Powered by Deep Web Technologies
Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Utility Green Pricing Programs: Design, Implementation, and Consumer Response  

DOE Green Energy (OSTI)

The term green pricing refers to programs offered by utilities in traditionally regulated electricity markets, which allow customers to support the development of renewable energy sources by paying a small premium on their electric bills. Since the introduction of the concept in the United States, the number of unique utility green pricing programs has expanded from just a few programs in 1993 to more than 90 in 2002. About 10% of U.S. utilities offered a green pricing option to about 26 million consumers by the end of 2002. This report provides: (1) aggregate industry data on consumer response to utility programs, which indicate the collective impact of green pricing on renewable energy development nationally; and (2) market data that can be used by utilities as a benchmark for gauging the relative success of their green pricing programs. Specifically, the paper presents current data and trends in consumer response to green pricing, as measured by renewable energy sales, participants, participation rates, and new renewable energy capacity supported. It presents data on various aspects of program design and implementation, such as product pricing, ownership of supplies, retention rates, marketing costs, the effectiveness of marketing techniques, and methods of enrolling and providing value to customers.

Bird, L.; Swezey, B.; Aabakken, J.

2004-02-01T23:59:59.000Z

2

Demand Response Program Design and Implementation Case Study...  

NLE Websites -- All DOE Office Websites (Extended Search)

Delurey, Dan, and J. Schwartz Date Published 022013 Keywords demand response research, demand side resources: policy, electricity markets, electricity markets and policy group,...

3

Blocking response surface designs  

Science Conference Proceedings (OSTI)

The design of experiments involving more than one blocking factor and quantitative explanatory variables is discussed, the focus being on two key aspects of blocked response surface designs: optimality and orthogonality. First, conditions for orthogonally ... Keywords: D-optimality, Exchange algorithm, Fixed blocks, Orthogonality, Random blocks

P. Goos; A. N. Donev

2006-11-01T23:59:59.000Z

4

Programmed design of ship forms  

Science Conference Proceedings (OSTI)

This paper describes a new category of CAD applications devoted to the definition and parameterization of hull forms, called programmed design. Programmed design relies on two prerequisites. The first one is a product model with a variety of types large ... Keywords: CAD language, Hull form, Parametric design, Product model, Programmed design

A. Rodríguez; L. Fernández-Jambrina

2012-07-01T23:59:59.000Z

5

Demand Response Programs, 6. edition  

Science Conference Proceedings (OSTI)

The report provides a look at the past, present, and future state of the market for demand/load response based upon market price signals. It is intended to provide significant value to individuals and companies who are considering participating in demand response programs, energy providers and ISOs interested in offering demand response programs, and consultants and analysts looking for detailed information on demand response technology, applications, and participants. The report offers a look at the current Demand Response environment in the energy industry by: defining what demand response programs are; detailing the evolution of program types over the last 30 years; discussing the key drivers of current initiatives; identifying barriers and keys to success for the programs; discussing the argument against subsidization of demand response; describing the different types of programs that exist including:direct load control, interruptible load, curtailable load, time-of-use, real time pricing, and demand bidding/buyback; providing examples of the different types of programs; examining the enablers of demand response programs; and, providing a look at major demand response programs.

NONE

2007-10-15T23:59:59.000Z

6

Better Buildings Neighborhood Program: Step 4: Design the Financing Program  

NLE Websites -- All DOE Office Websites (Extended Search)

: Design : Design the Financing Program to someone by E-mail Share Better Buildings Neighborhood Program: Step 4: Design the Financing Program on Facebook Tweet about Better Buildings Neighborhood Program: Step 4: Design the Financing Program on Twitter Bookmark Better Buildings Neighborhood Program: Step 4: Design the Financing Program on Google Bookmark Better Buildings Neighborhood Program: Step 4: Design the Financing Program on Delicious Rank Better Buildings Neighborhood Program: Step 4: Design the Financing Program on Digg Find More places to share Better Buildings Neighborhood Program: Step 4: Design the Financing Program on AddThis.com... Getting Started Driving Demand Financing Assess the Market Define Finance Program Objectives Identify & Engage Financial Partners

7

To: University administrators responsible for code of conduct and licensing issues From: The Members of the Designated Suppliers Program (DSP) Working Group  

E-Print Network (OSTI)

: The Members of the Designated Suppliers Program (DSP) Working Group Date: September 29, 2006 Re: Revisions to the DSP The Designated Suppliers Program (DSP) Working Group has been meeting since March of this year articulated support for the DSP and expressed a commitment to work together to move the program forward

Holsinger, Kent

8

Utility Green Pricing Programs: Design, Implementation, and Consumer...  

NLE Websites -- All DOE Office Websites (Extended Search)

Green Pricing Programs: Design, Implementation, and Consumer Response February 2004 * NRELTP-620-35618 Lori Bird, Blair Swezey, and Jrn Aabakken National Renewable Energy...

9

Federal Energy Management Program: Product Designation Process  

NLE Websites -- All DOE Office Websites (Extended Search)

Product Product Designation Process to someone by E-mail Share Federal Energy Management Program: Product Designation Process on Facebook Tweet about Federal Energy Management Program: Product Designation Process on Twitter Bookmark Federal Energy Management Program: Product Designation Process on Google Bookmark Federal Energy Management Program: Product Designation Process on Delicious Rank Federal Energy Management Program: Product Designation Process on Digg Find More places to share Federal Energy Management Program: Product Designation Process on AddThis.com... Energy-Efficient Products Federal Requirements Covered Product Categories Product Designation Process Low Standby Power Energy & Cost Savings Calculators Model Acquisitions Language Working Group Resources

10

Residential Retrofit Program Design Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

Technical Assistance Program Technical Assistance Program Residential Retrofit Program Design Guide May 2011 This work has been performed by the Vermont Energy Investment Corporation (VEIC) and Energy Futures Group (EFG), under the Contract No. 4200000341 with Oak Ridge National Laboratory which is managed by UT-Battelle, LLC under Contract with the US Department of Energy No. DE-AC05-00OR22725. This document was prepared in collaboration with a partnership of companies under this contract. The partnership is led by the Vermont Energy Investment Corporation (VEIC), and includes the following companies: American Council for an Energy Efficient Economy (ACEEE), Energy Futures Group (EFG), Midwest Energy Efficiency Alliance (MEEA), Northwest Energy Efficiency Alliance (NEEA), Northeast Energy Efficiency Partnership (NEEP), Natural

11

Good, Better, Best: Designing a Designation Program for Solar | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Good, Better, Best: Designing a Designation Program for Solar Good, Better, Best: Designing a Designation Program for Solar Good, Better, Best: Designing a Designation Program for Solar December 4, 2012 - 4:00pm Addthis The Energy Department is gathering input on solar designation programs that could one day help consumers recognize the best products and services that the solar industry has to offer. | Photo by Dennis Schroeder/NREL. The Energy Department is gathering input on solar designation programs that could one day help consumers recognize the best products and services that the solar industry has to offer. | Photo by Dennis Schroeder/NREL. Minh Le Minh Le Program Manager, Solar Program How can I participate? To provide input for the Designation Program for Solar Energy Stakeholders Request for Information (RFI), submit your feedback.

12

Responsive design in Windows 8 applications.  

E-Print Network (OSTI)

?? Responsive design is a common expression at the web today. This thesis was about learning about responsive web design in order to apply it… (more)

Klockare, Sofi

2013-01-01T23:59:59.000Z

13

Design Assistance Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Assistance Program Design Assistance Program Design Assistance Program < Back Eligibility Commercial Construction Industrial Installer/Contractor Multi-Family Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Sealing Your Home Cooling Manufacturing Other Heat Pumps Appliances & Electronics Commercial Lighting Lighting Insulation Design & Remodeling Water Heating Windows, Doors, & Skylights Solar Program Info Funding Source Focus On Energy Program State Wisconsin Program Type State Rebate Program Rebate Amount Design: $0.012 - $0.015/kWh saved Construction: $0.09/kWh saved and $0.55/therm saved Provider Focus on Energy The Focus on Energy Design Assistance Program provides design professionals, builders and developers of new buildings with whole building

14

EMERGENCY RESPONSE ORGANIZATION TRAINING PROGRAM DESCRIPTION  

SciTech Connect

This document establishes requirements for Emergency Response Organization Training. This program description applies to all Project Hanford Management Contract (PHMC) contractor and subcontractor employees who are identified to fulfill Hanford Site Emergency Response Organization (ERO) positions.

MITCHELL, L.J.

2001-06-20T23:59:59.000Z

15

The Programmer's Apprentice: A Program Design Scenario  

E-Print Network (OSTI)

A scenario is used to illustrate the capabilities of a proposed Design Apprentice, focussing on the area of detailed, low-level design. Given a specification, the Design Apprentice will be able to make many of the design decisions needed to synthesize the required program. The Design Apprentice will also be able to detect various kinds of contradictions and omissions in a specifica- tion.

Charles Rich; Richard C. Waters

1987-01-01T23:59:59.000Z

16

GCFR shielding design and supporting experimental programs  

SciTech Connect

The shielding for the conceptual design of the gas-cooled fast breeder reactor (GCFR) is described, and the component exposure design criteria which determine the shield design are presented. The experimental programs for validating the GCFR shielding design methods and data (which have been in existence since 1976) are also discussed.

Perkins, R.G.; Hamilton, C.J.; Bartine, D.

1980-05-01T23:59:59.000Z

17

Conceptual design. Final report: TFE Verification Program  

DOE Green Energy (OSTI)

This report documents the TFE Conceptual Design, which provided the design guidance for the TFE Verification program. The primary goals of this design effort were: (1) establish the conceptual design of an in-core thermionic reactor for a 2 Mw(e) space nuclear power system with a 7-year operating lifetime; (2) demonstrate scalability of the above concept over the output power range of 500 kW(e) to 5 MW(e); and (3) define the TFE which is the basis for the 2 MW (e) reactor design. This TFE specification provided the basis for the test program. These primary goals were achieved. The technical approach taking in the conceptual design effort is discussed in Section 2, and the results are discussed in Section 3. The remainder of this introduction draws a perspective on the role that this conceptual design task played in the TFE Verification Program.

Not Available

1994-03-01T23:59:59.000Z

18

Lighting program design: New opportunities for profits  

SciTech Connect

The increased activity by State`s to adopt codes and standards is creating new challenges for the design and implementation of lighting programs for commercial new construction. The regulatory environment is also requiring that transaction costs are minimized for these programs. Recent work done by the Illuminating Engineers Society for the new ASHRA-E/IES Standard 90.1-1989R provides a new technical basis for the development of component based lighting programs. Component based programs offer advantages over design assistance programs. They include the ease of marketing, higher market penetration rate, and the promotion of specific cost-effective technologies. The proposed approach also overcomes problems with current component based programs including defining the baseline, free ridership, and difficulties in performing impact evaluations. By addressing these problems, lighting programs for new buildings will continue to be one of the most cost-effective new construction programs for most utilities. The basic concept is to combine two activities that are shaping the national energy picture into a program design strategy. The national activities are the Energy Policy Act of 1992 and the development of the next generation of ASHRAE/IES Standard 90.1. The approach uses the prescriptive criteria in Standard 90.1 to develop savings thresholds for program participation. The savings thresholds are then associated with lighting component technologies to determine eligibility criteria for each component. Combining the prescriptive criteria with component savings is the key to the approach.

Johnson, J.A.; Jones, C.C.

1995-03-01T23:59:59.000Z

19

Program design in file structures [by students  

Science Conference Proceedings (OSTI)

The importance of emphasizing design in programming stems from the desire to train students in thinking more about solving the problem than programming the problem. Although sitting in front of the computer causes the student to think that he or she ...

S. A. Mengel; D. A. Tappan

1995-11-01T23:59:59.000Z

20

Program Led by EM's Carlsbad Field Office Joins Emergency Response...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Led by EM's Carlsbad Field Office Joins Emergency Response in National Exercise Program Led by EM's Carlsbad Field Office Joins Emergency Response in National Exercise...

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Designing Industrial DSM Programs that Work  

E-Print Network (OSTI)

There are many reasons why industrial customers do not implement all cost-effective efficiency measures on their own. Utility demand side management (DSM) programs can help overcome some of these barriers. DSM programs provide an opportunity for utilities to reduce the cost of providing energy services while helping customers to reduce their energy bills and thereby increase profit margins and competitiveness. A review of utility experience with industrial DSM programs shows that some types of programs work much better than other types. Successful efforts include both custom and prescriptive components that show an understanding of the customers perspective, use marketing that is personal and user-friendly, provide flexibility, and include financial incentives. Among the less successful programs are programs that do not address customer needs, including information-only, loan, and shared savings programs. A number of other program approaches are largely untested and merit further experimentation. Based on these findings, we recommend that utilities and industrial customers work together to design DSM programs that serve the needs of industrial customers.

Nadel, S. M.; Jordan, J. A.

1994-04-01T23:59:59.000Z

22

Designing Environmentally Safe Refrigerants Using Mathematical Programming  

E-Print Network (OSTI)

Computer aided molecular design is a strategy in which a set of structural groups are systematically combined to form molecules with desired properties. In this paper, a mathematical programming based approach to computer aided molecular design is presented. Using a set of structural groups, the problem is formulated as a mixed integer nonlinear program in which discrete variables represent the number of each type of structural groups present in the candidate compound. The augmentedpenalty /outer-approximation algorithm is used to solve the MINLP to obtain compound(s) with an optimum value of an appropriate performance index such that molecular structural constraints, physical property constraints and process design limitations are met. With the current renewed interest in the environment, the suggested approach is applied to refrigerant design with an environmental constraint. The results indicate the viability of this approach. INTRODUCTION The chemical industry is constantly explo...

Amit P. Duvedi; Luke E. K. Achenie; Copyright Amit Duvedi; Luke Achenie

1996-01-01T23:59:59.000Z

23

Sustainable Design | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainable Design Sustainable Design Session 5 of a seven-part webcast series presented by the Department of Energy's Federal Energy Management Program to help federal agencies comply with the requirements of ASHRAE Standard 90.1-2004. The Sustainable Design webcast provides an overview of sustainable design federal requirements and strategies. Sustainable design principles and practices are well established and can be applied at some level to any project to reduce the environmental impact and operational cost of a building, while increasing occupant satisfaction. The requirements within Executive Order 13423, the Energy Policy Act of 2005, and the Energy Independence and Security Act of 2007 are driving the federal sector to be leaders in sustainable design. Estimated Length:

24

Policy and Program Design Toolkit | Open Energy Information  

Open Energy Info (EERE)

Policy and Program Design Toolkit Policy and Program Design Toolkit (Redirected from Gateway:International/Policy and Program Design) Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other

25

Valve test program: response to TMI  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute (EPRI) pressurized-water reactor (PWR) safety and relief valve test program was speedily organized to assess valve operability after a pressurizer relief valve malfunctioned at Three Mile Island (TMI). Comprehensive full-scale testing at several facilities validated the basic designs in use today. 2 figures.

Lihach, N.; Bilanin, W.; Carey, J.

1983-05-01T23:59:59.000Z

26

Comprehensive environmental assessment and response program  

Science Conference Proceedings (OSTI)

The US Department of Energy's (USDOE) Albuquerque Operations Office installations are being evaluated under its Comprehensive Environmental Assessment and Response program (CEARP). The installations consist of eight weapons development and production facilities, which are located across the United States. The evaluation covers the major environmental regulations, with emphasis on the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) and on the Resource Conservation and Recovery Act (RCRA). The CEARP is intended to help fulfill USDOE obligations for federal facilities under the US Environmental Protection Agency (CERCLA Program and constitutes the same basic approach as contained in USEPA guidance to federal facilities. The Program is a phased program to identify, assess, and correct existing and potential environmental concerns relative to these regulations. The five phases are Phase I - Installation Assessment, Phase II - Confirmation, Phase III - Technological Assessment, Phase IV - Remedial Action, and Phase V - Compliance and Verification. Phase I activities and reports should be completed during 1986. The Phase II generic sampling plans, data management plans, health and safety plans, and quality assurance/quality control plans will be prepared during 1986. Significant characterization of CERCLA sites will be initiated during 1987.

Gunderson, T.C.; Vocke, R.W.; Stoker, A.K.

1986-01-01T23:59:59.000Z

27

Federal Energy Management Program: Business Case for Sustainable Design in  

NLE Websites -- All DOE Office Websites (Extended Search)

Business Case for Business Case for Sustainable Design in Federal Facilities to someone by E-mail Share Federal Energy Management Program: Business Case for Sustainable Design in Federal Facilities on Facebook Tweet about Federal Energy Management Program: Business Case for Sustainable Design in Federal Facilities on Twitter Bookmark Federal Energy Management Program: Business Case for Sustainable Design in Federal Facilities on Google Bookmark Federal Energy Management Program: Business Case for Sustainable Design in Federal Facilities on Delicious Rank Federal Energy Management Program: Business Case for Sustainable Design in Federal Facilities on Digg Find More places to share Federal Energy Management Program: Business Case for Sustainable Design in Federal Facilities on

28

Design principles of coordinated multi-incident emergency response systems  

Science Conference Proceedings (OSTI)

Emergency response systems play an important role in homeland security nowadays. Despite this, research in the design of emergency response systems is lacking. An effective design of emergency response system involves multi-disciplinary design considerations. ...

Rui Chen; Raj Sharman; H. Raghav Rao; Shambhu Upadhyaya

2005-05-01T23:59:59.000Z

29

State Energy Efficiency Design Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Efficiency Design Program Energy Efficiency Design Program State Energy Efficiency Design Program < Back Eligibility State Government Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Program Info State Oregon Program Type Energy Standards for Public Buildings Provider Oregon Department of Energy Oregon's State Energy Efficiency Design Program (SEED) was originally established in 1991. This program, codified in state law, directs state agencies to work with the Oregon Department of Energy to ensure cost-effective energy conservation measures (ECMs) are included in new construction projects and major renovations to public buildings. Leased buildings are also required to be more energy efficient.

30

Price-Responsive Load (PRL) Program - Framing Paper No.1  

SciTech Connect

By definition, effective and efficient competitive markets need a supply side and a demand side. One criticism of electric restructuring efforts in many states is that most of the attention has been focused on the supply side, in a market focused on the short term. In general, the demand side of the market has been under-addressed. The objective of the New England Demand Response Initiative (NEDRI) is to develop a comprehensive, coordinated set of demand response programs for the New England regional power markets. NEDRI aims to maximize the capability of demand response to compete in the wholesale market and to improve the economic efficiency and environmental profile of the electric sector. To those ends, NEDRI is focusing its efforts in four interrelated areas: (1) ISO-level reliability programs, (2) Market-based price-responsive load programs, (3) Demand response at retail through pricing, rate design, and advanced metering, and (4) End-use energy efficiency resources as demand response. The fourth area, energy efficiency, is the subject of this framing paper. Energy efficiency reduces the energy used by specific end-use devices and systems, typically without affecting the level of service and without loss of amenity. Energy savings and peak load reductions are achieved by substituting technically more advanced equipment, processes, or operational strategies to produce the same or an improved level of end-use service with less electricity. In contrast, load management programs lower peak demand during specific, limited time periods by either (1) influencing the timing of energy use by shifting load to another time period, or (2) reducing the level of energy use by curtailing or interrupting the load, typically with some loss of service or amenity.

Goldman, Charles A.

2002-03-01T23:59:59.000Z

31

Generating Parallel Programs from the Wavefront Design Pattern  

Science Conference Proceedings (OSTI)

Object-oriented programming, design patterns, and frameworks are common techniques that have been used to reduce the complexity of sequential programming. We have applied these techniques to the more difficult domain of parallel programming. This paper ...

John Anvik; Steve MacDonald; Duane Szafron; Jonathan Schaeffer; Steven Bromling; Kai Tan

2002-04-01T23:59:59.000Z

32

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Design...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SYSTEMS ENGINEERING PROGRAM: Requirements Management Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Project Tracking Checklist Energy.gov Careers & Internships Policy &...

33

Design and Operation of an Open, Interoperable Automated Demand Response  

NLE Websites -- All DOE Office Websites (Extended Search)

Design and Operation of an Open, Interoperable Automated Demand Response Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings Title Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings Publication Type Journal Article LBNL Report Number LBNL-2340e Year of Publication 2009 Authors Piette, Mary Ann, Girish Ghatikar, Sila Kiliccote, David S. Watson, Edward Koch, and Dan Hennage Journal Journal of Computing Science and Information Engineering Volume 9 Issue 2 Keywords communication and standards, market sectors, openadr Abstract This paper describes the concept for and lessons from the development and field-testing of an open, interoperable communications infrastructure to support automated demand response (auto-DR). Automating DR allows greater levels of participation, improved reliability, and repeatability of the DR in participating facilities. This paper also presents the technical and architectural issues associated with auto-DR and description of the demand response automation server (DRAS), the client/server architecture-based middle-ware used to automate the interactions between the utilities or any DR serving entity and their customers for DR programs. Use case diagrams are presented to show the role of the DRAS between utility/ISO and the clients at the facilities.

34

Federal Energy Management Program: FEMP Designated Product: Water-Cooled  

NLE Websites -- All DOE Office Websites (Extended Search)

FEMP Designated FEMP Designated Product: Water-Cooled Ice Machines to someone by E-mail Share Federal Energy Management Program: FEMP Designated Product: Water-Cooled Ice Machines on Facebook Tweet about Federal Energy Management Program: FEMP Designated Product: Water-Cooled Ice Machines on Twitter Bookmark Federal Energy Management Program: FEMP Designated Product: Water-Cooled Ice Machines on Google Bookmark Federal Energy Management Program: FEMP Designated Product: Water-Cooled Ice Machines on Delicious Rank Federal Energy Management Program: FEMP Designated Product: Water-Cooled Ice Machines on Digg Find More places to share Federal Energy Management Program: FEMP Designated Product: Water-Cooled Ice Machines on AddThis.com... Energy-Efficient Products Federal Requirements

35

DOE Technical Standards Program Overview and Responsibilities, TSPP-1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-TSPP-1-2013 DOE-TSPP-1-2013 DOE TECHNICAL STANDARDS September 2013 PROGRAM PROCEDURES DOE TECHNICAL STANDARDS PROGRAM OVERVIEW AND RESPONSIBILITIES U.S. Department of Energy Office of Nuclear Safety Washington, D.C. 2058 DOE-TSPP-1-2013 Overview and Responsibilities September 2013 DOE Technical Standards Program CONTENTS 1. SCOPE ............................................................................................................................................ 1 1.1 Purpose ....................................................................................................................... 1 1.2 Applicability ................................................................................................................. 1 2. PROGRAM OVERVIEW ................................................................................................................. 1

36

Challenges in designing interactive systems for emergency response  

Science Conference Proceedings (OSTI)

This paper presents research on participatory design of interactive systems for emergency response. We present the work by going through the design method with a focus on the new elements that we developed for the participatory design toolkit, in particular ... Keywords: design visions, emergency response, palpable computing, participatory design, prototyping, ubiquitous computing

Morten Kyng; Esben Toftdahl Nielsen; Margit Kristensen

2006-06-01T23:59:59.000Z

37

End-user mashup programming: through the design lens  

Science Conference Proceedings (OSTI)

Programming has recently become more common among ordinary end users of computer systems. We believe that these end-user programmers are not just coders but also designers, in that they interlace making design decisions with coding rather than treating ... Keywords: design, end-user programming, mashups

Jill Cao; Yann Riche; Susan Wiedenbeck; Margaret Burnett; Valentina Grigoreanu

2010-04-01T23:59:59.000Z

38

Constructing uniform designs: A heuristic integer programming method  

Science Conference Proceedings (OSTI)

In this paper, the wrap-around L"2-discrepancy (WD) of asymmetrical design is represented as a quadratic form, thus the problem of constructing a uniform design becomes a quadratic integer programming problem. By the theory of optimization, some theoretic ... Keywords: Quadratic integer programming, Simulated annealing, Uniform design, Wrap-around L2-discrepancy

Yong-Dao Zhou; Kai-Tai Fang; Jian-Hui Ning

2012-04-01T23:59:59.000Z

39

Responsible Asia Forest Trade (RAFT) Program | Open Energy Information  

Open Energy Info (EERE)

Responsible Asia Forest Trade (RAFT) Program Responsible Asia Forest Trade (RAFT) Program Jump to: navigation, search Name Responsible Asia Forest Trade (RAFT) Program Agency/Company /Organization U.S. Agency for International Development Sector Land Focus Area Forestry Topics Policies/deployment programs Resource Type Lessons learned/best practices Website http://www.responsibleasia.org Country Cambodia, China, Indonesia, Laos, Malaysia, Papua New Guinea, Thailand, Vietnam UN Region Central Asia, Eastern Asia, South-Eastern Asia References Responsible Asia Forest Trade (RAFT) Program[1] "The Responsible Asia Forestry and Trade (RAFT) is a five-year program funded by the U.S. Agency for International Development Regional Development Mission for Asia (USAID RDMA) in Bangkok. RAFT is managed by

40

The Programmer's Apprentice: A Program Design Scenario  

E-Print Network (OSTI)

A scenario is used to illustrate the capabilities of a proposed Design Apprentice, focussing on the area of detailed, low-level design. Given a specification, the Design Apprentice will be able to make many of the ...

Rich, Charles

1987-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Optimal Design of Electrical Machines: Mathematical Programming ...  

E-Print Network (OSTI)

for the same problem of the design of an electrical machine without slot. ... tion, inverse problem, design, electrical machine ..... trade-off situation arises.

42

Table-top training program design  

SciTech Connect

This handbook establishes general training program guidelines for training personnel in developing training for operation, maintenance, and technical support personnel at DOE nuclear facilities.

NONE

1995-04-01T23:59:59.000Z

43

Demand Response Programs Oregon Public Utility Commission  

E-Print Network (OSTI)

(at 97 deg. F) #12;Cool Keeper Unit Installation #12;Cool Keeper Test Shed Load Profile 3350 3400 3450 operating according to their 'Natural Duty Cycle' 93 o F Expected load profile w/o Cool Keeper intervention, Demand Side Management #12;Current Programs/Tariffs ­ Load Control Programs Cool Keeper, Utah (currently

44

Labs21 sustainable design programming checklist version 1.0  

SciTech Connect

This checklist of sustainable design objectives and strategies can be used in the programming and conceptual design phases of a laboratory project. It includes the following: (1) Brief descriptions of each objective and strategy. (2) Metrics for each objective. This checklist is primarily to be used by owners, architects and engineers during the programming and conceptual design phase of a project. It is especially appropriate for use in design charrettes. The strategies and metrics can be included as requirements in the programming document or can be identified for further analysis or consideration during the design development phase. This checklist is hierarchically organized into design areas, objectives for each design area, and strategies and metrics for each objective. The design areas generally correspond to the design areas of the LEED(TM) rating system from the U.S. Green Building Council.

Mathew, Paul; Greenberg, Steve

2005-01-07T23:59:59.000Z

45

Heterogeneous Responses to Water Conservation Programs: The Case of Residential Users in Los Angeles  

E-Print Network (OSTI)

on welfare of water conservation programs (compensatingHeterogeneous Responses to Water Conservation Programs: TheHeterogeneous responses to water conservations programs: the

Hanemann, W. Michael; Nauges, Celine

2005-01-01T23:59:59.000Z

46

A modular programming language for engineering design  

E-Print Network (OSTI)

We introduce a new universal model of computation called MDPL that generalizes other functional models like the lambda calculus and combinatory logic. This model leads naturally to a new type of programming language that ...

Coffee, Thomas Merritt

2008-01-01T23:59:59.000Z

47

Policy and Program Design Toolkit | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Policy and Program Design Toolkit Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country

48

Federal Energy Management Program: Energy Efficiency Design Standards for  

NLE Websites -- All DOE Office Websites (Extended Search)

Design Standards for New Federal Commercial and Multi-Family High-Rise Design Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings to someone by E-mail Share Federal Energy Management Program: Energy Efficiency Design Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings on Facebook Tweet about Federal Energy Management Program: Energy Efficiency Design Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings on Twitter Bookmark Federal Energy Management Program: Energy Efficiency Design Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings on Google Bookmark Federal Energy Management Program: Energy Efficiency Design Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings on Delicious

49

Design Reconstitution Program Plan and procedures for K Basins  

SciTech Connect

This document establishes a systematic program to establish, organize, and document the design basis and design requirement information for the K Basins where existing design information is inadequate. The Design Reconstitution Program involves identifying and retrieving design information from identified source documents; evaluating, verifying, and validating the design information; resolving discrepancies; regenerating missing critical design information; and preparing and issuing a summary document of the design information. Upon completion, the design requirements shall be evaluated with the facility as-found configuration to verify the adequacy of appropriate design requirements with the as-found configuration and to document and resolve any discovered discrepancies. Once the design requirement (design analysis, calculation, design basis) comparison is made and discrepancies resolved (dispositioned, implemented, and incorporated as required), the as-found condition of a drawing then becomes an as-built drawing that is released into the engineering release system. This as-built drawing is then the accurate accounting of the field configuration that is consistent with the design requirements (recovered through the design reconstitution program) and is used with high confidence to make valid engineering, operational, and maintenance decisions.

Laney, T.

1995-01-12T23:59:59.000Z

50

Hanford Site waste tank farm facilities design reconstitution program plan  

SciTech Connect

Throughout the commercial nuclear industry the lack of design reconstitution programs prior to the mid 1980`s has resulted in inadequate documentation to support operating facilities configuration changes or safety evaluations. As a result, many utilities have completed or have ongoing design reconstitution programs and have discovered that without sufficient pre-planning their program can be potentially very expensive and may result in end-products inconsistent with the facility needs or expectations. A design reconstitution program plan is developed here for the Hanford waste tank farms facility as a consequence of the DOE Standard on operational configuration management. This design reconstitution plan provides for the recovery or regeneration of design requirements and basis, the compilation of Design Information Summaries, and a methodology to disposition items open for regeneration that were discovered during the development of Design Information Summaries. Implementation of this plan will culminate in an end-product of about 30 Design Information Summary documents. These documents will be developed to identify tank farms facility design requirements and design bases and thereby capture the technical baselines of the facility. This plan identifies the methodology necessary to systematically recover documents that are sources of design input information, and to evaluate and disposition open items or regeneration items discovered during the development of the Design Information Summaries or during the verification and validation processes. These development activities will be governed and implemented by three procedures and a guide that are to be developed as an outgrowth of this plan.

Vollert, F.R.

1994-09-06T23:59:59.000Z

51

Federal Energy Management Program: Product Designation Process  

NLE Websites -- All DOE Office Websites (Extended Search)

Designation Process Training Available Graphic of the eTraining logo Energy-Efficient Federal Purchasing: This intermediate FEMP eTraining course offers hands-on learning on...

52

The Design of Multivariate Field Programs  

Science Conference Proceedings (OSTI)

Development of a methodology for the optimal placement of multivariate sensors as an aid in the design of geophysical field experiments is shown. The optimal placement methodology relies on spatial correlation estimates, interpolation error ...

Kenneth W. Johnson

1988-04-01T23:59:59.000Z

53

Designing a Demand Response Business Network for California  

NLE Websites -- All DOE Office Websites (Extended Search)

Designing a Demand Response Business Network for California Speaker(s): Ali Vojdani Date: March 8, 2005 - 12:00pm Location: Bldg. 90 The Demand Response Business Network (DRBizNet)...

54

ProgramTopics System & Application Design | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search A list of all pages that have property "ProgramTopics" with value "System & Application Design" ADVISOR (ADvanced VehIcle SimulatOR) + Carbon Dioxide...

55

Advanced Energy Design Guides | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Design Guides Session 6 of a seven-part webcast series presented by the U.S. Department of Energy's (DOE's) Federal Energy Management Program to help federal agencies comply...

56

SRPO Designation and Responsibilities | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Responsibilities.pdf More Documents & Publications Microsoft Word - GRS ReviewOMB White Paper - Real Property Right-sizing and Carbon Reduction August 7 2009 2.docx FRPC...

57

Advanced Turbine Systems (ATS) program conceptual design and product development  

SciTech Connect

Achieving the Advanced Turbine Systems (ATS) goals of 60% efficiency, single-digit NO{sub x}, and 10% electric power cost reduction imposes competing characteristics on the gas turbine system. Two basic technical issues arise from this. The turbine inlet temperature of the gas turbine must increase to achieve both efficiency and cost goals. However, higher temperatures move in the direction of increased NO{sub x} emission. Improved coatings and materials technologies along with creative combustor design can result in solutions to achieve the ultimate goal. GE`s view of the market, in conjunction with the industrial and utility objectives, requires the development of Advanced Gas Turbine Systems which encompass two potential products: a new aeroderivative combined-cycle system for the industrial market, and a combined-cycle system for the utility sector that is based on an advanced frame machine. The GE Advanced Gas Turbine Development program is focused on two specific products: (1) a 70 MW class industrial gas turbine based on the GE90 core technology utilizing an innovative air cooling methodology; (2) a 200 MW class utility gas turbine based on an advanced Ge heavy-duty machine utilizing advanced cooling and enhancement in component efficiency. Both of these activities required the identification and resolution of technical issues critical to achieving ATS goals. The emphasis for the industrial ATS was placed upon innovative cycle design and low emission combustion. The emphasis for the utility ATS was placed on developing a technology base for advanced turbine cooling, while utilizing demonstrated and planned improvements in low emission combustion. Significant overlap in the development programs will allow common technologies to be applied to both products. GE Power Systems is solely responsible for offering GE products for the industrial and utility markets.

1996-08-31T23:59:59.000Z

58

Purpose-designed Crop Plants for Biofuels BIOENERGY PROGRAM  

E-Print Network (OSTI)

Purpose-designed Crop Plants for Biofuels BIOENERGY PROGRAM The Texas AgriLife Research Center for the biofuels industry. This program recognizes that the ideal combination of traits required for an economically and energetically sustainable biofuels industry does not yet exist in a single plant spe- cies

59

HIPLEX-1: Experimental Design and Response Variables  

Science Conference Proceedings (OSTI)

The design and conduct of HIPLEX-1, a randomized seeding experiment carried out on small cumulus congestus clouds in eastern Montana, are outlined. The seeding agent was dry ice, introduced in an effort to produce microphysical effects, ...

Paul L. Smith; Arnett S. Dennis; Bernard A. Silverman; Arlin B. Super; Edmond W. Holroyd III; William A. Cooper; Paul W. Mielke Jr.; Kenneth J. Berry; Harold D. Orville; James R. Miller Jr.

1984-04-01T23:59:59.000Z

60

Designing PV Incentive Programs to Promote Performance: A Reviewof Current Practice  

SciTech Connect

Increasing levels of financial support for customer-sited photovoltaic (PV) systems, provided through publicly-funded incentive programs, has heightened concerns about the long-term performance of these systems. Given the barriers that customers face to ensuring that their PV systems perform well, and the responsibility that PV incentive programs bear to ensure that public funds are prudently spent, these programs should, and often do, play a critical role in ensuring that PV systems receiving incentives perform well. To provide a point of reference for assessing the current state of the art, and to inform program design efforts going forward, we examine the approaches to encouraging PV system performance used by 32 prominent PV incentive programs in the U.S. We identify eight general strategies or groups of related strategies that these programs have used to address performance issues, and highlight important differences in the implementation of these strategies among programs.

Barbose, Galen; Wiser, Ryan; Bolinger, Mark

2007-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Interactive computer program for optimal designs of longitudinal cohort studies  

Science Conference Proceedings (OSTI)

Many large scale longitudinal cohort studies have been carried out or are ongoing in different fields of science. Such studies need a careful planning to obtain the desired quality of results with the available resources. In the past, a number of researches ... Keywords: Cohort designs, Computer program, D-optimal, Longitudinal studies, Optimal design, Relative efficiency

Fetene B. Tekle; Frans E. S. Tan; Martijn P. F. Berger

2009-05-01T23:59:59.000Z

62

Improved Load Plan Design Through Integer Programming Based Local Search  

Science Conference Proceedings (OSTI)

We present integer programming models of the service network design problem faced by less-than-truckload LTL freight transportation carriers and a solution approach for the large-scale instances that result in practical applications. To accurately represent ... Keywords: freight transportation, heuristic search, network design

Alan Erera, Michael Hewitt, Martin Savelsbergh, Yang Zhang

2013-08-01T23:59:59.000Z

63

UNDERSTANDING AND DESIGNING ENERGY-EFFICIENCY PROGRAMS FOR DATA CENTERS  

NLE Websites -- All DOE Office Websites (Extended Search)

UNDERSTANDING AND DESIGNING UNDERSTANDING AND DESIGNING ENERGY-EFFICIENCY PROGRAMS FOR DATA CENTERS The U.S. Environmental Protection Agency (EPA) is providing this guide to help inform energy efficiency program administrators about opportunities to save energy in data centers, and to share emerging practices for program design and implementation based on the experiences of recent data center programs. WHY DATA CENTERS? Data centers consume up to 50 times the electricity of standard office space. 1 In 2010, between 1.7% and 2.2% of the total electricity use in the United States was consumed by data centers. United States data center electricity use nearly doubled between 2000 and 2005, and increased by approximately 36% between 2005 and 2010. Despite some recent efficiency gains, data centers remain a

64

Beyond Design Basis Events Analysis and Response Information | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Beyond Design Basis Events Analysis Beyond Design Basis Events Analysis and Response Information Beyond Design Basis Events Analysis and Response Information September 19-20, 2012 Beyond Design Basis Events Analysis and Response Information DOE's Safety Bulletin No. 2011-01, Events Beyond Design Safety Basis Analysis, March 2011 DOE's Nuclear Safety Workshop Newsletter, June 2011 2011 Nuclear Safety Workshop Presentations, June 2011 Transmittal Memorandum, Report on Review of Requirements and Capabilities for Analyzing and Responding to Beyond Design Basis Events, September 2011 Review of Requirements and Capabilities for Analyzing and Responding to Beyond Design Basis Events, August 2011 NRC Report - Recommendations for Enhancing Reactor Safety in the 21st Century; The Near-Term Task Force Review of Insights from the

65

Review of current Southern California edison load management programs and proposal for a new market-driven, mass-market, demand-response program  

Science Conference Proceedings (OSTI)

Utility load management programs, including direct load control and interruptible load programs, constitute a large installed base of controllable loads that are employed by utilities as system reliability resources. In response to energy supply shortfalls expected during the summer of 2001, the California Public Utilities Commission in spring 2001 authorized new utility load management programs as well as revisions to existing programs. This report provides an independent review of the designs of these new programs for a large utility (Southern California Edison) and suggests possible improvements to enhance the price responsiveness of the customer actions influenced by these programs. The report also proposes a new program to elicit a mass-market demand response to utility price signals.

Weller, G.H.

2002-01-01T23:59:59.000Z

66

Energy Efficiency Funds and Demand Response Programs - National Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Funds and Demand Funds and Demand Response Programs - National Overview Charles Goldman Lawrence Berkeley National Laboratory November 2, 2006 Federal Utility Partnership Working Group San Francisco CA Overview of Talk * National Overview * Energy Efficiency Programs and Funds * Demand Response Programs and Funds * FEMP Resources on Public Benefit Funds *Suggestions for Federal Customers DSM Spending is increasing! * 2006 Utility DSM and Public Benefit spending is ~$2.5B$ - $1B for C&I EE programs * CA utilities account for 35% of total spending 0.0 0.5 1.0 1.5 2.0 2.5 3.0 1994 2000 2005 2006 Costs (in billion $) DSM Costs Load Management Gas EE Other States Electric EE California Electric EE EE Spending in 2006 (by State) $ Million < 1 (23) 1 - 10 (2) 11 - 50 (13) 51 - 100 (7) > 100 (5) 790 101 257

67

Designing a Thermal Energy Storage Program for Electric Utilities  

E-Print Network (OSTI)

Electric utilities are looking at thermal energy storage technology as a viable demand side management (DSM) option. In order for this DSM measure to be effective, it must be incorporated into a workable, well-structured utility program. This paper describes a methodology to design a successful thermal energy storage program for electric utilities. The design process is addressed beginning with the market research phase. The research includes information obtained from utilities having successful thermal storage programs. In addition, information is gathered from interviews with local architects and engineers, air conditioning contractors and potential thermal energy storage customers. From this information a marketing plan is developed that addresses the target market, market penetration, promotional methods, incentive types and levels, internal and external training requirements and optimal organizational structure. The marketing plan also includes various rate structures, program procedures and evaluation techniques. In addition to the marketing plan, several case histories are addressed.

Niehus, T. L.

1994-01-01T23:59:59.000Z

68

FORMERLY USED SITES REMEDIAL ACTION PROGRAM DESIGNATION SUMMARY  

Office of Legacy Management (LM)

USED SITES USED SITES REMEDIAL ACTION PROGRAM DESIGNATION SUMMARY FOR ALBA CRAFT LABORATORY OXFORD, OHIO October 1, 1992 U.S. DEPARTMENT OF ENERGY OFFICE OF ENVIRONMENTAL RESTORATION Designation Summary Alba Craft Laboratory. Oxford CONTENTS INTRODUCTION .......... . . ..................... 1 BACKGROUND Site Function ......................... Site Description ..................... 1 Owner History ................. .. 2 Radiological History and Status............ 2 Authority Review .................... .. 3 DESIGNATION DETERMINATION ........ ....... 3 REFERENCES . ............ .... . 3 Designation Summary Alba Craft Laboratory, Oxford INTRODUCTION The Department of Energy (DOE), Office of Environmental Restoration, has reviewed the past activities of the Atomic Energy Commission (AEC) at the

69

Maximin D-optimal designs for binary longitudinal responses  

Science Conference Proceedings (OSTI)

Optimal design problems for logistic mixed effects models for binary longitudinal responses are considered. A function of the approximate information matrix under the framework of the Penalized Quasi Likelihood (PQL) and a generalized linear mixed model ...

Fetene B. Tekle; Frans E. S. Tan; Martijn P. F. Berger

2008-08-01T23:59:59.000Z

70

Program Strategies and Results for California’s Energy Efficiency and Demand Response Markets  

E-Print Network (OSTI)

Global Energy Partners provides a review of California’s strategic approach to energy efficiency and demand response implementation, with a focus on the industrial sector. The official role of the state, through the California Energy Commission (CEC), is presented along with special efforts being made in support of industrial end users. The interrelationship between the CEC and the California Public Utility Commission (CPUC) with regard to advancing demand side programs is highlighted. The specific cost recovery mechanisms put in place by the CPUC is discussed, including California’s experience with revenue decoupling, public purpose funds, and avoided cost calculations. Next, the role as energy efficiency (EE) and demand response (DR) program implementer played by each of the state Investor Owned Utilities (IOUs) is outlined. Each utility is responsible for serving major end use market segments with target programs designed to provide unique value. Within the industrial sector, there is special attention paid to the needs of the various sub-markets such as oil refining, agriculture, food processing, water and wastewater, manufacturing, and others. A review is presented of how EE and DR measures are selected, how incentive values are determined, which customers are eligible for programs, and how programs are evaluated to gage effectiveness. Lastly, mechanisms used by the IOU’s to deliver industrial EE and DR incentive programs are discussed. This includes a review of “core” programs administered by the utilities as well as subcontracted programs administered by “third party” implementers and “local government partners”. Global Energy Partners will offer specific examples of program experience in the oil & gas, agriculture, and food processing sectors, and will also highlight program success within the emerging “automated” demand response market.

