Powered by Deep Web Technologies
Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Remote operation of the TFTR BES experiment from an off-site location  

SciTech Connect

The capability of controlling a diagnostic subsystem and interactively participating in the experimental program on Tokamak Fusion Test Reactor (TFTR) from a remote site has been developed and demonstrated on the TFTR BES experiment. Interactive communications are established from multiscreen remote workstations at the University of Wisconsin to the Princeton Plasma Physics Laboratory VAX cluster via multiple terminal sessions across the InterNet national network. Full control of the diagnostic, access to all relevant machine parameters and wave forms, and operations run logs are all available with automatic updates between plasma shots. A real-time count-down shot clock with timer, machine event status, and shot number provides a real-time interface to the TFTR shot sequence. This means of remote participation in a central fusion experiment provides vital experience for extrapolation to implementation on an ignition device to test engineering concepts.

Fonck, R.J.; Cosby, G.; Durst, R. (Department of Nuclear Engineering and Engineering Physics, University of Wisconsin-Madison, Madison, Wisconsin 53706 (United States)); Gibney, T.; Thompson, M.; Paul, S.F. (Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States))

1992-10-01T23:59:59.000Z

2

SOLERAS - solar applications in remote locations  

Science Conference Proceedings (OSTI)

The purpose of this international technology workshop was to promote the exchange of research information on solar applications in remote locations. Scientists and engineers from the United States, Saudia Arabia, Central and South America, Southeast Asia, and Oceania were represented at this sixth annual workshop conducted under the auspices of the SOLERAS program. The objective of the workshop was to address the issues of construction, operation, and maintenance of solar energy systems in remote locations. Photovoltaic, wind, solar thermal, biomass, and geothermal technologies were considered. Also considered was the use of solar energy for agricultural purposes. Each paper has been separately indexed for inclusion in the Energy Data Base.

Khoshaim, B.H.; Williamson, J.S.; Meiners, A.; Mallory, R. (eds.)

1985-05-01T23:59:59.000Z

3

Mobile Truck Stop Electrification Site Locator  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Truck Stop Electrification Site Locator Location Enter a city, postal code, or address Search Caution: The AFDC recommends that users verify that sites are open prior to making a...

4

Detecting, Locating, and Characterizing Remote Power Sources  

SciTech Connect

A feasibility study to determine range and back-azimuth detection methods for an isolated generator powering common loads was completed. The study deployed 3-component E and B field sensors with sampling rates of 100 kHz in a low noise test location in Southern California. Scripted power and load cycling was recorded at ranges of 40 meters to 4 km from the generator/load source. Three loads were tested: a 100 meter string of lights, an inverter powering an air blower, and a resistive heater. No E-field or B-field radiated signals were detected at ranges greater than 40 meters with a signal-to-noise ratio greater than one. Large variations in the broadband background electromagnetic noise were observed and may have been responsible for null detections at some measurement locations. At the 40-meter station, a frequency shift upon generator loading was observed for all load types. Harmonics from the detuned generator (operating at 56.7 Hz) could be observed for all load types but were most pronounced for the inverter source. A back-azimuth estimation methodology was applied to detected harmonics with stable and consistent results. For the inverter source, consistent back azimuths to the source were determined for the fundamental and higher detected harmonics up to the 31st. The method was applied to narrow band ''noise'' at 60 Hz and produced bimodal directions that roughly pointed to large population centers. Details of the method are withheld in this report pending a record of invention submittal. Although the generator/load combinations, which utilized wiring that tended to minimize stray signals, cannot yet be detected at large stand-off range without application of noise-filtering methods, the back-azimuth method appears promising and should be applied to other source types and frequency ranges where an E and B field can be detected. A record of invention describing this new back-azimuth method has been submitted to the Intellectual Property Law Group.

Harben, P; Carrigan, C; Kirkendall, B; Simons, D

2005-02-10T23:59:59.000Z

5

Hyperspectral Remote Sensing Techniques For Locating Geothermal Resources |  

Open Energy Info (EERE)

Hyperspectral Remote Sensing Techniques For Locating Geothermal Resources Hyperspectral Remote Sensing Techniques For Locating Geothermal Resources Jump to: navigation, search OpenEI Reference LibraryAdd to library Poster: Hyperspectral Remote Sensing Techniques For Locating Geothermal Resources Abstract Demonstrating the effectiveness of hyperspectral sensors to explore for geothermal resources will be critical to our nation's energy security plans. Discovering new geothermal resources will contribute to established renewable energy capacity and lower our dependence upon fuels that contribute to green house gas emissions. The use of hyperspectral data and derived imagery products is currently helping exploration managers gain greater efficiencies and drilling success. However, more work is needed as geologists continue to learn about hyperspectral imaging and, conversely,

6

V-012: Mozilla Firefox 'window.location' Bugs Permit Cross-Site Scripting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: Mozilla Firefox 'window.location' Bugs Permit Cross-Site 2: Mozilla Firefox 'window.location' Bugs Permit Cross-Site Scripting Attacks and May Let Remote Users Execute Arbitrary Code V-012: Mozilla Firefox 'window.location' Bugs Permit Cross-Site Scripting Attacks and May Let Remote Users Execute Arbitrary Code October 29, 2012 - 6:00am Addthis PROBLEM: Mozilla Firefox 'window.location' Bugs Permit Cross-Site Scripting Attacks and May Let Remote Users Execute Arbitrary Code PLATFORM: Firefox, Thunderbird, SeaMonkey ABSTRACT: Three vulnerabilities were reported in Mozilla Firefox. REFERENCE LINKS: Mozilla Foundation Security Advisory 2012-90 SecurityTracker Alert ID: 1027701 SecurityTracker Alert ID: 1027702 Advisory: RHSA-2012:1407-1 CVE-2012-4194 CVE-2012-4195 CVE-2012-4196 IMPACT ASSESSMENT: High DISCUSSION: A remote user can exploit the valueOf() method of window.location to, in

7

V-012: Mozilla Firefox 'window.location' Bugs Permit Cross-Site Scripting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: Mozilla Firefox 'window.location' Bugs Permit Cross-Site 2: Mozilla Firefox 'window.location' Bugs Permit Cross-Site Scripting Attacks and May Let Remote Users Execute Arbitrary Code V-012: Mozilla Firefox 'window.location' Bugs Permit Cross-Site Scripting Attacks and May Let Remote Users Execute Arbitrary Code October 29, 2012 - 6:00am Addthis PROBLEM: Mozilla Firefox 'window.location' Bugs Permit Cross-Site Scripting Attacks and May Let Remote Users Execute Arbitrary Code PLATFORM: Firefox, Thunderbird, SeaMonkey ABSTRACT: Three vulnerabilities were reported in Mozilla Firefox. REFERENCE LINKS: Mozilla Foundation Security Advisory 2012-90 SecurityTracker Alert ID: 1027701 SecurityTracker Alert ID: 1027702 Advisory: RHSA-2012:1407-1 CVE-2012-4194 CVE-2012-4195 CVE-2012-4196 IMPACT ASSESSMENT: High DISCUSSION: A remote user can exploit the valueOf() method of window.location to, in

8

Remote/New sites: Many Field  

NLE Websites -- All DOE Office Websites (Extended Search)

Remote/New sites: Many Field Remote/New sites: Many Field Campaigns require temporary installations on non-ACRF sites. This requires identification of landowners, negotiation of leases, and infrastructure logistics for electrical and internet connectivity. Argonne National Laboratory is managed by UChicago-Argonne LLC for the U.S. Department of Energy SGP Field Campaigns: The Other Side of Operations Brad W. Orr 1 Dan J. Rusk 2 John Schatz 2 Dan Nelson 2 David Breedlove 2 Douglas L. Sisterson 1 1 Argonne National Laboratory, Argonne, IL 2 ACRF/SGP, Cherokee Nation Distributors, Stilwell, OK Background Implementation All departments must work closely together to implement a campaign. In addition they must have the flexibility to adapt to new and unique instrument deployments. The

9

Location tracking via social networking sites  

Science Conference Proceedings (OSTI)

The use of social media has steadily grown in recent years, and now more than ever, people are logging on to websites like Facebook, Twitter, Foursquare, and Google Latitude with the aim of broadcasting their location information. The ability to 'check ... Keywords: disclosure, intention, location-based services, location-tracking, social networking, trust

Lisa Thomas; Pam Briggs; Linda Little

2013-05-01T23:59:59.000Z

10

Conceptual design analyses for Hanford Site deployable remote spectroscopy systems  

Science Conference Proceedings (OSTI)

This document identifies potential remote, NIR spectroscopic waste surface moisture monitoring system design alternatives to be operated inside one of the Hanford Site, high level, nuclear waste storage tanks. Potential tank waste moisture data impacts from the remote NIR signal transfer through high humidity vapor space is evaluated.

Philipp, B.L.; Reich, F.R.

1994-09-01T23:59:59.000Z

11

Remote inspection system for hazardous sites  

SciTech Connect

Long term storage of special nuclear materials poses a number of problems. One of these is a need to inspect the items being stored from time to time. Yet the environment is hostile to man, with significant radiation exposure resulting from prolonged presence in the storage facility. This paper describes research to provide a remote inspection capability, which could lead to eliminating the need for humans to enter a nuclear storage facility. While there are many ways in which an RI system might be created, this paper describes the development of a prototype remote inspection system, which utilizes virtual reality technology along with robotics. The purpose of this system is to allow the operator to establish a safe and realistic telepresence in a remote environment. In addition, it was desired that the user interface for the system be as intuitive to use as possible, thus eliminating the need for extensive training. The goal of this system is to provide a robotic platform with two cameras, which are capable of providing accurate and reliable stereographic images of the remote environment. One application for the system is that it might be driven down the corridors of a nuclear storage facility and utilized to inspect the drums inside, all without the need for physical human presence. Thus, it is not a true virtual reality system providing simulated graphics, but rather an augmented reality system, which performs remote inspection of an existing, real environment.

Redd, J.; Borst, C.; Volz, R.A.; Everett, L.J. [Texas A and M Univ., College Station, TX (United States). Computer Science Dept.] [Texas A and M Univ., College Station, TX (United States). Computer Science Dept.

1999-04-01T23:59:59.000Z

12

Site Location of Development Act (Maine) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Location of Development Act (Maine) Location of Development Act (Maine) Site Location of Development Act (Maine) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Maine Program Type Siting and Permitting Provider Department of Environmental Protection The Site Location of Development Act regulates the locations chosen for

13

Remote Gas Well Monitoring Technology Applied to Marcellus Shale Site |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Remote Gas Well Monitoring Technology Applied to Marcellus Shale Remote Gas Well Monitoring Technology Applied to Marcellus Shale Site Remote Gas Well Monitoring Technology Applied to Marcellus Shale Site February 10, 2012 - 12:00pm Addthis Washington, DC - A technology to remotely monitor conditions at energy-rich Marcellus Shale gas wells to help insure compliance with environmental requirements has been developed through a research partnership funded by the U.S. Department of Energy (DOE). NETL-RUA researcher Dr. Michael McCawley hasdeveloped a technology to remotely monitor theenvironment around energy-rich Marcellus Shale gas wells. Photo courtesy of West Virginia University.The technology - which involves three wireless monitoring modules to measure volatile organic compounds, dust, light and sound - is currently being tested at a Marcellus

14

Siting Study for the Remote-Handled Low-Level Waste Disposal Project  

Science Conference Proceedings (OSTI)

The U.S. Department of Energy has identified a mission need for continued disposal capacity for remote-handled low-level waste (LLW) generated at the Idaho National Laboratory (INL). An alternatives analysis that was conducted to evaluate strategies to achieve this mission need identified two broad options for disposal of INL generated remote-handled LLW: (1) offsite disposal and (2) onsite disposal. The purpose of this study is to identify candidate sites or locations within INL boundaries for the alternative of an onsite remote handled LLW disposal facility and recommend the highest-ranked locations for consideration in the National Environmental Policy Act process. The study implements an evaluation based on consideration of five key elements: (1) regulations, (2) key assumptions, (3) conceptual design, (4) facility performance, and (5) previous INL siting study criteria, and uses a five-step process to identify, screen, evaluate, score, and rank 34 separate sites located across INL. The result of the evaluation is identification of two recommended alternative locations for siting an onsite remote-handled LLW disposal facility. The two alternative locations that best meet the evaluation criteria are (1) near the Advanced Test Reactor Complex and (2) west of the Idaho Comprehensive Environmental Response, Compensation, and Liability Act Disposal Facility.

Lisa Harvego; Joan Connolly; Lance Peterson; Brennon Orr; Bob Starr

2010-10-01T23:59:59.000Z

15

Apparatus for detecting a magnetic anomaly contiguous to remote location by squid gradiometer and magnetometer systems  

DOE Patents (OSTI)

A superconducting quantum interference device (SQUID) magnetic detection apparatus detects magnetic fields, signals, and anomalies at remote locations. Two remotely rotatable SQUID gradiometers may be housed in a cryogenic environment to search for and locate unambiguously magnetic anomalies. The SQUID magnetic detection apparatus can be used to determine the azimuth of a hydrofracture by first flooding the hydrofracture with a ferrofluid to create an artificial magnetic anomaly therein.

Overton, Jr., William C. (Los Alamos, NM); Steyert, Jr., William A. (Los Alamos, NM)

1984-01-01T23:59:59.000Z

16

Photovoltaic systems in remote locations: an experience summary  

Science Conference Proceedings (OSTI)

Since 1979, the NASA Lewis Research Center has been responsible for the design, installation and operational support of 58 photovoltaic systems located in 27 countries. Together these systems contain 77.1 kW of photovoltaic modules and provide power for a variety of loads ranging from single low-power street light systems to a utility type power system for a village of over 150 people. Systems installation, reliability, operation, maintenance and repair experience is given and major problems areas are listed. Experience indicates that photovoltaic system technology is a proven technology, but that developing countries need to better posture themselves to acquire and utilize the technology. Recommendations are given.

Ratajczak, A.F.

1985-01-01T23:59:59.000Z

17

EIS-0243: Nevada Test Site and Off-Site Locations in the State of Nevada |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3: Nevada Test Site and Off-Site Locations in the State of 3: Nevada Test Site and Off-Site Locations in the State of Nevada EIS-0243: Nevada Test Site and Off-Site Locations in the State of Nevada Summary This EIS evaluates the potential environmental impacts of the management of low-level waste (LLW) at all sites and continue, to the extent practicable, disposal of on- site LLW at the Idaho National Engineering and Environmental Laboratory (INEEL), the Los Alamos National Laboratory (LANL) in New Mexico, the Oak Ridge Reservation (ORR) in Tennessee, and the Savannah River Site (SRS) in South Carolina. Public Comment Opportunities None available at this time. Documents Available for Download November 3, 2003 EIS-0243-SA-02: Supplement Analysis Nevada Test Site and Off-Site Locations in the State of Nevada to Address

18

Remotely operated excavator needs assessment/site visit summary  

SciTech Connect

The Uranium in Soils Integrated Demonstration requested an assessment of soil excavation needs relative to soil remediation. The following list identifies the DOE sites assessed: Mound Laboratory, Paducah Gaseous Diffusion Plant, Portsmouth Gaseous Diffusion Plant, Nevada Test Site, Lawrence Livermore National Laboratory, Rocky Flats Plant, Los Alamos National Laboratory, Sandia National Laboratory, Idaho National Engineering Laboratory, Hanford Site, and Fernald Site. The reviewed sites fall into one or more of the following three categories: production, EPA National Priorities List, or CERCLA (superfund) designation. Only three of the sites appear to have the need for a remotely operated excavator rope. Hanford and Idaho Falls have areas of high-level radioactive contamination either buried or in/under buildings. The Fernald site has a need for remote operated equipment of different types. It is their feeling that remote equipment can be used to remove the health dangers to humans by removing them from the area. Most interviewees stated that characterization technologies needs are more immediate concern over excavation. In addition, the sites do not have similar geographic conditions which would aid in the development of a generic precision excavator. The sites visited were not ready to utilize or provide the required design information necessary to draft a performance specification. This creates a strong case against the development of one type of ROPE for use at these sites. Assuming soil characterization technology/methodology is improved sufficiently to allow accurate and real time field characterization then development of a precision excavator might be pursued based on FEMP needs, since the FEMP`s sole scope of work is remediation. The excavator could then be used/tested and then later modified for other sites as warranted.

Straub, J.; Haller, S.; Worsley, R. [Westinghouse Environmental Management Co. of Ohio, Cincinnati, OH (United States); King, M. [THETA Technology Inc. (United States)

1992-12-02T23:59:59.000Z

19

T-685: Cisco Warranty CD May Load Malware From a Remote Site...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

85: Cisco Warranty CD May Load Malware From a Remote Site T-685: Cisco Warranty CD May Load Malware From a Remote Site August 5, 2011 - 3:26pm Addthis PROBLEM: A vulnerability was...

20

T-568: Mozilla Firefox Bugs Let Remote Users Conduct Cross-Site...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

68: Mozilla Firefox Bugs Let Remote Users Conduct Cross-Site Request Forgery Attacks and Execute Arbitrary Code T-568: Mozilla Firefox Bugs Let Remote Users Conduct Cross-Site...

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

A Small Secure Transportable Autonomous Lead-Cooled Fast Reactor for Deployment at Remote Sites  

Science Conference Proceedings (OSTI)

This presentation discusses a small secure transportable autonomous lead-cooled fast reactor for deployment at remote sites.

Sienicki, J .J.; Smith, M.A.; Mosseytsev, A.V.; Yang, W.S.; Wade, D.C.

2004-10-06T23:59:59.000Z

22

Remote-site power generation opportunities for Alaska  

Science Conference Proceedings (OSTI)

The Energy and Environmental Research Center (EERC) has been working with the Federal Energy Technology Center in Morgantown, West Virginia, to assess options for small, low-cost, environmental acceptable power generation for application in remote areas of Alaska. The goal of this activity was to reduce the use of fuel in Alaskan villages by developing small, low-cost power generation applications. Because of the abundance of high-quality coal throughout Alaska, emphasis was placed on clean coal applications, but other energy sources, including geothermal, wind, hydro, and coalbed methane, were also considered. The use of indigenous energy sources would provide cheaper cleaner power, reduce the need for PCE (Power Cost Equalization program) subsidies, increase self-sufficiency, and retain hard currency in the state while at the same time creating jobs in the region. The introduction of economical, small power generation systems into Alaska by US equipment suppliers and technology developers aided by the EERC would create the opportunities for these companies to learn how to engineer, package, transport, finance, and operate small systems in remote locations. All of this experience would put the US developers and equipment supply companies in an excellent position to export similar types of small power systems to rural areas or developing countries. Thus activities in this task that relate to determining the generic suitability of these technologies for other countries can increase US competitiveness and help US companies sell these technologies in foreign countries, increasing the number of US jobs. The bulk of this report is contained in the two appendices: Small alternative power workshop, topical report and Global market assessment of coalbed methane, fluidized-bed combustion, and coal-fired diesel technologies in remote applications.

Jones, M.L.

1997-03-01T23:59:59.000Z

23

An Operational System for the Remote Location of Lightning Flashes Using a VLF Arrival Time Difference Technique  

Science Conference Proceedings (OSTI)

An operational system for the remote location of lightning flashes at ranges of thousands of kilometers is presented. The vertical electric fields of VLF radio atmospherics (sferics), together with time data, are observed at a network of just ...

Anthony C. L. Lee

1986-12-01T23:59:59.000Z

24

Abstract--Telerehabilitation is the provision of rehabilitation services at a distance, by a therapist at a remote location.  

E-Print Network (OSTI)

by therapists at a remote location. Telerehabilitation can be clinic- based or home-based (see Rosen [1) clinic is being coached by a therapist expert at a tertiary care (or university) setting. For home-based

New Jersey, University of Medicine and Dentistry of

25

uCom : spatial displays for visual awareness of remote locations  

E-Print Network (OSTI)

uCom enables remote users to be visually aware of each other using "spatial displays" - live views of a remote space assembled according to an estimate of the remote space's layout. The main elements of the system design ...

Araujo Santos, Ana Luisa de

2009-01-01T23:59:59.000Z

26

Apparatus and method for detecting a magnetic anomaly contiguous to remote location by SQUID gradiometer and magnetometer systems  

DOE Patents (OSTI)

A superconducting quantum interference device (SQUID) magnetic detection apparatus detects magnetic fields, signals, and anomalies at remote locations. Two remotely rotatable SQUID gradiometers may be housed in a cryogenic environment to search for and locate unambiguously magnetic anomalies. The SQUID magnetic detection apparatus can be used to determine the azimuth of a hydrofracture by first flooding the hydrofracture with a ferrofluid to create an artificial magnetic anomaly therein.

Overton, W.C. Jr.; Steyert, W.A. Jr.

1981-05-22T23:59:59.000Z

27

V-012: Mozilla Firefox 'window.location' Bugs Permit Cross-Site...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

IMPACT ASSESSMENT: High DISCUSSION: A remote user can exploit the valueOf() method of window.location to, in combination with some plugins, inject scripting code to cause...

28

U-217: Red Hat Certificate System Bugs Let Remote Users Conduct Cross-Site  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7: Red Hat Certificate System Bugs Let Remote Users Conduct 7: Red Hat Certificate System Bugs Let Remote Users Conduct Cross-Site Scripting and Denial of Service Attacks U-217: Red Hat Certificate System Bugs Let Remote Users Conduct Cross-Site Scripting and Denial of Service Attacks July 20, 2012 - 7:00am Addthis PROBLEM: Red Hat Certificate System Bugs Let Remote Users Conduct Cross-Site Scripting and Denial of Service Attacks PLATFORM: Red Hat Certificate System v8 ABSTRACT: Two vulnerabilities were reported in Red Hat Certificate System. A remote user can conduct cross-site scripting attacks. A remote authenticated user can revoke the CA certificate. reference LINKS: Advisory: RHSA-2012:1103-1 SecurityTracker Alert ID: 1027284 CVE-2012-2662 CVE-2012-3367 IMPACT ASSESSMENT: Medium Discussion: The Agent and End Entity pages do not properly filter HTML code from

29

U-265: HP SiteScope Bugs in SiteScope SOAP Feature Let Remote Users Obtain  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5: HP SiteScope Bugs in SiteScope SOAP Feature Let Remote Users 5: HP SiteScope Bugs in SiteScope SOAP Feature Let Remote Users Obtain Information and Execute Arbitrary Code U-265: HP SiteScope Bugs in SiteScope SOAP Feature Let Remote Users Obtain Information and Execute Arbitrary Code September 21, 2012 - 6:00am Addthis PROBLEM: HP SiteScope Bugs in SiteScope SOAP Feature Let Remote Users Obtain Information and Execute Arbitrary Code PLATFORM: HP SiteScope v11.10, v11.11, v11.12 for Windows, Linux and Solaris ABSTRACT: A vulnerability was reported in HP SiteScope. reference LINKS: HP Security Bulletin Document ID: c03489683 SecurityTracker Alert ID: 1027547 CVE-2012-3259 CVE-2012-3260 CVE-2012-3261 CVE-2012-3262 CVE-2012-3263 CVE-2012-3264 IMPACT ASSESSMENT: Medium Discussion: A vulnerability was reported in HP SiteScope. A remote user can execute

30

U-265: HP SiteScope Bugs in SiteScope SOAP Feature Let Remote Users Obtain  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5: HP SiteScope Bugs in SiteScope SOAP Feature Let Remote Users 5: HP SiteScope Bugs in SiteScope SOAP Feature Let Remote Users Obtain Information and Execute Arbitrary Code U-265: HP SiteScope Bugs in SiteScope SOAP Feature Let Remote Users Obtain Information and Execute Arbitrary Code September 21, 2012 - 6:00am Addthis PROBLEM: HP SiteScope Bugs in SiteScope SOAP Feature Let Remote Users Obtain Information and Execute Arbitrary Code PLATFORM: HP SiteScope v11.10, v11.11, v11.12 for Windows, Linux and Solaris ABSTRACT: A vulnerability was reported in HP SiteScope. reference LINKS: HP Security Bulletin Document ID: c03489683 SecurityTracker Alert ID: 1027547 CVE-2012-3259 CVE-2012-3260 CVE-2012-3261 CVE-2012-3262 CVE-2012-3263 CVE-2012-3264 IMPACT ASSESSMENT: Medium Discussion: A vulnerability was reported in HP SiteScope. A remote user can execute

31

Fuel Cell Demonstration Program - Central and Remote Sites 2003  

SciTech Connect

In an effort to promote clean energy projects and aid in the commercialization of new fuel cell technologies, the Long Island Power Authority (LIPA) initiated a Fuel Cell Demonstration Program in 1999 with six month deployments of Proton Exchange Membrane (PEM) non-commercial Beta model systems at partnering sites throughout Long Island. These projects facilitated significant developments in the technology, providing operating experience that allowed the manufacturer to produce fuel cells that were half the size of the Beta units and suitable for outdoor installations. In 2001, LIPA embarked on a large-scale effort to identify and develop measures that could improve the reliability and performance of future fuel cell technologies for electric utility applications and the concept to establish a fuel cell farm (Farm) of 75 units was developed. By the end of October of 2001, 75 Lorax 2.0 fuel cells had been installed at the West Babylon substation on Long Island, making it the first fuel cell demonstration of its kind and size anywhere in the world at the time. Designed to help LIPA study the feasibility of using fuel cells to operate in parallel with LIPA's electric grid system, the Farm operated 120 fuel cells over its lifetime of over 3 years including 3 generations of Plug Power fuel cells (Lorax 2.0, Lorax 3.0, Lorax 4.5). Of these 120 fuel cells, 25 Lorax 4.5 units operated under this Award from April 2003 to December 2004. In parallel with the operation of the Farm, LIPA recruited government, commercial, and residential customers to demonstrate fuel cells as on-site distributed generation. The deployment of the 20 Lorax 4.5 units for the Remote Sites phase of the project began in October 2004. To date, 10 fuel cells have completed their demonstrations while 10 fuel cells are currently being monitored at various customer sites throughout Long Island. As of June 30, 2006 the 45 fuel cells operating under this Award produced a total of 1,585,093 kWh. As fuel cell technology became more mature, performance improvements included increases in system efficiency and availability. Including equipment, design, fuel, maintenance, installation, and decommissioning the total project budget was approximately $3.7 million.

