Powered by Deep Web Technologies
Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Impacts of Large Amounts of Wind Power on Design and Operation...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Impacts of Large Amounts of Wind Power on Design and Operation of Power Systems; Results of IEA Collaboration B. Parsons and E. Ela National Renewable Energy Laboratory, USA H....

2

Neural Networks and Expert Systems to solve the problems of large amounts of Experimental Data at JET  

E-Print Network [OSTI]

Neural Networks and Expert Systems to solve the problems of large amounts of Experimental Data at JET

3

Large Scale Computing and Storage Requirements for Nuclear Physics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Science at NERSC HPC Requirements Reviews Requirements for Science: Target 2014 Nuclear Physics (NP) Large Scale Computing and Storage Requirements for Nuclear Physics:...

4

Behavioral responses of cotton mice (Peromyscus gossypinus) to large amounts of coarse woody debris.  

SciTech Connect (OSTI)

Hinkleman, Travis M. 2004. MS Thesis. Clemson University, Clemson, South Carolina. 62 pp. Coarse woody debris (CWD) is any log, snag, or downed branch >10 cm in diameter. As a major structural feature of forest ecosystems, CWD serves as an important habitat component for a variety of organisms. Rodents frequently use CWD for travel routes and daytime refugia. Although rodents are known to use CWD extensively and selectively, the use and selection of CWD by rodents may vary according to the abundance of CWD. The purpose of this project was to determine the effect of CWD abundance on the habitat use patterns of a common terrestrial rodent, the cotton mouse (Peromyscus gossypinus). I tracked cotton mice with fluorescent pigments and radiotelemetry in 6 plots, situated in loblolly pine (Pinus taeda) stands, with manipulated levels of woody debris. Treatment plots had 6x the amount of woody debris as control plots. I determined log use and movement patterns from the paths produced by powder-tracking, and I identified daytime refugia by radio-tracking. Travel along logs was almost exclusively associated with the surface of logs (91%). The proportion of a movement path associated with logs was not the best predictor of path complexity; rather, the sex of the individual was the only significant indicator of relative displacement (i.e., males moved farther from the point of release than females) and vegetation cover was the only significant predictor of mean turning angle (i.e., increasing vegetation cover yielded more convoluted paths). Mice used logs to a greater extent on treatment plots (23.7%) than mice on control plots (4.8%). Mice on treatment plots used logs with less decay, less ground contact, and more bark than logs used by mice on control plots. Differences in log use patterns were largely a result of the attributes of available logs, but mice used logs selectively on treatment plots. Refuges were highly associated with woody debris, including refuges in rotting stumps (65%), root boles (13%), brush piles (8%), and logs (7%). Mice used different frequencies of refuge types between treatments; root bole and brush pile refuges were used more on treatment plots whereas stump and log refuges were used more on control plots. Refuge type, log volume, and tree basal area were significant predictors of refuge selection on control plots whereas refuge type and size were significant predictors of refuge selection on treatment plots. Refuges were significantly more dispersed on treatment plots. Mice used refuges more intensely and switched refuges less in the winter than the summer, regardless of woody debris abundance. The extensive and selective use of logs by cotton mice suggests that logs may be an important resource. However, logs are not a critical habitat component. Over half of the paths on control plots were not associated with logs, and logs were used infrequently as refuges. Nonetheless, refuges were highly associated with woody debris (e.g., stumps, root boles), which suggests that woody debris may be a critical habitat component.

Hinkleman, Travis M.

2004-08-01T23:59:59.000Z

5

Data Protection Guidance: Confidentiality 1. The University holds a large amount of personal data about its students and should respect  

E-Print Network [OSTI]

Data Protection Guidance: Confidentiality 1. The University holds a large amount of personal data and the Human Rights Act. It is University policy not to disclose any personal data to third parties (including or in exceptional circumstances. 2. Personal data, excluding sensitive data (see 3) can be transferred internally

Mumby, Peter J.

6

Humans produce large amounts of waste that must be processed or stored so that it does not contaminate the  

E-Print Network [OSTI]

in research, hospital materials) or high level (e.g., spent nuclear fuel, large quantities of heavy elements to identify problems such as subsidence, desiccation cracking, frost damage, and biointru- sion (i

Hodgson, Michael E.

7

Global Wind Power Conference September 18-21, 2006, Adelaide, Australia Design and Operation of Power Systems with Large Amounts of Wind Power, first  

E-Print Network [OSTI]

Global Wind Power Conference September 18-21, 2006, Adelaide, Australia Design and Operation of Power Systems with Large Amounts of Wind Power, first results of IEA collaboration Hannele Holttinen1.holttinen@vtt.fi Abstract: An international forum for exchange of knowledge of power system impacts of wind power has been

8

Large Scale Computing and Storage Requirements for Nuclear Physics Research  

SciTech Connect (OSTI)

IThe National Energy Research Scientific Computing Center (NERSC) is the primary computing center for the DOE Office of Science, serving approximately 4,000 users and hosting some 550 projects that involve nearly 700 codes for a wide variety of scientific disciplines. In addition to large-scale computing resources NERSC provides critical staff support and expertise to help scientists make the most efficient use of these resources to advance the scientific mission of the Office of Science. In May 2011, NERSC, DOE’s Office of Advanced Scientific Computing Research (ASCR) and DOE’s Office of Nuclear Physics (NP) held a workshop to characterize HPC requirements for NP research over the next three to five years. The effort is part of NERSC’s continuing involvement in anticipating future user needs and deploying necessary resources to meet these demands. The workshop revealed several key requirements, in addition to achieving its goal of characterizing NP computing. The key requirements include: 1. Larger allocations of computational resources at NERSC; 2. Visualization and analytics support; and 3. Support at NERSC for the unique needs of experimental nuclear physicists. This report expands upon these key points and adds others. The results are based upon representative samples, called “case studies,” of the needs of science teams within NP. The case studies were prepared by NP workshop participants and contain a summary of science goals, methods of solution, current and future computing requirements, and special software and support needs. Participants were also asked to describe their strategy for computing in the highly parallel, “multi-core” environment that is expected to dominate HPC architectures over the next few years. The report also includes a section with NERSC responses to the workshop findings. NERSC has many initiatives already underway that address key workshop findings and all of the action items are aligned with NERSC strategic plans.

Gerber, Richard A.; Wasserman, Harvey J.

2012-03-02T23:59:59.000Z

9

Large Scale Computing and Storage Requirements for High Energy Physics  

SciTech Connect (OSTI)

The National Energy Research Scientific Computing Center (NERSC) is the leading scientific computing facility for the Department of Energy's Office of Science, providing high-performance computing (HPC) resources to more than 3,000 researchers working on about 400 projects. NERSC provides large-scale computing resources and, crucially, the support and expertise needed for scientists to make effective use of them. In November 2009, NERSC, DOE's Office of Advanced Scientific Computing Research (ASCR), and DOE's Office of High Energy Physics (HEP) held a workshop to characterize the HPC resources needed at NERSC to support HEP research through the next three to five years. The effort is part of NERSC's legacy of anticipating users needs and deploying resources to meet those demands. The workshop revealed several key points, in addition to achieving its goal of collecting and characterizing computing requirements. The chief findings: (1) Science teams need access to a significant increase in computational resources to meet their research goals; (2) Research teams need to be able to read, write, transfer, store online, archive, analyze, and share huge volumes of data; (3) Science teams need guidance and support to implement their codes on future architectures; and (4) Projects need predictable, rapid turnaround of their computational jobs to meet mission-critical time constraints. This report expands upon these key points and includes others. It also presents a number of case studies as representative of the research conducted within HEP. Workshop participants were asked to codify their requirements in this case study format, summarizing their science goals, methods of solution, current and three-to-five year computing requirements, and software and support needs. Participants were also asked to describe their strategy for computing in the highly parallel, multi-core environment that is expected to dominate HPC architectures over the next few years. The report includes a section that describes efforts already underway or planned at NERSC that address requirements collected at the workshop. NERSC has many initiatives in progress that address key workshop findings and are aligned with NERSC's strategic plans.

Gerber, Richard A.; Wasserman, Harvey

2010-11-24T23:59:59.000Z

10

Large Scale Computing and Storage Requirements for High Energy Physics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 CERN 73-11Large areaLargefor High Energy

11

Geophysical and industrial requirements of large scale rollout of concentrating solar power (CSP) in South Africa.  

E-Print Network [OSTI]

??Includes abstract. This study investigates the requirements and implications if South Africa were to evolve its electricity supply structure to a large emphasis on Concentrated… (more)

Morse, Warren.

2009-01-01T23:59:59.000Z

12

Method for quantitative determination and separation of trace amounts of chemical elements in the presence of large quantities of other elements having the same atomic mass  

DOE Patents [OSTI]

Photoionization via autoionizing atomic levels combined with conventional mass spectroscopy provides a technique for quantitative analysis of trace quantities of chemical elements in the presence of much larger amounts of other elements with substantially the same atomic mass. Ytterbium samples smaller than 10 ng have been detected using an ArF* excimer laser which provides the atomic ions for a time-of-flight mass spectrometer. Elemental selectivity of greater than 5:1 with respect to lutetium impurity has been obtained. Autoionization via a single photon process permits greater photon utilization efficiency because of its greater absorption cross section than bound-free transitions, while maintaining sufficient spectroscopic structure to allow significant photoionization selectivity between different atomic species. Separation of atomic species from others of substantially the same atomic mass is also described.

Miller, C.M.; Nogar, N.S.

1982-09-02T23:59:59.000Z

13

Studying the energy efficiency of large-scale computer systems requires models of the relationship  

E-Print Network [OSTI]

Abstract Studying the energy efficiency of large-scale computer systems requires models-node clusters using embedded, laptop, desktop, and server processors. These results demonstrate the need usage and power consumption. Therefore, a substantial body of literature models system-level power

Rivoire, Suzanne

14

Water Consumption Footprint and Land Requirements of Large-Scale Alternative  

E-Print Network [OSTI]

the lifecycle green and blue water consumption footprints of producing: MD from conventional crude oil; Fischer on crude oil and the greenhouse gas intensity of transportation. However, the water and land resourceWater Consumption Footprint and Land Requirements of Large-Scale Alternative Diesel and Jet Fuel

15

Large Scale Computing and Storage Requirements for Basic Energy Sciences Research  

SciTech Connect (OSTI)

The National Energy Research Scientific Computing Center (NERSC) is the leading scientific computing facility supporting research within the Department of Energy's Office of Science. NERSC provides high-performance computing (HPC) resources to approximately 4,000 researchers working on about 400 projects. In addition to hosting large-scale computing facilities, NERSC provides the support and expertise scientists need to effectively and efficiently use HPC systems. In February 2010, NERSC, DOE's Office of Advanced Scientific Computing Research (ASCR) and DOE's Office of Basic Energy Sciences (BES) held a workshop to characterize HPC requirements for BES research through 2013. The workshop was part of NERSC's legacy of anticipating users future needs and deploying the necessary resources to meet these demands. Workshop participants reached a consensus on several key findings, in addition to achieving the workshop's goal of collecting and characterizing computing requirements. The key requirements for scientists conducting research in BES are: (1) Larger allocations of computational resources; (2) Continued support for standard application software packages; (3) Adequate job turnaround time and throughput; and (4) Guidance and support for using future computer architectures. This report expands upon these key points and presents others. Several 'case studies' are included as significant representative samples of the needs of science teams within BES. Research teams scientific goals, computational methods of solution, current and 2013 computing requirements, and special software and support needs are summarized in these case studies. Also included are researchers strategies for computing in the highly parallel, 'multi-core' environment that is expected to dominate HPC architectures over the next few years. NERSC has strategic plans and initiatives already underway that address key workshop findings. This report includes a brief summary of those relevant to issues raised by researchers at the workshop.

Gerber, Richard; Wasserman, Harvey

2011-03-31T23:59:59.000Z

16

Large Scale Computing and Storage Requirements for Biological and Environmental Research  

E-Print Network [OSTI]

climate and earth system models, based on theoreticalemerging class of Earth System Models that include detailedof integrated earth system model predictions requires

DOE Office of Science, Biological and Environmental Research Program Office BER,

2010-01-01T23:59:59.000Z

17

Large Scale Computing and Storage Requirements for Biological and Environmental Research  

SciTech Connect (OSTI)

In May 2009, NERSC, DOE's Office of Advanced Scientific Computing Research (ASCR), and DOE's Office of Biological and Environmental Research (BER) held a workshop to characterize HPC requirements for BER-funded research over the subsequent three to five years. The workshop revealed several key points, in addition to achieving its goal of collecting and characterizing computing requirements. Chief among them: scientific progress in BER-funded research is limited by current allocations of computational resources. Additionally, growth in mission-critical computing -- combined with new requirements for collaborative data manipulation and analysis -- will demand ever increasing computing, storage, network, visualization, reliability and service richness from NERSC. This report expands upon these key points and adds others. It also presents a number of"case studies" as significant representative samples of the needs of science teams within BER. Workshop participants were asked to codify their requirements in this"case study" format, summarizing their science goals, methods of solution, current and 3-5 year computing requirements, and special software and support needs. Participants were also asked to describe their strategy for computing in the highly parallel,"multi-core" environment that is expected to dominate HPC architectures over the next few years.

DOE Office of Science, Biological and Environmental Research Program Office (BER),

2009-09-30T23:59:59.000Z

18

Impacts of Array Configuration on Land Use Requirements for Large-Scale Photovoltaic Deployment in the United States  

SciTech Connect (OSTI)

Land use is often cited as an important issue for renewable energy technologies. In this paper we examine the relationship between land-use requirements for large-scale photovoltaic (PV) deployment in the U.S. and PV-array configuration. We estimate the per capita land requirements for solar PV and find that array configuration is a stronger driver of energy density than regional variations in solar insolation. When deployed horizontally, the PV land area needed to meet 100% of an average U.S. citizen's electricity demand is about 100 m{sup 2}. This requirement roughly doubles to about 200 m{sup 2} when using 1-axis tracking arrays. By comparing these total land-use requirements with other current per capita land uses, we find that land-use requirements of solar photovoltaics are modest, especially when considering the availability of zero impact 'land' on rooftops. Additional work is need to examine the tradeoffs between array spacing, self-shading losses, and land use, along with possible techniques to mitigate land-use impacts of large-scale PV deployment.

Denholm, P.; Margolis, R. M.

2008-01-01T23:59:59.000Z

19

Impacts of Array Configuration on Land-Use Requirements for Large-Scale Photovoltaic Deployment in the United States: Preprint  

SciTech Connect (OSTI)

Land use is often cited as an important issue for renewable energy technologies. In this paper we examine the relationship between land-use requirements for large-scale photovoltaic (PV) deployment in the U.S. and PV-array configuration. We estimate the per capita land requirements for solar PV and find that array configuration is a stronger driver of energy density than regional variations in solar insolation. When deployed horizontally, the PV land area needed to meet 100% of an average U.S. citizen's electricity demand is about 100 m2. This requirement roughly doubles to about 200 m2 when using 1-axis tracking arrays. By comparing these total land-use requirements with other current per capita land uses, we find that land-use requirements of solar photovoltaics are modest, especially when considering the availability of zero impact 'land' on rooftops. Additional work is need to examine the tradeoffs between array spacing, self-shading losses, and land use, along with possible techniques to mitigate land-use impacts of large-scale PV deployment.

Denholm, P.; Margolis, R. M.

2008-05-01T23:59:59.000Z

20

Large Scale Computing and Storage Requirements for Fusion Energy Sciences: Target 2017  

SciTech Connect (OSTI)

The National Energy Research Scientific Computing Center (NERSC) is the primary computing center for the DOE Office of Science, serving approximately 4,500 users working on some 650 projects that involve nearly 600 codes in a wide variety of scientific disciplines. In March 2013, NERSC, DOE?s Office of Advanced Scientific Computing Research (ASCR) and DOE?s Office of Fusion Energy Sciences (FES) held a review to characterize High Performance Computing (HPC) and storage requirements for FES research through 2017. This report is the result.

Gerber, Richard

2014-05-02T23:59:59.000Z

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Cooperative Extension Instruction Public Service Research Total Type Major Unit Department CNT Amount CNT Amount CNT Amount CNT Amount CNT Amount  

E-Print Network [OSTI]

Cooperative Extension Instruction Public Service Research Total Type Major Unit Department CNT Service Research Total Type Major Unit Department CNT Amount CNT Amount CNT Amount CNT Amount CNT Amount $16,000 2 $37,966 CENTER APPLIED GENETIC TECH- RI 1 $158,070 1 $158,070 CENTER FOR FOOD SAFETY

Arnold, Jonathan

22

Large  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 CERN 73-11Large area avalanche photodiode

23

Speeding up disease extinction with a limited amount of vaccine M. Khasin,1  

E-Print Network [OSTI]

studied in stochastic population dynamics. Spontaneous extinction of species is important alsoSpeeding up disease extinction with a limited amount of vaccine M. Khasin,1 M. I. Dykman,1 and B stable; disease extinction happens at random and requires a large fluctuation, which can come from

Dykman, Mark

24

PRO-DAIRY Alert and Action Statement Water use reporting required for New York State dairy farms that use large quantities of water.  

E-Print Network [OSTI]

1 PRO-DAIRY Alert and Action Statement Water use reporting required for New York State dairy farms to have plentiful water, the reporting of water usage provides NYSDEC information to manage the state that use large quantities of water. All dairy farms should be aware of this requirement, especially those

Walter, M.Todd

25

Amount of vitamin D required in commercial chick rations  

E-Print Network [OSTI]

the warh royorte4 ia this thesis was bo~ They ddnslu4e4 thai the ehio3 c rscycire4 for norsai ealoifieation a cdnicsss of ay~teiy F rat waits of vitccsin D frdcc do4 liver dil yer l00 geese ef the ratidnc They use4 two rdtiono in their worh? Ths first... syuthstis raticsL, Sstbhec Stosabsskc ssg Welsea wor3cing with rats in 1985 yxssenteg 4ata whish indiests4 ths enistenoe af a c0csntitative relation between the entirsehitie vitas4n an4 oaloiccxc in effesting the sestuilatioa of ths lattcxr. Sstbhs eug...

Couch, James Russell

1934-01-01T23:59:59.000Z

26

CHALLENGES OF INTEGRATING LARGE AMOUNTS OF WIND Jonathan D. Rose  

E-Print Network [OSTI]

. Many early wind turbines utilized a squirrel-cage or wound-rotor induction generator to produce and turbine improvements that make wind energy more grid-compatible to ensure further growth of this promising, doubly- fed induction and synchronous machines. It also considers the evolution of new grid codes

Hiskens, Ian A.

27

Necessity and Requirements of a Collaborative Effort to Develop a Large Wind Turbine Blade Test Facility in North America  

SciTech Connect (OSTI)

The wind power industry in North America has an immediate need for larger blade test facilities to ensure the survival of the industry. Blade testing is necessary to meet certification and investor requirements and is critical to achieving the reliability and blade life needed for the wind turbine industry to succeed. The U.S. Department of Energy's (DOE's) Wind Program is exploring options for collaborating with government, private, or academic entities in a partnership to build larger blade test facilities in North America capable of testing blades up to at least 70 m in length. The National Renewable Energy Laboratory (NREL) prepared this report for DOE to describe the immediate need to pursue larger blade test facilities in North America, categorize the numerous prospective partners for a North American collaboration, and document the requirements for a North American test facility.

Cotrell, J.; Musial, W.; Hughes, S.

2006-05-01T23:59:59.000Z

28

Economic Analysis and Optimization of Exterior Insulation Requirements for Ventilated Buildings at Power Generation Facilities with High Internal Heat Gain  

E-Print Network [OSTI]

Industrial buildings require a large amount of heating and ventilation equipment to maintain the indoor environment within acceptable levels for personnel protection and equipment protection. The required heating and ventilation equipment...

Hughes, Douglas E.

2010-12-17T23:59:59.000Z

29

Differences in radar derived rainfall amounts due to sampling intervals  

E-Print Network [OSTI]

DIFFERENCES IN RADAR DERIVED RAINFALL AMOUNTS DUE TO SAMPLING INTERVALS A Thesis by DAVID JAMES ZDENEK Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... December 1986 Major Subject: Meteorology DIFFERENCES IN RADAR DERIVED RAINFALL AMOUNTS DUE TO SAMPLING INTERVALS A Thesis by DAVID JAMES ZDENEK Approved as to style and content by: eorge L. Huebner (Chairman of Committee) CP~ CG~& Robert C...

Zdenek, David James

1986-01-01T23:59:59.000Z

30

Amplification of trace amounts of nucleic acids  

DOE Patents [OSTI]

Methods of reducing background during amplification of small amounts of nucleic acids employ careful analysis of sources of low level contamination. Ultraviolet light can be used to reduce nucleic acid contaminants in reagents and equipment. "Primer-dimer" background can be reduced by judicious design of primers. We have shown clean signal-to-noise with as little as starting material as one single human cell (.about.6 picogram), E. coli cell (.about.5 femtogram) or Prochlorococcus cell (.about.3 femtogram).

Church, George M. (Brookline, MA); Zhang, Kun (Brighton, MA)

2008-06-17T23:59:59.000Z

31

Estimate of the Potential Amount of Low-Level Waste from the Fukushima Prefecture - 12370  

SciTech Connect (OSTI)

The amount of waste generated by the cleanup of the Fukushima Prefecture (Fukushima-ken) following the releases from the Fukushima Daiichi nuclear power plant accident (March 2011) is dependent on many factors, including: - Contamination amounts; - Cleanup levels determined for the radioisotopes contaminating the area; - Future land use expectations and human exposure scenarios; - Groundwater contamination considerations; - Costs and availability of storage areas, and eventually disposal areas for the waste; and - Decontamination and volume reduction techniques and technologies used. For the purposes of estimating these waste volumes, Fukushima-ken is segregated into zones of similar contamination level and expected future use. Techniques for selecting the appropriate cleanup methods for each area are shown in a decision tree format. This approach is broadly applied to the 20 km evacuation zone and the total amounts and types of waste are estimated; waste resulting from cleanup efforts outside of the evacuation zone is not considered. Some of the limits of future use and potential zones where residents must be excluded within the prefecture are also described. The size and design of the proposed intermediate storage facility is also discussed and the current situation, cleanup, waste handling, and waste storage issues in Japan are described. The method for estimating waste amounts outlined above illustrates the large amount of waste that could potentially be generated by remediation of the 20 km evacuation zone (619 km{sup 2} total) if the currently proposed cleanup goals are uniformly applied. The Japanese environment ministry estimated in early October that the 1 mSv/year exposure goal would make the government responsible for decontaminating about 8,000 km{sup 2} within Fukushima-ken and roughly 4,900 km{sup 2} in areas outside the prefecture. The described waste volume estimation method also does not give any consideration to areas with localized hot spots. Land use and area dose rate estimates for the 20 km evacuation zone indicate there are large areas where doses to the public can be mitigated through methods other than removal and disposal of soil and other wastes. Several additional options for waste reduction can also be considered, including: - Recycling/reusing or disposing of as municipal waste material that can be unconditionally cleared; - Establishing additional precautionary (e.g., liners) and monitoring requirements for municipal landfills to dispose of some conditionally-cleared material; and - Using slightly-contaminated material in construction of reclamations, banks and roads. Waste estimates for cleanup will continue to evolve as decontamination plans are drafted and finalized. (authors)

Hill, Carolyn; Olson, Eric A.J.; Elmer, John [S.M. Stoller Corporation, Broomfield, Colorado 80021 (United States)

2012-07-01T23:59:59.000Z

32

Large Scale Computing Requirements for Basic Energy Sciences (An BES / ASCR / NERSC Workshop) Hilton Washington DC/Rockville Meeting Center, Rockville MD 3D Geophysical Imaging  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 CERN 73-11Large areaLarge

33

Abstract--Current grid standards seem to largely require low power (e.g. several kilowatts) single-phase photovoltaic (PV)  

E-Print Network [OSTI]

--Grid requirements; photovoltaic systems; low voltage ride through; ancillary services; grid support; reliability I-phase photovoltaic (PV) systems to operate at unity power factor with maximum power point tracking, and disconnect. INTRODUCTION Due to the declining photovoltaic (PV) module price and the strong feed-in tariff policies

Berning, Torsten

34

Purchasing & Contracting 742-3844 TTU CONTRACT ROUTING SHEET Contract # FOAP Contract amount $  

E-Print Network [OSTI]

Purchasing & Contracting 742-3844 TTU CONTRACT ROUTING SHEET Contract # FOAP Contract amount. Routing Sheet must be signed by department. Contract (brief description of scope) Board approval required? Yes No Meeting date Board Item # Note, BOR approval is required if contract is greater than $500

Westfall, Peter H.

35

The Amount of Vitamin A Potency Required by Hens for Egg Production.  

E-Print Network [OSTI]

sufficient n A to produce eggs of maximum potency. Sprouted oats, cabbage, ?, or simiisr light colored green feeds are not sufficiently rich in n A for tElk purpose. liver oil is high in vitamin A (7) and can be used for the purpose of ring it (2, 10...

Sherwood, R. M. (Ross Madison); Fraps, G. S. (George Stronach)

1934-01-01T23:59:59.000Z

36

Amount of Zeolite Required to Meet the Constraints Established by the  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power Systems EngineeringDepartment of4 Federal Register / Vol. 71, No. 15Partnership of

37

In high-tech industries, large amounts of reliable, high-quality  

E-Print Network [OSTI]

with the grid, three reciprocating engines, two absorption chillers, and a heat recovery steam generator (HRSG steam generator · One Caterpillar natural gas (20%) and diesel (80%) dual-fuel engine · Two standby (CHP) system. CHP systems can recover and utilize heat from fuel cells, engines, turbines

38

Transient Stability Assessment of Power System with Large Amount of Wind Power Penetration: the  

E-Print Network [OSTI]

the transient stability. In Denmark, the onshore and offshore wind farms are connected to distribution system and transmission system respectively. The control and protection methodologies of onshore and offshore wind farms definitely affect the transient stability of power system. In this paper, the onshore and offshore wind farms

Bak, Claus Leth

39

Grid planning with a large amount of small scale solar power.  

E-Print Network [OSTI]

?? With an increasing interest for renewable power, photovoltaics (PV) have becomemore and more common in the distribution network. If a customer wants to install… (more)

Hagström, Emil

2013-01-01T23:59:59.000Z

40

Obtaining accurate amounts of mercury from mercury compounds via electrolytic methods  

DOE Patents [OSTI]

A process for obtaining pre-determined, accurate rate amounts of mercury. In one embodiment, predetermined, precise amounts of Hg are separated from HgO and plated onto a cathode wire. The method for doing this involves dissolving a precise amount of HgO which corresponds to a pre-determined amount of Hg desired in an electrolyte solution comprised of glacial acetic acid and H.sub.2 O. The mercuric ions are then electrolytically reduced and plated onto a cathode producing the required pre-determined quantity of Hg. In another embodiment, pre-determined, precise amounts of Hg are obtained from Hg.sub.2 Cl.sub.2. The method for doing this involves dissolving a precise amount of Hg.sub.2 Cl.sub.2 in an electrolyte solution comprised of concentrated HCl and H.sub.2 O. The mercurous ions in solution are then electrolytically reduced and plated onto a cathode wire producing the required, pre-determined quantity of Hg.

Grossman, Mark W. (Belmont, MA); George, William A. (Rockport, MA)

1987-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Obtaining accurate amounts of mercury from mercury compounds via electrolytic methods  

DOE Patents [OSTI]

A process is described for obtaining pre-determined, accurate rate amounts of mercury. In one embodiment, predetermined, precise amounts of Hg are separated from HgO and plated onto a cathode wire. The method for doing this involves dissolving a precise amount of HgO which corresponds to a pre-determined amount of Hg desired in an electrolyte solution comprised of glacial acetic acid and H[sub 2]O. The mercuric ions are then electrolytically reduced and plated onto a cathode producing the required pre-determined quantity of Hg. In another embodiment, pre-determined, precise amounts of Hg are obtained from Hg[sub 2]Cl[sub 2]. The method for doing this involves dissolving a precise amount of Hg[sub 2]Cl[sub 2] in an electrolyte solution comprised of concentrated HCl and H[sub 2]O. The mercurous ions in solution are then electrolytically reduced and plated onto a cathode wire producing the required, pre-determined quantity of Hg. 1 fig.

Grossman, M.W.; George, W.A.

1987-07-07T23:59:59.000Z

42

Inherent discipline required in large system change  

E-Print Network [OSTI]

Recent electrical architectures of land vehicles have shown a marked increase in networking and integration of electronic controls into traditionally electro-mechanical devices, which results in complex functional interactions ...

Rivard, Robin L

2006-01-01T23:59:59.000Z

43

A Parallel Rolling Horizon Scheme for Large Scale Security Constrained Unit Commitment Problems  

E-Print Network [OSTI]

and how to dispatch the committed units to meet the electricity demands, ancillary services requirements energy penetration. Finally, when a large amount of wind power is present, we further propose an approach was partially supported by NSF grants CMMI-0900206 and CMMI-0928490. The work of Jiaqiao Hu was sup- ported

Feinberg, Eugene A.

44

Serum lipoprotein composition and amounts in eutrophic and hypotrophic  

E-Print Network [OSTI]

Serum lipoprotein composition and amounts in eutrophic and hypotrophic newborn at term. H Merzouk 1 with that of eu- trophic newborn at term. Twelve eutrophic newborn (birth weight 3 570 ± 93 g) and 18 hypotrophic cholesterol was analyzed by gas liquid chromatography. In the hypotrophic newborn, compared with the eutrophic

Paris-Sud XI, Université de

45

amount energy level: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

amount energy level First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 On Energy Expenditure per Unit of...

46

On Energy Expenditure per Unit of the Amount of Information  

E-Print Network [OSTI]

It is shown that for an equilibrium state of time-symmetric system of non-relativistic strings the energy per unit of information transfer (storage, processing) obeys the Bekenstein conjecture. The result is based on a theorem due to A.Kholevo relating the physical entropy and the amount of information. Interestingly, the energy in question is the difference between the ensemble average of the energy and the Helmholtz free energy.

A. Granik

2005-03-16T23:59:59.000Z

47

System for Dispensing a Precise Amount of Fluid  

DOE Patents [OSTI]

A dispensing system delivers a precise amount of fluid for biological or chemical processing and/or analysis. Dispensing means moves the fluid. The dispensing means is operated by a pneumatic force. Connection means delivers the fluid to the desired location. An actuator means provides the pneumatic force to the dispensing means. Valving means transmits the pneumatic force from the actuator means to the dispensing means.

Benett, William J. (Livermore, CA); Krulevitch, Peter A. (Pleasanton, CA); Visuri, Steven R. (Livermore, CA); Dzenitis, John M. (Danville, CA); Ness, Kevin D. (Mountain View, CA)

2008-08-12T23:59:59.000Z

48

ARM - Amount of Greenhouse Gases in the Global Atmosphere  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert SouthwestTechnologies |NovemberARMContactsARM Engineering andPlansAmount of Greenhouse

49

Naturally fractured reservoirs contain a significant amount of the world oil reserves. A number of these reservoirs contain several  

E-Print Network [OSTI]

Summary Naturally fractured reservoirs contain a significant amount of the world oil reserves. A number of these reservoirs contain several billion barrels of oil. Accurate and efficient reservoir this implementation has led to a unique and powerful reservoir simulator that can be used by small and large oil

Arbogast, Todd

50

A `warp drive' with more reasonable total energy requirements  

E-Print Network [OSTI]

I show how a minor modification of the Alcubierre geometry can dramatically improve the total energy requirements for a `warp bubble' that can be used to transport macroscopic objects. A spacetime is presented for which the total negative mass needed is of the order of a few solar masses, accompanied by a comparable amount of positive energy. This puts the warp drive in the mass scale of large traversable wormholes. The new geometry satisfies the quantum inequality concerning WEC violations and has the same advantages as the original Alcubierre spacetime.

Chris Van Den Broeck

1999-09-21T23:59:59.000Z

51

An efficient and user friendly investment optimization system for large scale oil field development  

E-Print Network [OSTI]

amount of capital required for offshore field and environmental restricted on-shore field development (swamp, farming land etc. ), reducing even a, small fraction of the total investment could mean large capital savings. Therefore, the minimization... for this research. In this research, four problems are addressed. First, a general model for both on-shore and off-shore facility location and well location problems is developed. Second, a preprocessing stage is added to the revised 0-1 Balas algorithm...

Ding, Zixuan

2012-06-07T23:59:59.000Z

52

Ecological resilience is the amount of change required to transform a system from the current state, maintained by one set  

E-Print Network [OSTI]

and Acacia 20% mesquite-huisache; 40% total Tallgrasses Sinton, TX Harris Ranch Grassland invaded by Prosopis

53

Analyzing the Deployment of Large Amounts of Offshore Wind to Design an Offshore Transmission Grid in the United States: Preprint  

SciTech Connect (OSTI)

This paper revisits the results from the U.S. Department of Energy's '20% Wind Energy By 2030' study, which envisioned that 54 GW of offshore wind would be installed by said year. The analysis is conducted using the Regional Energy Deployment System (ReEDS), a capacity expansion model developed by the National Renewable Energy Laboratory. The model is used to optimize the deployment of the 54 GW of wind capacity along the coasts and lakes of the United States. The graphical representation of the results through maps will be used to provide a qualitative description for planning and designing an offshore grid. ReEDS takes into account many factors in the process of siting offshore wind capacity, such as the quality of the resource, capital and O&M costs, interconnection costs, or variability metrics (wind capacity value, forecast error, expected curtailment). The effect of these metrics in the deployment of offshore wind will be analyzed through examples in the results.

Ibanez, E.; Mai, T.; Coles, L.

2012-09-01T23:59:59.000Z

54

Stochastic Methods for Planning and Operating Power Systems with Large Amounts of Wind and Solar Power: Preprint  

SciTech Connect (OSTI)

Wind and solar generators differ in their generation characteristics than conventional generators. The variable output and imperfect predictability of these generators face a stochastic approach to plan and operate the power system without fundamentally changing the operation and planning problems. This paper overviews stochastic modeling challenges in operations, generation planning, and transmission planning, with references to current industry and academic work. Different stochastic problem formulations, including approximations, are also discussed.

Milligan, M.; Donohoo, P.; O'Malley, M.

2012-09-01T23:59:59.000Z

55

Impacts of Large Amounts of Wind Power on Design and Operation of Power Systems; Results of IEA Collaboration  

SciTech Connect (OSTI)

This paper summarizes the results from 18 case studies, with discussion on differences in methodology as well as issues that have been identified to impact the cost of wind integration.

Ela, E.; Parsons, B.; Holttinen, H.; Meibom, P.; Orths, A.; O'Malley, M.; Ummels, B. C.; Tande, J. O.; Estanqueiro, A.; Gomez, E.; Smith, J. C.

2008-06-01T23:59:59.000Z

56

Effect of different amounts and types of calcium on colonic cell proliferation and fecal bile acids concentration  

E-Print Network [OSTI]

in Scandinavia including Finland, Sweden, and Denmark, Teppo and his colleagues showed that the incidence of colon cancer is the highest in Denmark and the lowest in Finland, where it is 50% less than that in Denmark. The gross national product per capita... shown that the population in Kuopio, Finland where people consume large amounts of milk (rich in calcium) has a fourfold lower incidence of colon cancer than the population in Copenhagen, Denmark (34). Similar results were reported in a 19-years...

C?hen Hsiao-Ch?ing

1991-01-01T23:59:59.000Z

57

BER Science Network Requirements  

SciTech Connect (OSTI)

The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the US Department of Energy Office of Science, the single largest supporter of basic research in the physical sciences in the United States. In support of the Office of Science programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 20 years. In April 2010 ESnet and the Office of Biological and Environmental Research, of the DOE Office of Science, organized a workshop to characterize the networking requirements of the science programs funded by BER. The requirements identified at the workshop are summarized and described in more detail in the case studies and the Findings section. A number of common themes emerged from the case studies and workshop discussions. One is that BER science, like many other disciplines, is becoming more and more distributed and collaborative in nature. Another common theme is that data set sizes are exploding. Climate Science in particular is on the verge of needing to manage exabytes of data, and Genomics is on the verge of a huge paradigm shift in the number of sites with sequencers and the amount of sequencer data being generated.

Dart, Eli; Tierney, Brian

2010-11-01T23:59:59.000Z

58

Large-Scale Data Challenges in Future Power Grids  

SciTech Connect (OSTI)

This paper describes technical challenges in supporting large-scale real-time data analysis for future power grid systems and discusses various design options to address these challenges. Even though the existing U.S. power grid has served the nation remarkably well over the last 120 years, big changes are in the horizon. The widespread deployment of renewable generation, smart grid controls, energy storage, plug-in hybrids, and new conducting materials will require fundamental changes in the operational concepts and principal components. The whole system becomes highly dynamic and needs constant adjustments based on real time data. Even though millions of sensors such as phase measurement units (PMUs) and smart meters are being widely deployed, a data layer that can support this amount of data in real time is needed. Unlike the data fabric in cloud services, the data layer for smart grids must address some unique challenges. This layer must be scalable to support millions of sensors and a large number of diverse applications and still provide real time guarantees. Moreover, the system needs to be highly reliable and highly secure because the power grid is a critical piece of infrastructure. No existing systems can satisfy all the requirements at the same time. We examine various design options. In particular, we explore the special characteristics of power grid data to meet both scalability and quality of service requirements. Our initial prototype can improve performance by orders of magnitude over existing general-purpose systems. The prototype was demonstrated with several use cases from PNNL’s FPGI and was shown to be able to integrate huge amount of data from a large number of sensors and a diverse set of applications.

Yin, Jian; Sharma, Poorva; Gorton, Ian; Akyol, Bora A.