Ehrhard, R.; Hamilton, G.

2008-01-01T23:59:59.000Z

71

Demand responsive programs - an emerging resource for competitive electricity markets?  

SciTech Connect

The restructuring of regional electricity markets in the U.S. has been accompanied by numerous problems, including generation capacity shortages, transmission congestion, wholesale price volatility, and reduced system reliability. These problems have created significant new opportunities for technologies and business approaches that allow load serving entities and other aggregators, to control and manage the load patterns of their wholesale or retail end-users. These technologies and business approaches for manipulating end-user load shapes are known as Load Management or, more recently, Demand Responsive programs. Lawrence Berkeley National Laboratory (LBNL) is conducting case studies on innovative demand responsive programs and presents preliminary results for five case studies in this paper. These case studies illustrate the diversity of market participants and range of technologies and business approaches and focus on key program elements such as target markets, market segmentation and participation results; pricing scheme; dispatch and coordination; measurement, verification, and settlement; and operational results where available.

Heffner, Grayson C. Dr.; Goldman, Charles A.

2001-06-25T23:59:59.000Z

72

Model Design for Transmission Congestion Management Based on Fuzzy Programming  

Science Conference Proceedings (OSTI)

Based on data collected previously on the electricity market of the East China, we use stepwise regression method to find the approximate expression of the active power flow of each power sets on East China’s certain electrical network. Then classified ... Keywords: electrical network, transmission congestion management, fuzzy programming, multiobjective optimization, model design

Yu Zhao; Bo Zhao; Chunjie Qi

2009-01-01T23:59:59.000Z

73

Energy Analysis Department Designing PV Incentive Programs to  

E-Print Network (OSTI)

Energy Analysis Department Designing PV Incentive Programs to Promote Performance: A Review to undersized wiring) Maintenance Cleaning, tree-trimming Repair/replacement of failed components #12;Energy of Current Practice Galen Barbose, Ryan Wiser, Mark Bolinger Lawrence Berkeley National Laboratory #12;Energy

74

Perspective on Beyond Design Basis Event Analysis and Response | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Perspective on Beyond Design Basis Event Analysis and Response Perspective on Beyond Design Basis Event Analysis and Response Perspective on Beyond Design Basis Event Analysis and Response September 20, 2012 Presenter: John Schwenker, Nuclear Safety Manager for Liquid Operations, Savannah River Remediation, LLC, Savannah River Site Topics Covered: Waste Tanks can contain up to 1.3 Millions Gallons of highly radioactive waste (sludge, salt, supernate). Type III/IIIA Waste Tank Structures and berms are PC-3 Qualified. Tanks may fail in a Beyond Design Basis Seismic Event. Waste could flow above ground to streams and rivers. Unmitigated Tank Explosion exceeds offsite Evaluation Guidelines Hydrogen gas can be trapped in the sludge and saltcake structure. Seismic Event can cause a prompt release of trapped hydrogen. It is not physically practical to install a ventilation system that

75

California DREAMing: the design of residential demand responsive technology with people in mind  

E-Print Network (OSTI)

Efficiency and Demand Response Programs for 2005/2006. fromEngaging our Customers in Demand Response. Retrieved OctoberAdvanced Metering and Demand Response in Electricity

Peffer, Therese E.

2009-01-01T23:59:59.000Z

76

Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings  

E-Print Network (OSTI)

below. Fig. 4 Automated demand response general features Thearchitecture Automated Demand Response System ArchitectureCould Bene?t for Demand Response Programs, But Challenges

Piette, Mary Ann

2010-01-01T23:59:59.000Z

77

Containment atmosphere response (CAR) program. Second status report. [HTGR  

Science Conference Proceedings (OSTI)

This report contains a summary of the work performed under the Containment Atmosphere Response (CAR) Program of the High-Temperature Gas-Cooled Reactor (HTGR) Safety Research Task since the publication of the previous status report (February 1978). The work concentrated on development of models describing containment phenomena during core heatup in support of probabilistic risk assessment studies. Models were completed for fission product iodine sorption on coated surfaces, diffusivity and retentivity of untreated concrete, iodine interaction with condensing steam on the containment atmosphere boundaries, and the cleanup filter system. These models were incorporated into a new computer program called CARCAS, a substantial extension of the CNTB computer program, and applied to Accident Initiation and Progression Analysis for Phase II core heatup sequences. Development was begun on models describing the postulated behavior of particulate fission products or aerosols within and leaking out of the containment.

Landoni, J.A.

1980-03-01T23:59:59.000Z

78

DOE enforcement program roles and responsibilities: DOE handbook  

Science Conference Proceedings (OSTI)

The Price-Anderson Act provides indemnification to DOE contractors who manage and conduct nuclear activities in the DOE complex. The government acts as an insurer for these contractors against any findings of liability from the nuclear activities of the contractor within the scope of its contract. 10 CFR Part 820 establishes the legal framework for implementing DOE`s Nuclear Safety Enforcement Program. Integration with other DOE organizations and programs would assure that the enforcement process properly considers the actual or potential safety significance of a violation when determining an appropriate enforcement sanction. Achieving a proactive contractor compliance assurance rather than a heavy enforcement hand, will require a foundation of cooperation and teamwork across DOE organizations. This handbook identifies the areas of interface for the DOE Enforcement Program and provides guidance on roles and responsibilities for the key DOE organizational areas. It complements DOE-HDBK-1087-95 and 1089-95.

NONE

1995-08-01T23:59:59.000Z

79

Do 'enabling technologies' affect customer performance in price-responsive load programs?  

SciTech Connect

Price-responsive load (PRL) programs vary significantly in overall design, the complexity of relationships between program administrators, load aggregators, and customers, and the availability of ''enabling technologies''. Enabling technologies include such features as web-based power system and price monitoring, control and dispatch of curtailable loads, communications and information systems links to program participants, availability of interval metering data to customers in near real time, and building/facility/end-use automation and management capabilities. Two state agencies - NYSERDA in New York and the CEC in California - have been conspicuous leaders in the demonstration of demand response (DR) programs utilizing enabling technologies. In partnership with key stakeholders in these two states (e.g., grid operator, state energy agencies, and program administrators), Lawrence Berkeley National Laboratory (LBNL) and Pacific Northwest National Laboratory (PNNL) surveyed 56 customers who worked with five contractors participating in CEC or NYSERDA-sponsored DR programs. We combined market research and actual load curtailment data when available (i.e., New York) or customer load reduction targets in order to explore the relative importance of contractor's program design features, sophistication of control strategies, and reliance on enabling technologies in predicting customer's ability to deliver load reductions in DR programs targeted to large commercial/industrial customers. We found preliminary evidence that DR enabling technology has a positive effect on load curtailment potential. Many customers indicated that web-based energy information tools were useful for facilitating demand response (e.g., assessing actual performance compared to load reduction contract commitments), that multiple notification channels facilitated timely response, and that support for and use of backup generation allowed customers to achieve significant and ! predictable load curtailment s. We also found that 60-70 percent of the customers relied on manual approaches to implementing load reductions/curtailments, rather than automated load control response. The long-term sustainability of customer load curtailments would be significantly enhanced by automated load response capabilities, such as optimizing EMCS systems to respond to day-ahead energy market prices or load curtailments in response to system emergencies.

Goldman, Charles A.; Kintner-Meyer, Michael; Heffner, Grayson

2002-05-15T23:59:59.000Z

80

Do 'enabling technologies' affect customer performance in price-responsive load programs?  

SciTech Connect

Price-responsive load (PRL) programs vary significantly in overall design, the complexity of relationships between program administrators, load aggregators, and customers, and the availability of ''enabling technologies''. Enabling technologies include such features as web-based power system and price monitoring, control and dispatch of curtailable loads, communications and information systems links to program participants, availability of interval metering data to customers in near real time, and building/facility/end-use automation and management capabilities. Two state agencies - NYSERDA in New York and the CEC in California - have been conspicuous leaders in the demonstration of demand response (DR) programs utilizing enabling technologies. In partnership with key stakeholders in these two states (e.g., grid operator, state energy agencies, and program administrators), Lawrence Berkeley National Laboratory (LBNL) and Pacific Northwest National Laboratory (PNNL) surveyed 56 customers who worked with five contractors participating in CEC or NYSERDA-sponsored DR programs. We combined market research and actual load curtailment data when available (i.e., New York) or customer load reduction targets in order to explore the relative importance of contractor's program design features, sophistication of control strategies, and reliance on enabling technologies in predicting customer's ability to deliver load reductions in DR programs targeted to large commercial/industrial customers. We found preliminary evidence that DR enabling technology has a positive effect on load curtailment potential. Many customers indicated that web-based energy information tools were useful for facilitating demand response (e.g., assessing actual performance compared to load reduction contract commitments), that multiple notification channels facilitated timely response, and that support for and use of backup generation allowed customers to achieve significant and ! predictable load curtailment s. We also found that 60-70 percent of the customers relied on manual approaches to implementing load reductions/curtailments, rather than automated load control response. The long-term sustainability of customer load curtailments would be significantly enhanced by automated load response capabilities, such as optimizing EMCS systems to respond to day-ahead energy market prices or load curtailments in response to system emergencies.

Goldman, Charles A.; Kintner-Meyer, Michael; Heffner, Grayson

2002-05-15T23:59:59.000Z

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Program on Technology Innovation: Effect of Seismic Wave Incoherence on Foundation and Building Response  

Science Conference Proceedings (OSTI)

Task S2.1 of the New Plant Seismic Issues Resolution Programa joint effort of EPRI and the Department of Energy (DOE)entails a research program into the effect of seismic wave incoherence on foundation and building response. The tasks objective is to systematically study seismic wave incoherence effects on structures/foundations similar to those being considered for advanced reactor designs. Seismic wave incoherence occurs because of horizontal spatial variation of both horizontal and vertical ground mot...

2006-11-15T23:59:59.000Z

82

Designing PV Incentive Programs to Promote Performance: A Reviewof Current Practice in the U.S.  

Science Conference Proceedings (OSTI)

In the U.S., the increasing financial support for customer-sited photovoltaic (PV) systems provided through publicly-funded incentive programs has heightened concerns about the long-term performance of these systems. Given the barriers that customers face to ensuring that their PV systems perform well, and the responsibility that PV incentive programs bear to ensure that public funds are prudently spent, these programs should, and often do, play a critical role in addressing PV system performance. To provide a point of reference for assessing the current state of the art, and to inform program design efforts going forward, we examine the approaches to encouraging PV system performance used by 32 prominent PV incentive programs in the U.S. We identify eight general strategies or groups of related strategies that these programs have used to address factors that affect performance, and describe key implementation details. Based on this review, we then offer recommendations for how PV incentive programs can be effectively designed to mitigate potential performance issues.

Barbose, Galen; Wiser, Ryan; Bolinger, Mark

2006-10-06T23:59:59.000Z

83

CR mammography: Design and implementation of a quality control program  

SciTech Connect

Despite the recent acquisition of significant quantities of computed radiography CR equipment for mammography, Mexican regulations do not specify the performance requirements for digital systems such as those of CR type. The design of a quality control program QCP specific for CR mammography systems was thus considered relevant. International protocols were taken as reference to define tests, procedures and acceptance criteria. The designed QCP was applied in three CR mammography facilities. Important deficiencies in spatial resolution, noise, image receptor homogeneity, artifacts and breast thickness compensation were detected.

Moreno-Ramirez, A.; Brandan, M. E.; Villasenor-Navarro, Y.; Galvan, H. A.; Ruiz-Trejo, C. [Instituto de Fisica, Universidad Nacional Autonoma de Mexico, DF 04510 (Mexico); Departamento de Radiodiagnostico, Instituto Nacional de Cancerologia, DF 14080 (Mexico); Instituto de Fisica, Universidad Nacional Autonoma de Mexico, DF 04510 (Mexico)

2012-10-23T23:59:59.000Z

84

Final Report: Planetary Instrument Definition and Design Program (PIDDP) Support Project  

SciTech Connect

The results of Sandia National Laboratories' participation in the NASA Planetary Definition and Design Program are summarized. Areas reported include the characterization of large area cadmium zinc telluride spectrometers and the application of simulation techniques to the prediction of device performance. Also investigated was the response of mercuric iodide devices in the region from 1 to 100 KeV. A literature study to determine the status or radiation damage measurements in room temperature semiconductor devices is also reported.

L. A. Franks; R. B. James

1999-03-01T23:59:59.000Z

85

Commonwealth Edison Company Customer Applications Program - Objectives, Research Design, and Implementation Details  

Science Conference Proceedings (OSTI)

Commonwealth Edison Company (ComEd) launched an ambitious and comprehensive pilot program designed to resolve uncertainties about how advanced metering infrastructure (AMI) technology can be used to stimulate changes in residential electricity consumption. The study was launched in response to the Illinois Commerce Commission order in Docket 07-0566. Industry determination of the value of AMI technology is incomplete because customer impacts have been determined from pilots and experiments that involved ...

2011-01-27T23:59:59.000Z

86

SOLCOST-PASSIVE solar energy design program: User's Guide  

DOE Green Energy (OSTI)

The SOLCOST-PASSIVE solar energy design program is a public domain interactive computer design tool intended for use by non-thermal specialists to size passive solar systems with a methodology based on the Los Alamos Solar Load Ratio method. A life cycle savings analysis is included in the program. An overview of SOLCOST-PASSIVE capabilities and the Solar Load Ratio method which it is based on is presented. A detailed guide to the SOLCOST-PASSIVE input parameters is given. Sample problems showing typical execution sessions and the resulting SOLCOST-PASSIVE output are included. Appendices A thru D provide details on the SLR method and the life cycle savings methodology of SOLCOST-PASSIVE. (MHR)

Not Available

1980-09-01T23:59:59.000Z

87

Low Dose Radiation Research Program: Adaptive Response of Mouse Skin  

NLE Websites -- All DOE Office Websites (Extended Search)

Adaptive Response of Mouse Skin Epithelial Cells to Low Dose Adaptive Response of Mouse Skin Epithelial Cells to Low Dose Ionizing Radiation: Induction of NF-κB, MnSOD, 14-3-3ζ and Cyclin B1 Authors: Jian Jian Li, Kazi M. Ahmed, Ming Fan, Shaozhong Dong, Douglas R. Spitz, and Cheng-Rong Yu Institutions: Division of Molecular Radiobiology, Purdue University School of Health Sciences, West Lafayette, Indiana; Free Radical and Radiation Biology Program, Department of Radiation Oncology, Holden Comprehensive Cancer Center, The University of Iowa, Iowa City, Iowa; Molecular Immunology Section, Laboratory of Immunology, National Eye Institute, National Institutes of Health, Bethesda, Maryland Gene expression profiles demonstrate that a group of key stress-responsive genes are associated with radiation exposure and may contribute to cellular

88

Feed-pump hydraulic performance and design improvement, Phase I: research program design. Final report  

Science Conference Proceedings (OSTI)

As a result of prior EPRI-sponsored studies, it was concluded that a research program should be designed and implemented to provide an improved basis for the design, procurement, testing, and operation of large feed pumps with increased reliability and stability over the full range of operating conditions. This two-volume report contains a research plan which is based on a review of the present state of the art and which defines the necessary R and D program and estimates the benefits and costs of the program. The recommended research program consists of 30 interrelated tasks. It is designed to perform the needed research; to verify the results; to develop improved components; and to publish computer-aided design methods, pump specification guidelines, and a troubleshooting manual. Most of the technology proposed in the research plan is applicable to nuclear power plants as well as to fossil-fired plants. This volume contains appendixes on pump design, cavitation damage, performance testing, hydraulics, two-phase flow in pumps, flow stability, and rotor dynamics.

Brown, W.H.; Gopalakrishnan, S.; Fehlau, R.; Thompson, W.E.; Wilson, D.G.

1982-03-01T23:59:59.000Z

89

Modular Communication Interface Mapping to Demand Response Programs: Mapping CEA-2045 Messages to Existing Demand Response Programs  

Science Conference Proceedings (OSTI)

This report presents the technical results of an evaluation of the Consumer Electronics Association’s ANSI/ CEA-2045 in terms of its ability to support the data requirements of utility demand response programs. This evaluation was performed as part of a collaborative project in which utilities engaged end-device makers and communication technology providers to build protoypes and test for interoperability in a laboratory environment.The specific objective of the evaluation detailed ...

2013-11-14T23:59:59.000Z

90

Utility Conservation Programs: A Regulatory and Design Framework  

E-Print Network (OSTI)

Investing in opportunities to conserve electricity is frequently very economic to the energy user. Often, it also is in society's, ratepayers', or a utility's economic interest to promote this conservation by the utility providing a financial incentive to the customer for the investment. Such a conservation program, whether undertaken by a utility on its own initiative or required by a public service commission, raises several issues of public policy that must be carefully examined. First, a regulatory framework is necessary to ensure compatibility between the design of a conservation program and its stated goals. At times, regulatory policies inconsistent with the stated goal of a conservation program have been applied. Second, constraints that necessitate the utility offering less than the theoretical maximum amount of a financial incentive under the applicable regulatory policy need to be recognized. Finally, a methodology to assess the induced impacts of the conservation program is necessary to evaluate the program's cost-effectiveness under any of the chosen regulatory policies.

Norland, D. L.; Wolf, J. L.

1986-06-01T23:59:59.000Z

91

Global Facility Network Design with Transshipment and Responsive Pricing  

Science Conference Proceedings (OSTI)

This paper considers the facility network design problem for a global firm that sells to two markets: the domestic market and a foreign market. Although the firm has to invest in capital-intensive production facilities and produce outputs in the face ... Keywords: global facility network, global operations management, newsvendor network, operations strategy, responsive pricing, supply chain management, transshipment

Lingxiu Dong; Panos Kouvelis; Ping Su

2010-04-01T23:59:59.000Z

92

Deferring design pattern decisions and automating structural pattern changes using a design-pattern-based programming system  

Science Conference Proceedings (OSTI)

In the design phase of software development, the designer must make many fundamental design decisions concerning the architecture of the system. Incorrect decisions are relatively easy and inexpensive to fix if caught during the design process, but the ... Keywords: Design patterns, design decisions, object-oriented frameworks, parallel programming, software maintenance

Steve MacDonald; Kai Tan; Jonathan Schaeffer; Duane Szafron

2009-04-01T23:59:59.000Z

93

Response to the NIST RFI for M-TAC PROGRAM University of ...  

Science Conference Proceedings (OSTI)

Page 1. Response to the NIST RFI for M-TAC PROGRAM University of Michigan ... University of Michigan Principal Contact: ...

2013-08-06T23:59:59.000Z

94

Guidebook for Farmstead Demand-Side Management (DSM) program design  

SciTech Connect

The acceptance and growth of Demand-Side Management (DSM) continues to increase in the US. According to latest estimates, total expenditures on electric utility DSM programs now exceed $1.2 billion annually, with these investments ranging from 1 to 5 percent of a utility's gross revenues. In addition, due to increasing environmental concerns and the high cost of new capacity, these expenditure levels are expected to increase. While the vast majority of these DSM programs are directed at the more traditional residential, commercial and industrial market sectors, significant opportunities still exist. One market segment that has not been the focus of attention but a critical sector from an economic development perspective for marry utilities -- is the agricultural and farmstead market. Although the total number of farms in the United States decreased by approximately 5 percent between 1985 and 1989, the land dedicated to farming still accounts for over 995 million acres. Furthermore, the total value of farm output in the United States has been steadily increasing since 1986. The limited penetration of energy efficiency measures in farmsteads provides an excellent opportunity for utilities to expand their DSM programming efforts to capture this non-traditional'' market segment, and at the same time assist farms in increasing their efficiency and competitiveness. In marry states, and, in particular New York State, agriculture plays a major economic role. The importance of farms not only from a utility perspective but also from a state and federal perspective cannot be overstated. As such, utilities are in a unique position to facilitate farmstead DSM technology investments in an effort to benefit the farmer (and his profitability), the utility, the state and the country. This guidebook is designed to provide the framework for agricultural demand planning, including market assessment, technology assessment, market penetration analysis and program design.

Rose, M.; Camera, R.K.

1992-02-21T23:59:59.000Z

95

Low Dose Radiation Research Program: Low Dose Response of Respiratory Cells  

NLE Websites -- All DOE Office Websites (Extended Search)

Low Dose Radiation Research Program: Low Dose Response of Respiratory Low Dose Radiation Research Program: Low Dose Response of Respiratory Cells in Intact Tissues and Reconstituted Tissue Constructs Authors: John Ford, Amy Maslowski, Alex Redd and Les Braby Institutions: Texas A&M University, College Station, TX We are developing a model of respiratory tissue using a perfusion culture system. We are using this system to quantify the effects of normal tissue architecture, and the interaction of epithelial cells with other cell types, on radiation-induced bystander effects. Tracheal tissue taken from young adult Fischer 344 rats is imbedded in a growth factor enriched agarose matrix. The chamber is designed to allow growth medium to periodically wash the epithelial surface of the tracheal lumen while maintaining the air-interface that is necessary for the normal

96

Seismic Safety Margins Research Program (Phase I). Project IV. Structural building response; Structural Building Response Review  

Science Conference Proceedings (OSTI)

As part of the Phase I effort of the Seismic Safety Margins Research Program (SSMRP) being performed by the University of California Lawrence Livermore Laboratory for the US Nuclear Regulatory Commission, the basic objective of Subtask IV.1 (Structural Building Response Review) is to review and summarize current methods and data pertaining to seismic response calculations particularly as they relate to the objectives of the SSMRP. This material forms one component in the development of the overall computational methodology involving state of the art computations including explicit consideration of uncertainty and aimed at ultimately deriving estimates of the probability of radioactive releases due to seismic effects on nuclear power plant facilities.

Healey, J.J.; Wu, S.T.; Murga, M.

1980-02-01T23:59:59.000Z

97

Land-use Policy and Program Design Toolkit | Open Energy Information  

Open Energy Info (EERE)

Land-use Policy and Program Design Toolkit Land-use Policy and Program Design Toolkit Jump to: navigation, search Stage 4 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities Develop_BAU Stage 4: Prioritizing and Planning for Actions Begin execution of implementation plans 1.0. Organizing the LEDS Process 1.1. Institutional Structure for LEDS 1.2. Workplan to Develop the LEDS 1.3. Roles and responsibilities to develop LEDS 2.1. Assess current country plans, policies, practices, and capacities 2.2. Compile lessons learned and good practices from ongoing and previous sustainable development efforts in the country 2.3. Assess public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development

98

Strategy for Designing DSM Program after the Restructuring in Korea  

E-Print Network (OSTI)

To maintain supply adequacy and mitigate price volatility in electricity market, the necessity for obtaining demandside resource is increasing and obtaining demand-side resource is set as a priority of electricity policy. For this purpose, we introduce a new DSM mechanism and program development strategies based on customer response and electricity industry efficiency. Especially we introduced DLC(Direct Load Control) technology via two-way communication scheme for large customer. This DLC program targets interruptible load that covers large customer in commercial and industrial sector. This program can retain demand reserve that does not interrupt process in plant or business along with real-time monitoring load condition of end-use and interrupt load by pre-determined procedures, if necessary. This analysis shows that electricity boiler, pump, blower, HVAC can save energy during some time. In addition, developing system to monitor end-use load and interconnecting it with MOS(Market Operation System) should be established as infrastructure in DSM.

Rhee, C.; Lee, K.; Jo, I.

2002-01-01T23:59:59.000Z

99

SOLCOST-PHOTOVOLTAIC solar energy design program: User's Guide  

DOE Green Energy (OSTI)

The SOLCOST-PHOTOVOLTAIC solar energy design program is a public domain interactive computer design tool intended for use by non-solar specialists to predict the long term performance for photovoltaic systems. A life cycle cost analysis is included in the program along with the ERDA-EPRI standard economic analysis which predicts levelized busbar energy costs for the photovoltaic system assuming ownership by an electric utility. SOLCOST-PV currently can evaluate flat plate arrays and concentrating arrays which use Fresnel lenses and passive cooling. The methodology could easily be extended to include all the known types of concentrators, however the scope of the version 1.0 activity was limited to only the flat plate and the passive Fresnel concentrators. An overview of the SOLCOST-PV capabilities and methodology is given. A detailed guide to the SOLCOST-PV input parameters is included, and examples showing typical interactive execution sessions and the resulting SOLCOST-PV output are presented. Appendices A and B provide additional information on the SOLCOST-PV analysis.

Not Available

1980-10-01T23:59:59.000Z

100

Designing PV Incentive Programs to Promote System Performance: AReview of Current Practice  

SciTech Connect

Some stakeholders continue to voice concerns about the performance of customer-sited photovoltaic (PV) systems, particularly because these systems typically receive financial support through ratepayer- or publicly-funded programs. Although much remains to be understood about the extent and specific causes of poor PV system performance, several studies of the larger programs and markets have shed some light on the issue. An evaluation of the California Energy Commission (CEC)'s Emerging Renewables Program, for example, found that 7% of systems, in a sample of 95, had lower-than-expected power output due to shading or soiling (KEMA 2005). About 3% of a larger sample of 140 systems were not operating at all or were operating well below expected output, due to failed equipment, faulty installation workmanship, and/or a lack of basic maintenance. In a recent evaluation of the other statewide PV incentive program in California, the Self-Generation Incentive Program, 9 of 52 projects sampled were found to have annual capacity factors less than 14.5%, although reasons for these low capacity factors generally were not identified (Itron 2005). Studies of PV systems in Germany and Japan, the two largest PV markets worldwide, have also revealed some performance problems associated with issues such as shading, equipment and installation defects, inverter failure, and deviations from module manufacturers' specifications (Otani et al. 2004, Jahn & Nasse 2004). Although owners of PV systems have an inherent incentive to ensure that their systems perform well, many homeowners and building operators may lack the necessary information and expertise to carry out this task effectively. Given this barrier, and the responsibility of PV incentive programs to ensure that public funds are prudently spent, these programs should (and often do) play a critical role in promoting PV system performance. Performance-based incentives (PBIs), which are based on actual energy production rather than the rated capacity of the modules or system, are often suggested as one possible strategy. Somewhat less recognized are the many other program design options also available, each with its particular advantages and disadvantages. To provide a point of reference for assessing the current state of the art, and to inform program design efforts going forward, we examine the approaches to encouraging PV system performance - including, but not limited to, PBIs - used by 32 prominent PV incentive programs in the U.S. (see Table 1).1 We focus specifically on programs that offer an explicit subsidy payment for customer-sited PV installations. PV support programs that offer other forms of financial support or that function primarily as a mechanism for purchasing renewable energy credits (RECs) through energy production-based payments are outside the scope of our review.2 The information presented herein is derived primarily from publicly available sources, including program websites and guidebooks, programs evaluations, and conference papers, as well as from a limited number of personal communications with program staff. The remainder of this report is organized as follows. The next section presents a simple conceptual framework for understanding the issues that affect PV system performance and provides an overview of the eight general strategies to encourage performance used among the programs reviewed in this report. The subsequent eight sections discuss in greater detail each of these program design strategies and describe how they have been implemented among the programs surveyed. Based on this review, we then offer a series of recommendations for how PV incentive programs can effectively promote PV system performance.

Barbose, Galen; Wiser, Ryan; Bolinger, Mark

2006-11-12T23:59:59.000Z

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

DOE-TSPP-1, Technical Standards Program Responsibilities - July 1, 2009 |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, Technical Standards Program Responsibilities - July 1, , Technical Standards Program Responsibilities - July 1, 2009 DOE-TSPP-1, Technical Standards Program Responsibilities - July 1, 2009 Technical Standards Program Procedures (TSPP) - August 26, 2009 This procedure describes the responsibilities of persons who are charged with implementing the DOE Technical Standards Program. This procedure applies to all DOE Headquarters and field organizations, management and operating contractors, and laboratories (hereafter referred to collectively as "DOE Components") working to the requirements of the latest revision of DOE Order 252.1, "Technical Standards Program." DOE-TSPP-1, Technical Standards Program Responsibilities - July 1, 2009 More Documents & Publications DOE-TSPP-1, Technical Standards Program Responsibilities - August 1, 2000

102

DOE-TSPP-1, Technical Standards Program Responsibilities - August 1, 2000 |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-TSPP-1, Technical Standards Program Responsibilities - August DOE-TSPP-1, Technical Standards Program Responsibilities - August 1, 2000 DOE-TSPP-1, Technical Standards Program Responsibilities - August 1, 2000 Technical Standards Program Procedures (TSPP) This procedure describes the responsibilities of persons who are charged with implementing the DOE Technical Standards Program. This procedure applies to all DOE Headquarters and field organizations, management and operating contractors, and laboratories (hereafter referred to collectively as "DOE Components") working to the requirements of the latest revision of DOE Order 252.1, "Technical Standards Program." DOE-TSPP-1, Technical Standards Program Responsibilities - August 1, 2000 More Documents & Publications DOE-TSPP-1, Technical Standards Program Responsibilities - July 1, 2009

103

DOE-TSPP-1-2013, Program Overview and Responsibilities | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

-2013, Program Overview and Responsibilities -2013, Program Overview and Responsibilities DOE-TSPP-1-2013, Program Overview and Responsibilities Technical Standards Program Procedures (TSPP) - September 16, 2013 This procedure describes the responsibilities of persons who are charged with implementing the Department of Energy (DOE) Technical Standards Program (TSP). This procedure applies to all DOE Headquarters and field organizations, management and operating contractors, and laboratories (hereafter referred to collectively as Technical Standards Program (TSP) participants) working to the requirements of DOE Order (O) 252.1A, Technical Standards Program. DOE-TSPP-1-2013, Program Overview and Responsibilities More Documents & Publications DOE-TSPP-0, Technical Standards Program Procedures - August 1, 2000

104

Design for energy efficiency: Energy efficient industrialized housing research program. Progress report  

Science Conference Proceedings (OSTI)

Since 1989, the U.S. Department of Energy has sponsored the Energy Efficient Industrialized Housing research program (EEIH) to improve the energy efficiency of industrialized housing. Two research centers share responsibility for this program: The Center for Housing Innovation at the University of Oregon and the Florida Solar Energy Center, a research institute of the University of Central Florida. Additional funding is provided through the participation of private industry, state governments and utilities. The program is guided by a steering committee comprised of industry and government representatives. This report summarizes Fiscal Year (FY) 1990 activities and progress, and proposed activities for FY 1991 in Task 2.1 Design for Energy Efficiency. This task establishes a vision of energy conservation opportunities in critical regions, market segments, climate zones and manufacturing strategies significant to industrialized housing in the 21st Century. In early FY 1990, four problem statements were developed to define future housing demand scenarios inclusive of issues of energy efficiency, housing design and manufacturing. Literature surveys were completed to assess seven areas of influence for industrialized housing and energy conservation in the future. Fifty-five future trends were identified in computing and design process; manufacturing process; construction materials, components and systems; energy and environment; demographic context; economic context; and planning policy and regulatory context.

Kellett, R.; Berg, R.; Paz, A.; Brown, G.Z.

1991-03-01T23:59:59.000Z

105

Design Considerations for Frequency Responsive Grid Friendly Appliances  

SciTech Connect

The paper addresses design considerations for frequency responsive Grid FriendlyTM appliances (FR-GFAs). Case studies have been done based on the frequency data collected in 2003 in Western Electricity Coordinating Council (WECC) systems. An FR-GFA can turn on/off based on frequency signals and make selective low-frequency load shedding possible at appliance level. FR-GFAs can also be treated as an spinning reserve to maintain a load-to-generation balance under power system normal operation states. The triggering frequency and duration of the FR-GFA device with different frequency setting schemes are simulated. Design considerations of the FR-GFA are then discussed based on simulation results.

Lu, Ning; Hammerstrom, Donald J.

2006-05-24T23:59:59.000Z

106

Advanced Energy Design Guides | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Compliance Regulations Resource Center Advanced Energy Design Guides The Advanced Energy Design Guides (AEDGs) are a series of publications designed to provide recommendations for...

107

NEW HAMPSHIRE 4-H HORSE PROGRAM Cover Design Contest 2013  

E-Print Network (OSTI)

promotion. State 4-H Office Address: Rhiannon Beauregard, Program Coordinator UNH Cooperative Extension

New Hampshire, University of

108

A hybrid evolutionary programming approach for optimal worst case tolerance design of magnetic devices  

Science Conference Proceedings (OSTI)

This paper presents a hybrid evolutionary programming approach to solve the worst case tolerance design problem (WCTDP) in magnetic devices. The hybrid algorithm is formed by a basic evolutionary programming approach, mixed with a gradient-guided local ... Keywords: Evolutionary programming, Hybrid algorithms, Tolerance analysis, Tolerance design

Sancho Salcedo-Sanz; Angel M. PéRez-Bellido; Emilio G. Ortiz-GarcíA; Jose A. Portilla-Figueras; Silvia JiméNez-FernáNdez

2012-08-01T23:59:59.000Z

109

Magnet cold mass high load supports thermal response and performance design correlation  

SciTech Connect

Through General Dynamics Convair Division's experience in the design, detail analysis, and manufacturing of structural supports for superconducting magnet cryostats suspended in a vacuum enclosure, a data base, well suited for the development of correlations of pertinent thermal performance criteria for stainless steel supports, has been created. The thermal requirements of these supports in fusion applications are well defined for the Mirror Fusion Test Facility (MFTF) and have been analyzed in detail for cool-down response and steady-state performance, using Convair's THERMAL ANALYZER computer program. From the output of these thermal conditioning simulations, correlations were developed for magnet LHe heating from supports in terms of strut geometric parameters.

Jones, G.R.; Christensen, E.H.

1984-09-01T23:59:59.000Z

110

U.S. Department of Energy Region 6 Radiological Assistance Program response plan. Revision 2  

Science Conference Proceedings (OSTI)

Upon request, the DOE, through the Radiological Assistance Program (RAP), makes available and will provide radiological advice, monitoring, and assessment activities during radiological incidents where the release of radioactive materials is suspected or has occurred. Assistance will end when the need for such assistance is over, or if there are other resources available to adequately address the incident. The implementation of the RAP is usually accomplished through the recommendation of the DOE Regional Coordinating Office`s (RCO) on duty Regional Response Coordinator (RRC) with the approval of the Regional Coordinating Office Director (RCOD). The DOE Idaho Operations Office (DOE-ID) is the designated RCO for DOE Region 6 RAP. The purpose of this document is: to describe the mechanism for responding to any organization or private citizen requesting assistance to radiological incidents; to coordinate radiological assistance among participating federal agencies, states, and tribes in DOE Region 6; and to describe the RAP Scaled Response concept of operations.

Jakubowski, F.M.

1998-02-01T23:59:59.000Z

111

DOE-TSPP-7, Technical Standards Program Responsibilities - August 1, 2000 |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Responsibilities - August Program Responsibilities - August 1, 2000 DOE-TSPP-7, Technical Standards Program Responsibilities - August 1, 2000 Technical Standards Program Procedures (TSPP) This procedure provides guidance for resolving comments on DOE Technical Standards that are received during the coordination process. NOTE: Resolution of comments from Review Activities on draft or revised non-Government standards should be handled by the DOE representative to the standards-writing activity in accordance with this procedure. This procedure applies to all DOE Headquarters and field organizations, management and operating contractors, and laboratories (hereafter referred to collectively as DOEComponents") working to the latest revision of DOE Order 252.1, "Technical Standards Program."

112

ILC Polarized Electron Source Design and R&D Program  

Science Conference Proceedings (OSTI)

The R and D program for the ILC electron focuses on three areas. These are the source drive laser system, the electron gun and photo cathodes necessary to produce a highly polarized electron beam. Currently, the laser system and photo cathode development take place at SLAC's 'ILC Injector Test facility', which is an integrated lab (laser and gun) that allows the production of the electron beam and is equipped with a set of diagnostics, necessary to characterize the source performance. Development of the ILC electron gun takes place at Jefferson Lab, where advanced concepts and technologies for HV DC electron guns for polarized beams are being developed. The goal is to combine both efforts at one facility to demonstrate an electron beam with ILC specifications, which are electron beam charge and polarization as well as the cathode's lifetime. The source parameters are summarized in Table 1. The current schematic design of the ILC central complex is depicted in Figure 1. The electron and positron sources are located and laid out approximately symmetric on either side of the damping rings.

Brachmann, A.; Sheppard, J.; Zhou, F.; Poelker, M.; /SLAC

2012-04-06T23:59:59.000Z

113

Radwaste assessment program for nuclear station modifications by design engineering  

SciTech Connect

Radwaste burial for Duke Power Company's (DPC's) seven nuclear units has become a complicated and costly process. Burial costs are based on overall volume, surcharges for radioactivity content and weight of containers, truck and cask rental, driver fees, and state fees and taxes. Frequently, radwaste costs can be as high as $500 per drum. Additionally, DPC is limited on the total burial space allocated for each plant each year. The thrust of this program is to reduce radwaste volumes needing burial at either Barnwell, South Carolina, or Richland, Washington. A limited number of options are available at our sites: (a) minimization of radwaste volume production, (b) segregation of contamination and noncontaminated trash, (c) decontamination of small hardware, (d) volume reduction of compatible trash, (e) incineration of combustible trash (available at Oconee in near future), and (f) burial of below-regulatory-concern very low level waste on site. Frequently, costs can be reduced by contracting services outside the company, i.e., supercompaction, decontamination, etc. Information about radwaste volumes, activities, and weight, however, must be provided to the nuclear production department (NPD) radwaste group early in the nuclear station modification (NSM) process to determine the most cost-effective method of processing radwaste. In addition, NSM radwaste costs are needed for the NPD NSM project budget. Due to the advanced planning scope of this budget, NSM construction costs must be estimated during the design-phase proposal.

Eble, R.G.

1988-01-01T23:59:59.000Z

114

Labs21 sustainable design programming checklist version 1.0  

E-Print Network (OSTI)

for all ventilation fans at design conditions divided byof fan and pump energy required to achieve the design towerdivided by the total design flow of all the fans. Objective:

Mathew, Paul; Greenberg, Steve

2005-01-01T23:59:59.000Z

115

Phase Calculation and its Use in Alloy Design Program for Nickel ...  

Science Conference Proceedings (OSTI)

PHASE CALCULATION AND ITS USE. IN ALLOY DESIGN PROGRAM FOR NICKEL-BASE SUPERALLOYS. H. Harada, K. Ohno, T. Yamagata,. T. Yokokawa

116

Optimal Design of Demand-Responsive Feeder Transit Services  

E-Print Network (OSTI)

The general public considers Fixed-Route Transit (FRT) to be inconvenient while Demand-Responsive Transit (DRT) provides much of the desired flexibility with a door-to-door type of service. However, FRT is typically more cost efficient than DRT to deploy. Therefore, there is an increased interest in flexible transit services including all types of hybrid services that combine FRT and pure DRT. The demand-responsive feeder transit, also known as Demand-Responsive Connector (DRC), is a flexible transit service because it operates in a demand-responsive fashion within a service area and moves customers to/from a transfer point that connects to a FRT network. In this research we develop analytical models, validated by simulation, to design the DRC system. Feeder transit services are generally operated with a DRC policy which might be converted to a traditional FRT policy for higher demand. By using continuous approximations, we provide an analytical modeling framework to help planners and operators in their choice of the two policies. We compare utility functions of the two policies to derive rigorous analytical and approximate closed-form expressions of critical demand densities. They represent the switching conditions, that are functions of the parameters of each considered scenario, such as the geometry of the service area, the vehicle speed and also the weights assigned to each term contributing to the utility function: walking time, waiting time and riding time. We address the problem faced by planners in determining the optimal number of zones for dividing a service area. We develop analytical models representing the total cost functions balancing customer service quality and vehicle operating cost. We obtain close-form expressions for the FRT and approximation formulas for the DRC to determine the optimal number of zones. Finally we develop a real-case application with collected customer demand data and road network data of El Cenizo, Texas. With our analytical formulas, we obtain the optimal number of zones, and the times for switching FRT and DRC policies during a day. Simulation results considering the road network of El Cenizo demonstrate that our analytical formulas provide good estimates for practical use.

Li, Xiugang

2009-08-01T23:59:59.000Z

117

Modeling Occurrences of Non-VFR Weather: A Case Study for Design of Flight Instruction Programs  

Science Conference Proceedings (OSTI)

Objective methods in which climatology is considered are needed in the design of flight instruction programs. Weather conditions less than the minimum (LM) thresholds designated for Minimum Instructional Visual Flight Rules (MIVFR) were defined ...

Thomas Q. Carney; Robert F. Dale

1981-05-01T23:59:59.000Z

118

Designation Order No. 00-11.00 to the Executive Director of Loan Programs and Director of the Loan Program Guarantee  

Directives, Delegations, and Requirements

Designate each of the Executive Director of Loan Programs and the Director of the Loan Guarantee Program, as the Secretary of Energy's designee, as the term is ...

2010-04-30T23:59:59.000Z

119

Social Welfare Implications of Demand Response Programs in Competitive...  

NLE Websites -- All DOE Office Websites (Extended Search)

Buildings Simulation Tools Sustainable Federal Operations Windows and Daylighting Electricity Grid Demand Response Distributed Energy Electricity Reliability Energy Analysis...

