Sample records for required areas baltimore

  1. EIS-0002: Allocation of Petroleum Feedstock, Baltimore Gas & Electric Co., Sollers Point SNG Plant, Sollers Point, Baltimore County, MD

    Broader source: Energy.gov [DOE]

    The Economic Regulatory Administration (ERA) developed this EIS to evaluate the social, economic and environmental impacts which may occur within the Baltimore Gas and Electric Company (BG&E) service area as a result of the ERA' s proposed decision to allocate up to 2,186,000 barrels per year of naphtha feedstock to BG&E to operate BG&E's existing synthetic natural gas facility located on Sollers Point in Baltimore County, Maryland.

  2. Baltimore Vet Cuts Energy Bills With Solar | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Baltimore Vet Cuts Energy Bills With Solar Baltimore Vet Cuts Energy Bills With Solar October 28, 2010 - 5:09pm Addthis Baltimore resident Paul Bennett installed 14 solar panels...

  3. Capacity Requirements to Support Inter-Balancing Area Wind Delivery

    SciTech Connect (OSTI)

    Kirby, B.; Milligan, M.

    2009-07-01T23:59:59.000Z

    Paper examines the capacity requirements that arise as wind generation is integrated into the power system and how those requirements change depending on where the wind energy is delivered.

  4. PHYSICS DIVISION ESH BULLETIN 2008-1 Access Requirements for HRIBF Controlled-Entry Areas

    E-Print Network [OSTI]

    beam is present: · Dosimeters are always required in Building 6000. · Facility-specific training (Building 6000 Access Training) is required for unescorted access to Building 6000. · Facility-specific training (HRIBF Radiological Safety) is required for unescorted access to HRIBF Controlled-Entry Areas when

  5. Clinical Research Billing University of Maryland Baltimore

    E-Print Network [OSTI]

    Weber, David J.

    Clinical Research Billing Compliance University of Maryland Baltimore Office of Research & Development Center for Clinical Trials #12;Objectives The Objectives of this Training are to: · Increase your understanding of the regulatory and financial issues associated with clinical research billing · Discuss key

  6. Prediction of Regulation Reserve Requirements in California ISO Control Area based on BAAL Standard

    SciTech Connect (OSTI)

    Etingov, Pavel V.; Makarov, Yuri V.; Samaan, Nader A.; Ma, Jian; Loutan, Clyde

    2013-07-21T23:59:59.000Z

    This paper presents new methodologies developed at Pacific Northwest National Laboratory (PNNL) to estimate regulation capacity requirements in the California ISO control area. Two approaches have been developed: (1) an approach based on statistical analysis of actual historical area control error (ACE) and regulation data, and (2) an approach based on balancing authority ACE limit control performance standard. The approaches predict regulation reserve requirements on a day-ahead basis including upward and downward requirements, for each operating hour of a day. California ISO data has been used to test the performance of the proposed algorithms. Results show that software tool allows saving up to 30% on the regulation procurements cost .

  7. Baltimore Gas and Electric Company (Electric)- Commercial Energy Efficiency Program

    Broader source: Energy.gov [DOE]

    Baltimore Gas and Electric (BGE) provides incentives for technical assistance, retrofitting inefficient equipment, starting a new construction project, launching a major renovation, purchasing new...

  8. Focus Area Tax Credits (Maryland)

    Broader source: Energy.gov [DOE]

    Focus Area Tax Credits for businesses in Baltimore City or Prince George’s County enterprise zones include: (1) Ten-year, 80% credit against local real property taxes on a portion of real property...

  9. Tire recovery: Baltimore firm seeks solution

    SciTech Connect (OSTI)

    Greenhut, S.

    1985-12-01T23:59:59.000Z

    Several U.S. companies are recycling tires on a large scale. The tires usually are shredded and sold as a fuel supplement, as an additive to new rubber products, or as a component of road surfaces. Examples of successful tire recycling operations reveal the diverse processing and marketing strategies employed by six companies. The experiences of one hauler in Baltimore, MD, concerning scrap tire transport, shredding, and marketing are summarized.

  10. Baltimore residential assistance demonstration project: Final report

    SciTech Connect (OSTI)

    NONE

    1998-09-01T23:59:59.000Z

    At the request of the City of Baltimore for assistance in developing the Global Action Plan (GAP) EcoTeam Program, DOE Office of Energy Efficiency and Renewable Energy provided GAP with $10,000 for a one-year demonstration project. The results of this action are as follows: four EcoTeams were established representing 28 households and 47 people; the self reported resource savings to date per household are on average: energy savings--9%, auto emission reduction--16%, solid waste reduction--52%, water savings--25%, dollar savings--$174; the initial seed team (prior to this funding) replicated and started 2 new teams, one of those teams replicated and started 2 more teams, the other team did not replicate; 4 volunteer coaches were recruited to coach each of these teams; a volunteer coordinator was recruited to provide local guidance for this demonstration project and help GAP reach out to the Fairfield low-income neighborhood, the volunteer coordinator was unable to establish any EcoTeams in this neighborhood as their priorities were establishing a neighborhood action team and addressing immediate health-related environmental issues; the volunteers have communicated information about this demonstration project among many community and Baltimore government leaders to solicit support for a full campaign and to assess the level of that support.

  11. Plutonium Surveillance Destructive Examination Requirements at Savannah River National Laboratory for K-Area Interim Surveillance

    SciTech Connect (OSTI)

    Stefek, T. M.

    2005-09-29T23:59:59.000Z

    The DOE 3013 storage standard requires nested, welded 300 series stainless steel containers to store plutonium-bearing materials for up to 50 years. Packaged contents include stabilized plutonium-bearing residues that contain chloride salts and a low (< 0.5 weight %) water content. The DOE 3013 STD requires surveillance of the packages over the 50 year lifetime. These surveillance requirements have been further defined by the Integrated Surveillance Program to include both non-destructive examination (NDE) and destructive examination (DE) of the 3013 container. The DE portion of surveillance involves examining the 3013 nested containers, analyzing the head space gas, and evaluating the plutonium oxide chemistry. At SRS, the stored 3013 containers will undergo preparation for the DE surveillance activities in facilities located in K-Area. The actual DE surveillance will be performed in SRNL. This report provides preliminary functional requirements for the destructive examination (DE) of plutonium-bearing oxide materials and containers in support of K-Area Interim Surveillance (KIS). The KIS project will install interim facilities to prepare the samples for analysis in SRNL. This document covers the requirements for the interim period beginning in 2007, and lasting until the Container Storage and Surveillance Capability (CSSC) project provides the permanent facilities in K-Area to perform sampling and repackaging operations associated with the 3013 container storage and surveillance program. Initial requirements for the CSSC project have been previously defined in WSRC-TR-2004-00584 ''Plutonium Surveillance Destructive Examination Requirements at Savannah River National Laboratory''. As part of the Plutonium Surveillance Program of 3013 Containers at the Savannah River Site (SRS), the Savannah River National Laboratory (SRNL) will receive the emptied 3013 container components, plutonium oxide samples and headspace gas samples from K-Area. The DE program scope includes chemical and metallurgical analyses for a maximum of 25 DE sets a year to provide essential data in support of the SRS Plutonium Surveillance Program. The normal operation is expected to be approximately 15 DE sets a year.

  12. Functional requirements of the borrow area and haul route for the Waste Area Grouping projects at Oak Ridge National Laboratory, Oak Ridge, Tennessee

    SciTech Connect (OSTI)

    Miller, D.G.

    1992-09-01T23:59:59.000Z

    This report describes the mission and functional requirements for the development of a borrow area and the associated haul route to support closure and/or remediation of Waste Area Grouping (WAG) 6 and other WAGs at Oak Ridge National Laboratory. This document specifies the basic functional requirements that must be met by the borrow area and haul route developed to produce low-permeability soil for the covers or caps at WAG 6.

  13. Baltimore County- Property Tax Credit for Solar and Geothermal Devices

    Broader source: Energy.gov [DOE]

    The state of Maryland permits local governments (Md Code: Property Tax § 9-203) to offer property tax credits for energy conservation devices if they choose to do so. In November 2010 Baltimore C...

  14. NBP RFI: Communications Requirements- Comments of Baltimore Gas & Electric

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2:Introduction toManagement of theTechno-economic Evaluation of theSafetyItDepartment

  15. Spatial Analysis of Residential Development and Urban-Rural Zoning in Baltimore County, Maryland

    E-Print Network [OSTI]

    Griffin, Alexander C.

    2011-10-21T23:59:59.000Z

    Over the past half-century, Baltimore County, Maryland has experienced various policy measures that have shaped development patterns. This thesis analyzes three spatially explicit parcel-level models of residential development in Baltimore County...

  16. The systems approach to airport security: The FAA (Federal Aviation Administration)/BWI (Baltimore-Washington International) Airport demonstration project

    SciTech Connect (OSTI)

    Caskey, D.L.; Olascoaga, M.T.

    1990-01-01T23:59:59.000Z

    Sandia National Laboratories has been involved in designing, installing and evaluating security systems for various applications during the past 15 years. A systems approach to security that evolved from this experience was applied to aviation security for the Federal Aviation Administration. A general systems study of aviation security in the United States was concluded in 1987. One result of the study was a recommendation that an enhanced security system concept designed to meet specified objectives be demonstrated at an operational airport. Baltimore-Washington International Airport was selected as the site for the demonstration project which began in 1988 and will be completed in 1992. This article introduced the systems approach to airport security and discussed its application at Baltimore-Washington International Airport. Examples of design features that could be included in an enhanced security concept also were presented, including details of the proposed Ramps Area Intrusion Detection System (RAIDS).

  17. HAZARDOUS WASTE SATELLITE ACCUMULATION AREA REQUIREMENTS 1. Mark all waste containers conspicuously with the words "Hazardous Waste."

    E-Print Network [OSTI]

    Slatton, Clint

    HAZARDOUS WASTE SATELLITE ACCUMULATION AREA REQUIREMENTS 1. Mark all waste containers conspicuously. Decontaminate 5. Dispose of cleanup debris as Hazardous Waste Chemical Spill ­ major 1. Evacuate area, isolate with the words "Hazardous Waste." 2. Label all containers accurately, indicating the constituents and approximate

  18. Baltimore Gas and Electric Company (Electric)- Residential Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    The Baltimore Gas and Electric Company (BGE) offers rebates for residential customers to improve the energy efficiency of eligible homes. Rebates are available for Energy Star clothes washers,...

  19. Spent Fuel Transportation Package Response to the Baltimore Tunnel Fire Scenario

    SciTech Connect (OSTI)

    Adkins, Harold E.; Cuta, Judith M.; Koeppel, Brian J.; Guzman, Anthony D.; Bajwa, Christopher S.

    2006-11-15T23:59:59.000Z

    On July 18, 2001, a freight train carrying hazardous (non-nuclear) materials derailed and caught fire while passing through the Howard Street railroad tunnel in downtown Baltimore, Maryland. The United States Nuclear Regulatory Commission (USNRC), one of the agencies responsible for ensuring the safe transportation of radioactive materials in the United States, undertook an investigation of the train derailment and fire to determine the possible regulatory implications of this particular event for the transportation of spent nuclear fuel by railroad. Shortly after the accident occurred, the USNRC met with the National Transportation Safety Board (NTSB, the U.S. agency responsible for determining the cause of transportation accidents), to discuss the details of the accident and the ensuing fire. Following these discussions, the USNRC assembled a team of experts from the National Institute of Standards and Technology (NIST), the Center for Nuclear Waste Regulatory Analyses (CNWRA), and Pacific Northwest National Laboratory (PNNL) to determine the thermal conditions that existed in the Howard Street tunnel fire and analyze the effects of this fire on various spent fuel transportation package designs. The Fire Dynamics Simulator (FDS) code, developed by NIST, was used to determine the thermal environment present in the Howard Street tunnel during the fire. The FDS results were used as boundary conditions in the COBRA-SFS and ANSYS® computer codes to evaluate the thermal performance of different package designs. The staff concluded that larger transportation packages resembling the HOLTEC Model No. HI STAR 100 and TransNuclear Model No. TN-68 would withstand a fire with thermal conditions similar to those that existed in the Baltimore tunnel fire event with only minor damage to peripheral components. This is due to their sizable thermal inertia and design specifications in compliance with currently imposed regulatory requirements. The staff also concluded that some components of smaller transportation packages resembling the NAC Model No. LWT, despite placement within an ISO container, could degrade. USNRC staff evaluated the radiological consequences of the package responses to the Baltimore tunnel fire. Though components in some packages heated up beyond their service temperatures, the staff determined that there would be no significant dose as a result of the fire for any of these and similar packages.

  20. National Ignition Facility subsystem design requirements laser {ampersand} target area building (LTAB) SSDR 1.2.2.1

    SciTech Connect (OSTI)

    Kempel, P.; Hands, J.

    1996-08-19T23:59:59.000Z

    This Subsystem Design Requirements (SSDR) document establishes the performance, design, and verification requirements for the conventional building systems and subsystems of the Laser and Target Area Building (LTAB), including those that house and support the operation of high-energy laser equipment and the operational flow of personnel and materials throughout the facility. This SSDR addresses the following subsystems associated with the LTAB: Building structural systems for the Target Bay, Switchyards, Diagnostic Building, Decontamination Area, Laser Bays, Capacitor Bays and Operations Support Area, and the necessary space associated with building-support equipment; Architectural building features associated with housing the space and with the operational cleanliness of the functional operation of the facilities; Heating, Ventilating, and Air Conditioning (HVAC) systems for maintaining a clean and thermally stable ambient environment within the facilities; Plumbing systems that provide potable water and sanitary facilities for the occupants, plus stormwater drainage for transporting rainwater; Fire Protection systems that guard against fire damage to the facilities and their contents; Material handling systems for transporting personnel and heavy materials within the building areas; Mechanical process piping systems for liquids and gases that provide cooling and other service to experimental laser equipment and components; Electrical power and grounding systems that provide service and standby power to building and experimental equipment, including lighting distribution and communications systems for the facilities; Instrumentation and control systems that ensure the safe operation of conventional facilities systems, such as those listed above. Detailed requirements for building subsystems that are not addressed in this document (such as specific sizes, locations, or capacities) are included in detail-level NIP Project Interface Control Documents (ICDS).

  1. Comments of Baltimore Gas & Electric Company | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613PortsmouthBartlesville EnergyDepartment. CashDay-June 22, 2015 |atfrom theBaltimore Gas

  2. Comments of Baltimore Gas & Electric Company | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"Wave the WhiteNational Broadband Plan byComments of Baltimore Gas &

  3. North Baltimore, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer PlantMunhall,Missouri: Energy Resources JumpOklahoma: EnergyBaltimore, Ohio: Energy

  4. Baltimore Gas & Electric Co | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovation in Carbon CaptureAtriaPower Systems Jump to:Baltimore Gas &

  5. Baltimore Gas & Electric Co | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovation in Carbon CaptureAtriaPower Systems Jump to:Baltimore Gas

  6. The Baltimore and Utrecht models for cluster dissolution

    E-Print Network [OSTI]

    Henny J. G. L. M. Lamers

    2008-04-14T23:59:59.000Z

    The analysis of the age distributions of star cluster samples of different galaxies has resulted in two very different empirical models for the dissolution of star clusters: the Baltimore model and the Utrecht model. I describe these two models and their differences. The Baltimore model implies that the dissolution of star clusters is mass independent and that about 90% of the clusters are destroyed each age dex, up to an age of about a Gyr, after which point mass-dependent dissolution from two-body relaxation becomes the dominant mechanism. In the Utrecht model, cluster dissolution occurs in three stages: (i) mass-independent infant mortality due to the expulsion of gas up to about 10 Myr; (ii) a phase of slow dynamical evolution with strong evolutionary fading of the clusters lasting up to about a Gyr; and (iii) a phase dominated by mass dependent-dissolution, as predicted by dynamical models. I describe the cluster age distributions for mass-limited and magnitude-limited cluster samples for both models. I refrain from judging the correctness of these models.

  7. Baltimore Gas and Electric Company- Home Performance with Energy Star Rebates

    Broader source: Energy.gov [DOE]

    The Baltimore Gas and Electric Company (BG&E) offers the Home Performance with Energy Star Program that provides incentives for residential customers who have audits performed by participating...

  8. Baltimore Gas and Electric Company (Gas)- Residential Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    The Baltimore Gas and Electric Company (BGE) offers the Smart Energy Savers Program for residential natural gas customers to improve the energy efficiency of eligible homes. Rebates are available...

  9. University of Maryland Baltimore County, Department of Geography and Environmental Systems

    E-Print Network [OSTI]

    Maryland, Baltimore County, University of

    (e.g. Geography, Environmental Science, Conservation Science, Ecology, Natural, environmental history, political ecology, resource conservation, and environmental policy and Environmental Systems Department Chair http://ges.umbc.edu Maryland, Baltimore 21250

  10. Baltimore County- Property Tax Credit for High Performance Buildings and Homes

    Broader source: Energy.gov [DOE]

    The state of Maryland permits local governments (Md Code: Property Tax § 9-242) to offer property tax credits for high performance buildings if they choose to do so. Baltimore County exercised this...

  11. Listed below are specific requirements to review for those areas that generate and/or store hazardous waste as applicable

    E-Print Network [OSTI]

    Movileanu, Liviu

    hazardous waste as applicable: 1) The work area generating hazardous waste must be under the control) The hazardous waste Satellite Accumulation Area (SAA) is: A) located at or near the point of generation (where accumulation area is clearly marked as "Hazardous Waste Satellite Accumulation Area". 4) The accumulation area

  12. Updated 3.2013 Candidates are required to choose a concentration of 12 credits in one curriculum area or a teaching minor for the elementary education

    E-Print Network [OSTI]

    Vonessen, Nikolaus

    Updated 3.2013 Candidates are required to choose a concentration of 12 credits in one curriculum area or a teaching minor for the elementary education degree. All 12 credits of the concentration must Education. (See back.) *Courses for this block are co-requisites; they must be taken simultaneously

  13. Supplemental Requirements for the Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C., Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-10-19T23:59:59.000Z

    The Notice supplements review and approval requirements of DOE O 350.2A, Use of Management and Operating (M&O) or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C., Area, dated 10-29-03.

  14. HOPKINS, UNIVERSITY OF MD, BALTIMORE FACULTY RESEARCHERS WIN 2014 BIOMARYLAND LIFE PRIZES

    E-Print Network [OSTI]

    Weber, David J.

    ,000 grants help further research, bring new discoveries to commercial market BALTIMORE, MD (February 19, 2014 for her development of a blood test for the early detection of pancreatic cancer. #12;The LIFE prize the funding to develop technology that will aid in the safer delivery of radiation therapy. Previous winners

  15. ASPRS 2005 Annual Conference Baltimore, Maryland March 7-11, 2005

    E-Print Network [OSTI]

    for further geospatial visualization and analysis, GWSC supports to build, instantiate, execute and registerASPRS 2005 Annual Conference Baltimore, Maryland March 7-11, 2005 GEOSPATIAL WEB SERVICE CLIENT@gmu.edu yxdeng_98@yahoo.com ldi@gmu.edu ABSTRACT This Geospatial Web Service Client (GWSC) provides

  16. Mesozoic sedimentary rock features resulting from volume movements required in drape folds at corners of basement blocks--Casper Mountain Area, Wyoming

    E-Print Network [OSTI]

    Vaughn, Patty Holyfield

    1976-01-01T23:59:59.000Z

    environment resulted in 700 feet of varicolored shale and sandstone of Jurassic age which lie unconformably upon the Triassic rocks. During Cretaceous time 5, 000 feet of marine sandstone and shale were deposited unconformably on tne Jurassic sediments...MESOZOIC SEDIMENTARY ROCK FEATURES RESULTING FROM VOLUME MOVEMENTS REQUIRED IN DRAPE FOLDS AT CORNERS OF BASEMENT BIOCKS ? CASPER MOUNTAIN AREA, MYOMING A Thesis by PATTY HOLYFIELD VAUGHN Submitted to the Graduate College of Texas A...

  17. Steps to Take in Locating Off-Campus Housing in Baltimore 1. Access the JHMI Housing Office website www.hopkinsmedicine.org/housing

    E-Print Network [OSTI]

    von der Heydt, Rüdiger

    Steps to Take in Locating Off-Campus Housing in Baltimore 1. Access the JHMI Housing Office website www.hopkinsmedicine.org/housing Pull up the off-campus housing section to familiarize yourself the Housing Office for updated lists of Baltimore Apartment Complexes popular with Hopkins students

  18. Proceedings: 2002 Radiation Protection Technology Conference: Baltimore, MD, October 2002

    SciTech Connect (OSTI)

    None

    2003-04-01T23:59:59.000Z

    In response to program pressures resulting from shorter outages, combined with a diminishing group of contract health physics (HP) technicians, HP professionals must continuously upgrade their programs. Demanding emergent work also requires HP technicians in the nuclear industry to use new methods and technologies. The EPRI Radiation Protection Technology Conference was directed at highlighting a number of key health physics issues and developments.

  19. portal: Libraries and the Academy, Vol. 9, No. 2 (2009), pp. 273286. Copyright 2009 by The Johns Hopkins University Press, Baltimore, MD 21218.

    E-Print Network [OSTI]

    Oakleaf, Megan

    2009-01-01T23:59:59.000Z

    by The Johns Hopkins University Press, Baltimore, MD 21218. INFORMATION STANDARDS Guiding Questions the information literacy assessments that best fit their needs. #12;Guiding Questions forAssessing Information

  20. Nov. 5, 2003 1Soon Cho_AVS 50th International Symposium (Baltimore) RealReal--Time InTime In--Situ Chemical Sensing inSitu Chemical Sensing in

    E-Print Network [OSTI]

    Rubloff, Gary W.

    Circuit HFET can play a role in: · Power amplifiers · Low noise amplifiers · Mixers · Multipliers #12;Nov electronic applications #12;Nov. 5, 2003 3Soon Cho_AVS 50th International Symposium (Baltimore) Ga. 5, 2003 4Soon Cho_AVS 50th International Symposium (Baltimore) GaN Heterostructure Design Crystal

  1. In-Situ Radiological Surveys to Address Nuclear Criticality Safety Requirements During Remediation Activities at the Shallow Land Disposal Area, Armstrong County, Pennsylvania - 12268

    SciTech Connect (OSTI)

    Norris, Phillip; Mihalo, Mark; Eberlin, John; Lambert, Mike [Cabrera Services (United States); Matthews, Brian [Nuclear Safety Associates (United States)

    2012-07-01T23:59:59.000Z

    Cabrera Services Inc. (CABRERA) is the remedial contractor for the Shallow Land Disposal Area (SLDA) Site in Armstrong County Pennsylvania, a United States (US) Army Corps of Engineers - Buffalo District (USACE) contract. The remediation is being completed under the USACE's Formerly Utilized Sites Remedial Action Program (FUSRAP) which was established to identify, investigate, and clean up or control sites previously used by the Atomic Energy Commission (AEC) and its predecessor, the Manhattan Engineer District (MED). As part of the management of the FUSRAP, the USACE is overseeing investigation and remediation of radiological contamination at the SLDA Site in accordance with the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), 42 US Code (USC), Section 9601 et. seq, as amended and, the National Oil and Hazardous Substance Pollution Contingency Plan (NCP), Title 40 of the Code of Federal Regulations (CFR) Section 300.430(f) (2). The objective of this project is to clean up radioactive waste at SLDA. The radioactive waste contains special nuclear material (SNM), primarily U-235, in 10 burial trenches, Cabrera duties include processing, packaging and transporting the waste to an offsite disposal facility in accordance with the selected remedial alternative as defined in the Final Record of Decision (USACE, 2007). Of particular importance during the remediation is the need to address nuclear criticality safety (NCS) controls for the safe exhumation and management of waste containing fissile materials. The partnership between Cabrera Services, Inc. and Measutronics Corporation led to the development of a valuable survey tool and operating procedure that are essential components of the SLDA Criticality Safety and Material Control and Accountability programs. Using proven existing technologies in the design and manufacture of the Mobile Survey Cart, the continued deployment of the Cart will allow for an efficient and reliable methodology to allow for the safe exhumation of the Special Nuclear Material in existing SLDA trenches. (authors)

  2. September 27 29, 2010, Baltimore Convention Center Focusing on Emerging Automation Specifications and Use Cases, Software Assurance, Healthcare IT, Cyber Security, and Regulatory Compliance

    E-Print Network [OSTI]

    September 27 ­ 29, 2010, Baltimore Convention Center Focusing on Emerging Automation Specifications Annual IT Security Automation Conference, hosted by the National Institute of Standards and Technology Systems Agency, will focus on the breadth and depth of automation principles and technologies designed

  3. Aquifer Protection Area Land Use Regulations (Connecticut)

    Broader source: Energy.gov [DOE]

    These regulations describe allowable activities within aquifer protection areas, the procedure by which such areas are delineated, and relevant permit requirements. The regulations also describe...

  4. Superfund Record of Decision (EPA Region 3): Kane and Lombard Site, Baltimore, Maryland (first remedial action), September 1987. Final report

    SciTech Connect (OSTI)

    Not Available

    1987-09-30T23:59:59.000Z

    The Kane and Lombard site is an 8.4-acre parcel of undeveloped land in Baltimore, Maryland. Dumping and burning of construction debris, domestic trash, and drums occurred at the site from 1962 until 1967 when the city passed an ordinance prohibiting the open burning of refuse. Illegal dumping continued from 1967 until approximately 1984, during which time many citations were issued for illegal burning on the property. In 1980, Maryland State inspectors observed between 400 and 500 drums, the majority of which were rusted, damaged and contained holes. Following an onsite property assessment, EPA authorized the immediate removal of 1,163 drums in 1984. Of those, 822 drums were classified as empty and 341 drums contained contaminants which included: benzene, toluene, xylene, PAHs, PCBs, and heavy metals. Approximately six inches of soil below the drums were removed and disposed offsite. The site was stabilized by regrading, capping and revegetation. Currently, soil and ground water are contaminated with these prior drum contaminants.

  5. Decontamination & decommissioning focus area

    SciTech Connect (OSTI)

    NONE

    1996-08-01T23:59:59.000Z

    In January 1994, the US Department of Energy Office of Environmental Management (DOE EM) formally introduced its new approach to managing DOE`s environmental research and technology development activities. The goal of the new approach is to conduct research and development in critical areas of interest to DOE, utilizing the best talent in the Department and in the national science community. To facilitate this solutions-oriented approach, the Office of Science and Technology (EM-50, formerly the Office of Technology Development) formed five Focus AReas to stimulate the required basic research, development, and demonstration efforts to seek new, innovative cleanup methods. In February 1995, EM-50 selected the DOE Morgantown Energy Technology Center (METC) to lead implementation of one of these Focus Areas: the Decontamination and Decommissioning (D & D) Focus Area.

  6. Security Area Vouching and Piggybacking

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-06-05T23:59:59.000Z

    Establishes requirements for the Department of Energy (DOE) Security Area practice of "vouching" or "piggybacking" access by personnel. DOE N 251.40, dated 5-3-01, extends this directive until 12-31-01.

  7. Biosafety Facilities - DOE Directives, Delegations, and Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    G 151.1-5, Biosafety Facilities by David Freshwater Functional areas: Defense Nuclear Facility Safety and Health Requirement, Safety and Security, The Guide assists DOENNSA field...

  8. Personnel Security - DOE Directives, Delegations, and Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    72.2 Chg 1, Personnel Security by Mark Pekrul Functional areas: Personnel Security, Security, Human Capital The order establishes requirements that will enable DOE to operate a...

  9. NERSC/DOE NP Requirements Workshop Participants

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Large Scale Computing and Storage Requirements for Nuclear Physics May 26-27, 2011 Name Organization Area DOE Program Managers Ted Barnes DOE Office of Nuclear Physics Nuclear...

  10. Baltimore Harbor Chart 12281

    E-Print Network [OSTI]

    them into the Patuxent River. The American flotilla held the enemy at bay until August 21 when, facing

  11. Research Areas

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclear Press Releases 2014References by WebsitehomeResearch Areas

  12. Safety Software Quality Assurance Functional Area Qualification...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    72-2011, Safety Software Quality Assurance Functional Area Qualification Standard by Diane Johnson This SSQA FAQS identifies the minimum technical competency requirements for DOE...

  13. Fire Hazards Analysis for the 200 Area Interim Storage Area

    SciTech Connect (OSTI)

    JOHNSON, D.M.

    2000-01-06T23:59:59.000Z

    This documents the Fire Hazards Analysis (FHA) for the 200 Area Interim Storage Area. The Interim Storage Cask, Rad-Vault, and NAC-1 Cask are analyzed for fire hazards and the 200 Area Interim Storage Area is assessed according to HNF-PRO-350 and the objectives of DOE Order 5480 7A. This FHA addresses the potential fire hazards associated with the Interim Storage Area (ISA) facility in accordance with the requirements of DOE Order 5480 7A. It is intended to assess the risk from fire to ensure there are no undue fire hazards to site personnel and the public and to ensure property damage potential from fire is within acceptable limits. This FHA will be in the form of a graded approach commensurate with the complexity of the structure or area and the associated fire hazards.

  14. SRS control system upgrade requirements

    SciTech Connect (OSTI)

    Hill, L.F.

    1998-08-04T23:59:59.000Z

    This document defines requirements for an upgrade of the Sodium Removal System (SRS) control system. The upgrade is being performed to solve a number of maintainability and operability issues. The upgraded system will provide the same functions, controls and interlocks as the present system, and in addition provide enhanced functionality in areas discussed in this document.

  15. ASCR Science Network Requirements

    SciTech Connect (OSTI)

    Dart, Eli; Tierney, Brian

    2009-08-24T23:59:59.000Z

    The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the US Department of Energy Office of Science, the single largest supporter of basic research in the physical sciences in the United States. In support of the Office of Science programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 20 years. In April 2009 ESnet and the Office of Advanced Scientific Computing Research (ASCR), of the DOE Office of Science, organized a workshop to characterize the networking requirements of the programs funded by ASCR. The ASCR facilities anticipate significant increases in wide area bandwidth utilization, driven largely by the increased capabilities of computational resources and the wide scope of collaboration that is a hallmark of modern science. Many scientists move data sets between facilities for analysis, and in some cases (for example the Earth System Grid and the Open Science Grid), data distribution is an essential component of the use of ASCR facilities by scientists. Due to the projected growth in wide area data transfer needs, the ASCR supercomputer centers all expect to deploy and use 100 Gigabit per second networking technology for wide area connectivity as soon as that deployment is financially feasible. In addition to the network connectivity that ESnet provides, the ESnet Collaboration Services (ECS) are critical to several science communities. ESnet identity and trust services, such as the DOEGrids certificate authority, are widely used both by the supercomputer centers and by collaborations such as Open Science Grid (OSG) and the Earth System Grid (ESG). Ease of use is a key determinant of the scientific utility of network-based services. Therefore, a key enabling aspect for scientists beneficial use of high performance networks is a consistent, widely deployed, well-maintained toolset that is optimized for wide area, high-speed data transfer (e.g. GridFTP) that allows scientists to easily utilize the services and capabilities that the network provides. Network test and measurement is an important part of ensuring that these tools and network services are functioning correctly. One example of a tool in this area is the recently developed perfSONAR, which has already shown its usefulness in fault diagnosis during the recent deployment of high-performance data movers at NERSC and ORNL. On the other hand, it is clear that there is significant work to be done in the area of authentication and access control - there are currently compatibility problems and differing requirements between the authentication systems in use at different facilities, and the policies and mechanisms in use at different facilities are sometimes in conflict. Finally, long-term software maintenance was of concern for many attendees. Scientists rely heavily on a large deployed base of software that does not have secure programmatic funding. Software packages for which this is true include data transfer tools such as GridFTP as well as identity management and other software infrastructure that forms a critical part of the Open Science Grid and the Earth System Grid.

  16. Co-combustion of refuse derived fuel and coal in a cyclone furnace at the Baltimore Gas and Electric Company, C. P. Crane Station

    SciTech Connect (OSTI)

    Not Available

    1982-03-01T23:59:59.000Z

    A co-combustion demonstration burn of coal and fluff refuse-derived fuel (RDF) was conducted by Teledyne National and Baltimore Gas and Electric Company. This utility has two B and W cyclone furnaces capable of generating 400 MW. The facility is under a prohibition order to convert from No. 6 oil to coal; as a result, it was desirable to demonstrate that RDF, which has a low sulfur content, can be burned in combination with coals containing up to 2% sulfur, thus reducing overall sulfur emissions without deleterious effects. Each furnace consists of four cyclones capable of generating 1,360,000 pounds per hour steam. The tertiary air inlet of one of the cyclones was modified with an adapter to permit fluff RDF to be pneumatically blown into the cyclone. At the same time, coal was fed into the cyclone furnace through the normal coal feeding duct, where it entered the burning chamber tangentially and mixed with the RDF during the burning process. Secondary shredded fluff RDF was prepared by the Baltimore County Resource Recovery Facility. The RDF was discharged into a receiving station consisting of a belt conveyor discharging into a lump breaker, which in turn, fed the RDF into a pneumatic line through an air-lock feeder. A total of 2316 tons were burned at an average rate of 5.6 tons per hour. The average heat replacement by RDF for the cyclone was 25%, based on Btu input for a period of forty days. The range of RDF burned was from 3 to 10 tons per hour, or 7 to 63% heat replacement. The average analysis of the RDF (39 samples) for moisture, ash, heat (HHV) and sulfur content were 18.9%, 13.4%, 6296 Btu/lb and 0.26% respectively. RDF used in the test was secondary shredded through 1-1/2 inch grates producing the particle size distribution of from 2 inches to .187 inches. Findings to date after inspection of the boiler and superheater indicate satisfactory results with no deleterious effects from the RDF.

  17. Graduation Requirements and Procedures Graduation Requirements and

    E-Print Network [OSTI]

    /Degree Audit (DARS) or contact the department offering the major. Graduation Average Requirement The minimum

  18. Site Monitoring Area Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to the Site Monitoring Area (SMA) The Site Monitoring Area sampler Control measures (best management practices) installed at the Site Monitoring Area Structures such as...

  19. Wildlife Management Areas (Minnesota)

    Broader source: Energy.gov [DOE]

    Certain areas of the State are designated as wildlife protection areas and refuges; new construction and development is restricted in these areas.

  20. Wildlife Management Areas (Florida)

    Broader source: Energy.gov [DOE]

    Certain sites in Florida are designated as wildlife management areas, and construction and development is heavily restricted in these areas.

  1. Equipment Operational Requirements

    SciTech Connect (OSTI)

    Greenwalt, B; Henderer, B; Hibbard, W; Mercer, M

    2009-06-11T23:59:59.000Z

    The Iraq Department of Border Enforcement is rich in personnel, but poor in equipment. An effective border control system must include detection, discrimination, decision, tracking and interdiction, capture, identification, and disposition. An equipment solution that addresses only a part of this will not succeed, likewise equipment by itself is not the answer without considering the personnel and how they would employ the equipment. The solution should take advantage of the existing in-place system and address all of the critical functions. The solutions are envisioned as being implemented in a phased manner, where Solution 1 is followed by Solution 2 and eventually by Solution 3. This allows adequate time for training and gaining operational experience for successively more complex equipment. Detailed descriptions of the components follow the solution descriptions. Solution 1 - This solution is based on changes to CONOPs, and does not have a technology component. It consists of observers at the forts and annexes, forward patrols along the swamp edge, in depth patrols approximately 10 kilometers inland from the swamp, and checkpoints on major roads. Solution 2 - This solution adds a ground sensor array to the Solution 1 system. Solution 3 - This solution is based around installing a radar/video camera system on each fort. It employs the CONOPS from Solution 1, but uses minimal ground sensors deployed only in areas with poor radar/video camera coverage (such as canals and streams shielded by vegetation), or by roads covered by radar but outside the range of the radar associated cameras. This document provides broad operational requirements for major equipment components along with sufficient operational details to allow the technical community to identify potential hardware candidates. Continuing analysis will develop quantities required and more detailed tactics, techniques, and procedures.

  2. The requirements discovery process

    SciTech Connect (OSTI)

    Bahill, A.T. [Univ. of Arizona, Tucson, AZ (United States). Systems and Industrial Engineering; Dean, F.F. [Sandia National Lab., Albuquerque, NM (United States)

    1997-02-01T23:59:59.000Z

    Cost and schedule overruns are often caused by poor requirements that are produced by people who do not understand the requirement process. This paper provides a high-level overview of the requirements discovery process.

  3. BER Requirements Review 2015

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Attendees 2015 ASCR Requirements Review 2015 Previous Reviews Requirements Review Reports Case Studies News & Publications ESnet News Publications and Presentations Galleries ESnet...

  4. ASCR Requirements Review 2015

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Requirements Review 2015 ASCR Attendees 2015 Previous Reviews Requirements Review Reports Case Studies News & Publications ESnet News Publications and Presentations Galleries ESnet...

  5. Managing Imported Fire Ants in Urban Areas

    E-Print Network [OSTI]

    Drees, Bastiaan M.

    2006-08-17T23:59:59.000Z

    individual colonies may occur that require individual mound treatment. Properties that border untreated areas such as agricultural lands, water edges, flood plains and wilderness will likely have a continuous reinfes- tation of ant colonies unless...

  6. Types of Cost Estimates - DOE Directives, Delegations, and Requirement...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CURRENT DOE G 430.1-1 Chp 4, Types of Cost Estimates by John Makepeace Functional areas: Procurement, Project Management The chapter describes the estimates required on...

  7. 3. MATERIAL CERTIFICATIONS REQUIRED NO RADIOGRAPHY REQUIRED.

    E-Print Network [OSTI]

    McDonald, Kirk

    SHALL BE DYE PENETRANT INSPECTED. ASME SECTION IX. NO CODE STAMP REQUIRED. 1. WELDING TO BE PERFORMED is property of 1. ALL DIMENSIONS ARE IN INCHES 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M 3

  8. Western Area Power Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    29-30, 2011 2 Agenda * Overview of Western Area Power Administration * Post-1989 Loveland Area Projects (LAP) Marketing Plan * Energy Planning and Management Program * Development...

  9. Hydrologically Sensitive Areas: Variable Source Area Hydrology

    E-Print Network [OSTI]

    Walter, M.Todd

    Hydrologically Sensitive Areas: Variable Source Area Hydrology Implications for Water Quality Risk hydrology was developed and applied to the New York City (NYC) water supply watersheds. According and are therefore hydrologically sensitive with respect to their potential to transport contaminants to perennial

  10. FES Requirements Review 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Review 2014 FES Attendees 2014 BES Requirements Review 2014 Requirements Review Reports Case Studies Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638...

  11. BES Requirements Review 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Review 2014 BES Requirements Review 2014 BES Attendees 2014 Requirements Review Reports Case Studies Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638...

