National Library of Energy BETA

Sample records for ren21 tags leds

  1. REN21 Renewables Interactive Map | Open Energy Information

    Open Energy Info (EERE)

    TOOL Name: REN21's Renewables Interactive Map AgencyCompany Organization: Renewable Energy Policy Network for the 21st Century (REN21) Sector: Energy Focus Area: Renewable...

  2. REN21 Renewables Interactive Map | Open Energy Information

    Open Energy Info (EERE)

    Interactive Map1 The REN21 Renewables Interactive Map provides information on renewable energy policies, expansion targets, current shares, installed capacity, current...

  3. Renewable Energy Policy Network for the 21st Century (REN21)...

    Open Energy Info (EERE)

    Network for the 21st Century (REN21) Jump to: navigation, search Logo: Renewable Energy Policy Network for the 21st Century (REN21) Name: Renewable Energy Policy Network for the...

  4. ICLEI and REN21 Local Renewables Web Portal | Open Energy Information

    Open Energy Info (EERE)

    International Council for Local Environmental Initiatives Partner: Renewable Energy Policy Network for the 21st Century (REN21) Sector: Energy, Climate Focus Area: People...

  5. LED

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Cost The high-brightness, rapidly pulsed, multicolor light-emitting diode (LED) driver delivers lighting performance that exceeds that of conventional (laserarc-light) sources ...

  6. Tag: technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tags

    technology<...

  7. LED Pulser

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Cost The high-brightness, rapidly pulsed, multicolor light-emitting diode (LED) driver delivers lighting performance that exceeds that of conventional (laserarc-light) sources ...

  8. LED Update

    SciTech Connect (OSTI)

    Johnson, Mark L.; Gordon, Kelly L.

    2006-09-01

    This article, which will appear in RESIDENTIAL LIGHTING MAGAZINE, interviews PNNL's Kelly Gordon and presents the interview in question and answer format. The topic is a light emitting diode (LED) lighting also known as solid state lighting. Solid state lighting will be a new category in an energy efficient lighting fixture design competition called Lighting for Tomorrow sponsored by the US Department of Energy Emerging Technologies Office, the American Institute for Lighting, and the Consortium for Energy Efficiency. LED technology has been around since the ’60s, but it has been used mostly for indicator lights on electronics equipment. The big breakthrough was the development in the 1990s of blue LEDs which can be combined with the red and green LEDs that already existed to make white light. LEDs produce 25 to 40 lumens of light per watt of energy used, almost as much as a CFL (50 lumens per watt) and much more efficient than incandescent sources, which are around 15 lumens per watt. They are much longer lived and practical in harsh environments unsuitable for incandescent lighting. They are ready for niche applications now, like under-counter lighting and may be practical for additional applications as technological challenges are worked out and the technology is advancing in leaps and bounds.

  9. LED lamp

    DOE Patents [OSTI]

    Galvez, Miguel; Grossman, Kenneth; Betts, David

    2013-11-12

    There is herein described a lamp for providing white light comprising a plurality of light sources positioned on a substrate. Each of said light sources comprises a blue light emitting diode (LED) and a dome that substantially covers said LED. A first portion of said blue light from said LEDs is transmitted through said domes and a second portion of said blue light is converted into a red light by a first phosphor contained in said domes. A cover is disposed over all of said light sources that transmits at least a portion of said red and blue light emitted by said light sources. The cover contains a second phosphor that emits a yellow light in response to said blue light. The red, blue and yellow light combining to form the white light and the white light having a color rendering index (CRI) of at least about 80.

  10. LED Color Characteristics

    SciTech Connect (OSTI)

    2012-01-01

    Color quality is an important consideration when evaluating LED-based products for general illumination. This fact sheet reviews the basics regarding light and color and summarizes the most important color issues related to white-light LED systems.

  11. LED Color Characteristics

    Broader source: Energy.gov (indexed) [DOE]

    LED Color Characteristics Color quality is an important consideration when evaluating lighting products. This fact sheet reviews the fundamentals regarding light and color, summarizing the most important color issues related to white-light LED systems, including color consistency, stability, tuning, and rendering, as well as chromaticity. LED Emission Attributes Individual LED dies, often referred to as chips, emit light in a narrow range of wavelengths, giving the appearance of a monochromatic

  12. Energy Efficiency of LEDs

    Broader source: Energy.gov [DOE]

    This fact sheet discusses the current state of the LED market and discusses package efficacy, luminaire efficacy, and application efficacy.

  13. Cree LED Lighting Solutions Formerly LED Lighting Fixtures LLF...

    Open Energy Info (EERE)

    LED Lighting Solutions Formerly LED Lighting Fixtures LLF Jump to: navigation, search Name: Cree LED Lighting Solutions (Formerly LED Lighting Fixtures (LLF)) Place: Morrisville,...

  14. LED MR16 Lamps

    SciTech Connect (OSTI)

    2012-07-01

    Solid-state lighting program technology fact sheet that describes the performance of LED MR16 lamps and discusses electronic compatibility concerns.

  15. Establishing LED Equivalency

    SciTech Connect (OSTI)

    2011-10-01

    Solid-state lighting program technology fact sheet that provides guidance for comparing products based on LED or other light source technologies.

  16. LED Color Stability

    SciTech Connect (OSTI)

    2014-03-01

    DOE Solid-State Lighting program technology fact sheet that addresses key questions about color stability and color shift in LED lighting applications.

  17. General Service LED Lamps

    SciTech Connect (OSTI)

    2012-04-01

    Solid-state lighting program technology fact sheet that compares general service incandescent lamps—i.e., light bulbs—to LED and CFL alternatives.

  18. LED Street Lighting

    Energy Savers [EERE]

    1, 2016 LED Street Lighting The American Medical Association's (AMA) recently adopted community guidance on street lighting adds another influential voice to issues that have been ...

  19. Recessed LED Downlights

    SciTech Connect (OSTI)

    2012-05-01

    Solid-state lighting program technology fact sheet that briefly discusses different LED product types and their performance relative to downlights utilizing traditional lamps.

  20. LED Color Characteristics

    Broader source: Energy.gov (indexed) [DOE]

    a combina- tion of colored LEDs typically red, green, and blue (RGB) are also available. ... triphosphor uorescent, utilize a combination of red-, blue-, and green-emitting phosphors. ...

  1. General Service LED Lamps

    Broader source: Energy.gov [DOE]

    A U.S. DOE SSL technology fact sheet that compares general service LED light bulbs with incandescent and CFL bulbs.

  2. high-power LEDs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Cost The high-brightness, rapidly pulsed, multicolor light-emitting diode (LED) driver delivers lighting performance that exceeds that of conventional (laserarc-light) sources ...

  3. LED Frequently Asked Questions

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Courtesy of Osram Opto Semiconductor. LED light sources used in a residential application. Terms SSL - solid-state lighting; umbrella term for semiconductors used to convert ...

  4. Bisfuel links - Photosynthesis tag

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Photosynthesis tag http://biofuels.asu.edu/biomimetic.shtml" target="_blank">Artificial Photosynthesis http://bioenergy.asu.edu/photosyn/photoweb/" target="_blank">Photosynthesis online http://bioenergy.asu.edu/photosyn/references.html" target="_blank">Photosynthesis Reference sources http://bioenergy.asu.edu/photosyn/education/learn.html" target="_blank">What is photosynthesis?

  5. Energy Efficiency of LEDs

    SciTech Connect (OSTI)

    2013-03-01

    Solid-state lighting program technology fact sheet on energy efficiency of LEDs, characterizing the current state of the market and discussing package efficacy, luminaire efficacy, and application efficacy.

  6. LED Directional Lamps

    SciTech Connect (OSTI)

    2012-11-01

    Solid-state lighting program technology fact sheet that provides an overview of the current performance of LED PAR-, BR-, R-, and AR-shaped lamps, which were all investigated by CALiPER in 2012.

  7. Optical Safety of LEDs

    SciTech Connect (OSTI)

    none,

    2013-06-01

    Solid-state lighting program technology fact sheet that clarifies the issue of LED lighting safety for the human eye and takes a look at current standards for photobiological safety.

  8. LED Frequently Asked Questions

    SciTech Connect (OSTI)

    2011-05-01

    Solid-state lighting program technology fact sheet that provides an overview of what retailers, energy efficiency advocates, and consumers need to know to make informed LED buying decisions.

  9. Prospects for LED lighting.

    SciTech Connect (OSTI)

    Tsao, Jeffrey Yeenien; Gee, James Martin; Simmons, Jerry Alvon

    2003-08-01

    Solid-state lighting using light-emitting diodes (LEDs) has the potential to reduce energy consumption for lighting by 50% while revolutionizing the way we illuminate our homes, work places, and public spaces. Nevertheless, substantial technical challenges remain in order for solid-state lighting to significantly displace the well-developed conventional lighting technologies. We review the potential of LED solid-state lighting to meet the long-term cost goals.

  10. Tagging explosives with sulfur hexafluoride

    DOE Patents [OSTI]

    Dietz, Russell N.; Cote, Edgar A.; Vogel, William; Dempsey, John C.

    1976-11-16

    Method and apparatus for tagging explosives with a source of SF.sub.6 permitting the detection of their presence utilizing sensitive sniffing apparatus.

  11. Buddy Tag CONOPS and Requirements.

    SciTech Connect (OSTI)

    Brotz, Jay Kristoffer; Deland, Sharon M.

    2015-12-01

    This document defines the concept of operations (CONOPS) and the requirements for the Buddy Tag, which is conceived and designed in collaboration between Sandia National Laboratories and Princeton University under the Department of State Key VerificationAssets Fund. The CONOPS describe how the tags are used to support verification of treaty limitations and is only defined to the extent necessary to support a tag design. The requirements define the necessary functions and desired non-functional features of the Buddy Tag at a high level

  12. LED MR16 Lamps

    Office of Energy Efficiency and Renewable Energy (EERE)

    The following CALiPER report provides detailed analysis of LED MR16 lamp performance, covering basic performance characteristics as well as subjective evaluation of beam, shadow, and color quality. Pending reports will offer analysis on performance attributes that are not captured by LM-79 testing. These reports are intended to educate the industry on market trends, potential issues, and important areas for improvement.

  13. Efficiency measurements using tagged neutrons (Conference) |...

    Office of Scientific and Technical Information (OSTI)

    Efficiency measurements using tagged neutrons Citation Details In-Document Search Title: Efficiency measurements using tagged neutrons Authors: Taddeucci, Terry N 1 + Show Author ...

  14. Efficiency measurements using tagged neutrons (Conference) |...

    Office of Scientific and Technical Information (OSTI)

    Efficiency measurements using tagged neutrons Citation Details In-Document Search Title: Efficiency measurements using tagged neutrons You are accessing a document from the ...

  15. LEDS | OpenEI Community

    Open Energy Info (EERE)

    LEDS Home Graham7781's picture Submitted by Graham7781(2017) Super contributor 16 November, 2012 - 11:23 LEDS the focus of Monday's 10 a.m. Town Hall Meeting LEDS Town Hall meeting...

  16. LED Basics | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SSL Basics » LED Basics LED Basics Unlike incandescent lamps, LEDs are not inherently white light sources. Instead, LEDs emit nearly monochromatic light, making them highly efficient for colored light applications such as traffic lights and exit signs. However, to be used as a general light source, white light is needed. White light can be achieved with LEDs in three ways: Phosphor conversion, in which a phosphor is used on or near the LED to convert the colored light to white light RGB

  17. Advanced Leds | Open Energy Information

    Open Energy Info (EERE)

    Place: Coventry, England, United Kingdom Zip: CV5 6SP Product: Advanced Leds develops LED technology for outdoor lighting, including street lighting applications. Coordinates:...

  18. LED Performance Under Tough Conditions

    Energy Savers [EERE]

    Three DOE Gateway applications show how LED luminaires respond to rigorous outdoor environments By JAmes BroDrick A lthough LED lighting has already made impressive inroads in ...

  19. LEd:JCD

    Office of Legacy Management (LM)

    LEd:JCD TO- 54 k-sour R3scsrck Fouadatlon 0f$..&+0is$tlstituta of TecGJlow Tecmolocy Csilter 10 Zest 35th Stmet ', c!xk3go lo, I3.Umie Atteqtion: MC. R. c. Barrall Gentlemen: Reference is wada to (a) your appUcetio0 of 3awe~ q,' 1959, rrqlacst~alirpn~tonori~200gsr;ls~hi~4~ched oranlm, (b) our a-q.4 of Z'ebmazy 6, lYS9, ke<wthg eddi- tiona1 'L+lmrQdiEp ia 'Support of your applJcatloD, (c) ycxu.r telqr3a of Eqtember 29, 1959, reque5tlng reneval of ~cense sm-49 -vc+biTt cksnga. Since'va kaem

  20. DOE Announces Webinars on Maintenance Practices for LED Streetlights, LED

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Color Stability, and More | Department of Energy Maintenance Practices for LED Streetlights, LED Color Stability, and More DOE Announces Webinars on Maintenance Practices for LED Streetlights, LED Color Stability, and More April 10, 2014 - 9:13am Addthis EERE offers webinars to the public on a range of subjects, from adopting the latest energy efficiency and renewable energy technologies to training for the clean energy workforce. Webinars are free; however, advanced registration is

  1. Simple Modular LED Cost Model

    Broader source: Energy.gov [DOE]

    The LED Cost Model, developed by the DOE Cost Modeling Working Group, provides a simplified method for analyzing the manufacturing costs of an LED package. The model focuses on the major cost...

  2. LED Performance Under Tough Conditions

    Broader source: Energy.gov [DOE]

    December 2015 LD+A magazine article entitled "LED Performance Under Tough Conditions" discussing three Dept of Energy GATEWAY applications that show how LED luminaires respond to rigorous outdoor environments.

  3. Employee-Led Safety Committees

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Employee-Led Safety Committees Presented to: 25 th National VPPPA Conference August 26, 2009 San Antonio, Texas Presented by: Jack Griffith HNF-421781 CHPRC0907-38 2 Employee-Led ...

  4. LED Lighting | Department of Energy

    Office of Environmental Management (EM)

    comparable or better light quality than other types of lighting. Check out the top 8 things you didn't know about LEDs to learn more. Energy Savings LED is a highly energy...

  5. SRNL Tagging and Tracking Video

    ScienceCinema (OSTI)

    None

    2016-06-15

    SRNL generates a next generation satellite base tracking system. The tagging and tracking system can work in remote wilderness areas, inside buildings, underground and other areas not well served by traditional GPS. It?s a perfect response to customer needs and market demand.

  6. LED Roundtable Reports | Department of Energy

    Energy Savers [EERE]

    LED Roundtable Reports LED Roundtable Reports PDF icon 2015 LED Core Technology Roundtable Report.pdf PDF icon 2015 LED Product Development and Manufacturing Roundtable Report.pdf...

  7. LED Green Power Inc | Open Energy Information

    Open Energy Info (EERE)

    LED Green Power Inc Jump to: navigation, search Name: LED Green Power Inc Place: Santa Cruz, California Zip: 95060 Product: LED fixture and cartridge manufacturer. References: LED...

  8. LED Roundtable Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LED Roundtable Reports LED Roundtable Reports PDF icon 2015 LED Core Technology Roundtable Report.pdf PDF icon 2015 LED Product Development and Manufacturing Roundtable Report.pdf ...

  9. Method for designing gas tag compositions

    DOE Patents [OSTI]

    Gross, K.C.

    1995-04-11

    For use in the manufacture of gas tags such as employed in a nuclear reactor gas tagging failure detection system, a method for designing gas tagging compositions utilizes an analytical approach wherein the final composition of a first canister of tag gas as measured by a mass spectrometer is designated as node No. 1. Lattice locations of tag nodes in multi-dimensional space are then used in calculating the compositions of a node No. 2 and each subsequent node so as to maximize the distance of each node from any combination of tag components which might be indistinguishable from another tag composition in a reactor fuel assembly. Alternatively, the measured compositions of tag gas numbers 1 and 2 may be used to fix the locations of nodes 1 and 2, with the locations of nodes 3-N then calculated for optimum tag gas composition. A single sphere defining the lattice locations of the tag nodes may be used to define approximately 20 tag nodes, while concentric spheres can extend the number of tag nodes to several hundred. 5 figures.

  10. Method for designing gas tag compositions

    DOE Patents [OSTI]

    Gross, Kenny C.

    1995-01-01

    For use in the manufacture of gas tags such as employed in a nuclear reactor gas tagging failure detection system, a method for designing gas tagging compositions utilizes an analytical approach wherein the final composition of a first canister of tag gas as measured by a mass spectrometer is designated as node #1. Lattice locations of tag nodes in multi-dimensional space are then used in calculating the compositions of a node #2 and each subsequent node so as to maximize the distance of each node from any combination of tag components which might be indistinguishable from another tag composition in a reactor fuel assembly. Alternatively, the measured compositions of tag gas numbers 1 and 2 may be used to fix the locations of nodes 1 and 2, with the locations of nodes 3-N then calculated for optimum tag gas composition. A single sphere defining the lattice locations of the tag nodes may be used to define approximately 20 tag nodes, while concentric spheres can extend the number of tag nodes to several hundred.

  11. LED Record Efficacy and Brightness

    Broader source: Energy.gov [DOE]

    Designed for general lighting applications such as street, industrial, and parking garage lighting, the Cree XLamp® power LED sets new records for LED brightness and efficacy, up to 85 lm/W at 350 mA. The XLamp utilizes Cree's performance breakthrough EZBright™ LED chip; both products include technology that was developed in part with R&D funding support from DOE.

  12. Using LEDs | Department of Energy

    Energy Savers [EERE]

    compact profile, superior optical control, energy efficiency, breakage resistance, reduced maintenance, and long life-LEDs are well suited to a variety of lighting applications. ...

  13. Demonstration of LED Street Lighting

    SciTech Connect (OSTI)

    Kinzey, B. R.; Royer, M. P.; Hadjian, M.; Kauffman, R.

    2013-06-01

    GATEWAY program and Municipal Solid-State Street Lighting Consortium report on a demonstration of LED street lighting in Kansas City, MO.

  14. Upgrading Troffer Luminaires to LED

    SciTech Connect (OSTI)

    none,

    2014-01-31

    Solid-state lighting technology fact sheet providing guidance on the various factors to consider when deciding on an LED upgrade for a fluorescent troffer system.

  15. LED Lighting | Department of Energy

    Office of Environmental Management (EM)

    of lighting in the United States. Residential LEDs -- especially ENERGY STAR rated products -- use at least 75% less energy, and last 25 times longer, than incandescent lighting. ...

  16. GATEWAY Demonstrations: LED Street Lighting

    SciTech Connect (OSTI)

    Cook, Tyson; Shackelford, Jordan; Pang, Terrance Pang

    2008-12-01

    This report summarizes an assessment project conducted to study the performance of light emitting diode (LED) luminaires in a street lighting application in San Francisco, CA.

  17. Reporting LED Luminaire Product Performance

    SciTech Connect (OSTI)

    2008-12-01

    This brochure on LED product performance is an outcome of a joint DOE-NGLIA effort to assure and improve the quality of SSL products.

  18. Infrared tag and track technique

    DOE Patents [OSTI]

    Partin, Judy K.; Stone, Mark L.; Slater, John; Davidson, James R.

    2007-12-04

    A method of covertly tagging an object for later tracking includes providing a material capable of at least one of being applied to the object and being included in the object, which material includes deuterium; and performing at least one of applying the material to the object and including the material in the object in a manner in which in the appearance of the object is not changed, to the naked eye.

  19. Phase modulation in RF tag

    DOE Patents [OSTI]

    Carrender, Curtis Lee; Gilbert, Ronald W.

    2007-02-20

    A radio frequency (RF) communication system employs phase-modulated backscatter signals for RF communication from an RF tag to an interrogator. The interrogator transmits a continuous wave interrogation signal to the RF tag, which based on an information code stored in a memory, phase-modulates the interrogation signal to produce a backscatter response signal that is transmitted back to the interrogator. A phase modulator structure in the RF tag may include a switch coupled between an antenna and a quarter-wavelength stub; and a driver coupled between the memory and a control terminal of the switch. The driver is structured to produce a modulating signal corresponding to the information code, the modulating signal alternately opening and closing the switch to respectively decrease and increase the transmission path taken by the interrogation signal and thereby modulate the phase of the response signal. Alternatively, the phase modulator may include a diode coupled between the antenna and driver. The modulating signal from the driver modulates the capacitance of the diode, which modulates the phase of the response signal reflected by the diode and antenna.

  20. LED Watch: How Safe Is the Light from LEDs?

    Energy Savers [EERE]

    It's important to note that there's about LED safety focus on what's known no difference between the type of vis- as "blue light," which is light in the violet ible radiant energy ...

  1. Metacapacitors for LED Lighting: Metacapacitors

    SciTech Connect (OSTI)

    2010-09-02

    ADEPT Project: The CUNY Energy Institute is developing less expensive, more efficient, smaller, and longer-lasting power converters for energy-efficient LED lights. LEDs produce light more efficiently than incandescent lights and last significantly longer than compact fluorescent bulbs, but they require more sophisticated power converter technology, which increases their cost. LEDs need more sophisticated converters because they require a different type of power (low voltage direct current, or DC) than what's generally supplied by power outlets. The CUNY Energy Institute is developing sophisticated power converters for LEDs that contain capacitors made from new, nanoscale materials. Capacitors are electrical components that are used to store energy. CUNY's unique capacitors are configured with advanced power circuits to more efficiently control and convert power to the LED lighting source. They also eliminate the need for large magnetic components, instead relying on networks of capacitors that can be easily printed on plastic substrate. CUNY's prototype LED power converter already meets DOE's 2020 projections for the energy efficiency of LED power converters.

  2. Maintenance Practices for LED Streetlights

    Office of Energy Efficiency and Renewable Energy (EERE)

    This April 14, 2014 webinar answered important questions about the maintenance and reliability of LED streetlights, and how to take these issues into account when planning and preparing for a...

  3. LED Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    focusing light in ways that are useful in homes and commercial settings. The light-emitting diode (LED) is one of today's most energy-efficient and rapidly-developing lighting...

  4. Demonstration Assessment of LED Roadway Lighting: Philadelphia...

    Office of Scientific and Technical Information (OSTI)

    LED Roadway Lighting: Philadelphia, PA Royer, Michael P.; Tuenge, Jason R.; Poplawski, Michael E. Roadway Lighting; Solid-state lighting; LED lighting; SSL; LED; GATEWAY Roadway...

  5. LED Frequently Asked Questions | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Frequently Asked Questions LED Frequently Asked Questions EERE Solid-State Lighting LED Factsheet PDF icon ledbasics.pdf More Documents & Publications LED Frequently Asked ...

  6. Recessed LED Downlights | Department of Energy

    Energy Savers [EERE]

    Recessed LED Downlights Recessed LED Downlights A Dept of Energy Solid-State Lighting Program technology fact sheet on recessed LED downlights. PDF icon recesseddownlight.pdf More ...

  7. Power Tagging Technologies | Open Energy Information

    Open Energy Info (EERE)

    Superior, Colorado Zip: 80027 Product: Colorado-based developer of advanced digital signal processing technologies that enable real-time "power tagging" on the grid....

  8. tagging API | OpenEI Community

    Open Energy Info (EERE)

    REEEP REEGLE structured tagging API Reegle and OpenEI share the vision that easy access to energy information will help drive future developments in clean energy development....

  9. Tag: manufacturing | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    manufacturing Tag: manufacturing Displaying 1 - 8 of 8... Category: News Tool of tomorrow today Y-12 and other Nuclear Security Enterprise sites investigate industry's next...

  10. Tag: Suppliers | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tag: Suppliers Displaying 1 - 10 of 38... Category: Suppliers Container Technologies Industries, LLC receives small business award CNS recently honored Container Technologies...

  11. Tag: History | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    History Tag: History Displaying 1 - 10 of 119... Category: About Deputy Secretary meets two calutron girls When the Deputy Secretary of Energy, Elizabeth Sherwood-Randall, was in...

  12. DOE Research and Development Accomplishments Tag Cloud

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Database Tag Cloud This tag cloud is a specific type of weighted list that provides a quick look at the content of the DOE R&D Accomplishments database. It can be easily browsed because terms are in alphabetical order. With this tag cloud, there is a direct correlation between font size and quantity. The more times a term appears in the bibliographic citations, the larger the font size. This tag cloud is also interactive. Clicking on a term will activate a search for that term. Search

  13. To tag or not to tag: animal welfare, conservation and stakeholder considerations in fish tracking studies that use electronic tags

    SciTech Connect (OSTI)

    Cooke, Steven J.; Nguyen, Vivian M.; Murchie, Karen J.; Thiem, Jason D.; Donaldson, Michael R.; Hinch, Scott G.; Brown, Richard S.; Fisk, Aaron

    2013-11-01

    The advent and widespread adoption of electronic tags (including biotelemetry and biologging devices) for tracking animals has provided unprecedented information on the biology, management, and conservation of fish in the world’s oceans and inland waters. However, use of these tools is not without controversy. Even when scientific and management objectives may best be achieved using electronic tags, it is increasingly important to further consider other factors such as the welfare of tagged animals (i.e., the role of training and science-based surgical guidelines, anesthetic use, inability to maintain sterile conditions in field environments), the ethics of tagging threatened species vs. using surrogates, stakeholder perspectives on tagging (including aboriginals), as well as use of data emanating from such studies (e.g., by fishers to facilitate exploitation). Failure to do so will have the potential to create conflict and undermine scientific, management and public confidence in the use of this powerful tool. Indeed, there are already a number of examples of where tracking studies using electronic tags have been halted based on concerns raised by researchers, authorities, or stakeholders. Here we present a candid evaluation of several factors that should be considered when determining when to tag or not to tag fish with electronic devices. It is not our objective to judge the merit of previous studies. Rather, we hope to stimulate debate and discussion regarding the use of electronic tags to study fish. Relatedly, there is a need for more research to address these questions (e.g., what level of cleanliness is needed when conducting surgeries, what type of training should be required for fish surgery) including human dimensions studies to understand perspectives of different actors including society as a whole with respect to tagging and tracking studies.

  14. Method and apparatus for manufacturing gas tags

    DOE Patents [OSTI]

    Gross, K.C.; Laug, M.T.

    1996-12-17

    For use in the manufacture of gas tags employed in a gas tagging failure detection system for a nuclear reactor, a plurality of commercial feed gases each having a respective noble gas isotopic composition are blended under computer control to provide various tag gas mixtures having selected isotopic ratios which are optimized for specified defined conditions such as cost. Using a new approach employing a discrete variable structure rather than the known continuous-variable optimization problem, the computer controlled gas tag manufacturing process employs an analytical formalism from condensed matter physics known as stochastic relaxation, which is a special case of simulated annealing, for input feed gas selection. For a tag blending process involving M tag isotopes with N distinct feed gas mixtures commercially available from an enriched gas supplier, the manufacturing process calculates the cost difference between multiple combinations and specifies gas mixtures which approach the optimum defined conditions. The manufacturing process is then used to control tag blending apparatus incorporating tag gas canisters connected by stainless-steel tubing with computer controlled valves, with the canisters automatically filled with metered quantities of the required feed gases. 4 figs.

  15. Method and apparatus for manufacturing gas tags

    DOE Patents [OSTI]

    Gross, Kenny C.; Laug, Matthew T.

    1996-01-01

    For use in the manufacture of gas tags employed in a gas tagging failure detection system for a nuclear reactor, a plurality of commercial feed gases each having a respective noble gas isotopic composition are blended under computer control to provide various tag gas mixtures having selected isotopic ratios which are optimized for specified defined conditions such as cost. Using a new approach employing a discrete variable structure rather than the known continuous-variable optimization problem, the computer controlled gas tag manufacturing process employs an analytical formalism from condensed matter physics known as stochastic relaxation, which is a special case of simulated annealing, for input feed gas selection. For a tag blending process involving M tag isotopes with N distinct feed gas mixtures commercially available from an enriched gas supplier, the manufacturing process calculates the cost difference between multiple combinations and specifies gas mixtures which approach the optimum defined conditions. The manufacturing process is then used to control tag blending apparatus incorporating tag gas canisters connected by stainless-steel tubing with computer controlled valves, with the canisters automatically filled with metered quantities of the required feed gases.

  16. Multicolor, High Efficiency, Nanotextured LEDs

    SciTech Connect (OSTI)

    Jung Han; Arto Nurmikko

    2011-09-30

    We report on research results in this project which synergize advanced material science approaches with fundamental optical physics concepts pertaining to light-matter interaction, with the goal of solving seminal problems for the development of very high performance light emitting diodes (LEDs) in the blue and green for Solid State Lighting applications. Accomplishments in the duration of the contract period include (i) heteroepitaxy of nitrogen-polar LEDs on sapphire, (ii) heteroepitaxy of semipolar (11{bar 2}2) green LEDs on sapphire, (iii) synthesis of quantum-dot loaded nanoporous GaN that emits white light without phosphor conversion, (iv) demonstration of the highest quality semipolar (11{bar 2}2) GaN on sapphire using orientation-controlled epitaxy, (v) synthesis of nanoscale GaN and InGaN medium, and (vi) development of a novel liftoff process for manufacturing GaN thin-film vertical LEDs. The body of results is presented in this report shows how a solid foundation has been laid, with several noticeable accomplishments, for innovative research, consistent with the stated milestones.

  17. LED lamp power management system and method

    DOE Patents [OSTI]

    Gaines, James; Clauberg, Bernd; Van Erp, Josephus A. M.

    2013-03-19

    An LED lamp power management system and method including an LED lamp having an LED controller 58; a plurality of LED channels 60 operably connected to the LED controller 58, each of the plurality of LED channels 60 having a channel switch 62 in series with at least one shunted LED circuit 83, the shunted LED circuit 83 having a shunt switch 68 in parallel with an LED source 80. The LED controller 58 reduces power loss in one of the channel switch 62 and the shunt switch 68 when LED lamp electronics power loss (P.sub.loss) exceeds an LED lamp electronics power loss limit (P.sub.lim); and each of the channel switches 62 receives a channel switch control signal 63 from the LED controller 58 and each of the shunt switches 68 receives a shunt switch control signal 69 from the LED controller 58.

  18. LED lamp color control system and method

    SciTech Connect (OSTI)

    Gaines, James; Clauberg, Bernd; Van Erp, Josephus A.M.

    2013-02-05

    An LED lamp color control system and method including an LED lamp having an LED controller 58; and a plurality of LED channels 60 operably connected to the LED controller 58, each of the plurality of LED channels 60 having a channel switch 62 in series with at least one shunted LED circuit 83, the shunted LED circuit 83 having a shunt switch 68 in parallel with an LED source 80. The LED controller 58 determines whether the LED source 80 is in a feedback controllable range, stores measured optical flux for the LED source 80 when the LED source 80 is in the feedback controllable range, and bypasses storing the measured optical flux when the LED source 80 is not in the feedback controllable range.

  19. Communication methods, systems, apparatus, and devices involving RF tag registration

    DOE Patents [OSTI]

    Burghard, Brion J.; Skorpik, James R.

    2008-04-22

    One technique of the present invention includes a number of Radio Frequency (RF) tags that each have a different identifier. Information is broadcast to the tags from an RF tag interrogator. This information corresponds to a maximum quantity of tag response time slots that are available. This maximum quantity may be less than the total number of tags. The tags each select one of the time slots as a function of the information and a random number provided by each respective tag. The different identifiers are transmitted to the interrogator from at least a subset of the RF tags.

  20. Tag gas capsule with magnetic piercing device

    DOE Patents [OSTI]

    Nelson, Ira V.

    1976-06-22

    An apparatus for introducing a tag (i.e., identifying) gas into a tubular nuclear fuel element. A sealed capsule containing the tag gas is placed in the plenum in the fuel tube between the fuel and the end cap. A ferromagnetic punch having a penetrating point is slidably mounted in the plenum. By external electro-magnets, the punch may be caused to penetrate a thin rupturable end wall of the capsule and release the tag gas into the fuel element. Preferably the punch is slidably mounted within the capsule, which is in turn loaded as a sealed unit into the fuel element.

