron self-absorbed emission. Four of the five show emission consistent with synchrotron self-absorption, with intrinsic sizes ~0.05-0.2 pc (or 10^4 gravitational radii for a 10^8 Msun black hole for the smallest). In contrast, NGC 4388, which was detected with MERLIN but not the VLBA, shows thermal emission with similar properties to that detected in NGC 1068. It is notable that the two Seyfert galaxies with detected thermal nuclear radio emission both have large X-ray absorbing columns, suggesting that columns in excess of \\~10^{24} cm^{-2} are needed for such disks to be detectable.

  12. Fatigue damage accumulation and property degradation in flat versus cylindrical specimens

    E-Print Network [OSTI]

    Andrews, Kristine Bachtel

    1992-01-01T23:59:59.000Z

    Material E? MPa l. 39E5 (20. 2 msi) 7. 24E3 (1. 05 msi) 6. 89E-11 (1. 0E-8 psi) Ezz MPa 9. 17E3 (1. 33 msi) 7. 24E3 (1. 05 msi) 6. 89E-11 (1. 0E-8 psi) &? 0. 3 0. 2 0. 5 MPB 7. 10E3 (1. 03 msi) 7. 10E3 (1. 03 msi) 6. 89E-11 (1.... OE-8 psi) MPa 7. 10E3 (1. 03 msi) 7. 10E3 (1. 03 msi) 6. 89E-11 (1. OE-8 psi) Grs MPa 7. 10E3 (1. 03 msi) 7. 10E3 (1. 03 msi) 6. 89E-11 (1. 0E-8 psi) 3. 2 Flat Coupons Two analyses were performed on flat coupons using CLASS...

  13. Effects of self-assembled monolayer and PFPE lubricant on wear characteristics of flat silicon tips.

    SciTech Connect (OSTI)

    Kim, H. J.; Jang, C. E.; Kim, D. E.; Kim, Y. K.; Choa, S. H.; Hong, S.; Materials Science Division; Yonsei Univ.; Samsung Adv. Inst. Science and Technology; Seoul National Univ. of Technology

    2009-01-01T23:59:59.000Z

    The effects of self-assembled monolayer (SAM) and perfluoropolyether (PFPE) lubricant on the wear characteristics of flat silicon tips were investigated. The wear test consisted of sliding the silicon tips fabricated on a flat silicon specimen against SAM and PFPE (Z-tetraol) coated silicon (100) wafer. The tips were slid at a low speed for about 15 km under an applied load of 39.2 {micro}N. The wear volume of the tip was obtained by measuring the tip profile using an Atomic Force Microscope (AFM). It was found that the coatings were effective in reducing the wear of the tips by an order of magnitude from 10{sup -6} to 10{sup -7}.

  14. Proceedings of the flat-plate solar array project research forum on photovoltaic metallization systems

    SciTech Connect (OSTI)

    None

    1983-11-15T23:59:59.000Z

    A Photovoltaic Metallization Research Forum, under the sponsorship of the Jet Propulsion Laboratory's Flat-Plate Solar Array Project and the US Department of Energy, was held March 16-18, 1983 at Pine Mountain, Georgia. The Forum consisted of five sessions, covering (1) the current status of metallization systems, (2) system design, (3) thick-film metallization, (4) advanced techniques and (5) future metallization challenges. Twenty-three papers were presented.

  15. The distortion of a uniform flow field due to a finite flat plate

    E-Print Network [OSTI]

    Zull, Lawrence Michael

    1970-01-01T23:59:59.000Z

    Advantages of the Application of the Complete Navier-Stokes Equations Synopsis II ANALYSIS The Physical Model The Mathematical Model Governing Differential Fquations Initial and Boundary Conditions 10 III METHOD OF SOLUTION 19 General Method... INTRODUCTION Pur ose and Sco e The purpose of this study is to apply numerical methods to solve the exact partial differential equations governing viscous fluid flow past a finite flat plate. The flow condition studied is that of time-dependent, two...

  16. Oil springs and flat top anticlines, Carbon County Wyoming: An unusual fold pair

    SciTech Connect (OSTI)

    Blackstone, D.L. Jr. (Univ. of Wyoming, Laramie, WY (United States))

    1994-04-01T23:59:59.000Z

    Oil Springs Anticline, northwest of Medicine Bow, Wyoming, and located at the northeast corner of the Hanna Basin, lies near the junction of the Freezeout Hills Anticline, the Shirley thrust fault and the Flat Top Anticline. The surface fold as defined by the outcrop of the Wall Creek Sandstone Member of the Frontier Formation is disharmonic to deeper structure at the level of the Jurassic Sundance Formation. The fold is wedged between two major folds and is the result of a space problem between larger structural elements. The controlling Flat Top Anticline is an excellent example of a fold controlled by a well constrained fault in the Precambrian crystalline basement. The basement is bowed upward and outward to the northwest in the hanging wall of the Flat Top Anticline. The purpose of this paper is to describe the geologic structure of the Oil Springs and Flat Top anticlines and their relationship to the Freezeout Hills and the Hanna Basin. Commercial production of petroleum and natural gas occurs on the west flank of the Laramie-Cooper Lake Basin as far north as the northeast corner of the Hanna Basin. Stone reviewed the producing formations in the Laramie and eastern Hanna basins and noted that 11 commercial accumulations of petroleum and natural gas are directly related to anticlinal structures. Production derived from the Permian-Pennsylvanian Tensleep Sandstone in this region has a special geologic framework. Fields that produce from the Tensleep Sandstone are well defined anticlines bounded by faults or fault systems, a situation also reported by Biggs and Espach, Blackstone and in the Wyoming Geological Association Symposium. The Tensleep Sandstone reservoirs in these faulted anticlines are in juxtaposition to potential source rocks of either Jurassic or Cretaceous age in the footwalls of the faults. 17 refs., 9 figs., 1 tab.

  17. A determination of the power absorbed by flat disks rotating in a liquid

    E-Print Network [OSTI]

    Massey, John Robert

    1952-01-01T23:59:59.000Z

    A DETERMINATION OF THE POWER ABSORBED BY FLAT DISKS ROTATING IN A LIQUID A Thesis JOHN ROBERT NASSEY Approved as to style and content by Chairman of Committee ~c, Pr. ~ ~a ~- Head of De@'artment of Mechanical Engineering A DETERMINATION... August l952 Ma)or Sub]ectt Mechanical Engineering AC KIOWLEDOWEKT The writer wishes to express appreciation for advice and enoouragement reoeived during the preparation of this thesis from Professors E, S. Holdredge and R. M. Wlngren, TABLF. OF CO...

  18. Exact solutions to Elko spinors in spatially flat Friedmann-Robertson-Walker spacetimes

    E-Print Network [OSTI]

    J. M. Hoff da Silva; S. H. Pereira

    2014-03-06T23:59:59.000Z

    In this paper we present exact solutions to the so-called Elko spinors for three models of expanding universe, namely the de Sitter, linear and the radiation type evolution. The study was restrict to flat, homogeneous and isotropic Friedmann-Robertson-Walker backgrounds. Starting with an Elko spinor we present the solutions for these cases and compared to the case of Dirac spinors. Besides, an attempt to use Elko spinors as a dark energy candidate in the cosmological context is investigated.

  19. Property:OpenEI/UtilityRate/FlatDemandMonth4 | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscotInformation Max Jump to:FlatDemandMonth3 Jump to: navigation, search This

  20. Property:OpenEI/UtilityRate/FlatDemandMonth5 | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscotInformation Max Jump to:FlatDemandMonth3 Jump to: navigation, search

  1. Property:OpenEI/UtilityRate/FlatDemandMonth6 | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscotInformation Max Jump to:FlatDemandMonth3 Jump to: navigation,

  2. Property:OpenEI/UtilityRate/FlatDemandMonth7 | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscotInformation Max Jump to:FlatDemandMonth3 Jump to:

  3. SIMULATION MODEL ANALYSIS OF THE MOST PROMISING GEOLOGIC SEQUESTRATION FORMATION CANDIDATES IN THE ROCKY MOUNTAIN REGION, USA, WITH FOCUS ON UNCERTAINTY ASSESSMENT

    SciTech Connect (OSTI)

    Lee, Si-Yong; Zaluski, Wade; Will, Robert; Eisinger, Chris; Matthews, Vince; McPherson, Brian

    2013-09-01T23:59:59.000Z

    The purpose of this report is to report results of reservoir model simulation analyses for forecasting subsurface CO2 storage capacity estimation for the most promising formations in the Rocky Mountain region of the USA. A particular emphasis of this project was to assess uncertainty of the simulation-based forecasts. Results illustrate how local-scale data, including well information, number of wells, and location of wells, affect storage capacity estimates and what degree of well density (number of wells over a fixed area) may be required to estimate capacity within a specified degree of confidence. A major outcome of this work was development of a new workflow of simulation analysis, accommodating the addition of random pseudo wells to represent virtual characterization wells.

  4. The variability properties of X-ray steep and X-ray flat quasars

    E-Print Network [OSTI]

    Fabrizio Fiore; Ari Laor; Martin Elvis; Fabrizio Nicastro; Emanuele Giallongo

    1998-03-20T23:59:59.000Z

    We have studied the variability of 6 low redshift, radio quiet `PG' quasars on three timescales (days, weeks, and months) using the ROSAT HRI. The quasars were chosen to lie at the two extreme ends of the ROSAT PSPC spectral index distribution and hence of the H$\\beta$ FWHM distribution. The observation strategy has been carefully designed to provide even sampling on these three basic timescales and to provide a uniform sampling among the quasars We have found clear evidence that the X-ray steep, narrow H_beta, quasars systematically show larger amplitude variations than the X-ray flat broad H_beta quasars on timescales from 2 days to 20 days. On longer timescales we do not find significant differences between steep and flat quasars, although the statistics are poorer. We suggest that the above correlation between variability properties and spectral steepness can be explained in a scenario in which the X-ray steep, narrow line objects are in a higher L/L_Edd state with respect to the X-ray flat, broad line objects. We evaluated the power spectrum of PG1440+356 (the brigthest quasar in our sample) between 2E-7 and 1E-3 Hz, where it goes into the noise. The power spectrum is roughly consistent with a 1/f law between 1E-3 and 2E-6 Hz. Below this frequency it flattens significantly.

  5. Detailed Geophysical Fault Characterization in Yucca Flat, Nevada Test Site, Nevada

    SciTech Connect (OSTI)

    Theodore H. Asch; Donald Sweetkind; Bethany L. Burton; Erin L. Wallin

    2009-02-10T23:59:59.000Z

    Yucca Flat is a topographic and structural basin in the northeastern part of the Nevada Test Site (NTS) in Nye County, Nevada. Between the years 1951 and 1992, 659 underground nuclear tests took place in Yucca Flat; most were conducted in large, vertical excavations that penetrated alluvium and the underlying Cenozoic volcanic rocks. Radioactive and other potential chemical contaminants at the NTS are the subject of a long-term program of investigation and remediation by the U.S. Department of Energy (DOE), National Nuclear Security Administration, Nevada Site Office, under its Environmental Restoration Program. As part of the program, the DOE seeks to assess the extent of contamination and to evaluate the potential risks to humans and the environment from byproducts of weapons testing. To accomplish this objective, the DOE Environmental Restoration Program is constructing and calibrating a ground-water flow model to predict hydrologic flow in Yucca Flat as part of an effort to quantify the subsurface hydrology of the Nevada Test Site. A necessary part of calibrating and evaluating a model of the flow system is an understanding of the location and characteristics of faults that may influence ground-water flow. In addition, knowledge of fault-zone architecture and physical properties is a fundamental component of the containment of the contamination from underground nuclear tests, should such testing ever resume at the Nevada Test Site. The goal of the present investigation is to develop a detailed understanding of the geometry and physical properties of fault zones in Yucca Flat. This study was designed to investigate faults in greater detail and to characterize fault geometry, the presence of fault splays, and the fault-zone width. Integrated geological and geophysical studies have been designed and implemented to work toward this goal. This report describes the geophysical surveys conducted near two drill holes in Yucca Flat, the data analyses performed, and the integrated interpretations developed from the suite of geophysical methodologies utilized in this investigation. Data collection for this activity started in the spring of 2005 and continued into 2006. A suite of electrical geophysical surveys were run in combination with ground magnetic surveys; these surveys resulted in high-resolution subsurface data that portray subsurface fault geometry at the two sites and have identified structures not readily apparent from surface geologic mapping, potential field geophysical data, or surface effects fracture maps.

  6. A quasi-3D analysis of the thermal performance of a flat heat pipe G. Carbajal a,*, C.B. Sobhan b

    E-Print Network [OSTI]

    Wadley, Haydn

    A quasi-3D analysis of the thermal performance of a flat heat pipe G. Carbajal a,*, C.B. Sobhan b form 29 January 2007 Available online 8 May 2007 Abstract The thermal performance of a flat heat pipe. The transient temperature distribution on a solid aluminum plate was compared with the flat heat pipe results

  7. NUCLEAR PLANT OPERATIONS AND

    E-Print Network [OSTI]

    Pzsit, Imre

    NUCLEAR PLANT OPERATIONS AND CONTROL KEYWORDS: neutron flux, cur- rent noise, vibration diagnostics: Swedish Nuclear Powe

  8. Ethylene insensitive plants

    SciTech Connect (OSTI)

    Ecker, Joseph R. (Carlsbad, CA); Nehring, Ramlah (La Jolla, CA); McGrath, Robert B. (Philadelphia, PA)

    2007-05-22T23:59:59.000Z

    Nucleic acid and polypeptide sequences are described which relate to an EIN6 gene, a gene involved in the plant ethylene response. Plant transformation vectors and transgenic plants are described which display an altered ethylene-dependent phenotype due to altered expression of EIN6 in transformed plants.

  9. External Peer Review Team Report Underground Testing Area Subproject for Frenchman Flat, Revision 1

    SciTech Connect (OSTI)

    Sam Marutzky

    2010-09-01T23:59:59.000Z

    An external peer review was conducted to review the groundwater models used in the corrective action investigation stage of the Underground Test Area (UGTA) subproject to forecast zones of potential contamination in 1,000 years for the Frenchman Flat area. The goal of the external peer review was to provide technical evaluation of the studies and to assist in assessing the readiness of the UGTA subproject to progress to monitoring activities for further model evaluation. The external peer review team consisted of six independent technical experts with expertise in geology, hydrogeology,'''groundwater modeling, and radiochemistry. The peer review team was tasked with addressing the following questions: 1. Are the modeling approaches, assumptions, and model results for Frenchman Flat consistent with the use of modeling studies as a decision tool for resolution of environmental and regulatory requirements? 2. Do the modeling results adequately account for uncertainty in models of flow and transport in the Frenchman Flat hydrological setting? a. Are the models of sufficient scale/resolution to adequately predict contaminant transport in the Frenchman Flat setting? b. Have all key processes been included in the model? c. Are the methods used to forecast contaminant boundaries from the transport modeling studies reasonable and appropriate? d. Are the assessments of uncertainty technically sound and consistent with state-of-the-art approaches currently used in the hydrological sciences? 3. Are the datasets and modeling results adequate for a transition to Corrective Action Unit monitoring studiesthe next stage in the UGTA strategy for Frenchman Flat? The peer review team is of the opinion that, with some limitations, the modeling approaches, assumptions, and model results are consistent with the use of modeling studies for resolution of environmental and regulatory requirements. The peer review team further finds that the modeling studies have accounted for uncertainty in models of flow and transport in the Frenchman Flat except for a few deficiencies described in the report. Finally, the peer review team concludes that the UGTA subproject has explored a wide range of variations in assumptions, methods, and data, and should proceed to the next stage with an emphasis on monitoring studies. The corrective action strategy, as described in the Federal Facility Agreement and Consent Order, states that the groundwater flow and transport models for each corrective action unit will consider, at a minimum, the following: Alternative hydrostratigraphic framework models of the modeling domain. Uncertainty in the radiological and hydrological source terms. Alternative models of recharge. Alternative boundary conditions and groundwater flows. Multiple permissive sets of calibrated flow models. Probabilistic simulations of transport using plausible sets of alternative framework and recharge models, and boundary and groundwater flows from calibrated flow models. Ensembles of forecasts of contaminant boundaries. Sensitivity and uncertainty analyses of model outputs. The peer review team finds that these minimum requirements have been met. While the groundwater modeling and uncertainty analyses have been quite detailed, the peer review team has identified several modeling-related issues that should be addressed in the next phase of the corrective action activities: Evaluating and using water-level gradients from the pilot wells at the Area 5 Radioactive Waste Management Site in model calibration. Re-evaluating the use of geochemical age-dating data to constrain model calibrations. Developing water budgets for the alluvial and upper volcanic aquifer systems in Frenchman Flat. Considering modeling approaches in which calculated groundwater flow directions near the water table are not predetermined by model boundary conditions and areas of recharge, all of which are very uncertain. Evaluating local-scale variations in hydraulic conductivity on the calculated contaminant boundaries. Evaluat

  10. Plant fatty acid hydroxylases

    DOE Patents [OSTI]

    Somerville, Chris (Portola Valley, CA); Broun, Pierre (Burlingame, CA); van de Loo, Frank (Lexington, KY)

    2001-01-01T23:59:59.000Z

    This invention relates to plant fatty acyl hydroxylases. Methods to use conserved amino acid or nucleotide sequences to obtain plant fatty acyl hydroxylases are described. Also described is the use of cDNA clones encoding a plant hydroxylase to produce a family of hydroxylated fatty acids in transgenic plants. In addition, the use of genes encoding fatty acid hydroxylases or desaturases to alter the level of lipid fatty acid unsaturation in transgenic plants is described.

