Sample records for rita damaged set

  1. EXAMPLES OF DAMAGE DETECTION IN REAL-LIFE SETTINGS BASED ON THE POSITION OF THE NEUTRAL AXIS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    EXAMPLES OF DAMAGE DETECTION IN REAL-LIFE SETTINGS BASED ON THE POSITION OF THE NEUTRAL AXIS discussed in this paper is to create damage detection methods based on universal parameters an appropriate parameter and validate that it can be used to detect damage in real-life settings. The centroid

  2. Rita M. Clinton | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic2 OPAM615_CostNSAR -DepartmentRetail DemandEnergyRisk Management ReviewRita

  3. A Green Prison: The Santa Rita Jail Campus Microgrid

    E-Print Network [OSTI]

    Marnay, Chris

    2013-01-01T23:59:59.000Z

    USA This work described in this paper was funded by the Office of ElectricityU.S.A. (e-mail: JLai@LBL.gov). Santa Rita Jail currently purchases its electricity

  4. Lightning and radar observations of hurricane Rita landfall

    SciTech Connect (OSTI)

    Henderson, Bradley G [Los Alamos National Laboratory; Suszcynsky, David M [Los Alamos National Laboratory; Hamlin, Timothy E [Los Alamos National Laboratory; Jeffery, C A [Los Alamos National Laboratory; Wiens, Kyle C [TEXAS TECH U.; Orville, R E [TEXAS A& M

    2009-01-01T23:59:59.000Z

    Los Alamos National Laboratory (LANL) owns and operates an array of Very-Low Frequency (VLF) sensors that measure the Radio-Frequency (RF) waveforms emitted by Cloud-to-Ground (CG) and InCloud (IC) lightning. This array, the Los Alamos Sferic Array (LASA), has approximately 15 sensors concentrated in the Great Plains and Florida, which detect electric field changes in a bandwidth from 200 Hz to 500 kHz (Smith et al., 2002). Recently, LANL has begun development of a new dual-band RF sensor array that includes the Very-High Frequency (VHF) band as well as the VLF. Whereas VLF lightning emissions can be used to deduce physical parameters such as lightning type and peak current, VHF emissions can be used to perform precise 3d mapping of individual radiation sources, which can number in the thousands for a typical CG flash. These new dual-band sensors will be used to monitor lightning activity in hurricanes in an effort to better predict intensification cycles. Although the new LANL dual-band array is not yet operational, we have begun initial work utilizing both VLF and VHF lightning data to monitor hurricane evolution. In this paper, we present the temporal evolution of Rita's landfall using VLF and VHF lightning data, and also WSR-88D radar. At landfall, Rita's northern eyewall experienced strong updrafts and significant lightning activity that appear to mark a transition between oceanic hurricane dynamics and continental thunderstorm dynamics. In section 2, we give a brief overview of Hurricane Rita, including its development as a hurricane and its lightning history. In the following section, we present WSR-88D data of Rita's landfall, including reflectivity images and temporal variation. In section 4, we present both VHF and VLF lightning data, overplotted on radar reflectivity images. Finally, we discuss our observations, including a comparison to previous studies and a brief conclusion.

  5. Rita Blanca Electric Coop, Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with form HistoryRistma AG Jump to: navigation, search Name: Ristma AG Place:Rita

  6. A Green Prison: The Santa Rita Jail Campus Microgrid

    SciTech Connect (OSTI)

    Marnay, Chris; DeForest, Nicholas; Lai, Judy

    2012-01-22T23:59:59.000Z

    A large microgrid project is nearing completion at Alameda County’s twenty-two-year-old 45 ha 4,000-inmate Santa Rita Jail, about 70 km east of San Francisco. Often described as a green prison, it has a considerable installed base of distributed energy resources (DER) including an eight-year old 1.2 MW PV array, a five-year old 1 MW fuel cell with heat recovery, and considerable efficiency investments. A current US$14 M expansion adds a 2 MW-4 MWh Li-ion battery, a static disconnect switch, and various controls upgrades. During grid blackouts, or when conditions favor it, the Jail can now disconnect from the grid and operate as an island, using the on-site resources described together with its back-up diesel generators. In other words, the Santa Rita Jail is a true microgrid, or ?grid, because it fills both requirements, i.e. it is a locally controlled system, and it can operate both grid connected and islanded. The battery’s electronics includes Consortium for Electric Reliability Technology (CERTS) Microgrid technology. This enables the battery to maintain energy balance using droops without need for a fast control system.

  7. Integration& Operation of a Microgrid at Santa Rita Jail

    SciTech Connect (OSTI)

    Chevron Energy Solutions; Alameda County; DeForest, Nicholas; Lai, Judy; Stadler, Michael; Mendes, Goncalo; Marnay, Chris; Donadee, Jon

    2011-05-01T23:59:59.000Z

    Santa Rita Jail is a 4,500 inmate facility located in Dublin CA, approximately 40 miles (65 km) east of San Francisco. Over the past decade, a series of Distributed Energy Resources (DER) installations and efficiency measures have been undertaken to transform the 3MW facility into a"Green Jail". These include a 1.2MW rated rooftop PV system installed in 2002, a 1MW molten carbonate fuel cell with CHP, and retrofits to lighting and HVAC systems to reduce peak loads. With the upcoming installation of a large-scale battery and fast static disconnect switch, Santa Rita Jail will become a true microgrid, with full CERTS Microgrid functionality. Consequently, the jail will be able to seamlessly disconnect from the grid and operate as an island in the event of a disturbance, reconnecting again once the disturbance has dissipated. The extent to which that jail is capable of islanding is principally dependant on the energy capacity of the battery-one focus of this investigation. Also presented here are overviews of the DER currently installed at the jail, as well as the value it provides by offsetting the purchase of electricity under the current Pacific Gas& Electric (PG&E) tariff.

  8. Near-Inertial Wave Wake of Hurricanes Katrina and Rita over Mesoscale Oceanic Eddies

    E-Print Network [OSTI]

    Miami, University of

    Near-Inertial Wave Wake of Hurricanes Katrina and Rita over Mesoscale Oceanic Eddies BENJAMIN; Jaimes and Shay 2009, hereafter JS09). These robust mesoscale oceanic features are present at any time (Jaimes 2009). This mesoscale ocean variability imposed important dynamical constraints on the OML

  9. Mixed Layer Cooling in Mesoscale Oceanic Eddies during Hurricanes Katrina and Rita

    E-Print Network [OSTI]

    Miami, University of

    Mixed Layer Cooling in Mesoscale Oceanic Eddies during Hurricanes Katrina and Rita BENJAMIN JAIMES. Introduction Isotherm topography and energetic geostrophic flow in mesoscale oceanic features in the Gulf. 2000; Shay et al. 2000). The dependence of hurricane-induced OML cooling on the presence of mesoscale

  10. Effects of Hurricanes Katrina and Rita on the Chemistry of Bottom Sediments in Lake Pontchartrain, La.

    E-Print Network [OSTI]

    Effects of Hurricanes Katrina and Rita on the Chemistry of Bottom Sediments in Lake Pontchartrain, gasoline stations, automobiles, industrial facilities, commercial buildings and houses, and historically was to characterize the effect of the discharge of flood waters from New Orleans on the sediment chemistry of Lake

  11. A study of seed set variation in dallisgrass as related to experimental procedure, insect damage and genetic sources

    E-Print Network [OSTI]

    Johnson, Billy Jack

    1961-01-01T23:59:59.000Z

    strain. Carpenter (11), over a two year period of making crosses in the greenhouse and using cellophane bags to collect pollen, suggests that cello- pbans bags rsduss seed set I ~F+ alum speeds s. Carpenter (11) germi ted ~Fas alma gttstat mm seed... checked for moisture C reenter (11) ln eae d ger 1. ar'oo of ~fae alum dllatatum by using a 12 hour day length and a previous cold treatment. A rapid germination occured when the seed were kept at 25- 30 0 temperature following this treatment...

  12. Damage susceptibility tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    conditions, 3) that x-ray induced damage rates for a common material (relatively pure PVC in this example 7,8 ) can be used to normalize different sets of XPS damage...

  13. Rising Above the Water: New Orleans Implements Energy Efficiency and Sustainability Practices Following Hurricanes Katrina and Rita (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-07-01T23:59:59.000Z

    This fact sheet describes the technical assistance that the U.S. Department of Energy, through its National Renewable Energy Laboratory, provided to New Orleans, Louisiana, which helped the city incorporate energy efficiency into its rebuilding efforts for K-12 schools and homes following Hurricanes Katrina and Rita. NREL also provided support and analysis on energy policy efforts.

  14. A Green Prison: Santa Rita Jail Creeps Towards Zero Net Energy (ZNE)

    SciTech Connect (OSTI)

    Marnay, Chris; DeForest, Nicholas; Stadler, Michael; Donadee, Jon; Dierckxsens, Carlos; Mendes, Goncalo; Lai, Judy; Cardoso, Goncalo Ferreira

    2011-03-18T23:59:59.000Z

    A large project is underway at Alameda County's twenty-year old 45 ha 4,000-inmate Santa Rita Jail, about 70 km east of San Francisco. Often described as a green prison, it has a considerable installed base of distributed energy resources including a seven-year old 1.2 MW PV array, a four-year old 1 MW fuel cell with heat recovery, and efficiency investments. A current US$14 M expansion will add approximately 2 MW of NaS batteries, and undetermined wind capacity and a concentrating solar thermal system. This ongoing effort by a progressive local government with considerable Federal and State support provides some excellent lessons for the struggle to lower building carbon footprint. The Distributed Energy Resources Customer Adoption Model (DER-CAM) finds true optimal combinations of equipment and operating schedules for microgrids that minimize energy bills and/or carbon emissions without 2 of 12 significant searching or rules-of-thumb prioritization, such as"efficiency first then on-site generation." The results often recommend complex systems, and sensitivities show how policy changes will affect choices. This paper reports an analysis of the historic performance of the PV system and fuel cell, describes the complex optimization applied to the battery scheduling, and shows how results will affect the jail's operational costs, energy consumption, and carbon footprint. DER-CAM is used to assess the existing and proposed DER equipment in its ability to reduce tariff charges.

  15. DAMAGE LOCALIZATION USING LOAD VECTORS Dionisio Bernal

    E-Print Network [OSTI]

    Bernal, Dionisio

    DAMAGE LOCALIZATION USING LOAD VECTORS Dionisio Bernal Associate Professor Department of Civil: A technique to localize damage in structures that can be treated as linear in the pre and post-damage state is presented. Central to the approach is the computation of a set of vectors, designated as Damage Locating

  16. A Damage-Revelation Rationale for Coupon Remedies

    E-Print Network [OSTI]

    Polinsky, A. Mitchell; Rubinfeld, Daniel L.

    2006-01-01T23:59:59.000Z

    Bargaining and the Design of Damage Awards,” 10 Journal ofpage 1 Revised: March 2006 A DAMAGE-REVELATION RATIONALE FORin a setting in which damages vary among plaintiffs and are

  17. Property Loss / Damage Report Damage Loss Details

    E-Print Network [OSTI]

    Ponce, V. Miguel

    Property Loss / Damage Report Damage Loss Details Date & Time of Damage / Loss: Type of damage / loss: Location - specific address / room: Project / Grant associated with damage / loss - grant Police: When was damage / loss first discovered - BY WHOM: Pictures available or attached? Was personal

  18. Environmental Stigma Damages: Speculative Damages in Environmental Tort Cases

    E-Print Network [OSTI]

    Johnson, E. Jean

    1997-01-01T23:59:59.000Z

    contami- nation causing environmental damage cannot be seen,Damages: Speculative Damages in Environmental Tort Cases E.in cases of environmental damage, primar- ily because it is

  19. System and damage identification of civil structures

    E-Print Network [OSTI]

    Moaveni, Babak

    2007-01-01T23:59:59.000Z

    12 Damage Index Methods. . . . . . . . . . . . . . . .Model Updating for Damage Identification . . . . . . . .298 x Damage Factors and Residual

  20. RADIATION DAMAGE OF GERMANIUM DETECTORS

    E-Print Network [OSTI]

    Pehl, Richard H.

    2011-01-01T23:59:59.000Z

    the high-energy proton damage than was the planar detector.as far as radiation damage is concerned. Unfortunately, some28-29, 1978 LBL-7967 RADIATION DAMAGE OF GERMANIUM DETECTORS

  1. Composite heat damage assessment

    SciTech Connect (OSTI)

    Janke, C.J.; Wachter, E.A. [Oak Ridge National Lab., TN (United States); Philpot, H.E. [Oak Ridge K-25 Site, TN (United States); Powell, G.L. [Oak Ridge Y-12 Plant, TN (United States)

    1993-12-31T23:59:59.000Z

    The effects of heat damage were determined on the residual mechanical, physical, and chemical properties of IM6/3501-6 laminates, and potential nondestructive techniques to detect and assess material heat damage were evaluated. About one thousand preconditioned specimens were exposed to elevated temperatures, then cooled to room temperature and tested in compression, flexure, interlaminar shear, shore-D hardness, weight loss, and change in thickness. Specimens experienced significant and irreversible reduction in their residual properties when exposed to temperatures exceeding the material upper service temperature of this material (350{degrees}F). The Diffuse Reflectance Infrared Fourier Transform and Laser-Pumped Fluorescence techniques were found to be capable of rapid, in-service, nondestructive detection and quantitation of heat damage in IM6/3501- 6. These techniques also have the potential applicability to detect and assess heat damage effects in other polymer matrix composites.

  2. Controlling Beaver Damage

    E-Print Network [OSTI]

    Texas Wildlife Services

    2007-03-13T23:59:59.000Z

    Beavers are important because their dams stabilize creek flow, slow runoff and create ponds. However, these same dams can negatively alter the flow of creeks. Damage prevention, control and various trapping methods are discussed in this publication....

  3. Controlling Opossum Damage

    E-Print Network [OSTI]

    Texas Wildlife Services

    2007-05-23T23:59:59.000Z

    damage; however, their pelts can be sold only during the furbearer season and with the proper licenses. Other furbearers include beaver, otter, mink, nutria, ringtailed cat, badger, skunk, weasel, raccoon, muskrat, fox and civet cat. Homeowners...

  4. A UNIFIED FAILURE/DAMAGE APPROACH TO BATTLE DAMAGE REGENERATION

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    A UNIFIED FAILURE/DAMAGE APPROACH TO BATTLE DAMAGE REGENERATION : APPLICATION TO GROUND MILITARY-availability. Military weapon systems availability can be affected by system failures or by damage to the system damage into account in their more general dependability studies. This paper takes a look at the issues

  5. Rita Franklin | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin ofEnergy at Waste-to-Energy usingofRetrofittingFundA l i c e L i p p e r t SRita

  6. Radiation damage evolution in ceramics. | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Radiation damage evolution in ceramics. Radiation damage evolution in ceramics. Abstract: A review is presented of recent results on radiation damage production, defect...

  7. Regulation with anticipated learning about environmental damages

    E-Print Network [OSTI]

    Karp, L; Zhang, J

    2006-01-01T23:59:59.000Z

    abatement costs and environmental damages, and a generalemissions. 2.2 Environmental damages and learning Let S t begas stocks and environmental damages. In some respects these

  8. Nowcasting Disaster Damage

    E-Print Network [OSTI]

    Kryvasheyeu, Yury; Obradovich, Nick; Moro, Esteban; Van Hentenryck, Pascal; Fowler, James; Cebrian, Manuel

    2015-01-01T23:59:59.000Z

    Could social media data aid in disaster response and damage assessment? Countries face both an increasing frequency and intensity of natural disasters due to climate change. And during such events, citizens are turning to social media platforms for disaster-related communication and information. Social media improves situational awareness, facilitates dissemination of emergency information, enables early warning systems, and helps coordinate relief efforts. Additionally, spatiotemporal distribution of disaster-related messages helps with real-time monitoring and assessment of the disaster itself. Here we present a multiscale analysis of Twitter activity before, during, and after Hurricane Sandy. We examine the online response of 50 metropolitan areas of the United States and find a strong relationship between proximity to Sandy's path and hurricane-related social media activity. We show that real and perceived threats -- together with the physical disaster effects -- are directly observable through the intens...

  9. Survey of four damage models for concrete.

    SciTech Connect (OSTI)

    Leelavanichkul, Seubpong (University of Utah, Salt Lake City, UT); Brannon, Rebecca Moss (University of Utah, Salt Lake City, UT)

    2009-08-01T23:59:59.000Z

    Four conventional damage plasticity models for concrete, the Karagozian and Case model (K&C), the Riedel-Hiermaier-Thoma model (RHT), the Brannon-Fossum model (BF1), and the Continuous Surface Cap Model (CSCM) are compared. The K&C and RHT models have been used in commercial finite element programs many years, whereas the BF1 and CSCM models are relatively new. All four models are essentially isotropic plasticity models for which 'plasticity' is regarded as any form of inelasticity. All of the models support nonlinear elasticity, but with different formulations. All four models employ three shear strength surfaces. The 'yield surface' bounds an evolving set of elastically obtainable stress states. The 'limit surface' bounds stress states that can be reached by any means (elastic or plastic). To model softening, it is recognized that some stress states might be reached once, but, because of irreversible damage, might not be achievable again. In other words, softening is the process of collapse of the limit surface, ultimately down to a final 'residual surface' for fully failed material. The four models being compared differ in their softening evolution equations, as well as in their equations used to degrade the elastic stiffness. For all four models, the strength surfaces are cast in stress space. For all four models, it is recognized that scale effects are important for softening, but the models differ significantly in their approaches. The K&C documentation, for example, mentions that a particular material parameter affecting the damage evolution rate must be set by the user according to the mesh size to preserve energy to failure. Similarly, the BF1 model presumes that all material parameters are set to values appropriate to the scale of the element, and automated assignment of scale-appropriate values is available only through an enhanced implementation of BF1 (called BFS) that regards scale effects to be coupled to statistical variability of material properties. The RHT model appears to similarly support optional uncertainty and automated settings for scale-dependent material parameters. The K&C, RHT, and CSCM models support rate dependence by allowing the strength to be a function of strain rate, whereas the BF1 model uses Duvaut-Lion viscoplasticity theory to give a smoother prediction of transient effects. During softening, all four models require a certain amount of strain to develop before allowing significant damage accumulation. For the K&C, RHT, and CSCM models, the strain-to-failure is tied to fracture energy release, whereas a similar effect is achieved indirectly in the BF1 model by a time-based criterion that is tied to crack propagation speed.

  10. Controlling Mole Damage

    E-Print Network [OSTI]

    Texas Wildlife Services

    2007-03-13T23:59:59.000Z

    the near- est office of Texas Cooperative Extension? WildlifeServices. Properly set harpoon trap. TCE? Texas AgriLife Wildlife Services P.. Box 100410 ? San Antonio, Texas 78201-1710 The information given herein is for educational purposes only. Reference...

  11. Shock Initiation of Damaged Explosives

    SciTech Connect (OSTI)

    Chidester, S K; Vandersall, K S; Tarver, C M

    2009-10-22T23:59:59.000Z

    Explosive and propellant charges are subjected to various mechanical and thermal insults that can increase their sensitivity over the course of their lifetimes. To quantify this effect, shock initiation experiments were performed on mechanically and thermally damaged LX-04 (85% HMX, 15% Viton by weight) and PBX 9502 (95% TATB, 5% Kel-F by weight) to obtain in-situ manganin pressure gauge data and run distances to detonation at various shock pressures. We report the behavior of the HMX-based explosive LX-04 that was damaged mechanically by applying a compressive load of 600 psi for 20,000 cycles, thus creating many small narrow cracks, or by cutting wedge shaped parts that were then loosely reassembled, thus creating a few large cracks. The thermally damaged LX-04 charges were heated to 190 C for long enough for the beta to delta solid - solid phase transition to occur, and then cooled to ambient temperature. Mechanically damaged LX-04 exhibited only slightly increased shock sensitivity, while thermally damaged LX-04 was much more shock sensitive. Similarly, the insensitive explosive PBX 9502 was mechanically damaged using the same two techniques. Since PBX 9502 does not undergo a solid - solid phase transition but does undergo irreversible or 'rachet' growth when thermally cycled, thermal damage to PBX 9502 was induced by this procedure. As for LX-04, the thermally damaged PBX 9502 demonstrated a greater shock sensitivity than mechanically damaged PBX 9502. The Ignition and Growth reactive flow model calculated the increased sensitivities by igniting more damaged LX-04 and PBX 9502 near the shock front based on the measured densities (porosities) of the damaged charges.

  12. Existence and Regularity for Dynamic Viscoelastic Adhesive Contact with Damage

    SciTech Connect (OSTI)

    Kuttler, Kenneth L. [Department of Mathematics, Brigham Young University, Provo, UT 84602 (United States)], E-mail: klkuttler@math.byu.edu; Shillor, Meir [Department of Mathematics and Statistics, Oakland University, Rochester, MI 48309 (United States)], E-mail: shillor@oakland.edu; Fernandez, Jose R. [Departamento de Matematica Aplicada, Facultade de Matematicas, University of Santiago de Compostela, 15706 Santiago de Compostela (Spain)], E-mail: jramon@usc.es

    2006-01-15T23:59:59.000Z

    A model for the dynamic process of frictionless adhesive contact between a viscoelastic body and a reactive foundation, which takes into account the damage of the material resulting from tension or compression, is presented. Contact is described by the normal compliance condition. Material damage is modelled by the damage field, which measures the pointwise fractional decrease in the load-carrying capacity of the material, and its evolution is described by a differential inclusion. The model allows for different damage rates caused by tension or compression. The adhesion is modelled by the bonding field, which measures the fraction of active bonds on the contact surface. The existence of the unique weak solution is established using the theory of set-valued pseudomonotone operators introduced by Kuttler and Shillor (1999). Additional regularity of the solution is obtained when the problem data is more regular and satisfies appropriate compatibility conditions.

  13. Electrical contact tool set station

    DOE Patents [OSTI]

    Byers, M.E.

    1988-02-22T23:59:59.000Z

    An apparatus is provided for the precise setting to zero of electrically conductive cutting tools used in the machining of work pieces. An electrically conductive cylindrical pin, tapered at one end to a small flat, rests in a vee-shaped channel in a base so that its longitudinal axis is parallel to the longitudinal axis of the machine's spindle. Electronic apparatus is connected between the cylindrical pin and the electrically conductive cutting tool to produce a detectable signal when contact between tool and pin is made. The axes of the machine are set to zero by contact between the cutting tool and the sides, end or top of the cylindrical pin. Upon contact, an electrical circuit is completed, and the detectable signal is produced. The tool can then be set to zero for that axis. Should the tool contact the cylindrical pin with too much force, the cylindrical pin would be harmlessly dislodged from the vee-shaped channel, preventing damage either to the cutting tool or the cylindrical pin. 5 figs.

  14. Damage and Damage Prediction for Wood Shearwalls Subjected to Simulated Earthquake Loads

    E-Print Network [OSTI]

    Gupta, Rakesh

    Damage and Damage Prediction for Wood Shearwalls Subjected to Simulated Earthquake Loads John W damaged resulting in large financial losses. Societal demands for damage-limiting design philosophies and better predict damage to woodframe structures. This paper examines damage to the lateral load carrying

  15. Excitation optimization for damage detection

    SciTech Connect (OSTI)

    Bement, Matthew T [Los Alamos National Laboratory; Bewley, Thomas R [UCSD

    2009-01-01T23:59:59.000Z

    A technique is developed to answer the important question: 'Given limited system response measurements and ever-present physical limits on the level of excitation, what excitation should be provided to a system to make damage most detectable?' Specifically, a method is presented for optimizing excitations that maximize the sensitivity of output measurements to perturbations in damage-related parameters estimated with an extended Kalman filter. This optimization is carried out in a computationally efficient manner using adjoint-based optimization and causes the innovations term in the extended Kalman filter to be larger in the presence of estimation errors, which leads to a better estimate of the damage-related parameters in question. The technique is demonstrated numerically on a nonlinear 2 DOF system, where a significant improvement in the damage-related parameter estimation is observed.

  16. Electrical utilities relay settings

    SciTech Connect (OSTI)

    HACHE, J.M.

    1999-02-24T23:59:59.000Z

    This document contains the Hanford transmission and distribution system relay settings that are under the control of Electrical Utilities.

  17. Deforming Meyer sets

    E-Print Network [OSTI]

    Jeong-Yup Lee; Robert V. Moody

    2009-10-23T23:59:59.000Z

    A linear deformation of a Meyer set $M$ in $\\RR^d$ is the image of $M$ under a group homomorphism of the group $[M]$ generated by $M$ into $\\RR^d$. We provide a necessary and sufficient condition for such a deformation to be a Meyer set. In the case that the deformation is a Meyer set and the deformation is injective, the deformation is pure point diffractive if the orginal set $M$ is pure point diffractive.

  18. Gradient damage models and their use to approximate brittle fracture Kim Phama,b, Hanen Amorc,, Jean-Jacques Marigod, Corrado Maurinia,b,

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Gradient damage models and their use to approximate brittle fracture Kim Phama,b, Hanen Amorc of gradient damage models. In the present paper, we first formulate the quasi-static evolution problem of damage. These concepts are applied in the particular setting of a one-dimensional traction test

  19. Remote sensing and forest damage

    SciTech Connect (OSTI)

    Reid, N.J.

    1987-05-01T23:59:59.000Z

    Each year, damage to North American forests caused by insects, diseases, pollution, and fire results in multibillion dollar losses of revenue and resources. To respond to these losses effectively, forest managers need timely information on the location, extent, and spread of the damage. Traditional techniques for monitoring forest damage include high-resolution aerial photography, color infrared photography, and visual reconnaissance mapping. These techniques require visual interpretation of the data and often are somewhat subjective. In addition, because such analyses are time-consuming and costly, many areas of forest are never mapped, and in cases where maps exist, they often are obsolete or incomplete. An airborne imager has been developed to solve the problems of time-consuming visual analysis and interpretations. The Programmable Multispectral Imager measures small changes - invisible by conventional detection methods - in light reflected by the forest canopy. The PMI measures the color an intensity of reflected light and records this information digitally in computer tape aboard an aircraft. This information is then available for later entry into a computer for processing and enhancement. Although airborne imagers have been available for nearly three decades, they have not been used extensively for forest damage assessment or other forestry applications because of their poor sensitivity and their limited number of fixed spectral channels. The PMI is the first of a new generation of imagers that combine high sensitivity with the flexibility of continuous spectral coverage. This allows scientists to evaluate the potential causes and effects of stress on vegetation.

  20. Collateral damage: Evolution with displacement of fracture distribution and secondary fault strands in fault damage zones

    E-Print Network [OSTI]

    Savage, Heather M.; Brodsky, Emily E.

    2011-01-01T23:59:59.000Z

    E. McCallum (1999), Reservoir damage around faults: OutcropSkar (2005), Controls on damage zone asymmetry of a normal2007), The evolution of the damage zone with fault growth in

  1. Method for producing damage resistant optics

    DOE Patents [OSTI]

    Hackel, Lloyd A. (Livermore, CA); Burnham, Alan K. (Livermore, CA); Penetrante, Bernardino M. (San Ramon, CA); Brusasco, Raymond M. (Livermore, CA); Wegner, Paul J. (Livermore, CA); Hrubesh, Lawrence W. (Pleasanton, CA); Kozlowski, Mark R. (Windsor, CA); Feit, Michael D. (Livermore, CA)

    2003-01-01T23:59:59.000Z

    The present invention provides a system that mitigates the growth of surface damage in an optic. Damage to the optic is minimally initiated. In an embodiment of the invention, damage sites in the optic are initiated, located, and then treated to stop the growth of the damage sites. The step of initiating damage sites in the optic includes a scan of the optic using a laser to initiate defects. The exact positions of the initiated sites are identified. A mitigation process is performed that locally or globally removes the cause of subsequent growth of the damaged sites.

  2. Insulator damage endangers public, power reliability; ratepayers...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for tips about multiple incidents of insulators damaged by firearms on its high-voltage power line near Joint Base Lewis-McChord in Tacoma, Wash. Damaged insulators can put...

  3. A damage model for fracking

    E-Print Network [OSTI]

    Norris, J Quinn; Rundle, John B

    2015-01-01T23:59:59.000Z

    Injections of large volumes of water into tight shale reservoirs allows the extraction of oil and gas not previously accessible. This large volume "super" fracking induces damage that allows the oil and/or gas to flow to an extraction well. The purpose of this paper is to provide a model for understanding super fracking. We assume that water is injected from a small spherical cavity into a homogeneous elastic medium. The high pressure of the injected water generates hoop stresses that reactivate natural fractures in the tight shales. These fractures migrate outward as water is added creating a spherical shell of damaged rock. The porosity associated with these fractures is equal to the water volume injected. We obtain an analytic expression for this volume. We apply our model to a typical tight shale reservoir and show that the predicted water volumes are in good agreement with the volumes used in super fracking.

  4. Damaged Fuel Experiment DF-1

    SciTech Connect (OSTI)

    Gasser, R.D.; Fryer, C.P.; Gauntt, R.O.; Marshall, A.C.; Reil, K.O.; Stalker, K.T.

    1990-01-01T23:59:59.000Z

    A series of in-pile experiments addressing LWR severe fuel damage phenomena has been conducted in the Annular Core Research Reactor (ACRR) at Sandia National Laboratories. The ACRR Debris Formation and Relocation (DF) experiments are quasi-separate effects tests that provide a data base for the development and verification of models for LWR severe core damage accidents. The first experiment in this series, DF-1, was performed on March 15, 1984, and the results are presented in this report. The DF-1 experiment examined the effects of low initial clad oxidation conditions on fuel damage and relocation processes. The DF-1 test assembly consisted of a nine-rod square-matrix bundle that employed PWR-type fuel rods with a 0.5-m fissile length. The fuel rods were composed of 10% enriched UO{sub 2} pellets within a zircaloy-4 cladding. Steam flowed through the test bundle at flow rates varying between 0.5 and 3 g/s, and the ACRR maintained a peak power level of 1.5 MW during the high temperature oxidation phase of the test inducing {approximately}8.5 kW fission power and {approximately}20 kW peak oxidation power in the assembly. Visual observation showed early clad relocation and partial blockage formation at the grid spacer location accompanied by production of a dense aerosol. Posttest cross sections show liquefaction losses of fuel in excess of 10 volume percent, as well as large fractional losses of cladding material from the upper two-thirds of the bundle. The quantity of hydrogen measured during the test was consistent with the observed magnitude of cladding oxidation. Oxidation driven heating rates of 25 K/s and peak temperatures in excess of 2525 K were observed. The analyses, interpretation, and application of these results to severe fuel damage accidents are discussed. 27 refs., 118 figs., 23 tabs.

  5. Nondestructive Damage Detection in General Beams 

    E-Print Network [OSTI]

    Dincal, Selcuk

    2010-12-08T23:59:59.000Z

    Representation of the First Damage Case on the Finite Element Mesh of the Slender Beam ...................................................... 41 Figure 3.12 Schematic Representation of the Second Damage Case on the Finite Element Mesh... of the Slender Beam ...................................................... 42 Figure 3.13 Schematic Representation of the Third Damage Case on the Finite Element Mesh of the Slender Beam ...................................................... 44...

  6. Multiscale Modeling of Radiation Damage in

    E-Print Network [OSTI]

    Multiscale Modeling of Radiation Damage in Fusion Reactor Materials Brian D. Wirth, R.J. Kurtz-7405-Eng-48. #12;Presentation overview · Introduction to fusion reactor materials and radiation damage. tailor He HFIR isotopic tailor He HFIR target/RB He appmHe displacement damage (dpa) ffuussiioonn

  7. Density Functional Theory Models for Radiation Damage

    E-Print Network [OSTI]

    Density Functional Theory Models for Radiation Damage S.L. Dudarev EURATOM/CCFE Fusion Association and informative as the most advanced experimental techniques developed for the observation of radiation damage investigation and assessment of radiation damage effects, offering new insight into the origin of temperature

  8. Structural Damage Detection and Localization Using NETSHM

    E-Print Network [OSTI]

    Gnawali, Omprakash

    Structural Damage Detection and Localization Using NETSHM Krishna Chintalapudi, Jeongyeup Paek and localize damage in large civil structures. Structural engineers often implement and test SHM algorithms the intricacies of wireless networking, or the details of sensor data acquisition. We have implemented a damage

  9. Damage Detection in Plate Structures using Guided Ultrasonic Waves

    E-Print Network [OSTI]

    Jarmer, Gregory James Sylvester

    2009. “Evaluation of the Damage Detection Capability of alikelihood Estimation of Damage Location in Guided- waveStatistically-based Damage Detection in Geometrically-

  10. Micromechanical Damage Models for Continuous Fiber Reinforced Composite Materials

    E-Print Network [OSTI]

    Wu, Yi

    2013-01-01T23:59:59.000Z

    2008). Micromechanical modeling of damage and fracture ofmatrix viscoplasticity and evolving damage, Journal of theW.A. (1998). Stochastic damage evolution and failure in

  11. Blast damage mitigation of steel structures from near- contact charges

    E-Print Network [OSTI]

    Wolfson, Janet Crumrine

    2008-01-01T23:59:59.000Z

    OF CALIFORNIA, SAN DIEGO Blast Damage Mitigation of Steel35  Damage Levels Observed in LaboratoryFigure 3.34: Progression of damage for a Ballistic Loading

  12. Cognitive Empathy Following Orbitofrontal Cortex and Dorsolateral Prefrontal Cortex Damage

    E-Print Network [OSTI]

    Goodkind, Madeleine Shirley

    2010-01-01T23:59:59.000Z

    following bilateral damage to the human amygdala. Nature,as a measure of frontal lobe damage. Journal of Clinical andcaused by frontal damage fail to respond autonomically to

  13. International Trade and the Internalization of Environmental Damages

    E-Print Network [OSTI]

    Karp, Larry; Dumas, Christopher F.; Koo, Bonwoo; Sacheti, Sandeep

    1995-01-01T23:59:59.000Z

    estimates of environmental damages efficiently and quickly,an overview of environmental damages and internalizationdo little to decrease environmental damage, and may actually

  14. data_sets.indd

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DATA SETS T est your technology with real data from RMOTC. RMOTC offers its non-proprietary data free of charge under certain terms and conditions. If you or your organization is...

  15. Synchronization of Limit Sets

    E-Print Network [OSTI]

    Changpin Li; Weihua Deng

    2005-10-10T23:59:59.000Z

    In this Letter, we derive a sufficient condition of synchronizing limit sets (attractors and repellers) by using the linear feedback control technique proposed here. There examples are included. The numerical simulations and computer graphics show that our method work well.

  16. Nonlocal Damage Models 8.1 Basic Types of Nonlocal Damage Formulations

    E-Print Network [OSTI]

    Jirasek, Milan

    Chapter 8 Nonlocal Damage Models 8.1 Basic Types of Nonlocal Damage Formulations 8.1.1 Formulations Motivated by Isotropic Damage A number of nonlocal concepts giving local response in the linear elastic damage model from Section 5.2. Certain models use a formulation in which the role of the equivalent

  17. Set theory and physics

    SciTech Connect (OSTI)

    Svozil, K. [Univ. of Technology, Vienna (Austria)

    1995-11-01T23:59:59.000Z

    Inasmuch as physical theories are formalizable, set theory provides a framework for theoretical physics. Four speculations about the relevance of set theoretical modeling for physics are presented: the role of transcendental set theory (i) in chaos theory, (ii) for paradoxical decompositions of solid three-dimensional objects, (iii) in the theory of effective computability (Church-Turing thesis) related to the possible {open_quotes}solution of supertasks,{close_quotes} and (iv) for weak solutions. Several approaches to set theory and their advantages and disadvantages for physical applications are discussed: Cantorian {open_quotes}naive{close_quotes} (i.e., nonaxiomatic) set theory, contructivism, and operationalism. In the author`s opinion, an attitude, of {open_quotes}suspended attention{close_quotes} (a term borrowed from psychoanalysis) seems most promising for progress. Physical and set theoretical entities must be operationalized wherever possible. At the same time, physicists should be open to {open_quotes}bizarre{close_quotes} or {open_quotes}mindboggling{close_quotes} new formalisms, which need not be operationalizable or testable at the time of their creation, but which may successfully lead to novel fields of phenomenology and technology.

  18. 28-nm laser damage testing of LIF

    SciTech Connect (OSTI)

    Foltyn, S.R.; Newman, B.E.

    1981-01-01T23:59:59.000Z

    We have tested several samples of LIF, both single crystal and press forged, for damage resistance to 10-ns 248-nm pulses at 35 pps. The damage thresholds - the highest levels at which no damage could be produced - ranged from 4 to 6 J/cm/sup 2/ although some test sites survived irradiation at approx. 30 J/cm/sup 2/. We observed that bulk damage is the primary failure mechanism in single crystal and press forged samples and that both types exhibit the same resistance to laser damage.

  19. Damage experiments in a cylindrical geometry

    SciTech Connect (OSTI)

    Kaul, Ann M [Los Alamos National Laboratory

    2010-09-21T23:59:59.000Z

    Studying spallation damage with a cylindrical configuration allows for a natural recollection of the damaged material under proper driving conditions. Additionally, the damaged material can come to a complete rest without the application of further stopping forces. Specific areas of research include the damage initiation regime in convergent geometry, behavior of material recollected after damage, and effects of convergent geometry on the material response. Such experiments produce unique strain and shear stress states, motivating improvements in existing computational material models and increasing the predictive capabilities of codes. A LANL/VNIIEF joint experimental series has produced cylindrical aluminum failure initiation data and studied the behavior of material recollected after damage initiation and after complete failure. In addition to post-shot collection of the damaged target material for subsequent metallographic analysis, dynamic in-situ experimental diagnostics include velocimetry and transverse radial radiography. This paper will discuss the current experimental status.

