National Library of Energy BETA

Sample records for retention times view

  1. Drug Retention Times

    SciTech Connect (OSTI)

    Center for Human Reliability Studies

    2007-05-01

    The purpose of this monograph is to provide information on drug retention times in the human body. The information provided is based on plausible illegal drug use activities that might be engaged in by a recreational drug user.

  2. Drug Retention Times (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Country of Publication: United States Language: English Subject: 60 APPLIED LIFE SCIENCES; RETENTION; DRUG ABUSE; DRUGS; CRIME DETECTION drugs, retention Word Cloud More Like This ...

  3. Field Soil Water Retention of the Prototype Hanford Barrier and Its Variability with Space and Time

    SciTech Connect (OSTI)

    Zhang, Z. F.

    2015-08-14

    Engineered surface barriers are used to isolate underlying contaminants from water, plants, animals, and humans. To understand the flow processes within a barrier and the barrier’s ability to store and release water, the field hydraulic properties of the barrier need to be known. In situ measurement of soil hydraulic properties and their variation over time is challenging because most measurement methods are destructive. A multiyear test of the Prototype Hanford Barrier (PHB) has yielded in situ soil water content and pressure data for a nine-year period. The upper 2 m layer of the PHB is a silt loam. Within this layer, water content and water pressure were monitored at multiple depths at 12 water balance stations using a neutron probe and heat dissipation units. Valid monitoring data from 1995 to 2003 for 4 depths at 12 monitoring stations were used to determine the field water retention of the silt loam layer. The data covered a wide range of wetness, from near saturation to the permanent wilt point, and each retention curve contained 51 to 96 data points. The data were described well with the commonly used van Genuchten water retention model. It was found that the spatial variation of the saturated and residual water content and the pore size distribution parameter were relatively small, while that of the van Genuchten alpha was relatively large. The effects of spatial variability of the retention properties appeared to be larger than the combined effects of added 15% w/w pea gravel and plant roots on the properties. Neither of the primary hydrological processes nor time had a detectible effect on the water retention of the silt loam barrier.

  4. April 2013 Most Viewed Documents for Biology And Medicine | OSTI...

    Office of Scientific and Technical Information (OSTI)

    April 2013 Most Viewed Documents for Biology And Medicine Publications in biomedical and environmental sciences programs, 1981 Moody, J.B. (comp.) (1982) 306 Drug Retention Times ...

  5. The retention time of inorganic mercury in the brain — A systematic review of the evidence

    SciTech Connect (OSTI)

    Rooney, James P.K.

    2014-02-01

    Reports from human case studies indicate a half-life for inorganic mercury in the brain in the order of years—contradicting older radioisotope studies that estimated half-lives in the order of weeks to months in duration. This study systematically reviews available evidence on the retention time of inorganic mercury in humans and primates to better understand this conflicting evidence. A broad search strategy was used to capture 16,539 abstracts on the Pubmed database. Abstracts were screened to include only study types containing relevant information. 131 studies of interest were identified. Only 1 primate study made a numeric estimate for the half-life of inorganic mercury (227–540 days). Eighteen human mercury poisoning cases were followed up long term including autopsy. Brain inorganic mercury concentrations at death were consistent with a half-life of several years or longer. 5 radionucleotide studies were found, one of which estimated head half-life (21 days). This estimate has sometimes been misinterpreted to be equivalent to brain half-life—which ignores several confounding factors including limited radioactive half-life and radioactive decay from surrounding tissues including circulating blood. No autopsy cohort study estimated a half-life for inorganic mercury, although some noted bioaccumulation of brain mercury with age. Modelling studies provided some extreme estimates (69 days vs 22 years). Estimates from modelling studies appear sensitive to model assumptions, however predications based on a long half-life (27.4 years) are consistent with autopsy findings. In summary, shorter estimates of half-life are not supported by evidence from animal studies, human case studies, or modelling studies based on appropriate assumptions. Evidence from such studies point to a half-life of inorganic mercury in human brains of several years to several decades. This finding carries important implications for pharmcokinetic modelling of mercury and potentially for

  6. Sediment Retention

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sediment Retention Sediment Retention Tour LANL maintains hundreds of wells, stream sampling stations and stormwater control structures to protect waters.

  7. Sediment Retention

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sediment Retention Sediment Retention Tour LANL maintains hundreds of wells, stream sampling stations and stormwater control structures to protect waters.

  8. American Recovery and Reinvestment Act of 2009. Interim Report on Customer Acceptance, Retention, and Response to Time-Based Rates from the Consumer Behavior Studies

    SciTech Connect (OSTI)

    Cappers, Peter; Hans, Liesel; Scheer, Richard

    2015-06-01

    Time-based rate programs1, enabled by utility investments in advanced metering infrastructure (AMI), are increasingly being considered by utilities as tools to reduce peak demand and enable customers to better manage consumption and costs. There are several customer systems that are relatively new to the marketplace and have the potential for improving the effectiveness of these programs, including in-home displays (IHDs), programmable communicating thermostats (PCTs), and web portals. Policy and decision makers are interested in more information about customer acceptance, retention, and response before moving forward with expanded deployments of AMI-enabled new rates and technologies. Under the Smart Grid Investment Grant Program (SGIG), the U.S. Department of Energy (DOE) partnered with several utilities to conduct consumer behavior studies (CBS). The goals involved applying randomized and controlled experimental designs for estimating customer responses more precisely and credibly to advance understanding of time-based rates and customer systems, and provide new information for improving program designs, implementation strategies, and evaluations. The intent was to produce more robust and credible analysis of impacts, costs, benefits, and lessons learned and assist utility and regulatory decision makers in evaluating investment opportunities involving time-based rates. To help achieve these goals, DOE developed technical guidelines to help the CBS utilities estimate customer acceptance, retention, and response more precisely.

  9. Interim Report on Customer Acceptance, Retention, and Response...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Interim Report on Customer Acceptance, Retention, and Response to Time-Based Rates from the Consumer Behavior Studies (June 2015) Interim Report on Customer Acceptance, Retention, ...

  10. Interim Report on Consumer Acceptance, Retention, and response to Time-based rates from the Consumer Behavior Studies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. Department of Energy |June 2015 Interim Report on Impacts from the Consumer Behavior Studies | Page ii Table of Contents Executive Summary .............................................................................................................. iv 1. Introduction ................................................................................................................... 1 1.1 Background about Time-Based Rates and Advanced Metering Infrastructure ............ 1 1.2 Overview of

  11. Pulmonary retention of coal dusts

    SciTech Connect (OSTI)

    Morrow, P.E.; Gibb, F.R.; Beiter, H.; Amato, F.; Yuile, C.; Kilpper, R.W.

    1980-01-01

    The principal objectives of this study were: to determine, quantitatively, coal dust retention times in the dog lung; to test the appropriateness of a pulmonary retention model which incorporates first order rate coefficients obtained from in vitro and in vivo experiments on neutron-activated coal; to acquire a temporal description of the pulmonary disposition of the retained coal dust, and to compare the behavior of two different Pennsylvania coals in the foregoing regards. The principal findings include: retention half-times for both coals of approximately 2 years following single, hour-long exposures; a vivid association of the retained coal dust with the pulmonic lymphatics; and a general validation of the retention model.

  12. Registration of clinical volumes to beams-eye-view images for real-time tracking

    SciTech Connect (OSTI)

    Bryant, Jonathan H.; Rottmann, Joerg; Lewis, John H.; Mishra, Pankaj; Berbeco, Ross I.; Keall, Paul J.

    2014-12-15

    Purpose: The authors combine the registration of 2D beam’s eye view (BEV) images and 3D planning computed tomography (CT) images, with relative, markerless tumor tracking to provide automatic absolute tracking of physician defined volumes such as the gross tumor volume (GTV). Methods: During treatment of lung SBRT cases, BEV images were continuously acquired with an electronic portal imaging device (EPID) operating in cine mode. For absolute registration of physician-defined volumes, an intensity based 2D/3D registration to the planning CT was performed using the end-of-exhale (EoE) phase of the four dimensional computed tomography (4DCT). The volume was converted from Hounsfield units into electron density by a calibration curve and digitally reconstructed radiographs (DRRs) were generated for each beam geometry. Using normalized cross correlation between the DRR and an EoE BEV image, the best in-plane rigid transformation was found. The transformation was applied to physician-defined contours in the planning CT, mapping them into the EPID image domain. A robust multiregion method of relative markerless lung tumor tracking quantified deviations from the EoE position. Results: The success of 2D/3D registration was demonstrated at the EoE breathing phase. By registering at this phase and then employing a separate technique for relative tracking, the authors are able to successfully track target volumes in the BEV images throughout the entire treatment delivery. Conclusions: Through the combination of EPID/4DCT registration and relative tracking, a necessary step toward the clinical implementation of BEV tracking has been completed. The knowledge of tumor volumes relative to the treatment field is important for future applications like real-time motion management, adaptive radiotherapy, and delivered dose calculations.

  13. Work Force Retention Work Group Charter | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Force Retention Work Group Charter Work Force Retention Work Group Charter The Work force Retention Work Group is established to support the Department's critical focus on maintaining a high-performing work force at a time when a significant number of the workers needed to support DOE's national security mission are reaching retirement age. Work Force Retention Work Group Charter (86.92 KB) More Documents & Publications Workforce Retention Work Group Status Overview - September 2012 Training

  14. Time-local view of nonequilibrium statistical mechanics. II. Generalized Langevin equations

    SciTech Connect (OSTI)

    Der, R.

    1987-01-01

    On a semiphenomenological level, generalized Langevin equations are usually obtained by adding a random force (RF) term to macroscopic deterministic equations assumed to be known. Here this procedure is made rigorous by conveniently redefining the RF, which is shown to be colored noise weakly correlated with the observables at earlier times due to the finite lifetime of microscopic events. Corresponding fluctuation-dissipation theorems are derived. Explicit expressions for the spectral density of the fluctuations are obtained in a particularly simple form, with the deviation of the line shape from the Lorentzian being related most explicitly to the spectral density of the RF. Well-known low-frequency expressions and the Einstein relation of (generalized) Brownian motion theory are modified so as to include lifetime effects. New sum rules are obtained relating dissipative quantities to contour integrals (in the complex frequency domain) over spectral densities or corresponding response functions. The Heisenberg dynamics of a complete set of macroobservables is shown to be equivalent to a generalized Orstein-Uhlenbeck stochastic process which is a non-Markovian process due to the lifetime effects.

  15. Report: Employee Recruitment and Retention

    Office of Environmental Management (EM)

    EMPLOYEE RECRUITMENT AND RETENTION Background Beginning in Fiscal Year (FY) 2006, the ... and provide advice on the urgent matter of EM's employee recruitment and retention. ...

  16. Now Available: Interim Report on Customer Acceptance, Retention...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Interim Report on Customer Acceptance, Retention, and Response to Time-Based Rates from the Consumer Behavior Studies Now Available: Interim Report on Customer Acceptance, ...

  17. Design Storm for Total Retention.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Title: Design Storm for "Total Retention" under Individual Permit, Poster, Individual ... International. Environmental Programs Design Storm for "Total Retention" under ...

  18. Interim Report on Customer Acceptance, Retention, and Response to

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Time-Based Rates from the Consumer Behavior Studies (June 2015) | Department of Energy Interim Report on Customer Acceptance, Retention, and Response to Time-Based Rates from the Consumer Behavior Studies (June 2015) Interim Report on Customer Acceptance, Retention, and Response to Time-Based Rates from the Consumer Behavior Studies (June 2015) Since 2009, the U.S. Department of Energy, using funds from the American Recovery and Reinvestment Act, and the electric power industry have jointly

  19. Protections: Sediment Control = Contaminant Retention

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sediment Control Protections: Sediment Control Contaminant Retention LANL maintains hundreds of wells, stream sampling stations and stormwater control structures to protect...

  20. ThreatView

    Energy Science and Technology Software Center (OSTI)

    2007-09-25

    The ThreatView project is based on our prior work with the existing ParaView open-source scientific visualization application. Where ParaView provides a grapical client optimized scientific visualization over the VTK parallel client server architecture, ThreatView provides a client optimized for more generic visual analytics over the same architecture. Because ThreatView is based on the VTK parallel client-server architecture, data sources can reside on remote hosts, and processing and rendering can be performed in parallel. As seenmore » in Fig. 1, ThreatView provides four main methods for visualizing data: Landscape View, which displays a graph using a landscape metaphor where clusters of graph nodes produce "hills" in the landscape; Graph View, which displays a graph using a traditional "ball-and-stick" style; Table View, which displays tabular data in a standard spreadsheet; and Attribute View, which displays a tabular "histogram" of input data - for a selected table column, the Attribute View displays each unique value within the column, and the number of times that value appears in the data. There are two supplemental view types: Text View, which displays tabular data one-record-at-a-time; and the Statistics View, which displays input metadata, such as the number of vertices and edges in a graph, the number of rows in a table, etc.« less

  1. Molten core retention assembly

    DOE Patents [OSTI]

    Lampe, Robert F.

    1976-06-22

    Molten fuel produced in a core overheating accident is caught by a molten core retention assembly consisting of a horizontal baffle plate having a plurality of openings therein, heat exchange tubes having flow holes near the top thereof mounted in the openings, and a cylindrical, imperforate baffle attached to the plate and surrounding the tubes. The baffle assembly is supported from the core support plate of the reactor by a plurality of hanger rods which are welded to radial beams passing under the baffle plate and intermittently welded thereto. Preferably the upper end of the cylindrical baffle terminates in an outwardly facing lip to which are welded a plurality of bearings having slots therein adapted to accept the hanger rods.

  2. September 2013 Most Viewed Documents for Biology And Medicine | OSTI, US

    Office of Scientific and Technical Information (OSTI)

    Dept of Energy Office of Scientific and Technical Information September 2013 Most Viewed Documents for Biology And Medicine Drug Retention Times Center for Human Reliability Studies (2007) 29 Oleoresin Capsicum toxicology evaluation and hazard review Archuleta, M.M. (1995) 27 SURVEY OF NOISE SUPPRESSION SYSTEMS FOR ENGINE GENERATOR SETS. KRISHNA,C.R. (1999) 27 Site-Directed Research and Development FY 2012 Annual Report , (2013) 27 Human radiation studies: Remembering the early years. Oral

  3. September 2015 Most Viewed Documents for Biology And Medicine | OSTI, US

    Office of Scientific and Technical Information (OSTI)

    Dept of Energy Office of Scientific and Technical Information September 2015 Most Viewed Documents for Biology And Medicine Measuring dopamine release in the human brain with PET Volkow, N.D. [Brookhaven National Lab., Upton, NY (United States)]|[State Univ. of New York at Stony Brook, Stony Brook, NY (United States). Dept. of Psychiatry]; Fowler, J.S.; Logan, J.; Wang, G.J. [Brookhaven National Lab., Upton, NY (United States)] (1995) 168 Drug Retention Times Center for Human Reliability

  4. April 2013 Most Viewed Documents for Biology And Medicine | OSTI, US Dept

    Office of Scientific and Technical Information (OSTI)

    of Energy Office of Scientific and Technical Information April 2013 Most Viewed Documents for Biology And Medicine Publications in biomedical and environmental sciences programs, 1981 Moody, J.B. (comp.) (1982) 306 Drug Retention Times Center for Human Reliability Studies (2007) 99 SURVEY OF NOISE SUPPRESSION SYSTEMS FOR ENGINE GENERATOR SETS. KRISHNA,C.R. (1999) 95 Defining the Effectiveness of UV Lamps Installed in Circulating Air Ductwork Douglas VanOsdell; Karin Foarde (2002) 84

  5. December 2015 Most Viewed Documents for Biology And Medicine | OSTI, US

    Office of Scientific and Technical Information (OSTI)

    Dept of Energy Office of Scientific and Technical Information December 2015 Most Viewed Documents for Biology And Medicine Measuring dopamine release in the human brain with PET Volkow, N.D. [Brookhaven National Lab., Upton, NY (United States)]|[State Univ. of New York at Stony Brook, Stony Brook, NY (United States). Dept. of Psychiatry]; Fowler, J.S.; Logan, J.; Wang, G.J. [Brookhaven National Lab., Upton, NY (United States)] (1995) 160 Drug Retention Times Center for Human Reliability

  6. Most Viewed Documents for Biology and Medicine: December 2014 | OSTI, US

    Office of Scientific and Technical Information (OSTI)

    Dept of Energy Office of Scientific and Technical Information Most Viewed Documents for Biology and Medicine: December 2014 Dose and volume specification for reporting interstitial therapy NONE (1997) 38 Modification to the Monte Carlo N-Particle (MCNP) Visual Editor (MCNPVised) to Read in Computer Aided Design (CAD) Files Randolph Schwarz; Leland L. Carter; Alysia Schwarz (2005) 38 Drug Retention Times Center for Human Reliability Studies (2007) 34 Degradation of high concentrations of

  7. Technetium Retention During LAW Vitrification

    Office of Environmental Management (EM)

    (1% I) for LAWE7H (AN-102, high organics) * 18% Tc (22% I) for LAWE3 (AP-101, high K) * Sugar most effective organic reductant for Tc and I retention * 15-20% absolute increase...

  8. Retention of Halogens in Waste Glass

    SciTech Connect (OSTI)

    Hrma, Pavel R.

    2010-05-01

    In spite of their potential roles as melting rate accelerators and foam breakers, halogens are generally viewed as troublesome components for glass processing. Of five halogens, F, Cl, Br, I, and At, all but At may occur in nuclear waste. A nuclear waste feed may contain up to 10 g of F, 4 g of Cl, and ?100 mg of Br and I per kg of glass. The main concern is halogen volatility, producing hazardous fumes and particulates, and the radioactive iodine 129 isotope of 1.7x10^7-year half life. Because F and Cl are soluble in oxide glasses and tend to precipitate on cooling, they can be retained in the waste glass in the form of dissolved constituents or as dispersed crystalline inclusions. This report compiles known halogen-retention data in both high-level waste (HLW) and low-activity waste (LAW) glasses. Because of its radioactivity, the main focus is on I. Available data on F and Cl were compiled for comparison. Though Br is present in nuclear wastes, it is usually ignored; no data on Br retention were found.

  9. Now Available: Interim Report on Customer Acceptance, Retention, and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Response to Time-Based Rates from the Consumer Behavior Studies | Department of Energy Interim Report on Customer Acceptance, Retention, and Response to Time-Based Rates from the Consumer Behavior Studies Now Available: Interim Report on Customer Acceptance, Retention, and Response to Time-Based Rates from the Consumer Behavior Studies June 26, 2015 - 5:30pm Addthis Since 2009, the U.S. Department of Energy, using funds from the American Recovery and Reinvestment Act, and the electric power

  10. Radionuclide Retention in Concrete Wasteforms (Technical Report...

    Office of Scientific and Technical Information (OSTI)

    likely to influence radionuclide migration; and (2) quantifies the rate of ... RADIOISOTOPES; RADIONUCLIDE MIGRATION; RETENTION; SORPTION; WASTE FORMS; ...

  11. Workforce Retention Work Group | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Workforce Retention Work Group Workforce Retention Work Group The Workforce Retention Work Group was established to collaboratively address the needs of the Department to maintain a skilled work force in the face of anticipated retirements and to address the specific health and safety concerns of that work force that could impede retention. Due to the broad nature of the issues reflected within this working group, the chartered objectives and outcomes have been moved forward to be worked by the

  12. Most Viewed Documents for Biology and Medicine: December 2014...

    Office of Scientific and Technical Information (OSTI)

    N-Particle (MCNP) Visual Editor (MCNPVised) to Read in Computer Aided Design (CAD) Files Randolph Schwarz; Leland L. Carter; Alysia Schwarz (2005) 38 Drug Retention Times ...

  13. Most Viewed Documents - Biology and Medicine | OSTI, US Dept...

    Office of Scientific and Technical Information (OSTI)

    - Biology and Medicine Drug Retention Times Center for Human Reliability Studies (2007) External dose-rate conversion factors for calculation of dose to the public Not Available ...

  14. Protections: Sediment Control = Contaminant Retention

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sediment Control Protections: Sediment Control = Contaminant Retention LANL maintains hundreds of wells, stream sampling stations and stormwater control structures to protect waters. August 1, 2013 Los Alamos Canyon weir Los Alamos Canyon weir thumbnail of Protection #2: Trap and Remove Sediment Sediment behind LA Canyon weir is sampled and excavated regularly. As of 2012, no sediment required disposal as hazardous or radioactive waste. RELATED IMAGES

  15. Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 4 5 6 7 8 9 10 Time with respect to the BNB Trigger Time [µs] 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Fractional Flash Count per 0.15 µs with respect to Cosmic Background Measured Cosmic Rate (Beam-Off) BNB Trigger Data (Beam-On) [4.51E18 POT]

  16. Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    10 15 20 Time with respect to the NuMI Trigger Time [µs] 0.9 1.0 1.1 1.2 1.3 1.4 1.5 Fractional Flash Count per 0.5 µs with respect to Cosmic Background Measured Cosmic Rate (Beam-Off) NuMI Trigger Data (Beam-On) [4.83E18 POT]

  17. March 2015 Most Viewed Documents for Biology And Medicine | OSTI, US Dept

    Office of Scientific and Technical Information (OSTI)

    of Energy Office of Scientific and Technical Information 5 Most Viewed Documents for Biology And Medicine Measuring dopamine release in the human brain with PET Volkow, N.D. [Brookhaven National Lab., Upton, NY (United States)]|[State Univ. of New York at Stony Brook, Stony Brook, NY (United States). Dept. of Psychiatry]; Fowler, J.S.; Logan, J.; Wang, G.J. [Brookhaven National Lab., Upton, NY (United States)] (1995) 134 Drug Retention Times Center for Human Reliability Studies (2007) 114

  18. DOE Handbook on Recruitment and Retention Incentives

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Desk Reference On Recruitment and Retention Incentives April 2012 Office of the Chief Human Capital Officer 2 Table of Contents Page Introduction 3 Part I - Sample Incentive Plans A. Recruitment Incentives 4 B. Relocation Incentives 8 C. Retention Incentives 12 D. Student Loan Repayments 16 Part II - Sample Service Agreements A. Recruitment Agreement 21 B. Relocation Agreement 25 C. Retention Agreement 29 D. Student Loan Repayment Program (SLRP) Agreement 33 Part III - Sample Incentive

  19. Charge Retention by Organometallic Dications on Self-Assembled...

    Office of Scientific and Technical Information (OSTI)

    Charge Retention by Organometallic Dications on Self-Assembled Monolayer Surfaces Citation Details In-Document Search Title: Charge Retention by Organometallic Dications on ...

  20. Surprisingly Large Generation and Retention of Helium and Hydrogen...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Surprisingly Large Generation and Retention of Helium and Hydrogen in ... Title: Surprisingly Large Generation and Retention of Helium and Hydrogen in Pure Nickel ...

  1. DOE Handbook on Recruitment and Retention Incentives | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Handbook on Recruitment and Retention Incentives DOE Handbook on Recruitment and Retention Incentives This desk reference contains sample recruitment, relocation, retention, and student loan incentive plans and service agreements for eligible employees; sample worksheets to assist in documenting the justification and approvals for all types of recruitment and retention incentives; information on superior qualification determinations; guidance and sample documents regarding crediting

  2. ADDITIVE TESTING FOR IMPROVED SULFUR RETENTION: PRELIMINARY REPORT

    SciTech Connect (OSTI)

    Amoroso, J.; Fox, K.

    2011-09-07

    The Savannah River National Laboratory is collaborating with Alfred University to evaluate the potential for additives in borosilicate glass to improve sulfur retention. This preliminary report provides further background on the incorporation of sulfur in glass and outlines the experiments that are being performed by the collaborators. A simulated waste glass composition has been selected for the experimental studies. The first phase of experimental work will evaluate the impacts of BaO, PbO, and V{sub 2}O{sub 5} at concentrations of 1.0, 2.0, and 5.0 wt % on sulfate retention in simulated high level waste borosilicate glass. The second phase of experimental work will evaluate the effects of time at the melt temperature on sulfur retention. The resulting samples will be characterized to determine the amount of sulfur remaining as well as to identify the formation of any crystalline phases. The results will be used to guide the future selection of frits and glass forming chemicals in vitrifying Department of Energy wastes containing high sulfur concentrations.

  3. Drug Retention Times (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    DOE Contract Number: DE-AC05-06OR23100 Resource Type: Technical Report Research Org: Oak Ridge Institute for Science and Education (ORISE), Oak Ridge, TN Sponsoring Org: USDOE - ...

  4. Sample Retention Incentive Service Agreement

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    work will be (50% of the number that the employee would work if full-time; normally 40). ... determines that no other qualified employee is available to perform the required ...

  5. Safeguards Workforce Repatriation, Retention and Utilization

    SciTech Connect (OSTI)

    Gallucci, Nicholas; Poe, Sarah

    2015-10-01

    Brookhaven National Laboratory was tasked by NA-241 to assess the transition of former IAEA employees back to the United States, investigating the rate of retention and overall smoothness of the repatriation process among returning safeguards professionals. Upon conducting several phone interviews, study authors found that the repatriation process went smoothly for the vast majority and that workforce retention was high. However, several respondents expressed irritation over the minimal extent to which their safeguards expertise had been leveraged in their current positions. This sentiment was pervasive enough to prompt a follow-on study focusing on questions relating to the utilization rather than the retention of safeguards professionals. A second, web-based survey was conducted, soliciting responses from a larger sample pool. Results suggest that the safeguards workforce may be oversaturated, and that young professionals returning to the United States from Agency positions may soon encounter difficulties finding jobs in the field.

  6. The View from HQ

    National Nuclear Security Administration (NNSA)

    A publication of the Office of Advanced Simulation & Computing, NNSA Defense Programs NA-ASC-500-07-Issue 3 May 2007 The View from HQ by Dimitri Kusnezov I have been spending much of my time these days thinking about science, technology and engineering and the role of the laboratories and how that will be reflected in the Complex of the future. This is on my mind for two reasons: one is my responsibility to produce a science and technology roadmap for Complex 2030-Defense Program's vision

  7. High temperature ceramic composition for hydrogen retention

    DOE Patents [OSTI]

    Webb, R.W.

    1974-01-01

    A ceramic coating for H retention in fuel elements is described. The coating has relatively low thermal neutron cross section, is not readily reduced by H at 1500 deg F, is adherent to the fuel element base metal, and is stable at reactor operating temperatures. (JRD)

  8. JOBAID-VIEWING USER RECORDS

    Broader source: Energy.gov [DOE]

    In this job aid you will View To-Do List using Filter and View options, View Completed Work, and View Curriculum Status and Detials areas. 

  9. Workforce Retention Work Group Status Overview - September 2012 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy September 2012 Workforce Retention Work Group Status Overview - September 2012 Documents Available for Download September 2012 Status Overviews (103.95 KB) More Documents & Publications Workforce Retention Work Group Status Overview - July 2012 Work Force Retention Work Group Charter Work Group Telecon (Final Charters)

  10. 300 Area Building Retention Evaluation Mitigation Plan

    SciTech Connect (OSTI)

    D. J. McBride

    2007-07-03

    Evaluate the long-term retention of several facilities associated with the PNNL Capability Replacement Laboratory and other Hanfor mission needs. WCH prepared a mitigation plan for three scenarios with different release dates for specific buildings. The evaluations present a proposed plan for providing utility services to retained facilities in support of a long-term (+20 year) lifespan in addition to temporary services to buildings with specified delayed release dates.

  11. A stochastic simulation method for the assessment of resistive random access memory retention reliability

    SciTech Connect (OSTI)

    Berco, Dan Tseng, Tseung-Yuen

    2015-12-21

    This study presents an evaluation method for resistive random access memory retention reliability based on the Metropolis Monte Carlo algorithm and Gibbs free energy. The method, which does not rely on a time evolution, provides an extremely efficient way to compare the relative retention properties of metal-insulator-metal structures. It requires a small number of iterations and may be used for statistical analysis. The presented approach is used to compare the relative robustness of a single layer ZrO{sub 2} device with a double layer ZnO/ZrO{sub 2} one, and obtain results which are in good agreement with experimental data.

  12. A common-view disciplined oscillator

    SciTech Connect (OSTI)

    Lombardi, Michael A.; Dahlen, Aaron P.

    2010-05-15

    This paper describes a common-view disciplined oscillator (CVDO) that locks to a reference time scale through the use of common-view global positioning system (GPS) satellite measurements. The CVDO employs a proportional-integral-derivative controller that obtains near real-time common-view GPS measurements from the internet and provides steering corrections to a local oscillator. A CVDO can be locked to any time scale that makes real-time common-view data available and can serve as a high-accuracy, self-calibrating frequency and time standard. Measurement results are presented where a CVDO is locked to UTC(NIST), the coordinated universal time scale maintained at the National Institute of Standards and Technology in Boulder, Colorado.

  13. Static ferroelectric memory transistor having improved data retention

    DOE Patents [OSTI]

    Evans, Jr., Joseph T.; Warren, William L.; Tuttle, Bruce A.

    1996-01-01

    An improved ferroelectric FET structure in which the ferroelectric layer is doped to reduce retention loss. A ferroelectric FET according to the present invention includes a semiconductor layer having first and second contacts thereon, the first and second contacts being separated from one another. The ferroelectric FET also includes a bottom electrode and a ferroelectric layer which is sandwiched between the semiconductor layer and the bottom electrode. The ferroelectric layer is constructed from a perovskite structure of the chemical composition ABO.sub.3 wherein the B site comprises first and second elements and a dopant element that has an oxidation state greater than +4 in sufficient concentration to impede shifts in the resistance measured between the first and second contacts with time. The ferroelectric FET structure preferably comprises Pb in the A-site. The first and second elements are preferably Zr and Ti, respectively. The preferred B-site dopants are Niobium, Tantalum, and Tungsten at concentrations between 1% and 8%.

  14. Cooking utensil with improved heat retention

    DOE Patents [OSTI]

    Potter, T.F.; Benson, D.K.; Burch, S.D.

    1997-07-01

    A cooking utensil with improved heat retention includes an inner pot received within an outer pot and separated in a closely spaced-apart relationship to form a volume or chamber there between. The chamber is evacuated and sealed with foil leaves at the upper edges of the inner and outer pot. The vacuum created between the inner and outer pot, along with the minimum of thermal contact between the inner and outer pot, and the reduced radiative heat transfer due to low emissivity coatings on the inner and outer pot, provide for a highly insulated cooking utensil. Any combination of a plurality of mechanisms for selectively disabling and re-enabling the insulating properties of the pot are provided within the chamber. These mechanisms may include: a hydrogen gas producing and reabsorbing device such as a metal hydride, a plurality of metal contacts which can be adjusted to bridge the gap between the inner and outer pot, and a plurality of bimetallic switches which can selectively bridge the gap between the inner and outer pot. In addition, phase change materials with superior heat retention characteristics may be provided within the cooking utensil. Further, automatic and programmable control of the cooking utensil can be provided through a microprocessor and associated hardware for controlling the vacuum disable/enable mechanisms to automatically cook and save food. 26 figs.

  15. Cooking utensil with improved heat retention

    DOE Patents [OSTI]

    Potter, Thomas F.; Benson, David K.; Burch, Steven D.

    1997-01-01

    A cooking utensil with improved heat retention includes an inner pot received within an outer pot and separated in a closely spaced-apart relationship to form a volume or chamber therebetween. The chamber is evacuated and sealed with foil leaves at the upper edges of the inner and outer pot. The vacuum created between the inner and outer pot, along with the minimum of thermal contact between the inner and outer pot, and the reduced radiative heat transfer due to low emissivity coatings on the inner and outer pot, provide for a highly insulated cooking utensil. Any combination of a plurality of mechanisms for selectively disabling and re-enabling the insulating properties of the pot are provided within the chamber. These mechanisms may include: a hydrogen gas producing and reabsorbing device such as a metal hydride, a plurality of metal contacts which can be adjusted to bridge the gap between the inner and outer pot, and a plurality of bimetallic switches which can selectively bridge the gap between the inner and outer pot. In addition, phase change materials with superior heat retention characteristics may be provided within the cooking utensil. Further, automatic and programmable control of the cooking utensil can be provided through a microprocessor and associated hardware for controlling the vacuum disable/enable mechanisms to automatically cook and save food.

  16. Radionuclide Retention in Concrete Wasteforms - FY13

    SciTech Connect (OSTI)

    Snyder, Michelle MV; Golovich, Elizabeth C.; Wellman, Dawn M.; Crum, Jarrod V.; Lapierre, Robert; Dage, Denomy C.; Parker, Kent E.; Cordova, Elsa A.

    2013-10-15

    Assessing long-term performance of Category 3 waste cement grouts for radionuclide encasement requires knowledge of the radionuclide-cement interactions and mechanisms of retention (i.e., sorption or precipitation); the mechanism of contaminant release; the significance of contaminant release pathways; how wasteform performance is affected by the full range of environmental conditions within the disposal facility; the process of wasteform aging under conditions that are representative of processes occurring in response to changing environmental conditions within the disposal facility; the effect of wasteform aging on chemical, physical, and radiological properties; and the associated impact on contaminant release. This knowledge will enable accurate prediction of radionuclide fate when the wasteforms come in contact with groundwater. Data collected throughout the course of this work will be used to quantify the efficacy of concrete wasteforms, similar to those used in the disposal of low-level waste and mixed low-level waste, for the immobilization of key radionuclides (i.e., uranium, technetium, and iodine). Data collected will also be used to quantify the physical and chemical properties of the concrete affecting radionuclide retention.

  17. July 2012, Work Force Retention Work Group Status Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Work Force Retention Work Group Status Overview Accomplishments: 1. Progress on the completion of the 10 CFR 1046 modifications to address barriers to workforce retention. Written response to public comment is being drafted by HS-51. 2. Pro-Force (PF) union representative, Randy Lawson, identified this accomplishment as the single most significant step toward PF workforce retention in over 20 years. 3. Draft re-charter of PF Career Options Committee (PFCOC) to establish a PF Working Group

  18. EISPC White Paper on "State Approaches to Retention of Nuclear...

    Broader source: Energy.gov (indexed) [DOE]

    The Eastern Interconnection States' Planning Collaborative (EISPC) has released a white paper on "State Approaches to Retention of Nuclear Power Plants" that examines operational, ...

  19. Volatile Species Retention During Metallic Fuel Casting

    SciTech Connect (OSTI)

    Randall S. Fielding; Douglas L. Proter

    2013-10-01

    Metallic nuclear fuels are candidate transmutation fuel forms for advanced fuel cycles. Through the operation of the Experimental Breeder Reactor II metallic nuclear fuels have been shown to be robust and easily manufactured. However, concerns have been raised concerning loss of americium during the casting process because of its high vapor pressure. In order to address these concerns a gaseous diffusion model was developed and a series of experiments using both manganese and samarium as surrogates for americium were conducted. The modeling results showed that volatility losses can be controlled to essentially no losses with a modest overpressure. Experimental results also showed volatile species retention down to no detectable losses through overpressure, although the loss values varied from the model results the same trend was seen. Bases on these results it is very probably that americium losses through volatility can be controlled to no detectable losses through application of a modest overpressure during casting.

  20. 207-A retention basins system design description

    SciTech Connect (OSTI)

    Wahlquist, R.A.

    1994-09-29

    The 242-A Evaporator is a waste treatment facility designed to reduce liquid waste volumes currently stored in the Hanford Area double shell Waste Storage Tanks. The evaporator uses evaporative concentration to achieve this volume reduction, returning the concentrated slurry to the double-shell tanks for storage. The process effluent is transferred to various retention/treatment facilities for eventual release to the environment. The process utilizes an evaporator vessel and various supporting systems for heating, evaporating, and condensing low-heat-generating liquid waste produced it the Hanford Site. The process reduces the total volume of the liquid waste requiring storage in a double shell tank, making it more manageable for current storage as well as for future treatment and disposal. The main components of the 242-A Evaporator are the Reboiler, Vapor-Liquid Separator, Recirculation Pump and Pump Loop, Slurry System, Condenser System, Steam Jet Vacuum System, Condensate Collection Tank, and Ion Exchange System.

