Powered by Deep Web Technologies
Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Building Technologies Office: Residential Buildings Energy Efficiency...  

NLE Websites -- All DOE Office Websites (Extended Search)

Buildings Energy Efficiency Meeting The U.S. Department of Energy (DOE) Building America program held the Residential Buildings Energy Efficiency Meeting in Denver, Colorado, on...

2

Building Technologies Office: Residential Buildings Energy Efficiency...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency Meeting to someone by E-mail Share Building Technologies Office: Residential Buildings Energy Efficiency Meeting on Facebook Tweet about Building Technologies...

3

Better Buildings Neighborhood Program: Residential Energy Efficiency  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential Residential Energy Efficiency Solutions: From Innovation to Market Transformation Conference, July 2012 to someone by E-mail Share Better Buildings Neighborhood Program: Residential Energy Efficiency Solutions: From Innovation to Market Transformation Conference, July 2012 on Facebook Tweet about Better Buildings Neighborhood Program: Residential Energy Efficiency Solutions: From Innovation to Market Transformation Conference, July 2012 on Twitter Bookmark Better Buildings Neighborhood Program: Residential Energy Efficiency Solutions: From Innovation to Market Transformation Conference, July 2012 on Google Bookmark Better Buildings Neighborhood Program: Residential Energy Efficiency Solutions: From Innovation to Market Transformation Conference, July 2012 on Delicious

4

Building Technologies Office: Residential Energy Efficiency Stakeholde...  

NLE Websites -- All DOE Office Websites (Extended Search)

Webinars Building America Residential Research Better Buildings Alliance Solid-State Lighting Events DOE Challenge Home Zero Net-Energy-Ready Home Training September 23, 2013 EEBA...

5

Building Technologies Office: Residential Energy Efficiency Stakeholde...  

NLE Websites -- All DOE Office Websites (Extended Search)

to someone by E-mail Share Building Technologies Office: Residential Energy Efficiency Stakeholder's Meeting - Spring 2011 on Facebook Tweet about Building Technologies Office:...

6

Building Technologies Office: Residential Energy Efficiency Technical...  

NLE Websites -- All DOE Office Websites (Extended Search)

to someone by E-mail Share Building Technologies Office: Residential Energy Efficiency Technical Update Meeting - Summer 2011 on Facebook Tweet about Building Technologies Office:...

7

Building Technologies Office: Residential Energy Efficiency Stakeholde...  

NLE Websites -- All DOE Office Websites (Extended Search)

Stakeholder's Meeting - Spring 2011 The U.S. Department of Energy (DOE) Building America program held the Residential Energy Efficiency Stakeholder's Meeting in Atlanta, Georgia,...

8

Building Technologies Office: Residential Energy Efficiency Technical...  

NLE Websites -- All DOE Office Websites (Extended Search)

Technical Update Meeting - Summer 2011 The U.S. Department of Energy (DOE) Building America program held the Residential Energy Efficiency Technical Update Meeting in Denver,...

9

Green Residential Building Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

on a wait list, and will be notified if additional funding becomes available.''''' The Green Residential Building Program, administered by the New York State Energy Research and...

10

Residential Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Apartment building exterior and interior Apartment building exterior and interior Residential Buildings EETD's research in residential buildings addresses problems associated with whole-building integration involving modeling, measurement, design, and operation. Areas of research include the movement of air and associated penalties involving distribution of pollutants, energy and fresh air. Contacts Max Sherman MHSherman@lbl.gov (510) 486-4022 Iain Walker ISWalker@lbl.gov (510) 486-4692 Links Residential Building Systems Group Batteries and Fuel Cells Buildings Energy Efficiency Applications Commercial Buildings Cool Roofs and Heat Islands Demand Response Energy Efficiency Program and Market Trends High Technology and Industrial Systems Lighting Systems Residential Buildings Simulation Tools Sustainable Federal Operations

11

Building Technologies Office: Building America Residential Energy...  

NLE Websites -- All DOE Office Websites (Extended Search)

research results to the market. Learn more about the research planning process. Read the Residential Energy Efficiency Research Planning Meeting Summary Report and view the...

12

Residential Building Renovations | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Building Renovations Residential Building Renovations Residential Building Renovations October 16, 2013 - 4:57pm Addthis Renewable Energy Options Residential Building Renovations Photovoltaics Daylighting Solar Water Heating Geothermal Heat Pumps (GHP) Biomass Heating In some circumstances, Federal agencies may face construction or renovation of residential units, whether single-family, multi-family, barracks, or prisons. Based on typical domestic energy needs, solar water heating and photovoltaic systems are both options, depending on the cost of offset utilities. These systems can be centralized for multi-family housing to improve system economics. Daylighting can reduce energy costs and increase livability of units. Geothermal heat pumps (GHP) are a particularly cost-effective option in

13

Building Technologies Office: Residential Energy Efficiency Stakeholder  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency Stakeholder Meeting - Spring 2012 Energy Efficiency Stakeholder Meeting - Spring 2012 The U.S. Department of Energy (DOE) Building America program held the second annual Residential Energy Efficiency Stakeholder Meeting on February 29-March 2, 2012, in Austin, Texas. At this meeting, hundreds of building industry professionals came together to share their perspective on the most current innovation projects in the residential buildings sector. This meeting provided an opportunity for researchers and industry stakeholders to showcase and discuss the latest in cutting-edge, energy-efficient residential building technologies and practices. The meeting also included working sessions from each Standing Technical Committee (STC), which outlined work that will best assist in overcoming technical challenges and delivering Building America research results to the market. Learn more about the STCs and the research planning process.

14

Building Technologies Office: Residential Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential Buildings Residential Buildings to someone by E-mail Share Building Technologies Office: Residential Buildings on Facebook Tweet about Building Technologies Office: Residential Buildings on Twitter Bookmark Building Technologies Office: Residential Buildings on Google Bookmark Building Technologies Office: Residential Buildings on Delicious Rank Building Technologies Office: Residential Buildings on Digg Find More places to share Building Technologies Office: Residential Buildings on AddThis.com... About Take Action to Save Energy Partner With DOE Activities Technology Research, Standards, & Codes Popular Residential Links Success Stories Previous Next Warming Up to Pump Heat. Lighten Energy Loads with System Design. Cut Refrigerator Energy Use to Save Money. Tools EnergyPlus Whole Building Simulation Program

15

An energy standard for residential buildings in south China  

E-Print Network (OSTI)

Abstract: residential, buildings, energy standard, energyspiraling demand for building energy use, China’s Ministryand implementing building energy standards, starting with a

Huang, Yu Joe; Lang, Siwei; Hogan, John; Lin, Haiyan

2003-01-01T23:59:59.000Z

16

Residential Buildings  

U.S. Energy Information Administration (EIA) Indexed Site

Residential Residential Residential Buildings Residential buildings-such as single family homes, townhomes, condominiums, and apartment buildings-are all covered by the Residential Energy Consumption Survey (RECS). See the RECS home page for further information. However, buildings that offer multiple accomodations such as hotels, motels, inns, dormitories, fraternities, sororities, convents, monasteries, and nursing homes, residential care facilities are considered commercial buildings and are categorized in the CBECS as lodging. Specific questions may be directed to: Joelle Michaels joelle.michaels@eia.doe.gov CBECS Manager Release date: January 21, 2003 Page last modified: May 5, 2009 10:18 AM http://www.eia.gov/consumption/commercial/data/archive/cbecs/pba99/residential.html

17

Residential Code Development | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential Code Development Subscribe to updates To receive news and updates about code development activities subscribe to the BECP Mailing List. The model residential building...

18

Improving the Energy Efficiency of Residential Buildings | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Buildings Residential Buildings Improving the Energy Efficiency of Residential Buildings Visitors Tour Solar Decathlon Homes Featuring the Latest in Energy Efficient Building Technology. Learn More Visitors Tour Solar Decathlon Homes Featuring the Latest in Energy Efficient Building Technology. Learn More The Building Technologies Office (BTO) collaborates with the residential building industry to improve the energy efficiency of both new and existing homes. By developing, demonstrating, and deploying cost-effective solutions, BTO strives to reduce energy consumption across the residential building sector by at least 50%. Research and Development Conduct research that focuses on engineering solutions to design, test, and

19

Better Buildings Neighborhood Program: What's Working in Residential Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

What's Working What's Working in Residential Energy Efficiency Upgrade Programs Workshop, May 2011 to someone by E-mail Share Better Buildings Neighborhood Program: What's Working in Residential Energy Efficiency Upgrade Programs Workshop, May 2011 on Facebook Tweet about Better Buildings Neighborhood Program: What's Working in Residential Energy Efficiency Upgrade Programs Workshop, May 2011 on Twitter Bookmark Better Buildings Neighborhood Program: What's Working in Residential Energy Efficiency Upgrade Programs Workshop, May 2011 on Google Bookmark Better Buildings Neighborhood Program: What's Working in Residential Energy Efficiency Upgrade Programs Workshop, May 2011 on Delicious Rank Better Buildings Neighborhood Program: What's Working in Residential Energy Efficiency Upgrade Programs Workshop, May 2011 on Digg

20

Design for Energy Efficiency in Residential Buildings  

E-Print Network (OSTI)

This paper presents the thermal design and heating design of an energy saving residential building in Beijing where the owners lived until 2004. Results show the advantages and disadvantages of a household-based heating mode by natural gas. Based on the quantity of natural gas by field tests in 2005, we conclude that thermal design influences heating design calculations.

Song, M.; Zhang, Y.; Yang, G.

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Evaluating Residential Buildings for Statewide Compliance | Building Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential Buildings for Statewide Compliance Residential Buildings for Statewide Compliance The materials for this course may be used for in-person training courses, and are intended to provide the tools and specific training necessary to evaluate residential compliance with the 2009 International Energy Conservation Code (IECC). The course also provides useful training in general residential field inspection for energy code compliance. The recommended background for taking this course is significant experience and/or certification on the IECC in a plan review or inspection capacity. Presenters: Course materials originally published by the DOE Building Energy Codes Program, July 16, 2010. Course Type: Training Materials Video In-person Downloads: Presentation Slides Presentation Slides Presentation Slides and Windows Media Videos

22

Residential Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Exterior and interior of apartment building Exterior and interior of apartment building Residential Buildings The study of ventilation in residential buildings is aimed at understanding the role that air leakage, infiltration, mechanical ventilation, natural ventilation and building use have on providing acceptable indoor air quality so that energy and related costs can be minimized without negatively impacting indoor air quality. Risks to human health and safety caused by inappropriate changes to ventilation and air tightness can be a major barrier to achieving high performance buildings and must be considered.This research area focuses primarily on residential and other small buildings where the interaction of the envelope is important and energy costs are dominated by space conditioning energy rather than air

23

Impact of improved building thermal efficiency on residential energy demand  

SciTech Connect

The impact of improved building shell thermal efficiency on residential energy demand is explored in a theoretical framework. The important economic literature on estimating the price elasticity of residential energy demand is reviewed. The specification of the residential energy demand model is presented. The data used are described. The empirical estimation of the residential energy demand model is described. (MHR)

Adams, R.C.; Rockwood, A.D.

1983-04-01T23:59:59.000Z

24

Current Status and Future Scenarios of Residential Building Energy Consumption in China  

E-Print Network (OSTI)

Residential Energy Consumption Survey, Human and Socialof Residential Building Energy Consumption in China Nan ZhouResidential Building Energy Consumption in China Nan Zhou*,

Zhou, Nan

2010-01-01T23:59:59.000Z

25

Current Status and Future Scenarios of Residential Building Energy Consumption in China  

E-Print Network (OSTI)

The China Residential Energy Consumption Survey, Human andof Residential Building Energy Consumption in China Nan ZhouResidential Building Energy Consumption in China Nan Zhou*,

Zhou, Nan

2010-01-01T23:59:59.000Z

26

Residential Building Industry Consulting Services | Open Energy Information  

Open Energy Info (EERE)

Residential Building Industry Consulting Services Residential Building Industry Consulting Services Jump to: navigation, search Name Residential Building Industry Consulting Services Place New York, NY Information About Partnership with NREL Partnership with NREL Yes Partnership Type Test & Evaluation Partner Partnering Center within NREL Electricity Resources & Building Systems Integration LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! Residential Building Industry Consulting Services is a company located in New York, NY. References Retrieved from "http://en.openei.org/w/index.php?title=Residential_Building_Industry_Consulting_Services&oldid=381757" Categories: Clean Energy Organizations Companies Organizations What links here Related changes Special pages

27

Partner With DOE and Residential Buildings | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Buildings » Partner With DOE and Residential Buildings Residential Buildings » Partner With DOE and Residential Buildings Partner With DOE and Residential Buildings The U.S. Department of Energy (DOE) partners with a variety of organizations to improve the energy efficiency of residential buildings. Home builders, governments, researchers, and universities have several opportunities to work with the Building Technologies Office and other DOE projects. Home Builders Home builders who want to be recognized for building high performance homes can find out what it takes to participate in DOE's Challenge Home and sign up today. DOE Challenge Homes are verified by a qualified third-party and are at least 40%-50% more energy efficient than a typical new home. State or Local Governments, Utilities, and Other Organizations

28

Residential Prototype Building Models | Building Energy Codes...  

NLE Websites -- All DOE Office Websites (Extended Search)

the 2006, 2009, and 2012 editions of the IECC are listed in Table 1. Each compressed (.zip) file includes EnergyPlus model input files (.idf) and corresponding output files...

29

Building Technologies Office: Residential Building Activities  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential Building Residential Building Activities to someone by E-mail Share Building Technologies Office: Residential Building Activities on Facebook Tweet about Building Technologies Office: Residential Building Activities on Twitter Bookmark Building Technologies Office: Residential Building Activities on Google Bookmark Building Technologies Office: Residential Building Activities on Delicious Rank Building Technologies Office: Residential Building Activities on Digg Find More places to share Building Technologies Office: Residential Building Activities on AddThis.com... About Take Action to Save Energy Partner With DOE Activities Solar Decathlon Building America Home Energy Score Home Performance with ENERGY STAR Better Buildings Neighborhood Program Challenge Home Guidelines for Home Energy Professionals

30

Residential Code Methodology | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

& Offices Consumer Information Building Energy Codes Search Search Search Help Building Energy Codes Program Home News Events About DOE EERE BTO BECP Site Map...

31

Building energy calculator : a design tool for energy analysis of residential buildings in Developing countries  

E-Print Network (OSTI)

Buildings are one of the world's largest consumers of energy, yet measures to reduce energy consumption are often ignored during the building design process. In developing countries, enormous numbers of new residential ...

Smith, Jonathan Y. (Jonathan York), 1979-

2004-01-01T23:59:59.000Z

32

Building Technologies Office: About Residential Building Programs  

NLE Websites -- All DOE Office Websites (Extended Search)

About Residential About Residential Building Programs to someone by E-mail Share Building Technologies Office: About Residential Building Programs on Facebook Tweet about Building Technologies Office: About Residential Building Programs on Twitter Bookmark Building Technologies Office: About Residential Building Programs on Google Bookmark Building Technologies Office: About Residential Building Programs on Delicious Rank Building Technologies Office: About Residential Building Programs on Digg Find More places to share Building Technologies Office: About Residential Building Programs on AddThis.com... About Take Action to Save Energy Partner With DOE Activities Technology Research, Standards, & Codes Popular Residential Links Success Stories Previous Next Warming Up to Pump Heat.

33

Energy Use and Indoor Thermal Environment of Residential Buildings...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Use and Indoor Thermal Environment of Residential Buildings in China Speaker(s): Hiroshi Yoshino Date: December 16, 2003 - 12:00pm Location: 90-3122 The first part of this...

34

Tax Incentives for Residential Buildings | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Buildings Residential Buildings Tax Incentives for Residential Buildings On this page you'll find information about the tax deductions available for purchasing and installing energy-efficient products and constructing new energy-efficient homes. The American Recovery and Reinvestment Act of 2009 offers tax credits for residential energy efficiency measures and renewable energy systems. Many of these credits were originally introduced in the Energy Policy Act of 2005 (EPACT) and amended in the Emergency Economic Stabilization Act of 2008 (P.L. 110-343). Energy Efficiency Tax Credits for Existing Homes Homeowners are eligible for a tax credit of 30% of the cost for improvements to windows, roofing, insulation, and heating and cooling equipment. These improvements must be placed in service from January 1,

35

Regulations establishing energy-conservation standards for new residential buildings  

SciTech Connect

The text of the California Administrative Code, Title 24, Part 6, Article 1 is presented. The energy conservation standards described apply to all new hotels, motels, apartment houses, lodging houses, dwellings, and other residential buildings which are heated or mechanically cooled. Standards for the building envelope, climate control systems and equipment, and water heating are included. (MCW)

Not Available

1980-02-01T23:59:59.000Z

36

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book (EERE)

Residential Building Component Loads as of 1998 (1) 1) "Load" represents the thermal energy lossesgains that when combined will be offset by a building's heatingcooling system...

37

Investigation and Analysis of Summer Energy Consumption of Energy Efficient Residential Buildings in Xi'an  

E-Print Network (OSTI)

Tests and questionnaire surveys on the summer energy consumption structure of 100 energy efficient residential buildings have been performed in a certain residential district in Xi'an, China. The relationship between the formation of the energy consumption structure and building conditions, living customs, family income, and thermal environment, as well as local climatic conditions, etc., is analyzed. Measures to optimize the energy utilization consumption are proposed, and further improvements to the energy efficiency of current residential buildings is also discussed.

Ma, B.; Yan, Z.; Gui, Z.; He, J.

2006-01-01T23:59:59.000Z

38

Membership Criteria: Better Buildings Residential network  

NLE Websites -- All DOE Office Websites (Extended Search)

Criteria BETTER BUILDINGS RESIDENTIAL NETWORK Learn more at betterbuildings.energy.govbbrn Better Buildings Residential Network (BBRN) members must be supportive of residential...

39

Assessing and Improving the Accuracy of Energy Analysis for Residential Buildings  

SciTech Connect

This report describes the National Renewable Energy Laboratory's (NREL) methodology to assess and improve the accuracy of whole-building energy analysis for residential buildings.

Polly, B.; Kruis, N.; Roberts, D.

2011-07-01T23:59:59.000Z

40

Assessing and Improving the Accuracy of Energy Analysis for Residential Buildings  

SciTech Connect

This report describes the National Renewable Energy Laboratory's (NREL) methodology to assess and improve the accuracy of whole-building energy analysis for residential buildings.

Polly, B.; Kruis, N.; Roberts, D.

2011-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Residential Buildings Integration Program  

NLE Websites -- All DOE Office Websites (Extended Search)

David Lee David Lee Program Manager David.Lee@ee.doe.gov 202-287-1785 April 2, 2013 Residential Buildings Integration Program Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov Sub-Programs for Review Better Buildings Neighborhood Program Building America Challenge Home Home Energy Score Home Performance with ENERGY STAR Solar Decathlon 3 | Building Technologies Office eere.energy.gov How Residential Buildings Fits into BTO Research & Development * Develop technology roadmaps * Prioritize opportunities * Solicit and select innovative technology solutions * Collaborate with researchers

42

Residential Buildings Integration Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

David Lee David Lee Program Manager David.Lee@ee.doe.gov 202-287-1785 April 2, 2013 Residential Buildings Integration Program Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov Sub-Programs for Review Better Buildings Neighborhood Program Building America Challenge Home Home Energy Score Home Performance with ENERGY STAR Solar Decathlon 3 | Building Technologies Office eere.energy.gov How Residential Buildings Fits into BTO Research & Development * Develop technology roadmaps * Prioritize opportunities * Solicit and select innovative technology solutions * Collaborate with researchers

43

Sustainability Assessment of Residential Building Energy System in Belgrade  

E-Print Network (OSTI)

As a metropolitan city, Belgrade is a dwelling place for about 25% of total citizen number of Republic of Serbia, and at the same time regional cultural, educational, scientific and business center with its own energy production. Belgrade represents a significant consumer of final energy to support the living standard of the occupants. Energy production is based on domestic coal and imported fossil fuels such as oil and natural gas resulting in a high impact to the environment by emission of harmful substances. Multi-criteria method is a basic tool for the sustainability assessment in metropolitan cities. The design of potential options is the first step in the evaluation of buildings. The selection of a number of residential buildings is based on geographic position and type of heating. This paper presents the sustainable assessment of energy system for residential building sector in Belgrade. In order to present the energy system options for residential building sector, three sets of energy indicators: economical, social and environmental are taken into consideration.

Vucicevic, B.; Bakic, V.; Jovanovic, M.; Turanjanin, V.

2010-01-01T23:59:59.000Z

44

An energy standard for residential buildings in south China  

SciTech Connect

To curb the spiraling demand for building energy use, China's Ministry of Construction has worked at developing and implementing building energy standards, starting with a standard for heated residential buildings in the Cold regions in 1986, followed by a standard for residential buildings in the Hot Summer Cold Winter Region in central China in 2001. In July 2001, a similar effort was started to develop a standard for residential buildings in the Hot Summer Warm Winter Region, comprising of the entirety or large portions of Guangdong, Guangxi, Hainan and Fujian. The target for the standard is to improve the thermal efficiency of buildings by 50 percent compared to current construction, which are typically uninsulated and have single-pane windows. Because of the importance of controlling window solar gain, the standard developed tables specifying the required window thermal transmittance and shading coefficient for differing window-to-wall ratios. The intent of such trade-off table is to permit flexibility in the location and size of windows, as long as their thermal performances meet the requirements of the standard. For further flexibility, the standard provides three methods of compliance: (1) a simple set of prescriptive requirements, (2) a simplified performance calculation, and (3) a detailed computer-based performance calculation using a Custom Budget approach.

Huang, Yu Joe; Lang, Siwei; Hogan, John; Lin, Haiyan

2003-07-01T23:59:59.000Z

45

Window-Related Energy Consumption in the US Residential and Commercial Building Stock  

E-Print Network (OSTI)

2001). "Residential Energy Consumption Survey." 2006, fromCommercial Building Energy Consumption Survey." from http://Scale window-related energy consumption to account for new

Apte, Joshua; Arasteh, Dariush

2008-01-01T23:59:59.000Z

46

Building Technologies Office: Residential Energy Efficiency Stakeholde...  

NLE Websites -- All DOE Office Websites (Extended Search)

Track C - Market-Driven Research Solutions Standing Technical Committee Working Sessions Space Conditioning STC Home Energy Management STC Hot Water STC Enclosures STC...

47

AB 758 COMPREHENSIVE ENERGY EFFICIENCY PROGRAM FOR EXISTING RESIDENTIAL AND NONRESIDENTIAL BUILDINGS  

E-Print Network (OSTI)

1 AB 758 COMPREHENSIVE ENERGY EFFICIENCY PROGRAM FOR EXISTING RESIDENTIAL AND NONRESIDENTIAL homes energy efficient through Title 24 Part 6 Building Energy Efficiency Standards (Standards for Energy Efficiency in Existing Buildings (AB 549 Report), the Energy Commission made a series

48

Residential Building Code Compliance  

NLE Websites -- All DOE Office Websites (Extended Search)

6 6 Residential Building Code Compliance: Recent Findings and Implications Energy use in residential buildings in the U.S. is significant-about 20% of primary energy use. While several approaches reduce energy use such as appliance standards and utility programs, enforcing state building energy codes is one of the most promising. However, one of the challenges is to understand the rate of compliance within the building community. Utility companies typically use these codes as the baseline for providing incentives to builders participating in utility-sponsored residential new construction (RNC) programs. However, because builders may construct homes that fail to meet energy codes, energy use in the actual baseline is higher than would be expected if all buildings complied with the code. Also,

49

Potential for energy technologies in residential and commercial buildings  

SciTech Connect

The residential-commercial energy technology model was developed as a planning tool for policy analysis in the residential and commercial building sectors. The model and its procedures represent a detailed approach to estimating the future acceptance of energy-using technologies both in new construction and for retrofit into existing buildings. The model organizes into an analytical framework all relevant information and data on building energy technology, building markets, and government policy, and it allows for easy identification of the relative importance of key assumptions. The outputs include estimates of the degree of penetration of the various building energy technologies, the levels of energy use savings associated with them, and their costs - both private and government. The model was designed to estimate the annual energy savings associated with new technologies compared with continued use of conventional technology at 1975 levels. The amount of energy used under 1975 technology conditions is referred to as the reference case energy use. For analytical purposes the technologies were consolidated into ten groupings: electric and gas heat pumps; conservation categories I, II, and III; solar thermal (hot water, heating, and cooling); photovoltaics, and wind systems. These groupings clearly do not allow an assessment of the potential for individual technologies, but they do allow a reasonable comparison of their roles in the R/C sector. Assumptions were made regarding the technical and economic performances of the technologies over the period of the analysis. In addition, the study assessed the non-financial characteristics of the technologies - aesthetics, maintenance complexity, reliability, etc. - that will also influence their market acceptability.

Glesk, M.M.

1979-11-01T23:59:59.000Z

50

Residential Requirements of the 2009 IECC | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

09 IECC 09 IECC This training includes an overview of the residential requirements of the 2009 International Energy Conservation Code. Estimated Length: 1 hour, 9 minutes Presenters: Todd Taylor, Pacific Northwest National Laboratory Original Webcast Date: Tuesday, June 16, 2009 - 13:00 CEUs Offered: 1.0 AIA/CES LU (HSW); .10 CEUs towards ICC renewal certification. Course Type: Video Downloads: Video Transcript Presentation Slides Video Watch on YouTube Visit the BECP Online Training Center for instructions on how to obtain a certificate of completion. Building Type: Residential Focus: Compliance Code Version: 2009 IECC Target Audience: Architect/Designer Builder Code Official Contractor Engineer Federal Official State Official Contacts Web Site Policies U.S. Department of Energy

51

Window-Related Energy Consumption in the US Residential and Commercial Building Stock  

E-Print Network (OSTI)

2001). "Residential Energy Consumption Survey." 2006, fromCommercial Building Energy Consumption Survey." from http://Study: Window % of Consumption 1. Categorize component loads

Apte, Joshua; Arasteh, Dariush

2008-01-01T23:59:59.000Z

52

Buildings Energy Data Book: 2.6 Residential Home Improvement  

Buildings Energy Data Book (EERE)

1 1 Value of Residential Building Improvements and Repairs, by Sector ($2010 Billion) (1) Total 1980 72.2 35.2 107.4 1985 82.3 65.3 147.6 1990 91.4 85.5 176.9 1995 105.8 63.8 169.6 2000 138.2 52.7 191.0 2003 156.2 51.9 208.0 2004 169.2 57.9 227.1 2005 179.0 59.7 238.6 2006 187.4 57.2 244.6 2007 (2) 178.7 57.0 235.7 Note(s): Source(s): Improvements Maintenance and Repairs 1) Improvements includes additions, alterations, reconstruction, and major replacements. Repairs include maintenance. 2) The US Census Bureau discontinued the Survey of Residential Alterations and Repairs (SORAR) after 2007. DOC, Historic Expenditures for Residential Properties by Property Type: Quarterly 1962-2003 (Old structural purposes) for 1980-2000; DOC, Historic Expenditures for Residential Proerties by Property Type: Quarterly 2003-2007 (New structural purposes) for 1995-2007; and EIA, Annual Energy Review

53

Energy Efficiency Standards for New Federal Low-Rise Residential Buildings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Standards for New Federal Low-Rise Residential Standards for New Federal Low-Rise Residential Buildings Energy Efficiency Standards for New Federal Low-Rise Residential Buildings October 8, 2013 - 1:57pm Addthis DOE recently updated the requirements for energy efficiency in newly constructed federal buildings. The new rule, 10 CFR 435, Subpart A: Energy Efficiency Standards for New Federal Low-Rise Residential Buildings, applies to residential buildings (one- and two-family dwellings as well as multifamily buildings three stories or less in height) for which design for construction began on or after August 10, 2012. The rule updates the baseline standard in 10 CFR 435, Subpart A to the 2009 IECC. New federal residential buildings are required (effective August 10, 2012) to achieve the 2009 IECC level of energy efficiency or 30% greater

54

Infiltration and Natural Ventilation Model for Whole-Building Energy Simulation of Residential Buildings: Preprint  

DOE Green Energy (OSTI)

The infiltration term in the building energy balance equation is one of the least understood and most difficult to model. For many residential buildings, which have an energy performance dominated by the envelope, it can be one of the most important terms. There are numerous airflow models; however, these are not combined with whole-building energy simulation programs that are in common use in North America. This paper describes a simple multizone nodal airflow model integrated with the SUNREL whole-building energy simulation program.

Deru, M.; Burns, P.

2003-03-01T23:59:59.000Z

55

Building and occupant characteristics as determinants of residential energy consumption  

Science Conference Proceedings (OSTI)

The major goals of the research are to gain insight into the probable effects of building energy performance standards on energy consumption; to obtain observations of actual residential energy consumption that could affirm or disaffirm comsumption estimates of the DOE 2.0A simulation model; and to investigate home owner's conservation investments and home purchase decisions. The first chapter covers the investigation of determinants of household energy consumption. The presentation begins with the underlying economic theory and its implications, and continues with a description of the data collection procedures, the formulation of variables, and then of data analysis and findings. In the second chapter the assumptions and limitations of the energy use projections generated by the DOE 2.0A model are discussed. Actual electricity data for the houses are then compared with results of the simulation.

Nieves, L.A.; Nieves, A.L.

1981-10-01T23:59:59.000Z

56

Building Technologies Office: Partner With DOE and Residential Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Partner With DOE and Partner With DOE and Residential Buildings to someone by E-mail Share Building Technologies Office: Partner With DOE and Residential Buildings on Facebook Tweet about Building Technologies Office: Partner With DOE and Residential Buildings on Twitter Bookmark Building Technologies Office: Partner With DOE and Residential Buildings on Google Bookmark Building Technologies Office: Partner With DOE and Residential Buildings on Delicious Rank Building Technologies Office: Partner With DOE and Residential Buildings on Digg Find More places to share Building Technologies Office: Partner With DOE and Residential Buildings on AddThis.com... About Take Action to Save Energy Partner With DOE Activities Technology Research, Standards, & Codes Popular Residential Links

57

Discussion on Energy-Efficient Technology for the Reconstruction of Residential Buildings in Cold Areas  

E-Print Network (OSTI)

: Based on the existing residential buildings in cold areas, this paper takes the existing residential buildings in a certain district in Beijing to provide an analysis of the thermal characteristics of envelope and energy consumption in winter with the software PKPM, and provides the technical and economic analysis, which may provide reference for suitable plans for energy efficient reconstruction of buildings in cold areas.

Zhao, J.; Wang, S.; Chen, H.; Shi, Y.; Li, D.

2006-01-01T23:59:59.000Z

58

Green Residential Building Program (New York) | Open Energy Informatio...  

Open Energy Info (EERE)

with form History Share this page on Facebook icon Twitter icon Green Residential Building Program (New York) This is the approved revision of this page, as well as being...

59

Simulering av energieffektiviserande ĺtgärder för smĺ- och flerbostadshus; Simulation of energy efficiently measures for residential buildings.  

E-Print Network (OSTI)

?? The purpose of this project was to evaluate how energy efficiently some of JM’s residential buildings can become in standard production. What kind of… (more)

Jakobsson, Niklas

2007-01-01T23:59:59.000Z

60

Energy Efficient Residential Building Code for Arab Countries  

E-Print Network (OSTI)

This paper presents an energy analysis to support the Egyptian efforts to develop a New Energy Code for New Residential Buildings in the Arab Countries. Also, the paper represents a brief summary of the code contents specially, the effectiveness of building envelope and weather data in reducing electrical energy consumption. The impacts of the following parameters were studied namely; walls and roof constructions, window size and glazing type for different geographical locations in the Arab Countries. Two different distinguish weather classification were developed and analyzed and presented in this study, the DDC18.3& DDH 25. The first was developed by the Author to calculate DD using a mathematical model on electronic spread sheet. The second depends on the hourly values for each geographical location. The analysis includes the capitals and major cities representing most of the Arab countries. It was determined that the window to wall ratio (WWR) of 15% minimizes the total annual electricity use for the buildings. The Solar Factors (SF) and Window Orientation Factors (OF) were calculated for the eight wall orientations. The Over All Transfer Value (OTTV) was calculated for each orientation for different variables, e.g. WWR, Glazing Type, Shading, wall color and mid and top floor. The results show that the mass and types of building materials; WWR (15%), glass type and shutters; orientation; wall insulation (25mm), wall solar absorptivity (a=.3); roof insulation and shading effect enhance the thermal performance and reduces the cooling load by 60%.

Hanna, G. B.

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Buildings Energy Data Book: 2.2 Residential Sector Characteristics  

Buildings Energy Data Book (EERE)

Square footage includes attic, garage, and basement square footage. EIA, 2005 Residential Energy Consumption Survey, Oct. 2008. Share of Average Home Size (1) Average Home Size...

62

Energy Use and Indoor Thermal Environment of Residential Buildings in China  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Use and Indoor Thermal Environment of Residential Buildings in China Energy Use and Indoor Thermal Environment of Residential Buildings in China Speaker(s): Hiroshi Yoshino Date: December 16, 2003 - 12:00pm Location: 90-3122 The first part of this talk will deal with the project on Energy Consumption and Indoor Environment Problems of Residential Buildings in China, organized by the Architectural Institute of Japan. Prof. Yoshino will discuss the results of project elements, including: 1) Literature survey and field investigation on energy consumption and indoor environment of residential buildings, 2) Compilation of weather data for building design based on observed data in China, 3) Literature survey and field investigation on energy consumption and indoor environment of residential buildings, 4) Estimation and verification of the effects of various

63

Better Buildings Partners: Better Buildings Residential Network  

NLE Websites -- All DOE Office Websites (Extended Search)

Network The Better Buildings Residential Network connects energy efficiency programs and partners to share best practices and learn from one another to dramatically increase the...

64

EMPS-2.1 Computer Program for Residential Building Energy Analysis, Engineering Manual  

Science Conference Proceedings (OSTI)

Evaluating the projected energy efficiency of residential building designs and equipment options requires a sophisticated analytic methodology. Techniques described in this manual analyze building thermal loads, heating and cooling systems, water heaters, and life-cycle costs and electric rates.

1988-02-08T23:59:59.000Z

65

Buildings Energy Data Book: 2.4 Residential Environmental Data  

Buildings Energy Data Book (EERE)

7 7 2009 Methane Emissions for U.S. Residential Buildings Energy Production, by Fuel Type Fuel Type Petroleum 1.0 Natural Gas 38.8 Coal 0.0 Wood 2.6 Electricity (2) 51.6 Total 94.0 Note(s): Source(s): MMT CO2 Equivalent (1) 1) Sources of emissions include oil and gas production, processing, and distribution; coal mining; and utility and site combustion. Carbon Dioxide equivalent units are calculated by converting methane emissions to carbon dioxide emissions (methane's global warming potential is 23 times that of carbon dioxide). 2) Emissions of electricity generators attributable to the buildings sector. EIA, Emissions of Greenhouse Gases in the U.S. 2009, Mar. 2011, Table 18, p. 37 for energy production emissions; EPA, Inventory of U.S. Greenhouse Gas Emissions and Sinks: 1990-2009, April 2011, Table 3-10, p. 3-9 for stationary combustion emissions; and EIA, Annual Energy Outlook 2012 Early Release,

66

Building and occupant characteristics as determinants of residential energy consumption  

Science Conference Proceedings (OSTI)

The major goals of the research are to gain insight into the probable effects of building energy performance standards on energy consumption; to obtain observations of actual residential energy consumption that could affirm or disaffirm comsumption estimates of the DOE 2.0A simulation model; and to investigate home owner's conservation investments and home purchase decisions. The first chapter covers the investigation of determinants of household energy consumption. The presentation begins with the underlying economic theory and its implications, and continues with a description of the data collection procedures, the formulation of variables, and then of data analysis and findings. In the second chapter the assumptions and limitations of the energy use projections generated by the DOE 2.0A model are discussed. Actual electricity data for the houses are then compared with results of the simulation. The third chapter contains information regarding households' willingness to make energy conserving investments and their ranking of various conservation features. In the final chapter conclusions and recommendations are presented with an emphasis on the policy implications of this study. (MCW)

Nieves, L.A.; Nieves, A.L.