  1. LED MR16 Lamps | Department of Energy

    Energy Savers [EERE]

    LED MR16 Lamps LED MR16 Lamps A U.S. DOE Solid-State Lighting Program technology fact sheet on LED MR16 lamps. PDF icon ledmr16-lamps.pdf More Documents & Publications Report ...

  2. LedEngin Inc | Open Energy Information

    Open Energy Info (EERE)

    LedEngin Inc Jump to: navigation, search Name: LedEngin, Inc Place: Santa Clara, California Zip: 95054 Product: Developer of Light Emitting Diode (LED) technology for medical and...

  3. Comparative Performance of Acoustic-tagged and PIT-tagged Juvenile Salmonids

    SciTech Connect (OSTI)

    Hockersmith, Eric E.; Brown, Richard S.; Liedtke, Theresa L.

    2008-02-01

    Numerous research tools and technologies are currently being used to evaluate fish passage and survival to determine the impacts of the Federal Columbia River Power System (FCRPS) on endangered and threatened juvenile salmonids, including PIT tags, balloon tags, hydroacoustic evaluations, radio telemetry, and acoustic telemetry. Each has advantages and disadvantages, but options are restricted in some situations because of limited capabilities of a specific technology, lack of detection capability downstream, or availability of adequate numbers of fish. However, there remains concern about the comparative effects of the tag or the tagging procedure on fish performance. The recently developed Juvenile Salmonid Acoustic Telemetry System (JSATS) acoustic transmitter is the smallest active acoustic tag currently available. The goal of this study was to determine whether fish tagged with the JSATS acoustic-telemetry tag can provide unbiased estimates of passage behavior and survival within the performance life of the tag. We conducted both field and laboratory studies to assess tag effects. For the field evaluation we released a total of 996 acoustic-tagged fish in conjunction with 21,026 PIT-tagged fish into the tailrace of Lower Granite Dam on 6 and 13 May. Travel times between release and downstream dams were not significantly different for the majority of the reaches between acoustic-tagged and PIT-tagged fish. In addition to the field evaluation, a series of laboratory experiments were conducted to determine if growth and survival of juvenile Chinook salmon surgically implanted with acoustic transmitters is different than untagged or PIT tagged juvenile Chinook salmon. Only yearling fish with integrated and non-integrated transmitters experienced mortalities, and these were low (<4.5%). Mortality among sub-yearling control and PIT-tag treatments ranged up to 7.7% while integrated and non-integrated treatments had slightly higher rates (up to 8.3% and 7

  4. LED North America - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Understanding SSL » LED Basics LED Basics Unlike incandescent lamps, LEDs are not inherently white light sources. Instead, LEDs emit nearly monochromatic light, making them highly efficient for colored light applications such as traffic lights and exit signs. However, to be used as a general light source, white light is needed. White light can be achieved with LEDs in three ways: Phosphor conversion, in which a phosphor is used on or near the LED to convert the colored light to white light RGB

  5. Federally Led Accident Investigation Reports | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federally Led Accident Investigation Reports Federally Led Accident Investigation Reports Includes Pre-March 2011 Type A Reports June 1, 1999 Type A Accident Investigation Board...

  6. LED Outdoor Area Lighting Fact Sheet

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Light distribution and glare LED luminaires use different optics than MH or HPS lamps ... illuminance are possible with LEDs and close-coupled optics, compared to HID luminaires. ...

  7. Philadelphia International Airport Apron Lighting: LED System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Philadelphia International Airport Apron Lighting: LED System Performance in a Trial Installation Philadelphia International Airport Apron Lighting: LED System Performance in a ...

  8. Magnetic vector field tag and seal

    DOE Patents [OSTI]

    Johnston, Roger G.; Garcia, Anthony R.

    2004-08-31

    One or more magnets are placed in a container (preferably on objects inside the container) and the magnetic field strength and vector direction are measured with a magnetometer from at least one location near the container to provide the container with a magnetic vector field tag and seal. The location(s) of the magnetometer relative to the container are also noted. If the position of any magnet inside the container changes, then the measured vector fields at the these locations also change, indicating that the tag has been removed, the seal has broken, and therefore that the container and objects inside may have been tampered with. A hollow wheel with magnets inside may also provide a similar magnetic vector field tag and seal. As the wheel turns, the magnets tumble randomly inside, removing the tag and breaking the seal.

  9. User Interface Program for secure electronic tags

    SciTech Connect (OSTI)

    Cai, Y.; Koehl, E.R.; Carlson, R.D.; Raptis, A.C.

    1995-05-01

    This report summarizes and documents the efforts of Argonne National Laboratory (ANL) in developing a secure tag communication user interface program comprising a tag monitor and a communication tool. This program can perform the same functions as the software that was developed at the Lawrence Livermore National Laboratory (LLNL), but it is enhanced with a user-friendly screen. It represents the first step in updating the TRANSCOM Tracking System (TRANSCOM) by incorporating a tag communication screen menu into the main menu of the TRANSCOM user program. A working version of TRANSCOM, enhanced with ANL secure-tag graphics, will strongly support the Department of Energy Warhead Dismantlement/Special Nuclear Materials Control initiatives. It will allow commercial satellite tracking of the movements and operational activities of treaty-limited items and transportation vehicles throughout Europe and the former USSR, as well as the continental US.

  10. Tag: environment | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    environment Tag: environment Displaying 1 - 7 of 7... Category: News Y-12 completes waste removal project two years ahead of schedule Y-12 completed disposition of 2,247 containers ...

  11. Tag: careers | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    careers Tag: careers Displaying 1 - 9 of 9... Category: Careers West Point cadet, one of a kind summer intern He sets his sights high and goes after what he wants. I. Greer is now ...

  12. Solid tags for identifying failed reactor components

    DOE Patents [OSTI]

    Bunch, Wilbur L.; Schenter, Robert E.

    1987-01-01

    A solid tag material which generates stable detectable, identifiable, and measurable isotopic gases on exposure to a neutron flux to be placed in a nuclear reactor component, particularly a fuel element, in order to identify the reactor component in event of its failure. Several tag materials consisting of salts which generate a multiplicity of gaseous isotopes in predetermined ratios are used to identify different reactor components.

  13. b-tagging at D0

    SciTech Connect (OSTI)

    Hanagaki, K.; /Fermilab

    2005-07-01

    Many high p{sub T} physics analyses at the Tevatron contain a b-quark and hence a b-jet in the final states. We report on the b-jet identification methods in D0 and their performance. For 0.5% of light jet tagging rate, 40 or 45% of b-jet tagging efficiency is achieved for jets with 35 < E{sub T} < 55 GeV and |{eta}| < 1.2.

  14. Neural net controlled tag gas sampling system for nuclear reactors

    DOE Patents [OSTI]

    Gross, Kenneth C.; Laug, Matthew T.; Lambert, John D. B.; Herzog, James P.

    1997-01-01

    A method and system for providing a tag gas identifier to a nuclear fuel rod and analyze escaped tag gas to identify a particular failed nuclear fuel rod. The method and system include disposing a unique tag gas composition into a plenum of a nuclear fuel rod, monitoring gamma ray activity, analyzing gamma ray signals to assess whether a nuclear fuel rod has failed and is emitting tag gas, activating a tag gas sampling and analysis system upon sensing tag gas emission from a failed nuclear rod and evaluating the escaped tag gas to identify the particular failed nuclear fuel rod.

  15. Neural net controlled tag gas sampling system for nuclear reactors

    DOE Patents [OSTI]

    Gross, K.C.; Laug, M.T.; Lambert, J.B.; Herzog, J.P.

    1997-02-11

    A method and system are disclosed for providing a tag gas identifier to a nuclear fuel rod and analyze escaped tag gas to identify a particular failed nuclear fuel rod. The method and system include disposing a unique tag gas composition into a plenum of a nuclear fuel rod, monitoring gamma ray activity, analyzing gamma ray signals to assess whether a nuclear fuel rod has failed and is emitting tag gas, activating a tag gas sampling and analysis system upon sensing tag gas emission from a failed nuclear rod and evaluating the escaped tag gas to identify the particular failed nuclear fuel rod. 12 figs.

  16. LED Color Characteristics | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Color Characteristics LED Color Characteristics Reviews the fundamentals regarding light and color, summarizing the most important color issues related to white-light LED systems. (6 pages, April 2016) led-color-characteristics-factsheet.pdf (1.77 MB) More Documents & Publications Evaluating Color Rendition Using IES TM-30-15 LED Color Characteristics presentation slides: UNDERSTANDING AND APPLYING TM-30-15

  17. LED Essentials - Technology, Applications, Advantages, Disadvantages |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Information Resources » Webcasts » LED Essentials - Technology, Applications, Advantages, Disadvantages LED Essentials - Technology, Applications, Advantages, Disadvantages On October 11, 2007, Kevin Dowling, VP of Innovation for Philips Solid-State Lighting Solutions, presented a broad introduction to LED technology, and discussed the technology status, advantages and disadvantages, current applications, future potential, and evolving path of LED technology from

  18. Associated Particle Tagging (APT) in Magnetic Spectrometers

    SciTech Connect (OSTI)

    Jordan, David V.; Baciak, James E.; Stave, Sean C.; Chichester, David; Dale, Daniel; Kim, Yujong; Harmon, Frank

    2012-10-16

    Summary In Brief The Associated Particle Tagging (APT) project, a collaboration of Pacific Northwest National Laboratory (PNNL), Idaho National Laboratory (INL) and the Idaho State University (ISU)/Idaho Accelerator Center (IAC), has completed an exploratory study to assess the role of magnetic spectrometers as the linchpin technology in next-generation tagged-neutron and tagged-photon active interrogation (AI). The computational study considered two principle concepts: (1) the application of a solenoidal alpha-particle spectrometer to a next-generation, large-emittance neutron generator for use in the associated particle imaging technique, and (2) the application of tagged photon beams to the detection of fissile material via active interrogation. In both cases, a magnetic spectrometer momentum-analyzes charged particles (in the neutron case, alpha particles accompanying neutron generation in the D-T reaction; in the tagged photon case, post-bremsstrahlung electrons) to define kinematic properties of the relevant neutral interrogation probe particle (i.e. neutron or photon). The main conclusions of the study can be briefly summarized as follows: Neutron generator: • For the solenoidal spectrometer concept, magnetic field strengths of order 1 Tesla or greater are required to keep the transverse size of the spectrometer smaller than 1 meter. The notional magnetic spectrometer design evaluated in this feasibility study uses a 5-T magnetic field and a borehole radius of 18 cm. • The design shows a potential for 4.5 Sr tagged neutron solid angle, a factor of 4.5 larger than achievable with current API neutron-generator designs. • The potential angular resolution for such a tagged neutron beam can be less than 0.5o for modest Si-detector position resolution (3 mm). Further improvement in angular resolution can be made by using Si-detectors with better position resolution. • The report documents several features of a notional generator design incorporating the

  19. A brief examination of optical tagging technologies.

    SciTech Connect (OSTI)

    Ackermann, Mark R.; Cahill, Paul A. (Aspecular Optics, Dayton, OH); Drummond, Timothy J.; Wilcoxon, Jess Patrick

    2003-07-01

    Presented within this report are the results of a brief examination of optical tagging technologies funded by the Laboratory Directed Research and Development (LDRD) program at Sandia National Laboratories. The work was performed during the summer months of 2002 with total funding of $65k. The intent of the project was to briefly examine a broad range of approaches to optical tagging concentrating on the wavelength range between ultraviolet (UV) and the short wavelength infrared (SWIR, {lambda} < 2{micro}m). Tagging approaches considered include such things as simple combinations of reflective and absorptive materials closely spaced in wavelength to give a high contrast over a short range of wavelengths, rare-earth oxides in transparent binders to produce a narrow absorption line hyperspectral tag, and fluorescing materials such as phosphors, dies and chemically precipitated particles. One technical approach examined in slightly greater detail was the use of fluorescing nano particles of metals and semiconductor materials. The idea was to embed such nano particles in an oily film or transparent paint binder. When pumped with a SWIR laser such as that produced by laser diodes at {lambda}=1.54{micro}m, the particles would fluoresce at slightly longer wavelengths, thereby giving a unique signal. While it is believed that optical tags are important for military, intelligence and even law enforcement applications, as a business area, tags do not appear to represent a high on return investment. Other government agencies frequently shop for existing or mature tag technologies but rarely are interested enough to pay for development of an untried technical approach. It was hoped that through a relatively small investment of laboratory R&D funds, enough technologies could be identified that a potential customers requirements could be met with a minimum of additional development work. Only time will tell if this proves to be correct.

  20. LED Lighting Facts | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research & Development » Technology Application R&D » LED Lighting Facts LED Lighting Facts LED lighting facts - A Program of the U.S. DOE DOE's LED Lighting Facts® program showcases LED products for general illumination from manufacturers who commit to testing products and reporting performance results according to industry standards. For lighting buyers, designers, and energy efficiency programs, the program provides information essential to evaluating SSL products. Central to the

  1. LED Frequently Asked Questions | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Frequently Asked Questions LED Frequently Asked Questions This document provides answers to LED frequently asked questions for plant-wide improvements, such as "Are LEDs ready for general lighting?" LED Frequently Asked Questions (May 2011) (344.41 KB) More Documents & Publications LED Frequently Asked Questions Lighting Designer Roundtable on Solid-State Lighting SSL R&D Multi-Year Program Plan

  2. LED Lighting Facts | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research & Development » Technology Application R&D » LED Lighting Facts LED Lighting Facts LED lighting facts - A Program of the U.S. DOE DOE's LED Lighting Facts® program showcases LED products for general illumination from manufacturers who commit to testing products and reporting performance results according to industry standards. For lighting buyers, designers, and energy efficiency programs, the program provides information essential to evaluating SSL products. Central to the

  3. LED Lighting Forecast | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Publications » Market Studies » LED Lighting Forecast LED Lighting Forecast The DOE report Energy Savings Forecast of Solid-State Lighting in General Illumination Applications estimates the energy savings of LED white-light sources over the analysis period of 2013 to 2030. With declining costs and improving performance, LED products have been seeing increased adoption for general illumination applications. This is a positive development in terms of energy consumption, as LEDs use significantly

  4. B mixing and flavor tagging at CDF

    SciTech Connect (OSTI)

    Russ, James S.; /Carnegie Mellon U.

    2004-12-01

    The CDF Collaboration has made a preliminary measurement of B{sub d} mixing as a first step toward measuring mixing in the B{sub s} system. Flavor tagging using opposite-side jets and muons as well as same-side tagging schemes have been applied. Results agree well with precise results from the B-factories. They use these results to estimate CDF's B{sub s} mixing range using the present data set ({approx} 250 pb{sup -1}) and extrapolate to the potential from larger data sets in future running.

  5. SemiLEDs | Open Energy Information

    Open Energy Info (EERE)

    SemiLEDs Place: Boise, Idaho Zip: 83702 Product: US-based LED chip maker with Asia manufacturing operations. Coordinates: 43.60698, -116.193409 Show Map Loading map......

  6. LEDs for Street Lighting—Here Today

    SciTech Connect (OSTI)

    2013-11-29

    Fact sheet that provides a brief overview of the viability of LED street lighting in municipalities and highlights case studies of two cities—Los Angeles and Seattle—that have invested in LED street lighting.

  7. Decisions that led to Y-12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Decisions that led to Y-12 Last week we saw the political and organizational changes that led up to the Manhattan Project being created on August 13, 1942. The S-1 Executive ...

  8. Final decisions that led to Y-12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    decisions that led to Y-12 As we have seen earlier in this series, Ernest O. Lawrence and ... By late 1942, progress on the reactor technology being led by Enrico Fermi at the ...

  9. Updating the LED Life Cycle Assessment

    Energy Savers [EERE]

    Part 2: LED Manufacturing and Performance 7 Goal of the New Study Review new literature on the life- cycle assessment of LED products. Determine if newer A-19 products...

  10. LED R&D | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    DOE-funded LED R&D projects tackle the science and technology challenges that stand in the way of achieving SSL Program targets for LED efficacy, performance, and cost. All project ...

  11. LED Solutions for the Dark Hours

    Energy Savers [EERE]

    technologies 5 LEDs for Street and Roadway Lighting Portland, OR Philadelphia, PA New York, NY Kansas City, MO 6 Boston Las Vegas Seattle Number of LED Replacements to Date (4...

  12. LED Lighting Basics | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LED Lighting Basics LED Lighting Basics August 16, 2013 - 10:07am Addthis Light-emitting diodes (LEDs) efficiently produce light in a fundamentally different way than any legacy or traditional light source. LEDs are compound semiconductor devices that produce light when an appropriate electrical current is applied. Applying electrical current causes electrons to flow from one material in the structure to another and this in turn causes a series of complex interactions at an atomic level that

  13. LED Lighting in a Performing Arts Center

    SciTech Connect (OSTI)

    Wilkerson, A. M.; Abell, T. C.; T., E. Perrin

    2015-07-31

    GATEWAY demonstration report of LED wall washer retrofit lighting at the University of Maryland Clarice Smith Performing Arts Center.

  14. LED Watch: The Outlook for OLEDs

    Broader source: Energy.gov [DOE]

    December 2014 LED Watch: The Outlook for OLEDs James Brodrick, U.S. Department of Energy LD+A Magazine

  15. LED Lighting: Just the Facts, Please!

    Broader source: Energy.gov [DOE]

    Now there's another arsenal in the toolbox to help consumers find LED lights they can trust: the Lighting Facts™ label.

  16. Have You Used LED Light Strings?

    Broader source: Energy.gov [DOE]

    This week, you read about LED holiday light strings, which can use 90% less energy than regular incandescent light strings.

  17. LED Color Characteristics | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    DOE EERE Building Technologies Program Solid-State Lighting fact sheet led-color-characteristics-factsheet.pdf (804.38 KB) More Documents & Publications LED Color Characteristics Evaluating Color Rendition Using IES TM-30-15 Report 23: Photometric Testing of White Tunable LED Luminaires

  18. LED Market Adoption: Status and Trends

    Energy Savers [EERE]

    (lmW) 67 60 CCT (K) 3000 3500 L 70 (hours) 28,000 36,000 Price (unit) 23 30 18 LED Linear Fixtures 19 T12 26% T8 67% T5 7% LED Lamp <1% LED Luminaire <1% 2012 T12 17% T8 72%...

  19. Imaging mass spectrometer with mass tags

    DOE Patents [OSTI]

    Felton, James S.; Wu, Kuang Jen; Knize, Mark G.; Kulp, Kristen S.; Gray, Joe W.

    2010-06-01

    A method of analyzing biological material by exposing the biological material to a recognition element, that is coupled to a mass tag element, directing an ion beam of a mass spectrometer to the biological material, interrogating at least one region of interest area from the biological material and producing data, and distributing the data in plots.

  20. Imaging mass spectrometer with mass tags

    DOE Patents [OSTI]

    Felton, James S.; Wu, Kuang Jen J.; Knize, Mark G.; Kulp, Kristen S.; Gray, Joe W.

    2013-01-29

    A method of analyzing biological material by exposing the biological material to a recognition element, that is coupled to a mass tag element, directing an ion beam of a mass spectrometer to the biological material, interrogating at least one region of interest area from the biological material and producing data, and distributing the data in plots.

  1. Dual LED/incandescent security fixture

    DOE Patents [OSTI]

    Gauna, Kevin Wayne

    2005-06-21

    A dual LED and incandescent security lighting system uses a hybrid approach to LED illumination. It combines an ambient LED illuminator with a standard incandescent lamp on a motion control sensor. The LED illuminator will activate with the onset of darkness (daylight control) and typically remain on during the course of the night ("always on"). The LED illumination, typically amber, is sufficient to provide low to moderate level lighting coverage to the wall and ground area adjacent to and under the fixture. The incandescent lamp is integrated with a motion control circuit and sensor. When movement in the field of view is detected (after darkness), the incandescent lamp is switched on, providing an increased level of illumination to the area. Instead of an "always on" LED illuminator, the LEDs may also be switched off when the incandescent lamp is switched on.

  2. eTag 1.8.2 - January 14, 2015

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    are able to fill in some details for this project. As previously communicated, the migration to eTag spec 1.8.2 is scheduled for midnight CST on 33115. Tag submitted before...

  3. A Practical Primer to LED Technology | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Practical Primer to LED Technology A Practical Primer to LED Technology PDF icon A Practical Primer to LED Technology More Documents & Publications LED LUMINAIRE LIFETIME: ...

  4. System Reliability for LED-Based Products

    SciTech Connect (OSTI)

    Davis, J Lynn; Mills, Karmann; Lamvik, Michael; Yaga, Robert; Shepherd, Sarah D; Bittle, James; Baldasaro, Nick; Solano, Eric; Bobashev, Georgiy; Johnson, Cortina; Evans, Amy

    2014-04-07

    Results from accelerated life tests (ALT) on mass-produced commercially available 6” downlights are reported along with results from commercial LEDs. The luminaires capture many of the design features found in modern luminaires. In general, a systems perspective is required to understand the reliability of these devices since LED failure is rare. In contrast, components such as drivers, lenses, and reflector are more likely to impact luminaire reliability than LEDs.

  5. LED PAR38 Lamps | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research & Development » Technology Application R&D » CALiPER Testing » Application Reports » LED PAR38 Lamps LED PAR38 Lamps The following CALiPER reports provide a detailed investigation of LED PAR38 lamp performance, covering basic performance characteristics as well as subjective evaluation of beam, shadow, and color quality. Further analysis is provided on flicker, dimming, and power quality characteristics; stress testing; lumen and chromaticity maintenance; and chromaticity

  6. LEDS Events Calendar | Open Energy Information

    Open Energy Info (EERE)

    Page Edit History LEDS Events Calendar (Redirected from CLEAN Calendar) Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports...

  7. LEDS Events Calendar | Open Energy Information

    Open Energy Info (EERE)

    Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History LEDS Events Calendar Jump to: navigation, search Home | About | Inventory | Partnerships |...

  8. Category:LEDS Toolkit | Open Energy Information

    Open Energy Info (EERE)

    meant to support the creation and implementation of a Low Emission Development Strategy. Pages in category "LEDS Toolkit" The following 14 pages are in this category, out of...

  9. Using LEDs to Their Best Advantage

    SciTech Connect (OSTI)

    none,

    2012-01-01

    Solid-state lighting program technology fact sheet that explores the unique attributes of LEDs, which may make them the right choice for some applications.

  10. Demonstration Assessment of LED Parking Structure Lighting

    SciTech Connect (OSTI)

    Kinzey, B. R.; Myer, M. A.

    2013-03-01

    GATEWAY program report on a demonstration of LED parking structure lighting at the U.S. Dept. of Labor headquarters in Washington, DC.

  11. LED Lighting Facts Snapshot: Indoor Ambient Lighting

    SciTech Connect (OSTI)

    2013-04-01

    LED Lighting Facts Snapshot reports reveal how today's products really perform, drawing on analysis of verified performance data from the program's online product list.

  12. Municipal Consortium LED Street Lighting Workshop Presentations...

    Broader source: Energy.gov (indexed) [DOE]

    Workshop Agenda DOE Municipal Solid-State Street Lighting Consortium James Brodrick, U.S. Department of Energy Boston's LED Street Lighting Initiative Joanne Massaro, Glenn Cooper, ...

  13. Commercial Lighting and LED Lighting Incentives | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Schools Institutional Savings Category Lighting Lighting ControlsSensors Other EE LED Lighting Maximum Rebate Up to 100% of cost; incentives that exceed 5,000 should be...

  14. LED Directional Lamps | Department of Energy

    Energy Savers [EERE]

    Directional Lamps LED Directional Lamps BTP EERE Solid-State Lighting Program PDF icon leddirectionallamps.pdf More Documents & Publications Energy Savings Estimates of Light ...

  15. LED Replacements for Linear Fluorescent Lamps Webcast

    Broader source: Energy.gov [DOE]

    In this June 20, 2011 webcast on LED products marketed as replacements for linear fluorescent lamps, Jason Tuenge of the Pacific Northwest National Laboratory (PNNL) discussed current Lighting...

  16. Municipal Consortium LED Street Lighting Workshop Presentations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    City of Los Angeles Bureau of Street Lighting San Jose's "Smart" LED Streetlights: Controlled Amy Olay, City of San Jose Adaptive Lighting Controls Panel David Bueno, ...

  17. Dimming LEDs: What You Need to Know

    Broader source: Energy.gov [DOE]

    This December 10, 2012 webcast presented information on the challenges and opportunities facing users trying to dim LED light sources today, reviewing the major types of deployed dimming...

  18. A Practical Primer to LED Technology

    Energy Savers [EERE]

    ssl.energy.gov 2011 LED Transformations, LLC 60 Acknowledgements Support for the development and presentation of this educational seminar was provided by the US Department of...

  19. Municipal Consortium LED Street Lighting Workshop Presentations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Workshop Agenda ONCOR LED Streetlight Pilot & Technical Evaluation Update Michael Navarro, ONCOR Reading, Understanding, and Applying the LM-80 Standard Chad Stalker, Philips ...

  20. Successful Selection of LED Streetlight Luminaires: Optimizing...

    Broader source: Energy.gov (indexed) [DOE]

    This March 6, 2013 webcast reviewed the factors involved in successful selection of LED streetlight luminaires. Presenters Eric Haugaard of Cree Lighting and Chad Stalker of ...

  1. Solid State Lighting LED Manufacturing Roundtable Summary

    SciTech Connect (OSTI)

    none,

    2010-03-31

    Summary of a meeting of LED experts to develop proposed priority tasks for the Manufacturing R&D initiative, including task descriptions, discussion points, recommendations, and presentation highlights.

  2. Selected Isotopes for Optimized Fuel Assembly Tags

    SciTech Connect (OSTI)

    Gerlach, David C.; Mitchell, Mark R.; Reid, Bruce D.; Gesh, Christopher J.; Hurley, David E.

    2008-10-01

    In support of our ongoing signatures project we present information on 3 isotopes selected for possible application in optimized tags that could be applied to fuel assemblies to provide an objective measure of burnup. 1. Important factors for an optimized tag are compatibility with the reactor environment (corrosion resistance), low radioactive activation, at least 2 stable isotopes, moderate neutron absorption cross-section, which gives significant changes in isotope ratios over typical fuel assembly irradiation levels, and ease of measurement in the SIMS machine 2. From the candidate isotopes presented in the 3rd FY 08 Quarterly Report, the most promising appear to be Titanium, Hafnium, and Platinum. The other candidate isotopes (Iron, Tungsten, exhibited inadequate corrosion resistance and/or had neutron capture cross-sections either too high or too low for the burnup range of interest.

  3. Property:Event/Tagged | Open Energy Information

    Open Energy Info (EERE)

    +, CLEAN +, ... 15th International Business Forum: Low Carbon High Growth - Business Models for a Changing Climate + LEDS +, training +, CLEAN + 18th Africa Partnership Forum...

  4. Tag: Partnerships | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Partnerships Tag: Partnerships Displaying 1 - 10 of 38... Category: Partnerships Building virtual connections, saving real money Y-12 is talking robotics with college students a state away. More... Category: Partnerships Competing for a grade and our nuclear security UT students and Y-12 nuclear security subject matter experts conduct a battle board challenge in Oak Ridge. More... Category: Partnerships CNS represented at inaugural Energetics Consortium CNS was well represented at the first

  5. Tag: VPP | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    VPP Tag: VPP Displaying 1 - 4 of 4... Category: News Y-12 receives two significant safety awards For the tenth consecutive year, Y-12 received the National Safety Council's Occupational Excellence Achievement award. More... Category: About Voluntary Protection Program Protection against preventable illness and injury is not new to Y-12. Excellent tools already function toward keeping us healthy and safe on the job, and in June, Y-12 received the U.S. More... Category: About VPP Awareness Spring

  6. Tag: partnerships | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    partnerships Tag: partnerships Displaying 1 - 10 of 35... Category: Community Blount Partnership tours Y-12 Members of the Blount Partnership Chamber of Commerce toured the Y-12 National Security Complex. More... Category: Partnerships CNS represented at inaugural Energetics Consortium CNS was well represented at the first National Energetic Materials Consortium. More... Category: Partnerships Burn to Learn CNS fire protection engineers recently visited Oak Ridge Fire Department to "Burn to

  7. Scanning Cargo Containers with Tagged Neutrons

    SciTech Connect (OSTI)

    Viesti, G.; Botosso, C.; Fabris, D.; Lunardon, M.; Moretto, S.; Nebbia, G.; Pesente, S.; Zenoni, A.; Donzella, A.; Perot, B.; Carasco, C.; Bernard, S.; Mariani, A.; Szabo, J.-L.; Sannie, G.; Valkovic, V.; Sudac, D.; Nad, K.; Peerani, P.; Sequeira, V.

    2007-10-26

    A new Tagged Neutron Inspection System (TNIS) able to detect illicit materials such as explosives and narcotics in cargo containers has been developed within the EURopean Illicit TRAfficing Countermeasures Kit (EURITRACK) project. After the R and D phase, the inspection portal has been installed and commissioned at the Rijeka seaport in Croatia, where it has been operated in connection with the existing X-ray scanner for a first two-month demonstration campaign. Results obtained are presented and discussed in this paper.

  8. Tag: Awards | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Awards Tag: Awards Displaying 1 - 10 of 10... Category: News BES Technologies receives DOE small business award Mentor-Protégé relationship continues to receive Federal accolades. More... Category: News Y-12 honors its inventors with Technology Transfer awards Y-12 recently recognized 29 inventors at their annual Tech Transfer award ceremony. The group was awarded 13 patents and submitted more than 30 invention disclosures in the past year. More... Category: News Y-12 garners six NNSA

  9. Tag: Pantex | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Pantex Tag: Pantex Displaying 1 - 6 of 6... Category: News Construction Begins on New Administrative Support Complex at Pantex Groundbreaking ceremony for 343,000 square foot facility. More... Category: Community CNS-sponsored teams compete at DOE's National Science Bowl Our nation's capital recently played host to the country's future science and technology leaders during the U.S. Department of Energy's 26th National Science Bowl®. More... Category: News Pantex and Y-12: where science and

  10. Tag: construction | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    construction Tag: construction Displaying 1 - 10 of 14... Category: News Construction Begins on New Administrative Support Complex at Pantex Groundbreaking ceremony for 343,000 square foot facility. More... Category: News Y-12 Construction maintains 'superb' safety performance At a recent celebration, B&W Y-12's Direct-Hire Construction team was honored for two major safety achievements: more than one million hours worked without a lost-time accident and zero recordable injuries throughout

  11. Solving the 'Green Gap' in LED Technology

    Broader source: Energy.gov [DOE]

    One long-standing high-priority research area for DOE is to increase the efficiency of deep green LEDs. Although most products today use phosphor conversion (PC) to produce white light from a blue LED, having a good green source could lead to color-mixed white sources that would avoid the losses associated with the PC approach.

  12. Financing Guidance for LED Street Lighting Programs

    Broader source: Energy.gov [DOE]

    Financing an LED street lighting replacement program can present a hurdle for many system owners, even if the planned transition offers very favorable economics. Replacing the existing system requires a significant budget, particularly as the scope of the program increases. Cities such as Los Angeles and Seattle have invested many millions of dollars into their (very successful) LED street lighting replacement programs.

  13. Today LED Holiday Lights, Tomorrow the World?

    SciTech Connect (OSTI)

    Gordon, Kelly L.

    2004-12-20

    This article for The APEM Advantage, the quarterly newsletter of the Association of Professional Energy Managers (APEM) describes the recent increase in the popularity of light emitting diode (LED) lighting and compares LED light output with that of incandescent and compact fluorescent lighting.