  12. AREA COORDINATOR RESIDENTIAL EDUCATION

    E-Print Network [OSTI]

    Bordenstein, Seth

    AREA COORDINATOR RESIDENTIAL EDUCATION VANDERBILT UNIVERSITY, NASHVILLE, TENNESSEE The Office of Housing and Residential Education at Vanderbilt University is seeking applicants for an Area Coordinator. The Area Coordinator is responsible for assisting in the management and operation of a residential area

  13. Allocating Reserve Requirements (Presentation)

    SciTech Connect (OSTI)

    Milligan, M.; Kirby, B.; King, J.

    2011-07-01T23:59:59.000Z

    This presentation provides an overview of present and possible future ways to allocate and assign benefits for reserve requirements.

  14. BER Science Network Requirements

    E-Print Network [OSTI]

    Dart, Eli

    2011-01-01T23:59:59.000Z

    Management and analysis of geospatial data involvingmanipulation, analysis, and display of geospatial data,Analysis and interpretation require mapping geospatial

  15. FES Science Network Requirements

    E-Print Network [OSTI]

    Geddes, Cameron Guy Robinson

    FES Science Network Requirements Report of the Fusion Energy Sciences Network Requirements Workshop Conducted March 13 and 14, 2008 #12;FES Science Network Requirements Workshop Fusion Energy Sciences Program Office, DOE Office of Science Energy Sciences Network Gaithersburg, MD ­ March 13 and 14, 2008 ESnet

  16. Nutritional requirements of sesame

    E-Print Network [OSTI]

    Eller, Joe C

    1958-01-01T23:59:59.000Z

    L)&RARYi ~st t~6~ 0F TEXACO NUTRITIONAL REQUIREMENTS OF SESAME A Thesis By JOE C. ELLER Submitted to the Graduate School of the Agricultural and Mechanical College of Texas in. partial fulfillment of the requirements for the degree of M... AS TER 0 F SCIENC E January 1958 Major Subject: Agronomy NUTRITIONAL REQUIREMENTS OF SESAME A Thesis JOE C. ELLER Approved. as to style and content by. ' Chairman of Committee Head qg Department January 1958 ACKNOWLEDGEMENT The author wishes...

  17. Innovation investment area: Technology summary

    SciTech Connect (OSTI)

    Not Available

    1994-03-01T23:59:59.000Z

    The mission of Environmental Management`s (EM) Office of Technology Development (OTD) Innovation Investment Area is to identify and provide development support for two types of technologies that are developed to characterize, treat and dispose of DOE waste, and to remediate contaminated sites. They are: technologies that show promise to address specific EM needs, but require proof-of-principle experimentation; and (2) already proven technologies in other fields that require critical path experimentation to demonstrate feasibility for adaptation to specific EM needs. The underlying strategy is to ensure that private industry, other Federal Agencies, universities, and DOE National Laboratories are major participants in developing and deploying new and emerging technologies. To this end, about 125 different new and emerging technologies are being developed through Innovation Investment Area`s (IIA) two program elements: RDDT&E New Initiatives (RD01) and Interagency Agreements (RD02). Both of these activities are intended to foster research and development partnerships so as to introduce innovative technologies into other OTD program elements for expedited evaluation.

  18. Wetland Preservation Areas (Minnesota)

    Broader source: Energy.gov [DOE]

    A wetland owner can apply to the host county for designation of a wetland preservation area. Once designated, the area remains designated until the owner initiates expiration, except where a state...

  19. RPAM & Energy Order Requirements

    Energy Savers [EERE]

    430.1C, Real Property Asset Management and DOE O 430.2B, Departmental Energy, Renewable Energy and Transportation Management Requirements, Overlap & Differences Office of...

  20. Required Annual Notices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Required Annual Notices The Women's Health and Cancer Rights Act of 1998 (WHCRA) The medical programs sponsored by LANS will not restrict benefits if you or your dependent...

  1. Transuranic Waste Requirements

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-09T23:59:59.000Z

    The guide provides criteria for determining if a waste is to be managed in accordance with DOE M 435.1-1, Chapter III, Transuranic Waste Requirements.

  2. Protected Areas Stacy Philpott

    E-Print Network [OSTI]

    Gottgens, Hans

    · Convention of Biological Diversity, 1992 #12;IUCN Protected Area Management Categories Ia. Strict Nature. Protected Landscape/ Seascape VI. Managed Resource Protected Area #12;Ia. Strict Nature Preserves and Ib. Wilderness Areas · Natural preservation · Research · No · No #12;II. National Parks · Ecosystem protection

  3. Service Entry Delivery Area

    E-Print Network [OSTI]

    New South Wales, University of

    Catheter Lab Boiler House Main Entry Short Street ChapelStreet Vehicle Exit 23. Gray Street Car ParkingService Entry Waste Handling Area Delivery Area Admissions Entrance Inquiries Desk Cafeteria Coffee in July 2000 Vehicle Entry Emergency Main Entrance TOKOGARAHRAILWAYSTATION LEGEND Areas under construction

  4. Areas of Specialization: 2014 Page 1 B.S. Degree in Electrical Engineering Areas of Specialization

    E-Print Network [OSTI]

    Piao, Daqing

    Areas of Specialization: 2014 Page 1 B.S. Degree in Electrical Engineering Areas of Specialization and B.S. Degree in Computer Engineering Requirements for Degree Plans School of Electrical and Computer This document provides enrollment guidance for all students in the School of Electrical and Computer Engineering

  5. General Responsibilities and Requirements

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-09T23:59:59.000Z

    The material presented in this guide provides suggestions and acceptable ways of implementing DOE M 435.1-1 and should not be viewed as additional or mandatory requirements. The objective of the guide is to ensure that responsible individuals understand what is necessary and acceptable for implementing the requirements of DOE M 435.1-1.

  6. GATEWAY PRESS, INC. Baltimore 1981

    E-Print Network [OSTI]

    Wachter, Kenneth W.

    , Ralph Thompson Sidman, of Binghamton, NY; Mrs. Bonny D. Virginia, of Solvay, NY; Mrs. Ted C. Masters

  7. Admission Requirements Contact/ Information

    E-Print Network [OSTI]

    Fernandez, Eduardo

    Areas: Hydrology and Water Resources, Urban Development and Sustainability and Cultural and Spatial attended. NOTE: If you attended one of the Florida State University System institutions, transcripts may be requested electronically. Supporting documentation: Supplemental applications, letters of recommendation

  8. Promulgating Nuclear Safety Requirements

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-05-15T23:59:59.000Z

    Applies to all Nuclear Safety Requirements Adopted by the Department to Govern the Conduct of its Nuclear Activities. Cancels DOE P 410.1. Canceled by DOE N 251.85.

  9. BES Science Network Requirements

    E-Print Network [OSTI]

    Dart, Eli

    2011-01-01T23:59:59.000Z

    the Directors of the Office of Science, Office of AdvancedOffice of Basic Energy Sciences. This is LBNL report LBNL-BES Science Network Requirements Report of the Basic Energy

  10. Timeline for Net Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    x By July 31 of each Forecast Year, BPA publishes all Load Following customers' Net Requirements data for the two years of the upcoming Rate Period. 17.6.1 7312010 Yes...

  11. Conditions Required by Law

    E-Print Network [OSTI]

    Khan, Javed I.

    No No Sto H 2 NoIs it required by law "Violence on children"?164.512 (c) (1) H CE may disclose to government to LEO HCE may not disclose to LEO H No Yes No Required by law: "reporting certain type of injuries"? H disclose to LEO H 164.512 (f) (1) (ii) (C)(2) It provides that the request is specific and limited in scope

  12. Requirements | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative JC3 RSS September 9,Award RecipientsActMission to ChinaRequirements Requirements

  13. Groundwater Management Areas (Texas)

    Broader source: Energy.gov [DOE]

    This legislation authorizes the Texas Commission on Environmental Quality and the Texas Water Development Board to establish Groundwater Management Areas to provide for the conservation,...

  14. Riparian Area. . . . . . . . . . . . . . . . . . . . Management Handbook

    E-Print Network [OSTI]

    Balasundaram, Balabhaskar "Baski"

    ..............................................................................................................19 Bruce Hoagland, Oklahoma Biological Survey and the University of Oklahoma Forest Management Riparian Area. . . . . . . . . . . . . . . . . . . . Management Handbook E-952 Oklahoma Cooperative . . . . . . . . . . . . . Oklahoma Conservation Commission Management Handbook #12

  15. 300 Area signal cable study

    SciTech Connect (OSTI)

    Whattam, J.W.

    1994-09-15T23:59:59.000Z

    This report was prepared to discuss the alternatives available for removing the 300 Area overhead signal cable system. This system, installed in 1969, has been used for various monitoring and communication signaling needs throughout the 300 Area. Over the years this cabling system has deteriorated, has been continually reconfigured, and has been poorly documented to the point of nonreliability. The first step was to look at the systems utilizing the overhead signal cable that are still required for operation. Of the ten systems that once operated via the signal cable, only five are still required; the civil defense evacuation alarms, the public address (PA) system, the criticality alarms, the Pacific Northwest Laboratory Facilities Management Control System (FMCS), and the 384 annunciator panel. Of these five, the criticality alarms and the FMCS have been dealt with under other proposals. Therefore, this study focused on the alternatives available for the remaining three systems (evacuation alarms, PA system, and 384 panel) plus the accountability aid phones. Once the systems to be discussed were determined, then three alternatives for providing the signaling pathway were examined for each system: (1) re-wire using underground communication ducts, (2) use the Integrated Voice/Data Telecommunications System (IVDTS) already installed and operated by US West, and (3) use radio control. Each alternative was developed with an estimated cost, advantages, and disadvantages. Finally, a recommendation was provided for the best alternative for each system.

  16. Geothermal br Resource br Area Geothermal br Resource br Area...

    Open Energy Info (EERE)

    Zone Mesozoic granite granodiorite Aurora Geothermal Area Aurora Geothermal Area Walker Lane Transition Zone Geothermal Region MW Beowawe Hot Springs Geothermal Area Beowawe Hot...

  17. 200 Area Deactivation Project Facilities Authorization Envelope Document

    SciTech Connect (OSTI)

    DODD, E.N.

    2000-03-28T23:59:59.000Z

    Project facilities as required by HNF-PRO-2701, Authorization Envelope and Authorization Agreement. The Authorization Agreements (AA's) do not identify the specific set of environmental safety and health requirements that are applicable to the facility. Therefore, the facility Authorization Envelopes are defined here to identify the applicable requirements. This document identifies the authorization envelopes for the 200 Area Deactivation.

  18. Nutrient Management Examination Competency Areas Individual Specialists

    E-Print Network [OSTI]

    Guiltinan, Mark

    Management: Soil Health 2. Understand how to use soil survey data and maps in nutrient management planning and experience relating to nutrient management planning and plan development. These competency areas function Management Act (Act 38): Who Is Affected? 3. Know the required components of a nutrient management plan

  19. Requirements Definition Stage

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-05-21T23:59:59.000Z

    This chapter addresses development of a Software Configuration Management Plan to track and control work products, analysis of the system owner/users' business processes and needs, translation of those processes and needs into formal requirements, and planning the testing activities to validate the performance of the software product.

  20. Requirements for Xenon International

    SciTech Connect (OSTI)

    Hayes, James C.; Ely, James H.

    2013-09-26T23:59:59.000Z

    This document defines the requirements for the new Xenon International radioxenon system. The output of this project will be a Pacific Northwest National Laboratory (PNNL) developed prototype and a manufacturer-developed production prototype. The two prototypes are intended to be as close to matching as possible; this will be facilitated by overlapping development cycles and open communication between PNNL and the manufacturer.

  1. A study of offshore benthic communities in natural areas and in areas affected by dredging and dredged material disposal

    E-Print Network [OSTI]

    Henry, Clyde Allan

    1976-01-01T23:59:59.000Z

    A STUDY QF OFFSHORE BENTHIC COMMUNITIES IN NATURAL AREAS AND IN AREAS AFFECTED BY DREDGING AND DREDGED MATERIAL DISPOSAL A Thesis by CLYDE ALLAN HENRY e Submitted to the Graduate College of Texas A&M University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE August 1976 Major Subject: Biology A STCDY OF 0-FSHOBE BENTHIC COMKTNITIES IN NATURAL AREAS AND IN AREAS AFFECTED BY DREDGING AND DREDCFD NATERIAL DISPOSAL A Thesis by CLYDE ALLAN HENRY Approved...

  2. 300 AREA URANIUM CONTAMINATION

    SciTech Connect (OSTI)

    BORGHESE JV

    2009-07-02T23:59:59.000Z

    {sm_bullet} Uranium fuel production {sm_bullet} Test reactor and separations experiments {sm_bullet} Animal and radiobiology experiments conducted at the. 331 Laboratory Complex {sm_bullet} .Deactivation, decontamination, decommissioning,. and demolition of 300 Area facilities

  3. Physics Thrust Areas

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeedingBiomassPPPOPetroleum ReservesThrust Areas Physics Thrust Areas

  4. 300 Area Disturbance Report

    SciTech Connect (OSTI)

    LL Hale; MK Wright; NA Cadoret

    1999-01-07T23:59:59.000Z

    The objective of this study was to define areas of previous disturbance in the 300 Area of the U.S. Department of Energy (DOE) Hanford Site to eliminate these areas from the cultural resource review process, reduce cultural resource monitoring costs, and allow cultural resource specialists to focus on areas where subsurface disturbance is minimal or nonexistent. Research into available sources suggests that impacts from excavations have been significant wherever the following construction activities have occurred: building basements and pits, waste ponds, burial grounds, trenches, installation of subsurface pipelines, power poles, water hydrants, and well construction. Beyond the areas just mentioned, substrates in the' 300 Area consist of a complex, multidimen- sional mosaic composed of undisturbed stratigraphy, backfill, and disturbed sediments; Four Geographic Information System (GIS) maps were created to display known areas of disturbance in the 300 Area. These maps contain information gleaned from a variety of sources, but the primary sources include the Hanford GIS database system, engineer drawings, and historic maps. In addition to these maps, several assumptions can be made about areas of disturbance in the 300 Area as a result of this study: o o Buried pipelines are not always located where they are mapped. As a result, cultural resource monitors or specialists should not depend on maps depicting subsurface pipelines for accurate locations of previous disturbance. Temporary roads built in the early 1940s were placed on layers of sand and gravel 8 to 12 in. thick. Given this information, it is likely that substrates beneath these early roads are only minimally disturbed. Building foundations ranged from concrete slabs no more than 6 to 8 in. thick to deeply excavated pits and basements. Buildings constructed with slab foundations are more numerous than may be expected, and minimally disturbed substrates may be expected in these locations. Historic black and white photographs provide a partial record of some excavations, including trenches, building basements, and material lay-down yards. Estimates of excavation depth and width can be made, but these estimates are not accurate enough to pinpoint the exact location where the disturbedhmdisturbed interface is located (e.g., camera angles were such that depths and/or widths of excavations could not be accurately determined or estimated). In spite of these limitations, these photographs provide essential information. Aerial and historic low-level photographs have captured what appears to be backfill throughout much of the eastern portion of the 300 Area-near the Columbia River shoreline. This layer of fill has likely afforded some protection for the natural landscape buried beneath the fill. This assumption fits nicely with the intermittent and inadvertent discoveries of hearths and stone tools documented through the years in this part of the 300 Area. Conversely, leveling of sand dunes appears to be substantial in the northwestern portion of the 300 Area during the early stages of development. o Project files and engineer drawings do not contain information on any impromptu but necessary adjustments made on the ground during project implementation-after the design phase. Further, many projects are planned and mapped but never implemented-this information is also not often placed in project files. Specific recommendations for a 300 Area cultural resource monitoring strategy are contained in the final section of this document. In general, it is recommended that monitoring continue for all projects located within 400 m of the Columbia River. The 400-m zone is culturally sensitive and likely retains some of the most intact buried substrates in the 300 Area.

  5. Mineral Requirements of Sheep.

    E-Print Network [OSTI]

    Fraps, G. S. (George Stronach)

    1918-01-01T23:59:59.000Z

    constituents in feed, residues, and excrements were estimated. In connection with other digestion experiments, estimates were made of certain ash constituents in feeds, excrements and urine. The results of this work throw light upon the mineral requirements...,11 grams phosphoric acid. The ratio of lime to phosphoric acid in tri- calcium phosphate is 1 :0.80. Table 7.-Average magnesia eaten and digested. BALANCE EXPEBIMENTS In twenty tests with ten rations, the urine was analyzed in addition to the feeds...

  6. LEGACY MANAGEMENT REQUIRES INFORMATION

    SciTech Connect (OSTI)

    CONNELL, C.W.; HILDEBRAND, R.D.

    2006-12-14T23:59:59.000Z

    ''Legacy Management Requires Information'' describes the goal(s) of the US Department of Energy's Office of Legacy Management (LM) relative to maintaining critical records and the way those goals are being addressed at Hanford. The paper discusses the current practices for document control, as well as the use of modern databases for both storing and accessing the data to support cleanup decisions. In addition to the information goals of LM, the Hanford Federal Facility Agreement and Consent Order, known as the ''Tri-Party Agreement'' (TPA) is one of the main drivers in documentation and data management. The TPA, which specifies discrete milestones for cleaning up the Hanford Site, is a legally binding agreement among the US Department of Energy (DOE), the Washington State Department of Ecology (Ecology), and the US Environmental Protection Agency (EPA). The TPA requires that DOE provide the lead regulatory agency with the results of analytical laboratory and non-laboratory tests/readings to help guide them in making decisions. The Agreement also calls for each signatory to preserve--for at least ten years after the Agreement has ended--all of the records in its or its contractors, possession related to sampling, analysis, investigations, and monitoring conducted. The tools used at Hanford to meet TPA requirements are also the tools that can satisfy the needs of LM.

  7. BER Science Network Requirements

    SciTech Connect (OSTI)

    Dart, Eli; Tierney, Brian

    2010-11-01T23:59:59.000Z

    The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the US Department of Energy Office of Science, the single largest supporter of basic research in the physical sciences in the United States. In support of the Office of Science programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 20 years. In April 2010 ESnet and the Office of Biological and Environmental Research, of the DOE Office of Science, organized a workshop to characterize the networking requirements of the science programs funded by BER. The requirements identified at the workshop are summarized and described in more detail in the case studies and the Findings section. A number of common themes emerged from the case studies and workshop discussions. One is that BER science, like many other disciplines, is becoming more and more distributed and collaborative in nature. Another common theme is that data set sizes are exploding. Climate Science in particular is on the verge of needing to manage exabytes of data, and Genomics is on the verge of a huge paradigm shift in the number of sites with sequencers and the amount of sequencer data being generated.

  8. A Requirements Specification Case Study with ProjectIT-Studio/Requirements

    E-Print Network [OSTI]

    da Silva, Alberto Rodrigues

    in the area of requirements engineering and model-driven development, which we have named Projec- tIT [1]. One specification. Our approach is based on a controlled natural language, seeking to achieve a higher level--Languages; D.2.2 [SOFTWARE ENGI- NEERING]: Design Tools and Techniques--Computer-aided software engineering

  9. Large Area Vacuum Deposited Coatings

    SciTech Connect (OSTI)

    Martin, Peter M.

    2003-04-30T23:59:59.000Z

    It's easy to make the myriad of types of large area and decorative coatings for granted. We probably don't even think about most of them; the low-e and heat mirror coatings on our windows and car windows, the mirrors in displays, antireflection coatings on windows and displays, protective coatings on aircraft windows, heater coatings on windshields and aircraft windows, solar reflectors, thin film solar cells, telescope mirrors, Hubble mirrors, transparent conductive coatings, and the list goes on. All these products require large deposition systems and chambers. Also, don't forget that large batches of small substrates or parts are coated in large chambers. In order to be cost effective hundreds of ophthalmic lenses, automobile reflectors, display screens, lamp reflectors, cell phone windows, laser reflectors, DWDM filters, are coated in batches.

  10. BES Science Network Requirements

    SciTech Connect (OSTI)

    Dart, Eli; Tierney, Brian; Dart, Eli; Biocca, A.; Carlson, R.; Chen, J.; Cotter, S.; Dattoria, V.; Davenport, J.; Gaenko, A.; Kent, P.; Lamm, M.; Miller, S.; Mundy, C.; Ndousse, T.; Pederson, M.; Perazzo, A.; Popescu, R.; Rouson, D.; Sekine, Y.; Sumpter, B.; Wang, C.-Z.; Whitelam, S.; Zurawski, J.

    2011-02-01T23:59:59.000Z

    The Energy Sciences Network (ESnet) is the primary provider of network connectivityfor the US Department of Energy Office of Science (SC), the single largest supporter of basic research in the physical sciences in the United States. In support of the Office ofScience programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 20 years.

  11. NERSC Requirements Workshop November

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Saleshttp://www.fnal.gov/directorate/nalcal/nalcal02_07_05_files/nalcal.gif Directorate - Events -ExascalemadeArchivalRequirements

  12. Requirements Review Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Scienceand Requirements Recently ApprovedReliability TechnologyRenewalReportReportsJ.TO9Complex

  13. Documentation Requirements for Sensory Impairments

    E-Print Network [OSTI]

    Documentation Requirements for Sensory Impairments Vision and Hearing Students, faculty, staff documentation requirements: 1. Requirements of the PRACTITIONER: A) Ophthalmologists and optometrists of interest. C) Documentation must be typed, dated and signed by the evaluator and submitted to ODR

  14. OLED area illumination source

    DOE Patents [OSTI]

    Foust, Donald Franklin (Scotia, NY); Duggal, Anil Raj (Niskayuna, NY); Shiang, Joseph John (Niskayuna, NY); Nealon, William Francis (Gloversville, NY); Bortscheller, Jacob Charles (Clifton Park, NY)

    2008-03-25T23:59:59.000Z

    The present invention relates to an area illumination light source comprising a plurality of individual OLED panels. The individual OLED panels are configured in a physically modular fashion. Each OLED panel comprising a plurality of OLED devices. Each OLED panel comprises a first electrode and a second electrode such that the power being supplied to each individual OLED panel may be varied independently. A power supply unit capable of delivering varying levels of voltage simultaneously to the first and second electrodes of each of the individual OLED panels is also provided. The area illumination light source also comprises a mount within which the OLED panels are arrayed.

  15. Inner Area Principles

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn Other News linkThermalInner Area Principles The Inner Area

  16. Plutonium focus area. Technology summary

    SciTech Connect (OSTI)

    NONE

    1997-09-01T23:59:59.000Z

    The Assistant Secretary for the Office of Environmental Management (EM) at the U.S. Department of Energy (DOE) chartered the Plutonium Focus Area (PFA) in October 1995. The PFA {open_quotes}...provides for peer and technical reviews of research and development in plutonium stabilization activities...{close_quotes} In addition, the PFA identifies and develops relevant research and technology. The purpose of this document is to focus attention on the requirements used to develop research and technology for stabilization, storage, and preparation for disposition of nuclear materials. The PFA Technology Summary presents the approach the PFA uses to identify, recommend, and review research. It lists research requirements, research being conducted, and gaps where research is needed. It also summarizes research performed by the PFA in the traditional research summary format. This document encourages researchers and commercial enterprises to do business with PFA by submitting research proposals or {open_quotes}white papers.{close_quotes} In addition, it suggests ways to increase the likelihood that PFA will recommend proposed research to the Nuclear Materials Stabilization Task Group (NMSTG) of DOE.

  17. ENVIRONMENTAL HEALTH SCIENCES Plan Requirements Campus: UMICH RG = Requirement Group

    E-Print Network [OSTI]

    Shyy, Wei

    ENVIRONMENTAL HEALTH SCIENCES Plan Requirements Campus: UMICH RG = Requirement Group Career: GPH RQ = Requirement Program: 01848 LN = Line Plan: 3200MPH RG 5298 ENVIRONMENTAL HEALTH SCIENCES REQUIREMENTS, 643, 653, 675, 677 or 695 LN 0030 - Environmental Health Sciences: EHS 501, 506, 507 or 508 LN 0040

  18. PROTECTED AREAS AMENDMENTS AND.

    E-Print Network [OSTI]

    as critical fish and wildlife habitat. The "protected areas" amendment is a major step in the Council's efforts to rebuild fish and wildlife populations that have been damaged by hydroelectric development. Low also imposed significant costs. The Northwest's fish and wildlife have suffered extensive losses

  19. MSL ENTERANCE REFERENCE AREA

    E-Print Network [OSTI]

    Aalberts, Daniel P.

    MSL ENTERANCE LOBBY ELEV STAIRS SSL-019 REFERENCE AREA SSL-021 GROUP STUDY SSL-018 STUDY ROOM SSL-029 SSL-020 COPY ROOM SSL-022 GROUP STUDY SSL-026 STACKS SSL-023 GROUP STUDY SSL-024 GROUP STUDY SSL TBL-014 TBL-014A STAIRS SSL-007 GIS/ WORKROOM SSL-011 SSL-008 SSL-009 SSL-010 SSL-014 SSL-017 STAIRS

  20. Subsurface contaminants focus area

    SciTech Connect (OSTI)

    NONE

    1996-08-01T23:59:59.000Z

    The US Department of Enregy (DOE) Subsurface Contaminants Focus Area is developing technologies to address environmental problems associated with hazardous and radioactive contaminants in soil and groundwater that exist throughout the DOE complex, including radionuclides, heavy metals; and dense non-aqueous phase liquids (DNAPLs). More than 5,700 known DOE groundwater plumes have contaminated over 600 billion gallons of water and 200 million cubic meters of soil. Migration of these plumes threatens local and regional water sources, and in some cases has already adversely impacted off-site rsources. In addition, the Subsurface Contaminants Focus Area is responsible for supplying technologies for the remediation of numerous landfills at DOE facilities. These landfills are estimated to contain over 3 million cubic meters of radioactive and hazardous buried Technology developed within this specialty area will provide efective methods to contain contaminant plumes and new or alternative technologies for development of in situ technologies to minimize waste disposal costs and potential worker exposure by treating plumes in place. While addressing contaminant plumes emanating from DOE landfills, the Subsurface Contaminants Focus Area is also working to develop new or alternative technologies for the in situ stabilization, and nonintrusive characterization of these disposal sites.

  1. Plutonium focus area

    SciTech Connect (OSTI)

    NONE

    1996-08-01T23:59:59.000Z

    To ensure research and development programs focus on the most pressing environmental restoration and waste management problems at the U.S. Department of Energy (DOE), the Assistant Secretary for the Office of Environmental Management (EM) established a working group in August 1993 to implement a new approach to research and technology development. As part of this new approach, EM developed a management structure and principles that led to the creation of specific Focus Areas. These organizations were designed to focus the scientific and technical talent throughout DOE and the national scientific community on the major environmental restoration and waste management problems facing DOE. The Focus Area approach provides the framework for intersite cooperation and leveraging of resources on common problems. After the original establishment of five major Focus Areas within the Office of Technology Development (EM-50, now called the Office of Science and Technology), the Nuclear Materials Stabilization Task Group (EM-66) followed the structure already in place in EM-50 and chartered the Plutonium Focus Area (PFA). The following information outlines the scope and mission of the EM, EM-60, and EM-66 organizations as related to the PFA organizational structure.

  2. DOE Designates Southwest Area and Mid-Atlantic Area National...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Interest Electric Transmission Corridors DOE Designates Southwest Area and Mid-Atlantic Area National Interest Electric Transmission Corridors October 2, 2007 - 11:12am Addthis...

  3. ENGINEERING PHYSICS BSE Plan Requirements

    E-Print Network [OSTI]

    Shyy, Wei

    ENGINEERING PHYSICS BSE Plan Requirements 1 Campus: UMICH RG = Requirement Group Career: UENG RQ = Requirement Program: LN = Line Plan: 2990BSE RG 6394 ENGINEERING PHYSICS MAJOR REQUIREMENTS Effective FA12/1910 (09/04/2012) RQ 4925 Physics Technical Subjects (C or higher) Effective FA12/1910 (09/04/2012) LN 0010

  4. Probabilistic Damage Detection Based on Large Area Electronics Sensing Sheets

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Probabilistic Damage Detection Based on Large Area Electronics Sensing Sheets Yao Yao and Branko-stage damage detection and characterization requires continuous sensing over large areas of structure are not sensitive to damage. In this research, a probabilistic approach based on Monte Carlo (MC) simulations

  5. Areas Participating in the Reformulated Gasoline Program (Released in the STEO June 1999)

    Reports and Publications (EIA)

    1999-01-01T23:59:59.000Z

    Section 107(d) of the Clean Air Act, as amended in 1990 (the Act), required states to identify all areas that do not meet the national ambient air quality standards (NAAQS) for ozone, and directed the Environmental Protection Agency (EPA) to designate these areas as ozone nonattainment areas. Section 181 of the Act required EPA to classify each area as a marginal, moderate, serious, severe or extreme ozone nonattainment area. EPA classified all areas that were designated as in nonattainment for ozone at the time of the enactment of the 1990 Amendments, except for certain "nonclassifiable" areas (56 FR 56694, November 6, 1991).

  6. Mixed waste characterization, treatment & disposal focus area

    SciTech Connect (OSTI)

    NONE

    1996-08-01T23:59:59.000Z

    The mission of the Mixed Waste Characterization, Treatment, and Disposal Focus Area (referred to as the Mixed Waste Focus Area or MWFA) is to provide treatment systems capable of treating DOE`s mixed waste in partnership with users, and with continual participation of stakeholders, tribal governments, and regulators. The MWFA deals with the problem of eliminating mixed waste from current and future storage in the DOE complex. Mixed waste is waste that contains both hazardous chemical components, subject to the requirements of the Resource Conservation and Recovery Act (RCRA), and radioactive components, subject to the requirements of the Atomic Energy Act. The radioactive components include transuranic (TRU) and low-level waste (LLW). TRU waste primarily comes from the reprocessing of spent fuel and the use of plutonium in the fabrication of nuclear weapons. LLW includes radioactive waste other than uranium mill tailings, TRU, and high-level waste, including spent fuel.

  7. Vital area determination techniques at nuclear power plants

    SciTech Connect (OSTI)

    Pan, P.Y.

    1987-07-01T23:59:59.000Z

    This paper describes the vital area determination programs being conducted at the Los Alamos National Laboratory to support the Nuclear Regulatory Commission (NRC) in evaluating nuclear power plant licensees' compliance with safeguards/security requirements. These projects, the Vital Area Analysis (VAA) Program and the Vital Equipment Determination Techniques Research Study (VEDTRS), are designed to identify a plant's vital areas and to develop protection strategies against adversary threats in nuclear power plants.

  8. Technical Basis Document for PFP Area Monitoring Dosimetry Program

    SciTech Connect (OSTI)

    COOPER, J.R.

    2000-04-17T23:59:59.000Z

    This document describes the phantom dosimetry used for the PFP Area Monitoring program and establishes the basis for the Plutonium Finishing Plant's (PFP) area monitoring dosimetry program in accordance with the following requirements: Title 10, Code of Federal Regulations (CFR), part 835, ''Occupational Radiation Protection'' Part 835.403; Hanford Site Radiological Control Manual (HSRCM-1), Part 514; HNF-PRO-382, Area Dosimetry Program; and PNL-MA-842, Hanford External Dosimetry Technical Basis Manual.

  9. Scientific and Natural Areas (Minnesota)

    Broader source: Energy.gov [DOE]

    Certain scientific and natural areas are established throughout the state for the purpose of preservation and protection. Construction and new development is prohibited in these areas.

  10. Functional Area Criteria & Review Approach Documents

    Broader source: Energy.gov [DOE]

    CRADS provided on this page are provided as examples of functional area Objectives and Criteria used to evaluate how requirements are meet. They are only examples and should not be utilized as is. In accordance with DOE Standard 3006-2010, CRADs should be developed by team members to reflect the specifics of the proposed review (i.e., breadth and depth) as defined in the approved Plan of Action.

  11. Preliminary investigation Area 12 fleet operations steam cleaning discharge area Nevada Test Site

    SciTech Connect (OSTI)

    NONE

    1996-07-01T23:59:59.000Z

    This report documents the characterization activities and findings of a former steam cleaning discharge area at the Nevada Test Site. The former steam cleaning site is located in Area 12 east of Fleet Operations Building 12-16. The characterization project was completed as a required condition of the ``Temporary Water Pollution Control Permit for the Discharge From Fleet Operations Steam Cleaning Facility`` issued by the Nevada Division of Environmental Protection. The project objective was to collect shallow soil samples in eight locations in the former surface discharge area. Based upon field observations, twelve locations were sampled on September 6, 1995 to better define the area of potential impact. Samples were collected from the surface to a depth of approximately 0.3 meters (one foot) below land surface. Discoloration of the surface soil was observed in the area of the discharge pipe and in localized areas in the natural drainage channel. The discoloration appeared to be consistent with the topographically low areas of the site. Hydrocarbon odors were noted in the areas of discoloration only. Samples collected were analyzed for bulk asbestos, Toxicity Characteristic Leaching Procedure (TCLP) metals, total petroleum hydrocarbons (TPHs), volatile organic compounds (VOCs), semi-volatile organic compounds (Semi-VOCs), and gamma scan.

  12. Application of Reinforcement Learning to Requirements Engineering: Requirements Tracing

    E-Print Network [OSTI]

    Hayes, Jane E.

    of the Software Development Life Cycle (SDLC) can be appreciated by the customers who request and expect delivery the phases of the SDLC, a number of steps can be taken. Requirements tracing ensures that requirements

  13. Large area bulk superconductors

    DOE Patents [OSTI]

    Miller, Dean J. (Darien, IL); Field, Michael B. (Jersey City, NJ)

    2002-01-01T23:59:59.000Z

    A bulk superconductor having a thickness of not less than about 100 microns is carried by a polycrystalline textured substrate having misorientation angles at the surface thereof not greater than about 15.degree.; the bulk superconductor may have a thickness of not less than about 100 microns and a surface area of not less than about 50 cm.sup.2. The textured substrate may have a thickness not less than about 10 microns and misorientation angles at the surface thereof not greater than about 15.degree.. Also disclosed is a process of manufacturing the bulk superconductor and the polycrystalline biaxially textured substrate material.

  14. Strategic Focus Areas

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol HomeFacebookScholarshipSpiralingSecurity217,354Strategic Focus Areas Lockheed

  15. Webinar: Hydrogen Storage Materials Requirements

    Broader source: Energy.gov [DOE]

    Video recording and text version of the webinar titled, Hydrogen Storage Materials Requirements, originally presented on June 25, 2013.

  16. T-1 Training Area

    SciTech Connect (OSTI)

    None

    2014-11-07T23:59:59.000Z

    Another valuable homeland security asset at the NNSS is the T-1 training area, which covers more than 10 acres and includes more than 20 separate training venues. Local, County, and State first responders who train here encounter a variety of realistic disaster scenarios. A crashed 737 airliner lying in pieces across the desert, a helicopter and other small aircraft, trucks, buses, and derailed train cars are all part of the mock incident scene. After formal classroom education, first responders are trained to take immediate decisive action to prevent or mitigate the use of radiological or nuclear devices by terrorists. The Counterterrorism Operations Support Center for Radiological Nuclear Training conducts the courses and exercises providing first responders from across the nation with the tools they need to protect their communities. All of these elements provide a training experience that cannot be duplicated anywhere else in the country.

  17. T-1 Training Area

    ScienceCinema (OSTI)

    None

    2015-01-09T23:59:59.000Z

    Another valuable homeland security asset at the NNSS is the T-1 training area, which covers more than 10 acres and includes more than 20 separate training venues. Local, County, and State first responders who train here encounter a variety of realistic disaster scenarios. A crashed 737 airliner lying in pieces across the desert, a helicopter and other small aircraft, trucks, buses, and derailed train cars are all part of the mock incident scene. After formal classroom education, first responders are trained to take immediate decisive action to prevent or mitigate the use of radiological or nuclear devices by terrorists. The Counterterrorism Operations Support Center for Radiological Nuclear Training conducts the courses and exercises providing first responders from across the nation with the tools they need to protect their communities. All of these elements provide a training experience that cannot be duplicated anywhere else in the country.

  18. Functional Area Assessments Project Charter Workstream Name Functional Area Assessments

    E-Print Network [OSTI]

    Sheridan, Jennifer

    with Huron on detailed project plan. Subject Experts Subject Expert Role Functional leadership Administrative1 of 2 Functional Area Assessments ­ Project Charter Workstream Name Functional Area Assessments - Internal Budgeting - Human Resources These diagnostics will be performed using interviews, surveys, data

  19. Methodology for Defining Gap Areas between Course-over-ground Locations

    SciTech Connect (OSTI)

    Wilson, John E.

    2013-09-30T23:59:59.000Z

    Finding all areas that lie outside some distance d from a polyline is a problem with many potential applications. This application of the Visual Sample Plan (VSP) software required finding all areas that were more than distance d from a set of existing paths (roads and trails) represented by polylines. An outer container polygon (known in VSP as a “sample area”) defines the extents of the area of interest. The term “gap area” was adopted for this project, but another useful term might be “negative coverage area.” The project required a polygon solution rather than a raster solution. The search for a general solution provided no results, so this methodology was developed

  20. Software Quality Assurance Subcommittee : Guidelines for Requirements...

    Broader source: Energy.gov (indexed) [DOE]

    Software Quality Assurance Subcommittee : Guidelines for Requirements Management Software Quality Assurance Subcommittee : Guidelines for Requirements Management Requirements...

  1. Molten Salt Fuel Cycle Requirements for ADTT Applications

    SciTech Connect (OSTI)

    Del Cul, G.D.; Toth, L.M.; Williams, D.F.

    1999-06-07T23:59:59.000Z

    The operation of an ADT system with the associated nuclear reactions has a profound effect upon the chemistry of the fuel - especially with regards to container compatibility and the chemical separations that may be required. The container can be protected by maintaining the redox chemistry within a relatively narrow, non-corrosive window. Neutron economy as well as other factors require a sophisticated regime of fission product separations. Neither of these control requirements has been demonstrated on the scale or degree of sophistication necessary to support an ADT device. We review the present situation with respect to fluoride salts, and focus on the critical issues in these areas which must be addressed. One requirement for advancement in this area - a supply of suitable materials - will soon be fulfilled by the remediation of ORNL?s Molten Salt Reactor Experiment, and the removal of a total of 11,000 kg of enriched (Li-7 > 99.9%) coolant, flush, and fuel salts.

  2. Surface Water Management Areas (Virginia)

    Broader source: Energy.gov [DOE]

    This legislation establishes surface water management areas, geographically defined surface water areas in which the State Water Control Board has deemed the levels or supply of surface water to be...

  3. Boundary Waters Canoe Area (Minnesota)

    Broader source: Energy.gov [DOE]

    The Boundary Waters Canoe Area occupies a large section of northern Minnesota, and is preserved as a primitive wilderness area. Construction and new development is prohibited. A map of the...

