Powered by Deep Web Technologies
Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


2

?? / Kagaku / ?? /Ky?ri: Science  

E-Print Network [OSTI]

question when considering science and technology in Japanese?? /Kagaku / ?? /Ky?ri: Science Tsukahara T?go Translationto incorporate and develop science and technology from the

Tsukahara, T?go

2012-01-01T23:59:59.000Z

3

NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastruct...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastructure NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastructure 2012 DOE Hydrogen and Fuel Cells...

4

QER Public Meeting in Newark, NJ: Electricity Transmission and...  

Energy Savers [EERE]

Newark, NJ: Electricity Transmission and Distribution - East QER Public Meeting in Newark, NJ: Electricity Transmission and Distribution - East New Jersey Institute of Technology...

5

February 2013 Siemens Princeton NJ Pascal Hitzler Semantic Data Analytics  

E-Print Network [OSTI]

February 2013 ­ Siemens Princeton NJ ­ Pascal Hitzler Semantic Data Analytics ­ The key://www.pascal-hitzler.de/ #12;February 2013 ­ Siemens Princeton NJ ­ Pascal Hitzler 2 Semantic Web journal · EiCs: Pascal://www.semantic-web-journal.net/ #12;February 2013 ­ Siemens Princeton NJ ­ Pascal Hitzler 3 Textbook Pascal Hitzler, Markus Krötzsch

Hitzler, Pascal

6

Palmco Power NJ, LLC | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoading map...(UtilityCounty,Orleans County,PPP EquipmentPartnersPalisadesPalmco Power NJ, LLC

7

Valero Refining Company - NJ | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,Save Energy NowNew HampshireValero Refining Company - NJ Jump to:

8

NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastruct...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Vehicle Technologies Program Review Presentation NJ COMPRESSED NATURAL GAS REFUSE TRUCKS, SHUTTLE BUSES AND INFRASTRUCTURE Chuck Feinberg, Principal Investigator New Jersey Clean...

9

Ya ri a bsod Collection 13  

E-Print Network [OSTI]

This collection contains fourteen songs collected in the grasslands of Amdo (northeast Tibet) in the area where Sichuan, Gansu, and Qinghai provinces meet. The songs represent various genres, and were all composed by Ya ri a bsod, an itinerant bard...

Sha bo don 'grub rdo rje; Skal dbang skyid

10

iU/riA ii riA Background and Technical Information for Collectors  

E-Print Network [OSTI]

m^ m im^Hii iU/riA ii riA Background and Technical Information for Collectors mmBiological Laboial Circular 111 #12;#12;DUCK STAMP DATA Background and Technical Information for Collectors By Edna N. Sater and conservationists, it aroused widespread interest among stamp collectors, many of whom had not previously collected

11

DOE - Office of Legacy Management -- Jersey City NJ Site - NJ 07  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou areDowntown SiteOhio FernaldGraniteJersey City NJ

12

DOE - Office of Legacy Management -- New Brunswick NJ Site - NJ 14  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou areDowntown SiteOhioMissouriMaywood SiteBrunswick NJ

13

WA_02_015_AIR_PRODUCTS_AND_CHEMICALS_INC_Waiver_of_Patent_Ri...  

Broader source: Energy.gov (indexed) [DOE]

15AIRPRODUCTSANDCHEMICALSINCWaiverofPatentRi.pdf WA02015AIRPRODUCTSANDCHEMICALSINCWaiverofPatentRi.pdf WA02015AIRPRODUCTSANDCHEMICALSINCWaiverofPatent...

14

Bi-directional dc-dc Converter  

Broader source: Energy.gov (indexed) [DOE]

MTBF Dc-dc Fabrication Validation Data Performance Validation BOM and Cost analysis EMIEMC Custom Components Fabrication Components Validation Vehicle System Review Phase-I...

15

NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastruct...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

0 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. tiarravt051feinberg2010...

16

WA_00_018_PRAXAIR_Waive_of_Domestic_and_Foreign_Invention_Ri...  

Broader source: Energy.gov (indexed) [DOE]

18PRAXAIRWaiveofDomesticandForeignInventionRi.pdf WA00018PRAXAIRWaiveofDomesticandForeignInventionRi.pdf WA00018PRAXAIRWaiveofDomesticandForeignInvention...

17

E-Print Network 3.0 - anti-ri-antibody-associated paraneoplastic...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ri-antibody-associated paraneoplastic syndrome Search Powered by Explorit Topic List Advanced Search Sample search results for: anti-ri-antibody-associated paraneoplastic syndrome...

18

SwRI's HEDGE Technology for High Efficiency, Low Emissions Gasoline...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

SwRI's HEDGE Technology for High Efficiency, Low Emissions Gasoline Engines SwRI's HEDGE Technology for High Efficiency, Low Emissions Gasoline Engines Presentation given at the...

19

DOE - Office of Legacy Management -- Wyckoff Steel Co - NJ 20  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou areDowntown Site -Miami -NewPlantSteel Co - NJ 20

20

DOE - Office of Legacy Management -- Maywood Site - NJ 10  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou areDowntown SiteOhioMissouriMaywood Site - NJ 10

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

DOE - Office of Legacy Management -- Middlesex Sampling Plant - NJ 04  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou areDowntown SiteOhioMissouriMaywood Site - NJ

22

EV Community Readiness projects: New York City and Lower Hudson...  

Broader source: Energy.gov (indexed) [DOE]

EV Community Readiness projects: New York City and Lower Hudson Valley Clean Communities, Inc. (NY, MA, PA); NYSERDA (ME, NH, VT, MA, RI, CT, NY, NJ, PA, DE, MD, DC) EV Community...

23

E-Print Network 3.0 - atlantic city nj Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Cape May Atlantic and Cape May October 1 December 31 100 66 166 NJ Atlantic City Ocean City ... Source: Hardy, Christopher R. - Biology Department, Millersville University...

24

NATURAL ATTENUATION FOR ECOSYSTEM RESTORATION IN NY/NJ HARBOR  

SciTech Connect (OSTI)

We have investigated the feasibility of using natural attenuation methods for ecosystem restoration in New York/New Jersey Harbor. Measurements were made of the most probable number of sulfate-reducing bacteria (SRB) in native sediments and in samples, which had been supplemented with an appropriate electron donor and electron acceptor. The results showed that the activity of the endogenous microbial population in the native sediment was high enough to make possible adequate chemical transformation rates. The bioavailability of the zinc in the sediments was measured using the BIOMET biosensor technique. The bioavailability of the zinc was effectively eliminated following the microbial activities. We concluded that natural attenuation could be used effectively in treating sediments from Newark Bay and surrounding waters and that the resultant materials could likely be used in environmental restoration projects of the type proposed for construction in South Kearny, NJ.

VAN DER LELIE,D.JONES,K.W.REID-GREEN,J.D.STERN,E.A.

2003-12-31T23:59:59.000Z

25

DC source assemblies  

DOE Patents [OSTI]

Embodiments of DC source assemblies of power inverter systems of the type suitable for deployment in a vehicle having an electrically grounded chassis are provided. An embodiment of a DC source assembly comprises a housing, a DC source disposed within the housing, a first terminal, and a second terminal. The DC source also comprises a first capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the first terminal. The DC source assembly further comprises a second capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the second terminal.

Campbell, Jeremy B; Newson, Steve

2013-02-26T23:59:59.000Z

26

UTILITY OF EXTRACTING CY PARTICLE ENERGY BY WAVES N.J. FISCH, M.C. HERRMANN  

E-Print Network [OSTI]

UTILITY OF EXTRACTING CY PARTICLE ENERGY BY WAVES N.J. FISCH, M.C. HERRMANN Princeton Plasma. The utility of extracting CY particle power, and then diverting this power to fast fuel ions, is investigated

27

Ri* Report No. 139 Danish Atomic Energy Commission  

E-Print Network [OSTI]

I 3 Ri* Report No. 139 Danish Atomic Energy Commission Research Establishment Riso Metallurgy Energy Commission Research Establishment Riso METALLURGY DEPARTMENT ANNUAL PROGRESS REPORT for th* Period, the Central Welding Institution and the Metallurgy Department has begun an evaluation of what research

28

RI&E Nano particles*) Carried out by  

E-Print Network [OSTI]

1 RI&E Nano particles*) Carried out by: Faculty: CTW/EWI/TNW Department: 1. Information Nano characteristics of nano material (or parent material) **) Carcinogenic Mutagenic Reprotoxic Density (kg/dm3 ) kg/dm3 State of aggregation of the nano material Liquid Solid 2. Health hazard nano material Danger

Twente, Universiteit

29

Building Scale DC Microgrids  

E-Print Network [OSTI]

resources, a 10 kW vertical axis wind turbine, and Fig. 4AC-grid Fig. 3. Vertical axis wind turbine in the AIT DC µ

Marnay, Chris

2013-01-01T23:59:59.000Z

30

Building Scale DC Microgrids  

E-Print Network [OSTI]

resources, a 10 kW vertical axis wind turbine, and Fig. 4the µgrid Fig. 3. Vertical axis wind turbine in the AIT DC µ

Marnay, Chris

2014-01-01T23:59:59.000Z

31

RES D.C.  

Broader source: Energy.gov [DOE]

RES DC, hosted by the National Center for American Indian Enterprise Development (The National Center), will feature access to respected tribal leaders, members of congress, federal agency...

32

Passive solar house in Skillman, NJ: Case study  

SciTech Connect (OSTI)

This study traces the history of a single family residence in Skillman, NJ designed by Harrison Fraker. The house, built in 1978, was conceived as primarily passive solar house intended to rely on solar energy for most of its heating needs. Solar features include direct gain windows, water walls and sunspace. The study documents original solar features, identifies changes over time and evaluates performance of the house. The owners have removed movable insulation and significantly reduced the amount of thermal mass over the life of the building. The owner reported comfort level changes intuitively consistent with those modifications. The owner is contemplating further changes to make the house more marketable, changes likely to further alter the remaining passive solar features. Builders Guide software was used to calculate changes in solar performance of the house related to building modifications. Calculations of solar performance generally correspond to anecdotal information from the owner. The author's attempts with Energy 10 program showed some promise, but are as yet inconclusive. At this time BG appears to be more useful and user friendly to the average practitioner with limited time and design resources. As a practicing architect the author is most interested in lessons to be learned from the past as they might contribute to future projects. Information gleaned from this study did confirm intuitively expected and currently disseminated thinking regarding passive solar design. The thermal mass proved to be vulnerable to change. Features which required daily manual adjustment were quickly discarded. Desire for comfort was driving force in changing the house and took precedence over the need to save energy or money.

Kendig, J.

1999-07-01T23:59:59.000Z

33

Atelier " i l ti ri e e l i e e ilie lli i el " e re er t ire e ri  

E-Print Network [OSTI]

Atelier " i l ti ri e e l i e e ilie lli i el " e re er t ire e ri A r e i ti e A r e l i e ti l i e et le r l e e l er et re l i " le i ti e" i i t er e i i e r le l r e elle ti te relle t et r r el t li #12; Atelier " i l ti ri e e l i e e ilie lli i el " e re er t ire e ri

Passot, Thierry

34

Quarry residuals RI/FS scoping document. [Weldon Spring quarry  

SciTech Connect (OSTI)

The purpose of this document is to serve as a planning tool for the implementation of the Quarry Residual Remedial Investigation/Feasibility Study (RI/FS) process and to provide direct input to revising and updating the 1988 Work Plan for the Weldon Spring Site Remedial Action Project (WSSRAP) Remedial Investigation/Feasibility Study-Environmental Impact Statement for the Weldon Spring Site (RI/FS-EIS) (Peterson et al. 1988) for this effort. The scoping process is intended to outline the tasks necessary to develop and implement activities in compliance with the Comprehensive Environmental Response, Compensation and Liability Act-National Environmental Policy Act (CERCLA-NEPA) process from detailed planning through the appropriate decision document. In addition to scoping the entire process, this document will serve as the primary tool for planning and accomplishing all activities to be developed in the Quarry Residual RI/FS Work Plan. Subsequent tasks are difficult to plan at this time. 10 refs., 5 figs., 5 tabs.

Not Available

1991-10-01T23:59:59.000Z

35

THE UBV(RI){sub C} COLORS OF THE SUN  

SciTech Connect (OSTI)

Photometric data in the UBV(RI){sub C} system have been acquired for 80 solar analog stars for which we have previously derived highly precise atmospheric parameters T{sub eff}, log g, and [Fe/H] using high-resolution, high signal-to-noise ratio spectra. UBV and (RI){sub C} data for 46 and 76 of these stars, respectively, are published for the first time. Combining our data with those from the literature, colors in the UBV(RI){sub C} system, with {approx_equal} 0.01 mag precision, are now available for 112 solar analogs. Multiple linear regression is used to derive the solar colors from these photometric data and the spectroscopically derived T{sub eff}, log g, and [Fe/H] values. To minimize the impact of systematic errors in the model-dependent atmospheric parameters, we use only the data for the 10 stars that most closely resemble our Sun, i.e., the solar twins, and derive the following solar colors: (B - V){sub Sun} = 0.653 {+-} 0.005, (U - B){sub Sun} = 0.166 {+-} 0.022, (V - R){sub Sun} = 0.352 {+-} 0.007, and (V - I){sub Sun} = 0.702 {+-} 0.010. These colors are consistent, within the 1{sigma} errors, with those derived using the entire sample of 112 solar analogs. We also derive the solar colors using the relation between spectral-line-depth ratios and observed stellar colors, i.e., with a completely model-independent approach, and without restricting the analysis to solar twins. We find (B - V){sub Sun} = 0.653 {+-} 0.003, (U - B){sub Sun} = 0.158 {+-} 0.009, (V - R){sub Sun} = 0.356 {+-} 0.003, and (V - I){sub Sun} = 0.701 {+-} 0.003, in excellent agreement with the model-dependent analysis.

Ramirez, I. [McDonald Observatory and Department of Astronomy, University of Texas at Austin, 1 University Station, C1400 Austin, TX 78712-0259 (United States); Michel, R.; Schuster, W. J. [Observatorio Astronomico Nacional, Universidad Nacional Autonoma de Mexico, Apartado Postal 877, Ensenada, B.C., CP 22800 (Mexico); Sefako, R.; Van Wyk, F. [South African Astronomical Observatory, P.O. Box 9, Observatory 7935, Cape Town (South Africa); Tucci Maia, M. [UNIFEI, DFQ-Instituto de Ciencias Exatas, Universidade Federal de Itajuba, Itajuba MG (Brazil); Melendez, J. [Departamento de Astronomia do IAG/USP, Universidade de Sao Paulo, Rua do Matao 1226, Sao Paulo, 05508-900 SP (Brazil); Casagrande, L. [Max-Planck-Institut fuer Astrophysik, Karl-Schwarzschild-Str. 1, Postfach 1317, D-85741 Garching (Germany); Castilho, B. V. [Laboratorio Nacional de Astrofisica/MCT, Rua Estados Unidos 154, 37504-364 Itajuba, MG (Brazil)

2012-06-10T23:59:59.000Z

36

Sediment Decontamination For Navigational And Environmental Restoration In NY/NJ Harbor Case Study: Passaic River, New Jersey  

E-Print Network [OSTI]

Sediment Decontamination For Navigational And Environmental Restoration In NY/NJ Harbor ­ Case, Arlington, VA 22230 Sediments in the NY/NJ Harbor are widely contaminated with toxic organic and inorganic compounds. Decontamination of these sediments is one tool that can be used to cope with the problems posed

Brookhaven National Laboratory

37

Abstract No. jone0514 Elemental Distributions for NY/NJ Harbor Sediments  

E-Print Network [OSTI]

Abstract No. jone0514 Elemental Distributions for NY/NJ Harbor Sediments K. Jones (BNL), H. Feng (Montclair State U.) and A. Lanzirotti (U. of Chicago) Beamline(s): X26A Sediments in the New York/New Jersey Waterways Sediments, is a useful material for use in investigation of the spatial variability. This standard

Brookhaven National Laboratory

38

Abstract No. jone0499 FTIR Measurement of Organic Functional Groups in NY/NJ Harbor Sediments  

E-Print Network [OSTI]

Abstract No. jone0499 FTIR Measurement of Organic Functional Groups in NY/NJ Harbor Sediments H. Jones (BNL) Beamline(s): U2B Sediments in urban rivers and estuaries are usually contaminated contaminated sediments cause to the environment and human health is now widely recognized and has stimulated

Brookhaven National Laboratory

39

Large Scale Wind Turbine Siting Map Report NJ Department of Environmental Protection  

E-Print Network [OSTI]

Large Scale Wind Turbine Siting Map Report NJ Department of Environmental Protection September 8 Jersey Department of Environmental Protection's (NJDEP) "Large Scale Wind Turbine Siting Map Management rules to address the development and permitting of wind turbines in the coastal zone

Holberton, Rebecca L.

40

Rutgers, The State University of New Jersey 88 Lipman Drive, New Brunswick, NJ 08901-8525  

E-Print Network [OSTI]

for savings. In some cases it may be economically beneficial to pay for a professional energy audit. SelectingRutgers, The State University of New Jersey 88 Lipman Drive, New Brunswick, NJ 08901-8525 Phone: 732.932.5000 Energy Consumption Electric Petroleum Natural Gas Gas Year 1 Year 4Year 3Year 2 Year 5

Goodman, Robert M.

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Company: American Pool Management Work Location: Edison, NJ Local Pools throughout Central and North Jersey  

E-Print Network [OSTI]

Company: American Pool Management Work Location: Edison, NJ ­ Local Pools throughout Central and North Jersey Pay Rate: $9-$12/hour Type of Business: Swimming Pool Management Job Title: Seasonal Staffing Assistant, Seasonal Area Supervisors, Seasonal Pool Managers, Seasonal Lifeguards Start Date: May

Hanson, Stephen José

42

Posted on Thu, Apr. 06, 2006 Laptop Orchestra boots up in N.J.  

E-Print Network [OSTI]

Posted on Thu, Apr. 06, 2006 Laptop Orchestra boots up in N.J. By David Patrick Stearns Inquirer for its highly portable equipment, and has up to 15 people onstage operating laptop computers, each/Still), to prosaic hand signals or, in one case, pieces of paper held up with printed directions containing

43

DC attenuation meter  

DOE Patents [OSTI]

A portable, hand-held meter used to measure direct current (DC) attenuation in low impedance electrical signal cables and signal attenuators. A DC voltage is applied to the signal input of the cable and feedback to the control circuit through the signal cable and attenuators. The control circuit adjusts the applied voltage to the cable until the feedback voltage equals the reference voltage. The "units" of applied voltage required at the cable input is the system attenuation value of the cable and attenuators, which makes this meter unique. The meter may be used to calibrate data signal cables, attenuators, and cable-attenuator assemblies.

Hargrove, Douglas L.

2004-09-14T23:59:59.000Z

44

Multiplatform Dynamic System Simulation of a DC-DC Converter.  

E-Print Network [OSTI]

??The work presented in this paper focuses on the usability testing for the Open-Modelica. The modeling and simulation of the BMR450 DC-DC converter is also… (more)

Song, Wenpeng

2012-01-01T23:59:59.000Z

45

A global maximum power point tracking DC-DC converter  

E-Print Network [OSTI]

This thesis describes the design, and validation of a maximum power point tracking DC-DC converter capable of following the true global maximum power point in the presence of other local maximum. It does this without the ...

Duncan, Joseph, 1981-

2005-01-01T23:59:59.000Z

46

DC arc weld starter  

DOE Patents [OSTI]

A system for starting an arc for welding uses three DC power supplies, a high voltage supply for initiating the arc, an intermediate voltage supply for sustaining the arc, and a low voltage welding supply directly connected across the gap after the high voltage supply is disconnected.

Campiotti, Richard H. (Tracy, CA); Hopwood, James E. (Oakley, CA)

1990-01-01T23:59:59.000Z

47

Fast and Accurate Algorithms for Projective Multi{Image Structure from John Oliensis (oliensis@research.nj.nec.com)  

E-Print Network [OSTI]

Genc Siemens Research Princeton, N.J. 08540 Abstract We describe algorithms for computing projective the possibility of transforming the structure and motion by a projective transformation. #12; 1 Introduction

48

650-nJ pulses from a cavity-dumped Yb:fiber-pumped ultrafast optical parametric oscillator  

E-Print Network [OSTI]

650-nJ pulses from a cavity-dumped Yb:fiber- pumped ultrafast optical parametric oscillator Tobias.p.lamour@hw.ac.uk Abstract: Sub-250-fs pulses with energies of up to 650 nJ and peak powers up to 2.07 MW were generated from a cavity-dumped optical parametric oscillator, synchronously-pumped at 15.3 MHz with sub-400-fs pulses from

49

Remedial Investigation/Feasibility Study (RI/FS) process, elements and techniques guidance  

SciTech Connect (OSTI)

This manual provides detailed guidance on Remedial Investigation/Feasibility Studies (RI/FSs) conducted pursuant to the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) at Department of Energy (DOE) facilities. The purpose of the RI/FS, to assess the risk posed by a hazardous waste site and to determine the best way to reduce that risk, and its structure (site characterization, risk assessment, screening and detailed analysis of alternatives, etc.) is defined in the National Oil and Hazardous Substances Pollution Contingency Plan (NCP) and further explained in the Environmental Protection Agency`s (EPA`s) Guidance for Conducting Remedial Investigations and Feasibility Studies Under CERCLA (Interim Final) 540/G-89/004, OSWER Directive 9355.3-01, October 1988. Though issued in 1988, the EPA guidance remains an excellent source of information on the conduct and structure of an RI/FS. This document makes use of supplemental RI/FS-related guidance that EPA has developed since its initial document was issued in 1988, incorporates practical lessons learned in more than 12 years of experience in CERCLA hazardous site remediation, and drawing on those lessons, introduces the Streamlined Approach For Environmental Restoration (SAFER), developed by DOE as a way to proceed quickly and efficiently through the RI/FS process at DOE facilities. Thus as its title implies, this guidance is intended to describe in detail the process and component elements of an RI/FS, as well as techniques to manage the RI/FS effectively.

Not Available

1993-12-01T23:59:59.000Z

50

Auxiliary resonant DC tank converter  

DOE Patents [OSTI]

An auxiliary resonant dc tank (ARDCT) converter is provided for achieving soft-switching in a power converter. An ARDCT circuit is coupled directly across a dc bus to the inverter to generate a resonant dc bus voltage, including upper and lower resonant capacitors connected in series as a resonant leg, first and second dc tank capacitors connected in series as a tank leg, and an auxiliary resonant circuit comprising a series combination of a resonant inductor and a pair of auxiliary switching devices. The ARDCT circuit further includes first clamping means for holding the resonant dc bus voltage to the dc tank voltage of the tank leg, and second clamping means for clamping the resonant dc bus voltage to zero during a resonant period. The ARDCT circuit resonantly brings the dc bus voltage to zero in order to provide a zero-voltage switching opportunity for the inverter, then quickly rebounds the dc bus voltage back to the dc tank voltage after the inverter changes state. The auxiliary switching devices are turned on and off under zero-current conditions. The ARDCT circuit only absorbs ripples of the inverter dc bus current, thus having less current stress. In addition, since the ARDCT circuit is coupled in parallel with the dc power supply and the inverter for merely assisting soft-switching of the inverter without participating in real dc power transmission and power conversion, malfunction and failure of the tank circuit will not affect the functional operation of the inverter; thus a highly reliable converter system is expected.

Peng, Fang Z. (Knoxville, TN)

2000-01-01T23:59:59.000Z

51

Improved DC Gun Insulator  

SciTech Connect (OSTI)

Many user facilities such as synchrotron light sources and free electron lasers require accelerating structures that support electric fields of 10-100 MV/m, especially at the start of the accelerator chain where ceramic insulators are used for very high gradient DC guns. These insulators are difficult to manufacture, require long commissioning times, and have poor reliability, in part because energetic electrons bury themselves in the ceramic, creating a buildup of charge and causing eventual puncture. A novel ceramic manufacturing process is proposed. It will incorporate bulk resistivity in the region where it is needed to bleed off accumulated charge caused by highly energetic electrons. This process will be optimized to provide an appropriate gradient in bulk resistivity from the vacuum side to the air side of the HV standoff ceramic cylinder. A computer model will be used to determine the optimum cylinder dimensions and required resistivity gradient for an example RF gun application. A ceramic material example with resistivity gradient appropriate for use as a DC gun insulator will be fabricated by glazing using doping compounds and tested.

M.L. Neubauer, K.B. Beard, R. Sah, C. Hernandez-Garcia, G. Neil

2009-05-01T23:59:59.000Z

52

Power flow analysis for DC voltage droop controlled DC microgrids  

E-Print Network [OSTI]

loss, such as photovoltaic panels, batteries, fuel cells, LEDs, and electronic loads, DC microgrids sharing and secondary voltage regulation can now be analytically studied, and specialized optimization of the DC microgrid, in term of systematic analysis, protection coordination design, network optimization

Chaudhary, Sanjay

53

NJ.?3  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545*.MSE Cores" _ ,' ,:.' :r-2 . . . * c

54

DOE - Office of Legacy Management -- Aluminum Co of America - NJ 24  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are here Home » SitesNJ 24 FUSRAP Considered Sites

55

DOE - Office of Legacy Management -- E I Du Pont - NJ 06  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are here Home »HillNY 28DorrE B Badger - MA- NJ

56

Help in N.J. for Those Struggling with Energy Costs | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensional Subject:Ground Hawaii CleanHeatin N.J. for Those Struggling with

57

Triple voltage dc-to-dc converter and method  

DOE Patents [OSTI]

A circuit and method of providing three dc voltage buses and transforming power between a low voltage dc converter and a high voltage dc converter, by coupling a primary dc power circuit and a secondary dc power circuit through an isolation transformer; providing the gating signals to power semiconductor switches in the primary and secondary circuits to control power flow between the primary and secondary circuits and by controlling a phase shift between the primary voltage and the secondary voltage. The primary dc power circuit and the secondary dc power circuit each further comprising at least two tank capacitances arranged in series as a tank leg, at least two resonant switching devices arranged in series with each other and arranged in parallel with the tank leg, and at least one voltage source arranged in parallel with the tank leg and the resonant switching devices, said resonant switching devices including power semiconductor switches that are operated by gating signals. Additional embodiments having a center-tapped battery on the low voltage side and a plurality of modules on both the low voltage side and the high voltage side are also disclosed for the purpose of reducing ripple current and for reducing the size of the components.

Su, Gui-Jia (Knoxville, TN)

2008-08-05T23:59:59.000Z

58

Catalog of DC Appliances and Power Systems  

E-Print Network [OSTI]

Appliance Efficient DC compatible replacement technology variable-speed compressor and fans run by brushless DC motor in place of single-speed compressors

Garbesi, Karina

2012-01-01T23:59:59.000Z

59

Bi-Directional DC-DC Converter for PHEV Applications  

SciTech Connect (OSTI)

Plug-In Hybrid Electric Vehicles (PHEV) require high power density energy storage system (ESS) for hybrid operation and high energy density ESS for Electric Vehicle (EV) mode range. However, ESS technologies to maximize power density and energy density simultaneously are not commercially feasible. The use of bi-directional DC-DC converter allows use of multiple energy storage, and the flexible DC-link voltages can enhance the system efficiency and reduce component sizing. This will improve fuel consumption, increase the EV mode range, reduce the total weight, reduce battery initial and life cycle cost, and provide flexibility in system design.

Abas Goodarzi

2011-01-31T23:59:59.000Z

60

Catalog of DC Appliances and Power Systems  

SciTech Connect (OSTI)

This document catalogs the characteristics of current and potential future DC products and power systems.

Garbesi, Karina; Vossos, Vagelis; Shen, Hongxia

2010-10-13T23:59:59.000Z

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Switching coordination of distributed dc-dc converters for highly efficient photovoltaic power plants  

DOE Patents [OSTI]

A distributed photovoltaic (PV) power plant includes a plurality of distributed dc-dc converters. The dc-dc converters are configured to switch in coordination with one another such that at least one dc-dc converter transfers power to a common dc-bus based upon the total system power available from one or more corresponding strings of PV modules. Due to the coordinated switching of the dc-dc converters, each dc-dc converter transferring power to the common dc-bus continues to operate within its optimal efficiency range as well as to optimize the maximum power point tracking in order to increase the energy yield of the PV power plant.

Agamy, Mohammed; Elasser, Ahmed; Sabate, Juan Antonio; Galbraith, Anthony William; Harfman Todorovic, Maja

2014-09-09T23:59:59.000Z

62

Light-weight DC to very high voltage DC converter  

DOE Patents [OSTI]

A DC-DC converter capable of generating outputs of 100 KV without a transformer comprises a silicon opening switch (SOS) diode connected to allow a charging current from a capacitor to flow into an inductor. When a specified amount of charge has flowed through the SOS diode, it opens up abruptly; and the consequential collapsing field of the inductor causes a voltage and current reversal that is steered into a load capacitor by an output diode. A switch across the series combination of the capacitor, inductor, and SOS diode closes to periodically reset the SOS diode by inducing a forward-biased current.

Druce, Robert L. (Union City, CA); Kirbie, Hugh C. (Dublin, CA); Newton, Mark A. (Livermore, CA)

1998-01-01T23:59:59.000Z

63

Light-weight DC to very high voltage DC converter  

DOE Patents [OSTI]

A DC-DC converter capable of generating outputs of 100 KV without a transformer comprises a silicon opening switch (SOS) diode connected to allow a charging current from a capacitor to flow into an inductor. When a specified amount of charge has flowed through the SOS diode, it opens up abruptly; and the consequential collapsing field of the inductor causes a voltage and current reversal that is steered into a load capacitor by an output diode. A switch across the series combination of the capacitor, inductor, and SOS diode closes to periodically reset the SOS diode by inducing a forward-biased current. 1 fig.

Druce, R.L.; Kirbie, H.C.; Newton, M.A.

1998-06-30T23:59:59.000Z

64

High efficiency resonant dc/dc converter for solar power applications .  

E-Print Network [OSTI]

??This thesis presents a new topology for a high efficiency dc/dc resonant power converter that utilizes a resistance compression network to provide simultaneous zero voltage… (more)

Inam, Wardah

2013-01-01T23:59:59.000Z

65

EUTROPHICATION A J Gold, University of Rhode Island, Kingston, RI, USA  

E-Print Network [OSTI]

EUTROPHICATION A J Gold, University of Rhode Island, Kingston, RI, USA J T Sims, University of Delaware, Newark, DE, USA Ã? 2005, Elsevier Ltd. All Rights Reserved. Introduction Eutrophication describes in nutrient inputs. Phosphorus (P) and nitrogen (N) are the nutrients that drive most eutrophication processes

Gold, Art

66

SwRI Patents Southwest Research Institute -Page 1 of 85  

E-Print Network [OSTI]

Substrates Using a Heated Center Electrode Ronghua Wei, Richard L. Johnson, Christopher Rincon, Michael A for Manipulating Cutting Elements for Earth-Boring Drill Bits and Tools David Keith Luce, Sean W. Wirth, Alan J of Network Links in a Communications Network Christopher B. Smith SwRI 8,679,852 3/25/2014 Particulate Matter

Chapman, Clark R.

67

From Bad to Worse: Senior economic inSecurity on the riSe  

E-Print Network [OSTI]

From Bad to Worse: Senior economic inSecurity on the riSe Tatjana Meschede Laura Sullivan Thomas the Senior Financial Stability Index, economic insecurity among senior households increased by one demographic groups, economic security of seniors has deteriorated further. Contrary to the popular belief

Snider, Barry B.

68

AC and DC power transmission  

SciTech Connect (OSTI)

The technical and economic assessment of AC and DC transmission systems; long distance transmission, cable transmission, system inter-connection, voltage support, reactive compensation, stabilisation of systems; parallel operation of DC links with AC systems; comparison between alternatives for particular schemes. Design and application equipment: design, testing and application of equipment for HVDC, series and shunt static compensated AC schemes, including associated controls. Installations: overall design of stations and conductor arrangements for HVDC, series and shunt static AC schemes including insulation co-ordination. System analysis and modelling.

Not Available

1985-01-01T23:59:59.000Z

69

DC to DC power converters and methods of controlling the same  

DOE Patents [OSTI]

A power generation system configured to provide direct current (DC) power to a DC link is described. The system includes a first power generation unit configured to output DC power. The system also includes a first DC to DC converter comprising an input section and an output section. The output section of the first DC to DC converter is coupled in series with the first power generation unit. The first DC to DC converter is configured to process a first portion of the DC power output by the first power generation unit and to provide an unprocessed second portion of the DC power output of the first power generation unit to the output section.

Steigerwald, Robert Louis; Elasser, Ahmed; Sabate, Juan Antonio; Todorovic, Maja Harfman; Agamy, Mohammed

2012-12-11T23:59:59.000Z

70

Steven Humphrey Named 2009 URITC Student of the Year The University of Rhode Island Transportation Center selected Steven Humphrey of Tiverton, RI as its  

E-Print Network [OSTI]

Transportation Center selected Steven Humphrey of Tiverton, RI as its 2009 Student of the Year in recognition

Rhode Island, University of

71

Catalog of DC Appliances and Power Systems  

E-Print Network [OSTI]

DC solar-powered DC air-conditioning heat pump produced byRoom Air Conditioners Geothermal Heat Pumps Lighting-efficiency of an air source electric heat-pump water heater

Garbesi, Karina

2012-01-01T23:59:59.000Z

72

DC systems with transformerless converters  

SciTech Connect (OSTI)

A technical and economic feasibility study of HVDC systems without converter transformers is presented. The presentation includes proposed solutions to the drawback related to the absence of galvanic separation between the ac and dc systems, if the converter transformers are eliminated. The results show that HVDC systems without converter transformers are both technically and economically feasible. The cost savings can be substantial.

