Powered by Deep Web Technologies
Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Development of an Integrated Multi-Contaminant Removal Process Applied to Warm Syngas Cleanup  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Gasification Gasification Technologies contacts Gary J. stiegel Gasification Technology Manager National Energy Technology Laboratory 626 Cochrans Mill Road P.O. Box 10940 Pittsburgh, PA 15236 412-386-4499 gary.stiegel@netl.doe.gov Jenny tennant Project Manager National Energy Technology Laboratory 3610 Collins Ferry Road P.O. Box 880 Morgantown, WV 26507 304-285-4830 jenny.tennant@netl.doe.gov Howard Meyer Principal Project Manager Gas Technology Institute 1700 South Mount Prospect Road Des Plaines, IL 60018 847-768-0955 howard.meyer@gastechnology.org Development of an IntegrateD multI-ContamInant removal proCess applIeD to Warm syngas Cleanup Description The U.S. has more coal than any other country, and through gasification this coal can be converted into electricity, liquid fuels, chemicals or hydrogen. However,

2

Development of an Integrated Multicontaminant Removal Process Applied to Warm Syngas Cleanup for Coal-Based Advanced Gasification Systems  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

an Integrated an Integrated Multicontaminant Removal Process Applied to Warm Syngas Cleanup for Coal-Based Advanced Gasification Systems Background The U.S. has more coal than any other country, and it can be converted through gasification into electricity, liquid fuels, chemicals, or hydrogen. However, for coal gasification to become sufficiently competitive to benefit the U.S. economy and help reduce our dependence on foreign fuels, gasification costs must be reduced

3

Pyrolysis of Mixed Plastic Wastes for the Recovery of Benzene, Toluene, and Xylene (BTX) Aromatics in a Fluidized Bed and Chlorine Removal by Applying Various Additives  

Science Journals Connector (OSTI)

It seems that the char removal system, which was composed of a cyclone and a hot filter, almost perfectly removed the char particles. ... To absorb the hydrogen chloride that was formed from the degradation of the polyvinyl chloride (PVC) in the mixed plastic wastes, additives (calcium oxide, calcium hydroxide, crushed oyster shells, and rice straw) were added to a fraction of the mixed plastic wastes. ... For different additives, different Ca/Cl ratios should be chosen based on the cost, HCl removal efficiency and utilization efficiency of additive. ...

Min-Hwan Cho; Su-Hwa Jung; Joo-Sik Kim

2009-12-15T23:59:59.000Z

4

Ukraine HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Apply for Our Jobs Our Jobs Working at NNSA Blog Home content Four-Year Plan Ukraine HEU Removal Ukraine HEU Removal Location Ukraine United States 50 12' 24.8688" N,...

5

Japan HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Jobs Apply for Our Jobs Our Jobs Working at NNSA Blog Home content Four-Year Plan Japan HEU Removal Japan HEU Removal Location Japan United States 37 36' 59.5872" N, 140...

6

APPLIED PHYSICS APPLIED PHYSICS  

E-Print Network [OSTI]

MSc APPLIED PHYSICS #12;MSc APPLIED PHYSICS This taught Masters course is based on the strong research in Applied Physics in the University's Department of Physics. The department has an impressive photonics and quantum optics, Physics and the Life Sciences, and solid state physics. The knowledge gained

Mottram, Nigel

7

Ozone removal by HVAC filters  

Science Journals Connector (OSTI)

Residential and commercial HVAC filters that have been loaded with particles during operation in the field can remove ozone from intake or recirculated air. However, knowledge of the relative importance of HVAC filters as a removal mechanism for ozone in residential and commercial buildings is incomplete. We measured the ozone removal efficiencies of clean (unused) fiberglass, clean synthetic filters, and field-loaded residential and commercial filters in a controlled laboratory setting. For most filters, the ozone removal efficiency declined rapidly but converged to a non-zero (steady-state) value. This steady-state ozone removal efficiency varied from 0% to 9% for clean filters. The mean steady-state ozone removal efficiencies for loaded residential and commercial filters were 10% and 41%, respectively. Repeated exposure of filters to ozone following a 24-h period of no exposure led to a regeneration of ozone removal efficiency. Based on a theoretical scaling analysis of mechanisms that are involved in the ozone removal process, we speculate that the steady-state ozone removal efficiency is limited by reactant diffusion out of particles, and that regeneration is due to internal diffusion of reactive species to sites available to ozone for reaction. Finally, by applying our results to a screening model for typical residential and commercial buildings, HVAC filters were estimated to contribute 22% and 95%, respectively, of total ozone removal in HVAC systems.

P. Zhao; J.A. Siegel; R.L. Corsi

2007-01-01T23:59:59.000Z

8

Silica Scaling Removal Process  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Silica Scaling Removal Process Silica Scaling Removal Process Scientists at Los Alamos National Laboratory have developed a novel technology to remove both dissolved and colloidal...

9

Technologies for Boron Removal  

Science Journals Connector (OSTI)

Tests were performed to examine the removal of boron from aqueous solution either with polyvinyl alcohol (PVA) alone or by both PVA and other inorganic additives under room temperature. ... Added calcium hydroxide increased the co-removal of borate with PVA, and this offers a polishing treatment after borate removal by liming. ... As boron removal can be achieved by chemical precipitation and coagulation, it is logical to assume that the EC could remove boron from water and industrial effluent. ...

Yonglan Xu; Jia-Qian Jiang

2007-11-23T23:59:59.000Z

10

TMI-2 reactor vessel head removal  

SciTech Connect (OSTI)

This report describes the safe removal and storage of the Three Mile Island Unit 2 reactor vessel head. The head was removed in July 1984 to permit the removal of the plenum and the reactor core, which were damaged during the 1979 accident. From July 1982, plans and preparations were made using a standard head removal procedure modified by the necessary precautions and changes to account for conditions caused by the accident. After data acquisition, equipment and structure modifications, and training the head was safely removed and stored and the internals indexing fixture and a work platform were installed on top of the vessel. Dose rates during and after the operation were lower than expected; lessons were learned from the operation which will be applied to the continuing fuel removal operations activities.

Bengel, P.R.; Smith, M.D.; Estabrook, G.A.

1984-12-01T23:59:59.000Z

11

TMI-2 reactor vessel head removal  

SciTech Connect (OSTI)

This report describes the safe removal and storage of the Three Mile Island Unit 2 (TMI-2) reactor vessel head. The head was removed in July 1984 to permit the removal of the plenum and the reactor core, which were damaged during the 1979 accident. From July 1982, plans and preparations were made using a standard head removal procedure modified by the necessary precautions and changes to account for conditions caused by the accident. After data acquisition, equipment and structure modifications, and training, the head was safely removed and stored; and the internals indexing fixture and a work platform were installed on top of the vessel. Dose rates during and after the operation were lower than expected; lessons were learned from the operation which will be applied to the continuing fuel removal operations activities.

Bengel, P.R.; Smith, M.D.; Estabrook, G.A.

1985-09-01T23:59:59.000Z

12

Turbomachinery debris remover  

DOE Patents [OSTI]

An apparatus for removing debris from a turbomachine. The apparatus includes housing and remotely operable viewing and grappling mechanisms for the purpose of locating and removing debris lodged between adjacent blades in a turbomachine.

Krawiec, Donald F. (Pittsburgh, PA); Kraf, Robert J. (North Huntingdon, PA); Houser, Robert J. (Monroeville, PA)

1988-01-01T23:59:59.000Z

13

Risk Removal | Department of Energy  

Energy Savers [EERE]

Risk Removal Risk Removal Workers safely remove old mercury tanks from the Y-12 National Security Complex. Workers safely remove old mercury tanks from the Y-12 National Security...

14

CX-010834: Categorical Exclusion Determination | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Exclusion Determination CX-010834: Categorical Exclusion Determination 704-L Machine Shop Equipment Removal CX(s) Applied: B1.24 Date: 08012013 Location(s): South...

15

CX-003037: Categorical Exclusion Determination | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Determination CX-003037: Categorical Exclusion Determination Mercury Removal from Clean Coal Processing Air Stream CX(s) Applied: B3.6 Date: 07132010 Location(s): Butte,...

16

CX-007625: Categorical Exclusion Determination | Department of...  

Broader source: Energy.gov (indexed) [DOE]

CX-007625: Categorical Exclusion Determination Flush Fire Water Distribution Lines to Remove Sediment CX(s) Applied: B1.3 Date: 01242012 Location(s): South Carolina...

17

CX-002645: Categorical Exclusion Determination | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Categorical Exclusion Determination CX-002645: Categorical Exclusion Determination Fine Coal Flotation and Removal of Toxic Trace Elements CX(s) Applied: B3.6 Date: 06042010...

18

CX-007641: Categorical Exclusion Determination | Department of...  

Broader source: Energy.gov (indexed) [DOE]

41: Categorical Exclusion Determination CX-007641: Categorical Exclusion Determination Heat Exchanger Removal and Disposition CX(s) Applied: B1.23 Date: 01182012 Location(s):...

19

CX-007671: Categorical Exclusion Determination | Department of...  

Broader source: Energy.gov (indexed) [DOE]

71: Categorical Exclusion Determination CX-007671: Categorical Exclusion Determination "Heat Exchanger Removal and Disposition CX(s) Applied: B6.1 Date: 11072011 Location(s):...

20

Laser-based coatings removal  

SciTech Connect (OSTI)

Over the years as building and equipment surfaces became contaminated with low levels of uranium or plutonium dust, coats of paint were applied to stabilize the contaminants in place. Most of the earlier paint used was lead-based paint. More recently, various non-lead-based paints, such as two-part epoxy, are used. For D & D (decontamination and decommissioning), it is desirable to remove the paints or other coatings rather than having to tear down and dispose of the entire building.

Freiwald, J.G.; Freiwald, D.

1995-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Silica Scaling Removal Process  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Silica Scaling Removal Process Silica Scaling Removal Process Silica Scaling Removal Process Scientists at Los Alamos National Laboratory have developed a novel technology to remove both dissolved and colloidal silica using small gel particles. Available for thumbnail of Feynman Center (505) 665-9090 Email Silica Scaling Removal Process Applications: Cooling tower systems Water treatment systems Water evaporation systems Potential mining applications (produced water) Industry applications for which silica scaling must be prevented Benefits: Reduces scaling in cooling towers by up to 50% Increases the number of cycles of concentration substantially Reduces the amount of antiscaling chemical additives needed Decreases the amount of makeup water and subsequent discharged water (blowdown) Enables considerable cost savings derived from reductions in

22

Hungary HEU removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

removal | National Nuclear Security Administration removal | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > content > Four-Year Plan > Hungary HEU removal Hungary HEU removal Location Hungary United States 47° 11' 51.6336" N, 19° 41' 15" E See map: Google Maps Printer-friendly version Printer-friendly version Javascript is required to view this map.

23

Mexico HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Removal | National Nuclear Security Administration Removal | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > content > Four-Year Plan > Mexico HEU Removal Mexico HEU Removal Location Mexico United States 24° 24' 35.298" N, 102° 49' 55.3116" W See map: Google Maps Printer-friendly version Printer-friendly version Javascript is required to view this map.

24

Kazakhstan HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Kazakhstan HEU Removal | National Nuclear Security Administration Kazakhstan HEU Removal | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > content > Four-Year Plan > Kazakhstan HEU Removal Kazakhstan HEU Removal Location Kazakhstan United States 48° 59' 44.1492" N, 67° 3' 37.9692" E See map: Google Maps Printer-friendly version Printer-friendly version

25

Sweden Plutonium Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Sweden Plutonium Removal | National Nuclear Security Administration Sweden Plutonium Removal | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > content > Four-Year Plan > Sweden Plutonium Removal Sweden Plutonium Removal Location Sweden United States 62° 24' 4.4136" N, 15° 22' 51.096" E See map: Google Maps Printer-friendly version Printer-friendly version

26

Turkey HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Turkey HEU Removal | National Nuclear Security Administration Turkey HEU Removal | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > content > Four-Year Plan > Turkey HEU Removal Turkey HEU Removal Location Turkey United States 38° 26' 50.2044" N, 40° 15' 14.0616" E See map: Google Maps Printer-friendly version Printer-friendly version

27

Continuous sulfur removal process  

DOE Patents [OSTI]

A continuous process for the removal of hydrogen sulfide from a gas stream using a membrane comprising a metal oxide deposited on a porous support is disclosed. 4 figures.

Jalan, V.; Ryu, J.

1994-04-26T23:59:59.000Z

28

Applied Science  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Applied Science Applied Science Correlation of predicted and measured iron oxidation states in mixed iron oxides H. D. Rosenfeld and W. L. Holstein Development of a quantitative measurement of a diesel spray core using synchrotron x-rays C.F. Powell, Y. Yue, S. Gupta, A. McPherson, R. Poola, and J. Wang Localized phase transformations by x-ray-induced heating R.A. Rosenberg, Q. Ma, W. Farrell, E.D. Crozier, G.J. Soerensen, R.A. Gordon, and D.-T. Jiang Resonant x-ray scattering at the Se edge in ferroelectric liquid crystal materials L. Matkin, H. Gleeson, R. Pindak, P. Mach, C. Huang, G. Srajer, and J. Pollmann Synchrotron-radiation-induced anisotropic wet etching of GaAs Q. Ma, D.C. Mancini, and R.A. Rosenberg Synchrotron-radiation-induced, selective-area deposition of gold on

29

Drum lid removal tool  

DOE Patents [OSTI]

A tool for removing the lid of a metal drum wherein the lid is clamped over the drum rim without protruding edges, the tool having an elongated handle with a blade carried by an angularly positioned holder affixed to the midsection of the handle, the blade being of selected width to slice between lid lip and the drum rim and, when the blade is so positioned, upward motion of the blade handle will cause the blade to pry the lip from the rim and allow the lid to be removed.

Pella, Bernard M. (Martinez, GA); Smith, Philip D. (North Augusta, SC)

2010-08-24T23:59:59.000Z

30

Condensate removal device  

DOE Patents [OSTI]

A condensate removal device is disclosed which incorporates a strainer in unit with an orifice. The strainer is cylindrical with its longitudinal axis transverse to that of the vapor conduit in which it is mounted. The orifice is positioned inside the strainer proximate the end which is remoter from the vapor conduit.

Maddox, James W. (Newport News, VA); Berger, David D. (Alexandria, VA)

1984-01-01T23:59:59.000Z

31

GTRI: Removing Vulnerable Civilian Nuclear and Radiological Material |  

National Nuclear Security Administration (NNSA)

Removing Vulnerable Civilian Nuclear and Radiological Material | Removing Vulnerable Civilian Nuclear and Radiological Material | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > Media Room > Fact Sheets > GTRI: Removing Vulnerable Civilian Nuclear and Radiological Material Fact Sheet GTRI: Removing Vulnerable Civilian Nuclear and Radiological Material

32

GTRI: Removing Vulnerable Civilian Nuclear and Radiological Material |  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Removing Vulnerable Civilian Nuclear and Radiological Material | Removing Vulnerable Civilian Nuclear and Radiological Material | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > Media Room > Fact Sheets > GTRI: Removing Vulnerable Civilian Nuclear and Radiological Material Fact Sheet GTRI: Removing Vulnerable Civilian Nuclear and Radiological Material

33

DOE Removes Brookhaven Contractor  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DOE Removes DOE Removes Brookhaven Contractor Peña sends a message to DOE facilities nationwide INSIDE 2 Accelerator Rx 4 FermiKids 6 Spring at Fermilab Photos courtesy of Brookhaven National Laboratory by Judy Jackson, Office of Public Affairs Secretary of Energy Federico Peña announced on Thursday, May 1, that the Department of Energy would immediately terminate the current management contract with Associated Universities, Inc. at Brookhaven National Laboratory in Upton, New York. Peña said that he made the decision after receiving the results of a laboratory safety management review conducted by the independent oversight arm of DOE's Office of Environment, Safety and Health. In addition, the Secretary said he found unacceptable "the continued on page 8 Volume 20 Friday, May 16, 1997

34

Pneumatic soil removal tool  

DOE Patents [OSTI]

A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw. 3 figs.

Neuhaus, J.E.

1992-10-13T23:59:59.000Z

35

Applied ALARA techniques  

SciTech Connect (OSTI)

The presentation focuses on some of the time-proven and new technologies being used to accomplish radiological work. These techniques can be applied at nuclear facilities to reduce radiation doses and protect the environment. The last reactor plants and processing facilities were shutdown and Hanford was given a new mission to put the facilities in a safe condition, decontaminate, and prepare them for decommissioning. The skills that were necessary to operate these facilities were different than the skills needed today to clean up Hanford. Workers were not familiar with many of the tools, equipment, and materials needed to accomplish:the new mission, which includes clean up of contaminated areas in and around all the facilities, recovery of reactor fuel from spent fuel pools, and the removal of millions of gallons of highly radioactive waste from 177 underground tanks. In addition, this work has to be done with a reduced number of workers and a smaller budget. At Hanford, facilities contain a myriad of radioactive isotopes that are 2048 located inside plant systems, underground tanks, and the soil. As cleanup work at Hanford began, it became obvious early that in order to get workers to apply ALARA and use hew tools and equipment to accomplish the radiological work it was necessary to plan the work in advance and get radiological control and/or ALARA committee personnel involved early in the planning process. Emphasis was placed on applying,ALARA techniques to reduce dose, limit contamination spread and minimize the amount of radioactive waste generated. Progress on the cleanup has,b6en steady and Hanford workers have learned to use different types of engineered controls and ALARA techniques to perform radiological work. The purpose of this presentation is to share the lessons learned on how Hanford is accomplishing radiological work.

Waggoner, L.O.

1998-02-05T23:59:59.000Z

36

Ordered Vertex Removal Subgraph Problems  

E-Print Network [OSTI]

of the vertex removal and subgraph problems are shown to be P­complete. In addition, a natural lex­ icographicOrdered Vertex Removal and Subgraph Problems Ray Greenlaw Department of Computer Science University­8703196. #12; Vertex Removal and Graph Problems Ray Greenlaw Department of Computer Science FR­35

Greenlaw, Ray

37

Photoactivated metal removal  

SciTech Connect (OSTI)

The authors propose the use of photochromic dyes as light activated switches to bind and release metal ions. This process, which can be driven by solar energy, can be used in environmental and industrial processes to remove metals from organic and aqueous solutions. Because the metals can be released from the ligands when irradiated with visible light, regeneration of the ligands and concentration of the metals may be easier than with conventional ion exchange resins. Thus, the process has the potential to be less expensive than currently used metal extraction techniques. In this paper, the authors report on their studies of the metal binding of spirogyran dyes and the hydrolytic stability of these dyes. They have prepared a number of spirogyrans and measured their binding constants for calcium and magnesium. They discuss the relationship of the structure of the dyes to their binding strengths. These studies are necessary towards determining the viability of this technique.

Nimlos, M.R.; Filley, J.; Ibrahim, M.A.; Watt, A.S.; Blake, D.M.

1999-07-01T23:59:59.000Z

38

Mexico HEU Removal: Fact Sheet | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Mexico HEU Removal: Fact Sheet | National Nuclear Security Administration Mexico HEU Removal: Fact Sheet | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > Media Room > Fact Sheets > Mexico HEU Removal: Fact Sheet Fact Sheet Mexico HEU Removal: Fact Sheet Mar 26, 2012 At the 2012 Nuclear Security Summit, the United States, Mexico and Canada announced the successful removal of HEU from Mexico and conversion of the

39

Composition And Method For Removing Photoresist Materials From Electronic  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Composition And Method For Removing Photoresist Materials From Composition And Method For Removing Photoresist Materials From Electronic Components Composition And Method For Removing Photoresist Materials From Electronic Components The invention is a combination of at least one dense phase fluid and at least one dense phase fluid modifier. Available for thumbnail of Feynman Center (505) 665-9090 Email Composition And Method For Removing Photoresist Materials From Electronic Components The invention is a combination of at least one dense phase fluid and at least one dense phase fluid modifier which can be used to contact substrates for electronic parts such as semiconductor wafers or chips to remove photoresist materials which are applied to the substrates during manufacture of the electronic parts. The dense phase fluid modifier is one

40

Removing Arsenic from Drinking Water  

ScienceCinema (OSTI)

See how INL scientists are using nanotechnology to remove arsenic from drinking water. For more INL research, visit http://www.facebook.com/idahonationallaboratory

None

2013-05-28T23:59:59.000Z

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Removing Arsenic from Drinking Water  

SciTech Connect (OSTI)

See how INL scientists are using nanotechnology to remove arsenic from drinking water. For more INL research, visit http://www.facebook.com/idahonationallaboratory

None

2011-01-01T23:59:59.000Z

42

High-Activity Radioactive Materials Removed From Mexico | National Nuclear  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

High-Activity Radioactive Materials Removed From Mexico | National Nuclear High-Activity Radioactive Materials Removed From Mexico | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > Media Room > Press Releases > High-Activity Radioactive Materials Removed From Mexico Press Release High-Activity Radioactive Materials Removed From Mexico Nov 15, 2013 WASHINGTON, D.C. - The National Nuclear Security Administration (NNSA)

43

Arsenic Removal by Photochemical Methods: Nanoparticulate Zerovalent Iron  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Arsenic Removal by Photochemical Methods: Nanoparticulate Zerovalent Iron Arsenic Removal by Photochemical Methods: Nanoparticulate Zerovalent Iron and Heterogeneous Photocatalysis with TiO2 Speaker(s): Marta Litter Date: November 19, 2010 - 11:00am Location: 90-3122 Seminar Host/Point of Contact: Hugo Destaillats Arsenic in groundwater is a dramatic global problem due to the high incidence of arsenicosis or HACRE (Chronic Endemic Regional Hydro-arsenicism, Hidroarsenicismo Crónico Regional Endémico in Spanish), a severe illness causing skin lesions and cancer in extended regions of the world. For this reason, research on low-cost technologies for As removal to be applied in isolated, poor, rural locations is mandatory. This seminar will present a brief overview of arsenic pollution issues and mitigation needs in Latin America. It will also present results on As(V) removal using

44

Plutonium Removal from Sweden: Fact Sheet | National Nuclear Security  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Removal from Sweden: Fact Sheet | National Nuclear Security Removal from Sweden: Fact Sheet | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > Media Room > Fact Sheets > Plutonium Removal from Sweden: Fact Sheet Fact Sheet Plutonium Removal from Sweden: Fact Sheet Mar 27, 2012 Sweden has been a global leader on nonproliferation, and was one of the

45

Czech Republic HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Czech Republic HEU Removal | National Nuclear Security Administration Czech Republic HEU Removal | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > content > Four-Year Plan > Czech Republic HEU Removal Czech Republic HEU Removal Location Czech Republic United States 49° 35' 23.3628" N, 15° 4' 23.6712" E See map: Google Maps Printer-friendly version Printer-friendly version

46

High-Activity Radioactive Materials Removed From Mexico | National Nuclear  

National Nuclear Security Administration (NNSA)

High-Activity Radioactive Materials Removed From Mexico | National Nuclear High-Activity Radioactive Materials Removed From Mexico | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > Media Room > Press Releases > High-Activity Radioactive Materials Removed From Mexico Press Release High-Activity Radioactive Materials Removed From Mexico Nov 15, 2013 WASHINGTON, D.C. - The National Nuclear Security Administration (NNSA)

47

South Africa HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

South Africa HEU Removal | National Nuclear Security Administration South Africa HEU Removal | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > content > Four-Year Plan > South Africa HEU Removal South Africa HEU Removal Location South Africa United States 30° 33' 35.0604" S, 22° 19' 27.1884" E See map: Google Maps Printer-friendly version Printer-friendly version

48

Ukraine Fuel Removal: Fact Sheet | National Nuclear Security Administration  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ukraine Fuel Removal: Fact Sheet | National Nuclear Security Administration Ukraine Fuel Removal: Fact Sheet | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > Media Room > Fact Sheets > Ukraine Fuel Removal: Fact Sheet Fact Sheet Ukraine Fuel Removal: Fact Sheet Mar 26, 2012 For nearly two decades, the United States and Ukraine have cooperated on a

49

Sandia technology used to remove radioactive material at Fukushima |  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

technology used to remove radioactive material at Fukushima | technology used to remove radioactive material at Fukushima | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > NNSA Blog > Sandia technology used to remove radioactive material ... Sandia technology used to remove radioactive material at Fukushima Posted By Office of Public Affairs

50

Ukraine Fuel Removal: Fact Sheet | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Ukraine Fuel Removal: Fact Sheet | National Nuclear Security Administration Ukraine Fuel Removal: Fact Sheet | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > Media Room > Fact Sheets > Ukraine Fuel Removal: Fact Sheet Fact Sheet Ukraine Fuel Removal: Fact Sheet Mar 26, 2012 For nearly two decades, the United States and Ukraine have cooperated on a

51

NNSA Removes High-Activity Radioactive Materials from Boston | National  

National Nuclear Security Administration (NNSA)

Removes High-Activity Radioactive Materials from Boston | National Removes High-Activity Radioactive Materials from Boston | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > Media Room > Press Releases > NNSA Removes High-Activity Radioactive Materials from Boston Press Release NNSA Removes High-Activity Radioactive Materials from Boston Nov 22, 2013

52

theoretical and applied fracture  

E-Print Network [OSTI]

theoretical and applied fracture mechanics ELSEVIER Theoretical and Applied Fracture Mechanics 00 and Applied Fracture Mechanics 00 (1995) 000-000 Recently, some European countries developed defect specific. A suitable probabilistic fracture mechanic

Cizelj, Leon

53

WCH Removes Massive Test Reactor  

Broader source: Energy.gov [DOE]

RICHLAND, WA -- Hanford's River Corridor contractor, Washington Closure Hanford, has met a significant cleanup challenge on the U.S. Department of Energy's (DOE) Hanford Site by removing a 1,082...

54

Recommendation 199: Recommendation to Remove Uncontaminated Areas...  

Office of Environmental Management (EM)

9: Recommendation to Remove Uncontaminated Areas of the Oak Ridge Reservation from the National Priorities List Recommendation 199: Recommendation to Remove Uncontaminated Areas of...

55

Removing Stains from Washable Fabrics.  

E-Print Network [OSTI]

of May 8, 1914, as amended, and June 30, 1914, in cooperation with the United States Department of Agriculture. Zerle L. Carpenter, Director, Texas Agricultural Extension Service, The Texas A&M University System. lOM-1l-88, New CLO ...I UUL. Z TA24S.7 8873 NO.1616 B.1616 / Texas Agricultural Extension Service LIBRARY FEB 0 1 1989 Texas A&M University Removing Stains from Washable Fabrics Ann Vanderpoorten 8eard* Most spots and stains can be removed by prompt...

Beard, Ann Vanderpoorten

1988-01-01T23:59:59.000Z

56

Massive Hanford Test Reactor Removed - Plutonium Recycle Test...  

Office of Environmental Management (EM)

Massive Hanford Test Reactor Removed - Plutonium Recycle Test Reactor removed from Hanford's 300 Area Massive Hanford Test Reactor Removed - Plutonium Recycle Test Reactor removed...

57

Multipollutant Removal with WOWClean System  

E-Print Network [OSTI]

such as petcoke, coal, wood, diesel and natural gas. In addition to significant removal of CO2, test results demonstrate the capability to reduce 99.5% SOx (from levels as high as 2200 ppm), 90% reduction of NOx, and > 90% heavy metals. The paper will include...

Romero, M.

2010-01-01T23:59:59.000Z

58

POSITION OPENING APPLIED STATISTICS  

E-Print Network [OSTI]

: Assistant or Associate Professor of Applied Statistics. Employment Beginning: September 16, 2012 DescriptionPOSITION OPENING APPLIED STATISTICS Department of Decision Sciences Charles H. Lundquist College at the University of Oregon is seeking to fill one tenure-track faculty position in Applied Statistics. Rank

Shepp, Larry

59

Applied quantum mechanics 1 Applied Quantum Mechanics  

E-Print Network [OSTI]

that describe the time-dependent state . If can be expressed as a power series in the perturbing potential of a one dimensional har- monic oscillator. At time t = 0 a perturbation is applied where V0-dimensional rectangular potential well for which in the range and elsewhere. It is decided to control the state

Levi, Anthony F. J.

60

Removing Barriers to Interdisciplinary Research  

E-Print Network [OSTI]

A significant amount of high-impact contemporary scientific research occurs where biology, computer science, engineering and chemistry converge. Although programmes have been put in place to support such work, the complex dynamics of interdisciplinarity are still poorly understood. In this paper we interrogate the nature of interdisciplinary research and how we might measure its "success", identify potential barriers to its implementation, and suggest possible mechanisms for removing these impediments.

Naomi Jacobs; Martyn Amos

2010-12-19T23:59:59.000Z

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

CX-008345: Categorical Exclusion Determination | Department of...  

Broader source: Energy.gov (indexed) [DOE]

CX-008345: Categorical Exclusion Determination Remove Abandoned Bayou Choctaw Timber Bridge Over NorthSouth Canal CX(s) Applied: B1.23 Date: 05032012 Location(s): Louisiana...

62

CX-009785: Categorical Exclusion Determination  

Broader source: Energy.gov [DOE]

Roosevelt Radio Station Emergency Generator Removal and Replacement CX(s) Applied: B1.3 Date: 01/07/2013 Location(s): Washington Offices(s): Bonneville Power Administration

63

CX-008401: Categorical Exclusion Determination | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Track Communications Tower Removal CX(s) Applied: B1.19 Date: 05092012 Location(s): Colorado Offices(s): Western Area Power Administration-Rocky Mountain Region Western Area...

64

CX-009078: Categorical Exclusion Determination | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Dismantle and removal (D&R) of Domestic Water (DW) & Process Water (PWS) heater tanks CX(s) Applied: B1.3 Date: 07112012 Location(s): South Carolina Offices(s): Savannah...

65

CX-010357: Categorical Exclusion Determination | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Exclusion Determination Replacement Removal and Closure of Underground Storage Tanks USTs CX(s) Applied: B2.5; B6.1 Date: 11192012 Location(s): Tennessee, California,...

66

CX-012172: Categorical Exclusion Determination | Department of...  

Broader source: Energy.gov (indexed) [DOE]

CX(s) Applied: B6.1 Date: 04142014 Location(s): South Carolina Offices(s): Savannah River Operations Office L Area Operations to remove water from and repackage two drums of...

67

CX-007646: Categorical Exclusion Determination | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Categorical Exclusion Determination CX-007646: Categorical Exclusion Determination Insulation removal work in F-Tank Farm CX(s) Applied: B1.3 Date: 01042012 Location(s): South...

68

CX-007062: Categorical Exclusion Determination | Department of...  

Broader source: Energy.gov (indexed) [DOE]

CX-007062: Categorical Exclusion Determination Removing Lead Base Paint and Primer from Crane Trolley Plate CX(s) Applied: B3.6 Date: 09012011 Location(s): Aiken,...

69

CX-100125 Categorical Exclusion Determination  

Office of Energy Efficiency and Renewable Energy (EERE)

A novel unit operation to remove hydrophobic contaminants Award Number: DE-EE0005772 CX(s) Applied: B3.6 Date: 11/26 /2014 Location(s): WI Office(s): Golden Field Office

70

CX-007917: Categorical Exclusion Determination | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Exclusion Determination CX-007917: Categorical Exclusion Determination Demolition of Utilities and Facility Restoration (B14B17 ATEC Removal) CX(s) Applied: B1.23 Date: 0227...

71

CX-009223: Categorical Exclusion Determination  

Broader source: Energy.gov [DOE]

CH2MHill Plateau Remediation Company - Asbestos Removal Actions CX(s) Applied: B1.16 Date: 08/03/2012 Location(s): Washington Offices(s): River Protection-Richland Operations Office

72

CX-010027: Categorical Exclusion Determination | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Exclusion Determination CX-010027: Categorical Exclusion Determination Removal of Glass Feed Prep System from 786-A (EDL) CX(s) Applied: B1.23 Date: 01222013 Location(s):...

73

CX-009410: Categorical Exclusion Determination  

Broader source: Energy.gov [DOE]

Granby (Farr) Pumping Plant Nest Removal Project CX(s) Applied: B1.3 Date: 10/03/2012 Location(s): Colorado Offices(s): Western Area Power Administration

74

CX-012177: Categorical Exclusion Determination  

Broader source: Energy.gov [DOE]

Removal of ignition sources, cable, and conduit in the 292-H Central Exhaust HEPA Room CX(s) Applied: B2.5 Date: 04/14/2014 Location(s): South Carolina Offices(s): Savannah River Operations Office

75

Methods for removing contaminant matter from a porous material  

DOE Patents [OSTI]

Methods of removing contaminant matter from porous materials include applying a polymer material to a contaminated surface, irradiating the contaminated surface to cause redistribution of contaminant matter, and removing at least a portion of the polymer material from the surface. Systems for decontaminating a contaminated structure comprising porous material include a radiation device configured to emit electromagnetic radiation toward a surface of a structure, and at least one spray device configured to apply a capture material onto the surface of the structure. Polymer materials that can be used in such methods and systems include polyphosphazine-based polymer materials having polyphosphazine backbone segments and side chain groups that include selected functional groups. The selected functional groups may include iminos, oximes, carboxylates, sulfonates, .beta.-diketones, phosphine sulfides, phosphates, phosphites, phosphonates, phosphinates, phosphine oxides, monothio phosphinic acids, and dithio phosphinic acids.

Fox, Robert V. (Idaho Falls, ID) [Idaho Falls, ID; Avci, Recep (Bozeman, MT) [Bozeman, MT; Groenewold, Gary S. (Idaho Falls, ID) [Idaho Falls, ID

2010-11-16T23:59:59.000Z

76

Analytical Chemistry Applied Mathematics  

E-Print Network [OSTI]

Analytical Chemistry Applied Mathematics Architectural Engineering Architecture Architecture Electricity Markets Environmental Engineering Food Process Engineering Food Safety & Technology Architecture Information Technology & Management Integrated Building Delivery Landscape Architecture Management

Heller, Barbara

77

How To Apply  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

CSCEEE undergraduate students are encouraged to apply. Required Materials Current Resume Official University Transcript (with spring courses posted andor a copy of Spring...

78

Applied Energy Programs  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Applied Energy Programs Applied Energy Programs Applied Energy Programs Los Alamos is using its world-class scientific capabilities to enhance national energy security by developing energy sources with limited environmental impact and by improving the efficiency and reliability of the energy infrastructure. CONTACT US Acting Program Director Melissa Fox (505) 663-5538 Email Applied Energy Program Office serves as the hub connecting the Laboratory's scientific and technical resources to DOE sponsors, DoD programs, and to industry. The Applied Energy Program Office manages Los Alamos National Laboratory programs funded by the Department of Energy's (DOE's) Offices of Energy Efficiency/Renewable Energy, Electricity Delivery and Energy Reliability, and Fossil Energy. With energy use increasing across the nation and the

79

Libya HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Plan Libya HEU Removal Libya HEU Removal Location Libya United States 27 34' 9.5448" N, 17 24' 8.4384" E See map: Google Maps Javascript is required to view this map....

80

Canada HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Plan Canada HEU Removal Canada HEU Removal Location Canada United States 53 47' 24.972" N, 104 35' 23.4384" W See map: Google Maps Javascript is required to view this map....

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Israel HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Plan Israel HEU Removal Israel HEU Removal Location Israel United States 30 53' 18.2328" N, 34 52' 14.178" E See map: Google Maps Javascript is required to view this map....

82

Uzbekistan HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Uzbekistan HEU Removal Uzbekistan HEU Removal Location Uzbekistan United States 42 6' 56.196" N, 63 22' 8.9076" E See map: Google Maps Javascript is required to view this map...

83

France HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Four-Year Plan France HEU Removal France HEU Removal Location United States 45 44' 20.0544" N, 2 17' 6.5616" E See map: Google Maps Javascript is required to view this map...

84

Chile HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Four-Year Plan Chile HEU Removal Chile HEU Removal Location United States 25 28' 1.4916" S, 69 33' 55.548" W See map: Google Maps Javascript is required to view this map...

85

Taiwan HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Plan Taiwan HEU Removal Taiwan HEU Removal Location Taiwan United States 24 35' 37.4964" N, 120 53' 36.798" E See map: Google Maps Javascript is required to view this map....

86

Romania HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Plan Romania HEU Removal Romania HEU Removal Location Romania United States 45 47' 1.932" N, 24 41' 50.1576" E See map: Google Maps Javascript is required to view this map....

87

Serbia HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Plan Serbia HEU Removal Serbia HEU Removal Location Serbia United States 44 22' 45.7068" N, 20 26' 4.452" E See map: Google Maps Javascript is required to view this map....

88

Poland HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Plan Poland HEU Removal Poland HEU Removal Location Poland United States 53 23' 50.2872" N, 17 50' 30.4692" E See map: Google Maps Javascript is required to view this map....

89

Vietnam HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Plan Vietnam HEU Removal Vietnam HEU Removal Location Vietnam United States 13 12' 30.8628" N, 108 19' 30.702" E See map: Google Maps Javascript is required to view this map....

90

Remove Condensate with Minimal Air Loss  

Broader source: Energy.gov [DOE]

This tip sheet outlines several condensate removal methods as part of maintaining compressed air system air quality.

91

AEROSPACE SCIENCES Applied aerodynamics  

E-Print Network [OSTI]

AEROSPACE SCIENCES Applied aerodynamics This year saw significant progress in industry, research labs, and academia in the development of flow-control concepts, novel configuration aerodynamic concepts, and aerodynamic im- provement technologies for enhancing the fuel efficiency and performance

Xu, Kun

92

Applied large eddy simulation  

Science Journals Connector (OSTI)

...2971-2983. doi:10.1098/rsta.2008.0303 . Audio Supplement Audio Supplement Audio files from the Applied large eddy simulation...fidelity. | Whittle Laboratory, Department of Engineering, University of Cambridge, Cambridge CB2 1PZ...

2009-01-01T23:59:59.000Z

93

Comparative Analysis of Alternative Means for Removing Noncondensable Gases  

Open Energy Info (EERE)

Comparative Analysis of Alternative Means for Removing Noncondensable Gases Comparative Analysis of Alternative Means for Removing Noncondensable Gases from Flashed-Steam Geothermal Power Plants:April 1999 - March 2000 Dataset Summary Description This dataset corresponds to the final report on a screening study to compare six methods of removing noncondensable gases from direct-use geo-thermal steam power plants. This report defines the study methodologies and compares the performance and economics of selected gas-removal systems. Recommendations are presented for follow-up investigations and implementation of some of the technologies discussed. The specific gas-removal methods include five vacuum system configurations using the conventional approach of evacuating gas/vapor mixtures from the power plant condenser system and a system for physical separation of steam and gases upstream of the power turbine. The study focused on flashed-steam applications, but the results apply equally well to flashed-steam and dry-steam geothermal power plant configurations. Two gas-removal options appear to offer profitable economic potential. The hybrid vacuum system configurations and the reboiler process yield positive net present value results over wide-ranging gas concentrations. The hybrid options look favorable for both low-temperature and high-temperature resource applications. The reboiler looks profitable for low-temperature resource applications for gas levels above about 20,000 parts per million by volume. A vacuum system configuration using a three-stage turbocompressor battery may be profitable for low-temperature resources, but results show that the hybrid system is more profitable. The biphase eductor alternative cannot be recommended for commercialization at this time. The report is available from NREL's publication database.

94

Method of making thermally removable epoxies  

DOE Patents [OSTI]

A method of making a thermally-removable epoxy by mixing a bis(maleimide) compound to a monomeric furan compound containing an oxirane group to form a di-epoxy mixture and then adding a curing agent at temperatures from approximately room temperature to less than approximately 90.degree. C. to form a thermally-removable epoxy. The thermally-removable epoxy can be easily removed within approximately an hour by heating to temperatures greater than approximately 90.degree. C. in a polar solvent. The epoxy material can be used in protecting electronic components that may require subsequent removal of the solid material for component repair, modification or quality control.

Loy, Douglas A. (Albuquerque, NM); Wheeler, David R. (Albuquerque, NM); Russick, Edward M. (Rio Rancho, NM); McElhanon, James R. (Albuquerque, NM); Saunders, Randall S. (late of Albuquerque, NM)

2002-01-01T23:59:59.000Z

95

Nitrogen removal from natural gas  

SciTech Connect (OSTI)

According to a 1991 Energy Information Administration estimate, U.S. reserves of natural gas are about 165 trillion cubic feet (TCF). To meet the long-term demand for natural gas, new gas fields from these reserves will have to be developed. Gas Research Institute studies reveal that 14% (or about 19 TCF) of known reserves in the United States are subquality due to high nitrogen content. Nitrogen-contaminated natural gas has a low Btu value and must be upgraded by removing the nitrogen. In response to the problem, the Department of Energy is seeking innovative, efficient nitrogen-removal methods. Membrane processes have been considered for natural gas denitrogenation. The challenge, not yet overcome, is to develop membranes with the required nitrogen/methane separation characteristics. Our calculations show that a methane-permeable membrane with a methane/nitrogen selectivity of 4 to 6 would make denitrogenation by a membrane process viable. The objective of Phase I of this project was to show that membranes with this target selectivity can be developed, and that the economics of the process based on these membranes would be competitive. Gas permeation measurements with membranes prepared from two rubbery polymers and a superglassy polymer showed that two of these materials had the target selectivity of 4 to 6 when operated at temperatures below - 20{degrees}C. An economic analysis showed that a process based on these membranes is competitive with other technologies for small streams containing less than 10% nitrogen. Hybrid designs combining membranes with other technologies are suitable for high-flow, higher-nitrogen-content streams.

NONE

1997-04-01T23:59:59.000Z

96

ADVANCES IN DUST DETECTION AND REMOVAL FOR TOKAMAKS  

SciTech Connect (OSTI)

Dust diagnostics and removal techniques are vital for the safe operation of next step fusion devices such as ITER. In the tokamak environment, large particles or fi bers can fall on the electrostatic detector potentially causing a permanent short. An electrostatic dust detector developed in the laboratory is being applied to the National Spherical Torus Experiment (NSTX). We report on the development of a gas puff system that uses helium to clear such particles from the detector. Experiments at atmospheric pressure with varying nozzle designs, backing pressures, puff durations and exit fl ow orientations have given an optimal confi guration that effectively removes particles from a 25 cm area. Similar removal effi ciencies were observed under a vacuum base pressure of 1 mTorr. Dust removal from next step tokamaks will be required to meet regulatory dust limits. A tri-polar grid of fi ne interdigitated traces has been designed that generates an electrostatic traveling wave for conveying dust particles to a drain. First trials with only two working electrodes have shown particle motion in optical microscope images.

Campos, A.; Skinner, C.H.