Gerald Brun

2006-09-15T23:59:59.000Z

32

Rank Sites by Building Type and Location for Greenhouse Gas Mitigation |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rank Sites by Building Type and Location for Greenhouse Gas Rank Sites by Building Type and Location for Greenhouse Gas Mitigation Rank Sites by Building Type and Location for Greenhouse Gas Mitigation October 7, 2013 - 10:57am Addthis YOU ARE HERE: Step 2 After establishing building locations for greenhouse gas (GHG) mitigation analysis, the next step is to rank sites using the additional factors of eGRID region and climate region. In the Table 1 example below, because Site C and Site D represent the same proportion of Program B's office space (22% each), evaluating eGRID region and climate region will help to prioritize which sites may have a greater potential for GHG reductions. Table 1. Example: Program B Office Location Evaluation Site Name Percent of total Program SF by building type (%) eGRID Climate Region eGRID-Climate Weight1 Location Rank

33

V-140: Apache ActiveMQ Bugs Let Remote Users Conduct Cross-Site Scripting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0: Apache ActiveMQ Bugs Let Remote Users Conduct Cross-Site 0: Apache ActiveMQ Bugs Let Remote Users Conduct Cross-Site Scripting Attacks, Deny Service, and Obtain Potentially Sensitive Information V-140: Apache ActiveMQ Bugs Let Remote Users Conduct Cross-Site Scripting Attacks, Deny Service, and Obtain Potentially Sensitive Information April 23, 2013 - 12:26am Addthis PROBLEM: Apache ActiveMQ Bugs Let Remote Users Conduct Cross-Site Scripting Attacks, Deny Service, and Obtain Potentially Sensitive Information PLATFORM: Apache ActiveMQ versions prior to 5.8.0 ABSTRACT: Several vulnerabilities were reported in Apache ActiveMQ. REFERENCE LINKS: Apache ActiveMQ SecurityTracker Alert ID: 1028457 CVE-2012-6092 CVE-2012-6551 CVE-2013-3060 IMPACT ASSESSMENT: High DISCUSSION: Several web demos do not properly filter HTML code from user-supplied input

34

V-140: Apache ActiveMQ Bugs Let Remote Users Conduct Cross-Site Scripting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0: Apache ActiveMQ Bugs Let Remote Users Conduct Cross-Site 0: Apache ActiveMQ Bugs Let Remote Users Conduct Cross-Site Scripting Attacks, Deny Service, and Obtain Potentially Sensitive Information V-140: Apache ActiveMQ Bugs Let Remote Users Conduct Cross-Site Scripting Attacks, Deny Service, and Obtain Potentially Sensitive Information April 23, 2013 - 12:26am Addthis PROBLEM: Apache ActiveMQ Bugs Let Remote Users Conduct Cross-Site Scripting Attacks, Deny Service, and Obtain Potentially Sensitive Information PLATFORM: Apache ActiveMQ versions prior to 5.8.0 ABSTRACT: Several vulnerabilities were reported in Apache ActiveMQ. REFERENCE LINKS: Apache ActiveMQ SecurityTracker Alert ID: 1028457 CVE-2012-6092 CVE-2012-6551 CVE-2013-3060 IMPACT ASSESSMENT: High DISCUSSION: Several web demos do not properly filter HTML code from user-supplied input

35

T-568: Mozilla Firefox Bugs Let Remote Users Conduct Cross-Site Request  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

68: Mozilla Firefox Bugs Let Remote Users Conduct Cross-Site 68: Mozilla Firefox Bugs Let Remote Users Conduct Cross-Site Request Forgery Attacks and Execute Arbitrary Code T-568: Mozilla Firefox Bugs Let Remote Users Conduct Cross-Site Request Forgery Attacks and Execute Arbitrary Code March 2, 2011 - 3:05pm Addthis PROBLEM: Mozilla Firefox Bugs Let Remote Users Conduct Cross-Site Request Forgery Attacks and Execute Arbitrary Code. PLATFORM: Firefox, Thunderbird, SeaMonkey ABSTRACT: Mozilla developers identified and fixed several memory safety bugs in the browser engine used in Firefox and other Mozilla-based products. Some of these bugs showed evidence of memory corruption under certain circumstances, and Mozilla presume that with enough effort at least some of these could be exploited to run arbitrary code. reference LINKS:

36

Measurement Sites in Google Earth These files contain measurement site locations for various atmospheric monitoring networks and NARSTO Projects in  

E-Print Network (OSTI)

Measurement Sites in Google Earth These files contain measurement site locations for various atmospheric monitoring networks and NARSTO Projects in Google Earth coverages with links to additional site TN Ozone Study) q MILAGRO Sites q TEXAQS2000 TNRCC CAMS Obtain Google Earth Files The Google Earth

37

IpNose: Electronic nose for remote bad odour monitoring system in landfill sites Alex Perera*  

E-Print Network (OSTI)

IpNose: Electronic nose for remote bad odour monitoring system in landfill sites Alex Perera to classify and quantify different gas/odours. Here we suggest the integration of a small form factor computer of bad odours in landfill sites. Preliminary approach to this application using commercial sensors

Gutierrez-Osuna, Ricardo

38

Evaluation of Location Tracking Systems for Remote Monitoring of Radiation Protection Applications  

Science Conference Proceedings (OSTI)

This report describes the commercially available location and tracking systems that are applicable to nuclear power plant use. These systems were investigated for applicability and functional use within the power plant environment for tracking and locating personnel and assets. The actual location and tracking system chosen for use in a nuclear power facility depends on the specific application and the system characteristics required.

2010-09-28T23:59:59.000Z

39

Replacement Capability for Disposal of Remote-Handled Low-Level Waste Generated at the Department of Energys Idaho Site  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Environmental Assessment Environmental Assessment for the Replacement Capability for Disposal of Remote-Handled Low-Level Radioactive Waste Generated at the Department of Energy's Idaho Site August 2011 DOE/EA-1793 Draft Environmental Assessment for the Replacement Capability for Disposal of Remote-Handled Low-Level Radioactive Waste Generated at the Department of Energy's Idaho Site August 2011 v EXECUTIVE SUMMARY The U.S. Department of Energy (DOE) proposes to provide replacement capability for disposal of remote-handled low-level radioactive waste (LLW) generated at the Idaho National Laboratory (INL) site beginning in October 2017. Historically, INL has disposed of this LLW onsite. However, the existing disposal area located within the INL Radioactive Waste Management Complex will undergo

40

Vegetation Cover Analysis of Hazardous Waste Sites in Utah and Arizona Using Hyperspectral Remote Sensing  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Remote Sens. 2012, 4, 327-353; doi:10.3390/rs4020327 Remote Sens. 2012, 4, 327-353; doi:10.3390/rs4020327 Remote Sensing ISSN 2072-4292 www.mdpi.com/journal/remotesensing Article Vegetation Cover Analysis of Hazardous Waste Sites in Utah and Arizona Using Hyperspectral Remote Sensing Jungho Im 1, *, John R. Jensen 2 , Ryan R. Jensen 3 , John Gladden 4 , Jody Waugh 5 and Mike Serrato 4 1 Department of Environmental Resources Engineering, College of Environmental Science and Forestry, State University of New York, Syracuse, NY 13210, USA 2 Department of Geography, University of South Carolina, Columbia, SC 29208, USA; E-Mail: johnj@mailbox.sc.edu 3 Department of Geography, Brigham Young University, Provo, UT 84605, USA; E-Mail: ryan.jensen@byu.edu 4 Savannah River National Laboratory, Department of Energy, Aiken, SC 29808, USA;

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Comparison of costs for solar electric sources with diesel generators in remote locations  

E-Print Network (OSTI)

-6900, Kingdom of Saudi Arabia. E-mail: robock@envsci.rutgers.edu Published by AAAS onJanuary30,2010www cannot be confined to one location. Furthermore, weather and climate variability preclude observation production on a large scale. We use the term "geoengineering" to refer to solar radiation management (SRM

Paris-Sud XI, Université de

42

Water Quality Sampling Locations Along the Shoreline of the Columbia River, Hanford Site, Washington  

Science Conference Proceedings (OSTI)

As environmental monitoring evolved on the Hanford Site, several different conventions were used to name or describe location information for various sampling sites along the Hanford Reach of the Columbia River. These methods range from handwritten descriptions in field notebooks to the use of modern electronic surveying equipment, such as Global Positioning System receivers. These diverse methods resulted in inconsistent archiving of analytical results in various electronic databases and published reports because of multiple names being used for the same site and inaccurate position data. This document provides listings of sampling sites that are associated with groundwater and river water sampling. The report identifies names and locations for sites associated with sampling: (a) near-river groundwater using aquifer sampling tubes; (b) riverbank springs and springs areas; (c) pore water collected from riverbed sediment; and (d) Columbia River water. Included in the listings are historical names used for a particular site and the best available geographic coordinates for the site, as of 2009. In an effort to create more consistency in the descriptive names used for water quality sampling sites, a naming convention is proposed in this document. The convention assumes that a unique identifier is assigned to each site that is monitored and that this identifier serves electronic database management requirements. The descriptive name is assigned for the convenience of the subsequent data user. As the historical database is used more intensively, this document may be revised as a consequence of discovering potential errors and also because of a need to gain consensus on the proposed naming convention for some water quality monitoring sites.

Peterson, Robert E.; Patton, Gregory W.

2009-12-14T23:59:59.000Z

43

Remote Assessment of Army Tactictal River Crossing Sites Using LIDAR Imagery  

E-Print Network (OSTI)

Approved for public release; distribution is unlimited. Prepared for Tactical river crossings present impediments to Army units on the move because they require specialized procedures and equipment as well as more detailed planning and control than normal operations. A crossing sites suitability is highly dependant on riverbank geography. Commanders with accurate riverbank data can increase the speed of crossing operations, both by quickly and accurately determining appropriate sites and by minimizing the amount and type of equipment carried forward to effect the crossings. A previous study examined how conventional terrain analysis would be used to determine suitable crossing sites. In that study, there was a 16 % acceptable site selection rate for remotely determined crossing sites. The most common problem, which was not detectable using conventional techniques, was that bank slope was too steep for vehicles to traverse. This study looks at using a Light Distance and Ranging (LIDAR) digital elevation model (DEM) to improve acceptable site selection rate. LIDAR data were collected at the sites identified in the previous study and inspected to see if the DEM would provide the information and resolution necessary to improve crossing site identification. The DEM was compared to

Barry A. Coutermarsh July; Barry A. Coutermarsh

2003-01-01T23:59:59.000Z

44

Capacitated location of collection sites in an urban waste management system  

SciTech Connect

Urban waste management is becoming an increasingly complex task, absorbing a huge amount of resources, and having a major environmental impact. The design of a waste management system consists in various activities, and one of these is related to the location of waste collection sites. In this paper, we propose an integer programming model that helps decision makers in choosing the sites where to locate the unsorted waste collection bins in a residential town, as well as the capacities of the bins to be located at each collection site. This model helps in assessing tactical decisions through constraints that force each collection area to be capacitated enough to fit the expected waste to be directed to that area, while taking into account Quality of Service constraints from the citizens' point of view. Moreover, we propose an effective constructive heuristic approach whose aim is to provide a good solution quality in an extremely reduced computational time. Computational results on data related to the city of Nardo, in the south of Italy, show that both exact and heuristic approaches provide consistently better solutions than that currently implemented, resulting in a lower number of activated collection sites, and a lower number of bins to be used.

Ghiani, Gianpaolo, E-mail: gianpaolo.ghiani@unisalento.it [Dipartimento di Ingegneria dell'Innovazione, Universita del Salento, via per Monteroni, 73100 Lecce (Italy); Itaca S.r.l., via P. Bucci 41C, 87036 Rende (Italy); Lagana, Demetrio, E-mail: dlagana@deis.unical.it [Dipartimento di Elettronica, Informatica e Sistemistica, Universita della Calabria, via P. Bucci 41C, 87036 Rende (Italy); Manni, Emanuele, E-mail: emanuele.manni@unisalento.it [Dipartimento di Ingegneria dell'Innovazione, Universita del Salento, via per Monteroni, 73100 Lecce (Italy); Itaca S.r.l., via P. Bucci 41C, 87036 Rende (Italy); Triki, Chefi, E-mail: chefi.triki@unisalento.it [Dipartimento di Matematica, Universita del Salento, via per Monteroni, 73100 Lecce (Italy); Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat (Oman)

2012-07-15T23:59:59.000Z

45

Effects of Remote Generation Sites on Model Estimates of M2 Internal Tides in the Philippine Sea  

Science Conference Proceedings (OSTI)

This study investigates the impact of remotely generated internal tides on model estimates of barotropic to baroclinic tidal conversion for two generation sites bounding the Philippine Sea: the Luzon Strait and the Mariana Island Arc. A primitive ...

Colette G. Kerry; Brian S. Powell; Glenn S. Carter

2013-01-01T23:59:59.000Z

46

Transportation and Site Location Analysis for Regional Integrated Biomass Assessment (RIBA)  

DOE Green Energy (OSTI)

The farmgate cost and available supply of biomass often exhibit considerable variation within a State. This variation, combined with the relatively high cost of transporting bulky biomass material, produces a wide range of expected delivered feedstock costs across a State. As a consequence, both production and transportation costs must be well-modeled when analyzing potential locations for conversion facilities. The Regional Integrated Biomass Assessment system consists of two phases. The descriptive phase characterizes a farmgate cost and supply surface for switchgrass production over a given State. These results are passed to the analytical phase, where a transportation model is used to compute the marginal cost of supplying an ethanol plant at a prescribed level of demand. The model generates a marginal cost surface that illustrates the most promising areas for locating an ethanol plant. Next, a sequential location model simulates the commercial development of ethanol production facilities. This model considers every road network node as a potential site and generates a sequence of likely plant locations. Results from the RIBA analysis demonstrate that the cost of switchgrass can increase dramatically from one location to another. This variation will seriously effect the economics of conversion in the proper sizing and locating of ethanol plant facilities.

Noon, C.E.; Daly, M.J.; Graham, R.L.; Zahn, F.B.

1996-09-15T23:59:59.000Z

47

VEGETATION COVER ANALYSIS OF HAZARDOUS WASTE SITES IN UTAH AND ARIZONA USING HYPERSPECTRAL REMOTE SENSING  

Science Conference Proceedings (OSTI)

Remote sensing technology can provide a cost-effective tool for monitoring hazardous waste sites. This study investigated the usability of HyMap airborne hyperspectral remote sensing data (126 bands at 2.3 x 2.3 m spatial resolution) to characterize the vegetation at U.S. Department of Energy uranium processing sites near Monticello, Utah and Monument Valley, Arizona. Grass and shrub species were mixed on an engineered disposal cell cover at the Monticello site while shrub species were dominant in the phytoremediation plantings at the Monument Valley site. The specific objectives of this study were to: (1) estimate leaf-area-index (LAI) of the vegetation using three different methods (i.e., vegetation indices, red-edge positioning (REP), and machine learning regression trees), and (2) map the vegetation cover using machine learning decision trees based on either the scaled reflectance data or mixture tuned matched filtering (MTMF)-derived metrics and vegetation indices. Regression trees resulted in the best calibration performance of LAI estimation (R{sup 2} > 0.80). The use of REPs failed to accurately predict LAI (R{sup 2} < 0.2). The use of the MTMF-derived metrics (matched filter scores and infeasibility) and a range of vegetation indices in decision trees improved the vegetation mapping when compared to the decision tree classification using just the scaled reflectance. Results suggest that hyperspectral imagery are useful for characterizing biophysical characteristics (LAI) and vegetation cover on capped hazardous waste sites. However, it is believed that the vegetation mapping would benefit from the use of 1 higher spatial resolution hyperspectral data due to the small size of many of the vegetation patches (< 1m) found on the sites.

Serrato, M.; Jungho, I.; Jensen, J.; Jensen, R.; Gladden, J.; Waugh, J.

2012-01-17T23:59:59.000Z

48

Evaluation of CLM4 Solar Radiation Partitioning Scheme Using Remote Sensing and Site Level FPAR Datasets  

E-Print Network (OSTI)

Abstract: This paper examines a land surface solar radiation partitioning scheme, i.e., that of the Community Land Model version 4 (CLM4) with coupled carbon and nitrogen cycles. Taking advantage of a unique 30-year fraction of absorbed photosynthetically active radiation (FPAR) dataset, derived from the Global Inventory Modeling and Mapping Studies (GIMMS) normalized difference vegetation index (NDVI) data set, multiple other remote sensing datasets, and site level observations, we evaluated the CLM4 FPARs seasonal cycle, diurnal cycle, long-term trends, and spatial patterns. Our findings show that the model generally agrees with observations in the seasonal cycle, long-term trends, and spatial patterns, but does not reproduce the diurnal cycle. Discrepancies also exist in seasonality magnitudes, peak value months, and spatial heterogeneity. We identify the discrepancy in the diurnal cycle as, due to, the absence of dependence on sun angle in the model. Implementation of sun angle dependence in a one-dimensional (1-D) model is proposed. The need for better relating of vegetation to climate in the model, indicated by long-term trends, is also noted. Evaluation of the CLM4 land surface solar radiation partitioning scheme using remote sensing and site level FPAR datasets provides targets for

Kai Wang; Jiafu Mao; Robert E. Dickinson; Xiaoying Shi; Wilfred M. Post; Zaichun Zhu; Ranga B. Myneni

2013-01-01T23:59:59.000Z

49

Iodine-129 in forage and deer on the Hanford site and other Pacific Northwest locations  

SciTech Connect

Samples of surface soil, litter, forage, and deer (rumen content, muscle, liver, and thyroid gland) were collected from Bend, Oregon; Centralia, Washington; Wenatchee, Washington; the Wooten Game Range near Dayton, Washington; and on or near the Hanford Site, Richland, Washington. The concentrations of /sup 129/I and /sup 127/I were determined using neturon activation techniques. The purpose of the study was to establish the current levels of /sup 129/I in the environs of the Hanford Site prior to the proposed restart of fuel reprocessing at the PUREX plant. The results of this study clearly demonstrated the longevity of /sup 129/I in the biosphere following gaseous release from a nuclear facility. Analyses of thyroid glands showed that deer living within 160 km (Wooten Game Range) of Hanford had elevated levels of /sup 129/I when compared to the more distant Pacific Northwest locations (Centralia, or Bend). Levels of /sup 129/I in deer thyroid from Bend, or Centralia, (15 fCi/g wet weight), were about five times higher than values reported for the central United States, while, Hanford samples were about 2,700 times higher. The average concentration of /sup 129/I in deer thyroids collected at Hanford in 1978 was similar to samples collected 14 years earlier. The concentrations of /sup 129/I in soil, litter, forage, and other deer samples generally decrease in the order: Hanford > Wooten > Wenatchee > Centralia approx. = Bend. This corresponds to an increase in distance from the Hanford Site.

Price, K.R.; Cadwell, L.L.; Schreckhise, R.G.; Brauer, F.P.

1981-02-01T23:59:59.000Z

50

DEVELOPMENT OF REMOTE HANFORD CONNECTOR GASKET REPLACEMENT TOOLING FOR THE SAVANNAH RIVER SITE'S DEFENSE WASTE PROCESSING FACILITY  

Science Conference Proceedings (OSTI)

The Savannah River Site's (SRS) Defense Waste Processing Facility (DWPF) requested development of tooling for remote replacement of gaskets in mechanical Hanford connectors. The facility has compressed air supply, two master-slave manipulators (MSM's) and a lightweight robotic arm for operation of the remote tools. The Savannah River National Laboratory (SRNL) developed and tested multiple tools to perform the gasket replacement tasks. Separate pneumatic snap-ring removal tools that use the connector skirt as a reaction surface were developed for removal of the snap ring and spent gasket on both vertical and horizontal Hanford connectors. A pneumatic tool that clamps and centers on the jumper pipe ID was developed to simultaneously install the new gasket and snap ring. A pneumatic snap-ring-loading tool was developed that compresses the snap ring and places it in a groove in the installation tool. All of the tools are located on a custom work table with a pneumatic valve station that directs compressed air to the desired tool and vents the tools as needed. The entire system has been successfully tested using MSM's to manipulate the various tools. Deployment of the entire system is expected during FY08. The Hanford connector gasket replacement tooling has been successfully tested using MSM's to manipulate the various tools. Nitric acid is used in many of the decontamination processes performed in the REDC, where the tooling will be deployed. Although most of the tool components were fabricated/purchased with nitric acid and radioactive service in mind, some of the prototype parts must be replaced with parts that are more compatible with nitric acid/radioactive service. Several modifications to the various tools are needed to facilitate maintenance and replacement of failed components. Development of installation tools for replacement of 1-inch, 2-inch and multi-hole gaskets is being considered. Deployment of the existing system in the DWPF REDC is expected during FY08.

Krementz, D

2007-11-27T23:59:59.000Z

51

Seismic Characterization of Basalt Topography at Two Candidate Sites for the INL Remote-Handled Low-Level Waste Disposal Project  

Science Conference Proceedings (OSTI)

This report presents the seismic refraction results from the depth to bed rock surveys for two areas being considered for the Remote-Handled Low-Level Waste (RH-LLW) disposal facility at the Idaho National Laboratory. The first area (Site 5) surveyed is located southwest of the Advanced Test Reactor Complex and the second (Site 34) is located west of Lincoln Boulevard near the southwest corner of the Idaho Nuclear Technology and Engineering Center (INTEC). At Site 5, large area and smaller-scale detailed surveys were performed. At Site 34, a large area survey was performed. The purpose of the surveys was to define the topography of the interface between the surficial alluvium and underlying basalt. Seismic data were first collected and processed using seismic refraction tomographic inversion. Three-dimensional images for both sites were rendered from the data to image the depth and velocities of the subsurface layers. Based on the interpreted top of basalt data at Site 5, a more detailed survey was conducted to refine depth to basalt. This report briefly covers relevant issues in the collection, processing and inversion of the seismic refraction data and in the imaging process. Included are the parameters for inversion and result rendering and visualization such as the inclusion of physical features. Results from the processing effort presented in this report include fence diagrams of the earth model, for the large area surveys and iso-velocity surfaces and cross sections from the detailed survey.

Jeff Sondrup; Gail Heath; Trent Armstrong; Annette Shafer; Jesse Bennett; Clark Scott

2011-04-01T23:59:59.000Z

52

Remotely Controlled, Continuous Observations of Infrared Radiance with the CSIRO/ARM Mark II Radiometer at the SGP CART Site  

NLE Websites -- All DOE Office Websites (Extended Search)

Remotely Controlled, Continuous Observations of Remotely Controlled, Continuous Observations of Infrared Radiance with the CSIRO/ARM Mark II Radiometer at the SGP CART Site C. M. R. Platt and R. T. Austin Department of Atmospheric Science Colorado State University Fort Collins, Colorado C. M. R. Platt and J. A. Bennett Commonwealth Scientific and Industrial Research Organization Atmospheric Research Aspendale, Victoria, Australia Abstract The Commonwealth Scientific and Industrial Research Organization/Atmospheric Radiation Measurement (CSIRO/ARM) Program Mark II infrared (IR) filter radiometer operated continuously at the Southern Great Plains (SGP) Cloud and Radiation Testbed (CART) site for a period of five weeks. Data of high quality were obtained by remote operation and data transfer with no evidence of spurious

53

Multiple Remote Sensor Observations of Supercooled Liquid Water in a Winter Storm at Beaver, Utah  

Science Conference Proceedings (OSTI)

The temporal and spatial distribution of cloud liquid water in a winter storm from the 1983 Utah/NOAA Cooperative Weather Modification Program is characterized using remote sensing observations. The remote sensors, located at a mountain-base site ...

Kenneth Sassen; Robert M. Rauber; J. B. Snider

1986-06-01T23:59:59.000Z

54

Remote Sensing Applications for Sustainable Aquaculture in Africa  

E-Print Network (OSTI)

Remote Sensing Applications for Sustainable Aquaculture in Africa Joseph E. Quansah1 , Gilbert L of the science with respect to remote sensing applications for aquaculture, including site location, aquaculture for multi-sensor remote sensing deployment to support sustainable fish production in these environments

Jiang, Wen

55

Remote sensing for site-specific management of biotic and abiotic stress in cotton  

E-Print Network (OSTI)

This study evaluated the applicability of remote sensing instrumentation for site- specific management of abiotic and biotic stress on cotton grown under a center pivot. Three different irrigation regimes (100%, 75%, and 50% ETc) were imposed on a cotton field to 1) monitor canopy temperatures of cotton with infrared thermometers (IRTs) in order to pinpoint areas of biotic and abiotic stress, 2) compare aerial infrared photography to IRTs mounted on center pivots to correlate areas of biotic and abiotic stress, and 3) relate yield to canopy temperatures. Pivot-mounted IRTs and IR camera were able to differentiate water stress between the irrigation regimes, however, only the IR camera was effectively able to distinguish between biotic (cotton root rot) and abiotic (drought) stress with the assistance of groundtruthing. The 50% ETc regime had significantly higher canopy temperatures, which were reflected in significantly lower lint yields when compared to the 75% and 100% ETc regimes. Deficit irrigation up to 75% ETc had no impact on yield, indicating that water savings were possible without yield depletion.

Falkenberg, Nyland Ray

2005-05-01T23:59:59.000Z

56

Analysis Of Microseismic Location Accuracy For Hydraulic Fracturing At The DWTI Site, Jasper, Texas  

E-Print Network (OSTI)

This report presents the results of a feasibility study designed to assess whether microseismic location techniques can provide enough accuracy and precision to enable a

Rieven, Shirley

1995-01-01T23:59:59.000Z

57

Imaging Hydraulic Fractures: Source Location Uncertainty Analysis At The UPRC Carthage Test Site  

E-Print Network (OSTI)

Hydraulic fracturing is a useful tool for enhancing gas and oil production. High-resolution seismic imaging of the fracture geometry and fracture growth process is the key in determining optimal spacing and location of ...

Li, Yingping

1996-01-01T23:59:59.000Z

58

Site Errors and Detection Efficiency in a Magnetic Direction-Finder Network for Locating Lightning Strikes to Ground  

Science Conference Proceedings (OSTI)

We have tested a network of magnetic direction-finders (DFs) that locate ground strikes in Oklahoma and surrounding states in order to determine detection efficiency for the network and systematic errors in azimuth (i.e., site errors) for each of ...

Douglas M. Mach; Donald R. MacGorman; W. David Rust; Roy T. Arnold

1986-03-01T23:59:59.000Z

59

Location analysis and strontium-90 concentrations in deer antlers on the Hanford Site  

SciTech Connect

The primary objective of this study was to examine the levels of strontium-90 ({sup 90}Sr) in deer antlers collected from near previously active reactor sites and distant from the reactor sites along that portion of the Columbia River which borders the Hanford Site. A second objective was to analyze the movements and home-ranges of mule deer residing within these areas and determine to what extent this information contributes to the observed {sup 90}Sr concentrations. {sup 90}Sr is a long-lived radionuclide (29.1 year half life) produced by fission in irradiated fuel in plutonium production reactors on the Hanford Site. It is also a major component of atmospheric fallout from weapons testing. Concentrations of radionuclides found in the developed environment onsite do not pose a health concern to humans or various wildlife routinely monitored. However, elevated levels of radionuclides in found biota may indicate routes of exposure requiring attention.