1981-10-01T23:59:59.000Z

67

Building Energy Software Tools Directory: Right-Suite Residential for  

NLE Websites -- All DOE Office Websites (Extended Search)

Right-Suite Residential for Windows Right-Suite Residential for Windows Right-Suite Residential for Windows logo. All-in-one HVAC software performs residential loads calculations, duct sizing, energy analysis, equipment selection, cost comparison calculations, and geothermal loop design. Also allows you to design your own custom proposals. Used for system design, for sales representation, and for quotation preparations. Buy only what you need. Unused functions are shipped as demos, so the program can grow with your needs. Keywords residential loads calculations, duct sizing, energy analysis, HVAC equipment selection, system design Validation/Testing N/A Expertise Required Knowledge of general HVAC concepts. High level of computer literacy not required. Users Over 10,000 users of Right-J loads.

68

Summary of Gaps and Barriers for Implementing Residential Building Energy Efficiency Strategies  

SciTech Connect

This report presents the key gaps and barriers to implementing residential energy efficiency strategies in the U.S. market, as identified in sessions at the U.S. Department of Energy's Building America 2010 Residential Energy Efficiency Meeting held in Denver, Colorado, on July 20-22, 2010.

2010-08-01T23:59:59.000Z

69

Better Buildings Neighborhood Program: Better Buildings Residential...  

NLE Websites -- All DOE Office Websites (Extended Search)

Better Buildings Residential Network to someone by E-mail Share Better Buildings Neighborhood Program: Better Buildings Residential Network on Facebook Tweet about Better Buildings...

70

Building Technologies Office: Commercial Building Energy Asset...  

NLE Websites -- All DOE Office Websites (Extended Search)

TECHNOLOGIES RESIDENTIAL BUILDINGS COMMERCIAL BUILDINGS APPLIANCE & EQUIPMENT STANDARDS BUILDING ENERGY CODES EERE Building Technologies Office Commercial Buildings...

71

Buildings Energy Data Book: 2.2 Residential Sector Characteristics  

Buildings Energy Data Book (EERE)

to 1,499 24% 1,500 to 1,999 16% 2,000 to 2,499 9% 2,500 to 2,999 7% 3,000 or more 11% Total 100% Source(s): EIA, 2005 Residential Energy Consumption Survey, Oct. 2008, Table HC1-3....

72

Buildings Energy Data Book: 2.2 Residential Sector Characteristics  

Buildings Energy Data Book (EERE)

6.9% 5 or more units 2.1% 13.0% 15.0% Mobile Homes 5.1% 1.1% 6.2% Total 70.3% 29.6% 100% Source(s): EIA, 2005 Residential Energy Consumption Survey, Oct. 2008, Table HC3-1 and HC4...

73

Building Technologies Residential Survey  

SciTech Connect

Introduction A telephone survey of 1,025 residential occupants was administered in late October for the Building Technologies Program (BT) to gather information on residential occupant attitudes, behaviors, knowledge, and perceptions. The next section, Survey Results, provides an overview of the responses, with major implications and caveats. Additional information is provided in three appendices as follows: - Appendix A -- Summary Response: Provides summary tabular data for the 13 questions that, with subparts, comprise a total of 25 questions. - Appendix B -- Benchmark Data: Provides a benchmark by six categories to the 2001 Residential Energy Consumption Survey administered by EIA. These were ownership, heating fuel, geographic location, race, household size and income. - Appendix C -- Background on Survey Method: Provides the reader with an understanding of the survey process and interpretation of the results.

Secrest, Thomas J.

2005-11-07T23:59:59.000Z

74

Buildings Energy Data Book: 2.4 Residential Environmental Data  

Buildings Energy Data Book (EERE)

4 4 2015 Residential Buildings Energy End-Use Carbon Dioxide Emissions Splits, by Fuel Type (Million Metric Tons) (1) Natural Petroleum Gas Distil. Resid. LPG Oth(2) Total Coal Electricity (3) Total Percent Space Heating (4) 180.5 34.9 16.6 1.8 53.3 0.6 66.6 301.0 27.4% Space Cooling 0.0 161.1 161.1 14.7% Water Heating 69.6 5.1 3.1 8.2 75.3 153.1 13.9% Lighting 83.7 83.7 7.6% Refrigeration (5) 71.7 71.7 6.5% Electronics (6) 52.0 52.0 4.7% Wet Cleaning (7) 3.2 51.6 54.7 5.0% Cooking 11.5 1.8 1.8 17.9 31.1 2.8% Computers 30.0 30.0 2.7% Other (8) 10.6 10.6 149.3 160.0 14.6% Total 264.7 40.1 32.2 1.8 74.0 0.6 100% Note(s): Source(s): 759.1 1,098.4 1) Emissions assume complete combustion from energy consumption, excluding gas flaring, coal mining, and cement production. Emissions exclude wood since it is assumed that the carbon released from combustion is reabsorbed in a future carbon cycle. 2) Includes kerosene

75

Buildings Energy Data Book: 2.4 Residential Environmental Data  

Buildings Energy Data Book (EERE)

3 3 2010 Residential Buildings Energy End-Use Carbon Dioxide Emissions Splits, by Fuel Type (Million Metric Tons) (1) Natural Petroleum Gas Distil. Resid. LPG Oth(2) Total Coal Electricity (3) Total Percent Space Heating (4) 185.5 38.8 18.7 2.2 59.7 0.7 77.6 323.5 26.3% Space Cooling 0.0 210.2 210.2 17.1% Water Heating 68.7 7.1 4.6 11.7 90.4 170.8 13.9% Lighting 126.0 126.0 10.2% Electronics (5) 96.5 96.5 7.8% Refrigeration (6) 80.7 80.7 6.6% Wet Cleaning (7) 2.9 57.8 60.8 4.9% Cooking 11.4 1.9 1.9 42.6 55.9 4.5% Computers 30.5 30.5 2.5% Other (8) 10.2 10.2 36.3 46.5 3.8% Adjust to SEDS (9) 30.1 30.1 2.4% Total 268.5 45.9 35.3 2.2 83.5 0.7 100% Note(s): Source(s): 878.7 1,231.4 1) Emissions assume complete combustion from energy consumption, excluding gas flaring, coal mining, and cement production. Emissions exclude wood since it is assumed that the carbon released from combustion is reabsorbed in a future carbon cycle. Carbon emissions

76

Buildings Energy Data Book: 2.4 Residential Environmental Data  

Buildings Energy Data Book (EERE)

6 6 2035 Residential Buildings Energy End-Use Carbon Dioxide Emissions Splits, by Fuel Type (Million Metric Tons) (1) Natural Petroleum Gas Distil. Resid. LPG Oth(2) Total Coal Total Percent Space Heating (4) 169.7 22.8 14.1 1.5 38.3 0.5 76.7 285.3 23.1% Water Heating 67.2 2.6 2.1 4.7 84.8 156.7 12.7% Space Cooling 0.0 194.5 194.5 15.7% Electronics (5) 68.1 68.1 5.5% Refrigeration (6) 81.5 81.5 6.6% Lighting 74.3 74.3 6.0% Wet Cleaning (7) 3.5 50.0 53.4 4.3% Cooking 12.2 1.5 1.5 23.2 37.0 3.0% Computers 41.9 41.9 3.4% Other (8) 14.1 14.1 229.6 243.7 19.7% Total 252.7 25.4 31.9 1.5 58.7 0.5 100% Note(s): Source(s): Electricity (3) 924.5 1,236.4 1) Emissions assume complete combustion from energy consumption, excluding gas flaring, coal mining, and cement production. Emissions exclude wood since it is assumed that the carbon released from combustion is reabsorbed in a future carbon cycle. 2) Includes kerosene

77

Buildings Energy Data Book: 2.4 Residential Environmental Data  

Buildings Energy Data Book (EERE)

5 5 2025 Residential Buildings Energy End-Use Carbon Dioxide Emissions Splits, by Fuel Type (Million Metric Tons) (1) Natural Petroleum Gas Distil. Resid. LPG Oth(2) Total Coal Electricity (3) Total Percent Space Heating (4) 173.9 27.9 15.2 1.6 44.7 0.6 73.2 292.3 25.1% Space Cooling 0.0 177.2 177.2 15.2% Water Heating 70.2 3.5 2.5 6.0 83.7 159.9 13.8% Lighting 74.1 74.1 6.4% Refrigeration (5) 75.8 75.8 6.5% Electronics (6) 58.7 58.7 5.1% Wet Cleaning (7) 3.3 47.9 51.2 4.4% Cooking 11.7 1.6 1.6 20.8 34.2 2.9% Computers 37.6 37.6 3.2% Other (8) 12.4 12.4 189.1 201.5 17.3% Total 259.1 31.3 31.8 1.6 64.7 0.6 100% Note(s): Source(s): 838.1 1,162.5 1) Emissions assume complete combustion from energy consumption, excluding gas flaring, coal mining, and cement production. Emissions exclude wood since it is assumed that the carbon released from combustion is reabsorbed in a future carbon cycle. 2) Includes kerosene

78

Building Energy Software Tools Directory : HVAC Residential Load...  

NLE Websites -- All DOE Office Websites (Extended Search)

HVAC Residential Load Calcs HD for the iPad Back to Tool HVAC Residential Load Calcs HD screenshot HVAC Residential Load Calcs HD screenshot HVAC Residential Load Calcs HD...

79

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book (EERE)

1 1 2005 Energy Expenditures per Household, by Housing Type and Square Footage ($2010) Per Household Single-Family 1.16 Detached 1.16 Attached 1.20 Multi-Family 1.66 2 to 4 units 1.90 5 or more units 1.53 Mobile Home 1.76 All Homes 1.12 Note(s): Source(s): 1) Energy expenditures per square foot were calculated using estimates of average heated floor space per household. According to the 2005 Residential Energy Consumption Survey (RECS), the average heated floor space per household in the U.S. was 1,618 square feet. Average total floor space, which includes garages, attics and unfinished basements, equaled 2,309 square feet. EIA, 2005 Residential Energy Consumption Survey, Oct. 2008, Table US-1 part1; and EIA, Annual Energy Review 2010, Oct. 2011, Appendix D, p. 353 for

80

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book (EERE)

2 2 2005 Household Energy Expenditures, by Vintage ($2010) | Year | Prior to 1950 887 | 22% 1950 to 1969 771 | 22% 1970 to 1979 736 | 16% 1980 to 1989 741 | 16% 1990 to 1999 752 | 16% 2000 to 2005 777 | 9% | Average 780 | Total 100% Note(s): Source(s): 1.24 2,003 1) Energy expenditures per square foot were calculated using estimates of average heated floor space per household. According to the 2005 Residential Energy Consumption Survey (RECS), the average heated floor space per household in the U.S. was 1,618 square feet. Average total floor space, which includes garages, attics and unfinished basements, equaled 2,309 square feet. EIA, 2005 Residential Energy Consumption Survey, Oct. 2008 for 2005 expenditures; and EIA, Annual Energy Review 2010, Oct. 2011, Appendix D, p. 353 for price inflators.

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Energy Efficiency Trends in Residential and Commercial Buildings...  

NLE Websites -- All DOE Office Websites (Extended Search)

has grown. Natural gas is the second largest energy source and petroleum (predominantly heating oil) a distant third. Buildings demand for electricity was the principal force...

82

APPLICATION OF DOE-2 TO RESIDENTIAL BUILDING ENERGY PERFORMANCE STANDARDS  

SciTech Connect

One important requirement emerging from national and international efforts to shift from our present energy-intensive way of life to an energy conservation mode is the development of standards for assessing and regulating energy use and performance in buildings. This paper describes a life-cycle-cost approach to Building Energy Performance Standards (BEPS) calculated by using DOE-2: The Energy Use Analysis of Buildings Computer Program. The procedure outlined raises important questions that must be answered before the energy budgets devised from this approach can be reliably used as a policy tool, The DOE-2 program was used to calculate the energy consumption in prototype buildings and in their modified versions in which energy conservation measures were effected. The energy use of a modified building with lowest life-cycle-cost determines the energy budget for all buildings of that type. These calculations were based on a number of assumptions that may be controversial. These assumptions regard accuracy of the model, comparison of the DOE-2 program with other programs, stability of the energy budget, and sensitivity of the results to variations in the building parameters.

Lokmanhekim, M.; Goldstein, D. B.; Levine, M. D.; Rosenfield, A. H.

1980-10-01T23:59:59.000Z

83

Better Buildings Neighborhood Program: Better Buildings Residential  

NLE Websites -- All DOE Office Websites (Extended Search)

Better Better Buildings Residential Network-Current Members to someone by E-mail Share Better Buildings Neighborhood Program: Better Buildings Residential Network-Current Members on Facebook Tweet about Better Buildings Neighborhood Program: Better Buildings Residential Network-Current Members on Twitter Bookmark Better Buildings Neighborhood Program: Better Buildings Residential Network-Current Members on Google Bookmark Better Buildings Neighborhood Program: Better Buildings Residential Network-Current Members on Delicious Rank Better Buildings Neighborhood Program: Better Buildings Residential Network-Current Members on Digg Find More places to share Better Buildings Neighborhood Program: Better Buildings Residential Network-Current Members on AddThis.com...

84

SPP sales flyer for residential home builders | ENERGY STAR Buildings &  

NLE Websites -- All DOE Office Websites (Extended Search)

residential home builders residential home builders Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources Success stories Target Finder

85

The Consortium of Advanced Residential Buildings (CARB) - A Building America Energy Efficient Housing Partnership  

SciTech Connect

This final report summarizes the work conducted by the Consortium of Advanced Residential Buildings (CARB) (http://www.carb-swa.com/), one of the 'Building America Energy Efficient Housing Partnership' Industry Teams, for the period January 1, 2008 to December 31, 2010. The Building America Program (BAP) is part of the Department of Energy (DOE), Energy Efficiency and Renewable Energy, Building Technologies Program (BTP). The long term goal of the BAP is to develop cost effective, production ready systems in five major climate zones that will result in zero energy homes (ZEH) that produce as much energy as they use on an annual basis by 2020. CARB is led by Steven Winter Associates, Inc. with Davis Energy Group, Inc. (DEG), MaGrann Associates, and Johnson Research, LLC as team members. In partnership with our numerous builders and industry partners, work was performed in three primary areas - advanced systems research, prototype home development, and technical support for communities of high performance homes. Our advanced systems research work focuses on developing a better understanding of the installed performance of advanced technology systems when integrated in a whole-house scenario. Technology systems researched included: - High-R Wall Assemblies - Non-Ducted Air-Source Heat Pumps - Low-Load HVAC Systems - Solar Thermal Water Heating - Ventilation Systems - Cold-Climate Ground and Air Source Heat Pumps - Hot/Dry Climate Air-to-Water Heat Pump - Condensing Boilers - Evaporative condensers - Water Heating CARB continued to support several prototype home projects in the design and specification phase. These projects are located in all five program climate regions and most are targeting greater than 50% source energy savings over the Building America Benchmark home. CARB provided technical support and developed builder project case studies to be included in near-term Joule Milestone reports for the following community scale projects: - SBER Overlook at Clipper Mill (mixed, humid climate) - William Ryan Homes - Tampa (hot, humid climate).

Robb Aldrich; Lois Arena; Dianne Griffiths; Srikanth Puttagunta; David Springer

2010-12-31T23:59:59.000Z

86

The Consortium of Advanced Residential Buildings (CARB) - A Building America Energy Efficient Housing Partnership  

SciTech Connect

This final report summarizes the work conducted by the Consortium of Advanced Residential Buildings (CARB) (http://www.carb-swa.com/), one of the 'Building America Energy Efficient Housing Partnership' Industry Teams, for the period January 1, 2008 to December 31, 2010. The Building America Program (BAP) is part of the Department of Energy (DOE), Energy Efficiency and Renewable Energy, Building Technologies Program (BTP). The long term goal of the BAP is to develop cost effective, production ready systems in five major climate zones that will result in zero energy homes (ZEH) that produce as much energy as they use on an annual basis by 2020. CARB is led by Steven Winter Associates, Inc. with Davis Energy Group, Inc. (DEG), MaGrann Associates, and Johnson Research, LLC as team members. In partnership with our numerous builders and industry partners, work was performed in three primary areas - advanced systems research, prototype home development, and technical support for communities of high performance homes. Our advanced systems research work focuses on developing a better understanding of the installed performance of advanced technology systems when integrated in a whole-house scenario. Technology systems researched included: - High-R Wall Assemblies - Non-Ducted Air-Source Heat Pumps - Low-Load HVAC Systems - Solar Thermal Water Heating - Ventilation Systems - Cold-Climate Ground and Air Source Heat Pumps - Hot/Dry Climate Air-to-Water Heat Pump - Condensing Boilers - Evaporative condensers - Water Heating CARB continued to support several prototype home projects in the design and specification phase. These projects are located in all five program climate regions and most are targeting greater than 50% source energy savings over the Building America Benchmark home. CARB provided technical support and developed builder project case studies to be included in near-term Joule Milestone reports for the following community scale projects: - SBER Overlook at Clipper Mill (mixed, humid climate) - William Ryan Homes - Tampa (hot, humid climate).

Robb Aldrich; Lois Arena; Dianne Griffiths; Srikanth Puttagunta; David Springer

2010-12-31T23:59:59.000Z

87

Residential Energy and Cost Analysis Methodology | Building Energy...  

NLE Websites -- All DOE Office Websites (Extended Search)

types. National energy savings are reported, in addition to economic metrics by state and climate zone. In considering cost-effectiveness, longer term energy savings are balanced...

88

Buildings Energy Data Book: 2.4 Residential Environmental Data  

Buildings Energy Data Book (EERE)

1 1 Carbon Dioxide Emissions for U.S. Residential Buildings, by Year (Million Metric Tons) (1) Residential U.S. Site Res.% Res.% Fossil Electricity Total Total of Total U.S. of Total Global 1980 385 525 909 4723 19% 4.9% 1981 361 518 878 4601 19% 4.8% 1982 359 511 870 4357 20% 4.8% 1983 340 525 865 4332 20% 4.7% 1984 349 535 883 4561 19% 4.6% 1985 351 549 901 4559 20% 4.6% 1986 343 551 894 4564 20% 4.5% 1987 346 574 920 4714 20% 4.5% 1988 367 603 970 4939 20% 4.6% 1989 374 606 980 4983 20% 4.6% 1990 340 624 963 5039 19% 4.5% 1991 347 633 980 4996 20% 4.6% 1992 357 624 981 5093 19% 4.6% 1993 372 667 1040 5185 20% 4.8% 1994 364 668 1032 5258 20% 4.7% 1995 361 678 1039 5314 20% 4.7% 1996 389 710 1099 5501 20% 4.9% 1997 371 719 1090 5575 20% 4.7% 1998 339 759 1097 5622 20% 4.8% 1999 360 762 1122 5682 20% 4.8% 2000 380 805 1185 5867 20% 5.0% 2001 367 805 1172 5759 20% 4.9% 2002 368 835 1204 5809 21% 4.9% 2003 383 847 1230

89

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book (EERE)

4 4 Cost of a Generic Quad Used in the Residential Sector ($2010 Billion) (1) Residential 1980 10.45 1981 11.20 1982 11.58 1983 11.85 1984 11.65 1985 11.43 1986 10.90 1987 10.55 1988 10.18 1989 9.98 1990 10.12 1991 9.94 1992 9.78 1993 9.77 1994 9.78 1995 9.44 1996 9.44 1997 9.59 1998 9.23 1999 8.97 2000 9.57 2001 10.24 2002 9.33 2003 10.00 2004 10.32 2005 11.10 2006 11.60 2007 11.61 2008 12.29 2009 11.65 2010 9.98 2011 9.99 2012 9.87 2013 9.77 2014 9.76 2015 9.88 2016 9.85 2017 9.83 2018 9.86 2019 9.88 2020 9.91 2021 10.00 2022 10.09 2023 10.11 2024 10.12 2025 10.09 2026 10.10 2027 10.13 2028 10.11 2029 10.06 2030 10.06 2031 10.13 2032 10.23 2033 10.34 2034 10.45 2035 10.57 Note(s): 1) See Table 1.5.1 for generic quad definition. This table provides the consumer cost of a generic quad in the buildings sector. Use this table to estimate the average consumer cost savings resulting from the savings of a generic (primary) quad in the buildings sector. 2) Price of

90

NREL: Buildings Research - Residential Buildings Research Staff  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential Buildings Research Staff Residential Buildings Research Staff Members of the Residential Buildings research staff have backgrounds in architectural, civil, electrical, environmental, and mechanical engineering, as well as environmental design and physics. Ren Anderson Dennis Barley Chuck Booten Jay Burch Sean Casey Craig Christensen Dane Christensen Lieko Earle Cheryn Engebrecht Mike Gestwick Mike Heaney Scott Horowitz Kate Hudon Xin Jin Noel Merket Tim Merrigan David Roberts Joseph Robertson Stacey Rothgeb Bethany Sparn Paulo Cesar Tabares-Velasco Jeff Tomerlin Jon Winkler Jason Woods Support Staff Marcia Fratello Kristy Usnick Photo of Ren Anderson Ren Anderson, Ph.D., Manager, Residential Research Group ren.anderson@nrel.gov Research Focus: Evaluating the whole building benefits of emerging building energy

91

Energy Efficiency Trends in Residential and Commercial Buildings Â… August 2010  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Efficiency Efficiency Trends in Residential and Commercial Buildings August 2010 Prepared by McGraw-Hill Construction for the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy OF ENERGY Table of Contents INTRODUCTION 3 EXECUTIVE SUMMARY 4 Chapter One DRIVERS OF ENERGY USE IN BUILDINGS 5 Chapter Two PROFILES OF BUILDING-SECTOR ENERGY USE 13 Chapter Three PATTERNS OF ENERGY-EFFICIENT BUILDING PRODUCT ADOPTION IN COMMERCIAL BUILDING DESIGN 17 Chapter Four INDUSTRY RESEARCH FINDINGS DRIVING ENERGY-EFFICIENT BUILDINGS 25 Chapter Five ENERGY EFFICIENCY STANDARDS, CODES AND INCENTIVES 31 Chapter Six VOLUNTARY PROGRAMS AND LOCAL AND STATE POLICIES FOR GREEN AND ENERGY-EFFICIENT BUILDINGS 38 Chapter Seven RESOURCES FOR MORE INFORMATION 50 Notes and definitions:

92

U.S. Residential Buildings Weather-Adjusted Primary Consumption  

U.S. Energy Information Administration (EIA)

Home > Households, Buildings & Industry > Energy Efficiency Page > Energy Intensities > Table 8c Glossary U.S. Residential Buildings ...

93

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book (EERE)

4 4 2005 Average Household Expenditures as Percent of Annual Income, by Census Region ($2010) Item Energy (1) Shelter (2) Food Telephone, water and other public services Household supplies, furnishings and equipment (3) Transportation (4) Healthcare Education Personal taxes (5) Average Annual Expenditures Average Annual Income Note(s): Source(s): 1) Average household energy expenditures are calculated from the Residential Energy Consumption Survey (RECS), while average expenditures for other categories are calculated from the Consumer Expenditure Survey (CE). RECS assumed total US households to be 111,090,617 in 2005, while the CE data is based on 117,356,000 "consumer units," which the Bureau of Labor Statistics defines to be financially independent persons or groups of people that use their incomes to make joint expenditure decisions, including all members of a

94

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book (EERE)

3 3 2005 Average Household Expenditures, by Census Region ($2010) Item Energy (1) Shelter (2) Food Telephone, water and other public services Household supplies, furnishings and equipment (3) Transportation (4) Healthcare Education Personal taxes (5) Other expenditures Average Annual Income Note(s): Source(s): 1) Average household energy expenditures are calculated from the Residential Energy Consumption Survey (RECS), while average expenditures for other categories are calculated from the Consumer Expenditure Survey (CE). RECS assumed total US households to be 111,090,617 in 2005, while the CE data is based on 117,356,000 "consumer units," which the Bureau of Labor Statistics defines to be financially independent persons or groups of people that use their incomes to make joint expenditure decisions, including all members of a

95

Application and Design of Residential Building Energy Saving in Cold Climates  

E-Print Network (OSTI)

Climate is the one of main considerations for residential building design since the green and energy saving building has become the trend in the building industry. China is actively popularizing high energy-effective and environment harmonious buildings that integrate new techniques, new materials and new equipment. It is absolutely essential to summarize and demonstrate the application of energy-saving building in cold climates for the sake of a favorable economy and directions in the modern building industry. This paper discusses the cold climate features in China vis-ŕ-vis the residential building layout, construction, building materials, envelope and cost from the aspects of environmental optimization and energy efficiency. The investigation combines indoor microclimates in order to decrease the building life cycle energy consumption. The air wall technology is studied for adoption of cold climate features. The research results through a National Demonstration Building Project (NDBP) show that the exterior wall total heat transfer coefficient is K=0.3w/(m2.k). Moreover, this four-layer dual heat-preservation exterior wall has more conformability and higher energy efficiency. It is completely successful for energy saving building project NDBP that deserves generalization because of adoption of cold climates features. The application of energy saving buildings can achieve social, environmental and economical benefits.

Li, Z.; Li, D.; Mei, S.; Zhang, G.; Liu, J.

2006-01-01T23:59:59.000Z

96

Building Energy Software Tools Directory: HVAC Residential Load...  

NLE Websites -- All DOE Office Websites (Extended Search)

HVAC Residential Load Calcs HD for the iPad Carmel Software logo HVAC Residential Load Calcs HD is a comprehensive HVAC heating and cooling load calculation application for the...

97

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

E-Print Network (OSTI)

The Feasibility of Small-Scale Residential DC Distributionof a DC microgrid for residential houses. In Transmission &energy storage with PV for residential and commercial use.

Garbesi, Karina

2012-01-01T23:59:59.000Z

98

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book (EERE)

7 7 Range 10 4 48 Clothes Dryer 359 (2) 4 49 Water Heating Water Heater-Family of 4 40 64 (3) 26 294 Water Heater-Family of 2 40 32 (3) 12 140 Note(s): Source(s): 1) $1.139/therm. 2) Cycles/year. 3) Gallons/day. A.D. Little, EIA-Technology Forecast Updates - Residential and Commercial Building Technologies - Reference Case, Sept. 2, 1998, p. 30 for range and clothes dryer; LBNL, Energy Data Sourcebook for the U.S. Residential Sector, LBNL-40297, Sept. 1997, p. 62-67 for water heating; GAMA, Consumers' Directory of Certified Efficiency Ratings for Heating and Water Heating Equipment, Apr. 2002, for water heater capacity; and American Gas Association, Gas Facts 1998, December 1999, www.aga.org for range and clothes dryer consumption. Operating Characteristics of Natural Gas Appliances in the Residential Sector

99

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book (EERE)

3 3 Residential Aggregate Energy Expenditures, by Year and Major Fuel Type ($2010 Billion) (1) Electricity Total 1980 158.5 1981 164.0 1982 172.3 1983 176.1 1984 178.5 1985 176.8 1986 169.2 1987 167.1 1988 170.1 1989 172.8 1990 168.2 1991 169.9 1992 166.7 1993 175.6 1994 174.9 1995 172.7 1996 181.8 1997 180.0 1998 173.5 1999 174.0 2000 192.8 2001 203.3 2002 192.1 2003 208.8 2004 215.1 2005 236.7 2006 240.0 2007 246.1 2008 259.6 2009 241.6 2010 251.8 2011 251.3 2012 247.1 2013 240.3 2014 239.4 2015 241.7 2016 241.8 2017 243.0 2018 244.7 2019 246.4 2020 247.9 2021 250.4 2022 253.3 2023 255.6 2024 257.8 2025 260.3 2026 263.2 2027 266.0 2028 267.6 2029 268.1 2030 269.7 2031 272.9 2032 276.6 2033 280.4 2034 284.6 2035 288.6 Note(s): Source(s): 1) Residential petroleum products include distillate fuel oil, LPG, and kerosene. EIA, State Energy Data 2009: Prices and Expenditures, Jun. 2011, Table 2 for 1980-2009; EIA, Annual Energy Outlook 2012 Early Release, Jan. 2012, Table

100

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book (EERE)

5 5 2005 Households and Energy Expenditures, by Income Level ($2010) Energy Expenditures by Household Income Households (millions) Household Less than $10,000 9.9 9% $10,000 to $14,999 8.5 8% $15,000 to $19,999 8.4 8% $20,000 to $29,999 15.1 14% $30,000 to $39,999 13.6 12% $40,000 to $49,999 11.0 10% $50,000 to $74,999 19.8 18% $75,000 to $99,999 10.6 10% $100,000 or more 14.2 13% Total 111.1 100% Note(s): Source(s): 7% 1) See Table 2.3.15 for more on energy burdens. 2) A household is defined as a family, an individual, or a group of up to nine unrelated individuals occupying the same housing unit. EIA, 2005 Residential Energy Consumption Survey, Oct. 2008, Table US-1 part 2; and EIA, Annual Energy Review 2010, Oct. 2011, Appendix D, p. 353 for price inflators. 2,431 847 3% 2,774 909 3% 1,995

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book (EERE)

5 5 2010 Residential Energy End-Use Expenditure Splits, by Fuel Type ($2010 Billion) (1) Natural Petroleum Gas Distil. LPG Kerosene Total Coal Electricity Total Percent Space Heating (2) 38.7 11.2 8.0 19.8 0.0 14.3 72.9 28.9% Space Cooling (3) 0.0 35.4 35.4 14.0% Water Heating (4) 14.3 2.1 2.0 4.0 14.2 32.6 12.9% Lighting 22.6 22.6 9.0% Refrigeration (5) 14.9 14.9 5.9% Electronics (6) 17.8 17.8 7.1% Cooking 2.4 0.8 0.8 6.0 9.2 3.7% Wet Cleaning (7) 0.6 10.7 11.3 4.5% Computers 5.6 5.6 2.2% Other (8) 0.0 4.4 4.4 6.7 11.1 4.4% Adjust to SEDS (9) 13.6 13.6 5.4% Total 56.1 13.3 15.2 29.0 0.0 166.8 251.8 100% Note(s): Source(s): 0.5 0.5 1) Expenditures include coal and exclude wood. 2) Includes furnace fans ($4.5 billion). 3) Fan energy use included. 4) Includes residential recreational water heating ($1.4 billion). 5) Includes refrigerators ($15.3 billion) and freezers ($4.4 billion). 6) Includes color televisions ($11.0

102

Building Technologies Office: Residential Building Activities  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Activities Building Activities The Department of Energy (DOE) is leading several different activities to develop, demonstrate, and deploy cost-effective solutions to reduce energy consumption across the residential building sector by at least 50%. The U.S. DOE Solar Decathlon is a biennial contest which challenges college teams to design and build energy efficient houses powered by the sun. Each team competes in 10 contests designed to gauge the performance, livability and affordability of their house. The Building America program develops market-ready energy solutions that improve the efficiency of new and existing homes while increasing comfort, safety, and durability. Guidelines for Home Energy Professionals foster the growth of a high quality residential energy upgrade industry and a skilled and credentialed workforce.

103

Improving the Accuracy of Software-Based Energy Analysis for Residential Buildings (Presentation)  

SciTech Connect

This presentation describes the basic components of software-based energy analysis for residential buildings, explores the concepts of 'error' and 'accuracy' when analysis predictions are compared to measured data, and explains how NREL is working to continuously improve the accuracy of energy analysis methods.

Polly, B.

2011-09-01T23:59:59.000Z

104

About Residential | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Buildings » About Residential Residential Buildings » About Residential About Residential The Building Technologies Office (BTO) collaborates with home builders, energy professionals, state and local governments, utilities, product manufacturers, educators, and researchers to improve the energy efficiency of both new and existing homes. Residential Sector Activities Include: Demonstrating to builders and remodelers how to build and renovate for high performance through best practice guides and case studies and continuing to developing innovative whole-house energy efficiency solutions through Building America research projects. We also provide guidelines and tools for researchers conducting building related research projects. Promoting a trusted, whole-house process for upgrading existing homes with

105

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book (EERE)

2 2 Residential Energy Prices, by Year and Fuel Type ($2010) LPG ($/gal) 1980 2.24 1981 2.51 1982 2.30 1983 2.14 1984 2.10 1985 1.96 1986 1.54 1987 1.42 1988 1.39 1989 1.48 1990 1.69 1991 1.56 1992 1.40 1993 1.33 1994 1.27 1995 1.22 1996 1.37 1997 1.34 1998 1.15 1999 1.16 2000 1.70 2001 1.59 2002 1.42 2003 1.67 2004 1.84 2005 2.36 2006 2.64 2007 2.81 2008 3.41 2009 2.52 2010 2.92 2011 3.62 2012 3.65 2013 3.43 2014 3.60 2015 3.74 2016 3.79 2017 3.86 2018 3.89 2019 3.92 2020 3.96 2021 3.99 2022 4.02 2023 4.07 2024 4.10 2025 4.15 2026 4.19 2027 4.23 2028 4.26 2029 4.30 2030 4.34 2031 4.35 2032 4.38 2033 4.43 2034 4.50 2035 4.55 Source(s): EIA, State Energy Data 2009: Prices and Expenditures, Jun. 2011, Table 2, p. 24-25 for 1980-2009; EIA, Annual Energy Outlook 2012 Early Release, Jan. 2012, Table A3, p. 6-8 for 2010-2035 and Table G1, p. 215 for fuels' heat content; and EIA, Annual Energy Review 2010, Oct. 2011, Appendix D, p. 353 for

106

Current Status and Future Scenarios of Residential Building Energy Consumption in China  

SciTech Connect

China's rapid economic expansion has propelled it into the ranks of the largest energy consuming nation in the world, with energy demand growth continuing at a pace commensurate with its economic growth. Even though the rapid growth is largely attributable to heavy industry, this in turn is driven by rapid urbanization process, by construction materials and equipment produced for use in buildings. Residential energy is mostly used in urban areas, where rising incomes have allowed acquisition of home appliances, as well as increased use of heating in southern China. The urban population is expected to grow by 20 million every year, accompanied by construction of 2 billion square meters of buildings every year through 2020. Thus residential energy use is very likely to continue its very rapid growth. Understanding the underlying drivers of this growth helps to identify the key areas to analyze energy efficiency potential, appropriate policies to reduce energy use, as well as to understand future energy in the building sector. This paper provides a detailed, bottom-up analysis of residential building energy consumption in China using data from a wide variety of sources and a modeling effort that relies on a very detailed characterization of China's energy demand. It assesses the current energy situation with consideration of end use, intensity, and efficiency etc, and forecast the future outlook for the critical period extending to 2020, based on assumptions of likely patterns of economic activity, availability of energy services, technology improvement and energy intensities.