  1. Workforce Retention Work Group Status Overview - July 2012 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy July 2012 Workforce Retention Work Group Status Overview - July 2012 Documents Available for Download July 2012 Status Overviews (86.1 KB) More Documents & Publications Workforce Retention Work Group Status Overview - September 2012 Strategic Initiatives Work Group Status Overview - July 2012 10 CFR 851 Work Group Status Overview - July 2012

  2. Water retention and gas relative permeability of two industrial concretes

    SciTech Connect (OSTI)

    Chen Wei; Liu Jian; Brue, Flore; Skoczylas, Frederic; Davy, C.A.; Bourbon, Xavier; Talandier, Jean

    2012-07-15

    This experimental study aims at identifying the water retention properties of two industrial concretes to be used for long term underground nuclear waste storage structures. Together with water retention, gas transfer properties are identified at varying water saturation level, i.e. relative gas permeability is assessed directly as a function of water saturation level S{sub w}. The influence of the initial de-sorption path and of the subsequent re-saturation are analysed both in terms of water retention and gas transfer properties. Also, the influence of concrete microstructure upon water retention and relative gas permeability is assessed, using porosity measurements, analysis of the BET theory from water retention properties, and MIP. Finally, a single relative gas permeability curve is proposed for each concrete, based on Van Genuchten-Mualem's statistical model, to be used for continuous modelling approaches of concrete structures, both during drying and imbibition.

  3. Taking the long view

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Taking the long view Taking the long view on environmental stewardship A newly articulated mission for environmental stewardship at the Laboratory can be summed up in a simple phrase: clean up the past, control current operations, and create a sustainable future. March 20, 2012 Los Alamos Aerial Aerial view of a canyon in Los Alamos, New Mexico. Contact Environmental Communication & Public Outreach P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email "The future viability of

  4. Taking the long view

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2012 Los Alamos Aerial Aerial view of a canyon in Los Alamos, New Mexico. Contact Environmental Communication & Public Outreach P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505)...

  5. ParaView

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... program in step 4 above. 1. Open ParaView and select File->Connect from the menu. 5. The server config script will start an xterm allowing you to login to the selected system. ...

  6. Formation and retention of methane in coal

    SciTech Connect (OSTI)

    Hucka, V.J.; Bodily, D.M.; Huang, H.

    1992-05-15

    The formation and retention of methane in coalbeds was studied for ten Utah coal samples, one Colorado coal sample and eight coal samples from the Argonne Premium Coal Sample Bank.Methane gas content of the Utah and Colorado coals varied from zero to 9 cm{sup 3}/g. The Utah coals were all high volatile bituminous coals. The Colorado coal was a gassy medium volatile bituminous coal. The Argonne coals cover a range or rank from lignite to low volatile bituminous coal and were used to determine the effect of rank in laboratory studies. The methane content of six selected Utah coal seams and the Colorado coal seam was measured in situ using a special sample collection device and a bubble desorbometer. Coal samples were collected at each measurement site for laboratory analysis. The cleat and joint system was evaluated for the coal and surrounding rocks and geological conditions were noted. Permeability measurements were performed on selected samples and all samples were analyzed for proximate and ultimate analysis, petrographic analysis, {sup 13}C NMR dipolar-dephasing spectroscopy, and density analysis. The observed methane adsorption behavior was correlated with the chemical structure and physical properties of the coals.

  7. September 2012, Work Force Retention Work Group Status Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Work Force Retention Work Group Status Overview 2 Subgroups: Pro-Force and Non-Pro-Force Pro-Force Subgroup: Accomplishments: 1. Completion of 10 CFR 1046 Protective Force ...

  8. Recommendation 204: Unique assest retention | Department of Energy

    Office of Environmental Management (EM)

    4: Unique assest retention Recommendation 204: Unique assest retention We recommend that DOE identify these unique assets. Further, we recommend that DOE and stakeholders (e.g. local communities, tribal governments, and the public) review these unique assets for their potential future use before they are gone forever. Recommendation 204 (51.22 KB) DOE response to recommendation 204 (30 KB) More Documents & Publications EM SSAB Recommendations and Letters - 2011-01 EM SSAB Recommendations and

  9. Immobilization of azurin with retention of its native electrochemical

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    properties at alkylsilane self-assembled monolayer modified indium tin oxide Immobilization of azurin with retention of its native electrochemical properties at alkylsilane self-assembled monolayer modified indium tin oxide Authors: Ashur, I. and Jones, A. K. Title: Immobilization of azurin with retention of its native electrochemical properties at alkylsilane self-assembled monolayer modified indium tin oxide Source: Electrochimica Acta Year: 2012 Volume: 85 Pages: 169-174 ABSTRACT: Indium

  10. Pilot-Scale Benzene Retention and Release Demonstration

    SciTech Connect (OSTI)

    Marek, J.C.

    2003-11-10

    During the initial months of In-Tank Precipitation radioactive operation in 1995 the process experienced high rates of tetraphenylborate decomposition with assumed corresponding high rates of benzene generation. In March 1996 after a two month quiescent period, a water addition to Tank 48H resulted in an unexpected benzene release to the tank vapor phase. This was the first time a low energy input resulted in a significant release rate. This led to questions about how benzene, generated in-situ by TPB decomposition, was retained in the surrounding potassium tetraphenylborate slurry. It was postulated the retention mechanism may have changed during the quiescent period prior to March so the benzene present became readily releasable to the vapor phase with low energy input to the slurry or that enough benzene accumulated that some of it was in a different, more releasable form. Readily releasable is a qualitative term defined as a rapid release of benzene at a rate approaching evaporation of a free benzene layer. It is intended to distinguish between benzene in a form with high liquid phase resistance to mass transfer diffusion controlled from benzene in a form with minimal liquid phase resistance to mass transfer free benzene layer evaporation. If a readily releasable form of benzene was present, the vapor space profile during release tests was anticipated to have an initial benzene vapor space concentration peak followed by a lower vapor concentration, longer duration release.

  11. Liquid Effluent Retention Facility (LERF) Final Hazard Category Determination

    SciTech Connect (OSTI)

    HUTH, L.L.

    2001-06-06

    The Liquid Effluent Retention Facility was designed to store 242-A Evaporator process condensate and other liquid waste streams for treatment at the 200 East Area Effluent Treatment Facility. The Liquid Effluent Retention Facility has been previously classified as a Category 3 Nonreactor Nuclear Facility. As defined in Hazard Categorization and Accident Analysis Techniques for Compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports (DOE 1992, DOE 1997), Category 3 Nuclear Facilities have the potential for significant localized (radiological) consequences. However, based on current facility design, operations, and radioactive constituent concentrations, the Liquid Effluent Retention Facility does not have the potential for significant localized (radiological) consequences and is categorized as a Radiological Facility. This report documents the final hazard categorization process performed in accordance with DOE Order 5480.23, Nuclear Safety Analysis Reports. This report describes the current configuration and operations of the Liquid Effluent Retention Facility. Also included is a preliminary hazard categorization, which is based on current and proposed radioactive and hazardous material inventories, a preliminary hazards and accident analysis, and a final hazard category determination. The results of the hazards and accident analysis, based on the current configuration and operations of the Liquid Effluent Retention Facility and the current and proposed radioactive and hazardous material inventories, demonstrate that the Liquid Effluent Retention Facility does not have the potential for significant localized (radiological) consequences. Based on the final hazard category analysis, the Liquid Effluent Retention Facility is a Radiological Facility. The final hazard category determination is based on a comparative evaluation of the consequence basis for the Category 3 threshold quantities to the calculated consequences for credible releases The basis for

  12. REACTOR VIEWING APPARATUS

    DOE Patents [OSTI]

    Monk, G.S.

    1959-01-13

    An optical system is presented that is suitable for viewing objects in a region of relatively high radioactivity, or high neutron activity, such as a neutronic reactor. This optical system will absorb neutrons and gamma rays thereby protecting personnel fronm the harmful biological effects of such penetrating radiations. The optical system is comprised of a viewing tube having a lens at one end, a transparent solid member at the other end and a transparent aqueous liquid completely filling the tube between the ends. The lens is made of a polymerized organic material and the transparent solid member is made of a radiation absorbent material. A shield surrounds the tube betwcen the flanges and is made of a gamma ray absorbing material.

  13. Stereoscopic optical viewing system

    DOE Patents [OSTI]

    Tallman, C.S.

    1986-05-02

    An improved optical system which provides the operator with a stereoscopic viewing field and depth of vision, particularly suitable for use in various machines such as electron or laser beam welding and drilling machines. The system features two separate but independently controlled optical viewing assemblies from the eyepiece to a spot directly above the working surface. Each optical assembly comprises a combination of eye pieces, turning prisms, telephoto lenses for providing magnification, achromatic imaging relay lenses and final stage pentagonal turning prisms. Adjustment for variations in distance from the turning prisms to the workpiece, necessitated by varying part sizes and configurations and by the operator's visual accuity, is provided separately for each optical assembly by means of separate manual controls at the operator console or within easy reach of the operator.

  14. Stereoscopic optical viewing system

    DOE Patents [OSTI]

    Tallman, Clifford S.

    1987-01-01

    An improved optical system which provides the operator a stereoscopic viewing field and depth of vision, particularly suitable for use in various machines such as electron or laser beam welding and drilling machines. The system features two separate but independently controlled optical viewing assemblies from the eyepiece to a spot directly above the working surface. Each optical assembly comprises a combination of eye pieces, turning prisms, telephoto lenses for providing magnification, achromatic imaging relay lenses and final stage pentagonal turning prisms. Adjustment for variations in distance from the turning prisms to the workpiece, necessitated by varying part sizes and configurations and by the operator's visual accuity, is provided separately for each optical assembly by means of separate manual controls at the operator console or within easy reach of the operator.

  15. Retention of elemental mercury in fly ashes in different atmospheres

    SciTech Connect (OSTI)

    M.A. Lopez-Anton; M. Diaz-Somoano; M.R. Martinez-Tarazona

    2007-01-15

    Mercury is an extremely volatile element, which is emitted from coal combustion to the environment mostly in the vapor phase. To avoid the environmental problems that the toxic species of this element may cause, control technologies for the removal of mercury are necessary. Recent research has shown that certain fly ash materials have an affinity for mercury. Moreover, it has been observed that fly ashes may catalyze the oxidation of elemental mercury and facilitate its capture. However, the exact nature of Hg-fly ash interactions is still unknown, and mercury oxidation through fly ash needs to be investigated more thoroughly. In this work, the influence of a gas atmosphere on the retention of elemental mercury on fly ashes of different characteristics was evaluated. The retention capacity was estimated comparatively in inert and two gas atmospheres containing species present in coal gasification and coal combustion. Fly ashes produced in two pulverized coal combustion (PCC) plants, produced from coals of different rank (CTA and CTSR), and a fly ash (CTP) produced in a fluidized bed combustion (FBC) plant were used as raw materials. The mercury retention capacity of these fly ashes was compared to the retention obtained in different activated carbons. Although the capture of mercury is very similar in the gasification atmosphere and N{sub 2}, it is much more efficient in a coal combustion retention, being greater in fly ashes from PCC than those from FBC plants. 22 refs., 6 figs., 3 tabs.

  16. Portable conduit retention apparatus for releasably retaining a conduit therein

    DOE Patents [OSTI]

    Metzger, Richard H.

    1998-01-01

    Portable conduit retention apparatus for releasably retaining a conduit therein. The apparatus releasably retains the conduit out of the way of nearby personnel and equipment. The apparatus includes a portable support frame defining a slot therein having an open mouth portion in communication with the slot for receiving the conduit through the open mouth portion and into the slot. A retention bar is pivotally connected to the support frame adjacent the mouth portion for releasably retaining the conduit in the slot. The retention bar freely pivots to a first position, so that the mouth portion is unblocked in order that the conduit is received through the mouth portion and into the slot. In addition, the retention bar freely pivots to a second position, so that the mouth portion is blocked in order that the conduit is retained in the slot. The conduit is released from the slot by pivoting the retention bar to the first position to unblock the mouth portion and thereafter manipulating the conduit from the slot and through the mouth portion. The apparatus may further include a mounting member attached to the support frame for mounting the apparatus on a vertical support surface. Another embodiment of the apparatus includes a shoe assembly of predetermined weight removably connected to the support frame for resting the apparatus on a floor in such a manner that the apparatus is substantially stationary on the floor.

  17. Portable conduit retention apparatus for releasably retaining a conduit therein

    DOE Patents [OSTI]

    Metzger, R.H.

    1998-07-07

    Portable conduit retention apparatus is described for releasably retaining a conduit therein. The apparatus releasably retains the conduit out of the way of nearby personnel and equipment. The apparatus includes a portable support frame defining a slot therein having an open mouth portion in communication with the slot for receiving the conduit through the open mouth portion and into the slot. A retention bar is pivotally connected to the support frame adjacent the mouth portion for releasably retaining the conduit in the slot. The retention bar freely pivots to a first position, so that the mouth portion is unblocked in order that the conduit is received through the mouth portion and into the slot. In addition, the retention bar freely pivots to a second position, so that the mouth portion is blocked in order that the conduit is retained in the slot. The conduit is released from the slot by pivoting the retention bar to the first position to unblock the mouth portion and thereafter manipulating the conduit from the slot and through the mouth portion. The apparatus may further include a mounting member attached to the support frame for mounting the apparatus on a vertical support surface. Another embodiment of the apparatus includes a shoe assembly of predetermined weight removably connected to the support frame for resting the apparatus on a floor in such a manner that the apparatus is substantially stationary on the floor. 6 figs.

  18. Revised Guidance for Recruitment, Retention and Relocation Incentives |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Revised Guidance for Recruitment, Retention and Relocation Incentives Revised Guidance for Recruitment, Retention and Relocation Incentives 3Rs Revised Guidance.pdf (66.78 KB) CHCO Memo_3Rs Guidance_Attachment_05-12-2016_FINAL.pdf (181.71 KB) Responsible Contacts Tiffany Wheeler Human Resources Specialist E-mail tiffany.wheeler@hq.doe.gov Phone (202) 586-8481 More Documents & Publications Manager's Desk Reference on Human Capital Management Flexibilities DOE Handbook

  19. The BetterBuildings View

    Broader source: Energy.gov [DOE]

    The BetterBuildings View Newsletter, April 2011, from the U.S. Department of Energy's Better Buildings Neighborhood Program.

  20. Factors affecting the retention of methyl iodide by iodide-impregnated carbon

    SciTech Connect (OSTI)

    Hyder, M.L.; Malstrom, R.A.

    1990-12-31

    Iodide-impregnated activated carbon that had been in use for up to 30 months was studied to characterize those factors that affect its interaction with and retention of methyl iodide. Humidity and competing organic sorbents were observed to decrease the residence time of the methyl iodide on the carbon bed. Additionally, changes in the effective surface area and the loss of iodide from the surface are both important in determining the effectiveness of the carbon for retaining radioactive iodine from methyl iodide. A simple model incorporating both factors gave a fairly good fit to the experimental data.

  1. Factors affecting the retention of methyl iodide by iodide-impregnated carbon

    SciTech Connect (OSTI)

    Hyder, M.L.; Malstrom, R.A.

    1990-01-01

    Iodide-impregnated activated carbon that had been in use for up to 30 months was studied to characterize those factors that affect its interaction with and retention of methyl iodide. Humidity and competing organic sorbents were observed to decrease the residence time of the methyl iodide on the carbon bed. Additionally, changes in the effective surface area and the loss of iodide from the surface are both important in determining the effectiveness of the carbon for retaining radioactive iodine from methyl iodide. A simple model incorporating both factors gave a fairly good fit to the experimental data.

  2. Our view: Vaccinate now, prevent flu later

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Our view: Vaccinate now, prevent flu later Our view: Vaccinate now, prevent flu later Los Alamos National Laboratory scientists are predicting that this winter's flu season is most likely to peak in February across much of the United States. The scientists can say this because of the model they have constructed. December 24, 2015 Man sneezing Model suggests still time to get your flu shot and be protected. "There's no crystal ball when it comes to predicting disease outbreaks," said

  3. Protective laser beam viewing device

    DOE Patents [OSTI]

    Neil, George R.; Jordan, Kevin Carl

    2012-12-18

    A protective laser beam viewing system or device including a camera selectively sensitive to laser light wavelengths and a viewing screen receiving images from the laser sensitive camera. According to a preferred embodiment of the invention, the camera is worn on the head of the user or incorporated into a goggle-type viewing display so that it is always aimed at the area of viewing interest to the user and the viewing screen is incorporated into a video display worn as goggles over the eyes of the user.

  4. Fission gas retention and axial expansion of irradiated metallic fuel

    SciTech Connect (OSTI)

    Fenske, G.R.; Emerson, J.E.; Savoie, F.E.; Johanson, E.W.

    1986-05-01

    Out-of-reactor experiments utilizing direct electrical heating and infrared heating techniques were performed on irradiated metallic fuel. The results indicate accelerated expansion can occur during thermal transients and that the accelerated expansion is driven by retained fission gases. The results also demonstrate gas retention and, hence, expansion behavior is a function of axial position within the pin.

  5. False color viewing device

    DOE Patents [OSTI]

    Kronberg, J.W.

    1991-05-08

    This invention consists of a viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching, the user`s eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage.

  6. False color viewing device

    DOE Patents [OSTI]

    Kronberg, James W.

    1992-01-01

    A viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching the user's eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage.

  7. False color viewing device

    DOE Patents [OSTI]

    Kronberg, J.W.

    1992-10-20

    A viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching the user's eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage. 7 figs.

  8. The view from Kiev

    SciTech Connect (OSTI)

    Kiselyov, S.

    1993-11-01

    This article reports the observations of correspondents for the Bulletin (two Russian journalists, one based in Moscow, the other in Kiev) who investigated the status of the Soviet Union's Black Sea Fleet and Ukraine's status as a non-nuclear-weapons state. After two years of wrangling and two earlier failed settlements, Russian President Boris Yeltsin met with Ukrainian President Leonid Kravchuk at Massandra in Crimea. On September 3, the leaders announced that Russia would buy out Ukraine's interest in the fleet and lease the port at Sevastopol. The Massandra summit was also supposed to settle Ukraine's status as a non-nuclear-weapons state. Described here are the Kiev-based correspondent's views on the Massandra summit (and its major topics), which was to have been called off by the Russian foreign ministry when Ukrainian Prime Minister Leonid Kuchma resigned.

  9. Mountain View Grand | Open Energy Information

    Open Energy Info (EERE)

    Mountain View Grand Jump to: navigation, search Name Mountain View Grand Facility Mountain View Grand Sector Wind energy Facility Type Small Scale Wind Facility Status In Service...

  10. Fermilab | Tritium at Fermilab | Ferry Creek Aerial View

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ferry Creek Aerial View Ferry Creek Aerial View

  11. Fermilab | Tritium at Fermilab | Kress Creek Aerial View

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Kress Creek Aerial View Kress Creek Aerial View

  12. In-vessel tritium retention and removal in ITER

    SciTech Connect (OSTI)

    Federici, G.; Anderl, R.A.; Andrew, P.

    1998-06-01

    The International Thermonuclear Experimental Reactor (ITER) is envisioned to be the next major step in the world`s fusion program from the present generation of tokamaks and is designed to study fusion plasmas with a reactor relevant range of plasma parameters. During normal operation, it is expected that a fraction of the unburned tritium, that is used to routinely fuel the discharge, will be retained together with deuterium on the surfaces and in the bulk of the plasma facing materials (PFMs) surrounding the core and divertor plasma. The understanding of he basic retention mechanisms (physical and chemical) involved and their dependence upon plasma parameters and other relevant operation conditions is necessary for the accurate prediction of the amount of tritium retained at any given time in the ITER torus. Accurate estimates are essential to assess the radiological hazards associated with routine operation and with potential accident scenarios which may lead to mobilization of tritium that is not tenaciously held. Estimates are needed to establish the detritiation requirements for coolant water, to determine the plasma fueling and tritium supply requirements, and to establish the needed frequency and the procedures for tritium recovery and clean-up. The organization of this paper is as follows. Section 2 provides an overview of the design and operating conditions of the main components which define the plasma boundary of ITER. Section 3 reviews the erosion database and the results of recent relevant experiments conducted both in laboratory facilities and in tokamaks. These data provide the experimental basis and serve as an important benchmark for both model development (discussed in Section 4) and calculations (discussed in Section 5) that are required to predict tritium inventory build-up in ITER. Section 6 emphasizes the need to develop and test methods to remove the tritium from the codeposited C-based films and reviews the status and the prospects of the

  13. Highland View school | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Highland View school Highland View school Aerial showing Highland View school and surrounding homes

  14. Account Sponsorship & Retention Policy | Argonne Leadership Computing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Facility Allocations Mira/Cetus/Vesta Cooley Policies Accounts Policy Account Sponsorship & Retention Policy ALCC Quarterly Report Policy ALCF Acknowledgment Policy Data Policy INCITE Quarterly Report Policy Job Scheduling Policy on BG/Q Job Scheduling Policies on Cooley Pullback Policy Refund Policy Software Policy User Authentication Policy Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback

  15. Liquid Effluent Retention Facility/Effluent Treatment Facility Hazards Assessment

    SciTech Connect (OSTI)

    Simiele, G.A.

    1994-09-29

    This document establishes the technical basis in support of Emergency Planning activities for the Liquid Effluent Retention Facility and Effluent Treatment Facility the Hanford Site. The document represents an acceptable interpretation of the implementing guidance document for DOE ORDER 5500.3A. Through this document, the technical basis for the development of facility specific Emergency Action Levels and the Emergency Planning Zone is demonstrated.

  16. Radiation View Factor With Shadowing

    Energy Science and Technology Software Center (OSTI)

    1992-02-24

    FACET calculates the radiation geometric view factor (alternatively called shape factor, angle factor, or configuration factor) between surfaces for axisymmetric, two-dimensional planar and three-dimensional geometries with interposed third surface obstructions. FACET was developed to calculate view factors as input data to finite element heat transfer analysis codes.

  17. National Instruments Offers Real-Time Course on April 12 | Jefferson...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Instruments Offers Real-Time Linux, LabVIEW Real-Time and LabView FPGA Course at JLab on April 12 For those already using LabView and wanting to learn about embedded ...

  18. EISPC White Paper on “State Approaches to Retention of Nuclear Power Plants” Now Available

    Broader source: Energy.gov [DOE]

    The Eastern Interconnection States’ Planning Collaborative (EISPC) has released a white paper on “State Approaches to Retention of Nuclear Power Plants” that examines operational, economic, and...

  19. Nuclear reactor melt-retention structure to mitigate direct containment heating

    DOE Patents [OSTI]

    Tutu, Narinder K.; Ginsberg, Theodore; Klages, John R.

    1991-01-01

    A light water nuclear reactor melt-retention structure to mitigate the extent of direct containment heating of the reactor containment building. The structure includes a retention chamber for retaining molten core material away from the upper regions of the reactor containment building when a severe accident causes the bottom of the pressure vessel of the reactor to fail and discharge such molten material under high pressure through the reactor cavity into the retention chamber. In combination with the melt-retention chamber there is provided a passageway that includes molten core droplet deflector vanes and has gas vent means in its upper surface, which means are operable to deflect molten core droplets into the retention chamber while allowing high pressure steam and gases to be vented into the upper regions of the containment building. A plurality of platforms are mounted within the passageway and the melt-retention structure to direct the flow of molten core material and help retain it within the melt-retention chamber. In addition, ribs are mounted at spaced positions on the floor of the melt-retention chamber, and grid means are positioned at the entrance side of the retention chamber. The grid means develop gas back pressure that helps separate the molten core droplets from discharged high pressure steam and gases, thereby forcing the steam and gases to vent into the upper regions of the reactor containment building.

  20. Wide field of view telescope

    DOE Patents [OSTI]

    Ackermann, Mark R.; McGraw, John T.; Zimmer, Peter C.

    2008-01-15

    A wide field of view telescope having two concave and two convex reflective surfaces, each with an aspheric surface contour, has a flat focal plane array. Each of the primary, secondary, tertiary, and quaternary reflective surfaces are rotationally symmetric about the optical axis. The combination of the reflective surfaces results in a wide field of view in the range of approximately 3.8.degree. to approximately 6.5.degree.. The length of the telescope along the optical axis is approximately equal to or less than the diameter of the largest of the reflective surfaces.

  1. Development of Tc(IV)-Incorporated Fe Minerals to Enhance 99Tc Retention in Glass Waste Form

    SciTech Connect (OSTI)

    Um, Wooyong; Luksic, Steven A.; Wang, Guohui; Kim, Dong-Sang; Schweiger, Michael J.; Hrma, Pavel R.; Kruger, Albert A.

    2015-03-17

    Iron minerals have been considered to be good hosts for Tc immobilization because the Tc(IV) ion substitutes for Fe(III) in the crystal structure of the Fe oxide due to similarities in (1) cation size [Tc(IV) = 78.5 pm ; Fe(III) = 69 or 78.5 pm], (2) metal-oxygen interatomic distance (Tc—O = 0.199 nm, Fe—O = 0.203 nm), (3) number of coordinating oxygen atoms (both 6-fold coordinated), and (4) the redox potential (Eh=ca. +20 mV at pH = 7) for a redox couple between Tc(VII)/Tc(IV) and Fe(III)/Fe(II). Magnetite, maghemite, and trevorite are iron oxide minerals and all belong to spinel mineral group. Laboratory testing shows that Tc can be removed from aqueous waste solutions by a process of Tc reduction from Tc(VII) to Tc(IV) followed by co-precipitation with iron oxide minerals during recrystallization of Fe(OH)2(s) used as an initial solid precursor. X-ray absorption near edge structure (XANES) spectroscopy confirmed that Tc was in the +4 oxidation state in final Tc-Fe minerals. The Tc-incorporated Fe minerals were also tested for Tc retention in glass melts at different temperatures between 600 – 1,000 oC in a furnace. After being cooled in air, the solid glass specimens collected at different temperatures were analyzed for Tc oxidation state using XANES and Tc retention using liquid scintillation counting (LSC). Even though Tc(IV) started to reoxidize at 600 oC, Tc retention in the final glass specimen prepared with Tc-incorporated Fe mineral even at high temperatures was at least two times higher than glass prepared with KTcO4 salt. Higher Tc retention in glass is considered to result from limited and delayed Tc volatilization process due to Fe mineral encapsulation for Tc. Therefore, the results showing the presence of Tc(IV) in the Fe mineral structure indicate strong possibility to enhance Tc retention in borosilicate glass as well as to reduce the remediation costs at the Hanford Site.

  2. RETENTION OF SULFATE IN HIGH LEVEL RADIOACTIVE WASTE GLASS

    SciTech Connect (OSTI)

    Fox, K.

    2010-09-07

    High level radioactive wastes are being vitrified at the Savannah River Site for long term disposal. Many of the wastes contain sulfate at concentrations that can be difficult to retain in borosilicate glass. This study involves efforts to optimize the composition of a glass frit for combination with the waste to improve sulfate retention while meeting other process and product performance constraints. The fabrication and characterization of several series of simulated waste glasses are described. The experiments are detailed chronologically, to provide insight into part of the engineering studies used in developing frit compositions for an operating high level waste vitrification facility. The results lead to the recommendation of a specific frit composition and a concentration limit for sulfate in the glass for the next batch of sludge to be processed at Savannah River.

  3. Assessment of gas accumulation and retention -- Tank 241-SY-101

    SciTech Connect (OSTI)

    Alleman, R.T.; Burke, T.M.; Reynolds, D.A.; Simpson, D.E.

    1993-03-01

    An approximate analysis has been carried out to assess and estimate the maximum quantity of gas that is likely to be accumulated within waste tank 241-SY-101, and the maximum quantity which is likely to be retained after gas release events (GRE). According to the phenomenological models used for this assessment, based on interpretation of current and recent operational data, the estimated gas generation rate in the tank is approximately 4 m{sup 3}/day (147 ft{sup 3}/day). About half of this gas is released as it is generated, which is (essentially) continuously. The remainder is accumulated within the slurry layer of settled solids at the bottom of the tank, and released episodically in GREs, known as ``burps,`` that are induced by unstable buoyant conditions which develop when sufficient gas accumulates in the slurry. Calculations based on gas volumes to cause neutral buoyancy in the slurry predict the following: the maximum gas accumulation (at 1 atm pressure) that can occur without triggering a GRE is in the range of 606 to 1,039 m{sup 3} (21,400 to 36,700 ft{sup 3}); and the maximum gas retention immediately after a GRE is equal to the maximum accumulation minus the gas released in the GRE. GREs do not necessarily involve all of the slurry. In the largest GREs, which are assumed to involve all of the slurry, the minimum gas release (at 1 atm pressure) is calculated to be in the range of 193 to 328 m{sup 3} (6,800 to 11,600 ft{sup 3}). The corresponding maximum gas retention would be 413 to 711 m{sup 3} (14,600 to 25,100 ft{sup 3}).

  4. Views of the solar system

    SciTech Connect (OSTI)

    Hamilton, C.

    1995-02-01

    Views of the Solar System has been created as an educational tour of the solar system. It contains images and information about the Sun, planets, moons, asteroids and comets found within the solar system. The image processing for many of the images was done by the author. This tour uses hypertext to allow space travel by simply clicking on a desired planet. This causes information and images about the planet to appear on screen. While on a planet page, hyperlinks travel to pages about the moons and other relevant available resources. Unusual terms are linked to and defined in the Glossary page. Statistical information of the planets and satellites can be browsed through lists sorted by name, radius and distance. History of Space Exploration contains information about rocket history, early astronauts, space missions, spacecraft and detailed chronology tables of space exploration. The Table of Contents page has links to all of the various pages within Views Of the Solar System.

  5. For current viewing resistor loads

    DOE Patents [OSTI]

    Lyons, Gregory R.; Hass, Jay B.

    2011-04-19

    The invention comprises a terminal unit for a flat cable comprising a BNC-PCB connector having a pin for electrically contacting one or more conducting elements of a flat cable, and a current viewing resistor having an opening through which the pin extends and having a resistor face that abuts a connector face of the BNC-PCB connector, wherein the device is a terminal unit for the flat cable.

  6. Formation and retention of methane in coal. Final report

    SciTech Connect (OSTI)

    Hucka, V.J.; Bodily, D.M.; Huang, H.

    1992-05-15

    The formation and retention of methane in coalbeds was studied for ten Utah coal samples, one Colorado coal sample and eight coal samples from the Argonne Premium Coal Sample Bank.Methane gas content of the Utah and Colorado coals varied from zero to 9 cm{sup 3}/g. The Utah coals were all high volatile bituminous coals. The Colorado coal was a gassy medium volatile bituminous coal. The Argonne coals cover a range or rank from lignite to low volatile bituminous coal and were used to determine the effect of rank in laboratory studies. The methane content of six selected Utah coal seams and the Colorado coal seam was measured in situ using a special sample collection device and a bubble desorbometer. Coal samples were collected at each measurement site for laboratory analysis. The cleat and joint system was evaluated for the coal and surrounding rocks and geological conditions were noted. Permeability measurements were performed on selected samples and all samples were analyzed for proximate and ultimate analysis, petrographic analysis, {sup 13}C NMR dipolar-dephasing spectroscopy, and density analysis. The observed methane adsorption behavior was correlated with the chemical structure and physical properties of the coals.

  7. LIQUID EFFLUENT RETENTION FACILITY (LERF) BASIN 42 STUDIES

    SciTech Connect (OSTI)

    DUNCAN JB

    2004-10-29

    This report documents laboratory results obtained under test plan RPP-21533 for samples submitted by the Effluent Treatment Facility (ETF) from the Liquid Effluent Retention Facility (LERF) Basin 42 (Reference 1). The LERF Basin 42 contains process condensate (PC) from the 242-A Evaporator and landfill leachate. The ETF processes one PC campaign approximately every 12 to 18 months. A typical PC campaign volume can range from 1.5 to 2.5 million gallons. During the September 2003 ETF Basin 42 processing campaign, a recurring problem with 'gelatinous buildup' on the outlet filters from 60A-TK-I (surge tank) was observed (Figure 1). This buildup appeared on the filters after the contents of the surge tank were adjusted to a pH of between 5 and 6 using sulfuric acid. Biological activity in the PC feed was suspected to be the cause of the gelatinous material. Due to this buildup, the filters (10 {micro}m CUNO) required daily change out to maintain process throughput.

  8. Transparent hydrogel with enhanced water retention capacity by introducing highly hydratable salt

    SciTech Connect (OSTI)

    Bai, Yuanyuan; Xiang, Feng; Wang, Hong E-mail: suo@seas.harvard.edu; Chen, Baohong; Zhou, Jinxiong; Suo, Zhigang E-mail: suo@seas.harvard.edu

    2014-10-13

    Polyacrylamide hydrogels containing salt as electrolyte have been used as highly stretchable transparent electrodes in flexible electronics, but those hydrogels are easy to dry out due to water evaporation. Targeted, we try to enhance water retention capacity of polyacrylamide hydrogel by introducing highly hydratable salts into the hydrogel. These hydrogels show enhanced water retention capacity in different level. Specially, polyacrylamide hydrogel containing high content of lithium chloride can retain over 70% of its initial water even in environment with relative humidity of only 10% RH. The excellent water retention capacities of these hydrogels will make more applications of hydrogels become possible.

  9. Better Buildings Network View | February 2015

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  10. Better Buildings Network View | September 2014

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  11. Better Buildings Network View | June 2014

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  12. Better Buildings Network View | May 2015

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  13. Better Buildings Network View | June 2015

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  14. Better Buildings Network View | October 2014

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  15. Better Buildings Network View | October 2015

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  16. The Better Buildings Neighborhood View-- July 2012

    Broader source: Energy.gov [DOE]

    The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program.

  17. Better Buildings Network View | January 2016

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  18. Better Buildings Network View | February 2016

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  19. Better Buildings Network View | January 2014

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  20. Better Buildings Network View | November 2015

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  1. The Better Buildings Neighborhood View-- May 2012

    Broader source: Energy.gov [DOE]

    The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program

  2. Better Buildings Network View | May 2014

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  3. View Shed - Version 1.0

    Energy Science and Technology Software Center (OSTI)

    2014-09-18

    The View Shed library is a collection of Umbra modules that are used to calculate areas of visual coverage (view sheds). It maps high and low visibility areas and calculates sensor (camera placement for maximum coverage and performance. This assertion includes a managed C++ wrapper code (ViewShedWrapper) to enable C# applications, such as OpShed, to incorporate this library.

  4. TARGET FABRICATION: A VIEW FROM THE USERS.

    SciTech Connect (OSTI)

    Kyrala, George A.; Balkey, Matthew M.; Batha, Steven H.; Barnes, Cris W.; Christensen, Cindy; Cobble, James; Fincke, James; Keiter, Paul; Lanier, Nicholas; Paisley, Dennis; Sorem, Michael S.; Swift, Damian; Workman, Jonathan

    2003-07-18

    Targets are used for a variety of purposes, but ultimately we use them to validate codes that help us predict and understand new phenomena or effects. The sophistication and complexity of High Energy Density Physics (HEDP) and Inertial Confinement Fusion (ICF) targets has increased in time to match the advances made in modeling complex phenomena. The targets have changed from simple hohlraums, spherical geometries, and planar foils, to 3-dimensional geometries that require precision in construction, alignment, and metrology. Furthermore, material properties, such as surface morphologies and volume texture, have significant impact on the behavior of the targets and must be measured and controlled. In the following we will discuss how experimental physicists view targets and the influence that target construction has on interpreting the experimental results. We review a representative sampling of targets fabricated at the Los Alamos National Laboratory that are used in different experiments in support of ICF and HEDP.

  5. Mercury retention by fly ashes from coal combustion: Influence of the unburned carbon content

    SciTech Connect (OSTI)

    Lopez-Anton, M.A.; Diaz-Somoano, M.; Martinez-Tarazona, M.R.

    2007-01-31

    The objective of this study was to evaluate the effect of unburned carbon particles present in fly ashes produced by coal combustion on mercury retention. To achieve this objective, the work was divided into two parts. The aim of the first part of the study was to estimate the amount of mercury captured by the fly ashes during combustion in power stations and the relationship of this retention to the unburned carbon content. The second part was a laboratory-scale study aimed at evaluating the retention of mercury concentrations greater than those produced in power stations by fly ashes of different characteristics and by unburned carbon particles. From the results obtained it can be inferred that the unburned carbon content is not the only variable that controls mercury capture in fly ashes. The textural characteristics of these unburned particles and of other components of fly ashes also influence retention.

