Powered by Deep Web Technologies
Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Rapid road repair vehicle  

DOE Patents (OSTI)

Disclosed is a rapid road repair vehicle capable of moving over a surface to be repaired at near normal posted traffic speeds to scan for and find at the high rate of speed, imperfections in the pavement surface, prepare the surface imperfection for repair by air pressure and vacuum cleaning, applying a correct amount of the correct patching material to effect the repair, smooth the resulting repaired surface, and catalog the location and quality of the repairs for maintenance records of the road surface. The rapid road repair vehicle can repair surface imperfections at lower cost, improved quality, at a higher rate of speed than was not heretofor possible, with significantly reduced exposure to safety and health hazards associated with this kind of road repair activities in the past. 2 figs.

Mara, L.M.

1998-05-05T23:59:59.000Z

2

Two-dimensional warranty repair strategy based on minimal and complete repairs  

Science Conference Proceedings (OSTI)

For repairable products, the warrantor has options in choosing the degree of repair applied to an item that has failed within the warranty period. We focus on a particular warranty repair strategy, related to the degree of the warranty repair, for non-renewing, ... Keywords: Expected warranty servicing costs, Warranty, Warranty repair strategy

S. Chukova; M. R. Johnston

2006-12-01T23:59:59.000Z

3

Fan Repair Guideline  

Science Conference Proceedings (OSTI)

The successful repair of a fan component is affected by a number of different factors. These include correctly assessing the root cause of failure, determining the best repair option, implementation of proper repair procedures, and compliance with applicable codes and standards. However, in many situations the proper solution is not clearly evident. The purpose of this document is to provide guidance in the area of induced draft / forced draft fan repair. Specifically, this document deals with the repair...

2002-08-15T23:59:59.000Z

4

Repairing structurally complex data  

Science Conference Proceedings (OSTI)

We present a novel algorithm for repairing structurally complex data. Given an assertion that represents desired structural integrity constraints and a structure that violates them, the algorithm performs repair actions that mutate the given structure ...

Sarfraz Khurshid; Iván García; Yuk Lai Suen

2005-08-01T23:59:59.000Z

5

INTERNAL REPAIR OF PIPELINES  

Science Conference Proceedings (OSTI)

The two broad categories of fiber-reinforced composite liner repair and deposited weld metal repair technologies were reviewed and evaluated for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Principal conclusions from a survey of natural gas transmission industry pipeline operators can be summarized in terms of the following performance requirements for internal repair: (1) Use of internal repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway crossings. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) The most common size range for 80% to 90% of operators surveyed is 508 mm (20 in.) to 762 mm (30 in.), with 95% using 558.8 mm (22 in.) pipe. Evaluation trials were conducted on pipe sections with simulated corrosion damage repaired with glass fiber-reinforced composite liners, carbon fiber-reinforced composite liners, and weld deposition. Additional un-repaired pipe sections were evaluated in the virgin condition and with simulated damage. Hydrostatic failure pressures for pipe sections repaired with glass fiber-reinforced composite liner were only marginally greater than that of pipe sections without liners, indicating that this type of liner is only marginally effective at restoring the pressure containing capabilities of pipelines. Failure pressures for larger diameter pipe repaired with a semi-circular patch of carbon fiber-reinforced composite lines were also marginally greater than that of a pipe section with un-repaired simulated damage without a liner. These results indicate that fiber reinforced composite liners have the potential to increase the burst pressure of pipe sections with external damage Carbon fiber based liners are viewed as more promising than glass fiber based liners because of the potential for more closely matching the mechanical properties of steel. Pipe repaired with weld deposition failed at pressures lower than that of un-repaired pipe in both the virgin and damaged conditions, indicating that this repair technology is less effective at restoring the pressure containing capability of pipe than a carbon fiber-reinforced liner repair. Physical testing indicates that carbon fiber-reinforced liner repair is the most promising technology evaluated to-date. In lieu of a field installation on an abandoned pipeline, a preliminary nondestructive testing protocol is being developed to determine the success or failure of the fiber-reinforced liner pipeline repairs. Optimization and validation activities for carbon-fiber repair methods are ongoing.

Bill Bruce; Nancy Porter; George Ritter; Matt Boring; Mark Lozev; Ian Harris; Bill Mohr; Dennis Harwig; Robin Gordon; Chris Neary; Mike Sullivan

2005-07-20T23:59:59.000Z

6

INTERNAL REPAIR OF PIPELINES  

Science Conference Proceedings (OSTI)

The two broad categories of fiber-reinforced composite liner repair and deposited weld metal repair technologies were reviewed and evaluated for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Principal conclusions from a survey of natural gas transmission industry pipeline operators can be summarized in terms of the following performance requirements for internal repair: (1) Use of internal repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway crossings. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) The most common size range for 80% to 90% of operators surveyed is 508 mm (20 in.) to 762 mm (30 in.), with 95% using 558.8 mm (22 in.) pipe. Evaluation trials were conducted on pipe sections with simulated corrosion damage repaired with glass fiber-reinforced composite liners, carbon fiber-reinforced composite liners, and weld deposition. Additional un-repaired pipe sections were evaluated in the virgin condition and with simulated damage. Hydrostatic failure pressures for pipe sections repaired with glass fiber-reinforced composite liner were only marginally greater than that of pipe sections without liners, indicating that this type of liner is only marginally effective at restoring the pressure containing capabilities of pipelines. Failure pressures for larger diameter pipe repaired with a semi-circular patch of carbon fiber-reinforced composite lines were also marginally greater than that of a pipe section with un-repaired simulated damage without a liner. These results indicate that fiber reinforced composite liners have the potential to increase the burst pressure of pipe sections with external damage Carbon fiber based liners are viewed as more promising than glass fiber based liners because of the potential for more closely matching the mechanical properties of steel. Pipe repaired with weld deposition failed at pressures lower than that of un-repaired pipe in both the virgin and damaged conditions, indicating that this repair technology is less effective at restoring the pressure containing capability of pipe than a carbon fiber-reinforced liner repair. Physical testing indicates that carbon fiber-reinforced liner repair is the most promising technology evaluated to-date. The first round of optimization and validation activities for carbon-fiber repairs are complete. Development of a comprehensive test plan for this process is recommended for use in the field trial portion of this program.

Robin Gordon; Bill Bruce; Ian Harris; Dennis Harwig; George Ritter; Bill Mohr; Matt Boring; Nancy Porter; Mike Sullivan; Chris Neary

2004-12-31T23:59:59.000Z

7

INTERNAL REPAIR OF PIPELINES  

Science Conference Proceedings (OSTI)

The two broad categories of fiber-reinforced composite liner repair and deposited weld metal repair technologies were reviewed and evaluated for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Principal conclusions from a survey of natural gas transmission industry pipeline operators can be summarized in terms of the following performance requirements for internal repair: (1) Use of internal repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) The most common size range for 80% to 90% of operators surveyed is 508 mm (20 in.) to 762 mm (30 in.), with 95% using 558.8 mm (22 in.) pipe. Evaluation trials were conducted on pipe sections with simulated corrosion damage repaired with glass fiber-reinforced composite liners, carbon fiber-reinforced composite liners, and weld deposition. Additional un-repaired pipe sections were evaluated in the virgin condition and with simulated damage. Hydrostatic failure pressures for pipe sections repaired with glass fiber-reinforced composite liner were only marginally greater than that of pipe sections without liners, indicating that this type of liner is only marginally effective at restoring the pressure containing capabilities of pipelines. Failure pressures for larger diameter pipe repaired with a semi-circular patch of carbon fiber-reinforced composite lines were also marginally greater than that of a pipe section with un-repaired simulated damage without a liner. These results indicate that fiber reinforced composite liners have the potential to increase the burst pressure of pipe sections with external damage Carbon fiber based liners are viewed as more promising than glass fiber based liners because of the potential for more closely matching the mechanical properties of steel. Pipe repaired with weld deposition failed at pressures lower than that of un-repaired pipe in both the virgin and damaged conditions, indicating that this repair technology is less effective at restoring the pressure containing capability of pipe than a carbon fiber-reinforced liner repair. Physical testing indicates that carbon fiber-reinforced liner repair is the most promising technology evaluated to-date. Development of a comprehensive test plan for this process is recommended for use in the field trial portion of this program.

Robin Gordon; Bill Bruce; Ian Harris; Dennis Harwig; George Ritter; Bill Mohr; Matt Boring; Nancy Porter; Mike Sullivan; Chris Neary

2004-08-17T23:59:59.000Z

8

Welding and Repair Technology Center: Overlay Handbook  

Science Conference Proceedings (OSTI)

The discovery of primary water stress corrosion cracking (PWSCC) in pressurized water reactor (PWR) vessel heads and components has led to the use of corrosion-resistant high-nickel welding alloys for repair and mitigation activities. To date, more than 30 PWR units have applied weld overlays to pressurizer welds with detected indications or have applied them as a mitigation method. Although the application of weld overlays appears to be a viable solution to managing this difficult issue, the utility ind...

2012-06-29T23:59:59.000Z

9

LASER ENGINEERED NET SHAPING FOR REPAIR AND HYDROGEN COMPATIBILITY  

DOE Green Energy (OSTI)

A method to repair mismatched or damaged components using Laser Engineered Net Shaping{sup R} (LENS) technology to apply material was investigated for its feasibility for components exposed to hydrogen. The mechanical properties of LENS bulk materials were also tested for hydrogen compatibility. The LENS process was used to repair simulated and actual mismachined components. These sample components were hydrogen charged and burst tested in the as-received, as-damaged, and as-repaired conditions. The testing showed that there was no apparent additional deficiency associated with hydrogen charging compared to the repair technique. The repair techniques resulted in some components meeting the requirements while others did not. Additional procedure/process development is required prior to recommending production use of LENS.

Korinko, P.; Adams, T.

2011-08-05T23:59:59.000Z

10

Welding and Repair Technology Center: Repair Welding Handbook  

Science Conference Proceedings (OSTI)

During the life of a power plant, it often becomes necessary to perform weld repairs of various materials in order to continue safe operation. Much work has been completed in this area to assist utilities with choosing appropriate repair techniques based on the materials involved and the damage mechanism that makes the repair necessary. This report captures in one resource a variety of repair methods that have been proven to be effective.

2012-05-14T23:59:59.000Z

11

Repairs of Deaerators  

Science Conference Proceedings (OSTI)

This report provides a brief background of deaerator operation, including types of deaerators. Materials of construction are reviewed along with inspection, failure mechanisms, and repair methods. Some general information is provided to calculate minimum wall to see if deaerators are suitable for continued operation with defects in place.

2004-06-29T23:59:59.000Z

12

Geothermal Well Maintenance and Repair in Cerro Prieto  

DOE Green Energy (OSTI)

When the first well is drilled at a geothermal field, procedures for the cleaning, repair, and control of wells should be established. This aspect will be increasingly important as more wells are drilled. Equipment, tools and techniques need to be improved to achieve economic and safe results. Different systems have been developed and applied in maintenance of wells, in problems of casing incrustations, repairs, plugging, and well control. These systems should be improved, even though they have been reasonably satisfactory to date.

Aguirre, B. D.; Blanco, F. V.

1981-01-01T23:59:59.000Z

13

Applied Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Science Applied Science Correlation of predicted and measured iron oxidation states in mixed iron oxides H. D. Rosenfeld and W. L. Holstein Development of a quantitative measurement of a diesel spray core using synchrotron x-rays C.F. Powell, Y. Yue, S. Gupta, A. McPherson, R. Poola, and J. Wang Localized phase transformations by x-ray-induced heating R.A. Rosenberg, Q. Ma, W. Farrell, E.D. Crozier, G.J. Soerensen, R.A. Gordon, and D.-T. Jiang Resonant x-ray scattering at the Se edge in ferroelectric liquid crystal materials L. Matkin, H. Gleeson, R. Pindak, P. Mach, C. Huang, G. Srajer, and J. Pollmann Synchrotron-radiation-induced anisotropic wet etching of GaAs Q. Ma, D.C. Mancini, and R.A. Rosenberg Synchrotron-radiation-induced, selective-area deposition of gold on

14

CX-003909: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-003909: Categorical Exclusion Determination Emergency Levee, Bank, and Drainage Repairs CX(s) Applied: B2.5 Date: 09162010 Location(s): Craighead...

15

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Download CX-003909: Categorical Exclusion Determination Emergency Levee, Bank, and Drainage Repairs CX(s) Applied: B2.5 Date: 09162010 Location(s): Craighead...

16

CX-000870: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-000870: Categorical Exclusion Determination West Hackberry Air ConditioningHeating Repairs CX(s) Applied: B1.3 Date: 02052010 Location(s): West...

17

CX-004105: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-004105: Categorical Exclusion Determination High Resolution Three-Dimensional Laser Imaging for Inspection, Maintenance, Repair and Operations CX(s) Applied: B3.6 Date:...

18

CX-004100: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-004100: Categorical Exclusion Determination High Resolution Three-Dimensional Laser Imaging for Inspection, Maintenance, Repair and Operations CX(s) Applied: B3.6 Date:...

19

CX-009331: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-009331: Categorical Exclusion Determination High Resolution 3D Laser Imaging for Inspection, Maintenance, Repair and Operations Phase II CX(s) Applied:...

20

CX-007956: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-007956: Categorical Exclusion Determination High Resolution 3-Dimensional Laser Imaging for Inspection, Maintenance, Repair, and Operations CX(s) Applied: B3.6 Date:...

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

CX-009354: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-009354: Categorical Exclusion Determination High Resolution 3D Laser Imaging for Inspection, Maintenance, Repair and Operations - Phase II CX(s) Applied:...

22

CX-008913: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination CX-008913: Categorical Exclusion Determination High Resolution 3D Laser Imaging for Inspection, Maintenance, Repair and Operations - Phase II CX(s) Applied:...

23

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ical-exclusion-determination Download CX-007021: Categorical Exclusion Determination Subsidence Monitor Repair CX(s) Applied: B1.3 Date: 09092011 Location(s): Aiken, South...

24

South Carolina | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Laboratory September 9, 2011 CX-007021: Categorical Exclusion Determination Subsidence Monitor Repair CX(s) Applied: B1.3 Date: 09092011 Location(s): Aiken, South...

25

CX-007021: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination CX-007021: Categorical Exclusion Determination Subsidence Monitor Repair CX(s) Applied: B1.3 Date: 09092011 Location(s): Aiken, South...

26

CX-004894: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination CX-004894: Categorical Exclusion Determination Peacock Substation Washed Out Area Repair CX(s) Applied: B1.3 Date: 11122009 Location(s): Mohave...

27

CX-010656: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Stormwater Drainage Repair CX(s) Applied: B1.3 Date: 06/18/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office

28

Industrial motor repair in the United States  

Science Conference Proceedings (OSTI)

This report characterizes the motor repair industry in the United States; summarizes current motor repair and testing practice; and identifies barriers to energy motor repair practice and recommends strategies for overcoming those barriers.

Schueler, V.; Leistner, P.; Douglass, J.

1994-09-01T23:59:59.000Z

29

Welding and Repair Technology Center: Rolled Plate Repair Guide  

Science Conference Proceedings (OSTI)

This report is intended to enlighten and assist power plant engineers in the application of welded rolled plate repairs in both nuclear and balance-of-plant piping systems. This report introduces the engineer to post-construction standards in non-nuclear industries that use these types of repair, often on a widespread basis. Related requirements in those standards are explained in order to assist the engineer in planning and designing balance-of-plant repairs using welded rolled plates in various applica...

2011-12-23T23:59:59.000Z

30

Inspect and Repair Steam Traps  

SciTech Connect

This revised ITP tip sheet on inspecting and repairing steam traps provide how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

Not Available

2006-01-01T23:59:59.000Z

31

Protein Bridges DNA Base and Nucleotide Excision Repair Pathways  

NLE Websites -- All DOE Office Websites (Extended Search)

Protein Bridges DNA Base and Nucleotide Excision Repair Pathways Print Protein Bridges DNA Base and Nucleotide Excision Repair Pathways Print Alkyltransferase proteins (AGT) protect cells from the biological effects of DNA damage caused by the addition of alkyl groups (alkylation). Alkyltransferase-like proteins (ATLs) can do the same, but they lack the reactive cysteine residue that allows the alkyltransferase function, and the mechanism for cell protection has remained unknown. To address this mystery, a British-American team lead by researchers at the Scripps Research Institute recently applied a combination of x-ray structural, biochemical, and genetic studies to ATLs in the yeast Schizosaccharomyces pombe without and with damaged DNA. By showing how a process called non-enzymatic nucleotide flipping activates ATL-initiated DNA repair, their results may improve our understanding of genomic integrity and responses to DNA damage relevant to pathogens and cancer development.

32

RECORD OF CATEGORICAL EXCLUSION DETERMINATION Hygiene Substation Access Road Repairs  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Hygiene Substation Access Road Repairs Hygiene Substation Access Road Repairs A. Brief Description of Proposal: Western Area Power Administration proposes to repair the access road/driveway into the Hygiene Substation. There is a low spot in the middle of the driveway that impedes maneuvering oflarge maintenance equipment in and out of the yard. Western plans to fill the low spot with road base and crumbled concrete fill. The Hygiene Substation is located in Boulder County, approximately 2 miles northwest of Longmont, CO (T3N, R69W, Sec 18). All proposed construction will occur within the existing, disturbed substation access road/driveway. B. Number and Title of tile Categorical Exclusion Being Applied: (See text in 10 CFR 1021, Subpart D.) BI.3 Routine maintenance activities and custodial services for buildings, structures,

33

Protein Bridges DNA Base and Nucleotide Excision Repair Pathways  

NLE Websites -- All DOE Office Websites (Extended Search)

Protein Bridges DNA Base and Nucleotide Excision Repair Pathways Print Protein Bridges DNA Base and Nucleotide Excision Repair Pathways Print Alkyltransferase proteins (AGT) protect cells from the biological effects of DNA damage caused by the addition of alkyl groups (alkylation). Alkyltransferase-like proteins (ATLs) can do the same, but they lack the reactive cysteine residue that allows the alkyltransferase function, and the mechanism for cell protection has remained unknown. To address this mystery, a British-American team lead by researchers at the Scripps Research Institute recently applied a combination of x-ray structural, biochemical, and genetic studies to ATLs in the yeast Schizosaccharomyces pombe without and with damaged DNA. By showing how a process called non-enzymatic nucleotide flipping activates ATL-initiated DNA repair, their results may improve our understanding of genomic integrity and responses to DNA damage relevant to pathogens and cancer development.

34

Protein Bridges DNA Base and Nucleotide Excision Repair Pathways  

NLE Websites -- All DOE Office Websites (Extended Search)

Protein Bridges DNA Base and Nucleotide Excision Repair Pathways Print Protein Bridges DNA Base and Nucleotide Excision Repair Pathways Print Alkyltransferase proteins (AGT) protect cells from the biological effects of DNA damage caused by the addition of alkyl groups (alkylation). Alkyltransferase-like proteins (ATLs) can do the same, but they lack the reactive cysteine residue that allows the alkyltransferase function, and the mechanism for cell protection has remained unknown. To address this mystery, a British-American team lead by researchers at the Scripps Research Institute recently applied a combination of x-ray structural, biochemical, and genetic studies to ATLs in the yeast Schizosaccharomyces pombe without and with damaged DNA. By showing how a process called non-enzymatic nucleotide flipping activates ATL-initiated DNA repair, their results may improve our understanding of genomic integrity and responses to DNA damage relevant to pathogens and cancer development.

35

Protein Bridges DNA Base and Nucleotide Excision Repair Pathways  

NLE Websites -- All DOE Office Websites (Extended Search)

Protein Bridges DNA Base and Protein Bridges DNA Base and Nucleotide Excision Repair Pathways Protein Bridges DNA Base and Nucleotide Excision Repair Pathways Print Wednesday, 28 October 2009 00:00 Alkyltransferase proteins (AGT) protect cells from the biological effects of DNA damage caused by the addition of alkyl groups (alkylation). Alkyltransferase-like proteins (ATLs) can do the same, but they lack the reactive cysteine residue that allows the alkyltransferase function, and the mechanism for cell protection has remained unknown. To address this mystery, a British-American team lead by researchers at the Scripps Research Institute recently applied a combination of x-ray structural, biochemical, and genetic studies to ATLs in the yeast Schizosaccharomyces pombe without and with damaged DNA. By showing how a process called non-enzymatic nucleotide flipping activates ATL-initiated DNA repair, their results may improve our understanding of genomic integrity and responses to DNA damage relevant to pathogens and cancer development.

36

Parsing speech repair without specialized grammar symbols  

Science Conference Proceedings (OSTI)

This paper describes a parsing model for speech with repairs that makes a clear separation between linguistically meaningful symbols in the grammar and operations specific to speech repair in the operation of the parser. This system builds a model of ...

Tim Miller; Luan Nguyen; William Schuler

2009-08-01T23:59:59.000Z

37

Gas Turbine Component Repair Shop Capabilities  

Science Conference Proceedings (OSTI)

Aftermarket repair services for gas turbine OM has been undergoing continual transformation beginning with the emergence of independent shops in the 1980s. The original equipment manufacturers (OEMs) in the late 1990s began to aggressively pursue repair services. Gas turbine hot section component repair/replacement coupled with inspection/overhaul technical support has come to be offered as long-term service agreements (LTSAs). These agreements often extend from 6 to 18 years. The repair business continu...

2011-12-16T23:59:59.000Z

38

Safety, Capacity, Maintenance and Major Repairs (SCMMR) ...  

Science Conference Proceedings (OSTI)

... repairing and replacing aging mechanical and electrical ... and replacing or upgrading site utility systems; ... will avoid costly infrastructure failures such ...

2010-10-05T23:59:59.000Z

39

Safety, Capacity, Maintenance, and Major Repair  

Science Conference Proceedings (OSTI)

... Continue repairing or replacing aging utility systems, exhaust and air ... Continue improvements to site infrastructure, including roads, loading docks ...

2010-10-05T23:59:59.000Z

40

Localized Hardfacing Repair Techniques, RRAP45  

Science Conference Proceedings (OSTI)

Hardfacing overlays provide a hard, corrosive-resistant wear surface for critical valve, pump, and other component materials susceptible to one or more of the various wear mechanisms. As a result of being hard, these materials are also difficult to deposit and even more difficult to repair. When faced with a repair, owners either replace the hardfaced component or go through a time-consuming and difficult repair task. This report presents repair practices utilized by hardfacing alloy manufacturers, valve...

1997-12-19T23:59:59.000Z

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Advances in Hydroelectric Turbine Manufacturing and Repair  

Science Conference Proceedings (OSTI)

About this Symposium. Meeting, Materials Science & Technology 2013. Symposium, Advances in Hydroelectric Turbine Manufacturing and Repair. Sponsorship ...

42

Applied Quantum Information Science  

Science Conference Proceedings (OSTI)

Applied Quantum Information Science. Summary: Theory is being developed and used to devise methods for preserving ...

2012-05-30T23:59:59.000Z

43

Gas Turbine Repair Guidelines: GE 9FA  

Science Conference Proceedings (OSTI)

For more than a decade, the Electric Power Research Institute (EPRI) has been developing gas turbine hot section component repair and coating guidelines to assist utilities in the refurbishment of these critical and expensive parts. Utilities, generators, and repair vendors have used these guidelines to perform repairs on blades, turbine vanes, and combustion hardware. Guidelines now exist for a variety of conventional and advanced General Electric, Siemens/Westinghouse, Alstom, and Mitsubishi heavy ...

2012-12-12T23:59:59.000Z

44

Gas Turbine Repair Guidelines: Alstom GT26  

Science Conference Proceedings (OSTI)

For more than a decade, the Electric Power Research Institute (EPRI) has been developing gas turbine hot section component repair and coating guidelines to assist utilities and power generators in the refurbishment of these critical and expensive parts. Utilities, generators, and repair vendors have used these guidelines to perform repairs on turbine blades, vanes, and combustion hardware. The guidelines in this volume address the specific features of the Alstom GT26 gas turbine.

2011-11-03T23:59:59.000Z

45

Gas Turbine Repair Guidelines: GE 7FA  

Science Conference Proceedings (OSTI)

For more than a decade, the Electric Power Research Institute (EPRI) has been developing gas turbine hot section component repair and coating guidelines to assist utilities in the refurbishment of these critical and expensive parts. Utilities, generators, and repair vendors have used these guidelines to perform repairs on blades, turbine vanes, and combustion hardware. Guidelines now exist for a variety of conventional and advanced General Electric, Siemens/Westinghouse, Alstom, and Mitsubishi heavy fram...

2011-12-27T23:59:59.000Z

46

Alloy 600 Repairs with PTAW Process  

Science Conference Proceedings (OSTI)

Many utilities have Alloy 600 reactor vessel heads (RVHs) that are susceptible to primary water stress corrosion cracking (PWSCC), but have not cracked to date. This has prompted an exploration of repair and mitigation options to prevent future degradation of the RVH. Inconel 52 and Inconel 152, which are resistant to PWSCC, have been identified as potential repair alloys for Alloy 600 type repairs, and have been evaluated with the gas tungsten arc welding (GTAW) and shielded metal arc welding (SMAW) pro...

2003-06-27T23:59:59.000Z

47

The Gordon conference on mammalian DNA repair  

SciTech Connect

A brief overview of the Gordon Conference on Mammalian Repair held February 1-5, 1993 in Ventura, California is presented.

Cleaver, J.E.; Smerdon, M.J.

1993-12-31T23:59:59.000Z

48

International congress on DNA damage and repair: Book of abstracts  

SciTech Connect

This document contains the abstracts of 105 papers presented at the Congress. Topics covered include the Escherichia coli nucleotide excision repair system, DNA repair in malignant transformations, defective DNA repair, and gene regulation. (TEM)

Not Available

1987-01-01T23:59:59.000Z

49

NSLS Services | Repair & Equipment Services  

NLE Websites -- All DOE Office Websites (Extended Search)

Repair & Equipment Services Repair & Equipment Services Cleaning Facility (BNL Central Shops) Solvent cleaning of vacuum parts and leak checking service is also available. Work is billed to each user via a BNL ILR. Contact the NSLS Building Manager to arrange for any of these services. Electronics Repair Limited repairs for electronic equipment are available from an outside contractor through the Control Room. Contact Control Room Supervisor Randy Church (x2550 or x2736, pager 5310). Shipping memos are filled out on the web, and pick ups are on Fridays. Come to the Control Room for assistance. The user should call the contractor on the day before scheduled pickups to alert the contractor of the pickup. Items to be repaired should be left in the Control Room with the completed shipping memo. Costs are charged to the

50

SOUTHVIEWDR Center for Applied  

E-Print Network (OSTI)

/Geology Chemistry Biological Sciences Geology Lab Bookstore Reed Milledge Payne Memorial Hall SANFORD DR Center CAES Activity Center Visitors Center (Four Towers) Greenhouses Center for Applied Isotope Study

Hall, Daniel

51

Applied Energy Programs  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Energy Programs Applied Energy Programs Applied Energy Programs Los Alamos is using its world-class scientific capabilities to enhance national energy security by developing energy sources with limited environmental impact and by improving the efficiency and reliability of the energy infrastructure. CONTACT US Acting Program Director Melissa Fox (505) 663-5538 Email Applied Energy Program Office serves as the hub connecting the Laboratory's scientific and technical resources to DOE sponsors, DoD programs, and to industry. The Applied Energy Program Office manages Los Alamos National Laboratory programs funded by the Department of Energy's (DOE's) Offices of Energy Efficiency/Renewable Energy, Electricity Delivery and Energy Reliability, and Fossil Energy. With energy use increasing across the nation and the

52

Welding and Repair Technology Center: Repair Technology for Degraded Pressure Vessel and Heat Exchanger Shells  

Science Conference Proceedings (OSTI)

BackgroundPressure vessels and heat exchangers are subject to a number of degradation mechanisms that can cause thinning of component walls and deterioration of internal components. With many repair options available, the Electric Power Research Institute (EPRI) Welding and Repair Technology Center (WRTC) has developed this report to assist operations and engineering personnel who are faced with defective or failed vessel components. Many available repair options allow ...

2013-10-30T23:59:59.000Z

53

DART: a data acquisition and repairing tool  

Science Conference Proceedings (OSTI)

An architecture is proposed providing robust data acquisition facilities from input documents containing tabular data. This architecture is based on a data-repairing framework exploiting integrity constraints defined on the input data to support the ...

Bettina Fazzinga; Sergio Flesca; Filippo Furfaro; Francesco Parisi

2006-03-01T23:59:59.000Z

54

The technical and economic success of repairable PDC bits  

Science Conference Proceedings (OSTI)

Repairable PDC bits have saved operators and contractors millions of dollars in bit costs alone. The repair of steel-bodied PDC bits has been going on for over 4 years but more recently, due to technical innovations, matrix body bits are becoming repairable. DBS was concerned when starting the repairability project that the quality of a repaired bit be close to that of a new bit. Conventional thinking had it that the repaired bit would at best be slightly inferior to a new bit. However, during our initial evaluation of repaired steel-bodied bits, the authors noticed that, remarkably, the repaired bits overall drilled more footage per run at a higher rate of penetration than new bits. After over 200 bits had been run, repaired, and rerun, in every case and for every bit style the average footage and ROP were slightly higher for the repaired bit.

Matson, L.; Stratabit, D.B.

1989-03-01T23:59:59.000Z

55

Essays in applied microeconomics  

E-Print Network (OSTI)

This dissertation consists of three chapters on topics in applied microeconomics. In the first chapter. I investigate whether voters are more likely to support additional spending on local public services when they perceive ...

Aron-Dine, Aviva

2012-01-01T23:59:59.000Z

56

Energy and Technology Review: Unlocking the mysteries of DNA repair  

SciTech Connect

DNA, the genetic blueprint, has the remarkable property of encoding its own repair following diverse types of structural damage induced by external agents or normal metabolism. We are studying the interplay of DNA damaging agents, repair genes, and their protein products to decipher the complex biochemical pathways that mediate such repair. Our research focuses on repair processes that correct DNA damage produced by chemical mutagens and radiation, both ionizing and ultraviolet. The most important type of DNA repair in human cells is called excision repair. This multistep process removes damaged or inappropriate pieces of DNA -- often as a string of 29 nucleotides containing the damage -- and replaces them with intact ones. We have isolated, cloned, and mapped several human repair genes associated with the nucleotide excision repair pathway and involved in the repair of DNA damage after exposure to ultraviolet light or mutagens in cooked food. We have shown that a defect in one of these repair genes, ERCC2, is responsible for the repair deficiency in one of the groups of patients with the recessive genetic disorder xeroderma pigmentosum (XP group D). We are exploring ways to purify sufficient quantities (milligrams) of the protein products of these and other repair genes so that we can understand their functions. Our long-term goals are to link defective repair proteins to human DNA repair disorders that predispose to cancer, and to produce DNA-repair-deficient mice that can serve as models for the human disorders.

Quirk, W.A.

1993-04-01T23:59:59.000Z

57

Applied Science/Techniques  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Science/Techniques Applied Science/Techniques Applied Science/Techniques Print The ALS is an excellent incubator of new scientific techniques and instrumentation. Many of the technical advances that make the ALS a world-class soft x-ray facility are developed at the ALS itself. The optical components in use at the ALS-mirrors and lenses optimized for x-ray wavelengths-require incredibly high-precision surfaces and patterns (often formed through extreme ultraviolet lithography at the ALS) and must undergo rigorous calibration and testing provided by beamlines and equipment from the ALS's Optical Metrology Lab and Berkeley Lab's Center for X-Ray Optics. New and/or continuously improved experimental techniques are also a crucial element of a thriving scientific facility. At the ALS, examples of such "technique" highlights include developments in lensless imaging, soft x-ray tomography, high-throughput protein analysis, and high-power coherent terahertz radiation.

58

HANFORD SITE LOW EXPOSURE PIPELINE REPAIR USING A NON-METALLIC COMPOSITE SYSTEM  

Science Conference Proceedings (OSTI)

At the Department of Energy, Richland Operations (DOE-RL) Hanford site in eastern Washington, a 350 mm (14 inch) diameter high density polyethylene (HDPE) pump recirculation pipeline failed at a bonded joint adjacent to a radiologically and chemically contaminated groundwater storage basin. The responsible DOE-RL contractor, CH2MHill Plateau Remediation Company, applied a fiberglass reinforced plastic (composite) field repair system to the failed joint. The system was devised specifically for the HDPE pipe repair at the Hanford site, and had not been used on this type of plastic piping previously. This paper introduces the pipe failure scenario, describes the options considered for repair and discusses the ultimate resolution of the problem. The failed pipeline was successfully returned to service with minimal impact on waste water treatment plant operating capacity. Additionally, radiological and chemical exposures to facility personnel were maintained as low as reasonably achievable (ALARA). The repair is considered a success for the near term, and future monitoring will prove whether the repair can be considered for long term service and as a viable alternative for similar piping failures at the Hanford site.

HUTH RJ

2009-11-12T23:59:59.000Z

59

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Download CX-008879: Categorical Exclusion Determination Pearl-Marion No.1 Line Tower 211 Bank Repair Project CX(s) Applied: B1.3 Date: 08132012 Location(s): Oregon Offices(s):...

60

CX-008879: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-008879: Categorical Exclusion Determination Pearl-Marion No.1 Line Tower 211 Bank Repair Project CX(s) Applied: B1.3 Date: 08132012 Location(s): Oregon Offices(s):...

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

CX-010543: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-010543: Categorical Exclusion Determination Repair of Big Hill Texas-14 Transformer CX(s) Applied: B1.3 Date: 06242013 Location(s): Texas Offices(s): Strategic...

62

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

51 - 7460 of 15,695 results. Download CX-002989: Categorical Exclusion Determination Repair Storm Water Drainage Outside the T-Area Cap CX(s) Applied: B1.3 Date: 06162010...

63

Categorical Exclusion Determinations: Savannah River Operations Office |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

August 13, 2013 August 13, 2013 CX-011158: Categorical Exclusion Determination Subcontractor Repair of Roof Leaks at 717-11A CX(s) Applied: B1.3 Date: 08/13/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office August 13, 2013 CX-011157: Categorical Exclusion Determination Subcontractor Roof Repairs in Telecom Room at 702-C CX(s) Applied: B1.3 Date: 08/13/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office August 8, 2013 CX-011163: Categorical Exclusion Determination Subcontractor Repair of Roof Leaks at 730-4B CX(s) Applied: B1.3 Date: 08/08/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office August 8, 2013 CX-011162: Categorical Exclusion Determination Subcontractor Repair of Roof Leaks at 730-1B CX(s) Applied: B1.3

64

CX-004400: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Repair Brick Support Plates on Connecting Bridges - Building 58CX(s) Applied: B2.3Date: 11/05/2010Location(s): Allegheny City, PennsylvaniaOffice(s): Fossil Energy, National Energy Technology Laboratory

65

CX-001370: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Repair Water Leak at 607-59G at Central Sanitary Wastewater Plant CX(s) Applied: B1.3 Date: 03162010 Location(s): Aiken, South Carolina...

66

CX-008879: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Pearl-Marion No.1 Line Tower 21/1 Bank Repair Project CX(s) Applied: B1.3 Date: 08/13/2012 Location(s): Oregon Offices(s): Bonneville Power Administration

67

CX-009322: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Area of Interest 2: Wellbore Seal Repair Using Nanocomposite Materials CX(s) Applied: A9, B3.6 Date: 08/30/2012 Location(s): New Mexico Offices(s): National Energy Technology Laboratory

68

CX-009321: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Area of Interest 2: Wellbore Seal Repair Using Nanocomposite Materials CX(s) Applied: A9, B3.6 Date: 08/30/2012 Location(s): New Mexico Offices(s): National Energy Technology Laboratory

69

CX-009510: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CX-009510: Categorical Exclusion Determination Strategic Petroleum Reserve Emergency Pipeline and Piping Repair, 2013-2017 CX(s) Applied: B5.4 Date: 10302012 Location(s): CX:...

70

CX-008638: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Excavate to Repair Underground Domestic Water Leak between Tanks 5 and 7 CX(s) Applied: B1.3 Date: 05/29/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office

71

CX-007461: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

High Resolution 3-dimensional Laser Imaging for Inspection, Maintenance, Repair and Operations - Phase II CX(s) Applied: B3.6 Date: 12/20/2011 Location(s): Colorado Offices(s): National Energy Technology Laboratory

72

CX-007511: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Determination Record of Categorical Exclusion for Repair Erosion Problems at Big Hill Raw Water Intake Structure CX(s) Applied: B1.3 Date: 12052011 Location(s): Texas Offices(s):...

73

CX-008766: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Asphalt Repair and Concrete Work Activities at the Grand Junction, Colorado, Disposal Site CX(s) Applied: B1.3 Date: 05/18/2012 Location(s): Colorado Offices(s): Legacy Management

74

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Download CX-010543: Categorical Exclusion Determination Repair of Big Hill Texas-14 Transformer CX(s) Applied: B1.3 Date: 06242013 Location(s): Texas Offices(s): Strategic...

75

CX-008949: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Novel Materials for Robust Repair of Leaky Wellbores in Carbon Dioxide Storage Formations CX(s) Applied: A9, B3.6 Date: 08/13/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory

76

CX-009217: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Elmwood Dog Kennel Repair (Hurricane Isaac) CX(s) Applied: B1.3 Date: 09/24/2012 Location(s): CX: none Offices(s): Strategic Petroleum Reserve Field Office

77

CX-010106: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Flaming Gorge Microwave Site Communications Building Access Road Repairs CX(s) Applied: B1.3 Date: 04/01/2013 Location(s): Utah Offices(s): Western Area Power Administration-Rocky Mountain Region

78

Applied Mathematics | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Mathematics Applied Mathematics Our work in applied mathematics ranges from algorithm design, to development of software tools and technology, to advanced simulations in...

79

Applying lean manufacturing initiatives to naval ship repair centers : implementation and lessons learned  

E-Print Network (OSTI)

The United States Navy is under pressure to reduce the cost of fleet maintenance in order to redirect funds for the construction of new ships and submarines. The Navy looks to private industry for process improvement ideas ...

Murphy, Brian P. (Brian Patrick), 1963-

2004-01-01T23:59:59.000Z

80

HYDROGEN EFFECTS ON LASER ENGINEERED NET SHAPE (LENS) REPAIRED WELDMENTS  

DOE Green Energy (OSTI)

New methods of repairing mis-machined components are always of interest. In this study, an innovative method using Laser Engineered Net Shape{trademark} (LENS{reg_sign}) forming was used to repair intentionally mis-machined test articles. The components were repaired and subsequently hydrogen charged and burst tested. The LENS repair did not have an adverse effect on the solid state weld process that was used to repair the components. Hydrogen charged samples failed in a similar manner to the uncharged samples. Overall, the prospects for LENS repairing similar products are favorable and further work is encouraged.

Korinko, P; Thad Adams, T

2006-10-06T23:59:59.000Z

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Applied Science/Techniques  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Science/Techniques Print Applied Science/Techniques Print The ALS is an excellent incubator of new scientific techniques and instrumentation. Many of the technical advances that make the ALS a world-class soft x-ray facility are developed at the ALS itself. The optical components in use at the ALS-mirrors and lenses optimized for x-ray wavelengths-require incredibly high-precision surfaces and patterns (often formed through extreme ultraviolet lithography at the ALS) and must undergo rigorous calibration and testing provided by beamlines and equipment from the ALS's Optical Metrology Lab and Berkeley Lab's Center for X-Ray Optics. New and/or continuously improved experimental techniques are also a crucial element of a thriving scientific facility. At the ALS, examples of such "technique" highlights include developments in lensless imaging, soft x-ray tomography, high-throughput protein analysis, and high-power coherent terahertz radiation.

82

Valve Application, Maintenance, and Repair Guide  

Science Conference Proceedings (OSTI)

The Valve Application, Maintenance, and Repair Guide is a two-volume series that provides a generic overview of valve application, selection, maintenance, and repair. Volume 1 of the series is a comprehensive reference on the application and use of valves that provides guidance on the selection of specific types of valves on the basis of functional and system requirements. This document is based on an earlier EPRI document (NP-6516, Guide for the Application and Use of Valves in Power Plant Systems). Ext...

1999-05-07T23:59:59.000Z

83

Repairable chip bonding/interconnect process  

DOE Patents (OSTI)

A repairable, chip-to-board interconnect process which addresses cost and testability issues in the multi-chip modules is disclosed. This process can be carried out using a chip-on-sacrificial-substrate technique, involving laser processing. This process avoids the curing/solvent evolution problems encountered in prior approaches, as well is resolving prior plating problems and the requirements for fillets. For repairable high speed chip-to-board connection, transmission lines can be formed on the sides of the chip from chip bond pads, ending in a gull wing at the bottom of the chip for subsequent solder. 10 figs.

Bernhardt, A.F.; Contolini, R.J.; Malba, V.; Riddle, R.A.

1997-08-05T23:59:59.000Z

84

Repairable chip bonding/interconnect process  

DOE Patents (OSTI)

A repairable, chip-to-board interconnect process which addresses cost and testability issues in the multi-chip modules. This process can be carried out using a chip-on-sacrificial-substrate technique, involving laser processing. This process avoids the curing/solvent evolution problems encountered in prior approaches, as well is resolving prior plating problems and the requirements for fillets. For repairable high speed chip-to-board connection, transmission lines can be formed on the sides of the chip from chip bond pads, ending in a gull wing at the bottom of the chip for subsequent solder.