2009-01-01T23:59:59.000Z

97

Applied Science/Techniques  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Applied Science/Techniques Applied Science/Techniques Applied Science/Techniques Print The ALS is an excellent incubator of new scientific techniques and instrumentation. Many of the technical advances that make the ALS a world-class soft x-ray facility are developed at the ALS itself. The optical components in use at the ALS-mirrors and lenses optimized for x-ray wavelengths-require incredibly high-precision surfaces and patterns (often formed through extreme ultraviolet lithography at the ALS) and must undergo rigorous calibration and testing provided by beamlines and equipment from the ALS's Optical Metrology Lab and Berkeley Lab's Center for X-Ray Optics. New and/or continuously improved experimental techniques are also a crucial element of a thriving scientific facility. At the ALS, examples of such "technique" highlights include developments in lensless imaging, soft x-ray tomography, high-throughput protein analysis, and high-power coherent terahertz radiation.

98

Information Science, Computing, Applied Math  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Capabilities ISC Applied Math science-innovationassetsimagesicon-science.jpg Information Science, Computing, Applied Math National security depends on science and...

99

Removal of Last Remaining HEU from Vietnam - Time Lapse Video | National  

National Nuclear Security Administration (NNSA)

Removal of Last Remaining HEU from Vietnam - Time Lapse Video | National Removal of Last Remaining HEU from Vietnam - Time Lapse Video | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > Media Room > Video Gallery > Removal of Last Remaining HEU from Vietnam ... Removal of Last Remaining HEU from Vietnam - Time Lapse Video Removal of Last Remaining HEU from Vietnam - Time Lapse Video

100

SUSTAINABILITY WHO CAN APPLY  

E-Print Network [OSTI]

FUNDED BY CALL FOR SUSTAINABILITY RESEARCH STUDENT WHO CAN APPLY Undergraduate and graduate Participate in the Global Change & Sustainability Center's Research Symposium; attend workshops with faculty or publish in the U's student-run sustainability publication to be released in May 2014. Are you conducting

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Part 3: Removal Action | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

3: Removal Action 3: Removal Action Part 3: Removal Action Question: When may removal actions be initiated? Answer: Removal actions may be initiated when DOE determines that the action will prevent, minimize, stabilize, or eliminate a risk to health or the environment. The NCP specifies that the determination that a risk to health or the environment is appropriate for removal action should be based on: actual or potential exposure of humans, animals, or the food chain the presence of contained hazardous substances that pose a threat of release the threat of migration of the hazardous substances the threat of fire or explosion the availability of an appropriate Federal or State response capability [section 300.415(b)(2)]. In essence, where DOE identifies a threat of exposure to or migration of

102

Method and system for the removal of oxides of nitrogen and sulfur from combustion processes  

DOE Patents [OSTI]

A process for removing oxide contaminants from combustion gas, and employing a solid electrolyte reactor, includes: (a) flowing the combustion gas into a zone containing a solid electrolyte and applying a voltage and at elevated temperature to thereby separate oxygen via the solid electrolyte, (b) removing oxygen from that zone in a first stream and removing hot effluent gas from that zone in a second stream, the effluent gas containing contaminant, (c) and pre-heating the combustion gas flowing to that zone by passing it in heat exchange relation with the hot effluent gas.

Walsh, John V. (Glendora, CA)

1987-12-15T23:59:59.000Z

103

Process for particulate removal from coal liquids  

DOE Patents [OSTI]

Suspended solid particulates are removed from liquefied coal products by first subjecting such products to hydroclone action for removal in the underflow of the larger size particulates, and then subjecting the overflow from said hydroclone action, comprising the residual finer particulates, to an electrostatic field in an electrofilter wherein such finer particulates are deposited in the bed of beads of dielectric material on said filter. The beads are periodically cleaned by backwashing to remove the accumulated solids.

Rappe, Gerald C. (Macungie, PA)

1983-01-01T23:59:59.000Z

104

E-Print Network 3.0 - applied stress measurements Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Vol 47 No 5 May 2005 269 Introduction Summary: , that develops in the sample after the removal of the applied load; and (iii) local stress, generated... in the neighbourhood of...

105

Install Removable Insulation on Valves and Fittings  

Broader source: Energy.gov [DOE]

This tip sheet on installing removable insulation on valves and fittings provides how-to advice for improving steam systems using low-cost, proven practices and technologies.

106

Method of making thermally removable polymeric encapsulants  

DOE Patents [OSTI]

A method of making a thermally-removable encapsulant by heating a mixture of at least one bis(maleimide) compound and at least one monomeric tris(furan) or tetrakis(furan) compound at temperatures from above room temperature to less than approximately 90.degree. C. to form a gel and cooling the gel to form the thermally-removable encapsulant. The encapsulant can be easily removed within approximately an hour by heating to temperatures greater than approximately 90.degree. C., preferably in a polar solvent. The encapsulant can be used in protecting electronic components that may require subsequent removal of the encapsulant for component repair, modification or quality control.

Small, James H. (Santa Fe, NM); Loy, Douglas A. (Albuquerque, NM); Wheeler, David R. (Albuquerque, NM); McElhanon, James R. (Albuquerque, NM); Saunders, Randall S. (late of Albuquerque, NM)

2001-01-01T23:59:59.000Z

107

Australia HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Australia HEU Removal | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the...

108

Argentina HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Argentina HEU Removal | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the...

109

Keeler-Pennwalt Wood Pole Removal  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

natural environment. The entire remaining length of the Keeler-Pennwalt transmission line, from Keeler Substation to Structure 96, will be removed (approximately 9 miles)....

110

Applied Science/Techniques  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Applied Science/Techniques Print Applied Science/Techniques Print The ALS is an excellent incubator of new scientific techniques and instrumentation. Many of the technical advances that make the ALS a world-class soft x-ray facility are developed at the ALS itself. The optical components in use at the ALS-mirrors and lenses optimized for x-ray wavelengths-require incredibly high-precision surfaces and patterns (often formed through extreme ultraviolet lithography at the ALS) and must undergo rigorous calibration and testing provided by beamlines and equipment from the ALS's Optical Metrology Lab and Berkeley Lab's Center for X-Ray Optics. New and/or continuously improved experimental techniques are also a crucial element of a thriving scientific facility. At the ALS, examples of such "technique" highlights include developments in lensless imaging, soft x-ray tomography, high-throughput protein analysis, and high-power coherent terahertz radiation.

111

Acid dyes removal using low cost adsorbents  

Science Journals Connector (OSTI)

Dyestuff production units and dyeing units have always had pressing need techniques that allow economical pre-treatment for colour in the effluent. The effectiveness of adsorption for dye removal from wastewaters has made it an ideal alternative to other expensive treatment options. Removal of acid green

A.H. Aydin; Y. Bulut; O. Yavuz

2004-01-01T23:59:59.000Z

112

COST OF MERCURY REMOVAL IN IGCC PLANTS  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Cost of Mercury Removal Cost of Mercury Removal in an IGCC Plant Final Report September 2002 Prepared for: The United States Department of Energy National Energy Technology Laboratory By: Parsons Infrastructure and Technology Group Inc. Reading, Pennsylvania Pittsburgh, Pennsylvania DOE Product Manager: Gary J. Stiegel DOE Task Manager: James R. Longanbach Principal Investigators: Michael G. Klett Russell C. Maxwell Michael D. Rutkowski PARSONS The Cost of Mercury Removal in an IGCC Plant Final Report i September 2002 TABLE OF CONTENTS Section Title Page 1 Summary 1 2 Introduction 3 3 Background 4 3.1 Regulatory Initiatives 4 3.2 Mercury Removal for Conventional Coal-Fired Plants 4 3.3 Mercury Removal Experience in Gasification 5 3.4 Variability of Mercury Content in Coal 6 4 Design Considerations 7 4.1 Carbon Bed Location

113

Tritium Removal from Carbon Plasma Facing Components  

SciTech Connect (OSTI)

Tritium removal is a major unsolved development task for next-step devices with carbon plasma-facing components. The 2-3 order of magnitude increase in duty cycle and associated tritium accumulation rate in a next-step tokamak will place unprecedented demands on tritium removal technology. The associated technical risk can be mitigated only if suitable removal techniques are demonstrated on tokamaks before the construction of a next-step device. This article reviews the history of codeposition, the tritium experience of TFTR (Tokamak Fusion Test Reactor) and JET (Joint European Torus) and the tritium removal rate required to support ITER's planned operational schedule. The merits and shortcomings of various tritium removal techniques are discussed with particular emphasis on oxidation and laser surface heating.

C.H. Skinner; J.P. Coad; G. Federici

2003-11-24T23:59:59.000Z

114

for Applied Linguistics.  

E-Print Network [OSTI]

per calendar year, promptly at intervals of three months. Each pack is to contain two numbers of the Finite String. The difficulties of the first year of publication of AJCL are responsible for the d'elayed, production of this ~ack, which also contains Volume 11, Number 4 of TFS. ~k would be a rash editor indeed who guaranteed promptness without caveat. The present editbr must warn the subscriber that'the end of the diLf.iculti-es is not yet fixed for a date certa.in. AMERICAN JQURNAL OF COMPL'TATIONAL LINGUISTICS is published by the Center for Applied Linguistics for the Association for Computational Linguistics.

Assistant Nancy Jokovl Ch

115

Applied Optoelectronics | Open Energy Information  

Open Energy Info (EERE)

Optoelectronics Jump to: navigation, search Name: Applied Optoelectronics Place: Sugar Land, Texas Zip: 77478 Product: Applied Optoelectronics designs, develops, and manufactures...

116

ORISE: Applied health physics projects  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Applied health physics projects The Oak Ridge Institute for Science and Education (ORISE) provides applied health physics services to government agencies needing technical support...

117

Three Essays in Applied Econometrics  

E-Print Network [OSTI]

the effect of removing hazardous waste on house prices. McMillen and Thorsnes (1999) construct a house price index using a semiparametric regression (see also McMillen 1996). Other applications of nonparametric or semiparametric estimation techniques...

Murao, Hiroshi

2008-01-07T23:59:59.000Z

118

In situ removal of contamination from soil  

DOE Patents [OSTI]

A process of remediation of cationic heavy metal contamination from soil utilizes gas phase manipulation to inhibit biodegradation of a chelating agent that is used in an electrokinesis process to remove the contamination. The process also uses further gas phase manipulation to stimulate biodegradation of the chelating agent after the contamination has been removed. The process ensures that the chelating agent is not attacked by bioorganisms in the soil prior to removal of the contamination, and that the chelating agent does not remain as a new contaminant after the process is completed. 5 figs.

Lindgren, E.R.; Brady, P.V.

1997-10-14T23:59:59.000Z

119

Method and apparatus for removing ions from soil  

DOE Patents [OSTI]

A method and apparatus are presented for selectively removing species of ions from an area of soil. Permeable membranes 14 and 18 impregnated with an ion exchange resin that is specific to one or more species of chemical ions are inserted into ground 12 in close proximity to, and on opposing sides of, a soil area of interest 22. An electric potential is applied across electrodes 26 and 28 to cause the migration of ions out of soil area 22 toward the membranes 14 and 18. Preferably, the resin exchanges ions of sodium or hydrogen for ions of mercury that it captures from soil area 22. Once membranes 14 and 18 become substantially saturated with mercury ions, the potential applied across electrodes 26 and 28 is discontinued and membranes 14 and 18 are preferably removed from soil 12 for storage or recovery of the ions. The membranes are also preferably impregnated with a buffer to inhibit the effect of the hydrolysis of water by current from the electrodes.

Bibler, J.P.

1993-03-02T23:59:59.000Z

120

Method and apparatus for removing ions from soil  

DOE Patents [OSTI]

A method and apparatus for selectively removing species of ions from an area of soil. Permeable membranes 14 and 18 impregnated with an ion exchange resin that is specific to one or more species of chemical ions are inserted into ground 12 in close proximity to, and on opposing sides of, a soil area of interest 22. An electric potential is applied across electrodes 26 and 28 to cause the migration of ions out of soil area 22 toward the membranes 14 and 18. Preferably, the resin exchanges ions of sodium or hydrogen for ions of mercury that it captures from soil area 22. Once membranes 14 and 18 become substantially saturated with mercury ions, the potential applied across electrodes 26 and 28 is discontinued and membranes 14 and 18 are preferably removed from soil 12 for storage or recovery of the ions. The membranes are also preferably impregnated with a buffer to inhibit the effect of the hydrolysis of water by current from the electrodes.

Bibler, Jane P. (813 E. Rollingwood Rd., Aiken, SC 29801)

1993-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Microsoft Word - CX-Keeler-Pennwalt-StJohns-Keeler-OC_De-EnergizedRemoval_WEB.docx  

Broader source: Energy.gov (indexed) [DOE]

3 3 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Chad Hamel Project Manager - TEP- TPP- 1 Proposed Action: De-energized Wood Pole Removal Project PP&A Project No.: 2601 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B4.10 Removal of electric transmission facilities Location: Multnomah and Washington counties, OR Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA proposes to remove two de-energized transmission lines that are located within the Portland Metro area. The entire remaining length of the Keeler- Pennwalt transmission line, from Keeler Substation to Structure 9/6, would be removed (approximately nine miles). Approximately three miles of the St. John's Tap to Keeler-Oregon

122

NNSA's Global Threat Reduction Initiative Removes More Than One Ton of  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Removes More Than One Ton of Removes More Than One Ton of Food | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > NNSA Blog > NNSA's Global Threat Reduction Initiative Removes More ... NNSA's Global Threat Reduction Initiative Removes More Than One Ton of Food Posted By Office of Public Affairs Contributing to DOE/NNSA's efforts to support the Office of Personnel

123

Evaluation of asbestos-abatement techniques. Phase 1. Removal. Final report  

SciTech Connect (OSTI)

Airborne asbestos levels were measured by transmission electron microscopy (TEM), scanning electron microscopy (SEM) and phase constrast microscopy (PCM) before, during, and after removal of sprayed-on acoustical plaster from the ceilings of four suburban schools. Air samples were collected at three types of sites: indoor sites with asbestos-containing material (ACM), indoor sites without ACM (indoor control), and sites outside the building (outdoor control). Bulk samples of the ACM were collected prior to the removal and analyzed by polarized light microscopy (PLM). A vigorous quality-assurance program was applied to all aspects of the study. Airborne asbestos levels were low before and after removal. Elevated, but still relatively low levels were measured outside the work area during removal. This emphasizes the need for careful containment of the work area.

Chesson, J.; Margeson, D.P.; Ogden, J.; Reichenbach, N.G.; Bauer, K.

1985-10-01T23:59:59.000Z

124

Impact of approach used to determine removal levels of drugs of abuse during wastewater treatment  

Science Journals Connector (OSTI)

Abstract In this study the levels of 19 drugs of abuse were estimated throughout a wastewater treatment plant using polar organic chemical integrative samplers (POCIS), 24h composite samples and grab samples. Overall removal efficiencies and removals in between each treatment unit were calculated using load data for each sampling technique as well as removals that take into account the hydraulic residence time distribution of the treatment plant (time-shifted mass balancing approach). Amphetamine-type stimulants, cocaine and its major metabolite, benzoylecgonine and opioid levels determined with 24h composite samples were generally comparable to those obtained with POCIS and grab samples. Negative mass balances resulting from the estimation of overall removal efficiencies by POCIS, day-to-day mass balancing of 24h composite and grab sample data did not occur when the hydraulic retention time (HRT) distributions of the plant were taken into account for calculation. Among the compounds investigated, cocaine exhibited the highest overall removal (90%) while codeine had the lowest with 13%, respectively. Sampling between the treatment units revealed that highest removal occurs during biological treatment as compared to primary or secondary clarification. Methylenedioxyamphetamine (MDA), fentanyl, dihydrocodeine and heroin were not detected in wastewater at any of the sampling locations at the treatment plant regardless of the sampling technique. The study demonstrates the benefits of applying the time-shifted mass balancing approach to the calculation of removals of drugs of abuse during wastewater treatment.

Angela Rodayan; Marius Majewsky; Viviane Yargeau

2014-01-01T23:59:59.000Z

125

Method of removing polychlorinated biphenyl from oil  

DOE Patents [OSTI]

Polychlorinated biphenyls are removed from oil by extracting the biphenyls into methanol. The mixture of methanol and extracted biphenyls is distilled to separate methanol therefrom, and the methanol is recycled for further use in extraction of biphenyls from oil.

Cook, G.T.; Holshouser, S.K.; Coleman, R.M.; Harless, C.E.; Whinnery, W.N. III

1982-03-17T23:59:59.000Z

126

Part removal of 3D printed parts  

E-Print Network [OSTI]

An experimental study was performed to understand the correlation between printing parameters in the FDM 3D printing process, and the force required to remove a part from the build platform of a 3D printing using a patent ...

Pea Doll, Mateo

2014-01-01T23:59:59.000Z

127

Laser removal of sludge from steam generators  

DOE Patents [OSTI]

A method of removing unwanted chemical deposits known as sludge from the metal surfaces of steam generators with laser energy is provided. Laser energy of a certain power density, of a critical wavelength and frequency, is intermittently focused on the sludge deposits to vaporize them so that the surfaces are cleaned without affecting the metal surface (sludge substrate). Fiberoptic tubes are utilized for laser beam transmission and beam direction. Fiberoptics are also utilized to monitor laser operation and sludge removal.

Nachbar, Henry D. (Ballston Lake, NY)

1990-01-01T23:59:59.000Z

128

Oil removal from water via adsorption  

E-Print Network [OSTI]

WILLIAM EDWARD JACOBS 1974 OIL REMOVAL FROM WATER VIA ADSORPTION A Thesis by WILLIAM EDWARD JACOBS Submitted to the Graduate College of Texas ASM University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE... December 1973 Major Subject: Civil Engineering OIL REMOVAL FROM WATER VIA ADSORPTION A Thesis by WILLIAM EDWARD JACOBS Approved as to style and content by: C airman of Committee ea o Department m er Member Memb December 1973 ABSTRACT Oil...

Jacobs, William Edward

2012-06-07T23:59:59.000Z

129

Lead removal by using carbon nanotubes  

Science Journals Connector (OSTI)

Exposure to lead (Pb) can cause anemia, diseases of the liver and kidneys, brain damage and ultimately death. For these reasons, heavy metals must be removed as much as possible from water. The removal of Pb (II) ions from aqueous solution using carbon nanotubes (CNT) as the adsorbent was investigated. The effects of pH were studied at 25C. Batch mode adsorption study has revealed that the removal of Pb (II) ions was maximum (85% removal) at pH 5 and achieved 83% removal at 40 mg/L of CNTs. The adsorption continuously increased in the pH range of 3-5, beyond which the adsorption could not be carried out due to the precipitation of metal. This study was also supported by characterisation of CNTs using FESEM. The characterisation suggested that at acidic condition (pH 5), the surfaces of CNTs are more aligned and well-integrated compared to CNTs at different pHs. Finally, it can be concluded that CNTs could be a potential adsorbent for the removal of Pb from wastewater.

A.A. Muataz; M. Fettouhi; A. Al-Mammum; N. Yahya

2009-01-01T23:59:59.000Z

130

Nonextensive statistical dynamics applied to wall turbulence  

E-Print Network [OSTI]

We apply a formalism of nonextensive statistical mechanics to experimental wall turbulence data, for the first time to our knowledge. Wind tunnel data for velocity differences a streamwise distance $r$ apart are compared to the prediction from theory as developed by Beck. The simplest theory, in which all free parameters are removed, is found to reproduce statistics for the wall-normal velocity component remarkably well, even for $r$ well beyond the corresponding integral scale, while the corresponding description of the streamwise velocity fluctuations is reasonable at separations below the integral scale. A least-squares 2-parameter fit is performed, and the dependence of the optimum parameter values on wall separation and $r$ is analysed. Both parameters are found to be approximately independent of wall-separation in the logarithmic sub-layer.

Simen Ellingsen; Per-ge Krogstad

2014-02-10T23:59:59.000Z

131

School of Applied Technology School of Applied Technology  

E-Print Network [OSTI]

School of Applied Technology School of Applied Technology Daniel F. and Ada L. Rice Campus Illinois Institute of Technology 201 E. Loop Road Wheaton, IL 60187 630.682.6000 www.iit.edu/applied tech/ Dean and Academic Director, Information Technology and Management Programs: C. Robert Carlson Director of Operations

Heller, Barbara

132

School of Applied Technology School of Applied Technology  

E-Print Network [OSTI]

School of Applied Technology School of Applied Technology Daniel F. and Ada L. Rice Campus Illinois Institute of Technology 201 E. Loop Road Wheaton, IL 60187 630.682.6000 www.iit.edu/applied tech/ Dean Technology and Management Programs: Mazin Safar Director, Marketing & Development: Scott Pfeiffer Director

Heller, Barbara

133

Removal of \\{PAHs\\} with surfactant-enhanced soil washing: Influencing factors and removal effectiveness  

Science Journals Connector (OSTI)

PAH removal with surfactant enhanced washing was investigated through a series of laboratory tests to examine the effect of stirring speed, washing time, surfactant concentration, liquid/solid ratio, temperature, and on-and-off mode. The first four factors show significant influence on the PAH removal while the latter two do not. Total removal ratio and a new proposed parameter, solubilization percentage, are used to evaluate the effectiveness quantitatively.

Sheng Peng; Wei Wu; Jiajun Chen

2011-01-01T23:59:59.000Z

134

Overview of conservation treatments applied to rock glyph archaeological sites  

E-Print Network [OSTI]

generally accepted suggestion. There were several other suggestions offered that were equally inappropriate. These included scrubbing the surface with wire brushes, applying commercial paint remover products marketed specifically for vandalism, using... world interest turned again to the protection of archaeological sites as evidenced by the 1964 ICOMOS Venice Charter for the Conservation and Restoration of Monuments and Sites. The Venice Charter established goals of preservation and conservation...

Dandridge, Debra E

2012-06-07T23:59:59.000Z

135

Evaluation of Passive and Active Soot Filters for Removal of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Passive and Active Soot Filters for Removal of Particulate Emissions from Diesel Engines Evaluation of Passive and Active Soot Filters for Removal of Particulate Emissions from...

136

High Metal Removal Rate Process for Machining Difficult Materials...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

High Metal Removal Rate Process for Machining Difficult Materials High Metal Removal Rate Process for Machining Difficult Materials highmetalremovalprocessfactsheet.pdf More...

137

Colorado Nonhydrocarbon Gases Removed from Natural Gas (Million...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Nonhydrocarbon Gases Removed from Natural Gas (Million Cubic Feet) Colorado Nonhydrocarbon Gases Removed from Natural Gas (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3...

138

Oak Ridge Removes Laboratory's Greatest Source of Groundwater...  

Broader source: Energy.gov (indexed) [DOE]

Removes Laboratory's Greatest Source of Groundwater Contamination Oak Ridge Removes Laboratory's Greatest Source of Groundwater Contamination May 1, 2012 - 12:00pm Addthis Workers...

139

Vehicle Technologies Office Merit Review 2014: Removing Barriers...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Review 2014: Removing Barriers, Implementing Policies and Advancing Alternative Fuels Markets in New England Vehicle Technologies Office Merit Review 2014: Removing Barriers,...

140

Advanced Water Removal via Membrane Solvent Extraction | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Water Removal via Membrane Solvent Extraction Advanced Water Removal via Membrane Solvent Extraction advwaterremovalmse.pdf More Documents & Publications Advance Patent Waiver...

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

241-AZ-101 pump removal trough analysis  

SciTech Connect (OSTI)

As part of the current Hanford mission of environmental cleanup, various long length equipment must be removed from highly radioactive waste tanks. The removal of equipment will utilize portions of the Equipment Removal System for Project W320 (ERS-W320), specifically the 50 ton hydraulic trailer system. Because the ERS-W320 system was designed to accommodate much heavier equipment it is adequate to support the dead weight of the trough, carriage and related equipment for 241AZ101 pump removal project. However, the ERS-W320 components when combined with the trough and its` related components must also be analyzed for overturning due to wind loads. Two troughs were designed, one for the 20 in. diameter carriage and one for the 36 in. diameter carriage. A proposed 52 in. trough was not designed and, therefore is not included in this document. In order to fit in the ERS-W320 strongback the troughs were design with the same widths. Structurally, the only difference between the two troughs is that more material was removed from the stiffener plates on the 36 in trough. The reduction in stiffener plate material reduces the allowable load. Therefore, only the 36 in. trough was analyzed.

Coverdell, B.L.

1995-10-17T23:59:59.000Z

142

Biochemical Removal of HAP Precursors from Coal  

SciTech Connect (OSTI)

Column biooxidation tests with Kentucky coal confirmed results of earlier shake flask tests showing significant removal from the coal of arsenic, selenium, cobalt, manganese, nickel and cadmium. Rates of pyrite biooxidation in Kentucky coal were only slightly more than half the rates found previously for Indiana and Pittsburgh coals. Removal of pyrite from Pittsburgh coal by ferric ion oxidation slows markedly as ferrous ions accumulate in solution, requiring maintenance of high redox potentials in processes designed for removal of pyrite and hazardous air pollutant (HAP) precursors by circulation of ferric solutions through coal. The pyrite oxidation rates obtained in these tests were used by Unifield Engineering to support the conceptual designs for alternative pyrite and HAP precursor bioleaching processes for the phase 2 pilot plant. Thermophilic microorganisms were tested to determine if mercury could be mobilized from coal under elevated growth temperatures. There was no evidence for mercury removal from coal under these conditions. However, the activity of the organisms may have liberated mercury physically. It is also possible that the organisms dissolved mercury and it readsorbed to the clay preferentially. Both of these possibilities are undergoing further testing. The Idaho National Engineering and Environmental Laboratory?s (INEEL) slurry column reactor was operated and several batches of feed coal, product coal, waste solids and leach solutions were submitted to LBL for HAP precursor analysis. Results to date indicate significant removal of mercury, arsenic and other HAP precursors in the combined physical-biological process.

Gregory J. Olson

1997-05-12T23:59:59.000Z

143

Removal of As, Cd, Cu, Ni, Pb, and Zn from a highly contaminated industrial soil using surfactant enhanced soil washing  

Science Journals Connector (OSTI)

Surfactant enhanced soil washing (SESW) was applied to an industrial contaminated soil. A preliminary characterization of the soil regarding the alkaline-earth metals, Na, K, Ca and Mg took values of 2866, 2036, 2783 and 4149mg/kg. The heavy metals As, Cd, Cu, Pb, Ni and Zn, had values of 4019, 14, 35582, 70, 2603, and 261mg/kg, respectively. When using different surfactants, high removal of Cu, Ni and Zn were found, and medium removals for Pb, As and Cd. In the case of these three metals, tap water removed more than the surfactant solutions, except for the case of As. There were surfactants with average removals (this is, the removal for all the metals studied) of 67.1% (Tween 80), 64.9% (Surfacpol 14104) and 61.2% (Emulgin W600). There were exceptional removals using Texapon N-40 (83.2%, 82.8% and 86.6% for Cu, Ni and Zn), Tween 80 (85.9, 85.4 and 81.5 for Cd, Zn and Cu), Polafix CAPB (79%, 83.2% and 49.7% for Ni, Zn and As). The worst results were obtained with POLAFIX LO with a global removal of 45%, well below of the average removal with tap water (50.2%).All removal efficiencies are reported for a one step washing using 0.5% surfactant solutions, except for the case of mezquite gum, where a 0.1% solution was employed.

Luis G. Torres; Rosario B. Lopez; Margarita Beltran

2012-01-01T23:59:59.000Z

144

Application and Removal of Strippable Coatings via Remote Platform - 13133  

SciTech Connect (OSTI)

Florida International University's (FIU's) Applied Research Center is currently supporting the Department of Energy (DOE) Environmental Management Office of D and D and Facility Engineering program. FIU is supporting DOE's initiative to improve safety, reduce technical risks, and limit uncertainty within D and D operations by identifying technologies suitable to meet specific facility D and D requirements, assessing the readiness of those technologies for field deployment, and conducting feasibility studies and technology demonstrations of selected technologies and working with technology vendors to optimize the design of their current technologies to accomplish dangerous and demanding tasks during D and D operations. To meet one identified technology gap challenge for a technology to remotely apply strippable coatings, fixatives and decontamination gels, FIU identified and performed an initial demonstration of an innovative remote fixative sprayer platform from International Climbing Machines (ICM). The selected technology was demonstrated spraying fixative products at the hot cell mockup facility at the Applied Research Center at FIU in November 2008 under cold (non-radioactive) conditions. The remotely controlled platform was remotely operated and entered the facility and sprayed a fixative onto horizontal and vertical surfaces. Based on the initial FIU demonstration and the specific technical requirements identified at the DOE facilities, a follow-up demonstration was expanded to include strippable coatings and a decontamination gel, which was demonstrated in June 2010 at the ICM facility in Ithaca, NY. This second technology evaluation documented the ability of the remote system to spray the selected products on vertical stainless steel and concrete surfaces to a height of 3 meters (10 feet) and to achieve sufficient coverage and product thickness to promote the ability to peel/remove the strippable coatings and decontamination gel. The next challenge was to determine if a remote platform could be used to remove the strippable coatings and decontamination gels. In 2012, FIU worked with the technology provider, ICM, to conduct feasibility and trade studies to identify the requirements for the remote removal of strippable coatings or decontamination gels using the existing remote controlled platform. (authors)

Shoffner, P.; Lagos, L. [Applied Research Center, Florida International University, 10555 West Flagler Street, Suite 2100, Miami, FL 33174 (United States)] [Applied Research Center, Florida International University, 10555 West Flagler Street, Suite 2100, Miami, FL 33174 (United States); Maggio, S. [International Climbing Machine, 630 Elmira Road, Ithaca, NY 14850 (United States)] [International Climbing Machine, 630 Elmira Road, Ithaca, NY 14850 (United States)

2013-07-01T23:59:59.000Z

145

Method of making thermally removable polyurethanes  

DOE Patents [OSTI]

A method of making a thermally-removable polyurethane material by heating a mixture of a maleimide compound and a furan compound, and introducing alcohol and isocyanate functional groups, where the alcohol group and the isocyanate group reacts to form the urethane linkages and the furan compound and the maleimide compound react to form the thermally weak Diels-Alder adducts that are incorporated into the backbone of the urethane linkages during the formation of the polyurethane material at temperatures from above room temperature to less than approximately 90.degree. C. The polyurethane material can be easily removed within approximately an hour by heating to temperatures greater than approximately 90.degree. C. in a polar solvent. The polyurethane material can be used in protecting electronic components that may require subsequent removal of the solid material for component repair, modification or quality control.

Loy, Douglas A. (Albuquerque, NM); Wheeler, David R. (Albuquerque, NM); McElhanon, James R. (Livermore, CA); Saunders, Randall S. (late of Albuquerque, NM); Durbin-Voss, Marvie Lou (Albuquerque, NM)

2002-01-01T23:59:59.000Z

146

Nitrate removal from drinking water -- Review  

SciTech Connect (OSTI)

Nitrate concentrations in surface water and especially in ground water have increased in Canada, the US, Europe, and other areas of the world. This trend has raised concern because nitrates cause methemoglobiinemia in infants. Several treatment processes including ion exchange, biological denitrification, chemical denitrification, reverse osmosis, electrodialysis, and catalytic denitrification can remove nitrates from water with varying degrees of efficiency, cost, and ease of operation. Available technical data, experience, and economics indicate that ion exchange and biological denitrification are more acceptable for nitrate removal than reverse osmosis. Ion exchange is more viable for ground water while biological denitrification is the preferred alternative for surface water. This paper reviews the developments in the field of nitrate removal processes.

Kapoor, A.; Viraraghavan, T. [Univ. of Regina, Saskatchewan (Canada)

1997-04-01T23:59:59.000Z

147

NFRC Procedures for Applied Films  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Applied Films Applied Films Last update: 12/10/2013 07:29 PM NFRC now has a procedure for adding applied films to substrates in Optics5 and importing those applied film constructions into WINDOW5 to be used in a whole product calculation. The information presented below is provided to help simulators with this process. Feel free to contact us at WINDOWHelp@lbl.gov with questions or comments. NFRC Applied Film Procedure Applied Film Procedures (approved by NFRC) (PDF file) Approved Applied Film List (IGDB 33.0) (PDF file) NFRC Laminate Procedure Training Powerpoint with Examples (This Powerpoint presentation was used in the NFRC web based training sessions in December 2006 and January 2007) PowerPoint Presentation (PPT file) PowerPoint Presentation (PDF file) Help and Troubleshooting

148

Photolytic removal of \\{DBPs\\} by medium pressure UV in swimming pool water  

Science Journals Connector (OSTI)

Abstract Medium pressure UV is used for controlling the concentration of combined chlorine (chloramines) in many public swimming pools. Little is known about the fate of other disinfection by-products (DBPs) in UV treatment. Photolysis by medium pressure UV treatment was investigated for 12 \\{DBPs\\} reported to be found in swimming pool water: chloroform, bromodichloromethane, dibromochloromethane, bromoform, dichloroacetonitrile, bromochloroacetonitrile, dibromoacetronitrile, trichloroacetonitrile, trichloronitromethane, dichloropropanone, trichloropropanone, and chloral hydrate. First order photolysis constants ranged 26-fold from 0.020min?1 for chloroform to 0.523min?1 for trichloronitromethane. The rate constants generally increased with bromine substitution. Using the UV removal of combined chlorine as an actinometer, the rate constants were recalculated to actual treatment doses of UV applied in a swimming pool. In an investigated public pool the UV dose was equivalent to an applied electrical energy of 1.34kWhm?3d?1 and the UV dose required to removed 90% of trichloronitromethane was 0.4kWhm?3d?1, while 2.6kWhm?3d?1 was required for chloral hydrate and the bromine containing haloacetonitriles and trihalomethanes ranged from 0.6 to 3.1kWhm?3d?1. It was predicted thus that a beneficial side-effect of applying UV for removing combined chlorine from the pool water could be a significant removal of trichloronitromethane, chloral hydrate and the bromine containing haloacetonitriles and trihalomethanes.

Kamilla M.S. Hansen; Raissa Zortea; Aurelia Piketty; Sergio Rodriguez Vega; Henrik Rasmus Andersen

2013-01-01T23:59:59.000Z

149

Removal of 2-Aminophenol Using Novel Adsorbents  

Science Journals Connector (OSTI)

The positive values of entropy show the increased randomness at solid/solution interface with some structural changes in the adsorbate and adsorbent and the affinity of adsorbents toward 2AP. ... Upon doubling the adsorbent amount from 10 to 20 g/L, the amount of phenol adsorbed also increases by almost two-fold. ... It is quite evident that, after 6 h of equilibrium, 27% of the total 2-aminophenol is removed by 10 g/L of the adsorbent slag, while 20 g/L of slag removed 37% of 2-aminophenol and 30 g/L of adsorbent adsorbs 42% under identical experimental conditions. ...

Vinod K. Gupta; Dinesh Mohan; Suhas; Kunwar P. Singh

2006-01-04T23:59:59.000Z

150

Process for removing metals from water  

DOE Patents [OSTI]

A process for removing metals from water including the steps of prefiltering solids from the water, adjusting the pH to between about 2 and 3, reducing the amount of dissolved oxygen in the water, increasing the pH to between about 6 and 8, adding water-soluble sulfide to precipitate insoluble sulfide- and hydroxide-forming metals, adding a containing floc, and postfiltering the resultant solution. The postfiltered solution may optionally be eluted through an ion exchange resin to remove residual metal ions. 2 tabs.

Napier, J.M.; Hancher, C.M.; Hackett, G.D.

1987-06-29T23:59:59.000Z

151

Electrostatic cleaning system for removal of sand from solar panels  

Science Journals Connector (OSTI)

Abstract An improved cleaning system has been developed that uses electrostatic force to remove sand from the surface of solar panels. A single-phase high voltage is applied to parallel wire electrodes embedded in the cover glass plate of a solar panel. It has been demonstrated that more than 90% of the adhering sand is repelled from the surface of the slightly inclined panel after the cleaning operation. The performance of the system was further improved by improving the electrode configuration and introducing natural wind on the surface of the panel, even when the deposition of sand on the panel is extremely high. The power consumption of this system is virtually zero. This technology is expected to increase the effective efficiency of mega solar power plants constructed in deserts at low latitudes.

Hiroyuki Kawamoto; Takuya Shibata

2015-01-01T23:59:59.000Z

152

Process removes Sr from nuclear wastes  

Science Journals Connector (OSTI)

Process removes Sr from nuclear wastes ... Scientists at Argonne National Laboratory have devised a chemical process for extracting and recovering strontium-90 from liquid nuclear wastes. ... Argonne chemist E. Philip Horwitz, head of the team, says it could be a significant aid in managing such radioactive wastes. ...

WARD WORTHY

1990-09-10T23:59:59.000Z

153

Removing dissolved inorganic contaminants from water  

SciTech Connect (OSTI)

This article describes the physicochemical treatment processes typically used to remove the more common inorganic contaminants from water and wastewater. These are precipitation, coprecipitation, adsorption, ion exchange, membrane separations by reverse osmosis and electrodialysis, and combinations of these processes. The general criteria for process selection are discussed, and the processes and their typical applications are described.

Clifford, D.; Subramonian, S.; Sorg, T.J.

1986-11-01T23:59:59.000Z

154

Method for Removing Precipitates in Biofuel  

Energy Innovation Portal (Marketing Summaries) [EERE]

At ORNL the application of ultrasonic energy, or sonication, has been shown to successfully remove or prevent the formation of 5090% of the precipitates in biofuels. Precipitates can plug filters as biodiesel is transported from one location to another, and often cannot be detected by visual inspection....

2010-12-08T23:59:59.000Z

155

Automatic Red Eye Removal for Digital Photography  

E-Print Network [OSTI]

Chapter 1 Automatic Red Eye Removal for Digital Photography FRANCESCA GASPARINI DISCo, Dipartimento The red eye effect is a well known problem in photography. It is often seen in amateur shots taken with a built-in flash, but the problem is also well known to professional photographers. Red eye is the red

Schettini, Raimondo

156

Plastic bottles > Remove lids (not recyclable)  

E-Print Network [OSTI]

Plastic bottles Please: > Remove lids (not recyclable) > Empty bottles > Rinse milk bottles, & other bottles if possible > Squash bottles www.st-andrews.ac.uk/estates/environment All types of plastic bottle accepted Clear, opaque and coloured bottles Labels can remain on X No plastic bags X No plastics

Brierley, Andrew

157

ASBESTOS PIPE-INSULATION REMOVAL ROBOT SYSTEM  

SciTech Connect (OSTI)

This final topical report details the development, experimentation and field-testing activities for a robotic asbestos pipe-insulation removal robot system developed for use within the DOE's weapon complex as part of their ER and WM program, as well as in industrial abatement. The engineering development, regulatory compliance, cost-benefit and field-trial experiences gathered through this program are summarized.

Unknown

2000-09-15T23:59:59.000Z

158

Removable partial overdentures for the irradiated patient  

SciTech Connect (OSTI)

Patients who have received radiotherapy to the head and neck area must avoid dental extractions and seek simplicity in treatment and home care follow-up. For partially edentulous patients, removable partial overdenture therapy can fulfill these goals while maintaining the high level of function and aesthetics desired by patients.11 references.

Rosenberg, S.W. (New York Univ. School of Dentistry, NY (USA))

1990-10-01T23:59:59.000Z

159

Pentek metal coating removal system: Baseline report  

SciTech Connect (OSTI)

The Pentek coating removal technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The Pentek coating removal system consisted of the ROTO-PEEN Scaler, CORNER-CUTTER{reg_sign}, and VAC-PAC{reg_sign}. They are designed to remove coatings from steel, concrete, brick, and wood. The Scaler uses 3M Roto Peen tungsten carbide cutters while the CORNER-CUTTER{reg_sign} uses solid needles for descaling activities. These hand tools are used with the VAC-PAC{reg_sign} vacuum system to capture dust and debris as removal of the coating takes place. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. Dust exposure minimal, but noise exposure was significant. Further testing for each exposure is recommended because of the environment where the testing demonstration took place. It is feasible that the dust and noise levels will be higher in an enclosed operating environment of different construction. In addition, other areas of concern found were arm-hand vibration, whole-body, ergonomics, heat stress, tripping hazards, electrical hazards, machine guarding, and lockout/tagout.

NONE

1997-07-31T23:59:59.000Z

160

Method of preparation of removable syntactic foam  

DOE Patents [OSTI]

Easily removable, environmentally safe, low-density, syntactic foams are disclosed which are prepared by mixing insoluble microballoons with a solution of water and/or alcohol-soluble polymer to produce a pourable slurry, optionally vacuum filtering the slurry in varying degrees to remove unwanted solvent and solute polymer, and drying to remove residual solvent. The properties of the foams can be controlled by the concentration and physical properties of the polymer, and by the size and properties of the microballoons. The suggested solute polymers are non-toxic and soluble in environmentally safe solvents such as water or low-molecular weight alcohols. The syntactic foams produced by this process are particularly useful in those applications where ease of removability is beneficial, and could find use in packaging recoverable electronic components, in drilling and mining applications, in building trades, in art works, in the entertainment industry for special effects, in manufacturing as temporary fixtures, in agriculture as temporary supports and containers and for delivery of fertilizer, in medicine as casts and splints, as temporary thermal barriers, as temporary protective covers for fragile objects, as filters for particulate matter, which matter may be easily recovered upon exposure to a solvent, as in-situ valves (for one-time use) which go from maximum to minimum impedance when solvent flows through, and for the automatic opening or closing of spring-loaded, mechanical switches upon exposure to a solvent, among other applications.