  4. Managing System of Systems Requirements with a Requirements Screening Group

    SciTech Connect (OSTI)

    Ronald R. Barden

    2012-07-01T23:59:59.000Z

    Figuring out an effective and efficient way to manage not only your Requirement’s Baseline, but also the development of all your individual requirements during a Program’s/Project’s Conceptual and Development Life Cycle Stages can be both daunting and difficult. This is especially so when you are dealing with a complex and large System of Systems (SoS) Program with potentially thousands and thousands of Top Level Requirements as well as an equal number of lower level System, Subsystem and Configuration Item requirements that need to be managed. This task is made even more overwhelming when you have to add in integration with multiple requirements’ development teams (e.g., Integrated Product Development Teams (IPTs)) and/or numerous System/Subsystem Design Teams. One solution for tackling this difficult activity on a recent large System of Systems Program was to develop and make use of a Requirements Screening Group (RSG). This group is essentially a Team made up of co-chairs from the various Stakeholders with an interest in the Program of record that are enabled and accountable for Requirements Development on the Program/Project. The RSG co-chairs, often with the help of individual support team, work together as a Program Board to monitor, make decisions on, and provide guidance on all Requirements Development activities during the Conceptual and Development Life Cycle Stages of a Program/Project. In addition, the RSG can establish and maintain the Requirements Baseline, monitor and enforce requirements traceability across the entire Program, and work with other elements of the Program/Project to ensure integration and coordination.

  5. Communication in Home Area Networks

    E-Print Network [OSTI]

    Wang, Yubo

    2012-01-01T23:59:59.000Z

    used in area like smart buildings, street light controls andbuilding. This section focuses on HAN design to address two smart

  6. Mock Nuclear Processing Facility-Safeguards Training Requirements

    SciTech Connect (OSTI)

    Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Hasty, Tim [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Johns, Rissell [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Baum, Gregory [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-08-31T23:59:59.000Z

    This document outlines specific training requirements in the topical areas of Material Control and Accounting (MC&A) and Physical Protection(PP) which are to be used as technical input for designing a mock Integrated Security Facility (ISF) at Sandia National Laboratories (SNL). The overall project objective for these requirements is to enhance the ability to deliver training on Material Protection Control and Accounting (MC&A) concepts regarding hazardous material such as irradiated materials with respect to bulk processing facilities.

  7. Vamp{trademark} coverage area for personnel protection

    SciTech Connect (OSTI)

    Roach, C.A.; Cantrell, J.R.

    1995-01-03T23:59:59.000Z

    The VAMP{trademark} Area Radiation Monitors, in addition to functioning as radiation monitors for process upsets, as required by the OSR, provide monitoring in order to detect and alarm increasing radiation for the purpose of controlling exposure of personnel to radiation. Operational Safety Requirements (DPW-86-103) requires that area radiation monitors be provided in the vicinity of all waste tanks to ensure safe operation. The current location of area radiation monitors provide the coverage required by the OSR criteria and, with few exceptions, these monitors also provide the necessary coverage for personnel protection. The exceptions to the coverage for personnel protection are listed along with the proposed action to bring the facility into compliance with the DOE Radiological Manual. The exceptions are based upon the assumptions, which HLWE believes are conservative, used to develop the coverage maps generated by Health Physics Technology (HPT). No change to the 9B5 Manual reporting criteria relating to area radiation monitors is required. No change to transfer procedures to provide additional VAMP coverage for personnel protection is required for a source term greater than assumed in this report. It is expected that this Technical Report will provide the basis for future assessment when changes to the facility are initiated.

  8. Fusion Energy Sciences Network Requirements

    E-Print Network [OSTI]

    Dart, Eli

    2014-01-01T23:59:59.000Z

    Division, and the Office of Fusion Energy Sciences. This isFusion Energy Sciences NetworkRequirements Office of Fusion Energy Sciences Energy

  9. Map of Erosion Risk (C2)3 Vegetation Indices and Map of Minimum Forested Area4 5&

    E-Print Network [OSTI]

    are required forest areas for Vietnam Erosion Risk Map Cover types C1 Natural Forests >1.7 Plantation forest.2 (ESRI, 2008), to generate a map of required protective forest area for Vietnam. (3) (4) (5Results Map of Erosion Risk (C2)3 Vegetation Indices and Map of Minimum Forested Area4 5& · Map

  10. Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Technical s o Freiberge s 3 % A PB 2 7 7 2 x>16Forms of1, 2

  11. Thesis and Dissertation Required Elements

    E-Print Network [OSTI]

    Texas at Arlington, University of

    /dissertation documents have a uniform appearance and are suitable for archiving. The requirements follow the guidelines to the following guidelines are acceptable. · All margins must be at least 1.25" and may not be more than 1/dissertation should be double-spaced. #12;Thesis and Dissertation Required Elements 2012 version Paragraph Indentation

  12. Calibration Requirements and Procedures for

    E-Print Network [OSTI]

    Tuceryan, Mihran

    Calibration Requirements and Procedures for Augmented Reality Mihran Tuceryan Douglas S. Greer Ross Graphics, Sept 1995) Calibration Requirements and Procedures for Augmented Reality Mihran Tuceryan Douglas of calibration procedures are necessary so that the location and parameters of each of the system components

  13. MINIMUM SECURITY REQUIREMENTS FOR FEDERAL

    E-Print Network [OSTI]

    March 2006 MINIMUM SECURITY REQUIREMENTS FOR FEDERAL INFORMATION AND INFORMATION SYSTEMS: FEDERAL INFORMATION PROCESSING STANDARD (FIPS) 200 APPROVED BY THE SECRETARY OF COMMERCE MINIMUM SECURITY REQUIREMENTS BY THE SECRETARY OF COMMERCE Shirley Radack, EditorShirley Radack, Editor Computer Security Division

  14. Humidity requirements in WSCF Laboratories

    SciTech Connect (OSTI)

    Evans, R.A.

    1994-10-01T23:59:59.000Z

    The purpose of this paper is to develop and document a position on Relative Humidity (RH) requirements in the WSCF Laboratories. A current survey of equipment vendors for Organic, Inorganic and Radiochemical laboratories indicate that 25% - 80% relative humidity may meet the environmental requirements for safe operation and protection of all the laboratory equipment.

  15. DOE Designates Southwest Area and Mid-Atlantic Area National...

    Energy Savers [EERE]

    twelve years. The Mid-Atlantic Area National Corridor includes certain counties in Ohio, West Virginia, Pennsylvania, New York, Maryland, Virginia, and all of New Jersey,...

  16. area spoil area: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    populations. It is part of a network of AHEC organiza- tions Collins, Gary S. 25 tight environment high radiation area Physics Websites Summary: , no active electronics ...

  17. 3. MATERIAL CERTIFICATIONS REQUIRED. 100% DYE PENETRANT INSPECTION REQUIRED.

    E-Print Network [OSTI]

    McDonald, Kirk

    WELDS SHOULD BE MINIMIZED. NO CODE STAMP REQUIRED. IN ACCORDANCE WITH ASME SECTION IX. 1. WELDING and applicable 1. ALL DIMENSIONS ARE IN INCHES 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M 3. MACHINED

  18. Improved load models for multi-area reliability calculations

    E-Print Network [OSTI]

    Pathak, Sanjesh

    1992-01-01T23:59:59.000Z

    IMPROVED LOAD MODELS FOR MULTI-AREA RELIABILITY CALCULATIONS A Thesis by SANJESH PATHAK Submitted to the Office of Graduate Studies of Texas ARM University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE May... 1992 Major Subject: Electrical Engineering IMPROVED LOAD MODELS FOR MULTI-AREA RELIABILITY CALCULATIONS A Thesis by SAN JESH PATHAK Approved as to style and content by: Chanan Singh (Chair of Committee) Prasad Enjeti (Member) Ces . Mal, e...

  19. Structural geology of the Henneberry Ridge area, Beaverhead County, Montana

    E-Print Network [OSTI]

    Coryell, Jeffrey John

    1983-01-01T23:59:59.000Z

    ) and Weed (1900), helped define the Paleozoic stratigraphy of the Montana-Wyoming area as well as establish tenative type sections, some of which are still in use today. The search for economic deposits of minerals and oil shales provided the impetus...STRUCTURAL GEOLOGY OF THE HENNEBERRY RIDGE AREA, BEAVERHEAD COUNTY, MONTANA A Thesis by JEFFREY JOHN CORYELL Submitted to the Graduate College of Texas ARM University in partial fulfillment of the requirements for the degree of MASTER...

  20. Logit Models for Estimating Urban Area Through Travel

    E-Print Network [OSTI]

    Talbot, Eric

    2011-10-21T23:59:59.000Z

    LOGIT MODELS FOR ESTIMATING URBAN AREA THROUGH TRAVEL A Thesis by ERIC TALBOT Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree... of MASTER OF SCIENCE August 2010 Major Subject: Civil Engineering LOGIT MODELS FOR ESTIMATING URBAN AREA THROUGH TRAVEL A Thesis by ERIC TALBOT Submitted to the Office of Graduate Studies of Texas A...

  1. STEEL PLATE SHEAR WALL BUILDINGS: DESIGN REQUIREMENTS AND RESEARCH

    E-Print Network [OSTI]

    Bruneau, Michel

    , University at Buffalo, Buffalo, NY 14260. #12;plate shear wall design and use of light-gage cold form platesSTEEL PLATE SHEAR WALL BUILDINGS: DESIGN REQUIREMENTS AND RESEARCH Michel Bruneau, P.E. 1 Dr areas. This paper provides an overview of the current state-of-the-art in steel plate shear wall design

  2. OKLAHOMA DEPARTMENT OF TRANSPORTATION PAVEMENT AND BRIDGE DECK SMOOTHNESS REQUIREMENTS

    E-Print Network [OSTI]

    OKLAHOMA DEPARTMENT OF TRANSPORTATION SUMMARY OF PAVEMENT AND BRIDGE DECK SMOOTHNESS REQUIREMENTS), HMA (hot mix asphalt), PCCP (P.C. concrete pavement) and Bridge Decks. Areas where 1/8 to 1/2 inch per written specifically for Pavement Smoothness which is summarized below and is also attached for your

  3. NATIONAL DATA BUOY CAPABILITIES AND REQUIREMENTS 8.1. General.

    E-Print Network [OSTI]

    CHAPTER 8 NATIONAL DATA BUOY CAPABILITIES AND REQUIREMENTS 8.1. General. 8.1.1. Automated Reporting Stations. The National Data Buoy Center (NDBC) maintains automated reporting stations in the coastal and deep ocean areas of the Gulf of Mexico, the Atlantic and Pacific Oceans, and in the Great Lakes

  4. Harrisburg Area Community College Portland State University Updated 8/29/2014

    E-Print Network [OSTI]

    Latiolais, M. Paul

    Harrisburg Area Community College Portland State University Updated 8/29/2014 Transfer Worksheet College-level transferable academic courses taken at Harrisburg Area Community College (HACC;Harrisburg Area Community College Portland State University Updated 8/29/2014 2. DEGREE REQUIREMENTS

  5. Communication in Home Area Networks

    E-Print Network [OSTI]

    Wang, Yubo

    2012-01-01T23:59:59.000Z

    and implementation of smart home energy management systemsStandard Technologies for Smart Home Area Networks EnablingInteroperability framework for smart home systems”, Consumer

  6. Meeting Federal Energy Security Requirements

    Broader source: Energy.gov [DOE]

    Presentation—given at at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meeting—discusses the opportunity to increase the scope of federal-utility partnerships for meeting energy security requirements.

  7. Fusion technology status and requirements

    SciTech Connect (OSTI)

    Thomassen, K.I.

    1982-01-26T23:59:59.000Z

    This paper summarizes the status of fusion technology and discusses the requirements to be met in order to build a demonstration fusion plant. Strategies and programmatic considerations in pursuing engineering feasibility are also outlined.

  8. POSTGRADUATE PROGRAMMES Procedures and Requirements

    E-Print Network [OSTI]

    Jagannatham, Aditya K.

    Engineering, Materials Science, Mechanical Engineering, Nuclear Engineering and Technology and Photonics Statistics), Mechanical Engineering, Nuclear Engineering and Technology, Photonics Science and Engineering(1) POSTGRADUATE PROGRAMMES Procedures and Requirements INDIAN INSTITUTE OF TECHNOLOGY KANPUR

  9. HTS wire requirements for SMES

    SciTech Connect (OSTI)

    Schoenung, S.; Schafer, W.J.

    1994-07-29T23:59:59.000Z

    This presentation/paper gives an overview of the Sandia National Lab`s sponsorship of W.J. Schafer Associates, Inc. to examine the following topics: the refrigeration savings possible by using high temperature superconductors (HTS) in Superconducting Magnetic Energy Storage (SMES), the impact of duty cycle on refrigeration requirements, and outline the required HTS wire performance. Included are specifications for SMES applications, advantages, cost components, assumed conductor performance parameters, and the effects of duty cycle and conductor twist pitch.

  10. Requirements for GNEP Transmutation Fuels

    SciTech Connect (OSTI)

    D. C. Crawford; M. K. Meyer; S. L. Hayes

    2007-03-01T23:59:59.000Z

    The purpose of this document is to provide a baseline set of requirements to guide fuel fabrication development and irradiation testing performed as part of the AFCRD Transmutation Fuel Development Program. This document can be considered a supplement to the GNEP TRU Fuel Development and Qualification Plan, and will be revised as necessary to maintain a documented set of fuel testing objectives and requirements consistent with programmatic decisions and advances in technical knowledge.

  11. Facility Effluent Monitoring Plan determinations for the 600 Area facilities

    SciTech Connect (OSTI)

    Nickels, J.M.

    1991-08-01T23:59:59.000Z

    This document determines the need for Facility Effluent Monitoring Plans for Westinghouse Hanford Company's 600 Area facilities on the Hanford Site. The Facility Effluent Monitoring Plan determinations were prepared in accordance with A Guide For Preparing Hanford Site Facility Effluent Monitoring Plans (WHC 1991). Five major Westinghouse Hanford Company facilities in the 600 Area were evaluated: the Purge Water Storage Facility, 212-N, -P, and -R Facilities, the 616 Facility, and the 213-J K Storage Vaults. Of the five major facilities evaluated in the 600 Area, none will require preparation of a Facility Effluent Monitoring Plan.

  12. Future missions require improving LANSCE capabilities to support five principal research areas.

    E-Print Network [OSTI]

    at the Materials Test Station. Science Critical to DOE and NNSA Missions for Over 35 Years #12;Hydrodynamics in weapons performance. We provide the NNSA the most efficient, cost-effective, and timely capabilities for defense and civilian science. The scope of work will bring the LINAC up to NNSA-mission performance

  13. H.B. 492 Areas of Required Instruction & the NEFE High School Financial Planning Program

    E-Print Network [OSTI]

    . starting a small business X Unit Seven: Doing What Matters Most 5. being a prudent investor in the stock. SECTION 3. This Act takes effect September 1, 2005

  14. Energy requirements for rural development

    SciTech Connect (OSTI)

    Jones, D.W.

    1988-06-01T23:59:59.000Z

    This study on the role of energy in the development of rural areas was originally conducted in the spring and summer of 1985. It was intended to serve as a background paper for the preparation of a program plan for the Office of Energy of the United States Agency for International Development. As such it begins with a brief overview of how rural development fits into national development, then offers a comprehensive framework for thinking about rural development in particular and the energy implications of the various components of rural development. Agriculture naturally comes to mind when rural areas are mentioned, but industry is an important component of rural activity as well. Consequently, both agricultural and nonagricultural energy use is discussed. Modernization of rural areas will change household, as well as production, energy use. However, household energy use is a veritable subject in its own right, with a large literature. Consequently, that topic is discussed in less detail than the production energy topics.

  15. Hydrogen Storage Materials Requirements (Text Version) | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Requirements (Text Version) Hydrogen Storage Materials Requirements (Text Version) Below is the text version of the webinar titled "Hydrogen Storage Materials Requirements,"...

  16. Tech Area II: A history

    SciTech Connect (OSTI)

    Ullrich, R. [Ktech Corp., Albuquerque, NM (United States)] [Ktech Corp., Albuquerque, NM (United States)

    1998-07-01T23:59:59.000Z

    This report documents the history of the major buildings in Sandia National Laboratories` Technical Area II. It was prepared in support of the Department of Energy`s compliance with Section 106 of the National Historic Preservation Act. Technical Area II was designed and constructed in 1948 specifically for the final assembly of the non-nuclear components of nuclear weapons, and was the primary site conducting such assembly until 1952. Both the architecture and location of the oldest buildings in the area reflect their original purpose. Assembly activities continued in Area II from 1952 to 1957, but the major responsibility for this work shifted to other sites in the Atomic Energy Commission`s integrated contractor complex. Gradually, additional buildings were constructed and the original buildings were modified. After 1960, the Area`s primary purpose was the research and testing of high-explosive components for nuclear weapons. In 1994, Sandia constructed new facilities for work on high-explosive components outside of the original Area II diamond-shaped parcel. Most of the buildings in the area are vacant and Sandia has no plans to use them. They are proposed for decontamination and demolition as funding becomes available.

  17. Coastal Area Management Program (Alabama)

    Broader source: Energy.gov [DOE]

    This program regulates coastal activities, permits required, discharges to coastal waters and siting, construction and operation of energy facilities. ADEM's Coastal Program rules include the...

  18. Renewable Energy Requirements for Future Building Codes: Options for Compliance

    SciTech Connect (OSTI)

    Dillon, Heather E.; Antonopoulos, Chrissi A.; Solana, Amy E.; Russo, Bryan J.

    2011-09-30T23:59:59.000Z

    As the model energy codes are improved to reach efficiency levels 50 percent greater than current codes, use of on-site renewable energy generation is likely to become a code requirement. This requirement will be needed because traditional mechanisms for code improvement, including envelope, mechanical and lighting, have been pressed to the end of reasonable limits. Research has been conducted to determine the mechanism for implementing this requirement (Kaufman 2011). Kaufmann et al. determined that the most appropriate way to structure an on-site renewable requirement for commercial buildings is to define the requirement in terms of an installed power density per unit of roof area. This provides a mechanism that is suitable for the installation of photovoltaic (PV) systems on future buildings to offset electricity and reduce the total building energy load. Kaufmann et al. suggested that an appropriate maximum for the requirement in the commercial sector would be 4 W/ft{sup 2} of roof area or 0.5 W/ft{sup 2} of conditioned floor area. As with all code requirements, there must be an alternative compliance path for buildings that may not reasonably meet the renewables requirement. This might include conditions like shading (which makes rooftop PV arrays less effective), unusual architecture, undesirable roof pitch, unsuitable building orientation, or other issues. In the short term, alternative compliance paths including high performance mechanical equipment, dramatic envelope changes, or controls changes may be feasible. These options may be less expensive than many renewable systems, which will require careful balance of energy measures when setting the code requirement levels. As the stringency of the code continues to increase however, efficiency trade-offs will be maximized, requiring alternative compliance options to be focused solely on renewable electricity trade-offs or equivalent programs. One alternate compliance path includes purchase of Renewable Energy Credits (RECs). Each REC represents a specified amount of renewable electricity production and provides an offset of environmental externalities associated with non-renewable electricity production. The purpose of this paper is to explore the possible issues with RECs and comparable alternative compliance options. Existing codes have been examined to determine energy equivalence between the energy generation requirement and the RECs alternative over the life of the building. The price equivalence of the requirement and the alternative are determined to consider the economic drivers for a market decision. This research includes case studies that review how the few existing codes have incorporated RECs and some of the issues inherent with REC markets. Section 1 of the report reviews compliance options including RECs, green energy purchase programs, shared solar agreements and leases, and other options. Section 2 provides detailed case studies on codes that include RECs and community based alternative compliance methods. The methods the existing code requirements structure alternative compliance options like RECs are the focus of the case studies. Section 3 explores the possible structure of the renewable energy generation requirement in the context of energy and price equivalence. The price of RECs have shown high variation by market and over time which makes it critical to for code language to be updated frequently for a renewable energy generation requirement or the requirement will not remain price-equivalent over time. Section 4 of the report provides a maximum case estimate for impact to the PV market and the REC market based on the Kaufmann et al. proposed requirement levels. If all new buildings in the commercial sector complied with the requirement to install rooftop PV arrays, nearly 4,700 MW of solar would be installed in 2012, a major increase from EIA estimates of 640 MW of solar generation capacity installed in 2009. The residential sector could contribute roughly an additional 2,300 MW based on the same code requirement levels of 4 W/ft{sup 2} of r

  19. SRP engineering and design history, Vol III, 200 F and H Areas

    SciTech Connect (OSTI)

    Banick, C.J.

    2000-04-17T23:59:59.000Z

    This volume combines the record of events relating to the development of design for both the 200-F and H Areas. Chronologically, the definition of plant facilities was first established for the 200-F Area. The second area, 200-H, was projected initially to be a supplementary plutonium separations facility. This history explains the differences in character and capacity of the manufacturing facilities in both areas as production requirements and experience with separations processes advanced.

  20. 100 Area soil washing treatability test plan

    SciTech Connect (OSTI)

    Not Available

    1993-03-01T23:59:59.000Z

    This test plan describes specifications, responsibilities, and general methodology for conducting a soil washing treatability study as applied to source unit contamination in the 100 Area. The objective ofthis treatability study is to evaluate the use of physical separation systems and chemical extraction methods as a means of separating chemically and radioactively contaminated soil fractions from uncontaminated soil fractions. The purpose of separating these fractions is to minimize the volume of soil requiring permanent disposal. It is anticipated that this treatability study will be performed in two phases of testing, a remedy screening phase and a remedy selection phase. The remedy screening phase consists of laboratory- and bench-scale studies performed by Battelle Pacific Northwest laboratories (PNL) under a work order issued by Westinghouse Hanford Company (Westinghouse Hanford). This phase will be used to provide qualitative evaluation of the potential effectiveness of the soil washing technology. The remedy selection phase, consists of pilot-scale testing performed under a separate service contract to be competitively bid under Westinghouse Hanford direction. The remedy selection phase will provide data to support evaluation of the soil washing technology in future feasibility studies for Interim Remedial Measures (IRMs) or final operable unit (OU) remedies. Performance data from these tests will indicate whether applicable or relevant and appropriate requirements (ARARs) or cleanup goals can be met at the site(s) by application of soil washing. The remedy selection tests wig also allow estimation of costs associated with implementation to the accuracy required for the Feasibility Study.

  1. Battery requirements for urban electric vans

    SciTech Connect (OSTI)

    Patil, P.G.; Walsh, W.J.

    1986-01-01T23:59:59.000Z

    The Department of Energy (DOE) has carried out an intensive study of battery requirements for electric vans, and developed a mission-directed goals package for each of the principal battery contenders for this application. These goals were based on the assumption that vehicle range and acceleration must be fully met throughout each battery discharge. Under this assumption, the design point is the end-of-life condition, defined as the last cycle in which both power and energy requirements can be fulfilled. A light-weight, low-rolling-resistance van with an improved version of the ac powertrain being developed by Eaton was chosen as the hypothetical baseline vehicle. A modified FUDS cycle was selected along with assumptions of 3 M/sup 2/ frontal area, 0.37 drag coefficient, and a rolling resistance of 0.008. State-of-art characteristics and design interrelationships were developed for each battery technology, and the degree of advance expected by 1995 was projected. For each battery candidate, a least-cost combination of performance and operating characteristics was determined. The analysis included the peak power vs specific energy and depth-of-discharge (DOD), cycle life vs DOD, cost vs onboard energy and power, and kWh size effects. The resultant R and D goals for the electric van battery are presented, including early-in-life and end-of-life energy over the drive cycle, peak power, battery weight and volume, battery life, costs, and allowable frequency of repair.

  2. Hanford 200 Areas Development Plan

    SciTech Connect (OSTI)

    Rinne, C.A.; Daly, K.S.

    1993-08-01T23:59:59.000Z

    The purpose of the Hanford 200 Areas Development Plan (Development Plan) is to guide the physical development of the 200 Areas (which refers to the 200 East Area, 200 West Area, and 200 Area Corridor, located between the 200 East and 200 West Areas) in accordance with US Department of Energy (DOE) Order 4320.lB (DOE 1991a) by performing the following: Establishing a land-use plan and setting land-use categories that meet the needs of existing and proposed activities. Coordinating existing, 5-year, and long-range development plans and guiding growth in accordance with those plans. Establishing development guidelines to encourage cost-effective development and minimize conflicts between adjacent activities. Identifying site development issues that need further analysis. Integrating program plans with development plans to ensure a logical progression of development. Coordinate DOE plans with other agencies [(i.e., Washington State Department of Ecology (Ecology) and US Environmental Protection Agency (EPA)]. Being a support document to the Hanford Site Development Plan (DOE-RL 1990a) (parent document) and providing technical site information relative to the 200 Areas.

  3. EA-1919: Recycle of Scrap Metals Originating from Radiological Areas

    Broader source: Energy.gov [DOE]

    This Programmatic EA evaluates alternatives for the management of scrap metal originating from DOE radiological control areas, including the proposed action to allow for the recycle of uncontaminated scrap metal that meets the requirements of DOE Order 458.1. (Metals with volumetric radioactive contamination are not included in the scope of this Programmatic EA.)

  4. Working with Radioactive Materials in Clinical Areas -Documentation

    E-Print Network [OSTI]

    Jia, Songtao

    Working with Radioactive Materials in Clinical Areas - Documentation Procedure: 7.54 Created: 2008 ­ Documentation A. Purpose This SOP summarizes records that must be maintained as required by the Rules. Responsibility Authorized User, approved technologist or lab manager ­ maintain records of receipt, use, spill

  5. Disposal requirements for PCB waste

    SciTech Connect (OSTI)

    NONE

    1994-12-01T23:59:59.000Z

    Polychlorinated biphenyls (PCBs) are a class of organic chemicals that had become widely used in industrial applications due to their practical physical and chemical properties. Historical uses of PCBs include dielectric fluids (used in utility transformers, capacitors, etc.), hydraulic fluids, and other applications requiring stable, fire-retardant materials. Due to findings that PCBs may cause adverse health effects and due to their persistence and accumulation in the environment, the Toxic Substances Control Act (TSCA), enacted on october 11, 1976, banned the manufacture of PCBs after 1978 [Section 6(e)]. The first PCB regulations, promulgated at 40 CFR Part 761, were finalized on February 17, 1978. These PCB regulations include requirements specifying disposal methods and marking (labeling) procedures, and controlling PCB use. To assist the Department of Energy (DOE) in its efforts to comply with the TSCA statute and implementing regulations, the Office of Environmental Guidance has prepared the document ``Guidance on the Management of Polychlorinated Biphenyls (PCBs).`` That document explains the requirements specified in the statute and regulations for managing PCBs including PCB use, storage, transport, and disposal. PCB materials that are no longer in use and have been declared a waste must be disposed of according to the requirements found at 40 CFR 761.60. These requirements establish disposal options for a multitude of PCB materials including soil and debris, liquid PCBs, sludges and slurries, containers, transformers, capacitors, hydraulic machines, and other electrical equipment. This Information Brief supplements the PCB guidance document by responding to common questions concerning disposal requirements for PCBs. It is one of a series of Information Briefs pertinent to PCB management issues.

  6. Johnson Noise Thermometry System Requirements

    SciTech Connect (OSTI)

    Britton Jr, Charles L [ORNL; Roberts, Michael [ORNL; Ezell, N Dianne Bull [ORNL; Qualls, A L [ORNL; Holcomb, David Eugene [ORNL

    2013-01-01T23:59:59.000Z

    This document is intended to capture the requirements for the architecture of the developmental electronics for the ORNL-lead drift-free Johnson Noise Thermometry (JNT) project conducted under the Instrumentation, Controls, and Human-Machine Interface (ICHMI) research pathway of the U.S. Department of Energy (DOE) Advanced Small Modular Reactor (SMR) Research and Development (R&D) program. The requirements include not only the performance of the system but also the allowable measurement environment of the probe and the allowable physical environment of the associated electronics. A more extensive project background including the project rationale is available in the initial project report [1].

  7. Project X functional requirements specification

    SciTech Connect (OSTI)

    Holmes, S.D.; Henderson, S.D.; Kephart, R.; Kerby, J.; Kourbanis, I.; Lebedev, V.; Mishra, S.; Nagaitsev, S.; Solyak, N.; Tschirhart, R.; /Fermilab

    2012-05-01T23:59:59.000Z

    Project X is a multi-megawatt proton facility being developed to support a world-leading program in Intensity Frontier physics at Fermilab. The facility is designed to support programs in elementary particle and nuclear physics, with possible applications to nuclear energy research. A Functional Requirements Specification has been developed in order to establish performance criteria for the Project X complex in support of these multiple missions, and to assure that the facility is designed with sufficient upgrade capability to provide U.S. leadership for many decades to come. This paper will briefly review the previously described Functional Requirements, and then discuss their recent evolution.

  8. SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Requirements...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Requirements Management Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Requirements Management Checklist The following checklist is intended to provide system owners,...

  9. Chesapeake Bay Approaches to Baltimore Harbor

    E-Print Network [OSTI]

    with a fleet of 18 vessels but, on June 1, a superior enemy fleet chased them into the Patuxent River is a Navigation Chart of the Patapsco River and Approaches (Chart No. 384), published in 1859 by the U.S. Coast

  10. Baltimore, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty EditCalifornia: EnergyAvignon, France: EnergyBagley PublicMaryland: Energy Resources

  11. Baltimore, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:EzfeedflagBiomass Conversions Inc JumpIM 2011-003

  12. Baltimore, Vermont: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:EzfeedflagBiomass Conversions Inc JumpIM 2011-003Vermont: Energy Resources Jump to:

  13. AREA

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015ofDepartmentDepartment of2 of 5) ALARA TrainingANDREW W.categoricalHSS/UNIONAREA

  14. DEGREE REQUIREMENTS BIOLOGICAL ENGINEERING TECHNOLOGY

    E-Print Network [OSTI]

    Walter, M.Todd

    DEGREE REQUIREMENTS BIOLOGICAL ENGINEERING TECHNOLOGY ENVIRONMENTAL ENGINEERING TECHNOLOGY The curriculum in the technology programs must satisfy the College of Agriculture and Life Sciences (CALS for the technology programs are listed by subject matter in three major categories: (A) Basic Subjects, (B) Advanced

  15. APPLICATION REQUIREMENTS: Admission Applica on

    E-Print Network [OSTI]

    Rainforth, Emma C.

    basis. An interview may be required. MS Educa onal Technology Program: A state issued teaching cer: State issued teaching cer ficate. Three years of professional experience as a teacher:_____________ ­ __________ ­ ________________ Sex: Male Female Street Address Town or City County State Zip Code Home Telephone

  16. Computer Science Graduation Requirements Checklist

    E-Print Network [OSTI]

    Zadok, Erez

    Computer Science Graduation Requirements Checklist ­ Fall 2008 Computer Science Courses Course Gr. Sem. Comments CSE 114 Computer Science I [prerequisite: CSE 110] CSE 214 Computer Science II CSE 215 Foundations of Computer Science CSE 219 Computer Science III CSE 220 Computer Organization CSE 300 Writing

  17. Computer Science Graduation Requirements Checklist

    E-Print Network [OSTI]

    Zadok, Erez

    Computer Science Graduation Requirements Checklist ­ Fall 2009 Computer Science Courses Course Gr. Sem. Comments CSE 114 Computer Science I [prerequisite: CSE 110] CSE 214 Computer Science II CSE 215 Foundations of Computer Science CSE 219 Computer Science III CSE 220 Computer Organization CSE 300 Writing

  18. AMS vs. NWS: Educational Requirements

    E-Print Network [OSTI]

    · Reconstruction of past climates · Climate models · Causes of past and future climate change #12;Capstone methods · Oral, written, and multimedia communication ­ Ability to create and deliver scientific ­ Ability to effectively communicate with technical and lay audiences using scientific evidence #12;Required

  19. ALLOCATION OF REACTIVE SUPPORT REQUIREMENTS

    E-Print Network [OSTI]

    Gross, George

    the voltage setting point s kV of each bus Qk and the voltage profile for the buses c j Q . Recall that Q for these transactions so that all bus voltages meet the specified voltage profile requirements. Consequently load is locally met at the bus. In other words, we assume that at each load bus the power factor is 1

  20. Documentation Requirements for Learning Disabilities

    E-Print Network [OSTI]

    Documentation Requirements for Learning Disabilities Students, faculty, staff, and campus guests wishing to request accommodations due to learning disabilities should refer to the following documentation of interest. C) Documentation must be typed, dated, signed by the evaluator and submitted to ODR

  1. The Program Area Committee Chairperson.

    E-Print Network [OSTI]

    Marshall, Mary; Richardson, Burl B.

    1986-01-01T23:59:59.000Z

    worksheets and others. Prepared by Mary G. Marshall and Burl B. RichardsQ Extension program development specialists, The Texas A&M University System. THE PROGRAM AREA COMMITTEE CHAIRPERSON You Hold an Important Position! Whenever people gather...

  2. Progress Update: M Area Closure

    ScienceCinema (OSTI)

    Cody, Tom

    2012-06-14T23:59:59.000Z

    A progress update of the Recovery Act at work at the Savannah River Site. The celebration of the first area cleanup completion with the help of the Recovery Act.

  3. Protected Water Area System (Iowa)

    Broader source: Energy.gov [DOE]

    The Natural Resource Commission maintains a state plan for the design and establishment of a protected water area system and those adjacent lands needed to protect the integrity of that system. A...

  4. Wellhead Protection Area Act (Nebraska)

    Broader source: Energy.gov [DOE]

    This section regulates activities which can occur on or below the land surface of the area surrounding a wellhead. The purpose of these regulations is to limit well contamination and preserve...

  5. Title I implementation: Status report on nonattainment areas

    SciTech Connect (OSTI)

    Kenkeremath, L.D.; Snyder, T.C.

    1993-01-01T23:59:59.000Z

    Key provisions of Title I of the Clean Air Act Amendments of 1990 (CAAA) focus on bringing cities and other areas into attainment of the National Ambient Air Quality Standards for ozone, carbon monoxide (CO), and fine particulates (PM-10). The CAAA's new classification scheme for pollutant nonattainment areas is based on the relative severity of pollution in these areas and determines the stringency of control measures and the dates by which attainment of the standards will be required. The US Environmental Protection Agency's (EPA's) final rule on air quality designations and classifications, published in late 1991, shows that ozone pollution remains a persistent problem; the number of counties that fail to meet the ozone standard has sharply increased since 1987. In contrast, incidence of PM-10 pollution has decreased; many counties have achieved the PM-10 standard since 1987. Nationwide, the number of CO nonattainment areas has increased, though not dramatically. Many of the new Title I requirements focus on the role of nitrogen oxides (NO[sub x]) in the formation of ground-level ozone. In ozone nonattainment areas and ozone transport regions, Title I generally requires major sources of NO[sub x] to have the same control measures as those that apply to major sources of volatile organic compounds (VOCs). This requirement compels state regulators to adopt an integrated VOC/NO[sub x] control strategy. The NO[sub x] emission standards proposed by state regulators are considerably more stringent than those given in federal guidelines. Both the EPA and the states plan to allow the use of multifacility emissions averaging in state NO[sub x] control strategies, thereby providing industry flexibility. Proposed federal Economic Incentive Program (EIP) rules would also allow sources in states with approved EIPs to use mobile source emission reduction credits to meet certain stationary source emission reduction requirements.

  6. Title I implementation: Status report on nonattainment areas

    SciTech Connect (OSTI)

    Kenkeremath, L.D.; Snyder, T.C.

    1993-01-01T23:59:59.000Z

    Key provisions of Title I of the Clean Air Act Amendments of 1990 (CAAA) focus on bringing cities and other areas into attainment of the National Ambient Air Quality Standards for ozone, carbon monoxide (CO), and fine particulates (PM-10). The CAAA`s new classification scheme for pollutant nonattainment areas is based on the relative severity of pollution in these areas and determines the stringency of control measures and the dates by which attainment of the standards will be required. The US Environmental Protection Agency`s (EPA`s) final rule on air quality designations and classifications, published in late 1991, shows that ozone pollution remains a persistent problem; the number of counties that fail to meet the ozone standard has sharply increased since 1987. In contrast, incidence of PM-10 pollution has decreased; many counties have achieved the PM-10 standard since 1987. Nationwide, the number of CO nonattainment areas has increased, though not dramatically. Many of the new Title I requirements focus on the role of nitrogen oxides (NO{sub x}) in the formation of ground-level ozone. In ozone nonattainment areas and ozone transport regions, Title I generally requires major sources of NO{sub x} to have the same control measures as those that apply to major sources of volatile organic compounds (VOCs). This requirement compels state regulators to adopt an integrated VOC/NO{sub x} control strategy. The NO{sub x} emission standards proposed by state regulators are considerably more stringent than those given in federal guidelines. Both the EPA and the states plan to allow the use of multifacility emissions averaging in state NO{sub x} control strategies, thereby providing industry flexibility. Proposed federal Economic Incentive Program (EIP) rules would also allow sources in states with approved EIPs to use mobile source emission reduction credits to meet certain stationary source emission reduction requirements.

  7. Variable area fuel cell cooling

    DOE Patents [OSTI]

    Kothmann, Richard E. (Churchill Borough, PA)

    1982-01-01T23:59:59.000Z

    A fuel cell arrangement having cooling fluid flow passages which vary in surface area from the inlet to the outlet of the passages. A smaller surface area is provided at the passage inlet, which increases toward the passage outlet, so as to provide more uniform cooling of the entire fuel cell. The cooling passages can also be spaced from one another in an uneven fashion.

  8. Biological Inventory Colorado Canyons National Conservation Area

    E-Print Network [OSTI]

    Biological Inventory of the Colorado Canyons National Conservation Area Prepared by: Joe Stevens .............................. 12 Identify Targeted Inventory Areas

  9. 10 CFR 850 Implementation of Requirements

    SciTech Connect (OSTI)

    Lee, S

    2012-01-05T23:59:59.000Z

    10 CFR 850 defines a contractor as any entity, including affiliated entities, such as a parent corporation, under contract with DOE, including a subcontractor at any tier, with responsibility for performing work at a DOE site in furtherance of a DOE mission. The Chronic Beryllium Disease Prevention Program (CBDPP) applies to beryllium-related activities that are performed at the Lawrence Livermore National Laboratory (LLNL). The CBDPP or Beryllium Safety Program is integrated into the LLNL Worker Safety and Health Program and, thus, implementation documents and responsibilities are integrated in various documents and organizational structures. Program development and management of the CBDPP is delegated to the Environment, Safety and Health (ES&H) Directorate, Worker Safety and Health Functional Area. As per 10 CFR 850, Lawrence Livermore National Security, LLC (LLNS) periodically submits a CBDPP to the National Nuclear Security Administration/Livermore Site Office (NNSA/LSO). The requirements of this plan are communicated to LLNS workers through ES&H Manual Document 14.4, 'Working Safely with Beryllium.' 10 CFR 850 is implemented by the LLNL CBDPP, which integrates the safety and health standards required by the regulation, components of the LLNL Integrated Safety Management System (ISMS), and incorporates other components of the LLNL ES&H Program. As described in the regulation, and to fully comply with the regulation, specific portions of existing programs and additional requirements are identified in the CBDPP. The CBDPP is implemented by documents that interface with the workers, principally through ES&H Manual Document 14.4. This document contains information on how the management practices prescribed by the LLNL ISMS are implemented, how beryllium hazards that are associated with LLNL work activities are controlled, and who is responsible for implementing the controls. Adherence to the requirements and processes described in the ES&H Manual ensures that ES&H practices across LLNL are developed in a consistent manner. Other implementing documents, such as the ES&H Manual, are integral in effectively implementing 10 CFR 850.