Bernhardt, Anthony F. (Berkeley, CA); Contolini, Robert J. (Livermore, CA); Malba, Vincent (Livermore, CA); Riddle, Robert A. (Tracy, CA)

1997-01-01T23:59:59.000Z

85

Microsoft PowerPoint - Powerpoint_WebRepair.ppt [Compatibility...  

NLE Websites -- All DOE Office Websites (Extended Search)

strand break repair is usually error free. g p y * Double strand breaks can be either error free or error t i i hi h t prone, containing a high error rate. Mechanisms of Repair...

86

Improved syntactic models for parsing speech with repairs  

Science Conference Proceedings (OSTI)

This paper introduces three new syntactic models for representing speech with repairs. These models are developed to test the intuition that the erroneous parts of speech repairs (reparanda) are not generated or recognized as such while occurring, but ...

Tim Miller

2009-05-01T23:59:59.000Z

87

Survey of Gas Turbine Component Repair Shops - 2008 Update  

Science Conference Proceedings (OSTI)

Aftermarket repair services for gas turbine O&M has been undergoing continual transformation beginning with the emergence of independent shops in the 1980s. The original equipment manufacturers (OEMs) began to aggressively pursue repair services in the late 1990s. Gas turbine hot section component repair/replacement coupled with inspection/overhaul technical support has come to be known broadly as long-term service agreements (LTSAs). These agreements often extend from 6 to 18 years. The repair business ...

2009-03-17T23:59:59.000Z

88

Welding and Repair Technology Center: Underwater Laser Welding Studies  

Science Conference Proceedings (OSTI)

Repair of internal reactor components has been a continuing challenge for the nuclear industry. High radiation levels, underwater environment, and altered material weldability have made traditional repair methods more difficult to use for internal component repair. One of the key issues is to make seal-weld repairs on cracks that might exist due to stress corrosion or fatigue. Sealing of these cracks by welding might be necessary to maintain pressure boundary or flow requirements. During this research pr...

2009-12-21T23:59:59.000Z

89

HRSG Material Selection and Repair Guidelines  

Science Conference Proceedings (OSTI)

The number of failures in heat recovery steam generator (HRSG) components has been quite high during the past decade. Many of these failures are attributed to poor design, improper operation, poor fabrication, or poor installation practices. This report provides repair practices and procedures currently being used to correct a number of these problems. It also identifies domestic and international materials commonly employed.

2004-03-31T23:59:59.000Z

90

Applied antineutrino physics workshop.  

Science Conference Proceedings (OSTI)

This workshop is the fourth one of a series that includes the Neutrino Geophysics Conference at Honolulu, Hawaii, which I attended in 2005. This workshop was organized by the Astro-Particle and Cosmology laboratory in the recently opened Condoret building of the University of Paris. More information, including copies of the presentations, on the workshop is available on the website: www.apc.univ-paris7.fr/AAP2007/. The workshop aims at opening neutrino physics to various fields such that it can be applied in geosciences, nuclear industry (reactor and spent fuel monitoring) and non-proliferation. The workshop was attended by over 60 people from Europe, USA, Asia and Brazil. The meeting was also attended by representatives of the Comprehensive nuclear-Test Ban Treaty (CTBT) and the International Atomic Energy Agency (IAEA). The workshop also included a workshop dinner on board of a river boat sailing the Seine river.

Lund, James C.

2008-01-01T23:59:59.000Z

91

Welding and Repair Technology Center: Welding and Repair Technical Issues in ASME Section XI  

Science Conference Proceedings (OSTI)

The EPRI Welding and Repair Technology Center (WRTC) supports and is involved in numerous ASME Code changes and new initiatives associated with welding, repair, and replacement activities in the nuclear power generation industry. Due to the complicated nature and numerous topics often associated with code and regulatory issues it can be difficult to keep abreast of the current status and progress of changes and new initiatives. This document is intended to be a single reference for WRTC members to ...

2012-12-20T23:59:59.000Z

92

Welding and Repair Technology Center: Welding and Repair Technical Issues in ASME Section XI  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute (EPRI) Welding and Repair Technology Center (WRTC) was involved in numerous ASME Code changes and new initiatives associated with welding, repair, and replacement activities in the nuclear power generation industry during the year 2013. Due to the complicated nature of code and regulatory issues and its variety of topics, it can be difficult to keep abreast of the current status, progress, and new initiatives. This report is intended to be a single reference for ...

2013-12-16T23:59:59.000Z

93

Categorical Exclusion Determinations: B1.3 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 20, 2013 June 20, 2013 CX-010655: Categorical Exclusion Determination Roof Repair on Crane Maintenance Area Roof CX(s) Applied: B1.3 Date: 06/20/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office June 18, 2013 CX-010656: Categorical Exclusion Determination Stormwater Drainage Repair CX(s) Applied: B1.3 Date: 06/18/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office June 17, 2013 CX-010662: Categorical Exclusion Determination Reroute Diesel Water Cooling Line at 241-125H CX(s) Applied: B1.3 Date: 06/17/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office June 17, 2013 CX-010661: Categorical Exclusion Determination Repair Roof at 717-K CX(s) Applied: B1.3 Date: 06/17/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office

94

Applied and Computational Mathematics Division  

Science Conference Proceedings (OSTI)

Applied and Computational Mathematics Division. Topic Areas. Mathematics; Scientific Computing; Visualization; Quantum Computing. ...

2013-05-09T23:59:59.000Z

95

Welding and Repair Technology Center: Overlay Handbook  

Science Conference Proceedings (OSTI)

This report reflects the commitment of the Electric Power Research Institute (EPRI) to serving its members by developing practical tools and guidance in response to specific needs of the industry.BackgroundThe discovery of primary water stress corrosion cracking (PWSCC) in pressurized water reactor (PWR) vessel heads and components has led to the use of corrosion-resistant high-nickel welding alloys for repair and mitigation activities. To date, more than 30 ...

2013-11-25T23:59:59.000Z

96

Distribution System Audits, Leak Detection, and Repair: Kirtland Air Force Base Leak Detection and Repair Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Best Management Practice Best Management Practice Case Study #3 Distribution System Audits, Leak Detection, and Repair Kirtland Air Force Base - Leak Detection and Repair Program Overview Kirtland Air Force Base (AFB) performed an award winning leak detection and repair program in 2006. The results of the project are saving Kirtland AFB 179 million gallons each year, which is over 16% of the total water use at the base. Kirtland AFB is located on 52,000 acres, southeast and adjacent to Albuquerque, New Mexico. The area is a high altitude desert, only receiving about 8 inches of rain each year. Kirtland AFB draws water from an under- ground aquifer via seven production wells through- out the base. The base also has access to water from the City of Albuquerque. The underground water

97

Distribution System Audits, Leak Detection, and Repair: Kirtland Air Force Base Leak Detection and Repair Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Best Management Practice Best Management Practice Case Study #3 Distribution System Audits, Leak Detection, and Repair Kirtland Air Force Base - Leak Detection and Repair Program Overview Kirtland Air Force Base (AFB) performed an award winning leak detection and repair program in 2006. The results of the project are saving Kirtland AFB 179 million gallons each year, which is over 16% of the total water use at the base. Kirtland AFB is located on 52,000 acres, southeast and adjacent to Albuquerque, New Mexico. The area is a high altitude desert, only receiving about 8 inches of rain each year. Kirtland AFB draws water from an under- ground aquifer via seven production wells through- out the base. The base also has access to water from the City of Albuquerque. The underground water

98

Low Dose Radiation Research Program: Quantification of Repair of  

NLE Websites -- All DOE Office Websites (Extended Search)

Quantification of Repair of Low-Dose-Induced DNA Double-Strand Quantification of Repair of Low-Dose-Induced DNA Double-Strand Breaks in Diploid Human Cells Authors: David Schild,1 and Larry H. Thompson,2 Institutions: 1Life Sciences Division, Lawrence Berkeley National Laboratory; and 2BBR Program, Lawrence Livermore National Laboratory Double-strand breaks (DSBs) are the biochemical lesions of primary concern in radiation related health effects. Compelling evidence from rodent and chicken model systems indicates that homologous recombinational repair (HRR) plays an essential role for cell viability in the repair of spontaneous DSBs arising during DNA replication and an important role in the repair of IR-induced DSBs. IR-induced DSBs are also repaired by error-prone nonhomologous end joining (NHEJ). Using hTERT-immortalized

99

Applied Optoelectronics | Open Energy Information  

Open Energy Info (EERE)

optical semiconductor devices, packaged optical components, optical subsystems, laser transmitters, and fiber optic transceivers. References Applied Optoelectronics1...

100

Combustion Turbine Repair Guidelines: General Electric MS6001 Model B  

Science Conference Proceedings (OSTI)

For more than a decade, EPRI has been developing gas turbine hot section component repair and coating guidelines to assist utilities in the refurbishment of these critical and expensive parts. Utilities, generators, and repair vendors have used these guidelines to perform repairs on blades, turbine vanes, and combustion hardware. Guidelines now exist for a variety of conventional and advanced General Electric, Siemens/Westinghouse, Alstom, and Mitsubishi heavy frame gas turbines. The guidelines in this v...

2009-12-09T23:59:59.000Z

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Combustion Turbine Repair Guidelines: Siemens V94.3A  

Science Conference Proceedings (OSTI)

For more than a decade, EPRI has been developing gas turbine hot section component repair and coating guidelines to assist utilities in the refurbishment of these critical and expensive parts. Utilities and repair vendors have used these guidelines to perform repairs on blades, turbine vanes, and combustion hardware. Guidelines now exist for a variety of conventional and advanced General Electric, Siemens/Westinghouse, Alstom, and Mitsubishi heavy frame gas turbines. The guidelines in this volume address...

2009-03-06T23:59:59.000Z

102

Guide for Determining Motor Repair versus Motor Replacement  

Science Conference Proceedings (OSTI)

The Motor Replacement/Refurbishment Guide (MRRG) was written to aid with the determination on whether to repair an existing motor or to purchase a replacement motor. This guideline provides the basic tools necessary to make a determination based upon, but not limited to, the extent of the repair scope and the cost of the repair. This guideline presents a process to be utilized by the station or corporate motor specialist to assess the motor repair scope both initial and revised. The data gathering proces...

2005-12-23T23:59:59.000Z

103

Lower power prices and high repair costs drive nuclear retirements ...  

U.S. Energy Information Administration (EIA)

However, concerns over the length of the review process and the high costs associated with steam generator repairs led SCE to retire both reactors.

104

Federal Facilities Maintenance, Repair Report Calls for Action  

SciTech Connect

This article is an overview of a recent report by the Federal Facilities Council on "Predicting Outcomes from Investments in Maintenance and Repair of Federal Facilities."

Bartlett, Rosemarie

2012-10-01T23:59:59.000Z

105

Low Dose Radiation Research Program: Quantification of Repair...  

NLE Websites -- All DOE Office Websites (Extended Search)

Quantification of Repair of Low-Dose-Induced DNA Double-Strand Breaks in Diploid Human Cells David Schild Lawrence Berkeley National Laboratory Berkeley, California Why this...

106

NFRC Procedures for Applied Films  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Films Applied Films Last update: 12/10/2013 07:29 PM NFRC now has a procedure for adding applied films to substrates in Optics5 and importing those applied film constructions into WINDOW5 to be used in a whole product calculation. The information presented below is provided to help simulators with this process. Feel free to contact us at WINDOWHelp@lbl.gov with questions or comments. NFRC Applied Film Procedure Applied Film Procedures (approved by NFRC) (PDF file) Approved Applied Film List (IGDB 33.0) (PDF file) NFRC Laminate Procedure Training Powerpoint with Examples (This Powerpoint presentation was used in the NFRC web based training sessions in December 2006 and January 2007) PowerPoint Presentation (PPT file) PowerPoint Presentation (PDF file) Help and Troubleshooting

107

Classifying aging genes into DNA repair or non-DNA repair-related categories  

Science Conference Proceedings (OSTI)

The elderly population in almost every country is growing faster than ever before. However, our knowledge about the aging process is still limited despite decades of studies on this topic. In this report, we focus on the gradual accumulation of DNA damage ... Keywords: DNA-repair, aging, classification, feature selection, random forest

Yaping Fang, Xinkun Wang, Elias K. Michaelis, Jianwen Fang

2013-07-01T23:59:59.000Z

108

Repair worlds: maintenance, repair, and ICT for development in rural Namibia  

Science Conference Proceedings (OSTI)

This paper explores the nature and centrality of maintenance and repair ('M&R') work in the extension and sustainability of ICT infrastructure in the global South. Drawing from pragmatist traditions in CSCW and the social sciences at large, we develop ... Keywords: ethnography, ictd, infrastructure, maintenance, theory

Steven J. Jackson; Alex Pompe; Gabriel Krieshok

2012-02-01T23:59:59.000Z

109

Aircraft Gas Turbine Blade and Vane Repair  

Science Conference Proceedings (OSTI)

Gas turbine blades experience dimensional .... platinum applied in separate gas phase or electroplating ..... surfaces are natural consequences of fluoride.

110

Structural Repairs for Transmission Structures: Anchors, Poles, and Lattice Construction  

Science Conference Proceedings (OSTI)

This document provides a brief overview of repair methods for transmission line lattice and pole structures and provides guidance on the complex financial issue of how to determine whether a corrosion repair should be accounted for as capital or expense.   BackgroundAs the North American electrical transmission system ages, many issues have to be addressed to keep the system functioning. The high voltage ...

2012-12-12T23:59:59.000Z

111

Development of a composite repair system for reinforcing offshore risers  

E-Print Network (OSTI)

A research program was conducted to investigate the application of composite materials in repairing corroded offshore risers, leading to the development of an optimized repair using a hybrid carbon/E-glass system. The objective of this research program was to investigate the feasibility of extending onshore composite repair techniques to offshore risers by developing integrated analytical and experimental methods. The study considered loads typical for offshore risers including internal pressure, tension, and bending. To fulfill this objective efforts included a state of the art assessment of current composite repair technology, designing a carbon-based composite repair system optimized by numerical simulation with prototype testing, and providing guidelines for industry in repairing and reinforcing offshore risers using composite materials. Research efforts integrated numerical modeling, as well as full-scale testing that included four composite repair manufacturers to assess the current state of the art on pipe samples with simulated corrosion reinforced with composite materials. Analysis and testing were also performed on the optimized carbon/E-glass system. The results of this program demonstrated that composite materials are a viable means for repairing corroded offshore steel risers as adequate reinforcement ensures that the steel risers are not loaded beyond acceptable design limits. For corroded risers, the results demonstrated through analysis and full-scale testing efforts that properly designed composite repair systems can provide adequate structural reinforcement to ensure that excessive strains are not induced in the steel when subjected to internal pressure, axial tension, and bending design loads. This was verified experimentally using strain gages placed beneath the composite repair. This program is the first of its kind and is thought to contribute significantly to the future of offshore riser repairs. It is likely that the findings of this program will foster future investigations involving operators by integrating their insights regarding the need for composite repair based on emerging technology. One of the most significant contributions to the existing body of work is the use of limit analysis in developing design limits for the repair of steel pipes using composite materials.

Alexander, Christopher Richard

2007-12-01T23:59:59.000Z

112

Categorical Exclusion Determinations: Savannah River Operations Office |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 20, 2013 June 20, 2013 CX-010655: Categorical Exclusion Determination Roof Repair on Crane Maintenance Area Roof CX(s) Applied: B1.3 Date: 06/20/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office June 18, 2013 CX-010657: Categorical Exclusion Determination Western Sector Treatment System Soil Vapor Extraction Wells CX(s) Applied: B3.1 Date: 06/18/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office June 18, 2013 CX-010656: Categorical Exclusion Determination Stormwater Drainage Repair CX(s) Applied: B1.3 Date: 06/18/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office June 17, 2013 CX-010662: Categorical Exclusion Determination Reroute Diesel Water Cooling Line at 241-125H CX(s) Applied: B1.3 Date: 06/17/2013

113

Guidelines for the Repair of Nuclear Power Plant Safety-Related Motors (NCIG-12)  

Science Conference Proceedings (OSTI)

These guidelines, the twelfth in a series cosponsored by NCIG, provide utilities with information on the repair of all classes of safety-related electric motors. Use of this information will permit capable repair shops to repair motors under the extension of utility quality assurance programs or by dedication of a commercially repaired motor.

1990-04-24T23:59:59.000Z

114

BNL | Accelerators for Applied Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Accelerators for Applied Research Accelerators for Applied Research Brookhaven National Lab operates several accelerator facilities dedicated to applied research. These facilities directly address questions and concerns on a tremendous range of fields, including medical imaging, cancer therapy, computation, and space exploration. Leading scientists lend their expertise to these accelerators and offer crucial assistant to collaborating researchers, pushing the limits of science and technology. Interested in gaining access to these facilities for research? See the contact number listed for each facility. RHIC tunnel Brookhaven Linac Isotope Producer The Brookhaven Linac Isoptope Producer (BLIP)-positioned at the forefront of research into radioisotopes used in cancer treatment and diagnosis-produces commercially unavailable radioisotopes for use by the

115

CRC handbook of applied thermodynamics  

Science Conference Proceedings (OSTI)

The emphasis of this book is on applied thermodynamics, featuring the stage of development of a process rather than the logical development of thermodynamic principles. It is organized according to the types of problems encountered in industry, such as probing research, process assessment, and process development. The applied principles presented can be used in most areas of industry including oil and gas production and processing, chemical processing, power generation, polymer production, food processing, synthetic fuels production, specialty chemicals and pharmaceuticals production, bioengineered processes, etc.

Palmer, D.A. (Amoco Chemical Corp., Naperville, IL (USA). Research and Development Dept.)

1987-01-01T23:59:59.000Z

116

Optimizing chondrogenic factors and protein delivery methods for cartilage repair  

E-Print Network (OSTI)

Joint injuries are common and often result in damage to cartilage, which has a limited ability to repair itself. Tissue engineering is a promising approach for improving cartilage healing in which biomaterials and chemical ...

Florine, Emily Marie

2012-01-01T23:59:59.000Z

117

Competing risks for repairable systems: A data study  

E-Print Network (OSTI)

". The maintainable items making up the compressor unit are, among others, valves, internal piping and radial bearing by the corresponding repair. We will therefore follow the OREDA Handbook and make our analysis at the subunit level

Langseth, Helge

118

Checkpoint repair for out-of-order execution machines  

Science Conference Proceedings (OSTI)

Out-of-order execution and branch prediction are two mechanisms that can be used profitably in the design of Supercomputers to increase performance. Unfortunately this means there must be some kind of repair mechanism, since situations do occur that ...

W. W. Hwu; Y. N. Patt

1987-06-01T23:59:59.000Z

119

Solar Water Heating System Maintenance and Repair | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Water Heating System Maintenance and Repair Water Heating System Maintenance and Repair Solar Water Heating System Maintenance and Repair May 30, 2012 - 2:35pm Addthis Rooftop solar water heaters need regular maintenance to operate at peak efficiency. | Photo from iStockphoto.com Rooftop solar water heaters need regular maintenance to operate at peak efficiency. | Photo from iStockphoto.com Solar energy systems require periodic inspections and routine maintenance to keep them operating efficiently. Also, from time to time, components may need repair or replacement. You should also take steps to prevent scaling, corrosion, and freezing. You might be able to handle some of the inspections and maintenance tasks on your own, but others may require a qualified technician. Ask for a cost estimate in writing before having any work done. For some systems, it may

120

Gas Turbine Compressor Field Repair Guideline: GE 7FA  

Science Conference Proceedings (OSTI)

This guideline is designed to assist gas turbine owners confronted with limited damage to compressor rotating blade airfoils. The guideline addresses typical damage to the airfoil tip and leading edge where a limited amount of material trimming and blending is allowable. The guideline provides an engineering basis for implementing safe repairs and avoiding possible risk of airfoil failure due to high-cycle fatigue. In-situ field repair criteria are given for each compressor row R-0 through R-17 for ...

2012-12-03T23:59:59.000Z

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

On site ESP repair pays off in Indonesia  

Science Conference Proceedings (OSTI)

This paper discusses how extensive production and use of electric submersible pumps (ESPs) in a remote region of Southeast Asia prompted an oil company to establish its own ESP repair facility. The facility has met three defined objectives, and the scope of its work has been expanded. However, several elements must be present before such a remote operation can be successful. This repair facility is at the Kasim Marine Terminal in Irian Jaya.

Haines, J.D. (Southeast Asia Corp., Applied Technics, Skiatook, OK (US)); Langnes, G.L. (Dragon Pacific Offshore Services PTE, Ltd. (SG)); Hadipoetro, H. (Petromer Trend Corp., Kasmim Marine Terminal, Irian Jaya (ID))

1990-09-10T23:59:59.000Z

122

Steam Turbine Casing and Valve Body Repair Guidelines  

Science Conference Proceedings (OSTI)

Today’s flexible mode of operation can result in damage to heavy-section components, such as steam turbine and valve casings. Thus, owners and operators are often faced with repairing a critical component. This report is part of a set of documents that address the key areas in the asset management of steam turbine casings and valve bodies—nondestructive evaluation and damage detection, repair, and life ...

2013-12-14T23:59:59.000Z

123

California Energy Commission Apply Today!  

E-Print Network (OSTI)

photovoltaic project in the future. Peak Demand Savings: 95 kW Energy Savings: 1,510,849 kWh Annual Energy CostCalifornia Energy Commission Apply Today! "The College implemented all of the recommended projects Programs Office (916) 654-4147 pubprog@energy.state.ca.us "CEC financing allowed us to install many

124

implementing bioenergy applied research & development  

E-Print Network (OSTI)

1 A Northern Centre for Renewable Energy implementing bioenergy applied research & development plant measures to become carbon neutral and operate on renewable energy. UNBC is uniquely positioned for Climate Solutions, and UNBC. The Green University Centre will be a model of energy efficiency

Northern British Columbia, University of

125

Vehicle Technologies Office: Applied Battery Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Battery Research to someone by E-mail Share Vehicle Technologies Office: Applied Battery Research on Facebook Tweet about Vehicle Technologies Office: Applied Battery...

126

Biochemical characterization of the E. coli Very Short Patch Repair pathway and its coordination with methyltransferase repair of 0?-methylguanine  

E-Print Network (OSTI)

The E. coli Very Short Patch Repair (VSPR) system corrects T:G mismatches that arise through Dcm-mediated methylation and subsequent deamination of the underlined cytosine residue in the palindromic sequence 5'-CCWGG-3' ...

Rye, Peter Thomas

2006-01-01T23:59:59.000Z

127

Involvement of DNA polymerase beta in repairing oxidative damages induced by antitumor drug adriamycin  

SciTech Connect

Adriamycin (ADM) is a widely used antineoplastic drug. However, the increasing cellular resistance has become a serious limitation to ADM clinical application. The most important mechanism related to ADM-induced cell death is oxidative DNA damage mediated by reactive oxygen species (ROS). Base excision repair (BER) is a major pathway in the repair of DNA single strand break (SSB) and oxidized base. In this study, we firstly applied the murine embryo fibroblasts wild-type (pol {beta} +/+) and homozygous pol {beta} null cell (pol {beta} -/-) as a model to investigate ADM DNA-damaging effects and the molecular basis underlying these effects. Here, cellular sensitivity to ADM was examined using colorimetric assay and colony forming assay. ADM-induced cellular ROS level and the alteration of superoxide dismutase (SOD) activity were measured by commercial kits. Further, DNA strand break, chromosomal damage and gene mutation were assessed by comet assay, micronucleus test and hprt gene mutation assay, respectively. The results showed that pol {beta} -/- cells were more sensitive to ADM compared with pol {beta} +/+ cells and more severe SSB and chromosomal damage as well as higher hprt gene mutation frequency were observed in pol {beta} -/- cells. ROS level in pol {beta} -/- cells increased along with decreased activity of SOD. These results demonstrated that pol {beta} deficiency could enable ROS accumulation with SOD activity decrease, further elevate oxidative DNA damage, and subsequently result in SSB, chromosome cleavage as well as gene mutation, which may be partly responsible for the cytotoxicity of ADM and the hypersensitivity of pol {beta} -/- cells to ADM. These findings suggested that pol {beta} is vital for repairing oxidative damage induced by ADM.

Liu Shukun; Wu Mei [Department of Environmental Health, Sichuan University, West China School of Public Health, Chengdu (China); Zhang Zunzhen, E-mail: zhangzunzhen@163.co [Department of Environmental Health, Sichuan University, West China School of Public Health, Chengdu (China)

2010-08-01T23:59:59.000Z

128

Recombinant methods for screening human DNA excision repair proficiency  

SciTech Connect

A method for measuring DNA excision repair in response to ultraviolet radiation (UV)-induced DNA damage has been developed, validated, and field-tested in cultured human lymphocytes. The methodology is amenable to population-based screening and should facilitate future epidemiologic studies seeking to investigate associations between excision repair proficiency and cancer susceptibility. The impetus for such endeavors derives from the belief that the high incidence of skin cancer in the genetic disorder xeroderma pigmentosum (XP) primarily is a result of the reduced capacity of patients cells to repair UV-induced DNA damage. For assay, UV-irradiated non-replicating recombinant plasmid DNA harboring a chloramphenicol acetyltransferase (CAT) indicator gene is introduced into lymphocytes using DEAE-dextran short-term transfection conditions. Exposure to UV induces transcriptionally-inactivating DNA photoproducts in the plasmid DNA which inactivate CAT gene expression. Excision repair of the damaged CAT gene is monitored indirectly as a function of reactivated CAT enzyme activity following a 40 hour repair/expression incubation period.

Athas, W.F.

1988-01-01T23:59:59.000Z

129

Polymer nanocomposites for high-temperature composite repair  

SciTech Connect

A novel repair agent for resin-injection repair of advanced high temperature composites was developed and characterized. The repair agent was based on bisphenol E cyanate ester (BECy) and reinforced with alumina nanoparticles. To ensure good dispersion and compatibility with the BECy matrix in nanocomposites, the alumina nanoparticles were functionalized with silanes. The BECy nanocomposites, containing bare and functionalized alumina nanoparticles, were prepared and evaluated for their thermal, mechanical, rheological, and viscoelastic properties. The monomer of BECy has an extremely low viscosity at ambient temperature, which is good for processability. The cured BECy polymer is a highly cross-linked network with excellent thermal mechanical properties, with a high glass transition temperature (T{sub g}) of 270 C and decomposition temperature above 350 C. The incorporation of alumina nanoparticles enhances the mechanical and rheological properties of the BECy nanocomposites. Additionally, the alumina nanoparticles are shown to catalyze the cure of BECy. Characterization of the nanocomposites included dynamic mechanical analysis, differential scanning calorimetry, thermogravimetric analysis, rheological and rheokinetic evaluation, and transmission electron microscopy. The experimental results show that the BECy nanocomposite is a good candidate as repair agent for resin-injection repair applications.

Sheng, Xia

2008-12-01T23:59:59.000Z

130

THREE ESSAYS ON APPLIED ECONOMICS  

E-Print Network (OSTI)

In this dissertation three essays were presented. In the first two essays we measure the consumer welfare changes caused by U.S. meat price changes. In the third essay the dynamic structure of international gasoline prices using the time series methodology is investigated. In chapter II, we investigate the U.S. consumer behavior on meat consumption depending on a linear expenditure system (LES), and then we simulate the welfare effects of a set of price changes on the U.S. meat consumption. The simulation results show that the amount of consumer welfare change for each meat is not same across the meats under the same percentage change of price. The simulation results also show that when all the prices are doubled the total amount of CV reaches almost the same amount of current total quarterly expenditures for the three meats. In chapter III, we apply the compensating variation (CV) approach for the measurement of consumer welfare losses associated with beef price changes. We applied the long-run cointegrating relationship in vector error correction model (VECM) to estimate the Marshallian demand function. Apparently, the use of long-run cointegration in VECM in deriving the direct Marshallian demand function to measure the consumer welfare change is the first attempt in the literature. This is one of the contributions of the study. The simulation results show that the amount of consumer welfare change for beef is compatible with the one derived from LES methodology. In chapter IV, an empirical framework to summarize the interdependence of four international gasoline markets (New York, U.S. Gulf Coast, Rotterdam and Singapore) is presented. For that purpose, we employ a structural VECM and directed acyclic graphs (DAGs). To solve the identification problem in structural VECM, we apply DAGs derived from contemporaneous VECM innovations. The impulse response functions show that the time period in which a shock in a market affects the other market is very short. Forecast error variance decompositions (FEVD) shows that in all markets, except the U.S. Gulf Coast market, current and past shocks in their own market explained the most of the volatility in their own market in the Short-run.

Shin, Sang-Cheol

2008-08-01T23:59:59.000Z

131

Applied Materials | Open Energy Information  

Open Energy Info (EERE)

Materials Materials Jump to: navigation, search Name Applied Materials Address 3050 Bowers Avenue Place Santa Clara, California Zip 95054 Sector Solar Stock Symbol AMAT Website http://www.appliedmaterials.co Coordinates 37.3775749°, -121.9794416° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.3775749,"lon":-121.9794416,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

132

Simple Maintenance Saves Costly Furnace Repair/Replacement | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Simple Maintenance Saves Costly Furnace Repair/Replacement Simple Maintenance Saves Costly Furnace Repair/Replacement Simple Maintenance Saves Costly Furnace Repair/Replacement January 6, 2010 - 8:26am Addthis Chris Stewart Senior Communicator at DOE's National Renewable Energy Laboratory For the past few weeks, my forced-air gas furnace has been on the fritz. I blame this on the fact that I haven't been as diligent as I should have been with regular furnace maintenance, which includes: Checking the condition of the vent connection pipe and chimney Checking the physical integrity of the heat exchanger Adjusting the controls to provide optimum water and air temperature settings for both efficiency and comfort Having a technician perform a combustion-efficiency test Checking the combustion chamber for cracks. Testing for carbon monoxide

133

Exposure Evaluation for Benzene, Lead and Noise in Vehicle and Equipment Repair Shops  

SciTech Connect

An exposure assessment was performed at the equipment and vehicle maintenance repair shops operating at the U. S. Department of Energy Hanford site, in Richland, Washington. The maintenance shops repair and maintain vehicles and equipment used in support of the Hanford cleanup mission. There are three general mechanic shops and one auto body repair shop. The mechanics work on heavy equipment used in construction, cranes, commercial motor vehicles, passenger-type vehicles in addition to air compressors, generators, and farm equipment. Services include part fabrication, installation of equipment, repair and maintenance work in the engine compartment, and tire and brake services. Work performed at the auto body shop includes painting and surface preparation which involves applying body filler and sanding. 8-hour time-weighted-average samples were collected for benzene and noise exposure and task-based samples were collected for lead dust work activities involving painted metal surfaces. Benzene samples were obtained using 3M™ 3520 sampling badges and were analyzed for additional volatile organic compounds. These compounds were selected based on material safety data sheet information for the aerosol products used by the mechanics for each day of sampling. The compounds included acetone, ethyl ether, toluene, xylene, VM&P naphtha, methyl ethyl ketone, and trichloroethylene. Laboratory data for benzene, VM&P naphtha, methyl ethyl ketone and trichloroethylene were all below the reporting detection limit. Airborne concentrations for acetone, ethyl ether, toluene and xylene were all less than 10% of their occupational exposure limit. The task-based samples obtained for lead dusts were submitted for a metal scan analysis to identify other metals that might be present. Laboratory results for lead dusts were all below the reporting detection limit and airborne concentration for the other metals observed in the samples were less than 10% of the occupational exposure limit. Noise dosimetry sampling was performed on a random basis and was representative of the different work activities within the four shops. Twenty three percent of the noise samples exceeded the occupational exposure limit of 85 decibels for an 8-hour time-weightedaverage. Work activities where noise levels were higher included use of impact wrenches and grinding wheels.

Sweeney, Lynn C.

2013-04-10T23:59:59.000Z

134

Welding and Repair Technology Center: Alternative Rules for Temperbead Qualification  

Science Conference Proceedings (OSTI)

Temperbead welding is common practice in the nuclear power industry for in situ repair of quenched and tempered low-alloy steels when post-weld heat treatment is impractical. The temperbead process controls the heat input so that the weld heat-affected zone in the low-alloy steel is tempered by the welding heat of subsequent layers. The tempering achieved in this way eliminates the need for post-weld heat treatment. Unfortunately, repair organizations in the nuclear power industry are ...

2012-09-28T23:59:59.000Z

135

EERE Postdoctoral Research Awards: How to Apply  

NLE Websites -- All DOE Office Websites (Extended Search)

How to Apply to someone by E-mail Share EERE Postdoctoral Research Awards: How to Apply on Facebook Tweet about EERE Postdoctoral Research Awards: How to Apply on Twitter Bookmark...

136

An engineering analysis of natural and biomimetic self-repair processes for solar energy harvesting  

E-Print Network (OSTI)

Plants have evolved highly sophisticated mechanisms of self-repair to regenerate proteins that become photo-damaged over time. Key to this self-repair process is the reversible self-assembly of protein complexes, which is ...

Boghossian, Ardemis A. (Ardemis Anoush)

2012-01-01T23:59:59.000Z

137

Weatherization and Intergovernmental Program: Apply for Weatherization  

NLE Websites -- All DOE Office Websites (Extended Search)

Apply Apply for Weatherization Assistance to someone by E-mail Share Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Facebook Tweet about Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Twitter Bookmark Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Google Bookmark Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Delicious Rank Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Digg Find More places to share Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on AddThis.com... Plans, Implementation, & Results Weatherization Assistance Program Weatherization Services

138

Vehicle Technologies Office: Applied Battery Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Battery Research Applied battery research addresses the barriers facing the lithium-ion systems that are closest to meeting the technical energy and power requirements for...

139

Microsoft Word - CX-IndianCabinRoadRepair_PPA1908_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

United States Government Department of Energy United States Government Department of Energy Bonneville Power Administration DATE: June 22, 2011 REPLY TO ATTN OF: KEP-4 SUBJECT: Environmental Clearance Memorandum Elizabeth Johnson Natural Resource Specialist - TFBV-THE DALLES Proposed Action: Indian Cabin Road Repair PP&A Project No.: 1908 Categorical Exclusions Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3, Routine maintenance activities...for structures, rights of way, infrastructures such as roads, equipment... routine maintenance activities, corrective....are required to maintain...infrastructures...in a condition suitable for a facility to be used for its designated purpose. Location: The project is located in Skamania County, Washington, T3N, R8E, Sections 27

140

Troubleshooting, Maintaining, and Repairing Personal Computers: A Technician's Guide  

Science Conference Proceedings (OSTI)

From the Publisher:Efficient, cost-effective troubleshooting and repair techniques in the ultimate hands-on reference for technicians. With this book and your technical skills, there is no computer problem you can't correct. You'll find nearly 400 problems ...

Stephen J. Bigelow

1995-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Charge transport-mediated recruitment of DNA repair enzymes  

E-Print Network (OSTI)

Damaged or mismatched bases in DNA can be repaired by Base Excision Repair (BER) enzymes that replace the defective base. Although the detailed molecular structures of many BER enzymes are known, how they colocalize to lesions remains unclear. One hypothesis involves charge transport (CT) along DNA [Yavin, {\\it et al.}, PNAS, {\\bf 102}, 3546, (2005)]. In this CT mechanism, electrons are released by recently adsorbed BER enzymes and travel along the DNA. The electrons can scatter (by heterogeneities along the DNA) back to the enzyme, destabilizing and knocking it off the DNA, or, they can be absorbed by nearby lesions and guanine radicals. We develop a stochastic model to describe the electron dynamics, and compute probabilities of electron capture by guanine radicals and repair enzymes. We also calculate first passage times of electron return, and ensemble-average these results over guanine radical distributions. Our statistical results provide the rules that enable us to perform implicit-electron Monte-Carlo simulations of repair enzyme binding and redistribution near lesions. When lesions are electron absorbing, we show that the CT mechanism suppresses wasteful buildup of enzymes along intact portions of the DNA, maximizing enzyme concentration near lesions.

Pak-Wing Fok; Chin-Lin Guo; Tom Chou

2008-11-18T23:59:59.000Z

142

Thermosetting Polymer-Matrix Composites for Strucutral Repair Applications  

Science Conference Proceedings (OSTI)

Several classes of thermosetting polymer matrix composites were evaluated for use in structural repair applications. Initial work involved the characterization and evaluation of woven carbon fiber/epoxy matrix composites for structural pipeline repair. Cyanate ester resins were evaluated as a replacement for epoxy in composites for high-temperature pipe repair applications, and as the basis for adhesives for resin infusion repair of high-temperature composite materials. Carbon fiber/cyanate ester matrix composites and fumed silica/cyanate ester nanocomposites were evaluated for their thermal, mechanical, viscoelastic, and rheological properties as they relate to their structure, chemistry, and processing characteristics. The bisphenol E cyanate ester under investigation possesses a high glass transition temperature, excellent mechanical properties, and unique ambient temperature processability. The incorporate of fumed silica served to enhance the mechanical and rheological properties of the polymer and reduce thermal expansion without sacrificing glass transition or drastically altering curing kinetics. Characterization of the composites included dynamic mechanical analysis, thermomechanical analysis, differential scanning calorimetry, thermogravimetric analysis, rheological and rheokinetic evaluation, and transmission electron microscopy.

William Kirby Goertzen

2007-12-01T23:59:59.000Z

143

SOLERAS - Analysis of photovoltaic concentrator module failures and repair methods  

Science Conference Proceedings (OSTI)

This report presents the results of the failure analysis, performed from early 1984 through September 1986 on the open-circuited modules, and the assessment of repairing these modules on site at the Solar Village. 16 refs., 26 figs., 19 tabs.

Huraib, F.S.; Imamura, M.S.; Salim, A.A.; Rao, N.R.

1987-06-01T23:59:59.000Z

144

Proceedings: Welding and Repair Technology for Power Plants: Second International Conference  

Science Conference Proceedings (OSTI)

The conference on welding and repair technology for power plants included presentations of case histories, emerging welding technologies, and demonstrated repair techniques and approaches. These proceedings provide technical information discussed at the conference on the repair of turbine rotors, disks, blades, piping, steam generators, headers, reactor pressure vessel internals, valves, pumps, and other components.

1997-04-04T23:59:59.000Z

145

Technical Repair Guidelines for Limitorque Gear Operator Models HBC 0-10  

Science Conference Proceedings (OSTI)

This technical repair guide (TRG) for Limitorque gear operator models HBC-0 through HBC-10 is the fourth in a series of documents devoted to the comprehensive maintenance and repair of Limitorque valve actuators. This guide provides instructions for engineering, operations, and maintenance personnel on the repair, maintenance, and operation of Limitorque HBC gear operators and their accessories.

1993-10-02T23:59:59.000Z

146

Description of Past Research: Fossil Materials and Repair (Program 87): 2012 Update  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute’s (EPRI’s) Fossil Materials and Repair Program (Program 87) within Major Component Reliability provides integrated materials selection guidance, information about repair technology, and corrosion mitigation methods to improve equipment performance, reliability, and profitability. The program has produced numerous material and repair guidelines and handbooks for application with steam boilers, steam ...

2013-04-12T23:59:59.000Z

147

Technical Repair Guidelines for Limitorque Models SMB 0 Through 4 Valve Actuators  

Science Conference Proceedings (OSTI)

This technical repair guide for Limitorque motor-operated valve (MOV) actuator models SMB 0 through 4 represents the third in a series of documents devoted to the comprehensive maintenance and repair of Limitorque actuators. This guide provides instructions for engineering, operations, and maintenance personnel on MOV actuator repair, maintenance, adjustment, and troubleshooting methods.

1993-02-28T23:59:59.000Z

148

Welding and Repair Technology for Power Plants: Fourth RRAC International Conference  

Science Conference Proceedings (OSTI)

The Fourth International Conference on Welding and Repair Technology for Power Plants included presentations of case histories and emerging welding technologies and demonstrations of repair techniques and approaches. These proceedings provide technical information discussed during this conference regarding the repair of steam turbine rotors, discs, blades, piping, steam generators, headers, reactor pressure vessel internals, valves, pumps, combustion turbines, and other components. Sessions included nucl...

2000-09-30T23:59:59.000Z

149

Repair welding of fusion reactor components  

SciTech Connect

Experiments have shown that irradiated Type 316 stainless steel is susceptible to heat-affected-zone (HAZ) cracking upon cooling when welded using the gas tungsten arc (GTA) process under lateral constraint. The cracking has been hypothesized to be caused by stress-assisted helium bubble growth and rupture at grain boundaries. This study utilized an experimental welding setup which enabled different compressive stresses to be applied to the plates during welding. Autogenous GTA welds were produced in Type 316 stainless steel doped with 256 appm helium. The application of a compressive stress, 55 MPa, during welding suppressed the previously observed catastrophic cracking. Detailed examinations conducted after welding showed a dramatic change in helium bubble morphology. Grain boundary bubble growth along directions parallel to the weld was suppressed. Results suggest that stress-modified welding techniques may be used to suppress or eliminate helium-induced cracking during joining of irradiated materials.