120

SPECIFIC ZIRCONIUM ALLOY DESIGN PROGRAM. First Quarterly Progress Report, February-June 1962  

DOE Green Energy (OSTI)

A program was initiated for the design of steam-service Zr base cladding alloy. Specifications were derived for an acceptable alloy for such service based on considerations of neutron economy, cost, H/sub 2/ embrittlement, corrosion resistance, fabricability, and strength. The selection of the field of alloy compositions having promise for meeting these specifications was made. Thirty-one alloys whose compositions were chosen from the alloy field were arcmelted and are being fabricated to sheet. Specimens cut from the sheet will be tested for response to composition. The response parameters will measure corrosion resistance at 300, 400, and 500 deg C, mechanical properties before and after corrosion exposure, and H/sub 2/ take-up during corrosion. The experiment is designed to permit analysis of the results employing computer programing to determine the optimum composition within the selected alloy field. Fundamental studies in support of the alloy design were also initiated. Film stripping techniques were developed to permit partitioning studies of alloying element between the corrosion film and the alloy substrate. Hydrogen overvoltage measurements were made for the intermetallic phases Zr/sub 2/Cu, Zr/sub 2/Ni, for Zr-90% Nb and for crystal bar Zr. The diffusion of O/sub 2/ in bulk nonstoichiometric ZrO/sub 2/ was measured: D = 0.055 exp (33,400 plus or minus 3,100/RT) for ZrO/sub 1.955/ at 700 to 1000 deg C. The activation energy is in agreement with that for parabolic corrosion of Zr alloys indicating that bulk O/ sub 2/ diffusion in the corrosion films and not short circuiting diffusion paths are rate controlling. Oxygen diffusion in alloy oxide-doped ZrO/sub 2/ is now being studied. (auth)

Klepfer, H.H.; Douglass, D.L.; Armijo, J.S.

1962-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

2012 End-Use Energy Efficiency and Demand Response, EPRI Program 170: Summary of Deliverables  

Science Conference Proceedings (OSTI)

The EPRI research program on End-Use Energy Efficiency and Demand Response (Program 170) is focused on the assessment, testing, and demonstration of energy-efficient and intelligent end-use devices, as well as analytical studies of the economic, environmental, and behavioral aspects of energy efficiency and demand response. The 2012 reports, tools and resources produced in this program are available to employees of funding companies, and can be accessed by clicking on the product number link listed after ..

2013-05-22T23:59:59.000Z

122

Customer response to day-ahead wholesale market electricity prices: Case study of RTP program experience in New York  

Science Conference Proceedings (OSTI)

There is growing interest in policies, programs and tariffs that encourage customer loads to provide demand response (DR) to help discipline wholesale electricity markets. Proposals at the retail level range from eliminating fixed rate tariffs as the default service for some or all customer groups to reinstituting utility-sponsored load management programs with market-based inducements to curtail. Alternative rate designs include time-of-use (TOU), day-ahead real-time pricing (RTP), critical peak pricing, and even pricing usage at real-time market balancing prices. Some Independent System Operators (ISOs) have implemented their own DR programs whereby load curtailment capabilities are treated as a system resource and are paid an equivalent value. The resulting load reductions from these tariffs and programs provide a variety of benefits, including limiting the ability of suppliers to increase spot and long-term market-clearing prices above competitive levels (Neenan et al., 2002; Boren stein, 2002; Ruff, 2002). Unfortunately, there is little information in the public domain to characterize and quantify how customers actually respond to these alternative dynamic pricing schemes. A few empirical studies of large customer RTP response have shown modest results for most customers, with a few very price-responsive customers providing most of the aggregate response (Herriges et al., 1993; Schwarz et al., 2002). However, these studies examined response to voluntary, two-part RTP programs implemented by utilities in states without retail competition.1 Furthermore, the researchers had limited information on customer characteristics so they were unable to identify the drivers to price response. In the absence of a compelling characterization of why customers join RTP programs and how they respond to prices, many initiatives to modernize retail electricity rates seem to be stymied.

Goldman, C.; Hopper, N.; Sezgen, O.; Moezzi, M.; Bharvirkar, R.; Neenan, B.; Boisvert, R.; Cappers, P.; Pratt, D.

2004-07-01T23:59:59.000Z

123

On the design of effective learning materials for supporting self-directed learning of programming  

Science Conference Proceedings (OSTI)

This paper reports on the action research that studies how to implement self-directed learning of programming in the academic context. Based on our findings from the previous steps with this research agenda, we focus on the design of learning materials. ... Keywords: cognitive load theory, functional programming, programming education, self-direction

Ville Tirronen; Ville Isomöttönen

2012-11-01T23:59:59.000Z

124

Federal Tax Incentives for PV: Potential Implications for Program Design  

E-Print Network (OSTI)

than purchase price • In cases where PV programs providethe purchase price in an arms-length transaction Most PVprice, the grant is still considered to be from the PV

Wiser, Ryan; Bolinger, Mark

2006-01-01T23:59:59.000Z

125

Designing a unified programming model for heterogeneous machines  

Science Conference Proceedings (OSTI)

While high-efficiency machines are increasingly embracing heterogeneous architectures and massive multithreading, contemporary mainstream programming languages reflect a mental model in which processing elements are homogeneous, concurrency is limited, ...

Michael Garland; Manjunath Kudlur; Yili Zheng

2012-11-01T23:59:59.000Z

126

A computer program to analyze cogeneration plant heat balances and equipment design  

Science Conference Proceedings (OSTI)

This paper describes a computer program designed to calculate and analyze cogeneration plant heat balances and equipment and to plot heat balance diagrams. For normal design point conditions, the program calculates gas turbine performance, designs a heat recovery boiler to suit the process requirements, calculates a steam turbine performance and deaerator balance to complete the cycle. In addition, the program will calculate off-design performance for a supplementary firing option or for changes in ambient conditions, gas turbine part load or process conditions.

Stewart, J.C.; Hsun, C.F.

1987-01-01T23:59:59.000Z

127

Using DOE Industrial Energy Audit Data for Utility Program Design  

E-Print Network (OSTI)

The U.S. Department of Energy (DOE), Energy Analysis and Diagnostic Center Program has offered no-cost energy conservation audits to industrial plants since 1976. The EADC program has maintained a database of detailed plant and audit information since 1980. In 1992, DOE and Baltimore Gas & Electric Company (BG&E) agreed to conduct a joint demonstration project in which the EADC database would be used to assist BG&E in planning demand-side management (DSM) programs for its industrial customers. BG&E identified a variety of useful applications of the database including: estimating conservation potential, identifying conservation measures for inclusion in programs, target marketing of industries, projecting DSM program impacts, and focusing implementation efforts. Over the course of the project, BG&E identified a variety of strengths and limitations associated with the database when used for utility planning. To encourage the use of the data by other utilities and interested parties, DOE is preparing an EADC database package for general distribution in April 1993.

Glaser, C. J.; Packard, C. P.; Parfomak, P.

1993-03-01T23:59:59.000Z

128

Adaptable architecture : a computational exploration into responsive design systems  

E-Print Network (OSTI)

Based on the fact that architecture is, among other things, the crystallization of a mediation among design intentions (function), meaning and contextual constraints (performance), we as designers are obligated to produce ...

Zulas, Alejandro, 1976-

2004-01-01T23:59:59.000Z

129

A National Forum on Demand Response: Results on What Remains...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Design and Implementation Working Group A National Forum on Demand Response: Results on What Remains to Be Done to Achieve Its Potential - Program Design and Implementation...

130

Low Dose Radiation Research Program: Biological Response of Individual...  

NLE Websites -- All DOE Office Websites (Extended Search)

Response of Individual Cells Following Electron Microbeam Irradiation L. A. Braby and J. R. Ford Texas A&M University, College Station Texas In recent years studies with low doses...

131

Web Design and Web Development Certification Program CORE COURSES FOR BOTH CERTIFICATES (exams required for completion)  

E-Print Network (OSTI)

Web Design and Web Development Certification Program CORE COURSES FOR BOTH CERTIFICATES (exams) (1-day) Introduction to Web Design & Development: Workflow That Works (4-day) HTML & CSS (2-day completion of exam, PS2 can be substituted) (3-day) *Web Graphics & Interface Design Using Photo

Duong, Timothy Q.

132

Advanced Turbine Systems Program: Conceptual design and product development  

SciTech Connect

Objective is to provide the conceptual design and product development plant for an ultra high efficiency, environmentally superior, and cost competitive industrial gas turbine system to be commercialized by the year 2000 (secondary objective is to begin early development of technologies critical to the success of ATS). This report addresses the remaining 7 of the 9 subtasks in Task 8, Design and Test of Critical Components: catalytic combustion, recuperator, high- temperature turbine disc, advanced control system, and ceramic materials.

1996-12-31T23:59:59.000Z

133

Efficient System Design and Sustainable Finance for China's Village Electrification Program: Preprint  

DOE Green Energy (OSTI)

This paper describes a joint effort of the Institute for Electrical Engineering of the Chinese Academy of Sciences (IEE), and the U.S. National Renewable Energy Laboratory (NREL) to support China's rural electrification program. This project developed a design tool that provides guidelines both for off-grid renewable energy system designs and for cost-based tariff and finance schemes to support them. This tool was developed to capitalize on lessons learned from the Township Electrification Program that preceded the Village Electrification Program. We describe the methods used to develop the analysis, some indicative results, and the planned use of the tool in the Village Electrification Program.

Ma, S.; Yin, H.; Kline, D. M.

2006-08-01T23:59:59.000Z

134

Efficient System Design and Sustainable Finance for China's Village Electrification Program: Preprint  

SciTech Connect

This paper describes a joint effort of the Institute for Electrical Engineering of the Chinese Academy of Sciences (IEE), and the U.S. National Renewable Energy Laboratory (NREL) to support China's rural electrification program. This project developed a design tool that provides guidelines both for off-grid renewable energy system designs and for cost-based tariff and finance schemes to support them. This tool was developed to capitalize on lessons learned from the Township Electrification Program that preceded the Village Electrification Program. We describe the methods used to develop the analysis, some indicative results, and the planned use of the tool in the Village Electrification Program.

Ma, S.; Yin, H.; Kline, D. M.

2006-08-01T23:59:59.000Z

135

Abstract --Demand Response (DR) programs are not a new concept; moreover, the key technologies for their implementation  

E-Print Network (OSTI)

. III. DEMAND RESPONSE PROGRAMS UNDER SMARTGRID PARADIGM AND MARKET INTEGRATION. The demand response as SmartGrid). While many of the DR programs under SmartGrid are directed to the distribution sector, DR

Dixon, Juan

136

Asymptotic Bayes Criteria for Nonparametric Response Surface Design  

E-Print Network (OSTI)

Let a design call for rti observations at £/, / = 1, ,sites *r+i> • • •»t \\ rti + • • • + n = n. Consider theobservation at t . The first rti rows of this determinant

Toby Mitchell; Jerome Sacks; Donald Ylvisaker

2011-01-01T23:59:59.000Z

137

TFE design package final report, TFE Verification Program  

DOE Green Energy (OSTI)

The program objective is to demonstrate the technology readiness of a TFE suitable for use as the basic element in a thermionic reactor with electric power output in the 0.5 to 5.0 MW(e) range, and a full-power life of 7 years. A TFE for a megawatt class system is described. Only six cells are considered for simplicity; a megawatt class TFE would have many more cells, the exact number dependent on optimization trade studies.

Not Available

1994-06-01T23:59:59.000Z

138

Early Site Permit Demonstration Program: Station design alternatives report  

SciTech Connect

This report provides the results of investigating the basis for including Station Design Alternatives (SDAs) in the regulatory guidance given for nuclear plant environmental reports (ERs), explains approaches or processes for evaluating SDAs at the early site permit (ESP) stage, and applies one of the processes to each of the ten systems or subsystems considered as SDAS. The key objective o this report s to demonstrate an adequate examination of alternatives can be performed without the extensive development f design data. The report discusses the Composite Suitability Approach and the Established Cutoff Approach in evaluating station design alternatives and selects one of these approaches to evaluate alternatives for each of the plant or station that were considered. Four types of ALWRs have been considered due to the availability of extensive plant data: System 80+, AP600, Advanced Boiling Reactor (ABWR), and Simplified Boiling Water Reactor (SBWR). This report demonstrates the feasibility of evaluating station design alternatives when reactor design detail has not been determined, quantitatively compares the potential ental impacts of alternatives, and focuses the ultimate selection of a alternative on cost and applicant-specific factors. The range of alternatives system is deliberately limited to a reasonable number to demonstrate the or to the three most commonly used at operating plants.

Not Available

1993-03-01T23:59:59.000Z

139

Seismic responses of a pool-type fast reactor with different core support designs  

Science Conference Proceedings (OSTI)

In designing the core support system for a pool-type fast reactor, there are many issues which must be considered in order to achieve an optimum and balanced design. These issues include safety, reliability, as well as costs. Several design options are possible to support the reactor core. Different core support options yield different frequency ranges and responses. Seismic responses of a large pool-type fast reactor incorporated with different core support designs have been investigated. 4 refs., 3 figs.

Wu, Ting-shu; Seidensticker, R.W. (Argonne National Lab., IL (USA))

1989-01-01T23:59:59.000Z

140

Design of innovative dynamic systems for seismic response mitigation  

E-Print Network (OSTI)

Rocking wall systems consist of shear walls, laterally connected to a building, that are moment-released in their strong plane. Their purpose is to mitigate seismic structural response by constraining a building primarily ...

Seymour, Douglas (Douglas Benjamin)

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Passive solar design calculations with the DOE-2 computer program  

DOE Green Energy (OSTI)

The DOE-2 computer program has been modified to improve modeling of passive-solar buildings by the addition of the custom weighting-factor method. The thermal-load and air-temperature calculation procedure in DOE-2 are described. Assumptions inherent in the use of American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) precalculated and the custom weighting factors are discussed. Calculated results from DOE-2 are compared with measured heat-extraction rates and air temperatures for four buildings. These comparisons indicate that DOE-2 can accurately model direct-gain passive buildings and can treat night-ventilative cooling and water walls in an approximate manner.

Kerrisk, J.F.; Moore, J.E.; Schnurr, N.M.; Hunn, B.D.

1980-01-01T23:59:59.000Z

142

An Overview of the Ciao Multiparadigm Language and Program Development Environment and Its Design Philosophy  

Science Conference Proceedings (OSTI)

We describe some of the novel aspects and motivations behind the design and implementation of the Ciao multiparadigm programming system. An important aspect of Ciao is that it provides the programmer with a large number of useful features from different ...

Manuel V. Hermenegildo; Francisco Bueno; Manuel Carro; Pedro López; José F. Morales; German Puebla

2008-06-01T23:59:59.000Z

143

A comprehensive evaluation of the MIT Bachelor of Science in Art and Design program  

E-Print Network (OSTI)

The purpose of this thesis was to conduct a survey that would determine the source of MIT Department of Architecture undergraduate dissatisfaction with the Bachelor of Science in Art and Design (BSAD) degree program. It ...

Most, Jennifer L

2000-01-01T23:59:59.000Z

144

Attempt to develop an ''intelligent'' lens design program  

SciTech Connect

We are developing a Lens Design Program intended to operate without user intervention, and to improve its performace with repeated usage. The methodology and current status will be discussed in this paper. 5 refs., 6 figs.

Viswanathan, V.K.; Bohachevsky, I.O.; Cotter, T.P.

1985-01-01T23:59:59.000Z

145

Forced response predictions in modern centrifugal compressor design  

E-Print Network (OSTI)

A computational interrogation of the time-averaged and time-unsteady flow fields of two centrifugal compressors of nearly identical design (the enhanced, which encountered aeromechanical difficulty, and production, which ...

Smythe, Caitlin J. (Caitlin Jeanne)

2005-01-01T23:59:59.000Z

146

Solar house design program validation. Progress report No. 1  

DOE Green Energy (OSTI)

It is important that the designer of solar heating and/or cooling systems be able to perform rapid and approximate calculations for determining the size of the various components that constitute a solar heating and/or cooling system. These approximation techniques may be used to provide quick checks against more detailed analyses to ensure against possible gross errors, and may also be used to provide information to a potential client. (WDM)

Winn, C B

1975-01-01T23:59:59.000Z

147

Use of program GEOTHM to design and optimize geothermal power cycles  

SciTech Connect

The Lawrence Berkeley Laboratory program GEOTHM has been under development for nearly two years. GEOTHM will design and optimize a wide variety of thermodynamic cycles. The most recent improvements in the GEOTHM program are included. These improvements include: a model for concentrated saline brines and a single step cycle optimization process. Geothermal power cycles are given as examples.

Pines, H.S.; Green, M.A.

1976-06-01T23:59:59.000Z

148

Summary and accomplishments of the ORNL program for nuclear piping design criteria  

SciTech Connect

The ORNL Piping Program was defined and established to develop basic information on the structure behavior of nuclear power plant piping components and to prepare this information in forms suitable for use in design codes and standards. Charts are presented showing the percentage completion of the various program tasks. (DG)

Greenstreet, W.L.

1975-11-01T23:59:59.000Z

149

Advanced turbine systems program conceptual design and product development. Annual report, August 1994--July 1995  

SciTech Connect

Objective of the ATS program is to develop ultra-high efficiency, environmentally superior, and cost-competitive gas turbine systems for base-load application in utility, independent power producer, and industrial markets. This report discusses the major accomplishments achieved during the second year of the ATS Phase 2 program, particularly the design and test of critical components.

1994-10-01T23:59:59.000Z

150

Design evaluation and optimisation in multiple response nonlinear mixed effect models: PFIM 3.0  

Science Conference Proceedings (OSTI)

Nonlinear mixed effect models (NLMEM) with multiple responses are increasingly used in pharmacometrics, one of the main examples being the joint analysis of the pharmacokinetics (PK) and pharmacodynamics (PD) of a drug. Efficient tools for design evaluation ... Keywords: D-optimality, Fisher information matrix, Multiple response models, Nonlinear mixed effect models, Optimal designs, PFIM

Caroline Bazzoli; Sylvie Retout; France Mentré

2010-04-01T23:59:59.000Z

151

Program Led by EM's Carlsbad Field Office Joins Emergency Response in  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Led by EM's Carlsbad Field Office Joins Emergency Response Program Led by EM's Carlsbad Field Office Joins Emergency Response in National Exercise Program Led by EM's Carlsbad Field Office Joins Emergency Response in National Exercise October 30, 2013 - 12:00pm Addthis Hnin Khaing of WIPP Laboratories checks a radiological sample, similar to what would be analyzed in an event like the one simulated in the exercise to test national readiness to respond to a large radiological event. Hnin Khaing of WIPP Laboratories checks a radiological sample, similar to what would be analyzed in an event like the one simulated in the exercise to test national readiness to respond to a large radiological event. CARLSBAD, N.M. - For the first time, a program led by EM's Carlsbad Field Office (CBFO) that coordinates analytical capabilities throughout DOE

152

Program Led by EM's Carlsbad Field Office Joins Emergency Response in  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Led by EM's Carlsbad Field Office Joins Emergency Response Program Led by EM's Carlsbad Field Office Joins Emergency Response in National Exercise Program Led by EM's Carlsbad Field Office Joins Emergency Response in National Exercise October 30, 2013 - 12:00pm Addthis Hnin Khaing of WIPP Laboratories checks a radiological sample, similar to what would be analyzed in an event like the one simulated in the exercise to test national readiness to respond to a large radiological event. Hnin Khaing of WIPP Laboratories checks a radiological sample, similar to what would be analyzed in an event like the one simulated in the exercise to test national readiness to respond to a large radiological event. CARLSBAD, N.M. - For the first time, a program led by EM's Carlsbad Field Office (CBFO) that coordinates analytical capabilities throughout DOE

153

The Kansas City Responsive Infrastructure Manufacturing and Sourcing Program, OAS-L-13-12  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Kansas City Responsive Kansas City Responsive Infrastructure Manufacturing and Sourcing Program OAS-L-13-12 August 2013 Department of Energy Washington, DC 20585 August 1, 2013 MEMORANDUM FOR THE MANAGER, KANSAS CITY FIELD OFFICE FROM: David Sedillo, Director Western Audits Division Office of Inspector General SUBJECT: INFORMATION: Audit Report on "The Kansas City Responsive Infrastructure Manufacturing and Sourcing Program" BACKGROUND The Kansas City Plant, managed and operated by Honeywell Federal Manufacturing & Technologies, LLC (Honeywell), is the Department of Energy's (Department) National Nuclear Security Administration's (NNSA) primary production site for non-nuclear weapon products. The Plant's core mission is to satisfy the Directed Stockpile Work requirements to

154

Configuring load as a resource for competitive electricity markets--Review of demand response programs in the U.S. and around the world  

E-Print Network (OSTI)

MARKETS – REVIEW OF DEMAND RESPONSE PROGRAMS IN THE U.S. ANDMARKETS – REVIEW OF DEMAND RESPONSE PROGRAMS IN THE U.S. ANDend-users they serve. Demand Response Programs, once called

Heffner, Grayson C.

2002-01-01T23:59:59.000Z

155

A programming environment for the design of complex high speed ASICs  

Science Conference Proceedings (OSTI)

A C++ based programming environment for the design of complex high speed ASICs is presented. The design of a 75 Kgate DECT transceiv er is used as a driv er example. Compact descriptions, combined with efficient sim ulationand syn thesis strategies are ... Keywords: congestion, global routing, quadratic placement, relaxed pins, routing models, supply-demand

Patrick Schaumont; Serge Vernalde; Luc Rijnders; Marc Engels; Ivo Bolsens

1998-05-01T23:59:59.000Z

156

Two Controlled Experiments Assessing the Usefulness of Design Pattern Documentation in Program Maintenance  

E-Print Network (OSTI)

Using design patterns is claimed to improve programmer productivity and software quality. Such improvements may manifest both at construction time (in faster and better program design) and at maintenance time (in faster and more accurate program comprehension). This paper focuses on the maintenance context and reports on experimental tests of the following question: Does it help the maintainer if the design patterns in the program code are documented explicitly (using source code comments), compared to a well-commented pro- gram without explicit reference to design patterns? Subjects performed maintenance tasks on two programs ranging from 360 to 560 LOC including comments. Both programs contained design patterns. The controlled variable was whether the use of de- sign patterns was documented explicitly or not. The experiments thus tested whether pattern com- ment lines (PCL) help during maintenance if pat- terns are relevant and sufficient program comments are already present. It turns out that this question is a challenge for the experimental methodology: a setup leading to relevant results is quite difficult to find. We discuss these issues in detail and suggest a general approach to such situations.

Lutz Prechelt; Barbara Unger; Michael Philippsen; Walter Tichy

2001-01-01T23:59:59.000Z

157

District cooling engineering & design program. Final technical report  

SciTech Connect

Phoenix, Arizona is located in the Sonoran desert. Daytime temperatures typically rise to over 100 F during the three summer months. Average and peak temperatures have tended to rise over recent decades. This is generally attributed to what is known as the heat island effect, due to an increase in heat absorbing concrete and a decrease in irrigated farmland in the area. Phoenix is the eighth largest city in the US with a population of just over one million (1,000,000). The metropolitan area is one of the fastest growing in the nation. Over the last ten years its population has increased by over 40%. It is not an exaggeration to say the general availability of refrigerated air conditioning, both for buildings and automobiles has been an important factor enabling growth. The cost of operating public buildings has risen significantly in the last decade. In fiscal year 92/93 the City of Phoenix had energy expenses of over thirty four million dollars ($34,000,000). Because the City was planning a major new construction project, a new high-rise City Hall, it was decided to study and then optimize the design and selection of building systems to minimize long term owning and operating costs. The City Hall was to be constructed in downtown Phoenix. Phoenix presently owns other buildings in the area. A number of large cooling systems serving groups of buildings are currently operating in the Phoenix area. The City requested that the design consultants analyze the available options and present recommendations to the City`s engineering staff.

Not Available

1994-03-01T23:59:59.000Z

158

AN IBM 7090 FORTRAN PROGRAM FOR ASME UNFIRED PRESSURE VESSEL DESIGN AND PRELIMINARY COST ESTIMATION  

SciTech Connect

An IBM 7090 FORTRAN program was written for the preliminary design and cost estimation of unfired pressure vessels with or without a jacket. Both vessel and jacket designs conform to the 1959 ASME Boiler and Pressure Vessel Code, Section VIII, Unfired Pressure Vessels. Vessels and jackets from 5 in. pipe through 84 in. o.d. and 1/4 in. through 1 1/2 in. in metal thickness may be designed by this program as written. Total vessel cost is the sum of metal and fabrication costs, each on a weight basis. (auth)

Prince, C.E.; Milford, R.P.

1962-10-17T23:59:59.000Z

159

DOE Responses to DOE Challenge Home (formerly Builders Challenge) National Program Requirements Public Comments  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- Responses to Draft Specification Comments 1 - Responses to Draft Specification Comments 1 Updated 4/9/2012 DOE Responses to DOE Challenge Home (formerly Builders Challenge) National Program Requirements Public Comments DOE received comments on the draft DOE Challenge Home specifications and requirements from December 15, 2011 through January 31, 2012. This document summarizes the comments received, DOE's responses, and the resulting policy change, if any. All comments were reviewed. Similar comments were grouped together in the responses. Editorial comments and general observations were considered, but are not listed in the responses below unless they involved a significant clarification to the DOE Challenge Home provisions. DOE is not responsible for any typographical errors or omissions.

160

Designation Order No. 00-12.00 to the Executive Director of Loan Programs and Director of the Advanced Technology Vehicles Manufacturing Incentive Program  

Directives, Delegations, and Requirements

Secretary or Energy designates each of the Executive Director of Loan Programs and the Director of the Advanced Technology Vehicles Manufacturing Incentive ...

2010-04-30T23:59:59.000Z

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

PRISM; The plant design concept for the U. S. advanced liquid metal reactor program  

SciTech Connect

The US program for development of an advanced liquid metal reactor (ALMR) is proceeding into a new phase of focused design development. This new phase started at the beginning of 1989; its objective is to complete the conceptual design of the US ALMR, with supporting key feature tests, sufficiently to enter a more detailed design phase and subsequent construction of a prototype reactor plant. A project goal is to demonstrate by actual performance of the reactor its passive, inherent safety features and thereby provide the technical basis for certification of the design by the Nuclear Regulatory Commission (NRC). This paper reports on the PRISM (power reactor inherently safe module) reactor concept which in combination with the IFR (integral fast reactor) metal fuel cycle being developed by Argonne National Laboratory, was selected by DOE in 1988 as the reference design for the US ALMR program.

Berglund, R.C.; Tippets, F.E. (GE Nuclear Energy, Advance Nuclear Technology, San Jose, CA (US))

1989-01-01T23:59:59.000Z

162

DOE-HDBK-1086-95; Table-Top Training Program Design  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

86-95 86-95 April 1995 DOE HANDBOOK TABLE-TOP TRAINING PROGRAM DESIGN U.S. Department of Energy FSC-6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. ERRATA SHEET No. 1 DOE-HDBK-1086-95 Table-Top Training Program Design Page/Section Change Page iii, FOREWORD Delete reference to DOE 5480.18B, Nuclear Facility Training Accreditation Program, and update preparing organization from EH-31 to EH-53 Page 3, Section 2.1.2 Delete reference to DOE 5480.18B, Nuclear Facility Training Accreditation Program. Concluding Material The Preparing Activity was updated from EH-31 to EH-53. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and

163

BridgeGreen : bridging the disconnect between design professionals and resources fro environmentally, socially, and economically responsive architecture  

E-Print Network (OSTI)

Sustainable design, whether referred to as green, high performing, responsible, or environmentally, socially, and economically responsive architecture, is influencing the global building industry. Most major firms of ...

Elbaum, Meredith Sue, 1975-

2003-01-01T23:59:59.000Z

164

SYNCH: A program for design and analysis of synchrotrons and beamlines -- user`s guide  

Science Conference Proceedings (OSTI)

SYNCH is a computer program for use in the design and analysis of synchrotrons, storage rings, and beamlines. It has a large repertoire of commands that can be accessed in a flexible way. The input statements and the results of the calculations they invoke are saved in an internal database so that this information may be shared by other statements. SYNCH is the first accelerator program to organize its input in the form of a language. The statements, which resemble sentences, provide a natural way of describing lattices and invoking relevant calculations. The organization of the program is modular, so that it has been possible to expand its capabilities progressively.

Garren, A.A.; Kenney, A.S.; Courant, E.D.; Russell, A.D.; Syphers, M.J.

1993-12-31T23:59:59.000Z

165

Demand Response Design based on a Stackelberg Game in Smart Grid  

E-Print Network (OSTI)

Demand Response Design based on a Stackelberg Game in Smart Grid Sung-Guk Yoon, Young-June Choi and communications technology (ICT), that is, smart grid. With help of a two-way communication infrastructure, a real- time demand response can be applied. A smart grid network consisting of one retailer and many customers

Bahk, Saewoong

166

Operational Responsibilities of the National Weather Service River and Flood Program  

Science Conference Proceedings (OSTI)

The River and Flood Program in the National Weather Service, in its mission to save lives and property, has the responsibility to gather hydrologic data from a variety of sources and to assemble the data to make timely and reliable hydrologic ...

L.W. Larson; R.L. Ferral; E.T. Strem; A.J. Morin; B. Armstrong; T.R. Carroll; M.D. Hudlow; L.A. Wenzel; G.L. Schaefer; D.E. Johnson

1995-09-01T23:59:59.000Z

167

SOLCOST - Version 3. 0. Solar energy design program for non-thermal specialists  

DOE Green Energy (OSTI)

The SOLCOST solar energy design program is a public domain computerized design tool intended for use by non-thermal specialists to size solar systems with a methodology based on life cycle cost. An overview of SOLCOST capabilities and options is presented. A detailed guide to the SOLCOST input parameters is included. Sample problems showing typical imput decks and resulting SOLCOST output sheets are given. Details of different parts of the analysis are appended. (MHR)

Not Available

1980-05-01T23:59:59.000Z

168

Advanced turbine systems program conceptual design and product development. Quarterly report, August--October 1994  

SciTech Connect

This is a quarterly report on the Westinghouse Electric Corporation Advanced Turbine Systems Program--conceptual design and product development. The topics of the report include the management plan, National Energy Policy Act, selection of natural gas-fired advanced turbine systems, selection of coal-fired advanced turbine systems, market study, systems definition and analysis, design and test of critical components, and plans for the next reporting period.

1994-12-01T23:59:59.000Z

169

A support vector regression based prediction model of affective responses for product form design  

Science Conference Proceedings (OSTI)

In this paper, a state-of-the-art machine learning approach known as support vector regression (SVR) is introduced to develop a model that predicts consumers' affective responses (CARs) for product form design. First, pairwise adjectives were used to ... Keywords: Genetic algorithm, Kansei engineering, Neural network, Product form design, Support vector regression

Chih-Chieh Yang; Meng-Dar Shieh

2010-11-01T23:59:59.000Z

170

Configuring load as a resource for competitive electricity markets--Review of demand response programs in the U.S. and around the world  

Science Conference Proceedings (OSTI)

The restructuring of regional and national electricity markets in the U.S. and around the world has been accompanied by numerous problems, including generation capacity shortages, transmission congestion, wholesale price volatility, and reduced system reliability. These problems have created new opportunities for technologies and business approaches that allow load serving entities and other aggregators to control and manage the load patterns of wholesale and retail end-users they serve. Demand Response Programs, once called Load Management, have re-emerged as an important element in the fine-tuning of newly restructured electricity markets. During the summers of 1999 and 2001 they played a vital role in stabilizing wholesale markets and providing a hedge against generation shortfalls throughout the U.S.A. Demand Response Programs include ''traditional'' capacity reservation and interruptible/curtailable rates programs as well as voluntary demand bidding programs offered by either Load Serving Entities (LSEs) or regional Independent System Operators (ISOs). The Lawrence Berkeley National Lab (LBNL) has been monitoring the development of new types of Demand Response Programs both in the U.S. and around the world. This paper provides a survey and overview of the technologies and program designs that make up these emerging and important new programs.

Heffner, Grayson C.

2002-09-01T23:59:59.000Z

171

START Program: Lower 48 Strategic Technical Assistance Response Team (Office of Indian Energy) (Fact Sheet)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

START Program: 48 Contiguous States START Program: 48 Contiguous States Strategic Technical Assistance Response Team Empowering Indian Country to Energize Future Generations The on-the-ground START program is part of a broader DOE-IE effort to make reliable, accurate technical information and skills-based training available to tribal communities throughout the United States. Ultimately, these efforts will serve to further the Administration and DOE's shared commitment to provide Native American and Alaska Native communities with the tools and resources they need to foster tribal energy self-sufficiency and sustainability, advancing job creation, and enhancing economic competitiveness. The DOE Office of Indian Energy Policy and Programs is charged by Congress to direct, foster, coordinate, and

172

LINEAR-PROGRAMMING DESIGN AND ANALYSIS OF FAST ALGORITHMS FOR MAX 2-CSP  

E-Print Network (OSTI)

LINEAR-PROGRAMMING DESIGN AND ANALYSIS OF FAST ALGORITHMS FOR MAX 2-CSP ALEXANDER D. SCOTT AND GREGORY B. SORKIN Abstract. The class Max (r, 2)-CSP (or simply Max 2-CSP) consists of constraint(G) (13/75 + o(1))m, which gives a faster Max 2-CSP algorithm that uses exponential space: running in time

Scott, Alexander Alexander

173

Wildfire ignition resistant home design(WIRHD) program: Full-scale testing and demonstration final report.  

SciTech Connect

The primary goal of the Wildfire ignition resistant home design(WIRHD) program was to develop a home evaluation tool that could assess the ignition potential of a structure subjected to wildfire exposures. This report describes the tests that were conducted, summarizes the results, and discusses the implications of these results with regard to the vulnerabilities to homes and buildings.

Quarles, Stephen, L.; Sindelar, Melissa

2011-12-13T23:59:59.000Z

174

Market Transformation: A Practical Guide to Designing and Evaluating Energy Efficient Programs  

Science Conference Proceedings (OSTI)

One widely accepted paradigm for energy efficiency marketing is called market transformation. This theory holds that energy efficiency programs should be designed to transform markets by reducing market barriers, thus allowing energy efficient products and services to become widely available and adopted by energy customers. Market transformation theory also states that these market changes should become persistent and self-sustaining.

2001-04-19T23:59:59.000Z

175

Key Issues in the Design of NOx Emission Trading Programs to Reduce Ground-Level Ozone  

Science Conference Proceedings (OSTI)

As NOx control requirements grow more stringent and expensive, interest in emission trading as a means of controlling costs and increasing flexibility has risen. This report provides background information for and analysis of the design of emission trading programs for control of nitrogen oxides (NOx) from stationary sources, including fossil fuel electric generating plants.

1994-10-07T23:59:59.000Z

176

Distributed Solar Incentive Programs: Recent Experience and Best Practices for Design and Implementation  

SciTech Connect

Based on lessons from recent program experience, this report explores best practices for designing and implementing incentives for small and mid-sized residential and commercial distributed solar energy projects. The findings of this paper are relevant to both new incentive programs as well as those undergoing modifications. The report covers factors to consider in setting and modifying incentive levels over time, differentiating incentives to encourage various market segments, administrative issues such as providing equitable access to incentives and customer protection. It also explores how incentive programs can be designed to respond to changing market conditions while attempting to provide a longer-term and stable environment for the solar industry. The findings are based on interviews with program administrators, regulators, and industry representatives as well as data from numerous incentive programs nationally, particularly the largest and longest-running programs. These best practices consider the perspectives of various stakeholders and the broad objectives of reducing solar costs, encouraging long-term market viability, minimizing ratepayer costs, and protecting consumers.

Bird, L.; Reger, A.; Heeter, J.

2012-12-01T23:59:59.000Z

177

An integrated approach to optimise parameter design of multi-response processes based on Taguchi method and artificial intelligence  

Science Conference Proceedings (OSTI)

The Taguchi robust parameter design has been widely used over the past decade to solve many single-response process parameter designs. However, the Taguchi method is unable to deal with multi-response problems that are of main interest today, owing to ... Keywords: Back-propagation neural network, Experimental design, Expert system, Genetic algorithm, Multi-response process, Taguchi method

Tatjana V. Sibalija; Vidosav D. Majstorovic

2012-10-01T23:59:59.000Z

178

Advanced Turbine Systems Program conceptual design and product development. Annual report, August 1993--July 1994  

SciTech Connect

The stated objective of the project was to analyze and evaluate different cycles for the natural gas-fired Advanced Turbine Systems (GFATS) in order to select one that would achieve all of the ATS Program goals. Detailed cycle performance, cost of electricity, and RAM analysis were carried out to provide information on the final selection of the GFATS cycle. To achieve the very challenging goals, innovative approaches and technological advances are required, especially in combustion, aerodynamic design, cooling design, mechanical design, leakage control, materials, and coating technologies.

1994-11-01T23:59:59.000Z

179

ECOWAS Clean Energy Gateway-Policy/ProgramDesign | Open Energy Information  

Open Energy Info (EERE)

ECOWAS Clean Energy Gateway-Policy/ProgramDesign ECOWAS Clean Energy Gateway-Policy/ProgramDesign Jump to: navigation, search Economic Community of West African States (ECOWAS) Clean Energy Gateway Home | About | News | Links | Help | Countries Benin | Burkina Faso | Cape Verde | Gambia | Ghana | Guinea| Guinea-Bissau | Ivory Coast | Liberia | Mali | Niger | Nigeria | Senegal | Sierra Leone | Togo Countries ECREEE light.JPG FBenin.png FBurkinaFaso.png FCapeVerde.png FGambia.png FGhana.png FGuinea.png FGuinea-Bissau.png Benin Burkina Faso Cape Verde Gambia Ghana Guinea Guinea-Bissau FIvoryCoast.png FLiberia.png FMali.png FNiger.png FNigeria.png FSenegal.png FSierraLeone.png FTogo.png Ivory Coast Liberia Mali Niger Nigeria Senegal Sierra Leone Togo Background → Design → Implementation →

180

On the Use of a Mixed Integer Nonlinear Programming Model for Refrigerant Design  

E-Print Network (OSTI)

In this paper, a novel mixed integer nonlinear programming model for single component refrigerant design is presented. At the heart of the approach is a new formulation for structural feasibility that allows multiple bonds, connectivity and isomers. The strategy defines a set of structural groups (consisting of atoms), subsets of which are combined to form refrigerant molecules. Molecules formed this way must obey structural and stability constraints. The design objective is to build a refrigerant molecule that has desired physical properties and performance characteristics. These attributes are formulated as mathematical programming constraints and performance objectives which involve both continuous and integer variables. With the current renewed interest in the environment, the suggested approach is applied to refrigerant design with an environmental constraint. The results indicate the viability and the flexibility of the approach. 1 Introduction The search for new compounds wit...

In International; Nachiket Churi; Luke E. K. Achenie; Copyright Luke; E. K. Achenie

1997-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Designing PV Incentive Programs to Promote System Performance: A Review of Current Practice  

E-Print Network (OSTI)

2006. Celentano, Ron. 2005. “SDF Solar PV Grant Program inSolar Rewards Program Solar PV Rebate Program (Small PVSolar Electric Program Solar PV Grant Program ** Residential

Barbose, Galen; Wiser, Ryan; Bolinger, Mark

2006-01-01T23:59:59.000Z

182

Next generation safeguards initiative (NGSI) program plan for safeguards by design  

Science Conference Proceedings (OSTI)

Safeguards by Design (SBD) is defined as the incorporation of safeguards features early in the design phase of a new nuclear facility in order to avoid the need to redesign the facility at a later date, or retrofit the completed facility. Not only can SBD avoid the need for redesign or retrofit, but consideration of safeguards features early in the facility design effort can provide for a more efficient and effective safeguards design. A program has been initiated by the United States Department of Energy during the past several years to develop, demonstrate and institutionalization SBD. This plan has been developed in parallel with a similar effort at the IAEA while taking into account their achievements and future plans. The United States SBD program is focused on (1) identification of best practices that satisfy existing safeguards requirements, (2) identification of advanced concepts where best practices can be improved, and (3) institutionalizing SBD by gaining its acceptance as a global norm for the design of new nuclear facilities. SBD guidance documents are being prepared as an aid to industry for their design activities, to describe the relationship between requirements, best practices, and advanced concepts. SBD 'lessons learned' studies have been conducted to help identify the existing best practices and potential areas for improvement. Finally, acceptance as a global norm is being pursued by way of international workshops, engagement with industry and the IAEA, and setting an example by way of its use in new nuclear facilities in the United States.

Demuth, Scott F [Los Alamos National Laboratory; Budlong - Sylvester, Kory [Los Alamos National Laboratory; Lockwood, Dunbar [DOE/NA-243

2010-01-01T23:59:59.000Z

183

Advanced Turbine Systems (ATS) program conceptual design and product development. Quarterly report, December 1, 1994--February 28, 1995  

SciTech Connect

Achieving the advanced turbine system goals of 60% efficiency, 8 ppmvd NOx and 10% electric power cost reduction imposes competing characteristics on the gas turbine system. Two basic technical issues arise from this. The turbine inlet temperature of the gas turbine must increase to achieve both efficiency and cost goals. However, higher temperatures move in the direction of increased NOx emission. Improved costing and materials technologies along with creative combustor design can result in solutions to achieve the ultimate goal. The GE Advanced Gas Turbine Development program is focused on two specific products: (1) a 70 MW class industrial gas turbine based on the GE90 core technology utilizing an innovative air cooling methodology; (2) a 200 MW class utility gas turbine based on an advanced GE heavy duty machines utilizing advanced cooling and enhancement in component efficiency. Both of these activities require the identification and resolution of technical issues critical to achieving Advanced Turbine System (ATS) goals. The emphasis for the industrial ATS will be placed upon innovative cycle design and low emission combustion. The emphasis for the utility ATS will be placed upon innovative cycle design and low emission combustion. The emphasis for the utility ATS will be placed on developing a technology base for advanced turbine cooling while utilizing demonstrated and planned improvements in low emissions combustion. Significant overlap in the development programs will allow common technologies to be applied to both products. GE`s Industrial and Power Systems is solely responsible for offering Ge products for the industrial and utility markets. The GE ATS program will be managed fully by this organization with core engine technology being supplied by GE Aircraft Engines (GEAE) and fundamental studies supporting both product developments being conducted by GE Corporate Research and Development (CRD).

1995-12-31T23:59:59.000Z

184

Advanced light water reactor plants system 80+{trademark} design certification program. Annual progress report, October 1, 1993--September 30, 1994  

SciTech Connect

The purpose of this report is to provide a status of the progress that was made towards Design Certification of System 80{sup +}{trademark} during the U.S. government`s 1994 fiscal year. The System 80+ Advanced Light Water Reactor (ALWR) is a 3931 MW (1350 MWe) Pressurized Water Reactor (PWR). The design covers an essentially complete plant. It is based on EPRI ALWR Utility Requirements Document (URD) improvements to the Standardized System 80 Nuclear Steam Supply System (NSSS) in operation at Palo Verde Units 1, 2 and 3. The NSSS is a traditional two-loop arrangement with two steam generators, two hot legs and four cold legs, each with a reactor coolant pump. The System 80+ standard design houses the NSSS in a spherical steel containment vessel which is enclosed in a concrete shield building, thus providing the safety advantages of a dual barrier to radioactivity release. Other major features include an all-digital, human-factors-engineered control room, an alternate electrical AC power source, an In-Containment Refueling Water Storage Tank (IRWST), and plant arrangements providing complete separation of redundant trains in safety systems. Some design enhancements incorporated in the System 80+ design are included in the four units currently under construction in the Republic of Korea. These units and the System 80+ design form the basis of the Korean standardization program. The Nuclear Island portion of the System 80+ standard design has also been offered to the Republic of China, in response to their bid specification for an ALWR. The ABB-CE Standard Safety Analysis Report (CESSAR-DC) was docketed by the Nuclear Regulatory Commission (NRC) in May 1991 and a Draft Safety Evaluation Report (DSER) was issued in October 1992.