Vithayathil, J.J.; Mittlestadt, W. [Bonneville Power Administration, Portland, OR (United States)] [Bonneville Power Administration, Portland, OR (United States); Bjoerklund, P.E. [ABB Power Systems AB, Ludvika (Sweden)] [ABB Power Systems AB, Ludvika (Sweden)

1995-07-01T23:59:59.000Z

73

Reliability Assessment of Fault-Tolerant Dc-Dc Converters for Photovoltaic Applications  

E-Print Network [OSTI]

Reliability Assessment of Fault-Tolerant Dc-Dc Converters for Photovoltaic Applications Sairaj V performance and reliability analysis of switch-mode, dc-dc power converters employed as front ends of the converter's steady-state operation on device failure rates. Markov reliability models are derived to assess

Liberzon, Daniel

74

Design and development of a DC-DC converter for a fuel cell inverter system  

E-Print Network [OSTI]

This thesis outlines the design and development of a DC-DC converter for a fuel cell inverter application. The proposed DC-DC converter was designed and tested at Texas A&M to meet the specifications laid down for the '2001 Future Energy Challenge...

Gopinath, Rajesh

2001-01-01T23:59:59.000Z

75

DC WRRC Report No. 92 Directory of University Water  

E-Print Network [OSTI]

DC WRRC Report No. 92 Directory of University Water Expertise in the District of Columbia DC Water Avenue, NW Washington, DC 20008 #12;DC WRRC Report No. 92 Directory of University Water Expertise of Columbia 4200 Connecticut Avenue, NW Washington, DC 20008 #12;DC-WRRC Report No. 92 DIRECTORY OF UNIVERSITY

District of Columbia, University of the

76

Uncertainties in NDE Reliability and Assessing the Impact on RI-ISI  

SciTech Connect (OSTI)

A major thrust in the past 20 years has been to upgrade nondestructive examinations (NDE) for use in inservice inspection (ISI) programs to more effectively manage degradation at operating nuclear power plants. Risk-informed ISI (RI-ISI) is one of the outcomes of this work, and this approach relies heavily on the reliability of NDE, when properly applied, to detect sources of expected degradation. There have been a number of improvements in the reliability of NDE, specifically in ultrasonic testing (UT), through training of examiners, and improved equipment and procedure development. However, the most significant improvements in UT were derived by moving from prescriptive requirements to performance based requirements. Even with these substantial improvements, NDE contains significant uncertainties and RI-ISI programs need to address and accommodate this factor. As part of the work that PNNL is conducting for the U. S. Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, we are examining the impact of these uncertainties on the effectiveness of RI-ISI programs.

Doctor, Steven R.; Anderson, Michael T.

2010-08-01T23:59:59.000Z

77

Active dc filter for HVDC systems  

SciTech Connect (OSTI)

This article is a case history of the installation of active dc filters for high-performance, low-cost harmonics filtering at the Lindome converter station in the Konti-Skan 2 HVDC transmission link between Denmark and Sweden. The topics of the article include harmonics, interference, and filters, Lindome active dc filter, active dc filter design, digital signal processor, control scheme, protection and fault monitoring, and future applications.

Zhang, W. (Royal Inst. of Tech., Stockholm (Sweden)); Asplund, G.

1994-01-01T23:59:59.000Z

78

New Architectures for Radio-Frequency DC-DC Power Conversion  

E-Print Network [OSTI]

This document proposes two new architectures for switched-mode dc–dc power conversion. The proposed architectures enable dramatic increases in switching frequency to be realized while preserving features critical in practice, ...

Rivas, Juan M.

79

DC to DC power conversion module for the all-electric ship  

E-Print Network [OSTI]

The MIT end to end electric ship model is being developed to study competing electric ship designs. This project produced a model of a Power Conversion Module (PCM)- 4, DC-to-DC converter which interfaces with the MIT ...

Gray, Weston L

2011-01-01T23:59:59.000Z

80

Computer-aided optimization of DC/DC converters for automotive applications  

E-Print Network [OSTI]

This paper investigates computer-aided optimization of DC/DC converters, with a focus on converters for dual-voltage automotive electrical systems. A new CAD optimization approach based on Monte Carlo search methods is ...

Neugebauer, Timothy C.

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Program stat3d.c /* Program: stat3d.c */  

E-Print Network [OSTI]

85 Program stat3d.c /************************************************************************/ /* */ /* Program: stat3d.c */ /* Purpose: To read in a 3-D image and output phase volumes */ /* and report("Phase Volume Surface Volume Surface \

Bentz, Dale P.

82

High efficiency resonant dc/dc converter for solar power applications  

E-Print Network [OSTI]

This thesis presents a new topology for a high efficiency dc/dc resonant power converter that utilizes a resistance compression network to provide simultaneous zero voltage switching and near zero current switching across ...

Inam, Wardah

2013-01-01T23:59:59.000Z

83

Catalog of DC Appliances and Power Systems  

E-Print Network [OSTI]

48V DC , depending on battery bank configuration. Lifetime:Characteristics: Lead-acid battery banks are composed ofto produce the desired battery bank voltage. Typical battery

Garbesi, Karina

2012-01-01T23:59:59.000Z

84

26 Tesla DC Magnet for Neutron Scattering  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Previously, DC Magnets located at Neutron-Scattering Beamlines were commercially-manufactured superconducting magnets and limited to 17 T. A few pulsed magnet systems have been...

85

Experimental Approach to Stellar Reactions with RI Beams - Overview of Experiments on Hydrogen Burning -  

E-Print Network [OSTI]

After a short review on resent developments achieved in astrophysics in the past years since last NN conference, experimental efforts in nuclear astrophysics primarily with RI beams were revisited, especially on the works relevant to neutron-deficient nuclei, the other half of the nuclear chart reviewed by Rehm in this conference. A new interesting recognition discussed in the past years is the important role of explosive hydrogen burning process in the very early stage of type II supernovae. A new broadening research field related to the first generation stars both from observations as well as from nuclear astrophysics was also discussed.

S. Kubono

2007-05-28T23:59:59.000Z

86

DC-based magnetic field controller  

DOE Patents [OSTI]

A magnetic field controller for laboratory devices and in particular to dc operated magnetic field controllers for mass spectrometers, comprising a dc power supply in combination with improvements to a hall probe subsystem, display subsystem, preamplifier, field control subsystem, and an output stage.

Kotter, Dale K. (Shelley, ID); Rankin, Richard A. (Ammon, ID); Morgan, John P,. (Idaho Falls, ID)

1994-01-01T23:59:59.000Z

87

DC-based magnetic field controller  

DOE Patents [OSTI]

A magnetic field controller is described for laboratory devices and in particular to dc operated magnetic field controllers for mass spectrometers, comprising a dc power supply in combination with improvements to a Hall probe subsystem, display subsystem, preamplifier, field control subsystem, and an output stage. 1 fig.

Kotter, D.K.; Rankin, R.A.; Morgan, J.P.

1994-05-31T23:59:59.000Z

88

High voltage DC power supply  

DOE Patents [OSTI]

A high voltage DC power supply having a first series resistor at the output for limiting current in the event of a short-circuited output, a second series resistor for sensing the magnitude of output current, and a voltage divider circuit for providing a source of feedback voltage for use in voltage regulation is disclosed. The voltage divider circuit is coupled to the second series resistor so as to compensate the feedback voltage for a voltage drop across the first series resistor. The power supply also includes a pulse-width modulated control circuit, having dual clock signals, which is responsive to both the feedback voltage and a command voltage, and also includes voltage and current measuring circuits responsive to the feedback voltage and the voltage developed across the second series resistor respectively. 7 figs.

Droege, T.F.

1989-12-19T23:59:59.000Z

89

High voltage DC power supply  

DOE Patents [OSTI]

A high voltage DC power supply having a first series resistor at the output for limiting current in the event of a short-circuited output, a second series resistor for sensing the magnitude of output current, and a voltage divider circuit for providing a source of feedback voltage for use in voltage regulation is disclosed. The voltage divider circuit is coupled to the second series resistor so as to compensate the feedback voltage for a voltage drop across the first series resistor. The power supply also includes a pulse-width modulated control circuit, having dual clock signals, which is responsive to both the feedback voltage and a command voltage, and also includes voltage and current measuring circuits responsive to the feedback voltage and the voltage developed across the second series resistor respectively.

Droege, Thomas F. (Batavia, IL)

1989-01-01T23:59:59.000Z

90

DC Microgrids Scoping Study: Estimate of Technical and Economic...  

Energy Savers [EERE]

manufacturers, power system designers, and researchers are demonstrating and deploying DC power distribution systems for applications where the end-use loads are natively DC, e.g.,...

91

INL Efficiency and Security Testing of EVSE, DC Fast Chargers...  

Broader source: Energy.gov (indexed) [DOE]

INL Efficiency and Security Testing of EVSE, DC Fast Chargers, and Wireless Charging Systems INL Efficiency and Security Testing of EVSE, DC Fast Chargers, and Wireless Charging...

92

2nd Int. Symp. on Lithium Applications for Fusion Devices, April 27-29, 2011, Princeton, NJ Program for the 2nd International Symposium  

E-Print Network [OSTI]

Plasma-Material Interactions with evaporated lithium coatings in NSTX 1:50 ­ 2:10 M. A. Jaworski 2nd Int. Symp. on Lithium Applications for Fusion Devices, April 27-29, 2011, Princeton, NJ Program for the 2nd International Symposium on Lithium Applications for Fusion Devices April 27-29, 2011

Princeton Plasma Physics Laboratory

93

February 9, 2012 Consider the non-spherical wrist of the Comau Smart5 NJ4 170 robot, i.e., the last three revolute  

E-Print Network [OSTI]

((t)) a linear Cartesian path with constant speed = 1. The robot is initially in the configuration q(0) = /3 /2Robotics I February 9, 2012 Exercise 1 Consider the non-spherical wrist of the Comau Smart5 NJ4 170 robot, i.e., the last three revolute joints of this 6R structure (see Fig. 1). The associated Denavit

De Luca, Alessandro

94

32192UniprintNT11.09NJ HE105 Updated November 2013 Controlled by Coordinator Higher Education Enrolments & Fees PAGE 1 of 1  

E-Print Network [OSTI]

32192UniprintNT11.09NJ HE105 Updated November 2013 · Controlled by Coordinator Higher Education Enrolments & Fees PAGE 1 of 1 Higher Education Employer Authorisation Form Higher Education to withdraw this contract, for any reason, during 2014. Higher Education Fees are subject to the Higher

95

National Aeronautics and Space Administration Washington, DC  

E-Print Network [OSTI]

National Aeronautics and Space Administration Washington, DC NASA ADVISORY COUNCIL PLANETARY, including Discovery @15 and Satellites of the Outer Solar System. The next workshop, Planetary Atmospheres (GRAIL)--a lunar mission, Origins Spectral Interpretation, Resource Identification, and Security (OSIRIS

Rathbun, Julie A.

96

DC readout experiment in Enhanced LIGO  

E-Print Network [OSTI]

The two 4 km long gravitational wave detectors operated by the Laser Interferometer Gravitational-wave Observatory (LIGO) were modified in 2008 to read out the gravitational wave channel using the DC readout form of homodyne ...

Fricke, Tobin T

97

Hydrogen Storage Systems Analysis Working Group Meeting Argonne DC Offices  

E-Print Network [OSTI]

Hydrogen Storage Systems Analysis Working Group Meeting Argonne DC Offices L'Enfant Plaza, Washington, DC December 4, 2007 SUMMARY REPORT Compiled by Romesh Kumar Argonne National Laboratory Working Group Meeting December 4, 2007 Argonne DC Offices, L'Enfant Plaza, Washington, DC Meeting

98

DC WRRC Report No. 142 Directory of University Water Expertise  

E-Print Network [OSTI]

DC WRRC Report No. 142 Directory of University Water Expertise in the District of Columbia r DC.B. 5004 Washington, D.C. 20008 #12;DC WRRC Report No. 142 Directory of University Water Expertise ............ 26 FACULTY INDEX .......................................... 29 DIRECTORY UPDATE FORM

District of Columbia, University of the

99

On Maximum Available Feedback and PID Control -1 IEEE SMC UK&RI Applied Cybernetics Dr Richard Mitchell 2005  

E-Print Network [OSTI]

On Maximum Available Feedback and PID Control - 1 IEEE SMC UK&RI Applied Cybernetics © Dr Richard Mitchell 2005 ON MAXIMUM AVAILABLE FEEDBACK AND PID CONTROL Dr Richard Mitchell, Cybernetics, University frequencies A recent IEEE SMC Paper describes a robust PID controller whose phase is flat at key frequencies

Mitchell, Richard

100

Speech enhancement using STFT of real and imaginary parts of modulation This paper investigates an alternate modulation (RI-  

E-Print Network [OSTI]

Speech enhancement using STFT of real and imaginary parts of modulation signals Abstract This paper investigates an alternate modulation (RI- modulation) AMS-based framework for speech enhancement, in which real subtraction. Experiments presented also show that while this framework is suited to speech enhancement

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Phase-Shifted Full Bridge DC-DC Converter with Energy Recovery Clamp and Reduced Circulating Current  

E-Print Network [OSTI]

of the switch conduction and turn-off losses achieved by an energy recovery secondary clamp circuit an improved PSFB DC-DC converter using only a modified energy recovery clamp circuit attached at the secondaryPhase-Shifted Full Bridge DC-DC Converter with Energy Recovery Clamp and Reduced Circulating

102

FC/Battery Power Management for Electric Vehicle Based Interleaved dc-dc Boost Converter Topology  

E-Print Network [OSTI]

FC/Battery Power Management for Electric Vehicle Based Interleaved dc- dc Boost Converter Topology power systems in electric vehicle application, in order to decrease the FC current ripple. Therefore the performance of the FC system during transient and instantaneous peak power demands in electric vehicle

Paris-Sud XI, Université de

103

New Experimental Data in DC745U  

SciTech Connect (OSTI)

The objectives of this project are: (1) study the molecular and mechanical properties of DC745U - (a) DC745U is a silicone elastomer used in several weapons systems, (b) depending on their chemistry and formulation, polymers can be susceptible to damage and failures due to weak chemical linkages and physical interactions, (c) inefficient production processes can generate heterogeneities throughout the material that can contribute negatively to the overall performance and lifetime of the polyer, (d) aging, long-term thermal and radioactive conditions, and mechanical strains can affect the materials network structure and contribute to the degradation of the production; (2) characterization of DC745U materials cured under different conditions to determine possible differences to the polymer structure; and (3) this work is relevant to mission-critical programs and for supporting programmatic work for weapon research.

Ortiz-Acosta, Denisse [Los Alamos National Laboratory; Cady, Carl [Los Alamos National Laboratory; Densmore, Crystal [Los Alamos National Laboratory

2012-06-18T23:59:59.000Z

104

DC High School Science Bowl Regionals | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

DC High School Science Bowl Regionals DC High School Science Bowl Regionals February 22, 2014 1:15PM to 8:15PM EST Department of Energy headquarters - 1000 Independence Ave SW,...

105

National Science Bowl Brings Best and Brightest to DC | Department...  

Broader source: Energy.gov (indexed) [DOE]

National Science Bowl Brings Best and Brightest to DC National Science Bowl Brings Best and Brightest to DC April 24, 2012 - 11:14am Addthis The National Science Bowl is the...

106

National Small Business Federal Contracting Summit-DC Fall Conference...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

National Small Business Federal Contracting Summit-DC Fall Conference National Small Business Federal Contracting Summit-DC Fall Conference November 6, 2014 8:00AM to 4:00PM EST...

107

Federal Government Congressional Budget Office, Budget Analysis Division Washington, DC  

E-Print Network [OSTI]

Administration, Center for Drug Evaluation and Research Washington, DC Federal Energy Regulatory CommissionFederal Government Congressional Budget Office, Budget Analysis Division Washington, DC Department Environmental Protection Agency, Office of Transportation & Air Quality Ann Arbor, MI Federal Drug

Shyy, Wei

108

achyrocline satureioides dc: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and DC, microgrid, with its definition as a local grid that comprises distributed generation, energy storage systems to the frequency in the AC bulk grid, the DC voltage in the...

109

Halbach array DC motor/generator  

DOE Patents [OSTI]

A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An "inside-out" design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then "switched" or "commutated" to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives.

Merritt, Bernard T. (Livermore, CA); Dreifuerst, Gary R. (Livermore, CA); Post, Richard F. (Walnut Creek, CA)

1998-01-01T23:59:59.000Z

110

Halbach array DC motor/generator  

DOE Patents [OSTI]

A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An ``inside-out`` design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then ``switched`` or ``commutated`` to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives. 17 figs.

Merritt, B.T.; Dreifuerst, G.R.; Post, R.F.

1998-01-06T23:59:59.000Z

111

FEDERAL ENERGY WASHINGTON, D.C. 20426  

E-Print Network [OSTI]

FEDERAL ENERGY REGULATORY COMMISSION WASHINGTON, D.C. 20426 NEWS RELEASE NEWS MEDIA CONTACT judge, the Federal Energy Regulatory Commission today ordered an expedited fact-finding hearing of the discussions. #12;Chairman Curt L. Hébert, Jr. stated as follows: "At some point, regulatory and R-01-33 (more

Laughlin, Robert B.

112

Energy Training Session for DC Elementary School Teachers  

Broader source: Energy.gov [DOE]

Are you an elementary school teacher in Washington, DC, looking for creative ideas to introduce energy curriculum to your students?

113

A Three-Phase Bidirectional DC-DC Converter for Automotive Applications  

SciTech Connect (OSTI)

This paper presents a three-phase soft-switching, bidirectional dc-dc converter for high-power automotive applications. The converter employs dual three-phase active bridges and operates with a novel asymmetrical but fixed duty cycle for the top and bottom switches of each phase leg. Simulation and experimental data on a 6-kW prototype are included to verify the novel operating and power flow control principles.

Su, Gui-Jia [ORNL; Tang, Lixin [ORNL

2008-01-01T23:59:59.000Z

114

Aalborg Universitet Hierarchical Control for Multiple DC Microgrids Clusters  

E-Print Network [OSTI]

Aalborg Universitet Hierarchical Control for Multiple DC Microgrids Clusters Shafiee, Qobad Control for Multiple DC Microgrids Clusters. I E E E Transactions on Energy Conversion. General rights, J. C. Vasquez, and J. M. Guerrero, "Hierarchical Control for Multiple DC-Microgrids Clusters," IEEE

Vasquez, Juan Carlos

115

Transportation YOU 2013 DC Youth Summit WTS Transportation YOU  

E-Print Network [OSTI]

Transportation YOU 2013 DC Youth Summit WTS Transportation YOU CTS Research Conference May 21, 2014 Lisa Rasmussen, WTS / Kimley-Horn and Associates, Inc #12;Transportation YOU 2013 DC Youth SummitTransportation YOU 2013 DC Youth Summit Agenda What is Transportation YOU? Transportation YOU ­ WTS Local Chapter

Minnesota, University of

116

A Cascade Multilevel Inverter Using a Single DC Source  

E-Print Network [OSTI]

A Cascade Multilevel Inverter Using a Single DC Source Zhong Du1, Leon M. Tolbert2 3, John N inverter can be implemented using only a single DC power source and capacitors. A standard cascade multilevel inverter requires DC sources for 2 + 1 levels. Without requiring transformers, the scheme proposed

Tolbert, Leon M.

117

SUBMITTED TO: THE D.C. WATER RESOURCES RESEARCH CENTER  

E-Print Network [OSTI]

chemicals and heavy metals such as lead'. Several published reports have suggested that D.C. public waterMARCH 1996 SUBMITTED TO: THE D.C. WATER RESOURCES RESEARCH CENTER UNIVERSITY OF THE DISTRICT OF COLUMBIA WASHINGTON, D.C. 20008 SUBMITTED BY: DR. KWAMENA OCRAN LEAD IN RESIDENTIAL DRINKING WATER: RISK

District of Columbia, University of the

118

Offering Songs, Festive Songs, Processional Songs mGar-gLu, Khro-Glu, Phebsnga: Khang Lhamo, Yandol & Pema Dolma Music: Ri di ngak me ri la, 'The belt on the boots'  

E-Print Network [OSTI]

di ngak me ri la Translation of title The belt on the boots Description (to be used in archive entry) A song about festive dress and customs. Genre or type (i.e. epic, song, ritual) ‘khro glu (festive song) Medium (i.e. reel to reel, web... objects used in performance Level of public access (fully closed, fully open) Fully open for web streaming Notes and context (include reference to any related documentation, such as photographs) "This belt is really long on the boots. If we use...

Blumenthal, Katey

119

DC side filters for multiterminal HVDC systems  

SciTech Connect (OSTI)

Multiterminal HVDC systems present challenges in the specification and design of suitable dc side filtering. This document examines the existing experience and addresses the particular technical problems posed by multiterminal systems. The filtering requirements of small taps are discussed, as is the potential use of active filters. Aspects of calculation and design are considered and recommendations made to guide the planners and designers of future multiterminal schemes.

Shore, N.L.; Adamson, K.; Bard, P. [and others] [and others

1996-10-01T23:59:59.000Z

120

Good Energies (Washington DC) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to: navigation,Ohio: Energy Resources Jump to:GloriaGoldenGolden,CookWashington DC) Jump

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Grow NJ (New Jersey)  

Broader source: Energy.gov [DOE]

A business creating or retaining jobs in New Jersey and making a qualified capital investment at a qualified business facility can apply for grants of corporate business tax credits for job...

122

Low-energy RI beam technology and nuclear clusters in the explosive pp-chain breakout process  

SciTech Connect (OSTI)

The lecture includes two parts: One is a discussion on the technology for developing RIB beam facility based on the in-flight method and relevant experimental technology. The second part is a discussion on experimental efforts for studying the breakout process from the pp-chain region based on recent works with low energy RI beams. The discussion of the second part specifically covers the problem of the vp-process in type II supernovae in terms of alpha cluster nature for the reactions.

Kubono, S. [Institute of Modern Physics, Chinese Academy of Sciences, Nanchang Road 509, Lanzhou 73000 (China); RIKEN Nishina Center, 2-1 Hirosawa, Wako, Saitama 351-0198 (Japan); Center for Nuclear Study, University of Tokyo, 2-1 Hirosawa, Wako, Saitama 351-0 (Japan); Yamaguchi, H.; Kahl, D. M.; Ohshiro, Y.; Watanabe, S.; Yamazaki, N. [Center for Nuclear Study, University of Tokyo, 2-1 Hirosawa, Wako, Saitama 351-0198 (Japan); Teranishi, T. [Department of Physics, Kyushu University, 6-10-1 Hakozaki, Fukuoka 812-858 (Japan); Yanagisawa, Y.; Wakabayashi, Y.; Kase, M. [RIKEN Nishina Center, 2-1 Hirosawa, Wako, Saitama 351-0198 (Japan); Hayakawa, S. [Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare, Via S. Sofia 62, 95125 Catania (Italy); Kwon, Y. K. [Institute for Basic Science, 70, Yuseong-daero 1689-gil, Yuseong-gu, Daejeon 305-81 (Korea, Republic of); Hashimoto, T.; Fukuda, Y. [Research Center for Nuclear Physics, Osaka University, 10-1 Mihogaoka, Ibaraki, Osaka 567-0047 (Japan); He, J. J. [Institute of Modern Physics, Chinese Academy of Sciences, Nanchang Road 509, Lanzhou 73000 (China); Goto, A. [Faculty of Medcine, Yamagata University, Yamagata 990-2331 (Japan); Muto, H. [Center of General Education, Tokyo University of Science at Suwa, Chino, Nagano 391-0292 (Japan)

2014-05-09T23:59:59.000Z

123

Design and implementation of a scalable encryption processor with embedded variable dc/dc converter  

E-Print Network [OSTI]

This work describes the design and implementation of an energy-efficient, scalable encryption processor that utilizes variable voltage supply techniques and a highefficiency embedded variable output DC/DC converter. The resulting implementation dissipates 134nJ/bit @ V DD = 2.5V, when encrypting at its maximum rate of 1Mb/s using a maximum datapath width of 512 bits. The embedded converter achieves an efficiency of 96 % at this peak load. The processor is 2-3 orders of magnitude more energy efficient than optimized assembly code running on a low-power processor such as the StrongARM. 2.

James Goodman; Anantha Chandrakasan; Abram P. Dancy

1999-01-01T23:59:59.000Z

124

DC-DC Converter Topology Assessment for Large Scale Distributed Photovoltaic Plant Architectures  

SciTech Connect (OSTI)

Distributed photovoltaic (PV) plant architectures are emerging as a replacement for the classical central inverter based systems. However, power converters of smaller ratings may have a negative impact on system efficiency, reliability and cost. Therefore, it is necessary to design converters with very high efficiency and simpler topologies in order not to offset the benefits gained by using distributed PV systems. In this paper an evaluation of the selection criteria for dc-dc converters for distributed PV systems is performed; this evaluation includes efficiency, simplicity of design, reliability and cost. Based on this evaluation, recommendations can be made as to which class of converters is best fit for this application.

Mohammed S. Agamy; Maja Harfman-Todorovic; Ahmed Elasser; Juan A. Sabate; Robert L. Steigerwald; Yan Jiang; Somasundaram Essakiappan

2011-07-01T23:59:59.000Z

125

Dc's blog | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address:011-DNA Jump to:52c8ff988c1 No38e4011f618b No revision hasDawesCountyNewDc's blog Home

126

RES D.C. | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015 | DepartmentLoans |QuerylNuclear Power Plant DocketRES D.C.

127

Fun D.C. Jobs for Physicists  

SciTech Connect (OSTI)

Physicists make valuable contributions in a wide variety of careers, including those in Washington. Many national challenges, including energy, innovation, and security, create a demand for technically-competent individuals across government. Clark will discuss some of the many programs in D.C. designed to attract the best and brightest minds, from grad-students to professors, from short-term assignments to whole new careers. These are great opportunities to use your expertise and enrich your knowledge of the broader scientific enterprise, all while serving society.

Clark Cully

2009-09-30T23:59:59.000Z

128

User:Dc | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExplorationUT-gTagusparkCalculator JumpUnitedBeowaweColin.mccormick JumpDbowers JumpDc

129

Sandia National Laboratories: DC power optimizers  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared0EnergySandia Involves Wind-FarmCool EarthSafetyCzech RadioactiveDC

130

Wide input range DC-DC converter with digital control scheme  

E-Print Network [OSTI]

boost converter a battery or ultracapacitor energy storage is connected to take care of the fuel cell slow transient response (200 watts/min). The robust features of the proposed control system ensure a constant output DC voltage for a variety of load...

Harfman Todorovic, Maja

2006-04-12T23:59:59.000Z

131

XL-DC/Mark V Options You can customize the XL-DC and Mark V  

E-Print Network [OSTI]

administrator with the NTP Time Server Protocol, network status, and statistics. This feature implements SNMP. XL-DC Mark V Network Time Server Telecommunications Interface Frequency Measurement STD Time Interface Low Phase Noise Output Network Interface Loss of Lock Alarm STD Programmable Pulse Output

Berns, Hans-Gerd

132

Washington DC Reliability Requirements and the Need to Operate...  

Broader source: Energy.gov (indexed) [DOE]

Washington DC Reliability Requirements and the Need to Operate Mirant's Potomac River Generation Station to Support Local Area Reliability (Oak Ridge National Laboratory 2005)...

133

PHOTOVOLTAIC DC ARC FAULT DETECTOR TESTING AT SANDIA NATIONAL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

PHOTOVOLTAIC DC ARC FAULT DETECTOR TESTING AT SANDIA NATIONAL LABORATORIES Jay Johnson 1 , Birger Pahl 2 , Charles Luebke 2 , Tom Pier 2 , Theodore Miller 3 , Jason Strauch 1 ,...

134

DC Resistivity Survey (Wenner Array) At Mt Princeton Hot Springs...  

Open Energy Info (EERE)

Determination of groundwater flux patterns Notes Researchers measured DC resistivity and produced 12 resistivity profiles, each approximately 1.3 km in length. Equilibrium...

135

DC Bus Capacitor Manufacturing Facility for Electric Drive Vehicles...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

0 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. apearravt028boan2010...

136

Energy Challenge Two: The WeatherizeDC Campaign | Department...  

Broader source: Energy.gov (indexed) [DOE]

economic and environmental justice by creating clean energy career opportunities for people who need them most. The DC Project applies cutting-edge organizing tools and tactics...

137

EE443L Lab 2: Modeling a DC Motor Introduction  

E-Print Network [OSTI]

: In this lab we will develop and validate a basic model of a permanent magnet DC motor (Yaskawa Electric MINI: The DC motor is a common actuator in control systems that converts electrical energy into rotational Procedure: Through the following steps, motor parameters for the Yaskawa Electric MINI-Minertia motor

Wedeward, Kevin

138

Read-out electronics for DC squid magnetic measurements  

DOE Patents [OSTI]

Read-out electronics for DC SQUID sensor systems, the read-out electronics incorporating low Johnson noise radio-frequency flux-locked loop circuitry and digital signal processing algorithms in order to improve upon the prior art by a factor of at least ten, thereby alleviating problems caused by magnetic interference when operating DC SQUID sensor systems in magnetically unshielded environments.

Ganther, Jr., Kenneth R. (Olathe, KS); Snapp, Lowell D. (Independence, MO)

2002-01-01T23:59:59.000Z

139

ELECTROMAGNETIC RADIATION FROM A STRONG DC ELECTRIC FIELD  

E-Print Network [OSTI]

ELECTROMAGNETIC RADIATION FROM A STRONG DC ELECTRIC FIELD Manuel G¨udel 1 and Donat G. Wentzel 2 1 accelerated by a strong dc electric field show not only very efficient generation of beam waves but also emission of o­mode radiation. We present a set of particle simulations for which we study the behavior

Guedel, Manuel

140

Dynamic microscopic theory of fusion using DC-TDHF  

SciTech Connect (OSTI)

The density-constrained time-dependent Hartree-Fock (DC-TDHF) theory is a fully microscopic approach for calculating heavy-ion interaction potentials and fusion cross sections below and above the fusion barrier. We discuss recent applications of DC-TDHF method to fusion of light and heavy systems.

Umar, A. S.; Oberacker, V. E.; Keser, R.; Maruhn, J. A.; Reinhard, P.-G. [Department of Physics and Astronomy, Vanderbilt University, Nashville, Tennessee 37235 (United States); RTE University, Science and Arts Faculty, Department of Physics, 53100, Rize (Turkey); Institut fuer Theoretische Physik, Goethe-Universitaet, D-60438 Frankfurt am Main (Germany); Institut fur Theoretische Physik, Universitat Erlangen, D-91054 Erlangen (Germany)

2012-10-20T23:59:59.000Z

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

An Economic Impact Analysis of DC Drinking Water Quality  

E-Print Network [OSTI]

An Economic Impact Analysis of DC Drinking Water Quality Annual Progress Report for FY 2005 In January 2004, District of Columbia residents learned the drinking water supplied by the D.C. Water immediately responded by forming the Interagency Task Force on Lead in Drinking Water (The Task Force

District of Columbia, University of the

142

Historical Material Analysis of DC745U Pressure Pads  

SciTech Connect (OSTI)

As part of the Enhance Surveillance mission, it is the goal to provide suitable lifetime assessment of stockpile materials. This report is an accumulation of historical publication on the DC745U material and their findings. It is the intention that the B61 LEP program uses this collection of data to further develop their understanding and potential areas of study. DC745U is a commercially available silicone elastomer consisting of dimethyl, methyl-phenyl, and methyl-vinyl siloxane repeat units. Originally, this material was manufactured by Dow Corning as Silastic{reg_sign} DC745U at their manufacturing facility in Kendallville, IN. Recently, Dow Corning shifted this material to the Xiameter{reg_sign} brand product line. Currently, DC745U is available through Xiameter{reg_sign} or Dow Corning's distributor R. D. Abbott Company. DC745U is cured using 0.5 wt% vinyl-specific peroxide curing agent known as Luperox 101 or Varox DBPH-50. This silicone elastomer is used in numerous parts, including two major components (outer pressure pads and aft cap support) in the W80 and as pressure pads on the B61. DC745U is a proprietary formulation, thus Dow Corning provides limited information on its composition and properties. Based on past experience with Dow Corning, DC745U is at risk of formulation changes without notification to the costumer. A formulation change for DC745U may have a significant impact because the network structure is a key variable in determining material properties. The purpose of this report is to provide an overview of historical DC745U studies and identify gaps that need to be addressed in future work. Some of the previous studies include the following: 1. Spectroscopic characterization of raw gum stock. 2. Spectroscopic, thermal, and mechanical studies on cured DC745U. 3. Nuclear Magnetic Resonance (NMR) and solvent swelling studies on DC745U with different crosslink densities. 4. NMR, solvent swelling, thermal, and mechanical studies on thermally aged DC745U. 5. NMR, solvent swelling, thermal, and mechanical studies on radiolytically aged DC745U. Each area is reviewed and further work is suggested to improve our understanding of DC745U for systems engineering, surveillance, aging assessments, and lifetime assessment.

Ortiz-Acosta, Denisse [Los Alamos National Laboratory

2012-07-30T23:59:59.000Z

143

Stabilization of unstable periodic orbits in dc drives  

E-Print Network [OSTI]

Electric drive using dc shunt motor or permanent magnet dc (PMDC) motor as prime mover exhibits bifurcation and chaos. The characteristics of dc shunt and PMDC motors are linear in nature. These motors are controlled by pulse width modulation (PWM) technique with the help of semiconductor switches. These switches are nonlinear element that introduces nonlinear characteristics in the drive. Any nonlinear system can exhibit bifurcation and chaos. dc shunt or PMDC drives show normal behavior with certain range of parameter values. It is also observed that these drive show chaos for significantly large ranges of parameter values. In this paper we present a method for controlling chaos applicable to dc shunt and PMDC drives. The results of numerical investigation are presented.