Arnold, Jr., Charles (Albuquerque, NM); Derzon, Dora K. (Albuquerque, NM); Nelson, Jill S. (Albuquerque, NM); Rand, Peter B. (Albuquerque, NM)

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

ASUWT JUDICIAL BOARD REMOVAL PROCESS "The ASUWT President shall establish and preside over the removal process, which shall commence  

E-Print Network [OSTI]

should not be removed. Additional time to submit supporting information may be requested and approvedASUWT JUDICIAL BOARD REMOVAL PROCESS "The ASUWT President shall establish and preside over the removal process, which shall commence within five (5) days after the Senate vote to bring removal

Borenstein, Elhanan

162

Sitewide Categorical Exclusion for Removal of Polychlorinated Biphenyl-Containing Items  

Broader source: Energy.gov (indexed) [DOE]

17 SWCX for Removal of PCB-Containing Items Revision 0 17 SWCX for Removal of PCB-Containing Items Revision 0 Sitewide Categorical Exclusion for Removal of Polychlorinated Biphenyl-Containing Items Introduction As defined in the U.S. Department of Energy's (DOE) Richland Operations Office Integrated An application of DOE categorical exclusions described in 10 CFR 1021, Appendices A and B, which may apply to Hanford Site proposed actions (activities) that are "sitewide" in nature and extent, which the cognizant DOE Hanford NCO has determined fit within the scope (i.e., same nature and intent, and of the san1e or lesser scope) ofDOE categorical exclusions described in 10 CFR 1021 Appendices A and B. The cognizant DOE Hanford NCO may issue specific sitewide categorical exclusions for use on proposed actions in which separate DOE approval to proceed is

163

Categorical Exclusion Determinations: Golden Field Office | Department of  

Broader source: Energy.gov (indexed) [DOE]

February 14, 2013 February 14, 2013 CX-010234: Categorical Exclusion Determination Alternate Spacing Heating Systems Residential Cold Climate Heat Pump CX(s) Applied: A9, B1.31, B3.6, B5.1 Date: 02/14/2013 Location(s): Missouri Offices(s): Golden Field Office February 14, 2013 CX-010230: Categorical Exclusion Determination Miniaturized Air to Refrigerant Heat Exchangers CX(s) Applied: A9, B3.6 Date: 02/14/2013 Location(s): Maryland Offices(s): Golden Field Office February 14, 2013 CX-010218: Categorical Exclusion Determination Sustainable Energy for Business Districts in China CX(s) Applied: A9, A11 Date: 02/14/2013 Location(s): California Offices(s): Golden Field Office February 13, 2013 CX-010236: Categorical Exclusion Determination U.S. Offshore Wind: Removing Market Barriers CX(s) Applied: A9

164

Categorical Exclusion Determinations: Savannah River Operations Office |  

Broader source: Energy.gov (indexed) [DOE]

July 20, 2012 July 20, 2012 CX-009070: Categorical Exclusion Determination A-Area Alternate Fire Water Supply CX(s) Applied: B1.3 Date: 07/20/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office July 20, 2012 CX-009069: Categorical Exclusion Determination Remove and Dispose of 107 A & B Tanks and Support Structure CX(s) Applied: B6.1 Date: 07/20/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office July 20, 2012 CX-009068: Categorical Exclusion Determination Hydrogen Charging Tritium Contaminated Metals CX(s) Applied: B3.6 Date: 07/20/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office July 16, 2012 CX-009077: Categorical Exclusion Determination F-Area Infrasturcture Improvement CX(s) Applied: B1.23 Date: 07/16/2012

165

Categorical Exclusion Determinations: Savannah River Operations Office |  

Broader source: Energy.gov (indexed) [DOE]

January 17, 2012 January 17, 2012 CX-007642: Categorical Exclusion Determination Parking Lot Construction North of Pad 717-14F CX(s) Applied: B1.15 Date: 01/17/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office January 4, 2012 CX-007646: Categorical Exclusion Determination Insulation removal work in F-Tank Farm CX(s) Applied: B1.3 Date: 01/04/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office January 4, 2012 CX-007645: Categorical Exclusion Determination Nonproliferation Technology Section - Nanomaterials Research CX(s) Applied: B3.6 Date: 01/04/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office December 29, 2011 CX-007650: Categorical Exclusion Determination Control Room Consolidation CX(s) Applied: B2.2

166

Categorical Exclusion Determinations: Savannah River Operations Office |  

Broader source: Energy.gov (indexed) [DOE]

November 7, 2011 November 7, 2011 CX-007671: Categorical Exclusion Determination Heat Exchanger Removal and Disposition CX(s) Applied: B6.1 Date: 11/07/2011 Location(s): South Carolina Offices(s): Savannah River Operations Office November 7, 2011 CX-007670: Categorical Exclusion Determination Maintenance Excavation of the B-07 Outfall Ditch CX(s) Applied: B1.3 Date: 11/07/2011 Location(s): South Carolina Offices(s): Savannah River Operations Office November 7, 2011 CX-007669: Categorical Exclusion Determination Vegetative Response to Metal Exposure in a Growing Media CX(s) Applied: B3.6 Date: 11/07/2011 Location(s): South Carolina Offices(s): Savannah River Operations Office October 27, 2011 CX-007672: Categorical Exclusion Determination Sampling of Nuclear Fuel Assembly CX(s) Applied: B3.6

167

Categorical Exclusion Determinations: Oregon | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

June 5, 2013 June 5, 2013 CX-010432: Categorical Exclusion Determination De-energized Wood Pole Removal Project CX(s) Applied: B4.10 Date: 06/05/2013 Location(s): Oregon, Oregon Offices(s): Bonneville Power Administration June 4, 2013 CX-010521: Categorical Exclusion Determination Recovery Act: Rural Electric Cooperative Geothermal Development CX(s) Applied: B4.12, B5.15 Date: 06/04/2013 Location(s): Oregon Offices(s): Golden Field Office June 4, 2013 CX-010433: Categorical Exclusion Determination Memaloose Meadows Land Acquisition CX(s) Applied: B1.25 Date: 06/04/2013 Location(s): Oregon Offices(s): Bonneville Power Administration June 3, 2013 CX-010435: Categorical Exclusion Determination De Moss Substation Expansion CX(s) Applied: B4.6 Date: 06/03/2013 Location(s): Oregon Offices(s): Bonneville Power Administration

168

Journal of Applied Ecology 2004  

E-Print Network [OSTI]

Journal of Applied Ecology 2004 41, 922­933 © 2004 British Ecological Society Blackwell Publishing that might guide management decisions. We tested whether ideas from landscape ecology (local vs. landscape-scale, Sacramento River, succession, vegetation Journal of Applied Ecology (2004) 41, 922­933 Introduction More than

Holl, Karen

169

Nutrient removal by grasses irrigated with wastewater and nitrogen balance for reed canarygrass  

SciTech Connect (OSTI)

To develop complementary wastewater treatment systems that increase nutrient reduction and recycling, an experiment was conducted to evaluate the efficiency of three grass species as catch crops for N, P, and K at Aurahammar wastewater treatment plant (WWTP) in the southern part of Sweden. Another objective was also to assess soil accumulation of N, P, and K and the risk of N leaching by drainage. Three grasses--reed canarygrass (Phalaris arundinacea L.), meadow foxtail (Alopecurus pratensis L.), and smooth bromegrass (Bromus inermis Leyss.)--were irrigated with a mixture of treated effluent and supernatant at two levels of intensity [optimum level (equal to evapotranspiration) and over-optimal level] and at two nutrient levels, approximately 150 and 300 kg N ha{sup {minus}1}. There were small differences in dry matter (DM) yield between grass species and no difference in N removal among species. The amount of N removed in harvested biomass to N applied was 0.58 in 1995 and 0.63 in 1996. The amount of N removed increased with increased nutrient load. Applied amounts of P were the same as P in harvested biomass. All species removed K amounts several times greater than applied amounts. Increased nutrient load increased overall K removal. The low amount of mineral N and especially NO{sub 3}{sup {minus}}-N in the soil profile in autumn samplings indicate the risk for leaching is small. Soil water NO{sub 3}{sup {minus}} contents were also low, <2.5 mg NO{sub 3}{sup {minus}}-N L{sup {minus}1} during the growing season, with a mean value of <1 mg NO{sub 3}{sup {minus}}-N L{sup {minus}1}.

Geber, U.

2000-04-01T23:59:59.000Z

170

Improved Processes to Remove Naphthenic Acids  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Improved Processes to Remove Naphthenic Acids Improved Processes to Remove Naphthenic Acids Final Technical Report (From October 1, 2002 to September 30, 2005) Principle Authors Aihua Zhang, Qisheng Ma, Kangshi Wang, Yongchun Tang (co-PI), William A. Goddard (PI), Date Report was issued: December 9, 2005 DOE Award number: DE-FC26-02NT15383 Name and Address of Submitting Organization California Institute of Technology 1200 East California Blvd., Pasadena, CA91125 Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any

171

TMI defueling project fuel debris removal system  

SciTech Connect (OSTI)

The three mile Island Unit 2 (TMI-2) pressurized water reactor loss-of-coolant accident on March 28, 1979, presented the nuclear community with many challenging remediation problems; most importantly, the removal of the fission products within the reactor containment vessel. To meet this removal problem, an air-lift system (ALS) can be used to employ compressed air to produce the motive force for transporting debris. Debris is separated from the transport stream by gravity separation. The entire method does not rely on any moving parts. Full-scale testing of the ALS at the Idaho National Engineering Laboratory (INEL) has demonstrated the capability of transporting fuel debris from beneath the LCSA into a standard fuel debris bucket at a minimum rate of 230 kg/min.

Burdge, B.

1992-01-01T23:59:59.000Z

172

TMI defueling project fuel debris removal system  

SciTech Connect (OSTI)

The three mile Island Unit 2 (TMI-2) pressurized water reactor loss-of-coolant accident on March 28, 1979, presented the nuclear community with many challenging remediation problems; most importantly, the removal of the fission products within the reactor containment vessel. To meet this removal problem, an air-lift system (ALS) can be used to employ compressed air to produce the motive force for transporting debris. Debris is separated from the transport stream by gravity separation. The entire method does not rely on any moving parts. Full-scale testing of the ALS at the Idaho National Engineering Laboratory (INEL) has demonstrated the capability of transporting fuel debris from beneath the LCSA into a standard fuel debris bucket at a minimum rate of 230 kg/min.

Burdge, B.

1992-08-01T23:59:59.000Z

173

Removal of arsenic compounds from petroliferous liquids  

DOE Patents [OSTI]

Described is a process for removing arsenic from petroliferous derived liquids by contacting said liquid at an elevated temperature with a divinylbenzene-crosslinked polystyrene having catechol ligands anchored thereon. Also, described is a process for regenerating spent catecholated polystyrene by removal of the arsenic bound to it from contacting petroliferous liquid as described above and involves: a. treating said spent catecholated polystyrene, at a temperature in the range of about 20.degree. to 100.degree. C. with an aqueous solution of at least one carbonate and/or bicarbonate of ammonium, alkali and alkaline earth metals, said solution having a pH between about 8 and 10 and, b. separating the solids and liquids from each other. Preferably the regeneration treatment is in two steps wherein step (a) is carried out with an aqueous alcoholic carbonate solution containing lower alkyl alcohol, and, steps (a) and (b) are repeated using a bicarbonate.

Fish, Richard H. (Berkeley, CA)

1985-01-01T23:59:59.000Z

174

Improve reformer operation with trace sulfur removal  

SciTech Connect (OSTI)

Modern bimetallic reforming catalysts typically have feed specifications for sulfur of 0.5 to 1 wppm in the reformer naphtha carge. Sulfur in the raw naphtha is reduced to this level by naphtha hydrotreating. While most naphtha hydrotreating operations can usually obtain these levels without substantial problems. It is difficult to obtain levels much below 0.5 to 1 wppm with this process. Revamp of a constrained existing hydrotreater to reduce product sulfur slightly can be extremely costly typically entailing replacement or addition of a new reactor. At Engelhard the authors demonstrated that if the last traces of sulfur remaining from hydrotreating can be removed, the resulting ultra-low sulfur feed greatly improves the reformer operation and provides substantial economic benefit to the refiner. Removal of the remaining trace sulfur is accomplished in a simple manner with a special adsorbent bed, without adding complexity to the reforming operation.

McClung, R.G.; Novak, W.J.

1987-01-01T23:59:59.000Z

175

Categorical Exclusion 4568, Crane Removal Project  

Broader source: Energy.gov (indexed) [DOE]

l)eterminationFornl l)eterminationFornl Project Title: Crane Removal Project (4568) Program or Program Office: Y -12 Site Office Location: Oak Ridge Tennessee Project Description: This work scope is to remove an old legacy crane trolley and old crane operated cab. General Administration/Management DA I - Routine business actions DA2 - Administrative contract amendments DA4 - Interpretations/rulings for existing regulations DA5 - Regulatory interpretations without environmental effect DA6 - Procedural rulemakings upgrade DA7 - Transfer of property, use unchanged DA8 - Award of technical support/M&O/personal service contracts DA9 - Info gathering, analysis, documentation, dissemination, and training DAIO - Reports on non-DOE legislation DA II - Technical advice and planning assistance

176

Process for removing mercury from aqueous solutions  

DOE Patents [OSTI]

A process for removing mercury from water to a level not greater than two parts per billion wherein an anion exchange material that is insoluble in water is contacted first with a sulfide containing compound and second with a compound containing a bivalent metal ion forming an insoluble metal sulfide. To this treated exchange material is contacted water containing mercury. The water containing not more than two parts per billion of mercury is separated from the exchange material.

Googin, John M. (Oak Ridge, TN); Napier, John M. (Oak Ridge, TN); Makarewicz, Mark A. (Knoxville, TN); Meredith, Paul F. (Knoxville, TN)

1986-01-01T23:59:59.000Z

177

REMOVAL OF LEGACY PLUTONIUM MATERIALS FROM SWEDEN  

SciTech Connect (OSTI)

U.S. Department of Energys National Nuclear Security Administration (NNSA) Office of Global Threat Reduction (GTRI) recently removed legacy plutonium materials from Sweden in collaboration with AB SVAFO, Sweden. This paper details the activities undertaken through the U.S. receiving site (Savannah River Site (SRS)) to support the characterization, stabilization, packaging and removal of legacy plutonium materials from Sweden in 2012. This effort was undertaken as part of GTRIs Gap Materials Program and culminated with the successful removal of plutonium from Sweden as announced at the 2012 Nuclear Security Summit. The removal and shipment of plutonium materials to the United States was the first of its kind under NNSAs Global Threat Reduction Initiative. The Environmental Assessment for the U.S. receipt of gap plutonium material was approved in May 2010. Since then, the multi-year process yielded many first time accomplishments associated with plutonium packaging and transport activities including the application of the of DOE-STD-3013 stabilization requirements to treat plutonium materials outside the U.S., the development of an acceptance criteria for receipt of plutonium from a foreign country, the development and application of a versatile process flow sheet for the packaging of legacy plutonium materials, the identification of a plutonium container configuration, the first international certificate validation of the 9975 shipping package and the first intercontinental shipment using the 9975 shipping package. This paper will detail the technical considerations in developing the packaging process flow sheet, defining the key elements of the flow sheet and its implementation, determining the criteria used in the selection of the transport package, developing the technical basis for the package certificate amendment and the reviews with multiple licensing authorities and most importantly integrating the technical activities with the Swedish partners.

Dunn, Kerry A. [Savannah River National Laboratory; Bellamy, J. Steve [Savannah River National Laboratory; Chandler, Greg T. [Savannah River National Laboratory; Iyer, Natraj C. [U.S. Department of Energy, National Nuclear Security Administration, Office of; Koenig, Rich E.; Leduc, D. [Savannah River National Laboratory; Hackney, B. [Savannah River National Laboratory; Leduc, Dan R. [Savannah River National Laboratory

2013-08-18T23:59:59.000Z

178

Removal of copper from ferrous scrap  

DOE Patents [OSTI]

A process for removing copper from ferrous or other metal scrap in which the scrap is contacted with a polyvalent metal sulfide slag in the presence of an excess of copper-sulfide forming additive to convert the copper to copper sulfide which is extracted into the slag to provide a ratio of copper in the slag to copper in the metal scrap of at least about 10.

Blander, M.; Sinha, S.N.

1987-07-30T23:59:59.000Z

179

Process for removing mercury from aqueous solutions  

DOE Patents [OSTI]

A process for removing mercury from water to a level not greater than two parts per billion wherein an anion exchange material that is insoluble in water is contacted first with a sulfide containing compound and second with a compound containing a bivalent metal ion forming an insoluble metal sulfide. To this treated exchange material is contacted water containing mercury. The water containing not more than two parts per billion of mercury is separated from the exchange material.

Googin, J.M.; Napier, J.M.; Makarewicz, M.A.; Meredith, P.F.

1985-03-04T23:59:59.000Z

180

Removal of copper from ferrous scrap  

DOE Patents [OSTI]

A process for removing copper from ferrous or other metal scrap in which the scrap is contacted with a polyvalent metal sulfide slag in the presence of an excess of copper-sulfide forming additive to convert the copper to copper sulfide which is extracted into the slag to provide a ratio of copper in the slag to copper in the metal scrap of at least about 10.

Blander, Milton (12833 S. 82nd Ct., Palos Park, IL 60464); Sinha, Shome N. (5748 Drexel, 2A, Chicago, IL 60637)

1990-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Application of biofiltration system on AOC removal: Column and field studies  

Science Journals Connector (OSTI)

The Cheng-Ching Lake Water Treatment Plant (CCLWTP) is the main supplier of domestic water for the Greater Kaohsiung area, the second largest metropolis in Taiwan. Biological activated carbon (BAC) filtration is one of the major treatment processes in CCLWTP. The objectives of this study were to evaluate the effectiveness of BAC filtration on water treatment in the studied advanced water treatment plant and its capability on pollutants [e.g., AOC (assimilable organic carbon), bromide, bromate, iron] removal. In this study, water samples from each treatment process of CCLWTP were collected and analyzed periodically to assess the variations in concentrations of AOC and other water quality indicators after each treatment unit. Moreover, the efficiency of biofiltration process using granular activated carbon (GAC) and anthracite as the fillers was also evaluated through a column experiment. Results show that the removal efficiencies for AOC, bromide, bromate, and iron are 86% 100%, 17%, and 30% after the BAC filter bed, respectively. This indicates that BAC filtration plays an important role in pollutant removal. Results also show that AOC concentrations in raw water and effluent of the CCLWTP are approximately 143 and 16?g acetate-Cl?1, respectively. This reveals that the treatment processes applied in CCLWTP is able to remove AOC effectively. Results of column study show that the AOC removal efficiencies in the GAC and anthracite columns are 60% and 17%, respectively. Microbial colonization on GAC and anthracite were detected via the observation of scanning electron microscopic images. The observed microorganisms included bacteria (rods, cocci, and filamentous bacteria), fungi, and protozoa. Results from this study provide us insight into the mechanisms of AOC removal by advanced water treatment processes. These findings would be helpful in designing a modified water treatment system for AOC removal and water quality improvement.

C.C. Chien; C.M. Kao; C.W. Chen; C.D. Dong; C.Y. Wu

2008-01-01T23:59:59.000Z

182

Applied Sedimentology | Open Energy Information  

Open Energy Info (EERE)

Sedimentology Jump to: navigation, search OpenEI Reference LibraryAdd to library Book: Applied Sedimentology Author R.C. Salley Published Academic Press, 2000 DOI Not Provided...

183

temperature heat pumps applied to  

E-Print Network [OSTI]

Very high- temperature heat pumps applied to energy efficiency in industry Application June 21th 2012 Energy efficiency : A contribution to environmental protection Kyoto Copenhage Emission, plastics Partnership : EDF R&D Bil

Oak Ridge National Laboratory

184

IIT SCHOOL OF APPLIED TECHNOLOGY  

E-Print Network [OSTI]

INDUSTRIAL TECHNOLOGY AND MANAGEMENT IIT SCHOOL OF APPLIED TECHNOLOGY PREPARING SKILLED INDIVIDUALS, INDUSTRIAL FACILITIES, SUPPLY CHAIN MANAGEMENT, SUSTAINABILITY AND MANUFACTURING TECHNOLOGY. #12;BE ONE to assess, implement, and utilize current technologies, and to learn how to manage industrial operations

Heller, Barbara

185

United Kingdom HEU Removal | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

HEU Removal United Kingdom HEU Removal Location United Kingdom United States 52 24' 15.1416" N, 1 34' 55.3116" W See map: Google Maps Javascript is required to view this map...

186

Hanford Begins New Campaign to Remove Excess Water from Double...  

Energy Savers [EERE]

Hanford Begins New Campaign to Remove Excess Water from Double-Shell Tanks Hanford Begins New Campaign to Remove Excess Water from Double-Shell Tanks September 30, 2014 - 12:00pm...

187

Removing nuclear waste, one shipment at a time  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Removing nuclear waste, one shipment at a time Removing nuclear waste, one shipment at a time The Lab's 1,000th shipment of transuranic waste recently left Los Alamos, on its way...

188

Process for removing technetium from iron and other metals  

DOE Patents [OSTI]

A process for removing technetium from iron and other metals comprises the steps of converting the molten, alloyed technetium to a sulfide dissolved in manganese sulfide, and removing the sulfide from the molten metal as a slag. 4 figs.

Leitnaker, J.M.; Trowbridge, L.D.

1999-03-23T23:59:59.000Z

189

EM's SPRU Celebrates Waste Removal Success, Safety Milestone...  

Office of Environmental Management (EM)

EM's SPRU Celebrates Waste Removal Success, Safety Milestone EM's SPRU Celebrates Waste Removal Success, Safety Milestone February 27, 2014 - 12:00pm Addthis Members of the EM and...

190

Nitrogen Removal From Low Quality Natural Gas  

SciTech Connect (OSTI)

Natural gas provides more than one-fifth of all the primary energy used in the United States. It is especially important in the residential sector, where it supplies nearly half of all the energy consumed in U.S. homes. However, significant quantities of natural gas cannot be produced economically because its quality is too low to enter the pipeline transportation system without some type of processing, other than dehydration, to remove the undesired gas fraction. Such low-quality natural gas (LQNG) contains significant concentration or quantities of gas other than methane. These non- hydrocarbons are predominantly nitrogen, carbon dioxide, and hydrogen sulfide, but may also include other gaseous components. The nitrogen concentrations usually exceeds 4%. Nitrogen rejection is presently an expensive operation which can present uneconomic scenarios in the potential development of natural gas fields containing high nitrogen concentrations. The most reliable and widely used process for nitrogen rejection from natural gas consists of liquefying the feed stream using temperatures in the order of - 300{degrees}F and separating the nitrogen via fractionation. In order to reduce the gas temperature to this level, the gas is compressed, cooled by mullet-stream heat exchangers, and expanded to low pressure. Significant energy for compression and expensive materials of construction are required. Water and carbon dioxide concentrations must be reduced to levels required to prevent freezing. SRI`s proposed research involves screening new nitrogen selective absorbents and developing a more cost effective nitrogen removal process from natural gas using those compounds. The long-term objective of this project is to determine the technical and economical feasibility of a N{sub 2}2 removal concept based on complexation of molecular N{sub 2} with novel complexing agents. Successful development of a selective, reversible, and stable reagent with an appropriate combination of capacity and N{sub 2} absorption/desorption characteristics will allow selective separation of N{sub 2} from LQNG.

Alvarado, D.B.; Asaro, M.F.; Bomben, J.L.; Damle, A.S.; Bhown, A.S.

1997-10-01T23:59:59.000Z

191

BNL | Accelerators for Applied Research  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Accelerators for Applied Research Accelerators for Applied Research Brookhaven National Lab operates several accelerator facilities dedicated to applied research. These facilities directly address questions and concerns on a tremendous range of fields, including medical imaging, cancer therapy, computation, and space exploration. Leading scientists lend their expertise to these accelerators and offer crucial assistant to collaborating researchers, pushing the limits of science and technology. Interested in gaining access to these facilities for research? See the contact number listed for each facility. RHIC tunnel Brookhaven Linac Isotope Producer The Brookhaven Linac Isoptope Producer (BLIP)-positioned at the forefront of research into radioisotopes used in cancer treatment and diagnosis-produces commercially unavailable radioisotopes for use by the

192

TYPE A VERIFICATION FOR THE HIGH FLUX BEAM REACTOR UNDERGROUND UTILITIES REMOVAL PHASE 2 DF WASTE LINE REMOVAL, BNL  

SciTech Connect (OSTI)

5098-SR-02-0 PROJECT-SPECIFIC TYPE A VERIFICATION FOR THE HIGH FLUX BEAM REACTOR UNDERGROUND UTILITIES REMOVAL PHASE 2 DF WASTE LINE REMOVAL, BROOKHAVEN NATIONAL LABORATORY

P.C. Weaver

2010-07-09T23:59:59.000Z

193

Removal of arsenic compounds from petroliferous liquids  

DOE Patents [OSTI]

The present invention in one aspect comprises a process for removing arsenic from petroliferous-derived liquids by contacting said liquid with a divinylbenzene-crosslinked polystyrene polymer (i.e. PS-DVB) having catechol ligands anchored to said polymer, said contacting being at an elevated temperature. In another aspect, the invention is a process for regenerating spent catecholated polystyrene polymer by removal of the arsenic bound to it from contacting petroliferous liquid in accordance with the aspect described above which regenerating process comprises: (a) treating said spent catecholated polystyrene polymer with an aqueous solution of at least one member selected from the group consisting of carbonates and bicarbonates of ammonium, alkali metals, and alkaline earth metals, said solution having a pH between about 8 and 10, and said treating being at a temperature in the range of about 20/sup 0/ to 100/sup 0/C; (b) separating the solids and liquids from each other. In a preferred embodiment the regeneration treatment is in two steps wherein step: (a) is carried out with an aqueous alcoholic carbonate solution which includes at least one lower alkyl alcohol, and, steps (c) and (d) are added. Steps (c) and (d) comprise: (c) treating the solids with an aqueous alcoholic solution of at least one ammonium, alkali or alkaline earth metal bicarbonate at a temperature in the range of about 20 to 100/sup 0/C; and (d) separating the solids from the liquids.

Fish, R.H.

1984-04-06T23:59:59.000Z

194

Process for removing polychlorinated biphenyls from soil  

DOE Patents [OSTI]

The present invention relates to a method of removing polychlorinated biphenyls from soil. The polychlorinated biphenyls are extracted from the soil by employing a liquid organic solvent dispersed in water in the ratio of about 1:3 to 3:1. The organic solvent includes such materials as short-chain hydrocarbons including kerosene or gasoline which are immiscible with water and are nonpolar. The organic solvent has a greater affinity for the PCB's than the soil so as to extract the PCB's from the soil upon contact. The organic solvent phase is separated from the suspended soil and water phase and distilled for permitting the recycle of the organic solvent phase and the concentration of the PCB's in the remaining organic phase. The present process can be satisfactorily practiced with soil containing 10 to 20% petroleum-based oils and organic fluids such as used in transformers and cutting fluids, coolants and the like which contain PCB's. The subject method provides for the removal of a sufficient concentration of PCB's from the soil to provide the soil with a level of PCB's within the guidelines of the Environmental Protection Agency.

Hancher, C.W.; Saunders, M.B.; Googin, J.M.

1984-11-16T23:59:59.000Z

195

The case for applied astronomy  

Science Journals Connector (OSTI)

......research-article Features The case for applied astronomy Martin Elvis Martin Elvis is an astronomer...Elvis looks at our golden age of astronomy and gives his personal view of what the future may hold for space and astronomy research, as that golden age hits......

Martin Elvis

2014-02-01T23:59:59.000Z

196

apply skills & experience build skills  

E-Print Network [OSTI]

senior apply skills & experience junior build skills sophomore research & execute freshman explore options1 2 3 4 s u p p o r t4-year career action plan parent about the center for career development Remind your student that it is never too soon or too late to seek an internship or summer job. build

Alvarez, Pedro J.

197

Applying Science to Everyday Life  

Science Journals Connector (OSTI)

Applying Science to Everyday Life ... Basic science ideas and their application appear regularly in peoples daily lives. ... It should be the goal of chemistry educators and other teachers of science to provide their students (and others when given the opportunity) with an appreciation of some basic principles. ...

Norbert J. Pienta

2014-11-11T23:59:59.000Z

198

Journal of Applied Ecology 2004  

E-Print Network [OSTI]

herbivores provide goods and income to rural communities, have major impacts on land use and habitats-Bianchet REVIEW The management of wild large herbivores to meet economic, conservation and environmental is applied to their management across the globe. To be effective, however, management has to be science

Festa-Bianchet, Marco

199

APPLIED THERMAL ENGINEERING Manuscript Draft  

E-Print Network [OSTI]

the heat pump from the grid during the two hours of electrical peak power · Design of a new heat exchangerAPPLIED THERMAL ENGINEERING Manuscript Draft TITLE: Experimental assessment of a PCM to air heat This paper presents a heat exchanger prototype containing PCM material designed to provide a 1kW heating

Paris-Sud XI, Université de

200

Applied Sustainability Political Science 319  

E-Print Network [OSTI]

1 Applied Sustainability Political Science 319 College of Charleston Spring 2013 Day/Time: TH 1 Address: fisherb@cofc.edu Office: 284 King Street, #206 (Office of Sustainability) Office Hours: by appt sustainability. It will focus on the development of semester-long sustainability projects, from conception

Young, Paul Thomas

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Massive Hanford Test Reactor Removed- Plutonium Recycle Test Reactor removed from Hanfords 300 Area  

Broader source: Energy.gov [DOE]

RICHLAND, WA Hanfords River Corridor contractor, Washington Closure Hanford, has met a significant cleanup challenge on the U.S. Department of Energys (DOE) Hanford Site by removing a 1,082-ton nuclear test reactor from the 300 Area.

202

Hanford Deep Dig Removes Contaminated Soil | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Deep Dig Removes Contaminated Soil Deep Dig Removes Contaminated Soil Hanford Deep Dig Removes Contaminated Soil March 11, 2013 - 12:00pm Addthis An aerial view of Hanford’s D Area shows the D Reactor (lower left) and DR Reactor. Workers are digging 85 feet to groundwater at two sites there to remove chromium contamination. An aerial view of Hanford's D Area shows the D Reactor (lower left) and DR Reactor. Workers are digging 85 feet to groundwater at two sites there to remove chromium contamination. Workers remove soil contaminated with sodium dichromate to prevent the chemical from reaching the groundwater and eventually the Columbia River. Workers remove soil contaminated with sodium dichromate to prevent the chemical from reaching the groundwater and eventually the Columbia River.

203

EM Employs Innovative Technology to Remove Radioactive Sludge | Department  

Broader source: Energy.gov (indexed) [DOE]

Employs Innovative Technology to Remove Radioactive Sludge Employs Innovative Technology to Remove Radioactive Sludge EM Employs Innovative Technology to Remove Radioactive Sludge September 1, 2012 - 12:00pm Addthis Testing and equipment simulations ensure first-of-a-kind technological processes for sludge removal can be conducted safely and efficiently. Testing and equipment simulations ensure first-of-a-kind technological processes for sludge removal can be conducted safely and efficiently. RICHLAND, Wash. - The Richland Operations Office and contractor CH2M HILL Plateau Remediation Company successfully removed a portion of a highly radioactive sludge from underwater storage in a large basin adjacent to the K West reactor at the Hanford site this month. In that milestone, workers removed sludge originating from knock-out pots,

204

NETL: Gasification Systems - Warm Gas Multi-Contaminant Removal System  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Warm Gas Multi-Contaminant Removal System Warm Gas Multi-Contaminant Removal System Project Number: DE-SC00008243 TDA Research, Inc. is developing a high-capacity, low-cost sorbent that removes anhydrous ammonia (NH3), mercury (Hg), and trace contaminants from coal- and coal/biomass-derived syngas. The clean-up system will be used after the bulk warm gas sulfur removal step, and remove NH3 and Hg in a regenerable manner while irreversibly capturing all other trace metals (e.g., Arsenic, Selenium) reducing their concentrations to sub parts per million (ppm) levels. Current project plans include identifying optimum chemical composition and structure that provide the best sorbent performance for removing trace contaminants, determining the effect of operating parameters, conducting multiple-cycle experiments to test the life of the sorbent for NH3 and Hg removal, and conducting a preliminary design of the sorbent reactor.

205

Hanford Deep Dig Removes Contaminated Soil | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Hanford Deep Dig Removes Contaminated Soil Hanford Deep Dig Removes Contaminated Soil Hanford Deep Dig Removes Contaminated Soil March 11, 2013 - 12:00pm Addthis An aerial view of Hanford’s D Area shows the D Reactor (lower left) and DR Reactor. Workers are digging 85 feet to groundwater at two sites there to remove chromium contamination. An aerial view of Hanford's D Area shows the D Reactor (lower left) and DR Reactor. Workers are digging 85 feet to groundwater at two sites there to remove chromium contamination. Workers remove soil contaminated with sodium dichromate to prevent the chemical from reaching the groundwater and eventually the Columbia River. Workers remove soil contaminated with sodium dichromate to prevent the chemical from reaching the groundwater and eventually the Columbia River.

206

Regenerable Hydrogen Chloride Removal Sorbent and Regenerable Multifunctional Hydrogen Sulfide and Hydrogen Chloride Removal Sorbent for High Temperature Gas Streams  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Hydrogen Chloride and Hydrogen Sulfide Hydrogen Chloride and Hydrogen Sulfide Removal Sorbents for High Temperature Gas Streams Opportunity The Department of Energy's National Energy Technology Laboratory (NETL) is seeking licensing partners interested in implementing United States Patent Number 7,767,000 entitled "Regenerable Hydrogen Chloride Removal Sorbent and Regenerable Multifunctional Hydrogen Sulfide and Hydrogen Chloride Removal Sorbent for High Temperature Gas Streams." Disclosed in this patent is the invention of a unique regenerable sorbent process that can remove contaminants from gas produced by the gasification of fossil fuels. Specifically, the process removes hydrogen chloride by using the regenerable sorbent and simultaneously extracts hydrogen chloride compounds and hydrogen

207

Categorical Exclusion 4566, Ash Removal Project  

Broader source: Energy.gov (indexed) [DOE]

FOrnI FOrnI Project Title: Ash Removal Project (4566) Program or Program Office: Y -12 Site Office Location: Oak Ridge Tennessee Project Description: This work scope is to split, containerize, package, transport and disposition one hundred and two (102) cans of mixed waste. General Administration/Management OA I - Routine business actions OA2 * Administrative contract amendments OA4 - Interpretations/rulings for existing regulations OA5 - Regulatory interpretations without environmental effect OA6 - Procedural rule makings upgrade OA 7 - Transfer of property, use unchanged OA8 . Award of technical supportlM&O/personal service contracts OA9 - Info gathering, analysis, documentation, dissemination, and training OA 10 - Reports on non-DOE legislation OA II -

208

AX Tank Farm tank removal study  

SciTech Connect (OSTI)

This report considers the feasibility of exposing, demolishing, and removing underground storage tanks from the 241-AX Tank Farm at the Hanford Site. For the study, it was assumed that the tanks would each contain 360 ft{sup 3} of residual waste (corresponding to the one percent residual Inventory target cited in the Tri-Party Agreement) at the time of demolition. The 241-AX Tank Farm is being employed as a ''strawman'' in engineering studies evaluating clean and landfill closure options for Hanford single-shell tank farms. The report is one of several reports being prepared for use by the Hanford Tanks Initiative Project to explore potential closure options and to develop retrieval performance evaluation criteria for tank farms.

SKELLY, W.A.

1998-10-14T23:59:59.000Z

209

Removing sulphur oxides from a fluid stream  

DOE Patents [OSTI]

A process for removing sulphur oxides from a fluid stream, such as flue gas, comprising: providing a non-aqueous absorption liquid containing at least one hydrophobic amine, the liquid being incompletely miscible with water; treating the fluid stream in an absorption zone with the non-aqueous absorption liquid to transfer at least part of the sulphur oxides into the non-aqueous absorption liquid and to form a sulphur oxide-hydrophobic amine-complex; causing the non-aqueous absorption liquid to be in liquid-liquid contact with an aqueous liquid whereby at least part of the sulphur oxide-hydrophobic amine-complex is hydrolyzed to release the hydrophobic amine and sulphurous hydrolysis products, and at least part of the sulphurous hydrolysis products is transferred into the aqueous liquid; separating the aqueous liquid from the non-aqueous absorption liquid. The process mitigates absorbent degradation problems caused by sulphur dioxide and oxygen in flue gas.

Katz, Torsten; Riemann, Christian; Bartling, Karsten; Rigby, Sean Taylor; Coleman, Luke James Ivor; Lail, Marty Alan

2014-04-08T23:59:59.000Z

210

Roadmap: Technical and Applied Studies -Computer Technology Applied Computer Security and Forensics Technology -Bachelor of Technical and Applied Studies  

E-Print Network [OSTI]

Roadmap: Technical and Applied Studies - Computer Technology Applied Computer Security (2.000) grade. #12;Roadmap: Technical and Applied Studies - Computer Technology Applied Computer and Forensics Technology - Bachelor of Technical and Applied Studies RE-BTAS-TAS-CTAC Regional College Catalog

Khan, Javed I.

211

Nevada applied ecology group publications  

SciTech Connect (OSTI)

Since January 1972, the Nevada Applied Ecology Information Center (NAEIC), Information Research and Analysis Section, Health and Safety Research Division, Oak Ridge National Laboratory, has provided technical information support to the Nevada Applied Ecology Group (NAEG) relevant to the behavior of specific radionuclides, primarily plutonium and americium, in the environment, with special emphasis on pathways to man. This bibliography represents a summary of the biomedical and environmental studies conducted by the NAEG and its contractors. The bibliography focuses on research sponsored by the NAEG. Subject areas of the publications include cover studies of soil, vegetation, animals, microorganisms, resuspension, and meteorology. All references in this publication are stored in a computerized form that is readily available for searches upon request to NAEG and it contractors. 558 refs.

Chilton, B.D.; Pfuderer, H.A.; Cox, T.L. (Oak Ridge National Lab., TN (USA))

1989-09-01T23:59:59.000Z

212

NO removal by reducing agents and additives in the selective non-catalytic reduction (SNCR) process  

Science Journals Connector (OSTI)

The effect of the additives on the selective non-catalytic reduction (SNCR) reaction has been determined in a three-stage laboratory scale reactor. The optimum reaction temperature is lowered and the reaction temperature window is widened with increasing concentrations of the gas additives (CO, CH4). The optimum reaction temperature is lowered and the maximum NO removal efficiency decreases with increasing the concentration of alcohol additives (CH3OH, C2H5OH). The addition of phenol lowers the optimum reaction temperature about 100150C similar to that of the toluene addition. The volatile organic compounds (VOCs: C6H5OH, C7H8) can be utilized in the SNCR process to enhance NO reduction and removed at the same time. A previously proposed simple kinetic model can successfully apply the NO reduction by NH3 and the present additives.

Sang Wook Bae; Seon Ah Roh; Sang Done Kim

2006-01-01T23:59:59.000Z

213

Magnetic Process For Removing Heavy Metals From Water Employing Magnetites  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Magnetic Process For Removing Heavy Metals From Water Employing Magnetic Process For Removing Heavy Metals From Water Employing Magnetites Magnetic Process For Removing Heavy Metals From Water Employing Magnetites A process for removing heavy metals from water is provided. The process includes the steps of introducing magnetite to a quantity of water containing heavy metal. Available for thumbnail of Feynman Center (505) 665-9090 Email Magnetic Process For Removing Heavy Metals From Water Employing Magnetites A process for removing heavy metals from water is provided. The process includes the steps of introducing magnetite to a quantity of water containing heavy metal. The magnetite is mixed with the water such that at least a portion of, and preferably the majority of, the heavy metal in the water is bound to the magnetite. Once this occurs the magnetite and

214

Oak Ridge Removes Laboratory's Greatest Source of Groundwater  

Broader source: Energy.gov (indexed) [DOE]

Oak Ridge Removes Laboratory's Greatest Source of Groundwater Oak Ridge Removes Laboratory's Greatest Source of Groundwater Contamination Oak Ridge Removes Laboratory's Greatest Source of Groundwater Contamination May 1, 2012 - 12:00pm Addthis Workers remove the 4,000-gallon Tank W-1A, which was ORNL’s greatest source of groundwater contamination. Workers remove the 4,000-gallon Tank W-1A, which was ORNL's greatest source of groundwater contamination. Workers load boxes containing contaminated soil that surrounded Tank W-1A. Workers load boxes containing contaminated soil that surrounded Tank W-1A. The 6,500-pound Tank W-1A is shipped away from ORNL. The 6,500-pound Tank W-1A is shipped away from ORNL. Workers remove the 4,000-gallon Tank W-1A, which was ORNL's greatest source of groundwater contamination. Workers load boxes containing contaminated soil that surrounded Tank W-1A.

215

NETL: News Release - Innovative Mercury Removal Technique Shows Early  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

August 5, 2003 August 5, 2003 Innovative Mercury Removal Technique Shows Early Promise Photochemical Process Developed in Federal Lab Removes Mercury from Flue Gas - NETL scientist Evan Granite prepares a lab test of the UV mercury removal process. - NETL scientist Evan Granite prepares for a lab test of the UV mercury removal process. MORGANTOWN, WV - A promising technology to remove mercury from coal-fired power plants -- dubbed the "GP-254 Process" -- has been developed and is currently being tested at the Department of Energy's National Energy Technology Laboratory (NETL). Newly patented, the GP-254 Process enhances mercury removal using ultraviolet light to induce various components of power plant stack gas to react with the mercury, and changes the

216

Oak Ridge Removes Laboratory's Greatest Source of Groundwater  

Broader source: Energy.gov (indexed) [DOE]

Oak Ridge Removes Laboratory's Greatest Source of Groundwater Oak Ridge Removes Laboratory's Greatest Source of Groundwater Contamination Oak Ridge Removes Laboratory's Greatest Source of Groundwater Contamination May 1, 2012 - 12:00pm Addthis Workers remove the 4,000-gallon Tank W-1A, which was ORNL’s greatest source of groundwater contamination. Workers remove the 4,000-gallon Tank W-1A, which was ORNL's greatest source of groundwater contamination. Workers load boxes containing contaminated soil that surrounded Tank W-1A. Workers load boxes containing contaminated soil that surrounded Tank W-1A. The 6,500-pound Tank W-1A is shipped away from ORNL. The 6,500-pound Tank W-1A is shipped away from ORNL. Workers remove the 4,000-gallon Tank W-1A, which was ORNL's greatest source of groundwater contamination. Workers load boxes containing contaminated soil that surrounded Tank W-1A.

217

ADVANCES IN HEXAVALENT CHROMIUM REMOVAL AT HANFORD  

SciTech Connect (OSTI)

At the Hanford Site, chromium was used as a corrosion inhibitor in the reactor cooling water and was introduced into the groundwater as a result of planned and unplanned discharges from reactors during plutonium production since 1944. Beginning in 1995, groundwater treatment methods were evaluated leading to the use of pump and treat facilities with ion exchange using Dowex 21 K, a regenerable strong base anion exchange resin. This required regeneration of the resin, which is currently performed offsite. Resin was installed in a 4 vessel train, with resin removal required from the lead vessel approximately once a month. In 2007, there were 8 trains (32 vessels) in operation. In 2008, DOE recognized that regulatory agreements would require significant expansion in the groundwater chromium treatment capacity. Previous experience from one of the DOE project managers led to identification of a possible alternative resin, and the contractor was requested to evaluate alternative resins for both cost and programmatic risk reductions. Testing was performed onsite in 2009 and 2010, using a variety of potential resins in two separate facilities with groundwater from specific remediation sites to demonstrate resin performance in the specific groundwater chemistry at each site. The testing demonstrated that a weak base anion single-use resin, ResinTech SIR-700, was effective at removing chromium, had a significantly higher capacity, could be disposed of efficiently on site, and would eliminate the complexities and programmatic risks from sampling, packaging, transportation and return of resin for regeneration. This resin was installed in Hanford's newest groundwater treatment facility, called 100-DX, which began operations in November, 2010, and used in a sister facility, 100-HX, which started up in September of 2011. This increased chromium treatment capacity to 25 trains (100 vessels). The resin is also being tested in existing facilities that utilize Dowex 21 K for conversion to the new resin. This paper will describe the results of the testing, performance in the facilities, continued optimization in the pump and treat facilities, and the estimated savings and non-tangible benefits of the conversion.