Chin, B.A.

1993-05-15T23:59:59.000Z

150

DARPA Learning Applied to Ground Robots (LAGR)  

Science Conference Proceedings (OSTI)

DARPA Learning Applied to Ground Robots (LAGR) Project (Concluded). Summary: The National Institute of Standards ...

2012-01-04T23:59:59.000Z

151

Valve Application, Maintenance, and Repair Guide: In Situ State-of-the-Art Valve Welding Repair (Gate, Globe, & Check Valves), Volum e 2  

Science Conference Proceedings (OSTI)

The Valve Application, Maintenance and Repair Guide is a three volume series that provides a generic overview of valve application selection, maintenance, and repair. Volume 2 of this series is a comprehensive guide for in situ weld repair of gate, globe, and check valve components such as bodies, bonnets, discs, and seats. The information in this guide, though directed toward nuclear plant personnel, will assist all power plant engineers, planners, and maintenance personnel responsible for valve mainten...

1996-12-31T23:59:59.000Z

152

Categorical Exclusion Determinations: Savannah River Operations Office |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 27, 2012 June 27, 2012 CX-008614: Categorical Exclusion Determination Repair Culvert on Road 3 CX(s) Applied: B1.3 Date: 06/27/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office June 27, 2012 CX-008613: Categorical Exclusion Determination Replace Awning, Building 735-A CX(s) Applied: B1.3 Date: 06/27/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office June 26, 2012 CX-008618: Categorical Exclusion Determination Evaluation of Sorbent/Ion Exchangers for Radiochemical and Metal Separations CX(s) Applied: B3.6 Date: 06/26/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office June 26, 2012 CX-008617: Categorical Exclusion Determination Savannah River National Laboratory Building 735-13A Power Addition CX(s) Applied: B1.15

153

Categorical Exclusion Determinations: South Carolina | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 7, 2012 December 7, 2012 CX-009604: Categorical Exclusion Determination 704-56H Sanitary Sewer Upgrade CX(s) Applied: B1.3 Date: 12/07/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office December 7, 2012 CX-009603: Categorical Exclusion Determination 716-N Yard Sinkhole Repair CX(s) Applied: B1.3 Date: 12/07/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office December 7, 2012 CX-009602: Categorical Exclusion Determination 735-A, D-112, -113, and -114 Laboratory Renovations CX(s) Applied: B2.5 Date: 12/07/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office December 7, 2012 CX-009601: Categorical Exclusion Determination Installation of a High Flux Thermal Neutron Source CX(s) Applied: B2.5 Date: 12/07/2012

154

Categorical Exclusion Determinations: South Carolina | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3, 2012 3, 2012 CX-009085: Categorical Exclusion Determination High Activity Waste Tank (HAWT) Disposition CX(s) Applied: B3.1 Date: 07/03/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office June 27, 2012 CX-008614: Categorical Exclusion Determination Repair Culvert on Road 3 CX(s) Applied: B1.3 Date: 06/27/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office June 27, 2012 CX-008613: Categorical Exclusion Determination Replace Awning, Building 735-A CX(s) Applied: B1.3 Date: 06/27/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office June 26, 2012 CX-008618: Categorical Exclusion Determination Evaluation of Sorbent/Ion Exchangers for Radiochemical and Metal Separations CX(s) Applied: B3.6 Date: 06/26/2012

155

Oxidation Kinetics Modeling Applying Phase Field Approach  

Science Conference Proceedings (OSTI)

Presentation Title, Oxidation Kinetics Modeling Applying Phase Field Approach ... chemical reaction rates will increase exponentially and environmental attack ...

156

Applied Chemicals and Materials Staff Directory  

Science Conference Proceedings (OSTI)

Applied Chemicals and Materials Staff Directory. ... accept either a name, organizational name, or ... MML Organization. Contact. Material Measurement ...

2012-10-12T23:59:59.000Z

157

Researcher, Los Alamos National Laboratory - Applied Physics...  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Physics Division | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response...

158

Solar Cells, Wound Repair Winning GVC Technologies | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Solar Cells, Wound Repair Winning GVC Technologies Solar Cells, Wound Repair Winning GVC Technologies March 26, 2010 Graduate student teams from the University of Arkansas and the University of Maryland earned first place in the energy and security categories at the 2010 GVC hosted by ORNL March 24-26. The competition, in its fourth year, attracts students developing new technologies and venture investors with expertise in the market. The first-prize winners each received $25,000. Douglas Hutchings, Stephen Ritterbush, and Seth Shumate from Arkansas won first place in the energy division for Silicon Solar Solutions. "Our method replaces the expensive top layer of solar cells with a thinner, large-grain polysilicon at lower temperatures, which reduces cost and is appealing to manufacturers," said Ritterbush.

159

CHEMICAL ENGINEERING SCHOOL OF ENGINEERING & APPLIED SCIENCE  

E-Print Network (OSTI)

30 CHEMICAL ENGINEERING SCHOOL OF ENGINEERING & APPLIED SCIENCE MIAMI UNIVERSITY 2005-2006 The program leads to the degree, Bachelor of Science in Applied Science, with a major in Chemical Engineering The chemical engineering students learn to apply the concepts of chemistry, biochemistry and biological science

Dollar, Anna

160

Repair and Replacement Applications Center Joint Welding Procedure Qualification Program  

Science Conference Proceedings (OSTI)

At the request of the EPRI Repair and Replacement Applications Center subscribers, a Joint Welding Procedure Qualification Program was developed to provide a medium whereby multiple utilities can share in the qualification of specific welding procedures. The program was developed in such a manner that it will supplement existing utility welding qualification programs. Specifically the program incorporates the more stringent attributes of each utility's internal welding program while meeting the individua...

1997-11-12T23:59:59.000Z

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Development of Methods to Repair Header Stub Tube Bends  

Science Conference Proceedings (OSTI)

Repair of flow-accelerated corrosion damage in bent header stub tubes in heat recovery steam generators (HRSGs) is normally accomplished by spreading tubing pendants to gain access, cutting your way in and welding your way out, or plugging damaged tubing. The technology described in this report is being developed to enable the replacement of damaged tubing in a method that will dramatically reduce change-out time in the event of a failure.

2008-12-23T23:59:59.000Z

162

HRSG Repair Welding Technologies to Address FAC in Tube Bends  

Science Conference Proceedings (OSTI)

Tube failures that occur in heat recovery steam generators (HRSGs) are often caused by thermal stress or thermal shock associated with cyclic plant operation or by flow-accelerated corrosion. Many premature failures occur along the length of finned tubes or at attachment locations where tubes are joined to the upper or lower header. Because of current tube repair practices and limited access for welding, reoccurring failures are common.

2008-03-20T23:59:59.000Z

163

Repair Welding Technologies For Heat Recovery Steam Generators  

Science Conference Proceedings (OSTI)

Tube failures that occur in heat recovery steam generators (HRSGs) are often caused by thermal stress or thermal shock associated with cyclic plant operation or by flow-accelerated corrosion. Many premature failures occur along the length of finned tubes or at attachment locations where tubes are joined to the upper or lower header. Because of current tube repair practices and limited access for welding, reoccurring failures are common.

2005-12-21T23:59:59.000Z

164

In Situ Temporary Repair of Thermal Barrier Coatings  

Science Conference Proceedings (OSTI)

The durability of thermal barrier coatings (TBCs) on combustion turbine blades and vanes is a critical issue in the power generation industry. Degradation of TBCs occur by the spallation of the ceramic layer — partially stabilized zirconia (PSZ) — that resides on the Al2O3-covered MCrAlY bondcoat. In the event of such local failures of the TBC, a quick in-situ technique to repair the coating would be desirable.

2005-03-31T23:59:59.000Z

165

Categorical Exclusion Determinations: B1.3 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 20, 2013 June 20, 2013 CX-010551: Categorical Exclusion Determination Alcova-Miracle Mile East 115 Kilovolt Transmission Line Structure Replace and Road Maintenance, Carbon and Natrona Counties, Wyoming CX(s) Applied: B1.3 Date: 06/20/2013 Location(s): Wyoming, Wyoming Offices(s): Western Area Power Administration-Rocky Mountain Region June 20, 2013 CX-010655: Categorical Exclusion Determination Roof Repair on Crane Maintenance Area Roof CX(s) Applied: B1.3 Date: 06/20/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office June 18, 2013 CX-010656: Categorical Exclusion Determination Stormwater Drainage Repair CX(s) Applied: B1.3 Date: 06/18/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office June 17, 2013 CX-010662: Categorical Exclusion Determination

166

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

51 - 20360 of 26,764 results. 51 - 20360 of 26,764 results. Download CX-006723: Categorical Exclusion Determination Repair Flowline 77-S-10 CX(s) Applied: B2.5, B5.2, B5.4 Date: 03/12/2010 Location(s): Casper, Wyoming Office(s): RMOTC http://energy.gov/nepa/downloads/cx-006723-categorical-exclusion-determination Download CX-006722: Categorical Exclusion Determination Repair Flowline 61-66-SX-3 CX(s) Applied: B5.2, B5.4 Date: 03/16/2010 Location(s): Casper, Wyoming Office(s): RMOTC http://energy.gov/nepa/downloads/cx-006722-categorical-exclusion-determination Download CX-006700: Categorical Exclusion Determination Geothermal Technologies Program CX(s) Applied: B5.1 Date: 11/18/2010 Location(s): Casper, Wyoming Office(s): RMOTC http://energy.gov/nepa/downloads/cx-006700-categorical-exclusion-determination

167

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3, 2012 3, 2012 CX-008950: Categorical Exclusion Determination Pilot Testing: Pretreatment Options to Allow Re-Use of Frac Flowback Water CX(s) Applied: B3.6 Date: 08/13/2012 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory August 13, 2012 CX-008949: Categorical Exclusion Determination Novel Materials for Robust Repair of Leaky Wellbores in Carbon Dioxide Storage Formations CX(s) Applied: A9, B3.6 Date: 08/13/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory August 13, 2012 CX-008884: Categorical Exclusion Determination Rattlesnake Butte Property Funding CX(s) Applied: B1.25 Date: 08/13/2012 Location(s): Oregon Offices(s): Bonneville Power Administration August 13, 2012 CX-008879: Categorical Exclusion Determination Pearl-Marion No.1 Line Tower 21/1 Bank Repair Project

168

Categorical Exclusion Determinations: Environmental Management | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 18, 2010 March 18, 2010 CX-001366: Categorical Exclusion Determination Repair Roof Leaks in L Reactor Building CX(s) Applied: B1.3 Date: 03/18/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office March 18, 2010 CX-001365: Categorical Exclusion Determination Repair Domestic Water Line Near Entrance to 717-F CX(s) Applied: B1.3 Date: 03/18/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office March 16, 2010 CX-001371: Categorical Exclusion Determination Synthetic Concentrators CX(s) Applied: B3.6 Date: 03/16/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office March 16, 2010 CX-001370: Categorical Exclusion Determination

169

Categorical Exclusion Determinations: National Energy Technology Laboratory  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

30, 2010 30, 2010 CX-004106: Categorical Exclusion Determination Green Oil: Carbon Dioxide Enhanced Oil Recovery for America?s Small Oil Producers CX(s) Applied: A9 Date: 09/30/2010 Location(s): Socorro, New Mexico Office(s): Fossil Energy, National Energy Technology Laboratory September 30, 2010 CX-004105: Categorical Exclusion Determination High Resolution Three-Dimensional Laser Imaging for Inspection, Maintenance, Repair and Operations CX(s) Applied: B3.6 Date: 09/30/2010 Location(s): Houston, Texas Office(s): Fossil Energy, National Energy Technology Laboratory September 30, 2010 CX-004100: Categorical Exclusion Determination High Resolution Three-Dimensional Laser Imaging for Inspection, Maintenance, Repair and Operations CX(s) Applied: B3.6 Date: 09/30/2010 Location(s): Boulder, Colorado

170

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

30, 2010 30, 2010 CX-004105: Categorical Exclusion Determination High Resolution Three-Dimensional Laser Imaging for Inspection, Maintenance, Repair and Operations CX(s) Applied: B3.6 Date: 09/30/2010 Location(s): Houston, Texas Office(s): Fossil Energy, National Energy Technology Laboratory September 30, 2010 CX-004100: Categorical Exclusion Determination High Resolution Three-Dimensional Laser Imaging for Inspection, Maintenance, Repair and Operations CX(s) Applied: B3.6 Date: 09/30/2010 Location(s): Boulder, Colorado Office(s): Fossil Energy, National Energy Technology Laboratory September 30, 2010 CX-004099: Categorical Exclusion Determination Advanced Energy Efficient Building Technologies for High Performance Hospitals CX(s) Applied: A9 Date: 09/30/2010 Location(s): Eugene, Oregon

171

One "Cool Tool" That's Helping Repair Your DNA | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

"Cool Tool" That's Helping Repair Your DNA "Cool Tool" That's Helping Repair Your DNA One "Cool Tool" That's Helping Repair Your DNA April 18, 2011 - 1:20pm Addthis Charles Rousseaux Charles Rousseaux Senior Writer, Office of Science What are the key facts? Berkeley Lab's Advanced Light Source produces x-ray light that shines a billion times bright than the sun. Scientists discovered the motor that drives the actual repair of the DNA repair machine called MRN, which is tethered to the rest of the machine in a fairly flexible fashion. Further insight into MRN and other DNA repair machines may also give scientists new insights into fighting some cancers as well as other diseases such as cystic fibrosis. With the arrival of spring, many families are dusting off their tools to make some home improvements. It's worth remembering that nature also has

172

Fundamental & Applied Bioenergy | Clean Energy | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

a new generation of efficient bioenergy strategies that will reduce U.S. dependence on foreign oil and help curb carbon emissions. Fundamental and applied bioenergy research at...

173

Applied Control Strategies at a Cogeneration Plant.  

E-Print Network (OSTI)

?? The purpose of this paper is to demonstrate the effectiveness of “classical strategies for dynamic control” on authentic cogeneration processes. These strategies are applied… (more)

Burns, Joseph William

2011-01-01T23:59:59.000Z

174

Applied Quantum Technology AQT | Open Energy Information  

Open Energy Info (EERE)

AQT Jump to: navigation, search Name Applied Quantum Technology (AQT) Place Santa Clara, California Zip 95054 Product California-based manufacturer of CIGS (copper indium gallium...

175

Combustion Turbine Repair Guidelines: Siemens V84.3A (SGT6-4000F)  

Science Conference Proceedings (OSTI)

For more than a decade, the Electric Power Research Institute (EPRI) has been developing gas turbine hot section component repair and coating guidelines to assist utilities in the refurbishment of these critical and expensive parts. Utilities, generators, and repair vendors have used these guidelines to perform repairs on blades, turbine vanes, and combustion hardware. Guidelines now exist for a variety of conventional and advanced General Electric, Siemens/Westinghouse, Alstom, and Mitsubishi heavy fram...

2010-01-27T23:59:59.000Z

176

Technical Repair Guidelines for Limitorque Model SMB-000 Valve Actuators: Revision 1  

Science Conference Proceedings (OSTI)

This technical repair guide (TRG) for Limitorque motor-operated valve (MOV) actuator model SMB-000 is the first in a series of documents devoted to the comprehensive maintenance and repair of Limitorque actuators. This guide provides instructions for engineering, operations, and maintenance personnel on MOV actuator repair, maintenance, adjustment, and troubleshooting methods. Originally published in 1989, this document has now been thoroughly revised (Revision 1) to incorporate new information and techn...

1994-10-02T23:59:59.000Z

177

Development of Laser Weld Repair, Cladding, and Heat Treatment Technology for Alloy 600 RPV Penetrations  

Science Conference Proceedings (OSTI)

EPRI has developed innovative laser weld repair technology for Alloy 600 reactor pressure vessel (RPV) head penetrations in pressure water reactors (PWRs). The repair technology consists of an Nd:YAG laser, fiber optic delivery system, optical assembly (weld head), welding filler metal feed system, and manipulator. The laser system will be used to address the repair of axially oriented cracks, stress relief, and cladding operations.

1998-06-29T23:59:59.000Z

178

Conference Proceedings: EPRI-RRAC Fifth International Conference on Welding and Repair Technology for Power Plants  

Science Conference Proceedings (OSTI)

The 2002 Fifth International Conference on Welding and Repair Technology for Power Plants included presentations of case histories, emerging welding technologies, and demonstrated repair techniques and approaches. These proceedings provide technical information discussed during this conference on the repair of steam turbine rotors, disks, blades, piping, steam generators, headers, reactor pressure vessel internals, valves, pumps, combustion turbines, and other components. Sessions include nuclear and fos...

2002-10-17T23:59:59.000Z

179

CX-010634: Categorical Exclusion Determination  

Energy.gov (U.S. Department of Energy (DOE))

Creation of Li-Ion Battery Test Labs, Customer Return Repair Center & End of Life Battery - Task 8 CX(s) Applied: B3.6 Date: 07/03/2013 Location(s): Michigan Offices(s): National Energy Technology Laboratory

180

Note: A Graph-Theoretical Approach to Level of Repair Analysis  

E-Print Network (OSTI)

Aug 29, 2004... of repair and maintenance facilities to minimize overall life-cycle costs. ... Category 2: Applications -- OR and Management Sciences ...

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Improving Repair Quality of Turbine Nozzles Using SA650 Braze Alloy  

Science Conference Proceedings (OSTI)

improved repairs for key gas turbine components. Airfoil components of High Pressure and Low. Pressure turbines (HPT and LPT) are subject to wear and ...

182

Note: A Graph-Theoretical Approach to Level of Repair Analysis  

E-Print Network (OSTI)

Aug 29, 2004 ... Acquisition Management System at www.ams.mod.uk/ams). ... LORA seeks to determine an optimal provision of repair and maintenance.

183

A sociotechnical framework for understanding infrastructure breakdown and repair  

SciTech Connect

This paper looks at how and why infrastructure is repaired. With a new era of infrastructure spending underway, policymakers need to understand and anticipate the particular technical and political challenges posed by infrastructure repair. In particular, as infrastructure problems are increasingly in the public eye with current economic stimulus efforts, the question has increasingly been asked: why has it been so difficult for the United Statesto devote sustained resources to maintaining and upgrading its national infrastructure? This paper provides a sociotechnical framework for understanding the challenges of infrastructure repair, and demonstrates this framework using a case study of seismic retrofit of freeway bridges in California. The design of infrastructure is quite different from other types of design work even when new infrastructure is being designed. Infrastructure projects are almost always situated within, and must work with, existing infrastructure networks. As a result, compared to design of more discrete technological artifacts, the design of infrastructure systems requires a great deal of attention to interfaces as well as adaptation of design to the constraints imposed by existing systems. Also, because of their scale, infrastructural technologies engage with social life at a level where explicit political agendas may playa central role in the design process. The design and building of infrastructure is therefore often an enormously complex feat of sociotechnical engineering, in which technical and political agendas are negotiated together until an outcome is reached that allows the project to move forward. These sociotechnical settlements often result in a complex balancing of powerful interests around infrastructural artifacts; at the same time, less powerful interests have historically often been excluded or marginalized from such settlements.

Sims, Benjamin H [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

184

Applied technology section. Monthly report, March 1994  

Science Conference Proceedings (OSTI)

This is a monthly report giving the details on research currently being conducted at the Savannah River Technology Center. The following are areas of the research, engineering modeling and simulation, applied statistics, applied physics,experimental thermal hydraulics,and packaging and transportation.

Buckner, M.R.

1994-04-20T23:59:59.000Z

185

DRAFT GUIDANCE Applying for Other Uses of  

E-Print Network (OSTI)

DRAFT GUIDANCE Applying for Other Uses of Phosphogypsum: Submitting a Complete Petition 40 CFR 61 Assignment 0-2 #12;Applying for Other Uses of Phosphogypsum: Submitting a Complete Petition Table of Contents phosphogypsum in stacks? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.4. What

186

Blade reliability collaborative : collection of defect, damage and repair data.  

SciTech Connect

The Blade Reliability Collaborative (BRC) was started by the Wind Energy Technologies Department of Sandia National Laboratories and DOE in 2010 with the goal of gaining insight into planned and unplanned O&M issues associated with wind turbine blades. A significant part of BRC is the Blade Defect, Damage and Repair Survey task, which will gather data from blade manufacturers, service companies, operators and prior studies to determine details about the largest sources of blade unreliability. This report summarizes the initial findings from this work.

Ashwill, Thomas D.; Ogilvie, Alistair B.; Paquette, Joshua A.

2013-04-01T23:59:59.000Z

187

Applied Materials Inc AMAT | Open Energy Information  

Open Energy Info (EERE)

Inc AMAT Inc AMAT Jump to: navigation, search Name Applied Materials Inc (AMAT) Place Santa Clara, California Zip 95052-8039 Sector Solar Product US-based manufacturer of equipment used in solar (silicon, thin-film, BIPV), semiconductor, and LCD markets. References Applied Materials Inc (AMAT)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Applied Materials Inc (AMAT) is a company located in Santa Clara, California . References ↑ "Applied Materials Inc (AMAT)" Retrieved from "http://en.openei.org/w/index.php?title=Applied_Materials_Inc_AMAT&oldid=342244" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes

188

Applied Materials Wind Turbine | Open Energy Information  

Open Energy Info (EERE)

Wind Turbine Wind Turbine Jump to: navigation, search Name Applied Materials Wind Turbine Facility Applied Materials Sector Wind energy Facility Type Community Wind Facility Status In Service Owner Applied Materials Developer Applied Materials Energy Purchaser Applied Materials Location Gloucester MA Coordinates 42.62895426°, -70.65153122° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.62895426,"lon":-70.65153122,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

189

Applying System Engineering to Pharmaceutical Safety  

E-Print Network (OSTI)

While engineering techniques are used in the development of medical devices and have been applied to individual healthcare processes, such as the use of checklists in surgery and ICUs, the application of system engineering ...

Couturier, Matthieu

190

Applied Information Security, 1st edition  

Science Conference Proceedings (OSTI)

Applied Information Security guides readers through the installation and basic operation of IT Security software used in the industry today. Dos Commands; Password Auditors; Data Recovery & Secure Deletion; Packet Sniffer; Port Scanners; Vulnerability ...

Randy Boyle

2009-07-01T23:59:59.000Z

191

Baldrige FAQs: Applying for the Award  

Science Conference Proceedings (OSTI)

... often use their feedback reports in their strategic planning processes to focus ... How long does it take to apply for the ... How long will it take to do a self ...

2013-05-21T23:59:59.000Z

192

Applied Field Research Initiative Deep Vadose Zone  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Applied Field Research Initiative Applied Field Research Initiative Deep Vadose Zone Located on the Hanford Site in Richland, Washington, the Deep Vadose Zone Applied Field Research Initiative (DVZ AFRI) was established to protect water resources by addressing the challenge of preventing contamination in the deep vadose zone from reaching groundwater. Led by the Pacific Northwest National Laboratory, the Initiative is a collaborative effort that leverages Department of Energy (DOE) investments in basic science and applied research and the work of site contractors to address the complex deep vadose zone contamination challenges. Challenge Many vadose zone environments within the DOE complex consist of complex stratified layers of unconsolidated and water-unsaturated sediments that are, in many places, con-

193

Applied Virtual Intelligence in Oil & Gas Industry;  

E-Print Network (OSTI)

1 Applied Virtual Intelligence in Oil & Gas Industry; Past, Present, & Future Shahab D. Mohaghegh on a daily basis by almost everyone. Credit Card Fraud Detection Bank Loan Approval Bomb Sniffing Devices

Mohaghegh, Shahab

194

1999 Gordon Research Conference on Mammalian DNA Repair. Final Progress Report  

SciTech Connect

This Conference will examine DNA repair as the key component in genomic surveillance that is so crucial to the overall integrity and function of mammalian cells. Recent discoveries have catapulted the field of DNA repair into a pivotal position for fundamental investigations into oncology, aging, environmental health, and developmental biology. We hope to highlight the most promising and exciting avenues of research in robust discussions at this conference. This Mammalian DNA Repair Gordon Conference differs from the past conferences in this series, in which the programs were broader in scope, with respect to topics and biological systems covered. A conference sponsored by the Genetics Society in April 1998 emphasized recombinational mechanisms for double-strand break repair and the role of mismatch repair deficiency in colorectal cancer. These topics will therefore receive somewhat less emphasis in the upcoming Conference. In view of the recent mechanistic advances in mammalian DNA repair, an upcoming comprehensive DNA repair meeting next autumn at Hilton Head; and the limited enrollment for Gordon Conferences we have decided to focus session-by-session on particular areas of controversy and/or new developments specifically in mammalian systems. Thus, the principal presentations will draw upon results from other cellular systems only to the extent that they impact our understanding of mammalian DNA repair.

1999-02-12T23:59:59.000Z

195

A Systematic Stochastic Petri Net Based Methodology for Transformer Fault Diagnosis and Repair Actions  

Science Conference Proceedings (OSTI)

Transformer fault diagnosis and repair is a complex task that includes many possible types of faults and demands special trained personnel. Moreover, the minimization of the time needed for transformer fault diagnosis and repair is an important task ... Keywords: power system reliability, stochastic petri nets, transformer fault diagnosis

P. S. Georgilakis; J. A. Katsigiannis; K. P. Valavanis; A. T. Souflaris

2006-02-01T23:59:59.000Z

196

Change-point detection in failure intensity: A case study with repairable artillery systems  

Science Conference Proceedings (OSTI)

Repairable systems can experience unexpected environmental changes over long operational periods. Such changes affect the incidence of failures, causing different system failure patterns before and after the changes. In this article, we propose an informational ... Keywords: Change-point, Homogeneous Poisson process, Modified information criterion, Repairable system, Schwarz information criterion, Statistical trend test

Suk Joo Bae; Byeong Min Mun; Kyung Yong Kim

2013-01-01T23:59:59.000Z

197

Manual of Bearing Failures and Repair in Power Plant Rotating Equipment  

Science Conference Proceedings (OSTI)

Bearing failures are a leading cause of unavailability for power plant rotating machinery, often resulting in prolonged forced outages and costly repairs. This manual, which assists utilities in identifying bearing failure modes and selecting remedial actions to prevent future failures, provides guidelines for repair techniques.

1991-08-08T23:59:59.000Z

198

Repair Technology for Degraded Pressure Vessel and Heat Exchanger Shells: RRAC Task 91  

Science Conference Proceedings (OSTI)

The ability to repair pressure vessels and heat exchangers offers utilities significant cost savings compared to replacing these components. This is especially the case if outage time and loss of production are factored into the cost of replacement. This guide provides a review of various current and proposed repair methods that can be used for pressure vessel and heat exchanger applications.

2002-12-02T23:59:59.000Z

199

State-of-the-Art Weld Repair Technology for Rotating Components  

Science Conference Proceedings (OSTI)

Deregulation of the power industry, increased competition, enhanced environmental regulations, and aging or degraded equipment continue to place greater economic pressures on utilities. Weld repair of rotors and discs offers a viable means of extending the life of in-service rotors and discs. This report provides comprehensive repair guidelines for utilities.

1997-07-30T23:59:59.000Z

200

A generalized linear-quadratic model incorporating reciprocal time pattern of radiation damage repair  

Science Conference Proceedings (OSTI)

Purpose: It has been conventionally assumed that the repair rate for sublethal damage (SLD) remains constant during the entire radiation course. However, increasing evidence from animal studies suggest that this may not the case. Rather, it appears that the repair rate for radiation-induced SLD slows down with increasing time. Such a slowdown in repair would suggest that the exponential repair pattern would not necessarily accurately predict repair process. As a result, the purpose of this study was to investigate a new generalized linear-quadratic (LQ) model incorporating a repair pattern with reciprocal time. The new formulas were tested with published experimental data. Methods: The LQ model has been widely used in radiation therapy, and the parameter G in the surviving fraction represents the repair process of sublethal damage with T{sub r} as the repair half-time. When a reciprocal pattern of repair process was adopted, a closed form of G was derived analytically for arbitrary radiation schemes. The published animal data adopted to test the reciprocal formulas. Results: A generalized LQ model to describe the repair process in a reciprocal pattern was obtained. Subsequently, formulas for special cases were derived from this general form. The reciprocal model showed a better fit to the animal data than the exponential model, particularly for the ED50 data (reduced {chi}{sup 2}{sub min} of 2.0 vs 4.3, p = 0.11 vs 0.006), with the following gLQ parameters: {alpha}/{beta} = 2.6-4.8 Gy, T{sub r} = 3.2-3.9 h for rat feet skin, and {alpha}/{beta} = 0.9 Gy, T{sub r} = 1.1 h for rat spinal cord. Conclusions: These results of repair process following a reciprocal time suggest that the generalized LQ model incorporating the reciprocal time of sublethal damage repair shows a better fit than the exponential repair model. These formulas can be used to analyze the experimental and clinical data, where a slowing-down repair process appears during the course of radiation therapy.

Huang, Zhibin; Mayr, Nina A.; Lo, Simon S.; Wang, Jian Z.; Jia Guang; Yuh, William T. C.; Johnke, Roberta [Department of Radiation Oncology, East Carolina University, Greenville, North Carolina 27834 (United States); Department of Radiation Oncology, Ohio State University, Columbus, Ohio 43210 (United States); Department of Radiation Oncology, University Hospitals Case Medical Center, Case Western Reserve University, Cleveland, Ohio 44106 (United States); Department of Radiation Oncology, Ohio State University, Columbus, Ohio 43210 (United States); Department of Radiology, Ohio State University, Columbus, Ohio 43210 (United States); Department of Radiation Oncology, East Carolina University, Greenville, North Carolina, 27834 (United States)

2012-01-15T23:59:59.000Z

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

www.mdpi.com/journal/ijms Chromatin Dynamics during Nucleotide Excision Repair: Histones on the Move  

E-Print Network (OSTI)

Abstract: It has been a long-standing question how DNA damage repair proceeds in a nuclear environment where DNA is packaged into chromatin. Several decades of analysis combining in vitro and in vivo studies in various model organisms ranging from yeast to human have markedly increased our understanding of the mechanisms underlying chromatin disorganization upon damage detection and re-assembly after repair. Here, we review the methods that have been developed over the years to delineate chromatin alterations in response to DNA damage by focusing on the well-characterized Nucleotide Excision Repair (NER) pathway. We also highlight how these methods have provided key mechanistic insight into histone dynamics coupled to repair in mammals, raising new issues about the maintenance of chromatin integrity. In particular, we discuss how NER factors and central players in chromatin dynamics such as histone modifiers, nucleosome remodeling factors, and histone chaperones function to mobilize histones during repair.

Salomé Adam; Sophie E. Polo

2012-01-01T23:59:59.000Z

202

Health physics support for thermal shield repair at Connecticut Yankee  

Science Conference Proceedings (OSTI)

This article describes the radiation and safety controls used by Connecticut Yankee Atomic Power Company to support underwater repair work on the Haddam Neck Plant's core barrel thermal shield. The work was conducted by divers in the reactor cavity using remote tools and protected by a specially-constructed physical barrier that restricted their movements to a carefully defined and thoroughly surveyed area. A unique dosimetry test rig was used to determine the dose rate profiles within the work areas, and all underwater survey equipment was qualified against personnel dosimetric devices. Underwater operations were monitored and controlled by remote means (video surveillance and dosimetry telemetry), and health physics technicians were rotated through job coverage to avoid complacency and maximize training opportunities. A single, hot particle event occurred during one dive, but this was identified almost immediately and controlled to prevent excessive exposure to the diver.

Nevelos, W.F.; Gates, W.J. (Connecticut Yankee Atomic Power Co., East Hampton, CT (United States))

1988-10-01T23:59:59.000Z

203

Interfacial instability and DNA fork reversal by repair proteins  

E-Print Network (OSTI)

A repair protein like RecG moves the stalled replication fork in the direction from the zipped to the unzipped state of DNA. It is proposed here that a softening of the zipped-unzipped interface at the fork results in the front propagating towards the unzipped side. In this scenario, an ordinary helicase destabilizes the zipped state locally near the interface and the fork propagates towards the zipped side. The softening of the interface can be produced by the aromatic interaction, predicted from crystal structure, between RecG and the nascent broken base pairs at the Y-fork. A numerical analysis of the model also reveals the possibility of a stop and go type motion.

Somendra M. Bhattacharjee

2009-09-03T23:59:59.000Z

204

Removal of Dioxin Contamination for Gas Turbine Generator Set Repair  

SciTech Connect

Decontamination projects are typically undertaken in the interest of reducing disposal costs. This goal can be achieved because decontamination concentrates the contaminant into a smaller volume or changes its form so that a lower cost disposal technology becomes available. Less frequently, decontamination adds value back to the fouled structure or contaminated piece of equipment. This removal of dioxins from a gas turbine generator set is one of the latter cases. A multi-million dollar piece of equipment could have been destined for the scrap pile. Instead, an innovative, non-destructive decontamination technology, developed under EPA and DOE demonstration programs has was employed so that the set could repaired and put back into service. The TechXtractchemical decontamination technology reduced surface dioxin / furan concentrations from as high as 24,000 ng / m2 to less than 25 ng / m2 and below detection limits.

Fay, W. S.; Borah, R.E.

2003-02-25T23:59:59.000Z

205

How to Apply | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

How to Apply How to Apply How to Apply Awards are made through a formal process that has changed dramatically since 2011. So let us walk you through it step by step. "Innovation pays." - John Kao, Innovation Nation Submit a Letter of Intent On October 28, 2013, the U.S. Department of Energy (DOE) announced on the DOE SBIR website a preview version of the technical topics for which it will later accept funding applications. These topics will be found on the DOE's Funding Opportunity Announcements page. The EE SBIR page lists those topics that are cleantech (specific to EERE). We also recommend that you sign up for the EE-SBIR and DOE-SBIR mailing lists. The EE SBIR mailing list signup is at https://public.govdelivery.com/accounts/USEERE/subscriber/new?topic_id=USEERE_442.

206

Applied Field Research Initiative Attenuation Based Remedies  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PA00133 - March 2011 PA00133 - March 2011 Applied Field Research Initiative Attenuation Based Remedies in the Subsurface Located at the Savannah River Site in Aiken, South Carolina, the Attenuation-Based Remedies in the Subsurface Applied Field Research Initiative (ABRS AFRI) was established to develop the tools, approaches and technologies that will be required to address the technical challenges associated characteriza- tion, remediation and long-term monitoring of recalcitrant compounds in the subsurface at Department of Energy (DOE) Environmental Management (EM) sites. The ABRS AFRI site provides a unique setting for researchers in both applied and basic science fields. A wealth of subsurface data is available to support research activities and remedial decision making.

207

Applied Process Engineering Laboratory | Open Energy Information  

Open Energy Info (EERE)

Applied Process Engineering Laboratory Applied Process Engineering Laboratory Name Applied Process Engineering Laboratory Address 350 Hills Street, Suite #101 Place Richland, Washington Zip 99354 Region Pacific Northwest Area Coordinates 46.3389754°, -119.2716263° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":46.3389754,"lon":-119.2716263,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

208

Modeling International Relationships in Applied General Equilibrium  

Open Energy Info (EERE)

Modeling International Relationships in Applied General Equilibrium Modeling International Relationships in Applied General Equilibrium (MIRAGE) Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: Modeling International Relationships in Applied General Equilibrium (MIRAGE) Agency/Company /Organization: International Food Policy Research Institute, Centre d'Etudes Prospectives et d'Informations Internationales (CEPII) Focus Area: Economic Development Topics: Co-benefits assessment, - Macroeconomic Resource Type: Software/modeling tools User Interface: Desktop Application Complexity/Ease of Use: Moderate Website: www.ifpri.org/book-5076/ourwork/program/mirage-model RelatedTo: Global Trade Analysis Project (GTAP) Data Base

209

Applied Ventures LLC | Open Energy Information  

Open Energy Info (EERE)

Applied Ventures LLC Applied Ventures LLC Name Applied Ventures LLC Address 3050 Bowers Avenue Place Santa Clara, California Zip 95054 Region Southern CA Area Product Venture capital. Number of employees 1-10 Phone number (408) 727-5555 Website http://www.appliedventures.com Coordinates 37.37751°, -121.978721° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.37751,"lon":-121.978721,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

210

Development and validation of bonded composite doubler repairs for commercial aircraft.  

Science Conference Proceedings (OSTI)

A typical aircraft can experience over 2,000 fatigue cycles (cabin pressurizations) and even greater flight hours in a single year. An unavoidable by-product of aircraft use is that crack, impact, and corrosion flaws develop throughout the aircraft's skin and substructure elements. Economic barriers to the purchase of new aircraft have placed even greater demands on efficient and safe repair methods. The use of bonded composite doublers offers the airframe manufacturers and aircraft maintenance facilities a cost effective method to safely extend the lives of their aircraft. Instead of riveting multiple steel or aluminum plates to facilitate an aircraft repair, it is now possible to bond a single Boron-Epoxy composite doubler to the damaged structure. The FAA's Airworthiness Assurance Center at Sandia National Labs (AANC), Boeing, and Federal Express completed a pilot program to validate and introduce composite doubler repair technology to the U.S. commercial aircraft industry. This project focused on repair of DC-10 fuselage structure and its primary goal was to demonstrate routine use of this repair technology using niche applications that streamline the design-to-installation process. As composite doubler repairs gradually appear in the commercial aircraft arena, successful flight operation data is being accumulated. These commercial aircraft repairs are not only demonstrating the engineering and economic advantages of composite doubler technology but they are also establishing the ability of commercial maintenance depots to safely adopt this repair technique. This report presents the array of engineering activities that were completed in order to make this technology available for widespread commercial aircraft use. Focused laboratory testing was conducted to compliment the field data and to address specific issues regarding damage tolerance and flaw growth in composite doubler repairs. Fatigue and strength tests were performed on a simulated wing repair using a substandard design and a flawed installation. In addition, the new Sol-Gel surface preparation technique was evaluated. Fatigue coupon tests produced Sol-Gel results that could be compared with a large performance database from conventional, riveted repairs. It was demonstrated that not only can composite doublers perform well in severe off-design conditions (low doubler stiffness and presence of defects in doubler installation) but that the Sol-Gel surface preparation technique is easier and quicker to carry out while still producing optimum bonding properties. Nondestructive inspection (NDI) methods were developed so that the potential for disbond and delamination growth could be monitored and crack growth mitigation could be quantified. The NDI methods were validated using full-scale test articles and the FedEx aircraft installations. It was demonstrated that specialized NDI techniques can detect flaws in composite doubler installations before they reach critical size. Probability of Detection studies were integrated into the FedEx training in order to quantify the ability of aircraft maintenance depots to properly monitor these repairs. In addition, Boeing Structural Repair and Nondestructive Testing Manuals were modified to include composite doubler repair and inspection procedures. This report presents the results from the FedEx Pilot Program that involved installation and surveillance of numerous repairs on operating aircraft. Results from critical NDI evaluations are reported in light of damage tolerance assessments for bonded composite doublers. This work has produced significant interest from airlines and aircraft manufacturers. The successful Pilot Program produced flight performance history to establish the durability of bonded composite patches as a permanent repair on commercial aircraft structures. This report discusses both the laboratory data and Pilot Program results from repair installations on operating aircraft to introduce composite doubler repairs into mainstream commercial aircraft use.

Roach, Dennis Patrick; Rackow, Kirk A.

2007-07-01T23:59:59.000Z

211

Effect of multiple repairs in girth welds of pipelines on the mechanical properties  

Science Conference Proceedings (OSTI)

This work presents the results of multiple weld repairs in the same area in seamless API X-52 microalloyed steel pipe. Four conditions of shielded metal arc welding repairs and one as-welded specimen of the girth weld were characterized to determine changes in the microstructure, grain size in the heat affected zone, and to evaluate their effect on the mechanical properties of the weld joints. The mechanical properties by means of tension tests, Charpy-V impact resistance and Vickers hardness of the welds were analyzed. The results indicate that significant changes are not generated in the microstructural constituents of the heat affected zone. Grain growth in the heat affected zone at the specimen mid-thickness with the number of repairs was observed. Tensile strength of the weld joints meets the requirement of the API 1104 standard even after the fourth weld repair. Significant reduction in Charpy-V impact resistance with the number of weld repairs was found when the notch location was in the intersection of the fusion line with the specimen mid-thickness. A significant increase in the Vickers hardness of the heat affected zone occurred after the first repair and a gradual decrease in the Vickers hardness occurred as the number of repairs increases.