Not Available

1995-01-01T23:59:59.000Z

185

Advanced Light Water Reactor Plants System 80+{trademark} Design Certification Program. Annual progress report, October 1, 1992--September 30, 1993  

SciTech Connect

The purpose of this report is to provide a status of the progress that was made towards Design Certification of System 80+{trademark} during the US government`s 1993 fiscal year. The System 80+ Advanced Light Water Reactor (ALWR) is a 3931 MW{sub t} (1350 MWe) Pressurized Water Reactor (PWR). The design consists of an essentially complete plant. It is based on evolutionary improvements to the Standardized System 80 nuclear steam supply system in operation at Palo Verde Units 1, 2, and 3, and the Duke Power Company P-81 balance-of-plant (BOP) that was designed and partially constructed at the Cherokee plant site. The System 80/P-81 original design has been substantially enhanced to increase conformance with the EPRI ALWR Utility Requirements Document (URD). Some design enhancements incorporated in the System 80+ design are included in the four units currently under construction in the Republic of Korea. These units form the basis of the Korean standardization program. The full System 80+ standard design has been offered to the Republic of China, in response to their recent bid specification. The ABB-CE Standard Safety Analysis Report (CESSAR-DC) was submitted to the NRC and a Draft Safety Evaluation Report was issued by the NRC in October 1992. CESSAR-DC contains the technical basis for compliance with the EPRI URD for simplified emergency planning. The Nuclear Steam Supply System (NSSS) is the standard ABB-Combustion Engineering two-loop arrangement with two steam generators, two hot legs and four cold legs each with a reactor coolant pump. The System 80+ standard plant includes a sperical steel containment vessel which is enclosed in a concrete shield building, thus providing the safety advantages of a dual containment.

Not Available

1993-12-31T23:59:59.000Z

186

Advanced Turbine Systems Program, Conceptual Design and Product Development. Task 6, System definition and analysis  

DOE Green Energy (OSTI)

The strategy of the ATS program is to develop a new baseline for industrial gas turbine systems for the 21st century, meeting the buying criteria of industrial gas turbine end users, and having growth potential. These criteria guided the Solar ATS Team in selecting the system definition described in this Topical Report. The key to selecting the ATS system definition was meeting or exceeding each technical goal without negatively impacting other commercial goals. Among the most crucial goals are the buying criteria of the industrial gas turbine market. Solar started by preliminarily considering several cycles with the potential to meet ATS program goals. These candidates were initially narrowed based on a qualitative assessment of several factors such as the potential for meeting program goals and for future growth; the probability of successful demonstration within the program`s schedule and expected level of funding; and the appropriateness of the cycle in light of end users` buying criteria. A first level Quality Function Deployment (QFD) analysis then translated customer needs into functional requirements, and ensured favorable interaction between concept features. Based on this analysis, Solar selected a recuperated cycle as the best approach to fulfilling both D.O.E. and Solar marketing goals. This report details the design and analysis of the selected engine concept, and explains how advanced features of system components achieve program goals. Estimates of cost, performance, emissions and RAMD (reliability, availability, maintainability, durability) are also documented in this report.

NONE

1995-04-01T23:59:59.000Z

187

HTGR process heat program design and analysis. Semiannual progress report, October 1, 1979-March 28, 1980  

SciTech Connect

This report summarizes the results of concept design studies implemented at General Atomic Company (GA) during the first half of FY-80. The studies relate to a plant design for an 842-MW(t) High-Temperature Gas-Cooled Reactor utilizing an intermediate helium heat transfer loop to provide high temperature thermal energy for the production of hydrogen or synthesis gas (H/sub 2/ + CO) by steam-reforming a light hydrocarbon. Basic carbon sources may be coal, residual oil, or oil shale. Work tasks conducted during this period included the 842-MW(t) plant concept design and cost estimate for an 850/sup 0/C reactor outlet temperature. An assessment of the main-loop cooling shutdown system is reported. Major component cost models were prepared and programmed into the Process Heat Reactor Evaluation and Design (PHRED) code.

Not Available

1980-10-01T23:59:59.000Z

188

Advanced Turbine Systems Program conceptual design and product development. Quarterly report, November 1994--January 1995  

SciTech Connect

Objective of Phase II of the ATS Program is to provide the conceptual design and product development plan for anultra high efficiency, environmentally superior and cost competitive industrial gas turbine system to be commercialized by the year 2000. Technical progress covered in this report is confined to Task 4 (conversion to coal) and the nine subtasks under Task 8 (design and test of critical components). These nine subtasks address six ATS technologies: catalytic combustion, recuperator, autothermal fuel reformer, high temperature turbine disc, advanced control system, and ceramic materials.

1995-02-01T23:59:59.000Z

189

Advanced Turbine Systems Program: Conceptual design and product development. Quarterly status report, May--July 1994  

Science Conference Proceedings (OSTI)

The goal of the overall Advanced Turbine Systems (ATS) program is to develop and commercialize ultrahigh-efficiency gas-turbine-based power systems for utility and industrial applications. This contract will complete conceptual design and begin component testing for a utility-scale power system having 60% efficiency. Progress reports are presented for the following tasks: selection of natural gas-fired advance turbine systems (GFATS); selection of coal-fired advanced turbine systems (CFATS); market study; system definition and analysis; and design and test of critical components.

Not Available

1994-09-14T23:59:59.000Z

190

Advanced turbine systems program conceptual design and product development. Quarterly report, August--October, 1994  

SciTech Connect

The objective of Phase 2 of the Advanced Turbine Systems (ATS) Program is to provide the conceptual design and product development plan for an ultra-high efficiency, environmentally superior and cost competitive industrial gas turbine system to be commercialized by the year 2000. A secondary objective is to begin early development of technologies critical to the success of ATS. During this report period, the following tasks were completed: Market study; System definition and analysis; and Integrated program plans. Progress on Task 8, Design and Test of Critical Components, is also discussed. This particular task includes expanded materials and component research covering recuperators, combustion, autothermal fuel reformation, ceramics application and advanced gas turbine system controls.

1995-01-01T23:59:59.000Z

191

General Electric Company design review manual, commercial buildings. National Solar Demonstration Program  

DOE Green Energy (OSTI)

This manual is intended to serve as a guide to the Solar Energy Division of ERDA for preparing instructions for and evaluating the proposals resulting from the issuance of Program Opportunity Notices (PON's) for Commercial Buildings. The manual is meant to amplify Program Opportunity Notice DSE-75-2, with respect to site, building, and system selection and evaluation. The manual contains two major sections, one addressing the project concept and the other the design features. The project concept section provides for a description and evaluation of the site, the commercial building, the system application, the system predicted performance, and the long term economics of the application. The projects could be screened using the information from this section alone. Projects that remain acceptable can be further evaluated through design considerations as outlined in the second section. (WDM)

None

1976-06-01T23:59:59.000Z

192

Design and Implementation of an International Training Program on Repository Development and Management  

Science Conference Proceedings (OSTI)

Korea Hydro and Nuclear Power Co., Ltd. (KHNP) is an electric company in the Republic of Korea with twenty operational nuclear power plants and eight additional units that are either planned or currently under construction. Regulations require that KHNP manage the radioactive waste generated by their nuclear power plants. In the course of planning low, intermediate, and high level waste storage facilities, KHNP sought interaction with an acknowledged expert in the field of radioactive waste management and, consequently, contacted Sandia National Laboratories (SNL). KHNP has contracted with SNL to provide a year long training program on repository science. This paper discusses the design of the curriculum, specific plans for execution of the training program, and recommendations for smooth implementation of international training programs. (authors)

Vugrin, K.W. [Sandia National Laboratories Carlsbad Programs Group, Performance Assessment and Decision Analysis Department, Carlsbad, NM (United States); Twitchell, Ch.A. [Sandia National Laboratories, Carlsbad Programs Group, Center Business Operations Department, Carlsbad, NM (United States)

2008-07-01T23:59:59.000Z

193

Advanced turbine systems program conceptual design and product development. Annual report, August 1993--July 1994  

SciTech Connect

This Yearly Technical Progress Report covers the period August 3, 1993 through July 31, 1994 for Phase 2 of the Advanced Turbine Systems (ATS) Program by Solar Turbines Incorporated under DOE Contract No. DE-AC421-93MC30246. As allowed by the Contract (Part 3, Section J, Attachment B) this report is also intended to fulfill the requirements for a fourth quarterly report. The objective of Phase 2 of the ATS Program is to provide the conceptual design and product development plan for an ultra-high efficiency, environmentally superior and cost-competitive industrial gas turbine system to be commercialized in the year 2000. During the period covered by this report, Solar has completed three of eight program tasks and has submitted topical reports. These three tasks included a Project Plan submission of information required by NEPA, and the selection of a Gas-Fueled Advanced Turbine System (GFATS). In the latest of the three tasks, Solar`s Engineering team identified an intercooled and recuperated (ICR) gas turbine as the eventual outcome of DOE`s ATS program coupled with Solar`s internal New Product Introduction (NPI) program. This machine, designated ``ATS50`` will operate at a thermal efficiency (turbine shaft power/fuel LHV) of 50 percent, will emit less than 10 parts per million of NOx and will reduce the cost of electricity by 10 percent. It will also demonstrate levels of reliability, availability, maintainability, and durability (RAMD) equal to or better than those of today`s gas turbine systems. Current activity is concentrated in three of the remaining five tasks a Market Study, GFATS System Definition and Analysis, and the Design and Test of Critical Components.

1994-11-01T23:59:59.000Z

194

Advanced turbine systems program conceptual design and product development: Quarterly report, November 1993--January 1994  

SciTech Connect

This report describes progress made in the advanced turbine systems program conceptual design and product development. The topics of the report include selection of the Allison GFATS, castcool technology development for industrial engines test plan and schedule, code development and background gathering phase for the ultra low NOx combustion technology task, active turbine clearance task, and water vapor/air mixture cooling of turbine vanes task.

1995-01-01T23:59:59.000Z

195

Program on Technology Innovation: Small Torrefaction Plants Front End Engineering and Design  

Science Conference Proceedings (OSTI)

This report is produced under the EPRI Program on Technology Innovation, and analyzes the viability of developing small torrefaction plants, to be locally deployed close to biomass resource areas, to reduce logistic cost associated to hauling wet raw biomass long distances to large centralized facilities, for production of torrefied chips and pellets. Two plant sizes were selected for a Front Engineering and Design Analysis: 1) A 5/tons/hour product capacity and 2) a 2tons/hour product capacity. The torr...

2010-12-23T23:59:59.000Z

196

Nuclear Power 2010 Program Lessons Learned Report on the Combined Construction and Operating License/Design Certification Demonstration Projects  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Nuclear Power 2010 Program Combined Construction and Operating License & Design Certification Demonstration Projects Lessons Learned Report August 30, 2012 Prepared by Longenecker and Associates DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not

197

Electric-powered passenger vehicle design study program. Task 1. Tradeoff studies  

DOE Green Energy (OSTI)

Using the baseline vehicle and power system design established previously to meet the performance goals of the program, three power system computer simulation programs were prepared for the basic vehicle tradeoff studies. These programs simulate the performance of the power system and vehicle over different types of driving conditions such as maximum power acceleration, deceleration, city driving cycles, and hill climbing, and permit accurate determination of the benefits of the unique hybrid power system, the total energy required for the suburban city driving cycle, and the extremes of the operating envelopes of the components so that component design options can be defined and studied. Component design tradeoff studies were conducted, including sensitivity studies to show the criticality of the various losses and unknowns in the analytical models. Also, preliminary vehicle layout studies were performed to determine the best locations of the power system and the batteries. Three basic design options are identified for further study. Economic studies were initiated using analytical models to establish the complete vehicle weight and cost breakdowns. Preliminary reliability and safety studies were completed, and maintainability and safety certification criteria established. The detailed analysis of the power system has verified the feasibility of the system and of the performance expectations. Also, the feasibility of energy recovery from regenerative braking has been confirmed. The sensitivity analysis of the power system shows that sufficient margin for unknown design variables is provided. The preliminary economic analysis indicates that the most difficult objective of the study will be the selection of the cost and weight relationships which are required to achieve the overall cost objectives.

Rowlett, B.H.

1976-09-16T23:59:59.000Z

198

The U.S. Acid rain program: Key insights from the design, operation, and assessment of a Cap-and-Trade program  

Science Conference Proceedings (OSTI)

The authors' 15 years of experience with the Acid Rain Program suggests that for regional or larger-scale air pollution problems, such as acid rain and pollution transport, a well-designed cap-and-trade program can be cost-effective, flexible, and easy to implement with clear benefits that can be sustained into the future. (author)

Napolitano, Sam; Schreifels, Jeremy; Stevens, Gabrielle; Witt, Maggie; LaCount, Melanie; Forte, Reynaldo; Smith, Kenon

2007-08-15T23:59:59.000Z

199

Sensor-directed response surface sampling designs for characterizing spatial variation in soil properties  

Science Conference Proceedings (OSTI)

In many applied precision farming applications, remotely sensed survey data are collected specifically because these data correlate well with some soil property of interest. Additionally, a general model for the functional relationship between the soil ... Keywords: Precision agriculture, Response surface design, Salinity, Spatial linear model, Variogram

S. M. Lesch

2005-03-01T23:59:59.000Z

200

CSS browser selector plus: a JavaScript library to support cross-browser responsive design  

Science Conference Proceedings (OSTI)

Developing websites for multiples devices have been a rough task for the past ten years. Devices features - such as screen size, resolution, internet access, operating system, etc. - change frequently and new devices emerge every day. Since W3C introduced ... Keywords: cross-browser, javascript, responsive web design, web standards

Richard Duchatsch Johansen, Talita Cristina Pagani Britto, Cesar Augusto Cusin

2013-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

The Impact of Energy Efficiency and Demand Response Programs on the U.S. Electricity Market  

Science Conference Proceedings (OSTI)

This study analyzes the impact of the energy efficiency (EE) and demand response (DR) programs on the grid and the consequent level of production. Changes in demand caused by EE and DR programs affect not only the dispatch of existing plants and new generation technologies, the retirements of old plants, and the finances of the market. To find the new equilibrium in the market, we use the Oak Ridge Competitive Electricity Dispatch Model (ORCED) developed to simulate the operations and costs of regional power markets depending on various factors including fuel prices, initial mix of generation capacity, and customer response to electricity prices. In ORCED, over 19,000 plant units in the nation are aggregated into up to 200 plant groups per region. Then, ORCED dispatches the power plant groups in each region to meet the electricity demands for a given year up to 2035. In our analysis, we show various demand, supply, and dispatch patterns affected by EE and DR programs across regions.

Baek, Young Sun [ORNL; Hadley, Stanton W [ORNL

2012-01-01T23:59:59.000Z

202

Guidebook for Farmstead Demand-Side Management (DSM) program design. [Final report  

SciTech Connect

The acceptance and growth of Demand-Side Management (DSM) continues to increase in the US. According to latest estimates, total expenditures on electric utility DSM programs now exceed $1.2 billion annually, with these investments ranging from 1 to 5 percent of a utility`s gross revenues. In addition, due to increasing environmental concerns and the high cost of new capacity, these expenditure levels are expected to increase. While the vast majority of these DSM programs are directed at the more traditional residential, commercial and industrial market sectors, significant opportunities still exist. One market segment that has not been the focus of attention but a critical sector from an economic development perspective for marry utilities -- is the agricultural and farmstead market. Although the total number of farms in the United States decreased by approximately 5 percent between 1985 and 1989, the land dedicated to farming still accounts for over 995 million acres. Furthermore, the total value of farm output in the United States has been steadily increasing since 1986. The limited penetration of energy efficiency measures in farmsteads provides an excellent opportunity for utilities to expand their DSM programming efforts to capture this ``non-traditional`` market segment, and at the same time assist farms in increasing their efficiency and competitiveness. In marry states, and, in particular New York State, agriculture plays a major economic role. The importance of farms not only from a utility perspective but also from a state and federal perspective cannot be overstated. As such, utilities are in a unique position to facilitate farmstead DSM technology investments in an effort to benefit the farmer (and his profitability), the utility, the state and the country. This guidebook is designed to provide the framework for agricultural demand planning, including market assessment, technology assessment, market penetration analysis and program design.

Rose, M.; Camera, R.K.

1992-02-21T23:59:59.000Z

203

Advanced Turbine Systems Program conceptual design and product development. Quarterly report, November 1993--January 1994  

SciTech Connect

This Quarterly Technical Progress Report covers the period November 1, 1993, through January 31, 1994, for Phase 11 of the Advanced Turbine Systems (ATS) Program by Solar Turbines Incorporated under DOE Contract No. DE-AC421-93MC30246. The objective of this program is to provide the conceptual design and product development plan for an industrial gas turbine system to operate at a thermal efficiency of 50 percent ({open_quotes}ATS50{close_quotes}) with future improvement to 60 percent ({open_quotes}ATS60{close_quotes}). During the prior quarter Solar`s ATS Engine Design Team characterized the intercooled and recuperated (ICR) gas turbine cycle in 1-spool, 2-shaft, and 2-spool 3-shaft arrangements. Fixed and variable geometry free power turbines were compared in both arrangements and sensitivity of all combinations to component performance was determined. Full- and part-load performance were compared over a range of ambient air temperatures. During the quarter just completed, the Team defined four unique and different physical arrangements of the gas turbine components outlined above. These three arrangements were then examined in terms of their ability to support Program goals of thermal efficiency, low emissions, increased reliability, availability and maintainability (RAM), and reduced cost of electrical power production. This work, together with preliminary specification of component cooling needs, suggested that earlier studies of the pressure ratio/firing temperature/thermal efficiency relationship should be re-visited. This accomplished, the effect of total cooling air bleed requirements on thermal efficiency was determined. This will lead to the selection of hot section material capability/cooling air requirements which are able to meet Program goals. As noted in the first quarterly report, where there are apparently conflicting data, later results should take precedence due to the continuing refinement of analytical models.

Karstensen, K.W.

1994-06-01T23:59:59.000Z

204

Design  

NLE Websites -- All DOE Office Websites (Extended Search)

Design Design of a Multithreaded Barnes-Hut Algorithm for Multicore Clusters Technical Report Junchao Zhang and Babak Behzad Department of Computer Science, University of Illinois at Urbana-Champaign {jczhang, bbehza2}@illinois.edu Marc Snir Department of Computer Science, University of Illinois at Urbana-Champaign and MCS Division, Argonne National Laboratory snir@anl.gov Abstract We describe in this paper an implementation of the Barnes-Hut al- gorithm on multicore clusters. Based on a partitioned global ad- dress space (PGAS) library, the design integrates intranode mul- tithreading and internode one-sided communication, exemplifying a PGAS + X programming style. Within a node, the computation is decomposed into tasks (subtasks), and multitasking is used to hide network latency. We study the tradeoffs between locality in private caches and locality in shared caches

205

Design and testing of the magnetic quadrupole for the Heavy Ion Fusion Program  

SciTech Connect

The Heavy Ion Fusion Program at the Lawrence Berkeley Laboratory is conducting experiments in the transport and acceleration of ``driverlike`` beams. The single beam coming from the four-to-one beam combiner will be transported in a lattice of pulsed magnetic quadrupoles. The present beam transport consists of high field, short aspect ratio magnetic quadrupoles to maximize the transportable current. This design could also be converted to be superconducting for future uses in a driver. The pulsed quadrupole will develop a maximum field of two Tesla and will be housed within the induction accelerator cells at the appropriate lattice period. Hardware implementation of the physics requirements and full parameter testing is described.

Benjegerdes, R.; Faltens, A.; Fawley, W.; Peters, C.; Reginato, L.; Stuart, M.

1995-04-01T23:59:59.000Z

206

Advanced turbine systems program conceptual design and product development. Quarterly report, August--October 1995  

Science Conference Proceedings (OSTI)

This report describes the tasks completed for the advanced turbine systems program. The topics of the report include last row turbine blade development, single crystal blade casting development, ceramic materials development, combustion cylinder flow mapping, shroud film cooling, directional solidified valve development, shrouded blade cooling, closed-loop steam cooling, active tip clearance control, flow visualization tests, combustion noise investigation, TBC field testing, catalytic combustion development, optical diagnostics probe development, serpentine channel cooling tests, brush seal development, high efficiency compressor design, advanced air sealing development, advanced coating development, single crystal blade development, Ni-based disc forging development, and steam cooling effects on materials.

NONE

1996-01-01T23:59:59.000Z

207

Assessment of Achievable Potential from Energy Efficiency and Demand Response Programs in the U.S. (2010 - 2030)  

Science Conference Proceedings (OSTI)

This report documents the results of an exhaustive study to assess the achievable potential for electricity energy savings and peak demand reduction from energy efficiency and demand response programs through 2030. This achievable potential represents an estimated range of savings attainable through programs that encourage adoption of energy-efficient technologies, taking into consideration technical, economic, and market constraints.

2009-01-14T23:59:59.000Z

208

Criteria for Selection of Seed Motions to Envelop Design Response Spectra  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Selection of Seed Selection of Seed Motions to Envelop Design Response Spectra DOE Natural Phenomena Hazards Workshop October 25, 2011 Michael Costantino, Thomas Houston, Greg Mertz, Andrew Maham CJCAssociates Introduction * Recently, CJC&A has performed several studies regarding seed record selection used in the development of acceleration time histories for input into seismic analyses. - Primary issue - how does the seed record affect computed structural response. * This presentation is the result of two publications, as well as insights developed from the following DOE projects: - SSI analysis of the Uranium Processing Facility (Y12) - Probabilistic SSI analysis of PF4 (LANL) - Preliminary SSI analysis of CMRR (LANL) 2 CJCAssociates Background * Current design procedures used to develop synthetic time histories for the

209

Advanced Turbine Systems Program -- Conceptual design and product development. Quarterly report, August 1--October 31, 1995  

SciTech Connect

The objective of Phase 2 of the Advanced Turbine Systems (ATS) Program is to provide the conceptual design and product development plan for an ultra high efficiency, environmentally superior and cost competitive industrial gas turbine system to be commercialized by the year 2000. A secondary objective is to begin early development of technologies critical to the success of ATS. This quarterly report, addresses only Task 4, conversion of a gas turbine to a coal-fired gas turbine, which was completed during the quarter and the nine subtasks included in Task 8, design and test of critical components. These nine subtasks address six ATS technologies as follows: catalytic combustion; recuperator; autothermal fuel reformer; high temperature turbine disc; advanced control system (MMI); and ceramic materials.

1995-12-31T23:59:59.000Z

210

Professional Master's Degree in Wetlands Conservation This program is designed for students who want professional training in the  

E-Print Network (OSTI)

want professional training in the multidisciplinary field of wetlands science and management Management POLSCI 786 Policy Evaluation POLSCI 784 Environmental Policy POLSCI 787 Policy Analysis & ChoiceProfessional Master's Degree in Wetlands Conservation This program is designed for students who

Schweik, Charles M.

211

Western states enhanced oil shale recovery program: Shale oil production facilities conceptual design studies report  

DOE Green Energy (OSTI)

This report analyzes the economics of producing syncrude from oil shale combining underground and surface processing using Occidental's Modified-In-Situ (MIS) technology and Lawrence Livermore National Laboratory's (LLNL) Hot Recycled Solids (HRS) retort. These retorts form the basic technology employed for oil extraction from oil shale in this study. Results are presented for both Commercial and Pre-commercial programs. Also analyzed are Pre-commercialization cost of Demonstration and Pilot programs which will confirm the HRS and MIS concepts and their mechanical designs. These programs will provide experience with the circulating Fluidized Bed Combustor (CFBC), the MIS retort, the HRS retort and establish environmental control parameters. Four cases are considered: commercial size plant, demonstration size plant, demonstration size plant minimum CFBC, and a pilot size plant. Budget cost estimates and schedules are determined. Process flow schemes and basic heat and material balances are determined for the HRS system. Results consist of summaries of major equipment sizes, capital cost estimates, operating cost estimates and economic analyses. 35 figs., 35 tabs.

Not Available

1989-08-01T23:59:59.000Z

212

Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings  

Science Conference Proceedings (OSTI)

This paper describes the concept for and lessons from the development and field-testing of an open, interoperable communications infrastructure to support automated demand response (auto-DR). Automating DR allows greater levels of participation, improved reliability, and repeatability of the DR in participating facilities. This paper also presents the technical and architectural issues associated with auto-DR and description of the demand response automation server (DRAS), the client/server architecture-based middle-ware used to automate the interactions between the utilities or any DR serving entity and their customers for DR programs. Use case diagrams are presented to show the role of the DRAS between utility/ISO and the clients at the facilities.

Piette, Mary Ann; Ghatikar, Girish; Kiliccote, Sila; Watson, David; Koch, Ed; Hennage, Dan

2009-05-01T23:59:59.000Z

213

Hazard consistent structural demands and in-structure design response spectra  

Science Conference Proceedings (OSTI)

Current analysis methodology for the Soil Structure Interaction (SSI) analysis of nuclear facilities is specified in ASCE Standard 4. This methodology is based on the use of deterministic procedures with the intention that enough conservatism is included in the specified procedures to achieve an 80% probability of non-exceedance in the computed response of a Structure, System. or Component for given a mean seismic design input. Recently developed standards are aimed at achieving performance-based, risk consistent seismic designs that meet specified target performance goals. These design approaches rely upon accurately characterizing the probability (hazard) level of system demands due to seismic loads consistent with Probabilistic Seismic Hazard Analyses. This paper examines the adequacy of the deterministic SSI procedures described in ASCE 4-98 to achieve an 80th percentile of Non-Exceedance Probability (NEP) in structural demand, given a mean seismic input motion. The study demonstrates that the deterministic procedures provide computed in-structure response spectra that are near or greater than the target 80th percentile NEP for site profiles other than those resulting in high levels of radiation damping. The deterministic procedures do not appear to be as robust in predicting peak accelerations, which correlate to structural demands within the structure.

Houston, Thomas W [Los Alamos National Laboratory; Costantino, Michael C [Los Alamos National Laboratory; Costantino, Carl J [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

214

Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

340E 340E Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings M.A. Piette, G. Ghatikar, S. Kiliccote, D. Watson Lawrence Berkeley National Laboratory E. Koch, D. Hennage Akuacom June 2009 Journal of Computing Science and Information Engineering, Vol. 9, Issue 2 DISCLAIMER This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information,

215

Functional design criteria for the Hazardous Materials Management and Emergency Response (HAMMER) Training Center. Revision 1  

SciTech Connect

Within the United States, there are few hands-on training centers capable of providing integrated technical training within a practical application environment. Currently, there are no training facilities that offer both radioactive and chemical hazardous response training. There are no hands-on training centers that provide training for both hazardous material operations and emergency response that also operate as a partnership between organized labor, state agencies, tribes, and local emergency responders within the US Department of Energy (DOE) complex. Available facilities appear grossly inadequate for training the thousands of people at Hanford, and throughout the Pacific Northwest, who are required to qualify under nationally-mandated requirements. It is estimated that 4,000 workers at the Hanford Site alone need hands-on training. Throughout the Pacific Northwest, the potential target audience would be over 30,000 public sector emergency response personnel, as well as another 10,000 clean-up workers represented by organized labor. The HAMMER Training Center will be an interagency-sponsored training center. It will be designed, built, and operated to ensure that clean-up workers, fire fighters, and public sector management and emergency response personnel are trained to handle accidental spills of hazardous materials. Training will cover wastes at clean-up sites, and in jurisdictions along the transportation corridors, to effectively protect human life, property, and the environment.

Sato, P.K.

1995-03-10T23:59:59.000Z

216

Advanced turbine systems program conceptual design and product development. Annual report, August 1994--July 1995  

SciTech Connect

This report summarizes the tasks completed under this project during the period from August 1, 1994 through July 31, 1994. The objective of the study is to provide the conceptual design and product development plan for an ultra high efficiency, environmentally superior and cost-competitive industrial gas turbine system to be commercialized by the year 2000. The tasks completed include a market study for the advanced turbine system; definition of an optimized recuperated gas turbine as the prime mover meeting the requirements of the market study and whose characteristics were, in turn, used for forecasting the total advanced turbine system (ATS) future demand; development of a program plan for bringing the ATS to a state of readiness for field test; and demonstration of the primary surface recuperator ability to provide the high thermal effectiveness and low pressure loss required to support the proposed ATS cycle.

1995-11-01T23:59:59.000Z

217

Designing Biological Systems for Sustainability and Programmed Environmental Interface (2011 JGI User Meeting)  

Science Conference Proceedings (OSTI)

The U.S. Department of Energy Joint Genome Institute (JGI) invited scientists interested in the application of genomics to bioenergy and environmental issues, as well as all current and prospective users and collaborators, to attend the annual DOE JGI Genomics of Energy & Environment Meeting held March 22-24, 2011 in Walnut Creek, Calif. The emphasis of this meeting was on the genomics of renewable energy strategies, carbon cycling, environmental gene discovery, and engineering of fuel-producing organisms. The meeting features presentations by leading scientists advancing these topics. Pam Silver of Harvard University gives a presentation on "Designing Biological Systems for Sustainability and Programmed Environmental Interface" at the 6th annual Genomics of Energy & Environment Meeting on March 23, 2011

Silver, Pam [Harvard University

2011-03-23T23:59:59.000Z

218

Task 6 -- Advanced turbine systems program conceptual design and product development  

DOE Green Energy (OSTI)

The Allison Engine Company has completed the Task 6 Conceptual Design and Analysis of Phase 2 of the Advanced Turbine System (ATS) contract. At the heart of Allison`s system is an advanced simple cycle gas turbine engine. This engine will incorporate components that ensure the program goals are met. Allison plans to commercialize the ATS demonstrator and market a family of engines incorporating this technology. This family of engines, ranging from 4.9 MW to 12 MW, will be suitable for use in all industrial engine applications, including electric power generation, mechanical drive, and marine propulsion. In the field of electric power generation, the engines will be used for base load, standby, cogeneration, and distributed generation applications.

NONE

1996-01-10T23:59:59.000Z

219

Advanced turbine systems program: Conceptual design and product development. Topical report, November 1993  

SciTech Connect

This report has been prepared by Solar Turbines Incorporated (Solar) in accordance with Task 2 of the Advanced Turbine Systems (ATS) Contract. This report addresses only the work that will be performed under Task 8 (Design and Test of Critical Components) of the Contract. The discussion is divided into four general sections: Project Description; Potential Environmental Impacts; Required Permits and Licenses; and Environmental, Safety and Health (ES and H) Agency Contact Information. As described in further detail herein, the activities to occur during the project (i.e., Task 8) consists primarily of short duration testing of laboratory-scale components (or portions of components) for the ATS program. The testing involved will fall in the following general categories: recuperator, combustor, and blade/airfoil cooling. All activities contemplated will occur at existing facilities. Solar believes that the information in this report supports the conclusion that no significant environmental impacts will be associated with the project.

Wilken, L.S.

1994-01-01T23:59:59.000Z

220

Advanced turbine systems program conceptual design and product development. Quarterly report, February 1995--April 1995  

DOE Green Energy (OSTI)

This Quarterly Technical Progress Report covers the period February 1, 1995, through April 30, 1995, for Phase II of the Advanced Turbine Systems (ATS) Program by Solar Turbines Incorporated under DOE contract No. DE-AC21-93MC30246. The objective of Phase II of the ATS Program is to provide the conceptual design and product development plan for an ultra high efficiency, environmentally superior and cost competitive industrial gas turbine system to be commercialized by the year 2000. A secondary objective is to begin early development of technologies critical to the success of ATS. Tasks 1, 2, 3, 5, 6 and 7 of Phase II have been completed in prior quarters. Their results have been discussed in the applicable quarterly reports and in their respective topical reports. With the exception of Task 7, final editions of these topical reports have been submitted to the DOE. This quarterly report, then, addresses only Task 4 and the nine subtasks included in Task 8, {open_quotes}Design and Test of Critical Components.{close_quotes} These nine subtasks address six ATS technologies as follows: (1) Catalytic Combustion - Subtasks 8.2 and 8.5, (2) Recuperator - Subtasks 8.1 and 8.7, (3) Autothermal Fuel Reformer - Subtask 8.3, (4) High Temperature Turbine Disc - Subtask 8.4, (5) Advanced Control System (MMI) - Subtask 8.6, and (6) Ceramic Materials - Subtasks 8.8 and 8.9. Major technological achievements from Task 8 efforts during the quarter are as follows: (1) The subscale catalytic combustion rig in Subtask 8.2 is operating consistently at 3 ppmv of NO{sub x} over a range of ATS operating conditions. (2) The spray cast process used to produce the rim section of the high temperature turbine disc of Subtask 8.4 offers additional and unplanned spin-off opportunities for low cost manufacture of certain gas turbine parts.

Karstensen, K.W.

1995-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Advanced turbine systems program -- Conceptual design and product development. Final report  

SciTech Connect

This Final Technical Report presents the accomplishments on Phase 2 of the Advanced Turbine Systems (ATS). The ATS is an advanced, natural gas fired gas turbine system that will represent a major advance on currently available industrial gas turbines in the size range of 1--20 MW. This report covers a market-driven development. The Market Survey reported in Section 5 identified the customer`s performance needs. This market survey used analyses performed by Solar turbine Incorporated backed up by the analyses done by two consultants, Research Decision Consultants (RDC) and Onsite Energy Corporation (Onsite). This back-up was important because it is the belief of all parties that growth of the ATS will depend both on continued participation in Solar`s traditional oil and gas market but to a major extent on a new market. This new market is distributed electrical power generation. Difficult decisions have had to be made to meet the different demands of the two markets. Available resources, reasonable development schedules, avoidance of schedule or technology failures, probable acceptance by the marketplace, plus product cost, performance and environmental friendliness are a few of the complex factors influencing the selection of the Gas Fired Advanced Turbine System described in Section 3. Section 4 entitled ``Conversion to Coal`` was a task which addresses the possibility of a future interruption to an economic supply of natural gas. System definition and analysis is covered in Section 6. Two major objectives were met by this work. The first was identification of those critical technologies that can support overall attainment of the program goals. Separate technology or component programs were begun to identify and parameterize these technologies and are described in Section 7. The second objective was to prepare parametric analyses to assess performance sensitivity to operating variables and to select design approaches to meet the overall program goals.

1996-07-26T23:59:59.000Z

222

Enhancing Price Response Programs through Auto-DR: California's 2007 Implementation Experience  

E-Print Network (OSTI)

of Fully Automated Demand Response in Large Facilities.Fully Automated Demand Response Tests in Large Facilities.and Techniques for Demand Response. LBNL Report 59975. May

Wikler, Greg

2008-01-01T23:59:59.000Z

223

What China Can Learn from International Experiences in Developing a Demand Response Program  

E-Print Network (OSTI)

K.C. Mares, D. Shroyer. , 2010. Demand Response andOpen Automated Demand Response Opportunities for DataProcessing Industry Demand Response Participation: A Scoping

Shen, Bo

2013-01-01T23:59:59.000Z

224

Advanced turbine systems program conceptual design and product development. Topical report, April 1995  

Science Conference Proceedings (OSTI)

Allison Engine Company has developed and verified key combustion system technologies to satisfy ATS Phase 2 performance requirements. These activities include the following: demonstration test of an ultra-lean premix module meeting the ATS 8 ppm NOx goal using natural gas fuel; design and fabrication of a second generation premix module for bench test evaluation; bench test verification of catalytically enhanced combustion; and preliminary design of the transition section that guides the combustor discharge flow from the external combustor to the turbine inlet. Allison has been executing a systematic approach in developing the combustion system technologies to insure that the ATS engine includes the benefits of advanced material and low NOx combustion technologies without placing undue risk on the overall engine development program. New technology is most easily assimilated in discrete evolutionary stages; thus Allison has structured the combustion system development plan with a series of increasingly demanding performance evaluations that demonstrate the suitability of the individual technology. The discussion summarizes the progress made in bringing advanced combustion technology to the ATS.

NONE

1996-02-01T23:59:59.000Z

225

US-DOE Fusion-Breeder Program: blanket design and system performance  

SciTech Connect

Conceptual design studies are being used to assess the technical and economic feasibility of fusion's potential to produce fissile fuel. A reference design of a fission-suppressed blanket using conventional materials is under development. Theoretically, a fusion breeder that incorporates this fusion-suppressed blanket surrounding a 3000-MW tandem mirror fusion core produces its own tritium plus 5600 kg of /sup 233/U per year. The /sup 233/U could then provide fissile makeup for 21 GWe of light-water reactor (LWR) power using a denatured thorium fuel cycle with full recycle. This is 16 times the net electric power produced by the fusion breeder (1.3 GWe). The cost of electricity from this fusion-fission system is estimated to be only 23% higher than the cost from LWRs that have makeup from U/sub 3/O/sub 8/ at present costs (55 $/kg). Nuclear performance, magnetohydrodynamics (MHD), radiation effects, and other issues concerning the fission-suppressed blanket are summarized, as are some of the present and future objectives of the fusion breeder program.

Lee, J.D.

1983-01-01T23:59:59.000Z

226

Advanced Turbine Systems (ATS) program conceptual design and product development. Quarterly progress report, December 1, 1995--February 29, 1996  

SciTech Connect

This report describes the overall program status of the General Electric Advanced Gas Turbine Development program, and reports progress on three main task areas. The program is focused on two specific products: (1) a 70-MW class industrial gas turbine based on the GE90 core technology, utilizing a new air cooling methodology; and (2) a 200-MW class utility gas turbine based on an advanced GE heavy-duty machine, utilizing advanced cooling and enhancement in component efficiency. The emphasis for the industrial system is placed on cycle design and low emission combustion. For the utility system, the focus is on developing a technology base for advanced turbine cooling while achieving low emission combustion. The three tasks included in this progress report are on: conversion to a coal-fueled advanced turbine system, integrated program plan, and design and test of critical components. 13 figs., 1 tab.

1997-06-01T23:59:59.000Z

227

Early Site Permit Demonstration Program: Guidelines for determining design basis ground motions. Volume 2, Appendices  

SciTech Connect

This report develops and applies a methodology for estimating strong earthquake ground motion. The motivation was to develop a much needed tool for use in developing the seismic requirements for structural designs. An earthquake`s ground motion is a function of the earthquake`s magnitude, and the physical properties of the earth through which the seismic waves travel from the earthquake fault to the site of interest. The emphasis of this study is on ground motion estimation in Eastern North America (east of the Rocky Mountains), with particular emphasis on the Eastern United States and southeastern Canada. Eastern North America is a stable continental region, having sparse earthquake activity with rare occurrences of large earthquakes. While large earthquakes are of interest for assessing seismic hazard, little data exists from the region to empirically quantify their effects. The focus of the report is on the attributes of ground motion in Eastern North America that are of interest for the design of facilities such as nuclear power plants. This document, Volume II, contains Appendices 2, 3, 5, 6, and 7 covering the following topics: Eastern North American Empirical Ground Motion Data; Examination of Variance of Seismographic Network Data; Soil Amplification and Vertical-to-Horizontal Ratios from Analysis of Strong Motion Data From Active Tectonic Regions; Revision and Calibration of Ou and Herrmann Method; Generalized Ray Procedure for Modeling Ground Motion Attenuation; Crustal Models for Velocity Regionalization; Depth Distribution Models; Development of Generic Site Effects Model; Validation and Comparison of One-Dimensional Site Response Methodologies; Plots of Amplification Factors; Assessment of Coupling Between Vertical & Horizontal Motions in Nonlinear Site Response Analysis; and Modeling of Dynamic Soil Properties.

Not Available

1993-03-18T23:59:59.000Z

228

Design and Implementation of an Open, Interoperable Automated Demand Response Infrastructure  

E-Print Network (OSTI)

of Fully Automated Demand Response in Large Facilities. CEC-Fully Automated Demand Response Tests in Large Facilities.Management and Demand Response in Commercial Building. ,

Piette, Mary Ann; Kiliccote, Sila; Ghatikar, Girish

2008-01-01T23:59:59.000Z

229

Low-Energy Building Design Guidelines: Energy-Efficient Design for New Federal Facilities. Federal Energy Management Program (FEMP) Booklet  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Introduction Introduction Incorporating energy efficiency, renewable energy, and sustainable green design features into all Federal buildings has become a top priority in recent years for facilities managers, designers, contracting officers, and others in government buildings procurement. These progressive design strategies have been formalized through Executive Order 13123 (known as Greening the Government through Efficient Energy Management), which was issued on June 3, 1999. There are significant oppor- tunities to accomplish the goals set forth in the executive order, whether in new building design or in the context of renovations. This guidebook addresses the first category-the design process for new Federal facilities. Because energy-efficient buildings reduce both resource depletion and the

230

Monitoring energy use of copiers to determine program design and potential savings for the Energy Star Copier program  

Science Conference Proceedings (OSTI)

In the past five years, considerable attention has been focused on the electricity use of office equipment in commercial office buildings. Several groups have monitored energy use of PCs, monitors, printers and fax machines. However, little attention has been paid to monitoring energy use of copiers. Procedures for testing energy usage and usage profiles of copiers are needed to make valid comparisons between machines and to determine overall energy use and potential energy savings. In this paper, the authors present a method to analyze the energy use and usage profiles of copiers. This method is determined through long-term measurements from a Watt-hour meter connected to the copier and by measuring light flashes from the copier. Energy use from the copier can also be estimated by using a test procedure developed by Dandridge. Results from using the long term monitoring methods will be presented for several different sized copiers, and compared to the estimated energy use derived from the American Society for Testing and Materials (ASTM) method. After summarizing these results, the authors determine criteria for a program to recognize energy-efficient copiers. These criteria were submitted as an Energy Star Copier program to the Environmental Protection Agency (EPA). The new Energy Star Copier Program was announced in July 1995, with criteria based on these suggestions. Using the final Energy Star Copier program criteria and this data, the authors determine potential future savings for the program. The ability to automatically turn the copier off at night is the greatest energy-saving feature most copiers can have. The best way to reduce overall office costs is to have the copier set automatically to make double-sided copies.