NESHEM DO; RIDDELLE J

2012-01-30T23:59:59.000Z

218

Master of Science in Applied Educational Psychology  

E-Print Network [OSTI]

Master of Science in Applied Educational Psychology Distance Education Program A 36-credit hour distance education Selected Courses in Applied Educational Psychology Courses offered via distance education for the Applied Educational Psychology program are taught by faculty with esteemed national

Tennessee, University of

219

Assistant Professor Position In Applied Social Psychology  

E-Print Network [OSTI]

Assistant Professor Position In Applied Social Psychology Applied Social Psychology Program Department of Psychology Colorado State University Job Description and Qualifications The Department of Psychology at Colorado State University invites applications for one tenure- track position in Applied Social

220

Applying Quantum Principles to Psychology  

E-Print Network [OSTI]

This article starts out with a detailed example illustrating the utility of applying quantum probability to psychology. Then it describes several alternative mathematical methods for mapping fundamental quantum concepts (such as state preparation, measurement, state evolution) to fundamental psychological concepts (such as stimulus, response, information processing). For state preparation, we consider both pure states and densities with mixtures. For measurement, we consider projective measurements and positive operator valued measurements. The advantages and disadvantages of each method with respect to applications in psychology are discussed.

Jerome R Busemeyer; Zheng Wang; Andrei Khrennikov; Irina Basieva

2014-05-25T23:59:59.000Z

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

19, 2012 19, 2012 CX-009638: Categorical Exclusion Determination Replacement, Removal, and Closure of Underground Storage Tanks CX(s) Applied: B2.5, B6.1 Date: 11/19/2012 Location(s): Tennessee, California, California, Virginia Offices(s): Oak Ridge Office November 19, 2012 CX-009637: Categorical Exclusion Determination Removing Items or Materials Containing Polychlorinated Biphenyls CX(s) Applied: B1.17 Date: 11/19/2012 Location(s): Tennessee, California, California, Virginia Offices(s): Oak Ridge Office November 19, 2012 CX-009636: Categorical Exclusion Determination Ventilation Activities CX(s) Applied: B1.4, B1.16, B2.1, B2.3 Date: 11/19/2012 Location(s): Tennessee, California, California, Virginia Offices(s): Oak Ridge Office November 19, 2012 CX-009544: Categorical Exclusion Determination

222

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

6, 2012 6, 2012 CX-008983: Categorical Exclusion Determination Heliostat System with Wireless Closed-Loop Control CX(s) Applied: B3.6 Date: 08/06/2012 Location(s): California Offices(s): Golden Field Office August 3, 2012 CX-009223: Categorical Exclusion Determination CH2MHill Plateau Remediation Company - Asbestos Removal Actions CX(s) Applied: B1.16 Date: 08/03/2012 Location(s): Washington Offices(s): River Protection-Richland Operations Office August 3, 2012 CX-009052: Categorical Exclusion Determination Remove the Highpoint VAMP ED-641000-IT-RISH-6097A From Service CX(s) Applied: B2.2 Date: 08/03/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office August 3, 2012 CX-009093: Categorical Exclusion Determination Knolls Laboratory Q14 Sprinkler System Upgrade Project

223

Categorical Exclusion Determinations: Tennessee | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

November 19, 2012 November 19, 2012 CX-009638: Categorical Exclusion Determination Replacement, Removal, and Closure of Underground Storage Tanks CX(s) Applied: B2.5, B6.1 Date: 11/19/2012 Location(s): Tennessee, California, California, Virginia Offices(s): Oak Ridge Office November 19, 2012 CX-009637: Categorical Exclusion Determination Removing Items or Materials Containing Polychlorinated Biphenyls CX(s) Applied: B1.17 Date: 11/19/2012 Location(s): Tennessee, California, California, Virginia Offices(s): Oak Ridge Office November 19, 2012 CX-009636: Categorical Exclusion Determination Ventilation Activities CX(s) Applied: B1.4, B1.16, B2.1, B2.3 Date: 11/19/2012 Location(s): Tennessee, California, California, Virginia Offices(s): Oak Ridge Office November 19, 2012 CX-009652: Categorical Exclusion Determination

224

Categorical Exclusion Determinations: Washington | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

September 21, 2011 September 21, 2011 CX-006842: Categorical Exclusion Determination Removal of the 204-AR Facility Diesel Generator and Associated Underground 550 Gallon Fuel Tank CX(s) Applied: B6.1 Date: 09/21/2011 Location(s): Richland, Washington Office(s): River Protection-Richland Operations Office September 21, 2011 CX-006842: Categorical Exclusion Determination Removal of the 204-AR Facility Diesel Generator and Associated Underground 550 Gallon Fuel Tank CX(s) Applied: B6.1 Date: 09/21/2011 Location(s): Richland, Washington Office(s): River Protection-Richland Operations Office September 20, 2011 CX-007036: Categorical Exclusion Determination Puget Sound Clean Cities Petroleum Reduction Project - North Service Center CX(s) Applied: B5.1 Date: 09/20/2011 Location(s): Seattle, Washington

225

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

09640: Categorical Exclusion Determination 09640: Categorical Exclusion Determination Communications, Computing, and Data Processing Activities CX(s) Applied: B1.7, B4.7 Date: 11/19/2012 Location(s): Tennessee, California, California, Virginia Offices(s): Oak Ridge Office November 19, 2012 CX-009638: Categorical Exclusion Determination Replacement, Removal, and Closure of Underground Storage Tanks CX(s) Applied: B2.5, B6.1 Date: 11/19/2012 Location(s): Tennessee, California, California, Virginia Offices(s): Oak Ridge Office November 19, 2012 CX-009637: Categorical Exclusion Determination Removing Items or Materials Containing Polychlorinated Biphenyls CX(s) Applied: B1.17 Date: 11/19/2012 Location(s): Tennessee, California, California, Virginia Offices(s): Oak Ridge Office November 19, 2012 CX-009636: Categorical Exclusion Determination

226

Page not found | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

11 - 27220 of 28,904 results. 11 - 27220 of 28,904 results. Download CX-007167: Categorical Exclusion Determination Rogers-Coolidge Danger Tree Removal CX(s) Applied: B1.3 Date: 02/18/2010 Location(s): Pinal County, Arizona Office(s): Western Area Power Administration-Desert Southwest Region http://energy.gov/nepa/downloads/cx-007167-categorical-exclusion-determination Download CX-007168: Categorical Exclusion Determination Rodgers-Cooolidge Structure Maintenance CX(s) Applied: B1.3 Date: 08/26/2011 Location(s): Pinal County, Arizona Office(s): Western Area Power Administration-Desert Southwest Region http://energy.gov/nepa/downloads/cx-007168-categorical-exclusion-determination Download CX-007170: Categorical Exclusion Determination Saguaro-Tucson Vegetation Removal CX(s) Applied: B1.3 Date: 03/30/2010

227

Colorado | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

August 25, 2011 August 25, 2011 CX-006511: Categorical Exclusion Determination Improving Fuel Efficiency through Innovative Tire Design and Materials CX(s) Applied: A9 Date: 08/25/2011 Location(s): Golden, Colorado Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory August 24, 2011 CX-006591: Categorical Exclusion Determination Invasive Species Removal and Reclamation in Gold Eagle Mining, Incorporated CX(s) Applied: B1.3, B1.20 Date: 08/24/2011 Location(s): San Miguel County, Colorado Office(s): Legacy Management August 17, 2011 ICEIWG Kick-Off Meeting Participant List August 16, 2011 CX-006540: Categorical Exclusion Determination Wells Fargo Property Structure Removal CX(s) Applied: B1.23 Date: 08/16/2011 Location(s): Golden, Colorado Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

228

Categorical Exclusion Determinations: New Mexico | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

September 12, 2011 September 12, 2011 CX-006855: Categorical Exclusion Determination Rocket Centrifuge Removal (Eastern Side of TA-II) CX(s) Applied: B1.23 Date: 09/12/2011 Location(s): Albuquerque, New Mexico Office(s): NNSA-Headquarters, Golden Field Office September 6, 2011 CX-006864: Categorical Exclusion Determination Building 840 Office Relocation, Heat Treating Equipment Removal, and Fire Protection Upgrades CX(s) Applied: B1.3, B1.16, B2.1 Date: 09/06/2011 Location(s): Albuquerque, New Mexico Office(s): NNSA-Headquarters, Golden Field Office September 6, 2011 CX-006857: Categorical Exclusion Determination Building 840 Seismic Code Upgrades CX(s) Applied: B1.15, B2.1 Date: 09/06/2011 Location(s): Albuquerque, New Mexico Office(s): NNSA-Headquarters, Sandia Site Office August 24, 2011

229

Thiacrown polymers for removal of mercury from waste streams  

DOE Patents [OSTI]

Thiacrown polymers immobilized to a polystyrene-divinylbenzene matrix react with Hg.sup.2+ under a variety of conditions to efficiently and selectively remove Hg.sup.2+ ions from acidic aqueous solutions, even in the presence of a variety of other metal ions. The mercury can be recovered and the polymer regenerated. This mercury removal method has utility in the treatment of industrial wastewater, where a selective and cost-effective removal process is required.

Baumann, Theodore F. (Tracy, CA); Reynolds, John G. (San Ramon, CA); Fox, Glenn A. (Livermore, CA)

2002-01-01T23:59:59.000Z

230

Removal of radioactive and other hazardous material from fluid waste  

DOE Patents [OSTI]

Hollow glass microspheres obtained from fly ash (cenospheres) are impregnated with extractants/ion-exchangers and used to remove hazardous material from fluid waste. In a preferred embodiment the microsphere material is loaded with ammonium molybdophosphonate (AMP) and used to remove radioactive ions, such as cesium-137, from acidic liquid wastes. In another preferred embodiment, the microsphere material is loaded with octyl(phenyl)-N-N-diisobutyl-carbamoylmethylphosphine oxide (CMPO) and used to remove americium and plutonium from acidic liquid wastes.

Tranter, Troy J. (Idaho Falls, ID); Knecht, Dieter A. (Idaho Falls, ID); Todd, Terry A. (Aberdeen, ID); Burchfield, Larry A. (W. Richland, WA); Anshits, Alexander G. (Krasnoyarsk, RU); Vereshchagina, Tatiana (Krasnoyarsk, RU); Tretyakov, Alexander A. (Zheleznogorsk, RU); Aloy, Albert S. (St. Petersburg, RU); Sapozhnikova, Natalia V. (St. Petersburg, RU)

2006-10-03T23:59:59.000Z

231

Dust removal in radio-frequency plasmas by a traveling potential modulation  

SciTech Connect (OSTI)

The dust contamination in plasma deposition processes plays a crucial role in the quality and the yield of the products. To improve the quality and the yield of plasma processing, a favorable way is to remove the dust particles actively from the plasma reactors.Our recent experiments in the striped electrode device show that a traveling plasma modulation allows for a systematic particle removal independent of the reactor size. Besides the rf powered electrode, the striped electrode device includes a segmented electrode that consists of 100 electrically insulated narrow stripes. A traveling potential profile is produced by the modulation of the voltage signals applied on the stripes. The dust particles are trapped in the potential wells and transported with the traveling of the potential profile.The particle-in-cell (PIC) simulation on the potential above the segmented electrode indicates that the traveling potential profile can be realized either by applying low-frequency (0.1-10 Hz) voltage signals with a fixed phase shift between adjacent stripes or high-frequency (10 kHz a circumflex AS 100 MHz) signals with the amplitudes modulated by a low-frequency envelope. The transportation of the dust particles is simulated with a two-dimensional molecular dynamics (MD) code with the potential profile obtained from the PIC simulation. The MD results reproduce the experimental observations successfully.This technology allows for an active removal of the contaminating particles in processing plasmas and it is independent of the reactor size. The removal velocity is controllable by adjusting the parameters for the modulation.

Li Yangfang; Jiang Ke; Thomas, Hubertus M.; Morfill, Gregor E. [Max-Planck-Institute for Extraterrestrial Physics, 85748 Garching (Germany)

2010-06-16T23:59:59.000Z

232

EGR Cooler Fouling- Visualization of Deposition and Removal Mechanis  

Broader source: Energy.gov [DOE]

Presents experimental data on exhaust gas recirculation(EGR) cooler fouling using new test apparatus that allows for in-situ observation of deposition and removal processes

233

Method of removal of sulfur from coal and petroleum products  

DOE Patents [OSTI]

A method for the removal of sulfur from sulfur-bearing materials such as coal and petroleum products using organophosphine and organophosphite compounds is provided.

Verkade, John G. (Ames, IA); Mohan, Thyagarajan (Ames, IA); Angelici, Robert J. (Ames, IA)

1995-01-01T23:59:59.000Z

234

REMOVAL OF THE CALIFORNIUM SOURCES FROM THE 222-S LABORATORY  

SciTech Connect (OSTI)

This document develops a proposal for removal of 2-Californium sources from the 222-S Laboratory. Included in this document are assessments of shipping packages and decay calculations.

LINSTRUM D; BAUNE HL

2009-07-23T23:59:59.000Z

235

Process to remove rare earth from IFR electrolyte  

DOE Patents [OSTI]

The invention is a process for the removal of rare earths from molten chloride electrolyte salts used in the reprocessing of integrated fast reactor fuel (IFR). The process can be used either continuously during normal operation of the electrorefiner or as a batch process. The process consists of first separating the actinide values from the salt before purification by removal of the rare earths. After replacement of the actinides removed in the first step, the now-purified salt electrolyte has the same uranium and plutonium concentration and ratio as when the salt was removed from the electrorefiner.

Ackerman, J.P.; Johnson, T.R.

1992-01-01T23:59:59.000Z

236

Heavy metals removal from oil sludge using ion exchange textiles.  

E-Print Network [OSTI]

??In this research, ion exchange textiles were used for the first time for the removal of heavy metals from oil sludge. The target metals which (more)

Muslat, Ziyad

2005-01-01T23:59:59.000Z

237

Searching West Virginia for a Democratic Response to Mountaintop Removal.  

E-Print Network [OSTI]

??Mountaintop removal is an aggressive form of strip mining practiced almost exclusively in Central Appalachia, and since 1977 has been regulated by state and federal (more)

Darrow, Robert

2010-01-01T23:59:59.000Z

238

Y-12 Removes Nuclear Materials from Two Facilities to Reduce...  

National Nuclear Security Administration (NNSA)

Removes Nuclear Materials from Two Facilities to Reduce Site's Nuclear Footprint (Alpha 5 and 9720-38 No Longer Designated as Nuclear Facilities) | National Nuclear Security...

239

Performance evaluation of organic emulsion liquid membrane on phenol removal  

E-Print Network [OSTI]

The percentage removal of phenol from aqueous solution by emulsion liquid membrane and emulsion leakage was investigated experimentally for various parameters such as membrane:internal phase ratio, membrane:external phase ratio, emulsification speed, emulsification time, carrier concentration, surfactant concentration and internal agent concentration. These parameters strongly influence the percentage removal of phenol and emulsion leakage. Under optimum membrane properties, the percentage removal of phenol was as high as 98.33%, with emulsion leakage of 1.25%. It was also found that the necessity of carrier for enhancing phenol removal was strongly dependent on the internal agent concentration.

Ng, Y S; Hashim, M A

2014-01-01T23:59:59.000Z

240

Phosphorus Removal and Recovery from Wastewater using Magnetite.  

E-Print Network [OSTI]

?? The aim of this work was to study the possibilities of using magnetite for phosphorus removal and recovery from wastewater. It was also aimed (more)

Panasiuk, Oleksander

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

SEPARATION OF HEAVY METALS: REMOVAL FROM INDUSTRIAL WASTEWATERS  

Office of Scientific and Technical Information (OSTI)

a two- or three-stage operation to remove the metals and 0il sepcrately). ComplexationSequestration Complexation involves the formation of a complex or chelating agent....

242

Process to remove rare earth from IFR electrolyte  

DOE Patents [OSTI]

The invention is a process for the removal of rare earths from molten chloride electrolyte salts used in the reprocessing of integrated fast reactor fuel (IFR). The process can be used either continuously during normal operation of the electrorefiner or as a batch process. The process consists of first separating the actinide values from the salt before purification by removal of the rare earths. After replacement of the actinides removed in the first step, the now-purified salt electrolyte has the same uranium and plutonium concentration and ratio as when the salt was removed from the electrorefiner. 1 fig.

Ackerman, J.P.; Johnson, T.R.

1994-08-09T23:59:59.000Z

243

Study of Alternative Approaches for Transite Panel Removal |...  

Broader source: Energy.gov (indexed) [DOE]

(BJC) assembled an experienced team from both sites to evaluate both the manual and mechanical methods of transite panel removal. Study of Alternative Approaches for Transite...

244

Widget:RemovePDFImageDimensions | Open Energy Information  

Open Energy Info (EERE)

from PDF images. This is a temporary measure until PdfHandler extension properly gets landscapeportrait dimensions from PDF files. Usage: Widget:RemovePDFImageDimensions...

245

Removal of Carbon Tetrachloride from a Layered Porous Medium...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Carbon Tetrachloride from a Layered Porous Medium by Means of Soil Vapor Extraction Enhanced by Desiccation and Water Removal of Carbon Tetrachloride from a Layered Porous Medium...

246

Removal of carbon tetrachloride from a layered porous medium...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

carbon tetrachloride from a layered porous medium by means of soil vapor extraction enhanced by desiccation and water Removal of carbon tetrachloride from a layered porous medium...

247

Method of removing oxidized contaminants from water  

DOE Patents [OSTI]

The present invention is a method for removing oxidized contaminant(s) from water. More specifically, the invention has the steps of contacting water containing the oxidized contaminant(s) with a layered aluminosilicate having Fe(II). The aluminosilicate may contain naturally occurring Fe(II), or the Fe(II) may be produced by reducing Fe(III) that is initially present. Reduction may be either by exposure to a chemical or biological reductant. Contacting the water containing oxidized contaminant(s) may be by (1) injection of Fe(II)-containing layered aluminosilicate, via a well, into a saturated zone where it is likely to intercept the contaminated water; (2) injection of contaminated water into a vessel containing the Fe(II)-bearing layered aluminosilicate; and (3) first reducing Fe(III) in the layered aluminosilicate to Fe(II) by injection of a biological or chemical reductant, into an aquifer or vessel having sufficient Fe(III)-bearing aluminosilicate to produce the necessary Fe(II). 8 figs.

Amonette, J.E.; Fruchter, J.S.; Gorby, Y.A.; Cole, C.R.; Cantrell, K.J.; Kaplan, D.I.

1998-07-21T23:59:59.000Z

248

Method of removing oxidized contaminants from water  

DOE Patents [OSTI]

The present invention is a method for removing oxidized contaminant(s) from water. More specifically, the invention has the steps of contacting water containing the oxidized contaminant(s) with a layered aluminosilicate having Fe(II). The aluminosilicate may contain naturally occurring Fe(II), or the Fe(II) may be produced by reducing Fe(III) that is initially present. Reduction may be either by exposure to a chemical or biological reductant. Contacting the water containing oxidized contaminant(s) may be by (1) injection of Fe(II)-containing layered aluminosilicate, via a well, into a saturated zone where it is likely to intercept the contaminated water; (2) injection of contaminated water into a vessel containing the Fe(II)-bearing layered aluminosilicate; and (3) first reducing Fe(III) in the layered aluminosilicate to Fe(II) by injection of a biological or chemical reductant, into an aquifer or vessel having sufficient Fe(III)-bearing aluminosilicate to produce the necessary Fe(II).

Amonette, James E. (Richland, WA); Fruchter, Jonathan S. (Richland, WA); Gorby, Yuri A. (Richland, WA); Cole, Charles R. (West Richmond, WA); Cantrell, Kirk J. (West Richmond, WA); Kaplan, Daniel I. (Richland, WA)

1998-01-01T23:59:59.000Z

249

Heavy metal removal and recovery using microorganisms  

SciTech Connect (OSTI)

Microorganisms -- bacteria, fungi, and microalgae -- can accumulate relatively large amounts of toxic heavy metals and radionuclides from the environment. These organisms often exhibit specificity for particular metals. The metal content of microbial biomass can be a substantial fraction of total dry weight with concentration factors (metal in dry biomass to metal in solution) exceeding one million in some cases. Both living and inert (dead) microbial biomass can be used to reduce heavy metal concentrations in contaminated waters to very low levels -- parts per billion and even lower. In many respects (e.g. specificity, residual metal concentrations, accumulation factors, and economics) microbial bioremoval processes can be superior to conventional processes, such as ion exchange and caustic (lime or hydroxide) precipitation for heavy metals removal from waste and contaminated waters. Thus, bioremoval could be developed to contribute to the clean-up of wastes at the Savannah River Site (SRS) and other DOE facilities. However, the potential advantages of bioremoval processes must still be developed into practical operating systems. A detailed review of the literature suggests that appropriate bioremoval processes could be developed for the SRS. There is great variability from one biomass source to another in bioremoval capabilities. Bioremoval is affected by pH, other ions, temperature, and many other factors. The biological (living vs. dead) and physical (immobilized vs. dispersed) characteristics of the biomass also greatly affect metal binding. Even subtle differences in the microbial biomass, such as the conditions under which it was cultivated, can have major effects on heavy metal binding.

Wilde, E.W. (Westinghouse Savannah River Co., Aiken, SC (United States)); Benemann, J.R. (Benemann (J.R.), Pinole, CA (United States))

1991-02-01T23:59:59.000Z

250

The washability of lignites for clay removal  

SciTech Connect (OSTI)

In the washability research of the Seyitomer Lignites (Kutahya-Turkey), with lower calorific value (1,863 kcal/kg) and high ash content (51.91%), by heavy medium separation, it was found out that middling clay in the coal had an effect to change the medium density. To prevent this problem, a trommel sieve with 18 and 5 mm aperture diameter was designed, and the clay in the coal was tried to be removed using it before the coal was released to heavy medium. Following that, the obtained coal in -100 + 18 mm and -18 + 5 mm fractions was subjected to sink and float test having 1.4 gcm{sup -3} and 1.7 gcm{sup -3} medium densities (-5 mm fraction will be evaluated in a separate work). Depending on the raw coal, with the floating of -100 + 18 mm and -18 + 5 mm size fraction in 1.4 gcm{sup -3} medium density, clean coal with 60.10% combustible matter recovery, 19.12% ash, and 3,150 kcal/kg was obtained. Also floating of the samples sinking in 1.4 gcm{sup -3} in the medium density (1.7 gcm{sup -3}), middling with 18.70% combustible matter recovery, 41.93% ash, 2,150 kcal/kg, and tailing having 78.31% ash were obtained.

Oteyaka, B.; Yamik, A.; Ucar, A.; Sahbaz, O.; Demir, U. [Dumlupinar University, Kutahya (Turkey). Dept. of Mining Engineering

2008-07-01T23:59:59.000Z

251

Metagenomic analysis of phosphorus removing sludgecommunities  

SciTech Connect (OSTI)

Enhanced Biological Phosphorus Removal (EBPR) is not wellunderstood at the metabolic level despite being one of the best-studiedmicrobially-mediated industrial processes due to its ecological andeconomic relevance. Here we present a metagenomic analysis of twolab-scale EBPR sludges dominated by the uncultured bacterium, "CandidatusAccumulibacter phosphatis." This analysis resolves several controversiesin EBPR metabolic models and provides hypotheses explaining the dominanceof A. phosphatis in this habitat, its lifestyle outside EBPR and probablecultivation requirements. Comparison of the same species from differentEBPR sludges highlights recent evolutionary dynamics in the A. phosphatisgenome that could be linked to mechanisms for environmental adaptation.In spite of an apparent lack of phylogenetic overlap in the flankingcommunities of the two sludges studied, common functional themes werefound, at least one of them complementary to the inferred metabolism ofthe dominant organism. The present study provides a much-needed blueprintfor a systems-level understanding of EBPR and illustrates thatmetagenomics enables detailed, often novel, insights into evenwell-studied biological systems.

Garcia Martin, Hector; Ivanova, Natalia; Kunin, Victor; Warnecke,Falk; Barry, Kerrie; McHardy, Alice C.; Yeates, Christine; He, Shaomei; Salamov, Asaf; Szeto, Ernest; Dalin, Eileen; Putnam, Nik; Shapiro, HarrisJ.; Pangilinan, Jasmyn L.; Rigoutsos, Isidore; Kyrpides, Nikos C.; Blackall, Linda Louise; McMahon, Katherine D.; Hugenholtz, Philip

2006-02-01T23:59:59.000Z

252

Weatherization and Intergovernmental Program: Apply for Weatherization  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Apply Apply for Weatherization Assistance to someone by E-mail Share Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Facebook Tweet about Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Twitter Bookmark Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Google Bookmark Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Delicious Rank Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on Digg Find More places to share Weatherization and Intergovernmental Program: Apply for Weatherization Assistance on AddThis.com... Plans, Implementation, & Results Weatherization Assistance Program Weatherization Services

253

Carbon dioxide removal and capture for landfill gas up-grading  

Science Journals Connector (OSTI)

Within the frame of an EC financially supported project - LIFE05 ENV/IT/000874 GHERL (Greenhouse Effect Reduction from Landfill)a pilot plant was set up in order to demonstrate the feasibility of applying chemical absorption to remove carbon dioxide from landfill gas. After proper upgrading - basically removal of carbon dioxide, hydrogen sulphide, ammonia and other trace gas compoundthe gas might be fed into the distribution grid for natural gas or used as vehicle fuel, replacing a fossil fuel thus saving natural resources and carbon dioxide emissions. Several experiences in Europe have been carried out concerning the landfill gas - and biogas from anaerobic digestion - quality up-grading through CO2 removal, but in all of them carbon dioxide was vented to the atmosphere after separation, without any direct benefit in terms of greenhouse gases reduction. With respect to those previous experiences, in this work the attention was focused on CO2 removal from landfill gas with an effective capture process, capable of removing carbon dioxide from atmosphere, through a globally carbon negative process. In particular, processes capable of producing final solid products were investigated, with the aim of obtaining as output solid compounds which can be either used in the chemical industry or disposed off. The adopted absorption process is based on using aqueous solutions of potassium hydroxide, with the final aim of producing potassium carbonate. Potassium carbonate is a product which has several applications in the chemical industry if obtained with adequate quality. It can be sold as a pulverised solid, or in aqueous solution. Several tests were carried out at the pilot plant, which was located at a landfill site, in order to feed it with a fraction of the on-site collected landfill gas. The results of the experimental campaign are reported, explained and commented in the paper. Also a discussion on economic issues is presented.

Lidia Lombardia; Andrea Corti; Ennio Carnevale; Renato Baciocchi; Daniela Zingaretti

2011-01-01T23:59:59.000Z

254

REMOVAL OF ORGANIC POLLUTANTS FROM SUBCRITICAL WATER WITH ACTIVATED CARBON  

SciTech Connect (OSTI)

The Energy & Environmental Research Center (EERC) has demonstrated that controlling the temperature (and to a lesser extent, the pressure) of water can dramatically change its ability to extract organics and inorganics from matrices ranging from soils and sediments to waste sludges and coal. The dielectric constant of water can be changed from about 80 (a very polar solvent) to <5 (similar to a nonpolar organic solvent) by controlling the temperature (from ambient to about 400 C) and pressure (from about 5 to 350 bar). The EERC has shown that hazardous organic pollutants such as pesticides, PACS (polycyclic aromatic hydrocarbons), and PCBs (polychlorinated biphenyls) can be completely removed from soils, sludges, and sediments at temperatures (250 C) and pressures (<50 atm) that are much milder than typically used for supercritical water processes (temperature >374 C, pressure >221 atm). In addition, the process has been demonstrated to be particularly effective for samples containing very high levels of contaminants (e.g., part per thousand). Current projects include demonstrating the subcritical water remediation process at the pilot scale using an 8-liter system constructed under separate funding during 1997. To date, subcritical water has been shown to be an effective extraction fluid for removing a variety of organic pollutants from soils and sludges contaminated with fossil fuel products and waste products, including PACS from soil (e.g., town gas sites), refining catalysts, and petroleum tank bottom sludges; PCBs from soil and sediments; toxic gasoline components (e.g., benzene) from soil and waste sludge; and phenols from petroleum refinery sludges. The obvious need to clean the wastewater from subcritical water processes led to preliminary experiments with activated carbon placed in line after the extractor. Initial experiments were performed before and after cooling the extractant water (e.g., with water at 200 C and with water cooled to 25 C). Surprisingly, the ability of activated carbon to remove organics from the water is better at a high temperature than at room temperature. These initial results are opposite to those expected from chromatographic theory, since the solubility of the organics is about 100,000-fold higher in the hot water than in ambient water. At present, the physicochemical mechanism accounting for these results is unknown; however, it is possible that the lower surface tension and lower viscosity of subcritical water (compared to water at ambient conditions) greatly increases the available area of the carbon by several orders of magnitude. Regardless of the mechanism involved, the optimal use of activated carbon to clean the wastewater generated from subcritical water remediation will depend on obtaining a better understanding of the controlling parameters. While these investigations focused on the cleanup of wastewater generated from subcritical water remediation, the results also apply to cleanup of any wastewater contaminated with nonpolar and moderately polar organics such as wastewaters from coal and petroleum processing.

Steven B. Hawthorne; Arnaud J. Lagadec

1999-08-01T23:59:59.000Z

255

Applied Materials | Open Energy Information  

Open Energy Info (EERE)

Materials Materials Jump to: navigation, search Name Applied Materials Address 3050 Bowers Avenue Place Santa Clara, California Zip 95054 Sector Solar Stock Symbol AMAT Website http://www.appliedmaterials.co Coordinates 37.3775749°, -121.9794416° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.3775749,"lon":-121.9794416,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

256

NDE Studies on CRDMs Removed From Service  

SciTech Connect (OSTI)

Studies being conducted at the Pacific Northwest National Laboratory (PNNL) in Richland, Washington are focused on assessing the effectiveness of NDE inspections of control rod drive mechanism (CRDM) nozzles and J-groove weldments. The primary objective of this work is to provide information to the United States Nuclear Regulatory Commission (US NRC) on the effectiveness of ultrasonic testing (UT) and eddy current testing (ET) as related to the in-service inspection of CRDM nozzles and J-groove weldments, and to enhance the knowledge base of primary water stress corrosion cracking (PWSCC) through destructive characterization of the CRDM assemblies. In describing two CRDM assemblies removed from service, decontaminated, and then used in a series of NDE measurements, this paper will address the following questions: 1) What did each technique detect?, 2) What did each technique miss?, 3) How accurately did each technique characterize the detected flaws? Two CRDM assemblies including the CRDM nozzle, the J-groove weld, buttering, and a portion of the ferritic head material were selected for this study. One contained suspected PWSCC, based on in-service inspection data; the other contained evidence suggesting through-wall leakage, but this was unconfirmed. The selected NDE measurements follow standard industry techniques for conducting in-service inspections of CRDM nozzles and the crown of the J-groove welds and buttering. In addition, laboratory based NDE methods will be employed to conduct inspections of the CRDM assemblies, with particular emphasis on inspecting the J-groove weld and buttering. This paper will also describe the NDE methods used and discus the NDE results. Future work will involve using the results from these NDE studies to guide the development of a destructive characterization plan to reveal the crack morphology, to be compared with NDE responses.

Doctor, Steven R.; Cumblidge, Stephen E.; Schuster, George J.; Hockey, Ronald L.; Abrefah, John

2005-12-31T23:59:59.000Z

257

Removal and recovery of metal ions from process and waste streams using polymer filtration  

SciTech Connect (OSTI)

Polymer Filtration (PF) is an innovative, selective metal removal technology. Chelating, water-soluble polymers are used to selectively bind the desired metal ions and ultrafiltration is used to concentrate the polymer-metal complex producing a permeate with low levels of the targeted metal ion. When applied to the treatment of industrial metal-bearing aqueous process streams, the permeate water can often be reused within the process and the metal ions reclaimed. This technology is applicable to many types of industrial aqueous streams with widely varying chemistries. Application of PF to aqueous streams from nuclear materials processing and electroplating operations will be described.

Jarvinen, G.D.; Smith, B.F.; Robison, T.W.; Kraus, K.M.; Thompson, J.A.

1999-06-13T23:59:59.000Z

258

Efficient Node Overlap Removal Using a Proximity Stress Model  

E-Print Network [OSTI]

Efficient Node Overlap Removal Using a Proximity Stress Model Emden R. Gansner and Yifan Hu AT the structural information inherent in a layout using little additional area. This paper presents a new node overlap removal algorithm that does well by these measures. 1 Introduction Most existing symmetric graph

Hu, Yifan

259

Microsoft PowerPoint - DOE Tank Removal Study Vinces presentation...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sketch Deep Soil Excavation Page 3-3 of RPP-RPT-47167 Soil removal to 5 feet below tanks Soil removal to 5 feet below tanks 5 5 19,700 Ci Cs 137 5 feet below tank 25,100 Ci Cs...

260

Removal of heavy metals from samples of residual sludge  

Science Journals Connector (OSTI)

Nitric acid leaching processes were evaluated for removal of heavy metals from samples of residual sludge from an industrial and municipal wastewater plant. The study showed that an acid:water ratio of 1:1 and a nitric acid concentration of 2 mol 1?1 gave efficient removal of 86.7%, 100% and 100% of copper, nickel and arsenic.

Jose Abrego

1996-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Removal of residual particulate matter from filter media  

DOE Patents [OSTI]

A method for removing residual filter cakes that remain adhered to a filter after typical particulate removal methodologies have been employed, such as pulse-jet filter element cleaning, for all cleanable filters used for air pollution control, dust control, or powder control.

Almlie, Jay C; Miller, Stanley J

2014-11-11T23:59:59.000Z

262

Atmospheric Environment 41 (2007) 31513160 Ozone removal by HVAC filters  

E-Print Network [OSTI]

Atmospheric Environment 41 (2007) 3151­3160 Ozone removal by HVAC filters P. Zhao, J.A. Siegel?, R May 2006; accepted 14 June 2006 Abstract Residential and commercial HVAC filters that have been loaded of the relative importance of HVAC filters as a removal mechanism for ozone in residential and commercial

Siegel, Jeffrey

263

Aluminum Removal from Photographic Waste Submitted to Dr. Tony Bi  

E-Print Network [OSTI]

Aluminum Removal from Photographic Waste Submitted to Dr. Tony Bi By: Kristen Favel, Tiffany Jung, and Kenny Tam CHBE 484 University of British Columbia April 15, 2009 #12;ii "Aluminum Removal from photographic waste has shown elevated levels of aluminum in the fixer, which exceed sewer discharge standards

264

Fuzzy predictive control for nitrogen removal in biological wastewater treatment  

E-Print Network [OSTI]

Fuzzy predictive control for nitrogen removal in biological wastewater treatment S. Marsili wastewater is too low, full denitrification is difficult to obtain and an additional source of organic carbon predictive control; wastewater treatment plant Introduction The problem of improving the nitrogen removal

265

Continuous cryopump with a method for removal of solidified gases  

DOE Patents [OSTI]

An improved cryopump for the removal of gases from a high vacuum, comprising a cryopanel incorporating honeycomb structure, refrigerant means thermally connected to the cryopanel, and a rotatable channel moving azimuthally around an axis located near the center of the cryopanel, removing gases adsorbed within the honeycomb structure by subliming them and conducting them outside the vacuum vessel. 4 figs.

Carlson, L.W.; Herman, H.

1988-05-05T23:59:59.000Z

266

Savannah River Site Removes Dome, Opening Reactor for Recovery Act  

Broader source: Energy.gov (indexed) [DOE]

Savannah River Site Removes Dome, Opening Reactor for Recovery Act Savannah River Site Removes Dome, Opening Reactor for Recovery Act Decommissioning Savannah River Site Removes Dome, Opening Reactor for Recovery Act Decommissioning American Recovery and Reinvestment Act workers achieved a significant milestone in the decommissioning of a Cold War reactor at the Savannah River Site this month after they safely removed its rusty, orange, 75-foot-tall dome. With the help of a 660-ton crane and lifting lugs, the workers pulled the 174,000-pound dome off the Heavy Water Components Test Reactor, capping more than 16 months of preparations. Savannah River Site Removes Dome, Opening Reactor for Recovery Act Decommissioning More Documents & Publications Recovery Act Changes Hanford Skyline with Explosive Demolitions Recovery Act Workers Add Time Capsule Before Sealing Reactor for Hundreds

267

Removal of radionuclides in drinking water by membrane treatment using ultrafiltration, reverse osmosis and electrodialysis reversal  

Science Journals Connector (OSTI)

A pilot plant had been built to test the behaviour of ultrafiltration (UF), reverse osmosis (RO), and electrodialysis reversal (EDR) in order to improve the quality of the water supplied to Barcelona metropolitan area from the Llobregat River. This paper presents results from two studies to reduce natural radioactivity. The results from the pilot plant with four different scenarios were used to design the full-scale treatment plant built (SJD WTP). The samples taken at different steps of the treatment were analysed to determine gross alpha, gross beta and uranium activity. The results obtained revealed a significant improvement in the radiological water quality provided by both membrane techniques (RO and EDR showed removal rates higher than 60%). However, UF did not show any significant removal capacity for gross alpha, gross beta or uranium activities. RO was better at reducing the radiological parameters studied and this treatment was selected and applied at the full scale treatment plant. The RO treatment used at the SJD WTP reduced the concentration of both gross alpha and gross beta activities and also produced water of high quality with an average removal of 95% for gross alpha activity and almost 93% for gross beta activity at the treatment plant.

M. Montaa; A. Camacho; I. Serrano; R. Devesa; L. Matia; I. Valls

2013-01-01T23:59:59.000Z

268

The Development of a Parameterized Scatter Removal Algorithm for Nuclear Materials Identification System Imaging  

SciTech Connect (OSTI)

This dissertation presents a novel method for removing scattering effects from Nuclear Materials Identification System (NMIS) imaging. The NMIS uses fast neutron radiography to generate images of the internal structure of objects non-intrusively. If the correct attenuation through the object is measured, the positions and macroscopic cross-sections of features inside the object can be determined. The cross sections can then be used to identify the materials and a 3D map of the interior of the object can be reconstructed. Unfortunately, the measured attenuation values are always too low because scattered neutrons contribute to the unattenuated neutron signal. Previous efforts to remove the scatter from NMIS imaging have focused on minimizing the fraction of scattered neutrons which are misidentified as directly transmitted by electronically collimating and time tagging the source neutrons. The parameterized scatter removal algorithm (PSRA) approaches the problem from an entirely new direction by using Monte Carlo simulations to estimate the point scatter functions (PScFs) produced by neutrons scattering in the object. PScFs have been used to remove scattering successfully in other applications, but only with simple 2D detector models. This work represents the first time PScFs have ever been applied to an imaging detector geometry as complicated as the NMIS. By fitting the PScFs using a Gaussian function, they can be parameterized and the proper scatter for a given problem can be removed without the need for rerunning the simulations each time. In order to model the PScFs, an entirely new method for simulating NMIS measurements was developed for this work. The development of the new models and the codes required to simulate them are presented in detail. The PSRA was used on several simulated and experimental measurements and chi-squared goodness of fit tests were used to compare the corrected values to the ideal values that would be expected with no scattering. Using the PSRA resulted in an improvement of the chi-squared test by a factor of 60 or more when applied to simple homogeneous objects.

Grogan, Brandon R [ORNL

2010-03-01T23:59:59.000Z

269

THE DEVELOPMENT OF A PARAMETERIZED SCATTER REMOVAL ALGORITHM FOR NUCLEAR MATERIALS IDENTIFICATION SYSTEM IMAGING  

SciTech Connect (OSTI)

This report presents a novel method for removing scattering effects from Nuclear Materials Identification System (NMIS) imaging. The NMIS uses fast neutron radiography to generate images of the internal structure of objects nonintrusively. If the correct attenuation through the object is measured, the positions and macroscopic cross sections of features inside the object can be determined. The cross sections can then be used to identify the materials, and a 3D map of the interior of the object can be reconstructed. Unfortunately, the measured attenuation values are always too low because scattered neutrons contribute to the unattenuated neutron signal. Previous efforts to remove the scatter from NMIS imaging have focused on minimizing the fraction of scattered neutrons that are misidentified as directly transmitted by electronically collimating and time tagging the source neutrons. The parameterized scatter removal algorithm (PSRA) approaches the problem from an entirely new direction by using Monte Carlo simulations to estimate the point scatter functions (PScFs) produced by neutrons scattering in the object. PScFs have been used to remove scattering successfully in other applications, but only with simple 2D detector models. This work represents the first time PScFs have ever been applied to an imaging detector geometry as complicated as the NMIS. By fitting the PScFs using a Gaussian function, they can be parameterized, and the proper scatter for a given problem can be removed without the need for rerunning the simulations each time. In order to model the PScFs, an entirely new method for simulating NMIS measurements was developed for this work. The development of the new models and the codes required to simulate them are presented in detail. The PSRA was used on several simulated and experimental measurements, and chi-squared goodness of fit tests were used to compare the corrected values to the ideal values that would be expected with no scattering. Using the PSRA resulted in an improvement of the chi-squared test by a factor of 60 or more when applied to simple homogeneous objects.

Grogan, Brandon R [ORNL

2010-05-01T23:59:59.000Z

270

Duct Remediation Program: Material characterization and removal/handling  

SciTech Connect (OSTI)

Remediation efforts were successfully performed at Rocky Flats to locate, characterize, and remove plutonium holdup from process exhaust ducts. Non-Destructive Assay (NDA) techniques were used to determine holdup locations and quantities. Visual characterization using video probes helped determine the physical properties of the material, which were used for remediation planning. Assorted equipment types, such as vacuum systems, scoops, brushes, and a rotating removal system, were developed to remove specific material types. Personnel safety and material handling requirements were addressed throughout the project.

Beckman, T.d.; Davis, M.M.; Karas, T.M.

1992-11-01T23:59:59.000Z

271

CX-011231: Categorical Exclusion Determination  

Broader source: Energy.gov [DOE]

Hayden Communications Site Tower Removal and Parking Area Grading Routt County, Colorado CX(s) Applied: B1.3, B1.19 Date: 10/01/2013 Location(s): Colorado Offices(s): Western Area Power Administration-Rocky Mountain Region

272

CX-010418: Categorical Exclusion Determination  

Broader source: Energy.gov [DOE]

Eastern Colorado Field Office Com Buildings Removal CX(s) Applied: B1.22, B1.23, B1.24 Date: 05/20/2013 Location(s): Colorado, Wyoming, Wyoming Offices(s): Western Area Power Administration-Rocky Mountain Region

273

CX-012199: Categorical Exclusion Determination  

Broader source: Energy.gov [DOE]

Abandon Five Test Holes and Remove Contaminated Soils from Associated Well Pads at the Chariot, Alaska Site CX(s) Applied: B3.1, B6.1 Date: 05/15/2014 Location(s): Alaska Offices(s): Legacy Management

274

CX-010544: Categorical Exclusion Determination  

Broader source: Energy.gov [DOE]

Glen Canyon Switchyard - 230 Kilovolt Wavetrap Removal - TZ9A2 on the Navajo Line CX(s) Applied: B4.11 Date: 06/21/2013 Location(s): Arizona Offices(s): Western Area Power Administration-Desert Southwest Region

275

How to Apply for the ENERGY STAR  

Broader source: Energy.gov [DOE]

Join us to learn about applying for ENERGY STAR Certification in Portfolio Manager. Understand the value of the ENERGY STAR certification, see the step-by-step process of applying, and gain tips to...

