Sample records for ritsche work supported

  1. Statement of Work-National Environmental Policy Act (NEPA) Support...

    Office of Environmental Management (EM)

    Work-National Environmental Policy Act (NEPA) Support Services Acquisition: Preparation and Review of Environmental Impact Statements, Environmental Assessments, Environmental...

  2. Technology Support for Libraries Employees Working from Home Policy

    E-Print Network [OSTI]

    Stowell, Michael

    Technology Support for Libraries Employees Working from Home Policy The Systems Department provides limited information technology support for L faculty who work at home and for staff who work campus guidelines and policies related to "mobile" computers. Systems will offer regular required

  3. Energy Advisors at Work: Charity Work Practices to Support People in Fuel Poverty

    E-Print Network [OSTI]

    Energy Advisors at Work: Charity Work Practices to Support People in Fuel Poverty Joel E. Fischer to people in fuel poverty. Our fieldwork comprises detailed observations that reveal the collaborative design challenges that relate the domestic fuel poverty setting to the wider Ubicomp literature. Our work

  4. Technical support section annual work plan for FY 1996

    SciTech Connect (OSTI)

    Adkissson, B.P.; Allison, K.L.; Hess, R.A.; Kunselman, C.W.; Odom, S.M.; Smelcer, D.R.

    1996-04-01T23:59:59.000Z

    The Technical Support Section (TSS) of the Instrumentation and Controls (I&C) Division of Oak Ridge National Laboratory (ORNL) provides technical services such as fabrication, modification, installation, calibration, operation, repair, and preventive maintenance of instruments and other related equipment. Work performed by TSS is in support of basic and applied research and development (R&D), engineering and instrument and computer systems managed by ORNL. It is the mission of TSS to support programs and policies of ORNL, emphasizing safety and ensuring cost-effective support for R&D. Because the activities and priorities of TSS must be adapted to the technical support needs of ORNL, the TSS Annual Work Plan is derived from and driven directly by current trends in the budgets and activities of each ORNL division for which TSS provides support. Trends that will affect TSS planning during this period are reductions in the staffing levels of some R&D programs because of attrition or budget cuts and the establishment of new facilities or environmental safety and health programs. TSS does not have an annual budget to cover operating expenses incurred in providing instrumentation maintenance support to ORNL. Each year TSS contacts ORNL division finance managers or division finance officers to obtain information concerning projected funding levels of programs and facilities they manage. Although TSS has no direct responsibility for the maintenance or repair of real property, it does perform breakdown maintenance, preventive maintenance and calibration of laboratory, production, and experimental equipment, all of which is used for programmatic purposes. Operating expense funds from supported divisions support this type of equipment.

  5. Tailoring Infrastructures: Supporting Cooperative Work with Configurable Email Filters

    E-Print Network [OSTI]

    -siegen.de Fraunhofer Institute for Applied Information Technology (FhG-FIT) Schloss Birlinghoven, 53754 Sankt Augustin, Germany volker.wulf@fit.fraunhofer.de Abstract. In fragmented work settings like network organizations or virtual organizations, monolithic approaches to implement support for collaboration would require

  6. Technical Support Section annual work plan for FY 1995

    SciTech Connect (OSTI)

    Adkisson, B.P.; Hess, R.A.; Kunselman, C.W.; Millet, A.J.; Smelcer, D.R.

    1994-10-01T23:59:59.000Z

    The Technical Support Section (TSS) of the Instrumentation and Controls (I and C) Division of Oak Ridge National Laboratory (ORNL) provides technical services such as fabrication, modification, installation, calibration, operation, repair, and preventive maintenance of instruments and other related equipment. Work performed by TSS is in support of basic and applied research and development (R and D), engineering, and instrument and computer systems managed by ORNL. Because the activities and priorities of TSS must be adapted to the technical support needs of ORNL, the TSS Annual Work Plan is derived from and driven directly by current trends in the budgets and activities of each ORNL division for which TSS provides support. Trends that will affect TSS planning during this period are reductions in the staffing levels of some R and D programs because of attrition or budget cuts and the establishment of new facilities or environmental safety and health programs. The ``Long-Range Work Plan`` is based on estimates of impact of the long-range priorities and directions of the Laboratory. Identifiable proposed new facilities and programs provide additional basis for long-range planning. After identifying long-range initiatives, TSS planning includes future training requirements, reevaluation of qualifications for new-hires, and identification of essential test equipment needed in new work.

  7. Statement of Work (SOW) Template (Combined EIR/ICE Support Contractor...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Statement of Work (SOW) Template (Combined EIRICE Support Contractor) Statement of Work (SOW) Template (Combined EIRICE Support Contractor) Contractor SOW Template - EIR &...

  8. Work Packages for Site Support Service at Los Alamos National...

    Energy Savers [EERE]

    controlled by the requirements of LANL Irnplementation Procedure IMP 300.2, Integrated Work Management for Work Activities. This documellt establishes the LANL Integrated Work...

  9. THE RELATIONSHIP BETWEEN HIGH INVOLVEMENT WORK SYSTEMS, SUPERVISORY SUPPORT, AND ORGANIZATIONAL EFFECTIVENESS: THE ROLE OF EMPLOYEE EXPERIENCES AT WORK

    E-Print Network [OSTI]

    Wadhwa, Preeti

    2012-08-31T23:59:59.000Z

    This study adopts a multilevel, multiple stakeholder perspective to examine the impact of high involvement work systems (HIWS) and supervisory support on organizational effectiveness. Organizational effectiveness is measured ...

  10. THE IMPACT OF WORK UNIT AND ORGANIZATION SUPPORT ON HOSPITAL PATIENT SAFETY

    E-Print Network [OSTI]

    Kemper, Carol Ann

    2009-01-27T23:59:59.000Z

    Based on the construct of a culture of safety, the study purpose was to discern the relationships between Organization Support (OS) and Work Unit Support (WS) on Hospital Patient Safety. OS and WS were operationalized ...

  11. Laboratory work in support of West Valley glass development

    SciTech Connect (OSTI)

    Bunnell, L.R.

    1988-05-01T23:59:59.000Z

    Over the past six years, Pacific Northwest Laboratory (PNL) has conducted several studies in support of waste glass composition development and testing of glass compositions suitable for immobilizing the nuclear wastes stored at West Valley, New York. As a result of pilot-scale testing conducted by PNL, the glass composition was changed from that originally recommended in response to changes in the waste stream, and several processing-related problems were discovered. These problems were solved, or sufficiently addressed to determine their likely effect on the glass melting operations to be conducted at West Valley. This report describes the development of the waste glass composition, WV-205, and discusses solutions to processing problems such as foaming and insoluble sludges, as well as other issues such as effects of feed variations on processing of the resulting glass. An evaluation of the WV-205 glass from a repository perspective is included in the appendix to this report.

  12. Physical Environments for Digital Libraries: Supporting In-Situ Collaborative Work and

    E-Print Network [OSTI]

    Francisco-Revilla, Luis

    Physical Environments for Digital Libraries: Supporting In-Situ Collaborative Work and Large Format@ischool.utexas.edu ABSTRACT Digital libraries build on a long history of interdisciplinary research combing the fields of libraries and digital technologies. Ironically, many digital libraries today are still narrowly focused

  13. The U.S. Support Program to IAEA Safeguards - How It Works

    SciTech Connect (OSTI)

    Nock,C.; Hoffheins,B.

    2008-07-13T23:59:59.000Z

    The U.S. Support Program to International Atomic Energy Agency (IAEA) Safeguards (USSP) was established in 1977 to transfer US technology and expertise to assist the IAEA Department of Safeguards because its limited budget and scope would not allow for R&D activities and the procurement of specialized or customized equipment. Over the years, the USSP and the Department of Safeguards have worked together continuously to develop and improve processes for requesting, selecting, and managing projects that support the Safeguards verification mission. This paper will discuss the main USSP processes for accepting and processing Safeguards requests, and managing and reporting task progress.

  14. Semi-Annual Report on Work Supporting the International Forum for Reactor Aging Management (IFRAM)

    SciTech Connect (OSTI)

    Bond, Leonard J.; Brenchley, David L.

    2011-11-30T23:59:59.000Z

    During the first six months of this project, Pacific Northwest National Laboratory has provided planning and leadership support for the establishment of the International Forum for Reactor Aging Management (IFRAM). This entailed facilitating the efforts of the Global Steering Committee to prepare the charter, operating guidelines, and other documents for IFRAM. It also included making plans for the Inaugural meeting and facilitating its success. This meeting was held on August 4 5, 2011, in Colorado Springs, Colorado. Representatives from Asia, Europe, and the United States met to share information on reactor aging management and to make plans for the future. Professor Tetsuo Shoji was elected chairperson of the Leadership Council. This kick-off event transformed the dream of an international forum into a reality. On August 4-5, 2011, IFRAM began to achieve its mission. The work completed successfully during this period was built upon important previous efforts. This included the development of a proposal for establishing IFRAM and engaging experts in Asia and Europe. The proposal was presented at Engagement workshops in Seoul, Korea (October 2009) and Petten, The Netherlands (May 2010). Participants in both groups demonstrated strong interest in the establishment of IFRAM. Therefore, the Global Steering Committee was formed to plan and carry out the start-up of IFRAM in 2011. This report builds on the initial activities and documents the results of activities over the last six months.

  15. Residential Energy Code Technical Support: Training that Works for Enforcement Personnel

    E-Print Network [OSTI]

    Bowman, J.

    1988-01-01T23:59:59.000Z

    Comprehensive enforcement of residential state energy codes depends upon well designed and accessible technical support programs. This paper will explore the challenges of technical program development and delivery, and the solicitation of support...

  16. work

    Broader source: Energy.gov (indexed) [DOE]

    to 9,500 after the first quarter of this year through a reduction in the support service contract. Fund management followed administrative controls that met the expectations...

  17. Perspective technologies for equipment and liquidation of working faces with heavy mechanized supports

    SciTech Connect (OSTI)

    Pavliska, J.; Polak, J. [VSB-Technical Univ., Ostrava (Czech Republic)

    1994-12-31T23:59:59.000Z

    Ostrava-Karvind coal mines (OKD) situated at the south part of the Silesian basin near the boarder with Poland is the biggest Czech basin with underground mining. It produced both coke and energetic coal with maximum output of 24 mil. t in 1980. Since then the output has been dropping down to 14 mil. t from 10 collieries with 39,000 underground workers in 1993. The only mining method is longwall mining with caving or less commonly with packs. Last year 79% of coal was extracted from faces equipped by mechanized supports and shearer loaders or ploughs. The face complex also involves face and gathering chain conveyors, breaker and hydraulic and power supply units with wirings. 1,500--4,000 t of material is necessary to transport to the face, to assemble there, and after its exploitation to move it back to the surface or to the another prepared face. Most of equipment is transported to the face from the surface. The labor requirement for the process is very high and depends mainly on the technical equipment of transport routes. The methods of coal seams exploitation in OKD under geologically sophisticated conditions only very seldom allows preparation of faces with a sufficient length and life. That is why 40% of 70 working faces are in the phase of equipping or liquidation. Those non-productive stages shorten machine available time of very expensive mining complexes and therefore it is desirable to prepare and implement them to ensure the shortest time possible, the lowest labor requirements and the highest output.

  18. This work is partly supported by NSF CNS #1059212. A WEARABLE PIR SENSOR SYSTEM FOR THERMAL SITUATION PERCEPTION

    E-Print Network [OSTI]

    Zhu, Zhigang

    ___________________________ This work is partly supported by NSF CNS #1059212. A WEARABLE PIR impaired people to adapt themselves well to the situation. In this paper, we propose a wearable PIR thermal. Today, PIR sensors have been widely installed in many buildings for human motion detection

  19. * This work is supported by OTKA501 and ESPRIT BRA 6020. Interactive Diagnosis and Testing of Logic Programs

    E-Print Network [OSTI]

    Alexin, Zoltán

    , the concrete input parameters (test case), the output values and the evaluation result of this test frame (yes* This work is supported by OTKA­501 and ESPRIT BRA 6020. Interactive Diagnosis and Testing with the Category Partition Testing Method. This method can be used both in the debugging and in the testing

  20. Abstract--Multimedia groupware systems provide rich support for distributed team work. Yet effective design of these systems is

    E-Print Network [OSTI]

    Greenberg, Saul

    1 Abstract--Multimedia groupware systems provide rich support for distributed team work. Yet evolve design ideas. The problem is that multimedia groupware is hard to prototype because distributed multimedia systems are complex to implement. To solve this problem, we offer the Collabrary, a toolkit

  1. Abstract--Multimedia groupware systems provide rich support for distributed team work. Yet effective design of these

    E-Print Network [OSTI]

    Greenberg, Saul

    Abstract--Multimedia groupware systems provide rich support for distributed team work. Yet evolve design ideas. The problem is that multimedia groupware is hard to prototype because distributed multimedia systems are complex to implement. To solve this problem, we offer the Collabrary, a toolkit

  2. Statement of work for solar thermal power systems and photovoltaic solar-energy systems technical support services

    SciTech Connect (OSTI)

    none,

    1982-01-01T23:59:59.000Z

    Work is broken down in the following areas: solar thermal central receiver systems analysis; advanced solar thermal systems analysis and engineering; thermal power systems support; total energy systems mission analysis; irrigation and small community mission analysis; photovoltaics mission analysis; Solar Thermal Test Facility and Central Receiver Pilot Plant systems engineering. (LEW)

  3. The Long-Term Information Management Trajectory: Working to Support Data, Science and Technology

    E-Print Network [OSTI]

    Baker, Karen S; Karasti, Helena

    2004-01-01T23:59:59.000Z

    and ecological and information sciences. The work ofecological and information sciences, that mediates betweenand networks; and information science with long-term data

  4. This work was supported by the Director, Office of Science, Office...

    Office of Scientific and Technical Information (OSTI)

    Bevalac through 1992. Subsequent experimental and modeling work has led researchers in Germany and Japan to select carbon (Z6) for their clinical trials, as a way of reducing...

  5. Examination of supervisor assessments of employee work-life conflict, supervisor support, and subsequent outcomes

    E-Print Network [OSTI]

    Youngcourt, Satoris Sabrina

    2006-04-12T23:59:59.000Z

    Research in the work-life area has typically concerned individuals' assessments of their own conflict. The current study went beyond this by examining supervisor assessments of employee conflict and how they relate to the ...

  6. Technical work plan for Surface Impoundments Operable Unit engineering support studies

    SciTech Connect (OSTI)

    NONE

    1995-11-01T23:59:59.000Z

    This document provides a comprehensive work plan which, when utilized as a data collection guide for field activities, will provide the necessary information required to complete a report on geotechnical properties of the sediments contained in the Surface Impoundments Operable Unit at Oak Ridge National Laboratory in Oak Ridge, Tennessee. Detailed guidance is provided for the following activities: collection of samples from the impoundments; compressive strength testing of the raw sediments; compressive strength testing of the structurally modified (lime and cement additives) sediments; testing for sediment physical properties and settling rates; testing for sediment dewatering characteristics; testing for radiation activity during the field work; testing for polymer additions that may enhance settling. The work plan additionally provides guidance and examples for the preparation of documents necessary to establish readiness for safe and satisfactory performance of the field activities. An outline for the format requested for a report of these data is also provided.

  7. Description of work for vadose borings in support of 200-UP-2 Unit

    SciTech Connect (OSTI)

    Kelty, G.G.

    1993-08-27T23:59:59.000Z

    This description of work (DOW) details the field activities associated with the vadose zone drilling and soil sampling in the 200-UP-2 Operable Unit (Task 2, 3, and 5) and will serve as a field guide for those performing the work. It will be used in conjunction with the 200-UP-2 RCRA Facility Investigation/Corrective Measures Study (DOE-RL 1993a,[LFI]) and Site Characterization Manual (WHC 1988a). Vadose zone borings are being constructed to characterize the vertical and horizontal extent of contaminants in sediments within and beneath the cribs. The locations for the proposed borings are presented in Figure 1. The contaminants of concern for the project are presented in Table 1.

  8. Resources to Help Cope in Times of Crisis List created by the MIT Work-Life Center to support the MIT community in the wake of recent violent

    E-Print Network [OSTI]

    Reif, Rafael

    Resources to Help Cope in Times of Crisis List created by the MIT Work-Life Center to support the MIT community in the wake of recent violent events, April 2013. MIT RESOURCES Human Resources MIT; daily living. Human Resources Officers provide support and guidance for managers, supervisors

  9. What is family support work? : a case study within the context of one local authority in Scotland

    E-Print Network [OSTI]

    Smith, Mary

    2009-01-01T23:59:59.000Z

    The thesis investigates the development of family support within one local authority in Scotland and shows that it has emerged from a complex interplay of governmental, philosophical, policy and practice change.

  10. This work is supported in part by the National Science Foun-dation, with grants EIA-9971256, CDA-9623632, and CCR-

    E-Print Network [OSTI]

    Wood, David A.

    This work is supported in part by the National Science Foun- dation, with grants EIA-9971256, CDA on the commercially important DSS and OLTP database applications. Today's middle- ware, and in particular application than the market for databases (approximately 8.8 billion dollars in 2000), the large market

  11. Principles Governing the Pursuit of Externally Sponsored Research at BYU Brigham Young University encourages faculty to seek external funding in support of their scholarly work.

    E-Print Network [OSTI]

    Hart, Gus

    imposed no limit to the amount of external research funding that can be accepted. However, the universityPrinciples Governing the Pursuit of Externally Sponsored Research at BYU Brigham Young University encourages faculty to seek external funding in support of their scholarly work. The Board of Trustees has

  12. This work was supported by NIH NCRR Grant No. 5P41RR012553. Abstract--The influence of brain tissue conductivity

    E-Print Network [OSTI]

    Utah, University of

    method (FEM) head models, each model containing a different set of conductivity values for the brain with a baseline set of reported brain conductivity values. II. METHODOLOGY The finite element realistic head modelThis work was supported by NIH NCRR Grant No. 5P41RR012553. Abstract-- The influence of brain

  13. Integrated Program of Experimental Diagnostics at the NNSS: An Integrated, Prioritized Work Plan for Diagnostic Development and Maintenance and Supporting Capability

    SciTech Connect (OSTI)

    NSTec Mission and Projects Division

    2010-09-30T23:59:59.000Z

    This Integrated Program of Experimental Diagnostics at the NNSS is an integrated prioritized work plan for the Nevada National Security Site (NNSS), formerly the Nevada Test Site (NTS), program that is independent of individual National Security Enterprise Laboratories (Labs) requests or specific Subprograms being supported. This prioritized work plan is influenced by national priorities presented in the Predictive Capability Framework (PCF) and other strategy documents (Primary and Secondary Assessment Technologies Plans and the Plutonium Experiments Plan). This document satisfies completion criteria for FY 2010 MRT milestone #3496: Document an integrated, prioritized work plan for diagnostic development, maintenance, and supporting capability. This document is an update of the 3?year NNSS plan written a year ago, September 21, 2009, to define and understand Lab requests for diagnostic implementation. This plan is consistent with Lab interpretations of the PCF, Primary Assessment Technologies, and Plutonium Experiment plans.

  14. Work Supported by D.o.E. Coop. Agreement DE-FC02-99ER54512

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrincetonUsingWhat is abigpresented in theWork & LifeWork

  15. To appear in the 10th Annual ACM Symposium on Parallel Algorithms and Architectures (SPAA), June 28-July 2, 1998, Puerto Vallarta, Mexico This work is supported in part by Wright Laboratory Avionics Directorate, Air Force

    E-Print Network [OSTI]

    Sorin, Daniel J.

    28-July 2, 1998, Puerto Vallarta, Mexico This work is supported in part by Wright Laboratory Avionics that are connected by a general interconnection network. Such hardware Distributed Shared Memory (DSM, [19]) systems

  16. Proceedings of the ACEEE '98 Summer Study on Energy Efficiency in Buildings LBNL41940 This work was supported by the U.S. Environmental Protection Agency, Atmospheric Pollution Prevention Division, and

    E-Print Network [OSTI]

    This work was supported by the U.S. Environmental Protection Agency, Atmospheric Pollution Prevention industry practice, and ongoing work to address these problems. The paper then focuses on the concept and specified, which includes several fragmented steps, such as design, construction, start-up and commissioning

  17. Proceedings of the Right Light 4 Conference, November 19-21, 1997, Copenhagen, Denmark. This work was supported by the U.S. General Services Administration, Pacific Rim Region, the Pacific Gas &

    E-Print Network [OSTI]

    Cyclotron Road Berkeley, California, USA, 94720 Steven Blanc Pacific Gas & Electric Co. Customer Energy, Denmark. This work was supported by the U.S. General Services Administration, Pacific Rim Region, the Pacific Gas & Electric Company, and the Assistant Secretary for Energy Efficiency and Renewable Energy

  18. Environmental support FY 1995 multi-year program plan/fiscal year work plan WBS 1.5.2/7.4.11

    SciTech Connect (OSTI)

    Moore, D.A.

    1994-09-01T23:59:59.000Z

    The multi-Year Program Plan (MYPP) is the programmatic planning baseline document for technical, schedule, and cost data. The MYPP contains data by which all work is managed, performed and controlled. The integrated planning process, defined by RL, is redicted on establishment of detailed data in the MYPP. The MYPP includes detailed information for the data elements including Level II critical path schedules, cost estimate detail, and updated technical data to be done annually. There will be baseline execution year and out year approval with work authorization for execution. The MYPP will concentrate on definition of the scope, schedule, cost and program element level critical path schedules that show the relationship of planned activities. The Fiscal Year Work Plan (FYWP) is prepared for each program to provide the basis for authorizing fiscal year work. The MYPP/FYWP will be structured into three main areas: (1) Program Overview; (2) Program Baselines; (3) Fiscal Year Work Plan.

  19. Validation Work to Support the Idaho National Engineering and Environmental Laboratory Calculational Burnup Methodology Using Shippingport Light Water Breeder Reactor (LWBR) Spent Fuel Assay Data

    SciTech Connect (OSTI)

    J. W. Sterbentz

    1999-08-01T23:59:59.000Z

    Six uranium isotopes and fourteen fission product isotopes were calculated on a mass basis at end-of-life (EOL) conditions for three fuel rods from different Light Water Breeder Reactor (LWBR) measurements. The three fuel rods evaluated here were taken from an LWBR seed module, a standard blanket module, and a reflector (Type IV) module. The calculated results were derived using a depletion methodology previously employed to evaluate many of the radionuclide inventories for spent nuclear fuels at the Idaho National Engineering and Environmental Laboratory. The primary goal of the calculational task was to further support the validation of this particular calculational methodology and its application to diverse reactor types and fuels. Result comparisons between the calculated and measured mass concentrations in the three rods indicate good agreement for the three major uranium isotopes (U-233, U-234, U-235) with differences of less than 20%. For the seed and standard blanket rod, the U-233 and U-234 differences were within 5% of the measured values (these two isotopes alone represent greater than 97% of the EOL total uranium mass). For the major krypton and xenon fission product isotopes, differences of less than 20% and less than 30% were observed, respectively. In general, good agreement was obtained for nearly all the measured isotopes. For these isotopes exhibiting significant differences, possible explanations are discussed in terms of measurement uncertainty, complex transmutations, etc.

  20. QEP WORKING GROUP CHARGES Assessment Working Group

    E-Print Network [OSTI]

    Liu, Paul

    and a framework that details timelines, leadership, resource allocation, and an assessment plan that is clearlyQEP WORKING GROUP CHARGES Assessment Working Group The topic of the QEP should fit should be supported by a thorough understanding of the institutional context and by assessment data

  1. Review: [Untitled] Reviewed Work(s)

    E-Print Network [OSTI]

    Elman, Benjamin

    Review: [Untitled] Reviewed Work(s): Dodonæus in Japan: Translation and the Scientific Mind to leading academic journals and scholarly literature from around the world. The Archive is supported-for-profit organization with a mission to help the scholarly community take advantage of advances in technology. For more

  2. Sustainability Support

    Broader source: Energy.gov [DOE]

    Sustainability Support serves as a corporate technical assistance, coordination, and integration resource to support line organizations in the resolution of sustainability issues and management concerns.

  3. WORKPLACE GUIDES GLOBAL WORKING

    E-Print Network [OSTI]

    Roelleke, Thomas

    of Stonewall good practice publications profiles some of the employers paving the way for gay staff to work do arise. This guide provides clear, practical tips on how gay employees can access internationalWORKPLACE GUIDES GLOBAL WORKING Supporting lesbian, gay and bisexual staff on overseas assignments

  4. Fuel Cell Council Working Group on Aircraft and Aircraft Ground...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Council Working Group on Aircraft and Aircraft Ground Support Fuel Cell Applications Fuel Cell Council Working Group on Aircraft and Aircraft Ground Support Fuel Cell Applications...

  5. SAE Standards Support

    SciTech Connect (OSTI)

    Gowri, Krishnan

    2012-11-01T23:59:59.000Z

    This report summarizes PNNL activities in FY 2012 in support of the following two vehicle communication standards activities: Technical support to SAE, ANSI and NIST technical working groups. PNNL actively contributed to the use case development, harmonization, and evaluation of the SAE standards activities for vehicle to grid communication Tested and validated a set of potential technologies for meeting SAE communication requirements and provided recommendations for technology choices.

  6. Working Paper

    E-Print Network [OSTI]

    2010-07-16T23:59:59.000Z

    Jul 2, 2010 ... Working Paper. Branch and Bound Algorithms for ...... interest when evaluating the performance. First, each derived subproblem means usage...

  7. Respiratory Mechanisms of Support

    E-Print Network [OSTI]

    Kay, Mark A.

    Respiratory Mechanisms of Support Nasal Cannula Hi Flow Nasal Cannula CPAP Continuous positive the respiratory system is working to compensate for a metabolic issue so as to normalize the blood pH. HCO3 - 22 uses PIP Mechanical Ventilation: Volume vs. Pressure: Volume Control Pressure Control Cycle Volume Time

  8. There is a large amount of experimental work dealing with dry granular flows (such as sand, glass beads, small rocks...) supporting the so called (I) rheology [Jop et al.

    E-Print Network [OSTI]

    Lagre, Pierre-Yves

    that the ratio of the tangential to the normal constraints behaves as a Coulomb like friction dependingThere is a large amount of experimental work dealing with dry granular flows (such as sand, glass

  9. WorkPlan: Database for Work Package Production Scheduling Proceedings IGLC '98

    E-Print Network [OSTI]

    Tommelein, Iris D.

    and expressiveness when it comes to supporting production planning and control, that is, supporting those whoWorkPlan: Database for Work Package Production Scheduling Proceedings IGLC '98 WORKPLAN: DATABASE specifically to implement lean production philosophy in construction. KEY WORDS WorkPlan, weekly work plan

  10. Work breakdown structure guide

    SciTech Connect (OSTI)

    Not Available

    1987-02-06T23:59:59.000Z

    Utilization of the work breakdown structure (WBS) technique is an effective aid in managing Department of Energy (DOE) programs and projects. The technique provides a framework for project management by focusing on the products that are being developed or constructed to solve technical problems. It assists both DOE and contractors in fulfilling their management responsibilities. This document provides guidance for use of the WBS technique for product oriented work identification and definition. It is one in a series of policy and guidance documents supporting DOE's project manaagement system.

  11. This work was supported by the U.S. Environmental Protection Agency, Climate Protection Partnerships Division, Office of Air and Radiation, under U.S. Department of Energy Contract No. DE-AC02-05CH11231.

    E-Print Network [OSTI]

    . The analysis shows that for electricity use in buildings, approximately one-third of the BAU consumption can was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents

  12. Working Copy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengtheningWildfires may contribute more to &83 3.3At DOE Working At

  13. Working Copy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengtheningWildfires may contribute more to &83 3.3At DOE Working

  14. Work Plan

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrincetonUsingWhat is abigpresented in theWork & Life

  15. Categorical Exclusion 4565, Waste Management Construction Support

    Broader source: Energy.gov (indexed) [DOE]

    FornI Project Title: Waste Management Construction Support (4565) Program or Program Office: Y -12 Site Office Location: Oak Ridge Tennessee Project Description: This work scope is...

  16. Fermilab at Work | Work Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.New Mexico Feb. 13, 2013 NAME:Job Opportunities JoinWork Resources

  17. Supporting Collaboration through Semantic-based Work and Constraint Solving

    E-Print Network [OSTI]

    Chen-Burger, Y-H; Hui, K-Y; Preece, A.D; Gray, P.M.D; Tate, Austin

    This paper describes our efforts to provide a collaborative problem solving architecture driven by semantic-based workflow orchestration and constraint problem solving. These technologies are based on shared ontologies ...

  18. Working in partnership to provide the best support

    E-Print Network [OSTI]

    Guo, Zaoyang

    welcome enquiries from students with dyslexia, chronic medical or mental health conditions, sensory such a service. Dyslexia Screening and Assessments For students who have dyslexia and require an updated may be linked to undiagnosed dyslexia, we offer a diagnostic screening service which is free of charge

  19. STATEMENT OF WORK (SOW) TEMPLATE FOR ICE SUPPORT CONTRACTOR

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic2 OPAM615_CostNSARDevelopmental AssignmentApril 2,OCTOBER 2-3, 2012STATEICE

  20. STATEMENT OF WORK (SOW) TEMPLATE FOR ICR SUPPORT CONTRACTOR

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic2 OPAM615_CostNSARDevelopmental AssignmentApril 2,OCTOBER 2-3, 2012STATEICEICR

  1. JLab Supports International Linear Collider Cavity Development Work |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12 Investigation PeerNOON 2004 FebruaryTimothyJefferson

  2. Work Packages for Site Support Service at Los Alamos National

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2, 2015Visiting Strong,Women @ Energy:Terri Quinn Women12.1A

  3. Working with SRNL - Our Facilities - Law Enforcement Support Center -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrincetonUsingWhat is abigpresented

  4. Login to Web Strategies Support Center

    E-Print Network [OSTI]

    Chapman, Michael S.

    Login to Web Strategies Support Center 1. Enter your network login in the User- name and Password. The Web Admin team will handle ticket assignments to make sure the right person is working on the issue. B

  5. Reliable Distributed Computing for Decision Support Systems

    E-Print Network [OSTI]

    Bargiela, Andrzej

    Reliable Distributed Computing for Decision Support Systems Taha Osman, Andrzej Bargiela Department of application tasks on the currently avail- able computing nodes. Distributed Systems Reliability Due decision-support systems such as water distribution net- works, involving hundreds or even thousands

  6. CFCC working group meeting: Proceedings

    SciTech Connect (OSTI)

    NONE

    1997-12-31T23:59:59.000Z

    This report is a compilation of the vugraphs presented at this meeting. Presentations covered are: CFCC Working Group; Overview of study on applications for advanced ceramics in industries for the future; Design codes and data bases: The CFCC program and its involvement in ASTM, ISO, ASME, and military handbook 17 activities; CFCC Working Group meeting (McDermott Technology); CFCC Working Group meeting (Textron); CFCC program for DMO materials; Developments in PIP-derived CFCCs; Toughened Silcomp (SiC-Si) composites for gas turbine engine applications; CFCC program for CVI materials; Self-lubricating CFCCs for diesel engine applications; Overview of the CFCC program`s supporting technologies task; Life prediction methodologies for CFCC components; Environmental testing of CFCCs in combustion gas environments; High-temperature particle filtration ORNL/DCC CRADA; HSCT CMC combustor; and Case study -- CFCC shroud for industrial gas turbines.