Tiller, B L; Eberhardt, L E; Poston, T M

1995-05-01T23:59:59.000Z

60

Tables of co-located geothermal-resource sites and BLM Wilderness Study Areas  

DOE Green Energy (OSTI)

Matched pairs of known geothermal wells and springs with BLM proposed Wilderness Study Areas (WSAs) were identified by inspection of WSA and Geothermal resource maps for the states of Arizona, California, Colorado, Idaho, Montana, Nevada, New Mexico, Oregon, Utah, Washington and Wyoming. A total of 3952 matches, for geothermal sites within 25 miles of a WSA, were identified. Of these, only 71 (1.8%) of the geothermal sites are within one mile of a WSA, and only an additional 100 (2.5%) are within one to three miles. Approximately three-fourths of the matches are at distances greater than ten miles. Only 12 of the geothermal sites within one mile of a WSA have surface temperatures reported above 50/sup 0/C. It thus appears that the geothermal potential of WSAs overall is minimal, but that evaluation of geothermal resources should be considered in more detail for some areas prior to their designation as Wilderness.

Foley, D.; Dorscher, M.

1982-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Simple economic evaluation and applications experiments for photovoltaic systems for remote sites  

DOE Green Energy (OSTI)

A simple evaluation of the cost effectiveness of photovoltaic systems is presented. The evaluation is based on a calculation of breakeven costs of photovoltaics (PV) arrays with the levelized costs of two alternative energy sources (1) extension of the utility grid and (2) diesel generators. A selected number of PV applications experiments that are in progress in remote areas of the US are summarized. These applications experiments range from a 23 watt insect survey trap to a 100 kW PV system for a national park complex. It is concluded that PV systems for remote areas are now cost effective in remote small applications with commercially available technology and will be cost competitive for intermediate scale systems (approx. 10 kW) in the 1980s if the DOE 1986 Commercial Readiness Goals are achieved.

Rios, M. Jr.

1980-01-01T23:59:59.000Z

62

Performance of a Remotely Located Muon Radiography System to Identify the Inner Structure of a Nuclear Plant  

E-Print Network (OSTI)

The performance of a muon radiography system designed to image the inner structure of a nuclear plant located at a distance of 64 m was evaluated. We concluded absence of the fuel in the pressure vessel during the measurement period and succeeded in profiling the fuel material placed in the storage pool. The obtained data also demonstrated the sensitivity of the system to water level changes in the reactor well and the dryer-separator pool. It is expected that the system could reconstruct a 2 m cubic fuel object easily. By operating multiple systems, typically four identical systems, viewing the reactor from different directions simultaneously, detection of a 1 m cubic object should also be achievable within a few month period.

Fujii, H; Hashimoto, S; Ito, F; Kakuno, H; Kim, S H; Kochiyama, M; Nagamine, K; Suzuki, A; Takada, Y; Takahashi, Y; Takasaki, F; Yamashita, S

2013-01-01T23:59:59.000Z

63

Performance of a Remotely Located Muon Radiography System to Identify the Inner Structure of a Nuclear Plant  

E-Print Network (OSTI)

The performance of a muon radiography system designed to image the inner structure of a nuclear plant located at a distance of 64 m was evaluated. We concluded absence of the fuel in the pressure vessel during the measurement period and succeeded in profiling the fuel material placed in the storage pool. The obtained data also demonstrated the sensitivity of the system to water level changes in the reactor well and the dryer-separator pool. It is expected that the system could reconstruct a 2 m cubic fuel object easily. By operating multiple systems, typically four identical systems, viewing the reactor from different directions simultaneously, detection of a 1 m cubic object should also be achievable within a few month period.

H. Fujii; K. Hara; S. Hashimoto; F. Ito; H. Kakuno; S. H. Kim; M. Kochiyama; K. Nagamine; A. Suzuki; Y. Takada; Y. Takahashi; F. Takasaki; S. Yamashita

2013-05-15T23:59:59.000Z

64

An Experiment to Locate the Site of TeV Flaring in M87  

SciTech Connect

We describe a Chandra X-ray target-of-opportunity project designed to isolate the site of TeV flaring in the radio galaxy M87. To date, we have triggered the Chandra observations only once (2010 April) and by the time of the first of our nine observations, the TeV flare had ended. However, we found that the X-ray intensity of the unresolved nucleus was at an elevated level for our first observation. Of the more than 60 Chandra observations we have made of the M87 jet covering nine years, the nucleus was measured at a comparably high level only three times. Two of these occasions can be associated with TeV flaring, and at the time of the third event, there were no TeV monitoring activities. From the rapidity of the intensity drop of the nucleus, we infer that the size of the emitting region is of order a few light days x the unknown beaming factor; comparable to the same sort of estimate for the TeV emitting region. We also find evidence of spectral evolution in the X-ray band which seems consistent with radiative losses affecting the non-thermal population of the emitting electrons within the unresolved nucleus.

Harris, D.E.; /Harvard-Smithsonian Ctr. Astrophys.; Massaro, F.; /Harvard-Smithsonian Ctr. Astrophys. /KIPAC, Menlo Park /SLAC; Cheung, C.C.; /Natl. Acad. Sci. /Naval Research Lab, Wash., D.C.; Horns, D.; Raue, M.; /Hamburg U.; Stawarz, L.; /JAXA, Sagamihara /Jagiellonian U., Astron. Observ.; Wagner, S.; /Heidelberg Observ.; Colin, P.; /Munich, Max Planck Inst.; Mazin, D.; /Barcelona, IFAE; Wagner, R.; /Munich, Max Planck Inst.; Beilicke, M.; /McDonnell Ctr. Space Sci.; LeBohec, S.; Hui, M.; /Utah U.; Mukherjee, R.; /Barnard Coll.

2012-05-18T23:59:59.000Z

65

Engineering study of 50 miscellaneous inactive underground radioactive waste tanks located at the Hanford Site, Washington  

SciTech Connect

This engineering study addresses 50 inactive underground radioactive waste tanks. The tanks were formerly used for the following functions associated with plutonium and uranium separations and waste management activities in the 200 East and 200 West Areas of the Hanford Site: settling solids prior to disposal of supernatant in cribs and a reverse well; neutralizing acidic process wastes prior to crib disposal; receipt and processing of single-shell tank (SST) waste for uranium recovery operations; catch tanks to collect water that intruded into diversion boxes and transfer pipeline encasements and any leakage that occurred during waste transfer operations; and waste handling and process experimentation. Most of these tanks have not been in use for many years. Several projects have, been planned and implemented since the 1970`s and through 1985 to remove waste and interim isolate or interim stabilize many of the tanks. Some tanks have been filled with grout within the past several years. Responsibility for final closure and/or remediation of these tanks is currently assigned to several programs including Tank Waste Remediation Systems (TWRS), Environmental Restoration and Remedial Action (ERRA), and Decommissioning and Resource Conservation and Recovery Act (RCRA) Closure (D&RCP). Some are under facility landlord responsibility for maintenance and surveillance (i.e. Plutonium Uranium Extraction [PUREX]). However, most of the tanks are not currently included in any active monitoring or surveillance program.

Freeman-Pollard, J.R.

1994-03-02T23:59:59.000Z

66

Remote Sensing and Geospatial Technological Applications for Site-specific Management of Fruit and Nut Crops: A Review  

E-Print Network (OSTI)

Abstract: Site-specific crop management (SSCM) is one facet of precision agriculture which is helping increase production with minimal input. It has enhanced the cost-benefit scenario in crop production. Even though the SSCM is very widely used in row crop agriculture like corn, wheat, rice, soybean, etc. it has very little application in cash crops like fruit and nut. The main goal of this review paper was to conduct a comprehensive review of advanced technologies, including geospatial technologies, used in site-specific management of fruit and nut crops. The review explores various remote sensing data from different platforms like satellite, LIDAR, aerial, and field imaging. The study analyzes the use of satellite sensors, such as Quickbird, Landsat, SPOT, and IRS imagery as well as hyperspectral narrow-band remote sensing data in study of fruit and nut crops in blueberry, citrus, peach, apple, etc. The study also explores other geospatial technologies such as GPS, GIS spatial modeling, advanced image processing techniques, and information technology for suitability study, orchard delineation, and classification accuracy assessment. The study also provides an example of a geospatial model developed in ArcGIS ModelBuilder to automate the blueberry production suitability analysis. The GIS

Sudhanshu Sekhar P; Gerrit Hoogenboom; Joel O. Paz

2010-01-01T23:59:59.000Z

67

Geopressured geothermal fairway evaluation and test-well site location, Frio Formation, Texas Gulf Coast  

DOE Green Energy (OSTI)

Tertiary strata of the Texas Gulf Coast comprise a number of terrigenous depositional wedges, some of which thicken abruptly at their downdip ends as a result of contemporaneous movement of growth faults and underlying salt. The Frio Formation, one of these wedges, has been studied regionally by means of a grid of correlation cross sections aided by micropaleontological control. By means of these sections, the Frio was subdivided into six map units; maps of sandstone distribution within these units delineate principal elongate sandstone trends parallel to the Gulf Coast composed of deltaic, barrier-bar, and strandplain sandstones. These broad regional studies, followed by detailed local investigations, were pursued in order to delineate prospective areas for production of geopressured geothermal energy. A prospective area must meet the following minimum requirements; reservoir volume of 3 cubic miles, minimum permeability of 20 millidarcys (md), and fluid temperatures of 300/sup 0/F. Several geothermal fairways were identified as a result of this Frio study. In summary, detailed geological, geophysical, and engineering studies conducted on the Frio Formation have delineated a geothermal test well site in the Austin Bayou Prospect which extends over an area of 60 square miles. A total of 800 to 900 feet of sandstone will occur between the depths of 13,500 and 16,500 feet. At least 30% of the sand will have core permeabilities of 20 to 60 millidarcys. Temperature at the top of the sandstone section will be 300/sup 0/F. Water, produced at a rate of 20,000 to 40,000 barrels per day, will probably have to be disposed of by injection into shallower sandstone reservoirs. More than 10 billion barrels of water are in place in these sandstone reservoirs of the Austin Bayou Prospect; there should be approximately 400 billion cubic feed of methane in solution in this water.

Bebout, D.G.; Loucks, R.G.; Gregory, A.R.

1978-01-01T23:59:59.000Z

68

REMOTE IN-CELL SAMPLING IMPROVEMENTS PROGRAM AT THESAVANNAH RIVER SITE (SRS) DEFENSE WASTE PROCESSING FACILITY (DWPF)  

Science Conference Proceedings (OSTI)

Remote Systems Engineering (RSE) of the Savannah River National Lab (SRNL) in combination with the Defense Waste Processing Facility(DWPF) Engineering and Operations has evaluated the existing equipment and processes used in the facility sample cells for 'pulling' samples from the radioactive waste stream and performing equipment in-cell repairs/replacements. RSE has designed and tested equipment for improving remote in-cell sampling evolutions and reducing the time required for in-cell maintenance of existing equipment. The equipment within the present process tank sampling system has been in constant use since the facility start-up over 17 years ago. At present, the method for taking samples within the sample cells produces excessive maintenance and downtime due to frequent failures relative to the sampling station equipment and manipulator. Location and orientation of many sampling stations within the sample cells is not conducive to manipulator operation. The overextension of manipulators required to perform many in-cell operations is a major cause of manipulator failures. To improve sampling operations and reduce downtime due to equipment maintenance, a Portable Sampling Station (PSS), wireless in-cell cameras, and new commercially available sampling technology has been designed, developed and/or adapted and tested. The uniqueness of the design(s), the results of the scoping tests, and the benefits relative to in-cell operation and reduction of waste are presented.

Marzolf, A

2007-11-26T23:59:59.000Z

69

Replacement Capability for Disposal of Remote-Handled Low-Level Waste Generated at the Department of Energys Idaho Site  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FINDING OF NO SIGNIFICANT IMPACT FINDING OF NO SIGNIFICANT IMPACT FOR THE ENVIRONMENTAL ASSESSMENT FOR THE REPLACEMENT CAPABILITY FOR THE DISOPOSAL OF REMOTE-HANDLED LOW-LEVEL RADIOACTIVE WASTE GENERATED AT THE DEPARTMENT OF ENERGY'S IDAHO SITE Agency: U. S. Department of Energy (DOE) Action: Finding ofNo Significant Impact (FONSI) Summary: Operations conducted in support ofIdaho National Laboratory (INL) and Naval Reactors Facility (NRF) missions on the Idaho site generate low-level radioactive waste (LL W). DOE classifies some of the LL W generated at the INL as remote-handled LL W because its potential radiation dose is high enough to require additional protection of workers using distance and shielding. Remote-handled wastes are those with radiation levels exceeding 200 millirem

70

Project Location  

E-Print Network (OSTI)

USGS quadrangle base-map. 2. Plot Plan with Exploration Data with Building Footprint: 1 boring or exploration shaft per 5000 ft 2, with minimum of 2 for any one building. Exploratory trench locations. 3. Site Coordinates: (Latitude & Longitude) Engineering Geology/Site Characterization 4. Regional Geology and Regional Fault Maps: Concise page-sized illustrations with site plotted. 5. Geologic Map of Site: Detailed (large-scale) geologic map with proper symbols and geologic legend. 6. Subsurface Geology: Engineering geology description summarized from boreholes or trench logs. Summarize ground water conditions. 7. Geologic Cross Sections: Two or more detailed geologic sections with pertinent foundations and site grading. 8. Active Faulting & Coseismic Deformation Across Site: Prepare page-sized extract map of Alquist-Priolo Earthquake Fault Zones and/or any potential fault rupture hazard identified from the Safety Element of the local agency (city or county); show location of fault investigation trenches; 50-foot setbacks perpendicular from fault plane and proposed

Date Reviewed __________________________

2007-01-01T23:59:59.000Z

71

Assessment of Potential Flood Events and Impacts at INL's Proposed Remote-Handled Low-Level Waste Disposal Facility Sites  

Science Conference Proceedings (OSTI)

Rates, depths, erosion potential, increased subsurface transport rates, and annual exceedance probability for potential flooding scenarios have been evaluated for the on-site alternatives of Idaho National Laboratorys proposed remote handled low-level waste disposal facility. The on-site disposal facility is being evaluated in anticipation of the closure of the Radioactive Waste Management Complex at the INL. An assessment of flood impacts are required to meet the Department of Energys Low-Level Waste requirements (DOE-O 435.1), its natural phenomena hazards assessment criteria (DOE-STD-1023-95), and the Radioactive Waste Management Manual (DOE M 435.1-1) guidance in addition to being required by the National Environmental Policy Act (NEPA) environmental assessment (EA). Potential sources of water evaluated include those arising from (1) local precipitation events, (2) precipitation events occurring off of the INL (off-site precipitation), and (3) increased flows in the Big Lost River in the event of a Mackay Dam failure. On-site precipitation events include potential snow-melt and rainfall. Extreme rainfall events were evaluated for the potential to create local erosion, particularly of the barrier placed over the disposal facility. Off-site precipitation carried onto the INL by the Big Lost River channel was evaluated for overland migration of water away from the river channel. Off-site precipitation sources evaluated were those occurring in the drainage basin above Mackay Reservoir. In the worst-case scenarios, precipitation occurring above Mackay Dam could exceed the dams capacity, leading to overtopping, and eventually complete dam failure. Mackay Dam could also fail during a seismic event or as a result of mechanical piping. Some of the water released during dam failure, and contributing precipitation, has the potential of being carried onto the INL in the Big Lost River channel. Resulting overland flows from these flood sources were evaluated for their erosion potential, ability to overflow the proposed disposal facility, and for their ability to increase migration of contaminants from the facility. The assessment of available literature suggests that the likelihood of detrimental flood water impacting the proposed RH-LLW facility is extremely low. The annual exceedance probability associated with uncontrolled flows in the Big Lost River impacting either of the proposed sites is 1x10-5, with return interval (RI) of 10,000yrs. The most probable dam failure scenario has an annual exceedance probability of 6.3x10-6 (1.6x105 yr RI). In any of the scenarios generating possible on-site water, the duration is expected to be quite short, water depths are not expected to exceed 0.5 m, and the erosion potential can easily be mitigated by emplacement of a berm (operational period), and an engineered cover (post closure period). Subsurface mobilization of radionuclides was evaluated for a very conservative flooding scenario resulting in 50 cm deep, 30.5 day on-site water. The annual exceedance probability for which is much smaller than 3.6x10-7 (2.8x106 yr RI). For the purposes of illustration, the facility was assumed to flood every 500 years. The periodically recurring flood waters were predicted to marginally increase peak radionuclide fluxes into the aquifer by at most by a factor of three for non-sorbing radionuclides, and to have limited impact on peak radionuclide fluxes into the aquifer for contaminants that do sorb.

A. Jeff Sondrup; Annette L. Schafter

2010-09-01T23:59:59.000Z

72

Replacement Capability for Disposal of Remote-Handled Low-Level Waste Generated at the Department of Energys Idaho Site  

NLE Websites -- All DOE Office Websites (Extended Search)

93 93 Environmental Assessment for the Replacement Capability for Disposal of Remote-Handled Low-Level Radioactive Waste Generated at the Department of Energy's Idaho Site Final December 2011 Department of Energy Idaho Operations Office 1955 Fremont Avenue Idaho Falls, ID 83415 December 21, 2011 Dear Citizen: The U.S. Department of Energy (DOE) has completed the Final Environmental Assessment (EA) for the Replacement Capability for Disposal of Remote-Handled Low-Level Radioactive Waste Generated at the Department of Energy's Idaho Site and determined that a Finding of No Significant Impact (FONSI) is appropriate. The draft EA was made available for an 81-day public review and comment period on September 1,2011. DOE considered all comments made

73

Behavior-based remote executing agents  

E-Print Network (OSTI)

remote execution semantics, and intermediary commu- nication handling)remote, more advantageous, location. ReAgents simplify the use of mobile agent technology by transparently handling

Hung, Eugene

2006-01-01T23:59:59.000Z

74

Geobotanical Remote Sensing Applied to Targeting New Geothermal Resource Locations in the U.S. Basin and Range with a Focus on Dixie Meadows, NV  

DOE Green Energy (OSTI)

This paper presents an overview of the work our collaboration is doing to increase the detailed mapped resource base for geothermal exploration in the Western US. We are imaging several large areas in the western US with high resolution airborne hyperspectral and satellite multispectral sensors. We have now entered the phase where the remote sensing techniques and tools we are developing are mature enough to be combined with other geothermal exploration techniques such as aeromagnetic, seismic, well logging and coring data. The imaging sensors and analysis techniques we have developed have the ability to map visible faults, surface effluents, altered minerals, subtle hidden faults. Large regions are being imaged at reasonable costs. The technique of geobotanical remote sensing for geothermal signatures is based on recent successes in mapping hidden faults, high temperature altered mineralization, clays, hot and cold springs and CO2 effluents the Long Valley Caldera and Mammoth Mountain in California. The areas that have been imaged include Mammoth Mountain and the Long Valley Caldera, Dixie Meadows NV, Fish Lake Valley NV, and Brady Hot Springs. Areas that are being imaged in the summer of 2003 are the south moat of the Long Valley Caldera, Mammoth Mountain western Pickles, Nash, Kasameyer, Foxall, Martini, Cocks, Kennedy-Bowdoin, McKnight, Silver, Potts, flanks, Mono Inyo chain north of Mammoth Mountain in CA, and the Humboldt Block in NV. This paper focuses on presenting the overview of the high-resolution airborne hyperspectral image acquisition that was done at Dixie Meadows NV in August 2002. This new imagery is currently being analyzed and combined with other field data by all of the authors on this paper. Results of their work up until the time of the conference will be presented in papers in the remote sensing session.

Pickles, W. L.; Nash, G. D.; Calvin, W. M.; Martini, B. A.; Cocks, P. A.; Kenedy-Bowdoin, T.; Mac Knight, R. B.; Silver, E. A.; Potts, D. C.; Foxall, W.; Kasameyer, P.; Waibel, A. F.

2003-01-01T23:59:59.000Z

75

Remote Sensing and Control for Establishing and Maintaining Digital Irrigation  

E-Print Network (OSTI)

The remotely sensed data from an unknown location is transmitted in real time through internet and gathered in a PC. The data is collected for a considerable period of time and analyzed in PC as to assess the suitability and fertility of the land for establishing an electronic plantation in that area. The analysis also helps deciding the plantation of appropriate plants in the location identified. The system performing this task with appropriate transducers installed in remote area, the methodologies involved in transmission and data gathering are reported.. The second part of the project deals with data gathering from remote site and issuing control signals to remote appliances in the site; all performed through internet. Therefore, this control scheme is a duplex system monitoring the irrigation activities by collecting data in one direction and issuing commands on the opposite direction. This scheme maintains the digital irrigation systems effectively and efficiently as to utilize the resources optimally f...

cellatoglu, Akin

2012-01-01T23:59:59.000Z

76

The Savannah River Site (SRS) is located in south-central South Carolina approximately 100 miles from the Atlantic Coast  

NLE Websites -- All DOE Office Websites (Extended Search)

124 124 Revision 0 Tank 18/Tank 19 Special Analysis for the Performance Assessment for the F-Tank Farm at the Savannah River Site February 2012 Prepared by: Savannah River Remediation LLC Closure and Waste Disposal Authority Aiken, SC 29808 Prepared for U.S. Department of Energy Under Contract No. DE-AC09-09SR22505 Tank 18/Tank 19 Special Analysis for the SRR-CWDA-2010-00124 Performance Assessment for the Revision 0 F-Tank Farm at the Savannah River Site February 2012 Page 2 of 132 TABLE OF CONTENTS TABLE OF CONTENTS ............................................................................................................. 2 LIST OF FIGURES ...................................................................................................................... 4

77

Conoco's new approach to drill site construction in difficult, remote, swamp and jungle terrain Irian Jaya, Indonesia  

SciTech Connect

In October 1982, Conoco Irian Jaya as operator: and partners: Pertamina, Inpex Bintuni Limited, and Moeco Irian Jaya Company, mobilized construction equipment from Singapore to the KBS ''A'' contract area in Irian Jaya, Indonesia for the purpose of constructing a base camp and drill three exploratory sites. What made this construction effort different from others previously used in Irian Jaya; was that it incorporated several new and unique features, namely: a turnkey approach to construction; that is Conoco providing complete set of specifications and conditions with contractor assuming risks for a lump sum payment; special equipment designed by contractor for Irian Jaya operations; an incentive to co pensate or penalize contractor for helicopter hours flown below or above a predetermined number; structural steel pile platform designs for two swamp locations (Ayot and Aum), as opposed to the more conventional corduroy timber log-plank arrangement; and drilling rig pads designed for specific heli-rig with limited extra space. All work was successfully completed within the time frame stipulated in the contract, that is five months from the time the contractor was notified to begin mobilization of equipment, materials and personnel.

Roodriguez, F.H.

1984-02-01T23:59:59.000Z

78

Status report on the Spent-Fuel Test-Climax, Nevada Test Site: a test of dry storage of spent fuel in a deep granite location  

SciTech Connect

The Spent Fuel Test-Climax (SFT-C) is located at a depth of 420 m in the Climax granite at the Nevada Test Site. The test array contains 11 canistered PWR fuel assemblies, plus associated electrical simulators and electrical heaters. There are nearly 900 channels of thermal, radiation, stress, displacement, and test control instrumentation. This paper is a general status report on the test, which started in May 1980.

Ramspott, L.D.; Ballou, L.B.; Patrick, W.C.

1982-03-01T23:59:59.000Z

79

Interpreting Remote Sensing NOx Measurements  

E-Print Network (OSTI)

Interpreting Remote Sensing NOx Measurements Robert Slott, Consultant, Donald Stedman and Saj tailpipe emissions (HC, CO, NOx) are changing with time hUse remote sensing hMeasurements in at least 4 of the year at each location hUniform QC/QA and data reporting Paper # 2001-01-3640 #12;Remote Sensing

Denver, University of

80

EIS-0426: Site-Wide Environmental Impact Statement for Continued Operation of the Department of Energy / National Nuclear Security Administration Nevada National Security Site and Off-Site Locations in the State of Nevada  

Energy.gov (U.S. Department of Energy (DOE))

This Site-Wide EIS evaluates the potential environmental impacts of proposed alternatives for continued management and operation of the Nevada National Security Site (NNSS) (formerly known as the Nevada Test Site) and other U.S. Department of Energy/National Nuclear Security Administration (DOE/NNSA)-managed sites in Nevada.

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

An Integrated Mapping And Remote Sensing Investigation Of The Structural  

Open Energy Info (EERE)

Mapping And Remote Sensing Investigation Of The Structural Mapping And Remote Sensing Investigation Of The Structural Control For Fumarole Location In The Eburru Volcanic Complex, Kenya Rift Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Paper: An Integrated Mapping And Remote Sensing Investigation Of The Structural Control For Fumarole Location In The Eburru Volcanic Complex, Kenya Rift Details Activities (0) Areas (0) Regions (0) Abstract: The Eburru volcanic complex is located in the central portion of the Kenya Rift. It belongs to the complex of volcanoes - Suswa, Longonot, Olkaria, Eburru, and Menengai - that. form the Kenya Dome. These volcanoes are geothermal fields, and Olkaria is the site for the first geothermal power plant commissioned in 1981 in the East African Rift System (EARS).

82

Objective Determination of Cloud Heights and Radar Reflectivities Using a Combination of Active Remote Sensors at the ARM CART Sites  

Science Conference Proceedings (OSTI)

The U.S. Department of Energys Atmospheric Radiation Measurement (ARM) Program is deploying sensitive, millimeter-wave cloud radars at its Cloud and Radiation Test Bed (CART) sites in Oklahoma, Alaska, and the tropical western Pacific Ocean. The ...

Eugene E. Clothiaux; Thomas P. Ackerman; Gerald G. Mace; Kenneth P. Moran; Roger T. Marchand; Mark A. Miller; Brooks E. Martner

2000-05-01T23:59:59.000Z

83

Small geothermal electric systems for remote powering  

DOE Green Energy (OSTI)

This report describes conditions and costs at which quite small (100 to 1,000 kilowatt) geothermal systems could be used for off-grid powering at remote locations. This is a first step in a larger process of determining locations and conditions at which markets for such systems could be developed. The results suggest that small geothermal systems offer substantial economic and environmental advantages for powering off-grid towns and villages. Geothermal power is most likely to be economic if the system size is 300 kW or greater, down to reservoir temperatures of 100{degree}C. For system sizes smaller than 300 kW, the economics can be favorable if the reservoir temperature is about 120{degree}C or above. Important markets include sites remote from grids in many developing and developed countries. Estimates of geothermal resources in many developing countries are shown.

Entingh, Daniel J.; Easwaran, Eyob.; McLarty, Lynn

1994-08-08T23:59:59.000Z

84

The morpho-topographic and cartographic analysis of the archaeological site Cornesti "Iarcuri", Timis County, Romania, using computer sciences methods (GIS and Remote Sensing techniques)  

E-Print Network (OSTI)

The archaeological site Cornesti "Iarcuri" is the largest earth fortification in Romania, made out of four concentric compounds, spreading over 1780 hectares. It is known since 1700, but it had only a few small attempts of systematic research, the fortress gained interest only after the publishing of some satellite images by Google Earth. It is located in an area of high fields and it occupies three interfluves and contains two streams. Our paper contains a geomorphologic, topographic and cartographic analysis of the site in order to determine the limits, the structure, the morphology, the construction technique and the functionality of such a fortification.Our research is based on satellite image analysis, on archaeological topography, on soil, climate and vegetation analysis as a way to offer a complex image, through this interdisciplinary study of landscape archaeology. Through our work we try not to date the site as this objective will be achieved only after completing the systematic excavations which sta...