  11. Numerical Study of Convective Heat Transfer in Flat Tube Heat Exchangers Operating in Self-Sustained Oscillatory Flow Regimes

    E-Print Network [OSTI]

    Fullerton, Tracy

    2012-02-14T23:59:59.000Z

    Laminar, two-dimensional, constant-property numerical simulations of flat tube heat exchanger devices operating in flow regimes in which self-sustained oscillations occur were performed. The unsteady flow regimes were transition flow regimes...

  12. A comparison of workstation dimensions and body postures between 17" CRT, 21" CRT, and 19" flat panel monitors

    E-Print Network [OSTI]

    Walline, Erin Kurusz

    2012-06-07T23:59:59.000Z

    Use of visual display terminals has been implicated as a risk factor in visual discomfort. With the progression of new technology, larger CRT monitors and alternate display technologies, such as flat panels, are entering the office environment. Few...

  13. A Flat Histogram Method for Computing the Density of States of Combinatorial Stefano Ermon, Carla Gomes, Bart Selman

    E-Print Network [OSTI]

    Keinan, Alon

    A Flat Histogram Method for Computing the Density of States of Combinatorial Problems Stefano Ermon of both SAT, MAX- SAT and model counting. We propose a novel Markov Chain Monte Carlo al- gorithm

  14. Review of solar thermoelectric energy conversion and analysis of a two cover flat-plate solar collector

    E-Print Network [OSTI]

    Hasan, Atiya

    2007-01-01T23:59:59.000Z

    The process of solar thermoelectric energy conversion was explored through a review of thermoelectric energy generation and solar collectors. Existing forms of flat plate collectors and solar concentrators were surveyed. ...

  15. Adsorption of branched and dendritic polymers onto flat surfaces: A Monte Carlo study

    SciTech Connect (OSTI)

    Sommer, J.-U. [Leibniz Institute of Polymer Research Dresden e. V., 01069 Dresden (Germany) [Leibniz Institute of Polymer Research Dresden e. V., 01069 Dresden (Germany); Institute for Theoretical Physics, Technische Universitt Dresden, 01069 Dresden (Germany); K?os, J. S. [Leibniz Institute of Polymer Research Dresden e. V., 01069 Dresden (Germany) [Leibniz Institute of Polymer Research Dresden e. V., 01069 Dresden (Germany); Faculty of Physics, A. Mickiewicz University, Umultowska 85, 61-614 Pozna? (Poland); Mironova, O. N. [Leibniz Institute of Polymer Research Dresden e. V., 01069 Dresden (Germany)] [Leibniz Institute of Polymer Research Dresden e. V., 01069 Dresden (Germany)

    2013-12-28T23:59:59.000Z

    Using Monte Carlo simulations based on the bond fluctuation model we study the adsorption of starburst dendrimers with flexible spacers onto a flat surface. The calculations are performed for various generation number G and spacer length S in a wide range of the reduced temperature ? as the measure of the interaction strength between the monomers and the surface. Our simulations indicate a two-step adsorption scenario. Below the critical point of adsorption, ?{sub c}, a weakly adsorbed state of the dendrimer is found. Here, the dendrimer retains its shape but sticks to the surface by adsorbed spacers. By lowering the temperature below a spacer-length dependent value, ?*(S) < ?{sub c}, a step-like transition into a strongly adsorbed state takes place. In the flatly adsorbed state the shape of the dendrimer is well described by a mean field model of a dendrimer in two dimensions. We also performed simulations of star-polymers which display a simple crossover-behavior in full analogy to linear chains. By analyzing the order parameter of the adsorption transition, we determine the critical point of adsorption of the dendrimers which is located close to the critical point of adsorption for star-polymers. While the order parameter for the adsorbed spacers displays a critical crossover scaling, the overall order parameter, which combines both critical and discontinuous transition effects, does not display simple scaling. The step-like transition from the weak into the strong adsorbed regime is confirmed by analyzing the shape-anisotropy of the dendrimers. We present a mean-field model based on the concept of spacer adsorption which predicts a discontinuous transition of dendrimers due to an excluded volume barrier. The latter results from an increased density of the dendrimer in the flatly adsorbed state which has to be overcome before this state is thermodynamically stable.

  16. Exact formulas for random growth with half-flat initial data

    E-Print Network [OSTI]

    Janosch Ortmann; Jeremy Quastel; Daniel Remenik

    2015-01-20T23:59:59.000Z

    We obtain exact formulas for moments and generating functions of the height function of the asymmetric simple exclusion process at one spatial point, starting from special initial data in which every positive even site is initially occupied. These complement earlier formulas of E. Lee [Lee10] but, unlike those formulas, ours are suitable in principle for asymptotics. We also explain how our formulas are related to divergent series formulas for half-flat KPZ of Le Doussal and Calabrese [LDC12], which we also recover using the methods of this paper. In the long time limit, formal asymptotics show that the fluctuations are given by the Airy$_{2\\to1}$ marginals.

  17. Stability of Non-asymptotically flat thin-shell wormholes in generalized dilaton-axion gravity

    E-Print Network [OSTI]

    Ayan Banerjee; Farook Rahaman; Surajit Chattopadhyay; Sumita Banerjee

    2013-04-11T23:59:59.000Z

    We construct a new type of thin-shell wormhole for non-asymptotically flat charged black holes in generalized dilaton-axion gravity inspired by low-energy string theory using cut-and-paste technique. We have shown that this thin shell wormhole is stable. The most striking feature of our model is that the total amount of exotic matter needed to support the wormhole can be reduced as desired with the suitable choice of the value of a parameter. Various other aspects of thin-shell wormhole are also analyzed.

  18. Surficial Geology and Landscape Development in Northern Frenchman Flat, Interim Summary and Soil Data

    SciTech Connect (OSTI)

    Raytheon Services Nevada Environmental Restoration and Waste Management Division

    1995-09-01T23:59:59.000Z

    This report summarizes geologic studies by Raytheon Services Nevada near the Area 5 Radioactive Waste Management Site at the Nevada Test Site. These studies are part of a program to satisfy data needs of (1) the Greater Confinement Disposal (GCD) Program Performance Assessment (PA), (2) the low-level waste (LLW) PA, and (3) the Resource Conservation and Recovery Act (RCRA) permit application. The geologic studies were integrated into a single program that worked toward a landscape evolution model of northern Frenchman Flat, with more detailed geologic studies of particular topics as needed. Only the Holocene tectonism and surficial geology components of the landscape model are presented in this report.

  19. A quantum weak energy inequality for the Dirac field in two-dimensional flat spacetime

    E-Print Network [OSTI]

    S. P. Dawson

    2005-12-14T23:59:59.000Z

    Fewster and Mistry have given an explicit, non-optimal quantum weak energy inequality that constrains the smeared energy density of Dirac fields in Minkowski spacetime. Here, their argument is adapted to the case of flat, two-dimensional spacetime. The non-optimal bound thereby obtained has the same order of magnitude, in the limit of zero mass, as the optimal bound of Vollick. In contrast with Vollick's bound, the bound presented here holds for all (non-negative) values of the field mass.

  20. 2-M Probe At Gabbs Alkali Flat Area (Kratt, Et Al., 2008) | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpenWende NewSowitec doWinvest HomeInformation Gabbs Alkali Flat

  1. Property:OpenEI/UtilityRate/FlatDemandMonth3 | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscotInformation Max Jump to:FlatDemandMonth3 Jump to: navigation, search This is

  2. Technology Data for Energy Plants June 2010

    E-Print Network [OSTI]

    ............................................................................................... 79 13 Centralised Biogas Plants

  3. Plant Phenotype Characterization System

    SciTech Connect (OSTI)

    Daniel W McDonald; Ronald B Michaels

    2005-09-09T23:59:59.000Z

    This report is the final scientific report for the DOE Inventions and Innovations Project: Plant Phenotype Characterization System, DE-FG36-04GO14334. The period of performance was September 30, 2004 through July 15, 2005. The project objective is to demonstrate the viability of a new scientific instrument concept for the study of plant root systems. The root systems of plants are thought to be important in plant yield and thus important to DOE goals in renewable energy sources. The scientific study and understanding of plant root systems is hampered by the difficulty in observing root activity and the inadequacy of existing root study instrumentation options. We have demonstrated a high throughput, non-invasive, high resolution technique for visualizing plant root systems in-situ. Our approach is based upon low-energy x-ray radiography and the use of containers and substrates (artificial soil) which are virtually transparent to x-rays. The system allows us to germinate and grow plant specimens in our containers and substrates and to generate x-ray images of the developing root system over time. The same plant can be imaged at different times in its development. The system can be used for root studies in plant physiology, plant morphology, plant breeding, plant functional genomics and plant genotype screening.

  4. Plant centromere compositions

    DOE Patents [OSTI]

    Mach, Jennifer M. (Chicago, IL); Zieler, Helge (Del Mar, CA); Jin, RongGuan (Chesterfield, MO); Keith, Kevin (Three Forks, MT); Copenhaver, Gregory P. (Chapel Hill, NC); Preuss, Daphne (Chicago, IL)

    2011-08-02T23:59:59.000Z

    The present invention provides for the nucleic acid sequences of plant centromeres. This will permit construction of stably inherited recombinant DNA constructs and minichromosomes which can serve as vectors for the construction of transgenic plant and animal cells.

  5. Plant centromere compositions

    DOE Patents [OSTI]

    Mach, Jennifer (Chicago, IL); Zieler, Helge (Chicago, IL); Jin, RongGuan (Chicago, IL); Keith, Kevin (Chicago, IL); Copenhaver, Gregory (Chapel Hill, NC); Preuss, Daphne (Chicago, IL)

    2007-06-05T23:59:59.000Z

    The present invention provides for the nucleic acid sequences of plant centromeres. This will permit construction of stably inherited recombinant DNA constructs and minichromosomes which can serve as vectors for the construction of transgenic plant and animal cells.

  6. Plant centromere compositions

    DOE Patents [OSTI]

    Keith, Kevin; Copenhaver, Gregory; Preuss, Daphne

    2006-10-10T23:59:59.000Z

    The present invention provides for the nucleic acid sequences of plant centromeres. This will permit construction of stably inherited recombinant DNA constructs and minichromosomes which can serve as vectors for the construction of transgenic plant and animal cells.

  7. Plant centromere compositions

    DOE Patents [OSTI]

    Mach, Jennifer (Chicago, IL); Zieler, Helge (Chicago, IL); Jin, James (Chicago, IL); Keith, Kevin (Chicago, IL); Copenhaver, Gregory (Chapel Hill, NC); Preuss, Daphne (Chicago, IL)

    2006-06-26T23:59:59.000Z

    The present invention provides for the nucleic acid sequences of plant centromeres. This will permit construction of stably inherited recombinant DNA constructs and minichromosomes which can serve as vectors for the construction of transgenic plant and animal cells.

  8. Plant centromere compositions

    DOE Patents [OSTI]

    Mach; Jennifer M. (Chicago, IL), Zieler; Helge (Del Mar, CA), Jin; RongGuan (Chesterfield, MO), Keith; Kevin (Three Forks, MT), Copenhaver; Gregory P. (Chapel Hill, NC), Preuss; Daphne (Chicago, IL)

    2011-11-22T23:59:59.000Z

    The present invention provides for the nucleic acid sequences of plant centromeres. This will permit construction of stably inherited recombinant DNA constructs and minichromosomes which can serve as vectors for the construction of transgenic plant and animal cells.

  9. Poisonous Plant Management.

    E-Print Network [OSTI]

    McGinty, Allan

    1985-01-01T23:59:59.000Z

    . Carefully examine plants being grazed. Generally, a Significant quantity of toxic plant must be consumed to be lethaL Many times these plants are readily identified in the field by evidence of grazing. Also helpful at this time is a rumen sample... poisonous plants were most severe at heavy stocking rates, while few losses occurred at light stocking levels. Death ? losses were also directly related to kinds or combinations of livestock being grazed. When combinations of cattle, sheep and goats...

  10. A flat-cathode thermionic injector for the PHERMEX Radiographic Facility

    SciTech Connect (OSTI)

    Kauppila, T.; Builta, L.; Burns, M.; Gregory, W.; Honaberger, D.; Watson, S. (Los Alamos National Lab., NM (United States)); Hughes, T. (Mission Research Corp., Albuquerque, NM (United States))

    1993-01-01T23:59:59.000Z

    The PHERMEX (Pulsed High-Energy Radiographic Machine Emitting X-rays) standing-wave linear accelerator is a high-current electron beam generator used for flash-radiography. An improved electron gun has been designed employing a flat-thermionic cathode to replace the existing Pierce-geometry gun. The flat cathode yields increased current with the same applied voltage and cathode area as the Pierce gun. The ISIS code simulations indicate a beam current of 1.5 kA at 600 kV. The new geometry also reduces the probability for high voltage breakdown in the A-K gap. A reentrant magnet captures the expanding electron beam and a bucking coil nulls cathode-tinge field. A third coil is used to optimize the extraction field profile and reduce the effect of nonlinear space charge on the beam emittance. Time-resolved measurements of beam current and voltage have been made. In addition, a streak camera was used to measure beam emittance and spatial profile. Comparisons of measurements with simulations are presented.

  11. A flat-cathode thermionic injector for the PHERMEX Radiographic Facility

    SciTech Connect (OSTI)

    Kauppila, T.; Builta, L.; Burns, M.; Gregory, W.; Honaberger, D.; Watson, S. [Los Alamos National Lab., NM (United States); Hughes, T. [Mission Research Corp., Albuquerque, NM (United States)

    1993-06-01T23:59:59.000Z

    The PHERMEX (Pulsed High-Energy Radiographic Machine Emitting X-rays) standing-wave linear accelerator is a high-current electron beam generator used for flash-radiography. An improved electron gun has been designed employing a flat-thermionic cathode to replace the existing Pierce-geometry gun. The flat cathode yields increased current with the same applied voltage and cathode area as the Pierce gun. The ISIS code simulations indicate a beam current of 1.5 kA at 600 kV. The new geometry also reduces the probability for high voltage breakdown in the A-K gap. A reentrant magnet captures the expanding electron beam and a bucking coil nulls cathode-tinge field. A third coil is used to optimize the extraction field profile and reduce the effect of nonlinear space charge on the beam emittance. Time-resolved measurements of beam current and voltage have been made. In addition, a streak camera was used to measure beam emittance and spatial profile. Comparisons of measurements with simulations are presented.

  12. Environmental Assessment for the LGF Spill Test Facility at Frenchman Flat, Nevada Test Site

    SciTech Connect (OSTI)

    Patton, S.E.; Novo, M.G.; Shinn, J.H.

    1986-04-01T23:59:59.000Z

    The LGF Spill Test Facility at Frenchman Flat, Nevada Test Site, is being constructed by the United States Department of Energy (DOE). In this Environmental Assessment, environmental consequences of spilling hazardous materials in the Frenchman Flat basin are evaluated and mitigations and recommendations are stated in order to protect natural resources and reduce land-use impacts. Guidelines and restrictions concerning spill-test procedures will be determined by the LGF Test Facility Operations Manager and DOE based on toxicity documentation for the test material, provided by the user, and mitigations imposed by the Environmental Assessment. In addition to Spill Test Facility operational procedures, certain assumptions have been made in preparation of this document: no materials will be considered for testing that have cumulative, long-term persistence in the environment; spill tests will consist of releases of 15 min or less; and sufficient time will be allowed between tests for recovery of natural resources. Geographic limits to downwind concentrations of spill materials were primarily determined from meteorological data, human occupational exposure standards to hazardous materials and previous spill tests. These limits were established using maximum spill scenarios and environmental impacts are discussed as worst case scenarios; however, spill-test series will begin with smaller spills, gradually increasing in size after the impacts of the initial tests have been evaluated.

  13. Measurements of Conversion Efficiency for a Flat Plate Thermophotovoltaic System Using a Photonic Cavity Test System

    SciTech Connect (OSTI)

    E.J. Brown; C.T. Ballinger; S.R. Burger; G.W. Charache; L.R. Danielson; D.M. DePoy; T.J. Donovan; M. LoCascio

    2000-05-30T23:59:59.000Z

    The performance of a 1 cm{sup 2} thermophotovoltaic (TPV) module was recently measured in a photonic cavity test system. A conversion efficiency of 11.7% was measured at a radiator temperature of 1076 C and a module temperature of 29.9 C. This experiment achieved the highest direct measurement of efficiency for an integrated TPV system. Efficiency was calculated from the ratio of the peak (load matched) electrical power output and the heat absorption rate. Measurements of these two parameters were made simultaneously to assure the validity of the measured efficiency value. This test was conducted in a photonic cavity which mimicked a typical flat-plate TPV system. The radiator was a large, flat graphite surface. The module was affixed to the top of a copper pedestal for heat absorption measurements. The heat absorption rate was proportional to the axial temperature gradient in the pedestal under steady-state conditions. The test was run in a vacuum to eliminate conductive and convective heat transfer mechanisms. The photonic cavity provides the optimal test environment for TPV efficiency measurements because it incorporates all important physical phenomena found in an integrated TPV system: high radiator emissivity and blackbody spectral shape, photon recycling, Lambertian distribution of incident radiation and complex geometric effects. Furthermore, the large aspect ratio between radiating surface area and radiator/module spacing produces a view factor approaching unity with minimal photon leakage.