  14. 100 LPW 800 Lm Warm White LED

    SciTech Connect (OSTI)

    Sun, Decai

    2010-10-31

    An illumination grade warm white (WW) LED, having correlated color temperature (CCT) between 2800 K and 3500K and capable of producing 800 lm output at 100 lm/W, has been developed in this program. The high power WW LED is an ideal source for use as replacement for incandescent, and Halogen reflector and general purpose lamps of similar lumen value. Over the two year period, we have made following accomplishments: developed a high power warm white LED product and made over 50% improvements in light output and efficacy. The new high power WW LED product is a die on ceramic surface mountable LED package. It has four 1x1 mm{sup 2} InGaN pump dice flip chip attached to a ceramic submount in 2x2 array, covered by warm white phosphor ceramic platelets called Lumiramica and an overmolded silicone lens encapsulating the LED array. The performance goal was achieved through breakthroughs in following key areas: (1) High efficiency pump LED development through pump LED active region design and epi growth quality improvement (funded by internal programs). (2) Increase in injection efficiency (IE) represented by reduction in forward voltage (V{sub f}) through the improvement of the silver-based p-contact and a reduction in spreading resistance. The injection efficiency was increased from 80% at the start of the program to 96% at the end of the program at 700 mA/mm{sup 2}. (3) Improvement in thermal design as represented by reduction in thermal resistance from junction to case, through improvement of the die to submount connection in the thin film flip chip (TFFC) LED and choosing the submount material of high thermal conductivity. A thermal resistance of 1.72 K/W was demonstrated for the high power LED package. (4) Improvement in extraction efficiency from the LED package through improvement of InGaN die level and package level optical extraction efficiency improvement. (5) Improvement in phosphor system efficiency by improving the lumen equivalent (LE) and phosphor package

  15. High Performance Green LEDs by Homoepitaxial

    SciTech Connect (OSTI)

    Wetzel, Christian; Schubert, E Fred

    2009-11-22

    This work's objective was the development of processes to double or triple the light output power from green and deep green (525 - 555 nm) AlGaInN light emitting diode (LED) dies within 3 years in reference to the Lumileds Luxeon II. The project paid particular effort to all aspects of the internal generation efficiency of light. LEDs in this spectral region show the highest potential for significant performance boosts and enable the realization of phosphor-free white LEDs comprised by red-green-blue LED modules. Such modules will perform at and outperform the efficacy target projections for white-light LED systems in the Department of Energy's accelerated roadmap of the SSL initiative.

  16. Tags, wireless communication systems, tag communication methods, and wireless communications methods

    DOE Patents [OSTI]

    Scott; Jeff W. , Pratt; Richard M.

    2006-09-12

    Tags, wireless communication systems, tag communication methods, and wireless communications methods are described. In one aspect, a tag includes a plurality of antennas configured to receive a plurality of first wireless communication signals comprising data from a reader, a plurality of rectifying circuits coupled with. respective individual ones of the antennas and configured to provide rectified signals corresponding to the first wireless communication signals, wherein the rectified signals are combined to produce a composite signal, an adaptive reference circuit configured to vary a reference signal responsive to the composite signal, a comparator coupled with the adaptive reference circuit and the rectifying circuits and configured to compare the composite signal with respect to the reference signal and to output the data responsive to the comparison, and processing circuitry configured to receive the data from the comparator and to process the data.

  17. High Power UV LED Industrial Curing Systems

    SciTech Connect (OSTI)

    Karlicek, Robert, F., Jr; Sargent, Robert

    2012-05-14

    UV curing is a green technology that is largely underutilized because UV radiation sources like Hg Lamps are unreliable and difficult to use. High Power UV LEDs are now efficient enough to replace Hg Lamps, and offer significantly improved performance relative to Hg Lamps. In this study, a modular, scalable high power UV LED curing system was designed and tested, performing well in industrial coating evaluations. In order to achieve mechanical form factors similar to commercial Hg Lamp systems, a new patent pending design was employed enabling high irradiance at long working distances. While high power UV LEDs are currently only available at longer UVA wavelengths, rapid progress on UVC LEDs and the development of new formulations designed specifically for use with UV LED sources will converge to drive more rapid adoption of UV curing technology. An assessment of the environmental impact of replacing Hg Lamp systems with UV LED systems was performed. Since UV curing is used in only a small portion of the industrial printing, painting and coating markets, the ease of use of UV LED systems should increase the use of UV curing technology. Even a small penetration of the significant number of industrial applications still using oven curing and drying will lead to significant reductions in energy consumption and reductions in the emission of green house gases and solvent emissions.

  18. Save Money with LED Holiday Light Strings

    Broader source: Energy.gov [DOE]

    LED (or light emitting diode) light strings can use 90% less energy than regular incandescent light strings. They also last about ten times longer, are cooler than incandescents (reducing fire hazards), and are more durable.

  19. SunLed Technologies | Open Energy Information

    Open Energy Info (EERE)

    Product: Hyderabad-based end-to-end energy efficient lighting solution provider and ESCO focused on LEDs and solar power. Coordinates: 17.6726, 77.5971 Show Map Loading...

  20. LEDs Ready for Takeoff at Louisiana Airport

    Broader source: Energy.gov [DOE]

    About 250 lights along the busy taxiway at Hammond Northshore Regional Airport are being replaced with light-emitting diodes (LEDs) with funds from an Energy Efficiency and Conservation Block Grant (EECBG) from the U.S. Department of Energy.

  1. LEDS Toolkit and Framework | Open Energy Information

    Open Energy Info (EERE)

    User Interface: Website, Desktop Application Website: en.openei.orgappsLEDS Cost: Free UN Region: Central Asia, Eastern Asia, South-Eastern Asia, "Pacific" is not in the list...

  2. Text-Alternative Version LED Lighting Forecast

    Office of Energy Efficiency and Renewable Energy (EERE)

    The DOE report Energy Savings Forecast of Solid-State Lighting in General Illumination Applications estimates the energy savings of LED white-light sources over the analysis period of 2013 to 2030....

  3. LED Outdoor Area Lighting Fact Sheet

    SciTech Connect (OSTI)

    2008-06-01

    This fact sheet reviews the major design and specification concerns for outdoor area lighting, and discusses the potential for LED luminaires to save energy while providing high quality lighting for outdoor areas.

  4. LED Roadway Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Roadway Lighting LED Roadway Lighting PDF icon I-35 Bridge Report, Phase II PDF icon I-35 Bridge Report, Phase II Brief PDF icon I-35 Bridge Report, Phase I More Documents & ...

  5. LED Holiday Lights: Festive, Safe, and Efficient!

    Broader source: Energy.gov [DOE]

    Ed. Note cross posted from the Energy Savers Blog. LED light strings may cost a little more up front, but they'll save money in the long run and probably last longer too.

  6. DOE Hosts LED Industry Standards Workshop

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy hosted an LED Industry Standards Workshop on March 1, 2006 in Washington, D.C. The Workshop provided a forum to encourage greater cooperation and coordination among...

  7. Testimonials - Partnerships in LED Lighting - Philips Lumileds

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lighting, LLC | Department of Energy LED Lighting - Philips Lumileds Lighting, LLC Testimonials - Partnerships in LED Lighting - Philips Lumileds Lighting, LLC Addthis Text Version The words "Office of Energy Efficiency & Renewable Energy, U.S. Department of Energy, EERE Partnership Testimonials," appear on the screen, followed by "Sunil Thomas, General Manager of San Jose Manufacturing Site, Philips Lumileds Lighting, LLC" and footage of a man sitting in a showcase

  8. Text-Alternative Version: Evaluating LED Street Lighting Solutions...

    Energy Savers [EERE]

    Evaluating LED Street Lighting Solutions Text-Alternative Version: Evaluating LED Street Lighting Solutions Below is the text-alternative version of the Evaluating LED Street ...

  9. Report 23: Photometric Testing of White Tunable LED Luminaires...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Report 23: Photometric Testing of White Tunable LED Luminaires Report 23: Photometric Testing of White Tunable LED Luminaires PDF icon caliper23white-tunable-led-luminaires.pdf ...

  10. SPECIFYING LED COLOR-TUNABLE PRODUCTS | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SPECIFYING LED COLOR-TUNABLE PRODUCTS SPECIFYING LED COLOR-TUNABLE PRODUCTS Specifying LED color-tunable luminaires is dependent on being able to make accurate comparisons between ...

  11. UNDERSTANDING LED COLOR-TUNABLE PRODUCTS | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    UNDERSTANDING LED COLOR-TUNABLE PRODUCTS UNDERSTANDING LED COLOR-TUNABLE PRODUCTS LED luminaires with the ability to deliver varying light color have been on the architectural ...

  12. LED Product Development and Manufacturing R&D Roundtable Summary...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LED Product Development and Manufacturing R&D Roundtable Summary LED Product Development and Manufacturing R&D Roundtable Summary PDF icon LED Product Dev and Mfg Roundtable ...

  13. Report 23: Photometric Testing of White Tunable LED Luminaires...

    Energy Savers [EERE]

    3: Photometric Testing of White Tunable LED Luminaires Report 23: Photometric Testing of White Tunable LED Luminaires PDF icon caliper23white-tunable-led-luminaires.pdf More ...

  14. Method for nonlinear optimization for gas tagging and other systems

    DOE Patents [OSTI]

    Chen, T.; Gross, K.C.; Wegerich, S.

    1998-01-06

    A method and system are disclosed for providing nuclear fuel rods with a configuration of isotopic gas tags. The method includes selecting a true location of a first gas tag node, selecting initial locations for the remaining n-1 nodes using target gas tag compositions, generating a set of random gene pools with L nodes, applying a Hopfield network for computing on energy, or cost, for each of the L gene pools and using selected constraints to establish minimum energy states to identify optimal gas tag nodes with each energy compared to a convergence threshold and then upon identifying the gas tag node continuing this procedure until establishing the next gas tag node until all remaining n nodes have been established. 6 figs.

  15. Method for nonlinear optimization for gas tagging and other systems

    DOE Patents [OSTI]

    Chen, Ting; Gross, Kenny C.; Wegerich, Stephan

    1998-01-01

    A method and system for providing nuclear fuel rods with a configuration of isotopic gas tags. The method includes selecting a true location of a first gas tag node, selecting initial locations for the remaining n-1 nodes using target gas tag compositions, generating a set of random gene pools with L nodes, applying a Hopfield network for computing on energy, or cost, for each of the L gene pools and using selected constraints to establish minimum energy states to identify optimal gas tag nodes with each energy compared to a convergence threshold and then upon identifying the gas tag node continuing this procedure until establishing the next gas tag node until all remaining n nodes have been established.

  16. Getting Ready for LEDs: LED Lighting Video Series Explains the Basics |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Getting Ready for LEDs: LED Lighting Video Series Explains the Basics Getting Ready for LEDs: LED Lighting Video Series Explains the Basics November 26, 2012 - 3:09pm Addthis Part 1 of the ElectricTV.net video series. Part 2 of the ElectricTV.net video series. Roland Risser Roland Risser Deputy Assistant Secretary for Renewable Power (Acting) How can I participate? Learn more about the advantages and accessiblity of LED lighting from this series of videos. If you haven't

  17. Information Technology Advisory Group (iTAG) | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Committees Information Technology Advisory Group (iTAG) The Information Technology Advisory Group (iTAG) is a standing Ames Laboratory committee consisting of Ames Lab scientists and IT professionals working together to look at and advise the computing needs for researchers. iTAG Charter The committee consists of: Diane Den Adel (Information Services Representative) Terry Herrman (Engineering Services Group Representative) Linlin Wang (Science and Technology Representative) Cynthia Jenks

  18. LEDS GP Success Story: Fostering Coordinated LEDS Support in Kenya (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-03-01

    The LEDS Global Partnership (LEDS GP) strives to advance climate-resilient, low-emission development through catalyzing collaboration, information exchange, and action on the ground. The Government of Kenya is a key LEDS GP member and offers an inspiring example of how LEDS GP is having an impact globally. The 2012 LEDS Collaboration in Action workshop in London provided an interactive space for members to share experiences on cross-ministerial LEDS leadership and to learn about concrete development impacts of LEDS around the world. Inspired by these stories, the Kenya's Ministry of State for Planning, National Development and Vision 2030 (MPND) began to collaborate closely with the Ministry of Environment and Mineral Resources to create strong links between climate change action and development in the country, culminating in the integration of Kenya's National Climate Change Action Plan and the country's Medium Term Development Plan.

  19. Gift tag drive benefits local children and seniors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dec. 2015-Jan. 2016 all issues All Issues submit Gift tag drive benefits local children and seniors Each year, Lab employees and contractors work to make the holidays...

  20. It's 2015: Should All Your Sockets be Filled with LEDs?

    Energy Savers [EERE]

    - mid-power LEDs on PCb used in 2x4 troffers 4 LED Modules and Light Engines GE Infusion Philips Fortimo Osram PrevaLED 5 LEDs: A New Light Source for Everything * Outdoor...

  1. Pittsburgh LED Street Lighting Research Project Performance Criteria

    Broader source: Energy.gov [DOE]

    A Pittsburgh LED Street Lighting Research Project document on Technical and Aesthetic Performance for Business District LED Lighting.

  2. Memorandum of Decision: Withdrawal of LED Lighting Waiver | Department...

    Office of Environmental Management (EM)

    LED Lighting Waiver Memorandum of Decision: Withdrawal of LED Lighting Waiver novemberdecisionwithdraw More Documents & Publications Nationwide Nonavailability Waiver: November...

  3. LED Color-Tunable Products | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research & Development » Technology Application R&D » CALiPER Testing » Application Reports » LED Color-Tunable Products LED Color-Tunable Products UNDERSTANDING, LED Color-Tunable Products SPECIFYING, LED Color-Tunable Products CONTROLLING, LED Color-Tunable Products TESTING, LED Color-Tunable Products Color-tunable LED luminaires are a nascent and growing product category. Beyond the inherent energy efficiency of LEDs, these luminaires offer other potential benefits including

  4. Improved gas tagging and cover gas combination for nuclear reactor

    DOE Patents [OSTI]

    Gross, K.C.; Laug, M.T.

    1983-09-26

    The invention discloses the use of stable isotopes of neon and argon, sealed as tags in different cladding nuclear fuel elements to be used in a liquid metal fast breeder reactor. Cladding failure allows fission gases and these tag isotopes to escape and to combine with the cover gas. The isotopes are Ne/sup 20/, Ne/sup 21/ and Ne/sup 22/ and Ar/sup 36/, Ar/sup 38/ and Ar/sup 40/, and the cover gas is He. Serially connected cryogenically operated charcoal beds are used to clean the cover gas and to separate out the tags. The first or cover gas cleanup bed is held between 0 and -25/sup 0/C to remove the fission gases from the cover gas and tags, and the second or tag recovery system bed between -170 and -185/sup 0/C to isolate the tags from the cover gas. Spectrometric analysis is used to identify the specific tags that are recovered, and thus the specific leaking fuel element. By cataloging the fuel element tags to the location of the fuel elements in the reactor, the location of the leaking fuel element can then be determined.

  5. Gas tagging and cover gas combination for nuclear reactor

    DOE Patents [OSTI]

    Gross, Kenny C.; Laug, Matthew T.

    1985-01-01

    The invention discloses the use of stable isotopes of neon and argon, that are grouped in preselected different ratios one to the other and are then sealed as tags in different cladded nuclear fuel elements to be used in a liquid metal fast breeder reactor. Failure of the cladding of any fuel element allows fission gases generated in the reaction and these tag isotopes to escape and to combine with the cover gas held in the reactor over the fuel elements. The isotopes specifically are Ne.sup.20, Ne.sup.21 and Ne.sup.22 of neon and Ar.sup.36, Ar.sup.38 and Ar.sup.40 of argon, and the cover gas is helium. Serially connected cryogenically operated charcoal beds are used to clean the cover gas and to separate out the tags. The first or cover gas cleanup bed is held between approximately 0.degree. and -25.degree. C. operable to remove the fission gases from the cover gas and tags and the second or tag recovery system bed is held between approximately -170.degree. and -185.degree. C. operable to isolate the tags from the cover gas. Spectrometric analysis further is used to identify the specific tags that are recovered, and thus the specific leaking fuel element. By cataloging the fuel element tags to the location of the fuel elements in the reactor, the location of the leaking fuel element can then be specifically determined.

  6. LED Lighting in a Performing Arts Building

    SciTech Connect (OSTI)

    Miller, N. J.; Kaye, S. M.; Coleman, P. M.; Wilkerson, A. M.; Perrin, T. E.; Sullivan, G. P.

    2014-07-31

    At the University of Florida in Gainesville, the DOE Solid-State Lighting GATEWAY program evaluated LED architectural and theatrical lighting in four academic/performance-related spaces within the Nadine McGuire Theatre + Dance Pavilion. Due to a wise choice of products and luminaire light distributions, the change brought significant quality improvements including improved controllability and color.

  7. LED structure with enhanced mirror reflectivity

    DOE Patents [OSTI]

    Bergmann, Michael; Donofrio, Matthew; Heikman, Sten; Schneider, Kevin S; Haberern, Kevin W; Edmond, John A

    2014-04-01

    Embodiments of the present invention are generally related to LED chips having improved overall emission by reducing the light-absorbing effects of barrier layers adjacent mirror contacts. In one embodiment, a LED chip comprises one or more LEDs, with each LED having an active region, a first contact under the active region having a highly reflective mirror, and a barrier layer adjacent the mirror. The barrier layer is smaller than the mirror such that it does not extend beyond the periphery of the mirror. In another possible embodiment, an insulator is further provided, with the insulator adjacent the barrier layer and adjacent portions of the mirror not contacted by the active region or by the barrier layer. In yet another embodiment, a second contact is provided on the active region. In a further embodiment, the barrier layer is smaller than the mirror such that the periphery of the mirror is at least 40% free of the barrier layer, and the second contact is below the first contact and accessible from the bottom of the chip.

  8. Low-Cost Illumination-Grade LEDs

    SciTech Connect (OSTI)

    Epler, John

    2013-08-31

    Solid State Lighting is a cost-effective, energy-conserving technology serving a rapidly expand- ing multi-billion dollar market. This program was designed to accelerate this lighting revolution by reducing the manufacturing cost of Illumination-Grade LEDs. The technical strategy was to investigate growth substrate alternatives to standard planar sapphire, select the most effective and compatible option, and demonstrate a significant increase in Lumen/$ with a marketable LED. The most obvious alternate substrate, silicon, was extensively studied in the first two years of the program. The superior thermal and mechanical properties of Si were expected to improve wavelength uniformity and hence color yield in the manufacture of high-power illumination- grade LEDs. However, improvements in efficiency and epitaxy uniformity on standard c-plane sapphire diminished the advantages of switching to Si. Furthermore, the cost of sapphire decreased significantly and the cost of processing Si devices using our thin film process was higher than expected. We concluded that GaN on Si was a viable technology but not a practical option for Philips Lumileds. Therefore in 2012 and 2013, we sought and received amendments which broadened the scope to include other substrates and extended the time of execution. Proprietary engineered substrates, off-axis (non-c-plane) sapphire, and c-plane patterned sapphire substrates (PSS) were all investigated in the final 18 months of this program. Excellent epitaxy quality was achieved on all three candidates; however we eliminated engineered substrates and non-c-plane sapphire because of their higher combined cost of substrate, device fabrication and packaging. Ultimately, by fabricating a flip-chip (FC) LED based upon c-plane PSS we attained a 42% reduction in LED manufacturing cost relative to our LUXEON Rebel product (Q1-2012). Combined with a flux gain from 85 to 102 Lm, the LUXEON Q delivered a 210% increase in Lm/$ over this time period. The

  9. Sustainable LED Fluorescent Light Replacement Technology

    SciTech Connect (OSTI)

    2011-06-30

    Ilumisys and the National Center for Manufacturing Sciences (NCMS) partnered on a three-year project awarded by the United States (U.S.) Department of Energy (DOE), to quantify the impacts of LED lamps, incandescent lamps and fluorescent benchmark lamps over a product lifecycle – i.e. to develop a sustainable design and manufacturing strategy that addresses product manufacturing, use, recycling and disposal scenarios for LED-based lighting. Based on the knowledge gained from extensive product tear-down studies of fluorescent and screw-in lighting products, lifecycle assessment tools, and accelerated lifecycle testing protocols, an interactive Sustainable LED Design Guide has been developed to aid architectural and lighting designers and engineers in making design decisions that consider three important environmental impacts (greenhouse gas emissions, energy use and mercury emission) across all phases of the life of an LED lighting product. Critical information developed for the lifecycle analysis and product feature comparisons is the useful life of the lighting product as well as its performance. The Design Guide is available at www.ncms.org, and was developed based on operational and durability testing of a variety of lighting products including power consumption, light output, and useful life of a lamp in order to allow a more realistic comparison of lamp designs. This report describes the main project tasks, results and innovative features of the lifecycle assessment (LCA)-based design tools, and the key considerations driving the sustainable design of LED lighting systems. The Design Guide incorporates the following three novel features for efficiently evaluating LED lighting features in value-chains: • Bill-of-Materials (BOM) Builder – Designers may import process data for each component and supply functional data for the product, including power, consumption, lumen output and expected useful life. • Environmental Impact Review – Designs are

  10. Online b-jets tagging at CDF

    SciTech Connect (OSTI)

    Casarsa, M.; Ristori, L.; Amerio, S.; Lucchesi, D.; Pagan Griso, S.; Torre, S.T.; Cortiana, G.; /Padua U., Astron. Dept.

    2007-04-01

    We propose a method to identify b-quark jets at trigger level which exploits recently increased CDF trigger system capabilities. b-quark jets identification is of central interest for the CDF high-P{sub T} physics program, and the possibility to select online b-jets enriched samples can extend the physics reaches especially for light Higgs boson searches where the H {yields} b{bar b} decay mode is dominant. Exploiting new trigger primitives provided by two recent trigger upgrades, the Level2 XFT stereo tracking and the improved Level2 cluster-finder, in conjunction with the existing Silicon Vertex Tracker (SVT), we design an online trigger algorithm aimed at selecting good purity b-jets samples useful for many physics measurements, the most important being inclusive H {yields} b{bar b} searches. We discuss the performances of the proposed b-tagging algorithm which must guarantee reasonable trigger rates at luminosity greater than 2 x 10{sup 32} cm{sup -2}s{sup -1} and provide high efficiency on H {yields} b{bar b} events.

  11. TAGGING, TRACKING AND LOCATING WITHOUT GPS

    SciTech Connect (OSTI)

    Cordaro, J.; Coleman, T.; Shull, D.

    2012-07-08

    The Savannah River National Laboratory (SRNL) was requested to lead a Law Enforcement Working Group that was formed to collaborate on common operational needs. All agencies represented on the working group ranked their need to tag, track, and locate a witting or unwitting target as their highest priority. Specifically, they were looking for technologies more robust than Global Positioning Satellite (GPS), could communicate back to the owner, and worked where normal cell phone communications did not work or were unreliable. SRNL brought together multiple technologies in a demonstration that was held in in various Alaska venues, including metropolitan, wilderness, and at-sea that met the working group's requirements. Using prototypical technologies from Boeing, On Ramp, and Fortress, SRNL was able to demonstrate the ability to track personnel and material in all scenarios including indoors, in heavily wooden areas, canyons, and in parking garages. In all cases GPS signals were too weak to measure. Bi-directional communication was achieved in areas that Wi-Fi, cell towers, or traditional radios would not perform. The results of the exercise will be presented. These technologies are considered ideal for tracking high value material such has nuclear material with a platform that allows seamless tracking anywhere in the world, indoors or outdoors.

  12. Challenges in LED Research and Development | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LED Research and Development Challenges in LED Research and Development View the video about LED lighting technology, where it is headed, and the DOE's role in its continued R&D

  13. LED R&D Challenges | Department of Energy

    Energy Savers [EERE]

    Understanding SSL » LED Basics LED Basics Unlike incandescent lamps, LEDs are not inherently white light sources. Instead, LEDs emit nearly monochromatic light, making them highly efficient for colored light applications such as traffic lights and exit signs. However, to be used as a general light source, white light is needed. White light can be achieved with LEDs in three ways: Phosphor conversion, in which a phosphor is used on or near the LED to convert the colored light to white light RGB

  14. A Statistical Method Analyzing LED Lumen Depreciation and Projecting LED Life

    SciTech Connect (OSTI)

    Qiao, Hong; Pulsipher, Trenton C.; Hathaway, John E.; Richman, Eric E.; Radkov, Emil

    2010-05-30

    There is a strong need for a method to represent the potential life of LED products as a critical part of design decisions including cost-effectiveness analysis. The IES LM-80 test method is in place to collect lumen depreciation data but it does not provide for estimation of future long term depreciation. Separate estimation methods are being considered (TM-21) and this paper describes the analysis of a series of LED degradation models and subsequent development of an estimation method. The work involves analysis of a set of engineering models to determine their applicability and define a structure for their use in LED lumen output life based on a lumen output level such as the L70 metric. The analysis has provided valuable information on methods effectively estimating LED life time, and impacts of measurement uncertainties, test duration, interval and other test conditions on selecting degradation models and LED life time projection. A set of guidelines are recommended to estimate LED life from data obtained using the current LM-80 test method.

  15. Which LED Lighting Products Would You Consider Trying?

    Broader source: Energy.gov [DOE]

    Which LED lighting products would you consider trying? Or, if you're already using LEDs, what do you think of them?

  16. CONTROLLING LED COLOR-TUNABLE PRODUCTS | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CONTROLLING LED COLOR-TUNABLE PRODUCTS CONTROLLING LED COLOR-TUNABLE PRODUCTS photo of a conference room. Controlling color-tunable luminaires can be challenging for specifiers,...

  17. LEDS Collaboration in Action Workshop Attendee List | Open Energy...

    Open Energy Info (EERE)

    LEDS Collaboration in Action Workshop Attendee List (Redirected from LEDS Collaboration in Action Workshop Participating Countries) Jump to: navigation, search Low Emission...

  18. Text-Alternative Version: MSSLC Member Case Studies - LED Street...

    Energy Savers [EERE]

    MSSLC Member Case Studies - LED Street Lighting Programs Webinar Text-Alternative Version: MSSLC Member Case Studies - LED Street Lighting Programs Webinar Below is the ...

  19. Guanquan Shandong Photoelectric Technology aka United LED Corporation...

    Open Energy Info (EERE)

    Guanquan Shandong Photoelectric Technology aka United LED Corporation Jump to: navigation, search Name: Guanquan (Shandong) Photoelectric Technology (aka United LED Corporation)...

  20. Text-Alternative Version: Dimming LEDs Webcast | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Well as many people know LED dimming delivers many other value propositions to LED ... and this is particularly relevant for people who are experienced dimming light sources ...

  1. LEDs Go Ivy League: Princeton's Dillon Gymnasium | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    View the video about LED lighting in Dillon Gymnasium, a focal point of sports and recreation at Princeton since 1947. William Evans discusses measurable benefits of LED lighting ...

  2. Solid State Lighting LED Core Technology R&D Roundtable

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The document should be referenced as: DOE SSL Program, "Solid State Lighting LED Core Technology R&D Roundtable," November 2015. Authors Monica Hansen LED Lighting Advisors Nnamnor ...

  3. Demonstration of LED Street Lighting in Kansas City, MO Kinzey...

    Office of Scientific and Technical Information (OSTI)

    Street Lighting in Kansas City, MO Kinzey, Bruce R.; Royer, Michael P.; Hadjian, M.; Kauffman, Rick LED streetlighting; field illuminance measurement LED streetlighting; field...

  4. Demonstration Assessment of Light Emitting Diode (LED) Street...

    Broader source: Energy.gov (indexed) [DOE]

    This report summarizes an LED street lighting assessment project conducted to study the applicability of LED luminaires in a street lighting application. emergingtechreportleds...

  5. Demonstration Assessment of Light-Emitting Diode (LED) Freezer...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Demonstration Assessment of Light-Emitting Diode (LED) Freezer Case Lighting Demonstration Assessment of Light-Emitting Diode (LED) Freezer Case Lighting This document is a report ...

  6. White LED with High Package Extraction Efficiency (Technical...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: White LED with High Package Extraction Efficiency Citation Details In-Document Search Title: White LED with High Package Extraction Efficiency The goal of this ...

  7. Demonstration of LED Street Lighting in Kansas City, MO (Technical...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Demonstration of LED Street Lighting in Kansas City, MO Citation Details In-Document Search Title: Demonstration of LED Street Lighting in Kansas City, MO Nine ...

  8. Exterior LED Lighting Projects at Princeton University | Department...

    Energy Savers [EERE]

    Exterior LED Lighting Projects at Princeton University Exterior LED Lighting Projects at Princeton University 2015gatewayprinceton-exterior.pdf gatewayprinceton-exteriorbrief.p...

  9. Technical Feasibility Assessment of LED Roadway Lighting on the...

    Office of Scientific and Technical Information (OSTI)

    Technical Feasibility Assessment of LED Roadway Lighting on the Golden Gate Bridge Tuenge, Jason R. LED; induction; ceramic metal halide; plasma; roadway lighting; Golden Gate...

  10. (Expired) Nationwide Limited Public Interest Waiver for LED Lighting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (Expired) Nationwide Limited Public Interest Waiver for LED Lighting and HVAC Units: February 11, 2010 (Expired) Nationwide Limited Public Interest Waiver for LED Lighting and HVAC ...

  11. LED Efficacy: What America Stands to Gain | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Efficacy: What America Stands to Gain LED Efficacy: What America Stands to Gain LED Efficacy-What America Stands to Gain_ November 2015.pdf (280.37 KB)

  12. Methyl-CpG island-associated genome signature tags

    DOE Patents [OSTI]

    Dunn, John J

    2014-05-20

    Disclosed is a method for analyzing the organismic complexity of a sample through analysis of the nucleic acid in the sample. In the disclosed method, through a series of steps, including digestion with a type II restriction enzyme, ligation of capture adapters and linkers and digestion with a type IIS restriction enzyme, genome signature tags are produced. The sequences of a statistically significant number of the signature tags are determined and the sequences are used to identify and quantify the organisms in the sample. Various embodiments of the invention described herein include methods for using single point genome signature tags to analyze the related families present in a sample, methods for analyzing sequences associated with hyper- and hypo-methylated CpG islands, methods for visualizing organismic complexity change in a sampling location over time and methods for generating the genome signature tag profile of a sample of fragmented DNA.

  13. Conference Poster and Name Tag Templates | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Publications, Exhibits, & Logos » Templates » Conference Poster and Name Tag Templates Conference Poster and Name Tag Templates The Office of Energy Efficiency and Renewable Energy (EERE) has developed templates for posters and nametags for use at conferences. They were designed to provide EERE staff and contractors with basic templates for conference materials with a unified EERE look and feel. The templates are InDesign files. Poster Illustration of the blue conference poster template

  14. Text-Alternative Version: LED Essentials- Technology, Applications, Advantages, Disadvantages

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the LED Essentials - Technology, Applications, Advantages, Disadvantages webcast.

  15. New and Underutilized Technology: High Bay LED Lighting

    Broader source: Energy.gov [DOE]

    The following information outlines key deployment considerations for high bay LED lighting within the Federal sector.

  16. Switched-capacitor isolated LED driver

    DOE Patents [OSTI]

    Sanders, Seth R.; Kline, Mitchell

    2016-03-22

    A switched-capacitor voltage converter which is particularly well-suited for receiving a line voltage from which to drive current through a series of light emitting diodes (LEDs). Input voltage is rectified in a multi-level rectifier network having switched capacitors in an ascending-bank configuration for passing voltages in uniform steps between zero volts up to full received voltage V.sub.DC. A regulator section, operating on V.sub.DC, comprises switched-capacitor stages of H-bridge switching and flying capacitors. A current controlled oscillator drives the states of the switched-capacitor stages and changes its frequency to maintain a constant current to the load. Embodiments are described for isolating the load from the mains, utilizing an LC tank circuit or a multi-primary-winding transformer.