Zhou, Nan; Nishida, Masaru; Gao, Weijun

2008-12-01T23:59:59.000Z

107

Current Status and Future Scenarios of Residential Building Energy Consumption in China  

SciTech Connect

China's rapid economic expansion has propelled it into the ranks of the largest energy consuming nation in the world, with energy demand growth continuing at a pace commensurate with its economic growth. Even though the rapid growth is largely attributable to heavy industry, this in turn is driven by rapid urbanization process, by construction materials and equipment produced for use in buildings. Residential energy is mostly used in urban areas, where rising incomes have allowed acquisition of home appliances, as well as increased use of heating in southern China. The urban population is expected to grow by 20 million every year, accompanied by construction of 2 billion square meters of buildings every year through 2020. Thus residential energy use is very likely to continue its very rapid growth. Understanding the underlying drivers of this growth helps to identify the key areas to analyze energy efficiency potential, appropriate policies to reduce energy use, as well as to understand future energy in the building sector. This paper provides a detailed, bottom-up analysis of residential building energy consumption in China using data from a wide variety of sources and a modeling effort that relies on a very detailed characterization of China's energy demand. It assesses the current energy situation with consideration of end use, intensity, and efficiency etc, and forecast the future outlook for the critical period extending to 2020, based on assumptions of likely patterns of economic activity, availability of energy services, technology improvement and energy intensities.

Zhou, Nan; Nishida, Masaru; Gao, Weijun

2008-12-01T23:59:59.000Z

108

Residential Building Stockg Assessment (RBSA)for  

E-Print Network (OSTI)

9/4/2013 1 Residential Building Stockg Assessment (RBSA)for Multi-Family Housing Tom Eckman Objectives Characterize Residential Sector Building Stock ­ Single Family (Four-plex and below) l if il ( i Pacific Northwest Residential Energy Survey (PNWRES92)Survey (PNWRES92) NEEA Survey of Baseline

109

Energy management in residential and small commercial buildings. Annual report, fiscal year 1976  

DOE Green Energy (OSTI)

The goal of the present program is to develop the technical basis for efficient energy use in space heating of residential and small commercial buildings. Efficiency measurements performed on conventional residential oil-fired hot water heating equipment, including both steady state and cyclic (part load) efficiency determinations are described. A list of preliminary recommendations for retrofit actions to improve efficiency is provided. A summary of work carried out in the areas of thermal storage media, fenestration, and building thermal dynamics is also presented.

Batey, J.; Gazerro, V.; Salzano, F.J.; Berlad, A.L.

1976-07-01T23:59:59.000Z

110

Energy savings from direct-DC in U.S. residential buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

savings from direct-DC in U.S. residential buildings savings from direct-DC in U.S. residential buildings Title Energy savings from direct-DC in U.S. residential buildings Publication Type Journal Article Year of Publication 2013 Authors Vossos, Vagelis, Karina Garbesi, and Hongxia Shen Journal Energy and Buildings Volume Volume 68, Part A Pagination 223-231 Date Published 09/2013 Keywords Direct current (DC), energy conservation, Photovoltaics (PV), residential buildings Abstract An increasing number of energy-efficient appliances operate on direct current (DC) internally, offering the potential to use DC directly from renewable energy systems, thereby avoiding the energy losses inherent in converting power to alternating current (AC) and back. This paper investigates that potential for net-metered residences with on-site photovoltaics (PV) by modeling the net power draw of a 'direct-DC house' compared to that of a typical net-metered house with AC distribution, assuming identical DC-internal loads. The model comparisons were run for 14 cities in the United States, using hourly, simulated PV-system output and residential loads. The model tested the effects of climate and battery storage. A sensitivity analysis was conducted to determine how future changes in the efficiencies of power system components might affect potential energy savings. Based on this work, we estimate that net-metered PV residences could save 5% of their total electricity load for houses without storage and 14% for houses with storage. Direct-DC energy savings are sensitive to power system and appliance conversion efficiencies but are not significantly influenced by climate.

111

Building Technologies Office: Residential Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

building sector by at least 50%. Photo of people walking around a new home. Visitors Tour Solar Decathlon Homes Featuring the Latest in Energy Efficient Building Technology...

112

New test procedure evaluates quality and accuracy of energy analysis tools for the residential building retrofit market.  

E-Print Network (OSTI)

building retrofit market. Reducing the energy use of existing homes in the United States offers significant energy-saving opportunities, which can be identified through building simulation software tools for residential buildings, the National Renewable Energy Laboratory's (NREL) Buildings Research team developed

113

Assessment of Impacts from Adopting the 2009 International Energy Conservation Code for Residential Buildings in Michigan  

SciTech Connect

Energy and economic analysis comparing the current Michigan residential energy efficiency code to the 2009 IECC.

Lucas, Robert G.

2009-10-18T23:59:59.000Z

114

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book (EERE)

8 8 2035 Residential Energy End-Use Expenditure Splits, by Fuel Type ($2010 Billion) (1) Natural Petroleum Gas Distil. LPG Kerosene Total Coal Electricity Total Percent Space Heating (2) 44.3 10.3 7.7 18.6 0.0 16.0 79.0 27.4% Space Cooling (3) 0.0 40.6 40.6 14.1% Water Heating 17.6 1.2 1.2 2.3 17.7 37.6 13.0% Lighting 15.5 15.5 5.4% Refrigeration (4) 17.0 17.0 5.9% Electronics (5) 14.2 14.2 4.9% Wet Cleaning (6) 0.9 10.4 11.3 3.9% Cooking 3.2 0.8 0.8 4.8 8.9 3.1% Computers 8.7 8.7 3.0% Other (7) 0.0 7.7 7.7 47.9 55.7 19.3% Total 66.0 11.5 17.5 29.6 0.0 193.0 288.6 100% Note(s): Source(s): 0.6 0.6 1) Expenditures include coal and exclude wood. 2) Includes furnace fans ($4.8 billion). 3) Fan energy use included. 4) Includes refrigerators ($14.1 billion) and freezers ($2.9 billion). 5) Includes color televisions ($14.2 billion). 6) Includes clothes washers ($0.8 billion), natural gas

115

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book (EERE)

7 7 2025 Residential Energy End-Use Expenditure Splits, by Fuel Type ($2010 Billion) (1) Natural Petroleum Gas Distil. LPG Kerosene Total Coal Electricity Total Percent Space Heating (2) 39.7 11.5 7.8 19.9 0.0 15.0 74.5 28.6% Space Cooling (3) 0.0 36.2 36.2 13.9% Water Heating 16.0 1.4 1.3 2.7 17.1 35.9 13.8% Lighting 15.2 15.2 5.8% Refrigeration (4) 15.5 15.5 6.0% Electronics (5) 12.0 12.0 4.6% Wet Cleaning (6) 0.8 9.8 10.5 4.1% Cooking 2.7 0.8 0.8 4.3 7.8 3.0% Computers 7.7 7.7 2.9% Other (7) 0.0 6.4 6.4 38.7 45.0 17.3% Total 59.1 12.9 16.3 29.8 0.0 171.3 260.3 100% Note(s): Source(s): 0.6 0.6 1) Expenditures include coal and exclude wood. 2) Includes furnace fans ($4.7 billion). 3) Fan energy use included. 4) Includes refrigerators ($12.7 billion) and freezers ($2.8 billion). 5) Includes color televisions ($12 billion). 6) Includes clothes washers ($0.8 billion), natural gas

116

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book (EERE)

6 6 2015 Residential Energy End-Use Expenditure Splits, by Fuel Type ($2010 Billion) (1) Natural Petroleum Gas Distil. LPG Kerosene Total Coal Electricity Total Percent Space Heating (2) 35.0 13.0 8.1 21.6 0.0 14.0 70.6 29.2% Space Cooling (3) 0.0 33.8 33.8 14.0% Water Heating 13.5 1.9 1.5 3.4 15.8 32.7 13.5% Lighting 17.6 17.6 7.3% Refrigeration (4) 15.0 15.0 6.2% Electronics (5) 10.9 10.9 4.5% Wet Cleaning (6) 0.6 10.8 11.4 4.7% Cooking 2.2 0.9 0.9 3.8 6.8 2.8% Computers 6.3 6.3 2.6% Other (7) 0.0 5.2 5.2 31.3 36.5 15.1% Total 51.3 14.9 15.7 31.1 0.0 159.3 241.7 100% Note(s): Source(s): 0.6 0.6 1) Expenditures include coal and exclude wood. 2) Includes furnace fans ($4.6 billion). 3) Fan energy use included. 4) Includes refrigerators ($12.3 billion) and freezers ($2.8 billion). 5) Includes color televisions ($10.9 billion). 6) Includes clothes washers ($1.1 billion), natural gas

117

Dynamic Simulation and Analysis of Heating Energy Consumption in a Residential Building  

E-Print Network (OSTI)

In winter, much of the building energy is used for heating in the north region of China. In this study, the heating energy consumption of a residential building in Tianjin during a heating period was simulated by using the EnergyPlus energy simulation program. The study showed that the heat loss from exterior walls, exterior windows and infiltration took three main parts of the total heat loss. Furthermore, the results of on-site measurement are presented with the conclusion that the EnergyPlus program provides sufficient accuracy for this energy simulation application.

Liu, J.; Yang, M.; Zhao, X.; Zhu, N.

2006-01-01T23:59:59.000Z

118

Summary of Gaps and Barriers for Implementing Residential Building Energy Efficiency Strategies  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Gaps and Gaps and Barriers for Implementing Residential Building Energy Efficiency Strategies 2010 Residential Buildings Energy Efficiency Meeting Denver, Colorado - July 20 - 22, 2010 August 2010 Prepared by the National Renewable Energy Laboratory For the U.S. Department of Energy Building Technologies Program NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned

119

ASHRAE Standard 90.1 1999 Energy Conservation in Non-Residential Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

ASHRAE Standard 90.1 1999 Energy Conservation in Non-Residential Buildings ASHRAE Standard 90.1 1999 Energy Conservation in Non-Residential Buildings Speaker(s): Steve Taylor Date: April 20, 2000 - 12:00pm Location: Bldg. 90 Seminar Host/Point of Contact: Julie Osborn Steve Taylor, the principal of Taylor Engineering, will be providing an overview of the envelope, lighting, and HVAC requirements of Standard 90.1. Mr. Taylor is a registered mechanical engineer specializing in HVAC system design, control system design, indoor air quality engineering, computerized building energy analysis, and HVAC system commissioning. He graduated from Stanford University with a BS in Physics and a MS in Mechanical Engineering and has over 20 years of commercial HVAC system design and construction experience. He was the primary author of the HVAC

120

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book (EERE)

Residential Energy Prices, by Year and Major Fuel Type ($2010 per Million Btu) Electricity Natural Gas Petroleum (1) Avg. 1980 36.40 8.35 16.77 17.64 1981 38.50 8.88 18.35 19.09 1982 40.15 10.08 17.28 19.98 1983 40.43 11.30 16.08 21.00 1984 38.80 11.02 15.61 20.20 1985 38.92 10.68 14.61 20.10 1986 38.24 9.98 11.88 19.38 1987 37.29 9.22 11.23 18.73 1988 36.22 8.80 10.83 18.02 1989 35.67 8.71 11.96 17.93 1990 35.19 8.63 13.27 18.64 1991 34.88 8.38 12.49 18.31 1992 34.79 8.28 11.23 17.76 1993 34.52 8.47 10.75 17.76 1994 34.04 8.63 10.63 17.87 1995 33.43 8.00 10.33 17.50 1996 32.63 8.21 11.70 17.28 1997 32.34 8.83 11.47 17.69 1998 31.33 8.55 9.96 17.73 1999 30.52 8.29 10.13 17.09 2000 30.13 9.54 14.18 18.06 2001 30.71 11.50 13.98 19.38 2002 29.73 9.24 12.26 17.89 2003 30.05 10.87 14.21 18.88 2004 29.98 11.97 15.54 19.76 2005 30.64 13.66 18.93 21.50 2006 32.67 14.30 21.06 23.34 2007 32.50

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Buildings Energy Data Book: 2.2 Residential Sector Characteristics  

Buildings Energy Data Book (EERE)

3 3 Share of Total U.S. Households, by Census Region, Division, and Vintage, as of 2005 Prior to 1950 to 1970 to 1980 to 1990 to 2000 to Region 1950 1969 1979 1989 1999 2005 Northeast 6.7% 5.2% 2.4% 2.1% 1.3% 0.8% 18.5% New England 2.1% 1.2% 0.5% 0.5% 0.3% 0.3% 4.9% Middle Atlantic 4.6% 4.0% 1.9% 1.6% 1.0% 0.5% 13.6% Midwest 5.7% 5.8% 3.6% 2.5% 3.7% 1.7% 23.0% East North Central 4.3% 3.9% 2.7% 1.8% 2.1% 1.1% 16.0% West North Central 1.4% 1.9% 0.9% 0.7% 1.6% 0.6% 7.1% South 4.0% 6.9% 6.4% 7.5% 7.5% 4.3% 36.6% South Atlantic 2.0% 3.4% 3.5% 4.2% 4.3% 2.2% 17.4% East South Central 0.9% 1.3% 0.9% 1.0% 1.3% 0.7% 6.2% West South Central 1.2% 2.3% 4.7% 2.2% 1.8% 1.4% 13.6% West 3.4% 4.6% 4.5% 4.6% 3.1% 1.5% 21.8% Mountain 0.7% 1.2% 1.3% 1.5% 1.3% 0.9% 6.8% Pacific 2.8% 3.4% 3.3% 3.1% 1.8% 0.6% 15.0% United States 19.9% 22.5% 17.0% 16.7% 15.6% 8.3% 100% Source(s): All Vintages EIA, 2005 Residential Energy Consumption Survey, Oct. 2008, Table HC10

122

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book (EERE)

3 3 Building Type Pre-1995 1995-2005 Pre-1995 1995-2005 Pre-1995 1995-2005 Single-Family 38.4 44.9 102.7 106.2 38.5 35.5 Detached 37.9 44.7 104.5 107.8 38.8 35.4 Attached 43.8 55.5 86.9 85.1 34.2 37.6 Multi-Family 63.8 58.7 58.3 49.2 27.2 24.3 2 to 4 units 69.0 55.1 70.7 59.4 29.5 25.0 5 or more units 61.5 59.6 53.6 47.2 26.3 24.2 Mobile Homes 82.4 57.1 69.6 74.5 29.7 25.2 Note(s): Source(s): 2005 Residential Delivered Energy Consumption Intensities, by Principal Building Type and Vintage Per Square Foot (thousand Btu) (1) Per Household (million Btu) Per Household Member (million Btu) 1) Energy consumption per square foot was calculated using estimates of average heated floor space per household. According to the 2005 Residential Energy Consumption Survey (RECS), the average heated floor space per household in the U.S. was 1,618 square feet. Average

123

Environmental assessment in support of proposed voluntary energy conservation standard for new residential buildings  

Science Conference Proceedings (OSTI)

The objective of this environmental assessment (EA) is to identify the potential environmental impacts that could result from the proposed voluntary residential standard (VOLRES) on private sector construction of new residential buildings. 49 refs., 15 tabs.

Hadley, D.L.; Parker, G.B.; Callaway, J.W.; Marsh, S.J.; Roop, J.M.; Taylor, Z.T.

1989-06-01T23:59:59.000Z

124

Residential Codes and Standards | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

houses, which are built in a factory and transported to the home site. ICC ASHRAE International Energy Conservation Code The International Energy Conservation Code...

125

Buildings Energy Data Book: 2.2 Residential Sector Characteristics  

Buildings Energy Data Book (EERE)

7 7 Characteristics of a Typical Single-Family Home (1) Year Built | Building Equipment Fuel Age (5) Occupants 3 | Space Heating Natural Gas 12 Floorspace | Water Heating Natural Gas 8 Heated Floorspace (SF) 1,934 | Space Cooling 8 Cooled Floorspace (SF) 1,495 | Garage 2-Car | Stories 1 | Appliances Size Age (5) Foundation Concrete Slab | Refrigerator 19 Cubic Feet 8 Total Rooms (2) 6 | Clothes Dryer Bedrooms 3 | Clothes Washer Other Rooms 3 | Range/Oven Full Bathroom 2 | Microwave Oven Half Bathroom 0 | Dishwasher Windows | Color Televisions 3 Area (3) 222 | Ceiling Fans 3 Number (4) 15 | Computer 2 Type Double-Pane | Printer Insulation: Well or Adequate | Note(s): Source(s): 2-Door Top and Bottom Electric Top-Loading Electric 1) This is a weighted-average house that has combined characteristics of the Nation's stock homes. Although the population of homes with

126

Buildings Energy Data Book: 2.5 Residential Construction and...  

Buildings Energy Data Book (EERE)

and EIA, Annual Energy Review 2010, Oct. 2011, Appendix D, p. 353 for GDP and price deflators. 242.1 14,639 143.2 14,254 137.1 14,660 525.5 13,986 387.3 14,359 247.4...

127

Potential Job Creation in Nevada as a Result of Adopting New Residential Building Energy Codes  

SciTech Connect

Are there advantages to states that adopt the most recent model building energy codes other than saving energy? For example, can the construction activity and energy savings associated with code-compliant housing units become significant sources of job creation for states if new building energy codes are adopted to cover residential construction? , The U.S. Department of Energy (DOE) Building Energy Codes Program (BECP) asked Pacific Northwest National Laboratory (PNNL) to research and ascertain whether jobs would be created in individual states based on their adoption of model building energy codes. Each state in the country is dealing with high levels of unemployment, so job creation has become a top priority. Many programs have been created to combat unemployment with various degrees of failure and success. At the same time, many states still have not yet adopted the most current versions of the International Energy Conservation Code (IECC) model building energy code, when doing so could be a very effective tool in creating jobs to assist states in recovering from this economic downturn.

Scott, Michael J.; Niemeyer, Jackie M.

2013-09-01T23:59:59.000Z

128

Potential Job Creation in Rhode Island as a Result of Adopting New Residential Building Energy Codes  

Science Conference Proceedings (OSTI)

Are there advantages to states that adopt the most recent model building energy codes other than saving energy? For example, can the construction activity and energy savings associated with code-compliant housing units become significant sources of job creation for states if new building energy codes are adopted to cover residential construction? , The U.S. Department of Energy (DOE) Building Energy Codes Program (BECP) asked Pacific Northwest National Laboratory (PNNL) to research and ascertain whether jobs would be created in individual states based on their adoption of model building energy codes. Each state in the country is dealing with high levels of unemployment, so job creation has become a top priority. Many programs have been created to combat unemployment with various degrees of failure and success. At the same time, many states still have not yet adopted the most current versions of the International Energy Conservation Code (IECC) model building energy code, when doing so could be a very effective tool in creating jobs to assist states in recovering from this economic downturn.

Scott, Michael J.; Niemeyer, Jackie M.

2013-09-01T23:59:59.000Z

129

Potential Job Creation in Minnesota as a Result of Adopting New Residential Building Energy Codes  

SciTech Connect

Are there advantages to states that adopt the most recent model building energy codes other than saving energy? For example, can the construction activity and energy savings associated with code-compliant housing units become significant sources of job creation for states if new building energy codes are adopted to cover residential construction? , The U.S. Department of Energy (DOE) Building Energy Codes Program (BECP) asked Pacific Northwest National Laboratory (PNNL) to research and ascertain whether jobs would be created in individual states based on their adoption of model building energy codes. Each state in the country is dealing with high levels of unemployment, so job creation has become a top priority. Many programs have been created to combat unemployment with various degrees of failure and success. At the same time, many states still have not yet adopted the most current versions of the International Energy Conservation Code (IECC) model building energy code, when doing so could be a very effective tool in creating jobs to assist states in recovering from this economic downturn.

Scott, Michael J.; Niemeyer, Jackie M.

2013-09-01T23:59:59.000Z

130

Potential Job Creation in Tennessee as a Result of Adopting New Residential Building Energy Codes  

Science Conference Proceedings (OSTI)

Are there advantages to states that adopt the most recent model building energy codes other than saving energy? For example, can the construction activity and energy savings associated with code-compliant housing units become significant sources of job creation for states if new building energy codes are adopted to cover residential construction? , The U.S. Department of Energy (DOE) Building Energy Codes Program (BECP) asked Pacific Northwest National Laboratory (PNNL) to research and ascertain whether jobs would be created in individual states based on their adoption of model building energy codes. Each state in the country is dealing with high levels of unemployment, so job creation has become a top priority. Many programs have been created to combat unemployment with various degrees of failure and success. At the same time, many states still have not yet adopted the most current versions of the International Energy Conservation Code (IECC) model building energy code, when doing so could be a very effective tool in creating jobs to assist states in recovering from this economic downturn.

Scott, Michael J.; Niemeyer, Jackie M.

2013-09-01T23:59:59.000Z

131

Energy performance of evacuated glazings in residential buildings  

SciTech Connect

This paper presents the results of a study investigating the energy performance of evacuated glazings or glazings which maintain a vacuum between two panes of glass. Their performance is determined by comparing results to prototype highly insulated superwindows as well as a more conventional. insulating glass unit with a low-E coating and argon gas fill. We used the DOE2.1E energy analysis simulation program to analyze the annual and hourly heating energy use due to the windows of a prototypical single-story house located in Madison, Wisconsin. Cooling energy performance was also investigated. Our results show that for highly insulating windows, the solar heat gain coefficient is as important as the window`s U-factor in determining heating performance for window orientations facing west-south-east. For other orientations in which there is not much direct solar radiation, the window`s U-factor primarily governs performance. The vacuum glazings had lower heating requirements than the superwindows for most window orientations. The conventional low-E window outperformed the superwindows for southwest-south-southeast orientations These performance differences are directly related to the solar heat gain coefficients of the various windows analyzed. The cooling performance of the windows was inversely related to the heating performance. The lower solar heat gain coefficients of the superwindows resulted in the best cooling performance. However, we were able to mitigate the cooling differences of the windows by using an interior shading device that reduced the amount of solar gain at appropriate times.

Sullivan, R.; Beck, F.; arasteh, D.; Selkowitz, S.

1995-09-01T23:59:59.000Z

132

Energy performance of evacuated glazings in residential buildings  

SciTech Connect

This paper presents the results of a study investigating the energy performance of evacuated glazings or glazings which maintain a vacuum between two panes of glass. Their performance is determined by comparing results to prototype highly insulated superwindows as well as a more conventional insulating glass unit with a low-E coating and argon gas fill. The authors used the DOE-2.1E energy analysis simulation program to analyze the annual and hourly heating energy use due to the windows of a prototypical single-story house located in Madison, Wisconsin. Cooling energy performance was also investigated. The results show that for highly insulating windows, the solar heat gain coefficient is as important as the window`s U-factor in determining heating performance for window orientations facing west-south-east. For other orientations in which there is not much direct solar radiation, the window`s U-factor primarily governs performance. The vacuum glazings had lower heating requirements than the superwindows for most window orientations. The conventional low-E window outperformed the superwindows for southwest-south-southeast orientations. These performance differences are directly related to the solar heat gain coefficients of the various windows analyzed. The cooling performance of the windows was inversely related to the heating performance. The lower solar heat gain coefficients of the superwindows resulted in the best cooling performance. However, the authors were able to mitigate the cooling differences of the windows by using an interior shading device that reduced the amount of solar gain at appropriate times.

Sullivan, R.; Beck, F.; Arasteh, D.; Selkowitz, S.

1996-10-01T23:59:59.000Z

133

Air Barriers for Residential and Commercial Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Air Barriers for Residential and Air Barriers for Residential and Commercial Buildings Diana Hun, PhD Oak Ridge National Laboratory dehun@ornl.gov 865-574-5139 April 4, 2013 BTO Program Peer Review 2 | Building Technologies Office eere.energy.gov Problem Statement & Project Focus - Air leakage is a significant contributor to HVAC loads - ~50% in residential buildings (Sherman and Matson 1997) - ~33% of heating loads in office buildings (Emmerich et al. 2005) - Airtightness of buildings listed in BTO prioritization tool

134

Air Barriers for Residential and Commercial Buildings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Air Barriers for Residential and Air Barriers for Residential and Commercial Buildings Diana Hun, PhD Oak Ridge National Laboratory dehun@ornl.gov 865-574-5139 April 4, 2013 BTO Program Peer Review 2 | Building Technologies Office eere.energy.gov Problem Statement & Project Focus - Air leakage is a significant contributor to HVAC loads - ~50% in residential buildings (Sherman and Matson 1997) - ~33% of heating loads in office buildings (Emmerich et al. 2005) - Airtightness of buildings listed in BTO prioritization tool

135

Buildings Energy Data Book: 2.2 Residential Sector Characteristics  

Buildings Energy Data Book (EERE)

1 1 Total Number of Households and Buildings, Floorspace, and Household Size, by Year 1980 80 N.A. 227 2.9 1981 83 N.A. 229 2.8 1982 84 N.A. 232 2.8 1983 85 N.A. 234 2.8 1984 86 N.A. 236 2.7 1985 88 N.A. 238 2.7 1986 89 N.A. 240 2.7 1987 91 N.A. 242 2.7 1988 92 N.A. 244 2.7 1989 93 N.A. 247 2.6 1990 94 N.A. 250 2.6 1991 95 N.A. 253 2.7 1992 96 N.A. 257 2.7 1993 98 N.A. 260 2.7 1994 99 N.A. 263 2.7 1995 100 N.A. 266 2.7 1996 101 N.A. 269 2.7 1997 102 N.A. 273 2.7 1998 104 N.A. 276 2.7 1999 105 N.A. 279 2.7 2000 106 N.A. 282 2.7 2001 107 2% 285 2.7 2002 105 3% 288 2.7 2003 106 5% 290 2.8 2004 107 7% 293 2.7 2005 109 9% 296 2.7 2006 110 11% 299 2.7 2007 110 12% 302 2.7 2008 111 13% 304 2.8 2009 111 13% 307 2.8 2010 114 14% 310 2.7 2011 115 14% 313 2.7 2012 116 15% 316 2.7 2013 117 16% 319 2.7 2014 118 17% 322 2.7 2015 119 18% 326 2.7 2016 120 19% 329 2.7 2017 122 21% 332 2.7 2018 123 22% 335 2.7 2019 125 23% 338 2.7 2020 126 25% 341 2.7 2021 127 26% 345

136

Energy and air quality implications of passive stack ventilation in residential buildings  

SciTech Connect

Ventilation requires energy to transport and condition the incoming air. The energy consumption for ventilation in residential buildings depends on the ventilation rate required to maintain an acceptable indoor air quality. Historically, U.S. residential buildings relied on natural infiltration to provide sufficient ventilation, but as homes get tighter, designed ventilation systems are more frequently required particularly for new energy efficient homes and retrofitted homes. ASHRAE Standard 62.2 is used to specify the minimum ventilation rate required in residential buildings and compliance is normally achieved with fully mechanical whole-house systems; however, alternative methods may be used to provide the required ventilation when their air quality equivalency has been proven. One appealing method is the use of passive stack ventilation systems. They have been used for centuries to ventilate buildings and are often used in ventilation regulations in other countries. Passive stacks are appealing because they require no fans or electrical supply (which could lead to lower cost) and do not require maintenance (thus being more robust and reliable). The downside to passive stacks is that there is little control of ventilation air flow rates because they rely on stack and wind effects that depend on local time-varying weather. In this study we looked at how passive stacks might be used in different California climates and investigated control methods that can be used to optimize indoor air quality and energy use. The results showed that passive stacks can be used to provide acceptable indoor air quality per ASHRAE 62.2 with the potential to save energy provided that they are sized appropriately and flow controllers are used to limit over-ventilation.

Mortensen, Dorthe Kragsig; Walker, Iain S.; Sherman, Max

2011-01-01T23:59:59.000Z

137

Buildings Energy Data Book: 2.3 Residential Sector Expenditures  

Buildings Energy Data Book (EERE)

9 9 Average Annual Energy Expenditures per Household, by Year ($2010) Year 1980 1,991 1981 1,981 1982 2,058 1983 2,082 1984 2,067 1985 2,012 1986 1,898 1987 1,846 1988 1,849 1989 1,848 1990 1,785 1991 1,784 1992 1,729 1993 1,797 1994 1,772 1995 1,727 1996 1,800 1997 1,761 1998 1,676 1999 1,659 2000 1,824 2001 1,900 2002 1,830 2003 1,978 2004 2,018 2005 2,175 2006 2,184 2007 2,230 2008 2,347 2009 2,173 2010 2,201 2011 2,185 2012 2,123 2013 2,056 2014 2,032 2015 2,030 2016 2,007 2017 1,992 2018 1,982 2019 1,973 2020 1,963 2021 1,961 2022 1,964 2023 1,962 2024 1,959 2025 1,957 2026 1,959 2027 1,960 2028 1,953 2029 1,938 2030 1,932 2031 1,937 2032 1,946 2033 1,956 2034 1,967 2035 1,978 Source(s): Average Expenditure EIA, State Energy Data 2009: Prices and Expenditures, Jun. 2011 for 1980-2009; EIA, Annual Energy Outlook 2012 Early Release, Jan. 2012, Table A2, p. 3-

138

Buildings Energy Data Book: 2.6 Residential Home Improvement  

Buildings Energy Data Book (EERE)

7 7 2009 Home Improvement Spending by Household Income ($2010) Income Under $40,000 $40-79,999 $80-119,999 120,000 and Over Note(s): Source(s): 13,005 4,097 16,531 67,731 Home improvements include room additions, remodeling, replacements of household systems and appliances, porches and garages, additions and replacements of roofing, siding, window/doors, insulation, flooring/paneling/ceiling, and disaster repairs. Joint Center for Housing Studies of Harvard University, A New Decade of Growth for Remodeling, 2011, Table A-3, pg. 29; EIA, Annual Energy Review 2010, Oct. 2011, Appendix D, p. 353 for GDP and price deflators. 23,178 6,545 6,841 44,772 14,051 4,299 9,189 39,505 (thousand) (thousand) ($) ($million) 24,675 6,113 5,697 34,825 Number of Homeowners Average Total Homeowners

139

Fact Sheet: Better Buildings Residential Network  

NLE Websites -- All DOE Office Websites (Extended Search)

Sheet Sheet BETTER BUILDINGS RESIDENTIAL NETWORK Learn more at betterbuildings.energy.gov/bbrn What Is the Residential Network? The Better Buildings Residential Network connects energy efficiency programs and partners to share best practices and learn from one another to dramatically increase the number of American homes that are energy efficient. Since 2010, the U.S. Department of Energy (DOE), local Better Buildings Neighborhood Program partners, and Home Performance with ENERGY STAR ® Sponsors have leveraged over $1 billion in federal funding and local resources to build more energy-efficient communities. DOE is now expanding this network of residential energy efficiency programs and partners to new members. Who Should Join? Network membership is open to all organizations that are committed to accelerating the pace of energy

140

Energy conservation standards for new federal residential buildings: A decision analysis study using relative value discounting  

SciTech Connect

This report presents a reassessment of the proposed standard for energy conservation in new federal residential buildings. The analysis uses the data presented in the report, Economic Analysis: In Support of Interim Energy Conservation Standards for New Federal Residential Buildings (June 1988)-to be referred to as the EASIECS report. The reassessment differs from that report in several respects. In modeling factual information, it uses more recent forecasts of future energy prices and it uses data from the Bureau of the Census in order to estimate the distribution of lifetimes of residential buildings rather than assuming a hypothetical 25-year lifetime. In modeling social preferences decision analysis techniques are used in order to examine issues of public values that often are not included in traditional cost-benefit analyses. The present report concludes that the public would benefit from the proposed standard. Several issues of public values regarding energy use are illustrated with methods to include them in a formal analysis of a proposed energy policy. The first issue places a value on costs and benefits that will occur in the future as an irreversible consequence of current policy choices. This report discusses an alternative method, called relative value discounting which permits flexible discounting of future events-and the possibility of placing greater values on future events. The second issue places a value on the indirect benefits of energy savings so that benefits accrue to everyone rather than only to the person who saves the energy. This report includes non-zero estimates of the indirect benefits. The third issue is how the costs and benefits discussed in a public policy evaluation should be compared. In summary, selection of individual projects with larger benefit to cost ratios leads to a portfolio of projects with the maximum benefit to cost difference. 30 refs., 6 figs., 16 tabs. (JF)

Harvey, C. (Houston Univ., TX (USA). Coll. of Business Administration); Merkhofer, M.M.; Hamm, G.L. (Applied Decision Analysis, Inc., Menlo Park, CA (USA))

1990-07-02T23:59:59.000Z

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Cold Climates  

Science Conference Proceedings (OSTI)

The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in Cold Climates on a cost-neutral basis.

Building Industry Research Alliance (BIRA); Building Science Consortium (BSC); Consortium for Advanced Residential Buildings (CARB); Florida Solar Energy Center (FSEC); IBACOS; National Renewable Energy Laboratory (NREL)

2006-08-01T23:59:59.000Z

142

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings Title Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings Publication Type Report LBNL Report Number LBNL-5193E Year of Publication 2011 Authors Garbesi, Karina, Vagelis Vossos, Alan H. Sanstad, and Gabriel Burch Document Number LBNL-5193E Pagination 59 Date Published October Publisher Lawrence Berkeley National Laboratory City Berkeley Abstract An increasing number of energy efficient appliances operate on direct current (DC) internally, offering the potential to use DC from renewable energy systems directly and avoiding the losses inherent in converting power to alternating current (AC) and back. This paper investigates that potential for net-metered residences with on-site photovoltaics (PV) by modeling the net power draw of the 'direct-DC house' with respect to today's typical configuration, assuming identical DC-internal loads. Power draws were modeled for houses in 14 U.S. cities, using hourly, simulated PV-system output and residential loads. The latter were adjusted to reflect a 33% load reduction, representative of the most efficient DC-internal technology, based on an analysis of 32 electricity end-uses. The model tested the effect of climate, electric vehicle (EV) loads, electricity storage, and load shifting on electricity savings; a sensitivity analysis was conducted to determine how future changes in the efficiencies of power system components might affect savings potential. Based on this work, we estimate that net-metered PV residences could save 5% of their total electricity load for houses without storage and 14% for houses with storage. Based on residential PV penetration projections for year 2035 obtained from the National Energy Modeling System (2.7% for the reference case and 11.2% for the extended policy case), direct-DC could save the nation 10 trillion Btu (without storage) or 40 trillion Btu (with storage). Shifting the cooling load by two hours earlier in the day (pre-cooling) has negligible benefits for energy savings. Direct-DC provides no energy savings benefits for EV charging, to the extent that charging occurs at night. However, if charging occurred during the day, for example with employees charging while at work, the benefits would be large. Direct-DC energy savings are sensitive to power system and appliance conversion efficiencies but are not significantly influenced by climate. While direct-DC for residential applications will most likely arise as a spin-off of developments in the commercial sector-because of lower barriers to market entry and larger energy benefits resulting from the higher coincidence between load and insolation-this paper demonstrates that there are substantial benefits in the residential sector as well. Among residential applications, space cooling derives the largest energy savings from being delivered by a direct-DC system. It is the largest load for the average residence on a national basis and is particularly so in high-load regions. It is also the load with highest solar coincidence.