2013-03-25T23:59:59.000Z

59

A Large Underground Liquid Argon Detector without a Cryostat? Kirk T McDonald (kirkmcd@princeton.edu)  

E-Print Network [OSTI]

/when they are to be used by people. The heat capacity of granite is about 800 J/kg-K, and its specific gravity is about 2.7, so its heat capacity per volume is about 2.16 MJ/m3 -K. The amount of energy required to coolA Large Underground Liquid Argon Detector without a Cryostat? Kirk T McDonald (kirkmcd

McDonald, Kirk

60

Managing System of Systems Requirements with a Requirements Screening Group  

SciTech Connect (OSTI)

Figuring out an effective and efficient way to manage not only your Requirement’s Baseline, but also the development of all your individual requirements during a Program’s/Project’s Conceptual and Development Life Cycle Stages can be both daunting and difficult. This is especially so when you are dealing with a complex and large System of Systems (SoS) Program with potentially thousands and thousands of Top Level Requirements as well as an equal number of lower level System, Subsystem and Configuration Item requirements that need to be managed. This task is made even more overwhelming when you have to add in integration with multiple requirements’ development teams (e.g., Integrated Product Development Teams (IPTs)) and/or numerous System/Subsystem Design Teams. One solution for tackling this difficult activity on a recent large System of Systems Program was to develop and make use of a Requirements Screening Group (RSG). This group is essentially a Team made up of co-chairs from the various Stakeholders with an interest in the Program of record that are enabled and accountable for Requirements Development on the Program/Project. The RSG co-chairs, often with the help of individual support team, work together as a Program Board to monitor, make decisions on, and provide guidance on all Requirements Development activities during the Conceptual and Development Life Cycle Stages of a Program/Project. In addition, the RSG can establish and maintain the Requirements Baseline, monitor and enforce requirements traceability across the entire Program, and work with other elements of the Program/Project to ensure integration and coordination.

Ronald R. Barden

2012-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Large Scale Computing and Storage Requirements for High Energy Physics  

E-Print Network [OSTI]

number modeling of type ia supernovae. I. Hydrodynamics.number modeling of type ia supernovae. II. Energy evolution.Mach number modeling of type ia supernovae. III. Reactions.

Gerber, Richard A.

2011-01-01T23:59:59.000Z

62

Large Scale Computing and Storage Requirements for Nuclear Physics Research  

E-Print Network [OSTI]

in the process of thermonuclear incineration of theircore-collapse and thermonuclear events to test predictionsprocesses. In contrast to thermonuclear supernova modeling,

Gerber, Richard A.

2012-01-01T23:59:59.000Z

63

Large Scale Computing and Storage Requirements for High Energy Physics  

E-Print Network [OSTI]

second resulting from a thermonuclear explosion of materialresult from the thermonuclear burning of a carbon-oxygensensitive to how the thermonuclear runaway is ignited (

Gerber, Richard A.

2011-01-01T23:59:59.000Z

64

Large Scale Computing and Storage Requirements for Basic Energy...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Biological and Environmental Science (BER) Fusion Energy Sciences (FES) High Energy Physics (HEP) Nuclear Physics (NP) Overview Published Reports Case Study FAQs Home Science at...

65

Large Scale Computing and Storage Requirements for Nuclear Physics Research  

E-Print Network [OSTI]

proceedings of High Performance Computing – 2011 (HPC-2011)In recent years, high performance computing has becomeNERSC is the primary high-performance computing facility for

Gerber, Richard A.

2012-01-01T23:59:59.000Z

66

Large Scale Computing and Storage Requirements for High Energy Physics  

E-Print Network [OSTI]

Type Ia supernovae, gamma-ray bursts, X-ray bursts and corerelativistic jet, making a gamma-ray burst, the luminositythose that lead to gamma-ray bursts. The current frontier is

Gerber, Richard A.

2011-01-01T23:59:59.000Z

67

Large Scale Computing and Storage Requirements for Nuclear Physics Research  

E-Print Network [OSTI]

neutrino matrix. Neutrinoless double beta decay experiments,process called neutrinoless double beta decay in nuclei,

Gerber, Richard A.

2012-01-01T23:59:59.000Z

68

Large Scale Computing and Storage Requirements for Nuclear Physics Research  

E-Print Network [OSTI]

Low-Energy Nuclear Physics National Joseph Carlson / HPC Initiative: Building a Universal Joseph Carlson Jonathan Engel Nuclear Energy Density Functional Structure and Reactions

Gerber, Richard A.

2012-01-01T23:59:59.000Z

69

Large Scale Production Computing and Storage Requirements for...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

research. Final Report PDF version Date and Location April 29-30, 2014 Hyatt Regency Bethesda One Bethesda Metro Center (7400 Wisconsin Ave) Bethesda, Maryland, USA 20814...

70

Large Scale Computing and Storage Requirements for Advanced Scientific  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformationPostdocs space CombinedValues shown

71

Large Scale Computing and Storage Requirements for Basic Energy Sciences  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformationPostdocs space CombinedValues shownBiological and

72

Large Scale Computing and Storage Requirements for Biological and  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformationPostdocs space CombinedValues shownBiological

73

Large Scale Computing and Storage Requirements for Biological and  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformationPostdocs space CombinedValues shownBiologicalEnvironmental

74

Large Scale Computing and Storage Requirements for Fusion Energy Sciences  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformationPostdocs space CombinedValues

75

Large Scale Computing and Storage Requirements for Nuclear Physics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformationPostdocs space CombinedValues Participants Organizing

76

Large Scale Production Computing and Storage Requirements for Nuclear  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformationPostdocs space CombinedValues Participants

77

Graduation Requirements and Procedures Graduation Requirements and  

E-Print Network [OSTI]

/Degree Audit (DARS) or contact the department offering the major. Graduation Average Requirement The minimum

78

Non-traditional growth in large, established firms  

E-Print Network [OSTI]

Firms must continuously strive to grow through the creation of new sources of competitive advantage. The challenges to growth are more severe for large, established firms that derive a predominant amount of their present ...

Sunderrajan, Suresh, 1970-

2004-01-01T23:59:59.000Z

79

Large Aerosols Play Unexpected Role in Ganges Valley | U.S. DOE...  

Office of Science (SC) Website

The data have revealed that large aerosols in this region absorb a greater amount of light than expected. The Science Aerosol particles in the atmosphere may absorb solar...

80

E-Print Network 3.0 - amount gaseous fission Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

) reports that the amount of non-gaseous nuclides retained on the filters of the Windscale pile... . Petersen Abstract. The fission-product release to the atmosphere from a...

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

one was tested, all reaction mixtures were supple-mented with an appropriate amount of ethanol  

E-Print Network [OSTI]

one was tested, all reaction mixtures were supple- mented with an appropriate amount of ethanol (5% v/v), because the menadione was dissolved in ethanol as a stock solution. The reaction was ini

Moorcroft, Paul R.

82

Combined Total Amount of Oil and Gas Recovered Daily from the...  

Broader source: Energy.gov (indexed) [DOE]

ODS format Combined Total Amount of Oil and Gas Recovered Daily from the Top Hat and Choke Line oil recovery systems - ODS format Updated through 12:00 AM on July 16, 2010....

83

Combined Total Amount of Oil and Gas Recovered Daily from the...  

Broader source: Energy.gov (indexed) [DOE]

XLS Combined Total Amount of Oil and Gas Recovered Daily from the Top Hat and Choke Line oil recovery systems - XLS Updated through 12:00 AM on July 16, 2010. 52Item84Recovery...

84

The requirements discovery process  

SciTech Connect (OSTI)

Cost and schedule overruns are often caused by poor requirements that are produced by people who do not understand the requirement process. This paper provides a high-level overview of the requirements discovery process.

Bahill, A.T. [Univ. of Arizona, Tucson, AZ (United States). Systems and Industrial Engineering; Dean, F.F. [Sandia National Lab., Albuquerque, NM (United States)

1997-02-01T23:59:59.000Z

85

Development of Graphical Indices for Displaying Large Scale Building Energy Data Sets  

E-Print Network [OSTI]

analyst view large amounts of hourly building energy consumption data in order to quickly and efficiently analyze the data, check for errors, or establish time and temperature related trends over a large period of time. The objective is to demonstrate...

Abbas, M.; Haberl, J. S.

1994-01-01T23:59:59.000Z

86

ASCR Science Network Requirements  

SciTech Connect (OSTI)

The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the US Department of Energy Office of Science, the single largest supporter of basic research in the physical sciences in the United States. In support of the Office of Science programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 20 years. In April 2009 ESnet and the Office of Advanced Scientific Computing Research (ASCR), of the DOE Office of Science, organized a workshop to characterize the networking requirements of the programs funded by ASCR. The ASCR facilities anticipate significant increases in wide area bandwidth utilization, driven largely by the increased capabilities of computational resources and the wide scope of collaboration that is a hallmark of modern science. Many scientists move data sets between facilities for analysis, and in some cases (for example the Earth System Grid and the Open Science Grid), data distribution is an essential component of the use of ASCR facilities by scientists. Due to the projected growth in wide area data transfer needs, the ASCR supercomputer centers all expect to deploy and use 100 Gigabit per second networking technology for wide area connectivity as soon as that deployment is financially feasible. In addition to the network connectivity that ESnet provides, the ESnet Collaboration Services (ECS) are critical to several science communities. ESnet identity and trust services, such as the DOEGrids certificate authority, are widely used both by the supercomputer centers and by collaborations such as Open Science Grid (OSG) and the Earth System Grid (ESG). Ease of use is a key determinant of the scientific utility of network-based services. Therefore, a key enabling aspect for scientists beneficial use of high performance networks is a consistent, widely deployed, well-maintained toolset that is optimized for wide area, high-speed data transfer (e.g. GridFTP) that allows scientists to easily utilize the services and capabilities that the network provides. Network test and measurement is an important part of ensuring that these tools and network services are functioning correctly. One example of a tool in this area is the recently developed perfSONAR, which has already shown its usefulness in fault diagnosis during the recent deployment of high-performance data movers at NERSC and ORNL. On the other hand, it is clear that there is significant work to be done in the area of authentication and access control - there are currently compatibility problems and differing requirements between the authentication systems in use at different facilities, and the policies and mechanisms in use at different facilities are sometimes in conflict. Finally, long-term software maintenance was of concern for many attendees. Scientists rely heavily on a large deployed base of software that does not have secure programmatic funding. Software packages for which this is true include data transfer tools such as GridFTP as well as identity management and other software infrastructure that forms a critical part of the Open Science Grid and the Earth System Grid.

Dart, Eli; Tierney, Brian

2009-08-24T23:59:59.000Z

87

A TEST OF THE PRECIPITATION AMOUNT AND INTENSITY MEASUREMENTS WITH THE OTT PLUVIO  

E-Print Network [OSTI]

A TEST OF THE PRECIPITATION AMOUNT AND INTENSITY MEASUREMENTS WITH THE OTT PLUVIO Wiel M.F. Wauben precipitation sensor of Ott has been tested at KNMI in order to find out whether it is a suitable candidate for replacing the current operational KNMI precipitation gauge. Tests performed at the calibration facilities

Wauben, Wiel

88

Wormholes, Gamma Ray Bursts and the Amount of Negative Mass in the Universe  

E-Print Network [OSTI]

In this essay, we assume that negative mass objects can exist in the extragalactic space and analyze the consequences of their microlensing on light from distant Active Galactic Nuclei. We find that such events have very similar features to some observed Gamma Ray Bursts and use recent satellite data to set an upper bound to the amount of negative mass in the universe.

Diego F. Torres; Gustavo E. Romero; Luis A. Anchordoqui

1998-05-19T23:59:59.000Z

89

Testing Miocene Remagnetization of Bey Dalari: Timing and Amount of Neogene Rotations in SW Turkey  

E-Print Network [OSTI]

Testing Miocene Remagnetization of Bey Dalari: Timing and Amount of Neogene Rotations in SW Turkey Engineering, TR-06531 Ankara, Turkey Received 07 December 2009; revised typescript receipt 07 December 2009 of the Aegean orocline, located in SW Turkey. The current model for this orocline involves a 25

Utrecht, Universiteit

90

Understanding global secondary organic aerosol amount and size-resolved condensational behavior  

E-Print Network [OSTI]

Understanding global secondary organic aerosol amount and size-resolved condensational behavior and Adams, 2009b) ·Condensation, coagulation, nucleation ·40 size bins (1 nm ­ 10 µm) ·Nucleation rates the aerosol mass distribution. However, recent closure studies with field measurements show that a significant

91

Business Systems Analysis With ever increasing amounts of data, organizations are identifying  

E-Print Network [OSTI]

Business Systems Analysis With ever increasing amounts of data, organizations are identifying the importance of Business Intelligence and Analytics (BIA) for decision-making. Gartner recognized BIA as one of 140,000-190,000 analytics workers. Both the Business Systems Analysis (BSAN) major, minor and emphasis

Miles, Will

92

CHANGES OF SYSTEM OPERATION COSTS DUE TO LARGE-SCALE WIND INTEGRATION  

E-Print Network [OSTI]

energy markets large amounts of fluctuating renewable energy sources for electricity production (RES and the electricity market. In order to cope with the fluctuations in the wind power production, other units in electricity markets Summary (max. 100 words) Within the European Union large amounts of intermittent wind

93

Allocating Reserve Requirements (Presentation)  

SciTech Connect (OSTI)

This presentation provides an overview of present and possible future ways to allocate and assign benefits for reserve requirements.

Milligan, M.; Kirby, B.; King, J.

2011-07-01T23:59:59.000Z

94

BER Science Network Requirements  

E-Print Network [OSTI]

Management and analysis of geospatial data involvingmanipulation, analysis, and display of geospatial data,Analysis and interpretation require mapping geospatial

Dart, Eli

2011-01-01T23:59:59.000Z

95

Regulators, Requirements, Statutes  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Statutes Regulators, Requirements, Statutes The Laboratory must comply with environmental laws and regulations that apply to Laboratory operations. Contact Environmental...

96

FES Science Network Requirements  

E-Print Network [OSTI]

FES Science Network Requirements Report of the Fusion Energy Sciences Network Requirements Workshop Conducted March 13 and 14, 2008 #12;FES Science Network Requirements Workshop Fusion Energy Sciences Program Office, DOE Office of Science Energy Sciences Network Gaithersburg, MD ­ March 13 and 14, 2008 ESnet

Geddes, Cameron Guy Robinson

97

daylight 12/17/2007 1 Tracking the change in the amount of daylight  

E-Print Network [OSTI]

daylight 12/17/2007 1 Tracking the change in the amount of daylight Ever notice that at some times successive days? (c) (Calculus) The daylight graph has been drawn with sine-curve. Find its equation. (d) Use get the following diagram. #12;daylight 12/17/2007 2 0 2 4 6 8 10 12 14 16 18 20 0 20 40 60 80 100 120

Taylor, Peter

98

Transportation System Requirements Document  

SciTech Connect (OSTI)

This Transportation System Requirements Document (Trans-SRD) describes the functions to be performed by and the technical requirements for the Transportation System to transport spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from Purchaser and Producer sites to a Civilian Radioactive Waste Management System (CRWMS) site, and between CRWMS sites. The purpose of this document is to define the system-level requirements for Transportation consistent with the CRWMS Requirement Document (CRD). These requirements include design and operations requirements to the extent they impact on the development of the physical segments of Transportation. The document also presents an overall description of Transportation, its functions, its segments, and the requirements allocated to the segments and the system-level interfaces with Transportation. The interface identification and description are published in the CRWMS Interface Specification.

Not Available

1993-09-01T23:59:59.000Z

99

Nutritional requirements of sesame  

E-Print Network [OSTI]

L)&RARYi ~st t~6~ 0F TEXACO NUTRITIONAL REQUIREMENTS OF SESAME A Thesis By JOE C. ELLER Submitted to the Graduate School of the Agricultural and Mechanical College of Texas in. partial fulfillment of the requirements for the degree of M... AS TER 0 F SCIENC E January 1958 Major Subject: Agronomy NUTRITIONAL REQUIREMENTS OF SESAME A Thesis JOE C. ELLER Approved. as to style and content by. ' Chairman of Committee Head qg Department January 1958 ACKNOWLEDGEMENT The author wishes...

Eller, Joe C

1958-01-01T23:59:59.000Z

100

Required Annual Notices  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Required Annual Notices The Women's Health and Cancer Rights Act of 1998 (WHCRA) The medical programs sponsored by LANS will not restrict benefits if you or your dependent...

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Unreviewed Safety Question Requirements  

Broader source: Energy.gov (indexed) [DOE]

Unreviewed Safety Question Requirements FUNCTIONAL AREA GOAL: A fully compliant Unreviewed Safety Question (USQ) program is implemented and maintained across the site....

102

Transuranic Waste Requirements  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The guide provides criteria for determining if a waste is to be managed in accordance with DOE M 435.1-1, Chapter III, Transuranic Waste Requirements.

1999-07-09T23:59:59.000Z

103

NP Science Network Requirements  

E-Print Network [OSTI]

Chip Watson, JLAB (CEBAF) Jason Zurawski, Internet2 (Beam Accelerator Facility (CEBAF) — the first large-scaleis in the process of upgrading CEBAF, which will double the

Dart, Eli

2013-01-01T23:59:59.000Z

104

EWEC 2007 conference, 7-10 May 2007, Milan, Italy State-of-the-art of Design and Operation of Power Systems with Large Amounts of  

E-Print Network [OSTI]

Gomez8 , Lennar Söder9 , Anser Shakoor10 , J. Charles Smith11 , Brian Parsons12 ,Frans van Hulle13 1 VTT

105

Techno-Economic Analysis of Hydrogen Fuel Cell Systems Used as an Electricity Storage Technology in a Wind Farm with Large Amounts of Intermittent Energy.  

E-Print Network [OSTI]

??With the growing demand for electricity, renewable sources of energy have garnered a lot of support from all quarters. The problem with depending on these… (more)

Sanghai, Yash

2013-01-01T23:59:59.000Z

106

Design and implementation of PAVEMON: a GIS web-based pavement monitoring system based on large amounts of heterogeneous sensors data.  

E-Print Network [OSTI]

??A web-based PAVEment MONitoring system, PAVEMON, is a GIS oriented platform for accommodating, representing, and leveraging data from a multi-modal mobile sensor system. Stated sensor… (more)

Shahini Shamsabadi, Salar

2015-01-01T23:59:59.000Z

107

A survey of factors related to the amount of science taught in the elementary school  

E-Print Network [OSTI]

of MASTER OF SCIENCE May 1983 Major Subject: Curriculum and Instruction A SURVEY OF FACTORS RELATED TO THE AMOUNT OF SCIENCE TAUGHT IN THE ELEMENTARY SCHOOL A Thesis by JOAN MARIE CHAMPLIN-TITRE Approved as to style and content by: Jon Denton.... Conclusions and Summar y Additional Research 22 22 25 42 45 46 Page REFERENCES REFERENCE NOTES APPENDIX A 49 54 54 Survey Instrument APPENDIX B 55 62 VITA Teachers' Comments 63 66 LIST OF TABLES Page TABLE 1 Teachers' Feelings Toward...

Champlin-Titre, Joan Marie

1983-01-01T23:59:59.000Z

108

Short-range precipitation forecasts using assimilation of simulated satellite water vapor profiles and column cloud liquid water amounts  

SciTech Connect (OSTI)

These observing system simulation experiments investigate the assimilation of satellite-observed water vapor and cloud liquid water data in the initialization of a limited-area primitive equations model with the goal of improving short-range precipitation forecasts. The assimilation procedure presented includes two aspects: specification of an initial cloud liquid water vertical distribution and diabatic initialization. The satellite data is simulated for the next generation of polar-orbiting satellite instruments, the Advanced Microwave Sounding Unit (AMSU) and the High-Resolution Infrared Sounder (HIRS), which are scheduled to be launched on the NOAA-K satellite in the mid-1990s. Based on cloud-top height and total column cloud liquid water amounts simulated for satellite data a diagnostic method is used to specify an initial cloud water vertical distribution and to modify the initial moisture distribution in cloudy areas. Using a diabatic initialization procedure, the associated latent heating profiles are directly assimilated into the numerical model. The initial heating is estimated by time averaging the latent heat release from convective and large-scale condensation during the early forecast stage after insertion of satellite-observed temperature, water vapor, and cloud water formation.

Wu, X.; Diak, G.R.; Hayden, C.M.; Young, J.A. [Univ. of Wisconsin, Madison, WI (United States)] [Univ. of Wisconsin, Madison, WI (United States)

1995-02-01T23:59:59.000Z

109

NISTIR 7933 Requirements and  

E-Print Network [OSTI]

NISTIR 7933 Requirements and Conformance Test Assertions for ANSI/NIST-ITL 1-2011 Record Type 18 #12;ii NISTIR 7933 Requirements and Conformance Test Assertions for ANSI/NIST-ITL 1-2011 Record Type/CTS designed to test implementations of ANSI/NIST-ITL 1- 2011 (AN-2011) "Data Format for the Interchange

110

Integrated Management Requirements mapping  

SciTech Connect (OSTI)

This document contains five appendices documenting how Sandia implemented the DOE Conduct of Operations (5480.19) and DOE Quality Assurance (5700.6C) orders. It provides a mapping of the Sandia integrated requirements to the specific requirements of each Order and a mapping to Sandia`s approved program for implementing the Conduct of Operations Order.

Holmes, J.T.; Andrews, N.S.

1992-06-01T23:59:59.000Z

111

Integrated Management Requirements mapping  

SciTech Connect (OSTI)

This document contains five appendices documenting how Sandia implemented the DOE Conduct of Operations (5480.19) and DOE Quality Assurance (5700.6C) orders. It provides a mapping of the Sandia integrated requirements to the specific requirements of each Order and a mapping to Sandia's approved program for implementing the Conduct of Operations Order.

Holmes, J.T.; Andrews, N.S.

1992-06-01T23:59:59.000Z

112

High School if required  

E-Print Network [OSTI]

Chemistry II CHEM AP 4-5 Lab required @ UNLV; contact Chemistry PHYS 182 & 182L Engineering Physics III PHYS General Chemistry I CHEM AP 3 Lab required @ UNLV; contact Chemistry CHEM 241 Organic Chemistry I & CHEM 347 Lab Techniques of Organic Chem I CHEM 242 Organic Chemistry II & CHEM 348 Lab Techniques

Walker, Lawrence R.

113

General Responsibilities and Requirements  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The material presented in this guide provides suggestions and acceptable ways of implementing DOE M 435.1-1 and should not be viewed as additional or mandatory requirements. The objective of the guide is to ensure that responsible individuals understand what is necessary and acceptable for implementing the requirements of DOE M 435.1-1.

1999-07-09T23:59:59.000Z

114

Asymptotic and measured large frequency separations  

E-Print Network [OSTI]

With the space-borne missions CoRoT and Kepler, a large amount of asteroseismic data is now available. So-called global oscillation parameters are inferred to characterize the large sets of stars, to perform ensemble asteroseismology, and to derive scaling relations. The mean large separation is such a key parameter. It is therefore crucial to measure it with the highest accuracy. As the conditions of measurement of the large separation do not coincide with its theoretical definition, we revisit the asymptotic expressions used for analysing the observed oscillation spectra. Then, we examine the consequence of the difference between the observed and asymptotic values of the mean large separation. The analysis is focused on radial modes. We use series of radial-mode frequencies to compare the asymptotic and observational values of the large separation. We propose a simple formulation to correct the observed value of the large separation and then derive its asymptotic counterpart. We prove that, apart from glitc...

Mosser, B; Belkacem, K; Goupil, M J; Baglin, A; Barban, C; Provost, J; Samadi, R; Auvergne, M; Catala, C

2012-01-01T23:59:59.000Z

115

Covariance Tapering for Likelihood Based Estimation in Large Spatial Datasets  

E-Print Network [OSTI]

Covariance Tapering for Likelihood Based Estimation in Large Spatial Datasets Cari Kaufman, Mark the likelihood can be computationally infeasible for large datasets, requiring O(n3) calculations for a dataset and Marshall, 1984). However, evaluating the likelihood requires order n3 operations for a dataset of size n

116

Formation resistivity measurements from within a cased well used to quantitatively determine the amount of oil and gas present  

DOE Patents [OSTI]

Methods to quantitatively determine the separate amounts of oil and gas in a geological formation adjacent to a cased well using measurements of formation resistivity are disclosed. The steps include obtaining resistivity measurements from within a cased well of a given formation, obtaining the porosity, obtaining the resistivity of formation water present, computing the combined amounts of oil and gas present using Archie`s Equations, determining the relative amounts of oil and gas present from measurements within a cased well, and then quantitatively determining the separate amounts of oil and gas present in the formation. 7 figs.

Vail, W.B. III

1997-05-27T23:59:59.000Z

117

Formation resistivity measurements from within a cased well used to quantitatively determine the amount of oil and gas present  

DOE Patents [OSTI]

Methods to quantitatively determine the separate amounts of oil and gas in a geological formation adjacent to a cased well using measurements of formation resistivity are disclosed. The steps include obtaining resistivity measurements from within a cased well of a given formation, obtaining the porosity, obtaining the resistivity of formation water present, computing the combined amounts of oil and gas present using Archie's Equations, determining the relative amounts of oil and gas present from measurements within a cased well, and then quantitatively determining the separate amounts of oil and gas present in the formation.

Vail, III, William B. (Bothell, WA)

1997-01-01T23:59:59.000Z

118

Transportation Infrastructure Requirement Resources  

Broader source: Energy.gov [DOE]

Federal agencies and certain state governments are required to acquire alternative fuel vehicles as part of the Energy Policy Act of 1992, though they are also entitled to choose a petroleum...

119

BES Science Network Requirements  

E-Print Network [OSTI]

the Directors of the Office of Science, Office of AdvancedOffice of Basic Energy Sciences. This is LBNL report LBNL-BES Science Network Requirements Report of the Basic Energy

Dart, Eli

2011-01-01T23:59:59.000Z

120

Timeline for Net Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

x By July 31 of each Forecast Year, BPA publishes all Load Following customers' Net Requirements data for the two years of the upcoming Rate Period. 17.6.1 7312010 Yes...

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Selected Guidance & Requirements  

Broader source: Energy.gov [DOE]

This page contains the most requested NEPA guidance and requirement documents and those most often recommended by the Office of NEPA Policy and Compliance. Documents are listed by agency, in...

122

Promulgating Nuclear Safety Requirements  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

Applies to all Nuclear Safety Requirements Adopted by the Department to Govern the Conduct of its Nuclear Activities. Cancels DOE P 410.1. Canceled by DOE N 251.85.

1996-05-15T23:59:59.000Z

123

Conditions Required by Law  

E-Print Network [OSTI]

No No Sto H 2 NoIs it required by law "Violence on children"?164.512 (c) (1) H CE may disclose to government to LEO HCE may not disclose to LEO H No Yes No Required by law: "reporting certain type of injuries"? H disclose to LEO H 164.512 (f) (1) (ii) (C)(2) It provides that the request is specific and limited in scope

Khan, Javed I.

124

Assessment of the amount of cesium-137 released into the Pacific Ocean after the Fukushima accident  

E-Print Network [OSTI]

in the neighborhood of the plant. An underestimation was noticed for stations located 30 km offshore. The resulting into the ocean from the Fukushima Daiichi nuclear power plant (NPP) after the accident in March 2011 and to gain Daiichi nuclear power plant following the earthquake and the tsunami of 11 March 2011 released large

Paris-Sud XI, Université de

125

Investigation of trace amounts of gas on microvave water-cut measurement  

E-Print Network [OSTI]

viscosity, improper separator operation, or poor separator design. Gas carry-under is believed to be one of the major causes of large allocation factors in oil and gas operations. Problems in clearly defining the three-phase stream as to flow regime...

Liu, Jin

2006-08-16T23:59:59.000Z

126

Awards Received in March 2010 Principal Investigator Department Sponsor Project Title Amount GCO OSP Number  

E-Print Network [OSTI]

FOR VISUAL REALISM IN SCALE-COMPLEX SCENES 98,337. MBF 51958 BARBASCH, DAN MATH NSF UNIPOTENT REPRESENTATIONS B SEELEY, ROBIN WEEKS, HAROLD JOHN SHOALS NSF (NSF BIO) UPGRADE OF SANITATION AND COMMUNICATION, JAMES M NAIC NSF A TECHNOLOGY DEVELOPMENT PROJECT FOR THE LARGE-N / SMALL-D SQUARE KILOMETER ARRAY

Danforth, Bryan Nicholas

127

Large Component Removal/Disposal  

SciTech Connect (OSTI)

This paper describes the removal and disposal of the large components from Maine Yankee Atomic Power Plant. The large components discussed include the three steam generators, pressurizer, and reactor pressure vessel. Two separate Exemption Requests, which included radiological characterizations, shielding evaluations, structural evaluations and transportation plans, were prepared and issued to the DOT for approval to ship these components; the first was for the three steam generators and one pressurizer, the second was for the reactor pressure vessel. Both Exemption Requests were submitted to the DOT in November 1999. The DOT approved the Exemption Requests in May and July of 2000, respectively. The steam generators and pressurizer have been removed from Maine Yankee and shipped to the processing facility. They were removed from Maine Yankee's Containment Building, loaded onto specially designed skid assemblies, transported onto two separate barges, tied down to the barges, th en shipped 2750 miles to Memphis, Tennessee for processing. The Reactor Pressure Vessel Removal Project is currently under way and scheduled to be completed by Fall of 2002. The planning, preparation and removal of these large components has required extensive efforts in planning and implementation on the part of all parties involved.

Wheeler, D. M.

2002-02-27T23:59:59.000Z

128

Project Project Funding Operational & Maintenance Costs Univ. Project Title GSF Brief Description of Project Location Amount Source  

E-Print Network [OSTI]

Estimated Annual Amount For Amount Source STATE UNIVERSITY SYSTEM 2012-2013 Fixed Capital Outlay ProjectsProject Project Funding Operational & Maintenance Costs Univ. Project Title GSF Brief Description that will respond to the latest trends in small-group learning, technology resources, and collaboration spaces

Slatton, Clint

129

Oxidation of trace amounts of transplutonium elements to the tetravalent state in solutions of mineral acids and their stabilities  

SciTech Connect (OSTI)

The behavior of trace amounts of americium(IV) in sulfuric and nitric acid solutions as a function of the mineral acid, potassium phosphotungstate, and ammonium persulfate concentrations was investigated. The stability of americium(IV) was studied. The optimal conditions and time of oxidation of trace amounts of americium to the tetravalent state were found on the basis of the experimental data obtained.

Milyukova, M.S.; Varezhkina, N.S.; Kuzovkina, E.V.; Malikov, D.A.; Myasoedov, B.F.

1989-01-01T23:59:59.000Z

130

INDICATOR: LAKE ERIE ICE COVER Winter ice cover on Lake Erie affects the amount of heat and moisture transferred  

E-Print Network [OSTI]

102 INDICATOR: LAKE ERIE ICE COVER Background Winter ice cover on Lake Erie affects the amount of heat and moisture transferred between the lake and the atmosphere. During winter, ice and snow can decrease the amount of light available below the ice surface for photosynthesis. In the absence of an ice

131

Advanced I/O for large-scale scientific applications.  

SciTech Connect (OSTI)

As scientific simulations scale to use petascale machines and beyond, the data volumes generated pose a dual problem. First, with increasing machine sizes, the careful tuning of IO routines becomes more and more important to keep the time spent in IO acceptable. It is not uncommon, for instance, to have 20% of an application's runtime spent performing IO in a 'tuned' system. Careful management of the IO routines can move that to 5% or even less in some cases. Second, the data volumes are so large, on the order of 10s to 100s of TB, that trying to discover the scientifically valid contributions requires assistance at runtime to both organize and annotate the data. Waiting for offline processing is not feasible due both to the impact on the IO system and the time required. To reduce this load and improve the ability of scientists to use the large amounts of data being produced, new techniques for data management are required. First, there is a need for techniques for efficient movement of data from the compute space to storage. These techniques should understand the underlying system infrastructure and adapt to changing system conditions. Technologies include aggregation networks, data staging nodes for a closer parity to the IO subsystem, and autonomic IO routines that can detect system bottlenecks and choose different approaches, such as splitting the output into multiple targets, staggering output processes. Such methods must be end-to-end, meaning that even with properly managed asynchronous techniques, it is still essential to properly manage the later synchronous interaction with the storage system to maintain acceptable performance. Second, for the data being generated, annotations and other metadata must be incorporated to help the scientist understand output data for the simulation run as a whole, to select data and data features without concern for what files or other storage technologies were employed. All of these features should be attained while maintaining a simple deployment for the science code and eliminating the need for allocation of additional computational resources.

Klasky, Scott (Oak Ridge National Laboratory, Oak Ridge, TN); Schwan, Karsten (Georgia Institute of Technology, Atlanta, GA); Oldfield, Ron A.; Lofstead, Gerald F., II (Georgia Institute of Technology, Atlanta, GA)

2010-01-01T23:59:59.000Z

132

Large-Scale PV Integration Study  

SciTech Connect (OSTI)

This research effort evaluates the impact of large-scale photovoltaic (PV) and distributed generation (DG) output on NV Energy’s electric grid system in southern Nevada. It analyzes the ability of NV Energy’s generation to accommodate increasing amounts of utility-scale PV and DG, and the resulting cost of integrating variable renewable resources. The study was jointly funded by the United States Department of Energy and NV Energy, and conducted by a project team comprised of industry experts and research scientists from Navigant Consulting Inc., Sandia National Laboratories, Pacific Northwest National Laboratory and NV Energy.

Lu, Shuai; Etingov, Pavel V.; Diao, Ruisheng; Ma, Jian; Samaan, Nader A.; Makarov, Yuri V.; Guo, Xinxin; Hafen, Ryan P.; Jin, Chunlian; Kirkham, Harold; Shlatz, Eugene; Frantzis, Lisa; McClive, Timothy; Karlson, Gregory; Acharya, Dhruv; Ellis, Abraham; Stein, Joshua; Hansen, Clifford; Chadliev, Vladimir; Smart, Michael; Salgo, Richard; Sorensen, Rahn; Allen, Barbara; Idelchik, Boris

2011-07-29T23:59:59.000Z

133

Improvements to Technical Specifications surveillance requirements  

SciTech Connect (OSTI)

In August 1983 an NRC task group was formed to investigate problems with surveillance testing required by Technical Specifications, and to recommend approaches to effect improvements. NUREG-1024 ( Technical Specifications-Enhancing Safety Impact'') resulted, and it contained recommendations to review the basis for test frequencies; to ensure that the tests promote safety and do not degrade equipment; and to review surveillance tests so that they do not unnecessarily burden personnel. The Technical Specifications Improvement Program (TSIP) was established in December 1984 to provide the framework for rewriting and improving the Technical Specifications. As an element of the TSIP, all Technical Specifications surveillance requirements were comprehensively examined as recommended in NUREG-1024. The results of that effort are presented in this report. The study found that while some testing at power is essential to verify equipment and system operability, safety can be improved, equipment degradation decreased, and unnecessary personnel burden relaxed by reducing the amount of testing at power.

Lobel, R.; Tjader, T.R.

1992-12-01T23:59:59.000Z

134

RADIOACTIVE MATERIAL PACKAGING TORQUE REQUIREMENTS COMPLIANCE  

SciTech Connect (OSTI)

Shipping containers used to transport radioactive material (RAM) in commerce employ a variety of closure mechanisms. Often, these closure mechanisms require a specific amount of torque be applied to a bolt, nut or other threaded fastener. It is important that the required preload is achieved so that the package testing and analysis is not invalidated for the purpose of protecting the public. Torque compliance is a means of ensuring closure preload, is a major factor in accomplishing the package functions of confinement/containment, sub-criticality, and shielding. This paper will address the importance of applying proper torque to package closures, discuss torque value nomenclature, and present one methodology to ensure torque compliance is achieved.

Watkins, R.; Leduc, D.

2011-03-24T23:59:59.000Z

135

Requirements Definition Stage  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This chapter addresses development of a Software Configuration Management Plan to track and control work products, analysis of the system owner/users' business processes and needs, translation of those processes and needs into formal requirements, and planning the testing activities to validate the performance of the software product.

1997-05-21T23:59:59.000Z

136

Minor in Philosophy Requirements  

E-Print Network [OSTI]

2012-05-23 Minor in Philosophy Requirements: 1. 18 hours of work in philosophy with grades of C- or better. 2. A 2.0 grade point average for all work attempted in philosophy. 3. 9 hours of upper division work in philosophy, with grades of C- or better. 4. Completion of at least one course, with a grade

Stowell, Michael

137

Requirements for Xenon International  

SciTech Connect (OSTI)

This document defines the requirements for the new Xenon International radioxenon system. The output of this project will be a Pacific Northwest National Laboratory (PNNL) developed prototype and a manufacturer-developed production prototype. The two prototypes are intended to be as close to matching as possible; this will be facilitated by overlapping development cycles and open communication between PNNL and the manufacturer.

Hayes, James C.; Ely, James H.

2013-09-26T23:59:59.000Z

138

Metals Production Requirements for Rapid Photovoltaics Deployment  

E-Print Network [OSTI]

If global photovoltaics (PV) deployment grows rapidly, the required input materials need to be supplied at an increasing rate. In this paper, we quantify the effect of PV deployment levels on the scale of metals production. For example, we find that if cadmium telluride {copper indium gallium diselenide} PV accounts for more than 3% {10%} of electricity generation by 2030, the required growth rates for the production of indium and tellurium would exceed historically-observed production growth rates for a large set of metals. In contrast, even if crystalline silicon PV supplies all electricity in 2030, the required silicon production growth rate would fall within the historical range. More generally, this paper highlights possible constraints to the rate of scaling up metals production for some PV technologies, and outlines an approach to assessing projected metals growth requirements against an ensemble of past growth rates from across the metals production sector. The framework developed in this paper may be...

Kavlak, Goksin; Jaffe, Robert L; Trancik, Jessika E

2015-01-01T23:59:59.000Z

139

LEGACY MANAGEMENT REQUIRES INFORMATION  

SciTech Connect (OSTI)

''Legacy Management Requires Information'' describes the goal(s) of the US Department of Energy's Office of Legacy Management (LM) relative to maintaining critical records and the way those goals are being addressed at Hanford. The paper discusses the current practices for document control, as well as the use of modern databases for both storing and accessing the data to support cleanup decisions. In addition to the information goals of LM, the Hanford Federal Facility Agreement and Consent Order, known as the ''Tri-Party Agreement'' (TPA) is one of the main drivers in documentation and data management. The TPA, which specifies discrete milestones for cleaning up the Hanford Site, is a legally binding agreement among the US Department of Energy (DOE), the Washington State Department of Ecology (Ecology), and the US Environmental Protection Agency (EPA). The TPA requires that DOE provide the lead regulatory agency with the results of analytical laboratory and non-laboratory tests/readings to help guide them in making decisions. The Agreement also calls for each signatory to preserve--for at least ten years after the Agreement has ended--all of the records in its or its contractors, possession related to sampling, analysis, investigations, and monitoring conducted. The tools used at Hanford to meet TPA requirements are also the tools that can satisfy the needs of LM.