  7. Going to Work: Understanding Work Schedules

    E-Print Network [OSTI]

    Hoffman, Rosemarie

    2000-07-20T23:59:59.000Z

    have to work: John, Joyce, Jessie and Mary are full- time employees, and Jan is part-time. Each employee is required to report to This is an example of a work schedule that tells you when and what you have to do: It is best to arrive at least 5 to 15... John, Jessie Joyce Mary Wednesday Joyce, Mary John Jan Thursday Jessie, Joyce Jan Mary Friday Jan, Jessie Joyce John Saturday Mary, Joyce John Jessie Please answer the following questions about the work schedule: 1. What week is this work schedule...

  8. NNSA's Summary of Experiments Conducted in Support of Stockpile...

    National Nuclear Security Administration (NNSA)

    Press Releases Video Gallery Photo Gallery Jobs Apply for Our Jobs Our Jobs Working at NNSA Blog Home NNSA Blog NNSA's Summary of Experiments Conducted in Support ... NNSA's...

  9. Reactor vessel support system

    DOE Patents [OSTI]

    Golden, Martin P. (Trafford, PA); Holley, John C. (McKeesport, PA)

    1982-01-01T23:59:59.000Z

    A reactor vessel support system includes a support ring at the reactor top supported through a box ring on a ledge of the reactor containment. The box ring includes an annular space in the center of its cross-section to reduce heat flow and is keyed to the support ledge to transmit seismic forces from the reactor vessel to the containment structure. A coolant channel is provided at the outside circumference of the support ring to supply coolant gas through the keyways to channels between the reactor vessel and support ledge into the containment space.

  10. Asset management solutions To support your agency's mission

    E-Print Network [OSTI]

    readiness and accountability, including work management, inventory management, service management, contract and service management functions. Work management Inventory management Procurement management ServiceAsset management solutions To support your agency's mission IBM Maximo® Asset Management

  11. Consortium Support (Fixed Support) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsNovember 13, 2014 BuildingEnergyEnergyConsortium Support (Fixed Support)

  12. Enabling Services Dyslexia Support

    E-Print Network [OSTI]

    Anderson, Jim

    Enabling Services Dyslexia Support information for students website: www.soton.ac.uk/edusupport/dyslexia, George Thomas Building (37), Highfield Campus #12;2 Contents About Dyslexia Support.........................................................11 National and Local Organisations: .....................................12 #12;3 About Dyslexia

  13. Supported PV module assembly

    DOE Patents [OSTI]

    Mascolo, Gianluigi; Taggart, David F.; Botkin, Jonathan D.; Edgett, Christopher S.

    2013-10-15T23:59:59.000Z

    A supported PV assembly may include a PV module comprising a PV panel and PV module supports including module supports having a support surface supporting the module, a module registration member engaging the PV module to properly position the PV module on the module support, and a mounting element. In some embodiments the PV module registration members engage only the external surfaces of the PV modules at the corners. In some embodiments the assembly includes a wind deflector with ballast secured to a least one of the PV module supports and the wind deflector. An array of the assemblies can be secured to one another at their corners to prevent horizontal separation of the adjacent corners while permitting the PV modules to flex relative to one another so to permit the array of PV modules to follow a contour of the support surface.

  14. Emergency Medical Support

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-08-21T23:59:59.000Z

    This volume defines coordination between emergency planners and emergency medical support. Canceled by DOE G 151.1-4.

  15. Office of Sustainability Support

    Broader source: Energy.gov [DOE]

    The Office of Sustainability Support serves as AUs organizational lead in partnering with the Departments Sustainability Performance Office to support the understanding and implementation of sustainability programs and requirements within the Department, including through supporting development and implementation of DOEs annual Strategic Sustainability Program Plan.

  16. Enabling Services Dyslexia Support

    E-Print Network [OSTI]

    Anderson, Jim

    Enabling Services Dyslexia Support Information for students Support for students with specific learning difficulties such as dyslexia and dyspraxia Email: enable@soton.ac.uk Tel: 023 8059 7726 Student Services Centre Building (37) Highfield Campus #12;2 Contents About Dyslexia Support

  17. Review: [Untitled] Reviewed Work(s)

    E-Print Network [OSTI]

    Elman, Benjamin

    to leading academic journals and scholarly literature from around the world. The Archive is supported-for-profit organization with a mission to help the scholarly community take advantage of advances in technology. For more guide covers five territories, China, Hong Kong, Japan, South Korea, and Taiwan, bringing together

  18. Team work: Construction

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Team work: Construction Management The Division of Engineering Technology in an construction technology area, an associate degree in construction science, or college- level course work equivalent to an associate degree in construction related area

  19. Work with Biological Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Work with Biological Materials Print Planning A complete Experiment Safety Sheet (ESS) is required before work can be done at the ALS. This ESS is either a part of the proposal...

  20. Interagency Sustainability Working Group

    Broader source: Energy.gov [DOE]

    The Interagency Sustainability Working Group (ISWG) is the coordinating body for sustainable buildings in the federal government.

  1. Cryogenic support system

    DOE Patents [OSTI]

    Nicol, Thomas H. (Aurora, IL); Niemann, Ralph C. (Downers Grove, IL); Gonczy, John D. (Oak Lawn, IL)

    1988-01-01T23:59:59.000Z

    A support system is disclosed for restraining large masses at very low or cryogenic temperatures. The support system employs a tie bar that is pivotally connected at opposite ends to an anchoring support member and a sliding support member. The tie bar extends substantially parallel to the longitudinal axis of the cold mass assembly, and comprises a rod that lengthens when cooled and a pair of end attachments that contract when cooled. The rod and end attachments are sized so that when the tie bar is cooled to cryogenic temperature, the net change in tie bar length is approximately zero. Longitudinal force directed against the cold mass assembly is distributed by the tie bar between the anchoring support member and the sliding support member.

  2. Cryogenic support system

    DOE Patents [OSTI]

    Nicol, T.H.; Niemann, R.C.; Gonczy, J.D.

    1988-11-01T23:59:59.000Z

    A support system is disclosed for restraining large masses at very low or cryogenic temperatures. The support system employs a tie bar that is pivotally connected at opposite ends to an anchoring support member and a sliding support member. The tie bar extends substantially parallel to the longitudinal axis of the cold mass assembly, and comprises a rod that lengthens when cooled and a pair of end attachments that contract when cooled. The rod and end attachments are sized so that when the tie bar is cooled to cryogenic temperature, the net change in tie bar length is approximately zero. Longitudinal force directed against the cold mass assembly is distributed by the tie bar between the anchoring support member and the sliding support member. 7 figs.

  3. Crystalline titanate catalyst supports

    DOE Patents [OSTI]

    Anthony, R.G.; Dosch, R.G.

    1993-01-05T23:59:59.000Z

    A series of new crystalline titanates (CT) are shown to have considerable potential as catalyst supports. For Pd supported catalyst, the catalytic activity for pyrene hydrogenation was substantially different depending on the type of CT, and one was substantially more active than Pd on hydrous titanium oxide (HTO). For 1-hexene hydrogenation the activities of the new CTs were approximately the same as for the hydrous metal oxide supports.

  4. Conduction cooled tube supports

    DOE Patents [OSTI]

    Worley, Arthur C. (Mt. Tabor, NJ); Becht, IV, Charles (Morristown, NJ)

    1984-01-01T23:59:59.000Z

    In boilers, process tubes are suspended by means of support studs that are in thermal contact with and attached to the metal roof casing of the boiler and the upper bend portions of the process tubes. The support studs are sufficiently short that when the boiler is in use, the support studs are cooled by conduction of heat to the process tubes and the roof casing thereby maintaining the temperature of the stud so that it does not exceed 1400.degree. F.

  5. FAB Support Page

    E-Print Network [OSTI]

    Functional Analysis Basics (FAB) Seminar Support Page Fall 2014: Meets TBA. Suggestions for FAB ... Hours: by appointment. Back to Carl Cowen's Home Page

  6. Vessel structural support system

    DOE Patents [OSTI]

    Jenko, James X. (N. Versailles, PA); Ott, Howard L. (Kiski Twp., Allegheny County, PA); Wilson, Robert M. (Plum Boro, PA); Wepfer, Robert M. (Murrysville, PA)

    1992-01-01T23:59:59.000Z

    Vessel structural support system for laterally and vertically supporting a vessel, such as a nuclear steam generator having an exterior bottom surface and a side surface thereon. The system includes a bracket connected to the bottom surface. A support column is pivotally connected to the bracket for vertically supporting the steam generator. The system also includes a base pad assembly connected pivotally to the support column for supporting the support column and the steam generator. The base pad assembly, which is capable of being brought to a level position by turning leveling nuts, is anchored to a floor. The system further includes a male key member attached to the side surface of the steam generator and a female stop member attached to an adjacent wall. The male key member and the female stop member coact to laterally support the steam generator. Moreover, the system includes a snubber assembly connected to the side surface of the steam generator and also attached to the adjacent wall for dampening lateral movement of the steam generator. In addition, the system includes a restraining member of "flat" attached to the side surface of the steam generator and a bumper attached to the adjacent wall. The flat and the bumper coact to further laterally support the steam generator.

  7. Enabling Services Dyslexia Support

    E-Print Network [OSTI]

    Molinari, Marc

    Enabling Services Dyslexia Support Information for Students Website: www.soton.ac.uk/edusupport/dyslexia Contact details Telephone: 023 8059 7726 Email: enable@soton.ac.uk #12;2 About Dyslexia Support · We are a team of specialist dyslexia practitioners within the University of Southampton's Enabling Services

  8. Nanostructured catalyst supports

    DOE Patents [OSTI]

    Zhu, Yimin; Goldman, Jay L.; Qian, Baixin; Stefan, Ionel C.

    2012-10-02T23:59:59.000Z

    The present invention relates to SiC nanostructures, including SiC nanopowder, SiC nanowires, and composites of SiC nanopowder and nanowires, which can be used as catalyst supports in membrane electrode assemblies and in fuel cells. The present invention also relates to composite catalyst supports comprising nanopowder and one or more inorganic nanowires for a membrane electrode assembly.

  9. Supporting Document Strategic Plan

    E-Print Network [OSTI]

    Auckland, University of

    1 Supporting Document Strategic Plan 20132020 #12;2 Supporting Document Strategic Plan 2013 more critical to the University's future than was the case in 2005. The purpose of this document are summarised via a SWOT analysis in Appendix 1. This document should therefore be read in conjunction

  10. Steam generator support system

    DOE Patents [OSTI]

    Moldenhauer, J.E.

    1987-08-25T23:59:59.000Z

    A support system for connection to an outer surface of a J-shaped steam generator for use with a nuclear reactor or other liquid metal cooled power source is disclosed. The J-shaped steam generator is mounted with the bent portion at the bottom. An arrangement of elongated rod members provides both horizontal and vertical support for the steam generator. The rod members are interconnected to the steam generator assembly and a support structure in a manner which provides for thermal distortion of the steam generator without the transfer of bending moments to the support structure and in a like manner substantially minimizes forces being transferred between the support structure and the steam generator as a result of seismic disturbances. 4 figs.

  11. Steam generator support system

    DOE Patents [OSTI]

    Moldenhauer, James E. (Simi Valley, CA)

    1987-01-01T23:59:59.000Z

    A support system for connection to an outer surface of a J-shaped steam generator for use with a nuclear reactor or other liquid metal cooled power source. The J-shaped steam generator is mounted with the bent portion at the bottom. An arrangement of elongated rod members provides both horizontal and vertical support for the steam generator. The rod members are interconnected to the steam generator assembly and a support structure in a manner which provides for thermal distortion of the steam generator without the transfer of bending moments to the support structure and in a like manner substantially minimizes forces being transferred between the support structure and the steam generator as a result of seismic disturbances.

  12. MSU AT WORK IN BRAZIL: AN OVERVIEW

    E-Print Network [OSTI]

    MSU AT WORK IN BRAZIL: AN OVERVIEW InternationalStudiesandPrograms Michigan State University. With more than 100 faculty members studying issues related to Brazil, Michigan State University is strategically placed to have a positive impact in Brazil and beyond. MSU is supporting Brazil in its efforts

  13. making healthy prisons work in Canada

    E-Print Network [OSTI]

    Michelson, David G.

    making healthy prisons work in Canada PREMIERE SHOWING OF VIDEO DOCUMENTARY: `Cancer Walks Free panel discussion in support of healthy prisons in Canada. Panelists will discuss why preventive health be implemented in Canada. PANELISTS Ms. Mo Korchinski Film Director, Member of Women in2 Healing Dr. Keith

  14. Designing for Nomadic Work Norman Makoto Su and Gloria Mark

    E-Print Network [OSTI]

    Su, Norman Makoto

    nomadic work practices. Drawing from strategies for survival of pastoralist nomads to guide our design strategy do so for quite good reasons. [Salzman, p. 40] A new type of mobile work practice is emerging support for their work practices. We employed ethnographic interviews and observations to understand

  15. National Poverty Center Working Paper Series July, 2006

    E-Print Network [OSTI]

    Shyy, Wei

    National Poverty Center Working Paper Series #0627 July, 2006 Income Support Policies Poverty Center Working Paper Series index at: http://www.npc.umich.edu/publications/working_papers/ Any(s) and do not necessarily reflect the view of the National Poverty Center or any sponsoring agency. #12

  16. Work Area Policy

    E-Print Network [OSTI]

    2005-04-19T23:59:59.000Z

    POLICY X.X.X. Volume V, Information Technology. Chapter 6, Acceptable Safety Work Locations. Issuing Office: Department of Mathematics. Responsible...

  17. INL @ work: Archaeologist

    SciTech Connect (OSTI)

    Lowrey, Dino

    2008-01-01T23:59:59.000Z

    INL @ work features jobs performed at the lab. For more information about INL careers, visit http://www.facebook.com/idahonationallaboratory.

  18. Job or Work Formulas

    E-Print Network [OSTI]

    Bailey, Charlotte M

    2014-09-16T23:59:59.000Z

    Job or Work Problems. (Needed equations or formulas). Worker's rate = 1 total time alone. Examples: Joe completes a job in 11 hours; his rate is job/hour.

  19. INL @ work: Archaeologist

    ScienceCinema (OSTI)

    Lowrey, Dino

    2013-05-28T23:59:59.000Z

    INL @ work features jobs performed at the lab. For more information about INL careers, visit http://www.facebook.com/idahonationallaboratory.

  20. Greening our working lives: the environmental impacts of changing patterns of paid work in the UK and the Netherlands, and implications for working time policy

    E-Print Network [OSTI]

    Pullinger, Martin Iain

    2012-06-29T23:59:59.000Z

    Paid working patterns are currently regulated by governments around the world for a range of social and economic reasons: to increase labour supply and skills; to provide a strong tax base to support an ageing population; ...

  1. Work Authorization System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-04-20T23:59:59.000Z

    It establishes a work authorization and control process for work performed by designated management and operating (M&O), management and integrating (M&I), environmental restoration management contracts (ERMC) and other contracts determined by the Procurement Executive (hereafter referred to as M&O contractors). Cancels DOE O 5700.7C. Canceled by DOE O 412.1A.

  2. Work Authorization System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-04-21T23:59:59.000Z

    To establish a work authorization and control process for work performed by designated site and facility management contractors, and other contractors as determined by the procurement executive, consistent with the budget execution and program evaluation requirements of the Department of Energy's (DOE's) Planning, Programming, Budgeting, and Evaluation process. Cancels DOE O 412.1.

  3. Work Authorization System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-04-21T23:59:59.000Z

    To establish a work authorization and control process for work performed by designated site and facility management contractors, and other contractors as determined by the procurement executive, consistent with the budget execution and program evaluation requirements of the Department of Energy's Planning, Programming, Budgeting, and Evaluation process. Admin Chg 1, dated 5-21-2014, cancels DOE O 412.1A.

  4. Chromatography resin support

    DOE Patents [OSTI]

    Dobos, James G. (North Augusta, SC)

    2002-01-01T23:59:59.000Z

    An apparatus and method of using an improved chromatography resin support is disclosed. The chromatography support platform is provided by a stainless steel hollow cylinder adapted for being inserted into a chromatography column. An exterior wall of the stainless steel cylinder defines a groove for carrying therein an "O"-ring. The upper surface of the stainless steel column is covered by a fine stainless steel mesh welded to the edges of the stainless steel cylinder. When placed upon a receiving ledge defined within a chromatography column, the "O"-ring provides a fluid tight seal with the inner edge wall of the chromatography cylinder. The stainless steel mesh supports the chromatography matrix and provides a back flushable support which is economical and simple to construct.

  5. Fuel rod support grid

    DOE Patents [OSTI]

    Downs, Robert E. (Monroeville, PA); Schwallie, Ambrose L. (Greensburg, PA)

    1985-01-01T23:59:59.000Z

    A grid for the support of nuclear fuel rods arranged in a triangular array. The grid is formed by concentric rings of strap joined by radially arranged web sections.

  6. Supported inorganic membranes

    DOE Patents [OSTI]

    Sehgal, Rakesh (Albuquerque, NM); Brinker, Charles Jeffrey (Albuquerque, NM)

    1998-01-01T23:59:59.000Z

    Supported inorganic membranes capable of molecular sieving, and methods for their production, are provided. The subject membranes exhibit high flux and high selectivity. The subject membranes are substantially defect free and less than about 100 nm thick. The pores of the subject membranes have an average critical pore radius of less than about 5 .ANG., and have a narrow pore size distribution. The subject membranes are prepared by coating a porous substrate with a polymeric sol, preferably under conditions of low relative pressure of the liquid constituents of the sol. The coated substrate is dried and calcined to produce the subject supported membrane. Also provided are methods of derivatizing the surface of supported inorganic membranes with metal alkoxides. The subject membranes find use in a variety of applications, such as the separation of constituents of gaseous streams, as catalysts and catalyst supports, and the like.

  7. WORK PROGRAMME 2010 COOPERATION

    E-Print Network [OSTI]

    Milano-Bicocca, Università

    ------------------------ 18 Area 6.1.2.3 Methods and decision support tools for environmental health risk analysis and policy.1.1.1 The Earth System and Climate: Functioning and abrupt changes------------------------------- 12 Area 6 -------------------------------------------------------------------- 23 Area 6.2.1.2 Water resources

  8. Clean Energy Works (Oregon)

    Broader source: Energy.gov [DOE]

    Clean Energy Works began in 2009 as a pilot program run by the City of Portland. In 2010, the US department of Energy awarded $20 million to create a statewide nonprofit to expand the program...

  9. How Fusion Energy Works

    Broader source: Energy.gov [DOE]

    Fusion energy is the energy source of the sun and all of the stars. As part of How Energy Works, we'll cover everything from fuel sources to plasma physics and beyond.

  10. Fermilab: Science at Work

    ScienceCinema (OSTI)

    Brendan Casey; Herman White; Craig Hogan; Denton Morris; Mary Convery; Bonnie Fleming; Deborah Harris; Dave Schmitz; Brenna Flaugher; Aron Soha

    2013-02-14T23:59:59.000Z

    Six days. Three frontiers. One amazing lab. From 2010 to 2012, a film crew followed a group of scientists at the Department of Energy's Fermilab and filmed them at work and at home. This 40-minute documentary shows the diversity of the people, research and work at Fermilab. Viewers catch a true behind-the-scenes look of the United States' premier particle physics laboratory while scientists explain why their research is important to them and the world.

  11. Concentric tube support assembly

    SciTech Connect (OSTI)

    Rubio, Mark F.; Glessner, John C.

    2012-09-04T23:59:59.000Z

    An assembly (45) includes a plurality of separate pie-shaped segments (72) forming a disk (70) around a central region (48) for retaining a plurality of tubes (46) in a concentrically spaced apart configuration. Each segment includes a support member (94) radially extending along an upstream face (96) of the segment and a plurality of annularly curved support arms (98) transversely attached to the support member and radially spaced apart from one another away from the central region for receiving respective upstream end portions of the tubes in arc-shaped spaces (100) between the arms. Each segment also includes a radial passageway (102) formed in the support member for receiving a fluid segment portion (106) and a plurality of annular passageways (104) formed in the support arms for receiving respective arm portions (108) of the fluid segment portion from the radial passageway and for conducting the respective arm portions into corresponding annular spaces (47) formed between the tubes retained by the disk.

  12. REBUILD AMERICA PROGRAM SCOPE OF WORK

    SciTech Connect (OSTI)

    Jeffrey Brown; Bruce Exstrum

    2004-12-01T23:59:59.000Z

    This report summarizes the activities carried out by Aspen Systems Corporation in support of the Department of Energy's Rebuild America program during the period from October 9, 1999 to October 31, 2004. These activities were in accordance with the Scope of Work contained in a GSA MOBIS schedule task order issued by the National Energy Technology Laboratory. This report includes descriptions of activities and results in the following areas: deployment/delivery model; program and project results; program representative support activities; technical assistance; web site development and operation; business/strategic partners; and training/workshop activities. The report includes conclusions and recommendations. Five source documents are also provided as appendices.

  13. administrative intersectoral working: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    16. This work was supported by the National Aeronautics and Space-2199 NASACR-1999-209827 ICASE Report No. 99-50 Efficient Symbolic State-space Construction for...

  14. Community Power Works' Success Opens Doors to its Future | Department...

    Broader source: Energy.gov (indexed) [DOE]

    for the next phase of the program with support from the City of Seattle's Office of Sustainability and Environment (OSE) and Clean Energy Works, the Portland, Oregon-based...

  15. High Technology School-to-Work Program at Argonne

    ScienceCinema (OSTI)

    None

    2013-04-19T23:59:59.000Z

    Argonne's High Technology School-to-Work Program for Chicago Public School Students. Supported by the Illinois Department of Commerce and Economic Opportunity, Chicago Public Schools, Argonne National Laboratory and the City of Chicago.

  16. Crank shaft support assembly

    DOE Patents [OSTI]

    Natkin, Robert J. (Canton, MI); Oltmans, Bret (Stacy, MN); Allison, John E. (Ann Arbor, MI); Heater, Thomas J. (Milford, MI); Hines, Joy Adair (Plymouth, MI); Tappen, Grant K. (Washington, MI); Peiskammer, Dietmar (Rochester, MI)

    2007-10-23T23:59:59.000Z

    A crank shaft support assembly for increasing stiffness and reducing thermal mismatch distortion in a crank shaft bore of an engine comprising different materials. A cylinder block comprises a first material and at least two crank journal inserts are insert-molded into respective crank journal regions of the cylinder block and comprise a second material having greater stiffness and a lower thermal coefficient of expansion that the first material. At least two bearing caps are bolted to the respective crank journal inserts and define, along with the crank journal inserts, at least two crank shaft support rings defining a crank shaft bore coaxially aligned with a crank shaft axis. The bearing caps comprise a material having higher stiffness and a lower thermal coefficient of expansion than the first material and are supported on the respective crank journal inserts independently of any direct connection to the cylinder block.

  17. Aerogel-supported filament

    DOE Patents [OSTI]

    Wuest, Craig R. (Danville, CA); Tillotson, Thomas M. (Tracy, CA); Johnson, III, Coleman V. (Dallas, TX)

    1995-01-01T23:59:59.000Z

    The present invention is a thin filament embedded in a low density aerogel for use in radiation detection instruments and incandescent lamps. The aerogel provides a supportive matrix that is thermally and electrically nonconductive, mechanically strong, highly porous, gas-permeable, and transparent to ionizing radiation over short distances. A low density, open-cell aerogel is cast around a fine filament or wire, which allows the wire to be positioned with little or no tension and keeps the wire in place in the event of breakage. The aerogel support reduces the stresses on the wire caused by vibrational, gravitational, electrical, and mechanical forces.

  18. Aerogel-supported filament

    DOE Patents [OSTI]

    Wuest, C.R.; Tillotson, T.M.; Johnson, C.V. III

    1995-05-16T23:59:59.000Z

    The present invention is a thin filament embedded in a low density aerogel for use in radiation detection instruments and incandescent lamps. The aerogel provides a supportive matrix that is thermally and electrically nonconductive, mechanically strong, highly porous, gas-permeable, and transparent to ionizing radiation over short distances. A low density, open-cell aerogel is cast around a fine filament or wire, which allows the wire to be positioned with little or no tension and keeps the wire in place in the event of breakage. The aerogel support reduces the stresses on the wire caused by vibrational, gravitational, electrical, and mechanical forces. 6 Figs.

  19. Working group report: Neutrino physics

    E-Print Network [OSTI]

    2009-01-01T23:59:59.000Z

    Working group report: Neutrino physics Acknowledgements TheWorking group report: Neutrino physics Coordinators: SANDHYAthe report of the neutrino physics working group at WHEPP-X.

  20. NNSA Small Business Week 2012: Cadre5 supports NNSA's Global...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Press Releases Video Gallery Photo Gallery Jobs Apply for Our Jobs Our Jobs Working at NNSA Blog Home NNSA Blog NNSA Small Business Week 2012: Cadre5 supports ... NNSA Small...

  1. administration evidence supporting: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    16. This work was supported by the National Aeronautics and Space-2199 NASACR-1999-209827 ICASE Report No. 99-50 Efficient Symbolic State-space Construction for...

  2. Defense Energy Support Center: Installation Energy Commodity Business Unit

    Broader source: Energy.gov [DOE]

    Presentationgiven at the Spring 2009 Federal Utility Partnership Working Group (FUPWG) meetingdiscusses the Defense Energy Support Center's (DESC's) Installation Energy Commodity Business Unit (CBU) including its intent, commitment, pilot project, lessons learned, and impending barriers.

  3. Enhanced radiological work planning

    SciTech Connect (OSTI)

    DECKER, W.A.

    1999-05-21T23:59:59.000Z

    The purpose of this standard is to provide Project Hanford Management Contractors (PHMC) with guidance for ensuring radiological considerations are adequately addressed throughout the work planning process. Incorporating radiological controls in the planning process is a requirement of the Hanford Site Radiological Control Manual (HSRCM-I), Chapter 3, Part 1. This standard is applicable to all PHMC contractors and subcontractors. The essential elements of this standard will be incorporated into the appropriate site level work control standard upon implementation of the anticipated revision of the PHMC Administration and Procedure System.

  4. Work with Biological Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengtheningWildfires may contribute more to &83 3.3 Table3Work withWork

  5. Working With Berkeley Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrincetonUsingWhat is abigpresented in theWorkBusiness1:Working with

  6. Michigan Collateral Support Program (Michigan)

    Broader source: Energy.gov [DOE]

    The Michigan Collateral Support Program, supported by the Michigan Growth Fund, aims to supply cash collateral accounts to lenders in order to assist borrowers collateral coverage needs. To...

  7. Public Works Transportation Infrastructure Study

    E-Print Network [OSTI]

    Minnesota, University of

    Public Works Transportation Infrastructure Study Minneapolis City of Lakes Minneapolis Public Works Transportation Infrastructure Study #12;Public Works Transportation Infrastructure Study Minneapolis City Works Transportation Infrastructure Study Minneapolis City of Lakes Background: · Currently, funding

  8. WORK PROGRAMME 2009 COOPERATION

    E-Print Network [OSTI]

    Milano-Bicocca, Universit

    _______ 15 SSH-2009 - 4.1.1. Competition and collaboration in access to oil, gas and mineral resourcesWORK PROGRAMME 2009 COOPERATION THEME 8 SOCIO-ECONOMIC SCIENCES AND HUMANITIES (European Commission and the Humanities Page 1 of 38 OBJECTIVE_______________________________________________________________ 3 I CONTEXT

  9. WORK PROGRAMME 2009 COOPERATION

    E-Print Network [OSTI]

    Milano-Bicocca, Universit

    )........................................ 46 Area 2.3.3 Industrial biotechnology: novel high added-value bio-products and bio-processes ..................................................................................................................... 48 Area 2.3.5 Environmental biotechnologyWORK PROGRAMME 2009 COOPERATION THEME 2 FOOD, AGRICULTURE AND FISHERIES, AND BIOTECHNOLOGY

  10. WORK PROGRAMME 2010 COOPERATION

    E-Print Network [OSTI]

    Milano-Bicocca, Universit

    )........................................ 53 Area 2.3.3 Industrial biotechnology: novel high added-value bio-products and bio-processes ..................................................................................................................... 58 Area 2.3.5 Environmental biotechnologyWORK PROGRAMME 2010 COOPERATION THEME 2 FOOD, AGRICULTURE AND FISHERIES, AND BIOTECHNOLOGY

  11. Work Force Discipline

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1983-03-23T23:59:59.000Z

    The order provides guidance and procedures and states responsibilities for maintaining work force discipline in DOE. Chg 1, dated 3-11-85; Chg 2, dated 1-6-86; Chg 3, dated 3-21-89; Chg 4, dated 8-2-90; Chg 5, dated 3-9-92; Chg 6, dated 8-21-92, cancels Chg 5.

  12. The Cognitive Ergonomics of Knowledge-Based Design Support Systems

    E-Print Network [OSTI]

    The Cognitive Ergonomics of Knowledge-Based Design Support Systems Tamara Sumner Knowledge Media, Cognitive Ergonomics, Design, Design Environments, Knowledge-based Systems, Phone-based Interfaces ergonomic; i.e., systems that effectively support designers' cognitive work without hindering their creative

  13. National Poverty Center Working Paper Series September, 2005

    E-Print Network [OSTI]

    Shyy, Wei

    National Poverty Center Working Paper Series #05-17 September, 2005 Child Support and the Economy Maria Cancian Institute for Research on Poverty La Follette School of Public Affairs and School of Social Work University of WisconsinMadison Daniel R. Meyer Institute for Research on Poverty School

  14. Construction work process management

    E-Print Network [OSTI]

    Soares, Jorge Barbosa

    1994-01-01T23:59:59.000Z

    within an organization. TQM started in the 1940s with the application of Statistical Process Control (SPC) to manufacturing (Tenner and De Toro 1992). During World War II, SPC was largely used in the production of weapons. Dr. Joseph Juran describes...: Stuart D. Anderson (Chair of Committee) V&ctor L. Wdlson (Member) Charles H Samson (Member) Ignacio Rodrigue -It rbe (Department Head) Charles D. M ul1 an (Member) August 1994 Major Subject: Civil Engineering ABSTRACT Construction Work...

  15. Catalytic hydrocarbon reactions over supported metals

    SciTech Connect (OSTI)

    Ekerdt, J.G.

    1993-03-29T23:59:59.000Z

    During the past year we have completed our characterization of the factors that control the structure of fully oxidized W and Mo on silica and have established that support hydroxyl groups play a central role in dispersing and attaching cations to the support oxide. Work with M[sub 2](CO)[sub 4]Cp[sub 2](M[sub 2]=MoMo, WW, MoW) system has been very encouraging and continues to support the notion that it may be possible to control the structure of adsorbed catalysts (in this case generate metal dimers) by use of organometallic precursors. Techniques are being developed necessary to employ XPS as a means to characterize the attachment process and the oxidation state of the cations after various thermal and photolytic reduction steps.

