National Library of Energy BETA

Sample records for roadway luminaires webcast

  1. Text-Alternative Version: Model Specification for LED Roadway Luminaires Webcast

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "Model Specification for LED Roadway Luminaires" webcast, held November 15, 2011.

  2. Text-Alternative Version: Successful Selection of LED Streetlight Luminaires Webcast

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "Successful Selection of LED Streetlight Luminaires" webcast, held March 6, 2013.

  3. Model Specification for LED Roadway Luminaires, V2.0

    Broader source: Energy.gov [DOE]

    Version 2.0 of the Model Specification for LED Roadway Luminaires is now available. Changes are substantial and include streamlined structure and formatting, new diagrams, updated references, and leveraging of LED Lighting Facts® program guidance.

  4. CALiPER Round 11 Test Results Webcast | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    11 Test Results Webcast CALiPER Round 11 Test Results Webcast In this February 8, 2011 webcast, Mia Paget of the Pacific Northwest National Laboratory provided the results of each CALiPER round with a "snapshot" of SSL technology status, identifying market trends and issues related to SSL product performance. Round 11 looked at five applications: arm-mounted roadway luminaires, post-top roadway luminaires, linear replacement lamps, high-bay luminaires, and small replacement lamps. View

  5. Model Specification for LED Roadway Luminaires Webcast | Department...

    Energy Savers [EERE]

    how it can be customized to meet the particular needs of individual organizations in order to help them put together effective bid documents for LED street lighting products. ...

  6. Successful Selection of LED Streetlight Luminaires: Optimizing...

    Broader source: Energy.gov (indexed) [DOE]

    This March 6, 2013 webcast reviewed the factors involved in successful selection of LED streetlight luminaires. Presenters Eric Haugaard of Cree Lighting and Chad Stalker of ...

  7. Successful Selection of LED Streetlight Luminaires: Optimizing Illumination

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Economic Performance | Department of Energy Webcasts » Successful Selection of LED Streetlight Luminaires: Optimizing Illumination and Economic Performance Successful Selection of LED Streetlight Luminaires: Optimizing Illumination and Economic Performance This March 6, 2013 webcast reviewed the factors involved in successful selection of LED streetlight luminaires. Presenters Eric Haugaard of Cree Lighting and Chad Stalker of Philips Lumileds guided participants through the modeling of

  8. Text-Alternative Version: SSL Luminaire Performance in the Lab: Just How Well Do They Perform?

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the SSL Luminaire Performance in the Lab: Just How Well Do They Perform webcast.

  9. Hitting the Target: ENERGY STAR® SSL Outdoor Area Lighting Webcast

    Broader source: Energy.gov [DOE]

    In this October 8, 2009 webcast, ENERGY STAR Program Manager Richard Karney gave an overview of ENERGY STAR criteria covering SSL-based outdoor area and roadway lighting, outdoor wall packs,...

  10. Demonstration Assessment of LED Roadway Lighting: Philadelphia, PA

    Office of Scientific and Technical Information (OSTI)

    (Technical Report) | SciTech Connect Demonstration Assessment of LED Roadway Lighting: Philadelphia, PA Citation Details In-Document Search Title: Demonstration Assessment of LED Roadway Lighting: Philadelphia, PA For this demonstration assessment, 10 different groups of LED luminaires were installed at three sites in Philadelphia, PA. Each of the three sites represented a different set of conditions, most importantly with regard to the incumbent HPS luminaires, which were nominally 100 W,

  11. Webcasts | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Webcasts Webcasts End users interested in combined heat and power (CHP) can participate in free webcasts made available to them through various resources, including those listed below. View presentations and documents from previous webinars and webcasts "Combined Heat and Power: Expanding CHP in Your State" was held on December 4, 2013. View the archived webinar. "CHP: Enabling Resilient Energy Infrastructure" was held on April 3, 2013. Access the presentations. View the

  12. Thermal trim for luminaire

    DOE Patents [OSTI]

    Bazydola, Sarah; Ghiu, Camil-Daniel; Harrison, Robert; Jeswani, Anil

    2013-11-19

    A luminaire with a thermal pathway to reduce the junction temperature of the luminaire's light source, and methods for so doing, are disclosed. The luminaire includes a can, a light engine, and a trim, that define a substantially continuous thermal pathway from the light engine to a surrounding environment. The can defines a can cavity and includes a can end region. The light engine is within the can cavity and includes a light source and a heat sink, including a heat sink end region, coupled thereto. The trim is at least partially disposed within the can cavity and includes a first trim end region coupled to the heat sink end region and a second trim end region coupled to the can end region. Thermal interface material may be located between: the heat sink and the trim, the trim and the can, and/or the heat sink and the light source.

  13. Next Generation Luminaires Design Competition Announces 2013...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Next Generation Luminaires Design Competition Announces 2013 Outdoor Winners Next Generation Luminaires Design Competition Announces 2013 Outdoor Winners February 27, 2014 -...

  14. Next Generation Luminaire (NGL) Downlight Demonstration Project...

    Energy Savers [EERE]

    Luminaire (NGL) Downlight Demonstration Project: St. Anthony's Hospital Next Generation Luminaire (NGL) Downlight Demonstration Project: St. Anthony's Hospital The U.S. DOE ...

  15. Report 23: Photometric Testing of White Tunable LED Luminaires...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Report 23: Photometric Testing of White Tunable LED Luminaires Report 23: Photometric Testing of White Tunable LED Luminaires PDF icon caliper23white-tunable-led-luminaires.pdf ...

  16. Report 23: Photometric Testing of White Tunable LED Luminaires...

    Energy Savers [EERE]

    3: Photometric Testing of White Tunable LED Luminaires Report 23: Photometric Testing of White Tunable LED Luminaires PDF icon caliper23white-tunable-led-luminaires.pdf More ...

  17. Model Specification for LED Roadway Luminaires | Department of Energy

    Energy Savers [EERE]

    U.S. Department of Energy National Science Bowl | Department of Energy Mira Loma High School and Hopkins Junior High School from California Win U.S. Department of Energy National Science Bowl Mira Loma High School and Hopkins Junior High School from California Win U.S. Department of Energy National Science Bowl May 4, 2009 - 12:00am Addthis WASHINGTON, DC - High school and middle school teams from California won the 2009 U.S. Department of Energy (DOE) National Science Bowl® today at the

  18. Covered Product Category: Fluorescent Luminaires | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Luminaires," using IESNA LM-41, ANSI C82.2-2002 for fluorescent ballasts, and ANSI C78.81-2005 for fluorescent lamps. Finding the Luminaire Efficacy Rating LERs should be...

  19. Thermal trim for a luminaire

    DOE Patents [OSTI]

    Bazydola, Sarah; Ghiu, Camil-Daniel; Harrison, Robert; Jeswani, Anil

    2013-02-19

    A luminaire with a thermal pathway to reduce the junction temperature of the luminaire's light source, and methods for so doing, are disclosed. The luminaire includes a can, a light engine, and a trim, that define a substantially continuous thermal pathway from the light engine to a surrounding environment. The can defines a can cavity and includes a can end region. The light engine is within the can cavity and includes a light source and a heat sink, including a heat sink end region, coupled thereto. The trim is at least partially disposed within the can cavity and includes a first trim end region coupled to the heat sink end region and a second trim end region coupled to the can end region. Thermal interface material may be located between: the heat sink and the trim, the trim and the can, and/or the heat sink and the light source.

  20. Solid-State Lighting Webcasts

    SciTech Connect (OSTI)

    2011-12-16

    Links to past webcast presentations related to solid-state lighting, including presentation slides and question-and-answer sessions, where available.

  1. Webcast of Engaging Students in Energy

    Broader source: Energy.gov [DOE]

    On December 13th, the Department of Energy and its collaborators held a live webcast on "Engaging Students in Energy." The presentation and webcast are available below.

  2. Covered Product Category: Fluorescent Luminaires

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including fluorescent luminaires. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  3. LED Luminaire Lifetime: Recommendations For Testing and Reporting |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Luminaire Lifetime: Recommendations For Testing and Reporting LED Luminaire Lifetime: Recommendations For Testing and Reporting LED Luminaire Lifetime: September 2014 (774.47 KB) More Documents & Publications System Reliability Model for Solid-State Lighting Luminaires LED LUMINAIRE LIFETIME: Recommendations for Testing and Reporting Lifetime and Reliability

  4. Demonstration Assessment of LED Roadway Lighting: NE Cully Boulevard Portland, OR

    SciTech Connect (OSTI)

    Royer, Michael P.; Poplawski, Michael E.; Tuenge, Jason R.

    2012-06-29

    A new roadway lighting demonstration project was initiated in late 2010, which was planned in conjunction with other upgrades to NE Cully Boulevard, a residential collector road in the northeast area of Portland, OR. With the NE Cully Boulevard project, the Portland Bureau of Transportation hoped to demonstrate different light source technologies and different luminaires side-by-side. This report documents the initial performance of six different newly installed luminaires, including three LED products, one induction product, one ceramic metal halide product, and one high-pressure sodium (HPS) product that represented the baseline solution. It includes reported, calculated, and measured performance; evaluates the economic feasibility of each of the alternative luminaires; and documents user feedback collected from a group of local Illuminating Engineering Society (IES) members that toured the site. This report does not contain any long-term performance evaluations or laboratory measurements of luminaire performance. Although not all of the installed products performed equally, the alternative luminaires generally offered higher efficacy, more appropriate luminous intensity distributions, and favorable color quality when compared to the baseline HPS luminaire. However, some products did not provide sufficient illumination to all areas—vehicular drive lanes, bicycle lanes, and sidewalks—or would likely fail to meet design criteria over the life of the installation due to expected depreciation in lumen output. While the overall performance of the alternative luminaires was generally better than the baseline HPS luminaire, cost remains a significant barrier to widespread adoption. Based on the cost of the small quantity of luminaires purchased for this demonstration, the shortest calculated payback period for one of the alternative luminaire types was 17.3 years. The luminaire prices were notably higher than typical prices for currently available luminaires

  5. Outdoor OLED Luminaire Using Solar Energy for Lighting Pedestrian...

    Office of Environmental Management (EM)

    Outdoor OLED Luminaire Using Solar Energy for Lighting Pedestrian Areas Outdoor OLED Luminaire Using Solar Energy for Lighting Pedestrian Areas Lead Performer: OLEDWorks LLC - ...

  6. OLED Luminaire with Panel Integrated Drivers and Advanced Controls...

    Broader source: Energy.gov (indexed) [DOE]

    DC current drivers integrated with each panel, and a base station that interfaces with ... More Documents & Publications High-Performance OLED Panel and Luminaire Luminaires for ...

  7. LED LUMINAIRE LIFETIME: Recommendations for Testing and Reporting...

    Energy Savers [EERE]

    More Documents & Publications System Reliability Model for Solid-State Lighting Luminaires LED Luminaire Lifetime: Recommendations For Testing and Reporting System Reliability ...

  8. Next Generation Luminaires Design Competition Announces 2015...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    based on color, illuminance, glare control, light distribution, serviceability, ... for Versatility for its Olivio LED Sistema 2 LED pole-mounted pedestrian-scale luminaire. ...

  9. RTI International Develops SSL Luminaire Reliability Model |...

    Broader source: Energy.gov (indexed) [DOE]

    life testing (ALT) methodologies and a reliability model for predicting the lifetime of ... is not a proxy for luminaire reliability, and that a systems-level approach ...

  10. Technical Feasibility Assessment of LED Roadway Lighting on the Golden Gate Bridge

    SciTech Connect (OSTI)

    Tuenge, Jason R.

    2012-09-01

    Subsequent to preliminary investigations by the Golden Gate Bridge Highway & Transportation District (GGB), in coordination with Pacific Gas & Electric (PG&E), the GATEWAY Demonstration program was asked to evaluate the technical feasibility of replacing existing roadway lighting on the bridge with products utilizing LED technology. GGB and PG&E also indicated interest in induction (i.e., electrodeless fluorescent) technology, since both light source types feature rated lifetimes significantly exceeding those of the existing high-pressure sodium (HPS) and low-pressure sodium (LPS) products. The goal of the study was to identify any solutions which would reduce energy use and maintenance without compromising the quantity or quality of existing illumination. Products used for roadway lighting on the historic bridge must be installed within the existing amber-lensed shoebox-style luminaire housings. It was determined that induction technology does not appear to represent a viable alternative for the roadway luminaires in this application; any energy savings would be attributable to a reduction in light levels. Although no suitable LED retrofit kits were identified for installation within existing luminaire housings, several complete LED luminaires were found to offer energy savings of 6-18%, suggesting custom LED retrofit kits could be developed to match or exceed the performance of the existing shoeboxes. Luminaires utilizing ceramic metal halide (CMH) were also evaluated, and some were found to offer 28% energy savings, but these products might actually increase maintenance due to the shorter rated lamp life. Plasma technology was evaluated, as well, but no suitable products were identified. Analysis provided in this report was completed in May 2012. Although LED technologies are expected to become increasingly viable over time, and product mock-ups may reveal near-term solutions, some options not currently considered by GGB may ultimately merit evaluation. For

  11. Recovery Act Funding Opportunities Webcast

    Broader source: Energy.gov [DOE]

    On this page you will find a Webcast that was presented by the U.S. Department of Energy's Geothermal TechnologiesOffice (GTO) (formerly Geothermal Technologies Program) to help the U.S....

  12. Covered Product Category: Light Fixtures (Luminaires) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Covered Product Category: Light Fixtures (Luminaires) Covered Product Category: Light Fixtures (Luminaires) The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for light fixtures or luminaires. The luminaires product category is very broad and covers a wide variety of lighting products. Both ENERGY STAR and FEMP provide programmatic guidance for various types of luminaires. See Table 2 for more information about which types of

  13. Webcast: Evaluating LED Street Lighting Solutions

    Broader source: Energy.gov [DOE]

    In this July 20, 2010 webcast, Edward Smalley of Seattle City Light provided an update on DOE Municipal Solid-State Street Lighting Consortium activities. The webcast also presented perspectives...