  6. Variations in the Retention and Excretion of {sup 137}Cs with Age and Sex

    SciTech Connect (OSTI)

    Boni, A.L.

    2001-08-29

    This report discusses the effects of age and sex on the retention and excretion of {sup 137}Cs in the body in a cross section of the general population over a four-year period.

  7. The retention of iodine in stainless steel sample lines

    SciTech Connect (OSTI)

    Evans, G.J.; Deir, C.; Ball, J.M.

    1995-02-01

    Following an accident in a multi-unit CANDU nuclear generating station, decontamination of air vented from containment would play a critical role in minimizing the release of iodine to the environment. The concentration of gas phase iodine in containment air would be measured using the post accident radiation monitoring system, requiring that air samples be passed through a considerable length of tubing to a remote location where the desired measurements could safely be made. A significant loss of iodine, due to adsorption on the sample line surfaces, could greatly distort the measurement. In this study, the retention of I{sub 2}(g) on stainless steel was evaluated in bench scale experiments in order to evaluate, and if possible minimise, the extent of any such line losses. Experiments at the University of Toronto were performed using 6 inch lengths of 1/4 inch stainless steel tubing. Air, containing I-131 labelled I{sub 2}(g), ranging in concentration from 10{sup {minus}10} to 10{sup {minus}6} mol/dm{sup 3} and relative humidity (:RH) from 20 to 90 %, was passed through tubing samples maintained at temperatures ranging from 25 to 90{degrees}C. Adsorption at low gas phase iodine concentrations differed substantially from that at higher concentrations. The rate of deposition was proportional to the gas phase concentration, giving support to the concept of a first order deposition velocity. The surface loading increased with increasing relative humidity, particularly at low RH values, while the deposition rate decreased with increasing temperature. Surface water on the steel may play an important role in the deposition process. The chemisorbed iodine was located primarily in areas of corrosion. Furthermore, water used to wash the steel contained Fe, Mn and iodine in the form of iodide, suggesting that I{sub 2} reacted to form metal iodides. The deposition of I{sub 2} was also found to depend on the initial surface condition.

  8. Transport and Retention of Engineered Nanoporous Particles in Porous Media: Effects of Concentration and Flow Dynamics

    SciTech Connect (OSTI)

    Shang, Jianying; Liu, Chongxuan; Wang, Zheming

    2013-01-20

    Engineered nanoporous particles are an important class of nano-structured materials that can be functionalized in their internal surfaces for various applications including groundwater contaminant sequestration. This paper reported a study of transport and retention of engineered nanoporous silicate particles (ENSPs) that are designed for treatment and remediation of contaminants such as uranium in groundwater and sediments. The transport and retention of ENSPs were investigated under variable particle concentrations and dynamic flow conditions in a synthetic groundwater that mimics field groundwater chemical composition. The dynamic flow condition was achieved using a flow-interruption (stop-flow) approach with variable stop-flow durations to explore particle retention and release kinetics. The results showed that the ENSPs transport was strongly affected by the particle concentrations and dynamic flow conditions. A lower injected ENSPs concentration and longer stop-flow duration led to a more particle retention. The experimental data were used to evaluate the applicability of various kinetic models that were developed for colloidal particle retention and release in describing ENSPs transport. Model fits suggested that the transport and retention of ENSPs were subjected to a complex coupling of reversible attachment/detachment and straining/liberation processes. Both experimental and modeling results indicated that dynamic groundwater flow condition is an important parameter to be considered in exploring and modeling engineered particle transport in subsurface porous media.

  9. Narrow Field of View Zenith Radiometer (NFOV) Handbook

    SciTech Connect (OSTI)

    Chiu, C; Marshak, A; Hodges, G; Barnard, JC; Schmelzer, J

    2008-11-01

    The two-channel narrow field-of-view radiometer (NFOV2) is a ground-based radiometer that looks straight up and measures radiance directly above the instrument at wavelengths of 673 and 870 nm. The field-of-view of the instrument is 1.2 degrees, and the sampling time resolution is one second. Measurements of the NFOV2 have been used to retrieve optical properties for overhead clouds that range from patchy to overcast. With a one-second sampling rate of the NFOV2, faster than almost any other ARM Climate Research Facility (ACRF) instrument, we are able, for the first time, to capture changes in cloud optical properties at the natural time scale of cloud evolution.

  10. Prairie View Gas Recovery Biomass Facility | Open Energy Information

    Open Energy Info (EERE)

    View Gas Recovery Biomass Facility Jump to: navigation, search Name Prairie View Gas Recovery Biomass Facility Facility Prairie View Gas Recovery Sector Biomass Facility Type...

  11. The Better Buildings Neighborhood View - September 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BB Neighborhood View -- September 2012 (140.07 KB) More Documents & Publications The Better Buildings Neighborhood View -- Fall 2011 The Better Buildings Neighborhood View -- July ...

  12. High Performance Builder Spotlight: Clifton View Homes

    SciTech Connect (OSTI)

    2011-01-01

    Clifton View Homes’s remodel of a 1962 rambler, on Whidbey Island in Washington State, cut energy costs by two-thirds.

  13. Better Buildings Network View | April 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | April 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View April 2015 (155.77 KB) More Documents & Publications Better Buildings Network View | May 2015 Better Buildings Network View | March 2015 Better Buildings Network View | July-August

  14. Better Buildings Network View | April 2016 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Better Buildings Network View | April 2016 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View April 2016 (154.45 KB) More Documents & Publications Better Buildings Network View | May 2016 Better Buildings Network View | June 2016 Better Buildings Network View | January 2016

  15. Better Buildings Network View | February 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | February 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View February 2014 (173.15 KB) More Documents & Publications Better Buildings Network View | January 2014 Better Buildings Network View | May 2015 Better Buildings Network View | June 2015

  16. Better Buildings Network View | June 2016 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Better Buildings Network View | June 2016 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View June 2016 (235.96 KB) More Documents & Publications Better Buildings Network View | November 2015 Better Buildings Network View | April 2016 Better Buildings Network View | May 2016

  17. Better Buildings Network View | March 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | March 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View March 2014 (129.73 KB) More Documents & Publications Better Buildings Network View | June 2015 Better Buildings Network View | May 2015 Better Buildings Network View | April 2014

  18. Better Buildings Network View | March 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | March 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View March 2015 (264.47 KB) More Documents & Publications Better Buildings Network View | January 2015 Better Buildings Network View | December 2014 Better Buildings Network View | April 2015

  19. Better Buildings Network View | March 2016 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Better Buildings Network View | March 2016 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View March 2016 (211.92 KB) More Documents & Publications Better Buildings Network View | April 2016 Better Buildings Network View | May 2016 Better Buildings Network View | February 2016

  20. Better Buildings Network View | May 2016 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Better Buildings Network View | May 2016 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View May 2016 (196.19 KB) More Documents & Publications Better Buildings Network View | April 2016 Better Buildings Network View | June 2016 Better Buildings Network View | January 2016

  1. The Better Buildings Neighborhood View -- April 2012 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 The Better Buildings Neighborhood View -- April 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program. BB Neighborhood View -- April 2012 (136.63 KB) More Documents & Publications The Better Buildings Neighborhood View -- March 2012 The Better Buildings Neighborhood View - September 2012 The Better Buildings Neighborhood View -- July 2012

  2. The Better Buildings Neighborhood View -- April 2013 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 The Better Buildings Neighborhood View -- April 2013 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program - April 2013. BB Neighborhood View -- April 2013 (152.71 KB) More Documents & Publications The Better Buildings Neighborhood View -- July 2013 The Better Buildings Neighborhood View -- January 2013 The Better Buildings Neighborhood View -- December 2013

  3. The Better Buildings Neighborhood View -- Fall 2011 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fall 2011 The Better Buildings Neighborhood View -- Fall 2011 Better Buildings Neighborhood View, from the Better Buildings Neighborhood Program of the U.S. Department of Energy. BB Neighborhood View -- Fall 2011 (204.44 KB) More Documents & Publications The Better Buildings Neighborhood View -- July 2013 The Better Buildings Neighborhood View - October 2012 The Better Buildings Neighborhood View -- December 2013

  4. The Better Buildings Neighborhood View -- January 2012 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy 2 The Better Buildings Neighborhood View -- January 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program. BB Neighborhood View -- January 2012 (214.32 KB) More Documents & Publications The Better Buildings Neighborhood View -- March 2012 The Better Buildings Neighborhood View -- February 2012 The BetterBuildings View

  5. The Better Buildings Neighborhood View -- July 2013 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 The Better Buildings Neighborhood View -- July 2013 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program - July 2013. BB Neighborhood View -- July 2013 (187 KB) More Documents & Publications The Better Buildings Neighborhood View -- Fall 2011 The Better Buildings Neighborhood View - October 2012 The Better Buildings Neighborhood View -- December 2013

  6. The Better Buildings Neighborhood View -- June 2012 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    June 2012 The Better Buildings Neighborhood View -- June 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program. BB Neighborhood View -- June 2012 (150.31 KB) More Documents & Publications The Better Buildings Neighborhood View -- August 2012 The Better Buildings Neighborhood View - October 2012 The Better Buildings Neighborhood View -- April 2012

  7. View from the Bridge | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    View from the Bridge View from the Bridge This presentation gives an overview of Caterpillar's R&D focus on advanced diesel engines and exhaust aftertreatment. deer08_utley.pdf (1.36 MB) More Documents & Publications Efficiency Improvement Pathway Development of Advanced Combustion Technologies for Increased Thermal Efficiency Energy & Sustainablility Partnerships

  8. Retention system and method for the blades of a rotary machine

    DOE Patents [OSTI]

    Pedersen, Poul D.; Glynn, Christopher C.; Walker, Roger C.

    2002-01-01

    A retention system and method for the blades of a rotary machine for preventing forward or aft axial movement of the rotor blades includes a circumferential hub slot formed about a circumference of the machine hub. The rotor blades have machined therein a blade retention slot which is aligned with the circumferential hub slot when the blades are received in correspondingly shaped openings in the hub. At least one ring segment is secured in the blade retention slots and the circumferential hub slot to retain the blades from axial movement. A key assembly is used to secure the ring segments in the aligned slots via a hook portion receiving the ring segments and a threaded portion that is driven radially outwardly by a nut. A cap may be provided to provide a redundant back-up load path for the centrifugal loads on the key. Alternatively, the key assembly may be formed in the blade dovetail.

  9. Prediction of retention and identification of non-substituted polyaromatic hydrocarbons by liquid chromatography

    SciTech Connect (OSTI)

    Lanin, S.N.; Nikitin, Yu.S.

    1988-03-10

    Elucidation of the correlation between the structures of investigated compounds and their retention parameters in liquid chromatography allows one to predict their behavior in the chromatographic system and to choose optimal conditions of resolution, which is the main task. The important and complex problem remains analysis of waste water. Polycyclic aromatic hydrocarbons are among the most widespread and toxic pollutants of industrial waste and natural waters. Many of them are carcinogens. A correlation equation, universal for a certain class of substances, is proposed to describe the retention and separation of polyaromatic hydrocarbons by reversed phase liquid chromatography. The possibility was shown of its application to prediction of retention data for test substances and for their identification.

  10. Improved information analysis - views and actions

    SciTech Connect (OSTI)

    Sheely, K.B.; Manatt, D.R.

    1995-07-01

    The IAEA continues to assess, develop, and test recommendations for strengthening the cost effectiveness of safeguards. The IAEA`s investigation has focused on ways to increase Agency access to data, including access to sites and site data, export/import data, environmental data, open-source data, and other expanded data sources. Although the acquisition of this raw data is essential to strengthening safeguards, the effectiveness of the system is going to be judged by what the Agency does with the data once they have acquired it. Therefore, the IAEA must have the capability to organize, analyze and present the data in a timely manner for internal management evaluation and external dissemination. The United States Department of Energy has established a Safeguards Information Management Systems (SIMS) Initiative to provide support and equipment which will improve the IAEA`s capability to utilize this expanded data to analyze State`s nuclear activities. This paper will present views on steps to improve information analysis and discuss the status of actions undertaken by the SIMS initiative.

  11. Soft Landing of Mass-Selected Gold Clusters: Influence of Ion and Ligand on Charge Retention and Reactivity

    SciTech Connect (OSTI)

    Johnson, Grant E.; Laskin, Julia

    2015-02-01

    Herein, we employ a combination of reduction synthesis in solution, soft landing of mass-selected precursor and product ions, and in situ time-of-flight secondary ion mass spectrometry (TOF-SIMS) to examine the influence of ion and the length of diphosphine ligands on the charge retention and reactivity of ligated gold clusters deposited onto self-assembled monolayer surfaces (SAMs). Product ions (Au10L42+, (10,4)2+, L = 1,3-bis(diphenyl-phosphino)propane, DPPP) were prepared through in-source collision induced dissociation (CID) and precursor ions [(8,4)2+, L = 1,6-bis(diphenylphosphino)hexane, DPPH] were synthesized in solution for comparison to (11,5)3+ precursor ions ligated with DPPP investigated previously (ACS Nano 2012, 6, 573 and J. Phys. Chem. C. 2012, 116, 24977). Similar to (11,5)3+ precursor ions, the (10,4)2+ product ions are shown to retain charge on 1H,1H,2H,2H-perfluorodecanethiol monolayers (FSAMs). Additional abundant peaks at higher m/z indicative of reactivity are observed in the TOF-SIMS spectrum of (10,4)2+ product ions that are not seen for (11,5)3+ precursor ions. The abundance of (10,4)2+ on 16-mercaptohexadecanoic acid (COOH-SAMs) is demonstrated to be lower than on FSAMs, consistent with partial reduction of charge. The (10,4)2+ product ion on 1-dodecanethiol (HSAMs) exhibits peaks similar to those seen on the COOH-SAM. On the HSAM, higher m/z peaks indicative of reactivity are observed similar to those on the FSAM. The (8,4)2+ DPPH precursor ions are shown to retain charge on FSAMs similar to (11,5)3+ precursor ions prepared with DPPP. An additional peak corresponding to attachment of one gold atom to (8,4)2+ is observed at higher m/z for DPPH-ligated clusters. On the COOH-SAM, (8,4)2+ is less abundant than on the FSAM consistent with partial neutralization. The results indicate that although retention of charge by product ions generated by CID is similar to precursor ions their reactivity during analysis with SIMS is different

  12. Competing retention pathways of uranium upon reaction with Fe(II)

    SciTech Connect (OSTI)

    Massey, Michael S.; Lezama Pacheco, Juan S.; Jones, Morris; Ilton, Eugene S.; Cerrato, Jose M.; Bargar, John R.; Fendorf, Scott

    2014-10-01

    Biogeochemical retention processes, including adsorption, reductive precipitation, and incorporation into host minerals, are important in contaminant transport, remediation, and geologic deposition of uranium. Recent work has shown that U can become incorporated into iron (hydr)oxide minerals, with a key pathway arising from Fe(II)-induced transformation of ferrihydrite, (Fe(OH)3nH2O) to goethite (?-FeO(OH)); this is a possible U retention mechanism in soils and sediments. Several key questions, however, remain unanswered regarding U incorporation into iron (hydr)oxides and this pathways contribution to U retention, including: (i) the competitiveness of U incorporation versus reduction to U(IV) and subsequent precipitation of UO2; (ii) the oxidation state of incorporated U; (iii) the effects of uranyl aqueous speciation on U incorporation; and, (iv) the mechanism of U incorporation. Here we use a series of batch reactions conducted at pH ~7, [U(VI)] from 1 to 170 ?M, [Fe(II)] from 0 to 3 mM, and [Ca] at 0 or 4 mM) coupled with spectroscopic examination of reaction products of Fe(II)-induced ferrihydrite transformation to address these outstanding questions. Uranium retention pathways were identified and quantified using extended x-ray absorption fine structure (EXAFS) spectroscopy, x-ray powder diffraction, x-ray photoelectron spectroscopy, and transmission electron microscopy. Analysis of EXAFS spectra showed that 14 to 89% of total U was incorporated into goethite, upon reaction with Fe(II) and ferrihydrite. Uranium incorporation was a particularly dominant retention pathway at U concentrations ? 50 ?M when either uranyl-carbonato or calcium-uranyl-carbonato complexes were dominant, accounting for 64 to 89% of total U. With increasing U(VI) and Fe(II) concentrations, U(VI) reduction to U(IV) became more prevalent, but U incorporation remained a functioning retention pathway. These findings highlight the potential importance of U(V) incorporation within iron

  13. TIME CALIBRATED OSCILLOSCOPE SWEEP

    DOE Patents [OSTI]

    Owren, H.M.; Johnson, B.M.; Smith, V.L.

    1958-04-22

    The time calibrator of an electric signal displayed on an oscilloscope is described. In contrast to the conventional technique of using time-calibrated divisions on the face of the oscilloscope, this invention provides means for directly superimposing equal time spaced markers upon a signal displayed upon an oscilloscope. More explicitly, the present invention includes generally a generator for developing a linear saw-tooth voltage and a circuit for combining a high-frequency sinusoidal voltage of a suitable amplitude and frequency with the saw-tooth voltage to produce a resultant sweep deflection voltage having a wave shape which is substantially linear with respect to time between equal time spaced incremental plateau regions occurring once each cycle of the sinusoidal voltage. The foregoing sweep voltage when applied to the horizontal deflection plates in combination with a signal to be observed applied to the vertical deflection plates of a cathode ray oscilloscope produces an image on the viewing screen which is essentially a display of the signal to be observed with respect to time. Intensified spots, or certain other conspicuous indications corresponding to the equal time spaced plateau regions of said sweep voltage, appear superimposed upon said displayed signal, which indications are therefore suitable for direct time calibration purposes.

  14. SPECIAL DATE AND TIME

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SPECIAL DATE AND TIME Evolving views of the outer solar system: new insights from NASA's New Horizons mission's historic first Pluto fly-by Dr. Kimberly Ennico Smith NASA Ames Research Center, Astrophysics Branch April 11, 2016 2:00 p.m. - Wilson Hall, One West On July 14, 2015, after a 9.5 year trek across the solar system, NASA's New Horizons spacecraft successfully flew by Pluto and its system of moons, taking imagery, spectra and in-situ particle data. In this internet- information age, this

  15. Pulmonary instillation of low doses of titanium dioxide nanoparticles in mice leads to particle retention and gene expression changes in the absence of inflammation

    SciTech Connect (OSTI)

    Husain, Mainul; Saber, Anne T.; Guo, Charles; Jacobsen, Nicklas R.; Jensen, Keld A.; Yauk, Carole L.; Williams, Andrew; Vogel, Ulla; Wallin, Hakan; Halappanavar, Sabina

    2013-06-15

    We investigated gene expression, protein synthesis, and particle retention in mouse lungs following intratracheal instillation of varying doses of nano-sized titanium dioxide (nano-TiO{sub 2}). Female C57BL/6 mice were exposed to rutile nano-TiO{sub 2} via single intratracheal instillations of 18, 54, and 162 μg/mouse. Mice were sampled 1, 3, and 28 days post-exposure. The deposition of nano-TiO{sub 2} in the lungs was assessed using nanoscale hyperspectral microscopy. Biological responses in the pulmonary system were analyzed using DNA microarrays, pathway-specific real-time RT-PCR (qPCR), gene-specific qPCR arrays, and tissue protein ELISA. Hyperspectral mapping showed dose-dependent retention of nano-TiO{sub 2} in the lungs up to 28 days post-instillation. DNA microarray analysis revealed approximately 3000 genes that were altered across all treatment groups (± 1.3 fold; p < 0.1). Several inflammatory mediators changed in a dose- and time-dependent manner at both the mRNA and protein level. Although no influx of neutrophils was detected at the low dose, changes in the expression of several genes and proteins associated with inflammation were observed. Resolving inflammation at the medium dose, and lack of neutrophil influx in the lung fluid at the low dose, were associated with down-regulation of genes involved in ion homeostasis and muscle regulation. Our gene expression results imply that retention of nano-TiO{sub 2} in the absence of inflammation over time may potentially perturb calcium and ion homeostasis, and affect smooth muscle activities. - Highlights: • Pulmonary effects following exposure to low doses of nano-TiO{sub 2} were examined. • Particle retention in lungs was assessed using nanoscale hyperspectral microscopy. • Particles persisted up to 28 days in lungs in all dose groups. • Inflammation was the pathway affected in the high dose group at all time points. • Ion homeostasis and muscle activity pathways were affected in the low dose

  16. The Better Buildings Neighborhood View - October 2012 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy The Better Buildings Neighborhood View - October 2012 The Better Buildings Neighborhood View - October 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program - October 2012 bb_view_october2012.pdf (136.66 KB) More Documents & Publications The Better Buildings Neighborhood View -- July 2013 The Better Buildings Neighborhood View -- Fall 2011 The Better Buildings Neighborhood View -- Decembe

  17. Revisited reaction-diffusion model of thermal desorption spectroscopy experiments on hydrogen retention in material

    SciTech Connect (OSTI)

    Guterl, Jerome Smirnov, R. D.; Krasheninnikov, S. I.

    2015-07-28

    Desorption phase of thermal desorption spectroscopy (TDS) experiments performed on tungsten samples exposed to flux of hydrogen isotopes in fusion relevant conditions is analyzed using a reaction-diffusion model describing hydrogen retention in material bulk. Two regimes of hydrogen desorption are identified depending on whether hydrogen trapping rate is faster than hydrogen diffusion rate in material during TDS experiments. In both regimes, a majority of hydrogen released from material defects is immediately outgassed instead of diffusing deeply in material bulk when the evolution of hydrogen concentration in material is quasi-static, which is the case during TDS experiments performed with tungsten samples exposed to flux of hydrogen isotopes in fusion related conditions. In this context, analytical expressions of the hydrogen outgassing flux as a function of the material temperature are obtained with sufficient accuracy to describe main features of thermal desorption spectra (TDSP). These expressions are then used to highlight how characteristic temperatures of TDSP depend on hydrogen retention parameters, such as trap concentration or activation energy of detrapping processes. The use of Arrhenius plots to characterize retention processes is then revisited when hydrogen trapping takes place during TDS experiments. Retention processes are also characterized using the shape of desorption peaks in TDSP, and it is shown that diffusion of hydrogen in material during TDS experiment can induce long desorption tails visible aside desorption peaks at high temperature in TDSP. These desorption tails can be used to estimate activation energy of diffusion of hydrogen in material.

  18. TotalView Parallel Debugger at NERSC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The performance of the GUI can be greatly improved if used in conjunction with free NX software. The TotalView documentation web page is a good resource for learning more...

  19. Better Buildings Network View November 2015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BetterBuildings Network View News From the Field Capturing Efficiency in Residential Real Estate Transactions The U.S. Departmenr of Energy (DOE) has released More Real Estate ...

  20. JOBAID-VIEWING AN EMPLOYEE MATRIX (SUPERVISOR)

    Broader source: Energy.gov [DOE]

    The purpose of this job aid is to guide supervisor users through the step-by-step process of viewing an employee matrix within SuccessFactors Learning.

  1. Views on world markets - Canada

    SciTech Connect (OSTI)

    Passmore, J.

    1996-12-31

    If {open_quotes}market{close_quotes} is defined by hardware in the ground (as it should be), then the Canadian wind power market has been virtually non-existent (only 23 MW to date). The potential on the other hand is enormous (6400 MW likely to be developed). This potential has not been pursued because of unregulated electric utility monopolies, lack of political knowledge and interest, and punitive tax treatment for renewables. Recent initiatives including utility restructuring, federal plans for green power procurement, and proposed tax measures suggest that situation has potential for change. Interested parties should start familiarizing themselves with the Canadian players / market now, in order to be ready to move when the time comes (likely in the next three years). 3 tabs.

  2. Strong-Sludge Gas Retention and Release Mechanisms in Clay Simulants

    SciTech Connect (OSTI)

    Gauglitz, Phillip A.; Buchmiller, William C.; Probert, Samuel G.; Owen, Antionette T.; Brockman, Fred J.

    2012-02-24

    The Hanford Site has 28 double-shell tanks (DSTs) and 149 single-shell tanks (SSTs) containing radioactive wastes that are complex mixes of radioactive and chemical products. The mission of the Department of Energy's River Protection Project is to retrieve and treat the Hanford tank waste for disposal and close the tank farms. A key aspect of the mission is to retrieve and transfer waste from the SSTs, which are at greater risk for leaking, into DSTs for interim storage until the waste is transferred to and treated in the Waste Treatment and Immobilization Plant. There is, however, limited space in the existing DSTs to accept waste transfers from the SSTs, and approaches to overcoming the limited DST space will benefit the overall mission. The purpose of this study is to summarize and analyze the key previous experiment that forms the basis for the relaxed controls and to summarize progress and results on new experiments focused on understanding the conditions that result in low gas retention. The previous large-scale test used about 50 m3 of sediment, which would be unwieldy for doing multiple parametric experiments. Accordingly, experiments began with smaller-scale tests to determine whether the desired mechanisms can be studied without the difficulty of conducting very large experiments. The most significant results from the current experiments are that progressively lower gas retention occurs in tests with progressively deeper sediment layers and that the method of gas generation also affects the maximum retention. Based on the results of this study, it is plausible that relatively low gas retention could occur in sufficiently deep tank waste in DSTs. The current studies and previous work, however, have not explored how gas retention and release will behave when two or more layers with different properties are present.

  3. Isotope Effects and Helium Retention Behavior in Vanadium Tritide

    SciTech Connect (OSTI)

    Bowman, Jr., R. C.; Attalla, A.; Craft, B. D.

    1985-04-01

    The relaxation times of the H, T, and 3He nuclei have been measured in vanadium hydride and tritide samples. Substantial isotope effects in both the phase transition temperatures and diffusion parameters have been found. When compared to hydrides, the tritide samples have lower transition temperatures and faster mobilities. The differences in the occupancies of the interstitial sites are largely responsible for these isotope effects. Most of the helium atoms generated by tritium decay remain trapped in microscopic bubbles formed with the VTx lattice. Evidence is presented for the gradual growth of the helium bubbles over periods of hundreds of days.

  4. Better Buildings Network View | April 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | April 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View April 2014 (130.28 KB) More Documents & Publications Better Buildings Network View | December 2014 Better Buildings Residential Network Orientation Webinar Better Buildings Network View | May

  5. Better Buildings Network View | December 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | December 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View December 2014 (252.31 KB) More Documents & Publications Better Buildings Network View | February 2014 Better Buildings Network View | November 2014 Lessons Learned: Peer Exchange Calls -- No. 3

  6. Better Buildings Network View | January 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | January 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View January 2015 (161.17 KB) More Documents & Publications Better Buildings Network View | December 2014 Lessons Learned: Peer Exchange Calls -- No. 3 Better Buildings Network View | May

  7. Better Buildings Network View | November 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    November 2014 Better Buildings Network View | November 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View November 2014 (162.63 KB) More Documents & Publications Better Buildings Network View | July-August 2014 Better Buildings Residential Network Orientation Webinar Better Buildings Network View | December 2014

  8. The Better Buildings Neighborhood View - Summer 2011 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Summer 2011 The Better Buildings Neighborhood View - Summer 2011 The quarterly update newsletter of the Better Buildings program of the U.S. Department of Energy. BB Neighborhood View -- Summer 2011 (138.07 KB) More Documents & Publications The Better Buildings Neighborhood View -- January 2012 The Better Buildings Neighborhood View -- March 2012 The Better Buildings Neighborhood View -- May

  9. The Better Buildings Neighborhood View -- March 2012 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 2012 The Better Buildings Neighborhood View -- March 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program BB Neighborhood View -- March 2012 (292.36 KB) More Documents & Publications The Better Buildings Neighborhood View -- February 2012 The Better Buildings Neighborhood View -- January 2012 Commercial Buildings Integration Program Overview - 2015 BTO Peer Review

  10. TIMING APPARATUS

    DOE Patents [OSTI]

    Bennett, A.E.; Geisow, J.C.H.

    1956-04-17

    The timing device comprises an escapement wheel and pallet, a spring drive to rotate the escapement wheel to a zero position, means to wind the pretensioned spring proportional to the desired signal time, and a cam mechanism to control an electrical signal switch by energizing the switch when the spring has been wound to the desired position, and deenergizing it when it reaches the zero position. This device produces an accurately timed signal variably witain the control of the operator.

  11. Optic for an endoscope/borescope having high resolution and narrow field of view

    DOE Patents [OSTI]

    Stone, Gary F.; Trebes, James E.

    2003-10-28

    An optic having optimized high spatial resolution, minimal nonlinear magnification distortion while at the same time having a limited chromatic focal shift or chromatic aberrations. The optic located at the distal end of an endoscopic inspection tool permits a high resolution, narrow field of view image for medical diagnostic applications, compared to conventional optics for endoscopic instruments which provide a wide field of view, low resolution image. The image coverage is over a narrow (<20 degrees) field of view with very low optical distortion (<5% pin cushion or barrel distortion. The optic is also optimized for best color correction as well as to aid medical diagnostics.

  12. The Better Buildings Neighborhood View -- August 2012 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy August 2012 The Better Buildings Neighborhood View -- August 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program. BB Neighborhood View -- August 2012 (133.92 KB) More Documents & Publications The Better Buildings Neighborhood View - September 2012 The Better Buildings Neighborhood View -- July 2012 The Better Buildings Neighborhood View -- June 2012

  13. A Discussion of SY-101 Crust Gas Retention and Release Mechanisms

    SciTech Connect (OSTI)

    SD Rassat; PA Gauglitz; SM Caley; LA Mahoney; DP Mendoza

    1999-02-23

    The flammable gas hazard in Hanford waste tanks was made an issue by the behavior of double-shell Tank (DST) 241-SY-101 (SY-101). Shortly after SY-101 was filled in 1980, the waste level began rising periodically, due to the generation and retention of gases within the slurry, and then suddenly dropping as the gases were released. An intensive study of the tank's behavior revealed that these episodic releases posed a safety hazard because the released gas was flammable, and, in some cases, the volume of gas released was sufficient to exceed the lower flammability limit (LFL) in the tank headspace (Allemann et al. 1993). A mixer pump was installed in SY-101 in late 1993 to prevent gases from building up in the settled solids layer, and the large episodic gas releases have since ceased (Allemann et al. 1994; Stewart et al. 1994; Brewster et al. 1995). However, the surface level of SY-101 has been increasing since at least 1995, and in recent months the level growth has shown significant and unexpected acceleration. Based on a number of observations and measurements, including data from the void fraction instrument (VFI), we have concluded that the level growth is caused largely by increased gas retention in the floating crust. In September 1998, the crust contained between about 21 and 43% void based on VFI measurements (Stewart et al. 1998). Accordingly, it is important to understand the dominant mechanisms of gas retention, why the gas retention is increasing, and whether the accelerating level increase will continue, diminish or even reverse. It is expected that the retained gas in the crust is flammable, with hydrogen as a major constituent. This gas inventory would pose a flammable gas hazard if it were to release suddenly. In May 1997, the mechanisms of bubble retention and release from crust material were the subject of a workshop. The evaluation of the crust and potential hazards assumed a more typical void of roughly 15% gas. It could be similar to percolati

  14. Time Off

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Time Off Time Off A comprehensive benefits package with plan options for health care and retirement to take care of our employees today and tomorrow. Contact Benefits Office (505) 667-1806 Email Time Off Work schedules A variety of work schedules are available that allow flexibility for workers and Laboratory programs. The most popular work schedule is the 9/80-employees work 80 hours over a 9 workday (two week) period, with a Friday off every other week. Holidays The Lab recognizes these 12

  15. Dumping Dirty Diesels: The View From the Bridge | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dumping Dirty Diesels: The View From the Bridge Dumping Dirty Diesels: The View From the Bridge 2005 Diesel Engine Emissions Reduction (DEER) Conference Presentations and Posters ...

  16. Mountain View Power Partners II Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    II Wind Farm Jump to: navigation, search Name Mountain View Power Partners II Wind Farm Facility Mountain View Power Partners II Sector Wind energy Facility Type Commercial Scale...

  17. OpenEI:Neutral point of view | Open Energy Information

    Open Energy Info (EERE)

    point of view Jump to: navigation, search Neutral point of view (NPOV) means that articles and content contributed or edited on the platform must be unbiased. All significant...

  18. The Better Buildings Neighborhood View -- January 2013 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 The Better Buildings Neighborhood View -- January 2013 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings...

  19. The Better Buildings Neighborhood View -- July 2013 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 The Better Buildings Neighborhood View -- July 2013 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood...

  20. The Better Buildings Neighborhood View -- April 2013 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 The Better Buildings Neighborhood View -- April 2013 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood...

  1. The Better Buildings Neighborhood View -- April 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 The Better Buildings Neighborhood View -- April 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood...

  2. The Better Buildings Neighborhood View -- August 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    August 2012 The Better Buildings Neighborhood View -- August 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings...

  3. Better Buildings Network View | November 2015 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | November 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF...

  4. The Better Buildings Neighborhood View -- June 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    June 2012 The Better Buildings Neighborhood View -- June 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings...

  5. The Better Buildings Neighborhood View -- July 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 The Better Buildings Neighborhood View -- July 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood...

  6. The Better Buildings Neighborhood View -- January 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 The Better Buildings Neighborhood View -- January 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings...

  7. The Better Buildings Neighborhood View -- May 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - May 2012 The Better Buildings Neighborhood View -- May 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings...

  8. The Better Buildings Neighborhood View -- Fall 2011 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fall 2011 The Better Buildings Neighborhood View -- Fall 2011 Better Buildings Neighborhood View, from the Better Buildings Neighborhood Program of the U.S. Department of Energy. ...

  9. Better Buildings Network View | January 2016 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Better Buildings Network View | January 2016 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  10. Better Buildings Network View | June 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | June 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF icon ...

  11. Better Buildings Network View | October 2014 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    October 2014 Better Buildings Network View | October 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential ...

  12. Better Buildings Network View | January 2015 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | January 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  13. Better Buildings Network View | February 2014 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | February 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  14. Better Buildings Network View | July-August 2014 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | July-August 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. ...

  15. Better Buildings Network View | February 2016 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Better Buildings Network View | February 2016 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  16. Better Buildings Network View | May 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | May 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF icon ...

  17. Better Buildings Network View | March 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | March 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  18. Better Buildings Network View | April 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | April 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  19. Better Buildings Network View | December 2014 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | December 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  20. Better Buildings Network View | March 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | March 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  1. Better Buildings Network View | January 2014 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | January 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  2. Better Buildings Network View | October 2015 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | October 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  3. Better Buildings Network View | March 2016 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Better Buildings Network View | March 2016 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  4. Better Buildings Network View | June 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | June 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF icon ...

  5. Better Buildings Network View | July-August 2015 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | July-August 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. ...

  6. Better Buildings Network View | April 2014 | Department of Energy

    Office of Environmental Management (EM)

    Residential Network. Better Buildings Network View April 2014 (130.28 KB) More Documents & Publications Better Buildings Network View | December 2014 Better Buildings Residential ...

  7. Better Buildings Network View | May 2015 | Department of Energy

    Office of Environmental Management (EM)

    Residential Network. Better Buildings Network View May 2015 (548.9 KB) More Documents & Publications Better Buildings Network View | June 2015 Home Performance with ENERGY STAR ...

  8. The Better Buildings Neighborhood View -- February 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Better Buildings Neighborhood View -- March 2012 The Better Buildings Neighborhood View -- January 2012 Microsoft Word - T4VEICTO2 Sub3Residential Retrofit Program Design ...

  9. Mountain View Power Partners III Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    III Wind Farm Jump to: navigation, search Name Mountain View Power Partners III Wind Farm Facility Mountain View Power Partners III Sector Wind energy Facility Type Commercial...

  10. City of Mountain View, Missouri (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    View Place: Missouri Phone Number: (417) 934-2601 Website: mountainviewmo.comindex.phpg Facebook: https:www.facebook.comCityOfMountainViewMissouri Outage Hotline: (877)...

  11. The Better Buildings Neighborhood View -- March 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 2012 The Better Buildings Neighborhood View -- March 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings ...

  12. Fundamental continuity equation for material transport in fractured media and retention factor for a system of joints

    SciTech Connect (OSTI)

    Mukhopadhyay, N.C.; Hadermann, J.

