Powered by Deep Web Technologies
Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

UCSC EMPLOYEE HOUSING APARTMENTS APPLICATION Rental rates include: rent, refuse collection, common area utilities, groundskeeping services, and repairs and  

E-Print Network (OSTI)

UCSC EMPLOYEE HOUSING APARTMENTS APPLICATION Rental rates include: rent, refuse collection, common. Tenants pay for their own utilities (i.e., electricity, gas, water, telephone and cable services). A $750 for current rental rates): 1 bedroom 1 bdrm deluxe 2 bdrm/1 bath 2 bdrm/2 bath) If you are interested in a two

California at Santa Cruz, University of

2

Single Family Residential Stormwater Management Guidelines  

E-Print Network (OSTI)

stormwater general permit (permit) implements the federal Clean Water Act. The permit is administered by the Washington State Department of Ecology and requires stormwater management for new development and redevelopment projects (including Single Family

Single Family Residential

2012-01-01T23:59:59.000Z

3

Enduring Rents  

E-Print Network (OSTI)

) = #12;[zV i t+1 (L) + (1 #0; z)V it+1(C)]; (2) where V it+1(C) is the continuation value starting from a state where a contest takes place. Next, suppose that st = M . We distinguish between the continuation value of the winner of the previous contest (w... ) and that of a contender who lost the previous contest (l). The value function for the winner is V wit (M) = #25; + #12; #2; pV wit+1(M) + (1 #0; p)[zV it+1 (L) + (1 #0; z)V it+1(C)] #3; : (3) The winner is successful in obtaining the rent in the current period...

Aidt, Toke S; Hillman, A

4

Updated October 2009 Vehicle Rentals Enterprise Rent-a-Car  

E-Print Network (OSTI)

employees, including subsidiaries for business and personal use. 4. An increased number of fuel efficient and alternate fuel cars are available in the Enterprise car fleet. 5. Vehicles rented for university business, Shaunavon, and Swift Current, an $8.00 per day surcharge will apply for all vehicles. Renting in Canada

Peak, Derek

5

Monitoring conservative retrofits in single family buildings  

SciTech Connect

This study has provided detailed before-and-after information on the ambient and comfort conditions in nine single family buildings, and on the energy consumption of those buildings, for one or more energy conservation retrofits. The data were recorded in such a manner that as well as being able to determine the savings from the retrofits and the influence these retrofits have on the comfort conditions of the residence, the effects of the retrofits on time-of-day usage are also determinable. The following are included in appendices: a table of participant's names, site addresses and retrofit; significant dates and appropriate comments; a day of data and an annotated data set; pre-retrofit and post-retrofit audit data sheets; and usage history.

Richardson, C.S.

1992-12-06T23:59:59.000Z

6

Peoples Gas – Single Family Direct Install (Illinois)  

Energy.gov (U.S. Department of Energy (DOE))

Owners of single-family homes, condos, townhomes and two-flats may be eligible for a free installation of new programmable thermostats, pipe insulation, showerheads, and faucet aerators through...

7

California Solar Initiative - Single-Family Affordable Solar...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

California Solar Initiative - Single-Family Affordable Solar Housing (SASH) Program California Solar Initiative - Single-Family Affordable Solar Housing (SASH) Program Eligibility...

8

Delivering Energy Efficiency to Middle Income Single Family Households  

NLE Websites -- All DOE Office Websites (Extended Search)

Delivering Energy Efficiency to Middle Income Single Family Households Delivering Energy Efficiency to Middle Income Single Family Households Title Delivering Energy Efficiency to Middle Income Single Family Households Publication Type Report Year of Publication 2011 Authors Zimring, Mark, Merrian Borgeson, Ian M. Hoffman, Charles A. Goldman, Elizabeth Stuart, Annika Todd, and Megan A. Billingsley Pagination 102 Date Published 12/2011 Publisher LBNL City Berkeley Keywords electricity markets and policy group, energy analysis and environmental impacts department Abstract The question posed in this report is: How can programs motivate these middle income single family households to seek out more comprehensive energy upgrades, and empower them to do so? Research methods included interviews with more than 35 program administrators, policy makers, researchers, and other experts; case studies of programs, based on interviews with staff and a review of program materials and data; and analysis of relevant data sources and existing research on demographics, the financial status of Americans, and the characteristics of middle income American households. While there is no 'silver bullet' to help these households overcome the range of barriers they face, this report describes outreach strategies, innovative program designs, and financing tools that show promise in increasing the attractiveness and accessibility of energy efficiency for this group. These strategies and tools should be seen as models that are currently being honed to build our knowledge and capacity to deliver energy improvements to middle income households. However, the strategies described in this report are probably not sufficient, in the absence of robust policy frameworks, to deliver these improvements at scale. Instead, these strategies must be paired with enabling and complementary policies to reach their full potential.

9

Enterprise Rent-a-Car | Staff Services  

NLE Websites -- All DOE Office Websites (Extended Search)

Enterprise Rent-a-Car Enterprise Rent-a-Car Please note: Partial day rates only apply to rentals that are being returned to BNL. They do not apply to one way rentals. There is also a $25 fee for one way rentals going to JFK/LaGuardia/Newark airports. FX0019 Official Brookhaven Business Rates include unlimited free mileage 24 Hour Daily Weekly Monthly Economy $47.00 $282.00 $1040.00 Compact $49.00 $294.00 $1078.00 Midsize $51.00 $306.00 $1126.00 Full-size $52.00 $312.00 $1144.00 Mini Vans $81.00 $486.00 $1760.00 4 x 4 $81.00 $486.00 $1760.00 Partial Day Rates Hours are 11 a.m. - 4 p.m. or 4 p.m. - 9 p.m. Compact - $35.00 Midsize - $40.00 Full-size - $45.00 FX0020 - Leisure Rates Unlimited free miles are restricted to the following destinations: New York, New Jersey, Connecticut, Delaware, Maryland, District of Columbia.

10

Table HC7-6a. Home Office Equipment by Type of Rented Housing Unit,  

U.S. Energy Information Administration (EIA) Indexed Site

6a. Home Office Equipment by Type of Rented Housing Unit, 6a. Home Office Equipment by Type of Rented Housing Unit, Million U.S. Households, 2001 Home Office Equipment RSE Column Factor: Total Rented Units Type of Rented Housing Unit RSE Row Factors Single-Family Apartments in Buildings With Mobile Home Two to Four Units Five or More Units 0.5 0.8 1.0 0.9 3.0 Total ............................................... 34.3 10.5 7.4 15.2 1.1 6.9 Households Using Office Equipment .......................... 28.7 9.2 6.5 12.1 0.9 7.5 Personal Computers 1 ................... 14.3 5.3 2.9 5.9 0.3 10.7 Number of Desktop PCs 1 .................................................. 11.0 4.0 2.4 4.4 0.3 11.4 2 or more .................................... 1.7 0.7 0.2 0.7 Q 30.8 Number of Laptop PCs 1 ..................................................

11

Monitoring conservative retrofits in single family buildings. Final technical report  

SciTech Connect

This study has provided detailed before-and-after information on the ambient and comfort conditions in nine single family buildings, and on the energy consumption of those buildings, for one or more energy conservation retrofits. The data were recorded in such a manner that as well as being able to determine the savings from the retrofits and the influence these retrofits have on the comfort conditions of the residence, the effects of the retrofits on time-of-day usage are also determinable. The following are included in appendices: a table of participant`s names, site addresses and retrofit; significant dates and appropriate comments; a day of data and an annotated data set; pre-retrofit and post-retrofit audit data sheets; and usage history.

Richardson, C.S.

1992-12-06T23:59:59.000Z

12

North Shore Gas – Single Family Direct Install (Illinois)  

Energy.gov (U.S. Department of Energy (DOE))

Owners of single-family homes, condos, townhomes and two-flats may be eligible for a free installation of new programmable thermostats, pipe insulation, showerheads, and faucet aerators through...

13

Forecasting Resource Supply from Scarcity Rent Data  

NLE Websites -- All DOE Office Websites (Extended Search)

Forecasting Resource Supply from Scarcity Rent Data Speaker(s): Larry Dale Date: December 18, 2000 - 12:00pm Location: 90-3122 Seminar HostPoint of Contact: Diana Morris This talk...

14

PERSPECTIVE---Explaining Influence Rents: The Case for an Institutions-Based View of Strategy  

Science Conference Proceedings (OSTI)

Research in strategy has identified and tried to explain four types of rents: monopolistic rents, efficiency rents, quasi rents, and Schumpeterian rents. Building on previous work on political and institutional strategies, we add a fifth type of rent: ... Keywords: generic strategies, influence rents, institutions

Gautam Ahuja; Sai Yayavaram

2011-11-01T23:59:59.000Z

15

California Solar Initiative - Single-Family Affordable Solar Housing (SASH)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

California Solar Initiative - Single-Family Affordable Solar California Solar Initiative - Single-Family Affordable Solar Housing (SASH) Program California Solar Initiative - Single-Family Affordable Solar Housing (SASH) Program < Back Eligibility Low-Income Residential Savings Category Solar Buying & Making Electricity Maximum Rebate 10,000 for fully subsidized systems No maximum stated for partially subsidized systems Program Info Start Date 7/1/2009 Expiration Date 12/31/2015 State California Program Type State Rebate Program Rebate Amount Varies depending on participant's income level and California Alternate Rates for Energy (CARE) program eligibility. (see below) Provider GRID Alternatives The California Solar Initiative (CSI) provides financial incentives for installing solar technologies through a variety of smaller sub-programs. Of

16

Office rent and labor availability in the Chicago Metropolitan Area  

E-Print Network (OSTI)

This paper provides an empirical analysis of office rents using data from the 2000 U.S. Census and TWR office building data in the Chicago Metropolitan Statistical Area. The results indicate that rent levels respond to ...

Tang, Wencan, M.C.P. Massachusetts Institute of Technology

2008-01-01T23:59:59.000Z

17

Solar energy heating system design package for a single-family residence at New Castle, Pennsylvania  

DOE Green Energy (OSTI)

The design of a solar heating and hot water system for the New Castle Redevelopment Authority's single-family dwelling located at New Castle, Pennsylvania is described. Documentation submitted by the contractor for Government review of plans, specifications, cost trade studies and verification status for approval to commit the system to fabrication is presented. Also included are system integration drawings, major subsystems drawings, and architect's specifications and plans.

Not Available

1977-08-01T23:59:59.000Z

18

Recommendations for 15% Above-Code Energy Efficiency Measures for Single-Family Residences  

E-Print Network (OSTI)

This paper presents an overview of the recommendations for achieving 15% above-code energy performance for single-family residences. The analysis was performed using a simulation model of an International Energy Conservation Code (IECC)- compliant, single family residence in Houston, Texas. To accomplish the 15% annual energy use reductions, twelve measures were considered, which include: tankless water heater, solar domestic hot water system, gas water heater without the standing pilot light, ducts in the conditioned space, improved duct sealing, increased air tightness, window shading and redistribution, improved window performance, improved heating and cooling system efficiency. After the total annual energy use was determined for each measure, they were then grouped to accomplish a 15% total annual energy use reduction.

Culp, C.; Haberl, J. S.; Mukhopadhyay, J.; Liu, J. B.; Yazdani, B.; Malhotra, M.

2007-12-01T23:59:59.000Z

19

The Home Energy Scoring Tool: A Simplified Asset Rating for Single Family  

NLE Websites -- All DOE Office Websites (Extended Search)

The Home Energy Scoring Tool: A Simplified Asset Rating for Single Family The Home Energy Scoring Tool: A Simplified Asset Rating for Single Family Homes Title The Home Energy Scoring Tool: A Simplified Asset Rating for Single Family Homes Publication Type Conference Proceedings LBNL Report Number LBNL-5714E Year of Publication 2012 Authors Bourassa, Norman, Leo I. Rainer, Evan Mills, and Joan Glickman Conference Name 2012 ACEEE Summer Study on Energy Efficiency in Buildings Date Published 05/2012 Conference Location Pacific Grove, CA, USA Abstract In 2010, the U.S. Department of Energy (DOE) and Lawrence Berkeley National Laboratory (LBNL) initiated development of a new web-based computer tool and method for providing an energy asset rating of single-family homes. The resulting Home Energy Scoring Tool (http://homeenergyscore.lbl.gov) is a key component of the DOE's Home Energy Score Program (http://www.homeenergyscore.gov) for residential building energy labeling, a voluntary national asset rating method that uses a simplified and standardized energy assessment process. The Scoring Tool component of the program has been designed to support the existing energy analysis marketplace by providing a substantially lower-cost entry-level assessment method. This paper presents technical details of the Home Energy Scoring Tool itself, including the Scoring Tool's relationship to the Home Energy Saver building simulation engine, the Home Energy Score calculation methodology, and the web services feature that allows any qualified third-party software developer to integrate the Home Energy Score method into their own webbased applications and market delivery strategy.

20

Measured energy savings and economics of retrofitting existing single- family homes: An update of the BECA-B database  

SciTech Connect

These appendices are the companion volume to report number LBL--28147 Vol.1, with the same title. The summary data tables include physical characteristics, energy consumption, savings, and the retrofit measures installed and their costs for each retrofit project. Each existing single family residential building'' retrofit project in the BECA-B database is described. 99 refs. (BM)

Cohen, S.D.; Goldman, C.A.; Harris, J.P.

1991-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Solar heating system design package for a single-family residence at William O'Brien State Park, Minnesota  

DOE Green Energy (OSTI)

Honeywell, Inc. has undertaken the design, fabrication, installation, and monitoring of a prototype solar heating and hot water system for the Minnesota Department of Natural Resources' single-family dwelling located at O'Brien State Park, 30 miles east of Minneapolis, Minnesota. Documentation submitted by Honeywell for government review of plans, specifications, cost trade studies and verification status in order to provide the contractor with approval to commit the system to fabrication are included.

Not Available

1977-07-01T23:59:59.000Z

22

2001 Electronic Materials Conference: Hertz Rent-a-Car - TMS  

Science Conference Proceedings (OSTI)

Hertz Rent-a-Car System has been selected as the Official Car Rental Company for ... one week after the actual meeting dates and are subject to car availability.

23

An analysis of International Energy Conservation Code (IECC)-compliant single-family residential energy use  

E-Print Network (OSTI)

In 2001, the Texas State Senate passed Senate Bill 5 to reduce ozone levels by encouraging the reduction of emissions of NOx that were not regulated by the Texas Natural Resource Conservation Commission, including point sources (power plants), area sources (such as residential emissions), road mobile sources, and non-road mobile sources. For the building energy section, the Texas State Legislature adopted the 2000/2001 International Energy Conservation Code, as modified by the 2001 Supplement, as the state's building energy code. The 2000/2001 IECC is a comprehensive energy conservation code that establishes a standard for the insulation levels, glazing and cooling and heating system efficiencies through the use of prescriptive and performance-based provisions. Therefore, the purpose of this research is to improve the accuracy of a 2000/2001 IECCcompliant performance simulation using the DOE-2.1e simulation program to investigate the energy performance of a typical single-family house. To achieve this purpose, several objectives had to be accomplished, including: 1) the development of an IECC-compliant simulation model, 2) the development and testing of specific improvements to the existing code-traceable model, 3) the calibration and installation of sensors in a case-study house, 4) the validation of the improved simulation model with measured data from the case-study house, and 5) use the validated model to simulate the energy-conserving features of single-family residences that cannot be simulated with existing versions of the DOE-2.1e program. In order to create the code-traceable IECC-compliant simulation model, a base-case house simulation was created and the results calibrated with measured energy and environmental data from the case-study house. This was done in order to obtain an improved simulation model that would more accurately represent the case-study building. The calibrated model was then used to verify the accuracy of the improved simulation methods against previous models and measured data. After validation of the new simulation methodologies, the IECC simulation model was used to simulate different energy-conserving features for a single-family residence that could not be simulated with the previous version of the DOE-2 input file. Finally, areas for future work were identified in an effort to continue to improve the model.

Kim, Seongchan

2006-08-01T23:59:59.000Z

24

Installation guidelines for Solar Heating System, single-family residence at New Castle, Pennsylvania  

DOE Green Energy (OSTI)

The Solar Heating System installer guidelines are provided for each subsystem and includes testing and filling the system. This single-family residential heating system is a solar-assisted, hydronic-to-warm-air system with solar-assisted domestic water heating. It is composed of the following major components: liquid cooled flat plate collectors; water storage tank; passive solar-fired domestic water preheater; electric hot water heater; heat pump with electric backup; solar hot water coil unit; tube-and-shell heat exchanger, three pumps, and associated pipes and valving in an energy transport module; control system; and air-cooled heat purge unit. Information is also provided on the operating procedures, controls, caution requirements, and routine and schedule maintenance. Information consists of written procedures, schematics, detail drawings, pictures and manufacturer's component data.

Not Available

1980-01-01T23:59:59.000Z

25

Passive heating and cooling strategies for single family housing in Fresno, California: a case study  

E-Print Network (OSTI)

This study focuses on the integration of passive heating, cooling, and ventilating techniques for detached single family housing in Fresno, California. The energy use and patterns of energy use were simulated for a typical tract house in Fresno, and serves as a case study, to which energy saving strategies were applied and evaluated using Ener-Win software. The effectiveness of each strategy was assessed based on the annual savings, the initial cost, and a life-cycle cost analysis. Specific areas of evaluation include: shading, improving the R-value and infiltration rate of the building envelope, thermal mass, natural ventilation, and evaporative cooling. The optimum strategies selected utilize only traditional building techniques. Evaporative cooling used in conjunction with an air conditioner was the most effective energy reducing strategy, but a combination of purely passive strategies yield competitive results. Although the typical Fresno home is already energy efficient, small alterations provide energy savings up to 75% for space conditioning.

Winchester, Nathan James

1995-01-01T23:59:59.000Z

26

A comparative study of condominium and single family house price appreciation in the Salt Lake Valley  

E-Print Network (OSTI)

This study examines whether the form of ownership affects the appreciation rate of housing units. The specific test conducted is whether condominiums and single family homes in the Salt Lake Valley have appreciated at the ...

Billings, John D. (John David), 1971-

2003-01-01T23:59:59.000Z

27

The impact of multifamily development on single family home prices in the Greater Boston Area  

E-Print Network (OSTI)

The impact of large, multifamily developments on nearby single-family home prices was tested in five towns in the Greater Boston Area. Case studies that had recent multifamily developments built near transit nodes or town ...

Schuur, Arah (Arah Louise Adele)

2005-01-01T23:59:59.000Z

28

A sub-systems approach to small lot single-family housing  

E-Print Network (OSTI)

The trends and preferences explored in this work indicate that the "American Dream" of a single-family detached house is still the preferred housing model. In-order to achieve this goal most home buyers will have to accept ...

Kühn, Heinrich, 1951-

1988-01-01T23:59:59.000Z

29

Analysis of advanced conceptual designs for single-family-size absorption chillers  

DOE Green Energy (OSTI)

The objective of this research study is the development of radically new fluid systems, specifically tailored to the needs and requirements of solar-absorption cooling for single-family-size residences. Progress is reported.

Macriss, R.A.; Zawacki, T.S.; Kouo, M.T.; Sneed, D.M.

1978-01-01T23:59:59.000Z

30

Critical Question #7: What are the Best Practices for Single-Family  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7: What are the Best Practices for Single-Family 7: What are the Best Practices for Single-Family Ventilation in All Climate Regions? Critical Question #7: What are the Best Practices for Single-Family Ventilation in All Climate Regions? Why ventilate? What are the ultimate goals of ventilation requirements in codes and standards? What are the characteristics of an effective ventilation system in new vs. existing construction? What are the risks and solutions associated with ventilation in hot-humid climates? cq7_kitchen_ventilation_singer.pdf cq7_ventilation_lab_houses_rudd.pdf cq7_ventilation_hothumid_parker.pdf More Documents & Publications Track B - Critical Guidance for Peak Performance Homes Track C - Market-Driven Research Solutions Critical Question #8: When are Heat Pump Water Heaters the Best Solution?

31

Analysis of photovoltaic total energy systems for single family residential applications  

DOE Green Energy (OSTI)

The performance and cost-effectiveness of three photovoltaic total energy system concepts designed to meet the thermal and electrical demands of a typical single family house are compared. The three photovoltaic total energy system concepts considered are: (1) All-photovoltaic systems. Passively air-cooled photovoltaic panels provide electricity to meet both electrical and thermal demands. (2) Separate-panel systems. Solar thermal panels provide thermal energy, while passively air-cooled photovoltaic panels serve the purely electric demand. (3) Combined thermal/electric panel systems. Water-cooled photovoltaic panels provide both thermal energy (transported by cooling water) and electrical energy to meet the separate thermal and electrical demands. Additional passively air-cooled photovoltaic panels are added, as required, to meet the electrical demand. The thermal demand is assumed to consist of the energy required for domestic hot water and space heating, while the electrical demand includes the energy required for baseload power (lights, appliances, etc.) plus air conditioning. An analysis procedure has been developed that permits definition of the panel area, electrical and/or thermal storage capacity, and utility backup energy level that, in combination, provide the lowest annual energy cost to the homeowner for each system concept for specified assumptions about costs and system operations. The procedure appears capable of being used to approximately any size system using solar collectors, as well as in any application where the thermal and/or electrical demand is being provided by solar energy, with utility or other conventional backup. This procedure has been used to provide results for homes located in Phoenix, Arizona, and Madison, Wisconsin, and to evaluate the effects of array and backup power costs and the desirability of selling excess electrical energy back to the utility. (WHK)

Chobotov, V.; Siegel, B.

1978-08-01T23:59:59.000Z

32

59th Annual Device Research Conference: Hertz Rent-a-Car  

Science Conference Proceedings (OSTI)

TMS Logo. 59th Annual Device Research Conference: Hertz Rent-a-Car. 59th ANNUAL DEVICE RESEARCH CONFERENCE June 25–27, 2001 · University of  ...

33

The Curious Institution of Mobile Home Rent Control: An Analysis of Mobile Home Parks in California  

E-Print Network (OSTI)

institution of mobile home , J. Housing Econ. (2007),into e?ects of mobile home park rent control. Journal ofinstitution of mobile home , J. Housing Econ. (2007),

Mason, Carl; Quigley, John M.

2007-01-01T23:59:59.000Z

34

Assessment of National Benefits from Retrofitting Existing Single-Family Homes with Ground Source Heat Pump Systems  

Science Conference Proceedings (OSTI)

This report assesses the potential national benefits of retrofitting U.S. single-family homes with state-of-the-art GSHP systems at various penetration rates. The benefits considered include energy savings, reduced summer electrical peak demand, consumer utility bill savings, and reduced carbon dioxide (CO2) emissions. The assessment relies heavily on energy consumption and other data obtained from the Residential Energy Consumption Survey conducted by the U.S. Department of Energy s Energy Information Administration. It also considers relative differences in energy consumption between a state-of-the-art GSHP system and existing residential space-heating, space-cooling, and water-heating (SH SC WH) systems, which were determined with a well-established energy analysis program for residential SH SC WH systems. The impacts of various climate and geological conditions, as well as the efficiency and market share of existing residential SH SC WH systems, have been taken into account in the assessment.

Liu, Xiaobing [ORNL

2011-01-01T23:59:59.000Z

35

Statewide Electricity and Demand Capacity Savings from the Implementation of IECC Code in Texas: Analysis for Single-Family Residences  

E-Print Network (OSTI)

This paper presents estimates of the statewide electricity and electric demand savings achieved from the adoption of the International Energy Conservation Code (IECC) for single-family residences in Texas and includes the corresponding increase in construction costs over the eight-year period from 2002 through 2009. Using the Energy Systems Laboratory's International Code Compliance Calculator (IC3) simulation tool, the annual statewide electricity savings in 2009 are estimated to be $161 million. The statewide peak electric demand reductions in 2009 are estimated to be 694 MW for the summer and 766 MW for the winter periods. Since 2002, the cumulative statewide electricity and electric demand savings over the eight year period from 2002 to 2009 are $1,803 million ($776 million from electricity savings and $1,027 million from electric demand savings) while the total increased costs are estimated to be $670 million.

Kim, H.; Baltazar, J.C.; Haberl, J.

2011-01-01T23:59:59.000Z

36

Solar Energy System Performance Evaluation: May-August 1978. Florida Gas Company, Single Family Residence, Winter Springs, Florida  

DOE Green Energy (OSTI)

A brief description of the system, which provides thermal energy for space heating, space cooling and domestic hot water heating for a one story single family dwelling, is given. A performance evaluation of the cooling subsystem is presented for the period May through August, 1978. A comparison of measured climatic data with long term average conditions for the vicinity is made. Subsystem performance, including collector array, storage, and space cooling systems, is discussed and design modifications that would improve the system's overall economic performance are considered. Space cooling is provided by an Arkla Model WF-35, 3-ton absorption cycle chiller. A comparison of the present system configuration with a vapor compression air conditioner is presented showing that net savings are realized when the present system is operated solely with solar supplied energy.

Lee, T.D.; McCumber, W.H.; Murphy, L.J.

1978-01-01T23:59:59.000Z

37

The earth-coupled heat pump: Utilizing innovative technology in single family rehabilitation strategies  

DOE Green Energy (OSTI)

The study examines the feasibility of incorporating the use of earth-coupled heat pump technology in single-family housing rehabilitation projects, based on energy conservation attributes and financial considerations. Following evaluation of a theoretical model which indicated that installations of the heat pumps were feasible, the heat pumps were tested under actual conditions in five single family housing units which were part of the Urban Homesteading Program, and were matched with comparable units which did not receive special treatment. Energy consumption information was collected for all units for twelve months. Variables were identified, and the data was analyzed for individual housing units and compared with the results predicted by the theoretical model to determine the practicality of incorporating such technology in large scale rehabilitation projects. 14 refs., 14 figs., 3 tabs.

Not Available

1989-11-01T23:59:59.000Z

38

Standard Work Specifications for Single-Family Home Energy Upgrades Summary (Fact Sheet)  

SciTech Connect

The U.S. Department of Energy (DOE), the National Renewable Energy Laboratory (NREL) and numerous industry stakeholders developed the Standard Work Specifications for Single-Family Home Energy Upgrades to define the minimum requirements for high-quality residential energy upgrades. Today, the Standard Work Specifications provide a unique source for defining high-quality home energy upgrades, establishing clear expectations for homeowners, contractors, trainers, workers, program administrators, and organizations that provide financing for energy upgrades.

Not Available

2012-11-01T23:59:59.000Z

39

Identifying Inefficient Single-Family Homes With Utility Bill Analysis: Preprint  

Science Conference Proceedings (OSTI)

Differentiating between energy-efficient and inefficient single-family homes on a community scale helps identify and prioritize candidates for energy-efficiency upgrades. Prescreening diagnostic procedures can further retrofit efforts by providing efficiency information before a site-visit is conducted. We applied the prescreening diagnostic to a simulated community of homes in Boulder, Colorado and analyzed energy consumption data to identify energy-inefficient homes.

Casey, S.; Krarti, M.; Bianchi, M.; Roberts, D.

2010-08-01T23:59:59.000Z

40

Hot Water Draw Patterns in Single-Family Houses: Findings from Field  

NLE Websites -- All DOE Office Websites (Extended Search)

Hot Water Draw Patterns in Single-Family Houses: Findings from Field Hot Water Draw Patterns in Single-Family Houses: Findings from Field Studies Title Hot Water Draw Patterns in Single-Family Houses: Findings from Field Studies Publication Type Report LBNL Report Number LBNL-4830E Year of Publication 2011 Authors Lutz, James D., Renaldi, Alexander B. Lekov, Yining Qin, and Moya Melody Document Number LBNL-4830E Pagination 26 Date Published 05/2011 Publisher Lawrence Berkeley National Laboratory City Berkeley Abstract This report describes data regarding hot water draw patterns that Lawrence Berkeley National Laboratory obtained from 10 studies. The report describes our purposes in collecting the data; the ways in which we managed, cleaned, and analyzed the data; and the results of our data analysis. We found that daily hot water use is highly variable both among residences and within the same residence. We also found that the distributions of daily hot water use are not symmetrical normal distributions. Thus we used median, not average, values to characterize typical daily hot water use. This report presents summary information that illustrates the results of our data collection and some initial analysis.

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Property:Building/FloorAreaUnheatedRentedPremises | Open Energy Information  

Open Energy Info (EERE)

FloorAreaUnheatedRentedPremises FloorAreaUnheatedRentedPremises Jump to: navigation, search This is a property of type Number. Floor area for Unheated but rented-out premises (garages) < 10 °C Pages using the property "Building/FloorAreaUnheatedRentedPremises" Showing 6 pages using this property. S Sweden Building 05K0021 + 700 + Sweden Building 05K0050 + 760 + Sweden Building 05K0058 + 1,200 + Sweden Building 05K0080 + 2,000 + Sweden Building 05K0081 + 700 + Sweden Building 05K0102 + 234 + Retrieved from "http://en.openei.org/w/index.php?title=Property:Building/FloorAreaUnheatedRentedPremises&oldid=285964#SMWResults" What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load) Error 429 Throttled (bot load)

42

Incremental densification auctions : A politically viable method of producing infill housing in existing single-family neighborhoods  

E-Print Network (OSTI)

This paper examines the problem of convincing homeowners to accept new housing density in their neighborhoods. This paper proposes that densification that places additional housing units in preexisting single-family ...

Baker, Karl Phillip

2008-01-01T23:59:59.000Z

43

Economics of Condensing Gas Furnaces and Water Heaters Potential in Residential Single Family Homes  

SciTech Connect

Residential space and water heating accounts for over 90percent of total residential primary gas consumption in the United States. Condensing space and water heating equipment are 10-30percent more energy-efficient than conventional space and water heating. Currently, condensing gas furnaces represent 40 percent of shipments and are common in the Northern U.S. market. Meanwhile, manufacturers are planning to develop condensing gas storage water heaters to qualify for Energy Star? certification. Consumers, installers, and builders who make decisions about installing space and water heating equipment generally do not perform an analysis to assess the economic impacts of different combinations and efficiencies of space and water heating equipment. Thus, equipment is often installed without taking into consideration the potential life-cycle economic and energy savings of installing space and water heating equipment combinations. Drawing on previous and current analysis conducted for the United States Department of Energy rulemaking on amended standards for furnaces and water heaters, this paper evaluates the extent to which condensing equipment can provide life-cycle cost-effectiveness in a representative sample of single family American homes. The economic analyses indicate that significant energy savings and consumer benefits may result from large-scale introduction of condensing water heaters combined with condensing furnaces in U.S. residential single-family housing, particularly in the Northern region. The analyses also shows that important benefits may be overlooked when policy analysts evaluate the impact of space and water heating equipment separately.

Lekov, Alex; Franco, Victor; Meyers, Steve

2010-05-14T23:59:59.000Z

44

Estimates of Energy Cost Savings Achieved from 2009 IECC Code-Compliant, Single Family Residences in Texas  

E-Print Network (OSTI)

This report presents estimates of the energy cost savings to be achieved from 2009 International Energy Conservation Code (IECC) code-compliant, single-family residences in Texas compared to the pre-2009 IECC codes, including: the 2001 IECC, the 2006 IECC, and the 2006 IECC w/ Houston amendments (w/ HA). A series of simulations were performed using an ESL simulation model (BDL version 4.01.07 of IC3) based on the DOE-2.1e simulation and the appropriate TMY2 weather files for three counties representing three 2009 IECC Climate Zones across Texas: Harris County for Climate Zone 2, Tarrant County for Climate Zone 3, and Potter County for Climate Zone 4. Two options based on the choice of heating fuel type were considered: (a) an electric/gas house (gas-fired furnace for space heating, and gas water heater for domestic water heating), and (b) a heat pump house (heat pump for space heating, and electric water heater for domestic water heating). The base-case building was assumed to be a 2,325 sq. ft., square-shape, one story, single-family, detached house with a floor-to-ceiling height of 8 feet. The house has an attic with a roof pitched at 23 degrees. The base-case building envelope and system characteristics were determined from the general characteristics and the climate-specific characteristics as specified in the 2001 IECC, the 2006 IECC, the 2006 IECC w/HA, and the 2009 IECC. In addition, to facilitate a better comparison with the 2009 code, several modifications were applied to the pre-2009 IECC codes. As a result, the estimated annual energy cost savings per house associated with the 2009 IECC compared to the 2001 and 2006 IECC are: (a) an electric/gas house: $462/year and $206/year for Harris County, $432/year and $216/year for Tarrant County, and $576/year and $153/year for Potter County and (b) a heat pump house: $490/year and $203/year for Harris County, $487/year and $226/year for Tarrant County, and $680/year and $155/year for Potter County. The corresponding % savings of total energy cost of a 2009 IECC code-compliant house are: (a) an electric/gas house: 22.7% and 10.1% for Harris County, 21.8% and 10.9% for Tarrant County, and 28.9% and 7.7% for Potter County and (b) a heat pump house: 21.6% and 8.9% for Harris County, 20.9% and 9.7% for Tarrant County, and 25.7% and 5.8% for Potter County.

Kim, H.; Baltazar, J. C.; Haberl, J.

2011-01-01T23:59:59.000Z

45

Why Do Companies Rent Green? Real Property and Corporate Social Responsibility  

E-Print Network (OSTI)

P. & Roth, K. 2000. Why Companies Go Green: A Model ofThe Effect of Stated Company Intent on Consumer Skepticism.and Economics 024 Why Do Companies Rent Green? Real Property

Eichholtz, Piet; Kok, Nils; Quigley, John M.

2009-01-01T23:59:59.000Z

46

Why Do Companies Rent Green? Real Property and Corporate Social Responsibility  

E-Print Network (OSTI)

Bansal P, Roth K. 2000. Why Companies Go Green: A Model ofunder the title ‘Why Companies Rent Green: CSR and the Rolemining and construction companies, as well as the government

Eichholtz, Piet; Kok, Nils; Quigley, John M.

2010-01-01T23:59:59.000Z

47

Selected cost considerations for geothermal district heating in existing single-family residential areas  

DOE Green Energy (OSTI)

In the past, district heating (geothermal or conventionally fueled) has not been widely applied to the single-family residential sector. Low-heat load density is the commonly cited reason for this. Although it`s true that load density in these areas is much lower than for downtown business districts, other frequently overlooked factors may compensate for load density. In particular, costs for distribution system installation can be substantially lower in some residential areas due to a variety of factors. This reduced development cost may partially compensate for the reduced revenue resulting from low-load density. This report examines cost associated with the overall design of the system (direct or indirect system design), distribution piping installation, and customer branch lines. It concludes with a comparison of the costs for system development and the revenue from an example residential area.

Rafferty, K.

1996-06-01T23:59:59.000Z

48

Measured energy savings and economics of retrofitting existing single-family homes: An update of the BECA-B database  

SciTech Connect

The energy bill for US single-family households was over $77 billion in 1987 (excluding auto fuel purchases), accounting for approximately 20% of national energy expenditures. Large sums are spent on residential retrofits by individual homeowners, government agencies, and utilities. As of late 1987, over 21 million households indicated that they had added at least one energy-saving measure in the previous two years, while a recent Electric Power Research Institute (EPRI) study estimated that nearly 15 million residential customers have participated in some kind of demand-side management (DSM) program. Given the level of continuing investments in residential energy efficiency, accurate estimates of savings from various conservation measures are increasingly necessary, especially as new technologies become more sophisticated and incremental efficiency gains more difficult to achieve. This report provides a comparative analysis of measured data on the performance and cost-effectiveness of energy-saving measures in existing single-family homes, based on information in the Buildings Energy-Use Compilation and Analysis (BECA) data base. The initial BECA report on measured data for single-family retrofits was completed seven years ago. In updating the single-family database, we have added 135 data points, representing over 33,000 houses, to the original database of 145 retrofit projects. The report is organized in two volumes. Volume 1 provides a summary of energy savings and costs of individual retrofit measures and strategies and results from federal/state low-income and utility weatherization programs. we also discuss measurement issues, predicted versus actual savings, trends in single-family retrofit programs, and implications for the next generation'' of cost-effective single-family retrofits. Volume 2 contains a written summary of each retrofit project and complete data tables. 87 refs., 20 figs., 16 tabs.

Cohen, S.D.; Goldman, C.A.; Harris, J.P.

1991-02-01T23:59:59.000Z

49

Energy Savings Resulting from Shading Devices on Single-Family Residences in Austin, Texas  

E-Print Network (OSTI)

Potential annual energy savings resulting from window shading devices on three prototypical Austin, Texas, single-family residences were computed in this study. Savings were calculated for interior (shades, blinds, draperies, window film, and tinted windows) and exterior (solar screens, awnings, overhangs, and the effects of recessed windows and vegetation) shading devices. The analysis was conducted with the DOE-2 building energy analysis computer program. Nominal baseline cases (single glazing, gas heating, and nominal shading from eaves and neighboring buildings) were run for each prototype. Selected baseline variants (double glazing, all electric, and no eaves or neighbor shading) were run to test parameter sensitivity. Results are reported in terms of the annual heating and cooling energy use and energy cost, with each device in place, as compared to the baseline cases. The devices are ranked in term of energy savings and energy coat savings. Another significant result is the multiple-regression correlation of annual heating and cooling energy savings with Shading Coefficient and U-value that generalizes the performance of the shading devices.

Pletzer, R. K.; Jones, J. W.; Hunn, B. D.

1987-01-01T23:59:59.000Z

50

Solar project description for Florida gas company's single family residence, Winter Springs, Florida  

DOE Green Energy (OSTI)

The Florida Gas Company solar energy system is installed in a 1548 square-foot, three bedroom single family dwelling located in Winter Springs, Florida. The system is designed to provide solar energy for space heating, space cooling, and domestic hot water heating. Solar energy is collected by two banks of double glazed flat plate collectors with a gross area of 714 square feet. Solar energy is transferred from the collector array to a 1350 gallon underground storage tank. Water is used as the heat collection, transfer and storage medium. Freeze protection is provided by means of circulation of hot water from storage through the collectors. No anti-freeze additive is required. A 3-ton solar energy powered absorption cycle Water Chiller provides chilled water for circulation through the same air distribution system. A gas fired boiler provides supplemental thermal energy to the chiller when sufficient thermal energy is not available from storage. Original cost estimates for provisioning and installation of the Solar System are given.

Not Available

1979-06-22T23:59:59.000Z

51

Energy measurements of attic radiant barriers installed in single-family houses  

Science Conference Proceedings (OSTI)

Testing was conducted by the Oak Ridge National Laboratory to determine the energy savings attributable to radiant barriers installed in attics of unoccupied single-family houses. Three levels of fiberglass attic insulation (R-11 ,R-19, and R-30) were tested with two types of barrier installation (horizontal and truss). The results showed that horizontally installed radiant barriers were more effective than truss barriers in reducing heating and cooling loads. Measured cooling load reductions ranged form 0 to 22% (compared to same attic insulation insulation R-value with no radiant barrier) and heating load changes from /plus/4% to /minus/10% were measured (compared to same attic insulation R-value with no radiant barrier). Radiant barriers appeared to decrease the heating and cooling loads more when lesser amounts of insulation (R-11 and R-19) were present in an attic. Minimal changes were measured when R-30 was present in an attic. Long-term effects of dust on the performance of radiant barriers as well as the effects of moisture condensing on the surface of a radiant barrier during cold winter temperatures remain unanswered.

Levins, W.P.; Karnitz, M.A.

1988-07-01T23:59:59.000Z

52

Cooling-energy measurements of unoccupied single-family houses with attics containing radiant barriers  

Science Conference Proceedings (OSTI)

Tests were conducted by Oak Ridge National Laboratory (ORNL) to determine the magnitude of the energy savings brought about by installing radiant barriers in the attics of single-family houses. The radiant barrier used for this test is a product with two reflective aluminum surfaces on a kraft paper base. The purpose of the radiant barrier is to reduce the radiant heat transfer component impinging on the fiberglass attic insulation. The radiant barrier works as a system in conjunction with an air space and can theoretically block up to 95% of far-infrared radiation heat transfer. The experiment was conducted in three unoccupied research houses that are operated by ORNL. Two variations on the installation of radiant barriers were studied. One house was used as the control house (no barrier was installed), while the other two were used to test the two different methods for installing the radiant barriers. In one house the barrier was laid on top of the attic fiberglass batt insulation, and in the other house, the barrier was attached to the underside of the roof trusses. The attics of all three houses were insulated with kraft-paper-faced R-19 fiberglass batt insulation. The results showed a savings in the cooling loads of 21% when the radiant barrier was laid on top of the attic fiberglass insulation and 13% with the radiant barrier attached to the underside of the roof trusses. The savings in electrical consumption were 17% and 9%, respectively. The electrical consumption data and the cooling load data indicate that the most effective way of installing the foil is to lay it on top of the fiberglass insulation. The radiant barriers reduced the measured peak ceiling heat fluxes by 39% for the case where the barrier was laid on top of the fiberglass insulation. The radiant barrier reduced the integrated heat flows from the attic to the house by approximately 30 to 35% over a 7-day time period.

Levins, W.P.; Karnitz, M.A.

1986-07-01T23:59:59.000Z

53

Detailed Analysis of the Thermal Mass Credits in a Code-Traceable DOE-2 Simulation of the 2001 IECC for a Single-Family Residence in Texas  

E-Print Network (OSTI)

This paper presents the results of a study that investigates the thermal mass credits in the 2001 International Energy Conservation Code (IECC) (ICC 1999, 2001) for a single-family residence in Texas using the DOE-2 building energy simulation program. In this analysis seven different wall types were simulated, and each wall type was matched to the recommended overall U-value of a lightweight wall that meets the prescriptive specifications of the 2001 IECC. This paper presents an analysis of the total annual cooling and heating energy use for wall types with varying thermal mass, and thermostat settings, as well as recommendations concerning the most energy-efficient wall type, and includes input specification methods using the DOE-2 program

Kim, S.; Haberl, J.

2008-12-01T23:59:59.000Z

54

The Munich Rent Advisor: A success for logic programming on then Internet  

Science Conference Proceedings (OSTI)

Most cities in Germany regularly publish a booklet called the Mietspiegel. It basically contains a verbal description of an expert system. It allows the calculation of the estimated fair rent for a flat. By hand, one may need a weekend to do this ... Keywords: constraint handling rules, constraint programming, decision support system, intelligent Internet systems

Thom Frühwirth; Slim Abdennadher

2001-05-01T23:59:59.000Z

55

Preliminary market potential indexing study of the United States for direct gain in new single-family residential construction  

SciTech Connect

The evaluation of the market potential for passive solar designs in residential new construction offers an attractive counterpart to the numerous market penetration assessments that have been performed over the last four years. Market penetration analyses have generally concerned themselves with the long run adoption of solar energy technologies, while Market Potential Indexing (MPI) addressed here examines the near-term attractiveness of solar. The MPI method is briefly reviewed, followed by specification of six attributes that may characterize the residential single-family new construction market. Raw attribute data for each of the six is presented for 220 regions within the United States. Attribute weighting functions are constructed from the perspective of consumers, producers or home builders, and the federal government. Preliminary results from these three perspectives are portrayed for a fixed sized direct gain design.

Robson, W.M.; Roach, F.

1981-01-01T23:59:59.000Z

56

Measured data on energy consumption in single family detached homes across the US  

Science Conference Proceedings (OSTI)

The Community Services Administration (CSA) sponsored, with the technical assistance of the National Bureau of Standards (NBS), a national demonstration on energy conservation. Two hundred and twenty houses were selected in 14 cities across the country to be weatherized and evaluated. Infiltration rates, mechanical efficiencies, building dimensions, solar data and energy consumption data before and after weatherization were collected on each of these houses. The before weatherization data on 33 houses at Charleston, SC, Colorado Springs, CO, and Fargo, ND, are presented. Modified steady-state heat balance calculations which include solar data are also compared to the utility data of each of these houses.

Crenshaw, R.W.

1980-01-01T23:59:59.000Z

57

Single family heating and cooling requirements: Assumptions, methods, and summary results  

Science Conference Proceedings (OSTI)

The research has created a data base of hourly building loads using a state-of-the-art building simulation code (DOE-2.ID) for 8 prototypes, representing pre-1940s to 1990s building practices, in 16 US climates. The report describes the assumed modeling inputs and building operations, defines the building prototypes and selection of base cities, compares the simulation results to both surveyed and measured data sources, and discusses the results. The full data base with hourly space conditioning, water heating, and non-HVAC electricity consumption is available from GRI. In addition, the estimated loads on a per square foot basis are included as well as the peak heating and cooling loads.

Ritschard, R.L.; Hanford, J.W.; Sezgen, A.O. [Lawrence Berkeley Lab., CA (United States)

1992-03-01T23:59:59.000Z

58

Standard Work Specifications for Single-Family Home Energy Upgrades Summary (Fact Sheet), Guidelines For Home Energy Professionals, Energy Efficiency & Renewable Energy (EERE)  

NLE Websites -- All DOE Office Websites (Extended Search)

Work Specifications Work Specifications for Single-Family Home Energy Upgrades Summary The U.S. Department of Energy (DOE), the National Renewable Energy Laboratory (NREL) and numer- ous industry stakeholders developed the Standard Work Specifications for Single-Family Home Energy Upgrades to define the minimum requirements for high- quality residential energy upgrades. The Standard Work Specifications for Single-Family Home Energy Upgrades is the first of three documents that will be published in 2012 and 2013 as part of the Guidelines for Home Energy Professionals project. Specifications for manufactured housing and multifamily homes will also be available. DOE, NREL, and industry developed the Standard Work Specifications under the Weatherization Assistance Program, building on more than 30 years of experience

59

Comparison of actual and predicted energy savings in Minnesota gas-heated single-family homes  

Science Conference Proceedings (OSTI)

Data available from a recent evaluation of a home energy audit program in Minnesota are sufficient to allow analysis of the actual energy savings achieved in audited homes and of the relationship between actual and predicted savings. The program, operated by Northern States Power in much of the southern half of the state, is part of Minnesota's version of the federal Residential Conservation Service. NSP conducted almost 12 thousand RCS audits between April 1981 (when the progam began) and the end of 1982. The data analyzed here, available for 346 homes that obtained an NSP energy audit, include monthly natural gas bills from October 1980 through April 1983; heating degree day data matched to the gas bills; energy audit reports; and information on household demographics, structure characteristics, and recent conservation actions from mail and telephone surveys. The actual reduction in weather-adjusted natural gas use between years 1 and 3 averaged 19 MBtu across these homes (11% of preprogram consumption); the median value of the saving was 16 MBtu/year. The variation in actual saving is quite large: gas consumption increased in almost 20% of the homes, while gas consumption decreased by more than 50 MBtu/year in more than 10% of the homes. These households reported an average expenditure of almost $1600 for the retrofit measures installed in their homes; the variation in retrofit cost, while large, was not as great as the variation in actual natural gas savings.

Hirst, E.; Goeltz, R.