  17. DOE ZERH Webinar: LED Lighting Efficiency | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LED Lighting Efficiency DOE ZERH Webinar: LED Lighting Efficiency Description: LED lighting offers efficiency and performance benefits we've never seen in traditional lighting technologies. Commercial buildings have seen rapid growth in LED deployment, and in the residential arena leading builders are now integrating LED lighting packages. And as with any new building system, there are integration challenges along with the process of consumer understanding and acceptance. This webinar will

  18. LED R&D Projects | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LED R&D Projects LED R&D Projects DOE-funded LED R&D projects tackle the science and technology challenges that stand in the way of achieving SSL Program targets for LED efficacy, performance, and cost. All project selections align with the priorities and targets detailed in the SSL R&D Plan, updated annually with industry input. Learn more about R&D challenges to accelerate LED technology advances. View details about the current LED R&D projects below. Alternative

  19. Demonstration Assessment of Light-Emitting Diode (LED) Roadway...

    Office of Scientific and Technical Information (OSTI)

    The LEDs had an average illuminance level of 0.91 foot candles compared to 1.29 fc for the HPS lamps. The LED luminairesmore cost 38,000 more than HPS lamps, yielding a lengthy ...

  20. File:(131112) Presentacion LAC LEDs.pdf | Open Energy Information

    Open Energy Info (EERE)

    (131112) Presentacion LAC LEDs.pdf Jump to: navigation, search File File history File usage File:(131112) Presentacion LAC LEDs.pdf Size of this preview: 800 600 pixels. Go to...

  1. Color Maintenance of LEDs in Laboratory and Field Applications

    SciTech Connect (OSTI)

    Royer, Michael; Tuttle, Ralph; Rosenfeld, Scott; Miller, Naomi

    2013-09-30

    GATEWAY program report on color shift data of LED lamps used in real-world applications as well as LED products monitored by the CALiPER program in a lab environment.

  2. Text-Alternative Version: Challenges in LED Research and Development

    Broader source: Energy.gov [DOE]

    Narrator: LEDs have made remarkable progress in the past decade and gained a strong foothold in the US marketplace. In 2012, LED lighting saved an estimated 71 trillion BTUs, equivalent to annual...

  3. Consortium Led by University of California, Berkeley Awarded...

    National Nuclear Security Administration (NNSA)

    Consortium Led by University of California, Berkeley Awarded 25M NNSA Grant for Nuclear ... award of 25 million to a University of California, Berkeley-led consortium of eight ...

  4. TESTING LED COLOR-TUNABLE PRODUCTS | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TESTING LED COLOR-TUNABLE PRODUCTS TESTING LED COLOR-TUNABLE PRODUCTS Cover of CALiPER Report 23. New product capabilities and performance variables require new test methods to be ...

  5. Team Led by Argonne National Lab Selected as DOE's Batteries...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Team Led by Argonne National Lab Selected as DOE's Batteries and Energy Storage Hub On ... to announce that a multi-partner team led by Argonne National Laboratory has been ...

  6. Reducing LED Costs Through Innovation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reducing LED Costs Through Innovation Reducing LED Costs Through Innovation November 19, 2013 - 3:49pm Addthis A combination solid-state laser turret cutter and stamping machine ...

  7. DOE-Led Research Team Makes Significant Rare Earth Discovery...

    Office of Environmental Management (EM)

    DOE-Led Research Team Makes Significant Rare Earth Discovery DOE-Led Research Team Makes ... Energy (DOE) has found that rare earth elements (REEs) can be removed from two U.S. ...

  8. LED Traffic Lights Get Buy American Stamp | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Red. Yellow. Green. What LED traffic signals don't say: Made in USA. That is changing. ... Lindsey Gsell is a Staff Writer for Energy Empowers. Addthis Related Articles LED traffic ...

  9. LEDs Go Ivy League: Princeton’s Dillon Gymnasium

    Office of Energy Efficiency and Renewable Energy (EERE)

    View the video about LED lighting in Dillon Gymnasium, a focal point of sports and recreation at Princeton since 1947. William Evans discusses measurable benefits of LED lighting in the gym and...

  10. CALiPER Application Summary Report 19. LED Linear Pendants

    SciTech Connect (OSTI)

    none,

    2012-10-01

    Report 19 reviews the independently tested performance of nine LED linear pendants and also evaluates a collection of 11 linear pendant products available in both an LED and fluorescent version.

  11. Model Specification for LED Roadway Luminaires, V2.0

    Broader source: Energy.gov [DOE]

    Version 2.0 of the Model Specification for LED Roadway Luminaires is now available. Changes are substantial and include streamlined structure and formatting, new diagrams, updated references, and leveraging of LED Lighting Facts® program guidance.

  12. To Bridge LEDs' Green Gap, Scientists Think Small

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... This "direct" method isn't practical today because green LEDs are not as efficient as their blue and red counterparts. Instead, most white lighting today comes from blue LED light ...

  13. DOE Publishes GATEWAY Report on LED Lighting in a Performing...

    Energy Savers [EERE]

    LED Lighting in a Performing Arts Setting DOE Publishes GATEWAY Report on LED Lighting in a Performing Arts Setting August 6, 2014 - 2:46pm Addthis The U.S. Department of Energy ...

  14. REA Refrigerated Display Case LED Lighting Performance Specification |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy REA Refrigerated Display Case LED Lighting Performance Specification REA Refrigerated Display Case LED Lighting Performance Specification A Retailer Energy Alliances (REA) Project rea_refrig_display_spec.pdf (300.24 KB) More Documents & Publications CBEA LED Site Lighting Specification - Version 1.3, Released 2/15/2012 Model Specification for LED Roadway Luminaires, V2.0 CBEA High-Efficiency Parking Structure Lighting Specification

  15. List of LED Exit Signs Incentives | Open Energy Information

    Open Energy Info (EERE)

    upgrades Water Heaters Whole House Fans LED Exit Signs CHPCogeneration Biomass Photovoltaics Yes Energy Optimization (Electric) - Commercial Efficiency Program...

  16. Study: Environmental Benefits of LEDs Greater Than CFLs | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Study: Environmental Benefits of LEDs Greater Than CFLs Study: Environmental Benefits of LEDs Greater Than CFLs December 9, 2013 - 4:13pm Addthis A three-part Energy Department-funded study indicates LEDs are more environmentally friendly than compact fluorescent and incandescent lights. | Energy Department graphic A three-part Energy Department-funded study indicates LEDs are more environmentally friendly than compact fluorescent and incandescent lights. | Energy Department graphic

  17. Supercomputers Help Identify Efficiency-Limiting Defects in LEDs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Supercomputers Help Identify Efficiency-Limiting Defects in LEDs Supercomputers Help Identify Efficiency-Limiting Defects in LEDs July 18, 2016 Contact: Kathy Kincade, kkincade@lbl.gov, +1 510 495 2124 ChrisVanDerWalle PressReleaseImage A conceptual illustration of how defects in a crystal lattice might contribute to nonradiative recombination of electrons and holes in LEDs. Image: Peter Allen Light-emitting diodes (LEDs) have found firm footing in the lighting industry, not just for blue and

  18. Demonstration of Light-Emitting Diode (LED) Retrofit Lamps

    SciTech Connect (OSTI)

    Miller, N.

    2011-09-01

    GATEWAY program report on a demonstration of LED retrofit lamps at the Jordan Schnitzer Museum of art in Eugene, OR

  19. LED T8 Replacement Lamps | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    T8 Replacement Lamps LED T8 Replacement Lamps This documents provides an overview of LED T8 replacement lamps and helps define a reasonable minimum performance level for the purpose of plant-wide improvement. LED T8 Replacement Lamps (April 2010) (809.84 KB) More Documents & Publications Emerging Lighting Technology General Service LED Lamps Guiding Market Introduction of High-Performance SSL Products

  20. LED Parking Lot Lighting Working Group Fact Sheet

    SciTech Connect (OSTI)

    2008-10-01

    This fact sheet describes the Retailer Energy Alliance LED Parking Lot Lighting Working Group and its Technology Procurement Project.

  1. Considerations When Comparing LED and Conventional Lighting | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Using LEDs » Considerations When Comparing LED and Conventional Lighting Considerations When Comparing LED and Conventional Lighting When comparing LED lighting performance to conventional lighting, buyers will want to consider energy efficiency, operating life and lumen depreciation, light output/distribution, color quality, color shift, dimmability, and expected lifetime. Energy efficiency The final energy efficiency of any lighting system depends on more than the efficacy of the

  2. CALiPER Snapshot Report: Indoor LED Luminaires

    SciTech Connect (OSTI)

    2014-04-01

    Snapshot reports use data from DOE's LED Lighting Facts product list to compare the LED performance to standard technologies, and are designed to help lighting retailers, distributors, designers, utilities, energy efficiency program sponsors, and other stakeholders understand the current state of the LED market and its trajectory.

  3. DOE Publishes Report on Color Stability of LED Lighting Products

    Broader source: Energy.gov [DOE]

    DOE has published a new GATEWAY report on color maintenance of LEDs in laboratory and field applications, summarizing color shift data of LED lamps used in real-world applications as well as LED products monitored by the CALiPER program in a lab

  4. LED Luminaire Lifetime: Recommendations For Testing and Reporting |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Luminaire Lifetime: Recommendations For Testing and Reporting LED Luminaire Lifetime: Recommendations For Testing and Reporting LED Luminaire Lifetime: September 2014 (774.47 KB) More Documents & Publications System Reliability Model for Solid-State Lighting Luminaires LED LUMINAIRE LIFETIME: Recommendations for Testing and Reporting Lifetime and Reliability

  5. To Bridge LEDs' Green Gap, Scientists Think Small

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    To Bridge LEDs' Green Gap, Scientists Think Small To Bridge LEDs' Green Gap, Scientists Think Small Nanostructures Half a DNA Strand-Wide Show Promise for Efficient LEDs April 4, 2014 Contact: Margie Wylie, mwylie@lbl.gov, +1 510 486 7421 Nanostructures half the breadth of a DNA strand could improve the efficiency of light emitting diodes (LEDs), especially in the "green gap," a portion of the spectrum where LED efficiency plunges, simulations at the U.S. Department of Energy's

  6. Cree Sets New Benchmarks for LED Efficacy and Brightness

    Broader source: Energy.gov [DOE]

    Cree has successfully created a cool white LED prototype that delivers 107 lm/W at 350mA. This achievement builds on the Cree EZBright® LED chip platform, developed in part with prior funding support from DOE. Cree made the prototype LED under their DOE project focused on developing LED chips incorporating photonic crystal elements for improved light extraction and novel package technology for higher down-conversion efficiency compared to conventional LEDs. Based on a 1 millimeter-square chip, the new prototype LED produces white light with a CCT of 5500K and a CRI of 73. Integration of four of these prototype LEDs can produce luminous flux of more than 450 lumens.

  7. Title Tags for Websites Outside of the Energy.gov Drupal Environment

    Broader source: Energy.gov [DOE]

    These standards are required when coding title tags on websites and applications outside the Energy.gov Drupal environment.

  8. Design and Analysis of Salmonid Tagging Studies in the Columbia Basin, Volume XVI; Alternative Designs for Future Adult PIT-Tag Detection Studies, 2000 Technical Report.

    SciTech Connect (OSTI)

    Perez-Comas, Jose A.; Skalski, John R.

    2000-09-25

    In the advent of the installation of a PIT-tag interrogation system in the Cascades Island fish ladder at Bonneville Dam (BON), and other CRB dams, this overview describes in general terms what can and cannot be estimated under seven different scenarios of adult PIT-tag detection capabilities in the CRB. Moreover, this overview attempted to identify minimal adult PIT-tag detection configurations required by the ten threatened Columbia River Basin (CRB) chinook and steelhead ESUs. A minimal adult PIT-tag detection configuration will require the installation of adult PIT-tag detection facilities at Bonneville Dam and another dam above BON. Thus, the Snake River spring/summer and fall chinook salmon, and the Snake River steelhead will require a minimum of three dams with adult PIT-tag detection capabilities to guarantee estimates of ''ocean survival'' and at least of one independent, in-river returning adult survival (e.g., adult PIT-tag detection facilities at BON and LGR dams and at any other intermediary dam such as IHR). The Upper Columbia River spring chinook salmon and steelhead will also require a minimum of three dams with adult PIT-tag detection capabilities: BON and two other dams on the BON-WEL reach. The current CRB dam system configuration and BPA's and COE's commitment to install adult PIT-tag detectors only in major CRB projects will not allow the estimation of an ''ocean survival'' and of any in-river adult survival for the Lower Columbia River chinook salmon and steelhead. The Middle Columbia River steelhead ESU will require a minimum of two dams with adult PIT-tag detection capabilities: BON and another upstream dam on the BON-McN reach. Finally, in spite of their importance in terms of releases, PIT-tag survival studies for the Upper Willamette chinook and Upper Willamette steelhead ESUs cannot be perform with the current CRB dam system configuration and PIT-tag detection capabilities.

  9. Nationwide Limited Public Interest Waiver for LED and HVAC Units |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Limited Public Interest Waiver for LED and HVAC Units Nationwide Limited Public Interest Waiver for LED and HVAC Units eere_nationwide_public_interest_waiver (55.98 KB) More Documents & Publications Nationwide Nonavailability Waiver: February 11, 2010 (Please note, the waiver for LED traffic signals has been withdrawn effective December 1, 2010) Nationwide Nonavailability Waiver: November 5, 2010 Amended Nationwide Nonavailability Waiver: November 5

  10. New DOE Report Estimates LED Savings in Common Lighting Applications |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Report Estimates LED Savings in Common Lighting Applications New DOE Report Estimates LED Savings in Common Lighting Applications July 24, 2015 - 11:00am Addthis The U.S. Department of Energy (DOE) has released its latest report in a series analyzing markets where LEDs compete with traditional lighting sources. The new report, Adoption of Light-Emitting Diodes in Common Lighting Applications, reveals a wealth of insights into promising pathways for SSL technology

  11. Energy Department Announces New Investments in University-Led Nuclear

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Innovation | Department of Energy in University-Led Nuclear Energy Innovation Energy Department Announces New Investments in University-Led Nuclear Energy Innovation September 27, 2012 - 11:07am Addthis WASHINGTON - As part of the Obama Administration's all-of-the-above energy strategy to deploy every available source of American energy and ensure the U.S. remains competitive globally, the Energy Department announced today more than $13 million in new investments for university-led

  12. Purchasing Energy-Efficient Commercial and Industrial LED Luminaires |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Commercial and Industrial LED Luminaires Purchasing Energy-Efficient Commercial and Industrial LED Luminaires The Federal Energy Management Program (FEMP) provides acquisition guidance for commercial and industrial light emitting diode (LED) luminaires, a product category covered by FEMP efficiency requirements. Federal laws and requirements mandate that agencies purchase ENERGY STAR-qualified or FEMP-designated products in all product categories covered by these

  13. Successful Selection of LED Streetlight Luminaires: Optimizing Illumination

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Economic Performance | Department of Energy Webcasts » Successful Selection of LED Streetlight Luminaires: Optimizing Illumination and Economic Performance Successful Selection of LED Streetlight Luminaires: Optimizing Illumination and Economic Performance This March 6, 2013 webcast reviewed the factors involved in successful selection of LED streetlight luminaires. Presenters Eric Haugaard of Cree Lighting and Chad Stalker of Philips Lumileds guided participants through the modeling of

  14. Color Maintenance of LEDs in Laboratory and Field Applications (Technical

    Office of Scientific and Technical Information (OSTI)

    Report) | SciTech Connect Color Maintenance of LEDs in Laboratory and Field Applications Citation Details In-Document Search Title: Color Maintenance of LEDs in Laboratory and Field Applications Synopsis: To date, consideration for parametric failure of LED products has largely been focused on lumen maintenance. However, color shift is a cause of early failure for some products, and is especially important to consider in certain applications, like museums, where visual appearance is

  15. Demonstration Assessment of LED Roadway Lighting: Philadelphia, PA

    Office of Scientific and Technical Information (OSTI)

    (Technical Report) | SciTech Connect Demonstration Assessment of LED Roadway Lighting: Philadelphia, PA Citation Details In-Document Search Title: Demonstration Assessment of LED Roadway Lighting: Philadelphia, PA For this demonstration assessment, 10 different groups of LED luminaires were installed at three sites in Philadelphia, PA. Each of the three sites represented a different set of conditions, most importantly with regard to the incumbent HPS luminaires, which were nominally 100 W,

  16. Low Cost, High Efficiency Tandem Silicon Solar Cells and LEDs...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building Energy Efficiency Building Energy ... Return to Search Low Cost, High Efficiency Tandem Silicon Solar Cells and LEDs ... gaps will lead to efficient power conversion. ...

  17. Adopting LED Technology: What Federal Facility Managers Need to Know

    Broader source: Energy.gov [DOE]

    This document describes the presentation slides for the "Adopting LED Technology: What Federal Facility Managers Need to Know" webinar that took place on September 11, 2014.

  18. Next-Generation LED Package Architectures Enabled by Thermally...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This project will develop next-generation LED package architectures enabled by thermally conductive composite encapsulant materials utilizing boron nitride (BN). Nanoscale boron ...

  19. DOE Publishes GATEWAY Report on Successful LED Wall Washer Retrofit...

    Energy Savers [EERE]

    while retaining the quality of light when LED modules replaced 87 halogen lamps in existing wall washers at the University of Maryland's (UMD) Clarice Smith Performing Arts Center. ...

  20. LEDS Collaboration in Action Workshop Links | Open Energy Information

    Open Energy Info (EERE)

    LEDS Collaboration in Action Workshop Links Jump to: navigation, search Low Emission Development Strategies Global Partnership Advancing climate-resilient, low-emission development...

  1. LEDS Collaboration in Action Workshop Accommodations | Open Energy...

    Open Energy Info (EERE)

    LEDS Collaboration in Action Workshop Accommodations Jump to: navigation, search Low Emission Development Strategies Global Partnership Advancing climate-resilient, low-emission...

  2. LEDS Collaboration in Action Workshop Agenda | Open Energy Information

    Open Energy Info (EERE)

    LEDS Collaboration in Action Workshop Agenda Jump to: navigation, search Low Emission Development Strategies Global Partnership Advancing climate-resilient, low-emission...

  3. LEDS Collaboration in Action Workshop Participant Pack | Open...

    Open Energy Info (EERE)

    LEDS Collaboration in Action Workshop Participant Pack Jump to: navigation, search Low Emission Development Strategies Global Partnership Advancing climate-resilient, low-emission...

  4. Study: Environmental Benefits of LEDs Greater Than CFLs | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to date. The study - which evaluated not only the use but also the manufacturing, transport, and disposal of LED, CFL, and incandescent lamps throughout each product...

  5. New DOE Report Estimates LED Savings in Common Lighting Applications...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    report in a series analyzing markets where LEDs compete with traditional lighting sources. ... applications, as well as the potential energy savings if each of these ...

  6. Solid State Lighting LED Product Development and Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... introduced into the SSL system, protecting LED luminaires ... pump wavelengths and operating conditions, and the ... with the advance of human-robot interactions, natural ...

  7. LED Site Lighting in the Commercial Building Sector: Opportunities...

    Energy Savers [EERE]

    Site Lighting in the Commercial Building Sector: Opportunities, Challenges, and the CBEA Performance Specification LED Site Lighting in the Commercial Building Sector: ...

  8. Yuma Border Patrol Area Lighting Retrofit LED System Performance...

    Energy Savers [EERE]

    Host Site: Yuma Border Patrol, Yuma, Arizona April 2015 Prepared for: Solid-State Lighting ... Pacific Northwest National Laboratory Yuma Border Patrol Area Lighting Retrofit LED System ...

  9. Lighting for Health: LEDs in the New Age of Illumination

    SciTech Connect (OSTI)

    2014-05-01

    DOE Solid-State Lighting program technology fact sheet that provides background on current science and considerations related to LED light and health.

  10. DOE Announces Webinars on Maintenance Practices for LED Streetlights...

    Office of Environmental Management (EM)

    Webinar sponsor: DOE's Municipal Solid-State Street Lighting Consortium The Energy ... their cities' respective LED street lighting programs and lessons learned along the ...

  11. LED Lighting Facts/CALiPER Snapshot. Outdoor Ambient Lighting

    SciTech Connect (OSTI)

    2013-07-01

    Snapshot reports reveal how today's products really perform, drawing on analysis of verified performance data from the LED Lighting Facts program's online product list.

  12. Text-Alternative Version: LED Site Lighting in the Commercial...

    Energy Savers [EERE]

    Site Lighting in the Commercial Building Sector: Opportunities, Challenges, and the CBEA Performance Specification Text-Alternative Version: LED Site Lighting in the Commercial ...

  13. LEDS Collaboration in Action Workshop Open Space Sessions | Open...

    Open Energy Info (EERE)

    LEDS Collaboration in Action Workshop Open Space Sessions Jump to: navigation, search Low Emission Development Strategies Global Partnership Advancing climate-resilient,...

  14. Color Maintenance of LEDs in Laboratory and Field Applications...

    Office of Scientific and Technical Information (OSTI)

    Royer, Michael P.; Tuttle, Ralph; Rosenfeld, Scott M.; Miller, Naomi J. Light-emitting diode (LED), color shift, color stability, color maintenance, warranty Light-emitting...

  15. IADB/UNDP LEDS Community of Practice | Open Energy Information

    Open Energy Info (EERE)

    to communicate different methods for preparation of LED strategies including: The involvement of sectors and stakeholders Updating GHG inventories Preparation and analysis of...

  16. Demonstration of LED Street Lighting in Kansas City, MO (Technical...

    Office of Scientific and Technical Information (OSTI)

    not expected to be reached by the LED products until some distant future date (between 12 and 30 years after installation according to manufacturer specification sheet estimates). ...

  17. LEDs Go Ivy League: Princeton University and DOE GATEWAY Demonstrations

    Office of Energy Efficiency and Renewable Energy (EERE)

    View the video about LED lighting at Princeton University, which has dramatically reduced energy costs in a number of installations around campus. William Evans, electrical engineer, describes the...

  18. LEDS Collaboration in Action Workshop Biography | Open Energy...

    Open Energy Info (EERE)

    LEDS Collaboration in Action Workshop Biography Jump to: navigation, search Low Emission Development Strategies Global Partnership Advancing climate-resilient, low-emission...

  19. Reducing LED Costs Through Innovation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Researchers at Eaton are developing a new manufacturing process will enable LED chips to sit directly on heat sinks, improving heat transfer. | Photo courtesy of Eaton Corporation ...

  20. Energy Department Announces New University-Led Projects to Create...

    Broader source: Energy.gov (indexed) [DOE]

    Chu announced today new investments totaling 10 million over five years for two university-led projects to advance innovative concentrating solar power (CSP) system technologies. ...

  1. Application Assessment of Bi-Level LED Parking Lot Lighting

    SciTech Connect (OSTI)

    Johnson, Megan; Cook, Tyson; Shackelford, Jordan; Pang, Terrance

    2009-02-01

    This report summarizes an assessment project conducted to evaluate light-emitting diode (LED) luminaires with bi-level operation in an outdoor parking lot application.

  2. LEDS Collaboration in Action Workshop Contact Us | Open Energy...

    Open Energy Info (EERE)

    LEDS Collaboration in Action Workshop Contact Us Jump to: navigation, search Low Emission Development Strategies Global Partnership Advancing climate-resilient, low-emission...

  3. LED Provides Effective and Efficient Parking Area Lighting at...

    Office of Environmental Management (EM)

    LED Provides Effective and Efficient Parking Area Lighting at the NAVFAC Engineering Service Center Document details new lighting technology that reduces energy consumption and ...

  4. #AskEnergySaver: LED Lights | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LED Lights #AskEnergySaver: LED Lights April 24, 2014 - 6:00pm Addthis LED lights are six to seven times more energy efficient than conventional incandescent lights, cut energy use by more than 80 percent and can last more than 25 times longer. | Photo courtesy of Dennis Schroeder, NREL. LED lights are six to seven times more energy efficient than conventional incandescent lights, cut energy use by more than 80 percent and can last more than 25 times longer. | Photo courtesy of Dennis Schroeder,

  5. LED Color Stability: 10 Important Questions | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LED Color Stability: 10 Important Questions LED Color Stability: 10 Important Questions This April 15, 2014 webinar examined the causes of color shift, and took a look at existing metrics used to describe color shift/color stability in LED lighting. The lumen maintenance lifetime of many LED products is 25,000 hours or more, but that doesn't mean products are guaranteed to perform the same over that time. One thing that could change is the color of the light, or chromaticity. Presenters Michael

  6. Model Specification for LED Roadway Luminaires Webcast | Department...

    Energy Savers [EERE]

    how it can be customized to meet the particular needs of individual organizations in order to help them put together effective bid documents for LED street lighting products. ...

  7. REA Refrigerated Display Case LED Lighting Performance Specification...

    Broader source: Energy.gov (indexed) [DOE]

    A Retailer Energy Alliances (REA) Project PDF icon rearefrigdisplayspec.pdf More Documents & Publications CBEA LED Site Lighting Specification - Version 1.3, Released 2152012 ...

  8. High Impact Technology HQ - Results - LED Troffer, Cove (linear...

    Energy Savers [EERE]

    Icahn Laboratory More Documents & Publications DOE Booth Presentations From Grainger Show 2015 Downloads Exterior LED Lighting Projects at Princeton University Snapshot: Downlights

  9. LED LUMINAIRE LIFETIME: Recommendations for Testing and Reporting...

    Energy Savers [EERE]

    More Documents & Publications System Reliability Model for Solid-State Lighting Luminaires LED Luminaire Lifetime: Recommendations For Testing and Reporting System Reliability ...

  10. High Bandgap Phosphide Approaches for LED Applications - Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A new approach to fabricating high-efficiency Amber LEDs National Renewable Energy Laboratory Contact NREL About This Technology Publications: PDF Document Publication AlInP Green ...

  11. Tag: Nuclear Deterrence | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Deterrence Tag: Nuclear Deterrence Displaying 1 - 10 of 13... Category: Nuclear Deterrence Completing the connection A team from Malmstrom Air Force Base recently toured Y-12's production facilities. More... Category: Nuclear Deterrence Sharing resources: the benefits of consolidation Three Y-12 employees recently completed temporary assignments at Pantex. More... Category: Nuclear Deterrence Support Facilities The Y-12 site comprises more than 250 non-production facilities that help

  12. Tag: technology transfer | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    technology transfer Tag: technology transfer Displaying 1 - 10 of 12... Category: News CNS, UT chemical sensing technology wins R&D 100 Award An inexpensive, small and portable chemical sensor developed by Consolidated Nuclear Security, LLC researchers at the Y-12 National Security Complex and the University of Tennessee received a pres More... Category: News CNS research teams named 2015 R&D 100 Award finalists CNS partners with universities on significant technology advances. More...

  13. Anatomic and Functional Imaging of Tagged Molecules in Animals - Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Innovation Portal Anatomic and Functional Imaging of Tagged Molecules in Animals Thomas Jefferson National Accelerator Facility Contact TJNAF About This Technology Technology Marketing SummaryA novel functional imaging system for use in the imaging of unrestrained and non-anesthetized small animals or other subjects and a method for acquiring such images and further registering them with anatomical X-ray images previously or subsequently acquired.DescriptionThe apparatus comprises a

  14. Tag: Emergency Management | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Emergency Management Tag: Emergency Management Displaying 1 - 4 of 4... Category: News Y-12 to conduct June 8 Emergency Management exercise People in the vicinity of the Y-12 NSC may observe personnel simulating response activities and performing environmental monitoring or sampling. More... Category: News Oak Ridge Reservation Emergency Sectors Changing The Tennessee Emergency Management Agency realigns boundaries to improve response More... Category: News Sirens to sound for August 14 Y-12

  15. Tag: small business | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    small business Tag: small business Displaying 1 - 4 of 4... Category: News BES Technologies receives DOE small business award Mentor-Protégé relationship continues to receive Federal accolades. More... Category: News CNS reinforces commitment to small businesses Small businesses represent the backbone of our economy and the backbone of our success at CNS. More... Category: News CNS presents small business awards Consolidated Nuclear Security presented small business awards Friday, Sept. 18, at

  16. Tag: uranium processing facility | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    uranium processing ... Tag: uranium processing facility Displaying 1 - 3 of 3... Category: News UPF Project celebrates changing the Y-12 skyline Groundbreaking Ceremony Held for the Construction Support Building More... Category: News From aging infrastructure to the unaparalleled UPF The proposed Uranium Processing Facility upgrades most Building 9212 processes to modern equipment and complies with today's nuclear safety and security standards. More... Category: Nuclear Deterrence Processing

  17. Believing Your Eyes: Strengthening the Reliability of Tags and Seals

    SciTech Connect (OSTI)

    Brim, Cornelia P.; Denlinger, Laura S.

    2013-07-01

    NNSA’s Office of Nonproliferation and International Security (NIS) is working together with scientific experts at the DOE national laboratories to develop the tools needed to safeguard and secure nuclear material from diversion, theft, and sabotage--tasks critical to support future arms control treaties that may involve the new challenge of monitoring nuclear weapons dismantlement. Use of optically stimulated luminescent material is one method to enhance the security and robustness of existing tamper indicating devices such as tags and seals.

  18. LED Chips and Packaging for 120 LPW SSL Component

    SciTech Connect (OSTI)

    Ibbetson, James

    2009-12-28

    Cree has developed a new, high-efficiency, low-cost, light emitting diode (LED) lamp module that should be capable of replacing standard, halogen, fluorescent and metal halide lamps based on the total cost of ownership. White LEDs are produced by combining one or more saturated color LEDs with a phosphor or other light down-converting media to achieve white broad-band illumination. This two year project addressed LED chip and package efficiency improvements to establish a technology platform suitable for low-cost, high-efficiency commercial luminaires. Novel photonic-crystal LEDs were developed to improve the light extraction efficiency of blue GaN-based LEDs compared to the baseline technology. Improved packaging designs that reduced down-conversion and absorption related light losses, led to a higher overall LED efficiency. Specifically, blue LEDs were demonstrated with light output nearing 600 mW and an external quantum efficiency greater than 60 percent (using 1 mm2 chips at an operating current of 350 mA). The results were achieved using a novel, production capable photonic-crystal LED fabrication process. These LEDs formed the basis for a multi-chip white lamp module prototype, which provided 510 lumens light output at a correlated color temperature (CCT) of 3875 K and an operating current of 350 mA per 1mm2 chip. The overall conversion efficiency at 4100 K improved to ~ 65%. The resulting efficacy is 112 lumens per watt (LPW) a 33% improvement over the start of the project. In addition, a proof-of-concept luminaire was demonstrated that provided a flux of 1700 lumens at a 3842 K CCT.

  19. Appraisers Project Plan: Wireless Controls and Retrofit LED Lighting Demonstration

    Broader source: Energy.gov [DOE]

    Appraisers Project Plan: Wireless Controls and Retrofit LED Lighting Demonstration Measurement and Verification Report This report details the measurement and verification tools and methods used to evaluate the effectiveness of wireless lighting controls and LED lighting at the Appraisers Building, a federal office building in San Francisco, CA.

  20. Low Cost Lithography Tool for High Brightness LED Manufacturing

    SciTech Connect (OSTI)

    Andrew Hawryluk; Emily True

    2012-06-30

    The objective of this activity was to address the need for improved manufacturing tools for LEDs. Improvements include lower cost (both capital equipment cost reductions and cost-ofownership reductions), better automation and better yields. To meet the DOE objective of $1- 2/kilolumen, it will be necessary to develop these highly automated manufacturing tools. Lithography is used extensively in the fabrication of high-brightness LEDs, but the tools used to date are not scalable to high-volume manufacturing. This activity addressed the LED lithography process. During R&D and low volume manufacturing, most LED companies use contact-printers. However, several industries have shown that these printers are incompatible with high volume manufacturing and the LED industry needs to evolve to projection steppers. The need for projection lithography tools for LED manufacturing is identified in the Solid State Lighting Manufacturing Roadmap Draft, June 2009. The Roadmap states that Projection tools are needed by 2011. This work will modify a stepper, originally designed for semiconductor manufacturing, for use in LED manufacturing. This work addresses improvements to yield, material handling, automation and throughput for LED manufacturing while reducing the capital equipment cost.