    1982-01-01

    Transport of radioactive nuclides through a system of joints is discussed including a linear sorption isotherm. The expression for the effective retention factor is derived for (a) a single joint, (b) a system of identical joints separated by a given distance, and (c) a system of joints with arbitrary apertures and sorption characteristics. It is shown that the retention factors for cases a and b are the same. In the limit of dense fractures, the retention factor for the porous medium is recovered. Relevance to the one-dimensional geosphere transport problem in the heterogeneous geology is pointed out. An arbitrary number of joint sets can now be included in such a problem.

  13. Transport mechanisms acting in toroidal devices: A theoretician's view

    SciTech Connect (OSTI)

    Carreras, B.A.

    1993-01-01

    Understanding the basic mechanisms of transport in toroidal confinement devices remains one of the more challenging scientific issues in magnetic confinement. At the same time, it is a critical issue for the magnetic fusion program. Recent progress in understanding fluctuations and transport has been fostered by the development and use of new diagnostics, bringing new perspectives on these studies. This has stimulated new theoretical developments. A view of the most recent issues and progress in this area is given. The role of long wavelengths in core transport and the relation between shear flows and turbulence at the plasma edge are the primary topics considered.

  14. Retention sleeve for a thermal medium carrying tube in a gas turbine

    DOE Patents [OSTI]

    Lathrop, Norman Douglas (Ballston Lake, NY); Czachor, Robert Paul (Cincinnati, OH)

    2003-01-01

    Multiple tubes are connected to steam supply and spent cooling steam return manifolds for supplying cooling steam to buckets and returning spent cooling steam from the buckets to the manifolds, respectively. The tubes are prevented from axial movement in one direction by flanges engaging end faces of the spacer between the first and second-stage wheels. Retention sleeves are disposed about cantilevered ends of the tubes. One end of the retention sleeve engages an enlarged flange on the tube, while an opposite end is spaced axially from an end face of the adjoining wheel, forming a gap, enabling thermal expansion of the tubes and limiting axial displacement of the tube in the opposite direction.

  15. Rayleigh-Taylor Instability within Sediment Layers Due to Gas Retention: Preliminary Theory and Experiments

    SciTech Connect (OSTI)

    Gauglitz, Phillip A.; Wells, Beric E.; Buchmiller, William C.; Rassat, Scot D.

    2013-03-21

    In Hanford underground waste storage tanks, a typical waste configuration is settled beds of waste particles beneath liquid layers. The settled beds are typically composed of layers, and these layers can have different physical and chemical properties. One postulated configuration within the settled bed is a less-dense layer beneath a more-dense layer. The different densities can be a result of different gas retention in the layers or different degrees of settling and compaction in the layers. This configuration can experience a Rayleigh-Taylor (RT) instability where the less dense lower layer rises into the upper layer. Previous studies of gas retention and release have not considered potential buoyant motion within a settle bed of solids. The purpose of this report is to provide a review of RT instabilities, discuss predictions of RT behavior for sediment layers, and summarize preliminary experimental observations of RT instabilities in simulant experiments.

  16. Effects of Globally Waste Disturbing Activities on Gas Generation, Retention, and Release in Hanford Waste Tanks

    SciTech Connect (OSTI)

    Stewart, Charles W.; Fountain, Matthew S.; Huckaby, James L.; Mahoney, Lenna A.; Meyer, Perry A.; Wells, Beric E.

    2005-08-02

    Various operations are authorized in Hanford single- and double-shell tanks that disturb all or a large fraction of the waste. These globally waste-disturbing activities have the potential to release a large fraction of the retained flammable gas and to affect future gas generation, retention, and release behavior. This report presents analyses of the expected flammable gas release mechanisms and the potential release rates and volumes resulting from these activities. The background of the flammable gas safety issue at Hanford is summarized, as is the current understanding of gas generation, retention, and release phenomena. Considerations for gas monitoring and assessment of the potential for changes in tank classification and steady-state flammability are given.

  17. Geotechnical Analysis of Five Shelby Tube Samples from H-Area Retention Basin

    SciTech Connect (OSTI)

    Langton, C.A.

    1999-06-02

    Geotechnical and geochemical analyses were performed on five Shelby tube samples collected in the H-Area Retention Basin (HRB) during July and August of 1998. The samples were collected as part of the HRB characterization study. The test results, which are documented in this report, will be used to support the HRB contaminant fate and transport modeling/analysis and to evaluate remedial options. The results will also be used as a base line for future treatability studies.

  18. Detailed Analysis of a Late-Phase Core-Melt Progression for the Evaluation of In-vessel Corium Retention

    SciTech Connect (OSTI)

    J. L. Rempe; R. J. Park; S. B. Kim; K. Y. Suh; F. B.Cheung

    2006-12-01

    Detailed analyses of a late-phase melt progression in the advanced power reactor (APR)1400 were completed to identify the melt and the thermal-hydraulic states of the in-vessel materials in the reactor vessel lower plenum at the time of reactor vessel failure to evaluate the candidate strategies for an in-vessel corium retention (IVR). Initiating events considered included high-pressure transients of a total loss of feed water (LOFW) and a station blackout (SBO) and low-pressure transients of a 0.0009-m2 small, 0.0093-m2 medium, and 0.0465-m2 large-break loss-of-coolant accident (LOCA) without safety injection. Best-estimate simulations for these low-probability events with conservative accident progression assumptions that lead to reactor vessel failure were performed by using the SCDAP/RELAP5/MOD3.3 computer code. The SCDAP/RELAP5/MOD3.3 results have shown that the pressurizer surge line failed before the reactor vessel failure, which results in a rapid decrease of the in-vessel pressure and a delay of the reactor vessel failure time of ~40 min in the high-pressure sequences of the total LOFW and the SBO transients. In all the sequences, ~80 to 90% of the core material was melted and relocated to the lower plenum of the reactor vessel at the time of reactor vessel failure. The maximum value of the volumetric heat source in the corium pool was estimated as 1.9 to 3.7 MW/m3. The corium temperature was ~2800 to 3400 K at the time of reactor vessel failure. The highest volumetric heat source sequence is predicted for the 0.0465-m2 large-break LOCA without safety injection in the APR1400, because this sequence leads to an early reactor vessel failure.

  19. Linked-View Parallel Coordinate Plot Renderer

    Energy Science and Technology Software Center (OSTI)

    2011-06-28

    This software allows multiple linked views for interactive querying via map-based data selection, bar chart analytic overlays, and high dynamic range (HDR) line renderings. The major component of the visualization package is a parallel coordinate renderer with binning, curved layouts, shader-based rendering, and other techniques to allow interactive visualization of multidimensional data.

  20. Better Buildings Network View | December 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | December 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View December 2015 (191.86 KB) More Documents & Publications BBRN Factsheet: Case Study: Community Engagement Better Buildings Network View | July-August 2015 Better Buildings Residential Network Orientation Webinar

  1. The Better Buildings Neighborhood View - September 2012 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy September 2012 The Better Buildings Neighborhood View - September 2012 Monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program. BB Neighborhood View -- September 2012 (140.07 KB) More Documents & Publications The Better Buildings Neighborhood View -- Fall 2011 The Better Buildings Neighborhood View -- July 2013

  2. The Better Buildings Neighborhood View -- February 2012 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy February 2012 The Better Buildings Neighborhood View -- February 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program. BB Neighborhood View -- February 2012 (250.14 KB) More Documents & Publications The Better Buildings Neighborhood View -- March 2012 The Better Buildings Neighborhood View -- January 2012 Microsoft Word - T4_VEIC_TO2_ Sub3_Residential Retrofit Program Design Guide Play Book_TEAM 4

  3. The Better Buildings Neighborhood View -- January 2013 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy 3 The Better Buildings Neighborhood View -- January 2013 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program -- January 2013. BB Neighborhood View -- January 2013 (181 KB) More Documents & Publications The Better Buildings Neighborhood View - September 2012 The Better Buildings Neighborhood View - October 2012 It's Academic: BetterBuildings for Michigan Partners With University to Reach Employees

  4. Better Buildings Network View, April 2016

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    View, April 2016 News From the Field Leverage Earth Day to Promote Energy Efficiency Learn how to leverage Earth Day and other holidays by visiting the Better Buildings Residential Program Solution Center for helpful peer exchange call summaries and case studies: Read the Peer Exchange Call summary "Leveraging Seasonal Opportunities for Marketing Energy Efficiency" featuring Better Buildings Residential Network member green spaces (Chattanooga, TN). Review the "Leveraging Holidays

  5. Better Buildings Network View, June 2015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Better Buildings Network View News From the Field June 2015 First-Ever Network Member Gathering Held at 2015 Better Buildings Summit More than 800 participants met at the 2015 Better Buildings Summit in Washington, D.C., to engage in dialogue focused on sharing proven approaches for greater energy efficiency in buildings. This year was the first to incorporate the residential sector with targeted sessions for energy efficiency program administrators and partners. Speakers included leaders from

  6. Better Buildings Network View, June 2016

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Buildings Network View, June 2016 News From the Field Learn From the Top Peer Exchange Call Takeaways The sixth Lessons Learned: Peer Exchange Calls "greatest hits" fact sheet summarizes top takeaways about customer service and other tips shared by Better Buildings Residential Network members during Peer Exchange Calls held in fall 2015. Here are two takeaways: Leverage HVAC upgrades to spark conversations about whole- home performance. Customers, who have put their trust in a

  7. Better Buildings Network View, March 2015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Better Buildings Network View | March 2015 News From the Field March 2015 Motivate Energy Upgrades With New Network Incentives Toolkit The Better Buildings Residential Network has Voluntary Initiatives Get developed a Designing Social-Take Part Incentives Toolkit to help energy efficiency organizations design incentives that motivate potential customers to act by lowering the risk, decreasing the cost, or offering additional benefits with home energy upgrades. Many residential energy efficiency

  8. Hanford Facility dangerous waste permit application, liquid effluent retention facility and 200 area effluent treatment facility

    SciTech Connect (OSTI)

    Coenenberg, J.G.

    1997-08-15

    The Hanford Facility Dangerous Waste Permit Application is considered to 10 be a single application organized into a General Information Portion (document 11 number DOE/RL-91-28) and a Unit-Specific Portion. The scope of the 12 Unit-Specific Portion is limited to Part B permit application documentation 13 submitted for individual, `operating` treatment, storage, and/or disposal 14 units, such as the Liquid Effluent Retention Facility and 200 Area Effluent 15 Treatment Facility (this document, DOE/RL-97-03). 16 17 Both the General Information and Unit-Specific portions of the Hanford 18 Facility Dangerous Waste Permit Application address the content of the Part B 19 permit application guidance prepared by the Washington State Department of 20 Ecology (Ecology 1987 and 1996) and the U.S. Environmental Protection Agency 21 (40 Code of Federal Regulations 270), with additional information needs 22 defined by the Hazardous and Solid Waste Amendments and revisions of 23 Washington Administrative Code 173-303. For ease of reference, the Washington 24 State Department of Ecology alpha-numeric section identifiers from the permit 25 application guidance documentation (Ecology 1996) follow, in brackets, the 26 chapter headings and subheadings. A checklist indicating where information is 27 contained in the Liquid Effluent Retention Facility and 200 Area Effluent 28 Treatment Facility permit application documentation, in relation to the 29 Washington State Department of Ecology guidance, is located in the Contents 30 Section. 31 32 Documentation contained in the General Information Portion is broader in 33 nature and could be used by multiple treatment, storage, and/or disposal units 34 (e.g., the glossary provided in the General Information Portion). Wherever 35 appropriate, the Liquid Effluent Retention Facility and 200 Area Effluent 36 Treatment Facility permit application documentation makes cross-reference to 37 the General Information Portion, rather than duplicating

  9. Method for training honeybees to respond to olfactory stimuli and enhancement of memory retention therein

    SciTech Connect (OSTI)

    McCade, Kirsten J.; Wingo, Robert M.; Haarmann, Timothy K.; Sutherland, Andrew; Gubler, Walter D.

    2015-12-15

    A specialized conditioning protocol for honeybees that is designed for use within a complex agricultural ecosystem. This method ensures that the conditioned bees will be less likely to exhibit a conditioned response to uninfected plants, a false positive response that would render such a biological sensor unreliable for agricultural decision support. Also described is a superboosting training regime that allows training without the aid of expensive equipment and protocols for training in out in the field. Also described is a memory enhancing cocktail that aids in long term memory retention of a vapor signature. This allows the bees to be used in the field for longer durations and with fewer bees trained overall.

  10. RVA: A Plugin for ParaView 3.14

    SciTech Connect (OSTI)

    2015-09-04

    RVA is a plugin developed for the 64-bit Windows version of the ParaView 3.14 visualization package. RVA is designed to provide support in the visualization and analysis of complex reservoirs being managed using multi-fluid EOR techniques. RVA, for Reservoir Visualization and Analysis, was developed at the University of Illinois at Urbana-Champaign, with contributions from the Illinois State Geological Survey, Department of Computer Science and National Center for Supercomputing Applications. RVA was designed to utilize and enhance the state-of-the-art visualization capabilities within ParaView, readily allowing joint visualization of geologic framework and reservoir fluid simulation model results. Particular emphasis was placed on enabling visualization and analysis of simulation results highlighting multiple fluid phases, multiple properties for each fluid phase (including flow lines), multiple geologic models and multiple time steps. Additional advanced functionality was provided through the development of custom code to implement data mining capabilities. The built-in functionality of ParaView provides the capacity to process and visualize data sets ranging from small models on local desktop systems to extremely large models created and stored on remote supercomputers. The RVA plugin that we developed and the associated User Manual provide improved functionality through new software tools, and instruction in the use of ParaView-RVA, targeted to petroleum engineers and geologists in industry and research. The RVA web site (http://rva.cs.illinois.edu) provides an overview of functions, and the development web site (https://github.com/shaffer1/RVA) provides ready access to the source code, compiled binaries, user manual, and a suite of demonstration data sets. Key functionality has been included to support a range of reservoirs visualization and analysis needs, including: sophisticated connectivity analysis, cross sections through simulation results between

  11. RVA: A Plugin for ParaView 3.14

    Energy Science and Technology Software Center (OSTI)

    2015-09-04

    RVA is a plugin developed for the 64-bit Windows version of the ParaView 3.14 visualization package. RVA is designed to provide support in the visualization and analysis of complex reservoirs being managed using multi-fluid EOR techniques. RVA, for Reservoir Visualization and Analysis, was developed at the University of Illinois at Urbana-Champaign, with contributions from the Illinois State Geological Survey, Department of Computer Science and National Center for Supercomputing Applications. RVA was designed to utilize andmore » enhance the state-of-the-art visualization capabilities within ParaView, readily allowing joint visualization of geologic framework and reservoir fluid simulation model results. Particular emphasis was placed on enabling visualization and analysis of simulation results highlighting multiple fluid phases, multiple properties for each fluid phase (including flow lines), multiple geologic models and multiple time steps. Additional advanced functionality was provided through the development of custom code to implement data mining capabilities. The built-in functionality of ParaView provides the capacity to process and visualize data sets ranging from small models on local desktop systems to extremely large models created and stored on remote supercomputers. The RVA plugin that we developed and the associated User Manual provide improved functionality through new software tools, and instruction in the use of ParaView-RVA, targeted to petroleum engineers and geologists in industry and research. The RVA web site (http://rva.cs.illinois.edu) provides an overview of functions, and the development web site (https://github.com/shaffer1/RVA) provides ready access to the source code, compiled binaries, user manual, and a suite of demonstration data sets. Key functionality has been included to support a range of reservoirs visualization and analysis needs, including: sophisticated connectivity analysis, cross sections through simulation results

  12. A dynamic intron retention program enriched in RNA processing genes regulates gene expression during terminal erythropoiesis

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Pimentel, Harold; Parra, Marilyn; Gee, Sherry L.; Mohandas, Narla; Pachter, Lior; Conboy, John G.

    2015-11-03

    Differentiating erythroblasts execute a dynamic alternative splicing program shown here to include extensive and diverse intron retention (IR) events. Cluster analysis revealed hundreds of developmentallydynamic introns that exhibit increased IR in mature erythroblasts, and are enriched in functions related to RNA processing such as SF3B1 spliceosomal factor. Distinct, developmentally-stable IR clusters are enriched in metal-ion binding functions and include mitoferrin genes SLC25A37 and SLC25A28 that are critical for iron homeostasis. Some IR transcripts are abundant, e.g. comprising ~50% of highly-expressed SLC25A37 and SF3B1 transcripts in late erythroblasts, and thereby limiting functional mRNA levels. IR transcripts tested were predominantly nuclearlocalized. Splicemore » site strength correlated with IR among stable but not dynamic intron clusters, indicating distinct regulation of dynamically-increased IR in late erythroblasts. Retained introns were preferentially associated with alternative exons with premature termination codons (PTCs). High IR was observed in disease-causing genes including SF3B1 and the RNA binding protein FUS. Comparative studies demonstrated that the intron retention program in erythroblasts shares features with other tissues but ultimately is unique to erythropoiesis. Finally, we conclude that IR is a multi-dimensional set of processes that post-transcriptionally regulate diverse gene groups during normal erythropoiesis, misregulation of which could be responsible for human disease.« less

  13. Radionuclide Retention Mechanisms in Secondary Waste-Form Testing: Phase II

    SciTech Connect (OSTI)

    Um, Wooyong; Valenta, Michelle M.; Chung, Chul-Woo; Yang, Jungseok; Engelhard, Mark H.; Serne, R. Jeffrey; Parker, Kent E.; Wang, Guohui; Cantrell, Kirk J.; Westsik, Joseph H.

    2011-09-26

    This report describes the results from laboratory tests performed at Pacific Northwest National Laboratory (PNNL) for Washington River Protection Solutions (WRPS) to evaluate candidate stabilization technologies that have the potential to successfully treat liquid secondary waste stream effluents produced by the Hanford Tank Waste Treatment and Immobilization Plant (WTP). WRPS is considering the design and construction of a Solidification Treatment Unit (STU) for the Effluent Treatment Facility (ETF) at Hanford. The ETF, a multi-waste, treatment-and-storage unit that has been permitted under the Resource Conservation and Recovery Act (RCRA), can accept dangerous, low-level, and mixed wastewaters for treatment. The STU needs to be operational by 2018 to receive secondary liquid waste generated during operation of the WTP. The STU will provide the additional capacity needed for ETF to process the increased volume of secondary waste expected to be produced by WTP. This report on radionuclide retention mechanisms describes the testing and characterization results that improve understanding of radionuclide retention mechanisms, especially for pertechnetate, {sup 99}TcO{sub 4}{sup -} in four different waste forms: Cast Stone, DuraLith alkali aluminosilicate geopolymer, encapsulated fluidized bed steam reforming (FBSR) product, and Ceramicrete phosphate bonded ceramic. These data and results will be used to fill existing data gaps on the candidate technologies to support a decision-making process that will identify a subset of the candidate waste forms that are most promising and should undergo further performance testing.

  14. RETENTION AND CHEMICAL SPECIATION OF URANIUM IN A WETLAND ON THE SAVANNAH RIVER SITE

    SciTech Connect (OSTI)

    Li, D.; CHANG, H.: SEAMAN, J.; Jaffe, P.; Groos, P.; Jiang, D.; Chen, N.; Lin, J.; Arthur, Z.; Scheckel, K.; Kaplan, D.

    2013-06-17

    Uranium speciation and retention mechanism onto Savannah River Site (SRS) wetland sediments was studied using batch (ad)sorption experiments, sequential extraction desorption tests and U L{sub 3}-edge X-ray absorption near-edge structure (XANES) spectroscopy of contaminated wetland sediments. U was highly retained by the SRS wetland sediments. In contrast to other similar but much lower natural organic matter (NOM) sediments, significant sorption of U onto the SRS sediments was observed at pH <4 and pH >8. Sequential extraction tests indicated that the U(VI) species were primarily associated with the acid soluble fraction (weak acetic acid extractable) and NOM fraction (Na-pyrophosphate extractable). Uranium L3- edge XANES spectra of the U-retained sediments were nearly identical to that of uranyl acetate. The primary oxidation state of U in these sediments was as U(VI), and there was little evidence that the high sorptive capacity of the sediments could be ascribed to abiotic or biotic reduction to the less soluble U(IV) species. The molecular mechanism responsible for the high U retention in the SRS wetland sediments is likely related to the chemical bonding of U to organic carbon.

  15. A dynamic intron retention program enriched in RNA processing genes regulates gene expression during terminal erythropoiesis

    SciTech Connect (OSTI)

    Pimentel, Harold; Parra, Marilyn; Gee, Sherry L.; Mohandas, Narla; Pachter, Lior; Conboy, John G.

    2015-11-03

    Differentiating erythroblasts execute a dynamic alternative splicing program shown here to include extensive and diverse intron retention (IR) events. Cluster analysis revealed hundreds of developmentallydynamic introns that exhibit increased IR in mature erythroblasts, and are enriched in functions related to RNA processing such as SF3B1 spliceosomal factor. Distinct, developmentally-stable IR clusters are enriched in metal-ion binding functions and include mitoferrin genes SLC25A37 and SLC25A28 that are critical for iron homeostasis. Some IR transcripts are abundant, e.g. comprising ~50% of highly-expressed SLC25A37 and SF3B1 transcripts in late erythroblasts, and thereby limiting functional mRNA levels. IR transcripts tested were predominantly nuclearlocalized. Splice site strength correlated with IR among stable but not dynamic intron clusters, indicating distinct regulation of dynamically-increased IR in late erythroblasts. Retained introns were preferentially associated with alternative exons with premature termination codons (PTCs). High IR was observed in disease-causing genes including SF3B1 and the RNA binding protein FUS. Comparative studies demonstrated that the intron retention program in erythroblasts shares features with other tissues but ultimately is unique to erythropoiesis. Finally, we conclude that IR is a multi-dimensional set of processes that post-transcriptionally regulate diverse gene groups during normal erythropoiesis, misregulation of which could be responsible for human disease.

  16. ALS Technique Gives Novel View of Lithium Battery Dendrite Growth

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Technique Gives Novel View of Lithium Battery Dendrite Growth ALS Technique Gives Novel View of Lithium Battery Dendrite Growth Print Thursday, 24 April 2014 09:46 Lithium-ion ...

  17. BloombergBusiness: Viewed from space: less corn

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Viewed from space: less corn Viewed from space: less corn U.S. corn production is 2.8 percent smaller than government estimates, according to a daily analysis of infrared satellite ...

  18. Mountain View Power Partners I Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    I Wind Farm Jump to: navigation, search Name Mountain View Power Partners I Wind Farm Facility Mountain View Power Partners I Sector Wind energy Facility Type Commercial Scale Wind...

  19. New Window Technology Saves Energy and the View | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Window Technology Saves Energy and the View New Window Technology Saves Energy and the View November 5, 2013 - 3:55pm Addthis Researchers at the Energy Department's National...

  20. Fragment Yields Calculated in a Time-Dependent Microscopic Theory...

    Office of Scientific and Technical Information (OSTI)

    Fragment Yields Calculated in a Time-Dependent Microscopic Theory of Fission Citation ... Word Cloud More Like This Full Text preview image File size NAView Full Text View Full ...

  1. Accessing Your Account for the First Time.............................................................................................................2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Responding to an RFQ Table of Contents Accessing Your Account for the First Time.............................................................................................................2 How to View Open RFQs...........................................................................................................................................3 How to Download Attachments from the RFQ......................................................................................................4

  2. Better Buildings Network View | July-August 2014

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  3. The Better Buildings Neighborhood View -- December 2013 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy December 2013 The Better Buildings Neighborhood View -- December 2013 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program. BB Neighborhood View -- December 2013 (214.78 KB) More Documents & Publications The Better Buildings Neighborhood View -- July 2013 Focus Series: Philadelphia Energyworks: In the City of Brotherly Love, Sharing Know-How Leads to Sustainability The Better Buildings Neighborhood

  4. Multidimensional display controller for displaying to a user an aspect of a multidimensional space visible from a base viewing location along a desired viewing orientation

    DOE Patents [OSTI]

    Davidson, George S.; Anderson, Thomas G.

    2001-01-01

    A display controller allows a user to control a base viewing location, a base viewing orientation, and a relative viewing orientation. The base viewing orientation and relative viewing orientation are combined to determine a desired viewing orientation. An aspect of a multidimensional space visible from the base viewing location along the desired viewing orientation is displayed to the user. The user can change the base viewing location, base viewing orientation, and relative viewing orientation by changing the location or other properties of input objects.

  5. Reactive amendment saltstone (RAS). A novel approach for improved sorption/retention of radionuclides such as technetium and iodine

    SciTech Connect (OSTI)

    Dixon, K. L.; Knox, A. S.; Cozzi, A. D.; Flach, G. P.; Hill, K. A.

    2015-09-30

    This study examined the use of reactive amendments (hydroxyapatite, activated carbon, and two types of organoclays) that prior research suggests may improve retention of 99Tc and 129I. Tests were conducted using surrogates for 99Tc (NaReO4) and 129I (NaI). Results showed that adding up to 10% of organoclay improved the retention of Re without adversely impacting hydraulic properties. To a lesser extent, iodine retention was also improved by adding up to 10% organoclay. Numerical modeling showed that using organoclay as a reactive barrier may significantly retard 99Tc release from saltstone disposal units.

  6. A Wide Field of View Plasma Spectrometer

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Skoug, Ruth M.; Funsten, Herbert O.; Moebius, Eberhard; Harper, Ron W.; Kihara, Keith H.; Bower, Jonathan S.

    2016-07-23

    Here we present a fundamentally new type of space plasma spectrometer, the wide field of view plasma spectrometer, whose field of view is >1.25π ster using fewer resources than traditional methods. The enabling component is analogous to a pinhole camera with an electrostatic energy-angle filter at the image plane. Particle energy-per-charge is selected with a tunable bias voltage applied to the filter plate relative to the pinhole aperture plate. For a given bias voltage, charged particles from different directions are focused by different angles to different locations. Particles with appropriate locations and angles can transit the filter plate and aremore » measured using a microchannel plate detector with a position-sensitive anode. Full energy and angle coverage are obtained using a single high-voltage power supply, resulting in considerable resource savings and allowing measurements at fast timescales. Lastly, we present laboratory prototype measurements and simulations demonstrating the instrument concept and discuss optimizations of the instrument design for application to space measurements.« less

  7. Exaggerated supine oblique view of the cervical spine

    SciTech Connect (OSTI)

    Abel, M.S.

    1982-06-01

    The technique of the 60 degree supine oblique view is described together with anatomic skeletal studies of this projection. The view is convenient for emergency room radiography and useful in other clinical radiography. The view separates widely the anterior and posterior portions of the vertebrae in a side to side projection. This makes for an elongated but detailed view of the articular processes, pedicles, and intervertebral foramina. In the cadavar specimen and clinically the view is shown to be useful in delineating fracture deformities of the articular process and visualizing constriction of the intervertebral foramen superiorly. Encroachment of the foramen superiorly is likely to compromise the emerging nerve root in this area.

  8. SU-D-210-03: Limited-View Multi-Source Quantitative Photoacoustic Tomography

    SciTech Connect (OSTI)

    Feng, J; Gao, H

    2015-06-15

    Purpose: This work is to investigate a novel limited-view multi-source acquisition scheme for the direct and simultaneous reconstruction of optical coefficients in quantitative photoacoustic tomography (QPAT), which has potentially improved signal-to-noise ratio and reduced data acquisition time. Methods: Conventional QPAT is often considered in two steps: first to reconstruct the initial acoustic pressure from the full-view ultrasonic data after each optical illumination, and then to quantitatively reconstruct optical coefficients (e.g., absorption and scattering coefficients) from the initial acoustic pressure, using multi-source or multi-wavelength scheme.Based on a novel limited-view multi-source scheme here, We have to consider the direct reconstruction of optical coefficients from the ultrasonic data, since the initial acoustic pressure can no longer be reconstructed as an intermediate variable due to the incomplete acoustic data in the proposed limited-view scheme. In this work, based on a coupled photo-acoustic forward model combining diffusion approximation and wave equation, we develop a limited-memory Quasi-Newton method (LBFGS) for image reconstruction that utilizes the adjoint forward problem for fast computation of gradients. Furthermore, the tensor framelet sparsity is utilized to improve the image reconstruction which is solved by Alternative Direction Method of Multipliers (ADMM). Results: The simulation was performed on a modified Shepp-Logan phantom to validate the feasibility of the proposed limited-view scheme and its corresponding image reconstruction algorithms. Conclusion: A limited-view multi-source QPAT scheme is proposed, i.e., the partial-view acoustic data acquisition accompanying each optical illumination, and then the simultaneous rotations of both optical sources and ultrasonic detectors for next optical illumination. Moreover, LBFGS and ADMM algorithms are developed for the direct reconstruction of optical coefficients from the

  9. Target Fabrication: A View from the Users

    SciTech Connect (OSTI)

    Kyrala, George A.; Balkey, Matthew M.; Barnes, Cris W.; Batha, Steven H.; Christensen, Cindy R.; Cobble, James A.; Fincke, James; Keiter, Paul; Lanier, Nicholas; Paisley, Dennis; Sorem, Michael; Swift, Damian; Workman, Jonathan

    2004-03-15

    Targets are used for a variety of purposes, but ultimately we use them to validate codes that help us predict and understand new phenomena or effects. The sophistication and complexity of High Energy Density Physics (HEDP) and Inertial Confinement Fusion (ICF) targets has increased in to match the advances made in modeling complex phenomena. The targets have changed from simple hohlraums, spherical geometries, and planar foils, to 3-dimensional geometries that require precision in construction, alignment, and metrology. Furthermore, material properties, such as surface morphologies and volume texture, have significant impact on the behavior of the targets and must be measured and controlled. In the following we will discuss how experimental physicists view targets and the influence that target construction has on interpreting the experimental results. We review a representative sampling of targets fabricated at the Los Alamos National Laboratory that are used in different experiments in support of ICF and HEDP.

  10. Interactive computer-enhanced remote viewing system

    SciTech Connect (OSTI)

    Tourtellott, J.A.; Wagner, J.F.

    1995-10-01

    Remediation activities such as decontamination and decommissioning (D&D) typically involve materials and activities hazardous to humans. Robots are an attractive way to conduct such remediation, but for efficiency they need a good three-dimensional (3-D) computer model of the task space where they are to function. This model can be created from engineering plans and architectural drawings and from empirical data gathered by various sensors at the site. The model is used to plan robotic tasks and verify that selected paths are clear of obstacles. This report describes the development of an Interactive Computer-Enhanced Remote Viewing System (ICERVS), a software system to provide a reliable geometric description of a robotic task space, and enable robotic remediation to be conducted more effectively and more economically.

  11. SUMMARY OF FY11 SULFATE RETENTION STUDIES FOR DEFENSE WASTE PROCESSING FACILITY GLASS

    SciTech Connect (OSTI)

    Fox, K.; Edwards, T.

    2012-05-08

    This report describes the results of studies related to the incorporation of sulfate in high level waste (HLW) borosilicate glass produced at the Savannah River Site (SRS) Defense Waste Processing Facility (DWPF). A group of simulated HLW glasses produced for earlier sulfate retention studies was selected for full chemical composition measurements to determine whether there is any clear link between composition and sulfate retention over the compositional region evaluated. In addition, the viscosity of several glasses was measured to support future efforts in modeling sulfate solubility as a function of predicted viscosity. The intent of these studies was to develop a better understanding of sulfate retention in borosilicate HLW glass to allow for higher loadings of sulfate containing waste. Based on the results of these and other studies, the ability to improve sulfate solubility in DWPF borosilicate glasses lies in reducing the connectivity of the glass network structure. This can be achieved, as an example, by increasing the concentration of alkali species in the glass. However, this must be balanced with other effects of reduced network connectivity, such as reduced viscosity, potentially lower chemical durability, and in the case of higher sodium and aluminum concentrations, the propensity for nepheline crystallization. Future DWPF processing is likely to target higher waste loadings and higher sludge sodium concentrations, meaning that alkali concentrations in the glass will already be relatively high. It is therefore unlikely that there will be the ability to target significantly higher total alkali concentrations in the glass solely to support increased sulfate solubility without the increased alkali concentration causing failure of other Product Composition Control System (PCCS) constraints, such as low viscosity and durability. No individual components were found to provide a significant improvement in sulfate retention (i.e., an increase of the magnitude

  12. DOE Tour of Zero Floorplans: Marine Drive by Clifton View Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Marine Drive by Clifton View Homes DOE Tour of Zero Floorplans: Marine Drive by Clifton View Homes DOE Tour of Zero Floorplans: Marine Drive by Clifton View...

  13. DOE Tour of Zero Floorplans: Port Hadlock by Clifton View Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Port Hadlock by Clifton View Homes DOE Tour of Zero Floorplans: Port Hadlock by Clifton View Homes DOE Tour of Zero Floorplans: Port Hadlock by Clifton View Homes...

  14. Uptake and Retention of Cs137 by a Blue-Green Alga in Continuous Flow and Batch Culture Systems

    SciTech Connect (OSTI)

    Watts, J.R.

    2003-02-18

    Since routine monitoring data show that blue-green algae concentrate radioactivity from water by factors as great as 10,000, this study was initiated to investigate the uptake and retention patterns of specific radionuclides by the dominant genera of blue-green algae in the reactor effluents. Plectonema purpureum was selected for this study.

  15. Better Buildings Network View | September 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    September 2015 Better Buildings Network View | September 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View September 2015 (528.19 KB) More Documents & Publications ITP Aluminum: Technical Working Group on Inert Anode Technologies EIS-0333: Draft Environmental Impact Statement ITP Aluminum: Energy and Environmental Profile of the U.S. Aluminum Industry

  16. MediaWiki:Pagetitle-view-mainpage | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Energy Information and Data | OpenEI.org Retrieved from "http:en.openei.orgwindex.php?titleMediaWiki:Pagetitle-view-mainpage&oldid277068...

  17. March 2016 Most Viewed Documents for Biology And Medicine | OSTI...

    Office of Scientific and Technical Information (OSTI)

    March 2016 Most Viewed Documents for Biology And Medicine Measuring dopamine release in the human brain with PET Volkow, N.D. Brookhaven National Lab., Upton, NY (United ...

  18. June 2014 Most Viewed Documents for Renewable Energy Sources...

    Office of Scientific and Technical Information (OSTI)

    June 2014 Most Viewed Documents for Renewable Energy Sources Chapter 6. Drilling and Well Construction Culver, Gene (1998) 426 Chapter 11. Heat Exchangers Rafferty, Kevin D.; ...

  19. Helix Wind Inc formerly ClearView Acquisitions | Open Energy...

    Open Energy Info (EERE)

    (formerly ClearView Acquisitions) Place: San Diego, California Zip: 92113 Sector: Wind energy Product: California-based manufacturer of small scale wind turbines. References: Helix...

  20. January 2013 Most Viewed Documents for Fission And Nuclear Technologie...

    Office of Scientific and Technical Information (OSTI)

    January 2013 Most Viewed Documents for Fission And Nuclear Technologies Laboratory studies of shearleach processing of zircaloy clad metallic uranium reactor fuel Swanson, J.L.; ...

  1. Tools for Viewing and Quality Checking ARM Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tools for Viewing and Quality Checking ARM Data S. Bottone and S. Moore Mission Research Corporation Santa Barbara, California Introduction Mission Research Corporation (MRC) is...

  2. September 2013 Most Viewed Documents for Mathematics And Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    September 2013 Most Viewed Documents for Mathematics And Computing Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 169 ...

  3. July 2013 Most Viewed Documents for Mathematics And Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    July 2013 Most Viewed Documents for Mathematics And Computing Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 567 A ...

  4. March 2014 Most Viewed Documents for Mathematics And Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    March 2014 Most Viewed Documents for Mathematics And Computing Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 291 Ten ...

  5. December 2015 Most Viewed Documents for Mathematics And Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    December 2015 Most Viewed Documents for Mathematics And Computing Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 1446 ...

  6. June 2015 Most Viewed Documents for Mathematics And Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    June 2015 Most Viewed Documents for Mathematics And Computing Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 833 Lecture ...

  7. September 2015 Most Viewed Documents for Mathematics And Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    September 2015 Most Viewed Documents for Mathematics And Computing Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 1049 ...

  8. Mountain View Acres, California: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    Mountain View Acres, California: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 34.496663, -117.3489352 Show Map Loading map......