CONNELL, C.W.; HILDEBRAND, R.D.

2006-12-14T23:59:59.000Z

140

Formation resistivity measurements from within a cased well used to quantitatively determine the amount of oil and gas present  

DOE Patents [OSTI]

Methods to quantitatively determine the separate amounts of oil and gas in a geological formation adjacent to a cased well using measurements of formation resistivity. The steps include obtaining resistivity measurements from within a cased well of a given formation, obtaining the porosity, obtaining the resistivity of formation water present, computing the combined amounts of oil and gas present using Archie's Equations, determining the relative amounts of oil and gas present from measurements within a cased well, and then quantitatively determining the separate amounts of oil and gas present in the formation. Resistivity measurements are obtained from within the cased well by conducting A.C. current from within the cased well to a remote electrode at a frequency that is within the frequency range of 0.1 Hz to 20 Hz.

Vail, III, William Banning (Bothell, WA)

2000-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Effect of different amounts and types of fat on colonic cell proliferation and fecal bile acid concentrations  

E-Print Network [OSTI]

ABSTRACT Effect of Different Amounts and Types of Fat on Colonic Cell Proliferation and Fecal Bile Acid Concentrations. (December 1992) Wen-Chi Chang, B. S. Providence University Chair of Advisory Committee: Dr. Joanne R. Lupton Dietary fat...FFFECT OF DIFFFRENT AMOUNTS AND TVPES OF FAT ON COLONIC CELL PROI. IFERATION AND FFCAI. IIII. E ACID CONCENTRATIONS A Thesis by WEN-CHI CHANG Submitted to the Office of Graduate Studies of Texas Ak M University in partial fulfillment...

Chang, Wen-Chi

1992-01-01T23:59:59.000Z

142

Composting Large Animal Carcasses  

E-Print Network [OSTI]

Disposing of large animal carcasses can be a problem for agricultural producers. Composting is a simple, low-cost method that yields a useful product that can be used as fertilizer. In this publication you'll learn the basics of composting, how...

Auvermann, Brent W.; Mukhtar, Saqib; Heflin, Kevin

2006-10-31T23:59:59.000Z

143

Documentation Requirements for Sensory Impairments  

E-Print Network [OSTI]

Documentation Requirements for Sensory Impairments Vision and Hearing Students, faculty, staff documentation requirements: 1. Requirements of the PRACTITIONER: A) Ophthalmologists and optometrists of interest. C) Documentation must be typed, dated and signed by the evaluator and submitted to ODR

144

Minimum Exergy Requirements for the Manufacturing of Carbon Nanotubes  

E-Print Network [OSTI]

The purpose of this paper is to address both the high values, and the large variation in reported values for the energy requirements for the production of carbon nanotubes. The paper includes an estimate of the standard ...

Gutowski, Timothy G.

145

BES Science Network Requirements  

SciTech Connect (OSTI)

The Energy Sciences Network (ESnet) is the primary provider of network connectivityfor the US Department of Energy Office of Science (SC), the single largest supporter of basic research in the physical sciences in the United States. In support of the Office ofScience programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 20 years.

Dart, Eli; Tierney, Brian; Dart, Eli; Biocca, A.; Carlson, R.; Chen, J.; Cotter, S.; Dattoria, V.; Davenport, J.; Gaenko, A.; Kent, P.; Lamm, M.; Miller, S.; Mundy, C.; Ndousse, T.; Pederson, M.; Perazzo, A.; Popescu, R.; Rouson, D.; Sekine, Y.; Sumpter, B.; Wang, C.-Z.; Whitelam, S.; Zurawski, J.

2011-02-01T23:59:59.000Z

146

Required Annual Notices  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298,NIST31 ORVEnergy Request For Report7Required

147

Required Annual Notices  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298,NIST31 ORVEnergy Request For Report7RequiredAnnual

148

ENVIRONMENTAL HEALTH SCIENCES Plan Requirements Campus: UMICH RG = Requirement Group  

E-Print Network [OSTI]

ENVIRONMENTAL HEALTH SCIENCES Plan Requirements Campus: UMICH RG = Requirement Group Career: GPH RQ = Requirement Program: 01848 LN = Line Plan: 3200MPH RG 5298 ENVIRONMENTAL HEALTH SCIENCES REQUIREMENTS, 643, 653, 675, 677 or 695 LN 0030 - Environmental Health Sciences: EHS 501, 506, 507 or 508 LN 0040

Shyy, Wei

149

BIOMEDICAL ENGINEERING BSE PLAN REQUIREMENTS Campus: UMICH RG = Requirement Group  

E-Print Network [OSTI]

BIOMEDICAL ENGINEERING BSE PLAN REQUIREMENTS Campus: UMICH RG = Requirement Group Career: UENG RQ = Requirement Program: LN = Line Plan: 0880BSE Sub-Plan: RG 6856 BIOMEDICAL ENGINEERING MAJOR REQUIREMENTS Effective FA05/1560 (09/06/2005) RQ 4996 Program Subjects Effective FA05/1560 (09/06/2005) LN 0010 BIOMEDE

Shyy, Wei

150

Equipment Operational Requirements  

SciTech Connect (OSTI)

The Iraq Department of Border Enforcement is rich in personnel, but poor in equipment. An effective border control system must include detection, discrimination, decision, tracking and interdiction, capture, identification, and disposition. An equipment solution that addresses only a part of this will not succeed, likewise equipment by itself is not the answer without considering the personnel and how they would employ the equipment. The solution should take advantage of the existing in-place system and address all of the critical functions. The solutions are envisioned as being implemented in a phased manner, where Solution 1 is followed by Solution 2 and eventually by Solution 3. This allows adequate time for training and gaining operational experience for successively more complex equipment. Detailed descriptions of the components follow the solution descriptions. Solution 1 - This solution is based on changes to CONOPs, and does not have a technology component. It consists of observers at the forts and annexes, forward patrols along the swamp edge, in depth patrols approximately 10 kilometers inland from the swamp, and checkpoints on major roads. Solution 2 - This solution adds a ground sensor array to the Solution 1 system. Solution 3 - This solution is based around installing a radar/video camera system on each fort. It employs the CONOPS from Solution 1, but uses minimal ground sensors deployed only in areas with poor radar/video camera coverage (such as canals and streams shielded by vegetation), or by roads covered by radar but outside the range of the radar associated cameras. This document provides broad operational requirements for major equipment components along with sufficient operational details to allow the technical community to identify potential hardware candidates. Continuing analysis will develop quantities required and more detailed tactics, techniques, and procedures.

Greenwalt, B; Henderer, B; Hibbard, W; Mercer, M

2009-06-11T23:59:59.000Z

151

Software and House Requirements Engineering  

E-Print Network [OSTI]

a requirements engineer who puts her knowledge of software construction together with her creativity to come upSoftware and House Requirements Engineering: Lessons Learned in Combatting Requirements Creep creativity to try to come up with a plan for a house that will meet the customer's requirements. The customer

Berry, Daniel M.

152

Match Pumps to System Requirements  

SciTech Connect (OSTI)

BestPractices Program tip sheet discussing pumping system efficiency matching pumps to system requirements

Not Available

2005-10-01T23:59:59.000Z

153

Gyrokinetic large eddy simulations  

SciTech Connect (OSTI)

The large eddy simulation approach is adapted to the study of plasma microturbulence in a fully three-dimensional gyrokinetic system. Ion temperature gradient driven turbulence is studied with the GENE code for both a standard resolution and a reduced resolution with a model for the sub-grid scale turbulence. A simple dissipative model for representing the effect of the sub-grid scales on the resolved scales is proposed and tested. Once calibrated, the model appears to be able to reproduce most of the features of the free energy spectra for various values of the ion temperature gradient.

Morel, P.; Navarro, A. Banon; Albrecht-Marc, M.; Carati, D. [Statistical and Plasma Physics Laboratory, Universite Libre de Bruxelles, Bruxelles 1050 (Belgium); Merz, F.; Goerler, T.; Jenko, F. [Max-Planck-Institut fuer Plasmaphysik, Boltzmannstr. 2, D-85748 Garching (Germany)

2011-07-15T23:59:59.000Z

154

GROUNDWATER DATA REQUIREMENT AND ANALYSIS C. P. Kumar  

E-Print Network [OSTI]

.0 INTRODUCTION Groundwater is used for a variety of purposes, including irrigation, drinking, and manufacturing characteristics of groundwater. Numerical models are capable of solving large and complex groundwater problems/monitoring of required data form an integral part of any groundwater modelling exercise. 2.0 DATA REQUIREMENT

Kumar, C.P.

155

The International Large Detector: Letter of Intent  

E-Print Network [OSTI]

The International Large Detector (ILD) is a concept for a detector at the International Linear Collider, ILC. The ILC will collide electrons and positrons at energies of initially 500 GeV, upgradeable to 1 TeV. The ILC has an ambitious physics program, which will extend and complement that of the Large Hadron Collider (LHC). A hallmark of physics at the ILC is precision. The clean initial state and the comparatively benign environment of a lepton collider are ideally suited to high precision measurements. To take full advantage of the physics potential of ILC places great demands on the detector performance. The design of ILD is driven by these requirements. Excellent calorimetry and tracking are combined to obtain the best possible overall event reconstruction, including the capability to reconstruct individual particles within jets for particle ow calorimetry. This requires excellent spatial resolution for all detector systems. A highly granular calorimeter system is combined with a central tracker which st...

Abe, Toshinori; Abramowicz, Halina; Adamus, Marek; Adeva, Bernardo; Afanaciev, Konstantin; Aguilar-Saavedra, Juan Antonio; Alabau Pons, Carmen; Albrecht, Hartwig; Andricek, Ladislav; Anduze, Marc; Aplin, Steve J.; Arai, Yasuo; Asano, Masaki; Attie, David; Attree, Derek J.; Burger, Jochen; Bailey, David; Balbuena, Juan Pablo; Ball, Markus; Ballin, James; Barbi, Mauricio; Barlow, Roger; Bartels, Christoph; Bartsch, Valeria; Bassignana, Daniela; Bates, Richard; Baudot, Jerome; Bechtle, Philip; Beck, Jeannine; Beckmann, Moritz; Bedjidian, Marc; Behnke, Ties; Belkadhi, Khaled; Bellerive, Alain; Bentvelsen, Stan; Bergauer, Thomas; Berggren, C.Mikael U.; Bergholz, Matthias; Bernreuther, Werner; Besancon, Marc; Besson, Auguste; Bhattacharya, Sudeb; Bhuyan, Bipul; Biebel, Otmar; Bilki, Burak; Blair, Grahame; Blumlein, Johannes; Bo, Li; Boisvert, Veronique; Bondar, A.; Bonvicini, Giovanni; Boos, Eduard; Boudry, Vincent; Bouquet, Bernard; Bouvier, Joel; Bozovic-Jelisavcic, Ivanka; Brient, Jean-Claude; Brock, Ian; Brogna, Andrea; Buchholz, Peter; Buesser, Karsten; Bulgheroni, Antonio; Butler, John; Buttar, Craig; Buzulutskov, A.F.; Caccia, Massimo; Caiazza, Stefano; Calcaterra, Alessandro; Caldwell, Allen; Callier, Stephane L.C.; Calvo Alamillo, Enrique; Campbell, Michael; Campbell, Alan J.; Cappellini, Chiara; Carloganu, Cristina; Castro, Nuno; Castro Carballo, Maria Elena; Chadeeva, Marina; Chakraborty, Dhiman; Chang, Paoti; Charpy, Alexandre; Chen, Xun; Chen, Shaomin; Chen, Hongfang; Cheon, Byunggu; Choi, Suyong; Choudhary, B.C.; Christen, Sandra; Ciborowski, Jacek; Ciobanu, Catalin; Claus, Gilles; Clerc, Catherine; Coca, Cornelia; Colas, Paul; Colijn, Auke; Colledani, Claude; Combaret, Christophe; Cornat, Remi; Cornebise, Patrick; Corriveau, Francois; Cvach, Jaroslav; Czakon, Michal; D'Ascenzo, Nicola; Da Silva, Wilfrid; Dadoun, Olivier; Dam, Mogens; Damerell, Chris; Danilov, Mikhail; Daniluk, Witold; Daubard, Guillaume; David, Dorte; David, Jacques; De Boer, Wim; De Groot, Nicolo; De Jong, Sijbrand; De Jong, Paul; De La Taille, Christophe; De Masi, Rita; De Roeck, Albert; Decotigny, David; Dehmelt, Klaus; Delagnes, Eric; Deng, Zhi; Desch, Klaus; Dieguez, Angel; Diener, Ralf; Dima, Mihai-Octavian; Dissertori, Gunther; Dixit, Madhu S.; Dolezal, Zdenek; Dolgoshein, Boris A.; Dollan, Ralph; Dorokhov, Andrei; Doublet, Philippe; Doyle, Tony; Doziere, Guy; Dragicevic, Marko; Drasal, Zbynek; Drugakov, Vladimir; Duarte Campderros, Jordi; Dulucq, Frederic; Dumitru, Laurentiu Alexandru; Dzahini, Daniel; Eberl, Helmut; Eckerlin, Guenter; Ehrenfeld, Wolfgang; Eigen, Gerald; Eklund, Lars; Elsen, Eckhard; Elsener, Konrad; Emeliantchik, Igor; Engels, Jan; Evrard, Christophe; Fabbri, Riccardo; Faber, Gerard; Faucci Giannelli, Michele; Faus-Golfe, Angeles; Feege, Nils; Feng, Cunfeng; Ferencei, Jozef; Fernandez Garcia, Marcos; Filthaut, Frank; Fleck, Ivor; Fleischer, Manfred; Fleta, Celeste; Fleury, Julien L.; Fontaine, Jean-Charles; Foster, Brian; Fourches, Nicolas; Fouz, Mary-Cruz; Frank, Sebastian; Frey, Ariane; Frotin, Mickael; Fujii, Hirofumi; Fujii, Keisuke; Fujimoto, Junpei; Fujita, Yowichi; Fusayasu, Takahiro; Fuster, Juan; Gaddi, Andrea; Gaede, Frank; Galkin, Alexei; Galkin, Valery; Gallas, Abraham; Gallin-Martel, Laurent; Gamba, Diego; Gao, Yuanning; Garrido Beltran, Lluis; Garutti, Erika; Gastaldi, Franck; Gaur, Bakul; Gay, Pascal; Gellrich, Andreas; Genat, Jean-Francois; Gentile, Simonetta; Gerwig, Hubert; Gibbons, Lawrence; Ginina, Elena; Giraud, Julien; Giraudo, Giuseppe; Gladilin, Leonid; Goldstein, Joel; Gonzalez Sanchez, Francisco Javier; Gournaris, Filimon; Greenshaw, Tim; Greenwood, Z.D.; Grefe, Christian; Gregor, Ingrid-Maria; Grenier, Gerald Jean; Gris, Philippe; Grondin, Denis; Grunewald, Martin; Grzelak, Grzegorz; Gurtu, Atul; Haas, Tobias; Haensel, Stephan; Hajdu, Csaba; Hallermann, Lea; Han, Liang; Hansen, Peter H.; Hara, Takanori; Harder, Kristian; Hartin, Anthony; Haruyama, Tomiyoshi; Harz, Martin; Hasegawa, Yoji; Hauschild, Michael; He, Qing; Hedberg, Vincent; Hedin, David; Heinze, Isa; Helebrant, Christian; Henschel, Hans; Hensel, Carsten; Hertenberger, Ralf; Herve, Alain; Higuchi, Takeo; Himmi, Abdelkader; Hironori, Kazurayama; Hlucha, Hana; Hommels, Bart; Horii, Yasuyuki; Horvath, Dezso; Hostachy, Jean-Yves; Hou, Wei-Shu; Hu-Guo, Christine; Huang, Xingtao; Huppert, Jean Francois; Ide, Yasuhiro; Idzik, Marek; Iglesias Escudero, Carmen; Ignatenko, Alexandr; Igonkina, Olga; Ikeda, Hirokazu; Ikematsu, Katsumasa; Ikemoto, Yukiko; Ikuno, Toshinori; Imbault, Didier; Imhof, Andreas; Imhoff, Marc; Ingbir, Ronen; Inoue, Eiji

2010-01-01T23:59:59.000Z

156

Large Business Development Program (Illinois)  

Broader source: Energy.gov [DOE]

The Large Business Development Program, administered by the Illinois Department of Commerce and Economic Opportunity, provides grants to large businesses for bondable business activities, including...

157

Large Magnetization at Carbon Surfaces  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Large Magnetization at Carbon Surfaces Large Magnetization at Carbon Surfaces Print Wednesday, 31 August 2011 00:00 From organic matter to pencil lead, carbon is a versatile...

158

Large Spectral Library Problem  

SciTech Connect (OSTI)

Hyperspectral imaging produces a spectrum or vector at each image pixel. These spectra can be used to identify materials present in the image. In some cases, spectral libraries representing atmospheric chemicals or ground materials are available. The challenge is to determine if any of the library chemicals or materials exist in the hyperspectral image. The number of spectra in these libraries can be very large, far exceeding the number of spectral channels collected in the Żeld. Suppose an image pixel contains a mixture of p spectra from the library. Is it possible to uniquely identify these p spectra? We address this question in this paper and refer to it as the Large Spectral Library (LSL) problem. We show how to determine if unique identiŻcation is possible for any given library. We also show that if p is small compared to the number of spectral channels, it is very likely that unique identiŻcation is possible. We show that unique identiŻcation becomes less likely as p increases.

Chilton, Lawrence K.; Walsh, Stephen J.

2008-10-03T23:59:59.000Z

159

Minimization of welding residual stress and distortion in large structures  

E-Print Network [OSTI]

1 Minimization of welding residual stress and distortion in large structures P. Michaleris at Champaign Urbana, Urbana, IL Abstract Welding distortion in large structures is usually caused by buckling due to the residual stress. In cases where the design is fixed and minimum weld size requirements

Michaleris, Panagiotis

160

Turbo King: Framework for Large-Scale Internet Delay Measurements  

E-Print Network [OSTI]

servers (which is called cache pollution) and requires large traffic overhead when deployed in large consuming half the bandwidth needed by King and reducing the impact of cache pollution by several orders building an all-to-all delay matrix between approximately 220, 000 BGP prefixes advertised in the Internet

Loguinov, Dmitri

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Large Superconducting Magnet Systems  

E-Print Network [OSTI]

The increase of energy in accelerators over the past decades has led to the design of superconducting magnets for both accelerators and the associated detectors. The use of Nb?Ti superconducting materials allows an increase in the dipole field by up to 10 T compared with the maximum field of 2 T in a conventional magnet. The field bending of the particles in the detectors and generated by the magnets can also be increased. New materials, such as Nb3Sn and high temperature superconductor (HTS) conductors, can open the way to higher fields, in the range 13–20 T. The latest generations of fusion machines producing hot plasma also use large superconducting magnet systems.

Védrine, P

2014-01-01T23:59:59.000Z

162

AMOUNT AND LEACHING POTENTIAL OF HEAVY METALS IN BARK MULCH AND COMPOST USED ON THE UNIVERSITY OF  

E-Print Network [OSTI]

AMOUNT AND LEACHING POTENTIAL OF HEAVY METALS IN BARK MULCH AND COMPOST USED ON THE UNIVERSITY mulch and compost, determine whether or not either of these substances could be significant contributors the presence of heavy metals in fresh bark mulch, soil (used in compost mixtures) and compost being used at UBC

163

National Commission on the BP Deepwater Horizon Oil Spill and Offshore Drilling THE AMOUNT AND FATE OF THE OIL  

E-Print Network [OSTI]

- 1 - National Commission on the BP Deepwater Horizon Oil Spill and Offshore Drilling THE AMOUNT AND FATE OF THE OIL ---Draft--- Staff Working Paper No. 3 Staff Working Papers are written by the staff of the National Commission on the BP Deepwater Horizon Oil Spill and Offshore Drilling for the use of members

Meyers, Steven D.

164

CHANGES IN THE AMOUNT AND PROPORTIONS OF DDT AND ITS METABOLITES, DDE AND DDD, IN THE MARINE ENVIRONMENT  

E-Print Network [OSTI]

CHANGES IN THE AMOUNT AND PROPORTIONS OF DDT AND ITS METABOLITES, DDE AND DDD, IN THE MARINE ofthe ocean and its biota offsouthern California by the pesticide, DDT. The accumulation ofDDT and the changes in proportions ofDDT and its metabolites in the ocean are described for the years 1949 to 1972

165

1. Preconstruction Phase Payments Preconstruction Phase fees are negotiated as a lump sum amount, with fees being associated with individual  

E-Print Network [OSTI]

, if any), and are to be submitted to the Facilities Design and Construction Office (FDC). If any by the schedule of values. Fee and General Conditions Pay Request Documentation: a) The overhead and profit in writing from the FSU project manager. Line item amounts from the GMP for salaries shall not be exceeded

Sura, Philip

166

Mathematical Caricature of Large Waves  

E-Print Network [OSTI]

The Kadomtsev-Petviiashvili equation is considered as a mathematical caricature of large and rogue waves.

Mikhail Kovalyov

2014-03-21T23:59:59.000Z

167

Development of large Grain/Single Crystal Niobium Cavity Technology at Jefferson Lab  

SciTech Connect (OSTI)

Approximately two years ago we started to develop high performance niobium accelerating cavities based on large grain or single crystal high purity niobium. We have fabricated and tested 15 single cell cavities of various shapes and frequencies between 1300 MHz and 2300 MHz using material from a total of 9 different very large grain niobium ingots from four niobium suppliers. The materials differed not only in grain sizes, but also in RRR ? value and in the amount of Ta contained in the material. In one ingot supplied by CBMM the central grain exceeded 7 inches in diameter and this was used to fabricate two 2.2 GHz cavities. A single crystal 1300 MHz mono-cell cavity was also produced at DESY by rolling out a single crystal to the size required for this cavity. It was sent to Jlab for surface treatment and testing. In addition, we have fabricated three 7-cell cavities: two of the Jlab high gradient (HG) shape and one of the ILC Low Loss shape. Two 9-cell TESLA shape cavities are presently in fabrication at Jlab and are close to completion.

Peter Kneisel; J. Sekutowicz; T. Carneiro; G. Ciovati

2006-10-31T23:59:59.000Z

168

A Tutorial on Detection and Characterization of Special Behavior in Large Electric Power Systems  

SciTech Connect (OSTI)

The objective of this document is to report results in the detection and characterization of special behavior in large electric power systems. Such behavior is usually dynamic in nature, but not always. This is also true for the underlying sources of special behavior. At the device level, a source of special behavior might be an automatic control system, a dynamic load, or even a manual control system that is operated according to some sharply defined policy. Other possible sources include passive system conditions, such as the state of a switched device or the amount of power carried on some critical line. Detection and characterization are based upon “signature information” that is extracted from the behavior observed. Characterization elements include the signature information itself, the nature of the behavior and its likely causes, and the associated implications for the system or for the public at large. With sufficient data and processing, this characterization may directly identify a particular condition or device at a specific location. Such conclusive results cannot always be done from just one observation, however. Information environments that are very sparse may require multiple observations, comparative model studies, and even direct testing of the system.

Hauer, John F.; DeSteese, John G.

2004-08-20T23:59:59.000Z

169

Webinar: Hydrogen Storage Materials Requirements  

Broader source: Energy.gov [DOE]

Video recording and text version of the webinar titled, Hydrogen Storage Materials Requirements, originally presented on June 25, 2013.

170

E-Print Network 3.0 - airs requirements definition Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: air. This requires a relatively small, additional energy use for pumping the heat exchange fluid and... components and the large volumes of air moving through the...

171

Large scale tracking algorithms.  

SciTech Connect (OSTI)

Low signal-to-noise data processing algorithms for improved detection, tracking, discrimination and situational threat assessment are a key research challenge. As sensor technologies progress, the number of pixels will increase signi cantly. This will result in increased resolution, which could improve object discrimination, but unfortunately, will also result in a significant increase in the number of potential targets to track. Many tracking techniques, like multi-hypothesis trackers, suffer from a combinatorial explosion as the number of potential targets increase. As the resolution increases, the phenomenology applied towards detection algorithms also changes. For low resolution sensors, "blob" tracking is the norm. For higher resolution data, additional information may be employed in the detection and classfication steps. The most challenging scenarios are those where the targets cannot be fully resolved, yet must be tracked and distinguished for neighboring closely spaced objects. Tracking vehicles in an urban environment is an example of such a challenging scenario. This report evaluates several potential tracking algorithms for large-scale tracking in an urban environment.

Hansen, Ross L.; Love, Joshua Alan; Melgaard, David Kennett; Karelitz, David B.; Pitts, Todd Alan; Zollweg, Joshua David; Anderson, Dylan Z.; Nandy, Prabal; Whitlow, Gary L.; Bender, Daniel A.; Byrne, Raymond Harry

2015-01-01T23:59:59.000Z

172

Large Bore Powder Gun Qualification (U)  

SciTech Connect (OSTI)

A Large Bore Powder Gun (LBPG) is being designed to enable experimentalists to characterize material behavior outside the capabilities of the NNSS JASPER and LANL TA-55 PF-4 guns. The combination of these three guns will create a capability to conduct impact experiments over a wide range of pressures and shock profiles. The Large Bore Powder Gun will be fielded at the Nevada National Security Site (NNSS) U1a Complex. The Complex is nearly 1000 ft below ground with dedicated drifts for testing, instrumentation, and post-shot entombment. To ensure the reliability, safety, and performance of the LBPG, a qualification plan has been established and documented here. Requirements for the LBPG have been established and documented in WE-14-TR-0065 U A, Large Bore Powder Gun Customer Requirements. The document includes the requirements for the physics experiments, the gun and confinement systems, and operations at NNSS. A detailed description of the requirements is established in that document and is referred to and quoted throughout this document. Two Gun and Confinement Systems will be fielded. The Prototype Gun will be used primarily to characterize the gun and confinement performance and be the primary platform for qualification actions. This gun will also be used to investigate and qualify target and diagnostic modifications through the life of the program (U1a.104 Drift). An identical gun, the Physics Gun, will be fielded for confirmatory and Pu experiments (U1a.102D Drift). Both guns will be qualified for operation. The Gun and Confinement System design will be qualified through analysis, inspection, and testing using the Prototype Gun for the majority of process. The Physics Gun will be qualified through inspection and a limited number of qualification tests to ensure performance and behavior equivalent to the Prototype gun. Figure 1.1 shows the partial configuration of U1a and the locations of the Prototype and Physics Gun/Confinement Systems.

Rabern, Donald A. [Los Alamos National Laboratory; Valdiviez, Robert [Los Alamos National Laboratory

2012-04-02T23:59:59.000Z

173

Prototype Vector Machine for Large Scale Semi-Supervised Learning  

SciTech Connect (OSTI)

Practicaldataminingrarelyfalls exactlyinto the supervisedlearning scenario. Rather, the growing amount of unlabeled data poses a big challenge to large-scale semi-supervised learning (SSL). We note that the computationalintensivenessofgraph-based SSLarises largely from the manifold or graph regularization, which in turn lead to large models that are dificult to handle. To alleviate this, we proposed the prototype vector machine (PVM), a highlyscalable,graph-based algorithm for large-scale SSL. Our key innovation is the use of"prototypes vectors" for effcient approximation on both the graph-based regularizer and model representation. The choice of prototypes are grounded upon two important criteria: they not only perform effective low-rank approximation of the kernel matrix, but also span a model suffering the minimum information loss compared with the complete model. We demonstrate encouraging performance and appealing scaling properties of the PVM on a number of machine learning benchmark data sets.

Zhang, Kai; Kwok, James T.; Parvin, Bahram

2009-04-29T23:59:59.000Z

174

Room at the Mountain: Estimated Maximum Amounts of Commercial Spent Nuclear Fuel Capable of Disposal in a Yucca Mountain Repository  

SciTech Connect (OSTI)

The purpose of this paper is to present an initial analysis of the maximum amount of commercial spent nuclear fuel (CSNF) that could be emplaced into a geological repository at Yucca Mountain. This analysis identifies and uses programmatic, material, and geological constraints and factors that affect this estimation of maximum amount of CSNF for disposal. The conclusion of this initial analysis is that the current legislative limit on Yucca Mountain disposal capacity, 63,000 MTHM of CSNF, is a small fraction of the available physical capacity of the Yucca Mountain system assuming the current high-temperature operating mode (HTOM) design. EPRI is confident that at least four times the legislative limit for CSNF ({approx}260,000 MTHM) can be emplaced in the Yucca Mountain system. It is possible that with additional site characterization, upwards of nine times the legislative limit ({approx}570,000 MTHM) could be emplaced. (authors)

Kessler, John H. [Electric Power Research Institute - EPRI, 3420 Hillview Avenue, Palo Alto, California 94304 (United States); Kemeny, John [University of Arizona, Tucson AZ 85721 (United States); King, Fraser [Integrity Corrosion Consulting, Ltd., 6732 Silverview Drive NW, Calgary, Alberta (Canada); Ross, Alan M. [Alan M. Ross and Associates, 1061 Gray Fox Circle Pleasanton, CA 94566 (Canada); Ross, Benjamen [Disposal Safety, Inc., Bethesda, MD 20814 (United States)

2006-07-01T23:59:59.000Z

175

Software Quality Assurance Subcommittee : Guidelines for Requirements...  

Broader source: Energy.gov (indexed) [DOE]

Software Quality Assurance Subcommittee : Guidelines for Requirements Management Software Quality Assurance Subcommittee : Guidelines for Requirements Management Requirements...

176

Frequency Control Performance Measurement and Requirements  

SciTech Connect (OSTI)

Frequency control is an essential requirement of reliable electric power system operations. Determination of frequency control depends on frequency measurement and the practices based on these measurements that dictate acceptable frequency management. This report chronicles the evolution of these measurements and practices. As technology progresses from analog to digital for calculation, communication, and control, the technical basis for frequency control measurement and practices to determine acceptable performance continues to improve. Before the introduction of digital computing, practices were determined largely by prior experience. In anticipation of mandatory reliability rules, practices evolved from a focus primarily on commercial and equity issues to an increased focus on reliability. This evolution is expected to continue and place increased requirements for more precise measurements and a stronger scientific basis for future frequency management practices in support of reliability.

Illian, Howard F.

2010-12-20T23:59:59.000Z

177

CALIFORNIA ENERGY Large HVAC Building  

E-Print Network [OSTI]

CALIFORNIA ENERGY COMMISSION Large HVAC Building Survey Information Database of Buildings over 100 Design of Large Commercial HVAC Systems research project, one of six research elements in the Integrated Design of Large Commercial HVAC Systems Integrated Design of Small Commercial HVAC Systems Integrated

178

Occupational and traning requirements for expanded coal production (as of October 1980). [Forecasting to 1995  

SciTech Connect (OSTI)

This study was initiated because of the anticipated rapid growth in trained personnel requirements in bituminous coal mining, and because the industry had already experienced significant problems in recruiting skilled manpower in the course of its employment expansion during the 1970's. Employment in bituminous coal mining is projected to nearly double, from 234,000 in 1977 to 456,000 in 1995, as the net result of a projected threefold increase in coal output to nearly 2.0 billion in 1995 and of an expected significant improvement in overall productivity. A large proportion of current coal mining employees are in occupations which require significant amounts of training for effective work performance. Employment growth to 1955 will be most rapid in those occupations requiring the greatest training or educational preparation. The new training infrastructure which has emerged to meet these needs includes both internal, company-operated training programs and those offered by various external providers. Among the latter are: Vocational schools, community colleges, and university extension departments; public agencies, such as MSHA and state mining departments; coal industry trade associations; and vendors or training consultant groups. The Conference Board survey of coal industry training programs, conducted in late 1979, was designed to provide comprehensive data on the scope of the coal industry's own training activities and on related training issues, based on a mail questionnaire survey addressed to all companies producing 300,000 or more tons per year. The training programs are described with emphasis on time changes, regional effects and implications for a coordinated plan.

Not Available

1982-04-01T23:59:59.000Z

179

ANSI Essential Requirements: Due process requirements for American  

E-Print Network [OSTI]

ANSI Essential Requirements: Due process requirements for American National Standards Edition: January 2010 Copyright by the American National Standards Institute (ANSI), 25 West 43rd Street, 4th Floor, New York, New York 10036. This material may be copied without permission from ANSI only

180

Requirements Identification, Analysis and Measurement  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Analysis, and Management adds detail and rigor to the Mission Analysis output by: Refining the initial customer input into formal Customer Requirements Identifying any...

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Toward large N thermal QCD from dual gravity: The heavy quarkonium potential  

SciTech Connect (OSTI)

We continue our study on the gravity duals for strongly coupled large N QCD with fundamental flavors both at zero and nonzero temperatures. The gravity dual at zero temperature captures the logarithmic runnings of the coupling constants at far IR and the almost conformal, albeit strongly coupled, behavior at the UV. The full UV completion of gauge theory is accomplished in the gravity side by attaching an anti-de Sitter cap to the IR geometry described in our previous work. Attaching such an anti-de Sitter cap is highly nontrivial because it amounts to finding the right interpolating geometry and sources that take us from a gravity solution with nonzero three-form fluxes to another one that has almost vanishing three-form fluxes. In this paper we give a concrete realization of such a scenario, completing the program advocated in our earlier paper. One of the main advantages of having such a background, in addition to providing a dual description of the required gauge theory, is the absence of Landau poles and consequently the UV divergences of the Wilson loops. The potential for the heaviest fundamental quark-antiquark pairs, which are like the heavy quarkonium states in realistic QCD, can be computed and their linear behavior at large separations and zero temperature could be demonstrated. At small separations the expected Coulombic behavior appears to dominate. On the other hand, at nonzero temperatures interesting properties like heavy quarkonium-type suppressions and melting are shown to emerge from our gravity dual. We provide some discussions of the melting temperature and compare our results with the charmonium spectrum and lattice simulations. We argue that, in spite of the large N nature of our construction, certain model-independent predictions can be made.

Mia, Mohammed; Dasgupta, Keshav; Gale, Charles; Jeon, Sangyong [Ernest Rutherford Physics Building, McGill University, 3600 University Street, Montreal Quebec, H3A 2T8 (Canada)

2010-07-15T23:59:59.000Z

182

Method for large and rapid terahertz imaging  

DOE Patents [OSTI]

A method of large-scale active THz imaging using a combination of a compact high power THz source (>1 watt), an optional optical system, and a camera for the detection of reflected or transmitted THz radiation, without the need for the burdensome power source or detector cooling systems required by similar prior art such devices. With such a system, one is able to image, for example, a whole person in seconds or less, whereas at present, using low power sources and scanning techniques, it takes several minutes or even hours to image even a 1 cm.times.1 cm area of skin.

Williams, Gwyn P.; Neil, George R.

2013-01-29T23:59:59.000Z

183

Humidity requirements in WSCF Laboratories  

SciTech Connect (OSTI)

The purpose of this paper is to develop and document a position on Relative Humidity (RH) requirements in the WSCF Laboratories. A current survey of equipment vendors for Organic, Inorganic and Radiochemical laboratories indicate that 25% - 80% relative humidity may meet the environmental requirements for safe operation and protection of all the laboratory equipment.

Evans, R.A.

1994-10-01T23:59:59.000Z

184

Handbook of Academic Requirements & Procedures  

E-Print Network [OSTI]

Handbook of Academic Requirements & Procedures for the Chemistry/Biotechnology Graduate Program. A detailed account of the academic requirements and procedures is provided for graduate students in chemistry; to promote consistency in procedures and standards; and to provide a basis for communication between

Kounaves, Samuel P.

185

Degree Requirements COLLEGE OF ENGINEERING  

E-Print Network [OSTI]

or better is required in ECON 2000 (Engineering Economics), Philosophy 2244 (Engineering Ethics), and ENGLDegree Requirements COLLEGE OF ENGINEERING B.S. in Electrical Engineering Effective Date: 08) 6 Total 30 MUST SELECT ONE Computer Engineering Concentration Course Name/ # Credit Hours Course

Kulp, Mark

186

Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298,NIST31 ORVEnergy Request ForForms of1, 2

187

Large Scale Energy Storage: From Nanomaterials to Large Systems  

E-Print Network [OSTI]

Large Scale Energy Storage: From Nanomaterials to Large Systems Wednesday October 26, 2011, Babbio energy storage devices. Specifically, this talk discusses 1) the challenges for grid scale of emergent technologies with ultralow costs on new energy storage materials and mechanisms. Dr. Jun Liu

Fisher, Frank

188

Part B - Requirements & Funding Information PART B - Requirements...  

Energy Savers [EERE]

to support the determinations and findings (D&F) required by FAR 17.502-2 to the contracting officer. Provide this information as an attachment or coordinate with the...

189

LARGE-APERTURE D- ACCELERATORS  

E-Print Network [OSTI]

Vignetted current profile at accelerator entrance aperture 'LARGE-APERTURE D" ACCELERATORS* 0. A. Anderson" " Lawrencen i a 9-1720 Abstract Accelerator designs are described for

Anderson, O.A.

2010-01-01T23:59:59.000Z

190

QUENCHES IN LARGE SUPERCONDUCTING MAGNETS  

E-Print Network [OSTI]

QUENCHES IN LARGE SUPERCONDUCTING MAGNETS. P. H. Eberhard,Study of an Unprotected Superconducting Coil Going Normal,"Method for Testing Superconducting Magnets," LBL Physics

Eberhard, P.H.