  14. Tuesday Webcasts for Industry | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tuesday Webcasts for Industry Tuesday Webcasts for Industry Learn about AMO's software tools, technologies, partnership opportunities, and other resources by watching the Tuesday Webcasts for Industry. They are held on the first Tuesday of every month from 2:00 to 3:00 p.m. Eastern time and are presented by manufacturers, AMO staff, and industry experts. Register to participate in upcoming Tuesday webcasts by visiting the AMO Events Calendar or Training Calendar. Each entry includes the

  15. Covered Product Category: Light Fixtures (Luminaires)

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including luminaires, or light fixtures. The luminaires product category is very broad and covers a wide variety of lighting products. Both ENERGY STAR® and FEMP provide programmatic guidance for various types of luminaires. See table 2 for more information about which types of light fixtures are covered by which program (FEMP or ENERGY STAR). Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  16. Next Generation Luminaires Design Competition Announces 2014...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in Class for its Slot 2 & 4 LED-Direct and Bi-Direct family of surface mounted and pendant linear luminaires. More information on all the winning entries is available at http:...

  17. LED Replacements for Linear Fluorescent Lamps Webcast

    Broader source: Energy.gov [DOE]

    In this June 20, 2011 webcast on LED products marketed as replacements for linear fluorescent lamps, Jason Tuenge of the Pacific Northwest National Laboratory (PNNL) discussed current Lighting...

  18. Demonstration Assessment of LED Roadway Lighting: Philadelphia...

    Office of Scientific and Technical Information (OSTI)

    LED Roadway Lighting: Philadelphia, PA Royer, Michael P.; Tuenge, Jason R.; Poplawski, Michael E. Roadway Lighting; Solid-state lighting; LED lighting; SSL; LED; GATEWAY Roadway...

  19. Integrated Energy Systems Multi-Media Webcast: Three CHP Sites...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Multi-Media Webcast: Three CHP Sites Yield Important Lessons Learned, September 2005 Integrated Energy Systems Multi-Media Webcast: Three CHP Sites Yield Important Lessons Learned, ...

  20. Next Generation Luminaires: Recognizing Innovative, Energy-Efficient Commercial Lighting Luminaires

    SciTech Connect (OSTI)

    2013-04-01

    Fact sheet that describes the Next Generation Luminaires SSL lighting design competition, which recognizes excellence in technical innovation and design of high-quality, energy-efficient commercial lighting, both indoor and outdoor.

  1. Insights into accelerated aging of SSL luminaires

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Davis, J. Lynn; Lamvik, Michael; Bittle, James; Shepherd, Sarah; Yaga, Robert; Baldasaro, Nick; Solano, Eric; Bobashev, Georgiy

    2013-09-30

    Although solid-state lighting (SSL) products are often intended to have product lifetimes of 15 years or more, the rapid change in technology has created a need for accelerated life tests (ALTs) that can be performed in the span of several months. A critical element of interpreting results from any systems-level ALT is understanding of the impact of the test environment on each component. Because of its ubiquity in electronics, the use of temperature-humidity environments as potential ALTs for SSL luminaires was investigated. Results from testing of populations of three commercial 6” downlights in environments of 85oC and 85% relative humiditymore » (RH) and 75oC and 75% RH are reported. These test environments were found to accelerate lumen depreciation of the entire luminaire optical system, including LEDs, lenses, and reflectors. The effects of aging were found to depend strongly on both the optical materials that were used and the design of the luminaire; this shows that the lumen maintenance behavior of SSL luminaires must be addressed at the optical systems level. Temperature-Humidity ALTs can be a useful test in understand lumainaire depreciation provided that proper consideration is given to the different aging rates of various materials. Since the impact of the temperature-humidity environment varies among components of the optical system, uniform aging of all system components in a single test is difficult to achieve.« less

  2. Insights into accelerated aging of SSL luminaires

    SciTech Connect (OSTI)

    Davis, J. Lynn; Lamvik, Michael; Bittle, James; Shepherd, Sarah; Yaga, Robert; Baldasaro, Nick; Solano, Eric; Bobashev, Georgiy

    2013-09-30

    Although solid-state lighting (SSL) products are often intended to have product lifetimes of 15 years or more, the rapid change in technology has created a need for accelerated life tests (ALTs) that can be performed in the span of several months. A critical element of interpreting results from any systems-level ALT is understanding of the impact of the test environment on each component. Because of its ubiquity in electronics, the use of temperature-humidity environments as potential ALTs for SSL luminaires was investigated. Results from testing of populations of three commercial 6 downlights in environments of 85oC and 85% relative humidity (RH) and 75oC and 75% RH are reported. These test environments were found to accelerate lumen depreciation of the entire luminaire optical system, including LEDs, lenses, and reflectors. The effects of aging were found to depend strongly on both the optical materials that were used and the design of the luminaire; this shows that the lumen maintenance behavior of SSL luminaires must be addressed at the optical systems level. Temperature-Humidity ALTs can be a useful test in understand lumainaire depreciation provided that proper consideration is given to the different aging rates of various materials. Since the impact of the temperature-humidity environment varies among components of the optical system, uniform aging of all system components in a single test is difficult to achieve.

  3. Long-term Testing Results for the 2008 Installation of LED Luminaires at the I-35 West Bridge in Minneapolis

    SciTech Connect (OSTI)

    Kinzey, Bruce R.; Davis, Robert G.

    2014-09-30

    This document reports the long-term testing results from an extended GATEWAY project that was first reported in “Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting at the I-35W Bridge, in Minneapolis, MN,” August 2009. That original report presented the results of lighting the newly reconstructed I 35W Bridge using LEDs in place of conventional high-pressure sodium (HPS) roadway luminaires, comparing energy use and illuminance levels with a simulated baseline condition. That installation was an early stage implementation of LED lighting and remains one of the oldest installations in continued operation today. This document provides an update of the LED system’s performance since its installation in September 2008.

  4. Next Generation Luminaires Design Competition Announces 2013 Outdoor

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Winners | Department of Energy Next Generation Luminaires Design Competition Announces 2013 Outdoor Winners Next Generation Luminaires Design Competition Announces 2013 Outdoor Winners February 27, 2014 - 12:00am Addthis The 2013 winners in the outdoor category of the Next Generation LuminairesTM Solid-State Lighting Design Competition were announced at the Strategies in Light conference in Santa Clara, CA. Sponsored by DOE, the Illuminating Engineering Society of North America, and the

  5. Covered Product Category: Industrial Luminaires (High/Low Bay) | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Industrial Luminaires (High/Low Bay) Covered Product Category: Industrial Luminaires (High/Low Bay) The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for Industrial Luminaires (High/Low Bay). Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law. Meeting Energy Efficiency Requirements for Industrial

  6. Purchasing Energy-Efficient Ceiling-Mounted Fluorescent Luminaires |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Ceiling-Mounted Fluorescent Luminaires Purchasing Energy-Efficient Ceiling-Mounted Fluorescent Luminaires The Federal Energy Management Program (FEMP) provides acquisition guidance for ceiling-mounted fluorescent luminaires, a product category covered by FEMP efficiency requirements. Federal laws and requirements mandate that agencies purchase ENERGY STAR-qualified or FEMP-designated products in all product categories covered by these programs and in any acquisition

  7. Purchasing Energy-Efficient Commercial and Industrial LED Luminaires |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Commercial and Industrial LED Luminaires Purchasing Energy-Efficient Commercial and Industrial LED Luminaires The Federal Energy Management Program (FEMP) provides acquisition guidance for commercial and industrial light emitting diode (LED) luminaires, a product category covered by FEMP efficiency requirements. Federal laws and requirements mandate that agencies purchase ENERGY STAR-qualified or FEMP-designated products in all product categories covered by these

  8. Purchasing Energy-Efficient Suspended Fluorescent Luminaires | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Products & Technologies » Energy-Efficient Products » Purchasing Energy-Efficient Suspended Fluorescent Luminaires Purchasing Energy-Efficient Suspended Fluorescent Luminaires The Federal Energy Management Program (FEMP) provides acquisition guidance for suspended fluorescent luminaires, a product category covered by FEMP efficiency requirements. Federal laws and requirements mandate that agencies purchase ENERGY STAR-qualified or FEMP-designated products in all product

  9. Low-Cost LED Luminaire for General Illumination

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... costly heat sinks * Luminaire: Diffusing optics yielding system optical efficiency > 95% ... optical efficiency (> 95%) of diffuser optics in full-scale assembled troffer ...

  10. Webcast of the Renewable Energy Competency Model

    Broader source: Energy.gov [DOE]

    The Department of Energy held a webcast titled ""Renewable Energy Competency Model: An Aid to Build a Renewable Energy Skilled Workforce"" on Monday, October 22, 2012. The Renewable Energy...

  11. Watershed Academy Webcast on Climate Resilience

    Office of Energy Efficiency and Renewable Energy (EERE)

    "Climate Resilience: What to Expect, How to Prepare, and  What you can Learn from Others." This webcast will share findings from the most recent National Climate Assessment report concerning...

  12. TAP Webcast Transcript July-29, 2009

    Broader source: Energy.gov [DOE]

    Transcript of the audio for the July 2009 TAP Webcast titled Economic Impacts of Renewable Energy sponsored by the U.S. Department of Energy (DOE) Technical Assistance Project (TAP) for state and local officials.

  13. Webcast of the 'Energy 101' Course Framework

    Broader source: Energy.gov [DOE]

    Energy 101: A Model Interdisciplinary Higher Education Course for Teaching the Fundamentals of Energy On April 10th, the Department of Energy and its collaborators held a live Webcast on ""The...

  14. Webcast on Energy Education and BITES

    Broader source: Energy.gov [DOE]

    On November 19, 2012 the Department of Energy held a webcast on energy education initiatives and the Buildings Industry Transportation and Electricity Scenarios (BITES) tool. BITES is a learning...

  15. LEDs for Interior Office Applications Webcast

    Broader source: Energy.gov [DOE]

    In this March 18, 2010 webcast, Jason Tuenge and Michael Myer of Pacific Northwest National Laboratory described the performance and economic considerations of replacing either 4' T8 lamps or...

  16. Guide to Benchmarking Residential Program Progress Webcast Slides |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Guide to Benchmarking Residential Program Progress Webcast Slides Guide to Benchmarking Residential Program Progress Webcast Slides Slides from "Guide to Benchmarking Residential Program Progress - Call for Public Review", a webcast from the U.S. Department of Energy's (DOE's) Better Buildings Neighborhood Program, presented by Dale Hoffmeyer and Cheryl Jenkins. Guide to Benchmarking Residential Program Progress Webcast Slides (1.15 MB) More Documents &

  17. Municipal Solid-State Street Lighting Consortium Kickoff Webcast |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Webcasts » Municipal Solid-State Street Lighting Consortium Kickoff Webcast Municipal Solid-State Street Lighting Consortium Kickoff Webcast This May 6, 2010 webcast served as the first official meeting of the new DOE Municipal Solid-State Street Lighting Consortium. Ed Smalley of Seattle City Light and Bruce Kinzey of Pacific Northwest National Laboratory discussed the Consortium's mission and goals, and provided an overview of its first steps, and opportunities to

  18. Webcast: Engaging Students in Energy | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Webcast: Engaging Students in Energy Webcast: Engaging Students in Energy Addthis The Energy Department presented a live webcast titled "Engaging Students in Energy" on Friday, December 13, 2013. The webcast provided information to educators, administrators, and others interested in learning more about the Department of Energy's efforts to increase opportunities for colleges, universities, and their students in energy, including information on the Energy 101 project and framework,

  19. TEXT-ALTERNATIVE VERSION: NEXT GENERATION LUMINAIRES INDOOR JUDGING 2014

    Broader source: Energy.gov [DOE]

    Dan Blitzer, NGL Steering Committee, The Practical Lighting Workshop: Products that have been evaluated by the Next Generation Luminaires Design Competition have been vetted to a degree that no...

  20. Next Generation Luminaires Design Competition Announces 2015 Winners

    Broader source: Energy.gov [DOE]

    Winners in the Indoor and Outdoor categories of the seventh annual Next Generation LuminairesTM Design Competition were announced today at LIGHTFAIR® International in New York. Sponsored by DOE,...

  1. Next Generation Luminaires Design Competition Announces 2014 Indoor Winners

    Broader source: Energy.gov [DOE]

    Winners in the Indoor category of the sixth annual Next Generation LuminairesTM Design Competition were announced today at The LED Show in Los Angeles. Sponsored by DOE, the Illuminating...

  2. Outdoor OLED Luminaire Using Solar Energy for Lighting Pedestrian Areas |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Outdoor OLED Luminaire Using Solar Energy for Lighting Pedestrian Areas Outdoor OLED Luminaire Using Solar Energy for Lighting Pedestrian Areas Lead Performer: OLEDWorks LLC - Rochester, NY DOE Total Funding: $148,368 Project Term: June 8, 2015 - March 8, 2016 Funding Opportunity: FY2015 Phase I Release 2 SBIR Awards PROJECT OBJECTIVE The recipient, currently the only commercial OLED lighting panel manufacturer in the U.S., will develop a concept for an outdoor OLED

  3. Integrated LED-based luminaire for general lighting

    DOE Patents [OSTI]

    Dowling, Kevin J.; Lys, Ihor A.; Williamson, Ryan C.; Roberge, Brian; Roberts, Ron; Morgan, Frederick; Datta, Michael Jay; Mollnow, Tomas Jonathan

    2016-08-30

    Lighting apparatus and methods employing LED light sources are described. The LED light sources are integrated with other components in the form of a luminaire or other general purpose lighting structure. Some of the lighting structures are formed as Parabolic Aluminum Reflector (PAR) luminaires, allowing them to be inserted into conventional sockets. The lighting structures display beneficial operating characteristics, such as efficient operation, high thermal dissipation, high output, and good color mixing.