  20. Functional Answer Set Programming

    E-Print Network [OSTI]

    Cabalar, Pedro

    2010-01-01T23:59:59.000Z

    In this paper we propose an extension of Answer Set Programming (ASP), and in particular, of its most general logical counterpart, Quantified Equilibrium Logic (QEL), to deal with partial functions. Although the treatment of equality in QEL can be established in different ways, we first analyse the choice of decidable equality with complete functions and Herbrand models, recently proposed in the literature. We argue that this choice yields some counterintuitive effects from a logic programming and knowledge representation point of view. We then propose a variant called QELF where the set of functions is partitioned into partial and Herbrand functions (we also call constructors). In the rest of the paper, we show a direct connection to Scott's Logic of Existence and present a practical application, proposing an extension of normal logic programs to deal with partial functions and equality, so that they can be translated into function-free normal programs, being possible in this way to compute their answer sets...

  1. Identifying structural damage from images

    E-Print Network [OSTI]

    Chen, ZhiQiang

    2009-01-01T23:59:59.000Z

    level set functions, the signed distance functions (SDF).A SDF, denoted by ?(x), de?nes the distance values from (x)’The construction of an SDF is usually used as an auxiliary

  2. Logic and the set theory Lecture 19: The set theory

    E-Print Network [OSTI]

    Choi, Suhyoung

    Logic and the set theory Lecture 19: The set theory S. Choi Department of Mathematical Science KAIST, Daejeon, South Korea Fall semester, 2012 S. Choi (KAIST) Logic and set theory November 20, 2012 1 / 24 #12;Introduction About this lecture Axioms of the set theory S. Choi (KAIST) Logic and set theory

  3. Nanofoams Response to Radiation Damage

    SciTech Connect (OSTI)

    Fu, Engang [Los Alamos National Laboratory; Serrano De Caro, Magdalena [Los Alamos National Laboratory; Wang, Yongqiang [Los Alamos National Laboratory; Nastasi, Michael [Nebraska Center for Energy Sciences Research, University of Nebraska-Lincoln, NE 68508; Zepeda-Ruiz, Luis [PLS, Lawrence Livermore National Laboratory, Livermore, CA 94551; Bringa, Eduardo M. [CONICET and Inst. Ciencias Basicas, Universidad Nacional de Cuyo, Mendoza, 5500 Argentina; Baldwin, Jon K. [Los Alamos National Laboratory; Caro, Jose A. [Los Alamos National Laboratory

    2012-07-30T23:59:59.000Z

    Conclusions of this presentation are: (1) np-Au foams were successfully synthesized by de-alloying process; (2) np-Au foams remain porous structure after Ne ion irradiation to 1 dpa; (3) SFTs were observed in irradiated np-Au foams with highest and intermediate flux, while no SFTs were observed with lowest flux; (4) SFTs were observed in irradiated np-Au foams at RT, whereas no SFTs were observed at LNT irradiation; (5) The diffusivity of vacancies in Au at RT is high enough so that the vacancies have enough time to agglomerate and thus collapse. As a result, SFTs were formed; (6) The high flux created much more damage/time, vacancies don't have enough time to diffuse or recombine. As a result, SFTs were formed.

  4. Method for assaying clustered DNA damages

    DOE Patents [OSTI]

    Sutherland, Betsy M.

    2004-09-07T23:59:59.000Z

    Disclosed is a method for detecting and quantifying clustered damages in DNA. In this method, a first aliquot of the DNA to be tested for clustered damages with one or more lesion-specific cleaving reagents under conditions appropriate for cleavage of the DNA to produce single-strand nicks in the DNA at sites of damage lesions. The number average molecular length (Ln) of double stranded DNA is then quantitatively determined for the treated DNA. The number average molecular length (Ln) of double stranded DNA is also quantitatively determined for a second, untreated aliquot of the DNA. The frequency of clustered damages (.PHI..sub.c) in the DNA is then calculated.

  5. On Q-sets

    E-Print Network [OSTI]

    Fleissner, William G.; Miller, Arnold W.

    1980-02-01T23:59:59.000Z

    from X is a separable normal nonmetrizable Moore space. Theorem 2. Each of the following statements implies the next. (a) Martin's Axiom plus the negation of the Continuum Hypothesis. (b) There are no ß limits in the partial order (ß(u),Q mod finite.... Assume that 2"1 = wherep = (pß: ß is a sequence of basic open sets from B and where f = wim each ry m something like P(A, X) above. In the extension, M[G], we...

  6. Structural-Damage Detection by Distributed Piezoelectric Transducers and Tuned Electric Circuits

    E-Print Network [OSTI]

    F. dell'Isola; F. Vestroni; S. Vidoli

    2010-07-13T23:59:59.000Z

    A novel technique for damage detection of structures is introduced and discussed. It is based on purely electric measurements of the state variables of an electric network coupled to the main structure through a distributed set of piezoelectric patches. The constitutive parameters of this auxiliary network are optimized to increase the sensitivity of global measurements- as the frequency, response functions relative to selected electric degrees of freedom-with respect to a given class of variations in the structural-mechanical properties. Because the proposed method is based on purely electric input and output measurements, it allows for accurate results in the identification and localization of damages. Use of the electric frequency-response function to identify the mechanical damage leads to nonconvex optimization problems; therefore the proposed sensitivity-enhanced identification procedure becomes computationally efficient if an a priori knowledge about the damage is available.

  7. A micro to macro approach to polymer matrix composites damage modeling : final LDRD report.

    SciTech Connect (OSTI)

    English, Shawn Allen; Brown, Arthur A.; Briggs, Timothy M.

    2013-12-01T23:59:59.000Z

    Capabilities are developed, verified and validated to generate constitutive responses using material and geometric measurements with representative volume elements (RVE). The geometrically accurate RVEs are used for determining elastic properties and damage initiation and propagation analysis. Finite element modeling of the meso-structure over the distribution of characterizing measurements is automated and various boundary conditions are applied. Plain and harness weave composites are investigated. Continuum yarn damage, softening behavior and an elastic-plastic matrix are combined with known materials and geometries in order to estimate the macroscopic response as characterized by a set of orthotropic material parameters. Damage mechanics and coupling effects are investigated and macroscopic material models are demonstrated and discussed. Prediction of the elastic, damage, and failure behavior of woven composites will aid in macroscopic constitutive characterization for modeling and optimizing advanced composite systems.

  8. KU Public Safety Office Criminal Damage

    E-Print Network [OSTI]

    in the damage of a Coca-Cola vending machine in the Parking Services lobby at 1501 Irving Hill Drive and damage to Coca-Cola vending machines across the campus. Suspect Description: W/M, 5 feet 10 inches, 150

  9. Damage and plastic deformation of reservoir rocks

    E-Print Network [OSTI]

    Ze'ev, Reches

    Damage and plastic deformation of reservoir rocks: Part 1. Damage fracturing Seth Busetti, Kyran mechanics, fluid flow in fractured reservoirs, and geomechanics in nonconventional reservoirs. Kyran Mish finite deformation of reservoir rocks. We present an at- tempt to eliminate the main limitations

  10. MODELING LONGITUDINAL DAMAGE IN SHIP COLLISIONS

    E-Print Network [OSTI]

    Brown, Alan

    . Performing Organization Name and Address Department of Aerospace and Ocean Engineering. 10. Work Unit No made excellent progress towards predicting damage penetration in ship collisions. This project focuses collision data for penetrating collisions. 17. Key Words ship collisions, longitudinal ship damage 18

  11. Floating intake reduces pump damage

    SciTech Connect (OSTI)

    Kronig, A.

    1993-12-31T23:59:59.000Z

    The solution to a costly sand erosion problem at the Grande Dixence hydroelectric project in Switzerland turned out to be as simple as a floating pump. The 726-MW Grande Dixence project drains a 350-square-kilometer reach of the Zermatt and Herens valleys in the southwestern Swiss Alps. About half of the drainage area is covered by active glaciers. Because the glaciers in Zermatt Valley are so low in altitude, their water is collected in Z`mutt Reservoir at the base of the Matterhorn, then pumped up 500 meters for transport to the main Grande Disence Reservoir near Sion. The glacier water is heavily laden with sand. In spite of a gravel pass and a desilter, the 700,000-acubic-meter Z`mutt Reservoir receives large quantities of sand. The sand tends to remain in solution because of the low water temperatures (1 to 2 degrees Centigrade). In the original intake system, the sand would be sucked into the pump intakes, causing extensive erosion to the pump wheels and an expensive yearly program of repair. (Pump damage averaged 200,000 Swiss Francs ($284,000 U.S.) per year between 1980 and 1985.)

  12. War damages and reconstruction of Peruca dam

    SciTech Connect (OSTI)

    Nonveiller, E. [Univ. of Zagreb (Croatia). Faculty of Civil Engineering] [Univ. of Zagreb (Croatia). Faculty of Civil Engineering; Rupcic, J. [Univ. of Zagreb (Croatia). Faculty of Civil Engineering] [Univ. of Zagreb (Croatia). Faculty of Civil Engineering; [Elektroprojekt Consulting Engineering, Zagreb (Croatia); Sever, Z. [Elektroprojekt Consulting Engineering, Zagreb (Croatia)] [Elektroprojekt Consulting Engineering, Zagreb (Croatia)

    1999-04-01T23:59:59.000Z

    The paper describes the heavy damages caused by blasting in the Peruca rockfill dam in Croatia in January 1993. Complete collapse of the dam by overtopping was prevented through quick action of the dam owner by dumping clayey gravel on the lowest sections of the dam crest and opening the bottom outlet of the reservoir, thus efficiently lowering the water level. After the damages were sufficiently established and alternatives for restoration of the dam were evaluated, it was decided to construct a diaphragm wall through the damaged core in the central dam part as the impermeable dam element and to rebuild the central clay core at the dam abutments. Reconstruction works are described.

  13. Assessing United States hurricane damage under different environmental conditions

    E-Print Network [OSTI]

    Maheras, Anastasia Francis

    2012-01-01T23:59:59.000Z

    Hurricane activity between 1979 and 2011 was studied to determine damage statistics under different environmental conditions. Hurricanes cause billions of dollars of damage every year in the United States, but damage ...

  14. Beam damage of poly(2-chloroethyl methylacrylate) [PCEMA] films...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    evaluating x-ray damage. PCEMA has been shown to be more sensitive to degradation than PVC which has also been used as a damage sensitive material useful for comparison of damage...

  15. Radiation Damage Studies with Hadrons on Materials and Electronics

    E-Print Network [OSTI]

    2004-01-01T23:59:59.000Z

    PUB-10534 July 2004 Radiation Damage Studies with Hadrons oncontract DE–AC03–76SF00515. Radiation Damage Studies withand Zachary R. Wolf, “Radiation Damage Studies of Materials

  16. DAMAGE ASSESSMENT OF COMPOSITE PLATE STRUCTURES WITH UNCERTAINTY

    E-Print Network [OSTI]

    Boyer, Edmond

    DAMAGE ASSESSMENT OF COMPOSITE PLATE STRUCTURES WITH UNCERTAINTY Chandrashekhar M.* , Ranjan Uncertainties associated with a structural model and measured vibration data may lead to unreliable damage that material uncertainties in composite structures cause considerable problem in damage assessment which can

  17. New navel orangeworm sanitation standards ?could reduce almond damage

    E-Print Network [OSTI]

    Higbee, Bradley S.; Siegel, Joel P

    2009-01-01T23:59:59.000Z

    disruption, dispersal and damage prediction. Proc 34thtype and amount of insect damage. J Ag Food Chem 49:4513–9.standards could reduce almond damage by Bradley S. Higbee

  18. RADIATION DAMAGE TO BSCCO-2223 FROM 50 MEV PROTONS

    E-Print Network [OSTI]

    Zeller, A.F.; Ronningen, R.M.; Godeke, A.; Heilbronn, L.H.; McMahan-Norris, P.; Gupta, R.

    2007-01-01T23:59:59.000Z

    RADIATION DAMAGE TO BSCCO-2223 FROM 50 MEV PROTONS A. F.BSCCO-2223. Radiation damage. INTRODUCTION The magnets incomponents be resistant to damage. One solution [1] is to

  19. INSTANTANEOUS DAMAGE IDENTIFICATION AND LOCALIZATION THROUGH SPARSE LASER ULTRASONIC SCANNING

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    INSTANTANEOUS DAMAGE IDENTIFICATION AND LOCALIZATION THROUGH SPARSE LASER ULTRASONIC SCANNING This study proposes an instantaneous damage identification and localization technique through sparse laser ultrasonic signals are obtained, a damage index (DI) representing the violation of the linear reciprocity

  20. A Damage-Revelation Rationale for Coupon Remedies

    E-Print Network [OSTI]

    Polinsky, A. Mitchell; Rubinfeld, Daniel L

    2007-01-01T23:59:59.000Z

    Bargaining and the Design of Damage Awards,’’ 10 Journal ofGramlich, Fred. 1986. ‘‘Scrip Damages in Antitrust Cases,’’in the Assessment of Damages,’’ 39 Journal of Law and

  1. Earthquake Damage Identification using High-Resolution Satellite

    E-Print Network [OSTI]

    Shinozuka, Masanobu

    Earthquake Damage Identification using High-Resolution Satellite Images from the 2003 Northern & evaluation · High-resolution satellite imagery · Images from Boumerdes, Algeria · Semi-automated damage are most damaged? ­ Effects in less populated areas · Earthquake reconnaissance time wasted "looking

  2. Special set linear algebra and special set fuzzy linear algebra

    E-Print Network [OSTI]

    W. B. Vasantha Kandasamy; Florentin Smarandache; K. Ilanthenral

    2009-12-30T23:59:59.000Z

    The authors in this book introduce the notion of special set linear algebra and special set fuzzy Linear algebra, which is an extension of the notion set linear algebra and set fuzzy linear algebra. These concepts are best suited in the application of multi expert models and cryptology. This book has five chapters. In chapter one the basic concepts about set linear algebra is given in order to make this book a self contained one. The notion of special set linear algebra and their fuzzy analogue is introduced in chapter two. In chapter three the notion of special set semigroup linear algebra is introduced. The concept of special set n-vector spaces, n greater than or equal to three is defined and their fuzzy analogue is their fuzzy analogue is given in chapter four. The probable applications are also mentioned. The final chapter suggests 66 problems.

  3. Gas condensate damage in hydraulically fractured wells

    E-Print Network [OSTI]

    Adeyeye, Adedeji Ayoola

    2004-09-30T23:59:59.000Z

    Company. The well was producing a gas condensate reservoir and questions were raised about how much drop in flowing bottomhole pressure below dewpoint would be appropriate. Condensate damage in the hydraulic fracture was expected to be of significant...

  4. Dealing with Storm-Damaged Trees

    E-Print Network [OSTI]

    Kirk, Melanie; Taylor, Eric; Foster, C. Darwin

    2005-10-25T23:59:59.000Z

    Many homeowners need help caring for or removing damaged trees after a natural disaster. This publication explains what a certified arborist is and how to select one. It also cautions against burning debris downed by a storm....

  5. Dealing with Storm-Damaged Trees 

    E-Print Network [OSTI]

    Kirk, Melanie; Taylor, Eric; Foster, C. Darwin

    2005-10-25T23:59:59.000Z

    ER-040 5-06 Dealing with Storm-Damaged Trees Melanie R. Kirk, Extension Program Specialist, Eric L. Taylor, Assistant Professor and Extension Specialist, and C. Darwin Foster, Associate Department Head and Extension Program Leader for Forestry...

  6. Damage spreading and coupling in Markov chains

    E-Print Network [OSTI]

    Etienne P. Bernard; Cédric Chanal; Werner Krauth

    2011-06-23T23:59:59.000Z

    In this paper, we relate the coupling of Markov chains, at the basis of perfect sampling methods, with damage spreading, which captures the chaotic nature of stochastic dynamics. For two-dimensional spin glasses and hard spheres we point out that the obstacle to the application of perfect-sampling schemes is posed by damage spreading rather than by the survey problem of the entire configuration space. We find dynamical damage-spreading transitions deeply inside the paramagnetic and liquid phases, and show that critical values of the transition temperatures and densities depend on the coupling scheme. We discuss our findings in the light of a classic proof that for arbitrary Monte Carlo algorithms damage spreading can be avoided through non-Markovian coupling schemes.

  7. Micropatterned cell arrays for detecting DNA damage

    E-Print Network [OSTI]

    Mittal, Sukant

    2008-01-01T23:59:59.000Z

    Numerous agents are capable of interacting with DNA and damaging it. Permanent changes in the DNA structure can be both mutagenic and cytotoxic; therefore, methods to measure the susceptibility of cells to mutations are ...

  8. Formation damage in underbalanced drilling operations

    E-Print Network [OSTI]

    Reyes Serpa, Carlos Alberto

    2003-01-01T23:59:59.000Z

    Formation damage has long been recognized as a potential source of reduced productivity and injectivity in both horizontal and vertical wells. From the moment that the pay zone is being drilled until the well is put on production, a formation...

  9. Nondestructive Damage Detection in General Beams

    E-Print Network [OSTI]

    Dincal, Selcuk

    2010-12-08T23:59:59.000Z

    is also vital for a nation’s economy. Substantial sums of money may be saved upon detecting structural deterioration in a timely manner. Nondestructive damage evaluation (NDE) offers effective and economically feasible solutions to perform such tasks...

  10. Los Alamos National Laboratory describes storm damage to environmental...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Los Alamos National Laboratory describes storm damage Los Alamos National Laboratory describes storm damage to environmental monitoring stations, canyons Stations supporting Santa...

  11. area damage detection: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    answer Cherkaev, Andrej 10 DAMAGE DETECTION IN STIFFENED AIRCRAFT PANELS VIA VIBRATION TESTING CiteSeer Summary: SUMMARY: The problem of damage detection in stiffened aircraft...

  12. Evader Interdiction and Collateral Damage

    SciTech Connect (OSTI)

    Gutfraind, Alexander [Los Alamos National Laboratory

    2011-01-01T23:59:59.000Z

    In network interdiction problems, evaders (hostile agents or data packets) are moving through a network towards their targets and we wish to choose sensor placement locations in order to intercept them before they reach their destinations. Sensor locations should be chosen economically, balancing security gains with cost, including the inconvenience sensors inflict upon innocent travelers. We give optimal sensor allocation algorithms for several classes of special graphs and hardness and optimal approximation results for general graphs, including for deterministic or Markov chain-based and oblivious or reactive evaders. In a similar-sounding but much different problem setting posed by [10] where the innocent travelers can also be reactive, we again give optimal algorithms for special cases and hardness and (essentially) optimal approximation results on general graphs.

  13. Controlled ion implant damage profile for etching

    DOE Patents [OSTI]

    Arnold, Jr., George W. (Tijeras, NM); Ashby, Carol I. H. (Edgewood, NM); Brannon, Paul J. (Albuquerque, NM)

    1990-01-01T23:59:59.000Z

    A process for etching a material such as LiNbO.sub.3 by implanting ions having a plurality of different kinetic energies in an area to be etched, and then contacting the ion implanted area with an etchant. The various energies of the ions are selected to produce implant damage substantially uniformly throughout the entire depth of the zone to be etched, thus tailoring the vertical profile of the damaged zone.

  14. Structural damage detection using frequency response functions

    E-Print Network [OSTI]

    Dincal, Selcuk

    2006-04-12T23:59:59.000Z

    .........................90 5.1.2 Case 3: 1 st - 3 rd Story Braces Are Damaged .................................................92 5.1.2.1 All Four Modes Are Used for Damage Detection..........................95 5.1.2.2 The Last Two Modes... for Trial #2 with Hillclimbing #739 .......................................................................................................... 92 Figure 5.8 FRF for the 1 st Floor – 1 st - 3 rd Story Braces Are Broken SIMO – 12 DOF Symmetric...

  15. Set Linear Algebra and Set Fuzzy Linear Algebra

    E-Print Network [OSTI]

    W. B. Vasantha Kandasamy; Florentin Smarandache; K. Ilanthenral

    2008-06-17T23:59:59.000Z

    In this book, the authors define the new notion of set vector spaces which is the most generalized form of vector spaces. Set vector spaces make use of the least number of algebraic operations, therefore, even a non-mathematician is comfortable working with it. It is with the passage of time, that we can think of set linear algebras as a paradigm shift from linear algebras. Here, the authors have also given the fuzzy parallels of these new classes of set linear algebras. This book is divided into seven chapters. The first chapter briefly recalls some of the basic concepts in order to make this book self-contained. Chapter two introduces the notion of set vector spaces which is the most generalized concept of vector spaces. Set vector spaces lends itself to define new classes of vector spaces like semigroup vector spaces and group vector spaces. These are also generalization of vector spaces. The fuzzy analogue of these concepts are given in Chapter three. In Chapter four, set vector spaces are generalized to biset bivector spaces and not set vector spaces. This is done taking into account the advanced information technology age in which we live. As mathematicians, we have to realize that our computer-dominated world needs special types of sets and algebraic structures. Set n-vector spaces and their generalizations are carried out in Chapter five. Fuzzy n-set vector spaces are introduced in the sixth chapter. The seventh chapter suggests more than three hundred problems.

  16. TREATMENT OF HYDROCARBON, ORGANIC RESIDUE AND PRODUCTION CHEMICAL DAMAGE MECHANISMS THROUGH THE APPLICATION OF CARBON DIOXIDE IN NATURAL GAS STORAGE WELLS

    SciTech Connect (OSTI)

    Lawrence J. Pekot; Ron Himes

    2004-05-31T23:59:59.000Z

    Core specimens and several material samples were collected from two natural gas storage reservoirs. Laboratory studies were performed to characterize the samples that were believed to be representative of a reservoir damage mechanism previously identified as arising from the presence of hydrocarbons, organic residues or production chemicals. A series of laboratory experiments were performed to identify the sample materials, use these materials to damage the flow capacity of the core specimens and then attempt to remove or reduce the induced damage using either carbon dioxide or a mixture of carbon dioxide and other chemicals. Results of the experiments showed that pure carbon dioxide was effective in restoring flow capacity to the core specimens in several different settings. However, in settings involving asphaltines as the damage mechanism, both pure carbon dioxide and mixtures of carbon dioxide and other chemicals provided little effectiveness in damage removal.

  17. Dynamics in the Category Set

    E-Print Network [OSTI]

    Elemer E Rosinger

    2010-04-09T23:59:59.000Z

    What makes sets, or more precisely, the category {\\bf Set} important in Mathematics are the well known {\\it two} specific ways in which arbitrary mappings $f : X \\longrightarrow Y$ between any two sets $X, Y$ can {\\it fail} to be bijections. Namely, they can fail to be injective, and/or to be surjective. As for bijective mappings they are rather trivial, since with some relabeling of their domains or ranges, they simply become permutations, or even identity mappings. \\\\ To the above, one may add the {\\it third} property of sets, namely that, between any two nonvoid sets there exist mappings. \\\\ These three properties turn out to be at the root of much of the interest which the category {\\bf Set} has in Mathematics. Specifically, these properties create a certain {\\it dynamics}, or for that matter, lack of it, on the level of the category {\\bf Set} and of some of its subcategories.

  18. DAMAGE ESTIMATION USING MULTI-OBJECTIVE GENETIC ALGORITHMS Faisal Shabbir

    E-Print Network [OSTI]

    Boyer, Edmond

    DAMAGE ESTIMATION USING MULTI-OBJECTIVE GENETIC ALGORITHMS Faisal Shabbir 1 , Piotr Omenzetter 2 1.omenzetter@abdn.ac.uk ABSTRACT It is common to estimate structural damage severity by updating a structural model against experimental responses at different damage states. When experimental results from the healthy and damaged

  19. RUPTURE BY DAMAGE ACCUMULATION IN ROCKS David Amitrano

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    RUPTURE BY DAMAGE ACCUMULATION IN ROCKS David Amitrano LIRIGM, Université J. Fourier, Grenoble of rocks is associated with microcracks nucleation and propagation, i.e. damage. The accumulation of damage as strength and modulus. The damage process can be studied both statically by direct observation of thin

  20. Ductile damage parameters identification for cold metal forming applications

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Ductile damage parameters identification for cold metal forming applications Pierre damage mechanics is essential to predict failure during cold metal forming applications. Several damage models can be found in the literature. These damage models are coupled with the mechanical behavior so

  1. Damage from pulses with arbitrary temporal shapes

    SciTech Connect (OSTI)

    Trenholme, J.B.

    1994-06-06T23:59:59.000Z

    In fusion laser designs, the laser pulse has a complicated temporal shape which undergoes significant change as it passes through the laser. Our damage data, however, was taken with pulses whose temporal shapes were (more or less) Gaussian. We want to determine the damage propensity of a material exposed to a pulse of arbitrary temporal shape , given data taken with Gaussian pulses of different pulse widths. To do so, we must adopt a physical model of damage. This model will contain some number of parameters that depend on material properties, geometry, and so forth. We determine the parameters of the model appropriate to each material by fitting the model to the Gaussian data for that material. The resulting normalized model is then applied, using the appropriate pulse shape, to find the damage level for a specific material subjected to a specific pulse. The model we shall assume is related to diffusion, although (as we shall see) the experimental results do not fit any simple diffusion model. Initially, we will discuss simple diffusion models. We then examine some experimental data, and then develop a modified diffusive model from that data. That modified model is then used to predict damage levels in various portions of the NIF laser design.

  2. Management of Critical Machine Settings for Accelerators at CERN

    E-Print Network [OSTI]

    Sliwinski, W; Kain, V; Kruk, G

    2009-01-01T23:59:59.000Z

    In high energy and high intensity accelerators as the LHC, the energy stored in the beams is orders of magnitude above the damage level of accelerator components like magnets. Uncontrolled release of this energy can lead to serious damage of equipment and long machine downtimes. In order to cope with these potential risks Protection Systems were developed at CERN including two software systems: MCS (Management of Critical Settings) and RBAC (Role Based Access Control). RBAC provides an authentication and authorization facility for access to the critical parts of the control system. A second layer of security is provided by MCS which ensures that critical parameters are coherent within the software and hardware components and can only be changed by an authorized person. The MCS system is aimed at the most critical parameters in either potentially dangerous equipment or protection devices (e.g. Beam Loss Monitors). It is complementary to the RBAC infrastructure. Both systems are fully integrated in the control ...

  3. Fretting Corrosion Damage of Total Hip Prosthesis: Friction Coefficient and Damage Rate Constant Approach

    E-Print Network [OSTI]

    Boyer, Edmond

    1 Fretting Corrosion Damage of Total Hip Prosthesis: Friction Coefficient and Damage Rate Constant Building, University Park 16802 PA USA 4 Chair Professor Center for Research Excellence in Corrosion hip prosthesis. Fretting corrosion tests were conducted with stainless steel and poly (methyl

  4. Method to reduce damage to backing plate

    DOE Patents [OSTI]

    Perry, Michael D. (Livermore, CA); Banks, Paul S. (Livermore, CA); Stuart, Brent C. (Fremont, CA)

    2001-01-01T23:59:59.000Z

    The present invention is a method for penetrating a workpiece using an ultra-short pulse laser beam without causing damage to subsequent surfaces facing the laser. Several embodiments are shown which place holes in fuel injectors without damaging the back surface of the sack in which the fuel is ejected. In one embodiment, pulses from an ultra short pulse laser remove about 10 nm to 1000 nm of material per pulse. In one embodiment, a plasma source is attached to the fuel injector and initiated by common methods such as microwave energy. In another embodiment of the invention, the sack void is filled with a solid. In one other embodiment, a high viscosity liquid is placed within the sack. In general, high-viscosity liquids preferably used in this invention should have a high damage threshold and have a diffusing property.

  5. To be submitted to Continuum Mechanics and Thermodynamics From the onset of damage to rupture: construction of responses with damage

    E-Print Network [OSTI]

    Boyer, Edmond

    To be submitted to Continuum Mechanics and Thermodynamics From the onset of damage to rupture: construction of responses with damage localization for a general class of gradient damage models Kim Pham solutions for the traction problem of an elastic damaging bar. This bar has a softening behavior which obeys

  6. Delay-active damage versus non-local enhancement for anisotropic damage dynamics computations with alternated loading

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Delay-active damage versus non-local enhancement for anisotropic damage dynamics computations, Laboratoire d'´etudes dynamiques F-91191 GIF-SUR-YVETTE Abstract Anisotropic damage thermodynamics framework of anisotropic visco-damage, by introducing a material strain rate effect in the cases of positive hydro- static

  7. GENERALIZED SUPPORT SET INVARIANCY SENSITIVITY ...

    E-Print Network [OSTI]

    2005-05-16T23:59:59.000Z

    CQO problems by focusing on the support set of slack variables in dual optimal solutions. ... resources in storage as he had before.” Meanwhile, the manager ...

  8. Set the PACE St. Louis

    Broader source: Energy.gov [DOE]

    Commercial property owners, community associations (e.g., Home Owners Associations), and some residential property owners are eligible for Set the PACE St. Louis. Currently, only residential prop...

  9. SHM Data Sets and Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sets and Software Contact Institute Director Charles Farrar (505) 663-5330 Email UCSD EI Director Michael Todd (858) 534-5951 Professional Staff Assistant Jutta Kayser (505)...

  10. Seawater can damage Saudi sandstone oil reservoirs

    SciTech Connect (OSTI)

    Dahab, A.S. (King Saud Univ., Riyadh (SA))

    1990-12-10T23:59:59.000Z

    Experiments have shown that formation damage from waterflooding of the Aramco and Alkhafji sandstones of Saudi Arabia will not occur if the salinity of the injected brines is higher than 20% NaCl. Because the connate water in these reservoirs has a high salt content of up to 231,000 ppm, Saudi oil fields are almost always susceptible to formation damage when flooded with seawater (about 38,500 ppm). The productive behavior of a reservoir can be affected by clay crystals developed within rock pores.

  11. Ubiquitylation, neddylation and the DNA damage response

    E-Print Network [OSTI]

    Brown, Jessica S.; Jackson, Stephen P.

    2015-04-01T23:59:59.000Z

    major families: RING (really interesting new gene), HECT (homology to E6AP car- boxyl-terminus) and RBR (ring between ring) [102,103]. The transcription, respectively [88] trans-lesion synthesis (TLS) TLS is a DNA damage bypass mechanism tha It employs... depends on RNF4 binding to SUMO2/3 polymeric chains and subsequent RNF4 dimerization [183]. In addition to its role in promoting the turnover of proteins, RNF4 might also be important for the formation of hybrid SUMO/ubiquitin chains at DNA damage sites...

  12. The Status of Radiation Damage Experiments

    SciTech Connect (OSTI)

    Strachan, Denis M.; Scheele, Randall D.; Icenhower, Jonathan P.; Kozelisky, Anne E.; Sell, Richard L.; Legore, Virginia L.; Schaef, Herbert T.; O'Hara, Matthew J.; Brown, Christopher F.; Buchmiller, William C.

    2001-11-20T23:59:59.000Z

    Experiments have been on-going for about two years to determine the effects that radiation damage have on the physical and chemical properties of candidate titanate ceramics for the immobilization of plutonium. We summarize the results of these experiments in this document.

  13. Damage and plastic deformation of reservoir rocks

    E-Print Network [OSTI]

    Ze'ev, Reches

    Damage and plastic deformation of reservoir rocks: Part 2. Propagation of a hydraulic fracture Seth fracture and fault mechanics, fluid flow in fractured reservoirs, and geome- chanics in nonconventional the development of complex hydraulic fractures (HFs) that are commonly ob- served in the field and in experiments

  14. Gas condensate damage in hydraulically fractured wells

    E-Print Network [OSTI]

    Reza, Rostami Ravari

    2004-11-15T23:59:59.000Z

    of this research are a step forward in helping to improve the management of gas condensate reservoirs by understanding the mechanics of liquid build-up. It also provides methodology for quantifying the condensate damage that impairs linear flow of gas...

  15. Viscoelastic{Viscoplastic Damage Model for Asphalt Concrete

    E-Print Network [OSTI]

    Graham, Michael A.

    2010-10-12T23:59:59.000Z

    This thesis presents a continuum model for asphalt concrete incorporating non- linear viscoelasticity, viscoplasticity, mechanically-induced damage and moisture- induced damage. The Schapery single-integral viscoelastic model describes the nonlinear...

  16. Evaluation of moisture damage within asphalt concrete mixes 

    E-Print Network [OSTI]

    Shah, Brij D.

    2004-09-30T23:59:59.000Z

    as bond energy in order to predict moisture damage. Mixtures with the two types of bitumen and each aggregate with and without hydrated lime were evaluated. The hydrated lime substantially improved the resistance of the mixture to moisture damage....

  17. Damage analysis in asphalt concrete mixtures based on parameter relationships 

    E-Print Network [OSTI]

    Song, Injun

    2004-11-15T23:59:59.000Z

    Asphalt pavements experience damage due to traffic loading under various environmental conditions. Damage can be caused by viscopl microcracks, fracture due to fatigue cracking, or fracture due to thermal cracking. Asphalt ...

  18. Nonuniform radiation damage in permanent magnet quadrupoles

    SciTech Connect (OSTI)

    Danly, C. R.; Merrill, F. E.; Barlow, D.; Mariam, F. G. [Los Alamos National Laboratory, Los Alamos, New Mexico 87544 (United States)

    2014-08-15T23:59:59.000Z

    We present data that indicate nonuniform magnetization loss due to radiation damage in neodymium-iron-boron Halbach-style permanent magnet quadrupoles. The proton radiography (pRad) facility at Los Alamos uses permanent-magnet quadrupoles for magnifying lenses, and a system recently commissioned at GSI-Darmsdadt uses permanent magnets for its primary lenses. Large fluences of spallation neutrons can be produced in close proximity to these magnets when the proton beam is, intentionally or unintentionally, directed into the tungsten beam collimators; imaging experiments at LANL’s pRad have shown image degradation with these magnetic lenses at proton beam doses lower than those expected to cause damage through radiation-induced reduction of the quadrupole strength alone. We have observed preferential degradation in portions of the permanent magnet quadrupole where the field intensity is highest, resulting in increased high-order multipole components.

  19. Evaluation of radiation damage using nonlinear ultrasound

    SciTech Connect (OSTI)

    Matlack, K. H. [G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332 (United States); Wall, J. J. [G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332 (United States); Electric Power Research Institute, Charlotte, North Carolina 28262 (United States); Kim, J.-Y. [School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332 (United States); Qu, J. [Department of Civil and Environmental Engineering, Northwestern University, Evanston, Illinois 60208 (United States); Jacobs, L. J. [G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332 (United States); School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332 (United States); Viehrig, H.-W. [Department of Structural Materials, Helmholtz Zentrum Dresden-Rossendorf, Institute of Ion-Beam Physics and Materials Research, P.O. Box 510119, 01314 Dresden (Germany)

    2012-03-01T23:59:59.000Z

    Nonlinear ultrasound was used to monitor radiation damage in two reactor pressure vessel (RPV) steels. The microstructural changes associated with radiation damage include changes in dislocation density and the formation of precipitates, and nonlinear ultrasonic waves are known to be sensitive to such changes. Six samples each of two different RPV steels were previously irradiated in the Rheinsberg power reactor to two fluence levels, up to 10{sup 20} n/cm{sup 2} (E > 1 MeV). Longitudinal waves were used to measure the acoustic nonlinearity in these samples, and the results show a clear increase in the measured acoustic nonlinearity from the unirradiated state to the medium dose, and then a decrease from medium dose to high dose.

  20. Drill-in fluids control formation damage

    SciTech Connect (OSTI)

    Halliday, W.S. (Baker Hughes Inteq, Houston, TX (United States))

    1994-12-01T23:59:59.000Z

    Several factors led to development, oil company interest in, and use of payzone drilling fluids, including operator concern about maximizing well production, increasing acceptance of horizontal drilling and openhole completion popularity. This article discusses water-base drill-in'' fluid systems and applications. Payzone damage, including fine solids migration, clay swelling and solids invasion, reduces effective formation permeability, which results in lower production rates. Formation damage is often caused by invasion of normal drilling fluids that contain barite or bentonite. Drill-in systems are designed with special bridging agents to minimize invasion. Several bridging materials designed to form effective filter cake for instantaneous leak-off control can be used. Bridging materials are also designed to minimize stages and time required to clean up wells before production. Fluids with easy-to-remove bridging agents reduce completion costs. Drill-in fluid bridging particles can often be removed more thoroughly than those in standard fluids.

  1. Carbon Fiber Damage in Particle Beam

    E-Print Network [OSTI]

    Dehning, B; Kroyer, T; Meyer, M; Sapinski, M

    2011-01-01T23:59:59.000Z

    Carbon fibers are commonly used as moving targets in beam wire scanners. The heating of the fiber due to energy loss of the particles travelling through is simulated with Geant4. The heating induced by the beam electromagnetic field is estimated with ANSYS. The heat transfer and sublimation processes are modelled. Due to the model nonlinearity, a numerical approach based on discretization of the wire movement is used to solve it for particular beams. Radiation damage to the fiber is estimated with SRIM. The model is tested with available SPS and LEP data and a dedicated damage test on the SPS beam is performed followed by a post-mortem analysis of the wire remnants. Predictions for the LHC beams are made.

  2. Cellular responses to environmental DNA damage

    SciTech Connect (OSTI)

    Not Available

    1994-08-01T23:59:59.000Z

    This volume contains the proceedings of the conference entitled Cellular Responses to Environmental DNA Damage held in Banff,Alberta December 1--6, 1991. The conference addresses various aspects of DNA repair in sessions titled DNA repair; Basic Mechanisms; Lesions; Systems; Inducible Responses; Mutagenesis; Human Population Response Heterogeneity; Intragenomic DNA Repair Heterogeneity; DNA Repair Gene Cloning; Aging; Human Genetic Disease; and Carcinogenesis. Individual papers are represented as abstracts of about one page in length.