2010-01-01T23:59:59.000Z

191

Large Magnetization at Carbon Surfaces  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 CERN 73-11Large area avalancheLargeLargeLarge

192

Large Scale Computing and Storage Requirements for Basic Energy Sciences Research  

E-Print Network [OSTI]

photovoltaics; hydrogen storage; ultrathin epitaxial filmsstorage to obtain an accurate power spectrum, especially if the relatively rapid vibrational behavior of hydrogen

Gerber, Richard

2012-01-01T23:59:59.000Z

193

Large Scale Computing and Storage Requirements for Fusion Energy Sciences: Target 2017  

E-Print Network [OSTI]

in   the   Swarthmore   Spheromak   Experiment   showing  of  the  Swarthmore  Spheromak   Experiment  (SSX)  the   Swarthmore   Spheromak   Experiment   is   shown  

Gerber, Richard

2014-01-01T23:59:59.000Z

194

Large Scale Computing and Storage Requirements for Fusion Energy Sciences Research  

E-Print Network [OSTI]

National Ignition Facility (NIF) coming online, this is theof SRS/2wp instabilities in NIF relevant regimes. However,parameters relevant to NIF. There are important questions

Gerber, Richard

2012-01-01T23:59:59.000Z

195

Large Scale Computing and Storage Requirements for Fusion Energy Sciences Research  

E-Print Network [OSTI]

of focus include magnetohydrodynamics, plasma turbulence andsystems, with a focus on the physics of plasmas in magneticas well as space plasmas. The focus of his work is on

Gerber, Richard

2012-01-01T23:59:59.000Z

196

Harvey Wasserman! Large Scale Computing and Storage Requirements for High Energy Physics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun with Bigfront.jpgcommunity200cell 9Harvey Brooks, 1960 The ErnestHarveyHarvey

197

The International Large Detector: Letter of Intent  

E-Print Network [OSTI]

The International Large Detector (ILD) is a concept for a detector at the International Linear Collider, ILC. The ILC will collide electrons and positrons at energies of initially 500 GeV, upgradeable to 1 TeV. The ILC has an ambitious physics program, which will extend and complement that of the Large Hadron Collider (LHC). A hallmark of physics at the ILC is precision. The clean initial state and the comparatively benign environment of a lepton collider are ideally suited to high precision measurements. To take full advantage of the physics potential of ILC places great demands on the detector performance. The design of ILD is driven by these requirements. Excellent calorimetry and tracking are combined to obtain the best possible overall event reconstruction, including the capability to reconstruct individual particles within jets for particle ow calorimetry. This requires excellent spatial resolution for all detector systems. A highly granular calorimeter system is combined with a central tracker which stresses redundancy and efficiency. In addition, efficient reconstruction of secondary vertices and excellent momentum resolution for charged particles are essential for an ILC detector. The interaction region of the ILC is designed to host two detectors, which can be moved into the beam position with a push-pull scheme. The mechanical design of ILD and the overall integration of subdetectors takes these operational conditions into account.

The ILD Concept Group

2010-06-17T23:59:59.000Z

198

Streamflow forecasting for large-scale hydrologic systems  

E-Print Network [OSTI]

STREAMFLOW FORECASTING FOR LARGE-SCALE HYDROLOGIC SYSTEMS A Thesis by HAITHAM MUNIR AWWAD Submitted to the Office of Graduate Studies of Texas AkM University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE May... 1991 Major Subject: Civil Engineering STREAMFLOW FORECASTING FOR LARGE-SCALE HYDROLOGIC SYSTEMS A Thesis by HAITHAM MUNIR AWWAD Approved as to style and content by: uan B. Valdes (Chair of Committee) alph A. Wurbs (Member) Marshall J. Mc...

Awwad, Haitham Munir

1991-01-01T23:59:59.000Z

199

Proposal to Increase the Amount of the Contract about to be Awarded for the Supply of 12 Tons of Heavy Water  

E-Print Network [OSTI]

Proposal to Increase the Amount of the Contract about to be Awarded for the Supply of 12 Tons of Heavy Water

1977-01-01T23:59:59.000Z

200

Fusion technology status and requirements  

SciTech Connect (OSTI)

This paper summarizes the status of fusion technology and discusses the requirements to be met in order to build a demonstration fusion plant. Strategies and programmatic considerations in pursuing engineering feasibility are also outlined.

Thomassen, K.I.

1982-01-26T23:59:59.000Z

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Meeting Federal Energy Security Requirements  

Broader source: Energy.gov [DOE]

Presentation—given at at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meeting—discusses the opportunity to increase the scope of federal-utility partnerships for meeting energy security requirements.

202

CHEMICAL EVOLUTION OF THE LARGE MAGELLANIC CLOUD  

SciTech Connect (OSTI)

We adopt a new chemical evolution model for the Large Magellanic Cloud (LMC) and thereby investigate its past star formation and chemical enrichment histories. The delay time distribution of Type Ia supernovae recently revealed by Type Ia supernova surveys is incorporated self-consistently into the new model. The principle results are summarized as follows. The present gas mass fraction and stellar metallicity as well as the higher [Ba/Fe] in metal-poor stars at [Fe/H] < -1.5 can be more self-consistently explained by models with steeper initial mass functions. The observed higher [Mg/Fe] ({>=}0.3) at [Fe/H] {approx} -0.6 and higher [Ba/Fe] (>0.5) at [Fe/H] {approx} -0.3 could be due to significantly enhanced star formation about 2 Gyr ago. The observed overall [Ca/Fe]-[Fe/H] relation and remarkably low [Ca/Fe] (< - 0.2) at [Fe/H] > -0.6 are consistent with models with short-delay supernova Ia and with the more efficient loss of Ca possibly caused by an explosion mechanism of Type II supernovae. Although the metallicity distribution functions do not show double peaks in the models with a starburst about 2 Gyr ago, they show characteristic double peaks in the models with double starbursts {approx}200 Myr and {approx}2 Gyr ago. The observed apparent dip of [Fe/H] around {approx}1.5 Gyr ago in the age-metallicity relation can be reproduced by models in which a large amount ({approx}10{sup 9} M{sub Sun }) of metal-poor ([Fe/H] < -1) gas can be accreted onto the LMC.

Bekki, Kenji [ICRAR, M468, University of Western Australia, 35 Stirling Highway, Crawley Western Australia 6009 (Australia); Tsujimoto, Takuji [National Astronomical Observatory of Japan, Mitaka-shi, Tokyo 181-8588 (Japan)

2012-12-20T23:59:59.000Z

203

An Evaluation of the Factors that Influence the Amount of Time and Place of Service Provision in the Schools  

E-Print Network [OSTI]

of Speech-Language-Hearing: Sciences and Disorders and the Faculty of the Graduate School of the University of Kansas in partial fulfillment of the requirements for the degree of Doctor of Philosophy ___________________________________ Diane Frome... Loeb, Chairperson ___________________________________ Debora Daniels ___________________________________ Diane Nielsen ___________________________________ Holly L. Storkel ___________________________________ Betty Bunce Date...

Brandel, Jayne Michelle

2009-04-29T23:59:59.000Z

204

Large Magnetization at Carbon Surfaces  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 CERN 73-11Large area avalancheLargeLarge

205

Large Magnetization at Carbon Surfaces  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 CERN 73-11Large areaLarge Magnetization atLarge

206

Hierarchical models facilitate spatial analysis of large data sets: a case study on invasive plant species  

E-Print Network [OSTI]

LETTER Hierarchical models facilitate spatial analysis of large data sets: a case study on invasive issues require the analysis of large spatial point data sets ­ for example, modelling species distributions, abundance and spread from survey data. But modelling spatial relationships, especially in large

Silander Jr., John A.

207

Supporting Large-scale Continuous Stream Datacenters via Pub/Sub Middleware and Adaptive Transport Protocols  

E-Print Network [OSTI]

Supporting Large-scale Continuous Stream Datacenters via Pub/Sub Middleware and Adaptive Transport {mahesh, ken}@cs.cornell.edu Abstract Large-scale datacenters that handle continuous data streams require constitutes a promising area of research to address the challenges of these types of large-scale datacenters

Schmidt, Douglas C.

208

NUHOWS - Storage and Transportation of Irradiated Reactor Components in Large Packages - 13439  

SciTech Connect (OSTI)

Most irradiated reactor components (hardware such as Control Rod Blades, Fuel Channels, Poison Curtains, etc.) generated at reactors previously required significant processing for size reduction due to the available transportation casks not being physically capable of containing unprocessed material. As of July 1, 2008, disposal for this typical waste class (B and C) became inaccessible (for the major part of the nation) due to the Barnwell, SC disposal facility being closed to all but its three compact states (CT, NJ and SC). Currently in the United States, most facilities are storing their irradiated hardware on-site in the spent fuel pools. Until recently with the opening of the Waste Control Specialists' Texas disposal facility, utilities faced the challenges of spent fuel pool space and capacity management. However, even with WCS's disposal availability, the site currently has annual Curie limitations for disposal, which will continue to promote interim on-site storage until such time as disposal is available. In response, Transnuclear Inc., (TN) an AREVA company, proceeded with designing a new large Radioactive Waste Container (RWC) that can be used to package irradiated hardware without the need for significant processing. The design features of the RWC allows for intermittent loadings of the hardware for better packaging efficiency, higher packaging density, space savings and reduced cost. This RWC is also compatible with TN's on-site modular vault storage system. Once completely loaded, the RWC can be transported to an on-site storage facility, an off-site storage facility and/or an available disposal facility. To accommodate the transportation, TN has designed a large transportation cask, the MP197HB. As the original design was for transporting fuel, it contains the necessary shielding to allow for the transport of unprocessed irradiated reactor components, while significantly reducing the amount of irradiated hardware shipments required with the use of the new RWC. This paper provides information on the unique design features of the RWC, storage module vaults, MP197HB Transportation Cask and cost saving benefits of using the large RWC for packaging, storage, transport and disposal. (authors)

Rae, Glen A. [Transnuclear, Inc., 7135 Minstrel Way, Columbia, MD 21045 (United States)] [Transnuclear, Inc., 7135 Minstrel Way, Columbia, MD 21045 (United States)

2013-07-01T23:59:59.000Z

209

Compiling Utility Requirements For New Nuclear Power Plant Project  

SciTech Connect (OSTI)

Teollisuuden Voima Oy (TVO) submitted in November 2000 to the Finnish Government an application for a Decision-in-Principle concerning the construction of a new nuclear power plant in Finland. The actual investment decision can be made first after a positive decision has been made by the Government and the Parliament. Parallel to the licensing process, technical preparedness has been upheld so that the procurement process can be commenced without delay, when needed. This includes the definition of requirements for the plant and preliminary preparation of bid inquiry specifications. The core of the technical requirements corresponds to the specifications presented in the European Utility Requirement (EUR) document, compiled by major European electricity producers. Quite naturally, an amount of modifications to the EUR document are needed that take into account the country- and site-specific conditions as well as the experiences gained in the operation of the existing NPP units. Along with the EUR-related requirements concerning the nuclear island and power generation plant, requirements are specified for scope of supply as well as for a variety of issues related to project implementation. (author)

Patrakka, Eero [Teollisuuden Voima Oy, 27160 Olkiluoto (Finland)

2002-07-01T23:59:59.000Z

210

Large Sheet Process Consolidation Project  

E-Print Network [OSTI]

The purpose of this project is to reduce labor costs through the consolidation of large sheet processes into the Beta and Alpha manufacturing plants. The consolidation of equipment and departments will allow for the reduction of indirect labor...

Johnson, Keith

2005-12-16T23:59:59.000Z

211

The Description of Large Systems  

E-Print Network [OSTI]

In this paper we discuss the problems associated with the description and manipulation of large systems when their sources are not maintained as single fields. We show why and how tools that address these issues, such ...

Pitman, Kent

1984-09-01T23:59:59.000Z

212

Model Checking Software, 10th International SPIN Workshop, Portland, OR, USA, May 2003, Proceedings A Requirements Patterns-Driven Approach to  

E-Print Network [OSTI]

Diesel Corporation. Please contact this author for all correspondences. #12;requirements and high filter system to reduce the amount of soot emitted from diesel truck exhaust. Given the safety

Cheng, Betty H.C.

213

Network Requirements Workshop - Documents and Background Materials  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Science Requirements Reviews Network Requirements Reviews Documents and Background Materials Science Engagement Move your data Programs & Workshops Science...

214

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Requirements...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Requirements Management Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Requirements Management Checklist The following checklist is intended to provide system owners,...

215

HEAT Loan Minimum Standards and Requirements  

Broader source: Energy.gov [DOE]

Presents additional resources on loan standards and requirements from Elise Avers' presentation on HEAT Loan Minimum Standards and Requirements.

216

Johnson Noise Thermometry System Requirements  

SciTech Connect (OSTI)

This document is intended to capture the requirements for the architecture of the developmental electronics for the ORNL-lead drift-free Johnson Noise Thermometry (JNT) project conducted under the Instrumentation, Controls, and Human-Machine Interface (ICHMI) research pathway of the U.S. Department of Energy (DOE) Advanced Small Modular Reactor (SMR) Research and Development (R&D) program. The requirements include not only the performance of the system but also the allowable measurement environment of the probe and the allowable physical environment of the associated electronics. A more extensive project background including the project rationale is available in the initial project report [1].

Britton Jr, Charles L [ORNL; Roberts, Michael [ORNL; Ezell, N Dianne Bull [ORNL; Qualls, A L [ORNL; Holcomb, David Eugene [ORNL

2013-01-01T23:59:59.000Z

217

Challenges in large-scale graph processing on HPC platforms and the  

E-Print Network [OSTI]

Dockery #12;High Performance Computing Workloads Core-memory sized Floating point intensive Well-structured def high performance computing zone in on parallel/distributed nature and the amount of communication describe conventional workload High performance computing typically refers to the connection of a large

Yuan, Xin

218

Empirical Mode Decomposition for Intrinsic-Relationship Extraction in Large Sensor  

E-Print Network [OSTI]

. INTRODUCTION Buildings consume an enormous amount of energy in coun- tries around the world. In Japan, 28% of the energy produced is consumed in buildings [12] while in the United States it is as high as 40% [16]. Moreover, studies show that between 30-80% of it is wasted [5], [13]. Large commercial buildings

Hellerstein, Joseph M.

219

A TWO-STAGE APPROACH TO SOLVING LARGE-SCALE OPTIMAL POWER FLOWS  

E-Print Network [OSTI]

A TWO-STAGE APPROACH TO SOLVING LARGE-SCALE OPTIMAL POWER FLOWS *F e l i x F. Wu George Gross James problem is formulated as an unconstrained minimization problem using penalty functions and i s solved ] and Sasson and Merrill [ 3 ] . The s i z e and t h e extensive amount of computation involved i n solving t h

Gross, George

220

Extreme argon purity in a large, non-evacuated cryostat  

SciTech Connect (OSTI)

Liquid Argon Time Projection Chambers (LArTPCs) show promise as scalable devices for the large detectors needed for long-baseline neutrino oscillation physics. Over the last several years at Fermilab a staged approach to developing the technology for large detectors has been developed. The TPC detectors require ultra-pure liquid argon with respect to electronegative contaminants such as oxygen and water. The tolerable electronegative contamination level may be as pure as 60 parts per trillion of oxygen. Three liquid argon cryostats operated at Fermilab have achieved the extreme purity required by TPCs. These three cryostats used evacuation to remove atmospheric contaminants as the first purification step prior to filling with liquid argon. Future physics experiments may require very large detectors with tens of kilotonnes of liquid argon mass. The capability to evacuate such large cryostats adds significant cost to the cryostat itself in addition to the cost of a large scale vacuum pumping system. This paper describes a 30 ton liquid argon cryostat at Fermilab which uses purging to remove atmospheric contaminants instead of evacuation as the first purification step. This cryostat has achieved electronegative contamination levels better than 60 parts per trillion of oxygen equivalent. The results of this liquid argon purity demonstration will strongly influence the design of future TPC cryostats.

Tope, Terry; Adamowski, Mark; Carls, B.; Hahn, A.; Jaskierny, W.; Jostlein, H.; Kendziora, C.; Lockwitz, S.; Pahlka, B.; Plunkett, R.; Pordes, S.; Rebel, B.; Schmitt, R.; Skup, E.; Stancari, M.; Yang, T. [Particle Physics Division, Fermilab, P.O. Box 500, Batavia, IL 60510 (United States)

2014-01-29T23:59:59.000Z

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Renewable Energy Requirements for Future Building Codes: Options for Compliance  

SciTech Connect (OSTI)

As the model energy codes are improved to reach efficiency levels 50 percent greater than current codes, use of on-site renewable energy generation is likely to become a code requirement. This requirement will be needed because traditional mechanisms for code improvement, including envelope, mechanical and lighting, have been pressed to the end of reasonable limits. Research has been conducted to determine the mechanism for implementing this requirement (Kaufman 2011). Kaufmann et al. determined that the most appropriate way to structure an on-site renewable requirement for commercial buildings is to define the requirement in terms of an installed power density per unit of roof area. This provides a mechanism that is suitable for the installation of photovoltaic (PV) systems on future buildings to offset electricity and reduce the total building energy load. Kaufmann et al. suggested that an appropriate maximum for the requirement in the commercial sector would be 4 W/ft{sup 2} of roof area or 0.5 W/ft{sup 2} of conditioned floor area. As with all code requirements, there must be an alternative compliance path for buildings that may not reasonably meet the renewables requirement. This might include conditions like shading (which makes rooftop PV arrays less effective), unusual architecture, undesirable roof pitch, unsuitable building orientation, or other issues. In the short term, alternative compliance paths including high performance mechanical equipment, dramatic envelope changes, or controls changes may be feasible. These options may be less expensive than many renewable systems, which will require careful balance of energy measures when setting the code requirement levels. As the stringency of the code continues to increase however, efficiency trade-offs will be maximized, requiring alternative compliance options to be focused solely on renewable electricity trade-offs or equivalent programs. One alternate compliance path includes purchase of Renewable Energy Credits (RECs). Each REC represents a specified amount of renewable electricity production and provides an offset of environmental externalities associated with non-renewable electricity production. The purpose of this paper is to explore the possible issues with RECs and comparable alternative compliance options. Existing codes have been examined to determine energy equivalence between the energy generation requirement and the RECs alternative over the life of the building. The price equivalence of the requirement and the alternative are determined to consider the economic drivers for a market decision. This research includes case studies that review how the few existing codes have incorporated RECs and some of the issues inherent with REC markets. Section 1 of the report reviews compliance options including RECs, green energy purchase programs, shared solar agreements and leases, and other options. Section 2 provides detailed case studies on codes that include RECs and community based alternative compliance methods. The methods the existing code requirements structure alternative compliance options like RECs are the focus of the case studies. Section 3 explores the possible structure of the renewable energy generation requirement in the context of energy and price equivalence. The price of RECs have shown high variation by market and over time which makes it critical to for code language to be updated frequently for a renewable energy generation requirement or the requirement will not remain price-equivalent over time. Section 4 of the report provides a maximum case estimate for impact to the PV market and the REC market based on the Kaufmann et al. proposed requirement levels. If all new buildings in the commercial sector complied with the requirement to install rooftop PV arrays, nearly 4,700 MW of solar would be installed in 2012, a major increase from EIA estimates of 640 MW of solar generation capacity installed in 2009. The residential sector could contribute roughly an additional 2,300 MW based on the same code requirement levels of 4 W/ft{sup 2} of r

Dillon, Heather E.; Antonopoulos, Chrissi A.; Solana, Amy E.; Russo, Bryan J.

2011-09-30T23:59:59.000Z

222

Growth rate of late passage sarcoma cells is independent of epigenetic events but dependent on the amount of chromosomal aberrations  

SciTech Connect (OSTI)

Soft tissue sarcomas (STS) are characterized by co-participation of several epigenetic and genetic events during tumorigenesis. Having bypassed cellular senescence barriers during oncogenic transformation, the factors further affecting growth rate of STS cells remain poorly understood. Therefore, we investigated the role of gene silencing (DNA promoter methylation of LINE-1, PTEN), genetic aberrations (karyotype, KRAS and BRAF mutations) as well as their contribution to the proliferation rate and migratory potential that underlies “initial” and “final” passage sarcoma cells. Three different cell lines were used, SW982 (synovial sarcoma), U2197 (malignant fibrous histiocytoma (MFH)) and HT1080 (fibrosarcoma). Increased proliferative potential of final passage STS cells was not associated with significant differences in methylation (LINE-1, PTEN) and mutation status (KRAS, BRAF), but it was dependent on the amount of chromosomal aberrations. Collectively, our data demonstrate that these fairly differentiated/advanced cancer cell lines have still the potential to gain an additional spontaneous growth benefit without external influences and that maintenance of increased proliferative potential towards longevity of STS cells (having crossed senescence barriers) may be independent of overt epigenetic alterations. -- Highlights: Increased proliferative potential of late passage STS cells was: • Not associated with epigenetic changes (methylation changes at LINE-1, PTEN). • Not associated with mutation status of KRAS, BRAF. • Dependent on presence/absence of chromosomal aberrations.

Becerikli, Mustafa; Jacobsen, Frank; Rittig, Andrea; Köhne, Wiebke [Department of Plastic Surgery, BG University Hospital Bergmannsheil, Ruhr-University Bochum (Germany); Nambiar, Sandeep; Mirmohammadsadegh, Alireza; Stricker, Ingo; Tannapfel, Andrea [Institute of Pathology, Ruhr-University Bochum (Germany); Wieczorek, Stefan; Epplen, Joerg Thomas [Department of Human Genetics, Ruhr-University Bochum (Germany); Tilkorn, Daniel [Department of Plastic Surgery, BG University Hospital Bergmannsheil, Ruhr-University Bochum (Germany); Steinstraesser, Lars, E-mail: lars.steinstraesser@rub.de [Department of Plastic Surgery, BG University Hospital Bergmannsheil, Ruhr-University Bochum (Germany)

2013-07-15T23:59:59.000Z

223

Oil and gas exploration system and method for detecting trace amounts of hydrocarbon gases in the atmosphere  

DOE Patents [OSTI]

An oil and gas exploration system and method for land and airborne operations, the system and method used for locating subsurface hydrocarbon deposits based upon a remote detection of trace amounts of gases in the atmosphere. The detection of one or more target gases in the atmosphere is used to indicate a possible subsurface oil and gas deposit. By mapping a plurality of gas targets over a selected survey area, the survey area can be analyzed for measurable concentration anomalies. The anomalies are interpreted along with other exploration data to evaluate the value of an underground deposit. The system includes a differential absorption lidar (DIAL) system with a spectroscopic grade laser light and a light detector. The laser light is continuously tunable in a mid-infrared range, 2 to 5 micrometers, for choosing appropriate wavelengths to measure different gases and avoid absorption bands of interference gases. The laser light has sufficient optical energy to measure atmospheric concentrations of a gas over a path as long as a mile and greater. The detection of the gas is based on optical absorption measurements at specific wavelengths in the open atmosphere. Light that is detected using the light detector contains an absorption signature acquired as the light travels through the atmosphere from the laser source and back to the light detector. The absorption signature of each gas is processed and then analyzed to determine if a potential anomaly exists.

Wamsley, Paula R. (Littleton, CO); Weimer, Carl S. (Littleton, CO); Nelson, Loren D. (Evergreen, CO); O'Brien, Martin J. (Pine, CO)

2003-01-01T23:59:59.000Z

224

Computer Science Graduation Requirements Checklist  

E-Print Network [OSTI]

Computer Science Graduation Requirements Checklist ­ Fall 2008 Computer Science Courses Course Gr. Sem. Comments CSE 114 Computer Science I [prerequisite: CSE 110] CSE 214 Computer Science II CSE 215 Foundations of Computer Science CSE 219 Computer Science III CSE 220 Computer Organization CSE 300 Writing

Zadok, Erez

225

Computer Science Graduation Requirements Checklist  

E-Print Network [OSTI]

Computer Science Graduation Requirements Checklist ­ Fall 2009 Computer Science Courses Course Gr. Sem. Comments CSE 114 Computer Science I [prerequisite: CSE 110] CSE 214 Computer Science II CSE 215 Foundations of Computer Science CSE 219 Computer Science III CSE 220 Computer Organization CSE 300 Writing

Zadok, Erez

226

Handbook of Academic Requirements & Procedures  

E-Print Network [OSTI]

Handbook of Academic Requirements & Procedures for the Chemistry Graduate Program PLEASE NOTE and procedures is provided. The intent is to describe the programs and explain the rationale behind them of the Department; to promote consistency in procedures and standards; and to provide a basis for communication

Kounaves, Samuel P.

227

AMS vs. NWS: Educational Requirements  

E-Print Network [OSTI]

· Reconstruction of past climates · Climate models · Causes of past and future climate change #12;Capstone methods · Oral, written, and multimedia communication ­ Ability to create and deliver scientific ­ Ability to effectively communicate with technical and lay audiences using scientific evidence #12;Required

228

DEGREE REQUIREMENTS BIOLOGICAL ENGINEERING TECHNOLOGY  

E-Print Network [OSTI]

DEGREE REQUIREMENTS BIOLOGICAL ENGINEERING TECHNOLOGY ENVIRONMENTAL ENGINEERING TECHNOLOGY The curriculum in the technology programs must satisfy the College of Agriculture and Life Sciences (CALS for the technology programs are listed by subject matter in three major categories: (A) Basic Subjects, (B) Advanced

Walter, M.Todd

229

Documentation Requirements for Learning Disabilities  

E-Print Network [OSTI]

Documentation Requirements for Learning Disabilities Students, faculty, staff, and campus guests wishing to request accommodations due to learning disabilities should refer to the following documentation of interest. C) Documentation must be typed, dated, signed by the evaluator and submitted to ODR

230

Large Cryogenics Systems at 1.8 K  

E-Print Network [OSTI]

Cryogenics is now widely present in large accelerator projects using applied superconductivity. Economical considerations permanently require an increase of the performance of superconducting devices. One way to do this consists to lower their operating temperature and to cool them with superfluid helium. For this purpose, large cryogenic systems at 1.8 K producing refrigeration capacity in the kW range have to be developed and implemented. These cryogenic systems require large pumping capacity at very low pressure based on integral cold compression or mixed cold-warm compression. This paper describes and compares the different cooling methods with saturated or pressurised superfluid helium, gives the present status of the available process machinery with their practical performance, and reviews the different thermodynamical cycles for producing refrigeration below 2 K, with emphasis on their operational compliance.

Tavian, L

2000-01-01T23:59:59.000Z

231

Rapid Determination Of Radiostrontium In Large Soil Samples  

SciTech Connect (OSTI)

A new method for the determination of radiostrontium in large soil samples has been developed at the Savannah River Environmental Laboratory (Aiken, SC, USA) that allows rapid preconcentration and separation of strontium in large soil samples for the measurement of strontium isotopes by gas flow proportional counting. The need for rapid analyses in the event of a Radiological Dispersive Device (RDD) or Improvised Nuclear Device (IND) event is well-known. In addition, the recent accident at Fukushima Nuclear Power Plant in March, 2011 reinforces the need to have rapid analyses for radionuclides in environmental samples in the event of a nuclear accident. The method employs a novel pre-concentration step that utilizes an iron hydroxide precipitation (enhanced with calcium phosphate) followed by a final calcium fluoride precipitation to remove silicates and other matrix components. The pre-concentration steps, in combination with a rapid Sr Resin separation using vacuum box technology, allow very large soil samples to be analyzed for {sup 89,90}Sr using gas flow proportional counting with a lower method detection limit. The calcium fluoride precipitation eliminates column flow problems typically associated with large amounts of silicates in large soil samples.

Maxwell, Sherrod L.; Culligan, Brian K.; Shaw, Patrick J.

2012-05-24T23:59:59.000Z

232

Large Magnetization at Carbon Surfaces  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 CERN 73-11Large area avalancheLarge

233

Large Magnetization at Carbon Surfaces  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 CERN 73-11Large areaLarge Magnetization at

234

Large Magnetization at Carbon Surfaces  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformationPostdocs space CombinedValues shown forShadeandLargeLarge

235

Determination of the Relative Amount of Fluorine in Uranium Oxyfluoride Particles using Secondary Ion Mass Spectrometry and Optical Spectroscopy  

SciTech Connect (OSTI)

Both nuclear forensics and environmental sampling depend upon laboratory analysis of nuclear material that has often been exposed to the environment after it has been produced. It is therefore important to understand how those environmental conditions might have changed the chemical composition of the material over time, particularly for chemically sensitive compounds. In the specific case of uranium enrichment facilities, uranium-bearing particles stem from small releases of uranium hexafluoride, a highly reactive gas that hydrolyzes upon contact with moisture from the air to form uranium oxyfluoride (UO{sub 2}F{sub 2}) particles. The uranium isotopic composition of those particles is used by the International Atomic Energy Agency (IAEA) to verify whether a facility is compliant with its declarations. The present study, however, aims to demonstrate how knowledge of time-dependent changes in chemical composition, particle morphology and molecular structure can contribute to an even more reliable interpretation of the analytical results. We prepared a set of uranium oxyfluoride particles at the Institute for Reference Materials and Measurements (IRMM, European Commission, Belgium) and followed changes in their composition, morphology and structure with time to see if we could use these properties to place boundaries on the particle exposure time in the environment. Because the rate of change is affected by exposure to UV-light, humidity levels and elevated temperatures, the samples were subjected to varying conditions of those three parameters. The NanoSIMS at LLNL was found to be the optimal tool to measure the relative amount of fluorine in individual uranium oxyfluoride particles. At PNNL, cryogenic laser-induced time-resolved U(VI) fluorescence microspectroscopy (CLIFS) was used to monitor changes in the molecular structure.

Kips, R; Kristo, M J; Hutcheon, I D; Amonette, J; Wang, Z; Johnson, T; Gerlach, D; Olsen, K B

2009-05-29T23:59:59.000Z

236

Method for large-scale fabrication of atomic-scale structures on material surfaces using surface vacancies  

DOE Patents [OSTI]

A method for forming atomic-scale structures on a surface of a substrate on a large-scale includes creating a predetermined amount of surface vacancies on the surface of the substrate by removing an amount of atoms on the surface of the material corresponding to the predetermined amount of the surface vacancies. Once the surface vacancies have been created, atoms of a desired structure material are deposited on the surface of the substrate to enable the surface vacancies and the atoms of the structure material to interact. The interaction causes the atoms of the structure material to form the atomic-scale structures.

Lim, Chong Wee (Urbana, IL); Ohmori, Kenji (Urbana, IL); Petrov, Ivan Georgiev (Champaign, IL); Greene, Joseph E. (Champaign, IL)

2004-07-13T23:59:59.000Z

237

Velocity requirements for causality violation  

E-Print Network [OSTI]

We re-examine the "Regge-Tolman paradox" with reference to some recent experimental results. It is straightforward to find a formula for the velocity v of the moving system required to produce causality violation. This formula typically yields a velocity very close to the speed of light (for instance, v/c > 0.97 for X-shaped microwaves), which raises some doubts about the real physical observability of the violations. We then compute the velocity requirement introducing a delay between the reception of the primary signal and the emission of the secondary. It turns out that in principle for any delay it is possible to find moving observers able to produce active causal violation. This is mathematically due to the singularity of the Lorentz transformations for beta to 1. For a realistic delay due to the propagation of a luminal precursor, we find that causality violations in the reported experiments are still more unlikely (v/c > 0.989), and even in the hypothesis that the superluminal propagation velocity goes to infinity, the velocity requirement is bounded by v/c > 0.62. We also prove that if two macroscopic bodies exchange energy and momentum through superluminal signals, then the swap of signal source and target is incompatible with the Lorentz transformations; therefore it is not possible to distinguish between source and target, even with reference to a definite reference frame.

Giovanni Modanese

2015-01-18T23:59:59.000Z

238

Effects of engine speed, fueling rate, and combustion phasing on the thermal stratification required to limit HCCI knocking intensity.  

SciTech Connect (OSTI)

Thermal stratification has the potential to reduce pressure-rise rates and allow increased power output for HCCI engines. This paper systematically examines how the amount of thermal stratification of the core of the charge has to be adjusted to avoid excessive knock as the engine speed and fueling rate are increased. This is accomplished by a combination of multi-zone chemical-kinetics modeling and engine experiments, using iso-octane as the fuel. The experiments show that, for a low-residual engine configuration, the pressure traces are self-similar during changes to the engine speed when CA50 is maintained by adjusting the intake temperature. Consequently, the absolute pressure-rise rate measured as bar/ms increases proportionally with the engine speed. As a result, the knocking (ringing) intensity increases drastically with engine speed, unless counteracted by some means. This paper describes how adjustments of the thermal width of the in-cylinder charge can be used to limit the ringing intensity to 5 MW/m2 as both engine speed and fueling are increased. If the thermal width can be tailored without constraints, this enables smooth operation even for combinations of high speed, high load, and combustion phasing close to TDC. Since large alterations of the thermal width of the charge are not always possible, combustion retard is considered to reduce the requirement on the thermal stratification. The results show that combustion retard carries significant potential since it amplifies the benefit of a fixed thermal width. Therefore, the thermal stratification required for operation with an acceptable knocking intensity can be decreased substantially by the use of combustion retard. This enables combinations of high engine speed and high fueling rate even for operation with the naturally occurring thermal stratification. However, very precise control of the combustion phasing will likely be required for such operation.

SjŢoberg, Magnus; Dec, John E.

2004-12-01T23:59:59.000Z

239

Riddell Revolution Speed Adult Large  

E-Print Network [OSTI]

Available: Adult Football Helmet Detailed Ratings May 2012 Riddell 360 Sample 1 2 3 Size Adult Large Adult.237 0.239 Overall STAR 0.239 Best Available: A total of 15 adult football helmet models that have been values. Helmet Ratings #12;Adult Football Helmet Detailed Ratings May 2012 Schutt ION 4D Sample 1 2 3

Lu, Chang

240

Precipitation over South America during the Last Glacial Maximum: An analysis of the "amount effect"ť with a water isotope-enabled general circulation model  

E-Print Network [OSTI]

OF THE ‘‘AMOUNT EFFECT’’ Hoffmann, G. , M. Werner, and M.A. , A. N. LeGrande, and G. Hoffmann (2007), Water isotopeare prescribed as 0.5 [Hoffmann et al. , 1998] and 1.7% [

Lee, Jung-Eun; Johnson, Kathleen; Fung, Inez

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Toward Improved Support for Loosely Coupled Large Scale Simulation Workflows  

SciTech Connect (OSTI)

High-performance computing (HPC) workloads are increasingly leveraging loosely coupled large scale simula- tions. Unfortunately, most large-scale HPC platforms, including Cray/ALPS environments, are designed for the execution of long-running jobs based on coarse-grained launch capabilities (e.g., one MPI rank per core on all allocated compute nodes). This assumption limits capability-class workload campaigns that require large numbers of discrete or loosely coupled simulations, and where time-to-solution is an untenable pacing issue. This paper describes the challenges related to the support of fine-grained launch capabilities that are necessary for the execution of loosely coupled large scale simulations on Cray/ALPS platforms. More precisely, we present the details of an enhanced runtime system to support this use case, and report on initial results from early testing on systems at Oak Ridge National Laboratory.

Boehm, Swen [ORNL] [ORNL; Elwasif, Wael R [ORNL] [ORNL; Naughton, III, Thomas J [ORNL; Vallee, Geoffroy R [ORNL] [ORNL

2014-01-01T23:59:59.000Z

242

DOE-STD-1104 Requirements Crosswalk  

Office of Environmental Management (EM)

09 to DOE-STD-1104-2014 Requirements Matrix - 1 - No. Section Page Number DOE-STD-1104-2009 Requirement DOE-STD-1104-2014 Requirements Comment Gen DOE-STD-1104-2009 was broadly...

243

Physics Degree Requirements 2008 -2010 Bulletin  

E-Print Network [OSTI]

Physics Degree Requirements 2008 -2010 Bulletin Professional Option Student: __________________________ Advisor: ____________________________ Updated 2/8/08 Physics Required Cr Gr Taken PHYS 137 1 ___ ______ PHYS 461 4 ___ ______ PHYS 490 3 ___ ______ Subtotal 47 (C- or better required) Physics Electives (8 cr

Dyer, Bill

244

A Requirements Analyst's Apprentice: A Proposal  

E-Print Network [OSTI]

The Requirements Analyst's APprentice (RAAP) partially automates the modeling process involved in creating a software requirement. It uses knowledge of the specific domain and general experience regarding software requirements ...

Reubenstein, Howard

245

Utility External Disconnect Switch: Practical, Legal, and Technical Reasons to Eliminate the Requirement  

Broader source: Energy.gov [DOE]

This report documents the safe operation of PV systems without a utility external disconnect switch in several large jurisdictions. It includes recommendations for regulators contemplating utility external disconnect switch requirements.

246

Dipole aperture and superconductor requirements  

SciTech Connect (OSTI)

The cost of an accelerator is not proportional to the aperture. A change in aperture by a certain percentage results in an overall accelerator cost change by only a fraction of that percentage; the fraction may be between 0.1 and 0.5 and is almost independent of the bending field. This estimate is obtained by analyzing the superconductor requirements as a function of aperture and by making rough estimates of the largest cost items of the accelerator such as magnets and ring tunnel.

Wipf, S.L.

1983-12-11T23:59:59.000Z

247

New Solutions Require New Thinking  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAXBalanced Scorecard Federal2Energy SecondWellsWinsRules HelpSolutions Require

248

Large scale quantum mechanical enzymology  

E-Print Network [OSTI]

conventional QM methods but, due to the computational costs, as will be discussed later in this dissertation, the system sizes accessible with these approaches do not reach the requirements for studying biomolecular systems. A particularly successful brand... imaging allow certain structural information to be extracted, such as interatomic distances and torsion angles. In the all important quest for experimental agreement, it would be all too easy to assert that if simulations generate the same result...

Lever, Greg

2014-10-07T23:59:59.000Z

249

Hazardous Waste Minimum Distance Requirements (Connecticut)  

Broader source: Energy.gov [DOE]

These regulations set minimum distance requirements between certain types of facilities that generate, process, store, and dispose of hazardous waste and other land uses. The regulations require an...

250

Bioinformatics and Genomics Degree Requirements Booklet  

E-Print Network [OSTI]

Bioinformatics and Genomics Degree Requirements Booklet Fall 2010 #12;Contents Course Requirements Bioinformatics and Genomics Curriculum -------------------------------------------------------8 General #12;Bioinformatics and Genomics Option (BG

dePamphilis, Claude

251

NBP RFI: Communications Requirements- Honeywell Responses To...  

Broader source: Energy.gov (indexed) [DOE]

the National Broadband Plan by Studying the Communications Requirements of Electric Utilities To Inform Federal Smart NBP RFI: Communications Requirements- Honeywell Responses To...

252

Cold vacuum drying facility design requirements  

SciTech Connect (OSTI)

This document provides the detailed design requirements for the Spent Nuclear Fuel Project Cold Vacuum Drying Facility. Process, safety, and quality assurance requirements and interfaces are specified.

IRWIN, J.J.