  9. Mountain View, California: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Mountain View, California: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 37.3860517, -122.0838511 Show Map Loading map......

  10. Mountain View, Colorado: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Mountain View, Colorado: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 39.7744311, -105.0555389 Show Map Loading map... "minzoom":false,"mapp...

  11. March 2016 Most Viewed Documents for Geosciences | OSTI, US Dept...

    Office of Scientific and Technical Information (OSTI)

    March 2016 Most Viewed Documents for Geosciences Gas-phase diffusion in porous media: ... Transport in Variable Saturated Geologic Media Xu, Tianfu; Sonnenthal, Eric; Spycher, ...

  12. High Performance Builder Spotlight: Clifton View Homes II

    SciTech Connect (OSTI)

    2011-01-01

    Clifton View Homes builds superefficient homes that qualify for DOE’s Builders Challenge like this home on Whidbey Island that achieves a 57 on the HERS index.

  13. June 2014 Most Viewed Documents for Engineering | OSTI, US Dept...

    Office of Scientific and Technical Information (OSTI)

    June 2014 Most Viewed Documents for Engineering Damage identification and health ... D.; Bezburuah, R.; Ding, J. (1991) 22 Laser Engineered Net Shaping (LENS(TM)): A Tool ...

  14. New Window Technology Saves Energy and the View | Department...

    Energy Savers [EERE]

    Window Technology Saves Energy and the View New Window Technology Saves Energy and the ... Laboratory are developing innovative new window technology that helps improve ...

  15. Better Buildings Network View | September 2014 | Department of...

    Office of Environmental Management (EM)

    newsletter from the U.S. Department of Energy's Better Buildings Residential Network. ... Network View | December 2014 On-Bill Financing for Energy Efficiency Improvements Toolkit

  16. Better Buildings Network View | February 2015 | Department of...

    Office of Environmental Management (EM)

    newsletter from the U.S. Department of Energy's Better Buildings Residential Network. ... Better Buildings Network View | June 2015 Nothing But Networking for Residential Network ...

  17. Better Buildings Network View | November 2014 | Department of...

    Office of Environmental Management (EM)

    newsletter from the U.S. Department of Energy's Better Buildings Residential Network. ... Better Buildings Network View | July-August 2014 Better Buildings Residential Network ...

  18. Better Buildings Network View | December 2015 | Department of...

    Office of Environmental Management (EM)

    newsletter from the U.S. Department of Energy's Better Buildings Residential Network. ... Network View | July-August 2015 Better Buildings Residential Network Orientation Webinar

  19. June 2015 Most Viewed Documents for Biology And Medicine | OSTI...

    Office of Scientific and Technical Information (OSTI)

    June 2015 Most Viewed Documents for Biology And Medicine Measuring dopamine release in the human brain with PET Volkow, N.D. Brookhaven National Lab., Upton, NY (United ...

  20. September 2015 Most Viewed Documents for Biology And Medicine...

    Office of Scientific and Technical Information (OSTI)

    September 2015 Most Viewed Documents for Biology And Medicine Measuring dopamine release in the human brain with PET Volkow, N.D. Brookhaven National Lab., Upton, NY (United ...

  1. March 2014 Most Viewed Documents for Biology And Medicine | OSTI...

    Office of Scientific and Technical Information (OSTI)

    March 2014 Most Viewed Documents for Biology And Medicine Carbon Dioxide Sequestering Using Microalgal Systems Daniel J. Stepan; Richard E. Shockey; Thomas A. Moe; Ryan Dorn (2002) ...

  2. December 2015 Most Viewed Documents for Biology And Medicine...

    Office of Scientific and Technical Information (OSTI)

    December 2015 Most Viewed Documents for Biology And Medicine Measuring dopamine release in the human brain with PET Volkow, N.D. Brookhaven National Lab., Upton, NY (United ...

  3. Forest View, Illinois: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Forest View, Illinois: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 41.8086431, -87.7933895 Show Map Loading map... "minzoom":false,"mapping...

  4. January 2013 Most Viewed Documents for Biology And Medicine ...

    Office of Scientific and Technical Information (OSTI)

    January 2013 Most Viewed Documents for Biology And Medicine Nevada Test Site Radiological Control Manual Radiological Control Managers' Council Nevada Test Site Effects of ionizing ...

  5. September 2013 Most Viewed Documents for Fission And Nuclear...

    Office of Scientific and Technical Information (OSTI)

    September 2013 Most Viewed Documents for Fission And Nuclear Technologies Estimation of ... Tianfu; Pruess, Karsten (2001) 45 LWR nuclear fuel bundle data for use in fuel bundle ...

  6. June 2015 Most Viewed Documents for Fission And Nuclear Technologies...

    Office of Scientific and Technical Information (OSTI)

    June 2015 Most Viewed Documents for Fission And Nuclear Technologies Estimation of gas ... MIGRATION IN SOILS OF THE CHERNOBYL NUCLEAR POWER PLANT EXCLUSION ZONE Farfan, E ...

  7. Most Viewed Documents for Fission and Nuclear Technologies: December...

    Office of Scientific and Technical Information (OSTI)

    Most Viewed Documents for Fission and Nuclear Technologies: December 2014 Stress analysis ... States)) (1992) 67 Behavior of spent nuclear fuel in water pool storage Johnson, A.B. ...

  8. June 2014 Most Viewed Documents for National Defense | OSTI,...

    Office of Scientific and Technical Information (OSTI)

    June 2014 Most Viewed Documents for National Defense The Effects of Nuclear Weapons ... Vigil, M.G. (1996) 13 Ground-based Nuclear Detonation Detection (GNDD) Technology ...

  9. March 2016 Most Viewed Documents for Fission And Nuclear Technologies...

    Office of Scientific and Technical Information (OSTI)

    March 2016 Most Viewed Documents for Fission And Nuclear Technologies Estimation of gas ... methods and test results utilized for nuclear core applications (LWBR Development ...

  10. December 2015 Most Viewed Documents for Fission And Nuclear Technologi...

    Office of Scientific and Technical Information (OSTI)

    December 2015 Most Viewed Documents for Fission And Nuclear Technologies Estimation of gas ... methods and test results utilized for nuclear core applications (LWBR Development ...

  11. March 2014 Most Viewed Documents for National Defense | OSTI...

    Office of Scientific and Technical Information (OSTI)

    March 2014 Most Viewed Documents for National Defense The Effects of Nuclear Weapons ... States) (1995) 13 The history of nuclear weapon safety devices Plummer, D.W.; ...

  12. A Lidar View of Clouds in Southeastern China

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lidar View of Clouds in Southeastern China For original submission and image(s), see ARM Research Highlights http:www.arm.govsciencehighlights Research Highlight From May 2008...

  13. September 2013 Most Viewed Documents for Energy Storage, Conversion...

    Office of Scientific and Technical Information (OSTI)

    September 2013 Most Viewed Documents for Energy Storage, Conversion, And Utilization Process ... 2010 Toyota Prius Hybrid Synergy Drive System Burress, Timothy A ORNL; Campbell, ...

  14. March 2014 Most Viewed Documents for Energy Storage, Conversion...

    Office of Scientific and Technical Information (OSTI)

    March 2014 Most Viewed Documents for Energy Storage, Conversion, And Utilization Process ... 2007 Toyota Camry Hybrid Syneregy Drive System Burress, T.A.; Coomer, C.L.; Campbell, ...

  15. Most Viewed Documents for Energy Storage, Conversion, and Utilization...

    Office of Scientific and Technical Information (OSTI)

    Most Viewed Documents for Energy Storage, Conversion, and Utilization: December 2014 Process ... 2007 Toyota Camry Hybrid Syneregy Drive System Burress, T.A.; Coomer, C.L.; Campbell, ...

  16. June 2014 Most Viewed Documents for Energy Storage, Conversion...

    Office of Scientific and Technical Information (OSTI)

    June 2014 Most Viewed Documents for Energy Storage, Conversion, And Utilization Process ... 2004 Toyota Prius Hybrid Electric Drive System Staunton, R.H.; Ayers, C.W.; Chiasson, ...

  17. March 2015 Most Viewed Documents for Energy Storage, Conversion...

    Office of Scientific and Technical Information (OSTI)

    March 2015 Most Viewed Documents for Energy Storage, Conversion, And Utilization Process ... 2007 Toyota Camry Hybrid Syneregy Drive System Burress, T.A.; Coomer, C.L.; Campbell, ...

  18. Most Viewed Documents for Energy Storage, Conversion, and Utilization...

    Office of Scientific and Technical Information (OSTI)

    Most Viewed Documents for Energy Storage, Conversion, and Utilization: September 2014 Process ... 2007 Toyota Camry Hybrid Syneregy Drive System Burress, T.A.; Coomer, C.L.; Campbell, ...

  19. BrightView Systems Ltd | Open Energy Information

    Open Energy Info (EERE)

    Ltd Jump to: navigation, search Name: BrightView Systems Ltd Place: Petach-Tikva, Israel Zip: 49510 Product: Has developed an unspecified technology for PV cell manufacture....

  20. The Better Buildings Neighborhood View -- December 2013 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Better Buildings Neighborhood View -- July 2013 Focus Series: Philadelphia Energyworks: In the City of Brotherly Love, Sharing Know-How Leads to Sustainability The Better ...

  1. January 2013 Most Viewed Documents for Materials | OSTI, US Dept...

    Office of Scientific and Technical Information (OSTI)

    January 2013 Most Viewed Documents for Materials Evaluation of the inhibitive effect of some plant extracts on the acid corrosion of mild steel Oguzie, Emeka E. Electrochemistry ...

  2. Residential Windows and Window Coverings: A Detailed View of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Residential Windows and Window Coverings: A Detailed View of the Installed Base and User Behavior SEPTEMBER 2013 Prepared for: Building Technologies Office Office of Energy ...

  3. April 2013 Most Viewed Documents for Power Generation And Distribution...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    April 2013 Most Viewed Documents for Power Generation And Distribution Electric power ... (1998) 64 Molten Salt-Carbon Nanotube Thermal Energy Storage for Concentrating Solar ...

  4. March 2014 Most Viewed Documents for Power Generation And Distribution...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    March 2014 Most Viewed Documents for Power Generation And Distribution ASPEN Plus Simulation ... (1982) 18 Molten Salt-Carbon Nanotube Thermal Energy Storage for Concentrating Solar ...

  5. September 2013 Most Viewed Documents for Power Generation And...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    September 2013 Most Viewed Documents for Power Generation And Distribution Electric power ... (1996) 21 Molten Salt-Carbon Nanotube Thermal Energy Storage for Concentrating Solar ...

  6. Our view: Vaccinate now, prevent flu later

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    scientists can say this because of the model they have constructed. December 24, 2015 Man sneezing Model suggests still time to get your flu shot and be protected. "There's no...

  7. UGE Scheduler Cycle Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    UGE Scheduler Cycle Time UGE Scheduler Cycle Time Genepool Cycle Time Genepool Daily Genepool Weekly Phoebe Cycle Time Phoebe Daily Phoebe Weekly What is the Scheduler Cycle? The...

  8. Better Buildings Network View | July-August 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | July-August 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View July-August 2015 (344.42 KB) More Documents & Publications Better Buildings Network View | May 2015 Better Buildings Network View | June 2015 Better Buildings Network View | April

  9. January 2013 Most Viewed Documents for Mathematics And Computing | OSTI, US

    Office of Scientific and Technical Information (OSTI)

    Dept of Energy Office of Scientific and Technical Information January 2013 Most Viewed Documents for Mathematics And Computing Cybersecurity through Real-Time Distributed Control Systems Kisner, Roger A [ORNL]; Manges, Wayne W [ORNL]; MacIntyre, Lawrence Paul [ORNL]; Nutaro, James J [ORNL]; Munro Jr, John K [ORNL]; Ewing, Paul D [ORNL]; Howlader, Mostofa [ORNL]; Kuruganti, Phani Teja [ORNL]; Wallace, Richard M [ORNL]; Olama, Mohammed M [ORNL] REACTOR ANALYSIS AND VIRTUAL CONTROL ENVIRONMENT

  10. In-Vessel Retention of Molten Corium: Lessons Learned and Outstanding Issues

    SciTech Connect (OSTI)

    J.L. Rempe; K.Y. Suh; F. B. Cheung; S. B. Kim

    2008-03-01

    In-vessel retention (IVR) of core melt is a key severe accident management strategy adopted by some operating nuclear power plants and proposed for some advanced light water reactors (ALWRs). If there were inadequate cooling during a reactor accident, a significant amount of core material could become molten and relocate to the lower head of the reactor vessel, as happened in the Three Mile Island Unit 2 (TMI-2) accident. If it is possible to ensure that the vessel head remains intact so that relocated core materials are retained within the vessel, the enhanced safety associated with these plants can reduce concerns about containment failure and associated risk. For example, the enhanced safety of the Advanced 600 MWe Pressurized Water Reactor (PWR) designed by Westinghouse (AP600), which relied upon External Reactor Vessel Cooling (ERVC) for IVR, resulted in the U.S. Nuclear Regulatory Commission (US NRC) approving the design without requiring certain conventional features common to existing Light Water Reactors (LWRs). However, it is not clear that the ERVC proposed for the AP600 could provide sufficient heat removal for higher-power reactors (up to 1500 MWe) without additional enhancements. This paper reviews efforts made and results reported regarding the enhancement of IVR in LWRs. Where appropriate, the paper identifies what additional data or analyses are needed to demonstrate that there is sufficient margin for successful IVR in high power thermal reactors.

  11. Evaluation of in-vessel corium retention through external reactor vessel cooling for integral reactor

    SciTech Connect (OSTI)

    Park, R. J.; Lee, J. R.; Kim, S. B.; Jin, Y.; Kim, H. Y.

    2012-07-01

    In-vessel corium retention through external reactor vessel cooling (IVR-ERVC) for a small integral reactor has been evaluated to determine the thermal margin for the prevention of a reactor vessel failure. A thermal load analysis from the corium pool to the outer reactor vessel wall in the lower plenum of the reactor vessel has been performed to determine the heat flux distribution. The critical heat flux (CHF) on the outer reactor vessel wall has been determined to fix the maximum heat removal rate through the external coolant between the outer reactor vessel and the insulation of the reactor vessel. Finally, the thermal margin has been evaluated by comparison of the thermal load with the maximum heat removal rate of the CHF on the outer reactor vessel wall. The maximum heat flux from the corium pool to the outer reactor vessel is estimated at approximately 0.25 MW/m{sup 2} in the metallic layer because of the focusing effect. The CHF of the outer reactor vessel is approximately 1.1 MW/m{sup 2} because of a two phase natural circulation mass flow. Since the thermal margin for the IVR-ERVC is sufficient, the reactor vessel integrity is maintained during a severe accident of a small integral reactor. (authors)

  12. In-vessel coolability and retention of a core melt. Volume 2

    SciTech Connect (OSTI)

    Theofanous, T.G.; Liu, C.; Additon, S.; Angelini, S.; Kymaelaeinen, O.; Salmassi, T.

    1996-10-01

    The efficacy of external flooding of a reactor vessel as a severe accident management strategy is assessed for an AP600-like reactor design. The overall approach is based on the Risk Oriented Accident Analysis Methodology (ROAAM), and the assessment includes consideration of bounding scenarios and sensitivity studies, as well as arbitrary parametric evaluations that allow the delineation of the failure boundaries. Quantification of the input parameters is carried out for an AP600-like design, and the results of the assessment demonstrate that lower head failure is physically unreasonable. Use of this conclusion for any specific application is subject to verifying the required reliability of the depressurization and cavity-flooding systems, and to showing the appropriateness (in relation to the database presented here, or by further testing as necessary) of the thermal insulation design and of the external surface properties of the lower head, including any applicable coatings. The AP600 is particularly favorable to in-vessel retention. Some ideas to enhance the assessment basis as well as performance in this respect, for applications to larger and/or higher power density reactors are also provided.

  13. Retention and release of tritium in aluminum clad, Al-Li alloys

    SciTech Connect (OSTI)

    Louthan, M.R. Jr.

    1991-12-31

    Tritium retention in and release from aluminum clad, aluminum-lithium alloys is modeled from experimental and operational data developed during the thirty plus years of tritium production at the Savannah River Site. The model assumes that tritium atoms, formed by the {sup 6}Li(n,{alpha}){sup 3}He reaction, are produced in solid solution in the Al-Li alloy. Because of the low solubility of hydrogen isotopes in aluminum alloys, the irradiated Al-Li rapidly becomes supersaturated in tritium. Newly produced tritium atoms are trapped by lithium atoms to form a lithium tritide. The effective tritium pressure required for trap or tritide stability is the equilibrium decomposition pressure of tritium over a lithium tritide-aluminum mixture. The temperature dependence of tritium release is determined by the permeability of the cladding to tritium and the local equilibrium at the trap sites. This model is used to calculate tritium release from aluminum clad, aluminum-lithium alloys. 9 refs., 3 figs.

  14. Retention and release of tritium in aluminum clad, Al-Li alloys

    SciTech Connect (OSTI)

    Louthan, M.R. Jr.

    1991-01-01

    Tritium retention in and release from aluminum clad, aluminum-lithium alloys is modeled from experimental and operational data developed during the thirty plus years of tritium production at the Savannah River Site. The model assumes that tritium atoms, formed by the {sup 6}Li(n,{alpha}){sup 3}He reaction, are produced in solid solution in the Al-Li alloy. Because of the low solubility of hydrogen isotopes in aluminum alloys, the irradiated Al-Li rapidly becomes supersaturated in tritium. Newly produced tritium atoms are trapped by lithium atoms to form a lithium tritide. The effective tritium pressure required for trap or tritide stability is the equilibrium decomposition pressure of tritium over a lithium tritide-aluminum mixture. The temperature dependence of tritium release is determined by the permeability of the cladding to tritium and the local equilibrium at the trap sites. This model is used to calculate tritium release from aluminum clad, aluminum-lithium alloys. 9 refs., 3 figs.

  15. Effect of morphology of sulfurized materials in the retention of mercury from gas streams

    SciTech Connect (OSTI)

    Guijarro, M.I.; Mendioroz, S.; Munoz, V.

    1998-03-01

    Mercury pollution sources are chloralkali industries, metal sulfide ore smelting, gold refining, cement production, industrial applications of metals, and, especially, fossil fuel combustion and incineration of sewage sludge or municipal garbage. The retention of mercury vapor by sulfur supported on sepiolite has been studied, and the utility of sepiolite as a dispersant for the active phase, sulfur, has been thoroughly ascertained. Samples with 10% S supported on sepiolite of varying size and shape have been prepared from powders sulfurized by reaction/deposit, and their efficiency in depurating air streams with 95 ppm mercury has been tested in a dynamic system using a fixed-bed glass reactor and fluid velocities ranging from 3.1 to 18.9 cm/s. From breakthrough curves under various sets of conditions, the importance of mass transfer under the process conditions has been proven. The progress of the reaction is limited by the resistance to reactant diffusion inside the solid through the layer of product formed. Sulfur reaction to HgS is reduced to an external zone of the solid, giving rise to an egg-shell deposit whose extension is related to sulfur dispersion and porosity of the adsorbent. Then, conversion and capacity of the samples are related to their porosity and S/V ratio. The use of SEM helps to confirm those statements. The 10% S samples compare well with the more conventional S/activated carbon, with their use being advantageous for the low price and abundance of the substrate.

  16. View discovery in OLAP databases through statistical combinatorial optimization

    SciTech Connect (OSTI)

    Hengartner, Nick W; Burke, John; Critchlow, Terence; Joslyn, Cliff; Hogan, Emilie

    2009-01-01

    OnLine Analytical Processing (OLAP) is a relational database technology providing users with rapid access to summary, aggregated views of a single large database, and is widely recognized for knowledge representation and discovery in high-dimensional relational databases. OLAP technologies provide intuitive and graphical access to the massively complex set of possible summary views available in large relational (SQL) structured data repositories. The capability of OLAP database software systems to handle data complexity comes at a high price for analysts, presenting them a combinatorially vast space of views of a relational database. We respond to the need to deploy technologies sufficient to allow users to guide themselves to areas of local structure by casting the space of 'views' of an OLAP database as a combinatorial object of all projections and subsets, and 'view discovery' as an search process over that lattice. We equip the view lattice with statistical information theoretical measures sufficient to support a combinatorial optimization process. We outline 'hop-chaining' as a particular view discovery algorithm over this object, wherein users are guided across a permutation of the dimensions by searching for successive two-dimensional views, pushing seen dimensions into an increasingly large background filter in a 'spiraling' search process. We illustrate this work in the context of data cubes recording summary statistics for radiation portal monitors at US ports.

  17. View Factor Calculation for Three-Dimensional Geometries.

    SciTech Connect (OSTI)

    1989-06-20

    Version 00 MCVIEW calculates the radiation geometric view factor between surfaces for three dimensional geometries with and without interposed third surface obstructions. It was developed to calculate view factors for input data to heat transfer analysis programs such as SCA-03/TRUMP, SCA-01/HEATING-5 and PSR-199/HEATING-6.

  18. May 21, 2012, Office of Health, Safety and Security (HSS) Focus Group Work Force Retention Work Group Charter

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Work Force Retention Work Group Charter In an ongoing effort to further the improvement of health, safety, environmental, and security performance within the Department, DOE is engaged in the establishment of work groups to pursue health and safety improvements across the DOE Complex. These efforts support DOE's responsibility as owner/manager to protect its greatest asset: the worker. The work groups support DOE's integrated safety management system and further DOE's best interests by fostering

  19. Does UV disinfection compromise sutures? An evaluation of tissue response and suture retention in salmon surgically implanted with transmitters

    SciTech Connect (OSTI)

    Walker, Ricardo W.; Brown, Richard S.; Deters, Katherine A.; Eppard, M. B.; Cooke, Steven J.

    2013-10-01

    Ultraviolet radiation (UVR) can be used as a tool to disinfect surgery tools used for implanting transmitters into fish. However, the use of UVR could possibly degrade monofilament suture material used to close surgical incisions. This research examined the effect of UVR on monofilament sutures to determine if they were compromised and negatively influenced tag and suture retention, incision openness, or tissue reaction. Eighty juvenile Chinook salmon Oncorhynchus tshawytscha were surgically implanted with an acoustic transmitter and a passive integrated transponder. The incision was closed with a single stitch of either a suture exposed to 20 doses of UV radiation (5 minute duration per dose) or a new, sterile suture. Fish were then held for 28 d and examined under a microscope at day 7, 14, 21 and 28 for incision openness, ulceration, redness, and the presence of water mold. There was no significant difference between treatments for incision openness, redness, ulceration or the presence of water mold on any examination day. On day 28 post-surgery, there were no lost sutures; however, 2 fish lost their transmitters (one from each treatment). The results of this study do not show any differences in negative influences such as tissue response, suture retention or tag retention between a new sterile suture and a suture disinfected with UVR.

  20. Primordial nucleosynthesis: A cosmological point of view

    SciTech Connect (OSTI)

    Mathews, G. J.; Kusakabe, M.; Cheoun, M.-K.

    2014-05-09

    Primordial nucleosynthesis remains as one of the pillars of modern cosmology. It is the test-ing ground upon which all cosmological models must ultimately rest. It is our only probe of the universe during the first few minutes of cosmic expansion and in particular during the important radiation-dominated epoch. These lectures review the basic equations of space-time, cosmology, and big bang nucleosynthesis. We will then review the current state of observational constraints on primordial abundances along with the key nuclear reactions and their uncertainties. We summarize which nuclear measure-ments are most crucial during the big bang. We also review various cosmological models and their constraints. In particular, we summarize the constraints that big bang nucleosynthesis places upon the possible time variation of fundamental constants, along with constraints on the nature and origin of dark matter and dark energy, long-lived supersymmetric particles, gravity waves, and the primordial magnetic field.

  1. LPG in Latin America: An overall view

    SciTech Connect (OSTI)

    Villaronga, G.J.

    1986-01-01

    Latin America is about 2.2 times the size of the United States and, in population, it exceeds the U.S. by 165 million people. A relatively high population growth rate, together with its vast underdeveloped natural resources, gives Latin America a tremendous potential for progress. The desire of governments to advance economically, together with the proper stimuli to education and to the managerial resources, should translate this potential in reality. This is evident in a number of regions.

  2. Hydrogen Gas Retention and Release from WTP Vessels: Summary of Preliminary Studies

    SciTech Connect (OSTI)

    Gauglitz, Phillip A.; Bontha, Jagannadha R.; Daniel, Richard C.; Mahoney, Lenna A.; Rassat, Scot D.; Wells, Beric E.; Bao, Jie; Boeringa, Gregory K.; Buchmiller, William C.; Burns, Carolyn A.; Chun, Jaehun; Karri, Naveen K.; Li, Huidong; Tran, Diana N.

    2015-07-01

    The Hanford Waste Treatment and Immobilization Plant (WTP) is currently being designed and constructed to pretreat and vitrify a large portion of the waste in the 177 underground waste storage tanks at the Hanford Site. A number of technical issues related to the design of the pretreatment facility (PTF) of the WTP have been identified. These issues must be resolved prior to the U.S. Department of Energy (DOE) Office of River Protection (ORP) reaching a decision to proceed with engineering, procurement, and construction activities for the PTF. One of the issues is Technical Issue T1 - Hydrogen Gas Release from Vessels (hereafter referred to as T1). The focus of T1 is identifying controls for hydrogen release and completing any testing required to close the technical issue. In advance of selecting specific controls for hydrogen gas safety, a number of preliminary technical studies were initiated to support anticipated future testing and to improve the understanding of hydrogen gas generation, retention, and release within PTF vessels. These activities supported the development of a plan defining an overall strategy and approach for addressing T1 and achieving technical endpoints identified for T1. Preliminary studies also supported the development of a test plan for conducting testing and analysis to support closing T1. Both of these plans were developed in advance of selecting specific controls, and in the course of working on T1 it was decided that the testing and analysis identified in the test plan were not immediately needed. However, planning activities and preliminary studies led to significant technical progress in a number of areas. This report summarizes the progress to date from the preliminary technical studies. The technical results in this report should not be used for WTP design or safety and hazards analyses and technical results are marked with the following statement: “Preliminary Technical Results for Planning – Not to be used for WTP Design

  3. DOE - NNSA/NFO -- Photo Library News & Views

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News & Views NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - NTS 50th Anniversary Newsletter (News & Views) This special issue of the NTS News & Views is dedicated to the thousands of men and women at the Nevada National Security Site (NNSS), who for 42 years have provided this Nation with a safe, strong and effective nuclear deterrent. This issue spotlights major events at the NTS from 1951 through 1993. Instructions: Click the photograph THUMBNAIL to

  4. Linear-array ultrasonic waveguide transducer for under sodium viewing.

    SciTech Connect (OSTI)

    Sheen, S. H.; Chien, H. T.; Wang, K.; Lawrence, W. P.; Engel, D.; Nuclear Engineering Division

    2010-09-01

    In this report, we first present the basic design of a low-noise waveguide and its performance followed by a review of the array transducer technology. The report then presents the concept and basic designs of arrayed waveguide transducers that can apply to under-sodium viewing for in-service inspection of fast reactors. Depending on applications, the basic waveguide arrays consist of designs for sideway and downward viewing. For each viewing application, two array geometries, linear and circular, are included in design analysis. Methods to scan a 2-D target using a linear array waveguide transducer are discussed. Future plan to develop a laboratory array waveguide prototype is also presented.

  5. Axial Tomography from Digitized Real Time Radiography

    DOE R&D Accomplishments [OSTI]

    Zolnay, A. S.; McDonald, W. M.; Doupont, P. A.; McKinney, R. L.; Lee, M. M.

    1985-01-18

    Axial tomography from digitized real time radiographs provides a useful tool for industrial radiography and tomography. The components of this system are: x-ray source, image intensifier, video camera, video line extractor and digitizer, data storage and reconstruction computers. With this system it is possible to view a two dimensional x-ray image in real time at each angle of rotation and select the tomography plane of interest by choosing which video line to digitize. The digitization of a video line requires less than a second making data acquisition relatively short. Further improvements on this system are planned and initial results are reported.

  6. Data evaluation technical memorandum on the K-1407C Retention Basin at the Oak Ridge K-25 Site, Oak Ridge, Tennessee. Environmental Restoration Program

    SciTech Connect (OSTI)

    Beal, D.; Bock, J.; Hatmaker, T.; Zolyniak, J.; Goddard, P.; Kucsmas, D.

    1991-10-01

    The K-1407-C Retention Basin was a surface impoundment at the Oak Ridge K-25 Site. The basin was used primarily for storing potassium hydroxide scrubber sludge generated at the K-25 Site. In addition, from 1960 to 1973, metal hydroxide sludges that were removed from the K-1407-B Holding Pond were discharged to the K-1407-C Retention Basin. The sludge in the K-1407-B Pond contained discharge from the K-1420 Decontamination and Uranium Recovery, the K-1501 Steam Plant, the K-1413 Laboratory, and the K-1401 Maintenance Building. Radioactive material is also present in the K-1407-C Retention Basin, probably the result of cleaning and decontamination activities at some of the aforementioned facilities. The discharge of waste materials to K-1407-C was discontinued before November of 1988, and all sludge was removed from the retention basin. Some of the sludge was stored, and the remainder was fixed in concrete. This report is specific to the K-1407-C Retention Basin and includes information pertinent to the evaluation of soil contamination. The focus of this evaluation is the effectiveness of the Phase 1 investigation of the K-1407-C Retention Basin to define site conditions adequately to support decisions regarding appropriate closure alternatives. This includes the physical characterization of the site area and the characterization of the nature and extent of contamination at the site in relation to risk characterization and statistical evaluation.

  7. Data evaluation technical memorandum on the K-1407C Retention Basin at the Oak Ridge K-25 Site, Oak Ridge, Tennessee

    SciTech Connect (OSTI)

    Beal, D.; Bock, J.; Hatmaker, T.; Zolyniak, J.; Goddard, P. ); Kucsmas, D. )

    1991-10-01

    The K-1407-C Retention Basin was a surface impoundment at the Oak Ridge K-25 Site. The basin was used primarily for storing potassium hydroxide scrubber sludge generated at the K-25 Site. In addition, from 1960 to 1973, metal hydroxide sludges that were removed from the K-1407-B Holding Pond were discharged to the K-1407-C Retention Basin. The sludge in the K-1407-B Pond contained discharge from the K-1420 Decontamination and Uranium Recovery, the K-1501 Steam Plant, the K-1413 Laboratory, and the K-1401 Maintenance Building. Radioactive material is also present in the K-1407-C Retention Basin, probably the result of cleaning and decontamination activities at some of the aforementioned facilities. The discharge of waste materials to K-1407-C was discontinued before November of 1988, and all sludge was removed from the retention basin. Some of the sludge was stored, and the remainder was fixed in concrete. This report is specific to the K-1407-C Retention Basin and includes information pertinent to the evaluation of soil contamination. The focus of this evaluation is the effectiveness of the Phase 1 investigation of the K-1407-C Retention Basin to define site conditions adequately to support decisions regarding appropriate closure alternatives. This includes the physical characterization of the site area and the characterization of the nature and extent of contamination at the site in relation to risk characterization and statistical evaluation.

  8. Mountain View Electric Association, Inc- Energy Efficiency Rebates Program

    Broader source: Energy.gov [DOE]

    Mountain View Electric Association, Inc. (MVEA) and Tri-State Generation and Transmission Association Inc., MVEA’s power supplier, offers rebates to MVEA customers who install qualifying energy...

  9. PPPL's "Star Power" video offers compelling view of Laboratory...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Visit http:www.pppl.gov. . Contact Info PPPL Office of Communications Email: PPPLOOC@pppl.gov Phone: 609-243-2755 Download Select and View High Resolution Images to Download ...

  10. Desert View Highlands, California: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Desert View Highlands is a census-designated place in Los Angeles County, California.1...

  11. How can I view submitted materials? | OpenEI Community

    Open Energy Info (EERE)

    Groups Menu You must login in order to post into this group. Recent content Travis Brown and Kamran Baksh, Final Submission For various reasons, you may w... How can I view...

  12. March 2015 Most Viewed Documents for Mathematics And Computing...

    Office of Scientific and Technical Information (OSTI)

    5 Most Viewed Documents for Mathematics And Computing Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 1019 A comparison of ...

  13. June 2014 Most Viewed Documents for Mathematics And Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    June 2014 Most Viewed Documents for Mathematics And Computing Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 337 The Effects ...

  14. The Better Buildings Neighborhood View - Summer 2011 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Summer 2011 The Better Buildings Neighborhood View - Summer 2011 The quarterly update newsletter of the Better Buildings program of the U.S. Department of Energy. PDF icon BB...

  15. West Pleasant View, Colorado: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. West Pleasant View is a census-designated place in Jefferson County, Colorado.1 References...

  16. West View, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. West View is a borough in Allegheny County, Pennsylvania. It falls under Pennsylvania's 4th...

  17. File and Directory Management Tool: view, organize, transfer...

    Office of Scientific and Technical Information (OSTI)

    Title: File and Directory Management Tool: view, organize, transfer files Not Specified Authors: Smith, N. G. ; O'Neill, N. J. ; Spencer, P. N. ; Long, J. W. Publication Date: ...

  18. March 2014 Most Viewed Documents for Engineering | OSTI, US Dept...

    Office of Scientific and Technical Information (OSTI)

    4 Most Viewed Documents for Engineering Damage identification and health monitoring of ... solutions VanSant, J.H. (1980) 46 Laser Engineered Net Shaping (LENS(TM)): A Tool ...

  19. Chevy Chase View, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    is a stub. You can help OpenEI by expanding it. Chevy Chase View is a town in Montgomery County, Maryland. It falls under Maryland's 8th congressional district.12...

  20. March 2015 Most Viewed Documents for Biology And Medicine | OSTI...

    Office of Scientific and Technical Information (OSTI)

    5 Most Viewed Documents for Biology And Medicine Measuring dopamine release in the human brain with PET Volkow, N.D. Brookhaven National Lab., Upton, NY (United States)|State ...

  1. April 2013 Most Viewed Documents for National Defense | OSTI...

    Office of Scientific and Technical Information (OSTI)

    April 2013 Most Viewed Documents for National Defense Vapor-liquid equilibria for nitric acid-water and plutonium nitrate-nitric acid-water solutions Maimoni, A. (1980) 95 SMART ...

  2. September 2015 Most Viewed Documents for Fission And Nuclear...

    Office of Scientific and Technical Information (OSTI)

    September 2015 Most Viewed Documents for Fission And Nuclear Technologies Estimation of ... structures Chen, S.S. (1985) 167 LWR nuclear fuel bundle data for use in fuel bundle ...

  3. March 2015 Most Viewed Documents for Fission And Nuclear Technologies...

    Office of Scientific and Technical Information (OSTI)

    5 Most Viewed Documents for Fission And Nuclear Technologies Stress analysis and ... Maimoni, A. (1980) 101 Behavior of spent nuclear fuel in water pool storage Johnson, A.B. ...

  4. Most Viewed Documents for Fission And Nuclear Technologies: September...

    Office of Scientific and Technical Information (OSTI)

    Most Viewed Documents for Fission And Nuclear Technologies: September 2014 Estimation of ... H.J. (1977) 71 Behavior of spent nuclear fuel in water pool storage Johnson, A.B. ...

  5. March 2014 Most Viewed Documents for Fission And Nuclear Technologies...

    Office of Scientific and Technical Information (OSTI)

    4 Most Viewed Documents for Fission And Nuclear Technologies Behavior of spent nuclear fuel in water pool storage Johnson, A.B. Jr. (1977) 72 Peer-review study of the draft ...

  6. July 2013 Most Viewed Documents for Fission And Nuclear Technologies...

    Office of Scientific and Technical Information (OSTI)

    July 2013 Most Viewed Documents for Fission And Nuclear Technologies Estimation of gas ... Ho, F.H. (1988) 136 Behavior of spent nuclear fuel in water pool storage Johnson, A.B. ...

  7. June 2014 Most Viewed Documents for Fission And Nuclear Technologies...

    Office of Scientific and Technical Information (OSTI)

    June 2014 Most Viewed Documents for Fission And Nuclear Technologies Behavior of spent nuclear fuel in water pool storage Johnson, A.B. Jr. (1977) 78 Estimation of gas leak rates ...

