Powered by Deep Web Technologies
Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

CX-008651: Categorical Exclusion Determination | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1: Categorical Exclusion Determination 1: Categorical Exclusion Determination CX-008651: Categorical Exclusion Determination Dismantle and Remove (D&R) and Replace 773-A D-Wing Air Handling and Condensing Units CX(s) Applied: B1.3 Date: 05/17/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office Replace 773-A D-Wing Roof Air handing unit A-773000-HVAC-AHU-819-512, Condenser A-773000-HVAC-CDU-819-515. The system return ducting has an in line booster fan, A-773000-HVAC-FAN-819-502, that is out of service and no longer needed. W/O 1175556 will recover the R-22 refrigerant and remove and dispose of the condenser compressor's oil. CX-008651.pdf More Documents & Publications CX-008352: Categorical Exclusion Determination CX-010133: Categorical Exclusion Determination CX-008358

2

Radiation Source Replacement Workshop  

Science Conference Proceedings (OSTI)

This report summarizes a Radiation Source Replacement Workshop in Houston Texas on October 27-28, 2010, which provided a forum for industry and researchers to exchange information and to discuss the issues relating to replacement of AmBe, and potentially other isotope sources used in well logging.

Griffin, Jeffrey W.; Moran, Traci L.; Bond, Leonard J.

2010-12-01T23:59:59.000Z

3

Video face replacement  

E-Print Network (OSTI)

We present a method for replacing facial performances in video. Our approach accounts for differences in identity, visual appearance, speech, and timing between source and target videos. Unlike prior work, it does not ...

Dale, Kevin

4

First SNS Target Replacement  

E-Print Network (OSTI)

· Replacement of the target module was accomplished using only remote handling tooling and procedures (hands operations. Remote Handling Control Room Manipulator Gallery #12;10 Managed by UT-Battelle for the U ­ Interim process fitting leak testing ­ Limitations on remote handling equipment reliability ­ Limitations

McDonald, Kirk

5

ARRANGEMENT FOR REPLACING FILTERS  

DOE Patents (OSTI)

An improved filtered air exhaust system which may be continually operated during the replacement of the filters without the escape of unfiltered air is described. This is accomplished by hermetically sealing the box like filter containers in a rectangular tunnel with neoprene covered sponge rubber sealing rings coated with a silicone impregnated pneumatic grease. The tunnel through which the filters are pushed is normal to the exhaust air duct. A number of unused filters are in line behind the filters in use, and are moved by a hydraulic ram so that a fresh filter is positioned in the air duct. The used filter is pushed into a waiting receptacle and is suitably disposed. This device permits a rapid and safe replacement of a radiation contaminated filter without interruption to the normal flow of exhaust air.

Blomgren, R.A.; Bohlin, N.J.C.

1957-08-27T23:59:59.000Z

6

Steam generator replacement overview  

Science Conference Proceedings (OSTI)

Since nuclear power began to be widely used for commercial purposes in the 1960s, unit operators have experienced a variety of problems with major components. Although many of the problems have diminished considerably, those associated with pressurized water reactor (PWR) steam generators persist. Steam generator problems rank second, behind refueling outages, as the most significant contributor to lost electricity generation. As of December 31, 1995, 38 steam generators had been replaced in 13 of the 72 operating PWRs, and three units had been shut down prematurely, due primarily (or partially) to degradation of their steam generators: Portland General Electric`s Trojan unit, located in Prescott, OR, in 1992; Southern California Edison`s San Onofre 1, located in San Clemente, CA, in 1992; and Sacramento Municipal Utility District`s Rancho Seco unit in 1989. In the coming years, operators of PWRs in the US with degraded steam generators will have to decide whether to make annual repairs (with eventual derating likely), replace the generators or shut the plants down prematurely. To understand the issues and decisions utility managers face, this article examines problems encountered at steam generators over the past few decades and identifies some of the remedies that utility operators and the nuclear community have employed, including operational changes, maintenance, repairs and steam generator replacement.

Chernoff, H. [Science Applications International Corp., McLean, VA (United States); Wade, K.C. [USDOE Energy Information Administration, Washington, DC (United States)

1996-01-01T23:59:59.000Z

7

Guidelines for Intelligent Asset Replacement  

Science Conference Proceedings (OSTI)

EPRI8217s asset management research focuses on developing a rational basis for selecting repair or replacement options for specific classes of equipment by balancing the risks of equipment failure against the costs of continued maintenance or capital replacement. This report, the fourth report on guidelines for asset replacement, discusses methods for making decisions about wood poles. It significantly enhances a prior report on this subject by explicitly modeling pole degradation, inspection and test ef...

2006-12-18T23:59:59.000Z

8

HALON REPLACEMENT RESEARCH - A HISTORICAL ...  

Science Conference Proceedings (OSTI)

... Tapscott, RE, Progress Report on Alternatives and Replacements for Halons, E&P Forum Halon Phase-Out Workshop, London, United Kingdom ...

2011-10-11T23:59:59.000Z

9

Energy efficiency and appliance replacement  

E-Print Network (OSTI)

1004 ENERGY EFFICIENCY AND APPLIANCE REPLACEMENT Jeffrey T.adopt energy efficient appliances, even though the financialmix of energyusing appliances predicts that under plausible

LaFrance, Jeffrey T.

2005-01-01T23:59:59.000Z

10

Replace Kilogram Standard? NIST Weighs Options  

Science Conference Proceedings (OSTI)

... Replace Kilogram Standard? ... For some time, scientists have considered replacing the kilogram mass standard with a natural constant. ...

11

Wafer Replacement Cluster Tool (Presentation);  

DOE Green Energy (OSTI)

This presentation on wafer replacement cluster tool discusses: (1) Platform for advanced R and D toward SAI 2015 cost goal--crystal silicon PV at area costs closer to amorphous Si PV, it's 15% efficiency, inexpensive substrate, and moderate temperature processing (<800 C); (2) Why silicon?--industrial and knowledge base, abundant and environmentally benign, market acceptance, and good efficiency; and (3) Why replace wafers?--expensive, high embedded energy content, and uses 50-100 times more silicon than needed.

Branz, H. M.

2008-04-01T23:59:59.000Z

12

Testing of Replacement Bag Material  

Science Conference Proceedings (OSTI)

Recently, the FB-Line bagout material was changed to simplify the processing of sand, slag, and crucible.The results of the strength tests and the outgassing measurements and calculations demonstrate that the proposed replacement nylon bag materials (HRMP and orange anti-static material) are acceptable substitutes for LDPE and the original nylon with respect to mechanical properties.

Laurinat, J.E.

1998-11-03T23:59:59.000Z

13

Sampling streaming data with replacement  

Science Conference Proceedings (OSTI)

Simple random sampling is a widely accepted basis for estimation from a population. When data come as a stream, the total population size continuously grows and only one pass through the data is possible. Reservoir sampling is a method of maintaining ... Keywords: Data stream mining, Random sampling with replacement, Reservoir sampling

Byung-Hoon Park; George Ostrouchov; Nagiza F. Samatova

2007-10-01T23:59:59.000Z

14

Replacement element for automobile thermostat  

Science Conference Proceedings (OSTI)

This patent describes a thermostat replacement element for use in a cooling system in which a continuous stream of coolant normally flows from a radiator through a thermostat to an engine. The thermostat is mounted within a mounting cavity and permits maximum flow of coolant through the cooling system when in an open position. The replacement element comprises a disc-shaped member having a diameter substantially corresponding to the diameter of the mounting cavity. The member is provided with apertures of a predetermined size to permit flow of coolant therethrough at a rate generally corresponding to the rate of flow of coolant through the thermostat when the thermostat is in an open position.

Ferrari, W.

1988-06-07T23:59:59.000Z

15

B Plant process piping replacement feasibility study  

SciTech Connect

Reports on the feasibility of replacing existing embedded process piping with new more corrosion resistant piping between cells and between cells and a hot pipe trench of a Hanford Site style canyon facility. Provides concepts for replacement piping installation, and use of robotics to replace the use of the canyon crane as the primary means of performing/supporting facility modifications (eg, cell lining, pipe replacement, equipment reinstallation) and operational maintenenace.

Howden, G.F.

1996-02-07T23:59:59.000Z

16

Categorical Exclusion Determinations: Savannah River Operations Office |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 29, 2012 November 29, 2012 CX-009607: Categorical Exclusion Determination 772-F Low-Activity Drain (LAD) Discharge Header Modification CX(s) Applied: B1.3 Date: 11/29/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office November 29, 2012 CX-008651: Categorical Exclusion Determination Dismantle and Remove (D&R) and Replace 773-A D-Wing Air Handling and Condensing Units CX(s) Applied: B1.3 Date: 05/17/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office November 29, 2012 CX-009608: Categorical Exclusion Determination Refurbish 607-53C Sanitary Sewer Lift Station CX(s) Applied: B1.3 Date: 11/29/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office November 27, 2012 CX-009611: Categorical Exclusion Determination

17

Replacing Fluorescent Lightbulbs | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Replacing Fluorescent Lightbulbs Replacing Fluorescent Lightbulbs Replacing Fluorescent Lightbulbs July 29, 2012 - 6:37pm Addthis Although fluorescent lightbulbs are generally energy efficient, you can replace them with new, even more efficient bulbs that use better electrodes and coatings than older ones. | Photo courtesy of ©iStockphoto.com/JoLin. Although fluorescent lightbulbs are generally energy efficient, you can replace them with new, even more efficient bulbs that use better electrodes and coatings than older ones. | Photo courtesy of ©iStockphoto.com/JoLin. What does this mean for me? Today's fluorescent light fixtures and bulbs are far more efficient than older ones. You can replace fluorescent bulbs and ballasts with more efficient ones to save money and energy. All fluorescent bulbs contain a very small amount of mercury:

18

Chemistry and Metallurgy Research Replacement - Nuclear Facility...  

National Nuclear Security Administration (NNSA)

Chemistry and Metallurgy Research Replacement - Nuclear Facility (CMRR-NF SEIS) | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing...

19

Replacement solvents for use in chemical synthesis  

DOE Patents (OSTI)

Replacement solvents for use in chemical synthesis include polymer-immobilized solvents having a flexible polymer backbone and a plurality of pendant groups attached onto the polymer backbone, the pendant groups comprising a flexible linking unit bound to the polymer backbone and to a terminal solvating moiety. The polymer-immobilized solvent may be dissolved in a benign medium. Replacement solvents for chemical reactions for which tetrahydrofuran or diethyl may be a solvent include substituted tetrahydrofurfuryl ethers and substituted tetrahydro-3-furan ethers. The replacement solvents may be readily recovered from the reaction train using conventional methods.

Molnar, Linda K. (Philadelphia, PA); Hatton, T. Alan (Sudbury, MA); Buchwald, Stephen L. (Newton, MA)

2001-05-15T23:59:59.000Z

20

Conceptual Design Plan SM-43 Replacement Project  

SciTech Connect

The Los Alamos National Laboratory Conceptual Design Plan for the SM-43 Replacement Project outlines plans for replacing the SM-43 Administration Building. Topics include the reasons that replacement is considered a necessity; the roles of the various project sponsors; and descriptions of the proposed site and facilities. Also covered in this proposal is preliminary information on the project schedule, cost estimates, acquisition strategy, risk assessment, NEPA strategy, safety strategy, and safeguards and security. Spreadsheets provide further detail on space requirements, project schedules, and cost estimates.

University of California, Los Alamos National Laboratory, SCC Project Office

2000-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Information Resources: LED Replacement Lamps: Current Performance...  

NLE Websites -- All DOE Office Websites (Extended Search)

incandescent lamps (e.g., A-lamps), and provided an update on ENERGY STAR criteria for LED integral replacement lamps - currently in its second draft. Robert Lingard of Pacific...

22

Marin County- Wood Stove Replacement Rebate Program  

Energy.gov (U.S. Department of Energy (DOE))

The County of Marin has created a rebate program to encourage homeowners to remove or replace non-EPA certified wood-burning heaters (wood stoves and fireplace inserts) with cleaner burning stoves...

23

A replaceable reflective film for solar concentrators  

DOE Green Energy (OSTI)

The 3M Company manufactures a silvered acrylic film called ECP-305 that is regarded as the preferred reflective film for use on stretched-membrane heliostats. However, ECP-305 will degrade in time, due to both corrosion of the silver layer and delamination at the film's silver-to-acrylic interface, and will eventually need to be replaced. 3M uses a very aggressive adhesive on this film, and once it is laminated, replacement is very difficult. The purpose of this investigation was the development of a replaceable reflector, a reflective film that can be easily removed and replaced. A replaceable reflector was successfully configured by laminating ECP-305 to the top surface of a smooth, dimensionally stable polymer film, with a removable adhesive applied to the underside of the polymer film. Several stages of screening and testing led to the selection of a 0.010-inch thick polycarbonate (GE 8030) as the best polymer film and a medium tack tape (3M Y-9425) was selected as the best removable adhesive. To demonstrate the feasibility of the replaceable reflector concept and to provide a real-time field test, the chosen construction was successfully applied to the 50-m{sup 2} SKI heliostat at the Central Receiver Test Facility at Sandia National Laboratories in Albuquerque. 4 refs., 13 figs., 7 tabs.

Not Available

1991-09-01T23:59:59.000Z

24

U.S. Department of Energy Categorical Exclusion ...  

NLE Websites -- All DOE Office Websites (Extended Search)

Replace Air Supply Unit (EN-773A-812-500) with HVAC-AHU-E16, Bldg 773-A, Sec. E NW Lower Roof Savannah River Site AikenAikenSouth Carolina Supply Air Handling Unit (AHU)...

25

Steam Plant Replaces Outdated Coal-Fired System | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Steam Plant Replaces Outdated Coal-Fired System Steam Plant Replaces Outdated Coal-Fired System September 1, 2012 - 12:00pm Addthis A new natural gas-fired steam plant will replace...

26

Replacement of charcoal sorbent in the VOST  

SciTech Connect

EPA Method 0030, the Volatile Organic Sampling Train (VOST), for sampling volatile organics from stationary sources, specifies the use of petroleum-base charcoal in the second sorbent tube. Charcoal has proven to be a marginal performer as a sampling sorbent, partly due to inconsistency in analyte recovery. In addition, commercial availability of petroleum charcoal for VOST tubes has been variable. Lack of data on comparability and variability of charcoals for VOST application has created uncertainty when other charcoals are substituted. Five potential sorbent replacements for charcoal in Method 0030 were evaluated along with a reference charcoal. Two of the sorbents tested, Ambersorb XE-340 and Tenax GR, did not perform well enough to qualify as replacements. Three candidates, Anasorb 747, Carbosieve S-III and Kureha Beaded Activated Charcoal, performed adequately, and produced statistically equivalent results. Anasorb 747 appears to be an acceptable replacement for petroleum charcoal, based on a combination of performance, availability, and cost.

Johnson, L.D.; Fuerst, R.G.; Foster, A.L.; Bursey, J.T.

1993-01-01T23:59:59.000Z

27

Alternative Fuels Data Center: Alternative Fuel Vehicle Replacement Grants  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Alternative Fuel Alternative Fuel Vehicle Replacement Grants to someone by E-mail Share Alternative Fuels Data Center: Alternative Fuel Vehicle Replacement Grants on Facebook Tweet about Alternative Fuels Data Center: Alternative Fuel Vehicle Replacement Grants on Twitter Bookmark Alternative Fuels Data Center: Alternative Fuel Vehicle Replacement Grants on Google Bookmark Alternative Fuels Data Center: Alternative Fuel Vehicle Replacement Grants on Delicious Rank Alternative Fuels Data Center: Alternative Fuel Vehicle Replacement Grants on Digg Find More places to share Alternative Fuels Data Center: Alternative Fuel Vehicle Replacement Grants on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Alternative Fuel Vehicle Replacement Grants

28

Measure Guideline: Window Repair, Rehabilitation, and Replacement  

SciTech Connect

This measure guideline provides information and guidance on rehabilitating, retrofitting, and replacing existing window assemblies in residential construction. The intent is to provide information regarding means and methods to improve the energy and comfort performance of existing wood window assemblies in a way that takes into consideration component durability, in-service operation, and long term performance of the strategies.

Baker, P.

2012-12-01T23:59:59.000Z

29

Energy Efficient Buffer Cache Replacement Jianhui Yue  

E-Print Network (OSTI)

back to the active state. The transition from a lower power state to a higher one re- quires some significantly increases the en- ergy saving opportunities through DAM overlapping and power state transition replacement algorithms only aim to optimize cache hit rates and do not consider the power status of memory

Zhu, Yifeng

30

HVAC equipment replacement for best size and efficiency  

DOE Green Energy (OSTI)

The purpose of this project was to explore the potential benefits of HVAC equipment replacement for buildings owned by the City of Phoenix. The specific research objectives were as follows: Establishment an understanding of the magnitude and sources of saving available through equipment replacement; Establish an economic model for understanding equipment replacement and deciding when equipment should be replaced; Establish technical methods for calculating savings from replacement of various types of equipment; Demonstrate the replacement of a major item of HVAC equipment and document the savings through actual experimentation and measurement; and Provide guidance material for other jurisdictions wishing to investigate equipment replacement. 11 figs., 9 tabs.

Teji, D.S.

1988-02-01T23:59:59.000Z

31

Baseline vs. Replacement High Bay Lighting Evaluation  

Science Conference Proceedings (OSTI)

Energy efficient lighting has been a means to significant energy savings for many facilities around the world. New developments in fluorescent, induction, LED (light-emitting diode), and plasma lighting technologies have spurred various building managers to replace or retrofit existing lighting fixtures. These advances in lighting sources often allow conservation of electricity, better quality of light, and more flexibility in the control of light. However, these new lighting sources still have ...

2013-11-06T23:59:59.000Z

32

Microsoft Word - B-8.Replacement-3.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

United States Department of Energy Southeastern Power Administration Wholesale Rate Schedule Replacement-3 Availability: This rate schedule shall be available to public bodies and cooperatives ( any one of whom is hereinafter called the Customer) in Virginia, North Carolina, Tennessee, Georgia, Alabama, Mississippi, Kentucky and southern Illinois to whom power is provided pursuant to contracts between the Government and the customer from the Dale Hollow, Center Hill, Wolf Creek, Cheatham, Old Hickory, Barkley, J. Percy Priest, Cordell Hull, and Laurel Projects (all of such projects being hereinafter called collectively the "Cumberland Projects") . Applicability: This rate schedule shall be applicable to the sale of wholesale energy purchased to

33

Alternative Fuels Data Center: Clean Vehicle Replacement Vouchers  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Vehicle Vehicle Replacement Vouchers to someone by E-mail Share Alternative Fuels Data Center: Clean Vehicle Replacement Vouchers on Facebook Tweet about Alternative Fuels Data Center: Clean Vehicle Replacement Vouchers on Twitter Bookmark Alternative Fuels Data Center: Clean Vehicle Replacement Vouchers on Google Bookmark Alternative Fuels Data Center: Clean Vehicle Replacement Vouchers on Delicious Rank Alternative Fuels Data Center: Clean Vehicle Replacement Vouchers on Digg Find More places to share Alternative Fuels Data Center: Clean Vehicle Replacement Vouchers on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Clean Vehicle Replacement Vouchers The Texas Commission on Environmental Quality administers the AirCheckTexas

34

Solid-State Lighting: Text-Alternative Version: LED Replacements...  

NLE Websites -- All DOE Office Websites (Extended Search)

Text-Alternative Version: LED Replacements for Linear Fluorescent Lamps to someone by E-mail Share Solid-State Lighting: Text-Alternative Version: LED Replacements for Linear...

35

Solid-State Lighting: LED Replacements for Linear Fluorescent...  

NLE Websites -- All DOE Office Websites (Extended Search)

LED Replacements for Linear Fluorescent Lamps Webcast to someone by E-mail Share Solid-State Lighting: LED Replacements for Linear Fluorescent Lamps Webcast on Facebook Tweet about...

36

Replacement solvents for use in chemical synthesis - Energy ...  

The replacement solvents may be readily recovered from the reaction train using conventional methods. Inventors: Molnar; Linda K. (Philadelphia, PA), ...

37

Replaces EIA-459E OMB Control No.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5 5 (04-94) Replaces EIA-459E OMB Control No. 1910-0400 U.S. DEPARTMENT OF ENERGY FEDERAL ASSISTANCE MANAGEMENT SUMMARY REPORT Page of Public reporting burden for this collection of information is estimated to average 3.38 hours per response, including the time for reviewing instructions, search- ing existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Office of Information Resources Management Policy, Plans, and Oversight, Records Management Division, HR-422 - GTN, Paperwork Reduction Project (1910-0400), U.S. Department of Energy, 1000 Independence Avenue, S.W., Washington, DC 20585; and to the Office of Management and Budget (OMB), Paperwork Reduction Project

38

Replaces DOE F 5120.2  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

700.2 700.2 (09-93) Replaces DOE F 5120.2 (02-90) edition may be used 1. INITIATOR: NAME & SIGNATURE ORGANIZATION CODE TELEPHONE NO. 2. PROJECT TITLE: 3. RESPONSIBLE ASSISTANT SECRETARY: 4. RESPONSIBLE OPERATIONS OFFICE: 5. M&O CONTRACTOR NAME: 6. WORK AUTHORIZATION NO.: FUNDS HEREBY AUTHORIZED 7. REVISION: B&R No. $000 13. WORK AUTHORIZED: (Brief description, schedule, results or products and reporting requirements, and any shifting of funds permitted within the work authorization): U.S. DEPARTMENT OF ENERGY Management & Operating (M&O) Contract Work Authorization WORK AUTHORIZATION 14. WORK AUTHORIZATION OFFICIAL: 15. OPERATIONS OFFICE OFFICIAL: 16. M&O CONTRACTOR OFFICIAL: NAME & SIGNATURE DATE 9. PERFORMANCE PERIOD COVERED BY

39

Do You Have Windows That Need Replacing? | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Do You Have Windows That Need Replacing? Do You Have Windows That Need Replacing? Do You Have Windows That Need Replacing? August 3, 2012 - 2:11pm Addthis This week, Andrea shared the first part of her two-part story about how she replaced her more than 20-year-old windows with new, energy-efficient ones. Replacing old windows can be a great way to reduce the amount of warm and cool air (depending on the season) is leaking right out of your home. This week, we're wondering: Do you have windows that need replacing, too? Do you have any plans to replace them with newer, more efficient windows? You have the chance to share your thoughts on a question about energy efficiency or renewable energy for consumers. E-mail your responses to the Energy Saver team at consumer.webmaster@nrel.gov. Addthis Related Articles

40

Replacing Incandescent Lightbulbs and Ballasts | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Replacing Incandescent Lightbulbs and Ballasts Replacing Incandescent Lightbulbs and Ballasts Replacing Incandescent Lightbulbs and Ballasts July 29, 2012 - 5:16pm Addthis Many incandescent lightbulbs can be replaced with more energy efficient options. | Photo courtesy of ©iStockphoto.com/ClarkandCompany. Many incandescent lightbulbs can be replaced with more energy efficient options. | Photo courtesy of ©iStockphoto.com/ClarkandCompany. What does this mean for me? For the greatest energy efficiency, use new fixtures with new lightbulbs. Replace A-type lightbulbs with more energy-efficient options such as CFLs, LEDs, and energy-saving (halogen) incandescents. Matching replacement lightbulbs to existing fixtures and ballasts can be tricky, especially with older fixtures. Using new fixtures made for new

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

CX-006632: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

773-A, C-001 Roof Replacement Date: 08/02/2011Location(s): Aiken, South CarolinaOffice(s): Savannah River Operations Office

42

Alternatives to proposed replacement production reactors  

SciTech Connect

To insure adequate supplies of plutonium and tritium for defense purposes, an independent evaluation was made by Los Alamos National Laboratory of the numerous alternatives to the proposed replacement production reactors (RPR). This effort concentrated on the defense fuel cycle operation and its technical implications in identifying the principal alternatives for the 1990s. The primary options were identified as (1) existing commercial reactors, (2) existing and planned government-owned facilities (not now used for defense materials production), and (3) other RPRs (not yet proposed) such as CANDU or CANDU-type heavy-water reactors (HWR) for both plutonium and tritium production. The evaluation considered features and differences of various options that could influence choice of RPR alternatives. Barring a change in the US approach to civilian and defense fuel cycles and precluding existing commercial reactors at government-owned sites, the most significant alternatives were identified as a CANDU-type HWR at Savannah River Plant (SRP) site or the Three Mile Island commercial reactor with reprocessing capability at Barnwell Nuclear Fuel Plant and at SRP.

Cullingford, H.S.

1981-06-01T23:59:59.000Z

43

Control console replacement at the WPI Reactor  

SciTech Connect

With partial funding from the Department of Energy (DOE) University Reactor Instrumentation Upgrade Program (DOE Grant No. DE-FG02-90ER12982), the original control console at the Worcester Polytechnic Institute (WPI) Reactor has been replaced with a modern system. The new console maintains the original design bases and functionality while utilizing current technology. An advanced remote monitoring system has been added to augment the educational capabilities of the reactor. Designed and built by General Electric in 1959, the open pool nuclear training reactor at WPI was one of the first such facilities in the nation located on a university campus. Devoted to undergraduate use, the reactor and its related facilities have been since used to train two generations of nuclear engineers and scientists for the nuclear industry. The reactor power level was upgraded from 1 to 10 kill in 1969, and its operating license was renewed for 20 years in 1983. In 1988, the reactor was converted to low enriched uranium. The low power output of the reactor and ergonomic facility design make it an ideal tool for undergraduate nuclear engineering education and other training.

1992-01-01T23:59:59.000Z

44

Polymers replace glass in Nova fuel capsules  

SciTech Connect

The glass fuel-capsule designs used in previous laser-fusion research are not adaptable to the implosion-physics requirements of Nova and other more powerful laser facilities that may be available in the future. As one tries to learn more about the physics of high-density compression, it becomes increasingly important to replace the glass with lower-Z material. Accordingly, the authors have shut down the high-temperature drop-tower furnaces they used to make glass capsules, and they are focusing all their efforts on developing new techniques for making polymer capsules. These capsules are ten times larger in diameter than the glass capsules used in the early days of laser-fusion research, but they are still only one-tenth as large as a high-gain capsule must be. The polymer capsules will be used in classified indirect-drive targets. This article describes how the decisions were made on which polymers to use in the NOVA fuel capsules, the techniques explored, and the properties of the prototype capsules.

Burnham, A.K.

1986-01-01T23:59:59.000Z

45

Replacement-1 Wholesale Power Rate Schedule | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Replacement-1 Wholesale Power Rate Schedule Replacement-1 Wholesale Power Rate Schedule Replacement-1 Wholesale Power Rate Schedule Area: Replacement Energy System: Georgia-Alabama-South Carolina This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in Georgia, Alabama, Mississippi, Florida, South Carolina, or North Carolina to whom power is provided pursuant to contracts between the Government and the Customer. This rate schedule shall be applicable to the sale at wholesale energy purchased to meet contract minimum energy and sold under appropriate contracts between the Government and the Customer. Document Available for Download Replacement-1 Rate Schedule More Documents & Publications Replacement-3 Wholesale Power Rate Schedule

46

Bio-based ethylene able to replace petroleum as a ...  

Biomass and Biofuels Bio-based ethylene able to replace petroleum as a feedstock National Renewable Energy Laboratory. Contact NREL About This ...

47

Replace Kilogram Artifact Now With Definition Based on ...  

Science Conference Proceedings (OSTI)

Replace Kilogram Artifact Now With Definition Based on Nature, Experts Say. ... This started out as a study of the effects of redefining the kilogram. ...

2010-10-05T23:59:59.000Z

48

Solid Oxide Fuel Cells (SOFC) as Military APU Replacements  

NLE Websites -- All DOE Office Websites (Extended Search)

Division Propulsion Directorate Air Force Research Laboratory Solid Oxide Fuel Cells (SOFC) as Military APU Replacements Cleared For Public For Public Release: 88ABW-2010-0196 2...

49

Conveyorized Photoresist Stripping Replacement for Flex Circuit Fabrication  

SciTech Connect

A replacement conveyorized photoresist stripping system was characterized to replace the ASI photoresist stripping system. This system uses the qualified ADF-25c chemistry for the fabrication of flex circuits, while the ASI uses the qualified potassium hydroxide chemistry. The stripping process removes photoresist, which is used to protect the copper traces being formed during the etch process.

Megan Donahue

2009-02-24T23:59:59.000Z

50

Building 773-A, Lab F003 Glovebox Project Radiological Design Summary Report  

SciTech Connect

Engineering Standards present the radiological design criteria and requirements, which must be satisfied for all SRS facility designs. The radiological design criteria and requirements specified in the standard are based on the Code of Federal Regulations, DOE Orders, Site manuals, other applicable standards, and various DOE guides and handbooks. This report contains top-level requirements for the various areas of radiological protection for workers. For the purposes of demonstrating compliance with these requirements, the designer must examine the requirement for the design and either incorporate or provide a technical justification as to why the requirement is not incorporated. This document reports a radiological design review for the STREAK lab glovebox upgrades of inlet ventilation, additional mechanical and electrical services, new glovebox instrumentation and alarms. This report demonstrates that the gloveboxes meet the radiological design requirements of Engineering Standards.

Gaul, W.C.

2003-11-13T23:59:59.000Z

51

Replacing Incandescent Lightbulbs and Ballasts | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Incandescent Lightbulbs and Ballasts Incandescent Lightbulbs and Ballasts Replacing Incandescent Lightbulbs and Ballasts July 29, 2012 - 5:16pm Addthis Many incandescent lightbulbs can be replaced with more energy efficient options. | Photo courtesy of ©iStockphoto.com/ClarkandCompany. Many incandescent lightbulbs can be replaced with more energy efficient options. | Photo courtesy of ©iStockphoto.com/ClarkandCompany. What does this mean for me? For the greatest energy efficiency, use new fixtures with new lightbulbs. Replace A-type lightbulbs with more energy-efficient options such as CFLs, LEDs, and energy-saving (halogen) incandescents. Matching replacement lightbulbs to existing fixtures and ballasts can be tricky, especially with older fixtures. Using new fixtures made for new lightbulbs gives you the greatest energy savings, reliability, and

52

Energy Replacement Generation Tax Exemption | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Replacement Generation Tax Exemption Replacement Generation Tax Exemption Energy Replacement Generation Tax Exemption < Back Eligibility Commercial Industrial Local Government Residential Savings Category Water Buying & Making Electricity Bioenergy Wind Maximum Rebate None Program Info Start Date 01/01/2008 (retroactively effective) State Iowa Program Type Corporate Exemption Rebate Amount 100% exemption for self-generators, landfill gas and wind Reduced rate for large hydro Provider Iowa Department of Revenue Iowa imposes a replacement generation tax of 0.06 cents ($0.0006) per kilowatt-hour (kWh) on various forms of electricity generated within the state. This tax is imposed in lieu of a property tax on generation facilities. Under the Energy Replacement Generation Tax Exemption, the following

53

Electrical Equipment Replacement: Energy Efficiency versus System Compatibility  

E-Print Network (OSTI)

Electrical equipment components are replaced every day because of failure, obsolescence, or upgrade. Because of technological gains, replacement components are typically more energy efficient than older equipment. Life cycle cost analyses encourage end users to select the most energy efficient equipment when replacing motors, motor drives, transformers, lamps, ballasts, etc., given costs associated with energy consumption when compared with installation. The selection of replacement parts that are compatible with existing system components and loads is critical. The purpose of this paper is to discuss fundamental electrical design principles often overlooked when replacing existing equipment with energy efficient models. NOTE: The views expressed in this paper are those of the author and do not necessarily reflect the views of the United States of America, the U. S. Department of Justice, or the Federal Bureau of Prisons.

Massey, G. W.

2005-01-01T23:59:59.000Z

54

Water Monitoring Flume Replaced at the Rocky Flats, Colorado, Site |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Water Monitoring Flume Replaced at the Rocky Flats, Colorado, Site Water Monitoring Flume Replaced at the Rocky Flats, Colorado, Site Water Monitoring Flume Replaced at the Rocky Flats, Colorado, Site October 22, 2013 - 11:01am Addthis What does this project do? Goal 1. Protect human health and the environment In August of this year the U.S. Department of Energy (DOE) Office of Legacy Management (LM) Rocky Flats, site took advantage of an existing water diversion structure that was no longer needed, to replace an aging water monitoring flume and avoid future repairs that could interrupt data collection. The flume for Rocky Flats Legacy Management Agreement (RFLMA) Point of Evaluation (POE) monitoring location GS10 in South Walnut Creek was located at the bottom of fairly steep channel banks. The bank on the south side shows localized slumping and sliding toward the creek and GS10. Although

55

NREL: Energy Sciences - Marine Corps Taps NREL to Help Replace...  

NLE Websites -- All DOE Office Websites (Extended Search)

Science News Events Printable Version Marine Corps Taps NREL to Help Replace Aging Steam Plant with Efficient Biomass Cogeneration January 30, 2013

The 1940s central steam...

56

EA-0923: Winnett School District Boiler Replacement Project, Winnett, Montana  

Energy.gov (U.S. Department of Energy (DOE))

This EA evaluates the environmental impacts of the proposal to replace the Winnett School District complex's existing oil-fired heating system with a new coal-fired heating system with funds...

57

Laboratory Evaluation of LED T8 Replacement Lamp Products  

Science Conference Proceedings (OSTI)

A report on a lab setting analysis involving LED lamps intended to directly replace T8 fluorescent lamps (4') showing light output, power, and economic comparisons with other fluorescent options.

Richman, Eric E.; Kinzey, Bruce R.; Miller, Naomi J.

2011-05-23T23:59:59.000Z

58

A cache-partitioning aware replacement policy for chip multiprocessors  

Science Conference Proceedings (OSTI)

Chip multiprocessors (CMPs) usually employ shared, last-level caches to use on-chip memory resources effectively. Unfortunately, conventional replacement policies applied to shared caches fail to partition memory resources among cores to achieve an optimal ...

Haakon Dybdahl; Per Stenstrm; Lasse Natvig

2006-12-01T23:59:59.000Z

59

Intensity and Structure Changes during Hurricane Eyewall Replacement Cycles  

Science Conference Proceedings (OSTI)

A flight-level aircraft dataset consisting of 79 Atlantic basin hurricanes from 1977 to 2007 was used to develop an unprecedented climatology of inner-core intensity and structure changes associated with eyewall replacement cycles (ERCs). During ...

Matthew Sitkowski; James P. Kossin; Christopher M. Rozoff

2011-12-01T23:59:59.000Z

60

Mechanism of Concentric Eyewall Replacement Cycles and Associated Intensity Change  

Science Conference Proceedings (OSTI)

To understand the mechanisms responsible for the secondary eyewall replacement cycles and associated intensity changes in intense tropical cyclones (TCs), two numerical experiments are conducted in this study with the Weather Research and ...

Xiaqiong Zhou; Bin Wang

2011-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Replace Pressure-Reducing Valves with Backpressure Turbogenerators  

SciTech Connect

This revised ITP steam tip sheet on replacing pressure-reducing valves provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

Not Available

2006-01-01T23:59:59.000Z

62

Marin County - Wood Stove Replacement Rebate Program (California...  

Open Energy Info (EERE)

DSIRE1 Summary The County of Marin has created a rebate program to encourage homeowners to remove or replace non-EPA certified wood-burning heaters (wood stoves and...

63

Developing a total replacement cost index for suburban office projects  

E-Print Network (OSTI)

Understanding the components of replacement costs for office developments, and how these components combine to create total development costs is essential for success in office real estate development. Surprisingly, the ...

Hansen, David John, S.M. Massachusetts Institute of Technology

2006-01-01T23:59:59.000Z

64

Solid-State Lighting: Text-Alternative Version: LED Replacement...  

NLE Websites -- All DOE Office Websites (Extended Search)

I'd like to welcome everyone to this webcast on the very timely topic of light emitting diode replacement lamps and the latest on the ENERGY STAR programs efforts in this...

65

Drop-in replacement biofuels : meeting the challenge  

E-Print Network (OSTI)

This thesis presents a discussion on the challenges that must be met to fulfill the U.S. Navy's strategic imperatives for its energy vision. It provides an introduction to drop-in replacement biofuels, the options amongst ...

Bhargava, Alok (Alok Kishore)

2011-01-01T23:59:59.000Z

66

Remarks at the Capability Replacement Laboratory (CRL) Completion Ceremony  

NLE Websites -- All DOE Office Websites (Extended Search)

at the Capability Replacement Laboratory (CRL) Completion Ceremony at the Capability Replacement Laboratory (CRL) Completion Ceremony by Deputy Administrator Anne M. Harrington | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > Media Room > Speeches > Remarks at the Capability Replacement Laboratory (CRL) ... Speech Remarks at the Capability Replacement Laboratory (CRL) Completion Ceremony

67

EA-1178: 300 Area Steam Plant Replacement, Hanford Site, Richland,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

78: 300 Area Steam Plant Replacement, Hanford Site, Richland, 78: 300 Area Steam Plant Replacement, Hanford Site, Richland, Washington EA-1178: 300 Area Steam Plant Replacement, Hanford Site, Richland, Washington SUMMARY This EA evaluates the environmental impacts for a proposed energy conservation measure for a number of buildings in the 300 Area of the U.S. Department of Energy Hanford Site. The proposed action includes replacing the centralized heating system with heating units for individual buildings or groups of buildings, constructing new natural gas pipelines to provide a source for many of these units and constructing a central control building to operate and maintain the system. PUBLIC COMMENT OPPORTUNITIES None available at this time. DOCUMENTS AVAILABLE FOR DOWNLOAD March 12, 1997 EA-1178: Finding of No Significant Impact

68

Guidelines for Replacement Materials for Service Water Systems  

Science Conference Proceedings (OSTI)

Many power plants have ordered replacement materials for service water system components such as piping and heat exchanger tubing, only to find that the replacement materials do not perform as expected. Plant personnel who believed they were procuring like-for-like materials are at a loss as to why more modern materials, and components fabricated from more modern materials, can often provide inferior service, compared to original equipment. This report from the Electric Power Research Institute (EPRI) lo...

2012-08-10T23:59:59.000Z

69

A study of replacement rules for a parallel fleet replacement problem based on user preference utilization pattern and alternative fuel considerations  

Science Conference Proceedings (OSTI)

Parallel fleet replacement problems deal with determining an optimal replacement schedule that results in a minimal total cost of owning and operating a fleet within a finite planning horizon. In this paper, the fleet consists of service vehicles, varying ... Keywords: Alternative fuels, Parallel fleet replacement, Replacement rules, User preference utilization

Parthana Parthanadee; Jirachai Buddhakulsomsiri; Peerayuth Charnsethikul

2012-08-01T23:59:59.000Z

70

Cobalt discovery replaces precious metals as industrial catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

Cobalt Discovery Replaces Precious Metals Cobalt Discovery Replaces Precious Metals Cobalt discovery replaces precious metals as industrial catalyst Cobalt holds promise as an industrial catalyst with potential applications in such energy-related technologies such as production of biofuels and reduction of carbon dioxide. November 26, 2012 The artwork depicts the substitution of cobalt for precious metals in catalysis as a variation on the ancient alchemical theme of transmuting base metals into precious ones. The artwork depicts the substitution of cobalt for precious metals in catalysis as a variation on the ancient alchemical theme of transmuting base metals into precious ones. Contact Nancy Ambrosiano Communications Office (505) 699-1149 Email Catalysts are also integral to thousands of industrial, synthetic, and

71

Duct Chase Sprinkler Replacement Project (4594), 5/31/2012  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Duct Chase Sprinkler Replacement Project (4594) Duct Chase Sprinkler Replacement Project (4594) Program or Field Office: Y-12 Site Office Location(s) (Citv/County/State): Oak Ridge, Anderson County, Tennessee Proposed Action Description: The proposed action is provide replacement of corroded and aged sprinkler heads in the plenum duct chases. Categorical Exclusion(s) Applied: 81.3- Routine maintenance Submit by E-mail For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of I 0 CFR Part 1021. Regulatory Requirements in 10 CFR 1021.410(b): (See full text in regulation) [{Jrhe proposal fits within a class of actions that is listed in Appendix A orB to 10 CFR Part 1021, Subpart D.

72

Public Invited to Comment on Draft Environmental Assessment for Replacement  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Public Invited to Comment on Draft Environmental Assessment for Public Invited to Comment on Draft Environmental Assessment for Replacement Capability for Disposal of Remote-Handled Low Level Radioactive Waste Generated at the U.S. Department of Energy's Idaho Site Public Invited to Comment on Draft Environmental Assessment for Replacement Capability for Disposal of Remote-Handled Low Level Radioactive Waste Generated at the U.S. Department of Energy's Idaho Site September 1, 2011 - 12:00pm Addthis Media Contact Tim Jackson 208-526-8484 The U.S. Department of Energy invites the public to read and comment on a draft environmental assessment it has prepared, for a proposal to provide a replacement capability for continued disposal of remote-handled low-level radioactive waste that is generated at the Idaho National Laboratory site.

73

Replacement of Data from IHS With Those from HPDI  

U.S. Energy Information Administration (EIA) Indexed Site

Replacement of Data from IHS With Those from HPDI Replacement of Data from IHS With Those from HPDI The EIA-914 estimation methodology published in September 2005 used data from IHS, Inc., as a source for calibration of historical monthly production data. As of August 2006, these data have been replaced with data from HPDI, LLC. EIA does not have access to both the full IHS and the HPDI data for an overlap period sufficiently long to allow comprehensive model estimation under both data sources and analysis of the effects on the model estimates of the change from IHS to HPDI. Comparisons of IHS and HPDI data series, however, reveal no evidence of any large or systematic differences between the raw IHS and HPDI estimates that serve as model inputs. Figure 1 illustrates the overall order of magnitude of the differences between

74

Cobalt discovery replaces precious metals as industrial catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

Cobalt discovery replaces precious metals Cobalt discovery replaces precious metals Cobalt discovery replaces precious metals as industrial catalyst Cobalt holds promise as an industrial catalyst with potential applications in such energy-related technologies such as production of biofuels and reduction of carbon dioxide. November 26, 2012 The artwork depicts the substitution of cobalt for precious metals in catalysis as a variation on the ancient alchemical theme of transmuting base metals into precious ones. The artwork depicts the substitution of cobalt for precious metals in catalysis as a variation on the ancient alchemical theme of transmuting base metals into precious ones. Contact Nancy Ambrosiano Communications Office (505) 699-1149 Email Catalysts are also integral to thousands of industrial, synthetic, and

75

Cobalt discovery replaces precious metals as industrial catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

Cobalt Discovery Replaces Precious Metals Cobalt Discovery Replaces Precious Metals Cobalt discovery replaces precious metals as industrial catalyst Cobalt holds promise as an industrial catalyst with potential applications in such energy-related technologies such as production of biofuels and reduction of carbon dioxide. November 26, 2012 The artwork depicts the substitution of cobalt for precious metals in catalysis as a variation on the ancient alchemical theme of transmuting base metals into precious ones. The artwork depicts the substitution of cobalt for precious metals in catalysis as a variation on the ancient alchemical theme of transmuting base metals into precious ones. Contact Nancy Ambrosiano Communications Office (505) 699-1149 Email Catalysts are also integral to thousands of industrial, synthetic, and

76

Replacement-2-A Wholesale Power Rate Schedule | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2-A Wholesale Power Rate Schedule 2-A Wholesale Power Rate Schedule Replacement-2-A Wholesale Power Rate Schedule Area: Replacement Energy System: Kerr-Philpott This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter called the Customer) in North Carolina and Virginia to whom power is provided pursuant to contracts between the Government and the customer from the John H. Kerr and Philpott Projects (or Kerr-Philpott System). This rate schedule shall be applicable to the sale of wholesale energy purchased to meet contract minimum energy and sold under appropriate contracts between the Government and the Customer. Document Available for Download Replacement-2-A Rate Schedule More Documents & Publications Southeastern Power Administration 2010 Annual Report

77

Information Resources: LED Replacements for Linear Fluorescent Lamps  

NLE Websites -- All DOE Office Websites (Extended Search)

Replacements for Linear Fluorescent Lamps Webcast Replacements for Linear Fluorescent Lamps Webcast In this June 20, 2011 webcast on LED products marketed as replacements for linear fluorescent lamps, Jason Tuenge of the Pacific Northwest National Laboratory (PNNL) discussed current Lighting Facts-listed products as well as products evaluated in the latest CALiPER reports. Eric Richman, also of PNNL, reported on a recently completed GATEWAY demonstration project, in which LED and fluorescent lamps were installed in a variety of recessed troffer luminaires for comparison in an office environment. The presentation concluded with a discussion of specifications listed in a newly updated technology fact sheet. View presentation slides View the text-alternative version View the webcast (WMV 16 MB) Download Windows Media Player

78

Milling Machine Replacement Project (4587), 5/11/2012  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Milling Machine Replacement Projects (4587) Milling Machine Replacement Projects (4587) Program or Field Office: Y-12 Site Office Location(s) (City/County/State): Oak Ridge, Anderson County, Tennessee Proposed Action Description: Submit by E-mail The proposed action is to replace two large milling machines with two new medium sized CNC milling machines. The new machines will be connected to the digital network communication (DNC) system. Categorical Exclusion(s) Applied: 81.31 -Installation or relocation of machinery and equipment For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021. Regulatory Requirements in 10 CFR 1021.410(b): (See full text in regulation)

79

Simple Maintenance Saves Costly Furnace Repair/Replacement | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Simple Maintenance Saves Costly Furnace Repair/Replacement Simple Maintenance Saves Costly Furnace Repair/Replacement Simple Maintenance Saves Costly Furnace Repair/Replacement January 6, 2010 - 8:26am Addthis Chris Stewart Senior Communicator at DOE's National Renewable Energy Laboratory For the past few weeks, my forced-air gas furnace has been on the fritz. I blame this on the fact that I haven't been as diligent as I should have been with regular furnace maintenance, which includes: Checking the condition of the vent connection pipe and chimney Checking the physical integrity of the heat exchanger Adjusting the controls to provide optimum water and air temperature settings for both efficiency and comfort Having a technician perform a combustion-efficiency test Checking the combustion chamber for cracks. Testing for carbon monoxide

80

Sprinkler Head Replacement (4586), 4/24/2012  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sprinkler Head Replacement Projects (4586) Sprinkler Head Replacement Projects (4586) Program or Field Office: Y-12 Site Office Location(s) (Citv/Countv/State): Oak Ridge, Anderson County, Tennessee Proposed Action Description: The proposed action is to replace approximately 1 ,300 sprinkler heads upgrade fire protection systems. Categorical Exclusion(s) Applied: 81.3- Routine maintenance Submit by E-mail For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021. Regulatory Requirements in 10 CFR 1021.410(b): (See full text in regulation) [{Jrhe proposal fits within a class of actions that is listed in Appendix A orB to 10 CFR Part 1021, Subpart D. To fit within the classes of actions listed in 10 CFR Part 1021, Subpart D, Appendix B, a proposal must be one that would not: (1) threaten

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Microsoft Word - CX-TroutdaleWindowReplacement_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2011 , 2011 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Eric Weekley Project Manager - NWM-4 Proposed Action: Replace existing steel windows at the Troutdale Substation control house PP&A Project No.: PP&A-1699 Budget Information: Work Order No. 242796 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance activities and custodial services for buildings, structures, ... Location: Bonneville Power Administration's (BPA) Troutdale Substation located in Troutdale, Oregon Proposed by: BPA Description of the Proposed Action: BPA proposes to replace the deteriorating existing steel windows at the Troutdale Substation control house with new, in-kind steel windows.