Micle, Dorel; Maruia, Liviu

2009-01-01T23:59:59.000Z

85

Structural acceptance criteria for the evaulation of existing double-shell waste storage tanks located at the Hanford site, Richland, Washington  

SciTech Connect

The structural acceptance criteria contained herein for the evaluation of existing underground double-shell waste storage tanks located at the Hanford Site is part of the Life Management/Aging Management Program of the Tank Waste Remediation System. The purpose of the overall life management program is to ensure that confinement of the waste is maintained over the required service life of the tanks. Characterization of the present condition of the tanks, understanding and characterization of potential degradation mechanisms, and development of tank structural acceptance criteria based on previous service and projected use are prerequisites to assessing tank integrity, to projecting the length of tank service, and to developing and applying prudent fixes or repairs. The criteria provided herein summarize the requirements for the analysis and structural qualification of the existing double-shell tanks for continued operation. Code reconciliation issues and material degradation under aging conditions are addressed. Although the criteria were developed for double-shell tanks, many of the provisions are equally applicable to single-shell tanks. However, the criteria do not apply to the evaluation of tank appurtenances and buried piping.

Julyk, L.J.; Day, A.D.; Dyrness, A.D.; Moore, C.J.; Peterson, W.S.; Scott, M.A.; Shrivastava, H.P.; Sholman, J.S.; Watts, T.N.

1995-09-01T23:59:59.000Z

86

Analysis of Remote Diagnosis Architecture for a PLCBbased Automated Assembly System  

E-Print Network (OSTI)

To troubleshoot equipment installed in geographically distant locations, equipment manufacturers and system integrators are increasingly resorting to remote diagnosis in order to reduce the down time of the equipment, thereby achieving savings in cost and time on both the customer and manufacturer side. Remote diagnosis involves the use of communication technologies to perform fault diagnosis of a system located at a site distant to a troubleshooter. In order to achieve remote diagnosis, several frameworks have been proposed incorporating advancements such as automated fault diagnosis, collaborative diagnosis and mobile communication techniques. Standards exist for the capabilities representative of different levels of remote equipment diagnosis. Several studies have been performed to analyze the ability of human machine interface to assist troubleshooters in local fault diagnosis. However, the ability of a remote diagnosis system architecture to assist the troubleshooter in performing diagnosis and the effects of the failure types and other factors in a remote diagnosis environment on remote troubleshooting performance are not frequently addressed. In this thesis, an attempt is made to understand the factors that affect remote troubleshooting performance: remote diagnosis architecture, nature of failure, skill level of the local operator and level of expertise of the remote troubleshooter. For this purpose, three hierarchical levels of remote diagnosis architectures to diagnose failures in a PLC based automated assembly system were built based on existing standards. Common failures in automated assembly systems were identified and duplicated. Experiments were performed in which expert and novice troubleshooters used these remote diagnosis architectures to diagnose different types of failures while working with novice and engineer operators. The results suggest that in the diagnosis of failures related to measured or monitored system variables by remote expert troubleshooters, remote troubleshooting performance improved with the increase in the levels of the remote diagnosis architectures. In contrast, in the diagnosis of these failures by novice troubleshooters, no significant difference was observed among the three architectures in terms of remote troubleshooting performance and the novice troubleshooters experienced problems with managing the increased information available. Failures unrelated to monitored system parameters resulted in significantly reduced remote troubleshooting performance with all the three architectures in comparison to the failures related to monitored system parameters for both expert and novice troubleshooters. The experts exhibited better information gathering capabilities by spending more time per information source and making fewer transitions between information sources while diagnosing failures. The increase in capabilities of the architectures resulted in reduced operator interaction to a to a greater extent with experts. The difference in terms of overall remote troubleshooting performance between engineer and novice operators was not found to be significant.

Sekar, Ramnath

2010-08-01T23:59:59.000Z

87

Remote sensing for the geobotanical and biogeochemical assessment of environmental contamination  

SciTech Connect

Under Contract Number DE-AC08-90NV10845, the DOE has funded the Desert Research Institute (DRI) to examine several aspects of remote sensing, specifically with respect to how its use might help support Environmental Restoration and Waste Management (ERWM) activities at DOE sites located throughout the country. This report represents partial fulfillment of DRI`s obligations under that contract and includes a review of relevant literature associated with remote sensing studies and our evaluation and recommendation as to the applicability of various remote sensing techniques for DOE needs. With respect to DOE ERWM activities, remote sensing may be broadly defined as collecting information about a target without actually being in physical contact with the object. As the common platforms for remote sensing observations are aircraft and satellites, there exists the possibility to rapidly and efficiently collect information over DOE sites that would allow for the identification and monitoring of contamination related to present and past activities. As DOE sites cover areas ranging from tens to hundreds of square miles, remote sensing may provide an effective, efficient, and economical method in support of ERWM activities. For this review, remote sensing has been limited to methods that employ electromagnetic (EM) energy as the means of detecting and measuring target characteristics.

Wickham, J.; Chesley, M.; Lancaster, J.; Mouat, D.

1993-01-01T23:59:59.000Z

88

Remote medicine  

Science Conference Proceedings (OSTI)

The international oil industry, catalyzed by a surge in exploration and production projects in remote regions, is giving health care for its travelers and expatriates a high priority. L.R. Aalund, the Journal`s Managing Editor--Technology, reports on why and how this is happening now. He covers this in articles on: health care in Russia, air ambulance evacuations, and the deployment of remote paramedics. Aalund gathered the information during trips to Finland and Russia and interviews with oil industry personnel, physicians, and other medical professionals in North America, Europe, and Siberia. Titles of the four topics presented in this special section on remote medicine are as follows: Oil companies focus on emergency care for expats in Russia; Air ambulance plan can be critical; Remote paramedics have high level of training; and Other facets of remote medicine.

NONE

1996-04-29T23:59:59.000Z

89

DOE and Colorado Mesa University Education Agreement Expands LM's Site  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Colorado Mesa University Education Agreement Expands LM's and Colorado Mesa University Education Agreement Expands LM's Site Reuse Portfolio DOE and Colorado Mesa University Education Agreement Expands LM's Site Reuse Portfolio October 16, 2012 - 2:49pm Addthis Rich Bush, DOE Site Manager, explains the Grand Junction, Colorado, Disposal Site to Colorado Mesa University students. Rich Bush, DOE Site Manager, explains the Grand Junction, Colorado, Disposal Site to Colorado Mesa University students. DOE Site Manager Rich Bush explains the Enhanced Cover Assessment Project to Colorado Mesa University students while standing next to one of LM’s Systems Operation and Analysis at Remote Sites locations, which collects data remotely and transmits it to LM servers daily. DOE Site Manager Rich Bush explains the Enhanced Cover Assessment Project

90

Reading Room Locations  

NLE Websites -- All DOE Office Websites (Extended Search)

FOIA Offices and Reading Rooms FOIA Offices and Reading Rooms FOIA Office Locations Our FOIA Officers are located at various sites throughout the DOE complex, each with responsibility for records located at or under the jurisdiction of the site. We recommend that you send your request directly to that specific site. This will shorten the processing time. However, if you do not know which location has responsive records, you may either call the Headquarters FOIA office at (202) 586-5955 to determine the appropriate office, or mail the request to the Headquarters FOIA office. Other records are publicly available in the facilities listed below: Headquarters U.S. Department of Energy FOIA/Privacy Act Group 1000 Independence Avenue, SW Washington, D.C. 20585 Phone: 202-586-5955 Fax: 202-586-0575

91

Remote Sensing  

E-Print Network (OSTI)

Evaluating ecological patterns and processes is crucial for the conservation of ecosystems [1]. In this view, remote sensing is a powerful tool for monitoring their status and change. This involves several tasks like biodiversity estimate, landscape ecology, and species distribution modeling, to name a few [2]. Due to the difficulties associated with field-based data collection [3], the use of remote sensing for estimating ecological status and change is promising since it provides a synoptic view of an area with a high temporal resolution [4]. Of course in some cases remote sensing should be viewed as a help to plan a field survey rather than a replacement of it. Further, its improper use may lead to pitfalls and misleading results. This special issue Ecological Status and Change by Remote Sensing is devoted to provide an almost complete overview of robust methods applied to ecological status and change estimate by remote sensing. The contributions published in this special issue cover most of the ecological fields of research involving remote sensing, in particular: (i) mapping vegetation, species distribution modeling and land use status and change; (ii) estimating environmental processes; (iii) developing landscape ecology metrics; (iv) assessing community biodiversity; and (v) estimating climatic parameters. The authors submitting their manuscript to this special issue of Remote Sensing are amongst the

Duccio Rocchini

2010-01-01T23:59:59.000Z

92

ARM - Instrument Location Table  

NLE Websites -- All DOE Office Websites (Extended Search)

govInstrumentsLocation Table govInstrumentsLocation Table Instruments Location Table Contacts Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Instrument Locations Site abbreviations explained in the key. Instrument Name Abbreviation NSA SGP TWP AMF C1 C2 EF BF CF EF IF C1 C2 C3 EF IF Aerosol Chemical Speciation Monitor ACSM Atmospheric Emitted Radiance Interferometer AERI Aethalometer AETH Ameriflux Measurement Component AMC Aerosol Observing System AOS Meteorological Measurements associated with the Aerosol Observing System AOSMET Broadband Radiometer Station BRS

93

Remote connector development study  

SciTech Connect

Plutonium-uranium extraction (PUREX) connectors, the most common connectors used at the Hanford site, offer a certain level of flexibility in pipe routing, process system configuration, and remote equipment/instrument replacement. However, these desirable features have inherent shortcomings like leakage, high pressure drop through the right angle bends, and a limited range of available pipe diameters that can be connect by them. Costs for construction, maintenance, and operation of PUREX connectors seem to be very high. The PUREX connector designs include a 90{degree} bend in each connector. This increases the pressure drop and erosion effects. Thus, each jumper requires at least two 90{degree} bends. PUREX connectors have not been practically used beyond 100 (4 in.) inner diameter. This study represents the results of a survey on the use of remote pipe-connection systems in US and foreign plants. This study also describes the interdependence between connectors, remote handling equipment, and the necessary skills of the operators.

Parazin, R.J.

1995-05-01T23:59:59.000Z

94

Remote sensing for wind power potential: a prospector's handbook  

DOE Green Energy (OSTI)

Remote sensing can aid in identifying and locating indicators of wind power potential from the terrestrial, marine, and atmospheric environments (i.e.: wind-deformed trees, white caps, and areas of thermal flux). It is not considered as a tool for determining wind power potential. A wide variety of remotely sensed evidence is described in terms of the scale at which evidence of wind power can be identified, and the appropriate remote sensors for finding such evidence. Remote sensing can be used for regional area prospecting using small-scale imagery. The information from such small-scale imagery is most often qualitative, and if it is transitory, examination of a number of images to verify presistence of the feature may be required. However, this evidence will allow rapid screening of a large area. Medium-scale imagery provides a better picture of the evidence obtained from small-scale imagery. At this level it is best to use existing imagery. Criteria relating to land use, accessibility, and proximity of candidate sites to nearby transmission lines can also be effectively evaluated from medium-scale imagery. Large-scale imagery provides the most quantitative evidence of the strength of wind. Wind-deformed trees can be identified at a large number of sites using only a few hours in locally chartered aircraft. A handheld 35mm camera can adequately document any evidence of wind. Three case studies that employ remote sensing prospecting techniques are described. Based on remotely sensed evidence, the wind power potential in three geographically and climatically diverse areas of the United States is estimated, and the estimates are compared to actual wind data in those regions. In addition, the cost of each survey is discussed. The results indicate that remote sensing for wind power potential is a quick, cost effective, and fairly reliable method for screening large areas for wind power potential.

Wade, J.E.; Maule, P.A.; Bodvarsson, G.; Rosenfeld, C.L.; Woolley, S.G.; McClenahan, M.R.

1983-02-01T23:59:59.000Z

95

Remote Facilities | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Remote Facilities Remote Facilities Remote Facilities October 16, 2013 - 4:55pm Addthis Renewable Energy Options for Renovations in Remote Areas Photovoltaics (PV) Small Wind Daylighting Solar Water Heating Passive Solar Design Biomass Heating When a Federal building or facility is located away from existing power lines, many renewable energy technologies including photovoltaics and wind become cost-effective options when compared to extending utilities or transporting fuel for onsite generators. Photovoltaics Photovoltaics (PV) are often cost-effective in remote power applications. In these circumstances, the system is coupled with batteries and can provide complete facility power. Proper system design is critical and must account for the building electrical loads and be sized to meet that load

96

REGULATION OF CARBON SEQUESTRATION AND WATER USE IN A OZARK FOREST: PROPOSING A NEW STRATEGICALLY LOCATED AMERIFLUX TOWER SITE IN MISSOURI  

Science Conference Proceedings (OSTI)

by June 14, 2004, the MOFLUX site was fully instrumented and data streams started to flow. A primary accomplished deliverable for the project period was the data streams of CO{sub 2} and water vapor fluxes and numerous meteorological variables (from which prepared datasets have been submitted to the AmeriFlux data archive for 2004-2006, Additionally, measurements of leaf biochemistry and physiology, biomass inventory, tree allometry, successional trends other variables were obtained.

Pallardy, Stephen G

2013-04-19T23:59:59.000Z

97

Remote repair appliance  

DOE Patents (OSTI)

A remote appliance for supporting a tool for performing work at a work site on a substantially circular bore of a work piece and for providing video signals of the work site to a remote monitor comprises: a base plate having an inner face and an outer face; a plurality of rollers, wherein each roller is rotatably and adjustably attached to the inner face of the base plate and positioned to roll against the bore of the work piece when the base plate is positioned against the mouth of the bore such that the appliance may be rotated about the bore in a plane substantially parallel to the base plate; a tool holding means for supporting the tool, the tool holding means being adjustably attached to the outer face of the base plate such that the working end of the tool is positioned on the inner face side of the base plate; a camera for providing video signals of the work site to the remote monitor; and a camera holding means for supporting the camera on the inner face side of the base plate, the camera holding means being adjustably attached to the outer face of the base plate. In a preferred embodiment, roller guards are provided to protect the rollers from debris and a bore guard is provided to protect the bore from wear by the rollers and damage from debris. 5 figs.

Heumann, F.K.; Wilkinson, J.C.; Wooding, D.R.

1997-12-16T23:59:59.000Z

98

Development of improved methods for remote access of DIII-D data and data analysis  

SciTech Connect

The DIII-D tokamak is a national fusion research facility. There is an increasing need to access data from remote sites in order to facilitate data analysis by collaborative researchers at remote locations, both nationally and internationally. In the past, this has usually been done by remotely logging into computers at the DIII-D site. With the advent of faster networking and powerful computers at remote sites, it is becoming possible to access and analyze data from anywhere in the world as if the remote user were actually at the DIII-D site. The general mechanism for accessing DIII-D data has always been via the PTDATA subroutine. Substantial enhancements are being made to that routine to make it more useful in a non-local environment. In particular, a caching mechanism is being built into PTDATA to make network data access more efficient. Studies are also being made of using Distributed File System (DFS) disk storage in a Distributed Computing Environment (DCE). A data server has been created that will migrate, on request, shot data from the DIII-D environment into the DFS environment.

Greene, K.L.; McHarg, B.B. Jr.

1997-11-01T23:59:59.000Z

99

EERE: Clean Cities Mobile Sites  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Clean Cities Mobile Sites Alternative Fueling Station Locator FuelEconomy.gov Truck Stop Electrification Locator...

100

REMOTE SENSING GEOLOGICAL SURVEY  

E-Print Network (OSTI)

REMOTE SENSING IN GEOLOGICAL SURVEY OF BRAZIL August/2010 Mônica Mazzini Perrotta Remote Sensing Division Head #12;SUMMARY The Geological Survey of Brazil mission The Remote Sensing Division Main remote, Paleontology, Remote Sensing Director of Hydrology and Land Management But Remote Sensing Division gives

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

The Project Shoal Area (PSA), located about 50 km southeast of Fallon, Nevada, was the site for a 12-kiloton-ton nuclear test  

Office of Legacy Management (LM)

NV/13609-53 NV/13609-53 Development of a Groundwater Management Model for the Project Shoal Area prepared by Gregg Lamorey, Scott Bassett, Rina Schumer, Douglas P. Boyle, Greg Pohll, and Jenny Chapman submitted to Nevada Site Office National Nuclear Security Administration U.S. Department of Energy Las Vegas, Nevada September 2006 Publication No. 45223 Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof or its contractors or subcontractors. Available for sale to the public, in paper, from: U.S. Department of Commerce

102

University Location Project Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Location Project Description Location Project Description Boise State University Boise, Idaho Boise State University has undertaken a study of the structural setting and geothermal potential at Neal Hot Springs that will integrate geology, geochemistry, and geophysics to analyze the site on the western Snake River plain. Boise State will determine if Neal Hot Springs sustains the necessary rock dilation and conduit pathways for hydrothermal fluid flow and successful geothermal development. The result will be new data acquisition, including a deep geophysical survey and fault surface data. Colorado School of Mines Golden, Colorado Colorado School of Mines will conduct an investigation near Homedale, Idaho, an area that straddles volcanic rock and unconsolidated sediments.

103

An Integrated Mapping And Remote Sensing Investigation Of The...  

Open Energy Info (EERE)

And Remote Sensing Investigation Of The Structural Control For Fumarole Location In The Eburru Volcanic Complex, Kenya Rift Jump to: navigation, search GEOTHERMAL ENERGYGeothermal...

104

DOE - Office of Legacy Management -- Shoal Test Site - NV 03  

Office of Legacy Management (LM)

Shoal Test Site - NV 03 Shoal Test Site - NV 03 FUSRAP Considered Sites Site: SHOAL TEST SITE (NV.03 ) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: Sand Springs Range NV.03-1 Location: Near U.S. Highway 50 , Fallon , Nevada NV.03-2 Evaluation Year: 1987 NV.03-2 Site Operations: Underground nuclear detonation site. NV.03-1 Site Disposition: Eliminated - Potential for contamination remote NV.03-2 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: None at the Surface and Fission Fragments Within the Subsurface NV.03-1 Radiological Survey(s): Yes Site Status: Eliminated from consideration under FUSRAP Also see Documents Related to SHOAL TEST SITE NV.03-1 - Report (NVO-1229-105 Part I); Evaluation of the Project

105

EIS-0426: Draft Site-Wide Environmental Impact Statement | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Draft Site-Wide Environmental Impact Statement Draft Site-Wide Environmental Impact Statement EIS-0426: Draft Site-Wide Environmental Impact Statement Continued Operation of the Nevada National Security Site and Off-Site Locations in the State of Nevada Abstract: This Site-Wide Environmental Impact Statement for the Continued Operation of the Department of Energy/National Nuclear Security Administration Nevada National Security Site and Off-Site Locations in the State of Nevada (NNSS SWEIS) analyzes the potential environmental impacts of proposed alternatives for continued management and operation of the Nevada National Security Site (NNSS) (formerly known as the Nevada Test Site) and other U.S. Department of Energy/National Nuclear Security Administration (DOE/NNSA)-managed sites in Nevada, including the Remote

106

Location and identification of radioactive waste in Massachusetts Bay  

SciTech Connect

The accurate location and identification of hazardous waste materials dumped in the world`s oceans are becoming an increasing concern. For years, the oceans have been viewed as a convenient and economical place to dispose of all types of waste. In all but a few cases, major dump sites have been closed leaving behind years of accumulated debris. The extent of past environmental damage, the possibility of continued environmental damage, and the possibility of hazardous substances reaching the human food chain need to be carefully investigated. This paper reports an attempt to accurately locate and identify the radioactive component of the waste material. The Department of Energy`s Remote Sensing Laboratory (RSL), in support of the US Environmental Protection Agency (EPA), provided the precision navigation system and prototype underwater radiological monitoring equipment that were used during this project. The paper also describes the equipment used, presents the data obtained, and discusses future equipment development.

Colton, D.P.; Louft, H.L.

1993-12-31T23:59:59.000Z

107

U-192: VMware Workstation/Player VM Remote Device Bug Lets Local or Remote  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

92: VMware Workstation/Player VM Remote Device Bug Lets Local or 92: VMware Workstation/Player VM Remote Device Bug Lets Local or Remote Users Deny Service U-192: VMware Workstation/Player VM Remote Device Bug Lets Local or Remote Users Deny Service June 15, 2012 - 7:00am Addthis PROBLEM: A vulnerability was reported in VMware Workstation/Player. PLATFORM: Version(s): Workstation 8.x, Player 4.x aBSTRACT: A local or remote user can cause denial of service conditions on the target virtual system. reference LINKS: Vendor Advisory Security Tracker ID 1027173 CVE-2012-3289 IMPACT ASSESSMENT: High Discussion: A user with the ability to modify communications data between a remote virtual device (e.g., CD-ROM, keyboard) located on a physically separate system and the target virtual machine can cause the target virtual machine to crash.

108

U-192 VMware Workstation/Player VM Remote Device Bug Lets Local or Remote  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

VMware Workstation/Player VM Remote Device Bug Lets Local or VMware Workstation/Player VM Remote Device Bug Lets Local or Remote Users Deny Service U-192 VMware Workstation/Player VM Remote Device Bug Lets Local or Remote Users Deny Service June 15, 2012 - 7:00am Addthis PROBLEM: A vulnerability was reported in VMware Workstation/Player. PLATFORM: Version(s): Workstation 8.x, Player 4.x ABSTRACT: A local or remote user can cause denial of service conditions on the target virtual system. reference LINKS: Vendor Advisory Security Tracker ID 1027173 CVE-2012-3289 IMPACT ASSESSMENT: High Discussion: A user with the ability to modify communications data between a remote virtual device (e.g., CD-ROM, keyboard) located on a physically separate system and the target virtual machine can cause the target virtual machine to crash. Impact:

109

Remote Access  

NLE Websites -- All DOE Office Websites (Extended Search)

SSL-portal. Enter your Z number and Cryptocard passcode. From the SSL-portal menu, choose Research Library. Navigate to your desired location OR Use the URLs below: Los Alamos...

110

U-254: Webmin Flaws Let Remote Authenticated Users Execute Arbitrary...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

System Multiple Vulnerabilities U-255: Apache Wicket Input Validation Flaw Permits Cross-Site Scripting Attacks V-104: Oracle Java Flaw Lets Remote Users Execute Arbitrary Code...

111

Mobile Alternative Fueling Station Locator  

Science Conference Proceedings (OSTI)

The Department of Energy's Alternative Fueling Station Locator is available on-the-go via cell phones, BlackBerrys, or other personal handheld devices. The mobile locator allows users to find the five closest biodiesel, electricity, E85, hydrogen, natural gas, and propane fueling sites using Google technology.

Not Available

2009-04-01T23:59:59.000Z

112

Express location: supporting coordination of mobile delivery work  

Science Conference Proceedings (OSTI)

This paper introduces Express Location, a mobile web application, supporting drivers in delivery service in the daily coordination of work. Remote communication and cooperation takes place on a shared map view around the drivers' locations and next stop, ... Keywords: CSCW, delivery service, drawing, drivers, express location, field study, location-awareness, mobility, visual representations, workspace

Markus Westerlund; Maria Normark; Lars Erik Holmquist

2011-03-01T23:59:59.000Z

113

Nevada Test Site Environmental Report 2008 Attachment A: Site Description  

SciTech Connect

This attachment expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2008 (National Security Technologies, LLC [NSTec], 2009a). Included are subsections that summarize the sites geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the sites environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

Cathy A. Wills

2009-09-01T23:59:59.000Z

114

University Location Project Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sustainable Design will create a detailed profile of the Snake River Plain using geologic remote sensing to identify areas of greater thermal potential from a topographic...

115

Remote Book Browsing System using a Mobile Manipulator Tetsuo Tomizawa  

E-Print Network (OSTI)

Remote Book Browsing System using a Mobile Manipulator Tetsuo Tomizawa , Akihisa Ohya and Shin in this research is to help humans browse books located in a library from a remote location via the Internet. This task was decomposed into three major parts which are, the extraction and return of a book from

Ohya, Akihisa

116

Nevada Test Site Environmental Report 2005, Attachment A - Site Description  

SciTech Connect

This appendix to the ''Nevada Test Site Environmental Report 2005'', dated October 2006 (DOE/NV/11718--1214; DOE/NV/25946--007) expands on the general description of the Nevada Test Site (NTS) presented in the Introduction. Included are subsections that summarize the site?s geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site which afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This appendix complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

Cathy A. Wills

2006-10-01T23:59:59.000Z

117

Book Remote Browsing System using a Mobile Manipulator Task Accomplishment by Integrated Behaviors  

E-Print Network (OSTI)

/ , 21 Book Remote Browsing System using a Mobile Manipulator ­ Task Accomplishment by Integrated remote objects. A human uses the system to browse a book of a library from a remote location via. And we evaluated its performance through experimental results. Key Words: Access Media, Book Remote

Ohya, Akihisa

118

A Self-Calibrating Remote Control Chemical Monitoring System  

SciTech Connect

The Susie Mine, part of the Upper Tenmile Mining Area, is located in Rimini, MT about 15 miles southwest of Helena, MT. The Upper Tenmile Creek Mining Area is an EPA Superfund site with 70 abandoned hard rock mines and several residential yards prioritized for clean up. Water from the Susie mine flows into Tenmile Creek from which the city of Helena draws part of its water supply. MSE Technology Applications in Butte, Montana was contracted by the EPA to build a treatment system for the Susie mine effluent and demonstrate a system capable of treating mine waste water in remote locations. The Idaho National Lab was contracted to design, build and demonstrate a low maintenance self-calibrating monitoring system that would monitor multiple sample points, allow remote two-way communications with the control software and allow access to the collected data through a web site. The Automated Chemical Analysis Monitoring (ACAM) system was installed in December 2006. This thesis documents the overall design of the hardware, control software and website, the data collected while MSE-TAs system was operational, the data collected after MSE-TAs system was shut down and suggested improvements to the existing system.