  14. Preliminary Measurements From A New Flat Plate Facility For Aerodynamic Research

    SciTech Connect (OSTI)

    D. M. McEligot; D. W. Nigg; E. J. Walsh; D. Hernon; M.R.D. Davies

    2005-03-01T23:59:59.000Z

    This paper details the design and preliminary measurements used in the characterisation of a new flat plate research facility. The facility is designed specifically to aid in the understanding of entropy generation throughout the boundary layer with special attention given to non-equilibrium flows. Hot-wire measurements were obtained downstream of two turbulence generating grids. The turbulence intensity, integral and dissipation length scale ranges measured are 1.6%-7%, 5mm-17mm and 0.7mm-7mm, respectively. These values compared well to existing correlations. The flow downstream of both grids was found to be homogenous and isotropic. Flow visualisation is employed to determine aerodynamic parameters such as flow 2-dimensionality and the effect of the flap angle on preventing separation at the leading edge. The flow was found to be 2-dimensional over all measurement planes. The non-dimensional pressure distribution of a modern turbine blade suction surface is simulated on the flat plate through the use of a variable upper wall. The Reynolds number range based on wetted plate length and inlet velocity is 70,000-4,000,000.

  15. The Identification of EGRET Sources with Flat-Spectrum Radio Sources

    E-Print Network [OSTI]

    J. R. Mattox; J. Schachter; L. Molnar; R. C. Hartman; A. R. Patnaik

    1996-12-18T23:59:59.000Z

    We present a method to assess the reliability of the identification of EGRET sources with extragalactic radio sources. We verify that EGRET is detecting the blazar class of AGN. However, many published identifications are found to be questionable. We provide a table of 42 blazars which we expect to be robust identifications of EGRET sources. This includes one previously unidentified EGRET source, the lensed AGN PKS 1830-210 near the direction of the Galactic center. We provide the best available positions for 16 more radio sources which are also potential identifications for previously unidentified EGRET sources. All high Galactic latitude EGRET sources (b>3 degrees) which demonstrate significant variability can be identified with flat spectrum radio sources. This suggests that EGRET is not detecting any type of AGN other than blazars. This identification method has been used to establish with 99.998% confidence that the peak gamma-ray flux of a blazar is correlated with its average 5 GHz radio flux. An even better correlation is seen between gamma-ray flux and the 2.29 GHz flux density measured with VLBI at the base of the radio jet. Also, using high confidence identifications, we find that the radio sources identified with EGRET sources have larger correlated VLBI flux densities than the parent population of flat radio spectrum sources.

  16. Modeling Approach/Strategy for Corrective Action Unit 97, Yucca Flat and Climax Mine , Revision 0

    SciTech Connect (OSTI)

    Janet Willie

    2003-08-01T23:59:59.000Z

    The objectives of the UGTA corrective action strategy are to predict the location of the contaminant boundary for each CAU, develop and implement a corrective action, and close each CAU. The process for achieving this strategy includes modeling to define the maximum extent of contaminant transport within a specified time frame. Modeling is a method of forecasting how the hydrogeologic system, including the underground test cavities, will behave over time with the goal of assessing the migration of radionuclides away from the cavities and chimneys. Use of flow and transport models to achieve the objectives of the corrective action strategy is specified in the FFACO. In the Yucca Flat/Climax Mine system, radionuclide migration will be governed by releases from the cavities and chimneys, and transport in alluvial aquifers, fractured and partially fractured volcanic rock aquifers and aquitards, the carbonate aquifers, and in intrusive units. Additional complexity is associated with multiple faults in Yucca Flat and the need to consider reactive transport mechanisms that both reduce and enhance the mobility of radionuclides. A summary of the data and information that form the technical basis for the model is provided in this document.

  17. Plant design: Integrating Plant and Equipment Models

    SciTech Connect (OSTI)

    Sloan, David (Alstrom Power); Fiveland, Woody (Alstrom Power); Zitney, S.E.; Osawe, Maxwell (Ansys, Inc.)

    2007-08-01T23:59:59.000Z

    Like power plant engineers, process plant engineers must design generating units to operate efficiently, cleanly, and profitably despite fluctuating costs for raw materials and fuels. To do so, they increasingly create virtual plants to enable evaluation of design concepts without the expense of building pilot-scale or demonstration facilities. Existing computational models describe an entire plant either as a network of simplified equipment models or as a single, very detailed equipment model. The Advanced Process Engineering Co-Simulator (APECS) project (Figure 5) sponsored by the U.S. Department of Energy's National Energy Technology Laboratory (NETL) seeks to bridge the gap between models by integrating plant modeling and equipment modeling software. The goal of the effort is to provide greater insight into the performance of proposed plant designs. The software integration was done using the process-industry standard CAPE-OPEN (Computer Aided Process EngineeringOpen), or CO interface. Several demonstration cases based on operating power plants confirm the viability of this co-simulation approach.

  18. Power Plant Cycling Costs

    SciTech Connect (OSTI)

    Kumar, N.; Besuner, P.; Lefton, S.; Agan, D.; Hilleman, D.

    2012-07-01T23:59:59.000Z

    This report provides a detailed review of the most up to date data available on power plant cycling costs. The primary objective of this report is to increase awareness of power plant cycling cost, the use of these costs in renewable integration studies and to stimulate debate between policymakers, system dispatchers, plant personnel and power utilities.

  19. NUCLEAR PLANT AND CONTROL

    E-Print Network [OSTI]

    NUCLEAR PLANT OPERATIONS AND CONTROL KEYWORDS: software require- ments, safety analysis, formal for the digital protection systems of a nuclear power plant. When spec- ifying requirements for software and CRSA processes are described using shutdown system 2 of the Wolsong nuclear power plants as the digital

  20. History of the production complex: The methods of site selection

    SciTech Connect (OSTI)

    Not Available

    1987-09-01T23:59:59.000Z

    Experience taught the Atomic Energy Commission how to select the best possible sites for its production facilities. AEC officials learned from the precedents set by the wartime Manhattan Project and from their own mistakes in the immediate postwar years. This volume discusses several site selections. The sites covered are: (1) the Hanford Reservation, (2) the Idaho reactor site, (3) the Savannah River Plant, (4) the Paducah Gaseous Diffusion Plant, (5) the Portsmouth Gaseous Diffusion Plant, (6) the Fernald Production Center, (7) the PANTEX and Spoon River Plants, (8) the Rocky Flats Fabrication Facility, and (9) the Miamisburg and Pinellas plants. (JDH)

  1. Evaluation of habitat use by Rocky Mountain elk (Cervus elaphus nelsoni) in north-central New Mexico using global positioning system radio collars

    SciTech Connect (OSTI)

    Biggs, J.; Bennett, K.; Fresquez, P.R.

    1997-04-01T23:59:59.000Z

    In 1996 the authors initiated a study to identify habitat use in north-central New Mexico by Rocky Mountain elk (Cervus elaphus nelsoni) using global positioning system (GPS) radio collars. They collared six elk in the spring of 1996 with GPS radio collars programmed to obtain locational fixes every 23 h. Between April 1, 1996 and January 7, 1997, they collected >1,200 fixes with an approximately 70% observation rate. They have interfaced GPS locational fixes of elk and detailed vegetation maps using the geographical information system to provide seasonal habitat use within mountainous regions of north-central New Mexico. Based on habitat use and availability analysis, use of grass/shrub and pinon/juniper habitats was generally higher than expected during most seasons and use of forested habitats was lower than expected. Most of the collared elk remained on LANL property year-round. The authors believe the application of GPS collars to elk studies in north-central New Mexico to be a more efficient and effective method than the use of VHF (very-high frequency) radio collars.

  2. Elements of environmental concern in the 1990 Clean Air Act Amendments: A perspective of Fort Union coals in northern Rocky Mountains and Great Plains region

    SciTech Connect (OSTI)

    Stricker, G.D.; Ellis, M.E.; Flores, R.M.; Bader, L.R.

    1998-07-01T23:59:59.000Z

    The elements of environmental concern (EECs) named in the 1990 Clean Air Act Amendments include 12 trace elements consisting of antimony, arsenic, beryllium, cadmium, chromium, cobalt, lead, manganese, mercury, nickel, selenium, and uranium. Although all these trace elements are potentially hazardous, arsenic, mercury, lead, and selenium may be targeted in forthcoming Environmental Protection Agency regulations. Fort Union coals contain all the trace elements named in the Clean Air Act Amendments; however, the presence and amounts of individual trace elements vary from basin to basin. In the Powder River Basin, the major producing Fort Union coals (Wyodak-Anderson and equivalent coal beds, and Rosebud coal bed) contain the lowest (or statistically as low) amounts of EECs of any of the coal producing basins (i.e., Williston, Hanna, and Green River) in the region. In addition, when the arithmetic means of these trace elements in Powder River Basin coals are compared to other regions in the conterminous US, they are lower than those of Cretaceous coals in Colorado Plateau, Tertiary lignites in the Gulf Coast, and Pennsylvanian coals in the Illinois and Appalachian Basins. Thus, elements of environmental concern are generally low in Fort Union coals in the Northern Rocky Mountains and Great Plains region, and particularly low in the Powder River Basin. Projected increase in production of Powder River Basin coals will, therefore, be of greater benefit to the nation than an increase in development and production of coals in other basins.

  3. Elements of environmental concern in the 1990 Clean Air Act amendments: A perspective of Fort Union coals in northern Rocky Mountains and Great Plains region

    SciTech Connect (OSTI)

    Stricker, G.D.; Ellis, M.E.; Flores, R.M.; Bader, L.R. [Geological Survey, Denver, CO (United States)

    1998-04-01T23:59:59.000Z

    The elements of environmental concern (EECs) named in the 1990 Clean Air Act Amendments include 12 trace elements consisting of antimony, arsenic, beryllium, cadmium, chromium, cobalt, lead, manganese, mercury, nickel, selenium, and uranium. Although all these trace elements are potentially hazardous, arsenic, mercury, lead, and selenium may be targeted in forthcoming Environmental Protection Agency regulations. Fort Union coals contain all the trace elements named in the Clean Air Act Amendments; however, the presence and amounts of individual trace elements vary from basin to basin. In the Powder River Basin, the major producing Fort Union coals (Wyodak-Anderson and equivalent coal beds, and Rosebud coal bed) contain the lowest (or statistically as low) amounts of EECs of any of the coal producing basins (i.e. Williston, Hanna, and Green River) in the region. In addition, when the arithmetic means of these trace elements in Powder River Basin coals are compared to other regions in the conterminous U.S., they are lower than those of Cretaceous coals in Colorado Plateau, Tertiary lignites in the Gulf Coast, and Pennsylvanian coals in the Illinois and Appalachian Basins. Thus, elements of environmental concern are generally low in Fort Union coals in the Northern Rocky Mountains and Great Plains region, and particularly low in the Powder River Basin. Projected increase in production of Powder River Basin coals will, therefore, be of greater benefit to the nation than an increase in development and production of coals in other basins.

  4. Numerical modeling of the Snowmass Creek paleoglacier, Colorado, and climate in the Rocky Mountains during the Bull Lake glaciation (MIS 6)

    SciTech Connect (OSTI)

    Eric M. Leonard; Mitchell A. Plummer; Paul E. Carrara

    2014-04-01T23:59:59.000Z

    Well-preserved moraines from the penultimate, or Bull Lake, glaciation of Snowmass Creek Valley in the Elk Range of Colorado present an opportunity to examine the character of the high-altitude climate in the Rocky Mountains during Marine Oxygen Isotope Stage 6. This study employs a 2-D coupled mass/energy balance and flow model to assess the magnitudes of temperature and precipitation change that could have sustained the glacier in mass-balance equilibrium at its maximum extent during the Bull Lake glaciation. Variable substrate effects on glacier flow and ice thickness make the modeling somewhat more complex than in geologically simpler settings. Model results indicate that a temperature depression of about 6.7C compared with the present (19712000 AD) would have been necessary to sustain the Snowmass Creek glacier in mass-balance equilibrium during the Bull Lake glaciation, assuming no change in precipitation amount or seasonality. A 50% increase or decrease from modern precipitation would have been coupled with 5.2C and 9.1C Bull Lake temperature depressions respectively. Uncertainty in these modeled temperature depressions is about 1C.

  5. Asymptotically locally AdS and flat black holes in the presence of an electric field in the Horndeski scenario

    E-Print Network [OSTI]

    Adolfo Cisterna; Cristin Erices

    2014-03-03T23:59:59.000Z

    Asymptotically locally AdS and asymptotically flat black hole solutions are found for a particular case of the Horndeski action. The action contains the Einstein-Hilbert term with a cosmological constant, a real scalar field with a non minimal kinetic coupling given by the Einstein tensor, the minimal kinetic coupling and the Maxwell term. There is no scalar potential. The solution has two integration constants related with the mass and the electric charge. The solution is given for all dimensions. A new class of asymptotically locally flat spherically symmetric black holes is found when the minimal kinetic coupling vanishes and the cosmological constant is present. In this case we get a solution which represents an electric Universe. The electric field at infinity is only supported by $\\Lambda$. When the cosmological constant vanishes the black hole is asymptotically flat.

  6. Integration in the GHP formalism III: Finding all conformally flat radiation metrics as an example of an `optimal situation'

    E-Print Network [OSTI]

    S. Brian Edgar; Garry Ludwig

    1997-01-24T23:59:59.000Z

    Held has proposed an integration procedure within the GHP formalism built around four real, functionally independent, zero-weighted scalars. He suggests that such a procedure would be particularly simple for the `optimal situation', when the formalism directly supplies the full quota of four scalars of this type; a spacetime without any Killing vectors would be such a situation. Wils has recently obtained a metric which he claims is the only conformally flat, pure radiation metric which is not a plane wave; this metric has been shown by Koutras to admit no Killing vectors, in general. Therefore, as a simple illustration of the GHP integration procedure, we obtain systematically the complete class of conformally flat, pure radiation metrics. Our result shows that the conformally flat, pure radiation metrics, which are not plane waves, are a larger class than Wils has obtained.

  7. Environmental applications of the particle analysis system

    SciTech Connect (OSTI)

    Moritz, E.J.; Hoffman, C.R.

    1993-09-28T23:59:59.000Z

    This study demonstrates the applicability of particle counting technology for analysis of various water treatment systems at the Rocky Flats Plant. The Particle Analysis System described in this study determined the water quality of samples from environmental remediation, stormwater treatment, and drinking water treatment operations. Samples were measured in either discrete or on-line mode. This data showed filtration efficiencies, particle counts, particle size distributions, and real-time treatment system performance. Particle counting proved more sensitive than the turbidimetric measurement technique commonly used by the water treatment industry. Particle counting is a two-dimensional measurement of counts and sizes, whereas turbidity is a one-dimensional measurement of water clarity. Samples showing identical turbidities could be distinguished easily with the Particle Analysis System. The Particle Analysis System proved to be an efficient and reliable water quality measurement tool, and it is applicable to a variety of water treatment systems at the Rocky Flats Plant.

  8. Correspondence Between $5D$ Ricci-Flat Cosmological Models and Quintessence Dark Energy Models

    E-Print Network [OSTI]

    Lixin Xu; Hongya Liu; Baorong Chang

    2005-12-26T23:59:59.000Z

    We study the accelerating expansion and the induced dark energy of the $5D$ Ricci-flat universe which is characterized by having a big bounce as opposed to a big bang. We show that the arbitrary function $\\mu(t)$ contained in the $5D$ solutions can be rewritten in terms of the redshift $z$ as a new arbitrary function $f(z)$, and we find that there is a correspondence between this $f(z)$ and the potential $V(\\phi)$ of the 4D quintessence models. Using this correspondence, the arbitrary function $f(z)$ and the $5D$ solution could be specified for a given form of the potential $V(\\phi)$.

  9. Flow modeling of flat oval ductwork elbows using computational fluid dynamics

    SciTech Connect (OSTI)

    Mahank, T.A.; Mumma, S.A. [Pennsylvania State Univ., University Park, PA (United States)

    1997-12-31T23:59:59.000Z

    Incompressible turbulent flow fields in heating, ventilating, and air-conditioning (HVAC) elbows were computed using an incompressible, three-dimensional computational fluid dynamics (CFD) solver implementing a {kappa}-{epsilon} turbulence model. Two different geometries were investigated, including 90-degree five-gore hard-bend and easy-bend flat oval elbows. The geometries represent a subset of many configurations analyzed in ASHRAE RP-854, Determination of Duct Fitting Resistance by Numerical Analysis. For each configuration, the zero-length pressure loss coefficient was calculated. The flow was described through contours of velocity and plots of static pressure. The Reynolds number for these flows was held constant at 100,000 based on duct diameter and mean fluid velocity.