  4. Solid-State Lighting Webcasts | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Webcasts Solid-State Lighting Webcasts Below you'll find links to information about past webcast presentations related to solid-state lighting, including presentation slides and question-and-answer sessions, where available. OLED Lighting Products-Capabilities, Challenges, Potential July 28, 2016 A presentation on a new DOE market study of OLED lighting products. CONNECTED OUTDOOR LIGHTING SYSTEMS FOR MUNICIPALITIES October 22, 2015 A presentation on the current state of connected outdoor

  5. Live webcast on groundbreaking results of Algal Biofuels Consortium, June

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    11 Live webcast on Algal Biofuels Consortium Live webcast on groundbreaking results of Algal Biofuels Consortium, June 11 Jose A. Olivares will present an overview of the technologies and processes that are needed to widely produce algae-based liquid transportation fuels. June 10, 2014 Jose A. Olivares Jose A. Olivares Contact Nancy Ambrosiano Communications Office (505) 667-0471 Email The Energy Department will present a live webcast titled "Algal Biofuels Consortium Releases

  6. Webcast: National Energy Literacy Virtual Town Hall | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Webcast: National Energy Literacy Virtual Town Hall Webcast: National Energy Literacy Virtual Town Hall Webcast: National Energy Literacy Virtual Town Hall On August 5, 2014, the Department of Energy (DOE) hosted a dynamic virtual conversation of ongoing efforts from across the country in utilizing the Energy Literacy Framework to address one of our nations' biggest national challenges, "Energy Illiteracy." The goal of this webinar was to share resources in energy education and provide

  7. Overview of Geothermal Energy Development Webcast | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Overview of Geothermal Energy Development Webcast Overview of Geothermal Energy Development Webcast GeothermalEnergyDevelopmentOverview_Presentation.pdf (3.79 MB) GeothermalWebinar_Transcript.pdf (270.98 KB) More Documents & Publications Home Performance with ENERGY STAR Webinar (text version) February 13, 2013 Webinar: Preliminary Process and Market Evaluation - Better Buildings Neighborhood Program Webcast Financing Residential Energy Efficiency with Carbon Offsets Transcript

  8. Guide to Benchmarking Residential Program Progress Webcast Slides...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Progress - Call for Public Review", a webcast from the U.S. Department of Energy's (DOE's) Better Buildings Neighborhood Program, presented by Dale Hoffmeyer and Cheryl Jenkins. ...

  9. Report Summary: Hammer Testing Findings for Solid-State Lighting Luminaires

    SciTech Connect (OSTI)

    2014-01-01

    Brief summary of DOE LED Systems Reliability Consortium's Hammer Testing Findings for Solid-State Lighting Luminaires report.

  10. Assessment of LED Technology in Ornamental Post-Top Luminaires. Sacramento, CA

    SciTech Connect (OSTI)

    Tuenge, J. R.; Bryan, M. M.; Bisbee, D. A.

    2011-12-01

    GATEWAY program report on a demonstration of LED ornamental post-top luminaires in a residential part of Sacramento, CA.

  11. LED Roadway Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Roadway Lighting LED Roadway Lighting PDF icon I-35 Bridge Report, Phase II PDF icon I-35 Bridge Report, Phase II Brief PDF icon I-35 Bridge Report, Phase I More Documents & ...

  12. Next Generation Luminaire (NGL) Downlight Demonstration Project: St. Anthony's Hospital

    Broader source: Energy.gov [DOE]

    The U.S. DOE conducts demonstration projects documenting the performance of LED luminaires relative to conventional technologies to increase market adoption of energy-efficient LED systems and to stimulate ongoing product development. These demonstration projects evaluate various aspects of lighting design, purchase, installation, and operation, and they assess the impacts LED technology might have on building owners and users.The prior reports featured NGL-recognized LED downlight luminaires in projects that were either new construction (Hilton Columbus Downtown) or a major renovation (Alston & Bird, LLC). But purchasing and installing new luminaires is not always feasible for existing buildings. For this report, the DOE evaluated the use of LED replacement lamps in the existing CFL downlights at St. Anthony Hospital in Gig Harbor, WA.

  13. Small Area Array-Based LED Luminaire Design

    SciTech Connect (OSTI)

    Thomas Yuan

    2008-01-09

    This report contains a summary of technical achievements during a three-year project to demonstrate high efficiency LED luminaire designs based on small area array-based gallium nitride diodes. Novel GaN-based LED array designs are described, specifically addressing the thermal, optical, electrical and mechanical requirements for the incorporation of such arrays into viable solid-state LED luminaires. This work resulted in the demonstration of an integrated luminaire prototype of 1000 lumens cool white light output with reflector shaped beams and efficacy of 89.4 lm/W at CCT of 6000oK and CRI of 73; and performance of 903 lumens warm white light output with reflector shaped beams and efficacy of 63.0 lm/W at CCT of 2800oK and CRI of 82. In addition, up to 1275 lumens cool white light output at 114.2 lm/W and 1156 lumens warm white light output at 76.5 lm/W were achieved if the reflector was not used. The success to integrate small area array-based LED designs and address thermal, optical, electrical and mechanical requirements was clearly achieved in these luminaire prototypes with outstanding performance and high efficiency.

  14. DOE Publishes Report on Accelerated Life Testing of SSL Luminaires

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) has published the findings of a new study utilizing a highly accelerated life-test method (called the "hammer test") intended to produce failures in SSL luminaires in a reasonable test period, with the goal

  15. Ultra-Compact High-Efficiency Luminaire for General Illumination

    SciTech Connect (OSTI)

    Ted Lowes

    2012-04-08

    Cree has developed a new ultra-compact light emitting diode (LED) luminaire capable of providing high efficacy with excellent color quality that can lead to significant energy savings in today??s commercial and retail applications. This success was based on an integrated development effort tailoring the LED component characteristics, optics, thermal management and driver design for the small footprint to achieve an overall system efficiency of ? 70%. A new LED component was designed to provide high brightness and efficacy in a form factor that allowed for a small directional beam with a luminaire housing design able to dissipate the heat effectively using a small physical envelope. A very compact, 90% efficient driver was developed to meet the system performance while not taking away any thermal mass from the heat sink. A 91% efficient secondary optics was designed to maximize efficiency while providing a smooth beam. The reliability of the new LED component was robust under accelerated testing conditions. Luminaires were assembled integrating the novel LED component, secondary optics, heat sink and driver technology to demonstrate the system improvement. Cree has successfully completed this project by developing an ultra-compact LED luminaire that provided 380 lumens at a correlated color temperature (CCT) of 2822 K and color rendering index (CRI) of 94 with an efficacy of 94 lumens per watt (LPW) when operating at 4 W input power (steady state) with an overall system efficiency of 81%. At a higher input power of 9 Watts, the lamp provided 658 lumens at 71 LPW.

  16. Covered Product Category: Industrial Luminaires (High/Low Bay)

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for Industrial Luminaires (High/Low Bay). Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  17. NREL: Transportation Research - E-Roadway Animation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    extend the operational range of electric vehicles. Plus, e-roadway power can come from renewable sources. Text version. Printable Version Transportation Research Home...

  18. Live Webcast on Recent Wind Energy Technology Advances

    Broader source: Energy.gov [DOE]

    The Energy Department will present a live webcast titled “Recent Wind Technology Advances” on April 16, 2014, from 3:00 to 4:00 p.m. Eastern Standard Time.

  19. Technical Feasibility Assessment of LED Roadway Lighting on the...

    Office of Scientific and Technical Information (OSTI)

    Technical Feasibility Assessment of LED Roadway Lighting on the Golden Gate Bridge Tuenge, Jason R. LED; induction; ceramic metal halide; plasma; roadway lighting; Golden Gate...

  20. Next Generation Luminaire (NGL) Downlight Demonstration Project, Hilton Columbus Downtown

    SciTech Connect (OSTI)

    Davis, R. G.; Perrin, T. E.

    2014-09-30

    At the Hilton Columbus Downtown hotel in Ohio, DOE's Better Buildings Alliance conducted a demonstration of Next Generation Luminaires-winning downlights installed in all guest rooms and suites prior to the hotel's 2012 opening. After a post-occupancy assessment, the LED downlights not only provided the aesthetic appearance and dimming functionality desired, but also provided 50% energy savings relative to a comparable CFL downlight and enabled the lighting power to be more than 20% below that allowed by code.

  1. Performance of Powerline-Controlled Luminaire Final Report

    SciTech Connect (OSTI)

    Rubinstein, Francis; Pettler, Pete; Snook, Joel; Engelking, Erik; Kiliccote, Sila

    2004-12-01

    In previous work, LBNL with Vistron Corp, developed an innovative lighting control system using a communications technology called Phase Cut Carrier (PCC). This report describes the performance of the desktop demonstration system that was developed to test this new controls concept. More detailed information on this project is given in [1]. This report is in fulfillment of deliverable No.1 'Report on Performance of Powerline-carrier Controlled Luminaire' from the FY2004 DOE Work Plan.

  2. Luminaires for Advanced Lighting in Education | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    RTI International - Research Triangle Park, NC Partner: Finelite Inc. - Union City, CA DOE Total Funding: $450,000 Cost Share: $150,000 Project Term: July 1, 2015 - December 31, 2016 Funding Opportunity: SSL R&D Funding Opportunity Announcement (FOA) (DE-FOA-0001171) Project Objective This project will develop and demonstrate the advantages of the novel luminaire designs that comprise the next-generation integrated classroom lighting system (NICLS) technology, demonstrate the benefits of

  3. LOW-COST LED LUMINAIRE FOR GENERAL ILLUMINATION

    SciTech Connect (OSTI)

    Lowes, Ted

    2014-07-31

    During this two-year Solid-State Lighting (SSL) Manufacturing R&D project Cree developed novel light emitting diode (LED) technologies contributing to a cost-optimized, efficient LED troffer luminaire platform emitting at ~3500K correlated color temperature (CCT) at a color rendering index (CRI) of >90. To successfully achieve program goals, Cree used a comprehensive approach to address cost reduction of the various optical, thermal and electrical subsystems in the luminaire without impacting performance. These developments built on Cree’s high- brightness, low-cost LED platforms to design a novel LED component architecture that will enable low-cost troffer luminaire designs with high total system efficacy. The project scope included cost reductions to nearly all major troffer subsystems as well as assembly costs. For example, no thermal management components were included in the troffer, owing to the optimized distribution of compact low- to mid-power LEDs. It is estimated that a significant manufacturing cost savings will result relative to Cree’s conventional troffers at the start of the project. A chief project accomplishment was the successful development of a new compact, high-efficacy LED component geometry with a broad far-field intensity distribution and even color point vs. emission angle. After further optimization and testing for production, the Cree XQ series of LEDs resulted. XQ LEDs are currently utilized in Cree’s AR series troffers, and they are being considered for use in other platforms. The XQ lens geometry influenced the independent development of Cree’s XB-E and XB-G high-voltage LEDs, which also have a broad intensity distribution at high efficacy, and are finding wide implementation in Cree’s omnidirectional A-lamps.

  4. Webcast of the Energy Literate Citizenry from K-to-Gray: A Webcast on the Department of Energy's Energy Literacy Initiative

    Broader source: Energy.gov [DOE]

    The Energy Literacy Framework webinar was held on February 6, 2013 at 4 pm EST. The presentation, webcast and resources are available below.

  5. Webcast: Municipal Solid-State Street Lighting Consortium Retrofit...

    Broader source: Energy.gov (indexed) [DOE]

    Laboratory provided a guided walk-through of what the tool can do and how to use it to evaluate costs and benefits associated with converting to LED street and roadway lighting. ...

  6. Tuesday Webcast for Industry: Regional Energy Efficiency Programs

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Webcast for Industry: Regional Energy Efficiency Programs December 13, 2011 MEEA's Midwest Industrial Initiative Stacey Paradis Deputy Director Midwest Energy Efficiency Alliance Mission MEEA is a collaborative network whose purpose is to advance energy efficiency to support sustainable economic development and environmental preservation. MEEA's Role in the Midwest * Designing and Evaluating Programs & RFPs * Administering Programs * Delivering Training & Workshops * Developing Marketing

  7. DOE Publishes CALiPER Snapshot Report on Indoor LED Luminaires | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Indoor LED Luminaires DOE Publishes CALiPER Snapshot Report on Indoor LED Luminaires June 5, 2014 - 10:56am Addthis The U.S. Department of Energy's CALiPER program has released a Snapshot Report on indoor LED luminaires, which utilizes the LED Lighting Facts® program's extensive product database to help industry stakeholders understand the current state and trajectory of the market for that class of products. Based on data through the first quarter of 2014, the report focuses on

  8. Life Prediction and Classification of Failure Modes in Solid State Luminaires Using Bayesian Probabilistic Models

    SciTech Connect (OSTI)

    Lall, Pradeep; Wei, Junchao; Sakalaukus, Peter

    2014-05-27

    A new method has been developed for assessment of the onset of degradation in solid state luminaires to classify failure mechanisms by using metrics beyond lumen degradation that are currently used for identification of failure. Luminous Flux output, Correlated Color Temperature Data on Philips LED Lamps has been gathered under 85°C/85%RH till lamp failure. The acquired data has been used in conjunction with Bayesian Probabilistic Models to identify luminaires with onset of degradation much prior to failure through identification of decision boundaries between lamps with accrued damage and lamps beyond the failure threshold in the feature space. In addition luminaires with different failure modes have been classified separately from healthy pristine luminaires. It is expected that, the new test technique will allow the development of failure distributions without testing till L70 life for the manifestation of failure.

  9. DOE Publishes CALiPER Report on the Photometric Testing of White-Tunable LED Luminaires

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy's CALiPER program has released Report 23: Photometric Testing of White-Tunable LED Luminaires, which is the first in a planned series of investigations on color...