1999-07-01T23:59:59.000Z

253

Studying the Communications Requirements of Electric Utilities...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Studying the Communications Requirements of Electric Utilities to Inform Federal Smart Grid Policies- Public Meeting Studying the Communications Requirements of Electric Utilities...

254

Approved for Public Release, Distribution Unlimited Flexible and large area electronics (macroelectronics) using  

E-Print Network [OSTI]

(augmented) in important electronics applications, then the materials, processes, and devices availableApproved for Public Release, Distribution Unlimited 1 Flexible and large area electronics discuss the application drivers and the technology needs and device performance requirements to enable

Alam, Muhammad A.

255

A Comparison of State-of-the-Art Technologies for Irreversible Compression of Large Medical Datasets  

E-Print Network [OSTI]

Datasets Alberto Signoroni, Mario Pezzoni, Claudia Tonoli and Riccardo Leonardi University of Brescia datasets, also keep- ing into account relevant features related to modern appli- cation requirements and infrastructures (PACS, teleradiology) involving large datasets. Reproducibility and possible extension

Signoroni, Alberto

256

A Comprehensive Energy Audit of a Large Production Unit in Six Weeks  

E-Print Network [OSTI]

Past energy audits of petrochemical plant production units at Union Carbide have demonstrated that the key to an effective, comprehensive audit of a large production unit is to minimize the time period requirement for the team activity. This paper...

Korich, R. D.

1980-01-01T23:59:59.000Z

257

Low temperature lithographically patterned metal oxide transistors for large area electronics  

E-Print Network [OSTI]

Optically transparent, wide bandgap metal oxide semiconductors are a promising candidate for large-area electronics technologies that require lightweight, temperature-sensitive flexible substrates. Because these thin films ...

Wang, Annie I. (Annie I-Jen), 1981-

2011-01-01T23:59:59.000Z

258

Membraneless hydrogen bromine laminar flow battery for large-scale energy storage  

E-Print Network [OSTI]

Electrochemical energy storage systems have been considered for a range of potential large-scale energy storage applications. These applications vary widely, both in the order of magnitude of energy storage that is required ...

Braff, William Allan

2014-01-01T23:59:59.000Z

259

Potential Climatic Impacts and Reliability of Very Large-Scale Wind Farms  

E-Print Network [OSTI]

Meeting future world energy needs while addressing climate change requires large-scale deployment of low or zero greenhouse gas (GHG) emission technologies such as wind energy. The widespread availability of wind power has ...

Wang, Chien

260

Repository disposal requirements for commercial transuranic wastes (generated without reprocessing)  

SciTech Connect (OSTI)

This report forms a preliminary planning basis for disposal of commercial transuranic (TRU) wastes in a geologic repository. Because of the unlikely prospects for commercial spent nuclear fuel reprocessing in the near-term, this report focuses on TRU wastes generated in a once-through nuclear fuel cycle. The four main objectives of this study were to: develop estimates of the current inventories, projected generation rates, and characteristics of commercial TRU wastes; develop proposed acceptance requirements for TRU wastes forms and waste canisters that ensure a safe and effective disposal system; develop certification procedures and processing requirements that ensure that TRU wastes delivered to a repository for disposal meet all applicable waste acceptance requirements; and identify alternative conceptual strategies for treatment and certification of commercial TRU first objective was accomplished through a survey of commercial producers of TRU wastes. The TRU waste acceptance and certification requirements that were developed were based on regulatory requirements, information in the literature, and from similar requirements already established for disposal of defense TRU wastes in the Waste Isolation Pilot Plant (WIPP) which were adapted, where necessary, to disposal of commercial TRU wastes. The results of the TRU waste-producer survey indicated that there were a relatively large number of producers of small quantities of TRU wastes.

Daling, P.M.; Ludwick, J.D.; Mellinger, G.B.; McKee, R.W.

1986-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

CALIFORNIA ENERGY Large HVAC Energy Impact Report  

E-Print Network [OSTI]

CALIFORNIA ENERGY COMMISSION Large HVAC Energy Impact Report Statewide Energy Impact Report are part of the Integrated Design of Large Commercial HVAC Systems research project. The reports: Productivity and Interior Environments Integrated Design of Large Commercial HVAC Systems Integrated Design

262

Large Magnetization at Carbon Surfaces  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 CERN 73-11Large area

263

Extra-Large Memory Nodes  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series toESnet4:Epitaxial Thin FilmEquipment SSRLExploringExtra-Large Memory

264

Large Magnetization at Carbon Surfaces  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformationPostdocs space CombinedValues shown forShadeandLarge

265

The Large Aperture GRB Observatory  

E-Print Network [OSTI]

The Large Aperture GRB Observatory (LAGO) is aiming at the detection of the high energy (around 100 GeV) component of Gamma Ray Bursts, using the single particle technique in arrays of Water Cherenkov Detectors (WCD) in high mountain sites (Chacaltaya, Bolivia, 5300 m a.s.l., Pico Espejo, Venezuela, 4750 m a.s.l., Sierra Negra, Mexico, 4650 m a.s.l). WCD at high altitude offer a unique possibility of detecting low gamma fluxes in the 10 GeV - 1 TeV range. The status of the Observatory and data collected from 2007 to date will be presented.

Allard, D; Asorey, H; Barros, H; Bertou, X; Castillo, M; Chirinos, J M; De Castro, A; Flores, S; González, J; Berisso, M Gomez; Grajales, J; Guada, C; Day, W R Guevara; Ishitsuka, J; López, J A; Martínez, O; Melfo, A; Meza, E; Loza, P Miranda; Barbosa, E Moreno; Murrugarra, C; Núńez, L A; Ormachea, L J Otiniano; Pérez, G; Perez, Y; Ponce, E; Quispe, J; Quintero, C; Rivera, H; Rosales, M; Rovero, A C; Saavedra, O; Salazar, H; Tello, J C; Peralda, R Ticona; Varela, E; Velarde, A; Villaseńor, L; Wahl, D; Zamalloa, M A

2009-01-01T23:59:59.000Z

266

A Qualitative Readiness-Requirements Assessment Model for Enterprise Big-Data Infrastructure Investment  

SciTech Connect (OSTI)

In the last three decades, there has been an exponential growth in the area of information technology providing the information processing needs of data-driven businesses in government, science, and private industry in the form of capturing, staging, integrating, conveying, analyzing, and transferring data that will help knowledge workers and decision makers make sound business decisions. Data integration across enterprise warehouses is one of the most challenging steps in the big data analytics strategy. Several levels of data integration have been identified across enterprise warehouses: data accessibility, common data platform, and consolidated data model. Each level of integration has its own set of complexities that requires a certain amount of time, budget, and resources to implement. Such levels of integration are designed to address the technical challenges inherent in consolidating the disparate data sources. In this paper, we present a methodology based on industry best practices to measure the readiness of an organization and its data sets against the different levels of data integration. We introduce a new Integration Level Model (ILM) tool, which is used for quantifying an organization and data system s readiness to share data at a certain level of data integration. It is based largely on the established and accepted framework provided in the Data Management Association (DAMA-DMBOK). It comprises several key data management functions and supporting activities, together with several environmental elements that describe and apply to each function. The proposed model scores the maturity of a system s data governance processes and provides a pragmatic methodology for evaluating integration risks. The higher the computed scores, the better managed the source data system and the greater the likelihood that the data system can be brought in at a higher level of integration.

Olama, Mohammed M [ORNL] [ORNL; McNair, Wade [ORNL] [ORNL; Sukumar, Sreenivas R [ORNL] [ORNL; Nutaro, James J [ORNL] [ORNL

2014-01-01T23:59:59.000Z

267

Grantee Checklist for the Inspection & Monitoring Requirement  

Broader source: Energy.gov [DOE]

This document walks Grantees through the Inspection & Monitoring requirement of the Quality Work Plan.

268

Logical Structure Extraction from Software Requirements Documents  

E-Print Network [OSTI]

Documents I. INTRODUCTION Requirements management (RM) tools store and manipu- late software requirementsLogical Structure Extraction from Software Requirements Documents Rehan Rauf, Michal Antkiewicz,mantkiew,kczarnec}@gsd.uwaterloo.ca Abstract--Software requirements documents (SRDs) are often authored in general-purpose rich-text editors

Czarnecki, Krzysztof

269

Requirements in the wild: How small companies do it Jorge Aranda, Steve Easterbrook, and Greg Wilson  

E-Print Network [OSTI]

Requirements in the wild: How small companies do it Jorge Aranda, Steve Easterbrook, and Greg}@cs.toronto.edu Abstract Small companies form a large part of the software industry, but have mostly been overlooked by the requirements engineering research community. We know very little about the techniques these companies use

Easterbrook, Steve

270

Rearranging the Exponential Wall for Large N-Body Systems  

SciTech Connect (OSTI)

The work required to solve for the fully interacting N boson wave function, which is widely believed to scale exponentially with N, is rearranged so the problem scales order by order in a perturbation series as N{sup 0}. The exponential complexity reappears in an exponential scaling with the order of our perturbation series allowing exact analytical calculations for very large N systems through low order.

Watson, Deborah K.; Dunn, Martin [Homer L. Dodge Department of Physics and Astronomy, University of Oklahoma, Norman, Oklahoma 73019 (United States)

2010-07-09T23:59:59.000Z

271

Remote power and console management in large datacenters  

E-Print Network [OSTI]

Today’s datacenters are often built of a large number of commodity hardware components. A number of common tasks including operating system installation, hardware and OS–level troubleshooting require low-level control of the machines’ console and power buttons, yet local physical access is not only impractical and error–prone but often impossible. We report on the approach used at CERN for low—level remote management of more than 9000 machines in multiple datacenters.

Horvath, A

2010-01-01T23:59:59.000Z

272

Large Scale Deployment of Renewables for Electricity Generation  

E-Print Network [OSTI]

).38 The small scale of renewable energy projects multiplies the relative costs incurred through multiple administrative processes. For example, biogas plants in Germany require several parallel permit processes designed to address issues such as EU... -cellulose material. Anaerobic digestion or gasification of biomass produces gas that can be used in similar applications to natural gas. Small-scale biogas production is now a well-established technology and large-scale application is in the advanced stages...

Neuhoff, Karsten

2006-03-14T23:59:59.000Z

273

Large aperture diffractive space telescope  

DOE Patents [OSTI]

A large (10's of meters) aperture space telescope including two separate spacecraft--an optical primary objective lens functioning as a magnifying glass and an optical secondary functioning as an eyepiece. The spacecraft are spaced up to several kilometers apart with the eyepiece directly behind the magnifying glass "aiming" at an intended target with their relative orientation determining the optical axis of the telescope and hence the targets being observed. The objective lens includes a very large-aperture, very-thin-membrane, diffractive lens, e.g., a Fresnel lens, which intercepts incoming light over its full aperture and focuses it towards the eyepiece. The eyepiece has a much smaller, meter-scale aperture and is designed to move along the focal surface of the objective lens, gathering up the incoming light and converting it to high quality images. The positions of the two space craft are controlled both to maintain a good optical focus and to point at desired targets which may be either earth bound or celestial.

Hyde, Roderick A. (Livermore, CA)

2001-01-01T23:59:59.000Z

274

The Expanded Very Large Array  

E-Print Network [OSTI]

In almost 30 years of operation, the Very Large Array (VLA) has proved to be a remarkably flexible and productive radio telescope. However, the basic capabilities of the VLA have changed little since it was designed. A major expansion utilizing modern technology is currently underway to improve the capabilities of the VLA by at least an order of magnitude in both sensitivity and in frequency coverage. The primary elements of the Expanded Very Large Array (EVLA) project include new or upgraded receivers for continuous frequency coverage from 1 to 50 GHz, new local oscillator, intermediate frequency, and wide bandwidth data transmission systems to carry signals with 16 GHz total bandwidth from each antenna, and a new digital correlator with the capability to process this bandwidth with an unprecedented number of frequency channels for an imaging array. Also included are a new monitor and control system and new software that will provide telescope ease of use. Scheduled for completion in 2012, the EVLA will prov...

Perley, R; Jackson, J; Butler, B; Carlson, B; Fort, D; Dewdney, P; Clark, B; Hayward, R; Durand, S; Revnell, M; McKinnon, M

2009-01-01T23:59:59.000Z

275

Local Transformations Requiring Infinite Rounds of Classical Communication  

E-Print Network [OSTI]

In this paper, we study the number of rounds of communication needed to implement certain tasks by local quantum operations and classical communication (LOCC). We find that the class of LOCC operations becomes strictly more powerful as more rounds of classical communication are permitted. Specifically, for every $n$, there always exists an $n$ round protocol that is impossible to implement in $n-2$ rounds. Furthermore, we show that certain entanglement transformations are possible if and only if the protocol uses an infinite (unbounded) number of rounds. Interestingly, the number of rounds required to deterministically distill bipartite entanglement from a single multipartite state can be strongly discontinuous with respect to the amount of entanglement distilled.

Eric Chitambar

2011-05-17T23:59:59.000Z

276

Demonstration of High Efficiency Elastocaloric Cooling with Large Delta- T Using NiTi Wires  

SciTech Connect (OSTI)

Vapor compression (VC) is by far the most dominant technology for meeting all cooling and refrigeration needs around the world. It is a mature technology with the efficiency of modern compressors approaching the theoretical limit, but its envi-ronmental footprint remains a global problem. VC refrigerants such as hydrochlo-roflurocarbons (HCFCs) and hydrofluorocarbons (HFCs) are a significant source of green house gas (GHG) emissions, and their global warming potential (GWP) is as high as 1000 times that of CO2. It is expected that building space cooling and re-frigeration alone will amount to {approx} 5% of primary energy consumption and {approx}5% of all CO2 emission in U.S. in 2030 . As such, there is an urgent need to develop an al-ternative high-efficiency cooling technology that is affordable and environmentally friendly. Among the proposed candidates, magnetocaloric cooling (MC) is currently received a lot of attention because of its high efficiency. However, MC is inherently expensive because of the requirement of large magnetic field and rare earth materi-als. Here, we demonstrate an entirely new type of solid-state cooling mechanism based on the latent heat of reversible martensitic transformation. We call it elasto-caloric cooling (EC) after the superelastic transformation of austenite it utilizes. The solid-state refrigerant of EC is cost-effective, and it completely eliminates the use of any refrigerants including HCFCs/HFCs. We show that the COP (coefficient of per-formance) of a jugular EC with optimized materials can be as high as > 10 with measured {Delta}T of 17 C.

Cui, Jun; Wu, Yiming; Muehlbauer, Jan; Hwang, Yunho; Radermacher, Reinhard; Fackler, Sean; Wuttig, Manfred; Takeuchi, Ichiro

2012-08-01T23:59:59.000Z

277

Locating RF Emitters with Large UAV Teams Paul Scerri, Robin Glinton, Sean Owens and Katia Sycara  

E-Print Network [OSTI]

Locating RF Emitters with Large UAV Teams Paul Scerri, Robin Glinton, Sean Owens and Katia Sycara efficient way for a team of UAVs with Received Signal Strength Indicator (RSSI) sen- sors to locate radio locations requires integrating multiple signals from different UAVs into a Bayesian filter, hence requir

Scerri, Paul

278

Geometry optimization methods for modeling large molecules O don Farkasa,*, H. Bernhard Schlegelb  

E-Print Network [OSTI]

Geometry optimization methods for modeling large molecules O¨ do¨n Farkasa,*, H. Bernhard Schlegelb, Wayne State University, Detroit, USA Abstract Geometry optimization is an essential part of quantum that there are different requirements for a chosen optimization method. The proposed method aims to meet two requirements

Schlegel, H. Bernhard

279

The Micro-foundations of Alignment among Sponsors and Contractors on Large Engineering Projects.  

E-Print Network [OSTI]

IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF DOCTOR OF PHILOSOPHY IN ENGINEERING SYSTEMS fulfillment of the requirements for the degree of Doctor of Philosophy in Engineering Systems Abstract Large, risk, metrics and incentives) were identified that establish the inter-firm interactions through which

de Weck, Olivier L.

280

Optimal Selection of AC Cables for Large Scale Offshore Wind Farms  

E-Print Network [OSTI]

Optimal Selection of AC Cables for Large Scale Offshore Wind Farms Peng Hou, Weihao Hu, Zhe Chen@et.aau.dk, whu@iet.aau.dk, zch@iet.aau.dk Abstract--The investment of large scale offshore wind farms is high the operational requirements of the offshore wind farms and the connected power systems. In this paper, a new cost

Hu, Weihao

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

A full-scale approximation of covariance functions for large spatial data sets  

E-Print Network [OSTI]

A full-scale approximation of covariance functions for large spatial data sets Huiyan Sang in spatial statistics but face tremendous computational challenges for very large data sets. The model fitting and spatial prediction of such models typically require O(n3 ) operations for a data set of size n

Huang, Jianhua

282

SEQUENCING TECHNOLOGIES Microdroplet-based PCR enrichment for large-scale  

E-Print Network [OSTI]

SEQUENCING TECHNOLOGIES Microdroplet-based PCR enrichment for large-scale targeted sequencing.1126/science.1181498) Genome sequencing for large-scale population-based studies requires technologies generated in this study is expected to be a useful resource for examining the molecular characteristics

Rosenberg, Noah

283

Proceedings of the Australian Committee on Large Dams Conference, Melbourne, Victoria, Australia. November 2004  

E-Print Network [OSTI]

Proceedings of the Australian Committee on Large Dams Conference, Melbourne, Victoria, Australia. November 2004 ANCOLD 2004 Conference Page 1 TRANSPORTATION MODEL FOR EVACUATION IN ESTIMATING DAM FAILURE and requiring only a reasonable level of effort to #12;Proceedings of the Australian Committee on Large Dams

Bowles, David S.

284

Adaptive Optics for Large Telescopes  

SciTech Connect (OSTI)

The use of adaptive optics was originally conceived by astronomers seeking to correct the blurring of images made with large telescopes due to the effects of atmospheric turbulence. The basic idea is to use a device, a wave front corrector, to adjust the phase of light passing through an optical system, based on some measurement of the spatial variation of the phase transverse to the light propagation direction, using a wave front sensor. Although the original concept was intended for application to astronomical imaging, the technique can be more generally applied. For instance, adaptive optics systems have been used for several decades to correct for aberrations in high-power laser systems. At Lawrence Livermore National Laboratory (LLNL), the world's largest laser system, the National Ignition Facility, uses adaptive optics to correct for aberrations in each of the 192 beams, all of which must be precisely focused on a millimeter scale target in order to perform nuclear physics experiments.

Olivier, S

2008-06-27T23:59:59.000Z

285

Scaling self-organizing maps to model large cortical networks  

E-Print Network [OSTI]

Self-organizing computational models with specific intracortical connections can explain many functional features of visual cortex, such as topographic orientation and ocular dominance maps. However, due to their computational requirements, it is difficult to use such detailed models to study large-scale phenomena like object segmentation and binding, object recognition, tilt illusions, optic flow, and fovea periphery interaction. This paper introduces two techniques that make large simulations practical. First, a set of general linear scaling equations for the RF-LISSOM self-organizing model is derived and shown to result in quantitatively equivalent maps over a wide range of simulation sizes. This capability makes it possible to debug small simulations and then scale them up to larger simulations only when needed. The scaling equations also facilitate the comparison of biological maps and parameters between individuals and species with different brain region sizes. Second, the equations are combined into a new growing map method called GLISSOM, which dramatically reduces the memory and computational requirements of large self-organizing networks. With GLISSOM it should be possible to simulate all of human V1 at the single-column level using existing supercomputers, making detailed computational study of large-scale phenomena possible.

2004-01-01T23:59:59.000Z

286

Avian populations of urban woodlands: comparisons, habitat requirements, and management implications  

E-Print Network [OSTI]

woodland transects. The bird populations of three urban areas were compared. As amount of vegetation increased, number of species, total individuals, and bird species diversity also increased. Urban residential areas were compared to Hensel Park, a...-sized natural area. Numbers of individuals and species were much lower in the large- sized natural area. Nany species preferred urban woodlands. Open and closed parkland transects were compared to the moderately and heavily vegetated urban areas, Species...

Mitchnick, Alan David

1979-01-01T23:59:59.000Z

287

Visualization of Large-Scale Distributed Data  

E-Print Network [OSTI]

that are now considered the "lenses" for examining large-scale data. THE LARGE-SCALE DATA VISUALIZATIONVisualization of Large-Scale Distributed Data Jason Leigh1 , Andrew Johnson1 , Luc Renambot1 representation of data and the interactive manipulation and querying of the visualization. Large-scale data

Johnson, Andrew

288

Large optics inspection, tilting, and washing stand  

DOE Patents [OSTI]

A large optics stand provides a risk free means of safely tilting large optics with ease and a method of safely tilting large optics with ease. The optics are supported in the horizontal position by pads. In the vertical plane the optics are supported by saddles that evenly distribute the optics weight over a large area.

Ayers, Marion Jay (Brentwood, CA); Ayers, Shannon Lee (Brentwood, CA)

2010-08-24T23:59:59.000Z

289

Large optics inspection, tilting, and washing stand  

DOE Patents [OSTI]

A large optics stand provides a risk free means of safely tilting large optics with ease and a method of safely tilting large optics with ease. The optics are supported in the horizontal position by pads. In the vertical plane the optics are supported by saddles that evenly distribute the optics weight over a large area.

Ayers, Marion Jay; Ayers, Shannon Lee

2012-10-09T23:59:59.000Z

290

V-TOUGH: An enhanced version of the TOUGH code for the thermal and hydrologic simulation of large-scale problems in nuclear waste isolation  

SciTech Connect (OSTI)

The TOUGH code developed at Lawrence Berkeley Laboratory (LBL) is being extensively used to numerically simulate the thermal and hydrologic environment around nuclear waste packages in the unsaturated zone for the Yucca Mountain Project. At the Lawrence Livermore National Laboratory (LLNL) we have rewritten approximately 80 percent of the TOUGH code to increase its speed and incorporate new options. The geometry of many problems requires large numbers of computational elements elements in order to realistically model detailed physical phenomena, and, as a result, large amounts of computer time are needed. In order to increase the speed of the code we have incorporated fast linear equation solvers, vectorization of substantial portions of code, improved automatic time stepping, and implementation of table look-up for the steam table properties. These enhancements have increased the speed of the code for typical problems by a factor of 20 on the Cray 2 computer. In addition to the increase in computational efficiency we have added several options: vapor pressure lowering; equivalent continuum treatments of fractures; energy and material volumetric, mass and flux accounting; and Stefan-Boltzmann radiative heat transfer. 5 refs.

Nitao, J.J.

1989-11-06T23:59:59.000Z

291

IEEE TRANSACTIONS ON POWER SYSTEMS, VOL. 26, NO. 4, NOVEMBER 2011 2197 Reserve Requirements for Wind Power Integration: A  

E-Print Network [OSTI]

for Wind Power Integration: A Scenario-Based Stochastic Programming Framework Anthony Papavasiliou, Student-stage stochastic programming model for committing reserves in systems with large amounts of wind power. We describe wind power generation in terms of a representative set of appropriately weighted scenarios, and we

Oren, Shmuel S.

292

A Stochastic Unit-Commitment Model to Estimate the Costs of Changing Power Plant Operation under High Amounts of Intermittent Wind Power  

E-Print Network [OSTI]

) a market for district heating and process heat. Time series for the wind power production rely on timeA Stochastic Unit-Commitment Model to Estimate the Costs of Changing Power Plant Operation under High Amounts of Intermittent Wind Power Integration Meibom, P.1 , Brand, H.2 , Barth, R.2 and Weber, C

293

Evaluation of the Daylight Cycle of Model-Predicted Cloud Amount and Condensed Water Path over Europe with Observations from MSG SEVIRI  

E-Print Network [OSTI]

Evaluation of the Daylight Cycle of Model-Predicted Cloud Amount and Condensed Water Path over accurate information on diurnal cycles during daylight hours of cloud properties over land and ocean surfaces. This paper evaluates the daylight cycle of CA and CWP as predicted by the Regional Atmospheric

Stoffelen, Ad

294

J. Non-Newtonian Fluid Mech. 143 (2007) 3847 Flow development in compression of a finite amount of a Bingham plastic  

E-Print Network [OSTI]

of a Bingham plastic Georgios C. Floridesa, Andreas N. Alexandroua, Georgios C. Georgioub, a Mechanical amount of a Bingham plastic is investigated by means of numerical simulations. The problem relates is modelled in Lagrangian coordinates using the Papanastasiou regularization for the Bingham plastic

Georgiou, Georgios

295

DISPOSAL OF EMPTY CHEMICAL CONTAINERS Empty chemical containers can contain residual amounts of chemicals. In an effort to ensure that this residue is  

E-Print Network [OSTI]

containers or any plastic containers, plastic tubing, or plastic beakers that do not meet the recyclingDISPOSAL OF EMPTY CHEMICAL CONTAINERS Empty chemical containers can contain residual amounts or properly dispose of these containers, the following procedure has been developed by EHS in conjunction

Maroncelli, Mark

296

amount of CO2 ice in a martian polar cap can be set by the condition that it not liquefy at its base as a  

E-Print Network [OSTI]

amount of CO2 ice in a martian polar cap can be set by the condition that it not liquefy at its-particle irradiation experiments with 2.5% H2O in CH4-NH3 atmospheres, organic sol- ids are also plentifully produced

Capone, Douglas G.

297

Proposal to increase the amount of an existing contract for the provision of a high-speed data circuit to the USA  

E-Print Network [OSTI]

This document concerns the proposal to increase the authorized amount of an existing contract for the provision of a high-speed data circuit for Wide Area Network (WAN) connectivity between CERN and the STARLIGHT Internet Exchange in Chicago, USA. The extension will be negotiated by CERN on behalf of its partners, CNRS/IN2P3 (FR), the US Department of Energy (DoE) through the California Institute of Technology (Caltech), the US National Science Foundation (NSF), the Canadian high-energy physics community through the University of Victoria (Canada), the World Health Organization (WHO) in Geneva and the European Union funded DataTAG project. The Finance Committee is invited to approve the increase of the authorized amount of the existing contract with T-SYSTEMS INTERNATIONAL (DE) for the provision of a high-speed data circuit for an additional amount of 1 731 106 euros (2 596 660 Swiss francs), bringing the total authorized limit to 5 821 000 Swiss francs, not subject to revision. The amount in Swiss francs has...

2003-01-01T23:59:59.000Z

298

Scientific databases have recently become a challenging research area for a number of reasons: 1) the amount of data stored in scientific  

E-Print Network [OSTI]

measures, solar radiation, and output of numeric models of ground­water flow or weather fore­ casting of reasons: 1) the amount of data stored in scientific databases is rapidly increasing, with orders of magnitude increases on the horizon, 2) the data are becoming increasing complex, as more complicated data

Ward, Matthew

299

Bacteria that generate significant amounts of electricity could be used in microbial fuel cells to provide power in remote environments or to convert  

E-Print Network [OSTI]

Bacteria that generate significant amounts of electricity could be used in microbial fuel cells to provide power in remote environments or to convert waste to electricity. Professor Derek Lovley from at Heriot-Watt University, Edinburgh. The researchers isolated a strain of Geobacter sulfurreducens which

Lovley, Derek

300

The amount of power in the wind is very dependent on the speed of the wind. Because the power in the wind  

E-Print Network [OSTI]

the potential benefits of a wind power installation, wind speeds and other characteristics of a site's wind for potential wind power sites. However, these maps do not elimi- nate the need for more precise and thoroughThe amount of power in the wind is very dependent on the speed of the wind. Because the power

Massachusetts at Amherst, University of

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Physics Degree Requirements 2008-2010 Bulletin  

E-Print Network [OSTI]

Physics Degree Requirements 2008-2010 Bulletin Interdisciplinary Option Student: ___________________ Advisor: ________________ Option: ________________ Updated 2/8/08 Physics Required Cr Gr Taken PHYS 137 1) Physics Electives (3 cr; 253 and 300) PHYS _____ ___ ___ ______ PHYS _____ ___ ___ ______ PHYS

Dyer, Bill

302

Secondary Mathematics Teacher Certification Requirements Mathematics  

E-Print Network [OSTI]

Secondary Mathematics Teacher Certification Requirements Mathematics Undergraduate Program:______________ Date:______________ Date:______________ Date:______________ MATHEMATICS CORE REQUIREMENTS MATH 151 Introduction to Mathematical Analysis I CMSC 201 Computer Science I MATHEMATICS EDUCATION CONCENTRATION

Maryland, Baltimore County, University of

303

City of Dubuque- Solar Thermal Licensing Requirement  

Broader source: Energy.gov [DOE]

The City of Dubuque requires a Solar Thermal License in order for a person to install a solar thermal project on a home or business. The requirement does not apply to solar photovoltaics. The...

304

Salt Lake City- High Performance Buildings Requirement  

Broader source: Energy.gov [DOE]

Salt Lake City's mayor issued an executive order in July 2005 requiring that all public buildings owned and controlled by the city be built or renovated to meet the requirements of LEED "silver"...

305

Relaxing a large cosmological constant  

E-Print Network [OSTI]

The cosmological constant (CC) problem is the biggest enigma of theoretical physics ever. In recent times, it has been rephrased as the dark energy problem in order to encompass a wider spectrum of possibilities. It is, in any case, a polyhedric puzzle with many faces, including the cosmic coincidence problem, i.e. why the density of matter is presently so close to the CC density. However, the oldest, toughest and most intriguing face of this polyhedron is the big CC problem, namely why the measured value of the CC at present is so small as compared to any typical density scale existing in high energy physics, especially taking into account the many phase transitions that our Universe has undergone since the early times, including inflation. In this letter, we propose to extend the field equations of General Relativity by including a class of invariant terms that automatically relax the value of the CC irrespective of the initial size of the vacuum energy in the early epochs. We show that, at late times, the Universe enters an eternal de Sitter stage mimicking a tiny positive cosmological constant. Thus, these models could solve the big CC problem and have also a bearing on the cosmic coincidence problem. Remarkably, they mimic the LCDM model to a large extent, but they still leave some characteristic imprints that should be testable in the next generation of experiments.

Florian Bauer; Joan Sola; Hrvoje Stefancic

2009-07-23T23:59:59.000Z

306

Delegation Procedures - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Energy's primary means of establishing policies, requirements, responsibilities, and procedures for Departmental elements and contractors. Directives Program Management Camille...

307

Secondary Science Teacher Certification Requirements Undergraduate Program  

E-Print Network [OSTI]

:____________________________________________ Initial GPA: _________ Campus ID: ____________________ Advisor _________ _________ _____ _____ Mathematics Requirements: STAT 350 Statistics with Applications OR STAT 351 Applied Statistics for Business

Maryland, Baltimore County, University of

308

Clean Air Act Requirements: Uranium Mill Tailings  

E-Print Network [OSTI]

EPA'S Clean Air Act Requirements: Uranium Mill Tailings Radon Emissions Rulemaking Reid J. Rosnick requirements for operating uranium mill tailings (Subpart W) Status update on Subpart W activities Outreach/Communications #12;3 EPA Regulatory Requirements for Operating Uranium Mill Tailings (Clean Air Act) · 40 CFR 61

309

Materials Science and Engineering Graduate Program Requirements  

E-Print Network [OSTI]

Materials Science and Engineering Graduate Program Requirements The Department of Materials Science-Thesis option requires a Special Project, and the Ph.D. degree requires a Doctoral Dissertation. MASTER (6034), Advanced Materials Techniques: Experiment, Theory, and Characterization (6011), and Engineering

Simons, Jack

310

ORIGINAL ARTICLE Information requirements analysis for holonic  

E-Print Network [OSTI]

ORIGINAL ARTICLE Information requirements analysis for holonic manufacturing systems in a virtual and development of holonic manu- facturing systems requires careful, and sometimes risky, decision making, the authors propose a methodology for a holonic manufacturing systems requirement analysis that is based

311

FCEDS General Education Requirements (Updated 2013)  

E-Print Network [OSTI]

FCEDS General Education Requirements (Updated 2013) This proposal outlines a plan that would allow a transfer student to apply an Associate of Arts or Associate of Science degree to meet the General Education requirements of the Family and Consumer Sciences Education and Studies (FCEDS) curriculum. The required

Mayfield, John

312

Special Contract Requirements Enclosure 2 INSTRUCTIONS TO CONTRACTING OFFICERS: The Special Contract Requirement "Workers  

E-Print Network [OSTI]

Special Contract Requirements Enclosure 2 INSTRUCTIONS TO CONTRACTING OFFICERS: The Special Contract Requirement "Workers Compensation Insurance (Defense Base Act) (APRIL 2011)" shall be included in the contract as applicable. Whenever Defense Base Act (DBA) insurance is required under the contract

US Army Corps of Engineers

313

Requirements in DOE O 5480.19, Conduct of Operations Requirements...  

Broader source: Energy.gov (indexed) [DOE]

Requirements in DOE O 5480.19, Conduct of Operations Requirements for DOE Facilities Cross-referenced to DOE O 422.1, Conduct of Operations. Requirements in DOE O 5480.19, Conduct...

314

Calculations in support of a potential definition of large release  

SciTech Connect (OSTI)

The Nuclear Regulatory Commission has stated a hierarchy of safety goals with the qualitative safety goals as Level I of the hierarchy, backed up by the quantitative health objectives as Level II and the large release guideline as Level III. The large release guideline has been stated in qualitative terms as a magnitude of release of the core inventory whose frequency should not exceed 10{sup -6} per reactor year. However, the Commission did not provide a quantitative specification of a large release. This report describes various specifications of a large release and focuses, in particular, on an examination of releases which have a potential to lead to one prompt fatality in the mean. The basic information required to set up the calculations was derived from the simplified source terms which were obtained from approximations of the NUREG-1150 source terms. Since the calculation of consequences is affected by a large number of assumptions, a generic site with a (conservatively determined) population density and meteorology was specified. At this site, various emergency responses (including no response) were assumed based on information derived from earlier studies. For each of the emergency response assumptions, a set of calculations were performed with the simplified source terms; these included adjustments to the source terms, such as the timing of the release, the core inventory, and the release fractions of different radionuclides, to arrive at a result of one mean prompt fatality in each case. Each of the source terms, so defined, has the potential to be a candidate for a large release. The calculations show that there are many possible candidate source terms for a large release depending on the characteristics which are felt to be important.

Hanson, A.L.; Davis, R.E.; Mubayi, V.

1994-05-01T23:59:59.000Z

315

Evaluation of airborne geophysical surveys for large-scale mapping of contaminated mine pools: draft final report  

SciTech Connect (OSTI)

Decades of underground coal mining has left about 5,000 square miles of abandoned mine workings that are rapidly filling with water. The water quality of mine pools is often poor; environmental regulatory agencies are concerned because water from mine pools could contaminate diminishing surface and groundwater supplies. Mine pools are also a threat to the safety of current mining operations. Conversely, mine pools are a large, untapped water resource that, with treatment, could be used for a variety of industrial purposes. Others have proposed using mine pools in conjunction with heat pumps as a source of heating and cooling for large industrial facilities. The management or use of mine pool water requires accurate maps of mine pools. West Virginia University has predicted the likely location and volume of mine pools in the Pittsburgh Coalbed using existing mine maps, structure contour maps, and measured mine pool elevations. Unfortunately, mine maps only reflect conditions at the time of mining, are not available for all mines, and do not always denote the maximum extent of mining. Since 1999, the National Energy Technology Laboratory (NETL) has been evaluating helicopter-borne, electromagnetic sensing technologies for the detection and mapping of mine pools. Frequency domain electromagnetic sensors are able to detect shallow mine pools (depth < 50 m) if there is sufficient contrast between the conductance of the mine pool and the conductance of the overburden. The mine pools (conductors) most confidently detected by this technology are overlain by thick, resistive sandstone layers. In 2003, a helicopter time domain electromagnetic sensor was applied to mined areas in southwestern Virginia in an attempt to increase the depth of mine pool detection. This study failed because the mine pool targets were thin and not very conductive. Also, large areas of the surveys were degraded or made unusable by excessive amounts of cultural electromagnetic noise that obscured the subtle mine pool anomalies. However, post-survey modeling suggested that thicker, more conductive mine pools might be detected at a more suitable location. The current study sought to identify the best time domain electromagnetic sensor for detecting mine pools and to test it in an area where the mine pools are thicker and more conductive that those in southwestern Virginia. After a careful comparison of all airborne time domain electromagnetic sensors (including both helicopter and fixed-wing systems), the SkyTEM system from Denmark was determined to be the best technology for this application. Whereas most airborne time domain electromagnetic systems were developed to find large, deep, highly conductive mineral deposits, the SkyTEM system is designed for groundwater exploration studies, an application similar to mine pool detection.

Geosciences Division, National Energy Technology Laboratory, US Department of Energy, Pittsburgh, PA; Hammack, R.W.

2006-12-28T23:59:59.000Z

316

NON RESIDENT ALIEN REQUIRED DOCUMENTS CLASSIFICATION REQUIRED ATTACHEMENTS MUST BE SUBMITTED WITH THE  

E-Print Network [OSTI]

NON RESIDENT ALIEN REQUIRED DOCUMENTS CLASSIFICATION REQUIRED ATTACHEMENTS MUST BE SUBMITTED WITH THE PAYROLL DOCUMENTS AND CITIZENSHIP STATUS FORM Permanent Resident Resident Alien Card, or I-551 Stamped

Adali, Tulay

317

Viewing Systems for Large Underground Storage Tanks.  

SciTech Connect (OSTI)

Specialized remote video systems have been successfully developed and deployed in a number of large radiological Underground Storage Tanks (USTs)that tolerate the hostile tank interior, while providing high resolution video to a remotely located operator. The deployment is through 100 mm (4 in) tank openings, while incorporating full video functions of the camera, lights, and zoom lens. The usage of remote video minimizes the potential for personnel exposure to radiological and hazardous conditions, and maximizes the quality of the visual data used to assess the interior conditions of both tank and contents. The robustness of this type of remote system has a direct effect on the potential for radiological exposure that personnel may encounter. The USTs typical of the Savannah River and Hanford Department Of Energy - (DOE) sites are typically 4.5 million liter (1.2 million gal) units under earth. or concrete overburden with limited openings to the surface. The interior is both highly contaminated and radioactive with a wide variety of nuclear processing waste material. Some of the tanks are -flammable rated -to Class 1, Division 1,and personnel presence at or near the openings should be minimized. The interior of these USTs must be assessed periodically as part of the ongoing management of the tanks and as a step towards tank remediation. The systems are unique in their deployment technology, which virtually eliminates the potential for entrapment in a tank, and their ability to withstand flammable environments. A multiplicity of components used within a common packaging allow for cost effective and appropriate levels of technology, with radiation hardened components on some units and lesser requirements on other units. All units are completely self contained for video, zoom lens, lighting, deployment,as well as being self purging, and modular in construction.