  1. LOW-COST LED LUMINAIRE FOR GENERAL ILLUMINATION

    SciTech Connect (OSTI)

    Lowes, Ted

    2014-07-31

    During this two-year Solid-State Lighting (SSL) Manufacturing R&D project Cree developed novel light emitting diode (LED) technologies contributing to a cost-optimized, efficient LED troffer luminaire platform emitting at ~3500K correlated color temperature (CCT) at a color rendering index (CRI) of >90. To successfully achieve program goals, Cree used a comprehensive approach to address cost reduction of the various optical, thermal and electrical subsystems in the luminaire without impacting performance. These developments built on Cree’s high- brightness, low-cost LED platforms to design a novel LED component architecture that will enable low-cost troffer luminaire designs with high total system efficacy. The project scope included cost reductions to nearly all major troffer subsystems as well as assembly costs. For example, no thermal management components were included in the troffer, owing to the optimized distribution of compact low- to mid-power LEDs. It is estimated that a significant manufacturing cost savings will result relative to Cree’s conventional troffers at the start of the project. A chief project accomplishment was the successful development of a new compact, high-efficacy LED component geometry with a broad far-field intensity distribution and even color point vs. emission angle. After further optimization and testing for production, the Cree XQ series of LEDs resulted. XQ LEDs are currently utilized in Cree’s AR series troffers, and they are being considered for use in other platforms. The XQ lens geometry influenced the independent development of Cree’s XB-E and XB-G high-voltage LEDs, which also have a broad intensity distribution at high efficacy, and are finding wide implementation in Cree’s omnidirectional A-lamps.

  2. Controlling LED Color-Tunable Products Text-alternative Version |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Controlling LED Color-Tunable Products Text-alternative Version Controlling LED Color-Tunable Products Text-alternative Version This is the text-alternative version of Controlling LED Color-Tunable Products. Specifiers need to think very carefully when they are specifying controls for color-tunable luminaires. The ease of using that control is key. If the controls are too complex, they're not going to be used, or they're going to be abandoned or someone's going to

  3. Optimized Phosphors for Warm White LED Light Engines

    SciTech Connect (OSTI)

    Setlur, Anant; Brewster, Megan; Garcia, Florencio; Hill, M. Christine; Lyons, Robert; Murphy, James; Stecher, Tom; Stoklosa, Stan; Weaver, Stan; Happek, Uwe; Aesram, Danny; Deshpande, Anirudha

    2012-07-30

    The objective of this program is to develop phosphor systems and LED light engines that have steady-state LED efficacies (using LEDs with a 60% wall-plug efficiency) of 105–120 lm/W with correlated color temperatures (CCT) ~3000 K, color rendering indices (CRI) >85, <0.003 distance from the blackbody curve (dbb), and <2% loss in phosphor efficiency under high temperature, high humidity conditions. In order to reach these goals, this involves the composition and processing optimization of phosphors previously developed by GE in combination with light engine package modification.

  4. LED Traffic Lights Get Buy American Stamp | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    documents provides an overview of LED T8 replacement lamps and helps define a reasonable minimum performance level for the purpose of plant-wide improvement. LED T8 Replacement Lamps (April 2010) (809.84 KB) More Documents & Publications Emerging Lighting Technology Guiding Market Introduction of High-Performance SSL Products DOE Booth Presentations From Grainger Show 2015 Downloads

    LED traffic lights are assembled at Dialight’s factory in Roxboro, N.C. The company has expanded

  5. MOF Coating a Promising Path to White LEDs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MOF Coating a Promising Path to White LEDs MOF Coating a Promising Path to White LEDs Print Friday, 27 February 2015 17:11 Hu et al. designed a new yellow phosphor with high quantum yield by immobilizing a preslected chromophore into the rigid framework of a metal-organic framework (MOF); the structure was determined at Beamline 11.3.1. Coating a blue light-emitting diode (LED) with this compound readily generates white light with high luminous efficacy. The new yellow phosphor demonstrates

  6. Shedding new light on LEDs | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    new light on LEDs By Louise Lerner * April 18, 2012 Tweet EmailPrint LEDs, or light-emitting diodes, are the secret behind your iPhone screen, flatscreen TVs, Christmas lights and crosswalk signals. They can last longer and save more energy than traditional incandescent bulbs. But there is one thing they aren't very good at: efficiently emitting light in the yellow-green spectrum. Argonne and Purdue researchers are peering deep into the atomic structure and composition of LED lights in order to

  7. Understanding LED Color-Tunable Products Text-alternative Version |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Understanding LED Color-Tunable Products Text-alternative Version Understanding LED Color-Tunable Products Text-alternative Version This is the text-alternative version of Understanding LED Color-Tunable Products. Color-tunable luminaires are different from normal luminaires in that instead of being one constant color they can change in color. We have three basic flavors on the market. One is called dim-to-warm, which starts out at a normal whitish color-- like a 3000k

  8. University of Nevada Las Vegas LED Display Engineering

    SciTech Connect (OSTI)

    2010-08-31

    The primary objective of this part of the project is to develop and implement a method that compensates for the inefficiency of the green LED. The proposed engineering solution which will be the backbone of this project will be to use RGBW combination in every pixel to save energy. Two different RGBW geometrical pixel configurations will be implemented and compared against traditional LED configurations. These configurations will be analyzed for energy efficiency while keeping the quality of the display the same. Cost of the addition of white LEDs to displays along with energy cost savings will be presented and analyzed.

  9. LED Lighting on the National Mall | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    "Using energy-efficient LED light bulbs is an important way Americans can save money by saving energy," said Secretary Chu. "Investing in an American economy that is built to ...

  10. LEDS Collaboration in Action Workshop | Open Energy Information

    Open Energy Info (EERE)

    on LEDS globally. The workshop goals were to: Convene low emissions development and low carbon growth decision-makers Promote South-South and North-South collaboration and...

  11. White LED with High Package Extraction Efficiency (Technical...

    Office of Scientific and Technical Information (OSTI)

    Visit OSTI to utilize additional information resources in energy science and technology. A ... the blue light from the LED die and converts it into a broad green-yellow emission. ...

  12. Slideshow: Flipping the Switch on LED Lighting for the National...

    Broader source: Energy.gov (indexed) [DOE]

    "Using energy-efficient LED light bulbs is an important way Americans can save money by saving energy," said Secretary Chu. "Investing in an American economy that is built to ...

  13. DOE Publishes Third GATEWAY Report on LED System Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the performance of LED luminaires in the Yuma (Arizona) Sector Border Patrol Area, on the U.S.-Mexico border, which is a high-temperature, high-solar-radiation environment. ...

  14. DOE Science Showcase - Light-emitting Diode (LED) Lighting Research...

    Office of Scientific and Technical Information (OSTI)

    LED Research Information in DOE Databases SciTech Connect National Library of EnergyBeta Science.gov Ciencia.Science.gov WorldWideScience.org Visit the Science Showcase homepage. ...

  15. EECBG Success Story: Solar LED Light Pilot Project Illuminates...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    solar-powered LED lights that replaced natural gas-powered streetlights in the city of Deming, New Mexico. | DOE photo EECBG Success Story: Energy Efficiency in New Mexico Frees ...

  16. Solid State Lighting LED Product Development and Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... The FY17 milestone remains a good target for luminaires. The typical price of a 3,500 lumen 2'x4' LED troffer at 100 lmW is currently about 90-95 per unit, however work is ...

  17. Demonstration Assessment of Light Emitting Diode (LED) Street...

    Energy Savers [EERE]

    Demonstration Assessment of Light Emitting Diode (LED) Street Lighting Host Site: City of Oakland, California Final Report prepared in support of the U.S. DOE Solid-State Lighting ...

  18. National Consortium Supports Cities in Evaluating LED Streetlights

    SciTech Connect (OSTI)

    2013-09-30

    Fact sheet that introduces Municipal Solid-State Street Lighting Consortium, a group of municipalities, utilities, and energy efficiency organizations who are interested in making investments in LED street and area lighting.

  19. LED Luminaire Lifetime: Recommendations for Testing and Reporting

    Broader source: Energy.gov (indexed) [DOE]

    ... As of July 2013, 200 sample lamps had been continuously tested at a 45 o C ambient temperature for over 25,000 hours. This is perhaps the largest publicly available data set on LED ...

  20. Laboratory Evaluation of LED T8 Replacement Lamp Products

    SciTech Connect (OSTI)

    Richman, Eric E.; Kinzey, Bruce R.; Miller, Naomi J.

    2011-05-23

    A report on a lab setting analysis involving LED lamps intended to directly replace T8 fluorescent lamps (4') showing light output, power, and economic comparisons with other fluorescent options.

  1. Parking Savings Through LED Project for Iowa City | Department...

    Broader source: Energy.gov (indexed) [DOE]

    grant and rebate from utility. City to save 66,000 annually with energy efficient LED lights in parking garages. Project will reduce energy usage by 1.4 million kWh...

  2. DOE Publishes Fact Sheet on LED Lighting and Health

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy has published a fact sheet that looks at what's known—and not known—about the effects of lighting on human health, with specific reference to LEDs. Entitled Lighting...

  3. Text-Alternative Version: LED Color Stability Webinar

    Broader source: Energy.gov [DOE]

    Michael Royer: All right, welcome ladies and gentleman. I'm Michael Royer of Pacific Northwest National Laboratory, and I'd like to welcome you to today's webinar on LED Color Stability, Ten...

  4. Advances in Chip Technology, Packaging Enable White LED Breakthroughs

    Broader source: Energy.gov [DOE]

    Significant advances in chip technology have enabled Cree, Inc.'s Santa Barbara Technology Center to demonstrate white LEDs with record efficacies as high as 74 lumens per watt - on par with...

  5. EECBG Success Story: Small Nebraska Town Welcomes LEDs and Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Welcomes LEDs and Energy Savings EECBG Success Story: Small Town Using Wind Power to Offset Electricity Costs EECBG Success Story: Out with the Old, In with the New: New ...

  6. Stage 1: Organizing the LEDS Process | Open Energy Information

    Open Energy Info (EERE)

    public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development...

  7. Identify roles and responsibilities for LEDS process | Open Energy...

    Open Energy Info (EERE)

    public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development...

  8. Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting

    SciTech Connect (OSTI)

    Kinzey, B. R.; Myer, M. A.

    2009-11-01

    A U.S. Department of Energy Solid-State Lighting Gateway Report on a Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting in Lija Loop, Portland, Oregon.

  9. EECBG Success Story: LEDs Ready for Takeoff at Louisiana Airport

    Broader source: Energy.gov [DOE]

    About 250 lights along the taxiway at Hammond Northshore Regional Airport in Louisiana are being replaced with light-emitting diodes (LEDs) with funds from an Energy Efficiency and Conservation Block Grant (EECBG). Learn more.

  10. LED Lights for All Occasions | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    What does this mean for me? Energy-efficient LED lights can be used to save money while decorating this holiday season. The topic of lighting is no stranger to the Energy Saver ...

  11. DOE Publishes GATEWAY Report on Portland's LED Streetlight Conversion...

    Broader source: Energy.gov (indexed) [DOE]

    matters, and the Portland Bureau of Transportation was an early investigator of LED street lighting and one of the first public agencies to join DOE's Municipal Solid-State Street ...

  12. LED Watch: A Specifier's Guide to Color-Tunable Lighting

    Energy Savers [EERE]

    ... Some systems LED WATCH A SPECIFIER'S GUIDE TO COLOR-TUNABLE LIGHTING Be sure to check all the boxes when investigating the array of new products L ED luminaires with the ability to ...

  13. Integrated LED-based luminare for general lighting

    DOE Patents [OSTI]

    Dowling, Kevin J.; Lys, Ihor A.; Roberge, Brian; Williamson, Ryan C.; Roberts, Ron; Datta, Michael; Mollnow, Tomas; Morgan, Frederick M.

    2013-03-05

    Lighting apparatus and methods employing LED light sources are described. The LED light sources are integrated with other components in the form of a luminaire or other general purpose lighting structure. Some of the lighting structures are formed as Parabolic Aluminum Reflector (PAR) luminaires, allowing them to be inserted into conventional sockets. The lighting structures display beneficial operating characteristics, such as efficient operation, high thermal dissipation, high output, and good color mixing.

  14. Integrated LED-based luminaire for general lighting

    DOE Patents [OSTI]

    Dowling, Kevin J.; Lys, Ihor A.; Williamson, Ryan C.; Roberge, Brian; Roberts, Ron; Morgan, Frederick; Datta, Michael Jay; Mollnow, Tomas Jonathan

    2016-08-30

    Lighting apparatus and methods employing LED light sources are described. The LED light sources are integrated with other components in the form of a luminaire or other general purpose lighting structure. Some of the lighting structures are formed as Parabolic Aluminum Reflector (PAR) luminaires, allowing them to be inserted into conventional sockets. The lighting structures display beneficial operating characteristics, such as efficient operation, high thermal dissipation, high output, and good color mixing.

  15. Federally Led Accident Investigation Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federally Led Accident Investigation Reports Federally Led Accident Investigation Reports Includes Pre-March 2011 Type A Reports April 21, 2015 Accident Investigations of the February 14, 2014, Radiological Release at the Waste Isolation Pilot Plant, Carlsbad, NM On Friday, February 14, 2014, there was a release of radioactive material in the underground repository at the Department of Energy (DOE) Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico. Following initial visual inspections

  16. Get the Facts: LED Street Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Get the Facts: LED Street Lighting Get the Facts: LED Street Lighting June 21, 2016 - 12:11pm Addthis The American Medical Association's (AMA) recently adopted community guidance on street lighting adds another influential voice to issues that have been discussed in the lighting community for some time now, regarding light at night, its potential impacts on human health and the environment, and how best to minimize those impacts. While the AMA's guidance is intended to reduce the harmful human

  17. Gravitational waves found, black-hole models led the way

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Gravitational waves found, black-hole models led the way Gravitational waves found, black-hole models led the way Gravitational waves were predicted by Einstein's theory of general relativity in 1916, and now, almost exactly 100 years later, the faint ripples across space-time have been found. February 11, 2016 A simulation of two merging black holes, creating gravitational waves. Photo courtesy of LIGO. A simulation of two merging black holes, creating gravitational waves. Photo courtesy of

  18. LED Street Lighting Conversion Workshop Presentations | Department of

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy View the video about CALiPER Report Series 21 on LED Linear Lamps and Troffer Lighting, featuring interviews with Tracy Beeson and Naomi Miller of Pacific Northwest National Laboratory. View the text-alternative version Department of Energy

    Luminaire Lifetime: September 2014 (774.47 KB) More Documents & Publications System Reliability Model for Solid-State Lighting Luminaires LED LUMINAIRE LIFETIME: Recommendations for Testing and Reporting Lifetime and

  19. White LED Benchmark of 65 Lumens Per Watt Achieved

    Broader source: Energy.gov [DOE]

    Novel chip design and the balance of multiple interrelated design parameters have enabled Cree, Inc.'s Santa Barbara Technology Center to demonstrate white LEDs with efficacies greater than 65 lumens per watt at 350 mA. The results are particularly significant because they were achieved with a pre-production prototype chip using the same package used in Cree's commercially available XLamp® 7090 high power LED, rather than a laboratory device.

  20. Analysis Led Intake Port Development | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Led Intake Port Development Analysis Led Intake Port Development 2005 Diesel Engine Emissions Reduction (DEER) Conference Presentations and Posters 2005_deer_fuchinoue.pdf (537.33 KB) More Documents & Publications 2015 Peer Review Presentations-Cookstoves Vehicle Technologies Office Merit Review 2016: Lean Miller Cycle System Development for Light-Duty Vehicles High-Load Partially Premixed Combustion in a Heavy-Duty Diesel Engine

  1. Municipal Consortium LED Street Lighting Workshop Presentations and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Materials-Boston, MA | Department of Energy Boston, MA Municipal Consortium LED Street Lighting Workshop Presentations and Materials-Boston, MA This page provides links to the presentations given at the DOE Municipal Solid-State Street Lighting Consortium Workshop held in Boston August 2-3, 2012. Workshop Agenda DOE Municipal Solid-State Street Lighting Consortium James Brodrick, U.S. Department of Energy Boston's LED Street Lighting Initiative Joanne Massaro, Glenn Cooper, Matthew Mayrl,

  2. LED Site Lighting in the Commercial Building Sector: Opportunities,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Challenges, and the CBEA Performance Specification | Department of Energy Site Lighting in the Commercial Building Sector: Opportunities, Challenges, and the CBEA Performance Specification LED Site Lighting in the Commercial Building Sector: Opportunities, Challenges, and the CBEA Performance Specification This March 26, 2009 webcast presented information about the Commercial Building Energy Alliances' (CBEA) efforts to explore the viability of LED site lighting in commercial parking lots.

  3. An Integrated Solid-State LED Luminaire for General Lighting

    SciTech Connect (OSTI)

    Kevin Dowling; Fritz Morgan Ihor Lys; Mike Datta; Bernd Keller; Thomas Yuan

    2009-03-31

    A strong systems approach to designing and building practical LED-based replacement lamps is lacking. The general method of taking high-performance LEDs and marrying them to standard printed circuit boards, drivers and a heat sink has fallen short of the promise of LED lighting. In this program, a top-down assessment of requirements and a bottom-up reinvention of LED sources, electronics, optics and mechanics have resulted in the highest performance lamp possible. The team, comprised of Color Kinetics, the leaders in LED lighting and Cree, the leaders in LED devices took an approach to reinvent the package, the driver and the overall form and aesthetic of a replacement source. The challenge was to create a new benchmark in LED lighting - the resultant lamp, a PAR38 equivalent, met the light output, color, color quality and efficacy marks set out in the program as well as being dimmable, which is important for market acceptance. The approach combined the use of multiple source die, a chip-on-board approach, a very efficient driver topology, the use of both direct emission and phosphor conversion, and a unique faceted optic to avoid the losses, artifacts and hotspots of lensed approaches. The integral heat sink provided a mechanical base and airflow using a chimney-effect for use in a wide variety of locations and orientations. These research results led to a much better understanding of the system effects of component level technologies. It was clear that best-of-breed sub-system results do not necessarily result in the best end result for the complete system. In doing this work, we did not neglect the practical aspects of these systems. These were not rarified results and commercially impractical but lent themselves to eventual commercial products in the marketplace. The end result - a high performance replacement lamp - will save significant energy while providing a high-quality light source.

  4. Article Published on LED Lumen Maintenance and Light Loss Factors

    Broader source: Energy.gov [DOE]

    An article has been published in LEUKOS: The Journal of the Illuminating Engineering Society of North America (IES) that may be of interest to the solid-state lighting community. Entitled "Lumen Maintenance and Light Loss Factors: Consequences of Current Design Practices for LEDs," the article was written by Michael Royer of Pacific Northwest National Laboratory and discusses complications related to the lamp lumen depreciation (LLD) light loss factor and LEDs.

  5. UTag: Long-range Ultra-wideband Passive Radio Frequency Tags

    SciTech Connect (OSTI)

    Dowla, F

    2007-03-14

    Long-range, ultra-wideband (UWB), passive radio frequency (RF) tags are key components in Radio Frequency IDentification (RFID) system that will revolutionize inventory control and tracking applications. Unlike conventional, battery-operated (active) RFID tags, LLNL's small UWB tags, called 'UTag', operate at long range (up to 20 meters) in harsh, cluttered environments. Because they are battery-less (that is, passive), they have practically infinite lifetimes without human intervention, and they are lower in cost to manufacture and maintain than active RFID tags. These robust, energy-efficient passive tags are remotely powered by UWB radio signals, which are much more difficult to detect, intercept, and jam than conventional narrowband frequencies. The features of long range, battery-less, and low cost give UTag significant advantage over other existing RFID tags.

  6. Stable isotope, site-specific mass tagging for protein identification

    DOE Patents [OSTI]

    Chen, Xian

    2006-10-24

    Proteolytic peptide mass mapping as measured by mass spectrometry provides an important method for the identification of proteins, which are usually identified by matching the measured and calculated m/z values of the proteolytic peptides. A unique identification is, however, heavily dependent upon the mass accuracy and sequence coverage of the fragment ions generated by peptide ionization. The present invention describes a method for increasing the specificity, accuracy and efficiency of the assignments of particular proteolytic peptides and consequent protein identification, by the incorporation of selected amino acid residue(s) enriched with stable isotope(s) into the protein sequence without the need for ultrahigh instrumental accuracy. Selected amino acid(s) are labeled with .sup.13C/.sup.15N/.sup.2H and incorporated into proteins in a sequence-specific manner during cell culturing. Each of these labeled amino acids carries a defined mass change encoded in its monoisotopic distribution pattern. Through their characteristic patterns, the peptides with mass tag(s) can then be readily distinguished from other peptides in mass spectra. The present method of identifying unique proteins can also be extended to protein complexes and will significantly increase data search specificity, efficiency and accuracy for protein identifications.

  7. Secure optionally passive RFID tag or sensor with external power source and data logging

    DOE Patents [OSTI]

    Nekoogar, Faranak; Reynolds, Matthew; Lefton, Scott; Dowla, Farid; Twogood, Richard

    2016-05-31

    A secure optionally passive RFID tag or sensor system comprises a passive RFID tag having means for receiving radio signals from at least one base station and for transmitting radio signals to at least one base station, where the tag is capable of being powered exclusively by received radio energy, and an external power and data logging device having at least one battery and electronic circuitry including a digital memory configured for storing and recalling data. The external power and data logging device has a means for powering the tag, and also has a means.

  8. Color Maintenance of LEDs in Laboratory and Field Applications

    SciTech Connect (OSTI)

    Royer, Michael P.; Tuttle, Ralph; Rosenfeld, Scott M.; Miller, Naomi J.

    2013-09-30

    Synopsis: To date, consideration for parametric failure of LED products has largely been focused on lumen maintenance. However, color shift is a cause of early failure for some products, and is especially important to consider in certain applications, like museums, where visual appearance is critical. Example data collected by the GATEWAY program for LED lamps installed in museums shows that many have changed color beyond a reasonable tolerance well before their rated lifetime was reached, necessitating replacement. Similar data collected by the CALiPER program between 2008 and 2010 reveals that many early products shifted beyond acceptable tolerances in as little as a few thousand hours. In contrast, data from the L Prize program illustrates that commercially available LED products can have exemplary color stability that is unmatched by traditional light sources. Beyond presenting data from the aforementioned DOE programs, this report discusses the metrics used for communicating color shift—namely MacAdam ellipses and Δu'v'—as well as providing guidance for end users on how to monitor color shift and what to look for in manufacturer warranties. Also included are descriptions of the physical changes that have been documented as leading to color shift in some example types of LED packages. As with complete products, the data presented herein for LED packages shows that a wide variety of products are available; in order for specifiers and consumers to make educated choices, more detailed and standardized information should be made available.

  9. Highly Efficient Small Form Factor LED Retrofit Lamp

    SciTech Connect (OSTI)

    Steven Allen; Fred Palmer; Ming Li

    2011-09-11

    This report summarizes work to develop a high efficiency LED-based MR16 lamp downlight at OSRAM SYLVANIA under US Department of Energy contract DE-EE0000611. A new multichip LED package, electronic driver, and reflector optic were developed for these lamps. At steady-state, the lamp luminous flux was 409 lumens (lm), luminous efficacy of 87 lumens per watt (LPW), CRI (Ra) of 87, and R9 of 85 at a correlated color temperature (CCT) of 3285K. The LED alone achieved 120 lumens per watt efficacy and 600 lumen flux output at 25 C. The driver had 90% electrical conversion efficiency while maintaining excellent power quality with power factor >0.90 at a power of only 5 watts. Compared to similar existing MR16 lamps using LED sources, these lamps had much higher efficacy and color quality. The objective of this work was to demonstrate a LED-based MR16 retrofit lamp for replacement of 35W halogen MR16 lamps having (1) luminous flux of 500 lumens, (2) luminous efficacy of 100 lumens per watt, (3) beam angle less than 40{sup o} and center beam candlepower of at least 1000 candelas, and (4) excellent color quality.

  10. LED Lighting: Applying Lessons Learned from the CFL Experience

    SciTech Connect (OSTI)

    McCullough, Jeffrey J.; Gilbride, Theresa L.; Gordon, Kelly L.; Ledbetter, Marc R.; Sandahl, Linda J.; Ton, My K.

    2008-08-20

    Light emitting diode (LED) technology has emerged as an exciting new lighting alternative with the potential for significant energy savings. There is concern, however, that white light LEDs for general illumination could take a long, bumpy course similar to another energy-efficient lighting technology – compact fluorescent lights (CFLs). Recognizing the significant potential energy-efficient lighting has to reduce U.S. energy consumption, Congress mandated in the Energy Policy Act of 2005 that the U.S. Department of Energy (DOE) develop Solid State Lighting (SSL) through a Next Generation Lighting Initiative. DOE’s first step was to analyze the market introduction of compact fluorescent lighting to determine what lessons could be learned to smooth the introduction of SSL in the United States (Sandahl et al. 2006). This paper summarizes applicable lessons learned from the market introduction of CFLs and describe how DOE and others are applying those lessons to speed the development and market introduction of energy-efficient LED lighting for general illumination applications. A description of the current state of LED technology and compares LEDs to incandescent, fluorescent, and halogen lights is also provided.

  11. Tests gauge LED sensors for fuel-dye measurements

    SciTech Connect (OSTI)

    Ozanich, Richard M.; Lucke, Richard B.; Melville, Angela M.; Wright, Bob W.

    2009-10-19

    The goal of this work was to develop a low cost, robust sensor to allow direct measurement of Solvent Red 164 dye concentration in off-road fuel at refineries and fuel terminals. Optical absorption sensors based on light emitting diodes (LEDs) are rugged, low-cost, have low power consumption, and can be designed to be intrinsically safe.LED-based systems have been used in a variety of chemical detection applications including heavy metals, pH, CO2, and O2. The approach for this work was to develop a sensor that could be mounted on a pipeline sight glass, precluding the need for direct contact of the sensor with the fuel. Below is described the design and testing of three different LED/photodiode sensors utilizing reflectance spectrometry for the measurement of dye concentration.

  12. Survival of Seaward-Migrating PIT and Acoustic-Tagged Juvenile Chinook Salmon in the Snake and Columbia Rivers: An Evaluation of Length-Specific Tagging Effects

    SciTech Connect (OSTI)

    Brown, Richard S.; Oldenburg, Eric W.; Seaburg, Adam; Cook, Katrina V.; Skalski, John R.; Eppard, M. B.; Deters, Katherine A.

    2013-06-12

    Studies examining the survival of juvenile salmon as they emigrate to the ocean provide important information regarding the management of regulated river systems. Acoustic telemetry is a widely used tool for evaluating the behavior and survival of juvenile salmonids in the Columbia River basin. Thus, it is important to understand how the surgical tagging process and the presence of a transmitter affect survival so any biases can be accounted for or eliminated. This study evaluated the effects of fish length and tag type on the survival of yearling and subyearling Chinook salmon during their seaward migrations through the Snake and Columbia rivers during 2006, 2007, and 2008. Fish were collected at Lower Granite Dam on the Snake River (river kilometer 695) and implanted with either only a passive integrated transponder (PIT) tag (PIT fish) or both a PIT tag and an acoustic transmitter (AT fish). Survival was estimated from release at Lower Granite Dam to multiple downstream locations (dams) using the Cormack–Jolly–Seber single release model, and analysis of variance was used to test for differences among length-classes and between tag types. No length-specific tag effect was detected between PIT and AT fish (i.e., length affected the survival of PIT fish in a manner similar to which it affected the survival of AT fish). Survival among the smallest length class (i.e., 80–89 mm) of both PIT and AT subyearling Chinook salmon was markedly low (i.e., 4%). Fish length was positively correlated with the survival of both PIT and AT fish. Significant differences in survival were detected between tag types; the survival of PIT fish was generally greater than that of AT fish. However, confounding variables warrant caution in making strong inferences regarding this factor. Further, results suggest that tag effects may be due to the process of surgically implanting the transmitter rather than the presence of the transmitter.

  13. LED Down-Converter Phosphor Chips Containing Nanocrystals | Department of

    Broader source: Energy.gov (indexed) [DOE]

    April 15, 2014 webinar examined the causes of color shift, and took a look at existing metrics used to describe color shift/color stability in LED lighting. The lumen maintenance lifetime of many LED products is 25,000 hours or more, but that doesn't mean products are guaranteed to perform the same over that time. One thing that could change is the color of the light, or chromaticity. Presenters Michael Royer of Pacific Northwest National Laboratory, Ralph Tuttle of Cree, and Chad Stalker of

  14. LED Holiday Lights: Festive, Safe, and Efficient! | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LED Holiday Lights: Festive, Safe, and Efficient! LED Holiday Lights: Festive, Safe, and Efficient! November 23, 2010 - 6:30am Addthis Allison Casey Senior Communicator, NREL This week brings a day that many people look forward to all year-and I'm not talking about Thanksgiving, or Black Friday. I'm talking about that magical day when it's finally okay to drag the dusty boxes from the basement or attic, to lovingly sort and display your decorations, to untangle your light strings and set up the

  15. Annual Coded Wire Tag Program; Oregon Missing Production Groups, 1994 Annual Report.

    SciTech Connect (OSTI)

    Garrison, Robert L.; Isaac, Dennis L.; Lewis, Mark A.

    1994-12-01

    The goal of this program is to develop the ability to estimate hatchery production survival values and evaluate effectiveness of Oregon hatcheries. To accomplish this goal. We are tagging missing production groups within hatcheries to assure each production group is identifiable to allow future evaluation upon recovery of tag data.

  16. Methods And System Suppressing Clutter In A Gain-Block, Radar-Responsive Tag System

    DOE Patents [OSTI]

    Ormesher, Richard C.; Axline, Robert M.

    2006-04-18

    Methods and systems reduce clutter interference in a radar-responsive tag system. A radar transmits a series of linear-frequency-modulated pulses and receives echo pulses from nearby terrain and from radar-responsive tags that may be in the imaged scene. Tags in the vicinity of the radar are activated by the radar's pulses. The tags receive and remodulate the radar pulses. Tag processing reverses the direction, in time, of the received waveform's linear frequency modulation. The tag retransmits the remodulated pulses. The radar uses a reversed-chirp de-ramp pulse to process the tag's echo. The invention applies to radar systems compatible with coherent gain-block tags. The invention provides a marked reduction in the strength of residual clutter echoes on each and every echo pulse received by the radar. SAR receiver processing effectively whitens passive-clutter signatures across the range dimension. Clutter suppression of approximately 14 dB is achievable for a typical radar system.

  17. Genomic Sequence or Signature Tags (GSTs) from the Genome Group at Brookhaven National Laboratory (BNL)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Dunn, John J.; McCorkle, Sean R.; Praissman, Laura A.; Hind, Geoffrey; Van der Lelie, Daniel; Bahou, Wadie F.; Gnatenko, Dmitri V.; Krause, Maureen K.