  16. River Corridor Cleanup Contract Fiscal Year 2006 Detailed Work Plan: DWP Summary, Volume 1

    SciTech Connect (OSTI)

    Project Integration

    2005-09-26T23:59:59.000Z

    This detailed work plan provides the scope, cost, and schedule for the Fiscal Year 2006 activities required to support River Corridor cleanup objectives within the directed guidance.

  17. ICDF Complex Remedial Action Work Plan

    SciTech Connect (OSTI)

    W. M. Heileson

    2006-12-01T23:59:59.000Z

    This Remedial Action Work Plan provides the framework for operation of the Idaho Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Disposal Facility Complex (ICDF). This facility includes (a) an engineered landfill that meets the substantial requirements of DOE Order 435.1, Resource Conservation and Recovery Act Subtitle C, Idaho Hazardous Waste Management Act, and Toxic Substances Control Act polychlorinated biphenyl landfill requirements; (b) centralized receiving, inspections, administration, storage/staging, and treatment facilities necessary for CERCLA investigation-derived, remedial, and removal waste at the Idaho National Laboratory (INL) prior to final disposition in the disposal facility or shipment off-Site; and (c) an evaporation pond that has been designated as a corrective action management unit. The ICDF Complex, including a buffer zone, will cover approximately 40 acres, with a landfill disposal capacity of approximately 510,000 yd3. The ICDF Complex is designed and authorized to accept INL CERCLA-generated wastes, and includes the necessary subsystems and support facilities to provide a complete waste management system. This Remedial Action Work Plan presents the operational approach and requirements for the various components that are part of the ICDF Complex. Summaries of the remedial action work elements are presented herein, with supporting information and documents provided as appendixes to this work plan that contain specific detail about the operation of the ICDF Complex. This document presents the planned operational process based upon an evaluation of the remedial action requirements set forth in the Operable Unit 3-13 Final Record of Decision.

  18. Cryogenic support member

    DOE Patents [OSTI]

    Niemann, Ralph C. (Downers Grove, IL); Gonczy, John D. (Oak Lawn, IL); Nicol, Thomas H. (Aurora, IL)

    1987-01-01T23:59:59.000Z

    A cryogenic support member is comprised of a non-metallic rod having a depression in at least one end and a metallic end connection assembled to the rod. The metallic end connection comprises a metallic plug which conforms to the shape and is disposed in the depression and a metallic sleeve is disposed over the rod and plug. The plug and the sleeve are shrink-fitted to the depression in the rod to form a connection good in compression, tension and bending.

  19. Supporting Data-Producing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our InstagramStructure ofIndustrialSupporting Data-Producing Facilities and

  20. ORISE: Work Smart Standards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparencyDOENurseResourcesThe Value The U.S. DepartmentWork Smart

  1. Work with Biological Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengtheningWildfires may contribute more to &83 3.3 Table3Work with

  2. Work plan (Nov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrincetonUsingWhat is abigpresented in theWork &ARM STM Cloud

  3. Work with Biological Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrincetonUsingWhat is abigpresented in theWork &ARM STM

  4. Work with Biological Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrincetonUsingWhat is abigpresented in theWork &ARM STMWork with

  5. Working Group Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrincetonUsingWhat is abigpresented in theWorkBusiness1: Model4:

  6. Working Together | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrincetonUsingWhat is abigpresented in theWorkBusiness1:

  7. Radiation effects on reactor pressure vessel supports

    SciTech Connect (OSTI)

    Johnson, R.E. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Engineering Technology; Lipinski, R.E. [Idaho National Engineering Lab., Rockville, MD (United States)

    1996-05-01T23:59:59.000Z

    The purpose of this report is to present the findings from the work done in accordance with the Task Action Plan developed to resolve the Nuclear Regulatory Commission (NRC) Generic Safety Issue No. 15, (GSI-15). GSI-15 was established to evaluate the potential for low-temperature, low-flux-level neutron irradiation to embrittle reactor pressure vessel (RPV) supports to the point of compromising plant safety. An evaluation of surveillance samples from the High Flux Isotope Reactor (HFIR) at the Oak Ridge National Laboratory (ORNL) had suggested that some materials used for RPV supports in pressurized-water reactors could exhibit higher than expected embrittlement rates. However, further tests designed to evaluate the applicability of the HFIR data to reactor RPV supports under operating conditions led to the conclusion that RPV supports could be evaluated using traditional method. It was found that the unique HFIR radiation environment allowed the gamma radiation to contribute significantly to the embrittlement. The shielding provided by the thick steel RPV shell ensures that degradation of RPV supports from gamma irradiation is improbable or minimal. The findings reported herein were used, in part, as the basis for technical resolution of the issue.

  8. Pressurizer tank upper support

    DOE Patents [OSTI]

    Baker, Tod H. (O'Hara Township, Allegheny County, PA); Ott, Howard L. (Kiski Township, Armstrong County, PA)

    1994-01-01T23:59:59.000Z

    A pressurizer tank in a pressurized water nuclear reactor is mounted between structural walls of the reactor on a substructure of the reactor, the tank extending upwardly from the substructure. For bearing lateral loads such as seismic shocks, a girder substantially encircles the pressurizer tank at a space above the substructure and is coupled to the structural walls via opposed sway struts. Each sway strut is attached at one end to the girder and at an opposite end to one of the structural walls, and the sway struts are oriented substantially horizontally in pairs aligned substantially along tangents to the wall of the circular tank. Preferably, eight sway struts attach to the girder at 90.degree. intervals. A compartment encloses the pressurizer tank and forms the structural wall. The sway struts attach to corners of the compartment for maximum stiffness and load bearing capacity. A valve support frame carrying the relief/discharge piping and valves of an automatic depressurization arrangement is fixed to the girder, whereby lateral loads on the relief/discharge piping are coupled directly to the compartment rather than through any portion of the pressurizer tank. Thermal insulation for the valve support frame prevents thermal loading of the piping and valves. The girder is shimmed to define a gap for reducing thermal transfer, and the girder is free to move vertically relative to the compartment walls, for accommodating dimensional variation of the pressurizer tank with changes in temperature and pressure.

  9. Pressurizer tank upper support

    DOE Patents [OSTI]

    Baker, T.H.; Ott, H.L.

    1994-01-11T23:59:59.000Z

    A pressurizer tank in a pressurized water nuclear reactor is mounted between structural walls of the reactor on a substructure of the reactor, the tank extending upwardly from the substructure. For bearing lateral loads such as seismic shocks, a girder substantially encircles the pressurizer tank at a space above the substructure and is coupled to the structural walls via opposed sway struts. Each sway strut is attached at one end to the girder and at an opposite end to one of the structural walls, and the sway struts are oriented substantially horizontally in pairs aligned substantially along tangents to the wall of the circular tank. Preferably, eight sway struts attach to the girder at 90[degree] intervals. A compartment encloses the pressurizer tank and forms the structural wall. The sway struts attach to corners of the compartment for maximum stiffness and load bearing capacity. A valve support frame carrying the relief/discharge piping and valves of an automatic depressurization arrangement is fixed to the girder, whereby lateral loads on the relief/discharge piping are coupled directly to the compartment rather than through any portion of the pressurizer tank. Thermal insulation for the valve support frame prevents thermal loading of the piping and valves. The girder is shimmed to define a gap for reducing thermal transfer, and the girder is free to move vertically relative to the compartment walls, for accommodating dimensional variation of the pressurizer tank with changes in temperature and pressure. 10 figures.

  10. Reactor vessel support system. [LMFBR

    DOE Patents [OSTI]

    Golden, M.P.; Holley, J.C.

    1980-05-09T23:59:59.000Z

    A reactor vessel support system includes a support ring at the reactor top supported through a box ring on a ledge of the reactor containment. The box ring includes an annular space in the center of its cross-section to reduce heat flow and is keyed to the support ledge to transmit seismic forces from the reactor vessel to the containment structure. A coolant channel is provided at the outside circumference of the support ring to supply coolant gas through the keyways to channels between the reactor vessel and support ledge into the containment space.

  11. Portable, space-saving medical patient support system

    DOE Patents [OSTI]

    Bzorgi; Fariborz (Knoxville, TN)

    2011-02-01T23:59:59.000Z

    A support platform having a stowed configuration and a deployed configuration on a floor. The support platform is related to stretcher devices that are used for transporting, confining, or conducting medical procedures on medical patients in medical emergencies. The support platform typically includes a work surface that has a geometric extent. A base that typically includes a plurality of frame members is provided, and the frame members are disposed across the geometric extent of, and proximal to, the work surface in the stowed configuration. The frame members are typically disposed on the floor in the deployed configuration. There is a foldable bracing system engaged with the work surface and engaged with the base. At least a portion of the foldable bracing system is disposed substantially inside at least a portion of the plurality of frame members in the stowed configuration. Further, the foldable bracing system is configured for translocation of the work surface distal from the base in the deployed configuration.

  12. Working Group Report: Sensors

    SciTech Connect (OSTI)

    Artuso, M.; et al.,

    2013-10-18T23:59:59.000Z

    Sensors play a key role in detecting both charged particles and photons for all three frontiers in Particle Physics. The signals from an individual sensor that can be used include ionization deposited, phonons created, or light emitted from excitations of the material. The individual sensors are then typically arrayed for detection of individual particles or groups of particles. Mounting of new, ever higher performance experiments, often depend on advances in sensors in a range of performance characteristics. These performance metrics can include position resolution for passing particles, time resolution on particles impacting the sensor, and overall rate capabilities. In addition the feasible detector area and cost frequently provides a limit to what can be built and therefore is often another area where improvements are important. Finally, radiation tolerance is becoming a requirement in a broad array of devices. We present a status report on a broad category of sensors, including challenges for the future and work in progress to solve those challenges.

  13. How NIF Works

    ScienceCinema (OSTI)

    None

    2010-09-01T23:59:59.000Z

    The National Ignition Facility, located at Lawrence Livermore National Laboratory, is the world's largest laser system... 192 huge laser beams in a massive building, all focused down at the last moment at a 2 millimeter ball containing frozen hydrogen gas. The goal is to achieve fusion... getting more energy out than was used to create it. It's never been done before under controlled conditions, just in nuclear weapons and in stars. We expect to do it within the next 2-3 years. The purpose is threefold: to create an almost limitless supply of safe, carbon-free, proliferation-free electricity; examine new regimes of astrophysics as well as basic science; and study the inner-workings of the U.S. stockpile of nuclear weapons to ensure they remain safe, secure and reliable without the need for underground testing. More information about NIF can be found at:

  14. Compact submanifolds supporting singular interactions

    SciTech Connect (OSTI)

    Kaynak, Burak Tevfik, E-mail: burak.kaynak@boun.edu.tr; Teoman Turgut, O., E-mail: turgutte@boun.edu.tr

    2013-12-15T23:59:59.000Z

    A quantum particle moving under the influence of singular interactions on embedded surfaces furnish an interesting example from the spectral point of view. In these problems, the possible occurrence of a bound-state is perhaps the most important aspect. Such systems can be introduced as quadratic forms and generically they do not require renormalization. Yet an alternative path through the resolvent is also beneficial to study various properties. In the present work, we address these issues for compact surfaces embedded in a class of ambient manifolds. We discover that there is an exact bound state solution written in terms of the heat kernel of the ambient manifold for a range of coupling strengths. Moreover, we develop techniques to estimate bounds on the ground state energy when several surfaces, each of which admits a bound state solution, coexist. -- Highlights: Schrdinger operator with singular interactions supported on compact submanifolds. Exact bound-state solution in terms of the heat kernel of the ambient manifold. Generalization of the variational approach to a collection of submanifolds. Existence of a lower bound for a unique ground state energy.

  15. Support and maneuvering device

    DOE Patents [OSTI]

    Wood, R.L.

    1987-03-23T23:59:59.000Z

    A support and maneuvering device includes an elongated flexible inflatable enclosure having a fixed end and a movable end. The movable end is collapsible toward the fixed end to a contracted position when the enclosure is in a noninflated condition. Upon inflation, the movable end is movable away from the fixed end to an extended position. The movable end includes means for mounting an article such as a solar reflector thereon. The device also includes a plurality of position controlling means disposed about the movable end to effect adjusting movement of portions thereof by predetermined amounts and for controlling an angle at which the article disposed at the movable end is oriented. The plurality of position controlling means limits a suitable number degrees of freedom of the movable end for transmitting a steering motion thereto and for controlling the position thereof. 9 figs.

  16. Support and maneuvering device

    DOE Patents [OSTI]

    Wood, Richard L. (Arvada, CO)

    1988-01-01T23:59:59.000Z

    A support and maneuvering device includes an elongated flexible inflatable enclosure having a fixed end and a movable end. The movable end is collapsible toward the fixed end to a contracted position when the enclosure is in a noninflated condition. Upon inflation, the movable end is movable away from the fixed end to an extended position. The movable end includes means for mounting an article such as a solar reflector thereon. The device also includes a plurality of position controlling means disposed about the movable end to effect adjusting movement of portions thereof by predetermined amounts and for controlling an angle at which the article disposed at the movable end is oriented. The plurality of position controlling means limits a suitable number degrees of freedom of the movable end for transmitting a steering motion thereto and for controlling the position thereof.

  17. Thermionic converter emitter support arrangement

    SciTech Connect (OSTI)

    Allen, Daniel T. (La Jolla, CA)

    1990-01-01T23:59:59.000Z

    A support is provided for use in a therminonic converter to support an end of an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially as its temperature changes. The emitter end (34) is supported by a spring structure (44) that includes a pair of Belleville springs, and the spring structure is supported by a support structure (42) fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element (74) at the front end, a larger metal main support (76) at the rear end that is attached to the housing, and with a ceramic layer (80) between them that is bonded by hot isostatic pressing to the metal element and metal main support. The spring structure can include a loose wafer (120) captured between the Belleville springs.

  18. Thermionic converter emitter support arrangement

    SciTech Connect (OSTI)

    Allen, D.T.

    1990-10-16T23:59:59.000Z

    A support is presented for use in a thermionic converted to support an end of an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially at its temperatures changes. The emitter end is supported by a spring structure that includes a pair of Belleville springs, and the spring structure is supported by a support structure fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element at the front end, a large metal main support at the rear end that is attached to the housing, and metal main support. The spring structure can include a loose wafer captured between the Belleville springs.

  19. Thermionic converter emitter support arrangement

    SciTech Connect (OSTI)

    Allen, Daniel T. (La Jolla, CA)

    1990-01-01T23:59:59.000Z

    A support is provided for use in a thermionic converter to support an end an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially at its temperatures changes. The emitter end (34) is supported by a spring structure (44) that includes a pair of Belleville springs, and the spring structure is supported by a support structure (42) fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element (74) at the front end, a larger metal main support (76) at the rear end that is attached to the housng, and with a ceramic layer (80) between them that is bonded by hot isostatic pressing to the metal element and metal main support. The spring structure can include a loose wafer (120) captured between the Belleville springs.

  20. Thermionic converter emitter support arrangement

    SciTech Connect (OSTI)

    Allen, D.T.

    1989-07-06T23:59:59.000Z

    This document discusses a support provided for use in a thermionic converter to support an end of an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially as its temperature changes. The emitter end is supported by a spring structure that includes a pair of Belleville springs, and the spring structure is supported by a support structure fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element at the front end, a larger metal main support at the rear end that is attached to the housing, and with a ceramic layer between them that is bonded by hot isostatic pressing to the metal element and metal main support. The spring structure can include a loose wafer captured between the Belleville springs. 7 figs.

  1. Thermionic converter emitter support arrangement

    SciTech Connect (OSTI)

    Allen, D.T.

    1990-05-22T23:59:59.000Z

    This patent describes a support provided for use in a therminonic converter to support an end of an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially as its temperature changes. The emitter end is supported by a spring structure that includes a pair of Belleville springs, and the spring structure is supported by a support structure fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element at the front end, a larger metal main support at the rear end that is attached to the housing, and with a ceramic layer between them that is bonded by hot isostatic pressing to the metal element and metal main support. The spring structure can include a loose wafer captured between the Belleville springs.

  2. Process of making supported catalyst

    DOE Patents [OSTI]

    Schwarz, James A. (Fayetteville, NY); Subramanian, Somasundaram (Melvindale, MI)

    1992-01-01T23:59:59.000Z

    Oxide supported metal catalysts have an additional metal present in intimate association with the metal catalyst to enhance catalytic activity. In a preferred mode, iridium or another Group VIII metal catalyst is supported on a titania, alumina, tungsten oxide, silica, or composite oxide support. Aluminum ions are readsorbed onto the support and catalyst, and reduced during calcination. The aluminum can be added as aluminum nitrate to the iridium impregnate solution, e.g. chloroiridic acid.

  3. Work Experience Guidance for Managers

    E-Print Network [OSTI]

    Work Experience Guidance for Managers When approached with a request for work experience, managers. Any queries regarding CRB checks should be directed to your designated HR Manager. When a work any work, paid or unpaid: Before 7am or after 7pm For more than two hours on a school day or Sunday

  4. High Temperature Membrane Working Group

    Broader source: Energy.gov [DOE]

    This presentation provides an overview of the High Temperature Membrane Working Group Meeting in May 2007.

  5. Video Shoot Scope of Work

    Broader source: Energy.gov [DOE]

    Video Shoot Scope of Work, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  6. REVIEWING PERFORMANCE ASSESSMENTS SUPPORTING

    E-Print Network [OSTI]

    Robert J. Lewis

    2010-01-01T23:59:59.000Z

    Purpose: To summarize current NRC policy and guidance, which should assist in making informed decisions regarding land disposal of unique low-level radioactive waste streams, including disposal of significant quantities of depleted uranium until a new regulation is implemented. Background: In September 2009, NRC staff conducted two public workshops soliciting early public input on major issues associated with a potential rulemaking for land disposal of unique waste streams including, but not limited to, significant quantities of depleted uranium. During these workshops, a number of stakeholders expressed interest or concern with the review of performance assessments supporting land disposal of unique waste streams prior to completion of the rulemaking process. Discussion: The enclosure contains a summary of existing guidance for reviewing performance assessments with a focus on issues associated with the safe disposal of unique waste streams. NRC staff is providing this guidance to the Agreement States for their information, and for distribution to their licensees, as appropriate. If you have any questions regarding this correspondence, please contact me at 301-415-3340 or the individuals named below.

  7. Site Support Program Plan Infrastructure Program

    SciTech Connect (OSTI)

    NONE

    1995-09-26T23:59:59.000Z

    The Fiscal Year 1996 Infrastructure Program Site Support Program Plan addresses the mission objectives, workscope, work breakdown structures (WBS), management approach, and resource requirements for the Infrastructure Program. Attached to the plan are appendices that provide more detailed information associated with scope definition. The Hanford Site`s infrastructure has served the Site for nearly 50 years during defense materials production. Now with the challenges of the new environmental cleanup mission, Hanford`s infrastructure must meet current and future mission needs in a constrained budget environment, while complying with more stringent environmental, safety, and health regulations. The infrastructure requires upgrading, streamlining, and enhancement in order to successfully support the site mission of cleaning up the Site, research and development, and economic transition.

  8. ASME Code Efforts Supporting HTGRs

    SciTech Connect (OSTI)

    D.K. Morton

    2011-09-01T23:59:59.000Z

    In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

  9. ASME Code Efforts Supporting HTGRs

    SciTech Connect (OSTI)

    D.K. Morton

    2010-09-01T23:59:59.000Z

    In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

  10. ASME Code Efforts Supporting HTGRs

    SciTech Connect (OSTI)

    D.K. Morton

    2012-09-01T23:59:59.000Z

    In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

  11. Supported liquid membrane electrochemical separators

    DOE Patents [OSTI]

    Pemsler, J. Paul (Lexington, MA); Dempsey, Michael D. (Revere, MA)

    1986-01-01T23:59:59.000Z

    Supported liquid membrane separators improve the flexibility, efficiency and service life of electrochemical cells for a variety of applications. In the field of electrochemical storage, an alkaline secondary battery with improved service life is described in which a supported liquid membrane is interposed between the positive and negative electrodes. The supported liquid membranes of this invention can be used in energy production and storage systems, electrosynthesis systems, and in systems for the electrowinning and electrorefining of metals.

  12. Flexible Work Arrangements Manager Guidelines

    E-Print Network [OSTI]

    Jones, Michelle

    Flexible Work Arrangements Manager Guidelines The Ohio State University Office of Human Resources Page 1 of 2 Flexible Work Arrangement ­ Manager Assessment Issued 07/15/10 When you receive a proposal your manager to review for a decision. Remember that granting a flexible work arrangement may help

  13. Water Resources Working Group Report

    E-Print Network [OSTI]

    Sheridan, Jennifer

    Water Resources Working Group Report This report provided content for the Wisconsin Initiative in February 2011. #12;Water Resources Working Group Wisconsin Initiative on Climate Change Impacts October 2010 #12;Water Resources Working Group Members WICCI Tim Asplund (Co-Chair) - Wisconsin Department

  14. ORISE: Training and Technology Support

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Training and Technology Support ORISE helps train all levels of government personnel for natural disasters and man-made emergencies using latest technology The Oak Ridge Institute...

  15. GENERALIZED SUPPORT SET INVARIANCY SENSITIVITY ...

    E-Print Network [OSTI]

    2005-05-16T23:59:59.000Z

    CQO problems by focusing on the support set of slack variables in dual optimal solutions. ... resources in storage as he had before. Meanwhile, the manager...

  16. Mission | APS Engineering Support Division

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APS Engineering Support Division (AES) Search Button About Welcome Overview Visiting the APS Mission & Goals Find People Organization Charts Committees Job Openings User...

  17. Results from Prior NSF support

    E-Print Network [OSTI]

    2011-09-25T23:59:59.000Z

    So far most of projects in the proposal have been completed or ... the project description of previous NSF support unless otherwise stated. ..... in the end of [

  18. Support of US CLIVAR Project Office 2012

    SciTech Connect (OSTI)

    Cummings, Donna

    2013-11-21T23:59:59.000Z

    SUBJECT: CLOSEOUT OF AWARD NO DE-SC0008494 FINAL REPORT: SUPPORT OF US CLIVAR PROJECT OFFICE 2012 UNIVERSITY CORPORATION FOR ATMOSPHERIC RESEARCH Director of JOSS, supervised the U.S. CLIVAR Project Office Director and helped direct the officer to enhance the goals and objectives of the U.S. CLIVAR Project and budget. Financial Manager of JOSS, worked to complete proposals and monitor compliance with award requirements and funding limitations and ensure the U.S. CLIVAR Project Office complied with UCAR policies and procedures. Project Coordinator administered the funding for the U.S. CLIVAR Project Office and was responsible for coordinating special projects that required additional support from JOSS technical staff. These projects included activities such as website updates, technology upgrades, production of printed reports, and development of graphic elements like logos. Web Developer worked both on web development and graphic work and the work consisted of the following: Maintaining the site ? installing updates to Drupal CMS (Content Management System). Creating new templates for webpages and styling them with CSS and JavaScript/jQuery code. Fixing the styling on webpages that the content contributor/manager (Jenn Mays) created and has had trouble with. Creating new web forms for abstract uploading, subscriptions, and meeting registrations. Created 4 webpages for the ?ASP: Key Uncertainties in the Global Carbon-Cycle? meeting. Developed a document review form, instruction webpages, login redirect, dynamic table with form submissions for the US CLIVAR SSC Science Plan Document Review. This was open to the public from June 12, 2013 until July 10, 2013. During this time the user accounts had to be checked (daily) that were created by the public, to delete any spam ones. Graphics work: preparing images for general use on webpages, webpage banners, and for meeting name badges, creating a US CLIVAR letterhead, redesigning the US AMOC logo. System Administrator spent time working on the migration of the US CLIVAR site from the USGCRP office to UCAR here Boulder. This was done to increase the general speed of the site & to allow the web developer to work in it more efficiently. Main tasks were to Archive the old Site, create new development site for web developer, and move web address to new website when web developer was finished with development. There are no patients or equipment related to this proposals

  19. Thermally stable nanoparticles on supports

    DOE Patents [OSTI]

    Roldan Cuenya, Beatriz; Naitabdi, Ahmed R.; Behafarid, Farzad

    2012-11-13T23:59:59.000Z

    An inverse micelle-based method for forming nanoparticles on supports includes dissolving a polymeric material in a solvent to provide a micelle solution. A nanoparticle source is dissolved in the micelle solution. A plurality of micelles having a nanoparticle in their core and an outer polymeric coating layer are formed in the micelle solution. The micelles are applied to a support. The polymeric coating layer is then removed from the micelles to expose the nanoparticles. A supported catalyst includes a nanocrystalline powder, thin film, or single crystal support. Metal nanoparticles having a median size from 0.5 nm to 25 nm, a size distribution having a standard deviation .ltoreq.0.1 of their median size are on or embedded in the support. The plurality of metal nanoparticles are dispersed and in a periodic arrangement. The metal nanoparticles maintain their periodic arrangement and size distribution following heat treatments of at least 1,000.degree. C.

  20. Defining work from operational principles

    E-Print Network [OSTI]

    R. Gallego; J. Eisert; H. Wilming

    2015-04-20T23:59:59.000Z

    In recent years we have witnessed a concentrated effort to make sense of thermodynamics for small-scale systems. One of the main difficulties is that, at the nano-scale, thermal fluctuations of energy in general render it conceptually difficult to distinguish work from heat. Despite of several attempts to resolve this issue, many of which inspired by quantum information theory, there is still remarkable little consensus on it. In this work, we attempt to define work in a strictly operational way. In our resource-theoretic approach, agents wish to agree upon how much work needs to be invested to effect a transition from one state of an arbitrary quantum work-storage device to another. We introduce basic operational principles, and deduce from them a strict set of mathematical properties that any reasonable function quantifying such work has to fulfil. One of those generalises strong sub-additivity, a key property in quantum information theory, to the domain of thermodynamics. We show that one work quantifier fulfilling all the required properties is the difference of the non-equilibrium free energy of the initial and final state of the work-storage system. More generally, for any work quantifier fulfilling the stated properties, we can derive a quantitative second law in the sense of bounding the work that can be performed using some non-equilibrium resource by the work that is needed to create it. We furthermore discuss the role of path dependence for work quantifiers and the connection to the concept of probability-distributions of work. Our mathematical results can be formulated abstractly and carry over to other resource theories than quantum thermodynamics.

  1. IGENPRO knowledge-based operator support system.

    SciTech Connect (OSTI)

    Morman, J. A.

    1998-07-01T23:59:59.000Z

    Research and development is being performed on the knowledge-based IGENPRO operator support package for plant transient diagnostics and management to provide operator assistance during off-normal plant transient conditions. A generic thermal-hydraulic (T-H) first-principles approach is being implemented using automated reasoning, artificial neural networks and fuzzy logic to produce a generic T-H system-independent/plant-independent package. The IGENPRO package has a modular structure composed of three modules: the transient trend analysis module PROTREN, the process diagnostics module PRODIAG and the process management module PROMANA. Cooperative research and development work has focused on the PRODIAG diagnostic module of the IGENPRO package and the operator training matrix of transients used at the Braidwood Pressurized Water Reactor station. Promising simulator testing results with PRODIAG have been obtained for the Braidwood Chemical and Volume Control System (CVCS), and the Component Cooling Water System. Initial CVCS test results have also been obtained for the PROTREN module. The PROMANA effort also involves the CVCS. Future work will be focused on the long-term, slow and mild degradation transients where diagnoses of incipient T-H component failure prior to forced outage events is required. This will enhance the capability of the IGENPRO system as a predictive maintenance tool for plant staff and operator support.

  2. 4fIELD wORK By Kristen Coyne

    E-Print Network [OSTI]

    Weston, Ken

    related research in all areas of science and engineering. The Magnet Lab is supported by the National the lab's high-performance magnet systems most often engineered and built in-house are cherished#12;4fIELD wORK By Kristen Coyne Magnet research push goes global. In This Issue Volume 2: Issue 1

  3. Technology Support Strategic Plan MISSION STATEMENT

    E-Print Network [OSTI]

    Westfall, Peter H.

    1 Technology Support Strategic Plan MISSION STATEMENT Through collaboration and professionalism, the Technology Support Department provides the highest possible quality Information Technology (IT) services, support, and assistance to the University community. VISION STATEMENT Technology Support

  4. Work For Others (Non-Department of Energy Funded Work)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-01-03T23:59:59.000Z

    Work for Others (WFO) is the performance of work for non-Department of Energy (DOE) entities by DOE/National Nuclear Security Administration (NNSA) and/or their respective contractor personnel or the use of DOE/NNSA facilities that is not directly funded by DOE appropriations. WFO has the following objectives. Cancels DOE O 481.1.

  5. Work For Others (Non-Department of Energy Funded Work)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-09-28T23:59:59.000Z

    Work for Others (WFO) is the performance of work for non-Department of Energy (DOE) entities by DOE/National Nuclear Security Administration (NNSA) and/or their respective contractor personnel or the use of DOE/NNSA facilities that is not directly funded by DOE appropriations. Cancels DOE O 481.1A.

  6. Social Work and Women's Studies Social work engages with individuals,

    E-Print Network [OSTI]

    and Women's Studies can lead to careers in child and youth protection services, women's shelters, sexualSocial Work and Women's Studies Social work engages with individuals, families, communities a positive difference in the lives of others. In your fourth year, you will apply what you have learned

  7. DOE Selects Mission Support Alliance, LLC for Mission Support...

    Office of Environmental Management (EM)

    Hanford Site September 3, 2008 - 3:20pm Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced the Mission Support Alliance, LLC has been selected as the...

  8. Coping with Hot Work Environments

    E-Print Network [OSTI]

    Smith, David

    2005-04-28T23:59:59.000Z

    exposed to these conditions. A hot work environment can impair safety and health. Both workers and their employers are responsi- ble for taking steps to prevent heat stress in the work- place. How Your Body Handles Heat Humans are warm-blooded, which... evaporation. Wiping sweat from the skin with a cloth also prevents cooling from evaporation. In hot, humid conditions, hard work becomes harder. The sweat glands release moisture and essential David W. Smith, Extension Safety Program The Texas A...

  9. FY 1987 current fiscal year work plan

    SciTech Connect (OSTI)

    Not Available

    1986-12-01T23:59:59.000Z

    This Current Year Work Plan presents a detailed description of the activities to be performed by the Joint Integration Office during FY87. It breaks down the activities into two major work areas: Program Management and Program Analysis. Program Management is performed by the JIO by providing technical planning and guidance for the development of advanced TRU waste management capabilities. This includes equipment/facility design, engineering, construction, and operations. These functions are integrated to allow transition from interim storage to final disposition. JIO tasks include program requirements identification, long-range technical planning, budget development, program planning document preparation, task guidance, task monitoring, information gathering and task reporting to DOE, interfacing with other agencies and DOE lead programs, integrating public involvement with program efforts, and preparation of program status reports for DOE. Program Analysis is performed by the JIO to support identification and assessment of alternatives, and development of long-term TRU waste program capabilities. This work plan includes: system analyses, requirements analyses, interim and procedure development, legislative and regulatory analyses, dispatch and traffic analyses, and data bases.