Dandridge, C.B. [ReEnergize Consortium, Berkeley, CA (United States); Norford, L.K. [Massachussetts Institute of Technology, Cambridge, MA (United States); Nordman, B. [Lawrence Berkeley National Lab., CA (United States)

1996-08-01T23:59:59.000Z

231

Advanced Turbine Systems program conceptual design and product development. Quarterly report, August--October 1994  

Science Conference Proceedings (OSTI)

This report addresses progress on Advanced Turbine Systems (ATS) design and testing. The most important program milestone to date occurred during this quarter. Allison successfully tested the prototype ATS high temperature turbine section to the ATS goal of 2600F Turbine Rotor Inlet Temperature. This test represented the first full engine test of the Castcool turbine airfoil cooling system. This contract provided funding for the build and test of the turbine system while other Allison IR and D funding and Navy contract funds provided the design and development successes necessary to advance this technology to the level required for a successful test. A demonstration of this kind shows what a cooperative government/industry initiative can achieve. This test itself was cut short due to a high interstage cavity temperature resulting in remaining budget at completion of test. Allison has decided that the best use of the remaining budget is to develop the manufacturing process for Castcool turbine rotor blades now that the process for the stator vanes has been proven. Development of this process will provide the basis for future engine development of this critical ATS high temperature turbine technology. DOE COR Diane Hooie agreed with this direction and Allison will proceed down this path posthaste. Allison is in the process of requesting a contract extension. Although most tasks will be completed by end of contract there are two areas where additional time is needed: (1) dynamic oxidation testing -- obtaining the goal of 5,000hrs will require an additional 2 months; (2) combustor rig testing of the ``best`` lean pre-mix module will require an additional one month. Addition time will be required to accomplish the reporting task for these efforts.

Not Available

1995-01-01T23:59:59.000Z

232

Impact of Enabling Technologies on Customer Load Curtailment Performance Summer 2001 Results from NYSERDA's PON 585 and 577 Programs and NYISO's Emergency Demand Response Program  

SciTech Connect

This report describes a market and load research study on a small group of participants in the NYISO Emergency Demand Response Program (EDRP) and the NYSERDA Peak Load Reduction and Enabling Technology Program Opportunity Notices. In-depth interviews were conducted with 14 individual customers that participated in the NYISO EDRP program through New York State Electric and Gas (NYSEG), AES NewEnergy, and eBidenergy/ ConsumerPowerLine. These contractors used funding from NYSERDA to apply enabling technologies that were hypothesized to improve customers' ability to curtail load. Both NYSEG and eBidenergy/ConsumerPowerLine offered their customers access to their hourly load data on a day-after basis and, during curtailment events, on a near-real-time basis. Phone interviews were conducted with most customers, however 25% of customers provided initial responses to the survey protocol via email. We then combined the market research information with load data during the curtailment events of August 7-10, 2001 to evaluate the impact of technology on curtailment responses.

Goldman, Charles; Heffner, Grayson; Kintner-Meyer, Michael CW

2002-03-29T23:59:59.000Z

233

California Independent System Operator demand response & proxy demand resources  

Science Conference Proceedings (OSTI)

Demand response programs are designed to allow end use customers to contribute to energy load reduction individually or through a demand response provider. One form of demand response can occur when an end use customer reduces their electrical usage ...

John Goodin

2012-01-01T23:59:59.000Z

234

Design and performance evaluations of generic programming techniques in a R&D prototype of Geant4 physics  

E-Print Network (OSTI)

A R&D project has been recently launched to investigate Geant4 architectural design in view of addressing new experimental issues in HEP and other related physics disciplines. In the context of this project the use of generic programming techniques besides the conventional object oriented is investigated. Software design features and preliminary results from a new prototype implementation of Geant4 electromagnetic physics are illustrated. Performance evaluations are presented. Issues related to quality assurance in Geant4 physics modelling are discussed.

M. G. Pia; P. Saracco; M. Sudhakar; A. Zoglauer; M. Augelli; E. Gargioni; C. H. Kim; L. Quintieri; P. P. de Queiroz Filho; D. de Souza Santos; G. Weidenspointner; M. Begalli

2010-01-15T23:59:59.000Z

235

Analysis of the Costs of a Backlog Project in Response to Recommendation 2 of the 2004 Archives and History Office Program Review Committee Report  

E-Print Network (OSTI)

Analysis of the Costs of a Backlog Project in Response to Recommendation 2 of the 2004 Archives and History Office Program Review Committee Report

O'Hara, Laura

2007-01-01T23:59:59.000Z

236

Social Welfare implications of demand response programs in competitiv e electricity markets  

E-Print Network (OSTI)

markets such as that run by the New York ISO and PJMInterconnection (PJM), and are also consistent with theDR programs of NYISO and PJM. An alternative is a program

Boisvert, Richard N.; Neenan, Bernard F.

2003-01-01T23:59:59.000Z

237

Improving speedup and response times by replicating parallel programs on a SNOW  

Science Conference Proceedings (OSTI)

Idle computation cycles of a shared network of workstations are increasingly being used to run batch parallel programs. For one common paradigm, the batch program task running on an idle workstation is preempted when the owner reclaims the workstation. ...

Gaurav D. Ghare; Scott T. Leutenegger

2004-06-01T23:59:59.000Z

238

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING, AND COST DATA FOR MERCURY CONTROL SYSTEMS  

Science Conference Proceedings (OSTI)

PG&E NEG Salem Harbor Station Unit 1 was successfully tested for applicability of activated carbon injection as a mercury control technology. Test results from this site have enabled a thorough evaluation of mercury control at Salem Harbor Unit 1, including performance, estimated cost, and operation data. This unit has very high native mercury removal, thus it was important to understand the impacts of process variables on native mercury capture. The team responsible for executing this program included plant and PG&E headquarters personnel, EPRI and several of its member companies, DOE, ADA, Norit Americas, Inc., Hamon Research-Cottrell, Apogee Scientific, TRC Environmental Corporation, Reaction Engineering, as well as other laboratories. The technical support of all of these entities came together to make this program achieve its goals. Overall the objectives of this field test program were to determine the mercury control and balance-of-plant impacts resulting from activated carbon injection into a full-scale ESP on Salem Harbor Unit 1, a low sulfur bituminous-coal-fired 86 MW unit. It was also important to understand the impacts of process variables on native mercury removal (>85%). One half of the gas stream was used for these tests, or 43 MWe. Activated carbon, DARCO FGD supplied by NORIT Americas, was injected upstream of the cold side ESP, just downstream of the air preheater. This allowed for approximately 1.5 seconds residence time in the duct before entering the ESP. Conditions tested in this field evaluation included the impacts of the Selective Non-Catalytic Reduction (SNCR) system on mercury capture, of unburned carbon in the fly ash, of adjusting ESP inlet flue gas temperatures, and of boiler load on mercury control. The field evaluation conducted at Salem Harbor looked at several sorbent injection concentrations at several flue gas temperatures. It was noted that at the mid temperature range of 322-327 F, the LOI (unburned carbon) lost some of its ability to capture vapor phase Hg, however activated carbon performed relatively well. At the normal operating temperatures of 298-306 F, mercury emissions from the ESP were so low that both particulate and elemental mercury were ''not detected'' at the detection limits of the Ontario Hydro method for both baseline and injection tests. The oxidized mercury however, was 95% lower at a sorbent injection concentration of 10 lbs/MMacf compared with baseline emissions. When the flue gas temperatures were increased to a range of 343-347 F, mercury removal efficiencies were limited to fly ash LOI, operation of the SNCR system, and flue gas temperature on the native mercury capture without sorbent injection. Listed below are the main conclusions from this program: (1) SNCR on/off test showed no beneficial effect on mercury removal caused by the SNCR system. (2) At standard operating temperatures ({approx} 300 F), reducing LOI from 30-35% to 15-20% had minimal impact on Hg removal. (3) Increasing flue gas temperatures reduced Hg removal regardless of LOI concentrations at Salem Harbor (minimum LOI was 15%). Native mercury removal started to fall off at temperatures above 320 F. ACI effectiveness for mercury removal fell off at temperatures above 340 F. (4) Test method detection limits play an important role at Salem Harbor due to the low residual emissions. Examining the proposed MA rule, both the removal efficiency and the emission concentrations will be difficult to demonstrate on an ongoing basis. (5) Under tested conditions the baseline emissions met the proposed removal efficiency for 2006, but not the proposed emission concentration. ACI can meet the more-stringent 2012 emission limits, as long as measurement detection limits are lower than the Ontario Hydro method. SCEM testing was able to verify the low emissions. For ACI to perform at this level, process conditions need to match those obtained during testing.

Michael D. Durham

2004-10-01T23:59:59.000Z

239

Designing PV Incentive Programs to Promote System Performance: A Review of Current Practice  

E-Print Network (OSTI)

Utility District (SMUD) Xcel Energy Connecticut Clean EnergyCA – LADWP CA – SMUD CO – Xcel CT – CCEF Small PV ProgramCA – LADWP CA – SMUD CO – Xcel CT – CCEF Small PV Program

Barbose, Galen; Wiser, Ryan; Bolinger, Mark

2006-01-01T23:59:59.000Z

240

Designing PV Incentive Programs to Promote System Performance: A Review of Current Practice  

E-Print Network (OSTI)

Program Washington Renewable Energy Production Incentivesfor Renewable Energy October 2006 actual energy productionrenewable energy credits (RECs) through energy production-

Barbose, Galen; Wiser, Ryan; Bolinger, Mark

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Programming  

NLE Websites -- All DOE Office Websites (Extended Search)

Programming for Exascale Computers William Gropp and Marc Snir April 15, 2013 Abstract Exascale systems will present programmers with many challenges. We review the...

242

Near Term Hybrid Passenger Vehicle Development Program. Phase I, Final report. Appendix C: preliminary design data package. Volume II. Appendices  

DOE Green Energy (OSTI)

This appendix to the final report on the Hybrid Passenger Vehicle Development Program contans data on Na-S batteries, Ni-Zn batteries; vehicle body design; tire characteristics; and results of computer simulations of vehicle yaw, pitch, and roll under various driving and aerodynamic conditions. (LCL)

Piccolo, R.

1979-09-11T23:59:59.000Z

243

B.S. in Chemical Science The Chemical Science degree is designed for students who plan programs in fields  

E-Print Network (OSTI)

B.S. in Chemical Science The Chemical Science degree is designed for students who plan programs, and Geology. In addition, Chemical Science can be a valuable major for those interested in business and law. This degree is not intended as a chemical preparation for people who wish to do work directly in Chemistry

Weston, Ken

244

Energy savings from energy-efficient showerheads: REMP case study results, proposed evaluation algorithm, and program design implications  

SciTech Connect

The Bonneville Power Administration (Bonneville) has initiated two field studies of water-saving devices, the Regional End-Use Metering Program (REMP) study conducted by the Pacific Northwest Laboratory (PNL) and the Bonneville/Puget Sound Power and Light (Puget Power) water flow study just being implemented. These studies address the same subject using somewhat different approaches. The objectives of these studies is to provide statistically valid estimates of energy savings from energy-efficient showerheads under known field conditions. These results will be used to infer energy savings from Bonneville`s appliance efficiency program as part of a program impact evaluation. This report has three purposes. The first is to summarize the results of the REMP field study. The second is to introduce and explain the ``energy savings algorithm`` proposed for the Bonneville program impact evaluation. This algorithm will use data from both the REMP and Puget Power studies, as well as appropriate field data offered by participating utilities. The third purpose is to present information that may be useful in reviewing the current Bonneville program design and estimating savings from program design alternatives.

Warwick, W.M.

1993-09-01T23:59:59.000Z

245

Passive Solar Design: Technology Fact Sheet; Office of Building Technology, State and Community Programs (BTS)  

DOE Green Energy (OSTI)

Fact sheet for homeowners and contractors on using passive solar design features in homes can increase energy efficiency and comfort. Topics include design techniques, cost, and passive solar design tools.

Southern Energy Institute

2000-12-14T23:59:59.000Z

246

Program Managers and Project Officers | Scientific and Technical...  

Office of Scientific and Technical Information (OSTI)

individual designated by the program manager and whose assigned responsibilities include developing the programmatic aspects of a proposed announcement, participating in the...

247

West Valley transfer cart control system design description. Environmental Restoration and Waste Management Program  

Science Conference Proceedings (OSTI)

Detail design of the control system for the West Valley Nuclear Services Vitrification Facility transfer cart has been completed by Oak Ridge National Laboratory. This report documents the requirements and describes the detail design of that equipment and control software. Copies of significant design documents including analysis and testing reports and design drawings are included in the Appendixes.

Bradley, E.C.; Crutcher, R.I.; Halliwell, J.W.; Hileman, M.S.; Moore, M.R.; Nodine, R.N.; Ruppel, F.R.; Vandermolen, R.I.

1993-01-01T23:59:59.000Z

248

Program on Technology Innovation: Decision-Centered Guidelines for the Design of Human System Interfaces for Electric Power Industry Applications  

Science Conference Proceedings (OSTI)

Decision-centered guidelines support improved user decision making across a broad range of electric power industry application areas. The guidelines will aid in the design of user-centered human-system interfaces (HSIs), while increasing the beneficial uses of new technologies for electric power generation, transmission, and distribution (GTD) systems. Decision-centered guidelines are applicable to system designs involving new technology that will transform current user tasks, responsibilities, ...

2012-09-24T23:59:59.000Z

249

Refrigerator Efficiency in Ghana: Tailoring an appliance market transformation program design for Africa  

E-Print Network (OSTI)

A Guidebood for Appliances, Equipment, and Lighting, 2ndCollaborative Labeling and Appliance Standards Program (the Potential Impact of Appliance Performance Standards in

Ben Hagan, Essel; Van Buskirk, Robert; Ofosu-Ahenkorah, Alfred; McNeil, Michael A.

2006-01-01T23:59:59.000Z

250

Design and testing of a deep sea formation water and temeperature sampling probe for the Ocean Drilling Program  

E-Print Network (OSTI)

The Ocean Drilling Program is an international research consortium dedicated to exploring the structure and history of earth beneath the oceans. The program receives funds from the National Science Foundation and 18 member countries. Texas A&M University serves as the science operator, drill ship operator, and Gulf Coast Core Repository. The objective of the program is to learn about the geological makeup of the ocean floor and develop a better understanding of how it was formed. Fluid and temperature samples are one means of determining the chemistry of the formation. In order to obtain quality samples a tool must probe into the formation approximately 18 inches and capture a small volume of fluid and record temperatures. The Ocean Drilling Program has developed two such probes, the IPOD in situ Pore Water Sampling Probe (PWS) and the Water Sample and Temperature Probe (WSTP). These probes return samples at near in situ conditions; however, fluid samples typically encounter a pressure drop as they enter the tool. Samples collected using these probes are suspected of giving questionable results due to possible gas/fluid separation as the sample experiences a pressure drop upon entering the probe. Fluid returned at formation pressure is hoped to give scientist a more accurate picture of the formation conditions and allow comparison between samples returned at formation pressure and those returned under partial pressure. The objective of this project was to design, test, and manufacture a probe that would consistently-return fluid and temperature samples at in situ conditions, The project was broken down into two stages, namely the design stage and the testing and manufacturing stage. The design stage was governed by a regimented design methodology. Steps included in the methodology were 1) Need Analysis, 2) Conceptual Design, 3) Conceptual Design Evaluation, and 4) Embodiment Design. The manufacturing and testing stage of the project consisted of full sample system testing and supervision of the manufacturing process. the result of the design process was a sampling system that combined a back pressure piston and metering valve. Full testing of this sampling system showed the sampling system allowed sampling of formation fluid with minimal pressure drop between the formation and the probe. Favorable results of the sampling system allowed for the development of a new probe tip configuration, as well as, a new modularized electronics section. Machine drawings were generated for all components of the tool. Components were then fabricated by a local machine shop. All components under went quality inspection and were then assembled. Full scale testing at the Ocean Drilling Programs Annex is the next step. If successful, the probe is to undergo sea trials in October of 1995.

Fisseler, Patrick James

1995-01-01T23:59:59.000Z

251

Author manuscript, published in "9th International Conference on the Design of Cooperative Systems (COOP'2010) (2010)" Design of a Collaborative Disaster Response Process Management System  

E-Print Network (OSTI)

Abstract We describe in this article a framework for disaster response process management. This framework can be used to develop information systems supporting those processes. It is grounded in several research approaches: literature research, case studies, end user interviews and workshops. We compare disaster response process management with business process management and argue why it is substantial different to it. Another main result of this comparison is that business process management technology, such as flexible workflow systems, are not suitable for disaster response processes. We propose an information system supporting disaster response processes based on our developed framework. Finally we present validation of the information system design and give outlook on our future research.

Jörn Franke; François Charoy

2010-01-01T23:59:59.000Z

252

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING, AND COST DATA FOR MERCURY CONTROL SYSTEMS  

SciTech Connect

PG&E NEG Salem Harbor Station Unit 1 was successfully tested for applicability of activated carbon injection as a mercury control technology. Test results from this site have enabled a thorough evaluation of mercury control at Salem Harbor Unit 1, including performance, estimated cost, and operation data. This unit has very high native mercury removal, thus it was important to understand the impacts of process variables on native mercury capture. The team responsible for executing this program included plant and PG&E headquarters personnel, EPRI and several of its member companies, DOE, ADA, Norit Americas, Inc., Hamon Research-Cottrell, Apogee Scientific, TRC Environmental Corporation, Reaction Engineering, as well as other laboratories. The technical support of all of these entities came together to make this program achieve its goals. Overall the objectives of this field test program were to determine the mercury control and balance-of-plant impacts resulting from activated carbon injection into a full-scale ESP on Salem Harbor Unit 1, a low sulfur bituminous-coal-fired 86 MW unit. It was also important to understand the impacts of process variables on native mercury removal (>85%). One half of the gas stream was used for these tests, or 43 MWe. Activated carbon, DARCO FGD supplied by NORIT Americas, was injected upstream of the cold side ESP, just downstream of the air preheater. This allowed for approximately 1.5 seconds residence time in the duct before entering the ESP. Conditions tested in this field evaluation included the impacts of the Selective Non-Catalytic Reduction (SNCR) system on mercury capture, of unburned carbon in the fly ash, of adjusting ESP inlet flue gas temperatures, and of boiler load on mercury control. The field evaluation conducted at Salem Harbor looked at several sorbent injection concentrations at several flue gas temperatures. It was noted that at the mid temperature range of 322-327 F, the LOI (unburned carbon) lost some of its ability to capture vapor phase Hg, however activated carbon performed relatively well. At the normal operating temperatures of 298-306 F, mercury emissions from the ESP were so low that both particulate and elemental mercury were ''not detected'' at the detection limits of the Ontario Hydro method for both baseline and injection tests. The oxidized mercury however, was 95% lower at a sorbent injection concentration of 10 lbs/MMacf compared with baseline emissions. When the flue gas temperatures were increased to a range of 343-347 F, mercury removal efficiencies were limited to <25%, even at the same sorbent injection concentration. Other tests examined the impacts of fly ash LOI, operation of the SNCR system, and flue gas temperature on the native mercury capture without sorbent injection. Listed below are the main conclusions from this program: (1) SNCR on/off test showed no beneficial effect on mercury removal caused by the SNCR system. (2) At standard operating temperatures ({approx} 300 F), reducing LOI from 30-35% to 15-20% had minimal impact on Hg removal. (3) Increasing flue gas temperatures reduced Hg removal regardless of LOI concentrations at Salem Harbor (minimum LOI was 15%). Native mercury removal started to fall off at temperatures above 320 F. ACI effectiveness for mercury removal fell off at temperatures above 340 F. (4) Test method detection limits play an important role at Salem Harbor due to the low residual emissions. Examining the proposed MA rule, both the removal efficiency and the emission concentrations will be difficult to demonstrate on an ongoing basis. (5) Under tested conditions the baseline emissions met the proposed removal efficiency for 2006, but not the proposed emission concentration. ACI can meet the more-stringent 2012 emission limits, as long as measurement detection limits are lower than the Ontario Hydro method. SCEM testing was able to verify the low emissions. For ACI to perform at this level, process conditions need to match those obtained during testing.

Michael D. Durham

2004-10-01T23:59:59.000Z

253

Robo-Blocks: designing debugging abilities in a tangible programming system for early primary school children  

Science Conference Proceedings (OSTI)

Research on engaging young children in computer programming to develop high-level cognitive skills has suggested that debugging is among the most important actions leading to the development of logical thinking, problem solving, and social interaction ... Keywords: children, debugging, learning, programming, tangible interface

Arnan Sipitakiat; Nusarin Nusen

2012-06-01T23:59:59.000Z

254

Developing an integrated building design tool by coupling building energy simulation and computational fluid dynamics programs  

E-Print Network (OSTI)

Building energy simulation (ES) and computational fluid dynamics (CFD) can play important roles in building design by providing essential information to help design energy-efficient, thermally comfortable and healthy ...

Zhai, Zhiqiang, 1971-

2003-01-01T23:59:59.000Z

255

Designing PV Incentive Programs to Promote System Performance: A Review of Current Practice  

E-Print Network (OSTI)

Clean Energy Group), Mike Taylor Designing PV IncentiveClean Energy States Alliance C ASE S TUDIES OF S TATE S UPPORT FOR R ENEWABLE E NERGY Designing PV Incentive

Barbose, Galen; Wiser, Ryan; Bolinger, Mark

2006-01-01T23:59:59.000Z

256

Advanced turbine systems program conceptual design and product development. Quarterly report, February 1995--April 1995  

Science Conference Proceedings (OSTI)

Research continued on the design of advanced turbine systems. This report describes the design and test of critical components such as blades, materials, cooling, combustion, and optical diagnostics probes.

NONE

1995-06-01T23:59:59.000Z

257

Linking Work Design and Corporate Social Responsibility Through an Exploratory Model for the Interdependency of Work Characteristics and Corporate Social Responsibility Orientation  

E-Print Network (OSTI)

Driven by the demands of drastic changes in today’s nature of work due to globalization and technological advances, researchers have continually revisited, redesigned, and restructured work design processes in a quest to identify the key characteristics that can result in desired organizational outcomes. Specifically, in current times, organizations are looking to develop socially responsible outcomes, otherwise referred as corporate social responsibility (CSR). A possible link between work design and CSR has been postulated by researchers, but few studies have emerged where the associations between work design and CSR factors are examined. The purpose of this study was to explore the link between work design and CSR using a work design-CSR conceptual model that was developed based on previous literature. The model depicted relationships between work design factors and CSR factors. Work design factors included work characteristics and worker characteristics. Work characteristics were measured using task, knowledge, social, and contextual characteristics; while worker characteristics were measured using personality traits. CSR Orientation (CSRO) was used as a reflective indicator of CSR at the individual level. The study sample consisted of 941 job incumbents of a public education institution in Texas. The data were collected using an online survey that included the work design questionnaire, the short Big Five Inventory, and the CSRO questionnaire. The model was tested using Structural Equation Modeling. Based on the results, a significant association between work characteristics and CSRO factors were obtained. As hypothesized, associations were found between task characteristics and profit CSRO, and between social characteristics and legal CSRO and philanthropic CSRO. The knowledge characteristics were found to have negative association to philanthropic CSRO. The findings also suggest that jobs that are high on problem solving and job autonomy had a negative association to philanthropic CSRO. Similarly, as the job complexity increased, individuals’ orientation towards profit making decreased, and information processing was found to be linked to legal compliance. Research and practice implications of these results are discussed.

Kurup, Priya Darshini

2011-12-01T23:59:59.000Z

258

Ocean Thermal Energy Conversion power system development. Phase I: preliminary design. Final report. [ODSP-3 code; OTEC Steady-State Analysis Program  

DOE Green Energy (OSTI)

The following appendices are included; Dynamic Simulation Program (ODSP-3); sample results of dynamic simulation; trip report - NH/sub 3/ safety precautions/accident records; trip report - US Coast Guard Headquarters; OTEC power system development, preliminary design test program report; medium turbine generator inspection point program; net energy analysis; bus bar cost of electricity; OTEC technical specifications; and engineer drawings. (WHK)

Not Available

1978-12-04T23:59:59.000Z

259

DOE Hydrogen and Fuel Cells Program: 2014 Hydrogen Student Design Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

2014 Hydrogen Student Design Contest to Design Drop-In Hydrogen Fueling 2014 Hydrogen Student Design Contest to Design Drop-In Hydrogen Fueling Station Dec 16, 2013 The 10th annual Hydrogen Student Design Contest will challenge student teams to design a transportable, containerized hydrogen fueling station solution. Registration for the contest, supported by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy, is open until January 15, 2014. Through the contest, multidisciplinary student teams will demonstrate their talents in engineering, public planning, architecture, marketing, and entrepreneurship. In previous years, teams have designed fueling stations, airport systems, and green buildings-all using hydrogen. The Grand Prize winning team will receive an expenses-paid trip to present their winning entry to hundreds of industry professionals in a session at

260

Report on Audit of Activities Designed to Recover the Taxpayers' Investment in the Clean Coal Technology Program, IG-0391  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 6, 1996 June 6, 1996 REPLY TO ATTN OF: IG-1 SUBJECT: INFORMATION: Report on "Audit of Department of Energy's Activities Designed to Recover the Taxpayers' Investment in the Clean Coal Technology Program" TO: The Secretary BACKGROUND: In 1985, the Congress directed the Department of Energy to implement a Clean Coal Technology Program. The purpose of this Departmental initiative is to successfully demonstrate a new generation of advanced coal-based technologies. As a part of the program, the Department established a goal to recover an amount up to the taxpayers' investment in each successfully commercialized clean coal technology project. The objectives of the audit were to determine whether clean coal recoupment practices are achieving the Department's

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

FIELD TEST PROGRAM TO DEVELOP COMPREHENSIVE DESIGN, OPERATING, AND COST DATA FOR MERCURY CONTROL SYSTEMS  

SciTech Connect

Brayton Point Unit 1 was successfully tested for applicability of activated carbon injection as a mercury control technology. Test results from this site have enabled a thorough evaluation of the impacts of future mercury regulations to Brayton Point Unit 1, including performance, estimated cost, and operation data. This unit has variable (29-75%) native mercury removal, thus it was important to understand the impacts of process variables and activated carbon on mercury capture. The team responsible for executing this program included: (1) Plant and PG&E National Energy Group corporate personnel; (2) Electric Power Research Institute (EPRI); (3) United States Department of Energy National Energy Technology Laboratory (DOE/NETL); (4) ADA-ES, Inc.; (5) NORIT Americas, Inc.; (6) Apogee Scientific, Inc.; (7) TRC Environmental Corporation; (8) URS Corporation; (9) Quinapoxet Solutions; (10) Energy and Environmental Strategies (EES); and (11) Reaction Engineering International (REI). The technical support of all of these entities came together to make this program achieve its goals. Overall, the objectives of this field test program were to determine the impact of activated carbon injection on mercury control and balance-of-plant processes on Brayton Point Unit 1. Brayton Point Unit 1 is a 250-MW unit that fires a low-sulfur eastern bituminous coal. Particulate control is achieved by two electrostatic precipitators (ESPs) in series. The full-scale tests were conducted on one-half of the flue gas stream (nominally 125 MW). Mercury control sorbents were injected in between the two ESPs. The residence time from the injection grid to the second ESP was approximately 0.5 seconds. In preparation for the full-scale tests, 12 different sorbents were evaluated in a slipstream of flue gas via a packed-bed field test apparatus for mercury adsorption. Results from these tests were used to determine the five carbon-based sorbents that were tested at full-scale. Conditions of interest that were varied included SO{sub 3} conditioning on/off, injection concentrations, and distribution spray patterns. The original test plan called for parametric testing of NORIT FGD carbon at 1, 3, and 10 lbs/MMacf. These injection concentrations were estimated based on results from the Pleasant Prairie tests that showed no additional mercury removal when injection concentrations were increased above 10 lbs/MMacf. The Brayton Point parametric test data indicated that higher injection concentrations would achieve higher removal efficiencies and should be tested. The test plan was altered to include testing at 20 lbs/MMacf. The first test at this higher rate showed very high removal across the second ESP (>80%). Unlike the ''ceiling'' phenomenon witnessed at Pleasant Prairie, increasing sorbent injection concentration resulted in further capture of vapor-phase mercury. The final phase of field-testing was a 10-day period of continuous injection of NORIT FGD carbon. During the first five days, the injection concentration was held at 10 lbs/MMacf, followed by nominally five days of testing at an injection concentration of 20 lbs/MMacf. The mercury removal, as measured by the semi-continuous emission monitors (S-CEM), varied between 78% and 95% during the 10 lbs/MMacf period and increased to >97% when the injection concentration was increased to 20 lbs/MMacf. During the long-term testing period, mercury measurements following EPA's draft Ontario Hydro method were conducted by TRC Environmental Corporation at both 10 and 20 lbs/MMacf test conditions. The Ontario Hydro data showed that the particulate mercury removal was similar between the two conditions of 10 or 20 lbs/MMacf and removal efficiencies were greater than 99%. Elemental mercury was not detected in any samples, so no conclusions as to its removal can be drawn. Removal of oxidized mercury, on the other hand, increased from 68% to 93% with the higher injection concentration. These removal rates agreed well with the S-CEM results.

Michael D. Durham

2005-03-17T23:59:59.000Z

262

What China Can Learn from International Experiences in Developing a Demand Response Program  

E-Print Network (OSTI)

2012. Addressing Electricity Demand through Demand Response:has been driving up the electricity demand while widespreadexperiences in addressing electricity demand This section is

Shen, Bo

2013-01-01T23:59:59.000Z

263

Optimal design of a phase-in emissions trading program with voluntary compliance options  

E-Print Network (OSTI)

In this paper we explore the welfare implications of voluntary compliance within an emissions trading program and derive optimal permits allocations to affected and opti-in sources when the environmental regulator has ...

Montero, Juan Pablo

264

Advanced Turbine Systems program conceptual design and product development. Task 2: Information required for the National Environmental Policy Act  

Science Conference Proceedings (OSTI)

In cooperation with the US Department of Energy`s Morgantown Energy Technology Center, under contract DE-AC21-93MC30247, a Westinghouse Electric led team is working on a 10-year, four-phase Advanced Turbine Systems (ATS) program to develop the technology required to provide a significant increase in natural gas-fired combined cycle power generation plant efficiency. Environmental performance is to be enhanced, and busbar energy costs are to be 10% less than those of current state-of-the-art-turbines. In Phase II of the ATS program, the objective is to develop the conceptual design of this innovative natural-gas-fired advanced turbine system (GFATS) which, in combination with increased firing temperature ({ge}2600{degree}F), increased component efficiencies, and reduced cooling air usage, has the potential of achieving a lower heating value (LHV) plant efficiency in excess of 60%. Other program goals include providing flexibility to burn both natural gas and coal-derived fuels, holding water consumption to levels consistent with cost and efficiency goals, and having improved environmental performance. Phase II also includes development of an integrated plan to commercialize a GFATS by the year 2000, and initiation of R&D on engine components critical to the success of the plan. Figure 1 is the summary program schedule for Task 8; Design and Test of Critical Components.

Not Available

1993-11-01T23:59:59.000Z

265

Pacific Northwest Demand Response Project Lee Hall, BPA Smart Grid Program Manager  

E-Print Network (OSTI)

, and challenging. Bonneville has previously reported to the Council on their role in the regional Smart Grid to reported to the Council on their role in the regional Smart Grid ich includes demand response in 10 to the Council on their role in the regional Smart Grid ich includes demand response in 10 participating

266

2012 CERTS LAAR Program Peer Review - Frequency Response Demand - Jeff Dagle, PNNL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Frequency Responsive Demand Frequency Responsive Demand Jeff Dagle, PE Chief Electrical Engineer Advanced Power & Energy Systems Pacific Northwest National Laboratory (509) 375-3629 jeff.dagle@pnl.gov CERTS Project Meeting Berkeley, CA September 20, 2012 Acknowledgements Montana Tech University MK Donnelly DJ Turdnowski S Mattix 2 Project Objective This project is evaluating the utilization of large numbers of small loads to provide spinning reserve The specific scope of this project is comparing the ability of load to provide equivalent primary frequency response that would be available from conventional generation 3 Utilizing Small Loads for Frequency Responsive Reserves in a Large System Model Objectives: Credible analysis of the feasibility of using load as a frequency responsive

267

Low Dose Radiation Research Program: Low Dose Response of Respiratory Cells  

NLE Websites -- All DOE Office Websites (Extended Search)

Response of Respiratory Cells in Intact Tissues and Reconstituted Response of Respiratory Cells in Intact Tissues and Reconstituted Tissue John Ford Department of Nuclear Engineering Texas A & M University Why this Project? Using the well-established rat trachea model to test the hypothesis that normal respiratory epithelial cells transmit signals to neighboring cells in response to very low dose radiation exposure. Project Goals By comparing the responses shown by cells in these normal rodent respiratory tissues to those seen for human respiratory epithelial cells in reconstituted tissue constructs, it will be possible to better understand the responds in human respiratory cells in vivo. These studies will characterize responses after exposure to a variety of radiation types and dose distributions. Experimental Approach

268

National Security Studies Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

National Security Studies Program National Security Studies Program National Security Studies Program Objective The National Security Studies Program (NSSP) is designed to prepare future leaders of civilian agencies for high-level policy, command, and staff responsibilities. The NSSP focuses on international environments and commercial partnerships. All students successfully completing the program are awarded a Master's degree. The program does not involve a promotion or a change in position. Benefits to the Organization The program prepares federal civilian employees for high-level policy, command, and staff responsibilities. Participants will gain valuable experience in leadership, information strategy, national security studies, military strategy, logistics, economics, industry studies, and more. The

269

Advanced turbine systems program conceptual design and product development. Quarterly report, February, 1996--April, 1996  

SciTech Connect

This paper describes the design and testing of critical gas turbine components. Development of catalytic combustors and diagnostic equipment is included.

1996-07-08T23:59:59.000Z

270

Advanced turbine systems program conceptual design and product development quarterly report, May--July 1995  

Science Conference Proceedings (OSTI)

Progress for the quarter is reported in the areas of system definition and analysis and design and test of critical components.

NONE

1995-08-01T23:59:59.000Z

271

Design of semi-active variable impedance materials using field-responsive fluids  

E-Print Network (OSTI)

In this thesis, I explored the design of a thin variable impedance material using electrorheological (ER) fluid that is intended to be worn by humans. To determine the critical design parameters of this material, the shear ...

Eastman, Douglas Elmer

2004-01-01T23:59:59.000Z

272

Advanced turbine systems program conceptual design and product development. Quarterly report, May--July 1994  

Science Conference Proceedings (OSTI)

This quarter of the ATS program saw progress occur in several areas; An update (Revision A) of the Management Plan was submitted on May 15, 1994. This Plan was updated to reflect two basic changes to the program; 1. Task 8.5 was stopped and remaining funds transferred to the Task 8.lT, the test of the ATS 2600F prototype turbine. 2. Task 8.1B was added to the program. This task is the Build/Teardown of the prototype 260OF turbine. This task is fully funded by Allison and is in-kind cost share replacing cost share lost due to decreases on Allisons overhead rates. It is noted that these changes do not affect either the total value of the program or Allisons 25% cost share. Allison has submitted justification for 2. above. DoE has requested a cost to complete on the program. This is in process and will be completed in August 1994.

Not Available

1994-10-01T23:59:59.000Z

273

START Program: Alaska Strategic Technical Assistance Response Team (Office of Indian Energy) (Fact Sheet)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Empowering Indian Empowering Indian Country to Energize Future Generations The on-the-ground START program is part of a broader DOE-IE effort to make reliable, accurate technical information and skills-based training available to tribal communities throughout the United States. Ultimately, these efforts will serve to further the Administration and DOE's shared commitment to provide Native American and Alaska Native communities with the tools and resources they need to foster tribal energy self-sufficiency and sustainability, advancing job creation, and enhancing economic competitiveness. The DOE Office of Indian Energy Policy and Programs is charged by Congress to direct, foster, coordinate, and implement energy planning, education, management, and programs that

274

Advanced energy design and operation technologies research: Recommendations for a US Department of Energy multiyear program plan  

Science Conference Proceedings (OSTI)

This document describes recommendations for a multiyear plan developed for the US Department of Energy (DOE) as part of the Advanced Energy Design and Operation Technologies (AEDOT) project. The plan is an outgrowth of earlier planning activities conducted for DOE as part of design process research under the Building System Integration Program (BSIP). The proposed research will produce intelligent computer-based design and operation technologies for commercial buildings. In this document, the concept is explained, the need for these new computer-based environments is discussed, the benefits are described, and a plan for developing the AEDOT technologies is presented for the 9-year period beginning FY 1989. 45 refs., 37 figs., 9 tabs.

Brambley, M.R.; Crawley, D.B.; Hostetler, D.D.; Stratton, R.C.; Addision, M.S.; Deringer, J.J.; Hall, J.D.; Selkowitz, S.E.

1988-12-01T23:59:59.000Z

275

California DREAMing: the design of residential demand responsive technology with people in mind  

E-Print Network (OSTI)

to inform people of their energy usage. We tested the systemcertain quality and energy usage standards of variousprice and household energy usage to enable demand response

Peffer, Therese E.

2009-01-01T23:59:59.000Z

276

Advanced Turbine Systems Program conceptual design and product development. Quarterly report, [August 3, 1993--October 31, 1993  

SciTech Connect

This Quarterly Technical Progress Report covers the period August 3 through October 31, 1993, for Phase II of the Advanced Turbine Systems (ATS) Program by Solar Turbines Incorporated under DOE Contract No. DE-AC21-93MC30246. The objective of this program is to provide the conceptual design and product development plan for an industrial gas turbine system to operate at a thermal efficiency of 50 percent and developable to 60 percent. Solar`s ATS Engine Design Team reviewed the intercooled and recuperated (ICR) gas turbine concept defined in the Program proposal, validated certain assumptions associated therewith, and began the process of actualizing this concept in terms of achievable turbomachinery components. Given the probable use of a free power turbine arrangement, both 1-spool and 2-spool compressor arrangements were examined with both fixed and variable turbine geometry. Off-design performance, both part-load and full-load over a range of inlet air temperatures, was examined. During this period certain simplifying assumptions were made regarding the amount of cycle air extracted for use in turbine cooling and the distribution of its return to the cycle. The exact influence of turbine cooling air extraction on cycle performance (thermal efficiency) will be highly dependent upon turbine airfoil material selection, its life/temperature capabilities, etc. Thus, cycle performance will be subject to some degree of change as the design progresses. Even now, improvements made to the cycle performance model will result in variation in presented results. As a general rule, later results will always supersede earlier results when there is an apparent conflict.

Karstensen, K.W.

1994-02-01T23:59:59.000Z

277

Advanced turbine systems program conceptual design and product development. Quarterly report, August 1993--November 1994  

Science Conference Proceedings (OSTI)

This report discusses a series of heat balance programs were developed and reviewed in a Westinghouse Engineering Department meeting. The cycle formats were reviewed and candidate conditions and components selected for additional investigations,for the selection of the Natural Gas-fired Advanced Turbines Systems (GFATS).

Not Available

1993-12-01T23:59:59.000Z

278

Advanced turbine systems program conceptual design and product development. Quarterly report, November 1993--January 1994  

Science Conference Proceedings (OSTI)

This report discusses a series of materials testing programs were developed and reviewed in a Westinghouse Engineering Department meeting. The cycle formats were reviewed and candidate conditions and components selected for additional investigations,for the selection of the Natural Gas-fired Advanced Turbines Systems (GFATS).

Not Available

1994-04-01T23:59:59.000Z

279

Bridging the gap: Designing DSM programs based on the difference between utility and consumer economic perspectives  

SciTech Connect

As utilities investigate ways to implement demand-side management (DSM) programs, the differences between customer and utility economic perspectives can play an important role in assessing the economic benefits of the programs. Because utilities directly bear the cost of new energy sources, energy-efficiency investments that are cost-effective to a utility may not be cost-effective to its customers who usually pay average energy prices and have different economic parameters. This paper discusses the relationship between life-cycle costs and the energy efficiency decisions of home buyers and utilities. It discusses the key factors in a life-cycle cost analysis and how they affect the optimum energy efficiency choice. In addition to discount rates, fuel prices, and fuel price escalation rates, risk adjustments influence the selection of an optimum efficiency level. This paper highlights differences between household and utility perspectives and the reasons why a gap often exists between the home owner`s and utility`s optimum efficiency choice. A case study of an innovative Pacific Northwest manufactured (mobile) home DSM program illustrates the role of consumer and utility perspectives. Prior research showed that regional utilities long-term perspective and economics justified higher energy-efficiency investments than most manufactured home buyers were making. This recent DSM program has addressed both market imperfections and basic economic differences between consumers and utilities by employing a conservation acquisition approach, which had led to a significant market transformation. This program has been very successful at closing the gap between the economic interests of the home buyer and utility.

Lee, A.D.; Chin, R.; Onisko, S.A.

1994-08-01T23:59:59.000Z

280

A Second-Order Cone Programming Approach for Minimax Design of 2-D FIR Filters  

E-Print Network (OSTI)

V8@ 3P6 Email: wslu@ece.uvic.ca Takao Hinamoto Graduate School of Engineering Hiroshima University Higashi-Hiroshima, 739-8527, Japan Email: hinamoto@hiroshima-u.ac.jp Abstract-- A design algorithm based

Lu, Wu-Sheng

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Advanced turbine systems program--conceptual design and product development. Quarterly report, November 1994--January 1995  

SciTech Connect

Research continued in the design and development of advanced gas turbine systems. This report presents progress towards turbine blade development, diffuser development, combustion noise investigations,catalytic combustion development, and diagnostic probe development.

1995-02-01T23:59:59.000Z

282

Low Cost High Performance Generator Technology Program. Volume 2. Design study  

DOE Green Energy (OSTI)

The systems studies directed towards up-rating the performance of an RTG using selenide thermoelectrics and a heat source with improved safety are reported. The resulting generator design, designated LCHPG, exhibits conversion efficiency of greater than 10 percent, a specific power of 3 W/lb., and a cost of $6,000/W(e). In the course of system analyses, the significant development activities required to achieve this performance by the 1980 time period are identified.

Not Available

1975-06-01T23:59:59.000Z

283

Water | Desire: Design of a Responsible Urban Retreat in Georgetown, Washington, DC.  