82

Guide for Determining Motor Repair versus Motor Replacement  

Science Conference Proceedings (OSTI)

The Motor Replacement/Refurbishment Guide (MRRG) was written to aid with the determination on whether to repair an existing motor or to purchase a replacement motor. This guideline provides the basic tools necessary to make a determination based upon, but not limited to, the extent of the repair scope and the cost of the repair. This guideline presents a process to be utilized by the station or corporate motor specialist to assess the motor repair scope both initial and revised. The data gathering proces...

2005-12-23T23:59:59.000Z

83

CX-007674: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-007674: Categorical Exclusion Determination Replace Degraded Chemical Hood Exhaust Duct in 735-A, D-wing Service Floor CX(s) Applied: B2.3 Date: 10252011...

84

Downhole replaceable drill bit: progress report and program plan  

DOE Green Energy (OSTI)

The significant progress in the development of the downhole replaceable drill bit which had been completed by the end of January 1976 is reviewed. A long-range program plan is included to indicate the level of effort required to bring this system to commercial production.

Newsom, M.M.; St. Clair, J.A.; Ashmore, R.F.; Dodd, H.M. Jr.

1976-06-01T23:59:59.000Z

85

HVAC & Building Management Control System Energy Efficiency Replacements  

SciTech Connect

The project objective was the replacement of an aging, un-repairable HVAC system which has grown inefficient and a huge energy consumer with low energy and efficient HVAC units, and installation of energy efficient building control technologies at City's YMCA Community Center.

Hernandez, Adriana

2012-09-21T23:59:59.000Z

86

Single-molecule electron diffraction imaging with charge replacement  

E-Print Network (OSTI)

We investigate the possibility of non-destructive electron diffraction imaging of a single molecule to determine its structure. The molecular specimen will be held on a free-standing sheet of graphene. Due to the high conductivity of graphene, electrons lost by ionization would be rapidly replaced, enabling repeated nondestructive interrogation. Limits of resolution, maximum particle size and required electron flux are assessed.

Fill, E E; Raizen, M

2008-01-01T23:59:59.000Z

87

Plant Process Computer Upgrade Guidelines, Volume 1: Replacement Guidelines  

Science Conference Proceedings (OSTI)

The gradual obsolescence of the original plant process computers at nuclear power plants decreases their effectiveness in supporting plant operation and maintenance. This project, based on the practical experience of utility personnel, presents guidelines on plant process computer replacement planning and implementation.

1993-01-01T23:59:59.000Z

88

Selection and Implementation of a Replacement Cutting Tool Selection Application  

Science Conference Proceedings (OSTI)

A new commercial cutting tool software package replaced an internally created legacy system. This report describes the issues that surfaced during the migration and installation of the commercial package and the solutions employed. The primary issues discussed are restructuring the data between two drastically different database schemas and the creation of individual component graphics.

Rice, Gordon

2008-10-06T23:59:59.000Z

89

Economics of chlorofluorocarbon (CFC) machine replacement. Master's thesis  

Science Conference Proceedings (OSTI)

Continued use of chlorofluorocarbon (CFC) refrigerants may have a severe financial as well as operational impact on the users of air-conditioning and other refrigeration equipment as price increases continue and production is phased out. With production of CFC's coming to a halt on 31 December 1995, the two major refrigerants that have been used in commercial and industrial cooling applications will no longer be available. The phase out of production is a result of national and international agreement that these, as well as other CFC's, are a primary cause of the depletion of the stratospheric ozone layer. To help the user reduce this impact, an economic model based on the time value of money and utilizing replacement analysis was developed. The model is designed to require the user to supply information on his own equipment and on the projected costs of non-CFC replacement equipment. After running the model, the point in time when the existing equipment should be replaced is indicated. By way of example, the model is applied to a centrifugal chiller application. The results of this approach indicate that the increase in CFC costs is only a small factor in the cost of chiller operation. Rather than make a replacement to avoid the high price of refrigerant, the controlling factor is the overall cost of power consumption required to provide the cooling effect.

Rudderow, G.D.

1994-09-01T23:59:59.000Z

90

Operations, Maintenance, and Replacement 10-Year Plan, 1990 -1999.  

SciTech Connect

In 1988 Bonneville Power Administration (BPA) began work on this Operations, Maintenance, and Replacement 10-Year Plan to develop a levelized program that would assure high system reliability. During the Programs in Perspective (PIP) meetings in the late summer and fall of 1988, many of the concerns to be addressed in an Operations, Maintenance, and Replacement Plan were identified. Following these PIP meetings BPA established internal work groups. During the winter and spring of 1989, these work groups developed technical background and issue papers on topics that ranged from substation maintenance to environmental protection. In addition, a customer forum group was established and met on several occasions to review work on the plan, to offer ideas and points of view, and to assure that BPA understood customer concerns. Based on recommendations from the work group reports and customer input, BPA's O M Management Team developed the draft Operations, Maintenance, and Replacement 10-Year Plan that was released for public comment during the spring of 1990. During the public review period, BPA received a number of written comments from customers and the interested public. In addition, special meetings were held with interested customers. This final Operations, Maintenance, and Replacement 10-Year Plan reflects BPA's response to customers and interested public on each topic discussed in the 10-Year Plan. The plan is a distillation of BPA's strategies to achieve a levelized program over 10 years.

United States. Bonneville Power Administration.

1990-08-01T23:59:59.000Z

91

Operations, Maintenance, and Replacement 10-Year Plan, 1990--1999  

SciTech Connect

In 1988 Bonneville Power Administration (BPA) began work on this Operations, Maintenance, and Replacement 10-Year Plan to develop a levelized program that would assure high system reliability. During the Programs in Perspective (PIP) meetings in the later summer and fall of 1988, many of the concerns to be addressed in an Operations, Maintenance, and Replacement Plan were identified. Following these PIP meetings BPA established internal work groups. During the winter and spring of 1989, these work groups developed technical background and issue papers on topics that ranged from substation maintenance to environmental protection. In addition, a customer forum group was established and met on several occasions to review work on the plan, to offer ideas and points of view, and to assure that BPA understood customer concerns. Based on recommendations from the work group reports and customer input, BPA's O M Management Team developed the draft Operations, Maintenance, and Replacement 10-Year Plan that was released for public comment during the spring of 1990. During the public review period, BPA received a number of written comments from customers and the interested public. In addition, special meetings were held with interested customers. This final Operations, Maintenance, and Replacement 10-year Plan reflects BPA's response to customers and interested public on each topic discussed in the 10-Year Plan. The plan is a distillation of BPA's strategies to achieve a levelized program over 10 years.

Not Available

1990-08-01T23:59:59.000Z

92

--No Title--  

NLE Websites -- All DOE Office Websites (Extended Search)

Supply Air Handling Unit (AHU) replacement located on SE Roof above E133. Replace Air Handling Unit HVAC-AHU-20984 (HVAC-FAN-E21) with HVAC-AHU-E-1, Bldg 773-A, Sec E SE Roof...

93

Categorical Exclusion 4567, MPLE Test Stand Replacement Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

.Forn1 .Forn1 Project Title: MPLE Test Stand Replacement Project (4567) Oak Ridge Tennessee This work scope is upgrade and replace equipment with a new high-pressure leak testing capability. General AdministrationlManagement DA 1 - Routine business actions DA2 - Administrative contract amendments DA4 Interpretations/rulings for existing regulations DA5 - Regulatory interpretations without environmental effect DA6 Procedural rulemakings upgrade DA7 - Transfer of property, use unchanged DA8 - Award of technical supportlM&O/personal service contracts DA9 - Info gathering, analysis, documentation, dissemination, and training DA I 0 - Reports on non-DOE legislation DAII Technical advice and planning assistance construction/operation/decommissioning DA 12 -

94

Microsoft Word - CX-Coulee_Westside_Relay_Replacement_130205.docx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6, 2013 6, 2013 REPLY TO ATTN OF: KEC-4 SUBJECT: Environmental Clearance Memorandum Roy Slocum Project Manager - TEP-CSB-2 Proposed Action: Coulee-Westside Transfer Trip Replacement Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.7 Electronic Equipment Locations: Grand Coulee, WA and Spokane, WA Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: The BPA has entered into a three-party agreement with Bureau of Reclamation (Bureau) and Avista Corporation (Avista) to coordinate the replacement of relays and removal of transfer trip equipment at Avista's Westside Substation and the Bureau's Grand Coulee Switchyard on the Grand Coulee-Westside 230-kilovolt (kV) Transmission Line. Under this agreement, BPA proposes to:

95

Microsoft Word - Roza_Transformer_Replacement_CX_Final.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Clearance Memorandum Clearance Memorandum Patricia Smith Project Manager KEWU-4 Proposed Action: Replace two broken transformers near the Roza Dam adult trap facility Budget Information: Work Order #188534, Task #1 Fish and Wildlife Project No.: 1997-013-25 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B4.6 Additions or modifications to electric power transmission facilities that would not affect the environment beyond the previously developed facility area including, but not limited to, switchyard rock grounding upgrades, secondary containment projects, paving projects, seismic upgrading, tower modifications, changing insulators, and replacement of poles, circuit breakers, conductors, transformers, and crossarms. Location: Roza Diversion Dam Adult Trap Facility , Township 15 North, Range 19 East,

96

L Prize Competition Winner 60W Incandesent Replacement Lamp Update  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Deployment Technology Deployment Working Group L Prize ® Competition Winner 60W Incandescent Replacement Lamp Update James E. Rannels, Senior Advisor L Prize Competition D&R International May 23, 2012 Philips Wins First L Prize 2 * August 3, 2011: Philips announced as winner of 60W replacement bulb category * Product distributed thru commercial and retail channels Image courtesy of Philips -...[O]nce an award is made the authorizing Act directs General Services Administration to develop federal purchasing schedules for solid-state lamps that meet or exceed the specifications laid out in the prize category-so long as it is cost effective. I hope the GSA begins this process soon.‖

97

Measure Guideline: Air Conditioner Diagnostics, Maintenance, and Replacement  

SciTech Connect

This guideline responds to the need for an efficient means of identifying, diagnosing, and repairing faults in air conditioning systems in existing homes that are undergoing energy upgrades. Inadequate airflow due to constricted ducts or undersized filters, improper refrigerant charge, and other system defects can be corrected at a fraction of the cost of equipment replacement and can yield significant savings. The guideline presents a two-step approach to diagnostics and repair.

Springer, D.; Dakin, B.

2013-03-01T23:59:59.000Z

98

Repair and Replacement Applications Center Joint Welding Procedure Qualification Program  

Science Conference Proceedings (OSTI)

At the request of the EPRI Repair and Replacement Applications Center subscribers, a Joint Welding Procedure Qualification Program was developed to provide a medium whereby multiple utilities can share in the qualification of specific welding procedures. The program was developed in such a manner that it will supplement existing utility welding qualification programs. Specifically the program incorporates the more stringent attributes of each utility's internal welding program while meeting the individua...

1997-11-12T23:59:59.000Z

99

Polypeptide having an amino acid replaced with N-benzylglycine  

DOE Patents (OSTI)

The present invention relates to one or more polypeptides having useful biological activity in a mammal, which comprise: a polypeptide related to bradykinin of four to ten amino acid residues wherein one or more specific amino acids in the polypeptide chain are replaced with achiral N-benzylglycine. These polypeptide analogues have useful potent agonist or antagonist pharmacological properties depending upon the structure. A preferred polypeptide is (N-benzylglycine.sup.7)-bradykinin.

Mitchell, Alexander R. (Livermore, CA); Young, Janis D. (Los Angeles, CA)

1996-01-01T23:59:59.000Z

100

Remote telerobotic replacement for master-slave manipulator  

SciTech Connect

A remotely replaceable telerobotic manipulator (TRM) has been developed and deployed at the Defense Waste Processing Facility (DWPF) in support of its radioactive operation. The TRM replaces a Master-Slave Manipulator (MSM). The TRM is in use for both routine and recovery operations for the radioactive waste vitrification melter, the primary production device within the DWPF. The arm was designed for deployment and operation using an existing MSM penetration. This replacement of an existing MSM with a high power robotic device demonstrates the capability to perform similar replacement in other operating facilities. The MSM`s were originally deployed in the DWPF to perform routine light capacity tasks. During the testing phase of the DWPF, prior to its radioactive startup in 5/96, the need to remove glass deposits that can form at the melter discharge during filling of glass containment canisters was identified. The combination of high radiation and contamination in the DWPF melter cell during radioactive operation eliminated personnel entry as a recovery option. Therefore remote cleaning methods had to be devised. The MSM`s had neither the reach nor the strength required for this task. It became apparent that a robust manipulator arm would be required for recovery from these potential melter discharge pluggage events. The existing wall penetrations, used for the MSM`s, could not be altered for seismic and radiological reasons. The new manipulator was required to be of considerable reach, due to existing physical layout, and strength, due to the glass removal requirement. Additionally, the device would have to compatible with high radiation and remote crane installation. The physical size of the manipulator and the weight of components must be consistent with the existing facilities. It was recognized early-on that a manipulator of sufficient strength to recover from a pluggage event would require robotic functions to constrain undesirable motions.

Heckendorn, F.M.; Iverson, D.C. [Westinghouse Savannah River Company, Aiken, SC (United States); LaValle, D.R. [PaR Systems Inc., Shorview, MN (United States)

1997-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Draft 1992 : Operations, Maintenance, and Replacement 10-Year Plan.  

SciTech Connect

Two years ago, BPA released its first-ever Operations, Maintenance, and Replacement (OM&R) 10-Year Plan. That effort broke new ground and was an extensive look at the condition of Operations, Maintenance, and Replacement on BPA`s power system. This document -- the 1992 OM&R 10-Year Plan -- uses that original plan as its foundation. It takes a look at how well BPA has accomplished the challenging task set out in the 1990 Plan. The 1992 Plan also introduces the Construction Program. Construction`s critical role in these programs is explored, and the pressures of construction workload -- such as the seasonal nature of the work and the broad swings in workload between projects and years -- are discussed. The document then looks at how situations may have changed with issues explored initially in the 1990 Plan. Importantly, this Plan also surfaces and explains some new issues that threaten to impact BPA`s ability to accomplish its OM&R workload. Finally, the document focuses on the revised strategies for Operations, Maintenance, Replacement, Construction, and Environment for the 1992 to 2001 time period, including the financial and human resources needed to accomplish those strategies.

United States. Bonneville Power Administration.

1992-05-01T23:59:59.000Z

102

Draft 1992 : Operations, Maintenance, and Replacement 10-Year Plan.  

SciTech Connect

Two years ago, BPA released its first-ever Operations, Maintenance, and Replacement (OM R) 10-Year Plan. That effort broke new ground and was an extensive look at the condition of Operations, Maintenance, and Replacement on BPA's power system. This document -- the 1992 OM R 10-Year Plan -- uses that original plan as its foundation. It takes a look at how well BPA has accomplished the challenging task set out in the 1990 Plan. The 1992 Plan also introduces the Construction Program. Construction's critical role in these programs is explored, and the pressures of construction workload -- such as the seasonal nature of the work and the broad swings in workload between projects and years -- are discussed. The document then looks at how situations may have changed with issues explored initially in the 1990 Plan. Importantly, this Plan also surfaces and explains some new issues that threaten to impact BPA's ability to accomplish its OM R workload. Finally, the document focuses on the revised strategies for Operations, Maintenance, Replacement, Construction, and Environment for the 1992 to 2001 time period, including the financial and human resources needed to accomplish those strategies.

United States. Bonneville Power Administration.

1992-05-01T23:59:59.000Z

103

Overview of CFC replacement issues for household refrigeration  

Science Conference Proceedings (OSTI)

In 1974, the famous ozone depletion theory of Rowland and Molina claimed that chlorofluorocarbons (CFCs) diffuse into the stratosphere where they are broken down by photolysis to release chlorine atoms that catalytically destroy ozone. Although the understanding of the science is still imperfect, there is little doubt that CFCs play a major role in the Antarctic ozone hole phenomenon and the decline in ozone observed in the rest of the world. Another issue that has become increasingly important is the potential of CFCs to change the earth's temperature and to modify the climate. While the main impact in global warming is made by increased concentrations of carbon dioxide, CFCs and other trace gases also contribute to this effect. In an effort to respond to the global environmental threat, a CFC protocol was adopted during a diplomatic conference in Montreal. This document, known as the Montreal Protocol, was ratified in 1988 and put into effect on January 1, 1989. In accordance with Article 6 of the Montreal Protocol, the countries that signed the agreement shall periodically assess the control measures provided for in the Protocol. As part of that assessment process, household refrigeration was investigated to determine the status of CFC-12 replacements. The conclusion was that much progress has been made towards finding a suitable replacement. Compressors designed for HFC-134a have efficiencies comparable to those for CFC-12 and acceptable reliability tests have been obtained with ester lubricants. In addition, other replacements such as R-152a and refrigerant mixtures exist, but will require more study. Cycle options, such as the Stirling cycle, may be viable, but are further out in the future. The impact of new refrigerants is expected to result in elimination of CFC-12 consumption in developed countries by 1997 and in developing countries by 2005.

Vineyard, E.A. (Oak Ridge National Lab., TN (United States)); Roke, L. (Fisher and Paykel, Auckland (New Zealand)); Hallett, F. (Frigidaire, Washington, DC (United States))

1991-01-01T23:59:59.000Z

104

Overview of CFC replacement issues for household refrigeration  

Science Conference Proceedings (OSTI)

In 1974, the famous ozone depletion theory of Rowland and Molina claimed that chlorofluorocarbons (CFCs) diffuse into the stratosphere where they are broken down by photolysis to release chlorine atoms that catalytically destroy ozone. Although the understanding of the science is still imperfect, there is little doubt that CFCs play a major role in the Antarctic ozone hole phenomenon and the decline in ozone observed in the rest of the world. Another issue that has become increasingly important is the potential of CFCs to change the earth`s temperature and to modify the climate. While the main impact in global warming is made by increased concentrations of carbon dioxide, CFCs and other trace gases also contribute to this effect. In an effort to respond to the global environmental threat, a CFC protocol was adopted during a diplomatic conference in Montreal. This document, known as the Montreal Protocol, was ratified in 1988 and put into effect on January 1, 1989. In accordance with Article 6 of the Montreal Protocol, the countries that signed the agreement shall periodically assess the control measures provided for in the Protocol. As part of that assessment process, household refrigeration was investigated to determine the status of CFC-12 replacements. The conclusion was that much progress has been made towards finding a suitable replacement. Compressors designed for HFC-134a have efficiencies comparable to those for CFC-12 and acceptable reliability tests have been obtained with ester lubricants. In addition, other replacements such as R-152a and refrigerant mixtures exist, but will require more study. Cycle options, such as the Stirling cycle, may be viable, but are further out in the future. The impact of new refrigerants is expected to result in elimination of CFC-12 consumption in developed countries by 1997 and in developing countries by 2005.

Vineyard, E.A. [Oak Ridge National Lab., TN (United States); Roke, L. [Fisher and Paykel, Auckland (New Zealand); Hallett, F. [Frigidaire, Washington, DC (United States)

1991-12-31T23:59:59.000Z

105

A Centrifugal Contactor Design to Facilitate Remote Replacement  

SciTech Connect

Advanced designs of nuclear fuel recycling and radioactive waste treatment plants are expected to include more ambitious goals for solvent extraction based separations including; higher separations efficiency, high-level waste minimization, and a greater focus on continuous processes to minimize cost and footprint. Therefore, Annular Centrifugal Contactors (ACCs) are destined to play a more important role for such future processing schemes. This work continues the development of remote designs for ACCs that can process the large throughputs needed for future nuclear fuel recycling and radioactive waste treatment plants. A three stage, 12.5 cm diameter rotor module has been constructed and is being evaluated for use in highly radioactive environments. This prototype assembly employs three standard CINC V-05 clean-in-place (CIP) units modified for remote service and replacement via new methods of connection for solution inlets, outlets, drain and CIP. Hydraulic testing and functional checks were successfully conducted and then the prototype was evaluated for remote handling and maintenance. Removal and replacement of the center position V-05R contactor in the three stage assembly was demonstrated using an overhead rail mounted PaR manipulator. Initial evaluation indicates a viable new design for interconnecting and cleaning individual stages while retaining the benefits of commercially reliable ACC equipment. Replacement of a single stage via remote manipulators and tools is estimated to take about 30 minutes, perhaps fast enough to support a contactor change without loss of process equilibrium. The design presented in this work is scalable to commercial ACC models from V-05 to V-20 with total throughput rates ranging from 20 to 650 liters per minute.

David H. Meikrantz; Jack. D. Law; Troy G. Garn; Lawrence L. Macaluso

2011-03-01T23:59:59.000Z

106

Programmatic mission capabilities - chemistry and metallurgy research replacement (CMRR) project  

Science Conference Proceedings (OSTI)

CMRR will have analysis capabilities that support all the nuclear-material programs and national security needs. CMRR will replace the aging CMR Building and provide a key component responsive infrastructure necessary to sustain all nuclear programs and the nuclear-weapons complex. Material characterization capabilities - evaluate the microstructures and properties of nuclear materials and provide experimental data to validate process and performance models. Analytical chemistry capabilities - provide expertise in chemical and radiochemical analysis of materials where actinide elements make up a significant portion of the sample.

Gunderson, L Nguyen [Los Alamos National Laboratory; Kornreich, Drew E [Los Alamos National Laboratory; Wong, Amy S [Los Alamos National Laboratory

2011-01-04T23:59:59.000Z

107

Replacing Hazelwood Power Station Critique of Environment Victoria report  

E-Print Network (OSTI)

Hazelwood Power Station is Australias most CO2 emission intensive power station. Replacing it with cleaner technology could reduce Australias CO2 emissions by 12 to 16 Mt/a. Energy Victoria recently commissioned a report by Green Energy Markets Pty Ltd to consider options. But the report has a pro-renewables bias, avoids the best option (gas only), and contains many inconsistencies. Comparing the renewables and gas option against the gas only option shows Emissions saved per year: 12.2 Mt/a versus 11.8 Mt/a; Capital cost: $6-$7 billion versus $2 billion;

Peter Lang

2010-01-01T23:59:59.000Z

108

Solid-State Lighting: LED Replacement Lamps: Current Performance and the  

NLE Websites -- All DOE Office Websites (Extended Search)

LED Replacement Lamps: Current LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR® to someone by E-mail Share Solid-State Lighting: LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR® on Facebook Tweet about Solid-State Lighting: LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR® on Twitter Bookmark Solid-State Lighting: LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR® on Google Bookmark Solid-State Lighting: LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR® on Delicious Rank Solid-State Lighting: LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR® on Digg Find More places to share Solid-State Lighting: LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR® on

109

DOE-HDBK-1129-2007: Tritium Handling and Safe Storage; Replaced...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HDBK-1129-2007: Tritium Handling and Safe Storage; Replaced by DOE-HDBK-1129-2008 DOE-HDBK-1129-2007: Tritium Handling and Safe Storage; Replaced by DOE-HDBK-1129-2008 Tritium...

110

Lipid Analysis and Lipidomics: New Techniques & ApplicationChapter 17 Fat Replacers: An Overview  

Science Conference Proceedings (OSTI)

Lipid Analysis and Lipidomics: New Techniques & Application Chapter 17 Fat Replacers: An Overview Methods and Analyses eChapters Methods - Analyses Books Downloadable pdf of Chapter 17 Fat Replacers: An Overview from

111

Fuel gas main replacement at Acme Steel's coke plant  

SciTech Connect

ACME Steel's Chicago coke plant consists of two 4-meter, 50-oven Wilputte underjet coke-oven batteries. These batteries were constructed in 1956--1957. The use of blast furnace gas was discontinued in the late 1960's. In 1977--1978, the oven walls in both batteries were reconstructed. Reconstruction of the underfire system was limited to rebuilding the coke-oven gas reversing cocks and meter in orifices. By the early 1980's, the 24-in. diameter underfire fuel gas mains of both batteries developed leaks at the Dresser expansion joints. These leaks were a result of pipe loss due to corrosion. Leaks also developed along the bottoms and sides of both mains. A method is described that permitted pushing temperatures to be maintained during replacement of underfire fuel gas mains. Each of Acme's two, 50-oven, 4-metric Wilputte coke-oven, gas-fired batteries were heated by converting 10-in. diameter decarbonizing air mains into temporary fuel gas mains. Replacement was made one battery at a time, with the temporary 10-in. mains in service for five to eight weeks.

Trevino, O. (Acme Steel Co., Chicago, IL (United States). Chicago Coke Plant)

1994-09-01T23:59:59.000Z

112

Income Replacement and Reemployment Programs in Michigan and Neighboring States  

E-Print Network (OSTI)

Governments in every developed industrial economy administer programs that partially replace the earnings of workers who suffer job loss or on-the-job injury. In addition, governments administer programs to help job losers gain reemployment, either through direct job placement (for those who are job-ready) or through retraining (for those who are not). This chapter describes and discusses current policy issues surrounding the main social insurance and reemployment programs in Michigan: Unemployment Insurance (UI), which partially replaces lost earnings following loss of a job; Workers ' Compensation (WC), which pays for medical treatment, vocational rehabilitation, and lost earnings following a work-related injury or illness; and the cluster of reemployment and training programs that, since 1998, has come under the Workforce Investment Act (WIA). In addition to describing these programs, a main goal of the chapter is to offer a critical view of Michigan's programs by comparing them with corresponding programs in neighboring states. Discussion of these three programs could hardly be more timely. UI has come under attack for a range of alleged failings, and the Michigan legislature passed a bill in April 2002 that increased weekly benefits, lengthened benefit durations, and tightened the eligibility requirements

Stephen A. Woodbury; Stephen A. Woodbury

2002-01-01T23:59:59.000Z

113

Functions and Requirements and Specifications for Replacement of the Computer Automated Surveillance System (CASS)  

SciTech Connect

Functional requirements and specifications document for system to replace tank farm computer automated waste tank surveillance system.

DOUKA, K.C.

2000-05-05T23:59:59.000Z

114

Guideline for the Seismic Technical Evaluation of Replacement Items for Nuclear Power Plants  

Science Conference Proceedings (OSTI)

This guideline provides practical, cost-effective techniques for reasonably assuring that replacement items will meet seismic performance requirements. Meeting such requirements is necessary to maintain the seismic design basis of commercial nuclear power plants. The guideline also offers a method for determining when a seismic technical evaluation of replacement items is required as part of the procurement process for spare and replacement items.

1993-06-01T23:59:59.000Z

115

Wood Pellets for UBC Boilers Replacing Natural Gas Based on LCA  

E-Print Network (OSTI)

Wood Pellets for UBC Boilers Replacing Natural Gas Based on LCA Submitted to Dr. Bi By Bernard Chan Pellets for UBC Boilers Replacing Natural Gas" By Bernard Chan, Brian Chan, and Christopher Young Abstract This report studies the feasibility of replacing natural gas with wood pellets for UBC boilers. A gasification

116

DEVELOPMENT OF REMOTE HANFORD CONNECTOR GASKET REPLACEMENT TOOLING FOR DWPF  

SciTech Connect

The Defense Waste Processing Facility (DWPF) requested the Savannah River National Laboratory (SRNL) to develop tooling and equipment to remotely replace gaskets in mechanical Hanford connectors to reduce personnel radiation exposure as compared to the current hands-on method. It is also expected that radiation levels will continually increase with future waste streams. The equipment is operated in the Remote Equipment Decontamination Cell (REDC), which is equipped with compressed air, two master-slave manipulators (MSM's) and an electro-mechanical manipulator (EMM) arm for operation of the remote tools. The REDC does not provide access to electrical power, so the equipment must be manually or pneumatically operated. The MSM's have a load limit at full extension of ten pounds, which limited the weight of the installation tool. In order to remotely replace Hanford connector gaskets several operations must be performed remotely, these include: removal of the spent gasket and retaining ring (retaining ring is also called snap ring), loading the new snap ring and gasket into the installation tool and installation of the new gasket into the Hanford connector. SRNL developed and tested tools that successfully perform all of the necessary tasks. Removal of snap rings from horizontal and vertical connectors is performed by separate air actuated retaining ring removal tools and is manipulated in the cell by the MSM. In order install a new gasket, the snap ring loader is used to load a new snap ring into a groove in the gasket installation tool. A new gasket is placed on the installation tool and retained by custom springs. An MSM lifts the installation tool and presses the mounted gasket against the connector block. Once the installation tool is in position, the gasket and snap ring are installed onto the connector by pneumatic actuation. All of the tools are located on a custom work table with a pneumatic valve station that directs compressed air to the desired tool and vents the tools as needed. Extensive testing of tooling operation was performed in the DWPF manipulator repair shop. This testing allowed the operators to gain confidence before the equipment was exposed to radioactive contamination. The testing also led to multiple design improvements. On July 17 and 29, 2008 the Remote Gasket Replacement Tooling was successfully demonstrated in the REDC at the DWPF of The Savannah River Site.

Krementz, D.; Coughlin, Jeffrey

2009-05-05T23:59:59.000Z

117

COLLOQUIUM: Are Mushrooms the Next Polymers?: Growing Plastic Replacements  

NLE Websites -- All DOE Office Websites (Extended Search)

March 20, 2013, 4:15pm to 6:30pm March 20, 2013, 4:15pm to 6:30pm Colloquia MBG Auditorium COLLOQUIUM: Are Mushrooms the Next Polymers?: Growing Plastic Replacements with Fungi Mr. Gavin McIntyre Ecovative Design LLC Colloquium Committee: The Princeton Plasma Physics Laboratory 2013-2014 Colloquium Committee is comprised of the following people. Please feel free to contact them by e-mail regarding any possible speakers or topics for future colloquia. Carol Ann Austin caustin@pppl.gov John Greenwald, Chair jgreenwa@pppl.gov Charles H. Skinner cskinner@pppl.gov Daren Stotler dstotler@pppl.gov Carol Ann Austin 609-243-2484 Contact Information Coordinator(s): Ms. Carol Ann Austin caustin@pppl.gov Host(s): Ms. Kelsey Tresemer ktreseme@pppl.gov PPPL Entrance Procedures Visitor Information, Directions, Security at PPPL

118

Vehicle Technologies Office: Fact #394: October 17, 2005 Fuel to Replace  

NLE Websites -- All DOE Office Websites (Extended Search)

4: October 17, 4: October 17, 2005 Fuel to Replace Gasoline and Diesel Fuel to someone by E-mail Share Vehicle Technologies Office: Fact #394: October 17, 2005 Fuel to Replace Gasoline and Diesel Fuel on Facebook Tweet about Vehicle Technologies Office: Fact #394: October 17, 2005 Fuel to Replace Gasoline and Diesel Fuel on Twitter Bookmark Vehicle Technologies Office: Fact #394: October 17, 2005 Fuel to Replace Gasoline and Diesel Fuel on Google Bookmark Vehicle Technologies Office: Fact #394: October 17, 2005 Fuel to Replace Gasoline and Diesel Fuel on Delicious Rank Vehicle Technologies Office: Fact #394: October 17, 2005 Fuel to Replace Gasoline and Diesel Fuel on Digg Find More places to share Vehicle Technologies Office: Fact #394: October 17, 2005 Fuel to Replace Gasoline and Diesel Fuel on AddThis.com...

119

Replacement of Mushroom Cage Gastrostomy Tube Using a Modified Technique to Allow Percutaneous Replacement with an Endoscopic Tube in Patients with Amyotrophic Lateral Sclerosis  

Science Conference Proceedings (OSTI)

Radiologic inserted gastrostomy (RIG) is the preferred method in our institution for enteral feeding in amyotrophic lateral sclerosis (ALS). Skin-level primary-placed mushroom cage gastrostomy tubes become tight with weight gain. We describe a minimally invasive radiologic technique for replacing mushroom gastrostomy tubes with endoscopic mushroom cage tubes in ALS. All patients with ALS who underwent replacement of a RIG tube were included. Patients were selected for a modified replacement when the tube length of the primary placed RIG tube was insufficient to allow like-for-like replacement. Replacement was performed under local anesthetic and fluoroscopic guidance according to a preset technique, with modification of an endoscopic mushroom cage gastrostomy tube to allow percutaneous placement. Assessment of the success, safety, and durability of the modified technique was undertaken. Over a 60-month period, 104 primary placement mushroom cage tubes in ALS were performed. A total of 20 (19.2%) of 104 patients had a replacement tube positioned, 10 (9.6%) of 104 with the modified technique (male n = 4, female n = 6, mean age 65.5 years, range 48-85 years). All tubes were successfully replaced using this modified technique, with two minor complications (superficial wound infection and minor hemorrhage). The mean length of time of tube durability was 158.5 days (range 6-471 days), with all but one patient dying with a functional tube in place. We have devised a modification to allow percutaneous replacement of mushroom cage gastrostomy feeding tubes with minimal compromise to ALS patients. This technique allows tube replacement under local anesthetic, without the need for sedation, an important consideration in ALS.

Ammar, Thoraya [King's College Hospital, Department of Radiology (United Kingdom); Rio, Alan [King's College Hospital, Department of Dietetics (United Kingdom); Ampong, Mary Ann [King's College Hospital, Department of Neurosciences (United Kingdom); Sidhu, Paul S., E-mail: paulsidhu@nhs.ne [King's College Hospital, Department of Radiology (United Kingdom)

2010-06-15T23:59:59.000Z

120

Replacement energy, capacity, and reliability costs for permanent nuclear reactor shutdowns  

SciTech Connect

Average replacement power costs are estimated for potential permanent shutdowns of nuclear electricity-generating units. Replacement power costs are considered to include replacement energy, capacity, and reliability cost components. These estimates were developed to assist the US Nuclear Regulatory Commission in evaluating regulatory issues that potentially affect changes in serious reactor accident frequencies. Cost estimates were derived from long-term production-cost and capacity expansion simulations of pooled utility-system operations. Factors that affect replacement power cost, such as load growth, replacement sources of generation, and capital costs for replacement capacity, were treated in the analysis. Costs are presented for a representative reactor and for selected subcategories of reactors, based on estimates for 112 individual reactors.

VanKuiken, J.C., Buehring, W.A.; Hamilton, S.; Kavicky, J.A.; Cavallo, J.D.; Veselka, T.D.; Willing, D.L. [Argonne National Lab., IL (United States)

1993-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Rohm and Haas: Furnace Replacement Project Saves Energy and Improves Production at a Chemical Plant  

Science Conference Proceedings (OSTI)

This DOE Industrial Technologies Program spotlight describes how Rohm and Haas's Deer Park, Texas, chemical plant reduced natural gas usage and energy costs by replacing inefficient furnace equipment.

Not Available

2006-02-01T23:59:59.000Z

122

Microsoft Word - CX-Redmond-PilotButte-Lapine_RelayCommunicationReplac...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TO ATTN OF: KEPR-4 SUBJECT: Environmental Cleareance Memorandum Jim Riehl Electrical Engineer - TECC-CSB-2 Proposed Action: Replace a relaytransfer trip rack at Redmond...

123

Cost-Effective Replacement for Iodide in Dye-Sensitized Solar Cells  

Cost-Effective Replacement for Iodide in Dye-Sensitized Solar Cells Contact Information: Jeremy Nelson Phone: 970.491.7100 Email: jeremy.nelson@colostate.edu

124

Acceptance test procedure for SY Tank Farm replacement exhauster unit  

SciTech Connect

The proper functioning of a new 241-SY Tank Farm replacement exhauster will be acceptance tested, to establish operability and to provide an operational baseline for the equipment. During this test, a verification of all of the alarm and control circuits associated with the exhaust, which provide operating controls and/or signals to local and remote alarm/annunciator panels, shall be performed. Test signals for sensors that provide alarms, warnings, and/or interlocks will be applied to verify that alarm, warning, and interlock setpoints are correct. Alarm and warning lights, controls, and local and remote readouts for the exhauster will be verified to be adequate for proper operation of the exhauster. Testing per this procedure shall be conducted in two phases. The first phase of testing, to verify alarm, warning, and interlock setpoints primarily, will be performed in the MO-566 Fab Shop. The second phase of testing, to verify proper operation and acceptable interface with other tank farm systems, will be conducted after the exhauster and all associated support and monitoring equipment have been installed in the SY Tank Farm. The exhauster, which is mounted on a skid and which will eventually be located in the SY tank farm, receives input signals from a variety of sensors mounted on the skid and associated equipment. These sensors provide information such as: exhauster system inlet vacuum pressure; prefilter and HEPA filter differential pressures; exhaust stack sampler status; exhaust fan status; system status (running/shut down); and radiation monitoring systems status. The output of these sensors is transmitted to the exhauster annunciator panel where the signals are displayed and monitored for out-of-specification conditions.

Becken, G.W.

1994-12-16T23:59:59.000Z

125

--No Title--  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

located on SE Roof above E133. Replace Air Handling Unit HVAC-AHU-20984 (HVAC-FAN-E21) with HVAC-AHU-E-1, Bldg 773-A, Sec E SE Roof Savannah River Site Aiken South...

126

Optimal replacement period of a two-unit system with failure rate interaction and external shocks  

Science Conference Proceedings (OSTI)

In this article, a periodical replacement model for a two-unit system which is both subjected to failure rate interaction and external shocks will be presented. Without external shocks, each unit 1, whenever it fails, will act as an interior shock to ... Keywords: External shocks, Failure rate interaction, Periodical replacement policy, Two-unit system

Min-Tsai Lai; Ying-Chang Chen

2008-01-01T23:59:59.000Z

127

An Economical Decision Model for Water Pipe Replacement Using the Bayesian Theory  

Science Conference Proceedings (OSTI)

According to the limited annual budget for pipeline replacement, the most effective and economical plan is needed to available fund. A variety of factors contribute to pipe breaks, including pipe material, diameter, outer coating, operation pressure, ... Keywords: Bayesian theory, Pipe replacement, Water supply system, Economic, Break factor

Wang Chenwan, Tianqing, Li Ridong, Wei Hongyu

2013-01-01T23:59:59.000Z

128

An Improved Nuclear Vector Replacement Algorithm for Nuclear Magnetic Resonance Assignment  

E-Print Network (OSTI)

An Improved Nuclear Vector Replacement Algorithm for Nuclear Magnetic Resonance Assignment to the Nuclear Vector Replacement (NVR) algorithm [24] for high-throughput Nuclear Magnetic Resonance (NMR% accu- racy) on the same test suite examined in [24], and runs in O(n5/2 log (cn)) time where n

129

GRR/Section 19-WA-f - Water Well NOI for Replacement or Additional Wells |  

Open Energy Info (EERE)

GRR/Section 19-WA-f - Water Well NOI for Replacement or Additional Wells GRR/Section 19-WA-f - Water Well NOI for Replacement or Additional Wells < GRR Jump to: navigation, search GRR-logo.png GEOTHERMAL REGULATORY ROADMAP Roadmap Home Roadmap Help List of Sections Section 19-WA-f - Water Well NOI for Replacement or Additional Wells 19-WA-f - Water Well NOI for Replacement or Additional Wells.pdf Click to View Fullscreen Contact Agencies Washington State Department of Ecology Regulations & Policies Revised Code of Washington 90.44.100 Revised Code of Washington 18.104.048 Washington Administrative Code 173-160-151 Triggers None specified A developer seeking to use ground water for an activity may need to drill a new well in a different location than a previous well, drill an additional well at an existing location, or drill a replacement well at the same

130

Drafty Windows: Is it Better to Insulate or Replace Them? | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Drafty Windows: Is it Better to Insulate or Replace Them? Drafty Windows: Is it Better to Insulate or Replace Them? Drafty Windows: Is it Better to Insulate or Replace Them? February 9, 2010 - 8:45am Addthis Andrea Spikes Communicator at DOE's National Renewable Energy Laboratory I've lived in my condominium for several years, and though it naturally stays cooler in the summer (with all west-facing windows) I struggle to keep it warm in the winter without taking out a loan to pay utilities. Like any homeowner, I must answer the question: Is it better to try and insulate my existing window, or am I better off replacing it? Sometimes the answer is purely about upfront costs, but other times the inefficiency more than justifies the cost of replacement. There are several ways to make windows more efficient: The least expensive

131

EA-1793: Replacement Capability for Disposal of Remote-handled Low-level  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

793: Replacement Capability for Disposal of Remote-handled 793: Replacement Capability for Disposal of Remote-handled Low-level Waste Generated at the Department of Energy's Idaho Site EA-1793: Replacement Capability for Disposal of Remote-handled Low-level Waste Generated at the Department of Energy's Idaho Site Summary This EA evaluates the environmental impacts of replacement capability for disposal of remote-handled low-level radioactive waste (LLW) generated at the Idaho National Laboratory (INL) site beginning in October 2017. Public Comment Opportunities Submit Comments to: Mr. Chuck Ljungberg 1955 Fremont Avenue, Mailstop 1216 Idaho Falls, ID 83415 Electronic mail: rhllwea@id.doe.gov Documents Available for Download December 21, 2011 EA-1793: Finding of No Significant Impact Replacement Capability for Disposal of Remote-Handled Low-Level Radioactive

132

The deep water gas charged accumulator and its possible replacements  

E-Print Network (OSTI)

Blowout preventers are designed to shut in a well under pressure so that formation fluids that have moved into the wellbore can be contained and circulated out while continuous control of the well is maintained. Control Systems for the BOPs are of necessity highly efficient hydraulic systems. The objective is to operate functions, such as closing rams, on the BOP stack in as short a time as possible. Supplying enough volume of pressured hydraulic fluid to operate those emergency functions is essential. To have the necessary quantity of control fluid under pressure requires storing this fluid in accumulators. These accumulators operate by the expansion and compression of nitrogen gas that is separated from hydraulic fluid by either rubber bladders or pistons. Accumulators are used both on the surface and at the seafloor. As long as you use accumulators on the surface or in relatively shallow waters, you may not have a problem with the volume of hydraulic fluid capacity of gas charged accumulators. The problem may arise when the wellhead is at water depth of more than 3500 ft. In deep water drilling, the accumulators should be placed on the subsea blowout preventer stack to reduce hydraulic response times and provide a hydraulic power supply in case of interruption of surface communication. Accumulators are also used in subsea production control systems to provide local storage that allows smaller line sizes in control umbilicals. Hydraulic fluid capacity of an accumulator drops to 15% of its capacity on the surface and even less, depending on the water depth. A large number of accumulators are needed to perform BOP functions that could have been done by just a few of them on the surface or at relatively shallow water depth. Gas inside gas charged accumulators does not behave like an ideal gas as we go to very deep water, due to high hydrostatic pressure at that water depth. The higher the ambient pressure, the more the gas behaves like a real gas rather than an ideal gas and the lower the fluid capacity of the accumulators. Compressed gas has energy in it, and can release this energy at the time desired, that?s why it is used in accumulators. Now, we have to look for something that is able to store energy, but unlike the nitrogen, its functionality must not be affected by the increasing hydrostatic pressure of water as a function of water depth. Springs and heavy weights will be discussed as two options to replace nitrogen in accumulators. Efficient deep water accumulators would reduce the number of accumulators required in deepwater and cut the cost of the project. With the advent of such efficient accumulators, we can hope that one of the numerous problems of deepwater drilling has been solved and we can think of drilling in even deeper waters.

Mir Rajabi, Mehdi

2004-12-01T23:59:59.000Z

133

Guidelines for the Technical Evaluation of Replacement Items in Nuclear Power Plants (NCIG-11)  

Science Conference Proceedings (OSTI)

Using a systematic technical evaluation process, utilities can ensure that replacement parts for nuclear power plants are equivalent to the originals. Guidelines developed by EPRI and NCIG provide practical information and a systematic approach to procurement.

1990-01-08T23:59:59.000Z

134

Functions and Requirements and Specifications for Replacement of the Computer Automated Surveillance System (CASS)  

SciTech Connect

This functions, requirements and specifications document defines the baseline requirements and criteria for the design, purchase, fabrication, construction, installation, and operation of the system to replace the Computer Automated Surveillance System (CASS) alarm monitoring.

SCAIEF, C.C.

1999-12-16T23:59:59.000Z

135

Solid-State Lighting: Webinar: The L Prize-Winning LED A19Replacement...  

NLE Websites -- All DOE Office Websites (Extended Search)

Webinar: The L Prize-Winning LED A19 Replacement-What Commercial Building OwnersOperators Can Expect in 2012 to someone by E-mail Share Solid-State Lighting: Webinar: The L...

136

Variation in joint fluid composition and its effect on the tribology of replacement joint articulation  

E-Print Network (OSTI)

Polyethylene wear is a significant clinical problem limiting the long-term survival of joint replacement prostheses, particularly in total hip arthroplasty (THA) and total knee arthroplasty (TKA). Although the tribology ...

Mazzucco, Daniel Clarke, 1976-

2003-01-01T23:59:59.000Z

137

Plant Support Engineering: Guidance for Replacing Heat Exchangers at Nuclear Power Plants with Plate Heat Exchangers  

Science Conference Proceedings (OSTI)

This report is the first of a "suite" of guidelines that will enable licensees to be "intelligent customers" when faced with replacing major plant components like heat exchangers to support license renewal and plant life extension.

2006-07-31T23:59:59.000Z

138

Final Environmental Assessment for the Y-12 Steam Plant Life Extenstion Project - Steam Plant Replacement Subproject  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

93 93 Final Environmental Assessment for the Y-12 Steam Plant Life Extension Project - Steam Plant Replacement Subproject U.S. Department of Energy National Nuclear Security Administration August 2007 Final Y-12 Steam Plant Life Extension Project - Steam Plant Replacement Subproject - August 2007 i TABLE OF CONTENTS List of Acronyms and Abbreviations............................................................................................. vi Chemicals and Units of Measure ................................................................................................. ix Conversion Chart ......................................................................................................................... xi Metric Prefixes .............................................................................................................................xii

139

Plant Support Engineering: Guidance for the Replacement of Large Electric Motors at Nuclear Power Plants  

Science Conference Proceedings (OSTI)

The purpose of this report is to prepare a primary source of guidance for a project manager who is coordinating a team of plant personnel tasked with replacing a large electric motor. The report provides a generic process that describes interfaces and key steps necessary to ensure that the motor is evaluated and replaced in the most cost-effective and efficient means possible. The report also provides guidance regarding the typical composition of the project team and demonstrates how performance of their...