1984-03-01T23:59:59.000Z

60

Analysis of advanced conceptual designs for single-family-sized absorption chillers. Semi-annual report  

DOE Green Energy (OSTI)

The objective of the research program is to develop and analyze new concepts for absorption cycles to improve the performance or reduce the cost (or both) of a 3-ton absorption chiller that can be used with solar-collected heat. New refrigerant-absorbent pairs, additives to currently used refrigerant-absorbent pairs, and modifications to the cycle are being investigated. For the initial analyses the use of a fluid at 160 to 230/sup 0/F from a solar collector as a heating source is assumed. In the initial analyses the chiller is to provide chilled water at 45/sup 0/F at full load; alternatively, if a new refrigerant-absorbent pair appears to be amenable for direct cooling of the occupied space, the temperature of the evaporator is to be 45/sup 0/F. Both water cooling and air cooling of the absorber and the condenser are being studied. The use of ambient air at 95/sup 0/F dry bulb and 75/sup 0/F wet bulb temperatures is assumed. With the water-cooled cycles, the initial and operating costs of a properly sized cooling tower will be included. The research consists of five principal tasks: (a) acquisition of information for analysis, (b) definition of criteria for selection of promising refrigerant-absorbent pairs, additives for currently used pairs, or cycle modifications, (c) preparation and analysis of conceptual designs, (d) comparison and selection of the promising new systems that warrant further study, and (e) recommendations for further research for each promising new system. Progress on each of these tasks is described. (WHK)

None

1978-04-05T23:59:59.000Z

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

SIMULATED BUILDING ENERGY PERFORMANCE OF SINGLE-FAMILY DETACHED RESIDENCES DESIGNED FOR OFF-GRID, OFF-PIPE OPERATION  

SciTech Connect

This paper presents the analysis of energy performance of single-family detached homes in three U.S. climates, in order to determine energy-efficiency measures for minimizing the loads and sizing requirements of renewable energy systems that are essential for its offgrid, off-pipe (i.e., utility-independent) operation. The analysis used a DOE-2.1e simulation model of a 2000/2001 IECC (International Energy Conservation Code) standard house as a base case in three climate locations: Minneapolis, MN, Atlanta, GA, and Phoenix, AZ. This selection of measures and determination of loads for renewable energy systems were accomplished by analyzing the energy use using DOE-2.1e simulations and heating/cooling load components using the Manual J Average Load Procedure. The analysis showed several aspects of building energy performance during different times of the year in terms of available energy resources that are critical for the sizing, utilization, and cost effectiveness of renewable energy systems.

Malhotra, Mini [ORNL; Haberl, Dr. Jeff S. [Texas A& M University

2010-01-01T23:59:59.000Z

62

Ce sont des réactions de fusion qui libèrent l'éner  

NLE Websites -- All DOE Office Websites (Extended Search)

Ce sont des réactions de fusion qui libèrent l'éner- Ce sont des réactions de fusion qui libèrent l'éner- gie qui alimente le soleil et les étoiles. Pour produire cette énergie, des plasmas de haute température doivent être confinés suffisamment longtemps. Les résultats de la recherche en physique des plasmas permettent de recréer sur terre les conditions requises pour la fusion thermonucléaire contrôlée. Leur objectif à long terme est l'approvisionnement énergétique, en complément d'autres sources, pour faire face aux besoins futurs. Sur un fond représentant le Soleil et la Terre, la présente affiche explore les différents thèmes concernés par la fusion: ses rapports avec d'autres formes d'énergie, la physique des réactions de fusion, le confinement et le chauffage des plasmas ainsi que l'avancement des

63

Test for Modeling Windows in DOE 2.1E for Comparing the Window Library with the Shading Coefficient Method for a Single-Family Residence in Texas  

E-Print Network (OSTI)

This study examines the difference of the window simulation test between the Shading Coefficient (SC) and the Window Library (WL) Methods on DOE 2.1E of the 2000 IECC (International Energy Conservation Code) for single-family residences in Texas. The window simulation tests are performed using single-pane, double-pane, and low-e glass on two standard DOE 2.1E single-family house models: 1) the model which has the R-value for wall, roof and floor according to 2000 IECC (Quick Wall), and 2) the model which has the real wood frame wall and has the same R-value as the first one (Thermal Wall). The analysis showed different results according to the types of the glass, simulation method (Shading Coefficient or Window Library), and types of wall (quick wall and thermal wall). The saving of daily peak heating (kBtu/day) from single-pane to low-e glass on thermal mass and quick wall shows the most variation.

Kim, S.; Haberl, J. S.

2008-07-18T23:59:59.000Z

64

Monitoring and evaluation of replacing low-efficiency air conditioners with high-efficiency air conditioners in single-family detached houses in Austin, Texas  

SciTech Connect

The US DOE initiated this project to evaluate the performance of an air conditioner retrofit program in Austin, Texas. The City's Austin's Resource Management Department pursued this project to quantify the retrofit effect of replacing low-efficiency air conditioners with high-efficiency air conditioners in single-family detached homes. If successfully implemented, this retrofit program could help defer construction of a new power plant which is a major goal of this department. The project compares data collected from 12 houses during two cooling seasons under pre-retrofit and then post-retrofit air conditioner units. The existing low-efficiency air conditioners were monitored during the 1987 cooling season, replaced during the 1987--88 heating season with new, smaller sized, high-efficiency units, and then monitored again during the 1988 cooling season. Results indicated that the air conditioner retrofits reduce the annual air conditioner electric consumption and peak electric demand by an average of 38%. When normalized to the nominal capacity of the air conditioner, average demand savings were 1.12 W/ft{sup 2} and estimated annual energy savings were 1.419 kWh/ft{sup 2}. Individual air conditioner power requirements were found to be a well defined function of outdoor temperature as expected. In the absence of detailed data, estimates of the peak demand reductions of new air conditioners can be made from the manufacturer's specifications. Air conditioner energy consumption proved to be strongly linear as a function of the outdoor temperature as expected when taken as an aggregate. No noticeable differences in the diversity factor of the air conditioner usage were found. Analysis of the retrofit effect using PRISM yields estimates of the reduction in normalized annual consumption (NAC) and annual cooling consumption of 12% and 30%. 2 refs., 11 figs., 17 tabs.

Burns, R.; Hough, R.E. (Fleming (W.S.) and Associates, Inc., Syracuse, NY (United States))

1991-10-01T23:59:59.000Z

65

NOx, SOx and CO2 Emissions Reduction from Continuous Commissioning® (CC®) Measures at the Rent-A-Car Facility in the Dallas-Fort Worth International Airport  

E-Print Network (OSTI)

The Energy Systems Laboratory (ESL) at the Texas Engineering Experiment Station, Texas A&M University System was contracted to fulfill a Continuous Commissioning® (CC®)project on the Rent-a-Car facility (RAC) of the Dallas-Fort Worth International Airport (DFWIA) in which energy savings are directly related to an emission reduction that can be credited. The purpose of this study is to estimate the creditable emissions reductions from energy efficiency CC® measures in the RAC of DFWIA.

Baltazar-Cervantes, J. C.; Haberl, J. S.; Yazdani, B.

2006-10-27T23:59:59.000Z

66

Recommendations for 15% Above-Code Energy Efficiency Measures on Implementing Houston Amendments to Single-Family Buildings in Houston Texas  

E-Print Network (OSTI)

This report presents detailed information about the analysis that was performed to calculate the energy saving potential for residential buildings in Houston. In this analysis the energy efficient measures were proposed by the building officials of the City of Houston. Along with the options proposed by the officials, additional measures were selected from the previously-conducted 15% above code energy analysis conducted by the Energy Systems Laboratory for residential houses across the State of Texas. A total of thirty measures were selected based on the energy savings above the base case. These measures were categorized into five groups: Renewable Power Options, Heating Ventilation and Air Conditioning (HVAC), Fenestration, Envelope and Lighting and Domestic Hot Water (DHW) options. The analysis was performed using a simulation model of an International Energy Conservation Code (IECC)-compliant, single family residence in Houston, Texas. Four sets of simulations were considered based on the choice of heating fuel type and thermostat setback: a) natural gas (i.e., gas-fired furnace for space heating, and gas water heater for domestic water heating) with thermostat setback, b) electricity (i.e., heat pump for space heating, and electric water heater for domestic water heating) with thermostat setback, c) natural gas (i.e., gas-fired furnace for space heating, and gas water heater for domestic water heating) without thermostat setback, and d) electricity (i.e., heat pump for space heating, and electric water heater for domestic water heating) without thermostat setback. Individual measures were then categorized into four groups: 2 to 5%, 5 to 10%, and 10 to 15% and above 15% energy savings above base case. Ten grouped measures were then simulated from combining individual measures from the four categories whose combined savings are more than 15% above the base case. The cost of implementation of the individual as well as grouped measures was also calculated along with a simple payback period. The photovoltaic options presented the maximum savings in the approximate range of 15-40% for all base-case houses. The solar thermal option for domestic water heating presented energy savings above 15-20% for all of the base-case houses.

Liu, Z.; Mukhopadhyay, J.; Malhotra, M.; Kota, S.; Haberl, J. S.; Culp, C.; Yazdani, B.

2008-11-01T23:59:59.000Z

67

Field Test Evaluation of Conservation Retrofits of Low-Income, Single-Family Buildings in Wisconsin: Audit Field Test Implementation and Results  

SciTech Connect

This report describes the field test of a retrofit audit. The field test was performed during the winter of 1985-86 in four South Central Wisconsin counties. The purpose of the field test was to measure the energy savings and cost effectiveness of the audit-directed retrofit program for optimizing the programs benefit-to-cost ratio. The audit-directed retrofit program is described briefly in this report and in more detail by another report in this series (ORNL/CON-228/P3). The purpose of this report is to describe the methods and results of the field test. Average energy savings of the 20 retrofitted houses are likely (0.90 probability) to lie between 152 and 262 therms/year/house. The most likely value of the average savings is 207 therms/year/house. These savings are significantly (p < .05) smaller than the audit-predicted savings (286 therms/year/house). Measured savings of individual houses were significantly different than predicted savings for half of the houses. Each house received at least one retrofit. Thirteen of the 20 retrofitted houses received a new condensing furnace or blown-in wall insulation; all but two of the houses received one or more minor retrofits. The seven houses which received condensing furnaces saved, on average, about as much as predicted, but three of the seven houses had significantly more or less savings than predicted. The six houses which received wall insulation saved, on average, about half as much as predicted. The remaining houses which received only minor retrofits saved, on average, less than predicted, but the difference was not significant. Actual retrofit costs were close to expected costs. Overall measured energy savings averaged 15 therms/year per hundred retrofit dollars invested. Houses which received wall insulation or a condensing furnace did slightly better, and the houses which received only minor retrofits did poorly. When estimated program costs were included, average savings dropped to about 13 therms/year/per hundred dollars. The uncertainty associated with the energy savings means that these comparisons of savings and costs also have large uncertainties.

McCold, L.N.

1988-01-01T23:59:59.000Z

68

Chicagoland Single-Family Housing Characterization  

Science Conference Proceedings (OSTI)

In this report, the PARR team identifies housing characteristics and energy use for fifteen housing types (groups) in the Chicagoland (Cook County, Illinois) region and specifies measure packages that provide an optimum level of energy savings based on a BEopt analysis. The analysis is based on assessor data and actual energy consumption data on 432,605 houses representing approximately 30% of the population.

Spanier, J.; Scheu, R.; Brand, L.; Yang, J.

2012-06-01T23:59:59.000Z

69

Buildings Energy Data Book: 2.9 Low-Income Housing  

Buildings Energy Data Book (EERE)

Level and Weatherization Eligibility (Millions) Single-Family Multi-Family Unit Mobile Home 2005 Household Income Own Rent Own Rent Own Rent Less than 15,000 6.1 2.4 0.3 7.1 1.6...

70

Using Adaptive Agent-Based Simulation Models to Assist Planners in Policy: The Case of Rent Control  

E-Print Network (OSTI)

: 2 Computer simulation modeling for policy development in planning has had difficulty gaining a consistent foothold. Reasons for this include bad experiences with large-scale, comprehensive models (e.g., Forrester, 1969) and the lack of theory that one can quantify (Batty, 1994). Batty (1994) has suggested that new types of computational models, based on the tenets of complexity theory (Bernard, under revision) may prove useful. One type of complexity theory model is an "adaptive agent based model" in which the actions, interactions, and adaptations of many autonomous, heterogeneous "agents" (households, firms, etc.) produce emergent, systemwide behavior. One can examine this emergent behavior using commonly employed metrics, but one can also garner a richer, more intuitive understanding of how the individual behavior of the agents self-organize to produce the entire system. Using this type of modeling for small-scale planning problems can both inform planning theorists and improve ...

Robert N. Bernard

1999-01-01T23:59:59.000Z

71

" Million Housing Units, Final"  

U.S. Energy Information Administration (EIA) Indexed Site

2 Appliances in U.S. Homes, by Owner/Renter Status, 2009" 2 Appliances in U.S. Homes, by Owner/Renter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings With" ,"Total U.S.1 (millions)",,,"Detached",,"Attached",,"2 to 4 Units",,"5 or More Units",,"Mobile Homes" "Appliances",,"Own","Rent","Own","Rent","Own","Rent","Own","Rent","Own","Rent","Own","Rent" "Total Homes",113.6,76.5,37.1,63.2,8.6,3.9,2.8,1.5,7.6,2.3,16.8,5.5,1.4 "Cooking Appliances" "Stoves (Units With Both"

72

" Million Housing Units, Final"  

U.S. Energy Information Administration (EIA) Indexed Site

2 Household Demographics of U.S. Homes, by Owner/Renter Status, 2009" 2 Household Demographics of U.S. Homes, by Owner/Renter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings With" ,"Total U.S.1 (millions)",,,"Detached",,"Attached",,"2 to 4 Units",,"5 or More Units",,"Mobile Homes" "Household Demographics",,"Own","Rent","Own","Rent","Own","Rent","Own","Rent","Own","Rent","Own","Rent" "Total Homes",113.6,76.5,37.1,63.2,8.6,3.9,2.8,1.5,7.6,2.3,16.8,5.5,1.4 "Number of Household Members"

73

" Million Housing Units, Final"  

U.S. Energy Information Administration (EIA) Indexed Site

2 Televisions in U.S. Homes, by Owner/Renter Status, 2009" 2 Televisions in U.S. Homes, by Owner/Renter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings With" ,,,,"Detached",,"Attached",,"2 to 4 Units",,"5 or More Units",,"Mobile Homes" ,"Total U.S.1 (millions)" ,,"Own","Rent","Own","Rent","Own","Rent","Own","Rent","Own","Rent","Own","Rent" "Televisions" "Total Homes",113.6,76.5,37.1,63.2,8.6,3.9,2.8,1.5,7.6,2.3,16.8,5.5,1.4 "Televisions" "Number of Televisions"

74

" Million Housing Units, Final"  

U.S. Energy Information Administration (EIA) Indexed Site

2 Air Conditioning in U.S. Homes, by Owner/Renter Status, 2009" 2 Air Conditioning in U.S. Homes, by Owner/Renter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings With" ,,,,"Detached",,"Attached",,"2 to 4 Units",,"5 or More Units",,"Mobile Homes" ,"Total U.S.1 (millions)" "Air Conditioning",,"Own","Rent","Own","Rent","Own","Rent","Own","Rent","Own","Rent","Own","Rent" "Total Homes",113.6,76.5,37.1,63.2,8.6,3.9,2.8,1.5,7.6,2.3,16.8,5.5,1.4 "Air Conditioning Equipment"

75

" Million Housing Units, Final"  

U.S. Energy Information Administration (EIA) Indexed Site

2 Space Heating in U.S. Homes, by Owner/Renter Status, 2009" 2 Space Heating in U.S. Homes, by Owner/Renter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings With" ,,,,"Detached",,"Attached",,"2 to 4 Units",,"5 or More Units",,"Mobile Homes" ,"Total U.S.1 (millions)" ,,"Own","Rent","Own","Rent","Own","Rent","Own","Rent","Own","Rent","Own","Rent" "Space Heating" "Total Homes",113.6,76.5,37.1,63.2,8.6,3.9,2.8,1.5,7.6,2.3,16.8,5.5,1.4 "Space Heating Equipment"

76

Appendix F Cultural Resources, Including  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Appendix F Appendix F Cultural Resources, Including Section 106 Consultation STATE OF CALIFORNIA - THE RESOURCES AGENCY EDMUND G. BROWN, JR., Governor OFFICE OF HISTORIC PRESERVATION DEPARTMENT OF PARKS AND RECREATION 1725 23 rd Street, Suite 100 SACRAMENTO, CA 95816-7100 (916) 445-7000 Fax: (916) 445-7053 calshpo@parks.ca.gov www.ohp.parks.ca.gov June 14, 2011 Reply in Reference To: DOE110407A Angela Colamaria Loan Programs Office Environmental Compliance Division Department of Energy 1000 Independence Ave SW, LP-10 Washington, DC 20585 Re: Topaz Solar Farm, San Luis Obispo County, California Dear Ms. Colamaria: Thank you for seeking my consultation regarding the above noted undertaking. Pursuant to 36 CFR Part 800 (as amended 8-05-04) regulations implementing Section

77

Unions: Rent Extractors or Creators?  

E-Print Network (OSTI)

| surylglqj djhqf| vhuylfhv wkdw lqfuhdvh zrunsodfh surgxfwlylw|1 Lq rxu prgho/ wkh xqlrq ohdghuvkls pdnhv d fkrlfh ehwzhhq wkh wzr w|shv ri dfwlylwlhv/ dqg zh ghprqvwudwh zk| lw lv rswl0 pdo wr hqjdjh lq erwk= uhqw h{wudfwlrq lqfuhdvhv wkh edujdlqhg zdjh udwh... | vshdnlqj rqo| dssolhv wr wkh vkruw0uxq/ lw srlqwv wr dqrwkhu uhdvrq zk| surgxfw pdunhw ghuhjxodwlrq pljkw kdyh odvwlqj h#30;hfwv rq hpsor|phqw= wkh irfxv ri xqlrqv lv vkliwhg wrzdugv zrunsodfh lqqrydwlrqv wkdw lqfuhdvh surgxfwlylw| dqg xowlpdwho| hpsor...

Aidt, Toke S; Sena, Vania

2004-06-16T23:59:59.000Z

78

Countries Gasoline Prices Including Taxes  

Gasoline and Diesel Fuel Update (EIA)

Countries (U.S. dollars per gallon, including taxes) Countries (U.S. dollars per gallon, including taxes) Date Belgium France Germany Italy Netherlands UK US 01/13/14 7.83 7.76 7.90 8.91 8.76 8.11 3.68 01/06/14 8.00 7.78 7.94 8.92 8.74 8.09 3.69 12/30/13 NA NA NA NA NA NA 3.68 12/23/13 NA NA NA NA NA NA 3.63 12/16/13 7.86 7.79 8.05 9.00 8.78 8.08 3.61 12/9/13 7.95 7.81 8.14 8.99 8.80 8.12 3.63 12/2/13 7.91 7.68 8.07 8.85 8.68 8.08 3.64 11/25/13 7.69 7.61 8.07 8.77 8.63 7.97 3.65 11/18/13 7.99 7.54 8.00 8.70 8.57 7.92 3.57 11/11/13 7.63 7.44 7.79 8.63 8.46 7.85 3.55 11/4/13 7.70 7.51 7.98 8.70 8.59 7.86 3.61 10/28/13 8.02 7.74 8.08 8.96 8.79 8.04 3.64 10/21/13 7.91 7.71 8.11 8.94 8.80 8.05 3.70 10/14/13 7.88 7.62 8.05 8.87 8.74 7.97 3.69

79

Include in Column B cost of all composition produced by plant. Include in Column C cost of all operations not involving printing (Col. A)  

E-Print Network (OSTI)

occupied (whether Government-owned or rented), utilities, etc. (14.5 cents per month per square foot. Amount spent for rental of equipment Total cost (Use col.A total from this line to compute cost per 1 units produced in plant this fiscal quarter Total units produced in plant this fiscal year Cost per 1

US Army Corps of Engineers

80

The effects of oil prices and other economic indicators on housing prices in Calgary, Canada  

E-Print Network (OSTI)

This thesis aims to answer: (1) to what extent can oil prices and other economic indicators predict the changes in housing prices and rent in the Calgary single family housing market and (2) to determine what the lag time ...

Padilla, Mercedes A. (Mercedes Angeles)

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Detailed Analysis of Thermal Mass Effects in a Code-Traceable DOE-2 Simulation of the 2000 IECC for a Single-Family Residence in Texas: A Project for Texas' Senate Bill 5 Legislation for Reducing Pollution in Nonattainment and Affected Areas  

E-Print Network (OSTI)

This study examines the thermal mass effects in a code-traceable DOE-2 simulation of the 2000 IECC (International Energy Conservation Code) for a single-family residence in Texas. This report is composed of two major simulations: 1) the simulation according to the location of the insulation of IECC2000, and 2) the simulation according to the types of real brick and block walls which are practically used at the residential house. In this study, the 2000 IECC was used to develop the base case simulation model in Houston, Texas. The DOE-2 energy simulation program was used to analyze changes to the annual energy use caused by changing various building materials. The best energy conservative material layout was then chosen that contained reduced annual energy use, peak cooling and heating loads, and peak day electricity use.

Kim, S.; Haberl, J. S.

2008-07-18T23:59:59.000Z

82

Science Accelerator content now includes multimedia  

Office of Scientific and Technical Information (OSTI)

Science Accelerator content now includes multimedia Science Accelerator has expanded its suite of collections to include ScienceCinema, which contains videos produced by the U.S....

83

Petroleum Gasoline & Distillate Needs Including the Energy ...  

U.S. Energy Information Administration (EIA)

Home > Petroleum > Analysis > Petroleum Gasoline & Distillate Needs Including the Energy Independence and Security Act (EISA) ...

84

Petroleum Gasoline & Distillate Needs Including the Energy ...  

U.S. Energy Information Administration (EIA)

Petroleum Gasoline & Distillate Needs Including the Energy Independence and Security Act (EISA) Impacts

85

Delivering Energy Efficiency to Middle Income Single Family Households  

E-Print Network (OSTI)

Home Energy Management DIY – Do-It-Yourself HERS – Homeare completed. Do-It-Yourself (DIY) Improvements. About oneand financial incentives for DIY improvements.    Flexible

Zimring, Mark

2012-01-01T23:59:59.000Z

86

Delivering Energy Efficiency to Middle Income Single Family Households  

NLE Websites -- All DOE Office Websites (Extended Search)

AHPwES - Assisted Home Performance with ENERGY STAR AMI - Area Median Income APS - Arizona Public Service ARRA - American Reinvestment and Recovery Act ASEC - Annual Social and...

87

HECM Single Family Portfolio Snapshot | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

to the lender up to the maximum claim amount. The loan amount is based on borrower age, home value, and current interest rates. The HECM data files provide loan-level records...

88

California Solar Initiative - Single-Family Affordable Solar...  

Open Energy Info (EERE)

Clean Energy Analysis Low Emission Development Strategies Oil & Gas Smart Grid Solar U.S. OpenLabs Utilities Water Wind Page Actions View form View source History View New...

89

Modeling contaminant exposure in a single-family house  

E-Print Network (OSTI)

New, stricter building codes for energy conservation mandates tighter building construction, which directly reduces the amount of available fresh air from infiltration. This decrease in fresh air is a subject of intensive ...

Huang, Jeffrey M., 1977-

2001-01-01T23:59:59.000Z

90

Delivering Energy Efficiency to Middle Income Single Family Households  

E-Print Network (OSTI)

HVAC replacement, air sealing, duct sealing, additionaltoday – for example, air sealing and climate-appropriatesome combination of air sealing, insulation, lighting

Zimring, Mark

2012-01-01T23:59:59.000Z

91

Delivering Energy Efficiency to Middle Income Single Family Households  

E-Print Network (OSTI)

rentalhousing/Energy_Efficiency_Project/COB_rebates_8.2.11.PDS/rentalhousing/Energy_Efficiency_Project/SmartRegs_Final_s residential energy efficiency loan program November 2010-

Zimring, Mark

2012-01-01T23:59:59.000Z

92

in the U.S. Single Family Residential Market  

E-Print Network (OSTI)

Changes in the Internal Revenue Code create and remove tax-induced trading constraints on homeowners. For example, the Taxpayer Relief Act of 1997 replaced a one-time, post-55 capital gain exclusion with a larger gain exclusion option that could be exercised every two years. We develop a simple demand-based model of housing turnover and use it to determine whether the Taxpayer Relief Act of 1997 led to changes in the percentage of the existing housing stock that was sold in the U.S. and the four geographic regions defined by the U.S. Census Bureau (Northeast, Midwest, South and West). Preliminary results indicate that national and regional turnover measures began to rise immediately after the passage of the 1997 legislation. Given that housing supply is relatively inelastic, at least in the short-run, and that increased demand must drive up prices when supply is constrained, the Taxpayer Relief Act of 1997 may have been one of the sources of the initial price appreciation that led to the Housing Bubble and the related Sub-Prime Mortgage Crisis. If so, the seeds of these unfortunate events were sown much earlier than is generally realized. The Impact of the Taxpayer Relief Act of 1997 on Housing Turnover

Andrea J. Heuson; David Ling

2009-01-01T23:59:59.000Z

93

Code manual for passive solar design single family residential construction  

DOE Green Energy (OSTI)

General information is presented on types of passive solar techniques and a method for estimating passive solar performance. Important codes and standards are described, each description listing the items in the code which could have a potential impact on a passive solar design and analyzing the effect of the code on the use of such techniques. State and local codes and code agencies are summarized. The local summary contains the name of a contact in the enforcement agency to whom specific questions may be addressed. The requirements to file for a building permit are given briefly. (LEW)

None

1979-08-01T23:59:59.000Z

94

Delivering Energy Efficiency to Middle Income Single Family Households  

E-Print Network (OSTI)

and Renewable Energy (DOE EERE), Weatherization andand Roya Stanley (DOE EERE) for their support of thisfor Humanity International DOE EERE – Department of Energy

Zimring, Mark

2012-01-01T23:59:59.000Z

95

California Solar Initiative - Single-Family Affordable Solar...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Alternate Rates for Energy (CARE) program eligibility. (see below) The California Solar Initiative (CSI) provides financial incentives for installing solar technologies...

96

Gas storage materials, including hydrogen storage materials  

DOE Patents (OSTI)

A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

2013-02-19T23:59:59.000Z

97

Intentionally Including - Engaging Minorities in Physics Careers |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Intentionally Including - Engaging Minorities in Physics Careers Intentionally Including - Engaging Minorities in Physics Careers Intentionally Including - Engaging Minorities in Physics Careers April 24, 2013 - 4:37pm Addthis Joining Director Dot Harris (second from left) were Marlene Kaplan, the Deputy Director of Education and director of EPP, National Oceanic and Atmospheric Administration, Claudia Rankins, a Program Officer with the National Science Foundation and Jim Stith, the past Vice-President of the American Institute of Physics Resources. Joining Director Dot Harris (second from left) were Marlene Kaplan, the Deputy Director of Education and director of EPP, National Oceanic and Atmospheric Administration, Claudia Rankins, a Program Officer with the National Science Foundation and Jim Stith, the past Vice-President of the

98

Transmission line including support means with barriers  

DOE Patents (OSTI)

A gas insulated transmission line includes an elongated outer sheath, a plurality of inner conductors disposed within and extending along the outer sheath, and an insulating gas which electrically insulates the inner conductors from the outer sheath. A support insulator insulatably supports the inner conductors within the outer sheath, with the support insulator comprising a main body portion including a plurality of legs extending to the outer sheath, and barrier portions which extend between the legs. The barrier portions have openings therein adjacent the main body portion through which the inner conductors extend.

Cookson, Alan H. (Pittsburgh, PA)

1982-01-01T23:59:59.000Z

99

DISASTER POLICY Including Extreme Emergent Situations (EES)  

E-Print Network (OSTI)

on the ACGME website with information relating to the ACGME response to the disaster. 3. The University-specific Program Requirements. Defined Responsibilities Following the Declaration of a Disaster or Extreme EmergentPage 123 DISASTER POLICY Including Extreme Emergent Situations (EES) The University of Connecticut

Oliver, Douglas L.

100

Buildings Included on EMS Reports"  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of Legacy Management Office of Legacy Management Buildings Included on EMS Reports" "Site","Property Name","Property ID","GSF","Incl. in Water Baseline (CY2007)","Water Baseline (sq. ft.)","Water CY2008 (sq. ft.)","Water CY2009 (sq. ft.)","Water Notes","Incl. in Energy Baseline (CY2003)","Energy Baseline (sq. ft.)","CY2008 Energy (sq. ft.)","CY2009 Energy (sq. ft.)","Energy Notes","Included as Existing Building","CY2008 Existing Building (sq. ft.)","Reason for Building Exclusion" "Column Totals",,"Totals",115139,,10579,10579,22512,,,3183365,26374,115374,,,99476 "Durango, CO, Disposal/Processing Site","STORAGE SHED","DUD-BLDG-STORSHED",100,"no",,,,,"no",,,,"OSF","no",,"Less than 5,000 GSF"

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Power generation method including membrane separation  

SciTech Connect

A method for generating electric power, such as at, or close to, natural gas fields. The method includes conditioning natural gas containing C.sub.3+ hydrocarbons and/or acid gas by means of a membrane separation step. This step creates a leaner, sweeter, drier gas, which is then used as combustion fuel to run a turbine, which is in turn used for power generation.

Lokhandwala, Kaaeid A. (Union City, CA)

2000-01-01T23:59:59.000Z

102

Electric power monthly, September 1990. [Glossary included  

SciTech Connect

The purpose of this report is to provide energy decision makers with accurate and timely information that may be used in forming various perspectives on electric issues. The power plants considered include coal, petroleum, natural gas, hydroelectric, and nuclear power plants. Data are presented for power generation, fuel consumption, fuel receipts and cost, sales of electricity, and unusual occurrences at power plants. Data are compared at the national, Census division, and state levels. 4 figs., 52 tabs. (CK)

1990-12-17T23:59:59.000Z

103

Nuclear reactor shield including magnesium oxide  

DOE Patents (OSTI)

An improvement in nuclear reactor shielding of a type used in reactor applications involving significant amounts of fast neutron flux, the reactor shielding including means providing structural support, neutron moderator material, neutron absorber material and other components as described below, wherein at least a portion of the neutron moderator material is magnesium in the form of magnesium oxide either alone or in combination with other moderator materials such as graphite and iron.

Rouse, Carl A. (Del Mar, CA); Simnad, Massoud T. (La Jolla, CA)

1981-01-01T23:59:59.000Z

104

Thermovoltaic semiconductor device including a plasma filter  

DOE Patents (OSTI)

A thermovoltaic energy conversion device and related method for converting thermal energy into an electrical potential. An interference filter is provided on a semiconductor thermovoltaic cell to pre-filter black body radiation. The semiconductor thermovoltaic cell includes a P/N junction supported on a substrate which converts incident thermal energy below the semiconductor junction band gap into electrical potential. The semiconductor substrate is doped to provide a plasma filter which reflects back energy having a wavelength which is above the band gap and which is ineffectively filtered by the interference filter, through the P/N junction to the source of radiation thereby avoiding parasitic absorption of the unusable portion of the thermal radiation energy.

Baldasaro, Paul F. (Clifton Park, NY)

1999-01-01T23:59:59.000Z

105

Rent Control in the New Lochner Era  

E-Print Network (OSTI)

488 U.S. at 308. 243. Permian Basin Area Rate Cases, 390968 P.2d 993 (1999). 237. Permian Basin Area Rate Cases, 390254. See generally Permian Basin Area Rate Cases, 390 U.S.

Manheim, Karl

2005-01-01T23:59:59.000Z

106

Models of Procyon A including seismic constraints  

E-Print Network (OSTI)

Detailed models of Procyon A based on new asteroseismic measurements by Eggenberger et al (2004) have been computed using the Geneva evolution code including shellular rotation and atomic diffusion. By combining all non-asteroseismic observables now available for Procyon A with these seismological data, we find that the observed mean large spacing of 55.5 +- 0.5 uHz favours a mass of 1.497 M_sol for Procyon A. We also determine the following global parameters of Procyon A: an age of t=1.72 +- 0.30 Gyr, an initial helium mass fraction Y_i=0.290 +- 0.010, a nearly solar initial metallicity (Z/X)_i=0.0234 +- 0.0015 and a mixing-length parameter alpha=1.75 +- 0.40. Moreover, we show that the effects of rotation on the inner structure of the star may be revealed by asteroseismic observations if frequencies can be determined with a high precision. Existing seismological data of Procyon A are unfortunately not accurate enough to really test these differences in the input physics of our models.

P. Eggenberger; F. Carrier; F. Bouchy

2005-01-14T23:59:59.000Z

107

" Million Housing Units, Final"  

U.S. Energy Information Administration (EIA) Indexed Site

2 Water Heating in U.S. Homes, by Owner/Renter Status, 2009" 2 Water Heating in U.S. Homes, by Owner/Renter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings With" ,"Total U.S.1 (millions)",,,"Detached",,"Attached",,"2 to 4 Units",,"5 or More Units",,"Mobile Homes" ,,"Own","Rent","Own","Rent","Own","Rent","Own","Rent","Own","Rent","Own","Rent" "Water Heating" "Total Homes",113.6,76.5,37.1,63.2,8.6,3.9,2.8,1.5,7.6,2.3,16.8,5.5,1.4 "Number of Storage Tank Water Heaters"

108

" Million Housing Units, Final"  

U.S. Energy Information Administration (EIA) Indexed Site

2 Structural and Geographic Characteristics of U.S. Homes, by Owner/Renter Status, 2009" 2 Structural and Geographic Characteristics of U.S. Homes, by Owner/Renter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings With" ,,,,"Detached",,"Attached",,"2 to 4 Units",,"5 or More Units",,"Mobile Homes" ,"Total U.S.1 (millions)" "Structural and Geographic Characteristics",,"Own","Rent","Own","Rent","Own","Rent","Own","Rent","Own","Rent","Own","Rent" "Total Homes",113.6,76.5,37.1,63.2,8.6,3.9,2.8,1.5,7.6,2.3,16.8,5.5,1.4

109

" Million Housing Units, Final"  

U.S. Energy Information Administration (EIA) Indexed Site

2 Computers and Other Electronics in U.S. Homes, by Owner/Renter Status, 2009" 2 Computers and Other Electronics in U.S. Homes, by Owner/Renter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings With" ,,,,"Detached",,"Attached",,"2 to 4 Units",,"5 or More Units",,"Mobile Homes" ,"Total U.S.1 (millions)" ,,"Own","Rent","Own","Rent","Own","Rent","Own","Rent","Own","Rent","Own","Rent" "Computers and Other Electronics" "Total Homes",113.6,76.5,37.1,63.2,8.6,3.9,2.8,1.5,7.6,2.3,16.8,5.5,1.4

110

" Million Housing Units, Final"  

U.S. Energy Information Administration (EIA) Indexed Site

2 Fuels Used and End Uses in U.S. Homes, by Owner/Renter Status, 2009" 2 Fuels Used and End Uses in U.S. Homes, by Owner/Renter Status, 2009" " Million Housing Units, Final" ,,,,"Housing Unit Type" ,,,,"Single-Family Units",,,,"Apartments in Buildings With" ,,,,"Detached",,"Attached",,"2 to 4 Units",,"5 or More Units",,"Mobile Homes" ,"Total U.S.1 (millions)" "Fuels Used and End Uses",,"Own","Rent","Own","Rent","Own","Rent","Own","Rent","Own","Rent","Own","Rent" "Total Homes",113.6,76.5,37.1,63.2,8.6,3.9,2.8,1.5,7.6,2.3,16.8,5.5,1.4 "Fuels Used for Any Use"

111

Water is used for many purposes, includ-ing growing crops, producing copper,  

E-Print Network (OSTI)

WATER USES Water is used for many purposes, includ- ing growing crops, producing copper, generating electricity, watering lawns, keeping clean, drinking and recreation. Bal- ancing the water budget comes down of the water budget. Reducing demand involves re- ducing how much water each person uses, lim- iting the number

112

Office of Legacy Management Buildings Included on EMS Reports...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of Legacy Management Buildings Included on EMS Reports Office of Legacy Management Buildings Included on EMS Reports Office of Legacy Management Buildings Included on EMS...

113

Percentage of Total Natural Gas Residential Deliveries included...  

Gasoline and Diesel Fuel Update (EIA)

City Gate Price Residential Price Percentage of Total Residential Deliveries included in Prices Commercial Price Percentage of Total Commercial Deliveries included in Prices...

114

Property:Number of Plants included in Capacity Estimate | Open...  

Open Energy Info (EERE)

of Plants included in Capacity Estimate Jump to: navigation, search Property Name Number of Plants included in Capacity Estimate Property Type Number Retrieved from "http:...

115

Natural Gas Deliveries to Commercial Consumers (Including Vehicle ...  

U.S. Energy Information Administration (EIA)

Natural Gas Deliveries to Commercial Consumers (Including Vehicle Fuel through 1996) in Wisconsin (Million Cubic Feet)

116

Energetics of a Symmetric Circulation Including Momentum Constraints  

Science Conference Proceedings (OSTI)

A theory of available potential energy (APE) for symmetric circulations, which includes momentum constraints, is presented. The theory is a generalization of the classical theory of APE, which includes only thermal constraints on the circulation. ...

Sorin Codoban; Theodore G. Shepherd

2003-08-01T23:59:59.000Z

117

Guam Refinery Thermal Cracking/Other (including Gas Oil ...  

U.S. Energy Information Administration (EIA)

Guam Refinery Thermal Cracking/Other (including Gas Oil) Downstream Charge Capacity as of January 1 (Barrels per Stream Day)

118

Scheduling optimization of a real flexible job shop including side ...  

E-Print Network (OSTI)

Aug 19, 2013 ... including side constraints regarding preventive maintenance, fixture availabil- ...... Engineering and Engineering Management, pp. 787–791.

119

Percentage of Total Natural Gas Industrial Deliveries included...  

U.S. Energy Information Administration (EIA) Indexed Site

Pipeline and Distribution Use Price City Gate Price Residential Price Percentage of Total Residential Deliveries included in Prices Commercial Price Percentage of Total Commercial...

120

Natural Gas Delivered to Consumers in California (Including ...  

U.S. Energy Information Administration (EIA)

Natural Gas Delivered to Consumers in California (Including Vehicle Fuel) (Million Cubic Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec; ...

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

FAQ 23-How much depleted uranium -- including depleted uranium...  

NLE Websites -- All DOE Office Websites (Extended Search)

is stored in the United States? How much depleted uranium -- including depleted uranium hexafluoride -- is stored in the United States? In addition to the depleted uranium stored...

122

Electrical machines and assemblies including a yokeless stator ...  

Wind Energy; Partners (27) Visual Patent Search; Success Stories; News; Events; Electrical machines and assemblies including a yokeless stator with modular lamination ...

123

U.S. Refinery Thermal Cracking, Other (including Gas Oil ...  

U.S. Energy Information Administration (EIA)

U.S. Refinery Thermal Cracking, Other (including Gas Oil) Downstream Charge Capacity as of January 1 (Barrels per Stream Day)

124

[Article 1 of 7: Motivates and Includes the Consumer  

NLE Websites -- All DOE Office Websites (Extended Search)

will be diverse and widespread, including renewables, distributed generation, and energy storage. And they will increase rapidly all along the value chain, from suppliers to...

125

Stocks of Total Crude Oil and Petroleum Products (Including SPR)  

U.S. Energy Information Administration (EIA)

-No Data Reported; --= Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Notes: Stocks include those ...

126

Including Retro-Commissioning in Federal Energy Savings Performance...  

NLE Websites -- All DOE Office Websites (Extended Search)

11.2 Retro-Cx in Federal ESPCs Including Retro-Commissioning In Federal Energy Saving Performance Contracts Retro-commissioning generally reduces operating and maintenance costs,...

127

PLOT: A UNIX PROGRAM FOR INCLUDING GRAPHICS IN DOCUMENTS  

E-Print Network (OSTI)

simple, easy-to-read graphics language designed specificallyPROGRAM FOR INCLUDING GRAPHICS IN DOCUMENTS Pavel Curtismeanings as in the GRAFPAC graphics system. Definl. ~ tions

Curtis, Pavel

2013-01-01T23:59:59.000Z

128

Natural Gas Deliveries to Commercial Consumers (Including Vehicle...  

Gasoline and Diesel Fuel Update (EIA)

Natural Gas Deliveries to Commercial Consumers (Including Vehicle Fuel through 1996) in South Dakota (Million Cubic Feet) Natural Gas Deliveries to Commercial Consumers...

129

Natural Gas Delivered to Consumers in South Dakota (Including...  

Gasoline and Diesel Fuel Update (EIA)

History: Monthly Annual Download Data (XLS File) Natural Gas Delivered to Consumers in South Dakota (Including Vehicle Fuel) (Million Cubic Feet) Natural Gas Delivered to...

130

Solar Energy Education. Reader, Part II. Sun story. [Includes glossary  

DOE Green Energy (OSTI)

Magazine articles which focus on the subject of solar energy are presented. The booklet prepared is the second of a four part series of the Solar Energy Reader. Excerpts from the magazines include the history of solar energy, mythology and tales, and selected poetry on the sun. A glossary of energy related terms is included. (BCS)

Not Available

1981-05-01T23:59:59.000Z

131

Energy Transitions: A Systems Approach Including Marcellus Shale Gas Development  

E-Print Network (OSTI)

Energy Transitions: A Systems Approach Including Marcellus Shale Gas Development A Report: A Systems Approach Including Marcellus Shale Gas Development Executive Summary In the 21st century new we focused on the case of un- conventional natural gas recovery from the Marcellus shale In addition

Walter, M.Todd

132

Energy Transitions: A Systems Approach Including Marcellus Shale Gas Development  

E-Print Network (OSTI)

Energy Transitions: A Systems Approach Including Marcellus Shale Gas Development A Report Transitions: A Systems Approach Including Marcellus Shale Gas Development Executive Summary In the 21st the Marcellus shale In addition to the specific questions identified for the case of Marcellus shale gas in New

Angenent, Lars T.

133

What To Include In The Whistleblower Complaint? | National Nuclear Security  

National Nuclear Security Administration (NNSA)

To Include In The Whistleblower Complaint? | National Nuclear Security To Include In The Whistleblower Complaint? | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog What To Include In The Whistleblower Complaint? Home > About Us > Our Operations > Management and Budget > Whistleblower Program > What To Include In The Whistleblower Complaint? What To Include In The Whistleblower Complaint?

134

U-182: Microsoft Windows Includes Some Invalid Certificates | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

82: Microsoft Windows Includes Some Invalid Certificates 82: Microsoft Windows Includes Some Invalid Certificates U-182: Microsoft Windows Includes Some Invalid Certificates June 4, 2012 - 7:00am Addthis PROBLEM: A vulnerability was reported in Microsoft Windows. A remote user may be able to spoof code signing signatures. PLATFORM: Version(s): XP SP3, 2003 SP2, Vista SP2, 2008 SP2, 7 SP1, 2008 R2 SP1; and prior service packs ABSTRACT: The operating system includes some invalid intermediate certificates. The vulnerability is due to the certificate authorities and not the operating system itself. Reference Links: Security tracker ID 1027114 GENERIC-MAP-NOMATCH Vendor Advisory IMPACT ASSESSMENT: High Discussion: The invalid certificates and their thumbprints are: Microsoft Enforced Licensing Intermediate PCA: 2a 83 e9 02 05 91 a5 5f c6

135

Removal of mineral matter including pyrite from coal  

SciTech Connect

Mineral matter, including pyrite, is removed from coal by treatment of the coal with aqueous alkali at a temperature of about 175.degree. to 350.degree. C, followed by acidification with strong acid.

Reggel, Leslie (Pittsburgh, PA); Raymond, Raphael (Bethel Park, PA); Blaustein, Bernard D. (Pittsburgh, PA)

1976-11-23T23:59:59.000Z

136

Free Energy Efficiency Kit includes CFL light bulbs,  

E-Print Network (OSTI)

Free Energy Efficiency Kit Kit includes CFL light bulbs, spray foam, low-flow shower head, and more i ci e n cy On Thursday, March 31st New River Light & Power will sponsor a seminar that is designed

Rose, Annkatrin

137

Characterizations of Aircraft Icing Environments that Include Supercooled Large Drops  

Science Conference Proceedings (OSTI)

Measurements of aircraft icing environments that include supercooled large drops (SLD) greater than 50 ?m in diameter have been made during 38 research flights. These flights were conducted during the First and Third Canadian Freezing Drizzle ...

Stewart G. Cober; George A. Isaac; J. Walter Strapp

2001-11-01T23:59:59.000Z

138

Including costs of supply chain risk in strategic sourcing decisions  

E-Print Network (OSTI)

Cost evaluations do not always include the costs associated with risks when organizations make strategic sourcing decisions. This research was conducted to establish and quantify the impact of risks and risk-related costs ...

Jain, Avani

2009-01-01T23:59:59.000Z

139

Including Atmospheric Layers in Vegetation and Urban Offline Surface Schemes  

Science Conference Proceedings (OSTI)

A formulation to include prognostic atmospheric layers in offline surface schemes is derived from atmospheric equations. Whereas multilayer schemes developed previously need a complex coupling between atmospheric-model levels and surface-scheme ...