  10. Stage IV work hardening in cubic metals

    SciTech Connect (OSTI)

    Rollett, A.D.; Kocks, U.F.; Doherty, R.D.

    1986-01-01T23:59:59.000Z

    The work hardening of fcc metals at large strains is discussed with reference to the linear stress-strain behavior often observed at large strains and known as Stage IV. The experimental evidence shows that Stage IV is a work hardening phenomenon that is found quite generally, even in pure fcc metals subjected to homogeneous deformation. A simple model for Stage IV in pure metals is presented, based on the accumulation of dislocation debris. Experiments are described for large strain torsion tests on four aluminum alloys. The level and extent of Stage IV scaled with the saturation stress that would represent the end of Stage III in the absence of a Stage IV. Reversing the torsion after large prestrains produced transient reductions in the work hardening. The strain rate sensitivity was also measured before and during the transient and found not to vary significantly. The microstructure observed at large strains in an Mg alloy suggest that Stage IV can occur in the absence of microband formation. Previous proposals for the cause of Stage IV are reviewed and found to be not supported by recent experimental data.

  11. Deployment Support Leading to Implementation

    SciTech Connect (OSTI)

    E. E. Cook

    1997-10-01T23:59:59.000Z

    The following paragraphs summarize the progress of each research project funded under the WVU Cooperative Agreement during the third quarter of 1997 (July - September 1997). The projects are arranged according to their 1997 WVU task number. WVU Focus Area 1.0: Subsurface Contaminants, Containment and Remediation Task No. 1.1: Project discontinued. Task No. 1.2: Development of Standard Test Protocols and Barrier Design Models for Desiccation Barriers (K. Amininan & S. Ameri): A number of experiments were preformed this period to evaluate the ability of the dried sand-packs to act as a barrier to liquids. Water infiltration tests were done with a constant head, dispersing 80 ml of water, and by adding water in small increments. Results indicate that when the water is spilled over the sand-pack, it has the tendency to channel through the sand-pack, significantly reducing the capacity of the dried zone to retain liquid contaminants. This appears to be largely influenced by particle size. As the particle size is reduced, the capillary forces spread the water and prevent/delay channels from forming. The measured permeability values were in agreement with those measured with air. The water retention capacity and capillary rise were largely influenced by time and showed no sensitivity to channeling. The water retention capacity tests suggest the sand-packs can retain more water than the expected. Two sets of water infiltration and drying experiments were designed to evaluate the CAB?s ability to prevent spills from spreading. Ten ml of water was injected every 20 minutes and 80 ml of water was added at one time. When injected slowly, results showed the drying process to be similar to the original drying process. The second set indicted the drying process follows a slowly declining drying with no break through. Results also suggested that air flow through the sand-pack can remove water infiltration. The air flow appeared to prevent any water channeling and thus should cause lateral distribution of the water. The large tank that accommodates the sand bed and the necessary plumbing to simulate various well configurations was received. The monitoring equipment and the sensors are currently being installed. The experimental procedures for Phase II experiments are under further investigation and will be initiated upon installation of CATC and assembly of the monitoring system. Due to insufficient operating funds, the large scale experiments will not be done this year. Task No. 1.3: Technical Support - Development of Standard Test Protocols and Barrier Design Models for In Situ Formed Barriers (B. Overbey & D. Locke, BDM Federal): The Operating Permit Renewal Request for bench scale operations in the FETC B-17 building was submitted to the FETC Lab Safety Committee for approval on 8/14/97. A review of the revised NEPA documents prepared last year indicates that these documents are still applicable for the current work. The initial design and specifications for the CATC vessel were prepared. Construction of the CATC was initiated in early July, the vessel was received August 15, 1997, and on-site work was completed this quarter.

  12. Radiation Safety Work Control Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Radiation Safety Work Control Form (see instructions on pg-3) Rev. May 2014 Area: Form : Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers...

  13. Infrared Thermography (IRT) Working Group

    Broader source: Energy.gov (indexed) [DOE]

    Infrared Thermography (IRT) Working Group Sco McWilliams U.S. Photovoltaic Manufacturing Consor;um (PVMC) Infrared Thermography Infrared Thermography (IRT) has been demonstrated...

  14. Surveillance Guides - Work Control Process

    Broader source: Energy.gov (indexed) [DOE]

    established and is utilized to effectively plan, authorize, and execute the identified work for the facility or activity. Both workers and management demonstrate a commitment to...

  15. INL @ work: Nuclear Reactor Operator

    SciTech Connect (OSTI)

    Russell, Patty

    2008-01-01T23:59:59.000Z

    INL @ work features jobs at the Idaho National Laboratory. Learn more about careers and energy research at INL's facebook site http://www.facebook.com/idahonationallaboratory

  16. Construction Work in Progress (Kansas)

    Broader source: Energy.gov [DOE]

    This Act allows nuclear power plants to qualify for recovery of Construction Work in Progress (CWIP) and other preconstruction expenditures in rates. Previously, nuclear power plants were excluded...

  17. INL @ work: Nuclear Reactor Operator

    ScienceCinema (OSTI)

    Russell, Patty

    2013-05-28T23:59:59.000Z

    INL @ work features jobs at the Idaho National Laboratory. Learn more about careers and energy research at INL's facebook site http://www.facebook.com/idahonationallaboratory

  18. Highly durable graphene nanoplatelets supported Pt nanocatalysts...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    durable graphene nanoplatelets supported Pt nanocatalysts for oxygen reduction . Highly durable graphene nanoplatelets supported Pt nanocatalysts for oxygen reduction . Abstract:...

  19. With the support of FER Genve With the support

    E-Print Network [OSTI]

    Halazonetis, Thanos

    of, and demands for, social-media-like applications enabling better collaborative working in globally distributed research teams in a plastics business, better

  20. (STEM) fields and supports Raytheon's efforts to create an

    E-Print Network [OSTI]

    Lee, Dongwon

    (STEM) fields and supports Raytheon's efforts to create an inclusive work force. "Raytheon to these disciplines," said Mike Keebaugh '67 Math '71g, Comp Sci, president for Raytheon's Intelligence Equity, particularly of our students. Office of the Vice Provost for Educational Equity The Raytheon

  1. FY 1994 Annual Work Plan

    SciTech Connect (OSTI)

    Not Available

    1993-10-01T23:59:59.000Z

    This is the third Office of Inspector General (OIG)Annual Work Plan. Its purpose is to summarize work completed in Fiscal Year (FY) 1993, identify ongoing projects from previous fiscal years which the OIG intends to continue into FY 1994, and announce planned projects which the OIG intends to begin in FY 19994.

  2. Working With Radiation For Research

    E-Print Network [OSTI]

    Jia, Songtao

    working with radiation The radiation badge is not a protective device It cannot shield you from Negative Exponential Protection From Radiation #12;18 Time Distance Shielding Basic Principles #121 Working With Radiation For Research Thomas Cummings Junior Physicist Environmental Health

  3. Hazardous Working Policy November 2012

    E-Print Network [OSTI]

    Doran, Simon J.

    for: The management of University workers performing hazardous tasks or working in hazardous areas;2 Hazardous Areas: are areas where a University worker may be exposed to risks that are considered greater1 Hazardous Working Policy November 2012 Introduction The University of Surrey acknowledges

  4. Operations and Maintenance Management Support

    Broader source: Energy.gov [DOE]

    Federal operations and maintenance (O&M) programs must gain full support from management to succeed. Management understanding and buying into the program elevates O&M importance and allows...

  5. Collateral Support Program (New Mexico)

    Broader source: Energy.gov [DOE]

    The New Mexico Finance Authority has been approved to administer a $13.2 million Small Business Collateral Support Participation Program. The funds are dedicated to help finance credit worthy...

  6. Municipal Support of Projects (Iowa)

    Broader source: Energy.gov [DOE]

    Municipalities may choose to support projects, such as those which will generate electricity through the use of a renewable energy source, by tax-exempt bond financing; easements for roads, water...

  7. DOE: Support Implementation of EEOICPA

    Broader source: Energy.gov [DOE]

    DOEs primary role in the EEOICPA is to provide records to DOL, NIOSH and DOJ, to support claim processing, dose reconstruction and ultimately claim adjudication. The worker records provided by...

  8. Supported molten-metal catalysts

    DOE Patents [OSTI]

    Datta, Ravindra (Iowa City, IA); Singh, Ajeet (Iowa City, IA); Halasz, Istvan (Iowa City, IA); Serban, Manuela (Iowa City, IA)

    2001-01-01T23:59:59.000Z

    An entirely new class of catalysts called supported molten-metal catalysts, SMMC, which can replace some of the existing precious metal catalysts used in the production of fuels, commodity chemicals, and fine chemicals, as well as in combating pollution. SMMC are based on supporting ultra-thin films or micro-droplets of the relatively low-melting (<600.degree. C.), inexpensive, and abundant metals and semimetals from groups 1, 12, 13, 14, 15 and 16, of the periodic table, or their alloys and intermetallic compounds, on porous refractory supports, much like supported microcrystallites of the traditional solid metal catalysts. It thus provides orders of magnitude higher surface area than is obtainable in conventional reactors containing molten metals in pool form and also avoids corrosion. These have so far been the chief stumbling blocks in the application of molten metal catalysts.

  9. Photocatalytic reactor with flexible supports

    DOE Patents [OSTI]

    Jacoby, W.A.; Blake, D.M.

    1995-09-12T23:59:59.000Z

    Organic pollutants and bioaerosols in a gaseous stream are oxidized by exposure to light (e.g., UV light) in the presence of semiconductor catalyst particles or coatings supported on flexible strips suspended in the gaseous stream. 3 figs.

  10. Radiological Work Planning and Procedures

    E-Print Network [OSTI]

    Kurtz, J E

    2000-01-01T23:59:59.000Z

    Each facility is tasked with maintaining personnel radiation exposure as low as reasonably achievable (ALARA). A continued effort is required to meet this goal by developing and implementing improvements to technical work documents (TWDs) and work performance. A review of selected TWDs from most facilities shows there is a need to incorporate more radiological control requirements into the TWD. The Radioactive Work Permit (RWP) provides a mechanism to place some of the requirements but does not provide all the information needed by the worker as he/she is accomplishing the steps of the TWD. Requiring the engineers, planners and procedure writers to put the radiological control requirements in the work steps would be very easy if all personnel had a strong background in radiological work planning and radiological controls. Unfortunately, many of these personnel do not have the background necessary to include these requirements without assistance by the Radiological Control organization at each facility. In add...

  11. Acknowledgment This material is based upon work supported by the National Science Foundation under

    E-Print Network [OSTI]

    Hall, Sharon J.

    generalized methodology to generate information-rich soft data. This updated soft information is processed of the National Science Foundation (NSF). Temporal Geographic Information System (TGIS) to Forecast Future Water and uncertain data (i.e., soft data) to represent future points. The generation of soft data uses a stochastic

  12. This work was partially supported by ANPCYT Project 11-04460 and UBACYT Project JW10.

    E-Print Network [OSTI]

    Wainer, Gabriel

    level specification language defined to represent city sections as cell spaces. It is focused to analyze

  13. PIECEWISE LINERIZATION OF LOGIC FUNCTIONS* The work was supported by BSF under Grant 2002259

    E-Print Network [OSTI]

    Karpovsky, Mark

    ]. BDDs are a standard part of many CAD systems in logic design, signal processing, and other areas where

  14. AIAA-2000-0057 This work was supported by Sandia National Laboratories under

    E-Print Network [OSTI]

    OF FIBERGLASS MATRIX RESINS FOR INCREASED TOUGHNESS AND ENVIRONMENTAL RESISTANCE IN WIND TURBINE BLADES by John in composite to include a number of matrix resins of potential interest material structures, leading to the breakdown of structural in wind turbine blades. The main considerations in resin integrity in areas

  15. (Experimental development, testing and research work in support of the inertial confinement fusion program)

    SciTech Connect (OSTI)

    Drake, D.J.; Luckhardt, R.; Moyer, S.; Armentrout, C.J.; Downs, R.L.; Moncur, K. (eds.)

    1990-02-28T23:59:59.000Z

    This report discusses: Cryogenic technology; polymer shell fabrication; glass shell fabrication and characterization; coating technology; development of characterization techniques; laser technology; and plasma research and instrumentation.

  16. Acknowledgment This material is based upon work supported by the National Science Foundation under

    E-Print Network [OSTI]

    Hall, Sharon J.

    & Regional Agencies Regional Water Providers Private Water Providers Electricity Providers Agricultural Users for this survey. Federal Entities Indian Tribes State Entities Elected Officials Local Water Departments the institutional capacity of your agency Political impacts & governance Identifying and meeting stakeholder

  17. CSCL2009 MAIN CONFERENCE EVENTS -POSTERS Learning Support through Scaffolding Collaborative Project Work

    E-Print Network [OSTI]

    be understood as a community of prosumers in which members are producing and consuming personally meaningful

  18. WORKPAD: an Adaptive Peer-to-Peer Software Infrastructure for Supporting Collaborative Work of Human

    E-Print Network [OSTI]

    Dustdar, Schahram

    consequences or impacts on life, property and environment. The results of this phase are essential for the next made the development of pervasive com- puting environments an emerging reality. Disaster is a broad a different time lapse like floodings or hazardous incidents in nuclear power plants [8]. It is difficult

  19. Researchers in computing, information science, and many other disciplines are working together to support

    E-Print Network [OSTI]

    Gomes, Carla P.

    threatens our planet and the livelihood of future generations. Our Common Future, a report by the World of natural resources and more generally about balancing environmental, economic, and societal needs. Making, Cornell University. #12;The BRIDGE6 statistics, and related fields pool their talents and knowledge

  20. Using a structured vocabulary to support machine understanding of student work

    E-Print Network [OSTI]

    Maynard, Eryn Doris

    2013-01-01T23:59:59.000Z

    This thesis presents a method for machine interpretation of visual representations, including those that are hand-drawn, created by students solving elementary math problems. This interpretation system extends a pen-based ...

  1. Acknowledgment This material is based upon work supported by the National Science Foundation under

    E-Print Network [OSTI]

    Hall, Sharon J.

    geostatistics is a theoretically sound approach for assimilating the soft data into mapping processes. Our results lead to increased mapping accuracy over classical geostatistics, which does not account statistical moments only; thin sold line) or soft data consisting of first and second order (dotted lines

  2. *Support from EPRI, NSF and ORNL for this work is gratefully acknowledged.

    E-Print Network [OSTI]

    Amin, S. Massoud

    of the power produced, rights of way and assts, but it also creates challenges: 1) Regulatory Challenges be taken into account. #12;0.6 0.7 0.8 0.9 1 1.1 1989 1994 1999 2004 2009 TransmissionCapacity(1989=1) NPCC TRANSMISSIONINVESTMENT(billion1999-$/ -$117 million/year Transmission investment ($) since 1975 Transmission capacity

  3. The effects of work experiences and institutional support on job satisfaction among NCAA coaches

    E-Print Network [OSTI]

    Kim, Jong-Chae

    2005-08-29T23:59:59.000Z

    , Goldfine, & Riemer, 1996), productivity (Sims, Szilagyi, Keller, 1976), customer satisfaction (DeCarlo & Agarwal, 1999), and organizational effectiveness (Chelladurai & Riemer, 1997), to name a few. In general, job satisfaction in sport management.... Among the six independent variables, job variety, job autonomy, and job feedback were measured with an instrument developed by Sims, Szilagyi, and Keller (1976). Previous research (Dodd & Ganster, 1996) has demonstrated the validity...

  4. Fusing exotic nuclei below the barrier This work was supported by the U.S.

    E-Print Network [OSTI]

    de Souza, Romualdo T.

    : At the temperature of the crust, the Coulomb barrier is too high for thermonuclear fusion of carbon ­ another heat;Motivation Fusion reactions in the outer crust result in X-ray bursts and superbursts Problem) Polarization of nuclei fusion enhancement ? Y. Eyal et al., PRC 13, 1527 (1976) Astrophysically relevant

  5. Fuel Cell Council Working Group on Aircraft and Aircraft Ground Support Fuel

    E-Print Network [OSTI]

    Storage Materials Codes & Standards #12;Regulatory Affairs Facilitate international open markets Develop of Experts on the Transport of Dangerous Goods International Civil Aviation Organization International Air;Standardization Successes Members and staff participate in national and international standards efforts: ISO, IEC

  6. Support for Location and Comprehension of User History in Collaborative Work

    E-Print Network [OSTI]

    Kim, Do Hyoung

    2012-02-14T23:59:59.000Z

    the CoActIVE architecture. It consists of five main parts: a history manager, a history interpretation module, visualization components, I/O interfaces, and a database. 5.1 History Manager The history manager is the main part of the history mechanism... is stored in an internal database permanently for future access, and the manager uses I/O interfaces to access the database transparently. The recorded history is provided to the history interpretation module and visualization components for additional...

  7. and DB McReynolds Life support. Working draft awaiting updates ...

    E-Print Network [OSTI]

    Title. Authors. Status. Peripheral separability and cusps of arithmetic hyperbolic orbifolds. D. B. McReynolds. Algebr. and Geom. Topol. 4 (2004), 721-755.

  8. Fuel Cell Council Working Group on Aircraft and Aircraft Ground Support

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport inEnergy0.pdfTechnologies Program (FCTP) (Fact Sheet) |Energy 12Kathy4Fuel

  9. Egypt-ClimateWorks Low Carbon Growth Planning Support | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A PotentialJump to: navigation, search ToolEcoware SpaEdtek

  10. This work was supported by the Director, Office of Science, Office of High Energ

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem Not FoundInformation DOEInformation Summary Big*The EffectiveTitle: Enhanced

  11. STATEMENT OF WORK (SOW) TEMPLATE COMBINED EIR/ICE SUPPORT CONTRACTOR

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic2 OPAM615_CostNSARDevelopmental AssignmentApril 2,OCTOBER 2-3, 2012STATE

  12. Statement of Work-National Environmental Policy Act (NEPA) Support Services

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Site EnvironmentalEnergySafelyVirtual ToolkitDecommissioning Authority |Macondo

  13. Statement of Work (SOW) Template (Combined EIR/ICE Support Contractor) |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our Instagram Secretary900 SpecialNanoparticulateEmissions Targets

  14. Indonesia-ClimateWorks Low Carbon Growth Planning Support | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, search OpenEIHesperia,IDGWPIndiantown, Florida: Energy Resources

  15. Papua New Guinea-ClimateWorks Low Carbon Growth Planning Support | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRoseConcernsCompanyPCN Technology Jump2011) |PanasonicPapalote

  16. China-ClimateWorks Low Carbon Growth Planning Support | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovation inOpenadd:Information ChinaChinaInformation China Eastern

  17. This material is based upon work supported by the U.S. Department of Energy Offi

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron Spin Transition in2, 2003 (Next Release on5,9,9,33,37 Please

  18. Kenya-ClimateWorks Low Carbon Growth Planning Support | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |Jilin Zhongdiantou New EnergyKenosistec Srl Jump

  19. Malaysia-ClimateWorks Low Carbon Growth Planning Support | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |JilinLu an Group Jump to:Macquarie EnergyMahindraReformsInformation

  20. Mexico-ClimateWorks Low Carbon Growth Planning Support | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |JilinLu an GroupInformationMexico Central America(CTI PFAN) |

  1. ClimateWorks-Egypt-Low Carbon Growth Planning Support | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model, clickInformation SmyrnaNewClayClearSpotYork:Trust

  2. Guyana-ClimateWorks Low Carbon Growth Planning Support | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating AGeothermal/ExplorationGoodsGuangzhou,Guizhou

  3. India-ClimateWorks Low Carbon Growth Planning Support | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup | OpenHunan Runhua New EnergyIT PowerImagineWind Power Ltd

  4. Brazil-ClimateWorks Low Carbon Growth Planning Support | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovation in CarbonofBiotinsBoston CollegeBrazil Timber Jump

  5. Ethiopia-ClimateWorks Low Carbon Growth Planning Support | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualPropertyd8c-a9ae-f8521cbb8489 No revision|LLCInsulation

  6. Work for Others (Non-Department of Energy Funded Work)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-01-24T23:59:59.000Z

    Work for Others is the performance of work for non-Department of Energy (DOE) entities by DOE/National Nuclear Security Administration (NNSA) and/or their respective contractor personnel or the use of DOE/NNSA facilities that is not directly funded by DOE appropriations. Cancels DOE O 481.1B. Certified 1-13-11. Admin Chg 1, dated 3-14-11.

  7. Working Group Report: Lattice Field Theory

    SciTech Connect (OSTI)

    Blum, T.; et al.,

    2013-10-22T23:59:59.000Z

    This is the report of the Computing Frontier working group on Lattice Field Theory prepared for the proceedings of the 2013 Community Summer Study ("Snowmass"). We present the future computing needs and plans of the U.S. lattice gauge theory community and argue that continued support of the U.S. (and worldwide) lattice-QCD effort is essential to fully capitalize on the enormous investment in the high-energy physics experimental program. We first summarize the dramatic progress of numerical lattice-QCD simulations in the past decade, with some emphasis on calculations carried out under the auspices of the U.S. Lattice-QCD Collaboration, and describe a broad program of lattice-QCD calculations that will be relevant for future experiments at the intensity and energy frontiers. We then present details of the computational hardware and software resources needed to undertake these calculations.

  8. RCRA corrective action: Work plans

    SciTech Connect (OSTI)

    Not Available

    1995-02-01T23:59:59.000Z

    This Information Brief describes the work plans that owners/operators may have to prepare in conjunction with the performance of corrective action for compliance with RCRA guidelines. In general, the more complicated the performance of corrective action appears from the remedial investigation and other analyses, the more likely it is that the regulator will impose work plan requirements. In any case, most owner/operators will prepare work plans in conjunction with the performance of corrective action processes as a matter of best engineering management practices.

  9. Support

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our InstagramStructure ofIndustrial TechnologiesSupplemental3,01535,785 740WIPP

  10. A Design Library of Magnet Support - a Proposal -

    SciTech Connect (OSTI)

    Ruland, Robert E.; /SLAC

    2005-08-16T23:59:59.000Z

    Although the ideal and universal support system has not been invented yet, there are many implementations which fulfill most of alignment's requirements. However, inventing a new support system seems to represent the last design challenge, why would we otherwise witness so many new attempts. Already Plato reminded his scholars that one should learn from the past. Unfortunately, learning from previous designs and implementations doesn't seem to carry much attraction. Or it is that we, the customers, are not doing our job by letting the design engineer know what we would like to see done, what we think works, and what is already there. This contribution is an initiative to create a reference for support systems which exist in our laboratories and we know do work. Such an undertaking will require everybody's active support and feedback. I already have to thank my peers at many laboratories who helped me put together this first draft. Only if a more or less complete library of existing designs can be compiled with easy access to drawings can we then hope that the support system design competition looses its challenge. As alignment tolerances get ever tighter, the interplay of alignment with mechanical engineering becomes ever more important. In fact, accelerator alignment has advanced so far that mechanical uncertainties now exceed observational uncertainties. Of the mechanical issues bearing upon alignment, one of the most crucial is the magnet supports; these must provide both stability and a fineness of motion substantially exceeding the final alignment tolerances. Magnet supports are the interface that allows mechanical mounting of components and their subsequent alignment to a nominal position in three-dimensional space. Supports thus provide two functions: that of a spacer to bring the component close to its ideal position, and that of a fine motion system to enable the surveyor to move the component to its ideal location within the required tolerance. It is essential to understand that Magnets, Supports, and Survey and Alignment are interrelated. Ideally, one person would be responsible for all these functions. In larger projects, beyond the scope of one such manager, the responsible parties must be in regular communication. A magnet designed without supports in mind can be quite impossible to hold onto. A support system that holds the magnets up, but requires a hammer to operate, renders impossible the achievement of tight tolerances. Magnets, Supports, and Survey and Alignment must be designed as a system.

  11. Utility Security & Resiliency: Working Together

    Broader source: Energy.gov [DOE]

    Presentationgiven at the Federal Utility Partnership Working Group (FUPWG) Fall 2008 meetingdiscusses Edison Electric Institute (EEI), including its key security objectives, key activities, cybersecurity activities, and spare transformer equipment program (STEP).

  12. Recovery Act Funds at Work

    Broader source: Energy.gov [DOE]

    Funds from the American Recovery and Reinvestment Act of 2009 (Recovery Act) are being put to work to improve safety, reliability, and service in systems across the country. Here are case studies from a variety of Recovery Act programs.

  13. FY 1994 Annual Work Plan

    SciTech Connect (OSTI)

    Not Available

    1993-09-30T23:59:59.000Z

    In accordance with the Inspector General`s Strategic Planning Policy directive, the Office of Inspector General (OIG) annually updates its Strategic Plan with budgetary and program guidance for the next fiscal year. The program guidance identifies and establishes priorities for OIG coverage of important DOE issues and operations, provides the basis for assigning OIG resources, and is the source for issues covered in Assistant Inspectors General annual work plans. The Office of the Assistant Inspector General for Audits (AIGA) publishes an Annual Work Plan in September of each year. The plan includes the OIG program guidance and shows the commitment of resources necessary to accomplish the assigned work and meet our goals. The program guidance provides the framework within which the AIGA work will be planned and accomplished. Audits included in this plan are designed to help insure that the requirements of our stakeholders have been considered and blended into a well balanced audit program.

  14. CSREES Nutrient Management Working Meeting

    E-Print Network [OSTI]

    planning process Nutrient management training P-Indexes and tools developed Educational materials #12Welcome CSREES Nutrient Management Working Meeting May 4 and 5, 2004 Atlanta, GA #12;University Objectives Information Sharing Among States Nutrient management regulations Nutrient management

  15. Student Support-Radiochemistry Conference

    SciTech Connect (OSTI)

    Wynn Volkert, PhD; Victoria (Nikki) Wenzel-Lamb, MBA

    2009-09-01T23:59:59.000Z

    The objectives of this program were to provide bursaries to assist students and post-doctoral fellows being trained in radiochemistry to actively participate in the 18th International Symposium in Radiopharmaceutical Sciences (ISRS-2009) held in Edmonton, Canada on July 12-19, 2009. The critical shortage of scientists in the U.S. trained radiochemistry and imaging scientists is well documented. Scientific meetings such as ISRS-2009 provide an outstanding opportunity to recruit active researchers and trainees in a venue that can inspire and mentor them to join the next generation of radiochemical scientists. The ISRS-2009 was particularly important in this meeting this objective since it is regarded as the premier international meeting that features investigators from across the globe involved in cutting-edge research to synthesize and characterize radiolabeled biomolecules for molecular imaging in living systems. For example, radiochemistry and radionuclide imaging scientists presented new approaches and technologies for synthesis of novel radiolabeled biomolecules with PET (including, 11C and 18F) and SPECT (including 99mTc and 111In). The radiochemical and radionuclide imaging research presented at the ISRS-2009 are directly related to and supportive of the biomolecular radioisotope, radiochemistry and imaging programs in the DOE, Office of Science (BER). There were a total of fifteen students or post-doctoral fellows from a variety of radiochemistry and radionuclide imaging research and educational institutions from across the country (Table 1). Announcements of the SRS/DOE bursary award program were made on the ISRS-2009 meeting web site (www.ISRS18.com), on the SRS website (www.srsweb.org), and via SRS email blasts (announcement Figure 1). The applications were reviewed and awardees selected by a committee composed of Dr. Ken Krohn, University of Washington, Seattle, WA, Dr. William Eckelman, Bethesda, MD,Dr. Michael Welch, Washington University, St. Louis, MO and Dr. Wynn Volkert, University of Missouri, Columbia, MO. The trainees presented results of their work via either an oral or a poster presentation. Abstracts of their papers presented at the ISRS-2009 meeting were published in the Journal of Labelled Compounds and Radiopharmaceuticals, Volume 52, Supplement 1, 2009 (www.interscience.wiley.com/journal/jier), the official Abstract Book for the ISRS-2009 meeting. A copy of the published abstracts presented by each of the fifteen trainees receiving the SRS/DOE Bursary Award is provided on the following pages. The list of the fifteen trainees receiving the 2009 Bursary awards funded by this DOE grant was published in the July 2010 issue of Nuclear Medicine and Biology (Volume 37(5), July 2010) and in the SRS website with appropriate acknowledgement to the U.S. Department [See Appendix 1 for copies of the 15 student/trainee abstracts].

  16. Supported Molten Metal Membranes for Hydrogen Separation

    SciTech Connect (OSTI)

    Datta, Ravindra; Ma, Yi Hua; Yen, Pei-Shan; Deveau, Nicholas; Fishtik, Ilie; Mardilovich, Ivan

    2013-09-30T23:59:59.000Z

    We describe here our results on the feasibility of a novel dense metal membrane for hydrogen separation: Supported Molten Metal Membrane, or SMMM.1 The goal in this work was to develop these new membranes based on supporting thin films of low-melting, non- precious group metals, e.g., tin (Sn), indium (In), gallium (Ga), or their alloys, to provide a flux and selectivity of hydrogen that rivals the conventional but substantially more expensive palladium (Pd) or Pd alloy membranes, which are susceptible to poisoning by the many species in the coal-derived syngas, and further possess inadequate stability and limited operating temperature range. The novelty of the technology presented numerous challenges during the course of this project, however, mainly in the selection of appropriate supports, and in the fabrication of a stable membrane. While the wetting instability of the SMMM remains an issue, we did develop an adequate understanding of the interaction between molten metal films with porous supports that we were able to find appropriate supports. Thus, our preliminary results indicate that the Ga/SiC SMMM at 550 C has a permeance that is an order of magnitude higher than that of Pd, and exceeds the 2015 DOE target. To make practical SMM membranes, however, further improving the stability of the molten metal membrane is the next goal. For this, it is important to better understand the change in molten metal surface tension and contact angle as a function of temperature and gas-phase composition. A thermodynamic theory was, thus, developed, that is not only able to explain this change in the liquid-gas surface tension, but also the change in the solid-liquid surface tension as well as the contact angle. This fundamental understanding has allowed us to determine design characteristics to maintain stability in the face of changing gas composition. These designs are being developed. For further progress, it is also important to understand the nature of solution and permeation process in these molten metal membranes. For this, a comprehensive microkinetic model was developed for hydrogen permeation in dense metal membranes, and tested against data for Pd membrane over a broad range of temperatures.3 It is planned to obtain theoretical and experimental estimates of the parameters to corroborate the model against mental results for SMMM.

  17. Pressure vessel sliding support unit and system using the sliding support unit

    DOE Patents [OSTI]

    Breach, Michael R.; Keck, David J.; Deaver, Gerald A.

    2013-01-15T23:59:59.000Z

    Provided is a sliding support and a system using the sliding support unit. The sliding support unit may include a fulcrum capture configured to attach to a support flange, a fulcrum support configured to attach to the fulcrum capture, and a baseplate block configured to support the fulcrum support. The system using the sliding support unit may include a pressure vessel, a pedestal bracket, and a plurality of sliding support units.