2010-03-15T23:59:59.000Z

140

Test of Polymer Electrolyte Membrane Fuel Cell / Uninterruptible Power Supply for Electric Utility Battery Replacement Markets  

Science Conference Proceedings (OSTI)

A sub-scale polymer electrolyte membrane (PEM) fuel cell/capacitor uninterruptible power supply (UPS) was designed and constructed based on previous research. Testing of this sub-scale UPS as a replacement for existing battery systems is documented in this report. The project verified that the PEM fuel cells, coupled with an ultracapacitor, could functionally replace batteries used for emergency power at electric generating stations. Remaining steps to commercialization include continuing market research...

2001-12-18T23:59:59.000Z

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

10 CFR 830 Major Modification Determination for Emergency Firewater Injection System Replacement  

SciTech Connect

The continued safe and reliable operation of the ATR is critical to the Department of Energy (DOE) Office of Nuclear Energy (NE) mission. While ATR is safely fulfilling current mission requirements, a variety of aging and obsolescence issues challenge ATR engineering and maintenance personnels capability to sustain ATR over the long term. First documented in a series of independent assessments, beginning with an OA Environmental Safety and Health Assessment conducted in 2003, the issues were validated in a detailed Material Condition Assessment (MCA) conducted as a part of the ATR Life Extension Program in 2007.Accordingly, near term replacement of aging and obsolescent original ATR equipment has become important to ensure ATR capability in support of NEs long term national missions. To that end, a mission needs statement has been prepared for a non-major system acquisition which is comprised of three interdependent sub-projects. The first project will replace the existent diesel-electrical bus (E-3), switchgear, and the fifty year old antiquated marine diesels with commercial power that is backed with safety-related emergency diesel generators (EDGs), switchgear, and uninterruptible power supply. The second project will replace the four, obsolete, original primary coolant pumps and motors. The third project, the subject of this major modification determination, will replace the current emergency firewater injection system (EFIS). The replacement water injection system will function as the primary emergency water injection system with the EFIS being retained as a defense-in-depth backup. Completion of this and the two other age-related projects (replacement of the ATR diesel bus (E-3) and switchgear and replacement of the existent aged primary coolant pumps and motors) will resolve major age-related operational issues plus make a significant contribution in sustaining the ATR safety and reliability profile. The major modification criteria evaluation of the project pre-conceptual design identified several issues that lead to the conclusion that the project is a major modification.

Noel Duckwitz

2011-05-01T23:59:59.000Z

142

Microsoft Word - CX Mid Way - Grand View Wood Pole Replacement-KEP.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

27, 2010 27, 2010 REPLY TO ATTN OF: KEP-4 SUBJECT: Environmental Clearance Memorandum Terry Kugler Lineman Foreman III - TFWF/Schultz Proposed Action: Replacing 11 wood pole structures on the Midway - Grandview transmission line and 12 wood pole structures on the Grandview - Red Mountain transmission line. PP&A Project No.: 1522 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): * B1.3 Routine maintenance activities for structures, rights-of-way, infrastructures (such as roads), are required to maintain infrastructures in a condition suitable for a facility to be used for its designed purpose. Routine maintenance may result in replacement to the extent that replacement is in kind and is not a substantial upgrade or improvement. In kind

143

NREL: Biomass Research - Marine Corps Taps NREL to Help Replace Aging Steam  

NLE Websites -- All DOE Office Websites (Extended Search)

Marine Corps Taps NREL to Help Replace Aging Steam Plant with Efficient Marine Corps Taps NREL to Help Replace Aging Steam Plant with Efficient Biomass Cogeneration January 30, 2013 The 1940s central steam plant at the Marine Corps Recruiting Depot (MCRD) on Parris Island, seven miles south of Beaufort, South Carolina, has far exceeded its projected life and is no longer cost-effective to operate. MCRD staff tasked NREL to help replace this artifact with an efficient biomass cogeneration facility. NREL will assess needs and help develop a request for proposal for designing and constructing the new facility. After the initial site review, the NREL assessment team will: Verify existing resources and biomass costs Optimize facility size and location Model the entire system and generate a process flow diagram Estimate costs and create an economic evaluation

144

Study: Algae Could Replace 17% of U.S. Oil Imports | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Study: Algae Could Replace 17% of U.S. Oil Imports Study: Algae Could Replace 17% of U.S. Oil Imports Study: Algae Could Replace 17% of U.S. Oil Imports April 13, 2011 - 6:30pm Addthis Algae samples back at the NREL lab, ready to be analyzed and run through the Fluorescent-Activated Cell Sorter, or FACS, which separates the cells. | Credit: NREL Staff Photographer Dennis Schroeder. Algae samples back at the NREL lab, ready to be analyzed and run through the Fluorescent-Activated Cell Sorter, or FACS, which separates the cells. | Credit: NREL Staff Photographer Dennis Schroeder. Niketa Kumar Niketa Kumar Public Affairs Specialist, Office of Public Affairs Every day, the United States spends about $1 billion to import foreign oil, money that we could be investing in American energy and the American economy. President Obama recently announced an ambitious but achievable

145

Microsoft Word - CX-FY10_Bingen_UFLS_Relay_Replacement_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cleareance Memorandum Cleareance Memorandum Cherilyn C. Randall Electrical Engineer - TPC-TPP-4 Proposed Action: Replace under frequency load shedding (UFLS) relay at Klickitat County PUD's No. 1 (KPUD) Bingen Substation PP&A Project No: 1720 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance activities...for structures, rights-of-way, infrastructures such as roads, equipment... routine maintenance activities, corrective....are required to maintain...infrastructures...in a condition suitable for a facility to be used for its designed purpose... replace outmoded components. Location: Bingen, Washington. Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA proposes to replace an outdated and obsolete UFLS

146

The How's and Why's of Replacing the Whole Barrel | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The How's and Why's of Replacing the Whole Barrel The How's and Why's of Replacing the Whole Barrel The How's and Why's of Replacing the Whole Barrel October 19, 2011 - 4:09pm Addthis A 42-U.S. gallon barrel of crude oil yields about 45 gallons of petroleum products. Source: Energy Information Administration, “Oil: Crude Oil and Petroleum Products Explained” and Annual Energy Outlook 2009 (Updated February 2010). A 42-U.S. gallon barrel of crude oil yields about 45 gallons of petroleum products. Source: Energy Information Administration, "Oil: Crude Oil and Petroleum Products Explained" and Annual Energy Outlook 2009 (Updated February 2010). Paul Bryan Biomass Program Manager, Office of Energy Efficiency & Renewable Energy For many, a barrel of oil is almost synonymous with its most prominent

147

NREL: Technology Transfer - Marine Corps Taps NREL to Help Replace Aging  

NLE Websites -- All DOE Office Websites (Extended Search)

Marine Corps Taps NREL to Help Replace Aging Steam Plant with Efficient Marine Corps Taps NREL to Help Replace Aging Steam Plant with Efficient Biomass Cogeneration January 30, 2013 The 1940s central steam plant at the Marine Corps Recruiting Depot (MCRD) on Parris Island, seven miles south of Beaufort, South Carolina, has far exceeded its projected life and is no longer cost-effective to operate. MCRD staff tasked NREL to help replace this artifact with an efficient biomass cogeneration facility. NREL will assess needs and help develop a request for proposal for designing and constructing the new facility. After the initial site review, the NREL assessment team will: Verify existing resources and biomass costs Optimize facility size and location Model the entire system and generate a process flow diagram Estimate costs and create an economic evaluation

148

NREL: Technology Deployment - Marine Corps Taps NREL to Help Replace Aging  

NLE Websites -- All DOE Office Websites (Extended Search)

Marine Corps Taps NREL to Help Replace Aging Steam Plant with Efficient Marine Corps Taps NREL to Help Replace Aging Steam Plant with Efficient Biomass Cogeneration January 30, 2013 The 1940s central steam plant at the Marine Corps Recruiting Depot (MCRD) on Parris Island, seven miles south of Beaufort, South Carolina, has far exceeded its projected life and is no longer cost-effective to operate. MCRD staff tasked NREL to help replace this artifact with an efficient biomass cogeneration facility. NREL will assess needs and help develop a request for proposal for designing and constructing the new facility. After the initial site review, the NREL assessment team will: Verify existing resources and biomass costs Optimize facility size and location Model the entire system and generate a process flow diagram Estimate costs and create an economic evaluation

149

Evaluation of safe-end weld materials and safe-end replacement experience  

Science Conference Proceedings (OSTI)

The first objective of this program was to review BWR operating plant fabrication drawings and weld procedures to determine weld materials used in recirculation safe end to nozzle joints and safe end nozzle welds. The second objective of this program was to characterize the recirculation safe end replacement activities at five operating BWR's; Duane Arnold, Monticello, Nine Mile Point-1, Santa Maria de Garona (Nuclenor), and Pilgrim. For each plant, discussion was provided to characterize safe end removal, replacement safe end design, and safe end installation. Special procedures used to aid any of the tasks or to repair weld butters were discussed. Specifically, for all plants, low carbon type 316 stainless steel was used for the replacement safe ends except for Duane Arnold where Alloy 600 was used. 51 figs.

Carnahan, R.A.; Horn, R.M.

1986-02-01T23:59:59.000Z

150

Dry Pipe Sprinkler Piping Replacement Project (4588), 4/30/2012  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Pipe System Sprinkler Piping Replacement Projects (4588) Pipe System Sprinkler Piping Replacement Projects (4588) Program or Field Office: Y-12 Site Office Location(s) (City/County/State): Oak Ridge, Anderson County, Tennessee Proposed Action Description: Submit by E-mail The proposed action is to replace sections of dry pipe system sprinkler piping which include heads, hangers, fittings, and valves. Categorical Exclusion(s) Applied: 81.3- Routine maintenance For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of I 0 CFR Part I 021. Regulatory Requirements in 10 CFR 1021.410(b): (See full text in regulation) [{Jrhe proposal fits within a class of actions that is listed in Appendix A orB to 10 CFR Part 1021, Subpart D.

151

Environmental Assessment for the Replacement Source of Steam for A Area at the Savannah River Site  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8 8 OCTOBER 2006 U. S. DEPARTMENT OF ENERGY SAVANNAH RIVER OPERATIONS OFFICE SAVANNAH RIVER SITE ENVIRONMENTAL ASSESSMENT FOR THE REPLACEMENT SOURCE OF STEAM FOR A AREA AT THE SAVANNAH RIVER SITE DOE/EA-1568 ENVIRONMENTAL ASSESSMENT FOR THE REPLACEMENT SOURCE OF STEAM FOR A AREA AT THE SAVANNAH RIVER SITE OCTOBER 2006 U. S. DEPARTMENT OF ENERGY SAVANNAH RIVER OPERATIONS OFFICE SAVANNAH RIVER SITE ii TABLE OF CONTENTS Page 1.0 INTRODUCTION ...............................................................................................1 1.1 Background ..............................................................................................1 1.2 Purpose and Need for Proposed Action.....................................................1 2.0 PROPOSED ACTION AND ALTERNATIVES

152

The Radioactive Liquid Waste Treatment Facility Replacement Project at Los Alamos National Laboratory  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Radioactive Liquid Waste Radioactive Liquid Waste Treatment Facility Replacement Project at Los Alamos National Laboratory OAS-L-13-15 September 2013 Department of Energy Washington, DC 20585 September 26, 2013 MEMORANDUM FOR THE ASSOCIATE ADMINISTRATOR FOR ACQUISITION AND PROJECT MANAGEMENT MANAGER LOS ALAMOS FIELD OFFICE FROM: David Sedillo Western Audits Division Office of Inspector General SUBJECT: INFORMATION: Audit Report on "The Radioactive Liquid Waste Treatment Facility Replacement Project at Los Alamos National Laboratory" BACKGROUND The Department of Energy's Los Alamos National Laboratory (Los Alamos) is a Government- owned, contractor operated Laboratory that is part of the National Nuclear Security Administration's (NNSA) nuclear weapons complex. Los Alamos' primary responsibility is to

153

Evaluation of Safe-End Weld Materials and Safe-End Replacement Experience  

Science Conference Proceedings (OSTI)

Alloy 182 is susceptible to stress corrosion cracking when used to weld recirculation safe ends to pressure vessel nozzles in BWRs. This research, which found alloy 182 welds in 14 of 24 U.S. BWRs, documented the procedures and materials used for replacing damaged safe ends at five plants.

1986-02-11T23:59:59.000Z

154

GREEN LIVING Replace incandencent and halogen light bulbs with LED and CLFs  

E-Print Network (OSTI)

GREEN LIVING GUIDE ENERGY TRAVEL FOOD sustain yosef WATER Replace incandencent and halogen light bulbs with LED and CLFs TURN YOUR COMPUTER OFF! Any time you will be gone for an hour or more for your laundry RESIST THAT SWITCH! Use natural light during the day, and no lights when you are gone USE

Thaxton, Christopher S.

155

Hurricane Eyewall Replacement Cycle Thermodynamics and the Relict Inner Eyewall Circulation  

Science Conference Proceedings (OSTI)

Flight-level aircraft data are used to examine inner-core thermodynamic changes during eyewall replacement cycles (ERCs) and the role of the relict inner eyewall circulation on the evolution of a hurricane during and following an ERC. Near the end ...

Matthew Sitkowski; James P. Kossin; Christopher M. Rozoff; John A. Knaff

2012-12-01T23:59:59.000Z

156

HPS replacement project drives garage costs down. [High-pressure sodium luminaires  

SciTech Connect

The high cost of energy had forced a four-story New York airport parking garage to turn off almost half its low bay lights, leaving it gloomy and vandal-prone. By replacing the original lamps with high-pressure sodium (HPS) luminaires, the garage brightened its image with 2400 fewer fixtures and netted an annual energy savings of $60,000.

Not Available

1985-09-01T23:59:59.000Z

157

Measure Guideline: Replacing Single-Speed Pool Pumps with Variable Speed Pumps for Energy Savings  

Science Conference Proceedings (OSTI)

The report evaluates potential energy savings by replacing traditional single-speed pool pumps with variable speed pool pumps, and provide a basic cost comparison between continued uses of traditional pumps verses new pumps. A simple step-by-step process for inspecting the pool area and installing a new pool pump follows.

Hunt, A.; Easley, S.

2012-05-01T23:59:59.000Z

158

The feasibility of replacing or upgrading utility distribution transformers during routine maintenance  

SciTech Connect

It is estimated that electric utilities use about 40 million distribution transformers in supplying electricity to customers in the United States. Although utility distribution transformers collectively have a high average efficiency, they account for approximately 61 billion kWh of the 229 billion kWh of energy lost annually in the delivery of electricity. Distribution transformers are being replaced over time by new, more efficient, lower-loss units during routine utility maintenance of power distribution systems. Maintenance is typically not performed on units in service. However, units removed from service with appreciable remaining life are often refurbished and returned to stock. Distribution transformers may be removed from service for many reasons, including failure, over- or underloading, or line upgrades such as voltage changes or rerouting. When distribution transformers are removed from service, a decision must be made whether to dispose of the transformer and purchase a lower-loss replacement or to refurbish the transformer and return it to stock for future use. This report contains findings and recommendations on replacing utility distribution transformers during routine maintenance, which is required by section 124(c) of the Energy Policy Act of 1992. The objectives of the study are to evaluate the practicability, cost-effectiveness, and potential energy savings of replacing or upgrading existing transformers during routine utility maintenance and to develop recommendations on was to achieve the potential energy savings.

Barnes, P.R.; Van Dyke, J.W.; McConnell, B.W.; Cohn, S.M.; Purucker, S.L.

1995-04-01T23:59:59.000Z

159

10 CFR 830 Major Modification Determination for the ATR Diesel Bus (E-3) and Switchgear Replacement  

SciTech Connect

Near term replacement of aging and obsolescent original ATR equipment has become important to ensure ATR capability in support of NEs long term national missions. To that end, a mission needs statement has been prepared for a non-major system acquisition which is comprised of three interdependent subprojects. The first project, subject of this determination, will replace the existent diesel-electrical bus (E-3) and associated switchgear. More specifically, INL proposes transitioning ATR to 100% commercial power with appropriate emergency backup to include: Provide commercial power as the normal source of power to the ATR loads currently supplied by diesel-electric power. Provide backup power to the critical ATR loads in the event of a loss of commercial power. Replace obsolescent critical ATR power distribution equipment, e.g., switchgear, transformers, motor control centers, distribution panels. Completion of this and two other age-related projects (primary coolant pump and motor replacement and emergency firewater injection system replacement) will resolve major age related operational issues plus make a significant contribution in sustaining the ATR safety and reliability profile. The major modification criteria evaluation of the project pre-conceptual design identified several issues make the project a major modification: 1. Evaluation Criteria #2 (Footprint change). The addition of a new PC-4 structure to the ATR Facility to house safety-related SSCs requires careful attention to maintaining adherence to applicable engineering and nuclear safety design criteria (e.g., structural qualification, fire suppression) to ensure no adverse impacts to the safety-related functions of the housed equipment. 2. Evaluation Criteria #3 (Change of existing process). The change to the strategy for providing continuous reliable power to the safety-related emergency coolant pumps requires careful attention and analysis to ensure it meets a project primary object to maintain or reduce CDF and does not negatively affect the efficacy of the currently approved strategy. 3. Evaluation Criteria #5 (Create the need for new or revised safety SSCs). The change to the strategy for providing continuous reliable power to the safety-related emergency coolant pumps, based on the pre-conceptual design, will require the addition of two quick start diesel generators, their associated power coordination/distribution controls, and a UPS to the list of safety-related SSCs. Similarly to item 1 above, the addition of these active SSCs to the list of safety-related SSCs and replacement of the E-3 bus requires careful attention to maintaining adherence to applicable engineering and nuclear safety design criteria (e.g., seismic qualification, isolation of redundant trains from common fault failures) to ensure no adverse impacts to the safety-related functions.

Noel Duckwtiz

2011-05-01T23:59:59.000Z

160

Microsoft Word - CX-Hatwai-DworshakSpacerReplacementFY12_WEB.docx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 24, 2012 REPLY TO ATTN OF: KEP-4 SUBJECT: Environmental Clearance Memorandum Frank Weintraub Project Manager - TEP-TPP-1 Proposed Action: 2012 Spacer and Insulator Replacement Program; Hatwai-Dworshak No. 1 500-kilovolt (kV) Transmission Line Spacer Replacement Project Budget Information: Work Order #00255064 PP&A Project No.: PP&A 1899 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3, Routine maintenance Proposed by: Bonneville Power Administration (BPA) Location: The proposed Hatwai-Dworshak No. 1 500-kV transmission line project is located in Clearwater and Nez Perce counties, Idaho, in BPA's Spokane Operations and Maintenance District. Townships, Ranges, and Sections crossed by the proposed project are listed Table 1:

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

L-Prize Competition Winner 60W Incandescent Replacement Lamp Update  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Interagency Technology Deployment Working Group L Prize ® Competition Winner 60W Incandescent Replacement Lamp Update James E. Rannels, Senior Advisor L Prize Competition D&R International March 15, 2012 Cost of electricity 1 cent per kilowatt-hour The Washington Post, March 8, 2012 Page One 2 Cost of electricity 11 cents per kilowatt-hour The Washington Post, March 9, 2012 Page Two 3 What Is the L Prize? * Technology competition to spur innovation and exceptional performance * Created by Energy Independence and Security Act (EISA 2007) Sec. 655 * Two key lamp replacements: 60W Incandescent and PAR 38 Halogen * Future focus: 21 st Century Lamp * Cash prizes, federal purchasing, utility programs 4 Philips Wins First L Prize * August 3, 2011: Philips

162

Microsoft Word - CX-UnderwoodTapStructureReplacementFY13_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

KEP-Celilo SUBJECT: Environmental Clearance Memorandum Scott Williams Line Foreman III - TFDF-The Dalles Proposed Action: Structure replacement and access road maintenance on Bonneville Power Administration's (BPA) Underwood Tap transmission line PP&A Project No.: 2683 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B4.6 Additions and modifications to transmission facilities Location: Skamania County, Washington Line Corridor Structures TRS County, State Underwood Tap 115-kV Line 26/12, 26/13 and 26/14 3N, 10E, Section 15 Skamania, Washington Proposed by: BPA Description of the Proposed Action: BPA proposes to replace deteriorating wood poles and associated structural/electrical components (e.g. cross arms, insulators, guy anchors, etc.) along the

163

Microsoft Word - CX_Maupin-TyghValley_PoleReplacement_FY12_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2012 , 2012 REPLY TO ATTN OF: KEP-4 SUBJECT: Environmental Clearance Memorandum Richard Heredia Supervisory Civil Engineer - TEP-TPP-1 Proposed Action: Maupin-Tygh Valley #1 Pole Replacement Project Budget Information: Work Order #00297894 PP&A Project No.: 2196 Categorical Exclusions Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3, Routine maintenance Proposed by: Bonneville Power Administration (BPA) Location: Project activities would take place in Wasco County, Oregon, T04S R14E S20 Description of the Proposed Action: BPA proposes to replace one aged and unsound wood pole structure (structure 3/2) on the BPA Maupin-Tygh Valley #1 transmission line. The new structure would be placed in the same location and have the same appearance as the old

164

L-Prize Competition Winner 60W Incandescent Replacement Lamp Update  

NLE Websites -- All DOE Office Websites (Extended Search)

Interagency Technology Deployment Working Group L Prize ® Competition Winner 60W Incandescent Replacement Lamp Update James E. Rannels, Senior Advisor L Prize Competition D&R International March 15, 2012 Cost of electricity 1 cent per kilowatt-hour The Washington Post, March 8, 2012 Page One 2 Cost of electricity 11 cents per kilowatt-hour The Washington Post, March 9, 2012 Page Two 3 What Is the L Prize? * Technology competition to spur innovation and exceptional performance * Created by Energy Independence and Security Act (EISA 2007) Sec. 655 * Two key lamp replacements: 60W Incandescent and PAR 38 Halogen * Future focus: 21 st Century Lamp * Cash prizes, federal purchasing, utility programs 4 Philips Wins First L Prize * August 3, 2011: Philips

165

Microsoft Word - CX-FY10_Ross-VanShip_Wood_Pole_Replacement_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Clearance Memorandum Clearance Memorandum Troy Dalrymple Lineman Foreman I - TFVK-LMT Proposed Action: Wood pole replacement of Ross-Vancouver Shipyard No. 1, Structure 2/3 in Fog Chamber Dump Area #2 PP&A Project No: 1721 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance activities...for structures, rights-of-way, infrastructures such as roads, equipment... routine maintenance activities, corrective....are required to maintain...infrastructures...in a condition suitable for a facility to be used for its designed purpose. Location: Ross Complex, Vancouver, WA. Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA proposes to replace deteriorating wood poles and associated structural/electrical components (e.g. cross arms, insulators, guy anchors) on

166

Microsoft Word - Grand Coulee Transmission Line Replacement Project Prelim EA.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Grand Coulee's Third Powerplant 500-kilovolt Transmission Line Replacement Project Preliminary Environmental Assessment May 2011 DOE/EA-1679 Agency Proposing Action. U.S. Bureau of Reclamation is the lead NEPA agency. The Bonneville Power Administration is assisting Reclamation through project design, environmental review and construction, if the Proposed Action is taken. Action. Reclamation is proposing to replace the six, 500- kV transmission lines of the Third Powerplant (TPP) at Grand Coulee Dam. The transmission lines are presently installed within the dam and a two-chambered tunnel that leads to a Spreader Yard about a mile away. Purpose and Need. The TPP's six generators and transmission lines are critical to the regional power supply.

167

Construction and operation of replacement hazardous waste handling facility at Lawrence Berkeley Laboratory. Environmental Assessment  

Science Conference Proceedings (OSTI)

The US Department of Energy (DOE) has prepared an environmental assessment (EA), DOE/EA-0423, for the construction and operation of a replacement hazardous waste handling facility (HWHF) and decontamination of the existing HWHF at Lawrence Berkeley Laboratory (LBL), Berkeley, California. The proposed facility would replace several older buildings and cargo containers currently being used for waste handling activities and consolidate the LBL`s existing waste handling activities in one location. The nature of the waste handling activities and the waste volume and characteristics would not change as a result of construction of the new facility. Based on the analysis in the EA, DOE has determined that the proposed action would not constitute a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969, 42 USC. 4321 et seq. Therefore, an environmental impact statement is not required.

Not Available

1992-09-01T23:59:59.000Z

168

Microsoft Word - CX-Monroe-Snohomish-ExpandedConductorReplacement_FY13_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 13, 2013 June 13, 2013 REPLY TO ATTN OF: KEPR-Covington SUBJECT: Environmental Clearance Memorandum Frank Weintraub Mechanical Engineer - TEP-TPP-1 Proposed Action: Replacement of expanded conductor from Bonneville Power Administration's (BPA) Monroe Substation to structure 2/1 on the Monroe-Snohomish transmission line PP&A Project No.: 2682 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B4.6 Additions/ modifications to transmission facilities Location: Snohomish County, Washingto.n, in BPA's Snohomish District Proposed by: BPA Description of the Proposed Action: BPA proposes to replace 2.5 inch expanded conductor from Monroe Substation to structure 2/1 on the Monroe-Snohomish 230-kilovolt transmission

169

Nondestructive Evaluation: Risk-Informed In-Service Repair and Replacement: Draft Methodology  

Science Conference Proceedings (OSTI)

Code Case N-660, Revision 0, "Risk-Informed Safety Classification for Use in Risk-Informed Repair/Replacement Activities," was published by ASME and was developed to expand the breadth of risk-informed Section XI requirements to pressure boundary components. This report provides a generic draft methodology and technical basis for revisions to N-660 for Class 2 and 3 systems based on lessons learned from pilot application to Arkansas Nuclear One (ANO), Unit 2.

2009-12-23T23:59:59.000Z

170

Plant Support Engineering: Guidance for Planned Replacement of Large Power Transformers at Nuclear Power Plants  

Science Conference Proceedings (OSTI)

Utilities continue to pursue license renewal applications and power uprates, and these initiatives are being undertaken on an aging fleet of nuclear plants. Many plants are facing the necessity of replacing large power transformers to support these initiatives. However, industry expertise to support such activities has diminished since the days of plant construction8212there are fewer qualified vendors and equipment manufacturers, materials and standards might have changed, and licensees are typically no...

2007-11-02T23:59:59.000Z

171

Plant Support Engineering: Guidance for Replacing Inverters and Battery Chargers at Nuclear Power Plants  

Science Conference Proceedings (OSTI)

Utilities are continuing to pursue license renewal applications and power uprates, and these initiatives are being undertaken on an aging fleet of nuclear plants. Many plants must replace inverters and battery chargers to support these initiatives. However, industry expertise to support such activities has diminished since the days of plant constructionthere are fewer qualified vendors and equipment manufacturers, materials have changed in many cases, and licensees are typically not currently staffed for...

2008-10-29T23:59:59.000Z

172

ECONOMIC ANALYSIS OF REPLACEMENT CORES FOR SM AND PM TYPE REACTORS  

SciTech Connect

An economic analysis is presented for the fabrication of replacement cores for SM and PM type reactors, including analysis of various core types and core fabrication technologies. The analysis indicates that major savings are possible by utilizing Type 3 cores (40-mil plates, 25 wt% UO/sub 2/, welded assembly) in all SM and PM type reactors, and that significant savings are possible by multiple core procurement and reprocessing, and relaxation of cobalt and tantalum requirements in Type 347 stainless steel. (auth)

Wilder, A.S.

1961-10-01T23:59:59.000Z

173

Plant Support Engineering: Guidance for Replacing Feedwater Heaters at Nuclear Power Plants  

Science Conference Proceedings (OSTI)

Utilities continue to pursue license renewal applications and power uprates, and these initiatives are being undertaken in an aging fleet of nuclear plants. Many plants are facing the necessity of replacing feedwater heaters to support these initiatives. However, industry expertise to support such activities has diminished since the days of plant construction8212there are fewer qualified vendors and equipment manufacturers, materials might have changed, and licensees are typically not staffed for these m...

2007-07-26T23:59:59.000Z

174

Economic and Conservation Evaluation of Capital Renovation Projects: Edinburg Irrigation District Hidalgo County No. 1 - 72" Pipeline Replacing Delivery Canal and Multi-Size Pipeline Replacing Delivery Canal  

E-Print Network (OSTI)

Initial construction costs and net annual changes in operating and maintenance expenses are identified for the capital renovation project proposed by Edinburg Irrigation District Hidalgo County No. 1 to the North American Development Bank (NADBank). Both nominal and real, expected economic and financial costs of water and energy savings are identified throughout the anticipated useful lives for both components of the proposed project (i.e., 72" pipeline replacing a segment of delivery canal along the "Curry Main" and multi-size pipeline replacing a segment of delivery canal along the "North Branch / East Main"). Sensitivity results for both the cost of water savings and cost of energy savings are presented for several important parameters. Expected cost of water savings and cost of energy savings for both components are aggregated into a composite set of cost measures for the total proposed project. Aggregate cost of water savings is estimated to be $29.87 per ac-ft and energy savings are measured at an aggregate value of $0.0000595 per BTU (i.e., $0.203 per kwh). In addition, expected values are indicated for the Bureau of Reclamation's three principal evaluation measures specified in the United States Public Law 106-576 legislation. The aggregate initial construction cost per ac-ft of water savings measure is $50.90 per ac-ft of water savings. The aggregate initial construction cost per BTU (kwh) of energy savings measure is $0.0000777 per BTU ($0.265 per kwh). The ratio of initial construction costs per dollar of total annual economic savings is estimated to be -2.01.

Rister, M. Edward; Lacewell, Ronald D.; Sturdivant, Allen W.; Robinson, John R.C.; Popp, Michael C.; Ellis, John R.

2002-11-01T23:59:59.000Z

175

An opposite view data replacement approach for reducing artifacts due to metallic dental objects  

SciTech Connect

Purpose: To present a conceptually new method for metal artifact reduction (MAR) that can be used on patients with multiple objects within the scan plane that are also of small sized along the longitudinal (scanning) direction, such as dental fillings. Methods: The proposed algorithm, named opposite view replacement, achieves MAR by first detecting the projection data affected by metal objects and then replacing the affected projections by the corresponding opposite view projections, which are not affected by metal objects. The authors also applied a fading process to avoid producing any discontinuities in the boundary of the affected projection areas in the sinogram. A skull phantom with and without a variety of dental metal inserts was made to extract the performance metric of the algorithm. A head and neck case, typical of IMRT planning, was also tested. Results: The reconstructed CT images based on this new replacement scheme show a significant improvement in image quality for patients with metallic dental objects compared to the MAR algorithms based on the interpolation scheme. For the phantom, the authors showed that the artifact reduction algorithm can efficiently recover the CT numbers in the area next to the metallic objects. Conclusions: The authors presented a new and efficient method for artifact reduction due to multiple small metallic objects. The obtained results from phantoms and clinical cases fully validate the proposed approach.

Yazdi, Mehran; Lari, Meghdad Asadi; Bernier, Gaston; Beaulieu, Luc [Department of Electrical Engineering, School of Engineering, Shiraz University, Shiraz 7134851154 (Iran, Islamic Republic of) and Departement de Radio-Oncologie, Ho circumflex tel-Dieu de Quebec, Centre Hospitalier Universitaire de Quebec, 11 Cote du Palais, Quebec, Quebec G1R 2J6 (Canada); Department of Electrical Engineering, School of Engineering, Shiraz University, Shiraz 7134851154 (Iran, Islamic Republic of); Departement de Radio-Oncologie, Ho circumflex tel-Dieu de Quebec, Centre Hospitalier Universitaire de Quebec, 11 Cote du Palais, Quebec, Quebec G1R 2J6 (Canada); Departement de Physique, de Genie Physique et D'optique, Universite Laval, Quebec, Quebec (Canada) and Departement de Radio-Oncologie, Hotel-Dieu de Quebec, Centre Hospitalier Universitaire de Quebec, 11 Cote du Palais, Quebec, Quebec G1R 2J6 (Canada)

2011-04-15T23:59:59.000Z

176

10 CFR 830 Major Modification Determination for Replacement of ATR Primary Coolant Pumps and Motors  

SciTech Connect

The continued safe and reliable operation of the ATR is critical to the Department of Energy (DOE) Office of Nuclear Energy (NE) mission. While ATR is safely fulfilling current mission requirements, a variety of aging and obsolescence issues challenge ATR engineering and maintenance personnels capability to sustain ATR over the long term. First documented in a series of independent assessments, beginning with an OA Environmental Safety and Health Assessment conducted in 2003, the issues were validated in a detailed Material Condition Assessment (MCA) conducted as a part of the ATR Life Extension Program in 2007.Accordingly, near term replacement of aging and obsolescent original ATR equipment has become important to ensure ATR capability in support of NEs long term national missions. To that end, a mission needs statement has been prepared for a non-major system acquisition which is comprised of three interdependent subprojects. The first project will replace the existent diesel-electrical bus (E-3), switchgear, and the 50-year-old obsolescent marine diesels with commercial power that is backed with safety related emergency diesel generators, switchgear, and uninterruptible power supply (UPS). The second project, the subject of this major modification determination, will replace the four, obsolete, original primary coolant pumps (PCPs) and motors. Completion of this and the two other age-related projects (replacement of the ATR diesel bus [E-3] and switchgear and replacement of the existent emergency firewater injection system) will resolve major age-related operational issues plus make a significant contribution in sustaining the ATR safety and reliability profile. The major modification criteria evaluation of the project pre-conceptual design identified several issues that lead to the conclusion that the project is a major modification: 1. Evaluation Criteria #3 (Change of existing process). The proposed strategy for equipping the replacement PCPs with VFDs and having the PCPs also function as ECPs will require significant safety basis changes requiring DOE approval. 2. Evaluation Criteria #4 (Use of new technology). The use of VFD and VFD pump catcher technology for the PCPs is not currently in use and has not been previously formally reviewed/approved by DOE for ATR. It is noted that VFD technology has several decades of commercial use and experience. However, the ATR probabilistic risk assessment will have to be updated, reflecting the changes for supplying ECP flows including VFD reliability, to confirm that the proposed activity maintains or reduces the CDF for the ATR. 3. Evaluation Criteria #5 (Create the need for new or revised safety SSCs). It is expected that the proposed activity will result in a revised list of safety-related SSCs. Specifically, as currently proposed, the existing ECPs will be deleted from the list. The PCPs and their associated components, picking up the ECP function, will be classified as safety-related active Seismic Category I.

Noel Duckwitz

2011-05-01T23:59:59.000Z

177

EIA - AEO2010 - U.S. nuclear power plants: Continued life or replacement  

Gasoline and Diesel Fuel Update (EIA)

U.S. nuclear power plants: continued life or replacement after 60? U.S. nuclear power plants: continued life or replacement after 60? Annual Energy Outlook 2010 with Projections to 2035 U.S. nuclear power plants: Continued life or replacement after 60? Background Nuclear power plants generate approximately 20 percent of U.S. electricity, and the plants in operation today are often seen as attractive assets in the current environment of uncertainty about future fossil fuel prices, high construction costs for new power plants (particularly nuclear plants), and the potential enactment of GHG regulations. Existing nuclear power plants have low fuel costs and relatively high power output. However, there is uncertainty about how long they will be allowed to continue operating. The nuclear industry has expressed strong interest in continuing the operation of existing nuclear facilities, and no particular technical issues have been identified that would impede their continued operation. Recent AEOs had assumed that existing nuclear units would be retired after 60 years of operation (the initial 40-year license plus one 20-year license renewal). Maintaining the same assumption in AEO2010, with the projection horizon extended to 2035, would result in the retirement of more than one-third of existing U.S. nuclear capacity between 2029 and 2035. Given the uncertainty about when existing nuclear capacity actually will be retired, EIA revisited the assumption for the development of AEO2010 and modified it to allow the continued operation of all existing U.S. nuclear power plants through 2035 in the Reference case.

178

10 CFR 830 Major Modification Determination for Advanced Test Reactor RDAS and LPCIS Replacement  

SciTech Connect

The replacement of the ATR Control Complex's obsolete computer based Reactor Data Acquisition System (RDAS) and its safety-related Lobe Power Calculation and Indication System (LPCIS) software application is vitally important to ensure the ATR remains available to support this national mission. The RDAS supports safe operation of the reactor by providing 'real-time' plant status information (indications and alarms) for use by the reactor operators via the Console Display System (CDS). The RDAS is a computer support system that acquires analog and digital information from various reactor and reactor support systems. The RDAS information is used to display quadrant and lobe powers via a display interface more user friendly than that provided by the recorders and the Control Room upright panels. RDAS provides input to the Nuclear Engineering ATR Surveillance Data System (ASUDAS) for fuel burn-up analysis and the production of cycle data for experiment sponsors and the generation of the Core Safety Assurance Package (CSAP). RDAS also archives and provides for retrieval of historical plant data which may be used for event reconstruction, data analysis, training and safety analysis. The RDAS, LPCIS and ASUDAS need to be replaced with state-of-the-art technology in order to eliminate problems of aged computer systems, and difficulty in obtaining software upgrades, spare parts, and technical support. The major modification criteria evaluation of the project design did not lead to the conclusion that the project is a major modification. The negative major modification determination is driven by the fact that the project requires a one-for-one equivalent replacement of existing systems that protects and maintains functional and operational requirements as credited in the safety basis.

David E. Korns

2012-05-01T23:59:59.000Z

179

Microsoft Word - CX-CircuitBreakerReplacementsMultipleSubstationsFY12_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

12, 2012 12, 2012 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Michael Gilchrist Project Manager - TEP-TPP-1 Proposed Action: Power Circuit Breaker Replacement Project Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): Appendix B4.6, Additions and modifications to transmission facilities. Location: Tumwater, Thurston County, WA; Ravensdale, King County, WA; Silver Creek, Lewis County, WA; Shelton, Mason County, WA; Bremerton, Kitsap County, WA; Bandon, Coos County, OR; Toledo, Lincoln County, OR; Wilsonville, Washington County, OR; Gold Beach, Curry County, OR; Stayton, Marion County, OR; Swan Valley, Bonneville County, ID; Moose, Teton County, WY (ID); Gold Creek, Powell County, MT.

180

KCP Activities Supporting the W76LEP Stress Cushions and LK3626 RTV Replacement Material Development  

SciTech Connect

The S-5370 RTV blown foam previously produced by Dow Corning is no longer commercially available. The S-5370 material has been used on all of Los Alamos National Laboratory (LANL) programs to manufacture Stress Cushions up through the W88. The Kansas City Plant (KCP) did not have a sufficient supply of S-5370 material to cover the schedule requirements for the Program. This report provides information on the numerous activities conducted at KCP involving the development of the Program Stress Cushion and replacement RTV material.

J. W. Schneider

2009-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Lumen Maintenance Testing of the Philips 60-Watt Replacement Lamp L Prize Entry  

Science Conference Proceedings (OSTI)

This paper describes testing conducted to evaluate the Philips' L Prize award winning 60-watt LED replacement product's ability to meet the lifetime/lumen maintenance requirement of the competition, which was: "having 70 percent of the lumen value under subparagraph (A) [producing a luminous flux greater than 900 lumens] exceeding 25,000 hours under typical conditions expected in residential use." A custom test apparatus was designed and constructed for this testing and a statistical approach was developed for use in evaluating the test results. This will be the only publicly available, third-party data set of long-term LED product operation.

Gordon, Kelly L.; Hafen, Ryan P.; Hathaway, John E.; McCullough, Jeffrey J.

2012-09-01T23:59:59.000Z

182

DOE/EA-1636: Albany-Burnt Woods and Santiam-Toledo Pole Replacement Project Mitigation Action Plan (March 2009)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Burnt Woods and Santiam-Toledo Pole Replacement Project Burnt Woods and Santiam-Toledo Pole Replacement Project DOE/EA-1636 Summary This Mitigation Action Plan (MAP) is part of the Finding of No Significant Impact (FONSI) for the Albany-Burnt Woods and Santiam-Toledo Pole Replacement Project. The project involves replacing wood pole structures on about 26 miles of the Albany-Burnt Woods single-circuit, 115- kilovolt (kV) transmission line and about 21 miles of the Santiam-Toledo single circuit, 230-kV transmission line in Linn, Benton and Lincoln counties, Oregon. This MAP is for the Proposed Action and includes all of the integral elements and commitments made in the Environmental Assessment (EA) to mitigate any potential adverse environmental impacts. The purpose of this MAP is to explain how the mitigation measures will be

183

Replace Pressure-Reducing Valves with Backpressure Turbogenerators (International Fact Sheet), Energy Tips-Steam, Steam Tip Sheet #20c  

SciTech Connect

This English/Chinese ITP steam tip sheet on replacing pressure-reducing valves provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

Not Available

2010-10-01T23:59:59.000Z

184

A decision-making framework to determine the value of on-orbit servicing compared to replacement of space telescopes  

E-Print Network (OSTI)

The Hubble Space Telescope has demonstrated that on-orbit servicing can provide significant benefits for scientific space programs. Specifically, servicing missions can replace failed components to keep spacecraft operational, ...

Baldesarra, Mark

2007-01-01T23:59:59.000Z

185

Study of the reaction rate of gold nanotube synthesis from sacrificial silver nanorods through the galvanic replacement method  

Science Conference Proceedings (OSTI)

An investigation was carried out about the gold nanotube synthesis via a galvanic replacement reaction. The progress of the gold nanotube synthesis was investigated using electron microscopy and UV-Vis spectroscopy. In addition, the reaction rates of ...

Sunil Kwon; Hyunbae Dong; Sang-Yup Lee

2010-01-01T23:59:59.000Z

186

Potential commercial application of a bi-layer bone-ligament regeneration scaffold to anterior cruciate ligament replacement  

E-Print Network (OSTI)

A business model was created in order to explore the commercial application of a bi-layer bone-ligament scaffold to the treatment of torn anterior cruciate ligaments (ACL) requiring replacement. The two main keys in producing ...

Li, Jessica C. (Jessica Ching-Yi)

2006-01-01T23:59:59.000Z

187

Assessment of Nuclear Safety Culture at the Los Alamos National Laboratory Chemistry and Metallurgy Research Replacement Project, April 2012  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Los Alamos National Laboratory Los Alamos National Laboratory Chemistry and Metallurgy Research Replacement Project May 2011 April 2012 Office of Safety and Emergency Management Evaluations Office of Enforcement and Oversight Office of Health, Safety and Security U.S. Department of Energy Independent Oversight Assessment of Nuclear Safety Culture at the Los Alamos National Laboratory Chemistry and Metallurgy Research Replacement Project Table of Contents 1. Introduction ........................................................................................................................................... 1 2. Scope and Methodology ....................................................................................................................... 2

188

Global warming and end-use efficiency implications of replacing CFCs  

SciTech Connect

The direct contribution of CFCs to calculated global warming has been recognized for some time. As a result of the international agreement to phase out CFCs due to stratospheric ozone and the ensuing search for suitable alternatives, there has recently been increased attention on the DIRECT global warming potential (GWP) of the fluorocarbon alternatives as greenhouse gases. However, to date there has been little focus on the INDIRECT global warming effect arising from end-use efficiency changes and associated CO{sub 2} emissions. A study being conducted at Oak Ridge National Laboratory (ORNL) addresses this combined or total global warming impact of viable options to replace CFCs in their major energy-related applications. This paper reviews selected results for air-conditioning, refrigeration, and heat pump applications. The analysis indicates that the CFC user industries have made substantial progress in approaching near-equal energy efficiency with the HCFC/HFC alternative refrigerants. The findings also bring into question the relative importance of the DIRECT (chemical-related) effect in many applications. Replacing CFCs is an important step in reducing the total global warming impact, and at present the HCFC and HFCS appear to offer the best efficiency and lowest total impact of options available in the relatively short time period required for the transition away from CFCs.

Fairchild, P.D.; Fischer, S.K.

1991-12-31T23:59:59.000Z

189

Should a coal-fired power plant be replaced or retrofitted?  

SciTech Connect

In a cap-and-trade system, a power plant operator can choose to operate while paying for the necessary emissions allowances, retrofit emissions controls to the plant, or replace the unit with a new plant. Allowance prices are uncertain, as are the timing and stringency of requirements for control of mercury and carbon emissions. We model the evolution of allowance prices for SO{sub 2}, NOx, Hg, and CO{sub 2} using geometric Brownian motion with drift, volatility, and jumps, and use an options-based analysis to find the value of the alternatives. In the absence of a carbon price, only if the owners have a planning horizon longer than 30 years would they replace a conventional coal-fired plant with a high-performance unit such as a supercritical plant; otherwise, they would install SO{sub 2} and NOx controls on the existing unit. An expectation that the CO{sub 2} price will reach $50/t in 2020 makes the installation of an IGCC with carbon capture and sequestration attractive today, even for planning horizons as short as 20 years. A carbon price below $40/t is unlikely to produce investments in carbon capture for electric power. 1 ref., 5 figs., 2 tabs.

Dalia Patino-Echeverri; Benoit Morel; Jay Apt; Chao Chen [Carnegie Mellon University, Pittsburgh, PA (USA)

2007-12-15T23:59:59.000Z

190

Analysis of the Repair vs. Replace Decision for Small AC Motors  

E-Print Network (OSTI)

This morning in the course of my discussion, I would like to cover how we at Westvaco were handling our motor replacement decisions, how we are handling them now and how we determined the costs and benefits of such a change. As you have already gathered, some of us feel there is some money to be saved through the purchase of high efficiency AC motors in the 1 to 250 HP range. Our analysis at Westvaco suggested to us that there is a great deal of money to be saved. You have heard this from the suppliers side, General Electric and Baldor, as well as from the users side, Owens-Corning Fiberglass. Speaking from the user's standpoint, Mr. Nester addressed many of the technical and economic considerations which go into the decision whether to buy a standard efficiency motor or a premium high efficiency motor. He also commented briefly on the repair/replace decision. This last point is the question we asked ourselves and the topic of my presentation today.

Chamberlain, P. F.