  10. Demonstration Assessment of LED Roadway Lighting: Philadelphia, PA

    SciTech Connect (OSTI)

    Royer, Michael P.; Tuenge, Jason R.; Poplawski, Michael E.

    2012-09-01

    For this demonstration assessment, 10 different groups of LED luminaires were installed at three sites in Philadelphia, PA. Each of the three sites represented a different set of conditions, most importantly with regard to the incumbent HPS luminaires, which were nominally 100 W, 150 W, and 250 W. The performance of each product was evaluated based on manufacturer data, illuminance calculations, field measurements of illuminance, and the subjective impressions of both regular and expert observers.

  11. Tuesday Webcast for Industry: Key Energy-Saving Activities for Smaller Facilities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ADVANCED MANUFACTURING OFFICE Tuesday Webcast for Industry Key Energy-Saving Activities for Smaller Facilities Webcast Questions and Answers: January 10, 2012 Presenters: Tom Wenning, Technical Account Manager, Oak Ridge National Laboratory Richard D. Feustel, Corporate Energy Services Manager, Briggs & Stratton Corporation The U.S. Department of Energy's (DOE's) Office of Advanced Manufacturing Program (AMO) hosts a series of webcasts on the first Tuesday of every month from 2:00 p.m. to

  12. Integrated Energy Systems Multi-Media Webcast: Three CHP Sites Yield

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Important Lessons Learned, September 2005 | Department of Energy Multi-Media Webcast: Three CHP Sites Yield Important Lessons Learned, September 2005 Integrated Energy Systems Multi-Media Webcast: Three CHP Sites Yield Important Lessons Learned, September 2005 Cooling, Heating and Power (CHP) system integration is advancing. The U.S. Department of Energy partnered with industry to accelerate CHP system integration. This is an announcement for a webcast that provided detailed information on

  13. ClimateChangeLIVE Webcast: Join the Climate Conversation

    Broader source: Energy.gov [DOE]

    Join ClimateChangeLIVE's webcast, bringing together students and climate experts for a discussion about climate change and what students and classes around the country are doing to be part of the climate solution. Students will be able to interact with climate scientists and experts online through Facebook and Twitter. A GreenWorks! grant will be offered to help schools with climate action projects.

  14. Text-Alternative Version: Municipal Solid-State Street Lighting Consortium Retrofit Financial Analysis Tool Webcast

    Office of Energy Efficiency and Renewable Energy (EERE)

    Below is the text-alternative version of the "Municipal Solid-State Street Lighting Consortium Retrofit Financial Analysis Tool" webcast, held April 3, 2012.

  15. Text-Alternative Version: Webcast of the Renewable Energy Competency Model: An Aid to Build a Renewable Energy Skilled Workforce

    Broader source: Energy.gov [DOE]

    This is the Webcast of Renewable Energy and Competency model. Led by Linda Silverman an economist at Energy Efficiency and Renewable Energy and Pam Frugoli Department of Labor. This webcast was on...

  16. Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting at the I-35W Bridge, Minneapolis, MN

    SciTech Connect (OSTI)

    Kinzey, Bruce R.; Myer, Michael

    2009-08-31

    This report describes the process and results of a demonstration of solid-state lighting (SSL) technology conducted in 2009 at the recently reconstructed I-35W bridge in Minneapolis, MN. The project was supported under the U.S. Department of Energy (DOE) Solid-State Lighting GATEWAY Technology Demonstration Program. Other participants in the demonstration project included the Minnesota Department of Transportation (Mn/DOT), Federal Highways Administration (FHWA), and BetaLED™ (a division of Ruud Lighting). Pacific Northwest National Laboratory (PNNL) conducted the measurements and analysis of the results. DOE has implemented a three-year evaluation of the LED luminaires in this installation in order to develop new longitudinal field data on LED performance in a challenging, real-world environment. This document provides information through the initial phase of the I-35W bridge project, up to and including the opening of the bridge to the public and the initial feedback received on the LED lighting installation from bridge users. Initial findings of the evaluation are favorable, with minimum energy savings level of 13% for the LED installation relative to the simulated base case using 250W high-pressure sodium (HPS) fixtures. The LEDs had an average illuminance level of 0.91 foot candles compared to 1.29 fc for the HPS lamps. The LED luminaires cost $38,000 more than HPS lamps, yielding a lengthy payback period, however the bridge contractor had offered to include the LED luminaires as part of the construction package at no additional cost. One potentially significant benefit of the LEDs in this installation is avoiding rolling lane closures on the heavily-traveled interstate bridge for the purpose of relamping the HPS fixtures. Rolling lane closures involve multiple crew members and various maintenance and safety vehicles, diversion of traffic, as well as related administrative tasks (e.g., approvals, scheduling, etc.). Mn/DOT records show an average cost of

  17. Scalable Light Module for Low-Cost, High-Efficiency Light- Emitting Diode Luminaires

    SciTech Connect (OSTI)

    Tarsa, Eric

    2015-08-31

    During this two-year program Cree developed a scalable, modular optical architecture for low-cost, high-efficacy light emitting diode (LED) luminaires. Stated simply, the goal of this architecture was to efficiently and cost-effectively convey light from LEDs (point sources) to broad luminaire surfaces (area sources). By simultaneously developing warm-white LED components and low-cost, scalable optical elements, a high system optical efficiency resulted. To meet program goals, Cree evaluated novel approaches to improve LED component efficacy at high color quality while not sacrificing LED optical efficiency relative to conventional packages. Meanwhile, efficiently coupling light from LEDs into modular optical elements, followed by optimally distributing and extracting this light, were challenges that were addressed via novel optical design coupled with frequent experimental evaluations. Minimizing luminaire bill of materials and assembly costs were two guiding principles for all design work, in the effort to achieve luminaires with significantly lower normalized cost ($/klm) than existing LED fixtures. Chief project accomplishments included the achievement of >150 lm/W warm-white LEDs having primary optics compatible with low-cost modular optical elements. In addition, a prototype Light Module optical efficiency of over 90% was measured, demonstrating the potential of this scalable architecture for ultra-high-efficacy LED luminaires. Since the project ended, Cree has continued to evaluate optical element fabrication and assembly methods in an effort to rapidly transfer this scalable, cost-effective technology to Cree production development groups. The Light Module concept is likely to make a strong contribution to the development of new cost-effective, high-efficacy luminaries, thereby accelerating widespread adoption of energy-saving SSL in the U.S.

  18. Webcast of the Renewable Energy Competency Model: An Aid to Build a Renewable Energy Skilled Workforce

    Broader source: Energy.gov [DOE]

    The Department of Energy held a webcast titled "Renewable Energy Competency Model: An Aid to Build a Renewable Energy Skilled Workforce" on Monday, October 22, 2012. The Renewable Energy Competency...

  19. Webcast: Municipal Solid-State Street Lighting Consortium Retrofit Financial Analysis Tool

    Broader source: Energy.gov [DOE]

    This April 3, 2012 webcast presented information about the Retrofit Financial Analysis Tool developed by DOE"s Municipal Solid-State Street Lighting Consortium. Doug Elliott of Pacific Northwest...

  20. Live Webcast on the 2014 Farm Bill's Renewable Energy for America Program

    Broader source: Energy.gov [DOE]

    The Energy Department will present a live webcast titled “The 2014 Farm Bill's Renewable Energy for America Program” on May 21, 2014, from 3:00 to 4:00 p.m. Eastern Standard Time.

  1. Magical Mystery Devices or Not: How do LED Lamps and Luminaires Really Measure-Up?

    SciTech Connect (OSTI)

    Paget, Maria L.; McCullough, Jeffrey J.; Steward, Heidi E.

    2008-08-15

    Solid-state lighting products for general lighting applications are now gaining a market presence, and more and more people are asking, “Which of these are ‘good’ products? Do they perform as claimed? How do they compare? Light Emitting Diodes (LEDs) differ from other light sources enough to require new procedures for measuring their performance and comparing to other lighting options, so both manufacturers and buyers are facing a learning curve. The energy-efficiency community has traditionally compared light sources based on system efficacy: rated lamp lumens divided by power into the system. This doesn’t work for LEDs because there are no standard LED “lamp” packages and no lamp ratings, and because LED performance depends heavily on thermal, electrical, and optical design of complete lighting unit or ‘luminaire’. Luminaire efficacy is the preferred metric for LEDs because it measures the net light output from the luminaire divided by power into the system.

  2. Bayesian probabilistic model for life prediction and fault mode classification of solid state luminaires

    SciTech Connect (OSTI)

    Lall, Pradeep; Wei, Junchao; Sakalaukus, Peter

    2014-06-22

    A new method has been developed for assessment of the onset of degradation in solid state luminaires to classify failure mechanisms by using metrics beyond lumen degradation that are currently used for identification of failure. Luminous Flux output, Correlated Color Temperature Data on Philips LED Lamps has been gathered under 85°C/85%RH till lamp failure. Failure modes of the test population of the lamps have been studied to understand the failure mechanisms in 85°C/85%RH accelerated test. Results indicate that the dominant failure mechanism is the discoloration of the LED encapsulant inside the lamps which is the likely cause for the luminous flux degradation and the color shift. The acquired data has been used in conjunction with Bayesian Probabilistic Models to identify luminaires with onset of degradation much prior to failure through identification of decision boundaries between lamps with accrued damage and lamps beyond the failure threshold in the feature space. In addition luminaires with different failure modes have been classified separately from healthy pristine luminaires. The α-λ plots have been used to evaluate the robustness of the proposed methodology. Results show that the predicted degradation for the lamps tracks the true degradation observed during 85°C/85%RH during accelerated life test fairly closely within the ±20% confidence bounds. Correlation of model prediction with experimental results indicates that the presented methodology allows the early identification of the onset of failure much prior to development of complete failure distributions and can be used for assessing the damage state of SSLs in fairly large deployments. It is expected that, the new prediction technique will allow the development of failure distributions without testing till L70 life for the manifestation of failure.

  3. UDC Teaming with Acuity to Make Commercial-Sector PHOLED Luminaire

    Broader source: Energy.gov [DOE]

    With support from DOE's Small Business Innovation Research program, Universal Display Corporation (UDC) is working with Acuity Brands Lighting to make an efficient, color-tunable luminaire for use in the commercial sector using UDC's proprietary phosphorescent OLED (PHOLED™) technology. The present project aims to adapt this technology—which increases the energy efficiency of OLEDs by as much as fourfold—to high-end commercial and institutional building applications.

  4. Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting

    SciTech Connect (OSTI)

    Kinzey, B. R.; Myer, M. A.

    2009-11-01

    A U.S. Department of Energy Solid-State Lighting Gateway Report on a Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting in Lija Loop, Portland, Oregon.

  5. Tuesday Webcast for Industry: Tax Rebates/Credits Available for Energy Efficiency Actions

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tax Rebates/Credits Available for Energy Efficiency Actions Webcast Questions and Answers: May 8, 2012 Presenters: Jeff Harris, Senior Vice President of Programs, Alliance to Save Energy Tim Konicek, Executive Director, CleanTech Partners The U.S. Department of Energy's (DOE's) Advanced Manufacturing Office (AMO) hosts a series of webcasts on the first Tuesday of every month from 2:00 p.m. to 3:00 p.m. Eastern Time. The series helps industrial personnel learn about various ways to save energy

  6. Technical Feasibility Assessment of LED Roadway Lighting on the Golden Gate Bridge

    SciTech Connect (OSTI)

    Tuenge, J. R.

    2012-09-01

    GATEWAY program report on the technical feasibility of LED roadway lighting on the Golden Gate Bridge in San Francisco, CA.

  7. February 13, 2013 Webinar: Preliminary Process and Market Evaluation – Better Buildings Neighborhood Program Webcast

    Broader source: Energy.gov [DOE]

    February 13, 2013 Webinar: Preliminary Process and Market Evaluation – Better Buildings Neighborhood Program Webcast ; Better Buildings Neighborhood Program; national program with a goal of identifying what elements of grantee programs are most successful at bringing about market changes that will result in sustainable energy savings

  8. Assessment of LED Technology in Ornamental Post-Top Luminaires (Host Site: Sacramento, CA)

    SciTech Connect (OSTI)

    Tuenge, Jason R.

    2011-12-01

    The DOE Municipal Solid-State Street Lighting Consortium has evaluated four different LED replacements for existing ornamental post-top street lights in Sacramento, California. The project team was composed of the City and its consultant, PNNL (representing the Consortium), and the Sacramento Municipal Utility District. Product selection was finalized in March 2011, yielding one complete luminaire replacement and three lamp-ballast retrofit kits. Computer simulations, field measurements, and laboratory testing were performed to compare the performance and cost-effectiveness of the LED products relative to the existing luminaire with 100 W high-pressure sodium lamp. After it was confirmed the LED products were not equivalent to HPS in terms of initial photopic illumination, the following parameters were scaled proportionally to enable equitable (albeit hypothetical) comparisons: light output, input wattage, and pricing. Four replacement scenarios were considered for each LED product, incorporating new IES guidance for mesopic multipliers and lumen maintenance extrapolation, but life cycle analysis indicated cost effectiveness was also unacceptable. Although LED efficacy and pricing continue to improve, this project serves as a timely and objective notice that LED technology may not be quite ready yet for such applications.

  9. Webcast on Energy Education and BITES: A potential online learning tool for energy education in colleges and universities

    Broader source: Energy.gov [DOE]

    On November 19, 2012 the Department of Energy held a webcast on energy education initiatives and the Buildings Industry Transportation and Electricity Scenarios (BITES) tool. BITES is a learning...

  10. Solution-Procesed Small-Molecule OLED Luminaire for Interior Illumination

    SciTech Connect (OSTI)

    Parker, Ian

    2012-02-29

    Prototype lighting panels and luminaires were fabricated using DuPont Displays solution-processed small-molecule OLED technology. These lighting panels were based on a spatially-patterned, 3-color design, similar in concept to an OLED display panel, with materials chosen to maximize device efficacy. The majority of the processing steps take place in air (rather than high vacuum). Optimization of device architecture, processing and construction was undertaken, with a final prototype design of 50 cm{sup 2} being fabricated and tested. Performance of these panels reached 35 lm/W at illuminant-A. A unique feature of this technology is the ability to color tune the emission, and color temperatures ranging from 2700 to > 6,500K were attained in the final build. Significant attention was paid to low-cost fabrication techniques.