143

Renewable Energy and Energy Efficiency Technologies in Residential Building Codes: June 15, 1998 to September 15, 1998  

SciTech Connect

This report is an attempt to describe the building code requirements and impediments to the application of EE and RE technologies in residential buildings. Several modern model building codes were reviewed. These are representative of the codes that will be adopted by most locations in the coming years. The codes reviewed for this report include: International Residential Code, First Draft, April 1998; International Energy Conservation Code, 1998; International Mechanical Code, 1998; International Plumbing Code, 1997; International Fuel Gas Code, 1997; National Electrical Code, 1996. These codes were reviewed as to their application to (1) PV systems in buildings and building-integrated PV systems and (2) active solar domestic hot water and space-heating systems. A discussion of general code issues that impact these technologies is also included. Examples of this are solar access and sustainability.

Wortman, D.; Echo-Hawk, L.

2005-02-01T23:59:59.000Z

144

EA-1926: Energy Efficiency Design Standards for New Federal Low-Rise Residential Buildings (RIN# 1904-AC61)  

Energy.gov (U.S. Department of Energy (DOE))

This EA will evaluate the potential environmental impacts of implementing the provisions in the Energy Conservation and Production Act (ECPA) that require DOE to update the baseline Federal energy efficiency performance standards for the construction of new Federal buildings, including low-rise residential buildings.

145

IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS AT STATE LEVELBUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS AT STATE LEVEL Executive Summary  

E-Print Network (OSTI)

The Building Energy Codes Program (BECP) recently conducted a nationwide residential energy code analysis for the U.S. Department of Energy (DOE). The analysis compares the requirements of the 2009 International Energy Conservation Code ® (IECC) with the residential code—or typical construction practice in the absence of a code—in most states as of June 2009. The results, which include estimated typical energy savings of updating each state’s code to the 2009 IECC, are provided in this report in chapters specific to each state. An overview of the 2009 IECC and its major chapters, as well as a brief comparison to previous versions, is provided as introductory information. The IECC is then briefly compared to the International Residential Code, which contains a chapter with energy efficiency requirements that are very similar to the IECC. Several states have either not adopted a mandatory energy code or developed their own codes which have minimal or no connection to the IECC. The latter—including California, Florida, Oregon, and Washington— were not included in this analysis as the codes in these states would be difficult to appropriately compare to the 2009 IECC and most of these states have energy offices that have already assessed the IECC on their own. Chapter 2 is dedicated to outlining some of the major code differences in the 2009 IECC that are not contained in any previous version of the code, and to which much of the energy savings of the 2009 IECC compared to previous versions is attributable. These energy saving differences are described in further detail in the report,

unknown authors

2009-01-01T23:59:59.000Z

146

TOPIC Brief BUILDING TECHNOLOGIES PROGRAM Lighting: Residential...  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting: Residential and Commercial Requirements TOPIC BRIEF 1 Lighting: Residential and Commercial Requirements Residential Lighting Requirements The 2009 International Energy...

147

Environmental Assessment for Direct Final Rule, 10 CFR 434, ÂŤEnergy Standards for New Federal Commercial and High-Rise Multi-FamilyResidential BuildingsÂŽ and 10 CFR 435, ÂŤEnergy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings"  

NLE Websites -- All DOE Office Websites (Extended Search)

Proposed Rule, 10 CFR 433, Proposed Rule, 10 CFR 433, "Sustainable Design and Energy Efficiency Standards for New Federal Commercial and High-Rise Multi-Family Residential Buildings" and 10 CFR 435, "Sustainable Design and Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings" (DOE/EA-1463) 2 SUMMARY The U.S. Department of Energy (DOE) has prepared this Environmental Assessment (EA) for DOE's Proposed Rule, 10 CFR 433, "Sustainable Design and Energy Efficiency Standards for the Design and Construction of New Federal Commercial and High-Rise Multi-Family Residential Buildings" and 10 CFR 435, "Sustainable Design and Energy Efficiency Standards for New Federal Residential Low- Rise Residential Buildings". Section 305(a) of the Energy Conservation and Production

148

Environmental Assessment for Direct Final Rule, 10 CFR 434, ÂŤEnergy Standards for New Federal Commercial and High-Rise Multi-FamilyResidential BuildingsÂŽ and 10 CFR 435, ÂŤEnergy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings"  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Proposed Rule, 10 CFR 433, Proposed Rule, 10 CFR 433, "Sustainable Design and Energy Efficiency Standards for New Federal Commercial and High-Rise Multi-Family Residential Buildings" and 10 CFR 435, "Sustainable Design and Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings" (DOE/EA-1463) 2 SUMMARY The U.S. Department of Energy (DOE) has prepared this Environmental Assessment (EA) for DOE's Proposed Rule, 10 CFR 433, "Sustainable Design and Energy Efficiency Standards for the Design and Construction of New Federal Commercial and High-Rise Multi-Family Residential Buildings" and 10 CFR 435, "Sustainable Design and Energy Efficiency Standards for New Federal Residential Low- Rise Residential Buildings". Section 305(a) of the Energy Conservation and Production

149

Energy Benchmarking And Energy Saving Assessment In High-Rise Multi-Unit Residential Buildings.  

E-Print Network (OSTI)

??The purpose of energy benchmarking is to promote efficient use of energy. Knowing that the energy used by a building is excessive is the first… (more)

Huang, Yirong

2012-01-01T23:59:59.000Z

150

Window-Related Energy Consumption in the US Residential and Commercial Building Stock  

E-Print Network (OSTI)

to Estimate Window % of Space Conditioning Use Original LBNLfactors to estimate space conditioning energy consumptionof Energy, in 2003 space conditioning in residential and

Apte, Joshua; Arasteh, Dariush

2008-01-01T23:59:59.000Z

151

Window-Related Energy Consumption in the US Residential and Commercial Building Stock  

NLE Websites -- All DOE Office Websites (Extended Search)

Window-Related Energy Consumption in the US Window-Related Energy Consumption in the US Residential and Commercial Building Stock Joshua Apte and Dariush Arasteh, Lawrence Berkeley National Laboratory LBNL-60146 Abstract We present a simple spreadsheet-based tool for estimating window-related energy consumption in the United States. Using available data on the properties of the installed US window stock, we estimate that windows are responsible for 2.15 quadrillion Btu (Quads) of heating energy consumption and 1.48 Quads of cooling energy consumption annually. We develop estimates of average U-factor and SHGC for current window sales. We estimate that a complete replacement of the installed window stock with these products would result in energy savings of approximately 1.2 quads. We demonstrate

152

Building Energy Code | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Building Energy Code Building Energy Code Eligibility Low-Income Residential Residential Savings For Heating & Cooling Home Weatherization Construction Commercial Weatherization...

153

Energy Performance Comparison of Heating and Air Conditioning Systems for Multi-Family Residential Buildings  

SciTech Connect

The type of heating, ventilation and air conditioning (HVAC) system has a large impact on the heating and cooling energy consumption in multifamily residential buildings. This paper compares the energy performance of three HVAC systems: a direct expansion (DX) split system, a split air source heat pump (ASHP) system, and a closed-loop water source heat pump (WSHP) system with a boiler and an evaporative fluid cooler as the central heating and cooling source. All three systems use gas furnace for heating or heating backup. The comparison is made in a number of scenarios including different climate conditions, system operation schemes and applicable building codes. It is found that with the minimum code-compliant equipment efficiency, ASHP performs the best among all scenarios except in extremely code climates. WSHP tends to perform better than the split DX system in cold climates but worse in hot climates.

Wang, Weimin; Zhang, Jian; Jiang, Wei; Liu, Bing

2011-07-31T23:59:59.000Z

154

Methodology for Residential Building Energy Simulations Implemented in the International Code Compliance Calculator (IC3)  

E-Print Network (OSTI)

Since 2001, Texas has been proactive in initiating clean air and energy efficiency in building policies. The Texas Emissions Reduction Plan legislation (SB 5, 77TH Leg., 2001) mandates statewide adoption of energy codes, creates a 5% annual energy savings goal for public facilities in affected counties through 2007 and provides approximately $150 million in cash incentives for clean diesel emissions grants and energy research. The Texas Legislation extended this annual electric reduction goal in public facilities through 2013. Texas was the first state in the nation to create NOx emissions reduction credits for energy efficiency and renewable energy through the State Implementation Plan under the Federal Clean Air Act. This paper presents the methodology for calculating the energy usage from a proposed residential house and the corresponding 2001 International Energy Conservation Code baseline house. This methodology is applied in the International Code Compliance Calculator, which is a publicly accessible web-based energy code compliance software developed by the Energy Systems Laboratory based on the Texas Building Energy Performance Standards. This calculator evaluates and certifies above-code compliance for homes in Texas. It also calculates NOx, SOx and CO2 emissions reductions from the energy savings of the proposed house for the electric utility associated with the user using the data from the Emissions and Generation Resource Integrated Database provided by U.S. Environmental Protection Agency.

Liu, Z.; Mukhopadhyay, J.; Malhotra, M.; Haberl, J.; Gilman, D.; Montgomery, C.; McKelvey, K.; Culp, C.; Yazdani, B.

2008-12-01T23:59:59.000Z

155

Residential | Open Energy Information  

Open Energy Info (EERE)

Residential Residential Jump to: navigation, search Click to return to AEO2011 page AEO2011 Data From AEO2011 report . Market Trends In the AEO2011 Reference case, residential energy use per capita declines by 17.0 percent from 2009 to 2035 (Figure 58). Delivered energy use stays relatively constant while population grows by 26.7 percent during the period. Growth in the number of homes and in average square footage leads to increased demand for energy services, which is offset in part by efficiency gains in space heating, water heating, and lighting equipment. Population shifts to warmer and drier climates also reduce energy demand for space heating.[1] Issues in Focus In 2009, the residential and commercial buildings sectors used 19.6 quadrillion Btu of delivered energy, or 21 percent of total U.S. energy

156

Validation Methodology to Allow Simulated Peak Reduction and Energy Performance Analysis of Residential Building Envelope with Phase Change Materials: Preprint  

SciTech Connect

Phase change materials (PCM) represent a potential technology to reduce peak loads and HVAC energy consumption in residential buildings. This paper summarizes NREL efforts to obtain accurate energy simulations when PCMs are modeled in residential buildings: the overall methodology to verify and validate Conduction Finite Difference (CondFD) and PCM algorithms in EnergyPlus is presented in this study. It also shows preliminary results of three residential building enclosure technologies containing PCM: PCM-enhanced insulation, PCM impregnated drywall and thin PCM layers. The results are compared based on predicted peak reduction and energy savings using two algorithms in EnergyPlus: the PCM and Conduction Finite Difference (CondFD) algorithms.

Tabares-Velasco, P. C.; Christensen, C.; Bianchi, M.

2012-08-01T23:59:59.000Z

157

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book (EERE)

4 4 Ownership (1) Owned 54.9 104.5 40.3 78% Rented 77.4 71.7 28.4 22% Public Housing 75.7 62.7 28.7 2% Not Public Housing 77.7 73.0 28.4 19% 100% Note(s): Source(s): 1) Energy consumption per square foot was calculated using estimates of average heated floor space per household. According to the 2005 Residential Energy Consumption Survey (RECS), the average heated floor space per household in the U.S. was 1,618 square feet. Average total floor space, which includes garages, attics and unfinished basements, equaled 2,309 square feet. EIA, 2005 Residential Energy Consumption Survey, Oct. 2008 2005 Residential Delivered Energy Consumption Intensities, by Ownership of Unit Per Square Per Household Per Household Percent of Foot (thousand Btu) (million Btu) Members (million Btu) Total Consumption

158

Building Energy Code | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Building Energy Code Building Energy Code Eligibility Commercial Residential Savings For Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial...

159

Saving energy in occupied buildings: results from the Lawrence Berkeley Laboratory residential data bases  

SciTech Connect

This paper summarizes results to date from the residential portion of the Building Energy Use Compilation and Analysis (BECA) project, comprising findings from several hundred studies of new and retrofitted buildings. The following are discussed for both new and retrofitted homes: (1) energy savings and the range of savings for given types of measures; (2) cost and cost-effectiveness of various measures; and (3) methodology. In existing residences, data compiled from roughly 70 retrofit projects, with sample sizes that range from 1 to 33,000 homes, strongly indicate that retrofits often significantly reduce annual space heating energy consumption. But, results are highly variable. The maximum energy savings from individual measures installed in different households are 3 to 7 times greater than the median value. Nineteen conservation programs sponsored by utilities achieved annual space heat savings of 38.5 million Btu at an average investment level of $1050. Twenty-nine of 215 new homes in our BECA-A database have detailed sub-metered data that permits normalization of space heat loads for both indoor temperature and internal gains. In these homes, the standardized heating energy requirement ranges from 10 to 25 kBtu/ft/sup 2/ over various climatic regions, a value that is roughly 50% less than current building practice.

Goldman, C.A.; Wagner, B.S.

1983-09-01T23:59:59.000Z

160

South Alabama Electric Cooperative - Residential Energy Efficiency...  

Open Energy Info (EERE)

Sector Residential Eligible Technologies Building Insulation, Doors, Heat pumps, Windows, Geothermal Heat Pumps Active Incentive Yes Implementing Sector Utility Energy...

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Measured energy savings from the application of reflective roofsin 2 small non-residential buildings  

SciTech Connect

Energy use and environmental parameters were monitored in two small (14.9 m{sup 2}) non-residential buildings during the summer of 2000. The buildings were initially monitored for about 1 1/2 months to establish a base condition. The roofs of the buildings were then painted with a white coating and the monitoring was continued. The original solar reflectivities of the roofs were about 26%; after the application of roof coatings the reflectivities increased to about 72%. The monitored electricity savings were about 0.5kWh per day (33 Wh/m2 per day). The estimated annual savings are about 125kWh per year (8.4 kWh/m2); at a cost of $0.1/kWh, savings are about $0.86/m2 per year. Obviously, it costs significantly more than this amount to coat the roofs with reflective coating, particularly because of the remote locations of these buildings. However, since the prefabricated roofs are already painted green at the factory, painting them a white (reflective) color would bring no additional cost. Hence, a reflective roof saves energy at no incremental cost.

Akbari, Hashem

2003-01-14T23:59:59.000Z

162

Buildings Energy Data Book: 1.2 Residential Sector Energy Consumption  

Buildings Energy Data Book (EERE)

Residential Sector Energy Consumption March 2012 1.2.9 Implicit Price Deflators (2005 1.00) Year Year Year 1980 0.48 1990 0.72 2000 0.89 1981 0.52 1991 0.75 2001 0.91 1982 0.55...

163

Residential building energy analysis : development and uncertainty assessment of a simplified model  

E-Print Network (OSTI)

Effective design of energy-efficient buildings requires attention to energy issues during the preliminary stages of design. To aid in the early consideration of a building's future energy usage, a simplified building energy ...

Spindler, Henry C. (Henry Carlton), 1970-

1998-01-01T23:59:59.000Z

164

Achieving real transparency : optimizing building energy ratings and disclosure in the U.S. residential sector  

E-Print Network (OSTI)

Residential energy efficiency in the U.S. has the potential to generate significant energy, carbon, and financial savings. Nonetheless, the market of home energy upgrades remains fragmented, and the number of homes being ...

Nadkarni, Nikhil S. (Nikhil Sunil)

2012-01-01T23:59:59.000Z

165

Membership Criteria: Better Buildings Residential network  

NLE Websites -- All DOE Office Websites (Extended Search)

Criteria Criteria BETTER BUILDINGS RESIDENTIAL NETWORK Learn more at betterbuildings.energy.gov/bbrn Better Buildings Residential Network (BBRN) members must be supportive of residential energy efficiency and the mission of the BBRN. Members are expected to be legally incorporated organizations or institutions, rather than individuals, actively engaged in the field of existing residential building energy efficiency with an ability to impact the market. Members should have the ability and capacity to carry out the requirements for membership (i.e., reporting the annual number of upgrades in their sphere of influence, and associated benefits), and actively engage as a member. Members must actively engage in significant work supporting, studying, researching, reporting, and/or

166

Design and thermal modeling of a residential building  

E-Print Network (OSTI)

Recent trends of green energy upgrade in commercial buildings show promise for application to residential houses as well, where there are potential energy-saving benefits of retrofitting the residential heating system from ...

Yeh, Alice Su-Chin

2009-01-01T23:59:59.000Z

167

Window-Related Energy Consumption in the US Residential and Commercial Building Stock  

E-Print Network (OSTI)

DOE Office of Energy Efficiency and Renewable Energy (2005).Office of Energy Efficiency and Renewable Energy. : http://for Energy Efficiency and Renewable Energy, Building

Apte, Joshua; Arasteh, Dariush

2008-01-01T23:59:59.000Z

168

Steven Winter Associates (Consortium for Advanced Residential Buildings) |  

Open Energy Info (EERE)

Winter Associates (Consortium for Advanced Residential Buildings) Winter Associates (Consortium for Advanced Residential Buildings) Jump to: navigation, search Name Steven Winter Associates (Consortium for Advanced Residential Buildings) Place Norwalk, CT Information About Partnership with NREL Partnership with NREL Yes Partnership Type Incubator Partnering Center within NREL Electricity Resources & Building Systems Integration LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! Steven Winter Associates (Consortium for Advanced Residential Buildings) is a company located in Norwalk, CT. References Retrieved from "http://en.openei.org/w/index.php?title=Steven_Winter_Associates_(Consortium_for_Advanced_Residential_Buildings)&oldid=379243" Categories: Clean Energy Organizations

169

Colorado State Certification of Commercial and Residential Building...  

NLE Websites -- All DOE Office Websites (Extended Search)

State Certification of Commercial and Residential Building Energy Codes The State of Colorado provides the following information to certify compliance with Title III of the Energy...

170

Recommendations for 2009 IECC 15% Above Code Energy Efficiency Measures for Residential Buildings  

E-Print Network (OSTI)

In the 79th Legislature (2005) the Energy Systems Laboratory was required to develop three alternative methods for achieving 15% above-code energy savings in new residential, commercial and industrial construction. The Laboratory continues to work closely with code officials, energy raters, manufacturers, state officials and other stakeholders to develop cost effective energy efficiency measures. This report presents detailed information about the recommendations for achieving 15% above-code energy performance, which are based on the 2009 International Energy Conservation Code (IECC), for single-family residences across the State of Texas. To estimate above-code savings (%) of energy efficiency measures, total source energy savings from heating, cooling, lighting, equipment, and DHW were considered for emissions reductions determination. The recommendations were developed for three 2009 IECC climate zones in Texas along with simple payback calculations. This information is useful to homebuilders, utility demand side energy managers, homeowners and others who wish to construct residential buildings that exceed the minimum national energy code requirements. The analysis was performed using an ESL simulation model based on the DOE-2.1e simulation of a 2009 IECC code-compliant, single family residence and the appropriate TMY2 weather files for seventeen counties in Texas for which TMY2 data is available. According to 2009 IECC Climate Zone, seventeen counties were categorized into three climate zones: Climate Zone 2, 3, and 4, and the 2009 IECC code-compliance base-case models were constructed for each climate zone. Two options based on the choice of heating fuel type were considered: (a) natural gas (gas-fired furnace for space heating, and gas water heater for domestic water heating), and (b) electricity (heat pump for space heating, and electric water heater for domestic water heating). A total of eighteen measures based on the energy savings above the base-case house were selected. These measures include building envelope and fenestration, HVAC system, domestic hot water (DHW) system, lighting and renewable options. The implementation costs of each individual measure were also calculated along with simple payback calculations. These measures were then combined to achieve the total source energy savings of the group is 15% above the base-case 2009 code-compliant house. As a result, three example combinations were proposed for each base case ((a) electric/gas house and (b) all-electric house) in each climate zone. Each combination was formed to have a different payback period. Finally, the corresponding emissions savings of each combination were calculated based on the eGrid for Texas.

Kim, H.; Liu, Z.; Baltazar, J. C.; Haberl, J.; Culp, C.; Yazdani, B.; Montgomery, C.

2010-11-01T23:59:59.000Z

171

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book (EERE)

1 1 Type (1) Single-Family: 55.4 106.6 39.4 80.5% Detached 55.0 108.4 39.8 73.9% Attached 60.5 89.3 36.1 6.6% Multi-Family: 78.3 64.1 29.7 14.9% 2 to 4 units 94.3 85.0 35.2 6.3% 5 or more units 69.8 54.4 26.7 8.6% Mobile Homes 74.6 70.4 28.5 4.6% All Housing Types 58.7 95.0 37.0 100% Note(s): Source(s): 1) Energy consumption per square foot was calculated using estimates of average heated floor space per household. According to the 2005 Residential Energy Consumption Survey (RECS), the average heated floor space per household in the U.S. was 1,618 square feet. Average total floor space, which includes garages, attics and unfinished basements, equaled 2,309 square feet. EIA, 2005 Residential Energy Consumption Survey, Oct. 2008. 2005 Residential Delivered Energy Consumption Intensities, by Housing Type

172

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book (EERE)

2 2 Year Built (1) Prior to 1950 74.5 114.9 46.8 24% 1950 to 1969 66.0 96.6 38.1 23% 1970 to 1979 59.4 83.4 33.5 15% 1980 to 1989 51.9 81.4 32.3 14% 1990 to 1999 48.2 94.4 33.7 16% 2000 to 2005 44.7 94.7 34.3 8% Average 58.7 95.0 40.0 Note(s): Source(s): 1) Energy consumption per square foot was calculated using estimates of average heated floor space per household. According to the 2005 Residential Energy Consumption Survey (RECS), the average heated floor space per household in the U.S. was 1,618 square feet. Average total floor space, which includes garages, attics and unfinished basements, equaled 2,309 square feet. EIA, 2005 Residential Energy Consumption Survey, Oct. 2008. 2005 Residential Delivered Energy Consumption Intensities, by Vintage Per Square Per Household Per Household

173

Assessing and Improving the Accuracy of Energy Analysis for Residential Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Assessing and Improving the Assessing and Improving the Accuracy of Energy Analysis for Residential Buildings B. Polly, N. Kruis, and D. Roberts July 2011 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation,

174

Better Buildings Residential Program Solution Center Demonstration  

NLE Websites -- All DOE Office Websites (Extended Search)

Danielle Sass Byrnett Better Buildings Residential Building Technologies Office Program Solution Center Demonstration Outline * Goals, History, Content Sources * Tour: Organization - Program Components - Handbooks * Tour: Navigation Options * Tour: Examples * Next Steps * Questions & Feedback 2 eere.energy.gov Overview 3 eere.energy.gov Purpose: Support Residential Energy Efficiency Upgrade Programs & Partners * Provide an easily accessed repository for key lessons, resources, and knowledge collected from the experience of past programs. * Help programs and their partners plan, implement, manage, and evaluate better * Help stakeholders leapfrog past missteps en route to a larger and more successful industry. 4 eere.energy.gov Intended Audiences

175

Performance Criteria for Residential Zero Energy Windows  

E-Print Network (OSTI)

LaFrance. 2006. “Zero Energy Windows. ” Proceedings of the2003. “Future Advanced Windows for Zero-Energy Homes. ”and cooling energy use of windows in residential buildings

Arasteh, Dariush; Goudey, Howdy; Huang, Joe; Kohler, Christian; Mitchell, Robin

2006-01-01T23:59:59.000Z

176

Draft Environmental Assessment for Direct Final Rule, 10 CFR 434, "Energy Standards for New Federal Commercial and High-Rise High-Rise Multi-FamilyResidential Buildings" and 10 CFR 435, "Energy Efficiency Standards for New Federal Residential Low-Rise Re  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

"Energy "Energy Efficiency Standards for New Federal Commercial and High-Rise Multi-Family Residential Buildings" and 10 CFR 435, "Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings" Baseline Standards Update (DOE/EA-1871) March 16, 2011 2 Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and High-Rise Multi-Family Residential Buildings" and 10 CFR 435, "Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings" Baseline Standards Update

177

Energy Market Profiles: Volume 2: 1995 Residential Buildings, Appliances, and Energy Use  

Science Conference Proceedings (OSTI)

Energy use and equipment profiles at the region, segment, and end-use levels provide key information required to lay the groundwork for major marketing decisions. These decisions include how desirable a market is for utility entry, how quickly to enter a market, and how to best narrow a research focus. This study provides utility managers and decision makers with residential market profiles for 10 regions in the United States. This report is available only to funders of Program 101A or 101.001. Funders m...

1999-01-05T23:59:59.000Z

178

Energy Market Profiles: Volume 2: 1998 Residential Buildings, Appliances, and Energy Use  

Science Conference Proceedings (OSTI)

Energy use and equipment profiles at the regional, segment, and end-use levels provide key information required to lay the groundwork for major marketing decisions. These decisions include how desirable a market is for utility entry, how quickly to enter a market, and how to best narrow a research focus. This study provides utility managers and decision makers with residential market profiles for ten regions of the United States. This report is available only to funders of Program 101A or 101.001. Funder...

1999-12-02T23:59:59.000Z

179

Dynamic Simulation and Analysis of Factors Impacting the Energy Consumption of Residential Buildings  

E-Print Network (OSTI)

Buildings have a close relationship with climate. There are a lot of important factors that influence building energy consumption such as building shape coefficient, insulation work of building envelope, covered area, and the area ratio of window to wall. The integrated influence result will be different when the building is in different climate zone. This paper studies the variation rule of some aggregative indicators and building energy efficiency rates by simulation and analysis of the same building in different climate zones by eQuest, in order to determine how building energy efficiency works in different climate zones.

Lian, Y.; Hao, Y.

2006-01-01T23:59:59.000Z

180

Evaluation on Cooling Energy Load with Varied Envelope Design for High-Rise Residential Buildings in Malaysia  

E-Print Network (OSTI)

With the development of the economy in the recent years, Malaysia is maintaining a high economic growth and therefore, its energy consumption increases dramatically. Residential buildings are characterized by being envelope-load dominated buildings, hence are greatly influenced by the outside climatic conditions. Due to the hot humid climate of Malaysia, air conditioning system accounts for more than 45% of the total electricity used in the residential sector which is required to remove substantial amount of gained heat due to poor thermal envelope performance. This paper uses Ecotect software to analyze the impact of building envelope design on energy cooling load for residential building in Penang, Malaysia, which include area ratio of window to floor, exterior wall thermal insulation, and several kinds of shading system. This paper describes an integrated passive design approach to reduce the cooling requirement for high-rise apartments through an improved building envelope design. Comparing with the other passive strategies investigated in this paper, the results indicated that exterior wall thermal insulation is the best strategy to decrease both annual cooling energy load and peak cooling load which achieved a reduction of 10.2% and 26.3% respectively. However, the other passive strategies applied also have some marginal effect on decreasing the cooling load.

Al-Tamimi, N.; Fadzil, S.

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

U.S. Residential Housing Weather Adjusted Site Energy Consumption ...  

U.S. Energy Information Administration (EIA)

Home > Households, Buildings & Industry > Energy Efficiency > Residential Housing Energy Intensities > Table 1b Glossary U.S. Residential Housing Weather Adjusted ...

182

Operation of Energy Efficient Residential Buildings Under Indoor Environmental Quality Requirements  

E-Print Network (OSTI)

This paper is devoted to the influence of Indoor Environmental Quality, [IEQ] requirements associated with occupation regimes on the criterion of energy demand s for HVAC (Heating, Ventilating and Air-Conditioning) central systems that were constructed for student hostels as a residential building in Cairo, Egypt. The paper focuses on the effects of occupation rate profiles with IEQ thermal parameters; (those are air dry-bulb temperatures, relative humidity, fresh air requirements, and local air velocities), on yearly energy demands. It is applied on, in-service, real project as a case study "10-Stories Hostel of 6000 m2 built-up area" that is utilized by Non-Local students as a transferred Egyptian citizens [ EC ] from different governorates. It was concluded that. during energy simulation, occupation rate schedules and operation profiles for each source of heat inside space shall simulate the reality. These profiles and schedules should be added to the local energy code as a guideline for designers. Although in this case study results from simulation task reach the real bills, but sometimes, with multi-use apartments there is another required schedule for the Pre-Action days. Those days before holidays and feasts on which the air conditioning system shall operate in a certain procedure for cleaning or scavenging. Another important issue is the effect of Effective Temperatures [ET] (Temperature for constant thermal sensations) that could implement to reduce the cooling capacity by increasing the room temperature against indoor relative humidity for the same comfort sensation. These two concepts will save 17% to 22% of the project total energy demand, In addition to introducing new design criteria for acceptable indoor conditions in the new rural developed zones in Egypt and similar regions.

Medhat, A. A.; Khalil, E. E.

2010-01-01T23:59:59.000Z

183

AB 758 MANDATED COMPREHENSIVE ENERGY EFFICIENCY PROGRAM FOR EXISTING RESIDENTIAL AND NONRESIDENTIAL BUILDINGS  

E-Print Network (OSTI)

AND NONRESIDENTIAL BUILDINGS A. Legislative Requirements AB 758 requires the Energy Commission to develop and nonresidential building stock. The program will be established through regulations; the Energy Commission by the current California Building Energy Efficiency Standards (Title 24, Part 6). The Legislature recognizes

184

Evaluation of Automated Model Calibration Techniques for Residential Building Energy Simulation  

SciTech Connect

This simulation study adapts and applies the general framework described in BESTEST-EX (Judkoff et al 2010) for self-testing residential building energy model calibration methods. BEopt/DOE-2.2 is used to evaluate four mathematical calibration methods in the context of monthly, daily, and hourly synthetic utility data for a 1960's-era existing home in a cooling-dominated climate. The home's model inputs are assigned probability distributions representing uncertainty ranges, random selections are made from the uncertainty ranges to define 'explicit' input values, and synthetic utility billing data are generated using the explicit input values. The four calibration methods evaluated in this study are: an ASHRAE 1051-RP-based approach (Reddy and Maor 2006), a simplified simulated annealing optimization approach, a regression metamodeling optimization approach, and a simple output ratio calibration approach. The calibration methods are evaluated for monthly, daily, and hourly cases; various retrofit measures are applied to the calibrated models and the methods are evaluated based on the accuracy of predicted savings, computational cost, repeatability, automation, and ease of implementation.

Robertson, J.; Polly, B.; Collis, J.

2013-09-01T23:59:59.000Z

185

Window-Related Energy Consumption in the US Residential and Commercial Building Stock  

E-Print Network (OSTI)

solar gains with highly insulating windows, which leads to windows with positive heating energy flows offsetting buildingBuilding Heating Loads (Trillion BTU/yr) Year Made Number of Buildings (Thousands, 1993) U Factor SHGC Window Window SolarSolar Window Cond Window Infiltration Non-Window Infiltration Other Loads Total Loads Total Loads Window Properties Total Building Heating

Apte, Joshua; Arasteh, Dariush

2008-01-01T23:59:59.000Z

186

Recommendations for energy conservation standards for new residential buildings - volume 3: Introduction and Background to the Standard Development Effort  

SciTech Connect

The Energy Conservation for New Buildings Act of 1976, as amended, 42 U.S.C Section 6831 et. seq. requires the US Department of Energy to issue energy conservation standards for the design of new residential and commercial buildings. The standards will be mandatory only for the design of new federal buildings, and will serve as voluntary guidelines for the design of new non-federal buildings. This report documents the development and testing of a set of recommendations, from the American Society of Heating, Refrigeration and Air Conditioning Engineers, Inc. (ASHRAE) Special Projects Committee No. 53, designed to provide the technical foundation for the Congressionally-mandated energy standard for new residential buildings. The recommendations have been developed over the past 25 months by a multidisciplinary project team, under the management of the US Department of Energy and its prime contractor, Pacific Northwest Laboratory. Volume III -- Introduction and Background to the Standard Development Effort is a description of the Standard development process and contains the rationale for the general approach and specific criteria contained within the recommendations.

Not Available

1989-05-01T23:59:59.000Z

187

Better Buildings Partners: Better Buildings Residential Network...  

NLE Websites -- All DOE Office Websites (Extended Search)

work they are doing to advance energy efficiency. AFC First Alabama Energy Doctors Austin Energy BC Hydro Boulder County, Colorado Building Sustainable Solutions, LLC California...

188

Residential Buildings Historical Publications reports, data and...  

Gasoline and Diesel Fuel Update (EIA)

3 Average LPG Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households...

189

Residential Buildings Historical Publications reports, data and...  

Gasoline and Diesel Fuel Update (EIA)

0 Average Electricity Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household...

190

Residential Buildings Historical Publications reports, data and...  

Gasoline and Diesel Fuel Update (EIA)

1 Average Fuel OilKerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per...

191

Residential Buildings Historical Publications reports, data and...  

Annual Energy Outlook 2012 (EIA)

3 Average Fuel OilKerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per...

192

Residential Buildings Historical Publications reports, data and...  

Annual Energy Outlook 2012 (EIA)

90 Average Fuel OilKerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per...

193

Residential Buildings Historical Publications reports, data and...  

Gasoline and Diesel Fuel Update (EIA)

1 Average Natural Gas Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household...

194

Residential Buildings Historical Publications reports, data and...  

Gasoline and Diesel Fuel Update (EIA)

2 Average Electricity Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household...

195

Residential Buildings Historical Publications reports, data and...  

Annual Energy Outlook 2012 (EIA)

7 Average LPG Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households...

196

Residential Buildings Historical Publications reports, data and...  

Gasoline and Diesel Fuel Update (EIA)

4 Average Electricity Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household...

197

Residential Buildings Historical Publications reports, data and...  

Annual Energy Outlook 2012 (EIA)

1 Average Electricity Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household...

198

Residential Buildings Historical Publications reports, data and...  

Annual Energy Outlook 2012 (EIA)

0 Average LPG Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households...

199

Residential Buildings Historical Publications reports, data and...  

Annual Energy Outlook 2012 (EIA)

3 Average Electricity Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household...

200

Residential Buildings Historical Publications reports, data and...  

Annual Energy Outlook 2012 (EIA)

7 Average Fuel OilKerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per...

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Residential Buildings Historical Publications reports, data and...  

Gasoline and Diesel Fuel Update (EIA)

4 Average Fuel OilKerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per...

202

Residential Buildings Historical Publications reports, data and...  

Gasoline and Diesel Fuel Update (EIA)

7 Average Electricity Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household...

203

Residential Buildings Historical Publications reports, data and...  

Gasoline and Diesel Fuel Update (EIA)

2 Average LPG Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per Household Households...

204

Residential Buildings Historical Publications reports, data and...  

Annual Energy Outlook 2012 (EIA)

0 Average Fuel OilKerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per...

205

Residential Buildings Historical Publications reports, data and...  

Annual Energy Outlook 2012 (EIA)

2 Average Fuel OilKerosene Residential Buildings Consumption Expenditures per Total per Square per per per Total Total Floorspace Building Foot per Household per Square per...