  3. Saga of Glass Damage in Urban Environments Continues

    E-Print Network [OSTI]

    Kareem, Ahsan

    Saga of Glass Damage in Urban Environments Continues: Consequences of Aerodynamics and Debris Laboratory University of Notre Dame The Saga of Glass Damage in Urban Environments Continues: Consequences east of the city of Houston. Initial reconnaissance suggested that the observed glass/cladding damage

  4. Assessing Hail and Freeze Damage to Field Corn and Sorghum

    E-Print Network [OSTI]

    Livingston, Stephen

    1995-11-30T23:59:59.000Z

    When a crop has been damaged by hail, it is important to be able to gauge the extent of the damage, the potential for recovery of the damaged crop, and the actions that might be necessary to maximize the recovery process. This publication tells how...

  5. Ice Storm Damage Greater Along the Terrestrial-Aquatic Interface

    E-Print Network [OSTI]

    Kraft, Clifford E.

    Ice Storm Damage Greater Along the Terrestrial-Aquatic Interface in Forested Landscapes Andrew A- tems. In 1998, a severe ice storm damaged over ten million hectares of forest across northern New York investigated the spatial arrangement of forest damage at the terrestrial-aquatic interface, an ecological edge

  6. Tensile damage response from discrete element virtual testing

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Tensile damage response from discrete element virtual testing A. DELAPLACE LMT-Cachan, ENS Cachan conditions on brittle materials, damage can generally not be re- duced to a simple scalar. Microcrack into account the damage anisotropy in phenomenological models is a possible option, but the identification

  7. Probabilistic Damage Detection Based on Large Area Electronics Sensing Sheets

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Probabilistic Damage Detection Based on Large Area Electronics Sensing Sheets Yao Yao and Branko-stage damage detection and characterization requires continuous sensing over large areas of structure are not sensitive to damage. In this research, a probabilistic approach based on Monte Carlo (MC) simulations

  8. Photogrammetry Assisted Rapid Measurement of Earthquake-Induced Building Damage

    E-Print Network [OSTI]

    Kamat, Vineet R.

    Photogrammetry Assisted Rapid Measurement of Earthquake-Induced Building Damage Fei Dai, PhD Hong for rapidly measuring structural damage induced in tall buildings by seismic events such as earthquakes) sustained at key floors along the edge of a damaged building. The measured drift can then be used to compute

  9. DAMAGE AND ROCKVOLATILE MIXTURE EFFECTS ON IMPACT CRATER FORMATION

    E-Print Network [OSTI]

    Stewart, Sarah T.

    DAMAGE AND ROCK­VOLATILE MIXTURE EFFECTS ON IMPACT CRATER FORMATION JOHN D. O'KEEFE, SARAH T models for material damage, dilatancy, and inhomogeneous materials (mixtures). We found that a strength degradation (damage) model was necessary to produce faulting in homogeneous materials. Both normal and thrust

  10. DAMAGE LOCALIZATION IN PLATES USING DLVs Dionisio Bernal1

    E-Print Network [OSTI]

    Bernal, Dionisio

    DAMAGE LOCALIZATION IN PLATES USING DLVs Dionisio Bernal1 and Ariel Levy2 Department of Civil Associate Professor, 2 Graduate Student ABSTRACT The performance of a technique to localize damage based on the computation of load vectors that create stress fields that bypass the damaged region is investigated

  11. A BAYESIAN PROBABILISTIC APPROACH TO DAMAGE DETECTION FOR CIVIL

    E-Print Network [OSTI]

    Stanford University

    damage or other environmental e ects. Results based on the eld vibration test of a bridge indicate on the vibration parameters can be di erentiated from other environmental e ects or potential structural damage. vA BAYESIAN PROBABILISTIC APPROACH TO DAMAGE DETECTION FOR CIVIL STRUCTURES a dissertation submitted

  12. Analysis on a Fractal Set

    E-Print Network [OSTI]

    Santanu Raut; Dhurjati Prasad Datta

    2010-01-10T23:59:59.000Z

    The formulation of a new analysis on a zero measure Cantor set $C (\\subset I=[0,1])$ is presented. A non-archimedean absolute value is introduced in $C$ exploiting the concept of {\\em relative} infinitesimals and a scale invariant ultrametric valuation of the form $\\log_{\\varepsilon^{-1}} (\\varepsilon/x) $ for a given scale $\\varepsilon>0$ and infinitesimals $0set, if it exists. The formulation of a scale invariant real analysis is also outlined, when the singleton $\\{0\\}$ of the real line $R$ is replaced by a zero measure Cantor set. The Cantor function is realised as a locally constant function in this setting. The ordinary derivative $dx/dt$ in $R$ is replaced by the scale invariant logarithmic derivative $d\\log x/d\\log t$ on the set of valued infinitesimals. As a result, the ordinary real valued functions are expected to enjoy some novel asymptotic properties, which might have important applications in number theory and in other areas of mathematics.

  13. An analysis of the kinetics of thermal damage and movement of damage front in laser irradiated egg white 

    E-Print Network [OSTI]

    Azeemi, Aamer Amjed

    1993-01-01T23:59:59.000Z

    Some of the major applications of laser surgery involve the photocoagulation of diseased tissue, with minimal or no damage to the surrounding healthy tissue. There is a growing need for a model for the quantification of thermal damage. The models...

  14. An analysis of the kinetics of thermal damage and movement of damage front in laser irradiated egg white

    E-Print Network [OSTI]

    Azeemi, Aamer Amjed

    1993-01-01T23:59:59.000Z

    Some of the major applications of laser surgery involve the photocoagulation of diseased tissue, with minimal or no damage to the surrounding healthy tissue. There is a growing need for a model for the quantification of thermal damage. The models...

  15. DNA repair decline during mouse spermiogenesis results in the accumulation of heritable DNA damage

    E-Print Network [OSTI]

    Marchetti, Francesco

    2008-01-01T23:59:59.000Z

    male germ cells handle DNA damage? Toxicol. Appl. Pharmacol.strand breaks and DNA base damage at different cellularrelationship to genetic damage, Mutat. Res. 216 (1989) 221-

  16. Abdominal damage control surgery and reconstruction: world society of emergency surgery position paper

    E-Print Network [OSTI]

    Godat, Laura; Kobayashi, Leslie; Costantini, Todd; Coimbra, Raul

    2013-01-01T23:59:59.000Z

    as: Godat et al. : Abdominal damage control surgery andAD, Feliciano DV: Trauma damage control. In Trauma. 6thpatient which indicate damage control and predict outcome.

  17. Mechanical Damage from Cavitation in High Intensity Focused Ultrasound Accelerated Thrombolysis

    E-Print Network [OSTI]

    Weiss, Hope

    2012-01-01T23:59:59.000Z

    Mechanical Damage . . . . . . . . . . . . . . . . . .iiiMethod for Estimation of Cavitation Damage for an EmbeddedMethod for Estimation of Cavitation Damage for an Embedded

  18. Damage, Fear, and Transformation: International Currency Systems and Postwar Japan's Currency Policies

    E-Print Network [OSTI]

    Lee, Sangbaik

    2012-01-01T23:59:59.000Z

    will suffer a serious damage. ” 291 Above, we have surveyedparticularly for alleviating the damage incurred by the yenDamage, Fear, and Transformation: International Currency

  19. Damage Identification of a Composite Beam Using Finite Element Model Updating

    E-Print Network [OSTI]

    Moaveni, Babak; He, Xianfei; Conte, Joel P; De Callafon, Raymond A.

    2008-01-01T23:59:59.000Z

    Shevitz, D. W. (1996), Damage identification in structuresreview of vibration-based damage identification methods, TheM. , & Samman, M. M. (1991), Damage detection from changes

  20. DNA Repair Decline During Mouse Spermiogenesis Results in the Accumulation of Heritable DNA Damage

    E-Print Network [OSTI]

    Marchetti, Francesco

    2008-01-01T23:59:59.000Z

    male germ cells handle DNA damage? Toxicol. Appl. Pharmacol.strand breaks and DNA base damage at different cellularrelationship to genetic damage, Mutat. Res. 216 (1989) 221-

  1. Micromechanical modeling of short glass-fiber reinforced thermoplastics-Isotropic damage of pseudograins

    SciTech Connect (OSTI)

    Kammoun, S.; Brassart, L.; Doghri, I.; Delannay, L. [Universite catholique de Louvain, institute of Mechanics, Materials and Civil Engineering (iMMC), 4, av. G. Lemaitre, B-1348 Louvain-la-Neuve (Belgium); Robert, G. [Rhodia Engineering Plastics, Avenue Ramboz, B.P. 64, 69192 Saint-FONS Cedex (France)

    2011-05-04T23:59:59.000Z

    A micromechanical damage modeling approach is presented to predict the overall elasto-plastic behavior and damage evolution in short fiber reinforced composite materials. The practical use of the approach is for injection molded thermoplastic parts reinforced with short glass fibers. The modeling is proceeded as follows. The representative volume element is decomposed into a set of pseudograins, the damage of which affects progressively the overall stiffness and strength up to total failure. Each pseudograin is a two-phase composite with aligned inclusions having same aspect ratio. A two-step mean-field homogenization procedure is adopted. In the first step, the pseudograins are homogenized individually according to the Mori-Tanaka scheme. The second step consists in a self-consistent homogenization of homogenized pseudograins. An isotropic damage model is applied at the pseudograin level. The model is implemented as a UMAT in the finite element code ABAQUS. Model is shown to reproduce the strength and the anisotropy (Lankford coefficient) during uniaxial tensile tests on samples cut under different directions relative to the injection flow direction.

  2. Surface state reconstruction in ion-damaged SmB?

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wakeham, N.; Wang, Y. Q.; Fisk, Z.; Ronning, F.; Thompson, J. D.

    2015-02-01T23:59:59.000Z

    We have used ion-irradiation to damage the (001) surfaces of SmB? single crystals to varying depths, and have measured the resistivity as a function of temperature for each depth of damage. We observe a reduction in the residual resistivity with increasing depth of damage. Our data are consistent with a model in which the surface state is not destroyed by the ion-irradiation, but instead the damaged layer is poorly conducting and the initial surface state is reconstructed below the damage. This behavior is consistent with a surface state that is topologically protected.

  3. Problem Set 3 Let's Simplex

    E-Print Network [OSTI]

    Chen, Yiling

    Problem Set 3 Let's Simplex Applied Mathematics 121 -- Spring 2011 Due 5:00 PM, Friday, February 18 linear programs using the Simplex method. Second, you will get a better understanding of linear programming through a better understanding of the Simplex method. Contents 1 Making it rain 2 2 Simplex

  4. Problem Set 3 Let's Simplex

    E-Print Network [OSTI]

    Chen, Yiling

    Problem Set 3 Let's Simplex AM121/ES121 -- Fall 2014 Due 5:00 PM, Tuesday, September 30, 2014 linear programs using the Simplex method. Second, you will get a better understanding of linear programming through a better understanding of the Simplex method. Contents 1 Making it rain 3 2 Simplex

  5. Problem Set 3 Let's Simplex

    E-Print Network [OSTI]

    Chen, Yiling

    Problem Set 3 Let's Simplex Applied Mathematics 121 -- Spring 2014 Due 5:00 PM, Friday, February 21 practice solving linear programs using the Simplex method. Second, you will get a better understanding of linear programming through a better understanding of the Simplex method. Contents 1 Making it rain 3 2

  6. Damage of MEMS thermal actuators heated by laser irradiation.

    SciTech Connect (OSTI)

    Walraven, Jeremy Allen; Klody, Kelly Anne; Sackos, John T.; Phinney, Leslie Mary

    2004-11-01T23:59:59.000Z

    Optical actuation of microelectromechanical systems (MEMS) is advantageous for applications for which electrical isolation is desired. Thirty-two polycrystalline silicon opto-thermal actuators, optically-powered MEMS thermal actuators, were designed, fabricated, and tested. The design of the opto-thermal actuators consists of a target for laser illumination suspended between angled legs that expand when heated, providing the displacement and force output. While the amount of displacement observed for the opto-thermal actuators was fairly uniform for the actuators, the amount of damage resulting from the laser heating ranged from essentially no damage to significant amounts of damage on the target. The likelihood of damage depended on the target design with two of the four target designs being more susceptible to damage. Failure analysis of damaged targets revealed the extent and depth of the damage.

  7. Damage of MEMS thermal actuators heated by laser irradiation.

    SciTech Connect (OSTI)

    Walraven, Jeremy Allen; Klody, Kelly Anne; Sackos, John T.; Phinney, Leslie Mary

    2005-01-01T23:59:59.000Z

    Optical actuation of microelectromechanical systems (MEMS) is advantageous for applications for which electrical isolation is desired. Thirty-two polycrystalline silicon opto-thermal actuators, optically-powered MEMS thermal actuators, were designed, fabricated, and tested. The design of the opto-thermal actuators consists of a target for laser illumination suspended between angled legs that expand when heated, providing the displacement and force output. While the amount of displacement observed for the opto-thermal actuators was fairly uniform for the actuators, the amount of damage resulting from the laser heating ranged from essentially no damage to significant amounts of damage on the target. The likelihood of damage depended on the target design with two of the four target designs being more susceptible to damage. Failure analysis of damaged targets revealed the extent and depth of the damage.

  8. Minimizing radiation damage in nonlinear optical crystals

    DOE Patents [OSTI]

    Cooke, D. Wayne (Santa Fe, NM); Bennett, Bryan L. (Los Alamos, NM); Cockroft, Nigel J. (Santa Fe, NM)

    1998-01-01T23:59:59.000Z

    Methods are disclosed for minimizing laser induced damage to nonlinear crystals, such as KTP crystals, involving various means for electrically grounding the crystals in order to diffuse electrical discharges within the crystals caused by the incident laser beam. In certain embodiments, electrically conductive material is deposited onto or into surfaces of the nonlinear crystals and the electrically conductive surfaces are connected to an electrical ground. To minimize electrical discharges on crystal surfaces that are not covered by the grounded electrically conductive material, a vacuum may be created around the nonlinear crystal.

  9. Minimizing radiation damage in nonlinear optical crystals

    DOE Patents [OSTI]

    Cooke, D.W.; Bennett, B.L.; Cockroft, N.J.

    1998-09-08T23:59:59.000Z

    Methods are disclosed for minimizing laser induced damage to nonlinear crystals, such as KTP crystals, involving various means for electrically grounding the crystals in order to diffuse electrical discharges within the crystals caused by the incident laser beam. In certain embodiments, electrically conductive material is deposited onto or into surfaces of the nonlinear crystals and the electrically conductive surfaces are connected to an electrical ground. To minimize electrical discharges on crystal surfaces that are not covered by the grounded electrically conductive material, a vacuum may be created around the nonlinear crystal. 5 figs.

  10. Radiation damage by neutrons to plastic scintillators

    SciTech Connect (OSTI)

    Buss, G.; Dannemann, A.; Holm, U.; Wick, K. [Univ. Hamburg (Germany). Inst. fuer Experimentalphysik] [Univ. Hamburg (Germany). Inst. fuer Experimentalphysik

    1995-08-01T23:59:59.000Z

    Polystyrene based scintillator SCSN38, wavelength shifter Y7 with polymethylmethacrylate matrix and pure PM-MA light guide GS218 have been irradiated in the mixed radiation field of a pool reactor. About 77% of the dose released in SCSN38 was caused by the {gamma}-field, 23% by fast neutrons. The total dose ranged from 2 to 105 kGy. The dose measurements were made using alanine dosimeters. Transmission and fluorescence of the samples have been measured before and several times after irradiation. The radiation damage results shown o differences to irradiations in pure {gamma}-fields with corresponding released doses.

  11. System and damage identification of civil structures

    E-Print Network [OSTI]

    Moaveni, Babak

    2007-01-01T23:59:59.000Z

    al. , 2006). A full factorial design of experiments is usedfactors set at all levels is called a full factorial design.A full factorial design is used in this study, therefore a

  12. Optical set-reset latch

    DOE Patents [OSTI]

    Skogen, Erik J.

    2013-01-29T23:59:59.000Z

    An optical set-reset (SR) latch is formed from a first electroabsorption modulator (EAM), a second EAM and a waveguide photodetector (PD) which are arranged in an optical and electrical feedback loop which controls the transmission of light through the first EAM to latch the first EAM in a light-transmissive state in response to a Set light input. A second waveguide PD controls the transmission of light through the second EAM and is used to switch the first EAM to a light-absorptive state in response to a Reset light input provided to the second waveguide PD. The optical SR latch, which may be formed on a III-V compound semiconductor substrate (e.g. an InP or a GaAs substrate) as a photonic integrated circuit (PIC), stores a bit of optical information and has an optical output for the logic state of that bit of information.

  13. ORAL QUAL SYLLABUS: SET THEORY; ERGODIC THEORY

    E-Print Network [OSTI]

    ORAL QUAL SYLLABUS: SET THEORY; ERGODIC THEORY SAMUEL COSKEY Set Theory. #15; Basic set theory's theorem { there exists an Aronsajn tree { Shanin's root system lemma (#2;2) #15; Descriptive set theory of set theory (Jech 12,13) { Mostowski's collapsing theorem { relativization and absolute formulas { re

  14. New approach to overcoming formation damage caused by extreme overbalance in mature field

    SciTech Connect (OSTI)

    Welch, J.C.; Haymes, R.D. [Baker Hughes INTEQ, Houston, TX (United States)

    1998-12-31T23:59:59.000Z

    When developing a mature field, operators are often faced with completion operations in depleted zones. Low bottom hole pressures in these zones make completion operations difficult and formation damage becomes a primary concern. The depleted reservoir referred to in this paper was drilled in a filter cake that effectively plugged the wellbore. The low bottom hole pressure in the pay zone precluded the use of an underreamer to remove the damage. Instead, a special jetting tool was designed and implemented to wash away the damaging filter cake before using a gravel pack completion. A laboratory investigation was undertaken to qualify a reservoir drill-in fluid for use with a jetting tool. The specific objective of the laboratory study was to demonstrate the selected drill-in fluid would simultaneously scour away the skin damage left by the drilling fluid, enlarge the wellbore without underreaming, and deposit a new, thin, impermeable, nondamaging filter cake that would remain in place while gravel packing the production zone. Because of very high overburden pressures, the drill-in fluid had to be designed to quickly seal the depleted zones during the jetting process and be easily removed with low production pressures. Specialized return gas permeability tests were conducted to verify the non-damaging character of the drilling fluid. After producing satisfactory laboratory results, the system was tried in the field. The jetting operation was completed, the hole was displaced with brine, and the gravel pack assembly set in the production zone. The production resulting from the jetting operation described in this paper, exceeded the replaced well and is producing gas on par with the best producing wells in the field.

  15. Radiation Damage Study for PHENIX Silicon Stripixel Sensors

    E-Print Network [OSTI]

    J. Asai; S. Batsouli; K. Boyle; V. Castillo; V. Cianciolo; D. Fields; C. Haegeman; M. Hoeferkamp; Y. Hosoi; R. Ichimiya; Y. Inoue; M. Kawashima; T. Komatsubara; K. Kurita; Z. Li; D. Lynch; M. Nguyen; T. Murakami; R. Nouicer; H. Ohnishi; R. Pak; K. Sakashita; T. -A. Shibata; K. Suga; A. Taketani; J. Tojo

    2007-10-14T23:59:59.000Z

    Silicon stripixel sensors which were developed at BNL will be installed as part of the RHIC-PHENIX silicon vertex tracker (VTX). RHIC II operations provide luminosity up to 2x10^32 /cm2/s so the silicon stripixel sensors will be exposed to a significant amount of radiation. The most problematic radiation effect for VTX is the increase of leakage current, which degrades the signal to noise ratio and may saturate the readout electronics. We studied the radiation damage using the same diodes as CERN-RD48. First, the proportionality between the irradiation fluence and the increase of leakage current of CERN-RD48 was reproduced. Then beam experiments with stripixel sensor were done in which leakage current was found to increase in the same way as that of thereference diode. A stripixel sensor was also irradiated at the PHENIX interaction region (IR) during the 2006 run. We found the same relation between the integrated luminosity and determined fluence from increase of leakage current. The expected fluence is 3-6x10^12 Neq/cm2 (1 MeV neutron equivalent) in RHIC II operations for 10 years. Due to this expected exposure, setting the operating temperature in PHENIX to T< 0 deg. C to suppress leakage current is needed to avoid saturation of preamplifiers.

  16. Synchrotron radiation damage observations in normal incidence copper mirrors

    SciTech Connect (OSTI)

    Takacs, P.Z.; Melendez, J.; Colbert, J.

    1985-08-01T23:59:59.000Z

    Water-cooled copper mirrors used at near-normal incidence on two beam lines at the NSLS are observed to undergo severe degradation upon exposure to the direct SR beam. These mirrors are used on beam lines designed to utilize radiation in the wavelength regions longer than 100 nm and are coated with a uv reflection-enhancing coating, consisting of one or more bilayers of aluminum with a MgF/sub 2/ overcoat. Beamline performance degrades very rapidly following installation of a new set of mirrors. Analysis of the mirror surfaces by various non-destructive techniques indicates severe degradation of the coating and surface along the central strip where most of the x-ray power is absorbed from the beam. In one case where the mirror had three bilayer coatings, the outer coating layer has disappeared along the central strip. Rutherford backscatter measurements indicate compositional changes between layers and confirm the existence of a carbon deposit on the surface. Thermal modeling suggests that most of the damage is caused by direct photon interaction, since the temperature rise in the energy deposition region is small.

  17. Damage from the impacts of small asteroids

    SciTech Connect (OSTI)

    Hills, J.G.; Goda, M.P.

    1996-08-15T23:59:59.000Z

    The fragmentation of a small asteroid in the atmosphere greatly increases its aerodynamic drag and rate of energy dissipation. The differential atmospheric pressure across it disperses its fragments at a velocity that increases with atmospheric density and impact velocity and decreases with asteroid density. Extending our previous work, we use a spherical atmosphere and a fitted curve to its density profile to find the damage done by an asteroid entering the atmosphere at various zenith angles. In previous work we estimated the blast damage by scaling from data on nuclear explosions in the atmosphere during the 1940s, 1950s and early 1960s. This underestimated the blast from asteroid impacts because nuclear fireballs radiate away a larger fraction of their energy than do meteors, so less of their energy goes into the blast wave. We have redone the calculations to allow for this effect. We have found the area of destruction around the impact point in which the over pressure in the blast wave exceeds 4 pounds/inch{sup 2} = 2.8 X 10{sup 5} dynes/cm{sup 3}, which is enough to knock over trees and destroy buildings. About every 100 years an impactor should blast an area of 300 km{sup 2} or more somewhere on the land area of Earth. The optical flux from asteroids 60 meters or more in diameter is enough to ignite pine forests. However, the blast from an impacting asteroid goes beyond the radius within which the fire starts. It tends to blow out the fire, so it is likely that the impact will char the forest (as at Tunguska), but it will not produce a sustained fire. Because of the atmosphere, asteroids less than about 200 m in diameter are not effective in producing craters and earthquakes. They are also not effective in producing water waves and tsunami in ocean impacts. Tsunami is probably the most devastating type of damage for asteroids that are between 200 meters and 1 km in diameter.

  18. Set Multicover The Set Multicover problem is the same as set cover except

    E-Print Network [OSTI]

    Golin, Mordecai J.

    during that step. Notice that the average cost can not decrease. Then 8e 2 U price(e; 1) Ÿ price(e; 2) Ÿ to be covered a specified number of times. That is we want to pick a minimum­cost set cover such that element e algorithm to multi­ cover A Greedy MultiCover algorithm U / X C / ; select a F 2 F that minimizes Cost(F ) j

  19. Set Multicover The Set Multicover problem is the same as set cover except

    E-Print Network [OSTI]

    Golin, Mordecai J.

    price(e; j) = Cost(F ) jF ``U j If j = r e remove e from U: return(C) This algorithm is very similar during that step. Notice that the average cost can not decrease. Then 8e 2 U price(e; 1) Ÿ price(e; 2) Ÿ to be covered a specified number of times. That is we want to pick a minimum­cost set cover such that element e

  20. Discrete Sets of Singular Cardinality

    E-Print Network [OSTI]

    Fleissner, William G.

    1983-08-02T23:59:59.000Z

    singular cardinal k and a closed, cofinal in k, set of cardinals, {kb: ß «,. Throughout this paper, Y will be a discrete subset of a space X with | Y \\ = k. We say that t? = (Aß)ß...

  1. Tectonic Settings | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f <Maintained ByManagement Inc Place: Cleveland, Ohio Zip:Settings

  2. Berkeley Lab Compact Accelerator Sets World Record

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Berkeley Lab Particle Accelerator Sets World Record Berkeley Lab Particle Accelerator Sets World Record Simulations at NERSC Help Validate Experimental Laser-Plasma Design December...

  3. Damage detection in initially nonlinear systems

    SciTech Connect (OSTI)

    Bornn, Luke [Los Alamos National Laboratory; Farrar, Charles [Los Alamos National Laboratory; Park, Gyuhae [Los Alamos National Laboratory

    2009-01-01T23:59:59.000Z

    The primary goal of Structural Health Monitoring (SHM) is to detect structural anomalies before they reach a critical level. Because of the potential life-safety and economic benefits, SHM has been widely studied over the past decade. In recent years there has been an effort to provide solid mathematical and physical underpinnings for these methods; however, most focus on systems that behave linearly in their undamaged state - a condition that often does not hold in complex 'real world' systems and systems for which monitoring begins mid-lifecycle. In this work, we highlight the inadequacy of linear-based methodology in handling initially nonlinear systems. We then show how the recently developed autoregressive support vector machine (AR-SVM) approach to time series modeling can be used for detecting damage in a system that exhibits initially nonlinear response. This process is applied to data acquired from a structure with induced nonlinearity tested in a laboratory environment.

  4. Radiation Damage in Polarized Ammonia Solids

    E-Print Network [OSTI]

    K. Slifer

    2007-11-28T23:59:59.000Z

    Solid NH3 and ND3 provide a highly polarizable, radiation resistant source of polarized protons and deuterons and have been used extensively in high luminosity experiments investigating the spin structure of the nucleon. Over the past twenty years, the UVA polarized target group has been instrumental in producing and polarizing much of the material used in these studies, and many practical considerations have been learned in this time. In this discussion, we analyze the polarization performance of the solid ammonia targets used during the recent JLab Eg4 run. Topics include the rate of polarization decay with accumulated charge, the annealing procedure for radiation damaged targets to recover polarization, and the radiation induced change in optimum microwave frequency used to polarize the sample. We also discuss the success we have had in implementing frequency modulation of the polarizing microwave frequency.

  5. Thermal Decomposition of Radiation-Damaged Polystyrene

    SciTech Connect (OSTI)

    Abrefah, John; Klinger, George S.

    2000-09-26T23:59:59.000Z

    The radiation-damaged polystyrene (given the identification name of 'polycube') was fabricated by mixing high-density polystyrene material ("Dylene Fines # 100") with plutonium and uranium oxides. The polycubes were used in the 1960s for criticality studies during processing of spent nuclear fuel. The polycubes have since been stored for almost 40 years at the Hanford Plutonium Finishing Plant (PFP) after failure of two processes to reclaim the plutonium and uranium oxides from the polystyrene matrix. Thermal decomposition products from this highly cross-linked polystyrene matrix were characterized using Gas Chromatograph/Mass Spectroscopy (GC/MS) system coupled to a horizontal furnace. The decomposition studies were performed in air and helium atmospheres at about 773 K. The volatile and semi-volatile organic products for the radiation-damaged polystyrene were different compared to virgin polystyrene. The differences were in the number of organic species generated and their concentrations. In the inert (i.e., helium) atmosphere, the major volatile organic products identified (in order of decreasing concentrations) were styrene, benzene, toluene, ethylbenzene, xylene, nathphalene, propane, .alpha.-methylbenzene, indene and 1,2,3-trimethylbenzene. But in air, the major volatile organic species identified changed slightly. Concentrations of the organic species in the inert atmosphere were significantly higher than those for the air atmosphere processing. Overall, 38 volatile organic species were identified in the inert atmosphere compared to 49 species in air. Twenty of the 38 species in the inert conditions were also products in the air atmosphere. Twenty-two oxidized organic products were identified during thermal processing in air.

  6. assessing tubal damage: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    State University, Deborah French, Applied Sciences Associates, Bruce Wright 5 Natural Resource Damage Assessment for the Deepwater BP Oil Spill Environmental Sciences and...

  7. Demonstration of damage with a wireless sensor network

    SciTech Connect (OSTI)

    Tanner, Neal A.; Farrar, C. R. (Charles R.)

    2001-01-01T23:59:59.000Z

    A damage detection system was developed with commercially available wireless sensors. Statistical process control methods were used to monitor the correlation of vibration data from two accelerometers mounted across a joint. Changes in correlation were used to detect damage to the joint. All data processing was done remotely on a microprocessor integrated with the wireless sensors to allow for the transmission of a simple damaged or undamaged status for each monitored joint. Additionally, a portable demonstration structure was developed to showcase the capabilities of the damage detection system to monitor joint failure in real time.

  8. Poroelastic damage rheology: Dilation, compaction, and failure of rocks

    E-Print Network [OSTI]

    Lyakhovsky, Vladimir

    Poroelastic damage rheology: Dilation, compaction, and failure of rocks Yariv Hamiel Institute December 2004; Published 26 January 2005. Hamiel, Y., V. Lyakhovsky, and A. Agnon (2005), Poroelastic

  9. Convention on Supplementary Compensation for Nuclear Damage Contingent...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Allocation, Section 934 Convention on Supplementary Compensation for Nuclear Damage Contingent Cost Allocation, Section 934 LES comments in response to Notice of Inquiry on...

  10. Thermomechanics of damage and fatigue by a phase field model

    E-Print Network [OSTI]

    Giovambattista Amendola; Mauro Fabrizio

    2014-10-26T23:59:59.000Z

    In the paper we present an isothermal model for describing damage and fatigue by the use of the Ginzburg-Landau (G-L) equation. Fatigue produces progressive damage, which is related with a variation of the internal structure of the material. The G-L equation studies the evolution of the order parameter, which describes the constitutive arrangement of the system and, in this framework, the evolution of damage. The thermodynamic coherence of the model is proved. In the last part of the work, we extend the results of the paper to a non-isothermal system, where fatigue contains thermal effects, which increase the damage of materials.

  11. IN VITRO MUTAGENIC AND DNA AND CHROMOSOMAL DAMAGE ACTIVITY BY...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    IN VITRO MUTAGENIC AND DNA AND CHROMOSOMAL DAMAGE ACTIVITY BY SURFACTANT DISPERSION OR SOLVENT EXTRACT OF A REFERENCE DIESEL EXHAUST PARTICULATE MATERIAL IN VITRO MUTAGENIC AND DNA...

  12. Damage Detection and Characterization in Smart Material Structures \\Lambda y

    E-Print Network [OSTI]

    ­maps'' as done in the thermal based tomography techniques of [BK1, BK2, BKW] wherein the damaged physical domain

  13. attack damage due: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cell damage extent due to irradiation with nanosecond laser pulses under cell culturing medium and dry environment Engineering Websites Summary: Autnoma de Mxico; Av....

  14. alkaloid damages dna: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    damage may not only reduce the number of amplifiable template molecules, but may also lead to the generation of erroneous sequence information. A qualitative and quantitative...

  15. assessing dna damage: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    damage may not only reduce the number of amplifiable template molecules, but may also lead to the generation of erroneous sequence information. A qualitative and quantitative...

  16. affects dna damage: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    damage may not only reduce the number of amplifiable template molecules, but may also lead to the generation of erroneous sequence information. A qualitative and quantitative...

  17. alternative dna damage: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    damage may not only reduce the number of amplifiable template molecules, but may also lead to the generation of erroneous sequence information. A qualitative and quantitative...

  18. acari eriophyidae damage: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    resistant to particle beams. Their strength deteriorates with time due to radiation damage and low-cycle thermal fatigue. In case of high intensity beams this process can...

  19. aeroengines surface damage: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    composition is compatible with a collisional sputtering model. At lower of radiation damage at oxide surfaces, induced by inert gas ions with energies typical of sputter...

  20. TREATMENT OF HYDROCARBON, ORGANIC RESIDUE AND PRODUCTION CHEMICAL DAMAGE MECHANISMS THROUGH THE APPLICATION OF CARBON DIOXIDE IN NATURAL GAS STORAGE WELLS

    SciTech Connect (OSTI)

    Lawrence J. Pekot

    2004-06-30T23:59:59.000Z

    Two gas storage fields were studied for this project. Overisel field, operated by Consumer's Energy, is located near the town of Holland, Michigan. Huntsman Storage Unit, operated by Kinder Morgan, is located in Cheyenne County, Nebraska near the town of Sidney. Wells in both fields experienced declining performance over several years of their annual injection/production cycle. In both fields, the presence of hydrocarbons, organic materials or production chemicals was suspected as the cause of progressive formation damage leading to the performance decline. Core specimens and several material samples were collected from these two natural gas storage reservoirs. Laboratory studies were performed to characterize the samples that were believed to be representative of a reservoir damage mechanism previously identified as arising from the presence of hydrocarbons, organic residues or production chemicals. A series of laboratory experiments were performed to identify the sample materials, use these materials to damage the flow capacity of the core specimens and then attempt to remove or reduce the induced damage using either carbon dioxide or a mixture of carbon dioxide and other chemicals. Results of the experiments showed that pure carbon dioxide was effective in restoring flow capacity to the core specimens in several different settings. However, in settings involving asphaltines as the damage mechanism, both pure carbon dioxide and mixtures of carbon dioxide and other chemicals provided little effectiveness in damage removal.

  1. Electromagnetic field limits set by the V-Curve.

    SciTech Connect (OSTI)

    Warne, Larry Kevin; Jorgenson, Roy Eberhardt; Hudson, Howard Gerald

    2014-07-01T23:59:59.000Z

    When emitters of electromagnetic energy are operated in the vicinity of sensitive components, the electric field at the component location must be kept below a certain level in order to prevent the component from being damaged, or in the case of electro-explosive devices, initiating. The V-Curve is a convenient way to set the electric field limit because it requires minimal information about the problem configuration. In this report we will discuss the basis for the V-Curve. We also consider deviations from the original V-Curve resulting from inductive versus capacitive antennas, increases in directivity gain for long antennas, decreases in input impedance when operating in a bounded region, and mismatches dictated by transmission line losses. In addition, we consider mitigating effects resulting from limited antenna sizes.

  2. BASIS Set Exchange (BSE): Chemistry Basis Sets from the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL) Basis Set Library

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Feller, D; Schuchardt, Karen L.; Didier, Brett T.; Elsethagen, Todd; Sun, Lisong; Gurumoorthi, Vidhya; Chase, Jared; Li, Jun

    The Basis Set Exchange (BSE) provides a web-based user interface for downloading and uploading Gaussian-type (GTO) basis sets, including effective core potentials (ECPs), from the EMSL Basis Set Library. It provides an improved user interface and capabilities over its predecessor, the EMSL Basis Set Order Form, for exploring the contents of the EMSL Basis Set Library. The popular Basis Set Order Form and underlying Basis Set Library were originally developed by Dr. David Feller and have been available from the EMSL webpages since 1994. BSE not only allows downloading of the more than 200 Basis sets in various formats; it allows users to annotate existing sets and to upload new sets. (Specialized Interface)

  3. Contagious Sets in Random Graphs Uriel Feige

    E-Print Network [OSTI]

    Contagious Sets in Random Graphs Uriel Feige Michael Krivelevich Daniel Reichman August 10, 2014. A contagious set is a set whose activation results with the entire graph being active. Given a graph G, let m(G, 2) be the minimal size of a contagious set. We consider the binomial random graph G := G(n, p

  4. Math 566: Axiomatic Set Theory Spring 2009

    E-Print Network [OSTI]

    Basic Set Theory Definition (Axiom of Choice (AC)). If F is a family of non-empty sets, then thereMath 566: Axiomatic Set Theory Spring 2009 Professor: Simon Thomas Note-taker: Jay Williams #12;Contents 1 Basic Set Theory 3 1.1 The ordinals

  5. Answers to the set revision exercise 1 Answers to the set revision exercise

    E-Print Network [OSTI]

    Alechina, Natasha

    to the set revision exercise 5 Answers to the set revision exercise · If A has k elements, how many different1 Answers to the set revision exercise 1 Answers to the set revision exercise · Are A = {1 in which they are listed does not matter. Answers to the set revision exercise 2 Answers to the set

  6. Laboratory evaluation of damage criteria and permeability of Big Hill salt.

    SciTech Connect (OSTI)

    Ehgartner, Brian L.; Park, Byoung Yoon; Lee, Moo Yul; Bronowski, David R.

    2004-11-01T23:59:59.000Z

    To establish strength criteria of Big Hill salt, a series of quasi-static triaxial compression tests have been completed. This report summarizes the test methods, set-up, relevant observations, and results. The triaxial compression tests established dilatant damage criteria for Big Hill salt in terms of stress invariants (I{sub 1} and J{sub 2}) and principal stresses ({sigma}{sub a,d} and {sigma}{sub 3}), respectively: {radical}J{sub 2}(psi) = 1746-1320.5 exp{sup -0.00034I{sub 1}(psi)}; {sigma}{sub a,d}(psi) = 2248 + 1.25 {sigma}{sub 3} (psi). For the confining pressure of 1,000 psi, the dilatant damage strength of Big Hill salt is identical to the typical salt strength ({radical}J{sub 2} = 0.27 I{sub 1}). However, for higher confining pressure, the typical strength criterion overestimates the damage strength of Big Hill salt.

  7. Damage detection in mechanical structures using extreme value statistic.

    SciTech Connect (OSTI)

    Worden, K.; Allen, D. W. (David W.); Sohn, H. (Hoon); Farrar, C. R. (Charles R.)