  11. Demonstration Assessment of LED Roadway Lighting: NE Cully Blvd., Portland, OR

    SciTech Connect (OSTI)

    Royer, M. P.; Poplawski, M. E.; Tuenge, J. R.

    2012-08-01

    GATEWAY program report on a demonstration of LED roadway lighting on NE Cully Boulevard in Portland, OR, a residential collector road.

  12. Tuesday Webcast for Industry: Key Energy-Saving Projects for Smaller Facilities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Key Energy-Saving Projects for Smaller Facilities January 10, 2012 Program Name or Ancillary Text eere.energy.gov Key Energy-Saving Activities for Small and Medium Sized Facilities Thomas Wenning Oak Ridge National Laboratory Tuesday Webcast for Industry January 10, 2012 3 | Advanced Manufacturing Office eere.energy.gov Percent of Total U.S. Manufacturing Energy Small 5% Mid-Size 37% Large 58% 0 50000 100000 150000 200000 250000 U.S. Manufacturing Plants: By Size Small Plants Mid-Size Plants

  13. Covered Product Category: Exterior Lighting

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for outdoor wall-mounted light fixtures or luminaires, outdoor pole/arm-mounted area and roadway luminaires, outdoor pole/arm-mounted decorative luminaires, fuel pump canopy luminaires, bollards, and parking garage luminaires, all of which are FEMP-designated product categories.

  14. Recommendations for a commercial vehicle to roadway communications national standard

    SciTech Connect (OSTI)

    Davis, D.T.

    1995-02-01

    This is the final report by the Lawrence Livermore National Laboratory (LLNL). Based on the authors studies of the Electronic Toll and Traffic Management (ETTM) industry, they make recommendations for a possible future national standard for short range Vehicle-to-Roadway Communications (VRC) for Commercial Vehicle Operations (CVO). Of primary interest to the Federal Highway Administration are Mainline Automated Clearance Systems (MACS). In such a system, CVs would exchange data with weigh-stations and ports of entry at highway speeds using wireless Radio Frequency (RF) techniques and to enable automated clearance. The CV would carry a transponder (or tag) and transmit electronic credentials, safety data, in-transit data, etc. on command from a roadside transceiver (or reader) upstream from the weigh-station or port of entry. Computer processing of this data, plus the weigh-in-motion reading and historical information, would be used to decide whether to direct the truck to stop for manual clearance or proceed.

  15. Transcript of See Action and Technical Assistance Program Webcast: Energy Audit and Retro-Commissioning Policies for Public and Commercial Buildings

    Office of Energy Efficiency and Renewable Energy (EERE)

    U.S. Department of Energy Office (DOE) of Energy Efficiency and Renewable Energy (EERE) transcript of See Action and Technical Assistance Program Webcast: Energy Audit and Retro-Commissioning Policies for Public and Commercial Buildings.

  16. Technical Feasibility Assessment of LED Roadway Lighting on the Golden Gate

    Office of Scientific and Technical Information (OSTI)

    Bridge (Technical Report) | SciTech Connect Technical Report: Technical Feasibility Assessment of LED Roadway Lighting on the Golden Gate Bridge Citation Details In-Document Search Title: Technical Feasibility Assessment of LED Roadway Lighting on the Golden Gate Bridge Subsequent to preliminary investigations by the Golden Gate Bridge Highway & Transportation District (GGB), in coordination with Pacific Gas & Electric (PG&E), the GATEWAY Demonstration program was asked to

  17. ATMOSPHERIC MODELING IN SUPPORT OF A ROADWAY ACCIDENT

    SciTech Connect (OSTI)

    Buckley, R.; Hunter, C.

    2010-10-21

    The United States Forest Service-Savannah River (USFS) routinely performs prescribed fires at the Savannah River Site (SRS), a Department of Energy (DOE) facility located in southwest South Carolina. This facility covers {approx}800 square kilometers and is mainly wooded except for scattered industrial areas containing facilities used in managing nuclear materials for national defense and waste processing. Prescribed fires of forest undergrowth are necessary to reduce the risk of inadvertent wild fires which have the potential to destroy large areas and threaten nuclear facility operations. This paper discusses meteorological observations and numerical model simulations from a period in early 2002 of an incident involving an early-morning multicar accident caused by poor visibility along a major roadway on the northern border of the SRS. At the time of the accident, it was not clear if the limited visibility was due solely to fog or whether smoke from a prescribed burn conducted the previous day just to the northwest of the crash site had contributed to the visibility. Through use of available meteorological information and detailed modeling, it was determined that the primary reason for the low visibility on this night was fog induced by meteorological conditions.

  18. Machine for applying a two component resin to a roadway surface

    DOE Patents [OSTI]

    Huszagh, Donald W.

    1985-01-01

    A portable machine for spraying two component resins onto a roadway, the machine having a pneumatic control system, including apparatus for purging the machine of mixed resin with air and then removing remaining resin with solvent. Interlocks prevent contamination of solvent and resin, and mixed resin can be purged in the event of a power failure.

  19. Machine for applying a two component resin to a roadway surface

    DOE Patents [OSTI]

    Huszagh, D.W.

    1984-01-01

    A portable machine for spraying two component resins onto a roadway, the machine having a pneumatic control system, including means for purging the machine of mixed resin with air and then removing remaining resin with solvent. Interlocks prevent contamination of solvent and resin, and mixed resin can be purged in the event of a power failure.

  20. Covered Product Category: Exterior Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exterior Lighting Covered Product Category: Exterior Lighting The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for outdoor wall-mounted light fixtures or luminaires, outdoor pole/arm-mounted area and roadway luminaires, outdoor pole/arm-mounted decorative luminaires, fuel pump canopy luminaires, bollards, and parking garage luminaires, all of which are FEMP-designated product categories. Federal laws and requirements mandate that

  1. Implementation Scenarios for Electric Vehicle Roadway Wireless Power Transfer (Poster), NREL (National Renewable Energy Laboratory)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. Implementation Scenarios for Electric Vehicle Roadway Wireless Power Transfer A. Meintz, T. Markel, E. Burton, L. Wang, J. Gonder, A. Brooker, and A. Konan Work sponsored by United States Department of Energy, Office of Energy Efficiency and Renewable Energy, Vehicles Technologies Office, Vehicle Systems Program The information contained in this poster is subject to a government license. 2015 IEEE PELS Workshop on

  2. Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting, I-35W Bridge, Minneapolis, Minnesota, Phase I Report

    SciTech Connect (OSTI)

    Kinzey, B. R.; Myer, M. A.

    2009-08-01

    On the I-35W Bridge in Minneapolis, Minnesota, the GATEWAY program conducted a two-phase demonstration of LED roadway lighting on the main span, which is one of the country's oldest continuously operated exterior LED lighting installations. The Phase I report provides an overview of initial project results including lighting performance, economic performance, and potential energy savings.

  3. The MacArthur Maze Fire and Roadway Collapse: A "Worst Case Scenario" for Spent Nuclear Fuel Transportation?

    SciTech Connect (OSTI)

    Bajwa, Christopher S.; Easton, Earl P.; Adkins, Harold E.; Cuta, Judith M.; Klymyshyn, Nicholas A.; Suffield, Sarah R.

    2012-07-06

    In 2007, a severe transportation accident occurred near Oakland, California, at the interchange known as the "MacArthur Maze." The accident involved a double tanker truck of gasoline overturning and bursting into flames. The subsequent fire reduced the strength of the supporting steel structure of an overhead interstate roadway causing the collapse of portions of that overpass onto the lower roadway in less than 20 minutes. The US Nuclear Regulatory Commission has analyzed what might have happened had a spent nuclear fuel transportation package been involved in this accident, to determine if there are any potential regulatory implications of this accident to the safe transport of spent nuclear fuel in the United States. This paper provides a summary of this effort, presents preliminary results and conclusions, and discusses future work related to the NRC's analysis of the consequences of this type of severe accident.

  4. Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting, I-35W Bridge, Minneapolis, Minnesota, Phase II Report

    SciTech Connect (OSTI)

    Kinzey, B. R.; Davis, R. G.

    2014-09-30

    On the I-35W Bridge in Minneapolis, Minnesota, the GATEWAY program conducted a two-phase demonstration of LED roadway lighting on the main span, which is one of the country's oldest continuously operated exterior LED lighting installations. The Phase II report documents longer-term performance of the LED lighting system that was installed in 2008, and is the first report on the longer-term performance of LED lighting in the field.

  5. Implementation Scenarios for Electric Vehicle Roadway Wireless Power Transfer; NREL (National Renewable Energy Laboratory)

    SciTech Connect (OSTI)

    Meintz, A.; Markel, T.; Burton, E.; Wang, L.; Gonder, J.; Brooker, A.

    2015-06-05

    Analysis has been performed on the Transportation Secure Data Center (TSDC) warehouse of collected GPS second-by-second driving profile data of vehicles in the Atlanta, Chicago, Fresno, Kansas City, Los Angeles, Sacramento, and San Francisco Consolidated Statistical Areas (CSAs) to understand in-motion wireless power transfer introduction scenarios. In this work it has been shown that electrification of 1% of road miles could reduce fuel use by 25% for Hybrid Electric Vehicles (HEVs) in these CSAs. This analysis of strategically located infrastructure offers a promising approach to reduced fuel consumption; however, even the most promising 1% of road miles determined by these seven analysis scenarios still represent an impressive 2,700 miles of roadway to electrify. Therefore to mitigate the infrastructure capital costs, integration of the grid-tied power electronics in the Wireless Power Transfer (WPT) system at the DC-link to photovoltaic and/or battery storage is suggested. The integration of these resources would allow for the hardware to provide additional revenue through grid services at times of low traffic volumes and conversely at time of high traffic volumes these resources could reduce the peak demand that the WPT system would otherwise add to the grid.

  6. Effect of Weight and Roadway Grade on the Fuel Economy of Class-8 Frieght Trucks

    SciTech Connect (OSTI)

    Franzese, Oscar; Davidson, Diane

    2011-11-01

    In 2006-08, the Oak Ridge National Laboratory, in collaboration with several industry partners, collected real-world performance and situational data for long-haul operations of Class-8 trucks from a fleet engaged in normal freight operations. Such data and information are useful to support Class-8 modeling of combination truck performance, technology evaluation efforts for energy efficiency, and to provide a means of accounting for real-world driving performance within combination truck research and analyses. The present study used the real-world information collected in that project to analyze the effects that vehicle speed and vehicle weight have on the fuel efficiency of Class-8 trucks. The analysis focused on two type of terrains, flat (roadway grades ranging from -1% to 1%) and mild uphill terrains (roadway grades ranging from 1% to 3%), which together covered more than 70% of the miles logged in the 2006-08 project (note: almost 2/3 of the distance traveled on mild uphill terrains was on terrains with 1% to 2% grades). In the flat-terrain case, the results of the study showed that for light and medium loads, fuel efficiency decreases considerably as speed increases. For medium-heavy and heavy loads (total vehicle weight larger than 65,000 lb), fuel efficiency tends to increase as the vehicle speed increases from 55 mph up to about 58-60 mph. For speeds higher than 60 mph, fuel efficiency decreases at an almost constant rate with increasing speed. At any given speed, fuel efficiency decreases and vehicle weight increases, although the relationship between fuel efficiency and vehicle weight is not linear, especially for vehicle weights above 65,000 lb. The analysis of the information collected while the vehicles were traveling on mild upslope terrains showed that the fuel efficiency of Class-8 trucks decreases abruptly with vehicle weight ranging from light loads up to medium-heavy loads. After that, increases in the vehicle weight only decrease fuel

  7. DOE Publishes CALiPER Snapshot Report on LED Outdoor Area Lighting |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy LED Outdoor Area Lighting DOE Publishes CALiPER Snapshot Report on LED Outdoor Area Lighting July 22, 2014 - 10:11am Addthis The U.S. Department of Energy's CALiPER program has released a Snapshot Report on LED outdoor area lighting. Based on LED Lighting Facts® data through the second quarter of 2014, the report focuses on outdoor area/roadway luminaires, parking garage luminaires, canopy luminaires, and outdoor directional luminaires. As of July 1, 2014, area/roadway

  8. Upgrading Troffer Luminaires to LED

    SciTech Connect (OSTI)

    none,

    2014-01-31

    Solid-state lighting technology fact sheet providing guidance on the various factors to consider when deciding on an LED upgrade for a fluorescent troffer system.

  9. Reporting LED Luminaire Product Performance

    SciTech Connect (OSTI)

    2008-12-01

    This brochure on LED product performance is an outcome of a joint DOE-NGLIA effort to assure and improve the quality of SSL products.

  10. SSP/Dashboard Open-Line Help Call | Department of Energy

    Energy Savers [EERE]

    Department of Energy Information Resources » Webcasts » SSL Luminaire Performance in the Lab: Just How Well Do They Perform? SSL Luminaire Performance in the Lab: Just How Well Do They Perform? On December 13, 2007, Mia Paget, Pacific Northwest National Laboratory, gave an overview of the Commercially Available LED Product Evaluation and Reporting (CALiPER) Program, test procedures for SSL products, and recent test results. CALiPER provides objective product performance information,

  11. Recovery Act Funding Opportunities Webcast

    Broader source: Energy.gov [DOE]

    As a result of the 2009 American Reinvestment and Recovery Act, the Geothermal Technologies Office (GTO) has four open Funding Opportunity Announcements (FOAs) totaling $484 million for cost-shared...