  18. Supporting biosurveillance via the web

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our InstagramStructure ofIndustrialSupporting Data-ProducingSupporting

  19. Work for Others (Non-Department of Energy Funded Work)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-01-24T23:59:59.000Z

    Work for Others is the performance of work for non-Department of Energy (DOE) entities by DOE/National Nuclear Security Administration (NNSA) and/or their respective contractor personnel or the use of DOE/NNSA facilities that is not directly funded by DOE appropriations. Cancels DOE O 481.1B. Certified 1-13-11. Admin Chg 1, dated 3-14-11, cancels DOE O 481.1C. Admin Chg 2, dated 3-9-15, cancels DOE O 481.1C Admin Chg 1

  20. Radiological Work Planning and Procedure

    SciTech Connect (OSTI)

    KURTZ, J.E.

    2000-01-01T23:59:59.000Z

    Each facility is tasked with maintaining personnel radiation exposure as low as reasonably achievable (ALARA). A continued effort is required to meet this goal by developing and implementing improvements to technical work documents (TWDs) and work performance. A review of selected TWDs from most facilities shows there is a need to incorporate more radiological control requirements into the TWD. The Radioactive Work Permit (RWP) provides a mechanism to place some of the requirements but does not provide all the information needed by the worker as he/she is accomplishing the steps of the TWD. Requiring the engineers, planners and procedure writers to put the radiological control requirements in the work steps would be very easy if all personnel had a strong background in radiological work planning and radiological controls. Unfortunately, many of these personnel do not have the background necessary to include these requirements without assistance by the Radiological Control organization at each facility. In addition, there seems to be confusion as to what should be and what should not be included in the TWD.

  1. Supported organoiridium catalysts for alkane dehydrogenation

    DOE Patents [OSTI]

    Baker, R. Thomas; Sattelberger, Alfred P.; Li, Hongbo

    2013-09-03T23:59:59.000Z

    Solid supported organoiridium catalysts, a process for preparing such solid supported organoiridium catalysts, and the use of such solid supported organoiridium catalysts in dehydrogenation reactions of alkanes is provided. The catalysts can be easily recovered and recycled.

  2. Mounting support for a photovoltaic module

    DOE Patents [OSTI]

    Brandt, Gregory Michael; Barsun, Stephan K.; Coleman, Nathaniel T.; Zhou, Yin

    2013-03-26T23:59:59.000Z

    A mounting support for a photovoltaic module is described. The mounting support includes a foundation having an integrated wire-way ledge portion. A photovoltaic module support mechanism is coupled with the foundation.

  3. Master of Social Work Program School of Social Work

    E-Print Network [OSTI]

    Su, Xiao

    within are intended to guide and facilitate the educational experience of our graduate students, details of Social Work Program Overview 11 Mission and Goals 11 General Organization and Administration Professional and Academic Advising for MSW Students 28 Concerns about the MSW Program 28 General University

  4. Leveraging Biologically-inspired Mobile Agents Supporting Composite Needs of Reliability and Timeliness in Sensor Applications

    E-Print Network [OSTI]

    Suzuki, Jun

    Leveraging Biologically-inspired Mobile Agents Supporting Composite Needs of Reliability energy consumption. Existing work consid- ers reliability, timeliness and energy consumption largely balance the tradeoffs among reliability, timeliness and energy efficiency and outperform an existing

  5. Puerto Rico Aqueduct and Sewer Authority General Consulting Services and Technical Support

    E-Print Network [OSTI]

    Gilbes, Fernando

    Puerto Rico Aqueduct and Sewer Authority General Consulting Services and Technical Support, and environmental engineering courses at various engineering schools in Puerto Rico. His work experience includes of Puerto Rico, PSC. (Managing Engineer) (2005- Present) Management of environmental services including

  6. Syntheses and applications of soluble polyisobutylene (PIB)-supported transition metal catalysts

    E-Print Network [OSTI]

    Tian, Jianhua

    2009-05-15T23:59:59.000Z

    catalysts using liquid/liquid biphasic separations after a homogeneous reaction. Our work has shown that PIB-supported Ni(II) and Co(II) ?-diketonates prepared from commercially available vinyl terminated PIB oligomers possess catalytic activity like...

  7. For Immediate Release --Friday, November 16, 2012 Everest Challenge Supports Schools in Nepal

    E-Print Network [OSTI]

    Morris, Joy

    Supports Schools in Nepal Friday, November 16, 7 p.m. to Saturday, November 17 development in Nepal by funding construction and donating school supplies. "The in Nepal," says Drew Andreachuk, a U of L student who has worked first

  8. Peg supported thermal insulation panel

    DOE Patents [OSTI]

    Nowobilski, Jeffert J. (Orchard Park, NY); Owens, William J. (Kenmore, NY)

    1985-01-01T23:59:59.000Z

    A thermal insulation panel which is lightweight, load bearing, accommodates thermal stress, and has excellent high temperature insulation capability comprising high performance insulation between thin metal walls supported by high density, high strength glass pegs made in compliance with specified conditions of time, temperature and pressure.

  9. Peg supported thermal insulation panel

    DOE Patents [OSTI]

    Nowobilski, J.J.; Owens, W.J.

    1985-04-30T23:59:59.000Z

    A thermal insulation panel which is lightweight, load bearing, accommodates thermal stress, and has excellent high temperature insulation capability comprises high performance insulation between thin metal walls supported by high density, high strength glass pegs made in compliance with specified conditions of time, temperature and pressure. 2 figs.

  10. Supporting Blind Photography Chandrika Jayant

    E-Print Network [OSTI]

    Bigham, Jeffrey P.

    Supporting Blind Photography Chandrika Jayant , Hanjie Ji , Samuel White , and Jeffrey P. Bigham.ji,swhite,jbigham}@cs.rochester.edu ABSTRACT Blind people want to take photographs for the same reasons as others to record important events technology and human-powered services can be used to give blind people feedback on their environment

  11. Management of Support Services Activities

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1991-05-17T23:59:59.000Z

    To provide the policy, procedures, and responsibilities for the management of support services contracts with the Department of Energy (DOE). Cancels DOE O 4200.3B dated 10-3-85. Chg 1 dated 3-26-92. Canceled by DOE O 4200.3D dated 8-31-92.

  12. Smith et al Supporting Information

    E-Print Network [OSTI]

    Jarvis, Erich D.

    Smith et al 1 Supporting Information for Smith et al. 2006, PLoS Computational Biology 2:e161-hyperpallium apicale; HF-hippocampal formation, and M-mesopallium. #12;Smith et al 2 FigureS2,nolinkswerefoundbetweenelectrodesindifferentbirds,andnolinkswerefoundintothesoundstimulusvariable. CombinedAnalysisofAllBirds'ElectrodesPlusSound #12;Smith et al 3 Analysis of Data from Subsections

  13. Building Name Room Support By

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    Building Name Room Technology Classroom? Technology Support By: Phone Number: Contact Name: Agricultural Sciences Building G29 Standard iDC 304-293-2832 n/a Agricultural Sciences Building G31 Standard iDC 304-293-2832 n/a Agricultural Sciences Building G101 Standard iDC 304-293-2832 n/a Agricultural

  14. POLICIES TO SUPPORT COMMUNITY SOLAR

    E-Print Network [OSTI]

    Delaware, University of

    POLICIES TO SUPPORT COMMUNITY SOLAR INITIATIVES: BEST PRACTICES TO ENHANCE NET METERING FINAL and Environmental Policy University of Delaware February 2012 #12;Mailing Address: John Byrne Director Center for Energy and Environmental Policy University of Delaware Newark, DE 19716-7381 Email: jbbyrne

  15. Supporting Information Materials and Methods

    E-Print Network [OSTI]

    Collins, Steven H.

    1 Supporting Information Materials and Methods Description of Energy-Recycling Artificial Foot The energy-recycling artificial foot was comprised of six component groups: the attachment interface, the toe The prosthesis simulator boot weighed 1.30 kg, and the lift shoe weighed 1.42 kg, with each adding approximately

  16. Oscillation-supported Information Processing

    E-Print Network [OSTI]

    Diba, Kamran

    , intrinsic currents of neurons, dendritic Ca2+ spikes, and other voltage-dependent membrane oscillations7 Oscillation-supported Information Processing and Transfer at the Hippocampusected by macroscopic oscillations. In each oscillatory cycle, recruitment of principal neurons is temporally protracted

  17. Policies supporting Heat Pump Technologies

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    Policies supporting Heat Pump Technologies in Canada IEA Heat Pump Workshop London, UK November 13 in the world, with an average of 16,995 kilowatt-hours per annum. #12;Canada's Context for Heat Pumps Impacts avenues: Ground source heat pumps for cold climates (heating and cooling) Reversible air source heat

  18. Mentor Guide Patient and supportive.

    E-Print Network [OSTI]

    Lewis, Robert Michael

    Mentor Guide 2012 Patient and supportive. Anyone can be a mentor. Are you... Respected by others in your field. Respectful of others. Confident. People-oriented. Being a mentor allows you the opportunity to provide you with some level of personal satisfaction. In addition, many mentors report that mentoring has

  19. Matrixed business support comparison study.

    SciTech Connect (OSTI)

    Parsons, Josh D.

    2004-11-01T23:59:59.000Z

    The Matrixed Business Support Comparison Study reviewed the current matrixed Chief Financial Officer (CFO) division staff models at Sandia National Laboratories. There were two primary drivers of this analysis: (1) the increasing number of financial staff matrixed to mission customers and (2) the desire to further understand the matrix process and the opportunities and challenges it creates.

  20. Decision Support and Risk Management

    E-Print Network [OSTI]

    and emergency management officials during the planning, incident management preparedness, and response phasesDecision Support and Risk Management CVMDM: Community Vaccination and Mass Dispensing Model What and the performance of prophylaxis supply logistics and PODs. Decision and Information Sciences Division Decision

  1. Supporting Yale's Engine of Discovery

    E-Print Network [OSTI]

    Supporting Yale's Engine of Discovery #12;#12;"During my years at Yale, I have had over thirty partners in this research. Thomas A. Steitz Sterling Professor of Molecular Biophysics and Biochemistry students are central to Yale's engine of discovery, because they have fresh ideas and are willing to take

  2. Stoller Legacy Management Support VPP

    Office of Environmental Management (EM)

    voltages, sulfuric acid concentration and volume, height of ladder work, height of the sulfuric acid tank, the existence or absence of nonskid surfaces on the top of the tank,...

  3. Long working distance interference microscope

    DOE Patents [OSTI]

    Sinclair, Michael B.; DeBoer, Maarten P.; Smith, Norman F.

    2004-04-13T23:59:59.000Z

    Disclosed is a long working distance interference microscope suitable for three-dimensional imaging and metrology of MEMS devices and test structures on a standard microelectronics probe station. The long working distance of 10-30 mm allows standard probes or probe cards to be used. This enables nanometer-scale 3-D height profiles of MEMS test structures to be acquired across an entire wafer. A well-matched pair of reference/sample objectives is not required, significantly reducing the cost of this microscope, as compared to a Linnik microinterferometer.

  4. Property Manager Discretion in Permanent Supportive Housing

    E-Print Network [OSTI]

    van den Berk-Clark, Carissa J.

    2012-01-01T23:59:59.000Z

    of residents in supportive housing. Community Mental Healthhealth system not to use housing as a tool of coercion.adverse departures from supported housing. Philadelphia, PA:

  5. Interactive visual supports for children with autism

    E-Print Network [OSTI]

    Hayes, Gillian R.; Hirano, Sen; Marcu, Gabriela; Monibi, Mohamad; Nguyen, David H.; Yeganyan, Michael

    2010-01-01T23:59:59.000Z

    010-0294-8 ORIGINAL ARTICLE Interactive visual supports fordesign guidelines for interactive visual supports that wouldvSked, a multi-device interactive visual schedule system.

  6. Heterogeneous Catalysis on Atomically Dispersed Supported Metals...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Catalysis on Atomically Dispersed Supported Metals: CO2 Reduction on Multifunctional Pd Catalysts. Heterogeneous Catalysis on Atomically Dispersed Supported Metals: CO2 Reduction...

  7. Colorado: Energy Modeling Products Support Energy Efficiency...

    Energy Savers [EERE]

    Colorado: Energy Modeling Products Support Energy Efficiency Projects Colorado: Energy Modeling Products Support Energy Efficiency Projects May 1, 2014 - 11:04am Addthis Xcel...

  8. Clean Cities Regional Support & Petroleum Displacement Awards...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Regional Support & Petroleum Displacement Awards Clean Cities Regional Support & Petroleum Displacement Awards 2009 DOE Hydrogen Program and Vehicle Technologies Program Annual...

  9. HEP-FCE Working Group on Libraries and Tools

    E-Print Network [OSTI]

    Anders Borgland; Peter Elmer; Michael Kirby; Simon Patton; Maxim Potekhin; Brett Viren; Brian Yanny

    2015-06-03T23:59:59.000Z

    This is a report from the Libraries and Tools Working Group of the High Energy Physics Forum for Computational Excellence. It presents the vision of the working group for how the HEP software community may organize and be supported in order to more efficiently share and develop common software libraries and tools across the world's diverse set of HEP experiments. It gives prioritized recommendations for achieving this goal and provides a survey of a select number of areas in the current HEP software library and tools landscape. The survey identifies aspects which support this goal and areas with opportunities for improvements. The survey covers event processing software frameworks, software development, data management, workflow and workload management, geometry information management and conditions databases.

  10. HEP-FCE Working Group on Libraries and Tools

    E-Print Network [OSTI]

    Borgland, Anders; Kirby, Michael; Patton, Simon; Potekhin, Maxim; Viren, Brett; Yanny, Brian

    2015-01-01T23:59:59.000Z

    This is a report from the Libraries and Tools Working Group of the High Energy Physics Forum for Computational Excellence. It presents the vision of the working group for how the HEP software community may organize and be supported in order to more efficiently share and develop common software libraries and tools across the world's diverse set of HEP experiments. It gives prioritized recommendations for achieving this goal and provides a survey of a select number of areas in the current HEP software library and tools landscape. The survey identifies aspects which support this goal and areas with opportunities for improvements. The survey covers event processing software frameworks, software development, data management, workflow and workload management, geometry information management and conditions databases.

  11. Submitted EDBT 2002, paper ID: 239 Ecient Complex Query Support for Multiversion XML Documents

    E-Print Network [OSTI]

    Tsotras, Vassilis J.

    recent interest in supporting complex queries on XML data (e.g., regular path expressions, structural, Riverside, CA 92521. tsotras@cs.ucr.edu. This work was partially supported by NSF grants IIS-9907477, EIA and queries on their repositories of multiversion documents. Specialty warehouses and archives that monitor

  12. Compiler and Runtime Support for Shared Memory Parallelization of Data Mining Algorithms

    E-Print Network [OSTI]

    Agrawal, Gagan

    Compiler and Runtime Support for Shared Memory Parallelization of Data Mining Algorithms Xiaogang, Columbus OH 43210¡xgli,jinr,agrawal¢@cis.ohio-state.edu Abstract. Data mining techniques focus on finding support for developing scalable implementa- tions of data mining algorithms. Our work encompasses shared

  13. Arbeidslivets lover Act relating to working environment,

    E-Print Network [OSTI]

    Johansen, Tom Henning

    Arbeidslivets lover Act relating to working environment, working hours and employment protection, etc. (Working Environment Act). as subsequently amended, last by the Act of 14. December 2012 No. 80.notification................................................................... 6 Chapter 3. Working environment measures..................................... 6 Section.3

  14. Federal Utility Partnership Working Group

    Broader source: Energy.gov [DOE]

    The Federal Utility Partnership Working Group (FUPWG) establishes partnerships and facilitates communications among Federal agencies, utilities, and energy service companies. The group develops strategies to implement cost-effective energy efficiency and water conservation projects through utility incentive programs at Federal sites.

  15. Groupware Toolkits for Synchronous Work

    E-Print Network [OSTI]

    Greenberg, Saul

    sessions. A set of groupware programming abstractions allows develop- ers to control the behaviour's work- ing style. We illustrate the many ways these components can be designed by drawing on our own conventional single-user GUI toolkits are available, implementing even the simplest systems can be lengthy

  16. FINAL Announcement International Brainstorming Work-

    E-Print Network [OSTI]

    FINAL Announcement 1st International Brainstorming Work- shop on Waste to Energy in India Organized, though in an energy in-efficient way. Organic MSW is identified as one of the potential sources on food versus fuel intensifies, biomass can provide added income to farmers with- out compromising

  17. WORKING PAPER N 2010 -11

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    WORKING PAPER N 2010 - 11 Taxation of early retirement windows and delaying retirement: the French-5472 halshs-00809758,version1-9Apr2013 #12;Taxation of early retirement windows and delaying retirement increased the mandatory retirement age and simultaneously it set a tax levied on early retirement windows

  18. WORKING PAPER N 2010 -7

    E-Print Network [OSTI]

    Boyer, Edmond

    WORKING PAPER N 2010 - 7 Health and Early Retirement: Evidence from French Data for individuals-5472 halshs-00809723,version1-9Apr2013 #12;1 Health and Early Retirement: Evidence from French Data in the retirement decision. Significant links between professional paths, retirement age and retirement conditions

  19. How Minds Work Brains, Ontologies &

    E-Print Network [OSTI]

    Memphis, University of

    or software agent is a virtual machine implemented on another virtual machine The minds of humans or animals are virtual machines implemented on brains #12;Brains, Ontologies & Virtual Machines 13 Virtual1 How Minds Work Brains, Ontologies & Virtual Machines Stan Franklin Computer Science Division

  20. Inside Michigan Work First Programs

    E-Print Network [OSTI]

    Shyy, Wei

    Inside Michigan Work First Programs April, 2000 Poverty and Social Policy Welfare Michigan Program and Vicki Enright of the Michigan Department of Career Development who provided additional comments. Also Associate Program on Poverty and Social Welfare Policy University of Michigan 540 East Liberty Street, Suite

  1. My PhD Plan Completed Work

    E-Print Network [OSTI]

    Ruina, Andy L.

    Background My PhD Plan Completed Work Planned Work Hierarchical Biped Control A Exam Matthew Kelly August 4, 2014 Matthew Kelly Hierarchical Biped Control 1 / 34 #12;Background My PhD Plan Completed Work Planned Work Table of Contents 1 Background 2 My PhD Plan 3 Completed Work 4 Planned Work Push Hold Free

  2. State Support of Domestic Production

    SciTech Connect (OSTI)

    Amy Wright

    2007-12-30T23:59:59.000Z

    This project was developed in response to a cooperative agreement offering by the U.S. Department of Energy (DOE) and the National Energy Technology Laboratory (NETL) under the State Support of Domestic Production DE-FC26-04NT15456. The Interstate Oil and Gas Compact Commission (IOGCC) performed efforts in support of State programs related to the security, reliability and growth if our nation's domestic production of oil and natural gas. The project objectives were to improve the States ability to monitor the security of oil and gas operations; to maximize the production of domestic oil and natural gas thereby minimizing the threat to national security posed by interruptions in energy imports; to assist States in developing and maintaining high standards of environmental protection; to assist in addressing issues that limit the capacity of the industry; to promote the deployment of the appropriate application of technology for regulatory efficiency; and to inform the public about emerging energy issues.

  3. Deployment support leading to implementation

    SciTech Connect (OSTI)

    NONE

    1999-11-01T23:59:59.000Z

    This quarterly report discusses progress on the following tasks and subtasks: (Task 1)--Field demonstration of prefabricated vertical drains (PVD) technology: Subtask 1.1--Pilot scale demonstration of TCE flushing through PVDs at the DOE/RMI Extrusion Plant; Subtask 1.2--Technical support on surfactants and QA/QC for field operations employing PVDs at the RMI Ashtabula, Ohio, site; Subtask 1.3--Operational support of the PVDs and engineering/design/construction/operations of a wastewater treatment plant for extracted fluids; Subtask 1.4--Installation of PVDs at the RMI Ashtabulah, Ohio, site; and Subtask 1.5--Removal of surfactants and trichloroethylene (TCE) from extracted groundwater at the RMI Ashtabula, Ohio, site; (Task 2)--Watershed economics and overview studies; and (Task 3)--Project management.

  4. Capabilities to Support Thermochemical Hydrogen Production Technology Development

    SciTech Connect (OSTI)

    Daniel M. Ginosar

    2009-05-01T23:59:59.000Z

    This report presents the results of a study to determine if Idaho National Laboratory (INL) has the skilled staff, instrumentation, specialized equipment, and facilities required to take on work in thermochemical research, development, and demonstration currently being performed by the Nuclear Hydrogen Initiative (NHI). This study outlines the beneficial collaborations between INL and other national laboratories, universities, and industries to strengthen INL's thermochemical efforts, which should be developed to achieve the goals of the NHI in the most expeditious, cost effective manner. Taking on this work supports INL's long-term strategy to maintain leadership in thermochemical cycle development. This report suggests a logical path forward to accomplish this transition.

  5. Geotechnical support and topical studies for nuclear waste geologic repositories

    SciTech Connect (OSTI)

    Not Available

    1989-01-01T23:59:59.000Z

    The present report lists the technical reviews and comments made during the fiscal year 1988 and summarizes the technical progress of the topical studies. In the area of technical assistance, there were numerous activities detailed in the next section. These included 24 geotechnical support activities, including reviews of 6 Study Plans (SP) and participation in 6 SP Review Workshops, review of one whole document Site Characterization Plan (SCP) and participation in the Assembled Document SCP Review Workshops by 6 LBL reviewers; the hosting of a DOE program review, the rewriting of the project statement of work, 2 trips to technical and planning meetings; preparation of proposed work statements for two new topics for DOE, and 5 instances of technical assistance to DOE. These activities are described in a Table in the following section entitled Geoscience Technical Support for Nuclear Waste Geologic Repositories.''

  6. Supporting the Development of Resilient Message Passing Applications using Simulation

    SciTech Connect (OSTI)

    Naughton, III, Thomas J [ORNL; Engelmann, Christian [ORNL] [ORNL; Vallee, Geoffroy R [ORNL] [ORNL; Boehm, Swen [ORNL] [ORNL

    2014-01-01T23:59:59.000Z

    An emerging aspect of high-performance computing (HPC) hardware/software co-design is investigating performance under failure. The work in this paper extends the Extreme-scale Simulator (xSim), which was designed for evaluating the performance of message passing interface (MPI) applications on future HPC architectures, with fault-tolerant MPI extensions proposed by the MPI Fault Tolerance Working Group. xSim permits running MPI applications with millions of concurrent MPI ranks, while observing application performance in a simulated extreme-scale system using a lightweight parallel discrete event simulation. The newly added features offer user-level failure mitigation (ULFM) extensions at the simulated MPI layer to support algorithm-based fault tolerance (ABFT). The presented solution permits investigating performance under failure and failure handling of ABFT solutions. The newly enhanced xSim is the very first performance tool that supports ULFM and ABFT.

  7. A project management focused framework for assuring quality work processes

    SciTech Connect (OSTI)

    Gamsby, S.O.; Mize, J.D. [Allied Signal, Inc., Albuquerque, NM (United States). Federal Mfg. and Technologies; Reid, R.A. [New Mexico Univ., Albuquerque, NM (United States)

    1996-10-01T23:59:59.000Z

    Federal Manufacturing & Technologies/New Mexico (FM&T/NM) of AlliedSignal is an organization of approximately 300 associates providing operations support, engineering, and other technical services for DOE, New Mexico`s National Laboratories, etc. Work performed is primarily project-oriented and ranges from executing a major long-term contract for retrofitting and maintaining a large fleet of escort vehicles to creating a single, small, prototype electronic device for measuring radiation in a unique environment. FM&T/NM is functionally organized and operates in a classic matrix format with functional departments providing personnel with technical expertise, necessary physical resources, and administrative support to several project-based groups. Like most matrix-based organizations that provide support to diverse customers, FM&T/NM has encountered problems that occur when a group of project managers is expected to work together in using and scheduling a shared set of limited resources for the good of the organization as a whole. The framework for managing projects that we present focuses on developing, understanding, and managing the relationships between the functional organization structure, the system of work processes, and the management of projects. FM&T/NM retains its functional structure which primarily assigns personnel to work processes. The evolving role of the process leader focuses primarily on designing, managing, and improving the process, and the interactions among the subprocesses. The project manager is responsible for (1) translating customer requirements into product specifications, (2) determining the sequence of activities needed to meet project goals, (3) scheduling the required work processes, (4) monitoring project progress, (5) providing liaison between the customer and process leaders, and (6) having the desired product and/or service delivered to a satisfied customer in a timely manner.

  8. The living workplace : a conscious work environment for a small publishing company

    E-Print Network [OSTI]

    Berg, Richard Carl

    1986-01-01T23:59:59.000Z

    This thesis is about the oneness of working and living, and about the making of workplaces that support and encourage the idea that one's work can be an integral part of one's life. The opening position is that there is a ...

  9. Thermodynamic Properties of Supported Catalysts

    SciTech Connect (OSTI)

    Gorte, Raymond J.

    2014-03-26T23:59:59.000Z

    The goals of this work were to develop Coulometric Titration as a method for characterizing the thermodynamic redox properties of oxides and to apply this technique to the characterization of ceria- and vanadia-based catalysts. The redox properties of ceria and vanadia are a major part of what makes these materials catalytically active but their properties are also dependent on their structure and the presence of other oxides. Quantifying these properties through the measurement of oxidation energetics was the goal of this work.

  10. Hook nozzle arrangement for supporting airfoil vanes

    DOE Patents [OSTI]

    Shaffer, James E. (Maitland, FL); Norton, Paul F. (San Diego, CA)

    1996-01-01T23:59:59.000Z

    A gas turbine engine's nozzle structure includes a nozzle support ring, a plurality of shroud segments, and a plurality of airfoil vanes. The plurality of shroud segments are distributed around the nozzle support ring. Each airfoil vane is connected to a corresponding shroud segment so that the airfoil vanes are also distributed around the nozzle support ring. Each shroud segment has a hook engaging the nozzle support ring so that the shroud segments and corresponding airfoil vanes are supported by the nozzle support ring. The nozzle support ring, the shroud segments, and the airfoil vanes may be ceramic.

  11. Hook nozzle arrangement for supporting airfoil vanes

    DOE Patents [OSTI]

    Shaffer, J.E.; Norton, P.F.

    1996-02-20T23:59:59.000Z

    A gas turbine engine`s nozzle structure includes a nozzle support ring, a plurality of shroud segments, and a plurality of airfoil vanes. The plurality of shroud segments are distributed around the nozzle support ring. Each airfoil vane is connected to a corresponding shroud segment so that the airfoil vanes are also distributed around the nozzle support ring. Each shroud segment has a hook engaging the nozzle support ring so that the shroud segments and corresponding airfoil vanes are supported by the nozzle support ring. The nozzle support ring, the shroud segments, and the airfoil vanes may be ceramic. 8 figs.

  12. EERE-Supported International Activities in Latin America (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-05-01T23:59:59.000Z

    The Office of Energy Efficiency and Renewable Energy (EERE) is involved in a variety of international initiatives, partnerships, and events that promote greater understanding and use of renewable energy (RE) and energy efficiency (EE) worldwide. In support of the Energy and Climate Partnership of the Americas (ECPA), EERE is working with several Latin American countries to advance EE and RE deployment for economic growth, energy security, poverty relief, and disaster recovery goals. This fact sheet highlights those activities.

  13. September 2012, Work Force Retention Work Group Status Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideo »UsageSecretary of Energy Advisory10MEASUREMENTSensors,8, 200810Work Force

  14. Work Force Retention Work Group Charter | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 Russian Nuclear Warheads|ofEvents »SSL BasicsKawtarSue CangeWendeWoodWork Force

  15. LEAF Outreach Team Members Needed! Description: The Office of Sustainability seeks an intern to support

    E-Print Network [OSTI]

    Hill, Wendell T.

    LEAF Outreach Team Members Needed! Description: The Office of Sustainability seeks an intern to support the implementation of the LEAF Outreach Team at the University of Maryland. LEAF is an acronym Outreach Team. You'll be working with a dedicated and knowledgeable team working to effect positive change

  16. Air Risk Information Support Center

    SciTech Connect (OSTI)

    Shoaf, C.R.; Guth, D.J. [Environmental Protection Agency, Washington, DC (United States)

    1990-12-31T23:59:59.000Z

    The Air Risk Information Support Center (Air RISC) was initiated in early 1988 by the US Environmental Protection Agency`s (EPA) Office of Health and Environmental Assessment (OHEA) and the Office of Air Quality Planning and Standards (OAQPS) as a technology transfer effort that would focus on providing information to state and local environmental agencies and to EPA Regional Offices in the areas of health, risk, and exposure assessment for toxic air pollutants. Technical information is fostered and disseminated by Air RISCs three primary activities: (1) a {open_quotes}hotline{close_quotes}, (2) quick turn-around technical assistance projects, and (3) general technical guidance projects. 1 ref., 2 figs.

  17. NREL Research Support Facilities (RSF)

    High Performance Buildings Database

    Golden, CO NREL's Research Support Facilities building (RSF) will be a total of 218,000 sq. feet. It will have two parallel secured employee wings, one of which will be 4 stories and the other 3 stories. A connector building housing most of the public spaces will run perpendicular through both wings. The RSF will provide workspace for 742 employees. The RSF is designed to be a zero energy building through the use of innovative energy efficiency, daylighting, and renewable energy strategies, including photovoltaic solar electric systems to generate electricity.

  18. DNA attachment to support structures

    DOE Patents [OSTI]

    Balhorn, Rodney L. (Livermore, CA); Barry, Christopher H. (Fresno, CA)

    2002-01-01T23:59:59.000Z

    Microscopic beads or other structures are attached to nucleic acids (DNA) using a terminal transferase. The transferase adds labeled dideoxy nucleotide bases to the ends of linear strands of DNA. The labels, such as the antigens digoxigenin and biotin, bind to the antibody compounds or other appropriate complementary ligands, which are bound to the microscopic beads or other support structures. The method does not require the synthesis of a synthetic oligonucleotide probe. The method can be used to tag or label DNA even when the DNA has an unknown sequence, has blunt ends, or is a very large fragment (e.g., >500 kilobase pairs).

  19. Supporting Multiple Workloads, Batch Systems,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our InstagramStructure ofIndustrialSupporting Data-Producing Facilities

  20. ORISE: Operations Support and Planning

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparencyDOENurse Triage Lines Support ORISE contributesMaking a

  1. Supporting a Hawaii Hydrogen Economy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideoStrategic Safety GoalsEnergyCompliance withAugust 16,Supporting

  2. International Technical Working Group Round Robin Tests

    SciTech Connect (OSTI)

    Dudder, Gordon B.; Hanlen, Richard C.; Herbillion, Georges M.