    2002-01-01T23:59:59.000Z

    The first and most important objective of any damage identification algorithms is to ascertain with confidence if damage is present or not. Many methods have been proposed for damage detection based on ideas of novelty detection founded in pattern recognition and multivariate statistics. The philosophy of novelty detection is simple. Features are first extracted from a baseline system to be monitored, and subsequent data are then compared to see if the new features are outliers, which significantly depart from the rest of population. In damage diagnosis problems, the assumption is that outliers are generated from a damaged condition of the monitored system. This damage classification necessitates the establishment of a decision boundary. Choosing this threshold value is often based on the assumption that the parent distribution of data is Gaussian in nature. While the problem of novelty detection focuses attention on the outlier or extreme values of the data i.e. those points in the tails of the distribution, the threshold selection using the normality assumption weighs the central population of data. Therefore, this normality assumption might impose potentially misleading behavior on damage classification, and is likely to lead the damage diagnosis astray. In this paper, extreme value statistics is integrated with the novelty detection to specifically model the tails of the distribution of interest. Finally, the proposed technique is demonstrated on simulated numerical data and time series data measured from an eight degree-of-freedom spring-mass system.

  8. Real Time Computational Algorithms for Eddy Current Based Damage Detection

    E-Print Network [OSTI]

    Real Time Computational Algorithms for Eddy Current Based Damage Detection H. T. Banks y, Michele L such damages by application of an eddy current based technique coupled with reduced order modeling. We begin by developing a model for a speci#12;c eddy current method in which we make some simplifying assumptions

  9. Ris-R-1334(EN) Identification of Damage to Wind

    E-Print Network [OSTI]

    Risø-R-1334(EN) Identification of Damage to Wind Turbine Blades by Modal Parameter Estimation April 2002 #12;Risø-R-1334(EN) Identification of Damage to Wind Turbine Blades by Modal Parameter condition monitoring of wind turbine blades (Phase I)". The goal of Phase I is to make a pre

  10. Permeability of WIPP Salt During Damage Evolution and Healing

    SciTech Connect (OSTI)

    BODNER,SOL R.; CHAN,KWAI S.; MUNSON,DARRELL E.

    1999-12-03T23:59:59.000Z

    The presence of damage in the form of microcracks can increase the permeability of salt. In this paper, an analytical formulation of the permeability of damaged rock salt is presented for both initially intact and porous conditions. The analysis shows that permeability is related to the connected (i.e., gas accessible) volumetric strain and porosity according to two different power-laws, which may be summed to give the overall behavior of a porous salt with damage. This relationship was incorporated into a constitutive model, known as the Multimechanism Deformation Coupled Fracture (MDCF) model, which has been formulated to describe the inelastic flow behavior of rock salt due to coupled creep, damage, and healing. The extended model was used to calculate the permeability of rock salt from the Waste Isolation Pilot Plant (WIPP) site under conditions where damage evolved with stress over a time period. Permeability changes resulting from both damage development under deviatoric stresses and damage healing under hydrostatic pressures were considered. The calculated results were compared against experimental data from the literature, which indicated that permeability in damaged intact WIPP salt depends on the magnitude of the gas accessible volumetric strain and not on the total volumetric strain. Consequently, the permeability of WIPP salt is significantly affected by the kinetics of crack closure, but shows little dependence on the kinetics of crack removal by sintering.

  11. Genetic Algorithm Based Damage Control For Shipboard Power Systems

    E-Print Network [OSTI]

    Amba, Tushar

    2010-07-14T23:59:59.000Z

    The work presented in this thesis was concerned with the implementation of a damage control method for U.S. Navy shipboard power systems (SPS). In recent years, the Navy has been seeking an automated damage control and power system management...

  12. Total dose radiation response of plasma-damaged NMOS devices

    SciTech Connect (OSTI)

    Yue, J.; Lo, E.; Flanery, M. [Honeywell Solid-State Electronic Center, Plymouth, MN (United States)] [Honeywell Solid-State Electronic Center, Plymouth, MN (United States)

    1997-11-01T23:59:59.000Z

    Plasma-damaged NMOS devices were subjected to the X-ray total dose irradiation. Unlike the traditional hot-carrier or Fowler-Nordheim (F-N) stress where the hole trap generation is less pronounced, this study shows enhanced hole trap and interface trap generation on plasma-damaged devices after total dose irradiation.

  13. AFM CHARACTERIZATION OF LASER INDUCED DAMAGE ON CDZNTE CRYSTAL SURFACES

    SciTech Connect (OSTI)

    Hawkins, S; Lucile Teague, L; Martine Duff, M; Eliel Villa-Aleman, E

    2008-06-10T23:59:59.000Z

    Semi-conducting CdZnTe (or CZT) crystals can be used in a variety of detector-type applications. CZT shows great promise for use as a gamma radiation spectrometer. However, its performance is adversely affected by point defects, structural and compositional heterogeneities within the crystals, such as twinning, pipes, grain boundaries (polycrystallinity), secondary phases and in some cases, damage caused by external forces. One example is damage that occurs during characterization of the surface by a laser during Raman spectroscopy. Even minimal laser power can cause Te enriched areas on the surface to appear. The Raman spectra resulting from measurements at moderate intensity laser power show large increases in peak intensity that is attributed to Te. Atomic Force Microscopy (AFM) was used to characterize the extent of damage to the CZT crystal surface following exposure to the Raman laser. AFM data reveal localized surface damage in the areas exposed to the Raman laser beam. The degree of surface damage to the crystal is dependent on the laser power, with the most observable damage occurring at high laser power. Moreover, intensity increases in the Te peaks of the Raman spectra are observed even at low laser power with little to no visible damage observed by AFM. AFM results also suggest that exposure to the same amount of laser power yields different amounts of surface damage depending on whether the exposed surface is the Te terminating face or the Cd terminating face of CZT.

  14. Mesoscale polycrystal calculations of damage in spallation in metals

    SciTech Connect (OSTI)

    Tonks, Davis L [Los Alamos National Laboratory; Bingert, John F [Los Alamos National Laboratory; Livescu, Veronica [Los Alamos National Laboratory; Luo, Shengnian [Los Alamos National Laboratory; Bronkhorst, C A [Los Alamos National Laboratory

    2010-01-01T23:59:59.000Z

    The goal of this project is to produce a damage model for spallation in metals informed by the polycrystalline grain structure at the mesoscale. Earlier damage models addressed the continuwn macroscale in which these effects were averaged out. In this work we focus on cross sections from recovered samples examined with EBSD (electron backscattered diffraction), which reveal crystal grain orientations and voids. We seek to understand the loading histories of specific sample regions by meshing up the crystal grain structure of these regions and simulating the stress, strain, and damage histories in our hydro code, FLAG. The stresses and strain histories are the fundamental drivers of damage and must be calculated. The calculated final damage structures are compared with those from the recovered samples to validate the simulations.

  15. How Damage Diversification Can Reduce Systemic Risk

    E-Print Network [OSTI]

    Burkholz, Rebekka; Schweitzer, Frank

    2015-01-01T23:59:59.000Z

    We consider the problem of risk diversification in complex networks. Nodes represent e.g. financial actors, whereas weighted links represent e.g. financial obligations (credits/debts). Each node has a risk to fail because of losses resulting from defaulting neighbors, which may lead to large failure cascades. Classical risk diversification strategies usually neglect network effects and therefore suggest that risk can be reduced if possible losses (i.e., exposures) are split among many neighbors (exposure diversification, ED). But from a complex networks perspective diversification implies higher connectivity of the system as a whole which can also lead to increasing failure risk of a node. To cope with this, we propose a different strategy (damage diversification, DD), i.e. the diversification of losses that are imposed on neighboring nodes as opposed to losses incurred by the node itself. Here, we quantify the potential of DD to reduce systemic risk in comparison to ED. For this, we develop a branching proce...

  16. Radiation Damage in Nuclear Fuel for Advanced Burner Reactors: Modeling and Experimental Validation

    SciTech Connect (OSTI)

    Jensen, Niels Gronbech; Asta, Mark; Ozolins, Nigel Browning'Vidvuds; de Walle, Axel van; Wolverton, Christopher

    2011-12-29T23:59:59.000Z

    The consortium has completed its existence and we are here highlighting work and accomplishments. As outlined in the proposal, the objective of the work was to advance the theoretical understanding of advanced nuclear fuel materials (oxides) toward a comprehensive modeling strategy that incorporates the different relevant scales involved in radiation damage in oxide fuels. Approaching this we set out to investigate and develop a set of directions: 1) Fission fragment and ion trajectory studies through advanced molecular dynamics methods that allow for statistical multi-scale simulations. This work also includes an investigation of appropriate interatomic force fields useful for the energetic multi-scale phenomena of high energy collisions; 2) Studies of defect and gas bubble formation through electronic structure and Monte Carlo simulations; and 3) an experimental component for the characterization of materials such that comparisons can be obtained between theory and experiment.

  17. Breakthrough: Record-Setting Cavity

    ScienceCinema (OSTI)

    Ciovati, Gianluigi

    2014-05-21T23:59:59.000Z

    Gianluigi "Gigi" Ciovati, a superconducting radiofrequency scientist, discusses how scientists at the U.S. Department of Energy's Jefferson Lab in Newport News, VA, used ARRA funds to fabricate a niobium cavity for superconducting radiofrequency accelerators that has set a world record for energy efficiency. Jefferson Lab's scientists developed a new, super-hot treatment process that could soon make it possible to produce cavities more quickly and at less cost, benefitting research and healthcare around the world. Accelerators are critical to our efforts to study the structure of matter that builds our visible universe. They also are used to produce medical isotopes and particle beams for diagnosing and eradicating disease. And they offer the potential to power future nuclear power plants that produce little or no radioactive waste.around the world. Accelerators are critical to our efforts to study the structure of matter that builds our visible universe. They also are used to produce medical isotopes and particle beams for diagnosing and eradicating disease. And they offer the potential to power future nuclear power plants that produce little or no radioactive waste.

  18. Real-Time damage localization by means of MEMS sensors and use of wireless data transmission

    E-Print Network [OSTI]

    Shinozuka, Masanobu

    Real-Time damage localization by means of MEMS sensors and use of wireless data transmission such as water delivery networks are damaged, it is critical to pinpoint the location of the damage, to assess the extent of the damage, and to mitigate the damage in real-time. We propose a wireless sensor network

  19. Calibration of damage parameters is an important issue for the use of damage laws, and particularly for industrial manufacturing processes. This paper deals with an

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Abstract Calibration of damage parameters is an important issue for the use of damage laws Lemaitre damage parameters using tensile tests. An adapted objective function is built, and Efficient, ductile damage, global measurement. 1 Introduction An actual industrial issue is the study of material

  20. Characterization of Damage in Sandstones along the Mojave Section of the San Andreas Fault: Implications for the Shallow Extent of Damage

    E-Print Network [OSTI]

    Ben-Zion, Yehuda

    Characterization of Damage in Sandstones along the Mojave Section of the San Andreas Fault: Implications for the Shallow Extent of Damage Generation ORY DOR,1,5 JUDITH S. CHESTER,2 YEHUDA BEN-ZION,1 shallow generation of rock damage during an earthquake rupture, we measure the degree of fracture damage

  1. Anna Rita Bizzarri Alessandro Paciaroni Caterina Arcangeli Salvatore Cannistraro

    E-Print Network [OSTI]

    Tuscia, Università Degli Studi Della

    -frequency vibrational modes in proteins: a neutron scattering investigation Received: 1 February 2001 / Revised version neutron scattering at dierent temperatures. The contribution to the dynamic structure factor arising from by inelastic neutron scattering and Raman spectroscopy, reveals the presence, in most of the protein systems in

  2. angu valodas rita: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    led to significant advances in under- standing the nonequilibrium transport in high and photovoltaic.40 In the quadrupole mechanism, the microwave radiation leads to excitation...

  3. Households’ Evacuation Decision in Response to Hurricanes Katrina and Rita

    E-Print Network [OSTI]

    Huang, Shih-Kai

    2014-08-07T23:59:59.000Z

    Education EM Expectation-Maximization Algorithm EnvCues Observed Environmental Cues EvacExp Expected Evacuation Expenses EvaDec Evacuation Decisions ExEvacImp Expected Evacuation Impediments ExHydroImp Expected Hydrological Impacts Exper...

  4. A Green Prison: The Santa Rita Jail Campus Microgrid

    E-Print Network [OSTI]

    Marnay, Chris

    2013-01-01T23:59:59.000Z

    and Energy Reliability, Distribution System Integrationand Energy Reliability, Distribution System Integration

  5. Federal Power Act section 202(c) - Hurricane Rita, September 2005 |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy Chinaof EnergyImpactOnSTATEMENT OF DAVIDThe data dashboardAof EnergyDepartment

  6. Celebrating Black History Month with DOE's Rita Franklin | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube platformBuilding RemovalCSS LetterStateDepartment of Energy CathyEnergy

  7. RITA-Bureau of Transportation Statistics | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with form History Facebook iconQuito,Jump to: navigation,REpower NorthRGE

  8. Microsoft Word - katrina and rita report.doc

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2:Introduction toManagement of the National 93-4 Acquisition RegulationMicrosoftThe

  9. Underground infrastructure damage for a Chicago scenario

    SciTech Connect (OSTI)

    Dey, Thomas N [Los Alamos National Laboratory; Bos, Rabdall J [Los Alamos National Laboratory

    2011-01-25T23:59:59.000Z

    Estimating effects due to an urban IND (improvised nuclear device) on underground structures and underground utilities is a challenging task. Nuclear effects tests performed at the Nevada Test Site (NTS) during the era of nuclear weapons testing provides much information on how underground military structures respond. Transferring this knowledge to answer questions about the urban civilian environment is needed to help plan responses to IND scenarios. Explosions just above the ground surface can only couple a small fraction of the blast energy into an underground shock. The various forms of nuclear radiation have limited penetration into the ground. While the shock transmitted into the ground carries only a small fraction of the blast energy, peak stresses are generally higher and peak ground displacement is lower than in the air blast. While underground military structures are often designed to resist stresses substantially higher than due to the overlying rocks and soils (overburden), civilian structures such as subways and tunnels would generally only need to resist overburden conditions with a suitable safety factor. Just as we expect the buildings themselves to channel and shield air blast above ground, basements and other underground openings as well as changes of geology will channel and shield the underground shock wave. While a weaker shock is expected in an urban environment, small displacements on very close-by faults, and more likely, soils being displaced past building foundations where utility lines enter could readily damaged or disable these services. Immediately near an explosion, the blast can 'liquefy' a saturated soil creating a quicksand-like condition for a period of time. We extrapolate the nuclear effects experience to a Chicago-based scenario. We consider the TARP (Tunnel and Reservoir Project) and subway system and the underground lifeline (electric, gas, water, etc) system and provide guidance for planning this scenario.

  10. Protection of Coastal Infrastructure under Rising Flood Risk

    E-Print Network [OSTI]

    Lickley, M.J.

    The 2005 hurricane season was particularly damaging to the United States, contributing to significant losses to energy infrastructure—much of it the result of flooding from storm surge during hurricanes Katrina and Rita. ...

  11. The vulnerability of U.S. coastal energy infrastructure under climate change

    E-Print Network [OSTI]

    Lickley, Megan Jeramaz

    2012-01-01T23:59:59.000Z

    The 2005 hurricane season was particularly damaging to the United States, contributing to significant losses to energy infrastructure -much of it a result of flooding from storm surges during hurricanes Katrina and Rita. ...

  12. DIVIDE AND CONQUER ROADMAP FOR ALGEBRAIC SETS ...

    E-Print Network [OSTI]

    2014-06-24T23:59:59.000Z

    Jun 18, 2014 ... SAUGATA BASU AND MARIE-FRANÇOISE ROY .... pk,. (2) a finite subset of points of N ? Rp. The set V 0 and the finite set N are not arbitrary ...

  13. JULIA SETS AND WILD CANTOR SETS ALASTAIR FLETCHER AND JANG-MEI WU

    E-Print Network [OSTI]

    Fletcher, Alastair

    JULIA SETS AND WILD CANTOR SETS ALASTAIR FLETCHER AND JANG-MEI WU Abstract. There exist uniformly quasiregular maps f : R3 R3 whose Julia sets are wild Cantor sets. 1. Introduction The most direct is not tame is called wild. The first example of a wild Cantor set was Antoine's necklace [1

  14. Logic and the set theory Lecture 20: The set theory (NS)

    E-Print Network [OSTI]

    Choi, Suhyoung

    Logic and the set theory Lecture 20: The set theory (NS) S. Choi Department of Mathematical Science KAIST, Daejeon, South Korea Fall semester, 2012 S. Choi (KAIST) Logic and set theory November 20, 2012 1 / 14 #12;Introduction About this lecture Further set theory S. Choi (KAIST) Logic and set theory

  15. Winter Energy Savings from Lower Thermostat Settings

    Reports and Publications (EIA)

    2000-01-01T23:59:59.000Z

    This discussion provides details on the effect of lowering thermostat settings during the winter heating months of 1997.

  16. Mathematical analysis of fully coupled approach to creep damage

    E-Print Network [OSTI]

    A. V. Shutov; A. -M. Saendig

    2006-01-25T23:59:59.000Z

    We prove the existence and uniqueness of solution to a classical creep damage problem. We formulate a sufficient condition for the problem to have a unique smooth solution, locally in time. This condition is stated in terms of smoothness of given data, such as solid geometry, boundary conditions, applied loads, and initial conditions. Counterexamples with an arbitrary small lifetime of a structure are also given, showing the mechanical interpretation of imposed smoothness conditions. The proposed theory gives a rigorous framework for a strain localization analysis. The influence of the damage gradient on the strain localization process is characterized within this framework and a measure of the damage localization is proposed.

  17. Repairs for damaged bolt holes in continuous fiber reinforced plastics 

    E-Print Network [OSTI]

    Copps, Kevin Daniel

    1992-01-01T23:59:59.000Z

    repair method for damaged bolt holes in such composites. Bolt holes in three types of graphite-epoxy were purposely damaged and then repaired. Each was tested to characterize its static and fatigue behavior. The tests used a special fixture to simulate... composite joints . Bearing-bypass ratio can change the failure mode of bolted composite joints 7 Drilling defects in graphite-epoxy coupons 12 26 The exit side of a IM7/8551-7A 18 ply tape coupon showing the damage due to drilling 27 9 Resin filled...

  18. October 2013 ENVIRONMENTAL SETTING, IMPACTS, AND MITIGATION

    E-Print Network [OSTI]

    Lee, Jason R.

    October 2013 4-1 CHAPTER 4 ENVIRONMENTAL SETTING, IMPACTS, AND MITIGATION MEASURES This chapter discusses the environmental setting, impacts, and mitigation measures for the 14 fully evaluated to measure changes that would result #12;Chapter 4 Environmental Setting, Impacts, and Mitigation Measures

  19. Screening and Evaluation Tool (SET) Users Guide

    SciTech Connect (OSTI)

    Layne Pincock

    2014-10-01T23:59:59.000Z

    This document is the users guide to using the Screening and Evaluation Tool (SET). SET is a tool for comparing multiple fuel cycle options against a common set of criteria and metrics. It does this using standard multi-attribute utility decision analysis methods.

  20. Level Set Implementations on Unstructured Point Cloud

    E-Print Network [OSTI]

    Duncan, James S.

    Level Set Implementations on Unstructured Point Cloud by HO, Hon Pong A Thesis Submitted;Level Set Implementations on Unstructured Point Cloud by HO, Hon Pong This is to certify that I have implementations on unstructured point cloud 15 3.1 Level set initialization

  1. Damage to HDPE geomembrane from interface shear over gravelly compacted clay liner

    E-Print Network [OSTI]

    Thielmann, Stuart

    2012-01-01T23:59:59.000Z

    R. S. (2011). “Geomembrane damage due to static and cyclic66 Figure 4.10. GM damage results after shearing for Testsshear displacement on shear strength and GM damage for test

  2. RhoJ Regulates Melanoma Chemoresistance by Suppressing Pathways that Sense DNA Damage

    E-Print Network [OSTI]

    Ho, Hsiang; Aruri, Jayavani; Kapadia, Rubina; Mehr, Hootan; White, Michael A.; Ganesan, Anand K.

    2012-01-01T23:59:59.000Z

    Pathways that Sense DNA Damage $watermark-text Hsiang Ho 1 ,16. Roos WP, Kaina B. DNA damage-induced apoptosis: FromDNA lesions to the DNA damage response and apoptosis. Cancer

  3. ENVIRONMENTAL DAMAGE AS NEGATIVE EXTERNALITY: UNCERTAINTY, MORAL COMPLEXITY AND THE LIMITS OF THE MARKET

    E-Print Network [OSTI]

    Boyer, Edmond

    21 ENVIRONMENTAL DAMAGE AS NEGATIVE EXTERNALITY: UNCERTAINTY, MORAL COMPLEXITY AND THE LIMITS environmental damage with a sociological approach, I show how the process of externalities definition inclusive and democratic public deliberation on environmental damage and its reparation. Key Words

  4. Modeling of Damage, Permeability Changes and Pressure Responses during Excavation of the TSX Tunnel in Granitic Rock at URL, Canada

    E-Print Network [OSTI]

    Rutqvist, Jonny

    2009-01-01T23:59:59.000Z

    Modeling of Damage, Permeability Changes and Pressureof excavation-induced damage, permeability changes, andrange of approaches to model damage and permeability changes

  5. Neutron and gamma irradiation damage to organic materials.

    SciTech Connect (OSTI)

    White, Gregory Von, II; Bernstein, Robert

    2012-04-01T23:59:59.000Z

    This document discusses open literature reports which investigate the damage effects of neutron and gamma irradiation on polymers and/or epoxies - damage refers to reduced physical chemical, and electrical properties. Based on the literature, correlations are made for an SNL developed epoxy (Epon 828-1031/DDS) with an expected total fast-neutron fluence of {approx}10{sup 12} n/cm{sup 2} and a {gamma} dosage of {approx}500 Gy received over {approx}30 years at < 200 C. In short, there are no gamma and neutron irradiation concerns for Epon 828-1031/DDS. To enhance the fidelity of our hypotheses, in regards to radiation damage, we propose future work consisting of simultaneous thermal/irradiation (neutron and gamma) experiments that will help elucidate any damage concerns at these specified environmental conditions.

  6. Salvaging Timber: What should I do with my damaged timber?

    E-Print Network [OSTI]

    Taylor, Eric; Foster, C. Darwin

    2005-10-31T23:59:59.000Z

    ER-041 5-06 Salvaging Timber: What should I do with my damaged timber? Eric L. Taylor, Assistant Professor and Extension Specialist?Forestry, and C. Darwin Foster, Associate Department Head and Extension Program Leader for Forestry, The Texas...

  7. Effects of ballistic damage on the dynamics of composite driveshafts

    E-Print Network [OSTI]

    Ayers, Thomas Ray

    1993-01-01T23:59:59.000Z

    The objective of this research program is to study the dynamics of a composite driveshaft before and after ballistic damage is incurred. Driveshafts are tested under static and dynamic loads to obtain material, mechanical, and vibrational...

  8. Hail Ice Damage of Stringer-Stiffened Curved Composite Panels /

    E-Print Network [OSTI]

    Le, Jacqueline Linh

    2013-01-01T23:59:59.000Z

    Damage. Composite Structures 2003;62:213–21. Ice Drop.How to make clear ice. 28 February 2011. Victoria, BC,2011/02/how-to- make-clear-ice-that-actually-works/ Graham,

  9. Atomistic simulations of radiation damage in amorphous metal alloys

    E-Print Network [OSTI]

    Baumer, Richard E. (Richard Edward)

    2013-01-01T23:59:59.000Z

    While numerous fundamental studies have characterized the atomic-level radiation response mechanisms in irradiated crystalline alloys, comparatively little is known regarding the mechanisms of radiation damage in amorphous ...

  10. Multiscale modeling of damage in multidirectional composite laminates

    E-Print Network [OSTI]

    Singh, Chandra Veer

    2009-05-15T23:59:59.000Z

    provides reasonable predictions for multidirectional laminatesin which intralaminar cracks may form in multiple orientations. Nevertheless, theprediction of damage accumulation and its effect on structural performance is a verydifficult problem due...

  11. Visual Indication of Mechanical Damage Using Core-Shell Microcapsules

    E-Print Network [OSTI]

    Sottos, Nancy R.

    -7 Changes in pH have been used to detect compression in polymer brushes,8 and microcapsules containing a p have been incorporated into filled hollow fibers to enhance damage visibility in the structure

  12. DAMAGE TOLERANCE ISSUES PECULIAR TO SUPERSONIC CIVIL TRANSPORT AIRCRAFT

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    investigations on creep, fatigue and creep-fatigue crack growth behaviour of the 2650-T6 aluminium alloy to investigate the damage tolerance of the new aluminium alloy succeeding as 2218A. LMPM has to examinate

  13. Spatially localized generation of nucleotide sequence-specific DNA damage

    E-Print Network [OSTI]

    Boxer, Steven G.

    Spatially localized generation of nucleotide sequence-specific DNA damage Dennis H. Oh* , Brett A- neously manipulated at the nucleotide level and in three dimen- sions. This approach for targeting

  14. Lengthscale effects in the damage and failure of composites

    E-Print Network [OSTI]

    Chambers, Jeffrey Thomas

    2014-01-01T23:59:59.000Z

    The primary objective of this work is to investigate and identify lengthscale effects associated with damage in composite materials and their structures, and to determine how these lengthscales vary across levels of ...

  15. Drag amplification and fatigue damage in vortex-induced vibrations

    E-Print Network [OSTI]

    Jhingran, Vikas Gopal

    2008-01-01T23:59:59.000Z

    Fatigue damage and drag force amplification due to Vortex-Induced-Vibrations (VIV) continue to cause significant problems in the design of structures which operate in ocean current environments. These problems are magnified ...

  16. air pollution damage: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Health Damages from Air Pollution in China MIT - DSpace Summary: In China, elevated levels of urban air...

  17. Multiscale modeling of damage in multidirectional composite laminates 

    E-Print Network [OSTI]

    Singh, Chandra Veer

    2009-05-15T23:59:59.000Z

    the strengths of micro-damage mechanics (MDM) and continuum damage mechanics (CDM) in predicting the sti - ness degradation due to these cracks. The micromechanics is performed on a repre- sentative unit cell using a three-dimensional nite element analysis.... Results and Discussion . . . . . . . . . . . . . . . . . . . . 83 1. Crack Surface Displacements . . . . . . . . . . . . . . 83 2. Prediction of Sti ness Degradation . . . . . . . . . . . 89 3. Parametric Study of Constraint E ects . . . . . . . . 91 4...

  18. A matrix damage accumulation model for laminated composites

    E-Print Network [OSTI]

    Lo, David Chi Shing

    1990-01-01T23:59:59.000Z

    . , Texas A8-M University Co-Chairs of Advisory Committee: Dr. D. H. Allen Dr. C. E. Harris A damage evolutionary relationship was developed to model the accuntulation of' intraply matrix cracks in laminated composites. This relationship was formulated... (Member) 'le=-~8 ~ W. E. Haisler (Head of Department) C. E. Harris & (Co-Clrair of Committee) / g. C. La, ' M. . Lu (Member) Itfay 1990 ABSTRACT A Matrix Damage Accumulation Model for Laminated Composites . (May 1990) David Chi Shing Lo, B, S...

  19. Quantitative studies of severe fuel damage using delayed neutron data

    SciTech Connect (OSTI)

    Bauer, T.H.; Braid, T.H. (Argonne National Lab., IL (USA)); Schleisiek, K. (Kernforschungszentrum Karlsruhe GmbH (Germany, F.R.))

    1990-01-01T23:59:59.000Z

    A technique to quantify fuel damage in an LMR through analysis of delayed neutron data is presented, which is suitable for analysis of both small-scale in-pile experiments and full-scale plants. Validating analyses are described for five in-pile severe accident simulations performed within the SLSF and Mol 7C test programs. Comparison is made of measured and calculated amounts of fuel damage. 8 refs., 5 figs., 2 tabs.

  20. Quantitative studies of severe fuel damage using delayed neutron data

    SciTech Connect (OSTI)

    Bauer, T.H.; Braiel, T.H. (Argonne National Lab., IL (United States)); Schleisiek, K. (Kernforschungszentrum Karlsruhe GmbH (Germany))

    1992-09-01T23:59:59.000Z

    In this paper, a technique is presented to quantify fuel damage in a liquid-metal reactor through fast-running computer analysis of delayed neutron data, suitable for analysis of both small-scale in-pile experiments and full-scale plants. Validating analyses are described for five in-pile severe accident simulations performed within the Sodium Loop Safety Facility and Mol-7C test programs. Comparison is made of measured and calculated amounts of fuel damage.

  1. An investigation of damage accumulation in graphite/epoxy laminates 

    E-Print Network [OSTI]

    Norvell, Robert Gerald

    1985-01-01T23:59:59.000Z

    AN INVESTIGATION OF DAMAGE ACCUMULATION IN GRAPHITE/EPOXY LAMINATES A Thesis by ROBERT GERALD NORVELL Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... August 1985 Major Subject: Aerospace Engineering AN INVESTIGATION OF DAMAGE ACCUMULATION IN GRAPHITE/EPOXY LAMINATES A Thesis by ROBERT GERALD NORVELL Approved as to style and content by: David H. Allen (Co-Chair of C mmitt. ) Richard A. Schap...

  2. Predicting threshold and location of laser damage on optical surfaces

    DOE Patents [OSTI]

    Siekhaus, Wigbert (Berkeley, CA)

    1987-01-01T23:59:59.000Z

    An apparatus useful in the prediction of the damage threshold of various optical devices, the location of weak spots on such devices and the location, identification, and elimination of optical surface impurities comprising, a focused and pulsed laser, an photo electric detector/imaging means, and a timer. The weak spots emit photoelectrons when subjected to laser intensities that are less than the intensity actually required to produce the damage. The weak spots may be eliminated by sustained exposure to the laser beam.

  3. Assessing blackbird damage to ripening rice in Matagorda County, Texas

    E-Print Network [OSTI]

    Wright, Robert Glen

    1987-01-01T23:59:59.000Z

    . At each sample point the rice was visually inspected for blackbird damage, using observations of birds feeding in the field and the presence of empty hulls (since blackbirds will "de-hull" dough stage rice) on the ground as supporting evidence...ASSESSING BLACKBIRD DAMAGE TO RIPENING RICE IN MATAGORDA COUNTY, TEXAS A Thesis by ROBERT GLEN WRIGHT Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE...

  4. Evaluation of moisture damage within asphalt concrete mixes

    E-Print Network [OSTI]

    Shah, Brij D.

    2004-09-30T23:59:59.000Z

    with load cycles. The analysis demonstrates the need to consider mixture compliance as well as bond energy in order to predict moisture damage. Mixtures with the two types of bitumen and each aggregate with and without hydrated lime were... evaluated. The hydrated lime substantially improved the resistance of the mixture to moisture damage. iv To my parents. v ACKNOWLEDGMENTS I would like to extend my sincere thanks to everyone who helped...

  5. The application of ultrasonics to assess damage in composite materials

    E-Print Network [OSTI]

    Eden, John Gregory

    1985-01-01T23:59:59.000Z

    THE APPLICATION OF ULTRASONICS TO ASSESS DAMAGE IN COMPOSITE MATERIALS A Thesis by JOHN GREGORY EDEN Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... December 1985 Major Subjectr Aerospace Engineering THE APPLICATION OF ULTRASONICS TO ASSESS DAMAGE IN COMPOSITE MATERIALS A Thesis by JOHN GREGORY EDEN Approved as to style and content by: (V. . Kinra, Chairman) (D. H. Allen, Member) (R. A...

  6. Damage in porous media due to salt crystallization

    E-Print Network [OSTI]

    Noushine Shahidzadeh-Bonn; Julie Desarnaud; François Bertrand; Xavier Chateau; Daniel Bonn

    2010-07-13T23:59:59.000Z

    We investigate the origins of salt damage in sandstones for the two most common salts: sodium chloride and sulfate. The results show that the observed difference in damage between the two salts is directly related to the kinetics of crystallization and the interfacial properties of the salt solutions and crystals with respect to the stone. We show that, for sodium sulfate, the existence of hydrated and anhydrous crystals and specifically their dissolution and crystallization kinetics are responsible for the damage. Using magnetic resonance imaging and optical microscopy we show that when water imbibes sodium sulfate contaminated sandstones, followed by drying at room temperature, large damage occurs in regions where pores are fully filled with salts. After partial dissolution, anhydrous sodium sulfate salt present in these regions gives rise to a very rapid growth of the hydrated phase of sulfate in the form of clusters that form on or close to the remaining anhydrous microcrystals. The rapid growth of these clusters generates stresses in excess of the tensile strength of the stone leading to the damage. Sodium chloride only forms anhydrous crystals that consequently do not cause damage in the experiments.

  7. Femtosecond pulse damage thresholds of dielectric coatings in vacuum

    SciTech Connect (OSTI)

    Michelle D. Shinn, Duy N. Nguyen, Luke A. Emmert ,Paul Schwoebel, Dinesh Patel, Carmen S. Menoni, Wolfgang Rudolph

    2011-03-01T23:59:59.000Z

    At 10-7 Torr, the multiple femtosecond pulse damage threshold, F(?), is about 10% of the single pulse damage fluence F(1) for hafnia and silica films compared to about 65% and 50%, respectively, at 630 Torr. In contrast, the single-pulse damage threshold is pressure independent. The decrease of F(?) with decreasing air pressure correlates with the water vapor and oxygen content of the ambient gas with the former having the greater effect. The decrease in F(?) is likely associated with an accumulation of defects derived from oxygen deficiency, for example vacancies. From atmospheric air pressure to pressures of {approx}3 x 10{sup -6} Torr, the damage 'crater' starts deterministically at the center of the beam and grows in diameter as the fluence increases. At pressure below 3x10-6 Torr, damage is initiated at random 'sites' within the exposed area in hafnia films, while the damage morphology remains deterministic in silica films. A possible explanation is that absorbing centers are created at predisposed sample sites in hafnia, for example at boundaries between crystallites, or crystalline and amorphous phases.

  8. A Study on Set-Graphs

    E-Print Network [OSTI]

    Johan Kok; K. P. Chithra; N. K. Sudev; C. Susanth

    2015-04-09T23:59:59.000Z

    A \\textit{primitive hole} of a graph $G$ is a cycle of length $3$ in $G$. The number of primitive holes in a given graph $G$ is called the primitive hole number of that graph $G$. The primitive degree of a vertex $v$ of a given graph $G$ is the number of primitive holes incident on the vertex $v$. In this paper, we introduce the notion of set-graphs and study the properties and characteristics of set-graphs. We also check the primitive hole number and primitive degree of set-graphs. Interesting introductory results on the nature of order of set-graphs, degree of the vertices corresponding to subsets of equal cardinality, the number of largest complete subgraphs in a set-graph etc. are discussed in this study. A recursive formula to determine the primitive hole number of a set-graph is also derived in this paper.

  9. Structural Health Monitoring for Impact Damage in Composite Structures.

    SciTech Connect (OSTI)

    Roach, Dennis P.; Raymond Bond (Purdue); Doug Adams (Purdue)

    2014-08-01T23:59:59.000Z

    Composite structures are increasing in prevalence throughout the aerospace, wind, defense, and transportation industries, but the many advantages of these materials come with unique challenges, particularly in inspecting and repairing these structures. Because composites of- ten undergo sub-surface damage mechanisms which compromise the structure without a clear visual indication, inspection of these components is critical to safely deploying composite re- placements to traditionally metallic structures. Impact damage to composites presents one of the most signi fi cant challenges because the area which is vulnerable to impact damage is generally large and sometimes very dif fi cult to access. This work seeks to further evolve iden- ti fi cation technology by developing a system which can detect the impact load location and magnitude in real time, while giving an assessment of the con fi dence in that estimate. Fur- thermore, we identify ways by which impact damage could be more effectively identi fi ed by leveraging impact load identi fi cation information to better characterize damage. The impact load identi fi cation algorithm was applied to a commercial scale wind turbine blade, and results show the capability to detect impact magnitude and location using a single accelerometer, re- gardless of sensor location. A technique for better evaluating the uncertainty of the impact estimates was developed by quantifying how well the impact force estimate meets the assump- tions underlying the force estimation technique. This uncertainty quanti fi cation technique was found to reduce the 95% con fi dence interval by more than a factor of two for impact force estimates showing the least uncertainty, and widening the 95% con fi dence interval by a fac- tor of two for the most uncertain force estimates, avoiding the possibility of understating the uncertainty associated with these estimates. Linear vibration based damage detection tech- niques were investigated in the context of structural stiffness reductions and impact damage. A method by which the sensitivity to damage could be increased for simple structures was presented, and the challenges of applying that technique to a more complex structure were identi fi ed. The structural dynamic changes in a weak adhesive bond were investigated, and the results showed promise for identifying weak bonds that show little or no static reduction in stiffness. To address these challenges in identifying highly localized impact damage, the possi- bility of detecting damage through nonlinear dynamic characteristics was also identi fi ed, with a proposed technique which would leverage impact location estimates to enable the detection of impact damage. This nonlinear damage identi fi cation concept was evaluated on a composite panel with a substructure disbond, and the results showed that the nonlinear dynamics at the damage site could be observed without a baseline healthy reference. By further developing impact load identi fi cation technology and combining load and damage estimation techniques into an integrated solution, the challenges associated with impact detection in composite struc- tures can be effectively solved, thereby reducing costs, improving safety, and enhancing the operational readiness and availability of high value assets.

  10. About uniform regularity of collections of sets

    E-Print Network [OSTI]

    2013-10-15T23:59:59.000Z

    About uniform regularity of collections of sets. Alexander Y. Kruger · Nguyen H. Thao. Dedicated to Asen Dontchev on the occasion of his 65th birthday and.

  11. Energy Department, Northwest Food Processors Association Set...

    Office of Environmental Management (EM)

    Food Processors Association today set ambitious goals to reduce energy use and carbon emissions in the industrial sector. DOE Industrial Technologies Program Manager Douglas Kaempf...

  12. Economic Development Set-Aside (EDSA) (Iowa)

    Broader source: Energy.gov [DOE]

    The Economic Development Set-Aside (EDSA) program provides financial assistance to those businesses and industries requiring such assistance in order to create new job opportunities. Assistance is...