Vega, O.E.; Hallen, J.M. [Departamento de Ingenieria Metalurgica, ESIQIE-IPN, Laboratorios Pesados de Metalurgia, UPALM, Zacatenco, C.P. 07738, Mexico D.F. (Mexico); Villagomez, A. [Construcciones Maritimas Mexicanas, CMM-PROTEXA, Av. Periferica s/n, Fracc. Lomas de Holche, C.P. 24120, Cd. del Carmen, Campeche (Mexico); Contreras, A. [Instituto Mexicano del Petroleo, Investigacion en Ductos, Corrosion y Materiales, Eje Central Lazaro Cardenas Norte 152 Col. San Bartolo Atepehuacan, C.P. 07730, Mexico D.F. (Mexico)], E-mail: acontrer@imp.mx

2008-10-15T23:59:59.000Z

212

Fabrication Flaw Density and Distribution In Repairs to Reactor Pressure Vessel and Piping Welds  

Science Conference Proceedings (OSTI)

The Pacific Northwest National Laboratory is developing a generalized fabrication flaw distribution for the population of nuclear reactor pressure vessels and for piping welds in U.S. operating reactors. The purpose of the generalized flaw distribution is to predict component-specific flaw densities. The estimates of fabrication flaws are intended for use in fracture mechanics structural integrity assessments. Structural integrity assessments, such as estimating the frequency of loss-of-coolant accidents, are performed by computer codes that require, as input, accurate estimates of flaw densities. Welds from four different reactor pressure vessels and a collection of archived pipes have been studied to develop empirical estimates of fabrication flaw densities. This report describes the fabrication flaw distribution and characterization in the repair weld metal of vessels and piping. This work indicates that large flaws occur in these repairs. These results show that repair flaws are complex in composition and sometimes include cracks on the ends of the repair cavities. Parametric analysis using an exponential fit is performed on the data. The relevance of construction records is established for describing fabrication processes and product forms. An analysis of these records shows there was a significant change in repair frequency over the years when these components were fabricated. A description of repair flaw morphology is provided with a discussion of fracture mechanics significance. Fabrication flaws in repairs are characterized using optimized-access, high-sensitivity nondestructive ultrasonic testing. Flaw characterizations are then validated by other nondestructive evaluation techniques and complemented by destructive testing.

GJ Schuster, FA Simonen, SR Doctor

2008-04-01T23:59:59.000Z

213

Applying Adaptive Evolutionary Algorithms to Hard Problems  

E-Print Network (OSTI)

Applying Adaptive Evolutionary Algorithms to Hard Problems J.I. van Hemert1 jvhemert into two distinct parts. The main theme is adaptive evolutionary algorithms. The rst part covers. The second part mainly consists of the development of a library. Its use is aimed at evolutionary algorithms

Emmerich, Michael

214

Uniform insulation applied-B ion diode  

DOE Patents (OSTI)

An applied-B field extraction ion diode has uniform insulation over an anode surface for increased efficiency. When the uniform insulation is accomplished with anode coils, and a charge-exchange foil is properly placed, and ions may be focused at a point on the z axis.

Seidel, D.B.; Slutz, S.A.

1986-04-11T23:59:59.000Z

215

Uniform insulation applied-B ion diode  

DOE Patents (OSTI)

An applied-B field extraction ion diode has uniform insulation over an anode surface for increased efficiency. When the uniform insulation is accomplished with anode coils, and a charge-exchange foil is properly placed, the ions may be focused at a point on the z axis.

Seidel, David B. (Albuquerque, NM); Slutz, Stephen A. (Albuquerque, NM)

1988-01-01T23:59:59.000Z

216

Microsoft Word - SPR Emergency Pipeline Repair, 2013-2017 NEPA.docx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Emergency Pipeline and Piping Repair, 2013-2017 Emergency Pipeline and Piping Repair, 2013-2017 Description: Subcontractor shall shall provide all labor, materials, equipment, supervision, transportation and services required to perform emergency repairs on the SPR system site piping (including underground fire protection systems and offsite pipelines). Subcontractor shall mobilize equipment to perform excavation, backfill, hydrostatic testing, welding and cutting, blasting, coating and painting of large and small diameter piping systems on the SPR facilities and offsite pipelines. Subcontractor shall also assist in emergency exercises by assemblying temporary piping spools and positioning pump skids and temporary supports. This NEPA document covers the period from 2013-2017.

217

Categorical Exclusion Determinations: B3.6 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

20, 2012 20, 2012 CX-009354: Categorical Exclusion Determination High Resolution 3D Laser Imaging for Inspection, Maintenance, Repair and Operations - Phase II CX(s) Applied: A9, A11, B3.6 Date: 09/20/2012 Location(s): Colorado Offices(s): National Energy Technology Laboratory September 19, 2012 CX-009363: Categorical Exclusion Determination Development and Test of a 1,000 Level 3C Fiber Optic Borehole Seismic Receiver Array Applied to Carbon Sequestration CX(s) Applied: A1, A9, A11, B3.6 Date: 09/19/2012 Location(s): Multiple Offices(s): National Energy Technology Laboratory September 19, 2012 CX-009362: Categorical Exclusion Determination Small Scale Coal-Biomass to Liquids Using Highly Selective FT Synthesis CX(s) Applied: B3.6 Date: 09/19/2012 Location(s): Alabama Offices(s): National Energy Technology Laboratory

218

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 8690 of 29,416 results. 81 - 8690 of 29,416 results. Download CX-001368: Categorical Exclusion Determination Repair Domestic Water Leak North of 719-18A CX(s) Applied: B1.3 Date: 03/16/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-001368-categorical-exclusion-determination Download CX-001369: Categorical Exclusion Determination Repair Firewater Line in B-Area East Side (Road C-2) near Post Indicator Valve 2118 CX(s) Applied: B1.3 Date: 03/16/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-001369-categorical-exclusion-determination Download CX-001370: Categorical Exclusion Determination Repair Water Leak at 607-59G at Central Sanitary Wastewater Plant

219

Title Page Applied and Environmental Microbiology 1  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied and Environmental Microbiology 1 Applied and Environmental Microbiology 1 2 Title Natural Competence in Thermoanaerobacter and Thermoanaerobacterium Species 3 Running Title Thermonanerobacter Natural Competence 4 5 Authors and Affiliations 6 A. Joe Shaw 1,2 , David A. Hogsett 1 , Lee R. Lynd 1,2,3 * 7 1 Mascoma Corporation, Lebanon, NH 03766 8 2 Thayer School of Engineering, Dartmouth College, Hanover, NH 03755 9 3 Department of Biological Sciences, Dartmouth College, Hanover, NH 03755 10 11 Corresponding Author 12 Lee R. Lynd 13 Thayer School of Engineering, Dartmouth College, Hanover, NH 03755 14 Phone: 603.646.2231 15 Email: lee.lynd@dartmouth.edu 16 17 18 19 20 21 22 23 Copyright © 2010, American Society for Microbiology and/or the Listed Authors/Institutions. All Rights Reserved.

220

Fundamental & Applied Bioenergy | Clean Energy | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Bioenergy Bioenergy SHARE Fundamental and Applied Bioenergy Steven Brown (left) and Shihui Yang have developed a microbial strain with an improved ability to convert wood products to biofuel as part of research within the DOE BioEnergy Science Center.Source: ORNL News article ORNL researchers are investigating the biological mechanisms underlying production of biofuels so that those mechanisms can be improved and used to develop a new generation of efficient bioenergy strategies that will reduce U.S. dependence on foreign oil and help curb carbon emissions. Fundamental and applied bioenergy research at ORNL includes studies conducted within the BioEnergy Science Center and the following research areas: Bioconversion Science and Technology Plant-Microbe Interfaces

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Apply for Beam Time | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Apply for Beam Time Apply for Beam Time NEXT PROPOSAL DEADLINE: March 7, 2014 @ 11:59 PM (Chicago time) Submit Proposal » SEE ALSO: Calendar: deadlines, run & review dates Help Page: frequently asked questions, tips for success, common errors, blank forms, instructions Review Criteria Sectors Directory: check CAT websites for info about managed beam time The Run 2014-2 proposal submission deadline is 11:59 p.m. (Chicago time) March 7, 2014. The system will open to accept proposals beginning December 20, 2013. NEW USERS: to avoid delays and to make the most of your time on site, read Become a User. You must register as a user and receive a badge number before submitting a proposal. About the Beam Time Request Process All beam time at the APS must be requested each cycle through the web-based

222

Applying DSM evaluation results to utility planning  

SciTech Connect

This paper describes the results of a study to assess the application of DSM evaluation results to utility forecasting and planning. The paper has three objectives: (1) identify forecasting and planning applications of evaluation studies, (2) identify major obstacles and problems associated with applying evaluation results to forecasting and planning, and (3) suggest approaches to address the major problems. The paper summarizes results from interviews with utilities, regulators, and consultants to determine how the utility industry currently applies evaluation results in forecasting and planning. The paper also includes results from a detailed case study of Sacramento Municipal Utility District (SMUD) and Southern California Edison Company (SCE), two utilities with large DSM programs and active evaluation efforts.

Baxter, L.W.

1995-07-01T23:59:59.000Z

223

A Protein that Repairs Damage to Cancer Cells | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

An X-ray Vortex on the Horizon? An X-ray Vortex on the Horizon? How Two Drops Become One Scientists Discover How Nanocluster Contaminants Increase Risk of Spreading Mobile RNA is Poised and Ready Glass Does a Double-Take Science Highlights Archives: 2013 | 2012 | 2011 | 2010 2009 | 2008 | 2007 | 2006 2005 | 2004 | 2003 | 2002 2001 | 2000 | 1998 | Subscribe to APS Science Highlights rss feed A Protein that Repairs Damage to Cancer Cells MAY 5, 2008 Bookmark and Share The ABH2-DNA complex. A team of University of Chicago scientists has shown how two proteins locate and repair damaged genetic material inside cells. Because one of the proteins detects and repairs DNA damage that may result from a certain type of cancer therapy, the researchers raised the possibility of designing a molecule that could interfere with the repair process, making cancer

224

ASSESSMENT OF INDIVIDUAL VARIATION IN DNA DOUBLE-STRAND BREAK REPAIR CAPACITY IN HUMAN DIPLOID FIBROBLASTS  

NLE Websites -- All DOE Office Websites (Extended Search)

ASSESSMENT OF INDIVIDUAL VARIATION IN DNA DOUBLE-STRAND ASSESSMENT OF INDIVIDUAL VARIATION IN DNA DOUBLE-STRAND BREAK REPAIR CAPACITY IN HUMAN DIPLOID FIBROBLASTS Paul F. Wilson, John M. Hinz, Peter B. Nham, Salustra S. Urbin, Cynthia B. Thomas, Irene M. Jones, and Larry H. Thompson Biosciences Directorate, Lawrence Livermore National Laboratory, Livermore, CA The induction of bi-stranded clustered DNA damage (BCD), which includes direct DNA double-strand breaks (DSBs), is a hallmark of ionizing radiation (IR) exposure. Incorrectly repaired DSBs can cause chromosomal rearrangements and an increased risk of genomic instability and cancer. Because there is polymorphic variation in DNA repair genes and much of this variation is predicted to have a functional impact, healthy people likely vary in their capacity to repair DSBs and other BCD. This project

225

In-Situ Repairs of Oil Industry Pipelines, Tanks and Vessels by ...  

Science Conference Proceedings (OSTI)

Abstract Scope, Metal arc welding under oil (MAW-UO) is a new, revolutionary process to repair a pipeline, tank or vessel by welding in case of flaws and ...

226

Plug repairs of marine glass fiber / vinyl ester laminates subjected to uniaxial tension  

E-Print Network (OSTI)

Glass fiber/vinyl ester composite laminates are currently being used and proposed for the hulls, bulkheads, and superstructures of large ships. This thesis examines the effectiveness of the repair of such laminates using ...

Michelis, Alexandros

2009-01-01T23:59:59.000Z

227

Maintenance and repair: a simulation model for field service with condition-based maintenance  

Science Conference Proceedings (OSTI)

In this paper, we consider field service in which service providers are responsible for maintaining equipment performance. To do so, preventive maintenance work is usually required in addition to repairs. Field service managers are often faced with the ...

Yiqing Lin; Arthur Hsu; Ravi Rajamani

2002-12-01T23:59:59.000Z

228

Tiny Terminators: New Micro-Robots Assemble, Repair Themselves and Are Surprisingly Strong  

Energy.gov (U.S. Department of Energy (DOE))

Tiny robots that can assemble and repair themselves? Watch a video of Argonne National Laboratory's micro-robots that easily perform tasks that can challenge other robots, including moving objects that are larger than themselves.

229

Modeling and centralization of strategic inventory for repairable and long lead-time spare parts  

E-Print Network (OSTI)

This thesis develops an optimal inventory model for repairable and long leadtime spare parts for an Engine overhaul business. In addition, it presents a business case for centralization of inventory. Pratt & Whitney purchased ...

Duncan, Tyeliah Elaine

2011-01-01T23:59:59.000Z

230

Low Dose Radiation Induced DNA Damage Signaling and Repair Responses in  

NLE Websites -- All DOE Office Websites (Extended Search)

Induced DNA Damage Signaling and Repair Responses in Induced DNA Damage Signaling and Repair Responses in Human 3-Dimensional Skin Model System Yanrong Su, Jarah Meador and Adayabalam S. Balajee Center for Radiological Research, College of Physicians and Surgeons, Columbia University, 630 West, 168th Street, New York, NY 10032. Exposure to ionizing radiation (IR) inflicts a wide variety of lesions in the genomic DNA. Among them, DNA double strand break (DSB) is considered to be the critical lesion for most of the deleterious radiation effects including carcinogenesis. Much of our knowledge on induction and repair kinetics of DSB has come from studies in two dimensional cell culture systems. However, the damage signaling and repair responses to DSB in tissue microenvironment are largely unknown. Knowledge of tissue responses to

231

Review of Maintenance and Repair Times for Components in Technological Facilities  

SciTech Connect

This report is a compilation of some unique component repair time data and it also presents citations of more extensive reports where lists of repair times can be found. This collection of information should support analysts who seek to quantify maintainability and availability of high technology and nuclear energy production systems. While there are newer sources of repair time information, most, if not all, of the newer sources are proprietary and cannot be shared. This report offers data that, while older, is openly accessible and can serve as reasonable estimates of repair times, at least for initial studies. Some times were found for maintenance times in radiation environments, and some guidance for multiplicative factors to use to account for work in contamination areas.

L. C. Cadwallader

2012-11-01T23:59:59.000Z

232

Topical Report: Application of the Excavate and Weld Repair Process for Repair and Mitigation of Alloy 182 and 82 in PWRs  

Science Conference Proceedings (OSTI)

Weld overlay is a mature technology for the repair of PWR nozzle dissimilar metal butt welds that are susceptible to primary water stress corrosion cracking (PWSCC). While weld-overlay technology continues to serve the industry well, a viable alternative is desirable for large-bore nozzle welds (>24 inches outside diameter) to minimize the time required to perform the repair and to serve in cases in which significant physical interferences near the Alloy 82/182 dissimilar metal weld would make it difficu...

2010-12-20T23:59:59.000Z

233

Technical Repair Guidelines for the Limitorque Model SMB-00 Valve Actuator  

Science Conference Proceedings (OSTI)

This technical repair guideline (TRG) is the second in a series of documents devoted to comprehensive maintenance and repair of the motor-operated Limitorque SMB-00 valve actuator. The Limitorque SMB-00 valve actuator is mounted on a nonrotating rising stem valve and is applicable to other types of valves and installation arrangements. This report was written with the latest available information, however, changes to the actuator's design, parts availability, etc. may supersede this document but will not...

1995-06-30T23:59:59.000Z

234

Welding and Repair Technology Center: Essential and Emergency Service Water System Issues  

Science Conference Proceedings (OSTI)

Because of the numerous ASME Code and Regulatory (Nuclear Regulatory Commission) documents addressing operability and repair of through-wall leakage in class 2 and 3 systems, inconsistencies exist in their interpretation and application. This report is intended to summarize and clarify the current Code and Regulatory requirements and provisions applicable to operability and repair of essential and emergency service water systems with leakage through the pressure boundary.

2010-10-29T23:59:59.000Z

235

RESTORING A DAMAGED 16-YEAR -OLD INSULATING POLYMER CONCRETE DIKE OVERLAY: REPAIR MATERIALS AND TECHNOLOGIES.  

Science Conference Proceedings (OSTI)

The objective of this program was to design and formulate organic polymer-based material systems suitable for repairing and restoring the overlay panels of insulating lightweight polymer concrete (ILPC) from the concrete floor and slope wall of a dike at KeySpan liquefied natural gas (LNG) facility in Greenpoint, Brooklyn, NY, just over sixteen years ago. It also included undertaking a small-scale field demonstration to ensure that the commercial repairing technologies were applicable to the designed and formulated materials.

SUGAMA,T.

2007-01-01T23:59:59.000Z

236

Repair of UV damaged DNA, genes and proteins of yeast and human  

Science Conference Proceedings (OSTI)

Our objectives are to determine the molecular mechanism of the incision step of excision repair of ultraviolet (UV) light damaged DNA in eukaryotic organisms, using the yeast Saccharomyces cerevisiae as a model system, as well as studying the human homologs of yeast excision repair and postreplication repair proteins. In addition to its single-stranded DNA-dependent A TPase and DNA helicase activities, we have found that RAD3 protein also possesses DNA-RNA helicase activity, and that like RAD3, the Schizosaccharomyces pombe RAD3 homolog, rhp3{sup +}, is an essential gene. We have overexpressed the human RAD3 homolog, ERCC2, in yeast to facilitate its purification. The RAD10 protein was purified to homogeneity and shown to bind DNA. ERCC3y, the yeast homolog of the human ERCC-3/XP-B gene, has been sequenced and shown to be essential for viability. The Drosophila and human homologs of RAD6, required for postreplication repair and UV induced mutagenesis, were shown to complement the rad6 {Delta} mutation of yeast. Since defective DNA repair and enhanced neoplasia characterize several human genetic diseases, and repair proteins are highly conserved between yeast and man, a thorough understanding of the molecular mechanisms of DNA repir in yeast should provide a better understanding of the causes of carcinogenesis.

Prakash, L.

1991-04-01T23:59:59.000Z

237

Laser engineered net shaping (LENS) for the repair and modification of NWC metal components.  

DOE Green Energy (OSTI)

Laser Engineered Net Shaping{trademark} (LENS{reg_sign}) is a layer additive manufacturing process that creates fully dense metal components using a laser, metal powder, and a computer solid model. This process has previously been utilized in research settings to create metal components and new material alloys. The ''Qualification of LENS for the Repair and Modification of Metal NWC Components'' project team has completed a Technology Investment project to investigate the use of LENS for repair of high rigor components. The team submitted components from four NWC sites for repair or modification using the LENS process. These components were then evaluated for their compatibility to high rigor weapons applications. The repairs included hole filling, replacement of weld lips, addition of step joints, and repair of surface flaws and gouges. The parts were evaluated for mechanical properties, corrosion resistance, weldability, and hydrogen compatibility. This document is a record of the LENS processing of each of these component types and includes process parameters, build strategies, and lessons learned. Through this project, the LENS process was shown to successfully repair or modify metal NWC components.

Atwood, Clinton J.; Smugeresky, John E. (Sandia National Labs, Livermore,CA); Gill, David Dennis

2006-11-01T23:59:59.000Z

238

Applied Environmental Microbiology | VIMSS - Virtual Institute for  

NLE Websites -- All DOE Office Websites (Extended Search)

Collection of Soil Samples Collection of Soil Samples Identification of Natural Stressors Profiling of Microbial Population Field and Simulated Conceptual Model Facilities The Applied Environmental Microbiology (AEM) Core is the source of environmental data and samples that determine the stressors that will be studied, pro-vides the environments for growing the organisms to be tested, simulates stressed environments, and verifies the conceptual models to determine how these stress regulatory pathways control the biogeochemistry of contaminated sites. The specific goals of the AEM Core are to: Survey and map DOE sites contaminated by metals and radionuclides using chemical and molecular/ microbiological parameters to determine major microbial populations and potential stressors for Desulfovibrio vulgaris,

239

Statistical Uncertainty Analysis Applied to Criticality Calculation  

Science Conference Proceedings (OSTI)

In this paper, we present an uncertainty methodology based on a statistical approach, for assessing uncertainties in criticality prediction using monte carlo method due to uncertainties in the isotopic composition of the fuel. The methodology has been applied to criticality calculations with MCNP5 with additional stochastic input of the isotopic fuel composition. The stochastic input were generated using the latin hypercube sampling method based one the probability density function of each nuclide composition. The automatic passing of the stochastic input to the MCNP and the repeated criticality calculation is made possible by using a python script to link the MCNP and our latin hypercube sampling code.

Hartini, Entin; Andiwijayakusuma, Dinan; Susmikanti, Mike; Nursinta, A. W. [Centre for Nuclear Informatics Development, National Nuclear Energy Agency of Indonesia (Indonesia)

2010-06-22T23:59:59.000Z

240

The Applied Mathematics for Power Systems (AMPS)  

SciTech Connect

Increased deployment of new technologies, e.g., renewable generation and electric vehicles, is rapidly transforming electrical power networks by crossing previously distinct spatiotemporal scales and invalidating many traditional approaches for designing, analyzing, and operating power grids. This trend is expected to accelerate over the coming years, bringing the disruptive challenge of complexity, but also opportunities to deliver unprecedented efficiency and reliability. Our Applied Mathematics for Power Systems (AMPS) Center will discover, enable, and solve emerging mathematics challenges arising in power systems and, more generally, in complex engineered networks. We will develop foundational applied mathematics resulting in rigorous algorithms and simulation toolboxes for modern and future engineered networks. The AMPS Center deconstruction/reconstruction approach 'deconstructs' complex networks into sub-problems within non-separable spatiotemporal scales, a missing step in 20th century modeling of engineered networks. These sub-problems are addressed within the appropriate AMPS foundational pillar - complex systems, control theory, and optimization theory - and merged or 'reconstructed' at their boundaries into more general mathematical descriptions of complex engineered networks where important new questions are formulated and attacked. These two steps, iterated multiple times, will bridge the growing chasm between the legacy power grid and its future as a complex engineered network.

Chertkov, Michael [Los Alamos National Laboratory

2012-07-24T23:59:59.000Z

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

EG G Mound Applied Technologies payroll system  

SciTech Connect

EG G Mound Applied Technologies, Inc., manages and operates the Mound Facility, Miamisburg, Ohio, under a cost-plus-award-fee contract administered by the Department of Energy's Albuquerque Field Office. The contractor's Payroll Department is responsible for prompt payment in the proper amount to all persons entitled to be paid, in compliance with applicable laws, regulations, and legal decisions. The objective was to determine whether controls were in place to avoid erroneous payroll payments. EG G Mound Applied Technologies, Inc., did not have all the internal controls required by General Accounting Office Title 6, Pay, Leave, and Allowances.'' Specifically, they did not have computerized edits, separation of duties and responsibilities, and restricted access to payroll data files. This condition occurred because its managers were not aware of Title 6 requirements. As a result, the contractor could not assure the Department of Energy that payroll costs were processes accurately; and fraud, waste, or abuse of Department of Energy funds could go undetected. Our sample of 212 payroll transactions from a population of 66,000 in FY 1991 disclosed only two minor processing errors and no instances of fraud, waste or abuse.

Not Available

1992-02-07T23:59:59.000Z

242

A Case Study of the Applied Learning Academy: Reconceptualized Quantum Design of Applied Learning  

E-Print Network (OSTI)

The purpose of this qualitative study was to examine the Applied Learning Academy (ALA) and allow the lessons learned from this public school to emerge from the narrative stories of past students, parents, teachers, administrators, and local business associates who have been directly involved and influenced by the applied learning teaching method. Accountability is critical for all public and charter schools. Districts have been trying to raise the standards with new programs and strategies in an effort to make learning experiences relevant to students? daily lives. Revisiting John Dewey?s philosophy from the progressive movement, project-based, service learning, community partnerships, and portfolio assessment helped to create the applied learning method. In the present study, a qualitative case study approach was utilized to identify successful factors, benefits, and drawbacks of applied learning in order to describe the transition of portfolio assessment, project-based learning, and community-based partnerships within the classroom and to understand the impact and misconceptions of applied learning as experienced through the Recognized Campus, ALA, a 6-8th public middle school within a large urban school district. Participant interviews, field observations, and historical records were collected which indicated that student centered project-based curriculum, small school size creating family relationships, community involvement with partnerships, service learning projects, and metacognitive development from portfolio assessments were the major factors that supported academic rigor and relevance because of the real educational applications in this applied learning middle school. Briefly defined, applied learning is when a problem is seen within the surrounding community, and the solution is generated by the students. This progressive 15-year impact of applied learning ultimately leads to the development of four applied learning schools despite the misconception that applied learning was a remedial or gifted program. Redefining applied learning for a better understanding developed a reconceptualized diagram borrowed from the quantum mechanics model. Reconceptualization expands the interpretation by increasing the intellectual flexibility. As the student becomes energized from the acquired knowledge of learning applicable skills through service learning, project-based curriculum, and portfolio assessment, the student?s academic growth should increase to a higher, educational ?energy level? supported by the critical, situated-learning, and feminist theories.

Gordon, Denise

2009-12-01T23:59:59.000Z

243

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

11 - 28620 of 28,904 results. 11 - 28620 of 28,904 results. Download CX-003241: Categorical Exclusion Determination Purchase of Jocko Spring Creek Property CX(s) Applied: B1.25 Date: 07/08/2010 Location(s): Lake County, Montana Office(s): Bonneville Power Administration http://energy.gov/nepa/downloads/cx-003241-categorical-exclusion-determination Download CX-003242: Categorical Exclusion Determination Purchase of the Mission Creek Property CX(s) Applied: B1.25 Date: 07/08/2010 Location(s): Lake County, Montana Office(s): Bonneville Power Administration http://energy.gov/nepa/downloads/cx-003242-categorical-exclusion-determination Download CX-003610: Categorical Exclusion Determination Ross-Lexington Number 1 Access Road Repair Project CX(s) Applied: B1.3 Date: 08/25/2010 Location(s): Cowlitz County, Washington

244

Categorical Exclusion Determinations: Kansas | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 7, 2010 September 7, 2010 CX-003767: Categorical Exclusion Determination Kansas-County-Leavenworth CX(s) Applied: A9, B2.5, B5.1 Date: 09/07/2010 Location(s): Leavenworth, Kansas Office(s): Energy Efficiency and Renewable Energy September 2, 2010 CX-003826: Categorical Exclusion Determination Project 1712 Repair OF002 Cured-in-Place Pipe Liner Near AICO Inlet CX(s) Applied: B6.1 Date: 09/02/2010 Location(s): Kansas Office(s): Kansas City Site Office, NNSA-Headquarters September 1, 2010 CX-003863: Categorical Exclusion Determination Design and Demonstration of an Advanced Agricultural Feedstock Supply System for Lignocellulosic Bioenergy Production CX(s) Applied: A9, B3.6, B5.1 Date: 09/01/2010 Location(s): Hugoton, Kansas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

245

Categorical Exclusion Determinations: Environmental Management | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

May 4, 2011 May 4, 2011 CX-005761: Categorical Exclusion Determination 707-C Storm Drain Repairs CX(s) Applied: B1.3 Date: 05/04/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office April 28, 2011 CX-005765: Categorical Exclusion Determination Feed Pump Flush Water Connection/Lifting Bail Interference (General - F/H Tank Farms) CX(s) Applied: B1.3 Date: 04/28/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office April 28, 2011 CX-005892: Categorical Exclusion Determination Columbia River Inter-Tidal Fish Commission Use of White Bluffs Boat Launch and Hanford Town Boat Ramp for Salmon Tagging CX(s) Applied: B3.8 Date: 04/28/2011 Location(s): Richland, Washington Office(s): Environmental Management, Office of River Protection-Richland

246

Categorical Exclusion Determinations: Savannah River Operations Office |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9, 2012 9, 2012 CX-008639: Categorical Exclusion Determination Establish Laydown Yard East of 281-3F CX(s) Applied: B1.15 Date: 05/29/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office May 29, 2012 CX-008638: Categorical Exclusion Determination Excavate to Repair Underground Domestic Water Leak between Tanks 5 and 7 CX(s) Applied: B1.3 Date: 05/29/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office May 29, 2012 CX-008637: Categorical Exclusion Determination Operation and Maintenance of Inductively Coupled Plasma Mass Spectrometry Method in 773, B142 CX(s) Applied: B3.6 Date: 05/29/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office May 29, 2012 CX-008636: Categorical Exclusion Determination Analysis of Organic Species by Gas Chromatography (GC) and Gas

247

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7, 2011 7, 2011 CX-005173: Categorical Exclusion Determination Roof Replacement/Repair, Gutters, and Downspouts CX(s) Applied: B5.1 Date: 01/27/2011 Location(s): Northampton County, Pennsylvania Office(s): Energy Efficiency and Renewable Energy, Golden Field Office January 27, 2011 CX-005127: Categorical Exclusion Determination Philadelphia (Pennsylvania): Energy Loan to Community Legal Services for the Erie Avenue Office CX(s) Applied: B5.1 Date: 01/27/2011 Location(s): Philadelphia, Pennsylvania Office(s): Energy Efficiency and Renewable Energy, Golden Field Office January 27, 2011 CX-005126: Categorical Exclusion Determination Rural Electric Cooperative Geothermal Development Electric and Agriculture CX(s) Applied: A9, B3.1, B5.1, B5.12 Date: 01/27/2011 Location(s): Oregon

248

FE Categorical Exclusions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

21, 2010 21, 2010 CX-002830: Categorical Exclusion Determination Repairs to Men?s Bathroom in West Hackberry Building 302 CX(s) Applied: B1.3 Date: 06/21/2010 Location(s): West Hackberry, Louisiana Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office June 21, 2010 CX-002829: Categorical Exclusion Determination West Hackberry Brine Disposal Wells Control Systems Upgrade CX(s) Applied: B1.7 Date: 06/21/2010 Location(s): West Hackberry, Louisiana Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office June 18, 2010 CX-002733: Categorical Exclusion Determination Computer Simulation and Experimental Study on Novel Chromium-Based High Temperature Alloys CX(s) Applied: B3.6 Date: 06/18/2010 Location(s): Baton Rouge, Louisiana Office(s): Fossil Energy, National Energy Technology Laboratory

249

Categorical Exclusion Determinations: South Carolina | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 18, 2010 March 18, 2010 CX-001311: Categorical Exclusion Determination South Carolina Clean Green Investment Incentives - Solar Initiatives CX(s) Applied: B5.1 Date: 03/18/2010 Location(s): Kingstree, South Carolina Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory March 18, 2010 CX-001365: Categorical Exclusion Determination Repair Domestic Water Line Near Entrance to 717-F CX(s) Applied: B1.3 Date: 03/18/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office March 17, 2010 CX-001241: Categorical Exclusion Determination Wellford Landfill Methane and Greenhouse Gas to Energy Project CX(s) Applied: A9 Date: 03/17/2010 Location(s): Spartanburg County, South Carolina Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

250

Colorado | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

January 9, 2012 January 9, 2012 Transmission Forum Agenda - February 2012 December 21, 2011 CX-007391: Categorical Exclusion Determination Time-lapse Joint Inversion of Geophysical Data and its Application to Geothermal Prospecting GEODE CX(s) Applied: A9, B3.1, B3.6 Date: 12/21/2011 Location(s): Colorado Offices(s): Golden Field Office December 21, 2011 CX-007389: Categorical Exclusion Determination Advances in Hydrogeochemical Indicators for the Discovery of New Geothermal Resources in the Great Basin CX(s) Applied: A9, B3.6 Date: 12/21/2011 Location(s): Colorado Offices(s): Golden Field Office December 20, 2011 CX-007461: Categorical Exclusion Determination High Resolution 3-dimensional Laser Imaging for Inspection, Maintenance, Repair and Operations - Phase II CX(s) Applied: B3.6

251

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

41 - 7250 of 28,560 results. 41 - 7250 of 28,560 results. Download CX-010621: Categorical Exclusion Determination Pittsburgh Site Wide Exterior Door Repair/Replacement Project CX(s) Applied: B2.1, B2.5 Date: 07/17/2013 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-010621-categorical-exclusion-determination Download CX-010817: Categorical Exclusion Determination Technology Integration Program - Field Trial - Site Three CX(s) Applied: A9 Date: 08/01/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-010817-categorical-exclusion-determination Download CX-010819: Categorical Exclusion Determination Technology Integration Program - Field Trial - Site Three CX(s) Applied: B3.1, B3.6

252

Categorical Exclusion Determinations: Western Area Power  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

April 1, 2013 April 1, 2013 CX-010106: Categorical Exclusion Determination Flaming Gorge Microwave Site Communications Building Access Road Repairs CX(s) Applied: B1.3 Date: 04/01/2013 Location(s): Utah Offices(s): Western Area Power Administration-Rocky Mountain Region March 26, 2013 CX-010105: Categorical Exclusion Determination Urban Transmission Line Danger Tree Management CX(s) Applied: B1.3 Date: 03/26/2013 Location(s): Colorado, Colorado, Colorado, Colorado, Wyoming Offices(s): Western Area Power Administration-Rocky Mountain Region January 23, 2013 CX-009804: Categorical Exclusion Determination Kersey West Switching Station Interconnection Kiowa Creek - Welc 115 Kilovolt Transmission Line CX(s) Applied: B4.1, B4.11 Date: 01/23/2013 Location(s): Colorado Offices(s): Western Area Power Administration-Rocky Mountain Region

253

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5, 2011 5, 2011 CX-007153: Categorical Exclusion Determination Glen Canyon substation Transformer Addition CX(s) Applied: B4.6 Date: 05/05/2011 Location(s): Coconino County, Arizona Office(s): Western Area Power Administration-Desert Southwest Region May 5, 2011 CX-005852: Categorical Exclusion Determination Stegall-Wayside 230 Kilovolt Access Road Extension CX(s) Applied: B1.13 Date: 05/05/2011 Location(s): Dawes County, Wyoming Office(s): Western Area Power Administration-Rocky Mountain Region May 5, 2011 CX-005847: Categorical Exclusion Determination Rocky Reach - Maple Valley Access Road Repair CX(s) Applied: B1.3 Date: 05/05/2011 Location(s): King County, Washington Office(s): Bonneville Power Administration May 5, 2011 CX-005845: Categorical Exclusion Determination

254

Categorical Exclusion Determinations: B1.3 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 28, 2011 September 28, 2011 CX-006955: Categorical Exclusion Determination Repair Radiological Fixative Coatings in F Tank Farm CX(s) Applied: B1.3 Date: 09/28/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Sandia Site Office September 28, 2011 CX-006952: Categorical Exclusion Determination Install Two New Steam Line Poles to Replace Poles # K164 and K165 in 105-K Area CX(s) Applied: B1.3 Date: 09/28/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Sandia Site Office September 22, 2011 CX-006884: Categorical Exclusion Determination Replace Big Hill Raw Water Intake Structure Screen Wash Piping CX(s) Applied: B1.3 Date: 09/22/2011 Location(s): Big Hill, Texas Office(s): Strategic Petroleum Reserve Field Office, Sandia Site Office

255

Categorical Exclusion Determinations: South Carolina | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 28, 2011 March 28, 2011 CX-005843: Categorical Exclusion Determination Upgrade Heating, Ventilation, and Air Conditioner Supply and D-119/120 Lab Mods, 735-A CX(s) Applied: B1.15 Date: 03/28/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office March 23, 2011 CX-005855: Categorical Exclusion Determination Sidewalks Repair at 704-23K and 701-12K CX(s) Applied: B1.13 Date: 03/23/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office March 23, 2011 CX-005854: Categorical Exclusion Determination Building 705-A Renovations CX(s) Applied: B1.15 Date: 03/23/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office March 23, 2011

256

Categorical Exclusion Determinations: Idaho Operations Office | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 28, 2011 November 28, 2011 CX-007774: Categorical Exclusion Determination Rensselaer Infrastructure Upgrade to Enhance Research and Education in Nuclear Engineering - Rensselaer Polytechnic Institute CX(s) Applied: B3.6 Date: 11/28/2011 Location(s): New York Offices(s): Nuclear Energy, Idaho Operations Office November 28, 2011 CX-007773: Categorical Exclusion Determination An Integrated Upgrade of Scientific Equipment for Strengthening the Research and Education in Nuclear Energy at the Ohio State University CX(s) Applied: B1.2, B3.6 Date: 11/28/2011 Location(s): Ohio Offices(s): Nuclear Energy, Idaho Operations Office November 28, 2011 CX-007772: Categorical Exclusion Determination Idaho National Laboratory Asphalt Repair Project - North Wind Services, LLC CX(s) Applied: B1.3

257

Categorical Exclusion Determinations: B1.3 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 13, 2011 December 13, 2011 CX-007437: Categorical Exclusion Determination Routine Site Activities at the Shoal, Nevada, Site CX(s) Applied: B1.3, B3.1 Date: 12/13/2011 Location(s): Nevada Offices(s): Legacy Management December 13, 2011 CX-007443: Categorical Exclusion Determination Routine Site Activities at the Shirley Basin South, Wyoming, Disposal Site CX(s) Applied: B1.3, B1.11, B1.20, B3.1 Date: 12/13/2011 Location(s): Wyoming Offices(s): Legacy Management December 13, 2011 CX-007442: Categorical Exclusion Determination Routine Maintenance Activities at the Grand Junction, Colorado, Calibration Model Facility CX(s) Applied: B1.3, B1.24 Date: 12/13/2011 Location(s): Colorado Offices(s): Legacy Management December 5, 2011 CX-007511: Categorical Exclusion Determination Record of Categorical Exclusion for Repair Erosion Problems at Big Hill Raw

258

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 8590 of 29,416 results. 81 - 8590 of 29,416 results. Download CX-006405: Categorical Exclusion Determination 707-C Storm Drain Repairs CX(s) Applied: B1.3 Date: 05/16/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-006405-categorical-exclusion-determination Download CX-000891: Categorical Exclusion Determination Handling of Bulk Background Materials CX(s) Applied: B3.6 Date: 02/12/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-000891-categorical-exclusion-determination Download CX-000893: Categorical Exclusion Determination Benchtop Distillation and Recovery of Volatile Solvents CX(s) Applied: B3.6

259

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

61 - 26970 of 28,904 results. 61 - 26970 of 28,904 results. Download CX-010836: Categorical Exclusion Determination Subcontractor Roof Repair at 717-12S CX(s) Applied: B1.3 Date: 08/01/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-010836-categorical-exclusion-determination Download CX-010837: Categorical Exclusion Determination Disassembly, Relocation, and Reassembly of a Metal-framed Quonset Hut CX(s) Applied: B1.22 Date: 08/01/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-010837-categorical-exclusion-determination Download CX-010838: Categorical Exclusion Determination Raman and Absorption Spectroscopy CX(s) Applied: B3.6 Date: 07/31/2013 Location(s): South Carolina

260

FE Categorical Exclusions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8, 2010 8, 2010 CX-004402: Categorical Exclusion Determination The Use of Scrap Tires for Oil Well Stimulation CX(s) Applied: B3.6 Date: 11/08/2010 Location(s): Monroeville, Pennsylvania Office(s): Fossil Energy, National Energy Technology Laboratory November 8, 2010 CX-004401: Categorical Exclusion Determination The Use of Scrap Tires for Oil Well Stimulation CX(s) Applied: B3.6 Date: 11/08/2010 Location(s): Waynesburg, Pennsylvania Office(s): Fossil Energy, National Energy Technology Laboratory November 5, 2010 CX-004400: Categorical Exclusion Determination Repair Brick Support Plates on Connecting Bridges - Building 58 CX(s) Applied: B2.3 Date: 11/05/2010 Location(s): Allegheny City, Pennsylvania Office(s): Fossil Energy, National Energy Technology Laboratory November 5, 2010

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

11 - 25020 of 31,917 results. 11 - 25020 of 31,917 results. Download CX-005847: Categorical Exclusion Determination Rocky Reach - Maple Valley Access Road Repair CX(s) Applied: B1.3 Date: 05/05/2011 Location(s): King County, Washington Office(s): Bonneville Power Administration http://energy.gov/nepa/downloads/cx-005847-categorical-exclusion-determination Download CX-005772: Categorical Exclusion Determination C-Area Characterization CX(s) Applied: B3.1 Date: 04/13/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005772-categorical-exclusion-determination Download CX-005774: Categorical Exclusion Determination Decommissioning of Flow Through Filter Diesel Generators CX(s) Applied: B1.27 Date: 04/12/2011

262

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6, 2012 6, 2012 CX-009331: Categorical Exclusion Determination High Resolution 3D Laser Imaging for Inspection, Maintenance, Repair and Operations Phase II CX(s) Applied: B3.6 Date: 09/26/2012 Location(s): New Jersey Offices(s): National Energy Technology Laboratory September 26, 2012 CX-009433: Categorical Exclusion Determination Center for Biomass Utilization Renewal of Grant CX(s) Applied: B3.6 Date: 09/26/2012 Location(s): North Dakota, Minnesota Offices(s): Golden Field Office September 25, 2012 CX-009242: Categorical Exclusion Determination Development of Light Water Reactor Fuels with Enhanced Accident Tolerance - AREVA Federal Services LLC CX(s) Applied: B3.6, B3.15 Date: 09/25/2012 Location(s): Florida, Wisconsin Offices(s): Nuclear Energy September 25, 2012 CX-009241: Categorical Exclusion Determination