Valéry Masson; Yann Seity

2009-07-01T23:59:59.000Z

140

Percentage of Total Natural Gas Commercial Deliveries included in Prices  

Gasoline and Diesel Fuel Update (EIA)

City Gate Price Residential Price Percentage of Total Residential Deliveries included in Prices Commercial Price Percentage of Total Commercial Deliveries included in Prices Industrial Price Percentage of Total Industrial Deliveries included in Prices Electric Power Price Period: Monthly Annual City Gate Price Residential Price Percentage of Total Residential Deliveries included in Prices Commercial Price Percentage of Total Commercial Deliveries included in Prices Industrial Price Percentage of Total Industrial Deliveries included in Prices Electric Power Price Period: Monthly Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Data Series Area May-13 Jun-13 Jul-13 Aug-13 Sep-13 Oct-13 View History U.S. 63.3 59.3 57.9 57.0 57.4 61.3 1983-2013 Alabama 71.7 71.0 68.5 68.2 68.4 66.7 1989-2013 Alaska 94.1 91.6 91.1 91.0 92.3 92.6 1989-2013 Arizona 84.0 83.0 81.6 80.3 82.8 82.7 1989-2013 Arkansas 37.8 28.3 28.1 28.6 26.7 28.0 1989-2013

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Percentage of Total Natural Gas Industrial Deliveries included in Prices  

Gasoline and Diesel Fuel Update (EIA)

City Gate Price Residential Price Percentage of Total Residential Deliveries included in Prices Commercial Price Percentage of Total Commercial Deliveries included in Prices Industrial Price Percentage of Total Industrial Deliveries included in Prices Electric Power Price Period: Monthly Annual City Gate Price Residential Price Percentage of Total Residential Deliveries included in Prices Commercial Price Percentage of Total Commercial Deliveries included in Prices Industrial Price Percentage of Total Industrial Deliveries included in Prices Electric Power Price Period: Monthly Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Data Series Area May-13 Jun-13 Jul-13 Aug-13 Sep-13 Oct-13 View History U.S. 16.5 16.3 16.0 16.2 16.6 16.9 2001-2013 Alabama 22.1 21.7 21.6 22.8 22.0 22.7 2001-2013 Alaska 100.0 100.0 100.0 100.0 100.0 100.0 2001-2013 Arizona 13.4 15.7 15.3 13.8 13.7 13.9 2001-2013 Arkansas 1.7 1.4 1.2 1.4 1.3 1.5 2001-2013

142

Introduction to Small-Scale Photovoltaic Systems (Including RETScreen Case  

Open Energy Info (EERE)

Introduction to Small-Scale Photovoltaic Systems (Including RETScreen Case Introduction to Small-Scale Photovoltaic Systems (Including RETScreen Case Study) (Webinar) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Introduction to Small-Scale Photovoltaic Systems (Including RETScreen Case Study) (Webinar) Focus Area: Solar Topics: Market Analysis Website: www.leonardo-energy.org/webinar-introduction-small-scale-photovoltaic- Equivalent URI: cleanenergysolutions.org/content/introduction-small-scale-photovoltaic Language: English Policies: Deployment Programs DeploymentPrograms: Project Development This video teaches the viewer about photovoltaic arrays and RETscreen's photovoltaic module, which can be used to project the cost and production of an array. An example case study was

143

projects are valued at approximately $67 million (including $15 million  

NLE Websites -- All DOE Office Websites (Extended Search)

projects are valued at approximately $67 million (including $15 million projects are valued at approximately $67 million (including $15 million in non-Federal cost sharing) over four years. The overall goal of the research is to develop carbon dioxide (CO 2 ) capture and separation technologies that can achieve at least 90 percent CO 2 removal at no more than a 35 percent increase in the cost of electricity. The projects, managed by FE's National Energy Technology Laboratory (NETL), include: (1) Linde, LLC, which will use a post-combustion capture technology incorporating BASF's novel amine-based process at a 1-megawatt electric (MWe) equivalent slipstream pilot plant at the National Carbon Capture Center (NCCC) (DOE contribution: $15 million); (2) Neumann Systems Group, Inc., which will design, construct, and test a patented NeuStreamTM absorber at the Colorado

144

Honda Smart Home to Include Berkeley Lab Ventilation Controller  

NLE Websites -- All DOE Office Websites (Extended Search)

Honda Smart Home to Include Berkeley Lab Ventilation Controller Honda Smart Home to Include Berkeley Lab Ventilation Controller Honda smart home October 2013 October-November Special Focus: Energy Efficiency, Buildings, and the Electric Grid Honda Motor Company Inc is proceeding with plans to build a Smart Home in Davis, California, to demonstrate the latest in renewable energy technologies and energy efficiency. The home is expected to produce more energy than is consumed, demonstrating how the goal of "zero net energy" can be met in the near term future. A ventilation controller developed by researchers at Berkeley Lab's Environmental Energy Technologies Division (EETD) will be included in the smart home. EETD is currently working with the developers of the home control system to integrate its control algorithms.

145

DOE Revises its NEPA Regulations, Including Categorical Exclusions |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Revises its NEPA Regulations, Including Categorical Exclusions Revises its NEPA Regulations, Including Categorical Exclusions DOE Revises its NEPA Regulations, Including Categorical Exclusions September 30, 2011 - 2:30pm Addthis On September 27, 2011, the Department of Energy (DOE) approved revisions to its National Environmental Policy Act (NEPA) regulations, and on September 28th, submitted the revisions to the Federal Register. The final regulations, which become effective 30 days after publication in the Federal Register, are the culmination of a 2-year process to review and update DOE's NEPA implementing procedures. This process involved internal evaluation, public participation, and Council on Environmental Quality (CEQ) review. The revisions are designed to focus Departmental resources on projects with the potential for significant environmental impact, to better

146

Solar Energy Education. Renewable energy: a background text. [Includes glossary  

SciTech Connect

Some of the most common forms of renewable energy are presented in this textbook for students. The topics include solar energy, wind power hydroelectric power, biomass ocean thermal energy, and tidal and geothermal energy. The main emphasis of the text is on the sun and the solar energy that it yields. Discussions on the sun's composition and the relationship between the earth, sun and atmosphere are provided. Insolation, active and passive solar systems, and solar collectors are the subtopics included under solar energy. (BCS)

1985-01-01T23:59:59.000Z

147

Thin film solar cell including a spatially modulated intrinsic layer  

SciTech Connect

One or more thin film solar cells in which the intrinsic layer of substantially amorphous semiconductor alloy material thereof includes at least a first band gap portion and a narrower band gap portion. The band gap of the intrinsic layer is spatially graded through a portion of the bulk thickness, said graded portion including a region removed from the intrinsic layer-dopant layer interfaces. The band gap of the intrinsic layer is always less than the band gap of the doped layers. The gradation of the intrinsic layer is effected such that the open circuit voltage and/or the fill factor of the one or plural solar cell structure is enhanced.

Guha, Subhendu (Troy, MI); Yang, Chi-Chung (Troy, MI); Ovshinsky, Stanford R. (Bloomfield Hills, MI)

1989-03-28T23:59:59.000Z

148

Solar Energy Education. Renewable energy: a background text. [Includes glossary  

DOE Green Energy (OSTI)

Some of the most common forms of renewable energy are presented in this textbook for students. The topics include solar energy, wind power hydroelectric power, biomass ocean thermal energy, and tidal and geothermal energy. The main emphasis of the text is on the sun and the solar energy that it yields. Discussions on the sun's composition and the relationship between the earth, sun and atmosphere are provided. Insolation, active and passive solar systems, and solar collectors are the subtopics included under solar energy. (BCS)

Not Available

1985-01-01T23:59:59.000Z

149

Addressing questions about including environmental effects in the DMSO HLA  

SciTech Connect

The Defense Modeling and Simulation Office (DMSO) is developing a High Level Architecture (HLA) to support the DOD Modeling and Simulation (M and S) community. Many, if not all, of the simulations involve the environment in some fashion. In some applications, the simulation takes place in an acknowledged environment without any environmental functionality being taken into account. The Joint Training Federation Prototype (JTFp) is one of several prototype efforts that have been created to provide a test of the DMSO HLA. In addition to addressing the applicability of the HLA to a training community, the JTFp is also one of two prototype efforts that is explicitly including environmental effects in their simulation effort. These two prototyping efforts are examining the issues associated with the inclusion of the environment in an HLA federation. In deciding whether or not to include an environmental federation in the JTFp effort, a number of questions have been raised about the environment and the HLA. These questions have raised the issue of incompatibility between the environment and the HLA and also shown that there is something unique about including the environment in simulations. The purpose of this White Paper, which was developed with inputs from the National Air and Space [Warfare] Model Program among others, is to address the various questions that have been posed about including environmental effects in an HLA simulation.

Hummel, J.R.

1996-10-01T23:59:59.000Z

150

cDNA encoding a polypeptide including a hevein sequence  

DOE Patents (OSTI)

A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1,018 nucleotides long and includes an open reading frame of 204 amino acids.

Raikhel, N.V.; Broekaert, W.F.; Namhai Chua; Kush, A.

1993-02-16T23:59:59.000Z

151

Thermal Unit Commitment Including Optimal AC Power Flow Constraints  

E-Print Network (OSTI)

Thermal Unit Commitment Including Optimal AC Power Flow Constraints Carlos Murillo{Sanchez Robert J algorithm for unit commitment that employs a Lagrange relaxation technique with a new augmentation. This framework allows the possibility of committing units that are required for the VArs that they can produce

152

Major initiatives in materials research at Western include  

E-Print Network (OSTI)

in nuclear reactors; and a third in Engineering- J. Jiang, supported by UNENE, working on control in the theory of condensed matter, including its applications to polymers, optical, electronic, and magnetic NSERC Industrial Research Chairs who together make Western a leading university in nuclear power

Christensen, Dan

153

DOE Considers Natural Gas Utility Service Options: Proposal Includes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Considers Natural Gas Utility Service Options: Proposal Considers Natural Gas Utility Service Options: Proposal Includes 30-mile Natural Gas Pipeline from Pasco to Hanford DOE Considers Natural Gas Utility Service Options: Proposal Includes 30-mile Natural Gas Pipeline from Pasco to Hanford January 23, 2012 - 12:00pm Addthis Media Contacts Cameron Hardy, DOE , (509) 376-5365, Cameron.Hardy@rl.doe.gov RICHLAND, WASH. - The U.S. Department of Energy (DOE) is considering natural gas transportation and distribution requirements to support the Waste Treatment Plant (WTP) and evaporator operations at the Hanford Site in southeastern Washington State. DOE awarded a task order worth up to $5 million to the local, licensed supplier of natural gas in the Hanford area, Cascade Natural Gas Corporation (Cascade). Cascade will support DOE and its Environmental

154

Italy (including San Marino) Fossil-Fuel CO2 Emissions  

NLE Websites -- All DOE Office Websites (Extended Search)

Western Europe » Italy Western Europe » Italy (including San Marino) Italy (including San Marino) Fossil-Fuel CO2 Emissions Graph graphic Graphics Data graphic Data Trends As occurred in many industrialized nations, CO2 emissions from Italy rose steeply since the late 1940's until the growth was abruptly terminated in 1974. Since 1974, emissions from liquid fuels have vacillated, dropping from 76% to 46% of a static but varying total. Significant increases in natural gas consumption have compensated for the drop in oil consumption. In 2008, 35.8% of Italy's fossil-fuel CO2 emissions were due to natural gas consumption. Coal usage grew steadily until 1985 when CO2 emissions from coal consumption reached 16 million metric tons of carbon. Not until 2004 did coal usage exceed 1985 levels and now accounts for 13.9% of Italy's

155

Coordination). Participants include representatives from Balancing Authorities (BAs), Reliability  

E-Print Network (OSTI)

The MRO Subject Matter Expert Team is an industry stakeholder group which includes subject matter experts from MRO member organizations in various technical areas. Any materials, guidance, and views from stakeholder groups are meant to be helpful to industry participants; but should not be considered approved or endorsed by MRO staff or its board of directors unless specified. Page | 2 Disclaimer The Midwest Reliability Organization (MRO) Standards Committee (SC) is committed to providing training and non-binding guidance to industry stakeholders regarding existing and emerging Reliability Standards. Any materials, including presentations, were developed through the MRO SC by Subject Matter Experts (SMEs) from member organizations within the MRO region. In 2012, SMEs in the field of System Operator Communications were brought together to prepare a guide for complying with NERC Reliability Standard COM-002-2 (Communications and

Will Behnke; Alliant Energy; Jacalynn Bentz; Great River Energy; Marie Knox Miso; Jacalynn Bentz; Marie Knox; Terry Harbour

2013-01-01T23:59:59.000Z

156

Flicker Performance of Modern Lighting Technologies including Impacts of Dimmers  

Science Conference Proceedings (OSTI)

The existing industry standards on flicker measurement and assessment are based on the response of general purpose incandescent lamps. However, worldwide these lamps are being replaced with more energy efficient lamps including Compact Fluorescent Lamps (CFLs) and Light emitting Diode (LED) lamps. In order to keep the flicker standards relevant, the industry standard bodies on the subject are in need of the evidence that compares the flicker performance of new lighting ...

2012-12-12T23:59:59.000Z

157

Conversion of geothermal waste to commercial products including silica  

DOE Patents (OSTI)

A process for the treatment of geothermal residue includes contacting the pigmented amorphous silica-containing component with a depigmenting reagent one or more times to depigment the silica and produce a mixture containing depigmented amorphous silica and depigmenting reagent containing pigment material; separating the depigmented amorphous silica and from the depigmenting reagent to yield depigmented amorphous silica. Before or after the depigmenting contacting, the geothermal residue or depigmented silica can be treated with a metal solubilizing agent to produce another mixture containing pigmented or unpigmented amorphous silica-containing component and a solubilized metal-containing component; separating these components from each other to produce an amorphous silica product substantially devoid of metals and at least partially devoid of pigment. The amorphous silica product can be neutralized and thereafter dried at a temperature from about 25.degree. C. to 300.degree. C. The morphology of the silica product can be varied through the process conditions including sequence contacting steps, pH of depigmenting reagent, neutralization and drying conditions to tailor the amorphous silica for commercial use in products including filler for paint, paper, rubber and polymers, and chromatographic material.

Premuzic, Eugene T. (East Moriches, NY); Lin, Mow S. (Rocky Point, NY)

2003-01-01T23:59:59.000Z

158

Multi-processor including data flow accelerator module  

DOE Patents (OSTI)

An accelerator module for a data flow computer includes an intelligent memory. The module is added to a multiprocessor arrangement and uses a shared tagged memory architecture in the data flow computer. The intelligent memory module assigns locations for holding data values in correspondence with arcs leading to a node in a data dependency graph. Each primitive computation is associated with a corresponding memory cell, including a number of slots for operands needed to execute a primitive computation, a primitive identifying pointer, and linking slots for distributing the result of the cell computation to other cells requiring that result as an operand. Circuitry is provided for utilizing tag bits to determine automatically when all operands required by a processor are available and for scheduling the primitive for execution in a queue. Each memory cell of the module may be associated with any of the primitives, and the particular primitive to be executed by the processor associated with the cell is identified by providing an index, such as the cell number for the primitive, to the primitive lookup table of starting addresses. The module thus serves to perform functions previously performed by a number of sections of data flow architectures and coexists with conventional shared memory therein. A multiprocessing system including the module operates in a hybrid mode, wherein the same processing modules are used to perform some processing in a sequential mode, under immediate control of an operating system, while performing other processing in a data flow mode.

Davidson, George S. (Albuquerque, NM); Pierce, Paul E. (Albuquerque, NM)

1990-01-01T23:59:59.000Z

159

Global Analysis of Solar Neutrino Oscillations Including SNO CC Measurement  

E-Print Network (OSTI)

For active and sterile neutrinos, we present the globally allowed solutions for two neutrino oscillations. We include the SNO CC measurement and all other relevant solar neutrino and reactor data. Five active neutrino oscillation solutions (LMA, LOW, SMA, VAC, and Just So2) are currently allowed at 3 sigma; three sterile neutrino solutions (Just So2, SMA, and VAC) are allowed at 3 sigma. The goodness of fit is satisfactory for all eight solutions. We also investigate the robustness of the allowed solutions by carrying out global analyses with and without: 1) imposing solar model constraints on the 8B neutrino flux, 2) including the Super-Kamiokande spectral energy distribution and day-night data, 3) including a continuous mixture of active and sterile neutrinos, 4) using an enhanced CC cross section for deuterium (due to radiative corrections), and 5) a optimistic, hypothetical reduction by a factor of three of the error of the SNO CC rate. For every analysis strategy used in this paper, the most favored solutions all involve large mixing angles: LMA, LOW, or VAC. The favored solutions are robust, but the presence at 3 sigma of individual sterile solutions and the active Just So2 solution is sensitive to the analysis assumptions.

John N. Bahcall; M. C. Gonzalez-Garcia; Carlos Pena-Garay

2001-06-25T23:59:59.000Z

160

Information regarding previous INCITE awards including selected highlights  

Office of Science (SC) Website

Information regarding previous INCITE awards including selected highlights Advanced Scientific Computing Research (ASCR) ASCR Home About Research Facilities Accessing ASCR Supercomputers Oak Ridge Leadership Computing Facility (OLCF) Argonne Leadership Computing Facility (ALCF) National Energy Research Scientific Computing Center (NERSC) Energy Sciences Network (ESnet) Research & Evaluation Prototypes (REP) Innovative & Novel Computational Impact on Theory and Experiment (INCITE) ASCR Leadership Computing Challenge (ALCC) Science Highlights Benefits of ASCR Funding Opportunities Advanced Scientific Computing Advisory Committee (ASCAC) News & Resources Contact Information Advanced Scientific Computing Research U.S. Department of Energy SC-21/Germantown Building

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Composite armor, armor system and vehicle including armor system  

DOE Patents (OSTI)

Composite armor panels are disclosed. Each panel comprises a plurality of functional layers comprising at least an outermost layer, an intermediate layer and a base layer. An armor system incorporating armor panels is also disclosed. Armor panels are mounted on carriages movably secured to adjacent rails of a rail system. Each panel may be moved on its associated rail and into partially overlapping relationship with another panel on an adjacent rail for protection against incoming ordnance from various directions. The rail system may be configured as at least a part of a ring, and be disposed about a hatch on a vehicle. Vehicles including an armor system are also disclosed.

Chu, Henry S.; Jones, Warren F.; Lacy, Jeffrey M.; Thinnes, Gary L.

2013-01-01T23:59:59.000Z

162

cDNA encoding a polypeptide including a hevein sequence  

DOE Patents (OSTI)

A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a pu GOVERNMENT RIGHTS This application was funded under Department of Energy Contract DE-AC02-76ER01338. The U.S. Government has certain rights under this application and any patent issuing thereon.

Raikhel, Natasha V. (Okemos, MI); Broekaert, Willem F. (Dilbeek, BE); Chua, Nam-Hai (Scarsdale, NY); Kush, Anil (New York, NY)

1993-02-16T23:59:59.000Z

163

Composite material including nanocrystals and methods of making  

DOE Patents (OSTI)

Temperature-sensing compositions can include an inorganic material, such as a semiconductor nanocrystal. The nanocrystal can be a dependable and accurate indicator of temperature. The intensity of emission of the nanocrystal varies with temperature and can be highly sensitive to surface temperature. The nanocrystals can be processed with a binder to form a matrix, which can be varied by altering the chemical nature of the surface of the nanocrystal. A nanocrystal with a compatibilizing outer layer can be incorporated into a coating formulation and retain its temperature sensitive emissive properties

Bawendi, Moungi G. (Boston, MA); Sundar, Vikram C. (New York, NY)

2008-02-05T23:59:59.000Z

164

Community Assessment Tool for Public Health Emergencies Including Pandemic Influenza  

SciTech Connect

The Community Assessment Tool (CAT) for Public Health Emergencies Including Pandemic Influenza (hereafter referred to as the CAT) was developed as a result of feedback received from several communities. These communities participated in workshops focused on influenza pandemic planning and response. The 2008 through 2011 workshops were sponsored by the Centers for Disease Control and Prevention (CDC). Feedback during those workshops indicated the need for a tool that a community can use to assess its readiness for a disaster - readiness from a total healthcare perspective, not just hospitals, but the whole healthcare system. The CAT intends to do just that - help strengthen existing preparedness plans by allowing the healthcare system and other agencies to work together during an influenza pandemic. It helps reveal each core agency partners (sectors) capabilities and resources, and highlights cases of the same vendors being used for resource supplies (e.g., personal protective equipment [PPE] and oxygen) by the partners (e.g., public health departments, clinics, or hospitals). The CAT also addresses gaps in the community's capabilities or potential shortages in resources. This tool has been reviewed by a variety of key subject matter experts from federal, state, and local agencies and organizations. It also has been piloted with various communities that consist of different population sizes, to include large urban to small rural communities.

ORAU's Oak Ridge Institute for Science Education (HCTT-CHE)

2011-04-14T23:59:59.000Z

165

Community Assessment Tool for Public Health Emergencies Including Pandemic Influenza  

SciTech Connect

The Community Assessment Tool (CAT) for Public Health Emergencies Including Pandemic Influenza (hereafter referred to as the CAT) was developed as a result of feedback received from several communities. These communities participated in workshops focused on influenza pandemic planning and response. The 2008 through 2011 workshops were sponsored by the Centers for Disease Control and Prevention (CDC). Feedback during those workshops indicated the need for a tool that a community can use to assess its readiness for a disaster - readiness from a total healthcare perspective, not just hospitals, but the whole healthcare system. The CAT intends to do just that - help strengthen existing preparedness plans by allowing the healthcare system and other agencies to work together during an influenza pandemic. It helps reveal each core agency partners (sectors) capabilities and resources, and highlights cases of the same vendors being used for resource supplies (e.g., personal protective equipment [PPE] and oxygen) by the partners (e.g., public health departments, clinics, or hospitals). The CAT also addresses gaps in the community's capabilities or potential shortages in resources. This tool has been reviewed by a variety of key subject matter experts from federal, state, and local agencies and organizations. It also has been piloted with various communities that consist of different population sizes, to include large urban to small rural communities.

ORAU' s Oak Ridge Institute for Science Education (HCTT-CHE)

2011-04-14T23:59:59.000Z

166

Notices ROUTINE USES OF RECORDS MAINTAINED IN THE SYSTEM, INCLUDING  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

83 Federal Register 83 Federal Register / Vol. 78, No. 51 / Friday, March 15, 2013 / Notices ROUTINE USES OF RECORDS MAINTAINED IN THE SYSTEM, INCLUDING CATEGORIES OF USERS AND THE PURPOSES OF SUCH USES: The Department may disclose information contained in a record in this system of records under the routine uses listed in this system of records without the consent of the individual if the disclosure is compatible with the purposes for which the record was collected. These disclosures may be made on a case-by-case basis or, if the Department has complied with the computer matching requirements of the Privacy Act of 1974, as amended (Privacy Act), under a computer matching agreement. Any disclosure of individually identifiable information from a record in this system must also comply with the requirements of section

167

Copper laser modulator driving assembly including a magnetic compression laser  

DOE Patents (OSTI)

A laser modulator (10) having a low voltage assembly (12) with a plurality of low voltage modules (14) with first stage magnetic compression circuits (20) and magnetic assist inductors (28) with a common core (91), such that timing of the first stage magnetic switches (30b) is thereby synchronized. A bipolar second stage of magnetic compression (42) is coupled to the low voltage modules (14) through a bipolar pulse transformer (36) and a third stage of magnetic compression (44) is directly coupled to the second stage of magnetic compression (42). The low voltage assembly (12) includes pressurized boxes (117) for improving voltage standoff between the primary winding assemblies (34) and secondary winding (40) contained therein.

Cook, Edward G. (Livermore, CA); Birx, Daniel L. (Oakley, CA); Ball, Don G. (Livermore, CA)

1994-01-01T23:59:59.000Z

168

[Article 1 of 7: Motivates and Includes the Consumer]  

NLE Websites -- All DOE Office Websites (Extended Search)

2 of 7: Research on the Characteristics of a Modern Grid by the NETL 2 of 7: Research on the Characteristics of a Modern Grid by the NETL Modern Grid Strategy Team Accommodates All Generation and Storage Options Last month we presented the first Principal Characteristic of a Modern Grid, "Motivates and Includes the Consumer". This month we present a second characteristic, "Accommodates All Generation and Storage Options". This characteristic will fundamentally transition today's grid from a centralized model for generation to one that also has a more balanced contribution from decentralized generation and storage. This characteristic, along with the other six, define a Modern Grid that will power the 21 st Century economy. For a more detailed discussion on "Accommodates All Generation and Storage Options", please see:

169

Search for Earth-like planets includes LANL star analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

Search for earth-like planets Search for earth-like planets Search for Earth-like planets includes LANL star analysis The mission will not only be able to search for planets around other stars, but also yield new insights into the parent stars themselves. March 6, 2009 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials.

170

Dye laser amplifier including a specifically designed diffuser assembly  

SciTech Connect

A large (high flow rate) dye laser amplifier in which a continuous replened supply of dye is excited by a first light beam, specifically a copper vapor laser beam, in order to amplify the intensity of a second different light beam, specifically a dye beam, passing through the dye is disclosed herein. This amplifier includes a dye cell defining a dye chamber through which a continuous stream of dye is caused to pass at a relatively high flow rate and a specifically designed diffuser assembly for slowing down the flow of dye while, at the same time, assuring that as the dye stream flows through the diffuser assembly it does so in a stable manner.

Davin, James (Gilroy, CA); Johnston, James P. (Stanford, CA)

1992-01-01T23:59:59.000Z

171

Electra-optical device including a nitrogen containing electrolyte  

DOE Patents (OSTI)

Described is a thin-film battery, especially a thin-film microbattery, and a method for making same having application as a backup or primary integrated power source for electronic devices. The battery includes a novel electrolyte which is electrochemically stable and does not react with the lithium anode and a novel vanadium oxide cathode. Configured as a microbattery, the battery can be fabricated directly onto a semiconductor chip, onto the semiconductor die or onto any portion of the chip carrier. The battery can be fabricated to any specified size or shape to meet the requirements of a particular application. The battery is fabricated of solid state materials and is capable of operation between {minus}15 C and 150 C.

Bates, J.B.; Dudney, N.J.; Gruzalski, G.R.; Luck, C.F.

1995-10-03T23:59:59.000Z

172

Hydraulic engine valve actuation system including independent feedback control  

DOE Patents (OSTI)

A hydraulic valve actuation assembly may include a housing, a piston, a supply control valve, a closing control valve, and an opening control valve. The housing may define a first fluid chamber, a second fluid chamber, and a third fluid chamber. The piston may be axially secured to an engine valve and located within the first, second and third fluid chambers. The supply control valve may control a hydraulic fluid supply to the piston. The closing control valve may be located between the supply control valve and the second fluid chamber and may control fluid flow from the second fluid chamber to the supply control valve. The opening control valve may be located between the supply control valve and the second fluid chamber and may control fluid flow from the supply control valve to the second fluid chamber.

Marriott, Craig D

2013-06-04T23:59:59.000Z

173

A thermovoltaic semiconductor device including a plasma filter  

DOE Patents (OSTI)

A thermovoltaic energy conversion device and related method for converting thermal energy into an electrical potential are disclosed. An interference filter is provided on a semiconductor thermovoltaic cell to pre-filter black body radiation. The semiconductor thermovoltaic cell includes a P/N junction supported on a substrate which converts incident thermal energy below the semiconductor junction band gap into electrical potential. The semiconductor substrate is doped to provide a plasma filter which reflects back energy having a wavelength which is above the band gap and which is ineffectively filtered by the interference filter, through the P/N junction to the source of radiation thereby avoiding parasitic absorption of the unusable portion of the thermal radiation energy.

Baldasaro, Paul F.

1997-12-01T23:59:59.000Z

174

Electra-optical device including a nitrogen containing electrolyte  

SciTech Connect

Described is a thin-film battery, especially a thin-film microbattery, and a method for making same having application as a backup or primary integrated power source for electronic devices. The battery includes a novel electrolyte which is electrochemically stable and does not react with the lithium anode and a novel vanadium oxide cathode Configured as a microbattery, the battery can be fabricated directly onto a semiconductor chip, onto the semiconductor die or onto any portion of the chip carrier. The battery can be fabricated to any specified size or shape to meet the requirements of a particular application. The battery is fabricated of solid state materials and is capable of operation between -15.degree. C. and 150.degree. C.

Bates, John B. (Oak Ridge, TN); Dudney, Nancy J. (Knoxville, TN); Gruzalski, Greg R. (Oak Ridge, TN); Luck, Christopher F. (Knoxville, TN)

1995-01-01T23:59:59.000Z

175

Extractant composition including crown ether and calixarene extractants  

SciTech Connect

An extractant composition comprising a mixed extractant solvent consisting of calix[4] arene-bis-(tert-octylbenzo)-crown-6 ("BOBCalixC6"), 4',4',(5')-di-(t-butyldicyclo-hexano)-18-crown-6 ("DtBu18C6"), and at least one modifier dissolved in a diluent. The DtBu18C6 may be present at from approximately 0.01M to approximately 0.4M, such as at from approximately 0.086 M to approximately 0.108 M. The modifier may be 1-(2,2,3,3-tetrafluoropropoxy)-3-(4-sec-butylphenoxy)-2-propanol ("Cs-7SB") and may be present at from approximately 0.01M to approximately 0.8M. In one embodiment, the mixed extractant solvent includes approximately 0.15M DtBu18C6, approximately 0.007M BOBCalixC6, and approximately 0.75M Cs-7SB modifier dissolved in an isoparaffinic hydrocarbon diluent. The extractant composition further comprises an aqueous phase. The mixed extractant solvent may be used to remove cesium and strontium from the aqueous phase.

Meikrantz, David H. (Idaho Falls, ID); Todd, Terry A. (Aberdeen, ID); Riddle, Catherine L. (Idaho Falls, ID); Law, Jack D. (Pocalello, ID); Peterman, Dean R. (Idaho Falls, ID); Mincher, Bruce J. (Idaho Falls, ID); McGrath, Christopher A. (Blackfoot, ID); Baker, John D. (Blackfoot, ID)

2009-04-28T23:59:59.000Z

176

cDNA encoding a polypeptide including a hevein sequence  

DOE Patents (OSTI)

A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74--79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli. 12 figs.

Raikhel, N.V.; Broekaert, W.F.; Chua, N.H.; Kush, A.

1999-05-04T23:59:59.000Z

177

CDNA encoding a polypeptide including a hevein sequence  

DOE Patents (OSTI)

A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74-79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli.

Raikhel, Natasha V. (Okemos, MI); Broekaert, Willem F. (Dilbeek, BE); Chua, Nam-Hai (Scarsdale, NY); Kush, Anil (New York, NY)

1995-03-21T23:59:59.000Z

178

cDNA encoding a polypeptide including a hevein sequence  

DOE Patents (OSTI)

A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74-79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli.

Raikhel, Natasha V. (Okemos, MI); Broekaert, Willem F. (Dilbeek, BE); Chua, Nam-Hai (Scarsdale, NY); Kush, Anil (New York, NY)

1999-05-04T23:59:59.000Z

179

cDNA encoding a polypeptide including a hevein sequence  

DOE Patents (OSTI)

A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1,018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74--79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli. 11 figures.

Raikhel, N.V.; Broekaert, W.F.; Chua, N.H.; Kush, A.

1995-03-21T23:59:59.000Z

180

Analysis of 70 Ophiuchi AB including seismic constraints  

E-Print Network (OSTI)

The analysis of solar-like oscillations for stars belonging to a binary system provides a unique opportunity to probe the internal stellar structure and to test our knowledge of stellar physics. Such oscillations have been recently observed and characterized for the A component of the 70 Ophiuchi system. A model of 70 Ophiuchi AB that correctly reproduces all observational constraints available for both stars is determined. An age of 6.2 +- 1.0 Gyr is found with an initial helium mass fraction Y_i=0.266 +- 0.015 and an initial metallicity (Z/X)_i=0.0300 +- 0.0025 when atomic diffusion is included and a solar value of the mixing-length parameter assumed. A precise and independent determination of the value of the mixing-length parameter needed to model 70 Oph A requires accurate measurement of the mean small separation, which is not available yet. Current asteroseismic observations, however, suggest that the value of the mixing-length parameter of 70 Oph A is lower or equal to the solar calibrated value. The e...

Eggenberger, P; Carrier, F; Fernandes, J; Santos, N C

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Analysis of alpha Centauri AB including seismic constraints  

E-Print Network (OSTI)

Detailed models of alpha Cen A and B based on new seismological data for alpha Cen B by Carrier & Bourban (2003) have been computed using the Geneva evolution code including atomic diffusion. Taking into account the numerous observational constraints now available for the alpha Cen system, we find a stellar model which is in good agreement with the astrometric, photometric, spectroscopic and asteroseismic data. The global parameters of the alpha Cen system are now firmly constrained to an age of t=6.52+-0.30 Gyr, an initial helium mass fraction Y_i=0.275+-0.010 and an initial metallicity (Z/X)_i=0.0434+-0.0020. Thanks to these numerous observational constraints, we confirm that the mixing-length parameter alpha of the B component is larger than the one of the A component, as already suggested by many authors (Noels et al. 1991, Fernandes & Neuforge 1995 and Guenther & Demarque 2000): alpha_B is about 8% larger than alpha_A (alpha_A=1.83+-0.10 and alpha_B=1.97+-0.10). Moreover, we show that asteroseismic measurements enable to determine the radii of both stars with a very high precision (errors smaller than 0.3%). The radii deduced from seismological data are compatible with the new interferometric results of Kervella et al. (2003) even if they are slightly larger than the interferometric radii (differences smaller than 1%).

P. Eggenberger; C. Charbonnel; S. Talon; G. Meynet; A. Maeder; F. Carrier; G. Bourban

2004-01-29T23:59:59.000Z

182

Analysis of 70 Ophiuchi AB including seismic constraints  

E-Print Network (OSTI)

The analysis of solar-like oscillations for stars belonging to a binary system provides a unique opportunity to probe the internal stellar structure and to test our knowledge of stellar physics. Such oscillations have been recently observed and characterized for the A component of the 70 Ophiuchi system. A model of 70 Ophiuchi AB that correctly reproduces all observational constraints available for both stars is determined. An age of 6.2 +- 1.0 Gyr is found with an initial helium mass fraction Y_i=0.266 +- 0.015 and an initial metallicity (Z/X)_i=0.0300 +- 0.0025 when atomic diffusion is included and a solar value of the mixing-length parameter assumed. A precise and independent determination of the value of the mixing-length parameter needed to model 70 Oph A requires accurate measurement of the mean small separation, which is not available yet. Current asteroseismic observations, however, suggest that the value of the mixing-length parameter of 70 Oph A is lower or equal to the solar calibrated value. The effects of atomic diffusion and of the choice of the adopted solar mixture were also studied. We also tested and compared the theoretical tools used for the modeling of stars for which p-modes frequencies are detected by performing this analysis with three different stellar evolution codes and two different calibration methods. We found that the different evolution codes and calibration methods we used led to perfectly coherent results.

P. Eggenberger; A. Miglio; F. Carrier; J. Fernandes; N. C. Santos

2008-02-25T23:59:59.000Z

183

Interim performance criteria for photovoltaic energy systems. [Glossary included  

DOE Green Energy (OSTI)

This document is a response to the Photovoltaic Research, Development, and Demonstration Act of 1978 (P.L. 95-590) which required the generation of performance criteria for photovoltaic energy systems. Since the document is evolutionary and will be updated, the term interim is used. More than 50 experts in the photovoltaic field have contributed in the writing and review of the 179 performance criteria listed in this document. The performance criteria address characteristics of present-day photovoltaic systems that are of interest to manufacturers, government agencies, purchasers, and all others interested in various aspects of photovoltaic system performance and safety. The performance criteria apply to the system as a whole and to its possible subsystems: array, power conditioning, monitor and control, storage, cabling, and power distribution. They are further categorized according to the following performance attributes: electrical, thermal, mechanical/structural, safety, durability/reliability, installation/operation/maintenance, and building/site. Each criterion contains a statement of expected performance (nonprescriptive), a method of evaluation, and a commentary with further information or justification. Over 50 references for background information are also given. A glossary with definitions relevant to photovoltaic systems and a section on test methods are presented in the appendices. Twenty test methods are included to measure performance characteristics of the subsystem elements. These test methods and other parts of the document will be expanded or revised as future experience and needs dictate.

DeBlasio, R.; Forman, S.; Hogan, S.; Nuss, G.; Post, H.; Ross, R.; Schafft, H.

1980-12-01T23:59:59.000Z

184

Economics of Condensing Gas Furnaces and Water Heaters Potential in Residential Single Family Homes  

E-Print Network (OSTI)

market research on solar water heaters. National Renewablespace heaters, and solar water heaters, as well as other

Lekov, Alex

2011-01-01T23:59:59.000Z

185

Building America Top Innovations 2013 Profile … Zero Energy-Ready Single-Family Homes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

to purchase and install. to purchase and install. Much of Building America's research is aimed directly at the goal of constructing high-performance homes and many of the Building America research teams have been directly involved with builders who are constructing zero energy or zero energy-ready homes. Here are just a few examples. The Consortium for Advanced Residential Buildings, operated by Steven Winter Associates, worked with Preferred Builders, Inc., on a high-performance test home in Old Greenwich, CT. Technologies and strategies used in the "Performance House" were not cutting-edge, but simply "best practices practiced." Closed-cell spray foam insulated the unvented attic and the interior of the foundation wall and wrapped the underside and sides of the slab while 1.5 inches of rigid foam sheathing covered the

186

Icon + expectation : exploring the evolution of the American single family home  

E-Print Network (OSTI)

To propose a new conceptualization of "home", it is necessary to explore the mechanisms that have created this revered icon. Since the industrial revolution, the commercial packaging of the home has continually reinforced ...

Wilcox, Michael E. (Michael Eaves), 1975-

2000-01-01T23:59:59.000Z

187

Experimental Evaluation of Ventilation Systems in a Single-Family Dwelling  

E-Print Network (OSTI)

The French regulation on residential building ventilation relies on an overall and continuous air renewal. The fresh air should enter the building through the "habitable rooms" while the polluted air is extracted in the service rooms. In this way, internal air is drained from the lowest polluted rooms to the highest polluted ones. However, internal pressure equilibrium and air movements in buildings result from the combined effects ventilation system and parameters such as wind, temperature difference or doors opening. This paper aims to analyse the influence of these parameters on pollutant transfer within buildings. In so doing, experiments are carried out using tracer gas release for representing pollution sources in an experimental house. Mechanical exhaust, balanced and natural ventilation systems are thus tested. Results show the followings: - For all cases, internal doors' opening causes the most important pollutant spread. - When doors are closed, the best performances are obtained with balanced venti...

Koffi, Juslin; Akoua, Jean-Jacques

2010-01-01T23:59:59.000Z

188

Analysis of advanced conceptual designs for single-family-sized absorption chillers. Annual report  

DOE Green Energy (OSTI)

The objectives of the research reported is to develop and analyze new concepts for absorption cycles to improve the performance or reduce the cost of a 3-ton absorption chiller that can be used with solar collected heat. New refrigerant-absorbent pairs are investigated, as are additives to currently used refrigerant-absorbent pairs. Results are given of a literature search on those topics. An initial screening is reported to check the values of the heats of mixing of candidate refrigerants and adsorbents, and also to screen several candidate absorbents against water as a refrigerant. A modified apparatus and procedures for measurement of refrigerant-absorbent solubilities are described. Pressure-temperature-composition data for the R-22/E-181 pair were measured. Based on theory and the information found in the literature, a set of criteria and guidelines was developed that gives the desirable properties of the refrigerants, absorbents, and pairs. (LEW)

Not Available

1978-09-27T23:59:59.000Z

189

Wind-induced Ground-surface Pressures Around a Single-Family House  

E-Print Network (OSTI)

numerical simulation value minus wind tunnel value, equationfor publication in The Journal of Wind Engineering andIndustrial Aerodynamics Wind-Induced Ground-Surface

Riley, W.J.

2008-01-01T23:59:59.000Z

190

Residential building design : comprehensive comparative guidelines for building single-family dwellings in Hawaii  

E-Print Network (OSTI)

Energy shortages, earthquakes, and hurricanes are environmental factors that challenge the home designers of Hawaii. The depletion of renewable natural resources and global warming trends foreshadow energy shortage and the ...

Nagata, Rochelle Morie

1997-01-01T23:59:59.000Z

191

Economics of Condensing Gas Furnaces and Water Heaters Potential in Residential Single Family Homes  

E-Print Network (OSTI)

seds.html. USDOE. 2009. Residential Energy ConsumptionUSEPA) 2008. Energy Star Residential Water Heaters: FinalExperiences of residential consumers and utilities. Oak

Lekov, Alex

2011-01-01T23:59:59.000Z

192

Appropriate Conservation Measures for Single-Family Buildings in Hot, Humid Climates  

E-Print Network (OSTI)

The effectiveness of a number of energy conservation measures for homes located in hot, humid climates was analyzed using the DOE-2.1B building simulation model. Measures having the greatest benefits to the homeowner are predicted to be the addition of ceiling insulation only if the house is not already insulated, weatherization, and reduction of the wall outer surface solar absorptance. The weatherization and solar absorptance reduction measures should be do-it-yourself installations to be cost-effective Replacement of an air-conditioning unit with a new high-efficiency unit was very effective in reducing peak demand and annual cooling energy. Unless the energy efficiency ratio of the existing unit is low (< 6), replacement is generally not cost-effective. The measures were predicted to result in slightly increased indoor humidities, but their effect on human comfort was predicted to be small. However, this conclusion should be considered preliminary since the simulation models used for these predictions have limitations. The amount of energy that can be saved by these measures is very dependent on the occupant's lifestyle, such as the degree to which the occupants will alter clothing to achieve comfort.

McLain, H. A.; MacDonald, J. M.; Goldenberg, D.

1985-01-01T23:59:59.000Z

193

Micro-level return and volatility drivers in Boston's single family home market  

E-Print Network (OSTI)

Developers and investors commonly target neighborhoods close to the urban core and with low median incomes as potential growth markets. Investments in these areas however are often perceived by private sector capital as ...

Valenta, Jay, 1969-

2003-01-01T23:59:59.000Z

194

Managing the Drivers of Air Flow and Water Vapor Transport in Existing Single Family Homes (Revised)  

SciTech Connect

This document focuses on managing the driving forces which move air and moisture across the building envelope. While other previously published Measure Guidelines focus on elimination of air pathways, the ultimate goal of this Measure Guideline is to manage drivers which cause air flow and water vapor transport across the building envelope (and also within the home), control air infiltration, keep relative humidity (RH) within acceptable limits, avoid combustion safety problems, improve occupant comfort, and reduce house energy use.

Cummings, J.; Withers, C.; Martin, E.; Moyer, N.

2012-10-01T23:59:59.000Z

195

Wind-induced Ground-surface Pressures Around a Single-Family House  

SciTech Connect

Wind induces a ground-surface pressure field around a building that can substantially affect the flow of soil gas and thereby the entry of radon and other soil-gas contaminants into the building. To quantify the effect of the wind-induced groundsurface pressure field on contaminant entry rates, the mean ground-surface pressure field was experimentally measured in a wind tunnel for several incidence angles of the wind, two atmospheric boundary layers, and two house geometries. The experimentally measured ground-surface pressure fields are compared with those predicted by a k-e turbulence model. Despite the fundamental limitations in applying a k-e model to a system with flow separation, predictions from the numerical simulations were good for the two wind incidence angles tested.

Riley, W.J.; Gadgil, A.J.; Nazaroff, W.W.

1996-02-01T23:59:59.000Z

196

Development of an ASHRAE 152-2004 Duct Model for the Single-Family Residential House  

E-Print Network (OSTI)

This paper presents the results of the development of the duct model based on ASHRAE standard 152-2004 (ASHRAE, 2004) using the DOE-2.1e building energy simulation program. To accomplish this, FUNCTION commands for DOE-2 were used to develop the duct model and provide the improved predictions of the duct heat loss or gain from the unconditioned space as well as supply or return duct leakage. After applying the duct model to the DOE-2 base-case simulation model, simulation results were compared with the measurement from the case-study house for verification.

Kim, S.; Haberl, J.

2008-12-01T23:59:59.000Z

197

Hot Water Draw Patterns in Single-Family Houses: Findings from Field Studies  

E-Print Network (OSTI)

water also is used by dishwashers and clothes washers. Hotand water efficient dishwashers and clothes washers. Thepeople clotheswasher dishwasher showers city state bathubs

Lutz, Jim

2012-01-01T23:59:59.000Z

198

Qualification test procedures and results for Honeywell solar collector subsystem, single-family residence  

DOE Green Energy (OSTI)

The test procedures and results are described in qualifying the Honeywell solar collector subsystem. Testing began in mid-August 1976, and was concluded in late February 1977. Testing was done in the following areas: pressure, service loads, hail, solar degradation, pollutants, thermal degradation, and outgassing. Results from these tests are summarized.

Not Available

1977-02-01T23:59:59.000Z

199

Damn the city, dam the suburbs : redefining the single family home  

E-Print Network (OSTI)

Today, we no longer realize public perception of home ownership in the United States is primarily shaped by government sponsored programs. In the 1940's, however, it was these programs that created a change in the options ...

Desmond, Marissa Grace

2010-01-01T23:59:59.000Z

200

Heating energy measurements of unoccupied single-family houses with attics containing radiant barriers  

Science Conference Proceedings (OSTI)

Tests were conducted by Oak Ridge National Laboratory (ORNL) to determine the magnitude of the heating energy savings achieved by installing attic radiant barriers. The radiant barriers used for the test consist of a material with two reflective aluminum surfaces on a kraft paper base. The experiment was conducted in three unoccupied research houses operated by ORNL. Two variations in the installation of radiant barriers were studied. One house was used as the control house (no barrier was installed), while the other two were used to test the two methods for installing the radiant barriers. In one house, the radiant barrier was laid on top of the attic fiberglass batt insulation, and in the other house, the barrier was attached to the underside of the roof trusses. The attics of all three houses were insulated with a kraft-paper-faced R-19 fiberglass batt insulation. The winter test with the radiant barrier showed that the horizontal barrier was able to save space-heating electical energy in both the resistance and heat pump modes amounting to 10.1% and 8.5%, respectively. The roof truss radiant barrier increased consumption by 2.6% in the resistance mode and 4.0% in the heat pump mode. The horizontal orientation of the radiant barrier is the more energy-effective method of installation.

Levins, W.P.; Karnitz, M.A.

1987-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Energy measurements of single-family houses with attics containing radiant barriers  

Science Conference Proceedings (OSTI)

Radiant barriers were tested in attics of three unoccupied research houses which are located near Knoxville, Tennessee. The prime purpose of the testing was to determine the interaction, if any, between two types of radiant barriers, horizontal (barrier laid on top of attic insulation) and truss (barrier attached to underside of roof trusses), and three levels of fiberglass-batt attic insulation, R-11, R-19, and R-30. Testing of radiant barriers with R-19 fiberglass-batt attic insulation was done at the houses in the summer of 1985 and in the winter of 1985-86. The R-11 and R-30 testing was done in the summer of 1986. These results showed that horizontal barriers were more effective than truss barriers in reducing house cooling and heating loads. The summer of 1986 testing showed that increasing the attic insulation from R-11 to R-30 reduced the house cooling load (Btu) by approximately 16%. Adding a horizontal barrier to R-11 also reduced the cooling load compared to R-11 with no barrier by about 16%, while a truss barrier reduced it by 11%. A horizontal barrier with R-30 only reduced the cooling load by 2% compared to R-30 with no barrier, while an increase in the cooling load of 0.7% was measured with a truss barrier and R-30. Radiant barriers were not effective in reducing house cooling loads when R-30 attic insulation was present. The results from the summer of 1985 were integrated into the latest work through the use of a modeling effort using the building load simulation program, DOE-2.1B. This showed that R-19 insulation in conjunction with a horizontal barrier was (for Knoxville) the most effective barrier/insulation combination and could reduce the house cooling load by 25.1% compared to R-11 with no barrier.

Levins, W.P.; Karnitz, M.A.

1987-01-01T23:59:59.000Z

202

Building America Top Innovations 2013 Profile … Zero Energy-Ready Single-Family Homes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

for purchase and installation. for purchase and installation. Building America's research is aimed at the goal of constructing high- performance homes and many of the Building America research teams have worked directly with builders to construct zero energy or zero energy-ready homes. Here are just a few examples. The Consortium for Advanced Residential Buildings, operated by Steven Winter Associates, worked with Preferred Builders, Inc., on a high-performance test home in Old Greenwich, CT. Technologies and strategies used in the "Performance House" were not cutting-edge, but simply "best practices practiced." Closed-cell spray foam insulated the unvented attic and the interior of the foundation wall and wrapped the underside and sides of the slab while 1.5 inches of rigid foam sheathing covered the

203

Passive-solar-heating project for a single-family residence. Final report  

DOE Green Energy (OSTI)

This project was a passive home heating system utilizing solar collectors that are part of the roof structure of a 15' x 30' greenhouse. The design utilized solar air collectors constructed on site that are actually part of the roof of the greenhouse. The flow of air is from the storage to the collectors then back to the storage. The storage bin consists of a 5' x 19' concrete insulated bin built into the floor of the greenhouse. The storage mass was gallon plastic jugs. The plastic jugs did not work properly, so they are being replaced by salt rods. This replacement will be an after the fact project by the owner. The concrete storage bin was insulated with 2'' plastic foam insulation, applied to the 8'' concrete wall. The ducts entering and leaving the storage bin have low voltage (12 volt) electric dampers. A cross flow system was used. The heated air circulates from the collectors to storage via ducts in the walls of the lean-to design. The removal of heat from the storage bin was from end to end via the ducts to the central air system for the house. In addition, the greenhouse is connected to the house with a doorway that can be opened to circulate air into the house, a shuttled exhaust fan 1/3H.P. motor has aided in the circulation of air from the storage bin to the collectors and back.