  12. Overcharge Protection for PHEV Batteries | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    document reviews the major design and specification concerns for outdoor area lighting, and discusses the potential for LED luminaires to save energy plant-wide while providing high quality lighting for outdoor areas. Outdoor Area Lighting (June 2008) (3.16 MB) More Documents & Publications Philadelphia International Airport Apron Lighting: LED System Performance in a Trial Installation Model Specification for LED Roadway Luminaires, V2.0 Demonstration Assessment of Light Emitting Diode

  13. Outdoor Area Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Outdoor Area Lighting Outdoor Area Lighting This document reviews the major design and specification concerns for outdoor area lighting, and discusses the potential for LED luminaires to save energy plant-wide while providing high quality lighting for outdoor areas. Outdoor Area Lighting (June 2008) (3.16 MB) More Documents & Publications Philadelphia International Airport Apron Lighting: LED System Performance in a Trial Installation Model Specification for LED Roadway Luminaires, V2.0

  14. Covered Product Category: Suspended Fluorescent Luminaires |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    product is available to meet the functional requirements, or that no such product is life cycle cost effective for the specific application. Design and Installation Tips:...

  15. IESNA LM-80-08 - An Overview of the Test Procedure and How it is Used for

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ENERGY STAR® | Department of Energy IESNA LM-80-08 - An Overview of the Test Procedure and How it is Used for ENERGY STAR® IESNA LM-80-08 - An Overview of the Test Procedure and How it is Used for ENERGY STAR® This October 30, 2008 webcast provided an overview of LM-80-08, Approved Method for Measuring Lumen Maintenance of LED Light Sources, and how DOE's ENERGY STAR program for Solid-State Lighting (SSL) Luminaires will use LM-80 to estimate lifetime for qualified SSL Luminaires. Richard

  16. IG.EIGPT.PIA.pdf

    Energy Savers [EERE]

    ENERGY STAR® | Department of Energy IESNA LM-80-08 - An Overview of the Test Procedure and How it is Used for ENERGY STAR® IESNA LM-80-08 - An Overview of the Test Procedure and How it is Used for ENERGY STAR® This October 30, 2008 webcast provided an overview of LM-80-08, Approved Method for Measuring Lumen Maintenance of LED Light Sources, and how DOE's ENERGY STAR program for Solid-State Lighting (SSL) Luminaires will use LM-80 to estimate lifetime for qualified SSL Luminaires. Richard

  17. Webcast of the 'Energy 101' Course Framework

    Broader source: Energy.gov [DOE]

    Energy 101: A Model Interdisciplinary Higher Education Course for Teaching the Fundamentals of Energy

  18. EPA ENERGY STAR Webcast: Portfolio Manager 201

    Broader source: Energy.gov [DOE]

    Continue to learn about EPAs new ENERGY STAR Portfolio Manager tool, with a deeper dive into more advanced functionalities such as: managing and tracking changes to your property uses over time;...

  19. EPA ENERGY STAR Webcast: Portfolio Manager 101

    Broader source: Energy.gov [DOE]

    Join us as we introduce and demonstrate the core functionality of EPA’s new ENERGY STAR Portfolio Manager tool. Attendees will learn how to: navigate the new Portfolio Manager; add a property and...

  20. EPA ENERGY STAR Webcast: Portfolio Manager 101

    Broader source: Energy.gov [DOE]

    Join us as we introduce and demonstrate the core functionality of EPAs new ENERGY STAR Portfolio Manager tool. Attendees will learn how to: navigate the new Portfolio Manager; add a property and...

  1. Text-Alternative Version: Webcast on BITES

    Broader source: Energy.gov [DOE]

    AUSTIN BROWN: Thanks, Matt. By way of refresher, my name is Austin Brown, and I'm an analyst with the National Renewable Energy Lab in Washington, DC and I am also an adjunct facility member at...

  2. EPA ENERGY STAR Webcast- Portfolio Manager 201

    Broader source: Energy.gov [DOE]

    Continue to learn about EPA’s new ENERGY STAR Portfolio Manager tool, with a deeper dive into more advanced functionalities such as: managing and tracking changes to your property uses over time;...

  3. EPA ENERGY STAR Webcast: Portfolio Manager 201

    Broader source: Energy.gov [DOE]

    Continue to learn about EPA’s new ENERGY STAR Portfolio Manager tool, with a deeper dive into more advanced functionalities such as: managing and tracking changes to your property uses over time;...

  4. EPA ENERGY STAR Webcast- Portfolio Manager 101

    Broader source: Energy.gov [DOE]

    Join us as we introduce and demonstrate the core functionality of EPA’s new ENERGY STAR Portfolio Manager tool. Attendees will learn how to: navigate the new Portfolio Manager; add a property and...

  5. Fan System Assessment Tool Introduction - Webcast

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and other instruments as measurement tools in a fan performance test Develop a ... optimization savings When using FSAT keep in mind that: FSAT is best for the big picture. ...

  6. Guide to FEMP-Designated Parking Lot Lighting

    Office of Energy Efficiency and Renewable Energy (EERE)

    Document provides acquisition guidance and federal efficiency requirements across a variety of product categories, including outdoor pole-arm-mounted area and roadway luminaires, which are a FEMP-designated product category. Federal laws and executive orders mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  7. CALiPER: Troffers, Kits, and Tubes | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Resources » Webcasts » CALiPER: Troffers, Kits, and Tubes CALiPER: Troffers, Kits, and Tubes This June 20, 2013 webcast reviewed the recently completed CALiPER Study, Recessed Troffer Lighting, in which a group of lighting designers, engineers, and facility managers compared the performance of conventional fluorescent troffers with T8 LED tube retrofits, LED retrofit kits, and dedicated LED troffers. Troffers (1'×4', 2'×2', and 2'×4') comprise more than half of all luminaires

  8. CALiPER Snapshot Report: Indoor LED Luminaires

    SciTech Connect (OSTI)

    2014-04-01

    Snapshot reports use data from DOE's LED Lighting Facts product list to compare the LED performance to standard technologies, and are designed to help lighting retailers, distributors, designers, utilities, energy efficiency program sponsors, and other stakeholders understand the current state of the LED market and its trajectory.

  9. Energy Department Announces Winners of Next Generation Luminaires...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solid-state lighting (SSL), which includes LED and organic light emitting diode (OLED) ... evaluated the entries based on characteristics such as color, illuminance, glare ...

  10. LED Luminaire Lifetime: Recommendations for Testing and Reporting

    Broader source: Energy.gov (indexed) [DOE]

    ... As of July 2013, 200 sample lamps had been continuously tested at a 45 o C ambient temperature for over 25,000 hours. This is perhaps the largest publicly available data set on LED ...

  11. OLED Luminaire with Panel Integrated Drivers and Advanced Controls |

    Broader source: Energy.gov (indexed) [DOE]

    OFFICE OF INSPECTOR GENERAL REPORT ON INSPECTION OF THE SECRETARY OF ENERGY'S FOREIGN TRAVEL Report No: DOE/IG-0397 Office of Inspections Date Issued: October 7, 1996 Washington, D.C. 20585 i REPORT ON INSPECTION OF THE SECRETARY OF ENERGY'S FOREIGN TRAVEL TABLE OF CONTENTS PAGE I. INTRODUCTION AND PURPOSE..................................................................................... 1 II. SCOPE AND

  12. System Reliability Model for Solid-State Lighting Luminaires...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    712,234 Project Term: 9162011 - 9302016 Funding Opportunity: Solid State Lighting Core Technology Funding Opportunity Announcement (DE-FOA- 0000329) Project Objective The ...

  13. UDC Develops Prototype High-Efficiency OLED Undercabinet Luminaire

    Broader source: Energy.gov [DOE]

    Universal Display Corporation (UDC) has demonstrated the real-world application of a novel lighting technology by developing two pre-prototype OLED undercabinet lighting systems that exceed 420 total lumens at an efficacy of more than 55 lm/W, with an estimated lifetime (LT70) in excess of 10,000 hours, and a color rendering index (CRI) greater than 85.

  14. High Quality Down Lighting Luminaire with 73% Overall System Efficiency

    SciTech Connect (OSTI)

    Robert Harrison; Steven C. Allen; Joseph Bernier; Robert Harrison

    2010-08-31

    This report summarizes work to develop a high flux, high efficiency LED-based downlight at OSRAM SYLVANIA under US Department of Energy contract DE-FC26-08NT01582. A new high power LED and electronic driver were developed for these downlights. The LED achieved 100 lumens per watt efficacy and 1700 lumen flux output at a correlated color temperature of 3500K. The driver had 90% electrical conversion efficiency while maintaining excellent power quality with power factor >0.99, and total harmonic distortion <10%. Two styles of downlights using the LED and driver were shown to exceed the project targets for steady-state luminous efficacy and flux of 70 lumens per watt and 1300 lumens, respectively. Compared to similar existing downlights using compact fluorescent or LED sources, these downlights had much higher efficacy at nearly the same luminous flux.

  15. DOE Publishes Report on Accelerated Life Testing of SSL Luminaires...

    Energy Savers [EERE]

    The U.S. Department of Energy (DOE) has published the findings of a new study utilizing a highly accelerated life-test method (called the "hammer test") intended to produce ...

  16. Covered Product Category: Industrial Luminaires (High/Low Bay...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2' x 4' 85 1' x 8' 88 High Bay, Non-Linear, Metal Halide Distribution Pattern Input ... ballasts, which should be considered in the comparison of the two system types. ...

  17. High-Performance OLED Panel and Luminaire | Department of Energy

    Energy Savers [EERE]

    1, 2014 - March 31, 2016 Funding Opportunity: SSL R&D Funding Opportunity Announcement (FOA) (DE-FOA-0000973) Project Objective This project seeks to develop and integrate ...

  18. An Integrated Solid-State LED Luminaire for General Lighting

    SciTech Connect (OSTI)

    Kevin Dowling; Fritz Morgan Ihor Lys; Mike Datta; Bernd Keller; Thomas Yuan

    2009-03-31

    A strong systems approach to designing and building practical LED-based replacement lamps is lacking. The general method of taking high-performance LEDs and marrying them to standard printed circuit boards, drivers and a heat sink has fallen short of the promise of LED lighting. In this program, a top-down assessment of requirements and a bottom-up reinvention of LED sources, electronics, optics and mechanics have resulted in the highest performance lamp possible. The team, comprised of Color Kinetics, the leaders in LED lighting and Cree, the leaders in LED devices took an approach to reinvent the package, the driver and the overall form and aesthetic of a replacement source. The challenge was to create a new benchmark in LED lighting - the resultant lamp, a PAR38 equivalent, met the light output, color, color quality and efficacy marks set out in the program as well as being dimmable, which is important for market acceptance. The approach combined the use of multiple source die, a chip-on-board approach, a very efficient driver topology, the use of both direct emission and phosphor conversion, and a unique faceted optic to avoid the losses, artifacts and hotspots of lensed approaches. The integral heat sink provided a mechanical base and airflow using a chimney-effect for use in a wide variety of locations and orientations. These research results led to a much better understanding of the system effects of component level technologies. It was clear that best-of-breed sub-system results do not necessarily result in the best end result for the complete system. In doing this work, we did not neglect the practical aspects of these systems. These were not rarified results and commercially impractical but lent themselves to eventual commercial products in the marketplace. The end result - a high performance replacement lamp - will save significant energy while providing a high-quality light source.

  19. NEXT GENERATION LUMINAIRES INDOOR JUDGING 2014 | Department of Energy

    Energy Savers [EERE]

    NEPA Reports and Records of Decision NEPA Reports and Records of Decision Report of the Review of the Hanford Solid Waste Environmental Impact Statement regarding Data Quality Control and Management Issues - As part of the litigation involving receipt of offsite waste and the HSW EIS, the Court allowed the State of Washington a limited amount of discovery pertaining to iodine-129, technetium-99, and groundwater analyses. While compiling information to respond to the State discovery request,

  20. System Reliability Model for Solid-State Lighting Luminaires | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Presenter: Lynn Davis, RTI International This project is developing and validating a probabilistic reliability prediction tool, and accelerated life testing methodologies, to help lighting manufacturers and stakeholders answer two questions: (1) How can the promised reliability for a rapidly changing technology platform be ensured?, and (2) What will the usage and maintenance profiles be for a product that lasts 15 years? Solid-state lighting (SSL) is described as being highly

  1. System Reliability Model for Solid-State Lighting Luminaires | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Lead Performer: RTI International - Research Triangle Park, NC Partner: Auburn University - Auburn, AL DOE Total Funding: $2,848,942 Cost Share: $712,234 Project Term: September 16, 2011 - September 30, 2016 Funding Opportunity: Solid State Lighting Core Technology Funding Opportunity Announcement (DE-FOA- 0000329) Project Objective The primary objectives of the proposed work will be to develop and validate a reliability model and accelerated life testing (ALT) methodologies for

  2. RTI International Develops Ssl Luminaire System Reliability Model

    Broader source: Energy.gov [DOE]

    With the help of DOE funding, RTI International is developing and validating accelerated life testing (ALT) methodologies and reliability models for predicting the lifetime of integrated solid...