263

Categorical Exclusion Determinations: Colorado | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 5, 2012 September 5, 2012 CX-009189: Categorical Exclusion Determination (0675-1594) Eaton Corporation - Predictive Battery Management for Commercial Hybrid Vehicles CX(s) Applied: B3.6 Date: 09/05/2012 Location(s): Michigan, Minnesota, Colorado Offices(s): Advanced Research Projects Agency-Energy August 31, 2012 CX-009227: Categorical Exclusion Determination Beaver Creek- Big Sandy 115 Kilovolt Transmission Line Structure Replacements - Last Chance Fire CX(s) Applied: B4.13 Date: 08/31/2012 Location(s): Colorado Offices(s): Western Area Power Administration-Rocky Mountain Region August 29, 2012 CX-008913: Categorical Exclusion Determination High Resolution 3D Laser Imaging for Inspection, Maintenance, Repair and Operations - Phase II CX(s) Applied: A9, B3.6 Date: 08/29/2012

264

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

51 - 14260 of 29,416 results. 51 - 14260 of 29,416 results. Download CX-010135: Categorical Exclusion Determination Provide an Improved Heating, Ventilation and Air Conditioning System in 705-A CX(s) Applied: B1.3 Date: 03/11/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-010135-categorical-exclusion-determination Download CX-010136: Categorical Exclusion Determination Repair Sanitary Sewer Line South of 725-N CX(s) Applied: B1.3 Date: 03/11/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-010136-categorical-exclusion-determination Download CX-010137: Categorical Exclusion Determination Correct Obstruction in the Sprinkler System on Level 3 of HB-Line CX(s) Applied: B2.5

265

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5, 2010 5, 2010 CX-002268: Categorical Exclusion Determination From Sensing to Enhancing the Brain Processes CX(s) Applied: B3.12 Date: 02/25/2010 Location(s): Albuquerque, New Mexico Office(s): NNSA-Headquarters, Sandia Site Office February 24, 2010 CX-006661: Categorical Exclusion Determination Repair Flowline at 83-AX-4 CX(s) Applied: B5.2, B5.4 Date: 02/24/2010 Location(s): Casper, Wyoming Office(s): RMOTC February 24, 2010 CX-001126: Categorical Exclusion Determination 183-2C Removal of Switchgear Cubicle CX(s) Applied: B4.10 Date: 02/24/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office February 24, 2010 CX-000907: Categorical Exclusion Determination Improved Design Tools for Surface Water and Standing Column Well Heat Pump

266

Washington | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

25, 2010 25, 2010 CX-003611: Categorical Exclusion Determination Schultz - Raver Number 3 and 4 500-kilovolt (kV) Transmission Lines Spacer Replacement CX(s) Applied: B1.3 Date: 08/25/2010 Location(s): King County, Washington Office(s): Bonneville Power Administration August 25, 2010 CX-003610: Categorical Exclusion Determination Ross-Lexington Number 1 Access Road Repair Project CX(s) Applied: B1.3 Date: 08/25/2010 Location(s): Cowlitz County, Washington Office(s): Bonneville Power Administration August 25, 2010 CX-003609: Categorical Exclusion Determination Cushman North Fork Skokomish Powerhouse CX(s) Applied: A9 Date: 08/25/2010 Location(s): Tacoma, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 25, 2010 CX-003614: Categorical Exclusion Determination

267

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8, 2011 8, 2011 CX-005134: Categorical Exclusion Determination Provision of Funds to the Yakama Nation for the Purchase of Three Parcels of Property Along Reecer Creek CX(s) Applied: B1.25 Date: 01/28/2011 Location(s): Kittitas County, Washington Office(s): Bonneville Power Administration January 27, 2011 CX-005173: Categorical Exclusion Determination Roof Replacement/Repair, Gutters, and Downspouts CX(s) Applied: B5.1 Date: 01/27/2011 Location(s): Northampton County, Pennsylvania Office(s): Energy Efficiency and Renewable Energy, Golden Field Office January 27, 2011 CX-005127: Categorical Exclusion Determination Philadelphia (Pennsylvania): Energy Loan to Community Legal Services for the Erie Avenue Office CX(s) Applied: B5.1 Date: 01/27/2011 Location(s): Philadelphia, Pennsylvania

268

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

21 - 26530 of 28,560 results. 21 - 26530 of 28,560 results. Download CX-008618: Categorical Exclusion Determination Evaluation of Sorbent/Ion Exchangers for Radiochemical and Metal Separations CX(s) Applied: B3.6 Date: 06/26/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-008618-categorical-exclusion-determination Download CX-008619: Categorical Exclusion Determination Roof Repair at 105-C Disassembly CX(s) Applied: B1.3 Date: 06/22/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-008619-categorical-exclusion-determination Download CX-008620: Categorical Exclusion Determination F-Tank Farm Sump Pump and Discharge Piping CX(s) Applied: B1.3 Date: 06/22/2012 Location(s): South Carolina

269

Categorical Exclusion Determinations: National Energy Technology Laboratory  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0, 2012 0, 2012 CX-009354: Categorical Exclusion Determination High Resolution 3D Laser Imaging for Inspection, Maintenance, Repair and Operations - Phase II CX(s) Applied: A9, A11, B3.6 Date: 09/20/2012 Location(s): Colorado Offices(s): National Energy Technology Laboratory September 20, 2012 CX-009353: Categorical Exclusion Determination The Sustainability Workshop (Energy Regional Innovation Cluster) CX(s) Applied: A9 Date: 09/20/2012 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory September 20, 2012 CX-009352: Categorical Exclusion Determination Navy Yard Network Operations Center (Energy Regional Innovation Cluster) CX(s) Applied: A1, A9, B2.2 Date: 09/20/2012 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory September 19, 2012

270

Categorical Exclusion Determinations: National Energy Technology Laboratory  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5, 2010 5, 2010 CX-004434: Categorical Exclusion Determination Geothermal Incentive Program CX(s) Applied: B5.1 Date: 11/05/2010 Location(s): Stonington, Connecticut Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory November 5, 2010 CX-004400: Categorical Exclusion Determination Repair Brick Support Plates on Connecting Bridges - Building 58 CX(s) Applied: B2.3 Date: 11/05/2010 Location(s): Allegheny City, Pennsylvania Office(s): Fossil Energy, National Energy Technology Laboratory November 5, 2010 CX-004399: Categorical Exclusion Determination Mississippi Energy Efficiency Appliance Rebate Program CX(s) Applied: B5.1 Date: 11/05/2010 Location(s): Mississippi Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

271

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 6690 of 28,905 results. 81 - 6690 of 28,905 results. Download CX-005760: Categorical Exclusion Determination F-10 Outfall Stairs/Landing Installation CX(s) Applied: B1.3 Date: 05/04/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005760-categorical-exclusion-determination Download CX-005761: Categorical Exclusion Determination 707-C Storm Drain Repairs CX(s) Applied: B1.3 Date: 05/04/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005761-categorical-exclusion-determination Download CX-005762: Categorical Exclusion Determination Replacement of Critical Fire Hydrants in A-Area CX(s) Applied: B1.3

272

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

01 - 4710 of 26,777 results. 01 - 4710 of 26,777 results. Download CX-005797: Categorical Exclusion Determination Replace Poles 356 and 425 in Forestry (G-Area) CX(s) Applied: B1.3 Date: 04/06/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005797-categorical-exclusion-determination Download CX-005798: Categorical Exclusion Determination Replace Pole 25 Due to Wood Pecker Holes CX(s) Applied: B1.3 Date: 04/06/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005798-categorical-exclusion-determination Download CX-005799: Categorical Exclusion Determination Repair of Fire Water Line Near 254-13F CX(s) Applied: B1.3

273

Categorical Exclusion Determinations: B1.3 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

July 31, 2013 July 31, 2013 CX-010843: Categorical Exclusion Determination Subcontractor Repair of Roof Leak in Rm. F45 at 703-1B CX(s) Applied: B1.3 Date: 07/31/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office July 31, 2013 CX-010732: Categorical Exclusion Determination 2013 Spokane District Wood pole Replacement Projects CX(s) Applied: B1.3 Date: 07/31/2013 Location(s): Washington, Washington, Washington, Washington, Idaho Offices(s): Bonneville Power Administration July 31, 2013 CX-010840: Categorical Exclusion Determination Place Old A-Cell Block Crane in Sealand Container for Disposal CX(s) Applied: B1.3 Date: 07/31/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office July 31, 2013 CX-010884: Categorical Exclusion Determination

274

Categorical Exclusion Determinations: Savannah River Operations Office |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

July 31, 2013 July 31, 2013 CX-010844: Categorical Exclusion Determination Subcontractor Repair of Leak Over Entry Door #1 at 703-B CX(s) Applied: B1.3 Date: 07/31/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office July 30, 2013 CX-010846: Categorical Exclusion Determination Install Stud, Shims, and Nut in the L-Basin 70-Ton Cask Lid Support Structure CX(s) Applied: B2.5 Date: 07/30/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office July 23, 2013 CX-010850: Categorical Exclusion Determination Install Well Pump into the F-Tank Farm Catch Tank FL-241901-WTS-TK-1 CX(s) Applied: B1.3 Date: 07/23/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office July 23, 2013 CX-010849: Categorical Exclusion Determination

275

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

41 - 27450 of 28,904 results. 41 - 27450 of 28,904 results. Download CX-008619: Categorical Exclusion Determination Roof Repair at 105-C Disassembly CX(s) Applied: B1.3 Date: 06/22/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-008619-categorical-exclusion-determination Download CX-008620: Categorical Exclusion Determination F-Tank Farm Sump Pump and Discharge Piping CX(s) Applied: B1.3 Date: 06/22/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-008620-categorical-exclusion-determination Download CX-008621: Categorical Exclusion Determination Replace 766-H Deteriorated Grease Trap CX(s) Applied: B1.3 Date: 06/21/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office

276

Categorical Exclusion Determinations: B1.3 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

February 22, 2011 February 22, 2011 CX-005372: Categorical Exclusion Determination Repair Bayou Choctaw Timber Pipe Supports CX(s) Applied: B1.3 Date: 02/22/2011 Location(s): Bayou Choctaw, Louisiana Office(s): Strategic Petroleum Reserve Field Office February 22, 2011 CX-005371: Categorical Exclusion Determination West Hackberry Off-Site Services Contract, 2011-2013 CX(s) Applied: B1.3 Date: 02/22/2011 Location(s): West Hackberry, Texas Office(s): Strategic Petroleum Reserve Field Office February 22, 2011 CX-005370: Categorical Exclusion Determination Clean and Inspect West Hackberry (WHT-14) Brine Tank CX(s) Applied: B1.3 Date: 02/22/2011 Location(s): West Hackberry, Louisiana Office(s): Strategic Petroleum Reserve Field Office February 22, 2011 CX-005369: Categorical Exclusion Determination

277

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 5, 2011 December 5, 2011 CX-007511: Categorical Exclusion Determination Record of Categorical Exclusion for Repair Erosion Problems at Big Hill Raw Water Intake Structure CX(s) Applied: B1.3 Date: 12/05/2011 Location(s): Texas Offices(s): Strategic Petroleum Reserve Field Office December 5, 2011 CX-007789: Categorical Exclusion Determination Associated Electric Cooperative, Inc. Substation Improvements CX(s) Applied: B4.6 Date: 12/05/2011 Location(s): Missouri Offices(s): Southwestern Power Administration December 5, 2011 CX-007390: Categorical Exclusion Determination Hot Carrier Collection in Thin Film Silicon with Tailored Nanocrystalline/Amorphous Structure CX(s) Applied: B3.15, A9, B3.6 Date: 12/05/2011 Location(s): Colorado Offices(s): Golden Field Office December 5, 2011

278

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2, 2009 2, 2009 CX-000393: Categorical Exclusion Determination Carbon Capture and Sequestration (by Enhanced Oil Recovery) Project Phase 1 CX(s) Applied: A1, A9, B3.1 Date: 11/12/2009 Location(s): Austin, Texas Office(s): Fossil Energy, National Energy Technology Laboratory November 12, 2009 CX-004894: Categorical Exclusion Determination Peacock Substation Washed Out Area Repair CX(s) Applied: B1.3 Date: 11/12/2009 Location(s): Mohave County, Arizona Office(s): Western Area Power Administration-Desert Southwest Region November 12, 2009 CX-000394: Categorical Exclusion Determination Carbon Capture and Sequestration (by Enhance Oil Recovery) Project Phase 1 CX(s) Applied: A1, A9, B3.1 Date: 11/12/2009 Location(s): Texas City, Texas Office(s): Fossil Energy, National Energy Technology Laboratory

279

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

41 - 25650 of 31,917 results. 41 - 25650 of 31,917 results. Download CX-005760: Categorical Exclusion Determination F-10 Outfall Stairs/Landing Installation CX(s) Applied: B1.3 Date: 05/04/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005760-categorical-exclusion-determination Download CX-005761: Categorical Exclusion Determination 707-C Storm Drain Repairs CX(s) Applied: B1.3 Date: 05/04/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005761-categorical-exclusion-determination Download CX-005762: Categorical Exclusion Determination Replacement of Critical Fire Hydrants in A-Area CX(s) Applied: B1.3

280

Categorical Exclusion Determinations: Savannah River Operations Office |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Savannah River Operations Savannah River Operations Office Categorical Exclusion Determinations: Savannah River Operations Office Categorical Exclusion Determinations issued by Savannah River Operations Office. DOCUMENTS AVAILABLE FOR DOWNLOAD September 10, 2013 CX-010669: Categorical Exclusion Determination 484-17D Coal Yard Remediation CX(s) Applied: B6.1 Date: 06/07/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office August 1, 2013 CX-010837: Categorical Exclusion Determination Disassembly, Relocation, and Reassembly of a Metal-framed Quonset Hut CX(s) Applied: B1.22 Date: 08/01/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office August 1, 2013 CX-010836: Categorical Exclusion Determination Subcontractor Roof Repair at 717-12S CX(s) Applied: B1.3

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Categorical Exclusion Determinations: Arkansas | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Arkansas Arkansas Categorical Exclusion Determinations: Arkansas Location Categorical Exclusion Determinations issued for actions in Arkansas. DOCUMENTS AVAILABLE FOR DOWNLOAD September 16, 2010 CX-003909: Categorical Exclusion Determination Emergency Levee, Bank, and Drainage Repairs CX(s) Applied: B2.5 Date: 09/16/2010 Location(s): Craighead County, Arkansas Office(s): Southwestern Power Administration September 13, 2010 CX-003762: Categorical Exclusion Determination Arkansas-County-Pulaski CX(s) Applied: B1.32, B2.5, B5.1 Date: 09/13/2010 Location(s): Pulaski County, Arkansas Office(s): Energy Efficiency and Renewable Energy September 8, 2010 CX-003788: Categorical Exclusion Determination Arkansas Appliance Rebate Program CX(s) Applied: A9, B5.1 Date: 09/08/2010 Location(s): Arkansas

282

FE Categorical Exclusions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

February 12, 2010 February 12, 2010 CX-002614: Categorical Exclusion Determination Research and Education of Carbon Dioxide Separation from Coal Combustion Flue Gases with Regenerable Magnesium Solutions CX(s) Applied: B3.1, A9 Date: 02/12/2010 Location(s): Cincinnati, Ohio Office(s): Fossil Energy, National Energy Technology Laboratory February 12, 2010 CX-000779: Categorical Exclusion Determination Hardgrove Grindability Index (HGI) Building 83 CX(s) Applied: B3.6 Date: 02/12/2010 Location(s): Pittsburgh, Pennsylvania Office(s): Fossil Energy, National Energy Technology Laboratory February 11, 2010 CX-000873: Categorical Exclusion Determination Clean, Inspect, and Repair BMT-27 CX(s) Applied: B1.3 Date: 02/11/2010 Location(s): Texas Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office

283

Categorical Exclusion Determinations: Colorado | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

May 18, 2012 May 18, 2012 CX-008766: Categorical Exclusion Determination Asphalt Repair and Concrete Work Activities at the Grand Junction, Colorado, Disposal Site CX(s) Applied: B1.3 Date: 05/18/2012 Location(s): Colorado Offices(s): Legacy Management May 15, 2012 CX-008238: Categorical Exclusion Determination Recovery Act: Colorado State Capitol Building Geothermal Program CX(s) Applied: A9, B2.1, B5.19 Date: 05/15/2012 Location(s): Colorado Offices(s): Golden Field Office May 9, 2012 CX-008401: Categorical Exclusion Determination Giant Track Communications Tower Removal CX(s) Applied: B1.19 Date: 05/09/2012 Location(s): Colorado Offices(s): Western Area Power Administration-Rocky Mountain Region May 9, 2012 CX-008381: Categorical Exclusion Determination Big Thompson to Flatiron 13.8 Kilovolt Transmission Line Structure

284

Categorical Exclusion Determinations: B1.3 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 4, 2010 March 4, 2010 CX-001134: Categorical Exclusion Determination Repair Water Leak in L-Area Valve 075 CX(s) Applied: B1.3 Date: 03/04/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office March 4, 2010 CX-001129: Categorical Exclusion Determination Cut and Cap Firewater Line Tap-Off Near 714-7N CX(s) Applied: B1.3 Date: 03/04/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office March 3, 2010 CX-001185: Categorical Exclusion Determination Replace Spacer Dampers Along the Wautoma-Rock Creek Number 1 500 Kilovolt Transmission Line CX(s) Applied: B1.3 Date: 03/03/2010 Location(s): Benton County, Yakima County, Office(s): Bonneville Power Administration March 2, 2010

285

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2, 2009 2, 2009 CX-001125: Categorical Exclusion Determination Blading of Washed Out Access Road and Repairing the Washed Out Area Inside the Substation Fence CX(s) Applied: B1.3 Date: 11/12/2009 Location(s): Mohave County, Arizona Office(s): Western Area Power Administration-Desert Southwest Region November 12, 2009 CX-000383: Categorical Exclusion Determination Cemex Commercial-Scale Carbon Dioxide Capture and Sequestration for the Cement Industry CX(s) Applied: A1, A9, B3.1 Date: 11/12/2009 Location(s): Odessa, Texas Office(s): Fossil Energy, National Energy Technology Laboratory November 12, 2009 CX-000382: Categorical Exclusion Determination Cemex Commercial-Scale Carbon Dioxide Capture and Sequestration for the Cement Industry CX(s) Applied: A1, A9, B3.6 Date: 11/12/2009

286

Categorical Exclusion Determinations: B6.1 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

23, 2010 23, 2010 CX-003924: Categorical Exclusion Determination Delineation, Identification, Characterization, and Clean Up of Suspected Waste Area CX(s) Applied: B3.1, B6.1 Date: 09/23/2010 Location(s): Pittsburgh, Pennsylvania Office(s): Fossil Energy, National Energy Technology Laboratory September 3, 2010 CX-003961: Categorical Exclusion Determination N-Area Resource Conservation and Recovery Act Closure Activities CX(s) Applied: B6.1 Date: 09/03/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office September 2, 2010 CX-003826: Categorical Exclusion Determination Project 1712 Repair OF002 Cured-in-Place Pipe Liner Near AICO Inlet CX(s) Applied: B6.1 Date: 09/02/2010 Location(s): Kansas Office(s): Kansas City Site Office, NNSA-Headquarters

287

Categorical Exclusion Determinations: B1.3 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

April 4, 2013 April 4, 2013 CX-010095: Categorical Exclusion Determination Casa Grande Substation, CAG 262 Breaker Replacement CX(s) Applied: B1.3 Date: 04/04/2013 Location(s): Arizona Offices(s): Western Area Power Administration-Desert Southwest Region April 1, 2013 CX-010106: Categorical Exclusion Determination Flaming Gorge Microwave Site Communications Building Access Road Repairs CX(s) Applied: B1.3 Date: 04/01/2013 Location(s): Utah Offices(s): Western Area Power Administration-Rocky Mountain Region March 26, 2013 CX-010105: Categorical Exclusion Determination Urban Transmission Line Danger Tree Management CX(s) Applied: B1.3 Date: 03/26/2013 Location(s): Colorado, Colorado, Colorado, Colorado, Wyoming Offices(s): Western Area Power Administration-Rocky Mountain Region

288

Categorical Exclusion Determinations: Savannah River Operations Office |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

October 3, 2011 October 3, 2011 CX-006944: Categorical Exclusion Determination Remove Insulation from High Point Flush Pump Drain Valve CX(s) Applied: B1.3 Date: 10/03/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, National Energy Technology Laboratory September 29, 2011 CX-006946: Categorical Exclusion Determination Operation of Accredited Industrial Hygiene (IH) Laboratory in Building 772-F, Revision 1 CX(s) Applied: B3.6 Date: 09/29/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, National Energy Technology Laboratory September 28, 2011 CX-006955: Categorical Exclusion Determination Repair Radiological Fixative Coatings in F Tank Farm CX(s) Applied: B1.3 Date: 09/28/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Sandia Site Office

289

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7, 2012 7, 2012 CX-009327: Categorical Exclusion Determination Gas Hydrate Dynamics on the Alaskan Beaufort Continental Slope: Modeling and Field Characterization CX(s) Applied: A9 Date: 09/27/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory September 26, 2012 CX-009434: Categorical Exclusion Determination Deployable Commercial Rooftop Solar Electric System CX(s) Applied: B5.15 Date: 09/26/2012 Location(s): New York Offices(s): Golden Field Office September 26, 2012 CX-009169: Categorical Exclusion Determination Virgin Islands State Energy Program CX(s) Applied: A9, A11 Date: 09/26/2012 Location(s): Virgin Islands Offices(s): Golden Field Office September 26, 2012 CX-009331: Categorical Exclusion Determination High Resolution 3D Laser Imaging for Inspection, Maintenance, Repair and

290

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2013 1, 2013 CX-010818: Categorical Exclusion Determination Technology Integration Program - Field Trial - Site Three CX(s) Applied: B3.1 Date: 08/01/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory August 1, 2013 CX-010833: Categorical Exclusion Determination Subcontractor Will Clean Out Gutters Causing Leaks in 706-N CX(s) Applied: B1.3 Date: 08/01/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office August 1, 2013 CX-010832: Categorical Exclusion Determination Subcontractor Will Perform Roof Leak Repairs on 717-8N CX(s) Applied: B1.3 Date: 08/01/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office August 1, 2013 CX-010817: Categorical Exclusion Determination Technology Integration Program - Field Trial - Site Three

291

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

91 - 27400 of 28,560 results. 91 - 27400 of 28,560 results. Download CX-007772: Categorical Exclusion Determination Idaho National Laboratory Asphalt Repair Project - North Wind Services, LLC CX(s) Applied: B1.3 Date: 11/28/2011 Location(s): Idaho Offices(s): Nuclear Energy, Idaho Operations Office http://energy.gov/nepa/downloads/cx-007772-categorical-exclusion-determination Download CX-007787: Categorical Exclusion Determination Line Relocation Project for Farrell Cooper Mining Company CX(s) Applied: B4.13 Date: 01/04/2012 Location(s): Oklahoma Offices(s): Southwestern Power Administration http://energy.gov/nepa/downloads/cx-007787-categorical-exclusion-determination Download CX-007810: Categorical Exclusion Determination 4160 Volt Upgrade Project CX(s) Applied: B1.15, B2.5 Date: 10/05/2011

292

Categorical Exclusion Determinations: Washington | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

August 25, 2010 August 25, 2010 CX-003610: Categorical Exclusion Determination Ross-Lexington Number 1 Access Road Repair Project CX(s) Applied: B1.3 Date: 08/25/2010 Location(s): Cowlitz County, Washington Office(s): Bonneville Power Administration August 25, 2010 CX-003609: Categorical Exclusion Determination Cushman North Fork Skokomish Powerhouse CX(s) Applied: A9 Date: 08/25/2010 Location(s): Tacoma, Washington Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 25, 2010 CX-003614: Categorical Exclusion Determination Badger Canyon Substation Radio Communication Tower Project CX(s) Applied: B1.7, B1.19 Date: 08/25/2010 Location(s): Benton County, Washington Office(s): Bonneville Power Administration August 24, 2010 CX-003613: Categorical Exclusion Determination

293

Categorical Exclusion Determinations: Strategic Petroleum Reserve Field  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

October 31, 2012 October 31, 2012 CX-009509: Categorical Exclusion Determination Power Monitoring, Communication and Control Upgrade at Bryan Mound Degas Plant (Install) CX(s) Applied: B1.7 Date: 10/31/2012 Location(s): Texas Offices(s): Strategic Petroleum Reserve Field Office October 30, 2012 CX-009510: Categorical Exclusion Determination Strategic Petroleum Reserve Emergency Pipeline and Piping Repair, 2013-2017 CX(s) Applied: B5.4 Date: 10/30/2012 Location(s): CX: none Offices(s): Strategic Petroleum Reserve Field Office October 2, 2012 CX-009216: Categorical Exclusion Determination ADAS System Life Cycle Support, 2012-2015 CX(s) Applied: B1.7 Date: 10/02/2012 Location(s): CX: none Offices(s): Strategic Petroleum Reserve Field Office September 24, 2012 CX-009217: Categorical Exclusion Determination

294

Categorical Exclusion Determinations: Idaho | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 28, 2011 November 28, 2011 CX-007772: Categorical Exclusion Determination Idaho National Laboratory Asphalt Repair Project - North Wind Services, LLC CX(s) Applied: B1.3 Date: 11/28/2011 Location(s): Idaho Offices(s): Nuclear Energy, Idaho Operations Office November 22, 2011 CX-007370: Categorical Exclusion Determination Idaho-TRIBE-SHOSHONE-BANNOCK TRIBE OF THE FORT HALL RESERVATION OF IDAHO CX(s) Applied: B2.5, B5.1 Date: 11/22/2011 Location(s): Idaho Offices(s): Energy Efficiency and Renewable Energy November 17, 2011 CX-007364: Categorical Exclusion Determination Provision of Funds to the Kootenai Tribe of Idaho to Purchase the Upper Twin Rivers Conservation Easement CX(s) Applied: B1.25 Date: 11/17/2011 Location(s): Idaho Offices(s): Bonneville Power Administration November 15, 2011

295

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

71 - 20380 of 26,764 results. 71 - 20380 of 26,764 results. Download CX-006661: Categorical Exclusion Determination Repair Flowline at 83-AX-4 CX(s) Applied: B5.2, B5.4 Date: 02/24/2010 Location(s): Casper, Wyoming Office(s): RMOTC http://energy.gov/nepa/downloads/cx-006661-categorical-exclusion-determination Download CX-006799: Categorical Exclusion Determination Energy Efficiency and Renewable Energy Loan/Tech Demo Program - Delphi CX(s) Applied: B5.1 Date: 09/09/2011 Location(s): Auburn Hills, Michigan Office(s): Energy Efficiency and Renewable Energy, Golden Field Office http://energy.gov/nepa/downloads/cx-006799-categorical-exclusion-determination Download CX-006779: Categorical Exclusion Determination Johnson Youth Center Renovation CX(s) Applied: B5.1 Date: 09/09/2011 Location(s): Juneau, Alaska

296

Categorical Exclusion Determinations: South Carolina | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

August 14, 2012 August 14, 2012 CX-009121: Categorical Exclusion Determination Roof Repair at 105-C Disassembly CX(s) Applied: B1.3 Date: 08/14/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office August 14, 2012 CX-009120: Categorical Exclusion Determination Analytical Support for Alternate Feed Stock-2 (AFS-2) CX(s) Applied: B3.6 Date: 08/14/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office August 14, 2012 CX-009119: Categorical Exclusion Determination Well Abandonment and Replacement Well Installation in N-Area CX(s) Applied: B3.1 Date: 08/14/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office August 14, 2012 CX-009118: Categorical Exclusion Determination Sludge Batch 8 Qualification: Washing and Defense Waste Processing Facility

297

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

11 - 19220 of 26,764 results. 11 - 19220 of 26,764 results. Download CX-006719: Categorical Exclusion Determination Casing Drilling Test CX(s) Applied: B1.3, B3.7, B5.12 Date: 05/17/2011 Location(s): Casper, Wyoming Office(s): RMOTC http://energy.gov/nepa/downloads/cx-006719-categorical-exclusion-determination Download CX-006659: Categorical Exclusion Determination Repair Flowline 100 Feet North of 71-3-SX-3 CX(s) Applied: B5.2, B5.4 Date: 02/16/2010 Location(s): Casper, Wyoming Office(s): RMOTC http://energy.gov/nepa/downloads/cx-006659-categorical-exclusion-determination Download CX-000681: Categorical Exclusion Determination Materials and Fuels Complex-Experimental Breeder Reactor-II Sodium Removal/Resource Conservation and Recovery Act Closure Activities CX(s) Applied: B6.1 Date: 01/20/2009

298

Categorical Exclusion Determinations: Savannah River Operations Office |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

May 16, 2011 May 16, 2011 CX-006405: Categorical Exclusion Determination 707-C Storm Drain Repairs CX(s) Applied: B1.3 Date: 05/16/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office May 13, 2011 CX-006406: Categorical Exclusion Determination Silver Chloride Injection at the F Area Hazardous Waste Management Facilities Barrier Wall CX(s) Applied: B6.9 Date: 05/13/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office May 12, 2011 CX-006407: Categorical Exclusion Determination Removal of Inactive Chromate Water Isolation Valves CRW-V-170 and CRW-V-175 and Installation of 3 Inch Blind Flanges for F-area New Hill CX(s) Applied: B1.3 Date: 05/12/2011 Location(s): Aiken, South Carolina

299

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2013 , 2013 CX-010820: Categorical Exclusion Determination Technology Integration Program - Field Trial - Site Three CX(s) Applied: B3.1, B3.6 Date: 08/01/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory August 1, 2013 CX-010837: Categorical Exclusion Determination Disassembly, Relocation, and Reassembly of a Metal-framed Quonset Hut CX(s) Applied: B1.22 Date: 08/01/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office August 1, 2013 CX-010836: Categorical Exclusion Determination Subcontractor Roof Repair at 717-12S CX(s) Applied: B1.3 Date: 08/01/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office August 1, 2013 CX-010819: Categorical Exclusion Determination Technology Integration Program - Field Trial - Site Three

300

Categorical Exclusion Determinations: B1.3 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

July 13, 2010 July 13, 2010 CX-003133: Categorical Exclusion Determination D-Zero Experiment Emergency Generator Fuel Tank Replacement Project CX(s) Applied: B1.3 Date: 07/13/2010 Location(s): Batavia, Illinois Office(s): Fermi Site Office, Science July 12, 2010 CX-003447: Categorical Exclusion Determination Bridge and Access Road Maintenance CX(s) Applied: B1.3 Date: 07/12/2010 Location(s): Snohomish County, Washington Office(s): Bonneville Power Administration July 12, 2010 CX-003137: Categorical Exclusion Determination Repairs to West Hackberry Building 301 Roof CX(s) Applied: B1.3 Date: 07/12/2010 Location(s): West Hackberry, Louisiana Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office July 12, 2010 CX-002979: Categorical Exclusion Determination Oregon Energy Efficiency and Conservation Block Grant Formula - City of

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

11 - 9320 of 28,560 results. 11 - 9320 of 28,560 results. Download CX-006247: Categorical Exclusion Determination Relocation of Bayou Choctaw Helipad CX(s) Applied: B1.3 Date: 06/13/2011 Location(s): Iberville Parish, Louisiana Office(s): Strategic Petroleum Reserve Field Office http://energy.gov/nepa/downloads/cx-006247-categorical-exclusion-determination Download CX-000873: Categorical Exclusion Determination Clean, Inspect, and Repair BMT-27 CX(s) Applied: B1.3 Date: 02/11/2010 Location(s): Texas Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office http://energy.gov/nepa/downloads/cx-000873-categorical-exclusion-determination Download CX-000871: Categorical Exclusion Determination West Hackberry Annual Pressure Safety Valve Testing CX(s) Applied: B1.3 Date: 02/05/2010 Location(s): West Hackberry, Louisiana

302

Applied Energy Management | Open Energy Information  

Open Energy Info (EERE)

Management Management Jump to: navigation, search Name Applied Energy Management Place Huntersville, North Carolina Zip 28078 Sector Efficiency, Renewable Energy Product North Carolina-based, energy efficiency and renewable energy service and construction company. Coordinates 35.409853°, -80.842716° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.409853,"lon":-80.842716,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

303

How to Apply for ENERGY STAR® Certification  

NLE Websites -- All DOE Office Websites (Extended Search)

ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü "How To" Series How to Apply for ENERGY STAR ® Certification Commercial buildings that earn EPA's ENERGY STAR certification perform in the top 25 percent of similar buildings nationwide, as verified by a Licensed Professional (a Professional Engineer or a Registered Architect). ENERGY STAR certified buildings use an average of 35 percent less energy and are responsible for 35 percent fewer greenhouse gas emissions than average buildings. To qualify for the ENERGY STAR, a property must achieve an ENERGY STAR score of 75 or higher on EPA's 1 - 100 scale, which compares a property's energy performance to

304

FY 1990 Applied Sciences Branch annual report  

DOE Green Energy (OSTI)

The Applied Sciences Branch actively supports the advancement of DOE/SERI goals for the development and implementation of the solar photovoltaic technology. The primary focus of the laboratories is to provide state-of-the-art analytical capabilities for materials and device characterization and fabrication. The branch houses a comprehensive facility which is capable of providing information on the full range of photovoltaic components. A major objective of the branch is to aggressively pursue collaborative research with other government laboratories, universities, and industrial firms for the advancement of photovoltaic technologies. Members of the branch disseminate research findings to the technical community in publications and presentations. This report contains information on surface and interface analysis, materials characterization, development, electro-optical characterization module testing and performance, surface interactions and FTIR spectroscopy.

Keyes, B.M.; Dippo, P.C. (eds.)

1991-11-01T23:59:59.000Z

305

Navigating without vision: Basic and applied research  

E-Print Network (OSTI)

ABSTRACT: We describe some of the results of our program of basic and applied research on navigating without vision. One basic research topic that we have studied extensively is path integration, a form of navigation in which perceived self-motion is integrated over time to obtain an estimate of current posilion and orientation. In experiments on pathway completion, one test of path integration ability, we have found that subjects who are passively guided over the outbound path without vision exhibit significant errors when attempting to return to the origin but are nevertheless sensitive to turns and segment lengths in the stimulus path. We have also found no major differences in path inlegration ability among blirid and sighted populations. A model we havc developed that attributes errors in path integration to errors in encoding the stimulus path is a good beginning toward understanding path integration performance. In otber research on path integration, in which optic flow information was manipulated in addition to the proprioceptive and vestibular information of nonvisual locomotion, we havc found that optic flow is a weak input to the path integration process. In other basic research, our studies of auditory distance perception in outdoor environments show systematic underestimation oC sound source distance. Our applied research has been concerned with developing and evaluating a navigation system for the visually impaired that uses three recent technologies: the Global Positioning System, Geographic Information Systems, and virtual acouslics. Our work shows that there is considerable promise of these three technologies in allowing visually impaired individuals to navigate and learn about unfamiliar environments without the assistance of human guides. (Optoni Vis Sci 2001;78:282-289)

Jack M. Loomis; Roberta L. Klatzky; Reginald G. Golledge

2001-01-01T23:59:59.000Z

306

DNA repair decline during mouse spermiogenesis results in the accumulation of heritable DNA damage  

Science Conference Proceedings (OSTI)

The post-meiotic phase of mouse spermatogenesis (spermiogenesis) is very sensitive to the genomic effects of environmental mutagens because as male germ cells form mature sperm they progressively lose the ability to repair DNA damage. We hypothesized that repeated exposures to mutagens during this repair-deficient phase result in the accumulation of heritable genomic damage in mouse sperm that leads to chromosomal aberrations in zygotes after fertilization. We used a combination of single or fractionated exposures to diepoxybutane (DEB), a component of tobacco smoke, to investigate how differential DNA repair efficiencies during the three weeks of spermiogenesis affected the accumulation of DEB-induced heritable damage in early spermatids (21-15 days before fertilization, dbf), late spermatids (14-8 dbf) and sperm (7- 1 dbf). Analysis of chromosomalaberrations in zygotic metaphases using PAINT/DAPI showed that late spermatids and sperm are unable to repair DEB-induced DNA damage as demonstrated by significant increases (P<0.001) in the frequencies of zygotes with chromosomal aberrations. Comparisons between single and fractionated exposures suggested that the DNA repair-deficient window during late spermiogenesis may be less than two weeks in the mouse and that during this repair-deficient window there is accumulation of DNA damage in sperm. Finally, the dose-response study in sperm indicated a linear response for both single and repeated exposures. These findings show that the differential DNA repair capacity of post-meioitic male germ cells has a major impact on the risk of paternally transmitted heritable damage and suggest that chronic exposures that may occur in the weeks prior to fertilization because of occupational or lifestyle factors (i.e, smoking) can lead to an accumulation of genetic damage in sperm and result in heritable chromosomal aberrations of paternal origin.

Marchetti, Francesco; Marchetti, Francesco; Wryobek, Andrew J

2008-02-21T23:59:59.000Z

307

DNA Repair Decline During Mouse Spermiogenesis Results in the Accumulation of Heritable DNA Damage  

Science Conference Proceedings (OSTI)

The post-meiotic phase of mouse spermatogenesis (spermiogenesis) is very sensitive to the genomic effects of environmental mutagens because as male germ cells form mature sperm they progressively lose the ability to repair DNA damage. We hypothesized that repeated exposures to mutagens during this repair-deficient phase result in the accumulation of heritable genomic damage in mouse sperm that leads to chromosomal aberrations in zygotes after fertilization. We used a combination of single or fractionated exposures to diepoxybutane (DEB), a component of tobacco smoke, to investigate how differential DNA repair efficiencies during the three weeks of spermiogenesis affected the accumulation of DEB-induced heritable damage in early spermatids (21-15 days before fertilization, dbf), late spermatids (14-8 dbf) and sperm (7-1 dbf). Analysis of chromosomal aberrations in zygotic metaphases using PAINT/DAPI showed that late spermatids and sperm are unable to repair DEB-induced DNA damage as demonstrated by significant increases (P<0.001) in the frequencies of zygotes with chromosomal aberrations. Comparisons between single and fractionated exposures suggested that the DNA repair-deficient window during late spermiogenesis may be less than two weeks in the mouse and that during this repair-deficient window there is accumulation of DNA damage in sperm. Finally, the dose-response study in sperm indicated a linear response for both single and repeated exposures. These findings show that the differential DNA repair capacity of post-meioitic male germ cells has a major impact on the risk of paternally transmitted heritable damage and suggest that chronic exposures that may occur in the weeks prior to fertilization because of occupational or lifestyle factors (i.e, smoking) can lead to an accumulation of genetic damage in sperm and result in heritable chromosomal aberrations of paternal origin.

Marchetti, Francesco; Marchetti, Francesco; Wyrobek, Andrew J.

2007-12-01T23:59:59.000Z

308

Gas Turbine Repair Guideline: GE 6FA/FA+e, Volume 19: GE MS6001 Model FA/FA+e  

Science Conference Proceedings (OSTI)

For more than a decade, the Electric Power Research Institute (EPRI) has been developing gas turbine hot section component repair and coating guidelines to assist utilities in the refurbishment of these critical and expensive parts. Utilities, generators, and repair vendors have used these guidelines to perform repairs on blades, turbine vanes, and combustion hardware. Guidelines now exist for a variety of conventional and advanced General Electric, Siemens/Westinghouse, Alstom, and Mitsubishi heavy ...

2013-12-11T23:59:59.000Z

309

201/span>3 Short Course Applied Fundamentals in Interfacial Phenomena  

Science Conference Proceedings (OSTI)

Applied Fundamentals in Interfacial Phenomena Short Course held at the 104th AOCS Annual Meeting and Expo. 201/span>3 Short Course Applied Fundamentals in Interfacial Phenomena Applied Fundamentals in Interfacial Phenomena Saturday •

310

Development of a rapid design procedure for emergency repair of bridge columns using fiber-reinforced polymers  

E-Print Network (OSTI)

with success including wet layup, winding with wet tow orthen installed; whereas, wet layup based fabrication of FRPfor emergency repair. FRP wet layup also allows for ease of

Slater, Susan E.

2008-01-01T23:59:59.000Z

311

Effect of laser e LED radiations associated or not on dorsal cutaneous wound repair in a rodent model: histologic study.  

E-Print Network (OSTI)

??The aim of the present investigation was to evaluate histologically tissue repair on dorsal cutaneous wounds in a rodent model treated with Laser and/or LED,… (more)

Ana Paula Cavalcanti de Sousa

2008-01-01T23:59:59.000Z

312

WHERE MULTIFUNCTIONAL DNA REPAIR PROTEINS MEET: MAPPING THE INTERACTION DOMAINS BETWEEN XPG AND WRN  

Science Conference Proceedings (OSTI)

The rapid recognition and repair of DNA damage is essential for the maintenance of genomic integrity and cellular survival. Multiple complex and interconnected DNA damage responses exist within cells to preserve the human genome, and these repair pathways are carried out by a specifi c interplay of protein-protein interactions. Thus a failure in the coordination of these processes, perhaps brought about by a breakdown in any one multifunctional repair protein, can lead to genomic instability, developmental and immunological abnormalities, cancer and premature aging. This study demonstrates a novel interaction between two such repair proteins, Xeroderma pigmentosum group G protein (XPG) and Werner syndrome helicase (WRN), that are both highly pleiotropic and associated with inherited genetic disorders when mutated. XPG is a structure-specifi c endonuclease required for the repair of UV-damaged DNA by nucleotide excision repair (NER), and mutations in XPG result in the diseases Xeroderma pigmentosum (XP) and Cockayne syndrome (CS). A loss of XPG incision activity results in XP, whereas a loss of non-enzymatic function(s) of XPG causes CS. WRN is a multifunctional protein involved in double-strand break repair (DSBR), and consists of 3’–5’ DNA-dependent helicase, 3’–5’ exonuclease, and single-strand DNA annealing activities. Nonfunctional WRN protein leads to Werner syndrome, a premature aging disorder with increased cancer incidence. Far Western analysis was used to map the interacting domains between XPG and WRN by denaturing gel electrophoresis, which separated purifi ed full length and recombinant XPG and WRN deletion constructs, based primarily upon the length of each polypeptide. Specifi c interacting domains were visualized when probed with the secondary protein of interest which was then detected by traditional Western analysis using the antibody of the secondary protein. The interaction between XPG and WRN was mapped to the C-terminal region of XPG as well as the C-terminal region of WRN. The physical interaction between XPG and WRN links NER, (made evident by the disease XP) with DSBR, which imparts additional knowledge of the overlapping nature of these two proteins and the previously distinct DNA repair pathways they are associated with. Since genomic integrity is constantly threatened by both endogenous and exogenous (internal and external) damage, understanding the roles of these proteins in coordinating DNA repair processes with replication will signifi cantly further understanding how defects instigate physiological consequences in response to various DNA damaging sources. This ultimately contributes to our understanding of cancer and premature aging.