  10. Classical stability of black hole Cauchy horizons in two-dimensional asymptotically flat space-times

    E-Print Network [OSTI]

    A. Fabbri

    1996-07-04T23:59:59.000Z

    In this paper we analyse the stability of black hole Cauchy horizons arising in a class of 2d dilaton gravity models. It is shown that due to the characteristic asymptotic Rindler form of the metric of these models, time dependent gravitational perturbations generated in the external region do not necessarily blow-up when propagated along the Cauchy horizon. There exists, in fact, a region of nonzero measure in the space of the parameters characterizing the solutions such that both instability and mass inflation are avoided. This is a new result concerning asymptotically flat space-times, not shared by the well-known solutions of General Relativity. Despite this fact, however, quantum back-reaction seems to produce a scalar curvature singularity there.

  11. Analysis of Generalized Ghost Pilgrim Dark Energy in Non-flat FRW Universe

    E-Print Network [OSTI]

    Abdul Jawad

    2014-12-11T23:59:59.000Z

    This work is based on pilgrim dark energy conjecture which states that phantom-like dark energy possesses the enough resistive force to preclude the formation of black hole. The non-flat geometry is considered which contains the interacting generalized ghost pilgrim dark energy with cold dark matter. Some well-known cosmological parameters (evolution parameter ($\\omega_{\\Lambda}$) and squared speed of sound) and planes ($\\omega_{\\Lambda}$-$\\omega_{\\Lambda}'$ and statefinder) are constructed in this scenario. The discussion of these parameters is totally done through pilgrim dark energy parameter ($u$) and interacting parameter ($d^2$). It is interesting to mention here that the analysis of evolution parameter supports the conjecture of pilgrim dark energy. Also, this model remains stable against small perturbation in most of the cases of $u$ and $d^2$. Further, the cosmological planes correspond to $\\Lambda$CDM limit as well as different well-known dark energy models.

  12. PNNI routing support for ad hoc mobile networking: A flat architecture

    SciTech Connect (OSTI)

    Martinez, L.; Sholander, P.; Tolendino, L.

    1997-12-01T23:59:59.000Z

    This contribution extends the Outside Nodal Hierarchy List (ONHL) procedures described in ATM Form Contribution 97-0766. These extensions allow multiple mobile networks to form either an ad hoc network or an extension of a fixed PNNI infrastructure. This contribution covers the simplest case where the top-most Logical Group Nodes (LGNs), in those mobile networks, all reside at the same level in a PNNI hierarchy. Future contributions will cover the general case where those top-most LGNs reside at different hierarchy levels. This contribution considers a flat ad hoc network architecture--in the sense that each mobile network always participates in the PNNI hierarchy at the preconfigured level of its top-most LGN.

  13. Calibration of a gated flat field spectrometer as a function of x-ray intensity

    SciTech Connect (OSTI)

    Xiong, Gang; Yang, Guohong; Li, Hang; Zhang, Jiyan, E-mail: zhangjiyanzjy@sina.com; Zhao, Yang; Hu, Zhimin; Wei, Minxi; Qing, Bo; Yang, Jiamin; Liu, Shenye; Jiang, Shaoen [Research Center of Laser Fusion, China Academy of Engineering Physics, P. O. Box 919-986, Mianyang 621900 (China)] [Research Center of Laser Fusion, China Academy of Engineering Physics, P. O. Box 919-986, Mianyang 621900 (China)

    2014-04-15T23:59:59.000Z

    We present an experimental determination of the response of a gated flat-field spectrometer at the Shenguang-II laser facility. X-rays were emitted from a target that was heated by laser beams and then were divided into different intensities with a step aluminum filter and collected by a spectrometer. The transmission of the filter was calibrated using the Beijing Synchrotron Radiation Facility. The response characteristics of the spectrometer were determined by comparing the counts recorded by the spectrometer with the relative intensities of the x-rays transmitted through the step aluminum filter. The response characteristics were used to correct the transmission from two shots of an opacity experiment using the same samples. The transmissions from the two shots are consistent with corrections, but discrepant without corrections.

  14. Generalized boundary conditions for general relativity for the asymptotically flat case in terms of Ashtekar's variables

    E-Print Network [OSTI]

    T. Thiemann

    1993-10-29T23:59:59.000Z

    There is a gap that has been left open since the formulation of general relativity in terms of Ashtekar's new variables namely the treatment of asymptotically flat field configurations that are general enough to be able to define the generators of the Lorentz subgroup of the asymptotical Poincar\\'e group. While such a formulation already exists for the old geometrodynamical variables, up to now only the generators of the translation subgroup could be defined because the function spaces of the fields considered earlier are taken too special. The transcription of the framework from the ADM variables to Ashtekar's variables turns out not to be straightforward due to the freedom to choose the internal SO(3) frame at spatial infinity and due to the fact that the non-trivial reality conditions of the Ashtekar framework reenter the game when imposing suitable boundary conditions on the fields and the Lagrange multipliers.

  15. Generalized boundary conditions for general relativity for the asymptotically flat case in terms of Ashtekar's variables

    E-Print Network [OSTI]

    T. Thiemann

    1999-10-04T23:59:59.000Z

    There is a gap that has been left open since the formulation of general relativity in terms of Ashtekar's new variables namely the treatment of asymptotically flat field configurations that are general enough to be able to define the generators of the Lorentz subgroup of the asymptotical Poincar\\'e group. While such a formulation already exists for the old geometrodynamical variables, up to now only the generators of the translation subgroup could be defined because the function spaces of the fields considered earlier are taken too special. The transcription of the framework from the ADM variables to Ashtekar's variables turns out not to be straightforward due to the a priori freedom to choose the internal SO(3) frame at spatial infinity and due to the fact that the non-trivial reality conditions of the Ashtekar framework reenter the stage when imposing suitable boundary conditions on the fields and the Lagrange multipliers.

  16. Method of forming a spacer for field emission flat panel displays

    DOE Patents [OSTI]

    Bernhardt, A.F.; Contolini, R.J.

    1997-08-19T23:59:59.000Z

    Spacers are disclosed for applications such as field emission flat panel displays and vacuum microelectronics, and which involves the application of aerogel/xerogel technology to the formation of the spacer. In a preferred approach the method uses a mold and mold release agent wherein the gel precursor is a liquid which can be applied to the mold filling holes which expose the substrate (either the baseplate or the faceplate). A release agent is applied to the mold prior to precursor application to ease removal of the mold after formation of the dielectric spacer. The shrinkage of the gel during solvent extraction also improves mold removal. The final spacer material is a good dielectric, such as silica, secured to the substrate. 3 figs.

  17. Method of forming a spacer for field emission flat panel displays

    DOE Patents [OSTI]

    Bernhardt, Anthony F. (Berkeley, CA); Contolini, Robert J. (Pleasanton, CA)

    1997-01-01T23:59:59.000Z

    Spacers for applications such as field emission flat panel displays and vacuum microelectronics, and which involves the application of aerogel/xerogel technology to the formation of the spacer. In a preferred approach the method uses a mold and mold release agent wherein the gel precursor is a liquid which can be applied to the mold filling holes which expose the substrate (either the baseplate or the faceplate). A release agent is applied to the mold prior to precursor application to ease removal of the mold after formation of the dielectric spacer. The shrinkage of the gel during solvent extraction also improves mold removal. The final spacer material is a good dielectric, such as silica, secured to the substrate.

  18. Statement from DOE Assistant Secretary for Environmental Management...

    Office of Environmental Management (EM)

    Rocky Flats nuclear weapons production site to the Department of the Interior's U.S. Fish and Wildlife Service for use as a National Wildlife Refuge. Additionally the Rocky...

  19. A Hydrostratigraphic Framework Model and Alternatives for the Groundwater Flow and Contaminant Transport Model of Corrective Action Unit 98: Frenchman Flat, Clark, Lincoln and Nye Counties, Nevada

    SciTech Connect (OSTI)

    Bechtel Nevada

    2005-09-01T23:59:59.000Z

    A new, revised three-dimensional (3-D) hydrostratigraphic framework model for Frenchman Flat was completed in 2004. The area of interest includes Frenchman Flat, a former nuclear testing area at the Nevada Test Site, and proximal areas. Internal and external reviews of an earlier (Phase I) Frenchman Flat model recommended additional data collection to address uncertainties. Subsequently, additional data were collected for this Phase II initiative, including five new drill holes and a 3-D seismic survey.

  20. Unclassified Source Term and Radionuclide Data for Corrective Action Unit 98: Frenchman Flat Nevada Test Site, Nevada, Rev. No.: 0

    SciTech Connect (OSTI)

    Farnham, Irene

    2005-09-01T23:59:59.000Z

    Frenchman Flat is one of several areas of the Nevada Test Site (NTS) used for underground nuclear testing (Figure 1-1). These nuclear tests resulted in groundwater contamination in the vicinity of the underground test areas. As a result, the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) is currently conducting a corrective action investigation (CAI) of the Frenchman Flat underground test areas. Since 1996, the Nevada Division of Environmental Protection (NDEP) has regulated NNSA/NSO corrective actions through the ''Federal Facility Agreement and Consent Order'' ([FFACO], 1996). Appendix VI of the FFACO agreement, ''Corrective Action Strategy'', was revised on December 7, 2000, and describes the processes that will be used to complete corrective actions, including those in the Underground Test Area (UGTA) Project. The individual locations covered by the agreement are known as corrective action sites (CASs), which are grouped into corrective action units (CAUs). The UGTA CASs are grouped geographically into five CAUs: Frenchman Flat, Central Pahute Mesa, Western Pahute Mesa, Yucca Flat/Climax Mine, and Rainier Mesa/Shoshone Mountain (Figure 1-1). These CAUs have distinctly different contaminant source, geologic, and hydrogeologic characteristics related to their location (FFACO, 1996). The Frenchman Flat CAU consists of 10 CASs located in the northern part of Area 5 and the southern part of Area 11 (Figure 1-1). This report documents the evaluation of the information and data available on the unclassified source term and radionuclide contamination for Frenchman Flat, CAU 98. The methodology used to estimate hydrologic source terms (HSTs) for the Frenchman Flat CAU is also documented. The HST of an underground nuclear test is the portion of the total inventory of radionuclides that is released over time into the groundwater following the test. The total residual inventory of radionuclides associated with one or more tests is known as the radiologic source term (RST). The RST is comprised of radionuclides in water, glass, or other phases or mineralogic forms. This evaluation was conducted in support of the development of a CAU contaminant transport model for the Frenchman Flat CAU.

  1. The X-ray afterglow flat segment in short GRB 051221A: Energy injection from a millisecond magnetar?

    E-Print Network [OSTI]

    Yizhong Fan; Dong Xu

    2006-07-12T23:59:59.000Z

    The flat segment lasting $\\sim 10^4$ seconds in the X-ray afterglow of GRB051221A represents the first clear case of strong energy injection in the external shock of a short GRB afterglow. In this work, we show that a millisecond pulsar with dipole magnetic field $\\sim 10^{14}$ Gauss could well account for that energy injection. The good quality X-ray flat segment thus suggests that the central engine of this short burst may be a millisecond magnetar.

  2. Mott Insulator-Superfluid Transition in a Generalized Bose-Hubbard Model with Topologically Non-trivial Flat-Band

    E-Print Network [OSTI]

    Xing-Hai Zhang; Su-Peng Kou

    2012-05-30T23:59:59.000Z

    In this paper, we studied a generalized Bose-Hubbard model on a checkerboard lattice with topologically nontrivial flat-band. We used mean-field method to decouple the model Hamiltonian and obtained phase diagram by Landau theory of second-order phase transition. We further calculate the energy gap and the dispersion of quasi-particle or quasi-hole in Mott insulator state and found that in strong interaction limit the quasi-particles or the quasi-holes also have flat bands.

  3. Conditional sterility in plants

    DOE Patents [OSTI]

    Meagher, Richard B. (Athens, GA); McKinney, Elizabeth (Athens, GA); Kim, Tehryung (Taejeon, KR)

    2010-02-23T23:59:59.000Z

    The present disclosure provides methods, recombinant DNA molecules, recombinant host cells containing the DNA molecules, and transgenic plant cells, plant tissue and plants which contain and express at least one antisense or interference RNA specific for a thiamine biosynthetic coding sequence or a thiamine binding protein or a thiamine-degrading protein, wherein the RNA or thiamine binding protein is expressed under the regulatory control of a transcription regulatory sequence which directs expression in male and/or female reproductive tissue. These transgenic plants are conditionally sterile; i.e., they are fertile only in the presence of exogenous thiamine. Such plants are especially appropriate for use in the seed industry or in the environment, for example, for use in revegetation of contaminated soils or phytoremediation, especially when those transgenic plants also contain and express one or more chimeric genes which confer resistance to contaminants.

  4. Trip report, Interagency Manufacturing Operations Group (IMOG) Steering Committee meeting, November 29, 1989

    SciTech Connect (OSTI)

    Butterworth, R.R.

    1989-12-06T23:59:59.000Z

    As the Subgroup Chairman for the Process Automation Control Technology Subgroup of IMOG, I was requested to attend the annual Steering Committee Meeting held this year at the Allied-Signal Kansas City Plant and summarize the past year's activities of the Subgroup. The next IMOG Steering Committee Meeting will be held November 14 and 15, 1990 in Los Alamos. The next Process Automation Control Technology Subgroup Meeting will be held in June, 1990 in Rocky Flats.

  5. Vacuum-induction melting, refining, and casting of uranium and its alloys

    SciTech Connect (OSTI)

    Jackson, R.J.

    1989-10-11T23:59:59.000Z

    The vacuum-induction melting (VIM), refining, and casting of uranium and its alloys are discussed. Emphasis is placed on historical development, VIM equipment, crucible and mold design, furnace atmospheres, melting parameters, impurity pickup, ingot quality, and economics. The VIM procedures used to produce high-purity, high-quality sound ingots at the US Department of Energy Rocky Flats Plant are discussed in detail.

  6. Design and performance of a fluidized-bed incinerator for TRU combustible wastes

    SciTech Connect (OSTI)

    Meile, L.J.; Meyer, F.G.

    1982-01-01T23:59:59.000Z

    Problems encountered in the incineration of glovebox generated waste at Rocky Flats Plant (RFP) led to the development of a fluidized-bed incineration (FBI) system for transuranic (TRU) combustible wastes. Laboratory and pilot-scale testing of the process preceded the installation of an 82-kg/h production demonstration incinerator at RFP. The FBI process is discussed, and the design of the demonstration incinerator is described. Operating experience and process performance for both the pilot and demonstration units are presented.

  7. Self-Assembly of Collagen on Flat Surfaces: The Interplay of Collagen-Collagen and Collagen-Substrate Interactions

    E-Print Network [OSTI]

    Ciobanu, Cristian

    Self-Assembly of Collagen on Flat Surfaces: The Interplay of Collagen-Collagen and Collagen also self-assemble in vitro from solution. While previous in vitro studies showed that the p such control could be exerted are still elusive. To address this issue and to be able to simulate self-assembly

  8. Interim Letter Report - Verification Survey of 19 Grids in the Lester Flat Area, David Witherspoon Inc. 1630 Site Knoxville, Tennessee

    SciTech Connect (OSTI)

    P.C. Weaver

    2008-10-17T23:59:59.000Z

    Perform verification surveys of 19 available grids located in the Lester Flat Area at the Davod Witherspoon Site. The survey grids included E11, E12, E13, F11, F12, F13, F14, F15, G15, G16, G17, H16, H17, H18, X16, X17, X18, K16, and J16.

  9. Telephone Flat Geothermal Development Project Environmental Impact Statement Environmental Impact Report. Final

    SciTech Connect (OSTI)

    None

    1999-02-01T23:59:59.000Z

    This Final Environmental Impact Statement and Environmental Impact Report (Final EIS/EIR) has been prepared to meet the requirements of the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA). The Proposed Action includes the construction, operation, and decommissioning of a 48 megawatt (gross) geothermal power plant with ancillary facilities (10-12 production well pads and 3-5 injection well pads, production and injection pipelines), access roads, and a 230-kilovolt (kV) transmission line in the Modoc National Forest in Siskiyou County, California. Alternative locations for the power plant site within a reasonable distance of the middle of the wellfield were determined to be technically feasible. Three power plant site alternatives are evaluated in the Final EIS/EIR.