Krishnendu Chakrabarty; Urmila Kar

2014-02-22T23:59:59.000Z

144

Dissipative Cryogenic Filters with Zero DC Resistance  

SciTech Connect (OSTI)

The authors designed, implemented and tested cryogenic RF filters with zero DC resistance, based on wires with a superconducting core inside a resistive sheath. The superconducting core allows low frequency currents to pass with negligible dissipation. Signals above the cutoff frequency are dissipated in the resistive part due to their small skin depth. The filters consist of twisted wire pairs shielded with copper tape. Above approximately 1 GHz, the attenuation is exponential in {radical}{omega}, as typical for skin depth based RF filters. By using additional capacitors of 10 nF per line, an attenuation of at least 45 dB above 10 MHz can be obtained. Thus, one single filter stage kept at mixing chamber temperature in a dilution refrigerator is sufficient to attenuate room temperature black body radiation to levels corresponding to 10 mK above about 10 MHz.

Bluhm, Hendrik; Moler, Kathryn A.; /Stanford U., Appl. Phys. Dept

2008-04-22T23:59:59.000Z

145

DC, AC and advanced EV propulsion systems  

SciTech Connect (OSTI)

Battery development and liquid fuel availability and cost are still the pacing factors in wide scale electric vehicle introduction. Propulsion systems also require technical development, however, if electric vehicles are to be acceptable in the marketplace in competition against ICE vehicles. Eaton Corporation has undertaken a program designed to identify and investigate three broad types of propulsion systems in identical test vehicles on the same test track under conditions as similar as possible. Characteristics of dc, ac and advanced systems are compared to date, and projections of anticipated results and further work are provided. The compelling advantages of multiple mechanical ratios in EV propulsion systems are reviewed. An emerging, but less obvious, advantage is higher overall system efficiency.

O'Neil, W.

1983-08-01T23:59:59.000Z

146

AMERICAN JOURNAL OF HYPERTENSION | VOLUME 23 NUMBER 4 | 393-398 | apRiL 2010 393 original contributionsnature publishing group  

E-Print Network [OSTI]

AMERICAN JOURNAL OF HYPERTENSION | VOLUME 23 NUMBER 4 | 393-398 | apRiL 2010 393 original to be an inde- pendent predictor of all-cause and cardiovascular mortalities,1 especially in hypertensive events3 and of fatal stroke4 in hypertensive patients, an independent risk factor for recurrent acute

Konofagou, Elisa E.

147

Abstract --A systematic framework for reliability assessment and fault-tolerant design of multiphase dc-dc  

E-Print Network [OSTI]

reliability. Index Terms--Markov reliability modeling, maximum power point tracking, photovoltaics, switch1 Abstract -- A systematic framework for reliability assessment and fault-tolerant design of multiphase dc-dc converters deployed in photovoltaic applications is presented. System-level steady

Liberzon, Daniel

148

Annual Meeting of Energy Recovery Council, W hi DC D b 3 2011Washington DC, December 3. 2011  

E-Print Network [OSTI]

Annual Meeting of Energy Recovery Council, W hi DC D b 3 2011Washington DC, December 3. 2011 to the recyclers (e.g. metal smelters; secondary paper mills).(e.g. metal smelters; secondary paper mills). All, recovery (called WastetoEnergy; WTE) gy, , y ( gy; ) · All countries (and communities) who rely on WTE also

Columbia University

149

We Have a Winner - DC High School Regional Science Bowl Competition...  

Office of Environmental Management (EM)

We Have a Winner - DC High School Regional Science Bowl Competition Held Last Saturday We Have a Winner - DC High School Regional Science Bowl Competition Held Last Saturday...

150

H.C. DORLAND, N.J. BEUKES, J. GUTZMER, D.A.D. EVANS AND R.A. ARMSTRONG SOUTH AFRICAN JOURNAL OF GEOLOGY, 2006, VOLUME 109 PAGE 139-156  

E-Print Network [OSTI]

H.C. DORLAND, N.J. BEUKES, J. GUTZMER, D.A.D. EVANS AND R.A. ARMSTRONG SOUTH AFRICAN JOURNAL.evans@yale.edu R.A. Armstrong Research School of Earth Sciences, Australian National University, Canberra, Australia e-mail: Richard.Armstrong@anu.edu.au © 2006 March Geological Society of South Africa ABSTRACT

151

Implementing the DC Mode in Cosmological Simulations with Supercomoving Variables  

DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

As emphasized by previous studies, proper treatment of the density fluctuation on the fundamental scale of a cosmological simulation volume - the 'DC mode' - is critical for accurate modeling of spatial correlations on scales ~> 10% of simulation box size. We provide further illustration of the effects of the DC mode on the abundance of halos in small boxes and show that it is straightforward to incorporate this mode in cosmological codes that use the 'supercomoving' variables. The equations governing evolution of dark matter and baryons recast with these variables are particularly simple and include the expansion factor, and hence the effect of the DC mode, explicitly only in the Poisson equation.

Gnedin, Nickolay Y.; Kravtsov, Andrey V.; Rudd, Douglas H.

2011-06-02T23:59:59.000Z

152

Counterrotating brushless dc permanent magnet motor  

SciTech Connect (OSTI)

An brushless DC permanent magnet motor is provided for driving an autonomous underwater vehicle. In one embodiment, the motor comprises four substantially flat stators disposed in stacked relationship, with pairs of the stators being axially spaced and each of the stators comprising a tape-wound stator coil; and a first and second substantially flat rotors disposed between the spaced pairs of stators. Each of the rotors includes an annular array of permanent magnets embedded therein. A first shaft is connected to the first rotor and a second, concentric shaft is connected to the second rotor, and drive unit causes rotation of the two shafts in opposite directions. The second shaft comprises a hollow tube having a central bore therein in which the first shaft is disposed. Two different sets of bearings support the first and second shAfts. In another embodiment, the motor comprises two ironless stators and pairs and rotors mounted no opposite sides of the stators and driven by counterrotating shafts.

Hawsey, R.A.; Bailey, J.M.

1990-12-31T23:59:59.000Z

153

Counterrotating brushless dc permanent magnet motor  

SciTech Connect (OSTI)

An brushless DC permanent magnet motor is provided for driving an autonomous underwater vehicle. In one embodiment, the motor comprises four substantially flat stators disposed in stacked relationship, with pairs of the stators being axially spaced and each of the stators comprising a tape-wound stator coil; and a first and second substantially flat rotors disposed between the spaced pairs of stators. Each of the rotors includes an annular array of permanent magnets embedded therein. A first shaft is connected to the first rotor and a second, concentric shaft is connected to the second rotor, and drive unit causes rotation of the two shafts in opposite directions. The second shaft comprises a hollow tube having a central bore therein in which the first shaft is disposed. Two different sets of bearings support the first and second shAfts. In another embodiment, the motor comprises two ironless stators and pairs and rotors mounted no opposite sides of the stators and driven by counterrotating shafts.

Hawsey, R.A.; Bailey, J.M.

1990-01-01T23:59:59.000Z

154

Radiofrequency amplifier based on a dc superconducting quantum interference device  

DOE Patents [OSTI]

A low noise radiofrequency amplifier (10), using a dc SQUID (superconducting quantum interference device) as the input amplifying element. The dc SQUID (11) and an input coil (12) are maintained at superconductivity temperatures in a superconducting shield (13), with the input coil (12) inductively coupled to the superconducting ring (17) of the dc SQUID (11). A radiofrequency signal from outside the shield (13) is applied to the input coil (12), and an amplified radiofrequency signal is developed across the dc SQUID ring (17) and transmitted to exteriorly of the shield (13). A power gain of 19.5.+-.0.5 dB has been achieved with a noise temperature of 1.0.+-.0.4 K. at a frequency of 100 MHz.

Hilbert, Claude (Berkeley, CA); Martinis, John M. (Berkeley, CA); Clarke, John (Berkeley, CA)

1986-01-01T23:59:59.000Z

155

Radiofrequency amplifier based on a dc superconducting quantum interference device  

DOE Patents [OSTI]

A low noise radiofrequency amplifer, using a dc SQUID (superconducting quantum interference device) as the input amplifying element. The dc SQUID and an input coil are maintained at superconductivity temperatures in a superconducting shield, with the input coil inductively coupled to the superconducting ring of the dc SQUID. A radiofrequency signal from outside the shield is applied to the input coil, and an amplified radiofrequency signal is developed across the dc SQUID ring and transmitted to exteriorly of the shield. A power gain of 19.5 +- 0.5 dB has been achieved with a noise temperature of 1.0 +- 0.4 K at a frequency of 100 MHz.

Hilbert, C.; Martinis, J.M.; Clarke, J.

1984-04-27T23:59:59.000Z

156

Washington, D.C. and Indiana: Allison Hybrid Technology Achieves...  

Broader source: Energy.gov (indexed) [DOE]

D.C. region, and demand continues to grow worldwide. The Washington Metropolitan Area Transit Authority (WMATA), with a total fleet of 1,480 buses, has more than 600 of them...

157

Modeling Microinverters and DC Power Optimizers in PVWatts  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and DC Power Optimizers in PVWatts Sara MacAlpine and Chris Deline National Renewable Energy Laboratory Technical Report NRELTP-5J00-63463 February 2015 NREL is a national...

158

Plasmacytoid dendritic cell-specific receptor ILT7-Fc epsilon RI gamma inhibits Toll-like receptor-induced interferon production  

E-Print Network [OSTI]

ILT3 Relative Expression EE pDC DAP 10 DAP 12 FceRly CD79Aby a horizontal bar. PDC-SPECIFIC ILT7-FcsRl7 INHIBITS TLRreceptor complex. ILT7 is a pDC-specific receptor To confirm

2006-01-01T23:59:59.000Z

159

Plasmacytoid dendritic cell-specific receptor ILT7-Fc epsilonRI gamma inhibits Toll-like receptor-induced interferon production.  

E-Print Network [OSTI]

ILT3 B Relative Expression pDC DAP 10 DAP 12 FceRly CD79Aby a horizontal bar. PDC-SPECIFIC ILT7-FcsRl7 INHIBITS TLRreceptor complex. ILT7 is a pDC-specific receptor To confirm

2006-01-01T23:59:59.000Z

160

Analysis of a transformer-less, multi-level DC-DC converter for HVDC operation  

SciTech Connect (OSTI)

HVDC systems require DC step up and DC step down units. The traditional approach is the application of twelve-pulse thyristor bridges with transformers. The developments of fast switching IGBT devices permit the development of transformer-less, multi-level converters. A multi-level circuit was suggested by Limpaecher. This paper presents a detailed simulation of the proposed circuit together with the analysis of its performance. The converter consists of a set of capacitors, air core inductors and solid state switches arranged in a ladder network. In the step-up mode, the closing of solid state switches resonantly charges the capacitors in parallel through an air-cored inductor. Then solid state switches resonantly charges the capacitors in parallel through an air-cored inductor. Then solid state switches connect the capacitors in series and discharge them through an air-core inductor to the load. In the step-down mode the capacitors are charged in series and discharged in parallel. The circuit has three modes of operation in each cycle: charge, inversion, and discharge. The circuit operation is analyzed in each mode using SPICE simulations. The selection of the components is discussed and output voltage regulation is analyzed. The results show that the proposed circuit promises significant reduction of losses, because of the zero current switching. The investment cost is reduced because of the elimination of transformers.

Karady, G.G.; Devarajan, S. [Arizona State Univ., Tempe, AZ (United States)

1998-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

A Low-Cost Soft-Switched DC/DC Converter for Solid-Oxide Fuel Cells  

SciTech Connect (OSTI)

A highly efficient DC to DC converter has been developed for low-voltage high-current solid oxide fuel cells. The newly developed 'V6' converter resembles what has been done in internal combustion engine that split into multiple cylinders to increase the output capacity without having to increase individual cell size and to smooth out the torque with interleaving operation. The development was started with topology overview to ensure that all the DC to DC converter circuits were included in the study. Efficiency models for different circuit topologies were established, and computer simulations were performed to determine the best candidate converter circuit. Through design optimization including topology selection, device selection, magnetic component design, thermal design, and digital controller design, a bench prototype rated 5-kW, with 20 to 50V input and 200/400V output was fabricated and tested. Efficiency goal of 97% was proven achievable through hardware experiment. This DC to DC converter was then modified in the later stage to converter 35 to 63 V input and 13.8 V output for automotive charging applications. The complete prototype was tested at Delphi with their solid oxide fuel cell test stand to verify the performance of the modified DC to DC converter. The output was tested up to 3-kW level, and the efficiency exceeded 97.5%. Multiple-phase interleaving operation design was proved to be reliable and ripple free at the output, which is desirable for the battery charging. Overall this is a very successful collaboration project between the SECA Core Technology Team and Industrial Team.

Jason Lai

2009-03-03T23:59:59.000Z

162

Analysis and design of a saturable reactor assisted soft-switching full-bridge dc-dc converter  

SciTech Connect (OSTI)

Analysis and design considerations for a saturable reactor assisted soft-switching full-bridge dc-dc converter are presented. The converter has advantages such as low switching losses with no substantial increase in conduction losses, wide load range, and constant frequency operation. To show how to utilize the analysis results, a 350-W, 500-kHz converter is chosen as a design example. The results are verified experimentally on a prototype converter.

Hamada, Satoshi (Sansha Electric Manufacturing Co., Ltd., Osaka (Japan)); Nakaoka, Mutsuo (Kobe Univ. (Japan). Dept. of Electrical and Electronics Engineering)

1994-05-01T23:59:59.000Z

163

A High Efficiency DC-DC Converter Topology Suitable for Distributed Large Commercial and Utility Scale PV Systems  

SciTech Connect (OSTI)

In this paper a DC-DC power converter for distributed photovoltaic plant architectures is presented. The proposed converter has the advantages of simplicity, high efficiency, and low cost. High efficiency is achieved by having a portion of the input PV power directly fed forward to the output without being processed by the converter. The operation of this converter also allows for a simplified maximum power point tracker design using fewer measurements

Mohammed S. Agamy; Maja Harfman-Todorovic; Ahmed Elasser; Robert L. Steigerwald; Juan A. Sabate; Song Chi; Adam J. McCann; Li Zhang; Frank Mueller

2012-09-01T23:59:59.000Z

164

Reid Rosnick/DC/USEPA/US 10/25/2012 11:54 AM  

E-Print Network [OSTI]

EPA-694 Reid Rosnick/DC/USEPA/US 10/25/2012 11:54 AM To Philip Egidi cc bcc Subject Re: Subpart W Pennsylvania Ave., NW Washington, DC 20460 202.343.9563 rosnick.reid@epa.gov -----Philip Egidi/DC/USEPA/US wrote: ----- To: Reid Rosnick/DC/USEPA/US@EPA From: Philip Egidi/DC/USEPA/US Date: 10/25/2012 11:41AM Cc

165

DESIGN OF A DC/RF PHOTOELECTRON GUN.  

SciTech Connect (OSTI)

An integrated dc/rf photoelectron gun produces a low-emittance beam by first rapidly accelerating electrons at a high gradient during a short ({approx}1 ns), high-voltage pulse, and then injecting the electrons into an rf cavity for subsequent acceleration. Simulations show that significant improvement of the emittance appears when a high field ({approx} 0.5-1 GV/m) is applied to the cathode surface. An adjustable dc gap ({le} 1 mm) which can be integrated with an rf cavity is designed for initial testing at the Injector Test Stand at Argonne National Laboratory using an existing 70-kV pulse generator. Plans for additional experiments of an integrated dc/rf gun with a 250-kV pulse generator are being made.

YU,D.NEWSHAM,Y.SMIRONOV,A.YU,J.SMEDLEY,J.SRINIVASAN RAU,T.LEWELLEN,J.ZHOLENTS,A.

2003-05-12T23:59:59.000Z

166

Active dc filter for HVDC system--A test installation in the Konti-Skan DC link at Lindome converter station  

SciTech Connect (OSTI)

The purpose of introducing active dc filters is to meet the more and more stringent requirement from power utilities on limiting telephone interference caused by harmonic currents from HVdc transmission lines, without unnecessarily increasing the cost of HVdc stations. An active dc filter installed in the Konti-Skan HVdc link is described. The active dc filter is connected at the bottom of an existing passive dc filter at the Lindome station. The active dc filter includes optic harmonic current measuring unit, control system, protection and supervision system, PWM power amplifier, high-frequency transformer, surge arrester, and coupling apparatuses. The active dc filter has small physical size and occupies small ground area. The performance of the active dc filter for eliminating the disturbing harmonics is excellent. To achieve comparable results by passive filters would require something like ten times more high voltage equipment.

Zhang, Wenyan; Asplund, G. (ABB Power Systems, Ludvika (Sweden). HVDC Division); Aberg, A. (ABB Corporate Research, Lund (Sweden). Dept. of Man-Machine Communication); Jonsson, U. (Svenska Kraftnaet, Vaellingby (Sweden)); Loeoef, O. (Vattenfall AB, Trollhaettan (Sweden). Region Vaestsverige)

1993-07-01T23:59:59.000Z

167

Application of direct pulsewidth modulation scheme to AC-DC converters: - a way to reduce ripple  

E-Print Network [OSTI]

Modulation (ISPWM), 4 Direct Pulsewidth Modulation (DPWM). 15 5 Single Phase Half Controlled PWM ac-dc Converter . 6 Single Phase Full controlled PWM ac-dc Converter . 18 18 7 Simulation of SPWM ac-dc Converter. 20 8 Output Voltage Spectra of SPWM ac... 30 Balanced Three Phase Inputs 31 Output Voltage of A Three Phase Full Controlled ac-dc SPWM Converter. 42 32 Output Voltage of A Three Phase Full Controlled ac-dc EPWM Con- verter 33 Output Voltage of A Three Phase Full Controlled ac-dc ISPWM Con...

Zhang, Yuemin

1993-01-01T23:59:59.000Z

168

Graphite electrode DC arc furnace. Innovative technology summary report  

SciTech Connect (OSTI)

The Graphite Electrode DC Arc Furnace (DC Arc) is a high-temperature thermal process, which has been adapted from a commercial technology, for the treatment of mixed waste. A DC Arc Furnace heats waste to a temperature such that the waste is converted into a molten form that cools into a stable glassy and/or crystalline waste form. Hazardous organics are destroyed through combustion or pyrolysis during the process and the majority of the hazardous metals and radioactive components are incorporated in the molten phase. The DC Arc Furnace chamber temperature is approximately 593--704 C and melt temperatures are as high as 1,500 C. The DC Arc system has an air pollution control system (APCS) to remove particulate and volatiles from the offgas. The advantage of the DC Arc is that it is a single, high-temperature thermal process that minimizes the need for multiple treatment systems and for extensive sorting/segregating of large volumes of waste. The DC Arc has the potential to treat a wide range of wastes, minimize the need for sorting, reduce the final waste volumes, produce a leach resistant waste form, and destroy organic contaminants. Although the DC arc plasma furnace exhibits great promise for treating the types of mixed waste that are commonly present at many DOE sites, several data and technology deficiencies were identified by the Mixed Waste Focus Area (MWFA) regarding this thermal waste processing technique. The technology deficiencies that have been addressed by the current studies include: establishing the partitioning behavior of radionuclides, surrogates, and hazardous metals among the product streams (metal, slag, and offgas) as a function of operating parameters, including melt temperature, plenum atmosphere, organic loading, chloride concentration, and particle size; demonstrating the efficacy of waste product removal systems for slag and metal phases; determining component durability through test runs of extended duration, evaluating the effect of feed composition variations on process operating conditions and slag product performance; and collecting mass balance and operating data to support equipment and instrument design.

NONE

1999-05-01T23:59:59.000Z

169

High voltage dc--dc converter with dynamic voltage regulation and decoupling during load-generated arcs  

DOE Patents [OSTI]

A high-power power supply produces a controllable, constant high voltage output under varying and arcing loads. The power supply includes a voltage regulator, an inductor, an inverter for producing a high frequency square wave current of alternating polarity, an improved inverter voltage clamping circuit, a step up transformer, an output rectifier for producing a dc voltage at the output of each module, and a current sensor for sensing output current. The power supply also provides dynamic response to varying loads by controlling the voltage regulator duty cycle and circuitry is provided for sensing incipient arc currents at the output of the power supply to simultaneously decouple the power supply circuitry from the arcing load. The power supply includes a plurality of discrete switching type dc--dc converter modules. 5 Figs.

Shimer, D.W.; Lange, A.C.

1995-05-23T23:59:59.000Z

170

High voltage dc-dc converter with dynamic voltage regulation and decoupling during load-generated arcs  

DOE Patents [OSTI]

A high-power power supply produces a controllable, constant high voltage output under varying and arcing loads. The power supply includes a voltage regulator, an inductor, an inverter for producing a high frequency square wave current of alternating polarity, an improved inverter voltage clamping circuit, a step up transformer, an output rectifier for producing a dc voltage at the output of each module, and a current sensor for sensing output current. The power supply also provides dynamic response to varying loads by controlling the voltage regulator duty cycle and circuitry is provided for sensing incipient arc currents at the output of the power supply to simultaneously decouple the power supply circuitry from the arcing load. The power supply includes a plurality of discrete switching type dc--dc converter modules.

Shimer, Daniel W. (Danville, CA); Lange, Arnold C. (Livermore, CA)

1995-01-01T23:59:59.000Z

171

Solar Decathlon at Home in the D.C. Community | Department of...  

Broader source: Energy.gov (indexed) [DOE]

at Home in the D.C. Community Solar Decathlon at Home in the D.C. Community December 4, 2012 - 4:25pm Addthis One of the new homeowners, Layika Culley, and her family cut the...

172

Analysis of Fe Nanoparticles Using XPS Measurements Under D.C...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Fe Nanoparticles Using XPS Measurements Under D.C. or Pulsed-Voltage Bias. Analysis of Fe Nanoparticles Using XPS Measurements Under D.C. or Pulsed-Voltage Bias. Abstract: The...

173

Energy Secretary Moniz's Remarks at CSIS in Washington D.C. on...  

Office of Environmental Management (EM)

Energy Secretary Moniz's Remarks at CSIS in Washington D.C. on Energy Security 40 Years after the Embargo - As Delivered Energy Secretary Moniz's Remarks at CSIS in Washington D.C....

174

D.C. Community Comes Together in the Name of Sustainability,...  

Broader source: Energy.gov (indexed) [DOE]

D.C. Community Comes Together in the Name of Sustainability, Affordability D.C. Community Comes Together in the Name of Sustainability, Affordability July 1, 2011 - 1:02pm Addthis...

175

Train the Teacher - Energy Workshops for DC-area Elementary School...  

Broader source: Energy.gov (indexed) [DOE]

Train the Teacher - Energy Workshops for DC-area Elementary School Teachers Train the Teacher - Energy Workshops for DC-area Elementary School Teachers May 2, 2014 1:00PM to 4:15PM...

176

E-Print Network 3.0 - average current dc Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

tronicsConfrenceAPC 92), Boston,February23-27,pp. 731-7j,. 1;2. A Resonant DC-DC Transformer Summary: State Operation. The steady state voltage and current waveforms when the...

177

Q&A: Kristen Psaki of WeatherizeDC | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Q&A: Kristen Psaki of WeatherizeDC April 15, 2010 - 3:45pm Addthis Roughly 20 percent of carbon emissions come from inefficient homes. The DC Project says it has found a way to...

178

Hybrid Multilevel Inverter with Single DC Haiwen Liu1  

E-Print Network [OSTI]

Hybrid Multilevel Inverter with Single DC Source Haiwen Liu1 , Leon M. Tolbert1, 2 , Burak Ozpineci Knoxville, TN 37932 3. Parker-Hannifin Corp. Olive Branch, MI 38654 Abstract- A hybrid multilevel inverter inverter (one leg for each phase) and H-bridge in series with each inverter leg. The inverter can be used

Tolbert, Leon M.

179

DC Optimal Power Flow: Uniqueness and Chee Wei Tan  

E-Print Network [OSTI]

and are computationally fast for practical smart power grids. I. BACKGROUND The Optimal Power Flow (OPF) problem network. The DC-OPF can be practically important in a smart grid, where there are renewables, e.g., solar implications on how algorithms can be designed to solve the OPF in a smart grid. Different from prior work

Tan, Chee Wei

180

Natural Gas Pipeline Leaks Across Washington, DC Robert B. Jackson,,,  

E-Print Network [OSTI]

Natural Gas Pipeline Leaks Across Washington, DC Robert B. Jackson,,, * Adrian Down, Nathan G increased in recent decades, but incidents involving natural gas pipelines still cause an average of 17 fatalities and $133 M in property damage annually. Natural gas leaks are also the largest anthropogenic

Jackson, Robert B.

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

D.C. Water Resources Research Institute Annual Technical Report  

E-Print Network [OSTI]

projects that address the three components of integrated urban water system: storm water runoff and sewer developing and maintaining new environmental quality testing and modeling tools to advance water researchD.C. Water Resources Research Institute Annual Technical Report FY 2013 D.C. Water Resources

182

Electrostatic coalescence system with independent AC and DC hydrophilic electrodes  

DOE Patents [OSTI]

An improved electrostatic coalescence system is provided in which independent AC and DC hydrophilic electrodes are employed to provide more complete dehydration of an oil emulsion. The AC field is produced between an AC electrode array and the water-oil interface wherein the AC electrode array is positioned parallel to the interface which acts as a grounded electrode. The emulsion is introduced into the AC field in an evenly distributed manner at the interface. The AC field promotes drop-drop and drop-interface coalescence of the water phase in the entering emulsion. The continuous oil phase passes upward through the perforated AC electrode array and enters a strong DC field produced between closely spaced DC electrodes in which small dispersed droplets of water entrained in the continuous phase are removed primarily by collection at hydrophilic DC electrodes. Large droplets of water collected by the electrodes migrate downward through the AC electrode array to the interface. All phase separation mechanisms are utilized to accomplish more complete phase separation.

Hovarongkura, A. David (Arlington, VA); Henry, Jr., Joseph D. (Morgantown, WV)

1981-01-01T23:59:59.000Z

183

High Voltage DC Transmission 1.0 Introduction  

E-Print Network [OSTI]

1 High Voltage DC Transmission 1.0 Introduction HVDC has been applied in electric power systems for many years now. Figure 1 illustrates worldwide many of the HVDC applications [1]. Fig. 1 ABB provides a webpage which summarizes HVDC projects by type and capacity or by commissioning year [2]. Wikipedia [3

McCalley, James D.

184

High Voltage DC Transmission 2 1.0 Introduction  

E-Print Network [OSTI]

1 High Voltage DC Transmission 2 1.0 Introduction Interconnecting HVDC within an AC system requires on use of switching devices collectively referred to in the HVDC community as valves. Valves may be non. Fig. 1 There have been three types of devices for implementing HVDC converter circuits: mercury

McCalley, James D.

185

Electromagnetic Coupling in a dc Motor and Tachometer Assembly  

E-Print Network [OSTI]

-pole permanent magnet stator devices. A shaft of finite stiffness connects the tachometer and motor armatures machines. The experimental test setup consists of an integrated permanent magnet dc motor-tachometer unit-tachometer shaft or a flexible mechanical coupling, this exercise in servo-control design becomes quite challenging

Awtar, Shorya

186

Building Scale DC Microgrids Chris Marnay, Steven Lanzisera, Michael Stadler, and Judy Lai  

E-Print Network [OSTI]

of building loads are either native DC, such as electronics and compact fluorescent and light emitting diode

187

A Decentralized Protection Scheme for Converters Utilizing a DC-link Inductor  

E-Print Network [OSTI]

- as in HVDC transmission for example - as well as in DC-links for high-power current source inverters

Lipo, Thomas

188

Interviews in Washington, DC for Albert Einstein Fellowship Semi-Finalists  

Broader source: Energy.gov [DOE]

Selected semi-finalists in the Albert Einstein Distinguished Educator Fellowship are invited to DC for interviews.

189

Control of a Fuel-Cell Powered DC Electric Vehicle Motor  

E-Print Network [OSTI]

Control of a Fuel-Cell Powered DC Electric Vehicle Motor Federico Zenith Sigurd Skogestad of a Fuel-Cell Powered DC Electric Vehicle Motor #12;3 Currently Available Models and Control Strategies Skogestad, Control of a Fuel-Cell Powered DC Electric Vehicle Motor #12;3 Currently Available Models

Skogestad, Sigurd

190

November 2002 15th TOFE, Washington, D.C. 1 Thermal Behavior and Operating  

E-Print Network [OSTI]

November 2002 15th TOFE, Washington, D.C. 1 Thermal Behavior and Operating Requirements of IFE Washington, D.C. November 2002 #12;November 2002 15th TOFE, Washington, D.C. 2 Abstract During injection the thermal behavior of the target under such conditions and explores possible ways of extending the target

Raffray, A. René

191

On the optimization of a dc arcjet diamond chemical vapor deposition reactor  

E-Print Network [OSTI]

On the optimization of a dc arcjet diamond chemical vapor deposition reactor S. W. Reevea) and W. A precursor in our dc arcjet reactor.1 Based on conclusions drawn from that work, an optimization strategy diamond film growth in a dc arcjet chemical vapor deposition reactor has been developed. Introducing

Dandy, David

192

Recovery Act: Integrated DC-DC Conversion for Energy-Efficient Multicore Processors  

SciTech Connect (OSTI)

In this project, we have developed the use of thin-film magnetic materials to improve in energy efficiency of digital computing applications by enabling integrated dc-dc power conversion and management with on-chip power inductors. Integrated voltage regulators also enables fine-grained power management, by providing dynamic scaling of the supply voltage in concert with the clock frequency of synchronous logic to throttle power consumption at periods of low computational demand. The voltage converter generates lower output voltages during periods of low computational performance requirements and higher output voltages during periods of high computational performance requirements. Implementation of integrated power conversion requires high-capacity energy storage devices, which are generally not available in traditional semiconductor processes. We achieve this with integration of thin-film magnetic materials into a conventional complementary metal-oxide-semiconductor (CMOS) process for high-quality on-chip power inductors. This project includes a body of work conducted to develop integrated switch-mode voltage regulators with thin-film magnetic power inductors. Soft-magnetic materials and inductor topologies are selected and optimized, with intent to maximize efficiency and current density of the integrated regulators. A custom integrated circuit (IC) is designed and fabricated in 45-nm CMOS silicon-on-insulator (SOI) to provide the control system and power-train necessary to drive the power inductors, in addition to providing a digital load for the converter. A silicon interposer is designed and fabricated in collaboration with IBM Research to integrate custom power inductors by chip stacking with the 45-nm CMOS integrated circuit, enabling power conversion with current density greater than 10A/mm2. The concepts and designs developed from this work enable significant improvements in performance-per-watt of future microprocessors in servers, desktops, and mobile devices. These new approaches to scaled voltage regulation for computing devices also promise significant impact on electricity consumption in the United States and abroad by improving the efficiency of all computational platforms. In 2006, servers and datacenters in the United States consumed an estimated 61 billion kWh or about 1.5% of the nation's total energy consumption. Federal Government servers and data centers alone accounted for about 10 billion kWh, for a total annual energy cost of about $450 million. Based upon market growth and efficiency trends, estimates place current server and datacenter power consumption at nearly 85 billion kWh in the US and at almost 280 billion kWh worldwide. Similar estimates place national desktop, mobile and portable computing at 80 billion kWh combined. While national electricity utilization for computation amounts to only 4% of current usage, it is growing at a rate of about 10% a year with volume servers representing one of the largest growth segments due to the increasing utilization of cloud-based services. The percentage of power that is consumed by the processor in a server varies but can be as much as 30% of the total power utilization, with an additional 50% associated with heat removal. The approaches considered here should allow energy efficiency gains as high as 30% in processors for all computing platforms, from high-end servers to smart phones, resulting in a direct annual energy savings of almost 15 billion kWh nationally, and 50 billion kWh globally. The work developed here is being commercialized by the start-up venture, Ferric Semiconductor, which has already secured two Phase I SBIR grants to bring these technologies to the marketplace.

Shepard, Kenneth L

2013-03-31T23:59:59.000Z

193

Multilevel cascade voltage source inverter with seperate DC sources  

DOE Patents [OSTI]

A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

Peng, Fang Zheng (Oak Ridge, TN); Lai, Jih-Sheng (Knoxville, TN)

1997-01-01T23:59:59.000Z

194

Multilevel cascade voltage source inverter with separate DC sources  

DOE Patents [OSTI]

A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations. 15 figs.

Peng, F.Z.; Lai, J.S.

1997-06-24T23:59:59.000Z

195

Multilevel cascade voltage source inverter with seperate DC sources  

DOE Patents [OSTI]

A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

Peng, Fang Zheng (Knoxville, TN); Lai, Jih-Sheng (Blacksburg, VA)

2002-01-01T23:59:59.000Z

196

Basic DC Meter Design ECE 2100 Circuit Analysis Laboratory  

E-Print Network [OSTI]

Basic DC Meter Design ECE 2100 Circuit Analysis Laboratory updated 8 January 2008 Pre-Laboratory Assignment 1. Design an ammeter with full scale current IFS equal to 5 mA using a meter movement rated at 0.5 mA and 100 mV. 2. Design a voltmeter with a full scale voltage VFS equal to 10 V using the meter

Miller, Damon A.