276

Roadmap: Technical and Applied Studies Computer Technology Applied Computer Security and Forensics Technology  

E-Print Network [OSTI]

Roadmap: Technical and Applied Studies ­ Computer Technology Applied Computer Security-division credit hours #12;Roadmap: Technical and Applied Studies ­ Computer Technology Applied Computer Security and Forensics Technology ­ Bachelor of Technical and Applied Studies [RE-BTAS-TAS-CTAC] Regional College Catalog

Sheridan, Scott

277

Method of applying a cerium diffusion coating to a metallic alloy  

DOE Patents [OSTI]

A method of applying a cerium diffusion coating to a preferred nickel base alloy substrate has been discovered. A cerium oxide paste containing a halide activator is applied to the polished substrate and then dried. The workpiece is heated in a non-oxidizing atmosphere to diffuse cerium into the substrate. After cooling, any remaining cerium oxide is removed. The resulting cerium diffusion coating on the nickel base substrate demonstrates improved resistance to oxidation. Cerium coated alloys are particularly useful as components in a solid oxide fuel cell (SOFC).

Jablonski, Paul D. (Salem, OR); Alman, David E. (Benton, OR)

2009-06-30T23:59:59.000Z

278

Master of Science in Applied Educational Psychology  

E-Print Network [OSTI]

Master of Science in Applied Educational Psychology Distance Education Program A 36-credit hour settings. Selected Courses in Applied Educational Psychology Courses offered via distance education for the Applied Educational Psychology program are taught by faculty with esteemed national and international

Tennessee, University of

279

SYLLABUS--GEOGRAPHY (GEOG)-455 APPLIED CLIMATOLOGY  

E-Print Network [OSTI]

SYLLABUS--GEOGRAPHY (GEOG)-455 APPLIED CLIMATOLOGY Spring 2006 Time: T-R 12:30-1:45 p.m. (BOL B95-455-001-lec@uwm.edu Textbooks: Thompson-Perry, Applied Climatology: principles and practice, (1997, graduate students will prepare a 10 page (2500 word minimum) paper on a project using applied climatology

Saldin, Dilano

280

Department of Applied Physics Introductory Handbook  

E-Print Network [OSTI]

Department of Applied Physics Introductory Handbook Version 2009-05-29 #12;2 Phone: +46 (0) 8 5537 8102 www.aphys.kth.se Visiting address Roslagstullsbacken 21 Delivery address KTH Applied Physics AlbaNova University Center Roslagsvägen 30B 114 19 Stockholm Postal address KTH Applied Physics AlbaNova University

Haviland, David

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

United States, International Partners Remove Last Remaining Weapons-Usable  

Broader source: Energy.gov (indexed) [DOE]

States, International Partners Remove Last Remaining States, International Partners Remove Last Remaining Weapons-Usable Highly Enriched Uranium from Hungary, Set Nuclear Security Milestone United States, International Partners Remove Last Remaining Weapons-Usable Highly Enriched Uranium from Hungary, Set Nuclear Security Milestone November 4, 2013 - 2:09pm Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON - The U.S. Department of Energy today announced under a multi-year international effort coordinated between Hungary, the United States, the Russian Federation, and the International Atomic Energy Agency (IAEA), the successful removal of all remaining highly enriched uranium (HEU) from Hungary. This makes Hungary the twelfth country to completely eliminate HEU from its borders since President Obama's 2009 announcement

282

Multi-component Removal in Flue Gas by Aqua Ammonia  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

component Removal in Flue Gas by Aqua Ammonia component Removal in Flue Gas by Aqua Ammonia Opportunity The Department of Energy's National Energy Technology Laboratory is seeking licensing partners interested in implementing United States Patent Number 7,255,842 entitled "Multi-component Removal in Flue Gas by Aqua Ammonia." This patent discloses a method for the removal of potential environmental-impacting compounds from flue gas streams. The method oxidizes some or all of the acid precursors such as sulfur dioxide (SO 2 ) and nitric oxides (NO x ) into sulfur trioxide and nitrogen dioxide, respectively. Following this step, the gas stream is then treated with aqua ammonia or ammonium hydroxide to capture the compounds via chemical absorption through acid-base or neutralization reactions where a fertilizer is formed.

283

Preliminary Evaluation of Removing Used Nuclear Fuel From Shutdown Sites |  

Broader source: Energy.gov (indexed) [DOE]

Evaluation of Removing Used Nuclear Fuel From Shutdown Evaluation of Removing Used Nuclear Fuel From Shutdown Sites Preliminary Evaluation of Removing Used Nuclear Fuel From Shutdown Sites In January 2013, the Department of Energy issued the Strategy for the Management and Disposal of Used Nuclear Fuel and High-Level Radioactive Waste. Among the elements contained in this strategy is an initial focus on accepting used nuclear fuel from shutdown reactor sites. This focus is consistent with the recommendations of the Blue Ribbon Commission on America's Nuclear Future, which identified removal of stranded used nuclear fuel at shutdown sites as a priority so that these sites may be completely decommissioned and put to other beneficial uses. Shutdown sites are defined as those commercial nuclear power reactor sites where the

284

Natural Convection Shutdown Heat Removal Test Facility (NSTF)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Natural Convection Natural Convection Shutdown Heat Removal Test Facility Scaling Basis Full Scale Half Scale NSTF Argonne National Laboratory's Natural Convection Shutdown Heat Removal Test Facility (NSTF) - one of the world's largest facilities for ex-vessel passive decay heat removal testing-confirms the performance of reactor cavity cooling systems (RCCS) and similar passive confinement or containment decay heat removal systems in modern Small Modular Reactors. Originally built to aid in the development of General Electric's Power Reactor Innovative Small Module (PRISM) Reactor Vessel Auxiliary Cooling System (RVACS), the NSTF has a long history of providing confirmatory data for the airside of the RVACS. Argonne National Laboratory's NSTF is a state-of-the-art, large-scale facility for evaluating performance

285

Building Removal Ongoing at DOE's Paducah Site | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Building Removal Ongoing at DOE's Paducah Site Building Removal Ongoing at DOE's Paducah Site Building Removal Ongoing at DOE's Paducah Site August 23, 2012 - 12:00pm Addthis Media Contact Buz Smith Robert.Smith@lex.doe.gov 270-441-6821 PADUCAH, KY - Work is ongoing at the Paducah Gaseous Diffusion Plant (PGDP) to raze a 65,000-square-foot facility known as the C-340 Metals Plant, which was used to make uranium metal during the Cold War. Department of Energy (DOE) cleanup contractor LATA Environmental Services of Kentucky began removing more than 1,500 panels of cement-asbestos siding from the Metals Plant complex Wednesday in anticipation of New Jersey-based LVI Services starting demolition Sept. 19. Demolition work is projected to last through the end of calendar 2012. "This is an important milestone because the C-340 Metals Plant is the

286

Moab Project Continues Progress on Tailings Removal with Contract  

Broader source: Energy.gov (indexed) [DOE]

Moab Project Continues Progress on Tailings Removal with Contract Moab Project Continues Progress on Tailings Removal with Contract Transition Moab Project Continues Progress on Tailings Removal with Contract Transition December 27, 2012 - 12:00pm Addthis Laborers place a disposable liner in a tailings container. Laborers place a disposable liner in a tailings container. MOAB, Utah - The Moab mill tailings removal project in Utah ended the year having shipped more than 35 percent of the total 16 million tons of uranium mill tailings off-site. The tailings are being transported by rail 30 miles north to a disposal cell for permanent storage. More than 1 million tons of tailings were shipped during fiscal year 2012, which closed at the end of September. The Moab Project also successfully transitioned both of its prime contracts

287

Thief Process Removal of Mercury from Flue Gas  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Process for the Removal of Mercury from Flue Gas Process for the Removal of Mercury from Flue Gas Opportunity The Department of Energy's National Energy Technology Laboratory (NETL) is seeking licensing partners interested in implementing United States Patent Number 6,521,021 entitled "Thief Process for the Removal of Mercury from Flue Gas." Disclosed in this patent is a novel process in which partially combusted coal is removed from the combustion chamber of a power plant using a lance (called a "thief"). This partially combusted coal acts as a thermally activated adsorbent for mercury. When it is in- jected into the duct work of the power plant downstream from the exit port of the combustion chamber, mercury within the flue gas contacts and adsorbs onto the thermally activated sorbent. The sorbent-mercury

288

Moab Project Continues Progress on Tailings Removal with Contract  

Broader source: Energy.gov (indexed) [DOE]

Moab Project Continues Progress on Tailings Removal with Contract Moab Project Continues Progress on Tailings Removal with Contract Transition Moab Project Continues Progress on Tailings Removal with Contract Transition December 27, 2012 - 12:00pm Addthis Laborers place a disposable liner in a tailings container. Laborers place a disposable liner in a tailings container. MOAB, Utah - The Moab mill tailings removal project in Utah ended the year having shipped more than 35 percent of the total 16 million tons of uranium mill tailings off-site. The tailings are being transported by rail 30 miles north to a disposal cell for permanent storage. More than 1 million tons of tailings were shipped during fiscal year 2012, which closed at the end of September. The Moab Project also successfully transitioned both of its prime contracts

289

Operability test procedure [Tank] 241-SY-101 equipment removal system  

SciTech Connect (OSTI)

The 241-SY-101 equipment removal system (ERS) consists of components, equipment, instrumentation and procedures that will provide the means to disconnect, retrieve, contain, load and transport the Mitigation Pump Assembly (MPA) from waste Tank 241-SY-101 to the Central Waste Complex (CWC). The Operability Test Procedure (OTP) will test the interfaces between ERS components and will rehearse the procedure for MPA removal and transportation to the extent they can be mocked-up at the CTF (Cold Test Facility). At the conclusion of the OTP, the ERS components and equipment will be removed from the CTF, entered into the Component Based Recall System (CBRS), and stored until needed for actual MPA removal and transportation.

Mast, J.C.

1994-12-08T23:59:59.000Z

290

Removal of phenanthrene from soil by additive-enhanced electrokinetics  

Science Journals Connector (OSTI)

Removal of hydrophobic organic contaminants (HOCs) using an additive-enhanced electrokinetic method was studied in a ... (EK) column experiments were performed using these additives. When no additive was used, a

Ji-Yeon Park; Yan Chen; Jian Chen; Ji-Won Yang

2002-03-01T23:59:59.000Z

291

Method to Remove Uranium/Vanadium Contamination from Groundwater  

DOE Patents [OSTI]

A process for removing uranium/vanadium-based contaminants from groundwater using a primary in-ground treatment media and a pretreatment media that chemically adjusts the groundwater contaminant to provide for optimum treatment by the primary treatment media.

Metzler, Donald R.; Morrison Stanley

2004-07-27T23:59:59.000Z

292

Oil and Gas- Leases to remove or recover (Pennsylvania)  

Broader source: Energy.gov [DOE]

This act states that a lease or agreement conveying the right to remove or recover oil, natural gas or gas of any other designation from lessor to lessee shall not be valid if such lease does not...

293

Unsupervised One-Class Learning for Automatic Outlier Removal  

Science Journals Connector (OSTI)

Outliers are pervasive in many computer vision and pattern recognition problems. Automatically eliminating outliers scattering among practical data collections becomes increasingly important, especially for Internet inspired vision applications. In this ... Keywords: One-Class Learning, Outlier Removal

Wei Liu, Gang Hua, John R. Smith

2014-06-01T23:59:59.000Z

294

Remote target removal for the Oak Ridge 86-inch Cyclotron  

SciTech Connect (OSTI)

A remotely operated target remover has been plaed in operation at the 86-Inch Cyclotron located in Oak Ridge. The system provides for the remote removal of a target from inside the cyclotron, loading it into a cask, and the removal of the cask from the 1.5 m (5-ft) shielding walls. The remote system consists of multiple electrical and pneumatically operated equipment which is designed for controlled step-by-step operation, operated with an electrical control panel, and monitored by a television system. The target remover has reduced the radiation exposures to operating personnel at the facility and has increased the effective operating time. The system is fast, requires a minimum of skill to operate, and has demonstrated both reliability and durability.

Walls, A.A.

1982-01-01T23:59:59.000Z

295

Reconvergent Fanout Removal Through Partial BIST Insertion Ian G. Harris  

E-Print Network [OSTI]

Reconvergent Fanout Removal Through Partial BIST Insertion Ian G. Harris Department of Electrical and Computer Engineering University of Massachusetts at Amherst E-mail: harris@ecs.umass.edu I. ABSTRACT

Harris, Ian G.

296

Layered metal sulfides: Exceptionally selective agents for radioactive strontium removal  

Science Journals Connector (OSTI)

...07 mmol, 40 mg) in water (20 ml), an excess...washed several times with water, acetone, and...Complex Environmental Remediation Problems , ed Blacklick...removal from contaminated ground water and wastewater...

Manolis J. Manos; Nan Ding; Mercouri G. Kanatzidis

2008-01-01T23:59:59.000Z

297

Ozone Removal by Filters Containing Activated Carbon: A Pilot Study  

SciTech Connect (OSTI)

This study evaluated the ozone removal performance of moderate-cost particle filters containing activated carbon when installed in a commercial building heating, ventilating, and air conditioning (HVAC) system. Filters containing 300 g of activated carbon per 0.09 m2 of filter face area were installed in two 'experimental' filter banks within an office building located in Sacramento, CA. The ozone removal performance of the filters was assessed through periodic measurements of ozone concentrations in the air upstream and downstream of the filters. Ozone concentrations were also measured upstream and downstream of a 'reference' filter bank containing filters without any activated carbon. The filter banks with prefilters containing activated carbon were removing 60percent to 70percent of the ozone 67 and 81 days after filter installation. In contrast, there was negligible ozone removal by the reference filter bank without activated carbon.

Fisk, William; Spears, Mike; Sullivan, Douglas; Mendell, Mark

2009-09-01T23:59:59.000Z

298

Membrane Based intensification of ammonia removal from wastewater  

E-Print Network [OSTI]

The aim of this research was to study a novel membrane based oxygen intensification system to enhance a biological wastewater treatment process for ammonia removal. Specifically, this work is concerned with the biological nitrification process which...

Almutairi, Azel

2011-12-31T23:59:59.000Z

299

Transite panel removal begins on K-31 Building  

Broader source: Energy.gov [DOE]

Workers have begun removing transite paneling from the outside of the K-31 Building at East Tennessee Technology Park (ETTP). The 1.49 million ft former gaseous diffusion building was once used to...

300

Arsenic Removal from Groundwater Using Iron Electrocoagulation: Effect of  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Arsenic Removal from Groundwater Using Iron Electrocoagulation: Effect of Arsenic Removal from Groundwater Using Iron Electrocoagulation: Effect of Charge Dosage Rate Title Arsenic Removal from Groundwater Using Iron Electrocoagulation: Effect of Charge Dosage Rate Publication Type Journal Article Refereed Designation Refereed LBNL Report Number LBNL-6221E Year of Publication 2013 Authors Amrose, Susan, Ashok J. Gadgil, Venkat Srinivasan, Kristin Kowolik, Marc Muller, Jessica Huang, and Robert Kostecki Journal Joournal of Environmental Science and Health, Part A: Toxic/Hazardous Substances and Environmental Engineering Volume 48 Issue 9 Pagination 1019-1030 Date Published 04/2013 Keywords arsenic, bangladesh, Cambodia, dosage rate, electrocoagulation, india, water treatment Abstract We demonstrate that electrocoagulation (EC) using iron electrodes can reduce arsenic below 10 μg/L in synthetic Bangladesh groundwater and in real groundwater from Bangladesh and Cambodia while investigating the effect of operating parameters that are often overlooked, such as charge dosage rate. We measure arsenic removal performance

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Highly Radioactive Sludge Removal Complete: Historic Cleanup Effort Reduces  

Broader source: Energy.gov (indexed) [DOE]

Highly Radioactive Sludge Removal Complete: Historic Cleanup Effort Highly Radioactive Sludge Removal Complete: Historic Cleanup Effort Reduces the Risk along the Columbia River Highly Radioactive Sludge Removal Complete: Historic Cleanup Effort Reduces the Risk along the Columbia River September 13, 2012 - 12:00pm Addthis Media Contacts Cameron Salony, DOE Cameron.Salony@rl.doe.gov 509-376-0402 Dee Millikin, CH2M HILL Plateau Remediation Company Dee_Millikin@rl.gov 509-376-1297 RICHLAND, WASH. - The U.S. Department of Energy (DOE) and contractor CH2M HILL Plateau Remediation Company (CH2M HILL) announced today the removal of the first phase of highly radioactive sludge from under water storage in the K West Basin about 400 yards away from the Columbia River. "This is a major step forward in protecting the river and a historic

302

Highly Radioactive Sludge Removal Complete: Historic Cleanup Effort Reduces  

Broader source: Energy.gov (indexed) [DOE]

Highly Radioactive Sludge Removal Complete: Historic Cleanup Effort Highly Radioactive Sludge Removal Complete: Historic Cleanup Effort Reduces the Risk along the Columbia River Highly Radioactive Sludge Removal Complete: Historic Cleanup Effort Reduces the Risk along the Columbia River September 13, 2012 - 12:00pm Addthis Media Contacts Cameron Salony, DOE Cameron.Salony@rl.doe.gov 509-376-0402 Dee Millikin, CH2M HILL Plateau Remediation Company Dee_Millikin@rl.gov 509-376-1297 RICHLAND, WASH. - The U.S. Department of Energy (DOE) and contractor CH2M HILL Plateau Remediation Company (CH2M HILL) announced today the removal of the first phase of highly radioactive sludge from under water storage in the K West Basin about 400 yards away from the Columbia River. "This is a major step forward in protecting the river and a historic

303

Removal Rate Model for Magnetorheological Finishing of Glass  

SciTech Connect (OSTI)

Magnetorheological finishing (MRF) is a deterministic subaperture polishing process. The process uses a magntorheological (MR) fluid that consists of micrometer-sized, spherical, magnetic carbonyl iron (CI) particles, nonmagnetic polishing abrasives, water, and stabilizers. Material removal occurs when the CI and nonmagnetic polishing abrasives shear material off the surface being polished. We introduce a new MRF material removal rate model for glass. This model contains terms for the near surface mechanical properties of glass, drag force, polishing abrasive size and concentration, chemical durability of the glass, MR fluid pH, and the glass composition. We introduce quantitative chemical predictors for the first time, to the best of our knowledge, into an MRF removal rate model. We validate individual terms in our model separately and then combine all of the terms to show the whole MRF material removal model compared with experimental data. All of our experimental data were obtained using nanodiamond MR fluids and a set of six optical glasses.

DeGroote, J.E.; Marino, A.E.; WIlson, J.P.; Bishop, A.L.; Lambropoulos, J.C.; Jacobs, S.D.

2007-11-14T23:59:59.000Z

304

Quantitative study on removal of SU-8 photoresist patterns by supercritical CO2 emulsion  

Science Journals Connector (OSTI)

Supercritical CO"2 emulsion (SCE) was found to be effective in removal of epoxy-type SU-8 photoresist. The ability to remove SU-8 was compared between a commercially available Remover PG (RPG) solution and SCE. Both RPG and SCE were effective in removing ... Keywords: Lithography, SU-8 removal, Supercritical CO2 emulsion

Tso-Fu Mark Chang; Chiemi Ishiyama; Tatsuo Sato; Masato Sone

2013-10-01T23:59:59.000Z

305

Fluidized bed gasification ash reduction and removal process  

DOE Patents [OSTI]

In a fluidized bed gasification system an ash removal system to reduce the particulate ash to a maximum size or smaller, allow the ash to cool to a temperature lower than the gasifier and remove the ash from the gasifier system. The system consists of a crusher, a container containing level probes and a means for controlling the rotational speed of the crusher based on the level of ash within the container.

Schenone, Carl E. (Madison, PA); Rosinski, Joseph (Vanderbilt, PA)

1984-12-04T23:59:59.000Z

306

Fluidized bed gasification ash reduction and removal system  

DOE Patents [OSTI]

In a fluidized bed gasification system an ash removal system to reduce the particulate ash to a maximum size or smaller, allow the ash to cool to a temperature lower than the gasifier and remove the ash from the gasifier system. The system consists of a crusher, a container containing level probes and a means for controlling the rotational speed of the crusher based on the level of ash within the container.

Schenone, Carl E. (Madison, PA); Rosinski, Joseph (Vanderbilt, PA)

1984-02-28T23:59:59.000Z

307

Process for removing heavy metal compounds from heavy crude oil  

DOE Patents [OSTI]

A process is provided for removing heavy metal compounds from heavy crude oil by mixing the heavy crude oil with tar sand; preheating the mixture to a temperature of about 650.degree. F.; heating said mixture to up to 800.degree. F.; and separating tar sand from the light oils formed during said heating. The heavy metals removed from the heavy oils can be recovered from the spent sand for other uses.

Cha, Chang Y. (Golden, CO); Boysen, John E. (Laramie, WY); Branthaver, Jan F. (Laramie, WY)

1991-01-01T23:59:59.000Z

308

Mercury and tritium removal from DOE waste oils  

SciTech Connect (OSTI)

This work covers the investigation of vacuum extraction as a means to remove tritiated contamination as well as the removal via sorption of dissolved mercury from contaminated oils. The radiation damage in oils from tritium causes production of hydrogen, methane, and low-molecular-weight hydrocarbons. When tritium gas is present in the oil, the tritium atom is incorporated into the formed hydrocarbons. The transformer industry measures gas content/composition of transformer oils as a diagnostic tool for the transformers` condition. The analytical approach (ASTM D3612-90) used for these measurements is vacuum extraction of all gases (H{sub 2}, N{sub 2}, O{sub 2}, CO, CO{sub 2}, etc.) followed by analysis of the evolved gas mixture. This extraction method will be adapted to remove dissolved gases (including tritium) from the SRS vacuum pump oil. It may be necessary to heat (60{degrees}C to 70{degrees}C) the oil during vacuum extraction to remove tritiated water. A method described in the procedures is a stripper column extraction, in which a carrier gas (argon) is used to remove dissolved gases from oil that is dispersed on high surface area beads. This method appears promising for scale-up as a treatment process, and a modified process is also being used as a dewatering technique by SD Myers, Inc. (a transformer consulting company) for transformers in the field by a mobile unit. Although some mercury may be removed during the vacuum extraction, the most common technique for removing mercury from oil is by using sulfur-impregnated activated carbon (SIAC). SIAC is currently being used by the petroleum industry to remove mercury from hydrocarbon mixtures, but the sorbent has not been previously tested on DOE vacuum oil waste. It is anticipated that a final process will be similar to technologies used by the petroleum industry and is comparable to ion exchange operations in large column-type reactors.

Klasson, E.T. [Oak Ridge National Lab., TN (United States)

1997-10-01T23:59:59.000Z

309

Removal of deposited copper from nuclear steam generators  

SciTech Connect (OSTI)

A review of the copper-removal process implemented during the cleaning of the NPD nuclear steam generator in Ontario revealed that major shortcomings in the process were depletion of the strong ammonia solution and relatively poor copper removal. Tests have shown that the concentration of the ammonia solution can be preserved close to its initial value, and high concentrations of complexed copper obtained, by sparging the ammonia solution with oxygen recirculating through a gas recirculation loop. Using recirculating oxygen for sparging at ambient air temperature, approximately 11 g/l of copper were dissolved by 100 g/l ammonia solution while the gaseous ammonia content of the recirculating gas remained well below the lower flammability limit. The corrosion rates of mild steel and commonly used nuclear steam generator tube materials in oxygenated ammonia solution were less than 30 mil/yr and no intergranular attack of samples was observed during tests. A second technique studied for the removal of copper is to ammoniate the spent iron-removal solvent to approximately pH 9.5 and sparge with recirculating oxygen. Complexed ferric iron in the spent iron-removal solvent was found to be the major oxidizing agent for metallic copper. The ferric iron can be derived from oxidation of dissolved ferrous iron to the ferric state or from dissolved oxides of iron directly. To extract copper from the secondary sides of nuclear steam generators, strong ammonia solution sparged with recirculating oxygen is recommended as the first stage, while ammoniated spent iron-removal solvent sparged with recirculating oxygen may be used to remove the copper freshly exposed during the removal of iron.

McSweeney, P.

1982-05-01T23:59:59.000Z

310

Radiator debris removing apparatus and work machine using same  

DOE Patents [OSTI]

A radiator assembly includes a finned radiator core and a debris removing apparatus having a compressed air inlet and at least one compressed air outlet configured to direct compressed air through the radiator core. A work machine such as a wheel loader includes a radiator and a debris removing apparatus coupled with on-board compressed air and having at least one pressurized gas outlet configured to direct a gas toward the face of the radiator.

Martin, Kevin L. (Washburn, IL); Elliott, Dwight E. (Chillicothe, IL)

2008-09-02T23:59:59.000Z

311

Organic removal from domestic wastewater by activated alumina adsorption  

E-Print Network [OSTI]

of the major groups of pollutants in wastewaters. Adsorption by granular activated carbon, a non-polar adsorbent, is now the primary treatment process for removal of residual organics from biologically treated wastewater. The ability of activated alumina..., which is a polar adsorbent, to remove total organic carbon (TOC) and some trace organics from domestic wastewater has been evaluated. Batch adsorption experiments were used to investigate the effect of pH and total dissolved solids on activated...

Yang, Pe-Der

2012-06-07T23:59:59.000Z

312

Solid materials for removing arsenic and method thereof  

DOE Patents [OSTI]

Solid materials have been developed to remove arsenic compounds from aqueous media. The arsenic is removed by passing the aqueous phase through the solid materials which can be in molded, granular, or powder form. The solid materials adsorb the arsenic leaving a purified aqueous stream. The materials are aerogels or xerogels and aerogels or xerogels and solid support structure, e.g., granulated activated carbon (GAC), mixtures. The species-specific adsorption occurs through specific chemical modifications of the solids tailored towards arsenic.

Coronado, Paul R. (Livermore, CA); Coleman, Sabre J. (Oakland, CA); Sanner, Robert D. (Livermore, CA); Dias, Victoria L. (Livermore, CA); Reynolds, John G. (San Ramon, CA)

2008-07-01T23:59:59.000Z

313

Reverse osmosis treatment to remove inorganic contaminants from drinking water  

SciTech Connect (OSTI)

The purpose of the research project was to determine the removal of inorganic contaminants from drinking water using several state-of-the-art reverse osmosis membrane elements. A small 5-KGPD reverse osmosis system was utilized and five different membrane elements were studied individually with the specific inorganic contaminants added to several natural Florida ground waters. Removal data were also collected on naturally occurring substances.

Huxstep, M.R.; Sorg, T.J.

1987-12-01T23:59:59.000Z

314

Mixed noise removal by weighted low rank model  

Science Journals Connector (OSTI)

Abstract Mixed noise removal has been a challenging task due to the complex noise distribution. One representative type of mixed noise is the additive white Gaussian noise (AWGN) coupled with impulse noise (IN). Most mixed noise removal methods first detect and restore impulse pixels using median-type filters, and then perform AWGN removal. Such mixed noise removal methods, however, are less effective in preserving image structures, and tend to over-smooth image details. In this paper, we present a novel mixed noise removal method by proposing a weighted low rank model (WLRM). By grouping image nonlocal similar patches as a matrix, we reconstruct the clean image by finding the weighted low rank approximation or representation of the matrix. IN can be well suppressed by the adaptive weight setting, while the image global structure and local edges can be well preserved via the low rank model fitting. The weight setting and low rank model fitting are jointly optimized in WLRM. Our experiments validate that WLRM leads to very promising mixed noise removal results in terms of both quantitative measure and visual perception.

Jielin Jiang; Jian Yang; Yan Cui; Lei Luo

2014-01-01T23:59:59.000Z

315

Removal of BPA by enzyme polymerization using NF membranes  

Science Journals Connector (OSTI)

Abstract The application of laccase and peroxidase from horseradish (HRP) to facilitate the removal of bisphenol A (BPA) from aqueous solutions was investigated. Effect of pH and the enzyme dose was evaluated in order to determine the optimum conditions for the enzyme performance. The results indicate that BPA was quickly removed from aqueous solution since a BPA conversion over 95% was obtained in 180min for both enzymes in optimal conditions; the higher the enzyme dose, the higher the removal percentage of BPA. It was also found that the optimum pH for the removal efficiency of BPA was around 7 for both enzymes. The use of a membrane-reactor integrated system with recycling of enzyme for BPA degradation is also presented. These results demonstrate the potential and limitations of using enzymatic BPA degradation, operated in a recycling mode coupled to a nanofiltration membrane. BPA removal efficiencies for several NF membranes were related to the BPA molecular weight, membrane pore sizes and membrane hydrophobicity. NF270 showed the best performance in membrane-assisted enzyme treatment: 89% removal of BPA for the two enzyme treatments and less than 35% flux decay were observed.

Ivonne Escalona; Joris de Grooth; Josep Font; Kitty Nijmeijer

2014-01-01T23:59:59.000Z

316

Modeling Sustainable Agricultural Residue Removal at the Subfield Scale  

SciTech Connect (OSTI)

This study developed a computational strategy that utilizes data inputs from multiple spatial scales to investigate how variability within individual fields can impact sustainable residue removal for bioenergy production. Sustainable use of agricultural residues for bioenergy production requires consideration of the important role that residues play in limiting soil erosion and maintaining soil C, health, and productivity. Increased availability of subfield-scale data sets such as grain yield data, high-fidelity digital elevation models, and soil characteristic data provides an opportunity to investigate the impacts of subfield-scale variability on sustainable agricultural residue removal. Using three representative fields in Iowa, this study contrasted the results of current NRCS conservation management planning analysis with subfield-scale analysis for rake-and-bale removal of agricultural residue. The results of the comparison show that the field-average assumptions used in NRCS conservation management planning may lead to unsustainable residue removal decisions for significant portions of some fields. This highlights the need for additional research on subfield-scale sustainable agricultural residue removal including the development of real-time variable removal technologies for agricultural residue.

Muth, D.J.; McCorkle, D.S.; Koch, J.B.; Bryden, K.M.

2012-05-02T23:59:59.000Z

317

Categorical Exclusion Determinations: South Carolina | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

January 24, 2012 January 24, 2012 CX-007626: Categorical Exclusion Determination Lapeyre Stair Installation CX(s) Applied: B2.5 Date: 01/24/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office January 24, 2012 CX-007625: Categorical Exclusion Determination Flush Fire Water Distribution Lines to Remove Sediment CX(s) Applied: B1.3 Date: 01/24/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office January 24, 2012 CX-007624: Categorical Exclusion Determination Copper Catalyzed Peroxide Destruction of Tank 48H Tetraphenylborate Wastes CX(s) Applied: B3.6 Date: 01/24/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office January 23, 2012 CX-007973: Categorical Exclusion Determination Concrete Culverts Storage in K-Area

318

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

June 4, 2012 June 4, 2012 CX-008633: Categorical Exclusion Determination Dismantlement and Removal of 321-M Solvent Storage Tank Area Dynamic Underground Stripping (DUS I) Remnants CX(s) Applied: B3.1 Date: 06/04/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office June 4, 2012 CX-008632: Categorical Exclusion Determination Sampling of Soil Vapor Extraction Wells at the Western Sector Dynamic Underground Stripping System CX(s) Applied: B3.1 Date: 06/04/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office June 4, 2012 CX-008482: Categorical Exclusion Determination Composite Riser for Ultra-Deepwater High Pressure Wells CX(s) Applied: A9, A11 Date: 06/04/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory June 4, 2012

319

Categorical Exclusion Determinations: Savannah River Operations Office |  

Broader source: Energy.gov (indexed) [DOE]

November 29, 2012 November 29, 2012 CX-009607: Categorical Exclusion Determination 772-F Low-Activity Drain (LAD) Discharge Header Modification CX(s) Applied: B1.3 Date: 11/29/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office November 29, 2012 CX-008651: Categorical Exclusion Determination Dismantle and Remove (D&R) and Replace 773-A D-Wing Air Handling and Condensing Units CX(s) Applied: B1.3 Date: 05/17/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office November 29, 2012 CX-009608: Categorical Exclusion Determination Refurbish 607-53C Sanitary Sewer Lift Station CX(s) Applied: B1.3 Date: 11/29/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office November 27, 2012 CX-009611: Categorical Exclusion Determination

320

Page not found | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

41 - 6150 of 28,560 results. 41 - 6150 of 28,560 results. Download CX-003642: Categorical Exclusion Determination Removal of the Building 370 Felix Magnet CX(s) Applied: B3.6 Date: 09/02/2010 Location(s): DuPage County, Illinois Office(s): Science, Argonne Site Office http://energy.gov/nepa/downloads/cx-003642-categorical-exclusion-determination Download CX-008722: Categorical Exclusion Determination Reintroduction of Westslope Cutthroat Trout in the Pend Orielle basin CX(s) Applied: B1.20 Date: 05/07/2012 Location(s): Washington Offices(s): Bonneville Power Administration http://energy.gov/nepa/downloads/cx-008722-categorical-exclusion-determination Download CX-008832: Categorical Exclusion Determination Hills Creek-Lookout Point No. 1 Wood Pole Replacements CX(s) Applied: B1.3 Date: 07/19/2012

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Page not found | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

31 - 25940 of 31,917 results. 31 - 25940 of 31,917 results. Download CX-003631: Categorical Exclusion Determination Asbestos Removal in Spent Fuel Project (SFP) Facilities CX(s) Applied: B1.16 Date: 08/10/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-003631-categorical-exclusion-determination Download CX-003632: Categorical Exclusion Determination Analysis of Evaporator Scale Sample CX(s) Applied: B3.6 Date: 08/10/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-003632-categorical-exclusion-determination Download CX-003500: Categorical Exclusion Determination Chenoweth Substation Third Generation (3G) Radio Station Project CX(s) Applied: B1.19 Date: 08/09/2010

322

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

5, 2010 5, 2010 CX-002268: Categorical Exclusion Determination From Sensing to Enhancing the Brain Processes CX(s) Applied: B3.12 Date: 02/25/2010 Location(s): Albuquerque, New Mexico Office(s): NNSA-Headquarters, Sandia Site Office February 24, 2010 CX-006661: Categorical Exclusion Determination Repair Flowline at 83-AX-4 CX(s) Applied: B5.2, B5.4 Date: 02/24/2010 Location(s): Casper, Wyoming Office(s): RMOTC February 24, 2010 CX-001126: Categorical Exclusion Determination 183-2C Removal of Switchgear Cubicle CX(s) Applied: B4.10 Date: 02/24/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office February 24, 2010 CX-000907: Categorical Exclusion Determination Improved Design Tools for Surface Water and Standing Column Well Heat Pump

323

Categorical Exclusion Determinations: B3.6 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

7, 2012 7, 2012 CX-009108: Categorical Exclusion Determination Precipitation of Mixed Actinide Solid Solutions CX(s) Applied: B3.6 Date: 08/27/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office August 27, 2012 CX-009107: Categorical Exclusion Determination Xylene Measurement for Saltstone Antifoams CX(s) Applied: B3.6 Date: 08/27/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office August 27, 2012 CX-008998: Categorical Exclusion Determination "Sustainable Manufacturing via Multi-scale Physics-based Process Modeling and Manufacturing-informed Design CX(s) Applied: A9, B3.6 Date: 08/27/2012 Location(s): Minnesota Offices(s): Golden Field Office" August 27, 2012 CX-009006: Categorical Exclusion Determination High Metal Removal Rate Process for Machining Difficult Materials

324

Page not found | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

91 - 14200 of 28,560 results. 91 - 14200 of 28,560 results. Download CX-008918: Categorical Exclusion Determination Remove/Demolish T-20, T-14, T-15, T-29 CX(s) Applied: B1.23 Date: 08/25/2012 Location(s): West Virginia Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-008918-categorical-exclusion-determination Download CX-008919: Categorical Exclusion Determination West Virginia Super Circuit CX(s) Applied: B4.4 Date: 08/24/2012 Location(s): West Virginia Offices(s): National Energy Technology Laboratory http://energy.gov/nepa/downloads/cx-008919-categorical-exclusion-determination Download CX-008920: Categorical Exclusion Determination West Virginia Super Circuit CX(s) Applied: A9 Date: 08/24/2012 Location(s): West Virginia Offices(s): National Energy Technology Laboratory

325

Categorical Exclusion Determinations: Montana | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

July 26, 2010 July 26, 2010 CX-003263: Categorical Exclusion Determination Montana-Tribe-Blackfeet Tribe CX(s) Applied: B5.1 Date: 07/26/2010 Location(s): Montana Office(s): Energy Efficiency and Renewable Energy July 13, 2010 CX-003037: Categorical Exclusion Determination Mercury Removal from Clean Coal Processing Air Stream CX(s) Applied: B3.6 Date: 07/13/2010 Location(s): Butte, Montana Office(s): Fossil Energy, National Energy Technology Laboratory July 13, 2010 CX-003034: Categorical Exclusion Determination Pacific Northwest Smart Grid Demonstration CX(s) Applied: A1, A9, A11, B1.7, B4.4, B5.1 Date: 07/13/2010 Location(s): Helena, Montana Office(s): Electricity Delivery and Energy Reliability, National Energy Technology Laboratory July 12, 2010 CX-002969: Categorical Exclusion Determination

326

Page not found | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

71 - 27680 of 28,904 results. 71 - 27680 of 28,904 results. Download CX-010309: Categorical Exclusion Determination 730-1B Vehicle Charging Station CX(s) Applied: B1.32 Date: 04/26/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-010309-categorical-exclusion-determination Download CX-010310: Categorical Exclusion Determination Tanks 13 and 15 Soil Samples for Transfer Line Future Design CX(s) Applied: B3.1 Date: 04/26/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-010310-categorical-exclusion-determination Download CX-010311: Categorical Exclusion Determination Tank 7 Center Riser Install/Remove Temporary Isolation Valve V-8 CX(s) Applied: B1.3 Date: 04/26/2013

327

Categorical Exclusion Determinations: Washington | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

January 7, 2013 January 7, 2013 CX-009785: Categorical Exclusion Determination Roosevelt Radio Station Emergency Generator Removal and Replacement CX(s) Applied: B1.3 Date: 01/07/2013 Location(s): Washington Offices(s): Bonneville Power Administration January 3, 2013 CX-010563: Categorical Exclusion Determination Pacific Northwest National Laboratory- Non-Wire Methods for Transmission Congestion Management Through Predictive Simulation and Optimization CX(s) Applied: B3.6 Date: 01/03/2013 Location(s): Washington, North Carolina, Illinois, Oregon Offices(s): Advanced Research Projects Agency-Energy December 27, 2012 CX-009699: Categorical Exclusion Determination Continuation of Yakama Nation Sturgeon Management Project CX(s) Applied: B1.20 Date: 12/27/2012 Location(s): Washington, Washington

328

Categorical Exclusion Determinations: Idaho | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

February 1, 2010 February 1, 2010 CX-000682: Categorical Exclusion Determination Central Facilities Area-696 Power and Plumbing Upgrades CX(s) Applied: B1.7, B2.1 Date: 02/01/2010 Location(s): Idaho Office(s): Idaho Operations Office, Nuclear Energy January 28, 2010 CX-000647: Categorical Exclusion Determination K-12 Energy Efficiency Project CX(s) Applied: B5.1 Date: 01/28/2010 Location(s): Idaho Office(s): Energy Efficiency and Renewable Energy, Golden Field Office December 16, 2009 CX-000282: Categorical Exclusion Determination Removal of Central Facilities Area (CFA)-661 Interior Walls and Mezzanine CX(s) Applied: B1.15 Date: 12/16/2009 Location(s): Idaho Office(s): Idaho Operations Office, Nuclear Energy November 30, 2009 CX-001257: Categorical Exclusion Determination Energy Efficiency Lighting Retrofits and Lighting Control Upgrades,

329

Page not found | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

21 - 17830 of 26,764 results. 21 - 17830 of 26,764 results. Download CX-006540: Categorical Exclusion Determination Wells Fargo Property Structure Removal CX(s) Applied: B1.23 Date: 08/16/2011 Location(s): Golden, Colorado Office(s): Energy Efficiency and Renewable Energy, Golden Field Office http://energy.gov/nepa/downloads/cx-006540-categorical-exclusion-determination Download CX-000194: Categorical Exclusion Determination Ohio City Cincinnati CX(s) Applied: A9, A11, B5.1 Date: 11/18/2009 Location(s): Cincinnati, Ohio Office(s): Energy Efficiency and Renewable Energy, Golden Field Office http://energy.gov/nepa/downloads/cx-000194-categorical-exclusion-determination Download CX-006606: Categorical Exclusion Determination Recoat RPX Spools at Bayou Choctaw CX(s) Applied: B1.3 Date: 08/08/2011

330

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

8, 2010 8, 2010 CX-003698: Categorical Exclusion Determination Green Education CX(s) Applied: A1, A9, B1.2, B5.1 Date: 09/08/2010 Location(s): Maricopa, Arizona Office(s): Energy Efficiency and Renewable Energy September 8, 2010 CX-003681: Categorical Exclusion Determination Nanostructured Solar Cells CX(s) Applied: B3.6 Date: 09/08/2010 Location(s): Little Rock, Arkansas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 8, 2010 CX-003782: Categorical Exclusion Determination Driscoll Substation Radio Tower and Antenna Installation CX(s) Applied: B1.19 Date: 09/08/2010 Location(s): Clatsop County, Oregon Office(s): Bonneville Power Administration September 8, 2010 CX-003780: Categorical Exclusion Determination Installation and Removal of Relays - Port Townsend Paper Company

331

Categorical Exclusion Determinations: Savannah River Operations Office |  

Broader source: Energy.gov (indexed) [DOE]

December 17, 2009 December 17, 2009 CX-000810: Categorical Exclusion Determination Ceramic Synthesis and Gas Permeation Measurements in 735-11A CX(s) Applied: B3.6 Date: 12/17/2009 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office December 17, 2009 CX-000809: Categorical Exclusion Determination Cut, Remove and Replace Off-Gas Exhaust Fan #2 and #3 foundation and Replace Air Monitor Fan #1 and #2 CX(s) Applied: B1.3 Date: 12/17/2009 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office December 17, 2009 CX-000808: Categorical Exclusion Determination Howard T. Ricketts Regional Biocontainment Laboratory 134 CX(s) Applied: B3.6 Date: 12/17/2009 Location(s): Aiken, South Carolina