    2003-02-01T23:59:59.000Z

    The goal of nuclear forensics is to develop a preferred approach to support illicit trafficking investigations. This approach must be widely understood and accepted as credible. The principal objectives of the Round Robin Tests are to prioritize forensic techniques and methods, evaluate attribution capabilities, and examine the utility of database. The HEU (Highly Enriched Uranium) Round Robin, and previous Plutonium Round Robin, have made tremendous contributions to fulfilling these goals through a collaborative learning experience that resulted from the outstanding efforts of the nine participating internal laboratories. A prioritized list of techniques and methods has been developed based on this exercise. Current work is focused on the extent to which the techniques and methods can be generalized. The HEU Round Robin demonstrated a rather high level of capability to determine the important characteristics of the materials and processes using analytical methods. When this capability is combined with the appropriate knowledge/database, it results in a significant capability to attribute the source of the materials to a specific process or facility. A number of shortfalls were also identified in the current capabilities including procedures for non-nuclear forensics and the lack of a comprehensive network of data/knowledge bases. The results of the Round Robin will be used to develop guidelines or a ''recommended protocol'' to be made available to the interested authorities and countries to use in real cases.

  3. Tennessee Valley and Eastern Kentucky Wind Working Group

    SciTech Connect (OSTI)

    Katie Stokes

    2012-05-03T23:59:59.000Z

    In December 2009, the Southern Alliance for Clean Energy (SACE), through a partnership with the Appalachian Regional Commission, EKPC, Kentucky's Department for Energy Development and Independence, SACE, Tennessee's Department of Environment and Conservation, and TVA, and through a contract with the Department of Energy, established the Tennessee Valley and Eastern Kentucky Wind Working Group (TVEKWWG). TVEKWWG consists of a strong network of people and organizations. Working together, they provide information to various organizations and stakeholders regarding the responsible development of wind power in the state. Members include representatives from utility interests, state and federal agencies, economic development organizations, non-government organizations, local decision makers, educational institutions, and wind industry representatives. The working group is facilitated by the Southern Alliance for Clean Energy. TVEKWWG supports the Department of Energy by helping educate and inform key stakeholders about wind energy in the state of Tennessee.

  4. Fermilab | Fermilab at Work | Home

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHall A This photophoto Fermilab at Work Main

  5. HEADQUARTERS MEDIATION PROGRAM MEDIATION WORKS!

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaefer To: CongestionDevelopmentHEADQUARTERS MEDIATION PROGRAM MEDIATION WORKS!

  6. Working with SRNL - Technology Partnerships

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengtheningWildfires may contribute more to &83 3.3AtWorking SRNL

  7. Working with SRNL - Technology Partnerships

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengtheningWildfires may contribute more to &83 3.3AtWorking SRNL13/2015

  8. Working with SRNL - Technology Transfer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengtheningWildfires may contribute more to &83 3.3AtWorking

  9. Perma Works | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska: Energy Resources Jump to: navigation, search EquivalentPerma Works

  10. Radiation Safety Work Control Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeedingTechnicalPurchase, Delivery, andSmartRadiationRadiation Safety Work

  11. Chapter 20. Work Breakdown and Coordination

    E-Print Network [OSTI]

    Brookhaven National Laboratory - Experiment 821

    Chapter 20. Work Breakdown and Coordination Revised March 1994 The leadership responsibility to level 4 of the work breakdown is shown below. The work breakdown was done by the ten technical teams. We breakdown for commissioning with beam. -- 404 -- #12; Work Breakdown and Coordination 405 #12; 406 Work

  12. Packaging and Transportation Support at LANL CTMA 2012

    SciTech Connect (OSTI)

    Salazar, Nick [Los Alamos National Laboratory

    2012-06-08T23:59:59.000Z

    Operations Support Packaging and Transportation (OS-PT) supports LANL in various functions. Some highlights of the past year have been with the work relating to environmental remediation, type B packaging, non-DOT compliant transfers, and special permit training. The TA-21 remediation project was part of the ARRA funding that LANL received. The $212 million in funding was used to demolish 24 buildings at TA-21, excavate the lab's oldest waste disposal site, and install 16 groundwater monitoring wells. The project was completed ahead of schedule and under budget. More than 300 tons of metal was recycled and all the soil excavated from MDA-B was replaced with clean fill. OS-PT supported this projected by transporting more than 7 million pounds of waste to TA-54 Area G with an addendum to their TSD. Because of the public access on the transfer route, Los Alamos County restricted the transfer to happen from 2:00 AM to 4:00 AM. OS-PT conducted 8 transfers in support of this project. Some concerns included the contaminated trailers at receipt facilities when transferring filled Super Sacks. Future Super Sacks were over packed into new IP-2 Super Sacks before shipping. OS-PT is also supporting the remediation of TA-54 Area G. LANL has an agreement with the State of New Mexico to remove all TRU waste currently stored above ground from at Area G. OS-PT supports this initiative with transfers of TRU waste under LANL's TSD and support of TRU shipments to WIPP. Another project supported by our organization is gas cylinder/dewar recycling and remediation. We are focusing on reducing risk associated with unneeded gasses at LANL. To minimized excessive ordering, to save money and time, and to minimize hazards OS-PT is supporting a gas recycling program. This program will allow programmatic organization across LANL to share unused/unneeded gasses. Instead of old dewars being disposed of, OS-PT has began identifying these dewars and sending them for refurbishment. To date, this effort has saved LANL $450K and estimated saving for future efforts will be more than $1.5 million. Some Projects that are happening here at LANL are offsite source recovery, weapon component transfers, and isotope science production. There are specific packages that help support these projects for the shipment of related materials. OS-PT provides support to these packages to ensure they are and will be available to continue this support. The Areva 435-B Overpack will help the Offsite Source Recovery Project recover high activity gamma sources from various locations across the globe. The Safety Analysis for Packaging is scheduled for initial completion June of 2012. The DPP-1 package is designed to replace the Model FL, which was designed by Rocky Flats and began service in 1990. LANL has collaborated on package design with LLNL, Pantex, Y-12, and KCP. LANL is supporting LLNL on component fixture development. Testing to 10 CFR 71 is to be completed in the Fall of 2012 and scheduled for NA-174 approval in 2014. The SAFESHIELD package helps supports LANL's Isotope production projects. This package can transfer highly irradiated materials from LANL's accelerator to material processing facilities. LANL worked to renew the SAFESHEILD's Certification for 5 more years.

  13. Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program Implementation

    SciTech Connect (OSTI)

    Liby, Alan L [ORNL; Rogers, Hiram [ORNL

    2013-10-01T23:59:59.000Z

    The goal of this activity was to carry out program implementation and technical projects in support of the ARRA-funded Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program of the DOE Advanced Manufacturing Office (AMO) (formerly the Industrial Technologies Program (ITP)). The work was organized into eight projects in four materials areas: strategic materials, structural materials, energy storage and production materials, and advanced/field/transient processing. Strategic materials included work on titanium, magnesium and carbon fiber. Structural materials included work on alumina forming austentic (AFA) and CF8C-Plus steels. The advanced batteries and production materials projects included work on advanced batteries and photovoltaic devices. Advanced/field/transient processing included work on magnetic field processing. Details of the work in the eight projects are available in the project final reports which have been previously submitted.

  14. Analysis Efforts Supporting NSTX Upgrades

    SciTech Connect (OSTI)

    H.Zhang, P. Titus, P. Rogoff, A.Zolfaghari, D. Mangra, M. Smith

    2010-11-29T23:59:59.000Z

    The National Spherical Torus Experiment (NSTX) is a low aspect ratio, spherical torus (ST) configuration device which is located at Princeton Plasma Physics Laboratory (PPPL) This device is presently being updated to enhance its physics by doubling the TF field to 1 Tesla and increasing the plasma current to 2 Mega-amperes. The upgrades include a replacement of the centerstack and addition of a second neutral beam. The upgrade analyses have two missions. The first is to support design of new components, principally the centerstack, the second is to qualify existing NSTX components for higher loads, which will increase by a factor of four. Cost efficiency was a design goal for new equipment qualification, and reanalysis of the existing components. Showing that older components can sustain the increased loads has been a challenging effort in which designs had to be developed that would limit loading on weaker components, and would minimize the extent of modifications needed. Two areas representing this effort have been chosen to describe in more details: analysis of the current distribution in the new TF inner legs, and, second, analysis of the out-of-plane support of the existing TF outer legs.

  15. LOW TEMPERATURE CATHODE SUPPORTED ELECTROLYTES

    SciTech Connect (OSTI)

    Harlan U. Anderson; Fatih Dogan; Vladimir Petrovsky

    2003-03-31T23:59:59.000Z

    This report represents a summary of the work carried out on this project which started October 1999 and ended March 2003. A list of the publications resulting from the work are contained in Appendix A. The most significant achievements are: (1) Dense nanocrystalline zirconia and ceria films were obtained at temperatures < 400 C. (2) Nanocrystalline films of both ceria and zirconia were characterized. (3) We showed that under anodic conditions 0.5 to 1 micron thick nanocrystalline films of Sc doped zirconia have sufficient electronic conductivity to prevent them from being useful as an electrolyte. (4) We have developed a process by which dense 0.5 to 5 micron thick dense films of either YSZ or ceria can be deposited on sintered porous substrates which serve as either the cathode or anode at temperatures as low as 400 C. (5) The program has provided the research to produce two PhD thesis for students, one is now working in the solid oxide fuel cell field. (6) The results of the research have resulted in 69 papers published, 3 papers submitted or being prepared for publication, 50 oral presentations and 3 patent disclosures.

  16. Reduce Steam Trap Failures at Chambers Works

    E-Print Network [OSTI]

    Kouba, C.

    2010-01-01T23:59:59.000Z

    automatically within SAP ? Survey performed and work orders created ? Surveyor/Team Leader coordinates repair work ? Use backlog of work to justify number of mechanics ? Prioritize work for mechanics ? Repair Mechanics work across the site ? SAP Work Order... history updated for individual traps ? Surveyor updates excel spreadsheet with repair history ? Monthly reports sent to area and site management 10/20/2010 11Piloted Solution Key Learnings ? SAP Cumbersome and slows repair process ? Use SAP...

  17. Undergraduate Program Time Limits and Work Schedules

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    appointments, post-master's appointments, and GRA students working on a thesis or dissertation are excluded from the 30-hour per week work restriction. Summer students All...

  18. Federal Utility Partnership Working Group Utility Partners

    Broader source: Energy.gov [DOE]

    Federal Utility Partnership Working Group (FUPWG) utility partners are eager to work closely with Federal agencies to help achieve energy management goals.

  19. Federal Utility Partnership Working Group Meeting Chairman's...

    Office of Environmental Management (EM)

    Meeting Chairman's Corner Federal Utility Partnership Working Group Meeting Chairman's Corner Presentation-given at the Fall 2012 Federal Utility Partnership Working Group (FUPWG)...

  20. Federal Utility Partnership Working Group Meeting: Washington...

    Broader source: Energy.gov (indexed) [DOE]

    Federal Utility Partnership Working Group Meeting: Washington Update fupwgspring12unruh.pdf More Documents & Publications Federal Utility Partnership Working Group Meeting:...

  1. Federal Utility Partnership Working Group Participants | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Participants Federal Utility Partnership Working Group Participants The following Federal agencies have participated in the Federal Utility Partnership Working Group or engaged in...

  2. Federal Utility Partnership Working Group Seminar: Chairman's...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federal Utility Partnership Working Group Seminar: Chairman's Corner Federal Utility Partnership Working Group Seminar: Chairman's Corner Presentation covers the Federal Utility...

  3. Federal Utility Partnership Working Group Meeting: Washington...

    Energy Savers [EERE]

    Federal Utility Partnership Working Group Meeting: Washington Update Federal Utility Partnership Working Group Meeting: Washington Update Presentation-given at the Fall 2012...

  4. Licensing Support Network: An Electronic Discovery System

    SciTech Connect (OSTI)

    Gil, A. V.; Jensen, D.; McKinnon, B.

    2002-02-26T23:59:59.000Z

    The necessary authorization for the U. S. Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM) to submit a License Application (LA) is contingent upon the policy process defined in the Nuclear Waste Policy Act, as amended (NWPA), with some steps yet to occur. In spite of this uncertainty, the DOE must take prudent and appropriate action now, and over the next several years, to prepare for submittal of an application and to facilitate the U. S. Nuclear Regulatory Commission (NRC) review of this application, if the Yucca Mountain site is recommended and approved for repository development. One of these steps the DOE has taken involves working with the NRC's Advisory Review Panel to develop Licensing Support Network (LSN) requirements and guidelines. The NRC has made a prototype of the LSN web page available at www.LSNNET.gov. The OCRWM part of the LSN currently has an indefinite life cycle and may need to remain in existence until the repository is closed, which could be as long as 325 years.

  5. Covariance evaluation work at LANL

    SciTech Connect (OSTI)

    Kawano, Toshihiko [Los Alamos National Laboratory; Talou, Patrick [Los Alamos National Laboratory; Young, Phillip [Los Alamos National Laboratory; Hale, Gerald [Los Alamos National Laboratory; Chadwick, M B [Los Alamos National Laboratory; Little, R C [Los Alamos National Laboratory

    2008-01-01T23:59:59.000Z

    Los Alamos evaluates covariances for nuclear data library, mainly for actinides above the resonance regions and light elements in the enUre energy range. We also develop techniques to evaluate the covariance data, like Bayesian and least-squares fitting methods, which are important to explore the uncertainty information on different types of physical quantities such as elastic scattering angular distribution, or prompt neutron fission spectra. This paper summarizes our current activities of the covariance evaluation work at LANL, including the actinide and light element data mainly for the criticality safety study and transmutation technology. The Bayesian method based on the Kalman filter technique, which combines uncertainties in the theoretical model and experimental data, is discussed.

  6. FY 1996 annual work plan

    SciTech Connect (OSTI)

    NONE

    1995-09-30T23:59:59.000Z

    In April 1994, the Department of Energy (DOE) Strategic Plan was issued. This Plan presents the Department`s strategic outlook in response to a changing world. It discusses the Department`s unique capabilities; its mission, vision, and core values; and key customer and stakeholder considerations. The DOE Strategic Plan lists business strategies and critical success factors which are intended to aid the Department in accomplishing its mission and reaching its vision of itself in the future. The Office of Inspector General (OIG) has an important role in carrying out the goals and objectives of the Secretary`s Strategic Plan. The ultimate goal of the OIG is to facilitate positive change by assisting its customers, responsible Government officials, in taking actions to improve programs and operations. The Inspector General annually issues his own Strategic Plan that contains program guidance for the next fiscal year. As part of its responsibility in carrying out the OIG mission, the Office of the Deputy Inspector General for Audit Services (Office of Audit Services) publishes an Annual Work Plan that sets forth audits that are planned for the next fiscal year. Selection of these audits is based on the overall budget of the Department, analyses of trends in Departmental operations, guidance contained in the agency`s strategic plans, statutory requirements, and the expressed needs and audit suggestions of Departmental program managers and OIG managers and staff. This work plan includes audits that are carried over from FY 1995 and audits scheduled to start during FY 1996. Audits included in the plan will be performed by OIG staff.

  7. Education Abroad Curriculum Integration Support Grants

    E-Print Network [OSTI]

    Education Abroad Curriculum Integration Support Grants Application of a larger pool of nearly $30,000 for new international education abroad initiatives Criteria 1. Education Abroad Curriculum Integration Support Grants are to be applied

  8. Supporting Technical Documents | Department of Energy

    Office of Environmental Management (EM)

    Environmental Department (NMED) Los Alamos National Laboratory (LANL) Hazardous Waste Facility Permit Supporting Technical Document for the Radiological Release Accident...

  9. Stabilized fuel with silica support structure

    SciTech Connect (OSTI)

    Poco, J.F.; Hrubesh, L.W.

    1991-12-31T23:59:59.000Z

    This report describes a stabilized fuel which is supported by a silica support structure. The silica support structure provides a low density, high porosity vehicle for safely carrying hydrocarbon fuels. The silica support structure for hydrocarbon fuel does not produce toxic material residues on combustion which would pose environmentally sensitive disposal problems. The silica stabilized fuel composition is useful as a low temperature, continuous burning fire starter for wood or charcoal.

  10. Office of Inspector General report on audit of controls over the ADP support services contract

    SciTech Connect (OSTI)

    NONE

    1997-08-15T23:59:59.000Z

    In March 1995, the Department awarded a cost-plus-award-fee contract to DynCorp valued at approximately $246 million over 5 years for ADP support services at Headquarters. The performance period for the contract was a 3-year base period with two 1-year options. The contract statement of work identified 24 information management functional areas that required technical support services, including Automated Office Systems Support and Local Area Network support. The purpose of the audit was to evaluate the cost-plus-award-fee contract for ADP support services at Headquarters. The objective was to determine whether the Department`s program offices at Headquarters were managing their ADP support services contract costs.

  11. Policy support activities Brazil Rural Energy

    E-Print Network [OSTI]

    1 Policy support activities Brazil Rural Energy Enterprise Development (B-REED) Juan Zak UNEP Risoe Centre Annual Management Meeting Fortaleza, July ­ 2004 #12;2 B-REED policy support · B-REED should perform three policy support activities for local/state/federal governments. · Although small in nature

  12. Puerto Rico Disaster Decision Support Tool

    E-Print Network [OSTI]

    Firestone, Jeremy

    Puerto Rico Disaster Decision Support Tool: An innovative step towards community resilience Support Tool Pilot Internet-based scalable mapping server Emergency management geo-referenced information for all municipalities in Puerto Rico #12;Disaster Decision Support Tool (DDST) What is a GIS

  13. EFCOG Work Management Sub-Working Group Session on Overview and...

    Broader source: Energy.gov (indexed) [DOE]

    EFCOG Work Management Sub-Working Group Session on Overview and Results from WP&C Assist Visits across Complex EFCOG Work Management Sub-Working Group Session on Overview and...

  14. End Calorimeter Support Carriage Analysis

    SciTech Connect (OSTI)

    Weber, K.; Luther, R.; /Fermilab

    1991-02-26T23:59:59.000Z

    The design of the EC carriage is based on the design of the CC carriage documented in D-0 Engineering Note 3740.215-EN-14. The non-symmetric weight distribution of the EC cryostat results in uneven loading of the arms of the EC carriage. The design load on each rear arm is 220,000 lb, while each front arm supports 40,000 lb. (The CC carriage design load was 200,000 lb on all four arms.) ANSYS finite element models were made representing various combinations of plate thicknesses in an attempt to balance the deflections of the arms. In the final design a 3/4-inch curved top plate is used with an additional 1.75-inch thick 'doubler plate' incorporated into the rear arms. The bottom flanges are 2-inch and 3/4-inch for the rear and front arms, respectively. Web plates are 3/4-inch for all arms. The carriage bottom plate is 2-inch thick, and other details are similar to the CC design.

  15. (Technical and engineering support for the Office of Industrial Programs)

    SciTech Connect (OSTI)

    Not Available

    1991-01-01T23:59:59.000Z

    As of April 19, 1991, technical, operational and analytic support and assistance to the offices and divisions of the Office of Renewable Energy, under contract DE-AC01-86CE30844 was completed. The overall work effort, initiated February 20, 1986, was characterized by timely, comprehensive, high quality, professional responsiveness to a broad range of renewable energy program operational support requirements. These are no instances of failure to respond, nor unacceptable response, during the five-year period. The technology program areas covered are Solar Buildings Technology, Wind Energy Technology, Photovoltaic Energy Technology, Geothermal Energy Technology, Biofuels and Municipal Waste Technology, Solar Thermal Technology, Hydropower Energy Technology, Ocean Energy Technology, and Electric Energy Systems and Energy Storage. The analytical and managerial support provided to the office and staff of the Deputy Assistant Secretary for Renewable Energy enabled a comprehensive evaluation of program and policy alternatives, and the selection and execution of appropriate courses of action from amongst those alternatives. Largely through these means the Office has been able to maintain continuity and a meaningful program thrust through the vacillations of policies and budgets that it has experienced over that it has experienced over the past five years. Appended are summaries of support activities within each of the individual technology program areas, as well as a complete listing of all project deliverables and due-dates for each submittal under the contract.

  16. In-situ bioremediation drilling and characterization work plan

    SciTech Connect (OSTI)

    Koegler, K.J.

    1994-04-26T23:59:59.000Z

    This work plan describes the design and construction of proposed wells and outlines the characterization activities to be performed in support of the In Situ Bioremediation Task for FY 1994. The purpose of the well-design is to facilitate implementation and monitoring of in situ biodegradation of CCl{sub 4} in ground water. However, the wells will also be used to characterize the geology, hydrology, microbiology, and contaminant distribution, which will all feed into the design of the technology. Implementation and design of this remediation demonstration technology will be described separately in an integrated test plan.

  17. In-well vapor stripping drilling and characterization work plan

    SciTech Connect (OSTI)

    Koegler, K.J.

    1994-03-13T23:59:59.000Z

    This work plan provides the information necessary for drilling, sampling, and hydrologic testing of wells to be completed in support of a demonstration of the in-well vapor stripping system. The in-well vapor stripping system is a remediation technology designed to preferentially extract volatile organic compounds (VOCs) from contaminated groundwater by converting them to a vapor phase. Air-lift pumping is used to lift and aerate groundwater within the well. The volatiles escaping the aerated water are drawn off by a slight vacuum and treated at the surface while the water is allowed to infiltrate the vadose zone back to the watertable.

  18. Workforce Retention Work Group | Department of Energy

    Energy Savers [EERE]

    skilled workforce retention; health, safety and productivity; and especially preventive health care. Inform and support improvement andor development of wellness, fitness, and...

  19. Relationships among Perceived Working Hours, General Stress, Work Centrality, Job Control, Job Demands, and Work Condition Constraints

    E-Print Network [OSTI]

    Kim, Se Hoon

    2014-06-27T23:59:59.000Z

    Although working hours are generally regarded as a major indicator of stress, little exploration has been done about how working hours influence stress with the relevant individual and job characteristics. The purpose of this study was to examine...

  20. The effectiveness of simulated robots for supporting the learning of introductory programming: A multi-case case study

    E-Print Network [OSTI]

    Major, L.; Kyriacou, T.; Brereton, P.

    2014-09-30T23:59:59.000Z

    This work investigates the effectiveness of simulated robots as tools to support the learning of programming. After the completion of a Systematic Review and exploratory research a multi-case case study was undertaken. A simulator, named Kebot...

  1. Hanford Site Environmental Restoration Program 1994 fiscal year work plan. Work breakdown structure 2.0: Revision 1

    SciTech Connect (OSTI)

    Not Available

    1993-12-22T23:59:59.000Z

    Site Management System (SMS) guidance requires a Fiscal Year Work Plan (FYWP) to be prepared for the Environmental Restoration (ER) Mission Area and all related programs. This revision is a complete update to cover the FY 1994 time period. This document describes the overall ER Missions Area and provides FYWP appendices for each of the following five program areas: Remedial Action (RA); Decontamination and Decommissioning (D&D); Project Management and Support (PM&S); Surveillance and Maintenance (S&M); and Disposal Facilities (DF).

  2. An Integrated Suite of Tools to support Human Factors Engineering

    SciTech Connect (OSTI)

    Jacques V Hugo

    2001-08-01T23:59:59.000Z

    Human Factors Engineering (HFE) work for the nuclear industry imposes special demands on the practitioner in terms of the scope, complexity and safety requirements for humans in nuclear installations. Unfortunately HFE lags behind other engineering disciplines in the development and use of modern, powerful tools for the full range of analysis and design processes. HFE does not appear to be an attractive market for software and hardware developers and as a result, HFE practitioners usually have to rely on inefficient general-purpose tools like standard office software, or they have to use expensive special-purpose tools that offer only part of the solution they require and which also do not easily integrate with other tools. There have been attempts to develop generic software tools to support the HFE analyst and also to achieve some order and consistency in format and presentation. However, in spite of many years of development, very few tools have emerged that have achieved these goals. This would suggest the need for special tools, but existing commercial products have been found inadequate and to date not a single tool has been developed that adequately supports the special requirements of HFE work for the nuclear industry. This paper describes an integrated suite of generic as well as purpose-built tools that facilitate information solicitation, issues tracking, work domain analysis, functional requirements analysis, function allocation, operational sequence analysis, task analysis and development of HSI design requirements. In combination, this suite of tools supports the analytical as well as the representational aspects of key HFE activities primarily for new NPPs, including capturing information from subject matter experts and various source documents directly into the appropriate tool and then linking, analyzing and extending that information further to represent detailed functional and task information, and ultimately HSI design requirements. The paper also describes a tool developed especially for functional requirements analysis, function allocation, and task analysis.

  3. Simulink/PARS Integration Support

    SciTech Connect (OSTI)

    Vacaliuc, B. [ORNL] [ORNL; Nakhaee, N. [Sundance DSP, Inc.] [Sundance DSP, Inc.

    2013-12-18T23:59:59.000Z

    The state of the art for signal processor hardware has far out-paced the development tools for placing applications on that hardware. In addition, signal processors are available in a variety of architectures, each uniquely capable of handling specific types of signal processing efficiently. With these processors becoming smaller and demanding less power, it has become possible to group multiple processors, a heterogeneous set of processors, into single systems. Different portions of the desired problem set can be assigned to different processor types as appropriate. As software development tools do not keep pace with these processors, especially when multiple processors of different types are used, a method is needed to enable software code portability among multiple processors and multiple types of processors along with their respective software environments. Sundance DSP, Inc. has developed a software toolkit called PARS, whose objective is to provide a framework that uses suites of tools provided by different vendors, along with modeling tools and a real time operating system, to build an application that spans different processor types. The software language used to express the behavior of the system is a very high level modeling language, Simulink, a MathWorks product. ORNL has used this toolkit to effectively implement several deliverables. This CRADA describes this collaboration between ORNL and Sundance DSP, Inc.

  4. Santander (Spain), July 1-5, 2008 Laforcade-Zendagui-Barr 1 Supporting the Specification ofSupporting the Specification of

    E-Print Network [OSTI]

    Laforcade, Pierre

    Santander (Spain), July 1-5, 2008 Laforcade-Zendagui-Barré 1 Supporting the Specification of #12;Santander (Spain), July 1-5, 2008 Laforcade-Zendagui-Barré 2 Outline 1. Research context. Summary and ongoing work #12;Santander (Spain), July 1-5, 2008 Laforcade-Zendagui-Barré 3 Research Context

  5. How to design and establish a computer bulletin board to support inventors

    SciTech Connect (OSTI)

    Not Available

    1991-12-31T23:59:59.000Z

    This booklet is a ``how-to handbook`` to demonstrate the development of an interactive electronic bulletin board as a support network for independent inventors and small business inventors. This will explain step-by-step, how Linking Alaskan Minds{trademark}, the Alaskan model of an interactive computer bulletin board system, was developed and designed to serve as a successfully working, interactive computer bulletin board that links and supports independent inventors in Alaska.

  6. How to design and establish a computer bulletin board to support inventors

    SciTech Connect (OSTI)

    Not Available

    1991-01-01T23:59:59.000Z

    This booklet is a how-to handbook'' to demonstrate the development of an interactive electronic bulletin board as a support network for independent inventors and small business inventors. This will explain step-by-step, how Linking Alaskan Minds{trademark}, the Alaskan model of an interactive computer bulletin board system, was developed and designed to serve as a successfully working, interactive computer bulletin board that links and supports independent inventors in Alaska.

  7. LOW TEMPERATURE CATHODE SUPPORTED ELECTROLYTES

    SciTech Connect (OSTI)

    Harlan U. Anderson; Fatih Dogan; Vladimir Petrovsky

    2002-03-31T23:59:59.000Z

    This project has three main goals: Thin Films Studies, Preparation of Graded Porous Substrates and Basic Electrical Characterization and testing of Planar Single Cells. This period has continued to address the problem of making dense 1/2 to 5 {micro}m thick dense layers on porous substrates (the cathode LSM). Our current status is that we are making structures of 2-5 cm{sup 2} in area, which consist of either dense YSZ or CGO infiltrated into a 2-5 {micro}m thick 50% porous layer made of either nanoncrystalline CGO or YSZ powder. This composite structure coats a macroporous cathode or anode; which serves as the structural element of the bi-layer structure. These structures are being tested as SOFC elements. A number of structures have been evaluated both as symmetrical and as button cell configuration. Results of this testing indicates that the cathodes contribute the most to cell losses for temperatures below 750 C. In this investigation different cathode materials were studied using impedance spectroscopy of symmetric cells and IV characteristics of anode supported fuel cells. Cathode materials studied included La{sub 0.8}Sr{sub 0.2}Co{sub 0.2}Fe{sub 0.8}O{sub 3} (LSCF), La{sub 0.7}Sr{sub 0.2}MnO{sub 3} (LSM), Pr{sub 0.8}Sr{sub 0.2}Fe{sub 0.8}O{sub 3} (PSCF), Sm{sub 0.8}Sr{sub 0.2}Co{sub 0.2}Fe{sub 0.8}O{sub 3} (SSCF), and Yb{sub .8}Sr{sub 0.2}Co{sub 0.2}Fe{sub 0.8}O{sub 3} (SSCF). A new technique for filtering the Fourier transform of impedance data was used to increase the sensitivity of impedance analysis. By creating a filter specifically for impedance spectroscopy the resolution was increased. The filter was tailored to look for specific circuit elements like R//C, Warburg, or constant phase elements. As many as four peaks can be resolved using the filtering technique on symmetric cells. It may be possible to relate the different peaks to material parameters, like the oxygen exchange coefficient. The cathode grouped in order from lowest to highest ASR is LSCF < PSCF < SSCF < YSCF < LSM. The button cell results agree with this ordering indicating that this is an important tool for use in developing our understanding of electrode behavior in fuel cells.

  8. Locking support for nuclear fuel assemblies

    DOE Patents [OSTI]

    Ledin, Eric (San Diego, CA)

    1980-01-01T23:59:59.000Z

    A locking device for supporting and locking a nuclear fuel assembly within a cylindrical bore formed by a support plate, the locking device including a support and locking sleeve having upwardly extending fingers forming wedge shaped contact portions arranged for interaction between an annular tapered surface on the fuel assembly and the support plate bore as well as downwardly extending fingers having wedge shaped contact portions arranged for interaction between an annularly tapered surface on the support plate bore and the fuel assembly whereby the sleeve tends to support and lock the fuel assembly in place within the bore by its own weight while facilitating removal and/or replacement of the fuel assembly.

  9. Elmira Stove Works: Order (2011-CE-1407)

    Broader source: Energy.gov [DOE]

    DOE ordered Elmira Stove Works to pay a $6,000 civil penalty after finding Elmira Stove Works had failed to certify that certain models of refrigerator-freezers comply with the applicable energy conservation standard.

  10. From Higher Education To Work In West

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    From Higher Education To Work In West Virginia 2009 Summary Results For Work Participation Virginia Higher Education Policy Commission By George W. Hammond, Associate Director Adam Hoffer, Graduate Virginia Higher Education Policy Commission. Opinions expressed herein are the responsibility

  11. Elements of doing work at SSRL (rev

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    follow JHAMs, safety procedures, and work plans (e.g., non-routine JHAMs, equipment lockout procedures, and radiation safety work control forms). 2. Ensure STAs are up to date...

  12. Quality of work concept and measurement

    E-Print Network [OSTI]

    Dahlm, Svenn-ge; Nesheim, Torstein; Olsen, Karen M

    2009-01-01T23:59:59.000Z

    In this paper we review some of the most essential literature on the concept and measurement of quality of work. We show that different academic fields have conceptualized quality of work in distinct ways however there has been a convergence...