  3. CBEA High-Efficiency Parking Structure Lighting Specification | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy CBEA High-Efficiency Parking Structure Lighting Specification CBEA High-Efficiency Parking Structure Lighting Specification A Commercial Building Energy Alliance Project, Version 1.1. Released 2/15/2012. creea_parking_structure_spec.pdf (245.84 KB) More Documents & Publications CBEA LED Site Lighting Specification - Version 1.3, Released 2/15/2012 LED T8 Replacement Lamps Model Specification for LED Roadway Luminaires, V2.0

  4. REA Refrigerated Display Case LED Lighting Performance Specification |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy REA Refrigerated Display Case LED Lighting Performance Specification REA Refrigerated Display Case LED Lighting Performance Specification A Retailer Energy Alliances (REA) Project rea_refrig_display_spec.pdf (300.24 KB) More Documents & Publications CBEA LED Site Lighting Specification - Version 1.3, Released 2/15/2012 Model Specification for LED Roadway Luminaires, V2.0 CBEA High-Efficiency Parking Structure Lighting Specification

  5. 2010 Municipal Consortium Southwest Region Workshop Materials | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy 0 Municipal Consortium Southwest Region Workshop Materials 2010 Municipal Consortium Southwest Region Workshop Materials This page provides links to the presentations given at the DOE Municipal Solid-State Street Lighting Consortium Southwest Region Workshop, held in Los Angeles on September 30, 2010. Presentations City of Los Angeles: LED Roadway Luminaire Specifications Ed Ebrahimian and Orlando Nova, City of Los Angeles Southwest Regional Workshop: Cost Savings and Finance

  6. Demonstration Assessment of LED Roadway Lighting: Philadelphia...

    Office of Scientific and Technical Information (OSTI)

    Close Cite: Bibtex Format Close 0 pages in this document matching the terms "" Search For Terms: Enter terms in the toolbar above to search the full text of this document for ...

  7. Save Energy Now Webcast: Energy Assessments: What are the Benefits...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... energy resource management Turbine-PRV management Condensing turbine operations Steam end-use management - Distribution system investigations Condensate and ...

  8. Text-Alternative Version: Dimming LEDs Webcast | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Well as many people know LED dimming delivers many other value propositions to LED ... and this is particularly relevant for people who are experienced dimming light sources ...

  9. EPA ENERGY STAR Webcast: Value of ENERGY STAR Certification

    Broader source: Energy.gov [DOE]

    For thousands of organizations, ENERGY STAR is the simple choice for saving money and demonstrating environmental leadership to the public. Lower energy costs aren't the only financial benefit of...

  10. Tuesday Webcast for Industry: Enegaging Supply Chains in Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... and our requirements to identify best practices and other opportunities for improvement. ... Suppliers can also quantify benefits by benchmarking one site versus another and ...

  11. Tuesday Webcasts for Industry: Tax Rebates/Credits Available...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    upgrades (savings and costs) Step 2: Search for available incentives Step 3: ... identified and vetted. * Focus on Energy works with customers to find a suitable project. ...

  12. Webcast of the National Training and Education Resource (NTER)

    Broader source: Energy.gov [DOE]

    On December 6, 2012 the Department of Energy held an introductory webinar for the National Training & Education Resource (NTER). NTER is designed to revolutionize how online training and education...

  13. Webcast of the National Training and Education Resource (NTER)

    Office of Energy Efficiency and Renewable Energy (EERE)

    On December 6, 2012 the Department of Energy held an introductory webinar for the National Training & Education Resource (NTER). NTER is designed to revolutionize how online training and...

  14. Tuesday Webcasts for Industry: Engaging Supply Chains in Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... * 2010 ENERGY STAR Partner of the Year - Kroger, Land O Lakes, Rudolph, Oak State, Roskam ... energy use benchmarking tool by the EPA - Kroger and Land O Lakes have been key leaders in ...

  15. EECBG Strategies and Considerations Approaching Lenders Webcast (Text Version)

    Broader source: Energy.gov [DOE]

    Below is a text version of the December 3, 2009 What Drives Consumer Borrowing for Energy Efficiency?

  16. Process Heating Assessment and Survey Tool (PHAST) Introduction - Webcast

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Process Heating Assessment and Survey Tool (PHAST) Introduction Date: January 30, 2007 Instructor: Dr. Arvind Thekdi Agenda ESA Training Web Cast Introduction - 15 minutes Process Heating Assessment and Survey Tool (PHAST) Software Demonstration - 45 minutes Q & A - 20 minutes PHAST BestPractices- 30 minutes Q & A - 20 minutes Conclusion - 10 minutes Reference Information DOE Resources Calendar for Future ESA Training Web Casts Process Heating ESA Plant Lead Web Cast Purpose: Help Plant

  17. Tuesday Webcast for Industry: Establishing and Maintaining a...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... These could include: * Uncertainty over the long-term plans to continue owning or operating the facility * Uncertainty over whether the project will perform as anticipate (i.e., ...

  18. DOE Webcast: Intra-organization Energy Efficiency Competitions

    Broader source: Energy.gov [DOE]

    The Maine Ocean & Wind Industry Initiative will host a webinar to provide an update on the Bureau of Ocean Energy Management's (BOEM's) Offshore Renewable Energy Program. The webinar will cover...

  19. Three-Part TINSSL Webinar Series: Understanding and Evaluating LM-79 &

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LM-80 Reports for SSL Technology | Department of Energy Webcasts » Three-Part TINSSL Webinar Series: Understanding and Evaluating LM-79 & LM-80 Reports for SSL Technology Three-Part TINSSL Webinar Series: Understanding and Evaluating LM-79 & LM-80 Reports for SSL Technology This three-day webinar series focused on the fundamentals of LM-79 and LM-80 luminaire testing requirements and the use of a checklist procedure for analyzing test reports. Participants also had the opportunity

  20. News and Events | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research & Development » Technology Application R&D » Municipal Consortium » News and Events News and Events This page contains links to Consortium news as well as events and activities ranging from national and regional workshops to webcasts. Questionnaire The MSSLC Technical Committee's Equivalency Task Force has drafted a questionnaire to better characterize common street and roadway lighting applications. The knowledge gleaned from the questionnaire may help to inform the design

  1. Scalable Light Module for Low-Cost, High Efficiency LED Luminaires

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Mechanical stability with minimal BOM 6 Progress and Accomplishments LEDs: higher ... have been presented at recent DOE SSL Manufacturing and R&D Workshops Project Integration ...

  2. EATON PURSUES PRINT-BASED MANUFACTURING OF INTEGRATED, LOW-COST, HIGH-PERFORMANCE SSL LUMINAIRES

    Broader source: Energy.gov [DOE]

    With the help of DOE funding, Eaton is using manufacturing process innovation to develop a way to place the LED package, chip, or chip array directly on a fixture or heat sink in order to improve...

  3. Low-Cost Light-Emitting Diode Luminaire for General Illumination...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    organic light-emitting diode (WOLED) using a single emitter on a planar glass substrate. ... A single-doped WOLED that addresses manufacturing and performance issues can help meet the ...

  4. SSL Luminaire Performance in the Lab: Just How Well Do They Perform...

    Energy Savers [EERE]

    Laboratory, gave an overview of the Commercially Available LED Product Evaluation and Reporting (CALiPER) Program, test procedures for SSL products, and recent test results. ...

  5. Scalable Light Module for Low-Cost, High Efficiency LED Luminaires

    Broader source: Energy.gov [DOE]

    Lead Performer: Cree, Inc. – Durham, NCDOE Total Funding: $2,349,704Cost Share: $2,349,704Project Term: 8/1/2013 – 7/31/2015Funding Opportunity: SSL Manufacturing R&D Funding Opportunity...

  6. Scalable Light Module for Low-Cost, High Efficiency LED Luminaires...

    Broader source: Energy.gov (indexed) [DOE]

    ...2013 - 7312015 Funding Opportunity: SSL Manufacturing R&D Funding Opportunity Announcement (FOA) DE-FOA-000079 Project Objective This project plans to develop a versatile, ...

  7. RTI International and Finelite Develop Luminaires for Advanced Lighting in the Classroom

    Office of Energy Efficiency and Renewable Energy (EERE)

    Energy costs for lighting are a large operational expense for schools and universities, where – despite clear evidence that adjusting lighting levels and chromaticity to the task at hand improves...

  8. Low-Cost Light-Emitting Diode Luminaire for General Illumination

    Broader source: Energy.gov [DOE]

    This project is demonstrating an efficient and stable white organic light-emitting diode (WOLED) using a single emitter on a planar glass substrate.

  9. Municipal Consortium Releases Updated Model Specification for LED Roadway

    Broader source: Energy.gov (indexed) [DOE]

    Origin of Contamination in Many Devils Wash, Shiprock, New Mexico | Department of Energy Multivariate Statistical Analysis of Water Chemistry in Evaluating the Origin of Contamination in Many Devils Wash, Shiprock, New Mexico Multivariate Statistical Analysis of Water Chemistry in Evaluating the Origin of Contamination in Many Devils Wash, Shiprock, New Mexico (13.53 MB) More Documents & Publications Application of Environmental Isotopes to the Evaluation of the Origin of Contamination

  10. Demonstration Assessment of Light-Emitting Diode (LED) Roadway...

    Office of Scientific and Technical Information (OSTI)

    The LEDs had an average illuminance level of 0.91 foot candles compared to 1.29 fc for the HPS lamps. The LED luminairesmore cost 38,000 more than HPS lamps, yielding a lengthy ...

  11. Text-Alternative Version: Model Specification for LED Roadway...

    Energy Savers [EERE]

    ... at the IES Street and Area Lighting Conference. ... It doesn't address lighting control systems. So adaptive dimming, remote ... can become a real burden for this new technology. ...

  12. NREL: Transportation Research - E-Roadway Animation (Text Version...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Driver returns home and connects to wireless charger. After confirming departure time, the vehicle automatically determines the time to start charging. Time lapse to early morning. ...

  13. Technical Feasibility Assessment of LED Roadway Lighting on the...

    Office of Scientific and Technical Information (OSTI)

    which would reduce energy use and maintenance without compromising the quantity or ... but these products might actually increase maintenance due to the shorter rated lamp life. ...

  14. Demonstration Assessment of Light-Emitting Diode Roadway Lighting...

    Office of Scientific and Technical Information (OSTI)

    Authors: Myer, Michael ; Hazra, Oindrila ; Kinzey, Bruce R. Publication Date: 2011-12-01 OSTI Identifier: 1074332 Report Number(s): PNNL-21022 BT0301000 DOE Contract Number: ...

  15. EPA ENERGY STAR Webcast: Portfolio Manager Office Hours, Focus Topic: Sharing Forward and Transfer Ownership

    Broader source: Energy.gov [DOE]

    Portfolio Manager "Office Hours" is a live webinar that gives all users an opportunity to ask their questions directly to EPA in an open forum. In 2014, Office Hours will be held once a month. We...

  16. EPA ENERGY STAR Webcast: Benchmarking Water/Wastewater Treatment Facilities in Portfolio Manager

    Broader source: Energy.gov [DOE]

    Learn how to track the progress of energy efficiency efforts and compare the energy use of wastewater treatment plants to other peer facilities across the country. Attendees will learn how to...

  17. EPA ENERGY STAR Webcast- Successes in Sustainability: Tenants and Landlords Team Up on Energy

    Broader source: Energy.gov [DOE]

    Achieving top-level performance in a multi-tenant office building has its challenges. Landlords must consider the many factors that contribute to a building’s energy efficiency, such as building...

  18. EPA Webcast- Creating a Green Infrastructure Plan to Transform Your Community

    Broader source: Energy.gov [DOE]

    Green infrastructure approaches, such as incorporating trees and rain gardens into street designs, can help communities better manage stormwater while achieving other environmental, public health,...

  19. Text-Alternative Version: Webcast of the The Energy 101 Course Framework

    Broader source: Energy.gov [DOE]

    JIM TURNER: Welcome to today's webinar on Energy 101. I am Jim Turner, Director of Energy Programs at APLU and I will be today's moderator. At the outset, I must say that we are very pleased that...

  20. DOE TAP Webcast 17: State Policies to Encourage Green Building Principles

    Broader source: Energy.gov [DOE]

    Colorado Green Government Program, recent Colorado legislation supporting renewable energy and energy efficiency, state buildings

  1. Text-Alternative Webcast of the Energy Literate Citizenry from K-to-Gray

    Broader source: Energy.gov [DOE]

    Michelle Fox: Hi, good afternoon everyone and welcome to today's webinar on energy literacy. Thank you for joining. I want to thank also the Department of Education for their Green Strides Webinar...

  2. Text-Alternative Webcast of the National Training and Education Resource (NTER)

    Broader source: Energy.gov [DOE]

    MICHELLE FOX: Hi, welcome everyone. I wanted to say thank you for joining our webinar on the National Training and Education Resource. I would like to begin with some quick Introductions.  I am...

  3. EPA ENERGY STAR Webcast: Portfolio Manager Office Hours, Focus Topic: Responding to a Data Request

    Broader source: Energy.gov [DOE]

    Portfolio Manager "Office Hours" is a live webinar that gives all users an opportunity to ask their questions directly to EPA in an open forum. We will plan to spend the first 20-30 minutes of each...

  4. DOE TAP Webcast 17: State Policies to Encourage Green Building Principles

    Broader source: Energy.gov [DOE]

    North Carolina Utility Savings Initiative, energy efficiency in state and public facilities, review of state utility bills

  5. Microsoft PowerPoint - webcast_of_energy_education_and_bites...

    Office of Environmental Management (EM)

    Training o Commercial Building Technician Training o Web-Based Training Locator Cross-Cutting EWD Efforts Web Site - Materials - Interagency Coordination - Outreach - ...

  6. EPA ENERGY STAR Webcast: ENERGY STAR and Green Building Rating Systems

    Broader source: Energy.gov [DOE]

    During this session, attendees will learn how to use EPA tools and resources to help meet requirements for green building rating systems such as the U.S. Green Building Council’s Leadership in...

  7. EPA ENERGY STAR Webcast- Portfolio Manager Office Hours, Focus Topic: Weather Data and Metrics

    Broader source: Energy.gov [DOE]

    Portfolio Manager "Office Hours" is a live webinar that gives all users an opportunity to ask their questions directly to EPA in an open forum. In 2014, Office Hours will be held once a month. We...

  8. Webcast of the Energy Literate Citizenry from K-to-Gray

    Broader source: Energy.gov [DOE]

    The Energy Literacy Framework webinar was held on February 6, 2013 at 4 pm EST. It focused on outlining the Energy Literacy Framework, which identifies concepts every citizen should know to be...