    Genomic Signature Tags (GSTs) are the products of a method we have developed for identifying and quantitatively analyzing genomic DNAs. The DNA is initially fragmented with a type II restriction enzyme. An oligonucleotide adaptor containing a recognition site for MmeI, a type IIS restriction enzyme, is then used to release 21-bp tags from fixed positions in the DNA relative to the sites recognized by the fragmenting enzyme. These tags are PCR-amplified, purified, concatenated and then cloned and sequenced. The tag sequences and abundances are used to create a high resolution GST sequence profile of the genomic DNA. [Quoted from Genomic Signature Tags (GSTs): A System for Profiling Genomic DNA, Dunn, John J.; McCorkle, Sean R.; Praissman, Laura A.; Hind, Geoffrey; Van der Lelie, Daniel; Bahou, Wadie F.; Gnatenko, Dmitri V.; Krause, Maureen K., Revised 9/13/2002

  18. CALiPER Application Summary Report 15. LED Floodlights

    SciTech Connect (OSTI)

    none,

    2012-05-01

    This report analyzes the independently tested performance of 10 LED floodlights purchased between August and December 2011. The group included a wide range of products, both physically and in performance characteristics, which mirrors the nearly indefinite range of conventional luminaires designated as floodlights.

  19. Small Nebraska Town Welcomes LEDs and Energy Savings

    Broader source: Energy.gov [DOE]

    Tecumseh’s town historic town square is home to the city hall, courthouse, post office, and during the summer months—a farmers market. Now, this historic square, built in the 1850’s, is about to become home to something new: LED lights.

  20. Small Area Array-Based LED Luminaire Design

    SciTech Connect (OSTI)

    Thomas Yuan

    2008-01-09

    This report contains a summary of technical achievements during a three-year project to demonstrate high efficiency LED luminaire designs based on small area array-based gallium nitride diodes. Novel GaN-based LED array designs are described, specifically addressing the thermal, optical, electrical and mechanical requirements for the incorporation of such arrays into viable solid-state LED luminaires. This work resulted in the demonstration of an integrated luminaire prototype of 1000 lumens cool white light output with reflector shaped beams and efficacy of 89.4 lm/W at CCT of 6000oK and CRI of 73; and performance of 903 lumens warm white light output with reflector shaped beams and efficacy of 63.0 lm/W at CCT of 2800oK and CRI of 82. In addition, up to 1275 lumens cool white light output at 114.2 lm/W and 1156 lumens warm white light output at 76.5 lm/W were achieved if the reflector was not used. The success to integrate small area array-based LED designs and address thermal, optical, electrical and mechanical requirements was clearly achieved in these luminaire prototypes with outstanding performance and high efficiency.

  1. Ultratech Develops an Improved Lithography Tool for LED Wafer Manufacturing

    Broader source: Energy.gov [DOE]

    Ultratech modified an existing lithography tool used for semiconductor manufacturing to better meet the cost and performance targets of the high-brightness LED manufacturing industry. The goal was to make the equipment compatible with the wide range of substrate diameters and thicknesses prevalent in the industry while reducing the capital cost and the overall cost of ownership (COO).

  2. 130 LPW 1000 Lm Warm White LED for Illumination

    SciTech Connect (OSTI)

    Soer, Wouter

    2012-06-14

    An illumination-grade warm-white LED, having correlated color temperature (CCT) between 2700 and 3500 K and capable of producing 1000 lm output at over 130 lm/W at room temperature, has been developed in this program. The high-power warm-white LED is an ideal source for use in indoor and outdoor lighting applications. Over the two year period, we have made the following accomplishments: • Developed a low-cost high-power white LED package and commercialized a series of products with CCT ranging from 2700 to 5700 K under the product name LUXEON M; • Demonstrated a record efficacy of 124.8 lm/W at a flux of 1023 lm, CCT of 3435 K and color rendering index (CRI) over 80 at room temperature in the productized package; • Demonstrated a record efficacy of 133.1 lm/W at a flux of 1015 lm, CCT of 3475 K and CRI over 80 at room temperature in an R&D package. The new high-power LED package is a die-on-ceramic surface mountable LED package. It has four 2 mm2 InGaN pump dice, flip-chip attached to a ceramic submount in a 2x2 array configuration. The submount design utilizes a design approach that combines a high-thermal- conductivity ceramic core for die attach and a low-cost and low-thermal-conductivity ceramic frame for mechanical support and as optical lens carrier. The LED package has a thermal resistance of less than 1.25 K/W. The white LED fabrication also adopts a new batch level (instead of die-by-die) phosphor deposition process with precision layer thickness and composition control, which provides not only tight color control, but also low cost. The efficacy performance goal was achieved through the progress in following key areas: (1) high-efficiency royal blue pump LED development through active region design and epitaxial growth quality improvement (funded by internal programs); (2) improvement in extraction efficiency from the LED package through improvement of InGaN-die-level and package-level optical extraction efficiency; and (3) improvement in phosphor

  3. Preliminary evaluation of a fluorescence and radioisotope nuclear smuggling deterrence tag - final report (IL500E)

    SciTech Connect (OSTI)

    Hartenstein, S.D.; Aryaeinejad, R.; Delmastro, J.R.

    1997-04-01

    This report summarizes the efforts completed in identifying candidate fluorescence compounds and radioisotopes for a developing tagging system. The tagging system is being developed as a deterrent to nuclear smuggling, by providing a means of: (1) tracing materials and pilferers to the facility of origin for any recovered special nuclear materials, (2) inventory control of long-term stored items containing special nuclear materials, and (3) tracking materials transferred between facilities. The system uses three types of materials to cover a range of applications intended to prevent the pilfering of special nuclear materials. One material, fluorescent compounds which are invisible without ultraviolet or near-infrared detection systems, is marked on controlled items with a tracking pattern that corresponds to a specified item in a specified location in the data control system. The tagging system uses an invisible, fluorescent dusting powder to mark equipment and personnel who inappropriately handle the tagged material. The tagging system also uses unique combinations of radionuclides to identify the facility of origin for any special nuclear material. This report also summarizes the efforts completed in identifying hardware that will be used for the tagging system. This hardware includes the devices for applying the tagging materials, the commercially available fluorescence detection systems, and gamma ray detection systems assembled from existing, commercially available technologies.

  4. KLA-Tencor's Inspection Tool Reduces LED Manufacturing Costs

    Broader source: Energy.gov [DOE]

    With the help of DOE funding, KLA-Tencor is developing an improved inspection tool for LED manufacturing that promises to significantly increase overall process yields and minimize expensive waste. The power of the inspection tool lies in optical detection techniques coupled with defect source analysis software to statistically correlate front-end geometric anomalies in the substrate to killer defects on the back end of the manufacturing line, which give rise to an undesirable or unusable end product.

  5. Demonstration Assessment of LED Roadway Lighting: Philadelphia, PA

    SciTech Connect (OSTI)

    Royer, Michael P.; Tuenge, Jason R.; Poplawski, Michael E.

    2012-09-01

    For this demonstration assessment, 10 different groups of LED luminaires were installed at three sites in Philadelphia, PA. Each of the three sites represented a different set of conditions, most importantly with regard to the incumbent HPS luminaires, which were nominally 100 W, 150 W, and 250 W. The performance of each product was evaluated based on manufacturer data, illuminance calculations, field measurements of illuminance, and the subjective impressions of both regular and expert observers.

  6. OSRAM SYLVANIA Develops High-Efficiency LED Troffer Replacement

    Broader source: Energy.gov [DOE]

    With the help of DOE funding, OSRAM SYLVANIA is developing a high-efficiency LED 2'x2' troffer replacement that is expected to be commercially available in the spring of 2012 and to be cost-competitive with existing troffers of that size. It is projected to have a light output of up to 4,000 lumens, an efficacy of more than 100 lm/W, and a CCT of 3500K.

  7. Report 22.1: Photoelectric Performance of LED MR16 Lamps | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy 2.1: Photoelectric Performance of LED MR16 Lamps Report 22.1: Photoelectric Performance of LED MR16 Lamps caliper_22-1_mr16.pdf (4.52 MB) More Documents & Publications LED MR16 Lamps Caliper Retail Lamps Study 3.1: Dimming, Flicker, and Power Quality Characteristics of LED A Lamps LED Directional

  8. Demonstration of LED Street Lighting in Kansas City, MO

    SciTech Connect (OSTI)

    Kinzey, Bruce R.; Royer, Michael P.; Hadjian, M.; Kauffman, Rick

    2013-06-10

    Nine different streetlighting products were installed on various streets in Kansas City, Missouri during February, 2011, to evaluate their performance relative to the incumbent high-pressure sodium (HPS) lighting. The applications investigated included 100 W, 150 W, 250 W, and 400 W HPS installations. Initial measurements and comparisons included power, illuminance, and luminance; sample illuminance readings have continued at each of the nine locations at roughly 1,000-hour operating intervals since then. All of the LED products consumed less power than their HPS counterparts—with a mean difference of 39% and a range of 31% to 51%—but they also emitted 31% fewer lumens, on average. The net result is just a 15% increase in mean efficacy. Applying the city’s stringent light loss factors to the initial measured data meant that five of the LED products (and two of the HPS luminaires) were predicted to eventually fail to meet the specified mean illuminance over their lifetimes; however, the specified light loss levels are not expected to be reached by the LED products until some distant future date (between 12 and 30 years after installation according to manufacturer specification sheet estimates). The practical value of designing streetlighting systems to meet illumination requirements more than 15 years in the future is questioned. Numerous sources of variation in field measurements are noted throughout the report, particularly seasonal influences such as ambient temperature and foliage that are evident in the time-series illuminance data.

  9. PbTe/TAGS RTG Mars Environmental Survey (MESUR) mission

    SciTech Connect (OSTI)

    Schock, A. )

    1993-01-10

    The paper describes the results of studies on an RTG option for powering the global network of unmanned landers for NASA's Mars Environmental Survey (MESUR) mission. RTGs are essentially unaffected by diurnal and seasonal variations, Martian sandstorms, and landing site latitudes, and their waste heat can stabilize the temperatures of the landers and their payload. The RTG designs described in this paper are based on PbTe/TAGS thermoelectric elements, in contast to the SiGe-based RTGs the author described in previous publications. The presently described RTGs differ not only in the choice of thermoelectric materials but also in the use of much lower operating temperatures, conductive rather than radiative heat transfer, an inert cover gas instead of vacuum in the RTG's converter, and fibrous instead of multifoil thermal insulation. As in a previous Teledyne design, the Fairchild designs described in this paper employ flight-proven General Purpose Source modules and Close-Pack Arrays of thermoelectric converter modules. Illustrative point designs of RTGs producing 41 and 51 watts(e) at 28 volts are presented. The presented performance parameters were derived by detailed thermal, thermoelectric, and electrical analyses (including radiator geometry optimization) described in the paper. The Fairchild study showed that, with appropriate modifications, the Teledyne design can be scaled up to higher power levels, and it identified solutions to ensure adequate fuel clad ductility at launch temperatures and adequate thermal conductance from the thermoelectric cold ends to the RTG housing.

  10. Polarized light ions and spectator nucleon tagging at EIC

    SciTech Connect (OSTI)

    Guzey, Vadim; Higinbotham, Dougas W.; Hyde, Charles; Nadel-Turonski, Pawel A.; Park, Kijun; Sargsian, Misak M.; Strikman, Mark; Weiss, Christian

    2014-10-01

    The neutron's deep-inelastic structure functions provide essential information for the flavor separation of the nucleon parton densities, the nucleon spin decomposition, and precision studies of QCD phenomena in the flavor-singlet and nonsinglet sectors. Traditional inclusive measurements on nuclear targets are limited by dilution from scattering on protons, Fermi motion and binding effects, final-state interactions, and nuclear shadowing at x ll 0.1. An Electron-Ion Collider (EIC) would enable next-generation measurements of neutron structure with polarized deuteron beams and detection of forward-moving spectator protons over a wide range of recoil momenta (0 < p(R) < several 100MeV in the nucleus rest frame). The free neutron structure functions could be obtained by extrapolating the measured recoil momentum distributions to the on-shell point. The method eliminates nuclear modifications and can be applied to polarized scattering, as well as to semi-inclusive and exclusive final states. We review the prospects for neutron structure measurements with spectator tagging at EIC, the status of R&D efforts, and the accelerator and detector requirements.

  11. Application Summary Report 22: LED MR16 Lamps

    SciTech Connect (OSTI)

    Royer, Michael P.

    2014-07-23

    This report analyzes the independently tested photometric performance of 27 LED MR16 lamps. It describes initial performance based on light output, efficacy, distribution, color quality, electrical characteristics, and form factor, with comparisons to a selection of benchmark halogen MR16s and ENERGY STAR qualification thresholds. Three types of products were targeted. First, CALiPER sought 3000 K lamps with the highest rated lumen output (i.e., at least 500 lm) or a claim of equivalency to a 50 W halogen MR16 or higher. The test results indicate that while the initial performance of LED MR16s has improved across the board, market-available products still do not produce the lumen output and center beam intensity of typical 50 W halogen MR16 lamps. In fact, most of the 18 lamps in this category had lower lumen output and center beam intensity than a typical 35 W halogen MR16 lamp. Second, CALiPER sought lamps with a CRI of 90 or greater. Only four manufacturers were identified with a product in this category. CALiPER testing confirmed the performance of these lamps, which are a good option for applications where high color fidelity is needed. A vast majority of the LED MR16 lamps have a CRI in the low 80s; this is generally acceptable for ambient lighting, but may not always be acceptable for focal lighting. For typical LED packages, there is a fundamental tradeoff between CRI and efficacy, but the lamps in the high-CRI group in this report still offer comparable performance to the rest of the Series 22 products in other performance areas. Finally, CALiPER sought lamps with a narrow distribution, denoted as a beam angle less than 15°. Five such lamps were purchased. Notably, no lamp was identified as having high lumen output (500 lumens or greater), high CRI (90 or greater), a narrow distribution (15° or less), and an efficacy greater than 60 lm/W. This would be an important achievement for LED MR16s especially if output could reach approximately 700 800 lumens

  12. LED Lighting Facts® Program Supports Accuracy in SSL Product Information

    SciTech Connect (OSTI)

    2013-09-30

    Fact sheet that provides a summary of LED Lighting Facts, a program to assure that LED lighting is accurately represented in the marketplace, illustrated by the LED Lighting Facts label to disclose product performance data.

  13. New CALiPER Snapshot on LED Downlights | Department of Energy

    Office of Environmental Management (EM)

    New CALiPER Snapshot on LED Downlights New CALiPER Snapshot on LED Downlights June 29, 2016 - 12:56pm Addthis DOE's CALiPER program has released a new Snapshot report on LED ...

  14. Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products Part 2: LED Manufacturing and Performance

    SciTech Connect (OSTI)

    Scholand, Michael; Dillon, Heather E.

    2012-05-01

    Part 2 of the project (this report) uses the conclusions from Part 1 as a point of departure to focus on two objectives: producing a more detailed and conservative assessment of the manufacturing process and providing a comparative LCA with other lighting products based on the improved manufacturing analysis and taking into consideration a wider range of environmental impacts. In this study, we first analyzed the manufacturing process for a white-light LED (based on a sapphire-substrate, blue-light, gallium-nitride LED pumping a yellow phosphor), to understand the impacts of the manufacturing process. We then conducted a comparative LCA, looking at the impacts associated with the Philips Master LEDbulb and comparing those to a CFL and an incandescent lamp. The comparison took into account the Philips Master LEDbulb as it is now in 2012 and then projected forward what it might be in 2017, accounting for some of the anticipated improvements in LED manufacturing, performance and driver electronics.

  15. A Study to Determine the Biological Feasability of a New Fish Tagging System : Annual Report, 1986-1987.

    SciTech Connect (OSTI)

    Prentice, Earl F.; Flagg, T.A.

    1987-12-01

    In 1983, a multi-year project to evaluate the technical and biological feasibility of adapting a new identification system to salmonids was established. The system is based upon a miniaturized passive integrated transponder (PIT) tag. This report discusses the work completed and is divided into laboratory studies, field studies, and systems development. All studies were conducted using a glass-encapsulated tag implanted into the body cavity of test fish via a 12-gauge hypodermic needle. Laboratory studies with juvenile chinook salmon, Oncorhynchus tshawytscha, showed that retention of glass-encapsulated PIT tags was 99-100% in fish weighing 3 g (mean weight) or larger. No adverse tissue response to the tag was noted. The survival of fish 5 g (mean weight) or larger was usually greater than 99%. However, fish ranging in weight from 2 to 4 g, or fish undergoing a physiological change such as smoltification may have a low mortality (usually less than 5.0%) after tagging. The mortality rate in the smaller fish was dependent upon tagging skill whereas mortality in smolting fish seemed dependent upon the level of stress. Growth comparisons between tagged and control fish indicated PIT-tagged fish had a slightly depressed growth rate at some measurement periods. The operational life of glass-encapsulated PIT tags implanted in fish was good, with 100% of the tags operating after 401 days. No tags were rejected from the fish during the observation period.

  16. High Efficacy Green LEDs by Polarization Controlled MOVPE

    SciTech Connect (OSTI)

    Wetzel, Christian

    2013-03-31

    Amazing performance in GaInN/GaN based LEDs has become possible by advanced epitaxial growth on a wide variety of substrates over the last decade. An immediate push towards product development and worldwide competition for market share have effectively reduced production cost and generated substantial primary energy savings on a worldwide scale. At all times of the development, this economic pressure forced very fundamental decisions that would shape huge industrial investment. One of those major aspects is the choice of epitaxial growth substrate. The natural questions are to what extend a decision for a certain substrate will limit the ultimate performance and to what extent, the choice of a currently more expensive substrate such as native GaN could overcome any of the remaining performance limitations. Therefore, this project has set out to explore what performance characteristic could be achieved under the utilization of bulk GaN substrate. Our work was guided by the hypotheses that line defects such as threading dislocations in the active region should be avoided and the huge piezoelectric polarization needs to be attenuated if not turned off for higher performing LEDs, particularly in the longer wavelength green and deep green portions of the visible spectrum. At their relatively lower performance level, deep green LEDs are a stronger indicator of relative performance improvements and seem particular sensitive to the challenges at hand. The project therefore made use of recently developed non-polar and semipolar bulk GaN substrates that were made available at Kyma Technologies by crystallographic cuts from thick polar growth of GaN. This approach naturally leads to rather small pieces of substrates, cm along the long side while mm along the short one. Small size and limited volume of sample material therefore set the limits of the ensuing development work. During the course of the project we achieved green and deep green LEDs in all those crystal growth

  17. Advancing the surgical implantation of electronic tags in fish: a gap analysis and research agenda based on a review of trends in intracoelomic tagging effects studies

    SciTech Connect (OSTI)

    Cooke, Steven J.; Woodley, Christa M.; Eppard, M. B.; Brown, Richard S.; Nielsen, Jennifer L.

    2011-03-08

    Early approaches to surgical implantation of electronic tags in fish were often through trial and error, however, in recent years there has been an interest in using scientific research to identify techniques and procedures that improve the outcome of surgical procedures and determine the effects of tagging on individuals. Here we summarize the trends in 108 peer-reviewed electronic tagging effect studies focused on intracoleomic implantation to determine opportunities for future research. To date, almost all of the studies have been conducted in freshwater, typically in laboratory environments, and have focused on biotelemetry devices. The majority of studies have focused on salmonids, cyprinids, ictalurids and centrarchids, with a regional bias towards North America, Europe and Australia. Most studies have focused on determining whether there is a negative effect of tagging relative to control fish, with proportionally fewer that have contrasted different aspects of the surgical procedure (e.g., methods of sterilization, incision location, wound closure material) that could advance the discipline. Many of these studies included routine endpoints such as mortality, growth, healing and tag retention, with fewer addressing sublethal measures such as swimming ability, predator avoidance, physiological costs, or fitness. Continued research is needed to further elevate the practice of electronic tag implantation in fish in order to ensure that the data generated are relevant to untagged conspecifics (i.e., no long-term behavioural or physiological consequences) and the surgical procedure does not impair the health and welfare status of the tagged fish. To that end, we advocate for i) rigorous controlled manipulations based on statistical designs that have adequate power, account for inter-individual variation, and include controls and shams, ii) studies that transcend the laboratory and the field with more studies in marine waters, iii) incorporation of knowledge and

  18. Feedback-Controlled LED Photobioreactor for Photophysiological Studies of Cyanobacteria

    SciTech Connect (OSTI)

    Melnicki, Matthew R.; Pinchuk, Grigoriy E.; Hill, Eric A.; Kucek, Leo A.; Stolyar, Sergey; Fredrickson, Jim K.; Konopka, Allan; Beliaev, Alex S.

    2013-04-09

    A custom photobioreactor (PBR) was designed to enable automatic light adjustments using computerized feedback control. A black anodized aluminum enclosure, constructed to surround the borosilicate reactor vessel, prevents the transmission of ambient light and serves as a mount for arrays of light-emitting diodes (LEDs). The high-output LEDs provide narrow-band light of either 630 or 680 nm for preferential excitation of the cyanobacterial light-harvesting pigments, phycobilin or chlorophyll a, respectively. Custom developed software BioLume provides automatic control of optical properties and a computer feedback loop can automatically adjust the incident irradiance as necessary to maintain a fixed transmitted light through the culture, based on user-determined set points. This feedback control serves to compensate for culture dynamics which have optical effects, (e.g., changing cell density, pigment adaptations) and thus can determine the appropriate light conditions for physiological comparisons or to cultivate light-sensitive strains, without prior analyses. The LED PBR may also be controlled as a turbidostat, using a feedback loop to continuously adjust the rate of media-dilution based on the transmitted light measurements, with a fast and precise response. This cultivation system gains further merit as a high-performance analytical device, using non-invasive tools (e.g., dissolved gas sensors, online mass spectrometry) to automate real-time measurements, thus permitting unsupervised experiments to search for optimal growth conditions, to monitor physiological responses to perturbations, as well as to quantitate photophysiological parameters using an in situ light-saturation response routine.

  19. Method of remote powering and detecting multiple UWB passive tags in an RFID system

    DOE Patents [OSTI]

    Dowla, Farid U.; Nekoogar, Faranak; Benzel, David M.; Dallum, Gregory E.; Spiridon, Alex

    2012-05-29

    A new Radio Frequency Identification (RFID), tracking, powering apparatus/system and method using coded Ultra-wideband (UWB) signaling is introduced. The proposed hardware and techniques disclosed herein utilize a plurality of passive UWB transponders in a field of an RFID-radar system. The radar system itself enables multiple passive tags to be remotely powered (activated) at about the same time frame via predetermined frequency UWB pulsed formats. Once such tags are in an activated state, an UWB radar transmits specific "interrogating codes" to put predetermined tags in an awakened status. Such predetermined tags can then communicate by a unique "response code" so as to be detected by an UWB system using radar methods.

  20. Annual Coded Wire Tag Program; Washington Missing Production Groups, 1993 Annual Report.

    SciTech Connect (OSTI)

    Fuss, Howard J.; Hammer, Stanley A.; Kimbel, Mark A. (Washington Department of Fisheries, Olympia, WA)

    1994-03-01

    The intent of this project is to coded-wire tag at least one production group of each species at each Columbia Basin hatchery to provide a holistic assessment of survival and catch distribution over time.

  1. Reminder of eTag 1.8.2 Migration - March 13, 2015

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    eTag-1.8.2-Migration---March-13,-2015 Sign In About | Careers | Contact | Investors | bpa.gov Search Doing Business Expand Doing Business Customer Involvement Expand Customer...

  2. DOE Publishes New Report on Dimming LEDs with Phase-Cut Dimmers...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    by energy efficiency organizations and specifiers, and is ... The new report reviews how phase-cut dimmers work, how LEDs ... procedures for designing phase-controlled LED ...

  3. DOE Publishes CALiPER Report on LED T8 Lamps | Department of...

    Energy Savers [EERE]

    Likewise, some of the LED lamps had similar color quality and power quality to their fluorescent counterparts. But none of the LED products matched the luminous intensity ...

  4. Shenzhen Bang Bell Electronics Co Ltd BBE LED | Open Energy Informatio...

    Open Energy Info (EERE)

    Bang Bell Electronics Co Ltd BBE LED Jump to: navigation, search Name: Shenzhen Bang-Bell Electronics Co Ltd (BBE LED) Place: Shenzhen, Guangdong Province, China Zip: 518110...

  5. Use of Occupancy Sensors in LED Parking Lot and Garage Applications...

    Office of Scientific and Technical Information (OSTI)

    Experiences Kinzey, Bruce R.; Myer, Michael; Royer, Michael P.; Sullivan, Greg P. LED lighting; parking lot lighting; occupancy sensors LED lighting; parking lot lighting;...

  6. Demonstration Assessment of Light Emitting Diode (LED) Street Lighting, Final Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    This report summarizes an LED street lighting assessment project conducted to study the applicability of LED luminaires in a street lighting application.

  7. The US TAG What is it, Why Should I care? | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The US TAG What is it, Why Should I care? The US TAG What is it, Why Should I care? Presented at the PV Module Reliability Workshop, February 26 - 27 2013, Golden, Colorado pvmrw13_ps3_powermark_mikonowicz.pdf (269.33 KB) More Documents & Publications Technical Standards Newsletter - December 2002 Agenda for the PV Module Reliability Workshop, February 26 - 27 2013, Golden, Colorado Solar America Board for Codes and Standards-- 2013 Progress Update

  8. System and method for simultaneously collecting serial number information from numerous identity tags

    DOE Patents [OSTI]

    Doty, Michael A.

    1997-01-01

    A system and method for simultaneously collecting serial number information reports from numerous colliding coded-radio-frequency identity tags. Each tag has a unique multi-digit serial number that is stored in non-volatile RAM. A reader transmits an ASCII coded "D" character on a carrier of about 900 MHz and a power illumination field having a frequency of about 1.6 Ghz. A one MHz tone is modulated on the 1.6 Ghz carrier as a timing clock for a microprocessor in each of the identity tags. Over a thousand such tags may be in the vicinity and each is powered-up and clocked by the 1.6 Ghz power illumination field. Each identity tag looks for the "D" interrogator modulated on the 900 MHz carrier, and each uses a digit of its serial number to time a response. Clear responses received by the reader are repeated for verification. If no verification or a wrong number is received by any identity tag, it uses a second digital together with the first to time out a more extended period for response. Ultimately, the entire serial number will be used in the worst case collision environments; and since the serial numbers are defined as being unique, the final possibility will be successful because a clear time-slot channel will be available.

  9. System and method for simultaneously collecting serial number information from numerous identity tags

    DOE Patents [OSTI]

    Doty, M.A.

    1997-01-07

    A system and method are disclosed for simultaneously collecting serial number information reports from numerous colliding coded-radio-frequency identity tags. Each tag has a unique multi-digit serial number that is stored in non-volatile RAM. A reader transmits an ASCII coded ``D`` character on a carrier of about 900 MHz and a power illumination field having a frequency of about 1.6 Ghz. A one MHz tone is modulated on the 1.6 Ghz carrier as a timing clock for a microprocessor in each of the identity tags. Over a thousand such tags may be in the vicinity and each is powered-up and clocked by the 1.6 Ghz power illumination field. Each identity tag looks for the ``D`` interrogator modulated on the 900 MHz carrier, and each uses a digit of its serial number to time a response. Clear responses received by the reader are repeated for verification. If no verification or a wrong number is received by any identity tag, it uses a second digital together with the first to time out a more extended period for response. Ultimately, the entire serial number will be used in the worst case collision environments; and since the serial numbers are defined as being unique, the final possibility will be successful because a clear time-slot channel will be available. 5 figs.

  10. Ultra-secure RF Tags for Safeguards and Security - SBIR Phase II Final Report

    SciTech Connect (OSTI)

    Twogood, Richard E

    2015-01-27

    This is the Final Report for the DOE Phase II SBIR project “Ultra-secure RF Tags for Safeguards and Security.” The topics covered herein include technical progress made, progress against the planned milestones and deliverables, project outcomes (results, collaborations, intellectual property, etc.), and a discussion on future expectations of deployment and impacts of the results of this work. In brief, all planned work for the project was successfully completed, on or ahead of schedule and on budget. The major accomplishment was the successful development of a very advanced passive ultra-secure RFID tag system with combined security features unmatched by any commercially available ones. These tags have high-level dynamic encrypted authentication, a novel tamper-proofing mechanism, system software including graphical user interfaces and networking, and integration with a fiber-optic seal mechanism. This is all accomplished passively (with no battery) by incorporating sophisticated hardware in the tag which harvests the energy from the RFID readers that are interrogating the tag. Based on initial feedback (and deployments) at DOE’s Lawrence Livermore National Laboratory (LLNL), it is anticipated these tags and their offspring will meet DOE and international community needs for highly secure RFID systems. Beyond the accomplishment of those original objectives for the ultra-secure RF tags, major new spin-off thrusts from the original work were identified and successfully pursued with the cognizance of the DOE sponsor office. In particular, new classes of less sophisticated RFID tags were developed whose lineage derives from the core R&D thrusts of this SBIR. These RF “tag variants” have some, but not necessarily all, of the advanced characteristics described above and can therefore be less expensive and meet far wider markets. With customer pull from the DOE and its national laboratories, new RFID tags and systems (including custom readers and software) for

  11. An evaluation of the maximum tag burden for implantation of acoustic transmitters in juvenile Chinook salmon

    SciTech Connect (OSTI)

    Brown, Richard S.; Harnish, Ryan A.; Carter, Kathleen M.; Boyd, James W.; Deters, Katherine A.; Eppard, M. B.

    2010-04-01

    Abstract.—The influence of a surgically implanted acoustic micro-transmitter and passive integrated transponder (PIT) tag on the growth and survival of hatchery-reared juvenile Chinook salmon was examined. Growth and survival were compared between treatment (implanted) and control fish within three fork length (FL) size groups (80-89, 90-99, and 100-109 mm). The acoustic micro-transmitter and PIT tag implanted in our study had a combined weight of 0.74 g. Weights of study fish ranged from 4.7 to 16.3 g for treatment fish and from 5.1 to 16.8 g for control fish. The burden for the combined acoustic and PIT tag experienced by implanted fish ranged from 8.8% to 15.7% for the 80-89 mm FL group, 6.0-10.9% for the 90-99 mm FL group, and 4.5-8.6% for the 100-109 mm FL group. Results indicated that growth and survival were size-dependent among implanted juvenile Chinook salmon. Significant differences in growth rate and survival were observed between treatment and control fish in the 80-89 mm FL group. Within this group, growth of fish smaller than 88.5 mm FL (tag burden > 10.0%) was negatively affected by the implantation or presence of an acoustic micro-transmitter and PIT tag. Survival of fish in the 90-99 mm FL group did not differ between treatment and control fish. However, survival of implanted fish within this size group that were smaller than 97.2 mm FL (tag burden > 7.4%) was negatively influenced. These results indicate that the burden of an acoustic micro-transmitter and PIT tag should be maintained at or below about 7.0% for studies that use hatchery-reared juvenile Chinook salmon.

  12. Passive micromechanical tags. An investigation into writing information at nanometer resolution on micrometer size objects

    SciTech Connect (OSTI)

    Schmieder, R.W.; Bastasz, R.J.

    1995-01-01

    The authors have completed a 3-year study of the technology related to the development of micron-sized passive micromechanical tags. The project was motivated by the discovery in 1990 by the present authors that low energy, high charge state ions (e.g., Xe{sup +44}) can produce nanometer-size damage sites on solid surfaces, and the realization that a pattern of these sites represents information. It was envisioned that extremely small, chemically inert, mechanical tags carrying a large label could be fabricated for a variety of applications, including tracking of controlled substances, document verification, process control, research, and engineering. Potential applications exist in the data storage, chemical, food, security, and other industries. The goals of this project were fully accomplished, and they are fully documented here. The work was both experimental and developmental. Most of the experimental effort was a search for appropriate tag materials. Several good materials were found, and the upper limits of information density were determined (ca. 10{sup 12} bit/cm{sup 2}). Most of the developmental work involved inventing systems and strategies for using these tags, and compiling available technologies for implementing them. The technology provided herein is application-specific: first, the application must be specified, then the tag can be developed for it. The project was not intended to develop a single tag for a single application or for all possible applications. Rather, it was meant to provide the enabling technology for fabricating tags for a range of applications. The results of this project provide sufficient information to proceed directly with such development.