  13. On Test Sets for Nonlinear Integer Maximization

    E-Print Network [OSTI]

    2008-02-05T23:59:59.000Z

    On Test Sets for Nonlinear. Integer Maximization. July 2007; revised February 2008. Jon Leea, Shmuel Onnb, Robert Weismantelc a IBM T.J. Watson Research

  14. Damage and Mortality Assessment of Redwood and Mixed Conifer Forest Types

    E-Print Network [OSTI]

    Standiford, Richard B.

    347 Damage and Mortality Assessment of Redwood and Mixed Conifer Forest Types in Santa Cruz County left with tough decisions on how to treat tree damage and mortality compounded by the Pine Mountain a method for evaluating damage and mortality. Qualitative criteria for evaluating stand damage focused

  15. Damage In a Random Mlerstructure: Size Effects, Fractals, and Entropy Maximization

    E-Print Network [OSTI]

    Ostoja-Starzewski, Martin

    Damage In a Random Mler©structure: Size Effects, Fractals, and Entropy Maximization Martin Ostoja a micromechanical approach to damage growth in graph- representable microstructures is presented. Damage is denned in scatter of strength, and the fractal character of damage geometry, and thus provides a basis

  16. Radiation damage calculation in PHITS Y. Iwamoto1, K. Niita2, T. Sawai1,

    E-Print Network [OSTI]

    McDonald, Kirk

    Radiation damage calculation in PHITS 1 Y. Iwamoto1, K. Niita2, T. Sawai1, R.M. Ronningen3, T Feb. ­ 15 Feb. 2012 #12;2 Introduction Radiation damage model in PHITS Radiation damage calculation As the power of proton and heavy-ion accelerators is increasing, the prediction of the structural damage

  17. Nonlinear damage rheology and wave resonance in rocks V. Lyakhovsky1

    E-Print Network [OSTI]

    Ampuero, Jean Paul

    1 Nonlinear damage rheology and wave resonance in rocks V. Lyakhovsky1 , Y. Hamiel1 , P. Ampuero2 of damaged materials with theoretical analyses and numerical simulations based on a nonlinear continuum damage model. Quasi-static simulations of damage accumulation under cyclic load reproduce the laboratory

  18. HumanWildlife Conflicts 1(2):205213, Fall 2007 Intrafield patterns of wildlife damage to

    E-Print Network [OSTI]

    Human­Wildlife Conflicts 1(2):205­213, Fall 2007 Intrafield patterns of wildlife damage to corn at reducing wildlife damage to row crops rely on information concerning the spatial nature of wildlife damage at local and landscape scales. In this study we explored spatial patterns of wildlife damage within

  19. The waves of damage in elastic-plastic lattices with waiting links: design and simulation

    E-Print Network [OSTI]

    Cherkaev, Andrej

    The waves of damage in elastic-plastic lattices with waiting links: design and simulation A damage (a neck) in an element, initiating the damage instead in another sequen- tial element. A wave of "partial damage" propagates through the chain, as all the links develop necks but do not fail. When

  20. DAMAGE IDENTIFICATION IN A STEEL FRAME USING HIGH-FREQUENCY ELECTRO-MECHANICAL IMPEDANCE

    E-Print Network [OSTI]

    Wang, Ji

    411 DAMAGE IDENTIFICATION IN A STEEL FRAME USING HIGH-FREQUENCY ELECTRO-MECHANICAL IMPEDANCE presents an experimental investigation of damage detection of a steel frame using electro damage in structures. Damages are introduced by completely loosening bolts over several locations

  1. Impurity Radiation from the LHCD Launcher During Operation in JET and Investigation of Launcher Damage

    E-Print Network [OSTI]

    Impurity Radiation from the LHCD Launcher During Operation in JET and Investigation of Launcher Damage

  2. A Review of Damage Detection and Health Monitoring of Mechanical Systems from Changes in

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    A Review of Damage Detection and Health Monitoring of Mechanical Systems from Changes of Damage Detection and Health Monitoring... 1 1. Introduction Damage are a main cause of structural failure of structural components by detection damage in structures in the early state. More specifically, structural

  3. A Novel Damage Sensitive Feature Based on State-Space Representation1

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    A Novel Damage Sensitive Feature Based on State-Space Representation1 ABSTRACT Damage detection and the variable and unknown excitation. There is still a lack of a robust damage detection process. Taking in a reconstructed state-space, a novel damage sensitive feature vector is proposed. Statistical modelling using

  4. SUBSPACE-BASED DETECTION OF FATIGUE DAMAGE ON JACKET SUPPORT STRUCTURES OF OFFSHORE WIND TURBINES

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    SUBSPACE-BASED DETECTION OF FATIGUE DAMAGE ON JACKET SUPPORT STRUCTURES OF OFFSHORE WIND TURBINES-based Damage Detec- tion (SSDD) method on model structures for an utilization of this approach on offshore wind damage in real size structural components of offshore wind turbines. KEYWORDS : Damage detection

  5. Potential radiation damage: Storage tanks for liquid radioactive waste

    SciTech Connect (OSTI)

    Caskey, G.R. Jr.

    1992-08-21T23:59:59.000Z

    High level waste at SRS is stored in carbon steel tanks constructed during the period 1951 to 1981. This waste contains radionuclides that decay by alpha, beta, or gamma emission or are spontaneous neutronsources. Thus, a low intensity radiation field is generated that is capable of causing displacement damage to the carbon steel. The potential for degradation of mechanical properties was evaluated by comparing the estimated displacement damage with published data relating changes in Charpy V-notch (CVN) impact energy to neutron exposure. Experimental radiation data was available for three of the four grades of carbonsteel from which the tanks were constructed and is applicable to all four steels. Estimates of displacement damage arising from gamma and neutron radiation have been made based on the radionuclide contents for high level waste that are cited in the Safety Analysis Report (SAR) for the Liquid Waste Handling Facilities in the 200-Area. Alpha and beta emissions do not penetrate carbon steel to a sufficient depth to affect the bulk properties of the tank walls but may aggravate corrosion processes. The damage estimates take into account the source of the waste (F- or H-Area), the several types of tank service, and assume wateras an attenuating medium. Estimates of displacement damage are conservative because they are based on the highest levels of radionuclide contents reported in the SAR and continuous replenishment of the radionuclides.

  6. Organizational Setting II.A External

    E-Print Network [OSTI]

    Scharfstein, Daniel

    Chapter II Organizational Setting II.A External CEPH Criterion The School shall be an integral part to professional schools in that institution #12;External Organizational Setting CEPH Expected Documentation 1 bodies (other than CEPH) to which the institution responds 2 An organizational chart of the University

  7. Multiverse Set Theory and Absolutely Undecidable Propositions

    E-Print Network [OSTI]

    Väänänen, Jouko

    Multiverse Set Theory and Absolutely Undecidable Propositions Jouko V¨a¨an¨anen University of Helsinki and University of Amsterdam Contents 1 Introduction 2 2 Background 4 3 The multiverse of sets 6 3.1 The one universe case . . . . . . . . . . . . . . . . . . . . . . . . 6 3.2 The multiverse

  8. Observation-based test set generation

    E-Print Network [OSTI]

    Cobb, Jeffrey Lee

    2013-02-22T23:59:59.000Z

    . Current test set generation relies primarily on the "stuck-at" model, which both excites and observes every site of the circuit. However, a test set with good stuck-at fault coverage will not necessarily find all the defects in a circuit. Other models...

  9. Index Sets of Computable Structures Wesley Calvert #

    E-Print Network [OSTI]

    Calvert, Wesley

    the isomorphic copies of A (see [11]). Such a sentence is called a Scott sentence for A. A Scott sentence The index set of a computable structure A is the set of all indices for computable isomorphic copies of A, Archimedean ordered fields, Abelian p­groups, and the models of the original Ehrenfeucht theory. 1

  10. Index Sets of Computable Structures Wesley Calvert

    E-Print Network [OSTI]

    Calvert, Wesley

    copies of A (see [11]). Such a sentence is called a Scott sentence for A. A Scott sentence set of a computable structure A is the set of all indices for computable isomorphic copies of A. We, Archimedean ordered fields, Abelian p-groups, and the models of the original Ehrenfeucht theory. 1

  11. The dynamic interplay between DNA damage and metabolism : the metabolic fate and transport of DNA lesions and novel DNA damage derived from intermediary metabolism

    E-Print Network [OSTI]

    Jumpathong, Watthanachai

    2014-01-01T23:59:59.000Z

    The work presented in this thesis explores two novel and complementary facets of endogenous DNA damage: the development of biomarkers of inflammation based on metabolites of DNA damage products and the formation of DNA ...

  12. Published in Materials and Manufacturing Processes, Vol. 15, No. 1, 2000, pp. 97-Effects of process settings on the porosity levels of AM60B

    E-Print Network [OSTI]

    Zhou, Wei

    -heated to a temperature of 160 ± 10°C. The protective gas used was a mixture of SF6 and dry air. The volume ratio of SF6 to dry air was in the range 0.3-0.5 and SF6 flow rate was set at 7.03 l/min. As SF6 is a damaging

  13. Oxidative stress and oxidative damage in chemical carcinogenesis

    SciTech Connect (OSTI)

    Klaunig, James E., E-mail: jklauni@indiana.edu; Wang Zemin; Pu Xinzhu; Zhou Shaoyu

    2011-07-15T23:59:59.000Z

    Reactive oxygen species (ROS) are induced through a variety of endogenous and exogenous sources. Overwhelming of antioxidant and DNA repair mechanisms in the cell by ROS may result in oxidative stress and oxidative damage to the cell. This resulting oxidative stress can damage critical cellular macromolecules and/or modulate gene expression pathways. Cancer induction by chemical and physical agents involves a multi-step process. This process includes multiple molecular and cellular events to transform a normal cell to a malignant neoplastic cell. Oxidative damage resulting from ROS generation can participate in all stages of the cancer process. An association of ROS generation and human cancer induction has been shown. It appears that oxidative stress may both cause as well as modify the cancer process. Recently association between polymorphisms in oxidative DNA repair genes and antioxidant genes (single nucleotide polymorphisms) and human cancer susceptibility has been shown.

  14. Micro-CT for the quantification of 3D voids within damaged structures

    SciTech Connect (OSTI)

    Patterson, Brian M [Los Alamos National Laboratory; Hamilton, Christopher E [Los Alamos National Laboratory; Cerreta, Ellen K [Los Alamos National Laboratory; Dennis - Koller, Darcie [Los Alamos National Laboratory; Bronkhorst, C. A. [Los Alamos National Laboratory; Hansen, B. L. [Los Alamos National Laboratory

    2011-01-26T23:59:59.000Z

    Micro X-ray Computed Tomography (MXCT) is widely used in the materials community to examine the internal structure of materials for voids and cracks due to damage or casting, or other defects. Most research in this area focuses on the qualitative aspect of the image, simply answering; Are there voids present? Here we present an ongoing study of the quantified incipient spall voids in Cu with different grain sizes, using a gas gun with various velocities. Data analysis packages for MXCT are just now becoming able to dimensionally measure and produce statistics on the voids-present. In order to make the size of the features in the 3D image quantifiable, the question, how many radiographs are required to render the object dimensionally accurate in 3D, must be answered. A series of data sets has been coUected, varying the number of radiographs collected in order to determine the appropriate number required.

  15. 1 | De-icing salt damage to trees | November 2011 Pathology Advisory Note

    E-Print Network [OSTI]

    1 | De-icing salt damage to trees | November 2011 Pathology Advisory Note (No. 11) De-icing salt damage to trees De-icing Salt Damage to Trees Joan F Webber, David R Rose, Martin C Dobson #12;2 | De-icing salt damage to trees | November 2011 S a l t D a m a g e De-icing Salt Damage Introduction Rock salt

  16. Thermal annealing of laser damage precursors on fused silica surfaces

    SciTech Connect (OSTI)

    Shen, N; Miller, P E; Bude, J D; Laurence, T A; Suratwala, T I; Steele, W A; Feit, M D; Wang, L L

    2012-03-19T23:59:59.000Z

    Previous studies have identified two significant precursors of laser damage on fused silica surfaces at fluenes below {approx} 35 J/cm{sup 2}, photoactive impurities in the polishing layer and surface fractures. In the present work, isothermal heating is studied as a means of remediating the highly absorptive, defect structure associated with surface fractures. A series of Vickers indentations were applied to silica surfaces at loads between 0.5N and 10N creating fracture networks between {approx} 10{micro}m and {approx} 50{micro}m in diameter. The indentations were characterized prior to and following thermal annealing under various times and temperature conditions using confocal time-resolved photo-luminescence (CTP) imaging, and R/1 optical damage testing with 3ns, 355nm laser pulses. Significant improvements in the damage thresholds, together with corresponding reductions in CTP intensity, were observed at temperatures well below the glass transition temperature (T{sub g}). For example, the damage threshold on 05.N indentations which typically initiates at fluences <8 J/cm{sup 2} could be improved >35 J/cm{sup 2} through the use of a {approx} 750 C thermal treatment. Larger fracture networks required longer or higher temperature treatment to achieve similar results. At an annealing temperature > 1100 C, optical microscopy indicates morphological changes in some of the fracture structure of indentations, although remnants of the original fracture and significant deformation was still observed after thermal annealing. This study demonstrates the potential of using isothermal annealing as a means of improving the laser damage resistance of fused silica optical components. Similarly, it provides a means of further understanding the physics associated with optical damage and related mitigation processes.

  17. Predicting threshold and location of laser damage on optical surfaces

    DOE Patents [OSTI]

    Siekhaus, W.

    1985-02-04T23:59:59.000Z

    Disclosed is an apparatus useful in the prediction of the damage threshold of various optical devices, the location of weak spots on such devices and the location, identification, and elimination of optical surface impurities. The apparatus comprises a focused and pulsed laser, a photo electric detector/imaging means, and a timer. The weak spots emit photoelectrons when subjected to laser intensities that are less than the intensity actually required to produce the damage. The weak spots may be eliminated by sustained exposure to the laser beam.

  18. Measuring Radiation Damage from Heavy Energetic Ions in Aluminum

    SciTech Connect (OSTI)

    Kostin, M., PI-MSU; Ronningen, R., PI-MSU; Ahle, L., PI-LLNL; Gabriel, T., Scientific Investigation and Development; Mansur, L., PI-ORNL; Leonard, K., ORNL; Mokhov, N., FNAL; Niita, K., RIST, Japan

    2009-02-21T23:59:59.000Z

    An intense beam of 122 MeV/u (9.3 GeV) 76Ge ions was stopped in aluminum samples at the Coupled Cyclotron Facility at NSCL, MSU. Attempts were made at ORNL to measure changes in material properties by measuring changes in electrical resistivity and microhardness, and by transmission electron microscopy characterization, for defect density caused by radiation damage, as a function of depth and integrated ion flux. These measurements are relevant for estimating damage to components at a rare isotope beam facility.

  19. Bin Set 1 Calcine Retrieval Feasibility Study

    SciTech Connect (OSTI)

    R. D. Adams; S. M. Berry; K. J. Galloway; T. A. Langenwalter; D. A. Lopez; C. M. Noakes; H. K. Peterson; M. I. Pope; R. J. Turk

    1999-10-01T23:59:59.000Z

    At the Department of Energy's Idaho Nuclear Technology and Engineering Center, as an interim waste management measure, both mixed high-level liquid waste and sodium bearing waste have been solidified by a calculation process and are stored in the Calcine Solids Storage Facilities. This calcined product will eventually be treated to allow final disposal in a national geologic repository. The Calcine Solids Storage Facilities comprise seven ''bit sets.'' Bin Set 1, the first to be constructed, was completed in 1959, and has been in service since 1963. It is the only bin set that does not meet current safe-shutdown earthquake seismic criteria. In addition, it is the only bin set that lacks built-in features to aid in calcine retrieval. One option to alleviate the seismic compliance issue is to transport the calcine from Bin Set 1 to another bin set which has the required capacity and which is seismically qualified. This report studies the feasibility of retrieving the calcine from Bi n Set 1 and transporting it into Bin Set 6 which is located approximately 650 feet away. Because Bin Set 1 was not designed for calcine retrieval, and because of the high radiation levels and potential contamination spread from the calcined material, this is a challenging engineering task. This report presents preconceptual design studies for remotely-operated, low-density, pneumatic vacuum retrieval and transport systems and equipment that are based on past work performed by the Raytheon Engineers and Constructors architectural engineering firm. The designs presented are considered feasible; however, future development work will be needed in several areas during the subsequent conceptual design phase.

  20. Almost Periodic Measures and Meyer Sets

    E-Print Network [OSTI]

    Nicolae Strungaru

    2015-01-05T23:59:59.000Z

    In the first part, we construct a cut and project scheme from a family $\\{P_\\varepsilon\\}$ of sets verifying four conditions. We use this construction to characterize weighted Dirac combs defined by cut and project schemes and by continuous functions on the internal groups in terms of almost periodicity. We are also able to characterise those weighted Dirac combs for which the internal function is compactly supported. Lastly, using the same cut and project construction for $\\varepsilon$-dual sets, we are able to characterise Meyer sets in $\\sigma$-compact locally compact Abelian groups.

  1. Tight extended formulations for independent set

    E-Print Network [OSTI]

    2014-09-15T23:59:59.000Z

    3. there is finite set Q and a mapping f : V ? 2Q such that. (a) f is “consistent” with the acyclicity, namely, for every hyperarc (J, i) ?. A and for every j ? J, we ...

  2. Constructing Roadmaps of Semi-algebraic Sets

    E-Print Network [OSTI]

    4 A Uniform Algorithm. 4.1 Combinatorial Level. Given a polynomial Q and a set of polynomials P = fP1;:::;Psg we de ne the combinatorial level. of the system (Q;

  3. A note on three dimensional good sets

    E-Print Network [OSTI]

    K. Gowri Navada

    2008-02-26T23:59:59.000Z

    We show that as in the case of n- fold Cartesian product for n greater than or equal to 4, even in 3-fold Cartesian product, a related component of a good set need not be a full component.

  4. Fourier restriction phenomenon in thin sets 

    E-Print Network [OSTI]

    Papadimitropoulos, Christos

    2010-01-01T23:59:59.000Z

    We study the Fourier restriction phenomenon in settings where there is no underlying proper smooth subvariety. We prove an (Lp, L2) restriction theorem in general locally compact abelian groups and apply it in groups ...

  5. Rate Setting for Small Water Systems

    E-Print Network [OSTI]

    Dozier, Monty; Theodori, Gene L.; Jensen, Ricard

    2007-03-28T23:59:59.000Z

    Knowing how to set the proper rate for water service is a challenge for small water systems. They must generate enough revenue to remain solvent, but offer affordable service. This publication describes the various types of rates and explains...

  6. Generalized measurement on size of set

    E-Print Network [OSTI]

    Hua-Rong Peng; Da-Hai Li; Qiong-Hua Wang

    2012-11-09T23:59:59.000Z

    We generalize the measurement using an expanded concept of cover, in order to provide a new approach to size of set other than cardinality. The generalized measurement has application backgrounds such as a generalized problem in dimension reduction, and has reasons from the existence of the minimum of both the positive size and the positive graduation, i.e., both the minimum is the size of the set ${0}$. The minimum of positive graduation in actual measurement provides the possibility that an object cannot be partitioned arbitrarily, e.g., an interval $[0, 1]$ cannot be partitioned by arbitrarily infinite times to keep compatible with the minimum of positive size. For the measurement on size of set, it can be assumed that this minimum is the size of ${0}$, in symbols $|{0}|$ or graduation 1. For a set $S$, we generalize any graduation as the size of a set $C_i$ where $\\exists x \\in S (x \\in C_i)$, and $|S|$ is represented by a pair, in symbols $(C, N(C))$, where ${C} = \\cup {C_i}$ and $N(C)$ is a set function on $C_i$, with $C_i$ independent of the order $i$ and $N(C)$ reflecting the quantity of $C_i$. This pair is a generalized form of box-counting dimension. The yielded size satisfies the properties of outer measure in general cases, and satisfies the properties of measure in the case of graduation 1; while in the reverse view, measure is a size using the graduation of size of an interval. As for cardinality, the yielded size is a one-to-one correspondence where only addition is allowable, a weak form of cardinality, and rewrites Continuum Hypothesis using dimension as $\\omega \\dot |{0,1}| = 1$. In the reverse view, cardinality of a set is a size in the graduation of the set. The generalized measurement provides a unified approach to dimension, measure, cardinality and hence infinity.

  7. Proton Irradiation Damage Assessment of Carbon Reinforced Composites

    E-Print Network [OSTI]

    McDonald, Kirk

    Proton Irradiation Damage Assessment of Carbon Reinforced Composites: 2-D & 3-D Weaved Structures carbon-carbon composite ATJ Graphite 3D CC composite AGS Beam-on-Target tests show clearly that carbon composites are better absorbers of thermo- mechanical shock. This is attributed to the very low coeff

  8. Methods for globally treating silica optics to reduce optical damage

    DOE Patents [OSTI]

    Miller, Philip Edward; Suratwala, Tayyab Ishaq; Bude, Jeffrey Devin; Shen, Nan; Steele, William Augustus; Laurence, Ted Alfred; Feit, Michael Dennis; Wong, Lana Louie

    2012-11-20T23:59:59.000Z

    A method for preventing damage caused by high intensity light sources to optical components includes annealing the optical component for a predetermined period. Another method includes etching the optical component in an etchant including fluoride and bi-fluoride ions. The method also includes ultrasonically agitating the etching solution during the process followed by rinsing of the optical component in a rinse bath.

  9. Monitoring Forest Damage Methods and Development in Sweden

    E-Print Network [OSTI]

    , fieldwork in the target-tailored inventory of resin top disease, damage by Spruce bark beetle. (photo: S is the most important information that can be obtained from these kinds of inventories. Short variability. Large-scale monitoring, such as that performed in national forest inventories, has good potential

  10. Conserved and Unconventional Responses to DNA Damage in Tetrahymena 

    E-Print Network [OSTI]

    Sandoval Oporto, Pamela

    2012-07-16T23:59:59.000Z

    characterization of the response to genotoxic agents showed that Tetrahymena is able to activate a G1/S and intra-S phase DNA damage response. The results presented here suggest that a caffeine-dependent checkpoint activator protein modulates the response to DNA...

  11. "Exploring damage management of high performance metallic alloys in critical

    E-Print Network [OSTI]

    Acton, Scott

    Fatigue Localized corrosion degrades fatigue performance of high strength aluminum alloys. The expense and Aluminum Alloys Exposure to a moist environment degrades the fatigue resistance of all aluminum alloys"Exploring damage management of high performance metallic alloys in critical systems to develop new

  12. DAMAGE DETECTION IN COMPOSITES BY NONCONTACT LASER Byeongjin Park

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    , Composite structures, Wind blade. INTRODUCTION Composite materials are widely used for various industries. The feasibility of the proposed technique is examined by localizing a delamination in a real 10 kW wind turbine blade. KEYWORDS : Laser ultrasonics, Damage detection and localization, Time-of-flight triangulation

  13. THE INTERACTIONS OF SURFACE DAMAGE AND RF CAVITY OPERATION

    E-Print Network [OSTI]

    Harilal, S. S.

    with short pulses. We work with a breakdown model where the breakdown trigger is caused by tensile stress due asperities that Work supported by USDoE, Office of High Energy Physics norem@anl.gov exist on the surface of damage produced in a breakdown event is , s2() = Ue-a , where we assume a proportionality to the energy

  14. Automated Damage Diagnosis and Recovery for Remote Robotics

    E-Print Network [OSTI]

    Bongard, Josh

    ; damage may require rapid compensation (eg., power drain due to coverage of solar panels); and repeated that are qualitatively different from the original controller. A number of algorithms based on repeated testing have been only handles pre­ specified error types. The algorithm proposed here is demon­ strated to automatically

  15. Automated Damage Diagnosis and Recovery for Remote Robotics

    E-Print Network [OSTI]

    Bongard, Josh

    ; damage may require rapid compensation (eg., power drain due to coverage of solar panels); and repeated that are qualitatively different from the original controller. A number of algorithms based on repeated testing have been only handles pre- specified error types. The algorithm proposed here is demon- strated to automatically

  16. Temporary patching of damaged UF{sub 6} cylinders

    SciTech Connect (OSTI)

    Cardenas, A.L. [Martin Marietta Energy Systems, Inc., OH (United States)

    1991-12-31T23:59:59.000Z

    Patching techniques based on application of epoxy resins have been developed for temporarily repairing UF{sub 6} cylinders which have sustained relatively minor damage and must be safely emptied. The method is considerably faster and simpler than metallurgical weld repairs. Laboratory tests, detailed operational procedures, and case histories of experience at the Portsmouth Gaseous Diffusion Plant are described.

  17. Specific grinding energy causing thermal damage in precision gear steels

    E-Print Network [OSTI]

    Hatathodi, Srinivas

    2002-01-01T23:59:59.000Z

    of thermal damage for surface grinding of AISI 9310 gear steel using two different grinding wheels and two different coolants. The grinding wheels used for this research are plain alumina wheel-32A80-JVBE and Seeded Gel alumina abrasive-5SG80-JVS...

  18. Electric heating units in pollination bags avoid damage

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Electric heating units in pollination bags avoid damage to flowers by spring frost J. CH. FERRAND n'Orlgans Ardon, F 45160 Olivet Summary An effective, cheap and simple heating device was designed by INRA heating, Larix. Controlled crosses are essential for forest tree breeding, but spring frost can destroy

  19. When word recognition goes wrong: Acquired dyslexia: brain damage (strokes).

    E-Print Network [OSTI]

    O'Reilly, Randall C.

    1 Dyslexia When word recognition goes wrong: Acquired dyslexia: brain damage (strokes). ­ Surface dyslexia: can't read irregular words (yacht). ­ Phonological dyslexia: can't read nonwords (nust). ­ Deep dyslexia: semantic errors (orchestra = symphony) Developmental dyslexia: this is most common and poorly

  20. Impurity-doped optical shock, detonation and damage location sensor

    DOE Patents [OSTI]

    Weiss, J.D.

    1995-02-07T23:59:59.000Z

    A shock, detonation, and damage location sensor providing continuous fiber-optic means of measuring shock speed and damage location, and could be designed through proper cabling to have virtually any desired crush pressure. The sensor has one or a plurality of parallel multimode optical fibers, or a singlemode fiber core, surrounded by an elongated cladding, doped along their entire length with impurities to fluoresce in response to light at a different wavelength entering one end of the fiber(s). The length of a fiber would be continuously shorted as it is progressively destroyed by a shock wave traveling parallel to its axis. The resulting backscattered and shifted light would eventually enter a detector and be converted into a proportional electrical signals which would be evaluated to determine shock velocity and damage location. The corresponding reduction in output, because of the shortening of the optical fibers, is used as it is received to determine the velocity and position of the shock front as a function of time. As a damage location sensor the sensor fiber cracks along with the structure to which it is mounted. The size of the resulting drop in detector output is indicative of the location of the crack. 8 figs.

  1. NONLINEAR ACOUSTIC IMAGING OF STRUCTURAL DAMAGES IN LAMINATED COMPOSITES

    E-Print Network [OSTI]

    Boyer, Edmond

    are performed on a carbon fiber/epoxy laminated composite plate with barely visible impact damage and requires an ever increasing accuracy of detection. A good example is the inspection of composite materials been applied to a variety of materials including rocks [4], metals [5-10] and composites [11

  2. Fungal endophytes limit pathogen damage in a tropical tree

    E-Print Network [OSTI]

    Bermingham, Eldredge

    Fungal endophytes limit pathogen damage in a tropical tree A. Elizabeth Arnold* , Luis Carlos Meji species examined to date harbors endophytic fungi within its asymptomatic aerial tissues, such that endophytes rep- resent a ubiquitous, yet cryptic, component of terrestrial plant communities. Fungal

  3. Impurity-doped optical shock, detonation and damage location sensor

    DOE Patents [OSTI]

    Weiss, Jonathan D. (Albuquerque, NM)

    1995-01-01T23:59:59.000Z

    A shock, detonation, and damage location sensor providing continuous fiber-optic means of measuring shock speed and damage location, and could be designed through proper cabling to have virtually any desired crush pressure. The sensor has one or a plurality of parallel multimode optical fibers, or a singlemode fiber core, surrounded by an elongated cladding, doped along their entire length with impurities to fluoresce in response to light at a different wavelength entering one end of the fiber(s). The length of a fiber would be continuously shorted as it is progressively destroyed by a shock wave traveling parallel to its axis. The resulting backscattered and shifted light would eventually enter a detector and be converted into a proportional electrical signals which would be evaluated to determine shock velocity and damage location. The corresponding reduction in output, because of the shortening of the optical fibers, is used as it is received to determine the velocity and position of the shock front as a function of time. As a damage location sensor the sensor fiber cracks along with the structure to which it is mounted. The size of the resulting drop in detector output is indicative of the location of the crack.

  4. acquired brain damage: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    acquired brain damage First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Virtual Reality Rehabilitation of...

  5. Dynamics and Fatigue Damage of Wind Turbine Rotors

    E-Print Network [OSTI]

    6 3 RiS0-Rr512 Dynamics and Fatigue Damage of Wind Turbine Rotors during Steady Operation Peter OF WIND TURBINE ROTORS DURING STEADY OPERATION Peter Hauge Madsen, Sten Frandsen, William E. Holley-carrying capacity of a wind turbine rotor with respect to short-term strength and material fatigue are presented

  6. Propagation of Reactions in Thermally-damaged PBX-9501

    SciTech Connect (OSTI)

    Tringe, J W; Glascoe, E A; Kercher, J R; Willey, T M; Springer, H K; Greenwood, D W; Molitoris, J D; Smilowitz, L; Henson, B F; Maienschein, J L

    2010-03-05T23:59:59.000Z

    A thermally-initiated explosion in PBX-9501 (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine) is observed in situ by flash x-ray imaging, and modeled with the LLNL multi-physics arbitrary-Lagrangian-Eulerian code ALE3D. The containment vessel deformation provides a useful estimate of the reaction pressure at the time of the explosion, which we calculate to be in the range 0.8-1.4 GPa. Closely-coupled ALE3D simulations of these experiments, utilizing the multi-phase convective burn model, provide detailed predictions of the reacted mass fraction and deflagration front acceleration. During the preinitiation heating phase of these experiments, the solid HMX portion of the PBX-9501 undergoes a {beta}-phase to {delta}-phase transition which damages the explosive and induces porosity. The multi-phase convective burn model results demonstrate that damaged particle size and pressure are critical for predicting reaction speed and violence. In the model, energetic parameters are taken from LLNL's thermochemical-kinetics code Cheetah and burn rate parameters from Son et al. (2000). Model predictions of an accelerating deflagration front are in qualitative agreement with the experimental images assuming a mode particle diameter in the range 300-400 {micro}m. There is uncertainty in the initial porosity caused by thermal damage of PBX-9501 and, thus, the effective surface area for burning. To better understand these structures, we employ x-ray computed tomography (XRCT) to examine the microstructure of PBX-9501 before and after thermal damage. Although lack of contrast between grains and binder prevents the determination of full grain size distribution in this material, there are many domains visible in thermally damaged PBX-9501 with diameters in the 300-400 {micro}m range.

  7. Strategic petroleum reserve caverns casing damage update 1997

    SciTech Connect (OSTI)

    Munson, D.E.; Molecke, M.A.; Neal, J.T. [and others

    1998-01-01T23:59:59.000Z

    Hanging casing strings are used for oil and brine transfer in the domal salt storage caverns of the Strategic Petroleum Reserve (SPR). Damage to these casings is of concern because hanging string replacement is costly and because of implications on cavern stability. Although the causes of casing damage are not always well defined, many events leading to damage are assumed to be the result of salt falls impacting the hanging strings. However, in some cases, operational aspects may be suspected. The history of damage to hanging strings is updated in this study to include the most recent events. Potential general domal and local operational and material factors that could influence the tendency for caverns to have salt falls are examined in detail. As a result of this examination, general factors, such as salt dome anomalies and crude type, and most of the operational factors, such as geometry, location and depressurizations, are not believed to be primary causes of casing damage. Further analysis is presented of the accumulation of insolubles during cavern solutioning and accumulation of salt fall material on the cavern floor. Inaccuracies in sump geometry probably make relative cavern insolubles contents uncertain. However, determination of the salt fall accumulations, which are more accurate, suggest that the caverns with the largest salt fall accumulations show the greatest number of hanging string events. There is good correlation between the accumulation rate and the number of events when the event numbers are corrected to an equivalent number for a single hanging string in a quiescent, operating cavern. The principal factor that determines the propensity for a cavern to exhibit this behavior is thought to be the effect of impurity content on the fracture behavior of salt.

  8. Fractal mechanism for characterizing singularity of mode shape for damage detection

    SciTech Connect (OSTI)

    Cao, M. S. [Department of Engineering Mechanics, Hohai University, Nanjing 210098 (China)] [Department of Engineering Mechanics, Hohai University, Nanjing 210098 (China); Ostachowicz, W. [Institute of Fluid-Flow Machinery, Polish Academy of Sciences, ul. Fiszera 14, 80-952 Gdansk (Poland) [Institute of Fluid-Flow Machinery, Polish Academy of Sciences, ul. Fiszera 14, 80-952 Gdansk (Poland); Faculty of Automotive and Construction Machinery, Warsaw University of Technology, Narbutta 84, 02-524 Warsaw (Poland); Bai, R. B., E-mail: bairunbo@gmail.com [Department of Engineering Mechanics, Shandong Agricultural University, Taian 271000 (China); Radzie?ski, M. [Institute of Fluid-Flow Machinery, Polish Academy of Sciences, ul. Fiszera 14, 80-952 Gdansk (Poland)] [Institute of Fluid-Flow Machinery, Polish Academy of Sciences, ul. Fiszera 14, 80-952 Gdansk (Poland)

    2013-11-25T23:59:59.000Z

    Damage is an ordinary physical phenomenon jeopardizing structural safety; damage detection is an ongoing interdisciplinary issue. Waveform fractal theory has provided a promising resource for detecting damage in plates while presenting a concomitant problem: susceptibility to false features of damage. This study proposes a fractal dimension method based on affine transformation to address this problem. Physical experiments using laser measurement demonstrate that this method can substantially eliminate false features of damage and accurately identify complex cracks in plates, providing a fundamental mechanism that brings the merits of waveform fractal theory into full play in structural damage detection applications.

  9. K. Pham et alii, Frattura ed Integrit Strutturale, 19 (2012) 5-19; DOI: 10.3221/IGF-ESIS.19.01 Damage localization and rupture with gradient damage models

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    2012-01-01T23:59:59.000Z

    Damage localization and rupture with gradient damage models K. Pham Université Pierre et Marie Curie of an elastic-damaging material whose softening behavior is regularized by a gradient damage model. We show that at the center of the localization zone when the damage reaches there the critical value corresponding

  10. Damage mechanics characterization on fatigue behavior of a solder joint material

    SciTech Connect (OSTI)

    Chow, C.L.; Yang, F. [Univ. of Michigan, Dearborn, MI (United States). Dept. of Mechanical Engineering; Fang, H.E. [Sandia National Labs., Albuquerque, NM (United States). Computational Physics Dept.

    1998-08-01T23:59:59.000Z

    This paper presents the first part of a comprehensive mechanics approach capable of predicting the integrity and reliability of solder joint material under fatigue loading without viscoplastic damage considerations. A separate report will be made to present a comprehensive damage model describing life prediction of the solder material under thermomechanical fatigue loading. The method is based on a theory of damage mechanics which makes possible a macroscopic description of the successive material deterioration caused by the presence of microcracks/voids in engineering materials. A damage mechanics model based on the thermodynamic theory of irreversible processes with internal state variables is proposed and used to provide a unified approach in characterizing the cyclic behavior of a typical solder material. With the introduction of a damage effect tensor, the constitutive equations are derived to enable the formulation of a fatigue damage dissipative potential function and a fatigue damage criterion. The fatigue evolution is subsequently developed based on the hypothesis that the overall damage is induced by the accumulation of fatigue and plastic damage. This damage mechanics approach offers a systematic and versatile means that is effective in modeling the entire process of material failure ranging from damage initiation and propagation leading eventually to macro-crack initiation and growth. As the model takes into account the load history effect and the interaction between plasticity damage and fatigue damage, with the aid of a modified general purpose finite element program, the method can readily be applied to estimate the fatigue life of solder joints under different loading conditions.

  11. Reasoning about Actions with Temporal Answer Sets

    E-Print Network [OSTI]

    Giordano, Laura; Dupré, Daniele Theseider

    2011-01-01T23:59:59.000Z

    In this paper we combine Answer Set Programming (ASP) with Dynamic Linear Time Temporal Logic (DLTL) to define a temporal logic programming language for reasoning about complex actions and infinite computations. DLTL extends propositional temporal logic of linear time with regular programs of propositional dynamic logic, which are used for indexing temporal modalities. The action language allows general DLTL formulas to be included in domain descriptions to constrain the space of possible extensions. We introduce a notion of Temporal Answer Set for domain descriptions, based on the usual notion of Answer Set. Also, we provide a translation of domain descriptions into standard ASP and we use Bounded Model Checking techniques for the verification of DLTL constraints.

  12. Instruction sets for Parallel Random Access Machines

    SciTech Connect (OSTI)

    Trahan, J.L.

    1988-01-01T23:59:59.000Z

    The computational powers of time-bounded Parallel Random Access Machines (PRAMs) with different instruction sets are compared. A basic PRAM can perform the following operations in unit-time: addition, subtraction, Boolean operations, comparisons, and indirect addressing. Multiple processors may concurrently read and concurrently write a single cell. This thesis establishes that the class of languages accepted in polynomial time on a PRAM(*, {up arrow}, {down arrow}) contains the class of languages accepted in exponential time on a nondeterministic Turing machine (NEXPTIME) and is contained in the class of languages accepted in exponential space on a Turing machine. Efficient simulations are presented of PRAMs with enhanced instruction sets by sequential RAMs with the same instruction sets; also simulations of probabilistic PRAMs by deterministic PRAMs, using parallelism to replace randomness. Also given are simulations of PRAM(op)s by PRAMs, where both the simulated machine and the simulating machine are exclusive-read, exclusive-write machines.