Heckendorn, F.M., Robinson, C.W., Anderson, E.K. [Westinghouse Savannah River Co., Aiken, SC (United States)], Pardini, A.F. [Westinghouse Hanford Co., Richland, WA (United States)

1996-12-31T23:59:59.000Z

318

Design Considerations for Large Mass Ultra-Low Background Experiments  

SciTech Connect (OSTI)

Summary The objective of this document is to present the designers of the next generation of large-mass, ultra-low background experiments with lessons learned and design strategies from previous experimental work. Design issues divided by topic into mechanical, thermal and electrical requirements are addressed. Large mass low-background experiments have been recognized by the scientific community as appropriate tools to aid in the refinement of the standard model. The design of these experiments is very costly and a rigorous engineering review is required for their success. The extreme conditions that the components of the experiment must withstand (heavy shielding, vacuum/pressure and temperature gradients), in combination with unprecedented noise levels, necessitate engineering guidance to support quality construction and safe operating conditions. Physical properties and analytical results of typical construction materials are presented. Design considerations for achieving ultra-low-noise data acquisition systems are addressed. Five large-mass, low-background conceptual designs for the one-tonne scale germanium experiment are proposed and analyzed. The result is a series of recommendations for future experiments engineering and for the Majorana simulation task group to evaluate the different design approaches.

Aguayo Navarrete, Estanislao; Reid, Douglas J.; Fast, James E.; Orrell, John L.

2011-07-01T23:59:59.000Z

319

Application of European Large Component Technology in the United States - 12561  

SciTech Connect (OSTI)

The European nuclear community currently has safer, more environmentally-friendly disposal options for large component disposal than the United States. The technology and innovation that makes these options viable will soon be available stateside. The removal and replacement of steam generators is a large and complicated task making volume reduction a vital service for the nuclear power industry. As plants age, the replacement of certain components is required in order to maintain plant efficiency and public safety. Currently in the United States, there are 3 options for the disposal of these items including: on-site storage, direct-disposal at a licensed (low-level radioactive waste) LLWR site, and volume reduction prior to disposal. If today's nuclear plants are to be used by future generations, waste stored on-site will eventually have to be disposed of to make room for newer, more advanced technology. Also, the space at LLWR disposal sites is finite, so all waste sent for disposal should be minimized whenever possible. Reducing the volume of decommissioned steam generators prior to final disposal shows the public that the nuclear industry is doing everything that it can to minimize its waste and conserve the environment. Additionally, many steam generators are massive and are not easily transported to a disposal site. When there is no practical transportation route, the size and weight of the component must be reduced. For various reasons including public safety, cost, and technical expertise, size reduction cannot be practically performed at the site of generation. However, since most facilities have some kind of access to a waterway, the components can be safely transported to another facility with barge access for size reduction. The size reduction process for steam generators has evolved over the past 5 years. Because of reductions to the amount of final waste, the dose to personnel, and the processing time, it is now an environmentally and economically friendly alternative to on-site storage and direct disposal. The major operations of this process include: - removal of the carbon steel steam generator dome; - removal of the channel head and majority of tube sheet to free the tubes from the tube sheet and gain access to all of the tubes for grit blasting; - grit blast decontamination of the steam generator tubes to allow disassembly; - removal of the U-Bend Section of the tubes to allow for tube pulling - tube pulling operations; - disassembly of the remainder of the steam generator shell and tube support assemblies; - size reduction of the steam generator resultant materials. All of the equipment for the American market is based on previous designs but has been adapted to meet the size requirements for processing of larger steam generators. This includes a large horizontal band saw, a tube pulling machine, tube blasting equipment, and a diamond wire saw frame. (authors)

Williams, Perry [Studsvik Processing Facility Memphis, Memphis, TN, 38113 (United States)

2012-07-01T23:59:59.000Z

320

WTP Calculation Sheet: Determining the LAW Glass Former Constituents and Amounts for G2 and Acm Models. 24590-LAW-M4C-LFP-00002, Rev. B  

SciTech Connect (OSTI)

The purpose of this calculation is to determine the LAW glass former recipe and additives with their respective amounts. The methodology and equations contained herein are to be used in the G2 and ACM models until better information is supplied by R&T efforts. This revision includes calculations that determines the mass and volume of the bulk chemicals/minerals needed per batch. Plus, it contains calculations (for the G2 model) to help prevent overflow in LAW Feed Preparation Vessel.

Gimpel, Rodney F.; Kruger, Albert A.

2013-12-16T23:59:59.000Z

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Large-Scale Renewable Energy Guide Webinar  

Broader source: Energy.gov [DOE]

Webinar introduces the “Large Scale Renewable Energy Guide." The webinar will provide an overview of this important FEMP guide, which describes FEMP's approach to large-scale renewable energy projects and provides guidance to Federal agencies and the private sector on how to develop a common process for large-scale renewable projects.

322

Conundrum of the Large Scale Streaming  

E-Print Network [OSTI]

The etiology of the large scale peculiar velocity (large scale streaming motion) of clusters would increasingly seem more tenuous, within the context of the gravitational instability hypothesis. Are there any alternative testable models possibly accounting for such large scale streaming of clusters?

T. M. Malm

1999-09-12T23:59:59.000Z

323

Notes Website Amount JUSTICE MAKERS  

E-Print Network [OSTI]

,000 MICROFINANCE Kiva Fellows Program http://www.kiva.org/fellows BIG IDEA SCHOLARSHIPS Dell Social innovation

Carter, John

324

Safety of magnetic fusion facilities: Requirements  

SciTech Connect (OSTI)

This Standard identifies safety requirements for magnetic fusion facilities. Safety functions are used to define outcomes that must be achieved to ensure that exposures to radiation, hazardous materials, or other hazards are maintained within acceptable limits. Requirements applicable to magnetic fusion facilities have been derived from Federal law, policy, and other documents. In addition to specific safety requirements, broad direction is given in the form of safety principles that are to be implemented and within which safety can be achieved.

NONE

1996-05-01T23:59:59.000Z

325

Nutrient Requirements of the Cow and Calf.  

E-Print Network [OSTI]

protein and minimum megacalories of digestible energy per pound of feed. The section on travel, fetal deaelopment and gain shows the quality of forage 'needed to furnish the energy and protetin for these activities. The section on milk production...NUTRIENT REQUIREMENTS of the Cow and Calf TEXAS A&M UNIVERSITY TEXAS AGRICULTURAL EXTENSION SERVICE, J. E. Hutchison, Director College Station, Texas I contents I-. Energy Requirements, 3 Protein Requirements, 8 Daily Nutrient...

Maddox, L. A. Jr.

1965-01-01T23:59:59.000Z

326

Core Science Requirement Final Document Page 1 THE CORE SCIENCE REQUIREMENT and  

E-Print Network [OSTI]

Core Science Requirement ­ Final Document ­ Page 1 THE CORE SCIENCE REQUIREMENT and MENDEL SCIENCE EXPERIENCE COURSES Core requirement of 2 semesters of science with laboratory; requirement to be met by the end of the sophomore year Rationale Science literacy is an integral part of the intellectual

Lagalante, Anthony F.

327

Committee Role Required/ Optional CSM faculty status Department Advisor Required Full time Home Department  

E-Print Network [OSTI]

Committee Role Required/ Optional CSM faculty status Department Advisor Required Full time Home faculty status Department Advisor Required Full time Home Dept* or familiar with area of study Co-Advisor to specify on form Full time-cannot be advisor or co-advisor Committee Role Required/ Optional CSM faculty

328

Allocating Variability and Reserve Requirements (Presentation)  

SciTech Connect (OSTI)

This presentation describes how you could conceivably allocate variability and reserve requirements, including how to allocate aggregation benefits. Conclusions of this presentation are: (1) Aggregation provides benefits because individual requirements are not 100% correlated; (2) Method needed to allocate reduced requirement among participants; (3) Differences between allocation results are subtle - (a) Not immediately obvious which method is 'better'; (b) Many are numerically 'correct', they sum to the physical requirement; (c) Many are not 'fair', Results depend on sub-aggregation and/or the order individuals are included; and (4) Vector allocation method is simple and fair.

Kirby, B.; King, J.; Milligan, M.

2011-10-01T23:59:59.000Z

329

Personnel Security - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2.2 Admin Chg 1, Personnel Security by Mark Pekrul Functional areas: Administrative Change, Personnel Security, Safety and Security The order establishes requirements that will...

330

Personnel Security - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

72.2 Chg 1, Personnel Security by Mark Pekrul Functional areas: Personnel Security, Security, Human Capital The order establishes requirements that will enable DOE to operate a...

331

Transmission Reassignment Reporting Requirement - April 2, 2014  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

CommitteesTeams Customer Training Interconnection Notices Rates Standards of Conduct Tariff TF Web Based Training Transmission Reassignment Reporting Requirement This notice...

332

Facility Safety - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Change, Safety, The order establishes facility and programmatic safety requirements for nuclear and explosives safety design criteria, fire protection, criticality safety,...

333

Automotive Turbocharging: Industrial Requirements and Technology...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

performance will be difficult to achieve requires a proper understanding of the trade-offs and engine effects and impacts must be part of turbocharger development...

334

Federal / State Legislative & Regulatory Changes Required for...  

Energy Savers [EERE]

Issues Federal and State Blending Restrictions Action by ASTM NCWM to address higher ethanol blends Federal State Legislative & Regulatory Changes Required for Introduction of...

335

FEMINIST STUDIES MAJOR REQUIREMENTS Name _______________________________________ Email_____________________  

E-Print Network [OSTI]

of intended graduation ____________________ Feminist Studies students must complete 11 courses within year) FMST 195 (required for Thesis or Project) Indicate topic: 9/17/12 #12;

California at Santa Cruz, University of

336

Contact Form - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Contact Form by Diane Johnson Directives are the Department of Energy's Primary means of establishing policies, requirements, responsibilities, and procedures for Departmental...

337

Requirements Governing Water Quality Standards (West Virginia)  

Broader source: Energy.gov [DOE]

This rule establishes the requirements governing the discharge or deposit of sewage, industrial wastes and other wastes into waters and establishes water quality standards.

338

The Schedule - DOE Directives, Delegations, and Requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

funds are required. This chapter will briefly discuss some scheduling basics. g4301-1chp12.pdf -- PDF Document, 60 KB Writer: John Makepeace Subjects: Administration Management...

339

Supervisory Training Requirements | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Requirements The Office of Learning and Workforce Development has developed an inventory of training and developmental activities that will meet the supervisory training...

340

The Access Almanac: Solar Parking Requirements  

E-Print Network [OSTI]

these requirements. Solar panels in parking lots will startto install solar panels on their parking lots the option tosupport solar panels. Therefore, parking lots will generate

Shoup, Donald

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

DOE Office of Science Exascale Requirements Reviews  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2020-2025 The three DOE Office of Advanced Scientific Computing (ASCR) High Performance Computing (HPC) Facilities are conducting a series of six Exascale Requirements...

342

Cooperating Agencies in Implementing the Procedural Requirements...  

Energy Savers [EERE]

of Federal and non-federal cooperating agencies in the preparation of analyses and documentation required by the National Environmental Policy Act (NEPA), and to ensure that...

343

Documentation Requirements for Pressurized Experiment Equipment  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Documentation Requirements for Pressurized Experiment Apparatus PSSC NOTE01 15-Jan-2013 When bringing a piece of apparatus to the APS for an experiment that will involve pressure,...

344

Multiband Tunable Large Area Hot Carrier Plasmonic-Crystal Photodetectors  

E-Print Network [OSTI]

Optoelectronic functionalities of photodection and light harnessing rely on the band-to-band excitation of semiconductors, thus the spectral response of the devices is dictated and limited by their bandgap. A novel approach, free from this restriction, is to harvest the energetic electrons generated by the relaxation of a plasmonic resonance in the vicinity of a metal-semiconductor junction. In this configuration, the optoelectronic and spectral response of the detectors can be designed ad hoc just by tailoring the topology of metal structures, which has tremendous applications in solar energy harvesting and photodetection. Fully exploiting hot electron based optoelectronics yet requires a platform that combines their exotic spectral capabilities with large scale manufacturing and high performance. Herein we report the first implementation of a large area, low cost quasi 3D plasmonic crystal (PC) for hot electron photodetection, showcasing multiband selectivity in the VIS-NIR and unprecedented responsivity of...

de Arquer, F Pelayo García; Konstantatos, Gerasimos

2014-01-01T23:59:59.000Z

345

The liquid helium storage system for the Large Hadron Collider.  

E-Print Network [OSTI]

The cryogenic system of the Large Hadron Collider (LHC) under operation at CERN has a total helium inventory of 140 t. Up to 50 t can be stored in gas storage tanks. The remaining inventory will be stored in a liquid helium storage system consisting of six 15-t liquid helium tanks in 4 locations. The two liquid helium tanks of specific low heat inleak design and the required infrastructure of the first location were recently commissioned. Four additional tanks shall be operational end 2010. The paper describes the features and characteristics of the liquid helium storage system and presents the measurement of the thermal performance of the two first tanks.

Benda, V; Fathallah, M; Goiffon, T; Parente, C; Perez-Duenas, E; Perret, Ph; Pirotte, O; Serio, L; Vullierme, B

2011-01-01T23:59:59.000Z

346

Dark Radiation predictions from general Large Volume Scenarios  

E-Print Network [OSTI]

Recent observations constrain the amount of Dark Radiation ($\\Delta N_{\\rm eff}$) and may even hint towards a non-zero value of $\\Delta N_{\\rm eff}$. It is by now well-known that this puts stringent constraints on the sequestered Large Volume Scenario (LVS), i.e. on LVS realisations with the Standard Model at a singularity. We go beyond this setting by considering LVS models where SM fields are realised on 7-branes in the geometric regime. As we argue, this naturally goes together with high-scale supersymmetry. The abundance of Dark Radiation is determined by the competition between the decay of the lightest modulus to axions, to the SM Higgs and to gauge fields. The latter decay channel avoids the most stringent constraints of the sequestered setting. Nevertheless, a rather robust prediction for a substantial amount of Dark Radiation can be made. This applies both to cases where the SM 4-cycles are stabilised by D-terms and are small "by accident" as well as to fibred models with the small cycles stabilised by loops. Furthermore, we analyse a closely related setting where the SM lives at a singularity but couples to the volume modulus through flavour branes. We conclude that some of the most natural LVS settings with natural values of model parameters lead to Dark Radiation predictions just below the present observational limits. Barring a discovery, rather modest improvements of present Dark Radiation bounds can rule out many of these most simple and generic variants of the LVS.

Arthur Hebecker; Patrick Mangat; Fabrizio Rompineve; Lukas T. Witkowski

2014-05-05T23:59:59.000Z

347

Environmentally Safe, Large Volume Utilization Applications for Gasification Byproducts  

SciTech Connect (OSTI)

Samples of gasification by-products produced at Polk Station and Eastman Chemical were obtained and characterized. Bulk samples were prepared for utilization studies by screening at the appropriate size fractions where char and vitreous frit distinctly partitioned. Vitreous frit was concentrated in the +20 mesh fraction while char predominated in the -20+100 mesh fraction. The vitreous frit component derived from each gasifier slag source was evaluated for use as a pozzolan and as aggregate. Pozzolan testing required grinding the frit to very fine sizes which required a minimum of 60 kwhr/ton. Grinding studies showed that the energy requirement for grinding the Polk slag were slightly higher than for the Eastman slag. Fine-ground slag from both gasifiers showed pozzoalnic activity in mortar cube testing and met the ASTM C618 strength requirements after only 3 days. Pozzolanic activity was further examined using British Standard 196-5, and results suggest that the Polk slag was more reactive than the Eastman slag. Neither aggregate showed significant potential for undergoing alkali-silica reactions when used as concrete aggregate with ASTM test method 1260. Testing was conducted to evaluate the use of the frit product as a component of cement kiln feed. The clinker produced was comprised primarily of the desirable components Ca{sub 3}SiO{sub 5} and Ca{sub 2}SiO{sub 4} after raw ingredient proportions were adjusted to reduce the amount of free lime present in the clinker. A mobile processing plant was designed to produce 100 tons of carbon from the Eastman slag to conduct evaluations for use as recycle fuel. The processing plant was mounted on a trailer and hauled to the site for use. Two product stockpiles were generated; the frit stockpile contained 5% LOI while the carbon stockpile contained 62% LOI. The products were used to conduct recycle fuel tests. A processing plant was designed to separate the slag produced at Eastman into 3 usable products. The coarse frit has been shown to be suitable for use as clinker feed for producing Portland cement. The intermediate-size product is enriched in carbon (58-62% C) and may be used as recycle fuel either in the gasifier or in a PC boiler. The fines product contains 30-40% C and may also be used as a recycle gasifier fuel, as is presently done at TECO's Polk Station, however, due to gasifier operating requirements for the production of syngas, this is not feasible at Eastman.

J.G. Groppo; R. Rathbone

2008-06-30T23:59:59.000Z

348

EARTH SCIENCES Lower-Division Requirements  

E-Print Network [OSTI]

2012-2013 EARTH SCIENCES Lower-Division Requirements Math 20A_____ 20B_____ 20C_____ 20D (BILD 3) _____ SIO 50* _____ Group A: Earth Science Upper-Division Core Requirements (all courses _____ Introduction to Geophysics SIO 104 _____ Paleobiology and History of Life* Group B: Upper-Division Earth

Constable, Steve

349

Data Modelling and Database Requirements Geographical Data  

E-Print Network [OSTI]

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Brief history 15 Definitions 15 The three-schema architecture 16 Features/services of databaseData Modelling and Database Requirements for Geographical Data HĂĄvard Tveite January, 1997 #12-Model Substitution, and adds new symbology that is relevant for geographical data. Database system requirements

350

Contracting Requirements and Why They Matter  

E-Print Network [OSTI]

Contracting Requirements and Why They Matter Presented by David E. Broome, Jr., General Counsel Amy's legally binding #12;Getting It Wrong · Case: Your unit contracts with Fun Corp (FC) to provide Student Fun Fair on campus. Contract requires that University indemnify FC for injuries/damage/liability arising

Howitt, Ivan

351

Modelling the Contribution Structure Underlying Requirements  

E-Print Network [OSTI]

Modelling the Contribution Structure Underlying Requirements Orlena C. Z. Gotel & Anthony C, and hence trace, those who have contributed in the production and refinement of the requirements illustrate the relationship between RT and software quality. In Section 3, we show the restricted impact

Gotel, Olly

352

BIOLOGY MINOR WORKSHEET REQUIRED BIOLOGY COURSES  

E-Print Network [OSTI]

BIOLOGY MINOR WORKSHEET 2008-2013 REQUIRED BIOLOGY COURSES: BIOL 115N General Biology I 4 ________ BIOL 116N General Biology II 4 ________ Upon completion of BIOL 115N and BIOL 116N, the Biology Minor requires the successful completion of a minimum of 12 credit-hours of Biology coursework at the advanced

353

What is required for a Philosophy Major?  

E-Print Network [OSTI]

PHILOSOPHY What is required for a Philosophy Major? at Northern Kentucky University For students who entered the University in 2011. The major in philosophy requires a total of at least thirty (30/PHI 280 Classical and Medieval Philosophy (fall) · PHI 355 Socrates and Plato (spring 2014) History II

Acosta, Charles A.

354

What is required for a Philosophy Major?  

E-Print Network [OSTI]

PHILOSOPHY What is required for a Philosophy Major? at Northern Kentucky University For students who entered the University before 2011. The major in philosophy requires a total of at least thirty or PHI 265 Logic (every semester) · PHI 180 or PHI 280 Classical and Medieval Philosophy (fall) · PHI 185

Acosta, Charles A.

355

What is required for a Philosophy Major?  

E-Print Network [OSTI]

PHILOSOPHY What is required for a Philosophy Major? at Northern Kentucky University For students who entered the University in 2012. The major in philosophy requires a total of at least thirty (30) · PHI 280 Classical and Medieval Philosophy (offered fall) · PHI 285 Modern and Contemporary Philosophy

Acosta, Charles A.

356

What is required for a Philosophy Major?  

E-Print Network [OSTI]

PHILOSOPHY What is required for a Philosophy Major? at Northern Kentucky University For students who entered the University in (or after) 2013. The major in philosophy requires a total of at least (every semester) · PHI 280 Classical and Medieval Philosophy (offered fall) · PHI 285 Modern

Acosta, Charles A.

357

Requirements, possible alternatives & international NEUTRON SCATTERING  

E-Print Network [OSTI]

Requirements, possible alternatives & international NEUTRON SCATTERING DETECTORS for Rob Dimeo NIST neutron scattering instruments are the most demanding require background low #12;#12;The Helium-3 Supply Crisis ­ Alternative Techniques to Helium-3 based Detectors for Neutron Scattering Applications

Dimeo, Robert M.

358

MONITORED GEOLOGIC REPOSITORY SYSTEMS REQUIREMENTS DOCUMENT  

SciTech Connect (OSTI)

This document establishes the Monitored Geologic Repository system requirements for the U.S. Department of Energy's (DOE's) Civilian Radioactive Waste Management System (CRWMS). These requirements are based on the ''Civilian Radioactive Waste Management System Requirements Document'' (CRD) (DOE 2004a). The ''Monitored Geologic Repository Systems Requirements Document'' (MGR-RD) is developed in accordance with LP-3.3 SQ-OCRWM, ''Preparation, Review, and Approval of Office of Repository Development Requirements Document''. As illustrated in Figure 1, the MGR-RD forms part of the DOE Office of Civilian Radioactive Waste Management Technical Requirements Baseline. Revision 0 of this document identifies requirements for the current phase of repository design that is focused on developing a preliminary design for the repository and will be included in the license application submitted to the U.S. Nuclear Regulatory Commission for a repository at Yucca Mountain in support of receiving a construction authorization and subsequent operating license. As additional information becomes available, more detailed requirements will be identified in subsequent revisions to this document.

V. Trebules

2006-06-02T23:59:59.000Z

359

Ongoing Software Development without Classical Requirements  

E-Print Network [OSTI]

systems without overt requirements artifacts or processes, contrary to expectations resulting from are evolved and sustained in this way yet provide quality and rich functional capabilities to users In 2002 one of us (Scacchi) published a study of require- ments practices and artifacts in four open

Scacchi, Walt

360

Conduct of Operations Requirements for DOE Facilities  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

"To provide requirements and guidelines for Departmental Elements, including the National Nuclear Security Administration (NNSA), to use in developing directives, plans, and/or procedures relating to the conduct of operations at DOE facilities. The implementation of these requirements and guidelines should result in improved quality and uniformity of operations. Change 2, 10-23-2001. Canceled by DOE O 422.1.

1990-07-09T23:59:59.000Z

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Induced-charge electrokinetics at large voltages  

E-Print Network [OSTI]

The classical transport theory cannot explain the experimental behavior of electrochemical systems in the extreme operating conditions required by modern microfluidics devices. Some experimental puzzles include strange ...

Kilic, Mustafa Sabri

2008-01-01T23:59:59.000Z

362

Large-eddy simulations of scramjet engines.  

E-Print Network [OSTI]

??The main objective of this dissertation is to develop large-eddy simulation (LES) based computational tools for supersonic inlet and combustor design. In the recent past,… (more)

Koo, Heeseok

2011-01-01T23:59:59.000Z

363

A Database Index to Large Biological Sequences  

E-Print Network [OSTI]

Hunt,E. Atkinson,M.P. Irving,R.W. Proceedings of the 27th Conference on Very Large Databases pp 139-148 Morgan Kaufmann

Hunt, E.

364

Idaho Power- Large Commercial Custom Efficiency Program  

Broader source: Energy.gov [DOE]

Large commercial and industrial Idaho Power customers that reduce energy usage through more efficient electrical commercial and industrial processes may qualify for an incentive that is the lesser...

365

Determination of Large-Scale Cloud Ice Water Concentration by Combining Surface Radar and Satellite Data in Support of ARM SCM Activities  

SciTech Connect (OSTI)

Single-column modeling (SCM) is one of the key elements of Atmospheric Radiation Measurement (ARM) research initiatives for the development and testing of various physical parameterizations to be used in general circulation models (GCMs). The data required for use with an SCM include observed vertical profiles of temperature, water vapor, and condensed water, as well as the large-scale vertical motion and tendencies of temperature, water vapor, and condensed water due to horizontal advection. Surface-based measurements operated at ARM sites and upper-air sounding networks supply most of the required variables for model inputs, but do not provide the horizontal advection term of condensed water. Since surface cloud radar and microwave radiometer observations at ARM sites are single-point measurements, they can provide the amount of condensed water at the location of observation sites, but not a horizontal distribution of condensed water contents. Consequently, observational data for the large-scale advection tendencies of condensed water have not been available to the ARM cloud modeling community based on surface observations alone. This lack of advection data of water condensate could cause large uncertainties in SCM simulations. Additionally, to evaluate GCMsâ�� cloud physical parameterization, we need to compare GCM results with observed cloud water amounts over a scale that is large enough to be comparable to what a GCM grid represents. To this end, the point-measurements at ARM surface sites are again not adequate. Therefore, cloud water observations over a large area are needed. The main goal of this project is to retrieve ice water contents over an area of 10 x 10 deg. surrounding the ARM sites by combining surface and satellite observations. Built on the progress made during previous ARM research, we have conducted the retrievals of 3-dimensional ice water content by combining surface radar/radiometer and satellite measurements, and have produced 3-D cloud ice water contents in support of cloud modeling activities. The approach of the study is to expand a (surface) point measurement to an (satellite) area measurement. That is, the study takes the advantage of the high quality cloud measurements (particularly cloud radar and microwave radiometer measurements) at the point of the ARM sites. We use the cloud ice water characteristics derived from the point measurement to guide/constrain a satellite retrieval algorithm, then use the satellite algorithm to derive the 3-D cloud ice water distributions within an 10�° (latitude) x 10�° (longitude) area. During the research period, we have developed, validated and improved our cloud ice water retrievals, and have produced and archived at ARM website as a PI-product of the 3-D cloud ice water contents using combined satellite high-frequency microwave and surface radar observations for SGP March 2000 IOP and TWP-ICE 2006 IOP over 10 deg. x 10 deg. area centered at ARM SGP central facility and Darwin sites. We have also worked on validation of the 3-D ice water product by CloudSat data, synergy with visible/infrared cloud ice water retrievals for better results at low ice water conditions, and created a long-term (several years) of ice water climatology in 10 x 10 deg. area of ARM SGP and TWP sites and then compared it with GCMs.

Liu, Guosheng

2013-03-15T23:59:59.000Z

366

Duct thermal performance models for large commercial buildings  

SciTech Connect (OSTI)

Despite the potential for significant energy savings by reducing duct leakage or other thermal losses from duct systems in large commercial buildings, California Title 24 has no provisions to credit energy-efficient duct systems in these buildings. A substantial reason is the lack of readily available simulation tools to demonstrate the energy-saving benefits associated with efficient duct systems in large commercial buildings. The overall goal of the Efficient Distribution Systems (EDS) project within the PIER High Performance Commercial Building Systems Program is to bridge the gaps in current duct thermal performance modeling capabilities, and to expand our understanding of duct thermal performance in California large commercial buildings. As steps toward this goal, our strategy in the EDS project involves two parts: (1) developing a whole-building energy simulation approach for analyzing duct thermal performance in large commercial buildings, and (2) using the tool to identify the energy impacts of duct leakage in California large commercial buildings, in support of future recommendations to address duct performance in the Title 24 Energy Efficiency Standards for Nonresidential Buildings. The specific technical objectives for the EDS project were to: (1) Identify a near-term whole-building energy simulation approach that can be used in the impacts analysis task of this project (see Objective 3), with little or no modification. A secondary objective is to recommend how to proceed with long-term development of an improved compliance tool for Title 24 that addresses duct thermal performance. (2) Develop an Alternative Calculation Method (ACM) change proposal to include a new metric for thermal distribution system efficiency in the reporting requirements for the 2005 Title 24 Standards. The metric will facilitate future comparisons of different system types using a common ''yardstick''. (3) Using the selected near-term simulation approach, assess the impacts of duct system improvements in California large commercial buildings, over a range of building vintages and climates. This assessment will provide a solid foundation for future efforts that address the energy efficiency of large commercial duct systems in Title 24. This report describes our work to address Objective 1, which includes a review of past modeling efforts related to duct thermal performance, and recommends near- and long-term modeling approaches for analyzing duct thermal performance in large commercial buildings.

Wray, Craig P.

2003-10-01T23:59:59.000Z

367

270 | VOL.9 NO.3 | MARCH2012 | nature methods Key requirements for methylation analysis of large sample sizes  

E-Print Network [OSTI]

). This method eliminates five steps from Illumina's library- construction protocol such that multiplexed and sequenced all at once in a single Illumina HiSeq flowcell. Additionally we designed barcodes to process 384 an analysis pipeline for read mapping and methylation quantification, called bisReadMapper (Supplementary Fig

Cai, Long

368

QCD Thermodynamics at High Temperature Peter Petreczky Large Scale Computing and Storage Requirements for Nuclear Physics (NP),  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedlesAdvancedJanuary 13,Putting veterans to8 (ReleasedQA/QCQCD

369

Evaluation of Roof Bolting Requirements Based on In-Mine Roof Bolter Drilling  

SciTech Connect (OSTI)

Roof bolting is the most popular method for underground openings in the mining industry, especially in the bedded deposits such as coal. In fact, all U.S. underground coal mine entries are roof-bolted as required by law. However, roof falls still occur frequently in the roof bolted entries. The two possible reasons are: the lack of knowledge of and technology to detect the roof geological conditions in advance of mining, and lack of roof bolting design criteria for modern roof bolting systems. This research is to develop a method for predicting the roof geology and stability condition in real time during roof bolting operation. Based on this information, roof bolting design criteria for modern roof bolting systems will be developed for implementation in real time. For the prediction of roof geology and stability condition in real time, a micro processor was used and a program developed to monitor and record the drilling parameters of roof bolter. These parameters include feed pressure, feed flow (penetration rate), rotation pressure, rotation rate, vacuum pressure, oil temperature of hydraulic circuit, and signals for controlling machine. From the results of a series of laboratory and underground tests so far, feed pressure is found to be a good indicator for identifying the voids/fractures and estimating the roof rock strength. The method for determining quantitatively the location and the size of void/fracture and estimating the roof rock strength from the drilling parameters of roof bolter was developed. Also, a set of computational rules has been developed for in-mine roof using measured roof drilling parameters and implemented in MRGIS (Mine Roof Geology Information System), a software package developed to allow mine engineers to make use of the large amount of roof drilling parameters for predicting roof geology properties automatically. For the development of roof bolting criteria, finite element models were developed for tensioned and fully grouted bolting designs. Numerical simulations were performed to investigate the mechanisms of modern roof bolting systems including both the tension and fully grouted bolts. Parameters to be studied are: bolt length, bolt spacing, bolt size/strength, grout annulus, in-situ stress condition, overburden depth, and roof geology (massive strata, fractured, and laminated or thinly-bedded). Based on the analysis of the mechanisms of both bolting systems and failure modes of the bolted strata, roof bolting design criteria and programs for modern roof bolting systems were developed. These criterion and/or programs were combined with the MRGIS for use in conjunction with roof bolt installation.

Syd S. Peng

2005-10-01T23:59:59.000Z

370

Scientific Application Requirements for Leadership Computing at the Exascale  

SciTech Connect (OSTI)

The Department of Energy s Leadership Computing Facility, located at Oak Ridge National Laboratory s National Center for Computational Sciences, recently polled scientific teams that had large allocations at the center in 2007, asking them to identify computational science requirements for future exascale systems (capable of an exaflop, or 1018 floating point operations per second). These requirements are necessarily speculative, since an exascale system will not be realized until the 2015 2020 timeframe, and are expressed where possible relative to a recent petascale requirements analysis of similar science applications [1]. Our initial findings, which beg further data collection, validation, and analysis, did in fact align with many of our expectations and existing petascale requirements, yet they also contained some surprises, complete with new challenges and opportunities. First and foremost, the breadth and depth of science prospects and benefits on an exascale computing system are striking. Without a doubt, they justify a large investment, even with its inherent risks. The possibilities for return on investment (by any measure) are too large to let us ignore this opportunity. The software opportunities and challenges are enormous. In fact, as one notable computational scientist put it, the scale of questions being asked at the exascale is tremendous and the hardware has gotten way ahead of the software. We are in grave danger of failing because of a software crisis unless concerted investments and coordinating activities are undertaken to reduce and close this hardwaresoftware gap over the next decade. Key to success will be a rigorous requirement for natural mapping of algorithms to hardware in a way that complements (rather than competes with) compilers and runtime systems. The level of abstraction must be raised, and more attention must be paid to functionalities and capabilities that incorporate intent into data structures, are aware of memory hierarchy, possess fault tolerance, exploit asynchronism, and are power-consumption aware. On the other hand, we must also provide application scientists with the ability to develop software without having to become experts in the computer science components. Numerical algorithms are scattered broadly across science domains, with no one particular algorithm being ubiquitous and no one algorithm going unused. Structured grids and dense linear algebra continue to dominate, but other algorithm categories will become more common. A significant increase is projected for Monte Carlo algorithms, unstructured grids, sparse linear algebra, and particle methods, and a relative decrease foreseen in fast Fourier transforms. These projections reflect the expectation of much higher architecture concurrency and the resulting need for very high scalability. The new algorithm categories that application scientists expect to be increasingly important in the next decade include adaptive mesh refinement, implicit nonlinear systems, data assimilation, agent-based methods, parameter continuation, and optimization. The attributes of leadership computing systems expected to increase most in priority over the next decade are (in order of importance) interconnect bandwidth, memory bandwidth, mean time to interrupt, memory latency, and interconnect latency. The attributes expected to decrease most in relative priority are disk latency, archival storage capacity, disk bandwidth, wide area network bandwidth, and local storage capacity. These choices by application developers reflect the expected needs of applications or the expected reality of available hardware. One interpretation is that the increasing priorities reflect the desire to increase computational efficiency to take advantage of increasing peak flops [floating point operations per second], while the decreasing priorities reflect the expectation that computational efficiency will not increase. Per-core requirements appear to be relatively static, while aggregate requirements will grow with the system. This projection is consistent with a r

Ahern, Sean [ORNL; Alam, Sadaf R [ORNL; Fahey, Mark R [ORNL; Hartman-Baker, Rebecca J [ORNL; Barrett, Richard F [ORNL; Kendall, Ricky A [ORNL; Kothe, Douglas B [ORNL; Mills, Richard T [ORNL; Sankaran, Ramanan [ORNL; Tharrington, Arnold N [ORNL; White III, James B [ORNL

2007-12-01T23:59:59.000Z

371

A study of the point reactor dynamics equations as applied to large nuclear excursions  

E-Print Network [OSTI]

A STUDY OF THE POINT REACTOR DYNAMICS EQUATIONS AS APPLIED TO LARGE NUCLEAR EXCURSIONS A Thesis By ROBERT TERRELL PERRY, JR, Submitted to the Graduate College of the Texas ARM University xn partial fulfillment of the requirements i...' or the degree of MASTER OF SCIENCE May, 1967 Major Subject: Nuclear Engineering A STUDY OF THE POINT REACTOR DYNAMICS EQUATIONS AS APPLIED TO LARGE NUCLEAR EXCURSIONS A Thesis By ROBERT TERRELL PERRY, JR. Approved as to style and content by...

Perry, Robert Terrell

1967-01-01T23:59:59.000Z

372

Turbulence prediction in two- and three-dimensional bundle flows using Large Eddy Simulation  

E-Print Network [OSTI]

TURBULENCE PREDICTION IN TWO- AND THREE-DIMENSIONAL BUNDLE FLOWS USING LARGE EDDY SIMULATION A Thesis by WAEL ABDUL-HAMID IBRAHIM Submitted to Texas A&M University in partial fulfillment of the requirements for the degree of MASTER... Prediction in Two- and Three-Dimensional Bundle Flows Using Large Eddy Simulation. (May 1994) Wael Abdul-Hamid Ibrahim, B. S. Alexandria University Chair of Advisory Committee: Dr. Yassin A. Hassan Flow turbulence is a familiar phenomenon in everyday life...

Ibrahim, Wael Abdul-Hamid

1994-01-01T23:59:59.000Z

373

Numerical simulation of large amplitude liquid sloshing in a rigid rectangular tank  

E-Print Network [OSTI]

NUMERICAL SIMULATION OF LARGE AMPLITUDE LIQUID SLOSHING IN A RIGID RECTANGULAR TANK A Thesis by THOMAS JACKSON BRIDGES Submitted to the Graduate College of Texas A8M University in partial fulfillment of the requirement for the degree... of MASTER OF SCIE'ICE December 1981 Major Subject: Ocean Engineering NUMERICAL SIMULATION OF LARGE AMPLITUDE LIQUID SLOSHING IN A RIGID RECTANGULAR TANK A Thesis by THOMAS JACKSON BRIDGES Approved as to sty1e and content by: (Chairman of Commit ee...

Bridges, Thomas J.

1981-01-01T23:59:59.000Z

374

Specification of advanced safety modeling requirements (Rev. 0).  