1984-01-01T23:59:59.000Z

191

ARM: Millimeter Wave Cloud Radar (MMCR), replaces mmcrcal and mmcrmoments datastreams following C-40 processor upgrade of 2003.09.09  

DOE Data Explorer (OSTI)

Millimeter Wave Cloud Radar (MMCR), replaces mmcrcal and mmcrmoments datastreams following C-40 processor upgrade of 2003.09.09

Kevin Widener; Nitin Bharadwaj; Karen Johnson

192

Microsoft Word - CX-Satsop-Aberdeen_Tower-Replacement_FY10_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0 0 REPLY TO ATTN OF: KEP-4 SUBJECT: Environmental Clearance Memorandum Erich Orth Project Manager - TEP-TPP-3 Proposed Action: Replacement of twenty 22-L structures on the Satsop-Aberdeen No. 2 230-kV Transmission Line PP&A Project No.: 1704 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance activities...for structures, rights-of-way, infrastructures such as roads, equipment... routine maintenance activities, corrective...are required to maintain...infrastructures...in a condition suitable for a facility to be used for its designated purpose. Location: The Project is located in Gray's Harbor County, Washington between the towns of Aberdeen and Central Park, Washington. The Project is located in the following sections:

193

Microsoft Word - CX-FY11PascoDistrictWoodPoleReplacement_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2011 1, 2011 REPLY TO ATTN OF: KEPR-PASCO SUBJECT: Environmental Clearance Memorandum Toby Cossairt Lineman Foreman III - TFPF-PASCO Proposed Action: Wood pole replacement and minor access road maintenance along various transmission line rights-of-way (ROW) in the Pasco District. The following lines will have pole change-outs in 2011: Benton-Scooteney #1, Benton-Othello #1, Franklin-Hedges #1, Franklin-Walla Walla #1, Grandview-Red Mountain #1, Franklin-Badger Canyon #2, Kennewick Tap to Franklin- Badger Canyon #2, McNary-Franklin #2, and White Bluffs-Richland #1. Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance activities...for structures, rights-of-way, infrastructures such as roads,

194

Replaces EIA-459F All Other Editions Are Obsolete OMB Control No.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 6 (10-94) Replaces EIA-459F All Other Editions Are Obsolete OMB Control No. 1910-0400 U.S. DEPARTMENT OF ENERGY FEDERAL ASSISTANCE PROGRAM/PROJECT STATUS REPORT Public reporting burden for this collection of information is estimated to average 47.5 hours per response, including the time for reviewing instructions, search- ing existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Office of Information Resources Management Policy, Plans, and Oversight, Records Management Division, HR-422 - GTN, Paperwork Reduction Project (1910-0400), U.S. Department of

195

Replaces EIA-459B U.S. DEPARTMENT OF ENERGY FEDERAL ASSISTANCE MILESTONE PLAN  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

(03-94) Replaces EIA-459B U.S. DEPARTMENT OF ENERGY FEDERAL ASSISTANCE MILESTONE PLAN OMB Control No. 1910-0400 Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Office of Information Resources Management Policy, Plans, and Oversight, Records Management Division, HR-422 - GTN, Paperwork Reduction Project (1910-0400), U.S. Department of Energy, 1000 Independence Avenue, S.W., Washington, DC 20585; and to the Office of Management and Budget (OMB), Paperwork Reduction Project (1910-0400), Washington, DC 20503.

196

Microsoft Word - CX-KalispellTLMDistrictFY11WoodPoleReplacement_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cleareance Memorandum Cleareance Memorandum Michael Stolfus Lineman Foreman III - TFKF-Kalispell Kurt Marsh Lineman Foreman I - TFKF-Kalispell Proposed Action: Wood pole replacement and minor access road maintenance along various transmission line rights-of-way in Bonneville Power Administration's (BPA) Kalispell District. PP&A Project No: 1839 (Garrison-Anaconda #1), 1840 (Hot Springs-Rattlesnake #1), 1841 (Rattlesnake-Garrison #1), 1842 (Columbia Falls-Kalispell #1), 1843 (Kalispell-Kerr #1), 1844 (Libby-Bonners Ferry #1), 1845 (Columbia Falls-Trego #1) Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance activities...for structures, rights of way, infrastructures such as roads, equipment... routine maintenance activities, corrective....are required to maintain...infrastructures...in a

197

DOEEA-1178 Assessment 300 Area Steam Plant Replacement, Hanford Site, Richland, Washington  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8 8 Assessment 300 Area Steam Plant Replacement, Hanford Site, Richland, Washington U.S. Department of Energy Washington, D.C. March 1997 , DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, make any warranty, express or implied, or assumes any legal liabili- ty or mponsibility for the accuracy, completeness, or usefulness of any information, appa- ratus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or s e m ' c e by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or

198

Microsoft Word - CX-PascoDistrictPoleReplacement_FY13_WEB.docx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 3 REPLY TO ATTN OF: KEPR/Pasco SUBJECT: Environmental Clearance Memorandum Greg Wilfong Lineman Foreman III - TFPF-PASCO Proposed Action: Wood pole replacement and minor access road maintenance along the Franklin-Badger Canyon #2 and Walla Walla-Pendleton #1 transmission line rights-of-way in the Pasco District. PP&A Project No.: 2655 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance activities Location: Franklin-Badger Canyon #2 and Walla Walla-Pendleton #1 transmission lines located within the Pasco District. See table below for structure locations on the corresponding transmission lines: Transmission Line/ROW Structure # Township Range Section County, State Franklin-Badger Canyon

199

Microsoft Word - CX-Drummond-MacksInn_WoodPoleReplacementFY12_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

10, 2012 10, 2012 REPLY TO ATTN OF: KEP-CELILO SUBJECT: Environmental Clearance Memorandum Mark Hadley Lineman Foreman III - TFIF-Idaho Falls Proposed Action: Wood pole replacements along the Drummond-Macks Inn, Macks Inn- Madison, and Targhee Tap 115-kV transmission line rights-of-way. PP&A Project Number: 2191 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance activities... Location: The project area is located in Bonneville Power Administration's (BPA) Idaho Falls District. Project locations are listed below: Project Location Township Range Section(s) County Line Name Structures Use Ownership 4N 45E 11 Teton Targhee Tap 8/8 Agriculture Private 14N 44E 22 Fremont Macks Inn- Madison

200

Microsoft Word - CX-EllensburgTLMDistrictFY11WoodPoleReplacement_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Clearance Memorandum Clearance Memorandum Terry Kugler Lineman Foreman III - TFWF-Schultz Joe Lauer Line Foreman I - TFWF-Schultz Proposed Action: Wood pole replacement and minor access road maintenance along portions of the Columbia-Valhalla #1 and #2 transmission line rights-of-way. PP&A Project No: 1851 (Columbia-Valhalla #1), 1852 (Columbia-Valhalla #2) Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance activities...for structures, rights of way, infrastructures such as roads, equipment... routine maintenance activities, corrective....are required to maintain...infrastructures...in a condition suitable for a facility to be used for its designed purpose. Location: The project area is located in Douglas and Chelan counties, Washington. Project

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Microsoft Word - CX-FY11WenatcheeDistrictWoodPoleReplacement_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4, 2011 4, 2011 REPLY TO ATTN OF: KEPR-PASCO SUBJECT: Environmental Clearance Memorandum Terry Kugler Lineman Foreman III - TFWF-SCHULTZ Proposed Action: Wood pole replacement and minor access road maintenance along various transmission line rights-of-way (ROW) in the Wenatchee District. The following lines will have pole change-outs in 2011: Chandler Tap, Grandview-Red Mt. #1 and Midway-Moxee #1. Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance activities...for structures, rights-of-way, infrastructures such as roads, equipment... routine maintenance activities, corrective....are required to maintain... infrastructures...in a condition suitable for a facility to be used for its designed purpose.

202

Microsoft Word - CX-FY10_Kalispell_District_Wood_Pole_Replacement_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6, 2010 6, 2010 REPLY TO ATTN OF: KEPR-Bell-1 SUBJECT: Environmental Cleareance Memorandum Michael Stolfus Lineman Foreman III - TFKF-Kalispell Proposed Action: Wood pole replacement and minor access road maintenance along various transmission line right-of-ways in the Kalispell District PP&A Project No: 1536 (Columbia Falls-Kalispell #1), 1537 (Anaconda-Silver Bow #1), 1538 (Columbia Falls-Trego #1), 1541 (Libby-Bonners Ferry #1), 1542 (Rattlesnake-Garrison #1) Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance activities...for structures, rights-of-way, infrastructures such as roads, equipment... routine maintenance activities, corrective....are required to maintain...infrastructures...in a

203

Microsoft Word - CX-SpokaneDistrictWoodPoleReplacementsFY13_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2013 1, 2013 REPLY TO ATTN OF: KEPR-Bell-1 SUBJECT: Environmental Clearance Memorandum Amanda Williams Project Manager - TEP-TPP-1 Proposed Action: 2013 Spokane District Wood Pole Replacement Projects PP&A Project No.: 2131 (Albeni Falls-Sand Creek No. 1), 2132 (Bronx-Sand Creek No. 1), 2492 (Albeni Falls-Pine Street No. 1), 2133 (Bell-Boundary No. 3), 2134 (Bell-Addy No. 1), 2135 (Bell-Trentwood No. 1), 2136 (Bell-Trentwood No. 2), 2137 (Libby-Bonners Ferry No. 1), 2493 (Boundary-Nelway #1), 2494 (Colville-Boundary #1), 1547 (Four Lakes Tap), 2138 (Green Bluff Tap), 2495 (Sand Creek-Bonners Ferry No. 1 and No. 2), and 1929 (Spirit Tap) Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance

204

Microsoft Word - CX-Minidoka-Unity_Wood PoleReplacementFY12_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2012 , 2012 REPLY TO ATTN OF: KEP-CELILO SUBJECT: Environmental Clearance Memorandum Mark Hadley Lineman Foreman III - TFIF-Idaho Falls Proposed Action: Wood pole replacement along the Minidoka Power House-Unity No. 1 and Unity-Heyburn No. 1, 138-kV transmission line rights-of-way. PP&A Project No.: 2192 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance activities...for structures, rights-of-way, infrastructures such as roads, equipment... routine maintenance activities, corrective....are required to maintain... infrastructures...in a condition suitable for a facility to be used for its designated purpose. Location: The project area is located in Cassia County, Idaho, in Bonneville Power

205

Building America Top Innovations 2013 Profile … Window Replacement, Rehabilitation, & Repair Guide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

are also discussed. are also discussed. Water infiltration is dealt with at considerable length because windows are one of the likeliest components in the building structure for water entry and because water intrusion and resultant damage may have gone on unnoticed for some time as water can enter the wall cavity through and around the window assembly. Suggestions for investigating sources of water intrusion are provided. The condition of the decorative trim around the window can be an indication of water damage but deterioration of the trim is typically an aesthetic problem not a performance problem. However, if the window sill is damaged, it should be replaced because it is the means by which water will drain out away from the house or, incorrectly, into the wall. Damaged or deteriorating window sashes, frames, or casings

206

PacifiCorp New Amended RFP Replacing May 2001, Issued Aug. 23, 2001  

NLE Websites -- All DOE Office Websites (Extended Search)

PacifiCorp PacifiCorp REQUEST FOR PROPOSAL FOR TRADABLE RENEWABLE CREDITS (GREEN TAGS, as defined herein) AND ASSOCIATED RETAIL MARKETING FOR OREGON PORTFOLIO BLENDED RENEWABLE AND/OR HABITAT MITIGATION OPTIONS NEW AMENDED RFP REPLACING MAY 2001 GREEN TAGS ONLY RFP ISSUE DATE: August 23, 2001 DUE DATE: At or before 2 p.m. PDT on Thursday, September 20, 2001 CONTACT: Roby Roberts PacifiCorp 825 NE Multnomah Avenue, Suite 600 Portland, Oregon 97232 503 813 - 5975 voice 503 813 - 6260 fax roby.roberts@pacificorp.com PacifiCorp Marketing and Green Tags RFP New Amended RFP August 23, 2001 Page 2 TABLE OF CONTENTS Section * REQUEST FOR PROPOSALS 1 * GENERAL PROCEDURES 2 * DEFINITIONS 3 * SCHEDULE 4 * EVALUATION 5 * DETAILED PROPOSAL REQUIREMENTS 6 * CONTENT OF RESPONSE 7 * DISCUSSIONS AND RIGHT TO REJECT PROPOSALS

207

Microsoft Word - CX-Drummond-MacksInn-WoodPoleReplacementFY13_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

29, 2012 29, 2012 REPLY TO ATTN OF: KEP-CELILO SUBJECT: Environmental Clearance Memorandum Mark Hadley Lineman Foreman III - TFIF-Idaho Falls Proposed Action: Wood pole replacements along the Drummond-Macks Inn, Macks Inn- Madison, and Swan Valley-Teton 115-kilovolt (kV) transmission line rights-of-way. PP&A Project Number: 2486 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance activities Location: The project area is located in Bonneville Power Administration's (BPA) Idaho Falls District. Project locations are listed below: Project Location Township Range Section(s) County Line Name Structures Use Ownership 3N 44E 28 Teton Swan Valley - Teton 10/6 Forest Forest Service 14S 5E 19 Fremont

208

Replaces EIA-459C All Other Editions Are Obsolete OMB Control No.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4600.4 4600.4 (04-94) Replaces EIA-459C All Other Editions Are Obsolete OMB Control No. 1910-0400 U.S. Department of Energy Federal Assistance Budget Information Public reporting burden for this collection of information is estimated to average 1.87 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Office of Information Resources Management Policy, Plans, and Oversight, Records Management Division, HR-422 - GTN, Paperwork Reduction Project (1910-0400), U.S. Department of Energy, 1000 Independence Avenue, S.W., Washington, DC 20585; and to the Office of Management and Budget (OMB), Paperwork

209

Building America Top Innovations 2013 Profile … Window Replacement, Rehabilitation, & Repair Guide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

such as working on scaffolding are also discussed. such as working on scaffolding are also discussed. Water infiltration is dealt with at considerable length because windows are one of the likeliest components in the building structure for water entry and because water intrusion and resultant damage may have gone on unnoticed for some time as water can enter the wall cavity through and around the window assembly. Suggestions for investigating sources of water intrusion are provided. The condition of the decorative trim around the window can be an indication of water damage but deterioration of the trim is typically an aesthetic problem not a performance problem. However, if the window sill is damaged, it should be replaced because it is the means by which water will drain out away from the house or,

210

Case Study Walnut Hill United Methodist Church - Dallas, Texas, Chiller Replacement Analysis  

E-Print Network (OSTI)

In March of 1992 Walnut Hill United Methodist Church in Dallas, Tx. decided that their existing thermal storage and electric reciprocating chiller system were both in need of replacement. After analyzing several options, they chose to install 150 tons of gas-fired double-effect absorption chillers. This case study will show the original HVAC operation cost analysis and compare it to the present day operation costs and it will describe how unexpected changes occurred that caused the initial analysis to be questioned. Finally, this case study will show how today's operational costs are lower than originally projected. This presentation is not about the reasons the church chose this particular system, but about the analysis itself and its accuracy.

Phillips, J.

1998-01-01T23:59:59.000Z

211

Steam Generator Replacement and Power Up-rating on Tihange 2 Nuclear Plant Safety Study Analyses  

SciTech Connect

The Tihange2 900 MWe 3-L PWR NPP, operated by the Belgian utility Electrabel, was first commissioned in 1982 with a design core power of 2775 MWth. Following an initial core power up-rating by 4,5% in 1995, Electrabel has since replaced the Steam Generators which has allowed a further core power increase by roughly 5% (total 10%) in 2001. For both of each projects, licensing and implementation studies were successfully performed by Tractebel Energy Engineering and Framatome ANP. The demanding new operating conditions required a complete review of the plant design basis for which advanced methods were applied and licensed through a continuous process of discussions with the client and the Belgian Safety Authorities AVN. The licensing process required flexibility in the methods application in order to meet the specific requirements of the S.A., which was achieved within the time schedule and without jeopardising the technical objectives of the utility. (authors)

Malaval, Andre; Marin-Lafleche, Pascale; Forgeot d'Arc, Myriam; Collin, Celine [Framatome ANP (France)

2002-07-01T23:59:59.000Z

212

Ways Electricity Can Be Used To Replace Fossil Fuels in The French Chemical Industry  

E-Print Network (OSTI)

France energy policy for the year 1990 foresees the following breakdown between various energy sources : renewable sources (including hydraulic) : 11%, coal + natural gas : 30.5%, nuclear : 26.5%, oil : 32%. The electricity will be produced mainly by nuclear: 66 % and by hydraulic : 14%, coal : 15%, fuel oil : 5%. Electricity and coal will then be the two major energy sources at the disposal of the French Industry. The new tariff structure of electricity proposed by Electricite de France will be given briefly explaining why and how electricity used to replace fossil fuels are seriously considered by the French Chemical Industry and by Rhone-Poulenc. Examples of various new utilisations of electrical equipment in chemical processes (thermal, heat pumps, filtration, electrolysis . . .) will be given. Emphasis will be put on research and development for new equipment and on the importance of good information and relationship between utilities suppliers, manufacturers and industrial consumers.

Mongon, A.

1982-01-01T23:59:59.000Z

213

Standard Measurement & Verification Plan for Lighting Equipment Retrofit or Replacement Projects  

Science Conference Proceedings (OSTI)

This document provides a framework for a standard Measurement and Verification (M&V) plan for lighting projects. It was developed to support cost-effective retrofits (partial and complete replacements) of lighting systems and is intended to provide a foundation for an M&V plan for a lighting retrofit utilizing a "best practice" approach, and to provide guidance to site owners, contractors, and other involved organizations on what is essential for a robust M&V plan for lighting projects. This document provides examples of appropriate elements of an M&V plan, including the calculation of expected energy savings. The standard M&V plan, as provided, also allows for consistent comparison with other similar lighting projects. Although intended for lighting retrofit applications, M&V plans developed per this framework document may also be used for other non-lighting technology retrofits and new installations.

Richman, Eric E.

2009-11-04T23:59:59.000Z

214

Microsoft Word - CX-WenatcheeDistrictPoleReplacementFY13_WEB.docx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2, 2013 2, 2013 REPLY TO ATTN OF: KEPR/Pasco SUBJECT: Environmental Clearance Memorandum Joseph Lauer Lineman Foreman III - TFWF-SCHULTZ Proposed Action: Wood pole replacement and minor access road maintenance along various transmission line right-of-ways in Bonneville Power Administration's (BPA) Wenatchee District. The following lines will have pole change-outs in 2013: Grandview-Red Mountain #1 and Columbia-Valhalla #2. PP&A Project No.: 2604 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance activities. Location: Various transmission lines located within the Wenatchee District. See Project Location Attachment for structure locations and corresponding transmission lines.

215

Replaces DOE F 3530.1 5. HOW LONG IN PRESENT POSITION GRADE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

50.2 50.2 (07-95) Replaces DOE F 3530.1 5. HOW LONG IN PRESENT POSITION GRADE 6. DATE NEXT REGULAR STEP INCREASE IS DUE: 7. LIST ANY AWARDS OR QUALITY INCREASES RECEIVED IN LAST 5 YEARS (Date and kind of award) ATTACH A COMPLETED SF-52, "REQUEST FOR PERSONNEL ACTION," AND A COPY OF THE EMPLOYEE'S CURRENT RATING OF RECORD AS DOCUMENTATION THAT PERFORMANCE HAS MET ALL THE REQUIREMENTS FOR AN OUTSTANDING RATING. NAME AND TITLE OF NOMINATING OFFICIAL (Employee's immediate supervisor) 1. NAME OF NOMINEE 3. ORGANIZATION LOCATION OF POSITION 2. POSITION TITLE, GRADE AND STEP 4. RECOMMENDATION COVERS SERVICE FROM (DATE): TO: SIGNATURE DATE NAME AND TITLE OF REVIEWING OFFICIAL (If required by organization)

216

Overcoming restriction as a barrier to DNA transformation in Caldicellulosiruptor species results in efficient marker replacement  

NLE Websites -- All DOE Office Websites (Extended Search)

Overcoming Overcoming restriction as a barrier to DNA transformation in Caldicellulosiruptor species results in efficient marker replacement Daehwan Chung 1,2 , Joel Farkas 1,2 and Janet Westpheling 1,2* Abstract Background: Thermophilic microorganisms have special advantages for the conversion of plant biomass to fuels and chemicals. Members of the genus Caldicellulosiruptor are the most thermophilic cellulolytic bacteria known. They have the ability to grow on a variety of non-pretreated biomass substrates at or near ~80°C and hold promise for converting biomass to bioproducts in a single step. As for all such relatively uncharacterized organisms with desirable traits, the ability to genetically manipulate them is a prerequisite for making them useful. Metabolic engineering of pathways for product synthesis is relatively simple compared to engineering the ability to utilize

217

Replacement of the Idaho National Engineering Laboratory Health Physics Instrumentation Laboratory  

Science Conference Proceedings (OSTI)

The DOE-Idaho Operations Office (DOE-ID) has prepared an environmental assessment (EA) on the replacement of the Idaho National Engineering Laboratory Health Physics Instrumentation Laboratory at the Idaho National Engineering Laboratory (INEL). The purpose of this project is to replace the existing Health Physics Instrumentation Laboratory (HPIL) with a new facility to provide a safe environment for maintaining and calibrating radiation detection instruments used at the Idaho National Engineering Laboratory. The existing HPIL facility provides portable health physics monitoring instrumentation and direct reading dosimetry procurement, maintenance and calibration of radiation detection instruments, and research and development support-services to the INEL and others. However, the existing facility was not originally designed for laboratory activities and does not provide an adequate, safe environment for calibration activities. The EA examined the potential environmental impacts of the proposed action and evaluated reasonable alternatives, including the no action alternative in accordance with the Council on Environmental Quality (CEQ) Regulations (40 CFR Parts 1500-1508). Based on the environmental analysis in the attached EA, the proposed action will not have a significant effect on the human environment within the meaning of the National Environmental Policy Act (NEPA) and 40 CFR Parts 1508.18 and 1508.27. The selected action (the proposed alternative) is composed of the following elements, each described or evaluated in the attached EA on the pages referenced. The proposed action is expected to begin in 1997 and will be completed within three years: design and construction of a new facility at the Central Facility Area of the INEL; operation of the facility, including instrument receipt, inspections and repairs, precision testing and calibration, and storage and issuance. The selected action will result in no significant environmental impacts.

NONE

1995-05-01T23:59:59.000Z

218

DEVELOPMENT OF REMOTE HANFORD CONNECTOR GASKET REPLACEMENT TOOLING FOR THE SAVANNAH RIVER SITE'S DEFENSE WASTE PROCESSING FACILITY  

Science Conference Proceedings (OSTI)

The Savannah River Site's (SRS) Defense Waste Processing Facility (DWPF) requested development of tooling for remote replacement of gaskets in mechanical Hanford connectors. The facility has compressed air supply, two master-slave manipulators (MSM's) and a lightweight robotic arm for operation of the remote tools. The Savannah River National Laboratory (SRNL) developed and tested multiple tools to perform the gasket replacement tasks. Separate pneumatic snap-ring removal tools that use the connector skirt as a reaction surface were developed for removal of the snap ring and spent gasket on both vertical and horizontal Hanford connectors. A pneumatic tool that clamps and centers on the jumper pipe ID was developed to simultaneously install the new gasket and snap ring. A pneumatic snap-ring-loading tool was developed that compresses the snap ring and places it in a groove in the installation tool. All of the tools are located on a custom work table with a pneumatic valve station that directs compressed air to the desired tool and vents the tools as needed. The entire system has been successfully tested using MSM's to manipulate the various tools. Deployment of the entire system is expected during FY08. The Hanford connector gasket replacement tooling has been successfully tested using MSM's to manipulate the various tools. Nitric acid is used in many of the decontamination processes performed in the REDC, where the tooling will be deployed. Although most of the tool components were fabricated/purchased with nitric acid and radioactive service in mind, some of the prototype parts must be replaced with parts that are more compatible with nitric acid/radioactive service. Several modifications to the various tools are needed to facilitate maintenance and replacement of failed components. Development of installation tools for replacement of 1-inch, 2-inch and multi-hole gaskets is being considered. Deployment of the existing system in the DWPF REDC is expected during FY08.

Krementz, D

2007-11-27T23:59:59.000Z

219

DOE/EA-1636: Albany-Burnt Woods and Santiam-Toledo Pole Replacement Project Preliminary Environmental Assessment (March 2009)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Albany-Burnt Woods and Albany-Burnt Woods and Santiam-Toledo Pole Replacement Project Preliminary Environmental Assessment DOE/EA-1636 March 2009 B O N N E V I L L E P O W E R A D M I N I S T R A T I O N Albany-Burnt Woods and Santiam-Toledo Pole Replacement Project Preliminary Environmental Assessment DOE/EA-1636 Bonneville Power Administration March 2009 Bonneville Power Administration i Table of Contents Chapter 1 Need for and Purpose of Action ............................................................... 1-1 1.1 Introduction .....................................................................................................

220

ORIGINAL INVESTIGATION Timing of Acute Myocardial Infarction in Patients Undergoing Total Hip or Knee Replacement A Nationwide Cohort Study  

E-Print Network (OSTI)

Background: Limited evidence suggests that the risk of acute myocardial infarction (AMI) may be increased shortly after total hip replacement (THR) and total knee replacement (TKR) surgery. However, risk of AMI in these patients has not been compared against matched controls who have not undergone surgery. The objective of this study was to evaluate the timing of AMI in patients undergoing THR or TKR surgery compared with matched controls. Methods: Retrospective, nationwide cohort study within the Danish national registries. All patients who underwent a primary THR or TKR (n=95 227) surgery from

Arief Lalmohamed; Pharmd Peter Vestergaard; Dmsc Corinne Klop; Tjeerd P. Van Staa

1998-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Methods for disassembling, replacing and assembling parts of a steam cooling system for a gas turbine  

SciTech Connect

The steam cooling circuit for a gas turbine includes a bore tube assembly supplying steam to circumferentially spaced radial tubes coupled to supply elbows for transitioning the radial steam flow in an axial direction along steam supply tubes adjacent the rim of the rotor. The supply tubes supply steam to circumferentially spaced manifold segments located on the aft side of the 1-2 spacer for supplying steam to the buckets of the first and second stages. Spent return steam from these buckets flows to a plurality of circumferentially spaced return manifold segments disposed on the forward face of the 1-2 spacer. Crossover tubes couple the steam supply from the steam supply manifold segments through the 1-2 spacer to the buckets of the first stage. Crossover tubes through the 1-2 spacer also return steam from the buckets of the second stage to the return manifold segments. Axially extending return tubes convey spent cooling steam from the return manifold segments to radial tubes via return elbows. The bore tube assembly, radial tubes, elbows, manifold segments and crossover tubes are removable from the turbine rotor and replaceable.

Wilson, Ian D. (Mauldin, SC); Wesorick, Ronald R. (Albany, NY)

2002-01-01T23:59:59.000Z

222

Concentrated solar thermal (cst) system for fuelwood replacement and for household water sanitation in developing countries.  

DOE Green Energy (OSTI)

Concentrated Solar Thermal (CST) is a proven renewable energy technology that harnesses solar irradiation in its most primitive form. This technology with roots in ancient history is growing at a fast pace in recent times. Developing countries could use CST to solve fundamental human-needs challenges, such as for the substitution of fuelwood and the treatment of water for household use. This paper proposes a conceptual design for a standardized modular CST for these applications in developing countries. A modular-designed parabolic CST with an aperture area of 7.5 m2 is adequate to provide enough solar thermal energy to replace the fuelwood need (5 tons/yr) or to pasteurize the minimum daily water requirement (2500 liters) for a household. Critical parameters of the CST are discussed and an affordable solid thermal storage is recommended to be used as a backup when sunlight is unavailable. A funding program that includes in-country resources and external funding will be needed to sustain the development and wide spread adaptation of this technology.

Akinjiola, O. P.; Balachandran, U. (Energy Systems); (Rsage Research, LLC)

2012-01-01T23:59:59.000Z

223

Safety Design Strategy for the Advanced Test Reactor Primary Coolant Pump and Motor Replacement Project  

Science Conference Proceedings (OSTI)

In accordance with the requirements of U.S. Department of Energy (DOE) Order 413.3B, Program and Project Management for the Acquisition of Capital Assets, safety must be integrated into the design process for new or major modifications to DOE Hazard Category 1, 2, and 3 nuclear facilities. The intended purpose of this requirement involves the handling of hazardous materials, both radiological and chemical, in a way that provides adequate protection to the public, workers, and the environment. Requirements provided in DOE Order 413.3B and DOE Order 420.1B, Facility Safety, and the expectations of DOE-STD-1189-2008, Integration of Safety into the Design Process, provide for identification of hazards early in the project and use of an integrated team approach to design safety into the facility. This safety design strategy provides the basic safety-in-design principles and concepts that will be used for the Advanced Test Reactor Reliability Sustainment Project. While this project does not introduce new hazards to the ATR, it has the potential for significant impacts to safety-related systems, structures, and components that are credited in the ATR safety basis and are being replaced. Thus the project has been determined to meet the definition of a major modification and is being managed accordingly.

Noel Duckwitz

2011-06-01T23:59:59.000Z

224

Safety Design Strategy for the Advanced Test Reactor Emergency Firewater Injection System Replacement Project  

Science Conference Proceedings (OSTI)

In accordance with the requirements of U.S. Department of Energy (DOE) Order 413.3B, Program and Project Management for the Acquisition of Capital Assets, safety must be integrated into the design process for new or major modifications to DOE Hazard Category 1, 2, and 3 nuclear facilities. The intended purpose of this requirement involves the handling of hazardous materials, both radiological and chemical, in a way that provides adequate protection to the public, workers, and the environment. Requirements provided in DOE Order 413.3B and DOE Order 420.1B, Facility Safety, and the expectations of DOE-STD-1189-2008, Integration of Safety into the Design Process, provide for identification of hazards early in the project and use of an integrated team approach to design safety into the facility. This safety design strategy provides the basic safety-in-design principles and concepts that will be used for the Advanced Test Reactor Reliability Sustainment Project. While this project does not introduce new hazards to the ATR, it has the potential for significant impacts to safety-related systems, structures, and components that are credited in the ATR safety basis and are being replaced. Thus the project has been determined to meet the definition of a major modification and is being managed accordingly.

Noel Duckwitz

2011-06-01T23:59:59.000Z

225

Safety Design Strategy for the Advanced Test Reactor Diesel Bus (E-3) and Switchgear Replacement Project  

Science Conference Proceedings (OSTI)

In accordance with the requirements of U.S. Department of Energy (DOE) Order 413.3B, Program and Project Management for the Acquisition of Capital Assets, safety must be integrated into the design process for new or major modifications to DOE Hazard Category 1, 2, and 3 nuclear facilities. The intended purpose of this requirement involves the handling of hazardous materials, both radiological and chemical, in a way that provides adequate protection to the public, workers, and the environment. Requirements provided in DOE Order 413.3B and DOE Order 420.1B, Facility Safety, and the expectations of DOE-STD-1189-2008, Integration of Safety into the Design Process, provide for identification of hazards early in the project and use of an integrated team approach to design safety into the facility. This safety design strategy provides the basic safety-in-design principles and concepts that will be used for the Advanced Test Reactor Reliability Sustainment Project. While this project does not introduce new hazards to the ATR, it has the potential for significant impacts to safety-related systems, structures, and components that are credited in the ATR safety basis and are being replaced. Thus the project has been determined to meet the definition of a major modification and is being managed accordingly.

Noel Duckwitz

2011-06-01T23:59:59.000Z

226

Use of Brazilian sugarcane bagasse ash in concrete as sand replacement  

SciTech Connect

Sugarcane today plays a major role in the worldwide economy, and Brazil is the leading producer of sugar and alcohol, which are important international commodities. The production process generates bagasse as a waste, which is used as fuel to stoke boilers that produce steam for electricity cogeneration. The final product of this burning is residual sugarcane bagasse ash (SBA), which is normally used as fertilizer in sugarcane plantations. Ash stands out among agroindustrial wastes because it results from energy generating processes. Many types of ash do not have hydraulic or pozzolanic reactivity, but can be used in civil construction as inert materials. The present study used ash collected from four sugar mills in the region of Sao Carlos, SP, Brazil, which is one of the world's largest producers of sugarcane. The ash samples were subjected to chemical characterization, sieve analysis, determination of specific gravity, X-ray diffraction, scanning electron microscopy, and solubilization and leaching tests. Mortars and concretes with SBA as sand replacement were produced and tests were carried out: compressive strength, tensile strength and elastic modulus. The results indicated that the SBA samples presented physical properties similar to those of natural sand. Several heavy metals were found in the SBA samples, indicating the need to restrict its use as a fertilizer. The mortars produced with SBA in place of sand showed better mechanical results than the reference samples. SBA can be used as a partial substitute of sand in concretes made with cement slag-modified Portland cement.

Sales, Almir, E-mail: almir@ufscar.b [Department of Civil Engineering, UFSCar, Via Washington Luis, km 235, Monjolinho, 13565-905 Sao Carlos, SP (Brazil); Lima, Sofia Araujo, E-mail: sofiaalima@yahoo.com.b [Department of Civil Engineering, UFSCar, Via Washington Luis, km 235, Monjolinho, 13565-905 Sao Carlos, SP (Brazil)

2010-06-15T23:59:59.000Z

227

Replacement of Lighting Fixtures with LED Energy Efficient Lights at the Parking Facility, Milwaukee, Wisconsin  

Science Conference Proceedings (OSTI)

The Forest County Potawatomi Community (FCPC or Tribe) owns a six-story parking facility adjacent to its Potawatomi Bingo Casino (the Casino) in Milwaukee, Wisconsin, as well as a valet parking facility under the Casino (collectively, the Parking Facility). The Parking Facility contained 205-watt metal halide-type lights that, for security reasons, operated 24 hours per day, 7 days per week. Starting on August 30, 2010, the Tribe replaced these fixtures with 1,760 state-of-the-art, energy efficient 55-Watt LED lights. This project resulted in an immediate average reduction in monthly peak demand of 238 kW over the fourth quarter of 2010. The average reduction in monthly peak demand from October 1 through December 31, 2010 translates into a forecast annual electrical energy reduction of approximately 1,995,000 kWh or 47.3% of the pre-project demand. This project was technically effective, economically feasible, and beneficial to the public not only in terms of long term energy efficiency and associated emissions reductions, but also in the short-term jobs provided for the S.E. Wisconsin region. The project was implemented, from approval by U.S. Department of Energy (DOE) to completion, in less than 6 months. The project utilized off-the-shelf proven technologies that were fabricated locally and installed by local trade contractors.

David Brien

2012-06-21T23:59:59.000Z

228

Inspector General audit report on Transportation Safeguards Division courier work schedules and escort vehicle replacements  

Science Conference Proceedings (OSTI)

The Office of Inspector General`s (OIG) April 1995 report found that couriers received too much overtime and incurred too much unproductive time. This finding occurred because the Transportation Safeguards Division (TSD) employed a traditional work schedule that did not meet the demands of the job. The report recommended implementing an alternative work schedule that corresponded more closely to the couriers` actual work requirements. Management agreed to conduct a comparative analysis of work schedules to evaluate potential savings. The objectives of this audit were to (1) follow up on actions taken as a result of the OIG`s previous report, (2) determine if courier work schedules are cost effective, and (3) determine the cost effectiveness of escort vehicle replacements. The authors recommend: (1) implementing an alternative work schedule for courier which would achieve savings in overtime and unproductive time, while efficiently and cost effectively fulfilling TSD`s mission; (2) reexamining and adjusting the staffing level of each courier section in relation to the workload requirements in the area; and (3) discontinuing payment for travel time between courier lodging and temporary duty stations. The Albuquerque Operations Office agreed with the auditor`s findings and recommendations.

NONE

1998-12-01T23:59:59.000Z

229

The significance of employing depth-related community replacement models in Carboniferous-Permian sequence stratigraphy  

SciTech Connect

Paleoecological analysis is essential for accurate Carboniferous-Permian sequence-stratigraphic modeling. Employing depth-related community replacement paleoecological models (such as proposed by Boardman and others, 1984) is crucial for delineation of transgressive, highstand, and regressive deposits; locating and calibrating highstands and determination of degree of accommodation space utilization within the cycle succession. Early transgressive deposits are often exceedingly thin or absent in middle to inner shelf regions, and are commonly associated with mixed biofacies representing rapid sea-level rise accompanied by excessively slow net sedimentation rate. Because of the highly discontinuous and poorly developed nature of transgressive deposits, maximum highstand deposits as determined by the onshore-offshore paleoecological model, are shown to commonly be in direct contact with non-marine or marginal marine deposits, the result of facies dislocation. The amount of accommodation space utilized during a particular transgressive and regressive sedimentary sequence is directly related to the rates of sea-level rise, duration of stillstand, as well as the rates of sea-level fall. The author's work suggests that the rates of sea-level rises and falls have varied significantly during the Upper Pennsylvanian and Lower Permian. Sea-Level fluctuation curves have thusfar aided in interbasinal correlations of upper Desmoinesian-lower Virgilian strata from the Midcontinent to the Eastern Shelf of the Midland Basin, Pedregosa Basin of Arizona, the Illinois Basin, and the Appalachian Basin.

Boardman, D.R. (Oklahoma State Univ., Stillwater, OK (United States). School of Geology); Mapes, R.H. (Ohio Univ., Athens, OH (United States). Dept. of Geological Sciences)

1993-02-01T23:59:59.000Z

230

Simulation Analyses in Support of DOEs Fossil Fuel Rule for Single Component Equipment and Lighting Replacements  

SciTech Connect

At the request of DOEs Federal Energy Management Program (FEMP), Pacific Northwest National Laboratory (PNNL) conducted a series of building energy simulations using a large office model to investigate the potential savings that could be accrued from a typical chiller, boiler, or lighting replacement in a Federal office building.

Halverson, Mark A.; Wang, Weimin

2013-10-16T23:59:59.000Z

231

Data Protection The Data Protection Act 1984 has now been replaced by the Data Protection Act 1998,  

E-Print Network (OSTI)

Data Protection The Data Protection Act 1984 has now been replaced by the Data Protection Act 1998, which is based on the European Data Protection Directive. The 1998 Act applies to both manual for privacy and access by individuals. Information on how to make a request for access to personal data under

Priestley, Hilary

232

Transparent and Conductive Carbon Nanotube Multilayer Thin Films Suitable as an Indium Tin Oxide Replacement  

E-Print Network (OSTI)

Transparent electrodes made from metal oxides suffer from poor flexibility and durability. Highly transparent and electrically conductive thin films based on carbon nanotubes (CNTs) were assembled as a potential indium tin oxide (ITO) replacement using layer-by-layer (LbL) assembly. The ultimate objective of this dissertation work is to produce CNT-based assemblies with sheet resistance below 100 Omega/sq and visible light transmission greater than 85 percent. The alternate deposition of positively charged poly(diallyldimethylammonium chloride) [PDDA] and CNTs stabilized with negatively charged deoxycholate (DOC) exhibit linear film growth and thin film properties can be precisely tuned. Ellipsometry, quartz crystal microbalance, and UV-vis were used to measure the growth of these films as a function of PDDA-CNT bilayers deposited, while TEM, SEM, and AFM were used to visualize the nanostructure of these films. Following a literature review describing potential ITO substitutes and LbL technology, the influence of CNT type on optoelectronic performance of LbL assemblies is described. Three different types of nanotubes were investigated: (1) multiwalled carbon nanotubes (MWNTs), (2) few-walled carbon nanotubes (FWNT), and (3) purified single-walled carbon nanotubes (SWNTs). SWNTs produced the most transparent (>85 percent visible light transmittance) and electrically conductive (148 S/cm, 1.62 kOmega/sq) 20-bilayer films with a 41.6 nm thickness, while MWNT-based films are much thicker and more opaque. A 20-bilayer PDDA/(MWNT DOC) film is approximately 103 nm thick, with a conductivity of 36 S/cm and a transmittance of 30 percent. In an effort to improve both transparency and electrical conductivity, heat and acid treatments were studied. Heating films to 300 degree C reduced sheet resistance to 701 Omega/sq (618 S/cm conductivity, 38.4 nm thickness), with no change in transparency, owing to the removal of insulating component in the film. Despite improving conductivity, heating is not compatible with most plastic substrates, so acid doping was investigated as an alternate means to enhance properties. Exposing SWNT-based assemblies to HNO3 vapor reduced sheet resistance of a 10 BL film to 227 Omega/sq. Replacing SWNTs with double walled carbon nanotubes (DWNTs) provided further reduction in sheet resistance due to the greater metallic of DWNT. A 5 BL DWNT film exhibited the lowest 104 Omega/sq sheet resistance (4200 S/cm conductivity, 22.9 nm thickness) with 84 percent transmittance after nitric acid treatment. DWNT-based assemblies maintained their low sheet resistance after repeated bending and also showed electrochemical stability relative to ITO. This work demonstrates the excellent optoelectronic performance, mechanical flexibility, and electrochemical stability of CNT-based assemblies, which are potentially useful as flexible transparent electrodes for a variety of flexible electronics.

Park, Yong Tae

2011-05-01T23:59:59.000Z

233

Energy efficiency, newly recognized overseas, can replace most dangerous nuclear plants  

Science Conference Proceedings (OSTI)

The cheapest way to achieve global energy/environmental goals is to encourage investment in efficiency overseas. Energy intensity is defined as E/GNP, where E = primary Energy and GNP = Gross National Product. E/GNP is 2-3 times higher in the 2nd (formerly communist) and 3rd (developing) worlds than in the {open_quotes}1st{close_quotes} (industrialized) world. In the 1st world E/GNP is dropping 1-2% year, but, except for China, it is still rising in worlds 2 and 3. For developing countries, E/GNP first rises with a need for heavy industry, then falls as efficiency improves and industry {open_quotes}lightens.{close_quotes} But there are 7 serious barriers against efficient use of energy. (1) Price. The price of energy is invariably subsidized. (2) Poor information, e.g., no fuel economy labels on cars, equipment, appliances. (3) Lack of choice. Little opportunity for comparison shopping. (4) Poor management. Industry still produces the wrong thing. (5) Ideological utility policy. Particularly in communist countries, energy and electrification were seen as manifest goods (the way we view wealth). (6) Ideological Western Institutions, particularly the World Bank and the regional development banks, who typically devoted rates for future savings-the poorer the consumer, the higher the discount rate. This skews the social investments in favor of more energy supply. Given the remarkable success of efficiency in the West, and the acceptance of {open_quotes}integrated utility planning{close_quotes} where utilities can diversify into more profitable investments on the customer side of the meter, all the barriers above are crumbling rapidly. It should be easy to replace all the dangerous nuclear plants in the former Soviet Union with just more efficient lamps and motors. Progress will be discussed quantitatively.

Rosenfeld, A.H.

1993-04-01T23:59:59.000Z

234

Stress Testing of the Philips 60W Replacement Lamp L Prize Entry  

SciTech Connect

The Pacific Northwest National Laboratory, operated by Battelle for the U.S. Department of Energy, worked with Intertek to develop a procedure for stress testing medium screw-base light sources. This procedure, composed of alternating stress cycles and performance evaluation, was used to qualitatively compare and contrast the durability and reliability of the Philips 60W replacement lamp L Prize entry with market-proven compact fluorescent lamps (CFLs) with comparable light output and functionality. The stress cycles applied simultaneous combinations of electrical, thermal, vibration, and humidity stresses of increasing magnitude. Performance evaluations measured relative illuminance, x chromaticity and y chromaticity shifts after each stress cycle. The Philips L Prize entry lamps appear to be appreciably more durable than the incumbent energy-efficient technology, as represented by the evaluated CFLs, and with respect to the applied stresses. Through the course of testing, all 15 CFL samples permanently ceased to function as a result of the applied stresses, while only 1 Philips L Prize entry lamp exhibited a failure, the nature of which was minor, non-destructive, and a consequence of a known (and resolved) subcontractor issue. Given that current CFL technology appears to be moderately mature and no Philips L Prize entry failures could be produced within the stress envelope causing 100 percent failure of the benchmark CFLs, it seems that, in this particular implementation, light-emitting diode (LED) technology would be much more durable in the field than current CFL technology. However, the Philips L Prize entry lamps used for testing were carefully designed and built for the competition, while the benchmark CFLs were mass produced for retail salea distinction that should be taken into consideration. Further reliability testing on final production samples would be necessary to judge the extent to which the results of this analysis apply to production versions of the Philips L Prize entry.

Poplawski, Michael E.; Ledbetter, Marc R.; Smith, Mark

2012-04-24T23:59:59.000Z

235

Replacement of Fishmeal with Plant Feedstuffs in the Diet of Red Drum Sciaenops ocellatus: An Assessment of Nutritional Value  

E-Print Network (OSTI)

The expansion of aquaculture has increased demand for fishmeal supplies around the world; this, in turn, has resulted in dramatic increases in the cost of fishmeal, which has sparked interest in alternative feedstuffs. The development of new processing technologies, as well as the expanding generation of by-products from ethanol production has resulted in the development of novel protein sources that have the potential for replacing fishmeal in aquafeeds. The present study assessed the nutritional value of soy protein concentrate (SoyPC), barley protein concentrate (BarPC) and corn protein concentrate (CornPC) in the diet of red drum. Three sequential feeding trials were conducted; in these 50%, 75%, or 90% of the protein provided by Special SelectTM menhaden fishmeal in the reference diet was replaced with either SoyPC, BarPC, or CornPC in isonitrogenous (40% CP), isoenergetic (3.1kcal g-1) diets. Red drum with an average weight of 2.5 g, 1.6 g, and 1.5 g for trials 1, 2, and 3, respectively, were stocked in a recirculating system and fed twice daily at a rate approaching apparent satiation for 6 to 8 weeks. Along with the substitution of the selected plant feedstuffs, supplementation of DL-methionine and L-lysine was provided to exceed the established requirements of red drum for lysine and methionine, and glycine was added for palatability. Performance parameters of weight gain, feed efficiency, survival, hepatosomatic index, intraperitoneal fat ratio, and apparent digestibility coefficients for protein along with proximate composition of whole-body tissues were determined in the various trials. Results showed that 50% replacement of fishmeal protein by each of the protein concentrates produced fish performance, condition indices, and whole-body composition similar to those produced by the reference diet. However, replacing 75% and 90% of fishmeal protein with each of the plant protein concentrates reduced fish performance but not as severely as replacing all of the fishmeal protein with equal (33%) contributions from SoyPC, BarPC, and CornPC. Contrarily, these dietary substitutions did not reduce the apparent protein digestibility of the experimental diets. Based on the various results of this study, SoyPC, BarPC, and CornPC can readily replace 50% of the protein provided by menhaden fishmeal without adversely affecting the performance of cultured red drum.