Rangaraj, K.; Cooper, P.K.; Trego, K.S.

2009-01-01T23:59:59.000Z

313

Remediation of Mercury and Industrial Contaminants Applied Field...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Remediation of Mercury and Industrial Contaminants Applied Field Research Initiative (RoMIC-AFRI) Remediation of Mercury and Industrial Contaminants Applied Field Research...

314

Computational Advances in Applied Energy | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advances in Applied Energy Computational Advances in Applied Energy Friedmann-LLNL-SEAB.10.11.pdf More Documents & Publications Director's Perspective by George Miller...

315

Attenuation-Based Remedies in the Subsurface Applied Field Research...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Subsurface Applied Field Research Initiative (ABRS AFRI) Located at the Savannah River Site in Aiken, South Carolina, the Attenuation-Based Remedies in the Subsurface Applied...

316

Applying Climate Information for Adaptation Decision-Making:...  

Open Energy Info (EERE)

Applying Climate Information for Adaptation Decision-Making: A Guidance and Resource Document Jump to: navigation, search Tool Summary Name: Applying Climate Information for...

317

Applying physics, teamwork to fusion energy science | Princeton...  

NLE Websites -- All DOE Office Websites (Extended Search)

Applying physics, teamwork to fusion energy science American Fusion News Category: Massachusetts Institute of Technology (MIT) Link: Applying physics, teamwork to fusion energy...

318

Enhancement of DNA repair capacity of mammalian cells by carcinogen treatment  

SciTech Connect

To determine whether DNA excision repair is enhanced in mammalian cells in response to DNA damage, as it is in bacteria as part of the SOS response, we used an expression vector-host cell reactivation assay to measure cellular DNA repair capacity. When UV-damaged chloramphenicol acetyltransferase (CAT) vector DNA was introduced into monkey cells (CV-1), the level of CAT activity was inversely related to the UV fluence due to inhibition of CAT gene expression by UV photoproducts. When CV-1 cells were treated with either UV radiation or mitomycin C, 24-48 h before transfection, CAT expression from the UV-irradiated plasmid was increased. This increase also occurred in a line of normal human cells, but not in repair-deficient human xeroderma pigmentosum cells. We confirmed that this increase in CAT expression was due to repair, and not to production of damage-free templates by recombination; the frequency of generation of supF+ recombinants after transfection with UV-irradiated pZ189 vectors carrying different point mutations in the supF gene did not significantly increase in carcinogen-treated CV-1 cells. From these results we conclude that carcinogen treatment enhances the excision-repair capacity of normal mammalian cells.

Protic, M.; Roilides, E.; Levine, A.S.; Dixon, K.

1988-07-01T23:59:59.000Z

319

Microsoft PowerPoint - Bull Shoals U1 repair MSB edit 3.ppt  

NLE Websites -- All DOE Office Websites (Extended Search)

Bull Shoals Unit 1 161kV Bull Shoals Unit 1 161kV Switchyard Feeder Repair Bull Shoals Unit 1 161kV Bull Shoals Unit 1 161kV Switchyard Feeder Repair Switchyard Feeder Repair Mark Dixson Little Rock District US Army Corps US Army Corps of Engineers of Engineers ® ® One Corps Serving The Army and the Nation * Original Equipment - 52 years old. * Unit 1 Oil filled cable pothead failed and exploded on Sept 6 2006. * Resulting fire and fire suppression damaged oil insulated cable system * Minor damage to power plant. Background Background Background US Army Corps US Army Corps of Engineers of Engineers ® ® One Corps Serving The Army and the Nation * Transformer Unit 2 damaged and removed from service. * Cause of fire - Failure of Pothead stress cone assembly and build up of combustible gas * Power Plant lost all power and went in the

320

The Role of DNA double-strand break repair in cellular response to low  

NLE Websites -- All DOE Office Websites (Extended Search)

DNA double-strand break repair in cellular response to low DNA double-strand break repair in cellular response to low dose radiation exposure. David J. Chen Division of Molecular Radiation Biology, Department of Radiation Oncology, University of Texas Southwestern Medical Center, Dallas TX 75390 It has been assumed that molecular pathways that involved in the biological response for low dose of radiation should be similar to those for high dose radiation in general. The low dose-rate effect and DNA double-strand break repair are inextricably linked in mammalian cells. It has been reported that mammalian mutant cells deficient in nonhomologous end join (NHEJ) pathway have little or no cellular recovery when expose to low-dose-rate radiation. Recently, it has also been reported that cells deficient in

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Emailed Comments of Elizabeth Chimento RE: Pepco Scheduled Line Repair Dec.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Emailed Comments of Elizabeth Chimento RE: Pepco Scheduled Line Emailed Comments of Elizabeth Chimento RE: Pepco Scheduled Line Repair Dec. 1-20, 2006 Emailed Comments of Elizabeth Chimento RE: Pepco Scheduled Line Repair Dec. 1-20, 2006 Docket No. EO-05-01. Regarding the planned line outage, scheduled for Feb. 20 through Mar. 6, I am requesting that the residents near the plant be moved for the duration of the outage to protect their health. Emailed Comments of Elizabeth Chimento RE: Pepco Scheduled Line Repair Dec. 1-20, 2006 More Documents & Publications Letter from Elizabeth Chimento and Poul Hertel to the Federal Energy Regulatory Commission Re: District of Columbia Public Service Commission Emergency Petition and Complaint Docket No. EL05-145-000 Re: Potomac River Generating Station Department of Energy Case No.

322

Evaluation of bisphenol E cyanate ester for the resin-injection repair of advanced composites  

SciTech Connect

This thesis is a compilation of a general introduction and literature review that ties together the subsequent chapters which consist of two journal articles that have yet to be submitted for publication. The overall topic relates to the evaluation and application of a new class of cyanate ester resin with unique properties that lend it applicable to use as a resin for injection repair of high glass transition temperature polymer matrix composites. The first article (Chapter 2) details the evaluation and optimization of adhesive properties of this cyanate ester and alumina nanocomposites under different conditions. The second article (Chapter 3) describes the development and evaluation of an injection repair system for repairing delaminations in polymer matrix composites.

Wilber Yaote Lio

2009-12-19T23:59:59.000Z

323

MAINTENANCE SHOP The shop manager, Clint Steffan has over 25 years experience in Electronic design, test, and repair in  

E-Print Network (OSTI)

MAINTENANCE SHOP The shop manager, Clint Steffan has over 25 years experience in Electronic design the capability of repairing most electronic, mechanical and electro-mechanical equipment, including refrigeration source for parts instead of buying from equipment manufacturer. Repair/recharge small refrigeration

Lajeunesse, Marc J.

324

DNA repair in cells sensitive and resistant to cis-diamminedichloroplatinum(II): Host cell reactivation of damaged plasmid DNA  

SciTech Connect

cis-Diamminedichloroplatinum(II) (cis-DDP) has a broad clinical application as an effective anticancer drug. However, development of resistance to the cytotoxic effects is a limiting factor. In an attempt to understand the mechanism of resistance, the authors have employed a host cell reactivation assay of DNA repair using a cis-DDP-damaged plasmid vector. The efficiency of DNA repair was assayed by measuring the activity of an enzyme coded for by the plasmid vector. The plasmid expression vector pRSV cat contains the bacterial gene coding for chloramphenicol acetyltransferase (CAT) in a configuration which permits expression in mammalian cells. The plasmid was transfected into repair-proficient and -deficient Chinese hamster ovary cells, and CAT activity was subsequently measured in cell lysates. In the repair-deficient cells, one cis-DDP adduct per cat gene was sufficient to eliminate expression. An equivalent inhibition of CAT expression in the repair-proficient cells did not occur until about 8 times the amount of damage was introduced into the plasmid. These results implicate DNA intrastrand cross-links as the lesions responsible for the inhibition of CAT expression. This assay was used to investigate the potential role of DNA repair in mediating cis-DDP resistance in murine leukemia L1210 cells. The assay readily detects the presence or absence of repair and confirms that these resistant L1210 cells have an enhanced capacity for repair of cis-DDP-induced intrastrand cross-links.

Sheibani, N.; Jennerwein, M.M.; Eastman, A. (Univ. of Nebraska Medical Center, Omaha (USA))

1989-04-04T23:59:59.000Z

325

Welding and Repair Technology Center: Gas Metal Arc Welding Lessons  

Science Conference Proceedings (OSTI)

Modern gas metal arc welding (GMAW) systems no longer operate with a symmetric, fixed pulse. The new systems have closed-loop feedback and are waveform-controlled systems that vary the arc characteristics hundreds of times per second to stabilize the arc. The main advantage of these systems is the ease of operation when manual applications are required or out-of-position welding is applied. The systems allow flexibility in the stand-off distance (contact tip to work distance) while maintaining an ...

2013-09-30T23:59:59.000Z

326

Development of a Special Application Coiled Tubing Applied Plug for Geothermal Well Casing Remediation  

DOE Green Energy (OSTI)

Casing deformation in producing geothermal wells is a common problem in many geothermal fields, mainly due to the active geologic formations where these wells are typically located. Repairs to deformed well casings are necessary to keep the wells in production and to occasionally enter a well for approved plugging and abandonment procedures. The costly alternative to casing remediation is to drill a new well to maintain production and/or drill a well to intersect the old well casing below the deformation for abandonment purposes. The U.S. Department of Energy and the Geothermal Drilling Organization sponsored research and development work at Sandia National Laboratories in an effort to reduce these casing remediation expenditures. Sandia, in cooperation with Halliburton Energy Services, developed a low cost, bridge-plug-type, packer for use in casing remediation work in geothermal well environments. This report documents the development and testing of this commercially available petal-basket packer called the Special Application Coiled Tubing Applied Plug (SACTAP).

STALLER,GEORGE E.; KNUDSEN,STEVEN D.; SATTLER,ALLAN R.

1999-10-01T23:59:59.000Z

327

The Effect of Price Expectations on Auto-Repair Price Quotes  

E-Print Network (OSTI)

We show that price expectations alter outcomes in a negotiated price environment. By experimentally manipulating the price expectations that consumers communicate to firms, we show that consumers ’ price expectations alter outcomes by directly changing firms ’ behavior. We implement a large-scale field experiment in which callers request price quotes from automotive repair shops. We find that repair shops quote higher prices if they know that callers ’ perception of the market price is high. We find that women are quoted higher prices than men when callers signal that they are uninformed about market prices. However, gender differences disappear when callers mention an expected price for the repair. Finally, we find that repair shops are more likely to offer In an environment in which prices customarily are negotiated, it can be difficult and time-consuming for consumers to gather enough information to create a good estimate of the market price. This phenomenon is common to many industries: buying a car entails lengthy negotiations in which dealers want to know about a consumer’s current vehicle, her financing preferences, the available

Meghan R. Busse; Florian Zettelmeyer

2012-01-01T23:59:59.000Z

328

Osteochondral defect repair using a novel tissue engineering approach: Sheep model study  

Science Conference Proceedings (OSTI)

Porous calcium polyphosphate (CPP) constructs of desired density were formed by sintering CPP powders. Articular cartilage was formed on these constructs in cell culture over an 8-week period with the resulting cartilage layer forming on the CPP surface ... Keywords: Articular cartilage repair, implants, in vitro and in vivo studies, osteochondral implants, porous calcium polyphosphate, tissue engineering, tissue ingrowth

R. M. Pilliar; R. A. Kandel; M. D. Grynpas; P. Zalzal; M. Hurtig

2007-01-01T23:59:59.000Z

329

Simulation and validation of repair welding and heat treatment of an alloy 718 plate  

Science Conference Proceedings (OSTI)

This paper describes simulation of repair welding and heat treatment together with measurements for validation. The possibility to replace global heat treatment with local using induction heating is evaluated with respect to obtained residual stresses. ... Keywords: Dislocation density based plasticity model, Finite element simulation, Heat treatment, Induction heating, Residual stress measurement

M. Fisk; A. LundbäCk

2012-10-01T23:59:59.000Z

330

A key-based coordination algorithm for dynamic readiness and repair service coordination  

Science Conference Proceedings (OSTI)

This paper describes an agent application for the coordination of air-craft repair, refit, refuel, and rearm teams in a dynamic setting. The paper also presents a new algorithm for dynamic distributed service team coordination and compares its performance ... Keywords: TAEMS, coordination, dynamic, intelligent agents, multi-agent systems, real-time, teams

Tom Wagner; Valerie Guralnik; John Phelps

2003-07-01T23:59:59.000Z

331

Evaluation of Hardware and Procedures for Astronaut Assembly and Repair of Large Precision Reflectors  

Science Conference Proceedings (OSTI)

A detailed procedure is presented that enables astronauts in extravehicular activity (EVA) to efficiently assemble and repair large (i.e., greater than 10m-diameter) segmented reflectors, supported by a truss, for space-based optical or radio-frequency ...

Lake Mark S.; Jr Walter L. Heard; Watson Judith J.; Collins Timothy J.

2000-08-01T23:59:59.000Z

332

Overview of NCHRP Design Guideline for EPS-Block Geofoam in Slope Stabilization and Repair  

E-Print Network (OSTI)

Manhattan College Bronx, New York 10471 Tel: (718) 826-7177 E-mail: john.horvath@manhattan.edu Dov and repair applications based on the results of National Cooperative Highway Research Program (NCHRP) Project was performed under NCHRP Project 24-11(01) and produced a design guideline for use of EPS blocks in stand

Horvath, John S.

333

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

61 - 6770 of 28,905 results. 61 - 6770 of 28,905 results. Download CX-005494: Categorical Exclusion Determination Replacement of the F/H Labs Fire Alarm Control Panel CX(s) Applied: B2.2 Date: 02/28/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005494-categorical-exclusion-determination Download CX-001368: Categorical Exclusion Determination Repair Domestic Water Leak North of 719-18A CX(s) Applied: B1.3 Date: 03/16/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-001368-categorical-exclusion-determination Download CX-001369: Categorical Exclusion Determination Repair Firewater Line in B-Area East Side (Road C-2) near Post Indicator

334

Categorical Exclusion Determinations: Michigan | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Michigan Michigan Categorical Exclusion Determinations: Michigan Location Categorical Exclusion Determinations issued for actions in Michigan. DOCUMENTS AVAILABLE FOR DOWNLOAD September 18, 2013 CX-010935: Categorical Exclusion Determination Active, Tailorable Adhesives for Dissimilar Material Bonding, Repair and Reassembly CX(s) Applied: B3.6 Date: 09/18/2013 Location(s): Michigan Offices(s): National Energy Technology Laboratory September 18, 2013 CX-010934: Categorical Exclusion Determination Active, Tailorable Adhesives for Dissimilar Material Bonding, Repair and Reassembly CX(s) Applied: B3.6 Date: 09/18/2013 Location(s): Michigan Offices(s): National Energy Technology Laboratory September 17, 2013 CX-010943: Categorical Exclusion Determination Polyalkylene Glycol Based Lubricant for Light and Medium Duty Vehicle Axles

335

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

51 - 17960 of 28,905 results. 51 - 17960 of 28,905 results. Download CX-003138: Categorical Exclusion Determination Big Hill Buildings 802 and 812 Door Repairs CX(s) Applied: B1.3 Date: 07/20/2010 Location(s): Big Hill, Texas Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office http://energy.gov/nepa/downloads/cx-003138-categorical-exclusion-determination Download CX-003137: Categorical Exclusion Determination Repairs to West Hackberry Building 301 Roof CX(s) Applied: B1.3 Date: 07/12/2010 Location(s): West Hackberry, Louisiana Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office http://energy.gov/nepa/downloads/cx-003137-categorical-exclusion-determination Download CX-003594: Categorical Exclusion Determination Replace Bayou Choctaw Timber Pile Pipe Supports

336

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 25790 of 28,560 results. 81 - 25790 of 28,560 results. Download CX-010843: Categorical Exclusion Determination Subcontractor Repair of Roof Leak in Rm. F45 at 703-1B CX(s) Applied: B1.3 Date: 07/31/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-010843-categorical-exclusion-determination Download CX-010844: Categorical Exclusion Determination Subcontractor Repair of Leak Over Entry Door #1 at 703-B CX(s) Applied: B1.3 Date: 07/31/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-010844-categorical-exclusion-determination Download CX-010845: Categorical Exclusion Determination Temporary Modification (ETP-TMC-13-01) to Install an Ultrasonic Sound Emitting Device to Control Algae in the H-Retention Basin

337

Repair welding of fusion reactor components. Second year technical report  

SciTech Connect

Experiments have shown that irradiated Type 316 stainless steel is susceptible to heat-affected-zone (HAZ) cracking upon cooling when welded using the gas tungsten arc (GTA) process under lateral constraint. The cracking has been hypothesized to be caused by stress-assisted helium bubble growth and rupture at grain boundaries. This study utilized an experimental welding setup which enabled different compressive stresses to be applied to the plates during welding. Autogenous GTA welds were produced in Type 316 stainless steel doped with 256 appm helium. The application of a compressive stress, 55 MPa, during welding suppressed the previously observed catastrophic cracking. Detailed examinations conducted after welding showed a dramatic change in helium bubble morphology. Grain boundary bubble growth along directions parallel to the weld was suppressed. Results suggest that stress-modified welding techniques may be used to suppress or eliminate helium-induced cracking during joining of irradiated materials.

Chin, B.A.

1993-05-15T23:59:59.000Z

338

Applied Science and Technology Task Order Fiscal Year 2009 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

09 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2009 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2009 Year-End...

339

Applied Science and Technology Task Order Fiscal Year 2010 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2010 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2010 Year-End...

340

Applied Science and Technology Task Order Fiscal Year 2011 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2011 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2011 Year-End...

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Applied Science and Technology Task Order Fiscal Year 2008 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2008 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2008 Year-End...

342

Proceedings of the 2011 ACM Symposium on Applied Computing  

Science Conference Proceedings (OSTI)

Welcome to the 26th International Symposium on Applied Computing (SAC 2011). For the past 25 years, SAC has become a major international venue for computing researchers and applied practitioners to convene and share ideas on recent developments in a ...

William Chu; W. Eric Wong; Mathew J. Palakal; Chih-Cheng Hung

2011-03-01T23:59:59.000Z

343

Proceedings of the 2010 ACM Symposium on Applied Computing  

Science Conference Proceedings (OSTI)

Welcome to the 25th International Symposium on Applied Computing (SAC 2010). For the past 24 years, SAC has become a major international venue for computing researchers and applied practitioners to convene and share ideas on recent developments in a ...

Sung Y. Shin; Sascha Ossowski; Michael Schumacher; Mathew J. Palakal; Chih-Cheng Hung

2010-03-01T23:59:59.000Z

344

DOE - Office of Legacy Management -- Case School of Applied Science...  

Office of Legacy Management (LM)

Case School of Applied Science Ohio State University - OH 0-01 FUSRAP Considered Sites Site: Case School of Applied Science, Ohio State University (OH.0-01 ) Eliminated from...

345

Roadmap: Applied Engineering Manufacturing Systems Bachelor of Science  

E-Print Network (OSTI)

Roadmap: Applied Engineering ­ Manufacturing Systems ­ Bachelor of Science [AT 15000 Introduction to Human Communication 3 Fulfills Kent Core Additional Kent Core Requirement 3 See #12;Roadmap: Applied Engineering ­ Manufacturing Systems ­ Bachelor of Science [AT

Sheridan, Scott

346

Open Solicitations and How to Apply: the Loan Guarantee Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Open Solicitations and How to Apply: the Loan Guarantee Program Invites You to a Free Webinar Open Solicitations and How to Apply: the Loan Guarantee Program Invites You to a Free...

347

PLZT NANO PRE URSORS FOR HIGH ENERGY DENSITY APPLI ATIONS  

APPLI ATIONS & INDUSTRIES ENEFITS Pulsed Power Oil Exploration Capacitors Refer to SD # 12119 Thermistors Transducers Military & Defense Automotive

348

Dixson and Fu Receive NIST Applied Research Award  

Science Conference Proceedings (OSTI)

Dixson and Fu Receive NIST Applied Research Award. For Immediate Release: December 1, 1999. *. Bookmark and Share. ...

2013-07-19T23:59:59.000Z

349

Materials Research Applied to National Needs (MARANN) in Honor ...  

Science Conference Proceedings (OSTI)

Jul 31, 2012 ... About this Symposium. Meeting, 2013 TMS Annual Meeting & Exhibition. Symposium, Materials Research Applied to National Needs ...

350

PHOTOGRAMMETRIC ENGINEERING & REMOTE SENSING 1 ADVISER: Immersive Scientific Visualization Applied  

E-Print Network (OSTI)

be applied to the terrain (Figure 2b). A custom pixel shader was integrated with ROAM to render the dynamic

Head III, James William

351

ISHED1: Applying the LEM Methodology to Heat Exchanger Design  

E-Print Network (OSTI)

ISHED1: Applying the LEM Methodology to Heat Exchanger Design Kenneth A. Kaufman Ryszard S. Michalski MLI 00-2 #12;2 ISHED1: APPLYING THE LEM METHODOLOGY TO HEAT EXCHANGER DESIGN Kenneth A. Kaufman-2 January 2000 #12;ISHED1: APPLYING THE LEM METHODOLOGY TO HEAT EXCHANGER DESIGN Abstract Evolutionary

Michalski, Ryszard S.

352

Applying Innovation System Concept in Agricultural Research for  

Open Energy Info (EERE)

Applying Innovation System Concept in Agricultural Research for Applying Innovation System Concept in Agricultural Research for Development: A learning module Jump to: navigation, search Tool Summary Name: Applying Innovation System Concept in Agricultural Research for Development: A learning module Agency/Company /Organization: International Livestock Research Institute Sector: Land Focus Area: Agriculture Topics: Policies/deployment programs Resource Type: Training materials Website: mahider.ilri.org/bitstream/10568/167/1/Innovation_System_Agric_LM.pdf Applying Innovation System Concept in Agricultural Research for Development: A learning module Screenshot References: Applying Innovation System Concept in Agricultural Research for Development: A learning module[1] Preface "Sustained agricultural growth requires, among others, increased

353

Vehicle Technologies Office: Lightweight Materials Long-Term Applied  

NLE Websites -- All DOE Office Websites (Extended Search)

Long-Term Applied Research: Magnesium and Carbon Fiber to someone by E-mail Long-Term Applied Research: Magnesium and Carbon Fiber to someone by E-mail Share Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Facebook Tweet about Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Twitter Bookmark Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Google Bookmark Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Delicious Rank Vehicle Technologies Office: Lightweight Materials Long-Term Applied Research: Magnesium and Carbon Fiber on Digg Find More places to share Vehicle Technologies Office: Lightweight

354

Nikon Instruments Inc. | Resource Center -Research Papers -New insights into DNA repair http://www.nikoninstruments.com/Resource-Center/Research-Papers/New-insights-into-DNA-repair[4/10/2012 10:42:30 AM  

E-Print Network (OSTI)

, such as exposure to UV light, other forms of radiation, and certain environmental chemicals. DNA repair processes was performed using an Eclipse TE2000-U inverted microscope with a total internal reflection fluorescence (TIRF

Kowalczykowski, Stephen C.

355

How to Apply for an SES Position | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

How to Apply for an SES Position How to Apply for an SES Position How to Apply for an SES Position The Senior Executive Service (SES) is an elite group of men and women meeting the highest professional standards who administer public programs at the top levels of the Federal government. SES employees' salaries are linked directly to individual performance. The U.S. Office of Personnel Management's (OPM) SES web page contains a host of information that may be benefical to you. To apply for current SES positions within the Federal Government, including the Department of Energy please visit the Office of Personnel Management's USAJOBS site. From this site, you may view, download and apply for vacancies of interest to you. DOE does not accept unsolicited resumes. You must apply to a specific

356

Apply for Our Jobs | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Apply for Our Jobs | National Nuclear Security Administration Apply for Our Jobs | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog The National Nuclear Security Administration Apply for Our Jobs Home > Federal Employment > Apply for Our Jobs Apply for Our Jobs Whether you're a student seeking to learn more about a future career, just starting out, at mid-career or an experienced executive, NNSA may have the

357

Apply for Our Jobs | National Nuclear Security Administration  

NLE Websites -- All DOE Office Websites (Extended Search)

Apply for Our Jobs | National Nuclear Security Administration Apply for Our Jobs | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog The National Nuclear Security Administration Apply for Our Jobs Home > Federal Employment > Apply for Our Jobs Apply for Our Jobs Whether you're a student seeking to learn more about a future career, just starting out, at mid-career or an experienced executive, NNSA may have the

358

A Key Step in Repairing DNA Double-Strand Breaks | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

X-ray Rainbow X-ray Rainbow An Insulating Breakthrough Science Highlights Archives: 2013 | 2012 | 2011 | 2010 2009 | 2008 | 2007 | 2006 2005 | 2004 | 2003 | 2002 2001 | 2000 | 1998 | Subscribe to APS Science Highlights rss feed A Key Step in Repairing DNA Double-Strand Breaks JANUARY 10, 2007 Bookmark and Share The atomic structure of the protein 53BP1 identified by Mayo researchers. (Courtesy: Mayo Clinic) A team of Mayo Clinic researchers has uncovered a key step in the molecular pathway of repairing DNA double-strand breaks. The studies were carried out using the 19-ID beamline (SBC-CAT) at the Advanced Photon Source (APS, Argonne) and the X12-C beamline at the National Synchrotron Light Source (NSLS, Brookhaven National Laboratory). Both the APS and the NSLS are funded by the U.S. Department of Energy's Office of Basic Energy

359

Gene Expression Pathways Activated and Repair of DNA of Double Strand  

NLE Websites -- All DOE Office Websites (Extended Search)

Pathways Activated and Repair of DNA of Double Strand Pathways Activated and Repair of DNA of Double Strand Breaks (DSBs) Following Low Dose Ionizing Radiation in Human Bronchial Epithelial Cells (HBECs) With and Without Defined Premalignant Oncogenic Changes John Minna University of Texas Southwestern Medical Center at Dallas Abstract We want to determine the effect of low dose ionizing radiation on the molecular progression of lung epithelial cells towards lung cancer. Our endpoints are focused on specific molecular and cellular changes known to be associated with lung cancer development and quantitating those changes as a function of low dose ionizing radiation. We use immortalized human bronchial epithelial cells (HBECs) developed from >40 individuals (including those from current, former, and never smokers, males, females,

360

Connections Between the TCR Proteins XPG and CSB, Repair of Oxidative DNA  

NLE Websites -- All DOE Office Websites (Extended Search)

Connections Between the TCR Proteins XPG and CSB, Repair of Oxidative DNA Connections Between the TCR Proteins XPG and CSB, Repair of Oxidative DNA Base Damage, and the Radio-Adaptive Response Helen Budworth, Brett Haltiwanger, Altaf Sarker, Torsten Grösser, Björn Rydberg, and Priscilla K. Cooper* Life Sciences Division, MailStop 74-157, Lawrence Berkeley National Laboratory, Berkeley, CA 94720; *Corresponding author A key question that is central to accurately assessing human health risks from environmentally relevant low level (low dose, low dose rate) exposures to ionizing radiation is whether cellular responses measured at the higher doses for which there are strong epidemiological health data and the high doses commonly used in laboratory experiments extrapolate in a linear fashion to low doses. Recent data suggest that they may not. For example, low-dose hypersensitivity for

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Low Dose Radiation Research Program: Checkpoint Responses and Repair of a  

NLE Websites -- All DOE Office Websites (Extended Search)

Checkpoint Responses and Repair of a Broken Chromosome in Budding Checkpoint Responses and Repair of a Broken Chromosome in Budding Yeast. Authors: André Walther, Mreshwar B. Vaze, Anna Malkova, Grzegorz Ira, Xuan Wang, Jung-Ae Kim, Neal Sugawara, James E. Haber Brandeis University, Waltham, Massachusetts We have studied how yeast cells respond to the creation of a single double-strand break (DSB) by using a site-specific endonuclease to create one (or more) DSBs. In collaboration with R. Schroff, M. Licheten and W. Bonner (NIH) we have shown that a single DSB rapidly becomes associated with histone H2AX-phosphorylation (y-H2AX) covering a distance of about 25 kb on either side of the DSB. The drop-off in phosphorylation is not attributable to specific boundary sequences. y-H2AX can be phosphorylated by either ATR (Mec1) or ATM (Tel1) protein kinases. A mutation that removes

362

Standard practice for infrared flash thermography of composite panels and repair patches used in aerospace applications  

E-Print Network (OSTI)

1.1 This practice describes a procedure for detecting subsurface flaws in composite panels and repair patches using Flash Thermography (FT), in which an infrared (IR) camera is used to detect anomalous cooling behavior of a sample surface after it has been heated with a spatially uniform light pulse from a flash lamp array. 1.2 This practice describes established FT test methods that are currently used by industry, and have demonstrated utility in quality assurance of composite structures during post-manufacturing and in-service examinations. 1.3 This practice has utility for testing of polymer composite panels and repair patches containing, but not limited to, bismaleimide, epoxy, phenolic, poly(amide imide), polybenzimidazole, polyester (thermosetting and thermoplastic), poly(ether ether ketone), poly(ether imide), polyimide (thermosetting and thermoplastic), poly(phenylene sulfide), or polysulfone matrices; and alumina, aramid, boron, carbon, glass, quartz, or silicon carbide fibers. Typical as-fabricate...

American Society for Testing and Materials. Philadelphia

2007-01-01T23:59:59.000Z

363

Subterranean barriers, methods, and apparatuses for forming, inspecting, selectively heating, and repairing same  

DOE Patents (OSTI)

A subterranean barrier and method for forming same are disclosed, the barrier including a plurality of casing strings wherein at least one casing string of the plurality of casing strings may be affixed to at least another adjacent casing string of the plurality of casing strings through at least one weld, at least one adhesive joint, or both. A method and system for nondestructively inspecting a subterranean barrier is disclosed. For instance, a radiographic signal may be emitted from within a casing string toward an adjacent casing string and the radiographic signal may be detected from within the adjacent casing string. A method of repairing a barrier including removing at least a portion of a casing string and welding a repair element within the casing string is disclosed. A method of selectively heating at least one casing string forming at least a portion of a subterranean barrier is disclosed.

Nickelson, Reva A. (Shelley, ID); Sloan, Paul A. (Rigby, ID); Richardson, John G. (Idaho Falls, ID); Walsh, Stephanie (Idaho Falls, ID); Kostelnik, Kevin M. (Idaho, ID)

2009-04-07T23:59:59.000Z

364

Weld Repair of a Stamped Pressure Vessel in a Radiologically Controlled Zone  

Science Conference Proceedings (OSTI)

In September 2012 an ASME B&PVC Section VIII stamped pressure vessel located at the DOE Hanford Site Effluent Treatment Facility (ETF) developed a through-wall leak. The vessel, a steam/brine heat exchanger, operated in a radiologically controlled zone (by the CH2MHill PRC or CHPRC), had been in service for approximately 17 years. The heat exchanger is part of a single train evaporator process and its failure caused the entire system to be shut down, significantly impacting facility operations. This paper describes the activities associated with failure characterization, technical decision making/planning for repair by welding, logistical challenges associated with performing work in a radiologically controlled zone, performing the repair, and administrative considerations related to ASME code requirements.

Cannell, Gary L. [Fluor Enterprises, Inc.; Huth, Ralph J. [CH2MHill Plateau Remediation Company; Hallum, Randall T. [Fluor Government Group

2013-08-26T23:59:59.000Z

365

Low Dose Radiation Research Program: Genetic Control of Repair and Adaptive  

NLE Websites -- All DOE Office Websites (Extended Search)

Repair and Adaptive Responses to Low-level DNA Damage Repair and Adaptive Responses to Low-level DNA Damage James E. Haber Brandeis University Why This Project In order to fully understand mechanisms resulting in effects of low dose, whole system rather than cells must be examined. Although not identical to mammalian systems, simple systems usually have many similarities and give direction for further study of more complex systems. We use the budding yeast, Saccharomyces cerevisiae, as a model system because it is easy to manipulate and its genome is simple and well characterized. Project Goals Examine mechanisms and effects of low dose radiation response for: Genetic recombination mechanisms that lead to genomic instability Genetic factors that affect individual susceptibility to low-dose radiation The adaptive response

366

Role of Cell Cycle Regulation and MLH1, A Key DNA Mismatch Repair Protein, In Adaptive Survival Responses. Final Report  

SciTech Connect

Due to several interesting findings on both adaptive survival responses (ASRs) and DNA mismatch repair (MMR), this grant was separated into two discrete Specific Aim sets (each with their own discrete hypotheses). The described experiments were simultaneously performed.

David A. Boothman

1999-08-11T23:59:59.000Z

367

Optimal maintenance and repair policies in infrastructure management under uncertain facility deterioration rates: an adaptive control approach  

E-Print Network (OSTI)

1987. Optimal maintenance decisions for pavement management.maintenance and repair policies in infrastructure managementmanagement systems. In Section 3 we present AC formulations for the problem of ?nding optimal maintenance and

Madanat, S M; Durango, Pablo L

2001-01-01T23:59:59.000Z

368

Challenges in Applying Diamond Coatings to Carbide Twist Drills  

Science Conference Proceedings (OSTI)

Despite of the attractive advantage of applying diamond coating to drills, ... Investigation of a Hybrid Cutting Tool Design for Shearing Operations of Sheet Metals.

369

NREL: Technology Transfer - Apply Now for Energy-Efficient Housing ...  

Apply Now for Energy-Efficient Housing ... and NREL's Residential Buildings Research Web site to learn about systems integration and energy analysis ...

370

1 SCRA Applied Research & Development offers the following ...  

Science Conference Proceedings (OSTI)

... and the rapid transition of results into US ... the Way (PLTW); National Science Foundation initiatives ... 6 SCRA Applied R&D 5300 International Blvd N ...

2012-10-26T23:59:59.000Z

371

Applied Process Engineering Laborotory APEL | Open Energy Information  

Open Energy Info (EERE)

Engineering Laborotory APEL Jump to: navigation, search Name Applied Process Engineering Laborotory (APEL) Place United States Sector Services Product General Financial & Legal...

372

Applied Mathematics and Plasma Physics, T-5: Theoretical, T:...  

NLE Websites -- All DOE Office Websites (Extended Search)

Pieter Swart Deputy Group Leader Kim Rasmussen Administration Charlotte Lehman Office Location TA-3, Bldg 508, Rm 204 Applied Mathematics and Plasma Physics, T-5 The group...

373

Mark Linne Dept. Applied Mechanics, Chalmers University, Gothenburg...  

NLE Websites -- All DOE Office Websites (Extended Search)

Optical and X-ray Measurements for Fuel Sprays Mark Linne Dept. Applied Mechanics, Chalmers University, Gothenburg, 41296, Sweden This talk will describe measurement needs across...

374

An improved Benders decomposition applied to a multi-layer ...  

E-Print Network (OSTI)

GLOBECOM 2007, Washington DC, USA, December 2007. [8] A. M. Costa, A survey on benders decomposition applied to fixed-charge network design ...

375

Infrared Imagery Applied to A Large Buoyant Plume  

Science Conference Proceedings (OSTI)

The possibility of applying infrared imagery to the study of a large, hot plume materialized by carbon particles resulting from the incomplete combustion of fuel oil is investigated.

J-M. Brustet; B. Benech; P. Waldteufel

1981-05-01T23:59:59.000Z

376

Steel Research Applied to National Needs - A Company Perspective  

Science Conference Proceedings (OSTI)

Symposium, Materials Research Applied to National Needs (MARANN) in Honor of ... food packaging, transportation (auto, rail, and air), etc, to name just a few.

377

Geothermal: Sponsored by OSTI -- Extracting and Applying SV-SV...  

Office of Scientific and Technical Information (OSTI)

Extracting and Applying SV-SV Shear Modes from Vertical Vibrator Data Across Geothermal Prospects Final Report Geothermal Technologies Legacy Collection HelpFAQ | Site Map |...

378

Lagrangean Duality Applied on Vehicle Routing with Time Windows  

E-Print Network (OSTI)

Nov 6, 2001 ... Lagrangean Duality Applied on Vehicle Routing with Time Windows ... with the Vehicle Routing Problem with Time Windows (VRPTW).

379

Los Alamos Lab: International and Applied Technology Division...  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Electromagnetics, IAT-2 IAT-2 is a broad spectrum electromagnetics applications organization whose research and development activities address the Global Security...

380

How to Apply for NIST, Department of Commerce, and Other ...  

Science Conference Proceedings (OSTI)

... Search for Job Vacancies: Vacancy announcements contain important information that applicants need to know to apply for a specific job opening ...

2013-08-09T23:59:59.000Z

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Modular Systems Biology applied to TGFbeta and DNA Damage Response...  

NLE Websites -- All DOE Office Websites (Extended Search)

Modular Systems Biology applied to TGFbeta and DNA Damage Response Signaling following Low Dose Radiation Francis Cucinotta NASA Johnson Space Center Abstract Modular systems...

382

To: Mansueti, Lawrence Subject: RE: Pepco Scheduled Line Repair Dec. 1-20, 2006  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

From: ecchimento@comcast.net [mailto:ecchimento@comcast.net] Sent: Monday, January 29, 2007 6:28 PM To: Mansueti, Lawrence Subject: RE: Pepco Scheduled Line Repair Dec. 1-20, 2006 Larry, Regarding the planned line outage, scheduled for Feb. 20 through Mar. 6, I am requesting that the residents near the plant be moved for the duration of the outage to protect their health. Would you include this comment also in the ongoing recorded discussion? Thank you. Elizabeth

383

Precracked RC T-beams Repaired in Shear with Externally Bonded CFRP Sheets  

E-Print Network (OSTI)

, strengthening and repair of existing structures, advanced numerical analyses, glass fiber reinforced polymer pipelines and sustainable concrete. Chris Morley is a former Senior Lecturer in Concrete Structures at Cambridge University, UK. He has always been... effective since only a fairly short bonded length is available for force transfer. Another explanation could be that the “deeper” beams had more CFRP area bridging a shear crack compared to the “shallower” beams. Shear force-deflection relationship...

Dirar, Samir; Lees, Janet M.; Morley, Chris T.

2012-03-01T23:59:59.000Z

384

Computer Based Training (CBT) Buried Pipe Condition Assessment and Repair, Version 1.0  

Science Conference Proceedings (OSTI)

The purpose of this training module is to provide an understanding of the inspection of buried piping. Course 1 of the course covers initial direct condition assessment of excavated buried pipe. Course 2 covers buried pipe coating repairs and final as-left inspections of piping. The CBT includes graphics, interactive features, and review questions to help the student better understand the subject. Windows XP, Vista, 7

2011-11-23T23:59:59.000Z

385

Nondestructive Evaluation: Risk-Informed In-Service Repair and Replacement: Draft Methodology  

Science Conference Proceedings (OSTI)

Code Case N-660, Revision 0, "Risk-Informed Safety Classification for Use in Risk-Informed Repair/Replacement Activities," was published by ASME and was developed to expand the breadth of risk-informed Section XI requirements to pressure boundary components. This report provides a generic draft methodology and technical basis for revisions to N-660 for Class 2 and 3 systems based on lessons learned from pilot application to Arkansas Nuclear One (ANO), Unit 2.

2009-12-23T23:59:59.000Z

386

Manual of Bearing Failures and Repair in Power Plant Rotating Equipment  

Science Conference Proceedings (OSTI)

Turbine bearing failures in electric utilities can be responsible for outages resulting in significant lost generation time. In addition to bearing failures in the turbogenerators, failures may occur in other rotating equipment, such as pumps, fans, and auxiliary systems. Knowledge of bearing failure mechanisms and causes allows utilities to introduce safeguards into their occurrence and take faster remedial action. EPRI released the initial report, Manual of Bearing Failures and Repair in Power Plant Ro...