197

Report on Non-Contact DC Electric Field Sensors  

SciTech Connect (OSTI)

This document reports on methods used to measure DC electrostatic fields in the range of 100 to 4000 V/m using a non-contact method. The project for which this report is written requires this capability. Non-contact measurements of DC fields is complicated by the effect of the accumulation of random space-charges near the sensors which interfere with the measurement of the field-of-interest and consequently, many forms of field measurements are either limited to AC measurements or use oscillating devices to create pseudo-AC fields. The intent of this document is to report on methods discussed in the literature for non-contact measurement of DC fields. Electric field meters report either the electric field expressed in volts per distance or the voltage measured with respect to a ground reference. Common commercial applications for measuring static (DC) electric fields include measurement of surface charge on materials near electronic equipment to prevent arcing which can destroy sensitive electronic components, measurement of the potential for lightning to strike buildings or other exposed assets, measurement of the electric fields under power lines to investigate potential health risks from exposure to EM fields and measurement of fields emanating from the brain for brain diagnostic purposes. Companies that make electric field sensors include Trek (Medina, NY), MKS Instruments, Boltek, Campbell Systems, Mission Instruments, Monroe Electronics, AlphaLab, Inc. and others. In addition to commercial vendors, there are research activities continuing in the MEMS and optical arenas to make compact devices using the principles applied to the larger commercial sensors.

Miles, R; Bond, T; Meyer, G

2009-06-16T23:59:59.000Z

198

!#"%$'&)(02130546708913@A4B0DC Scott Schaefer, Joe Warren  

E-Print Network [OSTI]

¢¡¤£¦¥¨§©©¡ !#"%$'&)(¤02130546708913£@¡A4B0DC Scott Schaefer, Joe Warren Rice UniversityE: for each edge in the grid that contains a sign change (i.e.; the vertices on its end- points these methods primal methods. i e-mail: p sschaefe,jwarrenq @rice.edu Figure 1: A sphere contoured using

Warren, Joe

199

The Use of DC Glow Discharges as Undergraduate Educational Tools  

SciTech Connect (OSTI)

Plasmas have a beguiling way of getting students excited and interested in physics. We argue that plasmas can and should be incorporated into the undergraduate curriculum as both demonstrations and advanced investigations of electromagnetism and quantum effects. Our device, based on a direct current (DC) glow discharge tube, allows for a number of experiments into topics such as electrical breakdown, spectroscopy, magnetism, and electron temperature.

Stephanie A. Wissel and Andrew Zwicker, Jerry Ross, and Sophia Gershman

2012-10-09T23:59:59.000Z

200

Disc rotors with permanent magnets for brushless dc motor  

SciTech Connect (OSTI)

This patent describes a brushless dc permanent magnet motor for driving an autonomous underwater vehicle. It comprises first and second substantially flat, generally cylindrical stators disposed in side by side relation; a first substantially flat, generally cylindrical rotor; a first shaft connected to the first rotor and a second, concentric shaft connected to the second rotor; and means for providing rotation of the first and second shafts in opposite directions.

Hawsey, R.A.; Bailery, J.M.

1992-05-26T23:59:59.000Z

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

DC Resistivity Survey (Pole-Dipole Array) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentratingRenewable Solutions LLC JumpCrow Lake Wind JumpCuttings AnalysisDC Resistivity

202

Risk-Informed Monitoring, Verification and Accounting (RI-MVA). An NRAP White Paper Documenting Methods and a Demonstration Model for Risk-Informed MVA System Design and Operations in Geologic Carbon Sequestration  

SciTech Connect (OSTI)

This white paper accompanies a demonstration model that implements methods for the risk-informed design of monitoring, verification and accounting (RI-MVA) systems in geologic carbon sequestration projects. The intent is that this model will ultimately be integrated with, or interfaced with, the National Risk Assessment Partnership (NRAP) integrated assessment model (IAM). The RI-MVA methods described here apply optimization techniques in the analytical environment of NRAP risk profiles to allow systematic identification and comparison of the risk and cost attributes of MVA design options.

Unwin, Stephen D.; Sadovsky, Artyom; Sullivan, E. C.; Anderson, Richard M.

2011-09-30T23:59:59.000Z

203

Summary of electric vehicle dc motor-controller tests  

SciTech Connect (OSTI)

Available performance data for production motors are usually of marginal value to the electric vehicle designer. To provide at least a partial remedy to this situation, tests of typical dc propulsion motors and controllers were conducted as part of the DOE Electric Vehicle Program. The objectives of this program were to evaluate the differences in the performance of dc motors when operating with chopper-type controllers and when operating on direct current; and to gain an understanding of the interactions between the motor and the controller which cause these differences. Toward this end, motor-controller tests performed by the NASA Lewis Research Center provided some of the first published data that quantified motor efficiency variations for both ripple-free (straight dc) and chopper modes of operation. Test and analysis work at the University of Pittsburgh explored motor-controller relationships in greater depth. And to provide additional data, 3E Vehicles tested two small motors, both on a dynamometer and in a vehicle, and the Eaton Corporation tested larger motors, using sophisticated instrumentation and digital processing techniques. All the motors tested were direct-current types. Of the separately excited types, seven were series wound and two were shunt wound. One self-excited permanent magnet type was also tested. Four of the series wound motors used brush shifting to obtain good commutation. In almost all cases, controller limitations constrained the test envelope so that the full capability of the motors could not be explored.

McBrien, E F; Tryon, H B

1982-09-01T23:59:59.000Z

204

Optimal Demand Response in DC Distribution Networks Hamed Mohsenian-Rad, Member, IEEE and Ali Davoudi, Member, IEEE  

E-Print Network [OSTI]

such as photovoltaic systems are essentially DC sources. Battery storage devices are also easier H. Mohsenian

Mohsenian-Rad, Hamed

205

Multiphase soft switched DC/DC converter and active control technique for fuel cell ripple current elimination  

DOE Patents [OSTI]

DC/DC converter has a transformer having primary coils connected to an input side and secondary coils connected to an output side. Each primary coil connects a full-bridge circuit comprising two switches on two legs, the primary coil being connected between the switches on each leg, each full-bridge circuit being connected in parallel wherein each leg is disposed parallel to one another, and the secondary coils connected to a rectifying circuit. An outer loop control circuit that reduces ripple in a voltage reference has a first resistor connected in series with a second resistor connected in series with a first capacitor which are connected in parallel with a second capacitor. An inner loop control circuit that reduces ripple in a current reference has a third resistor connected in series with a fourth resistor connected in series with a third capacitor which are connected in parallel with a fourth capacitor.

Lai, Jih-Sheng (Blacksburg, VA); Liu, Changrong (Sunnyvale, CA); Ridenour, Amy (Salem, VA)

2009-04-14T23:59:59.000Z

206

Communication accepte: Healthy Buildings/IAQ'97 Washington DC, septembre 1997Communication accepte: Healthy Buildings/IAQ'97 Washington DC, septembre 1997 DISCRIMINATION OF VOLATILE ORGANIC COMPOUNDS  

E-Print Network [OSTI]

Communication acceptée: Healthy Buildings/IAQ'97 Washington DC, septembre 1997Communication acceptée: Healthy Buildings/IAQ'97 Washington DC, septembre 1997 DISCRIMINATION OF VOLATILE ORGANIC manuscript, published in "4th International Conference on Healthy Buildings'97, Washington : United States

Paris-Sud XI, Université de

207

Bryant University | 1150 Douglas Pike | Smithfield, RI 02917 | (877) 353-5667 | www.bryant.edu b r y a n t u n i v e r s i t y  

E-Print Network [OSTI]

Bryant University | 1150 Douglas Pike | Smithfield, RI 02917 | (877) 353-5667 | www.bryant.edu b r, if available. Please complete all that apply. I/we have provided for a bequest to Bryant University in the amount of $ ­ Or ­ My/Our current estate plan states that Bryant University will receive percent of my

Blais, Brian

208

Mv. Space Res. Vol. 13, Mo. 9, ~. (9)331--(9)339, 1993 0273--1177/93$24.00 Punted in (Ireat Britain. All ri&its reserved. 1993COSPAR  

E-Print Network [OSTI]

. All ri&its reserved. 1993COSPAR NON-THERMAL PARTICLES IN THE INTERPLANETARY MEDIUM Donald V. Reames ubiquitous presence of highly non- thermal particles in collisionless plasmas throughout the heliosphere and bow shocks, in traveling interplanetary shocks, in the interaction region between fast and slow solar

Reames, Donald V.

209

The dc modeling program (DCMP): Version 2. 0  

SciTech Connect (OSTI)

In this project one of the main objectives was the refinement of tools for the study of HVDC systems. The original software was prepared in project RP1964-2 (EL-4365) as power flow and stability program models for HVDC systems. In this project new modeling capabilities were added to both the power flow and stability models. Additionally, the HVDC specific model capabilities were integrated into a new program, termed the Standalone program, for use in the development and testing of HVDC models. This manual provides technical background for programmers and those interested in understanding, augmenting or transporting the dc models.

Chapman, D.G. (Manitoba HVDC Research Centre, Winnipeg, MB (Canada))

1990-08-01T23:59:59.000Z

210

Positron lifetime spectrometer using a DC positron beam  

DOE Patents [OSTI]

An entrance grid is positioned in the incident beam path of a DC beam positron lifetime spectrometer. The electrical potential difference between the sample and the entrance grid provides simultaneous acceleration of both the primary positrons and the secondary electrons. The result is a reduction in the time spread induced by the energy distribution of the secondary electrons. In addition, the sample, sample holder, entrance grid, and entrance face of the multichannel plate electron detector assembly are made parallel to each other, and are arranged at a tilt angle to the axis of the positron beam to effectively separate the path of the secondary electrons from the path of the incident positrons.

Xu, Jun; Moxom, Jeremy

2003-10-21T23:59:59.000Z

211

EA-351 DC Energy Dakota, LLC | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergy DOEDealingVehicle1 Closing American Electric0-A S.A.C.94-A-B1 DC

212

Hardwired Control Changes For NSTX DC Power Feeds  

SciTech Connect (OSTI)

The National Spherical Torus Experiment (NSTX) has been designed and installed in the existing facilities at Princeton Plasma Physics Laboratory (PPPL). Most of the hardware, plant facilities, auxiliary sub-systems, and power systems originally used for the Tokamak Fusion Test Reactor (TFTR) have been used with suitable modifications to reflect NSTX needs. The original TFTR Hardwired Control System (HCS) with electromechanical relays was used for NSTX DC Power loop control and protection during NSTX operations. As part of the NSTX Upgrade, the HCS is being changed to a PLC-based system with the same control logic. This paper gives a description of the changeover to the new PLC-based system __________________________________________________

Ramakrishnan, S.

2013-06-28T23:59:59.000Z

213

Energy Incentive Programs, Washington DC | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergyIDIQBusinessin Jamaica,Idaho EnergyMontanaOregonTexasWashington DC

214

DC Resistivity Survey (Dipole-Dipole Array) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentratingRenewable Solutions LLC JumpCrow Lake Wind JumpCuttings AnalysisDC Resistivity Survey

215

DC Resistivity Survey (Schlumberger Array) At Coso Geothermal Area (1977) |  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentratingRenewable Solutions LLC JumpCrow Lake Wind JumpCuttings AnalysisDC ResistivityOpen

216

DC Resistivity Survey (Wenner Array) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentratingRenewable Solutions LLC JumpCrow Lake Wind JumpCuttings AnalysisDC ResistivityOpen Jump

217

E-Print Network 3.0 - ac-dc power transmission Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ris Summary: (AEDVESESY) DFIG control Power control loop Speed control loop Wind turbine control Measurement grid point AC DC... reference DFIG control Power control...

218

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

E-Print Network [OSTI]

Appliance type Standard technology DC-internal best technology Lighting Incandescent, fluorescent, LED Incandescent Electronic Heating Heater Electric resistance Cooling Motor (& compressor,

Garbesi, Karina

2012-01-01T23:59:59.000Z

219

Design and Modeling of Centralized Distribution Network for the DC House Project.  

E-Print Network [OSTI]

?? This thesis focuses on the design, modeling, simulation, and performance evaluation of Centralized Distribution Network for the DC House Project. Power System Computer Aided… (more)

Bassi, Harpreet S.

2013-01-01T23:59:59.000Z

220

Sustainable Energy Utility- D.C. Home Performance (District of Columbia)  

Broader source: Energy.gov [DOE]

The District of Columbia Sustainable Energy Utility currently offers the D.C. Home Performance program (DCHP). DCHP provides a $500 incentive to properties which successfully complete qualifying...

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Design and analysis of a zero-voltage switching scheme for a dc- to-dc converter  

E-Print Network [OSTI]

&rt~RV, Page 40 Voltage across inain switch in a clc cliopper clrive with zeio-voltage s w 1 't C 1 1 i l1 g , &g CHAPTER I INTRODUCTION A. Introduction In general terms, power electronics is concerned wit, h the conversion and control of electrical... power (dc or ac) at variable voltage and variable frequency. With the development of power semi- conductor devices such as silicon-controlled rectifiers (SCR's), gate-turn-off thyris- tors (GTO's), bipolar junction transistors (BJT's), metal...

Arun, G.

1992-01-01T23:59:59.000Z

222

Data:Eec988f9-dc0d-45ef-9789-a7781dc1934b | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Pagec-01b596aa1744b55997c1ccEeae2669-ec94-4cc4-bbae-0108084310cc No revision has been approved for this81dc1934b No revision

223

Waste form development for a DC arc furnace  

SciTech Connect (OSTI)

A laboratory crucible study was conducted to develop waste forms to treat nonradioactive simulated {sup 238}Pu heterogeneous debris waste from Savannah River, metal waste from the Idaho National Engineering Laboratory (INEL), and nominal waste also from INEL using DC arc melting. The preliminary results showed that the different waste form compositions had vastly different responses for each processing effect. The reducing condition of DC arc melting had no significant effects on the durability of some waste forms while it decreased the waste form durability from 300 to 700% for other waste forms, which resulted in the failure of some TCLP tests. The right formulations of waste can benefit from devitrification and showed an increase in durability by 40%. Some formulations showed no devitrification effects while others decreased durability by 200%. Increased waste loading also affected waste form behavior, decreasing durability for one waste, increasing durability by 240% for another, and showing no effect for the third waste. All of these responses to the processing and composition variations were dictated by the fundamental glass chemistry and can be adjusted to achieve maximal waste loading, acceptable durability, and desired processing characteristics if each waste formulation is designed for the result according to the glass chemistry.

Feng, X.; Bloomer, P.E.; Chantaraprachoom, N.; Gong, M.; Lamar, D.A.

1996-09-01T23:59:59.000Z

224

Control of Parallel-Connected Bidirectional AC-DC Converters in Stationary Frame for Microgrid  

E-Print Network [OSTI]

Control of Parallel-Connected Bidirectional AC-DC Converters in Stationary Frame for Microgrid-- With the penetration of renewable energy in modern power system, microgrid has become a popular application worldwide. In this paper, parallel-connected bidirectional converters for AC and DC hybrid microgrid application

Teodorescu, Remus

225

High Dynamic Performance Programmed PWM Control of a Multilevel Inverter with Capacitor DC Sources  

E-Print Network [OSTI]

High Dynamic Performance Programmed PWM Control of a Multilevel Inverter with Capacitor DC Sources inverter consisting of a stan- dard 3-leg inverter supplied by a DC source and three full H-bridges each reactive voltage to the motor while the standard three leg inverter can supply both reactive and active

Tolbert, Leon M.

226

CTMCONTROL: Addressing the MC/DC Objective for Safety-Critical Automotive Software  

E-Print Network [OSTI]

CTMCONTROL: Addressing the MC/DC Objective for Safety-Critical Automotive Software Anila Mjeda.mjeda,mike.hinchey}@lero.ie Abstract. We propose a method tailored to the requirements of safety-critical embedded automotive software/DC) objective for automotive safety-critical software. CTMCONTROL is validated via a controlled experiment which

Paris-Sud XI, Université de

227

Supervisory Control of an Adaptive-Droop Regulated DC Microgrid with Battery Management  

E-Print Network [OSTI]

such as photovoltaic (PV) systems and secondary batteries. In this paper, several distributed generators (DGs) have1 Supervisory Control of an Adaptive-Droop Regulated DC Microgrid with Battery Management been merged together with a pair of batteries and loads to form an autonomous dc Microgrid (MG

Vasquez, Juan Carlos

228

PID Control with Derivative Filtering Integral Anti-Windup for a DC Servo  

E-Print Network [OSTI]

PID Control with Derivative Filtering and Integral Anti-Windup for a DC Servo Nicanor Quijano in the prelab for PID controllers. For that, we use the DC motor for the SRV-02ET to do position control. You . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.4 PID Controller with Derivative Filtering

229

DC H2O: What's on Tap? Annual Progress Report for FY 2004  

E-Print Network [OSTI]

for distributing treated water to DC residents has taken the brunt of the blame and has developed mechanisms. Project resources have secured a GPS unit and additional resources have already been allocated for GIS as a part of the 4-H Youth Cyber Camp. And as such, will incorporate the technological aspects of the DC H2O

District of Columbia, University of the

230

Smith, D.C., et al., 2000 ODP Technical Note 28  

E-Print Network [OSTI]

Smith, D.C., et al., 2000 ODP Technical Note 28 METHODS FOR QUANTIFYING POTENTIAL MICROBIAL CONTAMINATION DURING DEEP OCEAN CORING 1,2 David C. Smith,3 Arthur J. Spivack,4 Martin R. Fisk,5 Shelley A that these contamination tests be routinely conducted when coring for microbiological studies. 1Smith, D.C., Spivack, A

231

A nonlinear robust HVDC control for a parallel AC/DC power system  

E-Print Network [OSTI]

A nonlinear robust HVDC control for a parallel AC/DC power system Hongzhi Cai a , Zhihua Qu b. Keywords: Robust control; HVDC; Power system; Stability; Lyapunov method 1. Introduction It has been recognized that, through an HVDC transmission line, fast electronic control can be applied on the DC power

Qu, Zhihua

232

EE443L: Intermediate Control Lab Lab2: Modeling a DC motor  

E-Print Network [OSTI]

will develop and validate a basic model of a permanent magnet DC motor (Yaskawa Electric, Mini-series, Minertia of a permanent magnet DC motor, the field current is constant (i.e. a constant magnetic field). It can be shown(t) = input voltage eb(t) = back emf if(t) = field current (t) = shaft angle (t) = torque J = moment

Wedeward, Kevin

233

Federal Government Congressional Budget Office, Health & Human Services, Long Term Modeling Washington, DC  

E-Print Network [OSTI]

Manila, Philippines BRAC Dhaka, Bangladesh California Forward San Francisco, CA CARE (WDI) Atlanta, GA and Dhaka, Bangladesh CARE USA Washington, DC SUMMER 2009 INTERNSHIPS #12;Center for Women Policy Studies Educational Resources Africa Kumasi, Ghana Pew Center on Global Climate Change Washington, DC Rick Snyder

Shyy, Wei

234

Adaptive Selective Harmonic Minimization Based on ANNs for Cascade Multilevel Inverters With Varying DC Sources  

SciTech Connect (OSTI)

A new approach for modulation of an 11-level cascade multilevel inverter using selective harmonic elimination is presented in this paper. The dc sources feeding the multilevel inverter are considered to be varying in time, and the switching angles are adapted to the dc source variation. This method uses genetic algorithms to obtain switching angles offline for different dc source values. Then, artificial neural networks are used to determine the switching angles that correspond to the real-time values of the dc sources for each phase. This implies that each one of the dc sources of this topology can have different values at any time, but the output fundamental voltage will stay constant and the harmonic content will still meet the specifications. The modulating switching angles are updated at each cycle of the output fundamental voltage. This paper gives details on the method in addition to simulation and experimental results.

Filho, Faete [ORNL; Maia, Helder Z [UFMS, Department of Electrical Engineering; Mateus, Tiago Henrique D [ORNL; Ozpineci, Burak [ORNL; Tolbert, Leon M [ORNL; Pinto, Joao Onofre P [ORNL

2013-01-01T23:59:59.000Z

235

Possible temperature control DC switch effect between two superconductors  

E-Print Network [OSTI]

The lifetime of an electron pair could not be unlimited long, on the basis of this, we suggest a model. The model means that the movements of charge carriers in a superconductor should have three forms: the single-electron movement, the single-pair movement, and the revolving around the mass center of two electrons in a pair. Thus the current in a superconductor has three possible parts. Similarly, there should be three possible effects in a SIS junction: the tunneling of single electron, the tunneling of single pair, and the pair-forming following the pair-breaking. This paper will discuss these problems and present a possible temperature control DC switch effect between two superconductors.

Tian De Cao

2011-08-11T23:59:59.000Z

236

Discharging a DC bus capacitor of an electrical converter system  

DOE Patents [OSTI]

A system and method of discharging a bus capacitor of a bidirectional matrix converter of a vehicle are presented here. The method begins by electrically shorting the AC interface of the converter after an AC energy source is disconnected from the AC interface. The method continues by arranging a plurality of switching elements of a second energy conversion module into a discharge configuration to establish an electrical current path from a first terminal of an isolation module, through an inductive element, and to a second terminal of the isolation module. The method also modulates a plurality of switching elements of a first energy conversion module, while maintaining the discharge configuration of the second energy conversion module, to at least partially discharge a DC bus capacitor.

Kajouke, Lateef A; Perisic, Milun; Ransom, Ray M

2014-10-14T23:59:59.000Z

237

Disc rotors with permanent magnets for brushless DC motor  

SciTech Connect (OSTI)

A brushless dc permanent magnet motor drives an autonomous underwater vehe. In one embodiment, the motor comprises four substantially flat stators in stacked relationship, with pairs of the stators axially spaced, each of the stators comprising a tape-wound stator coil, and first and second substantially flat rotors disposed between the spaced pairs of stators. Each of the rotors includes an annular array of permanent magnets embedded therein. A first shaft is connected to the first rotor and a second, concentric shaft is connected to the second rotor, and a drive unit causes rotation of the two shafts in opposite directions. The second shaft comprises a hollow tube having a central bore in which the first shaft is disposed. Two different sets of bearings support the first and second shafts. In another embodiment, the motor comprises two ironless stators and pairs of rotors mounted on opposite sides of the stators and driven by counterrotating shafts.

Hawsey, Robert A. (Oak Ridge, TN); Bailey, J. Milton (Knoxville, TN)

1992-01-01T23:59:59.000Z

238

FLUXCAP: A flux-coupled ac/dc magnetizing device  

E-Print Network [OSTI]

We report on an instrument for applying ac and dc magnetic fields by capturing the flux from a rotating permanent magnet and projecting it between two adjustable pole pieces. This can be an alternative to standard electromagnets for experiments with small samples or in probe stations in which an applied magnetic field is needed locally, with advantages that include a compact form-factor, very low power requirements and dissipation as well as fast field sweep rates. This flux capture instrument (FLUXCAP) can produce fields from -400 to +400 mT, with field resolution less than 1 mT. It generates static magnetic fields as well as ramped fields, with ramping rates as high as 10 T/s. We demonstrate the use of this apparatus for studying the magnetotransport properties of spin-valve nanopillars, a nanoscale device that exhibits giant magnetoresistance.

Gopman, Daniel B; Kent, Andrew D

2012-01-01T23:59:59.000Z

239

Generating expansion model incorporating compact DC power flow equations  

SciTech Connect (OSTI)

This paper presents a compact method of incorporating the spatial dimension into the generation expansion problem. Compact DC power flow equations are used to provide real-power flow coordination equations. Using these equations the marginal contribution of a generator to th total system loss is formulated as a function of that generator`s output. Incorporating these flow equations directly into the MIP formulation of the generator expansion problem results in a model that captures a generator`s true net marginal cost, one that includes both the cost of generation and the cost of transport. This method contrasts with other methods that iterate between a generator expansion model and an optimal power flow model. The proposed model is very compact and has very good convergence performance. A case study with data from Kenya is used to provide a practical application to the model.

Nderitu, D.G.; Sparrow, F.T.; Yu, Z. [Purdue Inst. for Interdisciplinary Engineering Studies, West Lafayette, IN (United States)

1998-12-31T23:59:59.000Z

240

High energy electron fluxes in dc-augmented capacitively coupled plasmas I. Fundamental characteristics  

SciTech Connect (OSTI)

Power deposition from electrons in capacitively coupled plasmas (CCPs) has components from stochastic heating, Joule heating, and from the acceleration of secondary electrons through sheaths produced by ion, electron, or photon bombardment of electrodes. The sheath accelerated electrons can produce high energy beams which, in addition to producing excitation and ionization in the gas can penetrate through the plasma and be incident on the opposite electrode. In the use of CCPs for microelectronics fabrication, there may be an advantage to having these high energy electrons interact with the wafer. To control the energy and increase the flux of the high energy electrons, a dc bias can be externally imposed on the electrode opposite the wafer, thereby producing a dc-augmented CCP (dc-CCP). In this paper, the characteristics of dc-CCPs will be discussed using results from a computational study. We found that for a given rf bias power, beams of high energy electrons having a narrow angular spread (<1 deg. ) can be produced incident on the wafer. The maximum energy in the high energy electron flux scales as {epsilon}{sub max}=-V{sub dc}+V{sub rf}+V{sub rf0}, for a voltage on the dc electrode of V{sub dc}, rf voltage of V{sub rf}, and dc bias on the rf electrode of V{sub rf0}. The dc current from the biased electrode must return to ground through surfaces other than the rf electrode and so seeks out a ground plane, typically the side walls. If the side wall is coated with a poorly conducting polymer, the surface will charge to drive the dc current through.

Wang Mingmei [Department of Chemical and Biological Engineering, Iowa State University, Ames, Iowa 50010 (United States); Kushner, Mark J. [Department of Electrical Engineering and Computer Science, University of Michigan, 1301 Beal Ave., Ann Arbor, Michigan 48109 (United States)

2010-01-15T23:59:59.000Z

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Reduction of DC-link Capacitor in Case of Cascade Multilevel Converters by means of Reactive Power  

E-Print Network [OSTI]

to integrate wind generator to multi- terminal dc collection network are few such examples. The basic block

Teodorescu, Remus

242

Inductorless DC-AC Cascaded H-bridge Multilevel Boost Inverter for Electric/Hybrid Electric Vehicle  

E-Print Network [OSTI]

Inductorless DC-AC Cascaded H-bridge Multilevel Boost Inverter for Electric/Hybrid Electric Vehicle boost inverter for EV and HEV applications. Currently available power inverter systems for HEVs use a DC- DC boost converter to boost the battery voltage for a traditional 3-phase inverter. The present HEV

Tolbert, Leon M.

243

Minimization of DC Reactor and Operation Characteristics of Direct-Power-Controlled Current-Source PWM Rectifier  

E-Print Network [OSTI]

Minimization of DC Reactor and Operation Characteristics of Direct-Power-Controlled Current control; hence inductance of the DC reactor can be reduced. Feasibility of the strategy is verified characteristics of the direct power control based current-source PWM rectifier with a miniaturized DC reactor

Fujimoto, Hiroshi

244

Impact of quasi-dc currents on three-phase distribution transformer installations  

SciTech Connect (OSTI)

This report summarizes a series of tests designed to determine the response of quasi-dc currents on three-phase power distribution transformers for electric power systems. In general, if the dc injection is limited to the primary side of a step-down transformer, significant harmonic distortion is noted and an increase in the reactive power demand results. For dc injection on the secondary (load) side of the step-down transformer the harmonic content at the secondary side is quite high and saturation occurs with a relatively low level of dc injection; however, the reactive power demand is significantly lower. These tests produced no apparent damage to the transformers. Transformer damage is dependent on the duration of the dc excitation, the level of the excitation, and on thermal characteristics of the transfer. The transformer response time is found to be much shorter than seen in power transformer tests at lower dc injection levels. This shorter response time suggests that the response time is strongly dependent on the injected current levels, and that higher levels of dc injection for shorter durations could produce very high reactive power demands and harmonic distortion within a few tenths of a second. The added reactive power load could result in the blowing of fuses on the primary side of the transformer for even moderate dc injection levels, and neutral currents are quite large under even low-level dc injection. This smoking neutral'' results in high-level harmonic injection into equipment via the neutral and in possible equipment failure.

McConnell, B.W.; Barnes, P.R. (Oak Ridge National Lab., TN (United States)); Tesche, F.M. (Tesche (F.M.), Dallas, TX (United States)); Schafer, D.A. (Mission Research Corp., Albuquerque, NM (United States))

1992-06-01T23:59:59.000Z

245

Observation and cancellation of the dc Stark shift in strontium optical lattice clocks  

E-Print Network [OSTI]

We report on the observation of a dc Stark frequency shift at the $10^{-13}$ level by comparing two strontium optical lattice clocks. This frequency shift arises from the presence of electric charges trapped on dielectric surfaces placed under vacuum close to the atomic sample. We show that these charges can be eliminated by shining UV light on the dielectric surfaces, and characterize the residual dc Stark frequency shift on the clock transition at the $10^{-18}$ level by applying an external electric field. This study shows that the dc Stark shift can play an important role in the accuracy budget of lattice clocks, and should be duly taken into account.

Lodewyck, Jérôme; Lorini, Luca; Gurov, Mikhail; Lemonde, Pierre

2011-01-01T23:59:59.000Z

246

The smoothing transformer, a new concept in dc side harmonic reduction of HVdc schemes  

SciTech Connect (OSTI)

Direct connection schemes have been a subject of recent investigation, offering operational flexibility and substantial reductions in ac components. In these schemes the use of active dc filters has been suggested to replace the conventional tuned passive filter design. This paper presents the smoothing transformer as a new means for reducing dc harmonics at characteristic and non-characteristic frequencies using only passive components. A realistic smoothing transformer design is examined using the New Zealand HVdc system operating in the direct connection mode. The steady-state and transient performance of the smoothing transformer design is compared with that of the existing dc smoothing reactor and filter bank.

Enright, W.; Arrillaga, J.; Wood, A.R.; Hidalgo, F.P.

1996-10-01T23:59:59.000Z

247

Vehicle Technologies Office Merit Review 2014: High Performance DC Bus Film Capacitor  

Broader source: Energy.gov [DOE]

Presentation given by GE Global Research at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about high performance DC bus...

248

Strontium Titanate DC Electric Field Switchable and Tunable Bulk Acoustic Wave Solidly Mounted Resonator  

E-Print Network [OSTI]

Strontium Titanate DC Electric Field Switchable and Tunable Bulk Acoustic Wave Solidly Mounted Abstract - A voltage switchable/tunable strontium titanate solidly mounted BAW resonator was implemented films, piezoelectric resonators. I. INTRODUCTION Strontium titanate (STO) and barium strontium titanate

York, Robert A.

249

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

E-Print Network [OSTI]

a-vis the impact of partial loads on power system componentto test the effect of partial load conditions and possibleto direct-DC savings. Partial load effects reduce estimates

Garbesi, Karina

2012-01-01T23:59:59.000Z

250

Over-Current Protection Scheme for SiC Power MOSFET DC Circuit Breaker  

E-Print Network [OSTI]

V. Radun, “SiC based solid state power controller,” in 23tha solid-state circuit breaker based on SiC power MOSFET withSolid-state DC circuit breakers made of the modern wide bandgap power

Zhang, Yuan; Liang, Yung C.

2015-01-01T23:59:59.000Z

251

Application to Export Electric Energy OE Docket No. EA-351 DC...  

Broader source: Energy.gov (indexed) [DOE]

DC Energy Dakota, LLC Application to export electric energy OE Docket No. EA-210-B PPL EnergyPlus, LLC Application to Export Electric Energy OE Docket No. EA-354 Endure...

252

Hydrogen Storage Systems Analysis Working Group Meeting Argonne National Laboratory DC Offices  

E-Print Network [OSTI]

Hydrogen Storage Systems Analysis Working Group Meeting Argonne National Laboratory DC Offices 955 by Romesh Kumar Argonne National Laboratory and Laura Verduzco Sentech, Inc. February 28, 2007 #12;SUMMARY

253

Measured Savings of DC to AC Drive Retrofit in Plastic Extrusion  

E-Print Network [OSTI]

This paper presents the potential electrical energy efficiency improvements for utilizing alternating current (AC) motors controlled by variable frequency drives (VFD) in place of direct current (DC) motors to drive plastic extrusion machines. A...

Sfeir, R. A.

2008-01-01T23:59:59.000Z

254

Dean's Report from DC (Nov 2011) 1: Federal Science Funding PerspecAve  

E-Print Network [OSTI]

Dean's Report from DC (Nov 2011) 1: Federal Science Funding Perspec (AdministraAon's) FY12 PrioriAes Ã? Moving toward a clean energy future to reduce dependence on energy imports while curbing greenhouse gas emissions Ã? Understanding

Wang, Yuqing

255

Washington, D.C. : essays on the city form of a capital  

E-Print Network [OSTI]

This thesis is an exploration of the city form of Washington. D.C. through four independent essays. Each essay examines a different aspect of the city: its monumentality as determined by its relationship with the nation ...

Kousoulas, George

1985-01-01T23:59:59.000Z

256

Area Efficient D/A Converters For Accurate DC Operation Brandon Royce Greenley  

E-Print Network [OSTI]

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 6.2 Mismatch Modeling For Area Optimization . . . . . . . . . . . . . . . . . . . . . . . 51 6Area Efficient D/A Converters For Accurate DC Operation by Brandon Royce Greenley A THESIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 5.1 Measurement Setup

Moon, Un-Ku

257

DC-OPF Formulation with Price-Sensitive Demand Bids Junjie Sun and Leigh Tesfatsion  

E-Print Network [OSTI]

DC-OPF Formulation with Price-Sensitive Demand Bids Junjie Sun and Leigh Tesfatsion Last Revised (TNCS) subject to various transmission constraints. As explained at length in Sun and Tesfation (2007

Tesfatsion, Leigh

258

Multilevel-Dc-Bus Inverter For Providing Sinusoidal And Pwm Electrical Machine Voltages  

DOE Patents [OSTI]

A circuit for controlling an ac machine comprises a full bridge network of commutation switches which are connected to supply current for a corresponding voltage phase to the stator windings, a plurality of diodes, each in parallel connection to a respective one of the commutation switches, a plurality of dc source connections providing a multi-level dc bus for the full bridge network of commutation switches to produce sinusoidal voltages or PWM signals, and a controller connected for control of said dc source connections and said full bridge network of commutation switches to output substantially sinusoidal voltages to the stator windings. With the invention, the number of semiconductor switches is reduced to m+3 for a multi-level dc bus having m levels. A method of machine control is also disclosed.