Starkey, V.J.

1982-05-01T23:59:59.000Z

204

Community Assessment Tool for Public Health Emergencies Including Pandemic Influenza  

SciTech Connect

The Community Assessment Tool (CAT) for Public Health Emergencies Including Pandemic Influenza (hereafter referred to as the CAT) was developed as a result of feedback received from several communities. These communities participated in workshops focused on influenza pandemic planning and response. The 2008 through 2011 workshops were sponsored by the Centers for Disease Control and Prevention (CDC). Feedback during those workshops indicated the need for a tool that a community can use to assess its readiness for a disaster—readiness from a total healthcare perspective, not just hospitals, but the whole healthcare system. The CAT intends to do just that—help strengthen existing preparedness plans by allowing the healthcare system and other agencies to work together during an influenza pandemic. It helps reveal each core agency partners' (sectors) capabilities and resources, and highlights cases of the same vendors being used for resource supplies (e.g., personal protective equipment [PPE] and oxygen) by the partners (e.g., public health departments, clinics, or hospitals). The CAT also addresses gaps in the community's capabilities or potential shortages in resources. While the purpose of the CAT is to further prepare the community for an influenza pandemic, its framework is an extension of the traditional all-hazards approach to planning and preparedness. As such, the information gathered by the tool is useful in preparation for most widespread public health emergencies. This tool is primarily intended for use by those involved in healthcare emergency preparedness (e.g., community planners, community disaster preparedness coordinators, 9-1-1 directors, hospital emergency preparedness coordinators). It is divided into sections based on the core agency partners, which may be involved in the community's influenza pandemic influenza response.

HCTT-CHE

2011-04-14T23:59:59.000Z

205

Community Assessment Tool for Public Health Emergencies Including Pandemic Influenza  

SciTech Connect

The Community Assessment Tool (CAT) for Public Health Emergencies Including Pandemic Influenza (hereafter referred to as the CAT) was developed as a result of feedback received from several communities. These communities participated in workshops focused on influenza pandemic planning and response. The 2008 through 2011 workshops were sponsored by the Centers for Disease Control and Prevention (CDC). Feedback during those workshops indicated the need for a tool that a community can use to assess its readiness for a disaster—readiness from a total healthcare perspective, not just hospitals, but the whole healthcare system. The CAT intends to do just that—help strengthen existing preparedness plans by allowing the healthcare system and other agencies to work together during an influenza pandemic. It helps reveal each core agency partners' (sectors) capabilities and resources, and highlights cases of the same vendors being used for resource supplies (e.g., personal protective equipment [PPE] and oxygen) by the partners (e.g., public health departments, clinics, or hospitals). The CAT also addresses gaps in the community's capabilities or potential shortages in resources. While the purpose of the CAT is to further prepare the community for an influenza pandemic, its framework is an extension of the traditional all-hazards approach to planning and preparedness. As such, the information gathered by the tool is useful in preparation for most widespread public health emergencies. This tool is primarily intended for use by those involved in healthcare emergency preparedness (e.g., community planners, community disaster preparedness coordinators, 9-1-1 directors, hospital emergency preparedness coordinators). It is divided into sections based on the core agency partners, which may be involved in the community's influenza pandemic influenza response.

HCTT-CHE

2011-04-14T23:59:59.000Z

206

Executive Compensation in America: Optimal Contracting or Extraction of Rents?  

E-Print Network (OSTI)

Eli Ofek and David Yermack, Taking Stock: Does Equity-BasedEli Ofek and David Yermack, Taking Stock: Does Equity-BasedEli Ofek and David Yermack, Taking Stock: Does Equity-Based

Bebchuk, Lucian Arye; Fried, Jesse M.; Walker, David I.

2001-01-01T23:59:59.000Z

207

On capturing oil rents with a national excise tax  

E-Print Network (OSTI)

total amount S of oil i n the ground which can be costlessly extracted at any time, then, as is well

Bergstrom, Ted

1982-01-01T23:59:59.000Z

208

On Capturing Oil Rents with a National Excise Tax  

E-Print Network (OSTI)

total amount S of oil i n the ground which can be costlessly extracted at any time, then, as is well

Bergstrom, Ted

1982-01-01T23:59:59.000Z

209

Energy savings for heat-island reduction strategies in Chicago and Houston (including updates for Baton Rouge, Sacramento, and Salt Lake City)  

SciTech Connect

In 1997, the U.S. Environmental Protection Agency (EPA) established the ''Heat Island Reduction Initiative'' to quantify the potential benefits of Heat-Island Reduction (HIR) strategies (i.e., shade trees, reflective roofs, reflective pavements and urban vegetation) to reduce cooling-energy use in buildings, lower the ambient air temperature and improve urban air quality in cities, and reduce CO2 emissions from power plants. Under this initiative, the Urban Heat Island Pilot Project (UHIPP) was created with the objective of investigating the potential of HIR strategies in residential and commercial buildings in three initial UHIPP cities: Baton Rouge, LA; Sacramento, CA; and Salt Lake City, UT. Later two other cities, Chicago, IL and Houston, TX were added to the UHIPP. In an earlier report we summarized our efforts to calculate the annual energy savings, peak power avoidance, and annual CO2 reduction obtainable from the introduction of HIR strategies in the initial three cities. This report summarizes the results of our study for Chicago and Houston. In this analysis, we focused on three building types that offer the highest potential savings: single-family residence, office and retail store. Each building type was characterized in detail by vintage and system type (i.e., old and new building constructions, and gas and electric heat). We used the prototypical building characteristics developed earlier for each building type and simulated the impact of HIR strategies on building cooling- and heating-energy use and peak power demand using the DOE-2.1E model. Our simulations included the impact of (1) strategically-placed shade trees near buildings [direct effect], (2) use of high-albedo roofing material on the building [direct effect], (3) urban reforestation with high-albedo pavements and building surfaces [indirect effect] and (4) combined strategies 1, 2, and 3 [direct and indirect effects]. We then estimated the total roof area of air-conditioned buildings in each city using readily obtainable data to calculate the metropolitan-wide impact of HIR strategies. The results show that in Chicago, potential annual energy savings of $30M could be realized by ratepayers from the combined direct and indirect effects of HIR strategies. Additionally, peak power avoidance is estimated at 400 MW and the reduction in annual carbon emissions at 58 ktC. In Houston, the potential annual energy savings are estimated at $82M, with an avoidance of 730 MW in peak power and a reduction in annual carbon emissions of 170 ktC.

Konopacki, S.; Akbari, H.

2002-02-28T23:59:59.000Z

210

Energy savings for heat-island reduction strategies in Chicago and Houston (including updates for Baton Rouge, Sacramento, and Salt Lake City)  

SciTech Connect

In 1997, the U.S. Environmental Protection Agency (EPA) established the ''Heat Island Reduction Initiative'' to quantify the potential benefits of Heat-Island Reduction (HIR) strategies (i.e., shade trees, reflective roofs, reflective pavements and urban vegetation) to reduce cooling-energy use in buildings, lower the ambient air temperature and improve urban air quality in cities, and reduce CO2 emissions from power plants. Under this initiative, the Urban Heat Island Pilot Project (UHIPP) was created with the objective of investigating the potential of HIR strategies in residential and commercial buildings in three initial UHIPP cities: Baton Rouge, LA; Sacramento, CA; and Salt Lake City, UT. Later two other cities, Chicago, IL and Houston, TX were added to the UHIPP. In an earlier report we summarized our efforts to calculate the annual energy savings, peak power avoidance, and annual CO2 reduction obtainable from the introduction of HIR strategies in the initial three cities. This report summarizes the results of our study for Chicago and Houston. In this analysis, we focused on three building types that offer the highest potential savings: single-family residence, office and retail store. Each building type was characterized in detail by vintage and system type (i.e., old and new building constructions, and gas and electric heat). We used the prototypical building characteristics developed earlier for each building type and simulated the impact of HIR strategies on building cooling- and heating-energy use and peak power demand using the DOE-2.1E model. Our simulations included the impact of (1) strategically-placed shade trees near buildings [direct effect], (2) use of high-albedo roofing material on the building [direct effect], (3) urban reforestation with high-albedo pavements and building surfaces [indirect effect] and (4) combined strategies 1, 2, and 3 [direct and indirect effects]. We then estimated the total roof area of air-conditioned buildings in each city using readily obtainable data to calculate the metropolitan-wide impact of HIR strategies. The results show that in Chicago, potential annual energy savings of $30M could be realized by ratepayers from the combined direct and indirect effects of HIR strategies. Additionally, peak power avoidance is estimated at 400 MW and the reduction in annual carbon emissions at 58 ktC. In Houston, the potential annual energy savings are estimated at $82M, with an avoidance of 730 MW in peak power and a reduction in annual carbon emissions of 170 ktC.

Konopacki, S.; Akbari, H.

2002-02-28T23:59:59.000Z

211

An Analysis of Near-Term Hydrogen Vehicle Rollout Scenarios for Southern California  

E-Print Network (OSTI)

costs for compressed gas stations include rent for land,Costs for Compressed Gas Stations. OPERATION AND MAINTENANCEPortable Refueler Stations (Compressed Gas Truck Delivery)

Nicholas, Michael A; Ogden, J

2010-01-01T23:59:59.000Z

212

ARM: Surface Radiation Measurement Quality Control testing, including climatologically configurable limits  

DOE Data Explorer (OSTI)

Surface Radiation Measurement Quality Control testing, including climatologically configurable limits

Gary Hodges; Tom Stoffel; Mark Kutchenreiter; Bev Kay; Aron Habte; Michael Ritsche; Victor Morris; Mary Anderberg

213

DOE Order 440. 1 B: Worker Protection Program for DOE (Including...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0. 1 B: Worker Protection Program for DOE (Including NNSA) Federal Employees DOE Order 440. 1 B: Worker Protection Program for DOE (Including NNSA) Federal Employees Stakeholders:...

214

Composite materials and bodies including silicon carbide and titanium diboride and methods of forming same  

DOE Patents (OSTI)

Methods of forming composite materials include coating particles of titanium dioxide with a substance including boron (e.g., boron carbide) and a substance including carbon, and reacting the titanium dioxide with the substance including boron and the substance including carbon to form titanium diboride. The methods may be used to form ceramic composite bodies and materials, such as, for example, a ceramic composite body or material including silicon carbide and titanium diboride. Such bodies and materials may be used as armor bodies and armor materials. Such methods may include forming a green body and sintering the green body to a desirable final density. Green bodies formed in accordance with such methods may include particles comprising titanium dioxide and a coating at least partially covering exterior surfaces thereof, the coating comprising a substance including boron (e.g., boron carbide) and a substance including carbon.

Lillo, Thomas M.; Chu, Henry S.; Harrison, William M.; Bailey, Derek

2013-01-22T23:59:59.000Z

215

DOT Motor-fuel use statistics summary to 1995 The data included...  

Open Energy Info (EERE)

Motor-fuel use statistics summary to 1995 The data included in this submission is United States Department of Transportation (DOT) data up to 1995. The data includes motor-fuel...

216

char_household2001.pdf  

U.S. Energy Information Administration (EIA) Indexed Site

6a. Household Characteristics by Type of Rented Housing Unit, 6a. Household Characteristics by Type of Rented Housing Unit, Million U.S. Households, 2001 Household Characteristics RSE Column Factor: Total Rented Units Type of Rented Housing Unit RSE Row Factors Single-Family Apartments in Buildings With Mobile Home Two to Four Units Five or More Units 0.5 0.8 1.1 0.9 2.5 Total Rented Units ........................ 34.3 10.5 7.4 15.2 1.1 6.9 Household Size 1 Person ....................................... 12.3 2.5 2.6 7.0 0.3 10.0 2 Persons ...................................... 9.2 2.5 2.5 4.1 Q 11.8 3 Persons ...................................... 5.4 2.0 1.1 2.0 0.4 13.9 4 Persons ...................................... 3.8 1.6 0.7 1.4 Q 17.7 5 Persons ...................................... 2.0 0.9 0.4 0.6 Q 24.1 6 or More Persons ........................

217

Molecular Dynamics Model of Ultraviolet Matrix-Assisted Laser Desorption/Ionization Including Ionization Processes  

E-Print Network (OSTI)

Molecular Dynamics Model of Ultraviolet Matrix-Assisted Laser Desorption/Ionization Including A molecular dynamics model of UV-MALDI including ionization processes is presented. In addition/desorption of molecular systems, it includes radiative and nonradiative decay, exciton hopping, two pooling processes

Zhigilei, Leonid V.

218

Photovoltaic Device Including A Boron Doping Profile In An I-Type Layer  

DOE Patents (OSTI)

A photovoltaic cell for use in a single junction or multijunction photovoltaic device, which includes a p-type layer of a semiconductor compound including silicon, an i-type layer of an amorphous semiconductor compound including silicon, and an n-type layer of a semiconductor compound including silicon formed on the i-type layer. The i-type layer including an undoped first sublayer formed on the p-type layer, and a boron-doped second sublayer formed on the first sublayer.

Yang, Liyou (Lawrenceville, NJ)

1993-10-26T23:59:59.000Z

219

1996-2004 Trends in the Single-Family Housing Market: Spatial Analysis of the Residential Sector  

SciTech Connect

This report provides a detailed geographic analysis of two specific topics affecting the residential sector. First, we performed an analysis of new construction market trends using annual building permit data. We report summarized tables and national maps to help illustrate market conditions. Second, we performed a detailed geographic analysis of the housing finance market. We analyzed mortgage application data to provide citable statistics and detailed geographic summarization of the residential housing picture in the US for each year in the 1996-2004 period. The databases were linked to geographic information system tools to provide various map series detailing the results geographically. Looking at these results geographically may suggest potential new markets for TD programs addressing the residential sector that have not been considered previously. For example, we show which lenders affect which regions and which income or mortgage product classes. These results also highlight the issue of housing affordability. Energy efficiency R&D programs focused on developing new technology for the residential sector must be conscious of the costs of products resulting from research that will eventually impact the home owner or new home buyer. Results indicate that home values as a proportion of median family income in Building America communities are closely aligned with the national average of home value as a proportion of median income. Other key findings: • The share of home building and home buying activity continues to rise steadily in the Hot-Dry and Hot-Humid climate zones, while the Mixed-Humid and Cold climate zone shares continue to decline. Other zones remain relatively stable in terms of share of housing activity. • The proportion of home buyers having three times the median family income for their geography has been steadily increasing during the study period. • Growth in the Hispanic/Latino population and to a lesser degree in the Asian population has translated into proportional increases in share of home purchasing by both groups. White home buyers continue to decline as a proportion all home buyers. • Low interest rate climate resulted in lenders moving back to conventional financing, as opposed to government-backed financing, for cases that would be harder to financing in higher rate environments. Government loan products are one mechanism for affecting energy efficiency gains in the residential sector. • The rate environment and concurrent deregulation of the finance industry resulted unprecedented merger and acquisition activity among financial institutions during the study period. This study conducted a thorough accounting of this merger activity to inform the market share analysis provided. • The home finance industry quartiles feature 5 lenders making up the first quartile of home purchase loans, 18 lenders making up the second quartile, 111 lenders making up the third quartile, and the remaining nearly 8,000 lenders make up the fourth quartile.

Anderson, Dave M.; Elliott, Douglas B.

2006-09-05T23:59:59.000Z

220

Social marketing, financial, and regulatory mechanisms for adoption of water conservation and stormwater management practices by single-family households  

E-Print Network (OSTI)

Since the latter half of the nineteenth century, water delivery and stormwater removal have been managed largely by engineering staff at water utilities, municipal departments and multi-jurisdiction authorities. In recent ...

Youngerman, Zach (Zach Reuben)

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Capitalization of Transit Investments into Single-Family Home Prices: A Comparative Analysis of Five California Rail Transit Systems  

E-Print Network (OSTI)

of the VancouverAdvancedLight Rail Transit System on Single-Analysis of Five California Rail Transit Systems John Lanchsof Five California Rail Transit Systems John Landis Subhra

Landis, John; Guhathakurta, Subhrajit; Zhang, Ming

1994-01-01T23:59:59.000Z

222

Changes in single family housing prices due to the planning and construction of Interstate 476 in Pennsylvania  

E-Print Network (OSTI)

It has been suggested in various studies that increasing accessibility to a transportation network would influence local property values and their pattern of change over time. This thesis examines the capitalization into ...

Komiyama, Noriko, 1976-

2004-01-01T23:59:59.000Z

223

DOE Order 440. 1 B: Worker Protection Program for DOE (Including NNSA)  

NLE Websites -- All DOE Office Websites (Extended Search)

0. 1 B: Worker Protection Program for DOE (Including 0. 1 B: Worker Protection Program for DOE (Including NNSA) Federal Employees DOE Order 440. 1 B: Worker Protection Program for DOE (Including NNSA) Federal Employees Stakeholders: DOE and NNSA employees Scope: DOE Order 440.1 B establishes the framework for an effective worker protection program that will reduce or prevent injuries, illnesses, and accidental losses by providing Department of Energy, including National Nuclear Security Administration (NNSA), Federal workers with a safe and healthful workplace. Summary: Among the requirements of DOE Order 440.1 B, the Department must provide its employees, including NNSA, a number of protections relating to whistle blowing guidelines. The relevant section of requirements includes: 4. REQUIREMENTS. DOE elements must:

224

Photovoltaic module kit including connector assembly for non-penetrating array installation  

Science Conference Proceedings (OSTI)

A PV module kit for non-penetrating rooftop installation, including a plurality of PV modules and a plurality of connectors. Each of the PV modules includes a PV laminate and a frame forming a mounting region assembled thereto. The connectors include a male connector having a male fastener extending from a head, and a female connector having a female fastener assembled within a head. The heads are entirely formed of plastic. The kit provides a mounted array state including a junction at which the mounting region of at least two of the PV modules are aligned and interconnected by engagement of the male connector with the female connector. The so-formed junction is substantially electrically insulated. The plurality of connectors can further include a spacer connector including a head forming a bore sized to slidably receive the male fastener, with all of the connector heads being identical.

Botkin, Jonathan (El Cerrito, CA); Graves, Simon (Berkeley, CA); Danning, Matt (Oakland, CA); Culligan, Matthew (Berkeley, CA)

2011-11-22T23:59:59.000Z

225

Photovoltaic module kit including connector assembly for non-penetrating array installation  

DOE Patents (OSTI)

A PV module kit for non-penetrating rooftop installation, including a plurality of PV modules and a plurality of connectors. Each of the PV modules includes a PV laminate and a frame forming a mounting region assembled thereto. The connectors include a male connector having a male fastener extending from a head, and a female connector having a female fastener assembled within a head. The heads are entirely formed of plastic. The kit provides a mounted array state including a junction at which the mounting region of at least two of the PV modules are aligned and interconnected by engagement of the male connector with the female connector. The so-formed junction is substantially electrically insulated. The plurality of connectors can further include a spacer connector including a head forming a bore sized to slidably receive the male fastener, with all of the connector heads being identical.

Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

2012-10-23T23:59:59.000Z

226

NREL/Ventyx Utility Rates: What is included? | OpenEI Community  

Open Energy Info (EERE)

NREL/Ventyx Utility Rates: What is included? NREL/Ventyx Utility Rates: What is included? Home > Groups > Utility Rate Does anyone know what pieces of electric rates are included in the NREL/Ventyx database of rates by utility, i.e. is it supply only or does the file include supply, transmission & distribution costs? Thanks! Submitted by Vbugnion on 27 February, 2013 - 16:25 1 answer Points: 1 Hi Vbugnion, Just to clarify, you're not asking about the OpenEI utility rates, but rather the Ventyx rates found here: http://developer.nrel.gov/doc/api/georeserv/service/utility_rates If so, then the Ventyx rates do include all bundled rates (which includes supply, trans, and distr costs). However, there's a small but non-zero possibility that a few energy-only or delivery-only rates may not have been cleaned

227

Multi-objective design and optimization of district energy systems including polygeneration energy conversion technologies.  

E-Print Network (OSTI)

??In the present context of finding ways to decrease CO2 emissions linked with human activity, district energy systems including polygeneration energy conversion technologies are likely… (more)

Weber, Céline Isabelle

2008-01-01T23:59:59.000Z

228

Stocks of Crude Oil (Including SPR) - U.S. Energy Information ...  

U.S. Energy Information Administration (EIA)

-No Data Reported; --= Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Notes: Stocks include those ...

229

Petroleum Gasoline & Distillate Needs Including the Energy Independence and Security Act (EISA) Impacts  

Reports and Publications (EIA)

This presentation describes the projections for petroleum-based gasoline and distillate in the Update AEO 2008, which includes the impacts of the Energy Independence and Security Act.

Information Center

2008-03-11T23:59:59.000Z

230

ORISE: REAC/TS Symposium to include sessions on the Fukushima...  

NLE Websites -- All DOE Office Websites (Extended Search)

MEDIA ADVISORY: REACTS International Symposium to include sessions on the Fukushima crisis FOR IMMEDIATE RELEASE Aug. 31, 2011 FY11-42 Who: Radiation Emergency Assistance Center...

231

Comparative chloroplast genomics: Analyses including new sequences from the angiosperms Nuphar advena and Ranunculus macranthus  

E-Print Network (OSTI)

to other angiosperms. BMC Genomics 2006, 7:61. 20.history of chloroplast genomics. Photosynth Res 2003, 76:Comparative chloroplast genomics: Analyses including new

2007-01-01T23:59:59.000Z

232

For more information, please refer to: http://mobility.tamu.edu/mip/strategies.php. Description  

E-Print Network (OSTI)

employees, including subsidiaries for business and personal use. 4. An increased number of fuel efficient and alternate fuel cars are available in the Enterprise car fleet. 5. Vehicles rented for university business, Shaunavon, and Swift Current, an $8.00 per day surcharge will apply for all vehicles. Renting in Canada

233

T-603: Mac OS X Includes Some Invalid Comodo Certificates | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

03: Mac OS X Includes Some Invalid Comodo Certificates 03: Mac OS X Includes Some Invalid Comodo Certificates T-603: Mac OS X Includes Some Invalid Comodo Certificates April 15, 2011 - 1:46am Addthis PROBLEM: Mac OS X Includes Some Invalid Comodo Certificates PLATFORM: For Mac OS X Server v10.5.8, Mac OS X v10.5.8, Mac OS X v10.6.7 and Mac OS X Server v10.6.7 ABSTRACT: The operating system includes some invalid certificates. The vulnerability is due to the invalid certificates and not the operating system itself. Other browsers, applications, and operating systems are affected. reference LINKS: SecurityTracker Alert ID: 1025362 APPLE-SA-2011-04-14-4 Security Update 2011-002 Apple Support Downloads IMPACT ASSESSMENT: High Discussion: A partner of Comodo with Registration Authority capabilities suffered an internal security breach and the attacker caused seven certificates to be

234

Property:Number of Plants Included in Planned Estimate | Open Energy  

Open Energy Info (EERE)

Plants Included in Planned Estimate Plants Included in Planned Estimate Jump to: navigation, search Property Name Number of Plants Included in Planned Estimate Property Type String Description Number of plants included in the estimate of planned capacity per GEA Pages using the property "Number of Plants Included in Planned Estimate" Showing 21 pages using this property. A Alaska Geothermal Region + 3 + C Cascades Geothermal Region + 1 + Central Nevada Seismic Zone Geothermal Region + 4 + G Gulf of California Rift Zone Geothermal Region + 7 + H Hawaii Geothermal Region + 1 + Holocene Magmatic Geothermal Region + 4 + I Idaho Batholith Geothermal Region + 1 + N Northern Basin and Range Geothermal Region + 9 + Northern Rockies Geothermal Region + 0 + Northwest Basin and Range Geothermal Region + 6 +

235

Systems including catalysts in porous zeolite materials within a reactor for use in synthesizing hydrocarbons  

Science Conference Proceedings (OSTI)

Catalytic structures include a catalytic material disposed within a zeolite material. The catalytic material may be capable of catalyzing a formation of methanol from carbon monoxide and/or carbon dioxide, and the zeolite material may be capable of catalyzing a formation of hydrocarbon molecules from methanol. The catalytic material may include copper and zinc oxide. The zeolite material may include a first plurality of pores substantially defined by a crystal structure of the zeolite material and a second plurality of pores dispersed throughout the zeolite material. Systems for synthesizing hydrocarbon molecules also include catalytic structures. Methods for synthesizing hydrocarbon molecules include contacting hydrogen and at least one of carbon monoxide and carbon dioxide with such catalytic structures. Catalytic structures are fabricated by forming a zeolite material at least partially around a template structure, removing the template structure, and introducing a catalytic material into the zeolite material.

Rolllins, Harry W. (Idaho Falls, ID); Petkovic, Lucia M. (Idaho Falls, ID); Ginosar, Daniel M. (Idaho Falls, ID)

2012-07-24T23:59:59.000Z

236

Systems and strippable coatings for decontaminating structures that include porous material  

SciTech Connect

Methods of removing contaminant matter from porous materials include applying a polymer material to a contaminated surface, irradiating the contaminated surface to cause redistribution of contaminant matter, and removing at least a portion of the polymer material from the surface. Systems for decontaminating a contaminated structure comprising porous material include a radiation device configured to emit electromagnetic radiation toward a surface of a structure, and at least one spray device configured to apply a capture material onto the surface of the structure. Polymer materials that can be used in such methods and systems include polyphosphazine-based polymer materials having polyphosphazine backbone segments and side chain groups that include selected functional groups. The selected functional groups may include iminos, oximes, carboxylates, sulfonates, .beta.-diketones, phosphine sulfides, phosphates, phosphites, phosphonates, phosphinates, phosphine oxides, monothio phosphinic acids, and dithio phosphinic acids.

Fox, Robert V. (Idaho Falls, ID); Avci, Recep (Bozeman, MT); Groenewold, Gary S. (Idaho Falls, ID)

2011-12-06T23:59:59.000Z

237

Energy Department Expands Gas Gouging Reporting System to Include 1-800  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Expands Gas Gouging Reporting System to Include Expands Gas Gouging Reporting System to Include 1-800 Number: 1-800-244-3301 Energy Department Expands Gas Gouging Reporting System to Include 1-800 Number: 1-800-244-3301 September 6, 2005 - 9:50am Addthis Washington, DC - Energy Secretary Samuel W. Bodman announced today that the Department of Energy has expanded its gas gouging reporting system to include a toll-free telephone hotline. The hotline is available to American consumers starting today. "While we've largely seen the best of American generosity and unity throughout the recovery effort, we recognize that there are some bad actors that may try to take advantage of the situation. Consumers are our first line of defense in guarding against gas price gouging. I can assure you, our Administration - from the President down - takes this issue very

238

RECOMMENDATIONS TO INCLUDE IN CALIFORNIA ENERGY COMMISSION'S 2009 INTEGRATED ENERGY POLICY REPORT (IEPR)  

E-Print Network (OSTI)

RECOMMENDATIONS TO INCLUDE IN CALIFORNIA ENERGY COMMISSION'S 2009 INTEGRATED ENERGY POLICY REPORT solutions. Overview Past Energy Commission Integrated Energy Policy Reports (IEPRs) have recognized (IEPR) Submitted By: Steven Weissman Associate Director Center for Law, Energy and the Environment

Kammen, Daniel M.

239

On a Three Step Model of Anaerobic Digestion Including the Hydrolysis of  

E-Print Network (OSTI)

On a Three Step Model of Anaerobic Digestion Including the Hydrolysis of Particulate Matter R degradation, chemostat, models, growth rate, equilibrium, bistability. 1. INTRODUCTION Anaerobic digestion, the anaerobic digestion is generally considered as a three step process: hydrolysis and liquefaction

Paris-Sud XI, Université de

240

Numerical simulation of ECRIPAC plasma behaviour with Vlasov equations including electron and ion collective effects  

E-Print Network (OSTI)

976 Numerical simulation of ECRIPAC plasma behaviour with Vlasov equations including electron of 4 MeV energy with very short pulses. (`ompared to ISlectron Ring Accelerators, ECRIPAC presents

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Automated solar collector installation design including ability to define heterogeneous design preferences  

DOE Patents (OSTI)

Embodiments may include systems and methods to create and edit a representation of a worksite, to create various data objects, to classify such objects as various types of pre-defined "features" with attendant properties and layout constraints. As part of or in addition to classification, an embodiment may include systems and methods to create, associate, and edit intrinsic and extrinsic properties to these objects. A design engine may apply of design rules to the features described above to generate one or more solar collectors installation design alternatives, including generation of on-screen and/or paper representations of the physical layout or arrangement of the one or more design alternatives. Embodiments may also include definition of one or more design apertures, each of which may correspond to boundaries in which solar collector layouts should comply with distinct sets of user-defined design preferences. Distinct apertures may provide heterogeneous regions of collector layout according to the user-defined design preferences.

Wayne, Gary; Frumkin, Alexander; Zaydman, Michael; Lehman, Scott; Brenner, Jules

2013-01-08T23:59:59.000Z

242

Code Thrust 1400 Aeronautical/Astronautical Engineering (including Aerodynamics, Aerospace Engineering, and Space Technology)  

E-Print Network (OSTI)

Sciences (including Clinical/Medical Laboratory Technologies, Communication Disorders Sciences and Services, Gerontology, Health and Medical Administrative Services, Other Health Professions and Related Services, Environmental health, Geotechnical, Hydraulic, Hydrologic, Sanitary, Structural, and Transportation) 1404

Alabama in Huntsville, University of

243

Light reflecting apparatus including a multi-aberration light reflecting surface  

DOE Patents (OSTI)

A light reflecting apparatus including a multi-aberration bendable light reflecting surface is disclosed herein. This apparatus includes a structural assembly comprised of a rectangular plate which is resiliently bendable, to a limited extent, and which has a front side defining the multi-aberration light reflecting surface and an opposite back side, and a plurality of straight leg members rigidly connected with the back side of the plate and extending rearwardly therefrom. The apparatus also includes a number of different adjustment mechanisms, each of which is connected with specific ones of the leg members. These mechanisms are adjustably movable in different ways for applying corresponding forces to the leg members in order to bend the rectangular plate and light reflecting surface into different predetermined curvatures and which specifically include quadratic and cubic curvatures corresponding to different optical aberrations.

Sawicki, Richard H. (Pleasanton, CA); Sweatt, William (Livermore, CA)

1987-01-01T23:59:59.000Z

244

Modification of the Köhler Equation to Include Soluble Trace Gases and Slightly Soluble Substances  

Science Conference Proceedings (OSTI)

A generalized reformulation of the Köhler theory to include the effect of soluble gases and slightly soluble aerosol substances is presented. A single equation is derived that takes into account 1) the Kelvin effect; 2) the Raoult effect caused ...

Ari Laaksonen; Pekka Korhonen; Markku Kulmala; Robert J. Charlson

1998-03-01T23:59:59.000Z

245

A New Bulk Microphysical Scheme That Includes Riming Intensity and Temperature-Dependent Ice Characteristics  

Science Conference Proceedings (OSTI)

A new bulk microphysical parameterization (BMP) scheme is presented that includes a diagnosed riming intensity and its impact on ice characteristics. As a result, the new scheme represents a continuous spectrum from pristine ice particles to ...

Yanluan Lin; Brian A. Colle

2011-03-01T23:59:59.000Z

246

Modeling and Controller Design of a Wind Energy Conversion System Including a Matrix Converter.  

E-Print Network (OSTI)

??In this thesis, a grid-connected wind-energy converter system including a matrix converter is proposed. The matrix converter, as a power electronic converter, is used to… (more)

Barakati, Seyed Masoud

2008-01-01T23:59:59.000Z

247

Including Surface Kinetic Effects in Simple Models of Ice Vapor Diffusion  

Science Conference Proceedings (OSTI)

A model for kinetically-limited vapor growth and aspect ratio evolution of atmospheric single ice crystals is presented. The method is based on the adaptive habit model of Chen and Lamb (1994), but is modified to include the deposition ...

Chengzhu Zhang; Jerry Y. Harrington

248

A Simple Model of Abyssal Circulation, Including Effects of Wind, Buoyancy and Topography  

Science Conference Proceedings (OSTI)

We examine problems of steady abyssal circulation using an inviscid planetary geostrophic layered model. The model includes an active wind-driven upper layer and arbitrary topography; forcing is in the form of specified interlayer mass fluxes ...

Susan L. Hautala; Stephen C. Riser

1989-05-01T23:59:59.000Z

249

Options for Removing Multiple Pollutants Including CO2 at Existing Coal-Fired Power Plants  

Science Conference Proceedings (OSTI)

This report is a technical review of the fuel changes and technology options for existing coal-fired power plants in response to potential new requirements for increasingly stringent multi-pollutant air emissions reductions, possibly including carbon dioxide (CO2). Preliminary costing of the major options is included. A database of the U.S. coal-fired power plants has been developed for further, more specific analyses.

2002-10-08T23:59:59.000Z

250

Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING NNSA) FEDERAL EMPLOYEES Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING NNSA) FEDERAL EMPLOYEES The familiar level of this module is divided into two sections. In the first section, we will discuss the objective, requirements, and the responsibilities assigned to the heads of field elements. In the second section, we will discuss the content of attachment 1, Functional Area Requirements. We have provided examples and a practice to help familiarize you with the material. The practice will also help prepare you for the criterion test. DOE Order Self Study Modules - DOE O 440.1B, Worker Protection Management for DOE (Including the National Nuclear Security Administration) Federal

251

C3E also includes a network of leaders from the public, private, non-profit  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

C3E also includes a network of leaders from the public, private, non-profit, C3E also includes a network of leaders from the public, private, non-profit, and academic sectors who support advocacy, research, scholarships, hands-on training, funding, and networking opportunities to prepare and inspire young women to enter and thrive in STEM fields. C3E Network participants have pledged many types of commitments, from highlighting female role models to creating hands-on activities for young girls. Ongoing activities include: * Filming and featuring women in clean energy fields on online / TV outlets (Earth Day Network); * Designing pilot projects and expanding Young Women's Conferences at DOE's

252

Including Alternative Resources in State Renewable Portfolio Standards: Current Design and Implementation Experience  

NLE Websites -- All DOE Office Websites (Extended Search)

Including Alternative Resources Including Alternative Resources in State Renewable Portfolio Standards: Current Design and Implementation Experience Jenny Heeter and Lori Bird Technical Report NREL/TP-6A20-55979 November 2012 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 15013 Denver West Parkway Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No. DE-AC36-08GO28308 Including Alternative Resources in State Renewable Portfolio Standards: Current Design and Implementation Experience Jenny Heeter and Lori Bird Prepared under Task No. SAO9.3110

253

Introduction to Small-Scale Wind Energy Systems (Including RETScreen Case  

Open Energy Info (EERE)

Introduction to Small-Scale Wind Energy Systems (Including RETScreen Case Introduction to Small-Scale Wind Energy Systems (Including RETScreen Case Study) (Webinar) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Introduction to Small-Scale Wind Energy Systems (Including RETScreen Case Study) (Webinar) Focus Area: Renewable Energy Topics: System & Application Design Website: www.leonardo-energy.org/webinar-introduction-small-scale-wind-energy-s Equivalent URI: cleanenergysolutions.org/content/introduction-small-scale-wind-energy- Language: English Policies: Deployment Programs DeploymentPrograms: Project Development This video teaches the viewer about wind turbines and RETscreen's wind module, which can be used to project the cost and production of a wind

254

The American Recovery and Reinvestment Act Includes $4.5 billion for the  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The American Recovery and Reinvestment Act Includes $4.5 billion The American Recovery and Reinvestment Act Includes $4.5 billion for the Office of Electricity Delivery and Energy Reliability The American Recovery and Reinvestment Act Includes $4.5 billion for the Office of Electricity Delivery and Energy Reliability February 25, 2009 - 4:52pm Addthis President Barack Obama signed into law the American Recovery and Reinvestment Act of 2009 (P.L.111-5). The $787 billion economic recovery package represents the largest and most ambitious effort to stimulate the economy in United States history. The Department of Energy (DOE) will be responsible for implementing over $38 billion of the $787 billion package. Of the DOE total, $4.5 Billion is allotted to the Office of Electricity Delivery and Energy Reliability. As outlined in the legislation, these funds are an investment in a

255

Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

40.1B, WORKER PROTECTION PROGRAM FOR DOE 40.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING NNSA) FEDERAL EMPLOYEES Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING NNSA) FEDERAL EMPLOYEES The familiar level of this module is divided into two sections. In the first section, we will discuss the objective, requirements, and the responsibilities assigned to the heads of field elements. In the second section, we will discuss the content of attachment 1, Functional Area Requirements. We have provided examples and a practice to help familiarize you with the material. The practice will also help prepare you for the criterion test. DOE Order Self Study Modules - DOE O 440.1B, Worker Protection Management for DOE (Including the National Nuclear Security Administration) Federal Employees

256

1) What are the current and future communications needs of utilities, including  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

(1) What are the current and future communications needs of utilities, including for the (1) What are the current and future communications needs of utilities, including for the deployment of new Smart Grid applications, and how are these needs being met? The current communication needs of SCE include: telephony, data, video, voice dispatch, mobile data, grid monitoring, grid control, tele-protection, customer communication, load management, automated meter reading, and collaboration capabilities ranging from virtual meetings to e-learning. SCE is using a combination of private, leased, and shared telecommunication networks to support these requirements. Those applications that require high availability, low latency, and stringent security rely on a private telecommunications network (SCEnet). A combination of transport media are

257

Fourier and Cauchy-Stieltjes transforms of power laws including stable distributions  

E-Print Network (OSTI)

We introduce a class of probability measures whose densities near infinity are mixtures of Pareto distributions. This class can be characterized by the Fourier transform which has a power series expansion including real powers, not only integer powers. This class includes stable distributions in probability and also non-commutative probability theories. We also characterize the class in terms of the Cauchy-Stieltjes transform and the Voiculescu transform. If the stability index is greater than one, stable distributions in probability theory do not belong to that class, while they do in non-commutative probability.

Takahiro Hasebe

2011-07-20T23:59:59.000Z

258

Prototype solar heating and cooling systems, including potable hot water. Quarterly report  

DOE Green Energy (OSTI)

The progress made in the development, delivery and support of two prototype solar heating and cooling systems including potable hot water is reported. The system consists of the following subsystems: collector, auxiliary heating, potable hot water, storage, control, transport, and government-furnished site data acquisition. Included is a comparison of the proposed Solaron-Heat Pump and Solaron-Desiccant Heating and Cooling Systems, Installation Drawings, data on the Akron House at Akron, Ohio, and other program activities from July 1, 1977 through November 9, 1977.

Not Available

1977-12-01T23:59:59.000Z

259

Combinatorial evaluation of systems including decomposition of a system representation into fundamental cycles  

DOE Patents (OSTI)

One embodiment of the present invention includes a computer operable to represent a physical system with a graphical data structure corresponding to a matroid. The graphical data structure corresponds to a number of vertices and a number of edges that each correspond to two of the vertices. The computer is further operable to define a closed pathway arrangement with the graphical data structure and identify each different one of a number of fundamental cycles by evaluating a different respective one of the edges with a spanning tree representation. The fundamental cycles each include three or more of the vertices.

Oliveira, Joseph S. (Richland, WA); Jones-Oliveira, Janet B. (Richland, WA); Bailey, Colin G. (Wellington, NZ); Gull, Dean W. (Seattle, WA)

2008-07-01T23:59:59.000Z

260

Prototype solar heating and cooling systems including potable hot water. Quarterly reports  

DOE Green Energy (OSTI)

The activities conducted by Solaron Corporation from November 1977 through September 1978 are summarized and the progress made in the development, delivery and support of two prototype solar heating and cooling systems including potable hot water is covered. The system consists of the following subsystems: solar collector, auxiliary heating, potable hot water, storage, control, transport, and government-furnished site data acquisition.

Williamson, R.

1978-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Solar Energy Education. Industrial arts: teacher's guide. Field test edition. [Includes glossary  

SciTech Connect

An instructional aid is presented which integrates the subject of solar energy into the classroom study of industrial arts. This guide for teachers was produced in addition to the student activities book for industrial arts by the USDOE Solar Energy Education. A glossary of solar energy terms is included. (BCS)

1981-05-01T23:59:59.000Z

262

A Flux Parameterization Including the Effects of Capillary Waves and Sea State  

Science Conference Proceedings (OSTI)

An air–sea interaction model that includes turbulent transport due to capillary waves (surface ripples) is developed. The model differs from others in that the physical premises are applicable to low wind speeds (10-m wind speed, U10 < 5 m s?1) ...

Mark A. Bourassa; Dayton G. Vincent; W. L. Wood

1999-05-01T23:59:59.000Z

263

ECOVILLAGE FACTS The complex includes 50 apartments (18 original and 32 new)  

E-Print Network (OSTI)

, community gatherings o Kitchen o Playroom o Dryers for Ecovillage residents o Solar water heater o Solar of the Ecovillage apartments include: o solar tubes and compact fluorescent lighting o low-flow toilets College-harvested wood o natural building techniques o a composting toilet o a net-metering solar electric

Baltisberger, Jay H.

264

Solar Energy Education. Home economics: teacher's guide. Field test edition. [Includes glossary  

SciTech Connect

An instructional aid is provided for home economics teachers who wish to integrate the subject of solar energy into their classroom activities. This teacher's guide was produced along with the student activities book for home economics by the US Department of Energy Solar Energy Education. A glossary of solar energy terms is included. (BCS)

1981-06-01T23:59:59.000Z

265

Method of preparing a negative electrode including lithium alloy for use within a secondary electrochemical cell  

DOE Patents (OSTI)

A negative electrode that includes a lithium alloy as active material is prepared by briefly submerging a porous, electrically conductive substrate within a melt of the alloy. Prior to solidification, excess melt can be removed by vibrating or otherwise manipulating the filled substrate to expose interstitial surfaces. Electrodes of such as solid lithium-aluminum filled within a substrate of metal foam are provided.

Tomczuk, Zygmunt (Palos Hills, IL); Olszanski, Theodore W. (Roselle, IL); Battles, James E. (Oak Forest, IL)

1977-03-08T23:59:59.000Z

266

Postgraduate Handbook Courses, programs and any arrangements for programs including staff  

E-Print Network (OSTI)

corn oil; Camelina oil. One of the following: Trans-Esterification, Esterification, Hydrotreating-process renewable biomass and petroleum. 5 POTENTIALLY RELEVANT I Naphtha, LPG Camelina oil Hydrotreating 5 including peat, dung, plant-oils, bees wax, rendered animal fats, draft animals, natural derived sources

Benatallah, Boualem

267

Solar Energy Education. Industrial arts: teacher's guide. Field test edition. [Includes glossary  

DOE Green Energy (OSTI)

An instructional aid is presented which integrates the subject of solar energy into the classroom study of industrial arts. This guide for teachers was produced in addition to the student activities book for industrial arts by the USDOE Solar Energy Education. A glossary of solar energy terms is included. (BCS)

Not Available

1981-05-01T23:59:59.000Z

268

QUALITATIVE PROPERTIES OF A 3-STEPS MODEL OF ANAEROBIC DIGESTION INCLUDING HYDROLYSIS OF PARTICULATE MATTER  

E-Print Network (OSTI)

QUALITATIVE PROPERTIES OF A 3-STEPS MODEL OF ANAEROBIC DIGESTION INCLUDING HYDROLYSIS-SupAgro MISTEA, 2 p. Viala 34060 Montpellier, France, fekih@supagro.inra.fr Introduction. Anaerobic digestion, the anaerobic digestion is generally considered as a three step process: hydrolysis and liquefaction

Paris-Sud XI, Université de

269

ON THE STANDARD METABOLIC RATES OF TROPICAL TUNAS, INCLUDING THE EFFECf OF BODY SIZE AND  

E-Print Network (OSTI)

ON THE STANDARD METABOLIC RATES OF TROPICAL TUNAS, INCLUDING THE EFFECf OF BODY SIZE AND ACUTE. This study was undertaken to obtain these data for the tropical tuna species, yellowfin tuna, Tkunnl tuna, KatsltWOO1t8 pelamis, previously published. The effect of acute temperature change on the SMR

270

Faddeev-type calculations of few-body nuclear reactions including Coulomb interaction  

E-Print Network (OSTI)

The method of screening and renormalization is used to include the Coulomb interaction between the charged particles in the description of few-body nuclear reactions. Calculations are done in the framework of Faddeev-type equations in momentum-space. The reliability of the method is demonstrated. The Coulomb effect on observables is discussed.

A. Deltuva

2008-10-24T23:59:59.000Z

271

Process, including PSA and membrane separation, for separating hydrogen from hydrocarbons  

DOE Patents (OSTI)

An improved process for separating hydrogen from hydrocarbons. The process includes a pressure swing adsorption step, a compression/cooling step and a membrane separation step. The membrane step relies on achieving a methane/hydrogen selectivity of at least about 2.5 under the conditions of the process.

Baker, Richard W. (Palo Alto, CA); Lokhandwala, Kaaeid A. (Union City, CA); He, Zhenjie (Fremont, CA); Pinnau, Ingo (Palo Alto, CA)

2001-01-01T23:59:59.000Z

272

CHEMICAL WASTE RECYCLING PROGRAM EMPTY CHEMICAL BOTTLES: which include all glass, plastic and metal bottles that  

E-Print Network (OSTI)

CHEMICAL WASTE RECYCLING PROGRAM EMPTY CHEMICAL BOTTLES: which include all glass, plastic and metal bottles that previously contained chemicals (hazardous or non-hazardous) are collected by CWS for recycling. Bottles should be dry and empty without chemical residue. Rinse and collect rinsate in chemical

Ungerleider, Leslie G.

273

Selecting Optional Fees Optional fees include meal plans, money on Tigerstripe, and a TAPS yearbook. All  

E-Print Network (OSTI)

supports all of the services at Redfern and includes: · Professional services of primary health care on pharmaceuticals, psychological testing, laboratory and x- ray services. · After Hours Nursewise telephone service. http://sisweb.clemson.edu/ Health Fee Policy University policy requires all students registered for six

Bolding, M. Chad

274

Solar water heater installation guidelines. A manual for homeowners and professionals. [Includes glossary  

SciTech Connect

The guidelines include detailed diagrams, a selected glossary, a bibliography of books and manuals which might prove useful and a checklist which should be used during and after the installation. The guidelines explain generally how to install a liquid solar hot water heater, but not a specific system. The following are covered: collector location, collector installation, plumbing, solar storage tanks, electrical, and insulation. (MHR)

1978-04-01T23:59:59.000Z

275

Solar Energy Education. Home economics: teacher's guide. Field test edition. [Includes glossary  

DOE Green Energy (OSTI)

An instructional aid is provided for home economics teachers who wish to integrate the subject of solar energy into their classroom activities. This teacher's guide was produced along with the student activities book for home economics by the US Department of Energy Solar Energy Education. A glossary of solar energy terms is included. (BCS)

Not Available

1981-06-01T23:59:59.000Z

276

Prototype solar heating and cooling systems including potable hot water. Quarterly reports, November 1976--June 1977  

DOE Green Energy (OSTI)

This report covers the progress made in the development, delivery and support of two prototype solar heating and cooling systems including potable hot water. The system consists of the following subsystems: collector, auxiliary heating, potable hot water, storage, control, transport, and government-furnished site data acquisition.