332

Page not found | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

21 - 8730 of 29,416 results. 21 - 8730 of 29,416 results. Download CX-005110: Categorical Exclusion Determination Actinide Removal Process and Extraction-Scrub-Strip Testing for Macrobatch 4 CX(s) Applied: B3.6 Date: 01/24/2011 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005110-categorical-exclusion-determination Download CX-005111: Categorical Exclusion Determination Sidewalk Extension Between 703-44A and 773-51A CX(s) Applied: B1.3 Date: 01/24/2011 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-005111-categorical-exclusion-determination Download CX-005108: Categorical Exclusion Determination Thin Films for Whisker Growth CX(s) Applied: B3.6 Date: 01/20/2011

333

Categorical Exclusion Determinations: South Carolina | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

June 18, 2012 June 18, 2012 CX-008629: Categorical Exclusion Determination Remove Roof Over the North-east Spill Basin 235-F CX(s) Applied: B1.23 Date: 06/18/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office June 18, 2012 CX-008628: Categorical Exclusion Determination Decommissioning and Demolition (D&D) of 681-11N CX(s) Applied: B1.23 Date: 06/18/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office June 7, 2012 CX-008631: Categorical Exclusion Determination Relocate Handi-House SRS-PB-01318 and Six Sealands from A-Area to N-Area Excess Area CX(s) Applied: B1.22 Date: 06/07/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office June 7, 2012 CX-008630: Categorical Exclusion Determination Surface Water and Groundwater Sampling Pen Branch Floodplain near Chemicals

334

Categorical Exclusion Determinations: B1.3 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

July 16, 2012 July 16, 2012 CX-008505: Categorical Exclusion Determination Midwest Regional Carbon Sequestration Partnership - Phase Three CX(s) Applied: B3.1, B5.3, B1.3 Date: 07/16/2012 Location(s): Michigan Offices(s): National Energy Technology Laboratory July 11, 2012 CX-009079: Categorical Exclusion Determination Tie pH Adjustment System to 901-F Service Water System CX(s) Applied: B1.3 Date: 07/11/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office July 11, 2012 CX-009078: Categorical Exclusion Determination Dismantle and removal (D&R) of Domestic Water (DW) & Process Water (PWS) heater tanks CX(s) Applied: B1.3 Date: 07/11/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office July 10, 2012 CX-008523: Categorical Exclusion Determination

335

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

10, 2010 10, 2010 CX-004043: Categorical Exclusion Determination Pier 2 Project CX(s) Applied: B5.1 Date: 08/10/2010 Location(s): San Francisco, California Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory August 10, 2010 CX-003971: Categorical Exclusion Determination Bench Scale Process Development - In-Line Mixing Study CX(s) Applied: B3.6 Date: 08/10/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office August 10, 2010 CX-003632: Categorical Exclusion Determination Analysis of Evaporator Scale Sample CX(s) Applied: B3.6 Date: 08/10/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office August 10, 2010 CX-003631: Categorical Exclusion Determination Asbestos Removal in Spent Fuel Project (SFP) Facilities

336

Categorical Exclusion Determinations: Virginia | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

November 19, 2012 November 19, 2012 CX-009637: Categorical Exclusion Determination Removing Items or Materials Containing Polychlorinated Biphenyls CX(s) Applied: B1.17 Date: 11/19/2012 Location(s): Tennessee, California, California, Virginia Offices(s): Oak Ridge Office November 19, 2012 CX-009636: Categorical Exclusion Determination Ventilation Activities CX(s) Applied: B1.4, B1.16, B2.1, B2.3 Date: 11/19/2012 Location(s): Tennessee, California, California, Virginia Offices(s): Oak Ridge Office November 19, 2012 CX-009652: Categorical Exclusion Determination Closure Activities Under the Resource Conservation and Recovery ACT CX(s) Applied: B1.28 Date: 11/19/2012 Location(s): Tennessee, California, California, Virginia Offices(s): Oak Ridge Office November 19, 2012 CX-009651: Categorical Exclusion Determination

337

Categorical Exclusion Determinations: Fossil Energy | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

June 4, 2010 June 4, 2010 CX-002647: Categorical Exclusion Determination Development of Biochemical Techniques for the Extraction of Mercury from Waste Streams Containing Coal CX(s) Applied: B3.6 Date: 06/04/2010 Location(s): Morgantown, West Virginia Office(s): Fossil Energy, National Energy Technology Laboratory June 4, 2010 CX-002646: Categorical Exclusion Determination Polymer Nanocomposites for Carbon Dioxide Capture CX(s) Applied: B3.6 Date: 06/04/2010 Location(s): Morgantown, West Virginia Office(s): Fossil Energy, National Energy Technology Laboratory June 4, 2010 CX-002645: Categorical Exclusion Determination Fine Coal Flotation and Removal of Toxic Trace Elements CX(s) Applied: B3.6 Date: 06/04/2010 Location(s): Morgantown, West Virginia Office(s): Fossil Energy, National Energy Technology Laboratory

338

Page not found | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

11 - 22920 of 28,560 results. 11 - 22920 of 28,560 results. Download CX-007669: Categorical Exclusion Determination Vegetative Response to Metal Exposure in a Growing Media CX(s) Applied: B3.6 Date: 11/07/2011 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-007669-categorical-exclusion-determination Download CX-007671: Categorical Exclusion Determination Heat Exchanger Removal and Disposition CX(s) Applied: B6.1 Date: 11/07/2011 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-007671-categorical-exclusion-determination Download CX-007757: Categorical Exclusion Determination Multipurpose Target Chamber for High-Temperature Ion Irradation - University of Tennessee CX(s) Applied: B3.10

339

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

2, 2011 2, 2011 CX-005444: Categorical Exclusion Determination Energy Efficiency and Conservation Block Grant: Electric and Hybrid Vehicle Incremental Cost Recovery CX(s) Applied: B5.1 Date: 03/22/2011 Location(s): Fairfax County, Virginia Office(s): Energy Efficiency and Renewable Energy, Golden Field Office March 22, 2011 CX-005547: Categorical Exclusion Determination Specific Manufacturing Capability (SMC) Incinerator and Propane Tank System Removal CX(s) Applied: B1.23 Date: 03/22/2011 Location(s): Idaho Office(s): Nuclear Energy, Idaho Operations Office March 22, 2011 CX-005440: Categorical Exclusion Determination Rhode Island Non-utility Scale Renewable Energy Program CX(s) Applied: B5.1 Date: 03/22/2011 Location(s): North Kingstown, Rhode Island Office(s): Energy Efficiency and Renewable Energy, National Energy

340

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

October 4, 2012 October 4, 2012 CX-009220: Categorical Exclusion Determination CH2MHill Plateau Remediation Company - Siting, Construction, and Operation of Support Buildings and Support Structures CX(s) Applied: B1.15 Date: 10/04/2012 Location(s): Washington Offices(s): River Protection-Richland Operations Office October 4, 2012 CX-009170: Categorical Exclusion Determination Low Cost Arc-Fault Detection and Protection for Photovoltaic Systems-Tigo Energy, Inc. CX(s) Applied: B3.6 Date: CX: none Location(s): California Offices(s): Golden Field Office October 3, 2012 CX-009410: Categorical Exclusion Determination Granby (Farr) Pumping Plant Nest Removal Project CX(s) Applied: B1.3 Date: 10/03/2012 Location(s): Colorado Offices(s): Western Area Power Administration October 2, 2012 CX-009219: Categorical Exclusion Determination

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Page not found | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

41 - 10650 of 26,764 results. 41 - 10650 of 26,764 results. Download CX-003956: Categorical Exclusion Determination L Area Disassembly Basin Rack Removal / Installation Project CX(s) Applied: B1.3 Date: 09/15/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-003956-categorical-exclusion-determination Download CX-003957: Categorical Exclusion Determination Replacement of Air Compressors - Building 775-A CX(s) Applied: B1.3 Date: 09/15/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-003957-categorical-exclusion-determination Download CX-003958: Categorical Exclusion Determination Improving Technetium Retention in Secondary Waste CX(s) Applied: B3.6 Date: 09/15/2010

342

Categorical Exclusion Determinations: Colorado | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

May 18, 2012 May 18, 2012 CX-008766: Categorical Exclusion Determination Asphalt Repair and Concrete Work Activities at the Grand Junction, Colorado, Disposal Site CX(s) Applied: B1.3 Date: 05/18/2012 Location(s): Colorado Offices(s): Legacy Management May 15, 2012 CX-008238: Categorical Exclusion Determination Recovery Act: Colorado State Capitol Building Geothermal Program CX(s) Applied: A9, B2.1, B5.19 Date: 05/15/2012 Location(s): Colorado Offices(s): Golden Field Office May 9, 2012 CX-008401: Categorical Exclusion Determination Giant Track Communications Tower Removal CX(s) Applied: B1.19 Date: 05/09/2012 Location(s): Colorado Offices(s): Western Area Power Administration-Rocky Mountain Region May 9, 2012 CX-008381: Categorical Exclusion Determination Big Thompson to Flatiron 13.8 Kilovolt Transmission Line Structure

343

Categorical Exclusion Determinations: B1.23 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

May 17, 2011 May 17, 2011 CX-005976: Categorical Exclusion Determination Demolition of Trailers T116, T124, T134 CX(s) Applied: B1.23 Date: 05/17/2011 Location(s): Batavia, Illinois Office(s): Science, Fermi Site Office March 22, 2011 CX-005547: Categorical Exclusion Determination Specific Manufacturing Capability (SMC) Incinerator and Propane Tank System Removal CX(s) Applied: B1.23 Date: 03/22/2011 Location(s): Idaho Office(s): Nuclear Energy, Idaho Operations Office March 3, 2011 CX-007137: Categorical Exclusion Determination Davis Dam Lower 230-kilovolt Substation Service Building Demolition CX(s) Applied: B1.23 Date: 03/03/2011 Location(s): Mohave County, Arizona Office(s): Western Area Power Administration-Desert Southwest Region February 14, 2011 CX-005280: Categorical Exclusion Determination

344

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

0, 2010 0, 2010 CX-002372: Categorical Exclusion Determination Building 17 and 19 Utility Meter Install CX(s) Applied: B1.15, B2.2 Date: 05/10/2010 Location(s): Morgantown, West Virginia Office(s): National Energy Technology Laboratory May 10, 2010 CX-007160: Categorical Exclusion Determination Pinnacle Peak Substation Coupling Capacitor Voltage Transformer Installation CX(s) Applied: B4.6 Date: 05/10/2010 Location(s): Maricopa County, Arizona Office(s): Western Area Power Administration-Desert Southwest Region May 10, 2010 CX-007155: Categorical Exclusion Determination Mead-Perkins Avian Nest Removal & Access Road Maintenance CX(s) Applied: B1.3 Date: 05/10/2010 Location(s): Maricopa County, Arizona Office(s): Western Area Power Administration-Desert Southwest Region

345

Categorical Exclusion Determinations: Arizona | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

February 18, 2010 February 18, 2010 CX-007167: Categorical Exclusion Determination Rogers-Coolidge Danger Tree Removal CX(s) Applied: B1.3 Date: 02/18/2010 Location(s): Pinal County, Arizona Office(s): Western Area Power Administration-Desert Southwest Region February 10, 2010 CX-001053: Categorical Exclusion Determination State of Arizona American Recovery and Reinvestment Act - Energy Efficiency and Conservation Block Grant (T) CX(s) Applied: A9, A11, B5.1 Date: 02/10/2010 Location(s): Arizona, Arizona Office(s): Energy Efficiency and Renewable Energy, Golden Field Office February 10, 2010 CX-001972: Categorical Exclusion Determination 21st Century Energy Grant Program CX(s) Applied: B2.5, B5.1 Date: 02/10/2010 Location(s): Arizona Office(s): Energy Efficiency and Renewable Energy, Golden Field Office

346

Categorical Exclusion Determinations: Savannah River Operations Office |  

Broader source: Energy.gov (indexed) [DOE]

April 20, 2011 April 20, 2011 CX-005766: Categorical Exclusion Determination Filter Testing with Static Test Cell CX(s) Applied: B3.6 Date: 04/20/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office April 19, 2011 CX-005769: Categorical Exclusion Determination Dismantle and Removal (D&R) and Enhance Chemical Cleaning (ECC) on Waste Tank 8F (General) CX(s) Applied: B1.28 Date: 04/19/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office April 15, 2011 CX-005771: Categorical Exclusion Determination Install Alternate Diesel Generator and Tie-In Connection for HB-Line CX(s) Applied: B2.5 Date: 04/15/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office

347

Categorical Exclusion Determinations: South Carolina | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

October 25, 2012 October 25, 2012 CX-009625: Categorical Exclusion Determination Preparation and Temperature-Time Settling Treatment of Rheology Samples CX(s) Applied: B3.6 Date: 10/25/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office October 18, 2012 CX-009628: Categorical Exclusion Determination Bronze Preparation for Zinc Sequestration CX(s) Applied: B3.6 Date: 10/18/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office October 17, 2012 CX-009629: Categorical Exclusion Determination Removal of Out-of-Service Steam Line Segment; D-Area to Ameresco Biomass Cogeneration Facility CX(s) Applied: B1.23 Date: 10/17/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office September 7, 2012 CX-009178: Categorical Exclusion Determination

348

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

August 1, 2013 August 1, 2013 CX-010819: Categorical Exclusion Determination Technology Integration Program - Field Trial - Site Three CX(s) Applied: B3.1, B3.6 Date: 08/01/2013 Location(s): Texas Offices(s): National Energy Technology Laboratory August 1, 2013 CX-010835: Categorical Exclusion Determination Disconnect Equipment and Activate Gloveboxes From Lab 174, Gloveboxes 12 & 13 CX(s) Applied: B2.3 Date: 08/01/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office August 1, 2013 CX-010834: Categorical Exclusion Determination 704-L Machine Shop Equipment Removal CX(s) Applied: B1.24 Date: 08/01/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office August 1, 2013 CX-010818: Categorical Exclusion Determination Technology Integration Program - Field Trial - Site Three

349

Categorical Exclusion Determinations: Western Area Power  

Broader source: Energy.gov (indexed) [DOE]

March 11, 2010 March 11, 2010 CX-007156: Categorical Exclusion Determination New Waddell-Raceway-Westwing Structure Replacement CX(s) Applied: B4.6, B4.13 Date: 03/11/2010 Location(s): Maricopa County, Arizona Office(s): Western Area Power Administration-Desert Southwest Region February 18, 2010 CX-007167: Categorical Exclusion Determination Rogers-Coolidge Danger Tree Removal CX(s) Applied: B1.3 Date: 02/18/2010 Location(s): Pinal County, Arizona Office(s): Western Area Power Administration-Desert Southwest Region December 31, 2009 CX-001121: Categorical Exclusion Determination Transmission Line Structure Relocation of Existing Oracle-Tucson 115-kilovolt Transmission Line CX(s) Applied: B4.13 Date: 12/31/2009 Location(s): Pima County, Arizona Office(s): Western Area Power Administration-Desert Southwest Region

350

Categorical Exclusion Determinations: Arizona | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

February 7, 2011 February 7, 2011 CX-007151: Categorical Exclusion Determination Gila-Knob Structure, Access Road Maintenance & Vegetation Removal CX(s) Applied: B4.6 Date: 02/07/2011 Location(s): Yuma County, AZ; Imperial County, CA, Arizona, California Office(s): Western Area Power Administration-Desert Southwest Region January 25, 2011 CX-005545: Categorical Exclusion Determination Installation of Metering and Circuit Breaker at Powell 69-Kilovolt Substation CX(s) Applied: B4.11 Date: 01/25/2011 Location(s): Page, Arizona Office(s): Western Area Power Administration-Colorado River Storage Project Management Center January 7, 2011 CX-007164: Categorical Exclusion Determination Prescott-Pinnacle Peak & Pinnacle Peak-Rogers Aerial Marker Ball Addition CX(s) Applied: B1.9

351

Categorical Exclusion Determinations: B1.3 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

August 24, 2011 August 24, 2011 CX-006776: Categorical Exclusion Determination Hills Creek-Lookout Point #1 Wood Pole and Access Road Maintenance CX(s) Applied: B1.3 Date: 08/24/2011 Location(s): Lane County, Oregon Office(s): Bonneville Power Administration August 24, 2011 CX-006591: Categorical Exclusion Determination Invasive Species Removal and Reclamation in Gold Eagle Mining, Incorporated CX(s) Applied: B1.3, B1.20 Date: 08/24/2011 Location(s): San Miguel County, Colorado Office(s): Legacy Management August 23, 2011 CX-007072: Categorical Exclusion Determination Install and Operate Chromate Water (CRW) Deionizer CX(s) Applied: B1.3 Date: 08/23/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management August 22, 2011 CX-006583: Categorical Exclusion Determination

352

Categorical Exclusion Determinations: Savannah River Operations Office |  

Broader source: Energy.gov (indexed) [DOE]

October 3, 2011 October 3, 2011 CX-006944: Categorical Exclusion Determination Remove Insulation from High Point Flush Pump Drain Valve CX(s) Applied: B1.3 Date: 10/03/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, National Energy Technology Laboratory September 29, 2011 CX-006946: Categorical Exclusion Determination Operation of Accredited Industrial Hygiene (IH) Laboratory in Building 772-F, Revision 1 CX(s) Applied: B3.6 Date: 09/29/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, National Energy Technology Laboratory September 28, 2011 CX-006955: Categorical Exclusion Determination Repair Radiological Fixative Coatings in F Tank Farm CX(s) Applied: B1.3 Date: 09/28/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Sandia Site Office

353

Categorical Exclusion Determinations: Savannah River Operations Office |  

Broader source: Energy.gov (indexed) [DOE]

December 10, 2010 December 10, 2010 CX-004837: Categorical Exclusion Determination Measurement of Compressive Strength CX(s) Applied: B3.6 Date: 12/10/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office December 7, 2010 CX-004826: Categorical Exclusion Determination Piezometer Well Installation for 1,4-Dioxane Monitoring CX(s) Applied: B3.1 Date: 12/07/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office December 7, 2010 CX-004824: Categorical Exclusion Determination Dismantle and Remove Tank 6 Riser 7 for Waste Determination (WD) Sampling CX(s) Applied: B1.3 Date: 12/07/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office December 7, 2010 CX-004823: Categorical Exclusion Determination Consolidation of K- and L-Area Heavy Water in C-Area

354

Washington | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

20, 2011 20, 2011 CX-006817: Categorical Exclusion Determination McNary-Ross No. 1 Upgrade Project, Surface Impairment Removal CX(s) Applied: B1.3 Date: 09/20/2011 Location(s): Klickitat and Clark Counties, Washington Office(s): Bonneville Power Administration September 19, 2011 CX-006840: Categorical Exclusion Determination Security Barrier Relocation at the 618-11 Burial Grounds CX(s) Applied: B1.15 Date: 09/19/2011 Location(s): Richland, Washington Office(s): River Protection-Richland Operations Office, Golden Field Office September 19, 2011 CX-006839: Categorical Exclusion Determination Training Exercises and Simulations on the Hanford Site CX(s) Applied: B1.2 Date: 09/19/2011 Location(s): Richland, Washington Office(s): River Protection-Richland Operations Office September 16, 2011

355

Categorical Exclusion Determinations: South Carolina | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

February 7, 2012 February 7, 2012 CX-007968: Categorical Exclusion Determination Retention Basin Cover & Liner System Removal From Service CX(s) Applied: B1.28 Date: 02/07/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office February 7, 2012 CX-007967: Categorical Exclusion Determination Electrochemical Fluorination in Molten Fluoride Salts CX(s) Applied: B3.6 Date: 02/07/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office February 7, 2012 CX-007966: Categorical Exclusion Determination Sampling of Legacy Material for Material, Control & Accountability (MC&A) Verification CX(s) Applied: B3.6 Date: 02/07/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office February 7, 2012 CX-007965: Categorical Exclusion Determination

356

Categorical Exclusion Determinations: South Carolina | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

September 15, 2010 September 15, 2010 CX-003958: Categorical Exclusion Determination Improving Technetium Retention in Secondary Waste CX(s) Applied: B3.6 Date: 09/15/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office September 15, 2010 CX-003957: Categorical Exclusion Determination Replacement of Air Compressors - Building 775-A CX(s) Applied: B1.3 Date: 09/15/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office September 15, 2010 CX-003956: Categorical Exclusion Determination L Area Disassembly Basin Rack Removal / Installation Project CX(s) Applied: B1.3 Date: 09/15/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office September 15, 2010 CX-003955: Categorical Exclusion Determination Column Loading of Crystalline Silicotitanate

357

Categorical Exclusion Determinations: California | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

November 19, 2012 November 19, 2012 CX-010357: Categorical Exclusion Determination Replacement Removal and Closure of Underground Storage Tanks USTs CX(s) Applied: B2.5; B6.1 Date: 11/19/2012 Location(s): Tennessee, California, Virginia Offices(s): Berkeley Site Office November 19, 2012 CX-010356: Categorical Exclusion Determination Site Characterization Investigation and Environmental Monitoring Activities CX(s) Applied: B3.1 Date: 11/19/2012 Location(s): Tennessee, California, Virginia Offices(s): Berkeley Site Office November 19, 2012 CX-010355: Categorical Exclusion Determination Training Exercises and Simulation Projects CX(s) Applied: B1.2 Date: 11/19/2012 Location(s): Tennessee, California, Virginia Offices(s): Berkeley Site Office November 19, 2012 CX-010354: Categorical Exclusion Determination

358

Categorical Exclusion Determinations: South Carolina | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

23, 2012 23, 2012 CX-009114: Categorical Exclusion Determination Dismantle and Remove Area Radiation Monitors (General) CX(s) Applied: B3.1 Date: 08/23/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office August 23, 2012 CX-009113: Categorical Exclusion Determination Pull/Install New Fiber Optic Cables From 241-2H to 241-62F (General) CX(s) Applied: B1.7 Date: 08/23/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office August 23, 2012 CX-009112: Categorical Exclusion Determination Work Performed in the Glass Apparatus Lab CX(s) Applied: B3.6 Date: 08/23/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office August 22, 2012 CX-009017: Categorical Exclusion Determination Clemson University 15 Megawatt Hardware-In-the-Loop (HIL) Grid Simulator

359

Page not found | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

21 - 12730 of 26,764 results. 21 - 12730 of 26,764 results. Download CX-010432: Categorical Exclusion Determination De-energized Wood Pole Removal Project CX(s) Applied: B4.10 Date: 06/05/2013 Location(s): Oregon, Oregon Offices(s): Bonneville Power Administration http://energy.gov/nepa/downloads/cx-010432-categorical-exclusion-determination Download CX-010729: Categorical Exclusion Determination 2013 Chemawa District Wood Pole Replacement Projects CX(s) Applied: B1.3 Date: 08/12/2013 Location(s): Oregon, Oregon, Oregon Offices(s): Bonneville Power Administration http://energy.gov/nepa/downloads/cx-010729-categorical-exclusion-determination-0 Download CX-008250: Categorical Exclusion Determination Geotechnical Core Drilling for USGS 138 CX(s) Applied: B3.1 Date: 04/18/2012 Location(s): Idaho

360

Categorical Exclusion Determinations: Bonneville Power Administration |  

Broader source: Energy.gov (indexed) [DOE]

August 5, 2011 August 5, 2011 CX-006482: Categorical Exclusion Determination Swan Valley - Palisades Communication Upgrade CX(s) Applied: B1.7, B4.6 Date: 08/05/2011 Location(s): Idaho Office(s): Bonneville Power Administration August 5, 2011 CX-006481: Categorical Exclusion Determination Funding Removal of Underground Storage Tank at Nelson Springs CX(s) Applied: B6.1 Date: 08/05/2011 Location(s): Richland, Washington Office(s): Bonneville Power Administration August 3, 2011 CX-006483: Categorical Exclusion Determination Balancing Authority Area Service Agreement with Lane Electric Cooperative, Inc. CX(s) Applied: B4.1 Date: 08/03/2011 Location(s): Eugene, Oregon Office(s): Bonneville Power Administration July 26, 2011 CX-006293: Categorical Exclusion Determination Provision of Funds to the Confederated Salish and Kootenai Tribes for

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Categorical Exclusion Determinations: B1.16 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

June 20, 2011 June 20, 2011 CX-006087: Categorical Exclusion Determination Removal of Asbestos from Buildings CX(s) Applied: B1.16 Date: 06/20/2011 Location(s): Richland, Washington Office(s): Office of River Protection-Richland Office April 12, 2011 CX-005607: Categorical Exclusion Determination Building 7 Roof Replacement Project CX(s) Applied: B1.3, B1.16 Date: 04/12/2011 Location(s): Morgantown, West Virginia Office(s): Fossil Energy, National Energy Technology Laboratory April 12, 2011 CX-005703: Categorical Exclusion Determination Connecticut-City-Hamden, Town of CX(s) Applied: A1, A9, A11, B1.16, B1.32, B2.5, B5.1, B6.1 Date: 04/12/2011 Location(s): Hamden, Connecticut Office(s): Energy Efficiency and Renewable Energy April 8, 2011 CX-005551: Categorical Exclusion Determination

362

Categorical Exclusion Determinations: Savannah River Operations Office |  

Broader source: Energy.gov (indexed) [DOE]

August 30, 2012 August 30, 2012 CX-009100: Categorical Exclusion Determination Cooling Tower Water Sampling and Analysis for Legionella Pneumophila Density CX(s) Applied: B3.6 Date: 08/30/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office August 29, 2012 CX-009106: Categorical Exclusion Determination Dismantle/Remove Vacuum System and Related Equipment in 772-F CX(s) Applied: B1.3 Date: 08/29/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office August 29, 2012 CX-009105: Categorical Exclusion Determination 284-H Track Coal Hopper Pit Modifications CX(s) Applied: B1.28 Date: 08/29/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office August 29, 2012 CX-009104: Categorical Exclusion Determination Infrastructure Modification for the Mobile Plutonium Facility (MPF) at the

363

Page not found | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

81 - 30790 of 31,917 results. 81 - 30790 of 31,917 results. Download CX-010344: Categorical Exclusion Determination Alvey District Wood Poles CX(s) Applied: B1.3 Date: 05/09/2013 Location(s): Oregon, Oregon, Oregon Offices(s): Bonneville Power Administration http://energy.gov/nepa/downloads/cx-010344-categorical-exclusion-determination Download CX-010424: Categorical Exclusion Determination Grand Coulee District Wood Replacement CX(s) Applied: B1.3 Date: 06/07/2013 Location(s): Washington, Washington Offices(s): Bonneville Power Administration http://energy.gov/nepa/downloads/cx-010424-categorical-exclusion-determination Download CX-010432: Categorical Exclusion Determination De-energized Wood Pole Removal Project CX(s) Applied: B4.10 Date: 06/05/2013 Location(s): Oregon, Oregon Offices(s): Bonneville Power Administration

364

Categorical Exclusion Determinations: New Mexico | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

December 11, 2009 December 11, 2009 CX-000577: Categorical Exclusion Determination Remove Unneeded Test Structures at National Solar Thermal Test Facility CX(s) Applied: B1.23 Date: 12/11/2009 Location(s): Albuquerque, New Mexico Office(s): Sandia Site Office December 11, 2009 CX-000415: Categorical Exclusion Determination Characterization of Most Promising Carbon Capture and Sequestration Formations in the Central Rocky Mountain Region CX(s) Applied: A9, A11 Date: 12/11/2009 Location(s): Socorro, New Mexico Office(s): Fossil Energy, National Energy Technology Laboratory December 10, 2009 CX-000573: Categorical Exclusion Determination Intermediate Depth Penetration Testing Revised (Giant Reusable Air Blast Simulator (GRABS) Site) CX(s) Applied: B3.11 Date: 12/10/2009 Location(s): Albuquerque, New Mexico

365

Categorical Exclusion Determinations: B6.1 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

13, 2011 13, 2011 CX-006758: Categorical Exclusion Determination Versailles Borough Stray Gas Mitigation - Continuation CX(s) Applied: B2.3, B2.5, B6.1 Date: 09/13/2011 Location(s): Versailles, Pennsylvania Office(s): Fossil Energy, National Energy Technology Laboratory August 23, 2011 CX-006599: Categorical Exclusion Determination Environmental Restoration and Waste Management Activities, Fiscal Year 2012-2013 CX(s) Applied: B6.1, B6.2 Date: 08/23/2011 Location(s): Amarillo, Texas Office(s): NNSA-Headquarters, Pantex Site Office August 19, 2011 CX-007077: Categorical Exclusion Determination Remove Soil Vapor Extraction (SVE) Unit #2 Equipment from the 321-M Solvent Storage Tank Area (SSTA) Dynamic Underground Stripping (DUS) Location CX(s) Applied: B6.1 Date: 08/19/2011

366

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

7, 2012 7, 2012 CX-008982: Categorical Exclusion Determination "Sacrificial Protective Coating Materials Regenerated In-Situ to Enable High Performance Membranes CX(s) Applied: A9, B3.6 Date: 08/27/2012 Location(s): California Offices(s): Golden Field Office" August 25, 2012 CX-008918: Categorical Exclusion Determination Remove/Demolish T-20, T-14, T-15, T-29 CX(s) Applied: B1.23 Date: 08/25/2012 Location(s): West Virginia Offices(s): National Energy Technology Laboratory August 24, 2012 CX-009412: Categorical Exclusion Determination 2012 Access Road Maintenance Along the Path 500 Kilovolt Transmission Line CX(s) Applied: B1.3, B1.13 Date: 08/24/2012 Location(s): California, California Offices(s): Western Area Power Administration August 24, 2012 CX-008927: Categorical Exclusion Determination

367

Categorical Exclusion Determinations: Savannah River Operations Office |  

Broader source: Energy.gov (indexed) [DOE]

April 16, 2010 April 16, 2010 CX-002207: Categorical Exclusion Determination Thin Films for Whisker Growth CX(s) Applied: B3.6 Date: 04/16/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office April 16, 2010 CX-002206: Categorical Exclusion Determination Real-Waste Testing of Enhanced Chemical Cleaning for Sludge Heel Removal CX(s) Applied: B3.6 Date: 04/16/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office April 16, 2010 CX-002208: Categorical Exclusion Determination Monitor Instruments Mass Spectrometer at Aiken County Technology Laboratory CX(s) Applied: B3.6 Date: 04/16/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office

368

Categorical Exclusion Determinations: B1.3 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

December 29, 2009 December 29, 2009 CX-007835: Categorical Exclusion Determination Energy Efficiency Retrofits on Municipal Buildings: Lighting, Window Replacement, and Insulation CX(s) Applied: B1.3, B2.5, B5.1 Date: 12/29/2009 Location(s): Illinois Offices(s): Energy Efficiency and Renewable Energy December 23, 2009 CX-000110: Categorical Exclusion Determination Bell's Public Lighting Replacement Project CX(s) Applied: B1.3, B5.1 Date: 12/23/2009 Location(s): Bell, California Office(s): Energy Efficiency and Renewable Energy December 17, 2009 CX-000809: Categorical Exclusion Determination Cut, Remove and Replace Off-Gas Exhaust Fan #2 and #3 foundation and Replace Air Monitor Fan #1 and #2 CX(s) Applied: B1.3 Date: 12/17/2009 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office

369

Page not found | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

21 - 13030 of 29,416 results. 21 - 13030 of 29,416 results. Download CX-009049: Categorical Exclusion Determination Laydown Yard Expansion East of 706-1F CX(s) Applied: B1.15 Date: 08/08/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-009049-categorical-exclusion-determination Download CX-009056: Categorical Exclusion Determination Removal of Out-of-Service Railroad Segment CX(s) Applied: B1.23 Date: 07/26/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-009056-categorical-exclusion-determination Download CX-009511: Categorical Exclusion Determination Alternate Source of Firewater at Bryan Mound CX(s) Applied: B5.2 Date: 11/05/2012 Location(s): Texas Offices(s): Strategic Petroleum Reserve Field Office

370

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

5, 2012 5, 2012 CX-008918: Categorical Exclusion Determination Remove/Demolish T-20, T-14, T-15, T-29 CX(s) Applied: B1.23 Date: 08/25/2012 Location(s): West Virginia Offices(s): National Energy Technology Laboratory August 24, 2012 CX-009412: Categorical Exclusion Determination 2012 Access Road Maintenance Along the Path 500 Kilovolt Transmission Line CX(s) Applied: B1.3, B1.13 Date: 08/24/2012 Location(s): California, California Offices(s): Western Area Power Administration August 24, 2012 CX-008927: Categorical Exclusion Determination Advanced Low Energy Enzyme Catalyzed Solvent for Carbon Dioxide Capture CX(s) Applied: B3.6 Date: 08/24/2012 Location(s): Alabama Offices(s): National Energy Technology Laboratory August 24, 2012 CX-008926: Categorical Exclusion Determination

371

Categorical Exclusion Determinations: Fossil Energy | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

March 3, 2010 March 3, 2010 CX-001004: Categorical Exclusion Determination West Hackberry Site Security Detection Systems Upgrade (Install) CX(s) Applied: B2.2 Date: 03/03/2010 Location(s): West Hackberry, Louisiana Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office March 2, 2010 CX-001034: Categorical Exclusion Determination Recovery Act: Solar Reforming of Carbon Dioxide to Produce Diesel Fuel CX(s) Applied: B3.6 Date: 03/02/2010 Location(s): Sacramento, California Office(s): Fossil Energy, National Energy Technology Laboratory March 1, 2010 CX-001003: Categorical Exclusion Determination West Hackberry Tank (WHT)-1 and WHT-10 Liner Removal/Reline CX(s) Applied: B1.3 Date: 03/01/2010 Location(s): West Hackberry, Louisiana Office(s): Fossil Energy, Strategic Petroleum Reserve Field Office

372

Categorical Exclusion Determinations: B1.3 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

December 7, 2010 December 7, 2010 CX-004824: Categorical Exclusion Determination Dismantle and Remove Tank 6 Riser 7 for Waste Determination (WD) Sampling CX(s) Applied: B1.3 Date: 12/07/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office December 7, 2010 CX-004821: Categorical Exclusion Determination On-Dock Rail Straddle Portal Test Facility Roller Compacted Concrete Paving Plan CX(s) Applied: B1.3 Date: 12/07/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office December 7, 2010 CX-004817: Categorical Exclusion Determination Replace Air Handling Unit Heating, Ventilation, and Air Conditioning (HVAC)-AHU-20984 (HVAC-FAN-E21) with HVAC-AHU-E-1, Building 773-A, Section E Southeast Roof CX(s) Applied: B1.3 Date: 12/07/2010

373

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

8, 2010 8, 2010 CX-003681: Categorical Exclusion Determination Nanostructured Solar Cells CX(s) Applied: B3.6 Date: 09/08/2010 Location(s): Little Rock, Arkansas Office(s): Energy Efficiency and Renewable Energy, Golden Field Office September 8, 2010 CX-003782: Categorical Exclusion Determination Driscoll Substation Radio Tower and Antenna Installation CX(s) Applied: B1.19 Date: 09/08/2010 Location(s): Clatsop County, Oregon Office(s): Bonneville Power Administration September 8, 2010 CX-003780: Categorical Exclusion Determination Installation and Removal of Relays - Port Townsend Paper Company CX(s) Applied: B1.3 Date: 09/08/2010 Location(s): Port Townsend, Washington Office(s): Bonneville Power Administration September 7, 2010 CX-004098: Categorical Exclusion Determination

374

Categorical Exclusion Determinations: A11 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

December 20, 2011 December 20, 2011 CX-007404: Categorical Exclusion Determination National Offshore Wind Energy Resource and Design Data Campaign - Analysis and Collaboration CX(s) Applied: A9, A11 Date: 12/20/2011 Location(s): New York Offices(s): Golden Field Office December 20, 2011 CX-007399: Categorical Exclusion Determination Offshore Wind Removing Market Barriers CX(s) Applied: A9, A11 Date: 12/20/2011 Location(s): Massachusetts Offices(s): Golden Field Office December 20, 2011 CX-007392: Categorical Exclusion Determination Control System for Buoyancy Stabilized Offshore Wind Turbine CX(s) Applied: A9, A11 Date: 12/20/2011 Location(s): Delaware Offices(s): Golden Field Office December 20, 2011 CX-007386: Categorical Exclusion Determination Colorado University Cleantech New Venture Challenge

375

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

8, 2010 8, 2010 CX-007167: Categorical Exclusion Determination Rogers-Coolidge Danger Tree Removal CX(s) Applied: B1.3 Date: 02/18/2010 Location(s): Pinal County, Arizona Office(s): Western Area Power Administration-Desert Southwest Region February 18, 2010 CX-000867: Categorical Exclusion Determination Project 1615 - Building 16 Polychlorinated Biphenyl Decontamination CX(s) Applied: B1.17 Date: 02/18/2010 Location(s): Missouri Office(s): Kansas City Site Office, NNSA-Headquarters February 18, 2010 CX-000866: Categorical Exclusion Determination Project 1614 - Building 15 Polychlorinated Biphenyl Decontamination CX(s) Applied: B1.16, B1.17 Date: 02/18/2010 Location(s): Missouri Office(s): Kansas City Site Office, NNSA-Headquarters February 18, 2010 CX-001047: Categorical Exclusion Determination

376

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

4, 2012 4, 2012 CX-009062: Categorical Exclusion Determination Dismantle and Remove Low Level Waste Loading Station, Building 735-A CX(s) Applied: B1.23 Date: 07/24/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office July 24, 2012 CX-009061: Categorical Exclusion Determination Analytical Development Wet Chemistry Methods CX(s) Applied: B3.6 Date: 07/24/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office July 24, 2012 CX-008603: Categorical Exclusion Determination South Dakota Program year 2012 State Energy Plan CX(s) Applied: A9, A11 Date: 07/24/2012 Location(s): South Dakota Offices(s): Golden Field Office July 24, 2012 CX-008594: Categorical Exclusion Determination Idaho Program Year 2012 State Energy Program Formula Grants

377

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

11, 2012 11, 2012 CX-009078: Categorical Exclusion Determination Dismantle and removal (D&R) of Domestic Water (DW) & Process Water (PWS) heater tanks CX(s) Applied: B1.3 Date: 07/11/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office July 10, 2012 CX-008811: Categorical Exclusion Determination Utility Energy Service Contract Closed Loop Centrifugal Chiller at the Central Chilled Water Facility CX(s) Applied: B1.5, B2.1 Date: 07/10/2012 Location(s): New York Offices(s): Brookhaven Site Office July 10, 2012 CX-008523: Categorical Exclusion Determination Non-Hazardous Solid Waste Disposal Contract (Garbage Collection) CX(s) Applied: A1, A8, B1.3 Date: 07/10/2012 Location(s): Oregon Offices(s): National Energy Technology Laboratory July 10, 2012

378

Categorical Exclusion Determinations: South Carolina | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

February 2, 2010 February 2, 2010 CX-000894: Categorical Exclusion Determination Electrical Isolation and Pole Removal, 13.8 kilovolt Section in F-Area CX(s) Applied: B4.10 Date: 02/02/2010 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office January 28, 2010 CX-000714: Categorical Exclusion Determination Expansion of Direct Current (DC) Bus Capacitor Manufacturing Facility CX(s) Applied: B1.15, B1.24, B1.31, B5.1 Date: 01/28/2010 Location(s): Simpsonville, South Carolina Office(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory January 28, 2010 CX-002552: Categorical Exclusion Determination Defense Waste Processing Facility (DWPF) Operations: Upgrade Support Equipment for DWPF Melter Bubblers CX(s) Applied: B1.3

379

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

0, 2013 0, 2013 CX-010418: Categorical Exclusion Determination Eastern Colorado Field Office Com Buildings Removal CX(s) Applied: B1.22, B1.23, B1.24 Date: 05/20/2013 Location(s): Colorado, Wyoming, Wyoming Offices(s): Western Area Power Administration-Rocky Mountain Region May 20, 2013 CX-010523: Categorical Exclusion Determination Fracture Evolution Following Hydraulic Stimulations within EGS Reservoirs CX(s) Applied: A9, B3.1, B3.6 Date: 05/20/2013 Location(s): Utah Offices(s): Golden Field Office May 20, 2013 CX-010407: Categorical Exclusion Determination Electrical District 2 to Saguaro #2 115 Kilovolt Transmission Line Access Road Maintenance between Structure 26/8 and 26/9 CX(s) Applied: B1.3 Date: 05/20/2013 Location(s): Arizona Offices(s): Western Area Power Administration-Desert Southwest Region

380

Page not found | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

11 - 19220 of 26,764 results. 11 - 19220 of 26,764 results. Download CX-006719: Categorical Exclusion Determination Casing Drilling Test CX(s) Applied: B1.3, B3.7, B5.12 Date: 05/17/2011 Location(s): Casper, Wyoming Office(s): RMOTC http://energy.gov/nepa/downloads/cx-006719-categorical-exclusion-determination Download CX-006659: Categorical Exclusion Determination Repair Flowline 100 Feet North of 71-3-SX-3 CX(s) Applied: B5.2, B5.4 Date: 02/16/2010 Location(s): Casper, Wyoming Office(s): RMOTC http://energy.gov/nepa/downloads/cx-006659-categorical-exclusion-determination Download CX-000681: Categorical Exclusion Determination Materials and Fuels Complex-Experimental Breeder Reactor-II Sodium Removal/Resource Conservation and Recovery Act Closure Activities CX(s) Applied: B6.1 Date: 01/20/2009

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Categorical Exclusion Determinations: Savannah River Operations Office |  

Broader source: Energy.gov (indexed) [DOE]

May 16, 2011 May 16, 2011 CX-006405: Categorical Exclusion Determination 707-C Storm Drain Repairs CX(s) Applied: B1.3 Date: 05/16/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office May 13, 2011 CX-006406: Categorical Exclusion Determination Silver Chloride Injection at the F Area Hazardous Waste Management Facilities Barrier Wall CX(s) Applied: B6.9 Date: 05/13/2011 Location(s): Aiken, South Carolina Office(s): Environmental Management, Savannah River Operations Office May 12, 2011 CX-006407: Categorical Exclusion Determination Removal of Inactive Chromate Water Isolation Valves CRW-V-170 and CRW-V-175 and Installation of 3 Inch Blind Flanges for F-area New Hill CX(s) Applied: B1.3 Date: 05/12/2011 Location(s): Aiken, South Carolina

382

Page not found | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

61 - 11070 of 28,560 results. 61 - 11070 of 28,560 results. Download CX-007392: Categorical Exclusion Determination Control System for Buoyancy Stabilized Offshore Wind Turbine CX(s) Applied: A9, A11 Date: 12/20/2011 Location(s): Delaware Offices(s): Golden Field Office http://energy.gov/nepa/downloads/cx-007392-categorical-exclusion-determination Download CX-007399: Categorical Exclusion Determination Offshore Wind Removing Market Barriers CX(s) Applied: A9, A11 Date: 12/20/2011 Location(s): Massachusetts Offices(s): Golden Field Office http://energy.gov/nepa/downloads/cx-007399-categorical-exclusion-determination Download CX-007404: Categorical Exclusion Determination National Offshore Wind Energy Resource and Design Data Campaign - Analysis and Collaboration CX(s) Applied: A9, A11 Date: 12/20/2011