Jessica Croft

2007-06-01T23:59:59.000Z

119

CMS FNAL Remote Operations Center  

NLE Websites -- All DOE Office Websites (Extended Search)

LHC@FNAL Remote Operations Center (ROC) at Fermilab is located on the first floor of Wilson Hall. From the ROC, shifters perform real-time monitoring of the data recorded by the CMS Experiment. LHC@FNAL Remote Operations Center (ROC) at Fermilab is located on the first floor of Wilson Hall. From the ROC, shifters perform real-time monitoring of the data recorded by the CMS Experiment. ROC WBM / WBM Twiki FNAL ELog Mailing List Agendas / ROC Presentations & Notes WBM Publications Runs CVS SiTracker / MTCC AEM / AEM help Screen Snapshot Service FAQ Accounts & Nodes New User Instructions WebCams CMS Workbook Directories / Glossaries Photos Vidyo / EVO Google / Wikipedia LHC@FNAL Computing Console Map Documents Mailing List One East Mtg Schedule rocshare Telephones To Do List Video Conferencing CMS Shifter CSC DAQ DataOps DQM / FNAL ROC ECAL Event Display HCAL Pixel Trigger Global Run Calendar CMS Live Contact List DAQ Status DAS

120

Sensing remote nuclear spins  

E-Print Network (OSTI)

Sensing single nuclear spins is a central challenge in magnetic resonance based imaging techniques. Although different methods and especially diamond defect based sensing and imaging techniques in principle have shown sufficient sensitivity, signals from single nuclear spins are usually too weak to be distinguished from background noise. Here, we present the detection and identification of remote single C-13 nuclear spins embedded in nuclear spin baths surrounding a single electron spins of a nitrogen-vacancy centre in diamond. With dynamical decoupling control of the centre electron spin, the weak magnetic field ~10 nT from a single nuclear spin located ~3 nm from the centre with hyperfine coupling as weak as ~500 Hz is amplified and detected. The quantum nature of the coupling is confirmed and precise position and the vector components of the nuclear field are determined. Given the distance over which nuclear magnetic fields can be detected the technique marks a firm step towards imaging, detecting and cont...

Zhao, Nan; Schmid, Berhard; Isoya, Junichi; Markham, Mathew; Twitchen, Daniel; Jelezko, Fedor; Liu, Ren-Bao; Fedder, Helmut; Wrachtrup, Jrg

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Solar Power Expert For Remote Robotic Explorers  

E-Print Network (OSTI)

Robotic exploration of remote areas to assist or replace human exploration reduces the cost, hazard and tedium of such exploration. For remote explorers, power is the most critical resource, and the most common source of that power is solar energy. Information about the robot configuration, the planned path, the terrain and the position of the sun can be processed by a solar power expert software module to calculate the power provided by a given plan of action. Using this information to select the best plans will enable remote robotic explorers to extend their lifetimes. This paper presents the development of a solar power expert and its implementation on a simulator. Several patterned path plans are evaluated with various solar panel configurations, starting times and locations, concentrating on polar regions. 1. EXPLORATION ROBOTS Capable and adaptable robots are needed for exploring areas too dangerous or costly for humans to visit. Planets, moons, and remote earthly locations suc...

Kimberly Shillcutt Robotics; Kimberly Shillcutt; William Whittaker

1999-01-01T23:59:59.000Z

122

A Forecasting/Nowcasting System for Remote Field Locations  

Science Conference Proceedings (OSTI)

Vast quantities of frequently updated weather data for both forecasting and nowcasting are generally required in meteorological field programs. The continuing synthesis of this data to suit specific operations is best accomplished using ...

Harry T. Ochs III; Stanley Q. Kidder

1989-02-01T23:59:59.000Z

123

Nevada Test Site Environmental Report 2007 Attachment A: Site Description  

SciTech Connect

This appendix expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2007 (U.S. Department of Energy [DOE], 2008). Included are subsections that summarize the site's geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site which afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

Cathy Wills

2008-09-01T23:59:59.000Z

124

Remote-Handled Transuranic Content Codes  

SciTech Connect

The Remote-Handled Transuranic (RH-TRU) Content Codes (RH-TRUCON) document describes the inventory of RH-TRU waste within the transportation parameters specified by the Remote-Handled Transuranic Waste Authorized Methods for Payload Control (RH-TRAMPAC).1 The RH-TRAMPAC defines the allowable payload for the RH-TRU 72-B. This document is a catalog of RH-TRU 72-B authorized contents by site. A content code is defined by the following components: A two-letter site abbreviation that designates the physical location of the generated/stored waste (e.g., ID for Idaho National Laboratory [INL]). The site-specific letter designations for each of the sites are provided in Table 1. A three-digit code that designates the physical and chemical form of the waste (e.g., content code 317 denotes TRU Metal Waste). For RH-TRU waste to be transported in the RH-TRU 72-B, the first number of this three-digit code is 3. The second and third numbers of the three-digit code describe the physical and chemical form of the waste. Table 2 provides a brief description of each generic code. Content codes are further defined as subcodes by an alpha trailer after the three-digit code to allow segregation of wastes that differ in one or more parameter(s). For example, the alpha trailers of the subcodes ID 322A and ID 322B may be used to differentiate between waste packaging configurations. As detailed in the RH-TRAMPAC, compliance with flammable gas limits may be demonstrated through the evaluation of compliance with either a decay heat limit or flammable gas generation rate (FGGR) limit per container specified in approved content codes. As applicable, if a container meets the watt*year criteria specified by the RH-TRAMPAC, the decay heat limits based on the dose-dependent G value may be used as specified in an approved content code. If a site implements the administrative controls outlined in the RH-TRAMPAC and Appendix 2.4 of the RH-TRU Payload Appendices, the decay heat or FGGR limits based on a 10-day shipping period (rather than the standard 60-day shipping period) may be used as specified in an approved content code.

Washington TRU Solutions

2006-12-01T23:59:59.000Z

125

Using GIS and Satellite Imagery to Locate  

E-Print Network (OSTI)

The purpose of this project is to show it is possible to use remote sensing techniques to detect oil seeps and oil spills and use ArcView to determine the hydrocarbon locations. Modern remote sensing software was used to process NASA's ASTER Multispectral Images. The files were loaded with Band 3 (0.76- 0.86 m) as Red, Band 2 (0.63- 069 m) as Green and Band 1 (0.52- 0.60 m) as Blue. ASTER's 15 m ground resolution and image enhancement techniques allowed the identification of offshore oil seeps in California and the detection of oil leaking from offshore production platforms in Azerbaijan.

Jay Rauschkolb

2003-01-01T23:59:59.000Z

126

Remote-Handled Transuranic Content Codes  

SciTech Connect

The Remote-Handled Transuranic (RH-TRU) Content Codes (RH-TRUCON) document representsthe development of a uniform content code system for RH-TRU waste to be transported in the 72-Bcask. It will be used to convert existing waste form numbers, content codes, and site-specificidentification codes into a system that is uniform across the U.S. Department of Energy (DOE) sites.The existing waste codes at the sites can be grouped under uniform content codes without any lossof waste characterization information. The RH-TRUCON document provides an all-encompassing|description for each content code and compiles this information for all DOE sites. Compliance withwaste generation, processing, and certification procedures at the sites (outlined in this document foreach content code) ensures that prohibited waste forms are not present in the waste. The contentcode gives an overall description of the RH-TRU waste material in terms of processes and|packaging, as well as the generation location. This helps to provide cradle-to-grave traceability ofthe waste material so that the various actions required to assess its qualification as payload for the72-B cask can be performed. The content codes also impose restrictions and requirements on themanner in which a payload can be assembled.The RH-TRU Waste Authorized Methods for Payload Control (RH-TRAMPAC), Appendix 1.3.7of the 72-B Cask Safety Analysis Report (SAR), describes the current governing procedures|applicable for the qualification of waste as payload for the 72-B cask. The logic for this|classification is presented in the 72-B Cask SAR. Together, these documents (RH-TRUCON,|RH-TRAMPAC, and relevant sections of the 72-B Cask SAR) present the foundation and|justification for classifying RH-TRU waste into content codes. Only content codes described in thisdocument can be considered for transport in the 72-B cask. Revisions to this document will be madeas additional waste qualifies for transport. |Each content code uniquely identifies the generated waste and provides a system for tracking theprocess and packaging history. Each content code begins with a two-letter site abbreviation thatindicates the shipper of the RH-TRU waste. The site-specific letter designations for each of the|DOE sites are provided in Table 1. Not all of the sites listed in Table 1 have generated/stored RH-|TRU waste.

Washington TRU Solutions

2001-08-01T23:59:59.000Z

127

Medical Sites  

NLE Websites -- All DOE Office Websites (Extended Search)

Medical Sites Name: Jenielle Location: NA Country: NA Date: NA Question: I started itching Aug. 1999. Diagnosed with ITP Oct.1999. I am in remission With a platelet count in...

128

ENGO 435 Remote Sensing LAB 1: INTRODUCTION TO REMOTE SENSING  

E-Print Network (OSTI)

ENGO 435 ­ Remote Sensing Fall 2003 LAB 1: INTRODUCTION TO REMOTE SENSING Due: By 4:30 pm on September 30th Objectives: To familiarize you with: Remote sensing resources on the Internet. Some remote (Metadata). Part A: Remote Sensing Resources There is a wealth of remote sensing information and data

Habib, Ayman

129

Vacuum Vessel Remote Handling  

E-Print Network (OSTI)

FIRE Vacuum Vessel and Remote Handling Overview B. Nelson, T. Burgess, T. Brown, H-M Fan, G. Jones #12;13 July 2002 Snowmass Review: FIRE Vacuum Vessel and Remote Handling 2 Presentation Outline · Remote Handling - Maintenance Approach & Component Classification - In-Vessel Transporter - Component

130

Uranium Lease Tracts Location Map | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Centers Field Sites Power Marketing Administration Other Agencies You are here Home Uranium Lease Tracts Location Map Uranium Lease Tracts Location Map Uranium Lease Tracts...

131

Location and Infrastructure  

NLE Websites -- All DOE Office Websites (Extended Search)

Facts, Figures Location and Infrastructure Location and Infrastructure LANL's mission is to develop and apply science and technology to ensure the safety, security, and...

132

Sandia National Laboratories: Locations  

NLE Websites -- All DOE Office Websites (Extended Search)

around the world. Sandia's executive management offices and larger laboratory complex are located in Albuquerque, New Mexico. Our second principal laboratory is located...

133

Vegetation Cover Analysis of Hazardous Waste Sites in Utah and...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Vegetation Cover Analysis of Hazardous Waste Sites in Utah and Arizona Using Hyperspectral Remote Sensing Vegetation Cover Analysis of Hazardous Waste Sites in Utah and Arizona...

134

FORMERLY UTILIZED SITES REMEDIAL ACTION PROGRAM ELIMINATION REPORT  

Office of Legacy Management (LM)

for Residual Radioactivity at Formerly Utilized Sites Remedial Action Program and Remote Surplus Facilities Management Program Sites (Rev. 1, July 1985). .. . -.-----...

135

DOE - Office of Legacy Management -- Tatum Salt Dome Test Site...  

Office of Legacy Management (LM)

Tatum Salt Dome Test Site - MS 01 FUSRAP Considered Sites Site: Tatum Salt Dome Test Site (MS.01) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site...

136

DOE - Office of Legacy Management -- Exxon Ray Point Site - 032  

Office of Legacy Management (LM)

Exxon Ray Point Site - 032 FUSRAP Considered Sites Site: Exxon Ray Point Site (032) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition:...

137

DEVELOPMENT OF REMOTE HANFORD CONNECTOR GASKET REPLACEMENT TOOLING FOR DWPF  

SciTech Connect

The Defense Waste Processing Facility (DWPF) requested the Savannah River National Laboratory (SRNL) to develop tooling and equipment to remotely replace gaskets in mechanical Hanford connectors to reduce personnel radiation exposure as compared to the current hands-on method. It is also expected that radiation levels will continually increase with future waste streams. The equipment is operated in the Remote Equipment Decontamination Cell (REDC), which is equipped with compressed air, two master-slave manipulators (MSM's) and an electro-mechanical manipulator (EMM) arm for operation of the remote tools. The REDC does not provide access to electrical power, so the equipment must be manually or pneumatically operated. The MSM's have a load limit at full extension of ten pounds, which limited the weight of the installation tool. In order to remotely replace Hanford connector gaskets several operations must be performed remotely, these include: removal of the spent gasket and retaining ring (retaining ring is also called snap ring), loading the new snap ring and gasket into the installation tool and installation of the new gasket into the Hanford connector. SRNL developed and tested tools that successfully perform all of the necessary tasks. Removal of snap rings from horizontal and vertical connectors is performed by separate air actuated retaining ring removal tools and is manipulated in the cell by the MSM. In order install a new gasket, the snap ring loader is used to load a new snap ring into a groove in the gasket installation tool. A new gasket is placed on the installation tool and retained by custom springs. An MSM lifts the installation tool and presses the mounted gasket against the connector block. Once the installation tool is in position, the gasket and snap ring are installed onto the connector by pneumatic actuation. All of the tools are located on a custom work table with a pneumatic valve station that directs compressed air to the desired tool and vents the tools as needed. Extensive testing of tooling operation was performed in the DWPF manipulator repair shop. This testing allowed the operators to gain confidence before the equipment was exposed to radioactive contamination. The testing also led to multiple design improvements. On July 17 and 29, 2008 the Remote Gasket Replacement Tooling was successfully demonstrated in the REDC at the DWPF of The Savannah River Site.

Krementz, D.; Coughlin, Jeffrey

2009-05-05T23:59:59.000Z

138

Remote Sensing ENGO 435 Introduction to Remote Sensing  

E-Print Network (OSTI)

1 Remote Sensing ENGO 435 Introduction to Remote Sensing Fall 2003 #12;2 Remote Sensing ENGO 435://www.geomatics.ucalgar.ca/~habib/courses.html #12;3 Remote Sensing ENGO 435 Grading Scheme · Lab Assignments (5 labs): (25% of Total Grade will be reduced by 10% per day for each day overdue. #12;4 Remote Sensing ENGO 435 Programming & Software

Habib, Ayman

139

T-673: Apple Safari Multiple Flaws Let Remote Users Execute Arbitrary Code,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3: Apple Safari Multiple Flaws Let Remote Users Execute 3: Apple Safari Multiple Flaws Let Remote Users Execute Arbitrary Code, Conduct Cross-Site Scripting Attacks T-673: Apple Safari Multiple Flaws Let Remote Users Execute Arbitrary Code, Conduct Cross-Site Scripting Attacks July 21, 2011 - 1:27am Addthis PROBLEM: Multiple vulnerabilities were reported in Apple Safari. A remote user can cause arbitrary code to be executed on the target user's system. A remote user can conduct cross-site scripting attacks. A remote user can obtain potentially sensitive information. A remote user can bypass a certificate validation control. PLATFORM: Safari 5.1 and Safari 5.0.6 Products Affected: Safari 5 (Mac OS X 10.6), Safari 5 (Mac OS X 10.5), Product Security, Safari 5.1 (OS X Lion) ABSTRACT: Apple Safari Multiple Flaws Let Remote Users Execute Arbitrary Code,

140

Remote reset circuit  

SciTech Connect

A remote reset circuit acts as a stand-alone monitor and controller by clocking in each character sent by a terminal to a computer and comparing it to a given reference character. When a match occurs, the remote reset circuit activates the system's hardware reset line. The remote reset circuit is hardware based centered around monostable multivibrators and is unaffected by system crashes, partial serial transmissions, or power supply transients.

Gritzo, Russell E. (West Melbourne, FL)

1987-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Remote reset circuit  

DOE Patents (OSTI)

A remote reset circuit acts as a stand-along monitor and controller by clocking in each character sent by a terminal to a computer and comparing it to a given reference character. When a match occurs, the remote reset circuit activates the system's hardware reset line. The remote reset circuit is hardware based centered around monostable multivibrators and is unaffected by system crashes, partial serial transmissions, or power supply transients. 4 figs.

Gritzo, R.E.

1985-09-12T23:59:59.000Z

142

Application of a computer model for predicting remote noise levels  

Science Conference Proceedings (OSTI)

The prediction of noise levels at selected remote locations is an integral part of estimating the environmental impact of new stationary sources or of noise reduction for existing facilities. A three?dimensional computermodel

S. H. Judd; S. L. Dryden

1975-01-01T23:59:59.000Z

143

Remote Sensing News  

Science Conference Proceedings (OSTI)

... Remote Sensing News. (showing 1 - 6 of 6). Photonic Thermometers Release Date: 11/28/2012 Click here for animation more. ...

2010-10-21T23:59:59.000Z

144

Remote Systems Design & Deployment  

Science Conference Proceedings (OSTI)

The Pacific Northwest National Laboratory (PNNL) was tasked by Washington River Protection Solutions, LLC (WRPS) to provide information and lessons learned relating to the design, development and deployment of remote systems, particularly remote arm/manipulator systems. This report reflects PNNLs experience with remote systems and lays out the most important activities that need to be completed to successfully design, build, deploy and operate remote systems in radioactive and chemically contaminated environments. It also contains lessons learned from PNNLs work experiences, and the work of others in the national laboratory complex.

Bailey, Sharon A.; Baker, Carl P.; Valdez, Patrick LJ

2009-08-28T23:59:59.000Z

145

REMOTE SENSING ACTIVITIES Caiti Steele  

E-Print Network (OSTI)

REMOTE SENSING ACTIVITIES Caiti Steele #12;REMOTE SENSING ACTIVITIES Remote sensing of biomass al., 2010) Remote sensing for mapping Ecological States: Spatially-Explicit Representation of State and Steele, in preparation) #12;REMOTE SENSING OF BIOMASS Can reflectance indices derived from Landsat

146

The development of a remote monitoring system for the Nuclear Science Center reactor  

E-Print Network (OSTI)

With funding provided by Nuclear Energy Research Initiative (NERI), design of Secure, Transportable, Autonomous Reactors (STAR) to aid countries with insufficient energy supplies is underway. The development of a new monitoring system that allows remote access to data from the reactor site is an important part of this project. The two goals of this monitoring system are to control the use of nuclear materials and to monitor the performance of the facility from a remote location. I have designed a prototype system for this NERI project that utilizes LabVIEW software and global network technologies to monitor the Nuclear Science Center (NSC) reactor at Texas A&M University. LabVIEW and its applications have all the needed features to build a monitoring system for many types of facilities, including STAR reactors. This system takes data from reactor cooling systems, power monitoring channels, fuel temperature indicators, control rod drives, security alarm sensors and stores it on local and remote hard drives, sends it through an output port to remote clients, and graphically displays these data in the reactor control room. Data from NSC TRIGA reactor is fed to a computer program that analyzes and predicts reactor performance in real time. To provide a remote observation of the working area and fissile material, this system uses cameras, triggered by alarm sensors and LabVIEW vision applications. Operators at the local and remote control stations may view and store all the images from these cameras. The system has been in operation for many months at the NSC with outstanding results and further development is continuing.

Jiltchenkov, Dmitri Victorovich

2002-01-01T23:59:59.000Z

147

Conceptual design for remote handling methods using the HIP process in the Calcine Immobilization Program  

SciTech Connect

This report recommends the remote conceptual design philosophy for calcine immobilization using the hot isostatic press (HIP) process. Areas of remote handling operations discussed in this report include: (1) introducing the process can into the front end of the HIP process, (2) filling and compacting the calcine/frit mixture into the process can, (3) evacuating and sealing the process can, (4) non-destructive testing of the seal on the process can, (5) decontamination of the process can, (6) HIP furnace loading and unloading the process can for the HIPing operation, (7) loading an overpack canister with processed HIP cans, (8) sealing the canister, with associated non-destructive examination (NDE) and decontamination, and (9) handling canisters for interim storage at the Idaho Chemical Processing Plant (ICPP) located on the Idaho National Engineering Laboratory (INEL) site.

Berry, S.M.; Cox, C.G.; Hoover, M.A.

1994-03-01T23:59:59.000Z

148

Remote Shopping Robot System for Fresh Foods Method of handling foods  

E-Print Network (OSTI)

Remote Shopping Robot System for Fresh Foods ­ Method of handling foods ­ Tetsuo TOMIZAWA, Akihisa a mobile manipulator as a teleoperated tool for accessing and manipulating remote objects. A human uses the system to select and buy fresh foods of a super market from a remote location via the Internet. We

Ohya, Akihisa

149

Development of Book Remote Browsing System Object Posture Recognition for Book Manipulation  

E-Print Network (OSTI)

/ , 21 Development of Book Remote Browsing System ­ Object Posture Recognition for Book remote objects. A human uses the system to browse a book of a library from a remote location via the Internet. We propose an efficient method of recognizing books of any posture and planning

Ohya, Akihisa

150

Method of determining forest production from remotely sensed forest parameters  

DOE Patents (OSTI)

A method of determining forest production entirely from remotely sensed data in which remotely sensed multispectral scanner (MSS) data on forest 5 composition is combined with remotely sensed radar imaging data on forest stand biophysical parameters to provide a measure of forest production. A high correlation has been found to exist between the remotely sensed radar imaging data and on site measurements of biophysical 10 parameters such as stand height, diameter at breast height, total tree height, mean area per tree, and timber stand volume.

Corey, J.C.; Mackey, H.E. Jr.

1987-08-31T23:59:59.000Z

151

U-093: Mozilla Firefox Multiple Flaws Permit Remote Code Execution,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3: Mozilla Firefox Multiple Flaws Permit Remote Code Execution, 3: Mozilla Firefox Multiple Flaws Permit Remote Code Execution, Information Disclosure, and Cross-Site Scripting Attacks U-093: Mozilla Firefox Multiple Flaws Permit Remote Code Execution, Information Disclosure, and Cross-Site Scripting Attacks February 1, 2012 - 5:51am Addthis PROBLEM: Multiple vulnerabilities were reported in Mozilla Firefox. PLATFORM: Linux (Any), UNIX (Any), Windows (Any) Version(s): prior to 3.2.26; prior to 10.0 ABSTRACT: Mozilla Firefox Multiple Flaws Permit Remote Code Execution, Information Disclosure, and Cross-Site Scripting. reference LINKS: SecurityTracker Alert ID: 1026605 CVE-2011-3659, CVE-2012-0442 CVE-2012-0443, CVE-2012-0444 CVE-2012-0445, CVE-2012-0446 CVE-2012-0447, CVE-2012-0449 CVE-2012-0450 Vendor Site IMPACT ASSESSMENT:

152

Forecasting for a Remote Island: A Class Exercise  

Science Conference Proceedings (OSTI)

Students enrolled in a satellite meteorology course at North Carolina State University, Raleigh, recently had an unusual opportunity to apply their forecast skills to predict wind and weather conditions for a remote site in the Southern ...

Allen J. Riordan

2003-06-01T23:59:59.000Z

153

Nevada National Security Site Environmental Report 2012 Attachment A: Site Description  

Science Conference Proceedings (OSTI)

This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2012 (National Security Technologies, LLC [NSTec], 2013). Included are subsections that summarize the sites geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the sites environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

Wills, Cathy A

2013-09-11T23:59:59.000Z

154

Test Cell Location  

NLE Websites -- All DOE Office Websites (Extended Search)

2012 Fiat 500 Test Cell Location 2WD Vehicle Setup Information Downloadable Dynamometer Database (D 3 )- Test Summary Sheet Vehicle Architecture Conventional Vehicle Dynamometer...

155

Test Cell Location  

NLE Websites -- All DOE Office Websites (Extended Search)

2013 Nissan Altima Test Cell Location 2WD Vehicle Setup Information Downloadable Dynamometer Database (D 3 )- Test Summary Sheet Vehicle Architecture Conventional Vehicle...

156

Test Cell Location  

NLE Websites -- All DOE Office Websites (Extended Search)

Focus Test Cell Location 2WD Vehicle Setup Information Downloadable Dynamometer Database (D 3 )- Test Summary Sheet Vehicle Architecture Conventional Vehicle Dynamometer Input...

157

Test Cell Location  

NLE Websites -- All DOE Office Websites (Extended Search)

Chrysler 300 Test Cell Location 2WD Vehicle Setup Information Downloadable Dynamometer Database (D 3 )- Test Summary Sheet Vehicle Architecture Conventional Vehicle Dynamometer...

158

Test Cell Location  

NLE Websites -- All DOE Office Websites (Extended Search)

Mazda 3 i-Stop Test Cell Location APRF- 4WD Vehicle Setup Information Downloadable Dynamometer Database (D 3 )- Test Summary Sheet Vehicle Architecture Conventional- Start Stop...

159

REMOTE SURVEILLANCE OF FACILITIES AWAITING D AND D  

DOE Green Energy (OSTI)

The purpose of this investigation is to compile the remote surveillance needs of different DOE facilities and to design and build a system that can measure the required parameters (such as radiation field, temperature, roof leakage), and transmit the data to a base location. The base station with its transceiver, computer, and software will receive, store, retrieve, and manipulate the data so that the values can be graphically represented and trends predicted. It is also important that the components should be commercially available, so that they can be configured into a user-friendly system. Since the measurements need to be performed over extended periods, mostly unattended, the components and system should be able to withstand adverse conditions, such as varying temperatures and relative humidities, and corrosive and radioactive atmospheres. The integrated system will be tested at Florida International University's Hemispheric Center for Environmental Technology (FIU-HCET) and at a DOE site. Based on these tests, and cost-benefit analysis, plans for deployment of the system will be made. The closed facilities may not have main power and telephone lines. An alternative method of solar-powering the system with storage batteries has been considered, which would be capable of supplying power to the system for a week in cloudy conditions. RF module and RF radio will be used for transmission of data to the remote station and receipt at the base station.

M.A. Ebadian, Ph.D.

1999-01-01T23:59:59.000Z

160

Facility location: distributed approximation  

Science Conference Proceedings (OSTI)

In this paper, we initiate the study of the approximability of the facility location problem in a distributed setting. In particular, we explore a trade-off between the amount of communication and the resulting approximation ratio. We give a distributed ... Keywords: distributed approximation, facility location, linear programming, primal-dual algorithms

Thomas Moscibroda; Rogert Wattenhofer

2005-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Strategic Environmental Research and Development Project FY 1994: Assessing national remote sensing technologies for use in US Department of Energy Environmental Restoration Activities, Oak Ridge Solid Waste Storage Area 4 case study  

SciTech Connect

During FY 1994, the Oak Ridge Environmental Restoration (ER) Remote Sensing Program teamed with members of the Oak Ridge National Security Program Office (NSPO), the Environmental Research Institute of Michigan (ERIM) under contract to the National Exploitation Laboratory (NEL), the Oak Ridge Waste Area Group 4 (WAG 4) ER Program, and the US Department of Energy (DOE), Offices of Technology Development, Nonproliferation and National Security, and Environmental Restoration, to conduct a test and demonstration of the uses of national remote sensing technologies at DOE hazardous waste sites located in Oak Ridge, Tennessee. Objectives of the Oak Ridge study were to determine if national remote sensing technologies are useful in conducting prescreening, characterization, and/or monitoring activities to expedite the clean-up process at hazardous waste sites and to cut clean-up costs wherever possible. This project was sponsored by the Strategic Environmental Research and Development Project (SERDP).

King, A.L.; Smyre, J.L.; Evers, T.K.