  8. April 2013 Most Viewed Documents for Fission And Nuclear Technologies...

    Office of Scientific and Technical Information (OSTI)

    April 2013 Most Viewed Documents for Fission And Nuclear Technologies Behavior of spent nuclear fuel in water pool storage Johnson, A.B. Jr. (null) 298 Estimation of gas leak rates ...

  9. Modular Ocean Instrumentation System (MOIS) LabVIEW Software

    SciTech Connect (OSTI)

    Nelson, Eric

    2015-12-03

    Software developed in LabVIEW for the Modular Ocean Instrumentation System is provided. Two documents: MOIS User's Guide and MOIS Software Developer's Guide are included in the submission.

  10. Optical fiber head for providing lateral viewing

    DOE Patents [OSTI]

    Everett, Matthew J.; Colston, Billy W.; James, Dale L.; Brown, Steve; Da Silva, Luiz

    2002-01-01

    The head of an optical fiber comprising the sensing probe of an optical heterodyne sensing device includes a planar surface that intersects the perpendicular to axial centerline of the fiber at a polishing angle .theta.. The planar surface is coated with a reflective material so that light traveling axially through the fiber is reflected transverse to the fiber's axial centerline, and is emitted laterally through the side of the fiber. Alternatively, the planar surface can be left uncoated. The polishing angle .theta. must be no greater than 39.degree. or must be at least 51.degree.. The emitted light is reflected from adjacent biological tissue, collected by the head, and then processed to provide real-time images of the tissue. The method for forming the planar surface includes shearing the end of the optical fiber and applying the reflective material before removing the buffer that circumscribes the cladding and the core.

  11. ALS Technique Gives Novel View of Lithium Battery Dendrite Growth

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Technique Gives Novel View of Lithium Battery Dendrite Growth ALS Technique Gives Novel View of Lithium Battery Dendrite Growth Print Thursday, 24 April 2014 09:46 Lithium-ion batteries, popular in today's electronic devices and electric vehicles, could gain significant energy density if their graphite anodes were replaced with lithium metal anodes. But there's a major concern with substituting lithium-when the battery cycles, microscopic fibers of the lithium anodes ("dendrites")

  12. BloombergBusiness: Viewed from space: less corn

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Viewed from space: less corn Viewed from space: less corn U.S. corn production is 2.8 percent smaller than government estimates, according to a daily analysis of infrared satellite images taken of more than 1 million corn fields. September 13, 2015 Domestic corn production will be 13.34 billion bushels, Descartes Labs forecast. Source: Descartes Labs via Bloomberg Domestic corn production will be 13.34 billion bushels, Descartes Labs forecast. Source: Descartes Labs via Bloomberg Corn crop

  13. New ALS Technique Gives Nanoscale Views of Complex Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New ALS Technique Gives Nanoscale Views of Complex Systems New ALS Technique Gives Nanoscale Views of Complex Systems Print Wednesday, 28 May 2014 00:00 Studying and identifying molecules at the mesoscale has always been challenging-even the best microscopes and spectrometers have difficulty simultaneously identifying and spatially resolving this realm of matter, which ranges from about 10 to 1000 nanometers in size. But ALS researchers recently developed a broadband imaging technique that looks

  14. View from the Bridge: Commercial Vehicle Perspective | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    View from the Bridge: Commercial Vehicle Perspective View from the Bridge: Commercial Vehicle Perspective Truck manufacturer's perspective on technologies to achieve truck propulsion system efficiency gains deer12_greszler.pdf (2.78 MB) More Documents & Publications Roadmap and Technical White Papers for 21st Century Truck Partnership Overview of the DOE High Efficiency Engine Technologies R&D WORKSHOP REPORT: Trucks and Heavy-Duty Vehicles Technical Requirements and Gaps for Lightweight

  15. CHARACTERIZATION OF PHASE AND EMULSION BEHAVIOR, SURFACTANT RETENTION, AND OIL RECOVERY FOR NOVEL ALCOHOL ETHOXYCARBOXYLATE SURFACTANTS

    SciTech Connect (OSTI)

    Lebone T. Moeti; Ramanathan Sampath

    2001-09-28

    This final technical report describes work performed under DOE Grant No. DE-FG26-97FT97278 during the period October 01, 1997 to August 31, 2001 which covers the total performance period of the project. During this period, detailed information on optimal salinity, temperature, emulsion morphologies, effectiveness for surfactant retention and oil recovery was obtained for an Alcohol Ethoxycarboxylate (AEC) surfactant to evaluate its performance in flooding processes. Tests were conducted on several AEC surfactants and NEODOX (23-4) was identified as the most suitable hybrid surfactant that yielded the best proportion in volume for top, middle, and bottom phases when mixed with oil and water. Following the selection of this surfactant, temperature and salinity scans were performed to identify the optimal salinity and temperature, and the temperature and salinity intervals in which all three phases coexisted. NEODOX 23-4 formed three phases between 4 and 52.5 C. It formed an aqueous rich microemulsion phase at high temperatures and an oleic rich microemulsion phase at low temperatures--a characteristic of the ionic part of the surfactant. The morphology measurement system was set-up successfully at CAU. The best oil/water/surfactant system defined by the above phase work was then studied for emulsion morphologies. Electrical conductivities were measured for middle and bottom phases of the NEODOX 23-4/dodecane/10mM water system and by mixing measured volumes of the middle phase into a fixed volume of the bottom phase and vice versa at room temperature. Electrical conductivity of the mixture decreased as the fraction of volume of the middle phase was increased and vice versa. Also inversion phenomena was observed. These experiments were then repeated for bottom/middle (B/M) and middle/bottom (M/B) conjugate pair phases at 10, 15, 25, 30, 35, 40, and 45 C. Electrical conductivity measurements were then compared with the predictions of the conductivity model developed in

  16. GPU-accelerated regularized iterative reconstruction for few-view cone beam CT

    SciTech Connect (OSTI)

    Matenine, Dmitri; Goussard, Yves

    2015-04-15

    Purpose: The present work proposes an iterative reconstruction technique designed for x-ray transmission computed tomography (CT). The main objective is to provide a model-based solution to the cone-beam CT reconstruction problem, yielding accurate low-dose images via few-views acquisitions in clinically acceptable time frames. Methods: The proposed technique combines a modified ordered subsets convex (OSC) algorithm and the total variation minimization (TV) regularization technique and is called OSC-TV. The number of subsets of each OSC iteration follows a reduction pattern in order to ensure the best performance of the regularization method. Considering the high computational cost of the algorithm, it is implemented on a graphics processing unit, using parallelization to accelerate computations. Results: The reconstructions were performed on computer-simulated as well as human pelvic cone-beam CT projection data and image quality was assessed. In terms of convergence and image quality, OSC-TV performs well in reconstruction of low-dose cone-beam CT data obtained via a few-view acquisition protocol. It compares favorably to the few-view TV-regularized projections onto convex sets (POCS-TV) algorithm. It also appears to be a viable alternative to full-dataset filtered backprojection. Execution times are of 1–2 min and are compatible with the typical clinical workflow for nonreal-time applications. Conclusions: Considering the image quality and execution times, this method may be useful for reconstruction of low-dose clinical acquisitions. It may be of particular benefit to patients who undergo multiple acquisitions by reducing the overall imaging radiation dose and associated risks.

  17. Quantifying groundwater travel time near managed recharge operations using 35S as an intrinsic tracer

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Urióstegui, Stephanie H.; Bibby, Richard K.; Esser, Bradley K.; Clark, Jordan F.

    2016-04-23

    By identifying groundwater retention times near managed aquifer recharge (MAR) facilities is a high priority for managing water quality, especially for operations that incorporate recycled wastewater. In order to protect public health, California guidelines for Groundwater Replenishment Reuse Projects require a minimum 2–6 month subsurface retention time for recycled water depending on the level of disinfection, which highlights the importance of quantifying groundwater travel times on short time scales. This study developed and evaluated a new intrinsic tracer method using the naturally occurring radioisotope sulfur-35 (35S). The 87.5 day half-life of 35S is ideal for investigating groundwater travel times onmore » the <1 year timescale of interest to MAR managers. Natural concentrations of 35S found in water as dissolved sulfate (35SO4) were measured in source waters and groundwater at the Rio Hondo Spreading Grounds in Los Angeles County, CA, and Orange County Groundwater Recharge Facilities in Orange County, CA. 35SO4 travel times are comparable to travel times determined by well-established deliberate tracer studies. The study also revealed that 35SO4 in MAR source water can vary seasonally and therefore careful characterization of 35SO4 is needed to accurately quantify groundwater travel time. But, more data is needed to fully assess whether or not this tracer could become a valuable tool for managers.« less

  18. Results of Large-Scale Testing on Effects of Anti-Foam Agent on Gas Retention and Release

    SciTech Connect (OSTI)

    Stewart, Charles W.; Guzman-Leong, Consuelo E.; Arm, Stuart T.; Butcher, Mark G.; Golovich, Elizabeth C.; Jagoda, Lynette K.; Park, Walter R.; Slaugh, Ryan W.; Su, Yin-Fong; Wend, Christopher F.; Mahoney, Lenna A.; Alzheimer, James M.; Bailey, Jeffrey A.; Cooley, Scott K.; Hurley, David E.; Johnson, Christian D.; Reid, Larry D.; Smith, Harry D.; Wells, Beric E.; Yokuda, Satoru T.

    2008-01-03

    The U.S. Department of Energy (DOE) Office of River Protections Waste Treatment Plant (WTP) will process and treat radioactive waste that is stored in tanks at the Hanford Site. The waste treatment process in the pretreatment facility will mix both Newtonian and non-Newtonian slurries in large process tanks. Process vessels mixing non-Newtonian slurries will use pulse jet mixers (PJMs), air sparging, and recirculation pumps. An anti-foam agent (AFA) will be added to the process streams to prevent surface foaming, but may also increase gas holdup and retention within the slurry. The work described in this report addresses gas retention and release in simulants with AFA through testing and analytical studies. Gas holdup and release tests were conducted in a 1/4-scale replica of the lag storage vessel operated in the Pacific Northwest National Laboratory (PNNL) Applied Process Engineering Laboratory using a kaolin/bentonite clay and AZ-101 HLW chemical simulant with non-Newtonian rheological properties representative of actual waste slurries. Additional tests were performed in a small-scale mixing vessel in the PNNL Physical Sciences Building using liquids and slurries representing major components of typical WTP waste streams. Analytical studies were directed at discovering how the effect of AFA might depend on gas composition and predicting the effect of AFA on gas retention and release in the full-scale plant, including the effects of mass transfer to the sparge air. The work at PNNL was part of a larger program that included tests conducted at Savannah River National Laboratory (SRNL) that is being reported separately. SRNL conducted gas holdup tests in a small-scale mixing vessel using the AZ-101 high-level waste (HLW) chemical simulant to investigate the effects of different AFAs, their components, and of adding noble metals. Full-scale, single-sparger mass transfer tests were also conducted at SRNL in water and AZ-101 HLW simulant to provide data for PNNL

  19. Daylight Savings Time Starts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Daylight Savings Time Starts Daylight Savings Time Starts WHEN: Mar 08, 2015 3:00 AM - 11:59 PM WHERE: World Time Zones CATEGORY: Holiday INTERNAL: Calendar Login Daylight Savings...

  20. Differing professional views or opinions: 1994 Special Review Panel

    SciTech Connect (OSTI)

    1996-09-01

    In July 1994, the Executive Director for Operations of the US Nuclear Regulatory Commission (NRC) appointed a Special Review Panel to assess the Differing Professional View or Opinion (DPV/DPO) process, including its effectiveness, how well it is understood by employees, and the organizational climate for having such views aired and properly decided. An additional area within this review was to address the effectiveness of the DPO procedures as they pertain to public access and confidentiality. Further, the Panel was charged with the review of the submittals completed since the last review to identify employees who made significant contributions to the agency or to the public health and safety but had not been adequately recognized for this contribution. The report presents the Special Review Panel`s evaluation of the NRC`s current process for dealing with Differing Professional Views or Opinions. Provided in this report are the results of an employee opinion survey on the process; highlights and suggestions from interviews with individuals who had submitted a Differing Professional View or Opinion, as well as with agency managers directly involved with the Differing Professional Views or Opinions process; and the Special Review Panel`s recommendations for improving the DPV/DPO process.

  1. UGE Scheduler Cycle Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    UGE Scheduler Cycle Time UGE Scheduler Cycle Time Genepool Cycle Time Genepool Scheduler Cycle Time Genepool Jobs Dispatched / Hour What is the Scheduler Cycle? The Univa Grid Engine Scheduler cycle performs a number of important tasks, including: Prioritizing Jobs Reserving Resources for jobs requesting more resources (slots / memory) Dispatching jobs or tasks to the compute nodes Evaluating job dependencies The "cycle time" is the length of time it takes the scheduler to complete all

  2. V-195: RSA Authentication Manager Lets Local Users View the Administra...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5: RSA Authentication Manager Lets Local Users View the Administrative Account Password V-195: RSA Authentication Manager Lets Local Users View the Administrative Account Password...

  3. Transport mechanisms acting in toroidal devices: A theoretician`s view

    SciTech Connect (OSTI)

    Carreras, B.A.

    1993-01-01

    Understanding the basic mechanisms of transport in toroidal confinement devices remains one of the more challenging scientific issues in magnetic confinement. At the same time, it is a critical issue for the magnetic fusion program. Recent progress in understanding fluctuations and transport has been fostered by the development and use of new diagnostics, bringing new perspectives on these studies. This has stimulated new theoretical developments. A view of the most recent issues and progress in this area is given. The role of long wavelengths in core transport and the relation between shear flows and turbulence at the plasma edge are the primary topics considered.

  4. January 2013 Most Viewed Documents for Physics | OSTI, US Dept of Energy

    Office of Scientific and Technical Information (OSTI)

    Office of Scientific and Technical Information January 2013 Most Viewed Documents for Physics Dynamic Time Expansion and Compression Using Nonlinear Waveguides Findikoglu, Alp T.; Hahn, Sangkoo F.; Jia, Quanxi Atmospheric PSF Interpolation for Weak Lensing in Short Exposure Imaging Data Chang, C.; Marshall, P.J.; Jernigan, J.G.; Peterson, J.R.; Kahn, S.M.; Gull, S.F.; AlSayyad, Y.; Ahmad, Z.; Bankert, J.; Bard, D.; Connolly, A.; Gibson, R.R.; Gilmore, K.; Grace, E.; Hannel, M.; Hodge, M.A.;

  5. the Y-12 Times, March 2010

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 March 2010 www.y12.doe.gov/news/times.php P.O. Box 2009 Oak Ridge, TN 37831-8245 W H A T ' S I N S I D E Page 2 Y-12's nuclear forensics role Page 3 First Y-12 demolition funded by ARRA Page 4 Bird's-eye view enhances security Page 6 Y-12 UW campaign has best year ever Page 6 Turn your bright idea into a patent B&W Technical Services Y-12, LLC, a partnership between Babcock & Wilcox Technical Services Group Inc. and Bechtel National Inc., operates the Y-12 National Security Complex. A

  6. TECHNETIUM RETENTION IN WTP LAW GLASS WITH RECYCLE FLOW-SHEET DM10 MELTER TESTING VSL-12R2640-1 REV 0

    SciTech Connect (OSTI)

    Abramowitz, Howard; Brandys, Marek; Cecil, Richard; D'Angelo, Nicholas; Matlack, Keith S.; Muller, Isabelle S.; Pegg, Ian L.; Callow, Richard A.; Joseph, Innocent

    2012-12-11

    Melter tests were conducted to determine the retention of technetium and other volatiles in glass while processing simulated Low Activity Waste (LAW) streams through a DM10 melter equipped with a prototypical off-gas system that concentrates and recycles fluid effiuents back to the melter feed. To support these tests, an existing DM10 system installed at Vitreous State Laboratory (VSL) was modified to add the required recycle loop. Based on the Hanford Tank Waste Treatment and Immobilization Plant (WTP) LAW off-gas system design, suitably scaled versions of the Submerged Bed Scrubber (SBS), Wet Electrostatic Precipitator (WESP), and TLP vacuum evaporator were designed, built, and installed into the DM10 system. Process modeling was used to support this design effort and to ensure that issues associated with the short half life of the {sup 99m}Tc radioisotope that was used in this work were properly addressed and that the system would be capable of meeting the test objectives. In particular, this required that the overall time constant for the system was sufficiently short that a reasonable approach to steady state could be achieved before the {sup 99m}Tc activity dropped below the analytical limits of detection. The conceptual design, detailed design, flow sheet development, process model development, Piping and Instrumentation Diagram (P&ID) development, control system design, software design and development, system fabrication, installation, procedure development, operator training, and Test Plan development for the new system were all conducted during this project. The new system was commissioned and subjected to a series of shake-down tests before embarking on the planned test program. Various system performance issues that arose during testing were addressed through a series of modifications in order to improve the performance and reliability of the system. The resulting system provided a robust and reliable platform to address the test objectives.

  7. Partial growth plate closure: apex view on bone scan

    SciTech Connect (OSTI)

    Howman-Giles, R.; Trochei, M.; Yeates, K.; Middleton, R.; Barrett, I.; Scougall, J.; Whiteway, D.

    1985-01-01

    A new technique of using /sup 99m/Tc bone scan to assess partial closure of the growth plate is described. The site and degree of osseous fusion can be obtained by using the apex view. The technique has the potential of assessing serially the growth of a plate before and after surgery.

  8. The Y-12 Times

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Gail Powell Elaine Ruth Ray Smith Donna Watson Lisa Xiques times times the B&W Technical Services Y-12, LLC, a partnership between Babcock & Wilcox Technical Services Group Inc. ...

  9. Time-Resolved

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and time) three correspond to the three broad categories of synchrotron experimental measurement techniques: spectroscopy (energy), scattering (momentum), and imaging...

  10. Time-stretch microscopy based on time-wavelength sequence reconstruction from wideband incoherent source

    SciTech Connect (OSTI)

    Zhang, Chi Xu, Yiqing; Wei, Xiaoming; Tsia, Kevin K.; Wong, Kenneth K. Y.

    2014-07-28

    Time-stretch microscopy has emerged as an ultrafast optical imaging concept offering the unprecedented combination of the imaging speed and sensitivity. However, dedicated wideband and coherence optical pulse source with high shot-to-shot stability has been mandated for time-wavelength mappingthe enabling process for ultrahigh speed wavelength-encoded image retrieval. From the practical point of view, exploiting methods to relax the stringent requirements (e.g., temporal stability and coherence) for the source of time-stretch microscopy is thus of great value. In this paper, we demonstrated time-stretch microscopy by reconstructing the time-wavelength mapping sequence from a wideband incoherent source. Utilizing the time-lens focusing mechanism mediated by a narrow-band pulse source, this approach allows generation of a wideband incoherent source, with the spectral efficiency enhanced by a factor of 18. As a proof-of-principle demonstration, time-stretch imaging with the scan rate as high as MHz and diffraction-limited resolution is achieved based on the wideband incoherent source. We note that the concept of time-wavelength sequence reconstruction from wideband incoherent source can also be generalized to any high-speed optical real-time measurements, where wavelength is acted as the information carrier.

  11. A model-independent view of the mature organization

    SciTech Connect (OSTI)

    Hanna, M.; Langston, D.

    1996-12-31

    Over the last 10 years, industry has been dealing with the issues of process and organizational maturity. This focus on process is driven by the success that manufacturing organizations have had implementing the management principles of W. Edwards Deming and Joseph M. Juran. The organizational-maturity focus is driven by organizations striving to be ISO 9000 compliant or to achieve a specific level on one of the maturity models. Unfortunately, each of the models takes a specific view into what is a very broad arena. That is to say, each model addresses only a specific subset of the characteristics of maturity. This paper attempts to extend beyond these specific views to answer the general question, What is a mature organization and its relationship to Quantitative management and statistical process control?

  12. Managing high-bandwidth real-time data storage

    SciTech Connect (OSTI)

    Bigelow, David D.; Brandt, Scott A; Bent, John M; Chen, Hsing-Bung

    2009-09-23

    There exist certain systems which generate real-time data at high bandwidth, but do not necessarily require the long-term retention of that data in normal conditions. In some cases, the data may not actually be useful, and in others, there may be too much data to permanently retain in long-term storage whether it is useful or not. However, certain portions of the data may be identified as being vitally important from time to time, and must therefore be retained for further analysis or permanent storage without interrupting the ongoing collection of new data. We have developed a system, Mahanaxar, intended to address this problem. It provides quality of service guarantees for incoming real-time data streams and simultaneous access to already-recorded data on a best-effort basis utilizing any spare bandwidth. It has built in mechanisms for reliability and indexing, can scale upwards to meet increasing bandwidth requirements, and handles both small and large data elements equally well. We will show that a prototype version of this system provides better performance than a flat file (traditional filesystem) based version, particularly with regard to quality of service guarantees and hard real-time requirements.

  13. New ALS Technique Gives Nanoscale Views of Complex Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Technique Gives Nanoscale Views of Complex Systems Print Studying and identifying molecules at the mesoscale has always been challenging-even the best microscopes and spectrometers have difficulty simultaneously identifying and spatially resolving this realm of matter, which ranges from about 10 to 1000 nanometers in size. But ALS researchers recently developed a broadband imaging technique that looks inside the mesoscale realm with unprecedented sensitivity and range. The new technique,

  14. New ALS Technique Gives Nanoscale Views of Complex Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New ALS Technique Gives Nanoscale Views of Complex Systems Print Studying and identifying molecules at the mesoscale has always been challenging-even the best microscopes and spectrometers have difficulty simultaneously identifying and spatially resolving this realm of matter, which ranges from about 10 to 1000 nanometers in size. But ALS researchers recently developed a broadband imaging technique that looks inside the mesoscale realm with unprecedented sensitivity and range. The new technique,

  15. September 2013 Most Viewed Documents for Energy Storage, Conversion, And

    Office of Scientific and Technical Information (OSTI)

    Utilization | OSTI, US Dept of Energy Office of Scientific and Technical Information September 2013 Most Viewed Documents for Energy Storage, Conversion, And Utilization Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 169 Evaluation of the 2010 Toyota Prius Hybrid Synergy Drive System Burress, Timothy A [ORNL]; Campbell, Steven L [ORNL]; Coomer, Chester [ORNL]; Ayers, Curtis William [ORNL]; Wereszczak, Andrew A [ORNL]; Cunningham, Joseph

  16. September 2013 Most Viewed Documents for Fission And Nuclear Technologies |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information September 2013 Most Viewed Documents for Fission And Nuclear Technologies Estimation of gas leak rates through very small orifices and channels. [From sealed PuO/sub 2/ containers under accident conditions] Bomelburg, H.J. (1977) 133 Stress analysis and evaluation of a rectangular pressure vessel. [For equipment for sampling Hanford tank radwaste] Rezvani, M.A.; Ziada, H.H. (Westinghouse Hanford Co., Richland, WA (United

  17. September 2013 Most Viewed Documents for Mathematics And Computing | OSTI,

    Office of Scientific and Technical Information (OSTI)

    US Dept of Energy Office of Scientific and Technical Information September 2013 Most Viewed Documents for Mathematics And Computing Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 169 Lecture notes for introduction to safety and health Biele, F. (1992) 57 A comparison of risk assessment techniques from qualitative to quantitative Altenbach, T.J. (1995) 50 Computational procedures for determining parameters in Ramberg-Osgood elastoplastic

  18. September 2013 Most Viewed Documents for Renewable Energy Sources | OSTI,

    Office of Scientific and Technical Information (OSTI)

    US Dept of Energy Office of Scientific and Technical Information September 2013 Most Viewed Documents for Renewable Energy Sources Chapter 11. Heat Exchangers Rafferty, Kevin D.; Culver, Gene (1998) 362 Wet cooling towers: rule-of-thumb design and simulation Leeper, S.A. (1981) 103 Chapter 17. Engineering cost analysis Higbee, Charles V. (1998) 79 Advanced Electric Submersible Pump Design Tool for Geothermal Applications Xuele Qi; Norman Turnquist; Farshad Ghasripoor (2012) 79 A study of

  19. September 2015 Most Viewed Documents for Energy Storage, Conversion, And

    Office of Scientific and Technical Information (OSTI)

    Utilization | OSTI, US Dept of Energy Office of Scientific and Technical Information September 2015 Most Viewed Documents for Energy Storage, Conversion, And Utilization Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 1049 Separation of heavy metals: Removal from industrial wastewaters and contaminated soil Peters, R.W.; Shem, L. (1993) 285 An Improved Method of Manufacturing Corrugated Boxes: Lateral Corrugator Frank C. Murray Ph.D.; ,

  20. September 2015 Most Viewed Documents for Environmental Sciences | OSTI, US

    Office of Scientific and Technical Information (OSTI)

    Dept of Energy Office of Scientific and Technical Information September 2015 Most Viewed Documents for Environmental Sciences Separation of heavy metals: Removal from industrial wastewaters and contaminated soil Peters, R.W.; Shem, L. (1993) 285 Statistical methods for environmental pollution monitoring Gilbert, R.O. (1987) 126 Building a secondary containment system Broder, M.F. (1994) 121 Study of using oxygen-enriched combustion air for locomotive diesel engines Poola, R.B.; Sekar, R.

  1. September 2015 Most Viewed Documents for Fission And Nuclear Technologies |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information September 2015 Most Viewed Documents for Fission And Nuclear Technologies Estimation of gas leak rates through very small orifices and channels. [From sealed PuO/sub 2/ containers under accident conditions] Bomelburg, H.J. (1977) 444 System Definition and Analysis: Power Plant Design and Layout NONE (1996) 273 Stress analysis and evaluation of a rectangular pressure vessel. [For equipment for sampling Hanford tank

  2. September 2015 Most Viewed Documents for Mathematics And Computing | OSTI,

    Office of Scientific and Technical Information (OSTI)

    US Dept of Energy Office of Scientific and Technical Information September 2015 Most Viewed Documents for Mathematics And Computing Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 1049 Lecture notes for introduction to safety and health Biele, F. (1992) 333 A comparison of risk assessment techniques from qualitative to quantitative Altenbach, T.J. (1995) 286 Ferrite Measurement in Austenitic and Duplex Stainless Steel Castings -

  3. September 2015 Most Viewed Documents for Renewable Energy Sources | OSTI,

    Office of Scientific and Technical Information (OSTI)

    US Dept of Energy Office of Scientific and Technical Information September 2015 Most Viewed Documents for Renewable Energy Sources Calculation of brine properties. [Above 80/sup 0/F and for salt content between 5 and 25%] Dittman, G.L. (1977) 257 Aerodynamic characteristics of seven symmetrical airfoil sections through 180-degree angle of attack for use in aerodynamic analysis of vertical axis wind turbines Sheldahl, R E; Klimas, P C (1981) 217 Thermal conductivity of aqueous NaCl solutions

  4. New ALS Technique Gives Nanoscale Views of Complex Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New ALS Technique Gives Nanoscale Views of Complex Systems Print Studying and identifying molecules at the mesoscale has always been challenging-even the best microscopes and spectrometers have difficulty simultaneously identifying and spatially resolving this realm of matter, which ranges from about 10 to 1000 nanometers in size. But ALS researchers recently developed a broadband imaging technique that looks inside the mesoscale realm with unprecedented sensitivity and range. The new technique,

  5. New ALS Technique Gives Nanoscale Views of Complex Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New ALS Technique Gives Nanoscale Views of Complex Systems Print Studying and identifying molecules at the mesoscale has always been challenging-even the best microscopes and spectrometers have difficulty simultaneously identifying and spatially resolving this realm of matter, which ranges from about 10 to 1000 nanometers in size. But ALS researchers recently developed a broadband imaging technique that looks inside the mesoscale realm with unprecedented sensitivity and range. The new technique,

  6. New ALS Technique Gives Nanoscale Views of Complex Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New ALS Technique Gives Nanoscale Views of Complex Systems Print Studying and identifying molecules at the mesoscale has always been challenging-even the best microscopes and spectrometers have difficulty simultaneously identifying and spatially resolving this realm of matter, which ranges from about 10 to 1000 nanometers in size. But ALS researchers recently developed a broadband imaging technique that looks inside the mesoscale realm with unprecedented sensitivity and range. The new technique,

  7. New ALS Technique Gives Nanoscale Views of Complex Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New ALS Technique Gives Nanoscale Views of Complex Systems Print Studying and identifying molecules at the mesoscale has always been challenging-even the best microscopes and spectrometers have difficulty simultaneously identifying and spatially resolving this realm of matter, which ranges from about 10 to 1000 nanometers in size. But ALS researchers recently developed a broadband imaging technique that looks inside the mesoscale realm with unprecedented sensitivity and range. The new technique,

  8. ALS Technique Gives Novel View of Lithium Battery Dendrite Growth

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Technique Gives Novel View of Lithium Battery Dendrite Growth Print Lithium-ion batteries, popular in today's electronic devices and electric vehicles, could gain significant energy density if their graphite anodes were replaced with lithium metal anodes. But there's a major concern with substituting lithium-when the battery cycles, microscopic fibers of the lithium anodes ("dendrites") form on the surface of the lithium electrode and spread across the electrolyte until they reach

  9. December 2015 Most Viewed Documents for Energy Storage, Conversion, And

    Office of Scientific and Technical Information (OSTI)

    Utilization | OSTI, US Dept of Energy Office of Scientific and Technical Information December 2015 Most Viewed Documents for Energy Storage, Conversion, And Utilization Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 1446 Separation of heavy metals: Removal from industrial wastewaters and contaminated soil Peters, R.W.; Shem, L. (1993) 452 Automotive vehicle sensors Sheen, S.H.; Raptis, A.C.; Moscynski, M.J. (1995) 373 An Improved Method

  10. December 2015 Most Viewed Documents for Environmental Sciences | OSTI, US

    Office of Scientific and Technical Information (OSTI)

    Dept of Energy Office of Scientific and Technical Information December 2015 Most Viewed Documents for Environmental Sciences Separation of heavy metals: Removal from industrial wastewaters and contaminated soil Peters, R.W.; Shem, L. (1993) 452 Building a secondary containment system Broder, M.F. (1994) 171 Statistical methods for environmental pollution monitoring Gilbert, R.O. (1987) 116 Ammonia usage in vapor compression for refrigeration and air-conditioning in the United States

  11. December 2015 Most Viewed Documents for Fission And Nuclear Technologies |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information December 2015 Most Viewed Documents for Fission And Nuclear Technologies Estimation of gas leak rates through very small orifices and channels. [From sealed PuO/sub 2/ containers under accident conditions] Bomelburg, H.J. (1977) 432 System Definition and Analysis: Power Plant Design and Layout NONE (1996) 323 Stress analysis and evaluation of a rectangular pressure vessel. [For equipment for sampling Hanford tank

  12. January 2013 Most Viewed Documents for Energy Storage, Conversion, And

    Office of Scientific and Technical Information (OSTI)

    Utilization | OSTI, US Dept of Energy Office of Scientific and Technical Information January 2013 Most Viewed Documents for Energy Storage, Conversion, And Utilization Energy Technology Perspectives 2012: Executive Summary [Portuguese version] NONE Energy indicators for electricity production : comparing technologies and the nature of the indicators Energy Payback Ratio (EPR), Net Energy Ratio (NER) and Cumulative Energy Demand (CED). [Oestfoldforskning AS] Raadal, Hanne Lerche [Ostfold

  13. January 2013 Most Viewed Documents for Environmental Sciences | OSTI, US

    Office of Scientific and Technical Information (OSTI)

    Dept of Energy Office of Scientific and Technical Information January 2013 Most Viewed Documents for Environmental Sciences Horizontal Advanced Tensiometer Hubbell, Joel M.; Sisson, James B. 2 micron LIDAR for laser-based remote sensing: Flight demonstration and application survey Wagener, T.J.; Demma, N.; Kmetec, J.D.; Kubo, T.S. [Honeywell Technology Cent, Bloomington, MN (United States)] Streamflow and selected precipitation data for Yucca Mountain and vicinity, Nye County, Nevada, water

  14. January 2013 Most Viewed Documents for Power Generation And Distribution |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information January 2013 Most Viewed Documents for Power Generation And Distribution Lessons from Large-Scale Renewable Energy Integration Studies: Preprint Bird, L.; Milligan, M. Small punch creep test: A promising methodology for high temperature plant components life evaluation Tettamanti, S. [CISE SpA, Milan (Italy)]; Crudeli, R. [ENEL SpA, Milan (Italy)] Failure analyses and weld repair of boiler feed water pumps Vulpen, R. van

  15. June 2014 Most Viewed Documents for Energy Storage, Conversion, And

    Office of Scientific and Technical Information (OSTI)

    Utilization | OSTI, US Dept of Energy Office of Scientific and Technical Information June 2014 Most Viewed Documents for Energy Storage, Conversion, And Utilization Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 337 Seventh Edition Fuel Cell Handbook NETL (2004) 118 Energy Saving Potentials and Air Quality Benefits of Urban HeatIslandMitigation Akbari, Hashem (2005) 76 Evaluation of 2004 Toyota Prius Hybrid Electric Drive System

  16. June 2015 Most Viewed Documents for Energy Storage, Conversion, And

    Office of Scientific and Technical Information (OSTI)

    Utilization | OSTI, US Dept of Energy Office of Scientific and Technical Information June 2015 Most Viewed Documents for Energy Storage, Conversion, And Utilization Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 833 Separation of heavy metals: Removal from industrial wastewaters and contaminated soil Peters, R.W.; Shem, L. (1993) 234 An Improved Method of Manufacturing Corrugated Boxes: Lateral Corrugator Frank C. Murray Ph.D.; , Roman

  17. June 2015 Most Viewed Documents for Fission And Nuclear Technologies |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information June 2015 Most Viewed Documents for Fission And Nuclear Technologies Estimation of gas leak rates through very small orifices and channels. [From sealed PuO/sub 2/ containers under accident conditions] Bomelburg, H.J. (1977) 305 System Definition and Analysis: Power Plant Design and Layout NONE (1996) 296 Stress analysis and evaluation of a rectangular pressure vessel. [For equipment for sampling Hanford tank radwaste]

  18. March 2014 Most Viewed Documents for Energy Storage, Conversion, And

    Office of Scientific and Technical Information (OSTI)

    Utilization | OSTI, US Dept of Energy Office of Scientific and Technical Information March 2014 Most Viewed Documents for Energy Storage, Conversion, And Utilization Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 291 Energy Saving Potentials and Air Quality Benefits of Urban HeatIslandMitigation Akbari, Hashem (2005) 85 Seventh Edition Fuel Cell Handbook NETL (2004) 68 Separation of heavy metals: Removal from industrial wastewaters and

  19. March 2015 Most Viewed Documents for Energy Storage, Conversion, And

    Office of Scientific and Technical Information (OSTI)

    Utilization | OSTI, US Dept of Energy Office of Scientific and Technical Information March 2015 Most Viewed Documents for Energy Storage, Conversion, And Utilization Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 1019 Separation of heavy metals: Removal from industrial wastewaters and contaminated soil Peters, R.W.; Shem, L. (1993) 229 Energy Saving Potentials and Air Quality Benefits of Urban HeatIslandMitigation Akbari, Hashem (2005)

  20. March 2015 Most Viewed Documents for Fission And Nuclear Technologies |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information 5 Most Viewed Documents for Fission And Nuclear Technologies Stress analysis and evaluation of a rectangular pressure vessel. [For equipment for sampling Hanford tank radwaste] Rezvani, M.A.; Ziada, H.H. (Westinghouse Hanford Co., Richland, WA (United States)); Shurrab, M.S. (Westinghouse Savannah River Co., Aiken, SC (United States)) (1992) 223 Estimation of gas leak rates through very small orifices and channels. [From

  1. Most Viewed Documents for Energy Storage, Conversion, and Utilization:

    Office of Scientific and Technical Information (OSTI)

    December 2014 | OSTI, US Dept of Energy Office of Scientific and Technical Information Most Viewed Documents for Energy Storage, Conversion, and Utilization: December 2014 Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 322 Energy Saving Potentials and Air Quality Benefits of Urban HeatIslandMitigation Akbari, Hashem (2005) 107 Separation of heavy metals: Removal from industrial wastewaters and contaminated soil Peters, R.W.; Shem, L.