Su, Gui-Jia [Knoxville, TN

2005-11-29T23:59:59.000Z

259

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

E-Print Network [OSTI]

wind/fuel cell hybrid energy systems. Energy and Buildings,National Energy Modeling System PHEV plug-in hybrid electrica hybrid DC and AC power system that included energy storage

Garbesi, Karina

2012-01-01T23:59:59.000Z

260

High luminosity, slow ejecta and persistent carbon lines: SN 2009dc challenges thermonuclear explosion scenarios .  

E-Print Network [OSTI]

??Extended optical and near-IR observations reveal that SN 2009dc shares a number of similarities with normal Type Ia supernovae (SNe Ia), but is clearly overluminous,… (more)

Taubenberger, S.

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

ReHABit : claiming endangered structures in Washington DC to rethink subsidized housing  

E-Print Network [OSTI]

There is an affordable housing crisis today in Washington D.C. that is the result of a uniquely complicated history of a capital city and a current economic boom. This thesis responds to that crisis by proposing a new ...

Fowlkes, Catherine Kuhnle

2007-01-01T23:59:59.000Z

262

Nonlinear modal interaction in HVDC/AC power systems with dc power modulation  

SciTech Connect (OSTI)

In this paper investigation of nonlinear modal interaction using the normal form of vector fields technique is extended to HVDC/AC power systems with dc power modulation. The ac-dc interface equations are solved to form a state space model with second order approximation. Using the normal form technique, the system`s nonlinear dynamic characteristics are obtained. The proposed approach is applied to a 4-generator HVDC/AC test power system, and compare with the time domain solution.

Ni, Y.X. [Tsinghua Univ., Beijing (China)] [Tsinghua Univ., Beijing (China); Vittal, V.; Kliemann, W.; Fouad, A.A. [Iowa State Univ., Ames, IA (United States)] [Iowa State Univ., Ames, IA (United States)

1996-11-01T23:59:59.000Z

263

RI_50m_Wind  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Metadata also available as Metadata: IdentificationInformation DataQualityInformation SpatialDataOrganizationInformation SpatialReferenceInformation EntityandAttributeI...

264

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

SciTech Connect (OSTI)

An increasing number of energy efficient appliances operate on direct current (DC) internally, offering the potential to use DC from renewable energy systems directly and avoiding the losses inherent in converting power to alternating current (AC) and back. This paper investigates that potential for net-metered residences with on-site photovoltaics (PV) by modeling the net power draw of the ‘direct-DC house’ with respect to today’s typical configuration, assuming identical DC-internal loads. Power draws were modeled for houses in 14 U.S. cities, using hourly, simulated PV-system output and residential loads. The latter were adjusted to reflect a 33% load reduction, representative of the most efficient DC-internal technology, based on an analysis of 32 electricity end-uses. The model tested the effect of climate, electric vehicle (EV) loads, electricity storage, and load shifting on electricity savings; a sensitivity analysis was conducted to determine how future changes in the efficiencies of power system components might affect savings potential. Based on this work, we estimate that net-metered PV residences could save 5% of their total electricity load for houses without storage and 14% for houses with storage. Based on residential PV penetration projections for year 2035 obtained from the National Energy Modeling System (2.7% for the reference case and 11.2% for the extended policy case), direct-DC could save the nation 10 trillion Btu (without storage) or 40 trillion Btu (with storage). Shifting the cooling load by two hours earlier in the day (pre-cooling) has negligible benefits for energy savings. Direct-DC provides no energy savings benefits for EV charging, to the extent that charging occurs at night. However, if charging occurred during the day, for example with employees charging while at work, the benefits would be large. Direct-DC energy savings are sensitive to power system and appliance conversion efficiencies but are not significantly influenced by climate. While direct-DC for residential applications will most likely arise as a spin-off of developments in the commercial sector—because of lower barriers to market entry and larger energy benefits resulting from the higher coincidence between load and insolation—this paper demonstrates that there are substantial benefits in the residential sector as well. Among residential applications, space cooling derives the largest energy savings from being delivered by a direct-DC system. It is the largest load for the average residence on a national basis and is particularly so in high-load regions. It is also the load with highest solar coincidence.

Garbesi, Karina; Vossos, Vagelis; Sanstad, Alan; Burch, Gabriel

2011-10-13T23:59:59.000Z

265

Trapped-ion cell with improved DC potential harmonicity for FT-ICR MS  

SciTech Connect (OSTI)

The trapped-ion cell is a key component critical for optimal performance in Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry (MS). We have upgraded our 12 Tesla FT-ICR instrument with a new open cylindrical cell that includes four additional cylindrical segments that serve as compensation electrodes. The DC potential on the additional segments can be set to specific pre-calculated values to suppress DC trapping field anharmonicity, in an effort to improve coherence of the ion cyclotron motion and minimize deviations from the calibration function of the ideal cell. Alternatively, the compensation potentials can be set equal to potentials of adjacent cell electrodes, which creates a DC potential distribution equivalent to that of a regular open cylindrical cell. The initial experimental characterization of both the compensated and open cell configurations was performed using ESI direct infusion of a peptide mixture. Operating the compensated cell at increased post-excitation radii resulted in improved mass measurement accuracy together with increased signal intensity, while the regular configuration exhibited peak splitting and reduced signal life time under these operating conditions. The observed improvement of the compensated cell performance was consistent with the expected behavior due to the improved DC potential harmonicity. These results confirm that the trapping DC potential harmonicity is significant for optimizing FT-ICR MS performance.

Tolmachev, Aleksey V.; Robinson, Errol W.; Wu, Si; Kang, Hyuk; Lourette, Natacha M.; Pasa-Tolic, Ljiljana; Smith, Richard D.

2008-04-01T23:59:59.000Z

266

Development of 500 kV DC PPLP-insulated oil-filled submarine cable  

SciTech Connect (OSTI)

This paper outlines the development of a 500 kV DC oil-filled submarine cable capable of transmitting 2,800 MW with {+-} 500 kV 2800A bipole system. Polypropylene Laminated Paper (PPL) was employed as the insulation material, which is the worlds first application to DC cables. The conductor size is 3,000 mm{sup 2}, which is the largest size for submarine cables ever put into practical use. Through various fundamental and prototype tests, the cable proved to have excellent electrical characteristics for DC voltage as well as transient overvoltage. The cable and accessories are currently undergoing a long-term accelerated aging test as the final confirmation of their reliability and stability.

Fujimori, A. [Kansai Electric Power Co., Inc., Osaka (Japan)] [Kansai Electric Power Co., Inc., Osaka (Japan); Tanaka, T. [Electric Power Development Co., Ltd., Tokyo (Japan)] [Electric Power Development Co., Ltd., Tokyo (Japan); Takashima, H. [Shikoku Electric Power Co., Inc., Kagawa (Japan)] [Shikoku Electric Power Co., Inc., Kagawa (Japan); Imajo, T. [Central Research Inst. of Electric Power Industry, Tokyo (Japan)] [Central Research Inst. of Electric Power Industry, Tokyo (Japan); Hata, R. [Sumitomo Electric Industries, Ltd., Osaka (Japan)] [Sumitomo Electric Industries, Ltd., Osaka (Japan); Tanabe, T. [Furukawa Electric Co., Ltd., Tokyo (Japan)] [Furukawa Electric Co., Ltd., Tokyo (Japan); Yoshida, S. [Fujikura, Ltd., Tokyo (Japan)] [Fujikura, Ltd., Tokyo (Japan); Kakihana, T. [Hitachi Cable, Ltd., Tokyo (Japan)] [Hitachi Cable, Ltd., Tokyo (Japan)

1996-01-01T23:59:59.000Z

267

Solid Silicone Elastomer Material(DC745U)-Historical Overview and New Experimental Results  

SciTech Connect (OSTI)

DC745U is a silicone elastomer used in several weapon systems. DC745U is manufactured by Dow Corning and its formulation is proprietary. Risk changes without notification to the customer. {sup 1}H and {sup 29}Si{l_brace}{sup 1}H{r_brace} NMR have previously determined that DC745U contains {approx} 98.5% dimethyl siloxane, {approx}1.5% methyl-phenyl siloxane, and a small amount (<1%) of vinyl siloxane repeat units that are converted to crosslinking sites. The polymer is filled with {approx} 38 wt.% of a mixture of fumed silica and quartz. Some conclusions are: (1) DMA shows that crystallization does have an effect on the mechanical properties of DC745U; (2) DMA shows that the crystallization is time and temperature dependent; (3) Mechanical tests show that DC745U undergo a crystalline transition at temperatures below -50 C; (4) Rate and temperature does not have an effect above crystalline transition; (5) Crystalline transition occurs faster at colder temperatures; (6) The material remains responsive and recovers after warming it to temperature above -40 C; (7) We were able to review all previous historical data on DC745U; (8) Identified specific gaps in materials understanding; (9) Developed design of experiments and testing methods to address gaps associated with post-curing and low temperature mechanical behavior; (10) Resolved questions of post-cure and alleviated concerns associated with low temperature mechanical behavior with soak time and temperature; and (11) This work is relevant to mission-critical programs and for supporting programmatic work for weapon research.

Ortiz-Acosta, Denisse [Los Alamos National Laboratory

2012-08-08T23:59:59.000Z

268

Control of current and voltage oscillations in a short dc discharge making use of external auxiliary electrode  

E-Print Network [OSTI]

Control of current and voltage oscillations in a short dc discharge making use of external://rsi.aip.org/about/rights_and_permissions #12;REVIEW OF SCIENTIFIC INSTRUMENTS 83, 103502 (2012) Control of current and voltage oscillations October 2012) A dc discharge with a hot cathode is subject to current and voltage plasma oscillations

Kaganovich, Igor

269

The DC field components of horizontal and vertical electric dipole sources immersed in three-layered stratified media  

E-Print Network [OSTI]

for the solution in the case of horizontal electric dipole (HED) radiation source and the single-component HertzThe DC field components of horizontal and vertical electric dipole sources immersed in three- ponents of the static (DC) fields of horizontal electric dipoles ( HEDs) and vertical electric dipoles

Boyer, Edmond

270

Superconductivity for Electric Systems Annual Peer Review Washington, DC July 27-29, 2004. OAK RIDGE NATIONAL LABORATORY  

E-Print Network [OSTI]

Superconductivity for Electric Systems Annual Peer Review Washington, DC ­ July 27-29, 2004. OAK RIDGE NATIONAL LABORATORY U. S. DEPARTMENT OF ENERGY American Superconductor Corporation U. Schoop, M. W&D support #12;Superconductivity for Electric Systems Annual Peer Review Washington, DC ­ July 27-29, 2004

271

New Power Electronics Converter Interfacing a Hybrid Dc/Ac Microgrid M. Alibeik, E. C. dos Santos Jr.  

E-Print Network [OSTI]

New Power Electronics Converter Interfacing a Hybrid Dc/Ac Microgrid M. Alibeik, E. C. dos Santos microgrid is that it has higher efficiency and lesser power conversion. In this work is proposed a new integrated power electronics converter able to connect a Distributed Generation (DG) unit with a hybrid dc

Zhou, Yaoqi

272

Abstract--Environmentally friendly technologies such as photovoltaics and fuel cells are DC sources. In the current power  

E-Print Network [OSTI]

Abstract--Environmentally friendly technologies such as photovoltaics and fuel cells are DC sources in pollution [1]. The most well-known green technologies include photovoltaics and wind turbines. Although fuel, fuel cells and photovoltaics, produce direct current (DC). Currently, power system infrastructures

Tolbert, Leon M.

273

US MidAtl NJ Site Consumption  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S. NaturalA. Michael SchaalNovember 26,8,CoalThousandIL Site Consumption120MidAtl

274

Microsoft Word - FUSRAP Maywood NJ.rtf  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545*. . : '*I_1Shiprock, New

275

Microsoft Word - FUSRAP Middlesex NJ.doc  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545*. . : '*I_1Shiprock, NewEngineers® New

276

Microsoft Word - FUSRAP Wayne NJ.rtf  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545*. . : '*I_1Shiprock, NewEngineers® New

277

ZERH Training Session: East Brunswick, NJ  

Broader source: Energy.gov [DOE]

This 3.5-hour training provides builders with a comprehensive review of zero energy-ready home construction including the business case, detailed specifications, and opportunities to be recognized...

278

SolarWorks NJ | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov Pty Ltd Jump to:Information SilverSolarStructure Ltd Jump to:SolarWaterWorld

279

A Five-Level Three-Phase Hybrid Cascade Multilevel Inverter Using a Single DC Source  

E-Print Network [OSTI]

A Five-Level Three-Phase Hybrid Cascade Multilevel Inverter Using a Single DC Source for a PM to construct a 3-phase 5-level cascade multilevel inverter to be used as a drive for a PM traction motor. The 5-level inverter consists of a standard 3-leg inverter (one leg for each phase) and an H-bridge in series

Tolbert, Leon M.

280

INVESTIGATION OF ELECTRIC CONDITIONS IN THE VICINITY OF CARBON NANOTUBES GROWN IN A DC PLASMA SHEATH  

E-Print Network [OSTI]

nanotubes (CNTs ­ long tubular carbon nanostructures) belong to the best electron field emitting materials, such as nanoelectronics devices or mechanical reinforcement in composite materials [2,3]. The field emission propertiesINVESTIGATION OF ELECTRIC CONDITIONS IN THE VICINITY OF CARBON NANOTUBES GROWN IN A DC PLASMA

Boyer, Edmond

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Electron-deformation mechanism of photoexcitation of hypersound in semiconductors in a dc electric field  

SciTech Connect (OSTI)

The effect of a dc electric field on photoexcitation of a hypersonic pulse in a semiconductor via an electron-deformation mechanism is studied. The profiles of acoustic pulses are simulated for different directions of the electric field. (laser applications and other topics in quantum electronics)

Chigarev, N V [International Laser Center, M. V. Lomonosov Moscow State University, Moscow (Russian Federation)

2002-09-30T23:59:59.000Z

282

Observation and cancellation of the dc Stark shift in strontium optical lattice clocks  

E-Print Network [OSTI]

1 Observation and cancellation of the dc Stark shift in strontium optical lattice clocks J fre- quency shift at the 10-13 level by comparing two strontium optical lattice clocks. This frequency candidates for future optical frequency references. Among them, the development of strontium lattice clocks

Paris-Sud XI, Université de

283

Rotary Electrodynamics of a DC Motor: Motor as Mechanical Capacitor Lab 2: Modeling and System Identification  

E-Print Network [OSTI]

). · im is the current through the motor. Because the motor is in series with all other electrical). Because power is conserved, m = Kmim (motor efficiency is actually closer to 69%). Here, Km 0.00767 VRotary Electrodynamics of a DC Motor: Motor as Mechanical Capacitor Lab 2: Modeling and System

284

Copyright 2011 American Chemical Society 1155 Sixteenth Street N.W., Washington, DC 20036  

E-Print Network [OSTI]

Copyright © 2011 American Chemical Society 1155 Sixteenth Street N.W., Washington, DC 20036 For Selected: Application of Highly Ordered TiO2 Nanotube Arrays in Flexible Dye-Sensitized Solar Cells Daibin Light-Emitting Diodes on Solution-Processed Graphene Transparent Electrodes Junbo Wu, Mukul Agrawal, H

Aksay, Ilhan A.

285

A Comparison of the AC and DC Power Flow Models for LMP Calculations  

E-Print Network [OSTI]

A Comparison of the AC and DC Power Flow Models for LMP Calculations Thomas J. Overbye, Xu Cheng power flow model for LMP-based market calculations. The paper first provides a general discussion of balanced, three phase, electric power transmission networks is through the solution of the power flow. From

286

Use of Facility Contractor Employees for Services to DOE in the Washington, D.C., Area  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To clarify and modify policies and procedures for management of Department of Energy (DOE), including National Nuclear Security Administration (NNSA), facility contractor employees located in the Washington, D.C., area. Cancels DOE N 350.5. Certified 12-28-06. Canceled by DOE O 350.2A.

2001-07-12T23:59:59.000Z

287

Electrical detection of spin pumping: dc voltage generated by ferromagnetic resonance at ferromagnet/nonmagnet contact  

E-Print Network [OSTI]

Electrical detection of spin pumping: dc voltage generated by ferromagnetic resonance We describe electrical detection of spin pumping in metallic nanostructures. In the spin pumping effect, a precessing ferromagnet attached to a normal metal acts as a pump of spin-polarized current

van der Wal, Caspar H.

288

New Global Alliance Formed to Undercut Illegal WASHINGTON, DC, May 26, 2010 (ENS) -To reduce trade  

E-Print Network [OSTI]

New Global Alliance Formed to Undercut Illegal Logging WASHINGTON, DC, May 26, 2010 (ENS. "Some companies are not aware of the need to ask questions about the wood they are buying than on the performance of individual companies, and will complement existing initiatives that certify

289

Optical Investigations of Dust Particles Distribution in RF and DC Discharges  

SciTech Connect (OSTI)

Optical emission spectroscopy is used to study dust particles movement and conditions of a formation of ordered plasma-dust structures in a capacitively coupled RF discharge. 3D binocular diagnostics of plasma-dust structures in dc discharge was made.

Ramazanov, T. S.; Dosbolayev, M. K.; Jumabekov, A. N.; Amangaliyeva, R. Zh. [Al-Farabi Kazakh National University, IETP, 96a Tole Bi St., Almaty 050012 (Kazakhstan); Filatova, I. I.; Azharonok, V. V. [B. I. Stepanov Institute of Physics NAS of Belarus, Nezavisimosti Ave., 68, 220072, Minsk (Belarus)

2008-09-07T23:59:59.000Z

290

Save the Date for ACES 2014! Washington D.C. | December 811, 2014  

E-Print Network [OSTI]

methods and experiences relating to Ecosystem Services. Specific themes to be ad dressed include that ACES: A Community on Ecosystem Services, in partner ship with the Ecosystem Markets Community and the Ecosystem Services Partnership, will host the ACES 2014 Conference in Washington, DC, December 811, 2014

Watson, Craig A.

291

Proceedings IEEE International Test Conference, Washington, DC, 1990 Generating Pseudo-Exhaustive Vectors for External Testing  

E-Print Network [OSTI]

Proceedings IEEE International Test Conference, Washington, DC, 1990 Generating Pseudo-Exhaustive Vectors for External Testing S. Hellebrand, H.-J. Wunderlich, O. F. Haberl Institute of Computer Design. Germany Abstract In the past years special chips for external test have been suc- cessfully used

Hellebrand, Sybille

292

Investigation of DC distribution by measuring and modelling power supply devices for buildings with PV  

E-Print Network [OSTI]

requiring power transformation components. Since any type of load can be potentially fed with direct current panels without any power transformation seems to be obvious, nevertheless, precise simulations needInvestigation of DC distribution by measuring and modelling power supply devices for buildings

Paris-Sud XI, Université de

293

Performance test results for the Eaton dc developmental power train in an electric test bed vehicle  

SciTech Connect (OSTI)

This report presents the results of the tests performed on a direct current (dc) power train in a test bed vehicle developed by the Eaton Corporation for the US Department of Energy (DOE). The tests were performed by EG and G Idaho, Inc. at the Idaho National Engineering Laboratory (INEL). The purpose of the INEL testing was to provide test results from which an evaluation of the performance capabilities of the Eaton dc power train could be made and compared with other vehicle propulsion systems. The planned tests were primarily oriented toward road testing, chassis dynamometer testing, and associated dynamometer coastdown tests for road loss determination. Range tests of the Eaton dc test bed vehicle using an ALCO 2200 lead acid battery pack, produced ranges of 97 km at 56 km/h (60 miles at 35 mph), 79 km at 72 km/h (49 miles at 45 mph), and 47 km at 88 km/h (29 miles at 55 mph). The corresponding net dc energy consumptions are 135 Wh/km (217 Wh/mile), 145 Wh/km (233 Wh/mile), and 178 Wh/km (287 Wh/mile). The energy consumption for the D-cycle test was 241 Wh/km (387 Wh/mile). 8 refs., 11 figs., 16 tabs.

Crumley, R.L.; Donaldson, M.R.

1987-09-01T23:59:59.000Z

294

D.C. WRRC Report No.41 DIRECTORY OF WATER-RELATED  

E-Print Network [OSTI]

D.C. WRRC Report No.41 #12;#12;DIRECTORY OF WATER-RELATED ORGANIZATIONS IN THE DISTRICT OF COLUMBIA 1982 Preparations of the directory was supported in part by Federal funds from the Office of Water. The directory of water-related organizations in the District of Columbia has been prepared as part

District of Columbia, University of the

295

Control of a Fuel-Cell Powered DC Electric Vehicle Motor Federico Zenith  

E-Print Network [OSTI]

Control of a Fuel-Cell Powered DC Electric Vehicle Motor Federico Zenith Sigurd Skogestad Introduction Research in fuel cells receives currently a lot of interest. Fuel cells can be used, in different. However, the dynamics of fuel cells has received comparatively less attention. Control of fuel cells

Skogestad, Sigurd

296

HIDDEN DAMAGE DETECTION FOR MAIN CABLES OF SUSPENSION BRIDGES INCORPORATING DC MAGNETIZATION WITH A SEARCH COIL-  

E-Print Network [OSTI]

with artificially inflicted broken wires. KEYWORDS : Cable NDE, Search coil, Total flux, DC magnetization, Damage. To overcome this limitation, this study proposes a noncontact cable inspection system incorporating been applied for the inspection of steel cables for ski lifts, elevators, and for other applications

Boyer, Edmond

297

Policy Research Working Paper 4844, World Bank, Washington DC, April 2009 Weakly Relative Poverty  

E-Print Network [OSTI]

Policy Research Working Paper 4844, World Bank, Washington DC, April 2009 Weakly Relative Poverty, 20433, USA Abstract: Prevailing measures of relative poverty are unchanged when all incomes grow that relax these assumptions. On calibrating our measures to national poverty lines and survey data, we find

Krivobokova, Tatyana

298

IEEE Photovoltaic Specialists Conference Washington, D.C., May 13-17, 1996  

E-Print Network [OSTI]

IEEE Photovoltaic Specialists Conference Washington, D.C., May 13-17, 1996 NICHE MARKETS FOR GRID-CONNECTED PHOTOVOLTAICS Howard Wenger Pacific Energy Group Walnut Creek, CA, USA Christy Herig & Roger Taylor National- Sited Photovoltaics (CSPV) in the United States. 1 The intent is to demonstrate markets that are cost

Perez, Richard R.

299

AC PV Modules Take a standard DC PV module and connect a microinverter  

E-Print Network [OSTI]

modules. These inverters range in power from 700 watts up to 1 megawatt. DC maximum system voltages can and up to 13 inverters for the 210 W version to be installed on the same AC output cable. home power 136, and secure a listing to UL1741 for a pre-assembled module/inverter device, and you have an AC PV module

Johnson, Eric E.

300

First National Conference on Carbon Sequestration Washington, DC, May 14-17, 2001  

E-Print Network [OSTI]

First National Conference on Carbon Sequestration Washington, DC, May 14-17, 2001 Caldeira, K for Research on Ocean Carbon Sequestration (DOCS) *Climate and Carbon Cycle Modeling Group, Lawrence Livermore carbon sequestration strategy. Therefore, we want to understand the effectiveness of oceanic injection

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Living downtown in Washington, D.C. : defining residential community in the city center  

E-Print Network [OSTI]

In Washington D.C., as in many other American cities, a significant section of the downtown is distinguished by boarded-up buildings and vacant lots. In spite of traces of a city plan that could organize and accommodate a ...

Allen, Robin P. (Robin Porter)

1995-01-01T23:59:59.000Z

302

Data:5df914dc-748a-4757-980d-c7fa8bd9d9fe | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office695810186 No revision has been approved for this page. It1f847bdc66d-c7fa8bd9d9fe No revision has been approved

303

Data:065fb21d-c75b-4a75-860e-13fd93d1dc6e | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentratingRenewable Solutions6ae4e73fc No revision hasb9e2-8af452ac6862 Noa75-860e-13fd93d1dc6e

304

Data:Dc67dc28-a58d-434e-bd5b-bf00a13198f9 | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Pagec-01b596aa1744 No revisionDbdad3b1-04dc-40cd-843e-921faaade910 No revisionb82a5cccd0d8 No revision has been approved

305

Impact of quasi-dc currents on three-phase distribution transformer installations. Power Systems Technology Program  

SciTech Connect (OSTI)

This report summarizes a series of tests designed to determine the response of quasi-dc currents on three-phase power distribution transformers for electric power systems. In general, if the dc injection is limited to the primary side of a step-down transformer, significant harmonic distortion is noted and an increase in the reactive power demand results. For dc injection on the secondary (load) side of the step-down transformer the harmonic content at the secondary side is quite high and saturation occurs with a relatively low level of dc injection; however, the reactive power demand is significantly lower. These tests produced no apparent damage to the transformers. Transformer damage is dependent on the duration of the dc excitation, the level of the excitation, and on thermal characteristics of the transfer. The transformer response time is found to be much shorter than seen in power transformer tests at lower dc injection levels. This shorter response time suggests that the response time is strongly dependent on the injected current levels, and that higher levels of dc injection for shorter durations could produce very high reactive power demands and harmonic distortion within a few tenths of a second. The added reactive power load could result in the blowing of fuses on the primary side of the transformer for even moderate dc injection levels, and neutral currents are quite large under even low-level dc injection. This ``smoking neutral`` results in high-level harmonic injection into equipment via the neutral and in possible equipment failure.

McConnell, B.W.; Barnes, P.R. [Oak Ridge National Lab., TN (United States); Tesche, F.M. [Tesche (F.M.), Dallas, TX (United States); Schafer, D.A. [Mission Research Corp., Albuquerque, NM (United States)

1992-06-01T23:59:59.000Z

306

Ions in solution: Density corrected density functional theory (DC-DFT)  

SciTech Connect (OSTI)

Standard density functional approximations often give questionable results for odd-electron radical complexes, with the error typically attributed to self-interaction. In density corrected density functional theory (DC-DFT), certain classes of density functional theory calculations are significantly improved by using densities more accurate than the self-consistent densities. We discuss how to identify such cases, and how DC-DFT applies more generally. To illustrate, we calculate potential energy surfaces of HO·Cl{sup ?} and HO·H{sub 2}O complexes using various common approximate functionals, with and without this density correction. Commonly used approximations yield wrongly shaped surfaces and/or incorrect minima when calculated self consistently, while yielding almost identical shapes and minima when density corrected. This improvement is retained even in the presence of implicit solvent.

Kim, Min-Cheol; Sim, Eunji, E-mail: esim@yonsei.ac.kr [Department of Chemistry and Institute of Nano-Bio Molecular Assemblies, Yonsei University, 50 Yonsei-ro Seodaemun-gu, Seoul 120-749 (Korea, Republic of)] [Department of Chemistry and Institute of Nano-Bio Molecular Assemblies, Yonsei University, 50 Yonsei-ro Seodaemun-gu, Seoul 120-749 (Korea, Republic of); Burke, Kieron [Department of Chemistry, University of California, Irvine, California 92697 (United States)] [Department of Chemistry, University of California, Irvine, California 92697 (United States)

2014-05-14T23:59:59.000Z

307

Demonstration of Cathode Emittance Dominated High Bunch Charge Beams in a DC gun-based Photoinjector  

E-Print Network [OSTI]

We present the results of transverse emittance and longitudinal current profile measurements of high bunch charge (greater than or equal to 100 pC) beams produced in the DC gun-based Cornell Energy Recovery Linac Photoinjector. In particular, we show that the cathode thermal and core beam emittances dominate the final 95% and core emittance measured at 9-9.5 MeV. Additionally, we demonstrate excellent agreement between optimized 3D space charge simulations and measurement, and show that the quality of the transverse laser distribution limits the optimal simulated and measured emittances. These results, previously thought achievable only with RF guns, demonstrate that DC gun based photoinjectors are capable of delivering beams with sufficient single bunch charge and beam quality suitable for many current and next generation accelerator projects such as Energy Recovery Linacs (ERLs) and Free Electron Lasers (FELs).

Gulliford, Colwyn; Bazarov, Ivan; Dunham, Bruce; Cultrera, Luca

2015-01-01T23:59:59.000Z

308

Switch contact device for interrupting high current, high voltage, AC and DC circuits  

DOE Patents [OSTI]

A high voltage switch contact structure capable of interrupting high voltage, high current AC and DC circuits. The contact structure confines the arc created when contacts open to the thin area between two insulating surfaces in intimate contact. This forces the arc into the shape of a thin sheet which loses heat energy far more rapidly than an arc column having a circular cross-section. These high heat losses require a dramatic increase in the voltage required to maintain the arc, thus extinguishing it when the required voltage exceeds the available voltage. The arc extinguishing process with this invention is not dependent on the occurrence of a current zero crossing and, consequently, is capable of rapidly interrupting both AC and DC circuits. The contact structure achieves its high performance without the use of sulfur hexafluoride.

Via, Lester C.; Witherspoon, F. Douglas; Ryan, John M.

2005-01-04T23:59:59.000Z

309

Efficiency consideration of DC link soft-switching inverters for motor drive applications  

SciTech Connect (OSTI)

This paper critically evaluates efficiency of soft switching inverters including an actively clamped resonant dc link inverter and a clamped-mode resonant pole inverter. An analytical approach to evaluating efficiency of the clamped-mode soft switching inverter has been developed. The evaluation results are compared with that of the standard pulse-width-modulation (PWM) inverter. A 50-kW induction motor is used as the variable load, and the inverter efficiency is evaluated under different speed and torque conditions. The clamped-mode soft-switching inverter, although eliminating the switching loss, shows poor efficiency over the entire load range. Under low load conditions, the efficiency profile is even worse. The actively clamped resonant dc link inverter shows highest efficiency over the entire speed and torque range. However, its energy saving over the standard PWM inverter is marginal under full load or high speed conditions.

Lai, J.S.; Young, R.W.; McKeever, J.W.

1994-12-31T23:59:59.000Z

310

Parallel 3D Finite Element Numerical Modelling of DC Electron Guns  

SciTech Connect (OSTI)

In this paper we present Gun3P, a parallel 3D finite element application that the Advanced Computations Department at the Stanford Linear Accelerator Center is developing for the analysis of beam formation in DC guns and beam transport in klystrons. Gun3P is targeted specially to complex geometries that cannot be described by 2D models and cannot be easily handled by finite difference discretizations. Its parallel capability allows simulations with more accuracy and less processing time than packages currently available. We present simulation results for the L-band Sheet Beam Klystron DC gun, in which case Gun3P is able to reduce simulation time from days to some hours.

Prudencio, E.; Candel, A.; Ge, L.; Kabel, A.; Ko, K.; Lee, L.; Li, Z.; Ng, C.; Schussman, G.; /SLAC

2008-02-04T23:59:59.000Z

311

DC-like Phase Space Manipulation and Particle Acceleration Using Chirped AC Fields  

SciTech Connect (OSTI)

Waves in plasmas can accelerate particles that are resonant with the wave. A DC electric field also accelerates particles, but without a resonance discrimination, which makes the acceleration mechanism profoundly different. We investigate the effect on a Hamiltonian distribution of an accelerating potential waveform, which could, for example, represent the average ponderomotive effect of two counterpropagating electromagnetic waves. In particular, we examine the apparent DC-like time-asymptotic response of the distribution in regimes where the potential structure is accelerated adiabatically. A highly resonant population within the distribution is always present, and we characterize its nonadiabatic response during wave-particle resonance using an integral method in the noninertial reference frame moving with the wave. Finally, we show that in the limit of infinitely slow acceleration of the wave, these highly resonant particles disappear and the response

P.F. Schmit and N.J. Fisch

2009-06-17T23:59:59.000Z

312

Method of measuring the dc electric field and other tokamak parameters  

DOE Patents [OSTI]

A method including externally imposing an impulsive momentum-space flux to perturb hot tokamak electrons thereby producing a transient synchrotron radiation signal, in frequency-time space, and the inference, using very fast algorithms, of plasma parameters including the effective ion charge state Z.sub.eff, the direction of the magnetic field, and the position and width in velocity space of the impulsive momentum-space flux, and, in particular, the dc toroidal electric field.

Fisch, Nathaniel J. (Princeton, NJ); Kirtz, Arnold H. (Princeton Junction, NJ)

1992-01-01T23:59:59.000Z

313

Round-robin artificial contamination test on high voltage dc insulators  

SciTech Connect (OSTI)

This paper summarizes the results of a worldwide round-robin test of high voltage dc (HVDC) insulators, which was carried out in six laboratories aiming at standardization of the method for artificial contamination tests on HVDC insulators. Flashover characteristics of three kinds of specimens were evaluated by the clean fog and the salt fog procedures. Sufficient information is now available to allow the preparation of provisional international specifications for artificial contamination testing of HVDC insulators.

Naito, K.; Schneider, H.M.

1995-07-01T23:59:59.000Z

314

Development studies of a solid-state d.c. circuit breaker based on the GTO  

E-Print Network [OSTI]

Circuit Breaker . . . . . 37 D. Metal-Oxide Varistors in DC Circuit Breaker Applications 42 E. Variable Resistor Characteristics Implemented with a Semiconductor Device . . . . . . . . . . . 43 VI CAPACITIVE CIRCUIT BREAKER 45 VII SWITCHED SNUBBER... maintenance rate and low reliability. The separation of contacts under load draws an electric arc at a relatively high d. c. voltage which serves to dissipate the circuit stored energy. Because of this, the metal contacts suffer from pitting and erosion...