Moxley, Joseph

2012-05-01T23:59:59.000Z

236

Project Plan 7930 Cell G PaR Remote Handling System Replacement  

Science Conference Proceedings (OSTI)

For over 40 years the US Department of Energy (DOE) and its predecessors have made Californium-252 ({sup 252}Cf) available for a wide range of industries including medical, nuclear fuels, mining, military and national security. The Radiochemical Engineering Development Center (REDC) located within the Oak Ridge National Laboratory (ORNL) processes irradiated production targets from the High Flux Isotope Reactor (HFIR). Operations in Building 7930, Cell G provide over 70% of the world's demand for {sup 252}Cf. Building 7930 was constructed and equipped in the mid-1960s. Current operations for {sup 252}Cf processing in Building 7930, Cell G require use of through-the-wall manipulators and the PaR Remote Handling System. Maintenance and repairs for the manipulators is readily accomplished by removal of the manipulator and relocation to a repair shop where hands-on work can be performed in glove boxes. Contamination inside cell G does not currently allow manned entry and no provisions were created for a maintenance area inside the cell. There has been no maintenance of the PaR system or upgrades, leaving operations vulnerable should the system have a catastrophic failure. The Cell G PaR system is currently being operated in a run to failure mode. As the manipulator is now 40+ years old there is significant risk in this method of operation. In 2006 an assessment was completed that resulted in recommendations for replacing the manipulator operator control and power centers which are used to control and power the PaR manipulator in Cell G. In mid-2008 the chain for the bridge drive failed and subsequent examinations indicated several damaged links (see Figure 1). To continue operations the PaR manipulator arm is being used to push and pull the bridge as a workaround. A retrieval tool was fabricated, tested and staged inside Cell G that will allow positioning of the bridge and manipulator arm for removal from the cell should the PaR system completely fail. A fully functioning and reliable Par manipulator arm is necessary for uninterrupted {sup 252}Cf operations; a fully-functioning bridge is needed for the system to function as intended.

Kinney, Kathryn A [ORNL

2009-10-01T23:59:59.000Z

237

The effect of dietary fish oil and poultry fat replacement with canola oil on swimming performance and metabolic response to hypoxia in stream type spring  

E-Print Network (OSTI)

The effect of dietary fish oil and poultry fat replacement with canola oil on swimming performance to 40 weeks on diets where varying levels of refined canola oil (CO) replaced anchovy oil and poultry profiles. Commercially available plant oils such as canola oil (CO) typically possess large amounts

Vellend, Mark

238

Considerations for Conversion or Replacement of Medium-Voltage Air-Magnetic Circuit Breakers Using Vacuum or SF6 Technolo gy: Revision to TR-106761  

Science Conference Proceedings (OSTI)

Obsolescence and aging of medium-voltage circuit breakers in nuclear power plants are realities. Plants that are pursuing plant life extension must decide whether to continue to maintain their existing obsolete circuit breakers or to convert or replace them with newer technology. This document provides relevant and useful information regarding conversions and replacement circuit breakers.

2003-11-20T23:59:59.000Z

239

Microsoft Word - CX-Pearl-Marion-Tower-6-2-Replace_FY12_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3, 2012 3, 2012 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Richard Heredia Project Manager - TEP-TPP-1 Proposed Action: Pearl-Marion No.1 Tower 6/2 replacement project PP&A Project No.: PP&A 2147, WO# 00296634, Task 3 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B4.6 Additions and modifications to transmission facilities Location: Canby, Clackamas County, Oregon Township 3 South, Range 1 East, Section 19 Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA proposes to replace a single tower (6/2) on the existing Pearl-Marion No. 1 500-kilovolt (kV) transmission line. Tower 6/2 is located along the Molalla River where natural river channel movement and continued stream bank erosion

240

Microsoft Word - CX-NorthBonneville75-4ReplacementWenatcheeFY12_WEB.docx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

KEPR/Pasco KEPR/Pasco SUBJECT: Environmental Clearance Memorandum Richard Heredia Project Manager - TEP-TPP-1 Proposed Action: North Bonneville-Midway No. 1 Tower 75/4 Replacement PP&A Project No.: 2410 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance Location: The work associated with this project will take place in the areas shown in the table below: Transmission Line/ROW Structure # Township Range Section County, State North Bonneville- Midway #1 75/4 6N 17E 14, 23 Klickitat, WA Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA proposes to replace tower 75/4 on the North Bonneville-Midway No. 1 230-kilovolt (kV) transmission line to ensure the continued safe and

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Design and development of a 3He replacement safeguards neutron counter based on 10B-lined proportional detector technology  

SciTech Connect

This presentation represents an overview of the experimental evaluation of a boron-lined proportional technology performed within an NA-241 sponsored project on testing of boron-lined proportional counters for the purpose of replacement of {sup 3}He technologies. The presented boron-lined technology will be utilized in a design of a full scale safeguards neutron coincidence counter. The design considerations and the Monte Carlo performance predictions for the counter are also presented.

Henzlova, Daniela [Los Alamos National Laboratory; Evans, Louise [Los Alamos National Laboratory; Menlove, Howard O. [Los Alamos National Laboratory; Swinhoe, Martyn T. [Los Alamos National Laboratory; Rael, Carlos D. [Los Alamos National Laboratory; Martinez, Isaac P. [Los Alamos National Laboratory; Marlow, Johnna B. [Los Alamos National Laboratory

2012-07-16T23:59:59.000Z

242

Influence of variable topsoil replacement depths on soil chemical parameters within a coal mine in northeastern Wyoming, USA  

SciTech Connect

Uniform topsoil replacement depths on coal mine reclaimed areas have been mandated by USA federal and state regulations; however, soils of the premine landscape are not naturally uniform in depth and vary in physical, chemical, and biological characteristics. In addition, uniform topsoil depths may actually hinder the development of diverse reclaimed plant communities. We studied the effect of varying topsoil replacement depth treatments (15, 30, and 56 cm) on soil and backfill pH, electrolytic conductivity (EC), and sodium adsorption ratio (SAR) within a reclaimed coal mine study area. Backfill material (also known as spoil) at this site did not possess levels of pH, EC, and SAR that were detrimental to plant growth. There was only a slight reduction in pH, EC, and SAR within the upper 15 cm depth in the reclaimed topsoil treatments with a general increase of EC and SAR in the lower portion of the replaced soil profile. Some downward movement of soluble salts within the reclaimed treatments was evident despite low precipitation. For examples, SAR in the 0-15 cm depth over all reclaimed treatments was lower in 2002 than 2000-2001, and the 0-30 cm portion of the reclaimed soil profile had reduced pH and EC, while the 30-60 cm portion had increased EC and SAR. It is anticipated that soil quality differences in terms of pH, EC, and SAR between topsoil depth treatments will be enhanced with time. Comparison of the reclaimed area to the native reference areas suggested numerous depth differences as a result of homogeneity of the replaced topsoil vs. undisturbed soil profiles.

Schladweiler, B.K.; Vance, G.F.; Legg, D.E.; Munn, L.C.; Haroian, R. [University of Wyoming, Laramie, WY (US). Dept. of Renewable Resources

2004-10-15T23:59:59.000Z

243

Advanced Pipe Replacement Procedure for a Defective CRDM Housing Nozzle Enables Continued Normal Operation of a Nuclear Power Plant  

SciTech Connect

During the 2003 outage at the Ringhals Nuclear Plant in Sweden, a leak was found in the vicinity of a Control Rod Drive Mechanism (CRDM) housing nozzle at Unit 1. Based on the ALARA principle for radioactive contamination, a unique repair process was developed. The repair system includes utilization of custom, remotely controlled GTAW-robots, a CNC cutting and finishing machine, snake-arm robots and NDE equipment. The success of the repair solution was based on performing the machining and welding operations from the inside of the SCRAM pipe through the CRDM housing since accessibility from the outside was extremely limited. Before the actual pipe replacement procedure was performed, comprehensive training programs were conducted. Training was followed by certification of equipment, staff and procedures during qualification tests in a full scale mock-up of the housing nozzle. Due to the ingenuity of the overall repair solution and training programs, the actual pipe replacement procedure was completed in less than half the anticipated time. As a result of the successful pipe replacement, the nuclear power plant was returned to normal operation. (authors)

Gilmore, Geoff; Becker, Andrew [Climax Portable Machine Tools, Inc., 2712 East Second Street, Newberg, OR 97132 (United States)

2006-07-01T23:59:59.000Z

244

Audit of the Replacement High Level Waste Evaporator at Savannah River, ER-B-95-04  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OFFICE OF INSPECTOR GENERAL REPORT ON THE AUDIT OF THE REPLACEMENT HIGH LEVEL WASTE EVAPORATOR AT THE SAVANNAH RIVER SITE The Office of Audit Services wants to make the distribution of its audit reports as customer friendly and cost effective as possible. Therefore, this report will be available electroni- cally through the Internet five to seven days after publication at the following alternative addresses: Department of Energy Headquarters Gopher gopher.hr.doc.gov Department of Energy Headquarters Anonymous FTP vm1.hqadmin.doe.gov U.S. Department of Energy Human Resources and Administration

245

Optimizing the replacement of overhead lines in rural distribution systems with respect to reliability and customer value  

E-Print Network (OSTI)

In this paper we present a method for establishing the value of a networks components from a reliability worth perspective. The method can be applied to a general distribution system i.e. both for radial and meshed network systems. Moreover, this paper shows results from an application study for a rural network system that is dominated by overhead lines. The purpose of the study was to establish the value of a secondary feeding point. Further, the method is used to establish the best replacement strategy for the concerned overhead lines.

Patrik Hilber; Bengt Hllgren; Lina Bertling

2005-01-01T23:59:59.000Z

246

Crude Glycerol as Cost-Effective Fuel for Combined Heat and Power to Replace Fossil Fuels, Final Technical Report  

SciTech Connect

The primary objectives of this work can be summed into two major categories. Firstly, the fundamentals of the combustion of glycerol (in both a refined and unrefined form) were to be investigated, with emphasis of the development of a system capable of reliably and repeatedly combusting glycerol as well as an analysis of the emissions produced during glycerol combustion. Focus was placed on quantifying common emissions in comparison to more traditional fuels and this work showed that the burner developed was able to completely combust glycerol within a relatively wide range of operating conditions. Additionally, focus was placed on examining specific emissions in more detail, namely interesting NOx emissions observed in initial trials, acrolein and other volatile organic emissions, and particulate and ash emissions. This work showed that the combustion of crude glycerol could result in significantly reduced NOx emissions as a function of the high fuel bound oxygen content within the glycerol fuel. It also showed that when burned properly, the combustion of crude glycerol did not result in excessive emissions of acrolein or any other VOC compared to the combustion from more traditional fuels. Lastly however, this work has shown that in any practical application in which glycerol is being burned, it will be necessary to explore ash mitigation techniques due to the very high particulate matter concentrations produced during glycerol combustion. These emissions are comparable to unfiltered coal combustion and are directly tied to the biodiesel production method. The second focus of this work was directed to developing a commercialization strategy for the use of glycerol as a fuel replacement. This strategy has identified a 30 month plan for the scaling up of the laboratory scale burner into a pre-pilot scale system. Additionally, financing options were explored and an assessment was made of the economics of replacing a traditional fuel (namely natural gas) with crude glycerol from biodiesel production. This analysis showed that the cost of replacing natural gas with crude glycerol requires a strong function of the market price per unit of energy for the traditional fuel. However, the economics can be improved through the inclusion of a federal tax credit for the use of a renewable fuel. The conclusion of this analysis also shows that the ideal customer for energy replacement via crude glycerol is biodiesel producers who are located in remote regions, where the cost of energy is higher and the cost of crude glycerol is lowest. Lastly, the commercialization strategy analyzed competing technologies, namely traditional natural gas and electric heaters, as well as competing glycerol burners, and concludes with a discussion of the requirements for a pilot demonstration.

William L. ROberts

2012-10-31T23:59:59.000Z

247

DOE/EA-1636: Finding of No Significant Impact for the Albany-Burnt Woods and Santiam-Toledo Pole Replacement Project EA (March 2009)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Albany-Burnt Woods and Santiam-Toledo Pole Replacement Project Albany-Burnt Woods and Santiam-Toledo Pole Replacement Project Finding of No Significant Impact (FONSI) and Floodplain Statement of Findings DOE/EA-1636 Summary The Bonneville Power Administration (BPA) announces its environmental findings on the Albany- Burnt Woods and Santiam-Toledo Pole Replacement Project. This project involves replacing wood pole structures on the existing Albany-Burnt Woods single-circuit, 115-kilovolt (kV) transmission line and along a portion of the existing Santiam-Toledo single circuit, 230-kV transmission line. BPA has prepared an environmental assessment (DOE/EA-1636) evaluating the proposed project and its alternative. Based on the analysis in the EA, BPA has determined that the Proposed Action is not a major federal action significantly affecting the quality of the human environment, within the

248

> REPLACE THIS LINE WITH YOUR PAPER IDENTIFICATION NUMBER (DOUBLE-CLICK HERE TO EDIT) < 1 Abstract--The tight coupling between system and market  

E-Print Network (OSTI)

61801 USA (tguler@illinois.edu, gross@illinois.edu). E. Litvinov and R. Coutu are with the ISO New Gross, Fellow, IEEE, Eugene Litvinov, Senior Member, IEEE, and Ron Coutu #12;> REPLACE THIS LINE

Gross, George

249

Secondary Eyewall Formation and Eyewall Replacement Cycles in a Simulated Hurricane: Effect of the Net Radial Force in the Hurricane Boundary Layer  

Science Conference Proceedings (OSTI)

Multiple secondary eyewall formations (SEFs) and eyewall replacement cycles (ERCs) are simulated with the fifth-generation Pennsylvania State University (PSU)National Center for Atmospheric Research (NCAR) Mesoscale Model (MM5) at horizontal grid ...

Xingbao Wang; Yimin Ma; Noel E. Davidson

2013-05-01T23:59:59.000Z

250

Finding of No Significant Impact and Final Environmental Assessment for the Y-12 Steam Plant Life Extenstion Project - Steam Plant Replacement Subproject  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

93 93 Finding of No Significant Impact and Final Environmental Assessment for the Y-12 Steam Plant Life Extension Project - Steam Plant Replacement Subproject U.S. Department of Energy Oak Ridge Y-12 Site Office National Nuclear Security Administration August 2007 DOE/EA-1593 Finding of No Significant Impact and Final Environmental Assessment for the Y-12 Steam Plant Life Extension Project - Steam Plant Replacement Subproject U.S. Department of Energy National Nuclear Security Administration

251

Replacement energy costs for nuclear electricity-generating units in the United States: 1997--2001. Volume 4  

Science Conference Proceedings (OSTI)

This report updates previous estimates of replacement energy costs for potential short-term shutdowns of 109 US nuclear electricity-generating units. This information was developed to assist the US Nuclear Regulatory Commission (NRC) in its regulatory impact analyses, specifically those that examine the impacts of proposed regulations requiring retrofitting of or safety modifications to nuclear reactors. Such actions might necessitate shutdowns of nuclear power plants while these changes are being implemented. The change in energy cost represents one factor that the NRC must consider when deciding to require a particular modification. Cost estimates were derived from probabilistic production cost simulations of pooled utility system operations. Factors affecting replacement energy costs, such as random unit failures, maintenance and refueling requirements, and load variations, are treated in the analysis. This report describes an abbreviated analytical approach as it was adopted to update the cost estimates published in NUREG/CR-4012, Vol. 3. The updates were made to extend the time frame of cost estimates and to account for recent changes in utility system conditions, such as change in fuel prices, construction and retirement schedules, and system demand projects.

VanKuiken, J.C.; Guziel, K.A.; Tompkins, M.M.; Buehring, W.A. [Argonne National Lab., IL (United States)

1997-09-01T23:59:59.000Z

252

ASIC (Application Specific Integrated Circuit) replacement for an SSI (Small Scale Integrated) component design a case study  

SciTech Connect

This case study covers the practical issues of design-for- functionality, design-for-simulation, and design-for-testability in replacing aging SSI component designs with ASIC gate arrays. The replacement of a 169-TTL-component design with a CMOS ASIC gate array is presented. Maintaining existing functionality is accomplished through a series of ordered conversion steps that minimize the probability of error in the conversion. Design modifications, such as the addition of initialization circuitry, were necessary to take advantage of CAE simulation tools. The faster ASIC technology coupled with design modifications allowed the time-to-simulate to be decreased by a factor of 10,000. A unique pseudo-random number generation/signature analysis technique is presented that interrogates highly sequential designs. The testability scheme and other design techniques improved stuck-at fault coverage by more than 640%. The economic advantages, knowledge gained, and the tools developed that are applicable to future design work are also discussed. 12 figs.

Everts, J.; Gelet, D.; Deatherage, D.; Contreras, M.

1989-01-01T23:59:59.000Z

253

Influence of Diet on Performance Parameters, Intestinal Lesion Development, and Oocyst Cycling in Live Oocyst Vaccinated Replacement Broiler Breeders  

E-Print Network (OSTI)

Two consecutive experiments were conducted to evaluate the influence of dietary composition, specifically protein and amino acid profile, on performance parameters, oocyst output, and lesion development in male and female replacement broiler breeders of two different genetic lines vaccinated with a live coccidiosis vaccine. Dietary formulations were based on either breeder specific recommendations or formulations of a broiler integrator. On day 28, males of each genetic line were added to female pens to evaluate the effect of co-mingling on male performance. Lesion assessment was performed on three separate occasions per each experiment. Fecal material was collected to determine oocyst cycling patterns. During experiment 1, flock uniformity was improved (P less than/equal to 0.05) in Line A males fed the integrator diet. Increased body weight and improved uniformity of Line B females was observed with the breeder recommended diet. Co-mingling negatively impacted (P less than/equal to 0.05) male body weight. Multiple oocyst peaks were observed in both genetic lines, with the first peak occurring at approximately 16 to 18 days post placement. This first peak tended to have the highest observed magnitude and corresponded with the highest level of intestinal lesions observed during the experiment. In experiment 2, diet impacted (P less than/equal to 0.05) average body weight in Line A males, Line B males, and Line B females. Line A males fed the breeder recommended diet had increased (P less than/equal to 0.05) body weight at the termination of the experiment. Line B males and females fed the breeder recommended diet had increased (P less than/equal to 0.05) body weights throughout the experiment beginning on day 7. Negative effects (P less than/equal to 0.05) on male body weight resulting from co-mingling were observed. Oocyst peaks were delayed and at a lower magnitude in both genetic lines compared to peaks observed in experiment 1. Dietary interactions were observed in both experiments where magnitude of peak, duration of oocyst output, and severity of lesion development was influenced by diet in both male and female genetic lines. These data indicate that co-mingling negatively impacts male performance and dietary composition can impact male and female performance, oocyst cycling, and lesion development during coccidiosis vaccination in replacement broiler breeders and should be taken into consideration when rearing replacement broiler breeders.

Oden, Leslee Ann

2009-08-01T23:59:59.000Z

254

Experimental Performance of R-1234yf and R-1234ze as Drop-in Replacements for R-134a in Domestic Refrigerators  

Science Conference Proceedings (OSTI)

Concerns about anthropogenic climate change have generated an interest in low global warming potential (GWP) refrigerants and have spawned policies and regulations that encourage the transition to low GWP refrigerants. Recent research has largely focused on hydrofluoroolefins (HFOs), including R-1234yf (GWP = 4) as a replacement for R-134a (GWP = 1430) in automotive air-conditioning applications. While R-1234yf and R-1234ze (GWP = 6) have been investigated theoretically as a replacements for R-134a in domestic refrigeration, there is a lack of experimental evidence. This paper gives experimental performance data for R-1234yf and R-1234ze as drop-in replacements for R134a in two household refrigerators one baseline and one advanced technology. An experiment was conducted to evaluate and compare the performance of R-134a to R-1234yf and R-1234ze, using AHAM standard HRF-1 to evaluate energy consumption. These refrigerants were tested as drop-in replacements, with no performance enhancing modifications to the refrigerators. In Refrigerator 1 and 2, R-1234yf had 2.7% and 1.3% higher energy consumption than R-134a, respectively. This indicates that R-1234yf is a suitable drop-in replacement for R-134a in domestic refrigeration applications. In Refrigerator 1 and 2, R-1234ze had 16% and 5.4% lower energy consumption than R-134a, respectively. In order to replace R-134a with R-1234ze in domestic refrigerators the lower capacity would need to be addressed, thus R-1234ze might not be suitable for drop-in replacement.

Karber, Kyle M [ORNL; Abdelaziz, Omar [ORNL; Vineyard, Edward Allan [ORNL

2012-01-01T23:59:59.000Z

255

Microsoft Word - CX-GrandCouleeDistrictWoodPoleReplacementsAccessRoadsFY13_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

KEPR-Bell-1 SUBJECT: Environmental Clearance Memorandum Todd Wehner Civil Design/Access Roads - TELF-TPP-3 James Semrau Project Manager - TEP-TPP-1 Proposed Action: Wood pole replacement, equipment landing construction, and access road improvements along various transmission lines in Bonneville Power Administration's (BPA) Grand Coulee District. PP&A Project No.: 2152 (Grand Coulee-Chief Joseph No. 1), 2151 (Grand Coulee-Chief Joseph No. 2), 2121 (Grand Coulee-Foster Creek No. 1) and 1776 (Grand Coulee-Okanogan No. 2) Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance Location: Douglas and Okanogan counties, Washington. Refer to table below for project locations: Line Name Structure Township Range Section County

256

Investigation of Cooling and Dehumidification Energy Use and Indoor Thermal Conditions in Polk County Schools Permanent Replacement Classroom Buildings  

E-Print Network (OSTI)

Increasing enrollment in grades K-12 coupled with the spiraling costs of construction has pushed school boards to develop more cost-effective classrooms, from the perspective of initial cost, longterm energy consumption, and ease of maintenance. To this end, the Florida's Polk County School Board has developed a four-quad permanent replacement classroom building. Each classroom is equipped with a package terminal heat pump (PTHP) with a thermostat control with a four-hour crank timer. The objective of this research was to compare the energy consumption and interior conditions of the autoclaved aerated concrete (AAC) construction with an unvented roof assembly to that of the conventional metal framing and concrete panel buildings. Four buildings, 2 metal-framed and 2 AAC buildings with dehumidifiers were chosen for extensive testing and monitoring. The goal was to maintain a relative humidity of 50% as well as an interior temperature of 75oF.

Moyer, N. A.; Cummings, J. B.; Chasar, D.

2002-01-01T23:59:59.000Z

257

Conceptual Design for Replacement of the DTL and CCL with Superconducting RF Cavities in the Spallation Neutron Source Linac  

Science Conference Proceedings (OSTI)

The Spallation Neutron Source Linac utilizes normal conducting RF cavities in the low energy section from 2.5 MeV to 186 MeV. Six Drift Tube Linac (DTL) structures accelerate the beam to 87 MeV, and four Coupled Cavity Linac (CCL) structures provide further acceleration to 186 MeV. The remainder of the Linac is comprised of 81 superconducting cavities packaged in 23 cryomodules to provide final beam energy of approximately 1 GeV. The superconducting Linac has proven to be substantially more reliable than the normal conducting Linac despite the greater number of stations and the complexity associated with the cryogenic plant and distribution. A conceptual design has been initiated on a replacement of the DTL and CCL with superconducting RF cavities. The motivation, constraints, and conceptual design are presented.

Champion, Mark S [ORNL; Doleans, Marc [ORNL; Kim, Sang-Ho [ORNL

2013-01-01T23:59:59.000Z

258

Replacement Capability for Disposal of Remote-Handled Low-Level Waste Generated at the Department of Energys Idaho Site  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Environmental Assessment Environmental Assessment for the Replacement Capability for Disposal of Remote-Handled Low-Level Radioactive Waste Generated at the Department of Energy's Idaho Site August 2011 DOE/EA-1793 Draft Environmental Assessment for the Replacement Capability for Disposal of Remote-Handled Low-Level Radioactive Waste Generated at the Department of Energy's Idaho Site August 2011 v EXECUTIVE SUMMARY The U.S. Department of Energy (DOE) proposes to provide replacement capability for disposal of remote-handled low-level radioactive waste (LLW) generated at the Idaho National Laboratory (INL) site beginning in October 2017. Historically, INL has disposed of this LLW onsite. However, the existing disposal area located within the INL Radioactive Waste Management Complex will undergo

259

ONLINE FIRST ORIGINAL INVESTIGATION Timing of Acute Myocardial Infarction in Patients Undergoing Total Hip or Knee Replacement A Nationwide Cohort Study  

E-Print Network (OSTI)

Background: Limited evidence suggests that the risk of acute myocardial infarction (AMI) may be increased shortly after total hip replacement (THR) and total knee replacement (TKR) surgery. However, risk of AMI in these patients has not been compared against matched controls who have not undergone surgery. The objective of this study was to evaluate the timing of AMI in patients undergoing THR or TKR surgery compared with matched controls. Methods: Retrospective, nationwide cohort study within the Danish national registries. All patients who underwent a primary THR or TKR (n=95 227) surgery from

Arief Lalmohamed; Pharmd Peter Vestergaard; Dmsc Corinne Klop; Tjeerd P. Van Staa

1998-01-01T23:59:59.000Z

260

Cal Poly Initiates R-407C Chiller Replacement: Commercial Cooling Update--Case Study in Southern California Edison Territory, Issue 4, June 1996  

Science Conference Proceedings (OSTI)

Southern California Edison and EPRI have teamed with students at California State Polytechnic University in Pomona (Cal Poly) to evaluate the performance of what is thought to be the first chiller in the United States using R-407C, a promising replacement for HCFC-22. Once optimized, the 160-ton screw chiller should reduce annual energy use by 44% compared to the 24-year old, 204-ton CFC-11 unit it replaces, while providing a 6.7 year payback. Researchers are currently focusing on testing--which began in...

1996-07-02T23:59:59.000Z

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

CX-005857: Categorical Exclusion Determination | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7: Categorical Exclusion Determination 7: Categorical Exclusion Determination CX-005857: Categorical Exclusion Determination Upgrade Sections A, B, C, and D Service Elevators in Building 773-A CX(s) Applied: B1.3 Date: 03/22/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office Install a double-bottom cylinder to replace the existing single-bottom cylinder on Service Elevators in Section A, B, C, and D in Building 773-A. In addition the hydraulic power unit which consist of the tank, pump motor and hydraulic valve will be replaced which will make the hydraulic system more efficient and reliable. Disposal of existing elevator components is the responsibility of Savannah River Nuclear Solutions. Replacement cylinder shall be furbished per applicable Site and National Codes and

262

Impact evaluation of an induction furnace replacement under the Energy $avings Plan at Mackenzie Specialty Castings, Incorporated  

SciTech Connect

This impact evaluation of an induction furnace replacement that was recently installed at Mackenzie Specialty Castings, Incorporated (Mackenzie Castings) was conducted for the Bonneville Power Administration (Bonneville) as part of an evaluation of its Energy Savings Plan (ESP) Program. The project consists of replacing old power supplies and induction furnace with new, more efficient supplies and equipment. The objective of this impact evaluation was to assess how much electrical energy is being saved at Mackenzie Castings as a result of the ESP and to determine how much the savings cost Bonneville and the region. The impact of the project was evaluated with a combination of engineering analysis, financial analysis, interviews, and submittal reviews (Mackenzie Castings`s proposal and completion report). Based on this impact evaluation, energy savings from this project are expected to be 425,257 kWh/yr at minimum annual production, 647,037 kWh/yr at typical annual production, and 1,294,074 kWh/yr at maximum annual production, or 0.05, 0.07, and 0.15 average megawatts, respectively. On a per-ton basis, this project will save 608 kWh/ton or 31% at minimum production and 431 kWh/ton or 39% at typical and maximum production. The project cost $277,110 to install, and Mackenzie Castings received payment of $102,551 (in 1993 dollars) from Bonneville for acquisition of the energy savings. The real levelized cost of these energy savings to Bonneville is 22.9 mills/kWh at minimum production, 15.1 mills/kWh typical production, and 7.5 mills/kWh at maximum production (in 1993 dollars) over the project`s assumed 15-year life. The real levelized cost to the region is 59.1 mills/kWh at minimum production, 38.8 mills/kWh at typical production, and 19.4 mills/kWh at maximum production in 1993 dollars, not including transmission and distribution effects.

Oens, M.A.; Spanner, G.E.

1994-04-01T23:59:59.000Z

263

Replace with Client Name  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Department of Energy Department of Energy Golden Field Office 1617 Cole Boulevard Golden, Colorado 80401 INEOS New Planet BioEnergy, LLC Commercial Scale Integrated Demonstration BioEnergy Center Vero Beach, Florida Final Environmental Assessment September 2010 DOE/EA 1773 i  Table of Contents Section 1 Introduction 1.1 Overview of the Proposed Action .......................................................................... 1-1 1.2 National Environmental Policy Act ....................................................................... 1-1 1.3 Purpose and Need .................................................................................................... 1-2 1.4 Public Scoping and Agency Consultation ............................................................. 1-3

264

Neutron Detector Replacement Program  

Science Conference Proceedings (OSTI)

... Photograph credit: http://blog.dhs.gov/search/label/helium-3. Lead Organizational Unit: pml. Staff: NIST Contact: Muhammad Arif.

2013-07-22T23:59:59.000Z

265

Replacements Project Number  

NLE Websites -- All DOE Office Websites (Extended Search)

CRSP 2010 SUPER - - CRSP REPL SUPER PROJECT NFGCR CRSP 2011 SUPER 734,787.44 CRSP RPL SUPER PROJECT 2011 PHS C0006B 15,564.06 PHS - DSW COMM FOR OCI PHSTOW 0001B 73,885.26...

266

REPLACEMENTS ARE IN SIGHT  

Science Conference Proceedings (OSTI)

... 3300 Mountain Road NE Albuquerque, NM 87106-1920 (505) 256-1463 and Lance Lankford, PE Environmental Management 3200 Peacekeeper ...

2011-10-20T23:59:59.000Z

267

PNNL: Capability Replacement Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

history. But it is much more than bricks, mortar, and scientific instrumentation. These facilities are essential to retaining capabilities and expertise developed and nurtured...

268

Environmental assessment of the brine pipeline replacement for the Strategic Petroleum Reserve Bryan Mound Facility in Brazoria County, Texas  

SciTech Connect

The Department of Energy (DOE) has prepared an environmental assessment (EA), DOE/EA-0804, for the proposed replacement of a deteriorated brine disposal pipeline from the Strategic Petroleum Reserve (SPR) Bryan Mound storage facility in Brazoria County, Texas, into the Gulf of Mexico. In addition, the ocean discharge outfall would be moved shoreward by locating the brine diffuser at the end of the pipeline 3.5 miles offshore at a minimum depth of 30 feet. The action would occur in a floodplain and wetlands; therefore, a floodplain/wetlands assessment has been prepared in conjunction with this EA. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969 (42 USC. 4321, et seg.). Therefore, the preparation of an Environmental Impact Statement (EIS) is not required, and the Department is issuing this Finding of No Significant Impact (FONSI). This FONSI also includes a Floodplain Statement of Findings in accordance with 10 CFR Part 1022.

Not Available

1993-09-01T23:59:59.000Z

269

Environmental Assessment for the Strategic Petroleum Reserve West Hackberry Facility Raw Water Intake Pipeline Replacement Cameron and Calcasieu Parishes, Louisiana  

Science Conference Proceedings (OSTI)

The proposed action and three alternatives, including a No Build alternative, were evaluated along the existing RWIPL alignment to accommodate the placement of the proposed RWIPL. Construction feasibility, reasonableness and potential environmental impacts were considered during the evaluation of the four actions (and action alternatives) for the proposed RWIPL activities. Reasonable actions were identified as those actions which were considered to be supported by common sense and sound technical principles. Feasible actions were those actions which were considered to be capable of being accomplished, practicable and non-excessive in terms of cost. The evaluation process considered the following design specifications, which were determined to be important to the feasibility of the overall project. The proposed RWIPL replacement project must therefore: (1) Comply with the existing design basis and criteria, (2) Maintain continuity of operation of the facility during construction, (3)Provide the required service life, (4) Be cost effective, (5)Improve the operation and maintenance of the pipeline, and (6) Maintain minimal environmental impact while meeting the performance requirements. Sizing of the pipe, piping construction materials, construction method (e.g., open-cut trench, directional drilling, etc.) and the acquisition of new Right-of-Way (ROW) were additionally evaluated in the preliminary alternative identification, selection and screening process.

N /A

2004-08-31T23:59:59.000Z

270

Proceedings of Institute of Mathematics of NAS of Ukraine 2004, Vol. 50, Part 3, 13901395 Numerical Simulation of Replacing Oil by Water  

E-Print Network (OSTI)

­1395 Numerical Simulation of Replacing Oil by Water in a Scale-Invariant Porous Medium Ekaterina P. KUROCHKINA with 2563 grid in spatial variables. 1 Introduction The interface of oil displaced by water is unstable a significant influence on the transport of water and oil. The permeability heterogenei- ty is often identified

Popovych, Roman

271

Inspection and Replacement of Baffle to Former Bolts at Point Beach-2 and Ginna Processes, Equipment Design, and Equipment Qualifica tion  

Science Conference Proceedings (OSTI)

Incidences of cracking in some earlier design European PWRs have demonstrated that the reactor vessel internals bolting may be susceptible to age-related degradation. The primary cracking mechanism is likely irradiation assisted stress corrosion cracking (IASCC). This report describes an innovative bolt inspection and replacement program developed by Westinghouse two-loop plant owners and Framatome Technologies to address the aging problem.

2000-02-24T23:59:59.000Z

272

High Level Waste Tank Farm Replacement Project for the Idaho Chemical Processing Plant at the Idaho National Engineering Laboratory. Environmental Assessment  

Science Conference Proceedings (OSTI)

The Department of Energy (DOE) has prepared an environmental assessment (EA), DOE/EA-0831, for the construction and operation of the High-Level Waste Tank Farm Replacement (HLWTFR) Project for the Idaho Chemical Processing Plant located at the Idaho National Engineering Laboratory (INEL). The HLWTFR Project as originally proposed by the DOE and as analyzed in this EA included: (1) replacement of five high-level liquid waste storage tanks with four new tanks and (2) the upgrading of existing tank relief piping and high-level liquid waste transfer systems. As a result of the April 1992 decision to discontinue the reprocessing of spent nuclear fuel at INEL, DOE believes that it is unlikely that the tank replacement aspect of the project will be needed in the near term. Therefore, DOE is not proposing to proceed with the replacement of the tanks as described in this-EA. The DOE`s instant decision involves only the proposed upgrades aspect of the project described in this EA. The upgrades are needed to comply with Resource Conservation and Recovery Act, the Idaho Hazardous Waste Management Act requirements, and the Department`s obligations pursuant to the Federal Facilities Compliance Agreement and Consent Order among the Environmental Protection Agency, DOE, and the State of Idaho. The environmental impacts of the proposed upgrades are adequately covered and are bounded by the analysis in this EA. If DOE later proposes to proceed with the tank replacement aspect of the project as described in the EA or as modified, it will undertake appropriate further review pursuant to the National Environmental Policy Act.

Not Available

1993-06-01T23:59:59.000Z

273

Economic and Conservation Evaluation of Capital Renovation Projects: Brownsville Irrigation District 72" and 54" Pipeline Replacing Main Canal Preliminary  

E-Print Network (OSTI)

Initial construction costs and net annual changes in operating and maintenance expenses are identified for a single-component capital renovation project proposed by Brownsville Irrigation District to the North American Development Bank (NADB) and Bureau of Reclamation (BOR). The proposed project involves constructing a 72" and 54" pipeline to replace 2.29 miles of the Main Canal. Both nominal and real estimates of water and energy savings and expected economic and financial costs of those savings are identified throughout the anticipated 49-year useful life for the proposed project. Sensitivity results for both the cost of water savings and cost of energy savings are presented for several important parameters. Annual water and energy savings forthcoming from the total project are estimated, using amortization procedures, to be 1,844 ac-ft of water per year and 313,797,977 BTUs (91,969 kwh) of energy per year. The calculated economic and financial cost of water savings is estimated to be $24.70 per ac-ft. The calculated economic and financial cost of energy savings is estimated at $0.0001740 per BTU ($0.594 per kwh). In addition, expected real (rather than nominal) values are indicated for the Bureau of Reclamations three principal evaluation measures specified in the United States Public Law 106-576 legislation. The initial construction cost per ac-ft of water savings measure is $56.74 per ac-ft of water savings. The initial construction cost per BTU (kwh) of energy savings measure is $0.0003335 per BTU ($1.138 per kwh). The ratio of initial construction costs per dollar of total annual economic savings is estimated to be -1.46.

Rister, M. Edward; Lacewell, Ronald D.; Sturdivant, Allen W.; Robinson, John R.C.; Popp, Michael C.

2003-07-01T23:59:59.000Z

274

Economic and Conservation Evaluation of Capital Renovation Projects: Brownsville Irrigation District 72" and 48" Pipeline Replacing Main Canal Final  

E-Print Network (OSTI)

Initial construction costs and net annual changes in operating and maintenance expenses are identified for a single-component capital renovation project proposed by Brownsville Irrigation District to the North American Development Bank (NADB) and Bureau of Reclamation (BOR). The proposed project involves constructing a 72" and 48" pipeline to replace 2.31 miles of the Main Canal. Both nominal and real estimates of water and energy savings and expected economic and financial costs of those savings are identified throughout the anticipated 49-year useful life for the proposed project. Sensitivity results for both the cost of water savings and cost of energy savings are presented for several important parameters. Annual water and energy savings forthcoming from the total project are estimated, using amortization procedures, to be 1,872 ac-ft of water per year and 318,479,103 BTUs (93,341 kwh) of energy per year. The calculated economic and financial cost of water savings is estimated to be $27.98 per ac-ft. The calculated economic and financial cost of energy savings is estimated at $0.0001933 per BTU ($0.660 per kwh). In addition, expected real (rather than nominal) values are indicated for the Bureau of Reclamations three principal evaluation measures specified in the United States Public Law 106-576 legislation. The initial construction cost per ac-ft of water savings measure is $58.60 per ac-ft of water savings. The initial construction cost per BTU (kwh) of energy savings measure is $0.0003444 per BTU ($1.175 per kwh). The ratio of initial construction costs per dollar of total annual economic savings is estimated to be -1.53.

Rister, M. Edward; Lacewell, Ronald D.; Sturdivant, Allen W.; Robinson, John R.C.; Popp, Michael C.

2003-10-01T23:59:59.000Z

275

 

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Install a double-bottom cylinder to replace the existing single-bottom cylinder on Service Elevators in Section A, B, C, and D in Building 773-A. In Install a double-bottom cylinder to replace the existing single-bottom cylinder on Service Elevators in Section A, B, C, and D in Building 773-A. In addition the hydraulic power unit which consist of the tank, pump motor and hydraulic valve will be replaced which will make the hydraulic system more efficent and reliable. Disposal of existing elevator components is the responsiblity of SRNS. Replacement cylinder shall be furbished per applicable Site and National Codes and Standards. Upgrade Sections A, B, C, and D Service Elevators in Building 773-A Savannah River Site Aiken South Carolina TC-A-2011-00041 , Rev.0 Mar 22, 2011 Andrew R. Grainger Digitally signed by Andrew R. Grainger DN: cn=Andrew R. Grainger, o=DOE-SR, ou=EQMD, email=drew.grainger@srs.gov, c=US

276

Replacing a 252Cf source with a neutron generator in a shuffler - a conceptual design performed with MCNPX  

SciTech Connect

The {sup 252}Cf shuffler has been widely used in nuclear safeguards and radioactive waste management to assay fissile isotopes, such as {sup 235}U or {sup 239}Pu, present in a variety of samples, ranging from small cans of uranium waste to metal samples weighing several kilograms. Like other non-destructive assay instruments, the shuffler uses an interrogating neutron source to induce fissions in the sample. Although shufflers with {sup 252}Cf sources have been reliably used for several decades, replacing this isotopic source with a neutron generator presents some distinct advantages. Neutron generators can be run in a continuous or pulsed mode, and may be turned off, eliminating the need for shielding and a shuffling mechanism in the shuffler. There is also essentially no dose to personnel during installation, and no reliance on the availability of {sup 252}Cf. Despite these advantages, the more energetic neutrons emitted from the neutron generator (141 MeV for D-T generators) present some challenges for certain material types. For example when the enrichment of a uranium sample is unknown, the fission of {sup 238}U is generally undesirable. Since measuring uranium is one of the main uses of a shuffler, reducing the delayed neutron contribution from {sup 238}U is desirable. Hence, the shuffler hardware must be modified to accommodate a moderator configuration near the source to tailor the interrogating spectrum in a manner which promotes sub-threshold fissions (below 1 MeV) but avoids the over-moderation of the interrogating neutrons so as to avoid self-shielding. In this study, where there are many material and geometry combinations, the Monte Carlo N-Particle eXtended (MCNPX) transport code was used to model, design, and optimize the moderator configuration within the shuffler geometry. The code is then used to evaluate and compare the assay performances of both the modified shuffler and the current {sup 252}Cf shuffler designs for different test samples. The matrix effect and the non-uniformity of the interrogating flux are investigated and quantified in each case. The modified geometry proposed by this study can serve s a guide in retrofitting shufflers that are already in use.

Schear, Melissa A [Los Alamos National Laboratory; Tobin, Stephen J [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

277

How to upgrade your incandescent light bulbs Many people are choosing replacements for their standard incandescent light bulbs to save money or energy, because they've heard of new LED  

E-Print Network (OSTI)

How to upgrade your incandescent light bulbs Many people are choosing replacements for their standard incandescent light bulbs to save money or energy, because they've heard of new LED options for replacement light bulbs, you probably noticed that you have many options and the alternative bulbs are more

Bystroff, Chris

278

Replacement Capability for Disposal of Remote-Handled Low-Level Waste Generated at the Department of Energys Idaho Site  

NLE Websites -- All DOE Office Websites (Extended Search)

93 93 Environmental Assessment for the Replacement Capability for Disposal of Remote-Handled Low-Level Radioactive Waste Generated at the Department of Energy's Idaho Site Final December 2011 Department of Energy Idaho Operations Office 1955 Fremont Avenue Idaho Falls, ID 83415 December 21, 2011 Dear Citizen: The U.S. Department of Energy (DOE) has completed the Final Environmental Assessment (EA) for the Replacement Capability for Disposal of Remote-Handled Low-Level Radioactive Waste Generated at the Department of Energy's Idaho Site and determined that a Finding of No Significant Impact (FONSI) is appropriate. The draft EA was made available for an 81-day public review and comment period on September 1,2011. DOE considered all comments made

279

Guideline for the Specification of Replacement and Spare AC Squirrel-Cage Induction Motors having Voltage Ratings of 2,300V to 13,20 0V  

Science Conference Proceedings (OSTI)

This specification was developed by the Application Working Group which is part of the Large Electric Motor Users Group (LEMUG). This specification was developed to assist electric motor owners who find themselves in the need of a replacement motor or have decided that they should obtain a spare motor for a motor that they have deemed to be critical to their process. Since many power plant motors were supplied in the late 1970s, many processes, suppliers, manufacturing, and testing standards have changed...

2005-12-23T23:59:59.000Z

280

Guide for the Specification of Replacement and Spare AC Squirrel-Cage Induction Motors Having Voltage Ratings Up to 600 V  

Science Conference Proceedings (OSTI)

This report was developed by the Electric Power Research Institute (EPRI) Large Electric Motor Users Group (LEMUG) Applications Working Group (AWG), which included motor engineers, consultants, and vendors. This report and the specification it contains provide a solid framework for procuring new or replacement low-voltage (up to 600 Vac) National Electrical Manufacturers Association (NEMA) T-frame squirrel-cage induction motors. This report draws from other industry sources, including NEMA MG-1 and ...

2013-05-31T23:59:59.000Z

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Performance of T12 and T8 Fluorescent Lamps and Troffers and LED Linear Replacement Lamps CALiPER Benchmark Report  

Science Conference Proceedings (OSTI)

The Department of Energy (DOE) Commercially Available LED Product Evaluation and Reporting (CALiPER) Program was established in 2006 to investigate the performance of light-emitting diode (LED) based luminaires and replacement lamps. To help users better compare LED products with conventional lighting technologies, CALiPER has also performed benchmark research and testing of traditional (i.e., non-LED) lamps and fixtures. This benchmark report addresses standard 4-foot fluorescent lamps (i.e., T12 and T8) and the 2-foot by 4-foot recessed troffers in which they are commonly used. This report also examines available LED replacements for T12 and T8 fluorescent lamps, and their application in fluorescent troffers. The construction and operation of linear fluorescent lamps and troffers are discussed, as well as fluorescent lamp and fixture performance, based on manufacturer data and CALiPER benchmark testing. In addition, the report describes LED replacements for linear fluorescent lamps, and compares their bare lamp and in situ performance with fluorescent benchmarks on a range of standard lighting measures, including power usage, light output and distribution, efficacy, correlated color temperature, and the color rendering index. Potential performance and application issues indicated by CALiPER testing results are also examined.

Myer, Michael; Paget, Maria L.; Lingard, Robert D.

2009-01-16T23:59:59.000Z

282

Alternatives to Diesel Fuel in California - Fuel Cycle Energy and Emission Effects of Possible Replacements Due to the TAC Diesel Particulate Decision  

DOE Green Energy (OSTI)

Limitations on petroleum-based diesel fuel in California could occur pursuant to the 1998 declaration by California's Air Resources Board (CARB) that the particulate matter component of diesel exhaust is a carcinogen, therefore a toxic air contaminant (TAC) subject to the state's Proposition 65. It is the declared intention of CARB not to ban or restrict diesel fuel, per se, at this time. Assuming no total ban, Argonne National Laboratory (ANL) explored two feasible ''mid-course'' strategies, each of which results in some degree of (conventional) diesel displacement. In the first case, with substantial displacement of compression ignition by spark ignition engines, diesel fuel is assumed admissible for ignition assistance as a pilot fuel in natural gas (NG)-powered heavy-duty vehicles. Gasoline demand in California increases by 32.2 million liters (8.5 million gallons) per day overall, about 21 percent above projected 2010 baseline demand. Natural gas demand increases by 13.6 million diesel liter (3.6 million gallon) equivalents per day, about 7 percent above projected (total) consumption level. In the second case, ressionignition engines utilize substitutes for petroleum-based diesel having similar ignition and performance properties. For each case we estimated localized air emission plus generalized greenhouse gas and energy changes. Fuel replacement by di-methyl ether yields the greatest overall reduction in NOx emissions, though all scenarios bring about PM10 reductions relative to the 2010 baseline, with greatest reductions from the first case described above and the least from fuel replacement by Fischer-Tropsch synthetic diesel. Economic implications of vehicle and engine replacement were not formally evaluated.

Christopher L. Saraicks; Donald M. Rote; Frank Stodolsky; James J. Eberhardt

2000-05-01T23:59:59.000Z

283

Alternatives to diesel fuel in California - fuel cycle energy and emission effects of possible replacements due to the TAC diesel particulate decision.  