2011-12-15T23:59:59.000Z

387

Review of Weld Repair Options for Grade 91, Part 2: Damage Development and Distribution  

Science Conference Proceedings (OSTI)

This report reviews the likely creep damage distributions in weld repairs in Grade 91 steel. Information is provided in terms of the various weld metals that may be used, including nickel-based, matching P91 (B9), and standard P9 (B8) weld metals. The different damage distributions for each type, with associated implications for nondestructive evaluation, are discussed. In particular, the limitations of using surface ...

2013-06-20T23:59:59.000Z

388

Advanced Nuclear Technology: Reduction of American Society of Mechanical Engineers III Weld Fabrication Repairs--Fitness for Purpose  

Science Conference Proceedings (OSTI)

This report provides alternative acceptance criteria to existing American Society of Mechanical Engineers (ASME) Section III acceptance criteria for fabrication welds. The objective is to avoid unnecessary repairs of Class 1 and Class 2 full-penetration butt welds. The bases for the project are threefold: 1) the repair of fabrication flaws is known to contribute to failures during subsequent service, 2) the ASME Code does not currently provide fitness-for-service assessment of fabrication flaws, and 3) a...

2010-11-15T23:59:59.000Z

389

urbino worldwide campus applied computer scienceComputer Architecture  

E-Print Network (OSTI)

urbino worldwide campus applied computer scienceComputer Architecture alessandro bogliolo isti information science and technology institute 1/16 05.03 Pipeline hazards 05 CPU 05.03 Pipeline hazards;urbino worldwide campus applied computer scienceComputer Architecture alessandro bogliolo isti

Bogliolo, Alessandro

390

Applying to EPA for Approval of Other Uses of Phosphogypsum  

E-Print Network (OSTI)

Applying to EPA for Approval of Other Uses of Phosphogypsum: Preparing and Submitting a Complete. EP-D-04-007, Work Assignment 0-2 December 2005 #12;ii Applying for Other Uses of Phosphogypsum phosphogypsum in stacks? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.4. What

391

DNA repair in mammalian cells exposed to combinations of carcinogenic agents. [uv radiation; AAAF; 4-NQO; DMBA-epoxide; ICR-170  

SciTech Connect

Cells defective in one or more aspects of repair are killed and often mutagenized more readily than normal cells by DNA damaging agents, and humans whose cells are deficient in repair are at an increased carcinogenic risk compared to normal individuals. The excision repair of uv induced pyrimidine dimers is a well studied system, but the details of the steps in this repair system are far from being understood in human cells. We know that there are a number of chemicals that mimic uv in that normal human cells repair DNA damage from both these agents and from uv by a long patch excision repair system, and that xeroderma pigmentosum cells defective in repair of uv are also defective in the repair of damage from these chemicals. The chemicals we have investigated are AAAF, 4-NQO, DMBA-epoxide, and ICR-170. We describe experiments, using several techniques, in which DNA excision repair is measured after treatment of various human cell strains with combinations of uv and these agents. If two agents have a common rate limiting step then, at doses high enough to saturate the repair system, one would expect the observed repair after a treatment with a combination of agents to be equal to that from one agent alone. Such is not the case for normal human or excision-deficient XP cells. In the former repair is additive and in the latter repair is usually appreciably less than that observed with either agent alone. Models that attempt to explain these surprising results involve complexes of enzymes and cofactors.

Setlow, R.B.; Ahmed, F.E.

1979-01-01T23:59:59.000Z

392

Applied Mathematics | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Applied Applied Mathematics Advanced Scientific Computing Research (ASCR) ASCR Home About Research Applied Mathematics Applied Mathematics Conferences And Workshops Computer Science Next Generation Networking Scientific Discovery through Advanced Computing (SciDAC) Computational Science Graduate Fellowship (CSGF) ASCR SBIR-STTR Facilities Science Highlights Benefits of ASCR Funding Opportunities Advanced Scientific Computing Advisory Committee (ASCAC) News & Resources Contact Information Advanced Scientific Computing Research U.S. Department of Energy SC-21/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-7486 F: (301) 903-4846 E: sc.ascr@science.doe.gov More Information » Research Applied Mathematics Print Text Size: A A A RSS Feeds FeedbackShare Page

393

Remediation of Mercury and Industrial Contaminants Applied Field Research  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Remediation of Mercury and Industrial Contaminants Applied Field Remediation of Mercury and Industrial Contaminants Applied Field Research Initiative (RoMIC-AFRI) Remediation of Mercury and Industrial Contaminants Applied Field Research Initiative (RoMIC-AFRI) Remediation of Mercury and Industrial Contaminants Applied Field Research Initiative (RoMIC-AFRI) Located on the Oak Ridge Reservation (ORR) in Oak Ridge, Tennessee, the RoMIC-AFRI was established to protect water resources by addressing the challenge of preventing contamination. The initiative at Oak Ridge is a collaborative effort that leverages DOE investments in basic science and applied research and the work of site contractors to address the complex challenges in the remediation of legacy waste at the Oak Ridge Reservation. The mission of the Remediation of Mercury and Industrial Contaminants

394

Applied Materials Switzerland SA Formerly HCT Shaping Systems SA | Open  

Open Energy Info (EERE)

Switzerland SA Formerly HCT Shaping Systems SA Switzerland SA Formerly HCT Shaping Systems SA Jump to: navigation, search Name Applied Materials Switzerland SA (Formerly HCT Shaping Systems SA) Place Chezeaux, Switzerland Zip 1033 Product Manufacturer of wire saws for the semiconductor and photovoltaic wafer slicing industries. References Applied Materials Switzerland SA (Formerly HCT Shaping Systems SA)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Applied Materials Switzerland SA (Formerly HCT Shaping Systems SA) is a company located in Chezeaux, Switzerland . References ↑ "[ Applied Materials Switzerland SA (Formerly HCT Shaping Systems SA)]" Retrieved from "http://en.openei.org/w/index.php?title=Applied_Materials_Switzerland_SA_Formerly_HCT_Shaping_Systems_SA&oldid=342245"

395

LENS repair and modification of metal NW components:materials and applications guide.  

DOE Green Energy (OSTI)

Laser Engineered Net Shaping{trademark} (LENS{reg_sign}) is a unique, layer additive, metal manufacturing technique that offers the ability to create fully dense metal features and components directly from a computer solid model. LENS offers opportunities to repair and modify components by adding features to existing geometry, refilling holes, repairing weld lips, and many other potential applications. The material deposited has good mechanical properties with strengths typically slightly higher that wrought material due to grain refinement from a quickly cooling weld pool. The result is a material with properties similar to cold worked material, but without the loss in ductility traditionally seen with such treatments. Furthermore, 304L LENS material exhibits good corrosion resistance and hydrogen compatibility. This report gives a background of the LENS process including materials analysis addressing the requirements of a number of different applications. Suggestions are given to aid both the product engineer and the process engineer in the successful utilization of LENS for their applications. The results of testing on interface strength, machinability, weldability, corrosion resistance, geometric effects, heat treatment, and repair strategy testing are all included. Finally, the qualification of the LENS process is briefly discussed to give the user confidence in selecting LENS as the process of choice for high rigor applications. The testing showed LENS components to have capability in repair/modification applications requiring complex castings (W80-3 D-Bottle bracket), thin wall parts requiring metal to be rebuilt onto the part (W87 Firing Set Housing and Y-12 Test Rings), the filling of counterbores for use in reservoir reclamation welding (SRNL hydrogen compatibility study) and the repair of surface defects on pressure vessels (SRNL gas bottle repair). The material is machinable, as testing has shown that LENS deposited material machines similar to that of welded metal. Tool wear is slightly higher in LENS material than in wrought material, but not so much that one would be concerned with increased tooling cost. The LENS process achieved process qualification for the AY1E0125 D-Bottle Bracket from the W80-3 LEP program, and in the effort, also underwent testing in weapons environments. These tests included structural dynamic response testing and drop testing. The LENS deposited parts were compared in these tests with conventionally machined parts and showed equivalency to such an extent that the parts were accepted for use in parallel path subsystem-level weapon environment testing. The evaluation of LENS has shown that the process can be a viable option when either complete metal parts are needed or existing metal parts require modification or repair. The LENS Qualification Technology Investment team successfully investigated new applications for the LENS process and showed that it has great applicability across the Nuclear Weapons Complex as well as in other high rigor applications.

Smugeresky, John E. (Sandia National Laboratories, Livermore, CA); Gill, David Dennis; Oberhaus, Jason (BWXT Y-12); Adams, Thad (Savannah River National Laboratory); VanCamp, Chad (Kansas City Plant)

2006-11-01T23:59:59.000Z

396

CX-009719: Categorical Exclusion Determination | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

19: Categorical Exclusion Determination 19: Categorical Exclusion Determination CX-009719: Categorical Exclusion Determination Repair and Line Bryan Mound Brine Tank, BMT-1 CX(s) Applied: B1.3 Date: 12/18/2012 Location(s): Texas Offices(s): Strategic Petroleum Reserve Field Office Subcontractor shall provide all transportation, materials, equipment, supplies, tools, facilities, utilities, labor and supervision required to repair and line the Bryan Mound (BM) brine tank, BMT-1. The tank will be cleaned by others before turning it over to the Subcontractor for repairs. Tasks include welding repair work (if required), welding inspection, tank surface preparation, and lining. CX-009719.pdf More Documents & Publications CX-000873: Categorical Exclusion Determination CX-009213: Categorical Exclusion Determination

397

How to Apply for Senior Executive positions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

How to Apply for Senior Executive positions How to Apply for Senior Executive positions How to Apply for Senior Executive positions To apply vacancies for SENIOR EXECUTIVE SERVICE (SES) , SENIOR LEVEL (SL), SCIENTIFIC AND PROFESSIONAL (ST) positions within the Department of Energy please visit OPM's website: http://www.usajobs.gov. From this site, you may download announcements for vacancies of interest to you. SENIOR EXECUTIVE SERVICE (SES) The Guide to Senior Executive Service Qualifications provides detailed information about executive qualifications and tips for writing effective qualification statements. What Are Executive Core Qualifications (ECQs) The Executive Core Qualifications (ECQs) define the competencies needed to build a federal corporate culture that drives for results, serves customers, and builds successful teams and coalitions within and outside

398

Energy Efficiency in Buildings in Switzerland - Applied Research...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency in Buildings in Switzerland - Applied Research on Vacuum Insulation, Passive Houses etc. Speaker(s): Armin Binz Date: January 21, 2003 - 12:00pm Location: Bldg....

399

Electrical capacitance volume tomography (ECVT) applied to bubbling fluid beds  

SciTech Connect

These presentation visuals illustrate the apparatus and method for applying Electrical Capacitance Volume Tomography (ECVT) to bubbling fluid beds to their solid fraction and bubble properties. Results are compared to estimated values.

Weber, J., Mei, J.

2012-01-01T23:59:59.000Z

400

A Stereo Photogrammetric Technique Applied to Orographic Convection  

Science Conference Proceedings (OSTI)

This paper describes a technique for photogrammetric analysis of stereo pairs of images that is applied to the study of orographic convection. The technique is designed for use with digital images and assumes detailed knowledge of the camera ...

Joseph A. Zehnder; Jiuxiang Hu; Anshuman Razdan

2007-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Proceedings of the 2008 ACM symposium on Applied computing  

Science Conference Proceedings (OSTI)

Welcome to the 23rd Annual ACM Symposium on Applied Computing (SAC 2008). This international event is dedicated to computer scientists, engineers, and practitioners seeking innovative ideas in various areas of computer applications. This year, the conference ...

Roger L. Wainwright; Hisham M. Haddad

2008-03-01T23:59:59.000Z

402

DOE Solar Decathlon: How to Apply for the Solar Decathlon  

NLE Websites -- All DOE Office Websites (Extended Search)

Photos Videos Education Sponsors Volunteers History FAQs Contacts How To Apply for the Solar Decathlon Is your school interested in participating in the next U.S. Department of...

403

NEW MOTOR DESIGN CONCEPT FOR ENERGY SAVING APPLIED TO  

E-Print Network (OSTI)

SHARK, NEW MOTOR DESIGN CONCEPT FOR ENERGY SAVING APPLIED TO SWITCHED RELUCTANCE MOTOR by Ana of the cylindrical and Shark air gap Switched Reluctance Motors and their assistance during the experimental work with other motor technologies such

404

Los Alamos Lab: International and Applied Technology Division...  

NLE Websites -- All DOE Office Websites (Extended Search)

International Research and Analysis, IAT-1 IAT-1 has one of the most diverse work forces in the division. By applying its scientific and engineering skills to designated problems,...

405

Proceedings of the 2009 ACM symposium on Applied Computing  

Science Conference Proceedings (OSTI)

On behalf of the Organizing Committee, we welcome you to the 24th Annual ACM Symposium on Applied Computing (SAC 2009) hosted by Chaminade University in Hawaii. This international forum has been dedicated to computer scientists, engineers and practitioners ...

Sung Y. Shin; Sascha Ossowski

2009-03-01T23:59:59.000Z

406

Categorical Exclusion Determinations: Wyoming | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 3, 2010 March 3, 2010 CX-006667: Categorical Exclusion Determination Restoration of 73-SX-10H CX(s) Applied: B6.1 Date: 03/07/2010 Location(s): Casper, Wyoming Office(s): RMOTC February 24, 2010 CX-006661: Categorical Exclusion Determination Repair Flowline at 83-AX-4 CX(s) Applied: B5.2, B5.4 Date: 02/24/2010 Location(s): Casper, Wyoming Office(s): RMOTC February 24, 2010 CX-006655: Categorical Exclusion Determination Coal Bed Methane Gas Separator CX(s) Applied: B3.7, B3.11 Date: 02/24/2010 Location(s): Casper, Wyoming Office(s): RMOTC February 24, 2010 CX-006651: Categorical Exclusion Determination Water Haul Permit Location CX(s) Applied: B1.3, B1.6 Date: 02/11/2010 Location(s): Casper, Wyoming Office(s): RMOTC February 13, 2010 CX-006734: Categorical Exclusion Determination

407

Categorical Exclusion Determinations: RMOTC | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

February 24, 2010 February 24, 2010 CX-006651: Categorical Exclusion Determination Water Haul Permit Location CX(s) Applied: B1.3, B1.6 Date: 02/11/2010 Location(s): Casper, Wyoming Office(s): RMOTC February 16, 2010 CX-006659: Categorical Exclusion Determination Repair Flowline 100 Feet North of 71-3-SX-3 CX(s) Applied: B5.2, B5.4 Date: 02/16/2010 Location(s): Casper, Wyoming Office(s): RMOTC February 13, 2010 CX-006734: Categorical Exclusion Determination ThruBit LWT CX(s) Applied: B3.7, B5.12 Date: 07/13/2010 Location(s): Casper, Wyoming Office(s): RMOTC February 11, 2010 CX-006648: Categorical Exclusion Determination Change Out Down Guy on Power Pole East of B-1-33 CX(s) Applied: B1.3 Date: 02/11/2010 Location(s): Casper, Wyoming Office(s): RMOTC February 11, 2010 CX-006657: Categorical Exclusion Determination

408

18.337J / 6.338J Applied Parallel Computing (SMA 5505), Spring 2005  

E-Print Network (OSTI)

Applied Parallel Computing is an advanced interdisciplinary introduction to applied parallel computing on modern supercomputers.

Edelman, Alan

409

DNA Repair Biomarkers Predict Response to Neoadjuvant Chemoradiotherapy in Esophageal Cancer  

SciTech Connect

Purpose: The addition of neoadjuvant chemoradiotherapy prior to surgical resection for esophageal cancer has improved clinical outcomes in some trials. Pathologic complete response (pCR) following neoadjuvant therapy is associated with better clinical outcome in these patients, but only 22% to 40% of patients achieve pCR. Because both chemotherapy and radiotherapy act by inducing DNA damage, we analyzed proteins selected from multiple DNA repair pathways, using quantitative immunohistochemistry coupled with a digital pathology platform, as possible biomarkers of treatment response and clinical outcome. Methods and Materials: We identified 79 patients diagnosed with esophageal cancer between October 1994 and September 2002, with biopsy tissue available, who underwent neoadjuvant chemoradiotherapy prior to surgery at the Massachusetts General Hospital and used their archived, formalin-fixed, paraffin-embedded biopsy samples to create tissue microarrays (TMA). TMA sections were stained using antibodies against proteins in various DNA repair pathways including XPF, FANCD2, PAR, MLH1, PARP1, and phosphorylated MAPKAP kinase 2 (pMK2). Stained TMA slides were evaluated using machine-based image analysis, and scoring incorporated both the intensity and the quantity of positive tumor nuclei. Biomarker scores and clinical data were assessed for correlations with clinical outcome. Results: Higher scores for MLH1 (p = 0.018) and lower scores for FANCD2 (p = 0.037) were associated with pathologic response to neoadjuvant chemoradiation on multivariable analysis. Staining of MLH1, PARP1, XPF, and PAR was associated with recurrence-free survival, and staining of PARP1 and FANCD2 was associated with overall survival on multivariable analysis. Conclusions: DNA repair proteins analyzed by immunohistochemistry may be useful as predictive markers for response to neoadjuvant chemoradiotherapy in patients with esophageal cancer. These results are hypothesis generating and need confirmation in an independent data set.

Alexander, Brian M., E-mail: bmalexander@lroc.harvard.edu [Department of Radiation Oncology, Dana-Farber/Brigham and Women's Cancer Center, Boston, Massachusetts (United States); Wang Xiaozhe [On-Q-ity, Inc., Waltham, Massachusetts (United States); Niemierko, Andrzej [Department of Radiation Oncology, Massachusetts General Hospital, Boston, Massachusetts (United States); Weaver, David T. [On-Q-ity, Inc., Waltham, Massachusetts (United States); Mak, Raymond H. [Department of Radiation Oncology, Dana-Farber/Brigham and Women's Cancer Center, Boston, Massachusetts (United States); Roof, Kevin S. [Southeast Radiation Oncology, Charlotte, North Carolina (United States); Fidias, Panagiotis [Department of Medicine, Massachusetts General Hospital, Boston, Massachusetts (United States); Wain, John [Department of Surgery, Massachusetts General Hospital, Boston, Massachusetts (United States); Choi, Noah C. [Department of Radiation Oncology, Massachusetts General Hospital, Boston, Massachusetts (United States)

2012-05-01T23:59:59.000Z

410

Development and validation of nondestructive inspection techniques for composite doubler repairs on commercial aircraft  

SciTech Connect

Composite doublers, or repair patches, provide an innovative repair technique which can enhance the way aircraft are maintained. Instead of riveting multiple steel or aluminum plates to facilitate an aircraft repair, it is possible to bond a single boron-epoxy composite doubler to the damaged structure. In order for the use of composite doublers to achieve widespread use in the civil aviation industry, it is imperative that methods be developed which can quickly and reliably assess the integrity of the doubler. In this study, a specific composite application was chosen on an L-1011 aircraft in order to focus the tasks on application and operation issues. Primary among inspection requirements for these doublers is the identification of disbonds, between the composite laminate and aluminum parent material, and delaminations in the composite laminate. Surveillance of cracks or corrosion in the parent aluminum material beneath the doubler is also a concern. No single nondestructive inspection (NDI) method can inspect for every flaw type, therefore it is important to be aware of available NDI techniques and to properly address their capabilities and limitations. A series of NDI tests were conducted on laboratory test structures and on full-scale aircraft fuselage sections. Specific challenges, unique to bonded composite doubler applications, were highlighted. An array of conventional and advanced NDI techniques were evaluated. Flaw detection sensitivity studies were conducted on applicable eddy current, ultrasonic, X-ray and thermography based devices. The application of these NDI techniques to composite doublers and the results from test specimens, which were loaded to provide a changing flaw profile, are presented in this report. It was found that a team of these techniques can identify flaws in composite doubler installations well before they reach critical size.

Roach, D.; Walkington, P.

1998-05-01T23:59:59.000Z

411

Suberoylanilide Hydroxyamic Acid Modification of Chromatin Architecture Affects DNA Break Formation and Repair  

Science Conference Proceedings (OSTI)

Purpose: Chromatin-modifying compounds that inhibit the activity of histone deacetylases have shown potency as radiosensitizers, but the action of these drugs at a molecular level is not clear. Here we investigated the effect of suberoylanilide hydroxyamic acid (SAHA) on DNA breaks and their repair and induction of rearrangements. Methods and Materials: The effect of SAHA on both clonogenic survival and repair was assessed using cell lines SCC-25, MCF7, and TK6. In order to study unique DNA double-strand breaks, anti-CD95 antibody was employed to introduce a DNA double-strand break at a known location within the 11q23 region. The effects of SAHA on DNA cleavage and rearrangements were analyzed by ligation-mediated PCR and inverse PCR, respectively. Results: SAHA acts as radiosensitizer at 1 {mu}M, with dose enhancement factors (DEFs) at 10% survival of: SCC-25 - 1.24 +- 0.05; MCF7 - 1.16 +- 0.09 and TK6 - 1.17 +- 0.05, and it reduced the capacity of SCC-25 cells to repair radiation induced lesions. Additionally, SAHA treatment diffused site-specific fragmentation over at least 1 kbp in TK6 cells. Chromosomal rearrangements produced in TK6 cells exposed to SAHA showed a reduction in microhomology at the breakpoint between 11q23 and partner chromosomes. Conclusions: SAHA shows efficacy as a radiosensitizer at clinically obtainable levels. In its presence, targeted DNA strand breaks occur over an expanded region, indicating increased chromatin access. The rejoining of such breaks is degraded by SAHA when measured as rearrangements at the molecular level and rejoining that contributes to cell survival.

Singh, Sheetal; Le Hongan; Shih, S.-J.; Ho, Bay [Department of Radiation Oncology, University of California at Davis, 4501 X St., Sacramento, California 95817 (United States); Vaughan, Andrew T., E-mail: andrew.vaughan@ucdmc.ucdavis.ed [Department of Radiation Oncology, University of California at Davis, 4501 X St., Sacramento, California 95817 (United States); Department of Veterans Affairs, Mather, California 95655 (United States)

2010-02-01T23:59:59.000Z

412

Inhibition of homologous recombination repair in irradiated tumor cells pretreated with Hsp90 inhibitor 17-allylamino-17-demethoxygeldanamycin  

Science Conference Proceedings (OSTI)

In order to investigate the mechanism of radio-sensitization by an Hsp90 inhibitor 17-allylamino-17-demethoxygeldanamycin (17-AAG), we studied repair of DNA double strand breaks (DSBs) in irradiated human cells pre-treated with 17-AAG. DSBs are thought to be the critical target for radiation-induced cell death. Two human tumor cell lines DU145 and SQ-5 which showed clear radio-sensitization by 17-AAG revealed a significant inhibition of DSB repair, while normal human cells which did not show radio-sensitization by the drug indicated no change in the DSB repair kinetics with 17-AAG. We further demonstrated that BRCA2 was a novel client protein for Hsp90, and 17-AAG caused the degradation of BRCA2 and in turn altered the behavior of Rad51, a critical protein for homologous recombination (HR) pathway of DSB repair. Our data demonstrate for the first time that 17-AAG inhibits the HR repair process and could provide a new therapeutic strategy to selectively result in higher tumor cell killing.

Noguchi, Miho [Graduate School of Science and Technology, Chiba University, 1-33 Yayoi-cho, Inage-ku, Chiba 263-8522 (Japan); Heavy-Ion Radiobiology Research Group, National Institute of Radiological Sciences, 4-9-1, Anagawa, Inage-ku, Chiba 263-8555 (Japan); Yu, Dong [Heavy-Ion Radiobiology Research Group, National Institute of Radiological Sciences, 4-9-1, Anagawa, Inage-ku, Chiba 263-8555 (Japan); Hirayama, Ryoichi [Heavy-Ion Radiobiology Research Group, National Institute of Radiological Sciences, 4-9-1, Anagawa, Inage-ku, Chiba 263-8555 (Japan); Ninomiya, Yasuharu [Heavy-Ion Radiobiology Research Group, National Institute of Radiological Sciences, 4-9-1, Anagawa, Inage-ku, Chiba 263-8555 (Japan); Sekine, Emiko [Heavy-Ion Radiobiology Research Group, National Institute of Radiological Sciences, 4-9-1, Anagawa, Inage-ku, Chiba 263-8555 (Japan); Kubota, Nobuo [Department of Radiological Sciences, Ibaraki Prefectural University of Health Sciences, 4669-2 Ami, Ami-machi, Inashiki-gun, Ibaraki 300-0394 (Japan); Ando, Koichi [Graduate School of Science and Technology, Chiba University, 1-33 Yayoi-cho, Inage-ku, Chiba 263-8522 (Japan); Heavy-Ion Radiobiology Research Group, National Institute of Radiological Sciences, 4-9-1, Anagawa, Inage-ku, Chiba 263-8555 (Japan); Okayasu, Ryuichi [Heavy-Ion Radiobiology Research Group, National Institute of Radiological Sciences, 4-9-1, Anagawa, Inage-ku, Chiba 263-8555 (Japan)]. E-mail: rokayasu@nirs.go.jp

2006-12-22T23:59:59.000Z

413

Welding and Repair Technology Center: Assessment of Friction Stir Welding for Nuclear Applications  

Science Conference Proceedings (OSTI)

This report describes a study that was conducted to determine the usability of friction stir welding (FSW) for the repair of nuclear power plant components. The first phase of the study has performinged in air and underwater welding on 304 SS, 308L SS, Alloy182, and Alloy 600 test plates. In addition, crack sealing tests were carried out using electric discharge machining notches in these test plates. A patch seal test was also added to the test matrix to determine if a flat plate could be ...

2012-12-12T23:59:59.000Z

414

BWRVIP-53-A: BWR Vessel and lnternals Project, Standby Liquid Control Line Repair Design Criteria  

Science Conference Proceedings (OSTI)

The Boiling Water Reactor Vessel and Internals Project (BWRVIP), formed in June, 1994, is an association of utilities focused exclusively on BWR vessel and internals issues. This BWRVIP report documents criteria which can be used to design a repair for the standby liquid control (SLC) line in a BWR. A previous version of this report was published as BWRVIP-53 (TR-108716). This report (BWRVIP-53- A) incorporates changes proposed by the BWRVIP in response to U.S. Nuclear Regulatory Commission (NRC) Request...

2005-09-07T23:59:59.000Z

415

How to Apply the ENERGY STAR Certified Building Decal  

NLE Websites -- All DOE Office Websites (Extended Search)

How to Apply the ENERGY STAR How to Apply the ENERGY STAR Certified Building Decal Page Cyan-and-White Decal Instructions Application Instructions 2 How to Make a Glass Plaque 4 Cyan-and-White Paper Templates 5 "Etched-Look" Decal Instructions Application Instructions 7 How to Make a Glass Plaque 9 "Etched-Look" Paper Templates 10 How to Apply the ENERGY STAR Cyan and White Certified Building Decal What's in this package: Two sets of: ENERGY STAR logo decal 1. "Certified Building" lettering decal, with thick white paper on 2. one side and thin, semi-translucent paper on the other side. Paper templates of logo and lettering What you'll need: Level 1. Masking tape 2. Rubbing alcohol and a clean, soft cloth 3. Drivers license, credit card, or other rigid

416

How to Apply for Weatherization Assistance | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

How to Apply for Weatherization Assistance How to Apply for Weatherization Assistance How to Apply for Weatherization Assistance March 24, 2009 - 12:45pm Addthis Elizabeth Spencer Communicator, National Renewable Energy Laboratory A few weeks ago, the U.S. Department of Energy announced that it was investing $8 billion into weatherization and state energy grants-$5 billion of which is going directly to the Weatherization Assistance Program. And why is that interesting? Well, the Weatherization Assistance Program provides low-income families with free-of-charge, energy efficient upgrades to their homes. A more efficient home means that you pay less every month on your energy bills-and while that's the kind of upgrade anyone can benefit from, this program helps those who need those extra dollars the

417

Modular Applied General Equilibrium Tool (MAGNET) | Open Energy Information  

Open Energy Info (EERE)

Modular Applied General Equilibrium Tool (MAGNET) Modular Applied General Equilibrium Tool (MAGNET) Jump to: navigation, search Tool Summary Name: Modular Applied General Equilibrium Tool (MAGNET) Agency/Company /Organization: LEI Wageningen UR, the Netherlands Complexity/Ease of Use: Moderate Related Tools Ex Ante Appraisal Carbon-Balance Tool (EX-ACT) Climate Rapid Overview and Decision Support (C-ROADS) Simulator Partnership for Economic Policy Modeling and Policy Impact Analysis (MPIA) ... further results Find Another Tool FIND DEVELOPMENT IMPACTS ASSESSMENT TOOLS A modular global computable general equilibrium model that covers the whole economy and has been used extensively in agricultural, environmental, and trade policy analysis; builds on the GTAP model, and is the successor of LEITAP. Approach MAGNET is based on the Global Trade Analysis Project (GTAP) model and

418

Overview Of Electromagnetic Methods Applied In Active Volcanic Areas Of  

Open Energy Info (EERE)

Of Electromagnetic Methods Applied In Active Volcanic Areas Of Of Electromagnetic Methods Applied In Active Volcanic Areas Of Western United States Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Overview Of Electromagnetic Methods Applied In Active Volcanic Areas Of Western United States Details Activities (7) Areas (2) Regions (0) Abstract: A better understanding of active volcanic areas in the United States through electromagnetic geophysical studies received foundation from the many surveys done for geothermal exploration in the 1970's. Investigations by governmental, industrial, and academic agencies include (but are not limited to) mapping of the Cascades. Long Valley/Mono area, the Jemez volcanic field, Yellowstone Park, and an area in Colorado. For one example - Mt. Konocti in the Mayacamas Mountains, California - gravity,

419

Remote Gas Well Monitoring Technology Applied to Marcellus Shale Site |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Remote Gas Well Monitoring Technology Applied to Marcellus Shale Remote Gas Well Monitoring Technology Applied to Marcellus Shale Site Remote Gas Well Monitoring Technology Applied to Marcellus Shale Site February 10, 2012 - 12:00pm Addthis Washington, DC - A technology to remotely monitor conditions at energy-rich Marcellus Shale gas wells to help insure compliance with environmental requirements has been developed through a research partnership funded by the U.S. Department of Energy (DOE). NETL-RUA researcher Dr. Michael McCawley hasdeveloped a technology to remotely monitor theenvironment around energy-rich Marcellus Shale gas wells. Photo courtesy of West Virginia University.The technology - which involves three wireless monitoring modules to measure volatile organic compounds, dust, light and sound - is currently being tested at a Marcellus

420

Geobotanical Remote Sensing Applied To Targeting New Geothermal Resource  

Open Energy Info (EERE)

Geobotanical Remote Sensing Applied To Targeting New Geothermal Resource Geobotanical Remote Sensing Applied To Targeting New Geothermal Resource Locations In The Us Basin And Range With A Focus On Dixie Meadows, Nv Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Geobotanical Remote Sensing Applied To Targeting New Geothermal Resource Locations In The Us Basin And Range With A Focus On Dixie Meadows, Nv Details Activities (1) Areas (1) Regions (0) Abstract: This paper presents an overview of the work our collaboration is doing to increase the detailed mapped resource base for geothermal exploration in the Western US. We are imaging several large areas in the western US with high resolution airborne hyperspectral and satellite multispectral sensors. We have now entered the phase where the remote sensing techniques and tools we are developing are mature enough to be

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

TopBP1 associates with NBS1 and is involved in homologous recombination repair  

SciTech Connect

TopBP1 is involved in DNA replication and DNA damage checkpoint. Recent studies have demonstrated that TopBP1 is a direct positive effecter of ATR. However, it is not known how TopBP1 recognizes damaged DNA. Here, we show that TopBP1 formed nuclear foci after exposure to ionizing radiation, but such TopBP1 foci were abolished in Nijmegen breakage syndrome cells. We also show that TopBP1 physically associated with NBS1 in vivo. These results suggested that NBS1 might regulate TopBP1 recruitment to the sites of DNA damage. TopBP1-depleted cells showed hypersensitivity to Mitomycin C and ionizing radiation, an increased frequency of sister-chromatid exchange level, and a reduced frequency of DNA double-strand break induced homologous recombination repair. Together, these results suggested that TopBP1 might be a mediator of DNA damage signaling from NBS1 to ATR and promote homologous recombination repair.

Morishima, Ken-ichi [Department of Radiation Biology, Research Institute for Radiation Biology and Medicine, Hiroshima University, 1-2-3 Kasumi, Minami-ku, Hiroshima 734-8553 (Japan); Sakamoto, Shuichi; Kobayashi, Junya [Department of Genome Dynamics, Radiation Biology Center, Kyoto University, Kyoto 606-8501 (Japan); Izumi, Hideki; Suda, Tetsuji; Matsumoto, Yoshiyuki [Department of Radiation Biology, Research Institute for Radiation Biology and Medicine, Hiroshima University, 1-2-3 Kasumi, Minami-ku, Hiroshima 734-8553 (Japan); Tauchi, Hiroshi [Department of Environmental Sciences, Ibaraki University, Mito, Ibaraki 310-8512 (Japan); Ide, Hiroshi [Department of Mathematical and Life Sciences, Graduate School of Science, Hiroshima University, Higashi-Hiroshima, Hiroshima 739-8562 (Japan); Komatsu, Kenshi [Department of Genome Dynamics, Radiation Biology Center, Kyoto University, Kyoto 606-8501 (Japan); Matsuura, Shinya [Department of Radiation Biology, Research Institute for Radiation Biology and Medicine, Hiroshima University, 1-2-3 Kasumi, Minami-ku, Hiroshima 734-8553 (Japan)], E-mail: shinya@hiroshima-u.ac.jp

2007-11-03T23:59:59.000Z

422

Enzymological and Structural Studies of the Mechanism of Promiscuous Substrate Recognition by the Oxidative DNA Repair Enzyme AlkB  

SciTech Connect

Promiscuous substrate recognition, the ability to catalyze transformations of chemically diverse compounds, is an evolutionarily advantageous, but poorly understood phenomenon. The promiscuity of DNA repair enzymes is particularly important, because it enables diverse kinds of damage to different nucleotide bases to be repaired in a metabolically parsimonious manner. We present enzymological and crystallographic studies of the mechanisms underlying promiscuous substrate recognition by Escherichia coli AlkB, a DNA repair enzyme that removes methyl adducts and some larger alkylation lesions from endocyclic positions on purine and pyrimidine bases. In vitro Michaelis-Menten analyses on a series of alkylated bases show high activity in repairing N1-methyladenine (m1A) and N3-methylcytosine (m3C), comparatively low activity in repairing 1,N6-ethenoadenine, and no detectable activity in repairing N1-methylguanine or N3-methylthymine. AlkB has a substantially higher kcat and Km for m3C compared with m1A. Therefore, the enzyme maintains similar net activity on the chemically distinct substrates by increasing the turnover rate of the substrate with nominally lower affinity. Cocrystal structures provide insight into the structural basis of this 'kcat/Km compensation,' which makes a significant contribution to promiscuous substrate recognition by AlkB. In analyzing a large ensemble of crystal structures solved in the course of these studies, we observed 2 discrete global conformations of AlkB differing in the accessibility of a tunnel hypothesized to control diffusion of the O2 substrate into the active site. Steric interactions between a series of protein loops control this conformational transition and present a plausible mechanism for preventing O2 binding before nucleotide substrate binding.

Yu, B.; Hunt, J

2009-01-01T23:59:59.000Z

423

Guidance for Federal Departments and Agencies on Establishing, Applying,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Guidance for Federal Departments and Agencies on Establishing, Guidance for Federal Departments and Agencies on Establishing, Applying, and Revising Categorical Exclusions Under the National Environmental Policy Act Guidance for Federal Departments and Agencies on Establishing, Applying, and Revising Categorical Exclusions Under the National Environmental Policy Act This guidance from the Council on Environmental Quality provides methods for substantiating categorical exclusions, clarifies the process for establishing categorical exclusions, outlines how agencies should engage the public when establishing and using categorical exclusions, describes how agencies can document the use of categorical exclusions, and recommends periodic agency review of existing categorical exclusions. Final Guidance for Federal Departments and Agencies on Establishing,

424

Guidance for Federal Departments and Agencies on Establishing, Applying,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

for Federal Departments and Agencies on Establishing, for Federal Departments and Agencies on Establishing, Applying, and Revising Categorical Exclusions Under the National Environmental Policy Act Guidance for Federal Departments and Agencies on Establishing, Applying, and Revising Categorical Exclusions Under the National Environmental Policy Act This guidance from the Council on Environmental Quality provides methods for substantiating categorical exclusions, clarifies the process for establishing categorical exclusions, outlines how agencies should engage the public when establishing and using categorical exclusions, describes how agencies can document the use of categorical exclusions, and recommends periodic agency review of existing categorical exclusions. Final Guidance for Federal Departments and Agencies on Establishing,

425

Process for applying control variables having fractal structures  

DOE Patents (OSTI)

A process and apparatus for the application of a control variable having a fractal structure to a body or process. The process of the present invention comprises the steps of generating a control variable having a fractal structure and applying the control variable to a body or process reacting in accordance with the control variable. The process is applicable to electroforming where first, second and successive pulsed-currents are applied to cause the deposition of material onto a substrate, such that the first pulsed-current, the second pulsed-current, and successive pulsed currents form a fractal pulsed-current waveform.

Bullock, IV, Jonathan S. (Oak Ridge, TN); Lawson, Roger L. (Oliver Springs, TN)

1996-01-01T23:59:59.000Z

426

C: Applying the Toyota Production System to a Hospital Pharmacy  

E-Print Network (OSTI)

This paper presents the early results of an action research project to apply the principles of the Toyota Production System to a hospital pharmacy. We demonstrate that work systems can be improved through Bowen and Spear’s [3] Rules-in-Use: defining activities better, making simpler and more direct connections, and/or smoothing pathways. We also extend this work by introducing a problem-solving tool to facilitate process improvement. The paper will describe the interventions attempted, the results, and implications for applying the Rules-in-Use to health care environments.

Durward K. Sobek; Cindy Jimmerson

2003-01-01T23:59:59.000Z

427

Repair and Strengthening by Use of Superficial Fixed Laminates of Cracked Masonry Walls Sheared Horizontally-Laboratory Tests  

Science Conference Proceedings (OSTI)

There are many methods of crack repairing in masonry structures. One of them is repair and strengthening by using of superficial fixed laminates, especially in case of masonry walls with plastering on their both sides. The initial laboratory tests of three different types of strengthening of diagonal cracked masonry wallettes are presented. Tests concerned three clay brick masonry walls subjected to horizontal shearing with two levels of precompression and strengthened by flexible polymer injection, superficial glass fixed by polymer fibre laminate plates and using of CRFP strips stiff fixed to the wall surface by polymer and stiff resin epoxy fixing are presented and discussed.

Kubica, Jan [Department of Structural Engineering, Silesian University of Technology, Akademicka 5, PL-44-100 Gliwice (Poland); Kwiecien, Arkadiusz; Zajac, Boguslaw [Department of Civil Engineering, Cracow University of Technology, Warszawska 24, PL-31-155 Krakow (Poland)

2008-07-08T23:59:59.000Z

428

Planning and care mark repair of 14-year old leak in Kuwait Oil Co. LPG tank 95  

SciTech Connect

This paper points out that the leak, which had been present for such a long time, completely saturated the perlite insulation with hydrocarbons, thus rendering the entire operation of inspection, repair, and maintenance of the inner tank a hazardous operation. It emphasizes the safety aspects, which were complicated by the saturated perlite as well as by the fact that the tank is situated in the middle of the LPG storage area with LPG tanks on either side. Tank design, making preparations, inspection, and repair are discussed. The fact that the leaking flanges were originally installed damaged, indicated the future need of tighter company quality control of all contractors work.

Shtayieh, S.

1983-01-10T23:59:59.000Z

429

Subj: Educational and General (E&G) Facility Support Provide an overview of Facility Operations, Maintenance, Repair and Renovation and Space  

E-Print Network (OSTI)

and infrastructure. Facilities Energy & Utilities: Energy and Utilities is responsible for campus-wide utility and maintain this system and its components. Deferred Maintenance: Given the age of buildings and the wear buildings and infrastructure in working order. Minor and Major Repairs: Generally, minor repairs include

Pohl, Karsten

430

Bio 3A -Applying to Health Professional Schools Dental Schools  

E-Print Network (OSTI)

Bio 3A - Applying to Health Professional Schools Dental Schools Admission Requirements and Helpful Requirements: Biology (w/lab) 1 to 1 1/2 years (At UCI Bio 93, 94, 97, 98, 99, *100 minimum). Many schools will require 3 labs. *BioSci 100 is a prerequisite for taking Bio labs at UCI. Some schools will require

Barrett, Jeffrey A.

431

Bio 3A -Applying to Health Professional Schools Pharmacy Schools  

E-Print Network (OSTI)

Bio 3A - Applying to Health Professional Schools Pharmacy Schools Admission Requirements individual web sites. Pharmacy School Admission Requirements: Biology (w/lab) Bio 93, 94*, 97, 98, 99, 100, E not be an interpersonal communication course) ­ not offered at UCI *Bio 94 is the prerequisite of Bio 97, but not required

Barrett, Jeffrey A.