Not Available

1978-12-01T23:59:59.000Z

277

THERMOMECHANICS OF PV MODULES INCLUDING THE VISCOELASTICITY OF EVA Ulrich Eitner1,  

E-Print Network (OSTI)

in the cell distance is 170µm. Keywords: PV module, Encapsulation, Simulation, Reliability, Mechanics 1THERMOMECHANICS OF PV MODULES INCLUDING THE VISCOELASTICITY OF EVA Ulrich Eitner1, *, Matthias by a comparison to displacement experiments where the thermomechanical deformation of solar cells in a PV laminate

278

Seismic fracture analysis of concrete gravity dams including dam-reservoir interaction  

Science Conference Proceedings (OSTI)

In this study, the seismic fracture response of concrete gravity dams is investigated with considering the effects of dam-reservoir interaction. A co-axial rotating crack model (CRCM), which includes the strain softening behavior, is selected for concrete ... Keywords: Concrete gravity dam, Dam-reservoir interaction, Non-linear analysis, Seismic fracture

Yusuf Calayir; Muhammet Karaton

2005-07-01T23:59:59.000Z

279

Security and Access Policy Security of and access to campus facilities, including campus residences  

E-Print Network (OSTI)

Security and Access Policy Security of and access to campus facilities, including campus residences facilities. Residence halls are secured 24 hours a day. Over extended breaks, the doors of all residence halls will be secured around the clock. Some facilities may have individual hours, which may vary

Escher, Christine

280

The Fuels and Lubricants Research Division of Southwest Research includes extensive engines, fuels and lubricants research,  

E-Print Network (OSTI)

Caterpillar 1K Lubricant Test This test evaluates the piston deposits, liner wear, and oil consumption and oil consumption. The test is proposed for inclusion in the PC-10 category. Mack T8/T8A/T8E Lubricant of Mack engine oil specification EON+ 03, CI-4+ and will be included in PC-10. Mack T12 Lubricant Test

Chapman, Clark R.

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Hydraulically actuated fuel injector including a pilot operated spool valve assembly and hydraulic system using same  

DOE Patents (OSTI)

The present invention relates to hydraulic systems including hydraulically actuated fuel injectors that have a pilot operated spool valve assembly. One class of hydraulically actuated fuel injectors includes a solenoid driven pilot valve that controls the initiation of the injection event. However, during cold start conditions, hydraulic fluid, typically engine lubricating oil, is particularly viscous and is often difficult to displace through the relatively small drain path that is defined past the pilot valve member. Because the spool valve typically responds slower than expected during cold start due to the difficulty in displacing the relatively viscous oil, accurate start of injection timing can be difficult to achieve. There also exists a greater difficulty in reaching the higher end of the cold operating speed range. Therefore, the present invention utilizes a fluid evacuation valve to aid in displacement of the relatively viscous oil during cold start conditions.

Shafer, Scott F. (Morton, IL)

2002-01-01T23:59:59.000Z

282

Method for pulse control in a laser including a stimulated brillouin scattering mirror system  

DOE Patents (OSTI)

A laser system, such as a master oscillator/power amplifier system, comprises a gain medium and a stimulated Brillouin scattering SBS mirror system. The SBS mirror system includes an in situ filtered SBS medium that comprises a compound having a small negative non-linear index of refraction, such as a perfluoro compound. An SBS relay telescope having a telescope focal point includes a baffle at the telescope focal point which blocks off angle beams. A beam splitter is placed between the SBS mirror system and the SBS relay telescope, directing a fraction of the beam to an alternate beam path for an alignment fiducial. The SBS mirror system has a collimated SBS cell and a focused SBS cell. An adjustable attenuator is placed between the collimated SBS cell and the focused SBS cell, by which pulse width of the reflected beam can be adjusted.

Dane, C. Brent (Livermore, CA); Hackel, Lloyd (Livermore, CA); Harris, Fritz B. (Rocklin, CA)

2007-10-23T23:59:59.000Z

283

Policy Flash 2013-49 Updating Reporting Requirement Checklist including the  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Policy Flash 2013-49 Updating Reporting Requirement Checklist Policy Flash 2013-49 Updating Reporting Requirement Checklist including the research performance progress report Policy Flash 2013-49 Updating Reporting Requirement Checklist including the research performance progress report Questions concerning this policy flash should be directed to Ellen Colligan, of the Contract and Financial Assistance Policy Division, Office of Contract Management, Office of Acquisition and Project Management at (202) 287-1776, Ellen.colligan@hq.doe.gov Policy Flash 2013-49.pdf Attch_FA_RepReqChecklist_COMBINED_FINAL_4-23-13 (3).pdf More Documents & Publications ATTACHMENT FLASH 2011-46(6) Federal Assistance Reporting Checklist and Instructions for Projects Federal Assistance Reporting Checklist and Instructions for RD&D Projects

284

" Row: End Uses;" " Column: Energy Sources, including Net Electricity;"  

U.S. Energy Information Administration (EIA) Indexed Site

5 End Uses of Fuel Consumption, 2010;" 5 End Uses of Fuel Consumption, 2010;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Physical Units or Btu." " "," ",," ","Distillate"," "," ","Coal"," " " ",,,,"Fuel Oil",,,"(excluding Coal" " "," ","Net","Residual","and","Natural Gas(c)","LPG and","Coke and Breeze)"," " " ","Total","Electricity(a)","Fuel Oil","Diesel Fuel(b)","(billion","NGL(d)","(million","Other(e)"

285

" Row: End Uses;" " Column: Energy Sources, including Net Electricity;"  

U.S. Energy Information Administration (EIA) Indexed Site

5 End Uses of Fuel Consumption, 2002;" 5 End Uses of Fuel Consumption, 2002;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Physical Units or Btu." " "," ",," ","Distillate"," "," ",," "," " " ",,,,"Fuel Oil",,,"Coal" " "," ","Net","Residual","and","Natural ","LPG and","(excluding Coal"," ","RSE" " ","Total","Electricity(a)","Fuel Oil","Diesel Fuel(b)","Gas(c)","NGL(d)","Coke and Breeze)","Other(e)","Row"

286

" Row: End Uses;" " Column: Energy Sources, including Net Electricity;"  

U.S. Energy Information Administration (EIA) Indexed Site

6 End Uses of Fuel Consumption, 2010;" 6 End Uses of Fuel Consumption, 2010;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Trillion Btu." " "," ",," ","Distillate"," "," ",," " " ",,,,"Fuel Oil",,,"Coal" " "," ","Net","Residual","and",,"LPG and","(excluding Coal"," " "End Use","Total","Electricity(a)","Fuel Oil","Diesel Fuel(b)","Natural Gas(c)","NGL(d)","Coke and Breeze)","Other(e)"

287

" Row: End Uses;" " Column: Energy Sources, including Net Electricity;"  

U.S. Energy Information Administration (EIA) Indexed Site

6 End Uses of Fuel Consumption, 2002;" 6 End Uses of Fuel Consumption, 2002;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Trillion Btu." " "," ",," ","Distillate"," "," ",," "," " " ",,,,"Fuel Oil",,,"Coal",,"RSE" " "," ","Net","Residual","and","Natural ","LPG and","(excluding Coal"," ","Row" "End Use","Total","Electricity(a)","Fuel Oil","Diesel Fuel(b)","Gas(c)","NGL(d)","Coke and Breeze)","Other(e)","Factors"

288

" Row: End Uses;" " Column: Energy Sources, including Net Electricity;"  

U.S. Energy Information Administration (EIA) Indexed Site

6 End Uses of Fuel Consumption, 2006;" 6 End Uses of Fuel Consumption, 2006;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Trillion Btu." " "," ",," ","Distillate"," "," ",," " " ",,,,"Fuel Oil",,,"Coal" " "," ","Net","Residual","and",,"LPG and","(excluding Coal"," " "End Use","Total","Electricity(a)","Fuel Oil","Diesel Fuel(b)","Natural Gas(c)","NGL(d)","Coke and Breeze)","Other(e)"

289

" Row: End Uses;" " Column: Energy Sources, including Net Electricity;"  

U.S. Energy Information Administration (EIA) Indexed Site

1. End Uses of Fuel Consumption, 1998;" 1. End Uses of Fuel Consumption, 1998;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Physical Units or Btu." " "," ",," ","Distillate"," "," ","Coal"," "," " " ",,,,"Fuel Oil",,,"(excluding Coal" " "," ","Net","Residual","and","Natural Gas(c)","LPG and","Coke and Breeze)"," ","RSE" " ","Total","Electricity(a)","Fuel Oil","Diesel Fuel(b)","(billion","NGL(d)","(million","Other(e)","Row"

290

" Row: End Uses;" " Column: Energy Sources, including Net Electricity;"  

U.S. Energy Information Administration (EIA) Indexed Site

2. End Uses of Fuel Consumption, 1998;" 2. End Uses of Fuel Consumption, 1998;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Trillion Btu." " "," ",," ","Distillate"," "," ",," "," " " ",,,,"Fuel Oil",,,"Coal",,"RSE" " "," ","Net","Residual","and",,"LPG and","(excluding Coal"," ","Row" "End Use","Total","Electricity(a)","Fuel Oil","Diesel Fuel(b)","Natural Gas(c)","NGL(d)","Coke and Breeze)","Other(e)","Factors"

291

2008 CIM-XML Interoperability Including CIM-Based Tools Test  

Science Conference Proceedings (OSTI)

EPRI Initiatives have produced a number of drafts that have now become International Electrotechnical Commission (IEC) standards, including the Common Information Model (CIM) and the Generic Interface Definition (GID) specifications. These standards provide the basis for model-driven information exchange both within and between control centers and other systems in utility operations across the enterprise. Previous interoperability tests validated the use and acceptance of the CIM standard translated into...

2008-12-04T23:59:59.000Z

292

Method of preparing a negative electrode including lithium alloy for use within a secondary electrochemical cell  

DOE Patents (OSTI)

A negative electrode that includes a lithium alloy as active material is prepared by briefly submerging a porous, electrically conductive substrate within a melt of the alloy. Prior to solidification, excess melt can be removed by vibrating or otherwise manipulating the filled substrate to expose interstitial surfaces. Electrodes of such a solid lithium--aluminum filled within a substrate of metal foam are provided. 1 figure, 1 table.

Tomczuk, Z.; Olszanski, W.; Battles, J.E.

1975-12-09T23:59:59.000Z

293

Impact of supersonic and subsonic aircraft on ozone: Including heterogeneous chemical reaction mechanisms  

Science Conference Proceedings (OSTI)

Preliminary calculations suggest that heterogeneous reactions are important in calculating the impact on ozone from emissions of trace gases from aircraft fleets. In this study, three heterogeneous chemical processes that occur on background sulfuric acid aerosols are included and their effects on O{sub 3}, NO{sub x}, Cl{sub x}, HCl, N{sub 2}O{sub 5}, ClONO{sub 2} are calculated.

Kinnison, D.E.; Wuebbles, D.J.

1992-07-05T23:59:59.000Z

294

Nuclear Maintenance Applications Center: Motor Management Guide Supporting Plant License Renewal Including Environmental Qualification Considerations  

Science Conference Proceedings (OSTI)

This report was developed by the Electric Power Research Institute’s Large Electric Motor Users Group Information Working Group, which includes motor engineers, motor specialist consultants, and vendors. Environmental qualification (EQ) program owners were also involved in the development of this report. This report addresses the most important elements of a sound motor management program to support an informed decision on motor preservation and motor life extension. Motor life extensions of ...

2013-06-07T23:59:59.000Z

295

" Row: End Uses;" " Column: Energy Sources, including Net Electricity;"  

U.S. Energy Information Administration (EIA) Indexed Site

5 End Uses of Fuel Consumption, 2006;" 5 End Uses of Fuel Consumption, 2006;" " Level: National and Regional Data; " " Row: End Uses;" " Column: Energy Sources, including Net Electricity;" " Unit: Physical Units or Btu." " "," ",," ","Distillate"," "," ","Coal"," " " ",,,,"Fuel Oil",,,"(excluding Coal" " "," ","Net","Residual","and","Natural Gas(c)","LPG and","Coke and Breeze)"," " " ","Total","Electricity(a)","Fuel Oil","Diesel Fuel(b)","(billion","NGL(d)","(million","Other(e)"

296

Method for including operation and maintenance costs in the economic analysis of active solar energy systems  

DOE Green Energy (OSTI)

For a developing technology such as solar energy, the costs for operation and maintenance (O and M) can be substantial. In the past, most economic analyses included these costs by simply assuming that an annual cost will be incurred that is proportional to the initial cost of the system. However, in assessing the economics of new systems proposed for further research and development, such a simplification can obscure the issues. For example, when the typical method for including O and M costs in an economic analysis is used, the O and M costs associated with a newly developed, more reliable, and slightly more expensive controller will be assumed to increase - an obvious inconsistency. The method presented in this report replaces this simplistic approach with a representation of the O and M costs that explicitly accounts for the uncertainties and risks inherent in the operation of any equipment. A detailed description of the data inputs required by the method is included as well as a summary of data sources and an example of the method as applied to an active solar heating system.

Short, W.D.

1986-08-01T23:59:59.000Z

297

Method and system including a double rotary kiln pyrolysis or gasification of waste material  

DOE Patents (OSTI)

A method of destructively distilling an organic material in particulate form wherein the particulates are introduced through an inlet into one end of an inner rotating kiln ganged to and coaxial with an outer rotating kiln. The inner and outer kilns define a cylindrical annular space with the inlet being positioned in registry with the axis of rotation of the ganged kilns. During operation, the temperature of the wall of the inner rotary kiln at the inlet is not less than about 500.degree. C. to heat the particulate material to a temperature in the range of from about 200.degree. C. to about 900.degree. C. in a pyrolyzing atmosphere to reduce the particulate material as it moves from the one end toward the other end. The reduced particulates including char are transferred to the annular space between the inner and the outer rotating kilns near the other end of the inner rotating kiln and moved longitudinally in the annular space from near the other end toward the one end in the presence of oxygen to combust the char at an elevated temperature to produce a waste material including ash. Also, heat is provided which is transferred to the inner kiln. The waste material including ash leaves the outer rotating kiln near the one end and the pyrolysis vapor leaves through the particulate material inlet.

McIntosh, Michael J. (Bolingbrook, IL); Arzoumanidis, Gregory G. (Naperville, IL)

1997-01-01T23:59:59.000Z

298

Method and system including a double rotary kiln pyrolysis or gasification of waste material  

DOE Patents (OSTI)

A method is described for destructively distilling an organic material in particulate form wherein the particulates are introduced through an inlet into one end of an inner rotating kiln ganged to and coaxial with an outer rotating kiln. The inner and outer kilns define a cylindrical annular space with the inlet being positioned in registry with the axis of rotation of the ganged kilns. During operation, the temperature of the wall of the inner rotary kiln at the inlet is not less than about 500 C to heat the particulate material to a temperature in the range of from about 200 C to about 900 C in a pyrolyzing atmosphere to reduce the particulate material as it moves from the one end toward the other end. The reduced particulates including char are transferred to the annular space between the inner and the outer rotating kilns near the other end of the inner rotating kiln and moved longitudinally in the annular space from near the other end toward the one end in the presence of oxygen to combust the char at an elevated temperature to produce a waste material including ash. Also, heat is provided which is transferred to the inner kiln. The waste material including ash leaves the outer rotating kiln near the one end and the pyrolysis vapor leaves through the particulate material inlet. 5 figs.

McIntosh, M.J.; Arzoumanidis, G.G.

1997-09-02T23:59:59.000Z

299

A method and system including a double rotary kiln pyrolysis or gasification of waste material  

DOE Patents (OSTI)

A method is described for destructively distilling an organic material in particulate form wherein the particulates are introduced through an inlet into one end of an inner rotating kiln ganged to and coaxial with an outer rotating kiln. The inner and outer kilns define a cylindrical annular space with the inlet being positioned in registry with the axis of rotation of the ganged kilns. During operation, the temperature of the wall of the inner rotary kiln at the inlet is not less than about 500 C to heat the particulate material to a temperature in the range of from about 200 C to about 900 C in a pyrolyzing atmosphere to reduce the particulate material as it moves from the one end toward the other end. The reduced particulates including char are transferred to the annular space between the inner and the outer rotating kilns near the other end of the inner rotating kiln and moved longitudinally in the annular space from near the other end toward the one end in the presence of oxygen to combust the char at an elevated temperature to produce a waste material including ash. Also, heat is provided which is transferred to the inner kiln. The waste material including ash leaves the outer rotating kiln near the one end and the pyrolysis vapor leaves through the particulate material inlet.

McIntosh, M.J.; Arzoumanidis, G.G.

1995-12-31T23:59:59.000Z

300

Microelectromechanical accelerometer with resonance-cancelling control circuit including an idle state  

DOE Patents (OSTI)

A digital feedback control circuit is disclosed for use in an accelerometer (e.g. a microelectromechanical accelerometer). The digital feedback control circuit, which periodically re-centers a proof mass in response to a sensed acceleration, is based on a sigma-delta (.SIGMA..DELTA.) configuration that includes a notch filter (e.g. a digital switched-capacitor filter) for rejecting signals due to mechanical resonances of the proof mass and further includes a comparator (e.g. a three-level comparator). The comparator generates one of three possible feedback states, with two of the feedback states acting to re-center the proof mass when that is needed, and with a third feedback state being an "idle" state which does not act to move the proof mass when no re-centering is needed. Additionally, the digital feedback control system includes an auto-zero trim capability for calibration of the accelerometer for accurate sensing of acceleration. The digital feedback control circuit can be fabricated using complementary metal-oxide semiconductor (CMOS) technology, bi-CMOS technology or bipolar technology and used in single- and dual-proof-mass accelerometers.

Chu, Dahlon D. (Albuquerque, NM); Thelen, Jr., Donald C. (Bozeman, MT); Campbell, David V. (Albuquerque, NM)

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Swozzle based burner tube premixer including inlet air conditioner for low emissions combustion  

DOE Patents (OSTI)

A burner for use in a combustion system of a heavy-duty industrial gas turbine includes a fuel/air premixer having an air inlet, a fuel inlet, and an annular mixing passage. The fuel/air premixer mixes fuel and air into a uniform mixture for injection into a combustor reaction zone. The burner also includes an inlet flow conditioner disposed at the air inlet of the fuel/air premixer for controlling a radial and circumferential distribution of incoming air. The pattern of perforations in the inlet flow conditioner is designed such that a uniform air flow distribution is produced at the swirler inlet annulus in both the radial and circumference directions. The premixer includes a swozzle assembly having a series of preferably air foil shaped turning vanes that impart swirl to the airflow entering via the inlet flow conditioner. Each air foil contains internal fuel flow passages that introduce natural gas fuel into the air stream via fuel metering holes that pass through the walls of the air foil shaped turning vanes. By injecting fuel in this manner, an aerodynamically clean flow field is maintained throughout the premixer. By injecting fuel via two separate passages, the fuel/air mixture strength distribution can be controlled in the radial direction to obtain optimum radial concentration profiles for control of emissions, lean blow outs, and combustion driven dynamic pressure activity as machine and combustor load are varied.

Tuthill, Richard Sterling (Bolton, CT); Bechtel, II, William Theodore (Scotia, NY); Benoit, Jeffrey Arthur (Scotia, NY); Black, Stephen Hugh (Duanesburg, NY); Bland, Robert James (Clifton Park, NY); DeLeonardo, Guy Wayne (Scotia, NY); Meyer, Stefan Martin (Troy, NY); Taura, Joseph Charles (Clifton Park, NY); Battaglioli, John Luigi (Glenville, NY)

2002-01-01T23:59:59.000Z

302

Table 6c. U.S. Residential Energy Intensity Using Weather ...  

U.S. Energy Information Administration (EIA)

51. 61. 46 . 42 . Single-Family ... Except for 1997, estimates include all the floor area of the housing unit that was enclosed from the weather. Sources: Energy ...

303

Microwave technology for waste management applications including disposition of electronic circuitry  

SciTech Connect

Microwave technology is being developed nationally and internationally for a variety of environmental remediation purposes. These efforts include treatment and destruction of a vast array of gaseous, liquid and solid hazardous wastes as well as subsequent immobilization of selected components. Microwave technology provides an important contribution to an arsenal of existing remediation methods that are designed to protect the public and environment from undesirable consequences of hazardous materials. Applications of microwave energy for environmental remediation will be discussed. Emphasized will be a newly developed microwave process designed to treat discarded electronic circuitry and reclaim the precious metals within for reuse.

Wicks, G.G. [Westinghouse Savannah River Co., Aiken, SC (United States); Clark, D.E.; Schulz, R.L.; Folz, D.C. [Univ. of Florida, Gainesville, FL (United States)

1995-09-01T23:59:59.000Z

304

X-ray Thomson scattering for partially ionized plasmas including the effect of bound levels  

E-Print Network (OSTI)

X-ray Thomson scattering is being developed as a method to measure the temperature, electron density, and ionization state of high energy density plasmas such as those used in inertial confinement fusion. Most experiments are currently done at large laser facilities that can create bright X-ray sources, however the advent of the X-ray free electron laser (X-FEL) provides a new bright source to use in these experiments. One challenge with X-ray Thomson scattering experiments is understanding how to model the scattering for partially ionized plasmas in order to include the contributions of the bound electrons in the scattered intensity. In this work we take the existing models of Thomson scattering that include elastic ion-ion scattering and the electron-electron plasmon scattering and add the contribution of the bound electrons in the partially ionized plasmas. We validated our model by analyzing existing beryllium experimental data. We then consider several higher Z materials such as Cr and predict the existe...

Nilsen, J; Cheng, K T

2013-01-01T23:59:59.000Z

305

Segmented instrumentation tube including a locking sleeve for interlocking the segments of the instrumentation tube  

DOE Patents (OSTI)

Segmented instrumentation tube including a locking sleeve for interlocking the segments of the instrumentation tube, so that the threaded ends of the instrumentation tube do not unthread when subjected to vibration, such an instrumentation tube being suitable for use in a nuclear reactor pressure vessel. The instrumentation tube has a first member having a threaded end portion that has a plurality of first holes circumferentially around the outside surface thereof. The instrumentation tube also has a second member having a threaded end portion that has a plurality of second holes circumferentially around the outside surface thereof. The threads of the second member are caused to threadably engage the threads of the first member for defining a threaded joint therebetween. A sleeve having an inside surface surrounds the end portion of the first member and the end portion of the second member and thus surrounds the threaded joint. The sleeve includes a plurality of first projections and second projections that outwardly extend from the inside surface to engage the first holes and the second holes, respectively. The outside surface of the sleeve is crimped or swaged at the locations of the first projections and second projections such that the first projections and the second projections engage their respective holes. In this manner, independent rotation of the first member with respect to the second member is prevented, so that the instrumentation tube will not unthread at its threaded joint.

Obermeyer, Franklin D. (Pensacola, FL)

1993-01-01T23:59:59.000Z

306

An Evaluation of Molten-Salt Power Towers Including Results of the Solar Two Project  

DOE Green Energy (OSTI)

This report utilizes the results of the Solar Two project, as well as continuing technology development, to update the technical and economic status of molten-salt power towers. The report starts with an overview of power tower technology, including the progression from Solar One to the Solar Two project. This discussion is followed by a review of the Solar Two project--what was planned, what actually occurred, what was learned, and what was accomplished. The third section presents preliminary information regarding the likely configuration of the next molten-salt power tower plant. This section draws on Solar Two experience as well as results of continuing power tower development efforts conducted jointly by industry and Sandia National Laboratories. The fourth section details the expected performance and cost goals for the first commercial molten-salt power tower plant and includes a comparison of the commercial performance goals to the actual performance at Solar One and Solar Two. The final section summarizes the successes of Solar Two and the current technology development activities. The data collected from the Solar Two project suggest that the electricity cost goals established for power towers are reasonable and can be achieved with some simple design improvements.

REILLY, HUGH E.; KOLB, GREGORY J.

2001-11-01T23:59:59.000Z

307

RELAP5-3D Code Includes Athena Features and Models  

DOE Green Energy (OSTI)

Version 2.3 of the RELAP5-3D computer program includes all features and models previously available only in the ATHENA version of the code. These include the addition of new working fluids (i.e., ammonia, blood, carbon dioxide, glycerol, helium, hydrogen, lead-bismuth, lithium, lithium-lead, nitrogen, potassium, sodium, and sodium-potassium) and a magnetohydrodynamic model that expands the capability of the code to model many more thermal-hydraulic systems. In addition to the new working fluids along with the standard working fluid water, one or more noncondensable gases (e.g., air, argon, carbon dioxide, carbon monoxide, helium, hydrogen, krypton, nitrogen, oxygen, sf6, xenon) can be specified as part of the vapor/gas phase of the working fluid. These noncondensable gases were in previous versions of RELAP5- 3D. Recently four molten salts have been added as working fluids to RELAP5-3D Version 2.4, which has had limited release. These molten salts will be in RELAP5-3D Version 2.5, which will have a general release like RELAP5-3D Version 2.3. Applications that use these new features and models are discussed in this paper.

Richard A. Riemke; Cliff B. Davis; Richard R. Schultz

2006-07-01T23:59:59.000Z

308

Segmented instrumentation tube including a locking sleeve for interlocking the segments of the instrumentation tube  

DOE Patents (OSTI)

Segmented instrumentation tube including a locking sleeve for interlocking the segments of the instrumentation tube, so that the threaded ends of the instrumentation tube do not unthread when subjected to vibration, such an instrumentation tube being suitable for use in a nuclear reactor pressure vessel. The instrumentation tube has a first member having a threaded end portion that has a plurality of first holes circumferentially around the outside surface thereof. The instrumentation tube also has a second member having a threaded end portion that has a plurality of second holes circumferentially around the outside surface thereof. The threads of the second member are caused to threadably engage the threads of the first member for defining a threaded joint there between. A sleeve having an inside surface surrounds the end portion of the first member and the end portion of the second member and thus surrounds the threaded joint. The sleeve includes a plurality of first projections and second projections that outwardly extend from the inside surface to engage the first holes and the second holes, respectively. The outside surface of the sleeve is crimped or swaged at the locations of the first projections and second projections such that the first projections and the second projections engage their respective holes. In this manner, independent rotation of the first member with respect to the second member is prevented, so that the instrumentation tube will not unthread at its threaded joint. 10 figures.

Obermeyer, F.D.

1993-11-16T23:59:59.000Z

309

Transportation R and D included in thermal and mechanical sciences program  

Science Conference Proceedings (OSTI)

Argonne National Laboratory is a multiprogram research and development laboratory operated by The University of Chicago for the US Department of Energy. At Argonne, applied research in thermal and mechanical sciences is performed within the Thermal and Mechanical Sciences Section of the Energy Technology Division. Current program areas include compact evaporators and condensers for the process and transportation industries, ice slurries for district cooling, advanced fluids for improved heat transfer and reduced pressure drop, flow-induced vibration and flow distribution in shell-and-tube heat exchangers, and dynamics and control of maglev systems. In general, the objective of the research is to extend the technology base in each of these areas and to facilitate its application in solving problems of importance to US industries and utilities. This is accomplished by developing validated design correlations and predictive methods. The staff of the Thermal and Mechanical Sciences Section have extensive experimental and analytical experience in heat transfer, multiphase flow, structural dynamics and control, fluid-structure interaction, transient flow and mixing, thermally driven flows, and flow visualization using ultra-high-speed video. Large, general-purpose test facilities and smaller, single-purpose test apparatuses are available for experiments and component design evaluation. A world-class capability in the study of flow-induced vibrations exists within the Section. Individual fact sheets, describing currently active research program areas, related facilities, and listing, as a contact, the principal investigator, are included.

NONE

1995-03-01T23:59:59.000Z

310

Dye laser amplifier including an improved window configuration for its dye beam  

DOE Patents (OSTI)

A dye laser amplifier in which a continuously replenished supply of dye is excited with a first light beam in order to amplify the intensity of a second different light beam passing therethrough is disclosed herein. This amplifier includes a cell though which a continuous stream of the dye is caused to pass, and means for directing the first beam into the cell while the second beam is directed into and through the same cell. There is also disclosed herein a specific improvement to this amplifier which resides in the use of a pair of particularly configured windows through which the second beam passes along fixed paths as the second beam enters and exits the dye cell. Each of these windows has a relatively thick main section which is substantially larger in dimensions transverse to its beam path than the cross section of the second beam itself, whereby to add structural integrity to the overall window. At the same time, the latter includes a second section which is disposed entirely within the confines of the main section and through which the second beam is intended to pass in its entirety. This second section is made substantially thinner than the main section in order to reduce optical distortion as the second beam passes therethrough.

O' Neil, Richard W. (Pleasanton, CA); Davin, James M. (Livermore, CA)

1992-01-01T23:59:59.000Z

311

Dye laser amplifier including an improved window configuration for its dye beam  

DOE Patents (OSTI)

A dye laser amplifier in which a continuously replenished supply of dye is excited with a first light beam in order to amplify the intensity of a second different light beam passing therethrough is disclosed herein. This amplifier includes a cell though which a continuous stream of the dye is caused to pass, and means for directing the first beam into the cell while the second beam is directed into and through the same cell. There is also disclosed herein a specific improvement to this amplifier which resides in the use of a pair of particularly configured windows through which the second beam passes along fixed paths as the second beam enters and exits the dye cell. Each of these windows has a relatively thick main section which is substantially larger in dimensions transverse to its beam path than the cross section of the second beam itself, whereby to add structural integrity to the overall window. At the same time, the latter includes a second section which is disposed entirely within the confines of the main section and through which the second beam is intended to pass in its entirety. This second section is made substantially thinner than the main section in order to reduce optical distortion as the second beam passes therethrough. 4 figs.

O' Neil, R.W.; Davin, J.M.

1992-12-01T23:59:59.000Z

312

Level: National and Regional Data; Row: End Uses; Column: Energy Sources, including Net Demand for Electricity;  

U.S. Energy Information Administration (EIA) Indexed Site

7 End Uses of Fuel Consumption, 2006; 7 End Uses of Fuel Consumption, 2006; Level: National and Regional Data; Row: End Uses; Column: Energy Sources, including Net Demand for Electricity; Unit: Physical Units or Btu. Distillate Coal Fuel Oil (excluding Coal Net Demand Residual and Natural Gas(c) LPG and Coke and Breeze) for Electricity(a) Fuel Oil Diesel Fuel(b) (billion NGL(d) (million End Use (million kWh) (million bbl) (million bbl) cu ft) (million bbl) short tons) Total United States TOTAL FUEL CONSUMPTION 977,338 40 22 5,357 21 46 Indirect Uses-Boiler Fuel 24,584 21 4 2,059 2 25 Conventional Boiler Use 24,584 11 3 1,245 2 6 CHP and/or Cogeneration Process 0 10 1 814 * 19 Direct Uses-Total Process 773,574 10 9 2,709 10 19 Process Heating

313

Level: National and Regional Data; Row: End Uses; Column: Energy Sources, including Net Electricity;  

U.S. Energy Information Administration (EIA) Indexed Site

5 End Uses of Fuel Consumption, 2006; 5 End Uses of Fuel Consumption, 2006; Level: National and Regional Data; Row: End Uses; Column: Energy Sources, including Net Electricity; Unit: Physical Units or Btu. Distillate Coal Fuel Oil (excluding Coal Net Residual and Natural Gas(c) LPG and Coke and Breeze) Total Electricity(a) Fuel Oil Diesel Fuel(b) (billion NGL(d) (million Other(e) End Use (trillion Btu) (million kWh) (million bbl) (million bbl) cu ft) (million bbl) short tons) (trillion Btu) Total United States TOTAL FUEL CONSUMPTION 15,658 835,382 40 22 5,357 21 46 5,820 Indirect Uses-Boiler Fuel -- 12,109 21 4 2,059 2 25 -- Conventional Boiler Use 12,109 11 3 1,245 2 6 CHP and/or Cogeneration Process 0 10 1 814 * 19 Direct Uses-Total Process

314

Including Alternative Resources in State Renewable Portfolio Standards: Current Design and Implementation Experience  

SciTech Connect

Currently, 29 states, the District of Columbia, and Puerto Rico have instituted a renewable portfolio standard (RPS). An RPS sets a minimum threshold for how much renewable energy must be generated in a given year. Each state policy is unique, varying in percentage targets, timetables, and eligible resources. This paper examines state experience with implementing renewable portfolio standards that include energy efficiency, thermal resources, and non-renewable energy and explores compliance experience, costs, and how states evaluate, measure, and verify energy efficiency and convert thermal energy. It aims to gain insights from the experience of states for possible federal clean energy policy as well as to share experience and lessons for state RPS implementation.

Heeter, J.; Bird, L.

2012-11-01T23:59:59.000Z

315

Level: National and Regional Data; Row: End Uses; Column: Energy Sources, including Net Electricity;  

U.S. Energy Information Administration (EIA) Indexed Site

6 End Uses of Fuel Consumption, 2006; 6 End Uses of Fuel Consumption, 2006; Level: National and Regional Data; Row: End Uses; Column: Energy Sources, including Net Electricity; Unit: Trillion Btu. Distillate Fuel Oil Coal Net Residual and LPG and (excluding Coal End Use Total Electricity(a) Fuel Oil Diesel Fuel(b) Natural Gas(c) NGL(d) Coke and Breeze) Other(e) Total United States TOTAL FUEL CONSUMPTION 15,658 2,850 251 129 5,512 79 1,016 5,820 Indirect Uses-Boiler Fue -- 41 133 23 2,119 8 547 -- Conventional Boiler Use 41 71 17 1,281 8 129 CHP and/or Cogeneration Process 0 62 6 838 1 417 Direct Uses-Total Process -- 2,244 62 52 2,788 39 412 -- Process Heating -- 346 59 19 2,487 32 345 -- Process Cooling and Refrigeration -- 206 * 1 32 * * -- Machine Drive

316

Level: National Data; Row: End Uses within NAICS Codes; Column: Energy Sources, including Net Electricity;  

U.S. Energy Information Administration (EIA) Indexed Site

2 End Uses of Fuel Consumption, 2006; 2 End Uses of Fuel Consumption, 2006; Level: National Data; Row: End Uses within NAICS Codes; Column: Energy Sources, including Net Electricity; Unit: Trillion Btu. Distillate Fuel Oil Coal NAICS Net Residual and LPG and (excluding Coal Code(a) End Use Total Electricity(b) Fuel Oil Diesel Fuel(c) Natural Gas(d) NGL(e) Coke and Breeze) Other(f) Total United States 311 - 339 ALL MANUFACTURING INDUSTRIES TOTAL FUEL CONSUMPTION 15,658 2,850 251 129 5,512 79 1,016 5,820 Indirect Uses-Boiler Fuel -- 41 133 23 2,119 8 547 -- Conventional Boiler Use -- 41 71 17 1,281 8 129 -- CHP and/or Cogeneration Process -- -- 62 6 838 1 417 -- Direct Uses-Total Process -- 2,244 62 52 2,788 39 412 -- Process Heating -- 346 59 19 2,487

317

Level: National and Regional Data; Row: End Uses; Column: Energy Sources, including Net Demand for Electricity;  

U.S. Energy Information Administration (EIA) Indexed Site

Next MECS will be conducted in 2010 Table 5.8 End Uses of Fuel Consumption, 2006; Level: National and Regional Data; Row: End Uses; Column: Energy Sources, including Net Demand for Electricity; Unit: Trillion Btu. Distillate Fuel Oil Coal Net Demand Residual and LPG and (excluding Coal End Use for Electricity(a) Fuel Oil Diesel Fuel(b) Natural Gas(c) NGL(d) Coke and Breeze) Total United States TOTAL FUEL CONSUMPTION 3,335 251 129 5,512 79 1,016 Indirect Uses-Boiler Fuel 84 133 23 2,119 8 547 Conventional Boiler Use 84 71 17 1,281 8 129 CHP and/or Cogeneration Process 0 62 6 838 1 417 Direct Uses-Total Process 2,639 62 52 2,788 39 412 Process Heating 379 59 19 2,487 32 345 Process Cooling and Refrigeration

318

Level: National Data; Row: End Uses within NAICS Codes; Column: Energy Sources, including Net Electricity;  

U.S. Energy Information Administration (EIA) Indexed Site

1 End Uses of Fuel Consumption, 2006; 1 End Uses of Fuel Consumption, 2006; Level: National Data; Row: End Uses within NAICS Codes; Column: Energy Sources, including Net Electricity; Unit: Physical Units or Btu. Distillate Coal Fuel Oil (excluding Coal Net Residual and Natural Gas(d) LPG and Coke and Breeze) NAICS Total Electricity(b) Fuel Oil Diesel Fuel(c) (billion NGL(e) (million Other(f) Code(a) End Use (trillion Btu) (million kWh) (million bbl) (million bbl) cu ft) (million bbl) short tons) (trillion Btu) Total United States 311 - 339 ALL MANUFACTURING INDUSTRIES TOTAL FUEL CONSUMPTION 15,658 835,382 40 22 5,357 21 46 5,820 Indirect Uses-Boiler Fuel -- 12,109 21 4 2,059 2 25 -- Conventional Boiler Use -- 12,109 11 3 1,245 2 6 -- CHP and/or Cogeneration Process

319

Theory, design, and operation of liquid metal fast breeder reactors, including operational health physics  

SciTech Connect

A comprehensive evaluation was conducted of the radiation protection practices and programs at prototype LMFBRs with long operational experience. Installations evaluated were the Fast Flux Test Facility (FFTF), Richland, Washington; Experimental Breeder Reactor II (EBR-II), Idaho Falls, Idaho; Prototype Fast Reactor (PFR) Dounreay, Scotland; Phenix, Marcoule, France; and Kompakte Natriumgekuhlte Kernreak Toranlange (KNK II), Karlsruhe, Federal Republic of Germany. The evaluation included external and internal exposure control, respiratory protection procedures, radiation surveillance practices, radioactive waste management, and engineering controls for confining radiation contamination. The theory, design, and operating experience at LMFBRs is described. Aspects of LMFBR health physics different from the LWR experience in the United States are identified. Suggestions are made for modifications to the NRC Standard Review Plan based on the differences.

Adams, S.R.

1985-10-01T23:59:59.000Z

320

Including the Effects of Electronic Excitations and Electron-Phonon Coupling in Cascade Simulations  

SciTech Connect

Radiation damage has traditionally been modeled using cascade simulations however such simulations generally neglect the effects of electron-ion interactions, which may be significant in high energy cascades. A model has been developed which includes the effects of electronic stopping and electron-phonon coupling in Molecular Dynamics simulations by means of an inhomogeneous Langevin thermostat. The energy lost by the atoms to electronic excitations is gained by the electronic system and the energy evolution of the electronic system is modeled by the heat diffusion equation. Energy is exchanged between the electronic system and the atoms in the Molecular Dynamics simulation by means of a Langevin thermostat, the temperature of which is the local electronic temperature. The model is applied to a 10 keV cascade simulation for Fe. (authors)

Duffy, Dorothy [Physics and Astronomy, UCL, London (United Kingdom)]|[EURATOM/UKAEA Fusion Association, Culham Science Centre, Oxfordshire (United Kingdom); Rutherford, Alexis [Physics and Astronomy, UCL, London (United Kingdom)

2008-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Dispersion in a thermal plasma including arbitrary degeneracy and quantum recoil  

Science Conference Proceedings (OSTI)

The longitudinal response function for a thermal electron gas is calculated including two quantum effects exactly, degeneracy, and the quantum recoil. The Fermi-Dirac distribution is expanded in powers of a parameter that is small in the nondegenerate limit and the response function is evaluated in terms of the conventional plasma dispersion function to arbitrary order in this parameter. The infinite sum is performed in terms of polylogarithms in the long-wavelength and quasistatic limits, giving results that apply for arbitrary degeneracy. The results are applied to the dispersion relations for Langmuir waves and to screening, reproducing known results in the nondegenerate and completely degenerate limits, and generalizing them to arbitrary degeneracy.

Melrose, D. B. [School of Physics, University of Sydney, New South Wales 2006 (Australia); Mushtaq, A. [School of Physics, University of Sydney, New South Wales 2006 (Australia); Theoretical Plasma Physics Division, PINSTECH, Nilore, 44000 Islamabad (Pakistan)

2010-11-15T23:59:59.000Z

322

Residential sidewall insulation case histories, including experiences and problems in the field application of loose fill  

SciTech Connect

An unbonded fiberglass loose-fill insulation was selected for this sidewall application study. The insert tube technique is described and the parameters that affect pneumatic application of the product are identified. The initial evaluation was conducted in the laboratory and included density and thermal testing. The laboratory results were then utilized in field studies. Ten homes with no sidewall insulation were retrofitted. Thermographic scans of sidewalls before and after retrofit confirmed the predicted reductions in heat loss based on calculation techniques given in the ASHRAE Handbook of Fundamentals. The improvement was further confirmed by comparing utility bills. Typical problems that occur while preparing a house for sidewall retrofit are discussed. The simple payback for typical houses is presented. Good correlation is shown between laboratory test results and field performance. Test data indicate that the application procedure used gave an effective R-value per product claim.

Infante, L.J.; Aller, P.F.; Fay, R.E.

1983-01-01T23:59:59.000Z

323

Engine including hydraulically actuated valvetrain and method of valve overlap control  

DOE Patents (OSTI)

An exhaust valve control method may include displacing an exhaust valve in communication with the combustion chamber of an engine to an open position using a hydraulic exhaust valve actuation system and returning the exhaust valve to a closed position using the hydraulic exhaust valve actuation assembly. During closing, the exhaust valve may be displaced for a first duration from the open position to an intermediate closing position at a first velocity by operating the hydraulic exhaust valve actuation assembly in a first mode. The exhaust valve may be displaced for a second duration greater than the first duration from the intermediate closing position to a fully closed position at a second velocity at least eighty percent less than the first velocity by operating the hydraulic exhaust valve actuation assembly in a second mode.

Cowgill, Joel (White Lake, MI)

2012-05-08T23:59:59.000Z

324

Flexible barrier film, method of forming same, and organic electronic device including same  

DOE Patents (OSTI)

A flexible barrier film has a thickness of from greater than zero to less than 5,000 nanometers and a water vapor transmission rate of no more than 1.times.10.sup.-2 g/m.sup.2/day at 22.degree. C. and 47% relative humidity. The flexible barrier film is formed from a composition, which comprises a multi-functional acrylate. The composition further comprises the reaction product of an alkoxy-functional organometallic compound and an alkoxy-functional organosilicon compound. A method of forming the flexible barrier film includes the steps of disposing the composition on a substrate and curing the composition to form the flexible barrier film. The flexible barrier film may be utilized in organic electronic devices.

Blizzard, John; Tonge, James Steven; Weidner, William Kenneth

2013-03-26T23:59:59.000Z

325

A high liquid yield process for retorting various organic materials including oil shale  

DOE Patents (OSTI)

This invention is a continuous retorting process for various high molecular weight organic materials, including oil shale, that yields an enhanced output of liquid product. The organic material, mineral matter, and an acidic catalyst, that appreciably adsorbs alkenes on surface sites at prescribed temperatures, are mixed and introduced into a pyrolyzer. A circulating stream of olefin enriched pyrolysis gas is continuously swept through the organic material and catalyst, whereupon, as the result of pyrolysis, the enhanced liquid product output is provided. Mixed spent organic material, mineral matter, and cool catalyst are continuously withdrawn from the pyrolyzer. Combustion of the spent organic material and mineral matter serves to reheat the catalyst. Olefin depleted pyrolysis gas, from the pyrolyzer, is enriched in olefins and recycled into the pyrolyzer. The reheated acidic catalyst is separated from the mineral matter and again mixed with fresh organic material, to maintain the continuously cyclic process. 2 figs.

Coburn, T.T.

1988-07-26T23:59:59.000Z

326

High liquid yield process for retorting various organic materials including oil shale  

DOE Patents (OSTI)

This invention is a continuous retorting process for various high molecular weight organic materials, including oil shale, that yields an enhanced output of liquid product. The organic material, mineral matter, and an acidic catalyst, that appreciably adsorbs alkenes on surface sites at prescribed temperatures, are mixed and introduced into a pyrolyzer. A circulating stream of olefin enriched pyrolysis gas is continuously swept through the organic material and catalyst, whereupon, as the result of pyrolysis, the enhanced liquid product output is provided. Mixed spent organic material, mineral matter, and cool catalyst are continuously withdrawn from the pyrolyzer. Combustion of the spent organic material and mineral matter serves to reheat the catalyst. Olefin depleted pyrolysis gas, from the pyrolyzer, is enriched in olefins and recycled into the pyrolyzer. The reheated acidic catalyst is separated from the mineral matter and again mixed with fresh organic material, to maintain the continuously cyclic process.

Coburn, Thomas T. (Livermore, CA)

1990-01-01T23:59:59.000Z

327

Estimating parameters of coalescing compact binaries with a detector network including LIGO Australia  

E-Print Network (OSTI)

One of the goals of gravitational-wave astronomy is simultaneous detection of gravitational-wave signals from merging compact-object binaries and the electromagnetic transients from these mergers. With the next generation of advanced ground-based gravitational wave detectors under construction, we examine the benefits of the proposed extension of the detector network to include a fourth site in Australia in addition to the network of Hanford, Livingston and Cascina sites. Using Bayesian parameter-estimation analyses of simulated gravitational-wave signals from a range of coalescing-binary locations and orientations, we study the improvement in parameter estimation. We find that an Australian detector can break degeneracies in several parameters; in particular, the localization of the source on the sky is improved by a factor of ~4, with more modest improvements in distance and binary inclination estimates. This enhanced ability to localize sources on the sky will be crucial in any search for electromagnetic c...

Aylott, Benjamin; Kalogera, Vassiliki; Mandel, Ilya; Raymond, Vivien; Rodriguez, Carl; van der Sluys, Marc; Vecchio, Alberto; Veitch, John

2011-01-01T23:59:59.000Z

328

The Food Crises: A quantitative model of food prices including speculators and ethanol conversion  

E-Print Network (OSTI)

Recent increases in basic food prices are severely impacting vulnerable populations worldwide. Proposed causes such as shortages of grain due to adverse weather, increasing meat consumption in China and India, conversion of corn to ethanol in the US, and investor speculation on commodity markets lead to widely differing implications for policy. A lack of clarity about which factors are responsible reinforces policy inaction. Here, for the first time, we construct a dynamic model that quantitatively agrees with food prices. The results show that the dominant causes of price increases are investor speculation and ethanol conversion. Models that just treat supply and demand are not consistent with the actual price dynamics. The two sharp peaks in 2007/2008 and 2010/2011 are specifically due to investor speculation, while an underlying upward trend is due to increasing demand from ethanol conversion. The model includes investor trend following as well as shifting between commodities, equities and bonds to take ad...