  2. Most Viewed Documents for Energy Storage, Conversion, and Utilization:

    Office of Scientific and Technical Information (OSTI)

    September 2014 | OSTI, US Dept of Energy Office of Scientific and Technical Information Most Viewed Documents for Energy Storage, Conversion, and Utilization: September 2014 Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 193 An Improved Method of Manufacturing Corrugated Boxes: Lateral Corrugator Frank C. Murray Ph.D.; , Roman Popil Ph.D.; Michael Shaepe (formerly with IPST, now at Cargill. Inc) (2008) 79 Energy Saving Potentials and

  3. Most Viewed Documents for Environmental Sciences: December 2014 | OSTI, US

    Office of Scientific and Technical Information (OSTI)

    Dept of Energy Office of Scientific and Technical Information Most Viewed Documents for Environmental Sciences: December 2014 Separation of heavy metals: Removal from industrial wastewaters and contaminated soil Peters, R.W.; Shem, L. (1993) 107 Improved Magnus` form approximation of saturation vapor pressure Alduchov, O.A.; Eskridge, R.E. [National Oceanic and Atmospheric Administration, Asheville, NC (United States). National Climatic Data Center] (1997) 50 Statistical methods for

  4. Most Viewed Documents for Fission and Nuclear Technologies: December 2014 |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information Most Viewed Documents for Fission and Nuclear Technologies: December 2014 Stress analysis and evaluation of a rectangular pressure vessel. [For equipment for sampling Hanford tank radwaste] Rezvani, M.A.; Ziada, H.H. (Westinghouse Hanford Co., Richland, WA (United States)); Shurrab, M.S. (Westinghouse Savannah River Co., Aiken, SC (United States)) (1992) 67 Behavior of spent nuclear fuel in water pool storage Johnson,

  5. Most Viewed Documents for Mathematics and Computing: December 2014 | OSTI,

    Office of Scientific and Technical Information (OSTI)

    US Dept of Energy Office of Scientific and Technical Information Most Viewed Documents for Mathematics and Computing: December 2014 Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 322 Levenberg--Marquardt algorithm: implementation and theory More, J.J. (1977) 64 A comparison of risk assessment techniques from qualitative to quantitative Altenbach, T.J. (1995) 51 Lecture notes for introduction to safety and health Biele, F. (1992) 50

  6. Most Viewed Documents for Renewable Energy Sources: December 2014 | OSTI,

    Office of Scientific and Technical Information (OSTI)

    US Dept of Energy Office of Scientific and Technical Information Most Viewed Documents for Renewable Energy Sources: December 2014 Chapter 11. Heat Exchangers Rafferty, Kevin D.; Culver, Gene (1998) 339 Generalized displacement correlation method for estimating stress intensity factors Fu, P; Johnson, S M; Settgast, R R; Carrigan, C R (2011) 107 Seventh Edition Fuel Cell Handbook NETL (2004) 96 Advanced Electric Submersible Pump Design Tool for Geothermal Applications Xuele Qi; Norman

  7. Most Viewed Documents for Renewable Energy Sources: September 2014 | OSTI,

    Office of Scientific and Technical Information (OSTI)

    US Dept of Energy Office of Scientific and Technical Information Most Viewed Documents for Renewable Energy Sources: September 2014 Chapter 11. Heat Exchangers Rafferty, Kevin D.; Culver, Gene (1998) 224 Advanced Electric Submersible Pump Design Tool for Geothermal Applications Xuele Qi; Norman Turnquist; Farshad Ghasripoor (2012) 179 Generalized displacement correlation method for estimating stress intensity factors Fu, P; Johnson, S M; Settgast, R R; Carrigan, C R (2011) 138 Hybrid Cooling

  8. ZERO-TIME INDICATOR

    DOE Patents [OSTI]

    Sander, H.H.

    1960-08-30

    The travel time of a nuclear shock wave from its point of origin to a location can be determined accurately by an apparatus for noting and comparably recording both zerotime, as indicated by the electromagnetic transient associated with the nuclear detonation, and shock wave arrival time.

  9. Task Time Tracker

    Energy Science and Technology Software Center (OSTI)

    2013-07-24

    This client-side web app tracks the amount of time spent on arbitrary tasks. It allosw the creation of an unlimited number of arbitrarily named tasks ans via simple interactions, tracks the amount of time spent working on the drfined tasks.

  10. TIMING OF SHOCK WAVES

    DOE Patents [OSTI]

    Tuck, J.L.

    1955-03-01

    This patent relates to means for ascertaining the instant of arrival of a shock wave in an exploslve charge and apparatus utilizing this means to coordinate the timing of two operations involving a short lnterval of time. A pair of spaced electrodes are inserted along the line of an explosive train with a voltage applied there-across which is insufficient to cause discharge. When it is desired to initiate operation of a device at the time the explosive shock wave reaches a particular point on the explosive line, the device having an inherent time delay, the electrodes are located ahead of the point such that the ionization of the area between the electrodes caused by the traveling explosive shock wave sends a signal to initiate operation of the device to cause it to operate at the proper time. The operated device may be photographic equipment consisting of an x-ray illuminating tube.

  11. Fundamental aspects of deuterium retention in tungsten at high flux plasma exposure

    SciTech Connect (OSTI)

    Ogorodnikova, O. V.

    2015-08-21

    An effect of enhanced trapping of deuterium in tungsten at high flux was discovered. It was shown analytically and confirmed experimentally that the deuterium trapping in a presence of high density of defects in tungsten (W) depends on the ion energy and ion flux. Newly developed analytical model explains experimentally observed discrepancy of deuterium trapping at radiation-induced defects in tungsten at different ion fluxes that significantly improves a prediction of hydrogen isotope accumulation in different plasma devices, including ITER and DEMO. The developed model can be used for many system of hydrogen in a metal in both normal and extreme environments (high fluxes, elevated temperatures, neutron irradiation, etc.). This new model allows, for the first time, to validate density function theory (DFT) predictions of multiple occupation of a defect with deuterium against experimental data that bridge the gap in length and time scale between DFT calculations and experiments. By comparing first-principle calculations based on DFT and semi-empirical “adsorption model,” it was proved that the mechanism of hydrogen isotope trapping in a vacancy cluster is similar to a chemisorption on a surface. Binding energies of deuterium with different types of defects in W were defined. Moreover, the surface barrier of deuterium to be chemisorbed on a clean W surface was found to be less than 1 eV and kinetics of deuterium release is limited by de-trapping from defects rather than to be limited by surface effects.

  12. Digital time delay

    DOE Patents [OSTI]

    Martin, A.D.

    1986-05-09

    Method and apparatus are provided for generating an output pulse following a trigger pulse at a time delay interval preset with a resolution which is high relative to a low resolution available from supplied clock pulses. A first lumped constant delay provides a first output signal at predetermined interpolation intervals corresponding to the desired high resolution time interval. Latching circuits latch the high resolution data to form a first synchronizing data set. A selected time interval has been preset to internal counters and corrected for circuit propagation delay times having the same order of magnitude as the desired high resolution. Internal system clock pulses count down the counters to generate an internal pulse delayed by an internal which is functionally related to the preset time interval. A second LCD corrects the internal signal with the high resolution time delay. A second internal pulse is then applied to a third LCD to generate a second set of synchronizing data which is complementary with the first set of synchronizing data for presentation to logic circuits. The logic circuits further delay the internal output signal with the internal pulses. The final delayed output signal thereafter enables the output pulse generator to produce the desired output pulse at the preset time delay interval following input of the trigger pulse.

  13. Parallel time integration software

    Energy Science and Technology Software Center (OSTI)

    2014-07-01

    This package implements an optimal-scaling multigrid solver for the (non) linear systems that arise from the discretization of problems with evolutionary behavior. Typically, solution algorithms for evolution equations are based on a time-marching approach, solving sequentially for one time step after the other. Parallelism in these traditional time-integrarion techniques is limited to spatial parallelism. However, current trends in computer architectures are leading twards system with more, but not faster. processors. Therefore, faster compute speeds mustmore » come from greater parallelism. One approach to achieve parallelism in time is with multigrid, but extending classical multigrid methods for elliptic poerators to this setting is a significant achievement. In this software, we implement a non-intrusive, optimal-scaling time-parallel method based on multigrid reduction techniques. The examples in the package demonstrate optimality of our multigrid-reduction-in-time algorithm (MGRIT) for solving a variety of parabolic equations in two and three sparial dimensions. These examples can also be used to show that MGRIT can achieve significant speedup in comparison to sequential time marching on modern architectures.« less

  14. Charge Retention by Gold Clusters on Surfaces Prepared Using Soft Landing of Mass Selected Ions

    SciTech Connect (OSTI)

    Johnson, Grant E.; Priest, Thomas A.; Laskin, Julia

    2012-01-24

    Monodisperse gold clusters have been prepared on surfaces in different charge states through soft landing of mass-selected ions. Ligand-stabilized gold clusters were prepared in methanol solution by reduction of chloro(triphenylphosphine)gold(I) with borane tert-butylamine complex in the presence of 1,3-bis(diphenylphosphino)propane. Electrospray ionization was used to introduce the clusters into the gas-phase and mass-selection was employed to isolate a single ionic cluster species (Au11L53+, L = 1,3-bis(diphenylphosphino)propane) which was delivered to surfaces at well controlled kinetic energies. Using in-situ time of flight secondary ion mass spectrometry (TOF-SIMS) it is demonstrated that the Au11L53+ cluster retains its 3+ charge state when soft landed onto the surface of a 1H,1H,2H,2H-

  15. VARIABLE TIME DELAY MEANS

    DOE Patents [OSTI]

    Clemensen, R.E.

    1959-11-01

    An electrically variable time delay line is described which may be readily controlled simuitaneously with variable impedance matching means coupied thereto such that reflections are prevented. Broadly, the delay line includes a signal winding about a magnetic core whose permeability is electrically variable. Inasmuch as the inductance of the line varies directly with the permeability, the time delay and characteristic impedance of the line both vary as the square root of the permeability. Consequently, impedance matching means may be varied similariy and simultaneously w:th the electrically variable permeability to match the line impedance over the entire range of time delay whereby reflections are prevented.

  16. Time of Flight

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Flight Techniques Since the LANSCE proton beam is pulsed, the energy of the neutrons that are produced can be determined by Time-of-Flight (TOF) techniques. Neutron Time-of-Flight Since the LANSCE proton beam is pulsed, the energy of the neutrons that are produced can be determined by Time-of-Flight (TOF) techniques. The proton beam pulse strikes the tungsten neutron production target and neutrons, gamma rays and charged particles are produced. The charged particles are removed from the beam

  17. Time-Resolved

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ultrafast Spectroscopy of Warm Dense Matter Real-Time Chemical Imaging of Bacterial Biofilm Development Using Light to Control How X Rays Interact with Matter X-Ray Imaging of...

  18. Time Card Entry System

    SciTech Connect (OSTI)

    Montierth, B. S.

    1996-05-07

    The Time Card Entry System was developed for the Department of Enegy, Idaho Operations Office (DOE-ID) to interface with the DOE headquarters (DOE-HQ) Electronic Time and Attendance (ETA) system for payroll. It features pop-up window pick lists for Work Breakdown Structure numbers and Hour Codes and has extensive processing that ensures that time and attendance reported by the employee fulfills U.S. Government/OMB requirements before Timekeepers process the data at the end of the two week payroll cycle using ETA. A tour of duty profile (e.g., ten hour day, four day week with Sunday, friday and Saturday off), previously established in the ETA system, is imported into the Time Card Entry System by the timekeepers. An individual''s profile establishes the basis for validation of time of day and number of hours worked per day. At the end of the two cycle, data is exported by the timekeepers from the Time Card Entry System into ETA files.

  19. Time Card Entry System

    Energy Science and Technology Software Center (OSTI)

    1996-05-07

    The Time Card Entry System was developed for the Department of Enegy, Idaho Operations Office (DOE-ID) to interface with the DOE headquarters (DOE-HQ) Electronic Time and Attendance (ETA) system for payroll. It features pop-up window pick lists for Work Breakdown Structure numbers and Hour Codes and has extensive processing that ensures that time and attendance reported by the employee fulfills U.S. Government/OMB requirements before Timekeepers process the data at the end of the two weekmore » payroll cycle using ETA. A tour of duty profile (e.g., ten hour day, four day week with Sunday, friday and Saturday off), previously established in the ETA system, is imported into the Time Card Entry System by the timekeepers. An individual''s profile establishes the basis for validation of time of day and number of hours worked per day. At the end of the two cycle, data is exported by the timekeepers from the Time Card Entry System into ETA files.« less

  20. DOE Tour of Zero: The Isler Residence by Clifton View Homes ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Isler Residence by Clifton View Homes DOE Tour of Zero: The Isler Residence by Clifton View Homes Addthis 1 of 23 This custom home built on Whidbey Island in Washington state by...

  1. DOE Tour of Zero: Marine Drive by Clifton View Homes | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Tour of Zero: Marine Drive by Clifton View Homes Addthis 1 of 10 Clifton View Homes built this 2,408-square-foot zero energy home in Coupeville, Washington, to the performance ...

  2. T-704: RSA enVision Lets Remote Users View Files and Remote Authentica...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    RSA enVision Lets Remote Users View Files and Remote Authenticated Users Obtain Password T-704: RSA enVision Lets Remote Users View Files and Remote Authenticated Users Obtain...

  3. Consumer Views on Transportation and Energy (Third Edition)

    SciTech Connect (OSTI)

    Kubik, M.

    2006-01-01

    This report has been assembled to provide the U.S. Department of Energy's (DOE's) Office of Energy Efficiency and Renewable Energy (EERE) with an idea of how the American public views various transportation, energy, and environmental issues. The data presented in this report have been drawn from multiple sources: surveys conducted by the Opinion Research Corporation (ORC) for the National Renewable Energy Laboratory (NREL) that are commissioned and funded by EERE, Gallup polls, news organization polls, surveys conducted by independent groups and academic institutions, and other sources.

  4. September 2013 Most Viewed Documents for Environmental Sciences | OSTI, US

    Office of Scientific and Technical Information (OSTI)

    Dept of Energy Office of Scientific and Technical Information September 2013 Most Viewed Documents for Environmental Sciences Building a secondary containment system Broder, M.F. (1994) 59 Separation of heavy metals: Removal from industrial wastewaters and contaminated soil Peters, R.W.; Shem, L. (1993) 45 Test of a magnetic device for the amelioration of scale formation at Treatment Facility D Krauter, P.W., Harrar, J.E., Orloff, S.P., Bahowick, S.M. (1996) 38 Mitigation options for

  5. September 2013 Most Viewed Documents for Power Generation And Distribution

    Office of Scientific and Technical Information (OSTI)

    | OSTI, US Dept of Energy Office of Scientific and Technical Information September 2013 Most Viewed Documents for Power Generation And Distribution Electric power high-voltage transmission lines: Design options, cost, and electric and magnetic field levels Stoffel, J.B.; Pentecost, E.D.; Roman, R.D.; Traczyk, P.A. (1994) 200 Wet cooling towers: rule-of-thumb design and simulation Leeper, S.A. (1981) 103 ASPEN Plus Simulation of CO2 Recovery Process Charles W. White III (2003) 76 Feed-pump

  6. September 2015 Most Viewed Documents for Power Generation And Distribution

    Office of Scientific and Technical Information (OSTI)

    | OSTI, US Dept of Energy Office of Scientific and Technical Information September 2015 Most Viewed Documents for Power Generation And Distribution Electric power high-voltage transmission lines: Design options, cost, and electric and magnetic field levels Stoffel, J.B.; Pentecost, E.D.; Roman, R.D.; Traczyk, P.A. (1994) 700 Wet cooling towers: rule-of-thumb design and simulation Leeper, S.A. (1981) 190 Load flow analysis: Base cases, data, diagrams, and results Portante, E.C.; Kavicky,

  7. Ground control failures. A pictorial view of case studies

    SciTech Connect (OSTI)

    Peng, S.S.

    2007-07-01

    The book shows, in pictorial views, many forms and/or stages of types of failures in mines, for instance, cutter, roof falls, and cribs. In each case, the year of occurrence is stated in the beginning so that the environment or technological background under which it occurred are reflected. The narrative than begins with the mining and geological conditions, followed by a description of the ground control problems and recommended solutions and results, if any. The sections cover failure of pillars, roof falls, longwall, roof bolting, multiple-seam mining, floor heave, longwall, flooding and weathering of coal, old workings, and shortwall and thin-seam plow longwall.

  8. Applications of LabVIEW programming in a glovebox environment

    SciTech Connect (OSTI)

    Evans, M.E.; Peralta, G.; Gray, D.

    1995-09-01

    When dealing with neutron radiation one of the keys to reducing worker exposure is to have as much distance and shielding between the radiation and the radiation worker as possible. Using a PC to control a process from a remote location allows the distance between the radiation worker and the radiation source to be increase. Increasing the distance at which radiation worker can control a process allows more shielding to be placed around the glovebox. There are many commercial packages that allow controlling remote processes with a PC. This paper shows how flexible the LabVIEW Graphical Programming Language can be in implementing the remote control of glovebox process.

  9. April 2013 Most Viewed Documents for Energy Storage, Conversion, And

    Office of Scientific and Technical Information (OSTI)

    Utilization | OSTI, US Dept of Energy Office of Scientific and Technical Information April 2013 Most Viewed Documents for Energy Storage, Conversion, And Utilization Seventh Edition Fuel Cell Handbook NETL (2004) 628 Continuously variable transmissions: theory and practice Beachley, N.H.; Frank, A.A. (null) 205 A study of lead-acid battery efficiency near top-of-charge and the impact on PV system design Stevens, J.W.; Corey, G.P. (1996) 173 Energy Saving Potentials and Air Quality Benefits

  10. April 2013 Most Viewed Documents for Fission And Nuclear Technologies |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information April 2013 Most Viewed Documents for Fission And Nuclear Technologies Behavior of spent nuclear fuel in water pool storage Johnson, A.B. Jr. (null) 298 Estimation of gas leak rates through very small orifices and channels. [From sealed PuO/sub 2/ containers under accident conditions] Bomelburg, H.J. (null) 292 Graphite design handbook Ho, F.H. (1988) 216 System Definition and Analysis: Power Plant Design and Layout NONE

  11. April 2013 Most Viewed Documents for Power Generation And Distribution |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information April 2013 Most Viewed Documents for Power Generation And Distribution Electric power high-voltage transmission lines: Design options, cost, and electric and magnetic field levels Stoffel, J.B.; Pentecost, E.D.; Roman, R.D.; Traczyk, P.A. (1994) 719 Seventh Edition Fuel Cell Handbook NETL (2004) 628 ASPEN Plus Simulation of CO2 Recovery Process Charles W. White III (2003) 343 Wet cooling towers: rule-of-thumb design and

  12. December 2015 Most Viewed Documents for Mathematics And Computing | OSTI,

    Office of Scientific and Technical Information (OSTI)

    US Dept of Energy Office of Scientific and Technical Information December 2015 Most Viewed Documents for Mathematics And Computing Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 1446 Automotive vehicle sensors Sheen, S.H.; Raptis, A.C.; Moscynski, M.J. (1995) 373 A comparison of risk assessment techniques from qualitative to quantitative Altenbach, T.J. (1995) 365 Lecture notes for introduction to safety and health Biele, F. (1992) 324

  13. December 2015 Most Viewed Documents for Power Generation And Distribution |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information December 2015 Most Viewed Documents for Power Generation And Distribution Electric power high-voltage transmission lines: Design options, cost, and electric and magnetic field levels Stoffel, J.B.; Pentecost, E.D.; Roman, R.D.; Traczyk, P.A. (1994) 740 Load flow analysis: Base cases, data, diagrams, and results Portante, E.C.; Kavicky, J.A.; VanKuiken, J.C.; Peerenboom, J.P. (1997) 224 Wet cooling towers: rule-of-thumb

  14. January 2013 Most Viewed Documents for Fission And Nuclear Technologies |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information January 2013 Most Viewed Documents for Fission And Nuclear Technologies Laboratory studies of shear/leach processing of zircaloy clad metallic uranium reactor fuel Swanson, J.L.; Bray, L.A.; Kjarmo, H.E.; Ryan, J.L.; Matsuzaki, C.L.; Pitman, S.G.; Haberman, J.H. Working session 3: Tubing integrity Cueto-Felgueroso, C. [Tecnatom, S.A., San Sebastian de los Reyes, Madrid (Spain)]; Strosnider, J. [NRC, Washington, DC (United

  15. July 2013 Most Viewed Documents for Energy Storage, Conversion, And

    Office of Scientific and Technical Information (OSTI)

    Utilization | OSTI, US Dept of Energy Office of Scientific and Technical Information July 2013 Most Viewed Documents for Energy Storage, Conversion, And Utilization Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 567 A study of lead-acid battery efficiency near top-of-charge and the impact on PV system design Stevens, J.W.; Corey, G.P. (1996) 142 Seventh Edition Fuel Cell Handbook NETL (2004) 133 An Improved Method of Manufacturing

  16. July 2013 Most Viewed Documents for Fission And Nuclear Technologies |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information July 2013 Most Viewed Documents for Fission And Nuclear Technologies Estimation of gas leak rates through very small orifices and channels. [From sealed PuO/sub 2/ containers under accident conditions] Bomelburg, H.J. (1977) 286 Graphite design handbook Ho, F.H. (1988) 136 Behavior of spent nuclear fuel in water pool storage Johnson, A.B. Jr. (1977) 123 Stress analysis and evaluation of a rectangular pressure vessel. [For

  17. July 2013 Most Viewed Documents for Power Generation And Distribution |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information July 2013 Most Viewed Documents for Power Generation And Distribution Electric power high-voltage transmission lines: Design options, cost, and electric and magnetic field levels Stoffel, J.B.; Pentecost, E.D.; Roman, R.D.; Traczyk, P.A. (1994) 535 ASPEN Plus Simulation of CO2 Recovery Process Charles W. White III (2003) 165 Wet cooling towers: rule-of-thumb design and simulation Leeper, S.A. (1981) 154 Load flow

  18. June 2014 Most Viewed Documents for Fission And Nuclear Technologies |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information June 2014 Most Viewed Documents for Fission And Nuclear Technologies Behavior of spent nuclear fuel in water pool storage Johnson, A.B. Jr. (1977) 78 Estimation of gas leak rates through very small orifices and channels. [From sealed PuO/sub 2/ containers under accident conditions] Bomelburg, H.J. (1977) 71 Review of thorium fuel reprocessing experience Brooksbank, R.E.; McDuffee, W.T.; Rainey, R.H. (1978) 70 Stress

  19. June 2014 Most Viewed Documents for Power Generation And Distribution |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information June 2014 Most Viewed Documents for Power Generation And Distribution Seventh Edition Fuel Cell Handbook NETL (2004) 118 Electric power high-voltage transmission lines: Design options, cost, and electric and magnetic field levels Stoffel, J.B.; Pentecost, E.D.; Roman, R.D.; Traczyk, P.A. (1994) 89 ASPEN Plus Simulation of CO2 Recovery Process Charles W. White III (2003) 85 Wet cooling towers: rule-of-thumb design and

  20. June 2015 Most Viewed Documents for Power Generation And Distribution |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information June 2015 Most Viewed Documents for Power Generation And Distribution Electric power high-voltage transmission lines: Design options, cost, and electric and magnetic field levels Stoffel, J.B.; Pentecost, E.D.; Roman, R.D.; Traczyk, P.A. (1994) 504 Wet cooling towers: rule-of-thumb design and simulation Leeper, S.A. (1981) 240 ASPEN Plus Simulation of CO2 Recovery Process Charles W. White III (2003) 160 Load flow

  1. March 2014 Most Viewed Documents for Fission And Nuclear Technologies |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information 4 Most Viewed Documents for Fission And Nuclear Technologies Behavior of spent nuclear fuel in water pool storage Johnson, A.B. Jr. (1977) 72 Peer-review study of the draft handbook for human-reliability analysis with emphasis on nuclear-power-plant applications, NUREG/CR-1278 Brune, R.L.; Weinstein, M.; Fitzwater, M.E. (1983) 67 Stress analysis and evaluation of a rectangular pressure vessel. [For equipment for sampling

  2. March 2014 Most Viewed Documents for Power Generation And Distribution |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information March 2014 Most Viewed Documents for Power Generation And Distribution ASPEN Plus Simulation of CO2 Recovery Process Charles W. White III (2003) 112 Electric power high-voltage transmission lines: Design options, cost, and electric and magnetic field levels Stoffel, J.B.; Pentecost, E.D.; Roman, R.D.; Traczyk, P.A. (1994) 83 Seventh Edition Fuel Cell Handbook NETL (2004) 68 Load flow analysis: Base cases, data, diagrams,

  3. March 2015 Most Viewed Documents for Power Generation And Distribution |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information 5 Most Viewed Documents for Power Generation And Distribution Electric power high-voltage transmission lines: Design options, cost, and electric and magnetic field levels Stoffel, J.B.; Pentecost, E.D.; Roman, R.D.; Traczyk, P.A. (1994) 317 ASPEN Plus Simulation of CO2 Recovery Process Charles W. White III (2003) 254 Wet cooling towers: rule-of-thumb design and simulation Leeper, S.A. (1981) 234 Load flow analysis: Base

  4. Most Viewed Documents for Power Generation and Distribution: December 2014

    Office of Scientific and Technical Information (OSTI)

    | OSTI, US Dept of Energy Office of Scientific and Technical Information Most Viewed Documents for Power Generation and Distribution: December 2014 Electric power high-voltage transmission lines: Design options, cost, and electric and magnetic field levels Stoffel, J.B.; Pentecost, E.D.; Roman, R.D.; Traczyk, P.A. (1994) 133 Seventh Edition Fuel Cell Handbook NETL (2004) 96 ASPEN Plus Simulation of CO2 Recovery Process Charles W. White III (2003) 84 Load flow analysis: Base cases, data,

  5. Charge Retention by Peptide Ions Soft-Landed onto Self-Assembled Monolayer Surfaces

    SciTech Connect (OSTI)

    Laskin, Julia; Wang, Peng; Hadjar, Omar; Futrell, Jean H.; Alvarez, Jormarie; Cooks, Robert G.

    2007-08-01

    Soft-landing of singly and doubly protonated peptide ions onto three self-assembled monolayer surfaces (SAMs) was performed using a novel ion deposition instrument constructed in our laboratory and a Fourier transform ion cyclotron resonance mass spectrometer (FT-ICR MS) specially designed for studying collisions of large ions with surfaces.. Modified surfaces were analyzed using in situ 2 keV Cs+ secondary ion mass spectrometry or ex situ 15 keV Ga+ time-of-flight secondary ion mass spectrometry (ToF-SIMS). The results demonstrate that a fraction of multiply protonated peptide ions retain more than one proton following soft-landing on the FSAM surface. [M+2H]2+ ions observed in FT-ICR SIMS spectra are produced by desorption of multiply charged ions from the surface, while re-ionization of singly protonated ions or neutral peptides is a source of [M+2H]2+ ions in Tof-SIMS spectra. Differences in neutralization efficiency of soft-landed ions following exposure of surfaces to laboratory air has a measurable effect on the results of ex situ ToF-SIMS analysis of soft-landed ions on SAM surfaces.

  6. Kinetics and Mechanism of Metal Retention/Release in Geochemical Processes in Soil - Final Report

    SciTech Connect (OSTI)

    Taylor, Robert W.

    2000-12-29

    Effective, remediation of soils contaminated with heavy metals requires a better understanding of the mechanisms by which the metals are retained/released in soils over a long period of time. Studies on reaction of Cr(VI) with iron-rich clays indicated that structural iron (II) in these surfaces is capable of reducing chromate to chromium (III). We found that iron (II) either found naturally or produced by treatment of clay with sodium dithionite, effectively reduced Cr (VI) to Cr (III). Thus, in situ remediation of chromium combines reduction of Cr (VI) to Cr (III) and immobilization of chromium on mineral surfaces. During this study, lead sorption on a kaolin surface was found to be a rapid and a pH dependant process in which lead sorption significantly increased with the amount of phosphate on the clay surface. This study verifies that methylmercury cation remains intact when it binds to humic acids, forming a monodentate complex with some sub-population of humic thiol ligands .

  7. A View of Environmental Justice at the U.S. Department of Energy |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy A View of Environmental Justice at the U.S. Department of Energy A View of Environmental Justice at the U.S. Department of Energy A View of Environmental Justice at the U.S. Department of Energy (3.91 MB) More Documents & Publications A View of Environmental Justice at the U.S. Department of Energy (DOE, 2014) 2012 Independent Communication and Outreach Stakeholder Satisfaction Survey Environmental Justice Strategy

  8. Visible wide angle view imaging system of KTM tokamak based on multielement image fiber bundle

    SciTech Connect (OSTI)

    Chektybayev, B. Shapovalov, G.; Kolodeshnikov, A.

    2015-05-15

    In the paper, new visible wide angle view imaging system of KTM tokamak is described. The system has been designed to observe processes inside of plasma and the processes occurring due to plasma-wall interactions through the long equatorial port. Imaging system is designed based on special image fiber bundle and entrance wide angle lens, which provide image of large section of the vacuum chamber, both poloidal half-section and divertor through the sufficiently long equatorial port. The system also consists of two video cameras: slow and fast with image intensifier. Commercial equipment had been used in design of the system that allowed reducing the cost and time for research and development. The paper also discusses advantages and disadvantages of the system in comparison with conventional endoscopes based on a lens system and considers its promising utilization in future tokamaks and future steady state fusion reactors.

  9. In-Vessel Retention Modeling Capabilities of SCDAP/RELAP5-3D{sup C}

    SciTech Connect (OSTI)

    Knudson, D.L.; Rempe, J.L.

    2002-07-01

    Molten core materials may relocate to the lower head of a reactor vessel in the latter stages of a severe accident. Under such circumstances, in-vessel retention (IVR) of the molten materials is a vital step in mitigating potential severe accident consequences. Whether IVR occurs depends on the interactions of a number of complex processes including heat transfer inside the accumulated molten pool, heat transfer from the molten pool to the reactor vessel (and to overlying fluids), and heat transfer from exterior vessel surfaces. SCDAP/RELAP5-3D{sup C} has been developed at the Idaho National Engineering and Environmental Laboratory to facilitate simulation of the processes affecting the potential for IVR, as well as processes involved in a wide variety of other reactor transients. In this paper, current capabilities of SCDAP/RELAP5-3D{sup C} relative to IVR modeling are described and results from typical applications are provided. In addition, anticipated developments to enhance IVR simulation with SCDAP/RELAP5-3D{sup C} are outlined. (authors)

  10. Retention of prolyl hydroxylase PHD2 in the cytoplasm prevents PHD2-induced anchorage-independent carcinoma cell growth

    SciTech Connect (OSTI)

    Jokilehto, Terhi; Turku Graduate School of Biomedical Sciences, Turku ; Hoegel, Heidi; Heikkinen, Pekka; Turku Graduate School of Biomedical Sciences, Turku ; Rantanen, Krista; Elenius, Klaus; Department of Medical Biochemistry and Genetics, University of Turku and Turku University Hospital, Turku ; Sundstroem, Jari; Jaakkola, Panu M.; Department of Oncology and Radiotherapy, University of Turku and Turku University Hospital, Turku

    2010-04-15

    Cellular oxygen tension is sensed by a family of prolyl hydroxylases (PHD1-3) that regulate the degradation of hypoxia-inducible factors (HIF-1{alpha} and -2{alpha}). The PHD2 isoform is considered as the main downregulator of HIF in normoxia. Our previous results have shown that nuclear translocation of PHD2 associates with poorly differentiated tumor phenotype implying that nuclear PHD2 expression is advantageous for tumor growth. Here we show that a pool of PHD2 is shuttled between the nucleus and the cytoplasm. In line with this, accumulation of wild type PHD2 in the nucleus was detected in human colon adenocarcinomas and in cultured carcinoma cells. The PHD2 isoforms showing high nuclear expression increased anchorage-independent carcinoma cell growth. However, retention of PHD2 in the cytoplasm inhibited the anchorage-independent cell growth. A region that inhibits the nuclear localization of PHD2 was identified and the deletion of the region promoted anchorage-independent growth of carcinoma cells. Finally, the cytoplasmic PHD2, as compared with the nuclear PHD2, less efficiently downregulated HIF expression. Forced HIF-1{alpha} or -2{alpha} expression decreased and attenuation of HIF expression increased the anchorage-independent cell growth. However, hydroxylase-inactivating mutations in PHD2 had no effect on cell growth. The data imply that nuclear PHD2 localization promotes malignant cancer phenotype.

  11. INVESTIGATION OF PHASE AND EMULSION BEHAVIOR, SURFACTANT RETENTION, AND CONDENSATE RECOVERY FOR CONDENSATE/WATER/ETHANOL MIXTURES

    SciTech Connect (OSTI)

    Ramanathan Sampath

    2003-10-01

    This semi-annual technical progress report describes work performed at Morehouse College under DOE Grant No. DE-FG26-02NT15447 during the period April 01, 2003 to September 30, 2003 which covers the second six months of the project. Presently work is in progress to characterize phase and emulsion behavior for ethylbenzene/water/ethanol system. During this reporting period, salinity scans were completed for 0, 5, 10, 20, 50, 100, 250, 500, and 1000 mM salt concentrations at room temperature to identify optimal salinity intervals in which all three phases coexist for this system. Temperature scans are in progress at Morehouse College to identify the optimal temperature, and the temperature intervals in which all three phases coexist for this system. Coreflooding experiments are being conducted by our industrial partner in this project, Surtek, CO, to measure the effectiveness for surfactant retention and condensate recovery in flooding processes. Review of the current literature in the subject area, and modeling efforts that were established in our previous studies to predict electrical conductivities and inversion phenomena was continued from the previous reporting period. Based on the review a computer model to predict electrical conductivities of the ethylbenzene (that has the equivalent carbon number of the condensate)/water/ethanol system is being developed.

  12. Molecular structure in soil humic substances: The new view

    SciTech Connect (OSTI)

    Sutton, Rebecca; Sposito, Garrison

    2005-04-21

    A critical examination of published data obtained primarily from recent nuclear magnetic resonance spectroscopy, X-ray absorption near-edge structure spectroscopy, electrospray ionization-mass spectrometry, and pyrolysis studies reveals an evolving new view of the molecular structure of soil humic substances. According to the new view, humic substances are collections of diverse, relatively low molecular mass components forming dynamic associations stabilized by hydrophobic interactions and hydrogen bonds. These associations are capable of organizing into micellar structures in suitable aqueous environments. Humic components display contrasting molecular motional behavior and may be spatially segregated on a scale of nanometers. Within this new structural context, these components comprise any molecules intimately associated with a humic substance, such that they cannot be separated effectively by chemical or physical methods. Thus biomolecules strongly bound within humic fractions are by definition humic components, a conclusion that necessarily calls into question key biogeochemical pathways traditionally thought to be required for the formation of humic substances. Further research is needed to elucidate the intermolecular interactions that link humic components into supramolecular associations and to establish the pathways by which these associations emerge from the degradation of organic litter.

  13. A MULTI-SPACECRAFT VIEW OF A GIANT FILAMENT ERUPTION DURING 2009 SEPTEMBER 26/27

    SciTech Connect (OSTI)

    Gosain, Sanjay; Schmieder, Brigitte; Artzner, Guy; Bogachev, Sergei; Toeroek, Tibor

    2012-12-10

    We analyze multi-spacecraft observations of a giant filament eruption that occurred during 2009 September 26 and 27. The filament eruption was associated with a relatively slow coronal mass ejection. The filament consisted of a large and a small part, and both parts erupted nearly simultaneously. Here we focus on the eruption associated with the larger part of the filament. The STEREO satellites were separated by about 117 Degree-Sign during this event, so we additionally used SoHO/EIT and CORONAS/TESIS observations as a third eye (Earth view) to aid our measurements. We measure the plane-of-sky trajectory of the filament as seen from STEREO-A and TESIS viewpoints. Using a simple trigonometric relation, we then use these measurements to estimate the true direction of propagation of the filament which allows us to derive the true R/R{sub Sun }-time profile of the filament apex. Furthermore, we develop a new tomographic method that can potentially provide a more robust three-dimensional (3D) reconstruction by exploiting multiple simultaneous views. We apply this method also to investigate the 3D evolution of the top part of filament. We expect this method to be useful when SDO and STEREO observations are combined. We then analyze the kinematics of the eruptive filament during its rapid acceleration phase by fitting different functional forms to the height-time data derived from the two methods. We find that for both methods an exponential function fits the rise profile of the filament slightly better than parabolic or cubic functions. Finally, we confront these results with the predictions of theoretical eruption models.