  13. Dual wavelength laser damage testing for high energy lasers.

    SciTech Connect (OSTI)

    Atherton, Briggs W.; Rambo, Patrick K.; Schwarz, Jens; Kimmel, Mark W.

    2010-05-01T23:59:59.000Z

    As high energy laser systems evolve towards higher energies, fundamental material properties such as the laser-induced damage threshold (LIDT) of the optics limit the overall system performance. The Z-Backlighter Laser Facility at Sandia National Laboratories uses a pair of such kiljoule-class Nd:Phosphate Glass lasers for x-ray radiography of high energy density physics events on the Z-Accelerator. These two systems, the Z-Beamlet system operating at 527nm/ 1ns and the Z-Petawatt system operating at 1054nm/ 0.5ps, can be combined for some experimental applications. In these scenarios, dichroic beam combining optics and subsequent dual wavelength high reflectors will see a high fluence from combined simultaneous laser exposure and may even see lingering effects when used for pump-probe configurations. Only recently have researchers begun to explore such concerns, looking at individual and simultaneous exposures of optics to 1064 and third harmonic 355nm light from Nd:YAG [1]. However, to our knowledge, measurements of simultaneous and delayed dual wavelength damage thresholds on such optics have not been performed for exposure to 1054nm and its second harmonic light, especially when the pulses are of disparate pulse duration. The Z-Backlighter Facility has an instrumented damage tester setup to examine the issues of laser-induced damage thresholds in a variety of such situations [2] . Using this damage tester, we have measured the LIDT of dual wavelength high reflectors at 1054nm/0.5ps and 532nm/7ns, separately and spatially combined, both co-temporal and delayed, with single and multiple exposures. We found that the LIDT of the sample at 1054nm/0.5ps can be significantly lowered, from 1.32J/cm{sup 2} damage fluence with 1054/0.5ps only to 1.05 J/cm{sup 2} with the simultaneous presence of 532nm/7ns laser light at a fluence of 8.1 J/cm{sup 2}. This reduction of LIDT of the sample at 1054nm/0.5ps continues as the fluence of 532nm/7ns laser light simultaneously present increases. The reduction of LIDT does not occur when the 2 pulses are temporally separated. This paper will also present dual wavelength LIDT results of commercial dichroic beam-combining optics simultaneously exposed with laser light at 1054nm/2.5ns and 532nm/7ns.

  14. Tower systems for Linearly repetitive Delone sets

    E-Print Network [OSTI]

    José Aliste-Prieto; Daniel Coronel

    2010-03-22T23:59:59.000Z

    In this paper we study linearly repetitive Delone sets and prove, following the work of Bellissard, Benedetti and Gambaudo, that the hull of a linearly repetitive Delone set admits a properly nested sequence of box decompositions (tower system) with strictly positive and uniformly bounded (in size and norm) transition matrices. This generalizes a result of Durand for linearly recurrent symbolic systems. Furthermore, we apply this result to give a new proof of a classic estimation of Lagarias and Pleasants on the rate of convergence of patch-frequencies.

  15. Aligned composite structures for mitigation of impact damage and resistance to wear in dynamic environments

    DOE Patents [OSTI]

    Mulligan, Anthony C.; Rigali, Mark J.; Sutaria, Manish P.; Popovich, Dragan; Halloran, Joseph P.; Fulcher, Michael L.; Cook, Randy C.

    2005-12-13T23:59:59.000Z

    Fibrous monolith composites having architectures that provide increased flaw insensitivity, improved hardness, wear resistance and damage tolerance and methods of manufacture thereof are provided for use in dynamic environments to mitigate impact damage and increase wear resistance.

  16. Aligned composite structures for mitigation of impact damage and resistance to wear in dynamic environments

    DOE Patents [OSTI]

    Mulligan, Anthony C. (Tucson, AZ); Rigali, Mark J. (Tucson, AZ); Sutaria, Manish P. (Malden, MA); Popovich, Dragan (Redmond, WA); Halloran, Joseph P. (Tucson, AZ); Fulcher, Michael L. (Tucson, AZ); Cook, Randy C. (Tucson, AZ)

    2009-04-14T23:59:59.000Z

    Fibrous monolith composites having architectures that provide increased flaw insensitivity, improved hardness, wear resistance and damage tolerance and methods of manufacture thereof are provided for use in dynamic environments to mitigate impact damage and increase wear resistance.

  17. Beam damage of poly(vinyl chloride) [PVC] as observed by x-ray...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    damage of poly(vinyl chloride) PVC as observed by x-ray photoelectron spectroscopy at 143 K, 303 K and 373 K. Beam damage of poly(vinyl chloride) PVC as observed by x-ray...

  18. Beam Damage of Poly(Vinyl Chloride) [PVC] Film as Observed by...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Damage of Poly(Vinyl Chloride) PVC Film as Observed by X-ray Photoelectron Spectroscopy. Beam Damage of Poly(Vinyl Chloride) PVC Film as Observed by X-ray Photoelectron...

  19. Simple Method for Estimating and Comparing of X-Ray Damage Rates...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Method for Estimating and Comparing of X-Ray Damage Rates. Simple Method for Estimating and Comparing of X-Ray Damage Rates. Abstract: This note describes an approach for...

  20. Piezoelectric-based in-situ damage detection of composite materials for structural health monitoring systems

    E-Print Network [OSTI]

    Kessler, Seth Stovack, 1977-

    2002-01-01T23:59:59.000Z

    Cost-effective and reliable damage detection is critical for the utilization of composite materials. This thesis presents the conclusions of an analytical and experimental survey of candidate methods for in-situ damage ...

  1. Structure And Radiation Damage Behavior Of Epitaxial CrxMo1-x...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    And Radiation Damage Behavior Of Epitaxial CrxMo1-x Alloy Thin Films On MgO. Structure And Radiation Damage Behavior Of Epitaxial CrxMo1-x Alloy Thin Films On MgO. Abstract:...

  2. Damage Profiles and Ion Distribution in Pt-irradiated SiC. |...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Damage Profiles and Ion Distribution in Pt-irradiated SiC. Damage Profiles and Ion Distribution in Pt-irradiated SiC. Abstract: Single crystalline 6H-SiC samples were irradiated at...

  3. A DNA Damage-Induced, SOS-Independent Checkpoint Regulates Cell Division in Caulobacter crescentus

    E-Print Network [OSTI]

    Modell, Joshua W.

    Cells must coordinate DNA replication with cell division, especially during episodes of DNA damage. The paradigm for cell division control following DNA damage in bacteria involves the SOS response where cleavage of the ...

  4. Non-linear Damage Accumulation in Au-irradiated SrTiO3. | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    leads to non-linear increase of the width of the damage profile. Citation: Zhang Y, WJ Weber, V Shutthanandan, and S Thevuthasan.2006."Non-linear Damage Accumulation in...

  5. Engineering a single cell microarray platform for high throughput DNA damage and repair analysis

    E-Print Network [OSTI]

    Weingeist, David McGregor

    2012-01-01T23:59:59.000Z

    DNA damage contributes to cancer, aging, and heritable diseases. Ironically, DNA damaging agents are also commonly used in current cancer treatment. We therefore need robust, high throughput, and inexpensive tools for ...

  6. Reducing Rally Car Damage in Forests Partnership-working with the

    E-Print Network [OSTI]

    also incurs heavy costs when repairing the road surfaces after an event. The damage caused by motor driving, fast cornering, heavy braking and rapid acceleration causes significant damage to the loose prevent oil or f

  7. Aligned composite structures for mitigation of impact damage and resistance to wear in dynamic environments

    DOE Patents [OSTI]

    Rigali, Mark J.; Sutaria, Manish P.; Mulligan, Anthony C.; Popovich, Dragan

    2004-03-23T23:59:59.000Z

    Fibrous monolith composites having architectures that provide increased flaw insensitivity, improved hardness, wear resistance and damage tolerance and methods of manufacture thereof are provided for use in dynamic environments to mitigate impact damage and increase wear resistance.

  8. Predictive storm damage modeling and optimizing crew response to improve storm response operations

    E-Print Network [OSTI]

    Whipple, Sean David

    2014-01-01T23:59:59.000Z

    Utility infrastructures are constantly damaged by naturally occurring weather. Such damage results in customer service interruption and repairs are necessary to return the system to normal operation. In most cases these ...

  9. Regulation of DNA damage tolerance : studies of the translesion synthesis DNA ploymerase eta in Saccharomyces cerevisiae

    E-Print Network [OSTI]

    Woodruff, Rachel Van Etten

    2008-01-01T23:59:59.000Z

    All organisms must control the effects of DNA damage to protect the integrity of their genomes. In addition to DNA repair, this requires DNA damage tolerance pathways, which allow the continuation of essential processes ...

  10. Review: Clearing the Air: The Health and Economic Damages of Air Pollution in China

    E-Print Network [OSTI]

    Lee, Joseph

    2009-01-01T23:59:59.000Z

    and Economic Damages of Air Pollution in China Mun S. Ho andEconomic Damages of Air Pollution in China. Cambridge, MA:the assessment of air pollution and its health and economic

  11. Martin Marietta Energy Systems, Inc. comprehensive earthquake management plan: Engineering survey building damage assessment training manual

    SciTech Connect (OSTI)

    Not Available

    1990-01-01T23:59:59.000Z

    The training objectives are: differentiate between the various levels of damage caused to buildings and structures by an earthquake and classify them as to their safety of occupancy, extent of damage, and resources needed for recovery/repair.

  12. Use of CFRP Overlays to Repair Fatigue Damage in Steel Bridge Girders and Components

    E-Print Network [OSTI]

    Gangel, Regan Elisabeth

    2012-05-31T23:59:59.000Z

    Fatigue damage in steel girder bridges built prior to the mid-1980s is common due to distortion-induced fatigue. Different repair techniques have been developed and implemented to retrofit bridges of this era with existing fatigue damage...

  13. Damage patterns caused by the burning of liquids on wood surfaces 

    E-Print Network [OSTI]

    Robinson, David

    1981-01-01T23:59:59.000Z

    Knowledge of the damage caused to timber floors by the burning of liquids is of importance in the investigation of fires where the use of accelerants is suspected. This project has examined the damage caused to a piece of ...

  14. DAMAGE DETECTION METHODS ON WIND TURBINE BLADE TESTING WITH WIRED AND WIRELESS ACCELEROMETER SENSORS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    DAMAGE DETECTION METHODS ON WIND TURBINE BLADE TESTING WITH WIRED AND WIRELESS ACCELEROMETER turbine blade. We compare the data collected from the wireless sensors against wired sensors for nonstationary blade excitations. KEYWORDS : Structural Health Monitoring, Damage Detection, Wind Turbine

  15. Quantitative measurement and modeling of the DNA damage signaling network : DNA double-strand breaks

    E-Print Network [OSTI]

    Tentner, Andrea R. (Andrea Ruth)

    2009-01-01T23:59:59.000Z

    DNA double-strand breaks (DSB) are one of the major mediators of chemotherapy-induced cytotoxicity in tumors. Cells that experience DNA damage can initiate a DNA damage-mediated cell-cycle arrest, attempt to repair the ...

  16. Damage Evolution in GaN Under MeV Heavy Ion Implantation. | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Evolution in GaN Under MeV Heavy Ion Implantation. Damage Evolution in GaN Under MeV Heavy Ion Implantation. Abstract: Damage evaluation processes in patterned GaN implanted by 3...

  17. Damage and Microstructure Evolution in GaN under Au Ion Irradiation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Microstructure Evolution in GaN under Au Ion Irradiation. Damage and Microstructure Evolution in GaN under Au Ion Irradiation. Abstract: Damage and microstructure evolution in...

  18. Damage and rupture mechanisms in an austenoferritic duplex steel

    SciTech Connect (OSTI)

    Verhaeghe, B.; Louchet, F.; Brechet, Y. [LTPCM-CNRS, St. Martin d`Heres (France). Groupe Physique du Metal] [LTPCM-CNRS, St. Martin d`Heres (France). Groupe Physique du Metal; Massoud, J.P. [EDF, Moret sur Loing (France)] [EDF, Moret sur Loing (France)

    1997-05-01T23:59:59.000Z

    The influence of ageing on damage and rupture mechanisms in an austenoferritic duplex stainless steel is studied using conventional straining and impact toughness testing at 20 C and 320 C, and in situ SEM straining at 20 C. While the as-received alloy fails in a ductile mode, damage in the aged material starts with cleavage nucleation in ferrite. The authors show that, owing to the bipercolated topology of the alloy, these cleavage cracks can propagate while passing round austenite ligaments whose plastic stretching controls the crack extension. The variations with strain of both the crack size and the average crack separation are computed analytically and their comparison gives a good prediction of ductility.

  19. Fast Neutron Damage Studies on NdFeB Materials

    E-Print Network [OSTI]

    Spencer, James; Baldwin, A; Boussoufi, Moe; Pellet, David; Volk, James T; Wolf, Zachary

    2005-01-01T23:59:59.000Z

    Many materials and electronics need to be tested for the radiation environment expected at linear colliders (LC) where the accelerator and detectors will be subjected to large fluences of hadrons, leptons and gammas over the life of the facility. Although the linacs will be superconducting, there are still many potential uses for NdFeB in the damping rings, injection and extraction lines and final focus. Our understanding of the radiation damage situation for rare earth permanent magnet materials was presented at PAC2003 and our first measurements of fast neutron, stepped doses at the UC Davis McClellan Nuclear Reactor Center (UCD MNRC) were presented at EPAC2004 where the damage appeared proportional to the distances between the effective operating points and Hc. Here we have extended those doses and included more commercial samples together with the induced radioactivities associated with their respective dopants. Hall probe data for the external induction distributions are compared with vector magnetizatio...

  20. Building Damage, Death and Downtime Risk Attenuation in Earthquakes

    E-Print Network [OSTI]

    Huang, Yinghui

    2012-07-16T23:59:59.000Z

    value over a specified amount of time, can be obtained. This was a great development in the field of probabilistic seismic hazard analysis. Kennedy et al. (1980) conducted research to study the safety of the Oyster Creek nuclear power plant... 2D structural model developed in SAP 2000; and (c) plan of ?Redbook Building? ....... 16 Figure 4 ?Scenario-based? 3d loss model: (a) seismic hazard intensity-attenuation model; (b) structural analysis; (c) damage analysis; and (d) loss...

  1. Microstructural Characterization of Material Properties and Damage in Asphalt Composites

    E-Print Network [OSTI]

    Mohammad Khorasani, Sara

    2013-05-03T23:59:59.000Z

    MICROSTRUCTURAL CHARACTERIZATION OF MATERIAL PROPERTIES AND DAMAGE IN ASPHALT COMPOSITES A Thesis by SARA MOHAMMAD KHORASANI Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment... Engineering Copyright 2013 Sara Mohammad Khorasani ii ABSTRACT Asphalt composites are used to construct 90% of roads in the United States. These composites consist of asphalt binder, which is a product of the refinery process of oil, aggregates...

  2. Assessment of damage to geomembrane liners by shredded scrap tires

    SciTech Connect (OSTI)

    Reddy, K.R.; Saichek, R.E. [Univ. of Illinois, Chicago, IL (United States). Dept. of Civil and Materials Engineering

    1998-12-01T23:59:59.000Z

    This paper presents the results of a field and laboratory study performed to assess damage to the geomembrane liner caused by using shredded scrap tires as a leachate drainage layer material in landfills. The field testing was performed to assess the damage that occurred to the geomembrane liner during construction and included nine tests conducted with different combinations of tire chip size and thickness, both with a geotextile and without a geotextile overlying the geomembrane, and under different loading conditions. The laboratory testing was performed to characterize the shredded tires, particularly their size distribution, hydraulic conductivity, compressibility, and chemical resistance. The laboratory testing also included performing simulation testing to determine the extent of damage that occurs to the geomembrane liner by the shredded tires under long-term waste-loading conditions. the damage that occurred to the geomembrane liners in both field tests and simulated laboratory tests was determined by visual observations as well as by conducting multi-axial tension tests, wide strip tension tests, and water vapor transmission tests on the exhumed geomembrane samples. Based on these results, a 0.46-m thick layer of secondary shred tire chips, with an average size of 7.6 cm, placed over a 543-g/m{sup 2} geotextile installed over a geomembrane liner using low-ground-pressure (<58 kPa) equipment was determined to provide adequate protection in the geomembrane liner during construction. The degree of protection offered under long-term loading conditions depends on the normal stress and the random orientation of the shredded tire chips at the geomembrane interface.

  3. Conserved and Unconventional Responses to DNA Damage in Tetrahymena

    E-Print Network [OSTI]

    Sandoval Oporto, Pamela

    2012-07-16T23:59:59.000Z

    ongoing genome instability ............................................................ 60 Elevated levels of DNA damage in MMS-treated TIF1 mutants ... 61 Differential regulation of TIF1 and RAD51 in MMS-treated cells... ................................ 59 2.2 Micronuclear genome instability in TIF1-deficient T. thermophila .......... 62 2.3 Regulation of RAD51 and TIF1 by MMS ................................................. 66 2.4 Immunolocalization of Rad51p and Tif1p in control and MMS...

  4. Continuum-based Multiscale Computational Damage Modeling of Cementitous Composites

    E-Print Network [OSTI]

    Kim, Sun-Myung

    2011-08-08T23:59:59.000Z

    -damage constitutive model, the effect of the micromechanical properties of concrete, such as aggregate shape, distribution, and volume fraction, the ITZ thickness, and the strength of the ITZ and mortar matrix on the iv tensile behavior of concrete... Page 7.1 2-D Meso-scale Analysis Model of Concrete ................................ 103 7.2 Material Properties of the ITZ and Mortar Matrix ......................... 104 7.3 The Effect of the Aggregate Shape...

  5. Sets and Constraint Logic Programming Agostino Dovier

    E-Print Network [OSTI]

    Rossi, Gianfranco

    supported by NSF Grants CCR-9900320, CDA-9729848, EIA-9810732, CCR-9820852, CCR-9875279. Author's addresses emerged in the area of database languages, and more speci#12;cally in the context of deductive databases-#12;rst nor- mal form database models [Makinouchi 1977], where sets have been advoca

  6. Transformations between symmetric sets of quantum states

    E-Print Network [OSTI]

    Vedran Dunjko; Erika Andersson

    2012-06-22T23:59:59.000Z

    We investigate probabilistic transformations of quantum states from a `source' set to a `target' set of states. Such transforms have many applications. They can be used for tasks which include state-dependent cloning or quantum state discrimination, and as interfaces between systems whose information encodings are not related by a unitary transform, such as continuous-variable systems and finite-dimensional systems. In a probabilistic transform, information may be lost or leaked, and we explain the concepts of leak and redundancy. Following this, we show how the analysis of probabilistic transforms significantly simplifies for symmetric source and target sets of states. In particular, we give a simple linear program which solves the task of finding optimal transforms, and a method of characterizing the introduced leak and redundancy in information-theoretic terms. Using the developed techniques, we analyse a class of transforms which convert coherent states with information encoded in their relative phase to symmetric qubit states. Each of these sets of states on their own appears in many well studied quantum information protocols. Finally, we suggest an asymptotic realization based on quantum scissors.

  7. Imperfect World of $??$-decay Nuclear Data Sets

    E-Print Network [OSTI]

    B. Pritychenko

    2015-01-09T23:59:59.000Z

    The precision of double-beta ($\\beta\\beta$) decay experimental half lives and their uncertainties is reanalyzed. The method of Benford's distributions has been applied to nuclear reaction, structure and decay data sets. First-digit distribution trend for $\\beta\\beta$-decay T$_{1/2}^{2\

  8. Rate Setting for Small Water Systems 

    E-Print Network [OSTI]

    Dozier, Monty; Theodori, Gene L.; Jensen, Ricard

    2007-03-28T23:59:59.000Z

    Jensen, Assistant Research Scientist, Texas Water Resources Institute; The Texas A&M University System K Knowing how to set the proper rate for water service is a daunting challenge for small water systems. The rates must be high enough to re- cover...

  9. Setting-less Protection Final Project Report

    E-Print Network [OSTI]

    Fan Yonghee Lee Liangyi Sun Zhenyu Tan #12;Executive Summary The capabilities of protective relays technologies that may have an impact on protective relaying. The goal was to challenge the research community examined that may lead to setting-less protection schemes, such as (a) adaptive relaying, (b) component

  10. Dominating Set on Bipartite Graphs Mathieu Liedloff

    E-Print Network [OSTI]

    Liedloff, Mathieu

    .5263n ) time algorithm using polynomial space and an O(1.5137n ) time algorithm using exponential space ) time and polynomial space algorithm, and an O(1.5063n ) time algorithm that uses exponential space. We]). Known results. Given a graph G = (V, E), a subset D V is a dominating set of G if every vertex of V

  11. Chem 249 Problem Set 4 Winter 2014

    E-Print Network [OSTI]

    Chem 249 Problem Set 4 R. Corn Winter 2014 Basic Quantum Theory and Energy Levels in Spectroscopy). #12;2. Consider the NMR spectrum of a deuterium atom, which has a nuclear spin I of 1. a, the component of the nuclear spin in the direction of the magnetic field. Draw an energy level diagram

  12. A 3D Orthotropic Strain-Rate Dependent Elastic Damage Material Model.

    SciTech Connect (OSTI)

    English, Shawn Allen

    2014-09-01T23:59:59.000Z

    A three dimensional orthotropic elastic constitutive model with continuum damage and cohesive based fracture is implemented for a general polymer matrix composite lamina. The formulation assumes the possibility of distributed (continuum) damage followed b y localized damage. The current damage activation functions are simply partially interactive quadratic strain criteria . However, the code structure allows for changes in the functions without extraordinary effort. The material model formulation, implementation, characterization and use cases are presented.

  13. SALT DAMAGE CRITERION PROOF-OF-CONCEPT RESEARCH

    SciTech Connect (OSTI)

    Kerry L. DeVries; Kirby D. Mellegard; Gary D. Callahan

    2002-11-01T23:59:59.000Z

    The purpose of this study was to conduct a field-scale application demonstrating the use of continuum damage mechanics to determine the minimum allowable operating pressure of compressed natural gas storage caverns in salt formations. A geomechanical study was performed of two natural gas storage caverns (one existing and one planned) utilizing state-of-the-art salt mechanics to assess the potential for cavern instability and collapse. The geomechanical study consisted primarily of laboratory testing, theoretical development, and analytical/numerical tasks. A total of 50 laboratory tests was performed on salt specimens to aid in the development and definition of the material model used to predict the behavior of rock salt. Material model refinement was performed that improved the predictive capability of modeling salt during damage healing, recovery of work-hardened salt, and the behavior of salt at stress states other than triaxial compression. Results of this study showed that the working gas capacity of the existing cavern could be increased by 18 percent and the planned cavern could be increased by 8 percent using the proposed method compared to a conventional stress-based method. Further refinement of the continuum damage model is recommended to account for known behavior of salt at stress conditions other than triaxial compression that is not characterized accurately by the existing model.

  14. Economic Damages from Climate Change: An Assessment of Market Impacts

    E-Print Network [OSTI]

    Hanemann, W Michael; Dale, Larry

    2006-01-01T23:59:59.000Z

    the affects of climate change on agriculture in irrigatedmarket impacts from climate change on US agriculture and onimpacts of climate change on US agriculture. The first set

  15. Hurricane Damage Sustained by the Oyster Industry and the Oyster Reefs Across the Galveston Bay System

    E-Print Network [OSTI]

    Hurricane Damage Sustained by the Oyster Industry and the Oyster Reefs Across the Galveston Bay., Russell J. Miget, and Lawrence L. Falconer. "Hurricane Damage Sustained by the Oyster Industry-1412. Tel: 361/265-9203, Fax: 361/265-9434, E-mail: l-falconer@tamu.edu. Hurricane Damage Sustained

  16. United States hurricane landfalls and damages: Can one-to five-year predictions beat climatology?

    E-Print Network [OSTI]

    Colorado at Boulder, University of

    United States hurricane landfalls and damages: Can one-to five-year predictions beat climatology-year predictions of United States hurricane landfalls and damages improve upon a baseline expectation derived from these improvements were due to chance or actual skill. A review of efforts to predict hurricane landfalls and damage

  17. DETECTION OF IMPULSE-LIKE AIRBORNE SOUND FOR DAMAGE IDENTIFICATION IN ROTOR BLADES OF WIND TURBINES

    E-Print Network [OSTI]

    Boyer, Edmond

    DETECTION OF IMPULSE-LIKE AIRBORNE SOUND FOR DAMAGE IDENTIFICATION IN ROTOR BLADES OF WIND TURBINES burdens of wind turbines. To detect damage of rotor blades, several research projects focus on an acoustic, rotor blade, wind turbine INTRODUCTION There are several publications of non destructive damage

  18. Do Damaged Proteins Accumulate in Caenorhabditis elegans L-Isoaspartate Methyltransferase (pcm-1)

    E-Print Network [OSTI]

    Clarke, Steven

    Do Damaged Proteins Accumulate in Caenorhabditis elegans L-Isoaspartate Methyltransferase (pcm-1 for helping to limit the accumulation of damaged proteins in aging or- ganisms. In this study, the effect Caenorhabditis elegans. It was found that damaged proteins recognized by this enzyme accumulated to significant

  19. Random sequential adsorption model of damage and crack accumulation: Exact one-dimensional results

    E-Print Network [OSTI]

    O. Gromenko; V. Privman; M. L. Glasser

    2008-04-29T23:59:59.000Z

    The random sequential adsorption (RSA) model is modified to describe damage and crack accumulation. The exclusion for object deposition (for damaged region formation) is not for the whole object, as in the standard RSA, but only for the initial point (or higher-dimensional defect) from which the damaged region or crack initiates. The one-dimensional variant of the model is solved exactly.

  20. DNA Strand Damage Product Analysis Provides Evidence That the Tumor Cell-Specific Cytotoxin Tirapazamine

    E-Print Network [OSTI]

    Gates, Kent. S.

    DNA Strand Damage Product Analysis Provides Evidence That the Tumor Cell-Specific Cytotoxin DNA strand damage that is initiated by the abstraction of hydrogen atoms from the deoxyribose damage. We find that the action of TPZ on duplex DNA under hypoxic conditions generates 5-methylene-2

  1. DAMAGE DETECTION AND LOCALISATION USING MODE-BASED METHOD AND PERTURBATION THEORY

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    DAMAGE DETECTION AND LOCALISATION USING MODE-BASED METHOD AND PERTURBATION THEORY Alaa Hamze1 analysis technique. The damage is considered as a local perturbation of Young's modulus. Finally, the localisation of damage is done using classical modal-based methods and perturbation theory. The frequency

  2. Anisotropic damage modelling of biaxial behaviour and rupture of concrete structures

    E-Print Network [OSTI]

    Boyer, Edmond

    Anisotropic damage modelling of biaxial behaviour and rupture of concrete structures Ragueneau F with damage induced anisotropy modelling for concrete-like materials. A thermodynamics based constitutive relationship is presented coupling anisotropic damage and elasticity. The biaxial behaviour of such a model

  3. A QUASISTATIC EVOLUTION MODEL FOR THE INTERACTION BETWEEN FRACTURE AND DAMAGE

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    A QUASISTATIC EVOLUTION MODEL FOR THE INTERACTION BETWEEN FRACTURE AND DAMAGE JEAN- tinuum which undergoes damage and possibly fracture. In both cases, the model appears to be ill posed so that the material prefers to form microstructures through the creation of fine mix- tures between the damaged

  4. MODELING OF DAMAGE AND LIFETIME ANALYSIS OF PLASMA FACING COMPONENTS DURING PLASMA INSTABILITIES IN TOKAMAKS

    E-Print Network [OSTI]

    Harilal, S. S.

    MODELING OF DAMAGE AND LIFETIME ANALYSIS OF PLASMA FACING COMPONENTS DURING PLASMA INSTABILITIES of the damage will essentially depend on the intensity and duration of energy deposited on PFC. Both bulk and surface damages can take place depending on these parameters. For this reason different deposition times

  5. Collateral damage: Evolution with displacement of fracture distribution and secondary fault strands in fault

    E-Print Network [OSTI]

    Savage, Heather M.

    Collateral damage: Evolution with displacement of fracture distribution and secondary fault strands in fault damage zones Heather M. Savage1,2 and Emily E. Brodsky1 Received 22 April 2010; revised 10 of fracture distributions as a function of displacement to determine whether damage around small and large

  6. Identifying damage locations under ambient vibrations utilizing vector autoregressive models and Mahalanobis distances

    E-Print Network [OSTI]

    Identifying damage locations under ambient vibrations utilizing vector autoregressive models Keywords: Damage location Ambient vibration Vector Autoregressive model Statistical pattern recognition Bridges Structural health monitoring a b s t r a c t This paper presents a study for identifying damage

  7. DAMAGE IDENTIFICATION IN A BENCHMARK CABLE-STAYED BRIDGE USING THE INTERPOLATION METHOD

    E-Print Network [OSTI]

    Boyer, Edmond

    DAMAGE IDENTIFICATION IN A BENCHMARK CABLE-STAYED BRIDGE USING THE INTERPOLATION METHOD Marco mariagiuseppina.limongelli@polimi.it ABSTRACT In this paper the damage localization algorithm based on Operational Deformed Shapes (ODS) and known as Interpolation Damage Detection Method (IDDM), is applied

  8. Damage mechanisms identification of polymer based composite materials: time-frequency investigation of

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Damage mechanisms identification of polymer based composite materials: time-frequency investigation 2012, Nantes, France 2045 #12;Presented in this paper, a time-frequency damage characterization Emission (AE) signals by the Hilbert-Huang transform (HHT). It is to be noted that the study of damage

  9. Damage Identification for Bridges Using Frequency and Time Domain Data Amir Ardalan Mosavi1

    E-Print Network [OSTI]

    Damage Identification for Bridges Using Frequency and Time Domain Data Amir Ardalan Mosavi1 Error predictions of the ARX model x , y Standard deviations of the prediction errors DF,H , DF,D Damage Features calculated for healthy and damaged conditions of the structure f(DF,H) , g(DF,D) Probability

  10. Damage Identification in Aging Aircraft Structures with Piezoelectric Wafer Active Sensors

    E-Print Network [OSTI]

    Giurgiutiu, Victor

    Damage Identification in Aging Aircraft Structures with Piezoelectric Wafer Active Sensors VICTOR of structural damage such as fatigue cracks and corrosion. Two main detection strategies are considered: (a) the wave propagation method for far-field damage detection; and (b) the electro-mechanical (E/M) impedance

  11. Damage detection on a full-scale highway sign structure with a distributed wireless sensor network

    E-Print Network [OSTI]

    Lu, Chenyang

    Damage detection on a full-scale highway sign structure with a distributed wireless sensor network highway sign support structure to investigate the ability to use vibration response data to detect damage induced in the structure. A multi-level damage detection strategy is employed for this structure

  12. Damage to nearby divertor components of ITER-like devices during giant ELMs and disruptions

    E-Print Network [OSTI]

    Harilal, S. S.

    Damage to nearby divertor components of ITER-like devices during giant ELMs and disruptions. Fusion 50 (2010) 115004 (7pp) doi:10.1088/0029-5515/50/11/115004 Damage to nearby divertor components. The simulation results of the integrated modelling indicate a significant potential damage of the divertor nearby

  13. Damage Rate in V.V. -1 -M. Youssef, UCLA MZY_APEX_98_1

    E-Print Network [OSTI]

    California at Los Angeles, University of

    Damage Rate in V.V. -1 - M. Youssef, UCLA MZY_APEX_98_1 APEX Study Memorandum March 24.1998 Title: Damage Rate in V.V. as a Function of Convective Layer Thickness To: APEX Study Participants From: Mahmoud: Preliminary calculations were performed to access the damage rate in the vacuum vessel as a function

  14. Bridge Damage and Repair Costs from Hurricane Katrina Jamie Padgett1

    E-Print Network [OSTI]

    Padgett, Jamie Ellen

    Bridge Damage and Repair Costs from Hurricane Katrina Jamie Padgett1 ; Reginald DesRoches2 ; Bryant caused significant damage to the transportation system in the Gulf Coast region. The overall cost to repair or replace the bridges damaged during the hurricane is estimated at over $1 billion. This paper

  15. STRUCTURAL-DAMAGE DETECTION BY DISTRIBUTED PIEZOELECTRIC TRANSDUCERS AND TUNED ELECTRIC CIRCUITS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    STRUCTURAL-DAMAGE DETECTION BY DISTRIBUTED PIEZOELECTRIC TRANSDUCERS AND TUNED ELECTRIC CIRCUITS F Geotecnica, Rome, Italy A novel technique for damage detection of structures is introduced and discussed measurements, it allows for accurate results in the identification and localization of damages. Use

  16. Urban damage assessment using multimodal QuickBird images and ancillary data: the Bam and

    E-Print Network [OSTI]

    Boyer, Edmond

    Urban damage assessment using multimodal QuickBird images and ancillary data: the Bam proved its usefulness for the crisis mitigation through situation report and damage assessment. Visual. We propose a semi-automatic damage assessment method based on a pair of very high spatial resolution

  17. A Methodology for Weapon System Availability Assessment, incorporating Failure, Damage and

    E-Print Network [OSTI]

    Boyer, Edmond

    A Methodology for Weapon System Availability Assessment, incorporating Failure, Damage systems can become unavailable due to system failures or damage to the system; in both cases, system the more specific availability studies take battlefield damage into account. This paper aims to define

  18. Erosion Damage of Nearby Plasma-Facing Components during a Disruption on the Divertor Plate*

    E-Print Network [OSTI]

    Harilal, S. S.

    Erosion Damage of Nearby Plasma-Facing Components during a Disruption on the Divertor Plate* A those of the United States Governmentor any agency thereof. #12;Erosion Damage of Nearby Plasma radiation emitted by heating of the vapor cloud. This radiation energy can cause serious erosion damage

  19. Damage and seismic velocity structure of pulverized rocks near the San Andreas Fault

    E-Print Network [OSTI]

    Ben-Zion, Yehuda

    Damage and seismic velocity structure of pulverized rocks near the San Andreas Fault Marieke Rempe south of Littlerock, California. The examined site has a strongly asymmetric damage structure with respect to the SAF core. The conglomerates to the southwest show little to no damage, whereas a ~100 m

  20. Antaphid interactions on Asclepias syriaca are mediated by plant genotype and caterpillar damage

    E-Print Network [OSTI]

    Mooney, Kailen A.

    1 Ant­aphid interactions on Asclepias syriaca are mediated by plant genotype and caterpillar damage in induced responses to herbivory. Here we test whether induced responses to leaf damage and genotypic-way factorial field experiment manipulating plant genotype, leaf damage by specialist monarch caterpillars

  1. STRUCTURAL DAMAGE CLASSIFICATION COMPARISON USING SUPPORT VECTOR MACHINE AND BAYESIAN MODEL SELECTION

    E-Print Network [OSTI]

    Boyer, Edmond

    STRUCTURAL DAMAGE CLASSIFICATION COMPARISON USING SUPPORT VECTOR MACHINE AND BAYESIAN MODEL, CA, USA 92093-0085 mdtodd@ucsd.edu ABSTRACT Since all damage identification strategies inevitably in the decision-making process of damage detection, classification, and prognosis, which employs training data (or

  2. Upregulation of soluble epoxide hydrolase in proximal tubular cells mediated proteinuria-induced renal damage

    E-Print Network [OSTI]

    Hammock, Bruce D.