206

Building Technologies Office: Residential Dishwashers, Dehumidifiers, and  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential Residential Dishwashers, Dehumidifiers, and Cooking Products, and Commercial Clothes Washers ANOPR Public Meeting to someone by E-mail Share Building Technologies Office: Residential Dishwashers, Dehumidifiers, and Cooking Products, and Commercial Clothes Washers ANOPR Public Meeting on Facebook Tweet about Building Technologies Office: Residential Dishwashers, Dehumidifiers, and Cooking Products, and Commercial Clothes Washers ANOPR Public Meeting on Twitter Bookmark Building Technologies Office: Residential Dishwashers, Dehumidifiers, and Cooking Products, and Commercial Clothes Washers ANOPR Public Meeting on Google Bookmark Building Technologies Office: Residential Dishwashers, Dehumidifiers, and Cooking Products, and Commercial Clothes Washers ANOPR

207

Cooling energy savings potential of light-colored roofs for residential and commercial buildings in 11 US metropolitan areas  

SciTech Connect

The U.S. Environmental Protection Agency (EPA) sponsored this project to estimate potential energy and monetary savings resulting from the implementation of light-colored roofs on residential and commercial buildings in major U.S. metropolitan areas. Light-colored roofs reflect more sunlight than dark roofs, so they keep buildings cooler and reduce air-conditioning demand. Typically, rooftops in the United States are dark, and thus there is a potential for saving energy and money by changing to reflective roofs. Naturally, the expected savings are higher in southern, sunny, and cloudless climates. In this study, we make quantitative estimates of reduction in peak power demand and annual cooling electricity use that would result from increasing the reflectivity of the roofs. Since light-colored roofs also reflect heat in the winter, the estimates of annual electricity savings are a net value corrected for the increased wintertime energy use. Savings estimates only include direct reduction in building energy use and do not account for the indirect benefit that would also occur from the reduction in ambient temperature, i.e. a reduction in the heat island effect. This analysis is based on simulations of building energy use, using the DOE-2 building energy simulation program. Our methodology starts with specifying 11 prototypical buildings: single-family residential (old and new), office (old and new), retail store (old and new), school (primary and secondary), health (hospital and nursing home), and grocery store. Most prototypes are simulated with two heating systems: gas furnace and heat pumps. We then perform DOE-2 simulations of the prototypical buildings, with light and dark roofs, in a variety of climates and obtain estimates of the energy use for air conditioning and heating.

Konopacki, S.; Akbari, H.; Gartland, L. [and others

1997-05-01T23:59:59.000Z

208

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book (EERE)

0 0 Region (1) Northeast 73.5 122.2 47.7 24% New England 77.0 129.4 55.3 7% Middle Atlantic 72.2 119.7 45.3 17% Midwest 58.9 113.5 46.0 28% East North Central 61.1 117.7 47.3 20% West North Central 54.0 104.1 42.9 8% South 51.5 79.8 31.6 31% South Atlantic 47.4 76.1 30.4 16% East South Central 56.6 87.3 36.1 6% West South Central 56.6 82.4 31.4 9% West 56.6 77.4 28.1 18% Mountain 54.4 89.8 33.7 6% Pacific 58.0 71.8 25.7 11% U.S. Average 58.7 94.9 37.0 100% Note(s): Source(s): 1) Energy consumption per square foot was calculated using estimates of average heated floor space per household. According to the 2005 Residential Energy Consumption Survey (RECS), the average heated floor space per household in the U.S. was 1,618 square feet. Average total floor space, which includes garages, attics and unfinished basements, equaled 2,309 square feet.

209

Commercial Codes and Standards | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

(or non-residential) buildings, in the context of building energy codes and standards, are all buildings other than low-rise residential buildings, including multi-family...

210

U.S. Residential Housing Primary Energy Consumption  

U.S. Energy Information Administration (EIA)

Home > Households, Buildings & Industry > Energy Efficiency > Residential Housing Energy Intensities > Table 1c Glossary U.S. Resident ...

211

Economic analysis in support of proposed interim energy conservation voluntary performance standards for new non-federal residential buildings: Volume 6  

Science Conference Proceedings (OSTI)

The objective of this document is to present an analysis of the impacts of the proposed voluntary energy conservation standard fr the construction of new residential buildings. This analysis examines the impacts of having the proposed residential standard apply immediately and, alternatively, having the proposed standard phased in over a five-year period.

NONE

1989-09-01T23:59:59.000Z

212

Program on Technology Innovation: Advanced Technologies for Energy Efficiency in Residential and Commercial Buildings  

Science Conference Proceedings (OSTI)

This report presents the ideas and opinions expressed by a variety of experts related to the basic science research needs for improving the energy efficiency of end-use technologies for the residential and commercial sectors. The experts participating in this project come from a wide range of institutions, including government research laboratories, universities, state and federal energy agencies, private research laboratories, industry consultants, Electric Power Research Institute (EPRI) member electri...

2008-05-30T23:59:59.000Z

213

Guam - Solar-Ready Residential Building Requirement | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solar-Ready Residential Building Requirement Guam - Solar-Ready Residential Building Requirement < Back Eligibility Construction Residential Savings Category Heating & Cooling...

214

Baltimore Gas & Electric Company (Electric) - Residential Energy...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

freezers, CFLs, HVAC systems, and Building Insulation. The Home Performance with Energy Star Incentive Program also provides residential incentives including envelope and...

215

Energy efficiency standards for residential and commercial equipment: Additional opportunities  

E-Print Network (OSTI)

buildings/appliance_standards/residential/ac_central.html>LBNL-56207 Energy Efficiency Standards for Residential andLevels for Upgraded Standards..………………..8 6. Estimation of

Rosenquist, Greg; McNeil, Michael; Iyer, Maithili; Meyers, Steve; McMahon, Jim

2004-01-01T23:59:59.000Z

216

1997 Residential Energy Consumption and Expenditures per Household ...  

U.S. Energy Information Administration (EIA)

Return to: Residential Home Page . Changes in the 1997 RECS: Housing Unit Type Per Household Member Per Building Increase. Residential Energy Consumption ...

217

City of Austin - Commercial and Residential Green Building Requirements |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here You are here Home » City of Austin - Commercial and Residential Green Building Requirements City of Austin - Commercial and Residential Green Building Requirements < Back Eligibility Commercial Multi-Family Residential Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Bioenergy Solar Lighting Windows, Doors, & Skylights Buying & Making Electricity Water Heating Water Heating Wind Program Info State Texas Program Type Building Energy Code Provider Austin Energy '''''Note: The requirements listed below are current only up to the date of last review (see the top of this page). The City of Austin may also make additional requirements depending on the circumstances of a given project.

218

Energy and air quality implications of passive stack ventilation in residential buildings  

E-Print Network (OSTI)

Sherman, M.H. (2008). “Energy Implications of Meeting ASHRAE62.2”, ASHRAE Transactions, June 2008, Vol. 114, Pt. 2, pp.and Sustainable Buildings, ASHRAE. Orme, M. 1998. "Energy

Mortensen, Dorthe Kragsig

2011-01-01T23:59:59.000Z

219

Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Marine Climates; January 2006 - December 2006  

SciTech Connect

The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Marine Climate Region on a cost neutral basis.

Building America Industrialized Housing Partnership (BAIHP); Building Industry Research Alliance (BIRA); Building Science Consortium (BSC); Consortium for Advanced Residential Buildings (CARB); Davis Energy Group (DEG); IBACOS; National Association of Home Builders Research Center (NAHBRC); National Renewable Energy Laboratory (NREL)

2006-12-01T23:59:59.000Z

220

Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Marine Climates; January 2006 - December 2006  

SciTech Connect

The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Marine Climate Region on a cost neutral basis.

Building America Industrialized Housing Partnership (BAIHP); Building Industry Research Alliance (BIRA); Building Science Consortium (BSC); Consortium for Advanced Residential Buildings (CARB); Davis Energy Group (DEG); IBACOS; National Association of Home Builders Research Center (NAHBRC); National Renewable Energy Laboratory (NREL)

2006-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

City of Frisco - Residential and Commercial Green Building Codes |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

City of Frisco - Residential and Commercial Green Building Codes City of Frisco - Residential and Commercial Green Building Codes City of Frisco - Residential and Commercial Green Building Codes < Back Eligibility Commercial Multi-Family Residential Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Sealing Your Home Ventilation Insulation Program Info State Texas Program Type Building Energy Code Provider Frisco Department of Planning and Development '''''Note: In the spring on 2012, the city of Frisco was working to update the residential requirements. No official city council action had been taken at the time this summary was updated. Check program web site for current status of updates.''''' The city of Frisco administers a green building program with separate rules

222

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

DOE Green Energy (OSTI)

An increasing number of energy efficient appliances operate on direct current (DC) internally, offering the potential to use DC from renewable energy systems directly and avoiding the losses inherent in converting power to alternating current (AC) and back. This paper investigates that potential for net-metered residences with on-site photovoltaics (PV) by modeling the net power draw of the ‘direct-DC house’ with respect to today’s typical configuration, assuming identical DC-internal loads. Power draws were modeled for houses in 14 U.S. cities, using hourly, simulated PV-system output and residential loads. The latter were adjusted to reflect a 33% load reduction, representative of the most efficient DC-internal technology, based on an analysis of 32 electricity end-uses. The model tested the effect of climate, electric vehicle (EV) loads, electricity storage, and load shifting on electricity savings; a sensitivity analysis was conducted to determine how future changes in the efficiencies of power system components might affect savings potential. Based on this work, we estimate that net-metered PV residences could save 5% of their total electricity load for houses without storage and 14% for houses with storage. Based on residential PV penetration projections for year 2035 obtained from the National Energy Modeling System (2.7% for the reference case and 11.2% for the extended policy case), direct-DC could save the nation 10 trillion Btu (without storage) or 40 trillion Btu (with storage). Shifting the cooling load by two hours earlier in the day (pre-cooling) has negligible benefits for energy savings. Direct-DC provides no energy savings benefits for EV charging, to the extent that charging occurs at night. However, if charging occurred during the day, for example with employees charging while at work, the benefits would be large. Direct-DC energy savings are sensitive to power system and appliance conversion efficiencies but are not significantly influenced by climate. While direct-DC for residential applications will most likely arise as a spin-off of developments in the commercial sector—because of lower barriers to market entry and larger energy benefits resulting from the higher coincidence between load and insolation—this paper demonstrates that there are substantial benefits in the residential sector as well. Among residential applications, space cooling derives the largest energy savings from being delivered by a direct-DC system. It is the largest load for the average residence on a national basis and is particularly so in high-load regions. It is also the load with highest solar coincidence.

Garbesi, Karina; Vossos, Vagelis; Sanstad, Alan; Burch, Gabriel

2011-10-13T23:59:59.000Z

223

A Comparison of the 2003 and 2006 International Energy Conservation Codes to Determine the Potential Impact on Residential Building Energy Efficiency  

SciTech Connect

The IECC was updated in 2006. As required in the Energy Conservation and Production Act of 1992, Title 3, DOE has a legislative requirement to "determine whether such revision would improve energy efficiency in residential buildings" within 12 months of the latest revision. This requirement is part of a three-year cycle of regular code updates. To meet this requirement, an independent review was completed using personnel experienced in building science but not involved in the code development process.

Stovall, Therese K [ORNL; Baxter, Van D [ORNL

2008-03-01T23:59:59.000Z

224

Mitigating the Impacts of Uncontrolled Air Flow on Indoor Environmental Quality and Energy Demand in Non-Residential Buildings  

SciTech Connect

This multi-faceted study evaluated several aspects of uncontrolled air flows in commercial buildings in both Northern and Southern climates. Field data were collected from 25 small commercial buildings in New York State to understand baseline conditions for Northern buildings. Laboratory wall assembly testing was completed at Syracuse University to understand the impact of typical air leakage pathways on heat and moisture transport within wall assemblies for both Northern and Southern building applications. The experimental data from the laboratory tests were used to verify detailed heat and moisture (HAM) simulation models that could be used to evaluate a wider array of building applications and situations. Whole building testing at FSEC's Building Science Laboratory (BSL) systematically evaluated the energy and IAQ impacts of duct leakage with various attic and ceiling configurations. This systematic test carefully controlled all aspects of building performance to quantify the impact of duct leakage and unbalanced flow. The newest features of the EnergyPlus building simulation tool were used to model the combined impacts of duct leakage, ceiling leakage, unbalanced flows, and air conditioner performance. The experimental data provided the basis to validate the simulation model so it could be used to study the impact of duct leakage over a wide range of climates and applications. The overall objective of this project was to transfer work and knowledge that has been done on uncontrolled air flow in non-residential buildings in Florida to a national basis. This objective was implemented by means of four tasks: (1) Field testing and monitoring of uncontrolled air flow in a sample of New York buildings; (2) Detailed wall assembly laboratory measurements and modeling; (3) Whole building experiments and simulation of uncontrolled air flows; and (4) Develop and implement training on uncontrolled air flows for Practitioners in New York State.

Hugh I. Henderson; Jensen Zhang; James B. Cummings; Terry Brennan

2006-07-31T23:59:59.000Z

225

Mitigating the Impacts of Uncontrolled Air Flow on Indoor Environmental Quality and Energy Demand in Non-Residential Buildings  

SciTech Connect

This multi-faceted study evaluated several aspects of uncontrolled air flows in commercial buildings in both Northern and Southern climates. Field data were collected from 25 small commercial buildings in New York State to understand baseline conditions for Northern buildings. Laboratory wall assembly testing was completed at Syracuse University to understand the impact of typical air leakage pathways on heat and moisture transport within wall assemblies for both Northern and Southern building applications. The experimental data from the laboratory tests were used to verify detailed heat and moisture (HAM) simulation models that could be used to evaluate a wider array of building applications and situations. Whole building testing at FSEC's Building Science Laboratory (BSL) systematically evaluated the energy and IAQ impacts of duct leakage with various attic and ceiling configurations. This systematic test carefully controlled all aspects of building performance to quantify the impact of duct leakage and unbalanced flow. The newest features of the EnergyPlus building simulation tool were used to model the combined impacts of duct leakage, ceiling leakage, unbalanced flows, and air conditioner performance. The experimental data provided the basis to validate the simulation model so it could be used to study the impact of duct leakage over a wide range of climates and applications. The overall objective of this project was to transfer work and knowledge that has been done on uncontrolled air flow in non-residential buildings in Florida to a national basis. This objective was implemented by means of four tasks: (1) Field testing and monitoring of uncontrolled air flow in a sample of New York buildings; (2) Detailed wall assembly laboratory measurements and modeling; (3) Whole building experiments and simulation of uncontrolled air flows; and (4) Develop and implement training on uncontrolled air flows for Practitioners in New York State.

Hugh I. Henderson; Jensen Zhang; James B. Cummings; Terry Brennan

2006-07-31T23:59:59.000Z

226

Vapnik's learning theory applied to energy consumption forecasts in residential buildings  

Science Conference Proceedings (OSTI)

For the purpose of energy conservation, we present in this paper an introduction to the use of support vector (SV) learning machines used as a data mining tool applied to buildings energy consumption data from a measurement campaign. Experiments using ... Keywords: data mining, energy conservation, energy efficiency, predictive modelling, statistical learning theory

Florence Lai; Frederic Magoules; Fred Lherminier

2008-10-01T23:59:59.000Z

227

Energy for 500 Million Homes: Drivers and Outlook for Residential Energy Consumption in China  

E-Print Network (OSTI)

of Commercial Building Energy Consumption in China, 2008,Residential Energy Consumption Survey, Human and Socialfor Residential Energy Consumption in China Nan Zhou,

Zhou, Nan

2010-01-01T23:59:59.000Z

228

Energy for 500 Million Homes: Drivers and Outlook for Residential Energy Consumption in China  

E-Print Network (OSTI)

of Commercial Building Energy Consumption in China, 2008,The China Residential Energy Consumption Survey, Human andfor Residential Energy Consumption in China Nan Zhou,

Zhou, Nan

2010-01-01T23:59:59.000Z

229

Residential Energy Efficiency Stakeholder Meeting - Spring 2012 |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Energy Efficiency Stakeholder Meeting - Spring 2012 Residential Energy Efficiency Stakeholder Meeting - Spring 2012 Residential Energy Efficiency Stakeholder Meeting - Spring 2012 The U.S. Department of Energy (DOE) Building America program held the second annual Residential Energy Efficiency Stakeholder Meeting on February 29-March 2, 2012, in Austin, Texas. At this meeting, hundreds of building industry professionals came together to share their perspective on the most current innovation projects in the residential buildings sector. This meeting provided an opportunity for researchers and industry stakeholders to showcase and discuss the latest in cutting-edge, energy-efficient residential building technologies and practices. The meeting also included working sessions from each Standing Technical Committee (STC), which outlined work that will best assist in overcoming

230

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book (EERE)

5 5 Natural Fuel Other Renw. Site Site Primary Gas Oil LPG Fuel(1) En.(2) Electric Total Percent Electric (3) Total Percent Space Heating (4) 3.50 0.53 0.30 0.04 0.43 0.44 5.23 44.7% | 1.35 6.15 27.8% Water Heating 1.29 0.10 0.07 0.01 0.45 1.92 16.4% | 1.38 2.86 12.9% Space Cooling 0.00 1.08 1.08 9.2% | 3.34 3.34 15.1% Lighting 0.69 0.69 5.9% | 2.13 2.13 9.7% Refrigeration (6) 0.45 0.45 3.9% | 1.41 1.41 6.4% Electronics (5) 0.54 0.54 4.7% | 1.68 1.68 7.6% Wet Cleaning (7) 0.06 0.33 0.38 3.3% | 1.01 1.06 4.8% Cooking 0.22 0.03 0.18 0.43 3.7% | 0.57 0.81 3.7% Computers 0.17 0.17 1.5% | 0.53 0.53 2.4% Other (8) 0.00 0.16 0.01 0.20 0.37 3.2% | 0.63 0.80 3.6% Adjust to SEDS (9) 0.42 0.42 3.6% | 1.29 1.29 5.8% Total 5.06 0.63 0.56 0.04 0.45 4.95 11.69 100% | 15.34 22.07 100% Note(s): Source(s): 2010 Residential Energy End-Use Splits, by Fuel Type (Quadrillion Btu) Primary 1) Kerosene and coal are assumed attributable to space heating. 2) Comprised of wood space heating (0.42 quad), solar water heating (0.01

231

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book (EERE)

8 8 Natural Fuel Other Renw. Site Site Primary Gas Oil LPG Fuel(1) En.(2) Electric Total Percent Electric (3) Total Percent Space Heating (4) 3.20 0.31 0.22 0.03 0.46 0.49 4.72 38.9% | 1.45 5.67 23.9% Water Heating 1.27 0.04 0.03 0.02 0.54 1.90 15.6% | 1.60 2.96 12.5% Space Cooling 0.00 1.25 1.25 10.3% | 3.68 3.68 15.5% Lighting 0.48 0.48 3.9% | 1.41 1.41 5.9% Refrigeration (5) 0.52 0.52 4.3% | 1.54 1.54 6.5% Electronics (6) 0.44 0.44 3.6% | 1.29 1.29 5.4% Wet Cleaning (7) 0.07 0.32 0.39 3.2% | 0.95 1.01 4.3% Cooking 0.23 0.02 0.15 0.40 3.3% | 0.44 0.69 2.9% Computers 0.27 0.27 2.2% | 0.79 0.79 3.3% Other (8) 0.00 0.22 0.07 1.48 1.77 14.6% | 4.35 4.64 19.6% Total 4.76 0.35 0.51 0.03 0.55 5.94 12.14 100% | 17.50 23.69 100% Note(s): Source(s): 2035 Residential Energy End-Use Splits, by Fuel Type (Quadrillion Btu) Primary 1) Kerosene and coal are assumed attributable to space heating. 2) Comprised of wood space heating (0.44 quad), solar water heating (0.02

232

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book (EERE)

7 7 Natural Fuel Other Renw. Site Site Primary Gas Oil LPG Fuel(1) En.(2) Electric Total Percent Electric (3) Total Percent Space Heating (4) 3.28 0.38 0.24 0.03 0.46 0.46 4.85 41.5% | 1.40 5.78 25.8% Water Heating 1.32 0.05 0.04 0.02 0.53 1.96 16.8% | 1.60 3.03 13.5% Space Cooling 0.00 1.12 1.12 9.6% | 3.38 3.38 15.1% Lighting 0.47 0.47 4.0% | 1.42 1.42 6.3% Refrigeration (5) 0.48 0.48 4.1% | 1.45 1.45 6.5% Electronics (6) 0.37 0.37 3.2% | 1.12 1.12 5.0% Wet Cleaning (7) 0.06 0.30 0.37 3.1% | 0.91 0.98 4.4% Cooking 0.22 0.03 0.13 0.38 3.2% | 0.40 0.64 2.9% Computers 0.24 0.24 2.0% | 0.72 0.72 3.2% Other (8) 0.00 0.20 0.07 1.20 1.46 12.5% | 3.61 3.87 17.3% Total 4.88 0.43 0.50 0.03 1.00 5.30 11.69 100% | 16.00 22.39 100% Note(s): Source(s): 2025 Residential Energy End-Use Splits, by Fuel Type (Quadrillion Btu) Primary 1) Kerosene and coal are assumed attributable to space heating. 2) Comprised of wood space heating (0.43 quad), solar water heating (0.02

233

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book (EERE)

6 6 Natural Fuel Other Renw. Site Site Primary Gas Oil LPG Fuel(1) En.(2) Electric Total Percent Electric (3) Total Percent Space Heating (4) 3.40 0.48 0.26 0.03 0.44 0.42 5.03 44.2% | 1.27 5.88 27.9% Water Heating 1.31 0.07 0.05 0.02 0.48 1.92 16.9% | 1.44 2.88 13.7% Space Cooling 0.00 1.02 1.02 8.9% | 3.07 3.07 14.6% Lighting 0.53 0.53 4.6% | 1.60 1.60 7.6% Refrigeration (5) 0.45 0.45 4.0% | 1.37 1.37 6.5% Electronics (6) 0.33 0.33 2.9% | 0.99 0.99 4.7% Wet Cleaning (7) 0.06 0.33 0.39 3.4% | 0.98 1.04 5.0% Cooking 0.22 0.03 0.11 0.36 3.1% | 0.34 0.59 2.8% Computers 0.19 0.19 1.7% | 0.57 0.57 2.7% Other (8) 0.00 0.17 0.05 0.94 1.17 10.2% | 2.85 3.07 14.6% Total 4.99 0.55 0.51 0.03 0.51 4.79 11.38 100% | 14.47 21.06 100% Note(s): Source(s): 2015 Residential Energy End-Use Splits, by Fuel Type (Quadrillion Btu) Primary 1) Kerosene and coal are assumed attributable to space heating. 2) Comprised of wood space heating (0.43 quad), solar water heating (0.02

234

Building Energy Code | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Code Building Energy Code Eligibility Commercial Residential Savings For Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling...

235

Connecticut State Certification of Commercial and Residential Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Connecticut State Certification of Commercial and Residential Building Connecticut State Certification of Commercial and Residential Building Energy Codes The purpose of this letter is to document that the State of Connecticut has met its stautory requirement with regard to adoption of energy codes that meet or exceed the 2009 International Energy Conservation Code for residential buildings and ASHRAE Standard 90.1-2007 for commercial buildings. Publication Date: Tuesday, July 16, 2013 CT Certification of Building Energy Codes.pdf Document Details Last Name: Cassidy Initials: JV Affiliation: Connecticut Department of Administrative Services, Division of Construction Services Prepared by: prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program Focus: Adoption Building Type:

236

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

E-Print Network (OSTI)

residential electricity consumption, a simplified approach was used to determine plausible future penetration rates

Garbesi, Karina

2012-01-01T23:59:59.000Z

237

Energy Smart - Residential Energy Efficiency Rebate Program ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Smart - Residential Energy Efficiency Rebate Program (20 Municipalities) Energy Smart - Residential Energy Efficiency Rebate Program (20 Municipalities) < Back Eligibility...

238

Retrofit of Existing Residential Building: a Case Study  

E-Print Network (OSTI)

There are about 42 billion square meters of existing buildings in China. The energy efficiency of existing buildings directly relates to the energy consumption of the building sector. The retrofit of existing residential building began in the 1990s in Heilongjiang. The Sino-Canada demonstration project and Sino-France demonstration project of retrofitting existing residential buildings were carried out in 1997 and 2004, respectively. The retrofit method and energy conservation potential of the envelope and heating system of northern existing buildings are analyzed in this paper, combining the experiences of retrofitting existing residential buildings in Heilongjiang. The software was compiled to aid the design of the envelope retrofit in Heilongjiang and to analyze the working situation in existing residential building heating systems. The imbalance of the indoor temperature and the quantity of heating loss from opening the window in different retrofit projects are presented. The emphasis on energy efficiency retrofit of the envelope of existing residential buildings should be placed on the wall in northern region. It is possible to reduce about 50 percent of energy consumption of buildings by insulating the wall. The external insulation is suitable for retrofitting existing buildings, and the moisture transfer should be considered at the same time. To insure actual reduction in energy consumption, the heating system should be retrofitted when the envelope is insulated.

Zhao, L.; Xu, W.; Li, L.; Gao, G.

2006-01-01T23:59:59.000Z

239

Impacts of the 2009 IECC for Residential Buildings at State Level - Minnesota  

NLE Websites -- All DOE Office Websites (Extended Search)

Minnesota Minnesota September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN MINNESOTA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN MINNESOTA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Minnesota Summary The energy efficiency requirements in the Minnesota building code are based on the 2006 International Residential Code (IRC) with relatively extensive modifications. The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the 2006 IRC. The most notable

240

Building America Puts Residential Research Results to Work  

DOE Green Energy (OSTI)

Residential buildings use more than 20% of the energy consumed annually in the United States. To help reduce that energy use, the Department of Energy (DOE) and its Building America partners conduct research to develop advanced building energy systems that make homes and communities much more energy-efficient. DOE and its partners design, build, and evaluate attractive, comfortable homes that increase performance with little or no increase in construction costs.

Not Available

2004-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Energy Savings Gap in Spain. A case study: Policy assessment for energy efficiency in residential buildings.  

E-Print Network (OSTI)

??Energy efficiency is one of the most cost effective ways to enhance security of energy supply and reduce greenhouse gas emissions. According to Europe’s Energy… (more)

Yearwood Travezan, J.

2012-01-01T23:59:59.000Z

242

Analysis of Energy Consumption and Research on Energy-Saving Technology of Rural Residential Buildings in Southern Shaanxi  

Science Conference Proceedings (OSTI)

The article was to grasp trends of energy consumption of village in southern Shaanxi province. Selecting Huangjiagou village of Mian county in Hanzhong city as the investigation base ˇŁRespectively, in January 2009 and July2010, investigation was conducted ... Keywords: rural region, investigation, residential dwellings, energy consumption, energy conservation

Yang Liu; Xia Fang; Meng Dan; An Yungang

2011-02-01T23:59:59.000Z

243

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book (EERE)

20 20 Site Consumption Primary Consumption Total Residential Industry Electric Gen. Transportation Residential Industry Transportation (quads) 1980 5% 28% 8% 56% | 8% 31% 56% 34.2 1981 5% 26% 7% 59% | 7% 29% 59% 31.9 1982 5% 26% 5% 61% | 6% 28% 61% 30.2 1983 4% 25% 5% 62% | 6% 27% 62% 30.1 1984 5% 26% 4% 61% | 6% 27% 61% 31.1 1985 5% 25% 4% 63% | 6% 26% 63% 30.9 1986 5% 24% 5% 63% | 6% 26% 63% 32.2 1987 5% 25% 4% 63% | 6% 26% 63% 32.9 1988 5% 24% 5% 63% | 6% 26% 63% 34.2 1989 5% 24% 5% 63% | 7% 25% 63% 34.2 1990 4% 25% 4% 64% | 5% 26% 64% 33.6 1991 4% 24% 4% 65% | 5% 26% 65% 32.8 1992 4% 26% 3% 65% | 5% 27% 65% 33.5 1993 4% 25% 3% 65% | 5% 26% 65% 33.8 1994 4% 25% 3% 65% | 5% 26% 65% 34.7 1995 4% 25% 2% 67% | 5% 26% 67% 34.6 1996 4% 25% 2% 66% | 5% 26% 66% 35.8 1997 4% 26% 3% 66% | 5% 26% 66% 36.3 1998 3% 25% 4% 66% | 5% 26% 66% 36.9 1999 4% 25% 3% 66% | 5% 26% 66% 38.0 2000 4% 24% 3% 67% | 5% 25% 67% 38.4 2001 4% 24% 3% 67% | 5% 25% 67% 38.3 2002 4% 24% 3% 68% | 5% 25% 68% 38.4 2003

244

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book (EERE)

9 9 Total Residential Industry Electric Gen. Transportation Residential Industry Transportation (quads) 1980 24% 41% 19% 3% | 30% 49% 3% 20.22 1981 23% 42% 19% 3% | 30% 49% 3% 19.74 1982 26% 39% 18% 3% | 32% 45% 3% 18.36 1983 26% 39% 17% 3% | 32% 46% 3% 17.20 1984 25% 40% 17% 3% | 31% 47% 3% 18.38 1985 25% 40% 18% 3% | 32% 46% 3% 17.70 1986 26% 40% 16% 3% | 32% 46% 3% 16.59 1987 25% 41% 17% 3% | 31% 47% 3% 17.63 1988 26% 42% 15% 3% | 31% 47% 3% 18.44 1989 25% 41% 16% 3% | 30% 47% 3% 19.56 1990 23% 43% 17% 3% | 29% 49% 4% 19.57 1991 23% 43% 17% 3% | 29% 49% 3% 20.03 1992 23% 43% 17% 3% | 29% 49% 3% 20.71 1993 24% 43% 17% 3% | 30% 48% 3% 21.24 1994 23% 42% 18% 3% | 29% 48% 3% 21.75 1995 22% 42% 19% 3% | 28% 49% 3% 22.71 1996 23% 43% 17% 3% | 29% 49% 3% 23.14 1997 22% 43% 18% 3% | 28% 49% 3% 23.34 1998 20% 43% 20% 3% | 27% 50% 3% 22.86 1999 21% 41% 21% 3% | 28% 48% 3% 22.88 2000 21% 40% 22% 3% | 29% 47% 3% 23.66 2001 21% 38% 24% 3% | 30% 45% 3% 22.69 2002 21% 38% 24% 3% | 30% 45%

245

Buildings Energy Data Book: 7.5 Efficiency Standards for Residential Appliances  

Buildings Energy Data Book (EERE)

2 2 Efficiency Standards for Residential Refrigerators and Freezers (1) 1) 2) 3) 4) 5) 6) Note(s): Source(s): Refrigerator-freezers, automatic defrost with side-mounted freezer with through-the-door ice service 10.10AV + 406.0 1) Effective for products manufactured on or after July 1, 2001. Standards do not apply to refrigerators and refrigerator-freezers with total refrigerated volume exceeding 39 cubic feet or freezers with total refrigerated volume exceeding 30 cubic feet. AV = total adjusted volume (ft^3). Title 10, Code of Federal Regulations, Part 430 - Energy Conservation Program for Consumer Products, Subpart C - Energy and Water Conservation Standards and Their Effective Dates. January 1, 2010. Refrigerator-freezers, automatic defrost with side-mounted freezer without through-the-

246

Florida Solar Energy Center (Building America Partnership for...  

Open Energy Info (EERE)

for Improved Residential Construction Jump to: navigation, search Name Florida Solar Energy Center (Building America Partnership for Improved Residential Construction...

247

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book (EERE)

Buildings, by Fuel and Region (Thousand BtuSF) Region Electricity Natural Gas Fuel Oil Total Northeast 27.7 45.9 39.9 71.5 Midwest 22.5 49.9 N.A. 70.3 South 53.5 27.9 N.A....

248

Draft Environmental Assessment for Direct Final Rule, 10 CFR 434, ÂŤEnergy Standards for New Federal Commercial and High-Rise High-Rise Multi-FamilyResidential BuildingsÂŽ and 10 CFR 435, ÂŤEnergy Efficiency Standards for New Federal Residential Low-Rise Re  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7 7 Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and High-Rise Multi-Family Residential Buildings" and 10 CFR 435, "Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings" (DOE/EA-1463) Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and High-Rise Multi-Family Residential Buildings" and 10 CFR 435, "Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings" (DOE/EA-1463) SUMMARY The U.S. Department of Energy (DOE) has prepared this Environmental Assessment (EA) for DOE's Final Rule, 10 CFR 433, "Energy Efficiency Standards for

249

Austin Energy - Residential Energy Efficiency Rebate Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rebate Program Austin Energy - Residential Energy Efficiency Rebate Program Eligibility Residential Savings For Home Weatherization Commercial Weatherization Heating & Cooling...

250

Impacts of the 2009 IECC for Residential Buildings at State Level...  

NLE Websites -- All DOE Office Websites (Extended Search)

BUILDING ENERGY CODES PROGRAM Impacts of the 2009 IECC for Residential Buildings at State Level September 2009 Prepared by Pacific Northwest National Laboratory for the U.S....

251

Impacts of the 2009 IECC for Residential Buildings at State Level  

NLE Websites -- All DOE Office Websites (Extended Search)

BUILDING ENERGY CODES PROGRAM Impacts of the 2009 IECC for Residential Buildings at State Level September 2009 Prepared by Pacific Northwest National Laboratory for the U.S....

252

Marietta Power & Water - Residential Energy Efficiency Rebate...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Marietta Power & Water - Residential Energy Efficiency Rebate Program Marietta Power & Water - Residential Energy Efficiency Rebate Program Eligibility Residential Savings For...

253

Burlington Electric Department - Residential Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Energy Efficiency Rebate Program Burlington Electric Department - Residential Energy Efficiency Rebate Program Eligibility Residential Savings For Appliances &...

254

Columbia Rural Electric Association - Residential Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Energy Efficiency Rebate Program Columbia Rural Electric Association - Residential Energy Efficiency Rebate Program Eligibility Residential Savings For Home...

255

Ozarks Electric Cooperative - Residential Energy Efficiency Loan...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Ozarks Electric Cooperative - Residential Energy Efficiency Loan Program Ozarks Electric Cooperative - Residential Energy Efficiency Loan Program Eligibility Residential Savings...

256

Southwest Electric Cooperative - Residential Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Southwest Electric Cooperative - Residential Energy Efficiency Rebate Program Southwest Electric Cooperative - Residential Energy Efficiency Rebate Program Eligibility Residential...

257

Kirkwood Electric - Residential Energy Efficiency Rebate Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Kirkwood Electric - Residential Energy Efficiency Rebate Program Kirkwood Electric - Residential Energy Efficiency Rebate Program Eligibility Residential Savings For Heating &...

258

Central Electric Cooperative - Residential Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Energy Efficiency Rebate Programs Central Electric Cooperative - Residential Energy Efficiency Rebate Programs Eligibility Construction Residential Savings For Other...

259

Cherokee Electric Cooperative - Residential Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cherokee Electric Cooperative - Residential Energy Efficiency Loan Programs Cherokee Electric Cooperative - Residential Energy Efficiency Loan Programs Eligibility Residential...

260

SRP - Residential Energy Efficiency Rebate Program | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SRP - Residential Energy Efficiency Rebate Program SRP - Residential Energy Efficiency Rebate Program Eligibility Residential Savings For Home Weatherization Commercial...

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Barron Electric Cooperative - Residential Energy Resource Conservation...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Energy Resource Conservation Loan Program Barron Electric Cooperative - Residential Energy Resource Conservation Loan Program Eligibility Residential Savings For Home...

262

Cedar Falls Utilities - Residential Energy Efficiency Rebate...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Energy Efficiency Rebate Program Cedar Falls Utilities - Residential Energy Efficiency Rebate Program Eligibility Residential Savings For Heating & Cooling Commercial...

263

Minnesota Valley Electric Cooperative -Residential Energy Resource...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Energy Resource Conservation Loan Program Minnesota Valley Electric Cooperative -Residential Energy Resource Conservation Loan Program Eligibility Residential Savings...