Lagi, Marco; Bertrand, Karla Z; Bar-Yam, Yaneer

2011-01-01T23:59:59.000Z

329

Dye laser amplifier including a low turbulence, stagnation-free dye flow configuration  

DOE Patents (OSTI)

A large (high flow rate) dye laser amplifier in which a continuous replenished supply of dye is excited by a first light beam, specifically a copper vapor laser beam, in order to amplify the intensity of a second different light beam, specifically a dye beam, passing through the dye is disclosed herein. This amplifier includes a dye cell defining a dye chamber through which a continuous stream of dye is caused to pass at a flow rate of for example 30 gallons/minute, a specifically designed support vessel for containing the dye cell and a screen device for insuring that the dye stream passes into the dye cell in a substantially turbulent free, stagnation-free manner.

Davin, James (Gilroy, CA)

1992-01-01T23:59:59.000Z

330

Nonleptonic two-body B decays including axial-vector mesons in the final state  

SciTech Connect

We present a systematic study of exclusive charmless nonleptonic two-body B decays including axial-vector mesons in the final state. We calculate branching ratios of B{yields}PA, VA, and AA decays, where A, V, and P denote an axial vector, a vector, and a pseudoscalar meson, respectively. We assume a naive factorization hypothesis and use the improved version of the nonrelativistic Isgur-Scora-Grinstein-Wise quark model for form factors in B{yields}A transitions. We include contributions that arise from the effective {delta}B=1 weak Hamiltonian H{sub eff}. The respective factorized amplitudes of these decays are explicitly shown and their penguin contributions are classified. We find that decays B{sup -}{yields}a{sub 1}{sup 0}{pi}{sup -}, B{sup 0}{yields}a{sub 1}{sup {+-}}{pi}{sup {+-}}, B{sup -}{yields}a{sub 1}{sup -}K{sup 0}, B{sup 0}{yields}a{sub 1}{sup +}K{sup -}, B{sup 0}{yields}f{sub 1}K{sup 0}, B{sup -}{yields}f{sub 1}K{sup -}, B{sup -}{yields}K{sub 1}{sup -}(1400){eta}{sup (')}, B{sup -}{yields}b{sub 1}{sup -}K{sup 0}, and B{sup 0}{yields}b{sub 1}{sup +}{pi}{sup -}(K{sup -}) have branching ratios of the order of 10{sup -5}. We also study the dependence of branching ratios for B{yields}K{sub 1}P(V,A) decays [K{sub 1}=K{sub 1}(1270), K{sub 1}(1400)] with respect to the mixing angle between K{sub 1A} and K{sub 1B}.

Calderon, G.; Munoz, J. H.; Vera, C. E. [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Coahuila, CP 27000, Torreon, Coahuila (Mexico); Departamento de Fisica, Universidad del Tolima, Apartado Aereo 546, Ibague (Colombia)

2007-11-01T23:59:59.000Z

331

Including realistic tidal deformations in binary black-hole initial data  

E-Print Network (OSTI)

A shortcoming of current binary black-hole initial data is the generation of spurious gravitational radiation, so-called junk radiation, when they are evolved. This problem is a consequence of an oversimplified modeling of the binary's physics in the initial data. Since junk radiation is not astrophysically realistic, it contaminates the actual waveforms of interest and poses a numerical nuisance. The work here presents a further step towards mitigating and understanding the origin of this issue, by incorporating post-Newtonian results in the construction of constraint-satisfying binary black-hole initial data. Here we focus on including realistic tidal deformations of the black holes in the initial data, by building on the method of superposing suitably chosen black hole metrics to compute the conformal data. We describe the details of our initial data for an equal-mass and nonspinning binary, compute the subsequent relaxation of horizon quantities in evolutions, and quantify the amount of junk radiation that is generated. These results are contrasted with those obtained with the most common choice of conformally flat (CF) initial data, as well as superposed Kerr-Schild (SKS) initial data. We find that when realistic tidal deformations are included, the early transients in the horizon geometries are significantly reduced, along with smaller deviations in the relaxed black hole masses and spins from their starting values. Likewise, the junk radiation content in the $l=2$ modes is reduced by a factor of $\\sim$1.7 relative to CF initial data, but only by a factor of $\\sim$1.2 relative to SKS initial data. More prominently, the junk radiation content in the $3\\leq l\\leq8$ modes is reduced by a factor of $\\sim$5 relative to CF initial data, and by a factor of $\\sim$2.4 relative to SKS initial data.

Tony Chu

2013-10-29T23:59:59.000Z

332

RDI's Wisdom Way Solar Village Final Report: Includes Utility Bill Analysis of Occupied Homes  

SciTech Connect

In 2010, Rural Development, Inc. (RDI) completed construction of Wisdom Way Solar Village (WWSV), a community of ten duplexes (20 homes) in Greenfield, MA. RDI was committed to very low energy use from the beginning of the design process throughout construction. Key features include: 1. Careful site plan so that all homes have solar access (for active and passive); 2. Cellulose insulation providing R-40 walls, R-50 ceiling, and R-40 floors; 3. Triple-pane windows; 4. Airtight construction (~0.1 CFM50/ft2 enclosure area); 5. Solar water heating systems with tankless, gas, auxiliary heaters; 6. PV systems (2.8 or 3.4kWSTC); 7. 2-4 bedrooms, 1,100-1,700 ft2. The design heating loads in the homes were so small that each home is heated with a single, sealed-combustion, natural gas room heater. The cost savings from the simple HVAC systems made possible the tremendous investments in the homes' envelopes. The Consortium for Advanced Residential Buildings (CARB) monitored temperatures and comfort in several homes during the winter of 2009-2010. In the Spring of 2011, CARB obtained utility bill information from 13 occupied homes. Because of efficient lights, appliances, and conscientious home occupants, the energy generated by the solar electric systems exceeded the electric energy used in most homes. Most homes, in fact, had a net credit from the electric utility over the course of a year. On the natural gas side, total gas costs averaged $377 per year (for heating, water heating, cooking, and clothes drying). Total energy costs were even less - $337 per year, including all utility fees. The highest annual energy bill for any home evaluated was $458; the lowest was $171.

Robb Aldrich, Steven Winter Associates

2011-07-01T23:59:59.000Z

333

Multimedia Resources, including the CMS Eye, from the Compact Muon Solenoid (CMS) Experiment at CERN  

DOE Data Explorer (OSTI)

The Compact Muon Solenoid (CMS) experiment is one of two large general-purpose particle physics detectors built on the proton-proton Large Hadron Collider (LHC) at CERN in Switzerland and France. The CMS detector is located in an underground cavern at Cessy in France. The CMS detector will study many aspects of proton collisions at 14 TeV, the center-of-mass energy of the LHC particle accelerator. [from http://en.wikipedia.org/wiki/Compact_Muon_Solenoid]

The US CMS collaboration, with 48 institutions, 420 Ph.D. physicists, over 100 graduate students, and nearly 200 engineers, technicians, and computer scientists is the largest national group in the CMS collaboration. US groups have made significant contributions to nearly every aspect of the detector throughout all phases including construction, installation and preparation for data-taking. The US collaboration also made major contributions to the construction and operation of the computing facilities needed to analyze the unprecedented amount of data to be generated by CMS. This work includes the software that allows physicists to operate the CMS detector, reconstruct the data, analyze it and extract new physics.

The CMS media website from CERN provides images, videos, presentations, and the CMS Eye, a system of webcams looking into the underground cavern at Cessy, into the control room, and even out of the window of the control room at the village of Cessy and the Jura Mountains. Many event displays are available in the image collections, as well as the CMS Photo Book covering 1998 û 2008 when CMS was being assembled, installed, and commissioned.

US-LHC and the International CMS Collaboration

334

ac_household2001.pdf  

U.S. Energy Information Administration (EIA) Indexed Site

6a. Air Conditioning by Type of Rented Housing Unit, 6a. Air Conditioning by Type of Rented Housing Unit, Million U.S. Households, 2001 Air Conditioning Characteristics RSE Column Factor: Total Rented Units Type of Rented Housing Unit RSE Row Factors Single-Family Apartments in Buildings With Mobile Home Two to Four Units Five or More Units 0.8 0.5 1.4 1.2 1.6 Households With Electric Air-Conditioning Equipment ........ 23.4 58.7 6.5 12.4 5.3 6.1 Air Conditioners Not Used ............ 0.9 1.1 Q 0.6 Q 23.0 Households Using Electric Air-Conditioning 1 .......................... 22.5 57.6 6.3 11.8 5.1 6.2 Type of Electric Air-Conditioning Used Central Air-Conditioning 2 .............. 12.7 43.6 3.2 7.1 3.5 8.5 Without a Heat Pump .................. 10.6 35.0 2.4 6.1 2.7 9.3 With a Heat Pump ....................... 2.2 8.6 0.8 1.0

335

spaceheat_household2001.pdf  

U.S. Energy Information Administration (EIA) Indexed Site

6a. Space Heating by Type of Rented Housing Unit, 6a. Space Heating by Type of Rented Housing Unit, Million U.S. Households, 2001 Space Heating Characteristics RSE Column Factor: Total Rented Units Type of Rented Housing Unit RSE Row Factors Single-Family Apartments in Buildings With Mobile Home Two to Four Units Five or More Units 0.5 0.8 1.1 0.9 2.5 Total ............................................... 34.3 10.5 7.4 15.2 1.1 6.9 Heat Home ..................................... 33.7 10.4 7.4 14.8 1.1 6.9 Do Not Heat Home ........................ 0.6 Q Q 0.5 Q 21.4 No Heating Equipment .................. 0.2 Q Q Q Q 84.5 Have Equipment But Do Not Use It ................................ 0.4 Q Q 0.3 Q 36.4 Main Heating Fuel and Equipment (Have and Use Equipment) ............ 33.7 10.4 7.4 14.8 1.1 6.9 Natural Gas ...................................

336

Expanded rock blast modeling capabilities of DMC{_}BLAST, including buffer blasting  

SciTech Connect

A discrete element computer program named DMC{_}BLAST (Distinct Motion Code) has been under development since 1987 for modeling rock blasting. This program employs explicit time integration and uses spherical or cylindrical elements that are represented as circles in 2-D. DMC{_}BLAST calculations compare favorably with data from actual bench blasts. The blast modeling capabilities of DMC{_}BLAST have been expanded to include independently dipping geologic layers, top surface, bottom surface and pit floor. The pit can also now be defined using coordinates based on the toe of the bench. A method for modeling decked explosives has been developed which allows accurate treatment of the inert materials (stemming) in the explosive column and approximate treatment of different explosives in the same blasthole. A DMC{_}BLAST user can specify decking through a specific geologic layer with either inert material or a different explosive. Another new feature of DMC{_}BLAST is specification of an uplift angle which is the angle between the normal to the blasthole and a vector defining the direction of explosive loading on particles adjacent to the blasthole. A buffer (choke) blast capability has been added for situations where previously blasted material is adjacent to the free face of the bench preventing any significant lateral motion during the blast.

Preece, D.S. [Sandia National Labs., Albuquerque, NM (United States); Tidman, J.P.; Chung, S.H. [ICI Explosives (Canada)

1996-12-31T23:59:59.000Z

337

Casting Apparatus Including A Gas Driven Molten Metal Injector And Method  

DOE Patents (OSTI)

The casting apparatus (50) includes a holding vessel (10) for containing a supply of molten metal (12) and a casting mold (52) located above the holding vessel (10) and having a casting cavity (54). A molten metal injector (14) extends into the holding vessel (10) and is at least partially immersed in the molten metal (12) in the holding vessel (10). The molten metal injector (14) is in fluid communication with the casting cavity (54). The molten metal injector (14) has an injector body (16) defining an inlet opening (24) for receiving molten metal into the injector body (16). A gas pressurization source (38) is in fluid communication with the injector body (16) for cyclically pressurizing the injector body (16) and inducing molten metal to flow from the injector body (16) to the casting cavity (54). An inlet valve (42) is located in the inlet opening (24) in the injector body (16) for filling molten metal into the injector body (16). The inlet valve (42) is configured to prevent outflow of molten metal from the injector body (16) during pressurization and permit inflow of molten metal into the injector body (16) after pressurization. The inlet valve (42) has an inlet valve actuator (44) located above the surface of the supply of molten metal (12) and is operatively connected to the inlet valve (42) for operating the inlet valve (42) between open and closed positions.

Meyer, Thomas N. (Murrysville, PA)

2004-06-01T23:59:59.000Z

338

Funding for state, city, and county governments in the state includes:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NE Nebraska Total Sum City, County, and SEO Allocations NE Nebraska Total Sum City, County, and SEO Allocations All $18,810,300 NE Nebraska State Energy Office $9,593,500 NE Bellevue City $194,200 NE Fremont City $106,400 NE Grand Island City $199,000 NE Hastings City $109,900 NE Kearney City $131,100 NE Lincoln City $2,401,000 NE Norfolk City $101,500 NE North Platte City $105,300 NE Omaha City $4,331,500 NE Papillion City $91,300 NE Cass County $99,900 NE Dakota County $87,300 NE Dawson County $106,300 NE Douglas County $255,800 NE Gage County $98,000 NE Lancaster County $110,300 NE Platte County $139,200 NE Sarpy County $312,600 NE Saunders County $80,600 NE Scotts Bluff County $155,600 In addition, today's announcement includes funding for the following Tribal

339

Funding for state, city, and county governments in the state includes:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NM New Mexico Total Sum City, County, and SEO NM New Mexico Total Sum City, County, and SEO Allocations All $20,608,300 NM New Mexico State Energy Office $9,593,500 NM Alamogordo City $147,700 NM Albuquerque City $5,051,200 NM Carlsbad City $107,800 NM Clovis City $139,800 NM Farmington City $191,800 NM Hobbs City $128,700 NM Las Cruces City $888,000 NM Rio Rancho City $697,000 NM Roswell City $195,500 NM Santa Fe City $781,600 NM Bernalillo County $459,500 NM Dona Ana County $446,900 NM Grant County $126,400 NM McKinley County $299,600 NM Rio Arriba County $166,500 NM San Juan County $329,400 NM Sandoval County $169,500 NM Santa Fe County $264,000 NM Taos County $134,100 NM Valencia County $289,800 In addition, today's announcement includes funding for the following Tribal

340

Funding for state, city, and county governments in the state includes:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NV NV Nevada Total Sum City, County, and SEO Allocations All $31,983,500 NV Nevada State Energy Office $9,593,500 NV Boulder City City $61,600 NV Carson City City $538,900 NV Elko City $76,500 NV Fernley City $52,000 NV Henderson City $2,237,000 NV Las Vegas City $5,449,200 NV Mesquite City $69,900 NV North Las Vegas City $1,907,400 NV Reno City $2,142,800 NV Sparks City $840,000 NV Churchill County $104,900 NV Clark County $7,663,500 NV Douglas County $195,000 NV Elko County $123,600 NV Humboldt County $75,600 NV Lyon County $165,200 NV Nye County $185,700 NV Pershing County $50,000 NV Washoe County $401,200 NV White Pine County $50,000 In addition, today's announcement includes funding for the following Tribal

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

cDNA encoding a polypeptide including a hev ein sequence  

DOE Patents (OSTI)

A cDNA clone (HEV1) encoding hevein was isolated via polymerase chain reaction (PCR) using mixed oligonucleotides corresponding to two regions of hevein as primers and a Hevea brasiliensis latex cDNA library as a template. HEV1 is 1018 nucleotides long and includes an open reading frame of 204 amino acids. The deduced amino acid sequence contains a putative signal sequence of 17 amino acid residues followed by a 187 amino acid polypeptide. The amino-terminal region (43 amino acids) is identical to hevein and shows homology to several chitin-binding proteins and to the amino-termini of wound-induced genes in potato and poplar. The carboxyl-terminal portion of the polypeptide (144 amino acids) is 74-79% homologous to the carboxyl-terminal region of wound-inducible genes of potato. Wounding, as well as application of the plant hormones abscisic acid and ethylene, resulted in accumulation of hevein transcripts in leaves, stems and latex, but not in roots, as shown by using the cDNA as a probe. A fusion protein was produced in E. coli from the protein of the present invention and maltose binding protein produced by the E. coli.

Raikhel, Natasha V. (Okemos, MI); Broekaert, Willem F. (Dilbeek, BE); Chua, Nam-Hai (Scarsdale, NY); Kush, Anil (New York, NY)

2000-07-04T23:59:59.000Z

342

Information management for global environmental change, including the Carbon Dioxide Information Analysis Center  

Science Conference Proceedings (OSTI)

The issue of global change is international in scope. A body of international organizations oversees the worldwide coordination of research and policy initiatives. In the US the National Science and Technology Council (NSTC) was established in November of 1993 to provide coordination of science, space, and technology policies throughout the federal government. NSTC is organized into nine proposed committees. The Committee on Environmental and Natural Resources (CERN) oversees the US Department of Energy`s Global Change Research Program (USGCRP). As part of the USGCRP, the US Department of Energy`s Global Change Research Program aims to improve the understanding of Earth systems and to strengthen the scientific basis for the evaluation of policy and government action in response to potential global environmental changes. This paper examines the information and data management roles of several international and national programs, including Oak Ridge National Laboratory`s (ORNL`s) global change information programs. An emphasis will be placed on the Carbon Dioxide Information Analysis Center (CDIAC), which also serves as the World Data Center-A for Atmospheric Trace Gases.

Stoss, F.W. [Oak Ridge National Lab., TN (United States). Carbon Dioxide Information Analysis Center

1994-06-01T23:59:59.000Z

343

Magnetohydrodynamic Simulations of the Formation of Cold Fronts in Clusters of Galaxies including Heat Conduction  

E-Print Network (OSTI)

Recent Chandra observations of clusters of galaxies revealed the existence of a sharp ridge in the X-ray surface brightness where the temperature drops across the front. This front is called the cold front. We present the results of two-dimensional magnetohydrodynamic simulations of the time evolution of a dense subcluster plasma moving in a cluster of galaxies. Anisotropic heat conduction along the magnetic field lines is included. In the models without magnetic fields, the numerical results indicate that the heat conduction from the hot ambient plasma heats the cold dense plasma of the subcluster and diffuses out the cold front. When magnetic fields exist in a cluster of galaxies, however, cold fronts can be maintained because the heat conduction across the magnetic field lines is suppressed. We found that, even when the magnetic fields in a cluster of galaxies are disordered, heat conduction across the front is restricted because the magnetic field lines are stretched along the front. Numerical results reproduced the X-ray intensity distribution observed in the A3667 cluster of galaxies.

Naoki Asai; Naoya Fukuda; Ryoji Matsumoto

2004-04-07T23:59:59.000Z

344

Solar energy collector including a weightless balloon with sun tracking means  

DOE Patents (OSTI)

A solar energy collector having a weightless balloon, the balloon including a transparent polyvinylfluoride hemisphere reinforced with a mesh of ropes secured to its outside surface, and a laminated reflector hemisphere, the inner layer being clear and aluminized on its outside surface and the outer layer being opaque, the balloon being inflated with lighter-than-air gas. A heat collection probe extends into the balloon along the focus of reflection of the reflective hemisphere for conducting coolant into and out of the balloon. The probe is mounted on apparatus for keeping the probe aligned with the sun's path, the apparatus being founded in the earth for withstanding wind pressure on the balloon. The balloon is lashed to the probe by ropes adhered to the outer surface of the balloon for withstanding wind pressures of 100 miles per hour. Preferably, the coolant is liquid sodium-potassium eutectic alloy which will not normally freeze at night in the temperate zones, and when heated to 4,000.degree. R exerts a pressure of only a few atmospheres.

Hall, Frederick F. (2452 Villaneuva Way, Mountain View, CA 94040)

1978-01-01T23:59:59.000Z

345

High accuracy power spectra including baryonic physics in dynamical Dark Energy models  

E-Print Network (OSTI)

The next generation mass probes will obtain information on non--linear power spectra P(k,z) and their evolution, allowing us to investigate the nature of Dark Energy. To exploit such data we need high precision simulations, extending at least up to scales of k\\simeq 10 h^-1 Mpc, where the effects of baryons can no longer be neglected. In this paper, we present a series of large scale hydrodynamical simulations for LCDM and dynamical Dark Energy (dDE) models, in which the equation of state parameter is z-dependent. The simulations include gas cooling, star formation and Supernovae feedback. They closely approximate the observed star formation rate and the observationally derived star/Dark Matter mass ratio in collapsed systems. Baryon dynamics cause spectral shifts exceeding 1% at k > 2-3 hMpc^-1 compared to pure n-body simulations in the LCDM simulations. This agrees with previous studies, although we find a smaller effect (~50%) on the power spectrum amplitude at higher k's. dDE exhibits similar behavior, ev...

Casarini, Luciano; Bonometto, Silvio A; Stinson, Greg S

2010-01-01T23:59:59.000Z

346

QCD Equation of State From a Chiral Hadronic Model Including Quark Degrees of Freedom  

E-Print Network (OSTI)

This work presents an effective model for strongly interacting matter and the QCD equation of state (EoS). The model includes both hadron and quark degrees of freedom and takes into account the transition of chiral symmetry restoration as well as the deconfinement phase transition. At low temperatures $T$ and baryonic densities $\\rho_B$ a hadron resonance gas is described using a SU(3)-flavor sigma-omega model and a quark phase is introduced in analogy to PNJL models for higher $T$ and $\\rho_B$. In this way, the correct asymptotic degrees of freedom are used in a wide range of $T$ and $\\rho_B$. Here, results of this model concerning the chiral and deconfinement phase transitions and thermodynamic model properties are presented. Large hadron resonance multiplicities in the transition region emphasize the importance of heavy-mass resonance states in this region and their impact on the chiral transition behavior. The resulting phase diagram of QCD matter at small chemical potentials is in line with latest lattice QCD and thermal model results.

Philip Rau; Jan Steinheimer; Stefan Schramm; Horst Stöcker

2013-06-14T23:59:59.000Z

347

Estimating parameters of coalescing compact binaries with a detector network including LIGO Australia  

E-Print Network (OSTI)

One of the goals of gravitational-wave astronomy is simultaneous detection of gravitational-wave signals from merging compact-object binaries and the electromagnetic transients from these mergers. With the next generation of advanced ground-based gravitational wave detectors under construction, we examine the benefits of the proposed extension of the detector network to include a fourth site in Australia in addition to the network of Hanford, Livingston and Cascina sites. Using Bayesian parameter-estimation analyses of simulated gravitational-wave signals from a range of coalescing-binary locations and orientations, we study the improvement in parameter estimation. We find that an Australian detector can break degeneracies in several parameters; in particular, the localization of the source on the sky is improved by a factor of ~4, with more modest improvements in distance and binary inclination estimates. This enhanced ability to localize sources on the sky will be crucial in any search for electromagnetic counterparts to detected gravitational-wave signals.

Benjamin Aylott; Benjamin Farr; Vassiliki Kalogera; Ilya Mandel; Vivien Raymond; Carl Rodriguez; Marc van der Sluys; Alberto Vecchio; John Veitch

2011-06-13T23:59:59.000Z

348

Applying environmental externalities to US Clean Coal Technologies for Asia. [Including external environmental costs  

SciTech Connect

The United States is well positioned to play an expanding role in meeting the energy technology demands of the Asian Pacific Basin, including Indonesia, Thailand, and the Republic of China (ROC-Taiwan). The US Department of Energy Clean Coal Technology (CCT) Demonstration Program provides a proving ground for innovative coal-related technologies that can be applied domestically and abroad. These innovative US CCTs are expected to satisfy increasingly stringent environmental requirements while substantially improving power generation efficiencies. They should also provide distinct advantages over conventional pulverized coal-fired combustors. Finally, they are expected to be competitive with other energy options currently being considered in the region. This paper presents potential technology scenarios for Indonesia, Thailand, and the ROC-Taiwan and considers an environmental cost-benefit approach employing a newly developed method of applying environmental externalities. Results suggest that the economic benefits from increased emission control can indeed be quantified and used in cost-benefit comparisons, and that US CCTs can be very cost effective in reducing emissions.

Szpunar, C.B.; Gillette, J.L.

1993-01-01T23:59:59.000Z

349

RDI's Wisdom Way Solar Village Final Report: Includes Utility Bill Analysis of Occupied Homes  

DOE Green Energy (OSTI)

7. 2-4 bedrooms, 1,100-1,700 ft2. The design heating loads in the homes were so small that each home is heated with a single, sealed-combustion, natural gas room heater. The cost savings from the simple HVAC systems made possible the tremendous investments in the homes' envelopes. The Consortium for Advanced Residential Buildings (CARB) monitored temperatures and comfort in several homes during the winter of 2009-2010. In the Spring of 2011, CARB obtained utility bill information from 13 occupied homes. Because of efficient lights, appliances, and conscientious home occupants, the energy generated by the solar electric systems exceeded the electric energy used in most homes. Most homes, in fact, had a net credit from the electric utility over the course of a year. On the natural gas side, total gas costs averaged $377 per year (for heating, water heating, cooking, and clothes drying). Total energy costs were even less - $337 per year, including all utility fees. The highest annual energy bill for any home evaluated was $458; the lowest was $171.

Robb Aldrich, Steven Winter Associates

2011-07-01T23:59:59.000Z

350

SEARCHING FOR EXTRATERRESTRIAL INTELLIGENCE SIGNALS IN ASTRONOMICAL SPECTRA, INCLUDING EXISTING DATA  

Science Conference Proceedings (OSTI)

The main purpose of this article is to make astronomers aware that Searches for Extraterrestrial Intelligence (SETIs) can be carried out by analyzing standard astronomical spectra, including those they have already taken. Simplicity is the outstanding advantage of a search in spectra. The spectra can be analyzed by simple eye inspection or a few lines of code that uses Fourier transform software. Theory, confirmed by published experiments, shows that periodic signals in spectra can be easily generated by sending light pulses separated by constant time intervals. While part of this article, like all articles on SETIs, is highly speculative the basic physics is sound. In particular, technology now available on Earth could be used to send signals having the required energy to be detected at a target located 1000 lt-yr away. Extraterrestrial Intelligence (ETI) could use these signals to make us aware of their existence. For an ETI, the technique would also have the advantage that the signals could be detected both in spectra and searches for intensity pulses like those currently carried out on Earth.

Borra, Ermanno F., E-mail: borra@phy.ulaval.ca [Centre d'Optique, Photonique et Laser, Departement de Physique, Universite Laval, Quebec G1 K 7P4 (Canada)

2012-12-01T23:59:59.000Z

351

A Case for Including Atmospheric Thermodynamic Variables in Wind Turbine Fatigue Loading Parameter Identification  

DOE Green Energy (OSTI)

This paper makes the case for establishing efficient predictor variables for atmospheric thermodynamics that can be used to statistically correlate the fatigue accumulation seen on wind turbines. Recently, two approaches to this issue have been reported. One uses multiple linear-regression analysis to establish the relative causality between a number of predictors related to the turbulent inflow and turbine loads. The other approach, using many of the same predictors, applies the technique of principal component analysis. An examination of the ensemble of predictor variables revealed that they were all kinematic in nature; i.e., they were only related to the description of the velocity field. Boundary-layer turbulence dynamics depends upon a description of the thermal field and its interaction with the velocity distribution. We used a series of measurements taken within a multi-row wind farm to demonstrate the need to include atmospheric thermodynamic variables as well as velocity-related ones in the search for efficient turbulence loading predictors in various turbine-operating environments. Our results show that a combination of vertical stability and hub-height mean shearing stress variables meet this need over a period of 10 minutes.

Kelley, N. D.

1999-08-02T23:59:59.000Z

352

Funding for state, city, and county governments in the state includes:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MT MT Montana Total Sum City, County, and SEO Allocations All $13,971,000 MT Montana State Energy Office $9,593,500 MT Anaconda-Deer Lodge City $50,000 MT Billings City $1,003,000 MT Bozeman City $175,500 MT Butte-Silver Bow City $138,700 MT Great Falls City $570,100 MT Havre City $50,000 MT Helena City $138,600 MT Kalispell City $96,700 MT Miles City City $50,000 MT Missoula City $680,400 MT Cascade County $94,400 MT Flathead County $274,200 MT Gallatin County $198,700 MT Lake County $119,500 MT Lewis and Clark County $120,400 MT Lincoln County $80,000 MT Missoula County $151,000 MT Park County $67,100 MT Ravalli County $167,400 MT Yellowstone County $151,800 In addition, today's announcement includes funding for the following Tribal

353

Thermoelectric material including a multiple transition metal-doped type I clathrate crystal structure  

DOE Patents (OSTI)

A thermoelectric material includes a multiple transition metal-doped type I clathrate crystal structure having the formula A.sub.8TM.sub.y.sub.1.sup.1TM.sub.y.sub.2.sup.2 . . . TM.sub.y.sub.n.sup.nM.sub.zX.sub.46-y.sub.1.sub.-y.sub.2.sub.- . . . -y.sub.n.sub.-z. In the formula, A is selected from the group consisting of barium, strontium, and europium; X is selected from the group consisting of silicon, germanium, and tin; M is selected from the group consisting of aluminum, gallium, and indium; TM.sup.1, TM.sup.2, and TM.sup.n are independently selected from the group consisting of 3d, 4d, and 5d transition metals; and y.sub.1, y.sub.2, y.sub.n and Z are actual compositions of TM.sup.1, TM.sup.2, TM.sup.n, and M, respectively. The actual compositions are based upon nominal compositions derived from the following equation: z=8q.sub.A-|.DELTA.q.sub.1|y.sub.1-|.DELTA.q.sub.2|y.sub.2- . . . -|.DELTA.q.sub.n|y.sub.n, wherein q.sub.A is a charge state of A, and wherein .DELTA.q.sub.1, .DELTA.q.sub.2, .DELTA.q.sub.n are, respectively, the nominal charge state of the first, second, and n-th TM.

Yang, Jihui (Lakeshore, CA); Shi, Xun (Troy, MI); Bai, Shengqiang (Shanghai, CN); Zhang, Wenqing (Shanghai, CN); Chen, Lidong (Shanghai, CN); Yang, Jiong (Shanghai, CN)

2012-01-17T23:59:59.000Z

354

Efficient Evaluation of Doubly Periodic Green Functions in 3D Scattering, Including Wood Anomaly Frequencies  

E-Print Network (OSTI)

We present efficient methods for computing wave scattering by diffraction gratings that exhibit two-dimensional periodicity in three dimensional (3D) space. Applications include scattering in acoustics, electromagnetics and elasticity. Our approach uses boundary-integral equations. The quasi-periodic Green function is a doubly infinite sum of scaled 3D free-space outgoing Helmholtz Green functions. Their source points are located at the nodes of a periodicity lattice of the grating. For efficient numerical computation of the lattice sum, we employ a smooth truncation. Super-algebraic convergence to the Green function is achieved as the truncation radius increases, except at frequency-wavenumber pairs at which a Rayleigh wave is at exactly grazing incidence to the grating. At these "Wood frequencies", the term in the Fourier series representation of the Green function that corresponds to the grazing Rayleigh wave acquires an infinite coefficient and the lattice sum blows up. At Wood frequencies, we modify the Green function by adding two types of terms to it. The first type adds weighted spatial shifts of the Green function to itself with singularities below the grating; this yields algebraic convergence. The second-type terms are quasi-periodic plane wave solutions of the Helmholtz equation. They reinstate (with controlled coefficients) the grazing modes, effectively eliminated by the terms of first type. These modes are needed in the Green function for guaranteeing the well-posedness of the boundary-integral equation that yields the scattered field. We apply this approach to acoustic scattering by a doubly periodic 2D grating near and at Wood frequencies and scattering by a doubly periodic array of scatterers away from Wood frequencies.

Oscar P. Bruno; Stephen P. Shipman; Catalin Turc; Stephanos Venakides

2013-07-04T23:59:59.000Z

355

Extended three-dimensional ADCIRC hydrodynamic model to include baroclinic flow and sediment transport  

E-Print Network (OSTI)

The objective of this research is to identify the circulation patterns of the water and sediment fluxes in coastal and estuarine zones, where the shoaling processes correlate with tide generating flow patterns. The research provides a better understanding of the characteristics of spatial and temporal variability of currents. An important deviation from previous research is the inclusion of the baroclinic term, which becomes very important in density driven flows. The understanding of this process provides a basis for determining how the water circulation three-dimensionally controls the hydrodynamics of the system and ultimately transports the suspended and soluble materials due to combined currents and waves. A three-dimensional circulation model is used to calculate the water circulation. The model is based on the three-dimensional (3D) version of Advanced Circulation (AD-CIRC) Hydrodynamic Model with extending the Sediment Transport module. The model is based on the finite element method on unstructured grids. The output of the hydrody-namic model is used to estimate spatial and temporal advections, dispersions and bottom shear stress for the erosion, suspension, deposition and transport of sediment. The model development includes extending the existing three-dimensional (3D) ADCIRC Model with (1) baroclinic forcing term and (2) transport module of suspended and soluble materials. The transport module covers the erosion, material suspension and deposition processes for both cohesive and non-cohesive type sediments. The inclusion of the baroclinic demonstrates the potential of over or underpredicting the total net transport of suspended cohesive sediment under influence of currents. The model provides less than 6% error of theoretical mass conservation for eroded, suspended and deposited sediment material. The inclusion of the baroclinic term in stratified water demonstrates the prevailing longshore sediment transport. It is shown that the model has an application to the transport of the cohesive sediments from the mouth of the Mississippi River along the north shore of the Gulf of Mexico towards and along the Texas coast. The model is also applicable to determine the design erosion thickness of a cap for isolating contaminated dredged material and to evaluate the appro-priate grain size of cap sediments to minimize the erosion.

Pandoe, Wahyu Widodo

2003-05-01T23:59:59.000Z

356

Why Do Companies Rent Green? Real Property and Corporate Social Responsibility  

E-Print Network (OSTI)

energy use of the building, as certified by a professional engineer, achieves certain specified benchmark

Eichholtz, Piet; Kok, Nils; Quigley, John M.

2010-01-01T23:59:59.000Z

357

Why Do Companies Rent Green? Real Property and Corporate Social Responsibility  

E-Print Network (OSTI)

2001. The Effect of Green Investments on Corporate Behavior.2005. Green Investors and Corporate Investment. Structuralgreen space are public administration, national commercial banks, crude petroleum and gas, and investment

Eichholtz, Piet; Kok, Nils; Quigley, John M.

2010-01-01T23:59:59.000Z

358

Why Do Companies Rent Green? Real Property and Corporate Social Responsibility  

E-Print Network (OSTI)

buildings with a green label – awarded by Energy Star or thespace in green office buildings is rational, as energywith a green label, that is, buildings with an Energy Star

Eichholtz, Piet; Kok, Nils; Quigley, John M.

2009-01-01T23:59:59.000Z

359

The Effect of Power Plants on Local Housing Values and Rents: Evidence from Restricted Census Microdata  

E-Print Network (OSTI)

Current trends in electricity consumption imply that hundreds of new fossil-fuel power plants will be built in the United States over the next several decades. Power plant siting has become increasingly contentious, in ...

Davis, Lucas W.

2008-01-01T23:59:59.000Z

360

Why Do Companies Rent Green? Real Property and Corporate Social Responsibility  

E-Print Network (OSTI)

Roth, K. 2000. Why Companies Go Green: A Model of EcologicalDoing Well by Doing Good: Green Office Buildings. AmericanPsychological Barriers to Green Building. Organization and

Eichholtz, Piet; Kok, Nils; Quigley, John M.

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Why Do Companies Rent Green? Real Property and Corporate Social Responsibility  

E-Print Network (OSTI)

Roth K. 2000. Why Companies Go Green: A Model of EcologicalA, Heinkel R, Kraus A. 2005. Green Investors and CorporateAiman-Smith L. 1996. Green Career Choices: The Influences of

Eichholtz, Piet; Kok, Nils; Quigley, John M.

2010-01-01T23:59:59.000Z

362

End-user tax survey: Government displacement of economic rent on gasoline  

Science Conference Proceedings (OSTI)

Taxes on motor fuels have continued to climb over the past two years as oil producers and oil consumers continue to help fill government coffers. Governments claim the taxes lead to fuel conservation, promote {open_quotes}alternative fuels,{close_quotes} and provide revenue that would need to be provided by some other tax if not for the fuel tax. In this issue, Energy Detente examines the level of taxation on gasoline in selected countries and how it has changed over the past two years.

NONE

1995-04-30T23:59:59.000Z

363

Why Do Companies Rent Green? Real Property and Corporate Social Responsibility  

E-Print Network (OSTI)

oil industry seems to be well represented in green office buildings, with tenants such as The totals

Eichholtz, Piet; Kok, Nils; Quigley, John M.

2010-01-01T23:59:59.000Z

364

R&D/Office Space in ATR for Rent Center of Kansai Science City  

E-Print Network (OSTI)

-cho, Souraku-gun, Kyoto #12;Rental Area Plan Rentable area Approx. 1200 2F #12;Terms and Conditions Use and Private Firms R&D institutes Business accounts of ATR Efficient sales activities #12;Detailing the merits to brain information science ( f and support service for a measurement) Efficient sales activities

Nakanishi, Jun

365

Financial Policy & Procedure Instructions Manual FPI I-1 Lease Agreements, Rent and Use Charges  

E-Print Network (OSTI)

not more than the aggregate cost of the services over a long term period agreed to by the institution to the cost of providing those services during any one fiscal year as long as rates are reviewed periodically for consistency with the long term plan and adjusted if necessary." E. In summary, the Federal Government requires

366

Green Growth and the Efficient Use of Natural Resources  

E-Print Network (OSTI)

The relatively new concept of "green growth" can be fruitfully connected to concepts and theories in neoclassical economics including market externalities, Ricardian and Hotelling rents, and policies that would correct ...

Reilly, John

2012-06-14T23:59:59.000Z

367

,"Housing Units1","Average Square Footage Per Housing Unit",...  

U.S. Energy Information Administration (EIA) Indexed Site

the U.S. Department of Energy's Office of Energy and Efficiency and Renewable Energy (EERE). 5Rented includes households that occupy their primary housing unit without payment of...

368

Preliminary Release: April 19, 2012  

U.S. Energy Information Administration (EIA) Indexed Site

the U.S. Department of Energy's Office of Energy and Efficiency and Renewable Energy (EERE). 5Rented includes households that occupy their primary housing unit without payment of...

369

The value of contractual terms in office leases  

E-Print Network (OSTI)

This paper uses a comprehensive data set to develop a hedonic model of office rent that estimates values of contractual terms such as tenant improvement allowances, leasing commissions, and options. The model includes ...

Sheehan, Kevin T. (Kevin Thomas)

2006-01-01T23:59:59.000Z

370

Interior of an off-campus apartment. Photo: Michael Diamond Contributor: Amanda Lanyon-LeSage  

E-Print Network (OSTI)

. Water and heat are included in rent, and residents are responsible for paying electricity. Free laundry of your own parking space! You really don't need a car to get into campus since the #80 Metro bus provides

Wisconsin at Madison, University of

371

Wisconsin #include gcc  

E-Print Network (OSTI)

_time.tv_sec = current_time.tv_sec + 2; /* convert from micro to nano */ timeout_time.tv_nsec = current_time.tv_usec

Liblit, Ben

372

P and n-type microcrystalline semiconductor alloy material including band gap widening elements, devices utilizing same  

DOE Patents (OSTI)

An n-type microcrystalline semiconductor alloy material including a band gap widening element; a method of fabricating p-type microcrystalline semiconductor alloy material including a band gap widening element; and electronic and photovoltaic devices incorporating said n-type and p-type materials.

Guha, Subhendu (Troy, MI); Ovshinsky, Stanford R. (Bloomfield Hills, MI)

1988-10-04T23:59:59.000Z

373

Electrolytic/fuel cell bundles and systems including a current collector in communication with an electrode thereof  

DOE Patents (OSTI)

Electrolytic/fuel cell bundles and systems including such bundles include an electrically conductive current collector in communication with an anode or a cathode of each of a plurality of cells. A cross-sectional area of the current collector may vary in a direction generally parallel to a general direction of current flow through the current collector. The current collector may include a porous monolithic structure. At least one cell of the plurality of cells may include a current collector that surrounds an outer electrode of the cell and has at least six substantially planar exterior surfaces. The planar surfaces may extend along a length of the cell, and may abut against a substantially planar surface of a current collector of an adjacent cell. Methods for generating electricity and for performing electrolysis include flowing current through a conductive current collector having a varying cross-sectional area.

Hawkes, Grant L.; Herring, James S.; Stoots, Carl M.; O& #x27; Brien, James E.

2013-03-05T23:59:59.000Z

374

A TIME ACCURATE PREDICTION OF THE VISCOUS FLOW IN A TURBINE STAGE INCLUDING A ROTOR IN MOTION.  

E-Print Network (OSTI)

??AbstractA TIME ACCURATE PREDICTION OF THE VISCOUS FLOW IN A TURBINE STAGE INCLUDING A ROTOR IN MOTIONBy Akamol ShavalikulThe actual flow field in a turbine… (more)

Shavalikul, Akamol

2009-01-01T23:59:59.000Z

375

Echolocation-based foraging by harbor porpoises and sperm whales, including effects of noise and acoustic propagation  

E-Print Network (OSTI)

In this thesis, I provide quantitative descriptions of toothed whale echolocation and foraging behavior, including assessment of the effects of noise on foraging behavior and the potential influence of ocean acoustic ...

DeRuiter, Stacy L

2008-01-01T23:59:59.000Z

376

An Inferred Climatology of Icing Conditions Aloft, Including Supercooled Large Drops. Part II: Europe, Asia, and the Globe  

Science Conference Proceedings (OSTI)

Because of a lack of regular, direct measurements, limited information is available about the frequency and the spatial and temporal distribution of icing conditions aloft, including supercooled large drops (SLD). Research aircraft provide in ...

Ben C. Bernstein; Christine Le Bot

2009-08-01T23:59:59.000Z

377

An Inferred Climatology of Icing Conditions Aloft, Including Supercooled Large Drops. Part I: Canada and the Continental United States  

Science Conference Proceedings (OSTI)

Because of a lack of regular, direct measurements, little information is available about the frequency and spatial and temporal distribution of icing conditions aloft, including supercooled large drops (SLD). Research aircraft provide in situ ...

Ben C. Bernstein; Cory A. Wolff; Frank McDonough

2007-11-01T23:59:59.000Z

378

A Diagnostic Method for Computing the Surface Wind from the Geostrophic Wind Including the Effects of Baroclinity  

Science Conference Proceedings (OSTI)

A diagnostic procedure to compute the surface wind from the geostrophic wind including the effects of baroclinity is designed and tested. Expressions are derived to calculate the similarity functions A and B for use when only the surface ...

Maurice Danard

1988-12-01T23:59:59.000Z

379

Purchasing in PBIO: Any emergency orders must include justification as to why it is an emergency and should be  

E-Print Network (OSTI)

Purchasing in PBIO: Any emergency orders must include justification as to why it is an emergency of justification for emergency purchase in the Internal Notes area under "Review." If a shopper only, you

Arnold, Jonathan

380

Hot Water Electric Energy Use in Single-Family Residences in the Pacific Northwest : Regional End-Use Metering Project (REMP).  

SciTech Connect

The Office of Energy Resources of the Bonneville Power Administration carriers out generation and conservation resource planning. The analysis of historical trends in and determinants of energy consumption is carried out by the office's End-Use Research Section. The End-Use Research Section operates a comprehensive data collection program to provide pertinent information to support demand-side conservation planning, load forecasting, and conservation program development and delivery. Part of this on-going program, commonly known as the End-Use Load and Consumer Assessment Program (ELCAP), was recently renamed the Regional End-Use Metering Project (REMP) to reflect an emphasis on metering rather than analytical activities. REMP is designed to collect electricity usage data through direct monitoring of end-use loads in buildings in the residential and commercial sectors and is conducted for Bonneville by Pacific Northwest Laboratories (Battelle). The detailed summary information in this report is on energy used for water heaters in the residential sector and is based on data collected from September 1985 through December 1990 for 336 of the 499 REMP metered homes. Specific information is provided on annual loads averaged over the years and their variation across residences. Descriptions are given of use as associated with demographic and energy-related characteristics. Summaries are also provided for electricity use by each year, month, and daytype, as well as at peak hot water load and peak system times. This is the second residential report. This report focuses on a specific end use and adds detail to the first report. Subsequent reports are planned on other individual end uses or sets of end uses. 15 refs., 29 figs., 10 tabs.

Taylor, Megan E., Ritland, Keith G., Pratt, R.G.

1991-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Optimum utilization of site energy sources for all-season thermal comfort in new residential construction for single-family attached (rowhouse/townhouse) designs  

DOE Green Energy (OSTI)

A proposed design analysis is presented of a passive solar energy efficient system for a typical three-level, three bedroom, two story, garage-under townhouse. The design incorporates the best, most performance-proven and cost effective products, materials, processes, technologies, and sub-systems which are available today. Seven distinct categories recognized for analysis are identified as: the exterior environment; the interior environment; conservation of energy; natural energy utilization; auxiliary energy utilization; control and distribution systems; and occupant adaptation. Preliminary design features, fenestration sysems, the plenum-supply system, the thermal-storage party-fire walls, direct gain storage, the radiant comfort system, and direct passive cooling systems are briefly described. Features of the design under analysis and on which conclusions have not yet been formulated are: the energy reclamation system, auxiliary energy back-up systems, the distribution system and operating modes, the control systems, and non-comfort energy systems and inputs. (MCW)

Not Available

1981-02-26T23:59:59.000Z

382

Development of a single-family absorption chiller for use in a solar heating and cooling system. Phase III, final report. Volume II  

DOE Green Energy (OSTI)

The appendices provide supporting information on: properties of a chemical system for solar fired, air-cooled absorption equipment, air-side performance of a one-inch tube, absorber plate-fin coil, listings of the programs used for simulation and data reduction, and evaluation of the Carrier 3-ton chiller in an integrated heating and cooling system. (LEW)

Reimann, R.C.; Biermann, W.J.

1984-10-01T23:59:59.000Z

383

Development of a single-family absorption chiller for use in a solar heating and cooling system. Phase III, final report. Volume I  

DOE Green Energy (OSTI)

This is a hardware oriented project to demonstrate the feasibility of the solar fired, air cooled, absorption cooling of residential and commercial buildings. Beginning with design accuracy property data on a new chemical system applicable to air cooled absorption equipment, a breadboard machine was constructed in order to gain experience with system dynamics, chemical stability and overall performance. Employing heat transfer data and operating characteristics obtained from the breadboard an attempt was made to design and build a first generation prototype. A problem with the first heat transfer additive used caused the absorber to operate unsatisfactorily. A second, more refined, prototype was designed, constructed and tested incorporating the previous experience and heat transfer data as well as a new heat transfer additive. Although this prototype did not quite meet design capacity (85%), it surpassed design COP (0.75 vs 0.72) and performed stably without the signs of chemical degradation present in the previous prototype. Two more identical machines are being operated during field test in actual solar systems. After the successful operation of the 10 kW machine, it was decided to design and construct a larger scaled-up prototype for use in commercial applications. An appropriate size seemed to be about 70 kW. After considerable design effort a satisfactory size and design was achieved and constructed. In general, the 70 kW machine behaved much like the 10 kW, again producing about 80% of capacity but with varying COP's (probably due to the transient nature of the testing).