E-Print Network (OSTI)

??The design of an urban retreat within an industrial building in Georgetown, DC provides an opportunity to experience water in the built environment. The location… (more)

Zimmerli, Tanya

2013-01-01T23:59:59.000Z

284

2012 CERTS LAAR Program Peer Review - Frequency Responsive Load Evaluation and Benefits - Isabelle Snyder, ORNL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Frequency responsive loads Isabelle Snyder, Ph.D. Power and Energy Systems Group ORNL 2 Managed by UT-Battelle for the U.S. Department of Energy Presentation_name Project objective * Study the use of load for frequency regulation: - Identify frequency measurement accuracies based on different approaches - Identify accuracy requirement for frequency responsive load applications - Study the impact of frequency responsive loads on a large system (ERCOT or EI) 3 Managed by UT-Battelle for the U.S. Department of Energy Presentation_name Major technical accomplishments: overview * Identified requirements of measurement devices to satisfy accuracy requirements for frequency measurement * Initiated request for ERCOT and EI models: - ERCOT (market participant's concern about releasing ERCOT

285

Best Practices Guide for Energy-Efficient Data Center Design: Revised March 2011, Federal Energy Management Program (FEMP) (Brochure)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Best Practices Guide Best Practices Guide for Energy-Efficient Data Center Design Revised March 2011 Prepared by the National Renewable Energy Laboratory (NREL), a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy; NREL is operated by the Alliance for Sustainable Energy, LLC. FEDERAL ENERGY MANAGEMENT PROGRAM Acknowledgements | Contacts Acknowledgements This report was prepared by John Bruschi, Peter Rumsey, Robin Anliker, Larry Chu, and Stuart Gregson of Rumsey Engineers under contract to the National Renewable Energy Laboratory. The work was supported by the Federal Energy Management Program led by Will Lintner. Contacts William Lintner Bill Tschudi Otto VanGeet U.S. Department of Energy FEMP Lawrence Berkeley National Laboratory National Renewable Energy Laboratory

286

Technology Development Program for an Advanced Potassium Rankine Power Conversion System Compatible with Several Space Reactor Designs  

SciTech Connect

This report documents the work performed during the first phase of the National Aeronautics and Space Administration (NASA), National Research Announcement (NRA) Technology Development Program for an Advanced Potassium Rankine Power Conversion System Compatible with Several Space Reactor Designs. The document includes an optimization of both 100-kW{sub e} and 250-kW{sub e} (at the propulsion unit) Rankine cycle power conversion systems. In order to perform the mass optimization of these systems, several parametric evaluations of different design options were investigated. These options included feed and reheat, vapor superheat levels entering the turbine, three different material types, and multiple heat rejection system designs. The overall masses of these Nb-1%Zr systems are approximately 3100 kg and 6300 kg for the 100- kW{sub e} and 250-kW{sub e} systems, respectively, each with two totally redundant power conversion units, including the mass of the single reactor and shield. Initial conceptual designs for each of the components were developed in order to estimate component masses. In addition, an overall system concept was presented that was designed to fit within the launch envelope of a heavy lift vehicle. A technology development plan is presented in the report that describes the major efforts that are required to reach a technology readiness level of 6. A 10-year development plan was proposed.

Yoder, G.L.

2005-10-03T23:59:59.000Z

287

Advanced Turbine Systems Program conceptual design and product development: Task 4.0  

Science Conference Proceedings (OSTI)

This Topical Report presents the results of Task 4 of the Westinghouse ATS Program. The purpose of Task 4 is to determine the technical development needs for conversion of the gas-fired ATS (GFATS). Two closely related, advanced, coal-based power plant technologies have been selected for consideration as the CFATS -- air-blown, coal gasification with hot gas cleaning incorporated into an Integrated Gasification Combined Cycle (IGCC), and the Second-Generation Pressurized Fluidized Bed Combustion (PFBC) combined cycle. These are described and their estimated performance and emissions in the CFATS are reported. A development program for the CFATS is described that focuses on major commercialization issues. These issues are in the areas of combustion, flow distribution, structural analysis, and materials selection.

Not Available

1994-06-01T23:59:59.000Z

288

TEMPERATURE-PROGRAMMED DESORPTION: PRINCIPLES, INSTRUMENT DESIGN, AND DEMONSTRATION WITH NAALH4  

DOE Green Energy (OSTI)

This article is a brief introduction to temperature-programmed desorption (TPD), an analytical technique devised to analyze, in this case, materials for their potential as hydrogen storage materials. The principles and requirements of TPD are explained and the different components of a generic TPD apparatus are described. The construction of a modified TPD instrument from commercially available components is reported together with the control and acquisition technique used to create a TPD spectrum. The chemical and instrumental parameters to be considered in a typical TPD experiment and the analytical utility of the technique are demonstrated by the dehydrogenation of titanium-doped NaAlH{sub 4} by means of thermally programmed desorption.

Stowe, A; Ragaiy Zidan, R

2006-11-07T23:59:59.000Z

289

Advanced Turbine Systems Program: Conceptual design and product development. Quarterly report, February--April 1994  

SciTech Connect

Objective (Phase II) is to develop an industrial gas turbine system to operate at a thermal efficiency of 50% (ATS50) with efficiency enhancements to be added as they become possible. During this quarter, Solar`s engine design team has refined both the 1- and 2-spool cycle concepts, to determine sensitivity to key component efficiencies, cooling air usage and origin, and location of compressor surge lines. The refined analysis included more detailed component work such as compressor and turbine design; different speed trade-offs for the low-and high-pressure compressor in the 1-spool configuration were examined for the best overall compressor efficiency. High-temperature and creep testing of recuperator candidate materials continued. Creep, yield, and proportional limit were measured for foil thicknesses 0.0030--0.0050 for Type 347 ss, Inconel 625, and Haynes 230. Combustor design work included preliminary layout of a multi-can annular combustor integrated into the main engine layout. During the subscale catalytic combustion rig testing, NOx emissions < 5 ppmv were measured. Integration of the engine concept designs into the full power plant system designs has started.

Benjamin, G.J.

1994-06-01T23:59:59.000Z

290

Program  

Office of Scientific and Technical Information (OSTI)

Extremophiles 2004 Extremophiles 2004 5th International Conference on Extremophiles SEPTEMBER 19 -23, 2004 CAMBRIDGE, MARYLAND Extremophiles 2004 5th International Conference on Extremophiles © 2004, American Society for Microbiology 1752 N Street, N.W. Washington, DC 20036-2904 Phone: 202-737-3600 World Wide Web: www.asm.org All Rights Reserved Printed in the United States of America ISBN: 1-55581 324-0 TABLE OF CONTENTS General Information Scientific Program Abstracts for Oral Sessions Abstracts for Poster Sessions Index 4 10 18 42 144 4 ASM Conferences EXECUTIVE COMMITTEE Frank Robb, Chair University of Maryland Biotechnology Institute Michael W. Adams University of Georgia Koki Horikoshi Japan Agency for Marine-Earth Science and Technology Robert M. Kelly North Carolina State University Jennifer Littlechild

291

Issues in the design of object-oriented database programming languages  

E-Print Network (OSTI)

We see a trend toward extending object-oriented languages in the direction of databases, and, at the same time, toward extending database systems with object-oriented ideas. On the surface, these two activities seem to be moving in a consistent direction. However, at a deeper level, we see dif-ficulties that may inhibit their ending up at the same point. We feel that many of these difficufties are a result of the underlying assumptions that are inherent in the fields of programming language and database systems research. Many of these assumptions are historical and contribute to a set of cultural biases that often prevent the two communities from interacting as effectively as pos-sible. The purpose of this paper is to try to uncover some of the cultural presuppositions that have inhibited development of a fully integrated database programming language. We have identified database and language features that seem to be difficult to reconcile. We try to uncover the basic problems in these two areas that these features were intended to solve. In order to resolve these problems, we attempt to distinguish fundamental differences from historical artifacts. 1. lntroductlon The database and the programming language communities seem to be moving toward each other in terms of the problems that they are addressing. Database systems have been attempting to increase their power by associating more and more

Toby Bloom; Stanley B. Zdonik

1987-01-01T23:59:59.000Z

292

Utility Position Report on Significant Design Considerations for the Westinghouse AP1000 LLW Management Program  

Science Conference Proceedings (OSTI)

The nuclear power industry has made significant improvements in the performance of radioactive waste operations in the past decade. In order to ensure that utilities are able to take advantage of these cost and performance advances in new plants, EPRI has been leading a team of utility experts in the review of advanced nuclear plant (ANP) radwaste designs. The purpose of this Utility Position Report is to clarify the key recommendations developed by industry experts on the AP1000 design for low-level rad...

2004-12-06T23:59:59.000Z

293

Ecologically responsive urban forms : the design of human settlements in a technologic age  

E-Print Network (OSTI)

The purpose of this work is to present an optimistic view of our future environment. The stimulus to engage in this project is based upon a strong conviction that we share a responsibility to use our technologic expertise ...

Scarpulla, Joseph John

1983-01-01T23:59:59.000Z

294

Isis, Cabbage and Viper : new tools and strategies for designing responsive media  

E-Print Network (OSTI)

Responsive media are media that can sense and react intelligently to factors like presentation conditions or equipment, audience identity or profile, direct interaction, history or anticipation of involvement, and so on. ...

Agamanolis, Stefan Panayiotis

2001-01-01T23:59:59.000Z

295

A framework for understanding and designing partnerships in emergency preparedness and response  

E-Print Network (OSTI)

Using partnerships between the public and private sectors to provide emergency preparedness and response (EPER) functions has become a useful and necessary tool for improving overall emergency management in the United ...

Gustetic, Jennifer L. (Jennifer Leigh)

2007-01-01T23:59:59.000Z

296

System Performance Measurement Supports Design Recommendations for Solar Ventilation Preheat System (Brochure), Federal Energy Management Program (FEMP)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

System Performance System Performance Measurement Supports Design Recommendations for Solar Ventilation Preheat System The U.S. Department of Energy's (DOE) Federal Energy Management Program (FEMP) sponsored the installation of a data monitoring system to analyze the efficiency and performance of a large solar ventilation preheat (SVP) system. The system was installed at a Federal installation to reduce energy consumption and costs and to help meet Federal energy goals and mandates. SVP systems draw ventilation air in through a perforated metal solar collector with a dark color on the south side of a build-

297

Advanced Turbine System (ATS) program conceptual design and product development. Quarterly report, March 1--May 31, 1995  

DOE Green Energy (OSTI)

Achieving the goals of 60% efficiency, 8 ppmvd NOx, and 10% electric power cost reduction imposes competing characteristics on the gas turbine system: the turbine inlet temperature of the gas turbine must increase, leading also to increased NOx emission. However, improved coating and materials technologies along with creative combustor design can result in solutions to achieve the ultimate goal. The program is focused on two specific products: a 70MW class industrial gas turbine based on the GE90 core technology utilizing an innovative air cooling technology, and a 200MW class utility gas turbine based on an advanced GE heavy duty machine utilizing advanced cooling and enhancement in component efficiency.

NONE

1995-12-31T23:59:59.000Z

298

CUSTOMER RESPONSE TO BESTPRACTICES TRAINING AND SOFTWARE TOOLS PROVIDED BY DOE'S INDUSTRIAL TECHNOLOGIES PROGRAM  

Science Conference Proceedings (OSTI)

The BestPractices program area, which has evolved into the Save Energy Now (SEN) Initiative, is a component of the U.S. Department of Energy's (DOE's) Industrial Technologies Program (ITP) that provides technical assistance and disseminates information on energy-efficient technologies and practices to U.S. industrial firms. The BestPractices approach to information dissemination includes conducting training sessions which address energy-intensive systems (compressed air, steam, process heat, pumps, motors, and fans) and distributing DOE software tools on those same topics. The current report documents a recent Oak Ridge National Laboratory (ORNL) study undertaken to determine the implementation rate, attribution rate, and reduction factor for industrial end-users who received BestPractices training and registered software in FY 2006. The implementation rate is the proportion of service recipients taking energy-saving actions as a result of the service received. The attribution rate applies to those individuals taking energy-saving actions as a result of the services received and represents the portion of the savings achieved through those actions that is due to the service. The reduction factor is the saving that is realized from program-induced measures as a proportion of the potential savings that could be achieved if all service recipients took action. In addition to examining those factors, the ORNL study collected information on selected characteristics of service recipients, the perceived value of the services provided, and the potential energy savings that can be achieved through implementation of measures identified from the training or software. Because the provision of training is distinctly different from the provision of software tools, the two efforts were examined independently and the findings for each are reported separately.

Schweitzer, Martin [ORNL; Martin, Michaela A [ORNL; Schmoyer, Richard L [ORNL

2008-03-01T23:59:59.000Z

299

Southwestern Public Service Company Solar Repowering Program. Volume 1. Conceptual design and evaluation. Final technical report  

DOE Green Energy (OSTI)

The detailed conceptual design, subsystem characteristics, economic analysis, development plan, and user's assessment of repowering Southwest Public Service Company's Plant X located south of Amarillo, Texas, with a tower focus power plant are presented. The plant will utilize liquid sodium heat transfer fluids, thermal storage tanks, and a steam generator/turbine. Detailed economic and cost data are included. (WHK)

Not Available

1980-07-01T23:59:59.000Z

300

Materials Reliability Program: Updated B&W Design Information for the Issue Management Tables (MRP-157)  

Science Conference Proceedings (OSTI)

Industry has developed a Degradation Matrix (DM) and a set of Issue Management Tables (IMTs) to summarize information on the safety and operability implications of potential degradation of metallic components in the reactor coolant system (RCS) of nuclear power plants. This report updates B&W-design component information for use in IMTs.

2005-10-24T23:59:59.000Z

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Low Dose Radiation Research Program: Low-Dose Dose-Response of  

NLE Websites -- All DOE Office Websites (Extended Search)

Low-Dose Dose-Response of Proliferating Human Cells Exposed to Low Low-Dose Dose-Response of Proliferating Human Cells Exposed to Low Dose Rate g-Radiation. Authors: Louise Enns,1 Michael Weinfeld,1 Albert Murtha,1 and Kenneth Bogen2 Institutions: 1Cross Cancer Institute and 2Lawrence Livermore National Laboratory. Clinical and environmental exposure to ionizing radiation rarely exceeds 200 cGy. To examine cell proliferation at early times (up to 5 days) post-irradiation, we are utilizing an assay in which single cells encapsulated within ~30- to 70-µm-diameter agarose gel microdrops (GMDs) are exposed and cultured for 4 days at 37°C, then analyzed by flow cytometry (FC). Clonogenic proliferation is measured as the fraction of occupied GMDs containing multicellular microcolonies after 4 days in culture. This assay was applied to human A549 lung cells exposed to gamma

302

Low Dose Radiation Research Program: Mechanisms of Tissue Response to Low  

NLE Websites -- All DOE Office Websites (Extended Search)

Tissue Response to Low Dose Radiation Tissue Response to Low Dose Radiation Mary Helen Barcellos-Hoff Lawrence Berkeley National Laboratory Why This Project? In the past, the effects of ionizing radiation on humans has been attributed in great part to its ability to damage DNA, which transmits information from cell to cell, and generation to generation. Damaged DNA can lead to cell death or perpetuate the damage to daughter cells and to future generations. In addition to the information contained with the genome (i.e., DNA sequence), information directing cell behavior and tissue function is also stored outside the DNA. The success in cloning sheep from the DNA contained in the nucleus of an adult cell shows how important signals from the outside are in defining how the genome is expressed. This

303

Low Dose Radiation Research Program: Checkpoint Responses and Repair of a  

NLE Websites -- All DOE Office Websites (Extended Search)

Checkpoint Responses and Repair of a Broken Chromosome in Budding Checkpoint Responses and Repair of a Broken Chromosome in Budding Yeast. Authors: André Walther, Mreshwar B. Vaze, Anna Malkova, Grzegorz Ira, Xuan Wang, Jung-Ae Kim, Neal Sugawara, James E. Haber Brandeis University, Waltham, Massachusetts We have studied how yeast cells respond to the creation of a single double-strand break (DSB) by using a site-specific endonuclease to create one (or more) DSBs. In collaboration with R. Schroff, M. Licheten and W. Bonner (NIH) we have shown that a single DSB rapidly becomes associated with histone H2AX-phosphorylation (y-H2AX) covering a distance of about 25 kb on either side of the DSB. The drop-off in phosphorylation is not attributable to specific boundary sequences. y-H2AX can be phosphorylated by either ATR (Mec1) or ATM (Tel1) protein kinases. A mutation that removes

304

Materials of interaction : responsive materials in the design of transformable interactive surfaces  

E-Print Network (OSTI)

Materials that embody computational properties are reshaping the ways in which we design, interact and communicate. This thesis looks at the topic of form transformation and how to bring the programmability and versatility ...

Coelho, Marcelo

2008-01-01T23:59:59.000Z

305

Materials Reliability Program: PWR Bottom Mounted Nozzle (BMN) Issue Response Handbook (MRP-372)  

Science Conference Proceedings (OSTI)

Resolution of a case of primary water stress corrosion cracking (PWSCC) detected in a bottom mounted nozzle (BMN) could be expected to require substantial utility resources, even if only a single nozzle were to be affected, because of the challenges in accessing it in pressurized water reactors (PWRs) to perform inspections and repairs. This Handbook compiles the available knowledge and reference information to guide utility development of a site-specific response plan to an emergent BMN ...

2013-11-14T23:59:59.000Z

306

Materials Reliability Program: High-Strength Structural Bolting and Nickel-Base Alloy Components in B&W-Design Pressurized Water Rea ctor Internals (MRP-273)  

Science Conference Proceedings (OSTI)

This document summarizes information pertinent to the seven currently operating B&W-design 177-FA (fuel assembly) pressurized water reactors (PWRs) for the EPRI Materials Reliability Program (MRP).

2010-12-23T23:59:59.000Z

307

Social Welfare implications of demand response programs in competitive electricity markets  

SciTech Connect

The price volatility exhibited by wholesale electricity markets has stymied the movement to restructure the industry, and may derail it altogether. Market designers argue that prices are superior to regulation for directing long-term investments to the proper location and function, and that price volatility is a natural manifestation of a robustly competitive market. However, episodes of prices that soar to previously unimaginable heights try customers' patience and cause policy makers to reconsider if the prize is worth the consequences.

Boisvert, Richard N.; Neenan, Bernard F.

2003-08-01T23:59:59.000Z

308

Development of Designer Diamond Anvils for High Pressure-High-Temperature Experiments in Support of the Stockpile Stewardship Program  

DOE Green Energy (OSTI)

The focus of this program at the University of Alabama at Birmingham (UAB) is to develop the next generation of designer diamond anvils that can perform simultaneous joule heating and temperature profile measurements in a diamond anvil cell. A series of tungsten-rhenium thermocouples will be fabricated onto to the anvil and encapsulated by a chemical vapor deposited diamond layer to allow for a complete temperature profile measurement across the anvil. The tip of the diamond anvil will be engineered to reduce the thermal conductivity so that the tungsten-heating coils can be deposited on top of this layer. Several different approaches will be investigated to engineer the tip of the diamond anvil for reduction in thermal conductivity (a) isotopic mixture of 12C and 13C in the diamond layer, (b) doping of diamond with impurities (nitrogen and/or boron), and (c) growing diamond in a higher concentration of methane in hydrogen plasma. Under this academic alliance with Lawrence Livermore National Laboratory (LLNL), PI and his graduate students will use the lithographic and diamond polishing facility at LLNL. This proposed next generation of designer diamond anvils will allow multi-tasking capability with the ability to measure electrical, magnetic, structural and thermal data on actinide materials with unparallel sensitivity in support of the stockpile stewardship program.

Yogesh K. Vohra

2005-05-12T23:59:59.000Z

309

ASSESSMENT OF THE DCLL TBM THERMOSTRUCTURAL RESPONSE BASED ON ITER DESIGN CRITERIA  

E-Print Network (OSTI)

= 300o C; STIP-I: Tirr = 90 o C to 375 o C HFIR/Tavassoli: IEA Heat 9741, 9753; STIP-I: IEA Heat 974 Program (STIP-I). To correlate effects of neutron damage on the UTS of F82H, we developed an equation, Z.F. TONG, of ferritic/martensitic steels irradiated in STIP- J. Nucl. Mater. 377 (2008) 115 121 13

Ghoniem, Nasr M.

310

Environmental Guidance Program Reference Book: Comprehensive Environmentally Response, Compensation, and Liability Act  

SciTech Connect

This Reference Book contains a current copy of the Comprehensive Environmental Response Compensation, and Liability Act and those regulations that implement the statute and appear to be most relevant to Department of Energy (DOE) activities. The document is provided to DOE and contractor staff for informational purposes only and should not be interpreted as legal guidance. Updates that include important new requirements will be provided periodically. Questions concerning this Reference Book may be directed to Mark Petts, EH-231 (FTS 896-2609 or Commercial 202/586-2609).

Not Available

1991-12-31T23:59:59.000Z

311

Designing PV Incentive Programs to Promote Performance: A Review of Current Practice in the U.S.  

E-Print Network (OSTI)

20] Celentano R. SDF Solar PV Grant Program in Southeasternin this paper, SDF’s Solar PV Grant Program has severalSolar Rewards Program Solar PV Rebate Program (Small PV

Barbose, Galen; Wiser, Ryan; Bolinger, Mark

2008-01-01T23:59:59.000Z

312

Design and development of Stirling engines for stationary power generation applications in the 500 to 3000 horsepower range. Volume 2. Program plan  

SciTech Connect

A plan for implementing the proposed state-of-the-art design described in Volume I has been developed. The main objective of the project is to demonstrate a large coal-fired Stirling engine and thus shorten the lead time to commercialization. The demonstration engine will be based on the concepts developed in the first phase of this program, as detailed in Volume I of this report. Thus the proposed program plan is based on the U-4 engine concept fired by a fluidized bed combustor with a two-stage gravity-assisted heat pipe. The plan is divided into five phases and an ongoing supporting technology program. Phase I, Conceptual Design, has been completed. The remaining phases are: Preliminary Design; Final Design; Fabrication; and Testing and Demonstration. The primary target is to begin testing the large coal-fired engine by the fifth year (1985) after the start of Preliminary Design.

Not Available,

1980-09-15T23:59:59.000Z

313

On The Design Of Environmentally Benign Refrigerant Mixtures: A Mathematical Programming Approach  

E-Print Network (OSTI)

Chlorofluorocarbon (CFC) based refrigerants (such as CFC12) have found widespread uses in home refrigerators and automotive air conditioners primarily due to their nontoxic, nonflammable nature and their high overall thermodynamic efficiency. However, CFC and hydrofluorocarbon (HCFC) refrigerants with intermediate to high ozone depletion potentials (ODP's) will be banned during the next two decades. The outcome of replacing CFC's in the vapor recompression cycle and various other processes is vital to several industries. Feasible solutions appear to include mixtures of hydrofluorocarbons (HFC's) which have the potential for matching thermodynamic properties of current working fluids while meeting several criteria for ozone depletion potential, flammability, toxicity, materials compatibility and cost. In this paper, a proof of concept study is made to show that mathematical programming can effectively be used to identify a small set of alternative refrigerant mixtures which can then be...

Amit Duvedi; Luke E.K. Achenie; Copyright Luke Achenie

1997-01-01T23:59:59.000Z

314

Weather-clustering based strategy design for dynamic demand response building HVAC control  

Science Conference Proceedings (OSTI)

Energy consumption and room temperature can be simulated using EnergyPlus model, given the building model, weather information, and HVAC control strategy. For a given weather forecast, however, online simulation-based optimization of the HVAC control ... Keywords: EnergyPlus, building HVAC control strategy, clustering, dynamic demand response

Rui Liao; Geng Li; Shun Miao; Yan Lu; Jianmin Zhu; Ling Shen

2012-11-01T23:59:59.000Z

315

Solar Pilot Plant, Phase I. Preliminary design report. Volume II, Book 3. Dynamic simulation model and computer program descriptions. CDRL item 2. [SPP dynamics simulation program  

DOE Green Energy (OSTI)

The mathematical models and computer program comprising the SPP Dynamic Simulation are described. The SPP Dynamic Simulation is a computerized model representing the time-varying performance characteristics of the SPP. The model incorporates all the principal components of the pilot plant. Time-dependent direct normal solar insulation, as corrupted by simulated cloud passages, is transformed into absorbed radiant power by actions of the heliostat field and enclosed receiver cavity. The absorbed power then drives the steam generator model to produce superheated steam for the turbine and/or thermal storage subsystems. The thermal storage subsystem can, in turn, also produce steam for the turbine. The turbine using the steam flow energy produces the mechanical shaft power necessary for the generator to convert it to electrical power. This electrical power is subsequently transmitted to a transmission grid system. Exhaust steam from the turbine is condensed, reheated, deaerated, and pressurized by pumps for return as feedwater to the thermal storage and/or steam generator. A master control/instrumentation system is utilized to coordinate the various plant operations. The master controller reacts to plant operator demands and control settings to effect the desired output response. The SPP Dynamic Simulation Computer program is written in FORTRAN language. Various input options (e.g., insolation values, load demands, initial pressures/temperatures/flows) are permitted. Plant performance may be monitored via computer printout or computer generated plots. The remainder of this document describes the detailed pilot plant dynamic model, the basis for this simulation, and the utilization of this simulation to obtain analytical plant performance results.

None

1977-05-01T23:59:59.000Z

316

Substation grounding programs  

SciTech Connect

This document is a users manual and applications guide for the software package SGA. This package comprises four computer programs, namely SOMIP, SMECC, SGSYS, and TGRND. The first three programs are analysis models which are to be used in the design process of substation grounding systems. The fourth program, TGRND, is an analysis program for determining the transient response of a grounding system. This report, Volume 3, is a users manual and an installation and validation manual for the computer program SGSYS (Substation Grounding SYStem Analysis Program). This program analyzes the substation ground field given the total electric current injected into the ground field and the design of the grounding system. Standard outputs of the program are (1) total ground resistance, (2) step voltage, (3) touch voltage, (4) voltages on a grid of points, (5) voltage profile along straight lines, (6) transfer voltages, (7) ground potential rise, (8) body currents, (9) step voltage profile along straight lines, and (10) touch voltage profile along straight lines. This program can be utilized in an interactive or batch mode. In the interactive mode, the user defines the grounding system geometry, soil parameters, and output requests interactively, with the use of a user friendly conversational program. The users manual describes data requirements and data preparation procedures. An appendix provides forms which facilitate data collection procedures. The installation and validation manual describes the computer files which make up the program SGSYS and provides a test case for validation purposes.

Meliopoulos, A.P.S. (Georgia Inst. of Tech., Atlanta, GA (United States). Electric Power Lab.)

1992-05-01T23:59:59.000Z

317

Debate response: Which rate designs provide revenue stability and efficient price signals? Let the debate continue.  

SciTech Connect

Let's engage in further discussion that provides solutions and details, not just criticisms and assertions. Let's engage in a meaningful dialogue about the conditions where real-time pricing or critical peak pricing with decoupling or the SFV rate design with a feebate is most effective. (author)

Boonin, David Magnus

2009-11-15T23:59:59.000Z

318

Early Site Permit Demonstration Program: Guidelines for determining design basis ground motions. Volume 1  

SciTech Connect

This report develops and applies a methodology for estimating strong earthquake ground motion. The motivation was to develop a much needed tool for use in developing the seismic requirements for structural designs. An earthquake`s ground motion is a function of the earthquake`s magnitude, and the physical properties of the earth through which the seismic waves travel from the earthquake fault to the site of interest. The emphasis of this study is on ground motion estimation in Eastern North America (east of the Rocky Mountains), with particular emphasis on the Eastern United States and southeastern Canada. Eastern North America is a stable continental region, having sparse earthquake activity with rare occurrences of large earthquakes. While large earthquakes are of interest for assessing seismic hazard, little data exists from the region to empirically quantify their effects. Therefore, empirically based approaches that are used for other regions, such as Western North America, are not appropriate for Eastern North America. Moreover, recent advances in science and technology have now made it possible to combine theoretical and empirical methods to develop new procedures and models for estimating ground motion. The focus of the report is on the attributes of ground motion in Eastern North America that are of interest for the design of facilities such as nuclear power plants. Specifically considered are magnitudes M from 5 to 8, distances from 0 to 500 km, and frequencies from 1 to 35 Hz.

Not Available

1993-03-18T23:59:59.000Z

319

COMPUTATION OF UNDERGROUND STRUCTURAL RESPONSE. Final Report of a Research Program  

SciTech Connect

Means of obtaining a better understanding of the phenomenological aspects of wave propagation in solid media were sought. Such information is of immediate importance in the study of earth motions resulting from blast loadings and in the design of underground structures to resist blast pressures. The research work was carried out in three separate study areas as follows: (1) A theoretical study of wave propagation in continuous solid media, involving rigorous mathematical formulations of wave motions and shock phenomena in solids. (2) Development of mathematically consistent discrete models of solid continua for the high-speed numerical computation of wave motions in solid media and for evaluating structure-soil interactions. (3) Studies of structure-soil interactions by simple analytical and experimental models. Only the effect of arching was considered. (auth)

Ang, A.; Newmark, N.M. eds.

1963-06-01T23:59:59.000Z

320

Option Value of Electricity Demand Response  

E-Print Network (OSTI)

Oakland CA, December. PJM Demand Side Response WorkingPrice Response Program a PJM Economic Load Response ProgramLoad Response Statistics PJM Demand Response Working Group

Sezgen, Osman; Goldman, Charles; Krishnarao, P.

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Advanced Turbine Systems program conceptual design and product development. Quarterly report, February--April 1994  

DOE Green Energy (OSTI)

Task 8.5 (active clearance control) was replaced with a test of the 2600F prototype turbine (Task 8.1T). Test 8.1B (Build/Teardown of prototype turbine) was added. Tasks 4 (conversion of gas-fired turbine to coal-fired turbine) and 5 (market study) were kicked off in February. Task 6 (conceptual design) was also initiated. Task 8.1 (advanced cooling technology) now has an approved test plan. Task 8.4 (ultra low NOx combustion technology) has completed the code development and background gathering phase. Task 8.6 (two-phase cooling of turbine vanes) is proceeding well; initial estimates indicate that nearly 2/3 of required cooling flow can be eliminated.

NONE

1995-02-01T23:59:59.000Z

322

Conceptual design for remote handling methods using the HIP process in the Calcine Immobilization Program  

SciTech Connect

This report recommends the remote conceptual design philosophy for calcine immobilization using the hot isostatic press (HIP) process. Areas of remote handling operations discussed in this report include: (1) introducing the process can into the front end of the HIP process, (2) filling and compacting the calcine/frit mixture into the process can, (3) evacuating and sealing the process can, (4) non-destructive testing of the seal on the process can, (5) decontamination of the process can, (6) HIP furnace loading and unloading the process can for the HIPing operation, (7) loading an overpack canister with processed HIP cans, (8) sealing the canister, with associated non-destructive examination (NDE) and decontamination, and (9) handling canisters for interim storage at the Idaho Chemical Processing Plant (ICPP) located on the Idaho National Engineering Laboratory (INEL) site.

Berry, S.M.; Cox, C.G.; Hoover, M.A.

1994-03-01T23:59:59.000Z

323

PNNL EERE Program: Building Technologies Program (Overview)  

NLE Websites -- All DOE Office Websites (Extended Search)

Laboratory, Energy Efficiency and Renewable Energy Program Laboratory, Energy Efficiency and Renewable Energy Program Home Program Areas Contacts Related Sites Energy Directorate PNNL Home Security & Privacy PNNL Buildings Program Overview PNNL Buildings Portfolio Science Foundation EE & Demand Response High-Performance Sustainable Design Codes and Standards Overcoming Market Barriers Analysis and Planning Key Buildings Projects Contacts Publications & Presentations PNNL Buildings Program Buildings account for about 40 percent of our nation's energy use. That's 72 percent of U.S. electricity and 55 percent of natural gas, resulting in 39 percent of U.S. carbon dioxide emissions and a range of other negative environmental impacts. The buildings sciences team at Pacific Northwest National Laboratory (PNNL) is committed to dramatically improving the

324

Advanced turbine systems program conceptual design and product development. Task 3 -- System selection; Topical report  

Science Conference Proceedings (OSTI)

Solar Turbines Incorporated has elected to pursue an intercooled and recuperated (ICR) gas turbine system to exceed the goals of the DOE Advanced Turbine Systems (ATS) program, which are to develop and commercialize an industrial gas turbine system that operates at thermal efficiencies at least 15% higher than 1991 products, and with emissions not exceeding eight ppmv NOx and 20 ppmv CO and UHC. Solar`s goal is to develop a commercially viable industrial system (3--20 MW) driven by a gas turbine engine with a thermal efficiency of 50% (ATS50), with the flexibility to meet the differing operational requirements of various markets. Dispersed power generation is currently considered to be the primary future target market for the ICR in the 5--15 MW size class. The ICR integrated system approach provides an ideal candidate for the assumed dispersed power market, with its small footprint, easy transportability, and environmental friendliness. In comparison with other systems that use water or toxic chemicals such as ammonia for NOx control, the ICR has no consumables other than fuel and air. The low pressure ratio of the gas turbine engine also is favorable in that less parasitic power is needed to pump the natural gas into the combustor than for simple-cycle machines. Solar has narrowed the ICR configuration to two basic approaches, a 1-spool, and a 2-spool version of the ATS50. The 1-spool engine will have a lower first-cost but lower part-power efficiencies. The 2-spool ATS may not only have better part-power efficiency, its efficiency will also be less sensitive to reduced turbine rotor inlet temperature levels. Thus hot-end parts life can be increased with only small sacrifices in efficiency. The flexibility of the 2-spool arrangement in meeting customer needs is its major advantage over the 1-spool. This Task 3 Topical Report is intended to present Solar`s preliminary system selection based upon the initial trade-off studies performed to date.

White, D.J.

1994-07-01T23:59:59.000Z

325

Advanced turbine systems (ATS) program conceptual design and product development. Quarterly report, September 1 - November 30, 1994  

DOE Green Energy (OSTI)

Achieving the advanced turbine system goals of 60% efficiency, 8 ppmvd NOx, and 10% electric power cost reduction imposes competing characteristics on the gas turbine system: the turbine inlet temperature must increase, although this will lead to increased NOx emission. Improved coating and materials along with creative combustor design can result in solutions. The program is focused on two specific products: a 70 MW class industrial gas turbine based on GE90 core technology utilizing an innovative air cooling methodology, and a 200 MW class utility gas turbine based on an advanced GE heavy duty machines utilizing advanced cooling and enhancement in component efficiency. This report reports on tasks 3-8 for the industrial ATS and the utility ATS. Some impingement heat transfer results are given.

NONE

1994-12-31T23:59:59.000Z

326

The Atmospheric Radiation Measurement (ARM) Program: Programmatic Background and Design of the Cloud and Radiation Test Bed  

Science Conference Proceedings (OSTI)

The Atmospheric Radiation Measurement (ARM) Program, supported by the U.S. Department of Energy, is a major new program of atmospheric measurement and modeling. The program is intended to improve the understanding of processes that affect ...

Gerald M. Stokes; Stephen E. Schwartz

1994-07-01T23:59:59.000Z

327

Army Solid State Laser Program: Design, Operation, and Mission Analysis for a Heat-Capacity Laser  

DOE Green Energy (OSTI)

Solid-state lasers have held great promise for the generation of high-average-power, high-quality output beams for a number of decades. However, the inherent difficulty of scaling the active solid-state gain media while continuing to provide efficient cooling has limited demonstrated powers to <5kW. Even at the maximum demonstrated average powers, the output is most often delivered as continuous wave (CW) or as small energy pulses at high pulse repetition frequency (PRF) and the beam divergence is typically >10X the diffraction limit. Challenges posed by optical distortions and depolarization arising from internal temperature gradients in the gain medium of a continuously cooled system are only increased for laser designs that would attempt to deliver the high average power in the form of high energy pulses (>25J) from a single coherent optical aperture. Although demonstrated phase-locking of multiple laser apertures may hold significant promise for the future scaling of solid-state laser systems,1 the continuing need for additional technical development and innovation coupled with the anticipated complexity of these systems effectively limits this approach for near-term multi-kW laser operation outside of a laboratory setting. We have developed and demonstrated a new operational mode for solid-state laser systems in which the cooling of the gain medium is separated in time from the lasing cycle. In ''heat-capacity'' operation, no cooling takes place during lasing. The gain medium is pumped very uniformly and the waste heat from the excitation process is stored in the solid-state gain medium. By depositing the heat on time scales that are short compared to thermal diffusion across the optical aperture, very high average power operation is possible while maintaining low optical distortions. After a lasing cycle, aggressive cooling can then take place in the absence of lasing, limited only by the fracture limit of the solid-state medium. This mode of operation is ideally suited for applications that require 1-30s engagements at very high average power. If necessary, multiple laser apertures can provide continuous operation. Land Combat mission analysis of a stressing air defense scenario including a dense attack of rockets, mortars, and artillery has indicated that multiple HEL weapon systems, based on the solid state, heat capacity laser concept, can provide significantly improved protection of high value battlefield assets. We will present EADSIM results for two government-supplied scenarios, one with temporally high threat density over a fairly large defended area, and one with fewer threats concentrating on a single defended asset. Implications for weapon system requirements will be presented. In order to demonstrate the operation of a high average power heat-capacity laser system, we have developed a flashlamp-pumped Nd:glass laser with output energies in the range of 500-1000J/pulse in a 10 x 10cm{sup 2} beam. With a repetition frequency of 20Hz, an average power of 13kW has been demonstrated for operational periods of up to 10s using a stable optical resonator (see enclosed figure). Using an M=1.4 unstable resonator, a beam divergence of 5X diffraction-limited has been measured with no active wavefront correction. An adaptively corrected unstable resonator that incorporates an intracavity deformable mirror controlled by feedback from an external wavefront sensor will provide <2X diffraction-limited output integrated over an entire 10s run at an average power of 10kW. A very similar laser architecture in which the Nd:glass is replaced by Nd:GGG and the flashlamps are replaced by large diode-laser arrays will enable the scaling of the output average power from the demonstrated 10kW to 100kW (500J/pulse at 200Hz). Risk reduction experiments for diode-pumped Nd:GGG, the fabrication of large Nd:GGG amplifier slabs, as well as the progress toward a sub-scale amplifier testbed pumped by diode arrays with total of 1MW peak power will also be presented.

Dane, C B; Flath, L; Rotter, M; Fochs, S; Brase, J; Bretney, K

2001-05-18T23:59:59.000Z

328

Coordination of Energy Efficiency and Demand Response  

E-Print Network (OSTI)

energy efficiency and demand response programs and tariffs.energy efficiency and demand response program and tariffenergy efficiency and demand response programs and tariffs.

Goldman, Charles

2010-01-01T23:59:59.000Z

329

Comments and responses on the Remedial Action Plan and site design for stabilization of the Inactive Uranium Mill Tailings Site, Grand Junction, Colorado. Revision 1  

SciTech Connect

This report contains information concerning public comments and responses on the remedial action plan and site design for stabilization of the inactive uranium mill tailings site in Grand Junction, Colorado.

NONE

1994-01-01T23:59:59.000Z

330

Designing Soybeans for the 21st Century MarketsChapter 13 Development of Tools to Study Immune-Mediated Allergenic Responses to Food and Feed  

Science Conference Proceedings (OSTI)

Designing Soybeans for the 21st Century Markets Chapter 13 Development of Tools to Study Immune-Mediated Allergenic Responses to Food and Feed Biofuels and Bioproducts and Biodiesel Food Science Health Nutrition Biochemistry Processing

331

The Impact of the Transient Response of 0rg;anic Light Emitting Diodes on the Design of Active Matrix OLED Displays  

E-Print Network (OSTI)

The Impact of the Transient Response of 0rg;anic Light Emitting Diodes on the Design of Active, Princeton, NJ, U.S.A. Abstract Much of the organic light emitting diode (OLED) characterization published

332

Review of current Southern California edison load management programs and proposal for a new market-driven, mass-market, demand-response program  

E-Print Network (OSTI)

of the Southern California Edison company. Table of Contentsfor Southern California Edison. LBNL-52408. Appendix A.Current Southern California Edison Load Management Programs

Weller, G.H.

2002-01-01T23:59:59.000Z

333

Plant Engineering: Guideline for the Acceptance of Commercial-Grade Design and Analysis Computer Programs Used in Nuclear Safety-Rel ated Applications  

Science Conference Proceedings (OSTI)

This report provides methodology that can be used to perform safety classification of non-process computer programs, such as design and analysis tools, that are not resident or embedded (installed as part of) plant systems, structures, and components. The report also provides guidance for using commercial-grade dedication methodology to accept commercially procured computer programs that perform a safety-related function. The guidance is intended for use by subject matter experts in the acceptance of com...

2012-06-04T23:59:59.000Z

334

Plant Engineering: Guideline for the Acceptance of Commercial-Grade Design and Analysis Computer Programs Used in Nuclear Safety-Related Applications: Revision 1 of 1025243  

Science Conference Proceedings (OSTI)

This report supersedes EPRI 1025243 and provides methodology that can be used to perform safety classification of non-process computer programs, such as design and analysis tools, that are not resident or embedded (installed as part of) plant systems, structures, and components. The report also provides guidance for using commercial-grade dedication methodology to accept commercially procured computer programs that perform a safety-related function. The guidance is intended for use by subject matter ...

2013-12-19T23:59:59.000Z

335

Visualization of Atomization Gas Flow and Melt Break-up Effects in Response to Nozzle Design  

SciTech Connect

Both powder particle size control and efficient use of gas flow energy are highly prized goals for gas atomization of metal and alloy powder to minimize off-size powder inventory (or 'reverb') and excessive gas consumption. Recent progress in the design of close-coupled gas atomization nozzles and the water model simulation of melt feed tubes were coupled with previous results from several types of gas flow characterization methods, e.g., aspiration measurements and gas flow visualization, to make progress toward these goals. Size distribution analysis and high speed video recordings of gas atomization reaction synthesis (GARS) experiments on special ferritic stainless steel alloy powders with an Ar+O{sub 2} gas mixture were performed to investigate the operating mechanisms and possible advantages of several melt flow tube modifications with one specific gas atomization nozzle. In this study, close-coupled gas atomization under closed wake gas flow conditions was demonstrated to produce large yields of ultrafine (dia.<20 {mu}m) powders (up to 32%) with moderate standard deviations (1.62 to 1.99). The increased yield of fine powders is consistent with the dual atomization mechanisms of closed wake gas flow patterns in the near-field of the melt orifice. Enhanced size control by stabilized pre-filming of the melt with a slotted trumpet bell pour tube was not clearly demonstrated in the current experiments, perhaps confounded by the influence of the melt oxidation reaction that occurred simultaneously with the atomization process. For this GARS variation of close-coupled gas atomization, it may be best to utilize the straight cylindrical pour tube and closed wake operation of an atomization nozzle with higher gas mass flow to promote the maximum yields of ultrafine powders that are preferred for the oxide dispersion strengthened alloys made from these powders.