264

Lake Region Electric Cooperative - Residential Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Region Electric Cooperative - Residential Energy Efficiency Rebate Program Lake Region Electric Cooperative - Residential Energy Efficiency Rebate Program Eligibility Residential...

265

Impacts of the 2009 IECC for Residential Buildings at State Level - Wisconsin  

NLE Websites -- All DOE Office Websites (Extended Search)

Wisconsin Wisconsin September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN WISCONSIN BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN WISCONSIN Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Wisconsin Summary The energy efficiency requirements in the Wisconsin building code are the 2006 International Energy Conservation Code (IECC) with amendments that increase stringency. The 2009 IECC contains several major improvements in energy efficiency over the 2006 IECC and the Wisconsin code for the total building energy

266

Better Buildings Residential Program Solution Center Demonstration  

NLE Websites -- All DOE Office Websites (Extended Search)

* Tour: Navigation Options * Tour: Examples * Next Steps * Questions & Feedback 2 eere.energy.gov Overview 3 eere.energy.gov Purpose: Support Residential Energy Efficiency...

267

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

E-Print Network (OSTI)

and S.P. Jamieson, DC Microgrids: Benefits and Barriers.of direct-DC and DC microgrids in residential and commercial

Garbesi, Karina

2012-01-01T23:59:59.000Z

268

Combined Heat and Power for Saving Energy and Carbon in Residential Buildings  

E-Print Network (OSTI)

This section describes four micro CHP prime movers. Eachtime frame, the Stirling micro-CHP packages are targeted toComparison of residential micro CHP technologies to separate

2000-01-01T23:59:59.000Z

269

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

E-Print Network (OSTI)

for Renewables and Efficiency: Net Metering Policies SummaryDC residential distribution. Net-Metering Because the gridgrid-connected [33]. Net metering makes grid-connected PV

Garbesi, Karina

2012-01-01T23:59:59.000Z

270

A new database of residential building measures and estimated costs helps the U.S. building industry determine the most  

E-Print Network (OSTI)

A new database of residential building measures and estimated costs helps the U.S. building at the National Renewable Energy Laboratory (NREL) have developed the National Residential Efficiency Measures with using various measures to improve the efficiency of residential buildings. This database offers

271

Alabama State Certification of Residential Building Codes | Building...  

NLE Websites -- All DOE Office Websites (Extended Search)

Name: Adams Initials: TL Affiliation: Alabama Department of Economic and Community Affairs Focus: Adoption Building Type: Residential Code Referenced: 2009 IECC 2009 IRC...

272

Buildings Energy Data Book  

Buildings Energy Data Book (EERE)

Most Popular Tables PDFXLS 3.1.4 2010 Commercial Energy End-Use Splits, by Fuel Type PDFXLS 1.1.1 U.S. Residential and Commercial Buildings Total Primary Energy Consumption PDFXLS...

273

Home > Households, Buildings & Industry > Energy Efficiency Page ...  

U.S. Energy Information Administration (EIA)

Home > Households, Buildings & Industry > Energy Efficiency Page > Energy Intensities > Table 8b Glossary U.S. Residential Buildings Primary Energy Intensity

274

Background to the development process, Automated Residential Energy Standard (ARES) in support of proposed interim energy conservation voluntary performance standards for new non-federal residential buildings: Volume 3  

SciTech Connect

This report documents the development and testing of a set of recommendations generated to serve as a primary basis for the Congressionally-mandated residential standard. This report treats only the residential building recommendations.

1989-09-01T23:59:59.000Z

275

HUMAN DISEASE FROM RADON EXPOSURES: THE IMPACT OF ENERGY CONSERVATION IN RESIDENTIAL BUILDINGS  

SciTech Connect

The level of radon and its daughters inside conventional buildings is often higher than the ambient background level. Interest in conserving energy is motivating homeowners and builers to reduce ventilation and hence to increase the concentration of indoor generated air contaminants, including radon. It is unliekly that the current radiation levels in conventional homes and buildings from radon daughters could account for a significant portion of the lung cancer rate in non-smokers. However, it is likely that some increased lung cancer risk would result from increased radon exposures; hence, it is prudent not to allow radon concentrations to rise significantly. There are several ways to implement energy conservation measures without increasing risks.

Budnitz, R.J.; Berk, J.V.; Hollowell, C.D.; Nazaroff, W.W.; Nero, A.V.; Rosenfeld, A.H.

1979-07-01T23:59:59.000Z

276

Impacts of the 2009 IECC for Residential Buildings at State Level - Delaware  

NLE Websites -- All DOE Office Websites (Extended Search)

Delaware Delaware September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN DELAWARE BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN DELAWARE Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Delaware Summary Delaware recently adopted the 2009 International Energy Conservation Code (IECC). The code becomes effective July 1, 2010. Overview of the 2009 IECC The IECC scope includes residential single-family housing and multifamily housing three stories or less above-

277

Impacts of the 2009 IECC for Residential Buildings at State Level - New Hampshire  

NLE Websites -- All DOE Office Websites (Extended Search)

Hampshire Hampshire September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEW HAMPSHIRE BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEW HAMPSHIRE Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in New Hampshire Summary New Hampshire has adopted the 2009 International Energy Conservation Code (IECC). The code becomes effective October 1, 2009. Overview of the 2009 IECC The IECC scope includes residential single-family housing and multifamily housing three stories or less above-

278

The Path to Low Energy Residential Design  

Science Conference Proceedings (OSTI)

The Department of EnergyBuilding Technologies Program is divided between the commercial and residential sectors. Under the residential sector, two main areas exist - Home Performance with Energy Star, and the Building America program. The Building America program focuses on improving the efficiency of the approximately 1.5 million new homes built each year. These improvements are accomplished through research, development, demonstrations, and technology transfer of system-based strategies. These efforts...

2009-12-16T23:59:59.000Z

279

Building Distributed Energy Performance Optimization for China a Regional Analysis of Building Energy Costs and CO2 Emissions  

E-Print Network (OSTI)

as building’s energy load profile, city’s solar radiationthe buildingsenergy load profiles. The annual energythe buildingsenergy load profiles. The Chinese residential

Feng, Wei

2013-01-01T23:59:59.000Z

280

RESIDENTIAL ENERGY CONSUMPTION SURVEY 1997 CONSUMPTION AND ...  

U.S. Energy Information Administration (EIA)

Residential Sector energy Intensities for 1978-1997 using data from EIA Residential Energy Consumption Survey.

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

PPL Electric Utilities - Residential Energy Efficiency Rebate...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Energy Efficiency Rebate Program PPL Electric Utilities - Residential Energy Efficiency Rebate Program Eligibility Multi-Family Residential Residential Savings For Home...

282

Atmos Energy (Gas) - Residential Efficiency Program | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Atmos Energy (Gas) - Residential Efficiency Program Atmos Energy (Gas) - Residential Efficiency Program Eligibility Low-Income Residential Residential Savings For Heating & Cooling...

283

Benton PUD - Residential Energy Efficiency Rebate Programs |...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Energy Efficiency Rebate Programs Benton PUD - Residential Energy Efficiency Rebate Programs Eligibility Multi-Family Residential Residential Savings For Appliances &...

284

Energy Data Sourcebook for the U.S. Residential Sector  

E-Print Network (OSTI)

Cason. 1990. Residential Energy Usage Comparison Project: AnResearch, Inc. 1985. Energy Usage Analysis of Residentialthere are few data on the energy usage of new buildings,

Wenzel, T.P.

2010-01-01T23:59:59.000Z

285

Analysis of federal policy options for improving US lighting energy efficiency: Commercial and residential buildings  

SciTech Connect

The US Department of Energy (DOE) has recognized the opportunity to achieve energy, economic, and environmental benefits by promoting energy-efficient lighting through federal policies, including lighting standards, financial incentives, and information programs. To assist in this process, the Office of Conservation and Renewable Energy`s Office of Codes and Standards invited Lawrence Berkeley Laboratory to assess prospective national impacts for a variety of policy options. Some progress has already been made in developing lighting policies at both the federal and state levels. The US DOE`s Office of Building Technologies has evaluated lighting efficiency incentives as part of its analysis for the National Energy Strategy. Fluorescent and incandescent lamp standards are included in the national Energy Policy Act of 1992 (P.L. 102-486, October 24, 1992). A few states have analyzed or implemented lamp and luminaire standards. Many policy-related issues merit further investigation. For example, there is considerable debate over issues such as mandatory or voluntary standards versus component labeling and other education-oriented strategies. Several different technologies are involved that interact with each other-lamps (incandescent, compact fluorescent, and HID), ballasts (for fluorescent and HID lamps), and fixtures with reflectors and lenses. Control systems and operation patterns must also be considered (timers, automated dimming, or occupancy sensors). Lighting applications are diverse, ranging from offices, restaurants, hallways, hospital operating rooms, to exterior lights. Lighting energy use influences heating and cooling requirements in buildings. Successful lighting system design must also address interactions between architectural design elements and daylighting availability. Proper system installation and ongoing operation and maintenance are crucial. The economic aspects of the preceding points must also be considered for policy making.

Atkinson, B.A.; McMahon, J.E.; Mills, E.; Chan, P.; Chan, T.W.; Eto, J.H.; Jennings, J.D.; Koomey, J.G.; Lo, K.W.; Lecar, M.; Price, L.; Rubinstein, F.; Sezgen, O.; Wenzel, T.

1992-12-01T23:59:59.000Z

286

Hellenic renewable energy policies and energy performance of residential buildings using solar collectors for domestic hot water production in Greece  

Science Conference Proceedings (OSTI)

Total final energy consumption in Hellenic buildings reached 6.5 × 106 tons of oil equivalent (Mtoe) or 34.2% of the total (2010)

2013-01-01T23:59:59.000Z

287

Analysis of federal policy options for improving US lighting energy efficiency: Commercial and residential buildings  

Science Conference Proceedings (OSTI)

The US Department of Energy (DOE) has recognized the opportunity to achieve energy, economic, and environmental benefits by promoting energy-efficient lighting through federal policies, including lighting standards, financial incentives, and information programs. To assist in this process, the Office of Conservation and Renewable Energy's Office of Codes and Standards invited Lawrence Berkeley Laboratory to assess prospective national impacts for a variety of policy options. Some progress has already been made in developing lighting policies at both the federal and state levels. The US DOE's Office of Building Technologies has evaluated lighting efficiency incentives as part of its analysis for the National Energy Strategy. Fluorescent and incandescent lamp standards are included in the national Energy Policy Act of 1992 (P.L. 102-486, October 24, 1992). A few states have analyzed or implemented lamp and luminaire standards. Many policy-related issues merit further investigation. For example, there is considerable debate over issues such as mandatory or voluntary standards versus component labeling and other education-oriented strategies. Several different technologies are involved that interact with each other-lamps (incandescent, compact fluorescent, and HID), ballasts (for fluorescent and HID lamps), and fixtures with reflectors and lenses. Control systems and operation patterns must also be considered (timers, automated dimming, or occupancy sensors). Lighting applications are diverse, ranging from offices, restaurants, hallways, hospital operating rooms, to exterior lights. Lighting energy use influences heating and cooling requirements in buildings. Successful lighting system design must also address interactions between architectural design elements and daylighting availability. Proper system installation and ongoing operation and maintenance are crucial. The economic aspects of the preceding points must also be considered for policy making.

Atkinson, B.A.; McMahon, J.E.; Mills, E.; Chan, P.; Chan, T.W.; Eto, J.H.; Jennings, J.D.; Koomey, J.G.; Lo, K.W.; Lecar, M.; Price, L.; Rubinstein, F.; Sezgen, O.; Wenzel, T.

1992-12-01T23:59:59.000Z

288

Buildings Energy Data Book: 2.1 Residential Sector Energy Consumption  

Buildings Energy Data Book (EERE)

4 4 Primary Energy Consumption Total Per Household 1980 79.6 N.A. 123.5 15.72 197.4 1981 82.8 N.A. 114.2 15.23 184.0 1982 83.7 N.A. 114.6 15.48 184.9 1983 84.6 N.A. 110.6 15.38 181.9 1984 86.3 N.A. 113.9 15.90 184.2 1985 87.9 N.A. 111.7 16.02 182.3 1986 89.1 N.A. 108.4 15.94 178.8 1987 90.5 N.A. 108.2 16.21 179.1 1988 92.0 N.A. 112.7 17.12 186.0 1989 93.5 N.A. 113.7 17.76 190.0 1990 94.2 N.A. 102.7 16.92 179.5 1991 95.3 N.A. 104.6 17.38 182.4 1992 96.4 N.A. 104.7 17.31 179.6 1993 97.7 N.A. 107.5 18.19 186.1 1994 98.7 N.A. 105.2 18.08 183.2 1995 100.0 N.A. 104.6 18.49 185.0 1996 101.0 N.A. 110.2 19.48 192.9 1997 102.2 N.A. 104.4 18.94 185.3 1998 103.5 N.A. 98.9 18.93 182.8 1999 104.9 N.A. 101.5 19.53 186.1 2000 105.7 N.A. 105.6 20.37 192.7 2001 107.0 1.7% 102.1 20.01 187.0 2002 105.0 3.3% 106.6 20.75 197.7 2003 105.6 5.2% 109.2 21.07 199.6 2004 106.6 7.1% 106.6 21.06 197.6 2005 108.8 9.0% 105.7 21.59

289

Minnesota Energy Resources (Gas) - Residential Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Agencies You are here Home Savings Minnesota Energy Resources (Gas) - Residential Energy Efficiency Rebate Program Minnesota Energy Resources (Gas) - Residential Energy...

290

Building Technologies Office: Residential Furnaces and Boilers Framework  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential Furnaces Residential Furnaces and Boilers Framework Meeting to someone by E-mail Share Building Technologies Office: Residential Furnaces and Boilers Framework Meeting on Facebook Tweet about Building Technologies Office: Residential Furnaces and Boilers Framework Meeting on Twitter Bookmark Building Technologies Office: Residential Furnaces and Boilers Framework Meeting on Google Bookmark Building Technologies Office: Residential Furnaces and Boilers Framework Meeting on Delicious Rank Building Technologies Office: Residential Furnaces and Boilers Framework Meeting on Digg Find More places to share Building Technologies Office: Residential Furnaces and Boilers Framework Meeting on AddThis.com... About Standards & Test Procedures Implementation, Certification & Enforcement

291

Home > Households, Buildings & Industry > Energy Efficiency ...  

U.S. Energy Information Administration (EIA)

Glossary Home > Households, Buildings & Industry > Energy Efficiency > Residential Buildings Energy Intensities > Table 4 Total Square Feet of U.S. Housing Units

292

Impacts of the 2009 IECC for Residential Buildings at State Level - Missouri  

NLE Websites -- All DOE Office Websites (Extended Search)

Missouri Missouri September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN MISSOURI BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN MISSOURI Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Missouri Summary Missouri currently does not have a mandatory energy efficiency code. The 2009 International Energy Conservation Code (IECC) would substantially improve energy efficiency in Missouri homes. A limited analysis of the impact of the 2009 IECC resulted in estimated savings of $353 to $565 a year for an average

293

Impacts of the 2009 IECC for Residential Buildings at State Level - Texas  

NLE Websites -- All DOE Office Websites (Extended Search)

Texas Texas September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN TEXAS BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN TEXAS Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Texas Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2001 IECC Supplement. The most notable changes are improved duct sealing and efficient lighting requirements. An energy analysis comparing the 2009 IECC to the state code

294

Impacts of the 2009 IECC for Residential Buildings at State Level - Mississippi  

NLE Websites -- All DOE Office Websites (Extended Search)

Mississippi Mississippi September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN MISSISSIPPI BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN MISSISSIPPI Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Mississippi Summary Mississippi currently does not have a mandatory energy efficiency code. The 2009 International Energy Conservation Code (IECC) would substantially improve energy efficiency in Mississippi homes. A limited analysis of the impact of the 2009 IECC resulted in estimated savings of $173 to $250 a year for an average

295

Impacts of the 2009 IECC for Residential Buildings at State Level - Alaska  

NLE Websites -- All DOE Office Websites (Extended Search)

Alaska Alaska September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN ALASKA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN ALASKA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Alaska Summary The 2009 International Energy Conservation Code (IECC) contains several improvements in energy efficiency over the current state code, the 2006 IECC with amendments. The most notable changes are improved duct sealing and efficient lighting requirements. A comparison of the overall impacts on energy use for these two

296

Buildings Energy Data Book: 2.5 Residential Construction and Housing Market  

Buildings Energy Data Book (EERE)

8 8 2009 Sales Price and Construction Cost Breakdown of an Average New Single-Family Home ($2010) (1) Function Finished Lot 20% Construction Cost 59% Financing 2% Overhead & General Expenses 5% Marketing 1% Sales Commission 3% Profit 9% Total 100% Function Building Permit Fees 2% Impact Fees 1% Water and Sewer Inspection 2% Excavation, Foundation, & Backfill 7% Steel 1% Framing and Trusses 16% Sheathing 2% Windows 3% Exterior Doors 1% Interior Doors & Hardware 2% Stairs 1% Roof Shingles 4% Siding 6% Gutters & Downspouts 0% Plumbing 5% Electrical Wiring 4% Lighting Fixtures 1% HVAC 4% Insulation 2% Drywall 5% Painting 3% Cabinets, Countertops 6% Appliances 2% Tiles & Carpet 5% Trim Material 3% Landscaping & Sodding 3% Wood Deck/Patio 1% Asphalt Driveway 1% Other 9% Total 100% Note(s): Source(s): NAHB, Breaking Down House Price and Construction Costs, 2010, Table 1; and EIA, Annual Energy Review 2010, Oct. 2011, Appendix D, p. 353 for price

297

Residential and commercial buildings data book. Second edition  

SciTech Connect

This Data Book updates and expands the previous Data Book originally published by the Department of Energy in October, 1984 (DOE/RL/01830/16). Energy-related information is provided under the following headings: Characteristics of Residential Buildings in the US; Characteristics of New Single Family Construction in the US; Characteristics of New Multi-Family Construction in the US; Household Appliances; Residential Sector Energy Consumption, Prices, and Expenditures; Characteristics of US Commercial Buildings; Commercial Buildings Energy Consumption, Prices, and Expenditures; Additional Buildings and Community Systems Information. This Data Book complements another Department of Energy document entitled ''Overview of Building Energy Use and Report of Analysis-1985'' October, 1985 (DOE/CE-0140). The Data Book provides supporting data and documentation to the report.

Crumb, L.W.; Bohn, A.A.

1986-09-01T23:59:59.000Z

298

How much energy is consumed in residential and commercial ...  

U.S. Energy Information Administration (EIA)

How much energy is consumed in residential and commercial buildings in the United States? Nearly 40% of total U.S. energy consumption in 2012 was consumed in ...

299

Central Georgia EMC- Residential Energy Efficiency Rebate Program  

Energy.gov (U.S. Department of Energy (DOE))

Central Georgia Electric Member Corporation (CGEMC) offers rebates for residential customers to increase the energy efficiency of existing homes or to build new energy efficient homes. This year,...

300

National Residential Efficiency Measures Database Aimed at Reducing Risk for Residential Retrofit Industry (Fact Sheet), Building America: Technical Highlight, Building Technologies Program (BTP)  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential Residential Efficiency Measures Database Aimed at Reducing Risk for Residential Retrofit Industry Researchers at the U.S. Department of Energy (DOE) National Renewable Energy Laboratory (NREL) have developed the National Residential Efficiency Measures Database, a public database that characterizes the performance and costs of common residential energy efficiency measures. The data are available for use in software programs that evaluate cost- effective retrofit measures to improve the energy efficiency of residential buildings. This database: * Provides information in a standardized format. * Improves the technical consistency and accuracy of the results of software programs. * Enables experts and stakeholders to view the retrofit information and provide comments to improve data

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

MidAmerican Energy (Electric) - Residential Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electric) - Residential Energy Efficiency Rebate Programs MidAmerican Energy (Electric) - Residential Energy Efficiency Rebate Programs < Back Eligibility Residential Savings...

302

Impacts of the 2009 IECC for Residential Buildings at State Level - Michigan  

NLE Websites -- All DOE Office Websites (Extended Search)

Michigan Michigan September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN MICHIGAN BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN MICHIGAN Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Michigan Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2003 IRC with considerable amendments. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in

303

Impacts of the 2009 IECC for Residential Buildings at State Level - Nebraska  

NLE Websites -- All DOE Office Websites (Extended Search)

Nebraska Nebraska September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEBRASKA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEBRASKA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Nebraska Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2003 IECC. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in estimated savings of $236 a year

304

Impacts of the 2009 IECC for Residential Buildings at State Level - Utah  

NLE Websites -- All DOE Office Websites (Extended Search)

Utah Utah September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN UTAH BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN UTAH Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Utah Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2006 IECC. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in estimated savings of $219 to

305

Impacts of the 2009 IECC for Residential Buildings at State Level - Nevada  

NLE Websites -- All DOE Office Websites (Extended Search)

Nevada Nevada September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEVADA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEVADA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Nevada Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2006 IECC. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in estimated savings of $205 to

306

Impacts of the 2009 IECC for Residential Buildings at State Level - Virginia  

NLE Websites -- All DOE Office Websites (Extended Search)

Virginia Virginia September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN VIRGINIA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN VIRGINIA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Virginia Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2006 IRC and IECC. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in estimated savings of

307

Impacts of the 2009 IECC for Residential Buildings at State Level - New York  

NLE Websites -- All DOE Office Websites (Extended Search)

York York September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEW YORK BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEW YORK Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in New York Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2004 IECC Supplement with amendments. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in

308

Impacts of the 2009 IECC for Residential Buildings at State Level - New Jersey  

NLE Websites -- All DOE Office Websites (Extended Search)

Jersey Jersey September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEW JERSEY BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEW JERSEY Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in New Jersey Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2006 IECC with extensive amendments. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in

309

Impacts of the 2009 IECC for Residential Buildings at State Level - Iowa  

NLE Websites -- All DOE Office Websites (Extended Search)

Iowa Iowa September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN IOWA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN IOWA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Iowa Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2006 IECC. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in estimated savings of $245 to

310

Impacts of the 2009 IECC for Residential Buildings at State Level - Oklahoma  

NLE Websites -- All DOE Office Websites (Extended Search)

Oklahoma Oklahoma September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN OKLAHOMA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN OKLAHOMA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Oklahoma Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2003 IECC. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in estimated savings of $266 to

311

Impacts of the 2009 IECC for Residential Buildings at State Level - Tennessee  

NLE Websites -- All DOE Office Websites (Extended Search)

Tennessee Tennessee September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN TENNESSEE BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN TENNESSEE Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Tennessee Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2003 IECC. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in estimated savings of $231 to

312

System design and dynamic signature identification for intelligent energy management in residential buildings.  

E-Print Network (OSTI)

Energy Information Administration, Oce of Energy Markets andEnergy Information Administration, Oce of Energy Markets and

Jang, Jaehwi

2008-01-01T23:59:59.000Z

313

DOE Buildings Performance Database, sample Residential data | OpenEI  

Open Energy Info (EERE)

Buildings Performance Database, sample Residential data Buildings Performance Database, sample Residential data Dataset Summary Description This is a non-proprietary subset of DOE's Buildings Performance Database. Buildings from the cities of Dayton, OH and Gainesville, FL areas are provided as an example of the data in full database. Sample data here is formatted as CSV The Buildings Performance Database will have an API that allows access to the statistics about the data without exposing private information about individual buildings. The data available in this sample is limited due to the nature of the original datasets; the Buildings Performance database combines data from multiple sources to improve overall robustness. Data fields stored in the database can be seen in the BPD taxonomy: http://www1.eere.energy.gov/buildings/buildingsperformance/taxonomy.html

314

Buildings Energy Data Book: 8.2 Residential Sector Water Consumption  

Buildings Energy Data Book (EERE)

1 1 Residential Water Use by Source (Million Gallons per Day) Year 1980 3,400 1985 3,320 1990 3,390 1995 3,390 2000 (3) (3) 3,590 2005 3,830 Note(s): Source(s): 29,430 25,600 1) Public supply water use: water withdrawn by public and private water suppliers that furnish water to at least 25 people or have a minimum of 15 connections. 2) Self-supply water use: Water withdrawn from a groundwater or surface-water source by a user rather than being obtained from a public supply. 3) USGS did not provide estimates of residential use from public supplies in 2000. This value was estimated based on the residential portion of public supply in 1995 and applied to the total public supply water use in 2000. U.S. Geological Survey, Estimated Use of Water in the U.S. in 1985, U.S. Geological Survey Circular 1004, 1988; U.S. Geological Survey, Estimated Use of

315

Building Technologies Program: Tax Incentives for Residential Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Program Tax Incentives for Residential Buildings On this page you'll find information about the tax deductions available for purchasing and installing energy-efficient products and constructing new energy-efficient homes. The American Recovery and Reinvestment Act of 2009 offers tax credits for residential energy efficiency measures and renewable energy systems. Many of these credits were originally introduced in the Energy Policy Act of 2005 (EPACT) and amended in the Emergency Economic Stabilization Act of 2008 (P.L. 110-343). Energy Efficiency Tax Credits for Existing Homes Homeowners are eligible for a tax credit of 30% of the cost for improvements to windows, roofing, insulation, and heating and cooling equipment. These improvements must be placed in service from January 1, 2009 through December 31, 2010 and there is a limit of $1,500 for all products. Improvements made in 2008 are not eligible for a tax credit. See the ENERGY STAR® Web site for a detailed listing of eligible improvements.

316

Window-Related Energy Consumption in the US Residential and Commercial Building Stock  

E-Print Network (OSTI)

commercial). National Energy Consumption Estimates We usedsection entitled “National Energy Consumption Estimates”).section entitled “National Energy Consumption Estimates”).

Apte, Joshua; Arasteh, Dariush

2008-01-01T23:59:59.000Z

317

Building Energy Code | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Building Energy Code Building Energy Code Building Energy Code < Back Eligibility Commercial Multi-Family Residential Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Program Info State Ohio Program Type Building Energy Code Provider Ohio Department of Commerce ''Much of the information presented in this summary is drawn from the U.S. Department of Energy's (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more detailed information about building energy codes, visit the [http://www.energycodes.gov/states/ DOE] and [http://bcap-ocean.org/ BCAP] websites.'' The Board of Building Standards is the primary state agency that protects

318

Technical support documentation for the Automated Residential Energy Standard (ARES) in support of proposed interim energy conservation voluntary performance standards for new non-federal residential buildings: Volume 2  

SciTech Connect

The Automated Residential Energy Standard (ARES) program is designed to identify levels of thermal integrity (e.g., insulation levels, glazing layers, equipment efficiencies, etc.) that are cost effective for typical residential structures and to create a residential energy standard based on these levels. This document contains technical background the explains the data and the algorithms used by the program.

NONE

1989-09-01T23:59:59.000Z

319

Building Technologies Office: Advancing Building Energy Codes  

NLE Websites -- All DOE Office Websites (Extended Search)

Advancing Building Energy Codes Advancing Building Energy Codes The Building Technologies Office (BTO) supports greater adoption of residential and commercial building energy codes through collaborative efforts with local governments and industry groups, and by providing key tools and assistance for code development, adoption, and implementation. Through advancing building codes, we aim to improve building energy efficiency by 50%, and to help states achieve 90% compliance with their energy codes. 75% of U.S. Buildings will be New or Renovated by 2035, Building Codes will Ensure They Use Energy Wisely. Learn More 75% of U.S. Buildings will be New or Renovated by 2035; Building Codes will Ensure They Use Energy Wisely Learn More Energy Codes Ensure Efficiency in Buildings We offer guidance and technical resources to policy makers, compliance verification professionals, architects, engineers, contractors, and other stakeholders who depend on building energy codes.

320

System design and dynamic signature identification for intelligent energy management in residential buildings.  

E-Print Network (OSTI)

of commercial energy management systems, IEEE Transactionsfor intelligent energy management systems of resi- dentialin an intelligent energy management system, three approaches

Jang, Jaehwi

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Buildings Energy Data Book  

Buildings Energy Data Book (EERE)

8.1 Buildings Sector Water Consumption 8.1 Buildings Sector Water Consumption 8.2 Residential Sector Water Consumption 8.3 Commercial Sector Water Consumption 8.4 WaterSense 8.5 Federal Government Water Usage 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download the Entire Book Skip down to the tables This chapter includes data on water use in commercial and residential buildings and the energy needed to supply that water. The main points from this chapter are summarized below: In 2005, water use in the buildings sector was estimated at 39.6 billion gallons per day, which is nearly 10% of total water use in the United States. From 1985 to 2005, water use in the residential sector closely tracked population growth, while water use in the commercial sector grew almost twice as fast.

322

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

E-Print Network (OSTI)

Torchiere Source: [6]. Energy AC-DC Savings Conv.Effand fans unchanged Energy AC-DC Savings Conv.Eff Solar WaterFigure 10. Appliances energy savings versus direct-DC energy

Garbesi, Karina

2012-01-01T23:59:59.000Z

323

Buildings Energy Data Book: 8.2 Residential Sector Water Consumption  

Buildings Energy Data Book (EERE)

6 6 Residential Water Billing Rate Structures for Community Water Systems Rate Structure Uniform Rates Declining Block Rate Increasing Block Rate Peak Period or Seasonal Rate Separate Flat Fee Annual Connection Fee Combined Flat Fee Other Rate Structures Note(s): Source(s): 3.0% 9.0% 1) Systems serving more than 10,000 users provide service to 82% of the population served by community water systems. Columns do not sum to 100% because some systems use more than one rate structure. 2) Uniform rates charge a set price for each unit of water. Block rates charge a different price for each additional increment of usage. The prices for each increment is higher for increasing block rates and lower for decreasing block rates. Peak rates and seasonal rates charge higher prices when demand is highest. Flat fees charge a set price for

324

Buildings Energy Data Book: 7.3 Efficiency Standards for Residential HVAC  

Buildings Energy Data Book (EERE)

3 3 Efficiency Standards for Residential Boilers Effective for products manufactured before September 1, 2012 AFUE(%) (1) Boilers (excluding gas steam) Gas Steam Boilers Effective for products manufactured on or after September 1, 2012 (2) AFUE (%) (1) No Constant Burning Pilot Automatic Means for Adjusting Water Temperature Gas Steam No Constant Burning Pilot Oil Hot Water Automatic Means for Adjusting Water Temperature Oil Steam None Electric Hot water Automatic Means for Adjusting Water Temperature Electric Steam None Note(s): Source(s): 84 82 None None 1) Annual Fuel Utilization Efficiency. 2) Boilers manufactured to operate without any need for electricity, an electric connection, electric gauges, electric pumps, electric wires, or electric devices are not required to comply with the revised standards that take effect September 1,

325

Buildings Energy Data Book: 7.5 Efficiency Standards for Residential Appliances  

Buildings Energy Data Book (EERE)

3 3 Efficiency Standards for Residential Water Heaters (1) Effective for products manufactured from January 20, 2004 through April 15, 2015 Gas-Fired Storage Water Heaters Oil-Fired Water Heaters EF = 0.67 - (0.0019 x Rated Storage Volume in gallons) EF = 0.59 - (0.0019 x Rated Storage Volume in gallons) Instantaneous Gas-Fired Water Heaters Instantaneous Electric and Table Top Water Heaters EF = 0.62 - (0.0019 x Rated Storage Volume in gallons) EF = 0.93 - (0.00132 x Rated Storage Volume in gallons) Electric Storage Water Heaters EF = 0.97 - (0.00132 x Rated Storage Volume in gallons) Effective for products manufactured on or after April 16, 2015 Gas-Fired Storage Water Heaters Rated Storage Volume ≤ 55 gallons EF = 0.675 - (0.0015 x Rated Storage Volume in gallons)

326

Calculation of NOx Emissions Reductions From Energy Efficient Residential Building Construction in Texas  

E-Print Network (OSTI)

Four areas in Texas have been designated by the United States Environmental Protection Agency (EPA) as non-attainment areas because ozone pollution levels exceed the National Ambient Air Quality Standard (NAAQS) maximum allowable limits. These areas face severe sanctions if attainment is not reached by 2007. This paper provides an overview of the procedures that have been developed and used to calculate the electricity savings and NOx reductions from code-compliant residential construction in non-attainment and affected counties. This paper reviews the calculation methods and presents results that show the 2003 annual electricity and natural gas savings and NOx reductions from implementation of the 2000 IECC to single-family and multi-family residences in 2003, which use a code-tracable DOE-2 simulation. A discussion of the development of a web-based emissions reductions calculator is also discussed.

Haberl, J. S.; Culp, C.; Gilman, D.; Yazdani, B.; Fitzpatrick, T.; Muns, S.

2006-05-23T23:59:59.000Z

327

Calculation of Nox Emissions Reductions from Energy Efficient Residential Building Construction in Texas  

E-Print Network (OSTI)

Four areas in Texas have been designated by the United States Environmental Protection Agency (EPA) as non-attainment areas because ozone pollution levels exceed the National Ambient Air Quality Standard (NAAQS) maximum allowable limits. These areas face severe sanctions if attainment is not reached by 2007. This paper provides an overview of the procedures that have been developed and used to calculate the electricity savings and NOx reductions from code-compliant residential construction in non-attainment and affected counties. This paper reviews the calculation methods and presents results that show the 2003 annual electricity and natural gas savings and NOx reductions from implementation of the 2000 IECC to single-family and multi-family residences in 2003, which use a code-traceable DOE-2 simulation. A discussion of the development of a web-based emissions reductions calculator is also discussed.

Haberl, J.; Culp, C.; Gilman, D.; Baltazar-Cervantes, J. C.; Yazdani, B.; Fitzpatrick, T.; Muns, S.; Verdict, M.

2004-01-01T23:59:59.000Z

328

Investigation of Peak Load Reduction Strategies in Residential Buildings in Cooling Dominated Climates.  

E-Print Network (OSTI)

??This investigation of peak load reduction strategies in residential buildings contributes to the global international efforts in reducing energy consumption and is related directly to… (more)

Atallah, Fady

2013-01-01T23:59:59.000Z

329

Impacts of the 2009 IECC for Residential Buildings at State Level - Rhode Island  

NLE Websites -- All DOE Office Websites (Extended Search)

Rhode Island Rhode Island September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN RHODE ISLAND BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN RHODE ISLAND Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Rhode Island Summary Rhode Island has adopted the 2009 International Energy Conservation Code (IECC). Overview of the 2009 IECC The IECC scope includes residential single-family housing and multifamily housing three stories or less above- grade intended for permanent living (hotel/motel is not "residential"). The code applies to new buildings and

330

Impacts of the 2009 IECC for Residential Buildings at State Level - Illinois  

NLE Websites -- All DOE Office Websites (Extended Search)

Illinois Illinois September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN ILLINOIS BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN ILLINOIS Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Illinois Summary Illinois recently adopted the 2009 International Energy Conservation Code (IECC). Overview of the 2009 IECC The IECC scope includes residential single-family housing and multifamily housing three stories or less above- grade intended for permanent living (hotel/motel is not "residential"). The code applies to new buildings and

331

Reading Municipal Light Department - Residential ENERGY STAR...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential ENERGY STAR Appliance Rebate Program Reading Municipal Light Department - Residential ENERGY STAR Appliance Rebate Program Eligibility Residential Savings For Heating &...