383

Categorical Exclusion Determinations: National Energy Technology Laboratory  

Broader source: Energy.gov (indexed) [DOE]

20, 2012 20, 2012 CX-008446: Categorical Exclusion Determination Solid Oxide Fuel Cells Operating on Alternative and Renewable Fuels CX(s) Applied: B3.6 Date: 06/20/2012 Location(s): Missouri Offices(s): National Energy Technology Laboratory June 20, 2012 CX-008445: Categorical Exclusion Determination Solid Oxide Fuel Cells Operating on Alternative and Renewable Fuels CX(s) Applied: B3.6 Date: 06/20/2012 Location(s): New York Offices(s): National Energy Technology Laboratory June 19, 2012 CX-008450: Categorical Exclusion Determination Building 93 Heat Exchanger Removal at National Energy Technology Laboratory Pittsburgh CX(s) Applied: B1.23, B1.31 Date: 06/19/2012 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory June 19, 2012 CX-008449: Categorical Exclusion Determination

384

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

19, 2013 19, 2013 CX-010614: Categorical Exclusion Determination Development of Criteria for Flashback Propensity in Jet Flames for High H2 Content and Natural Gas Fuels CX(s) Applied: A1, A9, B3.6 Date: 07/19/2013 Location(s): California Offices(s): National Energy Technology Laboratory July 18, 2013 CX-010854: Categorical Exclusion Determination 906-T Air Stripper Dismantle and Removal CX(s) Applied: B1.23 Date: 07/18/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office July 18, 2013 CX-010853: Categorical Exclusion Determination Analytical Methods for Radiochemical Measurements CX(s) Applied: B3.6 Date: 07/18/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office July 18, 2013 CX-010852: Categorical Exclusion Determination

385

Categorical Exclusion Determinations: National Energy Technology Laboratory  

Broader source: Energy.gov (indexed) [DOE]

April 27, 2012 April 27, 2012 CX-008292: Categorical Exclusion Determination Waste Heat Integration with Solvent Process for More Efficient Carbon Dioxide Removal from Coal-Fired Flue Gas CX(s) Applied: A11 Date: 04/27/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory April 25, 2012 CX-008309: Categorical Exclusion Determination Evaluation of Solid Sorbents as a Retrofit Technology for Carbon Dioxide Capture CX(s) Applied: B3.6 Date: 04/25/2012 Location(s): Colorado Offices(s): National Energy Technology Laboratory April 25, 2012 CX-008307: Categorical Exclusion Determination Deepwater Reverse-Circulation Primary Cementing CX(s) Applied: A9 Date: 04/25/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory April 25, 2012 CX-008306: Categorical Exclusion Determination

386

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

16, 2011 16, 2011 CX-006574: Categorical Exclusion Determination Purchase of the Diamond B Conservation Easement CX(s) Applied: B1.25 Date: 08/16/2011 Location(s): Flathead County, Montana Office(s): Bonneville Power Administration August 16, 2011 CX-006572: Categorical Exclusion Determination Energy Efficient Lighting for Traffic Signals, Building Lighting and Street Lighting CX(s) Applied: B2.5, B5.1 Date: 08/16/2011 Location(s): Aberdeen, South Dakota Office(s): Energy Efficiency and Renewable Energy August 16, 2011 CX-006540: Categorical Exclusion Determination Wells Fargo Property Structure Removal CX(s) Applied: B1.23 Date: 08/16/2011 Location(s): Golden, Colorado Office(s): Energy Efficiency and Renewable Energy, Golden Field Office August 16, 2011 CX-006538: Categorical Exclusion Determination

387

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

5, 2010 5, 2010 CX-003956: Categorical Exclusion Determination L Area Disassembly Basin Rack Removal / Installation Project CX(s) Applied: B1.3 Date: 09/15/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office September 15, 2010 CX-003955: Categorical Exclusion Determination Column Loading of Crystalline Silicotitanate CX(s) Applied: B3.6 Date: 09/15/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office September 15, 2010 CX-003954: Categorical Exclusion Determination Sample Analyses for Site Characterization Programs and Work for Others CX(s) Applied: B3.6 Date: 09/15/2010 Location(s): Aiken, South Carolina Office(s): Savannah River Operations Office September 15, 2010 CX-003953: Categorical Exclusion Determination

388

Categorical Exclusion (CX) Determinations By Date | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

7, 2011 7, 2011 CX-007401: Categorical Exclusion Determination Automatic AC Voltage Stabilization Using Photovoltaic (PV) Inverter Control to Mitigate the Variability of Real Power from PV Sources and Improve Existing Power Quality on the Distribution System CX(s) Applied: A9, B3.6 Date: 12/07/2011 Location(s): Massachusetts Offices(s): Golden Field Office December 7, 2011 CX-007400: Categorical Exclusion Determination Offshore Wind Removing Market Barriers CX(s) Applied: A9 Date: 12/07/2011 Location(s): Massachusetts Offices(s): Golden Field Office December 7, 2011 CX-007488: Categorical Exclusion Determination Appliance Rebates Market Title CX(s) Applied: A1, B5.1 Date: 12/07/2011 Location(s): Virginia Offices(s): National Energy Technology Laboratory December 7, 2011 CX-007434: Categorical Exclusion Determination

389

Page not found | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

21 - 14230 of 29,416 results. 21 - 14230 of 29,416 results. Download CX-010027: Categorical Exclusion Determination Removal of Glass Feed Prep System from 786-A (EDL) CX(s) Applied: B1.23 Date: 01/22/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-010027-categorical-exclusion-determination Download CX-010028: Categorical Exclusion Determination Flame Forming Proppants CX(s) Applied: B3.6 Date: 01/17/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office http://energy.gov/nepa/downloads/cx-010028-categorical-exclusion-determination Download CX-010030: Categorical Exclusion Determinationc Power to H-1Y Laydown Yard CX(s) Applied: B2.1 Date: 01/17/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office

390

Applied Math and Statistics: Applied Math Minor Curriculum Chart: 2013-2014  

E-Print Network [OSTI]

Applied Math and Statistics: Applied Math Minor Curriculum Chart: 2013-2014 http://matlab-training.soe.ucsc.edu/ PROBABILITY THEORY OR AMS 131 Introduction to Probability Theory CE 107 Mathematical Methods of Systems by the department. #12;Applied Math and Statistics: Applied Math Minor Curriculum Chart: 2013-2014 http

Stuart, Josh

391

Postdoctoral Position in Applied Mathematics Seminar for Applied Mathematics of ETH Zurich  

E-Print Network [OSTI]

Postdoctoral Position in Applied Mathematics Seminar for Applied Mathematics of ETH Z¨urich The Seminar for Applied Mathematics (SAM) of ETH Z¨urich offers a post- doctoral position in applied a competitive salary according to the standards of ETH Z¨urich as well as the opportunity to work

Feichtinger, Hans Georg

392

PhD Position in Applied Mathematics Seminar for Applied Mathematics of ETH Zurich  

E-Print Network [OSTI]

PhD Position in Applied Mathematics Seminar for Applied Mathematics of ETH Z¨urich The Seminar for Applied Mathematics (SAM) of ETH Z¨urich offers a PhD position in applied mathematics. The main research teaching load. The successful candidate will receive a competitive salary according to the standards of ETH

Feichtinger, Hans Georg

393

Removing Arsenic from Contaminated Drinking Water in Rural Bangladesh:  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Removing Arsenic from Contaminated Drinking Water in Rural Bangladesh: Removing Arsenic from Contaminated Drinking Water in Rural Bangladesh: Recent Fieldwork Results & Policy Implications Title Removing Arsenic from Contaminated Drinking Water in Rural Bangladesh: Recent Fieldwork Results & Policy Implications Publication Type Report Year of Publication 2009 Authors Mathieu, Johanna L., Ashok J. Gadgil, Kristin Kowolik, and Susan E. Addy Publisher Lawrence Berkeley National Laboratory City Berkeley Abstract of arsenic from drinking water in Bangladesh. During fieldwork in four sub-districts of the country, ARUBA reduced arsenic levels ranging from 200 to 900 ppb to below the Bangladesh standard of 50 ppb. The technology is cost-effective because the substrate-bottom ash from coal fired power plants-is a waste material readily available in South Asia. In comparison to similar technologies, ARUBA uses less media for arsenic removal due to its high surface area to volume ratio. Hence, less waste is produced. A number of experiments were conducted in Bangladesh to determine the effectiveness of various water treatment protocols. It was found that (1) ARUBA removes more thanhalf of the arsenic from water within five minutes of treatment, (2) ARUBA, that has settled at the bottom of a treatment vessel, continues to remove arsenic for 2-3 days, (3) ARUBA's arsenic removal efficiency can be improved through sequential partial dosing (adding a given amount of ARUBA in fractions versus all at once), and (4) allowing water to first stand for two to three days followed by treatment with ARUBA produced final arsenic levels ten times lower than treating water directly out of the well. Our findings imply a number of tradeoffs between ARUBA's effective arsenic removal capacity, treatment system costs, and waste output. These tradeoffs, some a function of arsenic-related policies in Bangladesh (e.g., waste disposal regulations), must be considered when designing anarsenic removal system. We propose that the most attractive option is to use ARUBA in communityscale water treatment centers, installed as public-private partnerships, in Bangladeshi villages

394

A method for removing arm backscatter from EPID images  

SciTech Connect (OSTI)

Purpose: To develop a method for removing the support arm backscatter from images acquired using current Varian electronic portal imaging devices (EPIDs).Methods: The effect of arm backscatter on EPID images was modeled using a kernel convolution method. The parameters of the model were optimized by comparing on-arm images to off-arm images. The model was used to develop a method to remove the effect of backscatter from measured EPID images. The performance of the backscatter removal method was tested by comparing backscatter corrected on-arm images to measured off-arm images for 17 rectangular fields of different sizes and locations on the imager. The method was also tested using on- and off-arm images from 42 intensity modulated radiotherapy (IMRT) fields.Results: Images generated by the backscatter removal method gave consistently better agreement with off-arm images than images without backscatter correction. For the 17 rectangular fields studied, the root mean square difference of in-plane profiles compared to off-arm profiles was reduced from 1.19% (standard deviation 0.59%) on average without backscatter removal to 0.38% (standard deviation 0.18%) when using the backscatter removal method. When comparing to the off-arm images from the 42 IMRT fields, the mean {gamma} and percentage of pixels with {gamma} < 1 were improved by the backscatter removal method in all but one of the images studied. The mean {gamma} value (1%, 1 mm) for the IMRT fields studied was reduced from 0.80 to 0.57 by using the backscatter removal method, while the mean {gamma} pass rate was increased from 72.2% to 84.6%.Conclusions: A backscatter removal method has been developed to estimate the image acquired by the EPID without any arm backscatter from an image acquired in the presence of arm backscatter. The method has been shown to produce consistently reliable results for a wide range of field sizes and jaw configurations.

King, Brian W. [School of Mathematical and Physics Sciences, University of Newcastle, Newcastle, New South Wales 2308 (Australia); Greer, Peter B. [Department of Radiation Oncology, Calvary Mater Newcastle Hospital, Newcastle, New South Wales 2310 (Australia); School of Mathematical and Physical Sciences, University of Newcastle, Newcastle, New South Wales 2308 (Australia)

2013-07-15T23:59:59.000Z

395

A struggle for Cherokee community : excavating identity in post-removal North Carolina.  

E-Print Network [OSTI]

??The Cherokee Removal of 1838 was intended to remove all members of the Cherokee Nation to west of the Mississippi River. However, a small number (more)

Greene, Lance.

2009-01-01T23:59:59.000Z

396

Removable pellicle for lithographic mask protection and handling  

DOE Patents [OSTI]

A removable pellicle for a lithographic mask that provides active and robust particle protection, and which utilizes a traditional pellicle and two deployments of thermophoretic protection to keep particles off the mask. The removable pellicle is removably attached via a retaining structure to the mask substrate by magnetic attraction with either contacting or non-contacting magnetic capture mechanisms. The pellicle retaining structural is composed of an anchor piece secured to the mask substrate and a frame member containing a pellicle. The anchor piece and the frame member are in removable contact or non-contact by the magnetic capture or latching mechanism. In one embodiment, the frame member is retained in a floating (non-contact) relation to the anchor piece by magnetic levitation. The frame member and the anchor piece are provided with thermophoretic fins which are interdigitated to prevent particles from reaching the patterned area of the mask. Also, the anchor piece and mask are maintained at a higher temperature than the frame member and pellicle which also prevents particles from reaching the patterned mask area by thermophoresis. The pellicle can be positioned over the mask to provide particle protection during mask handling, inspection, and pumpdown, but which can be removed manually or robotically for lithographic use of the mask.

Klebanoff, Leonard E. (Dublin, CA); Rader, Daniel J. (Albuquerque, NM); Hector, Scott D. (Oakland, CA); Nguyen, Khanh B. (Sunnyvale, CA); Stulen, Richard H. (Livermore, CA)

2002-01-01T23:59:59.000Z

397

Utilization of Partially Gasified Coal for Mercury Removal  

SciTech Connect (OSTI)

In this project, General Electric Energy and Environmental Research Corporation (EER) developed a novel mercury (Hg) control technology in which the sorbent for gas-phase Hg removal is produced from coal in a gasification process in-situ at a coal burning plant. The main objective of this project was to obtain technical information necessary for moving the technology from pilot-scale testing to a full-scale demonstration. A pilot-scale gasifier was used to generate sorbents from both bituminous and subbituminous coals. Once the conditions for optimizing sorbent surface area were identified, sorbents with the highest surface area were tested in a pilot-scale combustion tunnel for their effectiveness in removing Hg from coal-based flue gas. It was determined that the highest surface area sorbents generated from the gasifier process ({approx}600 m{sup 2}/g) had about 70%-85% of the reactivity of activated carbon at the same injection rate (lb/ACF), but were effective in removing 70% mercury at injection rates about 50% higher than that of commercially available activated carbon. In addition, mercury removal rates of up to 95% were demonstrated at higher sorbent injection rates. Overall, the results of the pilot-scale tests achieved the program goals, which were to achieve at least 70% Hg removal from baseline emissions levels at 25% or less of the cost of activated carbon injection.

Chris Samuelson; Peter Maly; David Moyeda

2008-09-09T23:59:59.000Z

398

Applied Intellectual Capital AIC | Open Energy Information  

Open Energy Info (EERE)

Zip: 94501-1010 Product: Applied Intellectual Capital (AIC) was founded in 1999 to fund technology development in clean energy, clean water and sustainable resources. References:...

399

Corrections APPLIED PHYSICAL SCIENCES, BIOPHYSICS AND  

E-Print Network [OSTI]

Corrections APPLIED PHYSICAL SCIENCES, BIOPHYSICS AND COMPUTATIONAL BIOLOGY Correction gene, MyHC-IIb, which is thought under most circumstances not to be expressed. The physiological

Spudich, James A.

400

Applied Films Corporation | Open Energy Information  

Open Energy Info (EERE)

Name: Applied Films Corporation Place: Longmont, Colorado Zip: 80504 Sector: Services, Solar Product: Provider of thin film deposition equipment and services, particularly to...

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Low energy N{sub 2} ion bombardment for removal of (HfO{sub 2}){sub x}(SiON){sub 1-x} in dilute HF  

SciTech Connect (OSTI)

The ion assisted wet removal of (HfO{sub 2}){sub x}(SiON){sub 1-x} high dielectric constant (k) materials and its effect on electrical properties were investigated. Crystallization temperature of (HfO{sub 2}){sub x}(SiON){sub 1-x} increased as the percentage of SiON increased. The crystallized (HfO{sub 2}){sub 0.6}(SiON){sub 0.4} was damaged and turned to an amorphous film via incorporation of N species into the film by N{sub 2} plasma treatment. In addition, the structure of (HfO{sub 2}){sub 0.6}(SiON){sub 0.4} was disintegrated into HfO{sub 2}, SiO(N), and ON after N{sub 2} plasma treatment. N{sub 2} plasmas using low bias power were applied for wet removal of high-k films and the mechanism of the ion assisted wet removal process was explored. When high bias power was applied, the surface of source and drain regions was nitrided via the reaction between N and Si substrates. Feasibility of the low bias power assisted wet removal process was demonstrated for short channel high-k metal oxide semiconductor device fabrication by the smaller shift of threshold voltage, compared to the high bias power assisted wet removal process as well as the wet-etching-only process.

Hwang, Wan Sik; Cho, Byung-Jin; Chan, Daniel S. H.; Yoo, Won Jong [Silicon Nano Device Laboratory, Department of Electrical and Computer Engineering, National University of Singapore, E4A 02-04, Engineering Drive 3, 117576 Singapore (Singapore); SKKU Advanced Institute of Nanotechnology (SAINT) and Department of Mechanical Engineering, Sungkyunkwan University 300 Cheoncheon-dong, Jangan-gu, Suwon, Gyeonggi-do 440-746 (Korea, Republic of)

2007-07-15T23:59:59.000Z

402

Lab sets new record for waste volume removed  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Lab Sets New Record for Waste Volume Removed Lab Sets New Record for Waste Volume Removed Community Connections: Our link to Northern New Mexico Communities Latest Issue:Dec. 2013 - Jan. 2014 All Issues » submit Lab sets new record for waste volume removed The Transuranic Waste Program has met its commitment to ship 800 cubic meters of TRU waste to the Waste Isolation Pilot Plant during fiscal year 2012. November 1, 2012 dummy image Read our archives Contacts Editor Linda Anderman Email Community Programs Office Kurt Steinhaus Email A lot of people worked together to make this happen, including our partners at the State of New Mexico and WIPP, as well as NNSA, the Los Alamos Site Office, and the Laboratory. The LANL Transuranic (TRU) Waste Program has met its commitment to ship 800 cubic meters of TRU waste to the Waste Isolation Pilot Plant (WIPP) during

403

Removing nuclear waste, one shipment at a time  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Stories » Stories » Removing nuclear waste, one shipment at a time Removing nuclear waste, one shipment at a time The Lab's 1,000th shipment of transuranic waste recently left Los Alamos, on its way to a permanent repository near Carlsbad, NM. June 26, 2012 Governor Martinez applauding the 1014th TRU waste shipment New Mexico Governor Susana Martinez and other dignitaries applaud as the 1,014th shipment of transuranic waste leaves Los Alamos National Laboratory. Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email "The milestone we're celebrating is one that has been a long-term environmental commitment." Removing nuclear waste, one shipment at a time Elected officials and other dignitaries recently gathered at Los Alamos

404

Moab Mill Tailings Removal Project Celebrates 5 Years of Success |  

Broader source: Energy.gov (indexed) [DOE]

Mill Tailings Removal Project Celebrates 5 Years of Success Mill Tailings Removal Project Celebrates 5 Years of Success Moab Mill Tailings Removal Project Celebrates 5 Years of Success October 3, 2012 - 12:00pm Addthis Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Moab Federal Project Director Donald Metzler stands on a final cover layer of the disposal cell. Several other layers are visible behind him. Moab Federal Project Director Donald Metzler stands on a final cover layer

405

Rocket Slated for Removal Following Inspections | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Rocket Slated for Removal Following Inspections Rocket Slated for Removal Following Inspections Rocket Slated for Removal Following Inspections April 29, 2013 - 12:00pm Addthis Though not linked to activities at Clean Slate III, the rocket is situated inside the historic testing location, identified for the plutonium dispersal test conducted under Operation Roller Coaster in June 1963. Though not linked to activities at Clean Slate III, the rocket is situated inside the historic testing location, identified for the plutonium dispersal test conducted under Operation Roller Coaster in June 1963. LAS VEGAS - Nevada Field Office and U.S. Air Force staff conducted inspections of a partially-buried rocket located at a historic testing location on the Tonopah Test Range (TTR) earlier this year. While the origin of the rocket and the time frame of its launch are

406

Energy Department Announces New Initiative to Remove Barriers for Industry  

Broader source: Energy.gov (indexed) [DOE]

Initiative to Remove Barriers for Initiative to Remove Barriers for Industry to Work with National Labs, Commercialize Technology Energy Department Announces New Initiative to Remove Barriers for Industry to Work with National Labs, Commercialize Technology December 8, 2011 - 12:30pm Addthis Washington, D.C. - As part of President Obama's commitment to helping U.S businesses create jobs and strengthen their competitiveness by speeding up the transfer of federal research and development from the laboratory to the marketplace, U.S. Deputy Secretary of Energy Daniel Poneman today announced a new pilot initiative to reduce some of the hurdles that prevent innovative companies from working with the Department of Energy's national laboratories. The new Agreements for Commercializing Technology

407

Mobile system for microwave removal of concrete surfaces  

DOE Patents [OSTI]

A method and apparatus for the microwave removal of contaminated concrete surfaces. The apparatus comprises a housing adapted to pass over a support surface. The housing includes a waveguide for directing microwave energy to the surface at an angle maximizing absorption of microwave energy by the surface. The apparatus is further provided with a source of microwave energy operably associated with the waveguide, wherein the microwave energy has a frequency of between about 10.6 GHz and about 24 GHz and acts to remove the uppermost layer from the surface. The apparatus further includes a debris containment assembly comprising a vacuum assembly operably associated with the housing. The vacuum assembly is adapted to remove debris from the area adjacent the surface.

White, Terry L. (Oak Ridge, TN); Bigelow, Timothy S. (Knoxville, TN); Schaich, Charles R. (Lenoir City, TN); Foster, Jr., Don (Knoxville, TN)

1997-01-01T23:59:59.000Z

408

Evaluation of Technologies to Remove Suspended Solids from Waste Water  

SciTech Connect (OSTI)

The Effluent Treatment Facility (ETF) at the Savannah River Site utilizes pH adjustment, submicron filtration, Hg removal resin, activated carbon, reverse osmosis, cationic exchange, and evaporation to remove contaminants from radioactive waste water. After startup, the ETF had difficulty achieving design capacity. The primary problem was fouling of the ceramic microfilters. Typical filter flow rates were only 20 percent of design capacity.A research program was conducted to identify and evaluate technologies for improving suspended solids removal from radioactive wastewater at the Savannah River Site. Technolgies investigated were a ceramic microfilter, a tubular polymeric ultrafilter, two porous metal filters, a polymeric centrifugal ultrafilter, a deep bed filter, a backwashable cartridge filter, a fabric filter, and a centriguge.

Poirier, M.R.

1999-03-15T23:59:59.000Z

409

Other States Nonhydrocarbon Gases Removed from Natural Gas (Million Cubic  

U.S. Energy Information Administration (EIA) Indexed Site

Nonhydrocarbon Gases Removed from Natural Gas (Million Cubic Feet) Nonhydrocarbon Gases Removed from Natural Gas (Million Cubic Feet) Other States Nonhydrocarbon Gases Removed from Natural Gas (Million Cubic Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1996 - - - - - - - - - - - - 1997 513 491 515 539 557 534 541 579 574 585 558 573 1998 578 536 591 581 517 456 486 486 471 477 457 468 1999 466 438 489 495 499 510 547 557 544 555 541 579 2000 587 539 605 587 615 570 653 629 591 627 609 611 2001 658 591 677 690 718 694 692 679 686 697 688 700 2002 639 591 587 621 622 605 654 639 649 650 623 638 2003 689 624 649 676 702 691 733 732 704 734 719 748 2004 741 697 727 692 692 688 718 729 706 723 711 718

410

Moab Mill Tailings Removal Project Celebrates 5 Years of Success |  

Broader source: Energy.gov (indexed) [DOE]

Moab Mill Tailings Removal Project Celebrates 5 Years of Success Moab Mill Tailings Removal Project Celebrates 5 Years of Success Moab Mill Tailings Removal Project Celebrates 5 Years of Success October 3, 2012 - 12:00pm Addthis Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Moab Federal Project Director Donald Metzler stands on a final cover layer of the disposal cell. Several other layers are visible behind him. Moab Federal Project Director Donald Metzler stands on a final cover layer

411

Freeze Concentration Applied to Hazardous Waste Management  

E-Print Network [OSTI]

steps to remove or destroy the hazardous components prior to discharge. Incineration is widely used to destroy a broad range of these hazardous components. Its disposal efficiency is often used when defining the Best Available Technology for EPA... standards. However, high water content streams are expensive to incinerate since the incinerator must be designed to handle the feed volume even though the water in the feed is in itself harmless. Some hazardous components require operating temperatures...

Ruemekorf, R.

412

Roadmap: Technical and Applied Studies Fraud Examination  

E-Print Network [OSTI]

Roadmap: Technical and Applied Studies ­ Fraud Examination ­ Bachelor of Technical and Applied of Fraud Examination 3 C COMT 36318 Survey of Information Security, Internet Fraud and Computer Forensics to Fraud Examination 3 C JUS 22100 Basic Interviewing 3 C Major Requirement 3 C See note 2 on page 2

Sheridan, Scott

413

GRANT APPLICATION I am applying for a  

E-Print Network [OSTI]

GRANT APPLICATION I am applying for a: Faculty Research Travel Grant ($2,000 Maximum) The funds University Guidelines. Partnership Grant ($2,000 Maximum) The funds must be applied to costs directly related to travel (airfare, accommodation, and meals). This grant is not intended for general costs

414

UNL Core for Applied Genomics and Ecology  

E-Print Network [OSTI]

UNL Core for Applied Genomics and Ecology Bioinformatics training Roche 454 GS-FLX Registration, Microbiomes, Variant Analysis, Whole Genomes, Transcriptomes Data Analysis and Statistics CAGE database and employer. University of Nebraska-Lincoln*Core for Applied Genomics and Ecology* 323 Filley Hall *Lincoln

Farritor, Shane

415

SEPARATION OF HEAVY METALS: REMOVAL FROM INDUSTRIAL WASTEWATERS  

Office of Scientific and Technical Information (OSTI)

SEPARATION SEPARATION OF HEAVY METALS: REMOVAL FROM INDUSTRIAL WASTEWATERS AND CONTAMINATED SOIL* Robert W. Peters + and Linda Shem Energy Systems Division Argonne National Laboratory 9700 South Cass Avenue Argonne, Illinois 60439 Abstract This paper reviews the applicable separation technologies relating to removal of heavy metals from solution and from soils in order to present the state-of-the-art in the field. Each technology is briefly described and typical operating conditions and technology performance are presented. Technologies described include chemical precipitation (including hydroxide, carbonate, or sulfide reagents), coagulation/flocculation, ion exchange, solvent extraction, extraction with chelating agents, complexation, electrochemical operation, cementation, membrane operations, evaporation, adsorption, solidification/stabilization, and

416

Neutron removal cross section as a measure of neutron skin  

Science Journals Connector (OSTI)

We study the relation between neutron removal cross section (?-N) and neutron skin thickness for finite neutron-rich nuclei using the statistical abrasion ablation model. Different sizes of neutron skin are obtained by adjusting the diffuseness parameter of neutrons in the Fermi distribution. It is demonstrated that there is a good linear correlation between ?-N and the neutron skin thickness for neutron-rich nuclei. Further analysis suggests that the relative increase of neutron removal cross section could be used as a quantitative measure for neutron skin thickness in neutron-rich nuclei.

D. Q. Fang (???); Y. G. Ma (???); X. Z. Cai (???); W. D. Tian (???); H. W. Wang (???)

2010-04-07T23:59:59.000Z

417

Sorbents for the oxidation and removal of mercury  

DOE Patents [OSTI]

A promoted activated carbon sorbent is described that is highly effective for the removal of mercury from flue gas streams. The sorbent comprises a new modified carbon form containing reactive forms of halogen and halides. Optional components may be added to increase reactivity and mercury capacity. These may be added directly with the sorbent, or to the flue gas to enhance sorbent performance and/or mercury capture. Mercury removal efficiencies obtained exceed conventional methods. The sorbent can be regenerated and reused. Sorbent treatment and preparation methods are also described. New methods for in-flight preparation, introduction, and control of the active sorbent into the mercury contaminated gas stream are described.

Olson, Edwin S. (Grand Forks, ND); Holmes, Michael J. (Thompson, ND); Pavlish, John H. (East Grand Forks, MN)

2008-10-14T23:59:59.000Z

418

Method for removal of beryllium contamination from an article  

DOE Patents [OSTI]

A method of removal of beryllium contamination from an article is disclosed. The method typically involves dissolving polyisobutylene in a solvent such as hexane to form a tackifier solution, soaking the substrate in the tackifier to produce a preform, and then drying the preform to produce the cleaning medium. The cleaning media are typically used dry, without any liquid cleaning agent to rub the surface of the article and remove the beryllium contamination below a non-detect level. In some embodiments no detectible residue is transferred from the cleaning wipe to the article as a result of the cleaning process.

Simandl, Ronald F.; Hollenbeck, Scott M.

2012-12-25T23:59:59.000Z

419

Water Recycling removal using temperature-sensitive hydronen  

SciTech Connect (OSTI)

The overall objective of this project was to study the proposed Water Recycling/Removal Using Temperature-Sensitive Hydrogels. The main element of this technology is the design of a suitable hydrogel that can perform needed water separation for pulp and paper industry. The specific topics studied are to answer following questions: (a) Can water be removed using hydrogel from large molecules such as lignin? (b) Can the rate of separation be made faster? (c) What are the molecular interactions with hydrogel surface? (d) Can a hydrogel be designed for a high ionic strength and high temperature? Summary of the specific results are given.

Rana B. Gupta

2002-10-30T23:59:59.000Z

420

Investigating the Use of Biosorbents to Remove Arsenic from Water  

E-Print Network [OSTI]

,2,3 ?...........................................................................?36? Table?9?Arsenic?removal?and?its?adsorption?capacity?for?various?adsorbents?.....?37? ? ? ? ? 1? ? ? ? 1. INTRODUCTION 1 ? Arsenic?is?a?colorless?and?odorless?Group?V?element?discovered?in?1250?AD.? Arsenic?has?an?atomic?number?of?33?and?is?the?20...?present?an?oxidant?must?be?added?to?oxidize?As(III)? to?As(V)?and?form?anions?in?solutions?[27].? 1.5.5.?Adsorption?? Arsenic?removal?is?also?achieved?through?adsorption?on?commercial? adsorbents...

Erapalli, Shreyas

2011-02-22T23:59:59.000Z

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Sorbents for the oxidation and removal of mercury  

DOE Patents [OSTI]

A promoted activated carbon sorbent is described that is highly effective for the removal of mercury from flue gas streams. The sorbent comprises a new modified carbon form containing reactive forms of halogen and halides. Optional components may be added to increase reactivity and mercury capacity. These may be added directly with the sorbent, or to the flue gas to enhance sorbent performance and/or mercury capture. Mercury removal efficiencies obtained exceed conventional methods. The sorbent can be regenerated and reused. Sorbent treatment and preparation methods are also described. New methods for in-flight preparation, introduction, and control of the active sorbent into the mercury contaminated gas stream are described.

Olson, Edwin S.; Holmes, Michael J.; Pavlish, John Henry

2014-09-02T23:59:59.000Z

422

Methods of hydrotreating a liquid stream to remove clogging compounds  

DOE Patents [OSTI]

A method includes producing formation fluid from a subsurface in situ heat treatment process. The formation fluid is separated to produce a liquid stream and a gas stream. At least a portion of the liquid stream is provided to a hydrotreating unit. At least a portion of selected in situ heat treatment clogging compositions in the liquid stream are removed to produce a hydrotreated liquid stream by hydrotreating at least a portion of the liquid stream at conditions sufficient to remove the selected in situ heat treatment clogging compositions.

Minderhoud, Johannes Kornelis [Amsterdam, NL; Nelson, Richard Gene [Katy, TX; Roes, Augustinus Wilhelmus Maria [Houston, TX; Ryan, Robert Charles [Houston, TX; Nair, Vijay [Katy, TX

2009-09-22T23:59:59.000Z

423

Applied Materials Inc AMAT | Open Energy Information  

Open Energy Info (EERE)

Inc AMAT Inc AMAT Jump to: navigation, search Name Applied Materials Inc (AMAT) Place Santa Clara, California Zip 95052-8039 Sector Solar Product US-based manufacturer of equipment used in solar (silicon, thin-film, BIPV), semiconductor, and LCD markets. References Applied Materials Inc (AMAT)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Applied Materials Inc (AMAT) is a company located in Santa Clara, California . References ↑ "Applied Materials Inc (AMAT)" Retrieved from "http://en.openei.org/w/index.php?title=Applied_Materials_Inc_AMAT&oldid=342244" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes

424

Applied Materials Wind Turbine | Open Energy Information  

Open Energy Info (EERE)

Wind Turbine Wind Turbine Jump to: navigation, search Name Applied Materials Wind Turbine Facility Applied Materials Sector Wind energy Facility Type Community Wind Facility Status In Service Owner Applied Materials Developer Applied Materials Energy Purchaser Applied Materials Location Gloucester MA Coordinates 42.62895426°, -70.65153122° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.62895426,"lon":-70.65153122,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

425

Removal of mercury from solids using the potassium iodide/iodine leaching process  

SciTech Connect (OSTI)

Potassium iodide (KI) and iodine (I{sub 2}) leaching solutions have been evaluated for use in a process for removing mercury from contaminated mixed waste solids. Most of the experimental work was completed using surrogate waste. During the last quarter of fiscal year 1995, this process was evaluated using an actual mixed waste (storm sewer sediment from the Oak Ridge Y-12 Site). The mercury content of the storm sewer sediment was measured and determined to be approximately 35,000 mg/kg. A solution consisting of 0.2 M I{sub 2} and 0.4 M KI proved to be the most effective leachant used in the experiments when applied for 2 to 4 h at ambient temperature. Over 98% of the mercury was removed from the storm sewer sediment using this solution. Iodine recovery and recycle of the leaching agent were also accomplished successfully. Mathematical model was used to predict the amount of secondary waste in the process. Both surrogate waste and actual waste were used to study the fate of radionuclides (uranium) in the leaching process.

Klasson, K.T.; Koran, L.J. Jr.; Gates, D.D.; Cameron, P.A.

1997-12-01T23:59:59.000Z

426

Implementation of robust image artifact removal in SWarp through clipped mean stacking  

E-Print Network [OSTI]

We implement an algorithm for detecting and removing artifacts from astronomical images by means of outlier rejection during stacking. Our method is capable of addressing both small, highly significant artifacts such as cosmic rays and, by applying a filtering technique to generate single frame masks, larger area but lower surface brightness features such as secondary (ghost) images of bright stars. In contrast to the common method of building a median stack, the clipped or outlier-filtered mean stacked point-spread function (PSF) is a linear combination of the single frame PSFs as long as the latter are moderately homogeneous, a property of great importance for weak lensing shape measurement or model fitting photometry. In addition, it has superior noise properties, allowing a significant reduction in exposure time compared to median stacking. We make publicly available a modified version of SWarp that implements clipped mean stacking and software to generate single frame masks from the list of outlier pixel...

Gruen, D; Bernstein, G M

2014-01-01T23:59:59.000Z

427

Developments in integrated pollutant removal for low-emission oxy-fuel combustion  

SciTech Connect (OSTI)

A complete coal combustion and flue gas treatment scheme was designed, constructed, and operated at bench scale as a product of cooperative research between US DOEs Albany Research Center (ARC) and Jupiter Oxygen Corporation. The combustion gas generated using this oxy-fuel coal combustion process was effectively captured using an integrated pollutant removal (IPR) process. Supporting laboratory-scale research focuses on elements of IPR such as extraction of particulates, SO2, and mercury, and on the character of the liquid and vapor phase compositions for the CO2 - N2 - O2 mixture at the temperature and pressure conditions found at the end of the process. Future pilot-scale work will be necessary to generate economic and engineering data that will apply to full-scale oxy-fuel/IPR systems.

Gerdemann, Stephen J.; Summers, Cathy A.; Oryshchyn, Danylo B.; Patrick, Brian (Jupiter Oxygen Corp.); Ochs, Thomas L.

2005-09-01T23:59:59.000Z

428

Adsorptive removal of thiophene and benzothiophene over zeolites from Mae Moh coal fly ash  

Science Journals Connector (OSTI)

Zeolites have been hydrothermally synthesized using Thai coal fly ash from Mae Moh Power Plant as silica and alumina sources. The synthesis conditions, i.e., SiO2/Al2O3 ratio, amount of water, amount of base, and aging temperature, were varied to prepare different topologies of zeolitic products. The zeolites attained were sodalite (SOD), gismondine (GIS), and cancrinite (CAN). The zeolites have been applied to adsorption of thiophene and benzothiophene in n-hexane solution. It was found that GIS with higher specific surface area and average pore volume had superior performance to other synthesized materials. Adsorption capacity of our developed zeolites was compared to those of commercial zeolites, i.e. NaY, HUSY, beta, and ZSM-5 obtained via the conventional synthesis methods. The results suggested a potential of zeolites derived from Mae Moh coal fly ash for removal of refractory sulfur compounds, such as benzothiophene.

Chawalit Ngamcharussrivichai; Chatchawan Chatratananon; Sakdinun Nuntang; Pattarapan Prasassarakich

2008-01-01T23:59:59.000Z

429

Notice of Asbestos-Containing Material (ACM) Removal Request for Correction of Online ACM Inventory  

E-Print Network [OSTI]

(s) for Removal: Materials Removed (attach additional pages as necessary): Room Number Description, size, colorNotice of Asbestos-Containing Material (ACM) Removal and Request for Correction of Online ACM Inventory This form is to be completed for all asbestos abatement/removal work at the University of Maryland

Rubloff, Gary W.

430

Process for removing polymer-forming impurities from naphtha fraction  

DOE Patents [OSTI]

Polymer precursor materials are vaporized without polymerization or are removed from a raw naphtha fraction by passing the raw naphtha to a vaporization zone and vaporizing the naphtha in the presence of a wash oil while stripping with hot hydrogen to prevent polymer deposits in the equipment. 2 figs.

Kowalczyk, D.C.; Bricklemyer, B.A.; Svoboda, J.J.

1983-12-27T23:59:59.000Z

431

Mercury removal in utility wet scrubber using a chelating agent  

DOE Patents [OSTI]

A method for capturing and reducing the mercury content of an industrial flue gas such as that produced in the combustion of a fossil fuel or solid waste adds a chelating agent, such as ethylenediaminetetraacetic acid (EDTA) or other similar compounds like HEDTA, DTPA and/or NTA, to the flue gas being scrubbed in a wet scrubber used in the industrial process. The chelating agent prevents the reduction of oxidized mercury to elemental mercury, thereby increasing the mercury removal efficiency of the wet scrubber. Exemplary tests on inlet and outlet mercury concentration in an industrial flue gas were performed without and with EDTA addition. Without EDTA, mercury removal totaled 42%. With EDTA, mercury removal increased to 71%. The invention may be readily adapted to known wet scrubber systems and it specifically provides for the removal of unwanted mercury both by supplying S.sup.2- ions to convert Hg.sup.2+ ions into mercuric sulfide (HgS) and by supplying a chelating agent to sequester other ions, including but not limited to Fe.sup.2+ ions, which could otherwise induce the unwanted reduction of Hg.sup.2+ to the form, Hg.sup.0.

Amrhein, Gerald T. (Louisville, OH)

2001-01-01T23:59:59.000Z

432

Method for removing particulate matter from a gas stream  

DOE Patents [OSTI]

Particulate matter is removed from a stream of pressurized gas by directing the stream of gas upwardly through a bed of porous material, the porous bed being held in an open ended container and at least partially submerged in liquid. The passage of the gas through the porous bed sets up a circulation in the liquid which cleans the particulate matter from the bed.

Postma, Arlin K. (Benton City, WA)

1984-01-01T23:59:59.000Z

433

Laboratory simulation of salt dissolution during waste removal  

SciTech Connect (OSTI)

Laboratory experiments were performed to support the field demonstration of improved techniques for salt dissolution in waste tanks at the Savannah River Site. The tests were designed to investigate three density driven techniques for salt dissolution: (1) Drain-Add-Sit-Remove, (2) Modified Density Gradient, and (3) Continuous Salt Mining. Salt dissolution was observed to be a very rapid process as salt solutions with densities between 1.38-1.4 were frequently removed. Slower addition and removal rates and locating the outlet line at deeper levels below the top of the saltcake provided the best contact between the dissolution water and the saltcake. It was observed that dissolution with 1 M sodium hydroxide solution resulted in salt solutions that were within the current inhibitor requirements for the prevention of stress corrosion cracking. This result was independent of the density driven technique. However, if inhibited water (0.01 M sodium hydroxide and 0.011 M sodium nitrite) was utilized, the salt solutions were frequently outside the inhibitor requirements. Corrosion testing at conditions similar to the environments expected during waste removal was recommended.

Wiersma, B.J.; Parish, W.R.

1997-01-01T23:59:59.000Z

434

Apparatuses and methods for removal of ink buildup  

DOE Patents [OSTI]

A substrate patterning method including the steps of spraying ink on a surface of a substrate, the spraying of the ink resulting in an overspray of excess ink past an edge of the substrate; changing a temperature of the excess ink to cause a change in a viscosity of the excess ink; and removing the excess ink having the changed viscosity.

Cudzinovic, Michael; Pass, Thomas; Rogers, Rob; Sun, Ray-Hon; Sun, Sheng; Wahlstrom, Ben; Fuhrman, Dennis Jason; Altendorf, Kyle David

2013-03-12T23:59:59.000Z

435

Columbia River Channel Improvement Project Rock Removal Blasting: Monitoring Plan  

SciTech Connect (OSTI)

This document provides a monitoring plan to evaluate take as outlined in the National Marine Fisheries Service 2002 Biological Opinion for underwater blasting to remove rock from the navigation channel for the Columbia River Channel Improvement Project. The plan was prepared by the Pacific Northwest National Laboratory (PNNL) for the U.S. Army Corps of Engineers (USACE), Portland District.

Carlson, Thomas J.; Johnson, Gary E.

2010-01-29T23:59:59.000Z

436

Removal of Waterborne Particles by Electrofiltration: Pilot-Scale Testing  

E-Print Network [OSTI]

researchers conducted bench-scale experiments to verify the effectiveness of electrofiltration, few studies plant. Presedimentation basin water was used as the influent with a turbidity ranging from 12 to 37 NTU to be more effective for removal of smaller particles (

Li, Ying

437

Particulate contamination removal from wafers using plasmas and mechanical agitation  

DOE Patents [OSTI]

Particulate contamination removal from wafers is disclosed using plasmas and mechanical agitation. The present invention includes the use of plasmas with mechanical agitation for removing particulate matter from the surface of a wafer. The apparatus hereof comprises a mechanical activator, at least one conducting contact pin for transferring the vibration from the activator to the wafer, clamp fingers that maintain the wafer`s position, and means for generating a plasma in the vicinity of the surface of the wafer, all parts of the cleaning apparatus except the mechanical activator and part of the contact pin being contained inside the processing chamber. By exposing a wafer to a plasma and providing motion thereto in a direction perpendicular to its surface, the bonding between the particulate matter and the surface may be overcome. Once free of the wafer surface, the particulates become charged by electrons from the plasma and are drawn into the plasma by attractive forces which keep them from redepositing. The introduction of a flowing gas through the plasma sweeps the particulates away from the wafer and out of the plasma. The entire surface is cleaned during one cleaning step. The use of an rf plasma to accomplish the particulate removal was found to remove more than 90% of the particulates. 4 figs.