Anderson, Iver; Rieken, Joel; Meyer, John; Byrd, David; Heidloff, Andy

2011-04-01T23:59:59.000Z

336

Substation grounding programs  

SciTech Connect

This document is a users manual and applications guide for the software package SGA. This package comprises four computer programs, namely SOMIP, SMECC, SGSYS, and TGRND. The first three programs are analysis models which are to be used in the design process of substation grounding systems. The fourth program, TGRND, is an analysis program for determining the transient response of a grounding system. This report, Volume 2, is a users manual and an installation and validation manual for the computer program SMECC (Substation Maximum Earth Current Computation Program). This program analyzes the electric current distribution among grounded structures inside and outside a substation for different fault conditions. The fault conditions are automatically selected by the program, or they may be specified by the user, or both. The fault condition resulting in maximum substation earth current is identified and reported. Data requirements for this program are: ground impedance, transformer data, transmission line data, transmission line grounding impedances, etc. The program provides four types of standard outputs: (1) a report of voltages and current flow in the unfaulted system, (2) a brief report of the maximum ground potential rise (worst fault condition), (3) a summary report of all fault conditions which have been analyzed by the program, and (4) a detailed report of voltages and current flow for a selected set of fault conditions.

Meliopoulos, A.P.S. (Georgia Inst. of Tech., Atlanta, GA (United States). Electric Power Lab.)

1992-05-01T23:59:59.000Z

337

Advanced Turbine Design Program  

SciTech Connect

The prime objective of this project task is to select a natural gas fired as Advanced Turbine Systems (ATS) capable of reaching 60% cycle efficiency. Several cycles were compared and evaluated under all different kind of aspects, to determine the one with the highest potential and, at the same time, the best overall fit within and experience base to guarantee project goals. The combined cycle with multistep development potential was identified as the system to reach the 60% or greater thermal efficiency.

van der Linden, S.; Gnaedig, G.; Kreitmeier, F.

1992-01-01T23:59:59.000Z

338

Advanced Turbine Design Program  

SciTech Connect

The prime objective of this project task is to select a natural gas fired as Advanced Turbine Systems (ATS) capable of reaching 60% cycle efficiency. Several cycles were compared and evaluated under all different kind of aspects, to determine the one with the highest potential and, at the same time, the best overall fit within and experience base to guarantee project goals. The combined cycle with multistep development potential was identified as the system to reach the 60% or greater thermal efficiency.

van der Linden, S.; Gnaedig, G.; Kreitmeier, F.

1992-12-31T23:59:59.000Z

339

Advanced turbine systems program conceptual design and product development task 5 -- market study of the gas fired ATS. Topical report  

DOE Green Energy (OSTI)

Solar Turbines Incorporated (Solar), in partnership with the Department of Energy, will develop a family of advanced gas turbine-based power systems (ATS) for widespread commercialization within the domestic and international industrial marketplace, and to the rapidly changing electric power generation industry. The objective of the jointly-funded Program is to introduce an ATS with high efficiency, and markedly reduced emissions levels, in high numbers as rapidly as possible following introduction. This Topical Report is submitted in response to the requirements outlined in Task 5 of the Department of Energy METC Contract on Advanced Combustion Systems, Contract No, DE AC21-93MC30246 (Contract), for a Market Study of the Gas Fired Advanced Turbine System. It presents a market study for the ATS proposed by Solar, and will examine both the economic and siting constraints of the ATS compared with competing systems in the various candidate markets. Also contained within this report is an examination and analysis of Solar`s ATS and its ability to compete in future utility and industrial markets, as well as factors affecting the marketability of the ATS.

NONE

1995-05-01T23:59:59.000Z

340

Designing PV Incentive Programs to Promote Performance: A Review of Current Practice in the U.S.  

E-Print Network (OSTI)

Four programs (TEP, UPS, Xcel, and RIREF) have adoptedUtility District (SMUD) Xcel Energy Connecticut Clean Energyb CA – LADWP CA – SMUD CO – Xcel CT – CCEF Small PV Program

Barbose, Galen; Wiser, Ryan; Bolinger, Mark

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Designing PV Incentive Programs to Promote Performance: A Review of Current Practice in the U.S.  

E-Print Network (OSTI)

Program Washington Renewable Energy Production Incentivesrenewable energy credits (RECs) via energy production-basedRenewable DG Program ($0.01/kWh for the first year of energy production)

Barbose, Galen; Wiser, Ryan; Bolinger, Mark

2008-01-01T23:59:59.000Z

342

Real-time pricing program in a smart grid environment  

Science Conference Proceedings (OSTI)

Improving system efficiency and reliability is motivating countries to design and execute different types of time of use demand response programs. However, certain deficiencies prevent these programs from reaching their goals. Smart meters as a mechanism ... Keywords: real-time pricing, smart grid, time of use programs

Hassan Monsef, Bin Wu

2013-04-01T23:59:59.000Z

343

Program Plan for Renewable Energy generation of electricity. Response to Section 2111 of the Energy Policy Act of 1992  

SciTech Connect

A 5-Year Program Plan for providing cost-effective options for generating electricity from renewable energy sources is presented by the US Department of Energy Office of Energy Efficiency and Renewable Energy. The document covers the Utility-Sector situation, scope of the program, specific generating technologies, and implementation of the program plan.

1994-12-01T23:59:59.000Z

344

City of Palm Desert - Energy Independence Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Palm Desert - Energy Independence Program Palm Desert - Energy Independence Program City of Palm Desert - Energy Independence Program < Back Eligibility Agricultural Commercial Industrial Residential Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Home Weatherization Sealing Your Home Design & Remodeling Windows, Doors, & Skylights Solar Buying & Making Electricity Heating Water Heating Program Info State California Program Type PACE Financing Provider Palm Desert '''''Note: The Federal Housing Financing Agency (FHFA) issued a statement in July 2010 concerning the senior lien status associated with most PACE programs. In response to the FHFA statement, most local PACE programs have been suspended until further clarification is provided. After temporarily suspending their program, Palm Desert reinstated it in August 2010, but

345

Environmental Monitoring Program Quality Assurance Project Plan  

SciTech Connect

The Quality Assurance Project Plan (QAPP) is intended to document the quality assurance of the Environmental Monitoring Program. The Quality Assurance Project Plan has two parts and is written to become a chapter in the Environmental Monitoring Plan. Part A describes the management responsibilities and activities performed to assure the quality of the Environmental Monitoring Program. Part B covers the documentation requirements for changes in the Monitoring Program, and provides details on control of the design and implementation of quality assurance activities.

Holland, R.C.

1993-06-01T23:59:59.000Z

346

New Production Reactors Program Plan  

SciTech Connect

Part I of this New Production Reactors (NPR) Program Plan: describes the policy basis of the NPR Program; describes the mission and objectives of the NPR Program; identifies the requirements that must be met in order to achieve the mission and objectives; and describes and assesses the technology and siting options that were considered, the Program's preferred strategy, and its rationale. The implementation strategy for the New Production Reactors Program has three functions: Linking the design, construction, operation, and maintenance of facilities to policies requirements, and the process for selecting options. The development of an implementation strategy ensures that activities and procedures are consistent with the rationale and analysis underlying the Program. Organization of the Program. The strategy establishes plans, organizational structure, procedures, a budget, and a schedule for carrying out the Program. By doing so, the strategy ensures the clear assignment of responsibility and accountability. Management and monitoring of the Program. Finally, the strategy provides a basis for monitoring the Program so that technological, cost, and scheduling issues can be addressed when they arise as the Program proceeds. Like the rest of the Program Plan, the Implementation Strategy is a living document and will be periodically revised to reflect both progress made in the Program and adjustments in plans and policies as they are made. 21 figs., 5 tabs.

1990-12-01T23:59:59.000Z

347

Synthetic Design of New Metal-Organic Framework Materials for Hydrogen Storage - DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report  

NLE Websites -- All DOE Office Websites (Extended Search)

9 9 FY 2012 Annual Progress Report DOE Hydrogen and Fuel Cells Program Pingyun Feng (Primary Contact), Qipu Lin, Xiang Zhao Department of Chemistry University of California Riverside, CA 92521 Phone: (951) 827-2042 Email: pingyun.feng@ucr.edu DOE Program Officer: Dr. Michael Sennett Phone: (301) 903-6051 Email: Michael.Sennett@science.doe.gov Objectives Design and * synthesize new metal-organic framework materials using lightweight chemical elements to help improve gravimetric hydrogen storage capacity. Develop new synthetic strategies to generate novel * active binding sites on metal ions and ligands to enhance solid-gas interactions for increased uptake near ambient conditions.

348

Substation grounding programs  

SciTech Connect

This document is a users manual and applications guide for the software package SGA. This package comprises four computer programs, namely SOMIP, SMECC, SGSYS, and TGRND. The first three programs are analysis models which are to be used in the design process of substation grounding systems. The fourth program, TGRND, is an analysis program for determining the transient response of a grounding system. This report, Volume 5, is an applications guide of the three computer programs. SOMIP, SMECC, and SGSYS, for the purpose of designing a safe substation grounding system. The applications guide utilizes four example substation grounding systems for the purpose of illustrating the application of the programs, SOMIP, SMECC, and SGSYS. The examples are based on data provided by four contributing utilities, namely, Houston Lighting and Power Company, Southern Company Services, Puget Sound Power and Light Company, and Arizona Public Service Company. For the purpose of illustrating specific capabilities of the computer programs, the data have been modified. As a result, the final designs of the four systems do not necessarily represent actual grounding system designs by these utilities. The example system 1 is a 138 kV/35 kV distribution substation. The example system 2 is a medium size 230 kV/115 kV transmission substation. The third example system is a generation substation while the last is a large 525 kV/345 kV/230 kV transmission substation. The four examples cover most of the practical problems that a user may encounter in the design of substation grounding systems.

Meliopoulos, A.P.S. (Georgia Inst. of Tech., Atlanta, GA (United States). Electric Power Lab.)

1992-05-01T23:59:59.000Z

349

Advanced turbine systems program: Conceptual design and product development. Quarterly report, November 1, 1995--January 31, 1996  

DOE Green Energy (OSTI)

Several tasks were completed. Design and test of critical components are discussed. Plans for the next reporting period are outlined.

NONE

1996-04-09T23:59:59.000Z

350

MACK-IV, a new version of MACK: a program to calculate nuclear response functions from data in ENDF/B format  

DOE Green Energy (OSTI)

MACK-IV calculates nuclear response functions important to the neutronics analysis of nuclear and fusion systems. A central part of the code deals with the calculation of the nuclear response function for nuclear heating more commonly known as the kerma factor. Pointwise and multigroup neutron kerma factors, individual reactions, helium, hydrogen, and tritium production response functions are calculated from any basic nuclear data library in ENDF/B format. The program processes all reactions in the energy range of 0 to 20 MeV for fissionable and nonfissionable materials. The program also calculates the gamma production cross sections and the gamma production energy matrix. A built-in computational capability permits the code to calculate the cross sections in the resolved and unresolved resonance regions from resonance parameters in ENDF/B with an option for Doppler broadening. All energy pointwise and multigroup data calculated by the code can be punched, printed and/or written on tape files. Multigroup response functions (e.g., kerma factors, reaction cross sections, gas production, atomic displacements, etc.) can be outputted in the format of MACK-ACTIVITY-Table suitable for direct use with current neutron (and photon) transport codes.

Abdou, M.A.; Gohar, Y.; Wright, R.Q.

1978-07-01T23:59:59.000Z

351

SUA: A computer program to compute regolith site-response and estimate uncertainty for probabilistic seismic hazard analyses  

Science Conference Proceedings (OSTI)

The presence of soils, geological sediments and weathered rock (collectively known as regolith) can amplify the level of ground shaking experienced during an earthquake. Consequently, including the affect of regolith on earthquake ground shaking is an ... Keywords: Amplification factor, Equivalent linear site-response, Regolith, Response spectral acceleration, Uncertainty

David Robinson; Trevor Dhu; John Schneider

2006-02-01T23:59:59.000Z

352

A Proposed Framework for a Demand Response Product Database  

Science Conference Proceedings (OSTI)

Demand response is now widely recognized as an essential feature of well-functioning wholesale and retail electricity markets. Some utilities have had dynamic pricing plans (a form of demand response) underway for many years. All major wholesale electricity markets in the United States have demand response programs today. Despite this experience, it is difficult to learn from the programs that have been implemented due to a lack of a consistent framework for comparing their major design features (includi...

2008-12-22T23:59:59.000Z

353

Compressed air energy storage: preliminary design and site development program in an aquifer. Final draft, Task 1: establish facility design criteria and utility benefits  

SciTech Connect

Compressed air energy storage (CAES) has been identified as one of the principal new energy storage technologies worthy of further research and development. The CAES system stores mechanical energy in the form of compressed air during off-peak hours, using power supplied by a large, high-efficiency baseload power plant. At times of high electrical demand, the compressed air is drawn from storage and is heated in a combustor by the burning of fuel oil, after which the air is expanded in a turbine. In this manner, essentially all of the turbine output can be applied to the generation of electricity, unlike a conventional gas turbine which expends approximately two-thirds of the turbine shaft power in driving the air compressor. The separation of the compression and generation modes in the CAES system results in increased net generation and greater premium fuel economy. The use of CAES systems to meet the utilities' high electrical demand requirements is particularly attractive in view of the reduced availability of premium fuels such as oil and natural gas. This volume documents the Task 1 work performed in establishing facility design criteria for a CAES system with aquifer storage. Information is included on: determination of initial design bases; preliminary analysis of the CAES system; development of data for site-specific analysis of the CAES system; detailed analysis of the CAES system for three selected heat cycles; CAES power plant design; and an economic analysis of CAES.

1980-10-01T23:59:59.000Z

354

Argonne TDC: Emergency Response Technologies  

Emergency Response Technologies. PROTECT (Program for Response Options and Technology Enhancements for Chemical/Biological Terrorism) Grid Security ...

355

PSP Program close out documentation  

SciTech Connect

In December 1982 DOE-SR directed SRL to study the feasibility and impact of a program to lower the U-236 content of the Highly Enriched Uranium (HEU) stockpile used as fuel for the SRP reactors. In response to this request SRL assessed four technologies, Atomic Vapor Laser Isotope Separation (AVLIS), Molecular Laser Isotope Separation (MLIS), Gas Centrifuge, and the Plasma Separation Process (PSP) for this purpose with the assistance of the Engineering Department. In April 1983 cost/benefit analyses for these processes, high spot cost estimates for production facilities, and process uncertainties were submitted to DOE-SR with a recommendation to proceed with the conceptual design and supporting development programs for a facility based on the use of the PSP process. The current program status for the PSP development program at SRL and the design and documentation of a production facility at SRP, referred to as the Fuel Improvement Demonstration Facility (FIDF), is described in this report.

Andringa, K.; Hootman, H.E.; Ferrara, A.S.; Smith, P.K.; Congdon, J.W.; Randolph, H.W.; Young, R.H.; Driggers, F.E.; Topp, S.V.

1985-12-31T23:59:59.000Z

356

Advanced Turbine Systems Program conceptual design and product development. Task 3.0, Selection of natural gas-fired Advanced Turbine System  

DOE Green Energy (OSTI)

This report presents results of Task 3 of the Westinghouse ATS Phase II program. Objective of Task 3 was to analyze and evaluate different cycles for the natural gas-fired Advanced Turbine Systems in order to select one that would achieve all ATS program goals. About 50 cycles (5 main types) were evaluated on basis of plant efficiency, emissions, cost of electricity, reliability-availability-maintainability (RAM), and program schedule requirements. The advanced combined cycle was selected for the ATS plant; it will incorporate an advanced gas turbine engine as well as improvements in the bottoming cycle and generator. Cost and RAM analyses were carried out on 6 selected cycle configurations and compared to the baseline plant. Issues critical to the Advanced Combined Cycle are discussed; achievement of plant efficiency and cost of electricity goals will require higher firing temperatures and minimized cooling of hot end components, necessitating new aloys/materials/coatings. Studies will be required in combustion, aerodynamic design, cooling design, leakage control, etc.

NONE

1994-12-01T23:59:59.000Z

357

Near Term Hybrid Passenger Vehicle Development Program. Phase I, Final report. Appendix C: preliminary design data package. Volume I  

DOE Green Energy (OSTI)

The assumptions made, analysis methods used, and preliminary results of research to determine the design specifications for a hybrid electric-powered and internal combustion engine-powered vehicle that would optimize the fuel economy of passenger automobiles are described. Information is included on body and component design, selection of spark-ignition engine and Ni-Zn batteries, life-cycle costs and life-cycle fuel consumption. (LCL)

Piccolo, R.

1979-07-31T23:59:59.000Z

358

Program on Technology Innovation: Technical Support for GE Economic Simplified Boiling Water Reactor (ESBWR)-Radwaste System Design  

Science Conference Proceedings (OSTI)

EPRI has undertaken a review of advanced nuclear plant (ANP) radioactive waste system designs. This work updates EPRI's Utility Requirements Document (URD) for the design of Advanced Light Water Reactor plants. The goal is to capture the radwaste elements that have led to the dramatic improvement in radioactive waste processing in terms of technology advances and improved operating strategy seen in today's operating U.S. plants. This work will form the basis for radioactive waste processing systems in th...

2006-11-21T23:59:59.000Z

359

Advanced Turbine Systems Program: Conceptual Design and Product Development. Annual report, August 1, 1995--July 31, 1996; Advanced turbine systems program: Conceptual design and product development. Annual report, August 1, 1995--July 31, 1996  

Science Conference Proceedings (OSTI)

Objective of Phase II is to provide the coneptual design and product development plan for an ultra high efficiency, enivornmentally superior and cost competitive industrial gas turbine system to be commercialized by the year 2000. All 8 tasks have been completed (see quarterly reports, topical reports).

NONE

1996-12-31T23:59:59.000Z

360

Optimization Online - Optimal Design of Electrical Machines ...  

E-Print Network (OSTI)

Jun 8, 2011 ... Optimal Design of Electrical Machines: Mathematical Programming ... Science and Engineering (Multidisciplinary Design Optimization ).

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Hydrogen Emergency Response Training for First Responders - DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report  

NLE Websites -- All DOE Office Websites (Extended Search)

52 52 DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report Monte R. Elmore Pacific Northwest National Laboratory (PNNL) 902 Battelle Blvd. Richland, WA 99352 Phone: (509) 372-6158 Email: monte.elmore@pnnl.gov DOE Manager HQ: Antonio Ruiz Phone: (202) 586-0729 Email: Antonio.Ruiz@ee.doe.gov Subcontractors: * Jennifer Hamilton, California Fuel Cell Partnership (CaFCP), Sacramento, CA * Hanford Fire Department, Richland, WA * Hazardous Materials Management and Emergency

362

Design and Synthesis of Chemically and Electronically Tunable Nanoporous Organic Polymers for Use in Hydrogen Storage Applications - DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report  

NLE Websites -- All DOE Office Websites (Extended Search)

6 6 DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report Hani M. El-Kaderi (Primary Contact), Mohammad G. Rabbani, Thomas E. Reich, Karl T. Jackson, Refaie M. Kassab Virginia Commonwealth University Department of Chemistry 1001 West Main St Richmond, VA 23284-2006 Phone: (804) 828-7505 Email: helkaderi@vcu.edu DOE Program Officer: Michael Sennett Phone: (301) 903-6051 Email: Michael.Sennett@science.doe.go Objectives Design and synthesis of new classes of low density * nanoporous organic polymers that are linked by strong covalent bonds and composed of chemically and electronically tunable building blocks. Use gas sorption experiments to investigate porosity and * determine hydrogen storage at variable temperature and

363

SPACE-R Thermionic Space Nuclear Power System: Design and Technology Demonstration Program. Semiannual technical progress report for period ending March 1993  

Science Conference Proceedings (OSTI)

This Semiannual Technical Progress Report summarizes the technical progress and accomplishments for the Thermionic Space Nuclear Power System (TI-SNPS) Design and Technology Demonstration Program of the Prime Contractor, Space Power Incorporated (SPI), its subcontractors and supporting National Laboratories during the first half of the Government Fiscal Year (GFY) 1993. SPI`s subcontractors and supporting National Laboratories include: Babcock & Wilcox for the reactor core and externals; Space Systems/Loral for the spacecraft integration; Thermocore for the radiator heat pipes and the heat exchanger; INERTEK of CIS for the TFE, core elements and nuclear tests; Argonne National Laboratories for nuclear safety, physics and control verification; and Oak Ridge National laboratories for materials testing. Parametric trade studies are near completion. However, technical input from INERTEK has yet to be provided to determine some of the baseline design configurations. The INERTEK subcontract is expected to be initiated soon. The Point Design task has been initiated. The thermionic fuel element (TFE) is undergoing several design iterations. The reactor core vessel analysis and design has also been started.

Not Available

1993-05-01T23:59:59.000Z

364

Evaluation of a marketing program designed to increase consumer consideration of energy-efficient products in Denver, Colorado  

SciTech Connect

A demonstration marketing program to sensitize Denver homeowners to incorporate the energy cost of ownership orientation in their decision process regarding purchase of energy-efficient products is described. Personal interviews with Denver homeowners were conducted. A first survey established a baseline for consumer awareness and acceptance of energy conservation and conservation-related products and provided information which could be utilized in developing marketing strategies related to energy conservation and the concept of energy cost of ownership. A second survey measured shifts in awareness and attitudes which might have occurred as a result of the marketing demonstration program. The methodology and results of the evaluation are discussed in detail. The Denver Test Market Media Campaign conducted through multi-media advertising and public relations campaigns to sensitize the residents to the positive consideraton of energy-efficient products is described. (MCW)

1978-08-01T23:59:59.000Z

365

Key Institutional Design Considerations and Resources Required to Develop a Federal Greenhouse Gas Offsets Program in the United Sta tes  

Science Conference Proceedings (OSTI)

Greenhouse gas (GHG) emissions offsets have emerged as a critical element of evolving U.S. climate policy and a critical factor in determining the future price of CO2 emissions and the economic costs of proposed policies. This report evaluates the governmental institutional requirements and resources needed to develop a large-scale national domestic GHG emissions offset program. It also describes potential institutional barriers that might limit the ability of the evolving carbon market to generate signi...

2011-05-25T23:59:59.000Z

366

State Building Energy Efficiency Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

State Building Energy Efficiency Program State Building Energy Efficiency Program State Building Energy Efficiency Program < Back Eligibility State Government Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Program Info State Utah Program Type Energy Standards for Public Buildings Provider State of Utah Department of Administrative Services On March 17, 2006, [http://www.le.state.ut.us/~2006/bills/hbillenr/hb0080.pdf House Bill 80] was enacted in Utah, requiring the Division of Facilities Construction and Management to administer the State Building Energy Efficiency Program. The Division is responsible for developing guidelines, incentives and procedures for energy efficiency and reduction of costs in state

367

Descriptions of Past Research in Program 80: New Combustion Turbine/Combined-Cycle Plant Design and Technology Selection  

Science Conference Proceedings (OSTI)

BackgroundAt a time when the power industry needs to meet growing demand and capacity requirements, informed decisions on gas turbine selection and plant designs are especially important. Technology selection impacts efficiency, emissions, availability, maintainability, and durability. Flexible operational capabilities are needed for plant dispatch, and planners need to understand upcoming trends and potential improvements for future growth.The Electric Power ...

2012-09-19T23:59:59.000Z

368

Advanced turbine systems program conceptual design and product development: Task 8.1, Low-pressure drop recuperator  

DOE Green Energy (OSTI)

Purpose of the ATS program is to develop a new baseline for industrial gas turbine systems for the 21st century. A recuperated gas turbine cycle was selected; the eventual engine that result will utilize Solar`s Primary Surface Recuperator (PSR) technology. Besides higher thermal efficiency, other goals included lower emission, cost of power, and improved RAMD (reliability, availability, maintainability). Performance data have been obtained for the candidate heat transfer surface, and on a scaled rig. Pretest predictions of air-side and gas-side pressure drop were in very good agreement with tests results; predicted effectiveness also agreed well with experiment. A flattened tube test to determine changes of the PSR heat transfer surface profile after exposure is underway.

NONE

1995-09-01T23:59:59.000Z

369

INEL geothermal environmental program. 1980 annual report  

DOE Green Energy (OSTI)

An overview of continuing environmental research and monitoring programs conducted at the Raft River Geothermal Site is provided. The monitoring programs are designed to collect data on the physical, biological and human environments of the development area. Primary research during 1980 emphasized completing baseline studies on terrestrial fauna, establishing an air quality monitoring network, investigating potential sources of fluoride in the Raft River Valley, and studying water level changes in the shallow monitor wells in response to development of the geothermal resource.

Cahn, L.S.; Thurow, T.L.; Martinez, J.A.

1981-04-01T23:59:59.000Z

370

Program Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Description Program Description SAGE, the Summer of Applied Geophysical Experience, is a unique educational program designed to introduce students in geophysics and related fields to "hands on" geophysical exploration and research. The program emphasizes both teaching of field methods and research related to basic science and a variety of applied problems. SAGE is hosted by the National Security Education Center and the Earth and Environmental Sciences Division of the Los Alamos National Laboratory. * teaches modern geophysical exploration techniques: seismic reflection and refraction, gravity and magnetics, electromagnetics (including magnetotellurics), and electrical resistivity * involves extensive hands-on field experience * integrates geophysical methods to solve real

371

Advanced Turbine System (ATS) program conceptual design and product development. Quarterly report, March 1, 1994--May 31, 1994  

DOE Green Energy (OSTI)

GE has achieved a leadership position in the worldwide gas turbine industry in both industrial/utility markets and in aircraft engines. This design and manufacturing base plus their close contact with the users provides the technology for creation of the next generation advanced power generation systems for both the industrial and utility industries. GE has been active in the definition of advanced turbine systems for several years. These systems will leverage the technology from the latest developments in the entire GE gas turbine product line. These products will be USA based in engineering and manufacturing and are marketed through the GE Industrial and Power Systems. Achieving the advanced turbine system goals of 60% efficiency, 8 ppmvd NO{sub x} and 10% electric power cost reduction imposes competing characteristics on the gas turbine system. Two basic technical issues arise from this. The turbine inlet temperature of the gas turbine must increase to achieve both efficiency and cost goals. However, higher temperatures move in the direction of increased NO{sub x} emission. Improved coating and materials technologies along with creative combustor design can result in solutions to achieve the ultimate goal. GE`s view of the market, in conjunction with the industrial and utility objectives requires the development of Advanced Gas Turbine Systems which encompasses two potential products: a new aeroderivative combined cycle system for the industrial market and a combined cycle system for the utility sector that is based on an advanced frame machine.

NONE

1998-12-31T23:59:59.000Z

372

Advanced Turbine System (ATS) program conceptual design and product development. Quarterly report, September, 1--November 30, 1995  

SciTech Connect

GE has achieved a leadership position in the worldwide gas turbine industry in both industrial/utility markets and in aircraft engines. This design and manufacturing base plus our close contact with the users provides the technology for creation of the next generation advanced power generation systems for both the industrial and utility industries. GE has been active in the definition of advanced turbine systems for several years. These systems will leverage the technology from the latest developments in the entire GE gas turbine product line. These products will be USA-based in engineering and manufacturing and are marketed through GE Power Systems. Achieving the Advanced Turbine Systems (ATS) goals of 60% efficiency, single-digit NOx, and 10% electric power cost reduction imposes competing characteristics on the gas turbine system. Two basic technical issues arise from this. The turbine inlet temperature of the gas turbine must increase to achieve both the efficiency and cost goals. However, higher temperatures move in the direction of increased NOx emissions. Improved coatings and other materials technologies along with creative combustor design can result in solutions which will achieve the ultimate goal. GE`s view of the market, in conjunction with the industrial and utility objectives, requires the development of Advanced Gas Turbine Systems which encompass two potential products: a new aeroderivative combined-cycle system for the industrial market, and a combined-cycle system for the utility sector that is based on an advanced frame machine.

1997-06-01T23:59:59.000Z

373

Advanced Turbine Systems (ATS) program conceptual design and product development. Quarterly report, December 1, 1993--February 28, 1994  

SciTech Connect

GE has achieved a leadership position in the worldwide gas turbine industry in both industrial/utility markets and in aircraft engines. This design and manufacturing base plus our close contact with the users provides the technology for creation of the next generation advanced power generation systems for both the industrial and utility industries. GE has been active in the definition of advanced turbine systems for several years. These systems will leverage the technology from the latest developments in the entire GE gas turbine product line. These products will be USA based in engineering and manufacturing and are marketed through the GE Industrial and Power Systems. Achieving the advanced turbine system goals of 60% efficiency, 8 ppmvd NOx and 10% electric power cost reduction imposes competing characteristics on the gas turbine system. Two basic technical issues arise from this. The turbine inlet temperature of the gas turbine must increase to achieve both efficiency and cost goals. However, higher temperatures move in the direction of increased NOx emission. Improved coating and materials technologies along with creative combustor design can result in solutions to achieve the ultimate goal.

1997-06-01T23:59:59.000Z

374

Advanced Turbine Systems (ATS) program conceptual design and product development. Quarterly report, August 25--November 30, 1993  

SciTech Connect

GE has achieved a leadership position in the worldwide gas turbine industry in both industrial/utility markets and in aircraft engines. This design and manufacturing base plus our close contact with the users provides the technology for creation of the next generation advanced power generation systems for both the industrial and utility industries. GE has been active in the definition of advanced turbine systems for several years. These systems will leverage the technology from the latest developments in the entire GE gas turbine product line. These products will be USA based in engineering and manufacturing and are marketed through the GE Industrial and Power Systems. Achieving the advanced turbine system goals of 60% efficiency, 8 ppmvd NOx and 10% electric power cost reduction imposes competing characteristics on the gas turbine system. Two basic technical issues arise from this. The turbine inlet temperature of the gas turbine must increase to achieve both efficiency and cost goals. However, higher temperatures move in the direction of increased NOx emission. Improved coating and materials technologies along with creative combustor design can result in solutions to achieve the ultimate goal.

1997-06-01T23:59:59.000Z

375

Advanced turbine systems program conceptual design and product development Task 8.3 - autothermal fuel reformer (ATR). Topical report  

DOE Green Energy (OSTI)

Autothermal fuel reforming (ATR) consists of reacting a hydrocarbon fuel such as natural gas or diesel with steam to produce a hydrogen-rich {open_quotes}reformed{close_quotes} fuel. This work has been designed to investigate the fuel reformation and the product gas combustion under gas turbine conditions. The hydrogen-rich gas has a high flammability with a wide range of combustion stability. Being lighter and more reactive than methane, the hydrogen-rich gas mixes readily with air and can be burned at low fuel/air ratios producing inherently low emissions. The reformed fuel also has a low ignition temperature which makes low temperature catalytic combustion possible. ATR can be designed for use with a variety of alternative fuels including heavy crudes, biomass and coal-derived fuels. When the steam required for fuel reforming is raised by using energy from the gas turbine exhaust, cycle efficiency is improved because of the steam and fuel chemically recuperating. Reformation of natural gas or diesel fuels to a homogeneous hydrogen-rich fuel has been demonstrated. Performance tests on screening various reforming catalysts and operating conditions were conducted on a batch-tube reactor. Producing over 70 percent of hydrogen (on a dry basis) in the product stream was obtained using natural gas as a feedstock. Hydrogen concentration is seen to increase with temperature but less rapidly above 1300{degrees}F. The percent reforming increases as the steam to carbon ratio is increased. Two basic groups of reforming catalysts, nickel - and platinum-basis, have been tested for the reforming activity.

NONE

1996-11-01T23:59:59.000Z

376

New wholesale power market design using linked forward markets : a study for the DOE energy storage systems program.  

Science Conference Proceedings (OSTI)

This report proposes a reformulation of U.S. ISO/RTO-managed wholesale electric power mar- kets for improved reliability and e ciency of system operations. Current markets do not specify or compensate primary frequency response. They also unnecessarily limit the participation of new technologies in reserve markets and o er insu cient economic inducements for new capacity invest- ment. In the proposed market reformulation, energy products are represented as physically-covered rm contracts and reserve products as physically-covered call option contracts. Trading of these products is supported by a backbone of linked ISO/RTO-managed forward markets with planning horizons ranging from multiple years to minutes ahead. A principal advantage of this reformulation is that reserve needs can be speci ed in detail, and resources can o er the services for which they are best suited, without being forced to conform to rigid reserve product de nitions. This should improve the business case for electric energy storage and other emerging technologies to provide reserve. In addition, the facilitation of price discovery should help to ensure e cient energy/reserve procurement and adequate levels of new capacity investment.

Silva Monroy, Cesar Augusto; Loose, Verne William; Ellison, James F.; Elliott, Ryan Thomas; Byrne, Raymond Harry; Guttromson, Ross; Tesfatsion, Leigh S. [Iowa State University, Ames, IA

2013-04-01T23:59:59.000Z

377

Unitized Design for Home Refueling Appliance for Hydrogen Generation to 5,000 psi - DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report  

NLE Websites -- All DOE Office Websites (Extended Search)

2 2 DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report Timothy Norman (Primary Contact), Monjid Hamdan Giner, Inc. (formerly Giner Electrochemical Systems, LLC) 89 Rumford Avenue Newton, MA 02466 Phone: (781) 529-0556 Email: tnorman@ginerinc.com DOE Manager HQ: Eric L. Miller Phone: (202) 287-5829 Email: Eric.Miller@hq.doe.gov Contract Number: DE-SC0001486 Project Start Date: August 15, 2010 Project End Date: August 14, 2012 Fiscal Year (FY) 2012 Objectives Detail design and demonstrate subsystems for a unitized * electrolyzer system for residential refueling at 5,000 psi to meet DOE targets for a home refueling appliance (HRA) Fabricate and demonstrate unitized 5,000 psi system * Identify and team with commercialization partner(s) * Technical Barriers

378

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Project Tracking...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

& SYSTEMS ENGINEERING PROGRAM: Project Planning Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Design Checklist Energy.gov Careers & Internships Policy &...

379

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM : Acceptance Checklist...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

& SYSTEMS ENGINEERING PROGRAM: Software Design Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Project Tracking Checklist Energy.gov Careers & Internships Policy &...

380

Emergency Response | National Nuclear Security Administration  

NLE Websites -- All DOE Office Websites (Extended Search)

About Us > Our Programs > Emergency Response About Us > Our Programs > Emergency Response Emergency Response NNSA's Office of Emergency Operations is the United States government's primary capability for radiological and nuclear emergency response and for providing security to the nation from the threat of nuclear terrorism. The Office of Emergency Operations maintains a high level of readiness for protecting and serving the U.S. and its allies through the development, implementation and coordination of programs and systems designed to serve as a last line of defense in the event of a nuclear terrorist incident or other types of radiological accident. This readiness level provides the U.S. government with quickly deployable, dedicated resources capable of responding rapidly and comprehensively to nuclear or radiological incidents

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Configuring load as a resource for competitive electricity markets--Review of demand response programs in the U.S. and around the world  

E-Print Network (OSTI)

Contingency programs of NYISO, PJM, ISO-NE, and BG&E wereand more than $900/MWh in PJM’s region. All three programsEnergy Exchange Program, O1 PJM ISO Independent System

Heffner, Grayson C.

2002-01-01T23:59:59.000Z

382

Advanced Management Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Management Program Advanced Management Program Advanced Management Program Program Overview: The Advanced Management Program (AMP) is a 14-week graduate program designed for middle-and senior-level managers and leaders responsible for promoting and attaining national and international security goals through the strategic use of information and information technology. This is a highly interactive, student-centered, educational experience in which leadership skills and abilities are emphasized. AMP students form a learning community that fosters multiple perspectives on a wide range of issues. They share knowledge and best practices, strive to become better leaders and decision makers, and master the tools of lifelong learning. Interaction with fellow students, faculty, and government executive guest

383

When it comes to Demand Response, is FERC its Own Worst Enemy?  

E-Print Network (OSTI)

made between traditional demand response (DR) programs andpricing. Traditional demand response programs typically payFor overviews of demand response technologies and program

Bushnell, James; Hobbs, Benjamin; Wolak, Frank A.

2009-01-01T23:59:59.000Z

384

Secretarial Awards Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Secretarial Awards Program Secretarial Awards Program The Secretary's Awards Program is designed to recognize the career service and contributions of DOE employees to the mission...

385

QA in Design Guidance  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9 9 U.S. DEPARTMENT OF ENERGY OFFICE OF ENVIRONMENTAL MANAGEMENT Guidance Document for Integrating Quality Assurance During the Design and Construction Life Cycle September 2011 Page 2 of 29 FOREWORD This Department of Energy (DOE) Environmental Management (EM) guidance document is approved for use by all DOE EM organizational units and contractors performing work for EM. A project's Quality Assurance Program assigns responsibilities and authorities, defines policies and requirements, and provides for the performance and assessment of work that provides confidence that required level of quality is achieved, commensurate with the various project requirements. This guidance document offers for evaluation, by project personnel from EM and contractor

386

Opportunities, Barriers and Actions for Industrial Demand Response in California  

E-Print Network (OSTI)

and Techniques for Demand Response, report for theand Reliability Demand Response Programs: Final Report.Demand Response

McKane, Aimee T.

2009-01-01T23:59:59.000Z

387

Independent Oversight Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Independent Oversight Program Independent Oversight Program Home Office of Security and Cyber Evaluations Office of Safety and Emergency Management Evaluations Guidance Documents › Security and Cyber Evaluations › Safety and Emergency Management Evaluations Reports › Physical Security › Cyber Security › Safety and Emergency Management Evaluations Reports › Prior Environment, Safety and Health Evaluations Reports ›Prior Emergency Management Evaluations Reports Contact Us HSS Logo Welcome to the Independent Oversight Program The Independent Oversight Program is implemented by the Office of Health, Safety and Security's (HSS) Office of Enforcement and Oversight. The mission of this program is to provide DOE line management, Congress, and other stakeholders with an independent evaluation of the effectiveness of DOE policy and line management performance in safety and security, and other critical areas as directed by the Secretary of Energy. The Office of Enforcement and Oversight performs this mission by conducting activity, facility, site, and Department-wide performance-based assessments that are designed to verify that the Department's safeguards and security interests are protected, that the Department can effectively respond to emergencies, and that Departmental employees, the public, and the environment are protected from hazardous operations and materials. These assessments complement line management's responsibility for security and safety program oversight and self-assessments. The outcome of these assessments are reports that provide information and analysis regarding the effectiveness, vulnerabilities, and trends in DOE safety and security programs, and identify issues requiring corrective action as well as recommended areas for improvement.

388

Experimental designs optimally balanced for trend  

Science Conference Proceedings (OSTI)

Keywords: BLKL exchange algorithm, BT algorithm, adjustment algorithm, design efficiency, optimum design, response surface, trend-free design

A. C. Atkinson; A. N. Donev

1996-11-01T23:59:59.000Z

389

Report of the US Nuclear Regulatory Commission Piping Review Committee. Volume 2. Evaluation of seismic designs: a review of seismic design requirements for Nuclear Power Plant Piping  

Science Conference Proceedings (OSTI)

This document reports the position and recommendations of the NRC Piping Review Committee, Task Group on Seismic Design. The Task Group considered overlapping conservation in the various steps of seismic design, the effects of using two levels of earthquake as a design criterion, and current industry practices. Issues such as damping values, spectra modification, multiple response spectra methods, nozzle and support design, design margins, inelastic piping response, and the use of snubbers are addressed. Effects of current regulatory requirements for piping design are evaluated, and recommendations for immediate licensing action, changes in existing requirements, and research programs are presented. Additional background information and suggestions given by consultants are also presented.

Not Available

1985-04-01T23:59:59.000Z

390

Decontamination systems information and research program -- Literature review in support of development of standard test protocols and barrier design models for in situ formed barriers project  

SciTech Connect

The US Department of Energy is responsible for approximately 3,000 sites in which contaminants such as carbon tetrachloride, trichlorethylene, perchlorethylene, non-volatile and soluble organic and insoluble organics (PCBs and pesticides) are encountered. In specific areas of these sites radioactive contaminants are stored in underground storage tanks which were originally designed and constructed with a 30-year projected life. Many of these tanks are now 10 years beyond the design life and failures have occurred allowing the basic liquids (ph of 8 to 9) to leak into the unconsolidated soils below. Nearly one half of the storage tanks located at the Hanford Washington Reservation are suspected of leaking and contaminating the soils beneath them. The Hanford site is located in a semi-arid climate region with rainfall of less than 6 inches annually, and studies have indicated that very little of this water finds its way to the groundwater to move the water down gradient toward the Columbia River. This provides the government with time to develop a barrier system to prevent further contamination of the groundwater, and to develop and test remediation systems to stabilize or remove the contaminant materials. In parallel to remediation efforts, confinement and containment technologies are needed to retard or prevent the advancement of contamination plumes through the environment until the implementation of remediation technology efforts are completed. This project examines the various confinement and containment technologies and protocols for testing the materials in relation to their function in-situ.

NONE

1994-12-01T23:59:59.000Z

391

Small Business Programs  

National Nuclear Security Administration (NNSA)

Business At A Time NNSA is responsible for the management and security of the nation's nuclear weapons, nuclear nonproliferation, and naval reactor programs. It also responds to...

392

Identity Management Systems Program Homepage  

Science Conference Proceedings (OSTI)

Identity Management Systems Program. ... Identity management systems are responsible for the creation, use, and termination of electronic identities. ...

2010-10-05T23:59:59.000Z

393

Factors affecting the design of a partnership program to facilitate adoption of agricultural practices among small-scale farmers, Mpongwe, Zambia  

E-Print Network (OSTI)

The purpose of the study conducted from December 2001 through February 2002 was to collect data needed to facilitate the design of a partnership program involving Mpongwe Development Company (MDC) that would enable the adoption of sustainable, environmentally friendly agricultural practices by the small-scale farmers in Mpongwe District, Zambia. Eleven separate surveys were conducted to gather descriptive information from four groups: 210 small-scale farmers, traditional chiefs, government departments, and MDC. Substantial developmental work continues in Mpongwe. More than 50% of the small-scale farmers were aware of development organizations. The extension service and MDC both enjoyed relatively high awareness by farmers at 82.3% and 87.4%, respectively. The extent of the effectiveness of this work is still unknown because the scope of the study was only to identify areas of possible developmental collaboration. The recently constructed highway and the government Intermediate Means of Transport (IMT) program has opened the District to many development opportunities. To establish guidelines for the proposed collaborative program mission and goals, three key emerging areas were identified. They were finance, organization, and technical assistance. Only 21.4% of the small-scale farmers reported being in arrears. About 79.1% of participating farmer sales consisted of roadside sales with about two percent selling through cooperatives. Only 44% of small-scale farmers reported being members of co-operatives. The only crop reported by the small-scale farmers as being grown in areas greater than one hectare was maize (84.7%). More than 50% of the small-scale farmers surveyed expressed satisfaction with the services offered by the extension service. Information obtained from the extension service was reported by 51.6% of small-scale farmers. Traditional chiefs and radio were the second most frequent source of information. Recommendations were that (1) Government and non-government organizations should partner in agricultural development efforts, (2) The extension service must engage the private sector, and (3) The relevance of the extension service is evident, but a change of approach is necessary. Both the private sector and the extension service will benefit from suggested changes.