332

Lane Electric Cooperative - Residential Energy Efficiency Loan...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Efficiency Loan Programs Lane Electric Cooperative - Residential Energy Efficiency Loan Programs Eligibility Multi-Family Residential Residential Savings For Home...

333

City of Portland - Streamlined Building Permits for Residential Solar  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Residential Savings Category Solar Buying & Making Electricity Heating & Cooling Water Heating Program Info State Oregon Program Type Green Building Incentive Provider City of Portland The City of Portland's Bureau of Development Services (BDS) developed an electronic permitting process for residential solar energy system installations. With this streamlined, expedited process, solar contractors can submit the project plans and permit application online for residential installations. In order to file the online application, the contractor must first be trained. The City of Portland has staff at the permitting desk trained as solar experts to assist solar contractors who need help filing their permits in person. This process has a turnaround time of approximately 2-3 business days for building permits.

334

Energy and air quality implications of passive stack ventilation in residential buildings  

E-Print Network (OSTI)

third of the total space conditioning energy consumption ofventilation increased space conditioning energy use by aboutis dominated by space conditioning rather than mechanical

Mortensen, Dorthe Kragsig

2011-01-01T23:59:59.000Z

335

Buildings Energy Data Book: 7.3 Efficiency Standards for Residential...  

Buildings Energy Data Book (EERE)

Federal Regulations, Part 430 - Energy Conservation Program for Consumer Products, Subpart C - Energy and Water Conservation Standards and Their Effective Dates. January 1, 2010....

336

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

E-Print Network (OSTI)

Solar Market Trends 2009, 2010, Interstate Renewable EnergyMarket-Trends-Report- 2010_7-27-10_web1.pdf Solar Energy

Garbesi, Karina

2012-01-01T23:59:59.000Z

337

Solar energy and multi-storey residential buildings Larry Hughes and Tylor Wood  

E-Print Network (OSTI)

Factsheet on Summer Heat Gain and Winter Heat Loss In the summer we often feel warm in buildings and in the winter we may feel cold. This may be due to heating from solar gain and heat loss during the winter (see that you stay cool or warm. You can: · Draw blinds to stop solar gain and winter losses · You can wear

Hughes, Larry

338

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

E-Print Network (OSTI)

appliance converters were estimated using external power supply (EPS) data from the Energy Star database

Garbesi, Karina

2012-01-01T23:59:59.000Z

339

Determination for the 2006 International Energy Conservation Code, Residential Buildings – Technical Support Document  

Science Conference Proceedings (OSTI)

Provides a technical analysis showing that the 2006 International Energy Conservation Code contains improvements in energy efficiency compared to its predecessor, the 2003 International Energy Conservation Code. DOE is required by law to issue "determinations" of whether or not new editions of the IECC improve energy efficiency.

Lucas, Robert G.

2009-09-26T23:59:59.000Z

340

Buildings Energy Data Book: 2.5 Residential Construction and Housing Market  

Buildings Energy Data Book (EERE)

2 2 2010 Five Largest Residential Homebuilders Homebuilder PulteGroup 5.3% D.R. Horton 5.9% NVR 3.1% Lennar Corporation 3.4% KB Home 2.3% Top Five Total 19.9% Habitat for Humanity (3) 0.1% Note(s): Source(s): 6,032 402 1) 2010 total U.S. new home closings were 323,000 (only single-family). 2) Total share of closings of top 20 builders was 35%. Total share of the top 100 builders was 54%. 3) Habitat for Humanity built more than 400 homes during the week of May 31, 2007; Habitat for Humanity has built over 1,000 homes in the New Orleans area since Hurricane Katrina. Habitat for Humanity's 2,100 worldwide affiliates have completed more than 200,000 homes since 1976, providing more than 1,000,000 with housing. Housing Giants Magazine, May 2011, Professional Builder's 2011 Housing Giants Rankings.

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Buildings Energy Data Book: 8.2 Residential Sector Water Consumption  

Buildings Energy Data Book (EERE)

2 2 1999 Single-Family Home Daily Water Consumption by End Use (Gallons per Capita) (1) Fixture/End Use Toilet 18.5 18.3% Clothes Washer 15 14.9% Shower 11.6 11.5% Faucet 10.9 10.8% Other Domestic 1.6 1.6% Bath 1.2 1.2% Dishwasher 1 1.0% Leaks 9.5 9.4% Outdoor Use (2) 31.7 31.4% Total (2) 101 100% Note(s): Source(s): Average gallons Total Use per capita per day Percent 1) Based analysis of 1,188 single-family homes at 12 study locations. 2) Total Water use derived from USGS. Outdoor use is the difference between total and indoor uses. American Water Works Association Research Foundation, Residential End Uses of Water, 1999; U.S. Geological Survey, Estimated Use of Water in the U.S. in 2000, U.S. Geological Survey Circular 1268, 2004, Table 6, p. 17; and Vickers, Amy, Handbook of Water Use and Conservation, June 2002, p. 15.

342

Firelands Electric Cooperative - Residential Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Firelands Electric Cooperative - Residential Energy Efficiency Rebate Program Firelands Electric Cooperative - Residential Energy Efficiency Rebate Program < Back Eligibility...

343

Southern Pine Electric Power Association - Residential Energy...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Southern Pine Electric Power Association - Residential Energy Efficiency Rebate Program Southern Pine Electric Power Association - Residential Energy Efficiency Rebate Program <...

344

South Alabama Electric Cooperative - Residential Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

South Alabama Electric Cooperative - Residential Energy Efficiency Loan Program South Alabama Electric Cooperative - Residential Energy Efficiency Loan Program Eligibility...

345

Central Alabama Electric Cooperative - Residential Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Central Alabama Electric Cooperative - Residential Energy Efficiency Rebate Program Central Alabama Electric Cooperative - Residential Energy Efficiency Rebate Program Eligibility...

346

Cookeville Electric Department - Residential Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cookeville Electric Department - Residential Energy Efficiency Rebate Program Cookeville Electric Department - Residential Energy Efficiency Rebate Program Eligibility Commercial...

347

Ozark Border Electric Cooperative - Residential Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Ozark Border Electric Cooperative - Residential Energy Efficiency Rebate Program Ozark Border Electric Cooperative - Residential Energy Efficiency Rebate Program Eligibility...

348

Central New Mexico Electric Cooperative - Residential Energy...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Mexico Electric Cooperative - Residential Energy Efficiency Rebate Program Central New Mexico Electric Cooperative - Residential Energy Efficiency Rebate Program Eligibility...

349

Buildings Energy Data Book: 2.5 Residential Construction and Housing Market  

Buildings Energy Data Book (EERE)

Construction Statistics of New Homes Completed/Placed Year Thousand Units Average SF Thousand Units Average SF 1980 234 1981 229 1982 234 1983 278 1984 288 1985 283 1986 256 1987 239 1988 224 1989 203 1990 195 1991 174 1992 212 1993 243 1994 291 1995 319 1996 338 1997 336 1998 374 1999 338 2000 281 2001 196 2002 174 2003 140 2004 124 2005 123 2006 112 2007 95 2008 81 2009 55 2010 50 Source(s): 496 2,392 155 1,172 701 DOC, 2010 Characteristics of New Housing, 2010, "Median and Average Square Feet of Floor Area in New Single-Family Houses Completed by Location", "Presence of Air-Conditioning in New Single Family Houses", "Number of Multifamily Units Completed by Number of Units Per Building", "Median and Average Square Feet of Floor Area in Units in New Multifamily Buildings Completed", "Placements of New Manufactured Homes by Region and Size of Home, 1980-

350

Buildings Energy Data Book: 7.5 Efficiency Standards for Residential...  

Buildings Energy Data Book (EERE)

Part 430 - Energy Conservation Program for Consumer Products, Subpart C - Energy and Water Conservation Standards and Their Effective Dates. January 1, 2010. 8,000-13,999 9.8...

351

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

E-Print Network (OSTI)

1344-1352. EIA. Solar Photovoltaic Cell/Module Manufacturingenergized by photovoltaic–wind/fuel cell hybrid energy

Garbesi, Karina

2012-01-01T23:59:59.000Z

352

Worldwide Status of Energy Standards for Buildings - Appendices  

E-Print Network (OSTI)

for NON-RESIDENTIAL BUILDINGS. This survey has been designedtypes of energy standards for buildings. Please respond asI: GENERAL OVERVIEW OF BUILDING ENERGY STANDARDS Does your

Janda, K.B.

2008-01-01T23:59:59.000Z

353

Building Energy Software Tools Directory: New Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Auditing & Sales Tool, home energy assessments, energy analysis, home performance, residential retrofits 2013-05-17 MyVerdafero Utility Optimization, building performance,...

354

Home > Households, Buildings & Industry > Energy Efficiency Page ...  

U.S. Energy Information Administration (EIA)

Home > Households, Buildings & Industry > Energy Efficiency Page > Energy Intensities >Table 7b Glossary U.S. Residential Housing Primary Energy Intensity

355

Residential Energy Display Devices  

Science Conference Proceedings (OSTI)

Residential energy display devices provide direct feedback to consumers about their electricity use and cost, direct feedback that potentially can help customers manage electricity consumption. EPRI tested five different stand-alone display devices in its Energy Efficiency and Demand Response Living Laboratory to assess whether devices functioned according to manufacturer specifications. In addition to providing results of these tests, this Technology Brief describes how display devices operate, summariz...

2008-06-20T23:59:59.000Z

356

System design and dynamic signature identification for intelligent energy management in residential buildings.  

E-Print Network (OSTI)

Demand Response Electrical Appliance Manager . . . . . TmoteDemand Responsive Electrical Appliance Manager), based on aheavy energy-consuming appliances such as air-conditioners,

Jang, Jaehwi

2008-01-01T23:59:59.000Z

357

Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Utah  

SciTech Connect

The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current Utah code, the 2006 IECC. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in estimated savings of $168 to $188 for an average new house in Utah at recent fuel prices.

Cole, Pamala C.; Lucas, Robert G.

2009-05-01T23:59:59.000Z

358

Window-Related Energy Consumption in the US Residential andCommercial Building Stock  

SciTech Connect

We present a simple spreadsheet-based tool for estimating window-related energy consumption in the United States. Using available data on the properties of the installed US window stock, we estimate that windows are responsible for 2.15 quadrillion Btu (Quads) of heating energy consumption and 1.48 Quads of cooling energy consumption annually. We develop estimates of average U-factor and SHGC for current window sales. We estimate that a complete replacement of the installed window stock with these products would result in energy savings of approximately 1.2 quads. We demonstrate that future window technologies offer energy savings potentials of up to 3.9 Quads.

Apte, Joshua; Arasteh, Dariush

2006-06-16T23:59:59.000Z

359

Recommendations for 15% Above-Code Energy Efficiency Measures for Residential Buildings  

E-Print Network (OSTI)

This report presents detailed information about the recommendations for achieving 15% above-code energy performance for single-family residences. The analysis was performed using a simulation model of an International Energy Conservation Code (IECC)-compliant, single family residence in Houston, Texas. To accomplish the 15% annual energy use reductions, twelve measures were considered including: tankless water heater, solar domestic water heating system, natural gas water heater without the standing pilot light, HVAC system including ducts in the conditioned space, improved duct sealing, increased air tightness, window shading and redistribution, improved window performance, and improved heating and cooling system efficiency. After the total annual energy use was determined for each measure, they were then grouped to accomplish a 15% total annual energy use reduction.

Montgomery, C.; Yazdani, B.; Culp, C.; Haberl, J. S.; Liu, Z.; Mukhopadhyay, J.; Malhotra, M.

2008-11-01T23:59:59.000Z

360

Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Kansas City, Missouri  

SciTech Connect

The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the 2006 IECC. The notable changes are: (1) Improved duct sealing verified by testing the duct system; (2) Increased duct insulation; (3) Improvement of window U-factors from 0.40 to 0.35; and (4) Efficient lighting requirements. An analysis of these changes resulted in estimated annual energy cost savings of about $145 a year for an average new house. Construction cost increases are estimated at $655. Home owners will experience an annual cost savings of close to $100 a year because reduction to energy bills will more than compensate for increased mortgage payments and other costs.

Lucas, Robert G.

2011-09-30T23:59:59.000Z

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Preliminary Assessment of the Energy-Saving Potential of Electrochromic Windows in Residential Buildings  

Science Conference Proceedings (OSTI)

Electrochromic windows provide variable tinting that can help control glare and solar heat gain. We used BEopt software to evaluate their performance in prototypical energy models of a single-family home.

Roberts, D. R.

2009-12-01T23:59:59.000Z

362

Buildings Energy Data Book  

Buildings Energy Data Book (EERE)

2.1 Residential Sector Energy Consumption 2.1 Residential Sector Energy Consumption 2.2 Residential Sector Characteristics 2.3 Residential Sector Expenditures 2.4 Residential Environmental Data 2.5 Residential Construction and Housing Market 2.6 Residential Home Improvements 2.7 Multi-Family Housing 2.8 Industrialized Housing 2.9 Low-Income Housing 3Commercial Sector 4Federal Sector 5Envelope and Equipment 6Energy Supply 7Laws, Energy Codes, and Standards 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download the Entire Book Skip down to the tables Chapter 2 focuses on energy use in the U.S. residential buildings sector. Section 2.1 provides data on energy consumption by fuel type and end use, as well as energy consumption intensities for different housing categories. Section 2.2 presents characteristics of average households and changes in the U.S. housing stock over time. Sections 2.3 and 2.4 address energy-related expenditures and residential sector emissions, respectively. Section 2.5 contains statistics on housing construction, existing home sales, and mortgages. Section 2.6 presents data on home improvement spending and trends. Section 2.7 describes the industrialized housing industry, including the top manufacturers of various manufactured home products. Section 2.8 presents information on low-income housing and Federal weatherization programs. The main points from this chapter are summarized below:

363

Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Mesa, Arizona  

SciTech Connect

The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the 2006 IECC and the 2003 IECC. The notable changes are: (1) Improved duct sealing verified by testing the duct system; (2) Increased duct insulation; (3) Improvement of window U-factors from 0.40 to 0.35; and (4) Efficient lighting requirements. An analysis of these changes resulted in estimated annual energy cost savings of $145 a year for an average new house compared to the 2003 IECC. This energy cost saving decreases to $125 a year for the 2009 IECC compared to the 2006 IECC. Construction cost increases (per home) for complying with the 2009 IECC are estimated at $1256 relative to the 2003 IECC and $800 for 2006 IECC. Home owners will experience an annual cost savings of about $80 a year by complying with the 2009 IECC because reduction to energy bills will more than compensate for increased mortgage payments and other costs.

Lucas, Robert G.

2011-03-31T23:59:59.000Z

364

Analysis of space heating and domestic hot water systems for energy-efficient residential buildings  

DOE Green Energy (OSTI)

An analysis of the best ways of meeting the space heating and domestic hot water (DHW) needs of new energy-efficient houses with very low requirements for space heat is provided. The DHW load is about equal to the space heating load in such houses in northern climates. The equipment options which should be considered are discussed, including new equipment recently introduced in the market. It is concluded that the first consideration in selecting systems for energy-efficient houses should be identification of the air moving needs of the house for heat distribution, heat storage, ventilation, and ventilative cooling. This is followed, in order, by selection of the most appropriate distribution system, the heating appliances and controls, and the preferred energy source, gas, oil, or electricity.

Dennehy, G

1983-04-01T23:59:59.000Z

365

Advanced Residential Buildings Research; Electricity, Resources, & Building Systems Integration (Fact Sheet)  

SciTech Connect

Factsheet describing the Advanced Residential Buildings Research group within NREL's Electricity, Resources, and Buildings Systems Integration Center.

Not Available

2009-09-01T23:59:59.000Z

366

Advanced Residential Buildings Research; Electricity, Resources, & Building Systems Integration (Fact Sheet)  

SciTech Connect

Factsheet describing the Advanced Residential Buildings Research group within NREL's Electricity, Resources, and Buildings Systems Integration Center.

2009-09-01T23:59:59.000Z

367

Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings  

E-Print Network (OSTI)

electricity consumption sketched above for a single future year –year 2035, in quads Reference Extended case Policies case 1 A: Total electricity consumptionyear period the PV system’s energy production (including inverter losses) equals the total annual AC- house electricity consumption.

Garbesi, Karina

2012-01-01T23:59:59.000Z

368

Residential Energy Audits  

E-Print Network (OSTI)

A series of events coupled with the last five years experience performing Residential Conservation Service (RCS) audits have resulted in renewed efforts by utilities to evaluate the role of residential energy audits. There are utilities where the RCS program is considered very successful; however, the majority of utilities have found that the costs far exceed the benefits. Typically, the response rates are low (less than 1% per year for Texas utilities), the audits primarily reach upper income persons, and consumers only implement the low-cost recommendations. The Texas PUC is on record as being opposed to the RCS as well as the Commercial and Apartment Conservation Service (CACS) and now requires Energy Efficiency Plans with detailed cost and savings information on utility end user programs.

Brown, W.

1985-01-01T23:59:59.000Z

369

Buildings Energy Data Book: 7.5 Efficiency Standards for Residential Appliances  

Buildings Energy Data Book (EERE)

4 4 Efficiency Standards for Wet Cleaning Equipment Effective from products manufactured from January 1, 2007 through December 31, 2011 Top-Loading, Compact (Capacity < 1.6 ft^3) Front-Loading, Compact (Capacity < 1.6 ft^3) Top-Loading, Semi-Automatic (1) Suds-Saving (1) Effective for products manufactured on or after January 1, 2011 Top-Loading, Compact (Capacity ≥ 1.6 ft^3) Front-Loading, Compact (Capacity ≥ 1.6 ft^3) Dishwashers: Effective for products manufactured on or after January 1, 2010 (2) Standard Note(s): Source(s): 355 6.5 1) Must have an unheated rinse water option. 2) Size is to be determined by ANSI/AHAM DW-1. Title 10, Code of Federal Regulations, Part 430 - Energy Conservation Program for Consumer Products, Subpart C - Energy and Water Conservation

370

Please cite this article in press as: R.E. Edwards, et al., Predicting future hourly residential electrical consumption: A machine learning case study, Energy Buildings (2012), doi:10.1016/j.enbuild.2012.03.010  

E-Print Network (OSTI)

-offs in the building design process, sizing components (e.g., HVAC) for a specific building, optimizing control systemsPlease cite this article in press as: R.E. Edwards, et al., Predicting future hourly residential.03.010 ARTICLE IN PRESSG Model ENB-3661; No.of Pages13 Energy and Buildings xxx (2012) xxx­xxx Contents lists

Parker, Lynne E.

371

BOLIG+ an energy neutral multifamily building BOLIG+ is a set of rules for residential buildings of any scale,  

E-Print Network (OSTI)

this means that thermal energy bought from the local district heating grid during winter time can in the district heating grid during summer due to excess heat at this time of the year owing to the primary purpose for the district heating grid, which is the combined heat and power production. Finally

Hansen, René Rydhof

372

Lighting in Residential and Commercial Buildings (1993 and 1995 Data) --  

U.S. Energy Information Administration (EIA) Indexed Site

Commercial Buildings Home > Special Topics and Data Reports > Types of Lights Commercial Buildings Home > Special Topics and Data Reports > Types of Lights Picture of a light bulb At Home and At Work: What Types of Lights Are We Using? Two national EIA surveys report that . . . Of residential households, 98 percent use incandescent, 42 percent use fluorescent. Of commercial buildings, 59 percent use incandescent, 92 percent use fluorescent. At a glance, we might conclude that substantial energy savings could occur in both the residential and commercial sectors if they replaced their incandescent lights with fluorescent lights, given that fluorescent lights consume approximately 75-85 percent less electricity than incandescent lights. In the residential sector, this is true. However, in the commercial sector, where approximately 92 percent of the buildings already use fluorescent lights, increasing energy savings will require upgrading existing lights and lighting systems. To maximize energy savings, analysis must also consider the hours the lights are used and the amount of floorspace lit by that lighting type. Figures 1 and 2 show the types of lights used by the percent of households and by the percent of floorspace lit for the residential and the commercial sectors, respectively.

373

Buildings Energy Data Book  

Buildings Energy Data Book (EERE)

Glossary Glossary Acronyms and Initialisms Technology Descriptions Residential Space Heating Residential Space Cooling Residential Water Heating Commercial Space Cooling Commercial Space Heating Commercial Refrigeration Lighting Building Descriptions Commercial Residential Acronyms and Initialisms A B C D E F G H I L M N O P Q R S U V AAMA - American Architectural Manufacturers Association ACEEE - American Council for an Energy Efficient Economy AEO - EIA's Annual Energy Outlook AFEAS - Alternative Fluorocarbons Environmental Acceptability Study AFUE - Annual Fuel Utilization Efficiency AHAM - Association of Home Appliance Manufacturers ARI - Air-Conditioning and Refrigeration Institute ASHRAE - American Society of Heating, Refrigerating and Air-Conditioning Engineers BTS - DOE's Office of Building Technology, State and Community Programs

374

Analysis of institutional mechanisms affecting residential and commercial buildings retrofit  

SciTech Connect

Barriers to energy conservation in the residential and commercial sectors influence (1) the willingness of building occupants to modify their energy usage habits, and (2) the willingness of building owners/occupants to upgrade the thermal characteristics of the structures within which they live or work and the appliances which they use. The barriers that influence the willingness of building owners/occupants to modify the thermal efficiency characteristics of building structures and heating/cooling systems are discussed. This focus is further narrowed to include only those barriers that impede modifications to existing buildings, i.e., energy conservation retrofit activity. Eight barriers selected for their suitability for Federal action in the residential and commercial sectors and examined are: fuel pricing policies that in the short term do not provide enough incentive to invest in energy conservation; high finance cost; inability to evaluate contractor performance; inability to evaluate retrofit products; lack of well-integrated or one-stop marketing systems (referred to as lack of delivery systems); lack of precise or customized information; lack of sociological/psychological incentives; and use of the first-cost decision criterion (expanded to include short-term payback criterion for the commercial sector). The impacts of these barriers on energy conservation are separately assessed for the residential and commercial sectors.

1980-09-01T23:59:59.000Z

375

Building Energy Code | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Building Energy Code Building Energy Code Building Energy Code < Back Eligibility Commercial Residential Schools Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Solar Heating Buying & Making Electricity Water Heating Program Info State California Program Type Building Energy Code Provider California Energy Commission '''''Note: The California Energy Commission adopted the 2013 Building Energy Efficiency Standards for new residential and commercial construction on May 31, 2012. The new standards are expected to take effect on January 1, 2014, and represent significant energy and water savings compared to the current standards. Among many notable provisions, the new standards will

376

Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Mixed-Humid Climates; January 2006 - December 2006  

SciTech Connect

The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Mixed-Humid Climate Region on a cost-neutral basis.

Building America Industrialized Housing Partnership (BAIHP); Building Industry Research Alliance (BIRA); Building Science Consortium (BSC); Consortium for Advanced Residential Buildings (CARB); Davis Energy Group (DEG); IBACOS; National Association of Home Builders Research Center (NAHBRC); National Renewable Energy Laboratory (NREL)

2006-12-01T23:59:59.000Z

377

Residential Ventilation & Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

5 5 Residential Ventilation & Energy Figure 1: Annual Average Ventilation Costs of the Current U.S. Single-Family Housing Stock ($/year/house). Infiltration and ventilation in dwellings is conventionally believed to account for one-third to one-half of space conditioning energy. Unfortunately, there is not a great deal of measurement data or analysis to substantiate this assumption. As energy conservation improvements to the thermal envelope continue, the fraction of energy consumed by the conditioning of air may increase. Air-tightening programs, while decreasing energy requirements, have the tendency to decrease ventilation and its associated energy penalty at the possible expense of adequate indoor air quality. Therefore, more energy may be spent on conditioning air.

378

Thermal Performance Analysis of a High-Mass Residential Building  

DOE Green Energy (OSTI)

Minimizing energy consumption in residential buildings using passive solar strategies almost always calls for the efficient use of massive building materials combined with solar gain control and adequate insulation. Using computerized simulation tools to understand the interactions among all the elements facilitates designing low-energy houses. Finally, the design team must feel confident that these tools are providing realistic results. The design team for the residential building described in this paper relied on computerized design tools to determine building envelope features that would maximize the energy performance [1]. Orientation, overhang dimensions, insulation amounts, window characteristics and other strategies were analyzed to optimize performance in the Pueblo, Colorado, climate. After construction, the actual performance of the house was monitored using both short-term and long-term monitoring approaches to verify the simulation results and document performance. Calibrated computer simulations showed that this house consumes 56% less energy than would a similar theoretical house constructed to meet the minimum residential energy code requirements. This paper discusses this high-mass house and compares the expected energy performance, based on the computer simulations, versus actual energy performance.

Smith, M.W.; Torcellini, P.A., Hayter, S.J.; Judkoff, R.

2001-01-30T23:59:59.000Z

379

PROGRESS IN ENERGY EFFICIENT BUILDINGS  

SciTech Connect

Recent accomplishments in buildings energy research by the diverse groups in the Energy Efficient Buildings Program at Lawrence Berkeley Laboratory (LBL) are summarized. We review technological progress in the areas of ventilation and indoor air quality, buildings energy performance, computer modeling, windows, and artificial lighting. The need for actual consumption data to track accurately the improving energy efficiency of buildings is being addressed by the Buildings Energy Data (BED) Group at LBL. We summarize results to date from our Building Energy Use Compilation and Analysis (BECA) studies, which include time trends in the energy consumption of new commercial and new residential buildings, the measured savings being attained by both commercial and residential retrofits, and the cost-effectiveness of buildings energy conservation measures. We also examine recent comparisons of predicted vs. actual energy usage/savings, and present the case for building energy use labels.

Wall, L.W.; Rosenfeld, A.H.

1982-12-01T23:59:59.000Z

380

Buildings and Energy in the 80's -- Overview  

U.S. Energy Information Administration (EIA)

Overview Total Residential and Commercial Primary Consumption by Type of Building Sources: Energy Information Administration, Office of Energy Markets and ...

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Residential Performance  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential Performance: guidelines, analysis and measurements of window and skylight performance Windows in residential buildings consume approximately 2% of all the energy used...

382

Building Energy Code | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Building Energy Code Building Energy Code Building Energy Code < Back Eligibility Commercial Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Program Info State Massachusetts Program Type Building Energy Code Provider State Board of Building Regulations and Standards ''Much of the information presented in this summary is drawn from the U.S. Department of Energy's (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more detailed information about building energy codes, visit the [http://www.energycodes.gov/states/ DOE] and [http://bcap-ocean.org/ BCAP] websites.'' The Massachusetts Board of Building Regulations and Standards has authority

383

Home > Households, Buildings & Industry > Energy Efficiency Page ...  

U.S. Energy Information Administration (EIA)

Home > Households, Buildings & Industry > Energy Efficiency Page > Energy Intensities >Table 7a Glossary U.S. Residential Housing Primary Page Last Revised: July 2009

384

Home > Households, Buildings & Industry > Energy Efficiency Page ...  

U.S. Energy Information Administration (EIA)

Home > Households, Buildings & Industry > Energy Efficiency Page > Energy Intensities > Table 5c Glossary U.S. Residential Housing Site Page Last Revised: July 2009

385

Duke Energy - Residential and Builder Energy Efficiency Rebate Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Duke Energy - Residential and Builder Energy Efficiency Rebate Duke Energy - Residential and Builder Energy Efficiency Rebate Program Duke Energy - Residential and Builder Energy Efficiency Rebate Program < Back Eligibility Construction Installer/Contractor Residential Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Heat Pumps Program Info State North Carolina Program Type Utility Rebate Program Rebate Amount Existing Home Air-source Heat Pump: $200 (home owner) Existing Home Geothermal Heat Pump: $200 (home owner) Existing Home Air Conditioner: $200 (home owner) New Building Heat Pump: $300/heat pump installed (contractor) New Building Air Conditioner: $300/unit installed (contractor) New Building Geothermal Heat Pump: $300/heat pump installed (contractor)

386

2008 BUILDING ENERGY EFFICIENCY STANDARDS  

E-Print Network (OSTI)

energy values energy savings greater during periods of likely peak demand, such as hot summer weekday and service hot water needs of residential buildings. Outdoor lighting, including parking lots and garages

387

Building Technologies Office: About Residential Building Programs  

NLE Websites -- All DOE Office Websites (Extended Search)

equivalent to taking 225 million cars off the road. Additionally, homeowners find energy efficient homes to be more comfortable because less air leakage and more insulation...

388

Advancing Residential Energy Retrofits  

Science Conference Proceedings (OSTI)

To advance the market penetration of residential retrofits, Oak Ridge National Laboratory (ORNL) and Southface Energy Institute (Southface) partnered to provide technical assistance on nine home energy retrofits in metropolitan Atlanta with simulated source energy savings of 30% to 50%. Retrofit measures included duct sealing, air infiltration reductions, attic sealing and roofline insulation, crawlspace sealing, HVAC and water heating equipment replacement, and lighting and appliance upgrades. This paper will present a summary of these measures and their associated impacts on important home performance metrics, such as air infiltration and duct leakage. The average estimated source energy savings for the homes is 33%, and the actual heating season average savings is 32%. Additionally, a case study describing expected and realized energy savings of completed retrofit measures of one of the homes is described in this paper.

Jackson, Roderick K [ORNL; Boudreaux, Philip R [ORNL; Kim, Eyu-Jin [Southface Energy Institute; Roberts, Sydney [Southface Energy Institute

2012-01-01T23:59:59.000Z

389

Measuring Airflows at Registers in Residential Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Measuring Airflows at Registers in Residential Buildings Measuring Airflows at Registers in Residential Buildings Speaker(s): Cyril Guillot Date: August 29, 2002 - 12:00pm Location: Bldg. 90 Measuring airflows at registers is a central issue in all HVAC (Heating Ventilation and Air Conditioning) studies. It is a basic measurement that is required in many Cooling/Heating systems tests and in air conditioner performance diagnostics. These measurements can, for instance, be used to determine if individual rooms receive adequate airflow in terms of comfort, to estimate total air handler flow and supply/return imbalances, and to assess duct air leakage. First, I calibrated the Minneapolis Duct Blasters, useful in the most accurate flow hood we have, then I worked on an existing project: measuring airflows with laundry baskets. Finally, I

390

Buildings Energy Data Book  

Buildings Energy Data Book (EERE)

Current and Past EditionsGlossaryPopular TablesQuery Tools Contact Us Current and Past EditionsGlossaryPopular TablesQuery Tools Contact Us Search What Is the Buildings Energy Data Book? The Data Book includes statistics on residential and commercial building energy consumption. Data tables contain statistics related to construction, building technologies, energy consumption, and building characteristics. The Building Technologies Program within the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy developed this resource to provide a current and accurate set of comprehensive buildings- and energy-related data. The Data Book is an evolving document and is updated periodically. Each data table is presented in HTML, Microsoft Excel, and PDF formats. Download Excel Viewer Download Adobe Reader

391

Development | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Printable Version Printable Version Development Commercial Residential Adoption Compliance Regulations Resource Center Development The U.S. Department of Energy (DOE) supports and participates in the model building energy code development processes administered by the ASHRAE and the International Code Council (ICC). DOE activities include developing and submitting code change proposals, conducting analysis of building energy efficiency and cost savings, and formulating underlying evaluation methodologies. Through participation in model energy code development for both commercial and residential buildings, DOE strives to make cost-effective, energy efficient upgrades to current model codes. DOE also establishes energy efficiency standards for federal buildings and manufactured housing. Further information on this process is defined under

392

2001 Residential Energy Consumption Survey  

U.S. Energy Information Administration (EIA)

Residential Energy Consumption Survey ... Office of Management and Budget, Washington, DC 20503. Form EIA-457A (2001) Form Approval: OMB No. 1905-0092 ...

393

RESIDENTIAL ENERGY CONSUMPTION SURVEY 1997  

U.S. Energy Information Administration (EIA)

RESIDENTIAL ENERGY CONSUMPTION SURVEY 1997. OVERVIEW: MOST POPULOUS STATES ... Homes with air-conditioning: 95%... with a central air-conditioning system: 83%

394

Buildings Except Low-Rise Residential Buildings  

E-Print Network (OSTI)

The parking structure lighting performance specification is intended to provide adequate illumination in parking structures (also known as parking garages) and save energy by reducing the installed power density of equipment below code as well as using controls to further reduce energy consumption. Revisions to this specification may occur in the future. 1.2 REFERENCES A. The publications listed below form a part of this specification to the extent referenced. Publications are referenced within the text by the basic designation only. B. American National Standards Institute (ANSI) 1. ANSI C62.41.1-2002 – IEEE Guide on the Surge Environment in Low-Voltage (1000V and less) AC Power Circuits

Chromaticity Solid; State Lighting Products

2010-01-01T23:59:59.000Z

395

Energy and building envelope  

SciTech Connect

This book presents the papers given at a conference on building thermal insulation, energy efficiency, and solar architecture. Topics considered at the conference include thermal comfort, heating loads, the air change rate in residential buildings, core-insulated external walls, passive solar options, cooling loads, daylighting, solar gain, the energy transmittance of glazings, heat storage units in phase change materials, heat transfer through windows, and rock bed heat storage for solar heating systems.

1986-01-01T23:59:59.000Z

396

Residential Energy Consumption Survey:  

Gasoline and Diesel Fuel Update (EIA)

E/EIA-0262/2 E/EIA-0262/2 Residential Energy Consumption Survey: 1978-1980 Consumption and Expenditures Part II: Regional Data May 1981 U.S. Department of Energy Energy Information Administration Assistant Administrator for Program Development Office of the Consumption Data System Residential and Commercial Data Systems Division -T8-aa * N uojssaooy 'SOS^-m (£03) ao£ 5925 'uofSfAfQ s^onpojj aa^ndmoo - aojAaag T BU T3gN am rcoj? aig^IT^^ '(adBx Q-naugBH) TOO/T8-JQ/30Q 30^703 OQ ' d jo :moaj ajqBfT^A^ 3J^ sjaodaa aAoqe aqa jo 's-TZTOO-eoo-Tgo 'ON ^ois odo 'g^zo-via/aoQ 'TBST Sujpjjng rXaAang uojidmnsuoo XSaaug sSu-ppjprig ON ^oo^s OdO '^/ZOZO-Via/aOQ *086T aunr '6L6I ?sn§ny og aunf ' jo suja^Bd uoj^dmnsuoo :XaAjng uo^^dmnsuoQ XSaaug OS '9$ '6-ieTOO- 00-T90 OdD 'S/ZOZO-Via/aOa C

397

Xcel Energy (Gas and Electric) - Residential Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Energy Efficiency Rebate Programs Xcel Energy (Gas and Electric) - Residential Energy Efficiency Rebate Programs Eligibility Residential Savings For Home Weatherization...

398

Holy Cross Energy - WE CARE Residential Energy Efficiency Rebate...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Energy Efficiency Rebate Program (Coloado) Holy Cross Energy - WE CARE Residential Energy Efficiency Rebate Program (Coloado) < Back Eligibility Residential Savings...

399

Consumers Energy (Electric) - Residential Energy Efficiency Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electric) - Residential Energy Efficiency Program Electric) - Residential Energy Efficiency Program Consumers Energy (Electric) - Residential Energy Efficiency Program < Back Eligibility Low-Income Residential Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Sealing Your Home Heating & Cooling Commercial Heating & Cooling Cooling Ventilation Manufacturing Heat Pumps Appliances & Electronics Commercial Lighting Lighting Maximum Rebate Home Performance Comprehensive Assessment and Installations: $3500 Insulation: $1,025 Windows: $250 Program Info State Michigan Program Type Utility Rebate Program Rebate Amount CFL Lighting: Retailer Instant Discount Programmable Thermostat: $10 Central A/C and Heat Pumps: $150 - $250 Central A/C Tune up: $50 Ground Source Heat Pump: $200-$300

400

Residential energy gateway system in smart grid.  