SciTech Connect (OSTI)

The U.S. Department of Energy's Global Nuclear Energy Partnership has lead to renewed interest in liquid-metal-cooled fast reactors for the purpose of closing the nuclear fuel cycle and making more efficient use of future repository capacity. However, the U.S. has not designed or constructed a fast reactor in nearly 30 years. Accurate, high-fidelity, whole-plant dynamics safety simulations will play a crucial role by providing confidence that component and system designs will satisfy established design limits and safety margins under a wide variety of operational, design basis, and beyond design basis transient conditions. Current modeling capabilities for fast reactor safety analyses have resulted from several hundred person-years of code development effort supported by experimental validation. The broad spectrum of mechanistic and phenomenological models that have been developed represent an enormous amount of institutional knowledge that needs to be maintained. Complicating this, the existing code architectures for safety modeling evolved from programming practices of the 1970s. This has lead to monolithic applications with interdependent data models which require significant knowledge of the complexities of the entire code in order for each component to be maintained. In order to develop an advanced fast reactor safety modeling capability, the limitations of the existing code architecture must be overcome while preserving the capabilities that already exist. To accomplish this, a set of advanced safety modeling requirements is defined, based on modern programming practices, that focuses on modular development within a flexible coupling framework. An approach for integrating the existing capabilities of the SAS4A/SASSYS-1 fast reactor safety analysis code into the SHARP framework is provided in order to preserve existing capabilities while providing a smooth transition to advanced modeling capabilities. In doing this, the advanced fast reactor safety models will target leadership-class computing architectures for massively-parallel high-fidelity computations while providing continued support for rapid prototyping using modest fidelity computations on multiple-core desktop platforms.

Fanning, T. H.; Tautges, T. J.

2008-06-30T23:59:59.000Z

375

Quality Assurance Source Requirements Traceability Database  

SciTech Connect (OSTI)

At the Yucca Mountain Project the Project Requirements Processing System assists in the management of relationships between regulatory and national/industry standards source criteria, and Quality Assurance Requirements and Description document (DOE/R W-0333P) requirements to create compliance matrices representing respective relationships. The matrices are submitted to the U.S. Nuclear Regulatory Commission to assist in the commission's review, interpretation, and concurrence with the Yucca Mountain Project QA program document. The tool is highly customized to meet the needs of the Office of Civilian Radioactive Waste Management Office of Quality Assurance.

MURTHY, R., NAYDENOVA, A., DEKLEVER, R., BOONE, A.

2006-01-30T23:59:59.000Z

376

Data requirements and acquisition for reservoir characterization  

SciTech Connect (OSTI)

This report outlines the types of data, data sources and measurement tools required for effective reservoir characterization, the data required for specific enhanced oil recovery (EOR) processes, and a discussion on the determination of the optimum data density for reservoir characterization and reservoir modeling. The two basic sources of data for reservoir characterization are data from the specific reservoir and data from analog reservoirs, outcrops, and modern environments. Reservoir data can be divided into three broad categories: (1) rock properties (the container) and (2) fluid properties (the contents) and (3)interaction between reservoir rock and fluid. Both static and dynamic measurements are required.

Jackson, S.; Chang, Ming Ming; Tham, Min.

1993-03-01T23:59:59.000Z

377

Sustainability of Large Photovoltaic Deployment: Environmental Research  

E-Print Network [OSTI]

Sustainability of Large Photovoltaic Deployment: Environmental Research Sustainability of Large Photovoltaic Deployment: Environmental ResearchEnvironmental ResearchEnvironmental Research Vasilis Fthenakis, Cu, Fe) CdSO4 Cd Metal Tellurium Clean Glass Cd Electrowinning Cell Cu Recovery Te Separation from Cd

Homes, Christopher C.

378

Microfluidic Large-Scale Integration: The Evolution  

E-Print Network [OSTI]

Microfluidic Large-Scale Integration: The Evolution of Design Rules for Biological Automation, polydimethylsiloxane Abstract Microfluidic large-scale integration (mLSI) refers to the develop- ment of microfluidic, are discussed. Several microfluidic components used as building blocks to create effective, complex, and highly

Quake, Stephen R.

379

Large-Scale in the United  

E-Print Network [OSTI]

Large-Scale Offshore Wind Power in the United States ASSESSMENT OF OPPORTUNITIES AND BARRIERS, including 10% post consumer waste. #12;Large-Scale Offshore Wind Power in the United States ASSESSMENT Energy, Office of Wind and Water Power Technologies for their financial and technical support

380

Identifying Requirements for Effective Human-Automation Teamwork  

SciTech Connect (OSTI)

Previous studies have shown that poorly designed human-automation collaboration, such as poorly designed communication protocols, often leads to problems for the human operators, such as: lack of vigilance, complacency, and loss of skills. These problems often lead to suboptimal system performance. To address this situation, a considerable amount of research has been conducted to improve human-automation collaboration and to make automation function better as a “team player.” Much of this research is based on an understanding of what it means to be a good team player from the perspective of a human team. However, the research is often based on a simplified view of human teams and teamwork. In this study, we sought to better understand the capabilities and limitations of automation from the standpoint of human teams. We first examined human teams to identify the principles for effective teamwork. We next reviewed the research on integrating automation agents and human agents into mixed agent teams to identify the limitations of automation agents to conform to teamwork principles. This research resulted in insights that can lead to more effective human-automation collaboration by enabling a more realistic set of requirements to be developed based on the strengths and limitations of all agents.

Jeffrey C. Joe; John O'Hara; Heather D. Medema; Johanna H. Oxstrand

2014-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Energy Efficiency Requirements for State Government  

Broader source: Energy.gov [DOE]

Public Act No. 06-187, enacted in 2006, required the Connecticut Office of Policy and Management, in consultation with several other state agencies, to adopt building construction regulations for...

382

Development Requirements for Advanced Industrial Heat Pumps  

E-Print Network [OSTI]

DOE is attempting to advance the use of heat pumps to save energy in industrial processes. The approach has emphasized developing better heat pump technology and transferring that technology to the private sector. DOE requires that heat pump...

Chappell, R. N.; Priebe, S. J.; Bliem, C. J.; Mills, J. I.

383

NERSC/DOE BER Requirements Workshop Presentations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Christopher Kerr | Global Cloud Resolving Model May 7, 2009 | Author(s): David Randall | IO Requirements for a Global Cloud Resolving Model May 7, 2009 | Author(s): Bruce...

384

Microsoft Word - Net Requirements Transparency Process_09302014  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

4 As part of its Net Requirements Transparency process, on July 31, 2014 BPA published the SliceBlock and Block customers' FY2013 and forecast FY2015 Total Retail Load (TRL) and...

385

Cook County- LEED Requirements for County Buildings  

Broader source: Energy.gov [DOE]

In 2002, Cook County enacted an ordinance requiring all new county buildings and all retrofitted county buildings to be built to LEED standards. Specifically, all newly constructed buildings and...

386

Harris County- LEED Requirement for County Buildings  

Broader source: Energy.gov [DOE]

In 2009, the Harris County Commissioners Court approved a measure that requires all new county buildings to meet minimum LEED certification standards. Buildings do not have to register with the the...

387

Microsoft Word - Directives Requiring Additional Documentation...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Chg 2 Radiation Protection of the Public and the Environment 24 DOE O 5480.19, Chg 2 Conduct of Operations Requirements for DOE Facilities 25 DOE O 5480.20A, Chg 1 Personnel...

388

Energy Efficiency and Conservation Requirements for Utilities  

Broader source: Energy.gov [DOE]

In October 2008 Pennsylvania adopted Act 129, creating energy efficiency and conservation requirements for the state’s investor owned utilities with at least 100,000 customers. With this limitation...

389

San Bernardino County- Green Building Requirement  

Broader source: Energy.gov [DOE]

In August 2007, the San Bernardino County Board of Supervisors approved a policy requiring that all new county buildings and major renovations be built to LEED Silver standards. The decision was...

390

CERTIFICATION REQUIREMENTS IN THE CALIFORNIA ENERGY COMMISSION'S  

E-Print Network [OSTI]

CALIFORNIA ENERGY COMMISSION CERTIFICATION REQUIREMENTS IN THE CALIFORNIA ENERGY COMMISSION'S APPLIANCE REGULATIONS: A Summary Guide, Including Forms for Manufacturers, Trade Associations, and Other ...............................................................................................................1 III. Where to Find the Energy Commission Appliance Efficiency Regulations .....2 IV. Where to Get

391

Requirements & Status for Volume Fuel Cell Manufacturing  

E-Print Network [OSTI]

Requirements & Status for Volume Fuel Cell Manufacturing DOE Hydrogen Program, Washington, DC July ­Eliminate components, parts and process steps ­Standardize core components across products ­Standardize non-core

392

Technical requirements specification for tank waste retrieval  

SciTech Connect (OSTI)

This document provides the technical requirements specification for the retrieval of waste from the underground storage tanks at the Hanford Site. All activities covered by this scope are conducted in support of the Tank Waste Remediation System (TWRS) mission.

Lamberd, D.L.

1996-09-26T23:59:59.000Z

393

Gas Test Loop Functional and Technical Requirements  

SciTech Connect (OSTI)

This document defines the technical and functional requirements for a gas test loop (GTL) to be constructed for the purpose of providing a high intensity fast-flux irradiation environment for developers of advanced concept nuclear reactors. This capability is needed to meet fuels and materials testing requirements of the designers of Generation IV (GEN IV) reactors and other programs within the purview of the Advanced Fuel Cycle Initiative (AFCI). Space nuclear power development programs may also benefit by the services the GTL will offer. The overall GTL technical objective is to provide developers with the means for investigating and qualifying fuels and materials needed for advanced reactor concepts. The testing environment includes a fast-flux neutron spectrum of sufficient intensity to perform accelerated irradiation testing. Appropriate irradiation temperature, gaseous environment, test volume, diagnostics, and access and handling features are also needed. This document serves to identify those requirements as well as generic requirements applicable to any system of this kind.

Glen R. Longhurst; Soli T. Khericha; James L. Jones

2004-09-01T23:59:59.000Z

394

Mathematics Required Courses Cr. Semester Gr.  

E-Print Network [OSTI]

Discrete Mathematics 3 Math 321 or Math 421 Applied Stat. Methods Stat. Theory I 3 Elective Course* Cr Student: ID# Catalog: Advisor Upper Division Courses* Required Courses Cr. Semester Gr. *20 cr

Delene, David J.

395

Cold vacuum drying facility design requirements  

SciTech Connect (OSTI)

This release of the Design Requirements Document is a complete restructuring and rewrite to the document previously prepared and released for project W-441 to record the design basis for the design of the Cold Vacuum Drying Facility.

Irwin, J.J.

1997-09-24T23:59:59.000Z

396

Smart Grid Information Security (IS) Functional Requirement  

E-Print Network [OSTI]

It is important to implement safe smart grid environment to enhance people's lives and livelihoods. This paper provides information on smart grid IS functional requirement by illustrating some discussion points to the sixteen identified requirements. This paper introduces the smart grid potential hazards that can be referred as a triggering factor to improve the system and security of the entire grid. The background of smart information infrastructure and the needs for smart grid IS is described with the adoption of hermeneutic circle as methodology. Grid information technology and security-s session discusses that grid provides the chance of a simple and transparent access to different information sources. In addition, the transformation between traditional versus smart grid networking trend and the IS importance on the communication field reflects the criticality of grid IS functional requirement identification is introduces. The smart grid IS functional requirements described in this paper are general and ...

Ling, Amy Poh Ai

2011-01-01T23:59:59.000Z

397

Tucson- Solar Design Requirement for Homes  

Broader source: Energy.gov [DOE]

Tucson adopted an ordinance in June 2008 that requires all new single-family homes and duplexes in Tucson to be "solar-ready." The ordinance was developed by a stakeholder group which included...

398

ICE Pulse Oximeter Smart Alarm App Requirements  

E-Print Network [OSTI]

ICE Pulse Oximeter Smart Alarm App Requirements 6 March 2012 Revision 0 for an Integrated Clinical Environment (ICE) pulse oximetry monitoring app that provides.2 References [Purpose: List all ICE standards, and other standards and references

Huth, Michael

399

Requirements and Submission Process for Qualified Software  

Broader source: Energy.gov [DOE]

This document provides a complete list of requirements and submission details to have software qualified for calculating energy and power cost savings for commercial building tax deductions under tax code Section 179D.

400

ALS Beamline Design Requirements - Revision 1  

E-Print Network [OSTI]

6. Equipment protection system (EPS) qualification, specificcompleted. Equipment Protection System (EPS) Qualification:Qualification: The beamline has been checked for compliance with all relevant mechanical requirements for personnel safety and equipment

Heimann, Phil

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Siting Requirements for Anaerobic Lagoons (Iowa)  

Broader source: Energy.gov [DOE]

This statute provides regulations for required distances between anaerobic lagoons and residences or public use areas. The separation distances may be waived or reduced with the agreement of the...

402

Functional requirements to shape generation in CAD  

E-Print Network [OSTI]

An outstanding issue in computer-aided design (CAD) is the creation of geometric shapes from the description of functional requirements (FRs). This thesis presents a method that can generate assembled shapes from the given ...

Chung, Jinpyung, 1967-

2003-01-01T23:59:59.000Z

403

Computer Requirement ALL STUDENTS IN THE SCHOOL OF ARCHITECTURE ARE REQUIRED TO PROVIDE THEIR OWN  

E-Print Network [OSTI]

Computer Requirement ALL STUDENTS IN THE SCHOOL OF ARCHITECTURE ARE REQUIRED TO PROVIDE THEIR OWN PERSONAL LAPTOP COMPUTER. · All ENTERING GRADUATE STUDENTS in the School of Architecture are required to bring a computer. · All SECOND-YEAR UNDERGRADUATE STUDENTS accepted into the School of Architecture

Maxwell, Bruce D.

404

Integrating Customized Test Requirements with Traditional Requirements in Web Application Testing  

E-Print Network [OSTI]

Integrating Customized Test Requirements with Traditional Requirements in Web Application Testing Existing test suite reduction techniques employed for test- ing web applications have either used-based requirements in relation to test suite reduction for web applications. We investigate the use of usage

Sampath, Sreedevi

405

Grand Gulf-prioritization of regulatory requirements  

SciTech Connect (OSTI)

As cost pressures mount, Grand Gulf nuclear station (GGNS) is relying increasingly on various prioritization approaches to implement, modify, eliminate, or defer regulatory requirements. Regulatory requirements can be prioritized through the use of three measures: (1) safety (or risk) significance; (2) cost; and (3) public policy (or political) significance. This paper summarizes GGNS' efforts to implement solutions to regulatory issues using these three prioritization schemes to preserve a balance between cost and safety benefit.

Meisner, M.J. (Entergy Operations Inc., Port Gibson, MS (United States))

1993-01-01T23:59:59.000Z

406

Hanford analytical services quality assurance requirements documents  

SciTech Connect (OSTI)

Hanford Analytical Services Quality Assurance Requirements Document (HASQARD) is issued by the Analytical Services, Program of the Waste Management Division, US Department of Energy (US DOE), Richland Operations Office (DOE-RL). The HASQARD establishes quality requirements in response to DOE Order 5700.6C (DOE 1991b). The HASQARD is designed to meet the needs of DOE-RL for maintaining a consistent level of quality for sampling and field and laboratory analytical services provided by contractor and commercial field and laboratory analytical operations. The HASQARD serves as the quality basis for all sampling and field/laboratory analytical services provided to DOE-RL through the Analytical Services Program of the Waste Management Division in support of Hanford Site environmental cleanup efforts. This includes work performed by contractor and commercial laboratories and covers radiological and nonradiological analyses. The HASQARD applies to field sampling, field analysis, and research and development activities that support work conducted under the Hanford Federal Facility Agreement and Consent Order Tri-Party Agreement and regulatory permit applications and applicable permit requirements described in subsections of this volume. The HASQARD applies to work done to support process chemistry analysis (e.g., ongoing site waste treatment and characterization operations) and research and development projects related to Hanford Site environmental cleanup activities. This ensures a uniform quality umbrella to analytical site activities predicated on the concepts contained in the HASQARD. Using HASQARD will ensure data of known quality and technical defensibility of the methods used to obtain that data. The HASQARD is made up of four volumes: Volume 1, Administrative Requirements; Volume 2, Sampling Technical Requirements; Volume 3, Field Analytical Technical Requirements; and Volume 4, Laboratory Technical Requirements. Volume 1 describes the administrative requirements applicable to each of the other three volumes and is intended to be used in conjunction with the technical volumes.

Hyatt, J.E.

1997-09-25T23:59:59.000Z

407

Hamiltonian gadgets with reduced resource requirements  

E-Print Network [OSTI]

Application of the adiabatic model of quantum computation requires efficient encoding of the solution to computational problems into the lowest eigenstate of a Hamiltonian that supports universal adiabatic quantum computation. Experimental systems are typically limited to restricted forms of 2-body interactions. Therefore, universal adiabatic quantum computation requires a method for approximating quantum many-body Hamiltonians up to arbitrary spectral error using at most 2-body interactions. Hamiltonian gadgets, introduced around a decade ago, offer the only current means to address this requirement. Although the applications of Hamiltonian gadgets have steadily grown since their introduction, little progress has been made in overcoming the limitations of the gadgets themselves. In this experimentally motivated theoretical study, we introduce several gadgets which require significantly more realistic control parameters than similar gadgets in the literature. We employ analytical techniques which result in a reduction of the resource scaling as a function of spectral error for the commonly used subdivision, 3- to 2-body and $k$-body gadgets. Accordingly, our improvements reduce the resource requirements of all proofs and experimental proposals making use of these common gadgets. Next, we numerically optimize these new gadgets to illustrate the tightness of our analytical bounds. Finally, we introduce a new gadget that simulates a $YY$ interaction term using Hamiltonians containing only $\\{X,Z,XX,ZZ\\}$ terms. Apart from possible implications in a theoretical context, this work could also be useful for a first experimental implementation of these key building blocks by requiring less control precision without introducing extra ancillary qubits.

Yudong Cao; Ryan Babbush; Jacob Biamonte; Sabre Kais

2015-01-20T23:59:59.000Z

408

CONSTRUCTION AND CALIBRATION OF A LARGE-SCALE MICRO-SIMULATION MODEL OF THE SALT LAKE AREA  

E-Print Network [OSTI]

CONSTRUCTION AND CALIBRATION OF A LARGE-SCALE MICRO-SIMULATION MODEL OF THE SALT LAKE AREA H. Rakha-scale network using a microscopic simulation model. The requirements of a validated microscopic model for large of Intelligent Transportation System (ITS) applications. Typically, microscopic simulation models have been

Rakha, Hesham A.

409

Development of a Chemistry-Based, Predictive Method for Determining the Amount of Non-Pertechnetate Technetium in the Hanford Tanks: FY 2012 Progress Report  

SciTech Connect (OSTI)

This report describes investigations directed toward understanding the extent of the presence of highly alkaline soluble, non-pertechnetate technetium (n-Tc) in the Hanford Tank supernatants. The goals of this report are to: a) present a review of the available literature relevant to the speciation of technetium in the Hanford tank supernatants, b) attempt to establish a chemically logical correlation between available Hanford tank measurements and the presence of supernatant soluble n-Tc, c) use existing measurement data to estimate the amount of n-Tc in the Hanford tank supernatants, and d) report on any likely, process-friendly methods to eventually sequester soluble n-Tc from Hanford tank supernatants.

Rapko, Brian M.; Bryan, Samuel A.; Bryant, Janet L.; Chatterjee, Sayandev; Edwards, Matthew K.; Houchin, Joy Y.; Janik, Tadeusz J.; Levitskaia, Tatiana G.; Peterson, James M.; Peterson, Reid A.; Sinkov, Sergey I.; Smith, Frances N.; Wittman, Richard S.

2013-01-30T23:59:59.000Z

410

DOE CYBER SECURITY EBK: CORE COMPETENCY TRAINING REQUIREMENTS...  

Broader source: Energy.gov (indexed) [DOE]

CORE COMPETENCY TRAINING REQUIREMENTS: CA DOE CYBER SECURITY EBK: CORE COMPETENCY TRAINING REQUIREMENTS: CA DOE CYBER SECURITY EBK: CORE COMPETENCY TRAINING REQUIREMENTS. Key Cyber...

411

SEMI-ANNUAL REPORTING REQUIREMENTS (LNG EXPORTERS) | Department...  

Broader source: Energy.gov (indexed) [DOE]

SEMI-ANNUAL REPORTING REQUIREMENTS (LNG EXPORTERS) SEMI-ANNUAL REPORTING REQUIREMENTS (LNG EXPORTERS) Companies with authorizations to export LNG are required to file, on a...

412

Very Large System Dynamics Models - Lessons Learned  

SciTech Connect (OSTI)

This paper provides lessons learned from developing several large system dynamics (SD) models. System dynamics modeling practice emphasize the need to keep models small so that they are manageable and understandable. This practice is generally reasonable and prudent; however, there are times that large SD models are necessary. This paper outlines two large SD projects that were done at two Department of Energy National Laboratories, the Idaho National Laboratory and Sandia National Laboratories. This paper summarizes the models and then discusses some of the valuable lessons learned during these two modeling efforts.

Jacob J. Jacobson; Leonard Malczynski

2008-10-01T23:59:59.000Z

413

Conformal invariance of the planar beta-deformed N=4 SYM theory requires beta real  

E-Print Network [OSTI]

We study the \\cal{N}=1 SU(N) SYM theory which is a marginal deformation of the \\cal{N}=4 theory, with a complex deformation parameter \\beta. We consider the large N limit and study perturbatively the conformal invariance condition. We find that finiteness requires reality of the deformation parameter \\beta.

Federico Elmetti; Andrea Mauri; Silvia Penati; Alberto Santambrogio; Daniela Zanon

2006-06-14T23:59:59.000Z

414

An advanced control method for cascaded SMPS to reduce the energy storage requirements  

E-Print Network [OSTI]

An advanced control method for cascaded SMPS to reduce the energy storage requirements Damien Frost supplies con- tain large energy storage components that filter the pulsating power that is created by an AC strategies to reduce the size of those energy storage components to reduce the overall size and cost

Prodiæ, Aleksandar

415

Making more efficient fuel cells 08.09.2009 -Bacteria that generate significant amounts of electricity could be used in microbial fuel cells to provide  

E-Print Network [OSTI]

of electricity could be used in microbial fuel cells to provide power in remote environments or to convert waste to electricity. Professor Derek Lovley from the University of Massachusetts, USA isolated bacteria with large. The researchers isolated a strain of Geobacter sulfurreducens which they called KN400 that grew prolifically

Lovley, Derek

416

Design Considerations for Large Industrial Cogeneration Systems  

E-Print Network [OSTI]

available to fully exploit this technology be fully understood. This paper will review the considerations required to develop meaningful cogeneration systems. Turbine types, ratings, steam conditions and other parameters will be discussed and their impact...

Kovacik, J. M.

1979-01-01T23:59:59.000Z

417

Non-Stationary Random Process for Large-Scale Failure and Recovery of Power Distributions  

E-Print Network [OSTI]

A key objective of the smart grid is to improve reliability of utility services to end users. This requires strengthening resilience of distribution networks that lie at the edge of the grid. However, distribution networks are exposed to external disturbances such as hurricanes and snow storms where electricity service to customers is disrupted repeatedly. External disturbances cause large-scale power failures that are neither well-understood, nor formulated rigorously, nor studied systematically. This work studies resilience of power distribution networks to large-scale disturbances in three aspects. First, a non-stationary random process is derived to characterize an entire life cycle of large-scale failure and recovery. Second, resilience is defined based on the non-stationary random process. Close form analytical expressions are derived under specific large-scale failure scenarios. Third, the non-stationary model and the resilience metric are applied to a real life example of large-scale disruptions due t...

Wei, Yun; Galvan, Floyd; Couvillon, Stephen; Orellana, George; Momoh, James

2012-01-01T23:59:59.000Z

418

Probing the imprint of interacting dark energy on very large scales  

E-Print Network [OSTI]

The observed galaxy power spectrum acquires relativistic corrections from lightcone effects, and these corrections grow on very large scales. Future galaxy surveys in optical, infrared and radio bands will probe increasingly large wavelength modes and reach higher redshifts. In order to exploit the new data on large scales, an accurate analysis requires inclusion of the relativistic effects. This is especially the case for primordial non-Gaussianity and for extending tests of dark energy models to horizon scales. Here we investigate the latter, focusing on models where the dark energy interacts non-gravitationally with dark matter. Interaction in the dark sector can also lead to large-scale deviations in the power spectrum. If the relativistic effects are ignored, the imprint of interacting dark energy will be incorrectly identified and thus lead to a bias in constraints on interacting dark energy on very large scales.

Duniya, Didam; Maartens, Roy

2015-01-01T23:59:59.000Z

419

Program Management for Large Scale Engineering Programs  

E-Print Network [OSTI]

The goal of this whitepaper is to summarize the LAI research that applies to program management. The context of most of the research discussed in this whitepaper are large-scale engineering programs, particularly in the ...

Oehmen, Josef

420

Large-Scale Wind Training Program  

SciTech Connect (OSTI)

Project objective is to develop a credit-bearing wind technician program and a non-credit safety training program, train faculty, and purchase/install large wind training equipment.

Porter, Richard L. [Hudson Valley Community College

2013-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Finite N from Resurgent Large N  

E-Print Network [OSTI]

Due to instanton effects, gauge-theoretic large N expansions yield asymptotic series, in powers of 1/N^2. The present work shows how to generically make such expansions meaningful via their completion into resurgent transseries, encoding both perturbative and nonperturbative data. Large N resurgent transseries compute gauge-theoretic finite N results nonperturbatively (no matter how small N is). Explicit calculations are carried out within the gauge theory prototypical example of the quartic matrix model. Due to integrability in the matrix model, it is possible to analytically compute (fixed integer) finite N results. At the same time, the large N resurgent transseries for the free energy of this model was recently constructed. Together, it is shown how the resummation of the large N resurgent transseries matches the analytical finite N results up to remarkable numerical accuracy. Due to lack of Borel summability, Stokes phenomena has to be carefully taken into account, implying that instantons play a dominan...

Couso-Santamaría, Ricardo; Vaz, Ricardo

2015-01-01T23:59:59.000Z

422

Bayesian Analysis for Large Spatial Data  

E-Print Network [OSTI]

simulations, so Bayesian approach is infeasible for large sample size n due to the current computational power limit. In this dissertation, we propose two approaches to address this computational issue, namely, the auxiliary lattice model (ALM) approach...

Park, Jincheol

2012-10-19T23:59:59.000Z

423

Large Plate Lysimeter Efficiency for Collecting Water Transported from Soil to Ground Water  

SciTech Connect (OSTI)

A large, zero-tension, plate lysimeter (3.05 x 2.13 m) was installed to intercept percolating soil water at Bikini Atoll (11 35'N, 165 25'E), a former nuclear test-site. In two experiments controlled amounts of irrigation water were applied over the lysimeter and leachate water was collected. Evapotranspiration (ET) calculations were made using the Penman-Monteith equation and climate data collected at the atoll. The efficiency of the lysimeter was essentially 100% in contrast to low efficiencies reported for smaller plate lysimeters. Lysimeter design, installation, and water balance results are discussed.

Robison, W; Stone, E L; Hamilton, T

2004-04-14T23:59:59.000Z

424

Integrated Commissioning for a Large Medical Facility  

E-Print Network [OSTI]

Integrated Commissioning for A Large Medical Facility Yeqiao Zhu, Ph.D. Project Manager Texas A&M University Mingsheng Liu, Ph.D. Tommy Batten John Zhou, Ph.D. Associate Professor Researcher Control Engineer University of Nabraska Texas A... Commissioning (CC) can still reduce the energy consumption further and also can improve the building comfort level [Zhu, et al., 1997; Liu, et al., 1998; Claridge, et al., 1996; Haasl and Edmunds, 1997; Lawson, 19971. For the large medical center, the HVAC...

Zhu, Y.; Batten, T.; Turner, W. D.; Claridge, D. E.; Giebler, T.; Liu, M.; Zhou, J.; Cameron, C.; Keeble, B.; Hirchak, R.

2000-01-01T23:59:59.000Z

425

Long-Term Stewardship Science and Technology Requirements  

SciTech Connect (OSTI)

To ensure technology developed for long-term stewardship will meet existing requirements, a review of requirements was performed. In addition to identifying existing science and technology related requirements, gaps and conflicts of requirements were identified.

McDonald, J.K.; Nickelson, R.A.

2002-05-16T23:59:59.000Z

426

Long-term Stewardship Science and Technology Requirements  

SciTech Connect (OSTI)

To ensure technology developed for long-term stewardship will meet existing requirements, a review of requirements was performed. In addition to identifying existing science and technology related requirements, gaps and conflicts of requirements were identified.

Mcdonald, Jaimee Kristen; Nickelson, Reva Anne

2002-08-01T23:59:59.000Z

427

Identification of Market Power in Large-Scale Electric Energy Markets Bernard C. Lesieutre  

E-Print Network [OSTI]

Identification of Market Power in Large-Scale Electric Energy Markets Bernard C. Lesieutre Hyung and competitive operation of centrally- dispatched electricity markets. Traditional measures for market power demand and reserve requirements, a centrally-dispatched electricity market provides a transparent

428

Realistic Large Scale ad hoc Animal Monitoring Bartosz Wietrzyk, Milena Radenkovic  

E-Print Network [OSTI]

Realistic Large Scale ad hoc Animal Monitoring Bartosz Wietrzyk, Milena Radenkovic School for profitability of animal production as well as welfare of animals and farmers. In this paper we define requirements for such monitoring on the basis of questionnaires distributed to potential users and processing

Aickelin, Uwe

429

A FINITE ELEMENT APPROACH FOR SIMULATING THE QUENCHING OF LARGE ALUMINIUM COMPRESSOR WHEELS  

E-Print Network [OSTI]

stresses which result from high temperature gradients. This may influence successive machining steps due as shown in Figure 1. A wheel is made out of one massive billet and is quenched in hot water. A 3D-FE model is challenging due to a variety of reasons, such as requiring material data for large temperature range as well

430

Critical Perspectives on Large-Scale Distributed Applications and Production Grids  

E-Print Network [OSTI]

not progressed in phase. Progress in the next phase and generation of distributed applications will require that can seamlessly utilize distributed infrastructures in an extensible and scalable fashion. We believeCritical Perspectives on Large-Scale Distributed Applications and Production Grids Shantenu Jha1

Weissman, Jon

431

Microfluidic very large scale integration (mVLSI) with integrated micromechanical valves{  

E-Print Network [OSTI]

Microfluidic very large scale integration (mVLSI) with integrated micromechanical valves{ Ismail40258k Microfluidic chips with a high density of control elements are required to improve device and accessible high-density microfluidic chips, we have fabricated a monolithic PDMS valve architecture

Quake, Stephen R.

432

Simulation of large-amplitude motion of floating wind turbines using conservation of momentum  

E-Print Network [OSTI]

of a floating wind turbine support structure capable of maintaining a near-vertical tower requires buoyancy far. The compliant floating wind turbine system can be considered as a multi-body system including tower, rotorSimulation of large-amplitude motion of floating wind turbines using conservation of momentum Lei

Sweetman, Bert

433

A novel lithography technique for formation of large areas of uniform nanostructures  

E-Print Network [OSTI]

such as plasmonics, sensors, storage devices, solar cells, nano-filtration and artificial kidneys require a conventional exposure system with a broadband UV source centered at 400 nm. We also show a large area of highly by the combination of lift-off and NSP. The process is not limited to gold. Similar structures have been shown

Shahriar, Selim

434

Optimization and Large Scale Learning Optimization lies at the heart of almost every machine  

E-Print Network [OSTI]

Optimization and Large Scale Learning Optimization lies at the heart of almost every machine these facets requires optimization techniques tailored to not only respect them but to ag- gressively exploit by looking at the recent book [1] (MIT Press, 2011), or at the follow- ing workshops: (i) "Optimization

435

Advanced Scientific Computing Research Network Requirements  

SciTech Connect (OSTI)

The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the U.S. Department of Energy (DOE) Office of Science (SC), the single largest supporter of basic research in the physical sciences in the United States. In support of SC programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 25 years. In October 2012, ESnet and the Office of Advanced Scientific Computing Research (ASCR) of the DOE SC organized a review to characterize the networking requirements of the programs funded by the ASCR program office. The requirements identified at the review are summarized in the Findings section, and are described in more detail in the body of the report.

Dart, Eli; Tierney, Brian

2013-03-08T23:59:59.000Z

436

Nutritional Requirements of the Angora Goat.  

E-Print Network [OSTI]

COMPOSITION OF DIETS FOR AN- GORA GOATS Classes and weights (Ib.) of goats TDN (yo) DE (Mcalllb.) CP (%) Wezhers and dry does 50 50-60 1.0-1.2 9.0-10.4 60 50-58 1.0-1.2 9.0-10.4 80 50-54 1.0-1.1 9.0- 9.7 100 5 0 1 .0 9.0- 9.5 120 5 0 1 .0 9... in the , requirements table (Table 1) in that energy requirement of a 100-pound doe is less than twice that of a 50-pound :' doe. In contrast, energy requirements above the main- tenance level for prod~~ctive purposes are characteristic of the product and vary...

Huston, J. E.; Shelton, Maurice; Ellis, W. C.

1971-01-01T23:59:59.000Z

437

Civilian Radioactive Waste Management System Requirements Document  

SciTech Connect (OSTI)

The CRD addresses the requirements of Department of Energy (DOE) Order 413.3-Change 1, ''Program and Project Management for the Acquisition of Capital Assets'', by providing the Secretarial Acquisition Executive (Level 0) scope baseline and the Program-level (Level 1) technical baseline. The Secretarial Acquisition Executive approves the Office of Civilian Radioactive Waste Management's (OCRWM) critical decisions and changes against the Level 0 baseline; and in turn, the OCRWM Director approves all changes against the Level 1 baseline. This baseline establishes the top-level technical scope of the CRMWS and its three system elements, as described in section 1.3.2. The organizations responsible for design, development, and operation of system elements described in this document must therefore prepare subordinate project-level documents that are consistent with the CRD. Changes to requirements will be managed in accordance with established change and configuration control procedures. The CRD establishes requirements for the design, development, and operation of the CRWMS. It specifically addresses the top-level governing laws and regulations (e.g., ''Nuclear Waste Policy Act'' (NWPA), 10 Code of Federal Regulations (CFR) Part 63, 10 CFR Part 71, etc.) along with specific policy, performance requirements, interface requirements, and system architecture. The CRD shall be used as a vehicle to incorporate specific changes in technical scope or performance requirements that may have significant program implications. Such may include changes to the program mission, changes to operational capability, and high visibility stakeholder issues. The CRD uses a systems approach to: (1) identify key functions that the CRWMS must perform, (2) allocate top-level requirements derived from statutory, regulatory, and programmatic sources, and (3) define the basic elements of the system architecture and operational concept. Project-level documents address CRD requirements by further defining system element functions, decomposing requirements into significantly greater detail, and developing designs of system components, facilities, and equipment. The CRD addresses the identification and control of functional, physical, and operational boundaries between and within CRWMS elements. The CRD establishes requirements regarding key interfaces between the CRWMS and elements external to the CRWMS. Project elements define interfaces between CRWMS program elements. The Program has developed a change management process consistent with DOE Order 413.3-Change 1. Changes to the Secretarial Acquisition Executive and Program-level baselines must be approved by a Program Baseline Change Control Board. Specific thresholds have been established for identifying technical, cost, and schedule changes that require approval. The CRWMS continually evaluates system design and operational concepts to optimize performance and/or cost. The Program has developed systems analysis tools to assess potential enhancements to the physical system and to determine the impacts from cost saving initiatives, scientific and technological improvements, and engineering developments. The results of systems analyses, if appropriate, are factored into revisions to the CRD as revised Programmatic Requirements.

C.A. Kouts

2006-05-10T23:59:59.000Z

438

Bistability: Requirements on Cell-Volume, Protein Diffusion, and Thermodynamics  

E-Print Network [OSTI]

Bistability is considered wide-spread among bacteria and eukaryotic cells, useful e.g. for enzyme induction, bet hedging, and epigenetic switching. However, this phenomenon has mostly been described with deterministic dynamic or well-mixed stochastic models. Here, we map known biological bistable systems onto the well-characterized biochemical Schloegl model, using analytical calculations and stochastic spatio-temporal simulations. In addition to network architecture and strong thermodynamic driving away from equilibrium, we show that bistability requires fine-tuning towards small cell volumes (or compartments) and fast protein diffusion (well mixing). Bistability is thus fragile and hence may be restricted to small bacteria and eukaryotic nuclei, with switching triggered by volume changes during the cell cycle. For large volumes, single cells generally loose their ability for bistable switching and instead undergo a first-order phase transition.

Robert G. Endres

2015-03-06T23:59:59.000Z

439

Study of fueling requirements for the Engineering Test Reactor  

SciTech Connect (OSTI)

An assessment of the fueling requirement for the TIBER Engineering Test Reactor is studied. The neutral shielding pellet ablation model with the inclusion of the effects of the alpha particles is used for our study. The high electron temperature in a reactor-grade plasma makes pellet penetration very difficult. The launch length has to be very large (several tens of meters) in order to avoid pellet breakage due to the low inertial strength of DT ''ice.'' The minimum repetition rate corresponding to the largest allowable pellet, is found to be about 1 Hz. A brief survey is done on the various operational and conceptual pellet injection schemes for plasma fueling. The underlying conclusion is that an alternative fueling scheme of coaxial compact-toroid plasma gun is very likely needed for effective central fueling of reactor-grade plasmas. 16 refs.

Ho, S.K.; Perkins, L.J.

1987-10-16T23:59:59.000Z

440

DLFM library tools for large scale dynamic applications.  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DLFM library tools for large scale dynamic applications DLFM library tools for large scale dynamic applications Large scale Python and other dynamic applications may spend huge...

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Ootw Tool Requirements in Relation to JWARS  

SciTech Connect (OSTI)

This document reports the results of the CMke of the Secretary of Defense/Program Analysis & Evaluation (OSD/PA&E) sponsored project to identify how Operations Other Than War (OOTW) tool requirements relate to the Joint Warfare Simulation (JWARS) and, more generally, to joint analytical modeling and simulation (M&S) requirements. It includes recommendations about which OOTW tools (and functionality within tools) should be included in JWARS, which should be managed as joint analytical modeling and simulation (M&S) tools, and which should be left for independent development.

Hartley III, D.S.; Packard, S.L.

1998-01-01T23:59:59.000Z

442

Nuclear Power and the World's Energy Requirements  

E-Print Network [OSTI]

The global requirements for energy are increasing rapidly as the global population increases and the under-developed nations become more advanced. The traditional fuels used in their traditional ways will become increasingly unable to meet the demand. The need for a review of the energy sources available is paramount, although the subsequent need to develop a realistic strategy to deal with all local and global energy requirements is almost as important. Here attention will be restricted to examining some of the claims and problems of using nuclear power to attempt to solve this major question.