  10. Home Area Networks and the Smart Grid

    SciTech Connect (OSTI)

    Clements, Samuel L.; Carroll, Thomas E.; Hadley, Mark D.

    2011-04-01T23:59:59.000Z

    With the wide array of home area network (HAN) options being presented as solutions to smart grid challenges for the home, it is time to compare and contrast their strengths and weaknesses. This white paper examines leading and emerging HAN technologies. The emergence of the smart grid is bringing more networking players into the field. The need for low consistent bandwidth usage differs enough from the traditional information technology world to open the door to new technologies. The predominant players currently consist of a blend of the old and new. Within the wired world Ethernet and HomePlug Green PHY are leading the way with an advantage to HomePlug because it doesn't require installing new wires. In the wireless the realm there are many more competitors but WiFi and ZigBee seem to have the most momentum.

  11. Requirements | Photosynthetic Antenna Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Scienceand Requirements Recently ApprovedReliability

  12. Velocity requirements for causality violation

    E-Print Network [OSTI]

    Giovanni Modanese

    2015-01-18T23:59:59.000Z

    We re-examine the "Regge-Tolman paradox" with reference to some recent experimental results. It is straightforward to find a formula for the velocity v of the moving system required to produce causality violation. This formula typically yields a velocity very close to the speed of light (for instance, v/c > 0.97 for X-shaped microwaves), which raises some doubts about the real physical observability of the violations. We then compute the velocity requirement introducing a delay between the reception of the primary signal and the emission of the secondary. It turns out that in principle for any delay it is possible to find moving observers able to produce active causal violation. This is mathematically due to the singularity of the Lorentz transformations for beta to 1. For a realistic delay due to the propagation of a luminal precursor, we find that causality violations in the reported experiments are still more unlikely (v/c > 0.989), and even in the hypothesis that the superluminal propagation velocity goes to infinity, the velocity requirement is bounded by v/c > 0.62. We also prove that if two macroscopic bodies exchange energy and momentum through superluminal signals, then the swap of signal source and target is incompatible with the Lorentz transformations; therefore it is not possible to distinguish between source and target, even with reference to a definite reference frame.

  13. 100 Areas CERCLA ecological investigations

    SciTech Connect (OSTI)

    Landeen, D.S.; Sackschewsky, M.R.; Weiss, S.

    1993-09-01T23:59:59.000Z

    This document reports the results of the field terrestrial ecological investigations conducted by Westinghouse Hanford Company during fiscal years 1991 and 1992 at operable units 100-FR-3, 100-HR-3, 100-NR-2, 100-KR-4, and 100-BC-5. The tasks reported here are part of the Remedial Investigations conducted in support of the Comprehensive Environmental Response, compensation, and Liability Act of 1980 studies for the 100 Areas. These ecological investigations provide (1) a description of the flora and fauna associated with the 100 Areas operable units, emphasizing potential pathways for contaminants and species that have been given special status under existing state and/or federal laws, and (2) an evaluation of existing concentrations of heavy metals and radionuclides in biota associated with the 100 Areas operable units.

  14. Science Requirements for EAGLE for the E-ELT

    E-Print Network [OSTI]

    C. J. Evans; M. D. Lehnert; J. -G. Cuby; S. L. Morris; A. M. Swinbank; W. D. Taylor; D. M. Alexander; N. P. F. Lorente; Y. Clenet; T. Paumard

    2008-07-18T23:59:59.000Z

    We present an overview of the EAGLE science case, which spans spatially-resolved spectroscopy of targets from five key science areas - ranging from studies of heavily-obscured Galactic star clusters, right out to the first galaxies at the highest redshifts. Here we summarise the requirements adopted for study and also evaluate the availability of natural guide stars in example fields, which will impact on the adaptive optics performance and architecture.

  15. Plutonium focus area: Technology summary

    SciTech Connect (OSTI)

    NONE

    1996-03-01T23:59:59.000Z

    To ensure research and development programs focus on the most pressing environmental restoration and waste management problems at the U.S. Department of Energy (DOE), the Assistant Secretary for the Office of Environmental Management (EM) established a working group in August 1993 to implement a new approach to research and technology development. As part of this approach, EM developed a management structure and principles that led to creation of specific focus areas. These organizations were designed to focus scientific and technical talent throughout DOE and the national scientific community on major environmental restoration and waste management problems facing DOE. The focus area approach provides the framework for inter-site cooperation and leveraging of resources on common problems. After the original establishment of five major focus areas within the Office of Technology Development (EM-50), the Nuclear Materials Stabilization Task Group (NMSTG, EM-66) followed EM-50`s structure and chartered the Plutonium Focus Area (PFA). NMSTG`s charter to the PFA, described in detail later in this book, plays a major role in meeting the EM-66 commitments to the Defense Nuclear Facilities Safety Board (DNFSB). The PFA is a new program for FY96 and as such, the primary focus of revision 0 of this Technology Summary is an introduction to the Focus Area; its history, development, and management structure, including summaries of selected technologies being developed. Revision 1 to the Plutonium Focus Area Technology Summary is slated to include details on all technologies being developed, and is currently planned for release in August 1996. The following report outlines the scope and mission of the Office of Environmental Management, EM-60, and EM-66 organizations as related to the PFA organizational structure.

  16. Seismic Performance Requirements for WETF

    SciTech Connect (OSTI)

    Hans Jordan

    2001-01-01T23:59:59.000Z

    This report develops recommendations for requirements on the Weapons Engineering Tritium Facility (WETF) performance during seismic events. These recommendations are based on fragility estimates of WETF structures, systems, and components that were developed by LANL experts during facility walkdowns. They follow DOE guidance as set forth in standards DOE-STD-1021-93, ''Natural Phenomena Hazards Performance Categorization Guidelines for Structures, Systems, and Components'' and DOE-STD-1020-94, ''Natural Phenomena Hazards Design and Evaluation Criteria for Department of Energy Facilities''. Major recommendations are that WETF institute a stringent combustible loading control program and that additional seismic bracing and anchoring be provided for gloveboxes and heavy equipment.

  17. Stellar Astrophysics Requirements NERSC Forecast

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our Instagram Secretary900Steep Slope Calculator Estimates Cooling andRequirements

  18. 100 Area D4 Project Semi-Annual 2006 Building Completion Report, August 2005 - April 2006

    SciTech Connect (OSTI)

    B. C. Griff

    2006-06-22T23:59:59.000Z

    This report documents the decontamination, decommissioining (D&D) and the demolition of select facilities in the 100 Area of the Hanford Site as required by DOE G 430.1-4.

  19. Cotton Fertilizer Tests in the El Paso Area, 1943-51.

    E-Print Network [OSTI]

    Lyerly, Paul J.; Christensen, Paul D.

    1953-01-01T23:59:59.000Z

    Cotton Fertilizer Tests in the El Paso Area, 1943-51 CONTENTS Page Introduction ...................................................................................................... 3 Many Treatments on Field Plots Included... ............................................................... 8 ............................................................. Potassium Fertilizer Not Required 9 No Yield Increases from Trace Elements ............................................... ... 9...

  20. Approved for Public Release, Distribution Unlimited Flexible and large area electronics (macroelectronics) using

    E-Print Network [OSTI]

    Alam, Muhammad A.

    (augmented) in important electronics applications, then the materials, processes, and devices availableApproved for Public Release, Distribution Unlimited 1 Flexible and large area electronics discuss the application drivers and the technology needs and device performance requirements to enable

  1. Physics Degree Requirements 2008 -2010 Bulletin

    E-Print Network [OSTI]

    Dyer, Bill

    Physics Degree Requirements 2008 -2010 Bulletin Professional Option Student: __________________________ Advisor: ____________________________ Updated 2/8/08 Physics Required Cr Gr Taken PHYS 137 1 ___ ______ PHYS 461 4 ___ ______ PHYS 490 3 ___ ______ Subtotal 47 (C- or better required) Physics Electives (8 cr

  2. HEP/NP Requirements Review 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FES Requirements Review 2014 BES Requirements Review 2014 Requirements Review Reports Case Studies Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638...

  3. DOE-STD-1104 Requirements Crosswalk

    Office of Environmental Management (EM)

    09 to DOE-STD-1104-2014 Requirements Matrix - 1 - No. Section Page Number DOE-STD-1104-2009 Requirement DOE-STD-1104-2014 Requirements Comment Gen DOE-STD-1104-2009 was broadly...

  4. A Requirements Analyst's Apprentice: A Proposal

    E-Print Network [OSTI]

    Reubenstein, Howard

    The Requirements Analyst's APprentice (RAAP) partially automates the modeling process involved in creating a software requirement. It uses knowledge of the specific domain and general experience regarding software requirements ...

  5. Multilevel Lot-Sizing Heuristics and Freezing the Master Production Schedule in Material Requirements Planning Systems

    E-Print Network [OSTI]

    Xie, Jinxing

    March 5, 1997 Revised October 1997 To be published in Production Planning and Control,Vol.9, No.4, 1998 Requirements Planning Systems (Subject Areas: Material Requirements Planning, Master Production Scheduling, Lot Planning, Master Production Scheduling, Lot-Sizing, Simulation) #12;Multilevel Lot-Sizing Heuristics

  6. EA-1177: Salvage/Demolition of 200 West Area, 200 East Area, and 300 Area Steam Plants, Richland, Washington

    Broader source: Energy.gov [DOE]

    This EA evaluates the environmental impacts for the proposal to salvage and demolish the 200 West Area, 200 East Area, and 300 Area steam plants and their associated steam distribution piping...

  7. Studying the Communications Requirements of Electric Utilities...

    Office of Environmental Management (EM)

    Studying the Communications Requirements of Electric Utilities to Inform Federal Smart Grid Policies- Public Meeting Studying the Communications Requirements of Electric Utilities...

  8. Microsoft Word - Requirements_list.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SELECTED LIST OF REQUIREMENTS DESCRIPTION REQUIREMENT APPLICABILITY 1. Federal Motor Carrier Registration 49 CFR 390.19; 390.21 Motor carriers that conduct commercial motor vehicle...

  9. Required Training for Users | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Required Training for Users All APS users, including APS staff, resident users, general users, etc., must complete the required "core" courses listed below before participating in...

  10. Bioinformatics and Genomics Degree Requirements Booklet

    E-Print Network [OSTI]

    dePamphilis, Claude

    Bioinformatics and Genomics Degree Requirements Booklet Fall 2010 #12;Contents Course Requirements Bioinformatics and Genomics Curriculum -------------------------------------------------------8 General #12;Bioinformatics and Genomics Option (BG

  11. Hazardous Waste Minimum Distance Requirements (Connecticut)

    Broader source: Energy.gov [DOE]

    These regulations set minimum distance requirements between certain types of facilities that generate, process, store, and dispose of hazardous waste and other land uses. The regulations require an...

  12. Cold vacuum drying facility design requirements

    SciTech Connect (OSTI)

    IRWIN, J.J.

    1999-07-01T23:59:59.000Z

    This document provides the detailed design requirements for the Spent Nuclear Fuel Project Cold Vacuum Drying Facility. Process, safety, and quality assurance requirements and interfaces are specified.

  13. Montana Natural Areas Act of 1974 (Montana)

    Broader source: Energy.gov [DOE]

    The Montana Natural Areas Act of 1974 provides for the designation and establishment of a system of natural areas in order to preserve the natural ecosystems of these areas. Designated natural...

  14. Variable area light reflecting assembly

    DOE Patents [OSTI]

    Howard, T.C.

    1986-12-23T23:59:59.000Z

    Device is described for tracking daylight and projecting it into a building. The device tracks the sun and automatically adjusts both the orientation and area of the reflecting surface. The device may be mounted in either a wall or roof of a building. Additionally, multiple devices may be employed in a light shaft in a building, providing daylight to several different floors. The preferred embodiment employs a thin reflective film as the reflecting device. One edge of the reflective film is fixed, and the opposite end is attached to a spring-loaded take-up roller. As the sun moves across the sky, the take-up roller automatically adjusts the angle and surface area of the film. Additionally, louvers may be mounted at the light entrance to the device to reflect incoming daylight in an angle perpendicular to the device to provide maximum reflective capability when daylight enters the device at non-perpendicular angles. 9 figs.

  15. Variable area light reflecting assembly

    DOE Patents [OSTI]

    Howard, Thomas C. (Raleigh, NC)

    1986-01-01T23:59:59.000Z

    Device for tracking daylight and projecting it into a building. The device tracks the sun and automatically adjusts both the orientation and area of the reflecting surface. The device may be mounted in either a wall or roof of a building. Additionally, multiple devices may be employed in a light shaft in a building, providing daylight to several different floors. The preferred embodiment employs a thin reflective film as the reflecting device. One edge of the reflective film is fixed, and the opposite end is attached to a spring-loaded take-up roller. As the sun moves across the sky, the take-up roller automatically adjusts the angle and surface area of the film. Additionally, louvers may be mounted at the light entrance to the device to reflect incoming daylight in an angle perpendicular to the device to provide maximum reflective capability when daylight enters the device at non-perpendicular angles.

  16. Logical Structure Extraction from Software Requirements Documents

    E-Print Network [OSTI]

    Czarnecki, Krzysztof

    Documents I. INTRODUCTION Requirements management (RM) tools store and manipu- late software requirementsLogical Structure Extraction from Software Requirements Documents Rehan Rauf, Michal Antkiewicz,mantkiew,kczarnec}@gsd.uwaterloo.ca Abstract--Software requirements documents (SRDs) are often authored in general-purpose rich-text editors

  17. Grantee Checklist for the Inspection & Monitoring Requirement

    Broader source: Energy.gov [DOE]

    This document walks Grantees through the Inspection and Monitoring requirement of the Quality Work Plan.

  18. Chickasaw National Recreational Area, Chickasaw, Oklahoma | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Chickasaw National Recreational Area, Chickasaw, Oklahoma Chickasaw National Recreational Area, Chickasaw, Oklahoma Photo of Comfort Station at the Chickasaw National Recreation...

  19. Quality Assurance Functional Area Qualification Standard - DOE...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    50-2013, Quality Assurance Functional Area Qualification Standard by Administrator The Quality Assurance (QA) Functional Area Qualification Standard (FAQS) establishes common...

  20. Geothermal Literature Review At International Geothermal Area...

    Open Energy Info (EERE)

    Hvalfjordur Fjord area, re: Heat flow References G. Ranalli, L. Rybach (2005) Heat Flow, Heat Transfer And Lithosphere Rheology In Geothermal Areas- Features And Examples...

  1. Geothermal Literature Review At International Geothermal Area...

    Open Energy Info (EERE)

    Latera area, Tuscany, re: Heat Flow References G. Ranalli, L. Rybach (2005) Heat Flow, Heat Transfer And Lithosphere Rheology In Geothermal Areas- Features And Examples...

  2. 300 Area TEDF NPDES Permit Compliance Monitoring Plan

    SciTech Connect (OSTI)

    Loll, C.M.

    1994-10-13T23:59:59.000Z

    This monitoring plan describes the activities and methods that will be employed at the 300 Area Treated Effluent Disposal Facility (TEDF) in order to ensure compliance with the National Discharge Elimination System (NPDES) permit. Included in this document are a brief description of the project, the specifics of the sampling effort, including the physical location and frequency of sampling, the support required for sampling, and the Quality Assurance (QA) protocols to be followed in the sampling procedures.

  3. Operation and Maintenance Manual for the Central Facilities Area Sewage Treatment Plant

    SciTech Connect (OSTI)

    Norm Stanley

    2011-02-01T23:59:59.000Z

    This Operation and Maintenance Manual lists operator and management responsibilities, permit standards, general operating procedures, maintenance requirements and monitoring methods for the Sewage Treatment Plant at the Central Facilities Area at the Idaho National Laboratory. The manual is required by the Municipal Wastewater Reuse Permit (LA-000141-03) the sewage treatment plant.

  4. Technical Area (TA)-54 Area G Nitrate-Salt Waste Container Response...

    Office of Environmental Management (EM)

    Technical Area (TA)-54 Area G Nitrate-Salt Waste Container Response Instructions Technical Area (TA)-54 Area G Nitrate-Salt Waste Container Response Instructions This document was...

  5. Hanford 300 Area steam transition preliminary utility options study

    SciTech Connect (OSTI)

    Olson, N.J.; Weakley, S.A.; Berman, M.J.

    1995-06-01T23:59:59.000Z

    The cost of steam in the Hanford 300 Area is approaching $60 per million Btu; the cost in industry is {approx} $10 per million Btu. The cost of steam in the 300 Area is expected to continue to increase because of the age of the central steam system, load decreases, safety requirements, and environmental regulations. The intent of this report is to evaluate options that would more cost-effectively met the future heating needs of the buildings in the 300 Area. In general, the options fall into two categories: central systems and distributed systems. A representative option from each category was analyzed using the life-cycle cost analysis (LCCA) techniques mandated by the federal government. The central plant option chosen for evaluation was the existing central steam plant modified to allow continued operation. The distributed option chosen was a dedicated heating system for each building.

  6. Technical Safety Requirements for the Waste Storage Facilities

    SciTech Connect (OSTI)

    Larson, H L

    2007-09-07T23:59:59.000Z

    This document contains Technical Safety Requirements (TSR) for the Radioactive and Hazardous Waste Management (RHWM) WASTE STORAGE FACILITIES, which include Area 612 (A612) and the Decontamination and Waste Treatment Facility (DWTF) Storage Area at Lawrence Livermore National Laboratory (LLNL). The TSRs constitute requirements regarding the safe operation of the WASTE STORAGE FACILITIES. These TSRs are derived from the Documented Safety Analysis for the Waste Storage Facilities (DSA) (LLNL 2006). The analysis presented therein determined that the WASTE STORAGE FACILITIES are low-chemical hazard, Hazard Category 2 non-reactor nuclear facilities. The TSRs consist primarily of inventory limits and controls to preserve the underlying assumptions in the hazard and accident analyses. Further, appropriate commitments to safety programs are presented in the administrative controls sections of the TSRs. The WASTE STORAGE FACILITIES are used by RHWM to handle and store hazardous waste, TRANSURANIC (TRU) WASTE, LOW-LEVEL WASTE (LLW), mixed waste, California combined waste, nonhazardous industrial waste, and conditionally accepted waste generated at LLNL as well as small amounts from other U.S. Department of Energy (DOE) facilities, as described in the DSA. In addition, several minor treatments (e.g., drum crushing, size reduction, and decontamination) are carried out in these facilities. The WASTE STORAGE FACILITIES are located in two portions of the LLNL main site. A612 is located in the southeast quadrant of LLNL. The A612 fenceline is approximately 220 m west of Greenville Road. The DWTF Storage Area, which includes Building 693 (B693), Building 696 Radioactive Waste Storage Area (B696R), and associated yard areas and storage areas within the yard, is located in the northeast quadrant of LLNL in the DWTF complex. The DWTF Storage Area fenceline is approximately 90 m west of Greenville Road. A612 and the DWTF Storage Area are subdivided into various facilities and storage areas, consisting of buildings, tents, other structures, and open areas as described in Chapter 2 of the DSA. Section 2.4 of the DSA provides an overview of the buildings, structures, and areas in the WASTE STORAGE FACILITIES, including construction details such as basic floor plans, equipment layout, construction materials, controlling dimensions, and dimensions significant to the hazard and accident analysis. Chapter 5 of the DSA documents the derivation of the TSRs and develops the operational limits that protect the safety envelope defined for the WASTE STORAGE FACILITIES. This TSR document is applicable to the handling, storage, and treatment of hazardous waste, TRU WASTE, LLW, mixed waste, California combined waste, nonhazardous industrial waste, and conditionally accepted waste received or generated in the WASTE STORAGE FACILITIES. Section 5, Administrative Controls, contains those Administrative Controls necessary to ensure safe operation of the WASTE STORAGE FACILITIES. Programmatic Administrative Controls are in Section 5.6. This Introduction to the WASTE STORAGE FACILITIES TSRs is not part of the TSR limits or conditions and contains no requirements related to WASTE STORAGE FACILITIES operations or to the safety analyses of the DSA.

  7. Basic science research to support the nuclear material focus area

    SciTech Connect (OSTI)

    Boak, J. M. (Jeremy M.); Eller, P. Gary; Chipman, N. A.; Castle, P. M.

    2002-01-01T23:59:59.000Z

    The Department of Energy's (DOE'S) Office of Environmental Management (EM) is responsible for managing more than 760,000 metric tons of nuclear material that is excess to the current DOE weapons program, as a result of shutdown of elements of the weapons program, mainly during the 1990s. EMowned excess nuclear material comprises a variety of material types, including uranium, plutonium, other actinides and other radioactive elements in numerous forms, all of which must be stabilized for storage and ultimate disposition. Much of this quantity has been in storage for many years. Shutdown of DOE sites and facilities requires removal of nuclear material and consolidation at other sites, and may be delayed by the lack of available technology. Within EM, the Office of Science and Technology (OST) is dedicated to providing timely, relevant technology to accelerate completion and reduce cleanup cost of the DOE environmental legacy. OST is organized around five focus areas, addressing crucial areas of end-user-defined technology need. The Focus Areas regularly identify potential technical solutions for which basic scientific research is needed to determine if the technical solution can be developed and deployed. To achieve a portfolio of projects that is balanced between near-term priorities driven by programmatic risks (such as site closure milestones) and long-term, high-consequence needs that depend on extensive research and development, OST has established the Environmental Management Science Program (EMSP) to develop the scientific basis for solutions to long-term site needs. The EMSP directs calls for proposals to address scientific needs of the focus areas. Needs are identified and validated annually by individual sites in workshops conducted across the complex. The process captures scope and schedule requirements of the sites, so that focus areas can identify technology that can be delivered to sites in time to complete site cleanup. The Nuclear Material Focus Area (NMFA) has identified over two hundred science and technology needs, of which more than thirty are science needs.

  8. Basic Science Research to Support the Nuclear Materials Focus Area

    SciTech Connect (OSTI)

    Chipman, N. A.; Castle, P. M.; Boak, J. M.; Eller, P. G.

    2002-02-26T23:59:59.000Z

    The Department of Energy's (DOE's) Office of Environmental Management (EM) is responsible for managing more than 760,000 metric tons of nuclear material that is excess to the current DOE weapons program, as a result of shutdown of elements of the weapons program, mainly during the 1990s. EMowned excess nuclear material comprises a variety of material types, including uranium, plutonium, other actinides and other radioactive elements in numerous forms, all of which must be stabilized for storage and ultimate disposition. Much of this quantity has been in storage for many years. Shutdown of DOE sites and facilities requires removal of nuclear material and consolidation at other sites, and may be delayed by the lack of available technology. Within EM, the Office of Science and Technology (OST) is dedicated to providing timely, relevant technology to accelerate completion and reduce cleanup cost of the DOE environmental legacy. OST is organized around five focus areas, addressing crucial areas of end-user-defined technology need. The Focus Areas regularly identify potential technical solutions for which basic scientific research is needed to determine if the technical solution can be developed and deployed. To achieve a portfolio of projects that is balanced between near-term priorities driven by programmatic risks (such as site closure milestones) and long-term, high-consequence needs that depend on extensive research and development, OST has established the Environmental Management Science Program (EMSP) to develop the scientific basis for solutions to long-term site needs. The EMSP directs calls for proposals to address scientific needs of the focus areas. Needs are identified and validated annually by individual sites in workshops conducted across the complex. The process captures scope and schedule requirements of the sites, so that focus areas can identify technology that can be delivered to sites in time to complete site cleanup. The Nuclear Material Focus Area (NMFA) has identified over two hundred science and technology needs, of which more than thirty are science needs.

  9. Personal Background andPersonal Background and AreasAreas ofof InterestInterest

    E-Print Network [OSTI]

    Boehning, Dankmar

    General Topics CurrentCurrent AreasAreas ofof InterestInterest ResearchResearch AreasAreas inin Preperation InterestInterest ResearchResearch AreasAreas inin PreperationPreperation #12;Personal BackgroundHistory BesidesBesides cooperatingcooperating inin severalseveral projectsprojects in SEin SE AsiaAsia oneone

  10. Lead Coolant Test Facility - Design Concept and Requirements

    SciTech Connect (OSTI)

    Soli Khericha, Ph. D.

    2011-08-01T23:59:59.000Z

    The Idaho National Laboratory prepared a preliminary technical and functional requirements (T&FR), thermal hydraulic design and cost estimate for a lead coolant test facility. The purpose of this small scale facility is to simulate lead coolant fast reactor (LFR) coolant flow in an open lattice geometry core using seven electrical rods and liquid lead or lead-bismuth eutectic. Based on review of current world lead or lead-bismuth test facilities and research need listed in the Generation IV Roadmap, five broad areas of requirements are identified in this paper: (1) Develop and Demonstrate Feasibility of Submerged Heat Exchanger; (2) Develop and Demonstrate Open-lattice Flow in Electrically Heated Core; (3) Develop and Demonstrate Chemistry Control; (4) Demonstrate Safe Operation; and (5) Provision for Future Testing Across these five broad areas are supported by twenty-one specific requirements. The purpose of this facility is to focus the lead fast reactor community domestically on the requirements for the next unique state of the art test facility. The facility thermal hydraulic design is based on the maximum simulated core power using seven electrical heater rods of 420 kW; average linear heat generation rate of 300 W/cm. The core inlet temperature for liquid lead or Pb/Bi eutectic is 4200C. The design includes approximately seventy-five data measurements such as pressure, temperature, and flow rates. The preliminary estimated cost of construction of the facility is $3.7M (in 2006 $). It is also estimated that the facility will require two years to be constructed and ready for operation.

  11. Tanks focus area. Annual report

    SciTech Connect (OSTI)

    Frey, J.

    1997-12-31T23:59:59.000Z

    The U.S. Department of Energy Office of Environmental Management is tasked with a major remediation project to treat and dispose of radioactive waste in hundreds of underground storage tanks. These tanks contain about 90,000,000 gallons of high-level and transuranic wastes. We have 68 known or assumed leaking tanks, that have allowed waste to migrate into the soil surrounding the tank. In some cases, the tank contents have reacted to form flammable gases, introducing additional safety risks. These tanks must be maintained in the safest possible condition until their eventual remediation to reduce the risk of waste migration and exposure to workers, the public, and the environment. Science and technology development for safer, more efficient, and cost-effective waste treatment methods will speed up progress toward the final remediation of these tanks. The DOE Office of Environmental Management established the Tanks Focus Area to serve as the DOE-EM`s technology development program for radioactive waste tank remediation in partnership with the Offices of Waste Management and Environmental Restoration. The Tanks Focus Area is responsible for leading, coordinating, and facilitating science and technology development to support remediation at DOE`s four major tank sites: the Hanford Site in Washington State, Idaho National Engineering and Environmental Laboratory in Idaho, Oak Ridge Reservation in Tennessee, and the Savannah River Site in South Carolina. The technical scope covers the major functions that comprise a complete tank remediation system: waste retrieval, waste pretreatment, waste immobilization, tank closure, and characterization of both the waste and tank. Safety is integrated across all the functions and is a key component of the Tanks Focus Area program.

  12. Analysis of Daylighting Requirements within ASHRAE Standard 90.1

    SciTech Connect (OSTI)

    Athalye, Rahul A.; Xie, YuLong; Liu, Bing; Rosenberg, Michael I.

    2013-08-01T23:59:59.000Z

    Pacific Northwest National Laboratory (PNNL), under the Building Energy Codes Program (BECP) funded by U.S. Department of Energy (DOE), provides support to the ASHRAE/IES/IESNA Standard 90.1(Standard 90.1) Standing Standards Project Committee (SSPC 90.1) and its subcommittees. In an effort to provide the ASHRAE SSPC 90.1 with data that will improve the daylighting and fenestration requirements in the Standard, PNNL collaborated with Heschong Mahone Group (HMG), now part of TRC Solutions. Combining EnergyPlus, a whole-building energy simulation software developed by DOE, with Radiance, a highly accurate illumination modeling software (Ward 1994), the daylighting requirements within Standard 90.1 were analyzed in greater detail. The initial scope of the study was to evaluate the impact of the fraction of window area compared to exterior wall area (window-to-wall ratio (WWR)) on energy consumption when daylighting controls are implemented. This scope was expanded to study the impact of fenestration visible transmittance (VT), electric lighting controls and daylighted area on building energy consumption.

  13. History of 100-B Area

    SciTech Connect (OSTI)

    Wahlen, R.K.

    1989-10-01T23:59:59.000Z

    The initial three production reactors and their support facilities were designated as the 100-B, 100-D, and 100-F areas. In subsequent years, six additional plutonium-producing reactors were constructed and operated at the Hanford Site. Among them was one dual-purpose reactor (100-N) designed to supply steam for the production of electricity as a by-product. Figure 1 pinpoints the location of each of the nine Hanford Site reactors along the Columbia River. This report documents a brief description of the 105-B reactor, support facilities, and significant events that are considered to be of historical interest. 21 figs.

  14. Resource Areas of Texas: Land.

    E-Print Network [OSTI]

    Godfrey, Curtis L.; Carter, Clarence R.; McKee, Gordon S.

    1967-01-01T23:59:59.000Z

    Prairie (Coastal ~~~(l), soils are less acid and some are calcareous. Main series: lrictoria, Orelia, Clareville. ~ight, acid sands and darker, loamy to clayey soils-some $;dine and sodic-lie in a narrow band along the coast. Main aeries: Harris...). Mai series: Truce, Waurika, Brown, moderately deep 11 shallow, calcareous, clay1 a1 oils are alg common. Main series: (: 1 to alk nts; somt Bonti. ey soils >wens. over sh Bottomlands-minor areas or brown to clam gray, loam1 1 Main senes 3...

  15. Texas Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2,AUDITCalifornia Sector:Shrenik IndustriesStateTagsTexas Area Jump to:

  16. Focus Areas | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov.Energy02.pdf7 OPAM Flash2011-37 OPAM DOE O 413.2B Admin ChgFocus Areas Focus

  17. Surrounding Area Restaurants...Hungry

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2, 2015 - January 16, 2015 Summary ofAboutDepartmentControlSurrounding Area

  18. Geothermal resource evaluation of the Yuma area

    SciTech Connect (OSTI)

    Poluianov, E.W.; Mancini, F.P.

    1985-11-29T23:59:59.000Z

    This report presents an evaluation of the geothermal potential of the Yuma, Arizona area. A description of the study area and the Salton Trough area is followed by a geothermal analysis of the area, a discussion of the economics of geothermal exploration and exploitation, and recommendations for further testing. It was concluded economic considerations do not favor geothermal development at this time. (ACR)

  19. Annual Report for Los Alamos National Laboratory Technical Area 54, Area G Disposal Facility - Fiscal Year 2011

    SciTech Connect (OSTI)

    French, Sean B. [Los Alamos National Laboratory; Shuman, Rob [WPS: WASTE PROJECTS AND SERVICES

    2012-05-22T23:59:59.000Z

    As a condition to the Disposal Authorization Statement issued to Los Alamos National Laboratory (LANL or the Laboratory) on March 17, 2010, a comprehensive performance assessment and composite analysis maintenance program must be implemented for the Technical Area 54, Area G disposal facility. Annual determinations of the adequacy of the performance assessment and composite analysis are to be conducted under the maintenance program to ensure that the conclusions reached by those analyses continue to be valid. This report summarizes the results of the fiscal year 2011 annual review for Area G. Revision 4 of the Area G performance assessment and composite analysis was issued in 2008 and formally approved in 2009. These analyses are expected to provide reasonable estimates of the long-term performance of Area G and, hence, the disposal facility's ability to comply with Department of Energy (DOE) performance objectives. Annual disposal receipt reviews indicate that smaller volumes of waste will require disposal in the pits and shafts at Area G relative to what was projected for the performance assessment and composite analysis. The future inventories are projected to decrease modestly for the pits but increase substantially for the shafts due to an increase in the amount of tritium that is projected to require disposal. Overall, however, changes in the projected future inventories of waste are not expected to compromise the ability of Area G to satisfy DOE performance objectives. The Area G composite analysis addresses potential impacts from all waste disposed of at the facility, as well as other sources of radioactive material that may interact with releases from Area G. The level of knowledge about the other sources included in the composite analysis has not changed sufficiently to call into question the validity of that analysis. Ongoing environmental surveillance activities are conducted at, and in the vicinity of, Area G. However, the information generated by many of these activities cannot be used to evaluate the validity of the performance assessment and composite analysis models because the monitoring data collected are specific to operational releases or address receptors that are outside the domain of the performance assessment and composite analysis. In general, applicable monitoring data are supportive of some aspects of the performance assessment and composite analysis. Several research and development (R and D) efforts have been initiated under the performance assessment and composite analysis maintenance program. These investigations are designed to improve the current understanding of the disposal facility and site, thereby reducing the uncertainty associated with the projections of the long-term performance of Area G. The status and results of R and D activities that were undertaken in fiscal year 2011 are discussed in this report. Special analyses have been conducted to determine the feasibility of disposing of specific waste streams, to address proposed changes in disposal operations, and to consider the impacts of changes to the models used to conduct the performance assessment and composite analysis. These analyses are described and the results of the evaluations are summarized in this report. The Area G disposal facility consists of Material Disposal Area (MDA) G and the Zone 4 expansion area. To date, all disposal operations at Area G have been confined to MDA G. Material Disposal Area G is scheduled to undergo final closure in 2015; disposal of waste in the pits and shafts is scheduled to end in 2013. In anticipation of the closure of MDA G, plans are being made to ship the majority of the waste generated at LANL to off-site locations for disposal. It is not clear at this time if waste that will be disposed of at LANL will be placed in Zone 4 or if disposal operations will move to a new location at the Laboratory. Separately, efforts to optimize the final cover used in the closure of MDA G are underway; a final cover design different than that adopted for the performance assessment and composite analy

  20. F- and H-area Sewage Sludge Application Sites: Groundwater monitoring report. Second quarter 1993

    SciTech Connect (OSTI)

    Not Available

    1993-10-01T23:59:59.000Z

    Samples from the four wells at the F-Area Sewage Sludge Application Site (FSS wells) and the three wells at the H-Area Sewage Sludge Application Site (HSS wells) are analyzed quarterly for constituents as required by South Carolina Department of Health and Environmental Control Construction Permit 12,076 and, as requested, for other constituents as part of the Savannah River Site Groundwater Monitoring Program. Annual analyses for other constituents, primarily metals, also are required by the permit. Currently, no permit-required analytes exceed standards at the F- and H-Area Sewage Sludge Application Sites. Tritium and aluminum have been the primary nonpermit constituents exceeding standards at the F-Area Sewage Sludge Application Site. These constituents were not analyzed second quarter 1993. Other constituents also have exceeded standards at this site, but only sporadically, and none of those were analyzed second quarter 1993.

  1. F- and H-Area Sewage Sludge Application Sites groundwater monitoring report

    SciTech Connect (OSTI)

    Not Available

    1993-07-01T23:59:59.000Z

    Samples from the four wells at the F-Area Sewage Sludge Application Site (FSS wells) and the three wells at the H-Area Sewage Sludge Application Site (HSS wells) are analyzed quarterly for constituents as required by South Carolina Department of Health and Environmental Control Construction Permit 12,076 and, as requested, for other constituents as part of the Savannah River Site Groundwater Monitoring Program. Annual analyses for other constituents, primarily metals, also are required by the permit. Historically and currently, no permit-required analytes exceed standards at the F- and H-Area Sewage Sludge Application Sites except iron, lead, and manganese, which occur in elevated concentrations frequently in FSS wells and occasionally in HSS wells. Tritium and aluminum are the primary nonpermit constituents that exceed standards at the F-Area Sewage Sludge Application Site. Other constituents also exceed standards at this site but only sporadically.

  2. Information requirements of self-managing teams

    SciTech Connect (OSTI)

    Van Aken, E.M.

    1992-12-31T23:59:59.000Z

    In response to the significant challenges organizations face today, many managers have put in place continuous improvement efforts to help the organization on enhance its competitive position. A key element of continuous improvement efforts is employee involvement, and one of the most complex, mature, and effective forms of employee involvement is self-managing teams. A self-managing team is a group of employees, usually eight to fifteen, which is responsible for planning, implementing, controlling, and improving work processes. There are many characteristics of self-managing teams which are discussed frequently in the literature and are common topics of seminars and workshops on SMTs, including the role of the first-line supervisor, the structure of teams, the training necessary, and the pay system for SMTs. However, one area which has not been as widely researched is the role of information - what types of information do self-managing teams need? This paper addresses this question. Results from a multiple case study research project focusing on the information requirements of SMTs are presented. Specifically, seven types of information SMTs need are identified, as well as general characteristics of the information system. By information system, I mean very broadly, the system (both formal and informal) which provides information of any kind to a self-managing team. The results of this research can be thought of as ``design features`` for an information system to support SMTs. Practicing managers can use these design features in two ways: they can design them into beginning SMT efforts; or, for SMTs already established, managers can compare them to the existing information system and adjust accordingly.

  3. Information requirements of self-managing teams

    SciTech Connect (OSTI)

    Van Aken, E.M.

    1992-01-01T23:59:59.000Z

    In response to the significant challenges organizations face today, many managers have put in place continuous improvement efforts to help the organization on enhance its competitive position. A key element of continuous improvement efforts is employee involvement, and one of the most complex, mature, and effective forms of employee involvement is self-managing teams. A self-managing team is a group of employees, usually eight to fifteen, which is responsible for planning, implementing, controlling, and improving work processes. There are many characteristics of self-managing teams which are discussed frequently in the literature and are common topics of seminars and workshops on SMTs, including the role of the first-line supervisor, the structure of teams, the training necessary, and the pay system for SMTs. However, one area which has not been as widely researched is the role of information - what types of information do self-managing teams need This paper addresses this question. Results from a multiple case study research project focusing on the information requirements of SMTs are presented. Specifically, seven types of information SMTs need are identified, as well as general characteristics of the information system. By information system, I mean very broadly, the system (both formal and informal) which provides information of any kind to a self-managing team. The results of this research can be thought of as design features'' for an information system to support SMTs. Practicing managers can use these design features in two ways: they can design them into beginning SMT efforts; or, for SMTs already established, managers can compare them to the existing information system and adjust accordingly.