Kernaghan, William Henry

1986-01-01T23:59:59.000Z

315

Method and apparatus for generating radiation utilizing DC to AC conversion with a conductive front  

DOE Patents [OSTI]

Method and apparatus for generating radiation of high power, variable duration and broad tunability over several orders of magnitude from a laser-ionized gas-filled capacitor array. The method and apparatus convert a DC electric field pattern into a coherent electromagnetic wave train when a relativistic ionization front passes between the capacitor plates. The frequency and duration of the radiation is controlled by the gas pressure and capacitor spacing.

Dawson, John M. (Pacific Palisades, CA); Mori, Warren B. (Hermosa Beach, CA); Lai, Chih-Hsiang (So. Pasadena, CA); Katsouleas, Thomas C. (Malibu, CA)

1998-01-01T23:59:59.000Z

316

Method and apparatus for generating radiation utilizing DC to AC conversion with a conductive front  

DOE Patents [OSTI]

Method and apparatus ar disclosed for generating radiation of high power, variable duration and broad tunability over several orders of magnitude from a laser-ionized gas-filled capacitor array. The method and apparatus convert a DC electric field pattern into a coherent electromagnetic wave train when a relativistic ionization front passes between the capacitor plates. The frequency and duration of the radiation is controlled by the gas pressure and capacitor spacing. 4 figs.

Dawson, J.M.; Mori, W.B.; Lai, C.H.; Katsouleas, T.C.

1998-07-14T23:59:59.000Z

317

DC WRRC Report No. 76 Assessment of the Impact of Non-Point Source Pollution on the Anacostia River  

E-Print Network [OSTI]

Model for Urban Water Quality (AMUWQ, Geological Survey, through the D.C. Water Resources Research Center." "The Contents of the publication do of trade names or commercial products constitute their endorsement by the United States Government." #12

District of Columbia, University of the

318

Residential Energy Efficiency Research Planning Meeting Summary Report: Washington, D.C. - October 27-28, 2011  

SciTech Connect (OSTI)

This report summarizes key findings and outcomes from the U.S. Department of Energy's Building America Residential Energy Efficiency Research Planning meeting, held on October 28-29, 2011, in Washington, D.C.

Not Available

2012-02-01T23:59:59.000Z

319

Quantitative study of macroscopic quantum tunneling in a dc SQUID: A system with two degrees of freedom  

E-Print Network [OSTI]

To test whether the theory of macroscopic quantum tunneling (MQT) is applicable to systems with 2 degrees of freedom, we experimentally investigated the switching current distribution of a dc SQUID. Using sample parameters determined from...

Li, Shaoxiong; Yu, Yang; Zhang, Y.; Qiu, W.; Han, Siyuan; Wang, Z.

2002-08-01T23:59:59.000Z

320

Vehicle Technologies Office Merit Review 2014: DC Fast Charging Effects on Battery Life and EVSE Efficiency and Security Testing  

Broader source: Energy.gov [DOE]

Presentation given by Idaho National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about DC fast charging...

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

A High Frequency Isolated Current-fed Bidirectional DC/AC Converter For Grid-Tied Energy Storage System  

E-Print Network [OSTI]

tied energy storage systems (ESS) will be voltage to a high-DC/AC converter to interface ESS based on low voltage cellscharging and discharging of the ESS and the control strategy

King Jet, TSENG

2013-01-01T23:59:59.000Z

322

Hardware model of a shipboard zonal electrical distribution system (ZEDS) : alternating current/direct current (AC/DC)  

E-Print Network [OSTI]

A hardware model of a shipboard electrical distribution system based on aspects of the DDG 51 Flight IIA, Arleigh Burke class, 60Hz Alternating Current (AC) and the future direct current (DC), zonal electrical distribution ...

Tidd, Chad N. (Chad Norman)

2010-01-01T23:59:59.000Z

323

A Generalized Class of Stationary Frame-Current Controllers for Grid-Connected AC–DC Converters  

E-Print Network [OSTI]

Within power systems, high-power pulsewidth-modulated ac-dc converters are used in flexible ac transmission systems controllers and for interfacing renewable energy sources to the grid. These converters traditionally ...

Hwang, J. George

324

Design and performance evaluation of an electric go-kart and custom permanent magnet brushless DC motor  

E-Print Network [OSTI]

This undergraduate thesis documents the design considerations and specifications of building a personal battery-powered go-kart. This includes designing and building a custom brushless DC motor for use in the drivetrain. ...

Davis, Eli Marc

2012-01-01T23:59:59.000Z

325

The design of a hybrid DC motor/SMA actuated robotic hand based on physiological and anatomical synergies  

E-Print Network [OSTI]

A new approach to the design and control of multi-fingered hands using hybrid DC motor-Shape Memory Alloy (SMA) array actuators is presented in this thesis. The fundamental design concept is based on the principle of motor ...

Rosmarin, Josiah Benjamin

2008-01-01T23:59:59.000Z

326

Weatherization Program is a Capital Idea for Washington, D.C.: Weatherization Assistance Close-Up Fact Sheet  

SciTech Connect (OSTI)

Washington, D.C. demonstrates its commitment to technology and efficiency through the Weatherization Program. Weatherization uses advanced technologies and techniques to reduce energy costs for low-income families by increasing the energy efficiency of their homes.

D& R International

2001-10-10T23:59:59.000Z

327

232 IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 17, NO. 2, MARCH 2002 Current Control Strategy for Brushless DC Motors  

E-Print Network [OSTI]

synchronous motor (PMSM), which is fed with sinusoidal currents 2) brushless dc motor (BDCM), which is fed, the power-to-weight ratio of PMSM and BDCM is higher than equivalent squirrel cage induction machines

Catholic University of Chile (Universidad Católica de Chile)

328

Data:20897232-72c1-4dc1-a001-d1b55c0dc4f8 | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of48d9ff47edf3 No revision5af6d400c2d No529a57c00c0 Noe-ed85d9cb7f6f No revision has beenb5a1c645bb55c0dc4f8 No

329

DOE - Office of Legacy Management -- Middlesex North NJ Site - NJ 05  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are here HomeGunnison-EngineerSelling

330

DOE - Office of Legacy Management -- Standard Oil Development Co of NJ - NJ  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou areDowntown Site - MO 02 FUSRAP Considered

331

WASHINGTON. DC.  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545 OCTTO:March 20, 1995 W.Eyergy

332

Washington, DC'  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545 OCTTO:March 20, 1995WOCESSORS MODWQl .of.

333

High-gain dc SQUID magnetometers with NbN nanobridges  

SciTech Connect (OSTI)

This paper reports on high-gain dc SQUIDs using NbN nanobridges fabricated for magnetometers with high sensitivity, and their device parameters and intrinsic energy sensitivity have been evaluated. The slit inductance of the square washer SQUID was reduced by using the co-planar edge structure of the low inductance. The junction capacitance was typically 15 {approximately} 40 ft. The maximum voltage modualtion was about 110 {mu}V for the NbN nanobridge SQUID with an inductance of 0.18nH.

Irie, A.; Hamasaki, K.; Yamashita, T. (Dept. of Electronics, Nagaoka Univ. of Technology, Kamitomioka-Machi 1603-1, Nagoka-shi, Niigata 940-21 (JP)); Matsui, T.; Komiyama, B. (Communication Research Lab., Ministry of Posts and Telecommunication, Koganei, Tokyo 184 (JP))

1991-03-01T23:59:59.000Z

334

Use of Facility Contractor Employees for Services to DOE in the Washington, D.C., Area  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To clarify and modify policies and procedures for management of Department of Energy (DOE) facility contractor employees located in the Washington, D.C., area. A facility contractor employee is any employee of either a contractor responsible for managing a Department-owned facility, such as a National Laboratory, or a subcontractor of such a contractor. Facility contractor means any contractor performing under a Management and Operating (M&O), Management and Integration (M&I), or Environmental Restoration Management Contractor (ERMC) contract awarded by a DOE contracting officer. Canceled by DOE O 350.2.

1999-04-15T23:59:59.000Z

335

Long range temporal correlation in the chaotic oscillations of a dc glow discharge plasma  

SciTech Connect (OSTI)

Long range temporal correlations in the fluctuations of the plasma floating potentials (measured using a Langmuir probe) are investigated in a dc glow discharge plasma. Keeping the neutral pressure constant, the discharge voltage was varied and at the formation of the plasma, quasi periodic oscillations were excited and on further increase of the discharge voltage they became chaotic (irregular) beyond a threshold voltage. We compared the Lyapunov exponent with the Hurst exponent obtained from R/S statistics which showed an opposite behaviour at the transition point. These results are perhaps new since we have not come across such comparative analysis for chaotic oscillations in a glow discharge plasma before.

Lahiri, S. [Dinabandhu Mahavidyalaya, Bongaon, North 24 Parganas, Kolkata 743235 (India); Roychowdhury, D. [Techno India, EM4/1 Sector V, Salt Lake, Kolkata 700091 (India); Sekar Iyengar, A. N. [Plasma Physics Division, Saha Institute of Nuclear Physics, 1/AF Bidhannagar, Kolkata 700064 (India)

2012-08-15T23:59:59.000Z

336

DC CICC retrofit magnet preliminary design, protection analysis, and software development. Final report  

SciTech Connect (OSTI)

The MIT Plasma Fusion Center magnet technology development effort, in support of the DOE/PETC MHD program, has culminated in two recent innovations which, when combined, will not only improve the reliability of commercial scale MHD magnets but will also reduce their cost by a factor of two. The first of these is a new form of Cable In Conduit Conductor (CICC) designed specifically for large scale DC superconducting magnets and the second is a highly efficient, quasi-momentless force containment which is made possible by the new conductor.

Marston, P.G.

1994-04-28T23:59:59.000Z

337

Demonstration of LED Retrofit Lamps at the Smithsonian American Art Museum, Washington, DC  

SciTech Connect (OSTI)

This report documents observations and results obtained from a lighting demonstration project conducted under the U.S. Department of Energy GATEWAY Solid-State Lighting (SSL) Technology Demonstration Program at the Smithsonain American Art Museum in Washington, DC. LED Lamp samples were tested in the museum workshop, temporarily installed in a gallery for feedback, and ultimately replaced all traditional incandescent lamps in one gallery of modernist art at the American Art Museum and partially replacing lamps in two galleries at the Musesum's Renwick Gallery. This report describes the selection and testing process, technology challenges, perceptions, economics, energy use, and mixed results of usign LED replacement lamps in art galleries housing national treasures.

Miller, Naomi J.; Rosenfeld, Scott M.

2012-06-22T23:59:59.000Z

338

DC superconducting quantum interference device usable in nuclear quadrupole resonance and zero field nuclear magnetic spectrometers  

DOE Patents [OSTI]

A spectrometer for measuring the nuclear quadrupole resonance spectra or the zero-field nuclear magnetic resonance spectra generated by a sample is disclosed. The spectrometer uses an amplifier having a dc SQUID operating in a flux-locked loop for generating an amplified output as a function of the intensity of the signal generated by the sample. The flux-locked loop circuit includes an integrator. The amplifier also includes means for preventing the integrator from being driven into saturation. As a result, the time for the flux-locked loop to recover from the excitation pulses generated by the spectrometer is reduced. 7 figures.

Fan, N.Q.; Clarke, J.

1993-10-19T23:59:59.000Z

339

DC superconducting quantum interference device usable in nuclear quadrupole resonance and zero field nuclear magnetic spectrometers  

DOE Patents [OSTI]

A spectrometer for measuring the nuclear quadrupole resonance spectra or the zero-field nuclear magnetic resonance spectra generated by a sample is disclosed. The spectrometer uses an amplifier having a dc SQUID operating in a flux-locked loop for generating an amplified output as a function of the intensity of the signal generated by the sample. The flux-locked loop circuit includes an integrator. The amplifier also includes means for preventing the integrator from being driven into saturation. As a result, the time for the flux-locked loop to recover from the excitation pulses generated by the spectrometer is reduced.

Fan, Non Q. (San Diego, CA); Clarke, John (Berkeley, CA)

1993-01-01T23:59:59.000Z

340

Washington DC Regions | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched5 IndustrialIsadoreConnecticutPhotos of AECSign UpWashington DC Regions National

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

BERAC Meeting April 20-21, 2005 Washington DC | U.S. DOE Office of Science  

Office of Science (SC) Website

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched5 IndustrialIsadore Perlman,BiosScience(SC) April 20-21, 2005 Washington DC

342

VA-MD-DC Hydrogen Education for Decision Makers | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of EnergyTheTwoVulnerabilities | Department of Energy 5:VA4-BVA-MD-DC

343

Devil's staircase, spontaneous-DC bias, and chaos via quasiperiodic plasma oscillations in semiconductor superlattices  

E-Print Network [OSTI]

We study a plasma instability in semiconductor superlattices irradiated by a monochromatic, pure AC electric field. The instability leads to sustained oscillations at a frequency \\omega 2 that is either incommensurate to the drive, or frequency-locked to it, \\omega 2 = (p/q) \\omega. A spontaneously generated DC bias is found when either p or q in the locking ratio are even integers. Frequency locked regions form Arnol'd tongues in parameter space and the ratio \\omega 2 / \\omega\\ exhibits a Devil's staircase. A transition to chaotic motion is observed as resonances overlap.

Jukka Isohätälä; Kirill N. Alekseev

2012-01-30T23:59:59.000Z

344

Drive laser system for the DC-SRF photoinjector at Peking University  

E-Print Network [OSTI]

Photoinjectors are widely used for linear accelerators as electron sources to generate high-brightness electron beam. Drive laser, which determines the timing structure and quality of the electron beam, is a crucial device of photoinjector. A new drive laser system has been designed and constructed for the upgraded 3.5-cell DC-SRF photoinjector at Peking University. The drive laser system consists of a 1064 nm laser oscillator, a four- stage amplifier, the second and fourth harmonic generators, the optical system to transfer the UV pulses to the photocathode, and the synchronization system. The drive laser system has been successfully applied in the stable operation of DC-SRF photoinjector and its performance meets the requirements. 266 nm laser with an average power close to 1W can be delivered to illuminate the Cs2Te photocathode and the instability is less than 5% for long time operation. The design consideration for improving the UV laser quality, a detailed description of laser system, and its performanc...

Wang, Zhiwen; Lin, Lin; Zhao, Gang; Quan, Shengwen; Liu, Kexin; Chen, Jiaer

2015-01-01T23:59:59.000Z

345

The 100,000 amp dc power supply for a staged hadron collider superferric magnet  

SciTech Connect (OSTI)

A 1.5 volt 100,000 amp DC switcher power supply was developed for testing a superferric magnet string at FNAL. This supply was used during testing as both the ramping supply and holding supply powering a single magnet load with a total load resistance of 0.7{micro} Ohms. The supply consists of ten paralleled switcher cells, powered by a 400 volt/600 Amp DC power supply. Each cell consists of an IGBT H-bridge driving a step-down transformer at a switching frequency of 2 kHz. The transformer has an effective turns ratio of 224:1. The secondary consists of 32 parallel single-turn full wave rectifier windings. The rectification is done with 64 Shottky diodes. Each cell is rated at 1.5 volts/10,000 amps. During this test each cell was operated as a constant power source without load current or field feedback. This paper will describe the design of the switcher cell and control system used during testing. We will also describe the next level of improvements to the current feedback system to improve the ramp control.

Hays, Steven L.; Claypool, Bradley; Foster, G.William; /Fermilab

2005-09-01T23:59:59.000Z

346

Frequency multiplexed flux locked loop architecture providing an array of DC SQUIDS having both shared and unshared components  

DOE Patents [OSTI]

Architecture for frequency multiplexing multiple flux locked loops in a system comprising an array of DC SQUID sensors. The architecture involves dividing the traditional flux locked loop into multiple unshared components and a single shared component which, in operation, form a complete flux locked loop relative to each DC SQUID sensor. Each unshared flux locked loop component operates on a different flux modulation frequency. The architecture of the present invention allows a reduction from 2N to N+1 in the number of connections between the cryogenic DC SQUID sensors and their associated room temperature flux locked loops. Furthermore, the 1.times.N architecture of the present invention can be paralleled to form an M.times.N array architecture without increasing the required number of flux modulation frequencies.

Ganther, Jr., Kenneth R. (Olathe, KS); Snapp, Lowell D. (Independence, MO)

2002-01-01T23:59:59.000Z

347

Abstract--In this paper, the authors present the modelling of the impedance variation of an inverter DC bus. Modelling is  

E-Print Network [OSTI]

an analysis of the inverter DC bus in order to develop a new diagnostic method by the elec- tromagnetic field of an inverter DC bus. Modelling is done by application of the PEEC method (Partial Element Equivalent Circuit measurement [1]. Actually, the power of the electrical drives flows through the bus-bar, for this rea- son

Boyer, Edmond

348

Dynamics of Poisson-Nernst-Planck systems and applications to ionic channels  

E-Print Network [OSTI]

T 2 ln (( 1?? j ? x?ri+r j x?ri?r j c j(x ?)dx? )( 1?? j ? x+ri+r j x+ri?r j c j(x ?)dx? )) + kT 2 ? x+ri x?ri ? j(c j(x ?? r j)+ c j(x?+ r j)) 1?? j ? x?+r j x??r j c j(x??)dx?? dx?. (2.8) Now we derive the local model 1 kT µLHSi (x) =? ln ( 1? n ? j...=1 d jc j(x) ) + di?nj=1 c j(x) 1??nj=1 d jc j(x) , (2.9) 10 where d j is the diameter of the jth ion species. This local model is studied in Chapter 5. For the first term in (2.8), ln (( 1?? j ? x?ri+r j x?ri?r j c j(x ?)dx? )( 1?? j ? x+ri+r j x+ri...

Zhang, Mingji

2013-08-31T23:59:59.000Z

349

Meeting Summary Advanced Light Water Reactor Fuels Industry Meeting Washington DC October 27 - 28, 2011  

SciTech Connect (OSTI)

The Advanced LWR Fuel Working Group first met in November of 2010 with the objective of looking 20 years ahead to the role that advanced fuels could play in improving light water reactor technology, such as waste reduction and economics. When the group met again in March 2011, the Fukushima incident was still unfolding. After the March meeting, the focus of the program changed to determining what we could do in the near term to improve fuel accident tolerance. Any discussion of fuels with enhanced accident tolerance will likely need to consider an advanced light water reactor with enhanced accident tolerance, along with the fuel. The Advanced LWR Fuel Working Group met in Washington D.C. on October 72-18, 2011 to continue discussions on this important topic.

Not Listed

2011-11-01T23:59:59.000Z

350

Experimental results from a DC photocathode electron gun for an IR FEL  

SciTech Connect (OSTI)

A 350 keV DC photocathode gun capable of delivering the high-brightness CW electron beam necessary for Jefferson Lab`s infrared free-electron laser is described. The gun is to be used with a superconducting radiofrequency linac operating at 1.497 GHz and is mode-locked to the 40th subharmonic of the fundamental using a Nd:YLF drive laser. The gun provides 20--25 ps bunches at up to 135 pC/bunch. Experimental measurements of transverse and longitudinal beam properties are presented. Transverse emittance is measured using a slit-wire scanner emittance meter, and energy spread is measured using the slit and a spectrometer magnet. Longitudinal emittance is measured using a combination of sampling aperture, kicker cavity, slit and spectrometer. Measurements for bunch charges of 135 pC are described and compared with simulations.

Kehne, D.; Engwall, D.; Legg, R.; Shinn, M.

1997-10-01T23:59:59.000Z

351

Modeling a short dc discharge with thermionic cathode and auxiliary anode  

SciTech Connect (OSTI)

A short dc discharge with a thermionic cathode can be used as a current and voltage stabilizer, but is subject to current oscillation. If instead of one anode two anodes are used, the current oscillations can be reduced. We have developed a kinetic model of such a discharge with two anodes, where the primary anode has a small opening for passing a fraction of the discharge current to an auxiliary anode. The model demonstrates that the current-voltage relationship of the discharge with two anodes is characterized everywhere by positive slope, i.e., positive differential resistance. Therefore, the discharge with two anodes is expected to be stable to the spontaneous oscillation in current that is induced by negative differential resistance. As a result, such a discharge can be used in an engineering application that requires stable plasma, such as a current and voltage stabilizer.

Bogdanov, E. [St. Petersburg State University, St. Petersburg 199034 (Russian Federation) [St. Petersburg State University, St. Petersburg 199034 (Russian Federation); University ITMO, Kronverkskiy pr. 49, St. Petersburg 197101 (Russian Federation); Demidov, V. I. [St. Petersburg State University, St. Petersburg 199034 (Russian Federation) [St. Petersburg State University, St. Petersburg 199034 (Russian Federation); West Virginia University, Morgantown, West Virginia 26506 (United States); Kaganovich, I. D. [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States)] [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States); Koepke, M. E. [West Virginia University, Morgantown, West Virginia 26506 (United States)] [West Virginia University, Morgantown, West Virginia 26506 (United States); Kudryavtsev, A. A. [St. Petersburg State University, St. Petersburg 199034 (Russian Federation)] [St. Petersburg State University, St. Petersburg 199034 (Russian Federation)

2013-10-15T23:59:59.000Z

352

November 18, 2008 1 Abstract--In this paper, we analyze the N-1 reliable DC optimal  

E-Print Network [OSTI]

of the transmission element (line or transformer) and the model can be used for planning and/or operations. We or transformer) g: generator d: load c: operating state; c = 0 indicates the no contingency state (steady- stateNovember 18, 2008 1 Abstract--In this paper, we analyze the N-1 reliable DC optimal dispatch

Ferris, Michael C.

353

In Proc of Direct Methanol Fuel Cell Symposium, 199th Electrochem.l Soc. Mtg, Washington DC, 3/01.  

E-Print Network [OSTI]

In Proc of Direct Methanol Fuel Cell Symposium, 199th Electrochem.l Soc. Mtg, Washington DC, 3/01. MATHEMATICAL MODELING OF LIQUID-FEED DIRECT METHANOL FUEL CELLS Z. H. Wang and C. Y. Wang Electrochemical methanol fuel cells (DMFC). Diffusion and convection of both gas and liquid phases are considered

Wang, Chao-Yang

354

Ver.2003.01.27 Development of Low-Voltage and Large-Current DC Power Supply  

E-Print Network [OSTI]

-4000A 1kHz 1kHz 940-2188 1603-1 Nagaoka University of Technology 1603-1 Kamitomioka, Nagaoka : 1 4 13V-5000A Fig. 4. Cross section diagram of high-frequency step down transformer of 13V-5000A DC

Fujimoto, Hiroshi

355

falls into this category if the PV DC conductors penetrate the house. Although batteries are not power generators,  

E-Print Network [OSTI]

falls into this category if the PV DC conductors penetrate the house. Although batteries-grid, battery-based PV systems or grid-tied (utility-interactive) PV systems with battery backup. In situations are not power generators, they can source energy, so a battery disconnect might also fall into this category

Johnson, Eric E.

356

A new approach to modelling the impact of EMI on MOSFET DC behaviour R. Fernndez-Garca, 1  

E-Print Network [OSTI]

the DC MOSFET behaviour under electromagnetic interference (EMI) is presented. The model is able-power law directly applied to a MOSFET under EMI impact. KEYWORDS: MOSFET, Electromagnetic Interference (EMI: Electronic systems are disturbed by electromagnetic interference (EMI) which can potentially disrupt

Paris-Sud XI, Université de

357

Abscisic acid-dependent and -independent expression of the carrot LEA class gene Dc3 in transgenic tobacco seedlings  

E-Print Network [OSTI]

We studied the expression of three promoter deletion mutants (A218, A599, and A1312) of the Late Embryo Abundant (LEA) class gene Dc3 fused to the reporter gene, B-glucuronidase (GUS) in 14 d old transgenic tobacco seedlings. Seedlings were...

Siddiqui, Najeeb Ullah

1997-01-01T23:59:59.000Z

358

For presentation at the Fuel Cell Projects Kickoff Meeting, DOE Headquarters, Washington DC, September 30 October 1, 2009.  

E-Print Network [OSTI]

the commercialization of fuel cell technology. · The validated transport model can be employed to improve and optimize1 For presentation at the Fuel Cell Projects Kickoff Meeting, DOE Headquarters, Washington DC Fuel Cells Fuel Cell Projects Kickoff Meeting September 30 - October 1, 2009 Presented by: Ken S

359

Novel Insights into Lossless AC and DC Power Flow Florian Dorfler, Student Member, IEEE, and Francesco Bullo, Fellow, IEEE  

E-Print Network [OSTI]

1 Novel Insights into Lossless AC and DC Power Flow Florian D¨orfler, Student Member, IEEE work supported by NSF grant CPS- 1135819. Florian D¨orfler and Francesco Bullo are with the Center 93106. Email: {dorfler,bullo}@engineering.ucsb.edu approximation only near an operating point with small

Bullo, Francesco

360

COMPLETELY DC-FREE DIRECT SEQUENCE SPECTRUM SPREADING SCHEME FOR LOW POWER, LOW COST, DIRECT CONVERSION TRANSCEIVER  

E-Print Network [OSTI]

call the offset code spreading scheme. By employing the scheme, we can implement a direct- conversion- level design. The direct conversion receiver architecture combined with D-BPSK (differential, there are some design problems. In a direct conversion receiver, DC offset due to carrier leakage and 1/f mixer

Lee, Thomas H.

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Wiring design based on Global Energy Requirement criteria: a first step towards optimization of DC distribution voltage  

E-Print Network [OSTI]

optimization methodology based on the primary energy environmental impact 2.1. The Global Energy RequirementWiring design based on Global Energy Requirement criteria: a first step towards optimization of DC. Introduction Nowadays, the global energy context leads to a need for the development of distributed Renewable

Paris-Sud XI, Université de

362

Superconductivity for Electric Systems Annual Peer Review Washington, DC July 27-29, 2004 University of Wisconsin-Madison  

E-Print Network [OSTI]

1 Superconductivity for Electric Systems Annual Peer Review Washington, DC July 27-29, 2004. Gurevich, D. C. Larbalestier Industrial partner: American Superconductor Corporation Funding: ORNL: 225 k$ (DOE) LANL: 200 k$ (DOE) UW: 200 k$ (DOE, AFOSR-MURI) #12;2 Superconductivity for Electric Systems

363

Superconductivity for Electric Systems Annual Peer Review Washington, DC July 23-25, 2003 OAK RIDGE NATIONAL LABORATORY  

E-Print Network [OSTI]

Superconductivity for Electric Systems Annual Peer Review Washington, DC ­ July 23-25, 2003 OAK RIDGE NATIONAL LABORATORY U. S. DEPARTMENT OF ENERGY American Superconductor Corporation M. W. Rupich, D-in ORNL-AMSC CRADA: Development of 2G YBCO-RABiTS Wires #12;Superconductivity for Electric Systems Annual

364

A three-level buck converter to regulate a high-voltage DC-to-AC inverter  

E-Print Network [OSTI]

A three-level buck converter is designed and analyzed, and shown to be suitable as a high-voltage down converter as a pre-regulation stage for a 600 watt DC-to-AC power inverter. Topology selection for the inverter is ...

Schrock, Kenneth C

2008-01-01T23:59:59.000Z

365

650 IEEE TRANSACTIONS ON POWER DELIVERY, VOL. 26, NO. 2, APRIL 2011 Hourly Scheduling of DC Transmission Lines in  

E-Print Network [OSTI]

Transmission Lines in SCUC With Voltage Source Converters Azim Lotfjou, Mohammad Shahidehpour, Fellow, IEEE transmission lines, se- curity-constrained unit commitment, voltage-source converters. NOMENCLATURE Index of ac;LOTFJOU et al.: HOURLY SCHEDULING OF DC TRANSMISSION LINES 651 , Vector of real and reactive power

Fu, Yong

366

Improvement of power supply EMC by chaos J.H.B. Deane and D.C. Hamill  

E-Print Network [OSTI]

Improvement of power supply EMC by chaos J.H.B. Deane and D.C. Hamill Department of Electronic is spread, its peaks are reduced and EMC is improved, compared to the case when the circuit is operating consisting of the switching frequency and many harmonics. Such interference poses significant EMC problems

Deane, Jonathan

367

TRANSVERSE AEOLIAN RIDGES ON MARS: DISTRIBUTION, ORIENTATIONS, AND AGES. D.C. , M.R. Balme1  

E-Print Network [OSTI]

TRANSVERSE AEOLIAN RIDGES ON MARS: DISTRIBUTION, ORIENTATIONS, AND AGES. D.C. Berman1 , M.R. Balme1 , M.C. Bourke1 , S. Rafkin3 , and J.R. Zimbelman2 , 1 Planetary Science Institute, 1700 E. Ft. Lowell' [1]. Figure 1. Percent areal coverage of TARs in MOC images for northern hemisphere. White dots

Bourke, Mary C.

368

MAGNETIC COUPLING BETWEEN DC TACHOMETER AND MOTOR AND ITS EFFECT ON MOTION CONTROL IN THE PRESENCE OF  

E-Print Network [OSTI]

orientations of the motor and tachometer permanent magnets......21 Fig. 4.5(b) Motor and Tachometer fieldsMAGNETIC COUPLING BETWEEN DC TACHOMETER AND MOTOR AND ITS EFFECT ON MOTION CONTROL IN THE PRESENCE OF SHAFT COMPLIANCE by Shorya Awtar A Thesis Submitted to the Graduate Faculty of Rensselaer Polytechnic

Awtar, Shorya

369

Essential Oil of Dyssodia acerosa DC. Mario R. Tellez,* Rick E. Estell, Ed L. Fredrickson, and Kris M. Havstad  

E-Print Network [OSTI]

Mexico, and GC/MS and retention indices were used to identify 62 components from the steam-distilled oilEssential Oil of Dyssodia acerosa DC. Mario R. Tellez,* Rick E. Estell, Ed L. Fredrickson, and Kris, P.O. Box 30003, MSC 3JER, New Mexico State University, Las Cruces, New Mexico 88003 Samples

370

National Museum of the American Indian Museum Stores Washington, D.C. & New York Vendor Product Proposal  

E-Print Network [OSTI]

National Museum of the American Indian Museum Stores Washington, D.C. & New York Vendor Product Proposal Submission to Museum Stores National Museum of the American Indian (NMAI) Our Museum Stores your craft for sale in our Museum Stores, vendor shall be responsible for complying with all applicable

Mathis, Wayne N.

371

National Museum of the American Indian Museum Stores Washington, D.C. & New York Vendor Product Proposal/ Jewelry  

E-Print Network [OSTI]

National Museum of the American Indian Museum Stores Washington, D.C. & New York Vendor Product Proposal/ Jewelry Submission to Museum Stores National Museum of the American Indian (NMAI) Our Museum Institution your craft for sale in our Museum Stores, vendor shall be responsible for complying with all

Mathis, Wayne N.

372

National Museum of the American Indian Museum Stores Washington, D.C. & New York Vendor Product Proposal/Books & Media  

E-Print Network [OSTI]

National Museum of the American Indian Museum Stores Washington, D.C. & New York Vendor Product Proposal/Books & Media Submission to Museum Stores National Museum of the American Indian (NMAI) Our Museum Institution your craft for sale in our Museum Stores, vendor shall be responsible for complying with all

Mathis, Wayne N.

373

Ya ri a bsod Collection 4  

E-Print Network [OSTI]

????????????????????????? Genre or type (i.e. epic, song, ritual) Persuade Song ??? ??????????????? Name of recorder (if different from collector) Date of recording February 2007 ????? ?????????????????????????? Place of recording A skyid Village, A skyid Township... of performer(s) E kho, 72, female, A skyid Township, Mdzo dge County, Rnga ba Tibetan and Qiang Autonomous Prefecture, Sichuan Province. ??,?????????????????????????? ?? ?????? ???? ??? ??????????????????????????????????...

Sha bo don 'grub rdo rje; Skal dbang skyid

374

Ya ri a bsod Collection 6  

E-Print Network [OSTI]

?????????????????????????????????? ?????????? Genre or type (i.e. epic, song, ritual) Paean ?? ?????? Name of recorder (if different from collector) Date of recording February 2007 ????? ?????????????????????????? Place of recording...

Sha bo don 'grub rdo rje; Skal dbang skyid

375

Ya ri a bsod Collection 7  

E-Print Network [OSTI]

??????????????? ???????????? ????????????????????????????????????????????????????????????????????????? ?????????????????????????????????????????????????????? Genre or type (i.e. epic, song, ritual) Paean ?? ?????? Name...

Sha bo don 'grub rdo rje; Skal dbang skyid

376

&RQFHSWXDO 0RGHOLQJ DQG &RPSRVLWLRQ RI  

E-Print Network [OSTI]

efficiently. Organizational processes cover business processes and work processes. Organizational resources providing organizational UHVRXUFHV to organizational SURFHVVHV in order to have them performed more comprise human beings as organizational actors, but also information, tools and representations

377

Category:Providence, RI | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectricEnergyCTBarreis aCallahanWind FarmAdd aMinutesMapPlaces Jump to:OR

378

Thng 9, 2011 Xu t b n b i O ce of International A airs M i thng tin trong t ri ny u c trn m ng. c thng tin chi ti t v c p nh t, xin vui lng  

E-Print Network [OSTI]

Tháng 9, 2011 Xu t b n b i O ce of International A airs M i thông tin trong t ri này u có trên m ng. có thông tin chi ti t và c p nh t, xin vui lòng tra c u t i website c a chúng tôi : httpThông tin nhanh NTU, tr ng i h c t ng h p l n nh t và lâu i nh t ài Loan, ã thông báo các chng trình ào

Wu, Yih-Min

379

Analysis of dc harmonics using the three-pulse model for the intermountain power project HVDC transmission  

SciTech Connect (OSTI)

The harmonic analysis of the dc-side of an HVDC line transmission requires realistic models of the converters, the dc line, and other relevant equipment. These models must include all important paths for harmonic current, and appropriate sources of harmonic voltage generation. The classical converter modeling technique has been demonstrated to be insufficient in field measurements and analysis of the harmonic spectra found on recent HVDC line transmission. For this reason, a new model of the converter bridge which takes into account the major stray capacitances in the converter (the three-pulse model) has been developed, and is described in detail elsewhere. This paper presents comparisons between the classical and three-pulse calculations for the Intermountain Power Project (IPP) HVDC transmission. The calculation results from the three-pulse model agree favorably with the harmonics found in field measurements.