DOE Green Energy (OSTI)

Limitations on petroleum-based diesel fuel in California could occur pursuant to the 1998 declaration by California's Air Resources Board (CARB) that the particulate matter component of diesel exhaust is a carcinogen, therefore a toxic air contaminant (TAC) subject to the state's Proposition 65. It is the declared intention of CARB not to ban or restrict diesel fuel per se, at this time. Assuming no total ban, Argonne National Laboratory (ANL) explored two feasible mid-course strategies, each of which results in some degree of (conventional) diesel displacement. In the first case, with substantial displacement of compression-ignition by spark-ignition engines, diesel fuel is assumed admissible for ignition assistance as a pilot fuel in natural gas (NG)-powered heavy-duty vehicles. Gasoline demand in California increases by 32.2 million liters (8.5 million gallons) per day overall, about 21% above projected 2010 baseline demand. Natural gas demand increases by 13.6 million diesel liter (3.6 million gallon) equivalents per day, about 7% above projected (total) consumption level. In the second case, compression-ignition engines utilize substitutes for petroleum-based diesel having similar ignition and performance properties. For each case the authors estimated localized air emission plus generalized greenhouse gas and energy changes. Fuel replacement by di-methyl ether yields the greatest overall reduction in NOX emissions, though all scenarios bring about PM{sub 10} reductions relative to the 2010 baseline, with greatest reductions from the first case described above and the least from fuel replacement by Fischer-Tropsch synthetic diesel. Economic implications of vehicle and engine replacement were not formally evaluated.

Saricks, C. L.; Rote, D. M.; Stodolsky, F.; Eberhardt, J. J.

1999-12-03T23:59:59.000Z

284

Final Environmental Impact Statement for the Chemistry and Metallurgy Research Building Replacement Project at Los Alamos National Laboratory, Los Alamos, New Mexico  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

APPENDIX A ENVIRONMENTAL IMPACTS METHODOLOGIES This appendix briefly describes the methods used to assess the potential direct, indirect, and cumulative effects of the alternatives in this Environmental Impact Statement for the Chemistry and Metallurgy Research Building Replacement Project at Los Alamos National Laboratory (CMRR EIS). Included are impact assessment methods for land use and visual resources, site infrastructure, air quality, noise, geology and soils, surface and groundwater, water quality, ecological resources, cultural and paleontological resources, socioeconomics, waste management and pollution prevention, and cumulative impacts. Each section includes descriptions of the affected resources, region of influence, and impact assessment methods. Descriptions of the

285

Does preservation of the sub-valvular apparatus during mitral valve replacement affect long-term survival and quality of life? A Microsimulation Study  

E-Print Network (OSTI)

ral ssBioMed CentJournal of Cardiothoracic Surgery Open AcceResearch article Does preservation of the sub-valvular apparatus during mitral valve replacement affect long-term survival and quality of life? A Microsimulation Study Christopher Rao1... - cally feasible [5] we felt it was important to quantify; 1. What effect does SVP has on long-term survival? 2. Does SVP affect long-term Health-Related Quality of Life (HRQoL)? In order to address these questions we use a microsimula- tion model...

Rao, Christopher; Hart, Jonathan; Chow, Andre; Siannis, Fotios; Tsalafouta, Polyxeni; Murtuza, Bari; Darzi, Ara; Wells, Frank C; Athanasiou, Thanos

2008-04-23T23:59:59.000Z

286

Replacement Capability for Disposal of Remote-Handled Low-Level Waste Generated at the Department of Energys Idaho Site  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FINDING OF NO SIGNIFICANT IMPACT FINDING OF NO SIGNIFICANT IMPACT FOR THE ENVIRONMENTAL ASSESSMENT FOR THE REPLACEMENT CAPABILITY FOR THE DISOPOSAL OF REMOTE-HANDLED LOW-LEVEL RADIOACTIVE WASTE GENERATED AT THE DEPARTMENT OF ENERGY'S IDAHO SITE Agency: U. S. Department of Energy (DOE) Action: Finding ofNo Significant Impact (FONSI) Summary: Operations conducted in support ofIdaho National Laboratory (INL) and Naval Reactors Facility (NRF) missions on the Idaho site generate low-level radioactive waste (LL W). DOE classifies some of the LL W generated at the INL as remote-handled LL W because its potential radiation dose is high enough to require additional protection of workers using distance and shielding. Remote-handled wastes are those with radiation levels exceeding 200 millirem

287

Draft Environmental Impact Statement for the Chemistry and Metallurgy Research Building Replacement Project at Los Alamos National Laboratory, Los Alamos, New Mexico  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

o o n c e p t u a l D r a w i n g of t h e C M R R F a c i l i t y Draft Environmental Impact Statement For the Chemistry and Metallurgy Research Building Replacement Project at Los Alamos National Laboratory, Los Alamos, New Mexico DOE/EIS-0350D May 2003 SUMMARY CMR Building TA-6 TA-55 U.S. Department of Energy National Nuclear Security Administration Los Alamos Site Office General questions regarding this EIS or for a copy of this EIS, please contact: AVAILABILITY OF THE DRAFT CMRR EIS Printed with soy ink on recycled paper Elizabeth Withers, EIS Document Manager U.S. Department of Energy Office of Los Alamos Site Operations 528 35th Street Los Alamos, New Mexico 87544-2201 Telephone: 1-877-491-4957 National Nuclear Security Administration iii COVER SHEET Responsible Agency: United States Department of Energy (DOE), National Nuclear Security

288

Monitoring and evaluation of replacing low-efficiency air conditioners with high-efficiency air conditioners in single-family detached houses in Austin, Texas  

SciTech Connect

The US DOE initiated this project to evaluate the performance of an air conditioner retrofit program in Austin, Texas. The City's Austin's Resource Management Department pursued this project to quantify the retrofit effect of replacing low-efficiency air conditioners with high-efficiency air conditioners in single-family detached homes. If successfully implemented, this retrofit program could help defer construction of a new power plant which is a major goal of this department. The project compares data collected from 12 houses during two cooling seasons under pre-retrofit and then post-retrofit air conditioner units. The existing low-efficiency air conditioners were monitored during the 1987 cooling season, replaced during the 1987--88 heating season with new, smaller sized, high-efficiency units, and then monitored again during the 1988 cooling season. Results indicated that the air conditioner retrofits reduce the annual air conditioner electric consumption and peak electric demand by an average of 38%. When normalized to the nominal capacity of the air conditioner, average demand savings were 1.12 W/ft{sup 2} and estimated annual energy savings were 1.419 kWh/ft{sup 2}. Individual air conditioner power requirements were found to be a well defined function of outdoor temperature as expected. In the absence of detailed data, estimates of the peak demand reductions of new air conditioners can be made from the manufacturer's specifications. Air conditioner energy consumption proved to be strongly linear as a function of the outdoor temperature as expected when taken as an aggregate. No noticeable differences in the diversity factor of the air conditioner usage were found. Analysis of the retrofit effect using PRISM yields estimates of the reduction in normalized annual consumption (NAC) and annual cooling consumption of 12% and 30%. 2 refs., 11 figs., 17 tabs.

Burns, R.; Hough, R.E. (Fleming (W.S.) and Associates, Inc., Syracuse, NY (United States))

1991-10-01T23:59:59.000Z

289

Finding of No Significant Impact for the Environmental Assessment for the Strategic Petroleum Reserve West Hackberry Facility Raw Water Intake Pipeline Replacement Cameron and Calcasieu Parishes, Louisiana  

SciTech Connect

DOE has prepared an Environmental Assessment (EA), DOE/EA-1497, for the proposed replacement of the existing 107 centimeter (cm) [42 inch (in)] 6.87 kilometer (km) [4.27 mile (mi)] raw water intake pipeline (RWIPL). This action is necessary to allow for continued, optimum operations at the West Hackberry facility (main site/facility). The EA described the proposed action (including action alternatives) and three alternatives to the proposed action. The EA evaluated only the potential environmental consequences of the proposed action (one action alternative), and Alternative 3, which consisted of the No Build Action that is required by 10 CFR 1021.321(c). Based on the analysis in DOE/EA-1497, DOE has determined that the proposed action does not constitute a major Federal action significantly affecting humans or the natural environment within the meaning of the National Environmental Policy Act of 1969 (NEPA), 42 USC 4321 et seq. Therefore, an Environmental Impact Statement (EIS) is not required, and DOE is issuing this Finding of No Significant Impact (FONSI). To further minimize impacts to environmental media, the DOE will also implement a Mitigation Action Plan (MAP) for this action. The MAP is included as Appendix F of this EA, which is appended to this FONSI. The Energy Policy and Conservation Act of 1975 (EPCA), as amended, authorizes the creation of the Strategic Petroleum Reserve (SPR) to store crude oil to reduce the United States' vulnerability to energy supply disruptions. Crude oil is stored in geologic formations, or salt domes, located under these facilities. The purpose of this proposed project is to construct a new RWIPL at the main site to replace the existing RWIPL which services this facility.

2004-08-31T23:59:59.000Z

290

Finding of No Significant Impact for the Environmental Assessment for the Strategic Petroleum Reserve West Hackberry Facility Raw Water Intake Pipeline Replacement Cameron and Calcasieu Parishes, Louisiana  

SciTech Connect

DOE has prepared an Environmental Assessment (EA), DOE/EA-1497, for the proposed replacement of the existing 107 centimeter (cm) [42 inch (in)] 6.87 kilometer (km) [4.27 mile (mi)] raw water intake pipeline (RWIPL). This action is necessary to allow for continued, optimum operations at the West Hackberry facility (main site/facility). The EA described the proposed action (including action alternatives) and three alternatives to the proposed action. The EA evaluated only the potential environmental consequences of the proposed action (one action alternative), and Alternative 3, which consisted of the No Build Action that is required by 10 CFR 1021.321(c). Based on the analysis in DOE/EA-1497, DOE has determined that the proposed action does not constitute a major Federal action significantly affecting humans or the natural environment within the meaning of the National Environmental Policy Act of 1969 (NEPA), 42 USC 4321 et seq. Therefore, an Environmental Impact Statement (EIS) is not required, and DOE is issuing this Finding of No Significant Impact (FONSI). To further minimize impacts to environmental media, the DOE will also implement a Mitigation Action Plan (MAP) for this action. The MAP is included as Appendix F of this EA, which is appended to this FONSI. The Energy Policy and Conservation Act of 1975 (EPCA), as amended, authorizes the creation of the Strategic Petroleum Reserve (SPR) to store crude oil to reduce the United States' vulnerability to energy supply disruptions. Crude oil is stored in geologic formations, or salt domes, located under these facilities. The purpose of this proposed project is to construct a new RWIPL at the main site to replace the existing RWIPL which services this facility.

N /A

2004-08-31T23:59:59.000Z

291

DOE/EIS-0350-SA-01: Supplement Analysis for Environmental Impact Statement for the Chemistry and Metallurgy Research Building Replacement (CMRR) Project at Los Alamos National Laboratory, Los Alamos, NM (01/05)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SA-01 SA-01 Supplement Analysis Environmental Impact Statement for the Chemistry and Metallurgy Research Building Replacement (CMRR) Project at Los Alamos National Laboratory, Los Alamos, New Mexico Changes to the Location of the CMRR Facility Components January 2005 Department of Energy National Nuclear Security Administration Los Alamos Site Office Supplement Analysis Introduction This Supplement Analysis (SA) has been prepared to determine if the Environmental Impact Statement for the Chemistry and Metallurgy Research Building Replacement Project at Los Alamos National Laboratory (CMRR EIS) (DOE/EIS-0350) adequately addresses the environmental effects of proposed changes in the location of certain components of the Preferred Alternative that the National Nuclear Security

292

Anterior Myocardial Territory May Replace the Heart as Organ at Risk in Intensity-Modulated Radiotherapy for Left-Sided Breast Cancer  

SciTech Connect

Purpose: We investigated whether the heart could be replaced by the anterior myocardial territory (AMT) as the organ at risk (OAR) in intensity-modulated radiotherapy (IMRT) of the breast for patients with left-sided breast cancer. Methods and Materials: Twenty-three patients with left-sided breast cancer who received postoperative radiation after breast-conserving surgery were studied. For each patient, we generated five IMRT plans including heart (H), left ventricle (LV), AMT, LV+AMT, and H+LV as the primary OARs, respectively, except both lungs and right breast, which corresponded to IMRT(H), IMRT(LV), IMRT(AMT), IMRT(LV+AMT), and IMRT(H+LV). For the planning target volumes and OARs, the parameters of dose-volume histograms were compared. Results: The homogeneity index, conformity index, and coverage index were not compromised significantly in IMRT(AMT), IMRT(LV) and IMRT(LV+ AMT), respectively, when compared with IMRT(H). The mean dose to the heart, LV, and AMT decreased 5.3-21.5% (p < 0.05), 19.9-29.5% (p < 0.05), and 13.3-24.5% (p < 0.05), respectively. Similarly, the low (e.g., V5%), middle (e.g., V20%), and high (e.g., V30%) dose-volume of the heart, LV, and AMT decreased with different levels. The mean dose and V10% of the right lung increased by 9.2% (p < 0.05) and 27.6% (p < 0.05), respectively, in IMRT(LV), and the mean dose and V5% of the right breast decreased significantly in IMRT(AMT) and IMRT(LV+AMT). IMRT(AMT) was the preferred plan and was then compared with IMRT(H+LV); the majority of dose-volume histogram parameters of OARs including the heart, LV, AMT, both lungs, and the right breast were not statistically different. However, the low dose-volume of LV increased and the middle dose-volume decreased significantly (p < 0.05) in IMRT(AMT). Also, those of the right lung (V10%, V15%) and right breast (V5%, V10%) decreased significantly (p < 0.05). Conclusions: The AMT may replace the heart as the OAR in left-sided breast IMRT after breast-conserving surgery to decrease the radiation dose to the heart.

Tan Wenyong [Department of Radiotherapy, Hubei Cancer Hospital, Wuhan (China); Key Laboratory of Molecular Biophysics of the Ministry of Education, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan (China); Liu Dong [Department of Radiotherapy, Hubei Cancer Hospital, Wuhan (China); Xue Chenbin [Key Laboratory of Molecular Biophysics of the Ministry of Education, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan (China); Xu Jiaozhen; Li Beihui [Department of Radiotherapy, Hubei Cancer Hospital, Wuhan (China); Chen Zhengwang [Key Laboratory of Molecular Biophysics of the Ministry of Education, College of Life Science and Technology, Huazhong University of Science and Technology, Wuhan (China); Hu Desheng [Department of Radiotherapy, Hubei Cancer Hospital, Wuhan (China); Wang Xionghong, E-mail: tanwyym@yahoo.com.cn [Department of Radiotherapy, Hubei Cancer Hospital, Wuhan (China)

2012-04-01T23:59:59.000Z

293

Effects of Heat Stress and Increased Protein Fed in Milk Replacers on the Health and Growth Parameters of Neonatal Holstein Bull Calves  

E-Print Network (OSTI)

Objectives of the study were to evaluate if calves fed 6 L of high protein milk replacer (HPMR; 1135 g/d, 28% crude protein (CP), 20% fat) had improved performance and health as compared to calves fed 4 L of a conventional milk replacer (CMR; 454 g/d, 20% CP, 20% fat) in heat stress and non heat stress environments. Holstein bull calves (n=52) Water consumption (WC) in mL and starter intake (SI) in grams was measured daily. Feed conversion (FC) was also calculated for each nutritional treatment and environment. Fecal scores (FS) of 1 to 4 (1=hard, firm, 2=soft, firm, 3=no form, and 4=watery) were recorded daily. Calves with a FS of >3 were considered to have diarrhea and required treatment. Respiration rates (RR) were recorded at 0630 (AM) and 1830 (PM) to monitor respiratory challenges while rectal temperatures (RT) were also measured using a digital thermometer daily in AM and PM to monitor febrile events. If RT was greater than 39.2 degrees C for NHS calves and 39.7 degrees C for HS calves, they were treated for febrile events (FE). Data was analyzed using PROC MIXED (SAS 9.2). HPMR had a greater (P < 0.01) WH, HG, BL, HH, ADG, WC, and FS than the CMR (0.15 vs. 0.11, 0.37 vs. 0.28, 0.27 vs. 0.22, 0.21 vs. 0.14, 0.82 vs. 0.58, 4235 vs. 2656, and 2.05 vs. 1.73, respectively). HS had a greater (P < 0.01) WC than NHS (4365 vs. 2526, respectively). CMR had a greater SI and FC (P < 0.05) than HPMR (0.942 vs. 0.437, and 1.99 vs. 1.78, respectively). HS had a higher RT AM, RT PM, RR AM, and RR PM (P<0.01) than NHS (38.87 vs. 38.77, 39.03 vs. 38.79, 35.79 vs. 32.77, and 55.73 vs. 38.57, respectively. Calves in NHS had a higher FE (P<0.01) than the HS calves (6.24 vs. 2.33). There was no significant difference in growth parameters in HS or NHS in calves of like feeding strategies. The results show calves in HS experienced higher RT AM, RT PM, RR AM, and RR PM. The increased protein and energy fed to the HPMR calves resulted in greater FS and increased growth.

Krenek, Andrew

2011-08-01T23:59:59.000Z

294

Energy efficiency and appliance replacement  

E-Print Network (OSTI)

energy use and energy cost savings over time generally haveenergy costs, and incomes, as well as multiple varieties of appliances, changing technologies over time,

LaFrance, Jeffrey T.

2005-01-01T23:59:59.000Z

295

Envimnmental Aspects of Halon Replacements:  

Science Conference Proceedings (OSTI)

... In the work to be described subsequently, the modeling capabilities of LLNL and UINC were employed in order to convert the basic laboratory data ...

2011-10-18T23:59:59.000Z

296

Proposed replacement and operation of the anhydrous hydrogen fluoride supply and fluidized-bed reactor system at Building 9212. Draft environmental assessment  

SciTech Connect

The US Department of Energy (DOE) proposes to replace the existing anhydrous hydrogen fluoride (AHF) supply and fluidized-bed reactor systems for the Weapons Grade Highly Enriched Uranium Chemical Recovery and Recycle Facility, Building 9212, which is Iocated within the Y-12 Plant on DOE`s Oak Ridge Reservation in Oak Ridge, Tennessee. The current AHF supply and fluidized-bed reactor systems were designed and constructed more than 40 years ago. Because of their deteriorating condition, the corrosive nature of the materials processed, and the antiquated design philosophy upon which they are based, their long-term reliability cannot be assured. The current AHF supply system cannot mitigate an accidental release of AHF and vents fugitive AHF directly to the atmosphere during operations. the proposed action would reduce the risk of exposing the Y-12 Plant work force, the public, and the environment to an accidental release of AHF and would ensure the continuing ability of the Y-12 Plant to manufacture highly enriched uranium metal and process uranium from retired weapons for storage.

1995-03-01T23:59:59.000Z

297

Development of a pilot safety information document (PSID) for the replacement of radioactive liquid waste treatment facility at Los Alamos National Laboratory  

E-Print Network (OSTI)

Based on recent decisions made by Los Alamos National Laboratory concerning the development of site-wide National Environmental Policy Act documents, an effort was undertaken to develop a Pilot Safety Information Document (PSID) for the replacement Radioactive Liquid Waste Treatment Facility. The PSID documents risk analysis for the proposed facility and some of the alternatives, accident analysis, radioactive and hazardous material doses to off-site individuals, and the cumulative safety risk from adjacent facilities. In addition, this study also compared two methods for calculating the consequences of a radioactive spill. The methods compared were the Superfund model and the release fraction model. It was determined that the release fraction model gives a more realistic estimate of the doses incurred as the result of an accident, and that the Superfund model should be used for estimating the dose before and during the remediation effort. The cumulative safety risk was determined by calculating the exceedance probability if the individual dose from four geographically related facilities. The risk for cancer fatalities was determined to be within the DOE's Nuclear Safety Policy Goals.

Selvage, Ronald Derek

1995-01-01T23:59:59.000Z

298

Economic and Conservation Evaluation of Capital Renovation Projects: Hidalgo County Irrigation District No. 2 (San Juan) 48" Pipeline Replacing Wisconsin Canal Preliminary  

E-Print Network (OSTI)

Initial construction costs and net annual changes in operating and maintenance expenses are identified for a single-component capital renovation project proposed by Hidalgo County Irrigation District No. 2, (a.k.a. San Juan) to the North American Development Bank (NADBank) and Bureau of Reclamation. The proposed project involves constructing a 48" pipeline to replace the Wisconsin Canal. Both nominal and real estimates of water and energy savings and expected economic and financial costs of those savings are identified throughout the anticipated useful life for the proposed project. Sensitivity results for both the cost of water savings and cost of energy savings are presented for several important parameters. Annual water and energy savings forthcoming from the total project are estimated, using amortization procedures, to be 977 ac-ft of water per year and 372,892,700 BTUs (109,289 kwh) of energy per year. The calculated economic and financial cost of water savings is estimated to be $70.97 per ac-ft. The calculated economic and financial cost of energy savings is estimated at $0.0002124 per BTU ($0.725 per kwh). In addition, expected real (vs nominal) values are indicated for the Bureau of Reclamations three principal evaluation measures specified in the United States Public Law 106-576 legislation. The initial construction cost per ac-ft of water savings measure is $75.29 per ac-ft of water savings. The initial construction cost per BTU (kwh) of energy savings measure is $0.0001973 per BTU ($0.673 per kwh). The ratio of initial construction costs per dollar of total annual economic savings is estimated to be -3.12.

Rister, M. Edward; Lacewell, Ronald D.; Sturdivant, Allen W.; Robinson, John R.C.; Popp, Michael C.

2003-05-01T23:59:59.000Z

299

Economic and Conservation Evaluation of Capital Renovation Projects: Hidalgo County Irrigation District No. 2 (San Juan) - 48" Pipeline Replacing Wisconsin Canal - Final  

E-Print Network (OSTI)

Initial construction costs and net annual changes in operating and maintenance expenses are identified for a single-component capital renovation project proposed by Hidalgo County Irrigation District No. 2, (a.k.a. San Juan) to the North American Development Bank (NADBank) and Bureau of Reclamation. The proposed project involves constructing a 48" pipeline to replace the Wisconsin Canal. Both nominal and real estimates of water and energy savings and expected economic and financial costs of those savings are identified throughout the anticipated useful life for the proposed project. Sensitivity results for both the cost of water savings and cost of energy savings are presented for several important parameters. Annual water and energy savings forthcoming from the total project are estimated, using amortization procedures, to be 977 ac-ft of water per year and 372,892,700 BTUs (109,289 kwh) of energy per year. The calculated economic and financial cost of water savings is estimated to be $70.97 per ac-ft. The calculated economic and financial cost of energy savings is estimated at $0.0002124 per BTU ($0.725 per kwh). In addition, expected real (vs nominal) values are indicated for the Bureau of Reclamations three principal evaluation measures specified in the United States Public Law 106-576 legislation. The initial construction cost per ac-ft of water savings measure is $75.29 per ac-ft of water savings. The initial construction cost per BTU (kwh) of energy savings measure is $0.0001973 per BTU ($0.673 per kwh). The ratio of initial construction costs per dollar of total annual economic savings is estimated to be -3.12.

Rister, Edward; Lacewell, Ronald; Sturdivant, Allen; Robinson, John; Popp, Michael

2003-07-01T23:59:59.000Z

300

Savorphos as an All Natural Phosphate Replacer in Water and Oil Based Marinades for Rotisserie Birds and Boneless-Skinless Breast  

E-Print Network (OSTI)

As consumer demand for all-natural marinades increases, the need to replace phosphate with a natural product that can produce equivalent or improved yield in products such as but not limited to rotisserie chickens (RWOG) and boneless/skinless breast (BSB) is a challenge for processors. The objective of this study was to determine if using an all-natural non-phosphate blend (savorphos-200, SP) in water-based (WB) and oil-based (OB) marinades would perform better in quality and yield parameters than a commercial phosphate blend (PB). The treatments included WB+PB (water, 0.4% phosphate, 0.7% salt), WB+SP (water, 0.5% savorphos-200, 0.7% salt), OB+PB (water, 3% canola oil, 0.4% phosphate, 0.7% salt), and OB+SP (water, 3% oil, 0.5% savorphos-200, 0.7% salt). RWOG and BSB were injected with a multi-needle injector to 20% (wt/wt) pick-up at a constant pressure (15-20 psi). The parameters measured were marinade pick-up %, 20 min and 24 hr marinade retention %, and cook loss %. Color, tenderness, total moisture, and sensory test were conducted on BSB. Data were analyzed within marination type (WB and OB). Results for the RWOG indicated SP obtained higher pick-up yield (p0.05). Therefore, savorphos-200 can be used as a natural non-phosphate blend in water based marinades with no detriment to yield. In addition, savorphos-200 can be used as a natural non-phosphate blend in oil-based marinades with yield improvements.

Casco Montenegro, Gerardo

2013-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

 

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A radiation mapping dosimeter will be placed in a shielded cell in 773-A E-wing Shielded Cell Operations (SCO) facility for in-cell exposure to ambient A radiation mapping dosimeter will be placed in a shielded cell in 773-A E-wing Shielded Cell Operations (SCO) facility for in-cell exposure to ambient radiation. Either the RadBall or GrayQb technologies will be selected for deployment; details of these two radiation mapping technologies are discussed below. --The RadBall consists of an inner spherical core made of a radiation sensitive polymer and an outer tungsten based collimation sheath. --The GrayQb is a alternate type of radiation mapping dosimeter. The GrayQb replaces the polymer component of the RadBall with metallic components. The unit is fabricated from tungsten, aluminum, and a small amount of copper. Stainless steel is also utilized in the design. Radiation mapping dosimeter exposure in Shielded Cell in 773-A: RadBall and GrayQb technologies

302

 

NLE Websites -- All DOE Office Websites (Extended Search)

radiation mapping dosimeter will be placed in a shielded cell in 773-A E-wing Shielded Cell Operations (SCO) facility for in-cell exposure to ambient radiation mapping dosimeter will be placed in a shielded cell in 773-A E-wing Shielded Cell Operations (SCO) facility for in-cell exposure to ambient radiation. Either the RadBall or GrayQb technologies will be selected for deployment; details of these two radiation mapping technologies are discussed below. --The RadBall consists of an inner spherical core made of a radiation sensitive polymer and an outer tungsten based collimation sheath. --The GrayQb is a alternate type of radiation mapping dosimeter. The GrayQb replaces the polymer component of the RadBall with metallic components. The unit is fabricated from tungsten, aluminum, and a small amount of copper. Stainless steel is also utilized in the design. Radiation mapping dosimeter exposure in Shielded Cell in 773-A: RadBall and GrayQb technologies

303

DOE/EA-1497: Finding of No Significant Impact for the Environmental Assessment for the Strategic Petroleum Reserve West Hackberry Facility Raw Intake Pipeline Replacement Project, Cameron and Calcasieu Parishes, Louisiana (8/31/04)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FINDING OF NO SIGNIFICANT IMPACT FINDING OF NO SIGNIFICANT IMPACT RAW WATER INTAKE PIPELINE REPLACEMENT STRATEGIC PETROLEUM RESERVE WEST HACKBERRY FACILITY AGENCY: Department of Energy (DOE) ACTION: Finding of No Significant Impact (FONSI) SUMMARY: DOE has prepared an Environmental Assessment (EA), DOE/EA-1497, for the proposed replacement of the existing 107 centimeter (cm) [42 inch (in)] 6.87 kilometer (km) [4.27 mile (mi)] raw water intake pipeline (RWIPL). This action is necessary to allow for continued, optimum operations at the West Hackberry facility (main site/facility). The EA described the proposed action (including action alternatives) and three alternatives to the proposed action. The EA evaluated only the potential environmental consequences of

304

EIS-0350-S1: Supplemental Environmental Impact Statement for the Nuclear Facility Portion of the Chemistry and Metallurgy Research Building Replacement Project at Los Alamos National Laboratory, New Mexico  

Energy.gov (U.S. Department of Energy (DOE))

This Supplemental EIS evaluates the completion of the Chemistry and Metallurgy Research Building Replacement (CMRR) Project, which consists of constructing the nuclear facility portion (CMRR-NF) at Los Alamos National Laboratory (LANL). The CMRR Project provides the analytical chemistry and materials characterization capabilities currently or previously performed in the existing Chemistry and Metallurgy Research (CMR) Building. Because of recent detailed site geotechnical investigations, certain aspects of the CMRR-NR project have changed resulting in change to the environmental impacts.

305

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

July 16, 2013 July 16, 2013 CX-010858: Categorical Exclusion Determination Demolition of the 745-N Excess Equipment Pad CX(s) Applied: B1.23 Date: 07/16/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office July 16, 2013 CX-010857: Categorical Exclusion Determination Replace 735-A South Header Ductwork Located on D-wing Service Floor CX(s) Applied: B2.3 Date: 07/16/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office July 15, 2013 CX-010738: Categorical Exclusion Determination 2013 Spacer and Insulator Replacement Program; Third and Fourth Quarter Projects CX(s) Applied: B1.3 Date: 07/15/2013 Location(s): Washington, Washington, Washington Offices(s): Bonneville Power Administration July 15, 2013 CX-010717: Categorical Exclusion Determination

306

Operations, Maintenance, and Replacement 10-year plan, 1990-1999 : 1989 Utility OM&R Comparison : A Comparison of BPA (Bonneville Power Administration) and Selected Utility Transmission, Operations and Maintenance Costs.  

SciTech Connect

For the past several years, competing resource demands within BPA have forced the Agency to stretch Operations, Maintenance and Replacement (OM R) resources. There is a large accumulation of tasks that were not accomplished when scheduled. Maintenance and replacements and outages, due to material and equipment failure, appear to be increasing. BPA has made a strategic choice to increase its emphasis on OM R programs by implementing a multi-year, levelized OM R plan which is keyed to high system reliability. This strategy will require a long-term commitment of a moderate increase in staff and dollars allocated to these programs. In an attempt to assess the direction BPA has taken in its OM R programs, a utility comparison team was assembled in early January 1989. The team included representatives from BPA's Management Analysis, Internal Audit and Financial Management organizations, and operation and maintenance program areas. BPA selected four utilities from a field of more than 250 electric utilities in the US and Canada. The selection criteria generally pertained to size, with key factors including transformation capacity, load, gross revenue, and interstate transmission and/or marketing agreements, and their OM R programs. Information was gathered during meetings with managers and technical experts representing the four utilities. Subsequent exchanges of information also took place to verify findings. The comparison focused on: Transmission operations and maintenance program direction and emphasis; Organization, management and implementation techniques; Reliability; and Program costs. 2 figs., 21 tabs.

United States. Bonneville Power Administration.

1990-09-01T23:59:59.000Z

307

Notice of Availability of the Draft Environmental Impact Statement for the Proposed Chemistry and Metallurgy Research Building Replacement Project at Los Alamos National Laboratory, Los Alamos, NM (DOE/EIS-0350)(5/15/03)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

96 96 Federal Register / Vol. 68, No. 94 / Thursday, May 15, 2003 / Notices [FR Doc. 03-12161 Filed 5-14-03; 8:45 am] BILLING CODE 6450-01-P DEPARTMENT OF ENERGY National Nuclear Security Administration Notice of Availability of the Draft Environmental Impact Statement for the Proposed Chemistry and Metallurgy Research Building Replacement Project at Los Alamos National Laboratory, Los Alamos, NM AGENCY: U.S. Department of Energy, National Nuclear Security Administration. ACTION: Notice of availability and public hearings. SUMMARY: Pursuant to the National Environmental Policy Act (NEPA) of 1969, as amended (42 U.S.C. 4321 et seq.), and the DOE Regulations Implementing NEPA (10 CFR part 1021), the National Nuclear Security Administration (NNSA), an agency

308

Remotely replaceable tokamak plasma limiter tiles  

DOE Patents (OSTI)

U-shaped tiles placed end-to-end over a pair of parallel runners have two rods which engage L-shaped slots. A sliding bar between the runners has grooves with clips to retain the rods pressed into receiving legs of the L-shaped slots in the runners. Sliding the bar in the direction of retaining legs of the L-shaped slots latches the tiles in place over the wall. Resilient contact strips under the parallel sides of the U-shaped tile assure thermal and electrical contact with the wall. 6 figs.

Gallix, R.

1987-12-09T23:59:59.000Z

309

Replacement-3 Wholesale Power Rate Schedule  

Energy.gov (U.S. Department of Energy (DOE))

Area: Virginia, North Carolina, Tennessee, Georgia, Alabama, Mississippi, Kentucky, southern Illinois System: CU

310

Replacing the Rare Earth Intellectual Capital  

SciTech Connect

The rare earth crisis slowly evolved during a 10 to 15 year period beginning in the mid-1980s, when the Chinese began to export mixed rare earth concentrates. In the early 1990s, they started to move up the supply chain and began to export the individual rare earth oxides and metals. By the late 1990s the Chinese exported higher value products, such as magnets, phosphors, polishing compounds, catalysts; and in the 21st century they supplied finished products including electric motors, computers, batteries, liquid-crystal displays (LCDs), TVs and monitors, mobile phones, iPods and compact fluorescent lamp (CFL) light bulbs. As they moved to higher value products, the Chinese slowly drove the various industrial producers and commercial enterprises in the US, Europe and Japan out of business by manipulating the rare earth commodity prices. Because of this, the technically trained rare earth engineers and scientists who worked in areas from mining to separations, to processing to production, to manufacturing of semifinished and final products, were laid-off and moved to other fields or they retired. However, in the past year the Chinese have changed their philosophy of the 1970s and 1980s of forming a rare earth cartel to control the rare earth markets to one in which they will no longer supply the rest of the world (ROW) with their precious rare earths, but instead will use them internally to meet the growing demand as the Chinese standard of living increases. To this end, they have implemented and occasionally increased export restrictions and added an export tariff on many of the high demand rare earth elements. Now the ROW is quickly trying to start up rare earth mines, e.g. Molycorp Minerals in the US and Lynas Corp. in Australia, to cover this shortfall in the worldwide market, but it will take about five years for the supply to meet the demand, even as other mines in the ROW become productive. Unfortunately, today there is a serious lack of technically trained personnel to bring the entire rare earth industry, from mining to original equipment manufacturers (OEM), up to full speed in the next few years. Accompanying this decline in technical expertise, innovation and new products utilizing rare earth elements has slowed dramatically, and it may take a decade or more to recapture America's leading role in technological advancements of rare earth containing products. Before the disruption of the US rare earth industry, about 25,000 people were employed in all aspects of the industry from mining to OEM. Today, only about 1,500 people are employed in these fields. The ratio of non-technically trained persons to those with college degrees in the sciences or engineering varies from about 8 to 1 to about 4 to 1, depending on the particular area of the industry. Assuming an average of 6 to 1, the number of college degree scientists and engineers has decreased from about 4,000 to 250 employed today. In the magnetic industry the approximate numbers are: 6,000 total with 750 technically trained people in the 1980s to 500 totally employed today of which 75 have degrees. The paucity of scientists and engineers with experience and/or training in the various aspects of production and commercialization of the rare earths is a serious limitation to the ability of the US to satisfy its own needs for materials and technologies (1) to maintain our military strength and posture, (2) to assume leadership in critical energy technologies, and (3) to bring new consumer products to the marketplace. The lack of experts is of even greater national importance than the halting in the 1990s and the recent restart of the mining/benification/separation effort in the US; and thus governmental intervention and support for at least five to 10 years will be required to ameliorate this situation. To respond quickly, training programs should be established in conjunction with a national research center at an educational institution with a long tradition in multiple areas of rare earth and other critical elements research and technology. This center should

Gschneidner, Jr., Karl

2011-04-01T23:59:59.000Z

311

207_17 Fat Replacers: An Overview  

Science Conference Proceedings (OSTI)

AOCS Press, Urbana, IL 61802 2006 by AOCS Press. All rights reserved. No part of this PDF may be repro-

312

PROGRESS TOWARD REPLACING HALON 2402 FOR ...  

Science Conference Proceedings (OSTI)

... indicate that all perchlorates examined may have ... Thermodynamic Data (TRCI'HERMO), the NMERI ... and nitrogen tetroxide experimental data. ...

2011-10-11T23:59:59.000Z

313

Native Shade Trees to Replace Elms  

NLE Websites -- All DOE Office Websites (Extended Search)

by rows of stately graceful elms with arching limbs forming canopies like a cathedral roof, are denuded now or lined with their gaunt skeletons. Champaign originated as a...

314

REPLACEMENT OF HALON FIRE EXTINGUISHANTS- THE ...  

Science Conference Proceedings (OSTI)

... This activity will be increasingly managed within the framework of the MOD-wide environmental management system now being adopted. ...

2011-10-04T23:59:59.000Z

315

NITROGEN GAS AS A HALON REPLACEMENT ...  

Science Conference Proceedings (OSTI)

... TABLE 4. INERTION CONCENTRATIONS. - m Fuel Inertion Conc., vol.% Butane 40.0 44.0 Propane 42.0 46.2 ... COST AND AVAILABILITY ...

2011-10-20T23:59:59.000Z

316

Materials Sustainability: Digital Resource Center - A Replacement ...  

Science Conference Proceedings (OSTI)

Jul 1, 2008 ... This presentation from the 2003 EPA Conference describes the prior art for magnesium protection and presents the MagShield system with...

317

Can e-learning replace classroom learning?  

Science Conference Proceedings (OSTI)

In an e-learning environment that emphasizes learner-centered activity and system interactivity, remote learners can outperform traditional classroom students.

Dongsong Zhang; J. Leon Zhao; Lina Zhou; Jay F. Nunamaker, Jr.

2004-05-01T23:59:59.000Z

318

INVESTIGATION INTO HALON 1301 REPLACEMENTS: A ...  

Science Conference Proceedings (OSTI)

... acetic acid, potassium salt; KC&,O, The chemical selection focuses on dry chemicals in a solution with water. ... acetic acid, sodium salt; CH3CO$4a ...

2011-10-27T23:59:59.000Z

319

Efficiency Maine - Replacement Heating Equipment Program (Maine...  

Open Energy Info (EERE)

announced its closure November 2011. According to Efficiency Maine, almost 2,600 homeowners participated in the program trading in older, less-efficient space andor water...

320

Sustainable LED Fluorescent Light Replacement Technology  

SciTech Connect

Ilumisys and the National Center for Manufacturing Sciences (NCMS) partnered on a three-year project awarded by the United States (U.S.) Department of Energy (DOE), to quantify the impacts of LED lamps, incandescent lamps and fluorescent benchmark lamps over a product lifecycle i.e. to develop a sustainable design and manufacturing strategy that addresses product manufacturing, use, recycling and disposal scenarios for LED-based lighting. Based on the knowledge gained from extensive product tear-down studies of fluorescent and screw-in lighting products, lifecycle assessment tools, and accelerated lifecycle testing protocols, an interactive Sustainable LED Design Guide has been developed to aid architectural and lighting designers and engineers in making design decisions that consider three important environmental impacts (greenhouse gas emissions, energy use and mercury emission) across all phases of the life of an LED lighting product. Critical information developed for the lifecycle analysis and product feature comparisons is the useful life of the lighting product as well as its performance. The Design Guide is available at www.ncms.org, and was developed based on operational and durability testing of a variety of lighting products including power consumption, light output, and useful life of a lamp in order to allow a more realistic comparison of lamp designs. This report describes the main project tasks, results and innovative features of the lifecycle assessment (LCA)-based design tools, and the key considerations driving the sustainable design of LED lighting systems. The Design Guide incorporates the following three novel features for efficiently evaluating LED lighting features in value-chains: Bill-of-Materials (BOM) Builder Designers may import process data for each component and supply functional data for the product, including power, consumption, lumen output and expected useful life. Environmental Impact Review Designs are comparable across lifecycle phases, subsystems, and environmental impact category, and can be normalized to a userdefined functional unit. Drill-down Review These provide an indepth look at individual lamp designs with the ability to review across subsystem or lifecycle phase.

None

2011-06-30T23:59:59.000Z

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

US ARMY GROUND VEHICLE HALON REPLACEMENT ...  

Science Conference Proceedings (OSTI)

... test fixture has been constructed from a derelict ground vehicle hull ... exposure levels: ion selective electrodes (grab hag sampling), sorbent tubes ...

2011-10-04T23:59:59.000Z

322

Replacing Incandescent Lightbulbs and Ballasts | Department of...  

NLE Websites -- All DOE Office Websites (Extended Search)

as ellipsoidal reflectors (type-ER) in recessed fixtures. Use reflector (R)or parabolic reflector (PAR) CFLs for flood and spotlighting. Some CFL fixtures have built-in...

323

Lanczos's equation to replace Dirac's equation ?  

E-Print Network (OSTI)

Lanczos's quaternionic interpretation of Dirac's equation provides a unified description for all elementary particles of spin 0, 1/2, 1, and 3/2. The Lagrangian formulation given by Einstein and Mayer in 1933 predicts two main classes of solutions. (1) Point like partons which come in two families, quarks and leptons. The correct fractional or integral electric and baryonic charges, and zero mass for the neutrino and the u-quark, are set by eigenvalue equations. The electro-weak interaction of the partons is the same as with the Standard model, with the same two free parameters: e and sin^2 theta. There is no need for a Higgs symmetry breaking mechanism. (2) Extended hadrons for which there is no simple eigenvalue equation for the mass. The strong interaction is essentially non-local. The pion mass and pion-nucleon coupling constant determine to first order the nucleon size, mass and anomalous magnetic moment.

Andre Gsponer; Jean-Pierre Hurni

2001-12-23T23:59:59.000Z

324

Green Replacement for Industrial Applications of Polar ...  

The lower volatility can lead to more energy intensive separation of the solvent; however, this is something that should be considered when moving to this alternative.

325

Green Replacement for Industrial Applications of Vaccine ...  

This alternative eliminates the ... volatility can lead to more energy intensive separation of the solvent; however, this is something that should be

326

IMPACT OF HALON REPLACEMENT ON AIRCRAFT ENGINE ...  

Science Conference Proceedings (OSTI)

... If the extinguisher unit is installed in a location that adversely affects the aircraft's center of gravity (CG), ballast may have to be added elsewhere. ...

2011-11-03T23:59:59.000Z

327

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

41 - 6750 of 28,905 results. 41 - 6750 of 28,905 results. Download CX-005867: Categorical Exclusion Determination 735-A, D-wing, Main Floor ? ARGUS Halon Suppression System Replacement CX(s) Applied: B2.5 Date: 03/09/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005867-categorical-exclusion-determination Download CX-005868: Categorical Exclusion Determination Fire Department Flow Test of N-Area Hydrants CX(s) Applied: B1.3 Date: 03/09/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005868-categorical-exclusion-determination Download CX-002208: Categorical Exclusion Determination Monitor Instruments Mass Spectrometer at Aiken County Technology Laboratory

328

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

01 - 9910 of 26,764 results. 01 - 9910 of 26,764 results. Download CX-005867: Categorical Exclusion Determination 735-A, D-wing, Main Floor ? ARGUS Halon Suppression System Replacement CX(s) Applied: B2.5 Date: 03/09/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005867-categorical-exclusion-determination Download CX-005868: Categorical Exclusion Determination Fire Department Flow Test of N-Area Hydrants CX(s) Applied: B1.3 Date: 03/09/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005868-categorical-exclusion-determination Download CX-005869: Categorical Exclusion Determination Waste Analysis Characterization Methods in the Analytical Development Wet

329

Categorical Exclusion Determinations: South Carolina | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

July 16, 2013 July 16, 2013 CX-010856: Categorical Exclusion Determination Component Development and Testing for Electrolytic Cells CX(s) Applied: B3.6 Date: 07/16/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office July 16, 2013 CX-010855: Categorical Exclusion Determination Development for Hydrogen Storage and Neutron Conversion Materials, Lab 152 CX(s) Applied: B3.6 Date: 07/16/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office July 16, 2013 CX-010858: Categorical Exclusion Determination Demolition of the 745-N Excess Equipment Pad CX(s) Applied: B1.23 Date: 07/16/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office July 16, 2013 CX-010857: Categorical Exclusion Determination Replace 735-A South Header Ductwork Located on D-wing Service Floor

330

Categorical Exclusion Determinations: South Carolina | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

May 14, 2013 May 14, 2013 CX-010493: Categorical Exclusion Determination Determining Distribution Coefficients by Surface-Enhanced Raman Spectroscopy (SERS) CX(s) Applied: B3.6 Date: 05/14/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office May 14, 2013 CX-010492: Categorical Exclusion Determination Permeation Testing Metals, Ceramics, and Polymers CX(s) Applied: B3.6 Date: 05/14/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office May 9, 2013 CX-010498: Categorical Exclusion Determination Crush and Disperse Specimen Preparation Technique CX(s) Applied: B3.6 Date: 05/09/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office May 7, 2013 CX-010499: Categorical Exclusion Determination 735-A, D-Wing, Main Floor - ARGUS Halon Suppression System Replacement

331

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

11 - 26420 of 28,560 results. 11 - 26420 of 28,560 results. Download CX-007673: Categorical Exclusion Determination Edible Oil Deployment for Enhanced Chlorinated Volatile Organic Compounds Attenuation at the M Area Abandoned Process Sewer Line CX(s) Applied: B3.1 Date: 10/25/2011 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-007673-categorical-exclusion-determination Download CX-007674: Categorical Exclusion Determination Replace Degraded Chemical Hood Exhaust Duct in 735-A, D-wing Service Floor CX(s) Applied: B2.3 Date: 10/25/2011 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-007674-categorical-exclusion-determination Download CX-007675: Categorical Exclusion Determination

332

CX-001383: Categorical Exclusion Determination | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

383: Categorical Exclusion Determination 383: Categorical Exclusion Determination CX-001383: Categorical Exclusion Determination Building 212 Electron Microscopy Improvements CX(s) Applied: B2.1 Date: 04/05/2010 Location(s): Illinois Office(s): Science, Argonne Site Office This project will demolish the existing heating, ventilating, and air conditoning (HVAC) systems within the D Wing of Building 212 (Electron Microscopy Area). Included in this demolition are 5-fancoil units and associated duct work, and duct work missing boxes. These items would be replaced by a new low-sound and specifically designed and built 30-ton air handling unit, insulated sound suppressing supply and return ductwork, and all necessary piping, valves, and sound reducing insulation. Silencers and laminar flow registers, controls, air balancing and commissioning are also

333

Categorical Exclusion Determinations: B2.3 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

October 25, 2011 October 25, 2011 CX-007674: Categorical Exclusion Determination Replace Degraded Chemical Hood Exhaust Duct in 735-A, D-wing Service Floor CX(s) Applied: B2.3 Date: 10/25/2011 Location(s): South Carolina Offices(s): Savannah River Operations Office September 13, 2011 CX-006758: Categorical Exclusion Determination Versailles Borough Stray Gas Mitigation - Continuation CX(s) Applied: B2.3, B2.5, B6.1 Date: 09/13/2011 Location(s): Versailles, Pennsylvania Office(s): Fossil Energy, National Energy Technology Laboratory September 1, 2011 CX-007792: Categorical Exclusion Determination Gore Substation Safety Lighting CX(s) Applied: B2.3 Date: 09/01/2011 Location(s): Oklahoma Offices(s): Southwestern Power Administration August 25, 2011 CX-006514: Categorical Exclusion Determination

334

Categorical Exclusion Determinations: South Carolina | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 7, 2011 November 7, 2011 CX-007669: Categorical Exclusion Determination Vegetative Response to Metal Exposure in a Growing Media CX(s) Applied: B3.6 Date: 11/07/2011 Location(s): South Carolina Offices(s): Savannah River Operations Office October 27, 2011 CX-007672: Categorical Exclusion Determination Sampling of Nuclear Fuel Assembly CX(s) Applied: B3.6 Date: 10/27/2011 Location(s): South Carolina Offices(s): Savannah River Operations Office October 25, 2011 CX-007674: Categorical Exclusion Determination Replace Degraded Chemical Hood Exhaust Duct in 735-A, D-wing Service Floor CX(s) Applied: B2.3 Date: 10/25/2011 Location(s): South Carolina Offices(s): Savannah River Operations Office October 25, 2011 CX-007673: Categorical Exclusion Determination Edible Oil Deployment for Enhanced Chlorinated Volatile Organic Compounds

335

CX-002883: Categorical Exclusion Determination | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

883: Categorical Exclusion Determination 883: Categorical Exclusion Determination CX-002883: Categorical Exclusion Determination Procure and Install Analytical Chemistry Instrumentation, 773-A (B&C Wings) CX(s) Applied: B3.1 Date: 06/02/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office Project installs a new Ortec Detector and LYNX Digital Signal Analyzer and restores the pneumatic Rabbit Sample Delivery system in B-003; Replaces Surface Area Analyzer in C-123 with newer model; Upgrades Carbon/Sulfur (C/S) and Nitrogen/Oxygen (N/O) Analyzers in B-137 to newer models; Installs new Inductively Coupled Plasma- Mass Spectrometer (ICP-MS) in C-150 which requires modification to Chemical Hood Exhaust (CHEX) hoods. Replaces Scanning Electron Microscope (SEM) in C-108.