  4. Report Wildland Fire Area Hazard

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Scienceand Requirements Recently ApprovedReliability TechnologyRenewalReport Period: EIA IDReport

  5. Research Areas | Nuclear Science | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Scienceand Requirements Recently ApprovedReliabilityPrincipal InvestigatorsResearchNational Laser

  6. Physics Degree Requirements 2008-2010 Bulletin

    E-Print Network [OSTI]

    Dyer, Bill

    Physics Degree Requirements 2008-2010 Bulletin Interdisciplinary Option Student: ___________________ Advisor: ________________ Option: ________________ Updated 2/8/08 Physics Required Cr Gr Taken PHYS 137 1) Physics Electives (3 cr; 253 and 300) PHYS _____ ___ ___ ______ PHYS _____ ___ ___ ______ PHYS

  7. Salt Lake City- High Performance Buildings Requirement

    Broader source: Energy.gov [DOE]

    Salt Lake City's mayor issued an executive order in July 2005 requiring that all public buildings owned and controlled by the city be built or renovated to meet the requirements of LEED "silver"...

  8. City of Dubuque- Solar Thermal Licensing Requirement

    Broader source: Energy.gov [DOE]

    The City of Dubuque requires a Solar Thermal License in order for a person to install a solar thermal project on a home or business. The requirement does not apply to solar photovoltaics. The...

  9. Requirements, possible alternatives & international NEUTRON SCATTERING

    E-Print Network [OSTI]

    Dimeo, Robert M.

    Requirements, possible alternatives & international NEUTRON SCATTERING DETECTORS for Rob Dimeo NIST neutron scattering instruments are the most demanding require background low #12;#12;The Helium-3 Supply Crisis ­ Alternative Techniques to Helium-3 based Detectors for Neutron Scattering Applications

  10. Maintain all SAA weekly inspection forms in your laboratory. Forms must be readily available for review. Satellite Accumulation Area -Weekly Inspection Form

    E-Print Network [OSTI]

    to the corresponding date of the SAA inspection. A. Good Condition - Containers in good condition, properly labeled containment. No Corrective Action Required. B. Missing Labels - Containers not labeled in compliance with SAA storage requirements. Satellite Accumulation Area ­ Waste Storage Requirements Label Requirements: · Waste

  11. ORIGINAL ARTICLE Information requirements analysis for holonic

    E-Print Network [OSTI]

    ORIGINAL ARTICLE Information requirements analysis for holonic manufacturing systems in a virtual and development of holonic manu- facturing systems requires careful, and sometimes risky, decision making, the authors propose a methodology for a holonic manufacturing systems requirement analysis that is based

  12. FCEDS General Education Requirements (Updated 2013)

    E-Print Network [OSTI]

    Mayfield, John

    FCEDS General Education Requirements (Updated 2013) This proposal outlines a plan that would allow a transfer student to apply an Associate of Arts or Associate of Science degree to meet the General Education requirements of the Family and Consumer Sciences Education and Studies (FCEDS) curriculum. The required

  13. Deriving Security Requirements from Crosscutting Threat Descriptions

    E-Print Network [OSTI]

    Haley, Charles B.

    Deriving Security Requirements from Crosscutting Threat Descriptions Charles B. Haley, Robin C representing threats as crosscutting concerns aids in determining the effect of security requirements on the functional requirements. Assets (objects that have value in a system) are first enumerated, and then threats

  14. Clean Air Act Requirements: Uranium Mill Tailings

    E-Print Network [OSTI]

    EPA'S Clean Air Act Requirements: Uranium Mill Tailings Radon Emissions Rulemaking Reid J. Rosnick requirements for operating uranium mill tailings (Subpart W) Status update on Subpart W activities Outreach/Communications #12;3 EPA Regulatory Requirements for Operating Uranium Mill Tailings (Clean Air Act) · 40 CFR 61

  15. Ashland Area Support Substation Project

    SciTech Connect (OSTI)

    Not Available

    1992-06-01T23:59:59.000Z

    The Bonneville Power Administration (BPA) provides wholesale electric service to the City of Ashland (the City) by transferring power over Pacific Power Light Company's (PP L) 115-kilovolt (kV) transmission lines and through PP L's Ashland and Oak Knoll Substations. The City distributes power over a 12.5-kV system which is heavily loaded during winter peak periods and which has reached the limit of its ability to serve peak loads in a reliable manner. Peak loads under normal winter conditions have exceeded the ratings of the transformers at both the Ashland and Oak Knoll Substations. In 1989, the City modified its distribution system at the request of PP L to allow transfer of three megawatts (MW's) of electric power from the overloaded Ashland Substation to the Oak Knoll Substation. In cooperation with PP L, BPA installed a temporary 6-8 megavolt-amp (MVA) 115-12.5-kV transformer for this purpose. This additional transformer, however, is only a temporary remedy. BPA needs to provide additional, reliable long-term service to the Ashland area through additional transformation in order to keep similar power failures from occurring during upcoming winters in the Ashland area. The temporary installation of another 20-MVA mobile transformer at the Ashland Substation and additional load curtailment are currently being studied to provide for sustained electrical service by the peak winter period 1992. Two overall electrical plans-of-service are described and evaluated in this report. One of them is proposed for action. Within that proposed plan-of-service are location options for the substation. Note that descriptions of actions that may be taken by the City of Ashland are based on information provided by them.

  16. Remedial investigation concept plan for the groundwater operable units at the chemical plant area and the ordnance works area, Weldon Spring, Missouri

    SciTech Connect (OSTI)

    NONE

    1999-07-15T23:59:59.000Z

    The U.S. Department of Energy (DOE) and the U.S. Department of the Army (DA) are conducting cleanup activities at two properties--the DOE chemical plant area and the DA ordnance works area (the latter includes the training area)--located in the Weldon Spring area in St. Charles County, Missouri. These areas are on the National Priorities List (NPL), and cleanup activities at both areas are conducted in accordance with the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), as amended. DOE and DA are conducting a joint remedial investigation (RI) and baseline risk assessment (BRA) as part of the remedial investigation/feasibility study (RI/FS) for the groundwater operable units for the two areas. This joint effort will optimize further data collection and interpretation efforts and facilitate overall remedial decision making since the aquifer of concern is common to both areas. A Work Plan issued jointly in 1995 by DOE and the DA discusses the results of investigations completed at the time of preparation of the report. The investigations were necessary to provide an understanding of the groundwater system beneath the chemical plant area and the ordnance works area. The Work Plan also identifies additional data requirements for verification of the evaluation presented.

  17. Technical Safety Requirements for the Waste Storage Facilities

    SciTech Connect (OSTI)

    Laycak, D T

    2008-06-16T23:59:59.000Z

    This document contains Technical Safety Requirements (TSR) for the Radioactive and Hazardous Waste Management (RHWM) WASTE STORAGE FACILITIES, which include Area 625 (A625) and the Decontamination and Waste Treatment Facility (DWTF) Storage Area at Lawrence Livermore National Laboratory (LLNL). The TSRs constitute requirements regarding the safe operation of the WASTE STORAGE FACILITIES. These TSRs are derived from the 'Documented Safety Analysis for the Waste Storage Facilities' (DSA) (LLNL 2008). The analysis presented therein determined that the WASTE STORAGE FACILITIES are low-chemical hazard, Hazard Category 2 non-reactor nuclear facilities. The TSRs consist primarily of inventory limits and controls to preserve the underlying assumptions in the hazard and accident analyses. Further, appropriate commitments to safety programs are presented in the administrative controls sections of the TSRs. The WASTE STORAGE FACILITIES are used by RHWM to handle and store hazardous waste, TRANSURANIC (TRU) WASTE, LOW-LEVEL WASTE (LLW), mixed waste, California combined waste, nonhazardous industrial waste, and conditionally accepted waste generated at LLNL as well as small amounts from other U.S. Department of Energy (DOE) facilities, as described in the DSA. In addition, several minor treatments (e.g., size reduction and decontamination) are carried out in these facilities. The WASTE STORAGE FACILITIES are located in two portions of the LLNL main site. A625 is located in the southeast quadrant of LLNL. The A625 fenceline is approximately 225 m west of Greenville Road. The DWTF Storage Area, which includes Building 693 (B693), Building 696 Radioactive Waste Storage Area (B696R), and associated yard areas and storage areas within the yard, is located in the northeast quadrant of LLNL in the DWTF complex. The DWTF Storage Area fenceline is approximately 90 m west of Greenville Road. A625 and the DWTF Storage Area are subdivided into various facilities and storage areas, consisting of buildings, tents, other structures, and open areas as described in Chapter 2 of the DSA. Section 2.4 of the DSA provides an overview of the buildings, structures, and areas in the WASTE STORAGE FACILITIES, including construction details such as basic floor plans, equipment layout, construction materials, controlling dimensions, and dimensions significant to the hazard and accident analysis. Chapter 5 of the DSA documents the derivation of the TSRs and develops the operational limits that protect the safety envelope defined for the WASTE STORAGE FACILITIES. This TSR document is applicable to the handling, storage, and treatment of hazardous waste, TRU WASTE, LLW, mixed waste, California combined waste, nonhazardous industrial waste, and conditionally accepted waste received or generated in the WASTE STORAGE FACILITIES. Section 5, Administrative Controls, contains those Administrative Controls necessary to ensure safe operation of the WASTE STORAGE FACILITIES. Programmatic Administrative Controls are in Section 5.6.

  18. Technical Safety Requirements for the Waste Storage Facilities

    SciTech Connect (OSTI)

    Laycak, D T

    2010-03-05T23:59:59.000Z

    This document contains Technical Safety Requirements (TSR) for the Radioactive and Hazardous Waste Management (RHWM) WASTE STORAGE FACILITIES, which include Area 625 (A625) and the Decontamination and Waste Treatment Facility (DWTF) Storage Area at Lawrence Livermore National Laboratory (LLNL). The TSRs constitute requirements regarding the safe operation of the WASTE STORAGE FACILITIES. These TSRs are derived from the Documented Safety Analysis for the Waste Storage Facilities (DSA) (LLNL 2009). The analysis presented therein determined that the WASTE STORAGE FACILITIES are low-chemical hazard, Hazard Category 2 non-reactor nuclear facilities. The TSRs consist primarily of inventory limits and controls to preserve the underlying assumptions in the hazard and accident analyses. Further, appropriate commitments to safety programs are presented in the administrative controls sections of the TSRs. The WASTE STORAGE FACILITIES are used by RHWM to handle and store hazardous waste, TRANSURANIC (TRU) WASTE, LOW-LEVEL WASTE (LLW), mixed waste, California combined waste, nonhazardous industrial waste, and conditionally accepted waste generated at LLNL as well as small amounts from other U.S. Department of Energy (DOE) facilities, as described in the DSA. In addition, several minor treatments (e.g., size reduction and decontamination) are carried out in these facilities. The WASTE STORAGE FACILITIES are located in two portions of the LLNL main site. A625 is located in the southeast quadrant of LLNL. The A625 fenceline is approximately 225 m west of Greenville Road. The DWTF Storage Area, which includes Building 693 (B693), Building 696 Radioactive Waste Storage Area (B696R), and associated yard areas and storage areas within the yard, is located in the northeast quadrant of LLNL in the DWTF complex. The DWTF Storage Area fenceline is approximately 90 m west of Greenville Road. A625 and the DWTF Storage Area are subdivided into various facilities and storage areas, consisting of buildings, tents, other structures, and open areas as described in Chapter 2 of the DSA. Section 2.4 of the DSA provides an overview of the buildings, structures, and areas in the WASTE STORAGE FACILITIES, including construction details such as basic floor plans, equipment layout, construction materials, controlling dimensions, and dimensions significant to the hazard and accident analysis. Chapter 5 of the DSA documents the derivation of the TSRs and develops the operational limits that protect the safety envelope defined for the WASTE STORAGE FACILITIES. This TSR document is applicable to the handling, storage, and treatment of hazardous waste, TRU WASTE, LLW, mixed waste, California combined waste, nonhazardous industrial waste, and conditionally accepted waste received or generated in the WASTE STORAGE FACILITIES. Section 5, Administrative Controls, contains those Administrative Controls necessary to ensure safe operation of the WASTE STORAGE FACILITIES. Programmatic Administrative Controls are in Section 5.4.

  19. Areas Participating in the Oxygenated Gasoline Program (Released in the STEO July 1999)

    Reports and Publications (EIA)

    1999-01-01T23:59:59.000Z

    Section 211(m) of the Clean Air Act (42 U.S.C. 7401-7671q) requires that gasoline containing at least 2.7% oxygen by weight is to be used in the wintertime in those areas of the county that exceed the carbon monoxide National Ambient Air Quality Standards (NAAQS). The winter oxygenated gasoline program applies to all gasoline sold in the larger of the Consolidated Metropolitan Statistical Area (CMSA) or Metropolitan Statistical Area (MSA) in which the nonattainment area is located.

  20. Baseline risk assessment for groundwater operable units at the Chemical Plant Area and the Ordnance Works Area, Weldon Spring, Missouri

    SciTech Connect (OSTI)

    NONE

    1999-07-14T23:59:59.000Z

    The U.S. Department of Energy (DOE) and the U.S. Department of the Army (DA) are evaluating conditions in groundwater and springs at the DOE chemical plant area and the DA ordnance works area near Weldon Spring, Missouri. The two areas are located in St. Charles County, about 48 km (30 mi) west of St. Louis. The 88-ha (217-acre) chemical plant area is chemically and radioactively contaminated as a result of uranium-processing activities conducted by the U.S. Atomic Energy Commission in the 1950s and 1960s and explosives-production activities conducted by the U.S. Army (Army) in the 1940s. The 6,974-ha (17,232-acre) ordnance works area is primarily chemically contaminated as a result of trinitrotoluene (TNT) and dinitrotoluene (DNT) manufacturing activities during World War II. This baseline risk assessment (BRA) is being conducted as part of the remedial investigation/feasibility study (RUFS) required under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) of 1980, as amended. The purpose of the BRA is to evaluate potential human health and ecological impacts from contamination associated with the groundwater operable units (GWOUs) of the chemical plant area and ordnance works area. An RI/FS work plan issued jointly in 1995 by the DOE and DA (DOE 1995) analyzed existing conditions at the GWOUs. The work plan included a conceptual hydrogeological model based on data available when the report was prepared; this model indicated that the aquifer of concern is common to both areas. Hence, to optimize further data collection and interpretation efforts, the DOE and DA have decided to conduct a joint RI/BRA. Characterization data obtained from the chemical plant area wells indicate that uranium is present at levels slightly higher than background, with a few concentrations exceeding the proposed U.S. Environmental Protection Agency (EPA) maximum contaminant level (MCL) of 20 {micro}g/L (EPA 1996c). Concentrations of other radionuclides (e.g., radium and thorium) were measured at back-ground levels and were eliminated from further consideration. Chemical contaminants identified in wells at the chemical plant area and ordnance works area include nitroaromatic compounds, metals, and inorganic anions. Trichloroethylene (TCE) and 1,2-dichloroethylene (1,2 -DCE) have been detected recently in a few wells near the raffinate pits at the chemical plant.

  1. Characterization Report for the 92-Acre Area of the Area 5 Radioactive Waste Management Site, Nevada Test Site, Nevada

    SciTech Connect (OSTI)

    Bechtel Nevada; U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office

    2006-06-01T23:59:59.000Z

    The U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office manages two low-level Radioactive Waste Management Sites at the Nevada Test Site. The Area 5 RWMS uses engineered shallow-land burial cells to dispose of packaged waste. This report summarizes characterization and monitoring work pertinent to the 92-Acre Area in the southeast part of the Area 5 Radioactive Waste Management Sites. The decades of characterization and assessment work at the Area 5 RWMS indicate that the access controls, waste operation practices, site design, final cover design, site setting, and arid natural environment contribute to a containment system that meets regulatory requirements and performance objectives for the short- and long-term protection of the environment and public. The available characterization and Performance Assessment information is adequate to support design of the final cover and development of closure plans. No further characterization is warranted to demonstrate regulatory compliance. U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office is proceeding with the development of closure plans for the six closure units of the 92-Acre Area.

  2. IDENTIFICATION OF DOE'S POST-CLOSURE MONITORING NEEDS AND REQUIREMENTS

    SciTech Connect (OSTI)

    M.A. Ebadian, Ph.D.

    1999-01-01T23:59:59.000Z

    The 2006 plan sets an ambitious agenda for the U.S. Department of Energy (DOE), Office of Environmental Management (EM) and the remediation of sites contaminated by decades of nuclear weapons production activities. The plan's primary objective is to reduce overall clean up costs by first eliminating the environmental problems that are most expensive to control and safely maintain. In the context of the 2006 Plan, closure refers to the completion of area or facility specific cleanup projects. The cleanup levels are determined by the planned future use of the site or facility. Use restrictions are still undecided for most sites but are highly probable to exclude residential or agricultural activities. Most of the land will be remediated to ''industrial use'' levels with access restrictions and some areas will be closed-off through containment. Portions of the site will be reserved for waste disposal, either as a waste repository or the in-situ immobilization of contaminated soil and groundwater, and land use will be restricted to waste disposal only. The land used for waste disposal will require monitoring and maintenance activities after closure. Most of the land used for industrial use may also require such postclosure activities. The required postclosure monitoring and maintenance activities will be imposed by regulators and stakeholders. Regulators will not approve closure plans without clearly defined monitoring methods using approved technologies. Therefore, among all other more costly and labor-intensive closure-related activities, inadequate planning for monitoring and lack of appropriate monitoring technologies can prevent closure. The purpose of this project is to determine, document, and track the current and evolving postclosure monitoring requirements at DOE-EM sites. This information will aid CMST-CP in guiding its postclosure technology development and deployment efforts.

  3. Introduction - DOE Directives, Delegations, and Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chp 1, Introduction by John Makepeace Functional areas: Work Processes The objective of this Guide is to improve the quality of cost estimates and further strengthen the DOE...

  4. Environmental audit, Bonneville Power Administration, lower Columbia area

    SciTech Connect (OSTI)

    Not Available

    1990-11-01T23:59:59.000Z

    This report documents the results of the US Department of Energy's (DOE's) Environmental Audit conducted by the DOE Headquarters Office of Environmental Audit within the Bonneville Power Administration's (BPA's) Lower Columbia Area. The BPA facilities included in the Audit are the Ross Complex in Vancouver, Washington; the substations of North Bonneville, North Bonneville Annex, Camas, and Longview within the state of Washington; and the Acton and Troutdale Substations within the state of Oregon. The independent Audit was conducted by a team of professionals from DOE and contractors. The purpose of the Audit is to provide the Secretary of Energy, Admiral James D. Watkins, Ret., with the status of environmental programs within BPA's Lower Columbia Area. The Environmental Audit team identified 25 findings dealing with the lack of conformance with federal and state laws and regulations and DOE Orders, and 7 findings in which BMPs were not attained. Although all findings require corrective action, none required cessation of operations or reflect situations that present an immediate risk to public health or the environment. The Audit team noted inadequacies in PCB management included storage, labeling, reporting, and spill control. The most significant causal factors for the findings include lack of policy implementation throughout the Lower Columbia Area, inadequate training of personnel charged with environmental protection, lack of standard operating procedures for many programs, lack of reviews and appraisals, and an inaccurate perception of low risk for environmental concerns.

  5. Game Preserves and Closed Areas (Montana)

    Broader source: Energy.gov [DOE]

    Game preserves and closed areas exist within the state of Montana for the protection of all the game animals and birds. Construction and development is limited in these areas. Currently, only three...

  6. Critical Areas of State Concern (Maryland)

    Broader source: Energy.gov [DOE]

    This legislation designates the Chesapeake Bay, other Atlantic Coastal Bays, and their tributaries and adjacent lands as critical areas of state concern. It is state policy to protect these areas...

  7. Electricity Suppliers' Service Area Assignments (Indiana)

    Broader source: Energy.gov [DOE]

    To promote efficiency and avoid waste and duplication, rural and unincorporated areas of Indiana are divided into geographic areas, to be assigned to an electricity provider that will have the sole...

  8. FY 2012 Real Property Deferred, Actual, and Required Maintenance...

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications FY 2013 Real Property Deferred, Actual, and Required Maintenance Reporting Requirement Real Property Maintenance Reporting Requirement Memorandum...

  9. Supplemental design requirements document, Multifunction Waste Tank Facility, Project W-236A. Revision 1

    SciTech Connect (OSTI)

    Groth, B.D.

    1995-01-11T23:59:59.000Z

    The Multi-Function Waste Tank Facility (MWTF) consists of four, nominal 1 million gallon, underground double-shell tanks, located in the 200-East area, and two tanks of the same capacity in the 200-West area. MWTF will provide environmentally safe storage capacity for wastes generated during remediation/retrieval activities of existing waste storage tanks. This document delineates in detail the information to be used for effective implementation of the Functional Design Criteria requirements.

  10. Optimization Online - All Areas Submissions - January 2011

    E-Print Network [OSTI]

    All Areas Submissions - January 2011. Linear, Cone and ... Anders Skajaa, John Bagterp Jørgensen, Per Christian Hansen. Convex and Nonsmooth ...

  11. D-Area Preliminary Hazards Analysis

    SciTech Connect (OSTI)

    Blanchard, A. [Westinghouse Savannah River Company, AIKEN, SC (United States); Paik, I.R. [Westinghouse Safety Management Solutions, , ()

    1998-04-01T23:59:59.000Z

    A comprehensive review of hazards associated with the D-Area was performed to identify postulated event scenarios.

  12. Geographic Information System At International Geothermal Area...

    Open Energy Info (EERE)

    search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Geographic Information System At International Geothermal Area, Indonesia (Nash, Et Al., 2002) Exploration...

  13. Optimization Online - All Areas Submissions - February 2011

    E-Print Network [OSTI]

    Stochastic Optimization for Power System Configuration with Renewable Energy in Remote Areas Ludwig Kuznia, Bo Zeng, Grisselle Centeno, Zhixin Miao.

  14. Considering LEDs for Street and Area Lighting

    Broader source: Energy.gov [DOE]

    View Jim Brodrick's keynote video from the September 2009 IES Street and Area Lighting Conference in Philadelphia.

  15. FY 2013 Real Property Deferred, Actual, and Required Maintenance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Real Property Deferred, Actual, and Required Maintenance Reporting Requirement FY 2013 Real Property Deferred, Actual, and Required Maintenance Reporting Requirement FY 2013 DARM...

  16. Local control of area-preserving maps

    E-Print Network [OSTI]

    Cristel Chandre; Michel Vittot; Guido Ciraolo

    2008-09-01T23:59:59.000Z

    We present a method of control of chaos in area-preserving maps. This method gives an explicit expression of a control term which is added to a given area-preserving map. The resulting controlled map which is a small and suitable modification of the original map, is again area-preserving and has an invariant curve whose equation is explicitly known.

  17. Original article Photosynthesis, leaf area and productivity

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Original article Photosynthesis, leaf area and productivity of 5 poplar clones during; The stem volume and biomass (stem + branches) production, net photosynthesis of mature leaves and leaf area found in volume production, woody biomass production, total leaf area and net photosynthesis. Above

  18. Introduction Marine protected areas (MPA's) are

    E-Print Network [OSTI]

    67(1) 1 Introduction Marine protected areas (MPA's) are an important tool for managing fisheries protected area is "any area of the marine environ- ment that has been reserved by Federal, State, tribal, territorial, or local laws or regulations to provide lasting protection for part or all of the natural

  19. Safety of magnetic fusion facilities: Requirements

    SciTech Connect (OSTI)

    NONE

    1996-05-01T23:59:59.000Z

    This Standard identifies safety requirements for magnetic fusion facilities. Safety functions are used to define outcomes that must be achieved to ensure that exposures to radiation, hazardous materials, or other hazards are maintained within acceptable limits. Requirements applicable to magnetic fusion facilities have been derived from Federal law, policy, and other documents. In addition to specific safety requirements, broad direction is given in the form of safety principles that are to be implemented and within which safety can be achieved.

  20. Mixed waste focus area alternative technologies workshop

    SciTech Connect (OSTI)

    Borduin, L.C.; Palmer, B.A.; Pendergrass, J.A. [Los Alamos National Lab., NM (United States). Technology Analysis Group

    1995-05-24T23:59:59.000Z

    This report documents the Mixed Waste Focus Area (MWFA)-sponsored Alternative Technology Workshop held in Salt Lake City, Utah, from January 24--27, 1995. The primary workshop goal was identifying potential applications for emerging technologies within the Options Analysis Team (OAT) ``wise`` configuration. Consistent with the scope of the OAT analysis, the review was limited to the Mixed Low-Level Waste (MLLW) fraction of DOE`s mixed waste inventory. The Los Alamos team prepared workshop materials (databases and compilations) to be used as bases for participant review and recommendations. These materials derived from the Mixed Waste Inventory Report (MWIR) data base (May 1994), the Draft Site Treatment Plan (DSTP) data base, and the OAT treatment facility configuration of December 7, 1994. In reviewing workshop results, the reader should note several caveats regarding data limitations. Link-up of the MWIR and DSTP data bases, while representing the most comprehensive array of mixed waste information available at the time of the workshop, requires additional data to completely characterize all waste streams. A number of changes in waste identification (new and redefined streams) occurred during the interval from compilation of the data base to compilation of the DSTP data base with the end result that precise identification of radiological and contaminant characteristics was not possible for these streams. To a degree, these shortcomings compromise the workshop results; however, the preponderance of waste data was linked adequately, and therefore, these analyses should provide useful insight into potential applications of alternative technologies to DOE MLLW treatment facilities.

  1. Alternatives to incineration. Technical area status report

    SciTech Connect (OSTI)

    Schwinkendorf, W.E. [BDM Federal, Inc., Albuquerque, NM (United States); McFee, J.; Devarakonda, M. [International Technology Corp., Albuquerque, NM (United States); Nenninger, L.L.; Fadullon, F.S. [Science Applications International Corp., Gaithersburg, MD (United States); Donaldson, T.L. [Oak Ridge National Lab., TN (United States); Dickerson, K. [Oak Ridge National Lab., TN (United States); [Rocky Flats Environmental Technology Site, Golden, CO (United States)

    1995-04-01T23:59:59.000Z

    Recently, the DOE`s Mixed Waste Integrated Program (MWIP) (superseded by the Mixed Waste Focus Area) initiated an evaluation of alternatives to incineration to identify technologies capable of treating DOE organically contaminated mixed wastes and which may be more easily permitted. These technologies have the potential of alleviating stakeholder concerns by decreasing off-gas volurties and the associated emissions of particulates, volatilized metals and radionuclides, PICs, NO{sub x}, SO{sub x}, and recombination products (dioxins and furans). Ideally, the alternate technology would be easily permitted, relatively omnivorous and effective in treating a variety of wastes with varying constituents, require minimal pretreatment or characterization, and be easy to implement. In addition, it would produce secondary waste stream volumes significantly smaller than the original waste stream, and would minimize the environmental health and safety effects on workers and the public. The purpose of this report is to provide an up-to-date (as of early 1995) compendium of iternative technologies for designers of mixed waste treatment facilities, and to identify Iternate technologies that may merit funding for further development. Various categories of non-thermal and thermal technologies have been evaluated and are summarized in Table ES-1. Brief descriptions of these technologies are provided in Section 1.7 of the Introduction. This report provides a detailed description of approximately 30 alternative technologies in these categories. Included in the report are descriptions of each technology; applicable input waste streams and the characteristics of the secondary, or output, waste streams; the current status of each technology relative to its availability for implementation; performance data; and costs. This information was gleaned from the open literature, governments reports, and discussions with principal investigators and developers.

  2. SCHOOL OF DENTAL HYGIENE Program Requirements Campus: UMICH RG = Requirement Group

    E-Print Network [OSTI]

    Shyy, Wei

    SCHOOL OF DENTAL HYGIENE Program Requirements Campus: UMICH RG = Requirement Group Career: UDH RQ = Requirement Program: 00005 LN = Line RG 4337 SCHOOL OF DENTAL HYGIENE REQUIREMENTS Effective FA04/1510 (09 Optional Pass/Fail (make no exceptions here) RQ 4003 Courses Transferred to the School of Dental Hygiene

  3. Core Science Requirement Final Document Page 1 THE CORE SCIENCE REQUIREMENT and

    E-Print Network [OSTI]

    Lagalante, Anthony F.

    Core Science Requirement ­ Final Document ­ Page 1 THE CORE SCIENCE REQUIREMENT and MENDEL SCIENCE EXPERIENCE COURSES Core requirement of 2 semesters of science with laboratory; requirement to be met by the end of the sophomore year Rationale Science literacy is an integral part of the intellectual

  4. Building HVAC Requirements Overview Page 4-1 4 Building HVAC Requirements

    E-Print Network [OSTI]

    Building HVAC Requirements ­ Overview Page 4-1 4 Building HVAC Requirements 4.1 Overview 4 conditioning (HVAC) systems. The requirements are presented in this chapter so that it may serve as a single. 2008 Residential Compliance Manual August 2009 #12;Page 4-2 Building HVAC Requirements ­ Overview 4

  5. Automotive Turbocharging: Industrial Requirements and Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    performance will be difficult to achieve requires a proper understanding of the trade-offs and engine effects and impacts must be part of turbocharger development...

  6. The Schedule - DOE Directives, Delegations, and Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    funds are required. This chapter will briefly discuss some scheduling basics. g4301-1chp12.pdf -- PDF Document, 60 KB Writer: John Makepeace Subjects: Administration Management...

  7. Network Requirements Workshop - Documents and Background Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Requirements Review Reports Case Studies News & Publications ESnet News Publications and Presentations Galleries ESnet Awards and Honors Blog ESnet Live Home Science Engagement...

  8. Goals and Requirements | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    sustainable procurement requirements Ensure 15% of building stock meet sustainability principles by 2015 Design new facilities to reach net-zero energy use by 2030 Back to Top...

  9. Requirements Governing Water Quality Standards (West Virginia)

    Broader source: Energy.gov [DOE]

    This rule establishes the requirements governing the discharge or deposit of sewage, industrial wastes and other wastes into waters and establishes water quality standards.

  10. Allocating Variability and Reserve Requirements (Presentation)

    SciTech Connect (OSTI)

    Kirby, B.; King, J.; Milligan, M.

    2011-10-01T23:59:59.000Z

    This presentation describes how you could conceivably allocate variability and reserve requirements, including how to allocate aggregation benefits. Conclusions of this presentation are: (1) Aggregation provides benefits because individual requirements are not 100% correlated; (2) Method needed to allocate reduced requirement among participants; (3) Differences between allocation results are subtle - (a) Not immediately obvious which method is 'better'; (b) Many are numerically 'correct', they sum to the physical requirement; (c) Many are not 'fair', Results depend on sub-aggregation and/or the order individuals are included; and (4) Vector allocation method is simple and fair.

  11. Supervisory Training Requirements | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Requirements The Office of Learning and Workforce Development has developed an inventory of training and developmental activities that will meet the supervisory training...

  12. The Access Almanac: Solar Parking Requirements

    E-Print Network [OSTI]

    Shoup, Donald

    2012-01-01T23:59:59.000Z

    these requirements. Solar panels in parking lots will startto install solar panels on their parking lots the option tosupport solar panels. Therefore, parking lots will generate

  13. DOE Office of Science Exascale Requirements Reviews

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2020-2025 The three DOE Office of Advanced Scientific Computing (ASCR) High Performance Computing (HPC) Facilities are conducting a series of six Exascale Requirements...

  14. NERSC/DOE FES Requirements Workshop Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations Workshop Presentations Large Scale Computing and Storage Requirements for Fusion Energy Sciences An FES ASCR NERSC Workshop August 3-4, 2010 Sort by: Default |...

  15. Federal / State Legislative & Regulatory Changes Required for...

    Energy Savers [EERE]

    Issues Federal and State Blending Restrictions Action by ASTM NCWM to address higher ethanol blends Federal State Legislative & Regulatory Changes Required for Introduction of...

  16. FEMINIST STUDIES MAJOR REQUIREMENTS Name _______________________________________ Email_____________________

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    of intended graduation ____________________ Feminist Studies students must complete 11 courses within year) FMST 195 (required for Thesis or Project) Indicate topic: 9/17/12 #12;

  17. Transmission Reassignment Reporting Requirement - April 2, 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CommitteesTeams Customer Training Interconnection Notices Rates Standards of Conduct Tariff TF Web Based Training Transmission Reassignment Reporting Requirement This notice...

  18. Facility Safety - DOE Directives, Delegations, and Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Change, Safety, The order establishes facility and programmatic safety requirements for nuclear and explosives safety design criteria, fire protection, criticality safety,...

  19. International Development Studies Additional Requirement Form

    E-Print Network [OSTI]

    International Development Studies Additional Requirement Form The IDS additional program email. You may find additional scheduled possibilities by looking at the International Programs

  20. NERSC/DOE FES Requirements Workshop Logistics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Logistics Workshop Logistics Large Scale Computing and Storage Requirements for Fusion Energy Sciences An FES ASCR NERSC Workshop August 3-4, 2010 Goals This workshop is being...

  1. NERSC/DOE NP Requirements Workshop Logistics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hotel Hotel Arrangements Large Scale Computing and Storage Requirements for Nuclear Physics May 26-27, 2011 Location The workshop will be held at Hyatt Regency Bethesda One...

  2. NERSC/DOE ASCR Requirements Workshop Logistics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Logistics Workshop Logistics Large Scale Computing and Storage Requirements for Advanced Scientific Computing Research January 5-6, 2011 Location The workshop will be held at...

  3. NERSC/DOE NP Requirements Workshop Agenda

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Agenda Workshop Agenda Large Scale Computing and Storage Requirements for Nuclear Physics May 26-27, 2011 Chesapeak Suites Wireless Network: Hyatt Bethesda Meeting Room Meeting...

  4. NERSC/DOE ASCR Requirements Workshop Agenda

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Agenda Workshop Agenda Large Scale Computing and Storage Requirements for Advanced Scientific Computing Research ASCR NERSC Workshop January 5-6, 2011 >> Download and View these...

  5. Microsoft Word - Directives Requiring Additional Documentation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Review and Approval of Nuclear Facility Safety Basis Documents (Documented Safety Analysis and Technical Safety Requirements 10 DOE-STD-1186-2004 Specific...

  6. Cooperating Agencies in Implementing the Procedural Requirements...

    Energy Savers [EERE]

    of Federal and non-federal cooperating agencies in the preparation of analyses and documentation required by the National Environmental Policy Act (NEPA), and to ensure that...

  7. Documentation Requirements for Pressurized Experiment Equipment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Documentation Requirements for Pressurized Experiment Apparatus PSSC NOTE01 15-Jan-2013 When bringing a piece of apparatus to the APS for an experiment that will involve pressure,...

  8. SRS K-AREA MATERIAL STORAGE - EXPANDING CAPABILITIES

    SciTech Connect (OSTI)

    Koenig, R.

    2013-07-02T23:59:59.000Z

    In support of the Department of Energy’s continued plans to de-inventory and reduce the footprint of Cold War era weapons’ material production sites, the K-Area Material Storage (KAMS) facility, located in the K-Area Complex (KAC) at the Savannah River Site reservation, has expanded since its startup authorization in 2000 to accommodate DOE’s material consolidation mission. During the facility’s growth and expansion, KAMS will have expanded its authorization capability of material types and storage containers to allow up to 8200 total shipping containers once the current expansion effort completes in 2014. Recognizing the need to safely and cost effectively manage other surplus material across the DOE Complex, KAC is constantly evaluating the storage of different material types within K area. When modifying storage areas in KAC, the Documented Safety Analysis (DSA) must undergo extensive calculations and reviews; however, without an extensive and proven security posture the possibility for expansion would not be possible. The KAC maintains the strictest adherence to safety and security requirements for all the SNM it handles. Disciplined Conduct of Operations and Conduct of Projects are demonstrated throughout this historical overview highlighting various improvements in capability, capacity, demonstrated cost effectiveness and utilization of the KAC as the DOE Center of Excellence for safe and secure storage of surplus SNM.

  9. Facility effluent monitoring plan determinations for the 300 Area facilities

    SciTech Connect (OSTI)

    Nickels, J.M.

    1991-08-01T23:59:59.000Z

    Facility Effluent Monitoring Plan determinations were conducted for the Westinghouse Hanford Company 300 Area facilities on the Hanford Site. These determinations have been prepared in accordance with A Guide For Preparing Hanford Site Facility Effluent Monitoring Plans. Sixteen Westinghouse Hanford Company facilities in the 300 Area were evaluated: 303 (A, B, C, E, F, G, J and K), 303 M, 306 E, 308, 309, 313, 333, 334 A, and the 340 Waste Handling Facility. The 303, 306, 313, 333, and 334 facilities Facility Effluent Monitoring Plan determinations were prepared by Columbia Energy and Environmental Services of Richland, Washington. The 340 Central Waste Complex determination was prepared by Bovay Northwest, Incorporated. The 308 and 309 facility determinations were prepared by Westinghouse Handford Company. Of the 16 facilities evaluated, 3 will require preparation of a Facility effluent Monitoring Plan: the 313 N Fuels Fabrication Support Building, 333 N Fuels fabrication Building, and the 340 Waste Handling Facility. 26 refs., 5 figs., 10 tabs.

  10. Connectivity and resilience of coral reef metapopulations in marine protected areas: matching empirical efforts to predictive needs

    E-Print Network [OSTI]

    2009-01-01T23:59:59.000Z

    Coral Reefs (2009) 28:327–337 DOI 10.1007/s00338-Connectivity and resilience of coral reef metapopulations inpro- tected areas (MPAs) on coral reefs require prediction

  11. F- and H-Area Sewage Sludge Application Sites Groundwater Monitoring Report: Third quarter 1993

    SciTech Connect (OSTI)

    Not Available

    1994-01-01T23:59:59.000Z

    Samples from the four wells at the F-Area Sewage Sludge Application Site (FSS wells) and the three wells at the H-Area Sewage Sludge Application Site (HSS wells) are analyzed quarterly for constituents as required by South Carolina Department of Health and Environmental Control Construction Permit 12,076 and, as requested, for other constituents as part of the Savannah River Site Groundwater Monitoring Program. Annual analyses for other constituents, primarily metals, also are required by the permit. Currently, iron, lead, and manganese are the only permit-required analytes that exceed standards at the F- and H-Area Sewage Sludge Application Sites. Tritium and aluminum are the nonpermit constituents exceeding standards. Other constituents have exceeded standards at this site previously, but only sporadically.