    -induced renal damage Qian Wang,1,3 * Wei Pang,2 * Zhuan Cui,1 Junbao Shi,1 Yan Liu,2 Bo Liu,2 Yunfeng Zhou,2- lase in proximal tubular cells mediated proteinuria-induced renal damage. Am J Physiol Renal Physiol. To investigate the role of sEH in proteinuria-induced renal damage, we incubated purified urine protein from

  3. Robust damage assessment of multiple cracks based on the Frequency Response Function and the Constitutive Relation

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Robust damage assessment of multiple cracks based on the Frequency Response Function a damage assessment technique for the non destructive detection and sizing of multiple open cracks in beams, many researchers have performed extensive investigations and damage assess- ment techniques based

  4. Damage Identification in Aging Aircraft Structures with Piezoelectric Wafer Active Sensors

    E-Print Network [OSTI]

    Giurgiutiu, Victor

    Damage Identification in Aging Aircraft Structures with Piezoelectric Wafer Active Sensors VICTOR the onset and progress of structural damage such as fatigue cracks and corrosion. Two main detection strategies are considered: (a) the wave propagation method for far-field damage detection; and (b

  5. DAMAGE DETECTION BASED ON STRUCTURAL RESPONSE TO TEMPERATURE CHANGES AND MODEL UPDATING

    E-Print Network [OSTI]

    Boyer, Edmond

    DAMAGE DETECTION BASED ON STRUCTURAL RESPONSE TO TEMPERATURE CHANGES AND MODEL UPDATING Marian The paper proposes use of measured structural response to temperature loads for purposes of damage identification. As opposed to the most common approaches, which rely on suppressing temperature effects in damage

  6. N d'ordre : 2011-ISAL-0147 Annee 2011 Ductile damage characterization in

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    N d'ordre : 2011-ISAL-0147 Ann´ee 2011 Th`ese Ductile damage characterization in Dual-Phase steels-5Oct2012 #12;Ductile damage characterization in Dual-Phase steels using X-ray tomography Abstract to stress and to damage, the Dual-Phase steels (DP) present an acceptable strength/ductility compromise

  7. What's the Damage? Assessing the Costs of Spatial Closures to Protect Corals and

    E-Print Network [OSTI]

    What's the Damage? Assessing the Costs of Spatial Closures to Protect Corals and Sponges from.: 588 Title of Project: What's the damage? Assessing the costs of spatial closures to protect corals for protecting corals and sponges from potential damage by bottom trawling. However, closures can be challenging

  8. PLASTICITY OF DAMAGED SOLIDS AND SHEAR BAND LOCALIZATION MARIA K.DUSZEK and PIOTR PERZYNA

    E-Print Network [OSTI]

    Boyer, Edmond

    694 PLASTICITY OF DAMAGED SOLIDS AND SHEAR BAND LOCALIZATION MARIA K.DUSZEK and PIOTR PERZYNA of shear band localization conditions for finite elastic-plastic rate independent deformations of damaged for elastic-plastic solids when iso- tropic and kinematic hardening effects and micro-damage process are taken

  9. Adaptive modeling of environmental e ects in modal parameters for damage detection in civil structures

    E-Print Network [OSTI]

    Stanford University

    Adaptive modeling of environmental e ects in modal parameters for damage detection in civil parameters due to temperature changes from those caused by structural damage or other environmental e ects to environmental factors can be far larger than those caused by structural damage. During damp weather, for example

  10. DNA repair efficiency in germ cells and early mouse embryos and consequences for radiation-induced transgenerational genomic damage

    E-Print Network [OSTI]

    Marchetti, Francesco

    2009-01-01T23:59:59.000Z

    Kastan, M. B. (1997). DNA damage induces phosphorylation ofby ATM in response to DNA damage. Science 281, Barber, R. ,Nussenzweig, A. (2002). DNA damage-induced G2-M checkpoint

  11. Functional role of p53 N-terminal phosphorylation in regulating the p53 response to DNA damage

    E-Print Network [OSTI]

    Chao, Connie

    2006-01-01T23:59:59.000Z

    the p53 Responses to DNA Damage. Proc. Natl. Acad. Sci. USAapoptosis following DNA damage. EMBO J. 19, 4967-4975. Chao,Herrlich, P. (1999). DNA damage induced p53 stabilization:

  12. ATM Phosphorylates and Activates the Transcription Factor MEF2D for Neuronal Survival in Response to DNA Damage

    E-Print Network [OSTI]

    Chan, Shing Fai

    2009-01-01T23:59:59.000Z

    by ATM in response to DNA damage. Science, 281, 1674-1677.J. and Kastan M. B. (2003). DNA damage activates ATM throughgene product causes oxidative damage in target organs. Proc.

  13. Structural health monitoring algorithm comparisons using standard data sets

    SciTech Connect (OSTI)

    Figueiredo, Eloi; Park, Gyuhae; Figueiras, Joaquim; Farrar, Charles; Worden, Keith

    2009-03-01T23:59:59.000Z

    The real-world structures are subjected to operational and environmental condition changes that impose difficulties in detecting and identifying structural damage. The aim of this report is to detect damage with the presence of such operational and environmental condition changes through the application of the Los Alamos National Laboratory’s statistical pattern recognition paradigm for structural health monitoring (SHM). The test structure is a laboratory three-story building, and the damage is simulated through nonlinear effects introduced by a bumper mechanism that simulates a repetitive impact-type nonlinearity. The report reviews and illustrates various statistical principles that have had wide application in many engineering fields. The intent is to provide the reader with an introduction to feature extraction and statistical modelling for feature classification in the context of SHM. In this process, the strengths and limitations of some actual statistical techniques used to detect damage in the structures are discussed. In the hierarchical structure of damage detection, this report is only concerned with the first step of the damage detection strategy, which is the evaluation of the existence of damage in the structure. The data from this study and a detailed description of the test structure are available for download at: http://institute.lanl.gov/ei/software-and-data/.

  14. Damage Identification Study of a Seven-story Full-scale Building Slice Tested on the UCSD-NEES Shake Table

    E-Print Network [OSTI]

    Moaveni, Babak; He, Xianfei; Resterpo, Jose I; Conte, Joel P

    2010-01-01T23:59:59.000Z

    Restrepo JI, Elgamal A. Damage identification of a seven-review of vibration-based damage identifi- cation methods.Detection of structural damage through changes in frequency:

  15. ARM Cloud Retrieval Ensemble Data Set (ACRED)

    SciTech Connect (OSTI)

    Zhao, C; Xie, S; Klein, SA; McCoy, R; Comstock, JM; Delanoë, J; Deng, M; Dunn, M; Hogan, RJ; Jensen, MP; Mace, GG; McFarlane, SA; O’Connor, EJ; Protat, A; Shupe, MD; Turner, D; Wang, Z

    2011-09-12T23:59:59.000Z

    This document describes a new Atmospheric Radiation Measurement (ARM) data set, the ARM Cloud Retrieval Ensemble Data Set (ACRED), which is created by assembling nine existing ground-based cloud retrievals of ARM measurements from different cloud retrieval algorithms. The current version of ACRED includes an hourly average of nine ground-based retrievals with vertical resolution of 45 m for 512 layers. The techniques used for the nine cloud retrievals are briefly described in this document. This document also outlines the ACRED data availability, variables, and the nine retrieval products. Technical details about the generation of ACRED, such as the methods used for time average and vertical re-grid, are also provided.

  16. Generalising canonical extension to the categorical setting

    E-Print Network [OSTI]

    Coumans, Dion

    2012-01-01T23:59:59.000Z

    Canonical extension has proven to be a powerful tool in algebraic study of propositional logics. In this paper we describe a generalization of the theory of canonical extension to the setting of first order logic. We define a notion of canonical extension for coherent categories. These are the categorical analogues of distributive lattices and they provide categorical semantics for coherent logic. We describe a universal property of our construction and show that it generalises the existing notion of canonical extension for distributive lattices. Our new construction for coherent categories has led us to an alternative description of the topos of types, introduced by Makkai in the late seventies. This allows us to give new and transparent proofs of some properties of the action of the topos of types construction on morphisms. Furthermore, we prove a new result relating, for a coherent category, its topos of types to its category of models (in Sets).

  17. Remote temperature-set-point controller

    DOE Patents [OSTI]

    Burke, W.F.; Winiecki, A.L.

    1984-10-17T23:59:59.000Z

    An instrument is described for carrying out mechanical strain tests on metallic samples with the addition of means for varying the temperature with strain. The instrument includes opposing arms and associated equipment for holding a sample and varying the mechanical strain on the sample through a plurality of cycles of increasing and decreasing strain within predetermined limits, circuitry for producing an output signal representative of the strain during the tests, apparatus including a a set point and a coil about the sample for providing a controlled temperature in the sample, and circuitry interconnected between the strain output signal and set point for varying the temperature of the sample linearly with strain during the tests.

  18. Insulin signaling, dietary restriction and DNA damage : multiple roles for smk-1 in the mediation of C. elegans life span

    E-Print Network [OSTI]

    Wolff, Suzanne Christine

    2008-01-01T23:59:59.000Z

    role of oxidative damage and environmental stresses. Natureand environmental insults drive the accumulation of DNA damageenvironmental state. While age- related decay still occurs (due to oxidative damage and

  19. Laser damage resistant pits in dielectric coatings created by femtosecond laser machining

    SciTech Connect (OSTI)

    Wolfe, J; Roger Qiu, ,; Stolz, C; Thomas, M; Martinez, C; Ozkan, A

    2009-11-03T23:59:59.000Z

    Replacing growing damage sites with benign, laser damage resistant features in multilayer dielectric films may enable large mirrors to be operated at significantly higher fluences. Laser damage resistant features have been created in high reflecting coatings on glass substrates using femtosecond laser machining. These prototype features have been damage tested to over 40 J/cm{sup 2} (1064nm, 3ns pulselength) and have been shown not to damage upon repeated irradiation at 40J/cm{sup 2}. Further work to optimize feature shape and laser machining parameters is ongoing.

  20. Laser-induced damage threshold of silicon in millisecond, nanosecond, and picosecond regimes

    SciTech Connect (OSTI)

    Wang, X.; Shen, Z. H.; Lu, J.; Ni, X. W. [School of Science, Nanjing University of Science and Technology, Nanjing 210094 (China)

    2010-08-15T23:59:59.000Z

    Millisecond, nanosecond, and picosecond laser pulse induced damage thresholds on single-crystal are investigated in this study. The thresholds of laser-induced damage on silicon are calculated theoretically for three pulse widths based on the thermal damage model. An axisymmetric mathematical model is established for the transient temperature field of the silicon. Experiments are performed to test the damage thresholds of silicon at various pulse widths. The results indicate that the damage thresholds obviously increase with the increasing of laser pulse width. Additionally, the experimental results agree well with theoretical calculations and numerical simulation results.

  1. Thermodynamic damage mechanism of transparent films caused by a low-power laser

    SciTech Connect (OSTI)

    Xia Zhilin; Shao Jianda; Fan Zhengxiu; Wu Shigang

    2006-11-10T23:59:59.000Z

    A new model for analyzing the laser-induced damage process is provided. In many damage pits, the melted residue can been found. This is evidence of the phase change of materials. Therefore the phase change of materials is incorporated into the mechanical damage mechanism of films. Three sequential stages are discussed: no phase change, liquid phase change, and gas phase change. To study the damage mechanism and process, two kinds of stress have been considered: thermal stress and deformation stress. The former is caused by the temperature gradient and the latter is caused by high-pressure drive deformation. The theory described can determine the size of the damage pit.

  2. Multiplexed photography : single-exposure capture of multiple camera settings

    E-Print Network [OSTI]

    Green, Paul Elijah

    2009-01-01T23:59:59.000Z

    The space of camera settings is large and individual settings can vary dramatically from scene to scene. This thesis explores methods for capturing and manipulating multiple camera settings in a single exposure. Multiplexing ...

  3. Field dependent emission rates in radiation damaged GaAs

    SciTech Connect (OSTI)

    Fleming, R. M.; Myers, S. M.; Wampler, W. R.; Lang, D. V.; Seager, C. H.; Campbell, J. M. [Sandia National Laboratories, Albuquerque, New Mexico 87185-1415 (United States)

    2014-07-07T23:59:59.000Z

    We have measured the temperature and field dependence of emission rates from five traps in electron damaged GaAs. Four of the traps have previously been identified as radiation defects. One of the traps, seen in higher doped diodes, has not been previously identified. We have fit the data to a multiphonon emission theory that allows recombination in GaAs to be characterized over a broad range of temperature and electric field. These results demonstrate an efficient method to calculate field-dependent emission rates in GaAs.

  4. Simulation of neutron radiation damage in silicon semiconductor devices.

    SciTech Connect (OSTI)

    Shadid, John Nicolas; Hoekstra, Robert John; Hennigan, Gary Lee; Castro, Joseph Pete Jr.; Fixel, Deborah A.

    2007-10-01T23:59:59.000Z

    A code, Charon, is described which simulates the effects that neutron damage has on silicon semiconductor devices. The code uses a stabilized, finite-element discretization of the semiconductor drift-diffusion equations. The mathematical model used to simulate semiconductor devices in both normal and radiation environments will be described. Modeling of defect complexes is accomplished by adding an additional drift-diffusion equation for each of the defect species. Additionally, details are given describing how Charon can efficiently solve very large problems using modern parallel computers. Comparison between Charon and experiment will be given, as well as comparison with results from commercially-available TCAD codes.

  5. The damage function approach for estimating fuel cycle externalities

    SciTech Connect (OSTI)

    Lee, R.

    1993-10-01T23:59:59.000Z

    This paper discusses the methodology used in a study of fuel cycle externalities sponsored by the US Department of Energy and the Commission of the European Communities. The methodology is the damage function approach. This paper describes that approach and discusses its application and limitations. The fuel cycles addressed are those in which coal, biomass, oil, hydro, natural gas and uranium are used to generate electric power. The methodology is used to estimate the physical impacts of these fuel cycles on environmental resources and human health, and the external costs and benefits of these impacts.

  6. An investigation of damage accumulation in graphite/epoxy laminates

    E-Print Network [OSTI]

    Norvell, Robert Gerald

    1985-01-01T23:59:59.000Z

    in Specimen A-4, [0/90?] , 98$ Ft s tu Crack Angle and Length Distribution in Specimen 8-5, [0/90, ] , 94$ s tu Crack Angle and Length Distribution in Specimen C-S, [0/90, ] , 91$ Ft . . ~ Crack Angle and Length Distribution in Specimen E-9, tO /90... August 1985 Major Subject: Aerospace Engineering AN INVESTIGATION OF DAMAGE ACCUMULATION IN GRAPHITE/EPOXY LAMINATES A Thesis by ROBERT GERALD NORVELL Approved as to style and content by: David H. Allen (Co-Chair of C mmitt. ) Richard A. Schap...

  7. Blade reliability collaborative : collection of defect, damage and repair data.

    SciTech Connect (OSTI)

    Ashwill, Thomas D.; Ogilvie, Alistair B.; Paquette, Joshua A.

    2013-04-01T23:59:59.000Z

    The Blade Reliability Collaborative (BRC) was started by the Wind Energy Technologies Department of Sandia National Laboratories and DOE in 2010 with the goal of gaining insight into planned and unplanned O&M issues associated with wind turbine blades. A significant part of BRC is the Blade Defect, Damage and Repair Survey task, which will gather data from blade manufacturers, service companies, operators and prior studies to determine details about the largest sources of blade unreliability. This report summarizes the initial findings from this work.

  8. Radiation damage monitoring of the ATLAS pixel detector

    E-Print Network [OSTI]

    Seidel, Sally; The ATLAS collaboration

    2015-01-01T23:59:59.000Z

    A measurement has been made of the radiation damage incurred by the ATLAS Pixel Detector barrel silicon modules from the beginning of operations through the end of 2012. This translates to hadronic fluence received over the full period of operation at energies up to and including 8 TeV. The measurement is based on a per-module record of the silicon sensor leakage current. The results are presented as a function of integrated luminosity and compared to predictions by the Hamburg Model. This information can be used to predict limits on the lifetime of the Pixel Detector due to current, for various operating scenarios.

  9. Damage due to salt crystallization in porous media

    E-Print Network [OSTI]

    Noushine Shahidzadeh Bonn; Francois Bertrand; Daniel Bonn

    2009-06-13T23:59:59.000Z

    We investigate salt crystallization in porous media that can lead to their disintegration. For sodium sulfate we show for the first time experimentally that when anhydrous crystals are wetted with water, there is very rapid growth of the hydrated form of sulfate in clusters that nucleate on anhydrous salt micro crystals. The molar volume of the hydrated crystals being four times bigger, the growth of these clusters can generate stresses in excess of the tensile strength of the stone and lead therefore to damage.

  10. Optical Damage Threshold of Silicon for Ultrafast Infrared Pulses

    SciTech Connect (OSTI)

    Cowan, Benjamin M.; /Tech-X, Boulder /SLAC

    2007-11-28T23:59:59.000Z

    We present measurements of the optical damage threshold of crystalline silicon in air for ultrafast pulses in the near infrared. The wavelengths tested span a range from the telecommunications band at 1550 nm, extending to 2260 nm. We discuss the motivation for the measurements and give theoretical context. We then describe the experimental setup, diagnostics, and procedure. The results show a breakdown threshold of 0.2J/cm{sup 2} at 1550 nm and 1.06 ps FWHM pulse duration, and a weak dependence on wavelength.

  11. Quick-setting concrete and a method for making quick-setting concrete

    DOE Patents [OSTI]

    Wagh, Arun S. (Joliet, IL); Singh, Dileep (Westmont, IL); Pullockaran, Jose D. (Trenton, NJ); Knox, Lerry (Glen Ellyn, IL)

    1997-01-01T23:59:59.000Z

    A method for producing quick setting concrete is provided comprising hydrng a concrete dry mixture with carbonate solution to create a slurry, and allowing the slurry to cure. The invention also provides for a quick setting concrete having a predetermined proportion of CaCO.sub.3 of between 5 and 23 weight percent of the entire concrete mixture, and whereby the concrete has a compression strength of approximately 4,000 pounds per square inch (psi) within 24 hours after pouring.

  12. Widget:SetTitle | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTri GlobalJumpGoogleAreaMap JumpNOTITLE JumpRestrictedIFrame JumpSetTitle

  13. Core File Settings | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power Administration would likeConstitution AndControllingCool MagneticCoos BayCore File Settings

  14. Shelah Classication and Higher Descriptive Set Theory Shelah's Classication Theory

    E-Print Network [OSTI]

    -Rautila whenever + = , SDF when + : Theorem (Sam Coskey and SDF, independently) You can force 1 1 sets to have the BP. Perfect Set Property

  15. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Record-Setting Microscopy Illuminates Energy Storage Materials Print Thursday, 22 January 2015 12:10 X-ray microscopy...

  16. About [q]-regularity Properties of Collections of Sets

    E-Print Network [OSTI]

    2014-02-18T23:59:59.000Z

    collections of sets systematically, several other kinds of regularity were ... of the approximate stationarity property of collections of sets which is the main ...

  17. Energy Department Sets Tougher Standards for Clothes Washers...

    Office of Environmental Management (EM)

    Sets Tougher Standards for Clothes Washers to Qualify for the ENERGY STAR Label Energy Department Sets Tougher Standards for Clothes Washers to Qualify for the ENERGY STAR...

  18. Ready, Set . . . Get Prepped for Monday's Launch of the 'America...

    Energy Savers [EERE]

    Ready, Set . . . Get Prepped for Monday's Launch of the 'America's Next Top Energy Innovator' Challenge Ready, Set . . . Get Prepped for Monday's Launch of the 'America's Next Top...

  19. Comprehensive Energy Program at Patrick Air Force Base Set to...

    Broader source: Energy.gov (indexed) [DOE]

    Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy Goals Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy Goals Fact sheet...

  20. Observed physical processes in mechanical tests of PBX9501 and recomendations for experiments to explore a possible plasticity/damage threshold

    SciTech Connect (OSTI)

    Buechler, Miles A. [Los Alamos National Laboratory

    2012-05-02T23:59:59.000Z

    This memo discusses observations that have been made in regards to a series of monotonic and cyclic uniaxial experiments performed on PBX9501 by Darla Thompson under Enhanced Surveilance Campaign support. These observations discussed in Section Cyclic compression observations strongly suggest the presence of viscoelastic, plastic, and damage phenomena in the mechanical response of the material. In Secton Uniaxial data analysis and observations methods are discussed for separating out the viscoelastic effects. A crude application of those methods suggests the possibility of a critical stress below which plasticity and damage may be negligible. The threshold should be explored because if it exists it will be an important feature of any constitutive model. Additionally, if the threshold exists then modifications of experimental methods may be feasible which could potentially simplify future experiments or provide higher quality data from those experiments. A set of experiments to explore the threshold stress are proposed in Section Exploratory tests program for identifying threshold stress.

  1. Damage thresholds of fluoride multilayers at 355 nm

    SciTech Connect (OSTI)

    Chow, R.; Kozlowski, M.R.; Loomis, G.E.; Rainer, F.

    1992-10-01T23:59:59.000Z

    Fluoride multilayer coatings were evaluated for use in 355 nm high reflector applications. The LaF[sub 3]/Na[sub 3]AlF[sub 6], NdF[sub 3]/Na[sub 3]AlF[sub 6] and GdF[sub 3]/Na[sub 3]AlF[sub 6] multilayers had laser damage thresholds of 20, 17.9 and 7.4 (measured at 10-ns pulsewidths), respectively. High tensile stresses in the coatings restricted this evaluation to only 5-layer-pair partial reflectors (49--52%).The LaF[sub 3]/Na[sub 3]AlF[sub 6], NdF[sub 3]/Na[sub 3]Al[sub 6] and GdF[sub 3]/Na[sub 3]AlF[sub 6] multilayers had tensile stresses of [approximately] 1.1 [times] 109, 1.3 [times] 109 and 9.3 [times] 10[sup 8] dynes/cm[sup 2], respectively. Substrate material and glow-discharge processing of the substrates were found to influence the density of stress-induced coating fractures and damage thresholds in some cases. If stress fracturing and scatter can be controlled, these fluoride material combinations are suited for 3[omega] applications.

  2. Damage mechanisms in the dynamic fracture of nominally brittle polymers

    E-Print Network [OSTI]

    Davy Dalmas; Claudia Guerra; Julien Scheibert; Daniel Bonamy

    2013-04-23T23:59:59.000Z

    Linear Elastic Fracture Mechanics (LEFM) provides a consistent framework to evaluate quantitatively the energy flux released to the tip of a growing crack. Still, the way in which the crack selects its velocity in response to this energy flux remains far from completely understood. To uncover the underlying mechanisms, we experimentally studied damage and dissipation processes that develop during the dynamic failure of polymethylmethacrylate (PMMA), classically considered as the archetype of brittle amorphous materials. We evidenced a well-defined critical velocity along which failure switches from nominally-brittle to quasi-brittle, where crack propagation goes hand in hand with the nucleation and growth of microcracks. Via post-mortem analysis of the fracture surfaces, we were able to reconstruct the complete spatiotemporal microcracking dynamics with micrometer/nanosecond resolution. We demonstrated that the true local propagation speed of individual crack fronts is limited to a fairly low value, which can be much smaller than the apparent speed measured at the continuum-level scale. By coalescing with the main front, microcracks boost the macroscale velocity through an acceleration factor of geometrical origin. We discuss the key role of damage-related internal variables in the selection of macroscale fracture dynamics.

  3. The Role of Nickel in Radiation Damage of Ferritic Alloys.

    SciTech Connect (OSTI)

    Osetskiy, Yury N [ORNL; Anento, Napoleon [Universitat Politechnica de Catalunia; Serra, Anna [Universitat Politecnica de Catalunya; Terentyev, Dmitry [Belgian Nuclear Research Centre, SCK-CEN

    2015-01-01T23:59:59.000Z

    According to the modern theory damage evolution under neutron irradiation depends on the fraction of self interstitial atoms (SIAs) produced in the form of one-dimensionally (1-D) glissile clusters. These clusters, having a low interaction cross-section with other defects, sink mainly on grain boundaries and dislocations creating the so-called production bias. It is known empirically that addition of certain alloying elements affect many radiation effects, including swelling, however the mechanisms are unknown in many cases. In this paper we report the results of an extensive multi-technique atomistic level modeling of SIA clusters mobility in bcc Fe-Ni alloys with Ni content from 0.8 to 10 at.%. We have found that Ni interacts strongly with periphery of clusters affecting their mobility. The total effect is defined by all Ni atoms interacting with the cluster at the same time and can be significant even in low-Ni alloys. Thus 1nm (37SIAs) cluster is practically immobile at T<500K in the Fe-0.8at.% Ni alloy. Increasing cluster size and Ni content enhance cluster immobilization. This effect should have quite broad consequences in swelling rate, matrix damage accumulation, radiation induced hardening, etc. and the results obtained help in better understanding and prediction of radiation effects in Fe-Ni ferritic alloys.

  4. Evaluation and remediation of a fire damaged geosynthetic liner system

    SciTech Connect (OSTI)

    Adams, F.T.; Overmann, L.K.; Cotton, R.L.

    1997-11-01T23:59:59.000Z

    A fire in a hazardous waste landfill damaged the liner system consisting of compacted clay, geomembranes, geonets, geotextiles, and granular soils. Following waste excavation, the visibly damaged liner system materials were removed and samples of each component were obtained from the perimeter of the visibly undamaged area. Geomembrane samples were tested for tensile characteristics and index properties; geonet samples were tested for grab tensile properties and thickness. Test results were compared to the original specifications, manufacturers` quality control data, quality assurance conformance test results, and baseline sample data from an unaffected part of the landfill. Geomembrane baseline results exceeded the original specifications, and the specifications were used as the basis of acceptance of the perimeter samples. Geonet baseline results were inconclusive, with grab elongation consistently below the original specifications. A statistical approach was used to delineate the limit of affected geonet using the baseline sample data. The liner system was reconstructed to the limits defined by this testing program and returned to service following acceptance by the regulatory agencies.

  5. Emulation of reactor irradiation damage using ion beams

    SciTech Connect (OSTI)

    G. S. Was; Z. Jiao; E. Beckett; A. M. Monterrosa; O. Anderoglu; B. H. Sencer; M. Hackett

    2014-10-01T23:59:59.000Z

    The continued operation of existing light water nuclear reactors and the development of advanced nuclear reactor depend heavily on understanding how damage by radiation to levels degrades materials that serve as the structural components in reactor cores. The first high dose ion irradiation experiments on a ferritic-martensitic steel showing that ion irradiation closely emulates the full radiation damage microstructure created in-reactor are described. Ferritic-martensitic alloy HT9 (heat 84425) in the form of a hexagonal fuel bundle duct (ACO-3) accumulated 155 dpa at an average temperature of 443°C in the Fast Flux Test Facility (FFTF). Using invariance theory as a guide, irradiation of the same heat was conducted using self-ions (Fe++) at 5 MeV at a temperature of 460°C and to a dose of 188 displacements per atom. The void swelling was nearly identical between the two irradiations and the size and density of precipitates and loops following ion irradiation are within a factor of two of those for neutron irradiation. The level of agreement across all of the principal microstructure changes between ion and reactor irradiations establishes the capability of tailoring ion irradiations to emulate the reactor-irradiated microstructure.

  6. Setting clear expectations for safety basis development

    SciTech Connect (OSTI)

    MORENO, M.R.

    2003-05-03T23:59:59.000Z

    DOE-RL has set clear expectations for a cost-effective approach for achieving compliance with the Nuclear Safety Management requirements (10 CFR 830, Nuclear Safety Rule) which will ensure long-term benefit to Hanford. To facilitate implementation of these expectations, tools were developed to streamline and standardize safety analysis and safety document development resulting in a shorter and more predictable DOE approval cycle. A Hanford Safety Analysis and Risk Assessment Handbook (SARAH) was issued to standardized methodologies for development of safety analyses. A Microsoft Excel spreadsheet (RADIDOSE) was issued for the evaluation of radiological consequences for accident scenarios often postulated for Hanford. A standard Site Documented Safety Analysis (DSA) detailing the safety management programs was issued for use as a means of compliance with a majority of 3009 Standard chapters. An in-process review was developed between DOE and the Contractor to facilitate DOE approval and provide early course correction. As a result of setting expectations and providing safety analysis tools, the four Hanford Site waste management nuclear facilities were able to integrate into one Master Waste Management Documented Safety Analysis (WM-DSA).

  7. Logic and the set theory Lecture 11,12: Quantifiers (The set theory) in How to Prove It.

    E-Print Network [OSTI]

    Choi, Suhyoung

    and set theory October 2, 2011 1 / 1 #12;Introduction About this lecture Sets (HTP Sections 1.3, 1.4) S. Choi (KAIST) Logic and set theory October 2, 2011 2 / 1 #12;Introduction About this lecture Sets (HTP Sections 1.3, 1.4) Quantifiers and sets (HTP 2.1) S. Choi (KAIST) Logic and set theory October 2, 2011 2

  8. Logic and the set theory Lecture 11,12: Quantifiers (The set theory) in How to Prove It.

    E-Print Network [OSTI]

    Choi, Suhyoung

    and set theory October 7, 2012 1 / 26 #12;Introduction About this lecture Sets (HTP Sections 1.3, 1.4) S. Choi (KAIST) Logic and set theory October 7, 2012 2 / 26 #12;Introduction About this lecture Sets (HTP Sections 1.3, 1.4) Quantifiers and sets (HTP 2.1) S. Choi (KAIST) Logic and set theory October 7, 2012 2

  9. Damage monitoring in sandwich beams by modal parameter shifts: A comparative study of burst random and sine dwell

    E-Print Network [OSTI]

    Mailhes, Corinne

    1 Damage monitoring in sandwich beams by modal parameter shifts: A comparative study of burst Abstract: This paper presents an experimental study on the effects of multi-site damage on the vibration response of honeycomb sandwich beams, damaged by two different ways i.e., impact damage and core

  10. TIGHT FRAMES AND GEOMETRIC PROPERTIES OF WAVELET SETS

    E-Print Network [OSTI]

    Benedetto, John J.

    TIGHT FRAMES AND GEOMETRIC PROPERTIES OF WAVELET SETS John J. Benedetto and Songkiat Sumetkijakan # January 29, 2004 1 Introduction 1.1 Background and wavelet sets b R d is Euclidean space, R d , considered of a measurable set K # b R d of finite measure. K # b R d is a wavelet set if the function # # Ÿ 1K is a single

  11. Agents, Beliefs, and Plausible Behavior in a Temporal Setting

    E-Print Network [OSTI]

    Zachmann, Gabriel

    Zachmann (Computer Graphics) #12;Agents, Beliefs, and Plausible Behavior in a Temporal Setting Nils Bulling

  12. Contagious Sets in Expanders Amin Coja-Oghlan1

    E-Print Network [OSTI]

    Krivelevich, Michael

    Contagious Sets in Expanders Amin Coja-Oghlan1 , Uriel Feige2 , Michael Krivelevich3 , and Daniel, where r > 1 is the activation threshold. A contagious set is a set whose activation results with the entire graph being active. Given a graph G, let m(G, r) be the minimal size of a contagious set

  13. Contagious Sets in Expanders Amin Coja-Oghlan

    E-Print Network [OSTI]

    Krivelevich, Michael

    Contagious Sets in Expanders Amin Coja-Oghlan Uriel Feige Michael Krivelevich Daniel Reichman§ June physics and viral marketing. A contagious set is a set whose activation results with the entire graph being active. Given a graph G, let m(G, r) be the minimal size of a contagious set. Computing m(G, r

  14. Irrigation of Liquid Manures with Solid Set Systems

    E-Print Network [OSTI]

    Kaye, Jason P.

    Irrigation of Liquid Manures with Solid Set Systems Albert R. Jarrett, Professor, Agricultural Extension Solid Set Irrigation System Solid set irrigation is a system of irrigation sprinklers and piping moved from one location to another). Solid set irrigation systems are rarely used to apply liquid manure

  15. Secret Sets and Applications R. Molva \\Lambda G. Tsudik y

    E-Print Network [OSTI]

    Tsudik, Gene

    Secret Sets and Applications R. Molva \\Lambda G. Tsudik y August 14, 1997 Abstract This paper introduces the notion of a secret set -- a basic construct for communication with groups of mutually suspicious entities. A set is secret if any entity can test its membership in the set but can determine

  16. Automata for arithmetic Meyer sets Shigeki Akiyama1

    E-Print Network [OSTI]

    Boyer, Edmond

    Automata for arithmetic Meyer sets Shigeki Akiyama1 , Fr´ed´erique Bassino2 , and Christiane, Christiane.Frougny@liafa.jussieu.fr Abstract. The set Z of -integers is a Meyer set when is a Pisot number of the elements of Z - Z as a sum belonging to Z + F. 1 Introduction The so-called Meyer sets have been introduced

  17. Set theory and physics Institut fur Theoretische Physik

    E-Print Network [OSTI]

    Svozil, Karl

    theory in general. In Cantorian (i.e., non-axiomatic) set theory, the "definition" of the con- ceptSet theory and physics K. Svozil Institut f¨ur Theoretische Physik University of Technology Vienna://tph.tuwien.ac.at/ svozil 1995-set.tex 1 #12;Abstract In as much as physical theories are formalizable, set theory pro

  18. CFD Analyses of Damaged Fuel Inside a Cleaning Vessel

    SciTech Connect (OSTI)

    Legradi, Gabor; Boros, Ildiko; Aszodi, Attila [Budapest University of Technology and Economics, Muegyetem rkp. 3-9. H-1111 Budapest (Hungary)

    2006-07-01T23:59:59.000Z

    On 10-11 of April, 2003, a serious incident occurred in a special fuel assembly cleaning tank, which was installed into the service shaft of the 2. unit of the Paks NPP in Hungary. During this incident, most of the 30 fuel assemblies put into the cleaning tank have seriously damaged. In the Institute of Nuclear Techniques of the Budapest University of Technology and Economics several CFD investigations were performed concerning the course of the incident, the post incidental conditions and the recovery work. The main reason of the incident can be originated from the defective design of the cleaning tank which resulted in the insufficient cooling of the system in a special operational mode. Our investigation performed with a complex 3D CFX model clearly showed how could as strong temperature stratification develop inside the cleaning tank that it was able to block the coolant flow through the fuel assemblies. After the blocking of the flow, the coolant turned into boiling and the assemblies became uncovered. The temperature of the surfaces of the fuel assemblies went above 1000 deg. C. With the aid of the radiative heat transfer model of the CFX-5.6 code, the surface temperatures were analyzed. When the cleaning instrument got opened the fuel assemblies suffered a serious thermal shock and the assemblies highly damaged. The post-incident thermo-hydraulic state inside the cleaning vessel was investigated with a rather complex CFX model. The uncertainties were decreased by a wide parameter study. The recovery work is planned to be started in the close future. The operators of the damaged fuel removing equipments will work standing on a platform which will be placed into the service shaft just above the surface of the coolant of decreased level. Protecting the workers against unnecessary personal doses is a very important task. In this situation, while the coolant is important part of the biological shielding, it is also a source of radiation due to the considerable amount of radioactive contamination dispersed into it. Therefore, the 3D distribution of the contamination in the service shaft was estimated for different operational and incidental scenarios with a wide parameter study made by a 3D CFX model. This comprehensive work performed with several models and calculations is tersely outlined according to the limited extent of the paper. (authors)

  19. Unexpected irreversible damage of an asymmetric bismuth silicate photorefractive spatial light modulator

    SciTech Connect (OSTI)

    Li Xiujian; Yang Jiankun; Yang Juncai; Chang Shengli; Liu Ju; Hu Wenhua

    2007-06-20T23:59:59.000Z

    Unexpected irreversible damage occurred repeatedly in the asymmetric bismuth silicate (BSO)photorefractive spatial light modulator under some operation modes, even though thepower of the write-light beam does not exceed the optical damage threshold. Accordingto the microscopic surface images and the Raman spectra of the BSO film, suddenrising of temperature in local areas caused by the drift of the photon-induced electronsis responsible for the damage; the damage exists not only on the surface but also insidethe BSO crystal. The damage is relative to the structure of the spatial lightmodulator, the operation mode, and the growth of the BSO crystal. The informationprovided by the damage is useful for optimizing the structure, the operation modes, and the performance of the photorefractive spatial light modulators.

  20. Quick-setting concrete and a method for making quick-setting concrete

    DOE Patents [OSTI]

    Wagh, A.S.; Singh, D.; Pullockaran, J.D.; Knox, L.

    1997-04-29T23:59:59.000Z

    A method for producing quick setting concrete is provided comprising mixing a concrete dry mixture with carbonate solution to create a slurry, and allowing the slurry to cure. The invention also provides for a quick setting concrete having a predetermined proportion of CaCO{sub 3} of between 5 and 23 weight percent of the entire concrete mixture, and whereby the concrete has a compression strength of approximately 4,000 pounds per square inch (psi) within 24 hours after pouring. 2 figs.

  1. Defect and damage evolution quantification in dynamically-deformed metals using orientation-imaging microscopy

    SciTech Connect (OSTI)

    Gray, George T., III [Los Alamos National Laboratory; Livescu, Veronica [Los Alamos National Laboratory; Cerreta, Ellen K [Los Alamos National Laboratory

    2010-03-18T23:59:59.000Z

    Orientation-imaging microscopy offers unique capabilities to quantify the defects and damage evolution occurring in metals following dynamic and shock loading. Examples of the quantification of the types of deformation twins activated, volume fraction of twinning, and damage evolution as a function of shock loading in Ta are presented. Electron back-scatter diffraction (EBSD) examination of the damage evolution in sweeping-detonation-wave shock loading to study spallation in Cu is also presented.

  2. Clean Assembly Practices to Prevent Contamination and Damage to Optics

    SciTech Connect (OSTI)

    Pryatel, J; Gourdin, W H

    2005-12-19T23:59:59.000Z

    A key lesson learned from the earliest optics installed in the National Ignition Facility (NIF) was that the traditional approach for maintaining cleanliness, such as the use of cleanrooms and associated garments and protocols, is inadequate. Assembly activities often negate the benefits provided by cleanrooms, and in fact generate contamination with high damage potential. As a result, NIF introduced ''clean assembly protocols'' and related practices to supplement the traditional clean room protocols. These new protocols included ''clean-as-you-go'' activities and regular bright light inspections. Introduction of these new protocols has greatly reduced the particle contamination found on more recently installed optics. In this paper we will describe the contamination mechanisms we have observed and the details of the clean assembly protocols we have successfully introduced to mitigate them.

  3. Compensation for TID Damage in SOI Pixel Devices

    E-Print Network [OSTI]

    Tobita, Naoshi; Hara, Kazuhiko; Aoyagi, Wataru; Arai, Yasuo; Miyoshi, Toshinobu; Kurachi, Ikuo; Hatsui, Takaki; Kudo, Togo; Kobayashi, Kazuo

    2015-01-01T23:59:59.000Z

    We are investigating adaption of SOI pixel devices for future high energy physic(HEP) experiments. The pixel sensors are required to be operational in very severe radiation environment. Most challenging issue in the adoption is the TID (total ionizing dose) damage where holes trapped in oxide layers affect the operation of nearby transistors. We have introduced a second SOI layer - SOI2 beneath the BOX (Buried OXide) layer - in order to compensate for the TID effect by applying a negative voltage to this electrode to cancel the effect caused by accumulated positive holes. In this paper, the TID effects caused by Co gamma-ray irradiation are presented based on the transistor characteristics measurements. The irradiation was carried out in various biasing conditions to investigate hole accumulation dependence on the potential configurations. We also compare the data with samples irradiated with X-ray. Since we observed a fair agreement between the two irradiation datasets, the TID effects have been investigated...

  4. Longitudinal information and radiation damage in EM calorimetry

    SciTech Connect (OSTI)

    Green, D.