  13. Identity work and control in occupational communities

    E-Print Network [OSTI]

    Van Maanen, John

    This chapter is about three highly intertwined concepts. The first concerns occupational communities and the work cultures they nourish. The second concerns the work identities that are valued (and devalued) in such ...

  14. Program Title Electrical Safe Work Practices

    E-Print Network [OSTI]

    Pawlowski, Wojtek

    Program Title Electrical Safe Work Practices Program No. Classification Occupational Safety the next scheduled outage: ______________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ ___________________________________________ __________________ Requester/Title Date PART II: TO BE COMPLETED BY THE ELECTRICALLY QUALIFIED PERSONS DOING THE WORK: (1

  15. KIVA Modeling to Support Diesel Combustion Research

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Merit Review KIVA Modeling to Support Diesel Combustion Research DOE Vehicle Technologies Program Annual Merit Review, FY2008 David Torres Los Alamos National Laboratory...

  16. Obama Administration Announces Competition to Showcase, Support...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Obama Administration Announces Competition to Showcase, Support Local and Tribal Climate Action; Applications Due Oct. 27 Obama Administration Announces Competition to Showcase,...

  17. Modular power converter having fluid cooled support

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Radosevich, Lawrence D.; Meyer, Andreas A.; Gollhardt, Neil; Kannenberg, Daniel G.

    2005-09-06T23:59:59.000Z

    A support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support, in conjunction with other packaging features may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  18. Modular power converter having fluid cooled support

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Radosevich, Lawrence D.; Meyer, Andreas A.; Gollhardt, Neil; Kannenberg, Daniel G.

    2005-12-06T23:59:59.000Z

    A support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support, in conjunction with other packaging features may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  19. Report Explains How Bioenergy Supports Global Sustainability...

    Office of Environmental Management (EM)

    productivity and environmental health, and provides a vision for sustainably reducing poverty and reliance on dwindling fossil resources. BETO funding supports researchers from...

  20. Voluntary Protection Program Onsite Review, Infrastructure Support...

    Office of Environmental Management (EM)

    2013 Voluntary Protection Program Onsite Review, Infrastructure Support Contract Paducah Gaseous Diffusion Plant - May 2013 May 2013 Evaluation to determine whether Infrastructure...

  1. Voluntary Protection Program Onsite Review, Infrastructure Support...

    Office of Environmental Management (EM)

    2012 Voluntary Protection Program Onsite Review, Infrastructure Support Contract Paducah Gaseous Diffusion Plant - March 2012 March 2012 Evaluation to determine whether the...

  2. Office of Environmental Protection, Sustainability Support &...

    Office of Environmental Management (EM)

    protection issues. The Office manages and promotes mission support programs and provides analysis of Department of Energy (DOE)-wide performance in protecting the public, the...

  3. Sacramento Area Voltage Support - Environment - Sierra Nevada...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (SMUD), Roseville Electric (Roseville), and the California Independent System Operator (ISO) grid. Western prepared a Sacramento Voltage Support (SVS) Draft Environmental Impact...

  4. Solar Industry at Work | Laila Mattos

    ScienceCinema (OSTI)

    Mattos, Laila

    2013-05-29T23:59:59.000Z

    Laila Mattos, a technology manager at Alta Devices, talks about what it means to work for a "disruptive" solar company.

  5. @ work' video segment features Robotic Software Engineer

    ScienceCinema (OSTI)

    Idaho National Laboratory

    2010-01-08T23:59:59.000Z

    @ work highlights Idaho National Laboratory employees and the jobs they perform.This segment features Robotic Software Engineer Miles Walton.

  6. How to Work With the Media Webinar

    Broader source: Energy.gov [DOE]

    How to Work With the Media Webinar, from the U.S. Department of Energy's Better Buildings Neighborhood Program.

  7. Agenda: High Temperature Membrane Working Group Meeting

    Broader source: Energy.gov [DOE]

    Agenda for the High Temperature Membrane Working Group (HTMWG) meeting on May 18, 2009, in Arlington, Virginia

  8. TRIMBLE BUSINESS CENTER TUTORIAL Working with Corridors

    E-Print Network [OSTI]

    Ahmad, Sajjad

    BUSINESS CENTER TUTORIAL Working with Corridors 2 Corporate Office Trimble Navigation Limited EngineeringF TRIMBLE BUSINESS CENTER TUTORIAL Working with Corridors Contents About this tutorial BUSINESS CENTER TUTORIAL Working with Corridors 3 About this tutorial A "corridor" is a 3D model

  9. Eye Safety At Work Is Everyone's Business.

    E-Print Network [OSTI]

    Baker, Chris I.

    Eye Safety At Work Is Everyone's Business. Preventing Work-Related Eye Injuries Each day, about 2,000 U.S. workers receive medical treatment because of eye injuries sustained at work. Workplace injury is a leading cause of eye trauma, vision loss, disability, and blindness, and can interfere with your ability

  10. WORK PLATFORMS and SCAFFOLDING Table Of Contents

    E-Print Network [OSTI]

    US Army Corps of Engineers

    EM 385-1-1 XX Sep 13 i Section 22 WORK PLATFORMS and SCAFFOLDING Table Of Contents Section: Page 22 (Personnel) Platforms...................22-33 22.L Elevating Work Platforms..............................................22-33 22.M Vehicle-Mounted Elevating And Rotating Work Platforms (Aerial Devices

  11. Toolbox Safety Talk Aerial Work Platforms

    E-Print Network [OSTI]

    Pawlowski, Wojtek

    Toolbox Safety Talk Aerial Work Platforms Environmental Health & Safety Facilities Safety & Health to Environmental Health & Safety for recordkeeping. Aerial work platforms are important tools and if used correctly, and equipment damage. This guide addresses safe use of aerial work platforms and provides tips to prevent

  12. Preliminary engineering studies for the support shell of the outer tracker of the SDC detector

    SciTech Connect (OSTI)

    Vandergriff, D.H.; Mayhall, J.

    1991-09-01T23:59:59.000Z

    The Solenoidal Detector Collaboration (SDC) detector is in the conceptual design phase. ORNL is currently working with various sub-groups on the design of the outer tracker portion of the SDC detector. A major focus in the outer tracker design is the structure that mounts and supports the tracking elements. This structure must meet extreme requirements of alignment and stability while containing a minimum of material. This report describes the requirements, evaluations, and analyses that have been performed on the two options being explored; a cylindrical support shell and a modular support shell.

  13. Measurements at Los Alamos National Laboratory Plutonium Facility in Support of Global Security Mission Space

    SciTech Connect (OSTI)

    Stange, Sy [Los Alamos National Laboratory; Mayo, Douglas R. [Los Alamos National Laboratory; Herrera, Gary D. [Los Alamos National Laboratory; McLaughlin, Anastasia D. [Los Alamos National Laboratory; Montoya, Charles M. [Los Alamos National Laboratory; Quihuis, Becky A. [Los Alamos National Laboratory; Trujillo, Julio B. [Los Alamos National Laboratory; Van Pelt, Craig E. [Los Alamos National Laboratory; Wenz, Tracy R. [Los Alamos National Laboratory

    2012-07-13T23:59:59.000Z

    The Los Alamos National Laboratory Plutonium Facility at Technical Area (TA) 55 is one of a few nuclear facilities in the United States where Research & Development measurements can be performed on Safeguards Category-I (CAT-I) quantities of nuclear material. This capability allows us to incorporate measurements of CAT-IV through CAT-I materials as a component of detector characterization campaigns and training courses conducted at Los Alamos. A wider range of measurements can be supported. We will present an overview of recent measurements conducted in support of nuclear emergency response, nuclear counterterrorism, and international and domestic safeguards. This work was supported by the NNSA Office of Counterterrorism.

  14. Efficient management of IT Infrastructure implementation and support at enterprise level

    E-Print Network [OSTI]

    Balakrishnan, Bhargav

    2011-01-01T23:59:59.000Z

    This paper deals with how to manage effectively in the design, implementation and support of an IT infrastructure at an enterprise level. This particular management is lacking in today's IT infrastructure scenario. Just implementation is not sufficient for an NON-IT industry, they need a proper support in the infrastructure like documentation, support work flow, ticketing systems (used for IT related issue either hardware or software) etc... Many organizations spend a lot of money for this support and they expect a lot from the provider. Many providers sign in the SLA that they will provide them with an excellent support, but 80-90% it doesn't happen. Many times they don't meet the expectations of their client. So how to make these expectations being met 100% for the client? That is what is going to be discussed in this paper with respect to ITIL framework and other technical terminologies.

  15. DOE Awards Small Business Task Order for Technical Support to...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Contract Awarded to Small Business for Support Services DOE Awards Support Service Contract DOE Awards Small Business Task Order for Technical Support to the Office of...

  16. PIA - WEB Unclassified Business Operations General Support System...

    Office of Environmental Management (EM)

    Unclassified Business Operations General Support System PIA - WEB Unclassified Business Operations General Support System PIA - WEB Unclassified Business Operations General Support...

  17. APS Engineering Support Division (AES) | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APS Engineering Support Division (AES) The APS Engineering Support Division provides reliable operations and technical support to the Advanced Photon Source user community. AES...

  18. A Model to Predict Work-Related Fatigue Based on Hours of Work

    E-Print Network [OSTI]

    A Model to Predict Work-Related Fatigue Based on Hours of Work Gregory D. Roach, Adam Fletcher, and Drew Dawson ROACH GD, FLETCHER A, DAWSON D. A model to predict work- related fatigue based on hours

  19. Great Works Academic Certificate Program Great Works of Our Intellectual Heritage

    E-Print Network [OSTI]

    Hemmers, Oliver

    Great Works Academic Certificate Program Great Works of Our Intellectual Heritage Not all works-Reckoner) Apollonius of Perga (c. 262 - c. 190 BCE) On Conic Sections Ssu-ma Ch'ien (c. 145 - c. 85 BCE) Historical

  20. FLORIDA STATE UNIVERSITY Participant Support Costs

    E-Print Network [OSTI]

    Weston, Ken

    FLORIDA STATE UNIVERSITY Policy on Participant Support Costs Effective: May 15, 2006 Purpose costs are separately accounted for, and expended for appropriate and intended objectives. Background in the conference, workshop or training activity. Participant supports costs are defined as direct costs for items

  1. Creating Addressable Aqueous Microcompartments above Solid Supported

    E-Print Network [OSTI]

    combinatorial libraries of solid supported fluid lipid membranes because these systems retain many a novel soft lithographic technique5 for partitioning and addressing aqueous solutions above supported methodology affords the ability to create a large number of aqueous compartments consisting of various

  2. Metal-supported solid oxide fuel cells

    SciTech Connect (OSTI)

    Villarreal, I.; Jacobson, C.; Leming, A.; Matus, Y.; Visco, S.; De Jonghe, L.

    2003-01-07T23:59:59.000Z

    Low cost, colloidal deposition methods have been utilized to produce novel solid oxide fuel cell structures on metal alloy support electrodes. YSZ films were deposited on iron-chrome supports on top of a thin Ni/YSZ catalytic layer, and sintered at 1350 degrees C, in a reducing atmosphere. Dense, 20??m YSZ electrolyte films were obtained on highly porous stainless steel substrates.

  3. METROPOLITAN TRANSPORTATION SUPPORT INITIATIVE (METSI) QUARTERLY REPORT

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    METROPOLITAN TRANSPORTATION SUPPORT INITIATIVE (METSI) QUARTERLY REPORT for the quarter ending over 50%) of residents throughout the state of Illinois would support a 5 cent per gallon gas tax if the proceeds were to improve roads and transit. The other survey, 2002 Market Survey undertaken by RTA examined

  4. OASIS Dedicated User Support 2010 Annual report

    E-Print Network [OSTI]

    ISENES WP4 OASIS Dedicated User Support 2010 Annual report E. Maisonnave, S. Valcke TR/CMGC/11/28 #12;Abstract Three missions complemented the OASIS Dedicated User support program in 2010. Focused on high performance configurations, these actions consisted in: testing OASIS3 on a high resolution

  5. Solar collector mounting and support apparatus

    SciTech Connect (OSTI)

    Hutchison, J.A.

    1981-12-22T23:59:59.000Z

    A solar collector system is described of the type having a movable surface for receiving solar radiation having improved means for rotatably supporting the movable surface and for rotating the collector surface. A support axle for the collector includes a ball at one end which is carried within a cylindrical sleeve in the solar collector to support the weight of the collector. A torque transmitting arm comprising a flexible flat strip is connected at one end to the axle and at the other end to the collector surface. An improved rotational drive mechanism includes a first sprocket wheel carried on the axle and a second sprocket wheel supported on a support pylon with a drive chain engaging both sprockets. A double acting piston also supported by the pylon is coupled to the chain so that the chain may be driven by a hydraulic control system to rotate the collector surfaces as required. An improved receiver tube support ring is also provided for use with the improved mounting and support apparatus to improve overall efficiency by reducing thermal losses.

  6. Extending Programming Environments to Support Architectural Design

    E-Print Network [OSTI]

    Holt, Richard C.

    environments are tightly integrated tool sets that support the production of source code in a programming, debugging, and source code browsing. These en­ vironments, however, do not necessarily support nota­ tions of programming environments 1 include Smalltalk [11] and Interlisp [28] from Xerox Parc, In­ tegral C [25] from

  7. Reactive Power Support Services in Electricity Markets

    E-Print Network [OSTI]

    Reactive Power Support Services in Electricity Markets Costing and Pricing of Ancillary Services Reactive Power Support Services in Electricity Markets Costing and Pricing of Ancillary Services Project this Project For information about this project contact: Peter W. Sauer, Project Leader Professor Electrical

  8. Support at MMU A Guide for

    E-Print Network [OSTI]

    Support at MMU A Guide for Disabled Students and Students with Dyslexia #12;Access Summit Joint 10 Disclosure of disability 10 What is medical evidence 12 Dyslexia and other specific learning learning difficulties, such as dyslexia have appropriate study related support. This guide provides

  9. | 2013 Computer Science62 Advice and support

    E-Print Network [OSTI]

    Sun, Jing

    | 2013 Computer Science62 Advice and support for students Scholarships and prizes 53 Computerfacilitiesandlabs 55 Student support services 56 #12;Scholarships and prizes Computer Science students-Tick Scholarships for Postgraduate Study in Computer Science Awarded to two students taking a Bachelor of Science

  10. | 2012 Computer Science62 Advice and support

    E-Print Network [OSTI]

    Sun, Jing

    | 2012 Computer Science62 Advice and support for students Scholarships and prizes 53 Computerfacilitiesandlabs 55 Student support services 56 #12;Scholarships and prizes Computer Science students of the best 60 points in Stage III Computer Science courses for that year. Computer Science Annual Prize 2010

  11. QUEEN'S UNIVERSITY BELFAST Student Support Fund Framework

    E-Print Network [OSTI]

    Paxton, Anthony T.

    that it continues to comply with best practice and the Department for Employment and Learning (NI) Support Funds of awards made will be dependent upon a number of factors including demand made on the fund each year shortfall, being claimed, is unexpected. 3. Roles and Responsibilities 3.1 There is a Student Support Fund

  12. IT Support for Sustainable Development in Organizations

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    IT Support for Sustainable Development in Organizations Andreas Moeller and Arno Rolf Leuphana phase of sustainable development, as well as their contributions to modified or new generalized action in economics) and systemic mechanisms. With respect to sustainable development, new concepts supporting

  13. you'll be encouraged and supported

    E-Print Network [OSTI]

    Albrecht, David

    for your wellbeing. Our teachers are always available to help you get to know the Australian culture and to provide advice for your transition into tertiary study. Learning support You are here to learn. That's why each of our programs includes a support system, matched to your academic level, designed to help your

  14. G1 Account: Guest Account Supporting Documentation

    E-Print Network [OSTI]

    Vertes, Akos

    G1 Account: Guest Account Supporting Documentation Phone: 202-994-7900 Fax: 202-994-4747 Email: acadtech@gwu.edu Web: http://acadtech.gwu.edu Supporting Documentation: Based on your role, please provide the Special Account Request Form along with reservation documentation from the Office of Academic Scheduling

  15. LOW TEMPERATURE CATHODE SUPPORTED ELECTROLYTES

    SciTech Connect (OSTI)

    Harlan U. Anderson

    2000-03-31T23:59:59.000Z

    This project has three main goals: Thin Films Studies, Preparation of Graded Porous Substrates and Basic Electrical Characterization and Testing of Planar Single Cells. During this time period substantial progress has been made in developing low temperature deposition techniques to produce dense, nanocrystalline yttrium-stabilized zirconia films on both dense oxide and polymer substrates. Progress has been made in the preparation and characterization of thin electrolytes and porous LSM substrates. Both of these tasks are essentially on or ahead of schedule. In our proposal, we suggested that the ZrO{sub 2}/Sc system needed to be considered as a candidate as a thin electrolyte. This was because microcrystalline ZrO{sub 2}/Sc has a significantly higher ionic conductivity than YSZ, particularly at the lower temperatures. As a result, some 0.5 micron thick film of ZrO{sub 2}/16% Sc on an alumina substrate (grain size 20nm) was prepared and the electrical conductivity measured as a function of temperature and oxygen activity. The Sc doped ZrO{sub 2} certainly has a higher conductivity that either 20nm or 2400nm YSZ, however, electronic conductivity dominates the conductivity for oxygen activities below 10{sup -15}. Whereas for YSZ, electronic conductivity is not a problem until the oxygen activity decreases below 10{sup -25}. These initial results show that the ionic conductivity of 20nm YSZ and 20nm ZrO{sub 2}/16% Sc are essentially the same and the enhanced conductivity which is observed for Sc doping in microcrystalline specimens is not observed for the same composition when it is nanocrystalline. In addition they show that the electronic conductivity of Sc doped ZrO{sub 2} is at least two orders of magnitude higher than that observed for YSZ. The conclusion one reaches is that for 0.5 to 1 micron thick nanocrystalline films, Sc doping of ZrO{sub 2} has no benefits compared to YSZ. As a result, electrolyte films of ZrO{sub 2}/Sc should not be considered as candidates. However, they have the potential of being useful as an interface on the anode side of the electrolyte. NexTech has focused much of its effort during the past few months on establishing tape casting methods for porous LSM substrates. This work, performed under a separate DOE-funded program, involved tape casting formulations comprising LSM powders with bi-modal particle size distributions and fugitive pore forming additives. Sintered LSM substrates with porosities in the 30 to 40 vol% range, and pore sizes of 10 {approx} 20 microns have been prepared. In addition, tape casting formulations involving composite mixtures of LSM and Sm-doped ceria (SDC) have been evaluated. The LSM/SDC cathode substrates are expected to provide better performance at low temperatures. Characterization of these materials is currently underway.

  16. LOW TEMPERATURE CATHODE SUPPORTED ELECTROLYTES

    SciTech Connect (OSTI)

    Harlan U. Anderson; Wayne Huebner; Igor Kosacki

    2001-09-30T23:59:59.000Z

    This project has three main goals: Thin Films Studies, Preparation of Graded Porous Substrates and Basic Electrical Characterization and testing of Planar Single Cells. In this portion of study we have focused on producing YSZ films on porous LSM substrates. When using the polymer precursor there are a number of obstacles to overcome in order to form dense electrolyte layers on porous substrates (cathode or anode). Probably the most difficult problems are: (1) Extreme penetration of the polymer into the substrate must be prevented. (2) Shrinkage cracking must be avoided. (3) Film thickness in the 1 to 5{micro}m range must be achieved. We have demonstrated that cracking due to shrinkage involved during the elimination of solvents and organic matter and densification of the remaining oxide is not a problem as long as the resulting oxide film is < {approx} 0.15 {micro}m in thickness. We have also shown that we can make thicker films by making multiple depositions if the substrate is smooth (roughness {le} 0.1 {micro}m) and contains no surface pores > 0.2 {micro}m. The penetration of the polymer into the porous substrate can be minimized by increasing the viscosity of the polymer and reducing the largest pore at the surface of the substrate to {le} 0.2 {micro}m. We have shown that this can be done, but we have also shown that it is difficult to make dense films that are defect free with areas > 1 cm{sup 2}. This is because of the roughness of the substrate and the difficulty in making a substrate which does not have surface voids > 0.2 {micro}m. Thus the process works well for dense, smooth substrates for films < 1 {micro}m thick, but is difficult to apply to rough, porous surfaces and to make film thickness > 1 {micro}m. As a result of these problems, we have been addressing the issue of how to make dense films in the thickness range of 1 to 5 {micro}m on sintered porous substrates without introducing cracks and holes due to shrinkage and surface voids? These endeavors have lead us to a solution which we think is quite unique and should allow us to obtain flaw free dense films of thickness in the 0.5 to 5 {micro}m range at processing temperatures {le} 900{sup o}. The process involves the deposition of a slurry of nanocrystalline YSZ onto a presintered porous LSM substrate. The key element in the deposition is that the slurry contains sufficient YSZ polymer precursor to allow adhesion of the YSZ particles to each other and the surface after annealing at about 600 C. This allows the formation of a porous film of 0.5 to 5 {micro}m thick which adheres to the surface. After formation of this film, YSZ polymer precursor is allowed to impregnate the porous surface layer (capillary forces tend to confine the polymer solution in the nanoporous layer). After several impregnation/heat treatment cycles, a dense film results. Within the next few months, this process should be developed to the point that single cell measurements can be made on 0.5 to 5 {micro}m films on a LSM substrate. This type of processing allows the formation of essentially flaw free films over areas > 1 cm{sup 2}.

  17. Vane segment support and alignment device

    DOE Patents [OSTI]

    McLaurin, Leroy Dixon (Winter Springs, FL); Sizemore, John Derek (Orlando, FL)

    1999-01-01T23:59:59.000Z

    A support and alignment assembly for supporting and aligning a vane segment is provided. The support and alignment assembly comprises a torque plate which defines an opening for receiving an eccentric pin and a locking end member for receiving a lock socket member. An eccentric pin adjustably supported by the torque plate opening for supporting and aligning a vane segment is provided. A lock socket member adapted to securely receive the eccentric pin and rotated therewith, and adjustably engage the torque plate locking end is provided. The lock socket member receives the eccentric pin, such that when the eccentric pin is adjusted to align the vane segment, the lock socket member engages the torque plate locking end to secure the vane segment in the desired position.

  18. Vane segment support and alignment device

    DOE Patents [OSTI]

    McLaurin, L.D.; Sizemore, J.D.

    1999-07-13T23:59:59.000Z

    A support and alignment assembly for supporting and aligning a vane segment is provided. The support and alignment assembly comprises a torque plate which defines an opening for receiving an eccentric pin and a locking end member for receiving a lock socket member. An eccentric pin adjustably supported by the torque plate opening for supporting and aligning a vane segment is provided. A lock socket member adapted to securely receive the eccentric pin and rotated therewith, and adjustably engage the torque plate locking end is provided. The lock socket member receives the eccentric pin, such that when the eccentric pin is adjusted to align the vane segment, the lock socket member engages the torque plate locking end to secure the vane segment in the desired position. 5 figs.

  19. Web Strategies Support Center Guide Login to Web Strategies Support Center 2

    E-Print Network [OSTI]

    Chapman, Michael S.

    Web Strategies Support Center Guide Login to Web Strategies Support Center 2 Create New Requests 3 View Requests 5 Email Notification 6 Login to JIRA 7 View Ticket in JIRA 8 #12;Login to Web Strategies

  20. Supporting pupils with additional support needs in mainstream settings: the views of pupils

    E-Print Network [OSTI]

    Herd, Elizabeth

    2010-11-25T23:59:59.000Z

    This thesis is the study of experiences of a group of mainstream secondary pupils identified as having additional support needs within the terms of the Education (Additional Support For Learning ) (Scotland) Act (2004). This means that they have...

  1. NRC support for the Kalinin (VVER) probabilistic risk assessment

    SciTech Connect (OSTI)

    Bley, D. [Buttonwood Consulting, Inc. (United States); Diamond, D.J.; Chu, T.L.; Azarm, A.; Pratt, W.T. [Brookhaven National Lab., Upton, NY (United States); Johnson, D. [PLG, Inc. (United States); Szukiewicz, A.; Drouin, M.; El-Bassioni, A.; Su, T.M. [Nuclear Regulatory Commission (United States)

    1998-12-31T23:59:59.000Z

    The US Nuclear Regulatory Commission (NRC) and the Federal Nuclear and Radiation Safety Authority of the Russian Federation have been working together since 1994 to carry out a probabilistic risk assessment (PRA) of a VVER-1000 in the Russian Federation. This was a recognition by both parties that this technology has had a profound effect on the discipline of nuclear reactor safety in the West and that the technology should be transferred to others so that it can be applied to Soviet-designed plants. The NRC provided funds from the Agency for International Development and technical support primarily through Brookhaven National Laboratory and its subcontractors. The latter support was carried out through workshops, by documenting the methodology to be used in a set of guides, and through periodic review of the technical activity. The result of this effort to date includes a set of procedure guides, a draft final report on the Level 1 PRA for internal events (excluding internal fires and floods), and progress reports on the fire, flood, and seismic analysis. It is the authors belief that the type of assistance provided by the NRC has been instrumental in assuring a quality product and transferring important technology for use by regulators and operators of Soviet-designed reactors. After a thorough review, the report will be finalized, lessons learned will be applied in the regulatory and operational regimes in the Russian Federation, and consideration will be given to supporting a containment analysis in order to complete a simplified Level 2 PRA.

  2. NRC SUPPORT FOR THE KALININ (VVER) PROBABILISTIC RISK ASSESSMENT

    SciTech Connect (OSTI)

    BLEY,D.; DIAMOND,D.J.; CHU,T.L.; AZARM,A.; PRATT,W.T.; JOHNSON,D.; SZUKIEWICZ,A.; DROUIN,M.; EL-BASSIONI,A.; SU,T.M.

    1998-10-26T23:59:59.000Z

    The US Nuclear Regulatory Commission (NRC) and the Federal Nuclear and Radiation Safety Authority of the Russian Federation have been working together since 1994 to carry out a probabilistic risk assessment (PRA) of a VVER-1000 in the Russian Federation. This was a recognition by both parties that this technology has had a profound effect on the discipline of nuclear reactor safety in the West and that the technology should be transferred to others so that it can be applied to Soviet-designed plants. The NRC provided funds from the Agency for International Development and technical support primarily through Brookhaven National Laboratory and its subcontractors. The latter support was carried out through workshops, by documenting the methodology to be used in a set of guides, and through periodic review of the technical activity. The result of this effort to date includes a set of procedure guides, a draft final report on the Level 1 PRA for internal events (excluding internal fires and floods), and progress reports on the fire, flood, and seismic analysis. It is the authors belief that the type of assistance provided by the NRC has been instrumental in assuring a quality product and transferring important technology for use by regulators and operators of Soviet-designed reactors. After a thorough review, the report will be finalized, lessons learned will be applied in the regulatory and operational regimes in the Russian Federation, and consideration will be given to supporting a containment analysis in order to complete a simplified Level 2 PRA.

  3. Technology Integration Initiative In Support of Outage Management

    SciTech Connect (OSTI)

    Gregory Weatherby; David Gertman

    2012-07-01T23:59:59.000Z

    Plant outage management is a high priority concern for the nuclear industry from cost and safety perspectives. Often, command and control during outages is maintained in the outage control center where many of the underlying technologies supporting outage control are the same as those used in the 1980s. This research reports on the use of advanced integrating software technologies and hand held mobile devices as a means by which to reduce cycle time, improve accuracy, and enhance transparency among outage team members. This paper reports on the first phase of research supported by the DOE Light Water Reactor Sustainability (LWRS) Program that is performed in close collaboration with industry to examine the introduction of newly available technology allowing for safe and efficient outage performance. It is thought that this research will result in: improved resource management among various plant stakeholder groups, reduced paper work, and enhanced overall situation awareness for the outage control center management team. A description of field data collection methods, including personnel interview data, success factors, end-user evaluation and integration of hand held devices in achieving an integrated design are also evaluated. Finally, the necessity of obtaining operations cooperation support in field studies and technology evaluation is acknowledged.

  4. PURIWG Meeting: DOE Hydrogen Quality Working Group

    E-Print Network [OSTI]

    ) production by reforming of natural gas (ATR & SMR) reforming of renewable fuels, e.g., ethanol (i.e., E are being developed to support the H2A Argonne is modeling a steam reformer + PSA process Results

  5. Technical Support for China's Village Electrification Program: Cooperative Research and Development Final Report, CRADA number CRD-07-00235

    SciTech Connect (OSTI)

    Kline, D.

    2010-07-01T23:59:59.000Z

    This work has two main goals: First, it provides for the analysis of data collected from systems developed in the previous phase of China's rural power program, the Township Electrification Program Second, it will comprise joint IEE-NREL work in support of the upcoming phase, 'Electrification of Unelectrified Areas'.

  6. SUCCESSFUL CLIENTS ARE: Fully engaged and committed to work with the team

    E-Print Network [OSTI]

    Awtar, Shorya

    SUCCESSFUL CLIENTS ARE: Fully engaged and committed to work with the team for the duration of their 15-18 month project. Supportive of the educational goals of the project. The team and client may. Consistent in providing a single point of contact for the team and timely in response to team members

  7. Asbestos precautions If your work involves disturbing existing building materials, complete the asbes-

    E-Print Network [OSTI]

    McLaughlin, Richard M.

    . Contact EHS at 962-5507 for guidance. The University policy is at ehs.unc.edu>Industrial Hygiene to control exposure: ehs.unc.edu>Industrial Hygiene>Heat Stress. Working in confined spaces If you have at ehs.unc.edu>Manuals>Industrial Maintenance and Construction/Support Ser- vices Safety Manual

  8. Library Web Standards Recommendations of the SCIS Web Standards Working Group

    E-Print Network [OSTI]

    Seldin, Jonathan P.

    Library Web Standards Recommendations of the SCIS Web Standards Working Group Prepared by L. Jacobs: In support of research, teaching, and public service, the mission of the University of Lethbridge Library of the Library. Goals of Library Web Pages: To facilitate access to Library resources To supplement access

  9. Participant Support Costs Participant support is often provided for awards made primarily for organized training,

    E-Print Network [OSTI]

    Salama, Khaled

    Participant Support Costs Participant support is often provided for awards made primarily costs cannot be used for any other purpose and thus cannot be rebudgeted into other areas without sponsor approval. The purpose of these funds is to support the costs of individual participants

  10. Measurement of the Hydrophobic Force in a Soft Matter System Supporting Information Supporting Information for

    E-Print Network [OSTI]

    Chan, Derek Y C

    Measurement of the Hydrophobic Force in a Soft Matter System ­ Supporting Information 1 Supporting Information for "Measurement of the Hydrophobic Force in a Soft Matter System" Rico F. Tabor*1 , Chu Wu2.tabor@monash.edu and d.chan@unimelb.edu.au #12;Measurement of the Hydrophobic Force in a Soft Matter System ­ Supporting

  11. Turbine nozzle/nozzle support structure

    DOE Patents [OSTI]

    Boyd, G.L.; Shaffer, J.E.