Dickmander, D.L.; Peterson, K.J.

1989-04-01T23:59:59.000Z

380

Self-consistent modeling of DC and microwave nitrogen discharges and their afterglows  

SciTech Connect (OSTI)

This report presents an investigation on the modeling of stationary DC and microwave nitrogen discharges and their afterglows, operating at pressures around one Torr and ionization degrees between 10-7-10-4. The model is based on the self-consistent solutions to the electron Boltzmann equation coupled to the rate balance equations for the most important neutral and charged species, the wave electrodynamics characteristics and the gas thermal balance equation. The results are obtained as a function of the usual discharge operating parameters, namely gas pressure, discharge current or electron density, and tube radius. It is shown that the vibrationally excited molecules play a central role in the whole problem, ensuring a strong link between different kinetics and directly contributing to the mechanisms of dissociation and gas heating. Furthermore, vibrationally excited molecules in high vibration levels are in the origin of the peaks observed in the flowing afterglow for the concentrations of several species, such as N{sub 2}(A {sup 3}{sigma}{sub g}{sup +}), N2(B 3{pi}g), N{sub 2}{sup +}(B {sup 2}{sigma}{sub u}{sup +}) and electrons, which occur downstream from the discharge after a dark zone as a consequence of the V-V up-pumping mechanism.

Guerra, Vasco [Centro de Fisica dos Plasmas, Instituto Superior Tecnico, 1049-001 Lisbon (Portugal)

2004-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Finite Element Modelling of the Sawing of DC Cast AA2024 Aluminium Alloy Slabs  

SciTech Connect (OSTI)

In the semi-continuous casting of large cross-section rolling sheet ingots of high-strength aluminum alloys (2xxx and 7xxx series), the control of the residual (internal) stresses generated by the non-uniform cooling becomes a necessity. These stresses must be relieved by a thermal treatment before the head and foot of the ingot can be cut. Otherwise, the saw can be caught owing to compressive stresses or cut parts may be ejected thus injuring people or damaging equipment. These high added-value ingots need to be produced in secure conditions. Moreover, a better control of the sawing procedure could allow the suppression of the thermal treatment and therefore save time and energy. By studying the stress build-up during casting and the stress relief during sawing, key parameters for the control and optimization of the processing steps, can be derived. To do so, the direct chill (DC) casting of the AA2024 alloy is modeled with ABAQUS 6.5 with special attention to the thermo-mechanical properties of the alloy. The sawing operation is then simulated by removing mesh elements so as to reproduce the progression of the saw in the ingot. Preliminary results showing the stress relief during sawing accompanied by the risk of saw blocking due to compression or initiating a crack ahead of the saw, are analyzed with an approach based on the rate of strain energy release.

Drezet, J.-M. [Computational Materials Laboratory, School of Engineering, Ecole Polytechnique Federale de Lausanne, Station 12, CH-1015 Lausanne (Switzerland); Ludwig, O. [Calcom-ESI SA, PSE-A, CH-1015 Lausanne (Switzerland); Heinrich, B. [Alcan Aluminium Valais SA, CH3960 Sierre (Switzerland)

2007-04-07T23:59:59.000Z

382

Studies on optoelectronic properties of DC reactive magnetron sputtered CdTe thin films  

SciTech Connect (OSTI)

Cadmium telluride continues to be a leading candidate for the development of cost effective photovoltaics for terrestrial applications. In the present work two individual metallic targets of Cd and Te were used for the deposition of CdTe thin films on mica substrates from room temperature to 300 °C by DC reactive magnetron sputtering method. XRD patterns of CdTe thin films deposited on mica substrates exhibit peaks at 2? = 27.7°, 46.1° and 54.6°, which corresponds to reflection on (1 1 1), (2 2 0) and (3 1 1) planes of CdTe cubic structure. The intensities of XRD patterns increases with the increase of substrate temperature upto 150 °C and then it decreases at higher substrate temperatures. The conductivity of CdTe thin films measured from four probe method increases with the increase of substrate temperature. The activation energies (?E) are found to be decrease with the increase of substrate temperature. The optical transmittance spectra of CdTe thin films deposited on mica have a clear interference pattern in the longer wavelength region. The films have good transparency (T > 85 %) exhibiting interference pattern in the spectral region between 1200 – 2500 nm. The optical band gap of CdTe thin films are found to be in the range of 1.48 – 1.57. The refractive index, n decreases with the increase of wavelength, ?. The value of n and k increases with the increase of substrate temperature.

Kumar, B. Rajesh, E-mail: rajphyind@gmail.com [Department of Physics, Sri Venkateswara University, Tirupati - 517 502, A.P, India and Department of Physics, Sri Krishnadevaraya University, Anantapur - 515 003, A.P (India); Hymavathi, B.; Rao, T. Subba [Department of Physics, Sri Krishnadevaraya University, Anantapur - 515 003, A.P (India)

2014-01-28T23:59:59.000Z

383

PM brushless DC motor drive with a new power converter topology  

SciTech Connect (OSTI)

With the growing potential for widespread use of permanent magnet brushless dc motor drives (hereafter referred to as PMBDC drives) in many low-cost applications such as in hvac, refrigerators, and freezers in houses and small velocity servos in process industries, it has become important to minimize the cost. One obvious place for cost reduction is in the cost of the inverter and its associated controller. With that perspective, a novel application of the converter topology for the PMBDC known as C-dump in the switched reluctance motor drives is proposed in this paper. The advantages and disadvantages of this topology vis-a-vis the conventional 3 phase H-bridge converter, are highlighted from the points of view of economy in switches, volt ampere rating, associated controller cost, and packaging. Design considerations for the PMBDC motor are derived for use with the proposed converter topology. The operational and design characteristics of this converter driven PMBDC drive are derived for four quadrant performance. Guidelines for the design of the proposed performance. Guidelines for the design of the proposed topology are derived and presented in the paper. Experimental results from a laboratory prototype are presented to validate the feasibility of the proposed PMBDC drive system.

Krishnan, R.; Lee, S. [Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (United States)

1995-12-31T23:59:59.000Z

384

Solid-state NMR studies for DC 745: April--May 2000  

SciTech Connect (OSTI)

Powles et al. reported in 1961 that pdydimethyl siloxane melts exhibit a transverse decay of nuclear spin magnetization (T{sub 2}) that is nonexponential. This observation was interpreted in terms of the proton NMR signal from the melt having characteristics of a broad line. Since then, similar findings were obtained for other polymer melts too. Accordingly to Powles et al. this peculiar proton line shape was the result of an intramolecular direct dipole-dipole interaction between a pair of protons. They also suggested that this dipolar interaction was weak because the dipolar interaction was motionally averaged since the orientation-dependent local dipolar field is modulated by molecular dynamics. In sum, the consequences and the origins of nuclear spin correlations in viscous polymer melts were recognized almost 4 decades ago. In the 1970s, Cohen-Addad suggested that these weak proton dipolar interactions could be used to characterize polymer melts and networks. In this work, we have used some of these ideas to probe the effects of thermal treatments on the proton spin-spin relaxation times for DC745.

Stephens, T.; Labouriau, A.

2000-12-01T23:59:59.000Z

385

Influence of the transverse dimension on the structure and properties of dc glow discharges  

SciTech Connect (OSTI)

Two-dimensional (2D) simulations of a dc glow discharge with a cold cathode in argon have been performed for various radii of the discharge tube. It is shown that the loss of the charged particles to the walls can significantly affect plasma parameters as well as properties of the cathode sheath. The longitude dimensions of the negative glow and Faraday dark space depend on the transverse loss of the charge particles and are not consistently predicted with a 1D model. The common assumption that the cathode sheath can be analyzed independently of the plasma also may not be valid. The transverse inhomogeneity of the plasma leads to a change in the current density distribution over the cathode surface. The thickness of the cathode sheath can vary with radial distance from the discharge axis, even for the case of negligible radial loss of the charge particles. The 2D model results provide an analysis of the conditions of applicability of the 1D model.

Bogdanov, E. A. [St. Petersburg State University, St. Petersburg 198904 (Russian Federation); Adams, S. F. [Air Force Research Laboratory, Wright-Patterson AFB, Ohio 45433 (United States); Demidov, V. I. [Department of Physics, West Virginia University, Morgantown, West Virginia 26506 (United States); Kudryavtsev, A. A. [Department of Optics, St. Petersburg State University, St. Petersburg 198904 (Russian Federation); Williamson, J. M. [UES, Inc., 4401 Dayton-Xenia Rd., Beavercreek, Ohio 45432 (United States)

2010-10-15T23:59:59.000Z

386

HF treatment effect for carbon deposition on silicon (111) by DC sputtering technique  

SciTech Connect (OSTI)

Surface modifications of Si (111) substrate by HF solution for thin film carbon deposition have been systematically studied. Thin film carbon on Si (111) has been deposited using DC Unbalanced Magnetron Sputtering with carbon pellet doped by 5% Fe as the target. EDAX characterization confirmed that the carbon fraction on Si substrate much higher by dipping a clean Si substrate by HF solution before sputtering process in comparison with carbon fraction on Si substrate just after conventional RCA. Moreover, SEM and AFM images show the uniform thin film carbon on Si with HF treatment, in contrast to the Si without HF solution treatment. These experimental results suggest that HF treatment of Si surface provide Si-H bonds on top Si surface that useful to enhance the carbon deposition during sputtering process. Furthermore, we investigate the thermal stability of thin film carbon on Si by thermal annealing process up to 900 °C. Atomic arrangements during annealing process were characterized by Raman spectroscopy. Raman spectra indicate that thin film carbon on Si is remaining unchanged until 600 °C and carbon atoms start to diffuse toward Si substrate after annealing at 900 °C.

Aji, A. S., E-mail: aji.ravazes70@gmail.com; Darma, Y., E-mail: aji.ravazes70@gmail.com [Quantum Semiconductor and Devices Lab., Physics of Material Electronics Research Division, Department of Physics, Institut Teknologi Bandung (Indonesia)

2014-03-24T23:59:59.000Z

387

Computer model of the MFTF-B neutral beam Accel dc power supply  

SciTech Connect (OSTI)

Using the SCEPTRE circuit modeling code, a computer model was developed for the MFTF Neutral Beam Power Supply System (NBPSS) Accel dc Power Supply (ADCPS). The ADCPS provides 90 kV, 88 A, to the Accel Modulator. Because of the complex behavior of the power supply, use of the computer model is necessary to adequately understand the power supply's behavior over a wide range of load conditions and faults. The model developed includes all the circuit components and parameters, and some of the stray values. The model has been well validated for transients with times on the order of milliseconds, and with one exception, for steady-state operation. When using a circuit modeling code for a system with a wide range of time constants, it can become impossible to obtain good solutions for all time ranges at once. The present model concentrates on the millisecond-range transients because the compensating capacitor bank tends to isolate the power supply from the load for faster transients. Attempts to include stray circuit elements with time constants in the microsecond and shorter range have had little success because of huge increases in computing time that result. The model has been successfully extended to include the accel modulator.

Wilson, J.H.

1983-11-30T23:59:59.000Z

388

Improving the dynamic performance of a complex AC/DC system by HVDC control modifications  

SciTech Connect (OSTI)

The power system of Hydro-Quebec has a peak load of approximately 27 GW. The great distance between the production sites and the load centers introduces stability limitations, which is the reason why the Quebec grid cannot be economically synchronized (through ac transmission with limited capacity) with the U.S. northeastern network. Power exports are therefore dependent on the use of HVDC links of which Hydro-Quebec now possesses five, for a capacity of over 2600 MW. Such a capacity will again soon increase. At the moment, the Chateauguay scheme has the largest HVDC capacity. It transfers 1000 MW by means of two Back-to-Back converter blocks. Various automatic control systems are installed on the Chateauguay scheme owing to the fact that a single circuit of a 765 kV ac line transmits the output of both the HVDC converter stations as well as the output from Beauharnois hydro generating station. Such controls have performed satisfactorily since 1984. However, a remarkable improvement of the overall ac/dc system dynamic performance can be gained by making certain modifications in some of these HVDC system controls. This paper presents the salient features of such control modifications, currently under consideration, using the results of an investigation by digital and analogue simulations that demonstrate the achieved improvements.

Hammad, A.E. (ABB Power Systems, Baden (CH)); Gagnon, J. (Hydro Quebec, Montreal (CA)); McCallum, D. (IREQ, Montreal (CA))

1990-10-01T23:59:59.000Z

389

Characterization of the CEBAF 100 kV DC GaAs Photoelectron Gun Vacuum System  

SciTech Connect (OSTI)

A vacuum system with pressure in the low ultra-high vacuum (UHV) range is essential for long photocathode lifetimes in DC high voltage GaAs photoguns. A discrepancy between predicted and measured base pressure in the CEBAF photoguns motivated this study of outgassing rates of three 304 stainless steel chambers with different pretreatments and pump speed measurements of non-evaporable getter (NEG) pumps. Outgassing rates were measured using two independent techniques. Lower outgassing rates were achieved by electropolishing and vacuum firing the chamber. The second part of the paper describes NEG pump speed measurements as a function of pressure through the lower part of the UHV range. Measured NEG pump speed is high at pressures above 5×10^?11 Torr, but may decrease at lower pressures depending on the interpretation of the data. The final section investigates the pump speed of a locally produced NEG coating applied to the vacuum chamber walls. These studies represent the first detailed vacuum measurements of CEBAF photogun vacuum chambers.

M.L. Stutzman; P. Adderley; J. Brittian; J. Clark; J. Grames; J. Hansknecht; G.R. Myneni; M. Poelker

2007-05-01T23:59:59.000Z

390

Design of a high power density, permanent magnet, axial gap dc motor  

SciTech Connect (OSTI)

In the design of drive motors for undersea vehicles, the premium placed on noise suppression suggests the use of a brush-commutated dc motor. The additional constraints of weight and volume, as well as unusual configuration, presents the axial air-gap configuration, with a permanent magnet field, as a viable candidate. In such a configuration the design of the brushes and commutator and the resulting structure becomes critical. The report describes a novel solution to this problem. The basic motor consists of two discs containing permanent magnets on either side of a magnetic structure containing the copper windings. An advantage of this motor concept is that copper cooling may easily be accomplished through the use of liquid circulating through the stator windings. The role of field and armature in a conventional disc motor configuration are reversed. The two discs containing the permanent magnets are rotating. The brushes are on the discs. The magnetic structure with the coils is stationary. The commutator bars are imbedded in the stationary member. Input power is supplied to the brushes through a brush-and-slip ring assembly. An electromagnetic design analysis for a 92 ft-lb, 700 rpm motor was performed. A finite element analysis has been conducted and the results show that magnetic saturation is not a limiting factor in this design. The motor torque is achievable within weight and volume constraints. 9 figs., 1 tab.

Hawsey, R.A.; Daniel, D.S.; Thomas, R.J. (Oak Ridge National Lab., TN (USA)); Bailey, J.M. (Tennessee Univ., Knoxville, TN (USA))

1990-01-01T23:59:59.000Z

391

Low noise charge sensitive preamplifier DC stabilized without a physical resistor  

DOE Patents [OSTI]

The invention is a novel charge sensitive preamplifier (CSP) which has no resistor in parallel with the feedback capacitor. No resetting circuit is required to discharge the feedback capacitor. The DC stabilization of the preamplifier is obtained by means of a second feedback loop between the preamplifier output and the common base transistor of the input cascode. The input transistor of the preamplifier is a Junction Field Transistor (JFET) with the gate-source junction forward biased. The detector leakage current flows into this junction. This invention is concerned with a new circuit configuration for a charge sensitive preamplifier and a novel use of the input Field Effect Transistor of the CSP itself. In particular this invention, in addition to eliminating the feedback resistor, eliminates the need for external devices between the detector and the preamplifier, and it eliminates the need for external circuitry to sense the output voltage and reset the CSP. Furthermore, the noise level of the novel CSP is very low, comparable with the performance achieved with other solutions. Experimental tests prove that this configuration for the charge sensitive preamplifier permits an excellent noise performance at temperatures including room temperature. An equivalent noise charge of less than 20 electrons r.m.s. has been measured at room temperature by using a commercial JFET as input device of the preamplifier.

Bertuccio, Giuseppe (Brianza, IT); Rehak, Pavel (Patchogue, NY); Xi, Deming (Beijing, CN)

1994-09-13T23:59:59.000Z

392

Low noise charge sensitive preamplifier DC stabilized without a physical resistor  

DOE Patents [OSTI]

The invention is a novel charge sensitive preamplifier (CSP) which has no resistor in parallel with the feedback capacitor. No resetting circuit is required to discharge the feedback capacitor. The DC stabilization of the preamplifier is obtained by means of a second feedback loop between the preamplifier output and the common base transistor of the input cascode. The input transistor of the preamplifier is a Junction Field Transistor (JFET) with the gate-source junction forward biased. The detector leakage current flows into this junction. This invention is concerned with a new circuit configuration for a charge sensitive preamplifier and a novel use of the input Field Effect Transistor of the CSP itself. In particular this invention, in addition to eliminating the feedback resistor, eliminates the need for external devices between the detector and the preamplifier, and it eliminates the need for external circuitry to sense the output voltage and reset the CSP. Furthermore, the noise level of the novel CSP is very low, comparable with the performance achieved with other solutions. Experimental tests prove that this configuration for the charge sensitive preamplifier permits an excellent noise performance at temperatures including room temperature. An equivalent noise charge of less than 20 electrons r.m.s. has been measured at room temperature by using a commercial JFET as input device of the preamplifier. 6 figs.

Bertuccio, G.; Rehak, P.; Xi, D.

1994-09-13T23:59:59.000Z

393

Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C., Area  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish policies and procedures for management of DOE, including NNSA, Management and Operating (M&O) and other facility management contractor employees assigned to the Washington, D.C., area. Cancels DOE O 350.2.

2003-10-29T23:59:59.000Z

394

Previously, DC Magnets located at Neutron-Scattering Beamlines were commercially-manufactured superconducting magnets and limited to 17 T. A  

E-Print Network [OSTI]

Previously, DC Magnets located at Neutron-Scattering Beamlines were commercially, this was the first designed specifically for neutron scattering and the first to include resistive suitable for neutron scattering, diffraction and spectroscopy experiments with the neutron beam passing

Weston, Ken

395

Presented at ACADIA 2000 Conference, Washington, D.C., October 2000 and published in the Proceedings of the ACADIA 2000 Conference.  

E-Print Network [OSTI]

in the Proceedings of the ACADIA 2000 Conference. This work was supported by the Assistant Secretary for EnergyLBNL-45548 DR-437 Presented at ACADIA 2000 Conference, Washington, D.C., October 2000 and published

396

Analysis of system wide distortion in an integrated power system utilizing a high voltage DC bus and silicon carbide power devices  

E-Print Network [OSTI]

This research investigates the distortion on the electrical distribution system for a high voltage DC Integrated Power System (IPS). The analysis was concentrated on the power supplied to a propulsion motor driven by an ...

Fallier, William F. (William Frederick)

2007-01-01T23:59:59.000Z

397

Extended Constant Power Speed Range of the Brushless DC Motor Through Dual Mode Inverter Control  

SciTech Connect (OSTI)

The trapezoidal back electromotive force (emf) brushless direct current (dc) motor (BDCM) with surface-mounted magnets has high-power density and efficiency especially when rare-earth magnet materials are used. Traction applications, such as electric vehicles, could benefit significantly from the use of such motors. Unfortunately, a practical means for driving the motor over a constant power speed ratio (CPSR) of 5:1 or more has not yet been developed. A key feature of these motors is that they have low internal inductance. The phase advance method is effective in controlling the motor power over such a speed range, but the current at high speed may be several times greater than that required at the base speed. The increase in current during high-speed operation is due to the low motor inductance and the action of the bypass diodes of the inverter. The use of such a control would require increased current rating of the inverter semiconductors and additional cooling for the inverter, where the conduction losses increase proportionally with current, and especially for the motor, where the losses increase with the square of the current. The high current problems of phase advance can be mitigated by adding series inductance; however, this reduces power density, requires significant increase in supply voltage, and leaves the CPSR performance of the system highly sensitive to variations in the available voltage. A new inverter topology and control scheme has been developed that can drive low-inductance BDCMs over the CPSR that would be required in electric vehicle applications. This new controller is called the dual-mode inverter control (DMIC). It is shown that the BDCM has an infinite CPSR when it is driven by the DMIC.

Lawler, J.S.

2000-06-23T23:59:59.000Z

398

Instability of pre-existing resonances in the DC Stark effect vs. stability in the AC Stark effect  

E-Print Network [OSTI]

For atoms described by a 1-dimensional Friedrichs model we present the following result: pre-existing resonances, when subjected to a small constant electric field (DC Stark effect), are unstable in the weak field limit. In contrast, pre-existing resonances under the influence of a small time-periodic electric field (AC Stark effect) are stable in this limit. This article is a review of our results in "Instability of pre-existing resonances under a small constant electric field", arXiv:1310.4745.

I. Herbst; J. Rama

2014-03-29T23:59:59.000Z

399

Report on the technical workshop on WTI incinerator risk issues. Held in Washington, DC on December 8-9, 1993  

SciTech Connect (OSTI)

The report includes information and materials from a peer review workshop organized by EPA's Risk Assessment Forum (RAF) for the Office of Solid Waste and Emergency Response and Region 5. The meeting was held in Washington, DC, at the Holiday Inn Capitol on December 8-9, 1993. The subject of the peer review was a draft project plan prepared by EPA Region 5 for assessing risk at an incinerator operated by Waste Technologies Industries (WTI) in East Liverpool, Ohio. The peer review panel was convened to evaluate the project plan as the scientific foundation for a risk assessment, which will be used in setting final permit conditions for the WTI facility.

Not Available

1993-12-01T23:59:59.000Z

400

Influence of the airflow speed along transmission lines on the DC corona discharge loss, using finite element approach  

SciTech Connect (OSTI)

Corona discharge is of great interest from the physical point of view and due to its numerous practical applications in industry and especially one of the most important sources of loss in the high voltage transmission lines. This paper provides guidelines for the amount of electric loss caused by corona phenomenon occurred around a DC high voltage wire placed between two flat plates and influence of wind speed rate on the amount of corona loss using COMSOL Multiphysics. So electric potential distribution patterns and charge density diffusion around the wire are studied in this article.

Shemshadi, A.; Akbari, A. [Electric Department, K. N. Toosi University of Technology, Tehran (Iran, Islamic Republic of); Niayesh, K. [Electric Engineering Department, Tehran University, Tehran (Iran, Islamic Republic of)

2012-07-15T23:59:59.000Z

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

A Five-Level Cascade Multilevel Inverter Three-Phase Motor Drive Using a Single DC Source  

SciTech Connect (OSTI)

A method is presented showing that a 5-level cascade multilevel inverter for a three-phase permanent magnet sychronous motor drive can be implemented using only a single DC link to supply a standard 3-leg inverter along with three full H-bridges supplied by capacitors. It is shown that the capacitor voltages can be regulated while achieving an output voltage waveform that is 20% greater than that obained using the standard 3-leg inverter alone. Finally conditions are given in terms of the power factor and modulation index that determine when the capacitor voltage can regulated.

Chiasson, J. N. [University of Tennessee, Knoxville (UTK)

2006-10-01T23:59:59.000Z

402

A Five-Level Cascade Multilever Invertor Three-Phase Motor Drive Using a Single DC Source  

SciTech Connect (OSTI)

A method is presented showing that a 5-level cascade multilevel inverter for a three-phase permanent magnet synchronous motor drive can be implemented using only a single DC link to supply a standard 3-leg inverter along with three full H-bridges supplied by capacitors. It is shown that the capacitor voltages can be regulated while achieving an output voltage waveform that is 20% greater than that obtained using the standard 3-leg inverter alone. Finally conditions are given in terms of the power factor and modulation index that determine when the capacitor voltage can regulated.

Chiasson, J.N. (Univ. Tennessee-Knoxville)

2006-09-15T23:59:59.000Z

403

Data:E9050eac-9991-450b-83df-847791b2c3dc | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Pagec-01b596aa1744b55997c1cc No revision has beenace4-3e58210a501f Noc9-64f337dd0502055ddf45fb-29e8831632bd No91b2c3dc No

404

Data:5fbc2839-003b-46bf-980d-150565dc25f8 | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office695810186 No revision has been approved for this page.f9b87a5 No9c38a3bad1d40565dc25f8 No revision has been

405

Data:6491176f-b6ca-4556-9866-f6392e04dc44 | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office695810186 No revision has been approved fore6e8eee44 Nobfa2-747e1ee9f93d Nob5-17048b94d11192e04dc44 No revision

406

Data:4770a302-d3d1-4378-9445-ac80dc81aa30 | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of48d9ff47edf3a87dcc95b No revisione66e17fc7f7 No revisione18fe97cb-14d199c51f2d Nofb3640 No0dc81aa30 No

407

Data:9405338d-76b8-43d5-a99f-6386dc173069 | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office695810186 No revisione0a2d50bdf35248292f1 No revisionedead8-4241-4b53-933a-90a289b19506 Nob873bfc67dba386dc173069

408

Data:Dbdad3b1-04dc-40cd-843e-921faaade910 | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Pagec-01b596aa1744 No revisionDbdad3b1-04dc-40cd-843e-921faaade910 No revision has been approved for this page. It is currently

409

Data:Dc00b1cc-729b-4810-b51a-0ebc30399936 | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Pagec-01b596aa1744 No revisionDbdad3b1-04dc-40cd-843e-921faaade910 No revision has been approved for1a-0ebc30399936 No revision

410

Data:8772df9b-032c-41bd-98da-19dd3cb485dc | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office695810186 No revisione0a2d50bdf No revisionb27d098e Nod173ef850e7b37914bbdf Noc-54044054ab55 No19dd3cb485dc No

411

Stressing of turbine-generator-exciter shafts by variable-frequency currents superimposed on DC currents in asynchronous HVDC links and following disturbances at converter stations  

SciTech Connect (OSTI)

Ripple currents on the DC side of both HVDC synchronous and asynchronous. Links together with cleared HVDC and AC system disturbances can excite in some circumstances onerous torsional vibrations in large steam generator shafts. The problem has assumed importance in recent months on account of the HVDC Link between Scotland and Northern Ireland going ahead, on account of the proposed Eire/Wales Link, and because AC/DC/AC couplers are to be installed extensively to interconnect the East and West European Grid Systems. This paper discusses and analyses excitation of shaft torsional vibrations in steam turbine-generator-exciter shafts in close proximity to HVDC converter stations by (1) variable-frequency ripple currents superimposed on the DC currents in asynchronous Links, and (2) disturbances at bi-polar converter stations. The time response and tables show that for the systems studied variable-frequency ripple currents superimposed on the DC current in asynchronous Links can excite shaft torsional vibrations, the very small noncharacteristic currents could result in onerous shaft torques which might damage the machine, and that DC line faults at converter stations in close proximity of steam turbine-generator units can excite onerous turbine-generator shaft torsional response. Detailed simulation of the HVDC converter and generator is necessary for precise assessments of shaft torsional response following HVDC converter station faults. 500MW, 660MW, 1000MW and 1300MW machines are considered in the analyses that are made.

Hammons, T.J.; Bremner, J.J. (Univ. of Glasgow (United Kingdom))

1994-09-01T23:59:59.000Z

412

A Novel Inductor-less DC-AC Cascaded H-bridge Multilevel Boost Inverter for Electric/Hybrid Electric Vehicle Applications  

SciTech Connect (OSTI)

This paper presents an inductorless cascaded H- bridge multilevel boost inverter for EV and HEV applications. Currently available power inverter systems for HEVs use a DC- DC boost converter to boost the battery voltage for a traditional 3-phase inverter. The present HEV traction drive inverters have low power density, are expensive, and have low efficiency because they need a bulky inductor. An inductorless cascaded H-bridge multilevel boost inverter for EV and HEV applications is proposed in this paper. Traditionally, each H-bridge needs a DC power supply. The proposed inductorless cascaded H-bridge multilevel boost inverter uses a standard 3-leg inverter (one leg for each phase) and an H-bridge in series with each inverter leg which uses a capacitor as the DC power source. Fundamental switching scheme is used to do modulation control and to produce a 5-level phase voltage. Experiments show that the proposed inductorless DC-AC cascaded H-bridge multilevel boost inverter can output a boosted AC voltage.

Du, Zhong [ORNL; Ozpineci, Burak [ORNL; Tolbert, Leon M [ORNL; Chiasson, John N [ORNL

2007-01-01T23:59:59.000Z

413

SUNDAY -1PM -7PM ASBURY PARK, NJ01  

E-Print Network [OSTI]

by the Graduate School. THURSDAY - 6PM - 7:30PM CLEVELAND TOWER AT OLD GC05 SAND VOLLEYBALL AND COOL SUMMER TREATS participant, but only while supplies last--first-come, first-served. We'll gather on the Palmer Square Green

414

HANWEI ZHANG 19 Riley Ct. Skillman, NJ 08558  

E-Print Network [OSTI]

3, Pages 277-298 [6]. Klein, A., Zhang, H. & Themelis, N. J. (2003). A Waste-To-Energy Power Plant.zhang@gmail.com Research Interests Thermal conversion of municipal solid waste to energy; Numerical Analysis of High (2007). Process Simulation of a large Mass Burn Waste-To-Energy boiler by the combination of CFD

415

NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastruct...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

1 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation arravt051tifeinberg2011...

416

Role in Climate A Robock, Rutgers University,, New Brunswick, NJ  

E-Print Network [OSTI]

and cooling the surface. These clouds also absorb both solar (near infrared) and terrestrial radiation, heating the lower stratosphere. Volcanic aerosols also serve as surfaces for hetero- geneous chemical heating in the lower stratosphere, but the net effect is still heating. As this chemical effect depends

Robock, Alan

417

To cities, with nothing : prisoner resettlement in Newark, NJ  

E-Print Network [OSTI]

This thesis considers how cities can improve employment outcomes of recently released, formerly incarcerated people. The Newark Prisoner Reentry Initiative (NPRI) is a unique case where the city directly managed six ...

Feeney, Kevin Joseph

2011-01-01T23:59:59.000Z

418

RECIPIENT:Princeton Power Systems STATE: NJ PROJECT Marine High...  

Broader source: Energy.gov (indexed) [DOE]

A9 Information gathering (including, but not limited to, terature surveys, inventories, audits), data analysis (including computer modeling), document preparation (such...

419

Northeast - NY NJ CT PA Area | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoading map...(Utility Company)References ↑ US Census BureauNorthbrook, Ohio: EnergyJump to:

420

NJ Regional Middle School Science Bowl | Princeton Plasma Physics Lab  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challengeMultiscaleLogos NERSCJeffreyKey ActionsThe NextAwards » 2012

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

QER Public Meeting in Newark, NJ: Electricity Transmission and Distribution  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015 | DepartmentLoans | Department of- East | Department of

422

NJ OFFICE OF THE STATE Stephen M. Eells  

E-Print Network [OSTI]

of data. Data Privacy ­ Personal and confidential information must be protected. Federal regulations (IE Challenges as we Move Forward Electronic Evidence vs hard copy Access to data vs privacy protection Your accuracy. #12;Data Access Data Protection ­ limiting access so as to protect the integrity and accuracy

Lin, Xiaodong

423

DOE's NJ HIGH SCHOOL SCIENCE BOWL® | Princeton Plasma Physics Lab  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOffice of ScientificSolar Residence by e2DOE5, 2012

424

Category:Atlantic City, NJ | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectricEnergyCTBarreis aCallahanWind Farm Jump to:CaseInternational

425

Northeast - NY NJ CT PA Area | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's HeatMexico:Community NominationsCarolina‎ |NAE/Enel NorthMiddleNortheast

426

DOE - Office of Legacy Management -- Bakelite Corp - NJ 35  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are here Home » SitesNJFertilizer Works -Bakelite

427

DOE - Office of Legacy Management -- Bloomfield Tool Co - NJ 21  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are here Home »Hill - NJFacility -Bloomfield Tool

428

DOE - Office of Legacy Management -- Bowen Lab - NJ 33  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are here Home »Hill - NJFacilityBodo Canyon Cell

429

DOE - Office of Legacy Management -- Callite Tungsten Co - NJ 36  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are here Home »Hill -Elmore - OHCallite Tungsten Co

430

DOE - Office of Legacy Management -- Fairmont Chemical Co - NJ 25  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are here Home »HillNYEra Tool andFairmont Chemical

431

DOE - Office of Legacy Management -- Heyden Chemical Corp - NJ 19  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are here HomeGunnison Mill Site -HealdHeyden

432

DOE - Office of Legacy Management -- Navy Ammunition Depot - NJ 15  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are herePA 3003A AECMexico -36

433

DOE - Office of Legacy Management -- Picatinny Arsenal - NJ 31  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are herePAOsborne Co - OHPhiladelphia Navy Yard -

434

DOE - Office of Legacy Management -- Princeton University - NJ 08  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are herePAOsborne Co -0-19 Polytechnic-Princeton

435

DOE - Office of Legacy Management -- Raritan Arsenal - NJ 32  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou are herePAOsborne Co -0-19GasK LeRaritan Arsenal

436

DOE - Office of Legacy Management -- Tube Reducing Co - NJ 11  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou areDowntown Site - MOTracerlab Inc - MA0-02ATube

437

DOE - Office of Legacy Management -- United Lead Co - NJ 29  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou areDowntown Site - MOTracerlab IncMines

438

DOE - Office of Legacy Management -- Westinghouse Electric Corp - NJ 03  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou areDowntown Site -Miami -NewPlant - PA

439

DOE - Office of Legacy Management -- Wayne Site - NJ 16  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou areDowntownRocky FlatsOhio > Fernald >Wayne

440

NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastructure |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F S i DOEToward aInnovation |NEXT STEPS The nextEnergy

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastructure |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F S i DOEToward aInnovation |NEXT STEPS The nextEnergyDepartment

442

NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastructure |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d F S i DOEToward aInnovation |NEXT STEPS The

443

Sandia National Laboratories: NJ Transit FutureGrid  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -theErik Spoerke SSLSMolten-Salt Storage System Areva SolarNASA NASANEDNESLNISACNJ

444

Data:C6df41ea-67e6-408a-945c-77b3dc08ea7d | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onb5-dcc1fcffd1f2bb71-d4159a938742 No revision has4dc5b1450aa31602c36f No revisionaff-db384d0a0dad No revision7b3dc08ea7d

445

U.S. Energy Information Administration | Annual Energy Outlook...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Supply Model Regions Atlantic WA MT WY ID NV UT CO AZ NM TX OK IA KS MO IL IN KY TN MS AL FL GA SC NC WV PA NJ MD DE NY CT ME RI MA NH VA WI MI OH NE SD MN ND AR LA OR CA VT...