  9. EPA ENERGY STAR Webcast: Benchmarking Water/Wastewater Treatment Facilities in Portfolio Manager

    Broader source: Energy.gov [DOE]

    Learn how to track the progress of energy efficiency efforts and compare the energy use of wastewater treatment plants to other peer facilities across the country. Attendees will learn how to measure and track energy use and carbon dioxide emission reductions in water and wastewater treatment plants to establish baseline energy use, prioritize investments, set goals, and track improvements over time.

  10. EPA ENERGY STAR Webcast- Portfolio Manager® Office Hours, Focus Topic: Portfolio Manager 2015 Priorities

    Broader source: Energy.gov [DOE]

    Portfolio Manager "Office Hours" is a live webinar that gives all users an opportunity to ask their questions directly to EPA in an open forum. We will plan to spend the first 20-30 minutes of each...

  11. LED Outdoor Area Lighting Fact Sheet

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Light distribution and glare LED luminaires use different optics than MH or HPS lamps ... illuminance are possible with LEDs and close-coupled optics, compared to HID luminaires. ...

  12. Energy Department Announces Outdoor Winners of Next Generation...

    Energy Savers [EERE]

    Luminaires(tm) Solid-State Lighting Design Competition Energy Department Announces Outdoor Winners of Next Generation Luminaires(tm) Solid-State Lighting Design Competition ...

  13. DOE SSL Postings: November 10, 2015, issue

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    West Parking Garage combined 252 metal halide (MH) luminaires that operated after dark with fluorescent luminaires that operated during daylight hours. In early 2013, the...

  14. SSL Postings, January 22, 2015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    environments. To learn more about how this type of environment affects LED lumen and color maintenance, luminaire efficacy, and luminaire component lifetimes, DOE's GATEWAY...

  15. DOE Publishes GATEWAY Report on Pedestrian Friendly Outdoor Lighting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Luminaires with less optical punch and less sharp angular variation in candlepower may provide a softer, more visually comfortable lighted environment. Luminaires delivering ...

  16. Microsoft PowerPoint - webcast_of_energy_education_and_bites_presentation_11_19_2012 (4).pptx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Education & Workforce Development Webinar: Energy Education and BITES Matthew Garcia AAAS Science & Technology Fellow EERE-EEWD November 19 th , 2012 2 | Education & Workforce Development eere.energy.gov Webinar Agenda Energy Education and the use of IT, simulations and other online learning tools in energy education DOE-Education and Workforce Development: Overview of EWD, Energy literacy and Energy 101 and IT strategy Matthew Garcia- EERE EWD- AAAS Science and Technology Policy

  17. U.S. Dept of Energy’s EECBG-SEP Technical Assistance Program Webcast ESPC Investment Grade Audit

    Broader source: Energy.gov [DOE]

    Learn what the investment grade audit is, what to expect from an investment grade audit, how to ensure IGA success.

  18. DOE Announces Webinars on Geothermal FORGE Initiative, National...

    Broader source: Energy.gov (indexed) [DOE]

    ... Register to attend the webinar. August 12: Live Webcast on Propane Vehicle Fueling ... webcast titled "Costs Associated with Propane Vehicle Fueling Infrastructure" on ...

  19. February 17, 2015 SEAB Meeting Minutes | Department of Energy

    Office of Environmental Management (EM)

    Better Buildings Neighborhood Program Webcast | Department of Energy February 13, 2013 Webinar: Preliminary Process and Market Evaluation - Better Buildings Neighborhood Program Webcast February 13, 2013 Webinar: Preliminary Process and Market Evaluation - Better Buildings Neighborhood Program Webcast February 13, 2013 Webinar: Preliminary Process and Market Evaluation - Better Buildings Neighborhood Program Webcast ; Better Buildings Neighborhood Program; national program with a goal of

  20. Text-Alternative Version: LED Essentials- Technology, Applications, Advantages, Disadvantages

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the LED Essentials - Technology, Applications, Advantages, Disadvantages webcast.

  1. Adoption of Light-Emitting Diodes in Common Lighting Applications

    SciTech Connect (OSTI)

    Yamada, Mary; Chwastyk, Dan

    2013-05-01

    Report estimating LED energy savings in nine applications where LEDs compete with traditional lighting sources such as incandescent, halogen, high-pressure sodium, and certain types of fluorescent. The analysis includes indoor lamp, indoor luminaire, and outdoor luminaire applications.

  2. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... In the project, six light-emitting diode (LED) luminaires were installed to replace six existing high pressure sodium (HPS) luminaires mounted on 14-foot poles on a set of exterior ...

  3. FEMP Updates Product Energy-Efficiency Requirements

    Broader source: Energy.gov [DOE]

    FEMP updated energy-efficiency requirements for Federal procurement of commercial boilers, water-cooled ice machines, and industrial (high/low bay) luminaires, and established new efficiency requirements for suspended luminaires.

  4. Design Competitions | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    words Logo consisting of the words 'Next Generation Luminaires,' with each word on its own line. 'Next' and 'Generation' are in black and 'Luminaires' is in gray uppercase letters. ...

  5. Energy Efficiency of LEDs

    Broader source: Energy.gov [DOE]

    This fact sheet discusses the current state of the LED market and discusses package efficacy, luminaire efficacy, and application efficacy.

  6. Demonstration Assessment of Light-Emitting Diode (LED) Post-Top Lighting at Central Park in New York City

    SciTech Connect (OSTI)

    Myer, Michael; Goettel, Russell T.; Kinzey, Bruce R.

    2012-09-30

    A review of five post-top light-emitting diode (LED) pedestrian luminaires installed in New York City's Central Park for possible replacement to the existing metal halide post-top luminaire. This report reviews the energy savings potential and lighting delivered by the LED post-top luminaires.

  7. Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting on Residential and Commercial Streets in Palo Alto, CA

    SciTech Connect (OSTI)

    Myer, Michael; Kinzey, Bruce R.; Tam, Christine

    2010-06-24

    This report is part of a GATEWAY demonstration that replaced existing HPS streetlights with two different types of LED products and one induction product. Energy savings ranged from 6% to 44%.

  8. Demonstration Assessment of Light-Emitting Diode Roadway Lighting on the FDR Drive in New York, New York

    SciTech Connect (OSTI)

    Myer, Michael; Hazra, Oindrila; Kinzey, Bruce R.

    2011-12-01

    This a report about a field study of light-emitting diodes street lights by four different manufacturers installed on the FDR Drive in New York City, NY.

  9. Videos | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in Motion Google+ STEM Hangout Webcast of the Energy Literate Citizenry from K-to-Gray What's Your Energy Pledge? Conversation on the Future of the Wind Industry Webcast of...

  10. Notices

    Energy Savers [EERE]

    site at: http: whitehouse.govostppcast. A live video webcast and an archive of the webcast after the event are expected to be available at http:whitehouse.govostp pcast. ...

  11. Text-Alternative Version: Hitting the Target: ENERGY STAR® SSL Outdoor Area Lighting

    Office of Energy Efficiency and Renewable Energy (EERE)

    Below is the text-alternative version of the Hitting the Target: ENERGY STAR® SSL Outdoor Area Lighting Webcast.

  12. Discover the New Better Buildings Residential Program Solution Center

    Broader source: Energy.gov [DOE]

    A transcript of "Discover the New Better Buildings Residential Program Solution Center," Better Buildings Neighborhood Program Webcast, June 19, 2014.

  13. A Look Behind the Texas Renewable Portfolio Standard

    Broader source: Energy.gov [DOE]

    David Hurlbut's presentation for the Technical Assistance Project for State and Local Officials (TAP) April 16, 2008 Webcast.

  14. DOE FreedomCAR and vehicle technologies program advanced power electronics and electrical machines annual review report

    SciTech Connect (OSTI)

    None, None

    2005-06-16

    A report that lists Attendees, Webcast Attendance Report, Summary of Reviewer's Ratings Grouped by Research Areas and Reviewer Comments.

  15. Energy Management and Financing

    Office of Energy Efficiency and Renewable Energy (EERE)

    This Tuesday Webcast for Industry covers how to become a Certified Energy Manager and Certified Practitioner in Energy Management Systems

  16. Energy Assessments

    Broader source: Energy.gov [DOE]

    This Tuesday Webcast for Industry addresses the implementation guide and features a best practice presentation from Raytheon

  17. Power Electronics and Electric Machines Merit Review, May 2005

    Broader source: Energy.gov [DOE]

    A report that lists Attendees, Webcast Attendance Report, Summary of Reviewer's Ratings Grouped by Research Areas and Reviewer Comments

  18. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    Technical Feasibility Assessment of LED Roadway Lighting on the Golden Gate Bridge Tuenge Jason R LED induction ceramic metal halide plasma roadway lighting Golden Gate Bridge LED...

  19. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    Demonstration Assessment of LED Roadway Lighting Philadelphia PA Royer Michael P Tuenge Jason R Poplawski Michael E Roadway Lighting Solid state lighting LED lighting SSL LED...

  20. Guide to FEMP-Designated Parking Lot Lighting

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TABLE OF CONTENTS 1 INTRODUCTION * FEMP-DESIGNATED PRODUCTS * ENERGY EFFICIENCY METRICS 3 DESIGN PROCESS * STEP-BY-STEP OVERVIEW 6 COMPONENTS OF THE DESIGN * DESIGN CONSIDERATIONS * LIGHTING DESIGN CONSIDERATIONS * LUMINAIRE DISTRIBUTION * COLOR QUALITIES * LIGHT SPECTRUM 13 PARKING LOT LIGHTING DESIGN * DESIGN SCENARIO OVERVIEW * DESIGN SCENARIO - GENERAL LUMINAIRE * DESIGN SCENARIO - FEMP-DESIGNATED LUMINAIRE 17 LIGHTING CONTROLS SAVE ENERGY * STATIC CONTROLS * MULTI-LEVEL CONTROLS 20

  1. System Reliability for LED-Based Products

    SciTech Connect (OSTI)

    Davis, J Lynn; Mills, Karmann; Lamvik, Michael; Yaga, Robert; Shepherd, Sarah D; Bittle, James; Baldasaro, Nick; Solano, Eric; Bobashev, Georgiy; Johnson, Cortina; Evans, Amy

    2014-04-07

    Results from accelerated life tests (ALT) on mass-produced commercially available 6” downlights are reported along with results from commercial LEDs. The luminaires capture many of the design features found in modern luminaires. In general, a systems perspective is required to understand the reliability of these devices since LED failure is rare. In contrast, components such as drivers, lenses, and reflector are more likely to impact luminaire reliability than LEDs.

  2. LED Street Lighting Conversion Workshop Presentations | Department of

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy View the video about CALiPER Report Series 21 on LED Linear Lamps and Troffer Lighting, featuring interviews with Tracy Beeson and Naomi Miller of Pacific Northwest National Laboratory. View the text-alternative version Department of Energy

    Luminaire Lifetime: September 2014 (774.47 KB) More Documents & Publications System Reliability Model for Solid-State Lighting Luminaires LED LUMINAIRE LIFETIME: Recommendations for Testing and Reporting Lifetime and

  3. NGL Downlight Demonstration Project: Alston & Bird, LLP, Law Offices |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy NGL Downlight Demonstration Project: Alston & Bird, LLP, Law Offices NGL Downlight Demonstration Project: Alston & Bird, LLP, Law Offices As of 2012, the U.S. Department of Energy (DOE) estimates 700 million downlight luminaires were installed in residential and commercial buildings; light-emitting diode (LED) luminaires represent less than 1% of this installed base. Downlight luminaires using conventional incandescent, halogen, and compact fluorescent lamps have

  4. Energy Department Announces Indoor Lighting Winners of Next Generation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Luminaires(tm) Solid-State Lighting Design Competition | Department of Energy Indoor Lighting Winners of Next Generation Luminaires(tm) Solid-State Lighting Design Competition Energy Department Announces Indoor Lighting Winners of Next Generation Luminaires(tm) Solid-State Lighting Design Competition September 17, 2014 - 5:45pm Addthis As part of the Obama Administration's efforts to reduce energy waste in U.S. buildings and help save Americans money by saving energy, the Energy Department

  5. Print-based Manufacturing of Integrated, Low Cost, High Performance SSL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Luminaires | Department of Energy Print-based Manufacturing of Integrated, Low Cost, High Performance SSL Luminaires Print-based Manufacturing of Integrated, Low Cost, High Performance SSL Luminaires Lead Performer: Eaton Corporation - Menomonee Falls, WI Partners: - Heraeus Materials Technology, LLC - Conshohocken, PA - Haiku Tech, Inc - Miami, FL - Eaton Cooper Lighting Innovation Center - Peachtree City, GA DOE Total Funding: $2,468,672 Cost Share: $2,468,676 Project Term: 9/15/2013 -

  6. Solid State Lighting Reliability

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... color shift to customer satisfaction of luminaires - Involves more than just the LED * Optics, power supply * Limitations on LM-80 data for LEDs - Accuracy depends on test length - ...

  7. GATEWAY Univ of Maryland Report | Department of Energy

    Energy Savers [EERE]

    August 2015 POSTINGS Next Generation Luminaire (NGL) Downlight Demonstration Project: St. Anthony's Hospital SSL Adoption by Museums: Survey Results, Analysis, and Recommendations...

  8. NOVEL TECHNOLOGIES DEVELOPED BY CREE LOWER THE COST OF HIGH-PERFORMANCE LED TROFFERS ON THE MARKET

    Broader source: Energy.gov [DOE]

    Cree used a comprehensive approach to reduce the costs of various optical, thermal, and electrical subsystems without impacting performance, resulting in an LED troffer luminaire platform emitting...

  9. Solid-State Lighting Early Lessons Learned on the Way to Market

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Specifying families of luminaires allows for a consistent look and feel throughout a space and can also standardize maintenance and spare parts. But manufacturers sometimes lack ...

  10. EATON PURSUES PRINT-BASED MANUFACTURING OF INTEGRATED, LOW-COST...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    number of configurations that are competitive with the most robust LED luminaire products. ... could reduce the integrated light engine price from 50klm at the project's inception to ...