  10. Completion Report for Model Evaluation Well ER-11-2: Corrective Action Unit 98: Frenchman Flat

    SciTech Connect (OSTI)

    NSTec Underground Test Area and Boreholes Programs and Operations

    2013-01-22T23:59:59.000Z

    Model Evaluation Well ER-11-2 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of Nevada Environmental Management Operations at the Nevada National Security Site (formerly known as the Nevada Test Site). The well was drilled in August 2012 as part of a model evaluation program in the Frenchman Flat area of Nye County, Nevada. The primary purpose of the well was to provide detailed geologic, hydrogeologic, chemical, and radionuclide data that can be used to test and build confidence in the applicability of the Frenchman Flat Corrective Action Unit flow and transport models for their intended purpose. In particular, this well was designed to provide data to evaluate the uncertainty in model forecasts of contaminant migration from the upgradient underground nuclear test PIN STRIPE, conducted in borehole U-11b in 1966. Well ER-11-2 will provide information that can be used to refine the Phase II Frenchman Flat hydrostratigraphic framework model if necessary, as well as to support future groundwater flow and transport modeling. The main 31.1-centimeter (cm) hole was drilled to a total depth of 399.6 meters (m). A completion casing string was not set in Well ER-11-2. However, a piezometer string was installed in the 31.1-cm open hole. The piezometer is composed of 7.3-cm stainless-steel tubing hung on 6.0-cm carbon-steel tubing via a crossover sub. The piezometer string was landed at 394.5 m, for monitoring the lower tuff confining unit. Data collected during and shortly after hole construction include composite drill cuttings samples collected every 3.0 m, various geophysical logs, water quality (including tritium and other test-related radionuclides) measurements, and water level measurements. The well penetrated 42.7 m of Quaternary and Tertiary alluvium and 356.9 m of Tertiary volcanic rock. The water-level measured in the piezometer string on September 25, 2012, was 353.8 m below ground surface. No tritium above levels detectable by field methods were encountered in this hole. No well development or hydrologic testing was conducted in this well immediately after completion, and future well development, sampling, and hydrologic testing planned for this well will be limited due to the diameter of the piezometer string. The stratigraphy, general lithology, and the water level are as expected, but the section of geology encountered is higher than expected due to faulting. No tritium above the minimum detection limit of the field equipment was detected because the target aquifer (the Topopah Spring aquifer) at Well ER-11-2 is structurally higher than expected and thus unsaturated.

  11. Completion Report for Model Evaluation Well ER-5-5: Corrective Action Unit 98: Frenchman Flat

    SciTech Connect (OSTI)

    NSTec Underground Test Area and Boreholes Programs and Operations

    2013-01-18T23:59:59.000Z

    Model Evaluation Well ER-5-5 was drilled for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office in support of Nevada Environmental Management Operations at the Nevada National Security Site (formerly known as the Nevada Test Site). The well was drilled in July and August 2012 as part of a model evaluation well program in the Frenchman Flat area of Nye County, Nevada. The primary purpose of the well was to provide detailed geologic, hydrogeologic, chemical, and radiological data that can be used to test and build confidence in the applicability of the Frenchman Flat Corrective Action Unit flow and transport models for their intended purpose. In particular, this well was designed to obtain data to evaluate the uncertainty in model forecasts of contaminant migration from the upgradient underground nuclear test MILK SHAKE, conducted in Emplacement Hole U-5k in 1968, which were considered to be uncertain due to the unknown extent of a basalt lava-flow aquifer present in this area. Well ER-5-5 is expected to provide information to refine the Phase II Frenchman Flat hydrostratigraphic framework model, if necessary, as well as to support future groundwater flow and transport modeling. The 31.1-centimeter (cm) diameter hole was drilled to a total depth of 331.3 meters (m). The completion string, set at the depth of 317.2 m, consists of 16.8-cm stainless-steel casing hanging from 19.4-cm carbon-steel casing. The 16.8-cm stainless-steel casing has one slotted interval open to the basalt lava-flow aquifer and limited intervals of the overlying and underlying alluvial aquifer. A piezometer string was also installed in the annulus between the completion string and the borehole wall. The piezometer is composed of 7.3-cm stainless-steel tubing suspended from 6.0-cm carbon-steel tubing. The piezometer string was landed at 319.2 m, to monitor the basalt lava-flow aquifer. Data collected during and shortly after hole construction include composite drill cuttings samples collected every 3.0 m, various geophysical logs, preliminary water quality measurements, and water-level measurements. The well penetrated 331.3 m of QuaternaryTertiary alluvium, including an intercalated layer of saturated basalt lava rubble. No well development or hydrologic testing was conducted in this well immediately after completion; however, a preliminary water level was measured in the piezometer string at the depth of 283.4 m on September 25, 2012. No tritium above the minimum detection limit of the field instruments was detected in this hole. Future well development, sampling, and hydrologic testing planned for this well will provide more accurate hydrologic information for this site. The stratigraphy, general lithology, and water level were as expected, though the expected basalt lava-flow aquifer is basalt rubble and not the dense, fractured lava as modeled. The lack of tritium transport is likely due to the difference in hydraulic properties of the basalt lava-flow rubble encountered in the well, compared to those of the fractured aquifer used in the flow and transport models.

  12. PHYSICAL PLANT POLICY & PROCEDURE

    E-Print Network [OSTI]

    Fernandez, Eduardo

    PHYSICAL PLANT POLICY & PROCEDURE TITLE PHYSICAL PLANT HIGH VOLTAGE PREVENTIVE MAINTENANCE OBJECTIVE AND PURPOSE To establish a consistent policy of performing Preventive Maintenance on high voltage by the G.S.A. Preventive Maintenance sections E- 29 (high voltage oil circuit breaker), E-32 (high voltage

  13. Plant fatty acid hydroxylase

    DOE Patents [OSTI]

    Somerville, Chris (Portola Valley, CA); van de Loo, Frank (Lexington, KY)

    2000-01-01T23:59:59.000Z

    The present invention relates to the identification of nucleic acid sequences and constructs, and methods related thereto, and the use of these sequences and constructs to produce genetically modified plants for the purpose of altering the composition of plant oils, waxes and related compounds.

  14. Modulating lignin in plants

    DOE Patents [OSTI]

    Apuya, Nestor; Bobzin, Steven Craig; Okamuro, Jack; Zhang, Ke

    2013-01-29T23:59:59.000Z

    Materials and methods for modulating (e.g., increasing or decreasing) lignin content in plants are disclosed. For example, nucleic acids encoding lignin-modulating polypeptides are disclosed as well as methods for using such nucleic acids to generate transgenic plants having a modulated lignin content.

  15. Plant Ecology An Introduction

    E-Print Network [OSTI]

    Cochran-Stafira, D. Liane

    1 Plant Ecology An Introduction Ecology as a Science Study of the relationships between living and causes of the abundance and distribution of organisms Ecology as a Science We'll use the perspective of terrestrial plants Basic ecology - ecological principles Applied ecology - application of principles

  16. RESEARCH ARTICLE PLANT GENETICS

    E-Print Network [OSTI]

    Napp, Nils

    relative) in the Brassicaceae plant family is determined by the genotype of the plant at the self-incompatibility-locus phenotype in a self-incompatible Arabidopsis species. Selection has created a dynamic repertoire of s of regulation among alleles. S porophytic self-incompatibility (SI) is a genetic system that evolved in hermaph

  17. NUCLEAR PLANT OPERATIONS AND

    E-Print Network [OSTI]

    Demazire, Christophe

    NUCLEAR PLANT OPERATIONS AND CONTROL KEYWORDS: moderator temper ature coefficient, reactivity co reactor Unit 4 of the Ringhals Nuclear Power Plant (Sweden) during fuel cycle 16 is analyzed absorption cross-section behavior. Consequently, if NUCLEAR TECHNOLOGY VOL. 140 NOV. 2002 147 #12;Demazire

  18. NUCLEAR PLANT OPERATIONS AND

    E-Print Network [OSTI]

    Pzsit, Imre

    NUCLEAR PLANT OPERATIONS AND CONTROL KEYWORDS: moderator temper- ature coefficient, reactivity co reactor Unit 4 of the Ringhals Nuclear Power Plant (Sweden) during fuel cycle 16 is analyzed. Consequently, if*E-mail: demaz@nephy.chalmers.se NUCLEAR TECHNOLOGY VOL. 140 NOV. 2002 147 #12;high-burnup fuel

  19. Performance of a high fill factor, indirect detection prototype flat-panel imager for mammography

    SciTech Connect (OSTI)

    El-Mohri, Youcef; Antonuk, Larry E.; Zhao Qihua; Wang Yi; Li Yixin; Du Hong; Sawant, Amit [Department of Radiation Oncology, University of Michigan Medical Center, Ann Arbor, Michigan 48109 (United States)

    2007-01-15T23:59:59.000Z

    Empirical and theoretical investigations of the performance of a small-area, high-spatial-resolution, active matrix flat-panel imager, operated under mammographic conditions, is reported. The imager is based on an indirect detection array incorporating a continuous photodiode design, as opposed to the discrete photodiode design employed in conventional flat-panel imagers. Continuous photodiodes offer the prospect of higher fill factors, particularly for arrays with pixel pitches below {approx}100 {mu}m. The array has a pixel-to-pixel pitch of 75 {mu}m and a pixel format of 512x512, resulting in an active area of {approx}3.8x3.8 cm{sup 2}. The array was coupled to two commercially available, structured CsI:Tl scintillators of {approx}150 {mu}m thickness: one optimized for high light output (FOS-HL) and the other for high spatial resolution (FOS-HR), resulting in a pair of imager configurations. Measurements of sensitivity, modulation transfer function (MTF), noise power spectra (NPS), and detective quantum efficiency (DQE) were performed with a 26 kVp mammography beam at exposures ranging from {approx}0.5 to {approx}19 mR. MTF results from both CsI:Tl scintillators show that the array demonstrates good spatial resolution, indicating effective isolation between adjacent pixels. The effect of additive noise of the system on DQE was observed to be significantly higher for the FOS-HR scintillator compared to the FOS-HL scintillator due to lower sensitivity of the former. For the FOS-HL scintillator, DQE performance was generally high at high exposures, limited by the x-ray quantum efficiency, Swank factor and the MTF of the scintillators. For both scintillators, the DQE performance degrades at lower exposures due to the relatively large contribution of additive noise. Theoretical calculations based on a cascaded systems model were found to be in general agreement with the empirically determined NPS and DQE values. Finally, such calculations were used to predict potential DQE performance for hypothetical 50 {mu}m pixel pitch imagers, employing similar continuous photodiode design and realistic inputs derived from the empirical measurements.

  20. Top 10 plant pathogenic bacteria in molecular plant pathology.

    E-Print Network [OSTI]

    2012-01-01T23:59:59.000Z

    plants are being closely grouped together, for example pv.oryzae pv. oryzae AvrXa21 and implications for plant innatePseudomonas syringae pv. tomato in Tanzania. Plant Dis. 91,

  1. Estimates of incremental oil recoverable by carbon dioxide flooding and related carbon dioxide supply requirements for flooding major carbonate reservoirs in the Permian, Williston, and other Rocky Mountain basins

    SciTech Connect (OSTI)

    Goodrich, J.H.

    1982-12-01T23:59:59.000Z

    The objective of the work was to build a solid engineering foundation (in) carbonate reservoirs for the purpose of extending the technology base in carbon dioxide miscible flooding. This report presents estimates of incremental oil recovery and related carbon dioxide supply requirements for selected carbonate reservoirs in the Permian, Williston, and Rocky Mountain Basins. The estimates presented here are based on calculations using a volumetric model derived and described in this report. The calculations utilized data developed in previous work. Calculations were made for a total of 279 reservoirs in the Permian, Williston, and several smaller Rocky Mountain Basins. Results show that the carbonate reservoirs of the Permian Basin constitute an order of magnitude larger target for carbon dioxide flooding than do all the carbonate reservoirs of the Williston and Rocky Mountain intermontane basins combined. Review of the calculated data in comparison with information from earlier work indicates that the figures given here are probably optimistic in that incremental oil volumes may be biased toward the high side while carbon dioxide supply requirements may be biased toward the low side. However, the information available would not permit further practical refinement of the calculations. Use of the incremental oil figures given for individual reservoirs as an official estimate is not recommended because of various uncertainties in individual field data. Further study and compilation of data for field projects as they develop appears warranted to better calibrate the calculation procedures and thus to develop more refined estimates of incremental oil potential and carbon dioxide supply requirements. 11 figures, 16 tables.

  2. Thin-film silicon triple-junction solar cell with 12.5% stable efficiency on innovative flat light-scattering substrate

    E-Print Network [OSTI]

    Psaltis, Demetri

    Thin-film silicon triple-junction solar cell with 12.5% stable efficiency on innovative flat light://jap.aip.org/about/rights_and_permissions #12;Thin-film silicon triple-junction solar cell with 12.5% stable efficiency on innovative flat light require light-trapping schemes that are predominantly based on depositing the solar cells on rough

  3. Numerical Simulation of Inter-basin Groundwater Flow into Northern Yucca Flat, Nevada National Security Site, Using the Death Valley Regional Flow System Model

    SciTech Connect (OSTI)

    Pohlmann Karl,Ye Ming

    2012-03-01T23:59:59.000Z

    Models of groundwater flow for the Yucca Flat area of the Nevada National Security Site (NNSS) are under development by the U.S. Department of Energy (DOE) for corrective action investigations of the Yucca Flat-Climax Mine Corrective Action Unit (CAU). One important aspect of these models is the quantity of inter-basin groundwater flow from regional systems to the north. This component of flow, together with its uncertainty, must be properly accounted for in the CAU flow models to provide a defensible regional framework for calculations of radionuclide transport that will support determinations of the Yucca Flat-Climax Mine contaminant boundary. Because characterizing flow boundary conditions in northern Yucca Flat requires evaluation to a higher level of detail than the scale of the Yucca Flat-Climax Mine CAU model can efficiently provide, a study more focused on this aspect of the model was required.

  4. A Cold War Battlefield: Frenchman Flat Historic District, Nevada Test Site, Nye County, Nevada

    SciTech Connect (OSTI)

    Johnson, William Gray [DRI; Holz, Barbara A [DRI; Jones, Robert [DRI

    2000-08-01T23:59:59.000Z

    This report provides the U.S. Department of Energy, Nevada Operations Office with the documentation necessary to establish the Frenchman Flat Historic District on the Nevada Test Site (NTS). It includes a list of historic properties that contribute to the eligibility of the district for inclusion in the National Register of Historic Places (NRHP) and provides contextual information establishing its significance. The list focuses on buildings, structures and features associated with the period of atmospheric testing of nuclear weapons on the NTS between 1951 and 1962. A total of 157 locations of buildings and structures were recorded of which 115 are considered to be eligible for the NRHP. Of these, 28 have one or more associated features which include instrumentation supports, foundations, etc. The large majority of contributing structures are buildings built to study the blast effects of nuclear weaponry. This has resulted in a peculiar accumulation of deteriorated structures that, unlike most historic districts, is best represented by those that are the most damaged. Limitations by radiological control areas, surface exposure and a focus on the concentration of accessible properties on the dry lake bed indicate additional properties exist which could be added to the district on a case-by-case basis.

  5. Asymptotic properties of the development of conformally flat data near spatial infinity

    E-Print Network [OSTI]

    J. A. Valiente Kroon

    2007-01-30T23:59:59.000Z

    Certain aspects of the behaviour of the gravitational field near null and spatial infinity for the developments of asymptotically Euclidean, conformally flat initial data sets are analysed. Ideas and results from two different approaches are combined: on the one hand the null infinity formalism related to the asymptotic characteristic initial value problem and on the other the regular Cauchy initial value problem at spatial infinity which uses Friedrich's representation of spatial infinity as a cylinder. The decay of the Weyl tensor for the developments of the class of initial data under consideration is analysed under some existence and regularity assumptions for the asymptotic expansions obtained using the cylinder at spatial infinity. Conditions on the initial data to obtain developments satisfying the Peeling Behaviour are identified. Further, the decay of the asymptotic shear on null infinity is also examined as one approaches spatial infinity. This decay is related to the possibility of selecting the Poincar\\'e group out of the BMS group in a canonical fashion. It is found that for the class of initial data under consideration, if the development peels, then the asymptotic shear goes to zero at spatial infinity. Expansions of the Bondi mass are also examined. Finally, the Newman-Penrose constants of the spacetime are written in terms of initial data quantities and it is shown that the constants defined at future null infinity are equal to those at past null infinity.

  6. Time asymmetric spacetimes near null and spatial infinity. I. Expansions of developments of conformally flat data

    E-Print Network [OSTI]

    J. A. Valiente Kroon

    2004-08-26T23:59:59.000Z

    The Conformal Einstein equations and the representation of spatial infinity as a cylinder introduced by Friedrich are used to analyse the behaviour of the gravitational field near null and spatial infinity for the development of data which are asymptotically Euclidean, conformally flat and time asymmetric. Our analysis allows for initial data whose second fundamental form is more general than the one given by the standard Bowen-York Ansatz. The Conformal Einstein equations imply upon evaluation on the cylinder at spatial infinity a hierarchy of transport equations which can be used to calculate in a recursive way asymptotic expansions for the gravitational field. It is found that the the solutions to these transport equations develop logarithmic divergences at certain critical sets where null infinity meets spatial infinity. Associated to these, there is a series of quantities expressible in terms of the initial data (obstructions), which if zero, preclude the appearance of some of the logarithmic divergences. The obstructions are, in general, time asymmetric. That is, the obstructions at the intersection of future null infinity with spatial infinity are different, and do not generically imply those obtained at the intersection of past null infinity with spatial infinity. The latter allows for the possibility of having spacetimes where future and past null infinity have different degrees of smoothness. Finally, it is shown that if both sets of obstructions vanish up to a certain order, then the initial data has to be asymptotically Schwarzschildean to some degree.