336

Economic and Conservation Evaluation of Capital Renovation Projects: Harlingen Irrigation District Cameron County No. 1 Canal Meters and Telemetry Equipment, Impervious-Lining of Delivery Canals, Pipelines Replacing Delivery Canals, and On-Farm Delivery-Site Meters  

E-Print Network (OSTI)

Initial construction costs and net annual changes in operating and maintenance expenses are identified for the capital renovation project proposed by Harlingen Irrigation District Cameron County No. 1 to the North American Development Bank (NADBank). Both nominal and real, expected economic and financial costs of water and energy savings are identified throughout the anticipated useful lives for each of the four components of the proposed project (i.e., canal meters and telemetry equipment, impervious-lining of delivery canals, 24" pipelines replacing delivery canals, and on-farm delivery-site meters). Sensitivity results for both the cost of water savings and cost of energy savings are presented for several important parameters. Expected cost of water savings and cost of energy savings for each of the four components are aggregated into a composite set of cost measures for the total proposed project. Aggregate cost of water savings is estimated to be $31.37 per ac-ft and energy savings are measured at an aggregate value of $0.0002253 per BTU (i.e., $0.769 per kwh). In addition, expected values are indicated for the Bureau of Reclamations three principal evaluation measures specified in the Public Law 106-576 legislation. The aggregate initial construction cost per ac-ft of water savings measure is $26.87 per ac-ft of water savings. The aggregate initial construction cost per BTU (kwh) of energy savings measure is $0.0001603 per BTU ($0.547 per kwh). The amount of initial construction costs per dollar of total annual economic savings is estimated to be -1.30.

Rister, M. Edward; Lacewell, Ronald D.; Sturdivant, Allen W.; Robinson, John R.C.; Popp, Michael C.; Ellis, John R.

2002-10-01T23:59:59.000Z

337

Economic and Conservation Evaluation of Capital Renovation Projects: Cameron County Irrigation District No. 2 (San Benito) Interconnect Between Canals 39 and 13-A1 and Replacement of Rio Grande Diversion Pumping Plant  

E-Print Network (OSTI)

Initial construction costs and net annual changes in operating and maintenance expenses are identified for the capital renovation project proposed by the Cameron County Irrigation District No. 2 (a.k.a. San Benito) to the North American Development Bank (NADBank) and Bureau of Reclamation. Both nominal and real, expected economic and financial costs of water and energy savings are identified throughout the anticipated useful lives for both components of the proposed project (i.e., a lined interconnect between Canals 39 and 13-A1 and replacement of the Rio Grande diversion pumping plant). Sensitivity results for both the cost of water savings and cost of energy savings are presented for several important parameters. Expected cost of water savings and cost of energy savings for both components are aggregated into a composite set of cost measures for the total proposed project. Aggregate cost of water savings is estimated to be $41.26 per ac-ft and energy savings are measured at an aggregate value of $0.0001586 per BTU (i.e., $0.541 per kwh). In addition, expected values are indicated for the Bureau of Reclamations three principal evaluation measures specified in the United States Public Law 106-576 legislation. The aggregate initial construction cost per ac-ft of water savings measure is $157.07 per ac-ft of water savings. The aggregate initial construction cost per BTU (kwh) of energy savings measure is $0.0001777 per BTU ($0.606 per kwh). The ratio of initial construction costs per dollar of total annual economic savings is estimated to be -3.80.

Rister, M. Edward; Lacewell, Ronald D.; Sturdivant, Allen W.; Robinson, John R.C.; Popp, Michael C.; Ellis, John R.

2003-01-01T23:59:59.000Z

338

Economic and Financial Costs of Saving Water and Energy: Preliminary Analysis for Hidalgo County Irrigation District No. 2 (San Juan) Replacement of Pipeline Units I-7A, I-18, and I-22  

E-Print Network (OSTI)

Initial construction costs and net annual changes in operating and maintenance expenses are identified for a three-component capital renovation project proposed by Hidalgo County Irrigation District No. 2. The proposed project primarily consists of replacing aged mortar-joint pipe in pipeline units I-7A, I-18, and I-22 with new rubber-gasketed, reinforced concrete pipe. Both nominal and real estimates of water and energy savings and expected economic and financial costs of those savings are identified throughout the anticipated useful life for the proposed project. Sensitivity results for the cost of saving water are presented for several important parameters. Annual water and energy savings forthcoming from the total project are estimated, using amortization procedures, to be 485 ac-ft of water per year and 179,486,553 BTUs {52,604 kwh} of energy per year. The calculated economic and financial cost-of-saving water is estimated to be $385.46 per ac-ft. The calculated economic and financial cost-of-saving energy is estimated to be $0.0010735 per BTU {$3.663 per kwh}. In addition, expected real (vs. nominal) values are provided for the U.S. Bureau of Reclamations three principal evaluation measures specified in U.S. Public Law 106-576. The aggregate initial construction cost per ac-ft of water saved measure is $510.92. The aggregate initial construction cost per unit of energy saved measure is $0.0013798 per BTU {$4.708 per kwh}. The aggregate ratio of initial construction costs per dollar of total annual economic savings is estimated to be -2.53.

Sturdivant, Allen W.; Rister, M. Edward; Lacewell, Ronald D.

2007-06-01T23:59:59.000Z

339

CX-010133: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-010133: Categorical Exclusion Determination Establish Digital Density Meter Analytical Capability in 735-A, D-wing CX(s) Applied: B3.6 Date: 03112013...

340

U.S. Department of Energy Categorical Exclusion ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Establish Digital Density Meter Analytical Capability in 735-A, D-wing Savannah River Site AikenAikenSouth Carolina Establish Digital Density meter analytical capability in...

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

61 - 6870 of 28,905 results. 61 - 6870 of 28,905 results. Download CX-004815: Categorical Exclusion Determination Volume Measurement of Solids by Gas Pycnometry CX(s) Applied: B3.6 Date: 12/07/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-004815-categorical-exclusion-determination Download CX-004817: Categorical Exclusion Determination Replace Air Handling Unit Heating, Ventilation, and Air Conditioning (HVAC)-AHU-20984 (HVAC-FAN-E21) with HVAC-AHU-E-1, Building 773-A, Section E Southeast Roof CX(s) Applied: B1.3 Date: 12/07/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-004817-categorical-exclusion-determination Download CX-004818: Categorical Exclusion Determination

342

Categorical Exclusion Determinations: South Carolina | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 15, 2013 March 15, 2013 CX-010130: Categorical Exclusion Determination Mechanical Isolation of Plant Air System at TNX CX(s) Applied: B1.27 Date: 03/15/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office March 15, 2013 CX-010129: Categorical Exclusion Determination 707-C Roof Replacement CX(s) Applied: B1.3 Date: 03/15/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office March 15, 2013 CX-010128: Categorical Exclusion Determination Electrochemistry in Ionic Liquids CX(s) Applied: B3.6 Date: 03/15/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office March 15, 2013 CX-010127: Categorical Exclusion Determination Operations in Laboratory 773-A, B135/139 CX(s) Applied: B3.6 Date: 03/15/2013 Location(s): South Carolina

343

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

601 - 6610 of 28,905 results. 601 - 6610 of 28,905 results. Download CX-006635: Categorical Exclusion Determination Testing of Hydrogen Storage Materials CX(s) Applied: B3.6 Date: 08/03/2011 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-006635-categorical-exclusion-determination Download CX-006630: Categorical Exclusion Determination Modular Caustic Side Solvent Extraction (MCU) Improved Solvent Testing CX(s) Applied: B3.6 Date: 08/02/2011 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-006630-categorical-exclusion-determination Download CX-006632: Categorical Exclusion Determination 773-A, C-001 Roof Replacement Date: 08/02/2011 Location(s): Aiken, South Carolina

344

Categorical Exclusion Determinations: South Carolina | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 7, 2010 December 7, 2010 CX-004818: Categorical Exclusion Determination Operation of the 723-A High Pressure Laboratory Environmental Chamber CX(s) Applied: B3.6 Date: 12/07/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office December 7, 2010 CX-004817: Categorical Exclusion Determination Replace Air Handling Unit Heating, Ventilation, and Air Conditioning (HVAC)-AHU-20984 (HVAC-FAN-E21) with HVAC-AHU-E-1, Building 773-A, Section E Southeast Roof CX(s) Applied: B1.3 Date: 12/07/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office December 7, 2010 CX-004816: Categorical Exclusion Determination Environmental Biotechnology General Laboratory Operations CX(s) Applied: B3.6 Date: 12/07/2010 Location(s): Aiken, South Carolina

345

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

01 - 27410 of 28,904 results. 01 - 27410 of 28,904 results. Download CX-008360: Categorical Exclusion Determination Installation of Stairs and Sampling Station for Storm Water Outfall G-10A CX(s) Applied: B3.1 Date: 04/12/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-008360-categorical-exclusion-determination Download CX-008361: Categorical Exclusion Determination Replace Power Supply poles for Savannah River National Laboratory trailer CX(s) Applied: B2.5 Date: 04/10/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-008361-categorical-exclusion-determination Download CX-008362: Categorical Exclusion Determination Installation of Glovebox in 773-A CX(s) Applied: B3.6

346

Categorical Exclusion Determinations: B1.3 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

August 3, 2011 August 3, 2011 CX-006486: Categorical Exclusion Determination B-Press and Extruder Modification CX(s) Applied: A7, B1.3, B1.15, B1.16, B1.27, B1.31 Date: 08/03/2011 Location(s): Amarillo, Texas Office(s): Pantex Site Office August 3, 2011 CX-006452: Categorical Exclusion Determination Building 4 Mezzanine Renovation CX(s) Applied: B1.3, B2.3 Date: 08/03/2011 Location(s): Morgantown, West Virginia Office(s): Fossil Energy, National Energy Technology Laboratory August 2, 2011 CX-006632: Categorical Exclusion Determination 773-A, C-001 Roof Replacement Date: 08/02/2011 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office July 26, 2011 CX-006624: Categorical Exclusion Determination Pole Inspections For C- Area - By Sub-Contractor (L) CX(s) Applied: B1.3

347

Categorical Exclusion Determinations: B1.3 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 7, 2010 December 7, 2010 CX-004824: Categorical Exclusion Determination Dismantle and Remove Tank 6 Riser 7 for Waste Determination (WD) Sampling CX(s) Applied: B1.3 Date: 12/07/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office December 7, 2010 CX-004821: Categorical Exclusion Determination On-Dock Rail Straddle Portal Test Facility Roller Compacted Concrete Paving Plan CX(s) Applied: B1.3 Date: 12/07/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office December 7, 2010 CX-004817: Categorical Exclusion Determination Replace Air Handling Unit Heating, Ventilation, and Air Conditioning (HVAC)-AHU-20984 (HVAC-FAN-E21) with HVAC-AHU-E-1, Building 773-A, Section E Southeast Roof CX(s) Applied: B1.3 Date: 12/07/2010

348

--No Title--  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

This EEC is for conducting thermal analyses including, Thermagravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Differential Thermal Analysis (DTA), in the 773-A...

349

Work plan, AP-102 mixer pump removal and pump replacement  

DOE Green Energy (OSTI)

The objective of this work plan is to plan the steps and estimate the costs required to remove the failed AP-102 mixer pump, and to plan and estimate the cost of the necessary design and specification work required to order a new, but modified, mixer pump including the pump and pump pit energy absorbing design. The main hardware required for the removal of the mixer is as follows: a flexible receiver and blast shield; a metal container for the pulled mixer pump; and a trailer and strongback to haul and manipulate the container. Additionally: a gamma scanning device will be needed to detect the radioactivity emanating from the mixer as it is pulled from the tank; a water spray system will be required to remove tank waste from the surface of the mixer as it is pulled from the AP-102 tank; and a lifting yoke to lift the mixer from the pump pit (the SY-101 Mixer Lifting Yoke will be used). A ``green house`` will have to be erected over the AP-102 pump pit and an experienced Hoisting and Rigging crew must be assembled and trained in mixer pump removal methods before the actual removal is undertaken.

Jimenez, R.F.

1994-09-01T23:59:59.000Z

350

A thermostat to replace low-temperature slush baths - Springer  

Science Conference Proceedings (OSTI)

Home Contact Us Download PDF (335 KB) ... Other actions. Export citation Register for Journal Updates About This Journal Reprints and Permissions...

351

Development of Functionally Graded Transition Joints to Replace ...  

Science Conference Proceedings (OSTI)

Explosive Bonding of 316L to C18150 CuCrZr Alloy for ITER Applications Failure Mechanisms of Dissimilar Metal Welds During High Temperature Service.

352

Improving power efficiency with compiler-assisted cache replacement  

Science Conference Proceedings (OSTI)

Data cache in embedded systems plays the roles of both speeding up program execution and reducing power consumption. However, a hardware-only cache management scheme usually results in unsatisfactory cache utilization. In several new architectures, cache ... Keywords: Compiler optimization, Intel XScale, cache management, knapsack problem, low power

Hongbo Yang; R. Govindarajan; Guang R. Gao; Ziang Hu

2005-12-01T23:59:59.000Z

353

L Prize Competition Winner: 60W Incandescent Replacement Lamp  

NLE Websites -- All DOE Office Websites (Extended Search)

Prize Partners 14 15 Field Assessments: Retail Platte River Power Authority DTE Energy SMUD 16 Additional Opportunities: GATEWAY Demonstrations of LED Outdoor Lighting Reports...

354

The opportunistic replacement problem: analysis and case studies  

E-Print Network (OSTI)

Jan 22, 2009 ... We show that when maintenance occasions are fixed, the remaining problem can ... Category 2: Applications -- OR and Management Sciences...

355

Magnetic Nanoparticle Capilary Flow as a Replacement for Lateral ...  

Wind Energy; Partners (27) ... The reported method will report both quantitative and qualitative results in a rapid ... Visit the Office of Technology Transfer Website.

356

Dallas-Fort Worth, TX Clean Taxi Replacement Incentive  

Energy.gov (U.S. Department of Energy (DOE))

The North Central Texas Council of Governments has partnered with the U.S. Environmental Protection Agency and the City of Dallas to develop the North Texas Green & Go Clean Taxi Partnership as...

357

Boron-10 Neutron Detectors for Helium-3 Replacement  

NLE Websites -- All DOE Office Websites (Extended Search)

to monitor people and cargos for smuggled nuclear materials and are often incorporated in nuclear power plant design to monitor power levels and ensure safe operations. With the...

358

Seismic Life Safety, Modernization, and Replacement of General...  

NLE Websites -- All DOE Office Websites (Extended Search)

downloading, Volume I has been divided into three parts. The full document is on the last row of this table. Date Issued Document Title Comment Period (if applicable) 12910 PDF...

359

CONSTRUCTION BY REPLACEMENT: A NEW APPROACH TO SIMULATION MODELING  

E-Print Network (OSTI)

detail, it is useful to review the fundamental idea of reusable components in computer science as well With these three fundamental categories, we turned to categorizing the 50 original molecules and cture had some was stored in a systematically organized on-line knowledge base called the "Process Handbook" (see Malone et

360

CodeBender: Remote Software Protection Using Orthogonal Replacement  

Science Conference Proceedings (OSTI)

In a typical client-server scenario, a server provides valuable services to client applications that run remotely on untrusted client computers. Typical examples are video on demand, online games, voice-over-IP communications, and many others. However, ... Keywords: hardware/software protection, development tools, software/software engineering, program transformation, security and protection

Mariano Ceccato; Paolo Tonella

2011-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

L Prize Competition Winner 60W Incandesent Replacement Lamp Update  

NLE Websites -- All DOE Office Websites (Extended Search)

soon. --Senator Jeff Bingaman, D-NM What's the Buzz? - Would You Buy A 60 Light Bulb That Lasts 20 Years? -game-changing technology L Prize Helps Federal Purchasers:...

362

5-Carbon Alcohols for Drop-in Gasoline Replacement - Energy ...  

Low water solubility offers further cost advantages by enabling shipment of the fuel in the existing petroleum pipeline infrastructure. Finally, ...

363

Replacement of Damaged Electrical Insulators on Live Cross-Over ...  

Science Conference Proceedings (OSTI)

Abstract Scope, With amperage creep, the cross-over busbars electrical insulation of this smelter was ... Compact Filter Design for Gas Treatment Centers ... Gas-Solid Flow Applications for Powder Handling in Aluminum Smelters Processes.

364

Drop-in replacement biofuels : meeting the challenge.  

E-Print Network (OSTI)

??This thesis presents a discussion on the challenges that must be met to fulfill the U.S. Navy's strategic imperatives for its energy vision. It provides (more)

Bhargava, Alok (Alok Kishore)

2011-01-01T23:59:59.000Z

365

Load beam unit replaceable inserts for dry coal extrusion pumps  

Science Conference Proceedings (OSTI)

A track assembly for a particulate material extrusion pump according to an exemplary aspect of the present disclosure includes a link assembly with a roller bearing. An insert mounted to a load beam located such that the roller bearing contacts the insert.

Saunders, Timothy; Brady, John D.

2012-11-13T23:59:59.000Z

366

RELIABILITY OF SAMPLING INSPECTION SCHEMES APPLIED TO REPLACEMENT STEAM GENERATORS  

E-Print Network (OSTI)

, the use of tube material showing less sensitivity to stress corrosion cracking as well as improvements

Cizelj, Leon

367

Remarks at the Capability Replacement Laboratory (CRL) Completion...  

National Nuclear Security Administration (NNSA)

peace and security. Two years ago this month, President Obama used his first foreign policy speech, during his first international trip to outline his vision for confronting...

368

The potential commercialization of neuronal replacement therapy using smart polymers  

E-Print Network (OSTI)

NeuroBioChip Device is a programmable, biocompatible, biodegradable, polymer matrix which allows the growth and programming of donor neurons. It creates a microenvironment conducive for neuronal outgrowth and promises a ...

Dutt, Anindita, 1971-

2005-01-01T23:59:59.000Z

369

EPRI Case History Study: High Pressure Feedwater Heater Replacement  

Science Conference Proceedings (OSTI)

U.S. utilities are faced with the need for continuous change in the way plants are operated and maintained. A focus on generation costs sets the stage for innovation in the way fossil plant outages are planned and managed. While nuclear plants have been pioneers in this area, fossil plant managers and support staff are now recognizing ways to extend runs between outages and minimize outage duration. This is being accomplished with aggressive application of condition-based maintenance, and improved outage...

2005-12-16T23:59:59.000Z

370

Performance monitoring and replacement of heat exchanger components and materials  

Science Conference Proceedings (OSTI)

This book contains papers presented at the 1990 International Joint Power Generation Conference. Included are the following articles: A comparison of heat transfer coefficients, Extend heat exchanger and condenser life with metal alloy inserts, Design, service conditions and deaerator cracking in Dutch utility boilers.

Maurer, J.R. (Allegheny Ludlum Steel (US))

1990-01-01T23:59:59.000Z

371

Replacing Critical Rare Earth Materials in High Energy Density ...  

Science Conference Proceedings (OSTI)

... magnet motors (IPM) for hybride and electric vehicles and direct drive wind generators. Current motor designs use rare earth permanent magnets which easily...

372

Using podcasts to replace lecture: Effects on student achievement  

Science Conference Proceedings (OSTI)

This study examined achievement when podcasts were used in place of lecture in the core technology course required for all students seeking teacher licensure at a large research-intensive university in the Southeastern United States. Further, it examined ... Keywords: 21st century skills, Delivery methods, Podcasts, Teacher education, Web 2.0

Blanche W. O'Bannon; Jennifer K. Lubke; Jeffrey L. Beard; Virginia G. Britt

2011-11-01T23:59:59.000Z

373

Progammatic mission transformation - chemistry and metallurgy research replacement (CMRR) project  

Science Conference Proceedings (OSTI)

Nuclear posture and policy objectives are: (1) Preventing nuclear proliferation and nuclear terrorism; (2) Reducing the role of nuclear weapons in US national security strategy; (3) Maintaining strategic deterrence and stability at reduced nuclear force levels; (4) Strengthening regional deterrence and reassuring US allies and partners; and (5) Sustaining a safe, secure, and effective nuclear arsenal.

Gunderson, L Nguyen [Los Alamos National Laboratory; Kornreich, Drew E [Los Alamos National Laboratory; Wong, Amy S [Los Alamos National Laboratory

2011-01-24T23:59:59.000Z

374

Cold Atoms Could Replace Hot Gallium in Focused Ion ...  

Science Conference Proceedings (OSTI)

... The high energies needed to focus gallium for milling tasks end up burying small amounts in the sample, contaminating the material. ...

2011-04-26T23:59:59.000Z

375

Cobalt discovery replaces precious metals as industrial catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

with potential applications in such energy-related technologies such as production of biofuels and reduction of carbon dioxide. November 26, 2012 The artwork depicts the...

376

Construction by Replacement: A new approach to simulation modeling  

E-Print Network (OSTI)

Simulation modeling can be valuable in many areas of management science, but it is often costly, time-consuming, and difficult to do. To reduce these problems, system dynamics researchers have previously developed standard ...

Hines, James

377

Energy Replacement Generation Tax Exemption (Iowa) | Open Energy...  

Open Energy Info (EERE)

(0.0006) per kilowatt-hour (kWh) on various forms of electricity generated within the state. This tax is imposed in lieu of a property tax on generation facilities. Under the...

378

Managing distributed collections: evaluating web page changes, movement, and replacement  

Science Conference Proceedings (OSTI)

Distributed collections of Web materials are common. Bookmark lists, paths, and catalogs such as Yahoo! Directories require human maintenance to keep up to date with changes to the underlying documents. The Walden's Paths Path Manager is a tool to support ... Keywords: change detection, collection management, document location

Zubin Dalal; Suvendu Dash; Pratik Dave; Luis Francisco-Revilla; Richard Furuta; Unmil Karadkar; Frank Shipman

2004-06-01T23:59:59.000Z

379

The How's and Why's of Replacing the Whole Barrel | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Institute estimates that the United States currently spends about 1 billion each day on oil imports. Of that, more than 70% is consumed by the U.S. transportation sector,...

380

Absolute Glovebox Ventilation Filtration System with Unique Filter Replacement Feature  

SciTech Connect

A glovebox ventilation system was designed for a new plutonium-238 processing facility that provided 1) downdraft ventilation, 2) a leak tight seal around the High Efficiency Particulate Air (HEPA) filters, and 3) a method for changing the filters internally without risk of contaminating the laboratory.

Freeman, S. S.; Slusher, W. A.

1975-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Replacing chemicals in recycle mills with mechanical alternatives  

DOE Green Energy (OSTI)

A high-intensity spark fired underwater decomposes a small amount of the water into hydroxyl radicals, which are strong oxidants. These are able to oxidize contaminants such as glue and wood pitch that enter paper recycling mills as a part of the incoming furnish and cost the industry several hundred million dollars. The sparking technique is safe, inexpensive, and is capable of treating large volumes of water, which makes it attractive for mill applications. Several mill trials were run. Sparking caused a decrease in the tack of the deposits in one case. Lower bleach use occurred in two other mills; sparking reduced the degree of ink reattachment to fiber. The payback for either application is attractive. Sparking induced deposition of contaminants in another mill, which is a positive development--if it can be controlled. The technique is also able to degas water and to oxidize odor-causing sulfur compounds. Although one unit has been purchased by a mill, second-order effects caused by the technology needs to be defined further before the technology can be broadly applied.

Institute of Paper Science Technology

2002-07-01T23:59:59.000Z

382

U.S. Department of Energy Categorical Exclusion ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Degraded Chemical Hood Exhaust (CHEX) Duct in 735-A, D-wing Service Floor Savannah River Site AikenAikenSouth Carolina The main chemical hood exhaust (CHEX) duct serving the...

383

U.S. Department of Energy Categorical Exclusion Determination Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Y646 (Y189), Renovation of E-Wing Ventilation, BLDG 773-A Y646 (Y189), Renovation of E-Wing Ventilation, BLDG 773-A Savannah River Site Aiken/Aiken/South Carolina Y646 is the current project underway to address Modification 2 of the original Commercial Modification Scope Document (CMSD). CMSD was originated to modify the E-Wing HVAC System to improve the air flow balance and to improve radiological confinement and contamination control. These modifications are based on the results of an SRTC Computer Model for 773-A which was performed by Systems Engineering. Revision 1 - Added the scope - D&R of the 773-A Greenhouse Shed. Revision 2 - Corrected form to reflect the scope being performed within 200' of a RCRA/ CERCLA waste unit per ECA direction. Revision 3 - Added description and scope for the use of a Temporary Modification for 773-A F-080

384

U.S. Department of Energy Categorical Exclusion Determination Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Add Blanks in Central Hood Exhaust (CHEX) System Ductwork Between FLT-17 and FLT-18 and between FLT-5 and FLT-6 Add Blanks in Central Hood Exhaust (CHEX) System Ductwork Between FLT-17 and FLT-18 and between FLT-5 and FLT-6 Savannah River Site Aiken/Aiken/South Carolina Rev. 1 adds a second location for spacer removal/blank addition- at HEPA filter banks FLT-5 and 6. This activity removes two 1/8 inch thick by roughly 3 feet by 2 feet stainless steel spacers from the 773-A Central Hood Exhaust (CHEX) system in B-005 at two locations. These four plates and their associated gaskets are likely radioactively contaminated. This same activity- replacing spacers with blanks, was done in 2011 between banks 53 and 54 (ref. M-DCF-A-01096 and TC-A-2011-00045) B2.3 - Personnel safety and health equipment Andrew R. Grainger Digitally signed by Andrew R. Grainger

385

U.S. Department of Energy Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Add Blanks in Central Hood Exhaust (CHEX) System Ductwork Between FLT-17 and FLT-18 Add Blanks in Central Hood Exhaust (CHEX) System Ductwork Between FLT-17 and FLT-18 Savannah River Site Aiken/Aiken/South Carolina This activity removes two 1/8 inch thick by roughly 3 feet by 2 feet stainless steel spacers from the 773-A Central Hood Exhaust (CHEX) system. These two plates and their associated gaskets are likely radioactively contaminated. This same activity- replacing spacers with blanks, was done in 2011 between banks 53 and 54 (ref. M-DCF-A-01096 and TC-A-2011-00045) B2.3 - Personnel safety and health equipment Andrew R. Grainger Digitally signed by Andrew R. Grainger DN: cn=Andrew R. Grainger, o=DOE-SR, ou=EQMD, email=drew.grainger@srs.gov, c=US Date: 2012.02.07 17:59:37 -05'00' 02/06/2012 Submit by E-mail TC-A-2012-0005

386

U.S. Department of Energy Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Y646 (Y189), RENOVATION OF E-WING VENTILATION, BLDG 773-A Y646 (Y189), RENOVATION OF E-WING VENTILATION, BLDG 773-A Savannah River Site Aiken/Aiken/South Carolina Y646 is the current project underway to address Modification 2 of the original Commercial Modification Scope Document (CMSD). CMSD was originated to modify the E-Wing HVAC Ventilation System to improve the air flow balance; and to improve radiological confinement and contamination control. These modifications are based on the results of an SRTC Computer Model for 773-A which was performed by Systems Engineering. Revision 3 - Added description and scope for the use of a Temporary Modification for 773-A F-080 exhaust system. B2.1 - Workplace enhancements Andrew R. Grainger Digitally signed by Andrew R. Grainger DN: cn=Andrew R. Grainger, o=DOE-SR, ou=EQMD,

387

--No Title--  

NLE Websites -- All DOE Office Websites (Extended Search)

on Service Elevators in Section A, B, C, and D in Building 773-A. In addition the hydraulic power unit which consist of the tank, pump motor and hydraulic valve will be...

388

U.S. Department of Energy Categorical Exclusion ...  

NLE Websites -- All DOE Office Websites (Extended Search)

Destructive Evaluation of Pu Storage Can Bundles Savannah River Site AikenAikenSouth Carolina The glovebox in 773-A is used for the examination of contaminated materials and for...

389

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Air Handling Unit Heating, Ventilation, and Air Conditioning (HVAC)-AHU-20984 (HVAC-FAN-E21) with HVAC-AHU-E-1, Building 773-A, Section E Southeast Roof CX(s) Applied: B1.3...

390

South Carolina | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Air Handling Unit Heating, Ventilation, and Air Conditioning (HVAC)-AHU-20984 (HVAC-FAN-E21) with HVAC-AHU-E-1, Building 773-A, Section E Southeast Roof CX(s) Applied: B1.3...

391

CX-004817: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Air Handling Unit Heating, Ventilation, and Air Conditioning (HVAC)-AHU-20984 (HVAC-FAN-E21) with HVAC-AHU-E-1, Building 773-A, Section E Southeast Roof CX(s) Applied: B1.3...

392

--No Title--  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of 773-A. HEAT team members from Latent Print, DNA, Photography, Trace Evidence, Document Analysis, and Evidence Control units will perform tasks in all rooms located in this wing....

393

Flux Replacement as a Method to Diagnose Coupled LandAtmosphere Model Feedback  

Science Conference Proceedings (OSTI)

The potential role of the land surface state in improving predictions of seasonal climate is investigated with a coupled landatmosphere climate model. Climate simulations for 18 boreal-summer seasons (198299) have been conducted with specified ...

Paul A. Dirmeyer; Mei Zhao

2004-12-01T23:59:59.000Z

394

Evaluation of Technologies to Complement/Replace Mass Spectrometers in the Tritium Facilities  

DOE Green Energy (OSTI)

The primary goal of this work is to determine the suitability of the Infraran sensor for use in the Palladium Membrane Reactor. This application presents a challenge for the sensor, since the process temperature exceeds its designed operating range. We have demonstrated that large baseline offsets, comparable to the sensor response to the analyte, are obtained if cool air is blown across the sensor. We have also shown that there is a strong environmental component to the noise. However, the current arrangement does not utilize a reference detector. The strong correlation between the CO and H{sub 2}O sensor responses to environmental changes indicate that a reference detector can greatly reduce the environmental sensitivity. In fact, incorporation of a reference detector is essential for the sensor to work in this application. We have also shown that the two sensor responses are adequately independent. Still, there are several small corrections which must to be made to the sensor response to accommodate chemical and physical effects. Interactions between the two analytes will alter the relationship between number density and pressure. Temperature and pressure broadening will alter the relationship between absorbance and number density. The individual effects are small--on the order of a few percent or less--but cumulatively significant. Still, corrections may be made if temperature and total pressure are independently measured and incorporated into a post-analysis routine. Such corrections are easily programmed and automated and do not represent a significant burden for installation. The measurements and simulations described above indicate that with appropriate corrections, the Infraran sensor can approach the 1-1.5% measurement accuracy required for effective PMR process control. It is also worth noting that the Infraran may be suitable for other gas sensing applications, especially those that do not need to be made in a high-temperature environment. Any gas with an infrared absorption (methane, ammonia, etc.) may be detected so long as an appropriate bandpass filter can be manufactured. Note that homonuclear diatomic molecules (hydrogen and its isotopes, nitrogen, oxygen) do not have infrared absorptions. We have shown that the sensor response may be adequately predicted using commercially available software. Measurement of trace concentrations is limited by the broad spectral bandpass, since the total signal includes non-absorbed frequencies. However, cells with longer pathlengths can be designed to address this problem.

Tovo, L. L.; Lascola, R. J.; Spencer, W. A.; McWhorter, C. S.; Zeigler, K. E.

2005-08-30T23:59:59.000Z

395

Case Study 5: Replacement and Capacity Expansion Decisions at an Airplane Engine  

E-Print Network (OSTI)

a designed annual capacity of 1,300,000 compressor blades and 12,000 disks. The 700,000 square foot facility the machining and bu ng handling capacity to 600,000 airfoils per year. As this bottleneck problem remains. With this con guration the spindle/vibratory machinery can be used in a pure spindle mode at no additional cost

Colton, Jonathan S.

396

A fields only version of the Lorentz Force Law: Particles replaced by their fields  

E-Print Network (OSTI)

We show that the Lorentz force law, F^L_1=q_1(E+v_1xB) being the charge on particle 1 interacting with the electromagnetic fields due to all other particles, can be written in a pure field form F^L_1=-\

Philip H. Butler; Niels G. Gresnigt; Martin B. van der Mark; Peter F. Renaud

2012-11-20T23:59:59.000Z

397

Replacement of chlorofluorocarbons (CFCs) at the DOE gaseous diffusion plants: An assessment of global impacts  

SciTech Connect

The US Department of Energy (DOE) formerly operated two gaseous diffusion plants (GDPs) for enriching uranium and maintained a third shutdown GDP. These plants maintain a large inventory of dichlorotetrafluorethane (CFC-114), a cholorofluorocarbon (CFC), as a coolant. The paper evaluates the global impacts of four alternatives to modify GDP coolant system operations for a three-year period beginning in 1996. Interim modification of GDP coolant system operations has the potential to reduce stratospheric ozone depletion from GDP coolant releases while a permanent solution is studied.

Socolof, M.L.; Saylor, R.E.; McCold, L.N.

1994-06-01T23:59:59.000Z

398

Potential Impacts of CF3I as a Replacement for CF3Br in ...  

Science Conference Proceedings (OSTI)

... have used observed temperature distributions and fixed wind circulations ... The effects of zonally averaged winds are included in ... Solomon, S., MJ Mill ...

2011-10-04T23:59:59.000Z

399

Network-Level Reliability-Based Bridge Inspection, Maintenance and Replacement Optimization Model  

E-Print Network (OSTI)

maintenance and repair decisions, the objective of infrastructure managementmaintenance and inspection, led to the development of bridge managementmaintenance and rehabilitation decisions. Experience with infrastructure management

Robelin, Charles-Antoine; Madanat, S M

2006-01-01T23:59:59.000Z

400

Exchangeable sodium accumulation and replacement in Southeast Texas soils under turfgrass  

E-Print Network (OSTI)

Many municipal water supplies in Southeast Texas have a relatively high level of Na+ and low total dissolved solids. Most soils of this area are dominated by smectitic clays that respond to wetting by swelling, especially when wetted with high Na waters of low salinity. This study assessed the degree of Na accumulation in Southeast Texas soils under irrigated turfgrass, tested models predicting Na accumulation, and evaluated response of sodic soil to amendments. The Ap, E, and Bt horizons of 18 turf soils in 10 municipal water districts were studied. Irrigation water sodicity (SARiw) and salinity (ECiw) were strongly correlated with soil sodicity (SARE) and salinity (ECe). The SAR,W was found to be the best single variable to model soil Na accumulation but exchangeable Na also increased as a function of years of irrigation. The multiple regression equation: SARE =-5.16 + 0.53 SARiw + 4.04 In (yr) (R2 = 0.86) best predicted SARE to a depth of 30 cm. This study also compared gypsum, a common amendment for sodic soil reclamation, to langbeinite. A column leaching experiment using sodic water was conducted on a sodic, non-saline Boonville soil (fine, montmorillonitic, thermic Ruptic Vertic Albaqualf) amended with gypsum and langbeinite at rates equivalent to exchangeable Na in soil depths of 15 and 30 cm. The soil water at depths of 7.5, 15 and 22.5 cm and the effluent from each column were collected at intervals of 12 h and analyzed for sodium adsorption ratio (SAR) and soluble bases. Saturated hydraulic conductivity (Ksat) was calculated. At the end of the experiment, soil samples were removed from each column in four depth increments. Significantly less exchangeable Na and lower SAR of the soil waters were found in the lower sections of the soil columns, and Ksat was greater for the amended treatments than for the control.

Najjar, Namir Fouad

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Innovative Approach to Chiller Replacement at Lafayette General Medical Center Located in Lafayette, Louisiana  

E-Print Network (OSTI)

The Lafayette General Medical Center is a 332- bed, comprehensive regional medical facility. The Main Building was original a 7 story structure built in 1965. Prior to 1983, other than expansion work, there not been no work done on the original central plant or HVAC systems. In 1983, utilizing a combination of financing methods including U.S. Department of Energy ("DOE") grants, the Hospital initiated a comprehensive Facility Energy, Operations and Utilization Analysis Program. In that time period, the Main Building increased square footage from 284,000 to 463,000, a 63% increase, with a simultaneous reduction in utility costs from $3.94/SF to $2.26/SF, or a 43% reduction. The culmination of the latest phase of the Program, described in this paper, includes the installation of a "hybrid" central system Since 1983, the Hospital has realized a cumulative savings of $5.6 million in utility costs.

Poche', J. M.; Broussard, J. P.

1998-01-01T23:59:59.000Z

402

Re^Os evidence for replacement of ancient mantle lithosphere beneath the North China craton  

E-Print Network (OSTI)

^Os data for peridotite xenoliths carried in Paleozoic kimberlites and Tertiary alkali basalts confirm, coupled with the presence of cold, refractory mantle xenoliths carried in kimberlite pipes that erupt

Mcdonough, William F.

403

Evaluation of replacement protocols and modifications to TCP to enhance ASC Wide Area Network performance.  

SciTech Connect

Historically, TCP/IP has been the protocol suite used to transfer data throughout the Advanced Simulation and Computing (ASC) community. However, TCP was developed many years ago for an environment very different from the ASC Wide Area Network (WAN) of today. There have been numerous publications that hint of better performance if modifications were made to the TCP algorithms or a different protocol was used to transfer data across a high bandwidth, high delay WAN. Since Sandia National Laboratories wants to maximize the ASC WAN performance to support the Thor's Hammer supercomputer, there is strong interest in evaluating modifications to the TCP protocol and in evaluating alternatives to TCP, such as SCTP, to determine if they provide improved performance. Therefore, the goal of this project is to test, evaluate, compare, and report protocol technologies that enhance the performance of the ASC WAN.

Romero, Randy L. Jr.

2004-09-01T23:59:59.000Z

404

BWRVIP-229: BWR Vessel and Internals Project, Alloy X-750 Replacement Roadmap  

Science Conference Proceedings (OSTI)

Utilities require degradation-resistant, high-strength material for use in performing repairs to boiling water reactors (BWRs) as well as for use in new construction. This report reviews a number of alloys for applicability to BWR service conditions.

2009-12-11T23:59:59.000Z

405

Recovery Act: Hydroelectric Facility Improvement Project - Replacement of Current Mechanical Seal System with Rope Packing System  

SciTech Connect

On January 27, 2010 the City of North Little Rock, Arkansas received notification of the awarding of a Department of Energy (DOE) grant totaling $450,000 in funding from the American Recovery and Reinvestment Act (ARRA) under the Project Title: Recovery Act: Hydroelectric Facility Improvement Project Automated Intake Clearing Equipment and Materials Management. The purpose of the grant was for improvements to be made at the Citys hydroelectric generating facility located on the Arkansas River. Improvements were to be made through the installation of an intake maintenance device (IMD) and the purchase of a large capacity wood grinder. The wood grinder was purchased in order to receive the tree limbs, tree trunks, and other organic debris that collects at the intake of the plant during high flow. The wood grinder eliminates the periodic burning of the waste material that is cleared from the intake and reduces any additional air pollution to the area. The resulting organic mulch has been made available to the public at no charge. Design discussion and planning began immediately and the wood grinder was purchased in July of 2010 and immediately put to work mulching debris that was gathered regularly from the intake of the facility. The mulch is currently available to the public for free. A large majority of the design process was spent in discussion with the Corps of Engineers to obtain approval for drawings, documents, and permits that were required in order to make changes to the structure of the powerhouse. In April of 2011, the Citys Project Engineer, who had overseen the application, resigned and left the Citys employ. A new Systems Mechanical Engineer was hired and tasked with overseeing the project. The transfer of responsibility led to a re-examination of the original assumptions and research upon which the grant proposal was based. At that point, the project went under review and a trip was booked for July 2011 to visit facilities that currently had an IMD installed. This further study of facilities revealed that the implementation of the project as originally described, while proving the benefits described in the original grant application, would likely intensify sand intake. Increased sand intake would lead to an increase in required shutdowns for maintenance and more rapid depreciation of key equipment which would result in a loss of generation capacity. A better solution to the problem, one that continued to meet the criteria for the original grant and ARRA standards, was developed. A supporting day trip was planned to visit other facilities located on the Arkansas River to determine how they were coping with the same strong amounts of sand, silt, and debris. Upon returning from the trip to other Arkansas River facilities it was extremely clear what direction to go in order to most efficiently address the issue of generator capacity and efficiency. Of the plants visited on the Arkansas River, every one of them was running what is called a rope packing shaft sealing system as opposed to mechanical shaft seals, which the facility was running. Rope packing is a time proven sealing method that has been around for centuries. It has proved to perform very well in dirty water situations just like that of the Arkansas River. In April of 2012 a scope change proposal was submitted to the DOE for approval. In August of 2012 the City received word that the change of scope had been approved. Plans were immediately set in motion to begin the conversion from mechanical seals to a packing box at the facility. Contractors arrived on October 1st, 2012 and the project team began unwatering the unit for disassembly. The seal conversion was completed on February 29th, 2013 with start-up of the unit. Further testing and adjusting was done throughout the first two weeks of March.

Stephens, Jessica D.

2013-05-29T23:59:59.000Z

406

Spare-parts replacement and the commercial grade issues at Connecticut Yankee  

Science Conference Proceedings (OSTI)

Connecticut Yankee was designed and built according to code B31.1 of the American National Standards Institute for pressure piping and began commercial operations in 1968, 2 yr prior to 10CFR50 Appendix B of the Code of Federal Regulations. Therefore, at the time of commercial operation, the entire plant, except for several major primary plant components, met the current criteria for commercial grade items (CGIs). When spare parts were needed, 10CFR50 Appendix B and 10CFR21 requirements had to be backfitted onto suppliers who had not agreed to these requirements when supplying the original equipment. The problem of identifying original equipment manufacturers that would or would not accept these additional requirements was compounded at Connecticut Yankee by three related problems that also became apparent at approximately the same time: (1) The accuracy of the material, equipment, parts list (Q-list) was being questioned. (2) The use of existing spare parts bought without additional current quality assurance requirements and the adequacy of the existing inventory to support plant operations were being questioned. (3) The general industry concerns over use of GCIs in safety-related applications needed to be resolved. Connecticut Yankee management recognized the need to address each of these problems. Three specific actions were taken: (1) A Q-list upgrade program was funded. (2) A spare parts bill of materials (BOM) project was funded. (3) Connecticut Yankee's engineering department dedicated several engineers to address procurement issues and specifically to develop a CGI program.

Nichols, E.M.; Scott, D.J.; Maret, D.L.

1989-01-01T23:59:59.000Z

407

[Minor revisionposted 2/28/12 (replaces 11/3/11 edition)] Operating Policy and Procedure  

E-Print Network (OSTI)

of the project is underestimated and actual costs exceed revenue, departments are responsible for the deficit the costs accounted for in the respective sponsored project fund exceed the revenue payments received project deliverables have been met and to ensure all costs incurred for the project have been accounted

Rock, Chris

408

Repair and Replacement Applications Center: Stress Corrosion Cracking in Closed Cooling Water Systems  

Science Conference Proceedings (OSTI)

The results of a recent EPRI project "Stress Corrosion Cracking in PWR and BWR Closed Cooling Water Systems," (EPRI Report 1009721, October 2004) indicated that approximately 10 of 143 light water reactor (LWR) plants surveyed had through-wall leaks in carbon steel piping in their closed cooling water (CCW) systems. The root cause of this leakage was intergranular stress corrosion cracking. Since there has not been extensive non-destructive testing in these systems, it is likely that the incidence rate o...

2006-09-28T23:59:59.000Z

409

Replacing the Whole Barrel To Reduce U.S. Dependance on Oil  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

additives like ethanol and develop technologies that will help us displace diesel, jet fuel, heavy distillates, and a range of other chemicals and products. I am pleased to report...

410

USE OF ALKALINE TREATED CROP RESIDUES AS PARTIAL GRAIN REPLACEMENTS FOR FINISHING CATTLE.  

E-Print Network (OSTI)

??Recently, corn has become expensive and this has led to high feed costs and decreased profitability. High priced corn has allowed for the consideration of (more)

Shreck, Adam L

2013-01-01T23:59:59.000Z

411

Plant-based lipid blends can completely replace menhaden fish oil in female white  

E-Print Network (OSTI)

45 Flax Canola Corn100% Fish Dietary 18:2n-6 (% total FAME) Dietary 18:2n-6 (% total FAME) 33% Squid 66% Squid 100% Squid 0 15 30 45 0 15 30 45 Flax Canola Corn Dietary 18:2n-6 (% total FAME) Dietary 18

412

Replacement of fish meal in sunshine bass (Morone chrysops x Morone  

E-Print Network (OSTI)

proteins ­ Soybean, corn gluten, canola, and cottonseed meals (Kikuchi 1999; Regost et al. 1999; Carter · Palatability ­ Soluble canola protein concentrate · Digestibility · Stress tolerance ­ Increased stress

413

Bayesian Belief Network (BBN)-based advisory system development for steam generator replacement project management  

E-Print Network (OSTI)

The growing need for improved project management technique points to the usefulness of a knowledge-base advisory system to help project managers understand current and future project status and optimize decisions based ...

Kim, Dohyoung, 1970-

2002-01-01T23:59:59.000Z

414

Pressing swing adsorption system using product gas as replacement for purge gas  

SciTech Connect

In a pressure swing adsorption plant for the purification and separation of gases, with several adsorbers, conducting respectively within one cycle the steps of adsorption, expansion or pressure equalization, purging, and pressure buildup, using as the purge gas residual gas released during the expansion of adsorbers, wherein pressure buildup is conducted at least in part with product gas, and when there is a malfunction in an adsorber yielding purge gas, the product gas is employed not only for the pressure buildup but also for purging one or more adsorbers. The amount of purge gas is controlled so that the adsorber or adsorbers, which are in the pressure buildup phase reach the desired adsorption pressure within a previously determined period of time.