  12. Conduct of Operations Requirements for DOE Facilities

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1990-07-09T23:59:59.000Z

    "To provide requirements and guidelines for Departmental Elements, including the National Nuclear Security Administration (NNSA), to use in developing directives, plans, and/or procedures relating to the conduct of operations at DOE facilities. The implementation of these requirements and guidelines should result in improved quality and uniformity of operations. Change 2, 10-23-2001. Canceled by DOE O 422.1.

  13. Humidity Implications for Meeting Residential Ventilation Requirements

    E-Print Network [OSTI]

    1 LBNL-62182 Humidity Implications for Meeting Residential Ventilation Requirements Iain S. Walker for Meeting Residential Ventilation Requirements ABSTRACT In 2003 ASHRAE approved the nation's first residential ventilation standard, ASHRAE Standard 62.2. Because meeting this standard can significantly change

  14. EARTH SCIENCES Lower-Division Requirements

    E-Print Network [OSTI]

    Constable, Steve

    2012-2013 EARTH SCIENCES Lower-Division Requirements Math 20A_____ 20B_____ 20C_____ 20D (BILD 3) _____ SIO 50* _____ Group A: Earth Science Upper-Division Core Requirements (all courses _____ Introduction to Geophysics SIO 104 _____ Paleobiology and History of Life* Group B: Upper-Division Earth

  15. SECTION GS1020 CONSTRUCTION CODE REQUIREMENTS

    E-Print Network [OSTI]

    Zhang, Yuanlin

    101, Life Safety Code; 5. National Fire Protection Association Codes and Standards; 6. ANSI/ASME A17SECTION GS1020 ­ CONSTRUCTION CODE REQUIREMENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings includes the following: 1. Construction code requirements for all construction at Texas Tech University. 1

  16. Formal Requirements Engineering: Learning from the students

    E-Print Network [OSTI]

    Gibson, J. Paul

    Formal Requirements Engineering: Learning from the students J. Paul Gibson, Department of Computer engineering using formal methods, where we advo- cate a multiple methods approach in which students get requirements engineering rather than become experts in one particular (formal) method. The need for formality

  17. Modelling the Contribution Structure Underlying Requirements

    E-Print Network [OSTI]

    Gotel, Olly

    Modelling the Contribution Structure Underlying Requirements Orlena C. Z. Gotel & Anthony C, and hence trace, those who have contributed in the production and refinement of the requirements illustrate the relationship between RT and software quality. In Section 3, we show the restricted impact

  18. CH2M Hill Hanford Group, Inc. Standards and Requirements Identification Document (SRID) Requirements Management System and Requirements Specification

    SciTech Connect (OSTI)

    JOHNSON, A.L.

    2000-11-30T23:59:59.000Z

    The current Tank Farm Contractor (TFC) for the U. S. Department of Energy, Office of River Protection (ORP), River Protection Project (RPP), CH2M Hill Hanford Group, Inc. (CHG), will use a computer based requirements management system. The system will serve as a tool to assist in identifying, capturing, and maintaining the Standards/Requirements Identification Document (S/RID) requirements and links to implementing procedures and other documents. By managing requirements as one integrated set, CHG will be able to carry out its mission more efficiently and effectively. CHG has chosen the Dynamic Object Oriented Requirements System (DOORS{trademark}) as the preferred computer based requirements management system. Accordingly, the S/RID program will use DOORS{trademark}. DOORS{trademark} will replace the Environmental Requirements Management Interface (ERMI) system as the tool for S/RID data management. The DOORS{trademark} S/RID test project currently resides on the DOORSTM test server. The S/RID project will be migrated to the DOORS{trademark} production server. After the migration the S/RID project will be considered a production project and will no longer reside on the test server.

  19. Determination of delaminated area of coated steel using electrochemical impedance spectroscopy

    E-Print Network [OSTI]

    Alwohaibi, Mohammed Abdullaziz

    1992-01-01T23:59:59.000Z

    DETERMINATION OF DELAMINATED AREA OF COATED STEEL USING ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY A Thesis by MOHAMMED ABDULLAZIZ ALWOHAIBI Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE December 1992 Major Subject: Chemical Engineering DETERMINATION OF DELAMINATED AREA OF COATED STEEL USING ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY A Thesis by MOHAMMED ABDULLAZIZ ALWOHAIBI Appmved...

  20. Determination of delaminated area of coated steel using electrochemical impedance spectroscopy 

    E-Print Network [OSTI]

    Alwohaibi, Mohammed Abdullaziz

    1992-01-01T23:59:59.000Z

    DETERMINATION OF DELAMINATED AREA OF COATED STEEL USING ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY A Thesis by MOHAMMED ABDULLAZIZ ALWOHAIBI Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE December 1992 Major Subject: Chemical Engineering DETERMINATION OF DELAMINATED AREA OF COATED STEEL USING ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY A Thesis by MOHAMMED ABDULLAZIZ ALWOHAIBI Appmved...

  1. An analysis of the economic importance of cotton to the Central Gulf Coast area of Texas

    E-Print Network [OSTI]

    Prochaska, Fred J

    1966-01-01T23:59:59.000Z

    AN ANALYSIS OF THE ECONOMIC IMPORTANCE OF COTTON TO THE CENTRAL GULF COAST AREA OF TEXAS A Thesis By Frederick James Prochaska Submitted to the Graduate College of the Texas AAM University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE August 1966 Major Subject: Agricultural Economics AN ANALYSIS OF THE ECONOMIC IMPORTANCE OF COTTON TO THE CENTRAL GULF COAST AREA OF TEXAS A Thesis By' Frederick James Prochaska Approved as to style snd content by: C...

  2. The measurement of contact areas and temperature during frictional sliding of Tennessee sandstone 

    E-Print Network [OSTI]

    Teufel, Lawrence William

    1976-01-01T23:59:59.000Z

    THE MEASUREMENT OF CONTACT AREAS AND TEMPERATURE DURING FRICTIONAL SLIDING OF TENNESSEE SANDSTONE A Thesis by LAWRENCE WILLIAM TEUFEL Submit';ed to the Graduate College of Texas ASM University in partial fulfillment of the requirements... for the degree of MASTERS OF SCIENCE August 1976 Major Subiect: Geology THE MEASUREMENT OF CONTACT AREAS AND TEMPERATURES DURING FRICTIONAL SLIDING OF TENNESSEE SANDSTONE A Thesis by LAWRENCE WILLIAM TEUFEL Approved as to sty1e and content by: Cha rma...

  3. Petrology and diagenesis of the Lower Wilcox sandstones, North Milton field area, Harris County, Texas

    E-Print Network [OSTI]

    Miller, Gregory Radford

    1982-01-01T23:59:59.000Z

    PETROLOGY AND DIAGENESIS OF THE LOWER WILCOX SANDSTONES, NORTH MILTON FIELD AREA, HARRIS COUNTY, TEXAS A Thesis by GREGORY RADFORD MILLER Submitted to the Graduate College of Texas ASM University in partial fulfillment of the requirement... for the degree of MASTER OF SCIENCE December 198Z Major Subject: Geology PETROLOGY AND DIAGENESIS OF THE LOWER WILCOX SANDSTONES, NORTH MILTON FIELD AREA, HARRIS COUNTY, TEXAS A Thesis by GREGORY RADFORD MILLER Approved as to style and content by...

  4. F-Area Hazardous Waste Management Facility Correction Action Report, Third and Fourth Quarter 1998, Volumes I and II

    SciTech Connect (OSTI)

    Chase, J.

    1999-04-23T23:59:59.000Z

    The groundwater in the uppermost aquifer beneath the F-Area Hazardous Waste Management Facility (HWMF), also known as the F-Area Seepage Basins, at the Savannah Site (SRS) is monitored periodically for selected hazardous and radioactive constituents. This report presents the results of the required groundwater monitoring program.

  5. H-Area Hazardous Waste Management Facility Corrective Action Report, Third and Fourth Quarter 1998, Volumes I and II

    SciTech Connect (OSTI)

    Chase, J.

    1999-04-23T23:59:59.000Z

    The groundwater in the uppermost aquifer beneath the H-Area Hazardous Waste Management Facility (HWMF), also known as the H-Area Seepage Basins, at the Savannah Site (SRS) is monitored periodically for selected hazardous and radioactive constituents. This report presents the results of the required groundwater monitoring program.

  6. Scaling up Primary Health Services in Rural Tamil Nadu: Public Investment Requirements and Health Sector Reform

    E-Print Network [OSTI]

    Scaling up Primary Health Services in Rural Tamil Nadu: Public Investment Requirements and Health two key questions in this paper: 1) In terms of state-wide scaling up of rural services in the area of primary health, what will it cost financially and in terms of human resources to scale-up these services

  7. Scaling up Primary Education Services in Rural Tamil Nadu: Public Investment Requirements and Reform

    E-Print Network [OSTI]

    1 Scaling up Primary Education Services in Rural Tamil Nadu: Public Investment Requirements questions in this paper: 1) In terms of state-wide scaling up of rural services in the area of primary education, what will it cost financially and in terms of human resources to scale-up these services in all

  8. Puget Sound Area Electric Reliability Plan : Draft Environmental Impact State.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    1991-09-01T23:59:59.000Z

    The Puget Sound Area Electric Reliability Plan Draft Environmental Impact Statement (DEIS) identifies the alternatives for solving a power system problem in the Puget Sound area. This Plan is undertaken by Bonneville Power Administration (BPA), Puget Sound Power Light, Seattle City Light, Snohomish Public Utility District No. 1 (PUD), and Tacoma Public Utilities. The Plan consists of potential actions in Puget Sound and other areas in the State of Washington. A specific need exists in the Puget Sound area for balance between east-west transmission capacity and the increasing demand to import power generated east of the Cascades. At certain times of the year, there is more demand for power than the electric system can supply in the Puget Sound area. This high demand, called peak demand, occurs during the winter months when unusually cold weather increases electricity use for heating. The existing power system can supply enough power if no emergencies occur. However, during emergencies, the system will not operate properly. As demand grows, the system becomes more strained. To meet demand, the rate of growth of demand must be reduced or the ability to serve the demand must be increased, or both. The plan to balance Puget Sound's power demand and supply has these purposes: The plan should define a set of actions that would accommodate ten years of load growth (1994--2003). Federal and State environmental quality requirements should be met. The plan should be consistent with the plans of the Northwest Power Planning Council. The plan should serve as a consensus guideline for coordinated utility action. The plan should be flexible to accommodate uncertainties and differing utility needs. The plan should balance environmental impacts and economic costs. The plan should provide electric system reliability consistent with customer expectations. 29 figs., 24 tabs.

  9. Puget Sound area electric reliability plan. Draft environmental impact statement

    SciTech Connect (OSTI)

    Not Available

    1991-09-01T23:59:59.000Z

    The Puget Sound Area Electric Reliability Plan Draft Environmental Impact Statement (DEIS) identifies the alternatives for solving a power system problem in the Puget Sound area. This Plan is undertaken by Bonneville Power Administration (BPA), Puget Sound Power & Light, Seattle City Light, Snohomish Public Utility District No. 1 (PUD), and Tacoma Public Utilities. The Plan consists of potential actions in Puget Sound and other areas in the State of Washington. A specific need exists in the Puget Sound area for balance between east-west transmission capacity and the increasing demand to import power generated east of the Cascades. At certain times of the year, there is more demand for power than the electric system can supply in the Puget Sound area. This high demand, called peak demand, occurs during the winter months when unusually cold weather increases electricity use for heating. The existing power system can supply enough power if no emergencies occur. However, during emergencies, the system will not operate properly. As demand grows, the system becomes more strained. To meet demand, the rate of growth of demand must be reduced or the ability to serve the demand must be increased, or both. The plan to balance Puget Sound`s power demand and supply has these purposes: The plan should define a set of actions that would accommodate ten years of load growth (1994--2003). Federal and State environmental quality requirements should be met. The plan should be consistent with the plans of the Northwest Power Planning Council. The plan should serve as a consensus guideline for coordinated utility action. The plan should be flexible to accommodate uncertainties and differing utility needs. The plan should balance environmental impacts and economic costs. The plan should provide electric system reliability consistent with customer expectations. 29 figs., 24 tabs.

  10. Development of Autonomous Magnetometer Rotorcraft For Wide Area Assessment

    SciTech Connect (OSTI)

    Mark D. McKay; Matthew O. Anderson

    2011-08-01T23:59:59.000Z

    Large areas across the United States and internationally are potentially contaminated with unexploded ordinance (UXO), with some ranges encompassing tens to hundreds of thousands of acres. Technologies are needed which will allow for cost effective wide area scanning with (1) near 100% coverage and (2) near 100% detection of subsurface ordnance or features indicative of subsurface ordnance. The current approach to wide area assessment is a multi-level one, in which medium - altitude fixed wing optical imaging is used for an initial site assessment. This assessment is followed with low altitude manned helicopter based magnetometry. Subsequent to this wide area assessment targeted surface investigations are performed using either towed geophysical sensor arrays or man portable sensors. In order to be an effective tool for small UXO detection, the sensing altitude for magnetic site investigations needs to be on the order of 1 to 3 meters. These altitude requirements mean that manned helicopter surveys will generally only be feasible in large, open and relatively flat terrains. While such surveys are effective in mapping large areas relatively fast there are substantial mobilization/demobilization, staffing and equipment costs associated with these surveys, resulting in costs of approximately $100-$150/acre. In addition, due to the low altitude there are substantial risks to pilots and equipment. Surface towed arrays provide highresolution maps but have other limitations, e.g. in their ability to navigate rough terrain effectively. Thus there is a need for other systems, which can be used for effective data collection. An Unmanned Aerial Vehicle (UAV) magnetometer platform is an obvious alternative. The motivation behind such a system is that it reduces risk to operators, is lower in initial and Operational and Maintenance (O&M) costs (and can thus potentially be applied to smaller sites) and has the potential of being more effective in terms of detection and possibly characterization (through the use of dynamic acquisition, i.e. survey mission in-flight reprioritization).

  11. Redevelopment of Areas Needing Redevelopment Generally (Indiana)

    Broader source: Energy.gov [DOE]

    Redevelopment commissions are responsible for developing plans and managing tools used to address conditions of blight (redevelopment areas) and underutilized land of economic significance ...

  12. Research Areas | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    radiation-dominated HED dynamo, and radiation-dominated reconnection. Nonlinear Optics of Plasmas and Laser-Plasma Interactions Specific areas of interest include, but are...

  13. area: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    populations. It is part of a network of AHEC organiza- tions Collins, Gary S. 25 tight environment high radiation area Physics Websites Summary: , no active electronics ...

  14. areas: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    populations. It is part of a network of AHEC organiza- tions Collins, Gary S. 25 tight environment high radiation area Physics Websites Summary: , no active electronics ...

  15. The Ohio Community Reinvestment Area (Ohio)

    Broader source: Energy.gov [DOE]

    The Ohio Community Reinvestment Area program is an economic development tool administered by municipal and county government that provides real property tax exemptions for property owners who...

  16. DFAS Wide-Area Workflow Issues

    Broader source: Energy.gov [DOE]

    Presentation covers the DFAS wide-area workflow issues and is given at the Spring 2011 Federal Utility Partnership Working Group (FUPWG) meeting.

  17. Geothermal Literature Review At International Geothermal Area...

    Open Energy Info (EERE)

    Taupo, North Island, re: Heat Flow References G. Ranalli, L. Rybach (2005) Heat Flow, Heat Transfer And Lithosphere Rheology In Geothermal Areas- Features And Examples...

  18. Management of Specific Flood Plain Areas (Iowa)

    Broader source: Energy.gov [DOE]

    Floodplain management orders by the Iowa Department of Natural Resources as well as approved local ordinances designate an area as a regulated floodplain. These regulations establish minimum...

  19. White Etch Areas: Metallurgical Characterization and Atomistic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Atomistic Modeling Presented by R. Scott Hyde of Timken Company at the 2014 Wind Turbine Tribology Seminar Timken Hyde White Etch Areas ANL Presentation Oct 2014...

  20. Plutonium Equivalent Inventory for Belowground Radioactive Waste at the Los Alamos National Laboratory Technical Area 54, Area G Disposal Facility - Fiscal Year 2011

    SciTech Connect (OSTI)

    French, Sean B. [Los Alamos National Laboratory; Shuman, Rob [WPS: WASTE PROJECTS AND SERVICES

    2012-04-18T23:59:59.000Z

    The Los Alamos National Laboratory (LANL) generates radioactive waste as a result of various activities. Many aspects of the management of this waste are conducted at Technical Area 54 (TA-54); Area G plays a key role in these management activities as the Laboratory's only disposal facility for low-level radioactive waste (LLW). Furthermore, Area G serves as a staging area for transuranic (TRU) waste that will be shipped to the Waste Isolation Pilot Plant for disposal. A portion of this TRU waste is retrievably stored in pits, trenches, and shafts. The radioactive waste disposed of or stored at Area G poses potential short- and long-term risks to workers at the disposal facility and to members of the public. These risks are directly proportional to the radionuclide inventories in the waste. The Area G performance assessment and composite analysis (LANL, 2008a) project long-term risks to members of the public; short-term risks to workers and members of the public, such as those posed by accidents, are addressed by the Area G Documented Safety Analysis (LANL, 2011a). The Documented Safety Analysis uses an inventory expressed in terms of plutonium-equivalent curies, referred to as the PE-Ci inventory, to estimate these risks. The Technical Safety Requirements for Technical Area 54, Area G (LANL, 2011b) establishes a belowground radioactive material limit that ensures the cumulative projected inventory authorized for the Area G site is not exceeded. The total belowground radioactive waste inventory limit established for Area G is 110,000 PE-Ci. The PE-Ci inventory is updated annually; this report presents the inventory prepared for 2011. The approach used to estimate the inventory is described in Section 2. The results of the analysis are presented in Section 3.

  1. EPA`s proposed renewable oxygenate requirement (ROR): Pros and cons

    SciTech Connect (OSTI)

    Czeskleba, H.M. [Ashland Petroleum Co., KY (United States)

    1995-12-31T23:59:59.000Z

    In December 1993, the US Environmental Protection Agency (EPA) released its final rule that sets for the details for requirements to sell reformulated gasoline (RFG) in certain ozone non-attainment areas. At the same time, EPA also issued a proposed rule to require that 30% of the oxygen required in RFG be based on a renewable oxygenate. Renewables include ethanol and its ether derivatives such as ethyl tertiary butyl ether (ETBE). The RFG rule is a final rule, while the Renewable Oxygenate Requirement (ROR) rule is a proposed rule yet to be finalized and subject to revision. Included in this paper are brief reviews of Ashland petroleum Company`s ethanol usage, oxygenated fuel and reformulated gasoline blending economics, and some comments on the EPA proposed renewable oxygenate requirement.

  2. HTGR Industrial Application Functional and Operational Requirements

    SciTech Connect (OSTI)

    L. E. Demick

    2010-08-01T23:59:59.000Z

    This document specifies the functional and performance requirements to be used in the development of the conceptual design of a high temperature gas-cooled reactor (HTGR) based plant supplying energy to a typical industrial facility. These requirements were developed from collaboration with industry and HTGR suppliers over the preceding three years to identify the energy needs of industrial processes for which the HTGR technology is technically and economically viable. The functional and performance requirements specified herein are an effective representation of the industrial sector energy needs and an effective basis for developing a conceptual design of the plant that will serve the broadest range of industrial applications.

  3. Audit of staffing requirements for the Strategic Petroleum Reserve

    SciTech Connect (OSTI)

    NONE

    1995-03-29T23:59:59.000Z

    The Department of Energy`s (Department) Strategic Petroleum Reserve (Reserve) is responsible for storing large quantities of crude oil, currently about 592 million barrels, to reduce the impact of any future supply disruptions. The Reserve facilities consist of a marine terminal and five underground storage sites located in Louisiana and Texas, and program and administrative offices in New Orleans and Washington, DC. At May 31, 1994, 1,692 Departmental and contractor personnel were employed in the operation, maintenance, and administration of Reserve activities and the Fiscal Year 1994 Congressional Appropriation was about $207 million. The audit was requested by the Deputy Secretary of Energy to assist Departmental management in evaluating the human resources required to meet Reserve program requirements. Specifically, the objective of the audit was to determine whether current staffing levels for the Reserve were necessary to effectively and efficiently accomplish current and future anticipated mission requirements. The Secretary`s goal of having the Department and its contractors embrace the best management practices in other Government agencies and industry to improve processes and eliminate waste has not been fully realized by Reserve management. We identified industry performance levels and staffing practices that, if achieved by the Reserve, could enable the Reserve to eliminate approximately 329 positions in eight functional areas with potential annual savings of about $16 million. Our analysis indicated that additional staffing reductions are possible over the long term through further application of industry practices and decreases in the number of managers. However, such staffing reductions will require further analysis by management to determine the specific number of staffing reductions that are attainable. The actual staffing reductions realized by the Reserve will be heavily influenced by several factors.

  4. Sediment Properties: E-Area Completion Project

    SciTech Connect (OSTI)

    Millings, M.; Bagwell, L.; Amidon, M.; Dixon, K.

    2011-04-29T23:59:59.000Z

    To accommodate a future need for additional waste disposal facilities at the Savannah River Site, the Solid Waste Management Division (SWMD) designated nine additional plots for development (Kasraii 2007; SRS 2010); these plots are collectively known as the E Area Completion Project (ECP). Subsurface samples were collected from ECP plots 6, 7, 8 and 9 (Figure 1) for chemical and physical property analyses to support Performance Assessment (PA) and Special Analyses (SA) modeling. This document summarizes the sampling and analysis scheme and the resultant data, and provides interpretations of the data particularly in reference to existing soil property data. Analytical data in this document include: gamma log, cone penetrometer log, grain size (sieve and hydrometer), water retention, saturated hydraulic conductivity (falling head permeameter), porosity, dry bulk density, total organic carbon, x-ray diffraction, and x-ray fluorescence data. SRNL provided technical and safety oversight for the fieldwork, which included completion of eight soil borings, four geophysical logs, and the collection of 522 feet of core and 33 Shelby tubes from ECP plots 6, 7, 8, and 9. Boart Longyear provided sonic drilling and logging services. Two soil borings were completed at each location. The first set of boreholes extended into (but did not fully penetrate) the Warley Hill Formation. These boreholes were continuously cored, then geophysically (gamma ray) logged. The recovered core was split, photographed, and described; one half of the core was archived at SRS's Core Lab facilities, and the remaining half was consumed as necessary for testing at SRS and off-site labs. Core descriptions and geophysical data were used to calculate target elevations for Shelby tube samples, which were obtained from the second set of boreholes. Shelby tubes were shipped to MACTEC Engineering and Consulting Inc. (MACTEC) in Atlanta for physical property testing. SRNL deployed their Site Characterization and Analysis Penetrometer System (SCAPS) cone penetrometer test (CPT) truck at ECP plots 6, 7, 8 and 9 to collect inferred lithology data for the vadose zone. Results from this study are used to make recommendations for future modeling efforts involving the ECP plots. The conceptual model of the ECP hydrogeology differs from the conceptual model of the current ELLWF disposal area in that for the ECP plots, the topography (ground surface) is generally lower in elevation; The Upland and top of Tobacco Road lithostratigraphic units are missing (eroded); The water table occurs lower in elevation (i.e., it occurs in lower stratigraphic units); and the Tan Clay Confining Zone (TCCZ) often occurs within the vadose zone (rather than in the saturated zone). Due to the difference in the hydrogeology between the current ELLWF location and the ECP plots, different vadose zone properties are recommended for the ECP plots versus the properties recommended by Phifer et al. (2006) for the current disposal units. Results from this study do not invalidate or conflict with the current PA's use of the Upper and Lower Vadose Zone properties as described by Phifer et al. (2006) for the current ELLWF disposal units. The following modeling recommendations are made for future modeling of the ECP plots where vadose zone properties are required: (1) If a single vadose zone property is preferred, the properties described by Phifer et al. (2006) for the Upper Vadose Zone encompass the general physical properties of the combined sands and clays in the ECP vadose zone sediments despite the differences in hydrostratigraphic units. (2) If a dual zone system is preferred, a combination of the Lower Zone properties and the Clay properties described by Phifer et al. (2006) are appropriate for modeling the physical properties of the ECP vadose zone. The Clay properties would be assigned to the Tan Clay Confining Zone (TCCZ) and any other significant clay layers, while the Lower Zone properties would be assigned for the remainder of the vadose zone. No immediate updates or changes are recommended for

  5. Small Area Array-Based LED Luminaire Design

    SciTech Connect (OSTI)

    Thomas Yuan

    2008-01-09T23:59:59.000Z

    This report contains a summary of technical achievements during a three-year project to demonstrate high efficiency LED luminaire designs based on small area array-based gallium nitride diodes. Novel GaN-based LED array designs are described, specifically addressing the thermal, optical, electrical and mechanical requirements for the incorporation of such arrays into viable solid-state LED luminaires. This work resulted in the demonstration of an integrated luminaire prototype of 1000 lumens cool white light output with reflector shaped beams and efficacy of 89.4 lm/W at CCT of 6000oK and CRI of 73; and performance of 903 lumens warm white light output with reflector shaped beams and efficacy of 63.0 lm/W at CCT of 2800oK and CRI of 82. In addition, up to 1275 lumens cool white light output at 114.2 lm/W and 1156 lumens warm white light output at 76.5 lm/W were achieved if the reflector was not used. The success to integrate small area array-based LED designs and address thermal, optical, electrical and mechanical requirements was clearly achieved in these luminaire prototypes with outstanding performance and high efficiency.

  6. Remote Area Power Supply (RAPS) load and resource profiles.

    SciTech Connect (OSTI)

    Giles, Lauren (Energetics, Inc., Washington, DC); Skolnik, Edward G. (Energetics, Inc., Washington, DC); Marchionini, Brian (Energetics, Inc., Washington, DC); Fall, Ndeye K. (Energetics, Inc., Washington, DC)

    2007-07-01T23:59:59.000Z

    In 1997, an international team interested in the development of Remote Area Power Supply (RAPS) systems for rural electrification projects around the world was organized by the International Lead Zinc Research Organization (ILZRO) with the support of Sandia National Laboratories (SNL). The team focused on defining load and resource profiles for RAPS systems. They identified single family homes, small communities, and villages as candidates for RAPS applications, and defined several different size/power requirements for each. Based on renewable energy and resource data, the team devised a ''strawman'' series of load profiles. A RAPS system typically consists of a renewable and/or conventional generator, power conversion equipment, and a battery. The purpose of this report is to present data and information on insolation levels and load requirements for ''typical'' homes, small communities, and larger villages around the world in order to facilitate the development of robust design practices for RAPS systems, and especially for the storage battery component. These systems could have significant impact on areas of the world that would otherwise not be served by conventional electrical grids.

  7. Preliminary Safety Analysis Report for the Transuranic Storage Area Retrieval Enclosure at the Idaho National Engineering Laboratory. Revision 8

    SciTech Connect (OSTI)

    Not Available

    1993-03-01T23:59:59.000Z

    This Transuranic Storage Area Retrieval Enclosure Preliminary Safety Analysis Report was completed as required by DOE Order 5480.23. The purpose of this document is to construct a safety basis that supports the design and permits construction of the facility. The facility has been designed to the requirements of a Radioactive Solid Waste Facility presented in DOE Order 6430.1A.

  8. Abstract--The integration of variable renewable generation sources continues to be a significant area of focus for power

    E-Print Network [OSTI]

    by this variability, wind generation often requires additional balancing resources to compensate for the variability of additional wind generation into the Northwest Power Pool. It quantifies the number of vehicles required area of focus for power system planning. Renewable portfolio standards and initiatives to reduce

  9. Women Leaders in Medicine: Institutional Transformation Required

    E-Print Network [OSTI]

    Sheridan, Jennifer

    Women Leaders in Medicine: Institutional Transformation Required Molly Carnes, MD, MS Professor, Depts Medicine, Psychiatry, and Industrial & Systems Engineering University of Wisconsin Director, Women's progress toward leadership #12;Sexist discrimination still exists ­ it is just less blatant than

  10. SEMI-ANNUAL REPORTING REQUIREMENTS (LNG EXPORTERS)

    Broader source: Energy.gov [DOE]

    Companies with authorizations to export LNG are required to file, on a semi-annual basis, written reports describing the progress of the planned liquefaction facility project that is part of the...

  11. Requirements & Status for Volume Fuel Cell Manufacturing

    E-Print Network [OSTI]

    Sampling to SPC ­Measurement System Variability: Six Sigma capability Automotive Customer ­APQP ­Certificate of Compliance ­Capable and Controlled Processes ­Process and Designs Verified and Validated to meet Automotive Application Requirements ­PPAP (part Submission Warrant

  12. DOE Challenge Home, California Program Requirements

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    not required. b. Location, based on zip code, has at least 5 kWhm 2 day average daily solar radiation based on annual solar insolation using this online tool: http:...

  13. Metals Production Requirements for Rapid Photovoltaics Deployment

    E-Print Network [OSTI]

    Kavlak, Goksin; Jaffe, Robert L; Trancik, Jessika E

    2015-01-01T23:59:59.000Z

    If global photovoltaics (PV) deployment grows rapidly, the required input materials need to be supplied at an increasing rate. In this paper, we quantify the effect of PV deployment levels on the scale of metals production. For example, we find that if cadmium telluride {copper indium gallium diselenide} PV accounts for more than 3% {10%} of electricity generation by 2030, the required growth rates for the production of indium and tellurium would exceed historically-observed production growth rates for a large set of metals. In contrast, even if crystalline silicon PV supplies all electricity in 2030, the required silicon production growth rate would fall within the historical range. More generally, this paper highlights possible constraints to the rate of scaling up metals production for some PV technologies, and outlines an approach to assessing projected metals growth requirements against an ensemble of past growth rates from across the metals production sector. The framework developed in this paper may be...

  14. Smart Grid Information Security (IS) Functional Requirement

    E-Print Network [OSTI]

    Ling, Amy Poh Ai

    2011-01-01T23:59:59.000Z

    It is important to implement safe smart grid environment to enhance people's lives and livelihoods. This paper provides information on smart grid IS functional requirement by illustrating some discussion points to the sixteen identified requirements. This paper introduces the smart grid potential hazards that can be referred as a triggering factor to improve the system and security of the entire grid. The background of smart information infrastructure and the needs for smart grid IS is described with the adoption of hermeneutic circle as methodology. Grid information technology and security-s session discusses that grid provides the chance of a simple and transparent access to different information sources. In addition, the transformation between traditional versus smart grid networking trend and the IS importance on the communication field reflects the criticality of grid IS functional requirement identification is introduces. The smart grid IS functional requirements described in this paper are general and ...

  15. ICE Pulse Oximeter Smart Alarm App Requirements

    E-Print Network [OSTI]

    Huth, Michael

    ICE Pulse Oximeter Smart Alarm App Requirements 6 March 2012 Revision 0 for an Integrated Clinical Environment (ICE) pulse oximetry monitoring app that provides.2 References [Purpose: List all ICE standards, and other standards and references

  16. San Bernardino County- Green Building Requirement

    Broader source: Energy.gov [DOE]

    In August 2007, the San Bernardino County Board of Supervisors approved a policy requiring that all new county buildings and major renovations be built to LEED Silver standards. The decision was...

  17. NERSC/DOE FES Requirements Workshop Participants

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mandrekas, Bill Tang, Doug McCune) Large Scale Computing and Storage Requirements for Fusion Energy Sciences An ASCR FES NERSC Workshop August 3-4, 2010 Name Organization...

  18. Cold vacuum drying facility design requirements

    SciTech Connect (OSTI)

    Irwin, J.J.

    1997-09-24T23:59:59.000Z

    This release of the Design Requirements Document is a complete restructuring and rewrite to the document previously prepared and released for project W-441 to record the design basis for the design of the Cold Vacuum Drying Facility.

  19. Technical requirements specification for tank waste retrieval

    SciTech Connect (OSTI)

    Lamberd, D.L.

    1996-09-26T23:59:59.000Z

    This document provides the technical requirements specification for the retrieval of waste from the underground storage tanks at the Hanford Site. All activities covered by this scope are conducted in support of the Tank Waste Remediation System (TWRS) mission.

  20. Harris County- LEED Requirement for County Buildings

    Broader source: Energy.gov [DOE]

    In 2009, the Harris County Commissioners Court approved a measure that requires all new county buildings to meet minimum LEED certification standards. Buildings do not have to register with the the...

  1. Tucson- Solar Design Requirement for Homes

    Broader source: Energy.gov [DOE]

    Tucson adopted an ordinance in June 2008 that requires all new single-family homes and duplexes in Tucson to be "solar-ready." The ordinance was developed by a stakeholder group which included...

  2. Development Requirements for Advanced Industrial Heat Pumps 

    E-Print Network [OSTI]

    Chappell, R. N.; Priebe, S. J.; Bliem, C. J.; Mills, J. I.

    1985-01-01T23:59:59.000Z

    DOE is attempting to advance the use of heat pumps to save energy in industrial processes. The approach has emphasized developing better heat pump technology and transferring that technology to the private sector. DOE requires that heat pump...

  3. Extracting Security Control Requirements University of Tulsa

    E-Print Network [OSTI]

    Gamble, R. F.

    , Requirements, Security Policy Modeling. 1. INTRODUCTION Networks and information systems have grown. Security has become a larger issue with the democratization of technology and information. Security accepted security controls for "Federal Information Systems and Organizations" [8]. NIST defines security

  4. Gas Test Loop Functional and Technical Requirements

    SciTech Connect (OSTI)

    Glen R. Longhurst; Soli T. Khericha; James L. Jones

    2004-09-01T23:59:59.000Z

    This document defines the technical and functional requirements for a gas test loop (GTL) to be constructed for the purpose of providing a high intensity fast-flux irradiation environment for developers of advanced concept nuclear reactors. This capability is needed to meet fuels and materials testing requirements of the designers of Generation IV (GEN IV) reactors and other programs within the purview of the Advanced Fuel Cycle Initiative (AFCI). Space nuclear power development programs may also benefit by the services the GTL will offer. The overall GTL technical objective is to provide developers with the means for investigating and qualifying fuels and materials needed for advanced reactor concepts. The testing environment includes a fast-flux neutron spectrum of sufficient intensity to perform accelerated irradiation testing. Appropriate irradiation temperature, gaseous environment, test volume, diagnostics, and access and handling features are also needed. This document serves to identify those requirements as well as generic requirements applicable to any system of this kind.

  5. Microsoft Word - Net Requirements Transparency Process_09302014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 As part of its Net Requirements Transparency process, on July 31, 2014 BPA published the SliceBlock and Block customers' FY2013 and forecast FY2015 Total Retail Load (TRL) and...

  6. Guam- Solar-Ready Residential Building Requirement

    Broader source: Energy.gov [DOE]

    The Guam Energy Code, which became effective in October of 2000, requires that piping stub outs be provided for water heaters installed in low-rise residential buildings to enable the future inst...

  7. Development Requirements for Advanced Industrial Heat Pumps

    E-Print Network [OSTI]

    Chappell, R. N.; Priebe, S. J.; Bliem, C. J.; Mills, J. I.

    DOE is attempting to advance the use of heat pumps to save energy in industrial processes. The approach has emphasized developing better heat pump technology and transferring that technology to the private sector. DOE requires that heat pump...

  8. Energy Efficiency and Conservation Requirements for Utilities

    Broader source: Energy.gov [DOE]

    In October 2008 Pennsylvania adopted Act 129, creating energy efficiency and conservation requirements for the state’s investor owned utilities with at least 100,000 customers. With this limitation...

  9. The Access Almanac: Solar Parking Requirements

    E-Print Network [OSTI]

    Shoup, Donald

    2012-01-01T23:59:59.000Z

    for many commuters’ electric cars. California requires that,well suited to charging electric cars. If the solar energydrivers who don’t own electric cars can feel green when they

  10. Cook County- LEED Requirements for County Buildings

    Broader source: Energy.gov [DOE]

    In 2002, Cook County enacted an ordinance requiring all new county buildings and all retrofitted county buildings to be built to LEED standards. Specifically, all newly constructed buildings and...

  11. ALS Beamline Design Requirements - Revision 1

    E-Print Network [OSTI]

    Heimann, Phil

    2010-01-01T23:59:59.000Z

    6. Equipment protection system (EPS) qualification, specificcompleted. Equipment Protection System (EPS) Qualification:Qualification: The beamline has been checked for compliance with all relevant mechanical requirements for personnel safety and equipment

  12. Functional requirements to shape generation in CAD

    E-Print Network [OSTI]

    Chung, Jinpyung, 1967-

    2003-01-01T23:59:59.000Z

    An outstanding issue in computer-aided design (CAD) is the creation of geometric shapes from the description of functional requirements (FRs). This thesis presents a method that can generate assembled shapes from the given ...

  13. Computer Requirement ALL STUDENTS IN THE SCHOOL OF ARCHITECTURE ARE REQUIRED TO PROVIDE THEIR OWN

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    Computer Requirement ALL STUDENTS IN THE SCHOOL OF ARCHITECTURE ARE REQUIRED TO PROVIDE THEIR OWN PERSONAL LAPTOP COMPUTER. · All ENTERING GRADUATE STUDENTS in the School of Architecture are required to bring a computer. · All SECOND-YEAR UNDERGRADUATE STUDENTS accepted into the School of Architecture

  14. Landscape & Lawn Management Internship Requirements 12-4-09 LANDSCAPE AND LAWN MANAGEMENT INTERNSHIP OVERVIEW & REQUIREMENTS

    E-Print Network [OSTI]

    Landscape & Lawn Management Internship Requirements 12-4-09 LANDSCAPE AND LAWN MANAGEMENT INTERNSHIP OVERVIEW & REQUIREMENTS It is the student's responsibility to set-up their internship their internships in April and work through mid-August. You're required to seek new or expanded work opportunities

  15. Landscape & Lawn Management Internship Requirements 10-14-09 LANDSCAPE AND LAWN MANAGEMENT INTERNSHIP OVERVIEW & REQUIREMENTS

    E-Print Network [OSTI]

    Landscape & Lawn Management Internship Requirements 10-14-09 LANDSCAPE AND LAWN MANAGEMENT INTERNSHIP OVERVIEW & REQUIREMENTS It is the student's responsibility to set-up their internship their internships in April and work through mid-August. You're required to seek new or expanded work opportunities

  16. YOU MUST COMLPETE ALL REQUIRED AREAS FOR THE FORM TO BE SUCCESSFULLY SUBMITTED BY EMAIL. SUBMITTING BY EMAIL IS PREFERRED.