    1993-02-05T23:59:59.000Z

    The SCC radiation field is higher than that encountered by previous hadron collider detectors. In particular, the electromagnetic (EM) calorimeter compartment sees the highest radiation dose. Since an EM calorimeter also makes the most precise energy measurement, special care must be lavished on this part of a calorimeter. Previous studies have concentrated on Monte Carlo examinations of 2 longitudinal compartments within the EM which can alleviate radiation damage. Recently, it was realized that a ``shower maximum`` detector, such as exists in CDF, also contains information of the conversion point of an electromagnetic shower. As such, it can potentially be used in a fashion analogous to the longitudinal compartments, although it is not designed to be optimized for this role.

  5. LNG cascading damage study. Volume I, fracture testing report.

    SciTech Connect (OSTI)

    Petti, Jason P.; Kalan, Robert J.

    2011-12-01T23:59:59.000Z

    As part of the liquefied natural gas (LNG) Cascading Damage Study, a series of structural tests were conducted to investigate the thermal induced fracture of steel plate structures. The thermal stresses were achieved by applying liquid nitrogen (LN{sub 2}) onto sections of each steel plate. In addition to inducing large thermal stresses, the lowering of the steel temperature simultaneously reduced the fracture toughness. Liquid nitrogen was used as a surrogate for LNG due to safety concerns and since the temperature of LN{sub 2} is similar (-190 C) to LNG (-161 C). The use of LN{sub 2} ensured that the tests could achieve cryogenic temperatures in the range an actual vessel would encounter during a LNG spill. There were four phases to this test series. Phase I was the initial exploratory stage, which was used to develop the testing process. In the Phase II series of tests, larger plates were used and tested until fracture. The plate sizes ranged from 4 ft square pieces to 6 ft square sections with thicknesses from 1/4 inches to 3/4 inches. This phase investigated the cooling rates on larger plates and the effect of different notch geometries (stress concentrations used to initiate brittle fracture). Phase II was divided into two sections, Phase II-A and Phase II-B. Phase II-A used standard A36 steel, while Phase II-B used marine grade steels. In Phase III, the test structures were significantly larger, in the range of 12 ft by 12 ft by 3 ft high. These structures were designed with more complex geometries to include features similar to those on LNG vessels. The final test phase, Phase IV, investigated differences in the heat transfer (cooling rates) between LNG and LN{sub 2}. All of the tests conducted in this study are used in subsequent parts of the LNG Cascading Damage Study, specifically the computational analyses.

  6. SUBTHRESHOLD DISPLACEMENT DAMAGE IN COPPER-ALUMINUM ALLOYS DURING ELECTRON IRRADIATION

    E-Print Network [OSTI]

    Drosd, R.

    2010-01-01T23:59:59.000Z

    DAMAGE IN COPPER-ALUMINUM ALLOYS DURING ELECTRON IRRADIATIONDAMAGE IN COPPER-ALUMINUM ALLOYS DURING ELECTRON IRRADIATIONby irradiating copper-aluminum alloys at high tempera­ tures

  7. E-Print Network 3.0 - acute axonal damage Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sections were viewed with a light microscope. Those axons labeled with HRP... that acrolein, a lipid peroxida- tion byproduct, can inflict significant damage in isolated spinal...

  8. Damage Profile and Ion Distribution of Slow Heavy Ions in Compounds...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Profile and Ion Distribution of Slow Heavy Ions in Compounds. Damage Profile and Ion Distribution of Slow Heavy Ions in Compounds. Abstract: Slow heavy ions inevitably produce a...

  9. Risk of damaging the wires by edges of laser drilled holes in the end plugs

    E-Print Network [OSTI]

    Staude, A; Trefzger, T M

    1998-01-01T23:59:59.000Z

    No sign of damage to the wire by edges of the laser drilled hole has been seen, based on a sample of four end plugs.

  10. atr-mediated dna damage: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    damage may not only reduce the number of amplifiable template molecules, but may also lead to the generation of erroneous sequence information. A qualitative and quantitative...

  11. aluminium-induced dna damage: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    damage may not only reduce the number of amplifiable template molecules, but may also lead to the generation of erroneous sequence information. A qualitative and quantitative...

  12. atr-dependent dna damage: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    damage may not only reduce the number of amplifiable template molecules, but may also lead to the generation of erroneous sequence information. A qualitative and quantitative...

  13. Mechanical Damage from Cavitation in High Intensity Focused Ultrasound Accelerated Thrombolysis

    E-Print Network [OSTI]

    Weiss, Hope

    2012-01-01T23:59:59.000Z

    3.3 Cavitation Model . . . . . . . . . . . . . . . . . . . .Field Characterization / Passive Cavitation Detection 2.3Method for Estimation of Cavitation Damage for an Embedded

  14. Laser induced damage of fused silica polished optics due to a droplet forming organic contaminant

    SciTech Connect (OSTI)

    Bien-Aime, Karell; Neauport, Jerome; Tovena-Pecault, Isabelle; Fargin, Evelyne; Labrugere, Christine; Belin, Colette; Couzi, Michel

    2009-04-20T23:59:59.000Z

    We report on the effect of organic molecular contamination on single shot laser induced damage density at the wavelength of 351 nm, with a 3 ns pulse length. Specific contamination experiments were made with dioctylphthalate (DOP) in liquid or gaseous phase, on the surface of fused silica polished samples, bare or solgel coated. Systematic laser induced damage was observed only in the case of liquid phase contamination. Different chemical and morphological characterization methods were used to identify and understand the damage process. We demonstrate that the contaminant morphology, rather than its physicochemical nature, can be responsible for the decrease of laser induced damage threshold of optics.

  15. Guidelines for Setting up a Reflux Condenser Water leaks from a reflux condenser can destroy years of research data and cause thousands of dollars of damage to

    E-Print Network [OSTI]

    Brody, James P.

    ), the joints are further secured with copper wires (16 ga.) by wrapping twice around the joints and tightening with pliers (b). Any leftover wires are cut (c). * The copper wirings around the joints (encircled in pictures if there are any items that may block the water flow. The picture, as an example, shows possible items that may

  16. Noether theorems in a general setting

    E-Print Network [OSTI]

    G. Sardanashvily

    2014-11-11T23:59:59.000Z

    The first and second Noether theorems are formulated in a general case of reducible degenerate Grassmann-graded Lagrangian theory of even and odd variables on graded bundles. Such Lagrangian theory is characterized by a hierarchy of non-trivial higher-stage Noether identities and the corresponding higher-stage gauge symmetries which are described in the homology terms. In these terms, the second Noether theorems associate to the Koszul - Tate chain complex of higher-stage Noether identities the gauge cochain sequence whose ascent operator provides higher-order gauge symmetries of Lagrangian theory. If gauge symmetries are algebraically closed, this operator is extended to the nilpotent BRST operator which brings the gauge cochain sequence into the BRST complex. In this framework, the first Noether theorem is formulated as a straightforward corollary of the first variational formula. It associates to any variational Lagrangian symmetry the conserved current whose total differential vanishes on-shell. We prove in a general setting that a conserved current of a gauge symmetry is reduced to a total differential on-shell. The physically relevant examples of gauge theory on principal bundles, gauge gravitational theory on natural bundles, topological Chern - Simons field theory and topological BF theory are present. The last one exemplifies a reducible Lagrangian system.

  17. Gravitational lens modeling with basis sets

    E-Print Network [OSTI]

    Birrer, Simon; Refregier, Alexandre

    2015-01-01T23:59:59.000Z

    We present a strong lensing modeling technique based on versatile basis sets for the lens and source planes. Our method uses high performance Monte Carlo algorithms, allows for an adaptive build up of complexity and bridges the gap between parametric and pixel based reconstruction methods. We apply our method to a HST image of the strong lens system RXJ1131-1231 and show that our method finds a reliable solution and is able to detect substructure in the lens and source planes simultaneously. Using mock data we show that our method is sensitive to sub-clumps with masses four orders of magnitude smaller than the main lens, which corresponds to about $10^8 M_{\\odot}$, without prior knowledge on the position and mass of the sub-clump. The modelling approach is flexible and maximises automation to facilitate the analysis of the large number of strong lensing systems expected in upcoming wide field surveys. The resulting search for dark sub-clumps in these systems, without mass-to-light priors, offers promise for p...

  18. On the Bragg Diffraction Spectra of a Meyer Set

    E-Print Network [OSTI]

    Nicolae Strungaru

    2013-05-16T23:59:59.000Z

    Meyer sets have a relatively dense set of Bragg peaks and for this reason they may be considered as basic mathematical examples of (aperiodic) crystals. In this paper we investigate the pure point part of the diffraction of Meyer sets in more detail. The results are of two kinds. First we show that given a Meyer set and any intensity a less than the maximum intensity of its Bragg peaks, the set of Bragg peaks whose intensity exceeds a is itself a Meyer set (in the Fourier space). Second we show that if a Meyer set is modified by addition and removal of points in such a way that its density is not altered too much (the allowable amount being given explicitly as a proportion of the original density) then the newly obtained set still has a relatively dense set of Bragg peaks.

  19. Geologic Assessment of the Damage Zone from the Second Test at Source Physics Experiment-Nevada (SPE-N)

    SciTech Connect (OSTI)

    ,

    2012-09-18T23:59:59.000Z

    The National Center for Nuclear Security (NCNS), established by the U.S. Department of Energy, National Nuclear Security Administration, is conducting a series of explosive tests at the Nevada National Security Site (NNSS; formerly the Nevada Test Site) that are designed to increase the understanding of certain basic physical phenomena associated with underground explosions. These tests will aid in developing technologies that might be used to detect underground nuclear explosions in support of verification activities for the Comprehensive Nuclear-Test-Ban Treaty (CTBT). The initial NCNS project is a series of explosive tests, known collectively as the Source Physics Experiment at the NNSS (SPE-N), being conducted in granitic rocks at the Climax stock in northern Yucca Flat. The SPE-N test series is designed to study the generation and propagation of seismic waves. The data will be used to improve the predictive capability of calculational models for detecting and characterizing underground explosions. The first SPE-N test (SPE-N-1) was a “calibration” shot conducted in May 2011, using 100 kilograms (kg) of explosives at the depth of 54.9 meters (m) (180 feet [ft]) in the U-15n source hole. SPE-N-2 was conducted in October 2011, using 1,000 kg of explosives at the depth of 45.7 m (150 ft) in the same source hole. Following the SPE-N-2 test, the core hole U-15n#10 was drilled at an angle from the surface to intercept the SPE-N-2 shot point location to obtain information necessary to characterize the damage zone. The desire was to determine the position of the damage zone near the shot point, at least on the northeast side, where the core hole penetrated it. The three-dimensional shape and symmetry of the damage zone are unknown at this time. Rather than spherical in shape, the dimensions of the damage zone could be influenced by the natural fracture sets in the vicinity. Geologic characterization of the borehole included geophysical logging, a directional survey, and geologic description of the core to document visual evidence of damage. Selected core samples were provided to Sandia National Laboratories (SNL) for laboratory tests (to be reported by SNL). A significant natural fault zone was encountered in the U-15n#10 angle core hole between the drilled depths of 149 and 155 ft (straight-line distance or range station [RS] from the shot point of 7.5 to 5.7 m). However, several of the fractures observed in the U-15n#10 hole are interpreted as having been caused by the explosion. These fractures are characterized by a “fresh,” mechanically broken look, with uncoated and very irregular surfaces. They tend to terminate against natural fractures and have orientations that differ from the previously defined natural fracture sets. The most distant fracture from the shot point that could be interpreted as having been caused by the explosion was seen at approximately RS 10.0 m. No other possibly explosion-induced fractures are apparent above the fault, but are common starting at RS 5.4 m, which is below the fault. It is unknown how the fault zone might have affected the propagation of seismic waves or how the materials in the fault zone (altered granite, breccia, gouge) were affected by the explosion. From RS 3.3 m to the end of the recovered core at RS 1.6 m, some of the core samples are softer and lighter in color, but do not appear to be weathered. It is thought this could be indicative of the presence of distributed microfracturing.

  20. Geologic Assessment of the Damage Zone from the Second Test at Source Physics Experiment-Nevada (SPE-N)

    SciTech Connect (OSTI)

    Townsend, M. J.; Huckins-Gang, H. E.; Prothro, L. B.; Reed, D. N.

    2012-12-01T23:59:59.000Z

    The National Center for Nuclear Security, established by the U.S. Department of Energy, National Nuclear Security Administration (NNSA), is conducting a series of explosive tests at the Nevada National Security Site that are designed to increase the understanding of certain basic physical phenomena associated with underground explosions. These tests will aid in developing technologies that might be used to detect underground nuclear explosions in support of verification activities for the Comprehensive Nuclear-Test-Ban Treaty. The initial project is a series of explosive tests, known collectively as the Source Physics Experiment-Nevada (SPE-N), being conducted in granitic rocks. The SPE-N test series is designed to study the generation and propagation of seismic waves. The results will help advance the seismic monitoring capability of the United States by improving the predictive capability of physics-based modeling of explosive phenomena. The first SPE N (SPE-N-1) test was conducted in May 2011, using 100 kg of explosives at the depth of 54.9 m in the U 15n source hole. SPE-N-2 was conducted in October 2011, using 1,000 kg of explosives at the depth of 45.7 m in the same source hole. The SPE-N-3 test was conducted in the same source hole in July 2012, using the same amount and type of explosive as for SPE-N-2, and at the same depth as SPE-N-2, within the damage zone created by the SPE-N-2 explosion to investigate damage effects on seismic wave propagation. Following the SPE-N-2 shot and prior to the SPE-N-3 shot, the core hole U-15n#10 was drilled at an angle from the surface to intercept the SPE-N-2 shot point location to obtain information necessary to characterize the damage zone. The objective was to determine the position of the damage zone near the shot point, at least on the northeast, where the core hole penetrated it, and obtain information on the properties of the damaged medium. Geologic characterization of the post-SPE-N-2 core hole included geophysical logging, a directional survey, and geologic description of the core to document visual evidence of damage. Selected core samples were provided to Sandia National Laboratories (SNL) for measurement of physical and mechanical properties. A video was also run in the source hole after it was cleaned out. A significant natural fault zone was encountered in the angle core hole between 5.7 and 7.5 m from the shot point. However, several of the fractures observed in the core hole are interpreted as having been caused by the explosion. The fractures are characterized by a “fresh,” mechanically broken look, with uncoated and very irregular surfaces. They tend to terminate against natural fractures and have orientations that differ from the previously defined natural fracture sets; they are common starting at about 5.4 m from the shot point. Within about 3.3 m of the shot point to the end of the recovered core at 1.6 m from the shot point, some of the core samples are softer and lighter in color, but do not appear to be weathered. It is thought this could be indicative of the presence of distributed microfracturing.

  1. WILD PIGS: BIOLOGY, DAMAGE, CONTROL TECHINQUES AND MANAGEMENT

    SciTech Connect (OSTI)

    Mayer, John; Brisbin, I. Lehr

    2009-12-31T23:59:59.000Z

    The existence of problems with wild pigs (Sus scrofa) is nothing new to the Western Hemisphere. Damage by these introduced animals was reported as far back as 1505 by the early Spanish colonies in the Caribbean, where wild pigs were killing the colonists cattle. Droves of these animals also ravaged cultivated crops of maize and sugarcane on islands in the West Indies during this same time period. These wild pigs reportedly were very aggressive and often attacked Spanish soldiers hunting rebellious Indians or escaped slaves on these islands, especially when these animals were cornered. The documentation of such impacts by introduced populations of this species in the United States has subsequently increased in recent years, and continued up through the present (Towne and Wentworth. 1950, Wood and Barrett 1979, Mayer and Brisbin 1991, Dickson et al. 2001). In spite of a fairly constant history in this country since the early 1900s, wild pigs have had a dramatic recent increase in both distribution and numbers in the United States. Between 1989 and 2009, the number of states reporting the presence of introduced wild pigs went from 19 up to as many as 44. This increase, in part natural, but largely manmade, has caused an increased workload and cost for land and resource managers in areas where these new populations are found. This is the direct result of the damage that these introduced animals do. The cost of both these impacts and control efforts has been estimated to exceed a billion dollars annually (Pimentel 2007). The complexity of this problem has been further complicated by the widespread appeal and economic potential of these animals as a big game species (Tisdell 1982, Degner 1989). Wild pigs are a controversial problem that is not going away and will likely only get worse with time. Not only do they cause damage, but wild pigs are also survivors. They reproduce at a rate faster than any other mammal of comparable size, native or introduced; they can eat just about anything; and, they can live just about anywhere. On top of that, wild pigs are both very difficult to control and, with the possible exception of island ecosystems, almost impossible to eradicate (Dickson et al. 2001, Sweeney et al. 2003). The solution to the wild pig problem has not been readily apparent. The ultimate answer as to how to control these animals has not been found to date. In many ways, wild pigs are America's most successful large invasive species. All of which means that wild pigs are a veritable nightmare for land and resource managers trying to keep the numbers of these animals and the damage that they do under control. Since the more that one knows about an invasive species, the easier it is to deal with and hopefully control. For wild pigs then, it is better to 'know thy enemy' than to not, especially if one expects to be able to successfully control them. In an effort to better 'know thy enemy,' a two-day symposium was held in Augusta, Georgia, on April 21-22, 2004. This symposium was organized and sponsored by U.S.D.A. Forest Service-Savannah River (USFS-SR), U. S. Department of Energy-Savannah River Operations Office (DOE-SR), the Westinghouse Savannah River Company (WSRC), the South Carolina Chapter of the Soil & Water Conservation Society, and the Savannah River Ecology Laboratory (SREL). The goal of this symposium was to assemble researchers and land managers to first address various aspects of the biology and damage of wild pigs, and then review the control techniques and management of this invasive species. The result would then be a collected synopsis of what is known about wild pigs in the United States. Although the focus of the symposium was primarily directed toward federal agencies, presenters also included professionals from academic institutions, and private-sector control contractors and land managers. Most of the organizations associated with implementing this symposium were affiliated with the Savannah River Site (SRS), a 803 km{sup 2} federal nuclear facility, located in western South Carolina along the Savannah

  2. Debris and Radiation-Induced Damage Effects on EUV Nanolithography Source Collector Mirror Optics Performance

    E-Print Network [OSTI]

    Harilal, S. S.

    Debris and Radiation-Induced Damage Effects on EUV Nanolithography Source Collector Mirror Optics, Argonne, Illinois ABSTRACT Exposure of collector mirrors facing the hot, dense pinch plasma in plasma region of the lamp are known to induce serious damage to nearby collector mirrors. Candidate collector

  3. RESULTS FROM CAVITATION DAMAGE EXPERIMENTS WITH MERCURY SPALLATION TARGETS AT THE LANSCE WNR IN 2008

    SciTech Connect (OSTI)

    Riemer, Bernie [ORNL] [ORNL; Abdou, Ashraf A [ORNL] [ORNL; Felde, David K [ORNL] [ORNL; Sangrey, Robert L [ORNL] [ORNL; Wendel, Mark W [ORNL] [ORNL

    2010-01-01T23:59:59.000Z

    Damage assessment from proton beam induced cavitation experiments on mercury spallation targets done at the LANSCE WNR facility has been completed. The experiments investigated two key questions for the Spallation Neutron Source target, namely, how damage is affected by flow velocity in the SNS coolant channel geometry, and how damage scales with proton beam intensity at a given constant charge per pulse. With regard to the former question, prior in-beam experiments indicated that the coolant channel geometry with stagnant mercury was especially vulnerable to damage which might warrant a design change. Yet other results indicated a reduction in damage with the introduction of flow. Using more prototypic to the SNS, the 2008 experiment damage results show the channel is less vulnerable than the bulk mercury side of the vessel wall. They also show no benefit from increasing channel flow velocity beyond nominal SNS speeds. The second question probed a consensus belief that damage scales with beam intensity (protons per unit area) by a power law dependence with exponent of around 4. Results from a 2005 experiment did not support this power law dependence but some observations were inconsistent and unexplained. These latest results show weaker damage dependence.

  4. Modeling of Damage in Cement-Based Materials Subjected to External Sulfate Attack. I: Formulation

    E-Print Network [OSTI]

    Mobasher, Barzin

    Modeling of Damage in Cement-Based Materials Subjected to External Sulfate Attack. I: Formulation subject headings: Damage; Models; Sulfates; Cements. Introduction A majority of the durability issues. Portland cement-based materials subjected to attack from external sulfates may suffer from two types of dam

  5. Soluble Epoxide Hydrolase Inhibition Protects the Kidney from Hypertension-Induced Damage

    E-Print Network [OSTI]

    Hammock, Bruce D.

    Soluble Epoxide Hydrolase Inhibition Protects the Kidney from Hypertension-Induced Damage XUEYING hypertension in- duced renal damage. Chronic administration of the specific SEH inhibitor 1-cyclohexyl-3-dodecylurea (CDU, 3 mg/d) for 10 d lowered BP in angiotensin hypertensive rats. The contri- bution of renal

  6. Windstorm damage and forest recovery: accelerated succession, stand structure, and spatial pattern

    E-Print Network [OSTI]

    Palmer, Michael W.

    ). Patterns of wind-induced damage and mortality may vary according to tree species, tree size, tree density). Given the potential variability of wind- related damage, differential tree mortality from a windstorm Ã? Springer Science+Business Media Dordrecht 2012 Abstract We evaluated 25 years of change in wind

  7. Damage Threats and Response of Final Optics for Laser-Fusion Power Plants

    E-Print Network [OSTI]

    Tillack, Mark

    Damage Threats and Response of Final Optics for Laser-Fusion Power Plants M. S. Tillack1 , S. A-1597 The final optics for laser-IFE (inertial fusion energy) power plants will be exposed to a variety of damage to be the most serious concerns for a power plant. 1. Introduction Survival of the final optic is one of the most

  8. NUMERICAL MODELING OF SHOCK-INDUCED DAMAGE FOR GRANITE UNDER DYNAMIC LOADING

    E-Print Network [OSTI]

    Stewart, Sarah T.

    NUMERICAL MODELING OF SHOCK-INDUCED DAMAGE FOR GRANITE UNDER DYNAMIC LOADING H. A. Ai1 , T. J beneath impact crater in granite. Model constants are determined either directly from static uniaxial from Century Dynamics to simulate the shock-induced damage in granite targets impacted by projectiles

  9. A Multiscale Framework for the Characterization of Damage in Textile Composites Under Thermomechanical Loads

    E-Print Network [OSTI]

    McLendon, Wesley R

    2013-11-08T23:59:59.000Z

    utilizes cohesive interface elements in the tows, neat matrix pockets, and tow and matrix interfaces to account for crack opening in the textile, as well as a continuum damage model to account for di?use damage in the tows. Variability and temperature...

  10. Glebov SSDLTR 2004 Laser Damage Resistance of Photo-Thermo-Refractive

    E-Print Network [OSTI]

    Glebov, Leon

    magnifying for agile beam scanning, selection of transverse and longitudinal modes in different laser inclusions. It was found in Ref. [7] that the surface laser damage threshold for PTR glass melted in a silicaGlebov SSDLTR 2004 Poster-4 Laser Damage Resistance of Photo-Thermo-Refractive Glass Bragg Gratings

  11. Original Contrbution Induction of oxidative and nitrosative damage leads to cerebrovascular

    E-Print Network [OSTI]

    Farritor, Shane

    Original Contrbution Induction of oxidative and nitrosative damage leads to cerebrovascular 2013 Available online 4 March 2013 Keywords: Mild traumatic brain injury Blood­brain barrier Oxidative the hypothesis that oxidative damage of the cerebral vascular barrier interface (the blood­brain barrier, BBB

  12. High-resolution velocity field imaging around a borehole: Excavation Damaged Zone characterization

    E-Print Network [OSTI]

    Boyer, Edmond

    .balland@ineris.fr, vincent.renaud@ineris.fr ABSTRACT The excavation of a deep underground structure induces a stress field of a material. In the case of underground storage, rock damage will affect the rock capacity to confine1 High-resolution velocity field imaging around a borehole: Excavation Damaged Zone

  13. A continuum damage modelling of quasi-static fatigue strength of plain concrete

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    A continuum damage modelling of quasi-static fatigue strength of plain concrete S. H. Maia,b , F of concrete. The approach is based on the framework of continuum damage mechanics where the fatigue model fatigue tests have been performed on a concrete the formulation of which is close to the one used

  14. A LARGE SCALE CONTINUUM-DISCRETE NUMERICAL MODELLING: APPLICATION TO OVERBURDEN DAMAGE OF A SALT CAVERN

    E-Print Network [OSTI]

    Boyer, Edmond

    A LARGE SCALE CONTINUUM-DISCRETE NUMERICAL MODELLING: APPLICATION TO OVERBURDEN DAMAGE OF A SALT damage on top of an underground solution mining, an in-situ experiment is undertaken above a salt cavity in the Lorraine region (NE of France). The overburden overlying the salt cavity is characterized by a competent

  15. 6 HumanWildlife Conflicts 1(1)Columns The changing face of wildlife damage management

    E-Print Network [OSTI]

    management methods has risen dramatically. Public scrutiny of these methods has also increased substantially, wildlife damage management professionals are also involved in activities to protect public health damage management. New problems and conflicts with wildlife require increasingly new and unique research

  16. DNA damage responses in the context of the cell division cycle

    E-Print Network [OSTI]

    Giunta, Simona

    2010-11-16T23:59:59.000Z

    During my PhD, I have investigated aspects of the DNA damage response (DDR) in the context of three different cellular scenarios: DNA damage signalling in response to double-strand breaks during mitosis, coordination of DNA replication with DNA...

  17. DNA Damage by Fasicularin Sanjay Dutta, Hideki Abe, Sakae Aoyagi, Chihiro Kibayashi, and Kent S. Gates*,

    E-Print Network [OSTI]

    Gates, Kent. S.

    DNA Damage by Fasicularin Sanjay Dutta, Hideki Abe, Sakae Aoyagi, Chihiro Kibayashi, and Kent S that a DNA repair- deficient cell line is hypersensitive to fasicularin suggest that an ability to damage DNA a putative aziridinium ion intermediate.2 Aziridinium ions are well-known DNA-alkylating species.3

  18. NEUTRON DAMAGE IN REACTOR PRESSURE-VESSEL STEEL EXAMINED WITH POSITRON ANNIHILATION LIFETIME SPECTROSCOPY

    E-Print Network [OSTI]

    Motta, Arthur T.

    NEUTRON DAMAGE IN REACTOR PRESSURE-VESSEL STEEL EXAMINED WITH POSITRON ANNIHILATION LIFETIME-vessel steels. We irradiated samples ofASTM A508 nuclear reactor pressure-vessel steel to fast neutron 17 2 (PALS) to study the effects of neutron damage in the steels on positron lifetimes. Non

  19. Prevention of tissue damage by water jet during cavitation Daniel Palanker,a)

    E-Print Network [OSTI]

    Palanker, Daniel

    Prevention of tissue damage by water jet during cavitation Daniel Palanker,a) Alexander Vankov Cavitation bubbles accompany explosive vaporization of water following pulsed energy deposition in liquid can produce tissue damage at a distance exceeding the radius of the cavitation bubble by a factor of 4

  20. Diffusion Tensor Imaging in the Assessment of Normal-Appearing Brain Tissue Damage in

    E-Print Network [OSTI]

    Jiang,Tianzi

    (including medulla oblongata, cerebral peduncle, internal capsule and optic radiation), in corpus callosum Damage in Relapsing Neuromyelitis Optica C.S. Yu F.C. Lin K.C. Li T.Z. Jiang C.Z. Zhu W. Qin H. Sun P. Chan BACKGROUND AND PURPOSE: Normal-appearing brain tissue (NABT) damage was established in multiple

  1. DAMAGE DETECTION IN COMPOSITE STRUCTURES FROM FIBRE OPTIC DISTRIBUTED STRAIN MEASUREMENTS

    E-Print Network [OSTI]

    Boyer, Edmond

    of backscattered radiation), placing the plain optical fibre at the region where damage is expected. Because of itsDAMAGE DETECTION IN COMPOSITE STRUCTURES FROM FIBRE OPTIC DISTRIBUTED STRAIN MEASUREMENTS Alfredo the backscattered radiation ocurring at every point of the optical fibre by its natural disturbances, and three

  2. Potential effects of environmental contaminants on P450 aromatase activity and DNA damage in swallows

    E-Print Network [OSTI]

    Mora, Miguel A.

    Potential effects of environmental contaminants on P450 aromatase activity and DNA damage, to evaluate the potential effects of environmental contaminants on P450 aromatase activity in brain and gonads and DNA damage in blood cells. The tritiated water-release aromatase assay was used to measure aromatase

  3. Global Environmental Change 12 (2002) 197202 Increased crop damage in the US from excess precipitation

    E-Print Network [OSTI]

    2002-01-01T23:59:59.000Z

    Global Environmental Change 12 (2002) 197­202 Increased crop damage in the US from excess Laboratory, 1 Cyclotron Road, MS 90-4000, Berkeley, CA 94720, USA d Environmental Defense, 18 Tremont Street and worldwide have caused great damage to crop production. If the frequency of these weather extremes were

  4. UKEMI: Falling Motion Control to Minimize Damage to Biped Humanoid Robot

    E-Print Network [OSTI]

    itself. The same idea may be applied to a humanoid robot, and various passive structures can be usedUKEMI: Falling Motion Control to Minimize Damage to Biped Humanoid Robot Kiyoshi FUJIWARA Fumio This paper investigates a method to minimize damage to a humanoid robot when it falls over to the ground

  5. Biomass Company Sets Up Shop in High School Lab | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Biomass Company Sets Up Shop in High School Lab Biomass Company Sets Up Shop in High School Lab March 30, 2010 - 2:45pm Addthis Stephen Graff Former Writer & editor for Energy...

  6. Ener-Gee Whiz Answers Your Questions: Thermostat Settings and...

    Broader source: Energy.gov (indexed) [DOE]

    Ener-Gee Whiz Answers Your Questions: Thermostat Settings and Solar Water Heaters Ener-Gee Whiz Answers Your Questions: Thermostat Settings and Solar Water Heaters June 23, 2009 -...

  7. A comparison of routing sets for robust network design

    E-Print Network [OSTI]

    2013-07-24T23:59:59.000Z

    seen as a single stage robust program where the set of routings paths together ... called a routing template, which is used by all demand vectors in the uncertainty set. ...... A flexible model for resource management in virtual private networks.

  8. Differentiability properties of metric projections onto convex sets

    E-Print Network [OSTI]

    2014-08-17T23:59:59.000Z

    not difficult to see that polyhedral sets and spherical (also called ice-cream or Lorentz) cones are cone reducible. It is also possible to show that the sets (cones

  9. Hydrogen Goal-Setting Methodologies Report to Congress

    Fuel Cell Technologies Publication and Product Library (EERE)

    DOE's Hydrogen Goal-Setting Methodologies Report to Congress summarizes the processes used to set Hydrogen Program goals and milestones. Published in August 2006, it fulfills the requirement under se

  10. Users Manual for TMY3 Data Sets (Revised)

    SciTech Connect (OSTI)

    Wilcox, S.; Marion, W.

    2008-05-01T23:59:59.000Z

    This users manual describes how to obtain and interpret the data in the Typical Meteorological Year version 3 (TMY3) data sets. These data sets are an update to the TMY2 data released by NREL in 1994.

  11. THE INTEGRAL OF THE NORMAL AND FLUXES OVER SETS OF ...

    E-Print Network [OSTI]

    2014-06-18T23:59:59.000Z

    denote B(x, r) as the open ball of radius r and center at x. ...... It is well known that when a sequence of sets Ei, with ?Ei ? BV (Rn), converges in L1 to a set.

  12. Evolutionary dynamics in set structured populations Corina E. Tarnitaa

    E-Print Network [OSTI]

    Nowak, Martin A.

    Evolutionary dynamics in set structured populations Corina E. Tarnitaa , Tibor Antala , Hisashi a powerful method to study dynamical population structure: evolutionary set theory. The individuals of popu- lation structure on evolutionary and ecological dynamics. These approaches include spatial models

  13. Common Data Set 2005-06 Washington and Lee University

    E-Print Network [OSTI]

    Marsh, David

    Common Data Set 2005-06 Washington and Lee University 2005 Common Data Set Information Previous W:///Y|/ir/public_html/cds/cds2005.htm (1 of 28)12/1/2005 2:34:13 PM #12;Common Data Set 2005-06 Coeducational college Carnegie.htm (2 of 28)12/1/2005 2:34:13 PM #12;Common Data Set 2005-06 All other first- professionals 149 104

  14. Models of Arithmetic and Subuniform Bounds for the Arithmetic Sets

    E-Print Network [OSTI]

    Soare, Robert I.

    the Scott set of M. Clearly, when M j= TA, then the Scott set includes A. Since f(n; a) 2 ! \\Theta ! : M j(M). In particular, if a 2 DTA , then some enumeration of a Scott set which includes A is of degree Ÿ a. Further) is not total, or it is not the enumeration of a Scott set including A. Actually, it turns out that fig E can

  15. Functorial Quantum Field Theory in the Riemannian setting

    E-Print Network [OSTI]

    Santosh Kandel

    2015-02-25T23:59:59.000Z

    We construct examples of Functorial Quantum Field Theories in the Riemannian setting by quantizing free massive bosons.

  16. GENETIC AND MOLECULAR ANALYSIS OF DNA DAMAGE REPAIR AND TOLERANCE PATHWAYS.

    SciTech Connect (OSTI)

    SUTHERLAND, B.M.

    2001-07-26T23:59:59.000Z

    Radiation can damage cellular components, including DNA. Organisms have developed a panoply of means of dealing with DNA damage. Some repair paths have rather narrow substrate specificity (e.g. photolyases), which act on specific pyrimidine photoproducts in a specific type (e.g., DNA) and conformation (double-stranded B conformation) of nucleic acid. Others, for example, nucleotide excision repair, deal with larger classes of damages, in this case bulky adducts in DNA. A detailed discussion of DNA repair mechanisms is beyond the scope of this article, but one can be found in the excellent book of Friedberg et al. [1] for further detail. However, some DNA damages and paths for repair of those damages important for photobiology will be outlined below as a basis for the specific examples of genetic and molecular analysis that will be presented below.

  17. Nondestructive evaluation and characterization of damage and repair to continuous-fiber ceramic composite panels.

    SciTech Connect (OSTI)

    Sun, J. G.; Petrak, D. R.; Pillai, T. A. K.; Deemer, C.; Ellingson, W. A.

    1998-04-01T23:59:59.000Z

    Continuous fiber ceramic matrix composites are currently being developed for a variety of high-temperature applications. Because of the high costs of making these components, minor damage incurred during manufacturing or operation must be rewired in order to extend the life of the components. In this study, five ceramic-grade Nicalon{trademark} fiber/SiNC-matrix composite panels were intentionally damaged with a pendulum-type impactor during an impact test. The damaged panels were then repaired at Dow Corning Corporation. Three nondestructive evaluation (NDE) methods were used to study the characteristics of the panels after the damage and again after the panels were repaired. The NDE methods were X-ray radiography, infrared thermal imaging, and air-coupled ultrasound. The results showed that the impact test induced various types of damage in the panels. The NDE data that were obtained by the three NDE methods were correlated with each other.

  18. Application of Nonlinear Elastic Resonance Spectroscopy For Damage Detection In Concrete: An Interesting Story

    SciTech Connect (OSTI)

    Byers, Loren W. [Los Alamos National Laboratory; Ten Cate, James A. [Los Alamos National Laboratory; Johnson, Paul A. [Los Alamos National Laboratory

    2012-06-28T23:59:59.000Z

    Nonlinear resonance ultrasound spectroscopy experiments conducted on concrete cores, one chemically and mechanically damaged by alkali-silica reactivity, and one undamaged, show that this material displays highly nonlinear wave behavior, similar to many other damaged materials. They find that the damaged sample responds more nonlinearly, manifested by a larger resonant peak and modulus shift as a function of strain amplitude. The nonlinear response indicates that there is a hysteretic influence in the stress-strain equation of state. Further, as in some other materials, slow dynamics are present. The nonlinear response they observe in concrete is an extremely sensitive indicator of damage. Ultimately, nonlinear wave methods applied to concrete may be used to guide mixing, curing, or other production techniques, in order to develop materials with particular desired qualities such as enhanced strength or chemical resistance, and to be used for damage inspection.

  19. Laser induced fluorescence imaging of thermal damage in polymer matrix composites

    SciTech Connect (OSTI)

    Wachter, E.A.; Fisher, W.G.; Meyer, K.E.

    1996-12-31T23:59:59.000Z

    A simple, fluorescence-based imaging system was developed for identifying regions of thermal damage in polymer-matrix composites (PMCs). PMCs have important applications where low weight and high mechanical strength are needed. One concern in the aerospace industry is the tendency of some PMC materials to become irreversibly damaged when exposed to high temperatures. Traditional nondestructive evaluation (NDE) techniques are capable of detecting physical flaws, such as cracks and delaminations, but have not proven effective for detecting initial heat damage, which occurs on a molecular scale. Spectroscopic techniques such as laser-induced fluorescence provide an attractive means for detecting thermal damage on large, irregularly shaped surfaces. This paper describes instrumentation capable of rapidly detecting thermal damage in graphite/epoxy components.

  20. First results from electron-photon damage equivalence studies on a generic ethylene-propylene rubber

    SciTech Connect (OSTI)

    Buckalew, W.H.

    1986-04-01T23:59:59.000Z

    As part of a simulator adequacy assessment program, the relative effectiveness of electrons and photons to produce damage in a generic ethylene propylene rubber (EPR) has been investigated. The investigation was limited in extent in that a single EPR material, in three thickness, was exposed to Cobalt-60 photons and three electron beam energies. Basing material damage on changes in the EPR mechanical properties elongation and tensile strength, we observed that EPR damage was a smoothly varying function of absorbed energy and independent of irradiating particle type. EPR damage tracked equally well as a function of both incident particle energy and material front surface dose. Based on these preliminary data, we tentatively concluded that a correlation between particle, particle energy, and material damage (as measured by changes in material elongation and/or tensile strength) has been demonstrated. 14 figs.