  13. Overview of the Performance of PIT-Tag Interrogation Systems for Adult Salmonids at Bonneville and McNary Dams, 2002.

    SciTech Connect (OSTI)

    Downing, Sandra L.; Prentice, Earl F.

    2003-06-01

    During winter 2001, the U.S. Army Corps of Engineers (Corps) and Bonneville Power Administration (BPA) installed a prototype orifice-based PIT-tag interrogation system into the Washington Shore Ladder at Bonneville Dam (BWSL). Detectors were installed into 12 weirs: 4 downstream (Weirs 334-337) and 8 upstream (Weirs 352-359) from the fish release point (i.e., the exit ladder for the Adult Fish Facility). NOAA Fisheries (National Marine Fisheries Service--NMFS) tagged and released salmonids during 2001 to determine tag-reading efficiencies for different salmonid populations. Data analyses focused on the upper eight weirs. The 2001 tagging results for spring chinook salmon indicated that having detectors in four consecutive weirs would have been sufficient to yield a reading efficiency of 95%. The BWSL orifice-based system performed well until the coho and fall chinook salmon migrations began. Coho and fall chinook salmon appeared to use the weir overflows, and thus avoid detection, at much higher rates than biologists expected. During 2001, technology advances led to the development of significantly larger antennas than had been available earlier, and thus it was possible to build antennas of approximately 2 x 6 ft. Consequently, it became feasible to design interrogation systems for ladder locations where all fish would have to go through the antennas and thus could not avoid detection by using the weir overflows (Fig. 1). Destron Technologies by Digital Angel designed a prototype interrogation system with two antennas that was installed into the counting-window area in the Oregon Ladder at McNary Dam, where its performance could then be directly compared to that of the orifice-based system in the same ladder. Although the orifice-based systems appeared less effective than the fisheries community wanted for fall chinook and coho salmon, the decision was made to proceed with installations planned for Bonneville and McNary Dams because valuable data would still be

  14. Cyanine-based probe\\tag-peptide pair fluorescence protein imaging and fluorescence protein imaging methods

    DOE Patents [OSTI]

    Mayer-Cumblidge, M. Uljana; Cao, Haishi

    2013-01-15

    A molecular probe comprises two arsenic atoms and at least one cyanine based moiety. A method of producing a molecular probe includes providing a molecule having a first formula, treating the molecule with HgOAc, and subsequently transmetallizing with AsCl.sub.3. The As is liganded to ethanedithiol to produce a probe having a second formula. A method of labeling a peptide includes providing a peptide comprising a tag sequence and contacting the peptide with a biarsenical molecular probe. A complex is formed comprising the tag sequence and the molecular probe. A method of studying a peptide includes providing a mixture containing a peptide comprising a peptide tag sequence, adding a biarsenical probe to the mixture, and monitoring the fluorescence of the mixture.

  15. Expert system for identification of simultaneous and sequential reactor fuel failures with gas tagging

    DOE Patents [OSTI]

    Gross, K.C.

    1994-07-26

    Failure of a fuel element in a nuclear reactor core is determined by a gas tagging failure detection system and method. Failures are catalogued and characterized after the event so that samples of the reactor's cover gas are taken at regular intervals and analyzed by mass spectroscopy. Employing a first set of systematic heuristic rules which are applied in a transformed node space allows the number of node combinations which must be processed within a barycentric algorithm to be substantially reduced. A second set of heuristic rules treats the tag nodes of the most recent one or two leakers as background'' gases, further reducing the number of trial node combinations. Lastly, a fuzzy'' set theory formalism minimizes experimental uncertainties in the identification of the most likely volumes of tag gases. This approach allows for the identification of virtually any number of sequential leaks and up to five simultaneous gas leaks from fuel elements. 14 figs.

  16. Expert system for identification of simultaneous and sequential reactor fuel failures with gas tagging

    DOE Patents [OSTI]

    Gross, Kenny C.

    1994-01-01

    Failure of a fuel element in a nuclear reactor core is determined by a gas tagging failure detection system and method. Failures are catalogued and characterized after the event so that samples of the reactor's cover gas are taken at regular intervals and analyzed by mass spectroscopy. Employing a first set of systematic heuristic rules which are applied in a transformed node space allows the number of node combinations which must be processed within a barycentric algorithm to be substantially reduced. A second set of heuristic rules treats the tag nodes of the most recent one or two leakers as "background" gases, further reducing the number of trial node combinations. Lastly, a "fuzzy" set theory formalism minimizes experimental uncertainties in the identification of the most likely volumes of tag gases. This approach allows for the identification of virtually any number of sequential leaks and up to five simultaneous gas leaks from fuel elements.

  17. Store operation with conditional push of a tag value to a queue

    SciTech Connect (OSTI)

    Heidelberger, Philip; Steinmacher-Burow, Burkhard

    2015-07-28

    According to one embodiment, a method for a store operation with a conditional push of a tag value to a queue is provided. The method includes configuring a queue that is accessible by an application, setting a value at an address in a memory device including a memory and a controller, receiving a request for an operation using the value at the address and performing the operation. The method also includes the controller writing a result of the operation to the address, thus changing the value at the address, the controller determining if the result of the operation meets a condition and the controller pushing a tag value to the queue based on the condition being met, where the tag value in the queue indicates to the application that the condition is met.

  18. Optimized Design and Synthesis of Cell Permeable Biarsenical Cyanine Probe for Imaging Tagged Cytosolic Bacterial Proteins

    SciTech Connect (OSTI)

    Fu, Na; Xiong, Yijia; Squier, Thomas C.

    2013-02-01

    To optimize cellular delivery and specific labeling of tagged cytosolic proteins by biarsenical fluorescent probes build around a cyanine dye scaffold, we have systematically varied the polarity of the hydrophobic tails (i.e., 4-5 methylene groups appended by a sulfonate or methoxy ester moiety) and arsenic capping reagent (ethanedithiol versus benzenedithiol). Targeted labeling of the cytosolic proteins SlyD and the alpha subunit of RNA polymerase engineered with a tetracysteine tagging sequences demonstrate the utility of the newly synthesized probes for live-cell visualization, albeit with varying efficiencies and background intensities. Optimal routine labeling and visualization is apparent using the ethanedithiol capping reagent with the uncharged methoxy ester functionalized acyl chains. These measurements demonstrate the general utility of this class of photostable and highly fluorescent biarsenical reagents based on the cyanine scaffold for in vivo targeting of tagged cellular proteins for live cell measurements of protein dynamics.

  19. A comparison of implantation methods for large PIT tags or injectable acoustic transmitters in juvenile Chinook salmon

    SciTech Connect (OSTI)

    Cook, Katrina V.; Brown, Richard S.; Deng, Zhiqun; Klett, Ryan S.; Li, Huidong; Seaburg, Adam; Eppard, M. B.

    2014-04-15

    The miniaturization of acoustic transmitters may allow greater flexibility in terms of the size and species of fish available to tag. New downsized injectable acoustic tags similar in shape to passive integrated transponder tags can be rapidly injected rather than surgically implanted through a sutured incision, as is current practice. Before wide-scale field use of these injectable transmitters, standard protocols to ensure the most effective and least damaging methods of implantation must be developed. Three implantation methods were tested in various sizes of juvenile Chinook salmon Oncorhynchus tschawytscha. Methods included a needle bevel-down injection, a needle bevel-up injection with a 90-degree rotation, and tag implantation through an unsutured incision. Tagged fish were compared to untagged control groups. Weight and wound area were measured at tagging and every week for 3 weeks; holding tanks were checked daily for mortalities and tag losses. No differences among treatments were found in growth, tag loss, or survival, but wound area was significantly reduced among incision-treated fish. The bevel-up injection had the worst results in terms of tag loss and wound area and also had high mortality. Implantation through an incision resulted in the lowest tag loss but the highest mortality. Fish from the bevel-down treatment group had the least mortality; wound areas also were smaller than the bevel-up treatment group. Cumulatively, the data suggest that the unsutured incision and bevel-down injection methods were the most effective; the drawbacks of both methods are described in detail. However, we further recommend larger and longer studies to find more robust thresholds for tagging size that include more sensitive measures.

  20. DOE Publishes Revised Report on Dimming LEDs with Phase-Cut Dimmers

    Broader source: Energy.gov [DOE]

    DOE has revised its October 2013 report, Dimming LEDs with Phase-Cut Dimmers: The Specifier's Process for Maximizing Success, to include updated information about the installation of LED lighting...

  1. DOE Publishes Technical Brief Clarifying Misconceptions about Safety of LED Lighting

    Broader source: Energy.gov [DOE]

    The spectral emission of LEDs is a frequent subject of concern, so to set the record straight, the U.S. Department of Energy has published a technical brief entitled True Colors: LEDs and the...

  2. Zimbabwe-Terms of Reference for Future LEDS | Open Energy Information

    Open Energy Info (EERE)

    (Redirected from CDKN-Zimbabwe-Terms of Reference for Future LEDS) Jump to: navigation, search Name Zimbabwe-Terms of Reference for Future LEDS AgencyCompany Organization Climate...

  3. DOE Publishes CALiPER Snapshot Report on LED A Lamps

    Broader source: Energy.gov [DOE]

    DOE's CALiPER program has released a Snapshot Report on LED A lamps, which utilizes the LED Lighting Facts program's extensive product database to help industry stakeholders understand the current state and trajectory of the market for that class

  4. File:(2010)2 full paper with cover LEDS FINAL (2).pdf | Open...

    Open Energy Info (EERE)

    (2010)2 full paper with cover LEDS FINAL (2).pdf Jump to: navigation, search File File history File usage File:(2010)2 full paper with cover LEDS FINAL (2).pdf Size of this...

  5. Intel Led OpenMP Training Session at NERSC This Wednesday March...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Led OpenMP Training Session at NERSC This Wednesday March 25 Intel Led OpenMP Training Session at NERSC This Wednesday March 25 March 24, 2015 by Katie Antypas This Wednesday, ...

  6. Team led by PPPL's Chang receives DOE 2015 INCITE award totaling...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Team led by PPPL's Chang receives DOE 2015 INCITE award totaling 270 million core hours to ... Center for Edge Physics Simulation (EPSI), led by C.S. Chang, a physicist at the U.S. ...

  7. Report 20.5: Chromaticity Shift Modes of LED PAR38 Lamps Operated...

    Energy Savers [EERE]

    5: Chromaticity Shift Modes of LED PAR38 Lamps Operated in Steady-State Conditions Report 20.5: Chromaticity Shift Modes of LED PAR38 Lamps Operated in Steady-State Conditions PDF ...

  8. Two PPPL-led teams win increased supercomputing time to study...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Two PPPL-led teams win increased supercomputing time to study conditions inside fusion ... Researchers led by scientists at the U.S. Department of Energy's (DOE) Princeton Plasma ...

  9. New GATEWAY Report Monitors LED System Performance in a High-Temperature Environment

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy has released a follow-up GATEWAY report on LED system performance at the Yuma (Arizona) Sector Border Patrol Area. Six LED luminaires – installed on three poles as...

  10. DOE Publishes CALiPER Report on the Photoelectric Performance of LED MR16 Lamps

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy's CALiPER program has released Report 22.1, which is part of a series of investigations on LED MR16 lamps. Report 22 investigated the photometric performance of 27 LED...

  11. Lumileds Develops Patterned Sapphire Substrate Technology for High-Power LEDs

    Broader source: Energy.gov [DOE]

    Patterned sapphire substrate (PSS) technology is an effective approach to improving efficacy and reducing cost of LEDs and has gained wide use in mid-power LEDs. With the help of DOE funding,...

  12. Webinar: The L Prize-Winning LED A19 Replacement-What Commercial...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The L Prize-Winning LED A19 Replacement-What Commercial Building OwnersOperators Can Expect in 2012 Webinar: The L Prize-Winning LED A19 Replacement-What Commercial Building ...

  13. Mexico-EC-LEDS in the Agriculture Sector | Open Energy Information

    Open Energy Info (EERE)

    EC-LEDS in the Agriculture Sector Jump to: navigation, search Name Mexico-EC-LEDS in the Agriculture Sector AgencyCompany Organization United States Department of Agriculture,...

  14. Demonstration Assessment of Light Emitting Diode (LED) Street Lighting, Phase III Continuation

    SciTech Connect (OSTI)

    Cook, Tyson; Shackelford, Jordan; Johnson, Megan; Pang, Terrance

    2008-11-01

    This report summarizes the third phase of an LED street lighting assessment project in Oakland, California, conducted to study the applicability of LED luminaires in a street lighting application.

  15. Text-Alternative Version: Successful Selection of LED Streetlight Luminaires Webcast

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "Successful Selection of LED Streetlight Luminaires" webcast, held March 6, 2013.

  16. CALiPER Benchmark Report: Performance of Halogen Incandescent MR16 Lamps and LED Replacement

    SciTech Connect (OSTI)

    Paget, M. L.; Lingard, R. D.; Myer, M. A.

    2008-11-01

    This benchmark report addresses the halogen MR16 lamp and its commercially available light-emitting diode (LED) replacements.

  17. Assessment of LED Technology in Ornamental Post-Top Luminaires. Sacramento, CA

    SciTech Connect (OSTI)

    Tuenge, J. R.; Bryan, M. M.; Bisbee, D. A.

    2011-12-01

    GATEWAY program report on a demonstration of LED ornamental post-top luminaires in a residential part of Sacramento, CA.

  18. Technical Feasibility Assessment of LED Roadway Lighting on the Golden Gate Bridge

    SciTech Connect (OSTI)

    Tuenge, J. R.

    2012-09-01

    GATEWAY program report on the technical feasibility of LED roadway lighting on the Golden Gate Bridge in San Francisco, CA.

  19. The City of Los Angeles LED Streetlight Program | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Resources » Videos » The City of Los Angeles LED Streetlight Program The City of Los Angeles LED Streetlight Program View the video about the Los Angeles LED streetlight program, featuring an interview with City of Los Angeles Bureau of Street Lighting Director, Ed Ebrahimian. View the text-alternative version. Solid-State Lighting Home About the Solid-State Lighting Program Research & Development SSL Basics Using LEDs Information Resources Conferences & Meetings

  20. Demonstration of LED Retrofit Lamps at the Smithsonian Art Museum, Washington, DC

    SciTech Connect (OSTI)

    Miller, N. J.; Rosenfeld, S. M.

    2012-06-01

    GATEWAY program report on a demonstration of LED retrofit lamps at the Smithsonian American Art Museum in Washington, DC.

  1. WEBINAR: LED LIGHTING IN A PERFORMING ARTS BUILDING | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    WEBINAR: LED LIGHTING IN A PERFORMING ARTS BUILDING WEBINAR: LED LIGHTING IN A PERFORMING ARTS BUILDING Can LEDs render skin tones and makeup accurately in a dressing room? Can they provide the vertical footcandles in a studio to make dancers' bodies visible, or deliver acting studio lighting to bring out facial expressions and body movements? Can LEDs deliver adequate flicker-free light in the Scene Shop, where students are using saws and other construction tools? And, can they compete with

  2. Text-Alternative Version: Model Specification for LED Roadway Luminaires Webcast

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "Model Specification for LED Roadway Luminaires" webcast, held November 15, 2011.

  3. Use of Occupancy Sensors in LED Parking Lot and Garage Applications: Early Experiences

    SciTech Connect (OSTI)

    Kinzey, B. R.; Myer, M. A.; Royer, M. P.; Sullivan, G. P.

    2012-10-01

    Final GATEWAY program report on the early experiences of using occupancy sensors in LED parking lot and garage applications.

  4. Vietnam-EC-LEDS in the Agriculture Sector | Open Energy Information

    Open Energy Info (EERE)

    Sector Climate, Land Focus Area Agriculture, Economic Development, Greenhouse Gas, Land Use Topics Adaptation, Implementation, Low emission development planning, -LEDS,...

  5. Costa Rica-EC-LEDS in the Agriculture Sector | Open Energy Information

    Open Energy Info (EERE)

    Sector Climate, Land Focus Area Agriculture, Economic Development, Greenhouse Gas, Land Use Topics Adaptation, Implementation, Low emission development planning, -LEDS,...

  6. Kenya-EC-LEDS in the Agriculture Sector | Open Energy Information

    Open Energy Info (EERE)

    Sector Climate, Land Focus Area Agriculture, Economic Development, Greenhouse Gas, Land Use Topics Adaptation, Implementation, Low emission development planning, -LEDS,...

  7. Technical description of candidate fluorescence compounds and radioisotopes for a nuclear smuggling deterrence tag (IL500E)

    SciTech Connect (OSTI)

    Hartenstein, S.D.; Aryaeinejad, R.

    1996-03-01

    This report summarizes the efforts completed in identifying candidate fluorescence compounds and radioisotopes for a developing tagging system. The tagging system is being developed as a deterrent to nuclear smuggling, by providing a means of: (1) tracing materials and pilferers to the facility of origin for any recovered special nuclear materials; (2) inventory control of long-term stored items containing special nuclear materials; and (3) tracking materials transferred between facilities. The tagging system uses four types of tagging materials to cover a range of applications intended to prevent the pilfering of special nuclear materials. One material, fluorescent compounds which are invisible without ultraviolet or near-infrared detection systems, is marked on controlled items with a tracking pattern that corresponds to a specified item in a specified location in the data control system. The tagging system uses an invisible, fluorescent dusting powder to mark equipment and personnel who inappropriately handle the tagged material. The tagging system also uses unique combinations of radionuclides to identify the facility of origin for any special nuclear material. Currently, 18 long-lived radioisotopes, 38 short-live radioisotopes and 10 fluorescent compounds have been selected as candidate materials for the tagging system.

  8. One-way implodable tag capsule with hemispherical beaded end cap for LWR fuel manufacturing

    DOE Patents [OSTI]

    Gross, K.; Lambert, J.

    1999-04-06

    A capsule is disclosed containing a tag gas in a zircaloy body portion having a hemispherical top curved toward the bottom of the body portion. The hemispherical top has a rupturable portion upon exposure to elevated gas pressure and the capsule is positioned within a fuel element in a nuclear reactor. 3 figs.

  9. TAGS 85/2N RTG Power for Viking Lander Capsule

    DOE R&D Accomplishments [OSTI]

    1969-08-01

    Results of studies performed by Isotopes, Inc., Nuclear Systems Division, to optimize and baseline a TAGS 85/2N RTG for the Viking Lander Capsule prime electrical power source are presented. These studies generally encompassed identifying the Viking RTG mission profile and design requirements, and establishing a baseline RTG design consistent with these requirements.

  10. One-way implodable tag capsule with hemispherical beaded end cap for LWR fuel manufacturing

    DOE Patents [OSTI]

    Gross, Kenny; Lambert, John

    1999-01-01

    A capsule containing a tag gas in a zircaloy body portion having a hemispical top curved toward the bottom of the body portion. The hemispherical top has a rupturable portion upon exposure to elevated gas pressure and the capsule is positioned within a fuel element in a nuclear reactor.

  11. Annual Coded Wire Tag Program; Washington Missing Production Groups, 1994 Annual Report.

    SciTech Connect (OSTI)

    Fuss, Howard J.; Ashbrook, Charmane; Doty, Daniel (Washington Department of Fish and Wildlife, Olympia, WA)

    1994-12-01

    The Bonneville Power Administration (BPA) funds the ``Annual Coded Wire Tag Program -- Missing Production Groups for Columbia River Hatcheries`` project. The Washington Department of Fish and Wildlife (WDFW) [formerly the Washington Department of Fisheries (WDF) and the Washington Department of Wildlife (WDW)], Oregon Department of Fish and Wildlife (ODFW) and the United States Fish and Wildlife Service (USFWS) all operate salmon and steelhead rearing programs in the Columbia River basin. The intent of the funding is to coded-wire tag at least one production group of each species at each Columbia Basin hatchery to provide a holistic assessment of survival and catch distribution over time. Data generated by this project contributes to WDFW`s obligations for representative tagging under the Endangered. Species Act (ESA) permit for operating Columbia Basin facilities. WDFW facilities operating outside the Snake River basin are required to have a Section 10, ``Incidental Take`` permit. Consistent with special conditions within this permit, WDFW has now reached it`s objective to tag representative groups from all WDFW Columbia Basin releases.

  12. A library of MiMICs allows tagging of genes and reversible, spatial and temporal knockdown of proteins in Drosophila

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Nagarkar-Jaiswal, Sonal; Lee, Pei-Tseng; Campbell, Megan E.; Chen, Kuchuan; Anguiano-Zarate, Stephanie; Cantu Gutierrez, Manuel; Busby, Theodore; Lin, Wen-Wen; He, Yuchun; Schulze, Karen L.; et al

    2015-03-31

    Here, we document a collection of ~7434 MiMIC (Minos Mediated Integration Cassette) insertions of which 2854 are inserted in coding introns. They allowed us to create a library of 400 GFP-tagged genes. We show that 72% of internally tagged proteins are functional, and that more than 90% can be imaged in unfixed tissues. Moreover, the tagged mRNAs can be knocked down by RNAi against GFP (iGFPi), and the tagged proteins can be efficiently knocked down by deGradFP technology. The phenotypes associated with RNA and protein knockdown typically correspond to severe loss of function or null mutant phenotypes. Finally, we demonstratemore » reversible, spatial, and temporal knockdown of tagged proteins in larvae and adult flies. This new strategy and collection of strains allows unprecedented in vivo manipulations in flies for many genes. These strategies will likely extend to vertebrates.« less

  13. A library of MiMICs allows tagging of genes and reversible, spatial and temporal knockdown of proteins in Drosophila

    SciTech Connect (OSTI)

    Nagarkar-Jaiswal, Sonal; Lee, Pei-Tseng; Campbell, Megan E.; Chen, Kuchuan; Anguiano-Zarate, Stephanie; Cantu Gutierrez, Manuel; Busby, Theodore; Lin, Wen-Wen; He, Yuchun; Schulze, Karen L.; Booth, Benjamin W.; Evans-Holm, Martha; Venken, Koen J.T.; Levis, Robert W.; Spradling, Allan C.; Hoskins, Roger A.; Bellen, Hugo J.

    2015-03-31

    Here, we document a collection of ~7434 MiMIC (Minos Mediated Integration Cassette) insertions of which 2854 are inserted in coding introns. They allowed us to create a library of 400 GFP-tagged genes. We show that 72% of internally tagged proteins are functional, and that more than 90% can be imaged in unfixed tissues. Moreover, the tagged mRNAs can be knocked down by RNAi against GFP (iGFPi), and the tagged proteins can be efficiently knocked down by deGradFP technology. The phenotypes associated with RNA and protein knockdown typically correspond to severe loss of function or null mutant phenotypes. Finally, we demonstrate reversible, spatial, and temporal knockdown of tagged proteins in larvae and adult flies. This new strategy and collection of strains allows unprecedented in vivo manipulations in flies for many genes. These strategies will likely extend to vertebrates.

  14. EERE Success Story-LED Lighting in the Classroom for Energy Efficiency

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Enhanced Learning | Department of Energy LED Lighting in the Classroom for Energy Efficiency and Enhanced Learning EERE Success Story-LED Lighting in the Classroom for Energy Efficiency and Enhanced Learning July 21, 2016 - 12:00pm Addthis EERE Success Story—LED Lighting in the Classroom for Energy Efficiency and Enhanced Learning EERE Success Story—LED Lighting in the Classroom for Energy Efficiency and Enhanced Learning EERE Success Story-LED Lighting in the Classroom for

  15. Annual Stock Assessment - CWT [Coded Wire Tag program] (USFWS), Annual Report 2007.

    SciTech Connect (OSTI)

    Pastor, Stephen M.

    2009-07-21

    In 1989 the Bonneville Power Administration (BPA) began funding the evaluation of production groups of juvenile anadromous fish not being coded-wire tagged for other programs. These groups were the 'Missing Production Groups'. Production fish released by the U.S. Fish and Wildlife Service (FWS) without representative coded-wire tags during the 1980s are indicated as blank spaces on the survival graphs in this report. This program is now referred to as 'Annual Stock Assessment - CWT'. The objectives of the 'Annual Stock Assessment' program are to: (1) estimate the total survival of each production group, (2) estimate the contribution of each production group to fisheries, and (3) prepare an annual report for USFWS hatcheries in the Columbia River basin. Coded-wire tag recovery information will be used to evaluate the relative success of individual brood stocks. This information can also be used by salmon harvest managers to develop plans to allow the harvest of excess hatchery fish while protecting threatened, endangered, or other stocks of concern. All fish release information, including marked/unmarked ratios, is reported to the Pacific States Marine Fisheries Commission (PSMFC). Fish recovered in the various fisheries or at the hatcheries are sampled to recover coded-wire tags. This recovery information is also reported to PSMFC. This report has been prepared annually starting with the report labeled 'Annual Report 1994'. Although the current report has the title 'Annual Report 2007', it was written in fall of 2008 using data available from RMIS that same year, and submitted as final in January 2009. The main objective of the report is to evaluate survival of groups which have been tagged under this ongoing project.

  16. Annual Coded Wire Tag Program; Missing Production Groups, 1996 Annual Report.

    SciTech Connect (OSTI)

    Pastor, Stephen M.

    1997-01-01

    In 1989 the Bonneville Power Administration (BPA) began funding the evaluation of production groups of juvenile anadromous fish not being coded-wire tagged for other programs. These groups were the ''Missing Production Groups''. Production fish released by the U.S. Fish and Wildlife Service (USFWS) without representative coded-wire tags during the 1980's are indicated as blank spaces on the survival graphs in this report. The objectives of the ''Missing Production Groups'' program are: (1) to estimate the total survival of each production group, (2) to estimate the contribution of each production group to various fisheries, and (3) to prepare an annual report for all USFWS hatcheries in the Columbia River basin. Coded-wire tag recovery information will be used to evaluate the relative success of individual brood stocks. This information can also be used by salmon harvest managers to develop plans to allow the harvest of excess hatchery fish while protecting threatened, endangered, or other stocks of concern. In order to meet these objectives, a minimum of one marked group of fish is necessary for each production release. The level of marking varies according to location, species, and age at release. In general, 50,000 fish are marked with a coded-wire tag (CWT) to represent each production release group at hatcheries below John Day Dam. More than 100,000 fish per group are usually marked at hatcheries above John Day Dam. All fish release information, including marked/unmarked ratios, is reported to the Pacific States Marine Fisheries Commission (PSMFC). Fish recovered in the various fisheries or at the hatcheries are sampled to recover coded-wire tags. This recovery information is also reported to PSMFC.

  17. Annual Coded Wire Tag Program : Missing Production Groups, 1995 Annual Report.

    SciTech Connect (OSTI)

    Pastor, Stephen M.

    1995-12-01

    In 1989 the Bonneville Power Administration (BPA) began funding the evaluation of production groups of juvenile anadromous fish not being coded-wire tagged for other programs. These groups were the ''Missing Production Groups''. Production fish released by the U.S. Fish and Wildlife Service (USFWS) without representative coded-wire tags during the 1980's are indicated as blank spaces on the survival graphs in this report. The objectives of the ''Missing Production Groups'' program are: (1) to estimate the total survival of each production group, (2) to estimate the contribution of each production group to various fisheries, and (3) to prepare an annual report for all USFWS hatcheries in the Columbia River Basin. Coded-wire tag recovery information will be used to evaluate the relative success of individual brood stocks. It can also be used by salmon harvest managers to develop plans to allow the harvest of excess hatchery fish while protecting threatened or endangered stocks. In order to meet these objectives, a minimum of one marked group of fish is necessary for each production release. The level of marking varies according to location, species, and age at release. In general, 50,000 fish are marked with a coded-wire tag (CWT) to represent each production release group at hatcheries below John Day Dam. Between 120,000 and 200,000 fish are marked for groups at hatcheries above John Day Dam. All fish release information, including marked/unmarked ratios, is reported to the Pacific States Marine Fisheries Commission (PSMFC). Fish recovered in the various fisheries or at the hatcheries are sampled to recover coded-wire tags. This recovery information is also reported to PSMFC.

  18. Surgically Implanted JSATS Micro-Acoustic Transmitters Effects on Juvenile Chinook Salmon and Steelhead Tag Expulsion and Survival, 2010

    SciTech Connect (OSTI)

    Woodley, Christa M.; Carpenter, Scott M.; Carter, Kathleen M.; Wagner, Katie A.; Royer, Ida M.; Knox, Kasey M.; Kim, Jin A.; Gay, Marybeth E.; Weiland, Mark A.; Brown, Richard S.

    2011-09-16

    The purpose of this study was to evaluate survival model assumptions associated with a concurrent study - Acoustic Telemetry Evaluation of Dam Passage Survival and Associated Metrics at John Day, The Dalles, and Bonneville Dams, 2010 by Thomas Carlson and others in 2010 - in which the Juvenile Salmonid Acoustic Telemetry System (JSATS) was used to estimate the survival of yearling and subyearling Chinook salmon (Oncorhynchus tshawytscha) and steelhead (O. mykiss) migrating through the Federal Columbia River Power System (FCRPS). The micro-acoustic transmitter used in these studies is the smallest acoustic transmitter model to date (12 mm long x 5 mm wide x 4 mm high, and weighing 0.43 g in air). This study and the 2010 study by Carlson and others were conducted by researchers from the Pacific Northwest National Laboratory and the University of Washington for the U.S. Army Corps of Engineers, Portland District, to meet requirements set forth by the 2008 FCRPS Biological Opinion. In 2010, we compared survival, tag burden, and tag expulsion in five spring groups of yearling Chinook salmon (YCH) and steelhead (STH) and five summer groups of subyearling Chinook salmon (SYC) to evaluate survival model assumptions described in the concurrent study. Each tagging group consisted of approximately 120 fish/species, which were collected and implanted on a weekly basis, yielding approximately 600 fish total/species. YCH and STH were collected and implanted from late April to late May (5 weeks) and SYC were collected and implanted from mid-June to mid-July (5 weeks) at the John Day Dam Smolt Monitoring Facility. The fish were collected once a week, separated by species, and assigned to one of three treatment groups: (1) Control (no surgical treatment), (2) Sham (surgical implantation of only a passive integrated transponder [PIT] tag), and (3) Tagged (surgical implantation of JSATS micro-acoustic transmitter [AT] and PIT tags). The test fish were held for 30 days in indoor

  19. The structure of the SBP-Tagstreptavidin complex reveals a novel helical scaffold bridging binding pockets on separate subunits

    SciTech Connect (OSTI)

    Barrette-Ng, Isabelle H.; Wu, Sau-Ching; Tjia, Wai-Mui; Wong, Sui-Lam; Ng, Kenneth K. S.

    2013-05-01

    The structure of the SBP-Tagstreptavidin complex reveals a novel mode of peptide recognition in which a single peptide binds simultaneously to biotin-binding pockets from adjacent subunits of streptavidin. The molecular details of peptide recognition suggest how the SBP-Tag can be further modified to become an even more useful tag for a wider range of biotechnological applications. The 38-residue SBP-Tag binds to streptavidin more tightly (K{sub d} ? 2.54.9 nM) than most if not all other known peptide sequences. Crystallographic analysis at 1.75 resolution shows that the SBP-Tag binds to streptavidin in an unprecedented manner by simultaneously interacting with biotin-binding pockets from two separate subunits. An N-terminal HVV peptide sequence (residues 1214) and a C-terminal HPQ sequence (residues 3133) form the bulk of the direct interactions between the SBP-Tag and the two biotin-binding pockets. Surprisingly, most of the peptide spanning these two sites (residues 1728) adopts a regular ?-helical structure that projects three leucine side chains into a groove formed at the interface between two streptavidin protomers. The crystal structure shows that residues 110 and 3538 of the original SBP-Tag identified through in vitro selection and deletion analysis do not appear to contact streptavidin and thus may not be important for binding. A 25-residue peptide comprising residues 1134 (SBP-Tag2) was synthesized and shown using surface plasmon resonance to bind streptavidin with very similar affinity and kinetics when compared with the SBP-Tag. The SBP-Tag2 was also added to the C-terminus of ?-lactamase and was shown to be just as effective as the full-length SBP-Tag in affinity purification. These results validate the molecular structure of the SBP-Tagstreptavidin complex and establish a minimal bivalent streptavidin-binding tag from which further rational design and optimization can proceed.