  7. EVALUATION OF FLAT-PLATE PHOTOVOLTAIC THERMAL HYBRID SYSTEMS FOR SOLAR ENERGY UTILIZATION.

    SciTech Connect (OSTI)

    ANDREWS,J.W.

    1981-06-01T23:59:59.000Z

    The technical and economic attractiveness of combined photovoltaic/thermal (PV/T) solar energy collectors was evaluated. The study was limited to flat-plate collectors since concentrating photovoltaic collectors require active cooling and thus are inherently PV/T collectors, the only decision being whether to use the thermal energy or to dump it. it was also specified at the outset that reduction in required roof area was not to be used as an argument for combining the collection of thermal and electrical energy into one module. Three tests of economic viability were identified, all of which PV/T must pass if it is to be considered a promising alternative: PV/T must prove to be competitive with photovoltaic-only, thermal-only, and side-by-side photovoltaic-plus-thermal collectors and systems. These three tests were applied to systems using low-temperature (unglazed) collectors and to systems using medium-temperature (glazed) collectors in Los Angeles, New York, and Tampa. For photovoltaics, the 1986 DOE cost goals were assumed to have been realized, and for thermal energy collection two technologies were considered: a current technology based on metal and glass, and a future technology based on thin-film plastics. The study showed that for medium-temperature applications PV/T is not an attractive option in any of the locations studied. For low-temperature applications, PV/T appears to be marginally attractive.

  8. Axisymmetric equilibrium models for magnetized neutron stars in General Relativity under the Conformally Flat Condition

    E-Print Network [OSTI]

    Pili, A G; Del Zanna, L

    2014-01-01T23:59:59.000Z

    Extremely magnetized neutron stars with magnetic fields as strong as $\\sim 10^{15-16}$ G, or magnetars, have received considerable attention in the last decade due to their identification as a plausible source for Soft Gamma Repeaters and Anomalous X-ray Pulsars. Moreover, this class of compact objects has been proposed as a possible engine capable of powering both Long and Short Gamma-Ray Bursts, if the rotation period in their formation stage is short enough (~1 ms). Such strong fields are expected to induce substantial deformations of the star and thus to produce the emission of gravitational waves. Here we investigate, by means of numerical modeling, axisymmetric static equilibria of polytropic and strongly magnetized stars in full general relativity, within the ideal magneto-hydrodynamic regime. The eXtended Conformally Flat Condition (XCFC) for the metric is assumed, allowing us to employ the techniques introduced for the X-ECHO code [Bucciantini & Del Zanna, 2011, Astron. Astrophys. 528, A101], pro...

  9. Flat ATIR Optics Approach to CPV: December 3, 2009 - December 3, 2010 (Revised)

    SciTech Connect (OSTI)

    Schultz, D.

    2011-10-01T23:59:59.000Z

    An agglomeration of factors has stifled the economic promise of CPV technology. Foremost among these factors are: insufficient optical efficiency, misfit with existing solar infrastructure and production capabilities, and inadequate reliability of the optic-receiver pairing. These difficulties are largely driven by the choice of optics. The CPV industry is constrained in a paradigm of bulky reflective or refractive optics that operate best at either low concentration (2-5X) or high concentration (100X and above). Low concentration approaches are plagued by marginal economics, while high concentration approaches face heightened technical risks. High concentration systems inevitably face thermal management hurdles and often do not fit well with the existing solar infrastructure. Using Aggregated Total Internal Reflection (ATIR) as the optical mechanism for gathering light, a cost effective, line-focus optic can be produced at scale to provide superior optical efficiency in a flat profile and operate at a mid level of concentration to mitigate the tradeoff between economic benefit and adoptability. Substantiating this motivational premise behind the ATIR optics approach to CPV requires performance data. Foremost among the goals for establishing the viability of ATIR optics in solar is demonstrating optical efficiency. Banyan Energy performed an outdoor test of optical efficiency (OE) based on short circuit current using the line-focus Lens Step prototype.

  10. Entropic self-assembly of freely rotating polyhedral particles confined to a flat interface

    E-Print Network [OSTI]

    V. Thapar; T. Hanrath; F. A. Escobedo

    2014-11-29T23:59:59.000Z

    The self-assembly of hard polyhedral particles confined to a flat interface is studied using Monte Carlo simulations. The particles are pinned to the interface by restricting their movement in the direction perpendicular to it while allowing their free rotations. The six different polyhedral shapes studied in this work are selected from a family of truncated cubes defined by a truncation parameter, s, which varies from cubes (s = 0) via cuboctahedra (s = 0.5) to octahedra (s = 1). Our results suggest that shapes with small values of s show square-like behavior whereas shapes with large values of s tend to show more disc-like behavior. At an intermediate value of s = 0.4, the phase behavior of the system shows both square-like and disc-like features. The results are also compared with the phase behavior of 3D bulk polyhedra and of 2D rounded hard squares. Both comparisons reveal key similarities in the number and sequence of mesophases and solid phases observed. These insights on 2D entropic self-assembly of polyhedral particles is a first step toward understanding the self-assembly of particles at fluid-fluid interfaces, which is driven by a complex interplay of entropic and enthalpic forces.

  11. Exploration applications of a transgressive tidal flats model to Mississippian Midale carbonates, eastern Williston Basin

    SciTech Connect (OSTI)

    Porter, L.A.; Reid, R.S.R.

    1985-05-01T23:59:59.000Z

    Midale (Mississippian) production was first established in 1953 in Saskatchewan, Canada. The unit was initially defined in the subsurface as the carbonate interval between the top of the Frobisher Anhydrite and the base of the Midale Anhydrite. That nomenclature is used in this report. During 1953, Midale production was found in the United States portion of the Williston basin in Bottineau County, North Dakota. Later exploration extended Midale production westward into Burke County, North Dakota. Cumulative production from the Midale is approximately 660 million bbl, of which 640 million bbl are from Canadian fields. Initially, hydrocarbon entrapment in the Midale was believed to be controlled by the Mississippian subcrop, with the Burke County production controlled by low-relief structural closure. Petrographic examination of cores and cuttings from the Midale in both Saskatchewan, Canada, and Burke and Bottineau Counties, North Dakota, indicates that production is controlled by facies changes within the unit. Stratigraphic traps are formed by the lateral and vertical changes from grain-supported facies deposited in tidal channel, subtidal bar, or beach settings; seals are formed by mud-rich sediments. Use of a transgressive carbonate tidal flats model best explains current production patterns and indicates substantial potential for additional production in eastern North Dakota and South Dakota.

  12. Exploration applications of a transgressive tidal-flats model to Mississippian Midale carbonates, eastern Williston Basin

    SciTech Connect (OSTI)

    Porter, L.A.; Reid, F.S.

    1985-02-01T23:59:59.000Z

    Midale (Mississippian) production was first indicated in 1953 in Saskatchewan, Canada. The unit was initially defined in the subsurface as the carbonate interval between the top of the Frobisher Anhydrite and the base of the Midale Anhydrite. This same nomenclature is used in this paper. In 1953, Midale production was found on the US side of the Williston basin in Bottineau County, North Dakota. Later exploration extended Midale production westward into Burke County, North Dakota, in 1955. Cumulative production from the Midale is approximately 660 million bbl with 640 million from the Canadian side of the Williston basin. Initially, hydrocarbon entrapment in the Midale was believed to be controlled by the Mississippian subcrop, with the Burke County production controlled by low-relief structural closure. Petrographic examination of cores and cuttings from the Midale in both Saskatchewan, Canada, and Burke and Bottineau Counties, North Dakota, indicates that production is controlled by facies changes within the unit. Stratigraphic traps are formed by the lateral and vertical changes from grain-supported facies deposited in tidal-channel, subtidal-bar, or beach settings; seals are formed by mud-rich sediments. Use of a transgressive carbonate tidal-flats model best explains current production patterns and indicates substantial potential for additional production in eastern North Dakota and South Dakota.

  13. The parent population of flat-spectrum radio-loud Narrow-Line Seyfert 1 galaxies

    E-Print Network [OSTI]

    Berton, Marco; Ciroi, Stefano; Cracco, Valentina; La Mura, Giovanni; Lister, Matthew L; Mathur, Smita; Peterson, Bradley M; Richards, Joseph L; Rafanelli, Piero

    2015-01-01T23:59:59.000Z

    Flat-spectrum radio-loud Narrow-Line Seyfert 1 galaxies (NLS1s) are a recently discovered class of $\\gamma$-ray emitting Active Galactic Nuclei (AGN), that exhibit some blazar-like properties which are explained with the presence of a relativistic jet viewed at small angles. When blazars are observed at larger angles they appear as radio-galaxies, and we expect to observe an analogue parent population for beamed NLS1s. However, the number of known NLS1s with the jet viewed at large angles is not enough. Therefore, we tried to understand the origin of this deficit. Current hypotheses about the nature of parent sources are steep-spectrum radio-loud NLS1s, radio-quiet NLS1s and disk-hosted radio-galaxies. To test these hypotheses we built three samples of candidate sources plus a control sample, and calculated their black hole mass and Eddington ratio using their optical spectra. We then performed a Kolmogorov-Smirnov statistical test to investigate the compatibility of our different samples with a beamed popula...

  14. Research Program at Maxey Flats and Consideration of Other Shallow Land Burial Sites

    SciTech Connect (OSTI)

    ,

    1981-03-01T23:59:59.000Z

    The Maxey Flats research program is a multidisciplinary, multilaboratory program with the objectives to define the radiochemical and chemical composition of leachates in the burial trenches, define the areal distribution of radionuclides on the site and the factors responsible for this distribution, define the concentrations of radionuclides in vegetation both on and offsite and the uptake of radionuclides by representative agricultural crops, define the atmospheric pathways for radionuclide transport and the mechanisms involved, determine the subsurface migration rates of radionuclides and the chemical, physical, biological, and hydrogeological factors which affect this migration. and evaluate the engineering practices which influence the seepage of surface waters into the burial trenches. The program was initiated in 1979 and a research meeting was held at the Nuclear Regulatory Commission Headquarters on July 16, 1980, to report the research findings of each of the participating laboratories and universities. Important observations from the research are included in the Summary and the results reported for each of the research efforts are summarized in the individual reports that are combined to form this document.

  15. DISCOVERY OF A FLAT-SPECTRUM RADIO NUCLEUS IN NGC 3115

    SciTech Connect (OSTI)

    Wrobel, J. M. [National Radio Astronomy Observatory, P.O. Box O, Socorro, NM 87801 (United States); Nyland, K., E-mail: jwrobel@nrao.edu, E-mail: knyland@nrao.edu [New Mexico Tech, Department of Physics, 801 Leroy Place, Socorro, NM 87801 (United States)

    2012-12-01T23:59:59.000Z

    The early-type galaxy NGC 3115, at a distance of 10.2 Mpc, hosts the nearest billion-solar-mass black hole. Wong et al. recently inferred a substantial Bondi accretion rate near the black hole. Bondi-like accretion is thought to fuel outflows, which can be traced through their radio emission. This paper reports the discovery of a radio nucleus in NGC 3115, with a diameter less than 0.''17 (8.4 pc), a luminosity at 8.5 GHz of 3.1 Multiplication-Sign 10{sup 35} erg s{sup -1}, and a flat spectrum ({alpha} = -0.23 {+-} 0.20, S{proportional_to}{nu}{sup {alpha}}). The radio source coincides with the galaxy's photocenter and candidate X-ray nucleus. The emission is radio loud, suggesting the presence of an outflow on scales less than 10 pc. On such scales, the Bondi accretion could be impeded by heating due to disruption of the outflow.

  16. INCIDENCE OF Mg II ABSORPTION SYSTEMS TOWARD FLAT-SPECTRUM RADIO QUASARS

    SciTech Connect (OSTI)

    Chand, Hum [Aryabhatta Research Institute of Observational Sciences (ARIES), Manora Peak, Nainital 263 129 (India); Gopal-Krishna, E-mail: hum@aries.res.in, E-mail: krishna@ncra.tifr.res.in [NCRA-TIFR, Pune University Campus, Pune 411 007 (India)

    2012-07-20T23:59:59.000Z

    The conventional wisdom that the rate of incidence of Mg II absorption systems, dN/dz (excluding 'associated systems' having a velocity {beta}c relative to the active galactic nucleus (AGN) of less than {approx}5000 km s{sup -1}), is totally independent of the background AGNs has been challenged by a recent finding that dN/dz for strong Mg II absorption systems toward distant blazars is 2.2 {+-} {sup 0.8}{sub 0.6} times the value known for normal optically selected quasars (QSOs). This has led to the suggestion that a significant fraction of even the absorption systems with {beta} as high as {approx}0.1 may have been ejected by the relativistic jets in the blazars, which are expected to be pointed close to our direction. Here, we investigate this scenario using a large sample of 115 flat-spectrum radio-loud quasars (FSRQs) that also possess powerful jets, but are only weakly polarized. We show, for the first time, that dN/dz toward FSRQs is, on the whole, quite similar to that known for QSOs and that the comparative excess of strong Mg II absorption systems seen toward blazars is mainly confined to {beta} < 0.15. The excess relative to FSRQs probably results from a likely closer alignment of blazar jets with our direction; hence, any gas clouds accelerated by them are more likely to be on the line of sight to the active quasar nucleus.

  17. IDENTIFYING BREAKS AND CURVATURE IN THE FERMI SPECTRA OF BRIGHT FLAT SPECTRUM RADIO QUASARS

    SciTech Connect (OSTI)

    Harris, J.; Daniel, M. K.; Chadwick, P. M., E-mail: j.d.harris@durham.ac.uk [Department of Physics, Durham University, South Road, Durham DH1 3LE (United Kingdom)

    2012-12-10T23:59:59.000Z

    Knowing the site of {gamma}-ray emission in active galactic nucleus jets will do much for our understanding of the physics of the source. In particular, if the emission region is close to the black hole then absorption of {gamma}-rays with photons from the broad-line region could become significant. Such absorption is predicted to produce two specific spectral breaks in the {gamma}-ray spectra of Flat Spectrum Radio Quasars (FSRQs). We test this hypothesis using three years of Fermi observations of nine bright FSRQs. A simple power-law fit to the spectrum of each source can be significantly improved by introducing a break, but the break energies are inconsistent with those predicted by the double-absorber model. In some cases the fit can be further improved by a log-parabola. In addition, by dividing the data from each source into two equal epochs we find that the best description of an object's spectrum often varies between a log-parabola and a broken power law.

  18. Calibration of Cotton Planting Mechanisms.

    E-Print Network [OSTI]

    Smith, H. P. (Harris Pearson); Byrom, Mills H. (Mills Herbert)

    1936-01-01T23:59:59.000Z

    per foot. To obtain a perfect stand of one plant to Foot, a minimum of 1 to a maximum of 11 plants per foot wonld have to be thinned out. The number for picker wheel- drop planting mechanisms ranged from a minimum of 2 to a maxi- mum of 27 plants... per foot, requiring the removal of from 1 to 26 nlants per foot to leave one plant per foot. CONTENTS Introduction History of cotton planter development ------------.---------------------------------- Cottonseed planting mechanisms Requirements...

  19. Virginia Nuclear Profile - Power Plants

    U.S. Energy Information Administration (EIA) Indexed Site

    nuclear power plants, summer capacity and net generation, 2010" "Plant nametotal reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State nuclear net...

  20. Ohio Nuclear Profile - Power Plants

    U.S. Energy Information Administration (EIA) Indexed Site

    Ohio nuclear power plants, summer capacity and net generation, 2010" "Plant nametotal reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State nuclear net...

  1. Arkansas Nuclear Profile - Power Plants

    U.S. Energy Information Administration (EIA) Indexed Site

    nuclear power plants, summer capacity and net generation, 2010" "Plant nametotal reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State nuclear net...

  2. Michigan Nuclear Profile - Power Plants

    U.S. Energy Information Administration (EIA) Indexed Site

    nuclear power plants, summer capacity and net generation, 2010" "Plant nametotal reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State nuclear net...

  3. California Nuclear Profile - Power Plants

    U.S. Energy Information Administration (EIA) Indexed Site

    California nuclear power plants, summer capacity and net generation, 2010" "Plant nametotal reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State...

  4. Alabama Nuclear Profile - Power Plants

    U.S. Energy Information Administration (EIA) Indexed Site

    nuclear power plants, summer capacity and net generation, 2010" "Plant nametotal reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State nuclear net...

  5. Texas Nuclear Profile - Power Plants

    U.S. Energy Information Administration (EIA) Indexed Site

    nuclear power plants, summer capacity and net generation, 2010" "Plant nametotal reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State nuclear net...

  6. Pennsylvania Nuclear Profile - Power Plants

    U.S. Energy Information Administration (EIA) Indexed Site

    Pennsylvania nuclear power plants, summer capacity and net generation, 2010" "Plant nametotal reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State...

  7. Tennessee Nuclear Profile - Power Plants

    U.S. Energy Information Administration (EIA) Indexed Site

    Tennessee nuclear power plants, summer capacity and net generation, 2010" "Plant nametotal reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State nuclear...