Asztalos, S. A.

1984-10-09T23:59:59.000Z

415

Optimization of opportunistic replacement activities: A case study in the aircraft industry  

E-Print Network (OSTI)

that estimates the remaining life and also a case study that indicates that a non-stationary renewal process equipment that needs to be utilized as e#30;ciently as possible to pay back the cost of investment maintenance to enable the minimization of the total expected cost to have a functional aircraft engine

Patriksson, Michael

416

Emerging of massive gauge particles in inhomogeneous local gauge transformations: replacement of Higgs mechanism  

E-Print Network (OSTI)

A generalized theory of gauge transformations is presented on the basis of the covariant Hamiltonian formalism of field theory, for which the covariant canonical field equations are equivalent to the Euler-Lagrange field equations. Similar to the canonical transformation theory of point dynamics, the canonical transformation rules for fields are derived from generating functions. Thus---in contrast to the usual Lagrangian description---the covariant canonical transformation formalism automatically ensures the mappings to preserve the action principle, and hence to be {\\em physical}. On that basis, we work out the theory of inhomogeneous local gauge transformations that generalizes the conventional local SU(N) gauge transformation theory. It is shown that massive gauge bosons naturally emerge in this description, which thus could supersede the Higgs mechanism.

Jrgen Struckmeier

2013-03-26T23:59:59.000Z

417

Cost-Effective Replacement for Iodide in Dye-Sensitized Solar Cells  

Dye-sensitized solar cells (DSSCs) are used to create electrical energy from sunlight. The cell has three components: the cathode, the photoanode, and ...

418

Percutaneous aortic valve replacement in a re-animated postmortem heart  

E-Print Network (OSTI)

transcatheter implantation of heart valve prosthesis for thein apex of post-mortem heart (lower view). B C A Figure 5A.descending aorta in lambs. Eur Heart J. 2002;23:1045-49. 5.

White, Jennifer; Sun, Amy; Killien, Lauren; Evangelista, Dennis

2006-01-01T23:59:59.000Z

419

[Major revisionposted 3/19/13 (replaces 1/25/12 edition)] Operating Policy and Procedure  

E-Print Network (OSTI)

in eligible positions the opportunity to participate in the Optional Retirement Program (ORP) in lieu of participation in the Teacher Retirement System (TRS) of Texas. The ORP is a tax deferred defined contribution Government Code. The plan year for ORP is defined as the tax year as reported on each employee's Form W-2. b

Rock, Chris

420

Replacement of petroleum based hydraulic fluids with a soybean-based alternative  

DOE Green Energy (OSTI)

Despite the best preventative measures, ruptured hoses, spills and leaks occur with use of all hydraulic equipment. Although these releases do not usually produce a RCRA regulated waste, they are often a reportable occurrence. Clean-up and subsequent administrative procedure involves additional costs, labor and work delays. Concerns over these releases, especially related to Sandia National Laboratories (SNL) vehicles hauling waste on public roads prompted Fleet Services (FS) to seek an alternative to the standard petroleum based hydraulic fluid. Since 1996 SNL has participated in a pilot program with the University of Iowa (UNI) and selected vehicle manufacturers, notably John Deere, to field test hydraulic fluid produced from soybean oil in twenty of its vehicles. The vehicles included loaders, graders, sweepers, forklifts and garbage trucks. Research was conducted for several years at UNI to modify and market soybean oils for industrial uses. Soybean oil ranks first in worldwide production of vegetable oils (29%), and represents a tremendous renewable resource. Initial tests with soybean oil showed excellent lubrication and wear protection properties. Lack of oxidative stability and polymerization of the oil were concerns. These concerns were being addressed through genetic alteration, chemical modification and use of various additives, and the improved lubricant is in the field testing stage.

Rose, B.; Rivera, P.

1998-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Stability Characteristics of Deep-Water Replacement in the Strait of Georgia  

Science Conference Proceedings (OSTI)

It has been suggested that low-frequency current fluctuations in the southern Strait of Georgia are the result of baroclinic instability. However, data extracted from cyclesonde and fixed current meter moorings suggest that the conditions for ...

Richard H. Kapsten; Gordon E. Swaters; Richard E. Thomson

1995-10-01T23:59:59.000Z

422

A Prototype Four-Inch Short Hydride (FISH) Bed as a Replacement Tritium Storage Bed  

Science Conference Proceedings (OSTI)

Tritium Storage / Proceedings of the Ninth International Conference on Tritium Science and Technology

J. E. Klein; E. G. Estochen; K. L. Shanahan; L. K. Heung

423

Level sensor replacement/sampling of Tank 241-SY-101 at the Hanford Site  

SciTech Connect

The US Department of Energy (DOE) is responsible for management and storage of waste accumulated from the processing of defense reactor irradiated fuels for plutonium recovery at the Hanford Site. DOE is proposing to remove three level detectors from Tank 241-SY-101 and analyze the waste that is presently encrusted on the detectors. The proposed sampling is less intrusive than core sampling and will provide data regarding characterization of the crust to support future core sampling. The purpose of this environmental assessment (EA) is to provide information about the proposed action such that a decision can be made on whether a Finding of No Significant Impact should be issued or an environmental impact statement should be prepared. Therefore, this EA evaluates the proposed action and the no action alternative, in keeping with requirements of the National Environmental Policy Act of 1969 (NEPA) and regulations of the Council on Environmental Quality, Title 40, Code of Federal Regulations, parts 1500--1508. 6 refs.

Not Available

1990-01-01T23:59:59.000Z

424

Repair and Replacement projects help FM to honor its commitment to  

E-Print Network (OSTI)

space on the East and West Bank of the Twin Cities campus. The University's steam distribution system include: · Steam (www.facm.umn. edu/services/energymgmt.html) The University of Minnesota operates of their electrical distribution system. Services provided within the Administrative Service Unit cost pool

Gulliver, Robert

425

U.S. Nuclear Power Plants: Continued Life or Replacement After 60? (released in AEO2010)  

Reports and Publications (EIA)

Nuclear power plants generate approximately 20 percent of U.S. electricity, and the plants in operation today are often seen as attractive assets in the current environment of uncertainty about future fossil fuel prices, high construction costs for new power plants (particularly nuclear plants), and the potential enactment of GHG regulations. Existing nuclear power plants have low fuel costs and relatively high power output. However, there is uncertainty about how long they will be allowed to continue operating.

Information Center

2010-05-11T23:59:59.000Z

426

Review, reduce, and replace: The three `R's of energy security Larry Hughes  

E-Print Network (OSTI)

of the Arctic National Wildlife Refuge (ANWR) in the eastern part of the Arctic Slope comes a heightened concern

Hughes, Larry

427

Increased Efficiency in SI Engine with Air Replaced by Oxygen in Argon Mixture  

DOE Green Energy (OSTI)

Basic engine thermodynamics predicts that spark ignited engine efficiency is a function of both the compression ratio of the engine and the specific heat ratio of the working fluid. In practice the compression ratio of the engine is often limited due to knock. Both higher specific heat ratio and higher compression ratio lead to higher end gas temperatures and increase the likelihood of knock. In actual engine cycles, heat transfer losses increase at higher compression ratios and limit efficiency even when the knock limit is not reached. In this paper we investigate the role of both the compression ratio and the specific heat ratio on engine efficiency by conducting experiments comparing operation of a single-cylinder variable-compression-ratio engine with both hydrogen-air and hydrogen-oxygen-argon mixtures. For low load operation it is found that the hydrogen-oxygen-argon mixtures result in higher indicated thermal efficiencies. Peak efficiency for the hydrogen-oxygen-argon mixtures is found at compression ratio 5.5 whereas for the hydrogen-air mixture with an equivalence ratio of 0.24 the peak efficiency is found at compression ratio 13. We apply a three-zone model to help explain the effects of specific heat ratio and compression ratio on efficiency. Operation with hydrogen-oxygen-argon mixtures at low loads is more efficient because the lower compression ratio results in a substantially larger portion of the gas to reside in the adiabatic core rather than in the boundary layer and in the crevices, leading to less heat transfer and more complete combustion.

Killingsworth, N J; Rapp, V H; Flowers, D L; Aceves, S M; Chen, J; Dibble, R

2010-01-13T23:59:59.000Z

428

Network-Level Reliability-Based Bridge Inspection, Maintenance and Replacement Optimization Model  

E-Print Network (OSTI)

maintenance and inspection, led to the development of bridge management systemsmaintenance and rehabilitation decisions. Experience with infrastructure management systemsManagement System (PMS) to optimize pavement rehabilitation expenditures has saved over $200 million in maintenance and

Robelin, Charles-Antoine; Madanat, S M

2006-01-01T23:59:59.000Z

429

History-Dependent Optimization of Bridge Maintenance and Replacement Decisions Using Markov Decision Process  

E-Print Network (OSTI)

management systems to assist agencies to make maintenance andmanagement system in order to optimize the allocation of resources for maintenance

Robelin, Charles-Antoine; Madanat, Samer M

2007-01-01T23:59:59.000Z

430

1. Name 10 types of batteries being developed to replace the ...  

Science Conference Proceedings (OSTI)

... Adams Weill Cage Bellini Feldman Beckett Beethoven Massenet Thomas Matthus Chabrier ... Finney David Suchet Ian Holm Douglas L. Hartman 24. ...

2002-04-29T23:59:59.000Z

431

Recovery Act: Hydroelectric Facility Improvement Project - Replacement of Current Mechanical Seal System with Rope Packing System  

DOE Green Energy (OSTI)

Plans were immediately set in motion to begin the conversion from mechanical seals to a packing box at the facility. Contractors arrived on October 1st, 2012 and the project team began unwatering the unit for disassembly. The seal conversion was completed on February 29th, 2013 with start-up of the unit. Further testing and adjusting was done throughout the first two weeks of March.

Stephens, Jessica D.

2013-05-29T23:59:59.000Z

432

Global warming implications of non-fluorocarbon technologies as CFC replacements  

SciTech Connect

Many technologies could be developed for use in place of conventional compression systems for refrigeration and air conditioning. Comparisons of the global warming impacts using TEWI (Total Equivalent Warming Impact) can be used to identify alternatives that have the potential for lower environmental impacts than electric-driven vapor compression systems using HCFCs and HFCs. Some options, such as secondary heat transfer loops in commercial refrigeration systems to reduce refrigerant charge and emission rates, could be useful in reducing the losses of refrigerants to the atmosphere. Use of ammonia instead of a fluorocarbon in a system with a secondary loop offers only a small potential for decreasing TEWI, and this may not warrant the increased complexity and risks of using ammonia in a retail sales environment. A few technologies, such as adsorption heat pumps, have efficiency levels that show reduced TEWI levels compared to conventional and state of the art compression systems, and further development could lead to an even more favorable comparison. Health and safety risks of the alternative technologies and the materials they employ must also be considered.

Fischer, S.K.; Tomlinson, J.J.

1993-12-31T23:59:59.000Z

433

Electrophoretic detection and separation of mutant DNA using replaceable polymer matrices  

DOE Patents (OSTI)

The disclosure relates to a method for resolving double-stranded DNA species differing by at least one base pair. Each of the species is characterized by an iso-melting domain with a unique melting temperature contiguous with a melting domain of higher thermal stability. 18 figs.

Karger, B.L.; Thilly, W.G.; Foret, F.; Khrapko, K.; Koehavong, P.; Cohen, A.S.; Giese, R.W.

1997-05-27T23:59:59.000Z

434

History-Dependent Optimization of Bridge Maintenance and Replacement Decisions Using Markov Decision Process  

E-Print Network (OSTI)

OF INFRASTRUCTURE SYSTEMS ASCE / SEPTEMBER 2007 / 201must be ?led with the ASCE Managing Editor. The manuscriptNo. 3, September 1, 2007. ASCE, ISSN 1076-0342/2007/3-195

Robelin, Charles-Antoine; Madanat, Samer M

2007-01-01T23:59:59.000Z

435

Dynamic Programing based Maintenance and Replacement Optimization for Bridge Decks using History-Dependent Deterioration Models  

E-Print Network (OSTI)

Copyright ASCE 2006 AATT 2006 Downloaded 08 Apr 2008 toRedistribution subject to ASCE license or copyright;www.ascelibrary.org/ Copyright ASCE 2006 AATT 2006 AATT 2006

Robelin, Charles-Antoine; Madanat, S M

2006-01-01T23:59:59.000Z

436

[Minor revisionposted 12/6/12 (replaces 1/14/08 edition)] Operating Policy and Procedure  

E-Print Network (OSTI)

to other departments. b. Insulation/Abatement Shop - The insulation/abatement shop is in the Building their qualities very useful in construction and industry for fireproofing, insulation, structural strengthening of comprehensive asbestos building surveys; (2) ensuring the safe and proper removal of asbestos

Rock, Chris

437

Effects of select fluids on the friction of metal-on-polyethylene joint replacement surfaces  

E-Print Network (OSTI)

Lubricants are important factors in the tribology of total joint arthroplasty (TJA) surfaces, which are primarily comprised of a polished metallic or ceramic component articulating on an Ultra-High Molecular Weight ...

Chang, Timothy C. (Timothy Chan), 1979-

2005-01-01T23:59:59.000Z

438

Quality Assurance Plan for site electrical replacements at substation line item subproject: 69 KV Substation  

Science Conference Proceedings (OSTI)

The 69 KV Substation Project is based on the recognized need to provide a continuous, reliable source of power and to improve the firm capacity of the electrical service to all production facilities at Mound. The project consists of the following major element: 69 KV Substation: (1) Install a 69 KV Substation and associated equipment with two parallel 18 MVA transformers. (2) Install duct bank as required and provide 15 KV feeder cable from new substation to existing Substation 95 for connection to Mound`s existing primary distribution system. (3) Install duct bank for underground routing of the 15 KV feeder cable from Manhole 5C to the existing power house cable pit. (4) Reconfigure existing Dayton Power and Light Co. 15 KV switchgear in P Building. The purpose of this Quality Assurance Plan (QA Plan) is to assure that the objectives of the United States Department of Energy (D.O.E.) and EG&G Mound Applied Technologies, Miamisburg, Ohio (Mound) are met for this non-weapons project relative to health and safety, protection of the environment, reliability and continuity of operations, and documentation of quality efforts. This QA Plan identifies the activities and responsibilities which are necessary in the design, procurement, fabrication, installation, and start up of this project in order to meet these objectives.

Ohler, C.K.

1991-05-21T23:59:59.000Z

439

Cost-Effective Replacement for Iodide in Dye-Sensitized Solar ...  

fits Potentially cheaper than other forms of photovoltaic energy production ... Enables alternative cell configurations

440

Hydronic Heating Retrofits for Low-Rise Multifamily Buildings: Boiler Control Replacement and Monitoring  

SciTech Connect

The ARIES Collaborative, a U.S. Department of Energy Building America research team, partnered with NeighborWorks America affiliate Homeowners' Rehab Inc. of Cambridge, Massachusetts, to implement and study improvements to the central hydronic heating system in one of the nonprofit's housing developments. The heating control systems in the three-building, 42-unit Columbia Cambridge Alliance for Spanish Tenants housing development were upgraded.

Dentz, J.; Henderson, H.; Varshney, K.

2013-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Accurate modeling of cache replacement policies in a Data-Grid.  

E-Print Network (OSTI)

c Computing Cen- ter (NERSC), at Berkeley. We compare thefrom ?le access to an HPSS at NERSC. The JLab workload has athe LRU caching policy. The NERSC workload has very little

Otoo, Ekow J.; Shoshani, Arie

2003-01-01T23:59:59.000Z

442

How Does the Boundary Layer Contribute to Eyewall Replacement Cycles in Axisymmetric Tropical Cyclones?  

Science Conference Proceedings (OSTI)

Three diagnostic models of the axisymmetric tropical cyclone boundary layer, with different levels of approximation, are applied to the problem of tropical cyclones with concentric eyewalls. The outer eyewall is shown to have an inherently ...

Jeffrey D. Kepert

2013-09-01T23:59:59.000Z

443

Gender Equity and Fertility in European Below-Replacement Fertility Countries: Poland and Estonia  

E-Print Network (OSTI)

Much of the recent scholarly attention has been devoted to the low fertility situation experienced by a growing number of developed countries. In this context, the theoretical framework explicitly incorporating the issues of gender in explanations of low fertility has been gaining notable popularity. This dissertation is focused primarily on the application of McDonald's theory of gender equity to the fertility context of two post-communist "low" and "very low" fertility countries, namely Poland and Estonia. Additionally, it tests the relative importance of gender equity at the societal level and the level of the family, contrasts the results of using different operationalizations of gender equity in the family, and compares the effects of gender equity on male and female fertility. I estimate two sex-specific models for Poland and two-sex specific models for Estonia, which respectively use three and two independent variables capturing gender equity in different institutions as well as in the family. All the models use intended fertility as the dependent variable operationalized as either the intention to have the second or higher order birth or the number of additional children intended. The main findings of this dissertation support the gendered explanation of low fertility in Poland and Estonia. More specifically, they indicate that gender equity in the family significantly increases fertility intentions of Polish men and women and Estonian women but not men. However, in none of the models there is evidence that gender equity in institutions outside the family matters to fertility. All in all, the findings support the gendered approach to fertility. The results of my dissertation indicate that it is important to pay attention to how we measure gender equity. I observe some variation in the findings depending on how stringent definition of equity is used. Finally, my research suggests that the importance of gender equity for women's fertility might be more universal but it is also not completely irrelevant to the fertility of men. I conclude this dissertation with a discussion of the implications of my findings and the potential for future development of research in this area.

Iwinska-Nowak, Anna Malgorzata

2011-12-01T23:59:59.000Z

444

How does the boundary layer contribute to eyewall replacement cycles in axisymmetric tropical cyclones?  

Science Conference Proceedings (OSTI)

Three diagnostic models of the axisymmetric tropical cyclone boundary layer, with different levels of approximation, are applied to the problem of tropical cyclones with concentric eyewalls. The outer eyewall is shown to have an inherently ...

Jeffrey D. Kepert

445

Gundrilling Oil Evaluation to Find a Replacement for 50-50  

SciTech Connect

In 2006 the gundrilling oil used at Honeywell FM&T (Federal Manufacturing and Technology) was known as 50-50. This name was selected because the oil is a mixture of two machining oils, Milpro 634 and Pennex N47. Unfortunately, Honeywell FM&T was notified that one component, Pennex N47, would be discontinued by the manufacturer. At this point the Honeywell FM&T team decided to select a single oil to eliminate mixing and procurement of two products. In addition, the team also wanted to select new oil with lower viscosity than the 50-50 mixture. Lower (than 50-50) viscosity oil was recommended by Nagel the manufacturer of the new TBT gundrilling machines. To this end Honeywell FM&T evaluated seven cutting oils in order to select a substitute that would achieve acceptable gundrilling results. This work resulted in the selection of Castrol Ilocut 334 based on cutting performance and human factors. The Castrol oil can easily achieve up to 8 holes per drill at a feed rate 30% greater than that achieved by the 50-50 oil. Once design agency approval is received, this oil will be installed as the drilling oil for all FM&T stems. This oil will also be used for other reservoir machining operations where appropriate.

Karl Arnold

2008-04-30T23:59:59.000Z

446

[Major revisionposted 9/10/12 (replaces 1/16/08 edition)] Operating Policy and Procedure  

E-Print Network (OSTI)

, Livestock and Meat Operations, Thornton Beef Cattle/Feed, and Texas Tech Center at Amarillo ­ Pantex

Rock, Chris

447

Hydronic Heating Retrofits for Low-Rise Multifamily Buildings - Phase 1: Boiler Control Replacement and Monitoring  

SciTech Connect

The ARIES Collaborative, a Department of Energy Building America research team, partnered with NeighborWorks America affiliate Homeowners' Rehab Inc. (HRI) of Cambridge, MA to implement and study improvements to the heating system in one of the non-profit's housing developments. The heating control systems in the 42-unit Columbia CAST housing development were upgraded in an effort projected to reduce heating costs by 15 to 25 percent.

Dentz, J.; Henderson, H.

2012-04-01T23:59:59.000Z

448

Life cycle cost analysis for replacement of fluorescent light fixtures containing polychlorinated biphenyls  

SciTech Connect

This report describes the remedial action to achieve compliance with 29 CFR 1910 Occupational Safety and Health Administration (OSHA) requirements of fluorescent light fixtures containing PCBs at K-25 site. This remedial action is called the Remediation Plan for Fluorescent Light Fixtures Containing PCBs at the K-25 Site (The Plan). The Plan specifically discusses (1) conditions of non-compliance, (2) alternative solutions, (3) recommended solution, (4) remediation plan costs, (5) corrective action, (6) disposal of PCB waste, (7) training, and (8) plan conclusions. The results from inspections by Energy Systems personnel in 2 buildings at K-25 site and statistical extension of this data to 91 selected buildings at the K-25 site indicates that there are approximately 28,000 fluorescent light fixtures containing 47,036 ballasts. Approximately 38,531 contain PCBs and 2,799 of the 38,531 ballasts are leaking PCBs. Review of reportable occurrences at K-25 for the 12 month period of September 1990 through August 1991 shows that Energy Systems personnel reported 69 ballasts leaking PCBs. Each leaking ballast is in non-compliance with 29 CFR 1910 - Table Z-1-A. The age of the K-25 facilities indicate a continued and potential increase in ballasts leaking PCBs. This report considers 4 alternative solutions for dealing with the ballasts leaking PCBs. The advantages and disadvantages of each alternative solution are discussed and ranked using cost of remediation, reduction of health risks, and compliance with OSHA as criteria.

1992-04-29T23:59:59.000Z

449

Note: On July 7, 2011, this document replaced the original meeting...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

out that it is the long term that one has to be concerned about. Koonin agreed. Natural gas is not the best answer forever. Richter said that that is in the policy area, not the...

450

Unprocessed rice husk ash as a partial replacement of cement for low-cost concrete  

E-Print Network (OSTI)

Cement is a very valuable commodity as it can be used to construct structurally sound buildings and infrastructure. However, in many developing countries cement is expensive due to the unavailability of local resources to ...

Brown, Dorothy Kamilah

2012-01-01T23:59:59.000Z

451

Is it Cost-Effective to Replace Old Eddy-Current Drives?  

Science Conference Proceedings (OSTI)

This is one in a series of tip sheets to help manufacturers optimize their industrial motor and motor-driven systems.

Not Available

2008-07-01T23:59:59.000Z

452

Water/Wastewater Engineering Report (High Efficiency Pump/Motor Replacement - M2 Model)  

E-Print Network (OSTI)

Pumping water or wastewater is the largest use of electricity for a municipal water supply or wastewater treatment plant. Increasing the overall efficiency of the pumping system can achieve significant energy savings. Overall pump system efficiency depends on the efficiency of the motor, the pump, and the design of the piping layout. The model developed in this document focuses on improvements mostly to the pumping system rather than a municipal piping system. Furthermore, this model primarily addresses electric motor-driven pumps, and does not include the pumps driven with gasoline or diesel engines.

Liu, Z.; Brumbelow, K.; Haberl, J. S.

2006-10-30T23:59:59.000Z

453

Driving Demand for Home Energy Improvements: Motivating residential customers to invest in comprehensive upgrades that eliminate energy waste, avoid high utility bills, and spur the economy  

E-Print Network (OSTI)

water heater replacement, air conditioner replacement, solarwater heater replacement, air conditioner replacement, solar

Fuller, Merrian C.

2011-01-01T23:59:59.000Z

454

 

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Y646 is the current project underway to address Modification 2 of the original Commercial Modification Scope Document (CMSD). CMSD was Y646 is the current project underway to address Modification 2 of the original Commercial Modification Scope Document (CMSD). CMSD was originated to modify the E-Wing HVAC Ventilation System to improve the air flow balance; and to improve radiological confinement and contamination control. These modifications are based on the results of an SRTC Computer Model for 773-A which was performed by Systems Engineering. Revision 1 - Added the scope - D& R of the 773-A Greenhouse Shed. Revsion 2 - Corrected form to reflect the scope being performed within 200' of a RCRA/CERCLA waste unit per ECA direction. Y646 (Y189), RENOVATION OF E-WING VENTILATION, BLDG 773-A Savannah River Site Aiken South Carolina TC-A-2011-0061, Rev.0 Sep 28, 2011 Andrew R. Grainger

455

CX-008358: Categorical Exclusion Determination | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8: Categorical Exclusion Determination 8: Categorical Exclusion Determination CX-008358: Categorical Exclusion Determination Renovation of E-Wing Ventilation, Building 773-A CX(s) Applied: B2.1 Date: 04/18/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office Y646 is the current project underway to address Modification 2 of the original Commercial Modification Scope Document (CMSD). CMSD was originated to modify the E-Wing heating, ventilation and air conditioning (HVAC) Ventilation System to improve the air flow balance; and to improve radiological confinement and contamination control. These modifications are based on the results of an SRTC Computer Model for 773-A which was performed by Systems Engineering. Revision 3 - Added description and scope for the use of a Temporary Modification for 773-A F-080 exhaust system.

456

U.S. Department of Energy Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Operations in Laboratory 773-A, B135/139 Operations in Laboratory 773-A, B135/139 Savannah River Site Aiken/Aiken/South Carolina 773-A, B135/139 is a multi-purpose laboratory equipped with instrumentation to process and/or analyze liquid, solid, and gaseous samples utilizing glovebox and/or hood containment systems. The proposed work will involve SRNL support of SRS (as well as other DOE complex facilities) technical activities related to chemical and physical characterization of both radioactive and non-radioactive samples associated with nuclear materials research, production, transportation, storage, and/or disposition. B3.6 - Small-scale research and development, laboratory operations, and pilot projects Andrew R. Grainger Digitally signed by Andrew R. Grainger DN: cn=Andrew R. Grainger, o=DOE-SR, ou=EQMD,

457

U.S. Department of Energy Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Y646 (Y189), Renovation of E-Wing Ventilation, Building 773-A Y646 (Y189), Renovation of E-Wing Ventilation, Building 773-A Savannah River Site Aiken/Aiken/South Carolina Y646 is the current project underway to address Modification 2 of the original Commercial Modification Scope Document (CMSD). CMSD was originated to modify the E-Wing HVAC System to improve the air flow balance and improve radiological confinement and contamination control. These modifications are based on the results of an SRTC Computer Model for 773-A which was performed by Systems Engineering. Revision 4 adds missing details from the project design package (e.g., D&R of EP 5916 fan and associated HEPA filtration). B2.1 - Workplace enhancements Andrew R. Grainger Digitally signed by Andrew R. Grainger DN: cn=Andrew R. Grainger, o=DOE-SR, ou=EQMD,

458

 

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

773-A, B135/139 is a multi-purpose laboratory equipped with instrumentation to process and/or analyze liquid, solid, and gaseous samples utilizing 773-A, B135/139 is a multi-purpose laboratory equipped with instrumentation to process and/or analyze liquid, solid, and gaseous samples utilizing glovebox and/or hood containment systems. The proposed work will involve SRNL support of SRS (as well as other DOE complex facilities) technical activities related to chemical and physical characterization of both radioactive and non-radioactive samples associated with nuclear materials research, production, transportation, storage, and/or disposition. Operations in Laboratory 773-A, B135/139 Savannah River Site Aiken South Carolina TC-A-2011-00022, Rev.0 Feb 28, 2011 Andrew R. Grainger Digitally signed by Andrew R. Grainger DN: cn=Andrew R. Grainger, o=DOE-SR, ou=EQMD, email=drew.grainger@srs.gov, c=US

459

Replace Pressure-Reducing Valves with Backpressure Turbogenerators: Office of Industrial Technologies (OIT) Steam Tip Fact Sheet No. 20  

SciTech Connect

Many industrial facilities produce steam at a higher pressure than is demanded by process requirements. Steam passes through pressure-reducing valves (PRVs, also known as letdown valves) at various locations in the steam distribution system to let down or reduce its pressure. A non-condensing or backpressure steam turbine can perform the same pressure-reducing function as a PRV, while converting steam energy into electrical energy.

2002-01-01T23:59:59.000Z

460

Fluid mixing during deposition of bedded-replacement (BR) deposits in the Illinois-Kentucky fluorspar district  

SciTech Connect

The Illinois-Kentucky(IK) district is unusual by comparison to other Mississippi Valley-type (MVT) districts in the central US in that it contains fluorspar mineralization primarily, with subordinate quantities of base metals. This mineralization occurs as vein, BR, and breccia-hosted deposits. A clearly discernible paragenetic sequence of color banded fluorite sulfides, carbonates, and sulfates is present in BR deposits in three sub-districts: Cave-in-Rock, Harris Creek, and Carrsville. Homogenization temperatures (T[sub b]) and salinities of fluids in fluorite show that BR deposits formed from at least three fluids, a lower temperature-higher salinity connate fluid (F1) and a higher temperature-lower salinity connate fluid (F2) that mixed at the site of deposition. These fluids were followed by a lower temperature-lower salinity meteoric dominated fluid (F3). The involvement of two distinct regional fluids: a lower temperature, more-saline fluid, and a warmer, less-saline fluid, during mineralization of MVT deposits has previously been recognized for Pb-Zn deposits in southeast Missouri (Shelton et al., 1992), and east Tennessee (Zimmerman and Kesler, 1981; Taylor et al. 1983).

Spry, P.G.; Fuhrmann, G.D. (Iowa State Univ., Ames, IA (United States). Dept. of Geological Atmospheric Sciences)

1993-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "replace 773-a d-wing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Problems in the initial teaching of programming using Java: the case for replacing J2SE with J2ME  

Science Conference Proceedings (OSTI)

In their analysis of the use of Java as a first teaching language, the ACM Java Task Force (JTF) identified a number of issues with the Java language and APIs which caused significant pedagogic problems. The focus of their work, and hence of their characterisation ... Keywords: introductory programming, programming languages

Ian Utting

2006-06-01T23:59:59.000Z

462

Nuclear Maintenance Applications Center: Recommended Practice for Evaluating Interchangeability for National Electric Manufacturing Association Frame Motor Replacement  

Science Conference Proceedings (OSTI)

The National Electric Manufacturers Association (NEMA) has a standardized system for designating electric motors. The NEMA system uses a frame size number and letter designation that describes the mounting dimensions, including foot hole mounting pattern, shaft diameter, shaft height, and other details; however, all design characteristicssuch as overall length, height, conduit box extension, and so onmust be evaluated to ensure proper form, fit, and function. The T-frame motor might be the most highly st...

2010-09-30T23:59:59.000Z

463

SUBJECT: Amendment No. 0003 to Request for Proposal Solicitation Package for Design and Construction of REPLACE FAMILY HOUSING, PHASE 3,  

E-Print Network (OSTI)

1. The specifications and drawings for subject project are hereby modified as follows (revise all specification indices, attachment lists, and drawing indices accordingly). a. Specifications. (Descriptive Changes.) (1) Section 01000, Part 4, Page 4-17, paragraph 4.4.17, line 4, delete Any wood must be pressure treated and substitute the following: Any exposed wood members used on porches, patios, decks, etc. shall be pressured treated and coated with a clear U.V. protectant and sealer such as Sherwin Williams Cuprinol, UV SunBlock Deck and Wood Seal or approved equal. (2) Section 01000, Part 6, Page 6-8, a. Paragraph 6.5.3, at the end of this paragraph add the following sentence: Silt fences may be constructed of filter fabric or straw bales. b. Delete Paragraph 6.5.4 in its entirety. (3) Section 01000, Part 7: a. Page 7-2, paragraph 7.2, to the end of this paragraph add the following sentence: The Design-Build Contractor shall avoid the removal of existing trees, as much as possible.

Ellsworth Afb; Sd. Daca--r

2003-01-01T23:59:59.000Z

464

Plant Process Computer Replacement to Support Distributed Process Control: Joint STPNOC-EPRI Distributed Plant Process Computer Syst em Project  

Science Conference Proceedings (OSTI)

Concerns exist that nuclear power plant process computer systems are becoming obsolete and do not have the infrastructure to support new processes such as digital process control upgrades. To address these concerns, a distributed plant process computer system was designed and implemented at the South Texas Project Nuclear Operating Company Units 1 and 2. Implementing this new system and its associated plant networks, if done correctly, will facilitate future control and information system upgrades that c...

2001-11-16T23:59:59.000Z

465

PB-LRU: a self-tuning power aware storage cache replacement algorithm for conserving disk energy  

E-Print Network (OSTI)

Energy consumption is an important concern at data centers, where storage systems consume a significant fraction of the total energy. A recent study proposed power-aware storage cache management to provide more opportunities for the underlying disk power management scheme to save energy. However, the on-line algorithm proposed in that study requires cumbersome parameter tuning for each workload and is therefore difficult to apply to real systems. This paper presents a new power-aware on-line algorithm called PB-LRU (Partition-Based LRU) that requires little parameter tuning. Our results with both real system and synthetic workloads show that PB-LRU without any parameter tuning provides similar or even better performance and energy savings than the previous power-aware algorithm with the best parameter setting for each workload.

Qingbo Zhu; Asim Shankar; Yuanyuan Zhou

2004-01-01T23:59:59.000Z

466

Replacement solvent identification for the laundry and decontamination drycleaning system (LADDs). Final report, October 1991-March 1992  

SciTech Connect

A comprehensive industry search was carried out for the U.S. Army Natick Research, Development and Engineering Center (Natick) to identify potential solvent alternatives for use in present prototypes and future versions of Natick Laundry and Decontamination Drycleaning System (LADDS). The present LADDS prototype used 1,1,2-trichloro- 1,2,2-trifluoroethane, a chlorofluorocarbon compound known as CFC-113, as the drycleaning solvent. However, CFC-113 has been identified as a ozone-depleting compound and its production and use are scheduled for phaseout under U.S. and international regulations to protect the stratospheric ozone layer. Consequently, Natick needs to identify alternative solvents available for use in the LADDS as well as to understand the engineering design changes that may be necessary in order to use the types of solvents that will be available for future LADDS.

Goydan, R.; Cheney, J.H.; Massucco, A.A.

1992-10-01T23:59:59.000Z

467

Phlogopite and Quartz Lamellae in Diamond-bearing Diopside from Marbles of the Kokchetav Massif Kazakhstan: Exsolution or Replacement Reaction  

Science Conference Proceedings (OSTI)

Exsolution lamellae of pyroxene in garnet (grt), coesite in titanite and omphacite from UHPM terranes are widely accepted as products of decompression. However, interpretation of oriented lamellae of phyllosilicates, framework silicates and oxides as a product of decompression of pyroxene is very often under debate. Results are presented here of FIB-TEM, FEG-EMP and synchrotron-assisted infrared (IR) spectroscopy studies of phlogopite (Phlog) and phlogopite + quartz (Qtz) lamellae in diamond-bearing clinopyroxene (Cpx) from ultra-high pressure (UHP) marble. These techniques allowed collection of three-dimensional information from the grain boundaries of both the single (phlogopite), two-phase lamellae (phlogopite + quartz), and fluid inclusions inside of diamond included in K-rich Cpx and understanding their relationships and mechanisms of formation. The Cpx grains contain in their cores lamellae-I, which are represented by topotactically oriented extremely thin lamellae of phlogopite (that generally are two units cell wide but locally can be seen to be somewhat broader) and microdiamond. The core composition is: (Ca{sub 0.94}K{sub 0.04}Na{sub 0.02})(Al{sub 0.06}Fe{sub 0.08}Mg{sub 0.88})(Si{sub 1.98}Al{sub 0.02})O{sub 6.00}. Fluid inclusions rich in K and Si are recognized in the core of the Cpx, having no visible connections to the lamellae-I. Lamellar-II inclusions consist of micron-size single laths of phlogopite and lens-like quartz or slightly elongated phlogopite + quartz intergrowths; all are situated in the rim zone of the Cpx. The composition of the rim is (Ca{sub 0.95}Fe{sub 0.03}Na{sub 0.02})(Al{sub 0.05}Fe{sub 0.05}Mg{sub 0.90})Si{sub 2}O{sub 6}, and the rim contains more Ca, Mg than the core, with no K there. Such chemical tests support our microstructural observations and conclusion that the phlogopite lamellae-I are exsolved from the K-rich Cpx-precursor during decompression. It is assumed that Cpx-precursor was also enriched in H{sub 2}O, because diamond included in the core of this Cpx contains fluid inclusions. The synchrotron IR spectra of such diamond record the presence of OH{sup -} stretching and H{sub 2}O bending motion regions. Lamellar-II inclusions are interpreted as forming partly because of modification of the lamellae-i in the presence of fluid enriched in K, Fe and Si during deformation of the host diopside; the latter is probably related to the shallower stage of exhumation of the UHP marble. This study emphasizes that in each case to understand the mechanism of lamellar inclusion formation more detailed studies are needed combining both compositional, structural and three-dimensional textural features of lamellar inclusions and their host.

L Dobrzhinetskaya; R Wirth; D Rhede; Z Liu; H Green

2011-12-31T23:59:59.000Z

468

Replacement of lead-loaded glovebox glove with attenuation medium that are not RCRA-hazardous metals  

SciTech Connect

Programmatic operations at the Los Alamos National Laboratory Plutonium Facility (TA-55) involve working with various amounts of plutonium and other highly toxic, alpha-emitting materials. The spread of radiological contamination on surfaces, airborne contamination, and excursions of contaminants into the operator's breathing zone are prevented through the use of a variety of gloveboxes (the glovebox, coupled with an adequate negative pressure gradient, provides primary confinement). Radiation shielding is commonly used to protect the glovebox worker from unintentional direct and secondary radiation exposure, while working with plutonium-238 and plutonium-239. In these environments, low-energy photons, i.e., those less than 250 keY, are encountered. Shielding glove box gloves are traditionally composed of lead-based materials, but these are now considered hazardous waste. This has prompted the development of new, nonhazardous- shielding gJovebox gloves. No studies, however, have investigated the effectiveness of these new glovebox gloves. We examined both leaded and nonhazardous- shielding glovebox gloves and compared their attenuation effectiveness over the energy range of interest at TA-55. All measurements are referenced to lead sheets, allowing direct comparisons to the common industry standard of 0.1 mm lead equivalent material. The attenuation properties of both types of glovebox gloves vary with energy, making it difficult for manufacturers to claim lead equivalency across the entire energy range used at TA-55. The positions of materials' photon energy absorption edges, which are particularly important to improved attenuation performance, depending upon the choice of radiation energy range, are discussed. This effort contributes to the Los Alamos National Laboratory Continuous Improvement Program by improving the efficiency, cost effectiveness, and formality of glovebox operations.

Cournoyer, Michael E [Los Alamos National Laboratory; George, Gerald L [Los Alamos National Laboratory; Dodge, Robert L [Los Alamos National Laboratory; Chunglo, Steve [CANBERRA INDUSTRIES

2010-01-01T23:59:59.000Z

469

Analysis of the Social, Economic, and Environmental Effects of Replacing Petroleum-Based Fuels with Biodiesel Fuels.  

E-Print Network (OSTI)

??Purpose of the Study: Biofuels are a category of alternative fuels derived from organic matter. Biodiesel, a lipid oil-based biofuel, is produced from oilseed crops. (more)

Johnson, Shirley J.

2008-01-01T23:59:59.000Z

470

Effects of replacing fish oil with vegetable oils in feed for rainbow trout (Oncorhynchus mykiss) and Arctic charr (Salvelinus alpinus).  

E-Print Network (OSTI)

??As global capture of fish has stagnated and fish consumption is increasing due to a growing human population, the demand can only be met by (more)

Pettersson, Andreas

2010-01-01T23:59:59.000Z

471

SELECTION OF CORE DESIGN NO. 1 FOR TYPE 5 REPLACEMENT CORES IN SM-1 AND SM- 1A  

SciTech Connect

Nuclear and thermal analyses were performed to determine the characteristics of the Type 5 core in the SM-1 and SM-1A reactor plants as a function of geometry and composition. The following nuclear properties were investigated: core energy release, maximum midlife reactivity, average fuel burnup fraction, B-10 reactivity coefficient, and power distribution. Thermal parameter surveys determined the effects of channel thickness and power distribution upon the DNBR, nominal and hot channel thermal performance, and fuel plate thermal stress. From the nuclear and thermal analyses, a Type 5 core reference design was selected with fuel plates of 70-mil plate thick ness, 7-mil clad thickness, and 38 wt % UO/sub 2/ in the matrix, having initial core loading o4 108 Kg U/syup 235 and 260 gm B/sup 10/. (auth)

Davidson, S.L.; Paluszkiewicz, S.

1962-07-01T23:59:59.000Z

472

Design and prototype of a partial window replacement to improve the energy efficiency of 90-year-old MIT buildings  

E-Print Network (OSTI)

The existing windows of the 90-year-old buildings on the main MIT campus are not energy efficient and compromise comfort levels. The single panes of glass allow too much heat transfer and solar heat gain. In addition, the ...

Chen, YunJa

2007-01-01T23:59:59.000Z

473

Production Test IP-358-AC: Replacement of carbon dioxide with nitrogen as a constituent of the K reactor atmosphere  

SciTech Connect

Compensation for the positive long-term reactivity transient associated with Hanford reactor may be accomplished in two ways: The addition of a poisonous material (rods, splines, etc.) to the reactor, or cooling the moderator by changing the gas composition. The objective of this study is to investigate the reactivity and temperature effects and the associated operating problems if any, resulting from the use of nitrogen instead of carbon dioxide as a constituent of the reactor atmosphere.

Bailey, G.F.; Benoliel, R.W.

1960-10-03T23:59:59.000Z

474

Adiposity, hormone replacement therapy use and breast cancer risk by age and hormone receptor status: a large prospective cohort study  

E-Print Network (OSTI)

,26, Malin Sund27, Per Lenner28, Bas Bueno-de-Mesquita29,30, Carla H van Gils31, Petra HM Peeters31,32, Sanda Krum-Hansen33, Inger Torhild Gram33, Eiliv Lund33, Kay-Tee Khaw34, Nick Wareham35, Naomi E Allen36, Timothy J Key36, Isabelle Romieu37, Sabina...

Ritte, Rebecca; Lukanova, Annekatrin; Berrino, Franco; Dossus, Laure; Tjnneland, Anne; Olsen, Anja; Overvad, Thure F; Overvad, Kim; Clavel-Chapelon, Franoise; Fournier, Agns; Fagherazzi, Guy; Rohrmann, Sabine; Teucher, Birgit; Boeing, Heiner; Aleksandrova, Krasimira; Trichopoulou, Antonia; Lagiou, Pagona; Trichopoulos, Dimitrios; Palli, Domenico; Sieri, Sabina; Panico, Salvatore; Tumino, Rosario; Vineis, Paolo; Quirs, Jos R; Buckland, Genevieve; Snchez, Maria-Jos; Amiano, Pilar; Chirlaque, Mara-Dolores; Ardanaz, Eva; Sund, Malin; Lenner, Per; Bueno-de-Mesquita, Bas; van Gils, Carla H; Peeters, Petra H M; Krum-Hansen, Sanda; Gram, Inger T; Lund, Eiliv; Khaw, Kay-Tee; Wareham, Nick; Allen, Naomi E; Key, Timothy J; Romieu, Isabelle; Rinaldi, Sabina; Siddiq, Afshan; Cox, David; Riboli, Elio; Kaaks, Rudolf

2012-05-14T23:59:59.000Z

475

Accumulation and replacement of exchangeable sodium in soils of Southeast Texas under turfgrass and its effect on soil infiltration rate  

E-Print Network (OSTI)

Many municipal water supplies in Southeast Texas have a relatively high level of Ne and low total dissolved solids. Smectitic clays which respond to wetting by swelling, especially when wetted with high Na waters of low salinity are the major clays in soils of this area. This study assessed the degree of Na accumulation on cation exchange sites as affected by gypsum treatments in soils that support turfgrass (bermudagrass) and the response of soil infiltration rate to different rates of gypsum amendment by using rainfall simulation. A field experiment was conducted on a sodic, non-saline Boonville soil (fine, montmorillonitic, thennic Ruptic Vertic Albaqualf) amended with gypsum at rates equivalent to 5 0%, I 00% and 200% of the exchangeable Na in the soil to a depth of 15 cm. Application of gypsum resulted in similar infiltration rates (IR) which were lower than the untreated plots suggesting a significant difference between treated and untreated soils 9 wk after application. However, at 36 wk after application, treated and untreated soils had similar IR with no statistical difference between treatments. Soils of the study area varied somewhat in textural class, but generally had more than 20 % clay within the 0-IO cm depth. Clay content in the 0-10 cm depth was not correlated with IR at the 20-min measurement. These results suggest the channels developed by roots may enable water to enter the soil in spite of clay content and degree of sodic character. The gypsum treatments statistically affected the levels of extractable Ca and Na in some plots and some depths. Treated plots had higher extractable Ca than untreated plots for the 01 0 cm depth for all sites, but treatment rates did not show a significant difference for each site in the same depth. Levels of extractable Na were statistically lower for treated plots than untreated ones for the 0-I 0 cm depth at all sites. For all sites gypsum application did not have significant effects on levels of extractable Mg and K at all depths and times. Even though the pH of the soils tended to decrease with application of gypsum, untreated soils also showed a decrease in pH over the course of the study and pH was not statistically significant.

Aydemir, Salih

1996-01-01T23:59:59.000Z

476

REPLACEMENT OF FISH MEAL WITH ETHANOL YEAST IN THE DIETS OF SUNSHINE BASS: EFFECTS ON PRODUCTION PERFORMANCE AND  

E-Print Network (OSTI)

of petroleum. Bioethanol and biodiesel are two kinds of biofuel. Biomass resources can be converted be developed with cheap waste, such as dairy manure, to produce bioethanol (Liao et al., 2008; Predojevic. Conversion rate of sugar was calculated by the following formula: Conversion rate ð%? ¼ ½S ? 0:9=ðm ? c? ?

477

Efficient Organic Excitonic Solar Cells with Carbon Nanotubes Replacing In2O3:Sn as the Transparent Electrode (Presentation)  

DOE Green Energy (OSTI)

The conclusions of this report are that: (1) organic solar cells with efficiencies of up to 1.43% conversion efficiency that use no ITO and no PEDOT:PSS, are demonstrated; (2) a cell without ITO, but with PEDOT:PSS gave 2.6% conversion efficiency; (3) due to porous nature of SWCNT substrates, optimization of the active layer is essential; and (4) SWCNT electrodes bring one step closer the goal of a fully printable, organic solar cell.

van de Lagemaat, J.; Barnes, T.; Rumbles, G.; Shaheen, S.; Coutts, T. J.; Weeks, C.; Glatkowski, P.; Levitsky, I.; Peltola, J.

2006-05-01T23:59:59.000Z