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    : COMPLETE ONLY THE SECTION THAT APPLIES TO YOUR SITUATION VEHICLE PERSONAL INJURY PROPERTY DAMAGE CYBER/DATA SECURITY/OTHER INCIDENT VEHICLE LOSS ACCIDENT INFORMATION Were Police Notified? Yes No Name of Police No STATE Vehicle Driver: OTHER Vehicle Driver: Weather Conditions: Clear Rain Snow Other ... Describe

  17. Postdoctoral Scholar position Area: Mathematics Education

    E-Print Network [OSTI]

    de Leon, Alex R.

    with the City of Calgary's vibrant energy and diversity. The university is home to scholars in 14 facultiesPostdoctoral Scholar position Area: Mathematics Education Duration: 18 months Start date: January 1, invites applications for a Postdoctoral Fellowship in the area of mathematics education. This competition

  18. ARRA Proposed Award: Retrofit Bay Area

    E-Print Network [OSTI]

    ARRA Proposed Award: Retrofit Bay Area Counties of Alameda, Contra Costa, Marin, San Francisco per year Prime contractor: Association of Bay Area Governments (ABAG) Sub contractors: Alameda County Waste Management Authority (StopWaste.org) County of Contra Costa County of Marin City

  19. BUILDING 96 RECOMMENDATION FOR SOURCE AREA REMEDIATION

    E-Print Network [OSTI]

    OU III BUILDING 96 RECOMMENDATION FOR SOURCE AREA REMEDIATION FINAL Prepared by: Brookhaven FOR U.S. Department of Energy March 2009 #12;i OU III BUILDING 96 RECOMMENDATION FOR SOURCE AREA..................................................................................................................4 4.0 Building 96 ­ Operational Background

  20. Radiation Protection Surveys in Clinical Areas

    E-Print Network [OSTI]

    Jia, Songtao

    Radiation Protection Surveys in Clinical Areas Procedure: 7.521 Created: 4/23/2014 Version: 1 as low as reasonably achievable (ALARA) it is necessary to perform routine radiation protection surveys minute (DPM) or below. Results should be recorded in DPM. a. Survey Areas #12;Radiation Protection

  1. Industrial & Systems Engineering Areas of Engineering Interests

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Industrial & Systems Engineering Areas of Engineering Interests The Department of Industrial and Systems Engineering understands our students may work as Industrial Engineers in other engineering industries, and to help prepare them for these careers, the ISE Areas of Interest was formulated. The courses

  2. Pine Ridge Area Community Wildfire Protection Plan

    E-Print Network [OSTI]

    Farritor, Shane

    Pine Ridge Area Community Wildfire Protection Plan Update 2013 West Ash Fire: Wednesday August 29 the boundary of the original plan to include all the area within the Upper Niobrara White Natural Resource, 2012 #12;Facilitated by: Nebraska Forest Service In cooperation with: Region 23 Fire Protection

  3. Hamiltonian gadgets with reduced resource requirements

    E-Print Network [OSTI]

    Yudong Cao; Ryan Babbush; Jacob Biamonte; Sabre Kais

    2015-01-20T23:59:59.000Z

    Application of the adiabatic model of quantum computation requires efficient encoding of the solution to computational problems into the lowest eigenstate of a Hamiltonian that supports universal adiabatic quantum computation. Experimental systems are typically limited to restricted forms of 2-body interactions. Therefore, universal adiabatic quantum computation requires a method for approximating quantum many-body Hamiltonians up to arbitrary spectral error using at most 2-body interactions. Hamiltonian gadgets, introduced around a decade ago, offer the only current means to address this requirement. Although the applications of Hamiltonian gadgets have steadily grown since their introduction, little progress has been made in overcoming the limitations of the gadgets themselves. In this experimentally motivated theoretical study, we introduce several gadgets which require significantly more realistic control parameters than similar gadgets in the literature. We employ analytical techniques which result in a reduction of the resource scaling as a function of spectral error for the commonly used subdivision, 3- to 2-body and $k$-body gadgets. Accordingly, our improvements reduce the resource requirements of all proofs and experimental proposals making use of these common gadgets. Next, we numerically optimize these new gadgets to illustrate the tightness of our analytical bounds. Finally, we introduce a new gadget that simulates a $YY$ interaction term using Hamiltonians containing only $\\{X,Z,XX,ZZ\\}$ terms. Apart from possible implications in a theoretical context, this work could also be useful for a first experimental implementation of these key building blocks by requiring less control precision without introducing extra ancillary qubits.

  4. 2010 Annual Wastewater Reuse Report for the Idaho National Laboratory Site's Central Facilities Area Sewage Treatment Plant

    SciTech Connect (OSTI)

    Mike lewis

    2011-02-01T23:59:59.000Z

    This report describes conditions, as required by the state of Idaho Wastewater Reuse Permit (#LA-000141-03), for the wastewater land application site at Idaho National Laboratory Site’s Central Facilities Area Sewage Treatment Plant from November 1, 2009, through October 31, 2010. The report contains the following information: • Site description • Facility and system description • Permit required monitoring data and loading rates • Status of special compliance conditions • Discussion of the facility’s environmental impacts. During the 2010 permit year, approximately 2.2 million gallons of treated wastewater was land-applied to the irrigation area at Central Facilities Area Sewage Treatment plant.

  5. 2011 Annual Wastewater Reuse Report for the Idaho National Laboratory Site’s Central Facilities Area Sewage Treatment Plant

    SciTech Connect (OSTI)

    Michael G. Lewis

    2012-02-01T23:59:59.000Z

    This report describes conditions, as required by the state of Idaho Wastewater Reuse Permit (LA-000141-03), for the wastewater land application site at Idaho National Laboratory Site's Central Facilities Area Sewage Treatment Plant from November 1, 2010, through October 31, 2011. The report contains the following information: (1) Site description; (2) Facility and system description; (3) Permit required monitoring data and loading rates; (4) Status of special compliance conditions and activities; and (5) Discussion of the facility's environmental impacts. During the 2011 permit year, approximately 1.22 million gallons of treated wastewater was land-applied to the irrigation area at Central Facilities Area Sewage Treatment plant.

  6. 2012 Annual Wastewater Reuse Report for the Idaho National Laboratory Site's Central facilities Area Sewage Treatment Plant

    SciTech Connect (OSTI)

    Mike Lewis

    2013-02-01T23:59:59.000Z

    This report describes conditions, as required by the state of Idaho Wastewater Reuse Permit (#LA-000141-03), for the wastewater land application site at Idaho National Laboratory Site’s Central Facilities Area Sewage Treatment Plant from November 1, 2011, through October 31, 2012. The report contains the following information: • Site description • Facility and system description • Permit required monitoring data and loading rates • Status of compliance conditions and activities • Discussion of the facility’s environmental impacts. During the 2012 permit year, no wastewater was land-applied to the irrigation area of the Central Facilities Area Sewage Treatment Plant.

  7. Experimentally Determined Interfacial Area Between Immiscible Fluids in Porous Media

    SciTech Connect (OSTI)

    Crandall, Dustin; Niessner, J; Hassanizadeh, S.M; Smith, Duane

    2008-01-01T23:59:59.000Z

    When multiple fluids flow through a porous medium, the interaction between the fluid interfaces can be of great importance. While this is widely recognized in practical applications, numerical models often disregard interactios between discrete fluid phases due to the computational complexity. And rightly so, for this level of detail is well beyond most extended Darcy Law relationships. A new model of two-phase flow including the interfacial area has been proposed by Hassarizadeh and Gray based upon thermodynamic principles. A version of this general equation set has been implemented by Nessner and Hassarizadeh. Many of the interfacial parameters required by this equation set have never been determined from experiments. The work presented here is a description of how the interfacial area, capillary pressure, interfacial velocity and interfacial permeability from two-phase flow experiments in porous media experiments can be used to determine the required parameters. This work, while on-going, has shown the possibility of digitizing images within translucent porous media and identifying the location and behavior of interfaces under dynamic conditions. Using the described methods experimentally derived interfacial functions to be used in larger scale simulations are currently being developed. In summary, the following conclusions can be drawn: (1) by mapping a pore-throat geometry onto an image of immiscible fluid flow, the saturation of fluids and the individual interfaces between the fluids can be identified; (2) the resulting saturation profiles of the low velocity drainage flows used in this study are well described by an invasion percolation fractal scaling; (3) the interfacial area between fluids has been observed to increase in a linear fashion during the initial invasion of the non-wetting fluid; and (4) the average capillary pressure within the entire cell and representative elemental volumes were observed to plateau after a small portion of the volume was invaded.

  8. Wide-area situation awareness in electric power grid

    SciTech Connect (OSTI)

    Greitzer, Frank L.

    2010-04-28T23:59:59.000Z

    Two primary elements of the US energy policy are demand management and efficiency and renewable sources. Major objectives are clean energy transmission and integration, reliable energy transmission, and grid cyber security. Development of the Smart Grid seeks to achieve these goals by lowering energy costs for consumers, achieving energy independence and reducing greenhouse gas emissions. The Smart Grid is expected to enable real time wide-area situation awareness (SA) for operators. Requirements for wide-area SA have been identified among interoperability standards proposed by the Federal Energy Regulatory Commission and the National Institute of Standards and Technology to ensure smart-grid functionality. Wide-area SA and enhanced decision support and visualization tools are key elements in the transformation to the Smart Grid. This paper discusses human factors research to promote SA in the electric power grid and the Smart Grid. Topics that will be discussed include the role of human factors in meeting US energy policy goals, the impact and challenges for Smart Grid development, and cyber security challenges.

  9. SEMI-ANNUAL REPORTING REQUIREMENTS (LNG EXPORTERS) | Department...

    Broader source: Energy.gov (indexed) [DOE]

    SEMI-ANNUAL REPORTING REQUIREMENTS (LNG EXPORTERS) SEMI-ANNUAL REPORTING REQUIREMENTS (LNG EXPORTERS) Companies with authorizations to export LNG are required to file, on a...

  10. amplified genomic areas: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to usually as "Solutions") offers 18 focus areas covering a wealth of genetics and genomics areas, Biotechnology Websites Summary: ") offers 18 focus areas covering a wealth of...

  11. Fluid management plan for the Project Shoal Area Offsites Subproject

    SciTech Connect (OSTI)

    NONE

    1996-08-01T23:59:59.000Z

    The US Department of Energy, Nevada Operations Office (DOE/NV) has initiated the Offsites Subproject to characterize the hazards posed to human health and the environment as a result of underground nuclear testing activities at facilities other than the Nevada Test Site (NTS). A primary Subproject objective is to gather adequate data to characterize the various Subproject sites through the collection of surface and subsurface soil samples and by drilling several wells for the collection of groundwater data. The Project Shoal Area (PSA) is one of the Subproject`s Nevada sites and is subject to the requirements set forth in the Federal Facility Compliance Agreement and Consent Order (FFACO) (DOE, 1996a). In accordance with the FFACO, a Corrective Action Investigation Plan (CAIP) has been developed for work at the PSA (designated as Corrective Action Unit Number 416). This Fluid Management Plan (FMP) provides guidance for the management of fluids generated from wells constructed at the PSA. Long-term monitoring and future activities at the site, if required, will be set forth in additional documents as required by the FFACO. The ultimate method for disposition of fluids generated by site operations depends upon sample analysis and process knowledge in relation to fluid management criteria. Section 2 describes well site operations; Section 3 discusses fluid management criteria; Section 4 includes the fluid monitoring program; Section 5 presents the fluid management strategy; Section 6 provides for fluid management during routine well monitoring; and Section 7 contains reporting criteria.

  12. Closure Report for the 92-Acre Area and Corrective Action Unit 111: Area 5 WMD Retired Mixed Waste Pits, Nevada National Security Site, Nevada

    SciTech Connect (OSTI)

    NSTec Environmental Restoration

    2012-02-21T23:59:59.000Z

    This Closure Report (CR) presents information supporting closure of the 92-Acre Area, which includes Corrective Action Unit (CAU) 111, 'Area 5 WMD Retired Mixed Waste Pits.' This CR provides documentation supporting the completed corrective actions and confirmation that the closure objectives were met. This CR complies with the requirements of the Federal Facility Agreement and Consent Order (FFACO) (FFACO, 1996 [as amended March 2010]). Closure activities began in January 2011 and were completed in January 2012. Closure activities were conducted according to Revision 1 of the Corrective Action Decision Document/Corrective Action Plan (CADD/CAP) for the 92-Acre Area and CAU 111 (U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office [NNSA/NSO], 2010). The following closure activities were performed: (1) Construct an engineered evapotranspiration cover over the boreholes, trenches, and pits in the 92-Acre Area; (2) Install use restriction (UR) warning signs, concrete monuments, and subsidence survey monuments; and (3) Establish vegetation on the covers. UR documentation is included as Appendix C of this report. The post-closure plan is presented in detail in Revision 1 of the CADD/CAP for the 92-Acre Area and CAU 111, and the requirements are summarized in Section 5.2 of this document. When the next request for modification of Resource Conservation and Recovery Act Permit NEV HW0101 is submitted to the Nevada Division of Environmental Protection (NDEP), the requirements for post-closure monitoring of the 92-Acre Area will be included. NNSA/NSO requests the following: (1) A Notice of Completion from NDEP to NNSA/NSO for closure of CAU 111; and (2) The transfer of CAU 111 from Appendix III to Appendix IV, Closed Corrective Action Units, of the FFACO.

  13. A novel lithography technique for formation of large areas of uniform nanostructures

    E-Print Network [OSTI]

    Shahriar, Selim

    such as plasmonics, sensors, storage devices, solar cells, nano-filtration and artificial kidneys require applications such as surface plasmonics[1] , data storage[2] , optoelectronic devices[3] , and nanoA novel lithography technique for formation of large areas of uniform nanostructures Wei Wu

  14. PPE Certification of Hazard Assessment Dept: Area: Job Classification/Task

    E-Print Network [OSTI]

    Slatton, Clint

    PPE 7 Appendix A PPE Certification of Hazard Assessment Dept: Area: Job Classification/Task: HAZARDS (Circle Hazards) Describe Specific Hazards Identify Type of PPE Required for the Hazards Eye Hazard Impact Penetration Dust Chemical Radiation Heat Bioaerosols Projectiles Head Hazard Burn Electric

  15. High surface area crystalline titanium dioxide: potential and limits in electrochemical energy storage and catalysis

    E-Print Network [OSTI]

    Pfeifer, Holger

    High surface area crystalline titanium dioxide: potential and limits in electrochemical energy-Planck-Institut für Polymerforschung, Ackermannweg 10, D-55128 Mainz, Germany Abstract Titanium dioxide is one, as support in catalysis etc. Common synthesis methods of titanium dioxide typically require a high

  16. F-Area Hazardous Waste Management Facility Semiannual Correction Action Report, Vol. I and II

    SciTech Connect (OSTI)

    Chase, J.

    1999-11-18T23:59:59.000Z

    The groundwater in the uppermost aquifer beneath the F-Area Hazardous Waste Management Facility (HWMF) at the Savannah River Site is routinely monitored for selected hazardous and radioactive constituents. This report presents the results of the required groundwater monitoring program.

  17. Name ID# Date General Degree Credit Requirements

    E-Print Network [OSTI]

    Barrash, Warren

    field Area III core course in any field 3-5 4 4 MUS 119 Materials of Music I MUS 120 Materials of Music II MUS 121 Ear Training I MUS 122 Ear Training II MUS 219 Materials of Music III MUS 220 Materials 3 MUS-APL 10 Concert Class* MUS-APL 108, 109 Class Piano Senior Recital** OR Senior Project*** *8

  18. REQUIREMENTS Master's in Systems Science (MS SS)

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    to Applied Probability and Statistics SSIE 506, Systems Problem Solving SSIE 520, Modeling and Simulation and ISE. FACULTY AND RESEARCH The SSIE department has secured more than $2.9 million in research funding-year strategy, has identified natural sciences, healthcare systems and smart energy as major areas of interest

  19. World nuclear fuel cycle requirements 1991

    SciTech Connect (OSTI)

    Not Available

    1991-10-10T23:59:59.000Z

    The nuclear fuel cycle consists of mining and milling uranium ore, processing the uranium into a form suitable for generating electricity, burning'' the fuel in nuclear reactors, and managing the resulting spent nuclear fuel. This report presents projections of domestic and foreign requirements for natural uranium and enrichment services as well as projections of discharges of spent nuclear fuel. These fuel cycle requirements are based on the forecasts of future commercial nuclear power capacity and generation published in a recent Energy Information Administration (EIA) report. Also included in this report are projections of the amount of spent fuel discharged at the end of each fuel cycle for each nuclear generating unit in the United States. The International Nuclear Model is used for calculating the projected nuclear fuel cycle requirements. 14 figs., 38 tabs.

  20. Advanced Scientific Computing Research Network Requirements

    SciTech Connect (OSTI)

    Dart, Eli; Tierney, Brian

    2013-03-08T23:59:59.000Z

    The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the U.S. Department of Energy (DOE) Office of Science (SC), the single largest supporter of basic research in the physical sciences in the United States. In support of SC programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 25 years. In October 2012, ESnet and the Office of Advanced Scientific Computing Research (ASCR) of the DOE SC organized a review to characterize the networking requirements of the programs funded by the ASCR program office. The requirements identified at the review are summarized in the Findings section, and are described in more detail in the body of the report.

  1. Nutritional Requirements of the Angora Goat.

    E-Print Network [OSTI]

    Huston, J. E.; Shelton, Maurice; Ellis, W. C.

    1971-01-01T23:59:59.000Z

    COMPOSITION OF DIETS FOR AN- GORA GOATS Classes and weights (Ib.) of goats TDN (yo) DE (Mcalllb.) CP (%) Wezhers and dry does 50 50-60 1.0-1.2 9.0-10.4 60 50-58 1.0-1.2 9.0-10.4 80 50-54 1.0-1.1 9.0- 9.7 100 5 0 1 .0 9.0- 9.5 120 5 0 1 .0 9... in the , requirements table (Table 1) in that energy requirement of a 100-pound doe is less than twice that of a 50-pound :' doe. In contrast, energy requirements above the main- tenance level for prod~~ctive purposes are characteristic of the product and vary...

  2. Technical Safety Requirements for the B695 Segment

    SciTech Connect (OSTI)

    Laycak, D

    2008-09-11T23:59:59.000Z

    This document contains Technical Safety Requirements (TSRs) for the Radioactive and Hazardous Waste Management (RHWM) Division's B695 Segment of the Decontamination and Waste Treatment Facility (DWTF) at Lawrence Livermore National Laboratory (LLNL). The TSRs constitute requirements regarding the safe operation of the B695 Segment. The TSRs are derived from the Documented Safety Analysis (DSA) for the B695 Segment (LLNL 2007). The analysis presented there determined that the B695 Segment is a low-chemical hazard, Hazard Category 3, nonreactor nuclear facility. The TSRs consist primarily of inventory limits as well as controls to preserve the underlying assumptions in the hazard analyses. Furthermore, appropriate commitments to safety programs are presented in the administrative controls section of the TSRs. The B695 Segment (B695 and the west portion of B696) is a waste treatment and storage facility located in the northeast quadrant of the LLNL main site. The approximate area and boundary of the B695 Segment are shown in the B695 Segment DSA. Activities typically conducted in the B695 Segment include container storage, lab-packing, repacking, overpacking, bulking, sampling, waste transfer, and waste treatment. B695 is used to store and treat radioactive, mixed, and hazardous waste, and it also contains equipment used in conjunction with waste processing operations to treat various liquid and solid wastes. The portion of the building called Building 696 Solid Waste Processing Area (SWPA), also referred to as B696S in this report, is used primarily to manage solid radioactive, mixed, and hazardous waste. Operations specific to the SWPA include sorting and segregating waste, lab-packing, sampling, and crushing empty drums that previously contained waste. Furthermore, a Waste Packaging Unit will be permitted to treat hazardous and mixed waste. RHWM generally processes LLW with no, or extremely low, concentrations of transuranics (i.e., much less than 100 nCi/g). Wastes processed often contain only depleted uranium and beta- and gamma-emitting nuclides, e.g., {sup 90}Sr, {sup 137}Cs, {sup 3}H. Chapter 5 of the DSA documents the derivation of TSRs and develops the operational limits that protect the safety envelope defined for this facility. The DSA is applicable to the handling of radioactive waste stored and treated in the B695 Segment. Section 5 of the TSR, Administrative Controls, contains those Administrative Controls necessary to ensure safe operation of the B695 Segment. A basis explanation for each of the requirements described in Section 5.5, Specific Administrative Controls is provided in Appendix B. The basis explanation does not constitute an additional requirement, but is intended as an expansion of the logic and reasoning behind development of the requirement. Programmatic Administrative Controls are addressed in Section 5.6. This introduction to the B695 Segment TSRs is not part of the TSR limits or conditions and contains no requirements related to B695 Segment operations or to the safety analyses in the DSA.

  3. Ootw Tool Requirements in Relation to JWARS

    SciTech Connect (OSTI)

    Hartley III, D.S.; Packard, S.L.

    1998-01-01T23:59:59.000Z

    This document reports the results of the CMke of the Secretary of Defense/Program Analysis & Evaluation (OSD/PA&E) sponsored project to identify how Operations Other Than War (OOTW) tool requirements relate to the Joint Warfare Simulation (JWARS) and, more generally, to joint analytical modeling and simulation (M&S) requirements. It includes recommendations about which OOTW tools (and functionality within tools) should be included in JWARS, which should be managed as joint analytical modeling and simulation (M&S) tools, and which should be left for independent development.

  4. Nuclear Power and the World's Energy Requirements

    E-Print Network [OSTI]

    V. Castellano; R. F. Evans; J. Dunning-Davies

    2004-06-10T23:59:59.000Z

    The global requirements for energy are increasing rapidly as the global population increases and the under-developed nations become more advanced. The traditional fuels used in their traditional ways will become increasingly unable to meet the demand. The need for a review of the energy sources available is paramount, although the subsequent need to develop a realistic strategy to deal with all local and global energy requirements is almost as important. Here attention will be restricted to examining some of the claims and problems of using nuclear power to attempt to solve this major question.

  5. Controlling Tree Squirrels in Urban Areas

    E-Print Network [OSTI]

    Texas Wildlife Services

    2006-09-06T23:59:59.000Z

    In urban areas, tree squirrels can become pests when they eat pecans, berries, bird seed or vegetables from home gardens, or when they nest in attics. This leaflet discusses control of squirrels by fencing, trapping, poisoning and shooting....

  6. Redefining Housing Market Areas in Scotland 

    E-Print Network [OSTI]

    Muir, Christopher Iain

    2009-01-01T23:59:59.000Z

    This research aims to address some of the limitations inherent in the methods currently used for identification of Housing Market Areas (HMAs) in Scotland. Firstly the conventionally defined geography of HMAs for the four ...

  7. Coal seam natural gas producing areas (Louisiana)

    Broader source: Energy.gov [DOE]

    In order to prevent waste and to avoid the drilling of unnecessary wells and to encourage the development of coal seam natural gas producing areas in Louisiana, the commissioner of conservation is...

  8. 300 area TEDF permit compliance monitoring plan

    SciTech Connect (OSTI)

    BERNESKI, L.D.

    1998-11-20T23:59:59.000Z

    This document presents the permit compliance monitoring plan for the 300 Area Treated Effluent Disposal Facility (TEDF). It addresses the compliance with the National Pollutant Discharge Elimination System (NPDES) permit and Department of Natural Resources Aquatic Lands Sewer Outfall Lease.

  9. Sierra Nevada Region - Western Area Power Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Sierra Nevada Region is one of five offices in the Western Area Power Administration. SN markets power in northern and central California, and portions of Nevada, to wholesale...

  10. astronautical aste overview majors & areas of emphasis

    E-Print Network [OSTI]

    Rohs, Remo

    - communications, propulsion, structures and mechanisms, thermal control, power systems, launch systems Astronautical engineers design, build and operate space vehicles used in exploration and applications of places in areas such as electric propulsion, plasma physics, heliospheric structure, fundamental processes

  11. Fast Adaptive Silhouette Area based Template Matching

    E-Print Network [OSTI]

    Zachmann, Gabriel

    Fast Adaptive Silhouette Area based Template Matching Daniel Mohr and Gabriel Zachmann If (Technical Informatics and Computer Systems) Prof. Dr. Gabriel Zachmann (Computer Graphics) Prof. Dr Template Matching Daniel Mohr and Gabriel Zachmann Clausthal University of Technology, Department

  12. Knoxville Area Transit: Propane Hybrid Electric Trolleys

    SciTech Connect (OSTI)

    Not Available

    2005-04-01T23:59:59.000Z

    A 2-page fact sheet summarizing the evaluation done by the U.S. Department of Energy's Advanced Vehicle Testing Activity on the Knoxville Area Transit's use of propane hybrid electric trolleys.

  13. Regulating new construction in historic areas

    E-Print Network [OSTI]

    Sellers-Garcia, Oliver

    2006-01-01T23:59:59.000Z

    This study is an examination of how the restrictiveness of different design regulations impacts the process of new construction in historic areas. The North End, South End, and Back Bay neighborhoods of Boston were identified ...

  14. Critical Areas Act of 1973 (Minnesota)

    Broader source: Energy.gov [DOE]

    This Act applies to certain areas of the state with important historic, cultural, or esthetic values, or natural systems with functions of greater than local significance. Plans for a given...

  15. Using mammographic density to predict breast cancer risk: dense area or percent dense area

    E-Print Network [OSTI]

    Stone, Jennifer; Ding, Jane; Warren, Ruth M L; Duffy, Stephen; Hopper, John L

    2010-11-18T23:59:59.000Z

    and dense area were strongly associated with breast cancer risk; however, inclusion of dense area in a PDA-adjusted model improved the pre- diction of breast cancer risk, but not vice versa. This suggests that, in terms of a single parameter, dense area... dense area alone. Conclusions: As a single parameter, dense area provides more information than PDA on breast cancer risk. Introduction A number of prospective, nested case control studies have shown that, for women of the same age, those with greater...

  16. Broad-area tandem semiconductor laser

    SciTech Connect (OSTI)

    Chen, T.R.; Mehuys, D.; Zhuang, Y.H.; Mittelstein, M.; Wang, H.; Derry, P.L.; Kajanto, M.; Yariv, A.

    1988-10-17T23:59:59.000Z

    A tandem combination of a uniform gain broad-area semiconductor laser and a (lateral) periodic gain section displays a stable, near-diffraction-limited single-lobed far-field pattern. The GaAs/GaAlAs quantum well lasers display a high degree of coherence across 60-..mu..m-wide apertures provided that the broad-area section is sufficiently long.

  17. Electrical substation service-area estimation using Cellular Automata: An initial report

    SciTech Connect (OSTI)

    Fenwick, J.W.; Dowell, L.J.

    1998-07-01T23:59:59.000Z

    The service areas for electric power substations can be estimated using a Cellular Automata (CA) model. The CA model is a discrete, iterative process whereby substations acquire service area by claiming neighboring cells. The service area expands from a substation until a neighboring substation service area is met or the substation`s total capacity or other constraints are reached. The CA-model output is dependent on the rule set that defines cell interactions. The rule set is based on a hierarchy of quantitative metrics that represent real-world factors such as land use and population density. Together, the metrics determine the rate of cell acquisition and the upper bound for service area size. Assessing the CA-model accuracy requires comparisons to actual service areas. These actual service areas can be extracted from distribution maps. Quantitative assessment of the CA-model accuracy can be accomplished by a number of methods. Some are as simple as finding the percentage of cells predicted correctly, while others assess a penalty based on the distance from an incorrectly predicted cell to its correct service area. This is an initial report of a work in progress.

  18. Area and Volume Problems 1. Given the formula for the area of a square, derive the formula for the area of a rectangle

    E-Print Network [OSTI]

    Lee, Carl

    Area and Volume Problems 1. Given the formula for the area of a square, derive the formula for the area of a rectangle of dimensions a and b. 2. Given the formula for the area of a rectangle, derive the formula for the area of a parallelogram of base b and height h. 3. Use calculus to derive the formula

  19. Federal and State Ethanol and Biodiesel Requirements (released in AEO2007)

    Reports and Publications (EIA)

    2007-01-01T23:59:59.000Z

    The Energy Policy Act 2005 requires that the use of renewable motor fuels be increased from the 2004 level of just over 4 billion gallons to a minimum of 7.5 billion gallons in 2012, after which the requirement grows at a rate equal to the growth of the gasoline pool. The law does not require that every gallon of gasoline or diesel fuel be blended with renewable fuels. Refiners are free to use renewable fuels, such as ethanol and biodiesel, in geographic regions and fuel formulations that make the most sense, as long as they meet the overall standard. Conventional gasoline and diesel can be blended with renewables without any change to the petroleum components, although fuels used in areas with air quality problems are likely to require adjustment to the base gasoline or diesel fuel if they are to be blended with renewables.

  20. Review article Comparative vitamin E requirements

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    requirements for vitamin E across species may need to be redefined as new information be- comes available about vita- mine E est une vitamine essentielle, nécessaire pour toutes les espèces animales et qui fonctionne principalement comme anti-oxydant en maintenant l'intégrité des membranes cellulaires biologiques

  1. On Linguistic Quality of Natural Language Requirements

    E-Print Network [OSTI]

    Ruggieri, Salvatore

    , has now reached its limits. Like classical engineering switched from quality control to total qualityOn Linguistic Quality of Natural Language Requirements F. Fabbrini 1 , M. Fusani 1 , V. Gervasi 2 Informatica, Corso Italia 40, 56125 Pisa Italy. Abstract. We recognize the need for defining a quality model

  2. Materials Science and Engineering Graduate Program Requirements

    E-Print Network [OSTI]

    Tipple, Brett

    Materials Science and Engineering Graduate Program Requirements GRADUATE PROGRAMS The Department of Materials Science and Engineering at the University of Utah offers three graduate degrees: Master of Science petitions must be presented to the Materials Science and Engineering faculty for review and voting during

  3. Materials Science and Engineering Graduate Program Requirements

    E-Print Network [OSTI]

    Simons, Jack

    Materials Science and Engineering Graduate Program Requirements The Department of Materials Science received their B.S. degree from Materials Science and Engineering at the University of Utah and received by the Supervisory Committee All petitions must be presented to the Materials Science and Engineering faculty

  4. II. DEVICE DESCRIPTION AND GENERAL PHYSICS REQUIREMENTS

    E-Print Network [OSTI]

    parameters, heating, energy han- dling, and diagnostic capabilities. The latter speci- fies requirements To accomplish the dual goals set forth in the mis- sion statement - determination of burning plasma physics. For example, the estimated uncertainty in projecting energy confinement time for BPX is about f 25

  5. THE REQUIREMENTS OF A FUSION DEMONSTRATION

    E-Print Network [OSTI]

    Najmabadi, Farrokh

    and will analyze the strategies, facilities, and prior testing requirements needed to demonstrate electric power Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes constitute or imply its endorsement, recommendation, or favoring by the United States Government or any

  6. Electrical Engineering Graduation Requirements University of Washington

    E-Print Network [OSTI]

    Queitsch, Christine

    EE Electrical Engineering Graduation Requirements University of Washington www Chemistry with lab Phys 121 (5cr) ­ Mechanics with lab [pr: Math 124] Engineering Electives (10 Credits Analysis [pr: PHYS 122; MATH 307 & CSE 142 concurrent] Application Deadlines Professional Issues (1 Credit

  7. CRAD, Facility Safety- Technical Safety Requirements

    Broader source: Energy.gov [DOE]

    A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) that can be used for assessment of a contractor's Technical Safety Requirments (TSA).

  8. Determination of Optimal Electricity Reserve Requirements

    E-Print Network [OSTI]

    load demand forecast error, the wind production forecast error and the failures of the power plants of wind power production and power load demand 14 2.4.2 Mega Watts failed to avoid it is to allocate electricity reserves and use them to balance up the system if required

  9. Computer Science Graduation Requirements Checklist Spring 2006

    E-Print Network [OSTI]

    Zadok, Erez

    Computer Science Graduation Requirements Checklist ­ Spring 2006 Computer Science Courses Course Gr. Sem. Comments CSE 113 Foundations of Computer Science I CSE 114 Computer Science I [prerequisite: CSE 110] CSE 213 Foundations of Computer Science II CSE 214 Computer Science II CSE 219 Computer Science

  10. PURCH0857 SCOPING SPECIFICATION SCHEDULE OF REQUIREMENTS

    E-Print Network [OSTI]

    Glasgow, University of

    environment to work and study in; and A reduction in energy consumption. This Strategic Plan in the UK. It is consistently rated top in the UK by the International Student Barometer for sports development strategy. The existing GUU is category B listed and as such adaptation will require

  11. PID Controller Synthesis with Specified Stability Requirement

    E-Print Network [OSTI]

    Gundes, A. N.

    PID Controller Synthesis with Specified Stability Requirement for Some Classes of MIMO Systems T. S+Integral+Derivative (PID) con- trollers, where the closed-loop poles can be assigned to the left of an axis shifted PID-controllers with this property of small negative real-part assignability of closed-loop poles

  12. Library Requirements for New Programs and

    E-Print Network [OSTI]

    Saskatchewan, University of

    Library Requirements for New Programs and Major Revisions This form is to be completed the University Library, University of Saskatchewan. Contact the appropriate Liaison Librarian for assistance. 1/College: Degree Level (undergraduate or graduate) 2. Library Resources 2.1 Resources are/will be located mainly

  13. Air Quality: Construction Project Air Permit Requirements

    E-Print Network [OSTI]

    Wechsler, Risa H.

    Air Quality: Construction Project Air Permit Requirements Department: Chemical and General Safety Program: Air Quality Owner: Program Manager Authority: ES&H Manual, Chapter 30, Air Quality1 All manager or operator must submit the completed form to the air quality program manager before the project

  14. THESIS/DISSERTATION GUIDE Requirements and Guidelines

    E-Print Network [OSTI]

    Omiecinski, Curtis

    THESIS/DISSERTATION GUIDE 2012 Requirements and Guidelines for the Preparation of Master's Theses and Doctoral Dissertations Office of Theses and Dissertations 115 Kern Building University Park, PA 16802 phone://www.gradsch.psu.edu/current/thesis.html #12;1 INTRODUCTION The primary purpose of a thesis or dissertation is to train the student

  15. Methane Activation Structural and Mechanistic Requirements for

    E-Print Network [OSTI]

    Iglesia, Enrique

    Methane Activation Structural and Mechanistic Requirements for Methane Activation and Chemical and petrochemical processes and in fuel cells. The strong bonds in CH4 (439 kJmolÀ1 [1] ) and the endothermic nature by BP as part of the Methane Conversion Cooperative Research Program at the University of California

  16. The Long Wavelength Array System Technical Requirements

    E-Print Network [OSTI]

    Ellingson, Steven W.

    (frequency) DR Dynamic Range EMC Electromagnetic Compatibility FOV Field of View G.N.D. Galactic Noise Intermediate Array with 16 antennas (core) MCS Monitor and Control System ns nanosecond RFI Radio FrequencyThe Long Wavelength Array System Technical Requirements Version: Draft #9 2007-November-19 Compiled

  17. Environmental assessment for the salvage/demolition of 200 West Area, 200 East Area, and 300 Area steam plants

    SciTech Connect (OSTI)

    NONE

    1996-10-01T23:59:59.000Z

    This environmental assessment has been prepared to assess potential environmental impacts associated with the US Department of Energy`s proposed action: the salvage/demolition of the 200 West Area, 200 East Area, and 300 Area Steam Plants and steam distribution piping. Impact information will be used by the US Department of Energy, Richland Operations Office Manager, to determine if the proposed action is a major federal action significantly affecting the quality of the human environment. If the proposed action is determined to be major and significant, an environmental impact statement will be prepared. If the proposed action is determined not to be major and significant, a Finding of No Significant Impact (FONSI) will be issued and the action can proceed. The proposed action involves the salvage and demolition of the 200 West Area, 200 East Are, and 300 Area steam plants and their associated steam distribution piping, equipment, and ancillary facilities. Activities include the salvaging and recycling of all materials, wastes, and equipment where feasible, with waste minimization efforts utilized.

  18. Lead Coolant Test Facility Technical and Functional Requirements, Conceptual Design, Cost and Construction Schedule

    SciTech Connect (OSTI)

    Soli T. Khericha

    2006-09-01T23:59:59.000Z

    This report presents preliminary technical and functional requirements (T&FR), thermal hydraulic design and cost estimate for a lead coolant test facility. The purpose of this small scale facility is to simulate lead coolant fast reactor (LFR) coolant flow in an open lattice geometry core using seven electrical rods and liquid lead or lead-bismuth eutectic. Based on review of current world lead or lead-bismuth test facilities and research need listed in the Generation IV Roadmap, five broad areas of requirements of basis are identified: Develop and Demonstrate Prototype Lead/Lead-Bismuth Liquid Metal Flow Loop Develop and Demonstrate Feasibility of Submerged Heat Exchanger Develop and Demonstrate Open-lattice Flow in Electrically Heated Core Develop and Demonstrate Chemistry Control Demonstrate Safe Operation and Provision for Future Testing. These five broad areas are divided into twenty-one (21) specific requirements ranging from coolant temperature to design lifetime. An overview of project engineering requirements, design requirements, QA and environmental requirements are also presented. The purpose of this T&FRs is to focus the lead fast reactor community domestically on the requirements for the next unique state of the art test facility. The facility thermal hydraulic design is based on the maximum simulated core power using seven electrical heater rods of 420 kW; average linear heat generation rate of 300 W/cm. The core inlet temperature for liquid lead or Pb/Bi eutectic is 420oC. The design includes approximately seventy-five data measurements such as pressure, temperature, and flow rates. The preliminary estimated cost of construction of the facility is $3.7M. It is also estimated that the facility will require two years to be constructed and ready for operation.

  19. HVDC control developments - addressing system requirements

    SciTech Connect (OSTI)

    Hauth, R.L.; Patel, H.S.; Piwko, R.J.

    1984-01-01T23:59:59.000Z

    This article describes typical high voltage direct current (HVDC) control systems and some of the new developments in the control area. HVDC control systems are showing their flexible characteristics as demonstrated, for example, by the new modulation, torsional damping, and alternating current voltage and reactive power controllers. Extensive studies are conducted to design and integrate such controllers into HVDC systems and to assure against any detrimental interactions within the total control system. 8 figures.

  20. Reducing biosolids disposal costs using land application in forested areas

    SciTech Connect (OSTI)

    Huffines, R.L.

    1995-11-01T23:59:59.000Z

    Switching biosolids land application from a reclamation site to a forested site significantly reduced the cost of biosolids disposal at the Savannah River Site. Previous beneficial reuse programs focused on reclamation of existing borrow pits. While extremely beneficial, this program became very costly due to the regulatory requirements for groundwater monitoring, soil monitoring and frequent biosolids analyses. A new program was developed to reuse biosolids in forested areas where the biosolids could be used as a soil conditioner and fertilizer to enhance timber yield. The forested land application site was designed so that groundwater monitoring and soil monitoring could be eliminated while biosolids monitoring and site maintenance were minimized. Monitoring costs alone were reduced by 80%. Capital costs for site preparation were also significantly reduced since there was no longer a need for expensive groundwater monitoring wells.