Reimann, R.C.; Biermann, W.J.

1984-10-01T23:59:59.000Z

384

Heating energy measurements of single-family houses with attics containing radiant barriers in combustion with R-11 and R-30 ceiling insulation  

Science Conference Proceedings (OSTI)

Tests were conducted by Oak Ridge National Laboratory to determine the heating energy performance of two levels of fiberglass-batt attic insulation (R-11 and R-30) in combination with truss and horizontally installed radiant barriers. The tests, a continuation of work started in the summer of 1985, were conducted in three unoccupied ranch-style houses in Karns, Tennessee, during the winter of 1986-87. The measured results of the heating tests showed that a horizontal radiant barrier used with R-11 attic insulation reduced the house heating load by 9.3% compared with R-11 with no radiant barrier, while a truss barrier showed essentially no change in the heating load. Horizontal and truss barriers each reduced the heating load by 3.5% when added to R-30 attic insulation. Moisture condensed on the bottom of the horizontal barrier during cold early morning weather but usually dissipated in the warmer afternoon hours at Karns and left no accumulation in the insulation. Depending on the level of attic insulation, an annual heating and cooling HVAC savings ranging from $5 to $65 is estimated to be attainable when a radiant barrier is installed in the attic at Karns. 8 refs., 64 figs., 18 tabs.

Levins, W.P.; Karnitz, M.A.

1988-08-01T23:59:59.000Z

385

Hawaii Energy Resource Overviews. Volume 4. Impact of geothermal resource development in Hawaii (including air and water quality)  

DOE Green Energy (OSTI)

The environmental consequences of natural processes in a volcanic-fumerolic region and of geothermal resource development are presented. These include acute ecological effects, toxic gas emissions during non-eruptive periods, the HGP-A geothermal well as a site-specific model, and the geothermal resources potential of Hawaii. (MHR)

Siegel, S.M.; Siegel, B.Z.

1980-06-01T23:59:59.000Z

386

Chemical transformations are essential to all living organisms--and also to the manufacture of many products including fuels,  

E-Print Network (OSTI)

interests include plasma waste gasification, plasma torches, spectroscopy, plasma medicine, and holographic2512 IEEE TRANSACTIONS ON PLASMA SCIENCE, VOL. 36, NO. 5, OCTOBER 2008 Experimental Investigation-power microwave breakdown based on measured laser breakdown observations. Comparison of 193-nm laser

Kemner, Ken

387

Chemical Spills, Releases, Explosions, Exposures, or Injuries (includes corrosive, reactive, flammable, and toxic chemicals in solid, liquid or gas form)  

E-Print Network (OSTI)

Chemical Spills, Releases, Explosions, Exposures, or Injuries (includes corrosive, reactive, flammable, and toxic chemicals in solid, liquid or gas form) EHS Contact: Kate Lumley-Sapanski (kxl3@psu apply: When to Report: · All chemical exposures or explosions requiring medical attention must

Yener, Aylin

388

UW Madison Fleet Fiscal Year 2010 Rates: Fuel, maintenance and insurance costs are included. If fuel prices exceed the budgeted  

E-Print Network (OSTI)

UW Madison Fleet Fiscal Year 2010 Rates: Fuel, maintenance and insurance costs are included. If fuel prices exceed the budgeted amount by a significant margin, the rates will be amended with a fuel surcharge at that time and the change notice will be posted in the fleet web site, rates page. Some rate

Sheridan, Jennifer

389

This book is intended for a wide readership including engineers, ap plied mathematicians, computer scientists, and graduate students who  

E-Print Network (OSTI)

Preface This book is intended for a wide readership including engineers, ap­ plied mathematicians on the Lyapunov matrix equation. The book presents different techniques for solving and ana­ lyzing the algebraic interest. The book provides easy and quick references for the solution of many engineering and mathematical

Gajic, Zoran

390

Low-rank coal research annual report, July 1, 1989--June 30, 1990 including quarterly report, April--June 1990  

SciTech Connect

Research programs in the following areas are presented: control technology and coal preparation; advance research and technology development; combustion; liquefaction; and gasification. Sixteen projects are included. Selected items have been processed separately for inclusion in the Energy Science and Technology Database.

1990-11-01T23:59:59.000Z

391

arXiv:submit/0451583[physics.gen-ph]8Apr2012 Including Nuclear Degrees of Freedom in a Lattice  

E-Print Network (OSTI)

arXiv:submit/0451583[physics.gen-ph]8Apr2012 Including Nuclear Degrees of Freedom in a Lattice and Engineering, University of Engineering and Technology. Lahore, Pakistan Abstract. Motivated by many condensed matter and nuclear systems are described initially on the same footing. Since it may be possible

Williams, Brian C.

392

Well-balanced bicharacteristic-based scheme for multilayer shallow water flows including wet/dry fronts  

Science Conference Proceedings (OSTI)

The aim of this paper is to present a new well-balanced finite volume scheme for two-dimensional multilayer shallow water flows including wet/dry fronts. The ideas, presented here for the two-layer model, can be generalized to a multilayer case in a ... Keywords: Bicharacteristics, Evolution galerkin, Finite volume method, Two-layer shallow water, Well-balance, Wet/dry front

M. Dudzinski; M. Luká?Ová-Medvid'Ová

2013-02-01T23:59:59.000Z

393

Maximum-Intensity Volumes for Fast Contouring of Lung Tumors Including Respiratory Motion in 4DCT Planning  

Science Conference Proceedings (OSTI)

Purpose: To assess the accuracy of maximum-intensity volumes (MIV) for fast contouring of lung tumors including respiratory motion. Methods and Materials: Four-dimensional computed tomography (4DCT) data of 10 patients were acquired. Maximum-intensity volumes were constructed by assigning the maximum Hounsfield unit in all CT volumes per geometric voxel to a new, synthetic volume. Gross tumor volumes (GTVs) were contoured on all CT volumes, and their union was constructed. The GTV with all its respiratory motion was contoured on the MIV as well. Union GTVs and GTVs including motion were compared visually. Furthermore, planning target volumes (PTVs) were constructed for the union of GTVs and the GTV on MIV. These PTVs were compared by centroid position, volume, geometric extent, and surface distance. Results: Visual comparison of GTVs demonstrated failure of the MIV technique for 5 of 10 patients. For adequate GTV{sub MIV}s, differences between PTVs were <1.0 mm in centroid position, 5% in volume, {+-}5 mm in geometric extent, and {+-}0.5 {+-} 2.0 mm in surface distance. These values represent the uncertainties for successful MIV contouring. Conclusion: Maximum-intensity volumes are a good first estimate for target volume definition including respiratory motion. However, it seems mandatory to validate each individual MIV by overlaying it on a movie loop displaying the 4DCT data and editing it for possible inadequate coverage of GTVs on additional 4DCT motion states.

Rietzel, Eike [Department of Radiation Oncology, Massachusetts General Hospital, Harvard Medical School, Boston, MA (United States); Abteilung Biophysik, Gesellschaft fuer Schwerionenforschung, Darmstadt (Germany)], E-mail: eike@rietzel.net; Liu, Arthur K.; Chen, George T.Y.; Choi, Noah C. [Department of Radiation Oncology, Massachusetts General Hospital, Harvard Medical School, Boston, MA (United States)

2008-07-15T23:59:59.000Z

394

DISPOSAL OF TRU WASTE FROM THE PLUTONIUM FINISHING PLANT IN PIPE OVERPACK CONTAINERS TO WIPP INCLUDING NEW SECURITY REQUIREMENTS  

Science Conference Proceedings (OSTI)

The Department of Energy is responsible for the safe management and cleanup of the DOE complex. As part of the cleanup and closure of the Plutonium Finishing Plant (PFP) located on the Hanford site, the nuclear material inventory was reviewed to determine the appropriate disposition path. Based on the nuclear material characteristics, the material was designated for stabilization and packaging for long term storage and transfer to the Savannah River Site or, a decision for discard was made. The discarded material was designated as waste material and slated for disposal to the Waste Isolation Pilot Plant (WIPP). Prior to preparing any residue wastes for disposal at the WIPP, several major activities need to be completed. As detailed a processing history as possible of the material including origin of the waste must be researched and documented. A technical basis for termination of safeguards on the material must be prepared and approved. Utilizing process knowledge and processing history, the material must be characterized, sampling requirements determined, acceptable knowledge package and waste designation completed prior to disposal. All of these activities involve several organizations including the contractor, DOE, state representatives and other regulators such as EPA. At PFP, a process has been developed for meeting the many, varied requirements and successfully used to prepare several residue waste streams including Rocky Flats incinerator ash, Hanford incinerator ash and Sand, Slag and Crucible (SS&C) material for disposal. These waste residues are packed into Pipe Overpack Containers for shipment to the WIPP.

Hopkins, A.M.; Sutter, C.; Hulse, G.; Teal, J.

2003-02-27T23:59:59.000Z

395

Geothermal Exploration and Assessment Technology Program (review), including a report of the Reservoir Engineering Technical Advisory Group  

DOE Green Energy (OSTI)

The FY 1979 Program, recommended seismic surveys in conjunction with DOE/DGE's industry coupled program in the Northern Basin and Range Province, and the objectives of the Marina del Rey conference are presented. Final reports of six committees which met to define the state-of-the-art in geothermal exploration and to recommend exploration technology development are included. These committees are: structure, stratigraphy, and igneous processes; exploration architecture; electrical methods; seismic methods; thermal methods; water/rock interaction; and reservoir engineering. (MHR)

Nielson, D.L. (ed.)

1979-12-01T23:59:59.000Z

396

Ames/Salmonella mutagenicity assay of natural and synthetic crude oils including a Fischer-Retorted Estonian shale oil  

DOE Green Energy (OSTI)

DMSO extracts of a variety of natural and synthetic crude oils were tested for genotoxic activity in the Ames/Salmonella bioassay. Both mutagenic and cytotoxic potentials are cited. Natural crude oils and their refined products and upgraded synfuels are less mutagenic than parent crude shale oils which in turn are less mutagenic than the coal derived distillate blend sample, SRC II. However, this order is not true for cytotoxicity induced by these oil samples; therefore, caution must be exercised in the assessment of their mutagenic potential without consideration of other influential factors including cytotoxicity.

Strniste, G.F.; Nickols, J.W.

1981-01-01T23:59:59.000Z

397

Computation of Domain-Averaged Irradiance with a Simple Two-Stream Radiative Transfer Model Including Vertical Cloud Property Correlations  

NLE Websites -- All DOE Office Websites (Extended Search)

Computation of Domain-Averaged Irradiance Computation of Domain-Averaged Irradiance with a Simple Two-Stream Radiative Transfer Model Including Vertical Cloud Property Correlations S. Kato Center for Atmospheric Sciences Hampton University Hampton, Virginia Introduction Recent development of remote sensing instruments by Atmospheric Radiation Measurement (ARM?) Program provides information of spatial and temporal variability of cloud structures. However it is not clear what cloud properties are required to express complicated cloud fields in a realistic way and how to use them in a relatively simple one-dimensional (1D) radiative transfer model to compute the domain averaged irradiance. To address this issue, a simple shortwave radiative transfer model that can treat the vertical cloud optical property correlation is developed. The model is based on the gamma-weighted

398

Level: National Data; Row: End Uses within NAICS Codes; Column: Energy Sources, including Net Demand for Electricity;  

U.S. Energy Information Administration (EIA) Indexed Site

4 End Uses of Fuel Consumption, 2006; 4 End Uses of Fuel Consumption, 2006; Level: National Data; Row: End Uses within NAICS Codes; Column: Energy Sources, including Net Demand for Electricity; Unit: Trillion Btu. Distillate Fuel Oil Coal NAICS Net Demand Residual and LPG and (excluding Coal Code(a) End Use for Electricity(b) Fuel Oil Diesel Fuel(c) Natural Gas(d) NGL(e) Coke and Breeze) Total United States 311 - 339 ALL MANUFACTURING INDUSTRIES TOTAL FUEL CONSUMPTION 3,335 251 129 5,512 79 1,016 Indirect Uses-Boiler Fuel 84 133 23 2,119 8 547 Conventional Boiler Use 84 71 17 1,281 8 129 CHP and/or Cogeneration Process 0 62 6 838 1 417 Direct Uses-Total Process 2,639 62 52 2,788 39 412 Process Heating 379 59 19 2,487 32 345 Process Cooling and Refrigeration

399

Workplan for FY1978 to FY1982 including a computerized reporting and monitoring system for geothermal energy development  

DOE Green Energy (OSTI)

It is proposed that the on-going compilation and critical evaluation of data be expanded to include a computerized system for monitoring and reporting the development of geothermal resources from the discovery phase to power on-line. Data would be covered which is site-specific and therefore unique to the geothermal area. Computer printouts are to contain a listing of each geothermal site which will be classified according to the status of development for producing electrical power. The result of the work will consist of a report containing a description of the data at each site and recommendaions for additional data needs in technological, economic, or institutional areas. The computerized system will allow for ease in updating and remote accessing by off-site users.

Phillips, S.L.; Tavana, M.; Leung, K.; Steyer, M.; Palen, W.A.; Schwartz, S.R.

1978-12-01T23:59:59.000Z

400

Solar heating and hot water system installed at the Senior Citizen Center, Huntsville, Alabama. [Includes engineering drawings  

DOE Green Energy (OSTI)

Information is provided on the solar energy system installed at the Huntsville Senior Citizen Center. The solar space heating and hot water facility and the project involved in its construction are described in considerable detail and detailed drawings of the complete system and discussions of the planning, the hardware, recommendations, and other pertinent information are included. The facility was designed to provide 85 percent of the hot water and 85 percent of the space heating requirements. Two important factors concerning this project for commercial demonstration are the successful use of silicon oil as a heat transfer fluid and the architecturally aesthetic impact of a large solar energy system as a visual centerpoint. There is no overheat or freeze protection due to the characteristics of the silicon oil and the design of the system. Construction proceeded on schedule with no cost overruns. It is designed to be relatively free of scheduled maintenance, and has experienced practically no problems.

Not Available

1980-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Energy star compliant voice over internet protocol (VoIP) telecommunications network including energy star compliant VoIP devices  

DOE Patents (OSTI)

A Voice over Internet Protocol (VoIP) communications system, a method of managing a communications network in such a system and a program product therefore. The system/network includes an ENERGY STAR (E-star) aware softswitch and E-star compliant communications devices at system endpoints. The E-star aware softswitch allows E-star compliant communications devices to enter and remain in power saving mode. The E-star aware softswitch spools messages and forwards only selected messages (e.g., calls) to the devices in power saving mode. When the E-star compliant communications devices exit power saving mode, the E-star aware softswitch forwards spooled messages.

Kouchri, Farrokh Mohammadzadeh

2012-11-06T23:59:59.000Z

402

UPDATE February 2012 - The Food Crises: Predictive validation of a quantitative model of food prices including speculators and ethanol conversion  

E-Print Network (OSTI)

Increases in global food prices have led to widespread hunger and social unrest---and an imperative to understand their causes. In a previous paper published in September 2011, we constructed for the first time a dynamic model that quantitatively agreed with food prices. Specifically, the model fit the FAO Food Price Index time series from January 2004 to March 2011, inclusive. The results showed that the dominant causes of price increases during this period were investor speculation and ethanol conversion. The model included investor trend following as well as shifting between commodities, equities and bonds to take advantage of increased expected returns. Here, we extend the food prices model to January 2012, without modifying the model but simply continuing its dynamics. The agreement is still precise, validating both the descriptive and predictive abilities of the analysis. Policy actions are needed to avoid a third speculative bubble that would cause prices to rise above recent peaks by the end of 2012.

Lagi, Marco; Bertrand, Karla Z; Bar-Yam, Yaneer

2012-01-01T23:59:59.000Z

403

Practical method for including material scattering effects in determining the amount of intercepted sunlight in solar concentrators  

DOE Green Energy (OSTI)

In imaging solar concentrators, the amount of solar radiation incident on a receiver surface depends upon both the overall concentrator shape and the angular distribution of light rays (sunshape) that reach the receiver. Sunshape broadening effects, which include the specular reflectance or transmittance properties of mirrors or glazings, image degradation caused by surface slope errors, and tracking errors are combined into an effective error cone. Broadened sunshapes for a variety of effective error-cone distributions are calculated and presented in graphical form. It is found that when the root-mean-square (RMS) width of the effective error cone is approximately 2 to 3 times the RMS width of the incident sunshape, the broadened sunshape can be adequately described by a circular normal distribution.

Pettit, R.B.; Vittitoe, C.N.; Biggs, F.

1979-01-01T23:59:59.000Z

404

Level: National Data; Row: End Uses within NAICS Codes; Column: Energy Sources, including Net Demand for Electricity;  

U.S. Energy Information Administration (EIA) Indexed Site

Next MECS will be conducted in 2010 Next MECS will be conducted in 2010 Table 5.3 End Uses of Fuel Consumption, 2006; Level: National Data; Row: End Uses within NAICS Codes; Column: Energy Sources, including Net Demand for Electricity; Unit: Physical Units or Btu. Distillate Coal Fuel Oil (excluding Coal Net Demand Residual and Natural Gas(d) LPG and Coke and Breeze) NAICS for Electricity(b) Fuel Oil Diesel Fuel(c) (billion NGL(e) (million Code(a) End Use (million kWh) (million bbl) (million bbl) cu ft) (million bbl) short tons) Total United States 311 - 339 ALL MANUFACTURING INDUSTRIES TOTAL FUEL CONSUMPTION 977,338 40 22 5,357 21 46 Indirect Uses-Boiler Fuel 24,584 21 4 2,059 2 25 Conventional Boiler Use 24,584 11 3

405

RBDMS user`s guide which includes the RBDMS administrative guide, Version 4.0. Appendix A  

Science Conference Proceedings (OSTI)

RBDMS (Risk Based Data Management System) is an oil and gas electronic data management system which stems from the idea developed from four previous projects conducted by the American Petroleum Institute (API) and the Ground Water Protection Council (GWPC). The first study studied oil and gas industry injection well corrosion. It included a methodology for assessing the probability of contaminating underground sources of drinking water (USDWs) via Class 2 injection well operations. A feasibility study was conducted to investigate if an electronic data management system could incorporate the methodology. A second feasibility study was conducted to test the methodology on a much small basis. The RBDMS effort then continued through a grant from DOE with a multi-task project consisting of an inventory and needs assessment of 25 oil and gas producing states pertaining to oil and gas production/regulatory activities, state geological/hydrogeological considerations, Class 2 underground injection activities, electronic data management needs and functional requirements, environmental risk assessment and management objectives, resultant benefit of a RBDMS, and various information and data required for the design and development of a RBDMS in individual states. This appendix contains the documentation for the use of the RBDMS.

NONE

1995-03-01T23:59:59.000Z

406

Dye lasing arrangement including an optical assembly for altering the cross-section of its pumping beam and method  

SciTech Connect

An optical assembly is disclosed herein along with a method of operation for use in a dye lasing arrangement, for example a dye laser oscillator or a dye amplifier, in which a continuous stream of dye is caused to flow through a given zone in a cooperating dye chamber while the zone is being illuminated by light from a pumping beam which is directed into the given zone. This in turn causes the dye therein to lase and thereby produce a new dye beam in the case of a dye laser oscillator or amplify a dye beam in the case of a dye amplifier. The optical assembly so disclosed is designed to alter the pump beam such that the beam enters the dye chamber with a different cross-sectional configuration, preferably one having a more uniform intensity profile, than its initially produced cross-sectional configuration. To this end, the assembly includes a network of optical components which first act on the beam while the latter retains its initially produced cross-sectional configuration for separating it into a plurality of predetermined segments and then recombines the separated components in a predetermined way which causes the recombined beam to have the different cross-sectional configuration.

O' Neil, Richard W. (Pleasanton, CA); Sweatt, William C. (Alburquerque, NM)

1992-01-01T23:59:59.000Z

407

Method for contamination control and barrier apparatus with filter for containing waste materials that include dangerous particulate matter  

DOE Patents (OSTI)

A container for hazardous waste materials that includes air or other gas carrying dangerous particulate matter has incorporated barrier material, preferably in the form of a flexible sheet, and one or more filters for the dangerous particulate matter sealably attached to such barrier material. The filter is preferably a HEPA type filter and is preferably chemically bonded to the barrier materials. The filter or filters are preferably flexibly bonded to the barrier material marginally and peripherally of the filter or marginally and peripherally of air or other gas outlet openings in the barrier material, which may be a plastic bag. The filter may be provided with a backing panel of barrier material having an opening or openings for the passage of air or other gas into the filter or filters. Such backing panel is bonded marginally and peripherally thereof to the barrier material or to both it and the filter or filters. A coupling or couplings for deflating and inflating the container may be incorporated. Confining a hazardous waste material in such a container, rapidly deflating the container and disposing of the container, constitutes one aspect of the method of the invention. The chemical bonding procedure for producing the container constitutes another aspect of the method of the invention. 3 figs.

Pinson, P.A.

1998-02-24T23:59:59.000Z

408

Construction Price Indexes | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Price Indexes Price Indexes BusinessUSA Data/Tools Apps Challenges Let's Talk BusinessUSA You are here Data.gov » Communities » BusinessUSA » Data Construction Price Indexes Dataset Summary Description The Construction Price Indexes provide price indexes for single-family houses sold and for single-family houses under construction. The houses sold index incorporates the value of the land and is available quarterly at the national level and annually by region. The indexes for houses under construction are available monthly at the national level. The indexes are based on data funded by HUD and collected in the Survey of Construction (SOC). Tags {Laspeyres,Constant,Quality,Paasche,Output,Deflator,Fisher,Ideal,Index,absorption,apartment,authorized,authorization,build,building,built,characteristic,completed,completion,construction,contract,contractor,cost,development,dwelling,economic,existing,expenditures,family,financing,finished,floor,home,house,houses,housing,hud,indicator,index,issue,issuing,living,manufactured,market,metropolitan,microdata,month,multifamily,multiple,new,nonresidential,occupancy,occupants,occupied,office,one-unit,owner,permanent,permit,permits,price,private,privately-owned,public,quarters,rebuilt,region,regional,rent,rental,residential,rural,sale,sectional,single,single-family,site-built,size,sold,speculative,spending,stage,started,starts,structure,timeshare,under,unit,units,urban,u.s.,vacancy,valuation,zoning}

409

Performance of Trasuranic-Loaded Fully Ceramic Micro-Encapsulated Fuel in LWRs Interim Report, Including Void Reactivity Evaluation  

Science Conference Proceedings (OSTI)

The current focus of the Deep Burn Project is on once-through burning of transuranice (TRU) in light water reactors (LWRs). The fuel form is called Fully-Ceramic Micro-encapsulated (FCM) fuel, a concept that borrows the tri-isotropic (TRISO) fuel particle design from high-temperature reactor technology. In the Deep Burn LWR (DB-LWR) concept, these fuel particles would be pressed into compacts using SiC matrix material and loaded into fuel pins for use in conventional LWRs. The TRU loading comes from the spent fuel of a conventional LWR after 5 years of cooling. Unit cell calculations have been performed using the DRAGON-4 code in order assess the physics attributes of TRU-only FCM fuel in an LWR lattice. Depletion calculations assuming an infinite lattice condition were performed with calculations of various reactivity coefficients performed at each step. Unit cells containing typical UO2 and MOX fuel were analyzed in the same way to provide a baseline against which to compare the TRU-only FCM fuel. Loading of TRU-only FCM fuel into a pin without significant quantities of uranium challenges the design from the standpoint of several key reactivity parameters, particularly void reactivity, and to some degree, the Doppler coefficient. These unit cells, while providing an indication of how a whole core of similar fuel would behave, also provide information of how individual pins of TRU-only FCM fuel would influence the reactivity behavior of a heterogeneous assembly. If these FCM fuel pins are included in a heterogeneous assembly with LEU fuel pins, the overall reactivity behavior would be dominated by the uranium pins while attractive TRU destruction performance of the TRU-only FCM fuel pins may be preserved. A configuration such as this would be similar to CONFU assemblies analyzed in previous studies. Analogous to the plutonium content limits imposed on MOX fuel, some amount of TRU-only FCM pins in an otherwise-uranium fuel assembly may give acceptable reactivity performance. Assembly calculations will be performed in future work to explore the design options for heterogeneous assemblies of this type and their impact on reactivity coefficients.

Michael A. Pope; Brian Boer; Gilles Youinou; Abderrafi M. Ougouag

2011-03-01T23:59:59.000Z

410

Implication of a covenant to diligently develop and mine in hard mineral leases that provide for minimum rents or royalties  

SciTech Connect

An examination of the status of the implied covenant to develop in hard mineral leases which contain minimum royalty provisions discusses the rationale for the implied development covenant, restrictions on its use, and scenarios under which mining delays occur. Later sections delineate the rules of construction and interpretative tests used in various mining jurisdictions. The author then analyzes the logic of these tests in light of the regulatory and economic climate of today's mining industry. He finds that this climate forces prudent mining companies to delay mine development in many instances. The substantial relation test considers all factors that are indicative of the original parties expectations; the demand for development rule does not.

Bender, J.C.

1987-01-01T23:59:59.000Z

411

Tucson- Solar Design Requirement for Homes  

Energy.gov (U.S. Department of Energy (DOE))

Tucson adopted an ordinance in June 2008 that requires all new single-family homes and duplexes in Tucson to be "solar-ready." The ordinance was developed by a stakeholder group which included...

412

City of Tallahassee Utilities - Energy Star Certified New Homes...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

City of Tallahassee Utilities offers a rebate of 1 per square foot (up to 2,000) for ENERGY STAR qualified new homes. Qualifying housing types include single-family detached,...

413

Now includes video! A Haunting  

E-Print Network (OSTI)

discussions on Micro-LEDs, Surface Acoustic Wave and Photocapacitive Sensors, Circadian Rhythm, and Indoor.' There were some interesting observations regarding the gradual appearance of LED lighting systems) students One of the innate properties of an incandescent bulb is that when it is dimmed, its color

Rogers, John A.

414

Subsurface stratigraphy and petrophysical analysis of the Middle Devonian interval, including the Marcellus Shale, of the central Appalachian basin; northwestern Pennsylvania.  

E-Print Network (OSTI)

??In the central Appalachian basin, the multiple organic-rich intervals of the Middle Devonian, including the Marcellus Shale, are an emerging large resource play with high… (more)

Yanni, Anne.

2010-01-01T23:59:59.000Z

415

Solar heating and cooling system design and development. Status summary, April--June 1978  

DOE Green Energy (OSTI)

Information is provided on the development of eight prototype solar heating and combined heating and cooling systems. This effort includes development, manufacture, test, installation, maintenance, problem resolution, and monitoring the operation of prototype systems. The program currently consists of development of heating and cooling equipment for single-family residential and commercial applications and eight operational test sites (four heating and four heating and cooling). Four are single-family residences and four are commercial buildings.

Not Available

1978-07-01T23:59:59.000Z

416

Omega-3 Oils: Applications in Functional FoodsChapter 3 Fish Sources of Various Lipids Including n-3 Polyunsaturated Fatty Acids and Their Dietary Effects  

Science Conference Proceedings (OSTI)

Omega-3 Oils: Applications in Functional Foods Chapter 3 Fish Sources of Various Lipids Including n-3 Polyunsaturated Fatty Acids and Their Dietary Effects Health Nutrition Biochemistry eChapters Health - Nutrition - Biochemistry 448930

417

Zebrafish homologs of 16p11.2, a genomic region associated with brain disorders, are active during brain development, and include two deletion dosage sensor genes  

E-Print Network (OSTI)

Deletion or duplication of one copy of the human 16p11.2 interval is tightly associated with impaired brain function, including autism spectrum disorders (ASDs), intellectual disability disorder (IDD) and other phenotypes, ...

Blaker-Lee, Alicia

418

The contact-temperature ignition (CTI) criteria for propagating chemical reactions including the effect of moisture and application to Hanford waste  

SciTech Connect

To assure the continued absence of uncontrolled condensed-phase chemical reactions in connection with the Hanford waste materials, efforts have been underway including both theoretical and experimental investigations to clarify the requirements for such reactions. This document defines the differences and requirements for homogeneous runaway and propagating chemical reactions incuding a discussion of general contact-temperature ignition (CTI) condition for propagating reactions that include the effect of moisture. The CTI condition implies that the contact temperature or interface temperature between reacted and unreacted materials must exceed the ignition temperature and is compared to experimental data including both synthetic ferrocyanide and surrogate organic materials. In all cases, the occurrences of ignition accompanied by self-propagating reactions are consistent with the theoretical anticipations of the CTI condition.

Cash, R.J.

1995-09-27T23:59:59.000Z

419

FULL-SCALE, WIND TUNNEL AND CFD WIND ENGINEERING STUDIES A variety of methods can be used to obtain wind engineering design information. These include  

E-Print Network (OSTI)

FULL-SCALE, WIND TUNNEL AND CFD WIND ENGINEERING STUDIES A variety of methods can be used to obtain wind engineering design information. These include codes of practice, full-scale, wind tunnel are listed in the table below: Table 1. Relative advantages and disadvantages of wind engineering techniques

Savory, Eric

420

Planar optical waveguide based sandwich assay sensors and processes for the detection of biological targets including protein markers, pathogens and cellular debris  

DOE Patents (OSTI)

An assay element is described including recognition ligands bound to a film on a single mode planar optical waveguide, the film from the group of a membrane, a polymerized bilayer membrane, and a self-assembled monolayer containing polyethylene glycol or polypropylene glycol groups therein and an assay process for detecting the presence of a biological target is described including injecting a biological target-containing sample into a sensor cell including the assay element, with the recognition ligands adapted for binding to selected biological targets, maintaining the sample within the sensor cell for time sufficient for binding to occur between selected biological targets within the sample and the recognition ligands, injecting a solution including a reporter ligand into the sensor cell; and, interrogating the sample within the sensor cell with excitation light from the waveguide, the excitation light provided by an evanescent field of the single mode penetrating into the biological target-containing sample to a distance of less than about 200 nanometers from the waveguide thereby exciting the fluorescent-label in any bound reporter ligand within a distance of less than about 200 nanometers from the waveguide and resulting in a detectable signal.

Martinez, Jennifer S. (Santa Fe, NM); Swanson, Basil I. (Los Alamos, NM); Grace, Karen M. (Los Alamos, NM); Grace, Wynne K. (Los Alamos, NM); Shreve, Andrew P. (Santa Fe, NM)

2009-06-02T23:59:59.000Z

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Wireless Power May Cut the Cord for Plug-In Devices, Including Cars1 by Will Ferguson for National Geographic News, abbreviated2  

E-Print Network (OSTI)

Wireless Power May Cut the Cord for Plug-In Devices, Including Cars1 by Will Ferguson for National no power cord, a car fueled by a cordless panel in the floor:4 In a nondescript building just outside Boston, these and other applications of wireless electricity signal a future with fewer snaking5 cables.6

South Bohemia, University of

422

To be included in this de"nition, the organic matter must be derived from a renewable source of biomass such as sustained yield forestry or  

E-Print Network (OSTI)

/ Energy Policy 29 (2001) 263}277 #12; Australia's proposed RPS includes credits for solar water heaters of Resource and Environmental Management, Simon Fraser University, Vancouver, BC, Canada V5A 1S6 Received 6 July 2000 Abstract Renewables have social and environmental bene"ts compared to conventional

423

Food Tech Lab -Ingram Hall Dr. Sathivel/Dr. Joongmin Shin Pilot equipment in the Food Tech lab includes mechanical separators and desinewers, centrifuge,  

E-Print Network (OSTI)

includes mechanical separators and desinewers, centrifuge, grinders, Koch SS Grinder, flaker, tumbler and incubator for total plate microbial counts, centrifugation for separation, high speed explosion- proof, portable gas analyzer (O2, CO2, CO). Fruits and Vegetable Processing Equipment ­ Julian C. Miller Hall - Dr

Harms, Kyle E.

424

DOE Order Self Study Modules - DOE O 440.1B, Worker Protection Management for DOE (Including the National Nuclear Security Administration) Federal Employees  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0.1B 0.1B WORKER PROTECTION PROGRAM FOR DOE (INCLUDING THE NATIONAL NUCLEAR SECURITY ADMINISTRATION) FEDERAL EMPLOYEES DOE O 440.1B Familiar Level June 2011 1 DOE O 440.1B WORKER PROTECTION MANAGEMENT FOR DOE (INCLUDING THE NATIONAL NUCLEAR SECURITY ADMINISTRATION) FEDERAL EMPLOYEES FAMILIAR LEVEL OBJECTIVES Given the familiar level of this module and the resources listed below, you will be able to answer the following questions: 1. What are the objectives of DOE O 440.1B? 2. What are the requirements that DOE elements must meet according to DOE O 440.1B? 3. What is the hazard prevention/abatement process that must be implemented according to DOE O 440.1B? 4. What are three responsibilities assigned by DOE O 440.1B for heads of field elements?

425

Corrective Action Investigation Plan for Corrective Action Unit 204: Storage Bunkers, Nevada Test Site, Nevada (December 2002, Revision No.: 0), Including Record of Technical Change No. 1  

SciTech Connect

The Corrective Action Investigation Plan contains the U.S. Department of Energy, National Nuclear Security Administration Nevada Operations Office's approach to collect the data necessary to evaluate corrective action alternatives appropriate for the closure of Corrective Action Unit (CAU) 204 under the Federal Facility Agreement and Consent Order. Corrective Action Unit 204 is located on the Nevada Test Site approximately 65 miles northwest of Las Vegas, Nevada. This CAU is comprised of six Corrective Action Sites (CASs) which include: 01-34-01, Underground Instrument House Bunker; 02-34-01, Instrument Bunker; 03-34-01, Underground Bunker; 05-18-02, Chemical Explosives Storage; 05-33-01, Kay Blockhouse; 05-99-02, Explosive Storage Bunker. Based on site history, process knowledge, and previous field efforts, contaminants of potential concern for Corrective Action Unit 204 collectively include radionuclides, beryllium, high explosives, lead, polychlorinated biphenyls, total petroleum hydrocarbons, silver, warfarin, and zinc phosphide. The primary question for the investigation is: ''Are existing data sufficient to evaluate appropriate corrective actions?'' To address this question, resolution of two decision statements is required. Decision I is to ''Define the nature of contamination'' by identifying any contamination above preliminary action levels (PALs); Decision II is to ''Determine the extent of contamination identified above PALs. If PALs are not exceeded, the investigation is completed. If PALs are exceeded, then Decision II must be resolved. In addition, data will be obtained to support waste management decisions. Field activities will include radiological land area surveys, geophysical surveys to identify any subsurface metallic and nonmetallic debris, field screening for applicable contaminants of potential concern, collection and analysis of surface and subsurface soil samples from biased locations, and step-out sampling to define the extent of contamination, as necessary. The results of this field investigation will support a defensible evaluation of corrective action alternatives in the corrective action decision document.

NNSA /NSO

2002-12-12T23:59:59.000Z

426

Commissioning of a Soft X-ray Beamline PF-BL-16A with a Variable-Included-Angle Varied-Line-Spacing Grating Monochromator  

Science Conference Proceedings (OSTI)

The design and commissioning of a new soft X-ray beamline, BL-16A, at the Photon Factory is presented. The beamline consists of a pre-focusing mirror, an entrance slit, a variable-included-angle varied-line-spacing plane grating monochromator, and a post-focusing system as usual, and provides circularly and linearly polarized soft X rays in the energy range 200-1500 eV with an APPLE-II type undulator. The commissioning procedure for the beamline optics is described in detail, especially the check of the focal position for the zero-th order and diffracted X rays.

Amemiya, Kenta; Toyoshima, Akio; Kikuchi, Takashi; Kosuge, Takashi; Nigorikawa, Kazuyuki; Sumii, Ryohei; Ito, Kenji [Institute of Materials Structure Science, High Energy Accelerator Research Organization, 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan)

2010-06-23T23:59:59.000Z

427

Method Of Bonding A Metal Connection To An Electrode Including A Core Having A Fiber Or Foam Type Structure For An Electrochemical Cell, An  

DOE Patents (OSTI)

A method of bonding a metal connection to an electrode including a core having a fiber or foam-type structure for an electrochemical cell, in which method at least one metal strip is pressed against one edge of the core and is welded thereto under compression, wherein, at least in line with the region in which said strip is welded to the core, which is referred to as the "main core", a retaining core of a type analogous to that of the main core is disposed prior to the welding.

Loustau, Marie-Therese (Bordeaux, FR); Verhoog, Roelof (Bordeaux, FR); Precigout, Claude (Lormont, FR)

1996-09-24T23:59:59.000Z

428

FORMALISM FOR INCLUSION OF MEASURED REACTION CROSS SECTIONS IN STELLAR RATES INCLUDING UNCERTAINTIES AND ITS APPLICATION TO NEUTRON CAPTURE IN THE s-PROCESS  

Science Conference Proceedings (OSTI)

A general formalism to include experimental reaction cross sections into calculations of stellar rates is presented. It also allows us to assess the maximally possible reduction of uncertainties in the stellar rates by experiments. As an example for the application of the procedure, stellar neutron capture reactivities from KADoNiS v0.3 are revised and the remaining uncertainties shown. Many of the uncertainties in the stellar rates are larger than those obtained experimentally. This has important consequences for s-process models and the interpretation of meteoritic data because it allows the rates of some reactions to vary within a larger range than previously assumed.

Rauscher, Thomas [Department of Physics, University of Basel, CH-4056 Basel (Switzerland)

2012-08-10T23:59:59.000Z

429

The Effect of CO2 Pricing on Conventional and Non- Conventional Oil Supply and Demand  

E-Print Network (OSTI)

assumes that nonconventional crude oil enters the market when conventional oil supply alone is unable to meet demand, and the social cost of CO2 is included in the calculation of the oil rent at that time. The results reveal the effect of a CO2 tax set...

Méjean, Aurélie; Hope, Chris

430

Approximating Buy-at-Bulk k-Steiner trees  

E-Print Network (OSTI)

In the buy-at-bulk $k$-Steiner tree (or rent-or-buy$k$-Steiner tree) problem we are given a graph $G(V,E)$ with a setof terminals $T\\subseteq V$ including a particular vertex $s$ calledthe root, and an integer $k\\leq |T|$. ...

Hajiaghayi, MohammadTaghi

2005-11-15T23:59:59.000Z

431

Journal of Power Sources 210 (2012) 286291 Contents lists available at SciVerse ScienceDirect  

E-Print Network (OSTI)

generation in wind and solar systems [3], charging of car batteries in electric and hybrid vehicles [4 l e i n f o Article history: Received 5 December 2011 Received in revised form 9 March 2012 Accepted by a variable cur- rent due to semi-stochastic power generation. Such applications include renewable electricity

Arnold, Craig B.

432

July 1, 2011 Page 1 of 64 FINANCIAL POLICIES  

E-Print Network (OSTI)

of petroleum and other energy resources, the substitution of cheaper alternatives, including solar and other production costs of marginal producers and user costs. User costs, which are also called Hotelling rents not be feasible. As a result, the energy required could be one or several orders of magnitude greater, also

433

Measure Guideline: Summary of Interior Ducts in New Construction, Including an Efficient, Affordable Method to Install Fur-Down Interior Ducts  

Science Conference Proceedings (OSTI)

This document illustrates guidelines for the efficient installation of interior duct systems in new housing, including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces. This document illustrates guidelines for the efficient installation of interior duct systems in new housing. Interior ducts result from bringing the duct work inside a home's thermal and air barrier. Architects, designers, builders, and new home buyers should thoroughly investigate any opportunity for energy savings that is as easy to implement during construction, such as the opportunity to construct interior duct work. In addition to enhanced energy efficiency, interior ductwork results in other important advantages, such as improved indoor air quality, increased system durability and increased homeowner comfort. While the advantages of well-designed and constructed interior duct systems are recognized, the implementation of this approach has not gained a significant market acceptance. This guideline describes a variety of methods to create interior ducts including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces. As communication of the intent of an interior duct system, and collaboration on its construction are paramount to success, this guideline details the critical design, planning, construction, inspection, and verification steps that must be taken. Involved in this process are individuals from the design team; sales/marketing team; and mechanical, insulation, plumbing, electrical, framing, drywall and solar contractors.

Beal, D.; McIlvaine , J.; Fonorow, K.; Martin, E.

2011-11-01T23:59:59.000Z

434

Application Of A New Semi-Empirical Model For Forming Limit Prediction Of Sheet Material Including Superposed Loads Of Bending And Shearing  

Science Conference Proceedings (OSTI)

The use of lightweight materials offers substantial strength and weight advantages in car body design. Unfortunately such kinds of sheet material are more susceptible to wrinkling, spring back and fracture during press shop operations. For characterization of capability of sheet material dedicated to deep drawing processes in the automotive industry, mainly Forming Limit Diagrams (FLD) are used. However, new investigations at the Institute for Metal Forming Technology have shown that High Strength Steel Sheet Material and Aluminum Alloys show increased formability in case of bending loads are superposed to stretching loads. Likewise, by superposing shearing on in plane uniaxial or biaxial tension formability changes because of materials crystallographic texture. Such mixed stress and strain conditions including bending and shearing effects can occur in deep-drawing processes of complex car body parts as well as subsequent forming operations like flanging. But changes in formability cannot be described by using the conventional FLC. Hence, for purpose of improvement of failure prediction in numerical simulation codes significant failure criteria for these strain conditions are missing. Considering such aspects in defining suitable failure criteria which is easy to implement into FEA a new semi-empirical model has been developed considering the effect of bending and shearing in sheet metals formability. This failure criterion consists of the combination of the so called cFLC (combined Forming Limit Curve), which considers superposed bending load conditions and the SFLC (Shear Forming Limit Curve), which again includes the effect of shearing on sheet metal's formability.

Held, Christian [Hochschul Institute Neckarsulm, Gottlieb-Daimler-Strasse 40, 74172 Neckarsulm (Germany); Liewald, Mathias; Schleich, Ralf [Institute for Metal Forming Technology, Universitaet Stuttgart, Stuttgart (Germany); Sindel, Manfred [AUDI AG, Neckarsulm (Germany)

2010-06-15T23:59:59.000Z

435

Integrated modeling of CO2 storage and leakage scenarios including transitions between super- and sub-critical conditions, and phase change between liquid and gaseous CO2  

SciTech Connect

Storage of CO{sub 2} in saline aquifers is intended to be at supercritical pressure and temperature conditions, but CO{sub 2} leaking from a geologic storage reservoir and migrating toward the land surface (through faults, fractures, or improperly abandoned wells) would reach subcritical conditions at depths shallower than 500-750 m. At these and shallower depths, subcritical CO{sub 2} can form two-phase mixtures of liquid and gaseous CO{sub 2}, with significant latent heat effects during boiling and condensation. Additional strongly non-isothermal effects can arise from decompression of gas-like subcritical CO{sub 2}, the so-called Joule-Thomson effect. Integrated modeling of CO{sub 2} storage and leakage requires the ability to model non-isothermal flows of brine and CO{sub 2} at conditions that range from supercritical to subcritical, including three-phase flow of aqueous phase, and both liquid and gaseous CO{sub 2}. In this paper, we describe and demonstrate comprehensive simulation capabilities that can cope with all possible phase conditions in brine-CO{sub 2} systems. Our model formulation includes: (1) an accurate description of thermophysical properties of aqueous and CO{sub 2}-rich phases as functions of temperature, pressure, salinity and CO{sub 2} content, including the mutual dissolution of CO{sub 2} and H{sub 2}O; (2) transitions between super- and subcritical conditions, including phase change between liquid and gaseous CO{sub 2}; (3) one-, two-, and three-phase flow of brine-CO{sub 2} mixtures, including heat flow; (4) non-isothermal effects associated with phase change, mutual dissolution of CO{sub 2} and water, and (de-) compression effects; and (5) the effects of dissolved NaCl, and the possibility of precipitating solid halite, with associated porosity and permeability change. Applications to specific leakage scenarios demonstrate that the peculiar thermophysical properties of CO{sub 2} provide a potential for positive as well as negative feedbacks on leakage rates, with a combination of self-enhancing and self-limiting effects. Lower viscosity and density of CO{sub 2} as compared to aqueous fluids provides a potential for self-enhancing effects during leakage, while strong cooling effects from liquid CO{sub 2} boiling into gas, and from expansion of gas rising towards the land surface, act to self-limit discharges. Strong interference between fluid phases under three-phase conditions (aqueous - liquid CO{sub 2} - gaseous CO{sub 2}) also tends to reduce CO{sub 2} fluxes. Feedback on different space and time scales can induce non-monotonic behavior of CO{sub 2} flow rates.

Pruess, K.