V. Castellano; R. F. Evans; J. Dunning-Davies

2004-06-10T23:59:59.000Z

443

Requirements for Bridge Inspection | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015Department ofRequirements Crosswalk ofRequirements for

444

Computer Science Graduation Requirements Checklist Spring 2006  

E-Print Network [OSTI]

Computer Science Graduation Requirements Checklist ­ Spring 2006 Computer Science Courses Course Gr. Sem. Comments CSE 113 Foundations of Computer Science I CSE 114 Computer Science I [prerequisite: CSE 110] CSE 213 Foundations of Computer Science II CSE 214 Computer Science II CSE 219 Computer Science

Zadok, Erez

445

Energy System Emissions and Materiel Requirements  

SciTech Connect (OSTI)

This report compares a central station solar photovoltaic plant to two coal plants, one gas plant, and a nuclear plant. It is of interest to geothermal energy studies only as source materials for comparisons on material requirements. This contains 48 references / citations. (DJE 2005)

None

1989-02-01T23:59:59.000Z

446

Air Quality: Construction Project Air Permit Requirements  

E-Print Network [OSTI]

Air Quality: Construction Project Air Permit Requirements Department: Chemical and General Safety Program: Air Quality Owner: Program Manager Authority: ES&H Manual, Chapter 30, Air Quality1 All manager or operator must submit the completed form to the air quality program manager before the project

Wechsler, Risa H.

447

Requirements for a Concentration in Energy Technologies  

E-Print Network [OSTI]

Technologies ­ 4 cr ENG EC 417 ­ Electric Energy Systems: Adapting to Renewable Resources ­ 4 cr Additional* - Methods of Environmental Policy ­ 4 cr ENG ME 533 ­ Energy Conversion ­ 4 cr ENG EC/ME/SE 543Requirements for a Concentration in Energy Technologies The concentration in Energy Technologies

448

PID Controller Synthesis with Specified Stability Requirement  

E-Print Network [OSTI]

PID Controller Synthesis with Specified Stability Requirement for Some Classes of MIMO Systems T. S+Integral+Derivative (PID) con- trollers, where the closed-loop poles can be assigned to the left of an axis shifted PID-controllers with this property of small negative real-part assignability of closed-loop poles

Gundes, A. N.

449

CRAD, Facility Safety- Technical Safety Requirements  

Broader source: Energy.gov [DOE]

A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) that can be used for assessment of a contractor's Technical Safety Requirments (TSA).

450

Airfoil Optimization Using Practical Aerodynamic Design Requirements  

E-Print Network [OSTI]

Airfoil Optimization Using Practical Aerodynamic Design Requirements Howard P. Buckley, Beckett Y., Toronto, Ontario, M3H 5T6, Canada Practical aerodynamic design problems must balance the goal the aerodynamic constraints imposed at the off-design operating conditions to be treated explicitly. Both methods

Zingg, David W.

451

Mobile Communities Requirements and Features for Success  

E-Print Network [OSTI]

Mobile Communities ­ Requirements and Features for Success Sarah Denis Heldt Media Informatics LMU.broll@ifi.lmu.de Philipp Lehmann Burda Wireless GmbH philipp.lehmann@burda.com ABSTRACT Advancements in mobile technologies and decreasing charges are starting to leverage the mobile usage of the internet and its applications. This paper

452

Requirements for Hybrid Cosimulation David Broman  

E-Print Network [OSTI]

Requirements for Hybrid Cosimulation David Broman Lev Greenberg Edward A. Lee Michael Masin Stavros), and the Center for Hybrid and Embedded Software Systems (CHESS) at UC Berkeley (supported by NSF award #0931843 (ActionWebs), NRL award #N0013-12-1-G015, the Assistant Secretary for Energy Efficiency and Renewable

453

Biology The Science of Life Minor Requirements  

E-Print Network [OSTI]

Biology ­ The Science of Life Minor Requirements To minor in Biology students must complete the following courses (33-36 units): BIOL105 General Biology I BIOL106 General Biology II BIOL212 Cell Physiology (pre-requisite: minimum C- in General Biology BIOL105 and BIOL106) BIOL310 Genetics (prequisite

Galles, David

454

Extracting Security Control Requirements University of Tulsa  

E-Print Network [OSTI]

-component systems or systems of systems (SoSs) are difficult to verify because the security controls must to formulate functional requirements from security controls with SoSs as the target. The process starts accepted security controls for "Federal Information Systems and Organizations" [8]. NIST defines security

Gamble, R. F.

455

THE REQUIREMENTS OF A FUSION DEMONSTRATION  

E-Print Network [OSTI]

and will analyze the strategies, facilities, and prior testing requirements needed to demonstrate electric power Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes constitute or imply its endorsement, recommendation, or favoring by the United States Government or any

Najmabadi, Farrokh

456

Requirements For An Advanced Fueling System  

E-Print Network [OSTI]

supported by DOE grant No. DE-FG03-02ER54686 Supported by 1 #12;Reactor Fueling Requirements Not Adequately for current drive, a fueling system is all that a burning plasma system may be able to rely on to alter core density peaking via. core fuelling provides more flexibility to reach ignition 3Raman/FESAC/7Aug07 #12

Princeton Plasma Physics Laboratory

457

Requirements Engineering Technology Transfer: An Experience Report  

E-Print Network [OSTI]

Requirements Engineering Technology Transfer: An Experience Report Francisco A. C. Pinheiro1 Julio of software engineering technology transfer was identified by Pfleeger (1999). She came to the con- clusion Journal of Technology Transfer, 28, 159­165, 2003 ©2003 Kluwer Academic Publishers. Manufactured

Leite, Julio Cesar Sampaio do Prado

458

GENERATING REQUIREMENTS FOR FUTURISTIC HETROGENOUS UNMANNED SYSTEMS  

E-Print Network [OSTI]

Institute of Technology, Cambridge, MA 2 Mechanical-Aeronautical Engineering, Instituto Tecnologico de either on land or underwater; thus, no SMEs are available to interview. Through a multi-tiered approach to requirements generation, this hybrid CTA methodology compensates for the lack of subject matter experts (SMEs

Cummings, Mary "Missy"

459

Library Requirements for New Programs and  

E-Print Network [OSTI]

Library Requirements for New Programs and Major Revisions This form is to be completed the University Library, University of Saskatchewan. Contact the appropriate Liaison Librarian for assistance. 1/College: Degree Level (undergraduate or graduate) 2. Library Resources 2.1 Resources are/will be located mainly

Saskatchewan, University of

460

On Linguistic Quality of Natural Language Requirements  

E-Print Network [OSTI]

, has now reached its limits. Like classical engineering switched from quality control to total qualityOn Linguistic Quality of Natural Language Requirements F. Fabbrini 1 , M. Fusani 1 , V. Gervasi 2 Informatica, Corso Italia 40, 56125 Pisa Italy. Abstract. We recognize the need for defining a quality model

Ruggieri, Salvatore

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Tourism Planning and Development Required Courses  

E-Print Network [OSTI]

Tourism Planning and Development Required Courses TOUR 400, Introduction to Tourism EREC 411 and Applications TOUR 560, Special Topics (8 credits) CEP 614, Fundamentals of Planning TOUR 615, Tourism Planning and Development TOUR 633, Economics of Travel and Tourism TOUR 700, Marketing Communications

New Hampshire, University of

462

Integrating Customized Test Requirements with Traditional  

E-Print Network [OSTI]

between QA and Development by Michal Blumenstyk 4. Causes of Failures in Web Applications by Solia Pertet.9) Deployment Users Test Cases Web Application Implementation (v.1.0) User Sessions Replay Tool Test Cases-WEB, July 2006 Sreedevi Sampath . University of Delaware 5/29 Program Coverage-based Test Requirement

Sampath, Sreedevi

463

REQUIRED COURSES M351: Principles of Marketing  

E-Print Network [OSTI]

Managers at internet companies such as Google, or Amazon start at a salary of $53,000 Search Engine website appears in the search results when relevant search terms are entered. Virgin Airlines converses with its customers through a company page on Facebook and Twitter. From small businesses to large

de Lijser, Peter

464

Value-Based Requirements Traceability: Lessons Learned  

E-Print Network [OSTI]

University, A-4040 Linz, Austria {ae,pg}@sea.uni-linz.ac.at 2 Siemens IT Solutions and Services, Siemens Austria, Gudrunstraße 11, A-1100 Vienna, Austria matthias.a.heindl@siemens.com 3 Institute for Software in the US and Europe. These included large organizations such as Siemens Austria [13], Boeing Company

465

Feasibility of Large Free-standing Liquid Films in Space  

E-Print Network [OSTI]

We consider the feasibility of large-scale free-standing thin liquid film experiment in the space environment as a new realization to study two-dimensional hydrodynamics. We identify material and environmental criteria necessary to avoid freezing, evaporation, chemical degradation, and spontaneous collapse of the film. These criteria pose no obstacles to achieving films of kilometer scale and lifetime of many months, with attainable Reynolds number up to 10^7. However, impacts from meteoroids pose a serious threat to the film, and require substantial shielding or unproven self-healing properties in the film. Current theoretical and experimental studies of two-dimensional turbulence are briefly reviewed. We also describe a specific candidate liquid for the film.

Rui Zheng; Thomas A. Witten

2006-12-12T23:59:59.000Z

466

PV/cogeneration hybrid system nets large contract  

SciTech Connect (OSTI)

Alpha Solarco Inc. announced on May 18, 1987 the signing of two $175 million exclusive development contracts with the Pawnee and Otoe-Missouria Tribes of Oklahoma to build two 70,000-kilowatt photovoltaic electric generating stations on Tribal lands in Oklahoma to supply Indian and other requirements. The projects, to be built in four phases, will each consists of 35,000 kilowatts of photovoltaic generating capacity to be supplied by the company's proprietary Modular Solar-Electric Photovoltaic Generator (MSEPG), and 35,000 kilowatts of gas-fired cogeneration. Alpha Solarco is starting to build and finance itself a 500-kilowatt demonstration plant as the initial step in the first project. This plant will be used to demonstrate that proven MSEPG design and technology can be integrated in electric utility systems, either as a base-load generator for small utilities, or as a peak-shaving device for large ones.

Not Available

1987-09-01T23:59:59.000Z

467

Atypical Behavior Identification in Large Scale Network Traffic  

SciTech Connect (OSTI)

Cyber analysts are faced with the daunting challenge of identifying exploits and threats within potentially billions of daily records of network traffic. Enterprise-wide cyber traffic involves hundreds of millions of distinct IP addresses and results in data sets ranging from terabytes to petabytes of raw data. Creating behavioral models and identifying trends based on those models requires data intensive architectures and techniques that can scale as data volume increases. Analysts need scalable visualization methods that foster interactive exploration of data and enable identification of behavioral anomalies. Developers must carefully consider application design, storage, processing, and display to provide usability and interactivity with large-scale data. We present an application that highlights atypical behavior in enterprise network flow records. This is accomplished by utilizing data intensive architectures to store the data, aggregation techniques to optimize data access, statistical techniques to characterize behavior, and a visual analytic environment to render the behavioral trends, highlight atypical activity, and allow for exploration.

Best, Daniel M.; Hafen, Ryan P.; Olsen, Bryan K.; Pike, William A.

2011-10-23T23:59:59.000Z

468

Damping of lower hybrid waves in large spectral gap configurations  

SciTech Connect (OSTI)

Extensive experimental data support reliable power deposition and current drive by lower-hybrid (LH) waves in conditions where a large spectral gap exists between the nominal parallel index of refraction prescribed by the antenna characteristics and phasing, and that required for significant Landau damping to take place. We argue that only a significant modification of the initial spectrum at the plasma edge could explain experimental observations. Based on this assumption, a new prescription for reliable simulations of LH current drive using ray-tracing and Fokker-Planck modelling is proposed. A remarkable agreement between experimental observations in the Tore Supra tokamak and simulations is obtained for relevant parametric scans, including electron density and LH waveguide phasing. In an effort to investigate the possible role of fluctuations, it is shown that the spectral gap can be bridged dynamically in the presence of a fluctuating LH spectrum.

Decker, J.; Peysson, Y.; Artaud, J.-F.; Nilsson, E.; Ekedahl, A.; Goniche, M.; Hillairet, J.; Mazon, D. [CEA, IRFM, F-13108 Saint Paul lez Durance (France)

2014-02-12T23:59:59.000Z

469

An advanced open-path atmospheric pollution monitor for large areas  

SciTech Connect (OSTI)

Large amounts of toxic waste materials, generated in manufacturing fuel for nuclear reactors, are stored in tanks buried over large areas at DOE sites. Flammable and hazardous gases are continually generated by chemical reactions in the waste materials. To prevent explosive concentrations of these gases, the gases are automatically vented to the atmosphere when the pressure exceeds a preset value. Real-time monitoring of the atmosphere above the tanks with automatic alarming is needed to prevent exposing workers to unsafe conditions when venting occurs. This project is to design, develop, and test an atmospheric pollution monitor which can measure concentrations of DOE-specified and EPA-specified hazardous gases over ranges as long as 4km. A CO{sub 2} laser to measure absorption spectra and to determine the distance over which the measurements are made, is combined with an acousto-optic tunable filter (AOTF) to measure thermal emission spectra.

Taylor, L.

1995-12-31T23:59:59.000Z

470

Large dynamic range diagnostics for high current electron LINACs  

SciTech Connect (OSTI)

The Jefferson Lab FEL driver accelerator - Energy Recovery Linac has provided a beam with average current of up to 9 mA and beam energy of 135 MeV. The high power beam operations have allowed developing and testing methods and approaches required to set up and tune such a facility simultaneously for the high beam power and high beam quality required for high performance FEL operations. In this contribution we briefly review this experience and outline problems that are specific to high current - high power non-equilibrium linac beams. While the original strategy for beam diagnostics and tuning have proven to be quite successful, some shortcomings and unresolved issues were also observed. The most important issues are the non-equilibrium (non-Gaussian) nature of the linac beam and the presence of small intensity - large amplitude fraction of the beam a.k.a. beam halo. Thus we also present a list of the possible beam halo sources and discuss possible mitigations means. We argue that for proper understanding and management of the beam halo large dynamic range (>10{sup 6}) transverse and longitudinal beam diagnostics can be used. We also present results of transverse beam profile measurements with the dynamic range approaching 10{sup 5} and demonstrate the effect the increased dynamic range has on the beam characterization, i.e., emittance and Twiss parameters measurements. We also discuss near future work planned in this field and where the JLab FEL facility will be used for beam tests of the developed of new diagnostics.

Evtushenko, P., E-mail: Pavel.Evtushenko@jlab.org [Thomas Jefferson National Accelerator Facility 12000 Jefferson Avenue, Newport News, VA 23606 (United States)

2013-11-07T23:59:59.000Z

471

105-DR Large Sodium Fire Facility closure plan. Revision 1  

SciTech Connect (OSTI)

The Hanford Site, located northwest of the city of Richland, Washington, houses reactors, chemical-separation systems, and related facilities used for the production of special nuclear materials, and activities associated with nuclear energy development. The 105-DR Large Sodium Fire Facility (LSFF), which was in operation from about 1972 to 1986, was a research laboratory that occupied the former ventilation supply room on the southwest side of the 105-DR Reactor facility. The LSFF was established to provide a means of investigating fire and safety aspects associated with large sodium or other metal alkali fires in the liquid metal fast breeder reactor (LMFBR) facilities. The 105-DR Reactor facility was designed and built in the 1950`s and is located in the 100-D Area of the Hanford Site. The building housed the 105-DR defense reactor, which was shut down in 1964. The LSFF was initially used only for engineering-scale alkali metal reaction studies. In addition, the Fusion Safety Support Studies program sponsored intermediate-size safety reaction tests in the LSFF with lithium and lithium lead compounds. The facility has also been used to store and treat alkali metal waste, therefore the LSFF is subject to the regulatory requirements for the storage and treatment of dangerous waste. Closure will be conducted pursuant to the requirements of the Washington Administrative Code (WAC) 173-303-610. This closure plan presents a description of the facility, the history of waste managed, and the procedures that will be followed to close the LSFF as an Alkali Metal Treatment Facility. No future use of the LSFF is expected.

Not Available

1993-05-01T23:59:59.000Z

472

Large muon electric dipole moment from flavor?  

SciTech Connect (OSTI)

We study the prospects and opportunities of a large muon electric dipole moment (EDM) of the order (10{sup -24}-10{sup -22}) ecm. We investigate how natural such a value is within the general minimal supersymmetric extension of the standard model with CP violation from lepton flavor violation in view of the experimental constraints. In models with hybrid gauge-gravity-mediated supersymmetry breaking, a large muon EDM is indicative for the structure of flavor breaking at the Planck scale, and points towards a high messenger scale.

Hiller, Gudrun; Huitu, Katri; Rueppell, Timo; Laamanen, Jari [CERN, Theory Division, CH-1211 Geneva 23 (Switzerland) and Institut fuer Physik, Technische Universitaet Dortmund, D-44221 Dortmund (Germany); Department of Physics, and Helsinki Institute of Physics, FIN-00014 University of Helsinki (Finland); Theoretical High Energy Physics, Radboud University Nijmegen, P.O. Box 9010, NL-6500 GL Nijmegen (Netherlands)

2010-11-01T23:59:59.000Z

473

Large volume flow-through scintillating detector  

DOE Patents [OSTI]

A large volume flow through radiation detector for use in large air flow situations such as incinerator stacks or building air systems comprises a plurality of flat plates made of a scintillating material arranged parallel to the air flow. Each scintillating plate has a light guide attached which transfers light generated inside the scintillating plate to an associated photomultiplier tube. The output of the photomultiplier tubes are connected to electronics which can record any radiation and provide an alarm if appropriate for the application.

Gritzo, Russ E. (Los Alamos, NM); Fowler, Malcolm M. (Los Alamos, NM)

1995-01-01T23:59:59.000Z

474

Building HVAC Requirements Overview Page 4-1 4 Building HVAC Requirements  

E-Print Network [OSTI]

heating, radiant floor systems, evaporative cooling, gas cooling, ground-source heat pumps, and wood space requirements for additions to existing dwellings and for alterations to existing heating and cooling systems packages. Package C permits electric resistance space heating, but requires significantly greater

475

Requirements for the MINOR in Environmental Science Five courses required. Total credits = minimum of 15  

E-Print Network [OSTI]

Requirements for the MINOR in Environmental Science Five courses required. Total credits = minimum to Environmental Science OR NRC 100 Environment and Society OR GEO-SCI 100 Global Environmental Change Select two (2) of following four courses ENVIRSCI 213 Introduction to Environmental Policy ENVIRSCI 214

Massachusetts at Amherst, University of

476

Landscape & Nursery Internship Requirements 11-26-07 LANDSCAPE AND NURSERY INTERNSHIP OVERVIEW & REQUIREMENTS  

E-Print Network [OSTI]

Landscape & Nursery Internship Requirements 11-26-07 LANDSCAPE AND NURSERY INTERNSHIP OVERVIEW & REQUIREMENTS It is the student's responsibility to set-up their internship with approval from their coordinator at the end of March. Typically, students begin their internships in April and work through mid-August. You

477

High Energy Physics and Nuclear Physics Network Requirements  

SciTech Connect (OSTI)

The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the U.S. Department of Energy (DOE) Office of Science (SC), the single largest supporter of basic research in the physical sciences in the United States. In support of SC programs, ESnet regularly updates and refreshes its understanding of the networking requirements needed by instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 25 years. In August 2013, ESnet and the DOE SC Offices of High Energy Physics (HEP) and Nuclear Physics (NP) organized a review to characterize the networking requirements of the programs funded by the HEP and NP program offices. Several key findings resulted from the review. Among them: 1. The Large Hadron Collider?s ATLAS (A Toroidal LHC Apparatus) and CMS (Compact Muon Solenoid) experiments are adopting remote input/output (I/O) as a core component of their data analysis infrastructure. This will significantly increase their demands on the network from both a reliability perspective and a performance perspective. 2. The Large Hadron Collider (LHC) experiments (particularly ATLAS and CMS) are working to integrate network awareness into the workflow systems that manage the large number of daily analysis jobs (1 million analysis jobs per day for ATLAS), which are an integral part of the experiments. Collaboration with networking organizations such as ESnet, and the consumption of performance data (e.g., from perfSONAR [PERformance Service Oriented Network monitoring Architecture]) are critical to the success of these efforts. 3. The international aspects of HEP and NP collaborations continue to expand. This includes the LHC experiments, the Relativistic Heavy Ion Collider (RHIC) experiments, the Belle II Collaboration, the Large Synoptic Survey Telescope (LSST), and others. The international nature of these collaborations makes them heavily reliant on transoceanic connectivity, which is subject to longer term service disruptions than terrestrial connectivity. The network engineering aspects of undersea connectivity will continue to be a significant part of the planning, deployment, and operation of the data analysis infrastructure for HEP and NP experiments for the foreseeable future. Given their critical dependency on networking services, the experiments have expressed the need for tight integration (both technically and operationally) of the domestic and the transoceanic parts of the network infrastructure that supports the experiments. 4. The datasets associated with simulations continue to increase in size, and the need to move these datasets between analysis centers is placing ever-increasing demands on networks and on data management systems at the supercomputing centers. In addition, there is a need to harmonize cybersecurity practice with the data transfer performance requirements of the science. This report expands on these points, and addresses others as well. The report contains a findings section in addition to the text of the case studies discussed during the review.

Dart, Eli; Bauerdick, Lothar; Bell, Greg; Ciuffo, Leandro; Dasu, Sridhara; Dattoria, Vince; De, Kaushik; Ernst, Michael; Finkelson, Dale; Gottleib, Steven; Gutsche, Oliver; Habib, Salman; Hoeche, Stefan; Hughes-Jones, Richard; Ibarra, Julio; Johnston, William; Kisner, Theodore; Kowalski, Andy; Lauret, Jerome; Luitz, Steffen; Mackenzie, Paul; Maguire, Chales; Metzger, Joe; Monga, Inder; Ng, Cho-Kuen; Nielsen, Jason; Price, Larry; Porter, Jeff; Purschke, Martin; Rai, Gulshan; Roser, Rob; Schram, Malachi; Tull, Craig; Watson, Chip; Zurawski, Jason

2014-03-02T23:59:59.000Z

478

Congestion Management Requirements, Methods and Performance Indices  

SciTech Connect (OSTI)

Transmission congestion occurs when there is insufficient transmission capacity to simultaneously accommodate all requests for transmission service within a region. Historically, vertically integrated utilities managed this condition by constraining the economic dispatch of generators with the objective of ensuring security and reliability of their own and/or neighboring systems. Electric power industry restructuring has moved generation investment and operations decisions into the competitive market but has left transmission as a communal resource in the regulated environment. This mixing of competitive generation and regulated transmission makes congestion management difficult. The difficulty is compounded by increases in the amount of congestion resulting from increased commercial transactions and the relative decline in the amount of transmission. Transmission capacity, relative to peak load, has been declining in all regions of the U.S. for over a decade. This decline is expected to continue. Congestion management schemes used today have negative impacts on energy markets, such as disruptions and monetary penalties, under some conditions. To mitigate these concerns various congestion management methods have been proposed, including redispatch and curtailment of scheduled energy transmission. In the restructured electric energy industry environment, new congestion management approaches are being developed that strive to achieve the desired degree of reliability while supporting competition in the bulk power market. This report first presents an overview and background on key issues and emerging approaches to congestion management. It goes on to identify and describe policies affecting congestion management that are favored and/or are now being considered by FERC, NERC, and one of the regional reliability councils (WSCC). It reviews the operational procedures in use or proposed by three of the leading independent system operators (ISOs) including ERCOT, California ISO, and PJM. Finally, it presents recommendations for evaluating the competing alternative approaches and developing metrics to use in such evaluations. As with any report concerning electricity restructuring, specific details quickly become dated. Individual utilities, states and regions will inevitably change rules and procedures even during the time it takes to publish a report. Hopefully, the general conclusions are more robust and this report will continue to have value even after some of the specific details have changed.

Kirby, B.J.

2002-08-28T23:59:59.000Z

479

7-29 A coal-burning power plant produces 300 MW of power. The amount of coal consumed during a one-day period and the rate of air flowing through the furnace are to be determined.  

E-Print Network [OSTI]

7-11 7-29 A coal-burning power plant produces 300 MW of power. The amount of coal consumed during The heating value of the coal is given to be 28,000 kJ/kg. Analysis (a) The rate and the amount of heat inputs'tQQ The amount and rate of coal consumed during this period are kg/s48.33 s360024 kg10893.2 MJ/kg28 MJ101.8 6

Bahrami, Majid

480

Large hadron collider (LHC) project quality assurance plan  

SciTech Connect (OSTI)

The LHC Quality Assurance Plan is a set of operating principles, requirements, and practices used to support Berkeley Lab's participation in the Large Hadron Collider Project. The LHC/QAP is intended to achieve reliable, safe, and quality performance in the LHC project activities. The LHC/QAP is also designed to fulfill the following objectives: (1) The LHC/QAP is Berkeley Lab's QA program document that describes the elements necessary to integrate quality assurance, safety management, and conduct of operations into the Berkeley Lab's portion of the LHC operations. (2) The LHC/QAP provides the framework for Berkeley Lab LHC Project administrators, managers, supervisors, and staff to plan, manage, perform, and assess their Laboratory work. (3) The LHC/QAP is the compliance document that conforms to the requirements of the Laboratory's Work Smart Standards for quality assurance (DOE O 414.1, 10 CFR 830.120), facility operations (DOE O 5480.19), and safety management (DOE P 450.4).

Gullo, Lisa; Karpenko, Victor; Robinson, Kem; Turner, William; Wong, Otis

2002-09-30T23:59:59.000Z

Note: This page contains sample records for the topic "requires large amounts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Development of knowledge bases for large steam turbine transients  

SciTech Connect (OSTI)

At this time, a number of high-qualified expert teams in different countries have accumulated significant experience in working up and introducing proficient algorithms of automated control, diagnostics, monitoring, on-line informative support, and off-line analysis for large steam turbines of fossil-fired and nuclear power plant units at their transients. In particular, such works were carried out at All-Russia Thermal Engineering Research Institute in Moscow. When put into effect, these developments do improve plant unit operation and maintenance. The creation of these algorithms is based on deep technological research of turbine transients with the use of their mathematical modeling. Currently, the central problem becomes a reiteration and adaptation of these developments to other objects which differ in design, scheme, and operation features. This problem is to be solved at the least cost. For certain complex tasks, it seems to be expedient to use expert system methodology with special knowledge bases. Along with the selection of such tasks, the creation of more or less general knowledge bases requires us to stratify the potential objects according to their principle features. The proposed forms of a knowledge presentation, including the mathematical models and logical rules, should correspond to the considered tasks and objects, as well as to the program tools to be applied. Such developments have been carried out for some tasks of the operating informative support and post-operating analysis of large steam turbine transients as well as their mathematical modeling.

Leyzerovich, A. [Washington Univ., St. Louis, MO (United States)

1995-09-01T23:59:59.000Z

482

Large Deformation Constitutive Laws for Isotropic Thermoelastic Materials  

SciTech Connect (OSTI)

We examine the approximations made in using Hooke's law as a constitutive relation for an isotropic thermoelastic material subjected to large deformation by calculating the stress evolution equation from the free energy. For a general thermoelastic material, we employ the volume-preserving part of the deformation gradient to facilitate volumetric/shear strain decompositions of the free energy, its first derivatives (the Cauchy stress and entropy), and its second derivatives (the specific heat, Grueneisen tensor, and elasticity tensor). Specializing to isotropic materials, we calculate these constitutive quantities more explicitly. For deformations with limited shear strain, but possibly large changes in volume, we show that the differential equations for the stress components involve new terms in addition to the traditional Hooke's law terms. These new terms are of the same order in the shear strain as the objective derivative terms needed for frame indifference; unless the latter terms are negligible, the former cannot be neglected. We also demonstrate that accounting for the new terms requires that the deformation gradient be included as a field variable

Plohr, Bradley J. [Los Alamos National Laboratory; Plohr, Jeeyeon N. [Los Alamos National Laboratory

2012-07-25T23:59:59.000Z

483

Large-amplitude solitons in gravitationally balanced quantum plasmas  

SciTech Connect (OSTI)

Using the quantum fluid model for self-gravitating quantum plasmas with the Bernoulli pseudopotential method and taking into account the relativistic degeneracy effect, it is shown that gravity-induced large-amplitude density rarefaction solitons can exist in gravitationally balanced quantum plasmas. These nonlinear solitons are generated due to the force imbalance between the gravity and the quantum fluid pressure via local density perturbations, similar to that on shallow waters. It is found that both the fluid mass-density and the atomic-number of the constituent ions have significant effect on the amplitude and width of these solitonic profiles. Existence of a large-scale gravity-induced solitonic activities on neutron-star surface, for instance, can be a possible explanation for the recently proposed resonant shattering mechanism [D. Tsang et al., Phys. Rev. Lett. 108, 011102 (2012)] causing the intense short gamma ray burst phenomenon, in which release of ?10{sup 46}–10{sup 47} ergs would be possible from the surface. The resonant shattering of the crust in a neutron star has been previously attributed to the crust-core interface mode and the tidal surface tensions. We believe that current model can be a more natural explanation for the energy liberation by solitonic activities on the neutron star surfaces, without a requirement for external mergers like other neutron stars or black holes for the crustal shatter.

Akbari-Moghanjoughi, M. [Department of Physics, Faculty of Sciences, Azarbaijan Shahid Madani University, 51745-406 Tabriz (Iran, Islamic Republic of); International Centre for Advanced Studies in Physical Sciences and Institute for Theoretical Physics, Ruhr University Bochum, D-44780 Bochum (Germany)

2014-08-15T23:59:59.000Z

484

CEBAF Large Acceptance Spectrometer (CLAS) Physics Database  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

A username and password are required to access and search the entire database. However, the Overview page provides links to detailed data pages for each of the experiments available for public access. There are many experiments with data that the public can freely access.

485

Cyber Security Requirements for Risk Management  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Notice ensures that system owners consistently assess the threats to and vulnerabilities of systems in order to implement adequate security controls. The Notice will also ensure compliance with the requirements of DOE O 205.1, Department of Energy Cyber Security Management Program, dated 3-21-03, and protect DOE information and information systems from unauthorized access, use, disclosure, modification, or destruction. DOE N 205.15, dated 3/18/05, extends this directive until 3/18/06.

2004-02-19T23:59:59.000Z

486

Sandia National Laboratories: reduce platform size requirements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1developmentturbineredox-active perovskite oxideplatform size requirements Study

487

Automatic Stability Checking for Large Analog Circuits  

E-Print Network [OSTI]

breakpoints. However, this method suffers from extremely high time and memory complexity and thus cannot be scaled to very large analog circuits. In this research work, we first take an in-depth look at the loop finder algorithm so as to identify certain key...

Mukherjee, Parijat 1985-

2010-12-06T23:59:59.000Z

488

Calcium Dynamics in Large Neuronal Models  

E-Print Network [OSTI]

Chapter 6 Calcium Dynamics in Large Neuronal Models ERIK DE SCHUTTER and PAUL SMOLEN 6.1 Introduction Calcium is an important intracellular signaling molecule with rapid e ect on the kinetics of many active membrane model that includes Ca2+ dynamics, one is faced with a feedback loop: the Ca2+-activated

De Schutter, Erik

489

Aerodynamic beam generator for large particles  

DOE Patents [OSTI]

A new type of aerodynamic particle beam generator is disclosed. This generator produces a tightly focused beam of large material particles at velocities ranging from a few feet per second to supersonic speeds, depending on the exact configuration and operating conditions. Such generators are of particular interest for use in additive fabrication techniques.

Brockmann, John E. (Albuquerque, NM); Torczynski, John R. (Albuquerque, NM); Dykhuizen, Ronald C. (Albuquerque, NM); Neiser, Richard A. (Albuquerque, NM); Smith, Mark F. (Albuquerque, NM)

2002-01-01T23:59:59.000Z

490

Large scale structure of the Universe: Introduction  

E-Print Network [OSTI]

The changes of main paradigms on the structure and evolution of the Universe are reviewed. Two puzzles of the modern cosmology, the mean density of matter and the regularity of the Universe on large scales, as well as the possibility to solve these puzzles by the introduction of more complicated form of inflation, are discussed.

J. Einasto

1997-11-26T23:59:59.000Z

491

Dark Matter and Large Scale Structure  

E-Print Network [OSTI]

A review of the study of dark matter and large scale structure of the Universe at Tartu Observatory is given. Tartu astronomers have participated in this development, starting from Ernst "Opik and Grigori Kuzmin, and continuing with the present generation of astronomers. Our goal was to understand better the structure, origin and evolution of the Universe.

J. Einasto

2000-12-07T23:59:59.000Z

492

Adaptive Training for Large Vocabulary Continuous  

E-Print Network [OSTI]

Adaptive Training for Large Vocabulary Continuous Speech Recognition Kai Yu Hughes Hall College for the degree of Doctor of Philosophy #12;ii Summary In recent years, there has been a trend towards training is to train hidden Markov models (HMMs) on the whole data set as if all data comes from a single acoustic

Hain, Thomas

493

Large-N droplets in two dimensions  

E-Print Network [OSTI]

Using lattice effective field theory, we study the ground state binding energy of N distinct particles in two dimensions with equal mass interacting weakly via an attractive SU(N)-symmetric short range potential. We find that in the limit of zero range and large N, the ratio of binding energies B_{N}/B_{N-1} approaches the value 8.3(6).

Dean Lee

2006-05-15T23:59:59.000Z

494

Prospective Climate Change Impact on Large Rivers  

E-Print Network [OSTI]

.g. long-term trends could affect hydropower, ecosystems and aquatic species...). 1917 2005 Athabasca; #12;4 Reduced Water Supply from Reservoirs Climate Change Issues in the US 1. Rainfall vs Snowmelt; 21 Prospective Climate Change Impact on Large Rivers in the US and South Korea Pierre Y. Julien Dept

Julien, Pierre Y.

495

Analysis of large soil samples for actinides  

SciTech Connect (OSTI)

A method of analyzing relatively large soil samples for actinides by employing a separation process that includes cerium fluoride precipitation for removing the soil matrix and precipitates plutonium, americium, and curium with cerium and hydrofluoric acid followed by separating these actinides using chromatography cartridges.

Maxwell, III; Sherrod L. (Aiken, SC)

2009-03-24T23:59:59.000Z

496

Laser Power Meter Large, bright, backlit LCD  

E-Print Network [OSTI]

Laser Power Meter FEATURES · Large, bright, backlit LCD display · Digital accuracy with analog-like movement for laser tuning · Works with thermopile and optical sensors · Intuitive button-driven user COMPATIBILITY · PowerMax® thermal sensors · Optical sensors FieldMaxII-TO Coherent Laser Measurement and Control

Woodall, Jerry M.

497

7, 1553315563, 2007 Large-scale  

E-Print Network [OSTI]

the Pacific, correlations with CO, CO2, CH4, and C2Cl4 were dif- fuse overall, but recognizable on flights out Chemistry and Physics Discussions Factors influencing the large-scale distribution of Hg in the Mexico City the Intercontinental Chemical Transport Experiment Phase B (INTEX-B) cam- paign in spring 2006. Flights were conducted

Paris-Sud XI, Université de

498

NERSC/DOE BER Requirements Workshop Participants  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challengeMultiscaleLogos NERSC LogosAttendees Attendees Large

499

Biological and Environmental Research Network Requirements  

SciTech Connect (OSTI)

The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the U.S. Department of Energy (DOE) Office of Science (SC), the single largest supporter of basic research in the physical sciences in the United States. In support of SC programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet be a highly successful enabler of scientific discovery for over 25 years. In November 2012, ESnet and the Office of Biological and Environmental Research (BER) of the DOE SC organized a review to characterize the networking requirements of the programs funded by the BER program office. Several key findings resulted from the review. Among them: 1) The scale of data sets available to science collaborations continues to increase exponentially. This has broad impact, both on the network and on the computational and storage systems connected to the network. 2) Many science collaborations require assistance to cope with the systems and network engineering challenges inherent in managing the rapid growth in data scale. 3) Several science domains operate distributed facilities that rely on high-performance networking for success. Key examples illustrated in this report include the Earth System Grid Federation (ESGF) and the Systems Biology Knowledgebase (KBase). This report expands on these points, and addresses others as well. The report contains a findings section as well as the text of the case studies discussed at the review.

Dart, Eli; Tierney, Brian

2013-09-01T23:59:59.000Z

500

Environmental quality indexing of large industrial development alternatives using AHP  

SciTech Connect (OSTI)

Two industrial development alternatives have been proposed for the East Coast of Iceland in order to strengthen its socio-economic basis. The favoured option is to build a large aluminium smelter, which requires massive hydropower development in the nearby highlands. Another viable option is the construction of a 6-million-ton oil refinery, following the planned exploitation of the Timan Pechora oil reserves in the Russian Arctic. A third 'fictitious' alternative could be general development of existing regional industry and new knowledge-based industries, development of ecotourism, establishment of national parks, accompanied by infrastructure improvement (roads, tunnels, communications, schools, etc.). The three alternatives will have different environmental consequences. The controversial hydropower plant for the smelter requires a large water reservoir as well as considerable land disturbance in this unique mountain territory, considered to be the largest uninhabited wilderness in Western Europe. The aluminium smelter and the oil refinery will give rise to substantial increase of the greenhouse gas (GHG) emissions of the country (about 20%). Then there is potential environmental risk associated with the refinery regarding oil spills at sea, which could have disastrous impact on the fisheries industry. However, the oil refinery does not require any hydropower development, which is a positive factor. Finally, the third alternative could be defined as a ''green'' solution whereby the detrimental environmental consequences of the two industrial solutions are mostly avoided. In order to compare the three alternatives in an orderly manner, the analytic hierarchy process methodology of Saaty was applied to calculate the environmental quality index of each alternative, which is defined as a weighted sum of selected environmental and socio-economic factors. These factors are evaluated on a comparison basis, applying the AHP methodology, and the weights in the quality index summation are estimated in the same manner. Six persons with different backgrounds were asked to fill in the comparison matrices in order to reduce bias in the evaluation. The final results show that the two industrial alternatives come out poorly, i.e. with low quality indices, whereas the third pseudo-alternative, i.e. general development, with a considerably higher quality index, is certainly worth a further study.

Solnes, Julius

2003-05-01T23:59:59.000Z