  1. Estimation of contamination volume at Seaway Area A, New York.

    SciTech Connect (OSTI)

    Durham, L.; Johnson, R.

    1999-08-04T23:59:59.000Z

    The purpose of this analysis was to estimate the volume of soil with a radioactive contaminant activity level above the cleanup Guideline at Seaway Area A, Tonawanda, New York. A site-specific cleanup guideline of 40 pCi/g thorium-230 was derived for Seaway, as well as for the nearby Ashland 1 and Ashland 2 sites. All three are Formerly Utilized Sites Remedial Action Program (FUSRAP) properties. The level was developed to ensure protection of human health and the environment and compliance with applicable or relevant and appropriate requirements. The available data included historical discrete soil samples taken at the surface and at depth and results of a surficial gamma walkover with a sodium iodide (NaI) 2x2 sensor. The balance of this document provides background information about the site and discusses the available data sets, the methodology used, and the results and conclusions from the analysis.

  2. XXX CORE COURSES SFA MAJOR REQUIREMENTS SFA Communication (1214 hours) College requirements

    E-Print Network [OSTI]

    Long, Nicholas

    XXX CORE COURSES SFA MAJOR REQUIREMENTS SFA Communication (1214 hours) College requirements,1412 SPAN 1411,1412 beginning foreign language SPH 172, 272. Note 2 35 hours of mathematics from XXX Core College of Fine Arts (936) 4684804 Office of Admissions (936) 4682504 and XXXXX COLLEGE 200809 XXX

  3. Landscape & Nursery Internship Requirements 11-26-07 LANDSCAPE AND NURSERY INTERNSHIP OVERVIEW & REQUIREMENTS

    E-Print Network [OSTI]

    Landscape & Nursery Internship Requirements 11-26-07 LANDSCAPE AND NURSERY INTERNSHIP OVERVIEW & REQUIREMENTS It is the student's responsibility to set-up their internship with approval from their coordinator at the end of March. Typically, students begin their internships in April and work through mid-August. You

  4. Wholesale Electricity PriceWholesale Electricity Price and Retail Requirements,and Retail Requirements,

    E-Print Network [OSTI]

    Requirements, and Natural Gas Priceand Natural Gas Price ForecastsForecasts Michael Schilmoeller Power Natural gas price #12;Page 2 3 Current Electricity Price ForecastCurrent Electricity Price Forecast recent electricity requirements forecast Most recent (11/28/2008) natural gas price forecast

  5. Water Heating Requirements Overview Page 5-1 5 Water Heating Requirements

    E-Print Network [OSTI]

    Water Heating Requirements ­ Overview Page 5-1 5 Water Heating Requirements 5.1 Overview 5.1.1 Water Heating Energy Water heating energy use is an important end use in low-rise residential buildings. Roughly 90 percent of California households use natural gas fueled water heaters, typically storage gas

  6. Area Monitoring Dosimeter Program for the Pacific Northwest National Laboratory: Results for CY 2005

    SciTech Connect (OSTI)

    Bivins, Steven R.; Stoetzel, Gregory A.

    2006-06-21T23:59:59.000Z

    Pacific Northwest National Laboratory (PNNL) established an area monitoring dosimeter program in accordance with Article 514 of the Department of Energy (DOE) Radiological Control Manual (RCM) in January 1993. This program is to minimize the number of areas requiring issuance of personnel dosimeters and to demonstrate that doses outside Radiological Buffer Areas are negligible. In accordance with 10 CFR Part 835.402 (a)(1)-(4) and Article 511.1 of the PNNL Radiological Control Program Description, personnel dosimetry shall be provided to (1) radiological workers who are likely to receive at least 100 mrem annually, and (2) declared pregnant workers, minors, and members of the public who are likely to receive at least 50 mrem annually. Program results for calendar years 1993-2005 confirm that personnel dosimetry is not needed for individuals located in areas monitored by the program

  7. Area Monitoring Dosimeter Program for the Pacific Northwest National Laboratory: Results for CY 2006

    SciTech Connect (OSTI)

    Bivins, Steven R.; Stoetzel, Gregory A.

    2007-07-19T23:59:59.000Z

    Pacific Northwest National Laboratory (PNNL) established an area monitoring dosimeter program in accordance with Article 514 of the Department of Energy (DOE) Radiological Control Manual (RCM) in January 1993. This program is to minimize the number of areas requiring issuance of personnel dosimeters and to demonstrate that doses outside Radiological Buffer Areas are negligible. In accordance with 10 CFR Part 835.402 (a)(1)-(4) and Article 511.1 of the PNNL Radiological Control Program Description, personnel dosimetry shall be provided to 1) radiological workers who are likely to receive at least 100 mrem annually, and 2) declared pregnant workers, minors, and members of the public who are likely to receive at least 50 mrem annually. Program results for calendar years 1993-2005 confirm that personnel dosimetry is not needed for individuals located in areas monitored by the program.

  8. Area Monitoring Dosimeter Program for the Pacific Northwest National Laboratory: Results for CY 2000

    SciTech Connect (OSTI)

    Bivins, Steven R.; Stoetzel, Gregory A.

    2001-07-05T23:59:59.000Z

    Pacific Northwest National Laboratory (PNNL) established an area monitoring dosimeter program in accordance with Article 514 of the Department of Energy (DOE) Radiological Control Manual (RCM) in January 1993. This program is to minimize the number of areas requiring issuance of personnel dosimeters and to demonstrate that doses outside Radiological Buffer Areas are negligible. In accordance with 10 CFR Part 835.402 (a) (1)-(4) and Article 511.1 of the DOE Standard Radiological Control, personnel dosimetry shall be provided to 1) radiological workers who are likely to receive at least 100 mrem annually, and 2) declared pregnant workers, minors, and members of the public who are likely to receive at least 50 mrem annually. Program results for calendar years 1993-2000 confirm that personnel dosimetry is not needed for individuals located in areas monitored by the program.

  9. Area Monitoring Dosimeter Program for the Pacific Northwest National Laboratory: Results for CY 2001

    SciTech Connect (OSTI)

    Bivins, Steven R.; Stoetzel, Gregory A.

    2002-07-08T23:59:59.000Z

    Pacific Northwest National Laboratory (PNNL) established an area monitoring dosimeter program in accordance with Article 514 of the U.S. Department of Energy (DOE) Radiological Control Manual (RCM) in January 1993. This program is to minimize the number of areas requiring issuance of personnel dosimeters and to demonstrate that doses outside Radiological Buffer Areas are negligible. In accordance with 10 CFR Part 835.402 (a) (1)-(4) and Article 511.1 of the PNNL Radiological Control Program Description, personnel dosimetry shall be provided to 1) radiological workers who are likely to receive at least 100 mrem annually, and 2) declared pregnant workers, minors, and members of the public who are likely to receive at least 50 mrem annually. Program results for calendar years 1993-2001 confirm that personnel dosimetry is not needed for individuals located in areas monitored by the program.

  10. Scientific Application Requirements for Leadership Computing at the Exascale

    SciTech Connect (OSTI)

    Ahern, Sean [ORNL; Alam, Sadaf R [ORNL; Fahey, Mark R [ORNL; Hartman-Baker, Rebecca J [ORNL; Barrett, Richard F [ORNL; Kendall, Ricky A [ORNL; Kothe, Douglas B [ORNL; Mills, Richard T [ORNL; Sankaran, Ramanan [ORNL; Tharrington, Arnold N [ORNL; White III, James B [ORNL

    2007-12-01T23:59:59.000Z

    The Department of Energy s Leadership Computing Facility, located at Oak Ridge National Laboratory s National Center for Computational Sciences, recently polled scientific teams that had large allocations at the center in 2007, asking them to identify computational science requirements for future exascale systems (capable of an exaflop, or 1018 floating point operations per second). These requirements are necessarily speculative, since an exascale system will not be realized until the 2015 2020 timeframe, and are expressed where possible relative to a recent petascale requirements analysis of similar science applications [1]. Our initial findings, which beg further data collection, validation, and analysis, did in fact align with many of our expectations and existing petascale requirements, yet they also contained some surprises, complete with new challenges and opportunities. First and foremost, the breadth and depth of science prospects and benefits on an exascale computing system are striking. Without a doubt, they justify a large investment, even with its inherent risks. The possibilities for return on investment (by any measure) are too large to let us ignore this opportunity. The software opportunities and challenges are enormous. In fact, as one notable computational scientist put it, the scale of questions being asked at the exascale is tremendous and the hardware has gotten way ahead of the software. We are in grave danger of failing because of a software crisis unless concerted investments and coordinating activities are undertaken to reduce and close this hardwaresoftware gap over the next decade. Key to success will be a rigorous requirement for natural mapping of algorithms to hardware in a way that complements (rather than competes with) compilers and runtime systems. The level of abstraction must be raised, and more attention must be paid to functionalities and capabilities that incorporate intent into data structures, are aware of memory hierarchy, possess fault tolerance, exploit asynchronism, and are power-consumption aware. On the other hand, we must also provide application scientists with the ability to develop software without having to become experts in the computer science components. Numerical algorithms are scattered broadly across science domains, with no one particular algorithm being ubiquitous and no one algorithm going unused. Structured grids and dense linear algebra continue to dominate, but other algorithm categories will become more common. A significant increase is projected for Monte Carlo algorithms, unstructured grids, sparse linear algebra, and particle methods, and a relative decrease foreseen in fast Fourier transforms. These projections reflect the expectation of much higher architecture concurrency and the resulting need for very high scalability. The new algorithm categories that application scientists expect to be increasingly important in the next decade include adaptive mesh refinement, implicit nonlinear systems, data assimilation, agent-based methods, parameter continuation, and optimization. The attributes of leadership computing systems expected to increase most in priority over the next decade are (in order of importance) interconnect bandwidth, memory bandwidth, mean time to interrupt, memory latency, and interconnect latency. The attributes expected to decrease most in relative priority are disk latency, archival storage capacity, disk bandwidth, wide area network bandwidth, and local storage capacity. These choices by application developers reflect the expected needs of applications or the expected reality of available hardware. One interpretation is that the increasing priorities reflect the desire to increase computational efficiency to take advantage of increasing peak flops [floating point operations per second], while the decreasing priorities reflect the expectation that computational efficiency will not increase. Per-core requirements appear to be relatively static, while aggregate requirements will grow with the system. This projection is consistent with a r

  11. Evaluating the Impact of Solar Generation on Balancing Requirements in Southern Nevada System

    SciTech Connect (OSTI)

    Ma, Jian; Lu, Shuai; Etingov, Pavel V.; Makarov, Yuri V.

    2012-07-26T23:59:59.000Z

    Abstract—In this paper, the impacts of solar photovoltaic (PV) generation on balancing requirements including regulation and load following in the Southern Nevada balancing area are analyzed. The methodology is based on the “swinging door” algorithm and a probability box method developed by PNNL. The regulation and load following signals are mimicking the system’s scheduling and real-time dispatch processes. Load, solar PV generation and distributed PV generation (DG) data are used in the simulation. Different levels of solar PV generation and DG penetration profiles are used in the study. Sensitivity of the regulation requirements with respect to real-time solar PV generation forecast errors is analyzed.

  12. Metropolitan area network support at Fermilab

    SciTech Connect (OSTI)

    DeMar, Phil; Andrews, Chuck; Bobyshev, Andrey; Crawford, Matt; Colon, Orlando; Fry, Steve; Grigaliunas, Vyto; Lamore, Donna; Petravick, Don; /Fermilab

    2007-09-01T23:59:59.000Z

    Advances in wide area network service offerings, coupled with comparable developments in local area network technology have enabled many research sites to keep their offsite network bandwidth ahead of demand. For most sites, the more difficult and costly aspect of increasing wide area network capacity is the local loop, which connects the facility LAN to the wide area service provider(s). Fermilab, in coordination with neighboring Argonne National Laboratory, has chosen to provide its own local loop access through leasing of dark fiber to nearby network exchange points, and procuring dense wave division multiplexing (DWDM) equipment to provide data channels across those fibers. Installing and managing such optical network infrastructure has broadened the Laboratory's network support responsibilities to include operating network equipment that is located off-site, and is technically much different than classic LAN network equipment. Effectively, the Laboratory has assumed the role of a local service provider. This paper will cover Fermilab's experiences with deploying and supporting a Metropolitan Area Network (MAN) infrastructure to satisfy its offsite networking needs. The benefits and drawbacks of providing and supporting such a service will be discussed.

  13. Development of Regulatory Technical Requirements for the Advanced Integral Type Research Reactor

    SciTech Connect (OSTI)

    Jo, Jong Chull; Yune, Young Gill; Kim, Woong Sik; Kim, Hho Jung [Korea Institute of Nuclear Safety, 19 Kusung-dong, Yusung-ku, Taejon, 305-338 (Korea, Republic of)

    2004-07-01T23:59:59.000Z

    This paper presents the current status of the study on the development of regulatory technical requirements for the licensing review of an advanced integral type research reactor of which the license application is expected in a few years. According to the Atomic Energy Act of Korea, both research and education reactors are subject to the technical requirements for power reactors in the licensing review. But, some of the requirements may not be applicable or insufficient for the licensing reviews of reactors with unique design features. Thus it is necessary to identify which review topics or areas can not be addressed by the existing requirements and to develop the required ones newly or supplement appropriately. Through the study performed so far, it has been identified that the following requirements need to be developed newly for the licensing review of SMART-P: the use of proven technology, the interfacial facility, the non-safety systems, and the metallic fuels. The approach and basis for the development of each of the requirements are discussed. (authors)

  14. RADIOACTIVE MATERIAL PACKAGING TORQUE REQUIREMENTS COMPLIANCE

    SciTech Connect (OSTI)

    Watkins, R.; Leduc, D.

    2011-03-24T23:59:59.000Z

    Shipping containers used to transport radioactive material (RAM) in commerce employ a variety of closure mechanisms. Often, these closure mechanisms require a specific amount of torque be applied to a bolt, nut or other threaded fastener. It is important that the required preload is achieved so that the package testing and analysis is not invalidated for the purpose of protecting the public. Torque compliance is a means of ensuring closure preload, is a major factor in accomplishing the package functions of confinement/containment, sub-criticality, and shielding. This paper will address the importance of applying proper torque to package closures, discuss torque value nomenclature, and present one methodology to ensure torque compliance is achieved.

  15. Frequency Control Performance Measurement and Requirements

    SciTech Connect (OSTI)

    Illian, Howard F.

    2010-12-20T23:59:59.000Z

    Frequency control is an essential requirement of reliable electric power system operations. Determination of frequency control depends on frequency measurement and the practices based on these measurements that dictate acceptable frequency management. This report chronicles the evolution of these measurements and practices. As technology progresses from analog to digital for calculation, communication, and control, the technical basis for frequency control measurement and practices to determine acceptable performance continues to improve. Before the introduction of digital computing, practices were determined largely by prior experience. In anticipation of mandatory reliability rules, practices evolved from a focus primarily on commercial and equity issues to an increased focus on reliability. This evolution is expected to continue and place increased requirements for more precise measurements and a stronger scientific basis for future frequency management practices in support of reliability.

  16. Improvements to Technical Specifications surveillance requirements

    SciTech Connect (OSTI)

    Lobel, R.; Tjader, T.R.

    1992-12-01T23:59:59.000Z

    In August 1983 an NRC task group was formed to investigate problems with surveillance testing required by Technical Specifications, and to recommend approaches to effect improvements. NUREG-1024 ( Technical Specifications-Enhancing Safety Impact'') resulted, and it contained recommendations to review the basis for test frequencies; to ensure that the tests promote safety and do not degrade equipment; and to review surveillance tests so that they do not unnecessarily burden personnel. The Technical Specifications Improvement Program (TSIP) was established in December 1984 to provide the framework for rewriting and improving the Technical Specifications. As an element of the TSIP, all Technical Specifications surveillance requirements were comprehensively examined as recommended in NUREG-1024. The results of that effort are presented in this report. The study found that while some testing at power is essential to verify equipment and system operability, safety can be improved, equipment degradation decreased, and unnecessary personnel burden relaxed by reducing the amount of testing at power.

  17. Technical degree requirements: BSCE Engineering Sci.

    E-Print Network [OSTI]

    Alvarez-Cohen, Lisa

    Technical degree requirements: BSCE Engineering Sci. Elective (1) Math 1B (Math 1A) Phys 7A (Math 1 177 (CE 120, CE 175) CE 180 Engineering Electives 15 units CE 192 ME 40 (E 7, Math 1B, Chem 1A, Phys 7 (1) Bio 1B CE 70 (Chem 1A) Fall ONLY Spring ONLY (Math 1A) Prerequisite (Chem 1A) Concurrent

  18. Cyber Security Requirements for Risk Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-02-19T23:59:59.000Z

    The Notice ensures that system owners consistently assess the threats to and vulnerabilities of systems in order to implement adequate security controls. The Notice will also ensure compliance with the requirements of DOE O 205.1, Department of Energy Cyber Security Management Program, dated 3-21-03, and protect DOE information and information systems from unauthorized access, use, disclosure, modification, or destruction. DOE N 205.15, dated 3/18/05, extends this directive until 3/18/06.

  19. Redelegation Procedures - DOE Directives, Delegations, and Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Scienceand Requirements Recently Approved Justification

  20. Vital area identification for U.S. Nuclear Regulatory Commission nuclear power reactor licensees and new reactor applicants.

    SciTech Connect (OSTI)

    Whitehead, Donnie Wayne; Varnado, G. Bruce

    2008-09-01T23:59:59.000Z

    U.S. Nuclear Regulatory Commission nuclear power plant licensees and new reactor applicants are required to provide protection of their plants against radiological sabotage, including the placement of vital equipment in vital areas. This document describes a systematic process for the identification of the minimum set of areas that must be designated as vital areas in order to ensure that all radiological sabotage scenarios are prevented. Vital area identification involves the use of logic models to systematically identify all of the malicious acts or combinations of malicious acts that could lead to radiological sabotage. The models available in the plant probabilistic risk assessment and other safety analyses provide a great deal of the information and basic model structure needed for the sabotage logic model. Once the sabotage logic model is developed, the events (or malicious acts) in the model are replaced with the areas in which the events can be accomplished. This sabotage area logic model is then analyzed to identify the target sets (combinations of areas the adversary must visit to cause radiological sabotage) and the candidate vital area sets (combinations of areas that must be protected against adversary access to prevent radiological sabotage). Any one of the candidate vital area sets can be selected for protection. Appropriate selection criteria will allow the licensee or new reactor applicant to minimize the impacts of vital area protection measures on plant safety, cost, operations, or other factors of concern.

  1. Biological and Environmental Research Network Requirements

    SciTech Connect (OSTI)

    Balaji, V. [Princeton Univ., NJ (United States). Earth Science Grid Federation (ESGF); Boden, Tom [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Cowley, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dart, Eli [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). ESNet; Dattoria, Vince [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). ESNet; Desai, Narayan [Argonne National Lab. (ANL), Argonne, IL (United States); Egan, Rob [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Foster, Ian [Argonne National Lab. (ANL), Argonne, IL (United States); Goldstone, Robin [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gregurick, Susan [U.S. Dept. of Energy, Washington, DC (United States). Biological Systems Science Division; Houghton, John [U.S. Dept. of Energy, Washington, DC (United States). Biological and Environmental Research (BER) Program; Izaurralde, Cesar [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Johnston, Bill [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). ESNet; Joseph, Renu [U.S. Dept. of Energy, Washington, DC (United States). Climate and Environmental Sciences Division; Kleese-van Dam, Kerstin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lipton, Mary [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Monga, Inder [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). ESNet; Pritchard, Matt [British Atmospheric Data Centre (BADC), Oxon (United Kingdom); Rotman, Lauren [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). ESNet; Strand, Gary [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Stuart, Cory [Argonne National Lab. (ANL), Argonne, IL (United States); Tatusova, Tatiana [National Inst. of Health (NIH), Bethesda, MD (United States); Tierney, Brian [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). ESNet; Thomas, Brian [Univ. of California, Berkeley, CA (United States); Williams, Dean N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Zurawski, Jason [Internet2, Washington, DC (United States)

    2013-09-01T23:59:59.000Z

    The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the U.S. Department of Energy (DOE) Office of Science (SC), the single largest supporter of basic research in the physical sciences in the United States. In support of SC programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet be a highly successful enabler of scientific discovery for over 25 years. In November 2012, ESnet and the Office of Biological and Environmental Research (BER) of the DOE SC organized a review to characterize the networking requirements of the programs funded by the BER program office. Several key findings resulted from the review. Among them: 1) The scale of data sets available to science collaborations continues to increase exponentially. This has broad impact, both on the network and on the computational and storage systems connected to the network. 2) Many science collaborations require assistance to cope with the systems and network engineering challenges inherent in managing the rapid growth in data scale. 3) Several science domains operate distributed facilities that rely on high-performance networking for success. Key examples illustrated in this report include the Earth System Grid Federation (ESGF) and the Systems Biology Knowledgebase (KBase). This report expands on these points, and addresses others as well. The report contains a findings section as well as the text of the case studies discussed at the review.

  2. Detector Requirements to Curb Nuclear Smuggling

    SciTech Connect (OSTI)

    Erickson, S A

    2001-11-14T23:59:59.000Z

    The problem of stopping nuclear smuggling of terrorist nuclear devices is a complex one, owing to the variety of pathways by which such a device can be transported. To fashion new detection systems that improve the chances of detecting such a device, it is important to know the various requirements and conditions that would be imposed on them by both the types of devices that might be smuggled and by the requirement that it not overly interfere with the transportation of legitimate goods. Requirements vary greatly from low-volume border crossings to high-volume industrial container ports, and the design of systems for them is likely to be quite different. There is also a further need to detect these devices if they are brought into a country via illicit routes, i.e., those which do not pass through customs posts, but travel overland though open space or to a smaller, unguarded airport or seaport. This paper describes some generic uses of detectors, how they need to be integrated into customs or other law enforcement systems, and what the specifications for such detectors might be.

  3. The QUEST Large Area CCD Camera

    E-Print Network [OSTI]

    Charlie Baltay; David Rabinowitz; Peter Andrews; Anne Bauer; Nancy Ellman; William Emmet; Rebecca Hudson; Thomas Hurteau; Jonathan Jerke; Rochelle Lauer; Julia Silge; Andrew Szymkowiak; Brice Adams; Mark Gebhard; James Musser; Michael Doyle; Harold Petrie; Roger Smith; Robert Thicksten; John Geary

    2007-02-21T23:59:59.000Z

    We have designed, constructed and put into operation a very large area CCD camera that covers the field of view of the 1.2 m Samuel Oschin Schmidt Telescope at the Palomar Observatory. The camera consists of 112 CCDs arranged in a mosaic of four rows with 28 CCDs each. The CCDs are 600 x 2400 pixel Sarnoff thinned, back illuminated devices with 13 um x 13 um pixels. The camera covers an area of 4.6 deg x 3.6 deg on the sky with an active area of 9.6 square degrees. This camera has been installed at the prime focus of the telescope, commissioned, and scientific quality observations on the Palomar-QUEST Variability Sky Survey were started in September of 2003. The design considerations, construction features, and performance parameters of this camera are described in this paper.

  4. Tanks Focus Area FY 1996 Site Needs Assessment

    SciTech Connect (OSTI)

    NONE

    1996-03-01T23:59:59.000Z

    The Tanks Focus Area`s (TFA`s) mission is to manage an integrated technology development program that results in the application of technology to safely and efficiently accomplish tank waste remediation across the US Department of Energy (DOE) complex. The TFA uses a systematic process for developing its annual program that draws from the tanks technology development needs expressed by four DOE tank waste sites--Hanford, Idaho, Oak Ridge, and Savannah River Sites. The process is iterative and involves four steps: (1) identify and validate tank technology needs at these four sites, (2) define a technical program that responds to these needs, (3) select specific tasks and schedules that accomplish program objectives, and (4) develop integrated teams to carry out selected tasks. This document describes the first of these four steps: identification of sites` tank technology needs. This step concentrates solely on needs identification, collection, and validation. Funding requirements and specific scope of responsive technical activities are not considered until later steps in program definition. This year, the collection and validation of site needs were accomplished through written input from the Site Technology Coordination Groups (STCGs). The TFA recognizes the importance of a continuing solid partnership with the sites through the STCG and DOE as well as contractor users and, therefore, ensured site participation and close coordination throughout the process.

  5. Rye Patch Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f < RAPID‎ |Rippey Jump to:WY) JumpLand Focus AreaGeothermal Area Jump

  6. Lawrence Livermore National Laboratory Emergency Response Capability Baseline Needs Assessment Requirement Document

    SciTech Connect (OSTI)

    Sharry, J A

    2009-12-30T23:59:59.000Z

    This revision of the LLNL Fire Protection Baseline Needs Assessment (BNA) was prepared by John A. Sharry, LLNL Fire Marshal and LLNL Division Leader for Fire Protection and reviewed by Martin Gresho, Sandia/CA Fire Marshal. The document follows and expands upon the format and contents of the DOE Model Fire Protection Baseline Capabilities Assessment document contained on the DOE Fire Protection Web Site, but only address emergency response. The original LLNL BNA was created on April 23, 1997 as a means of collecting all requirements concerning emergency response capabilities at LLNL (including response to emergencies at Sandia/CA) into one BNA document. The original BNA documented the basis for emergency response, emergency personnel staffing, and emergency response equipment over the years. The BNA has been updated and reissued five times since in 1998, 1999, 2000, 2002, and 2004. A significant format change was performed in the 2004 update of the BNA in that it was 'zero based.' Starting with the requirement documents, the 2004 BNA evaluated the requirements, and determined minimum needs without regard to previous evaluations. This 2010 update maintains the same basic format and requirements as the 2004 BNA. In this 2010 BNA, as in the previous BNA, the document has been intentionally divided into two separate documents - the needs assessment (1) and the compliance assessment (2). The needs assessment will be referred to as the BNA and the compliance assessment will be referred to as the BNA Compliance Assessment. The primary driver for separation is that the needs assessment identifies the detailed applicable regulations (primarily NFPA Standards) for emergency response capabilities based on the hazards present at LLNL and Sandia/CA and the geographical location of the facilities. The needs assessment also identifies areas where the modification of the requirements in the applicable NFPA standards is appropriate, due to the improved fire protection provided, the remote location and low population density of some the facilities. As such, the needs assessment contains equivalencies to the applicable requirements. The compliance assessment contains no such equivalencies and simply assesses the existing emergency response resources to the requirements of the BNA and can be updated as compliance changes independent of the BNA update schedule. There are numerous NFPA codes and standards and other requirements and guidance documents that address the subject of emergency response. These requirements documents are not always well coordinated and may contain duplicative or conflicting requirements or even coverage gaps. Left unaddressed, this regulatory situation results in frequent interpretation of requirements documents. Different interpretations can then lead to inconsistent implementation. This BNA addresses this situation by compiling applicable requirements from all identified sources (see Section 5) and analyzing them collectively to address conflict and overlap as applicable to the hazards presented by the LLNL and Sandia/CA sites (see Section 7). The BNA also generates requirements when needed to fill any identified gaps in regulatory coverage. Finally, the BNA produces a customized simple set of requirements, appropriate for the DOE protection goals, such as those defined in DOE O 420.1B, the hazard level, the population density, the topography, and the site layout at LLNL and Sandia/CA that will be used as the baseline requirements set - the 'baseline needs' - for emergency response at LLNL and Sandia/CA. A template approach is utilized to accomplish this evaluation for each of the nine topical areas that comprise the baseline needs for emergency response. The basis for conclusions reached in determining the baseline needs for each of the topical areas is presented in Sections 7.1 through 7.9. This BNA identifies only mandatory requirements and establishes the minimum performance criteria. The minimum performance criteria may not be the level of performance desired Lawrence Livermore National Laboratory or Sandia/CA

  7. Area Monitoring Dosimeter Program for the Pacific Northwest National Laboratory: Results for CY 1999

    SciTech Connect (OSTI)

    Bivins, Steven R.; Stoetzel, Gregory A.

    2000-09-19T23:59:59.000Z

    In January 1993, PNNL established an area monitoring dosimeter program in accordance with Article 514 of the DOE Radiological Control Manual. This program was to minimize the number of areas requiring issuance of personnel dosimeters and to demonstrate that doses outside Radiological Buffer Areas are negligible. In accordance with 10 CFR Part 835.402 (a)(1)-(4) and Article 511.1 of the DOE Standard Radiological Control, personnel dosimetry shall be provided to 1) radiological workers who are likely to receive at least 100 mrem annually and 2) declared pregnant workers, minors, and members of the public who are likely to receive at least 50 mrem annually. Program results for calendar years 1993-1998 confirmed that personnel dosimetry was not needed for individuals located in areas monitored by the program. A total of 123 area thermoluminescent dosimeters (TLDs) were placed in PNNL facilities during calendar year 1999. The TLDs were exchanged and analyzed quarterly. All routine area monitoring TLD results were less than 50 mrem annually after correcting for worker occupancy. The results support the conclusion that personnel dosimeters are not necessary for staff, declared pregnant workers, minors, or members of the public in these monitored areas.

  8. Characterization ReportOperational Closure Covers for the Area 5 Radioactive Waste Management Site at the Nevada Test Site

    SciTech Connect (OSTI)

    Bechtel Nevada Geotechnical Sciences

    2005-06-01T23:59:59.000Z

    Bechtel Nevada (BN) manages two low-level Radioactive Waste Management Sites (RWMSs) at the Nevada Test Site (NTS) for the U.S. Department of Energy (DOE) National Nuclear Security Administration Nevada Site Office (NNSA/NSO). The Area 3 RWMS is located in south-central Yucca Flat and the Area 5 RWMS is located about 15 miles south, in north-central Frenchman Flat. Though located in two separate topographically closed basins, they are similar in climate and hydrogeologic setting. The Area 5 RWMS uses engineered shallow-land burial cells to dispose of packaged waste, while the Area 3 RWMS uses subsidence craters formed from underground testing of nuclear weapons for the disposal of packaged and unpackaged bulk waste. Over the next several decades, most waste disposal units at both the Area 3 and Area 5 RWMSs are anticipated to be closed. Closure of the Area 3 and Area 5 RWMSs will proceed through three phases: operational closure, final closure, and institutional control. Many waste disposal units at the Area 5RWMS are operationally closed and final closure has been placed on one unit at the Area 3 RWMS (U-3ax/bl). Because of the similarities between the two sites (e.g., type of wastes, environmental factors, operational closure cover designs, etc.), many characterization studies and data collected at the Area 3 RWMS are relevant and applicable to the Area 5 RWMS. For this reason, data and closure strategies from the Area 3 RWMS are referred to as applicable. This document is an interim Characterization Report – Operational Closure Covers, for the Area 5 RWMS. The report briefly describes the Area 5 RWMS and the physical environment where it is located, identifies the regulatory requirements, reviews the approach and schedule for closing, summarizes the monitoring programs, summarizes characterization studies and results, and then presents conclusions and recommendations.

  9. Please return to 2258 Engineering Hall upon requesting a Ph.D. Preliminary Exam Warrant. PhD Minor Requirements

    E-Print Network [OSTI]

    Wisconsin at Madison, University of

    Please return to 2258 Engineering Hall upon requesting a Ph.D. Preliminary Exam Warrant. PhD Minor Requirements The purpose of a minor is to give breadth and depth to the PhD program beyond the major area A or Option B to satisfy the PhD minor requirements. A PhD minor proposal form may be obtained from the CEE

  10. Plutonium Focus Area research and development plan. Revision 1

    SciTech Connect (OSTI)

    NONE

    1996-11-01T23:59:59.000Z

    The Department of Energy (DOE) committed to a research and development program to support the technology needs for converting and stabilizing its nuclear materials for safe storage. The R and D Plan addresses five of the six material categories from the 94-1 Implementation Plan: plutonium (Pu) solutions, plutonium metals and oxides, plutonium residues, highly enriched uranium, and special isotopes. R and D efforts related to spent nuclear fuel (SNF) stabilization were specifically excluded from this plan. This updated plan has narrowed the focus to more effectively target specific problem areas by incorporating results form trade studies. Specifically, the trade studies involved salt; ash; sand, slag, and crucible (SS and C); combustibles; and scrub alloy. The plan anticipates possible disposition paths for nuclear materials and identifies resulting research requirements. These requirements may change as disposition paths become more certain. Thus, this plan represents a snapshot of the current progress and will continue to be updated on a regular basis. The paper discusses progress in safeguards and security, plutonium stabilization, special isotopes stabilization, highly-enriched uranium stabilization--MSRE remediation project, storage technologies, engineered systems, core technology, and proposed DOE/Russian technology exchange projects.

  11. Delegations - DOE Directives, Delegations, and Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGas SeparationsRelevantDOEDelegations Current By Functional Area

  12. Parent Title Forestry Commission Objectives When is Equality Analysis Required?

    E-Print Network [OSTI]

    ­ EA Required? | Stephen Bennett | 09/09/2014 #12;FC Objectives ­ EA Required? Forestry Commission Required | Stephen Bennett | 09/09/2014 #12;FC Objectives ­ EA Required? Forestry Commission Cross Border are going to be encouraged and measured 3 | FC Objectives ­ EA Required | Stephen Bennett | 09/09/2014 #12

  13. K-Area and Par Pond Sewage Sludge Application Sites Groundwater Monitoring Report. First quarter 1993

    SciTech Connect (OSTI)

    Not Available

    1993-07-01T23:59:59.000Z

    Samples from the three wells at the K-Area Sewage Sludge Application Site (KSS wells) and the three wells at the Par Pond Sewage Sludge Application Site (PSS wells) are analyzed quarterly for constituents required by South Carolina Department of Health and Environmental Control Construction Permit 13,173 and, as requested, for other constituents as part of the Savannah River Site Groundwater Monitoring Program. Annual analyses for other constituents, primarily metals, also are required by the permit. During first quarter 1993, no permit-required constituents exceeded standards at the two sites except iron, which was elevated in one KSS well and two PSS wells. Aluminum, not required by the permit, was the only other constituent that exceeded standards. Elevated levels of aluminum and iron at these two sites may be concurrent with a change in analytical methodology. As in previous quarters, chlordane concentrations did not exceed the detection limit in any of the wells.

  14. Comparison of the NRC and the IAEA regulatory documents in the area of nuclear fuel systems

    SciTech Connect (OSTI)

    El-Adham, K.; Shinaishin, M.A.

    1991-04-01T23:59:59.000Z

    A main objective of this work was to identify the safety requirements in the area of fuel system design and performance from both the International Atomic Energy Agency (IAEA) and U.S. Nuclear Regulatory Commission (NRC) points of view. The study covered requirements during normal plant operation as well as during accident conditions. This study revealed that, although none of the factors to be considered for fuel safety were neglected in the IAEA regulatory documents, these documents are not complete in themselves, particularly because they lack quantitative guidelines and specific industrial standards. Although generality makes the IAEA requirements adaptable to many countries, on the other hand, it makes their applicability constrained by the availability of highly qualified and experienced personnel who can translate the qualitative requirements given in these documents into actual engineering solutions. 20 refs.

  15. Annex D-200 Area Interim Storage Area Final Safety Analysis Report [FSAR] [Section 1 & 2

    SciTech Connect (OSTI)

    CARRELL, R D

    2002-07-16T23:59:59.000Z

    The 200 Area Interim Storage Area (200 Area ISA) at the Hanford Site provides for the interim storage of non-defense reactor spent nuclear fuel (SNF) housed in aboveground dry cask storage systems. The 200 Area ISA is a relatively simple facility consisting of a boundary fence with gates, perimeter lighting, and concrete and gravel pads on which to place the dry storage casks. The fence supports safeguards and security and establishes a radiation protection buffer zone. The 200 Area ISA is nominally 200,000 ft{sup 2} and is located west of the Canister Storage Building (CSB). Interim storage at the 200 Area ISA is intended for a period of up to 40 years until the materials are shipped off-site to a disposal facility. This Final Safety Analysis Report (FSAR) does not address removal from storage or shipment from the 200 Area ISA. Three different SNF types contained in three different dry cask storage systems are to be stored at the 200 Area ISA, as follows: (1) Fast Flux Test Facility Fuel--Fifty-three interim storage casks (ISC), each holding a core component container (CCC), will be used to store the Fast Flux Test Facility (FFTF) SNF currently in the 400 Area. (2) Neutron Radiography Facility (NRF) TRIGA'--One Rad-Vault' container will store two DOT-6M3 containers and six NRF TRIGA casks currently stored in the 400 Area. (3) Commercial Light Water Reactor Fuel--Six International Standards Organization (ISO) containers, each holding a NAC-I cask4 with an inner commercial light water reactor (LWR) canister, will be used for commercial LWR SNF from the 300 Area. An aboveground dry cask storage location is necessary for the spent fuel because the current storage facilities are being shut down and deactivated. The spent fuel is being transferred to interim storage because there is no permanent repository storage currently available.

  16. On uniformly subelliptic operators and stochastic area

    E-Print Network [OSTI]

    2008-08-12T23:59:59.000Z

    Nov 27, 2007 ... area, which generalizes previous works of Lyons–Stoica and then ..... ?a;x. B(x0,r) = inf. { t ? 0 : X a;x t. /? B (x0,r). } ,. Pa;x. B(x0,r) (t, ·) = P.

  17. ICME & MGI Big Area Additive Manufacturing

    E-Print Network [OSTI]

    ICME & MGI · Big Area Additive Manufacturing · Neutron Characterization for AM · Materials problems in additive manu- facturing (AM). Additive manufacturing, or three-dimensional (3-D) printing of the world's most advanced neu- tron facilities, the HFIR and SNS, to characterize additive manufactured

  18. Cod. Fisc. 90031700322 AREA Science Park

    E-Print Network [OSTI]

    Cod. Fisc. 90031700322 AREA Science Park Padriciano 99 34149 Trieste, ITALY Tel: +39-040-37571 Fax Trieste and champion of the Trieste Science System Paolo Budinich, co-founder of the Abdus Salam International Centre for Theoretical Physics in Trieste, passed away on 14 November 2013. For over 50 years one

  19. West Central North East Area of Tucson

    E-Print Network [OSTI]

    Hall, Sharon J.

    a, b) in urbanized areas. The Tucson Hummingbird Project (THP) is a citizen-science, reconciliation for migrating ones. Citizen Science and OutreachCitizen Science and Outreach The latter was achieved with citizen scientists via large-scale outreach to the local community. Projects such as the THP can

  20. USACE Small Business Area of Responsibility

    E-Print Network [OSTI]

    US Army Corps of Engineers

    ACE Page 1 USACE Small Business Area of Responsibility OFC CODE STREET CITY ST ZIP TELEPHONE D S N-761-4609 Deputy to PARCs , Office of Small Business Prog, HQ U.S. Army Corps of CESB 60 Forsyth Street RM10M15