Selwyn, G.S.

1998-12-15T23:59:59.000Z

438

Particulate contamination removal from wafers using plasmas and mechanical agitation  

DOE Patents [OSTI]

Particulate contamination removal from wafers using plasmas and mechanical agitation. The present invention includes the use of plasmas with mechanical agitation for removing particulate matter from the surface of a wafer. The apparatus hereof comprises a mechanical activator, at least one conducting contact pin for transferring the vibration from the activator to the wafer, clamp fingers that maintain the wafer's position, and means for generating a plasma in the vicinity of the surface of the wafer, all parts of the cleaning apparatus except the mechanical activator and part of the contact pin being contained inside the processing chamber. By exposing a wafer to a plasma and providing motion thereto in a direction perpendicular to its surface, the bonding between the particulate matter and the surface may be overcome. Once free of the wafer surface, the particulates become charged by electrons from the plasma and are drawn into the plasma by attractive forces which keep them from redepositing. The introduction of a flowing gas through the plasma sweeps the particulates away from the wafer and out of the plasma. The entire surface is cleaned during one cleaning step. The use of an rf plasma to accomplish the particulate removal was found to remove more than 90% of the particulates.

Selwyn, Gary S. (Los Alamos, NM)

1998-01-01T23:59:59.000Z

439

Copper Removal from A-01 Outfall by Ion Exchange  

SciTech Connect (OSTI)

Chelex100, a commercially available ion exchange resin, has been identified in this study as having a significant affinity for copper and zinc in the A-01 outfall water. Removal of copper and zinc from A-01 outfall water will ensure that the outfall meets the state of South Carolina's limit on these heavy metals.

Oji, L.N.

1999-02-17T23:59:59.000Z

440

Thief process for the removal of mercury from flue gas  

DOE Patents [OSTI]

A system and method for removing mercury from the flue gas of a coal-fired power plant is described. Mercury removal is by adsorption onto a thermally activated sorbent produced in-situ at the power plant. To obtain the thermally activated sorbent, a lance (thief) is inserted into a location within the combustion zone of the combustion chamber and extracts a mixture of semi-combusted coal and gas. The semi-combusted coal has adsorptive properties suitable for the removal of elemental and oxidized mercury. The mixture of semi-combusted coal and gas is separated into a stream of gas and semi-combusted coal that has been converted to a stream of thermally activated sorbent. The separated stream of gas is recycled to the combustion chamber. The thermally activated sorbent is injected into the duct work of the power plant at a location downstream from the exit port of the combustion chamber. Mercury within the flue gas contacts and adsorbs onto the thermally activated sorbent. The sorbent-mercury combination is removed from the plant by a particulate collection system.

Pennline, Henry W. (Bethel Park, PA); Granite, Evan J. (Wexford, PA); Freeman, Mark C. (South Park Township, PA); Hargis, Richard A. (Canonsburg, PA); O'Dowd, William J. (Charleroi, PA)

2003-02-18T23:59:59.000Z

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Removal of Heavy Metals from Industrial Effluent Using Bacteria  

E-Print Network [OSTI]

Industrial development results in the generation of industrial effluents, and if untreated results in water, sediment and soil pollution. (Fakayode and Onianwa, 2002 ? Fakayode, 2005). Industrial wastes and emission contain toxic and hazardous substances, most of which are detrimental to human health (Jimena et al.,2008 ? Ogunfowokan et al.,2005 ? Rajaram et al.,2008). The key pollutants include heavy metals, chemical wastes and oil spills etc. Heavy metal resistant bacteria have significant role in bioremediation of heavy metals in wastewater. The objective of this work is to study the role of bacteria in removing the heavy metals present in the industrial effluent.Five effluent samples out of nine were selected for this study due to high content of heavy metals. The heavy metals Hg and Cu were removed by Bacillus sp. The average Hg reduction was 45 % and Cu reduction was recorded as 62%. The heavy metals Cd, As and Co were removed by Pseudomonas sp. The average Cd reduction was 56%, average As reduction was 34 % and average Co reduction was recorded as 53%. The heavy metals Cd and Cu were removed by Staphylococcus sp. The average Cd reduction was 44 % and average Cu reduction was recorded as 34 %.

Manisha N; Dinesh Sharma; Arun Kumar

442

Pentek metal coating removal system: Baseline report; Greenbook (chapter)  

SciTech Connect (OSTI)

The Pentek coating removal technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The Pentek coating removal system consisted of the ROTO-PEEN Scaler, CORNER-CUTTER{reg_sign}, and VAC-PAC{reg_sign}. They are designed to remove coatings from steel, concrete, brick, and wood. The Scaler uses 3M Roto Peen tungsten carbide cutters while the CORNER-CUTTER{reg_sign} uses solid needles for descaling activities. These hand tools are used with the VAC-PAC{reg_sign} vacuum system to capture dust and debris as removal of the coating takes place. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. Dust exposure minimal, but noise exposure was significant. Further testing for each exposure is recommended because of the environment where the testing demonstration took place. It is feasible that the dust and noise levels will be higher in an enclosed operating environment of different construction. In addition, other areas of concern found were arm-hand vibration, whole-body, ergonomics, heat stress, tripping hazards, electrical hazards, machine guarding, and lockout/tagout.

NONE

1997-07-31T23:59:59.000Z

443

Justification to remove 333 Building fire suppression system  

SciTech Connect (OSTI)

Justification to remove the 333 Building fire suppression system is provided. The Maximum Possible Fire Loss (MPFL) is provided (approximately $800K), potential radiological and toxicological impacts from a postulated fire are discussed, Life Safety Code issues are addressed, and coordination with the Hanford Fire Department is assured.

Benecke, M.W.

1995-12-04T23:59:59.000Z

444

Detection and removal of molten salts from molten aluminum alloys  

SciTech Connect (OSTI)

Molten salts are one source of inclusions and defects in aluminum ingots and cast shapes. A selective adsorption media was used to remove these inclusions and a device for detection of molten salts was tested. This set of experiments is described and the results are presented and analyzed.

K. Butcher; D. Smith; C. L. Lin; L. Aubrey

1999-08-02T23:59:59.000Z

445

Removal of Natural Steroid Hormones from Wastewater Using  

E-Print Network [OSTI]

Removal of Natural Steroid Hormones from Wastewater Using Membrane Contactor Processes J O S H U water resources and increased interest in wastewater reclamation for potable reuse. This interest has in the study of wastewater reuse in advanced life support systems (e.g., space missions) because

446

An Adaptive Kalman Filter for Removing Baseline Wandering in ECG  

E-Print Network [OSTI]

An Adaptive Kalman Filter for Removing Baseline Wandering in ECG Signals MA Mneimneh, EE Yaz, MT misleads ECG anno- tators from accurate identification of the ECG features. Previous work that deals with baseline wandering re- moval requires the identification of the QRS complex or other ECG features prior

Povinelli, Richard J.

447

How to Apply??? Students wishing to apply for a position in the  

E-Print Network [OSTI]

as grounds maintenance and landscaping responsibilities. Work Schedule: The workHow to Apply??? Students wishing to apply for a position in the landscape your application package to: Cranbrook Educational Community Landscape Horticulture

448

Vehicle Technologies Office: Applied Battery Research  

Broader source: Energy.gov [DOE]

Applied battery research addresses the barriers facing the lithium-ion systems that are closest to meeting the technical energy and power requirements for hybrid electric vehicle (HEV) and electric...

449

Applied Field Research Initiative Deep Vadose Zone  

Broader source: Energy.gov (indexed) [DOE]

Applied Field Research Initiative Applied Field Research Initiative Deep Vadose Zone Located on the Hanford Site in Richland, Washington, the Deep Vadose Zone Applied Field Research Initiative (DVZ AFRI) was established to protect water resources by addressing the challenge of preventing contamination in the deep vadose zone from reaching groundwater. Led by the Pacific Northwest National Laboratory, the Initiative is a collaborative effort that leverages Department of Energy (DOE) investments in basic science and applied research and the work of site contractors to address the complex deep vadose zone contamination challenges. Challenge Many vadose zone environments within the DOE complex consist of complex stratified layers of unconsolidated and water-unsaturated sediments that are, in many places, con-

450

Roadmap: Applied Engineering Applied Engineering and Technology Management Bachelor of Science  

E-Print Network [OSTI]

Roadmap: Applied Engineering ­ Applied Engineering and Technology Management ­ Bachelor of Science [AT-BS-AENG-AETM] College of Applied Engineering, Sustainability and Technology Catalog Year: 2013­2014 Page 1 of 2 | Last Updated: 28-Feb-13/JS This roadmap is a recommended semester-by-semester plan

Sheridan, Scott

451

Roadmap: Applied Engineering Applied Engineering and Technology Management Bachelor of Science  

E-Print Network [OSTI]

Roadmap: Applied Engineering ­ Applied Engineering and Technology Management ­ Bachelor of Science [AT-BS-AENG-AETM] College of Applied Engineering, Sustainability and Technology Catalog Year: 2012­2013 Page 1 of 2 | Last Updated: 21-May-12/JS This roadmap is a recommended semester-by-semester plan

Sheridan, Scott

452

Roadmap: Technical and Applied Studies -Computer Technology General -Bachelor of Technical and Applied Studies  

E-Print Network [OSTI]

Roadmap: Technical and Applied Studies - Computer Technology General - Bachelor of Technical;Roadmap: Technical and Applied Studies - Computer Technology General - Bachelor of Technical and Applied-Mar-14/JSK This roadmap is a recommended semester-by-semester plan of study for this major. However

Khan, Javed I.

453

Microsoft Word - EC Sodium coolant removal.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

1 1 SECTION A. Project Title: MFC - EBR-II Sodium Removal/RCRA Closure Activities SECTION B . Project Description The proposed action will remove the sodium from the Experimental Breeder Reactor (EBR)-II piping system and tanks to achieve clean-closure for eventual decommissioning, deactivation and demolition (DD&D). The clean-closure will be completed in compliance with the EBR-II Hazardous Waste Management Act/Resource Conservation and Recovery Act (HWMA/RCRA) Storage and Treatment Permit PER-120, which includes the closure plan. EBR-II is located at the Materials and Fuels Complex at the Idaho National Laboratory. The EBR-II DD&D actions will be addressed under the Comprehensive Environmental Response Compensation, and Liability Act, specifically, the Engineering Evaluation/Cost

454

Study of Alternative Approaches for Transite Panel Removal  

Broader source: Energy.gov (indexed) [DOE]

East Tennessee Technology Park Tennessee Washington Study of Alternative Approaches for Transite Panel Removal Challenge Large facilities operated by the U.S. Department of Energy (DOE) such as the Gaseous Diffusion Plant at Oak Ridge, TN and the former processing facilities at Hanford, WA are paneled entirely with transite siding (an early form of cement composite drywall panel containing up to 50% asbestos). Asbestos removal raises important worker safety issues. The panels must be treated as non-friable asbestos (Category II) with the potential of becoming friable if broken or crushed. Asbestos is considered friable if, when dry, it can be crumbled, pulverized or reduced to powder by hand pressure. These facilities comprise millions of square feet of transite which must be

455

Process for removing sulfate anions from waste water  

DOE Patents [OSTI]

A liquid emulsion membrane process for removing sulfate anions from waste water is disclosed. The liquid emulsion membrane process includes the steps of: (a) providing a liquid emulsion formed from an aqueous strip solution and an organic phase that contains an extractant capable of removing sulfate anions from waste water; (b) dispersing the liquid emulsion in globule form into a quantity of waste water containing sulfate anions to allow the organic phase in each globule of the emulsion to extract and absorb sulfate anions from the waste water and (c) separating the emulsion including its organic phase and absorbed sulfate anions from the waste water to provide waste water containing substantially no sulfate anions.

Nilsen, David N. (Lebanon, OR); Galvan, Gloria J. (Albany, OR); Hundley, Gary L. (Corvallis, OR); Wright, John B. (Albany, OR)

1997-01-01T23:59:59.000Z

456

Removal of arsenic compounds from spent catecholated polymer  

DOE Patents [OSTI]

Described is a process for removing arsenic from petroliferous derived liquids by contacting said liquid at an elevated temperature with a divinylbenzene-crosslinked polystyrene having catechol ligands anchored thereon. Also, described is a process for regenerating spent catecholated polystyrene by removal of the arsenic bound to it from contacting petroliferous liquid as described above and involves: a. treating said spent catecholated polystyrene, at a temperature in the range of about 20.degree. to 100.degree. C. with an aqueous solution of at least one carbonate and/or bicarbonate of ammonium, alkali and alkaline earth metals, said solution having a pH between about 8 and 10 and, b. separating the solids and liquids from each other. Preferably the regeneration treatment is in two steps wherein step (a) is carried out with an aqueous alcoholic carbonate solution containing lower alkyl alcohol, and, steps (a) and (b) are repeated using a bicarbonate.

Fish, Richard H. (Berkeley, CA)

1985-01-01T23:59:59.000Z

457

Correlations in Intermediate Energy Two-Proton Removal Reactions  

Science Journals Connector (OSTI)

We report final-state-exclusive measurements of the light charged fragments in coincidence with Ne26 residual nuclei following the direct two-proton removal from a neutron-rich Mg28 secondary beam. A Dalitz-plot analysis and comparisons with simulations show that a majority of the triple-coincidence events with two protons display phase-space correlations consistent with the (two-body) kinematics of a spatially correlated pair-removal mechanism. The fraction of such correlated events, 56(12)%, is consistent with the fraction of the calculated cross section, 64%, arising from spin S=0 two-proton configurations in the entrance-channel (shell-model) Mg28 ground state wave function. This result promises access to an additional and more specific probe of the spin and spatial correlations of valence nucleon pairs in exotic nuclei produced as fast secondary beams.

K. Wimmer et al.

2012-11-16T23:59:59.000Z

458

Negative kinetic energy term of general relativity and its removing  

E-Print Network [OSTI]

We first present a new Lagrangian of general relativity, which can be divided into kinetic energy term and potential energy term. Taking advantage of vierbein formalism, we reduce the kinetic energy term to a sum of five positive terms and one negative term. Some gauge conditions removing the negative kinetic energy term are discussed. Finally, we present a Lagrangian that only include positive kinetic energy terms. To remove the negative kinetic energy term leads to a new field equation of general relativity in which there are at least five equations of constraint and at most five dynamical equations, this characteristic is different from the normal Einstein field equation in which there are four equations of constraint and six dynamical equations.

T. Mei

2009-03-30T23:59:59.000Z

459

Apparatus for removing hydrocarbon contaminants from solid materials  

DOE Patents [OSTI]

A system for removing hydrocarbons from solid materials. Contaminated solids are combined with a solvent (preferably terpene based) to produce a mixture. The mixture is washed with water to generate a purified solid product (which is removed from the system) and a drainage product. The drainage product is separated into a first fraction (consisting mostly of contaminated solvent) and a second fraction (containing solids and water). The first fraction is separated into a third fraction (consisting mostly of contaminated solvent) and a fourth fraction (containing residual solids and water). The fourth fraction is combined with the second fraction to produce a sludge which is separated into a fifth fraction (containing water which is ultimately reused) and a sixth fraction (containing solids). The third fraction is then separated into a seventh fraction (consisting of recovered solvent which is ultimately reused) and an eighth fraction (containing hydrocarbon waste).

Bala, Gregory A. (Idaho Falls, ID); Thomas, Charles P. (Idaho Falls, ID)

1996-01-01T23:59:59.000Z

460

Method for removing hydrocarbon contaminants from solid materials  

DOE Patents [OSTI]

A system for removing hydrocarbons from solid materials. Contaminated solids are combined with a solvent (preferably terpene based) to produce a mixture. The mixture is washed with water to generate a purified solid product (which is removed from the system) and a drainage product. The drainage product is separated into a first fraction (consisting mostly of contaminated solvent) and a second fraction (containing solids and water). The first fraction is separated into a third fraction (consisting mostly of contaminated solvent) and a fourth fraction (containing residual solids and water). The fourth fraction is combined with the second fraction to produce a sludge which is separated into a fifth fraction (containing water which is ultimately reused) and a sixth fraction (containing solids). The third fraction is then separated into a seventh fraction (consisting of recovered solvent which is ultimately reused) and an eighth fraction (containing hydrocarbon waste).

Bala, Gregory A. (Idaho Falls, ID); Thomas, Charles P. (Idaho Falls, ID)

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Removal and determination of trimethylsilanol from the landfill gas  

Science Journals Connector (OSTI)

The removal and determination of trimethylsilanol (TMSOH) in landfill gas has been studied before and after the special E3000-ITC System. The system works according to principle of temperature swing. The performance of TMSOH and humidity removal was 20% and more than 90%, respectively. The six of active carbons and impinger method were tested on the full-scale landfill in Poland for TMSOH and siloxanes determination. The extraction method and absorption in acetone were used. The concentration of TMSOH and siloxanes were found in range from 23.6 to 29.2mg/m3 and from 18.0 to 38.9mg/m3, respectively. The content of TMSOH in biogas originating from landfill was 41% out of all siloxanes. Moreover, the used system is alternative to other existing technique of landfill gas purification.

Grzegorz Piechota; Manfred Hagmann; Roman Buczkowski

2012-01-01T23:59:59.000Z

462

Method for removing metal ions from solution with titanate sorbents  

DOE Patents [OSTI]

A method for removing metal ions from solution comprises the steps of providing titanate particles by spray-drying a solution or slurry comprising sorbent titanates having a particle size up to 20 micrometers, optionally in the presence of polymer free of cellulose functionality as binder, said sorbent being active towards heavy metals from Periodic Table (CAS version) Groups IA, IIA, IB, IIB, IIIB, and VIII, to provide monodisperse, substantially spherical particles in a yield of at least 70 percent of theoretical yield and having a particle size distribution in the range of 1 to 500 micrometers. The particles can be used free flowing in columns or beds, or entrapped in a nonwoven, fibrous web or matrix or a cast porous membrane, to selectively remove metal ions from aqueous or organic liquid.

Lundquist, Susan H. (White Bear Township, MN); White, Lloyd R. (Minneapolis, MN)

1999-01-01T23:59:59.000Z

463

Noise removal from measurements while drilling an oil well  

Science Journals Connector (OSTI)

Systems to acquire borehole data during the drilling of oil and gas wells make use of measurement while drilling (MWD). One feature of this system is that it is able to do real?time measuring from a borehole; therefore there has been a lot of MWD use on drilling sites in recent years. There are a few types of MWD. Mud pulse?type MWD which uses a drilling circuit fluid is superior to the rest because of its reliability accuracy of data and less disturbance of the drilling schedule. The drilling circuit fluid is raised to a high pressure by a mud pump; borehole data which are recorded by the surface measuring system are contaminated by the pumping noise. Therefore it is necessary to remove the pumping noise to get objective data. This report describes the pumping noise removal system and the method used for the telemetry system from 2000 m depth.

Kazuho Hosono; Haruki Moriyama

1996-01-01T23:59:59.000Z

464

Removing Barriers to Innovations: Related Codes and Standards CSI Team  

Broader source: Energy.gov (indexed) [DOE]

Removing Barriers to Innovation Removing Barriers to Innovation Related Codes and Standards CSI Team PAM COLE Pacific Northwest National Laboratory Building America Technical Update Meeting, April 29-30, 2013, Denver, CO PNNL-SA-95120 Background/History Transformation of U.S. housing markets to favor high- performance homes faces significant challenges, from education to technology to infrastructure and cost barriers. Some of the most difficult challenges involve industry codes and standards that may prevent or slow the innovation process. Building America Research has a history of: Successful market innovations and transformation and overcoming codes and standards barriers. Top 3 Existing Innovations C/S Challenges Thermal Bypass Air Barrier Requirements: Building America research teams effectively

465

More Economical Sulfur Removal for Fuel Processing Plants  

Broader source: Energy.gov (indexed) [DOE]

enabled TDA to develop and commercialize its direct oxidation process-a simple, catalyst-based system for removing sulfur from natural gas and petroleum-that was convenient and economical enough for smaller fuel processing plants to use. TDA Research, Inc. (TDA) of Wheat Ridge, CO, formed in 1987, is a privately-held R&D company that brings products to market either by forming internal business

466

Alternatives Generation Analysis Long Length Contaminated Equipment Removal System Storage  

SciTech Connect (OSTI)

The long length contaminated equipment was designed and built to aid in the remote removal and transport of highly radioactive, contaminated equipment from various locations in the tank farms to disposal. The equipment has been stored in an open lay-down yard area, exposed to the elements for the past year and a half. The possible alternatives available to provide shelter for the equipment are investigated.

BOGER, R.M.

1999-08-13T23:59:59.000Z

467

Removal of arsenites onto akaganeite-type adsorbents  

Science Journals Connector (OSTI)

In this study, arsenites removal from aqueous solutions was investigated using synthetic prepared nanocrystalline akaganeite. The effects of various parameters, such as the solution pH, the ionic strength, the contact time of sorbent material with the treated solution, and the pollutant initial concentration have been investigated during this study. Typical adsorption isotherms were determined, which were found to sufficiently fit the typical Langmuir equation. The mechanism of sorption was examined by Fourier transmission infrared and X-ray photoelectron spectroscopy measurements.

E.A. Deliyanni; E.N. Peleka; K.A. Matis

2008-01-01T23:59:59.000Z

468

Active Space Debris Removal using Capture and Ejection  

E-Print Network [OSTI]

object as well as its launch vehicle and parts thereof." Based on this de ni- tion, space debris are uncontrolled space objects serving no function, such as expired satellites, jettisoned components, and collision shrapnel. Traveling at speeds around.... Many alternative proposals to remove space debris have been made: laser impingement [5], ground-based laser design \\Project Orion" [3], ion guns [4], remote vehicles that capture debris and return to a central station [6], passively intercepting...

Missel, Jonathan William

2013-04-25T23:59:59.000Z

469

Sequestering agents for the removal of actinides from waste streams  

SciTech Connect (OSTI)

The ultimate goal of this project is to develop new separation technologies to remove radioactive metal ions from contaminated DOE sites. To this end we are studying both the fundamental chemistry and the extractant properties of some chelators that are either found in nature or are closely related to natural materials. The work is a collaboration betwen Lawrence Berkeley National Laboratory-University of California, Berkeley, and the Glenn T. Seaborg Institute for Transactinium Science at Lawrence Livermore National Laboratory.

Raymond, K.; White, D. [Univ. of California, Berkeley, CA (United States); Whisenhunt, D. [Lawrence Livermore National Lab., CA (United States)

1996-10-01T23:59:59.000Z

470

Inflatable containment diaphragm for sealing and removing stacks  

DOE Patents [OSTI]

A diaphragm with an inflatable torus-shaped perimeter is used to seal at least one end of a stack so that debris that might be hazardous will not be released during removal of the stack. A diaphragm is inserted and inflated in the lower portion of a stack just above where the stack is to be cut such that the perimeter of the diaphragm expands and forms a seal against the interior surface of the stack.

Meskanick, G.R.; Rosso, D.T.

1993-04-13T23:59:59.000Z

471

Sodium removal process development for LMFBR fuel subassemblies  

SciTech Connect (OSTI)

Two 37-pin scale models of Clinch River Breeder Reactor Plant fuel subassemblies were designed, fabricated and used at Westinghouse Advanced Reactors Division in the development and proof-testing of a rapid water-based sodium removal process for the ORNL Hot Experimental Facility, Liquid Metal Fast Breeder Reactor Fuel Reprocessing Cycle. Through a series of development tests on one of the models, including five (5) sodium wettings and three (3) high temperature sodium removal operations, optimum process parameters for a rapid water vapor-argon-water rinse process were identified and successfully proof-tested on a second model containing argon-pressurized, sodium-corroded model fuel pins simulating the gas plenum and cladding conditions expected for spent fuel pins in full scale subassemblies. Based on extrapolations of model proof test data, preliminary process parameters for a water vapor-nitrogen-water rinse process were calculated and recommended for use in processing full scale fuel subassemblies in the Sodium Removal Facility of the Fuel Receiving Cell, ORNL HEF.

Simmons, C.R.; Taylor, G.R.

1981-10-01T23:59:59.000Z

472

BOA: Pipe-asbestos insulation removal robot system  

SciTech Connect (OSTI)

This paper describes the BOA system, a mobile pipe-external crawler used to remotely strip and bag (possibly contaminated) asbestos-containing lagging and insulation materials (ACLIM) from various diameter pipes in (primarily) industrial installations across the DOE weapons complex. The mechanical removal of ACLIM is very cost-effective due to the relatively low productivity and high cost involved in human removal scenarios. BOA, a mechanical system capable of removing most forms of lagging (paper, plaster, aluminum sheet, clamps, screws and chicken-wire), and insulation (paper, tar, asbestos fiber, mag-block) uses a circular cutter and compression paddles to cut and strip the insulation off the pipe through compression, while a HEPA-filter and encapsulant system maintain a certifiable vacuum and moisture content inside the system and on the pipe, respectively. The crawler system has been built and is currently undergoing testing. Key design parameters and performance parameters are developed and used in performance testing. Since the current system is a testbed, we also discuss future enhancements and outline two deployment scenarios (robotic and manual) for the final system to be designed and completed by the end of FY `95. An on-site demonstration is currently planned for Fernald in Ohio and Oak Ridge in Tennessee.

Schempf, H.; Bares, J.; Mutschler, E. [and others

1995-12-31T23:59:59.000Z

473

Pentek metal coating removal system: Baseline report; Summary  

SciTech Connect (OSTI)

The Pentek metal coating removal system consists of the ROTO-PEEN Scaler, CORNER-CUTTER(R), and VAC-PAC(R). The system is designed to remove coatings from steel, concrete, brick, and wood. The Scaler uses 3M ROTO-PEEN tungsten carbide cutters, while the CORNER-CUTTER(R) uses solid needles for descaling activities. These are used with the VAC-PAC(R) vacuum system to capture dust and debris as removal of the coating takes place. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. Dust exposure was minimal, but noise exposure was significant. Further testing for each exposure is recommended, since the outdoor environment where the testing demonstration took place may skew the results. It is feasible that dust and noise levels will be higher in an enclosed operating environment. Other areas of concern found were arm-hand vibration, whole-body vibration, ergonomics, heat stress, tripping hazards, electrical hazards, machine guarding, and lockout/tagout.

NONE

1997-07-31T23:59:59.000Z

474

Process for off-gas particulate removal and apparatus therefor  

DOE Patents [OSTI]

In the event of a breach in the off-gas line of a melter operation requiring closure of the line, a secondary vessel vent line is provided with a particulate collector utilizing atomization for removal of large particulates from the off-gas. The collector receives the gas containing particulates and directs a portion of the gas through outer and inner annular channels. The collector further receives a fluid, such as water, which is directed through the outer channel together with a second portion of the particulate-laden gas. The outer and inner channels have respective ring-like termination apertures concentrically disposed adjacent one another on the outer edge of the downstream side of the particulate collector. Each of the outer and inner channels curves outwardly away from the collector's centerline in proceeding toward the downstream side of the collector. Gasflow in the outer channel maintains the fluid on the channel's wall in the form of a "wavy film," while the gas stream from the inner channel shears the fluid film as it exits the outer channel in reducing the fluid to small droplets. Droplets formed by the collector capture particulates in the gas stream by one of three mechanisms: impaction, interception or Brownian diffusion in removing the particulates. The particulate-laden droplets are removed from the fluid stream by a vessel vent condenser or mist eliminator.

Carl, Daniel E. (Orchard Park, NY)

1997-01-01T23:59:59.000Z

475

Process for off-gas particulate removal and apparatus therefor  

DOE Patents [OSTI]

In the event of a breach in the off-gas line of a melter operation requiring closure of the line, a secondary vessel vent line is provided with a particulate collector utilizing atomization for removal of large particulates from the off-gas. The collector receives the gas containing particulates and directs a portion of the gas through outer and inner annular channels. The collector further receives a fluid, such as water, which is directed through the outer channel together with a second portion of the particulate-laden gas. The outer and inner channels have respective ring-like termination apertures concentrically disposed adjacent one another on the outer edge of the downstream side of the particulate collector. Each of the outer and inner channels curves outwardly away from the collector`s centerline in proceeding toward the downstream side of the collector. Gas flow in the outer channel maintains the fluid on the channel`s wall in the form of a ``wavy film,`` while the gas stream from the inner channel shears the fluid film as it exits the outer channel in reducing the fluid to small droplets. Droplets formed by the collector capture particulates in the gas stream by one of three mechanisms: impaction, interception or Brownian diffusion in removing the particulates. The particulate-laden droplets are removed from the fluid stream by a vessel vent condenser or mist eliminator. 4 figs.

Carl, D.E.

1997-10-21T23:59:59.000Z

476

Applied Process Engineering Laboratory | Open Energy Information  

Open Energy Info (EERE)

Applied Process Engineering Laboratory Applied Process Engineering Laboratory Name Applied Process Engineering Laboratory Address 350 Hills Street, Suite #101 Place Richland, Washington Zip 99354 Region Pacific Northwest Area Coordinates 46.3389754°, -119.2716263° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":46.3389754,"lon":-119.2716263,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

477

Modeling International Relationships in Applied General Equilibrium  

Open Energy Info (EERE)

Modeling International Relationships in Applied General Equilibrium Modeling International Relationships in Applied General Equilibrium (MIRAGE) Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: Modeling International Relationships in Applied General Equilibrium (MIRAGE) Agency/Company /Organization: International Food Policy Research Institute, Centre d'Etudes Prospectives et d'Informations Internationales (CEPII) Focus Area: Economic Development Topics: Co-benefits assessment, - Macroeconomic Resource Type: Software/modeling tools User Interface: Desktop Application Complexity/Ease of Use: Moderate Website: www.ifpri.org/book-5076/ourwork/program/mirage-model RelatedTo: Global Trade Analysis Project (GTAP) Data Base

478

How to Apply | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

How to Apply How to Apply How to Apply Awards are made through a formal process that has changed dramatically since 2011. So let us walk you through it step by step. "Innovation pays." - John Kao, Innovation Nation Submit a Letter of Intent On October 28, 2013, the U.S. Department of Energy (DOE) announced on the DOE SBIR website a preview version of the technical topics for which it will later accept funding applications. These topics will be found on the DOE's Funding Opportunity Announcements page. The EE SBIR page lists those topics that are cleantech (specific to EERE). We also recommend that you sign up for the EE-SBIR and DOE-SBIR mailing lists. The EE SBIR mailing list signup is at https://public.govdelivery.com/accounts/USEERE/subscriber/new?topic_id=USEERE_442.

479

Applied Field Research Initiative Attenuation Based Remedies  

Broader source: Energy.gov (indexed) [DOE]

PA00133 - March 2011 PA00133 - March 2011 Applied Field Research Initiative Attenuation Based Remedies in the Subsurface Located at the Savannah River Site in Aiken, South Carolina, the Attenuation-Based Remedies in the Subsurface Applied Field Research Initiative (ABRS AFRI) was established to develop the tools, approaches and technologies that will be required to address the technical challenges associated characteriza- tion, remediation and long-term monitoring of recalcitrant compounds in the subsurface at Department of Energy (DOE) Environmental Management (EM) sites. The ABRS AFRI site provides a unique setting for researchers in both applied and basic science fields. A wealth of subsurface data is available to support research activities and remedial decision making.

480

Applied Ventures LLC | Open Energy Information  

Open Energy Info (EERE)

Applied Ventures LLC Applied Ventures LLC Name Applied Ventures LLC Address 3050 Bowers Avenue Place Santa Clara, California Zip 95054 Region Southern CA Area Product Venture capital. Number of employees 1-10 Phone number (408) 727-5555 Website http://www.appliedventures.com Coordinates 37.37751°, -121.978721° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.37751,"lon":-121.978721,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "removal cxs applied" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

MULTIPLE POLLUTANT REMOVAL USING THE CONDENSING HEAT EXCHANGER  

SciTech Connect (OSTI)

The Integrated Flue Gas Treatment (IFGT) system is a new concept whereby a Teflon covered condensing heat exchanger is adapted to remove certain flue gas constituents, both particulate and gaseous, while recovering low level heat. The pollutant removal performance and durability of this device is the subject of a USDOE sponsored program to develop this technology. The program was conducted under contract to the United States Department of Energy?s Fossil Energy Technology Center (DOE-FETC) and was supported by the Ohio Coal Development Office (OCDO) within the Ohio Department of Development, the Electric Power Research Institute?s Environmental Control Technology Center (EPRI-ECTC) and Babcock and Wilcox - a McDermott Company (B&W). This report covers the results of the first phase of this program. This Phase I project has been a two year effort. Phase I includes two experimental tasks. One task dealt principally with the pollutant removal capabilities of the IFGT at a scale of about 1.2MWt. The other task studied the durability of the Teflon covering to withstand the rigors of abrasive wear by fly ash emitted as a result of coal combustion. The pollutant removal characteristics of the IFGT system were measured over a wide range of operating conditions. The coals tested included high, medium and low-sulfur coals. The flue gas pollutants studied included ammonia, hydrogen chloride, hydrogen fluoride, particulate, sulfur dioxide, gas phase and particle phase mercury and gas phase and particle phase trace elements. The particulate removal efficiency and size distribution was investigated. These test results demonstrated that the IFGT system is an effective device for both acid gas absorption and fine particulate collection. Although soda ash was shown to be the most effective reagent for acid gas absorption, comparative cost analyses suggested that magnesium enhanced lime was the most promising avenue for future study. The durability of the Teflon covered heat exchanger tubes was studied on a pilot-scale single- stage condensing heat exchanger (CHX ). This device was operated under typical coal-fired flue gas conditions on a continuous basis for a period of approximately 10 months. Data from the test indicate that virtually no decrease in Teflon thickness was observed for the coating on the first two rows of heat exchanger tubes, even at high inlet particulate loadings. Evidence of wear was present only at the microscopic level, and even then was very minor in severity.

B.J. JANKURA; G.A. KUDLAC; R.T. BAILEY

1998-06-01T23:59:59.000Z

482

Meta-analysis in applied ecology  

Science Journals Connector (OSTI)

...varied with time, not space, suggesting that local...across species, sites, space and time. Applied ecologists...August 2009). An initial library of more than 500 analyses...pointers from medicine and public health. Conserv. Biol...effects across species, space and time, but exploring...

2010-01-01T23:59:59.000Z

483

APPLIED MATHEMATICS & COMPUTATIONAL SCI. (AS) {AMCS}  

E-Print Network [OSTI]

APPLIED MATHEMATICS & COMPUTATIONAL SCI. (AS) {AMCS} 510. (MATH410) Complex Analysis. 520. (MATH420. (MATH432) Game Theory. 567. (BE 567) Mathematical and Computational Modeling of Biological Systems. (M) Prerequisite(s): BE 324 and BE 350. This is an introductory course in mathematical biology. The emphasis

Carpick, Robert W.

484

Uniform insulation applied-B ion diode  

DOE Patents [OSTI]

An applied-B field extraction ion diode has uniform insulation over an anode surface for increased efficiency. When the uniform insulation is accomplished with anode coils, and a charge-exchange foil is properly placed, the ions may be focused at a point on the z axis.

Seidel, David B. (Albuquerque, NM); Slutz, Stephen A. (Albuquerque, NM)

1988-01-01T23:59:59.000Z

485

Applying Knowledge Management techniques for building corporate  

E-Print Network [OSTI]

Applying Knowledge Management techniques for building corporate memories Ian Watson AI-CBR Computer-based reasoning and knowledge management... www.ai-cbr.org ...coincidentally I've just written a book about this... ...plug the book!!! www.ai-cbr.org Outline · Talk about ­ Knowledge ­ Knowledge management ­ Why CBR

Watson, Ian

486

Applying Quantitative Marketing Techniques to the Internet  

E-Print Network [OSTI]

. Blattberg and Deighton [1991] laid out a good framework for Internet marketing in their articleApplying Quantitative Marketing Techniques to the Internet by Alan L. Montgomery Carnegie Mellon with clickstream data. I illustrate these four modeling techniques and discuss their potential for solving Internet

Faloutsos, Christos

487

Faculty of Engineering Bachelor of Applied Science  

E-Print Network [OSTI]

and Environmental Engineering; Electrical Engineering; Industrial Engineering and Mechanical, Automotive & MaterialsFaculty of Engineering Bachelor of Applied Science in Engineering The demands on professional engineers around the world are increasing in terms of what they must address: our society must confront

488

Applying Global Optimization in Structural Engineering  

E-Print Network [OSTI]

structure Dynamic loading Challenges "Dwarfing visitors, the 70-foot-tall Corliss steam engine powered steam engine in the world. Of engines like the Corliss, William Dean Howells wrote, 'In these thingsApplying Global Optimization in Structural Engineering Dr. George F. Corliss Electrical

489

NONLOCAL COMPUTATIONAL METHODS APPLIED TO COMPOSITE STRUCTURES  

E-Print Network [OSTI]

to model the degradation of organic or ceramic matrix composites structures (OMC or CMC) even under simple description of heterogeneous materia ls like organic or ceramic matrix composites. New sophisticatedNONLOCAL COMPUTATIONAL METHODS APPLIED TO COMPOSITE STRUCTURES N. GERMAIN1, F. FEYEL1 and J. BESSON

Boyer, Edmond

490

Building on a Base: Applying Physics Education  

E-Print Network [OSTI]

Building on a Base: Applying Physics Education Research to Physics Teaching S.J. Pollock CU Boulder Concept Inventory (FCI) R. Hake, "...A six-thousand-student survey..." AJP 66, 64-74 (`98). = post. Pre R. App. Pre R. Care. Pre Math Pre Effort Pre Skept. Pre Overall Post Indep. Post Coher. Post Conc

Colorado at Boulder, University of

491

APPLYING THE ZACHMAN FRAMEWORK DIMENSIONS TO SUPPORT  

E-Print Network [OSTI]

APPLYING THE ZACHMAN FRAMEWORK DIMENSIONS TO SUPPORT BUSINESS PROCESS MODELING Pedro Sousa123.caetano, jose.tribolet}@inov.pt Business process models assist business and information technology managers with disparate blueprints for the same process and no formal procedures to sort out their relevance. In fact

492

Does Bertrand's rule apply to macronutrients?  

Science Journals Connector (OSTI)

...gastrointestinal system. In Handbook of physiology. Section 13 comparative...Christensen2001Optimal diet theory: when does it work, and when and why does it fail?. Anim. Behav. 61...Nutr. Soc. 60, 145-156. Does Bertrand's rule apply to macronutrients...

2005-01-01T23:59:59.000Z

493

Governing factors for motor oil removal from water with different sorption materials  

Science Journals Connector (OSTI)

This paper has been focused on the sorbent efficiency for motor oil removal from water. Two types of sorbents were investigated: organic and inorganic. Natural wool fibers (NWFs) and recycled-wool-based nonwoven material (RWNM)) were tested as organic type of sorbents. Sepiolite, bentonite and zeolite have been chosen as representative inorganic sorbents. Sorption was carried out in batch sorption system. Efficiency of oil removal was determined by measuring the oil concentration before and after the sorption process. Extractive-gravimetric method and refractive index determination have been applied as analytical methods for determination of oil concentration in water. Governing factors for sorbent efficiency were proposed, analysed and compared. It was concluded that sorption process is mostly affected by mass of sorbent, sorption time, temperature and pH value of water. NWFs, which were the most efficient sorbent showed maximal efficiency and maximal sorption capacity: 0.1g of \\{NWFs\\} after 10min at 20C and pH 8.00 sorbed 3.3g of motor oil from 300mL of water polluted with 4.5g of motor oil. Maximal efficiency for all sorbents investigated was reached after 30min of sorption processes, it was 95.0% for NWF, 43.0% for NRWM, 20.7% for sepiolite, 19.6% for bentonite and 21.2% for zeolite. Physical adsorption onto all sorbents is a favorable process (sorption efficiency decrease with increasing temperature) while sorption onto bentonite and zeolite is a result of both physical adsorption and chemisorption (sorption efficiency increase with increasing temperature, up to 80C).

V. Rajakovi?-Ognjanovi?; G. Aleksi?; Lj. Rajakovi?

2008-01-01T23:59:59.000Z

494

Crop Residue Removal for Bioenergy Reduces Soil Carbon Pools: How Can We Offset Carbon Losses?  

Science Journals Connector (OSTI)

Crop residue removal for bioenergy can deplete soil organic carbon (SOC) ... been, however, widely discussed. This paper reviews potential practices that can be used to offset the SOC lost with residue removal. Literature

Humberto Blanco-Canqui

2013-03-01T23:59:59.000Z

495

Removal of pertechnetate from simulated nuclear waste streams using supported zerovalent iron  

E-Print Network [OSTI]

be to use a technetium ion- exchange or sorbent materialtechnetium problem is to remove pertechnetate from the waste using commercially available polymeric ion exchangetechnetium-containing eluate that would be generated in removing pertechnetate from the commercial ion-exchange

Darab, John

2008-01-01T23:59:59.000Z

496

Study on HCl removal for medical waste pyrolysis and combustion using a TG-FTIR analyzer  

Science Journals Connector (OSTI)

Under both pyrolysis and combustion condition, HCl removal efficiency for medical waste with Cabased additives was semi-quantitatively studied by means of ... TG-FTIR. Additionally, the difference of HCl removal ...

Hongmei Zhu; Weiying Chen; Xuguang Jiang

2014-02-01T23:59:59.000Z

497

Medial Amygdala Response after Vomeronasal Organ Removal to Territorial, Reproductive and Predator Stimuli  

E-Print Network [OSTI]

Medial Amygdala Response after Vomeronasal Organ Removal to Territorial, Reproductive and Predator categorically depending on the type of stimuli presented. Using removal of the vomeronasal organ (VNX), we animals and additional stimuli, necessary to confirm categorization, are ongoing. Concurrent experiments

Hull, Elaine

498

1,153-ton Waste Vault Removed from 300 Area - Vault held waste...  

Energy Savers [EERE]

1,153-ton Waste Vault Removed from 300 Area - Vault held waste tanks with contamination from Hanford's former laboratory facilities 1,153-ton Waste Vault Removed from 300 Area -...

499

E-Print Network 3.0 - atmospheric methane removal Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

from the U-trap, remove carbon and hydrogen impurities, oxidize the purified methane to CO2 and H2... . The helium gas was recycled through the U-trap (1) to remove and purify...

500

High-Risk Components Removed from K-25s Tc-99 Area  

Broader source: Energy.gov [DOE]

Oak Ridge's EM program removes one of the highest risk components remaining in K-25 building with the successful crane removal of five components known as NaF traps.