1995-02-01T23:59:59.000Z

162

DEVELOPMENT OF TECHNOLOGY TO REMOTELY NAVIGATE VERTICAL PIPE ARRAYS  

Science Conference Proceedings (OSTI)

Situations exist around the Savannah River Site (SRS) and the Department of Energy (DOE) complex where it is advantageous to remotely navigate vertical pipe arrays. Specific examples are waste tanks in the SRS Tank Farms, which contain horizontal cooling coils at the tank bottom, vertical cooling coils throughout and a limited number of access points or ''risers''. These factors limit accessibility to many parts of these tanks by conventional means. Pipe Traveler technology has been developed to address these issues. The Pipe Traveler addresses these issues by using the vertical cooling coils as its medium of travel. The unit operates by grabbing a pipe using dual grippers located on either side of the equipment. Once securely attached to the pipe a drive wheel is extended to come in contact with the pipe. Rotation of the drive wheel causes the unit to rotate around the pipe. This action is continued until the second set of grippers is aligned with the next pipe. Extension pistons are actuated to extend the second set of grippers in contact with a second pipe. The second set of grippers is then actuated to grasp the pipe. The first set of grippers releases the original pipe and the process is repeated until the unit reaches its desired location. Once at the tool deployment location the desired tool may be used. The current design has proven the concept of pipe-to-pipe navigation. Testing of the Pipe Traveler has proven its ability to transfer itself from one pipe to another.

Krementz, D.; Immel, D.; Vrettos, N.; Nance, T.; Marzolf, A.

2011-07-01T23:59:59.000Z

163

DOE - Office of Legacy Management -- Palmerton Ore Buying Site - PA 33  

NLE Websites -- All DOE Office Websites (Extended Search)

Palmerton Ore Buying Site - PA 33 Palmerton Ore Buying Site - PA 33 FUSRAP Considered Sites Site: PALMERTON ORE BUYING SITE (PA.33) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: New Jersey Zinc Company PA.33-1 Location: Palmerton , Pennsylvania PA.33-2 Evaluation Year: 1994 PA.33-3 Site Operations: Mid-1950s - AEC leased the New Jersey Zinc Company property and established a uranium ore stockpile on the property in the vicinity of Palmerton, PA. PA.33-4 Site Disposition: Eliminated - Potential for residual contamination and resulting exposure beyond that associated with natural background radiation considered remote PA.33-3 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium Ore PA.33-4 Radiological Survey(s): Yes PA.33-5

164

Nevada National Security Site Environmental Report 2010, Attachment A: Site Description  

Science Conference Proceedings (OSTI)

Introduction to the Nevada National Security Site Environmental Report 2010. Included are subsections that summarize the sites geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the sites environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

C. Wills, ed.

2011-09-13T23:59:59.000Z

165

Remote electrochemical sensor  

DOE Patents (OSTI)

An electrochemical sensor for remote detection, particularly useful for metal contaminants and organic or other compounds. The sensor circumvents technical difficulties that previously prevented in-situ remote operations. The microelectrode, connected to a long communications cable, allows convenient measurements of the element or compound at timed and frequent intervals and instrument/sample distances of ten feet to more than 100 feet. The sensor is useful for both downhole groundwater monitoring and in-situ water (e.g., shipboard seawater) analysis.

Wang, Joseph (Las Cruces, NM); Olsen, Khris (Richland, WA); Larson, David (Las Cruces, NM)

1997-01-01T23:59:59.000Z

166

Remote rendering using vtk and vic.  

Science Conference Proceedings (OSTI)

This paper presents a remote rendering application that involves the extension of the Visualization Toolkit (vtk) and the Video Conferencing Tool (vie) for use in remote rendering complete with interaction from the remote site using the vie user interface. Vtk is an open source C++ library, with Tel, Python, and Java bindings for computer graphics, image processing, and visualization [3]. Vtk provides a higher level of support, beyond the traditional low-level libraries, for creating visualization applications. Vtk includes algorithms to support the visualization of scalars, vectors, and tensors. Vic is a flexible tool built by Lawrence Berkeley National Laboratory for real-time video conferencing over the Internet [2]. Vie's user interface is built as Tcl/Tk script embedded in the applications. This allows developers to prototype changes to the interface in a simple and straightforward manner.

Olson, R.; Papka, M.E.

2000-09-19T23:59:59.000Z

167

T-573: Windows Remote Desktop Client DLL Loading Error Lets Remote...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

73: Windows Remote Desktop Client DLL Loading Error Lets Remote Users Execute Arbitrary Code T-573: Windows Remote Desktop Client DLL Loading Error Lets Remote Users Execute...

168

Entrance Maze Locations  

NLE Websites -- All DOE Office Websites (Extended Search)

Entrance Maze Locations Entrance Maze Locations for the Storage Ring Tunnel Martin Knott LS-83 2/17/87 The Purpose of this note is to document the locations and decision rationale of the entrance mazes for the APS storage ring. There are a total of seven entrance mazes, four on the infield side and three on the operating floor side of the ring. Three of the infield mazes are associated with infield buildings, one in the Extraction Building and one each in the two RF Buildings. These three were located to provide convenient passage between the technical buildings and the storage ring components associated with those buildings. The Extraction Building maze allows passage between the positron beam transfer area and the storage ring two sectors upstream of the injection

169

Magma Source Location Survey  

DOE Green Energy (OSTI)

A survey of Industry/University geophysicists was conducted to obtain their opinions on the existence of shallow (less than 10 km from surface) magma bodies in the western conterminous United States and methods for locating and defining them. Inputs from 35 individuals were received and are included. Responses were that shallow magma bodies exist and that existing geophysical sensing systems are adequate to locate them.

Hardee, H.C.; Dunn, J.C.; Colp, J.L.

1982-03-01T23:59:59.000Z

170

Alternative Carriers For Remote Renewable Energy Sources Using Existing Cng  

Open Energy Info (EERE)

Carriers For Remote Renewable Energy Sources Using Existing Cng Carriers For Remote Renewable Energy Sources Using Existing Cng Infrastructure Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Alternative Carriers For Remote Renewable Energy Sources Using Existing Cng Infrastructure Details Activities (0) Areas (0) Regions (0) Abstract: Optimal locations of renewable energy sources are often remote relative to consumers and electricity grids. In contrast, some existing CNG pipelines pass through optimal renewable energy harvesting regions. The growing interest in the possibility of using geothermal energy in central Australia has created a need to assess the economic, technical, and environmental viability of converting remote renewable energy to fuel for transport using existing CNG pipelines, and to compare this alternative

171

Blade Manufacturing Improvement: Remote Blade Manufacturing Demonstration  

DOE Green Energy (OSTI)

The objective of this program was to investigate manufacturing improvements for wind turbine blades. The program included a series of test activities to evaluate the strength, deflection, performance, and loading characteristics of the prototype blades. The original contract was extended in order to continue development of several key blade technologies identified in the project. The objective of the remote build task was to demonstrate the concept of manufacturing wind turbine blades at a temporary manufacturing facility in a rural environment. TPI Composites successfully completed a remote manufacturing demonstration in which four blades were fabricated. The remote demonstration used a manufacturing approach which relied upon material ''kits'' that were organized in the factory and shipped to the site. Manufacturing blades at the wind plant site presents serious logistics difficulties and does not appear to be the best approach. A better method appears to be regional manufacturing facilities, which will eliminate most of the transportation cost, without incurring the logistical problems associated with fabrication directly onsite. With this approach the remote facilities would use commonly available industrial infrastructure such as enclosed workbays, overhead cranes, and paved staging areas. Additional fatigue testing of the M20 root stud design was completed with good results. This design provides adhesive bond strength under fatigue loading that exceeds that of the fastener. A new thru-stud bonding concept was developed for the M30 stud design. This approach offers several manufacturing advantages; however, the test results were inconclusive.

ASHWILL, THOMAS D.

2003-05-01T23:59:59.000Z

172

Blade Manufacturing Improvement: Remote Blade Manufacturing Demonstration  

SciTech Connect

The objective of this program was to investigate manufacturing improvements for wind turbine blades. The program included a series of test activities to evaluate the strength, deflection, performance, and loading characteristics of the prototype blades. The original contract was extended in order to continue development of several key blade technologies identified in the project. The objective of the remote build task was to demonstrate the concept of manufacturing wind turbine blades at a temporary manufacturing facility in a rural environment. TPI Composites successfully completed a remote manufacturing demonstration in which four blades were fabricated. The remote demonstration used a manufacturing approach which relied upon material ''kits'' that were organized in the factory and shipped to the site. Manufacturing blades at the wind plant site presents serious logistics difficulties and does not appear to be the best approach. A better method appears to be regional manufacturing facilities, which will eliminate most of the transportation cost, without incurring the logistical problems associated with fabrication directly onsite. With this approach the remote facilities would use commonly available industrial infrastructure such as enclosed workbays, overhead cranes, and paved staging areas. Additional fatigue testing of the M20 root stud design was completed with good results. This design provides adhesive bond strength under fatigue loading that exceeds that of the fastener. A new thru-stud bonding concept was developed for the M30 stud design. This approach offers several manufacturing advantages; however, the test results were inconclusive.

ASHWILL, THOMAS D.

2003-05-01T23:59:59.000Z

173

Site descriptions of environmental restoration units at the Oak Ridge K-25 Site, Oak Ridge, Tennessee  

SciTech Connect

This report, Site Descriptions of Environmental Restoration Units at the Oak Ridge K-25 Site, Oak Ridge, Tennessee, is being prepared to assimilate information on sites included in the Environmental Restoration (ER) Program of the K-25 Site, one of three major installations on the Oak Ridge Reservation (ORR) built during World War III as part of the Manhattan Project. The information included in this report will be used to establish program priorities so that resources allotted to the K-25 ER Program can be best used to decrease any risk to humans or the environment, and to determine the sequence in which any remedial activities should be conducted. This document will be updated periodically in both paper and Internet versions. Units within this report are described in individual data sheets arranged alphanumerically. Each data sheet includes entries on project status, unit location, dimensions and capacity, dates operated, present function, lifecycle operation, waste characteristics, site status, media of concern, comments, and references. Each data sheet is accompanied by a photograph of the unit, and each unit is located on one of 13 area maps. These areas, along with the sub-area, unit, and sub-unit breakdowns within them, are outlined in Appendix A. Appendix B is a summary of information on remote aerial sensing and its applicability to the ER program.

Goddard, P.L.; Legeay, A.J.; Pesce, D.S.; Stanley, A.M.

1995-11-01T23:59:59.000Z

174

Ultra-wideband Location Authentication for Item Tracking  

SciTech Connect

International safeguards is increasingly utilizing unattended and remote monitoring methods to improve inspector efficiency and the timeliness of diversion detection. Item identification and tracking has been proposed as one unattended remote monitoring method, and a number of radio-frequency (RF) technologies have been proposed. When utilizing location information for verification purposes, strong assurance of the authenticity of the reported location is required, but most commercial RF systems are vulnerable to a variety of spoofing and relay attacks. ORNL has developed a distance bounding method that uses ultra-wideband technology to provide strong assurance of item location. This distance bounding approach can be coupled with strong symmetric key authentication methods to provide a fully authenticable tracking system that is resistant to both spoofing and relay attacks. This paper will discuss the overall problems associated with RF tracking including the common spoofing and relay attack scenarios, the ORNL distance bounding approach for authenticating location, and the potential applications for this technology.

Rowe, Nathan C [ORNL; Kuhn, Michael J [ORNL; Stinson, Brad J [ORNL; Holland, Stephen A [ORNL

2012-01-01T23:59:59.000Z

175

Pine Tree Growth Locations  

NLE Websites -- All DOE Office Websites (Extended Search)

Pine Tree Growth Locations Pine Tree Growth Locations Name: Amielee Location: N/A Country: N/A Date: N/A Question: Why do pine trees not grow south of the equator? Replies: Dear Amielee, The natural distribution of the pines is the northern hemisphere: http://phylogeny.arizona.edu/tree/eukaryotes/green_plants/embryophytes/conif ers/pinaceae/pinus/pinus.html However, pines have become introduced into the southern hemisphere through cultivation: http://www.woodweb.com/~treetalk/Radiata_Pine/wowhome.html Sincerely, Anthony R. Brach, Ph.D. Hi Amielee Some pine trees do live south of the equator but we (I live in Australia) do not have the huge forests of native conifers that you have in the northern hemisphere. Even in the northern hemisphere conifers are only found in two forest types: 1. Tiaga

176

location | OpenEI  

Open Energy Info (EERE)

location location Dataset Summary Description No description given. Source Oak Ridge National Laboratory Date Released November 30th, 2009 (5 years ago) Date Updated Unknown Keywords biodiesel ethanol location production capacity transportation Data application/zip icon Biorefineries.zip (zip, 7 MiB) Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage Frequency Time Period License License Other or unspecified, see optional comment below Comment Rate this dataset Usefulness of the metadata Average vote Your vote Usefulness of the dataset Average vote Your vote Ease of access Average vote Your vote Overall rating Average vote Your vote Comments Login or register to post comments If you rate this dataset, your published comment will include your rating.

177

Geobotanical Remote Sensing Applied To Targeting New Geothermal Resource  

Open Energy Info (EERE)

Geobotanical Remote Sensing Applied To Targeting New Geothermal Resource Geobotanical Remote Sensing Applied To Targeting New Geothermal Resource Locations In The Us Basin And Range With A Focus On Dixie Meadows, Nv Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Geobotanical Remote Sensing Applied To Targeting New Geothermal Resource Locations In The Us Basin And Range With A Focus On Dixie Meadows, Nv Details Activities (1) Areas (1) Regions (0) Abstract: This paper presents an overview of the work our collaboration is doing to increase the detailed mapped resource base for geothermal exploration in the Western US. We are imaging several large areas in the western US with high resolution airborne hyperspectral and satellite multispectral sensors. We have now entered the phase where the remote sensing techniques and tools we are developing are mature enough to be

178

TeleTorchlight: remote pointing and annotation using a mobile camera projector  

Science Conference Proceedings (OSTI)

Remote support for physical tasks often takes a longer time and involves more mistakes than on-site support. The reason for this is that it is difficult for remote supporters to know what happened at the site and show how to operate briefly. In this ... Keywords: augmented reality, camera, mobile, projector, telecollaboration, telecommunication

Genta Suzuki; Scott Klemmer

2012-09-01T23:59:59.000Z

179

Optimal fault location  

E-Print Network (OSTI)

Basic goal of power system is to continuously provide electrical energy to the users. Like with any other system, failures in power system can occur. In those situations it is critical that correct remedial actions are applied as soon as possible after the accurate fault condition and location are detected. This thesis has been focusing on automated fault location procedure. Different fault location algorithms, classified according to the spatial placement of physical measurements on single ended, multiple ended and sparse system-wide, are investigated. As outcome of this review, methods are listed as function of different parameters that influence their accuracy. This comparison is than used for generating procedure for optimal fault location algorithm selection. According to available data, and position of the fault with respect to the data, proposed procedure decides between different algorithms and selects an optimal one. A new approach is developed by utilizing different data structures such as binary tree and serialization in order to efficiently implement algorithm decision engine. After accuracy of algorithms is strongly influenced by available input data, different data sources are recommended in proposed architecture such as the digital fault recorders, circuit breaker monitoring, SCADA, power system model and etc. Algorithm for determining faulted section is proposed based on the data from circuit breaker monitoring devices. This algorithm works in real time by recognizing to which sequence of events newly obtained recording belongs. Software prototype of the proposed automated fault location analysis is developed using Java programming language. Fault location analysis is automatically triggered by appearance of new event files in a specific folder. The tests were carried out using the real life transmission system as an example.

Knezev, Maja

2007-12-01T23:59:59.000Z

180

Remote radiation dosimetry  

DOE Patents (OSTI)

Disclosed are methods and apparatus for remotely measuring radiation levels. Such are particularly useful for measuring relatively high levels or dosages of radiation being administered in radiation therapy. They are also useful for more general radiation level measurements where remote sensing from the remaining portions of the apparatus is desirable. The apparatus uses a beam generator, such as a laser beam, to provide a stimulating beam. The stimulating beam is preferably of wavelengths shorter than 6 microns, or more advantageously less than 2 microns. The stimulating beam is used to stimulate a remote luminescent sensor mounted in a probe which emits stored luminescent energy resulting from exposure of the sensor to ionizing radiation. The stimulating beam is communicated to the remote luminescent sensor via transmissive fiber which also preferably serves to return the emission from the luminescent sensor. The stimulating beam is advantageously split by a beam splitter to create a detector beam which is measured for power during a reading period during which the luminescent phosphor is read. The detected power is preferably used to control the beam generator to thus produce desired beam power during the reading period. The luminescent emission from the remote sensor is communicated to a suitable emission detector, preferably after filtering or other selective treatment to better isolate the luminescent emission.

Braunlich, Peter F. (Pullman, WA); Tetzlaff, Wolfgang (Pullman, WA); Hegland, Joel E. (Pullman, WA); Jones, Scott C. (Pullman, WA)

1991-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Remote radiation dosimetry  

DOE Patents (OSTI)

Disclosed are methods and apparatus for remotely measuring radiation levels. Such are particularly useful for measuring relatively high levels or dosages of radiation being administered in radiation therapy. They are also useful for more general radiation level measurements where remote sensing from the remaining portions of the apparatus is desirable. The apparatus uses a beam generator, such as a laser beam, to provide a stimulating beam. The stimulating beam is preferably of wavelengths shorter than 6 microns, or more advantageously less than 2 microns. The stimulating beam is used to stimulate a remote luminescent sensor mounted in a probe which emits stored luminescent energy resulting from exposure of the sensor to ionizing radiation. The stimulating beam is communicated to the remote luminescent sensor via a transmissive fiber which also preferably serves to return the emission from the luminescent sensor. The stimulating beam is advantageously split by a beam splitter to create a detector beam which is measured for power during a reading period during which the luminescent phosphor is read. The detected power is preferably used to control the beam generator to thus produce desired beam power during the reading period. The luminescent emission from the remote sensor is communicated to a suitable emission detector, preferably after filtering or other selective treatment to better isolate the luminescent emission. 8 figures.

Braunlich, P.F.; Tetzlaff, W.; Hegland, J.E.; Jones, S.C.

1991-03-12T23:59:59.000Z

182

Nevada National Security Site Environmental Report 2011 Attachment A: Site Description  

SciTech Connect

This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2011. Included are subsections that summarize the site's geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

Cathy Wills, ed.

2012-09-12T23:59:59.000Z

183

Report on 8-inch isostatic press explosion at Site 300  

SciTech Connect

On 3 March 1960 at 11:30 a.m. a detonation occurred in the 8-inch isostatic press. The press and building were completely destroyed. Operating personnel were protected and no injuries resulted. Adjacent facilities were not affected. The press was housed in a temporary facility located in the southwest portion of Section 26, Site 300. The facility was situated approximately 1000 feet west of the main site road, and 1400 feet north of the county road. The press building was of frangible wood construction and was surrounded by an earth barricade. A remote control building, provided with overhead protection, a mechanical equipment room, and a transportainer magazine were located outside the barricaded press building.

1960-04-06T23:59:59.000Z

184

Solid state laser media driven by remote nuclear powered fluorescence  

DOE Patents (OSTI)

An apparatus is provided for driving a solid state laser by a nuclear powered fluorescence source which is located remote from the fluorescence source. A nuclear reaction produced in a reaction chamber generates fluorescence or photons. The photons are collected from the chamber into a waveguide, such as a fiber optic waveguide. The waveguide transports the photons to the remote laser for exciting the laser.

Prelas, M.A.

1991-01-16T23:59:59.000Z

185

Solid state laser media driven by remote nuclear powered fluorescence  

DOE Patents (OSTI)

An apparatus is provided for driving a solid state laser by a nuclear powered fluorescence source which is located remote from the fluorescence source. A nuclear reaction produced in a reaction chamber generates fluorescence or photons. The photons are collected from the chamber into a waveguide, such as a fiber optic waveguide. The waveguide transports the photons to the remote laser for exciting the laser.

Prelas, Mark A. (Columbia, MO)

1992-01-01T23:59:59.000Z

186

Location-based communication services  

Science Conference Proceedings (OSTI)

Our demo shows end-user-oriented location-based services based on application-layer, human understandable location descriptions. Keywords: internet telephony, location-based services

Xiaotao Wu; Ron Shacham; Matthew J. Mintz-Habib; Kundan Singh; Henning Schulzrinne

2004-10-01T23:59:59.000Z

187

Our Locations | National Nuclear Security Administration  

NLE Websites -- All DOE Office Websites (Extended Search)

Locations | National Nuclear Security Administration Locations | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Our Locations Home > About Us > Our Locations Our Locations The NNSA's nuclear security enterprise spans eight sites, including three national laboratories, with more than six decades of cutting-edge nuclear security experience. That history and technical expertise enables NNSA to

188

Our Locations | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Locations | National Nuclear Security Administration Locations | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Our Locations Home > About Us > Our Locations Our Locations The NNSA's nuclear security enterprise spans eight sites, including three national laboratories, with more than six decades of cutting-edge nuclear security experience. That history and technical expertise enables NNSA to

189

Remote electrochemical sensor  

DOE Patents (OSTI)

An electrochemical sensor is described for remote detection, particularly useful for metal contaminants and organic or other compounds. The sensor circumvents technical difficulties that previously prevented in-situ remote operations. The microelectrode, connected to a long communications cable, allows convenient measurements of the element or compound at timed and frequent intervals and instrument/sample distances of ten feet to more than 100 feet. The sensor is useful for both downhole groundwater monitoring and in-situ water (e.g., shipboard seawater) analysis. 21 figs.

Wang, J.; Olsen, K.; Larson, D.

1997-10-14T23:59:59.000Z

190

Location of the Antarctic Polar Front from AMSR-E Satellite Sea Surface Temperature Measurements  

Science Conference Proceedings (OSTI)

The location of the Southern Ocean polar front (PF) is mapped from the first 3 yr of remotely sensed Advanced Microwave Scanning Radiometer for the Earth Observing System (AMSR-E) sea surface temperature (SST) measurements. In agreement with ...

Shenfu Dong; Janet Sprintall; Sarah T. Gille

2006-11-01T23:59:59.000Z

191

Electric current locator  

DOE Patents (OSTI)

The disclosure herein provides an apparatus for location of a quantity of current vectors in an electrical device, where the current vector has a known direction and a known relative magnitude to an input current supplied to the electrical device. Mathematical constants used in Biot-Savart superposition equations are determined for the electrical device, the orientation of the apparatus, and relative magnitude of the current vector and the input current, and the apparatus utilizes magnetic field sensors oriented to a sensing plane to provide current vector location based on the solution of the Biot-Savart superposition equations. Description of required orientations between the apparatus and the electrical device are disclosed and various methods of determining the mathematical constants are presented.

King, Paul E. (Corvallis, OR); Woodside, Charles Rigel (Corvallis, OR)

2012-02-07T23:59:59.000Z

192

Remote Sensing of Polar Regions  

Science Conference Proceedings (OSTI)

Polar researchers have historically been innovative and adaptive users of satellite remote sensing data, and their experiences can suggest ways to enhance the use of remote sensing throughout the climate sciences. We performed a semistructured ...

Dan Lubin; Gabrielle Ayres; Steven Hart

2009-06-01T23:59:59.000Z

193

Impact of Increasing Distributed Wind Power and Wind Turbine Siting on Rural Distribution Feeder Voltage Profiles: Preprint  

DOE Green Energy (OSTI)

Many favorable wind energy resources in North America are located in remote locations without direct access to the transmission grid. Building transmission lines to connect remotely-located wind power plants to large load centers has become a barrier to increasing wind power penetration in North America. By connecting utility-sized megawatt-scale wind turbines to the distribution system, wind power supplied to consumers could be increased greatly. However, the impact of including megawatt-scale wind turbines on distribution feeders needs to be studied. The work presented here examined the impact that siting and power output of megawatt-scale wind turbines have on distribution feeder voltage. This is the start of work to present a general guide to megawatt-scale wind turbine impact on the distribution feeder and finding the amount of wind power that can be added without adversely impacting the distribution feeder operation, reliability, and power quality.

Allen, A.; Zhang, Y. C.; Hodge, B. M.