2011-05-15T23:59:59.000Z

436

This Policy Brief is an excerpt from the report: "Delivering Energy Efficiency to Middle Income Single Family Households." For the full report and other resources visit: http://middleincome.lbl.gov  

E-Print Network (OSTI)

This Policy Brief is an excerpt from the report: "Delivering Energy Efficiency to Middle Income Purcell, Deputy Director at Home This paper is part of the LBNL Clean Energy Financing Policy Brief series://eetd.lbl.gov/EAP/EMP/. The work described in this Policy Brief was funded by the Department of Energy Office of Energy Efficiency

437

This Policy Brief is an excerpt from the report: "Delivering Energy Efficiency to Middle Income Single Family Households." For the full report and other resources visit: http://middleincome.lbl.gov  

E-Print Network (OSTI)

This Policy Brief is an excerpt from the report: "Delivering Energy Efficiency to Middle Income://middleincome.lbl.gov March 6, 2012 Scaling Energy Efficiency in the Heart of the Residential Market: Increasing Middle America's Access to Capital for Energy Improvements Middle income American households ­ broadly defined

438

This Policy Brief is an excerpt from the report: "Delivering Energy Efficiency to Middle Income Single Family Households." For the full report and other resources visit: http://middleincome.lbl.gov  

E-Print Network (OSTI)

This Policy Brief is an excerpt from the report: "Delivering Energy Efficiency to Middle Income households. This paper is part of the LBNL Clean Energy Financing Policy Brief series. To join the email list in this Policy Brief was funded by the Department of Energy Office of Energy Efficiency and Renewable Energy

439

This Policy Brief is an excerpt from the report: "Delivering Energy Efficiency to Middle Income Single Family Households." For the full report and other resources visit: http://middleincome.lbl.gov  

E-Print Network (OSTI)

This Policy Brief is an excerpt from the report: "Delivering Energy Efficiency to Middle Income of the LBNL Clean Energy Program Policy Brief series. These working papers highlight emerging program models and industry). Energy conservation in new and existing buildings plays a key role in the plan's ambitious goals

440

This Policy Brief is an excerpt from the report: "Delivering Energy Efficiency to Middle Income Single Family Households." For the full report and other resources visit: http://middleincome.lbl.gov  

E-Print Network (OSTI)

This Policy Brief is an excerpt from the report: "Delivering Energy Efficiency to Middle Income Clean Energy Financing Policy Brief series. To join the email list to receive these policy briefs for Credit: Case Study on Clean Energy Works Oregon Launched as a Portland-based pilot in April 2010, Clean

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

LIST OF 361 ACORN COUNCIL AFFLILIATES, SUBSIDIARIES AN ALLIED ORGANIZATION (Note: The word ACORN is not always included in the associated entity name)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

361 ACORN COUNCIL AFFLILIATES, SUBSIDIARIES, AND ALLIED 361 ACORN COUNCIL AFFLILIATES, SUBSIDIARIES, AND ALLIED ORGANIZATIONS (Note: The word "ACORN" is not always included in the associated entity name) 1. Association of Community Organizations for Reform Now (ACORN) 2. ACORN National Office: Brooklyn, NY 3. ACORN Bronx, NY 4. ACORN Brooklyn, NY 5. ACORN Buffalo, NY 6. ACORN Hempstead, NY 7. ACORN HOUSING CORPORATION Brooklyn, NY 8. PROJECT VOTE Brooklyn, NY 9. MHANY Brooklyn, NY 10. ACORN National Office: Washington, D.C. 11. ACORN Washington, DC 12. ACORN HOUSING CORPORATION Washington, DC 13. ACORN Political 1334 G St, NW Suite B Washington, DC 20005 14. AISJ Washington, DC 15. ACORN National Office: Little Rock, AR 16. ACORN Pine Bluff, AR 17. ACORN Housing Corporation Little Rock, AR

442

Investigation of materials performances in high moisture environments including corrosive contaminants typical of those arising by using alternative fuels in gas turbines  

NLE Websites -- All DOE Office Websites (Extended Search)

materials performances in high moisture materials performances in high moisture environments including corrosive contaminants typical of those arising by using alternative fuels in gas turbines Gerald Meier, Frederick Pettit and Keeyoung Department of Materials Science and Engineering, Jung University of Pittsburgh Pittsburgh, PA 15260 Peer review Workshop III UTSR Project 04 01 SR116 October 18-20, 2005 Project Approach Task I Selection and Preparation of Specimens Task II Selection of Test Conditions Specimens : GTD111+CoNiCrAlY and Pt Aluminides, N5+Pt Aluminides Deposit : No Deposit, CaO, CaSO 4 , Na 2 SO 4 1150℃ Dry 1150℃ Wet 950℃ Wet 750℃ SO 3 950℃ Dry Selection of Test Temperature, T 1 , Gas Environment and Deposit Composition, D

443

Low-rank coal research. Final technical report, April 1, 1988--June 30, 1989, including quarterly report, April--June 1989  

DOE Green Energy (OSTI)

This work is a compilation of reports on ongoing research at the University of North Dakota. Topics include: Control Technology and Coal Preparation Research (SO{sub x}/NO{sub x} control, waste management), Advanced Research and Technology Development (turbine combustion phenomena, combustion inorganic transformation, coal/char reactivity, liquefaction reactivity of low-rank coals, gasification ash and slag characterization, fine particulate emissions), Combustion Research (fluidized bed combustion, beneficiation of low-rank coals, combustion characterization of low-rank coal fuels, diesel utilization of low-rank coals), Liquefaction Research (low-rank coal direct liquefaction), and Gasification Research (hydrogen production from low-rank coals, advanced wastewater treatment, mild gasification, color and residual COD removal from Synfuel wastewaters, Great Plains Gasification Plant, gasifier optimization).

Not Available

1989-12-31T23:59:59.000Z

444

Tone signal generator for producing multioperator tone signals using an operator circuit including a waveform generator, a selector and an enveloper  

DOE Patents (OSTI)

A frequency modulation (FM) tone signal generator for generating a FM tone signal is disclosed. The tone signal generator includes a waveform generator having a plurality of wave tables, a selector and an enveloper. The waveform generator furnishes a waveform signal in response to a phase angle address signal. Each wave table stores a different waveform. The selector selects one of the wave tables in response to a plurality of selection signals such that the selected wave table largely provides the waveform signal upon being addressed largely by the phase angle address signal. Selection of the selected wave table varies with each selection signal. The enveloper impresses an envelope signal on the waveform signal. The envelope signal is used as a carrier or modulator for generating the FM tone signal. 17 figs.

Dong, Q.; Jenkins, M.V.; Bernadas, S.R.

1997-09-09T23:59:59.000Z

445

Technical support document: Energy conservation standards for consumer products: Dishwashers, clothes washers, and clothes dryers including: Environmental impacts; regulatory impact analysis  

SciTech Connect

The Energy Policy and Conservation Act as amended (P.L. 94-163), establishes energy conservation standards for 12 of the 13 types of consumer products specifically covered by the Act. The legislation requires the Department of Energy (DOE) to consider new or amended standards for these and other types of products at specified times. This Technical Support Document presents the methodology, data and results from the analysis of the energy and economic impacts of standards on dishwashers, clothes washers, and clothes dryers. The economic impact analysis is performed in five major areas: An Engineering Analysis, which establishes technical feasibility and product attributes including costs of design options to improve appliance efficiency. A Consumer Analysis at two levels: national aggregate impacts, and impacts on individuals. The national aggregate impacts include forecasts of appliance sales, efficiencies, energy use, and consumer expenditures. The individual impacts are analyzed by Life-Cycle Cost (LCC), Payback Periods, and Cost of Conserved Energy (CCE), which evaluate the savings in operating expenses relative to increases in purchase price; A Manufacturer Analysis, which provides an estimate of manufacturers' response to the proposed standards. Their response is quantified by changes in several measures of financial performance for a firm. An Industry Impact Analysis shows financial and competitive impacts on the appliance industry. A Utility Analysis that measures the impacts of the altered energy-consumption patterns on electric utilities. A Environmental Effects analysis, which estimates changes in emissions of carbon dioxide, sulfur oxides, and nitrogen oxides, due to reduced energy consumption in the home and at the power plant. A Regulatory Impact Analysis collects the results of all the analyses into the net benefits and costs from a national perspective. 47 figs., 171 tabs. (JF)

1990-12-01T23:59:59.000Z

446

Technical support document: Energy conservation standards for consumer products: Dishwashers, clothes washers, and clothes dryers including: Environmental impacts; regulatory impact analysis  

SciTech Connect

The Energy Policy and Conservation Act as amended (P.L. 94-163), establishes energy conservation standards for 12 of the 13 types of consumer products specifically covered by the Act. The legislation requires the Department of Energy (DOE) to consider new or amended standards for these and other types of products at specified times. This Technical Support Document presents the methodology, data and results from the analysis of the energy and economic impacts of standards on dishwashers, clothes washers, and clothes dryers. The economic impact analysis is performed in five major areas: An Engineering Analysis, which establishes technical feasibility and product attributes including costs of design options to improve appliance efficiency. A Consumer Analysis at two levels: national aggregate impacts, and impacts on individuals. The national aggregate impacts include forecasts of appliance sales, efficiencies, energy use, and consumer expenditures. The individual impacts are analyzed by Life-Cycle Cost (LCC), Payback Periods, and Cost of Conserved Energy (CCE), which evaluate the savings in operating expenses relative to increases in purchase price; A Manufacturer Analysis, which provides an estimate of manufacturers' response to the proposed standards. Their response is quantified by changes in several measures of financial performance for a firm. An Industry Impact Analysis shows financial and competitive impacts on the appliance industry. A Utility Analysis that measures the impacts of the altered energy-consumption patterns on electric utilities. A Environmental Effects analysis, which estimates changes in emissions of carbon dioxide, sulfur oxides, and nitrogen oxides, due to reduced energy consumption in the home and at the power plant. A Regulatory Impact Analysis collects the results of all the analyses into the net benefits and costs from a national perspective. 47 figs., 171 tabs. (JF)

Not Available

1990-12-01T23:59:59.000Z

447

High Temperature Superconductors: From Delivery to Applications (Presentation from 2011 Ernest Orlando Lawrence Award-winner, Dr. Amit Goyal, and including introduction by Energy Secretary, Dr. Steven Chu)  

Science Conference Proceedings (OSTI)

Dr. Amit Goyal, a high temperature superconductivity (HTS) researcher at Oak Ridge National Laboratory, was named a 2011 winner of the Department of Energy's Ernest Orlando Lawrence Award honoring U.S. scientists and engineers for exceptional contributions in research and development supporting DOE and its mission. Winner of the award in the inaugural category of Energy Science and Innovation, Dr. Goyal was cited for his work in 'pioneering research and transformative contributions to the field of applied high temperature superconductivity, including fundamental materials science advances and technical innovations enabling large-scale applications of these novel materials.' Following his basic research in grain-to-grain supercurrent transport, Dr. Goyal focused his energy in transitioning this fundamental understanding into cutting-edge technologies. Under OE sponsorship, Dr. Goyal co-invented the Rolling Assisted Bi-Axially Textured Substrate technology (RABiTS) that is used as a substrate for second generation HTS wires. OE support also led to the invention of Structural Single Crystal Faceted Fiber Substrate (SSIFFS) and the 3-D Self Assembly of Nanodot Columns. These inventions and associated R&D resulted in 7 R&D 100 Awards including the 2010 R&D Magazine's Innovator of the Year Award, 3 Federal Laboratory Consortium Excellence in Technology Transfer National Awards, a DOE Energy100 Award and many others. As a world authority on HTS materials, Dr. Goyal has presented OE-sponsored results in more than 150 invited talks, co-authored more than 350 papers and is a fellow of 7 professional societies.

Goyal, Amit (Oak Ridge National Laboratory)

2012-05-22T23:59:59.000Z

448

EXPLORING HALO SUBSTRUCTURE WITH GIANT STARS: SUBSTRUCTURE IN THE LOCAL HALO AS SEEN IN THE GRID GIANT STAR SURVEY INCLUDING EXTENDED TIDAL DEBRIS FROM {omega}CENTAURI  

Science Conference Proceedings (OSTI)

We present the latitude-normalized radial velocity (v{sub b} ) distribution of 3318 subsolar metallicity, V {approx}< 13.5 stars from the Grid Giant Star Survey (GGSS) in southern hemisphere fields. The sample includes giants mostly within {approx}5 kpc from the Galactic disks and halo. The nearby halo is found to (1) exhibit significant kinematical substructure, and (2) be prominently represented by several velocity coherent structures, including a very retrograde 'cloud' of stars at l {approx} 285 Degree-Sign and extended, retrograde 'streams' visible as relatively tight l-v{sub b} sequences. One sequence in the fourth Galactic quadrant lies within the l-v{sub b} space expected to contain tidal debris from the 'star cluster' {omega}Centauri. Not only does {omega}Cen lie precisely in this l-v{sub b} sequence, but the positions and v{sub b} of member stars match those of N-body simulations of tidally disrupting dwarf galaxies on orbits ending with {omega}Cen's current position and space motion. But the ultimate proof that we have very likely found extended parts of the {omega}Cen tidal stream comes from echelle spectroscopy of a subsample of the stars that reveals a very particular chemical abundance signature known to occur only in {omega}Cen. The newly discovered {omega}Cen debris accounts for almost all fourth Galactic quadrant retrograde stars in the southern GGSS, which suggests {omega}Cen is a dominant contributor of retrograde giant stars in the inner Galaxy.

Majewski, Steven R.; Nidever, David L.; Damke, Guillermo J.; Patterson, Richard J.; Garcia Perez, Ana E. [Department of Astronomy, University of Virginia, Charlottesville, VA 22904-4325 (United States); Smith, Verne V. [National Optical Astronomy Observatories, P.O. Box 26732, Tucson, AZ 85726 (United States); Kunkel, William E. [Las Campanas Observatory, Casilla 601, La Serena (Chile); Bizyaev, Dmitry, E-mail: srm4n@virginia.edu, E-mail: dln5q@virginia.edu, E-mail: gjd3r@virginia.edu, E-mail: ricky@virginia.edu, E-mail: aeg4x@virginia.edu, E-mail: vsmith@noao.edu, E-mail: kunkel@jeito.lco.cl, E-mail: dmbiz@apo.nmsu.edu [Department of Astronomy, New Mexico State University/Apache Point Observatory, Sunspot NM 88349 (United States)

2012-03-10T23:59:59.000Z

449

Uranium potential of southwestern New Mexico (southern Hidalgo County), including observations on crystallization history of lavas and ash tuffs and the release of uranium from them. Final report  

SciTech Connect

Geological environments present in southwestern New Mexico include thick sequences of sedimentary rock including limestone, conglomerates, sandstone, and shale: igneous intrusions with associated metal deposits; caldera centers, margins, and outflow facies; and basins with marginal faults and thick late Cenozoic sedimentary fillings. Predominant rock types are Paleozoic carbonates, Mesozoic terrigeneous rocks and carbonates, and Cenozoic volcanic rocks and basin-filling terrigeneous rocks. Consideration of information available in Preliminary Reconnaissance Reports and in Hydrogeochemical and Stream Reconnaissance Reports together with 347 new whole rock chemical analyses points to three areas of anomalous uranium abundance in Hidalgo County, New Mexico. The area has experienced three major periods of igneous activity in Phanerozoic time: one associated with the Laramide cycle of the Late Cretaceous and early Tertiary, mid-Tertiary cycle of silicic volcanism with abundant calderas, and a late Tertiary cycle of mafic volcanism. Silicic volcanic rocks are the most common exposed rock type in the area, and the most enriched in uranium (range, 0.4 to 19 ppM). The most likely source for any uranium ore-forming solutions lies with this cycle of volcanism. Solutions might have been introduced during volcanism or formed later by groundwater leaching of cooled volcanic rocks. Results indicate that groundwater leaching of cooled volcanic rocks was not an effective means of mobilizing uranium in the area. Study of several rhyolite lava flows indicates that they were emplaced in supercooled condition and may have crystallized completely at temperatures well below their liquids, or they may have warmed as crystallization released latent heat. Statistical comparison of the uranium concentration revealed no differences between vitrophyres and associated felsites.

Walton, A.W.; Salter, T.L.; Zetterlund, D.

1980-08-01T23:59:59.000Z

450

A Kinetic Modeling study on the Oxidation of Primary Reference Fuel?Toluene Mixtures Including Cross Reactions between Aromatics and Aliphatics  

DOE Green Energy (OSTI)

A detailed chemical kinetic model for the mixtures of Primary Reference Fuel (PRF: n-heptane and iso-octane) and toluene has been proposed. This model is divided into three parts; a PRF mechanism [T. Ogura et al., Energy & Fuels 21 (2007) 3233-3239], toluene sub-mechanism and cross reactions between PRF and toluene. Toluene sub-mechanism includes the low temperature kinetics relevant to engine conditions. A chemical kinetic mechanism proposed by Pitz et al. [Proc. the 2nd Joint Meeting of the U.S. Combust. Institute (2001)] was used as a starting model and modified by updating rate coefficients. Theoretical estimations of rate coefficients were performed for toluene and benzyl radical reactions important at low temperatures. Cross-reactions between alkane, alkene, and aromatics were also included in order to account for the acceleration by the addition of toluene into iso-octane recently found in the shock tube study of the ignition delay [Y. Sakai et al, SAE 2007-01-4014 (2007)]. Validations of the model were performed with existing shock tube and flow tube data. The model well predicts the ignition characteristics of toluene and PRF/Toluene mixtures under the wide range of temperatures (500-1700 K) and pressures (2-50 atm). It is found that reactions of benzyl radical with oxygen molecule determine the reactivity of toluene at low temperature. Although the effect of toluene addition to iso-octane is not fully resolved, the reactions of alkene with benzyl radical have the possibility to account for the kinetic interactions between PRF and toluene.

Sakai, Y; Miyoshi, A; Koshi, M; Pitz, W J

2008-01-09T23:59:59.000Z

451

Corrective Action Investigation Plan for Corrective Action Unit 410: Waste Disposal Trenches, Tonopah Test Range, Nevada, Revision 0 (includes ROTCs 1, 2, and 3)  

SciTech Connect

This Corrective Action Investigation Plan contains the U.S. Department of Energy, National Nuclear Security Administration Nevada Operations Office's approach to collect the data necessary to evaluate corrective action alternatives appropriate for the closure of Corrective Action Unit (CAU) 410 under the Federal Facility Agreement and Consent Order. Corrective Action Unit 410 is located on the Tonopah Test Range (TTR), which is included in the Nevada Test and Training Range (formerly the Nellis Air Force Range) approximately 140 miles northwest of Las Vegas, Nevada. This CAU is comprised of five Corrective Action Sites (CASs): TA-19-002-TAB2, Debris Mound; TA-21-003-TANL, Disposal Trench; TA-21-002-TAAL, Disposal Trench; 09-21-001-TA09, Disposal Trenches; 03-19-001, Waste Disposal Site. This CAU is being investigated because contaminants may be present in concentrations that could potentially pose a threat to human health and/or the environment, and waste may have been disposed of with out appropriate controls. Four out of five of these CASs are the result of weapons testing and disposal activities at the TTR, and they are grouped together for site closure based on the similarity of the sites (waste disposal sites and trenches). The fifth CAS, CAS 03-19-001, is a hydrocarbon spill related to activities in the area. This site is grouped with this CAU because of the location (TTR). Based on historical documentation and process know-ledge, vertical and lateral migration routes are possible for all CASs. Migration of contaminants may have occurred through transport by infiltration of precipitation through surface soil which serves as a driving force for downward migration of contaminants. Land-use scenarios limit future use of these CASs to industrial activities. The suspected contaminants of potential concern which have been identified are volatile organic compounds; semivolatile organic compounds; high explosives; radiological constituents including depleted uranium, beryllium, total petroleum hydrocarbons; and total Resource Conservation and Recovery Act metals. Field activities will consist of geophysical and radiological surveys, and collecting soil samples at biased locations by appropriate methods. A two-step data quality objective strategy will be followed: (1) define the nature of contamination at each CAS location by identifying any contamination above preliminary action levels (PALs); and, (2) determine the extent of contamination identified above PALs. The results of this field investigation will support a defensible evaluation of corrective action alternatives in the corrective action decision document.

NNSA /NV

2002-07-16T23:59:59.000Z

452

Uranium hydrogeochemical and stream sediment reconnaissance data release for the Elk City NTMS Quadrangle, Idaho/Montana, including concentrations of forty-five additional elements  

Science Conference Proceedings (OSTI)

Totals of 1580 water and 1720 sediment samples were collected from 1754 locations in the quadrangle. Elemental concentration, field measurement, weather, geologic, and geographic data for each sample location are listed for waters in Appendix I-A and for sediments in Appendix I-B. Uranium/thorium ratios for sediment samples are also included in Appendix I-B. All elemental analyses were performed at the LASL. Water samples were initially analyzed for uranium by fluorometry. All water samples containing more than 40 parts per billion (ppB) uranium were reanalyzed by delayed-neutron counting (DNC). A supplemental report containing the multielement analyses of water samples will be open filed in the near future. Sediments were analyzed for uranium and thorium as well as aluminum, antimony, arsenic, barium, beryllium, bismuth, cadmium, calcium, cerium, cesium, chlorine, chromium, cobalt, copper, dysprosium, europium, gold, hafnium, iron, lanthanum, lead, lithium, lutetium, magnesium, manganese, nickel, niobium, potassium, rubidium, samarium, selenium, scandium, silver, sodium, strontium, tantalum, terbium, tin, titanium, tungsten, vanadium, ytterbium, zinc, and zirconium. Basic statistics for 40 of these elements are presented. All sediments were analyzed for uranium by delayed-neutron counting. Other elemental concentrations in sediments were determined by neutron-activation analysis for 30 elements, by x-ray fluorescence for 12 elements, and by arc-source emission spectrography for 2 elements. Analytical results for sediments are reported as parts per million.

Broxton, D.E.; Beyth, M.

1980-07-01T23:59:59.000Z

453

ADVANCED POWER SYSTEMS - ASH BEHAVIOR IN POWER SYSTEMS. INCLUDES THE SEMIANNUAL REPORT FOR THE PERIOD JANUARY 01, 1998 - JUNE 30, 1998.  

SciTech Connect

The overall goal of this initiative is to develop fundamental knowledge of ash behavior in power systems for the purpose of increasing power production efficiency, reducing operation and maintenance costs, and reducing greenhouse gas emissions into the atmosphere. The specific objectives of this initiative focus primarily on ash behavior related to advanced power systems and include the following: Determine the current status of the fundamental ash interactions and deposition formation mechanisms as already reported through previous or ongoing projects at the EERC or in the literature; Determine sintering mechanisms for temperatures and particle compositions that are less well known and remain for the most part undetermined; Identify the relationship between the temperature of critical viscosity (T{sub cv}) as measured in a viscometer and the crystallization occurring in the melt; Perform a literature search on the use of heated-stage microscopy (HSM) for examining in situ ash-sintering phenomena and then validate the use of HSM in the determination of viscosity in spherical ash particles; Ascertain the formation and stability of specific mineral or amorphous phases in deposits typical of advanced power systems; and Evaluate corrosion for alloys being used in supercritical combustion systems.

1998-09-01T23:59:59.000Z

454

High resolution telescope including an array of elemental telescopes aligned along a common axis and supported on a space frame with a pivot at its geometric center  

DOE Patents (OSTI)

A large effective-aperture, low-cost optical telescope with diffraction-limited resolution enables ground-based observation of near-earth space objects. The telescope has a non-redundant, thinned-aperture array in a center-mount, single-structure space frame. It employes speckle interferometric imaging to achieve diffraction-limited resolution. The signal-to-noise ratio problem is mitigated by moving the wavelength of operation to the near-IR, and the image is sensed by a Silicon CCD. The steerable, single-structure array presents a constant pupil. The center-mount, radar-like mount enables low-earth orbit space objects to be tracked as well as increases stiffness of the space frame. In the preferred embodiment, the array has elemental telescopes with subaperture of 2.1 m in a circle-of-nine configuration. The telescope array has an effective aperture of 12 m which provides a diffraction-limited resolution of 0.02 arc seconds. Pathlength matching of the telescope array is maintained by a electro-optical system employing laser metrology. Speckle imaging relaxes pathlength matching tolerance by one order of magnitude as compared to phased arrays. Many features of the telescope contribute to substantial reduction in costs. These include eliminating the conventional protective dome and reducing on-site construction activities. The cost of the telescope scales with the first power of the aperture rather than its third power as in conventional telescopes.

Norbert, Massie A. (San Ramon, CA); Yale, Oster (Danville, CA)

1992-01-01T23:59:59.000Z

455

High resolution telescope including an array of elemental telescopes aligned along a common axis and supported on a space frame with a pivot at its geometric center  

DOE Patents (OSTI)

A large effective-aperture, low-cost optical telescope with diffraction-limited resolution enables ground-based observation of near-earth space objects. The telescope has a non-redundant, thinned-aperture array in a center-mount, single-structure space frame. It employes speckle interferometric imaging to achieve diffraction-limited resolution. The signal-to-noise ratio problem is mitigated by moving the wavelength of operation to the near-IR, and the image is sensed by a Silicon CCD. The steerable, single-structure array presents a constant pupil. The center-mount, radar-like mount enables low-earth orbit space objects to be tracked as well as increases stiffness of the space frame. In the preferred embodiment, the array has elemental telescopes with subaperture of 2.1 m in a circle-of-nine configuration. The telescope array has an effective aperture of 12 m which provides a diffraction-limited resolution of 0.02 arc seconds. Pathlength matching of the telescope array is maintained by a electro-optical system employing laser metrology. Speckle imaging relaxes pathlength matching tolerance by one order of magnitude as compared to phased arrays. Many features of the telescope contribute to substantial reduction in costs. These include eliminating the conventional protective dome and reducing on-site construction activities. The cost of the telescope scales with the first power of the aperture rather than its third power as in conventional telescopes. 15 figs.

Norbert, M.A.; Yale, O.

1992-04-28T23:59:59.000Z

456

The geologic basis for appraising undiscovered hydrocarbon resources in the National Petroleum Reserve of Alaska by the play-appraisal method. [Glossary included  

SciTech Connect

The Naval Petroleum Reserves Production Act of 1976 provided for a Government study to determine the best general procedure for the development, production, transportation, and distribution of the hydrocarbon resources in the National Petroleum Reserve in Alaska (NPRA). An essential and distinguishing feature of this study was the development of a resource-appraisal method that would furnish the estimates of undiscovered oil and gas resources in a form compatible with the sophisticated computer model demanded by the economic and policy-analysis portion of the study. This appraisal represents the first use of the newly developed play method and is the latest in a series of hydrocarbon-resource appraisals of the NPRA. As the most recent of the series, it is based on a larger number of data. In the NPRA, the play method was first used by the USGS in November 1979. At intervals averaging 6 months, as new information was gained from the ongoing drilling program, the original assessment was reviewed and updated. The chapter was prepared to document the petroleum geology for each assessed play and thus serve as a basis for further assessments. In addition, it provides information about the assessment personnel, the data base, and analogous formations; for each play, it includes a petroleum geology summary, an outline map, a completed assessment form, and resource estimates. A glossary of terms used in the assessment may be found at the end of this chapter.

Bird, K.J.

1989-01-01T23:59:59.000Z

457

Orientational relaxation in a dispersive dynamic medium : Generalization of the Kubo-Ivanov-Anderson jump diffusion model to include fractional environmental dynamics  

E-Print Network (OSTI)

Ivanov-Anderson (IA) model (and an earlier treatment by Kubo) envisages a decay of the orientational correlation by random but large amplitude molecular jumps, as opposed to infinitesimal small jumps assumed in Brownian diffusion. Recent computer simulation studies on water and supercooled liquids have shown that large amplitude motions may indeed be more of a rule than exception. Existing theoretical studies on jump diffusion mostly assume an exponential (Poissonian) waiting time distribution for jumps, thereby again leading to an exponential decay. Here we extend the existing formalism of Ivanov and Anderson to include an algebraic waiting time distribution between two jumps. As a result, the first and second rank orientational time correlation functions show the same long time power law, but their short time decay behavior is quite different. The predicted Cole-Cole plot of dielectric relaxation reproduces various features of non-Debye behaviour observed experimentally. We also developed a theory where both unrestricted small jumps and large angular jumps coexist simultaneously. The small jumps are shown to have a large effect on the long time decay, particularly in mitigating the effects of algebraic waiting time distribution, and in giving rise to an exponential-like decay, with a time constant, surprisingly, less than the time constant that arises from small amplitude decay alone.

K. Seki; B. Bagchi; M. Tachiya

2007-10-17T23:59:59.000Z

458

Industrial Sites Work Plan for Leachfield Corrective Action Units: Nevada Test Site and Tonopah Test Range, Nevada (including Record of Technical Change Nos. 1, 2, 3, and 4)  

SciTech Connect

This Leachfield Corrective Action Units (CAUs) Work Plan has been developed in accordance with the Federal Facility Agreement and Consent Order (FFACO) that was agreed to by the U.S. Department of Energy, Nevada Operations Office (DOE/NV); the State of Nevada Division of Environmental Protection (NDEP); and the U.S. Department of Defense (FFACO, 1996). Under the FFACO, a work plan is an optional planning document that provides information for a CAU or group of CAUs where significant commonality exists. A work plan may be developed that can be referenced by leachfield Corrective Action Investigation Plans (CAIPs) to eliminate redundant CAU documentation. This Work Plan includes FFACO-required management, technical, quality assurance (QA), health and safety, public involvement, field sampling, and waste management documentation common to several CAUs with similar site histories and characteristics, namely the leachfield systems at the Nevada Test Site (NTS) and the Tonopah Test Range (TT R). For each CAU, a CAIP will be prepared to present detailed, site-specific information regarding contaminants of potential concern (COPCs), sampling locations, and investigation methods.

DOE /NV

1998-12-18T23:59:59.000Z

459

Technical support document: Energy efficiency standards for consumer products: Refrigerators, refrigerator-freezers, and freezers including draft environmental assessment, regulatory impact analysis  

Science Conference Proceedings (OSTI)

The Energy Policy and Conservation Act (P.L. 94-163), as amended by the National Appliance Energy Conservation Act of 1987 (P.L. 100-12) and by the National Appliance Energy Conservation Amendments of 1988 (P.L. 100-357), and by the Energy Policy Act of 1992 (P.L. 102-486), provides energy conservation standards for 12 of the 13 types of consumer products` covered by the Act, and authorizes the Secretary of Energy to prescribe amended or new energy standards for each type (or class) of covered product. The assessment of the proposed standards for refrigerators, refrigerator-freezers, and freezers presented in this document is designed to evaluate their economic impacts according to the criteria in the Act. It includes an engineering analysis of the cost and performance of design options to improve the efficiency of the products; forecasts of the number and average efficiency of products sold, the amount of energy the products will consume, and their prices and operating expenses; a determination of change in investment, revenues, and costs to manufacturers of the products; a calculation of the costs and benefits to consumers, electric utilities, and the nation as a whole; and an assessment of the environmental impacts of the proposed standards.

NONE

1995-07-01T23:59:59.000Z

460

An option for the coal industry in dealing with the carbon dioxide global greenhouse effect including estimates for reduced CO/sub 2/ emissions technologies  

SciTech Connect

A new technical option for the coal industry in dealing with the carbon dioxide greenhouse effect has been devised. The option concerns a ''hydrogen economy'' based on coal. We have developed a very efficient process called HYDROCARB, which effectively splits coal into carbon and hydrogen. This process produces a clean, pure carbon fuel from coal for application in both mobile and stationary heat engines. We are suggesting that coal refineries be built based on this technology. A co-product of the process is a hydrogen-rich gas. If one is concerned about the greenhouse effect, then either all or part of the carbon can be withheld and either mainly or only the hydrogen is used as fuel. If one desires to attain the ultimate, and eliminate all CO/sub 2/ emissions from coal, then all of the carbon can be stored and only the hydrogen used. The option is still open for utilizing the clean carbon, which would be placed in monitored retrievable storage, not unlike the strategic petroleum reserve (SPR). Should the greenhouse effect be found to be a myth in the future, the carbon would be taken out of storage and utilized as a clean fuel, the impurities having been previously removed. This concept can be valuable to the coal industry in response to the arguments of the anti-coal critics. Total capital cost estimates have been made to replace all conventional coal burning power plants in the US with technologies that eliminate emissions of CO/sub 2/. These include removal, recovery and disposal of CO/sub 2/, nuclear, solar, photovoltaics, biomass, and HYDROCARB. 12 refs., 1 fig. 4 tabs.

Steinberg, M.

1988-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "rented including single-family" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

OVERVIEW OF TUNA FISHERIES IN THE WESTERN AND CENTRAL PACIFIC OCEAN, INCLUDING ECONOMIC CONDITIONS – 2011 WCPFC-SC8-2012/GN WP-1  

E-Print Network (OSTI)

This paper provides a broad description of the major fisheries in the WCPFC Statistical Area (WCP-CA) highlighting activities during the most recent calendar year (2011) and covering the most recent version of catch estimates by gear and species. The provisional total WCP–CA tuna catch for 2011 was estimated at 2,244,776 mt, the lowest since 2005 and 300,000 mt lower than the record in 2009 (2,544,679 mt); this catch represented 79 % of the total Pacific Ocean catch of 2,833,020 mt, and 55 % of the global tuna catch (the provisional estimate for 2011 is 4,077,814 mt, which is the lowest for 10 years). The 2011 WCP–CA catch of skipjack (1,540,189 mt – 69 % of the total catch) was only the fifth highest recorded and around 215,000 mt less than the record catch of 2009 (1,756,628 mt). The WCP–CA yellowfin catch for 2011 (430,506 mt – 19%) was the lowest since 1996 and more than 170,000 mt lower than the record catch taken in 2005 (602,892 mt) due to poor catches in the purse seine fishery. The WCP–CA bigeye catch for 2011 (151,533 mt – 7%) was close to the average for the past decade. The 2011 WCP–CA albacore catch (122,548 mt- 5%) was relatively stable and close to the average for the past decade. The 2011 WCP–CA albacore catch includes catches of north

Republic Of Korea; Peter Williams; Peter Terawasi

2012-01-01T23:59:59.000Z

462

Excited states of the bacteriochlorophyll b dimer of rhodopseudomonas viridis. A QM/MM study of the photosynthetic reaction center that includes MM polarization  

Science Conference Proceedings (OSTI)

We present a hybrid quantum mechanical/molecular mechanical (QM/MM) model for microscopic solvation effects that includes polarizability in the MM region (QM/MMpol). QM/MMpol treatment of both ground and excited states is presented in the formalism. We present QM/MMpol analysis of the ground and electronic excited states of the bacteriochlorophyll b dimer (P) of the photosynthetic reaction center (RC) of Rhodopseudomonas viridis using the INDO/S method. The static-charge potential from the MM model of the RC alone causes Q{sub y1} to have significantly better agreement with the Stark effect results than isolated P. However, consideration of the protein polarization potential is further required to obtain more complete agreement with Stark effect experiments. Thus, we calculate a Q{sub y1} transition energy at 10826 cm{sup -1} with a ground to excited state change in dipole moment of 4.8 D; an absorption Stark effect angle of 43{degree}; a net shift of 0.15 electrons from the L subunit to the M subunit of P; and a linear dichroism angle (between the transition moment of Q{sub y1} and the pseudo-C{sub 2} axis of the RC) of 81{degree}. These results are in good agreement with experiment. Interestingly, we find that net CT increase is greater for Q{sub y1} than for the second excited state of P (Q{sub y2}), a result that we anticipated in an early model dimer study. 77 refs., 3 figs., 2 tabs.

Thompson, M.A.; Schenter, G.K. [Pacific Northwest Lab., Richland, WA (United States)

1995-04-27T23:59:59.000Z

463

SRS Public Involvement in Waste Management Has Resulted in Effective Decisions Supported by the Public Including Disposal Changes and Top-to-Bottom Review Initiative Consensus  

Science Conference Proceedings (OSTI)

In the Savannah River Site's (SRS') Solid Waste Management Program, a key to success is the Public Involvement Program. The Solid Waste Division at SRS manages the site's transuranic, low-level, mixed, and hazardous wastes. All decisions associated with management of this waste are of interest to the public and successful program implementation would be impossible without a vigorous public involvement program. The SRS Solid Waste Division (SWD) and its Department of Energy (DOE) customer developed, implemented, and maintain a comprehensive public participation and communications program. It is staffed by public participation and technical specialists to ensure information is presented in a manner that is technically accurate while being tailored for understanding by people without a technical background. The program provides the public with accurate, complete, timely information and early meaningful participation opportunities. It also fulfills the public participation activities required by laws, regulations, DOE Orders, and negotiated agreements. The primary goal of the SWD Public Participation Program is to fulfill the objectives of the SWD and SRS Strategic Plans to ''build trust and communicate openly, honestly, and responsibly with employees, customers, stakeholders, and regulators,'' and to ''work to extend the support of external stakeholders for the pursuit of SRS and DOE Complex business goals.'' This paper focuses on the public participation program goals, the implementation through formal plans and objectives, targeted waste management programs and specific audiences, and specific effects of the program on waste management activities. A discussion of the DOE and contractor teaming along with how plans are carried out is also included.

Goldston, W. T.; Villasor, H. P.

2003-02-27T23:59:59.000Z

464

A Self-Gravitational Upper Bound on Localized Energy, Including that of Virtual Particles and Quantum Fields, which Yields a Passable "Dark Energy" Density Estimate  

E-Print Network (OSTI)

The self-gravitational correction to a localized spherically symmetric static energy distribution is obtained from an upgraded Newtonian model which is energetically self-consistent, and is also obtained from the Birkhoff-theorem extension of the unique "Newtonian" form of the free-space Schwarzschild metric into the interior region of its self-gravitationally corrected source. The two approaches yield identical results, which include a strict prohibition on the gravitational redshift factor ever being other than finite, real and positive. Consequently, the self-gravitationally corrected energy within a sphere of radius r is bounded by r times the "Planck force", namely the fourth power of c divided by G. Even in the absence of spherical symmetry, the same bound, to within a factor of two, is shown to apply. That energy bound rules out any physical singularity at the Schwarzschild radius, and it also cuts off the mass deviation of any interacting quantum virtual particle at the Planck mass. Because quantum uncertainty makes the minimum energy of a quantum field infinite, such a field's self-gravitationally corrected energy essentially attains the Planck force times that field's boundary radius r. Roughly estimating r as c times the age of the universe yields a "dark energy" density of 1.7 joules per cubic kilometer. But if r is put to the Planck length appropriate to the birth of the universe, that energy density changes to the enormous Planck unit value, which could quite conceivably drive primordial "inflation". The density of "dark energy" decreases as the universe expands, but more slowly than the density of ordinary matter decreases. Its evolution suggests "dark energy" has inhomogeneities, which may be "dark matter".

Steven Kenneth Kauffmann

2012-11-18T23:59:59.000Z

465

Revisiting the Income Effect: Gasoline Prices and Grocery Purchases  

E-Print Network (OSTI)

or Rent Gasoline and Motor Oil Income after taxes Number ofor Rent Gasoline and Motor Oil Income after taxes Number of

Gicheva, Dora; Hastings, Justine; Villas-Boas, Sofia B

2008-01-01T23:59:59.000Z

466

Obama Administration's Budget Request for NIST Includes ...  

Science Conference Proceedings (OSTI)

... out in the President's Plan for Science ... precision timing, hydrogen energy sources, precision ... three appropriations outlined above, the Administration ...

2011-02-14T23:59:59.000Z

467

Including the Human Factor in Dependability Benchmarks  

E-Print Network (OSTI)

We describe the construction of a dependability benchmark that captures the impact of the human system operator on the tested system. Our benchmark follows the usual model of injecting faults and perturbations into the tested system; however, our perturbations are generated by the unscripted actions of actual human operators participating in the benchmark procedure in addition to more traditional fault injection. We introduce the issues that arise as we attempt to incorporate human behavior into a dependability benchmark and describe the possible solutions that we have arrived at through preliminary experimentation. Finally, we describe the implementation of our techniques in a dependability benchmark that we are currently developing

Aaron B. Brown; Leonard C. Chung; David A. Patterson

2002-01-01T23:59:59.000Z

468

Renewable electricity generation in California includes variable ...  

U.S. Energy Information Administration (EIA)

Power produced by geothermal, biomass, biogas, and small hydro generators can be easily dispatched, meaning it can be either increased, decreased, ...

469

Laser diode assembly including a cylindrical lens  

DOE Patents (OSTI)

The present invention provides a diffraction limited, high numerical aperture (fast) cylindrical microlens. The method for making the microlens is adaptable to produce a cylindrical lens that has almost any shape on its optical surfaces. The cylindrical lens may have a shape, such as elliptical or hyperbolic, designed to transform some particular given input light distribution into some desired output light distribution. In the method, the desired shape is first formed in a glass preform. Then, the preform is heated to the minimum drawing temperature and a fiber is drawn from it. The cross-sectional shape of the fiber bears a direct relation to the shape of the preform from which it was drawn. During the drawing process, the surfaces become optically smooth due to fire polishing. 11 figs.

Snyder, J.J.; Reichert, P.

1992-01-14T23:59:59.000Z

470

Energy-saving lighting systems. [Includes glossary  

SciTech Connect

Artificial lighting accounts for 20% of electrical energy, 7.6% of total energy, and 3.8% of total fuel in the US. Because conserving lighting energy can reduce operating costs as well as save energy, this book explores several practical ways to do that. The book first describes the complete range of light sources and their accessories, then goes on to cover photometric reports, techniques of lighting design, fluorescent luminaires, industrial lighting systems, manual and automatic lighting controls, the impact of air-conditioning on lighting systems, and exterior lighting. A glossary of lighting terminology, conversion tables, and recommended illumination levels appear in the appendix. The book is designed for students and practicity lighting engineers and designers. 56 references, 169 figures, 45 tables. (DCK)

Sorcar, P.C.

1982-01-01T23:59:59.000Z

471

Catalyst regeneration process including metal contaminants removal  

DOE Patents (OSTI)

Spent catalysts removed from a catalytic hydrogenation process for hydrocarbon feedstocks, and containing undesired metals contaminants deposits, are regenerated. Following solvent washing to remove process oils, the catalyst is treated either with chemicals which form sulfate or oxysulfate compounds with the metals contaminants, or with acids which remove the metal contaminants, such as 5-50 W % sulfuric acid in aqueous solution and 0-10 W % ammonium ion solutions to substantially remove the metals deposits. The acid treating occurs within the temperature range of 60.degree.-250.degree. F. for 5-120 minutes at substantially atmospheric pressure. Carbon deposits are removed from the treated catalyst by carbon burnoff at 800.degree.-900.degree. F. temperature, using 1-6 V % oxygen in an inert gas mixture, after which the regenerated catalyst can be effectively reused in the catalytic process.

Ganguli, Partha S. (Lawrenceville, NJ)

1984-01-01T23:59:59.000Z

472

Cryostat including heater to heat a target  

DOE Patents (OSTI)

A cryostat is provided which comprises a vacuum vessel; a target disposed within the vacuum vessel; a heat sink disposed within the vacuum vesssel for absorbing heat from the detector; a cooling mechanism for cooling the heat sink; a cryoabsorption mechanism for cryoabsorbing residual gas within the vacuum vessel; and a heater for maintaining the target above a temperature at which the residual gas is cryoabsorbed in the course of cryoabsorption of the residual gas by the cryoabsorption mechanism.

Pehl, Richard H. (Berkeley, CA); Madden, Norman W. (Livermore, CA); Malone, Donald F. (Oakland, CA)

1990-01-01T23:59:59.000Z

473

SWARTBERG INCLUDING GAMKASKLOOF near Prince Albert  

E-Print Network (OSTI)

-enthusiast, these mountains are your passport to rugged adventure, surrounded by the Klein Karoo splendour of the Klein Karoo Mountains) or do one of the many day hikes available.4x4 enthusiasts can follow the Zebra overnight shelter. ANySBERG near Laingsburg Isolation and rustic relaxation is key toAnysberg - a true Karoo

de Villiers, Marienne

474

This PDF file includes: Materials and Methods  

E-Print Network (OSTI)

Section 1: Sample prep and library construction The 4?adaptor library construction process is summarized in Fig. S1. This process incorporates several DNA engineering innovations to realize: i) high yield adaptor ligation and DNA circularization with minimal chimera formation, ii) directional adaptor insertion with minimal creation of structures containing undesired adaptor topologies, iii) iterative selection of constructs with desired adaptor topologies by PCR, iv) efficient formation of strand?specific ssDNA circles, and v) single tube solution? phase amplification of ssDNA circles to generate discrete (non?entangled) DNA nanoballs (DNBs) in high concentration. Whereas the process involves many independent enzymatic steps, it is largely recursive in nature and is amenable to automation for the processing of 96 sample batches.

Self-assembling Dna Nanoarrays; Radoje Drmanac; Andrew B. Sparks; Matthew J. Callow; Aaron L. Halpern; Norman L. Burns; Bahram G. Kermani; Paolo Carnevali; Igor Nazarenko; Geoffrey B. Nilsen; George Yeung; Fredrik Dahl; Andres Fern; Bryan Staker; Krishna P. Pant; Jonathan Baccash; Adam P. Borcherding; Anushka Brownley; Ryan Cedeno; Linsu Chen; Dan Chernikoff; Alex Cheung; Razvan Chirita; Benjamin Curson; Jessica C. Ebert; Coleen R. Hacker; Robert Hartlage; Brian Hauser; Steve Huang; Yuan Jiang; Vitali Karpinchyk; Mark Koenig; Calvin Kong; Tom L; Catherine Le; Jia Liu; Celeste E. Mcbride; Matt Morenzoni; Robert E. Morey; Karl Mutch; Helena Perazich; Kimberly Perry; Brock A. Peters; Joe Peterson; Charit L. Pethiyagoda; Kaliprasad Pothuraju; Claudia Richter; Abraham M. Rosenbaum; Shaunak Roy; Jay Shafto; Uladzislau Sharanhovich; Karen W. Shannon; Michel Sun; Joseph V. Thakuria; Anne Tran; Dylan Vu; Alexander Wait Zaranek Xiaodi Wu; William C. Banyai; Bruce Martin; Dennis G. Ballinger; George M. Church; Clifford A. Reid; Figs S To S; Tables S To S

2009-01-01T23:59:59.000Z

475

Writing Motor Specifications - How to Include Efficiency  

E-Print Network (OSTI)

The escalating cost of electric power coupled with the rapid depletion of our non-renewable resources makes consideration of motor efficiency good sense both from economic and conservation viewpoints. The efficiency of an electric motor can be assessed during bid evaluation by applying loss penalties: however, the actual value can be influenced at an earlier stage by a careful review of what goes into the motor specification.

Quartermaine, B. J.

1980-01-01T23:59:59.000Z

476

MAKING THE MOST OF This Presentation includes  

E-Print Network (OSTI)

://yuconnect.yorku.ca/ · Vanier Peer Advisors http://www.yorku.ca/vanier/academic_services/ homebase.html#Peeradvisors #12;Connect

477

Articles including thin film monolayers and multilayers  

DOE Patents (OSTI)

This invention pertains to thin film assemblies or devices useful as sensors, nonlinear optical materials, and trace material scavengers. It claims a base substrate having an oxide surface layer, and a multidentate ligand, capable of binding a metal ion, attached to the oxide surface layer of the base substrate. A metal species may be provided attached to the ligand, and a multifunctional organic ligand may be provided attached to the metal species. A second metal species may be provided attached to the multifunctional ligand.

Li, DeQuan; Swanson, B.I.

1992-12-31T23:59:59.000Z

478

Obama Administration's Budget Request Includes Vital ...  

Science Conference Proceedings (OSTI)

... teams as needed to exploit rapidly changing innovation trends. ... Advanced Solar Technologies - Third Generation Photovoltaics (+$5 million); ...

2010-10-05T23:59:59.000Z

479

Armor systems including coated core materials  

DOE Patents (OSTI)

An armor system and method involves providing a core material and a stream of atomized coating material that comprises a liquid fraction and a solid fraction. An initial layer is deposited on the core material by positioning the core material in the stream of atomized coating material wherein the solid fraction of the stream of atomized coating material is less than the liquid fraction of the stream of atomized coating material on a weight basis. An outer layer is then deposited on the initial layer by positioning the core material in the stream of atomized coating material wherein the solid fraction of the stream of atomized coating material is greater than the liquid fraction of the stream of atomized coating material on a weight basis.

Chu, Henry S. (Idaho Falls, ID); Lillo, Thomas M. (Idaho Falls, ID); McHugh, Kevin M. (Idaho Falls, ID)

2012-07-31T23:59:59.000Z

480

Armor systems including coated core materials  

SciTech Connect

An armor system and method involves providing a core material and a stream of atomized coating material that comprises a liquid fraction and a solid fraction. An initial layer is deposited on the core material by positioning the core material in the stream of atomized coating material wherein the solid fraction of the stream of atomized coating material is less than the liquid fraction of the stream of atomized coating material on a weight basis. An outer layer is then deposited on the initial layer by positioning the core material in the stream of atomized coating material wherein the solid fraction of the stream of atomized coating material is greater than the liquid fraction of the stream of atomized coating material on a weight basis.

2013-10-08T23:59:59.000Z