  14. Climate Time-Machine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Climate Time-Machine Climate Time-Machine 20th Century Reanalysis Project Explores Earth's Past and Future Climate January 25, 2011 Berkeley Lab Contact: Jon Bashor, jbashor@lbl.gov, +1 510 486 5849 Wiley-Blackwell Contact: Ben Norman, lifesciencenews@wiley.com,+44(0)1243 770 375 Science Contact: Jeffrey Whitaker, Jeffrey.S.Whitaker@noaa.gov, +1 303 497 6313 2011-01-25-20C-Climate.jpg A dust storm approaching Stratford, TX on April 18, 1935. The 20th Century Reanalysis Project will provide

  15. Integration of Predicted Atmospheric Contaminant Plumes into ArcView GIS

    SciTech Connect (OSTI)

    Koffman, Larry D.

    2005-10-10

    The Savannah River National Laboratory (SRNL) plays a key role in emergency response scenarios in which there may be a release of atmospheric chemical or radiological contamination at the DOE's Savannah River Site (SRS). Meteorologists at SRNL use a variety of tools to predict the path of the plume and levels of contamination along the path. These predictions are used to guide field teams that take sample measurements for verification. Integration of these predicted plumes as well as field measurements into existing Geographic Information System (GIS) interactive maps provides key additional information for decision makers during an emergency. In addition, having this information in GIS format facilitates sharing the information with other agencies that use GIS. In order to be useful during an emergency, an application for converting predictions or measurements into GIS format must be automated and simple to use. Thus, a key design goal in developing such applications is ease of use. Simple menu selections and intuitive forms with graphical user interfaces are used to accomplish this goal. Applications have been written to convert two different predictive code results into ArcView GIS. Meteorologists at SRNL use the Puff/Plume code, which is tied to real-time wind data, to predict the direction and spread of the atmospheric plume for early assessment. The calculated circular puffs are converted into an ArcView polygon shapefile with attributes for predicted time, dose, and radius of the puff. The meteorologists use the more sophisticated Lagrangian Particle Dispersion Model (LPDM) to predict particle dispersion and deposition. The calculational grid is brought into ArcView as a point shapefile and then interpolated to ARC GRID format using Spatial Analyst. This GRID can then be contoured into a line shapefile, which is easily shared with other agencies. The deposition grid is also automatically contoured for values that correspond to FDA Derived Intervention Levels

  16. An In-situ materials analysis particle probe (MAPP) diagnostic to study particle density control and hydrogenic fuel retention in NSTX

    SciTech Connect (OSTI)

    Allain, Jean-Paul

    2014-09-05

    A new materials analysis particle probe (MAPP) was designed, constructed and tested to develop understanding of particle control and hydrogenic fuel retention in lithium-based plasma-facing surfaces in NSTX. The novel feature of MAPP is an in-situ tool to probe the divertor NSTX floor during LLD and lithium-coating shots with subsequent transport to a post-exposure in-vacuo surface analysis chamber to measure D retention. In addition, the implications of a lithiated graphite-dominated plasma-surface environment in NSTX on LLD performance, operation and ultimately hydrogenic pumping and particle control capability are investigated in this proposal. MAPP will be an invaluable tool for erosion/redeposition simulation code validation.

  17. Genepool Time Heatmaps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Genepool Time Heatmaps Heatmap of Time and Slots Requested vs Time Waited (in hours) | Queue: All | Last 7 Days Time Requested Slots <1h 1-2h 2-6h 6-12h 12-24h 24-36h 36-48h 48h-1wk >1wk Job Count Longest Wait 1 23.0 (233) 0.37 (1819) 27.54 (49888) 5.85 (124593) 1.23 (39835) 0.34 (732) 0 0.4 (224) 0.02 (1) 217325 538.96 2 0 0.01 (19) 2.54 (78) 0.2 (140) 0.99 (2683) 0 0 0 0 2920 9.1 4 0.08 (1) 0 2.82 (141) 0.36 (143) 1.07 (12) 0.06 (5) 0.01 (5) 0.06 (1) 1.3 (5) 313 20.48 6 0.01 (2) 0 0.09

  18. Time and Attendance Reporting

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-10-22

    DOE O 535.1 establishes the Department's requirements and responsibilities governing time and attendance reporting. The purpose of this revision is to reflect the transition of payroll processing from the Capital Accounting Center to the Defense Finance and Accounting System. Cancels DOE O 3600.1B. Canceled by DOE O 322.1C.

  19. Time Series Database

    Energy Science and Technology Software Center (OSTI)

    2007-11-02

    TSDB is a Python module for storing large volumes of time series data. TSDB stores data in binary files indexed by a timestamp. Aggregation functions (such as rate, sum, avg, etc.) can be performed on the data, but data is never discarded. TSDB is presently best suited for SNMP data but new data types are easily added.

  20. Time-Encoded Imagers.

    SciTech Connect (OSTI)

    Marleau, Peter; Brubaker, Erik

    2014-11-01

    This report provides a short overview of the DNN R&D funded project, Time-Encoded Imagers. The project began in FY11 and concluded in FY14. The Project Description below provides the overall motivation and objectives for the project as well as a summary of programmatic direction. It is followed by a short description of each task and the resulting deliverables.

  1. Time reversal communication system

    DOE Patents [OSTI]

    Candy, James V.; Meyer, Alan W.

    2008-12-02

    A system of transmitting a signal through a channel medium comprises digitizing the signal, time-reversing the digitized signal, and transmitting the signal through the channel medium. The channel medium may be air, earth, water, tissue, metal, and/or non-metal.

  2. Sparse-view proton computed tomography using modulated proton beams

    SciTech Connect (OSTI)

    Lee, Jiseoc; Kim, Changhwan; Cho, Seungryong; Min, Byungjun; Kwak, Jungwon; Park, Seyjoon; Lee, Se Byeong; Park, Sungyong

    2015-02-15

    Purpose: Proton imaging that uses a modulated proton beam and an intensity detector allows a relatively fast image acquisition compared to the imaging approach based on a trajectory tracking detector. In addition, it requires a relatively simple implementation in a conventional proton therapy equipment. The model of geometric straight ray assumed in conventional computed tomography (CT) image reconstruction is however challenged by multiple-Coulomb scattering and energy straggling in the proton imaging. Radiation dose to the patient is another important issue that has to be taken care of for practical applications. In this work, the authors have investigated iterative image reconstructions after a deconvolution of the sparsely view-sampled data to address these issues in proton CT. Methods: Proton projection images were acquired using the modulated proton beams and the EBT2 film as an intensity detector. Four electron-density cylinders representing normal soft tissues and bone were used as imaged object and scanned at 40 views that are equally separated over 360°. Digitized film images were converted to water-equivalent thickness by use of an empirically derived conversion curve. For improving the image quality, a deconvolution-based image deblurring with an empirically acquired point spread function was employed. They have implemented iterative image reconstruction algorithms such as adaptive steepest descent-projection onto convex sets (ASD-POCS), superiorization method–projection onto convex sets (SM-POCS), superiorization method–expectation maximization (SM-EM), and expectation maximization-total variation minimization (EM-TV). Performance of the four image reconstruction algorithms was analyzed and compared quantitatively via contrast-to-noise ratio (CNR) and root-mean-square-error (RMSE). Results: Objects of higher electron density have been reconstructed more accurately than those of lower density objects. The bone, for example, has been reconstructed

  3. Mechanisms of gas retention and release: Experimental results for Hanford single-shell waste tanks 241-A-101, 241-S-106, and 241-U-103

    SciTech Connect (OSTI)

    Rassat, S.D.; Caley, S.M.; Bredt, P.R.; Gauglitz, P.A.; Rinehart, D.E.; Forbes, S.V.

    1998-09-01

    The 177 underground waste storage tanks at the Hanford Site contain millions of gallons of radioactive waste resulting from the purification of nuclear materials and related processes. Through various mechanisms, flammable gas mixtures of hydrogen, ammonia, methane, and nitrous oxide are generated and retained in significant quantities within the waste in many ({approximately}25) of these tanks. The potential for large releases of retained gas from these wastes creates a flammability hazard. It is a critical component of the effort to understand the flammability hazard and a primary goal of this laboratory investigation to establish an understanding of the mechanisms of gas retention and release in these wastes. The results of bubble retention experimental studies using waste samples from several waste tanks and a variety of waste types support resolution of the Flammable Gas Safety Issue. Gas bubble retention information gained in the pursuit of safe storage will, in turn, benefit future waste operations including salt-well pumping, waste transfers, and sluicing/retrieval.

  4. Efficient Real-Time Time-Dependent Density Functional Theory...

    Office of Scientific and Technical Information (OSTI)

    Efficient Real-Time Time-Dependent Density Functional Theory Method and its Application to a Collision of an Ion with a 2D Material Title: Efficient Real-Time Time-Dependent ...

  5. Tevatron injection timing

    SciTech Connect (OSTI)

    Saritepe, S.; Annala, G.

    1993-06-01

    Bunched beam transfer from one accelerator to another requires coordination and synchronization of many ramped devices. During collider operation timing issues are more complicated since one has to switch from proton injection devices to antiproton injection devices. Proton and antiproton transfers are clearly distinct sequences since protons and antiprotons circulate in opposite directions in the Main Ring (MR) and in the Tevatron. The time bumps are different, the kicker firing delays are different, the kickers and lambertson magnets are different, etc. Antiprotons are too precious to be used for tuning purposes, therefore protons are transferred from the Tevatron back into the Main Ring, tracing the path of antiprotons backwards. This tuning operation is called ``reverse injection.`` Previously, the reverse injection was handled in one supercycle. One batch of uncoalesced bunches was injected into the Tevatron and ejected after 40 seconds. Then the orbit closure was performed in the MR. In the new scheme the lambertson magnets have to be moved and separator polarities have to be switched, activities that cannot be completed in one supercycle. Therefore, the reverse injection sequence was changed. This involved the redefinition of TVBS clock event $D8 as MRBS $D8 thus making it possible to inject 6 proton batches (or coalesced bunches) and eject them one at a time on command, performing orbit closure each time in the MR. Injection devices are clock event driven. The TCLK is used as the reference clock. Certain TCLK events are triggered by the MR beam synchronized clock (MRBS) events. Some delays are measured in terms of MRBS ticks and MR revolutions. See Appendix A for a brief description of the beam synchronized clocks.

  6. Instrumentation requirements from the user's view. [For airbreathing hypersonic engines

    SciTech Connect (OSTI)

    Harsha, P.T.

    1988-01-01

    The use of combustor diagnostics is considered from the point of view of demonstration of performance of an airbreathing hypersonic engine. The basic need is seen to be that of providing the data necessary to verify performance predictions for the engine as installed in the airplane. This necessitates the use of a diagnostics capability that can provide the inputs required by the computational analyses that will be used to assess this performance. Because of the cost of ground test facilities, a premium is placed on measurement technique reliability and redundancy of instrumentation. A mix of nonintrusive optical techniques and probe-based measurements is seen to be the best approach using current diagnostics capability; one such instrument mix is outlined for a ramjet/scramjet test program. 11 references.

  7. Real-time hydro coordination and economic hydro optimization

    SciTech Connect (OSTI)

    Dasigenis, A.T.; Garcia-San Pedro, A.R.

    1995-12-31

    This paper addresses the real-time aspects of the Hydro-Thermal Coordination problem. It describes the real-time modeling and monitoring of hydro resources, and the use of the resulting real-time hydraulic data in the on-line Economic Dispatch algorithm. A variable head, hydro loss model is incorporated that allows for on-line changes to the hydro topology. The method presented provides the operator with a current view of the available water resources, enables the validation of the real-time hydro data received from the field, and enables real-time optimization of the Hydro-Thermal Unit Commitment plan. The implementation of this approach on the Iberdrola system in Spain is described.

  8. Growth plate closure: Apex view on bone scan

    SciTech Connect (OSTI)

    Giles, P.H.; Trochei, M.; Yeates, K.

    1984-01-01

    Angular deformities of the extremities in children following premature closure of the growth plate are well known. The deformities depend on the position of an osseus bridge which forms between the epiphysis and metaphysis. Several surgical procedures including resection of the osseus bridge have been described, however, delineation of the site of fusion is difficult to define. The commonest site of growth plate arrest is the distal femoral or proximal tibial growth plate. A new technique using the bone scan has been developed which accurately defines the area and position of these osseus bridges. Two hours after injection of technetium 99m methylene diphosphonate apex views of the affected distal femoral growth plate were performed. The knee was flexed into its smallest angle. Using a pinhole collimator the gamma camera was angled to face the affected growth plate end on. The image was collected onto computer and analysed by: (I) regions of interest over segments of the growth plate to calculate the relative area of total growth plate affected: (II) generating histograms: (III) thresholding or performing isocontours to accentuate abnormal areas. The growth plate is normally uniformly increased when compared to the normal shaft of the bone. Fusion across the plate appears as an area of diminished uptake. The apex view gives a unique functional map of the growth plate such that abnormal areas are displayed, and the site, size and position of osseus fusion obtained. The technique has the potential for determining the metabolic activity of the growth plate before and after surgery. Serial studies will allow assessment of regneration of the plate and reformation of new osseus bridges.

  9. Real time Faraday spectrometer

    DOE Patents [OSTI]

    Smith, Jr., Tommy E. (Fremont, CA); Struve, Kenneth W. (Albuquerque, NM); Colella, Nicholas J. (Livermore, CA)

    1991-01-01

    This invention uses a dipole magnet to bend the path of a charged particle beam. As the deflected particles exit the magnet, they are spatially dispersed in the bend-plane of the magnet according to their respective momenta and pass to a plurality of chambers having Faraday probes positioned therein. Both the current and energy distribution of the particles is then determined by the non-intersecting Faraday probes located along the chambers. The Faraday probes are magnetically isolated from each other by thin metal walls of the chambers, effectively providing real time current-versus-energy particle measurements.

  10. Aug 2010 Times

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 August 2010 www.y12.doe.gov/news/times.php P.O. Box 2009 Oak Ridge, TN 37831-8245 W H A T ' S I N S I D E Page 2 ARRA work continues Page 4 Sharing secrets with the public Page 5 Apprentices are a sure bet Page 6 Need a yo-yo? Stop by JA BizTown's Y-12 booth Page 8 Employees drop the pounds B&W Technical Services Y-12, LLC, a partnership between Babcock & Wilcox Technical Services Group Inc. and Bechtel National Inc., operates the Y-12 National Security Complex. A newsletter for

  11. January 2013 Most Viewed Documents for Mathematics And Computing...

    Office of Scientific and Technical Information (OSTI)

    Cybersecurity through Real-Time Distributed Control Systems Kisner, Roger A ORNL; ... M ORNL REACTOR ANALYSIS AND VIRTUAL CONTROL ENVIRONMENT (RAVEN) FY12 REPORT Cristian ...

  12. New ALS Technique Gives Nanoscale Views of Complex Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    spectroscopic images of these ultra-thin nanosheets for the first time. By combining atomic force microscopy with infrared synchrotron light, ALS researchers from Berkeley Lab...

  13. January 2013 Most Viewed Documents for Physics | OSTI, US Dept...

    Office of Scientific and Technical Information (OSTI)

    Dynamic Time Expansion and Compression Using Nonlinear Waveguides Findikoglu, Alp T.; ... replaceable unit transport and handling systems Hall, T B Heating Distributions in the ...

  14. LabVIEW-based control software for para-hydrogen induced polarization instrumentation

    SciTech Connect (OSTI)

    Agraz, Jose Grunfeld, Alexander; Li, Debiao; Cunningham, Karl; Willey, Cindy; Pozos, Robert; Wagner, Shawn

    2014-04-15

    The elucidation of cell metabolic mechanisms is the modern underpinning of the diagnosis, treatment, and in some cases the prevention of disease. Para-Hydrogen induced polarization (PHIP) enhances magnetic resonance imaging (MRI) signals over 10 000 fold, allowing for the MRI of cell metabolic mechanisms. This signal enhancement is the result of hyperpolarizing endogenous substances used as contrast agents during imaging. PHIP instrumentation hyperpolarizes Carbon-13 ({sup 13}C) based substances using a process requiring control of a number of factors: chemical reaction timing, gas flow, monitoring of a static magnetic field (B{sub o}), radio frequency (RF) irradiation timing, reaction temperature, and gas pressures. Current PHIP instruments manually control the hyperpolarization process resulting in the lack of the precise control of factors listed above, resulting in non-reproducible results. We discuss the design and implementation of a LabVIEW based computer program that automatically and precisely controls the delivery and manipulation of gases and samples, monitoring gas pressures, environmental temperature, and RF sample irradiation. We show that the automated control over the hyperpolarization process results in the hyperpolarization of hydroxyethylpropionate. The implementation of this software provides the fast prototyping of PHIP instrumentation for the evaluation of a myriad of {sup 13}C based endogenous contrast agents used in molecular imaging.

  15. Real time automated inspection

    DOE Patents [OSTI]

    Fant, Karl M.; Fundakowski, Richard A.; Levitt, Tod S.; Overland, John E.; Suresh, Bindinganavle R.; Ulrich, Franz W.

    1985-01-01

    A method and apparatus relating to the real time automatic detection and classification of characteristic type surface imperfections occurring on the surfaces of material of interest such as moving hot metal slabs produced by a continuous steel caster. A data camera transversely scans continuous lines of such a surface to sense light intensities of scanned pixels and generates corresponding voltage values. The voltage values are converted to corresponding digital values to form a digital image of the surface which is subsequently processed to form an edge-enhanced image having scan lines characterized by intervals corresponding to the edges of the image. The edge-enhanced image is thresholded to segment out the edges and objects formed by the edges are segmented out by interval matching and bin tracking. Features of the objects are derived and such features are utilized to classify the objects into characteristic type surface imperfections.

  16. Time encoded radiation imaging

    DOE Patents [OSTI]

    Marleau, Peter; Brubaker, Erik; Kiff, Scott

    2014-10-21

    The various technologies presented herein relate to detecting nuclear material at a large stand-off distance. An imaging system is presented which can detect nuclear material by utilizing time encoded imaging relating to maximum and minimum radiation particle counts rates. The imaging system is integrated with a data acquisition system that can utilize variations in photon pulse shape to discriminate between neutron and gamma-ray interactions. Modulation in the detected neutron count rates as a function of the angular orientation of the detector due to attenuation of neighboring detectors is utilized to reconstruct the neutron source distribution over 360 degrees around the imaging system. Neutrons (e.g., fast neutrons) and/or gamma-rays are incident upon scintillation material in the imager, the photons generated by the scintillation material are converted to electrical energy from which the respective neutrons/gamma rays can be determined and, accordingly, a direction to, and the location of, a radiation source identified.

  17. Real time automated inspection

    DOE Patents [OSTI]

    Fant, K.M.; Fundakowski, R.A.; Levitt, T.S.; Overland, J.E.; Suresh, B.R.; Ulrich, F.W.

    1985-05-21

    A method and apparatus are described relating to the real time automatic detection and classification of characteristic type surface imperfections occurring on the surfaces of material of interest such as moving hot metal slabs produced by a continuous steel caster. A data camera transversely scans continuous lines of such a surface to sense light intensities of scanned pixels and generates corresponding voltage values. The voltage values are converted to corresponding digital values to form a digital image of the surface which is subsequently processed to form an edge-enhanced image having scan lines characterized by intervals corresponding to the edges of the image. The edge-enhanced image is thresholded to segment out the edges and objects formed by the edges by interval matching and bin tracking. Features of the objects are derived and such features are utilized to classify the objects into characteristic type surface imperfections. 43 figs.

  18. Accessing and Viewing NETL Solicitations/Funding Opportunity Announcements on FedConnect

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Accessing NETL Solicitations/Funding Opportunity Announcements in FedConnect In the Internet Explorer browser, enter the FedConnect URL www.FedConnect.net On the Main Page, click on Search Public Opportunities and Awards Under Search Criteria, select Issuing Office and type in NETL. Click on Search. Click the hyperlink under the title to view. Click on Body under Solicitation to view the solicitation/announcement instructions. To view Amendments to the solicitation/announcement, click on Body

  19. Melter viewing system for liquid-fed ceramic melters

    SciTech Connect (OSTI)

    Westsik, J.H. Jr.; Brenden, B.B.

    1988-01-01

    Melter viewing systems are an integral component of the monitoring and control systems for liquid-fed ceramic melters. The Pacific Northwest Laboratory (PNL) has designed cameras for use with glass melters at PNL, the Hanford Waste Vitrification Plant (HWVP), and West Valley Demonstration Project (WVDP). This report is a compilation of these designs. Operating experiences with one camera designed for the PNL melter are discussed. A camera has been fabricated and tested on the High-Bay Ceramic Melter (HBCM) and the Pilot-Scale Ceramic Melter (PSCM) at PNL. The camera proved to be an effective tool for monitoring the cold cap formed as the feed pool developed on the molten glass surface and for observing the physical condition of the melter. Originally, the camera was built to operate using the visible light spectrum in the melter. It was later modified to operate using the infrared (ir) spectrum. In either configuration, the picture quality decreases as the size of the cold cap increases. Large cold caps cover the molten glass, reducing the amount of visible light and reducing the plenum temperatures below 600/sup 0/C. This temperature corresponds to the lowest level of blackbody radiation to which the video tube is sensitive. The camera has been tested in melter environments for about 1900 h. The camera has withstood mechanical shocks and vibrations. The cooling system in the camera has proved effective in maintaining the optical and electronic components within acceptable temperature ranges. 10 refs., 15 figs.

  20. Synchrotron Radiation Therapy from a Medical Physics point of view

    SciTech Connect (OSTI)

    Prezado, Y.; Berkvens, P.; Braeuer-Krisch, E.; Renier, M.; Bravin, A.; Adam, J. F.; Martinez-Rovira, I.; Fois, G.; Thengumpallil, S.; Edouard, M.; Deman, P.; Vautrin, M.

    2010-07-23

    Synchrotron radiation (SR) therapy is a promising alternative to treat brain tumors, whose management is limited due to the high morbidity of the surrounding healthy tissues. Several approaches are being explored by using SR at the European Synchrotron Radiation Facility (ESRF), where three techniques are under development Synchrotron Stereotactic Radiation Therapy (SSRT), Microbeam Radiation Therapy (MRT) and Minibeam Radiation Therapy (MBRT).The sucess of the preclinical studies on SSRT and MRT has paved the way to clinical trials currently in preparation at the ESRF. With this aim, different dosimetric aspects from both theoretical and experimental points of view have been assessed. In particular, the definition of safe irradiation protocols, the beam energy providing the best balance between tumor treatment and healthy tissue sparing in MRT and MBRT, the special dosimetric considerations for small field dosimetry, etc will be described. In addition, for the clinical trials, the definition of appropiate dosimetry protocols for patients according to the well established European Medical Physics recommendations will be discussed. Finally, the state of the art of the MBRT technical developments at the ESRF will be presented. In 2006 A. Dilmanian and collaborators proposed the use of thicker microbeams (0.36-0.68 mm). This new type of radiotherapy is the most recently implemented technique at the ESRF and it has been called MBRT. The main advantage of MBRT with respect to MRT is that it does not require high dose rates. Therefore it can be more easily applied and extended outside synchrotron sources in the future.

  1. The data dictionary: A view into the CTBT knowledge base

    SciTech Connect (OSTI)

    Shepherd, E.R.; Keyser, R.G.; Armstrong, H.M.

    1997-08-01

    The data dictionary for the Comprehensive Test Ban Treaty (CTBT) knowledge base provides a comprehensive, current catalog of the projected contents of the knowledge base. It is written from a data definition view of the knowledge base and therefore organizes information in a fashion that allows logical storage within the computer. The data dictionary introduces two organization categories of data: the datatype, which is a broad, high-level category of data, and the dataset, which is a specific instance of a datatype. The knowledge base, and thus the data dictionary, consist of a fixed, relatively small number of datatypes, but new datasets are expected to be added on a regular basis. The data dictionary is a tangible result of the design effort for the knowledge base and is intended to be used by anyone who accesses the knowledge base for any purpose, such as populating the knowledge base with data, or accessing the data for use with automatic data processing (ADP) routines, or browsing through the data for verification purposes. For these two reasons, it is important to discuss the development of the data dictionary as well as to describe its contents to better understand its usefulness; that is the purpose of this paper.

  2. Biogas From Municipal WWTPs: Fuel Cells Viewed as a Value Proposition...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    as a Value Proposition Biogas From Municipal WWTPs: Fuel Cells Viewed as a Value Proposition Presentation about the value proposition for biogas from waste water treatment plants. ...

  3. T-643: HP OpenView Storage Data Protector Unspecified Code Execution Vulnerability

    Broader source: Energy.gov [DOE]

    A vulnerability has been reported in HP OpenView Storage Data Protector, which can be exploited by malicious people to compromise a vulnerable system.

  4. T-538: HP OpenView Storage Data Protector Bug Lets Remote Users Execute Arbitrary Code

    Broader source: Energy.gov [DOE]

    A vulnerability was reported in HP OpenView Storage Data Protector. A remote user can execute arbitrary code on the target system.

  5. Biogas From Municipal WWTPs: Fuel Cells Viewed as a Value Proposition

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    From Municipal WWTPs Fuel Cells Viewed as a Value Proposition Biogas and Fuel Cells Workshop National Renewable Energy Laboratory Golden, Colorado June 12, 2012 WWTP Anaerobic ...

  6. Prairie View A&M University | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Prairie View A&M University Prairie View A&M University, Historically Black College and University (HBCU) Professor Tian-sen Huang The Prairie View Plasma Lab (PVPL) is the only fusion plasma lab operated at an HBCU, and a major research and education laboratory at Prairie View A&M University (PVAMU). The lab has two rotamak devices supported by two 500kHz/400 kW rf generators to operate a rotating magnetic field drive-FRC plasma. Since PVPL 2001, PPPL/OSUR provided significant

  7. Narrow Field of View Zenith Radiometer (NFOV) Handbook (Technical...

    Office of Scientific and Technical Information (OSTI)

    With a one-second sampling rate of the NFOV2, faster than almost any other ARM Climate Research Facility (ACRF) instrument, we are able, for the first time, to capture changes in ...

  8. Clinical, Laboratorial, and Urodynamic Findings of Prostatic Artery Embolization for the Treatment of Urinary Retention Related to Benign Prostatic Hyperplasia. A Prospective Single-Center Pilot Study

    SciTech Connect (OSTI)

    Antunes, Alberto A.; Carnevale, Francisco C. Motta Leal Filho, Joaquim M. da; Yoshinaga, Eduardo M.; Cerri, Luciana M. O.; Baroni, Ronaldo H.; Marcelino, Antonio S. Z.; Cerri, Giovanni G.; Srougi, Miguel

    2013-08-01

    PurposeThis study was designed to describe the clinical, laboratorial, and urodynamic findings of prostatic artery embolization (PAE) in patients with urinary retention due to benign prostatic hyperplasia (BPH).MethodsA prospective study of 11 patients with urinary retention due to BPH was conducted. Patients underwent physical examination, prostate specific antigen (PSA) measurement, transrectal ultrasound, and magnetic resonance imaging. International prostate symptom score (IPSS), quality of life (QoL), and urodynamic testing were used to assess the outcome before and after 1 year.ResultsClinical success was 91 % (10/11 patients) with a mean follow-up of 22.3 months (range, 12-41 months). At the first year follow-up, the mean IPSS score was 2.8 points (p = 0.04), mean QoL was 0.4 points (p = 0.001), mean PSA decreased from 10.1 to 4.3 ng/mL (p = 0.003), maximum urinary flow (Qmax) improved from 4.2 to 10.8 mL/sec (p = 0.009), and detrusor pressure (Pdet) decreased from 85.7 to 51.5 cm H{sub 2}O (p = 0.007). Before PAE, Bladder Outlet Obstruction Index (BOOI) showed values >40 in 100 % of patients. After PAE, 30 % of patients were >40 (obstructed), 40 % were between 20 and 40 (undetermined), and 30 % were <20 (unobstructed). Patients with a BOOI <20 had higher PSA values at 1-day after PAE.ConclusionsClinical and urodynamic parameters improved significantly after PAE in patients with acute urinary retention due to BPH. Total PSA at day 1 after PAE was higher in patients with unobstructed values in pressure flow studies.

  9. SLH Timing Belt Powertrain

    SciTech Connect (OSTI)

    Schneider, Abe

    2014-04-09

    The main goal of this proposal was to develop and test a novel powertrain solution for the SLH hydroEngine, a low-cost, efficient low-head hydropower technology. Nearly two-thirds of U.S. renewable electricity is produced by hydropower (EIA 2010). According to the U.S. Department of Energy; this amount could be increased by 50% with small hydropower plants, often using already-existing dams (Hall 2004). There are more than 80,000 existing dams, and of these, less than 4% generate power (Blankinship 2009). In addition, there are over 800 irrigation districts in the U.S., many with multiple, non-power, low-head drops. These existing, non-power dams and irrigation drops could be retrofitted to produce distributed, baseload, renewable energy with appropriate technology. The problem is that most existing dams are low-head, or less than 30 feet in height (Ragon 2009). Only about 2% of the available low-head hydropower resource in the U.S. has been developed, leaving more than 70 GW of annual mean potential low-head capacity untapped (Hall 2004). Natel Energy, Inc. is developing a low-head hydropower turbine that operates efficiently at heads less than 6 meters and is cost-effective for deployment across multiple low-head structures. Because of the unique racetrack-like path taken by the prime-movers in the SLH, a flexible powertrain is required. Historically, the only viable technological solution was roller chain. Despite the having the ability to easily attach blades, roller chain is characterized by significant drawbacks, including high cost, wear, and vibration from chordal action. Advanced carbon- fiber-reinforced timing belts have been recently developed which, coupled with a novel belt attachment system developed by Natel Energy, result in a large reduction in moving parts, reduced mass and cost, and elimination of chordal action for increased fatigue life. The work done in this project affirmatively addressed each of the following 3 major uncertainties concerning

  10. Real-Time Benchmark Suite

    Energy Science and Technology Software Center (OSTI)

    1992-01-17

    This software provides a portable benchmark suite for real time kernels. It tests the performance of many of the system calls, as well as the interrupt response time and task response time to interrupts. These numbers provide a baseline for comparing various real-time kernels and hardware platforms.

  11. Real time capable infrared thermography for ASDEX Upgrade

    SciTech Connect (OSTI)

    Sieglin, B. Faitsch, M.; Herrmann, A.; Brucker, B.; Eich, T.; Kammerloher, L.; Martinov, S.

    2015-11-15

    Infrared (IR) thermography is widely used in fusion research to study power exhaust and incident heat load onto the plasma facing components. Due to the short pulse duration of today’s fusion experiments, IR systems have mostly been designed for off-line data analysis. For future long pulse devices (e.g., Wendelstein 7-X, ITER), a real time evaluation of the target temperature and heat flux is mandatory. This paper shows the development of a real time capable IR system for ASDEX Upgrade. A compact IR camera has been designed incorporating the necessary magnetic and electric shielding for the detector, cooler assembly. The camera communication is based on the Camera Link industry standard. The data acquisition hardware is based on National Instruments hardware, consisting of a PXIe chassis inside and a fibre optical connected industry computer outside the torus hall. Image processing and data evaluation are performed using real time LabVIEW.

  12. Most Viewed Documents - Energy Storage, Conversion, and Utilization | OSTI,

    Office of Scientific and Technical Information (OSTI)

    US Dept of Energy Office of Scientific and Technical Information - Energy Storage, Conversion, and Utilization Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) Continuously variable transmissions: theory and practice Beachley, N.H.; Frank, A.A. () Review of air flow measurement techniques McWilliams, Jennifer (2002) Building a secondary containment system Broder, M.F. (1994) Cost benefit analysis of the night-time ventilative cooling in

  13. Nagios Down-Time scripts

    SciTech Connect (OSTI)

    Buddeberg, Patrick

    2014-11-11

    The Nagios Down-Time scripts are a set of Python scripts that create a commandline interface to Nagios' scheduled down-times. This allows for large-scale management of down-times, beyond what is feasible with the default web interface. Additionally, one of the scripts can be setup to periodically send emails of down-times that are scheduled to end within a specified amount of time after the script has been run; for example, it could run once a day and send an email including down-times ending within the next 24 hours.

  14. Nagios Down-Time scripts

    Energy Science and Technology Software Center (OSTI)

    2014-11-11

    The Nagios Down-Time scripts are a set of Python scripts that create a commandline interface to Nagios' scheduled down-times. This allows for large-scale management of down-times, beyond what is feasible with the default web interface. Additionally, one of the scripts can be setup to periodically send emails of down-times that are scheduled to end within a specified amount of time after the script has been run; for example, it could run once a day andmore » send an email including down-times ending within the next 24 hours.« less

  15. Characterization of Flow Paths, Residence Time and Media Chemistry in Complex Landscapes to Integrate Surface, Groundwater and Stream Processes and Inform Models of Hydrologic and Water Quality Response to Land Use Activities; Savannah River Site

    SciTech Connect (OSTI)

    Bitew, Menberu; Jackson, Rhett

    2015-02-01

    The objective of this report is to document the methodology used to calculate the three hydro-geomorphic indices: C Index, Nhot spot, and Interflow Contributing Area (IFC Area). These indices were applied in the Upper Four Mile Creek Watershed in order to better understand the potential mechanisms controlling retention time, path lengths, and potential for nutrient and solute metabolism and exchange associated with the geomorphic configurations of the upland contributing areas, groundwater, the riparian zone, and stream channels.

  16. October 2008 Y-12 Times

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ray Smith Donna Watson Lisa Xiques times times the B&W Technical Services Y-12, LLC, a partnership between Babcock & Wilcox Technical Services Group Inc. and Bechtel National Inc., ...

  17. Charging Your Time - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Health & Safety Exposition Charging Your Time About Us Hanford Cultural Resources Charging Your Time Committee Members Contact Us Electronic Registration Form Exhibitor and Vendor Information EXPO 2016 Sponsors EXPO Award Criteria How to Get to TRAC Special Events What is EXPO Why Should I Participate in EXPO Charging Your Time Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size How Do I Charge My Time Spent at EXPO? Each Hanford Prime Contractor may have

  18. View TEDxCERN in Jefferson Lab Auditorium on Sept. 24 | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    View TEDxCERN in Jefferson Lab Auditorium on Sept. 24 View TEDxCERN in Jefferson Lab Auditorium on Sept. 24 NEWPORT NEWS, Va. - Jefferson Lab will stream TEDxCERN 2014 on the big screen in the CEBAF Center auditorium on Sept. 24, from 7:30 a.m. - 1:30 p.m. EDT. University and college faculty and students affiliated with Jefferson Lab are invited to attend all or any part of the event viewing. TED talks are brief conversations - each lasting 18 minutes or less - that bring together people from

  19. Systems and methods for maintaining multiple objects within a camera field-of-view

    DOE Patents [OSTI]

    Gans, Nicholas R.; Dixon, Warren

    2016-03-15

    In one embodiment, a system and method for maintaining objects within a camera field of view include identifying constraints to be enforced, each constraint relating to an attribute of the viewed objects, identifying a priority rank for the constraints such that more important constraints have a higher priority that less important constraints, and determining the set of solutions that satisfy the constraints relative to the order of their priority rank such that solutions that satisfy lower ranking constraints are only considered viable if they also satisfy any higher ranking constraints, each solution providing an indication as to how to control the camera to maintain the objects within the camera field of view.

  20. DOE Tour of Zero: Marine Drive by Clifton View Homes | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Marine Drive by Clifton View Homes DOE Tour of Zero: Marine Drive by Clifton View Homes 1 of 10 Clifton View Homes built this 2,408-square-foot zero energy home in Coupeville, Washington, to the performance criteria of the U.S. Department of Energy Zero Energy Ready Home (ZERH) program. 2 of 10 The ultra-efficient home has 7.84 kW of solar electric panels on the roof, which contribute to zero utility bills for the homeowners. The roof is built with structural insulated panels (SIPs) that are