2013-09-01T23:59:59.000Z

194

U-206: WordPress Flaws Permit Cross-Site Scripting, Cross-Site Request  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6: WordPress Flaws Permit Cross-Site Scripting, Cross-Site 6: WordPress Flaws Permit Cross-Site Scripting, Cross-Site Request Forgery, and Information Disclosure Attacks U-206: WordPress Flaws Permit Cross-Site Scripting, Cross-Site Request Forgery, and Information Disclosure Attacks July 6, 2012 - 7:00am Addthis PROBLEM: WordPress Flaws Permit Cross-Site Scripting, Cross-Site Request Forgery, and Information Disclosure Attacks PLATFORM: Version(s): prior to 3.4.1 ABSTRACT: Several vulnerabilities were reported in WordPress. A remote authenticated user can conduct cross-site scripting attacks. A remote user can conduct cross-site request forgery attacks. A remote authenticated user can obtain potentially sensitive information. reference LINKS: The Vendor's Advisory WordPress 3.4.1 Maintenance and Security Release SecurityTracker Alert ID: 1027219

195

4, 133, 2007 Remote sensing  

E-Print Network (OSTI)

HESSD 4, 1­33, 2007 Remote sensing approach to parsimonious streamflow modeling B. P. Weissling et System Sciences A multitemporal remote sensing approach to parsimonious streamflow modeling. P. Weissling (bweissling@swca.com) 1 #12;HESSD 4, 1­33, 2007 Remote sensing approach to parsimonious

Paris-Sud XI, Université de

196

Clean Cities: Coalition Locations  

NLE Websites -- All DOE Office Websites (Extended Search)

Locations Locations Clean Cities coalitions are primarily located in major metropolitan areas throughout the United States. Select the dots on the map for information about individual coalitions. See also the list of coalitions by designation date. United States map showing Clean Cities Coalition locations. Philadelphia State of Delaware Capitol Clean Cities of Connecticut Connecticut Southwestern Area New Haven Norwich Red River Valley (Grand Forks, Winnipeg, Manitoba, Canada) Silicon Valley (San Jose) East Bay (Oakland) San Francisco Sacramento Granite State State of Vermont Northeast Ohio Clean Transportation (Cleveland) Detroit Clean Communities of Western New York (Buffalo) Central New York (Syracuse) Capital District (Albany) Empire Clean Cities State of Maryland Washington DC Metropolitan South Shore Western Riverside County Southern California Association of Governments (SCAG) Atlanta Alabama Denver Philadelphia State of Delaware Las Vegas Washington DC Metropolitan Massachusetts Clean Cities Lone Star Clean Fuels Alliance (Austin) Southeast Florida Chicago Land of Enchantment Wisconsin-Southeast Area Southern Colorado Clean Cities Coalition Long Beach Antelope Valley Utah Clean Cities State of Maryland Kentucky Clean Cities Partnership Coalition Rogue Valley State of West Virginia San Joaquin Valley San Francisco Columbia-Willamette St. Louis Central New York (Syracuse) Dallas/Ft. Worth Honolulu Central Arkansas Pittsburgh Southern California Association of Governments (SCAG) Los Angeles Coachella Valley Region Northern Colorado Central Oklahoma (Oklahoma City) Virginia Clean Cities Coalition San Diego Regional Clean Cities Coalition Greater Long Island Maine Clean Communities Tulsa Valley of the Sun (Phoenix) Western Riverside County New Jersey Genesee Region (Rochester) Western Washington Clean Cities (Seattle) Ocean State Connecticut Connecticut2 Kansas City Regional Coalition Greater Indiana Clean Cities Coalition Capital District (Albany) Tucson Central Florida Clean Cities Coalition Alamo Area (San Antonio) Greater Baton Rouge Clean Cities Coalition Triangle (Raleigh, Durham, Chapel Hill) Twin Cities Clean Fuels Ohio Yellowstone-Teton Clean Energy Coalition Greater Lansing Palmetto State Houston-Galveston Middle Tennessee East Tennessee Clean Fuels Coalition Centralina Clean Fuels Coalition State of Iowa Treasure Valley Central Coast Southeast Louisiana Clean Fuels Partnership Land of Sky Coalition

197

Clean Cities: Coalition Locations  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Locations Locations Clean Cities coalitions are primarily located in major metropolitan areas throughout the United States. Select the dots on the map for information about individual coalitions. See also the list of coalitions by designation date. United States map showing Clean Cities Coalition locations. Philadelphia State of Delaware Capitol Clean Cities of Connecticut Connecticut Southwestern Area New Haven Norwich Red River Valley (Grand Forks, Winnipeg, Manitoba, Canada) Silicon Valley (San Jose) East Bay (Oakland) San Francisco Sacramento Granite State State of Vermont Northeast Ohio Clean Transportation (Cleveland) Detroit Clean Communities of Western New York (Buffalo) Central New York (Syracuse) Capital District (Albany) Empire Clean Cities State of Maryland Washington DC Metropolitan South Shore Western Riverside County Southern California Association of Governments (SCAG) Atlanta Alabama Denver Philadelphia State of Delaware Las Vegas Washington DC Metropolitan Massachusetts Clean Cities Lone Star Clean Fuels Alliance (Austin) Southeast Florida Chicago Land of Enchantment Wisconsin-Southeast Area Southern Colorado Clean Cities Coalition Long Beach Antelope Valley Utah Clean Cities State of Maryland Kentucky Clean Cities Partnership Coalition Rogue Valley State of West Virginia San Joaquin Valley San Francisco Columbia-Willamette St. Louis Central New York (Syracuse) Dallas/Ft. Worth Honolulu Central Arkansas Pittsburgh Southern California Association of Governments (SCAG) Los Angeles Coachella Valley Region Northern Colorado Central Oklahoma (Oklahoma City) Virginia Clean Cities Coalition San Diego Regional Clean Cities Coalition Greater Long Island Maine Clean Communities Tulsa Valley of the Sun (Phoenix) Western Riverside County New Jersey Genesee Region (Rochester) Western Washington Clean Cities (Seattle) Ocean State Connecticut Connecticut2 Kansas City Regional Coalition Greater Indiana Clean Cities Coalition Capital District (Albany) Tucson Central Florida Clean Cities Coalition Alamo Area (San Antonio) Greater Baton Rouge Clean Cities Coalition Triangle (Raleigh, Durham, Chapel Hill) Twin Cities Clean Fuels Ohio Yellowstone-Teton Clean Energy Coalition Greater Lansing Palmetto State Houston-Galveston Middle Tennessee East Tennessee Clean Fuels Coalition Centralina Clean Fuels Coalition State of Iowa Treasure Valley Central Coast Southeast Louisiana Clean Fuels Partnership Land of Sky Coalition

198

METHOD OF LOCATING GROUNDS  

DOE Patents (OSTI)

ABS>This patent presents a method for locating a ground in a d-c circult having a number of parallel branches connected across a d-c source or generator. The complete method comprises the steps of locating the ground with reference to the mildpoint of the parallel branches by connecting a potentiometer across the terminals of the circuit and connecting the slider of the potentiometer to ground through a current indicating instrument, adjusting the slider to right or left of the mildpoint so as to cause the instrument to indicate zero, connecting the terminal of the network which is farthest from the ground as thus indicated by the potentiometer to ground through a condenser, impressing a ripple voltage on the circuit, and then measuring the ripple voltage at the midpoint of each parallel branch to find the branch in which is the lowest value of ripple voltage, and then measuring the distribution of the ripple voltage along this branch to determine the point at which the ripple voltage drops off to zero or substantially zero due to the existence of a ground. The invention has particular application where a circuit ground is present which will disappear if the normal circuit voltage is removed.

Macleish, K.G.

1958-02-11T23:59:59.000Z

199

Remote Sensing Ayman F. Habib Introduction  

E-Print Network (OSTI)

Remote Sensing Ayman F. Habib 1 Chapter 1 Introduction #12;Remote Sensing Ayman F. Habib 2 Overview · Remote sensing: definition. · Remote sensing versus photogrammetry. · Elements of remote sensing. · Key;Remote Sensing Ayman F. Habib 3 Overview · Acquisition platforms: ­ Historical overview. ­ Terrestrial

Habib, Ayman

200

Multi-site magnetotelluric measurement system with real-time data analysis. Final technical report No. 210  

DOE Green Energy (OSTI)

A magnetotelluric measurement system has been designed to provide a more cost effective electrical method for geothermal and mineral exploration. The theoretical requirements and sensitivities of the magnetotelluric inversion process were specifically addressed in determining system performance requirements. Significantly reduced instrument noise levels provide improved data quality, and simultaneous measurement at up to six locations provides reduced cost per site. Remotely located, battery powered, instrumentation packages return data to a central controlling site through a 2560 baud wire-line or radio link. Each remote package contains preamplifiers, data conditioning filters, and a 12-bit gain ranging A-D converter for frequencies from 0.001 Hz to 8 Hz. Data frequencies above 8 Hz are processed sequentially by a heterodyne receiver to reduce bandwidth to within the limits of the 2560 baud data link. The central data collection site provides overall control for the entire system. The system operator interacts with the system through a CRT terminal, and he receives hard copy from a matrix graphics printer. Data from the remote packages may be recorded in time sequence on a magnetic tape cartridge system, or an optional Hewlett-Packard 21MX minicomputer can be used to perform real-time frequency analysis. The results of this analysis provide feedback to the operator for improved evaluation of system performance and for selection of future measurement sites.

Becker, J.D.; Bostick, F.X. Jr.; Smith, H.W.

1981-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Test Cell Location  

NLE Websites -- All DOE Office Websites (Extended Search)

Mazda 3 i-Stop Mazda 3 i-Stop Test Cell Location APRF- 4WD Vehicle Setup Information Downloadable Dynamometer Database (D 3 )- Test Summary Sheet Vehicle Architecture Conventional- Start Stop Vehicle Dynamometer Input Document Date 11/20/2012 Advanced Powertrain Research Facility Test weight [lb] 3250 Vehicle Dynamometer Input Document Date 11/20/2012 Revision Number 1 Advanced Powertrain Research Facility Test weight [lb] Target A [lb] 3250 31.2 Target B [lb/mph] Target C [lb/mph^2] 0.462 0.014 Test Fuel Information - Vehicle equipped with with i-Stop package - Manual Transmission - All tests completed in ECO mode - EPA shift schedule modified based on vehicle shift light activity Revision Number 1 Notes: Fuel type EPA Tier II EEE Gasoline Test Fuel Information - Vehicle equipped with with i-Stop package

202

Portsmouth X300 remote assay monitor system  

SciTech Connect

Personnel in the Instrumentation and Controls Division at Oak Ridge National Laboratory (ORNL) in association with the United States Enrichment Corporation (USEC) have recently developed a system for monitoring and tracking the assay of enriched uranium from the production facilities at the Portsmouth Gaseous Diffusion Plant (PORTS). This work was sponsored by the USEC and has involved the expansion and improvement of an existing system that was developed by ORNL. The system provides control room operators with real-time information on the withdrawal operations of uranium hexafluoride at the withdrawal stations at PORTS. An additional system was developed to display the real-time information from each of the three withdrawal stations at a remotely located building. This report describes the remote assay monitor and display system that has been developed and installed at PORTS Building X300.

Smith, D.E.

1996-07-01T23:59:59.000Z

203

Remote repair appliance  

DOE Patents (OSTI)

A remote appliance for supporting a tool for performing work at a worksite on a substantially circular bore of a workpiece and for providing video signals of the worksite to a remote monitor comprising: a baseplate having an inner face and an outer face; a plurality of rollers, wherein each roller is rotatably and adjustably attached to the inner face of the baseplate and positioned to roll against the bore of the workpiece when the baseplate is positioned against the mouth of the bore such that the appliance may be rotated about the bore in a plane substantially parallel to the baseplate; a tool holding means for supporting the tool, the tool holding means being adjustably attached to the outer face of the baseplate such that the working end of the tool is positioned on the inner face side of the baseplate; a camera for providing video signals of the worksite to the remote monitor; and a camera holding means for supporting the camera on the inner face side of the baseplate, the camera holding means being adjustably attached to the outer face of the baseplate. In a preferred embodiment, roller guards are provided to protect the rollers from debris and a bore guard is provided to protect the bore from wear by the rollers and damage from debris.

Heumann, Frederick K. (Ballston Spa, NY); Wilkinson, Jay C. (Ballston Spa, NY); Wooding, David R. (Saratoga Springs, NY)

1997-01-01T23:59:59.000Z

204

Remote repair appliance  

DOE Patents (OSTI)

A remote appliance is described for supporting a tool for performing work at a worksite on a substantially circular bore of a workpiece and for providing video signals of the worksite to a remote monitor comprising: a baseplate having an inner face and an outer face; a plurality of rollers, wherein each roller is rotatably and adjustably attached to the inner face of the baseplate and positioned to roll against the bore of the workpiece when the baseplate is positioned against the mouth of the bore such that the appliance may be rotated about the bore in a plane substantially parallel to the baseplate; a tool holding means for supporting the tool, the tool holding means being adjustably attached to the outer face of the baseplate such that the working end of the tool is positioned on the inner face side of the baseplate; a camera for providing video signals of the worksite to the remote monitor; and a camera holding means for supporting the camera on the inner face side of the baseplate, the camera holding means being adjustably attached to the outer face of the baseplate. In a preferred embodiment, roller guards are provided to protect the rollers from debris and a bore guard is provided to protect the bore from wear by the rollers and damage from debris.

Heumann, F.K.; Wilkinson, J.C.; Wooding, D.R.

1996-12-31T23:59:59.000Z

205

Researcher, Los Alamos National Laboratory - Space and Remote Sensing Group  

National Nuclear Security Administration (NNSA)

and Remote Sensing Group and Remote Sensing Group | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > About Us > Who We Are > In The Spotlight > Patrick Colestock Researcher, Los Alamos National Laboratory - Space and Remote Sensing Group Patrick Colestock Patrick Colestock Role: Researcher, Los Alamos National Laboratory - Space and Remote Sensing

206

Researcher, Los Alamos National Laboratory - Space and Remote Sensing Group  

NLE Websites -- All DOE Office Websites (Extended Search)

and Remote Sensing Group and Remote Sensing Group | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > About Us > Who We Are > In The Spotlight > Patrick Colestock Researcher, Los Alamos National Laboratory - Space and Remote Sensing Group Patrick Colestock Patrick Colestock Role: Researcher, Los Alamos National Laboratory - Space and Remote Sensing

207

U-184: Mozilla Firefox Multiple Bugs Let Remote Users Execute Arbitrary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U-184: Mozilla Firefox Multiple Bugs Let Remote Users Execute U-184: Mozilla Firefox Multiple Bugs Let Remote Users Execute Arbitrary Code U-184: Mozilla Firefox Multiple Bugs Let Remote Users Execute Arbitrary Code June 6, 2012 - 7:00am Addthis PROBLEM: Multiple vulnerabilities were reported in Mozilla Firefox. PLATFORM: Version(s): prior to 13.0 ABSTRACT: A remote user can cause arbitrary code to be executed on the target user's system. A remote user can conduct cross-site scripting attacks. A remote user can obtain potentially sensitive information. Reference Links: Security Tracker ID 1027120 CVE-2012-0441,CVE-2012-1937 Vendor URL IMPACT ASSESSMENT: High Discussion: A remote user can create specially crafted content that, when loaded by the target user, will trigger a memory corruption error and execute arbitrary code on the target system [CVE-2012-1937 , CVE-2012-1938, CVE-2012-1939 ].

208

Development of Book Remote Browsing Robot System Tetsuo Tomizawa, Akihisa Ohya, Shin'ichi Yuta (University of Tsukuba)  

E-Print Network (OSTI)

/ , 21 Development of Book Remote Browsing Robot System Tetsuo Tomizawa, Akihisa Ohya, Shin browse books located in a library from a remote location via the Internet. This task was decomposed into three major parts which are, the extraction and return of a book from a bookshelf, its perusal

Ohya, Akihisa

209

SITE ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT  

Science Conference Proceedings (OSTI)

The Site Electrical Power System receives and distributes utility power to all North Portal site users. The major North Portal users are the Protected Area including the subsurface facility and Balance of Plant areas. The system is remotely monitored and controlled from the Surface Operations Monitoring and Control System. The system monitors power quality and provides the capability to transfer between Off-Site Utility and standby power (including dedicated safeguards and security power). Standby power is only distributed to selected loads for personnel safety and essential operations. Security power is only distributed to essential security operations. The standby safeguards and security power is independent from all other site power. The system also provides surface lighting, grounding grid, and lightning protection for the North Portal. The system distributes power during construction, operation, caretaker, and closure phases of the repository. The system consists of substation equipment (disconnect switches, breakers, transformers and grounding equipment) and power distribution cabling from substation to the north portal switch gear building. Additionally, the system includes subsurface facility substation (located on surface), switch-gear, standby diesel generators, underground duct banks, power cables and conduits, switch-gear building and associated distribution equipment for power distribution. Each area substation distributes power to the electrical loads and includes the site grounding, site lighting and lightning protection equipment. The site electrical power system distributes power of sufficient quantity and quality to meet users demands. The Site Electrical Power System interfaces with the North Portal surface systems requiring electrical power. The system interfaces with the Subsurface Electrical Distribution System which will supply power to the underground facilities from the North Portal. Power required for the South Portal and development side activities of the subsurface facility will be provided at the South Portal by the Subsurface Electrical Distribution System. The Site Electrical Power System interfaces with the Off-Site Utility System for the receipt of power. The System interfaces with the Surface Operations Monitoring and Control System for monitoring and control. The System interfaces with MGR Site Layout System for the physical location of equipment and power distribution.

E.P. McCann

1999-04-16T23:59:59.000Z

210

Remote-Handled Transuranic Content Codes  

SciTech Connect

Each content code uniquely identifies the generated waste and provides a system for tracking theprocess and packaging history. Each content code begins with a two-letter site abbreviation thatdesignates the physical location of the RH-TRU waste. The site-specific letter designations for eachof the DOE sites are provided in Table 2. All TRU waste generating/storage sites are included inTable 2 for completeness. Not all of the sites listed in Table 2 have generated/stored RH-TRU waste.

Washington TRU Solutions

2000-11-01T23:59:59.000Z

211

REMOTE RADIOLOGICAL MONITORING  

SciTech Connect

A gamma-radiation telemetering system was utilized to measure fall-out levels at the Ncvada Test Site. Two methods of signal transmission were used: directcoupled field lines for on-site installations and commercial telephone lines for areas out to 330 miles. Graphic and tabular data cover on-site and off- site residual gamma-radiation dose rate measurements taken as a function of time after selected events. (auth)

Sigoloff, S.C.; Borella, H.M.

1958-11-01T23:59:59.000Z

212

FoneAstra: Enabling Remote Monitoring of Vaccine Cold-Chains Using Commodity Mobile Phones  

E-Print Network (OSTI)

FoneAstra: Enabling Remote Monitoring of Vaccine Cold-Chains Using Commodity Mobile Phones Rohit-cost, energy-efficient system to remotely monitor the temperature and location of vaccines in a country- wide-tracking of vaccines in transit, based on the mobile phone's cell tower-IDs. We present results from an ongoing lab

Anderson, Richard

213

Test Cell Location  

NLE Websites -- All DOE Office Websites (Extended Search)

Chrysler 300 Chrysler 300 Test Cell Location 2WD Vehicle Setup Information Downloadable Dynamometer Database (D 3 )- Test Summary Sheet Vehicle Architecture Conventional Vehicle Dynamometer Input Document Date 8/7/2013 Advanced Powertrain Research Facility Test weight [lb] Target A [lb] 4250 38.61 Target B [lb/mph] Target C [lb/mph^2] 0.8894 0.01105 3.6L VVT Port-injected V-6 8 speed Transmission Revision Number 3 Notes: Test Fuel Information 3.6L VVT Port-injected V-6 8 speed Transmission Fuel type Tier II EEE HF437 3.6L VVT Port-injected V-6 8 speed Transmission Fuel density [g/ml] Fuel Net HV [BTU/lbm] 0.743 18490 T e s t I D [ # ] C y c l e C o l d s t a r t ( C S t ) H o t s t a r t [ H S t ] D a t e T e s t C e l l T e m p [ C ] T e s t C e l l R H [ % ] T e s t C e l l B a r o [ i n / H g ] V e h i c l e c o o l i n g f a n s p e e d : S p e e d M a t c h [ S M ] o r c o n s t a n t s p e e d [ C S ] S

214

EA-1793: Replacement Capability for Disposal of Remote-handled Low-level  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

793: Replacement Capability for Disposal of Remote-handled 793: Replacement Capability for Disposal of Remote-handled Low-level Waste Generated at the Department of Energy's Idaho Site EA-1793: Replacement Capability for Disposal of Remote-handled Low-level Waste Generated at the Department of Energy's Idaho Site Summary This EA evaluates the environmental impacts of replacement capability for disposal of remote-handled low-level radioactive waste (LLW) generated at the Idaho National Laboratory (INL) site beginning in October 2017. Public Comment Opportunities Submit Comments to: Mr. Chuck Ljungberg 1955 Fremont Avenue, Mailstop 1216 Idaho Falls, ID 83415 Electronic mail: rhllwea@id.doe.gov Documents Available for Download December 21, 2011 EA-1793: Finding of No Significant Impact Replacement Capability for Disposal of Remote-Handled Low-Level Radioactive

215

V-171: Apple Safari Bugs Let Remote Users Execute Arbitrary Code and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1: Apple Safari Bugs Let Remote Users Execute Arbitrary Code 1: Apple Safari Bugs Let Remote Users Execute Arbitrary Code and Conduct Cross-Site Scripting Attacks V-171: Apple Safari Bugs Let Remote Users Execute Arbitrary Code and Conduct Cross-Site Scripting Attacks June 5, 2013 - 1:05am Addthis PROBLEM: Apple Safari Bugs Let Remote Users Execute Arbitrary Code and Conduct Cross-Site Scripting Attacks PLATFORM: Apple Safari prior to 6.0.5 ABSTRACT: Several vulnerabilities were reported in Apple Safari. REFERENCE LINKS: Apple Article: HT5785 SecurityTracker Alert ID: 1028627 CVE-2013-0926 CVE-2013-1009 CVE-2013-1012 CVE-2013-1013 CVE-2013-1023 IMPACT ASSESSMENT: Medium DISCUSSION: A remote user can create specially crafted HTML that, when loaded by the target user, will trigger a memory corruption error and execute arbitrary

216

ColumbusSites.cdr  

Office of Legacy Management (LM)

Columbus, Ohio, Sites consist of two geographically Columbus, Ohio, Sites consist of two geographically separate properties owned by the Battelle Memorial Institute: the King Avenue site, located in the city of Columbus, and the West Jefferson site, located approx- imately 15 miles west of Columbus. Battelle conducted extensive nuclear research at both locations for the U.S. Department of Energy (DOE) and its predecessor agencies between 1943 and 1986. The research resulted in contamination of soil, buildings, and equipment with radioactive and mixed waste materials. Environmental cleanup of the sites began in 1986. The 6-acre King Avenue site, which was historically a part of the federal government's fuel and target fab- rication program, consisted of 9 buildings and the surrounding grounds. Nuclear research conducted at the

217

Remote Desktop | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Remote Desktop Remote Desktop Using Remote Desktop to Connect to Your Work Computer With Remote Desktop, you can have access to a computer at the Laboratory through another computer. For example, you can connect to your work computer from home and have access to all of your programs, files, and network resources as though you were sitting at your computer at work. You can leave programs running at work and see your work desktop displayed on your home computer, with the same programs running. Remote Desktop can be used in many situations, including: Working at home. Access work in progress on your office computer from home and have full access to all local and remote devices. Collaborating. Access your desktop from a colleague's office to work together on projects, such as updating a slide presentation or proofreading

218

REMOTE CONTROLLED SWITCHING DEVICE  

DOE Patents (OSTI)

An electrical switching device which can be remotely controlled and in which one or more switches may be accurately operated at predetermined times or with predetermined intervening time intervals is described. The switching device consists essentially of a deck, a post projecting from the deck at right angles thereto, cam means mounted for rotation around said posts and a switch connected to said deck and actuated by said cam means. Means is provided for rotating the cam means at a constant speed and the switching apparatus is enclosed in a sealed container with external adjusting means and electrical connection elements.

Hobbs, J.C.

1959-02-01T23:59:59.000Z

219

Remote Sensing R. E. Mcintosh  

NLE Websites -- All DOE Office Websites (Extended Search)

participate in an intensive operation period (lOP) planned for June 1993. The Microwave Remote Sensing Laboratory (MIRSL) is developing a mobile, scanning millimeter-wave radar...

220

Characteristics of transuranic waste at Department of Energy sites  

SciTech Connect

This document reports data and information on TRU waste from all DOE generating and storage sites. The geographical location of the sites is shown graphically. There are four major sections in this document. The first three cover the TRU waste groups known as Newly Generated, Stored, and Buried Wastes. Subsections are included under Newly Generated and Stored on contact-handled and remote-handled waste. These classifications of waste are defined, and the current or expected totals of each are given. Figure 1.3 shows the total amount of Buried and Stored TRU waste. Preparation of this document began in 1981, and most of the data are as of December 31, 1980. In a few cases data were reported to December 31, 1981, and these have been noted. The projections in the Newly Generated section were made, for the most part, at the end of 1981.

Jensen, R.T.; Wilkinson, F.J. III

1983-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Location-based services to control roller compaction quality for rock-fill dams  

Science Conference Proceedings (OSTI)

It is very important for rock-fill dams to carry out more accurately monitoring and remotely quality controlling in real time. Based on location based services, an integration platform, with the name of CRCQ-DAM, is proposed to control roller compaction ... Keywords: RTK, WebGIS, location-based services, rock-fill dams, roller compaction quality

Hao Wu; Qiankun Wang; Jiru Zhang; Qin Chen; Xupeng Wang

2009-09-01T23:59:59.000Z

222

Siting the International Linear Collider at Hanford  

SciTech Connect

Review of the proposed International Linear Collider, applications in high energy physics, and evaluation of the Hanford Site as a possible location for siting the facilityl.

Kouzes, Richard T.; Asner, David M.; Brodzinski, Ronald L.; Fast, James E.; Miley, Harry S.

2012-03-15T23:59:59.000Z

223

Siting the International Linear Collider at Hanford  

SciTech Connect

Review of the proposed International Linear Collider, applications in high energy physics, and evaluation of the Hanford Site as a possible location for siting the facility.

Kouzes, Richard T.; Asner, David M.; Brodzinski, Ronald L.; Fast, James E.; Miley, Harry S.

2012-05-01T23:59:59.000Z

224

Moss Web Sites  

NLE Websites -- All DOE Office Websites (Extended Search)

Moss Web Sites Name: Barbara Location: NA Country: NA Date: NA Question: I would like some on-line information about using various mosses in gardens - or pointers to other...

225

Matador Site Image #1  

NLE Websites -- All DOE Office Websites (Extended Search)

MTD-1: Field work in progress at the Matador grassland site, Saskatchewan, Canada. (The sample plots were located between 1.0 and 2.4 km from this point, on flat topography....

226

Hyperspectral remote sensing analysis of short rotation woody crops grown with controlled nutrient and irrigation treatments.  

SciTech Connect

Abstract - Hyperspectral remote sensing research was conducted to document the biophysical and biochemical characteristics of controlled forest plots subjected to various nutrient and irrigation treatments. The experimental plots were located on the Savannah River Site near Aiken, SC. AISA hyperspectral imagery were analysed using three approaches, including: (1) normalized difference vegetation index based simple linear regression (NSLR), (2) partial least squares regression (PLSR) and (3) machine-learning regression trees (MLRT) to predict the biophysical and biochemical characteristics of the crops (leaf area index, stem biomass and five leaf nutrients concentrations). The calibration and cross-validation results were compared between the three techniques. The PLSR approach generally resulted in good predictive performance. The MLRT approach appeared to be a useful method to predict characteristics in a complex environment (i.e. many tree species and numerous fertilization and/or irrigation treatments) due to its powerful adaptability.

Im, Jungho; Jensen, John R.; Coleman, Mark; Nelson, Eric

2009-04-01T23:59:59.000Z

227

Remote Sensing of Irrigated Agriculture: Opportunities and Challenges  

E-Print Network (OSTI)

Abstract: Over the last several decades, remote sensing has emerged as an effective tool to monitor irrigated lands over a variety of climatic conditions and locations. The objective of this review, which summarizes the methods and the results of existing remote sensing studies, is to synthesize principle findings and assess the state of the art. We take a taxonomic approach to group studies based on location, scale, inputs, and methods, in an effort to categorize different approaches within a logical framework. We seek to evaluate the ability of remote sensing to provide synoptic and timely coverage of irrigated lands in several spectral regions. We also investigate the value of archived data that enable comparison of images through time. This overview of the studies to date indicates that remote sensing-based monitoring of irrigation is at an intermediate stage of development at local scales. For instance, there is overwhelming consensus on the efficacy of vegetation indices in identifying irrigated fields. Also, single date imagery, acquired at peak growing season, may suffice to identify irrigated lands, although to multi-date image data are necessary for improved classification and to distinguish different crop types. At local scales, the mapping of irrigated lands with remote sensing is also strongly affected by the

Mutlu Ozdogan; Yang Yang; George Allez; Chelsea Cervantes

2010-01-01T23:59:59.000Z

228

Remote multi-position information gathering system and method  

DOE Patents (OSTI)

A technique for gathering specific information from various remote locations, especially fluorimetric information characteristic of particular materials at the various locations is disclosed herein. This technique uses a single source of light disposed at still a different, central location and an overall optical network including an arrangement of optical fibers cooperating with the light source for directing individual light beams into the different information bearing locations. The incoming light beams result in corresponding displays of light, e.g., fluorescent light, containing the information to be obtained. The optical network cooperates with these light displays at the various locations for directing outgoing light beams containing the same information as their cooperating displays from these locations to the central location. Each of these outgoing beams is applied to a detection arrangement, e.g., a fluorescence spectroscope, for retrieving the information contained thereby. 9 figs.