    1995-08-15T23:59:59.000Z

    An axial flow turbine`s nozzle/nozzle support structure is described having a cantilevered nozzle outer structure including an outer shroud and airfoil vanes extending radially inwardly therefrom, an inner shroud radially adjacent the inner end of the airfoil vanes and cooperatively disposed relative to the outer shroud to provide an annular fluid flow path, an inner and an outer support ring respectively arranged radially inside the inner shroud and axially adjacent a portion of the outer shroud, and pins extending through such portion and into the outer support ring. The inner support ring or inner shroud has a groove therein bounded by end walls for receiving and being axially abuttable with a locating projection from the adjacent airfoil vane, inner shroud, or inner support ring. The nozzle outer structure may comprise segments each of which has a single protrusion which is axially engageable with the outer support ring or, alternatively, a first and second protrusion which are arcuately and axially separated and which include axial openings therein whereby first and second protrusions on respective, arcuately adjacent nozzle segments have axial openings therein which are alignable with connector openings in the outer support ring and within each of such aligned openings a pin is receivable. The inner shroud may, likewise, comprise segments which, when assembled in operating configuration, have a 360 degree expanse. 6 figs.

  12. Turbine nozzle/nozzle support structure

    DOE Patents [OSTI]

    Boyd, G.L.; Shaffer, J.E.

    1996-09-10T23:59:59.000Z

    An axial flow turbine`s nozzle/nozzle support structure is described having a cantilevered nozzle outer structure including an outer shroud and airfoil vanes extending radially inwardly therefrom, an inner shroud radially adjacent the inner end of the airfoil vanes and cooperatively disposed relative to the outer shroud to provide an annular fluid flow path, an inner and an outer support ring respectively arranged radially inside the inner shroud and axially adjacent a portion of the outer shroud, and pins extending through such portion and into the outer support ring. The inner support ring or inner shroud has a groove therein bounded by end walls for receiving and being axially abuttable with a locating projection from the adjacent airfoil vane, inner shroud, or inner support ring. The nozzle outer structure may comprise segments each of which has a single protrusion which is axially engageable with the outer support ring or, alternatively, a first and second protrusion which are arcuately and axially separated and which include axial openings therein whereby first and second protrusions on respective, arcuately adjacent nozzle segments have axial openings therein which are alignable with connector openings in the outer support ring and within each of such aligned openings a pin is receivable. The inner shroud may, likewise, comprise segments which, when assembled in operating configuration, have a 360 degree expanse. 6 figs.

  13. Turbine nozzle/nozzle support structure

    DOE Patents [OSTI]

    Boyd, G.L.; Shaffer, J.E.

    1997-01-07T23:59:59.000Z

    An axial flow turbine`s nozzle/nozzle support structure is described having a cantilevered nozzle outer structure including an outer shroud and airfoil vanes extending radially inwardly therefrom, an inner shroud radially adjacent the inner end of the airfoil vanes and cooperatively disposed relative to the outer shroud to provide an annular fluid flow path, an inner and an outer support ring respectively arranged radially inside the inner shroud and axially adjacent a portion of the outer shroud, and pins extending through such portion and into the outer support ring. The inner support ring or inner shroud has a groove therein bounded by end walls for receiving and being axially abuttable with a locating projection from the adjacent airfoil vane, inner shroud, or inner support ring. The nozzle outer structure may comprise segments each of which has a single protrusion which is axially engageable with the outer support ring or, alternatively, a first and second protrusion which are arcuately and axially separated and which include axial openings therein whereby first and second protrusions on respective, arcuately adjacent nozzle segments have axial openings therein which are alignable with connector openings in the outer support ring and within each of such aligned openings a pin is receivable. The inner shroud may, likewise, comprise segments which, when assembled in operating configuration, have a 360 degree expanse. 6 figs.

  14. Modal Dynamics of Large Wind Turbines with Different Support Structures

    SciTech Connect (OSTI)

    Bir, G.; Jonkman, J.

    2008-07-01T23:59:59.000Z

    This paper presents modal dynamics of floating-platform-supported and monopile-supported offshore wind turbines.

  15. Self-Supporting Budget Budget to Actual Comparison

    E-Print Network [OSTI]

    Hemmers, Oliver

    Self-Supporting Budget Budget to Actual Comparison System Administration University of Nevada Supporting Budgets Budget to Actual Comparison Introduction

  16. Project Management Support and Services for the Environmental Restoration and Waste Management. Final report

    SciTech Connect (OSTI)

    NONE

    1995-04-10T23:59:59.000Z

    The Los Alamos National Laboratory (LANL) Environmental Restoration Technical Support Office (ERTSO) contracted Project Time & Cost, Inc. (PT&C) on 16 November 1992 to provide support services to the US Department of Energy (DOE). ERTSO had traditionally supported the DOE Albuquerque office in the Environmental Restoration and Waste Management Programs and had also supported the Office of Waste Management (EM-30) at DOE Headquarters in Germantown, Maryland. PT&C was requested to provide project management and support services for the DOE as well as liaison and coordination of responses and efforts between various agencies. The primary objective of this work was to continue LANL`s technical support role to EM-30 and assist in the development of the COE Cost and Schedule Estimating (CASE) Guide for EM-30. PT&C`s objectives, as specified in Section B of the contract, were well met during the duration of the project through the review and comment of various draft documents, trips to DOE sites providing program management support and participating in the training for the EM-30 Cost and Schedule Estimating Guide, drafting memos and scheduling future projects, attending numerous meetings with LANL, DOE and other subcontractors, and providing written observations and recommendations.he results obtained were determined to be satisfactory by both the LANL ERTSO and DOE EM-30 organizations. The objective to further the support from LANL and their associated subcontractor (PT&C) was met. The contract concluded with no outstanding issues.

  17. Federal Utility Partnership Working Group Participants

    Broader source: Energy.gov [DOE]

    The following Federal agencies have participated in the Federal Utility Partnership Working Group or engaged in a utility energy service contract project.

  18. How Fuel Cells Work | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    30 likes How Fuel Cells Work Fuel cells produce electrical power without any combustion and operate on fuels like hydrogen, natural gas and propane. This clean energy technology...

  19. How Fusion Energy Works | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Fuel Cells Work 30 likes Fuel cells produce electrical power without any combustion and can provide power for virtually any application -- from cars and buses to commercial...

  20. Mobile machine hazardous working zone warning system

    DOE Patents [OSTI]

    Schiffbauer, W.H.; Ganoe, C.W.

    1999-08-17T23:59:59.000Z

    A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine. 3 figs.

  1. Climate VISION: Private Sector Initiatives: Semiconductors: Work...

    Office of Scientific and Technical Information (OSTI)

    of EPA. The plan describes actions the industry intends to take to achieve its Climate VISION goal by 2010. Read the Semiconductor Industry Association Work Plan (PDF 94...

  2. Draft Work Plan Environmental Assessment and Characterization

    E-Print Network [OSTI]

    Institute Site Flood Plain Area Golden, Colorado Prepared by S.M. Stoller Corporation, 2010 WORK PLAN APPROVALS Date: January 8, 2010 Radiation Safety Officer (RSO) Project

  3. Mobile machine hazardous working zone warning system

    DOE Patents [OSTI]

    Schiffbauer, William H. (Connellsville, PA); Ganoe, Carl W. (Pittsburgh, PA)

    1999-01-01T23:59:59.000Z

    A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation thereof. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine.

  4. Better Buildings Neighborhood Program Working with Utilities...

    Broader source: Energy.gov (indexed) [DOE]

    August 2, 2012 Better Buildings Neighborhood Program Working with Utilities Peer Exchange Call: Effective Strategies for Participating in Utility Planning Call Slides and...

  5. Federal Utility Partnership Working Group Industry Commitment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industry Commitment Federal Utility Partnership Working Group Industry Commitment Investor-owned electric utility industry members of the Edison Electric Institute pledge to assist...

  6. REGULATORY COOPERATION COUNCIL - WORK PLANNING FORMAT: Natural...

    Energy Savers [EERE]

    FORMAT: Natural Gas Use in Transportation REGULATORY COOPERATION COUNCIL - WORK PLANNING FORMAT: Natural Gas Use in Transportation RCC Workplan NGV.PDF More Documents &...

  7. Heat Exchanger Support Bracket Design Calculations

    SciTech Connect (OSTI)

    Rucinski, Russ; /Fermilab

    1995-01-12T23:59:59.000Z

    This engineering note documents the design of the heat exchanger support brackets. The heat exchanger is roughly 40 feet long, 22 inches in diameter and weighs 6750 pounds. It will be mounted on two identical support brackets that are anchored to a concrete wall. The design calculations were done for one bracket supporting the full weight of the heat exchanger, rounded up to 6800 pounds. The design follows the American Institute of Steel Construction (AISC) Manual of steel construction, Eighth edition. All calculated stresses and loads on welds were below allowables.

  8. 2014.12-Web of ScienceRefWorks [] RefWorks

    E-Print Network [OSTI]

    Miyashita, Yasushi

    2014.12- Web of ScienceRefWorks [] 1 RefWorks Web of Science CORE COLLECTION [] TEL: 03-5841-2649:22649 : literacy@lib.u-tokyo.ac.jp Web of Science RefWorks UTokyo Article Link p. 3-4 p. 5 p. 3 p. 6 RefWorks p. 6 Web of Science

  9. Working for a healthier tomorrow: a Review of the health of Britain's working age population

    E-Print Network [OSTI]

    Mumby, Peter J.

    of her clinical work sprang a research interest in Systemic Sclerosis, a disorder for which little couldWorking for a healthier tomorrow: a Review of the health of Britain's working age population University followed by a diploma in medical social work. She entered medical school as a mature student

  10. Distributed Cactus Stacks: Runtime Stack-Sharing Support for Distributed Parallel Programs1

    E-Print Network [OSTI]

    Dasgupta, Partha

    a shared memory machine. This approach is supposedly more natural than the message passing method used- tolerance and load balancing [Sar97, Das97]. 2. Related Work Shared memory parallel processingDistributed Cactus Stacks: Runtime Stack-Sharing Support for Distributed Parallel Programs1 1

  11. Supporting Information: A facile process for soak-and-peel delamination of CVD graphene from

    E-Print Network [OSTI]

    Deshmukh, Mandar M.

    Supporting Information: A facile process for soak-and-peel delamination of CVD graphene from equally to this work. 1 #12;I. CVD growth of graphene (a) Continuous graphene layer growth Continuous lms of CVD graphene were grown on 1 cm 1 cm sized Cu and Pt substrates. Cu foils (Alfa Aesar, 25 m thick

  12. Budget FY 1995 site support program plan WBS 6.10.1

    SciTech Connect (OSTI)

    Wemhoff, G.M.

    1994-09-01T23:59:59.000Z

    This is the program plan of Budget for the fiscal year 1995 site support. The topics of the program plan include a general mission statement, the primary customers, major activities performed to deliver products and services, program priorities, goals and objectives, assumptions, issues and constraints, performance measures, work breakdown structure and responsibility assignment matrix, description of activities and milestone list.

  13. Abstract--In the Structuring Nanotechnology Knowledge project, a material-independent platform for supporting

    E-Print Network [OSTI]

    Mizoguchi, Riichiro

    New Energy and Industrial Technology Development Organization) funded national project [1], has been-materials and Products". It is neither a database, nor a set of simulation tools nor a knowledge base received December 31, 2006. This work was supported in part by the Japanese New Energy and Industrial

  14. CLEI2005 Cali, Colombia Articulos CLI 195 An Architectural Model to Support

    E-Print Network [OSTI]

    Guerrero, Luis

    CLEI2005 Cali, Colombia Articulos CLI 195 An Architectural Model to Support Collaborative Work, Colombia ccollazo@unicauca.edu.co Rosa Alarcn Department of Computer Science, Pontificia Universidad Cali, Colombia Articulos CLI 196 2 On the other hand, information technology (IT) devices are becoming

  15. Supporting Knowledge Reuse: A Field Study of Service Engineers in a High-Reliability Organization

    E-Print Network [OSTI]

    Lutters, Wayne G.

    Supporting Knowledge Reuse: A Field Study of Service Engineers in a High-Reliability Organization, lutters@ics.uci.edu Abstract This dissertation examines knowledge work in a high- reliability organization. Specifically, it explores the distributed problem solving behavior of service engineers, and their analytic

  16. The Research Training Group 1493 "Mathematical Struc-tures in Modern Quantum Physics" supports doctoral stu-

    E-Print Network [OSTI]

    Wardetzky, Max

    Preface The Research Training Group 1493 "Mathematical Struc- tures in Modern Quantum Physics that govern fundamental physical processes ranging from the genesis of particles in modern accelerators" supports doctoral stu- dents and young postdoctoral researchers who work on mathematical and physical

  17. HPJava: Programming Support for High-Performance Grid-Enabled Applications

    E-Print Network [OSTI]

    ]. In comparison with HPF, HPJava has a stronger emphasis on the role of libraries that oper- ate on distributed the features of HPJava, including run-time communication library, compilation strategies, and optimization language (which 1This work was supported in part by the National Science Foundation Division of Advanced

  18. VBI-Tree: A Peer-to-Peer Framework for Supporting Multi-Dimensional Indexing Schemes

    E-Print Network [OSTI]

    Ooi, Beng Chin

    University, China Abstract Multi-dimensional data indexing has received much at- tention in a centralized database. However, not so much work has been done on this topic in the context of Peer- to-Peer systems support extensible centralized mapping meth- ods and query processing based on a variety of multi

  19. Requirements for a MDE System to Support Collaborative In-Car Communication Diagnostics

    E-Print Network [OSTI]

    Isenberg, Petra

    Sedlmair BMW Group Research and Technology Munich, Germany michael.sedlmair@bmw.de Dominikus Baur Media processes. In this paper, we present results of our studies on current working behaviour and environments and software support in single user environments, co-located collaborative environments lack specific software

  20. NERSC Supports 2013's Top Breakthroughs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    supported by NERSC is being honored by end-of-year reviews in two leading magazines: Physics World and WIRED. The IceCube South Pole Neutrino Observatory was notably named to...

  1. Shared Control Multiprocessors A Paradigm for Supporting

    E-Print Network [OSTI]

    Wilsey, Philip A.

    control architectures. This model, called shared control, overcomes the inefficiency of SIMD machinesShared Control Multiprocessors ­ A Paradigm for Supporting Control Parallelism on SIMD Abstract Parallel architectures are commonly classified according to their control organization as either

  2. Webinar: Supporting a Hawaii Hydrogen Economy

    Broader source: Energy.gov [DOE]

    The Energy Department will present a live webinar titled "Supporting a Hawaii Hydrogen Economy" on Tuesday, July 29, from 3:00 p.m. to 4:00 p.m. Eastern Daylight Time (EDT). The webinar will...

  3. Headquarters Training Supports EM Field Sites

    Broader source: Energy.gov [DOE]

    GERMANTOWN, Md. EMs Office of Safety, Security and Quality Programs sponsored training for headquarters staff for nine days this month to help them better support the Cold War programs cleanup sites around the complex.

  4. Low thermal expansion seal ring support

    DOE Patents [OSTI]

    Dewis, David W. (San Diego, CA); Glezer, Boris (Del Mar, CA)

    2000-01-01T23:59:59.000Z

    Today, the trend is to increase the temperature of operation of gas turbine engines. To cool the components with compressor discharge air, robs air which could otherwise be used for combustion and creates a less efficient gas turbine engine. The present low thermal expansion sealing ring support system reduces the quantity of cooling air required while maintaining life and longevity of the components. Additionally, the low thermal expansion sealing ring reduces the clearance "C","C'" demanded between the interface between the sealing surface and the tip of the plurality of turbine blades. The sealing ring is supported by a plurality of support members in a manner in which the sealing ring and the plurality of support members independently expand and contract relative to each other and to other gas turbine engine components.

  5. Support graph preconditioners for sparse linear systems

    E-Print Network [OSTI]

    Gupta, Radhika

    2005-02-17T23:59:59.000Z

    . In this thesis, we develop support graph preconditioners for symmetric positive de?nite matrices that arise from the ?nite element discretization of elliptic partial di?erential equations. An object oriented code is developed for the construction, integration...

  6. Supported Ionic Liquid Membranes for Gas Separation

    SciTech Connect (OSTI)

    Myers, C.R.; Ilconich, J.B.; Pennline, H.W.; Luebke, D.R.

    2007-08-01T23:59:59.000Z

    Ionic liquids have been rapidly gaining attention for various applications including solvent separation and gas capture. These substances are noted for extremely low vapor pressure and high CO2 solubility making them ideal as transport or capture media for CO2 abatement in power generation applications. Ionic liquids, combined with various supports to form membranes, have been proven selective in CO2 separation. Several ionic liquids and a variety of polymer supports have been studied over a temperature range from 37C to 300C and have been optimized for stability. The membranes have demonstrated high permeability and high selectivity since the supported ionic liquid membranes incorporate functionality capable of chemically complexing CO2. A study aimed at improving supported ionic liquid membranes will examine their durability with greater transmembrane pressures and the effects on CO2 permeance, CO2/H2 selectivity and thermal stability.

  7. Supporting Heuristic Evaluation for the Web

    E-Print Network [OSTI]

    Flores Mendoza, Ana

    2010-01-14T23:59:59.000Z

    Web developers are confronted with evaluating the usability of Web interfaces. Automatic Web usability evaluation tools are available, but they are limited in the types of problems they can handle. Tool support for manual usability evaluation...

  8. List of Contractors to Support Anthrax Remediation

    SciTech Connect (OSTI)

    Judd, Kathleen S.; Lesperance, Ann M.

    2010-05-14T23:59:59.000Z

    This document responds to a need identified by private sector businesses for information on contractors that may be qualified to support building remediation efforts following a wide-area anthrax release.

  9. Social network support for data delivery infrastructures

    E-Print Network [OSTI]

    Sastry, Nishanth Ramakrishna

    2011-10-11T23:59:59.000Z

    in social networks can be used to tailor content staging decisions to the user base and thereby build better data delivery infrastructures. This claim is supported by two case studies, which apply social information in challenging situations where...

  10. Financing Program Support for ARRA Recipients

    Broader source: Energy.gov (indexed) [DOE]

    Hawaii PACE Webinar N b 18 2009 Financing Program Support November 18, 2009 f for ARRA R ARRA Reci ipi ient ts Speakers Cisco DeVries, Renewable Funding LLC Mike Martin, San...

  11. Phase Selectively Soluble Polystyrene-Supported Organocatalysts

    E-Print Network [OSTI]

    Khamatnurova, Tatyana

    2014-08-10T23:59:59.000Z

    biphasic separation that avoids a solvent-intensive precipitation process. Coupling of a 4-dimethylaminopyridine (DMAP) analog, Cinchona alkaloid derivative or phosphine-ligated metal catalyst to the poly(4-alkylstyrene) supports was used to prepare...

  12. INFORMATION SYSTEMS SUPPORT FOR MANUFACTURING PROCESSES

    E-Print Network [OSTI]

    activities. The feature overlapping of production planning and quality control between both systems raises and distribution (Merrit1999) and have extend their scope to support quality control and production tracking: Manufacturing Enterprises, Enterprise Resource Planning, Manufacturing Execution Systems, Discrete Processes

  13. Future characteristics of Offshore Support Vessels

    E-Print Network [OSTI]

    Rose, Robin Sebastian Koske

    2011-01-01T23:59:59.000Z

    The objective of this thesis is to examine trends in Offshore Support Vessel (OSV) design and determine the future characteristics of OSVs based on industry insight and supply chain models. Specifically, this thesis focuses ...

  14. Overweight permit formulas for simply supported bridges

    E-Print Network [OSTI]

    Mattox, Michael Joseph

    1992-01-01T23:59:59.000Z

    OVERBRIGHT PERMIT FORMULAS POR SIMPLY SUPPORTED BRIDGES A Thesis by MICHAEL JOSEPH MATTOX Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... December 1992 Major Subject: Civil Engineering OVERWEIGHT PERMIT FORMULAS POR SIMPLY SUPPORTED BRIDGES A Thesis by MICHAEL JOSEPH MATTOX Approved as to style and content by; James S. Noel (Chair of Committee) Walter E. Haisler (Member) rry L...

  15. NZER WORKING PAPER SERIES BOLIVIA'S ECONOMIC CRISIS

    E-Print Network [OSTI]

    NZER WORKING PAPER SERIES BOLIVIA'S ECONOMIC CRISIS Juan Antonio Morales Jeffrey Sachs Working Paper No. 2620 NATIONAL BUREAU OF ECONOMIC RESEARCH 1050 Massachusetts Avenue Cambridge, MA 02138 of a monograph on "Bolivian Economic Performance and Foreign Debt", undertaken as part of the NBER project

  16. From Higher Education To Work In West

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    From Higher Education To Work In West Virginia 2008 Summary Results For Work Participation Achievement, Tuition Assistance, and Nearby States March 2010 Prepared for the West Virginia Higher Education Higher Education Policy Commission. Opinions expressed herein are the responsibility of the authors. #12

  17. From Higher Education To Work In West

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    From Higher Education To Work In West Virginia 2007 Summary Results For Work Participation Prepared for the West Virginia Higher Education Policy Commission By George W. Hammond, Associate Director This research was conducted under contract with the West Virginia Higher Education Policy Commission. Opinions

  18. Fusion Technology Working Group Presented by

    E-Print Network [OSTI]

    Abdou, Mohamed

    Snowmass Fusion Technology Working Group Summary Presented by M. Abdou, S. Milora Snowmass July 23, 1999 #12;Technology Working Group Subgroup # 1 Subgroup # 2 Solid Walls Ulrickson / Mattas Liquid Walls / Ying Chamber Technology Abdou / Ulrickson Heating/CD/Fueling Swain / Temkin Magnets Schultz / Woolley

  19. How Minds Work Memories and Learning

    E-Print Network [OSTI]

    Memphis, University of

    & Learning 7 Types of Human Learning Requiring Distinct Mechanisms Perceptual learning Identify1 How Minds Work Memories and Learning Stan Franklin Computer Science Division & Institute for Intelligent Systems The University of Memphis #12;How Minds Work: Memory & Learning 2 Human Learning

  20. Informal Assessment Work Group Meeting Notes

    E-Print Network [OSTI]

    O'Laughlin, Jay

    Informal Assessment Work Group Meeting Notes November 15, 2006 Present: Rula Awwad-Rafferty, Doug Baker, Dick Battaglia, Ben Beard, Suzi Billington, Alton Campbell, Jeanne Christiansen, Gail Eckwright is completed for all programs by May 2007? (Can we do the level of work needed in this time period?) Doug

  1. Using the Web for Name Authority Work

    E-Print Network [OSTI]

    Whittaker, Beth M.; Spillane, Jodi Lynn

    2001-01-01T23:59:59.000Z

    While many catalogers are using the Web to find the information they need to perform authority work quickly and accurately, the full potential of the Web to assist catalogers in name authority work has yet to be realized. The ever-growing nature...

  2. Earnings inequality and in-work-poverty

    E-Print Network [OSTI]

    Gutirrez Palacios, Rodolfo; Guilln Rodrguez, Ana Marta; Pea-Casas, Ramn

    2009-01-01T23:59:59.000Z

    . The first deals with our level of knowledge about the impact of economic globalization on earnings inequalities. Sections 2 and 3 are devoted to the dynamics and present situation of the incidence of low paid work and in-work poverty respectively. Section 4...

  3. RISK ASSESSMENT FORM FIELD / LOCATION WORK

    E-Print Network [OSTI]

    Lummaa, Virpi

    the work. Detail such risks in the final section. ENVIRONMENT The environment always represents a safety weather, illness, hypothermia, assault, getting lost. Is the risk high/medium/low? CONTROL MEASURES environment trained leaders accompany the trip refuge is available work in outside organisations is subject

  4. Working Copy Specification E-I-474

    E-Print Network [OSTI]

    Working Copy Specification E-I-474 Revision Number 0 Revision Date 07/30/07 ECO Number 11818.7 Packaging and Shipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3.8 Final #12;Working Copy E-I-474, Rev. 0 SPECIFICATION E-X-XXX RECORD OF REVISION ECO/REV NUMBER DATE PAGES

  5. Caringscapes: experiences of caring and working

    E-Print Network [OSTI]

    McKie, Linda; Gregory, Susan; Bowlby, Sophie

    There is growing interest in ways in which people combine working with caring, and what can be done to make the balance of work and care more manageable. In this paper, Linda McKie, Susan Gregory and Sophia Bowlby explore experiences of caring...

  6. Toolbox Safety Talk Articulating Boom Work Platforms

    E-Print Network [OSTI]

    Pawlowski, Wojtek

    Toolbox Safety Talk Articulating Boom Work Platforms Environmental Health & Safety Facilities sign-in sheet to Environmental Health & Safety for recordkeeping. Articulating boom work platforms platforms and provides tips to prevent injuries, death, and equipment damage. More information can be found

  7. Second Proof Work, Power, and Energy

    E-Print Network [OSTI]

    Kostic, Milivoje M.

    ) energy sources, such as solar energy, wind, water flows, ocean and tidal waves, and biomassSecond Proof Work, Power, and Energy M. KOSTIC Northern Illinois University DeKalb, Illinois, United States 1. Basic Concepts 2. Forms, Classifications, and Conservation of Energy 3. Work

  8. Multi-language Struct Support in Babel

    SciTech Connect (OSTI)

    Ebner, D; Prantl, A; Epperly, T W

    2011-03-22T23:59:59.000Z

    Babel is an open-source language interoperability framework tailored to the needs of high-performance scientific computing. As an integral element of the Common Component Architecture (CCA) it is used in a wide range of research projects. In this paper we describe how we extended Babel to support interoperable tuple data types (structs). Structs are a common idiom in scientific APIs; they are an efficient way to pass tuples of nonuniform data between functions, and are supported natively by most programming languages. Using our extended version of Babel, developers of scientific code can now pass structs as arguments between functions implemented in any of the supported languages. In C, C++ and Fortran 2003, structs can be passed without the overhead of data marshaling or copying, providing language interoperability at minimal cost. Other supported languages are Fortran 77, Fortran 90, Java and Python. We will show how we designed a struct implementation that is interoperable with all of the supported languages and present benchmark data compare the performance of all language bindings, highlighting the differences between languages that offer native struct support and an object-oriented interface with getter/setter methods.

  9. Hanford tanks initiative work plan -- subsurface characterization to support the closure-readiness demonstration for tank 241-AX-104

    SciTech Connect (OSTI)

    Barnett, D.B.

    1996-09-27T23:59:59.000Z

    This document presents a plan for subsurface investigation near 241-AX-104 Single-Shell tank. Objectives of the investigation are soil sampling and analyses (physical and chemical), local stratigraphic correlation, groundwater background characterization, and geophysical surveys. The primary purpose of the investigation is to supply physical and hydraulic properties for numerical modeling of vadose zone flow and transport.

  10. Predictions By Energy Analysis This work was supported by the National Science Foundation's REU program under grant number

    E-Print Network [OSTI]

    Collins, Gary S.

    the smart environment, a power meter has been added to the environment. By combining the power readings program under grant number: ISS-0647705 Introduction Furthering research in the smart environment relies in the smart environment over a period of three months, sensor events were collected. Every six seconds

  11. An empirical study of the relations between leadership, social support networks, task autonomy and emotions in a technical work environment

    E-Print Network [OSTI]

    Wickliff, Tanya Verniece Dugat

    2006-04-12T23:59:59.000Z

    The world in which we live is hyper-dynamic with multiple inputs, outputs and expectations. As it relates to the fast pace of corporate America, customers want products and services within a tighter market window, with no ...

  12. IEEE Communications Magazine February 2009134 0163-6804/09/$25.00 2009 IEEE This work is supported in

    E-Print Network [OSTI]

    , Polytechnic Angel funds, the New York State Cen- ter for Advanced Technol- ogy in Telecommunications (CATT by opportunistically redistributing network resources such as energy and bandwidth. Incor- porating the notion about performance in terms of throughput, delay, or power consumption. How- ever, to have analytically

  13. AIAA-99-0024 This work was supported by the U.S. Department of energy and the

    E-Print Network [OSTI]

    National Laboratories under Subcontract AN0412. SELECTION OF REINFORCING FABRICS FOR WIND TURBINE BLADES and fatigue properties of typical wind turbine part of the DOE/MSU fatigue database [1] has led to blade of reinforcing fabrics for wind turbine content, such as 35-40% fibers by volume may show poor blades has

  14. IEEE Wireless Communications February 201490 1536-1284/14/$25.00 2014 IEEE This work was supported

    E-Print Network [OSTI]

    Ansari, Nirwan

    /convkp/kpeng.pdf. 2 Technology roadmap for solar photovoltaic energy is available at http://www.iea.org/publica- tions a necessity to bolster social, environmental, and economic sustainability. Owing to the direct impact (PV) solar panel is predicted to be tripled by 2030, and the cost of per watt generated by the PV

  15. IEEE Communications Magazine May 200750 0163-6804/07/$20.00 2007 IEEE This work was supported

    E-Print Network [OSTI]

    Reisslein, Martin

    -definition television, multimedia/ multiparty online gaming, telemedicine, telecom- muting, and surveillance, to get, colorless ONUs, and WDM PONs. We then lift the veil of future WDM EPONs, and elaborate on evolutionary cost

  16. Results Conclusions & Future Work TRADEOFF ANALYSIS OF Design of a Green Campus Motor Fleet Decision Support System

    E-Print Network [OSTI]

    Greenhouse Gas (GHG) emissions from owned or leased vehicles by 12.3% by 2020 compared to a FY 2008 baseline (NAS) - Resources include more than 48,000 employees and a 2013 budget of $15.2 billion Mission: Our fueled by December 31 2015, Hybrid, electric, compre

  17. J. Phys. Chem. 1988, 92, 5213-5221 5213 Acknowledgment. This work was Supported by the Department

    E-Print Network [OSTI]

    Goodman, Wayne

    of ethyl thiolate with respect to C-S bond cleavage. Low-temperature C-S bond cleavage at low ex- posure ultimately results in nonselective decomposition to surface carbon and sulfur. At high coverage as a function of temperature and partial pressure of O2and CO in a high-pressurereactor-ultra

  18. Detailed modeling of spectroscopic data: Modeling support for ORNL PMI WORK: TEXTORALT-II, TORE SUPRA, ATF

    SciTech Connect (OSTI)

    Hogan, J.; Klepper, C.; Hillis, D.; Uckan, T.

    1988-01-01T23:59:59.000Z

    This paper contains vugraphs on particle source effects on confinement time scaling. Detailed modeling of H/sub ..cap alpha../ intensity spatial distribution is discussed. (LSP)

  19. Work supported by the Department of Energy, UCLA and UCOP. LAPTAG, Encouraging High School students to Consider Physics Related

    E-Print Network [OSTI]

    California at Los Angles, University of

    ://coke.physics.ucla.edu/laptag and web service is provided to schools without servers or Internet access. LAPTAG encourages communication experiment in which ten schools received seismometers. LAPTAG provided a Web based astronomy class in which

  20. Overhead Piping and Support Removal. Subcontractor is Hemphill Contracting Company. Subcontract work package number 3589-SC-WP017

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling7 AugustAFRICAN .METALS~ c3ppY-.I ' Y{OoEr' $1 ;-