Musoma, Henry Kasonde

2002-01-01T23:59:59.000Z

394

Notices Heritage Program Volunteer Program; (b)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

67 Federal Register 67 Federal Register / Vol. 78, No. 60 / Thursday, March 28, 2013 / Notices Heritage Program Volunteer Program; (b) the USAF Heritage Program the means with which to select respondents pursuant to the USAF Heritage Program Volunteer Program. The primary use of the information collection includes the evaluation and placement of respondents within the USAF Heritage Program Volunteer Program. Affected Public: Business or other for profit; Not-for-profit Institutions. Annual Burden Hours: 49.5. Number of Respondents: 198. Responses per Respondent: 1. Average Burden per Response: 15 minutes. Frequency: On occasion. SUPPLEMENTARY INFORMATION: Summary of Information Collection Respondents are individuals expressing an interest in participating in the USAF Heritage Program Volunteer

395

Wireless Demand Response Controls for HVAC Systems  

Science Conference Proceedings (OSTI)

The objectives of this scoping study were to develop and test control software and wireless hardware that could enable closed-loop, zone-temperature-based demand response in buildings that have either pneumatic controls or legacy digital controls that cannot be used as part of a demand response automation system. We designed a SOAP client that is compatible with the Demand Response Automation Server (DRAS) being used by the IOUs in California for their CPP program, design the DR control software, investigated the use of cellular routers for connecting to the DRAS, and tested the wireless DR system with an emulator running a calibrated model of a working building. The results show that the wireless DR system can shed approximately 1.5 Watts per design CFM on the design day in a hot, inland climate in California while keeping temperatures within the limits of ASHRAE Standard 55: Thermal Environmental Conditions for Human Occupancy.

Federspiel, Clifford

2009-06-30T23:59:59.000Z

396

William G. Billotte, Program Manager, Counterterrorism And ...  

Science Conference Proceedings (OSTI)

... Counterterrorism And Response Technologies (CART) program ... Biological Radiation Nuclear and Explosive (CBRNE) technology needs ...

2011-06-10T23:59:59.000Z

397

Design Basis Threat | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Design Basis Threat | National Nuclear Security Administration Design Basis Threat | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Design Basis Threat Home > About Us > Our Programs > Nuclear Security > Design Basis Threat Design Basis Threat NNSA has taken aggressive action to improve the security of its nuclear weapons material (often referred to as special nuclear material, or SNM)

398

DOE Technical Standards Program Procedures  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Revision: 4 Date: August 1, 2000 TECHNICAL STANDARDS PROGRAM RESPONSIBILITIES U.S. Department of Energy Office of Nuclear Safety Policy and Standards Washington, D.C. 20585 DOE-TSPP-1 Responsibilities Revision: 4 Date: August 1, 2000 DOE Technical Standards Program i CONTENTS Paragraph Page 1. SCOPE........................................................................................................................................... 1 1.1 Purpose ................................................................................................................... 1 1.2 Applicability.............................................................................................................. 1 2. PROGRAM RESPONSIBILITIES ................................................................................................... 1

399

Investment Returns from Responsible Property Investments: Energy Efficient,  

NLE Websites -- All DOE Office Websites (Extended Search)

Investment Returns from Responsible Property Investments: Energy Investment Returns from Responsible Property Investments: Energy Efficient, Transit-oriented and Urban Regeneration Office Properties in the US from 1998-2008 Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager

400

Building Design | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Design Building Design October 16, 2013 - 4:41pm Addthis Planning, Programming & Budgeting Building Design Project Construction Integrating renewable energy within Federal new construction or major renovations is critical at each phase of the design process. This overview covers considerations for renewable energy in the design phases of a construction project, including choosing the design team, the design team charrette, preliminary design, schematic design, design development, and construction documents. Information on this page introduces each of the design phases and provides a link to deeper-level information. Key Actions in Building Design Require specific renewable energy experience and skills for design team. Prioritize energy-related program

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

EM International Program Action Table  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EM INTERNATIONAL COOPERATIVE PROGRAM] October, 2012 EM INTERNATIONAL COOPERATIVE PROGRAM] October, 2012 E M I n t e r n a t i o n a l P r o g r a m s Page 1 ACTION TABLE Subject Lead Office Engaging Country Meeting Location Purpose Status Date of Event 3 rd US/German Workshop on Salt Repository Research, Design and Operations N. Buschman, EM-22 Germany Albuquerque & Carlsbad, NM Continue collaboration with Germans on salt repository research, design and operations. Draft agenda prepared. October 8-12, 2012 International Framework for Nuclear Energy Cooperation (IFNEC) Ministerial R. Elmetti, EM- 2.1 Multilateral Marrakech, Morocco To support the development of nuclear energy infrastructure globally through workforce training, information sharing, and approaches related to the safe, secure and responsible use of

402

Option Value of Electricity Demand Response  

E-Print Network (OSTI)

Table 1. “Economic” demand response and real time pricing (Implications of Demand Response Programs in CompetitiveAdvanced Metering, and Demand Response in Electricity

Sezgen, Osman; Goldman, Charles; Krishnarao, P.

2005-01-01T23:59:59.000Z

403

RANGE DESIGN CRITERIA  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RANGE DESIGN CRITERIA RANGE DESIGN CRITERIA U.S. DEPARTMENT OF ENERGY Office of Health, Safety and Security AVAILABLE ONLINE AT: INITIATED BY: http://www.hss.energy.gov Office of Health, Safety and Security Notices This document is intended for the exclusive use of elements of the Department of Energy (DOE), to include the National Nuclear Security Administration, their contractors, and other government agencies/individuals authorized to use DOE facilities. DOE disclaims any and all liability for personal injury or property damage due to use of this document in any context by any organization, group, or individual, other than during official government activities. Local DOE management is responsible for the proper execution of firearms-related programs for

404

Designing Studies for Dose Response  

E-Print Network (OSTI)

f 6. Atkinson, A. C. and Donev, A. N. Optimum Experimentaldifficulty) Atkinson and Donev; F e d o r o ~ and Pazman. *

Weng-Kee Wong; Peter A. Lachenbruch

2011-01-01T23:59:59.000Z

405

Solar irrigation program plan. Revision  

DOE Green Energy (OSTI)

This report describes the ERDA solar irrigation program plan through fiscal year 1979. It is an update of the original program plan as outlined in Sandia Report SAND--76-0594. The updated goals of the plan are listed, the participants named, and their responsibilities outlined. ERDA has the program responsibility, ERDA field offices the contractural responsibility, and Sandia Laboratories the technical direction responsibilities. Three solar irrigation experiments planned, system analyses to be conducted, and the participants of the program are described. This document is intended to be used as a program guide for accomplishing the program goals.

Alvis, R.L.; Vandevender, S.G.

1977-06-01T23:59:59.000Z

406

Has the Pattern of Practice in the Prescription of Radiotherapy for the Palliation of Thoracic Symptoms Changed Between 1999 and 2006 at the Rapid Response Radiotherapy Program?  

Science Conference Proceedings (OSTI)

Purpose: Eleven randomized controlled trials (RCT) comparing various radiotherapy (RT) schedules for locally advanced lung cancer published since 1991 found no difference in palliation of intrathoracic symptoms. The most commonly prescribed schedule by Canadian Radiation Oncologists (RO) (20 Gy in five fractions [20 Gy/5]), when first evaluated versus 10 Gy/1 in a 2002 RCT, showed a significant survival benefit. A subsequent RCT assessing 20 Gy/5 found worse survival versus 16 Gy/2. This study examines whether the RT prescription for lung cancer palliation in the Rapid Response Radiotherapy Program (RRRP) has changed over time. Methods and Materials: Chart review was conducted for patients treated with palliative thoracic RT across three periods (1999-2006). Patient demographics, tumor, treatment, and organizational factors were analyzed descriptively. Chi-square test was used to detect differences in proportions between unordered categorical variables. Continuous variables were tested using analysis of variance. Multivariate logistic regression was used to identify independent predictors of RT schedule prescribed. Results: A total of 117 patients received 121 courses of palliative thoracic RT. The most common dose (20 Gy/5) comprised 65% of courses in 1999, 68% in 2003, and 60% in 2005-2006 (p = 0.76). The next most common dose was 30 Gy/10 (13%). Overall, the median survival was 14.9 months, independent of RT schedule (p = 0.68). Multivariate analysis indicated palliative chemotherapy and certification year of RO were significant predictors of prescription of 20 Gy/5. Conclusion: RT schedule for palliation of intrathoracic symptoms did not mirror the results of sequential, conflicting RCTs, suggesting that factors other than the literature influenced practice patterns in palliative thoracic RT.

Fairchild, Alysa [Rapid Access Palliative Radiotherapy Program, Cross Cancer Institute, Edmonton, Alberta (Canada); Goh, Philiz; Sinclair, Emily; Barnes, Elizabeth A. [Rapid Response Radiotherapy Program, Odette Cancer Centre, Sunnybrook Health Sciences Centre, Toronto, Ontario (Canada); Ghosh, Sunita [Department of Experimental Oncology, Cross Cancer Institute, Edmonton, Alberta (Canada); Danjoux, Cyril; Barbera, Lisa; Tsao, May [Rapid Response Radiotherapy Program, Odette Cancer Centre, Sunnybrook Health Sciences Centre, Toronto, Ontario (Canada); Chow, Edward [Rapid Response Radiotherapy Program, Odette Cancer Centre, Sunnybrook Health Sciences Centre, Toronto, Ontario (Canada)], E-mail: Edward.Chow@sunnybrook.ca

2008-03-01T23:59:59.000Z

407

Designing a Large-Scale Federal Greenhouse Gas Offsets Program in the United States: Policy Choices and Lessons Learned from the Cle an Development Mechanism and Other Offsets Programs  

Science Conference Proceedings (OSTI)

If the United States decides to take broader action in the future to mitigate climate change, policy discussions may once again focus on development of a greenhouse gas (GHG) cap-and-trade program combined with development of a large-scale GHG emissions offsets program. The compliance flexibility offered by these programs, and the economic incentives they create to identify and implement low-cost compliance options, have the potential to reduce significantly the costs to achieve significant emissions lim...

2011-11-29T23:59:59.000Z

408

Home audit program: management manual  

Science Conference Proceedings (OSTI)

Many public power systems have initiated home energy audit programs in response to the requests of their consumers. The manual provides smaller public power systems with the information and specific skills needed to design and develop a program of residential energy audits. The program is based on the following precepts: locally owned public systems are the best, and in many cases the only agencies available to organize and coordinate energy conservation programs in many smaller communities; consumers' rights to energy conservation information and assistance should not hinge on the size of the utility that serves them; in the short run, public power systems of all sizes should offer residential energy conservation assistance to their consumers, because such assistance is desirable, necessary, and in the public interest; and in the long run, such programs will complement national energy goals and will produce economic benefits for both consumers and the public power system. A detailed description of home audit program planning, organization, and management are given. (MCW)

Not Available

1980-09-01T23:59:59.000Z

409

DOE O 328.1, Human Capital Management Accountability Program  

Directives, Delegations, and Requirements

The Order establishes requirements, roles and responsibilities for the Human Capital Management Accountability Program (HCMAP) for human resources programs and ...

2008-08-01T23:59:59.000Z

410

SCIENCE Program  

NLE Websites -- All DOE Office Websites (Extended Search)

SCIENCE Program SCIENCE Program early science program Early at the Argonne Leadership Computing Facility CONTACT  Argonne Leadership Computing Facility | www.alcf.anl.gov | (877) 737-8615 Climate-Weather Modeling Studies Using a Prototype Global Cloud-System Resolving Model PI: Venkatramani Balaji Geophysical Fluid Dynamics Laboratory Award: 150 Million Hours Materials Design and Discovery: Catalysis and Energy Storage PI: Larry Curtiss Argonne National Laboratory Award: 50 Million Hours Direct Numerical Simulation of Autoignition in a Jet in a Cross-Flow PI: Christos Frouzakis Swiss Federal Institute of Technology Award: 150 Million Hours High-Accuracy Predictions of the Bulk Properties of Water PI: Mark Gordon Iowa State University Award: 150 Million Hours Cosmic Structure Probes

411

8/10/2010 1 DOE Offshore Wind RFI Response: DEOA-EE0000385, DOE Offshore Wind Program, Input Requested for  

E-Print Network (OSTI)

onshore wind and other renewable energy sources including solar, geothermal, biomass, and small hydro-Losique, Program Manager, Wind and Water Power Program (WWPP) Office of Energy Efficiency and Renewable Energy U.S. Department of Energy (DOE) Dear Mr. Beaudry-Losique, Staff of the California Energy Commission provide

Islam, M. Saif

412

Burbank Water and Power - Green Building Incentive Program | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Burbank Water and Power - Green Building Incentive Program Burbank Water and Power - Green Building Incentive Program Burbank Water and Power - Green Building Incentive Program < Back Eligibility Commercial Multi-Family Residential Nonprofit Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Bioenergy Solar Lighting Windows, Doors, & Skylights Heating Buying & Making Electricity Water Water Heating Wind Program Info State California Program Type Green Building Incentive Provider Rebates The U.S. Green Building Council is a non-profit organization that promotes the design and construction of buildings that are environmentally responsible, profitable, and healthy places to live and work. The Green Building Council developed the Leadership in Energy and Environmental

413

TAP 3, Training Program Support Manual  

SciTech Connect

Training programs at DOE facilities should provide well-trained, qualified personnel to safely and efficiently operate the facilities in accordance with DOE requirements. A need has been identified for guidance regarding analysis, design, development, implementation, and evaluation of consistent and reliable performance-based training programs. Accreditation of training programs at Category A reactors and high-hazard and selected moderate-hazard nonreactor nuclear facilities will assure consistent, appropriate, and cost-effective training of personnel responsible for the operation, maintenance, and technical support of these facilities. Training programs that are designed and based on systematically determined job requirements, instead of subjective estimation of trainee needs, yield training activities that are consistent and develop or improve knowledge, skills, and abilities that can be directly related to the work setting. Because the training is job-related, the content of these programs more efficiently and effectively meets the needs of the employee. Besides a better trained work force, a greater level of operational reactor safety can be realized. This manual is intended to provide an overview of the accreditation process and a brief description of the elements necessary to construct and maintain training programs that are based on the requirements of the job. Two companion manuals provide additional information to assist contractors in their efforts to accredit training programs.

Not Available

1991-07-01T23:59:59.000Z

414

Summary of the 2006 Automated Demand Response Pilot  

E-Print Network (OSTI)

This paper discusses the specific concept for, design of, and results from a pilot program to automate demand response with critical peak pricing. California utilities have been exploring the use of critical peak pricing (CPP) to help reduce peak day summer time electric loads. CPP is a form of price-responsive demand response. This Automated Critical Peak Pricing (Auto-CPP) project from 2006 draws upon three years of previous research and demonstrations from the years of 2003, 2004, and 2005. The purpose of automated demand response (DR) is to improve the responsiveness and participation of electricity customers in DR programs and lower overall costs to achieve DR. Auto-CPP is a form of automated demand response (Auto-DR).

Piette, M.; Kiliccote, S.

2007-01-01T23:59:59.000Z

415

A National Forum on Demand Response: Results on What Remains to Be Done to Achieve Its Potential- Program Design and Implementation Working Group  

Energy.gov (U.S. Department of Energy (DOE))

In July 2011, the Federal Energy Regulatory Commission's (FERC) staff and the Department of Energy (DOE) jointly submitted to Congress a required “Implementation Proposal for the National Action...

416

Design And Simulation Of A Real-time Price Demand Response Program For Electricity Subject To A Capacity Constraint For The Philadelphia Navy Yard.  

E-Print Network (OSTI)

??This thesis is based on data from the Philadelphia Navy Yard, which has its own transmission and distribution electric micro-grid and is home for commercial… (more)

Cortes, Mercedes

2012-01-01T23:59:59.000Z

417

Centralized Procurement Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Centralized Procurement Program What's New Who to Contact Current Products BOAs MOC Integrated Team Program Elements Future Products Welcome to the Carlsbad Field OfficeÂ’s (CBFO) Centralized Procurement Program (CPP) Web Page. The purpose of the Centralized Procurement Program is to provide a standardized, economical system of acquisition and distribution of common or critical transuranic (TRU) waste products. The program is available for use by DOE contractors. The program is designed to allow user sites to procure products manufactured to standardized quality, procurement, and engineering requirements. The WIPP Management & Operation Contractor (MOC), Washington TRU Solutions (WTS), administers the program. WTS is the design authority for all products currently offered in the program.

418

Mass Market Demand Response  

NLE Websites -- All DOE Office Websites (Extended Search)

Mass Market Demand Response Mass Market Demand Response Speaker(s): Karen Herter Date: July 24, 2002 - 12:00pm Location: Bldg. 90 Demand response programs are often quickly and poorly crafted in reaction to an energy crisis and disappear once the crisis subsides, ensuring that the electricity system will be unprepared when the next crisis hits. In this paper, we propose to eliminate the event-driven nature of demand response programs by considering demand responsiveness a component of the utility obligation to serve. As such, demand response can be required as a condition of service, and the offering of demand response rates becomes a requirement of utilities as an element of customer service. Using this foundation, we explore the costs and benefits of a smart thermostat-based demand response system capable of two types of programs: (1) a mandatory,

419

Low Dose Radiation Research Program: National Laboratories  

NLE Websites -- All DOE Office Websites (Extended Search)

National Laboratories National Laboratories The Low Dose Radiation Program funding encompasses several Scientific Focus Areas (SFAs). The SFAs fund merit-reviewed research at DOE national laboratories. This management approach was created in 2008 by the Office of Biological and Environmental Research (BER) within the U.S. Department of Energy's (DOE's) Office of Science. PNNL's Low Dose Radiation Research Program Scientific Focus Area Linear and Nonlinear Tissue-Signaling Mechanisms in Response to Low Dose and Low Dose-Rate Radiation This program is funded as a U.S. Department of Energy Scientific Focus Area (SFA), and is an integrated cooperative program to understand low dose radiation effects in a complex model system. Coordinating Multidisciplinary Expertise The SFAs are designed to take advantage of the multidisciplinary,

420

Biomass Thermochemical Conversion Program: 1986 annual report  

DOE Green Energy (OSTI)

Wood and crop residues constitute a vast majority of the biomass feedstocks available for conversion, and thermochemical processes are well suited for conversion of these materials. Thermochemical conversion processes can generate a variety of products such as gasoline hydrocarbon fuels, natural gas substitutes, or heat energy for electric power generation. The US Department of Energy is sponsoring research on biomass conversion technologies through its Biomass Thermochemical Conversion Program. Pacific Northwest Laboratory has been designated the Technical Field Management Office for the Biomass Thermochemical Conversion Program with overall responsibility for the Program. This report briefly describes the Thermochemical Conversion Program structure and summarizes the activities and major accomplishments during fiscal year 1986. 88 refs., 31 figs., 5 tabs.

Schiefelbein, G.F.; Stevens, D.J.; Gerber, M.A.

1987-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

The Application and Verification of ASHRAE 152-2004 (Method of Test for Determining the Design and Seasonal Efficiencies of Residential Thermal Distribution Systems) to DOE-2-1e Simulation Program  

E-Print Network (OSTI)

This report describes the application and verification of duct model on DOE 2.1e version 119 using ASHRAE 152-2004 (Method of Test for Determining the Design and Seasonal Efficiencies of Residential Thermal Distribution Systems). It begins with a concept of duct model which is developed by ASHRAE and shows the application and the verification of the duct model to DOE 2.1e version 119 simulation program.

Kim, S.; Haberl, J. S.

2008-06-01T23:59:59.000Z

422

Molten Carbonate Fuel Cell Product Design Improvement  

DOE Green Energy (OSTI)

This annual report provides results of Energy Research Corporation`s technical approach to performing the program `Molten Carbonate Fuel Cell (MCFC) Product Design Improvement` covered under the DOE-ERC Cooperative Agreement DE-FC21-95MC31184. This work is supported by DOE/METC and DOD/DARPA as well as ERC Team funds. The objective of the DOE-sponsored program is to advance the direct carbonate fuel cell technology to a level suitable for commercial entry for civilian applications. The overall objective of the DOD/DARPA initiative is to adapt the civilian 2 MW-Class fuel cell power plant for dual fuel DOD applications. This program is designed to advance the carbonate fuel cell technology from the power plant demonstration status to the commercial entry early production unit design stage. The specific objectives which will allow attainment of these overall program goals are: (1) Provide environmental information to support DOE evaluation with respect to the National Environmental Policy Act (NEPA), (2) Define market-responsive power plant requirements and specifications, (3) Establish design for multifuel, low-cost, modular, market-responsive power plant, (4) Resolve power plant manufacturing issues and define the design for the commercial manufacturing facility, (5) Acquire capabilities to support developmental testing of 0370 stacks and BOP equipment as required to prepare for commercial design, and (6) Resolve stack and BOP equipment technology issues and design, build, and field test a modular commercial prototype power plant to demonstrate readiness of the power plant for commercial entry.

NONE

1996-03-01T23:59:59.000Z

423

Homeland Security Programs | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Homeland Security Programs Homeland Security Programs SHARE Homeland Security Programs The Homeland Security Programs support the Department of Homeland Security (DHS), other federal and state agencies, and commercial partners. Through the integration of a number of key competencies, ORNL is able to provide critical operational, technical, and scientific support to these sponsors. A key focus of this area is to translate the critical research into operational capability for the security, protection, response, and recovery of the nation against natural and man-made events. Research Areas detecting, preventing, and reversing the proliferation of weapons of mass destruction deploying integrated systems for incident awareness, detection, and response providing technology for detecting explosives at the

424

Design review report for multiport riser final design review  

DOE Green Energy (OSTI)

This design review examined the design documents contained in a notebook prepared for the final design review of the multiport riser assembly. This assembly will support the Hydrogen Mitigation Test program for mitigation of safety issues for Hanford Waste Tank 241-SY-101. The purpose of the Multiport Riser is to provide multiple access ports of several diameters in a single 42 inch riser for simultaneous access of test and support equipment. The notebook was titled: {open_quotes}Multiport Riser Final Design Review.{close_quotes} The review was conducted using a database comment registration system whereby the reviewer comments were entered into the database and each comment was given a unique identifier. During the review, each comment was referred to by its identifier. Changes to comments, responses, and actions needed were made with the agreement of the committee and the reviewers at the formal design review meeting held March 1, 1994. When the structural analyses were available, they were distributed for review which allowed closure of all design review comments. Approval of the design was achieved and supporting documents are included in this report.

McWethy, L.M.; Sheen, E.M.

1994-05-01T23:59:59.000Z

425

A method to expose the hidden structure of Fortran programs  

Science Conference Proceedings (OSTI)

Program structure is inherent in program design; therefore special keywords such as "if... then ... else” or "do ... while” ... Keywords: Flow graph, Reducibility, Structured programming

Loren P. Meissner

1974-01-01T23:59:59.000Z

426

A Training Program for Filter-Search Mine Detection Dogs  

E-Print Network (OSTI)

comparative Psychology A Training Program for Filter-Searchbehind and results of a training program designed to produceunderlying the training program were: (1) minimise

Fjellanger, R.; Andersen, E. K.; McLean, Ian. G.

2002-01-01T23:59:59.000Z

427

Better Buildings Neighborhood Program: Tools and Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Documents and Reports Background Program Evaluation Program Design Marketing and Driving Demand Financing and Incentives Workforce Development Partnering with Utilities Technical...

428

Building Energy Software Tools Directory: Acoustics Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Acoustics Program Developed to help designers accurately model the sound level reaching building tenant's ears, the Trane Acoustics Program (TAP) "projects" equipment sound power...

429

Indianapolis Power & Light- Residential Energy Incentives Program  

Energy.gov (U.S. Department of Energy (DOE))

The Indianapolis Power and Light Builder Energy Efficiency Rebate Program is designed to encourage the construction of energy efficient new homes. The program offers incentives for certified...

430

Catawba County - Green Construction Permitting Incentive Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Heating & Cooling Design & Remodeling Solar Buying & Making Electricity Water Heating Program Info State North Carolina Program Type Green Building Incentive Provider...

431

Building Energy Software Tools Directory: Ground Loop Design  

NLE Websites -- All DOE Office Websites (Extended Search)

Loop Design Ground Loop Design logo Ground Loop Design is a versatile ground source heat pump system design program that helps the trained geothermal HVAC designerengineer...

432

A National Forum on Demand Response: Results on What Remains to Be Done to  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A National Forum on Demand Response: Results on What Remains to Be A National Forum on Demand Response: Results on What Remains to Be Done to Achieve Its Potential - Program Design and Implementation Working Group A National Forum on Demand Response: Results on What Remains to Be Done to Achieve Its Potential - Program Design and Implementation Working Group In July 2011, the Federal Energy Regulatory Commission's (FERC) staff and the Department of Energy (DOE) jointly submitted to Congress a required "Implementation Proposal for the National Action Plan on Demand Response." The Implementation Proposal was for FERC's June 2010 National Action Plan for Demand Response. Part of the July 2011 Implementation Proposal called for a "National Forum" on demand response to be conducted by DOE and FERC. Given the

433

High-Temperature-Turbine Technology Program: Phase II. Technology test and support studies. Design and development of the liquid-fueled high-temperature combustor for the Turbine Spool Technology Rig  

SciTech Connect

The concept selected by Curtiss-Wright for this DOE sponsored High Temperature Turbine Technology (HTTT) Program utilizes transpiration air-cooling of the turbine subsystem airfoils. With moderate quantities of cooling air, this method of cooling has been demonstrated to be effective in a 2600 to 3000/sup 0/F gas stream. Test results show that transpiration air-cooling also protects turbine components from the aggressive environment produced by the combustion of coal-derived fuels. A new single-stage, high work transpiration air-cooled turbine has been designed and fabricated for evaluation in a rotating test vehicle designated the Turbine Spool Technology Rig (TSTR). The design and development of the annular combustor for the TSTR are described. Some pertinent design characteristics of the combustor are: fuel, Jet A; inlet temperature, 525/sup 0/F; inlet pressure, 7.5 Atm; temperature rise, 2475/sup 0/F; efficiency, 98.5%; exit temperature pattern, 0.25; and exit mass flow, 92.7 pps. The development program was conducted on a 60/sup 0/ sector of the full-round annular combustor. Most design goals were achieved, with the exception of the peak gas exit temperature and local metal temperatures at the rear of the inner liner, both of which were higher than the design values. Subsequent turbine vane cascade testing established the need to reduce both the peak gas temperature (for optimum vane cooling) and the inner liner metal temperature (for combustor durability). Further development of the 60/sup 0/ combustor sector achieved the required temperature reductions and the final configuration was incorporated in the TSTR full-annular burner.

1981-06-01T23:59:59.000Z

434

Pattern-Based Parallel Programming  

Science Conference Proceedings (OSTI)

The advantages of pattern-based programming have been well-documented in the sequential programming literature. However patterns have yet to make their way into mainstream parallel computing, even though several research tools support them. There are ... Keywords: parallel programming environment, design patterns, frameworks, meta-programming

S. Bromling; S. MacDonald; J. Anvik; J. Schaeffer; D. Szafron; K. Tan

2002-08-01T23:59:59.000Z

435

Research on optimization design of the heating/cooling channels for rapid heat cycle molding based on response surface methodology and constrained particle swarm optimization  

Science Conference Proceedings (OSTI)

The aim of this work is to optimize the layout of the heating/cooling channels for rapid heat cycle molding with hot medium heating and coolant cooling by using response surface methodology and optimization technique. By means of a Box-Behnken experiment ... Keywords: Injection molding, Particle swarm optimization (PSO), Rapid heat cycle molding (RHCM), Response surface methodology (RSM), Steam heating

Guilong Wang; Guoqun Zhao; Huiping Li; Yanjin Guan

2011-06-01T23:59:59.000Z

436

Clean air program: Design guidelines for bus transit systems using liquefied petroleum gas (LPG) as an alternative fuel. Final report, July 1995-April 1996  

Science Conference Proceedings (OSTI)

The Federal Transit Administration (FTA) has initiated the development of `Design Guidelines for Bus Transit Systems Using Alternative Fuels.` This report provides design guidelines for the safe uses of Liquefied Petroleum Gas (LPG). It forms a part of the series of individual monographs being published by the FTA on (the guidelines for the safe use of) Compressed Natural Gas (CNG), Liquefied Natural Gas (LNG), Liquefied Petroleum Gas (LPG) and alcohol fuels (Methanol and Ethanol). Each report in this series describes for the subject fuel the important fuel properties, guidelines for the design and operation of bus fueling, storage and maintenance facilities, issues on personnel training and emergency preparedness.

Raj, P.K.; Hathaway, W.T.; Kangas, R.

1996-09-01T23:59:59.000Z

437

LFRG Program Management Plan  

Energy.gov (U.S. Department of Energy (DOE))

The purpose of the EM  Low-Level Waste Disposal Facility Federal Review Group Program Management Plan (LFRG PMP) is to establish the LFRG roles and responsibilities, the LFRG management processes,...

438

Dam Safety Program (Maryland)  

Energy.gov (U.S. Department of Energy (DOE))

The Dam Safety Division within the Department of the Environment is responsible for administering a dam safety program to regulate the construction, operation, and maintenance of dams to prevent...

439

Activities Designed to Recover the Taxpayers' Investment in the...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program, IG-0391 Activities Designed to Recover the Taxpayers' Investment in the Clean Coal Technology Program, IG-0391 Report on Audit of Activities Designed to Recover the...

440

Sandia Combustion Research Program  

DOE Green Energy (OSTI)

During the late 1970s, in response to a national energy crisis, Sandia proposed to the US Department of Energy (DOE) a new, ambitious program in combustion research. Shortly thereafter, the Combustion Research Facility (CRF) was established at Sandia's Livermore location. Designated a ''user facility,'' the charter of the CRF was to develop and maintain special-purpose resources to support a nationwide initiative-involving US inventories, industry, and national laboratories--to improve our understanding and control of combustion. This report includes descriptions several research projects which have been simulated by working groups and involve the on-site participation of industry scientists. DOE's Industry Technology Fellowship program, supported through the Office of Energy Research, has been instrumental in the success of some of these joint efforts. The remainder of this report presents results of calendar year 1988, separated thematically into eleven categories. Referred journal articles appearing in print during 1988 and selected other publications are included at the end of Section 11. Our traditional'' research activities--combustion chemistry, reacting flows, diagnostics, engine and coal combustion--have been supplemented by a new effort aimed at understanding combustion-related issues in the management of toxic and hazardous materials.

Johnston, S.C.; Palmer, R.E.; Montana, C.A. (eds.) [eds.

1988-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "response program design" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Our Programs | National Nuclear Security Administration  

NLE Websites -- All DOE Office Websites (Extended Search)

Programs | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our...

442

DOE O 475.1, Counterintelligence Program  

Directives, Delegations, and Requirements

The Order establishes Counterintelligence Program requirements and responsibilities for the Department of Energy, including the National Nuclear Security ...

2004-12-10T23:59:59.000Z

443

TFE Verification Program  

DOE Green Energy (OSTI)

The objective of the semiannual progress report is to summarize the technical results obtained during the latest reporting period. The information presented herein will include evaluated test data, design evaluations, the results of analyses and the significance of results. The program objective is to demonstrate the technology readiness of a TFE suitable for use as the basic element in a thermionic reactor with electric power output in the 0.5 to 5.0 MW(e) range, and a full-power life of 7 years. The TF Verification Program builds directly on the technology and data base developed in the 1960s and 1970s in an AEC/NASA program, and in the SP-100 program conducted in 1983, 1984 and 1985. In the SP-100 program, the attractive but concern was expressed over the lack of fast reactor irradiation data. The TFE Verification Program addresses this concern. The general logic and strategy of the program to achieve its objectives is shown on Fig. 1-1. Five prior programs form the basis for the TFE Verification Program: (1) AEC/NASA program of the 1960s and early 1970; (2) SP-100 concept development program;(3) SP-100 thermionic technology program; (4) Thermionic irradiations program in TRIGA in FY-86; (5) and Thermionic Technology Program in 1986 and 1987. 18 refs., 64 figs., 43 tabs.

Not Available

1990-03-01T23:59:59.000Z

444

Radioactive Materials Transportation and Incident Response  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FEMA 358, 0510 Q A RADIOACTIVE MATERIALS Transportation Emergency Preparedness Program U.S. Department of Energy TRANSPORTATION AND INCIDENT RESPONSE Q&A About Incident Response Q...

445

Management Programs  

NLE Websites -- All DOE Office Websites (Extended Search)

3MS Environment and Waste Management Programs Environment and Waste Management Programs Environment and Waste Management Programs AN L-934 Surveillance of Site A and Plot M...

446

Management Programs  

NLE Websites -- All DOE Office Websites (Extended Search)

Environment and Waste Management Programs Environment and Waste Management Programs Environment and Waste Management Programs AN L-9213 Surveillance of Site A and Plot M Report...

447

Management Programs  

NLE Websites -- All DOE Office Websites (Extended Search)

r Environment and Waste Management Programs Environment and Waste Management Programs Environment and Waste Management Programs ANL-949 Surveillance of Site A and Plot M Report...

448

Hawaii Energy Strategy: Program guide  

SciTech Connect

The Hawaii Energy Strategy program, or HES, is a set of seven projects which will produce an integrated energy strategy for the State of Hawaii. It will include a comprehensive energy vulnerability assessment with recommended courses of action to decrease Hawaii`s energy vulnerability and to better prepare for an effective response to any energy emergency or supply disruption. The seven projects are designed to increase understanding of Hawaii`s energy situation and to produce recommendations to achieve the State energy objectives of: Dependable, efficient, and economical state-wide energy systems capable of supporting the needs of the people, and increased energy self-sufficiency. The seven projects under the Hawaii Energy Strategy program include: Project 1: Develop Analytical Energy Forecasting Model for the State of Hawaii. Project 2: Fossil Energy Review and Analysis. Project 3: Renewable Energy Resource Assessment and Development Program. Project 4: Demand-Side Management Program. Project 5: Transportation Energy Strategy. Project 6: Energy Vulnerability Assessment Report and Contingency Planning. Project 7: Energy Strategy Integration and Evaluation System.

1992-09-01T23:59:59.000Z

449

Comment and response document for the final remedial action plan site design for stabilization of the Inactive Uranium Mill Tailings Sites at Slick Rock, Colorado  

Science Conference Proceedings (OSTI)

This document consists of comments and responses; the reviewers are the U.S. Nuclear Regulatory Commission (NRC), Colorado Dept. of Public Health and Environment, and the remedial action contractor (RAC).

NONE

1995-09-01T23:59:59.000Z

450

Enterprise Zone Program (Illinois)  

Energy.gov (U.S. Department of Energy (DOE))

The Enterprise Zone Program provides eligible businesses that relocate or expand to a designated zone with tax incentives such as: 1) an investment tax credit; 2) a job tax credit for each job...

451

Space Solar Power Program  

DOE Green Energy (OSTI)

Information pertaining to the Space Solar Power Program is presented on energy analysis; markets; overall development plan; organizational plan; environmental and safety issues; power systems; space transportation; space manufacturing, construction, operations; design examples; and finance.

Arif, H.; Barbosa, H.; Bardet, C.; Baroud, M.; Behar, A.; Berrier, K.; Berthe, P.; Bertrand, R.; Bibyk, I.; Bisson, J.; Bloch, L.; Bobadilla, G.; Bourque, D.; Bush, L.; Carandang, R.; Chiku, T.; Crosby, N.; De Seixas, M.; De Vries, J.; Doll, S.; Dufour, F.; Eckart, P.; Fahey, M.; Fenot, F.; Foeckersperger, S.; Fontaine, J.E.; Fowler, R.; Frey, H.; Fujio, H.; Gasa, J.M.; Gleave, J.; Godoe, J.; Green, I.; Haeberli, R.; Hanada, T.; Ha

1992-08-01T23:59:59.000Z

452

Honors Attorney Program  

Energy.gov (U.S. Department of Energy (DOE))

The Department of Energy’s Honors Attorney Program is designed to recruit highly-qualified law school graduates (and recent law graduates completing judicial clerkships or fellowships) and offers...

453

DOE Hydropower Program Annual Report for FY 2002  

SciTech Connect

The U.S. Department of Energy (DOE) conducts research on advanced hydropower technology through its hydropower program, which is organized under the Office of Wind and Hydropower Technologies within the Office of Energy Efficiency and Renewable Energy. This annual report describes the various projects supported by the hydropower program in FY 2002. The program=s current focus is on improving the environmental performance of hydropower projects by addressing problems such as fish mortality during passage through turbines, alteration of instream habitat, and water quality in tailwaters. A primary goal of this research is to develop new, environmentally friendly technology. DOE-funded projects have produced new conceptual designs for turbine systems, and these are now being tested in pilot-scale laboratory tests and in the field. New design approaches range from totally new turbine runners to modifications of existing designs. Biological design criteria for these new turbines have also been developed in controlled laboratory tests of fish response to physical stresses, such as hydraulic shear and pressure changes. These biocriteria are being combined with computational tools to locate and eliminate areas inside turbine systems that are damaging to fish. Through the combination of laboratory, field, and computational studies, new solutions are being found to environmental problems at hydropower projects. The diverse program activities continue to make unique contributions to clean energy production in the U.S. By working toward technology improvements that can reduce environmental problems, the program is helping to reposition hydropower as an acceptable, renewable, domestic energy choice.

Garold L. Sommers; R. T. Hunt

2003-07-01T23:59:59.000Z

454

Equipment qualification research program: program plan  

Science Conference Proceedings (OSTI)

The Lawrence Livermore National Laboratory (LLNL) under the sponsorship of the US Nuclear Regulatory Commission (NRC) has developed this program plan for research in equipment qualification (EQA). In this report the research program which will be executed in accordance with this plan will be referred to as the Equipment Qualification Research Program (EQRP). Covered are electrical and mechanical equipment under the conditions described in the OBJECTIVE section of this report. The EQRP has two phases; Phase I is primarily to produce early results and to develop information for Phase II. Phase I will last 18 months and consists of six projects. The first project is program management. The second project is responsible for in-depth evaluation and review of EQ issues and EQ processes. The third project is responsible for detailed planning to initiate Phase II. The remaining three projects address specific equipment; i.e., valves, electrical equipment, and a pump.

Dong, R.G.; Smith, P.D.

1982-06-08T23:59:59.000Z

455

Federal Energy Management Program: About the Program  

NLE Websites -- All DOE Office Websites (Extended Search)

About the Program About the Program The U.S. Department of Energy's Federal Energy Management Program (FEMP) works with key individuals to accomplish energy change within organizations, by bringing expertise from all levels of project and policy implementation, to enable Federal agencies to meet energy-related goals and provide energy leadership to the country. As the nation's largest energy consumer, the Federal Government has a tremendous opportunity and clear responsibility to lead by example. FEMP is central to this responsibility, guiding agencies to use funding more effectively in meeting Federal and agency-specific energy management objectives. Directed by Dr. Timothy Unruh, FEMP helps agencies meet its objectives by providing information through its primary program, technology, and service areas.

456

Clean air program: Design guidelines for bus transit systems using alcohol fuel (methanol and ethanol) as an alternative fuel. Final report, July 1995-April 1996  

Science Conference Proceedings (OSTI)

This report provides design guidelines for the safe use of alcohol fuel (Methanol or Ethanol). It is part of a series of individual monographs being published by the FTA providing guidelines for the safe use of Compressed Natural Gas (CNG), Liquefied Natural Gas (LNG), Liquefied Petroleum Gas (LPG) and alcohol fuels (Methanol and Ethanol). Each report in this series describes, for the subject fuel, the important fuel properties, guidelines for the design and operation of bus fueling, storage and maintenance facilities, issues on personnel training and emergency preparedness.

Raj, P.K.; DeMarco, V.R.; Hathaway, W.T.; Kangas, R.

1996-08-01T23:59:59.000Z

457

Fossil Energy Materials Program conference proceedings  

Science Conference Proceedings (OSTI)

The US Department of Energy Office of Fossil Energy has recognized the need for materials research and development to assure the adequacy of materials of construction for advanced fossil energy systems. The principal responsibility for identifying needed materials research and for establishing a program to address these needs resides within the Office of Technical Coordination. That office has established the Advanced Research and Technology Development (AR and TD) Fossil Energy Materials Program to fulfill that responsibility. In addition to the AR and TD Materials Program, which is designed to address in a generic way the materials needs of fossil energy systems, specific materials support activities are also sponsored by the various line organizations such as the Office of Coal Gasification. A conference was held at Oak Ridge, Tennessee on May 19-21, 1987, to present and discuss the results of program activities during the past year. The conference program was organized in accordance with the research thrust areas we have established. These research thrust areas include structural ceramics (particularly fiber-reinforced ceramic composites), corrosion and erosion, and alloy development and mechanical properties. Eighty-six people attended the conference. Papers have been entered individually into EDB and ERA. (LTN)

Judkins, R.R. (comp.)

1987-08-01T23:59:59.000Z

458

Energy efficiency programs for niche markets: The Labs21 program as an exemplar  

E-Print Network (OSTI)

Energy Efficiency Programs for Niche Markets: The Labs21programs that promote energy efficiency and environmentalattention of the energy efficiency and sustainable design

Wirdzek, Phillip; Lintner, William; Mathew, Paul; Carlisle, Nancy

2004-01-01T23:59:59.000Z

459

PowerChoice Residential Customer Response to TOU Rates  

E-Print Network (OSTI)

TOU) Pricing and Demand- Response (DR) Programs. Washington,Earle. 2006. “Demand Response and Advanced Metering. ”on Residential Demand Response. ” May 11. Discussion Paper.

Peters, Jane S.

2010-01-01T23:59:59.000Z