  8. Georgia Nuclear Profile - Power Plants

    U.S. Energy Information Administration (EIA) Indexed Site

    nuclear power plants, summer capacity and net generation, 2010" "Plant nametotal reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State nuclear net...

  9. Nebraska Nuclear Profile - Power Plants

    U.S. Energy Information Administration (EIA) Indexed Site

    Nebraska nuclear power plants, summer capacity and net generation, 2010" "Plant nametotal reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State nuclear...

  10. Arizona Nuclear Profile - Power Plants

    U.S. Energy Information Administration (EIA) Indexed Site

    nuclear power plants, summer capacity and net generation, 2010" "Plant nametotal reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State nuclear net...

  11. Connecticut Nuclear Profile - Power Plants

    U.S. Energy Information Administration (EIA) Indexed Site

    Connecticut nuclear power plants, summer capacity and net generation, 2010" "Plant nametotal reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State...

  12. Maryland Nuclear Profile - Power Plants

    U.S. Energy Information Administration (EIA) Indexed Site

    nuclear power plants, summer capacity and net generation, 2010" "Plant nametotal reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State nuclear net...

  13. Illinois Nuclear Profile - Power Plants

    U.S. Energy Information Administration (EIA) Indexed Site

    Illinois nuclear power plants, summer capacity and net generation, 2010" "Plant nametotal reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State nuclear...

  14. Florida Nuclear Profile - Power Plants

    U.S. Energy Information Administration (EIA) Indexed Site

    Florida nuclear power plants, summer capacity and net generation, 2010" "Plant nametotal reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State nuclear...

  15. Wisconsin Nuclear Profile - Power Plants

    U.S. Energy Information Administration (EIA) Indexed Site

    Wisconsin nuclear power plants, summer capacity and net generation, 2010" "Plant nametotal reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State nuclear...

  16. Minnesota Nuclear Profile - Power Plants

    U.S. Energy Information Administration (EIA) Indexed Site

    Minnesota nuclear power plants, summer capacity and net generation, 2010" "Plant nametotal reactors","Summer capacity (mw)","Net generation (thousand mwh)","Share of State nuclear...

  17. Nuclear Power Plant Design Project

    E-Print Network [OSTI]

    Nuclear Power Plant Design Project A Response to the Environmental and Economic Challenge Of Global.............................................................................................................. 4 3. Assessment of the Issues and Needs for a New Plant

  18. Preliminary design of the Carrisa Plains solar central receiver power plant. Volume I. Executive summary

    SciTech Connect (OSTI)

    Not Available

    1983-12-31T23:59:59.000Z

    The design of the 30 MWe central receiver solar power plant to be located at Carrisa Plains, San Luis Obispo County, California, is summarized. The plant uses a vertical flat-panel (billboard) solar receiver located at the top of a tower to collect solar energy redirected by approximately 1900 heliostats located to the north of the tower. The solar energy is used to heat liquid sodium pumped from ground level from 610 to 1050/sup 0/F. The power conversion system is a non-reheat system, cost-effective at this size level, and designed for high-efficiency performance in an application requiring daily startup. Successful completion of this project will lead to power generation starting in 1986. This report also discusses plant performance, operations and maintenance, development, and facility cost estimate and economic analysis.

  19. Plant Vascular Biology 2010

    SciTech Connect (OSTI)

    Ding, Biao

    2014-11-17T23:59:59.000Z

    This grant supported the Second International Conference on Plant Vascular Biology (PVB 2010) held July 24-28, 2010 on the campus of Ohio State University, Columbus, Ohio. Biao Ding (Ohio State University; OSU) and David Hannapel (Iowa State University; ISU) served as co-chairs of this conference. Biao Ding served as the local organizer. PVB is defined broadly here to include studies on the biogenesis, structure and function of transport systems in plants, under conditions of normal plant growth and development as well as of plant interactions with pathogens. The transport systems cover broadly the xylem, phloem, plasmodesmata and vascular cell membranes. The PVB concept has emerged in recent years to emphasize the integrative nature of the transport systems and approaches to investigate them.

  20. Geothermal Demonstration Plant

    Office of Scientific and Technical Information (OSTI)

    a 50 W e binary conversion plant at Heber was initiated and is presented herein. Chevron Oil Company (the field operator) predicts that the reservoir i ill decline from an initial...

  1. Plant Operations Executive Director

    E-Print Network [OSTI]

    Awtar, Shorya

    Campus North Campus Recycling Operations Materials Human Resources Payroll Misc Svs Special Projects Planning Spray Shop Glass Shop Upholstery Shop Plant IT Painting Services G. Weincouff Human Resources Business Services Estimating Shutdown Coordination Scheduling L. Rastique Human Resources 67398 M

  2. B Plant facility description

    SciTech Connect (OSTI)

    Chalk, S.E.

    1996-10-04T23:59:59.000Z

    Buildings 225B, 272B, 282B, 282BA, and 294B were removed from the B Plant facility description. Minor corrections were made for tank sizes and hazardous and toxic inventories.

  3. Plant Site Refrigeration Upgrade

    E-Print Network [OSTI]

    Zdrojewski, R.; Healy, M.; Ramsey, J.

    Bayer Corporation operates a multi-division manufacturing facility in Bushy Park, South Carolina. Low temperature refrigeration (-4F) is required by many of the chemical manufacturing areas and is provided by a Plant Site Refrigeration System...

  4. A WRF Simulation of the Impact of 3-D Radiative Transfer on Surface Hydrology over the Rocky Mountains and Sierra Nevada

    SciTech Connect (OSTI)

    Liou, K. N.; Gu, Y.; Leung, Lai-Yung R.; Lee, W- L.; Fovell, R. G.

    2013-12-03T23:59:59.000Z

    We investigate 3-D mountains/snow effects on solar flux distributions and their impact on surface hydrology over the western United States, specifically the Rocky Mountains and Sierra Nevada. The Weather Research and Forecasting (WRF) model, applied at a 30 km grid resolution, is used in conjunction with a 3-D radiative transfer parameterization covering a time period from 1 November 2007 to 31 May 2008, during which abundant snowfall occurred. A comparison of the 3-D WRF simulation with the observed snow water equivalent (SWE) and precipitation from Snowpack Telemetry (SNOTEL) sites shows reasonable agreement in terms of spatial patterns and daily and seasonal variability, although the simulation generally has a positive precipitation bias. We show that 3-D mountain features have a profound impact on the diurnal and monthly variation of surface radiative and heat fluxes, and on the consequent elevation dependence of snowmelt and precipitation distributions. In particular, during the winter months, large deviations (3-DPP, in which PP denotes the plane-parallel approach) of the monthly mean surface solar flux are found in the morning and afternoon hours due to shading effects for elevations below 2.5 km. During spring, positive deviations shift to the earlier morning. Over mountaintops higher than 3 km, positive deviations are found throughout the day, with the largest values of 40-60Wm?2 occurring at noon during the snowmelt season of April to May. The monthly SWE deviations averaged over the entire domain show an increase in lower elevations due to reduced snowmelt, which leads to a reduction in cumulative runoff. Over higher elevation areas, positive SWE deviations are found because of increased solar radiation available at the surface. Overall, this study shows that deviations of SWE due to 3-D radiation effects range from an increase of 18%at the lowest elevation range (1.5-2 km) to a decrease of 8% at the highest elevation range (above 3 km). Since lower elevation areas occupy larger fractions of the land surface, the net effect of 3-D radiative transfer is to extend snowmelt and snowmelt-driven runoff into the warm season. Because 60-90% of water resources originate from mountains worldwide, the aforementioned differences in simulated hydrology due solely to 3-D interactions between solar radiation and mountains/snow merit further investigation in order to understand the implications of modeling mountain water resources, and these resources vulnerability to climate change and air pollution.

  5. Fort Union coals of the northern Rockies and Great Plains: A linchpin toward a new approach to national coal resource assessment

    SciTech Connect (OSTI)

    Flores, R.M.; Stricker, G.D. [Geological Survey, Denver, CO (United States)

    1996-06-01T23:59:59.000Z

    The U.S. Geological Survey recently initiated a 5-year program to assess the Nation`s coal resources, which emphasizes a new approach relating coal quantity and quality. One assessment region includes the northern Rocky Mountains and Great Plains of Wyoming, Montana, and North Dakota, which contains a vast expanse of Paleocene Fort Union coal-bearing rocks that yielded about 30% (>299 million short tons) of the total coal produced (1.03 billion short tons) in the U.S. for 1994. Production is from 14 coal beds/zones (Wyodak-Anderson, Anderson-Dietz, Rosebud, Beulah-Zap, Hagel, Harmon, Ferris Nos. 23, 24, 25, 31, 38, 39, Hanna No. 80, and Deadman seams) mined in the Hanna, Green River, Powder River, and Williston Basins. About 254 million short tons produced from 25 mines are from the Wyodak-Anderson, Anderson-Dietz, and Rosebud coal beds/zones in the Powder River Basin (PRB). These coals are considered as clean and low contaminant compliance coals containing less sulfur and ash (arithmetic mean for sulfur is 0.58% and ash is 7%, as-received basis) than coals produced from other regions in the conterminous U.S. Preliminary elemental analysis of coal samples from the PRB for those hazardous air pollutants (HAPs) named in the Amendments to the 1990 Clean Air Act (including Sb, As, Be, Cd, Cr, Co, Pb, Mn, Hg, Ni, Se, and U), indicates that PRB coals are lower in HAPs contents than other coals from within the region and also other regions in the U.S. Arithmetic means of HAPs contents of these coals are: Sb=0.35, As=3.4, Be=0.6, Cd=0.08, Cr=6.1, Co=1.6, Pb=3.6, Mn=23.5, Hg=0.09, Ni=4.6, Se=0.9, and U=1.1 (in ppm, as-received, and on a whole-coal basis). These coal-quality parameters will be used to delineate coal quantity of the 14 Fort Union coal beds/zones defined in the resource assessment for expanded utilization of coals into the next several decades as controlled by present and future environmental constraints.

  6. Image features for misalignment correction in medical flat-detector CT

    SciTech Connect (OSTI)

    Wicklein, Julia; Kunze, Holger; Kalender, Willi A.; Kyriakou, Yiannis [Institute of Medical Physics, University of Erlangen-Nuernberg, Henkestrasse 91, 91052 Erlangen (Germany); Siemens AG, Healthcare Sector, Siemensstrasse 1, 91301 Forchheim (Germany); Institute of Medical Physics, University of Erlangen-Nuernberg, Henkestrasse 91, 91052 Erlangen (Germany); Siemens AG, Healthcare Sector, Siemensstrasse 1, 91301 Forchheim (Germany)

    2012-08-15T23:59:59.000Z

    Purpose: Misalignment artifacts are a serious problem in medical flat-detector computed tomography. Generally, the geometrical parameters, which are essential for reconstruction, are provided by preceding calibration routines. These procedures are time consuming and the later use of stored parameters is sensitive toward external impacts or patient movement. The method of choice in a clinical environment would be a markerless online-calibration procedure that allows flexible scan trajectories and simultaneously corrects misalignment and motion artifacts during the reconstruction process. Therefore, different image features were evaluated according to their capability of quantifying misalignment. Methods: Projections of the FORBILD head and thorax phantoms were simulated. Additionally, acquisitions of a head phantom and patient data were used for evaluation. For the reconstruction different sources and magnitudes of misalignment were introduced in the geometry description. The resulting volumes were analyzed by entropy (based on the gray-level histogram), total variation, Gabor filter texture features, Haralick co-occurrence features, and Tamura texture features. The feature results were compared to the back-projection mismatch of the disturbed geometry. Results: The evaluations demonstrate the ability of several well-established image features to classify misalignment. The authors elaborated the particular suitability of the gray-level histogram-based entropy on identifying misalignment artifacts, after applying an appropriate window level (bone window). Conclusions: Some of the proposed feature extraction algorithms show a strong correlation with the misalignment level. Especially, entropy-based methods showed very good correspondence, with the best of these being the type that uses the gray-level histogram for calculation. This makes it a suitable image feature for online-calibration.

  7. Parameter constraints for flat cosmologies from CMB and 2dFGRS power spectra

    E-Print Network [OSTI]

    Will J. Percival; Will Sutherland; John A. Peacock; Carlton M. Baugh; Joss Bland-Hawthorn; Terry Bridges; Russell Cannon; Shaun Cole; Matthew Colless; Chris Collins; Warrick Couch; Gavin Dalton; Roberto De Propris; Simon P. Driver; George Efstathiou; Richard S. Ellis; Carlos S. Frenk; Karl Glazebrook; Carole Jackson; Ofer Lahav; Ian Lewis; Stuart Lumsden; Steve Maddox; Stephen Moody; Peder Norberg; Bruce A. Peterson; Keith Taylor

    2002-08-22T23:59:59.000Z

    We constrain flat cosmological models with a joint likelihood analysis of a new compilation of data from the cosmic microwave background (CMB) and from the 2dF Galaxy Redshift Survey (2dFGRS). Fitting the CMB alone yields a known degeneracy between the Hubble constant h and the matter density Omega_m, which arises mainly from preserving the location of the peaks in the angular power spectrum. This `horizon-angle degeneracy' is considered in some detail and shown to follow a simple relation Omega_m h^{3.4} = constant. Adding the 2dFGRS power spectrum constrains Omega_m h and breaks the degeneracy. If tensor anisotropies are assumed to be negligible, we obtain values for the Hubble constant h=0.665 +/- 0.047, the matter density Omega_m=0.313 +/- 0.055, and the physical CDM and baryon densities Omega_c h^2 = 0.115 +/- 0.009, Omega_b h^2 = 0.022 +/- 0.002 (standard rms errors). Including a possible tensor component causes very little change to these figures; we set a upper limit to the tensor-to-scalar ratio of r<0.7 at 95% confidence. We then show how these data can be used to constrain the equation of state of the vacuum, and find w<-0.52 at 95% confidence. The preferred cosmological model is thus very well specified, and we discuss the precision with which future CMB data can be predicted, given the model assumptions. The 2dFGRS power-spectrum data and covariance matrix, and the CMB data compilation used here, are available from http://www.roe.ac.uk/~wjp/

  8. OPTICAL SPECTRA OF CANDIDATE INTERNATIONAL CELESTIAL REFERENCE FRAME (ICRF) FLAT-SPECTRUM RADIO SOURCES

    SciTech Connect (OSTI)

    Titov, O.; Stanford, Laura M. [Geoscience Australia, P.O. Box 378, Canberra, ACT 2601 (Australia); Johnston, Helen M.; Hunstead, Richard W. [Sydney Institute for Astronomy, School of Physics, University of Sydney, NSW 2006 (Australia); Pursimo, T. [Nordic Optical Telescope, Nordic Optical Telescope Apartado 474E-38700 Santa Cruz de La Palma, Santa Cruz de Tenerife (Spain); Jauncey, David L. [CSIRO Astronomy and Space Science, ATNF and Research School of Astronomy and Astrophysics, Australian National University, Canberra, ACT 2611 (Australia); Maslennikov, K. [Central Astronomical Observatory at Pulkovo, Pulkovskoye Shosse, 65/1, 196140, St. Petersburg (Russian Federation); Boldycheva, A., E-mail: oleg.titov@ga.gov.au [Ioffe Physical Technical Institute, 26 Polytekhnicheskaya, St. Petersburg, 194021 (Russian Federation)

    2013-07-01T23:59:59.000Z

    Continuing our program of spectroscopic observations of International Celestial Reference Frame (ICRF) sources, we present redshifts for 120 quasars and radio galaxies. Data were obtained with five telescopes: the 3.58 m European Southern Observatory New Technology Telescope, the two 8.2 m Gemini telescopes, the 2.5 m Nordic Optical Telescope (NOT), and the 6.0 m Big Azimuthal Telescope of the Special Astrophysical Observatory in Russia. The targets were selected from the International VLBI Service for Geodesy and Astrometry candidate International Celestial Reference Catalog which forms part of an observational very long baseline interferometry (VLBI) program to strengthen the celestial reference frame. We obtained spectra of the potential optical counterparts of more than 150 compact flat-spectrum radio sources, and measured redshifts of 120 emission-line objects, together with 19 BL Lac objects. These identifications add significantly to the precise radio-optical frame tie to be undertaken by Gaia, due to be launched in 2013, and to the existing data available for analyzing source proper motions over the celestial sphere. We show that the distribution of redshifts for ICRF sources is consistent with the much larger sample drawn from Faint Images of the Radio Sky at Twenty cm (FIRST) and Sloan Digital Sky Survey, implying that the ultra-compact VLBI sources are not distinguished from the overall radio-loud quasar population. In addition, we obtained NOT spectra for five radio sources from the FIRST and NRAO VLA Sky Survey catalogs, selected on the basis of their red colors, which yielded three quasars with z > 4.