432

A Test Calculus Framework applied to network security policies  

E-Print Network (OSTI)

A Test Calculus Framework applied to network security policies Yli`es Falcone1 , Jean'H`eres, France Abstract. We propose a syntax-driven test generation technique to au- tomaticaly derive abstract test cases from a set of requirements expressed in a linear temporal logic. Assuming that an elementary

Paris-Sud XI, Université de

433

Applying Bayesian Network Techniques to Prioritize Lean Six Sigma Efforts  

Science Conference Proceedings (OSTI)

In order to retain competitive advantages, many manufacturing organizations have applied Lean Six Sigma techniques to improve production processes. The general approach for implementing Lean Six Sigma is to perform various projects to tackle specific ... Keywords: Bayesian Network, Cause-and-Effect Relationships, Events of Interest, Lean, Probabilistic Inference, Six Sigma

Yanzhen Li, Rapinder S. Sawhne, Joseph H. Wilck

2013-04-01T23:59:59.000Z

434

Proceedings of the 2005 ACM symposium on Applied computing  

Science Conference Proceedings (OSTI)

Welcome to the 20th Annual ACM Symposium on Applied Computing (SAC 2005) hosted by the New Mexico Institute of Mining and Technology, Socorro, New Mexico, USA. As the Conference Chair and on behalf of the organizing committee, thank you for participating ...

Hisham M. Haddad; Andrea Omicini; Roger L. Wainwright; Lorie M. Liebrock

2005-03-01T23:59:59.000Z

435

Applying High Performance Computing to Analyzing by Probabilistic Model Checking  

E-Print Network (OSTI)

Applying High Performance Computing to Analyzing by Probabilistic Model Checking Mobile Cellular on the use of high performance computing in order to analyze with the proba- bilistic model checker PRISM. The Figure Generation Script 22 2 #12;1. Introduction We report in this paper on the use of high performance

Schneider, Carsten

436

Book review Carbon Nanotube Science: Synthesis, Properties and Appli-  

E-Print Network (OSTI)

Book review Carbon Nanotube Science: Synthesis, Properties and Appli- cations, Peter J.F. Harris in the nanotube discovery is dis- cussed in the first chapter of this book), a few years after ful- lerenes were of the nanotechnology era ­ you'll find their pictures on book covers, in newspaper articles and magazine centerfolds

Harris, Peter J F

437

Applying General Access Structure to Metering Ventzislav Nikov  

E-Print Network (OSTI)

Applying General Access Structure to Metering Schemes Ventzislav Nikov Department of Mathematics.vandewalle@esat.kuleuven.ac.be Abstract In order to decide on advertisement fees for web servers, Naor and Pinkas introduced metering number of clients. Several researchers have generalized the idea of Naor and Pinkas: #12;rst metering

International Association for Cryptologic Research (IACR)

438

Applying General Access Structure to Metering Ventzislav Nikov  

E-Print Network (OSTI)

Applying General Access Structure to Metering Schemes Ventzislav Nikov Department of Mathematics.vandewalle@esat.kuleuven.ac.be Abstract In order to decide on advertisement fees for web servers, Naor and Pinkas introduced metering number of clients. Several researchers have generalized the idea of Naor and Pinkas: first metering

International Association for Cryptologic Research (IACR)

439

Modeling and simulation applied in modernization of energy production plants  

Science Conference Proceedings (OSTI)

The present work presents a methodology that has been developed and successfully applied to support the information requirements of engineers in charge of the operation, modernization, and/or maintenance of energy production plants (power, oil and gas). ... Keywords: CAD software, energy production, engineering design and data management, industrial plant, operation and maintenance support

Jesús Vázquez Bustos; Benjamín Eddie Zayas Pérez

2011-06-01T23:59:59.000Z

440

A companion modelling approach applied to forest management planning  

Science Conference Proceedings (OSTI)

To assist the Societe Civile des Terres du Larzac (SCTL) in its effort to develop alternative forest management plans, a group of researchers and extension officers proposed applying a companion modelling approach. The objective was to support forest ... Keywords: Companion modelling, Forest management, Livestock farming, Multi-agent system, Participatory modelling

C. Simon; M. Etienne

2010-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Neutron activation analysis applied to energy and environment  

SciTech Connect

Neutron activation analysis was applied to a number of problems concerned with energy production and the environment. Burning of fossil fuel, the search for new sources of uranium, possible presence of toxic elements in food and water, and the relationship of trace elements to cardiovascular disease are some of the problems in which neutron activation was used. (auth)

Lyon, W.S.

1975-01-01T23:59:59.000Z

442

BEP project for Applied Mathematics/Applied Physics double degree Numerical solution of a three-dimensional electromagnetic  

E-Print Network (OSTI)

-dimensional electromagnetic force field Imagine a quadratic piece of metal, which is subject to a static current flux at its top boundary and insulated at the bottom. Assuming the current flux to be of Gaussian shape and applying suitable boundary conditions, we can derive equations to describe the current flux in the metal

Vuik, Kees

443

A Quick Guide for Applying at Mason Applying online is as easy as 1-2-3!  

E-Print Network (OSTI)

Jobs" from the quick links.. You can search jobs in the following ways: · Keywords - enter your own search terms · Posted Within - a drop-down list will appear ­ select from day, week, or month Innovation Is Tradition Page 1 of 6 11/15/2012 #12;A Quick Guide for Applying at Mason Step 1: Search

444

Evaluating the Yield of Repairable SRAMs for Marco Ottavi, Member, IEEE, Luca Schiano, Student Member, IEEE, Xiaopeng Wang Member, IEEE,  

E-Print Network (OSTI)

the different processes for preserving the quality of the shipped product. An accurate estimate of the yield (i issues revolving around cost-effective BIST and ATE-based solutions for higher test transparency Equipment (ATE) application. The first method is based on the sum of probabilities of all repairable fault

Ayers, Joseph

445

International Institute for Applied Systems Analysis | Open Energy  

Open Energy Info (EERE)

Analysis Analysis Jump to: navigation, search Logo: International Institute for Applied Systems Analysis Name International Institute for Applied Systems Analysis Address Schlossplatz 1, A-2361 Place Laxenburg, Austria Number of employees 201-500 Year founded 1972 Phone number (+43 2236) 807 0 Coordinates 48.0682549°, 16.358201° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.0682549,"lon":16.358201,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

446

Argonne applied mathematicians use INCITE awards to attack energy problems  

NLE Websites -- All DOE Office Websites (Extended Search)

Argonne applied mathematicians use INCITE awards to attack energy problems Argonne applied mathematicians use INCITE awards to attack energy problems March 27, 2013 Tweet EmailPrint What is the best possible power grid configuration for our nation? How can we balance the increasing demands for power while minimizing costs and avoiding waste of resources? Last year, Mihai Anitescu, a computational mathematician in Argonne's Mathematics and Computer Science Division. received DOE funding to establish the Multifaceted Mathematics for Complex Energy Systems (M2ACS) to tackle these questions. As part of the M2ACS research, Anitescu and his colleagues at Argonne are focusing on ways to optimize the effects of randomly changing variables, say, in wind or resource demand. Such variables can number into the billions. And to be useful for energy systems planning, any calculations

447

Generative Design Systems Applied to Low-Energy Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Generative Design Systems Applied to Low-Energy Buildings Generative Design Systems Applied to Low-Energy Buildings Speaker(s): Maria Luisa de Oliveira Gama Caldas Date: March 15, 2012 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Paul Mathew Generative Design Systems (GDS) represent a step beyond parametric models, integrating design goals, building simulations and shape generation. In this seminar, present and future research projects on the application of different GDS to low-energy buildings are discussed. The software GENE_ARCH integrates energy simulations with multicriteria search methods such as pareto genetic algorithms, to locate acceptable alternatives that move the current design towards performance goals set by the user. DIVA, a system that integrates parametric geometrical modeling with Radiance, Daysim and

448

Environmental Impact and Sustainability Applied General Equilibrium Model  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » Environmental Impact and Sustainability Applied General Equilibrium Model (ENVISAGE) Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: Environmental Impact and Sustainability Applied General Equilibrium Model (ENVISAGE) Agency/Company /Organization: World Bank Sector: Climate Topics: Analysis Tools Complexity/Ease of Use: Advanced Website: go.worldbank.org/ZC77UJYJ50 Related Tools TransportToolkit Prototype Threshold 21 Model General Equilibrium Modeling Package (GEMPACK) ... further results Designed to analyze a variety of issues related to the economics of climate

449

Applied Super Conductor Group, Oxide Molecular Beam Epitaxy Group,  

NLE Websites -- All DOE Office Websites (Extended Search)

AEMG Homepage AEMG Homepage Site Details Homepage Research Publications Presentations Facilities How to Contact Us Other Information Basic Energy Sciences Directorate Links BNL Site Index Can't View PDFs? Advanced Energy Materials Group Applied Superconductivity The applied superconductivity research (past funded by DOE Office of Electricity Delivery and Energy Reliability) is related to modernization of the U.S. power grid. One direction of the modernization is replacement of normal metal (copper, aluminum) transmission lines with High Temperature Superconducting (HTS) cables. Our group concentrates its effort on studying fundamental thermodynamics of nucleation and texture development of thick YBCO layers. High-performance YBCO layer is a critical element of modern second generation (2G) HTS wire.

450

Fifth SIAM conference on applied linear algebra. Final report  

SciTech Connect

The SIAM Conferences on Applied Linear Algebra are the centerpiece of activities for the SIAG on Linear Algebra. They are held every three years and bring together a diverse group of applied linear algebraists, representing industry, government and academics in both matrix theory and matrix computations. This sequence of conferences has two related goals: (1) to be useful and interesting to linear algebraists of every area of specialization, and, (2) to develop and expose connections among problems in different areas. Many aspects of the 1994 conference were carefully chosen to enhance interchange between the various groups and yet still provide a solid focus on specialities. The organizing committee adopted a new meeting structure to resolve the conflict between these two goals at earlier meetings in the series. We have prepared this report for others who may wish to consider our structure as an alternative to more traditional arrangements.

Lewis, J.G.; Gilbert, J.R.; Parlett, B.N.

1994-11-16T23:59:59.000Z

451

Applied Science Division annual report, Environmental Research Program FY 1983  

Science Conference Proceedings (OSTI)

The primary concern of the Environmental Research Program is the understanding of pollutant formation, transport, and transformation and the impacts of pollutants on the environment. These impacts include global, regional, and local effects on the atmosphere and hydrosphere, and on certain aspects of human health. This multidisciplinary research program includes fundamental and applied research in physics, chemistry, engineering, and biology, as well as research on the development of advanced methods of measurement and analysis. During FY 1983, research concentrated on atmospheric physics and chemistry, applied physics and laser spectroscopy, combustion theory and phenomena, environmental effects of oil shale processing, freshwater ecology and acid precipitation, trace element analysis for the investigation of present and historical environmental impacts, and a continuing survey of instrumentation for environmental monitoring.

Cairns, E.J.; Novakov, T.

1984-05-01T23:59:59.000Z

452

Magnetic response to applied electrostatic field in external magnetic field  

E-Print Network (OSTI)

We show, within QED and other possible nonlinear theories, that a static charge localized in a finite domain of space becomes a magnetic dipole, if it is placed in an external (constant and homogeneous) magnetic field in the vacuum. The magnetic moment is quadratic in the charge, depends on its size and is parallel to the external field, provided the charge distribution is at least cylindrically symmetric. This magneto-electric effect is a nonlinear response of the magnetized vacuum to an applied electrostatic field. Referring to a simple example of a spherically-symmetric applied field, the nonlinearly induced current and its magnetic field are found explicitly throughout the space, the pattern of lines of force is depicted, both inside and outside the charge, which resembles that of a standard solenoid of classical magnetostatics.

T. C. Adorno; D. M. Gitman; A. E. Shabad

2013-11-16T23:59:59.000Z

453

1984 Review of the Applied Plasma Physics Program  

SciTech Connect

This report describes the present and planned programs of the Division of Applied Plasma Physics (APP), Office of Fusion Energy. The major activities of the division include fusion theory, experimental plasma research, advanced fusion concepts, and the magnetic fusion energy computer network. The planned APP program is consistent with the recently issued Comprehensive Program Management Plan for Magnetic Fusion Energy, which describes the overall objectives and strategy for the development of fusion energy.

1984-09-01T23:59:59.000Z

454

Repair, sidetrack, drilling, and completion of EE-2A for Phase 2 reservoir production service  

DOE Green Energy (OSTI)

Hot Dry Rock (HDR) geothermal energy well EE-2 at Fenton Hill, New Mexico, was sidetracked and redrilled into the HDR Phase II reservoir after two unsuccessful attempts to repair damage in the lower wellbore. Before sidetracking was begun, six cement slurries were pumped to plug the abandoned lower wellbore and to support the production casing where drilling wear was predicted and where sidetracking was to occur. This work and the redrill of EE-2A were completed in November 1987. Specifications were prepared for a state-of-the-art tie-back casing, which was procured, manufactured, and delivered to Fenton Hill in May 1988. The well was then completed in June 1988 for hot-water production service by cementing in a liner and the upper section of production casing and installing and cementing a tie-back casing string. 24 refs., 17 figs., 5 tabs.

Dreesen, D.S.; Cocks, G.G.; Nicholson, R.W.; Thomson, J.C.

1989-08-01T23:59:59.000Z

455

Sodium-Bearing Waste Treatment, Applied Technology Plan  

SciTech Connect

Settlement Agreement between the Department of Energy and the State of Idaho mandates treatment of sodium-bearing waste at the Idaho Nuclear Technology and Engineering Center within the Idaho National Engineering and Environmental Laboratory. One of the requirements of the Settlement Agreement is to complete treatment of sodium-bearing waste by December 31, 2012. Applied technology activities are required to provide the data necessary to complete conceptual design of four identified alternative processes and to select the preferred alternative. To provide a technically defensible path forward for the selection of a treatment process and for the collection of needed data, an applied technology plan is required. This document presents that plan, identifying key elements of the decision process and the steps necessary to obtain the required data in support of both the decision and the conceptual design. The Sodium-Bearing Waste Treatment Applied Technology Plan has been prepared to provide a description/roadmap of the treatment alternative selection process. The plan details the results of risk analyzes and the resulting prioritized uncertainties. It presents a high-level flow diagram governing the technology decision process, as well as detailed roadmaps for each technology. The roadmaps describe the technical steps necessary in obtaining data to quantify and reduce the technical uncertainties associated with each alternative treatment process. This plan also describes the final products that will be delivered to the Department of Energy Idaho Operations Office in support of the office's selection of the final treatment technology.

Lance Lauerhass; Vince C. Maio; S. Kenneth Merrill; Arlin L. Olson; Keith J. Perry

2003-06-01T23:59:59.000Z

456

A tribological and biomimetic study of potential bone joint repair materials  

E-Print Network (OSTI)

This research investigates materials for bone-joint failure repair using tribological and biomimicking approaches. The materials investigated represent three different repairing strategies. Refractory metals with and without treatment are candidates for total joint replacements due to their mechanical strength, high corrosion resistance and biocompatibility. A composite of biodegradable polytrimethylene carbonate, hydroxyl apatite, and nanotubes was investigated for application as a tissue engineering scaffold. Non-biodegradable polymer polyimide combined with various concentrations of nanotubes was investigated as a cartilage replacement material. A series of experimental approaches were used in this research. These include analysis of material surfaces and debris using high-resolution techniques and tribological experiments, as well as evaluation of nanomechanical properties. Specifically, the surface structure and wear mechanisms were investigated using a scanning electron microscope and an atomic force microscope. Debris morphology and structure was investigated using a transmission electron microscope. The debris composition was analyzed using an X-ray diffractometer. Nanoindentation was incorporated to investigate the surface nanomechanical properties. Polytrimythelene carbonate combined with hydroxyapatite and nanotubes exhibited a friction coefficient lower than UHMWPE. The nanoindentation response mimicked cartilage more closely than UHMWPE. A composite formed with PI and nanotubes showed a varying friction coefficient and varying nanoindentation response with variation in nanotube concentration. Low friction coefficients corresponded with low modulus values. A theory was proposed to explain this behavior based on surface interactions between nanotubes and between nanotubes and PI. A model was developed to simulate the modulus as a function of nanotube concentration. The boronized refractory metals exhibited brittleness and cracking. Higher friction coefficients were associated with the formation of amorphous debris. The friction coefficient for boronized Cr (~0.06) under simulated body fluid conditions was in the range found in natural joints.

Ribeiro, Rahul

2006-12-01T23:59:59.000Z

457

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

51 - 14360 of 29,416 results. 51 - 14360 of 29,416 results. Download CX-010848: Categorical Exclusion Determination 300 square feet of Modified Bitumen Roof Repair CX(s) Applied: B1.3 Date: 07/23/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-010848-categorical-exclusion-determination Download CX-010849: Categorical Exclusion Determination Temporary Removal of the Tank 12 Purge Exhaust Reheater via HTF-TMC-13-028 CX(s) Applied: B1.3 Date: 07/23/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-010849-categorical-exclusion-determination Download CX-010850: Categorical Exclusion Determination Install Well Pump into the F-Tank Farm Catch Tank FL-241901-WTS-TK-1

458

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31 - 18240 of 26,764 results. 31 - 18240 of 26,764 results. Download CX-003662: Categorical Exclusion Determination Hygiene Substation Access Road Repairs CX(s) Applied: B1.3, B4.6 Date: 08/30/2010 Location(s): Boulder County, Colorado Office(s): Western Area Power Administration-Rocky Mountain Region http://energy.gov/nepa/downloads/cx-003662-categorical-exclusion-determination Download CX-003507: Categorical Exclusion Determination State Energy Program American Recovery and Reinvestment Act: Solar Power Incorporated Photovoltaic Panel Manufacturing Facility CX(s) Applied: B1.31, B5.1 Date: 08/27/2010 Location(s): McClellan, California Office(s): Energy Efficiency and Renewable Energy, Golden Field Office http://energy.gov/nepa/downloads/cx-003507-categorical-exclusion-determination Download CX-003508: Categorical Exclusion Determination

459

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31 - 21440 of 31,917 results. 31 - 21440 of 31,917 results. Download CX-008938: Categorical Exclusion Determination An Advanced Joint Inversion System for Carbon Dioxide Storage Modeling with Large Data Sets for Characterization CX(s) Applied: A1, A9 Date: 08/17/2012 Location(s): California Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-008938-categorical-exclusion-determination Download CX-008942: Categorical Exclusion Determination Site-Wide Sidewalk Improvements and Seal and Repair Pavement CX(s) Applied: B1.3 Date: 08/17/2012 Location(s): West Virginia Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-008942-categorical-exclusion-determination Download CX-008943: Categorical Exclusion Determination B-33 Facility & Heating, Ventilation, and Air Conditioning Renovations

460

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 12390 of 28,905 results. 81 - 12390 of 28,905 results. Download CX-007772: Categorical Exclusion Determination Idaho National Laboratory Asphalt Repair Project - North Wind Services, LLC CX(s) Applied: B1.3 Date: 11/28/2011 Location(s): Idaho Offices(s): Nuclear Energy, Idaho Operations Office http://energy.gov/nepa/downloads/cx-007772-categorical-exclusion-determination Download CX-009522: Categorical Exclusion Determination Nevada-City-North Las Vegas CX(s) Applied: A1, A9, B1.32, B2.5, B5.1 Date: 11/15/2012 Location(s): Nevada Offices(s): Energy Efficiency and Renewable Energy http://energy.gov/nepa/downloads/cx-009522-categorical-exclusion-determination Download TEC Working Group Topic Groups Tribal Conference Call Summaries http://energy.gov/em/downloads/tec-working-group-topic-groups-tribal-conference-call-summaries

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

01 - 17910 of 26,764 results. 01 - 17910 of 26,764 results. Download CX-006140: Categorical Exclusion Determination Revised Market Title for Energy Efficiency Program for Municipalities, Schools, Hospitals, Public Colleges CX(s) Applied: A9, A11, B5.1 Date: 06/14/2011 Location(s): New York Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-006140-categorical-exclusion-determination Download CX-001125: Categorical Exclusion Determination Blading of Washed Out Access Road and Repairing the Washed Out Area Inside the Substation Fence CX(s) Applied: B1.3 Date: 11/12/2009 Location(s): Mohave County, Arizona Office(s): Western Area Power Administration-Desert Southwest Region http://energy.gov/nepa/downloads/cx-001125-categorical-exclusion-determination

462

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31 - 9340 of 28,560 results. 31 - 9340 of 28,560 results. Download CX-007507: Categorical Exclusion Determination Record of Categorical Exclusion for Inspection and Repair of West Hackberry-SUN 42-inch Crude Oil Pipeline CX(s) Applied: B1.3 Date: 11/28/2011 Location(s): Louisiana Offices(s): Strategic Petroleum Reserve Field Office http://energy.gov/nepa/downloads/cx-007507-categorical-exclusion-determination Download CX-007508: Categorical Exclusion Determination Record of Categorical Exclusion for Rework Bryan Mound Seaway Dock Terminal Bypass Valve MOV-C308 CX(s) Applied: B1.3 Date: 11/16/2011 Location(s): Texas Offices(s): Strategic Petroleum Reserve Field Office http://energy.gov/nepa/downloads/cx-007508-categorical-exclusion-determination Download CX-007509: Categorical Exclusion Determination

463

Categorical Exclusion Determinations: B1.13 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

19, 2011 19, 2011 CX-005684: Categorical Exclusion Determination Construction and Operation of a Cask Processing Enclosure (CPE) at the Transuranic (TRU) Waste Processing Center (TWPC) on the Oak Ridge Reservation, Lenoir City, Tennessee CX(s) Applied: B1.13, B3.1, B6.6 Date: 04/19/2011 Location(s): Lenoir City, Tennessee Office(s): Oak Ridge Office April 19, 2011 CX-006384: Categorical Exclusion Determination Construction and Operation of a Cask Processing Enclosure at the Transuranic Waste Processing Center on the Oak Ridge Reservation, Lenoir City, Tennessee CX(s) Applied: B1.13, B3.1, B6.6 Date: 04/19/2011 Location(s): Lenoir City, Tennessee Office(s): Environmental Management, Oak Ridge Office March 23, 2011 CX-005855: Categorical Exclusion Determination Sidewalks Repair at 704-23K and 701-12K

464

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

91 - 10600 of 31,917 results. 91 - 10600 of 31,917 results. Download CX-004470: Categorical Exclusion Determination Relocation of Laboratory on Morgantown Site from B25/102 to B4/112 CX(s) Applied: B3.6 Date: 11/18/2010 Location(s): Morgantown, West Virginia Office(s): Fossil Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-004470-categorical-exclusion-determination Download CX-004401: Categorical Exclusion Determination The Use of Scrap Tires for Oil Well Stimulation CX(s) Applied: B3.6 Date: 11/08/2010 Location(s): Waynesburg, Pennsylvania Office(s): Fossil Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-004401-categorical-exclusion-determination Download CX-004400: Categorical Exclusion Determination Repair Brick Support Plates on Connecting Bridges - Building 58

465

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

691 - 25700 of 31,917 results. 691 - 25700 of 31,917 results. Download CX-005799: Categorical Exclusion Determination Repair of Fire Water Line Near 254-13F CX(s) Applied: B1.3 Date: 04/06/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005799-categorical-exclusion-determination Download CX-005800: Categorical Exclusion Determination Detoxification of Uranium in Soils and Groundwater Using Recycled Concrete CX(s) Applied: B3.6 Date: 04/05/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005800-categorical-exclusion-determination Download CX-005801: Categorical Exclusion Determination Polymer Synthesis, Corrosion, and Electrochemical Tests in Lab D-0115

466

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

61 - 4270 of 9,640 results. 61 - 4270 of 9,640 results. Download CX-008911: Categorical Exclusion Determination Pittsburgh B83 Boiler Room Ventilation/Cooling Project CX(s) Applied: B2.1, B2.2, B2.3 Date: 08/29/2012 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-008911-categorical-exclusion-determination Download CX-008912: Categorical Exclusion Determination An Advanced Joint Inversion System for Carbon Dioxide Storage Modeling with Large Data Sets for Characterization CX(s) Applied: A1, A9 Date: 08/29/2012 Location(s): California Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-008912-categorical-exclusion-determination Download CX-008913: Categorical Exclusion Determination High Resolution 3D Laser Imaging for Inspection, Maintenance, Repair and

467

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

61 - 10570 of 26,764 results. 61 - 10570 of 26,764 results. Download CX-004099: Categorical Exclusion Determination Advanced Energy Efficient Building Technologies for High Performance Hospitals CX(s) Applied: A9 Date: 09/30/2010 Location(s): Eugene, Oregon Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-004099-categorical-exclusion-determination Download CX-004100: Categorical Exclusion Determination High Resolution Three-Dimensional Laser Imaging for Inspection, Maintenance, Repair and Operations CX(s) Applied: B3.6 Date: 09/30/2010 Location(s): Boulder, Colorado Office(s): Fossil Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-004100-categorical-exclusion-determination Download CX-004105: Categorical Exclusion Determination

468

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

51 - 9660 of 28,560 results. 51 - 9660 of 28,560 results. Download CX-006637: Categorical Exclusion Determination Repair Storm Water Drainage Outside the T-Area Cap CX(s) Applied: B1.3 Date: 08/10/2011 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-006637-categorical-exclusion-determination Download CX-006636: Categorical Exclusion Determination Removal and Disposition of Mini Melter in 786-A CX(s) Applied: B1.23 Date: 08/08/2011 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-006636-categorical-exclusion-determination Download CX-006633: Categorical Exclusion Determination Install a Portable Generator to Supply Electrical Power to the 241-74F Switchgear Bus

469

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

51 - 6860 of 28,905 results. 51 - 6860 of 28,905 results. Download CX-006609: Categorical Exclusion Determination EM-31 Alternative Chemical Cleaning (ACC) Program CX(s) Applied: B3.6 Date: 05/24/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-006609-categorical-exclusion-determination Download CX-002534: Categorical Exclusion Determination Repair 4-Inch Domestic Water Header, Z-Area CX(s) Applied: B1.3 Date: 05/12/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-002534-categorical-exclusion-determination Download CX-002537: Categorical Exclusion Determination Measurement of Distribution Coefficients for Z-Area Industrial Solid Waste

470

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 4790 of 26,777 results. 81 - 4790 of 26,777 results. Download CX-001134: Categorical Exclusion Determination Repair Water Leak in L-Area Valve 075 CX(s) Applied: B1.3 Date: 03/04/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-001134-categorical-exclusion-determination Download CX-001018: Categorical Exclusion Determination Internal Short Circuits in Lithium-Ion Cells for Plug-In Electric Vehicle (PHEV) CX(s) Applied: B3.6 Date: 03/04/2010 Location(s): Cambridge, Massachusetts Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-001018-categorical-exclusion-determination Download CX-005147: Categorical Exclusion Determination

471

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

21 - 21830 of 26,764 results. 21 - 21830 of 26,764 results. Download CX-007509: Categorical Exclusion Determination Record of Categorical Exclusion for Use of RW Surge Line to Big Hill Anhydrite Pond for Raw Water Intake Structure Recycle CX(s) Applied: B1.3 Date: 11/28/2011 Location(s): Texas Offices(s): Strategic Petroleum Reserve Field Office http://energy.gov/nepa/downloads/cx-007509-categorical-exclusion-determination Download CX-007510: Categorical Exclusion Determination Record of Categorical Exclusion for Tear Down, Inspect and Repair Bayou Choctaw Brine Filters at BDW Pad 1 CX(s) Applied: B1.3 Date: 11/29/2011 Location(s): Louisiana Offices(s): Strategic Petroleum Reserve Field Office http://energy.gov/nepa/downloads/cx-007510-categorical-exclusion-determination Download CX-007511: Categorical Exclusion Determination

472

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 5790 of 8,172 results. 81 - 5790 of 8,172 results. Download CX-004105: Categorical Exclusion Determination High Resolution Three-Dimensional Laser Imaging for Inspection, Maintenance, Repair and Operations CX(s) Applied: B3.6 Date: 09/30/2010 Location(s): Houston, Texas Office(s): Fossil Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-004105-categorical-exclusion-determination Download CX-004106: Categorical Exclusion Determination Green Oil: Carbon Dioxide Enhanced Oil Recovery for America?s Small Oil Producers CX(s) Applied: A9 Date: 09/30/2010 Location(s): Socorro, New Mexico Office(s): Fossil Energy, National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-004106-categorical-exclusion-determination Download CX-004108: Categorical Exclusion Determination

473

Categorical Exclusion Determinations: Arizona | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Arizona Arizona Categorical Exclusion Determinations: Arizona Location Categorical Exclusion Determinations issued for actions in Arizona. DOCUMENTS AVAILABLE FOR DOWNLOAD September 13, 2013 CX-010988: Categorical Exclusion Determination High Temperature DC-Bus Capacitors Cost Reduction and Performance Improvements CX(s) Applied: B3.6, B5.15 Date: 09/13/2013 Location(s): Arizona Offices(s): National Energy Technology Laboratory August 22, 2013 CX-010882: Categorical Exclusion Determination Liberty-Parker Dam #2 230-Kilovolt Transmission Line, Optical Power Ground Wire Repair CX(s) Applied: B4.7 Date: 08/22/2013 Location(s): Arizona Offices(s): Western Area Power Administration-Desert Southwest Region August 12, 2013 CX-010883: Categorical Exclusion Determination PHX-LOB and LIB-LOB 230-Kilovolt Double-Circuit- Replace Insulators at

474

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

41 - 25750 of 31,917 results. 41 - 25750 of 31,917 results. Download CX-001369: Categorical Exclusion Determination Repair Firewater Line in B-Area East Side (Road C-2) near Post Indicator Valve 2118 CX(s) Applied: B1.3 Date: 03/16/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-001369-categorical-exclusion-determination Download CX-001371: Categorical Exclusion Determination Synthetic Concentrators CX(s) Applied: B3.6 Date: 03/16/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-001371-categorical-exclusion-determination Download CX-001182: Categorical Exclusion Determination Access Road Improvement Project for Structure 12/1 of the Snoking Tap to

475

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

51 - 27360 of 28,904 results. 51 - 27360 of 28,904 results. Download CX-007673: Categorical Exclusion Determination Edible Oil Deployment for Enhanced Chlorinated Volatile Organic Compounds Attenuation at the M Area Abandoned Process Sewer Line CX(s) Applied: B3.1 Date: 10/25/2011 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-007673-categorical-exclusion-determination Download CX-007675: Categorical Exclusion Determination Repair of Fire Water Line Near 254-13F CX(s) Applied: B1.3 Date: 10/20/2011 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-007675-categorical-exclusion-determination Article DOE-Supported Education and Training Programs Help Crow Tribe Promote Energy Independence and Education

476

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

28, 2011 28, 2011 CX-007772: Categorical Exclusion Determination Idaho National Laboratory Asphalt Repair Project - North Wind Services, LLC CX(s) Applied: B1.3 Date: 11/28/2011 Location(s): Idaho Offices(s): Nuclear Energy, Idaho Operations Office November 28, 2011 CX-007771: Categorical Exclusion Determination Nuclear Energy University Programs Minor Reactor Upgrade Request for Enhancement of Safety and Operational Monitoring Systems and Research Capabilities of the Ohio State University Nuclear Reactor Laboratory CX(s) Applied: B2.2 Date: 11/28/2011 Location(s): Ohio Offices(s): Nuclear Energy, Idaho Operations Office November 28, 2011 CX-007770: Categorical Exclusion Determination Meeting Nuclear Uniform Curriculum Program Requirements with Equipment Investments - Lakeshore Technical College

477

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 13490 of 26,764 results. 81 - 13490 of 26,764 results. Download CX-009353: Categorical Exclusion Determination The Sustainability Workshop (Energy Regional Innovation Cluster) CX(s) Applied: A9 Date: 09/20/2012 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-009353-categorical-exclusion-determination Download CX-009354: Categorical Exclusion Determination High Resolution 3D Laser Imaging for Inspection, Maintenance, Repair and Operations - Phase II CX(s) Applied: A9, A11, B3.6 Date: 09/20/2012 Location(s): Colorado Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-009354-categorical-exclusion-determination Download CX-009355: Categorical Exclusion Determination Building 922 Ice Melt/Heat Trace Project

478

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

41 - 11350 of 28,905 results. 41 - 11350 of 28,905 results. Download CX-005422: Categorical Exclusion Determination La Pine Chiloquin and Brasada Harney Number 1 Transmission Line Right-of-Ways CX(s) Applied: B1.3 Date: 03/15/2011 Location(s): Klamath County, Oregon Office(s): Bonneville Power Administration http://energy.gov/nepa/downloads/cx-005422-categorical-exclusion-determination Download CX-005847: Categorical Exclusion Determination Rocky Reach - Maple Valley Access Road Repair CX(s) Applied: B1.3 Date: 05/05/2011 Location(s): King County, Washington Office(s): Bonneville Power Administration http://energy.gov/nepa/downloads/cx-005847-categorical-exclusion-determination Download Audit Report: OAS-L-03-19 Audit of Recurring Acquisitions at the Chicago Operations Office http://energy.gov/ig/downloads/audit-report-oas-l-03-19

479

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 9890 of 28,560 results. 81 - 9890 of 28,560 results. Download CX-005531: Categorical Exclusion Determination Repair a Leaking Duct Flange in F/H Lab CX(s) Applied: B1.3 Date: 01/26/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005531-categorical-exclusion-determination Download CX-005533: Categorical Exclusion Determination K-Area Entrance Roadway Expansion CX(s) Applied: B1.13 Date: 01/26/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005533-categorical-exclusion-determination Download CX-005536: Categorical Exclusion Determination Rework Fire-rated Penetration Seal Per F-DCF-H-00591HB-Line Room 602A Floor

480

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31 - 8240 of 26,764 results. 31 - 8240 of 26,764 results. Download CX-003594: Categorical Exclusion Determination Replace Bayou Choctaw Timber Pile Pipe Supports CX(s) Applied: B1.3 Date: 08/24/2010 Location(s): Bayou Choctaw, Louisiana Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office http://energy.gov/nepa/downloads/cx-003594-categorical-exclusion-determination Download CX-003596: Categorical Exclusion Determination Bayou Choctaw Site Building Upgrades, Phases II and III CX(s) Applied: B1.3 Date: 08/24/2010 Location(s): Bayou Choctaw, Louisiana Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office http://energy.gov/nepa/downloads/cx-003596-categorical-exclusion-determination Download CX-002830: Categorical Exclusion Determination Repairs to Men?s Bathroom in West Hackberry Building 302

Note: This page contains sample records for the topic "repairs cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

401 - 24410 of 26,764 results. 401 - 24410 of 26,764 results. Download CX-009639: Categorical Exclusion Determination Characterization, Investigation, and Environmental Monitoring Activities CX(s) Applied: B3.1 Date: 11/19/2012 Location(s): Tennessee, California, California, Virginia Offices(s): Oak Ridge Office http://energy.gov/nepa/downloads/cx-009639-categorical-exclusion-determination Download CX-009615: Categorical Exclusion Determination Y646 (Y189), Renovation of E-Wing Ventilation, Building 773-A CX(s) Applied: B2.1 Date: 11/09/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-009615-categorical-exclusion-determination Download CX-009510: Categorical Exclusion Determination Strategic Petroleum Reserve Emergency Pipeline and Piping Repair, 2013-2017

482

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

11 - 8220 of 26,764 results. 11 - 8220 of 26,764 results. Download CX-000870: Categorical Exclusion Determination West Hackberry Air Conditioning/Heating Repairs CX(s) Applied: B1.3 Date: 02/05/2010 Location(s): West Hackberry, Louisiana Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office http://energy.gov/nepa/downloads/cx-000870-categorical-exclusion-determination Download CX-005895: Categorical Exclusion Determination Relocation of Bayou Choctaw Entry Portal Building CX(s) Applied: B1.3 Date: 05/05/2011 Location(s): Louisiana Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office http://energy.gov/nepa/downloads/cx-005895-categorical-exclusion-determination Download CX-005897: Categorical Exclusion Determination Bryan Mound Upgrade Wood to Steel Lighting Poles

483

Categorical Exclusion Determinations: Western Area Power  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Desert Southwest Region Desert Southwest Region Categorical Exclusion Determinations: Western Area Power Administration-Desert Southwest Region Categorical Exclusion Determinations issued by Western Area Power Administration-Desert Southwest Region. DOCUMENTS AVAILABLE FOR DOWNLOAD August 22, 2013 CX-010882: Categorical Exclusion Determination Liberty-Parker Dam #2 230-Kilovolt Transmission Line, Optical Power Ground Wire Repair CX(s) Applied: B4.7 Date: 08/22/2013 Location(s): Arizona Offices(s): Western Area Power Administration-Desert Southwest Region August 12, 2013 CX-010883: Categorical Exclusion Determination PHX-LOB and LIB-LOB 230-Kilovolt Double-Circuit- Replace Insulators at Structure No. 28-2 With NCI Type Polymers CX(s) Applied: B1.3 Date: 08/12/2013 Location(s): Arizona Offices(s): Western Area Power Administration-Desert Southwest Region

484

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

41 - 21650 of 26,764 results. 41 - 21650 of 26,764 results. Download CX-009217: Categorical Exclusion Determination Elmwood Dog Kennel Repair (Hurricane Isaac) CX(s) Applied: B1.3 Date: 09/24/2012 Location(s): CX: none Offices(s): Strategic Petroleum Reserve Field Office http://energy.gov/nepa/downloads/cx-009217-categorical-exclusion-determination Download CX-009218: Categorical Exclusion Determination Replace Sparge Piping at Bryan Mound Raw Water Intake Structure CX(s) Applied: B1.3 Date: 09/20/2012 Location(s): Texas Offices(s): Strategic Petroleum Reserve Field Office http://energy.gov/nepa/downloads/cx-009218-categorical-exclusion-determination Article Energy Department, Treasury Announce Availability of $150 Million in Tax Credits for Clean Energy Manufacturers The U.S. Departments of Energy and the Treasury announced the availability

485

Opportunities to Apply Phase Change Materials to Building Enclosures Webinar  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2011 1, 2011 Opportunities to Apply Phase Change Materials to Building Enclosures Welcome to the Webinar! We will start at 2:00 PM Eastern Time Be sure that you are also dialed into the telephone conference call: Dial-in number: 888-950-6757; Pass code: 6420234 1 | Building America Program www.buildingamerica.gov Building America: Introduction November 11, 2011 Chuck Booten Chuck.Booten@nrel.gov Building Technologies Program 2 | Building America Program www.buildingamerica.gov * Reduce energy use in new and existing residential buildings * Promote building science and systems engineering / integration approach * "Do no harm": Ensure safety, health and durability are maintained or improved

486

Applying a Model Transformation Taxonomy to Graph Transformation Technology  

E-Print Network (OSTI)

A taxonomy of model transformations was introduced in [16]. Among others, such a taxonomy can help developers in deciding which language, forma lism, tool or mechanism is best suited to carry out a particular model transformation activity. In this paper we apply the taxonomy to the technique of graph transformation, and we exemplify it by referring to four representative graph transformation tools. As a byproduct of our analysis, we discuss how well each of the considered tools carry out the activity of model transformation.

Tom Mens; Pieter Van Gorp; Dániel Varró; Gabor Karsai

2005-01-01T23:59:59.000Z

487

Towards Applying Reengineering Services to Energy-Efficient Applications  

E-Print Network (OSTI)

Abstract—Conserving resources and saving energy has become an important issue for information and communication technology. With increasing adoption of smartphones and tablet PCs, reducing energy consumption in mobile computing is of particular significance. User expectations towards their mobile devices are rising, and functionality is increasing. Accordingly, available energy is made a scarce resource. This paper discusses how software reengineering techniques, like dynamic analysis and refactoring, can be applied to the field of energy-aware computing, to monitor, analyze, and optimize the energy profile of mobile applications and devices.

Jan Jelschen Marion Gottschalk

2012-01-01T23:59:59.000Z

488

ENERGY STAR Industrial Plant Certification: Instructions for applying |  

NLE Websites -- All DOE Office Websites (Extended Search)

Industrial Plant Certification: Instructions for Industrial Plant Certification: Instructions for applying Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

489

Hazardous Gases VASILIS M. FTHENAKIS Department of Applied Science  

Office of Scientific and Technical Information (OSTI)

Mitigation Options for Mitigation Options for Accidental Releases of Hazardous Gases VASILIS M. FTHENAKIS Department of Applied Science Brookhaven National Laboratory Upton, N Y 11973 ABSTRACT The objective of this paper is to review and compare technologies available for mitigation of unconfined releases of toxic and flammable gases. These technologies indude: secondary confinement, de- inventory, vapor barriers, foam spraying, and water sprays/monitors. Guidelines for the design and/or operation of effective post-release mitigation systems and case studies involving actual industrial mitigation systems are also presented. 1. ACCIDENT PREVENTION & MITIGATION OPTIONS Accident prevention and mitigation in the process industries is based on the military concept of defense in

490

Applying pomdps to dialog systems in the troubleshooting domain  

E-Print Network (OSTI)

This paper reports on progress applying partially observable Markov decision processes (POMDPs) to a commercial dialog domain: troubleshooting. In the troubleshooting domain, a spoken dialog system helps a user to fix a product such as a failed DSL connection. Past work has argued that a POMDP is a principled approach to building spoken dialog systems in the simpler slot-filling domain; this paper explains how the POMDPs formulation can be extended to the more complex