446

U.S. Energy Information Administration | Annual Energy Outlook...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

East North Central Mountain AK WA MT WY ID NV UT CO AZ NM TX OK IA KS MO IL IN KY TN MS AL FL GA SC NC WV PA NJ MD DE NY CT VT ME RI MA NH VA WI MI OH NE SD MN ND AR LA OR CA HI...

447

Annual Energy Outlook 2012  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Supply Model Regions Atlantic WA MT WY ID NV UT CO AZ NM TX OK IA KS MO IL IN KY TN MS AL FL GA SC NC WV PA NJ MD DE NY CT ME RI MA NH VA WI MI OH NE SD MN ND AR LA OR CA VT...

448

U.S. Energy Information Administration | Annual Energy Outlook...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

2013 Regional maps Figure F6. Coal supply regions WA ID OR CA NV UT TX OK AR MO LA MS AL GA FL TN SC NC KY VA WV WY CO SD ND MI MN WI IL IN OH MD PA NJ DE CT MA NH VT NY ME RI...

449

U.S. Energy Information Administration | Annual Energy Outlook...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Coal supply regions Figure F6. Coal Supply Regions WA ID OR CA NV UT TX OK AR MO LA MS AL GA FL TN SC NC KY VA WV WY CO SD ND MI MN WI IL IN OH MD PA NJ DE CT MA NH VT NY ME RI...

450

U.S. Energy Information Administration | Annual Energy Outlook...  

Gasoline and Diesel Fuel Update (EIA)

2012 Regional maps Figure F6. Coal supply regions WA ID OR CA NV UT TX OK AR MO LA MS AL GA FL TN SC NC KY VA WV WY CO SD ND MI MN WI IL IN OH MD PA NJ DE CT MA NH VT NY ME RI...

451

Annual Energy Outlook 2012  

Gasoline and Diesel Fuel Update (EIA)

AZ OR CA HI V MT WY ID UT CO IV OK IA KS MO IL IN KY TN WI MI OH NE SD MN ND II NM TX MS AL AR LA III NJ CT VT ME RI MA NH FL GA SC NC WV MD DE VA NY PA I PAD District I - East...

452

U.S. Energy Information Administration | Annual Energy Outlook...  

Gasoline and Diesel Fuel Update (EIA)

AZ OR CA HI V MT WY ID UT CO IV OK IA KS MO IL IN KY TN WI MI OH NE SD MN ND II NM TX MS AL AR LA III NJ CT VT ME RI MA NH FL GA SC NC WV MD DE VA NY PA I PAD District I - East...

453

Damping of a parallel ac-dc power system using PID power system stabilizers and rectifier current regulators  

SciTech Connect (OSTI)

A novel approach is presented to improve the dynamic stability of a parallel AC-DC power system. The developed scheme employs a proportional-integral-derivative (PID) power system stabilizer (PSS) and a PID rectifier current regulator (RCR) to enhance the damping for the electromagnetical mode of the system. The parameters of the proposed PID controllers are determined using a unified approach based on modal control theory. Eigenvalue analyses are performed for the system under various operating conditions in order to compare the damping effects provided by the two different control schemes. To demonstrate the effectiveness of the proposed damping schemes under disturbance conditions simulated dynamic response tests based on a nonlinear system model are also performed.

Hsu, Y.Y.; Wang, L. (Dept. of Electrical Engineering, National Taiwan Univ., Taipei (TW))

1988-09-01T23:59:59.000Z

454

Reducing Our Carbon Footprint: A Low-Energy House in Berkeley, Kabul, and Washington DC (LBNL Science at the Theater)  

ScienceCinema (OSTI)

How well can we assess and improve building energy performance in California homes? How much energy-and carbon-do homes use in other parts of the world? Rick Diamond, deputy group leader of the Berkeley Lab Energy Performance of Buildings Group, discusses change, global solutions, and the stories of three houses in Berkeley, Kabul (Afghanistan), and Washington, D.C. Diamond, who is also a senior advisor at the California Institute for Energy and Environment, investigates user interactions with the built environment for improved building energy performance. The group has studied a wide range of issues related to energy use in housing, including duct system efficiency, user behavior, and infiltration and ventilation measurements.

Diamond, Rick

2011-04-28T23:59:59.000Z

455

Rotor reference frame models of a multiloop 2-phase motor drive in brushless DC and microstepping modes  

SciTech Connect (OSTI)

This paper describes non-linear models of a 2-phase permanent magnet synchronous motor drive in brushless DC and microstepping modes. The models account for everything from the main power bus up to and including the mechanical load and velocity feedback loop. In particular, the models include the power electronics for each phase complete with their internal feedback loops. Classical state space averaged power electronics models are transformed to the rotor reference frame along with the usual electromechanical variables. Since SPICE linearizes the rotor reference frame model about shaft velocity, instead of shaft angle, frequency domain methods apply. The frequency domain analysis detects unstable interactions between torque angle and deliberate feedback within the drives. Time domain simulations using stator reference frame models confirm the results. All models are SPICE-compatible but were developed on Cadence`s Analog Workbench.

Chen, J.E. [Lockheed Missiles and Space Co. Inc., Sunnyvale, CA (United States)

1995-12-31T23:59:59.000Z

456

Simulation of BPM and DC-monitor assembly for the NESTOR storage ring by CST Studio Suite  

E-Print Network [OSTI]

The piece of NESTOR vacuum chamber with the ceramic insertion for DC-monitor and RF-shields was simulated by using both transient and wake field solvers of CST Studio Suite. For a 6 mm gap between two RF-shields the contributions of the assembly considered to the longitudinal broadband (BB) impedance Z/n and the loss factor kloss are 0.71 Ohm and 0.21 V/pC, correspondingly. These estimates are the second largest after those of the RF-cavity that were obtained till now for the NESTOR ring components. Contributions from a beam position monitor (BPM) are also obtained by simulation and compared with analytical estimates obtained earlier. We also present in the paper the frequency content of longitudinal impedance in the frequency range from 0 to 16 GHz for all ring components considered.

Androsov, V P; Telegin, Yu N

2012-01-01T23:59:59.000Z

457

Energy Conversion in Lifting Mass Vertically using a DC Electric Motor by Observing Required Time to Lift Object for a Certain Height  

E-Print Network [OSTI]

In lifting mass vertically using a DC electric motor energy conversion from electric energy, through intermediate kinetic energy, to gravitation potential energy shows that time required {\\Delta}t to lift load mass m for height h is dependent quadratically to m. Several approaches to explain the experiment observation are discussed in this work, from ideal energy conversion to numerical solution from differential equation.

Viridi, Sparisoma; Permana, Sidik; Srigutomo, Wahyu; Susilawati, Anggie; Nuryadin, Bebeh Wahid; Nurhasan,

2014-01-01T23:59:59.000Z

458

You can customize the XL-DC, Mark V, and GPS-705 products by selecting option cards that suit your specific application  

E-Print Network [OSTI]

(SNMP): SNMP provides the network administrator with the NTP Time Server Protocol, network status that are avail- able for each of these products. XL-DC Mark V GPS-705 Network Time Server s s Telecommunications s s Multicode Output s s s 1, 5, 10 MHz/MPPS s s s PTTI Interface s s s Low Phase Noise Output s s Network

Berns, Hans-Gerd

459

Proceedings of the International Conference on Software Maintenance, Washington, D.C., November, 1998 An Empirical Study of the Effects of Minimization on the Fault Detection  

E-Print Network [OSTI]

Proceedings of the International Conference on Software Maintenance, Washington, D.C., November Columbus, OH hongc@cis.ohio-state.edu Abstract Test suite minimization techniques attempt to reduce reduce the ability of that test suite to reveal faults in the software. A recent study showed

Rothermel, Gregg

460

Proceedings of the International Conference on Software Maintenance, Washington, D.C., November, 1998 An Empirical Study of the Effects of Minimization on the Fault Detection  

E-Print Network [OSTI]

Proceedings of the International Conference on Software Maintenance, Washington, D.C., November Columbus, OH hongc@cis.ohio­state.edu Abstract Test suite minimization techniques attempt to reduce reduce the ability of that test suite to reveal faults in the software. A recent study showed

Rothermel, Gregg

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Supplemental Requirements for the Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C., Area  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Notice supplements review and approval requirements of DOE O 350.2A, Use of Management and Operating (M&O) or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C., Area, dated 10-29-03.

2005-10-19T23:59:59.000Z

462

Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C. Area  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish policies and procedures for management of Department of Energy (DOE), including National Nuclear Security Administration (NNSA), management and operating (M&O) and other facility management contractor employees assigned to the Washington, D.C. area. Cancels DOE O 350.2A

2011-05-31T23:59:59.000Z

463

Agee, J. K. (1993). Fire Ecology of Pacific Northwest Forests. Washington, DC: Island Aldrich, J. W. 1963. Geographic orientation of North American Tetraonidae. J. Wildl.  

E-Print Network [OSTI]

References A Agee, J. K. (1993). Fire Ecology of Pacific Northwest Forests. Washington, DC: Island in beaver. J. Mammal. 49(4):759-762. Aleksiuk, M. 1970. The seasonal food regime of arctic beavers. Ecology classification of ecological communities: terrestrial vegetation of the United States. Volume II. The National

464

Keystone XL I DRIVE A HYBRID CAR AND SET MY THERMOSTAT AT 80F IN THE WASHINGTON, DC, SUMMER. I USE  

E-Print Network [OSTI]

on the Keystone XL pipeline to transport crude oil from the tar sands deposits of Alberta, Canada, and from energy future. Opponents of Keystone XL have been right to contest construction of the pipeline with- outKeystone XL I DRIVE A HYBRID CAR AND SET MY THERMOSTAT AT 80°F IN THE WASHINGTON, DC, SUMMER. I USE

Wilson, Mark A.

465

Workshop on Satellites for Solar Energy Resource Information -Washington, DC, April 10-11, 1996 POTENTIALS OF IMAGES FROM GEOSTATIONARY SATELLITE DATA FOR THE  

E-Print Network [OSTI]

Workshop on Satellites for Solar Energy Resource Information - Washington, DC, April 10-11, 1996 POTENTIALS OF IMAGES FROM GEOSTATIONARY SATELLITE DATA FOR THE ASSESSMENT OF SOLAR ENERGY PARAMETERS Lucien Author manuscript, published in "Workshop `satellites for solar energy resource information', Washington

Paris-Sud XI, Université de

466

Evaluation of a Current Source Active Power Filter to Reduce the DC Bus Capacitor in a Hybrid Electric Vehicle Traction Drive  

E-Print Network [OSTI]

system, additional heat, audible noise, mechanical stress, and vibration [1]. DC bus harmonic current- powered three-phase inverter is used to drive the traction motor. Due to the switching behavior combustion engine, electric motor, and energy storage device (for example, batteries and ultracapacitors

Tolbert, Leon M.

467

As part of its efforts to be ever more relevant to the needs of residents and communities of D.C., the University of the District of Columbia  

E-Print Network [OSTI]

.C., the University of the District of Columbia (UDC)* is offering training for participants interested in becoming of Agriculture, Urban Sustainability and Environmental Sciences (CAUSES) The University of the District of Columbia 4200 Connecticut Ave., NW Washington, DC 20008 8:30 a.m. - 5:00 p.m. Jan. 17 and 24 March 14

District of Columbia, University of the

468

Abstract--Layout of the conductor material in the dc bus of a photovoltaic (PV) array to lower first cost and ohmic losses is  

E-Print Network [OSTI]

its operating economy by reducing installed cost and ohmic losses. Index Terms--Photovoltaic systemsAbstract--Layout of the conductor material in the dc bus of a photovoltaic (PV) array to lower first cost and ohmic losses is reviewed. Six PV materials are characterized for their voltage swings

King, Roger

469

Books, co-authored 3 Ernst, J., M. C. Monroe, and B. Simmons. 2009. Evaluating your environmental education program. Washington DC: NAAEE.  

E-Print Network [OSTI]

. Environmental Problem Solving: Theory, Practice and Possibilities in Environmental Education. Troy OH: NAAEE Best Practices in Boating, Fishing, and Stewardship Education. Washington DC: Recreational BoatingBooks, co-authored 3 Ernst, J., M. C. Monroe, and B. Simmons. 2009. Evaluating your environmental

Hill, Jeffrey E.

470

Author's Copy: J.B. Bancroft, A. Morrison, G. Lachapelle, Validation of GNSS under 500,000 V Direct Current (DC) transmission lines, Computers and Electronics in Agriculture, Volume 83, April 2012, Pages 58-67, ISSN 0168-1699, 10.1016/j.compag.2012.01.013  

E-Print Network [OSTI]

masking by the towers. Tests were conducted under a set of three transmission lines, two 500 kV DC lines Current (DC) transmission lines, Computers and Electronics in Agriculture, Volume 83, April 2012, Pages 58 Validation of GNSS under 500,000 Volt Direct Current (DC) Transmission Lines J.B. Bancroft*, A. Morrison

Calgary, University of

471

Bi-directional dc-dc Converter  

Broader source: Energy.gov (indexed) [DOE]

Gate drive over -voltage protection T 1 SiC VJFET T 2 D 1 D 2 R g Built-in UV lockout 2008 DOE Merit Review Guidelines Preliminary, Experimental Gate-drive Results 11 V ds...

472

Bi-directional dc-dc Converter  

Broader source: Energy.gov (indexed) [DOE]

Custom Components Fabrication Components Validation Vehicle System Review with customer Delay of FY09 schedule Design Functional Validation, EMIEMC Production Planning PPAP, APQP...

473

Prioritizing Climate Change Mitigation Alternatives: Comparing Transportation Technologies to Options in Other Sectors  

E-Print Network [OSTI]

1, 2007. Regional Greenhouse Gas Initiative (RGGI), 2007.About RGGI. http://www.rggi.org/about.htm Accessed April 14,RI, VT, MD, Initiative d (RGGI) also DC and PA observing (

Lutsey, Nicholas P.

2008-01-01T23:59:59.000Z

474

Data:55194102-49ca-42cd-8c1c-0c853b7dc6ad | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of48d9ff47edf3a87dcc95b3da-78f7ef0b79f6 No revision has2fea1047f348 Nofc6-a764-ba6abe9d8e5fb1098be9dc853b7dc6ad

475

dc field-emission analysis of GaAs and plasma-source ion-implanted stainless steel  

SciTech Connect (OSTI)

Field-emission studies have been performed on a GaAs wafer and a sample of its stainless-steel (SS) support electrode that are part of a photocathode gun for the 10 kW Upgrade infrared free electron laser at Jefferson Lab. The objective of the studies presented here is to characterize the effect of both the cleanliness of the wafer and the plasma-source ion-implanted layer on the electrode to suppress field emission. Field emission is the limiting factor to achieve the required 6 MV/m at the surface of the wafer. Potential field emitters are first located on the surface of 1 in. diameter samples with a dc scanning field-emission microscope at 60 MV/m, then each emitter is characterized in a scanning electron microscope equipped with an energy dispersive spectrometer. The GaAs wafer was hydrogen cleaned before the study. The results show three emitters caused by indium contamination during wafer handling. The GaAs wafer thus shows good high-voltage characteristics and the need to maintain cleanliness during handling. The SS sample is hand polished with diamond paste to a 1-m surface finish, then implanted with N2/SiO2 in a plasma-source ion-implantation chamber in preparation for the field-emission studies.

C. Hernandez; T. Wang; T. Siggins; D. Bullard; H. F. Dylla; C. Reece; N. D. Theodore; D. M. Manos

2003-06-01T23:59:59.000Z

476

Preliminary study of CdTe and CdTe:Cu thin films nanostructures deposited by using DC magnetron sputtering  

SciTech Connect (OSTI)

Growth and properties of CdTe and CdTe:Cu thin films nanostrucures deposited by using dc magnetron sputtering are reported. Scanning electron microscope (SEM) was used to observe the surface morphologies of the thin films. At growth conditions of 250 °C and 14 W, CdTe films did not yet evenly deposited. However, at growth temperature and plasma power of 325 °C and 43 W, both CdTe and CdTe:Cu(2%) have deposited on the substrates. In this condition, the morphology of the films indicate that the films have a grain-like nanostructures. Grain size diameter of about 200 nm begin to appear on top of the films. Energy Dispersive X-rays spectroscopy (EDX) was used to investigate chemical elements of the Cu doped CdTe film deposited. It was found that the film deposited consist of Cd, Te and Cu elements. XRD was used to investigate the full width at half maximum (FWHM) values of the thin films deposited. The results show that CdTe:Cu(2%) thin film has better crystallographic properties than CdTe thin film. The UV-Vis spectrometer was used to investigate the optical properties of thin films deposited. The transmittance spectra showed that transmittance of CdTe:Cu(2%) film is lower than CdTe film. It was found that the bandgap energy of CdTe and CdTe:Cu(2%) thin films of about 1.48 eV.

Marwoto, Putut; Made, D. P. Ngurah; Sugianto [Departement of Physics, Faculty of Mathematics and Natural Sciences, Universitas Negeri Semarang, Gunungpati, Semarang 50229 Jawa Tengah (Indonesia)] [Departement of Physics, Faculty of Mathematics and Natural Sciences, Universitas Negeri Semarang, Gunungpati, Semarang 50229 Jawa Tengah (Indonesia); Wibowo, Edy; Astuti, Santi Yuli; Aryani, Nila Prasetya [Materials Research Group, Laboratory of Thin Film, Department of Physics, Universitas Negeri Semarang, Gunungpati, Semarang 50229 Jawa Tengah (Indonesia)] [Materials Research Group, Laboratory of Thin Film, Department of Physics, Universitas Negeri Semarang, Gunungpati, Semarang 50229 Jawa Tengah (Indonesia); Othaman, Zulkafli [Departement of Physics, Universiti Teknologi Malaysia (UTM), Skudai, Johor Bahru (Malaysia)] [Departement of Physics, Universiti Teknologi Malaysia (UTM), Skudai, Johor Bahru (Malaysia)

2013-09-03T23:59:59.000Z

477

Report of a workshop on nuclear forces and nonproliferation Woodrow Wilson international center for scholars, Washington, DC October 28, 2010  

SciTech Connect (OSTI)

A workshop sponsored by the Los Alamos National Laboratory in cooperation with the Woodrow Wilson International Center for Scholars was held at the Wilson Center in Washington, DC, on October 28, 2010. The workshop addressed evolving nuclear forces and their impacts on nonproliferation in the context of the new strategic environment, the Obama Administration's Nuclear Posture Review and the 2010 NPT Review Conference. The discussions reflected the importance of the NPR for defining the role of US nuclear forces in dealing with 21st century threats and providing guidance for National Nuclear Security Administration (NNSA) and Department of Defense (DoD) programs and, for many but not all participants, highlighted its role in the successful outcome of the NPT RevCon. There was widespread support for the NPR and its role in developing the foundations for a sustainable nuclear-weapon program that addresses nuclear weapons, infrastructure and expertise in the broader nonproliferation, disarmament and international security contexts. However, some participants raised concerns about its implementation and its long-term effectiveness and sustainability.

Pilat, Joseph F [Los Alamos National Laboratory

2010-12-08T23:59:59.000Z

478

Solar Decathlon Visitors Guide 2011, National Mall, West Potomac Park, Washington, D.C., September 23 - October 2, 2011 (Brochure)  

SciTech Connect (OSTI)

Guide to the student-designed houses, ten contests, exhibits, and workshops of the U.S. Department of Energy 2011 Solar Decathlon, held in Washington, D.C., from September 23 through October 2, 2011. Teams of college students designed and built the solar-powered houses on display here. They represent 13 U.S. states, five countries, and four continents. Now the teams are rising to the challenge by competing in 10 contests over nine days, with the championship trophy on the line. This is their time to shine. The 2011 teams may share a common goal - to design and build the best energy-efficient house powered by the sun - but their strategies are different. One house is made of precast concrete, while another 'dances' in response to its environment. Another house is meant to sit atop a building, proving the sky's the limit for energy innovation. Whatever your idea of sustainable living may be, you are bound to find it at the Solar Decathlon.

Not Available

2011-09-01T23:59:59.000Z

479

U.S. Department of Energy Hydrogen and Fuel Cells Program 2014 Annual Merit Review and Peer Evaluation Report: June 16-20, 2014, Washington, D.C.  

SciTech Connect (OSTI)

The fiscal year (FY) 2014 U.S. Department of Energy (DOE) Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Meeting (AMR), in conjunction with DOE's Vehicle Technologies Office AMR, was held from June 16-20, 2014, at the Washington Marriott Wardman Park in Washington, D.C. This report is a summary of comments by AMR peer reviewers about the hydrogen and fuel cell projects funded by DOE's Office of Energy Efficiency and Renewable Energy (EERE).

Not Available

2014-10-01T23:59:59.000Z

480

Development of a 10 kW High Temperature High Power Density Three-Phase AC-DC-AC SiC Converter  

SciTech Connect (OSTI)

This paper presents the development and experimental performance of a 10 kW, all SiC, 250 C junction temperature high-power-density three-phase ac-dc-ac converter. The electromagnetic interference filter, thermal system, high temperature package, and gate drive design are discussed in detail. Finally, tests confirming the feasibility and validating the theoretical basis of the prototype converter system are described.

Ning, Puqi [ORNL

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "ri nj dc" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Safety analysis report for packaging, Oak Ridge Y-12 Plant, model DC-1 package with HEU oxide contents. Change pages for Rev.1  

SciTech Connect (OSTI)

This Safety Analysis Report for Packaging for the Oak Ridge Y-12 Plant for the Model DC-1 package with highly enriched uranium (HEU) oxide contents has been prepared in accordance with governing regulations form the Nuclear Regulatory Commission and the Department of Transportation and orders from the Department of energy. The fundamental safety requirements addressed by these regulations and orders pertain to the containment of radioactive material, radiation shielding, and nuclear subcriticality. This report demonstrates how these requirements are met.

NONE

1995-01-18T23:59:59.000Z

482

Data:0bc3fbac-5d73-4774-a7dc-ef248ed37947 | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentratingRenewable-1a29da98863b No revision50528468dc1b

483

High energy electron fluxes in dc-augmented capacitively coupled plasmas. II. Effects on twisting in high aspect ratio etching of dielectrics  

SciTech Connect (OSTI)

In high aspect ratio (HAR) plasma etching of holes and trenches in dielectrics, sporadic twisting is often observed. Twisting is the randomly occurring divergence of a hole or trench from the vertical. Many causes have been proposed for twisting, one of which is stochastic charging. As feature sizes shrink, the fluxes of plasma particles, and ions in particular, into the feature become statistical. Randomly deposited charge by ions on the inside of a feature may be sufficient to produce lateral electric fields which divert incoming ions and initiate nonvertical etching or twisting. This is particularly problematic when etching with fluorocarbon gas mixtures where deposition of polymer in the feature may trap charge. dc-augmented capacitively coupled plasmas (dc-CCPs) have been investigated as a remedy for twisting. In these devices, high energy electron (HEE) beams having narrow angular spreads can be generated. HEEs incident onto the wafer which penetrate into HAR features can neutralize the positive charge and so reduce the incidence of twisting. In this paper, we report on results from a computational investigation of plasma etching of SiO{sub 2} in a dc-CCP using Ar/C{sub 4}F{sub 8}/O{sub 2} gas mixtures. We found that HEE beams incident onto the wafer are capable of penetrating into features and partially neutralizing positive charge buildup due to sporadic ion charging, thereby reducing the incidence of twisting. Increasing the rf bias power increases the HEE beam energy and flux with some indication of improvement of twisting, but there are also changes in the ion energy and fluxes, so this is not an unambiguous improvement. Increasing the dc bias voltage while keeping the rf bias voltage constant increases the maximum energy of the HEE and its flux while the ion characteristics remain nearly constant. For these conditions, the occurrence of twisting decreases with increasing HEE energy and flux.

Wang Mingmei [Department of Chemical and Biological Engineering, Iowa State University, Ames, Iowa 50010 (United States); Kushner, Mark J. [Department of Electrical Engineering and Computer Science, University of Michigan, 1301 Beal Ave., Ann Arbor, Michigan 48109 (United States)

2010-01-15T23:59:59.000Z

484

Effect of oxidizer on grain size and low temperature DC electrical conductivity of tin oxide nanomaterial synthesized by gel combustion method  

SciTech Connect (OSTI)

Nanocrystalline Tin oxide material with different grain size was synthesized using gel combustion method by varying the fuel (C{sub 6}H{sub 8}O{sub 7}) to oxidizer (HNO{sub 3}) molar ratio by keeping the amount of fuel as constant. The prepared samples were characterized by using X-Ray Diffraction (XRD), Scanning Electron Microscope (SEM) and Energy Dispersive Analysis X-ray Spectroscopy (EDAX). The effect of fuel to oxidizer molar ratio in the gel combustion method was investigated by inspecting the grain size of nano SnO{sub 2} powder. The grain size was found to be reduced with the amount of oxidizer increases from 0 to 6 moles in the step of 2. The X-ray diffraction patterns of the calcined product showed the formation of high purity tetragonal tin (IV) oxide with the grain size in the range of 12 to 31 nm which was calculated by Scherer's formula. Molar ratio and temperature dependence of DC electrical conductivity of SnO{sub 2} nanomaterial was studied using Keithley source meter. DC electrical conductivity of SnO{sub 2} nanomaterial increases with the temperature from 80K to 300K. From the study it was observed that the DC electrical conductivity of SnO{sub 2} nanomaterial decreases with the grain size at constant temperature.

Rajeeva, M. P., E-mail: jayanna60@gmail.com; Jayanna, H. S., E-mail: jayanna60@gmail.com; Ashok, R. L.; Naveen, C. S. [Department of P.G. Studies and Research in Physics, Kuvempu University, Jnanasahyadri, Shankarghatta, Shimoga- 577451, Karnataka (India); Bothla, V. Prasad [Department of Physics, Indian Institute of Science, Bangalore-560012 (India)

2014-04-24T23:59:59.000Z

485

Sharp transition between two regimes of operation of dc discharge with two anodes and thermionic emission from cathode  

SciTech Connect (OSTI)

In a dc discharge plasma with two anodes and thermionic emission from cathode, the two anodes are used for plasma control. The main anode is placed between the cathode and the other auxiliary anode has a circular opening for passing electron current from the cathode to the second anode. It is experimentally demonstrated that a plasma may exhibit a sudden transition between two quasi-stable conditions as one increases the cathode-electron current collected by the auxiliary anode through an aperture, i.e., hole, in the main anode. In one regime, a bright glowing “ball-shaped double layer” appears on the plasma side having a potential drop of 10–15?eV and concomitant ionization in the neighboring region attached to the opening. The second regime is characterized by a uniform potential profile in plasma and an absence of the ball-shaped double layer. The transition between these regimes is accompanied by a significant change in plasma properties, such as the electron energy distribution function (EEDF). Controlling the EEDF is a valuable capability in technological applications. Increasing the gas pressure leads to the elimination of the first regime for sufficiently high gas pressure, the threshold being a few Torr. The disappearance of a regime transition can be explained by invoking an EEDF transition, from being nonlocal at low pressure to becoming local at high pressure. Local EEDF is determined by local values of electric field. Nonlocal EEDF is determined by electric field values elsewhere, and the electron can travel without energy loss over a path much longer than the discharge dimension.

Mustafaev, A. S.; Grabovskiy, A. [National Mineral Resources University “Gorniy,” St. Petersburg 199106 (Russian Federation)] [National Mineral Resources University “Gorniy,” St. Petersburg 199106 (Russian Federation); Demidov, V. I. [West Virginia University, Morgantown, West Virginia 26506 (United States) [West Virginia University, Morgantown, West Virginia 26506 (United States); St. Petersburg State University, St. Petersburg 199034 (Russian Federation); University ITMO, Kronverkskiy pr. 49, St. Petersburg 197101 (Russian Federation); Kaganovich, I. D. [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States)] [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States); Koepke, M. E. [West Virginia University, Morgantown, West Virginia 26506 (United States)] [West Virginia University, Morgantown, West Virginia 26506 (United States)

2014-05-15T23:59:59.000Z

486

Building Scale DC Microgrids  

E-Print Network [OSTI]

Efficiency and Renewable Energy, Building TechnologiesEfficiency and Renewable Energy, Building Technologies

Marnay, Chris

2013-01-01T23:59:59.000Z

487

Building Scale DC Microgrids  

E-Print Network [OSTI]

Folsom CA, Integration of Renewable Resources: OperationalOffice of Energy Efficiency and Renewable Energy, Buildingwas only the world’s renewable generation almost triples,

Marnay, Chris

2014-01-01T23:59:59.000Z

488

Building Scale DC Microgrids  

E-Print Network [OSTI]

Folsom CA, Integration of Renewable Resources: OperationalOffice of Energy Efficiency and Renewable Energy, BuildingOffice of Energy Efficiency and Renewable Energy, Building

Marnay, Chris

2013-01-01T23:59:59.000Z

489

I ' Washington, DC'  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$ EGcG ENERGYELIkNATIONHEALXH: l ._ .r. .- .'

490

D.C.  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phases onOrganization FY 2012 FYCustomer-Commentsloadvances from

491

DC Circuits - Main Menu  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phases onOrganization FY 2012JDA 1/31/13 Jan 31, 2013 DATE:8:05 am, Mar0

492

article_dc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste andAnniversary, partReview of SIRSarchiveUV-RSSdryGOESAIRS5 U.S.

493

Tobin-DC  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism in Layered NbS2 andThe1A:decisional. 1 B O NAmes

494

Washington, DC,20585  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545 OCTTO:March 20, 1995WOCESSORS MODWQl

495

Washington, DC.20585  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545 OCTTO:March 20, 1995WOCESSORS MODWQl. .

496

Washington. DC,20585  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545 OCTTO:March 20, 1995WOCESSORS

497

Washington. DC.20585'  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545 OCTTO:March 20, 1995WOCESSORSDepartment

498

Washingtori, DC.20585  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$0.C. 20545 OCTTO:March 20,

499

Analysis of variable-frequency currents superimposed on DC currents in asynchronous HVDC Links in stressing turbine-generator-exciter shafts  

SciTech Connect (OSTI)

Ripple currents on the DC side of both HVDC asynchronous and synchronous Links can excite in some circumstances onerous torsional vibrations in large steam generator shafts. The problem has assumed importance in recent months on account of the HVDC Link between Scotland and Northern Ireland going ahead, on account of the proposed Eire/Wales Link, because AC/DC/AC couplers are to be installed to interconnect the East and West European Grid Systems, and because resonances have been observed on machines in close proximity to AC/DCIAC couplers and HVDC Links. This paper discusses and analyses excitation of shaft torsional vibrations in steam turbine-generator-exciter shafts in close proximity to HVDC converter stations by variable-frequency ripple currents superimposed on DC currents in asynchronous Links. It presents technical knowledge not arranged for convenient reference heretofore in studying possible excitation of turbine-generator-v/ exciter shaft torsional vibrations by non-characteristic HVDC converter harmonic currents if a machine should be considered to be at risk. Shaft torques in multi-machine networks are evaluated by proportioning HVDC Link disturbance currents to each machine at risk using system network data, generator data and fault analysis data considering frequency dependence of the system parameters. This scaling factor is calculated for different scenarios of system operation and load. Equivalent circuits for the synchronous generator are employed appropriately to correlate HVDC Link disturbance current impressed on the generator stator with s state torque excitation from which magnitude of turbine-generator-exciter shaft torque is deduced.

Hammons, T.J.; Bremner, J.J. [Univ. of Glasgow (United Kingdom)] [Univ. of Glasgow (United Kingdom)

1995-03-01T23:59:59.000Z

500

&RPSHWLWLYHQHVV (IIHFWV RI (QYLURQPHQWDO 7D[ 5HIRUPV  

E-Print Network [OSTI]

, Sweden and UK); analyses world market conditions for a set of energy- intensive sectors, as a framework and competitiveness impacts of us- ing carbon-energy taxes as an instrument of an Environmental Tax Reform (ETR), which shifts the tax burden and helps reduce the carbon emissions that cause global warming. COMETR