  20. WhiteOptics' Low-Cost Reflector Composite Boosts LED Fixture Efficiency

    Broader source: Energy.gov [DOE]

    With the help of DOE funding, WhiteOptics has developed a composite coating that can be used to improve efficiency in backlit, indirect, and cavity-mixing LED luminaire designs by maximizing light reflection and output. The highly diffuse coating, which is based on a novel high-reflectance particle technology, allows for uniform distribution of light without exaggerating the point-source nature of the LEDs, and is intended to offer an overall system cost-improving solution for LED optics.

  1. EECBG Success Story: Solar LED Light Pilot Project Illuminates the Way in

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Alabama | Department of Energy Solar LED Light Pilot Project Illuminates the Way in Alabama EECBG Success Story: Solar LED Light Pilot Project Illuminates the Way in Alabama September 12, 2012 - 2:15pm Addthis Boaz, Alabama Mayor Tim Walker, along with state representatives and community leaders, cut the ribbon for the state's solar LED light pilot project. | Photo courtesy of Lionel Green, Sand Mountain Reporter. Boaz, Alabama Mayor Tim Walker, along with state representatives and community

  2. Philips Lumileds Achieves 139 lm/W in a Neutral White LED

    Broader source: Energy.gov [DOE]

    Philips Lumileds' LUXEON Rebel LED can now deliver 139 lm/W in a neutral white LED. The top bin LED, developed with a single InGaN die and phosphor conversion, shows high-performance characteristics up to 139 lm/W and 138 lumens at 350 mA, with a forward voltage of 2.83 V. The CCT of the device is 5385K and the CRI is 70.

  3. How City-Led Efficiency Efforts Can Support State Climate and Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Planning | Department of Energy City-Led Efficiency Efforts Can Support State Climate and Energy Planning How City-Led Efficiency Efforts Can Support State Climate and Energy Planning Provides states and their stakeholders with a short synopsis for what it would look like to include city-led energy efficiency efforts in their climate and energy plans, including current activity at the national and state levels, best practices, energy savings examples, cost-effectiveness, EM&V and DOE

  4. Secretary Chu Announces $38 Million for 42 University-Led Nuclear Research

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Development Projects | Department of Energy 8 Million for 42 University-Led Nuclear Research and Development Projects Secretary Chu Announces $38 Million for 42 University-Led Nuclear Research and Development Projects May 20, 2010 - 12:00am Addthis Washington, D.C. - U.S. Secretary of Energy Steven Chu today announced the selection of 42 university-led research and development projects for awards totaling $38 million. These projects, funded over three to four years through the

  5. EERE Success Story-Improving the Efficiency and Lowering the Cost of LED

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lighting | Department of Energy Improving the Efficiency and Lowering the Cost of LED Lighting EERE Success Story-Improving the Efficiency and Lowering the Cost of LED Lighting July 13, 2016 - 10:30am Addthis Photo Courtesy | Lumileds Photo Courtesy | Lumileds One of the biggest initial barriers to the widespread adoption of energy-efficient light-emitting diodes (LEDs) has been the cost. While considerable progress has been made on that front, further cost reductions will result in even

  6. LED exit signs: Improved technology leads the way to energy savings

    SciTech Connect (OSTI)

    Sardinsky, R.; Hawthorne, S.

    1994-12-31

    Recent innovations in light-emitting diode (LED) exit signs may make LED signs the best choice among the energy efficient options available. In the past, LED signs have offered low power consumption, projected long lamp life, and low maintenance requirements. Now, the best of the LED signs also offer improved optical designs that reduce their already low power consumption while improving visibility and appearance, and even reduce their cost. LED exit signs are gaining market share, and E Source expects this technology to eventually dominate over incandescent, compact fluorescent, and electroluminescent signs. More research is needed, however, to confirm manufacturers` claims of 20-year operating lives for LED signs. Conservative estimates place the number of exit signs in US buildings at about 40 million. Although each sign represents a very small part of a building`s load, exit signs are ready targets for energy efficiency upgrades -- they operate continuously and most use inefficient incandescent sources. With an LED sign, annual energy and maintenance costs can be reduced by more than 90 percent compared to a typical incandescent sign. Low annual costs help to offset the LED sign`s relatively high first cost. More than 25 utilities offer DSM incentives for energy efficient exit signs, and efficient alternatives are becoming more readily available. Recent improvements in optical designs enable many LED signs to visually out perform other sources. In addition to these benefits, LED exit signs have lower life cycle cost than most other options. The biggest barrier to their success, however, is that their first cost has been considerably higher than competing technologies. LED sign prices are falling rapidly, though, because manufacturers are continually improving optical designs of the fixtures to use fewer LEDs and thus even less energy while providing better performance.

  7. Researchers Say They've Solved the Mystery of LED Lighting "Droop"

    Broader source: Energy.gov [DOE]

    Despite being cool, ultra-efficient and long lasting, the light-emitting diode (LED) faces a problem called “efficiency droop.” New findings from simulations carried out at the National Energy Research Scientific Computer Center (NERSC) have unearthed droop’s elusive cause, researchers say, paving the way for wider LED use. An illustration of nitride-based LEDs.| Courtesy of the National Energy Research Scientific Computing Center.

  8. Department of Energy Announces $17 Million to Bolster University-Led

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nuclear Energy Research and Development | Department of Energy $17 Million to Bolster University-Led Nuclear Energy Research and Development Department of Energy Announces $17 Million to Bolster University-Led Nuclear Energy Research and Development September 21, 2011 - 1:39pm Addthis Washington, D.C. - The U.S. Department of Energy today announced that $17 million in research grants will be awarded to 23 university-led teams aimed at strengthening the robust research and development

  9. DOE Science Showcase - Light-emitting Diode (LED) Lighting Research | OSTI,

    Office of Scientific and Technical Information (OSTI)

    US Dept of Energy Office of Scientific and Technical Information Light-emitting Diode (LED) Lighting Research Light-emitting diode (LED) lighting is a type of solid-state lighting that uses a semiconductor to convert electricity to light. LED lighting products are beginning to appear in a wide variety of home, business, and industrial products such as holiday lighting, replacement bulbs for incandescent lamps, street lighting, outdoor area lighting and indoor ambient lighting. Over the past

  10. Zimbabwe-Terms of Reference for Future LEDS | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name Zimbabwe-Terms of Reference for Future LEDS AgencyCompany Organization Climate and Development Knowledge Network (CDKN), United Kingdom...

  11. Report 20.5: Chromaticity Shift Modes of LED PAR38 Lamps Operated in

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Steady-State Conditions | Department of Energy 0.5: Chromaticity Shift Modes of LED PAR38 Lamps Operated in Steady-State Conditions Report 20.5: Chromaticity Shift Modes of LED PAR38 Lamps Operated in Steady-State Conditions Report 20.5: Chromaticity Shift Modes of LED PAR38 Lamps Operated in Steady-State Conditions (8.45 MB) More Documents & Publications MARCH 2016 POSTINGS Retail Lamps Study 3.2: Lumen and Chromaticity Maintenance of LED A Lamps Operated in Steady-State Conditions

  12. Bottom Up and Country Led: A New Framework for Climate Action...

    Open Energy Info (EERE)

    transition strategically to low-carbon economic development while bolstering their resilience to the effects of climate change." References "Bottom Up and Country Led: A New...

  13. In the OSTI Collections: LEDs | OSTI, US Dept of Energy Office...

    Office of Scientific and Technical Information (OSTI)

    ... phosphor; the patent describes bluegreen and greenyellow phosphors for this purpose. ... To fully realize the energy savings of the LEDs, the electronics that drive them must also ...

  14. 2015 DOE SSL R&D Workshop LED Topic Table Questions to Consider

    Broader source: Energy.gov [DOE]

    This document was distributed during the LED Topic Table portion of the DOE SSL R&D Workshop and aimed to prompt discussion on the following topics:

  15. OSTIblog Articles in the LED Topic | OSTI, US Dept of Energy Office of

    Office of Scientific and Technical Information (OSTI)

    Scientific and Technical Information LED Topic Enjoy the benefits of LED lighting by Kathy Chambers 30 Dec, 2013 in Products and Content 13966 Photographic%20credit%E2%80%9CArchitect%20of%20the%20Capitol.%E2%80%9D%202010%20LED%20Tree.jpg Enjoy the benefits of LED lighting Read more about 13966 Every day we are bombarded with advertisements in every form and format telling us that our lives will be improved if we buy a particular product because it will save us money, reduce our work effort,

  16. Salazar, Chu to Flip Switch on Energy-Efficient LED Lights on...

    Energy Savers [EERE]

    "Using energy efficient LED lightbulbs is an important way Americans can save money by saving energy," said Energy Secretary Steven Chu. "Investing in an American economy that is ...

  17. EERE Success Story-LED Lighting in the Classroom for Energy Efficiency...

    Energy Savers [EERE]

    easily controllable, because it's based on semiconductors rather than on filaments, plasma, or gas. "In addition to demonstrating the excellent efficiency of LED lighting ...

  18. Sandia-Developed LED Pulser Delivers Laser-Like Performance at...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Frontier Research Centers: Solid-State Lighting Science Center for Frontiers of ... diode (LED) driver delivers lighting performance that exceeds that of ...

  19. LED Linear Lamps and Troffer Lighting: CALiPER Report Series 21

    SciTech Connect (OSTI)

    Beeson, Tracy; Miller, Naomi

    2014-06-17

    Video about CALiPER Report Series 21 on LED Linear Lamps and Troffer Lighting, featuring interviews with Tracy Beeson and Naomi Miller of Pacific Northwest National Laboratory.

  20. Demonstration Assessment of LED Roadway Lighting: NE Cully Blvd., Portland, OR

    SciTech Connect (OSTI)

    Royer, M. P.; Poplawski, M. E.; Tuenge, J. R.

    2012-08-01

    GATEWAY program report on a demonstration of LED roadway lighting on NE Cully Boulevard in Portland, OR, a residential collector road.

  1. CALiPER Benchmark Report: Performance of Incandescent A Type and Decorative Lamps and LED Replacements

    SciTech Connect (OSTI)

    Lingard, R. D.; Myer, M. A.; Paget, M. L.

    2008-11-01

    This benchmark report addresses common omnidirectional incandescent lamps - A-type and small decorative, candelabra-type lamps - and their commercially available light-emitting diode (LED) replacements.

  2. Text Alternative Version: Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products" webcast, held March 28, 2013.

  3. DOE Publishes GATEWAY Report on High-Luminous-Flux LED Lighting in a

    Energy Savers [EERE]

    | Department of Energy Chromaticity Shift Modes of LED PAR38 Lamps DOE Publishes CALiPER Report on Chromaticity Shift Modes of LED PAR38 Lamps March 23, 2016 - 11:33am Addthis The U.S. Department of Energy's CALiPER program has released Report 20.5, which is part of a series of investigations on LED PAR38 lamps. The new report builds on CALiPER Report 20.4 by providing a tear-down analysis of its 32 LED PAR38 lamp models and also performing additional analyses on the spectroradiometric data

  4. Text-Alternative Version: CALiPER Series 21 on LED Linear Lamps and Troffer Lighting

    Broader source: Energy.gov [DOE]

    Following is a text version of a video about CALiPER Application Report Series 21 on LED Linear Lamps and Troffer Lighting.

  5. Enhancing the Output of LED Lighting | U.S. DOE Office of Science...

    Office of Science (SC) Website

    market penetration as sources of lighting in both residential and commercial applications. ... the LED. Researchers at the Center for Energy Efficient Materials EFRC at University of ...

  6. Hydrogen Storage Lab PI Workshop: HyMARC and NREL-Led Characterization...

    Office of Environmental Management (EM)

    Effort Hydrogen Storage Lab PI Workshop: HyMARC and NREL-Led Characterization Effort The National Renewable Energy Laboratory (NREL) hosted a Hydrogen Storage Lab ...

  7. LED System Performance in a Trial Installation … Two Years Later

    Energy Savers [EERE]

    ... Documentation of the Yuma Sector Border Patrol Area lighting LED trial demonstration ... as an investment grade audit (IGA) trial demonstration of the proposed design solution. ...

  8. Text-Alternative Version: MSSLC Member Case Studies- LED Street Lighting Programs Webinar

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "MSSLC Member Case Studies - LED Street Lighting Programs" webcast, held May 8, 2013.

  9. Development and Industrialization of InGaN/GaN LEDs on Patterned...

    Energy Savers [EERE]

    ...2013 - 11302015 Funding Opportunity: SSL Manufacturing R&D Funding Opportunity Announcement (FOA) DE-FOA-000079 Project Objective The objective of this project is to reduce LED ...

  10. Demonstration Assessment of Light-Emitting Diode (LED) Post-Top...

    Office of Scientific and Technical Information (OSTI)

    This report reviews the energy savings potential and lighting delivered by the LED post-top luminaires. Authors: Myer, Michael ; Goettel, Russell T. ; Kinzey, Bruce R. Publication ...

  11. Text-Alternative Version: LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR®

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR® webcast.

  12. DOE Publishes CALiPER Report on Chromaticity Shift Modes of LED PAR38 Lamps

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Chromaticity Shift Modes of LED PAR38 Lamps DOE Publishes CALiPER Report on Chromaticity Shift Modes of LED PAR38 Lamps March 23, 2016 - 11:33am Addthis The U.S. Department of Energy's CALiPER program has released Report 20.5, which is part of a series of investigations on LED PAR38 lamps. The new report builds on CALiPER Report 20.4 by providing a tear-down analysis of its 32 LED PAR38 lamp models and also performing additional analyses on the spectroradiometric data

  13. DOE Publishes CALiPER Snapshot Report on Indoor LED Luminaires | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Indoor LED Luminaires DOE Publishes CALiPER Snapshot Report on Indoor LED Luminaires June 5, 2014 - 10:56am Addthis The U.S. Department of Energy's CALiPER program has released a Snapshot Report on indoor LED luminaires, which utilizes the LED Lighting Facts® program's extensive product database to help industry stakeholders understand the current state and trajectory of the market for that class of products. Based on data through the first quarter of 2014, the report focuses on

  14. DOE Publishes CALiPER Snapshot Report on LED Outdoor Area Lighting |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy LED Outdoor Area Lighting DOE Publishes CALiPER Snapshot Report on LED Outdoor Area Lighting July 22, 2014 - 10:11am Addthis The U.S. Department of Energy's CALiPER program has released a Snapshot Report on LED outdoor area lighting. Based on LED Lighting Facts® data through the second quarter of 2014, the report focuses on outdoor area/roadway luminaires, parking garage luminaires, canopy luminaires, and outdoor directional luminaires. As of July 1, 2014, area/roadway

  15. Energy Department Invests Nearly $2 Million in Small Business-Led Building Technology Projects

    Broader source: Energy.gov [DOE]

    The Department of Energy recently announced nearly $2 million for 13 new building technology projects led by small businesses with a strong potential for commercialization and job creation.

  16. LED Linear Lamps and Troffer Lighting: CALiPER Report Series 21

    ScienceCinema (OSTI)

    Beeson, Tracy; Miller, Naomi

    2014-06-23

    Video about CALiPER Report Series 21 on LED Linear Lamps and Troffer Lighting, featuring interviews with Tracy Beeson and Naomi Miller of Pacific Northwest National Laboratory.

  17. Secretary Chu Announces $38 Million for 42 University-Led Nuclear Research and Development Projects

    Office of Energy Efficiency and Renewable Energy (EERE)

    U.S. Secretary of Energy Steven Chu today announced the selection of 42 university-led research and development projects for awards totaling $38 million.

  18. Scalable Light Module for Low-Cost, High Efficiency LED Luminaires

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Mechanical stability with minimal BOM 6 Progress and Accomplishments LEDs: higher ... have been presented at recent DOE SSL Manufacturing and R&D Workshops Project Integration ...

  19. Demonstration Assessment of Light-Emitting Diode (LED) Area Lights for a Commercial Garage

    SciTech Connect (OSTI)

    2008-11-01

    This U.S. Department of Energy GATEWAY Demonstration project studied the applicability of light-emitting diode (LED) luminaires for commercial parking garage applications.

  20. Quantitative NO{sub 2} molecular tagging velocimetry at 500 kHz frame rate

    SciTech Connect (OSTI)

    Jiang, Naibo; Nishihara, Munetake; Lempert, Walter R.

    2010-11-29

    NO{sub 2} molecular tagging velocimetry (MTV) is demonstrated at repetition rates as high as 500 kHz in a laboratory scale Mach 5 wind tunnel. A pulse burst laser and a home built optical parametric oscillator system were used to simultaneously generate the required 355 and 226 nm wavelengths for NO{sub 2} photodissociation (tagging) and NO planar laser induced fluorescence imaging (interrogation), respectively. NO{sub 2} MTV images were obtained both in front and behind the characteristic bow shock from a 5 mm diameter cylinder. From Gaussian curve fitting, an average free stream flow velocity of 719 m/s was obtained. Absolute statistical precision in velocity of {approx}11.5 m/s was determined, corresponding to relative precision of 1.6%-5%, depending upon the region of the flow probed.

  1. An Integrated RFID and Barcode Tagged Item Inventory System for Deployment at New Brunswick Laboratory

    SciTech Connect (OSTI)

    Younkin, James R; Kuhn, Michael J; Gradle, Colleen; Preston, Lynne; Thomas, Brigham B.; Laymance, Leesa K; Kuziel, Ron

    2012-01-01

    New Brunswick Laboratory (NBL) has a numerous inventory containing thousands of plutonium and uranium certified reference materials. The current manual inventory process is well established but is a lengthy process which requires significant oversight and double checking to ensure correctness. Oak Ridge National Laboratory has worked with NBL to develop and deploy a new inventory system which utilizes handheld computers with barcode scanners and radio frequency identification (RFID) readers termed the Tagged Item Inventory System (TIIS). Certified reference materials are identified by labels which incorporate RFID tags and barcodes. The label printing process and RFID tag association process are integrated into the main desktop software application. Software on the handheld computers syncs with software on designated desktop machines and the NBL inventory database to provide a seamless inventory process. This process includes: 1) identifying items to be inventoried, 2) downloading the current inventory information to the handheld computer, 3) using the handheld to read item and location labels, and 4) syncing the handheld computer with a designated desktop machine to analyze the results, print reports, etc. The security of this inventory software has been a major concern. Designated roles linked to authenticated logins are used to control access to the desktop software while password protection and badge verification are used to control access to the handheld computers. The overall system design and deployment at NBL will be presented. The performance of the system will also be discussed with respect to a small piece of the overall inventory. Future work includes performing a full inventory at NBL with the Tagged Item Inventory System and comparing performance, cost, and radiation exposures to the current manual inventory process.

  2. Tagging CO2 to Enable Quantitative Inventories of Geological Carbon Storage

    SciTech Connect (OSTI)

    Lackner, Klaus; Matter, Juerg; Park, Ah-Hyung; Stute, Martin; Carson, Cantwell; Ji, Yinghuang

    2014-06-30

    In the wake of concerns about the long term integrity and containment of sub-surface CO2 sequestration reservoirs, many efforts have been made to improve the monitoring, verification, and accounting methods for geo-sequestered CO2. Our project aimed to demonstrate the feasibility of a system designed to tag CO2 with carbon isotope 14C immediately prior to sequestration to a level that is normal on the surface (one part per trillion). Because carbon found at depth is naturally free of 14C, this tag would easily differentiate pre-existing carbon from anthropogenic injected carbon and provide an excellent handle for monitoring its whereabouts in the subsurface. It also creates an excellent handle for adding up anthropogenic carbon inventories. Future inventories in effect count 14C atoms. Accordingly, we have developed a 14C tagging system suitable for use at the part-per-trillion level. This system consists of a gas-exchange apparatus to make disposable cartridges ready for controlled injection into a fast flowing stream of pressurized CO2. We built a high-pressure injection and tagging system, and a 14C detection system. The disposable cartridge and injection system have been successfully demonstrated in the lab with a high-pressure flow reactor, as well as in the field at the CarbFix CO2 sequestration site in Iceland. The laser-based 14C detection system originally conceived has been shown to possess inadequate sensitivity for ambient levels. Alternative methods for detecting 14C, such as saturated cavity absorption ringdown spectroscopy and scintillation counting, may still be suitable. KEYWORDS

  3. A Study to Determine the Biological Feasibility of a New Fish-Tagging System : Annual Report 1998-1999.

    SciTech Connect (OSTI)

    Downing, Sandra L.; Prentice, Earl F.; Peterson, Bradley W.; Nunnallee, Edmund P.; Jonasson, Bruce F.

    2000-09-01

    This report covers our work during 1998 and 1999 (FY99) on a project to expand and improve technology for passive-integrated-transponder tags (PIT tags) throughout the Columbia River Basin. The National Marine Fisheries Service (NMFS) in cooperation with the Bonneville Power Administration (BPA) conducted the work. Timely and accurate information derived from PIT-tag technology is increasingly critical to resource stakeholders in assessing the effectiveness of efforts to enhance survival of juvenile and adult salmonids. Continued development of PIT-tag technology will enable researchers and fisheries managers to address issues expressed in the NMFS biological opinions for operation of the Federal Columbia River Power System (FCRPS) and the proposed Snake River Recovery Plan. The FY99 work was divided into individual projects that are covered separately in this report.

  4. Top quark pair production cross section in the lepton+jets channel using b-tagging at D0

    SciTech Connect (OSTI)

    Yoo, H.D.; /Brown U.

    2008-05-01

    The top quark pair production cross section measurement in the lepton+jets channel with b-tagging algorithm is described. About 900 pb{sup -1} data collected by the D0 detector at the Fermilab Tevatron are used for this analysis. In this thesis, event selection, background estimation, and cross section calculation are discussed in detail. In addition, calibration of the Luminosity Monitor readout electronics and a new b-tagging algorithm, the SLTNN tagger, are also discussed in this thesis.

  5. Study to Determine the Biological Feasibility of a New Fish Tagging System, 1998-2000 Progress Report.

    SciTech Connect (OSTI)

    Downing, Sandra L.

    2001-05-01

    Since 1984, the National Marine Fisheries Service (NMFS) in cooperation with the Bonneville Power Administration (BPA) has conducted an ongoing research and development project to expand and improve technology for Passive-Integrated-Transponder tags (PIT tags) throughout the Columbia River Basin (CRB). Work conducted as part of this project during 1999-2000 was divided into six individual projects, which are covered separately in this report.

  6. TRUE COLORS: LEDS AND THE RELATIONSHIP BETWEEN CCT, CRI, OPTICAL SAFETY, MATERIAL DEGRADATION, AND PHOTOBIOLOGICAL STIMULATION

    SciTech Connect (OSTI)

    Royer, Michael P.

    2014-08-30

    This document analyzes the optical, material, and photobiological hazards of LED light sources compared to conventional light sources. It documents that LEDs generally produce the same amount of blue light, which is the primary contributor to the risks, as other sources at the same CCT. Duv may have some effect on the amount of blue light, but CRI does not.

  7. The evolving price of household LED lamps: Recent trends and historical comparisons for the US market

    SciTech Connect (OSTI)

    Gerke, Brian F.; Ngo, Allison T.; Alstone, Andrea L.; Fisseha, Kibret S.

    2014-10-14

    In recent years, household LED light bulbs (LED A lamps) have undergone a dramatic price decline. Since late 2011, we have been collecting data, on a weekly basis, for retail offerings of LED A lamps on the Internet. The resulting data set allows us to track the recent price decline in detail. LED A lamp prices declined roughly exponentially with time in 2011-2014, with decline rates of 28percent to 44percent per year depending on lumen output, and with higher-lumen lamps exhibiting more rapid price declines. By combining the Internet price data with publicly available lamp shipments indices for the US market, it is also possible to correlate LED A lamp prices against cumulative production, yielding an experience curve for LED A lamps. In 2012-2013, LED A lamp prices declined by 20-25percent for each doubling in cumulative shipments. Similar analysis of historical data for other lighting technologies reveals that LED prices have fallen significantly more rapidly with cumulative production than did their technological predecessors, which exhibited a historical decline of 14-15percent per doubling of production.

  8. Largest-area Photonic Crystal LED Fabricated Demonstrates Uniform Light Emission

    Office of Energy Efficiency and Renewable Energy (EERE)

    Lumileds Lighting, the University of New Mexico, and Sandia National Laboratories teamed to demonstrate uniform light emission from the largest-area III-Nitride photonic crystal LED (1 x 1 mm2) ever fabricated. Most previous photonic crystal LED research has relied on small-area patterns written by slow, serial-writing electron-beam lithography.

  9. Cree's High-Power White LED Delivers 121 lm/W

    Broader source: Energy.gov [DOE]

    Cree's commercial high-power white LEDs can now deliver 121 lm/W at 35A/cm2 current density. These particular Cree XLamp® XP-G LEDs deliver 267 lumens at a drive current of 700 mA and an operating...

  10. CALiPER Application Summary Report 16. LED BR30 and R30 Lamps

    SciTech Connect (OSTI)

    none,

    2012-07-01

    This report analyzes the independently tested performance of 13 LED products labeled as BR30 or R30 lamps. The test results indicate substantial improvement versus earlier CALiPER testing of similar products, and performance comparable to recent data from LED Lighting Facts and ENERGY STAR.

  11. CALiPER Application Summary Report 17. LED AR111 and PAR36 Lamps

    SciTech Connect (OSTI)

    none,

    2012-08-01

    Report 17 analyzes the performance of a group of six LED products labeled as AR111 lamps. Results indicate that this product category lags behind other types of directional LED lamps but may perform acceptably in some applications and provide some energy savings.

  12. Enhanced light extraction in tunnel junction-enabled top emitting UV LEDs

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhang, Yuewei; Allerman, Andrew A.; Krishnamoorthy, Sriram; Akyol, Fatih; Moseley, Michael W.; Armstrong, Andrew M.; Rajan, Siddharth

    2016-04-11

    The efficiency of ultra violet LEDs has been critically limited by the absorption losses in p-type and metal layers. In this work, surface roughening based light extraction structures are combined with tunneling based p-contacts to realize highly efficient top-side light extraction efficiency in UV LEDs. Surface roughening of the top n-type AlGaN contact layer is demonstrated using self-assembled Ni nano-clusters as etch mask. The top surface roughened LEDs were found to enhance external quantum efficiency by over 40% for UV LEDs with a peak emission wavelength of 326 nm. The method described here can enable highly efficient UV LEDs withoutmore » the need for complex manufacturing methods such as flip chip bonding.« less

  13. Magical Mystery Devices or Not: How do LED Lamps and Luminaires Really Measure-Up?

    SciTech Connect (OSTI)

    Paget, Maria L.; McCullough, Jeffrey J.; Steward, Heidi E.

    2008-08-15

    Solid-state lighting products for general lighting applications are now gaining a market presence, and more and more people are asking, “Which of these are ‘good’ products? Do they perform as claimed? How do they compare? Light Emitting Diodes (LEDs) differ from other light sources enough to require new procedures for measuring their performance and comparing to other lighting options, so both manufacturers and buyers are facing a learning curve. The energy-efficiency community has traditionally compared light sources based on system efficacy: rated lamp lumens divided by power into the system. This doesn’t work for LEDs because there are no standard LED “lamp” packages and no lamp ratings, and because LED performance depends heavily on thermal, electrical, and optical design of complete lighting unit or ‘luminaire’. Luminaire efficacy is the preferred metric for LEDs because it measures the net light output from the luminaire divided by power into the system.

  14. An Efficient LED System-in-Module for General Lighting Applications

    SciTech Connect (OSTI)

    2008-09-14

    The objective of the project was to realize an LED-based lighting technology platform for general illumination, starting with LED chips, and integrating the necessary technologies to make compact, user-friendly, high-efficiency, energy-saving sources of controlled white (or variable-colored) light. The project is to build the system around the LEDs, and not to work on the LEDs themselves, in order that working products can be introduced soon after the LEDs reach suitable efficiency for mass-production of high-power light sources for general illumination. Because the light sources are intended for general illumination, color must be accurately maintained, requiring feedback control in the electronics. The project objective has been realized and screw base demonstrators, based on the technology developed in the project, have been built.

  15. Vapochromic LED

    DOE Patents [OSTI]

    Kunugi, Yoshihito; Mann, Kent R.; Miller, Larry L.; Exstrom, Christopher L.

    2002-01-15

    A sandwich device was prepared by electrodeposition of an insoluble layer of oligomerized tris(4-(2-thienyl)phenyl)amine onto conducting indium-tin oxide coated glass, spin coating the stacked platinum compound, tetrakis(p-decylphenylisocyano)platinum tetranitroplatinate, from toluene onto the oligomer layer, and then coating the platinum complex with aluminum by vapor deposition. This device showed rectification of current and gave electroluminescence. The electroluminescence spectrum (.mu..sub.max =545 nm) corresponded to the photoluminescence spectrum of the platinum complex. Exposure of the device to acetone vapor caused the electroemission to shift to 575 nm. Exposure to toluene vapor caused a return to the original spectrum. These results demonstrate a new type of sensor that reports the arrival of organic vapors with an electroluminescent signal. The sensor comprises (a) a first electrode; (b) a hole transport layer formed on the first electrode; (c) a sensing/emitting layer formed on the hole transport layer, the sensing/emitting layer comprising a material that changes color upon exposure to the analyte vapors; (d) an electron conductor layer formed on the sensing layer; and (e) a second electrode formed on the electron conductor layer. The hole transport layer emits light at a shorter wavelength than the sensing/emitting layer and at least the first electrode comprises an optically transparent material.

  16. Vapochromic LED

    DOE Patents [OSTI]

    Kunugi, Yoshihito; Mann, Kent R.; Miller, Larry L.; Exstrom, Christopher L.

    2003-06-17

    A sandwich device was prepared by electrodeposition of an insoluble layer of oligomerized tris(4-(2-thienyl)phenyl)amine onto conducting indium-tin oxide coated glass, spin coating the stacked platinum compound, tetrakis(p-decylphenylisocyano)platinum tetranitroplatinate, from toluene onto the oligomer layer, and then coating the platinum complex with aluminum by vapor deposition. This device showed rectification of current and gave electroluminescence. The electroluminescence spectrum (.lambda..sub.max =545 nm) corresponded to the photoluminescence spectrum of the platinum complex. Exposure of the device to acetone vapor caused the electroemission to shift to 575 nm. Exposure to toluene vapor caused a return to the original spectrum. These results demonstrate a new type of sensor that reports the arrival of organic vapors with an electroluminescent signal. The sensor comprises (a) a first electrode; (b) a hole transport layer formed on the first electrode; (c) a sensing/emitting layer formed on the hole transport layer, the sensing/emitting layer comprising a material that changes color upon exposure to the analyte vapors; (d) an electron conductor layer formed on the sensing layer; and (e) a second electrode formed on the electron conductor layer. The hole transport layer emits light at a shorter wavelength than the sensing/emitting layer and at least the first electrode comprises an optically transparent material.

  17. Tag: partnership

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    newspress-releasescns-research-teams-named-2015-rd-100-award-finalists

  18. Tag: technologies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    newspress-releasescns-research-teams-named-2015-rd-100-award-finalists

  19. Tag: community

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    able to serve a record breaking 2,808 children, providing necessary school supplies to students in 29 area schools in a 345-square-mile service area.

  20. Tag: engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    24all en CNS employees blaze through certification exam http:www.y12.doe.govemployees-retireescns-employees-blaze-through-certification-exam