  9. THE LUMINOSITY FUNCTION OF FERMI-DETECTED FLAT-SPECTRUM RADIO QUASARS

    SciTech Connect (OSTI)

    Ajello, M.; Shaw, M. S.; Romani, R. W.; Costamante, L.; Reimer, A. [W. W. Hansen Experimental Physics Laboratory, Kavli Institute for Particle Astrophysics and Cosmology, Department of Physics and SLAC National Accelerator Laboratory, Stanford University, Stanford, CA 94305 (United States); Dermer, C. D. [Space Science Division, Naval Research Laboratory, Washington, DC 20375-5352 (United States); King, O. G.; Max-Moerbeck, W.; Readhead, A.; Richards, J. L.; Stevenson, M., E-mail: majello@slac.stanford.edu, E-mail: msshaw@stanford.edu, E-mail: rwr@astro.stanford.edu [Cahill Center for Astronomy and Astrophysics, California Institute of Technology, Pasadena, CA 91125 (United States)

    2012-06-01T23:59:59.000Z

    Fermi has provided the largest sample of {gamma}-ray-selected blazars to date. In this work we use a complete sample of flat spectrum radio quasars (FSRQs) detected during the first year of operation to determine the luminosity function (LF) and its evolution with cosmic time. The number density of FSRQs grows dramatically up to redshift {approx}0.5-2.0 and declines thereafter. The redshift of the peak in the density is luminosity dependent, with more luminous sources peaking at earlier times; thus the LF of {gamma}-ray FSRQs follows a luminosity-dependent density evolution similar to that of radio-quiet active galactic nuclei. Also, using data from the Swift Burst Alert Telescope we derive the average spectral energy distribution (SED) of FSRQs in the 10 keV-300 GeV band and show that there is no correlation between the luminosity at the peak of the {gamma}-ray emission component and its peak frequency. Using this luminosity-independent SED with the derived LF allows us to predict that the contribution of FSRQs to the Fermi isotropic {gamma}-ray background is 9.3{sup +1.6}{sub -1.0}% ({+-}3% systematic uncertainty) in the 0.1-100 GeV band. Finally we determine the LF of unbeamed FSRQs, finding that FSRQs have an average Lorentz factor of {gamma} = 11.7{sup +3.3}{sub -2.2}, that most are seen within 5 Degree-Sign of the jet axis, and that they represent only {approx}0.1% of the parent population.

  10. Corrective Action Investigation Plan for Corrective Action Unit 98: Frenchman Flat, Nevada Test Site, Nevada (Revision 1)

    SciTech Connect (OSTI)

    USDOE/NV

    1999-07-01T23:59:59.000Z

    This Corrective Action Investigation Plan (CAIP) has been developed for Frenchman Flat Corrective Action Unit (CAU) 98. The Frenchman Flat CAU is located along the eastern border of the Nevada Test Site (NTS) and includes portions of Areas 5 and 11. The Frenchman Flat CAU constitutes one of several areas of the Nevada Test Site used for underground nuclear testing in the past. The nuclear tests resulted in groundwater contamination in the vicinity as well as downgradient of the underground test areas. The CAIP describes the Corrective Action Investigation (CAI) to be conducted at the Frenchman Flat CAU to evaluate the extent of contamination in groundwater due to the underground nuclear testing. The Frenchman Flat CAI will be conducted by the Underground Test Area (UGTA) Project which is a part of the U.S. Department of Energy, Nevada Operations Office (DOE/NV) Environmental Restoration Project. The CAIP is a requirement of the Federal Facility Agreement and Consent Order (FFACO) (1996 ) agreed to by the U.S. Department of Energy (DOE), the Nevada Division of Environmental Protection (NDEP), and the U.S. Department of Defense (DoD). Based on the general definition of a CAI from Section IV.14 of the FFACO, the purpose of the CAI is ''...to gather data sufficient to characterize the nature, extent, and rate of migration or potential rate of migration from releases or discharges of pollutants or contaminants and/or potential releases or discharges from corrective action units identified at the facilities...'' (FFACO, 1996). However, for the Underground Test Area (UGTA) CAUs, ''...the objective of the CAI process is to define boundaries around each UGTA CAU that establish areas that contain water that may be unsafe for domestic and municipal use.'', as stated in Appendix VI of the FFACO (1996). According to the UGTA strategy (Appendix VI of the FFACO), the CAI of a given CAU starts with the evaluation of the existing data. New data collection activities are generally contingent upon the results of the modeling and may or may not be part of the CAI. Such is the case for the Frenchman Flat CAU. The current scope of the Frenchman Flat CAI includes the development and use of a three-dimensional (3-D), numerical, CAU-scale groundwater flow and contaminant transport model to predict the location of the contaminant boundary. The CAU model will be developed and used to predict the location of the contaminant boundary. The scope of this CAI does not currently include any characterization activities; however, such activities will be conducted if the CAU model results indicate that further characterization information is needed to develop a sufficiently reliable CAU model. Two areas of importance to the CAU model are the model area and the investigation area. The CAU-model area will be selected to encompass the Frenchman Flat CAU and the region located immediately downgradient where contamination may migrate. The extent of the CAU-model area is dependent on the extent of contamination and is uncertain at this point. The extent of the investigation area is not expected to increase during the CAI.

  11. New observations of infiltration through fractured alluvium in Yucca Flat, Nevada Test Site: A preliminary field investigation

    SciTech Connect (OSTI)

    Kao, C.S. [California Univ., Berkeley, CA (United States). Dept. of Civil Engineering; Smith, D.K. [Lawrence Livermore National Lab., CA (United States); McKinnis, W.B. [Lawrence Livermore National Lab., Mercury, NV (United States)

    1994-02-01T23:59:59.000Z

    Regional tectonics coupled with the subsurface detonation of nuclear explosives has caused widespread fracturing of the alluvium of Yucca Flat. Fractures deeper than 30 meters have been observed in boreholes. Some of these fractures are large enough to capture significant amounts of runoff during storm events. Evidence of stream capture by fractures and observations of runoff flowing into open fractures give qualitative evidence of infiltration to depths greater than several meters and possibly to the saturated zone. Our field observations contradict the assumption that little infiltration occurs on Yucca Flat. The larger, hydrologically important fractures are associated with geologic faults or the regional stress field. Additional field studies are needed to investigate the impact of fractures on the transport of contaminants.

  12. Water-Chemistry Evolution and Modeling of Radionuclide Sorption and Cation Exchange during Inundation of Frenchman Flat Playa

    SciTech Connect (OSTI)

    Hershey, Ronald; Cablk, Mary; LeFebre, Karen; Fenstermaker, Lynn; Decker, David

    2013-08-01T23:59:59.000Z

    Atmospheric tests and other experiments with nuclear materials were conducted on the Frenchman Flat playa at the Nevada National Security Site, Nye County, Nevada; residual radionuclides are known to exist in Frenchman Flat playa soils. Although the playa is typically dry, extended periods of winter precipitation or large single-event rainstorms can inundate the playa. When Frenchman Flat playa is inundated, residual radionuclides on the typically dry playa surface may become submerged, allowing water-soil interactions that could provide a mechanism for transport of radionuclides away from known areas of contamination. The potential for radionuclide transport by occasional inundation of the Frenchman Flat playa was examined using geographic information systems and satellite imagery to delineate the timing and areal extent of inundation; collecting water samples during inundation and analyzing them for chemical and isotopic content; characterizing suspended/precipitated materials and archived soil samples; modeling water-soil geochemical reactions; and modeling the mobility of select radionuclides under aqueous conditions. The physical transport of radionuclides by water was not evaluated in this study. Frenchman Flat playa was inundated with precipitation during two consecutive winters in 2009-2010 and 2010-2011. Inundation allowed for collection of multiple water samples through time as the areal extent of inundation changed and ultimately receded. During these two winters, precipitation records from a weather station in Frenchman Flat (Well 5b) provided information that was used in combination with geographic information systems, Landsat imagery, and image processing techniques to identify and quantify the areal extent of inundation. After inundation, water on the playa disappeared quickly, for example, between January 25, 2011 and February 10, 2011, a period of 16 days, 92 percent of the areal extent of inundation receded (2,062,800 m2). Water sampling provided valuable information about chemical processes occurring during inundation as the water disappeared. Important observations from water-chemistry analyses included: 1) total dissolved solids (TDS) and chloride ion (Cl-) concentrations were very low (TDS: < 200 mg/L and Cl-: < 3.0 mg/L, respectively) for all water samples regardless of time or areal extent; 2) all dissolved constituents were at concentrations well below what might be expected for evaporating shallow surface waters on a playa, even when 98 to 99 percent of the water had disappeared; 3) the amount of evaporation for the last water samples collected at the end of inundation, estimated with the stable isotopic ratios ?2H or ?18O, was approximately 60 percent; and 4) water samples analyzed by gamma spectroscopy did not show any man-made radioactivity; however, the short scanning time (24 hours) and relative chemical diluteness of the water samples (TDS ranged between 39 and 190 mg/L) may have contributed to none being detected. Additionally, any low-energy beta emitting radionuclides would not have been detected by gamma spectroscopy. From these observations, it was apparent that a significant portion of water on the playa did not evaporate, but rather infiltrated into the subsurface (approximately 40 percent). Consistent with this water chemistry-based conclusion is particle-size analysis of two archived Frenchman Flat playa soils samples, which showed low clay content in the near surface soil that also suggested infiltration. Infiltration of water from the playa during inundation into the subsurface does not necessarily imply that groundwater recharge is occurring, but it does provide a mechanism for moving residual radionuclides downward into the subsurface of Frenchman Flat playa. Water-mineral geochemical reactions were modeled so that changes in the water chemistry could be identified and the extent of reactions quantified. Geochemical modeling showed that evaporation; equilibrium with atmospheric carbon dioxide and calcite; dissolution of sodium chloride, gypsum, and composite volcanic g

  13. Letter Report: Yucca Mountain Environmental Monitoring Systems Initiative - Air Quality Scoping Study for Crater Flat, Nye County, Nevada

    SciTech Connect (OSTI)

    J. Engelbrecht; I. Kavouras; D. Campbell; S. Campbell; S. Kohl; D. Shafer

    2008-08-01T23:59:59.000Z

    The Desert Research Institute (DRI) is performing a scoping study as part of the U.S. Department of Energy's Yucca Mountain Environmental Monitoring Systems Initiative (EMSI). The main objective is to obtain baseline air quality information for Yucca Mountain and an area surrounding the Nevada Test Site (NTS). Air quality and meteorological monitoring and sampling equipment housed in a mobile trailer (shelter) (cover page figure) is collecting data at eight sites outside the NTS, including Ash Meadows National Wildlife Refuge (NWR), Beatty, Sarcobatus Flats, Rachel, Caliente, Pahranagat NWR, Crater Flat, and Tonopah Airport, and at four sites on the NTS (Engelbrecht et al., 2007a-d). The trailer is stationed at any one site for approximately eight weeks at a time. This letter report provides a summary of air quality and meteorological data, on completion of the site's sampling program.

  14. Letter Report Yucca Mountain Environmental Monitoring Systems Initiative - Air Quality Scoping Study for Crater Flat, Nye County, Nevada

    SciTech Connect (OSTI)

    J. Engelbrecht; I. Kavouras; D. Campbell; S.Campbell; S. Kohl; D. Shafer

    2009-04-02T23:59:59.000Z

    The Desert Research Institute (DRI) is performing a scoping study as part of the U.S. Department of Energy's Yucca Mountain Environmental Monitoring Systems Initiative (EMSI). The main objective is to obtain baseline air quality information for Yucca Mountain and an area surrounding the Nevada Test Site (NTS). Air quality and meteorological monitoring and sampling equipment housed in a mobile trailer (shelter) (cover page figure) is collecting data at eight sites outside the NTS, including Ash Meadows National Wildlife Refuge (NWR), Beatty, Sarcobatus Flats, Rachel, Caliente, Pahranagat NWR, Crater Flat, and Tonopah Airport, and at four sites on the NTS (Engelbrecht et al., 2007a-d). The trailer is stationed at any one site for approximately eight weeks at a time. This letter report provides a summary of air quality and meteorological data, on completion of the site's sampling program.

  15. Atomically flat La-silicate/Si interface using tungsten carbide gate electrode with nano-sized grain

    SciTech Connect (OSTI)

    Tuokedaerhan, K.; Natori, K.; Iwai, H. [Frontier Research Center, Tokyo Institute of Technology, 4259 Nagatsuta, Midori-ku, Yokohama 226-8503 (Japan); Kakushima, K., E-mail: kakushima@ep.titech.ac.jp; Kataoka, Y.; Nishiyama, A.; Sugii, N.; Wakabayashi, H.; Tsutsui, K. [Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology, 4259 Nagatsuta, Midori-ku, Yokohama 226-8502 (Japan)

    2014-01-13T23:59:59.000Z

    Interface properties of La-silicate gate dielectrics on Si substrates with W or nano-sized grain W{sub 2}C gate electrodes have been investigated. A low interface state density of 2.5??10{sup 11}?cm{sup ?2}/eV has been achieved with W{sub 2}C gate electrodes, which is one third of those with W gate electrode. An interface roughness of 0.33?nm with spatial frequency comparable to the grain size of W gate electrode has been observed. Besides, an atomically flat interface of 0.12?nm has been obtained with W{sub 2}C gate electrode. The origin of flat interface may be attributed to the elimination of inhomogeneous stress by grains in metal electrode.

  16. PUBLISHED ONLINE: 1 MAY 2011 | DOI: 10.1038/NMAT3013 High-performance flat-panel solar thermoelectric

    E-Print Network [OSTI]

    Huang, Jianyu

    by mechanical heat engines in large power plants, and household heat supply by means of solar hot-water systems

  17. Environmental assessment, finding of no significant impact, and response to comments. Radioactive waste storage

    SciTech Connect (OSTI)

    NONE

    1996-04-01T23:59:59.000Z

    The Department of Energy`s (DOE) Rocky Flats Environmental Technology Site (the Site), formerly known as the Rocky Flats Plant, has generated radioactive, hazardous, and mixed waste (waste with both radioactive and hazardous constituents) since it began operations in 1952. Such wastes were the byproducts of the Site`s original mission to produce nuclear weapons components. Since 1989, when weapons component production ceased, waste has been generated as a result of the Site`s new mission of environmental restoration and deactivation, decontamination and decommissioning (D&D) of buildings. It is anticipated that the existing onsite waste storage capacity, which meets the criteria for low-level waste (LL), low-level mixed waste (LLM), transuranic (TRU) waste, and TRU mixed waste (TRUM) would be completely filled in early 1997. At that time, either waste generating activities must cease, waste must be shipped offsite, or new waste storage capacity must be developed.

  18. Telephone Flat Geothermal Development Project Environmental Impact Statement Environmental Impact Report. Final: Comments and Responses to Comments

    SciTech Connect (OSTI)

    None

    1999-02-01T23:59:59.000Z

    This document is the Comments and Responses to Comments volume of the Final Environmental Impact Statement and Environmental Impact Report prepared for the proposed Telephone Flat Geothermal Development Project (Final EIS/EIR). This volume of the Final EIS/EIR provides copies of the written comments received on the Draft EIS/EIR and the leady agency responses to those comments in conformance with the requirements of the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA).

  19. Convective currents in nucleate pool boiling and their effects on the heat flux from varying diameter flat plate heating elements

    E-Print Network [OSTI]

    Morford, Peter Stephen

    1980-01-01T23:59:59.000Z

    investigation was conducred to amine the effects of convection currents in nucleate oool boil ing and to determine the changes in critical heat flux caused by varying the diameter of horizontal flat olate heating surfaces. Freon 113 (Trichlorotrifluoroethane... by high energy costs and thc need to economize in industrial heat transfer applications . I'nucleate boiling is a very efficient neans of heat transfer because of the large sur ace areas involved in vaporization of the bulk fluid. as bubbles form...

  20. Review and reconnaissance of the hydrogeology of Tertiary sedimentary rocks in the vicinity of Frenchman Flat, Nevada Test Site

    SciTech Connect (OSTI)

    Prothro, L.B.; Drellack, S.L. Jr.

    1997-09-01T23:59:59.000Z

    Work is currently underway within the Underground Test Area (UGTA) subproject of the US Department of Energy/Nevada Operations Office Environmental Restoration Program to develop corrective action plans in support of the overall corrective action strategy for the Nevada Test Site (NTS) as established in the Federal Facility Agreement and Consent Order (FFACO, 1996). A closure plan is currently being developed for Frenchman Flat, which has been identified in the FFACO as a Corrective Action Unit (CAU). Part of this effort requires that hydrogeologic data be compiled for inclusion in a CAU-specific hydrologic flow and transport model that will be used to predict contaminant boundaries. Hydrogeologic maps and cross sections are currently being prepared for use in the model to define the nature and extent of aquifers and confining units that might influence the flow of contaminated groundwater from underground nuclear tests conducted in Frenchman Flat. During this effort, it has been found that older Tertiary-age sediments might be hydrogeologically important in the Frenchman Flat model area. Although the character and extent of these units are poorly known, there is reason to believe that in some parts of Frenchman Flat they may lie between the regional Lower Carbonate Aquifer (LCA) and the younger Tertiary saturated alluvium and volcanic units in which several underground nuclear tests were conducted. It was not possible to quickly determine their extent, or ascertain whether or not these units might act as confining units or aquifers. The work described in this report was done to gain a better understanding of the hydrogeology of these rocks.