E-Print Network (OSTI)

??This project discusses about the residential energy gateway in the Smart Grid. A residential energy gateway is a critical component in the Home Energy Management… (more)

Thirumurthy, Vinod Govindswamy

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings" (DOE/EA-1918)  

NLE Websites -- All DOE Office Websites (Extended Search)

Environmental Assessment for Final Rule, 10 CFR 433, "Energy Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings" (DOE/EA-1918) June 28, 2013 1 Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings" (DOE/EA-1918) SUMMARY The U.S. Department of Energy (DOE) has prepared this environmental assessment (EA) for DOE's Final Rule, 10 CFR Part 433, "Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings". The Final Rule updates the baseline standard in 10 CFR 433 to the latest private sector standard based on cost-effectiveness and DOE's determination that energy efficiency has

402

Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings" (DOE/EA-1918)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Environmental Assessment for Final Rule, 10 CFR 433, "Energy Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings" (DOE/EA-1918) June 28, 2013 1 Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings" (DOE/EA-1918) SUMMARY The U.S. Department of Energy (DOE) has prepared this environmental assessment (EA) for DOE's Final Rule, 10 CFR Part 433, "Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings". The Final Rule updates the baseline standard in 10 CFR 433 to the latest private sector standard based on cost-effectiveness and DOE's determination that energy efficiency has

403

A Comparison of EnergyPlus to DOE-2.1E: Multiple Cases Ranging from a Sealed Box to a Residential Building  

E-Print Network (OSTI)

EnergyPlus (EPlus) is becoming widely used for building simulation. Previous studies have compared the performance of EPlus with other simulation programs including DOE-2 for a variety of cases. These studies identified the different results of programs for the same cases defined in ANSI/ASHRAE Standard 140. This study expanded upon the previous comparisons to include the simplest case scenario where the building was a sealed box without infiltration, internal load, system or plant. The simulations were then extended to include incremental changes on the building load by adding people, lights, equipment and infiltration. EPlus and DOE-2 were compared using multiple base case buildings in Austin from the simplest case to a fully inhabited residential building. With zero infiltration, EPlus calculated 16-17% lower total building load than calculated by DOE-2 as incremental loads were added. Infiltration decreased the difference between DOE-2 and EPlus by 27% and lead to an 11% lower total building load in EPlus when compared to DOE-2.

Andolsun, S.; Culp, C.

2008-12-01T23:59:59.000Z

404

Residential Energy Consumption Survey (RECS) - Energy Information ...  

U.S. Energy Information Administration (EIA)

Heating and cooling no longer majority of U.S. home energy use. Source: U.S. Energy Information Administration, Residential Energy Consumption Survey.

405

Consumers Energy (Electric)- Residential Energy Efficiency Program  

Energy.gov (U.S. Department of Energy (DOE))

Consumers Energy residential electric customers are eligible to apply for a variety of rebates on energy efficient equipment. Customers must install equipment in the Consumers Energy service area...

406

Consumers Energy (Gas)- Residential Energy Efficiency Program  

Energy.gov (U.S. Department of Energy (DOE))

Consumers Energy residential electric customers are eligible to apply for a variety of rebates on energy efficient equipment. Customers must install equipment in the Consumers Energy service area...

407

Building Energy Code | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Building Energy Code Building Energy Code Building Energy Code < Back Eligibility Commercial Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Program Info State Alabama Program Type Building Energy Code Provider Alabama Department of Economic and Community Affairs ''Much of the information presented in this summary is drawn from the U.S. Department of Energy's (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more detailed information about building energy codes, visit the [http://www.energycodes.gov/states/ DOE] and [http://bcap-ocean.org/ BCAP] web sites.'' Legislation passed in March 2010 authorized the Alabama Energy and

408

Atmos Energy - Residential Natural Gas and Weatherization Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Atmos Energy - Residential Natural Gas and Weatherization Efficiency Program Atmos Energy - Residential Natural Gas and Weatherization Efficiency Program Eligibility Residential...

409

Central Georgia EMC - Residential Energy Efficiency Rebate Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Energy Efficiency Rebate Program Central Georgia EMC - Residential Energy Efficiency Rebate Program Eligibility Residential Savings For Home Weatherization Commercial...

410

Impacts of the 2009 IECC for Residential Buildings at State Level - Arizona  

NLE Websites -- All DOE Office Websites (Extended Search)

Arizona Arizona September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN ARIZONA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN ARIZONA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Arizona Summary Arizona is a "home rule" state with no mandatory state-wide energy efficiency code. However, many counties and cities have adopted an energy efficiency code, most often the 2006 International Energy Conservation Code (IECC). The 2009 IECC contains several major improvements in energy efficiency over the 2006 IECC. The

411

Buildings Energy Data Book  

Buildings Energy Data Book (EERE)

7.1 National Legislation 7.1 National Legislation 7.2 Federal Tax Incentives 7.3 Efficiency Standards for Residential HVAC 7.4 Efficiency Standards for Commercial HVAC 7.5 Efficiency Standards for Residential Appliances 7.6 Efficiency Standards for Lighting 7.7 Water Use Standards 7.8 State Building Energy Codes 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download the Entire Book Skip down to the tables Chapter 7 outlines national climate change legislation, tax incentives, Federal regulations, and State programs that have influenced building energy consumption. Section 7.1 summarizes the past 40 years of national energy legislation beginning with the Clean Air Act of 1970. Section 7.2 describes the energy efficiency-related Federal tax incentives created in the last 5 years. Sections 7.3 through 7.7 describe the energy and water efficiency standards currently or soon to be in effect for residential and commercial HVAC equipment, appliances, lighting, and water-consuming products. Section 7.8 covers building energy codes. Following is a summary of the energy legislation discussed in this chapter:

412

Environmental assessment in support of proposed interim energy conservation voluntary performance standards for new non-federal residential buildings: Volume 7  

SciTech Connect

The objective of this environmental assessment (EA) is to identify the potential environmental impacts that could result from the proposed voluntary residential standard (VOLRES) on private sector construction of new residential buildings. In this report, the scope, objectives, and approach of this EA are presented.

NONE

1989-09-01T23:59:59.000Z

413

Building Technologies Office: National Residential Efficiency...  

NLE Websites -- All DOE Office Websites (Extended Search)

at all levels. The data from the efficiency measures database is used in the Building Energy Optimization (BEopt) software. Benefits The National Retrofit Measures Database...

414

Realized and Projected Impacts of U.S. Energy Efficiency Standards for Residential and Commercial Appliances  

E-Print Network (OSTI)

http://www.eere.energy.gov/buildings/appliance_standards/buildings/ appliance_standards/commercial/distributio n_Standards for Residential Appliances: 2004 Update, LBNL-

Meyers, Stephen P.

2008-01-01T23:59:59.000Z

415

Building Energy Code | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Building Energy Code Building Energy Code Building Energy Code < Back Eligibility Commercial Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Bioenergy Solar Lighting Windows, Doors, & Skylights Alternative Fuel Vehicles Hydrogen & Fuel Cells Heating Buying & Making Electricity Water Water Heating Wind Program Info State Connecticut Program Type Building Energy Code Provider Connecticut Office of Policy and Management ''Much of the information presented in this summary is drawn from the U.S. Department of Energy's (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more detailed information about building energy codes, visit the [http://www.energycodes.gov/states/

416

Middle Tennessee EMC - Residential Energy Efficiency Rebate Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Middle Tennessee EMC - Residential Energy Efficiency Rebate Program Middle Tennessee EMC - Residential Energy Efficiency Rebate Program Middle Tennessee EMC - Residential Energy Efficiency Rebate Program < Back Eligibility Residential Savings Category Home Weatherization Commercial Weatherization Sealing Your Home Heating & Cooling Commercial Heating & Cooling Cooling Construction Design & Remodeling Ventilation Manufacturing Heat Pumps Windows, Doors, & Skylights Program Info State Tennessee Program Type Utility Rebate Program Rebate Amount Windows (Replacement): $500 Storm Windows: $500 Duct Work: $500 HVAC (Replacement): $250 Building Insulation (Contractor Installed): $500 Building Insulation (Self Installed): $250 Water Heater Insulation: $50 Air Sealing: $500 HVAC Tune-Up: $150 Provider Middle Tennessee Electric Membership Corporation

417

Impacts of the 2009 IECC for Residential Buildings at State Level - West Virginia  

NLE Websites -- All DOE Office Websites (Extended Search)

West Virginia West Virginia September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN WEST VIRGINIA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN WEST VIRGINIA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in West Virginia Summary West Virginia is proceeding with adoption of the 2009 International Energy Conservation Code (IECC) through the State Fire Commission. No energy analysis was conducted here comparing the current West Virginia code to the 2009 IECC for this reason. However, the West Virginia energy code has been one of the weaker codes in

418

Impacts of the 2009 IECC for Residential Buildings at State Level - Kansas  

NLE Websites -- All DOE Office Websites (Extended Search)

Kansas Kansas September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN KANSAS BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN KANSAS Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in Kansas Summary Kansas currently does not have a mandatory energy efficiency code. The 2009 International Energy Conservation Code (IECC) would substantially improve energy efficiency in Kansas homes. A limited analysis of the impact of the 2009 IECC resulted in estimated savings of $355 to $582 a year for an average new house

419

Impacts of the 2009 IECC for Residential Buildings at State Level - South Dakota  

NLE Websites -- All DOE Office Websites (Extended Search)

South Dakota South Dakota September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN SOUTH DAKOTA BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN SOUTH DAKOTA Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in South Dakota Summary South Dakota currently does not have a mandatory energy efficiency code. The 2009 International Energy Conservation Code (IECC) would substantially improve energy efficiency in South Dakota homes. A limited analysis of the impact of the 2009 IECC resulted in estimated savings of $383 to $427 a year for an average

420

Detroit Public Lighting Department - Residential Energy Wise...  

Open Energy Info (EERE)

Multi-Family Residential, Residential Eligible Technologies Ceiling Fan, Lighting, LED Lighting Active Incentive Yes Implementing Sector Utility Energy Category Energy...

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Cedarburg Light & Water Utility - Residential Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cedarburg Light & Water Utility - Residential Energy Efficiency Rebate Program Cedarburg Light & Water Utility - Residential Energy Efficiency Rebate Program Eligibility Low-Income...

422

National Grid (Electric) - Residential Energy Efficiency Rebate...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Energy Efficiency Rebate Programs (Upstate New York) National Grid (Electric) - Residential Energy Efficiency Rebate Programs (Upstate New York) Eligibility Installer...

423

Performance Criteria for Residential Zero Energy Windows  

NLE Websites -- All DOE Office Websites (Extended Search)

Performance Criteria for Residential Zero Energy Windows Title Performance Criteria for Residential Zero Energy Windows Publication Type Conference Paper LBNL Report Number...

424

Cooling energy savings potential of light-colored roofs for residential and commercial buildings in 11 US metropolitan areas  

SciTech Connect

Light-colored roofs reflect more sunlight than dark roofs, thus they keep buildings cooler and reduce air-conditioning demand. Typical roofs in the United States are dark, which creates a potential for savings energy and money by changing to reflective roofs. In this report, the authors make quantitative estimates of the impact of roof color by simulating prototypical buildings with light- and dark-colored roofs and calculating savings by taking the differences in annual cooling and heating energy use, and peak electricity demand. Monetary savings are calculated using local utility rates. Savings are estimated for 11 U.S. Metropolitan Statistical Areas (MSAs) in a variety of climates.

Konopacki, S.; Akbari, H.; Pomerantz, M.; Gabersek, S.; Gartland, L.

1997-05-01T23:59:59.000Z

425

Impacts of the 2009 IECC for Residential Buildings at State Level - New Mexico  

NLE Websites -- All DOE Office Websites (Extended Search)

Mexico Mexico September 2009 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Building Energy Codes Program BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEW MEXICO BUILDING ENERGY CODES PROGRAM IMPACTS OF THE 2009 IECC FOR RESIDENTIAL BUILDINGS IN NEW MEXICO Analysis of 2009 International Energy Conservation Code Requirements for Residential Buildings in New Mexico Summary The 2009 International Energy Conservation Code (IECC) contains several major improvements in energy efficiency over the current state code, the 2006 IECC. The most notable changes are improved duct sealing and efficient lighting requirements. A limited analysis of these changes resulted in estimated savings of $216 to

426

Residential Energy Consumption Survey (RECS) - Energy ...  

U.S. Energy Information Administration (EIA)

State Energy Data System ... An Assessment of EIA's Building Consumption Data. ... Commercial Buildings - CBECS. Manufacturing - MECS.

427

City of Portland - Streamlined Building Permits for Residential...  

Open Energy Info (EERE)

Share this page on Facebook icon Twitter icon City of Portland - Streamlined Building Permits for Residential Solar Systems (Oregon) SolarWind Permitting Standards...

428

City of Portland - Streamlined Building Permits for Residential...  

Open Energy Info (EERE)

Share this page on Facebook icon Twitter icon City of Portland - Streamlined Building Permits for Residential Solar Systems (Oregon) This is the approved revision of...

429

City of Portland - Streamlined Building Permits for Residential...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Savings For Solar Buying & Making Electricity Heating & Cooling Water Heating Program Information Oregon Program Type Green Building Incentive The City of Portland's...

430

Is a building with multiple occupancies considered residential...  

NLE Websites -- All DOE Office Websites (Extended Search)

Model Policies Glossary Related Links ACE Learning Series Utility Savings Estimators Is a building with multiple occupancies considered residential or commercial? The IECC...

431

Building Energy Code | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Building Energy Code Building Energy Code Building Energy Code < Back Eligibility Commercial Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Program Info State New York Program Type Building Energy Code Provider NYS Department of State ''Much of the information presented in this summary is drawn from the U.S. Department of Energy's (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more detailed information about building energy codes, visit the [http://www.energycodes.gov/states/ DOE] and [http://bcap-ocean.org/ BCAP] websites.'' The Energy Conservation Construction Code of New York State (ECCCNYS) requires that all government, commercial and residential buildings,

432

Guam - Building Energy Code | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Guam - Building Energy Code Guam - Building Energy Code Guam - Building Energy Code < Back Eligibility Commercial Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Program Info Program Type Building Energy Code Provider Department of Public Works NOTE: In September 2012, The Guam Building Code Council adopted the draft [http://www.guamenergy.com/outreach-education/guam-tropical-energy-code/ Guam Tropical Energy Code]. It must be adopted by the legislature before it is official. This entry and information will be updated accordingly. Much of the information presented in this summary is drawn from the U.S. Department of Energy's (DOE) Building Energy Codes Program and the

433

OG&E - Residential Energy Efficiency Program | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OG&E - Residential Energy Efficiency Program OG&E - Residential Energy Efficiency Program Eligibility Low-Income Residential Residential Savings For Heating & Cooling Commercial...

434

Realized and Projected Impacts of U.S. Energy Efficiency Standards for Residential and Commercial Appliances  

E-Print Network (OSTI)

and Renewable Energy, Building Technologies, U.S. DepartmentProspective Impacts of U.S. Energy Efficiency Standards for2. US Residential and Commercial Primary Energy Consumption

Meyers, Stephen P.

2008-01-01T23:59:59.000Z

435

U.S. Residential Housing Weather-Adjusted Site Energy Intensity  

U.S. Energy Information Administration (EIA)

Glossary Home > Households, Buildings & Industry > Energy Efficiency Page > Energy Intensities >Table 6b U.S. Residential Housing Weather-Adjusted Site Energy Intensity

436

Buildings Energy Data Book  

Buildings Energy Data Book (EERE)

1.1 Buildings Sector Energy Consumption 1.1 Buildings Sector Energy Consumption 1.2 Building Sector Expenditures 1.3 Value of Construction and Research 1.4 Environmental Data 1.5 Generic Fuel Quad and Comparison 1.6 Embodied Energy of Building Assemblies 2The Residential Sector 3Commercial Sector 4Federal Sector 5Envelope and Equipment 6Energy Supply 7Laws, Energy Codes, and Standards 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download the Entire Book Skip down to the tables Chapter 1 provides an overview of energy use in the U.S. buildings sector, which includes single- and multi-family residences and commercial buildings. Commercial buildings include offices, stores, restaurants, warehouses, other buildings used for commercial purposes, and government buildings. Section 1.1 presents data on primary energy consumption, as well as energy consumption by end use. Section 1.2 focuses on energy and fuel expenditures in U.S. buildings. Section 1.3 provides estimates of construction spending, R&D, and construction industry employment. Section 1.4 covers emissions from energy use in buildings, construction waste, and other environmental impacts. Section 1.5 discusses key measures used throughout the Data Book, such as a quad, primary versus delivered energy, and carbon emissions. Section 1.6 provides estimates of embodied energy for various commercial building assemblies. The main points from this chapter are summarized below:

437

Jasper County REMC - Residential Residential Energy Efficiency Rebate  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Jasper County REMC - Residential Residential Energy Efficiency Jasper County REMC - Residential Residential Energy Efficiency Rebate Program Jasper County REMC - Residential Residential Energy Efficiency Rebate Program < Back Eligibility Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heat Pumps Appliances & Electronics Water Heating Program Info State Indiana Program Type Utility Rebate Program Rebate Amount Refrigerator Recycling: $35 Heat Pump Water Heater: $400 Air-Source Heat Pumps: $250 - $1,500/unit (Power Moves rebate), $200 (REMC Bill Credit) Dual Fuel Heat Pumps: $1,500/unit Geothermal Heat Pumps: $1,500/unit (Power Moves rebate), $500 (REMC Bill Credit) Provider Jasper County REMC Jasper County REMC, in conjunction with Wabash Valley Power Association's Power Moves programs, offers a range of rebates to its residential

438

Towards a comprehensive energy assessment of residential buildings: a multi-scale life cycle energy analysis framework.  

E-Print Network (OSTI)

??Results show that each of the embodied, operational and transport energy requirements represent a significant share of the total energy requirements and associated greenhouse gas… (more)

Stephan, André

2013-01-01T23:59:59.000Z

439

CenterPoint Energy (Gas) - Residential Efficiency Rebates (Oklahoma...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Efficiency Rebates (Oklahoma) CenterPoint Energy (Gas) - Residential Efficiency Rebates (Oklahoma) Eligibility Residential Savings For Heating & Cooling Commercial...

440

Ozone Reductions Using Residential Building Envelopes  

SciTech Connect

Ozone is an air pollutant with that can have significant health effects and a significant source of ozone in some regions of California is outdoor air. Because people spend the vast majority of their time indoors, reduction in indoor levels of ozone could lead to improved health for many California residents. Ozone is removed from indoor air by surface reactions and can also be filtered by building envelopes. The magnitude of the envelope impact depends on the specific building materials that the air flows over and the geometry of the air flow paths through the envelope that can be changes by mechanical ventilation operation. The 2008 Residential Building Standards in California include minimum requirements for mechanical ventilation by referencing ASHRAE Standard 62.2. This study examines the changes in indoor ozone depending on the mechanical ventilation system selected to meet these requirements. This study used detailed simulations of ventilation in a house to examine the impacts of different ventilation systems on indoor ozone concentrations. The simulation results showed that staying indoors reduces exposure to ozone by 80percent to 90percent, that exhaust ventilation systems lead to lower indoor ozone concentrations, that opening of windows should be avoided at times of high outdoor ozone, and that changing the time at which mechanical ventilation occurs has the ability to halve exposure to ozone. Future work should focus on the products of ozone reactions in the building envelope and the fate of these products with respect to indoor exposures.

Walker, Iain S.; Sherman, Max; Nazaroff, William W.

2009-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Enhancing Residential Building Operation through its Envelope  

E-Print Network (OSTI)

In this study heat loss is evaluated with the modeling software of Iranian Construction Engineering Organization, for both with and without insulation in the building. Of course the evaluation is in accordance with the laws of this organization, which support environmental and constructional matters. Also the amounts of energy consumption for these two states are compared and a substantial economy of energy consumption is presented. Eventually, results represent that 32% in heat load and 25% in cooling load of the building can be economized. And also most energy loss is related to the windows and the roof of the building.

Vazifeshenas, Y.; Sajjadi, H.

2010-01-01T23:59:59.000Z

442

Building Technologies Office: Bookmark Notice  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

RESIDENTIAL BUILDINGS COMMERCIAL BUILDINGS APPLIANCE & EQUIPMENT STANDARDS BUILDING ENERGY CODES EERE Building Technologies Office Commercial Buildings Printable Version...

443

Residential Census Maps - Energy Information Administration  

U.S. Energy Information Administration (EIA)

Home >>Energy Users > Residential Home Page > Census Maps . U. S. Census Regions and Divisions: Contact: James ...

444

NREL: Energy Systems Integration - Residential and Commercial...  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential and Commercial Integration Energy systems integration R&D at the small-scale, residential and commercial integration level encompasses diverse technologies such as...

445

Avista Utilities (Electric) - Residential Energy Efficiency Rebate...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

residential customers to save energy in eligible homes. Offers apply to residential homeowners in Idaho who heat homes primarily with Avista electricity Incentives vary depending...

446

Residential Energy Disclosure (Hawaii)  

Energy.gov (U.S. Department of Energy (DOE))

A residential property owner is required to disclose electricity costs for the most recent three-month period in which the property was occupied as a condition of selling it. No proof or copies of...

447

Analytical study of residential building with reflecting roofs  

SciTech Connect

This report presents an analysis of the effect of roof solar reflectance on the annual heating (cooling) loads, peak heating (cooling) loads, and roof temperatures of the residential buildings. The annual heating (cooling) loads, peak heating (cooling) loads, and exterior roof temperatures for a small compact ranch house are computed using the Thermal Analysis Research Program (TARP). The residential models, with minor modifications in the thermal envelope for different locations, are subjected to hourly weather data for one year compiled in the Weather Year for Energy Calculation (WYEC) for in the following locations: Birmingham, Alabama; Bismarck, North Dakota; Miami, Florida; Phoenix, Arizona; Portland, Maine; and, Washington, D.C. Building loads have been determined for a full factorial experimental design that varies the following parameters of the residential model: solar reflectance of the roof, ceiling thermal resistance, attic ventilation, and attic mass framing area. The computed results for annual heating (cooling) loads and peak heating (cooling) loads are illustrated graphically, both globally for all cities and locally for each geographic location. The effect of peak parameter is ranked (highest to lowest) for effect on annual heating and cooling loads, and peak heating and cooling loads. A parametric study plots the building loads as a function of roof solar reflectance for different levels of ceiling thermal resistances and for each geographic location.

Zarr, R.R.

1998-10-01T23:59:59.000Z

448

Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in the Hot-Dry and Mixed-Dry Climates  

Science Conference Proceedings (OSTI)

The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Hot-Dry/Mixed-Dry Climate Region on a cost neutral basis.

Building Industry Research Alliance (BIRA); Building Science Consortium (BSC); Consortium for Advanced Residential Buildings (CARB); Davis Energy Group (DEG); Florida Solar Energy Center (FSEC); IBACOS; National Association of Home Builders Research Center (NAHBRC); National Renewable Energy Laboratory (NREL)

2006-01-01T23:59:59.000Z

449

Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Mixed-Humid Climates; January 2006 - December 2006  

SciTech Connect

The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Mixed-Humid Climate Region on a cost-neutral basis.

Building America Industrialized Housing Partnership (BAIHP); Building Industry Research Alliance (BIRA); Building Science Consortium (BSC); Consortium for Advanced Residential Buildings (CARB); Davis Energy Group (DEG); IBACOS; National Association of Home Builders Research Center (NAHBRC); National Renewable Energy Laboratory (NREL)

2006-12-01T23:59:59.000Z

450

Building-Integrated Photovoltaics (BIPV) in the Residential Section: An Analysis of Installed Rooftop Prices (Presentation)  

DOE Green Energy (OSTI)

This powerpoint presentation to be presented at the World Renewable Energy Forum on May 17, 2012, in Denver, CO, discusses building-integrated photovoltaics (BIPV) in the residential section and includes an analysis of installed rooftop prices.

James, T.; Goodrich, A.; Woodhouse, M.; Margolis, R.; Ong, S.

2012-06-01T23:59:59.000Z

451

Advancing Building Energy Codes | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here You are here Home » Advancing Building Energy Codes Advancing Building Energy Codes 75% of U.S. buildings will be new or renovated by 2035. Building codes will ensure they use energy wisely. 75% of U.S. buildings will be new or renovated by 2035. Building codes will ensure they use energy wisely. The Building Technologies Office (BTO) supports greater adoption of residential and commercial building energy codes through collaborative efforts with local governments and industry groups, and by providing key tools and assistance for code development, adoption, and implementation. Through advancing building codes, we aim to improve building energy efficiency by 50%, and to help states achieve 90% compliance with their energy codes. Energy Codes Ensure Efficiency in Buildings

452

Black Hills Energy (Electric) - Residential Energy Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

unit Freezer: 30unit Dishwasher: 30unit RefrigeratorFreezer Recycling: 50unit CFLLED Bulbs: In-store rebates Black Hills Energy (BHE) offers rebates for residential...

453

Sustainable Energy Utility - Residential Energy Efficiency Program...  

Open Energy Info (EERE)

Utility - Residential Energy Efficiency Program (District of Columbia) No revision has been approved for this page. It is currently under review by our subject matter experts. Jump...

454

LBNL Building 90 Monitoring: Status Update and New Energy Information...  

NLE Websites -- All DOE Office Websites (Extended Search)

Buildings Cool Roofs and Heat Islands Demand Response Energy Efficiency Program and Market Trends High Technology and Industrial Systems Lighting Systems Residential Buildings...

455

Sustainable Energy Utility - Residential Energy Efficiency Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sustainable Energy Utility - Residential Energy Efficiency Program Sustainable Energy Utility - Residential Energy Efficiency Program (District of Columbia) Sustainable Energy Utility - Residential Energy Efficiency Program (District of Columbia) < Back Eligibility Residential Savings Category Appliances & Electronics Commercial Lighting Lighting Program Info Start Date 01/01/2013 Expiration Date 09/30/2013 State District of Columbia Program Type Utility Rebate Program Rebate Amount Refrigerators: $50 Clothes Washers: $50 CFL Lighting: varies by in-store discounts LED Lighting: $5-$10 The District of Columbia Sustainable Energy Utility currently offers the Residential Energy Efficiency Program. The program provides incentives to residents who complete qualifying home energy upgrades. Qualifying items include refrigerators, clothes washers, LED lighting and CFL lighting

456

About Building Energy Codes | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Compliance Compliance Regulations Resource Center About Building Energy Codes U.S. Energy Consumption by Sector (2011) Source: U.S. Energy Information Administration, Annual Energy Review According to the U.S. Energy Information Administration's Electric Power Annual, U.S. residential and commercial buildings account for approximately 41% of all energy consumption and 72% of electricity usage. Building energy codes increase energy efficiency in buildings, resulting in significant cost savings in both the private and public sectors of the U.S. economy. Efficient buildings reduce power demand and have less of an environmental impact. The Purpose of Building Energy Codes Energy codes and standards set minimum efficiency requirements for new and renovated buildings, assuring reductions in energy use and emissions over

457

Alabama | Building Energy Codes Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Adoption » Status of State Energy Code Adoption Adoption » Status of State Energy Code Adoption Site Map Printable Version Development Adoption Adoption Process State Technical Assistance Status of State Energy Code Adoption Compliance Regulations Resource Center Alabama Last updated on 2013-05-31 Current News The Alabama Energy and Residential Codes Board adopted the 2009 International Energy Conservation Code (IECC) for Commercial Buildings and the 2009 International Residential Code (IRC) for Residential Construction. The new codes will become effective on October 1, 2012. Commercial Residential Code Change Current Code 2009 IECC Amendments / Additional State Code Information N/A Approved Compliance Tools State Specific Research Impacts of ASHRAE 90.1-2007 for Commercial Buildings in Alabama (BECP Report, Sept. 2009)

458

BTS fact sheet: Ryan Homes and the Consortium for Advanced Residential Buildings  

SciTech Connect

Through Building America's unique collaboration process, Ryan Homes, the US Department of Energy, the National Renewable Energy Laboratory, and the Consortium for Advanced Residential Buildings worked together to identify ways to incorporate money-saving energy features throughout the Carborne house.

1999-05-07T23:59:59.000Z

459

City of Cleveland - Residential Property Tax Abatement for Green Buildings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

City of Cleveland - Residential Property Tax Abatement for Green City of Cleveland - Residential Property Tax Abatement for Green Buildings City of Cleveland - Residential Property Tax Abatement for Green Buildings < Back Eligibility Construction Low-Income Residential Multi-Family Residential Residential Savings Category Heating & Cooling Home Weatherization Construction Commercial Weatherization Commercial Heating & Cooling Design & Remodeling Solar Lighting Windows, Doors, & Skylights Heating Buying & Making Electricity Water Heating Wind Program Info Start Date 01/01/2010 State Ohio Program Type Property Tax Incentive Rebate Amount 100% for 10-15 years Provider City of Cleveland Department of Community Development The City of Cleveland, in cooperation with the Cuyahoga County Auditor's Office, provides a 100% tax abatement for residential properties built to

460

Indoor Environment and Energy Consumption of Urban Residential...  

NLE Websites -- All DOE Office Websites (Extended Search)

Indoor Environment and Energy Consumption of Urban Residential Buildings in China Speaker(s): Hiroshi Yoshino Date: September 18, 2009 - 12:00pm Location: 90-3122 In China, the...

Note: This page contains sample records for the topic "residential building energy" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Solar Energy Option Requirement for Residential Developments | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solar Energy Option Requirement for Residential Developments Solar Energy Option Requirement for Residential Developments Solar Energy Option Requirement for Residential Developments < Back Eligibility Construction Residential Savings Category Heating & Cooling Commercial Heating & Cooling Solar Heating Buying & Making Electricity Water Heating Program Info State New Jersey Program Type Building Energy Code Provider New Jersey Department of Community Affairs In March 2009 New Jersey enacted legislation ([http://www.njleg.state.nj.us/2008/Bills/PL09/33_.PDF A.B. 1558]) designed to support the integration of solar energy systems into new residential developments. The law requires that, whenever "technically feasible", developers of residential developments with 25 or more dwelling units (i.e., single-family residences) offer to install or provide for the

462

Steam System Balancing and Tuning for Multifamily Residential Buildings, Chicago, Illinois (Fact Sheet), Building America Case Study: Technology Solutions for New and Existing Homes, Building Technologies Office (BTO)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Steam System Balancing Steam System Balancing and Tuning for Multifamily Residential Buildings Chicago, Illinois PROJECT INFORMATION Project Name: Steam System Balancing and Tuning for Multifamily Residential Buildings Location: Chicago, IL Partners: Partnership for Advanced Residential Retrofit www.gastechnology.org Building Component: Steam heating distribution system and controls Application: Retrofit; Multifamily Year Tested: 2011-2012 Applicable Climate Zone(s): Cold humid continental PERFORMANCE DATA Cost of Energy Efficiency Measure (including labor): $9,000 on average Projected Energy Savings: 10.2% heating savings Chicago's older multifamily housing stock is primarily heated by centrally metered steam or hydronic systems. Often, significant temperature differentials

463

Residential/commercial market for energy technologies  

SciTech Connect

The residential/commercial market sector, particularly as it relates to energy technologies, is described. Buildings account for about 25% of the total energy consumed in the US. Market response to energy technologies is influenced by several considerations. Some considerations discussed are: industry characteristics; market sectors; energy-consumption characeristics; industry forecasts; and market influences. Market acceptance may be slow or nonexistent, the technology may have little impact on energy consumption, and redesign or modification may be necessary to overcome belatedly perceived market barriers. 7 figures, 20 tables.

Glesk, M.M.

1979-08-01T23:59:59.000Z

464

Clark Energy- Residential Energy Efficiency Rebate Programs  

Energy.gov (U.S. Department of Energy (DOE))

Clark Energy offers a free energy audit to provide residential customers with suggestions on ways to improve the energy efficiency of participating homes. Rebates are available for customers who...

465

Residential Energy Consumption Survey (RECS) - Energy Information...  

U.S. Energy Information Administration (EIA) Indexed Site

Heating and cooling no longer majority of U.S. home energy use Pie chart of energy consumption in homes by end uses Source: U.S. Energy Information Administration, Residential...

466

Building Energy Code | Open Energy Information  

Open Energy Info (EERE)

Code Code Jump to: navigation, search Building energy codes adopted by states (and some local governments) require commercial and/or residential construction to adhere to certain energy standards. While some governmental bodies have developed their own building energy codes, many use existing codes, such as the International Energy Conservation Code (IECC), developed and published by the International Code Council (ICC); or ASHRAE 90.1, developed by the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). A few local building energy codes require certain commercial facilities to meet green building standards. [1] Building Energy Code Incentives CSV (rows 1 - 85) Incentive Incentive Type Place Applicable Sector Eligible Technologies Active

467

Residential sector: the demand for energy services  

Science Conference Proceedings (OSTI)

The purpose of this report is to project the demand for residential services, and, thereby, the demand for energy into the future. The service demands which best represent a complete breakdown of residential energy consumption is identified and estimates of the amount of energy, by fuel type, used to satisfy each service demand for an initial base year (1978) are detailed. These estimates are reported for both gross (or input) energy use and net or useful energy use, in the residential sector. The various factors which affect the consumption level for each type of energy and each identified service demand are discussed. These factors include number of households, appliance penetration, choice of fuel type, technical conversion efficiency of energy using devices, and relative energy efficiency of the building shell (extent of insulation, resistance to air infiltration, etc.). These factors are discussed relative to both the present and expected future values, for the purpose of projections. The importance of the housing stock to service demand estimation and projection and trends in housing in Illinois are discussed. How the housing stock is projected based on population and household projections is explained. The housing projections to the year 2000 are detailed. The projections of energy consumption by service demand and fuel type are contrasted with the various energy demand projections in Illinois Energy Consumption Trends: 1960 to 2000 and explains how and why the two approaches differ. (MCW)

Not Available

1981-01-01T23:59:59.000Z

468

Energy Data Sourcebook for the U.S. Residential Sector  

E-Print Network (OSTI)

1989. Residential End-Use Energy Consumption: A Survey ofCathy R. Zoi. 1986. Unit Energy Consumption of ResidentialResidential Unit Energy Consumption Coefficients, Palo Alto,

Wenzel, T.P.

2010-01-01T23:59:59.000Z

469

Residential | OpenEI  

Open Energy Info (EERE)

Residential Residential Dataset Summary Description This dataset contains hourly load profile data for 16 commercial building types (based off the DOE commercial reference building models) and residential buildings (based off the Building America House Simulation Protocols). This dataset also includes the Residential Energy Consumption Survey (RECS) for statistical references of building types by location. Source Commercial and Residential Reference Building Models Date Released April 18th, 2013 (7 months ago) Date Updated July 02nd, 2013 (5 months ago) Keywords building building demand building load Commercial data demand Energy Consumption energy data hourly kWh load profiles Residential Data Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage

470

National Residential Efficiency Measures Database | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Residential Efficiency Measures Database National Residential Efficiency Measures Database This photo shows a man in a white hazardous mater