Hirschfeld, T.B.

1989-01-24T23:59:59.000Z

229

Remote multi-position information gathering system and method  

DOE Patents (OSTI)

A technique for gathering specific information from various remote locations, especially fluorimetric information characteristic of particular materials at the various locations is disclosed herein. This technique uses a single source of light disposed at still a different, central location and an overall optical network including an arrangement of optical fibers cooperating with the light source for directing individual light beams into the different information bearing locations. The incoming light beams result in corresponding displays of light, e.g., fluorescent light, containing the information to be obtained. The optical network cooperates with these light displays at the various locations for directing outgoing light beams containing the same information as their cooperating displays from these locations to the central location. Each of these outgoing beams is applied to a detection arrangement, e.g., a fluorescence spectroscope, for retrieving the information contained thereby.

Hirschfeld, Tomas B. (Livermore, CA)

1989-01-01T23:59:59.000Z

230

Remote multi-position information gathering system and method  

DOE Patents (OSTI)

A technique for gathering specific information from various remote locations, especially fluorimetric information characteristic of particular materials at the various locations is disclosed herein. This technique uses a single source of light disposed at still a different, central location and an overall optical network including an arrangement of optical fibers cooperating with the light source for directing individual light beams into the different information bearing locations. The incoming light beams result in corresponding displays of light, e.g., fluorescent light, containing the information to be obtained. The optical network cooperates with these light displays at the various locations for directing outgoing light beams containing the same information as their cooperating displays from these locations to the central location. Each of these outgoing beams is applied to a detection arrangement, e.g., a fluorescence spectroscope, for retrieving the information contained thereby.

Hirschfeld, Tomas B. (Livermore, CA)

1986-01-01T23:59:59.000Z

231

Remote multi-position information gathering system and method  

DOE Patents (OSTI)

A technique for gathering specific information from various remote locations, especially fluorimetric information characteristic of particular materials at the various locations is disclosed herein. This technique uses a single source of light disposed at still a different, central location and an overall optical network including an arrangement of optical fibers cooperating with the light source for directing individual light beams into the different information bearing locations. The incoming light beams result in corresponding displays of light, e.g., fluorescent light, containing the information to be obtained. The optical network cooperates with these light displays at the various locations for directing ongoing light beams containing the same information as their cooperating displays from these locations to the central location. Each of these outgoing beams is applied to a detection arrangement, e.g., a fluorescence spectroscope, for retrieving the information contained thereby.

Hirschfeld, Tomas B. (Livermore, CA)

1986-01-01T23:59:59.000Z

232

Remote Sensing: A New Tool For Automobile  

E-Print Network (OSTI)

Remote Sensing. Recent breakthroughs in manufacturing low- emitting vehicles and in remote sensing of a moving car-style testing centers. Remote sensing technology now allows a piece of equipment small enough to fit in a van

Denver, University of

233

U-222: Apple Safari Bugs Let Remote Users Execute Arbitrary Code...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

input elements may be autocompleted even if the site specifies that autocomplete be disabled CVE-2012-0680. A remote user can create specially crafted HTML that, when loaded by...

234

Continuous Water Vapor Profiles from Operational GroundBased Active and Passive Remote Sensors  

Science Conference Proceedings (OSTI)

The Atmospheric Radiation Measurement program's Southern Great Plains Cloud and Radiation Testbed site central facility near Lamont, Oklahoma, offers unique operational water vapor profiling capabilities, including active and passive remote ...

D. D. Turner; W. F. Feltz; R. A. Ferrare

2000-06-01T23:59:59.000Z

235

T-673: Apple Safari Multiple Flaws Let Remote Users Execute Arbitrary...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

hidden, auto-filled forms on the target user's browser CVE-2011-0217. With a certain Java configuration, a remote user can create a specially crafted web site that, when loaded...

236

REMOTE CONTROL MANIPULATOR  

DOE Patents (OSTI)

The patent covers a remote-control manipulator in which a tool is carried on a tube at an end thereof angularly related to the main portion of the tube and joined thereto by a curved section. The main portion of the tube is mounted for rotation and axial shifting in a wall separating safe and dangerous areas. The tool is actuated to grasp and release an object in the dangerous area by means of a compound shaft extending through the tube, the shaft having a flexible section extending through the curved section of the tube. The tool is moved about in the dangerous area by rotation and axial movement of the main portion of the tube. Additional movement of the tool is obtained through axial shifting of the shaft with respect to the tube through which it extends. (AEC)

Coffman, R.T.

1962-11-27T23:59:59.000Z

237

REMOTE ACCESS SERVICES | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

REMOTE ACCESS SERVICES REMOTE ACCESS SERVICES REMOTE ACCESS SERVICES Access the information you need... Anywhere. Anytime. Different service providers within the Department offer remote access services based on your specific work requirements. If you need assistance, please contact your individual service provider. Energy IT Services (EITS) Remote Access Services Outlook Web Access RSA Token Login RSA Token Instructions HSPD-12 Login HSPD-12 Badge Instructions Virtual Private Network Instructions Citrix Workplace Instructions Energy Information Administration (EIA) Remote Access Services Outlook Web Access EIA VPN Office of Intelligence and Counterintelligence (IN) Remote Access Services Outlook Web Access Office of Science (SC) Remote Access Services Citrix Workplace Help for EITS Customers

238

Mobile Alternative Fueling Station Locator  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Alternative Fueling Station Locator Alternative Fueling Station Locator Fuel Type Biodiesel (B20 and above) Compressed Natural Gas Electric Ethanol (E85) Hydrogen Liquefied Natural Gas (LNG) Liquefied Petroleum Gas (Propane) Location Enter a city, postal code, or address Include private stations Not all stations are open to the public. Choose this option to also search private fueling stations. Search Caution: The AFDC recommends that users verify that stations are open, available to the public, and have the fuel prior to making a trip to that location. Some stations in our database have addresses that could not be located by the Station Locator application. This may result in the station appearing in the center of the zip code area instead of the actual location. If you're having difficulty, please contact the technical response team at

239

Remote wind measurements with a new microprocessor-based accumulator device  

SciTech Connect

The employment of a unique microprocessor-based accumulator device for remote meteorological measurements is described. The unit was designed for remote application with wind instruments to respond to the need for a very inexpensive survey unit to provide statistical summaries of basic wind data for the wind turbine siting decision process. While it is versatile enough to be used in many other remote measurement scenarios, the device will be described primarily in its application to wind measurements for siting wind energy conversion systems (WECS), otherwise known as wind turbines.

Verholek, M.G.; Ekstrom, P.A.

1978-04-01T23:59:59.000Z

240

Remote Gamma Scanning System for Characterization of BWR and PWR Fuel Rod Sections  

SciTech Connect

Sometimes challenges with the design and deployment of automated equipment in remote environments deals more with the constraints imposed by the remote environment than it does with the details of the automation. This paper discusses the development of a scanning system used to provide gamma radiation profiles of irradiated fuel rod segments. The system needed the capability to provide axial scans of cut segments of BWR and PWR fuel rods. The scanning location is A-Cell at the Radiochemical Processing Laboratory (RPL) at the Hanford site in Washington State. The criteria for the scanning equipment included axial scanning increments of a tenth of an inch or less, ability to scan fuel rods with diameters ranging from 3/8 inch to 5/8 inch in diameter, and fuel rod segments up to seven feet in length. Constraints imposed by the environment included having the gamma detector and operator controls on the outside of the hot cell and the scanning hardware on the inside of the hot cell. This entailed getting a narrow, collimated beam of radiation from the fuel rod to the detector on the outside of the hot cell while minimizing the radiation exposure caused by openings for the wires and cables traversing the hot cell walls. Setup and operation of all of the in-cell hardware needed to accommodate limited access ports and use of hot cell manipulators. The radiation levels inside the cell also imposed constraints on the materials used.

Crowell, Shannon L.; Alzheimer, James M.

2011-08-08T23:59:59.000Z

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

T-573: Windows Remote Desktop Client DLL Loading Error Lets Remote Users  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3: Windows Remote Desktop Client DLL Loading Error Lets Remote 3: Windows Remote Desktop Client DLL Loading Error Lets Remote Users Execute Arbitrary Code T-573: Windows Remote Desktop Client DLL Loading Error Lets Remote Users Execute Arbitrary Code March 9, 2011 - 3:05pm Addthis PROBLEM: Vulnerability in Remote Desktop Client Could Allow Remote Code Execution. PLATFORM: Remote Desktop Connection Client Version(s): 5.2, 6.0, 6.1, 7.0 ABSTRACT: A vulnerability was reported in Windows Remote Desktop Client. A remote user can cause arbitrary code to be executed on the target user's system. reference LINKS: Microsoft Security Bulletin MS11-017 SecurityTracker Alert ID:1025172 CVE-2011-0029 IMPACT ASSESSMENT: Moderate Discussion: A remote user can create a specially crafted DLL file on a remote share (e.g., WebDAV, SMB share). When the target user opens a valid Remote

242

Remote Optical Control of an Optical Flip-Flop  

Science Conference Proceedings (OSTI)

We experimentally demonstrate control of a holding-beamenabled optical flip-flop by means of optical signals that act in a remote fashion. These optical-control signals vary the holding-beam power by means of cross-gain modulation within a remotely located semiconductor optical amplifier (SOA). The power-modulated holding beam then travels through a resonant-type SOA, where flip-flop action occurs as the holding-beam power falls above and below the switching thresholds of the bistable hysteresis. Control is demonstrated using submilliwatt pulses whose wavelengths are not restricted to the vicinity of the holding beam. Benefits of remote control include the potential for controlling multiple flip-flops with a single pair of optical signals and for realizing all-optical control of any holding-beamenabled flip-flop.

Maywar, D.N.; Solomon, K.P.; Agrawal, G.P.

2007-11-01T23:59:59.000Z

243

Design of a multisystem remote maintenance control room  

SciTech Connect

The Remote Systems Development Section of the Consolidated Fuel Reprocessing Program at the Oak Ridge National Laboratory (ORNL) and Japan's Power Reactor and Nuclear Fuel Development Corporation (PNC) recently collaborated in the development of a control room concept for remote operations. This report describes design methods and the resulting control room concept. The design project included five stages. The first was compilation of a complete function list; functions are tasks performed by operators in the control room while operating equipment located in the remote area. The second step was organization of the function list into ''function groups;'' function groups are sets of functions that operate one piece of equipment. The third stage was determination of crew size and requirements for supervision. The fourth stage was development of conceptual designs of displays and controls. The fifth stage was development of plans for placement of crew stations within the control room. 5 figs., 1 tab.

Draper, J.V.; Handel, S.J.; Kring, C.T.; Kawatsuma, S.

1988-01-01T23:59:59.000Z

244

TWP Nauru Site  

NLE Websites -- All DOE Office Websites (Extended Search)

Nauru Site Nauru Site TWP Related Links Facilities and Instruments Manus Island Nauru Island Darwin, AUS ES&H Guidance Statement Operations Science Field Campaigns Year of Tropical Convection Visiting the Site TWP Fact Sheet Images Information for Guest Scientists Contacts TWP Nauru Site Location: 0° 31' 15.6" S, 166° 54' 57.60" E Altitude: 7.1 meters The Nauru facility was established in November 1998 as the second TWP climate research station. It is situated in the Denigomodu district on Nauru Island, the Republic of Nauru, which is located in the western South Pacific, approximately 1,200 miles northeast of Papua New Guinea. The ARM Program selected this location because it is on the eastern edge of the Pacific warm pool under La Niña conditions, which affect weather patterns

245

ARM - TWP Nauru Site  

NLE Websites -- All DOE Office Websites (Extended Search)

Nauru Site Nauru Site TWP Related Links Facilities and Instruments Manus Island Nauru Island Darwin, AUS ES&H Guidance Statement Operations Science Field Campaigns Year of Tropical Convection Visiting the Site TWP Fact Sheet Images Information for Guest Scientists Contacts TWP Nauru Site Location: 0° 31' 15.6" S, 166° 54' 57.60" E Altitude: 7.1 meters The Nauru facility was established in November 1998 as the second TWP climate research station. It is situated in the Denigomodu district on Nauru Island, the Republic of Nauru, which is located in the western South Pacific, approximately 1,200 miles northeast of Papua New Guinea. The ARM Program selected this location because it is on the eastern edge of the Pacific warm pool under La Niña conditions, which affect weather patterns

246

Analysis of the AirTouch automatic vehicle location system's ability to locate moving vehicles  

E-Print Network (OSTI)

Automatic vehicle location systems are becoming more prevalent in diverse transportation applications. Their ability to locate vehicles can assist in locating emergency and public transit vehicles for better real-time dispatching as well as recovering stolen vehicles. Because many applications require traveling vehicles, this thesis focused on the AirTouch system's ability to accurately locate a moving vehicle. Recent AirTouch vehicle location system reports were compiled and analyzed to distinguish what factors tend to affect the accuracy of the readings. Based on the results of the reports, two sites were selected to minimize the external effects that could create inaccurate readings. Six speeds were selected ranging from 0 to 80 kmph (O to 50 mph) in 16 kmph (10 mph) increments. Each velocity was tested 20 times at each site. The location readings were compared to differential Global Positioning System (dGPS) readings which currently provide the most accurate location readings available for civilian use. The dGPS readings were also collected at each test site. It was discovered that one site produced more accurate readings compared to the other site. In addition, the longitude differences accounted for most of the error in the readings. Finally, more error was prevalent in the readings associated with the vehicle's direction of travel as opposed to readings perpendicular to the direction of travel. Based on the data analysis, it was impossible to conclude if velocity affected the accuracy of the AirTouch system. The results of this thesis have suggested that the AirTouch system does decrease in accuracy as the velocity increases among traveling vehicles. However, in one case, the accuracy of the stationary readings were less accurate compared to the non-stationary readings. At 80 kmph (50 mph), AirTouch had an approximate inaccuracy of 50 meters (164 feet). When the data was adjusted for human error, this approximate inaccuracy decreased to 33 meters (107 feet). For transit services, these averages are appropriate. When dispatching a transit vehicle, two-way communication between dispatcher and driver can verify the vehicle's exact location. Furthermore, when a customer needs to know where a vehicle is and when it should arrive, 33 to 50 meters (107 to 164 feet) is sufficient for the customers' needs.

Henry, Tracy Lynn

1995-01-01T23:59:59.000Z

247

REMOTE HANDLING ARRANGEMENTS  

DOE Patents (OSTI)

A means for handling remotely a sample pellet to be irradiated in a nuclear reactor is proposed. It is comprised essentially of an inlet tube extending through the outer shield of the reactor and being inclined so that its outer end is at a higher elevation than its inner end, an outlet tube extending through the outer shield being inclined so that its inner end is at a higher elevation than its outer end, the inner ends of these two tubes being interconnected, and a straight tube extending through the outer shield and into the reactor core between the inlet and outlet tubes and passing through the juncture of said inner ends. A rod-like member is rotatably and slidely operated within the central straight tube and has a receptacle on its inner end for receiving a sample pellet from the inlet tube. The rod member is operated to pick up a sample pellet from the inlet tube, carry the sample pellet into the irradiating position within the core, and return to the receiving position where it is rotated to dump the irradiated pellet into the outlet tube by which it is conveyed by gravity to the outside of the reactor. Stop members are provided in the inlet tube, and electrical operating devices are provided to control the sequence of the operation automatically.

Ginns, D.W.

1958-04-01T23:59:59.000Z

248

Working Remotely | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Working Remotely Working Remotely Remote Access Use VPN to access Argonne resources Wake up your computer if power management policies have been applied Connect to your work computer by using Remote Desktop Communications Log into web-based e-mail Outlook Zimbra Send instant messages with Jabber Use Argonne's voice mail and teleconferencing services Use Adobe Connect for web conferencing E-Mail Client and Mobile Device Configuration Changes for Exchange 2010 Cyber Security Secure your home computers Passwords MyPassword Change your password Choosing a good password Other Tools Upload a file for retrieval by others (login required) Argonne SharePoint Server (login required) Inside Argonne (accessible onsite or through VPN) Focal Point Management Blog (accessible onsite or through VPN)

249

Mercury: Enabling Remote Procedure Call  

NLE Websites -- All DOE Office Websites (Extended Search)

High-Performance Computing (HPC), allows the execution of routines to be dele- gated to remote nodes, which can be set aside and dedicated to specific tasks. However, existing...

250

U-222: Apple Safari Bugs Let Remote Users Execute Arbitrary Code, Spoof the  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: Apple Safari Bugs Let Remote Users Execute Arbitrary Code, 2: Apple Safari Bugs Let Remote Users Execute Arbitrary Code, Spoof the URL Address Bar, Conduct Cross-Site Scripting Attacks, and Obtain Potentially Sensitive Information U-222: Apple Safari Bugs Let Remote Users Execute Arbitrary Code, Spoof the URL Address Bar, Conduct Cross-Site Scripting Attacks, and Obtain Potentially Sensitive Information July 27, 2012 - 7:00am Addthis PROBLEM: Apple Safari Bugs Let Remote Users Execute Arbitrary Code, Spoof the URL Address Bar, Conduct Cross-Site Scripting Attacks, and Obtain Potentially Sensitive Information PLATFORM: Version(s):Apple Safari prior to 6.0 ABSTRACT: Multiple vulnerabilities were reported in Apple Safari. reference LINKS: The Vendor's Advisory Bugtraq ID: 54683 SecurityTracker Alert ID: 1027307 IMPACT ASSESSMENT:

251

U-121: Apple iOS Bugs Let Remote Users Execute Arbitrary Code, Conduct  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

21: Apple iOS Bugs Let Remote Users Execute Arbitrary Code, 21: Apple iOS Bugs Let Remote Users Execute Arbitrary Code, Conduct Cross-Site Scripting Attacks, and Obtain Potentially Sensitive Information U-121: Apple iOS Bugs Let Remote Users Execute Arbitrary Code, Conduct Cross-Site Scripting Attacks, and Obtain Potentially Sensitive Information March 9, 2012 - 7:00am Addthis PROBLEM: Apple iOS Bugs Let Remote Users Execute Arbitrary Code, Conduct Cross-Site Scripting Attacks, and Obtain Potentially Sensitive Information PLATFORM: Apple iOS Version(s): prior to 5.1 ABSTRACT: Multiple vulnerabilities were reported in Apple iOS. reference LINKS: SecurityTracker Alert ID: 1026774 Apple Security Updates About the security content of iOS 5.1 Software Update CVE-2012-0641, CVE-2012-0642, CVE-2012-0643, CVE-2011-3453, CVE-2012-0644,

252

T-723:Adobe Flash Player Multiple Bugs Let Remote Users Obtain Information,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3:Adobe Flash Player Multiple Bugs Let Remote Users Obtain 3:Adobe Flash Player Multiple Bugs Let Remote Users Obtain Information, Conduct Cross-Site Scripting Attacks, and Execute Arbitrary Code T-723:Adobe Flash Player Multiple Bugs Let Remote Users Obtain Information, Conduct Cross-Site Scripting Attacks, and Execute Arbitrary Code September 22, 2011 - 8:00am Addthis PROBLEM: Adobe Flash Player Multiple Bugs Let Remote Users Obtain Information, Conduct Cross-Site Scripting Attacks, and Execute Arbitrary Code. PLATFORM: Adobe Flash Player 10.3.183.7 and earlier versions for Windows, Macintosh, Linux and Solaris. Adobe Flash Player 10.3.186.6 and earlier versions for Android. ABSTRACT: An attacker can exploit this issue by enticing an unsuspecting victim into visiting a malicious website. reference LINKS: Adobe Security Bulletin

253

U-222: Apple Safari Bugs Let Remote Users Execute Arbitrary Code, Spoof the  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: Apple Safari Bugs Let Remote Users Execute Arbitrary Code, 2: Apple Safari Bugs Let Remote Users Execute Arbitrary Code, Spoof the URL Address Bar, Conduct Cross-Site Scripting Attacks, and Obtain Potentially Sensitive Information U-222: Apple Safari Bugs Let Remote Users Execute Arbitrary Code, Spoof the URL Address Bar, Conduct Cross-Site Scripting Attacks, and Obtain Potentially Sensitive Information July 27, 2012 - 7:00am Addthis PROBLEM: Apple Safari Bugs Let Remote Users Execute Arbitrary Code, Spoof the URL Address Bar, Conduct Cross-Site Scripting Attacks, and Obtain Potentially Sensitive Information PLATFORM: Version(s):Apple Safari prior to 6.0 ABSTRACT: Multiple vulnerabilities were reported in Apple Safari. reference LINKS: The Vendor's Advisory Bugtraq ID: 54683 SecurityTracker Alert ID: 1027307 IMPACT ASSESSMENT:

254

ENGO 435 Ayman F. Habib Remote Sensing  

E-Print Network (OSTI)

ENGO 435 Ayman F. Habib 1 Remote Sensing Fall 2003 ENGO 435 Ayman F. Habib 2 Contact Information of remotes sensing. ­ Definitions and concepts. ­ Applications in Geomatics Engineering. · Emphasis: ­ Elements of remote sensing. ­ Systems for the acquisition of remote sensing data. ­ Radiometric

Habib, Ayman

255

REMOTE SENSING OF ENVIRONMENT I COURSE SYLLABUS  

E-Print Network (OSTI)

-1- REMOTE SENSING OF ENVIRONMENT I COURSE SYLLABUS GEOG 526, Fall 2012 T Th 9:30 ­ 10:45 228 relating to remote sensing of the earth's environment. We will begin by examining remote sensing as a field will shift to digital image processing and to areas in which remote sensing is applied as a tool for mapping

Peterson, Blake R.

256

Remote Sensing Ayman F. Habib Image Classification  

E-Print Network (OSTI)

1 Remote Sensing Ayman F. Habib 1 Chapter 6 Image Classification Remote Sensing Ayman F. Habib 2. ­ Unsupervised classification. · Accuracy assessment. #12;2 Remote Sensing Ayman F. Habib 3 Image Classification of image pixels is based on their digital numbers/grey values in one or more spectral bands. Remote Sensing

Habib, Ayman

257

Remote-Handled Low Level Waste Disposal Project Alternatives Analysis  

Science Conference Proceedings (OSTI)

This report identifies, evaluates, and compares alternatives for meeting the U.S. Department of Energys mission need for management of remote-handled low-level waste generated by the Idaho National Laboratory and its tenants. Each alternative identified in the Mission Need Statement for the Remote-Handled Low-Level Waste Treatment Project is described and evaluated for capability to fulfill the mission need. Alternatives that could meet the mission need are further evaluated and compared using criteria of cost, risk, complexity, stakeholder values, and regulatory compliance. The alternative for disposal of remote-handled low-level waste that has the highest confidence of meeting the mission need and represents best value to the government is to build a new disposal facility at the Idaho National Laboratory Site.

David Duncan

2010-10-01T23:59:59.000Z

258

Liquefaction of remote sources of natural gas. Final report  

SciTech Connect

The objective was to determine the technical and financial feasibility of liquefying remote reserves of natural gas and transporting the liquefied product to users. The proposed methodology included efforts to (1) identify any prohibitive or limiting laws and/or regulations; (2) identify sufficient unutilized reserves in remote areas to justify further investigation; (3) identify existing portable liquefaction equipment (or an interested manufacturer that could supply the needed equipment) to obtain cost and performance data; (4) determine site preparation, supply and production costs for use in assessing economic feasibility; and (5) identify potential users. The conclusion is that the liquefaction of natural gas in remote areas of Appalachia is not economically feasible as long as an adequate and reliable supply of pipeline gas is perceived to be available for the forseable future and the price per Btu of pipeline gas remains so far below other fuels. 3 tables.

Rogers, D.W.

1981-12-01T23:59:59.000Z

259

Optimizing Fire Station Locations for the Istanbul Metropolitan Municipality  

Science Conference Proceedings (OSTI)

The Istanbul Metropolitan Municipality IMM seeks to determine locations for additional fire stations to build in Istanbul; its objective is to make residences and historic sites reachable by emergency vehicles within five minutes of a fire stations ... Keywords: fire station location, geographic information system, maximal-covering problem, set-covering problem

Emel Akta?; zay zayd?n; Burin Bozkaya; Fsun lengin; ?ule nsel

2013-05-01T23:59:59.000Z

260

Precision zero-home locator  

DOE Patents (OSTI)

A zero-home locator includes a fixed phototransistor switch and a moveable actuator including two symmetrical, opposed wedges, each wedge defining a point at which switching occurs. The zero-home location is the average of the positions of the points defined by the wedges.

Stone, William J. (Kansas City, MO)

1986-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Precision zero-home locator  

DOE Patents (OSTI)

A zero-home locator includes a fixed phototransistor switch and a moveable actuator including two symmetrical, opposed wedges, each wedge defining a point at which switching occurs. The zero-home location is the average of the positions of the points defined by the wedges.

Stone, W.J.

1983-10-31T23:59:59.000Z

262

Remote Sensing Techniques | Open Energy Information  

Open Energy Info (EERE)

Remote Sensing Techniques Remote Sensing Techniques Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Remote Sensing Techniques Details Activities (0) Areas (0) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Remote Sensing Techniques Exploration Sub Group: None Parent Exploration Technique: Exploration Techniques Information Provided by Technique Lithology: Stratigraphic/Structural: Hydrological: Thermal: Dictionary.png Remote Sensing Techniques: Remote sensing utilizes satellite and/or airborne based sensors to collect information about a given object or area. Remote sensing data collection methods can be passive or active. Passive sensors (e.g., spectral imagers) detect natural radiation that is emitted or reflected by the object or area

263

Application of UAVs at the Savannah River Site  

SciTech Connect

Small, unmanned aerial vehicles (UAVs) equipped with sensors for physical, chemical, and radiochemical measurements of remote environments have been tested at the Savannah River Site (SRS). A miniature helicopter was used as an aerial platform for testing a variety of sensors with outputs integrated with the flight control system for real-time data acquisition and evaluation. The sensors included a precision magnetometer, two broad band infra-red radiometers, a 1-inch by 1-inch Nal(TI) scintillation detector, and an on-board color video camera. Included in the avionics package was an ultrasonic altimeter, a precision barometer, and a portable Global Positioning System. Two separate demonstration locations at SRS were flown that had been previously characterized by careful sampling and analyses and by aerial surveys at high altitudes. The Steed Pond demonstration site contains elevated levels of uranium in the soil and pond silt due to runoff from one of the site`s uranium fuel and target production areas. The soil at the other site is contaminated with oil bearing materials and contains some buried objects. The results and limitations of the UAV surveys are presented and improvements for future measurements are discussed.

Hofstetter, K.J.; Pendergast, M.M.

1996-08-01T23:59:59.000Z

264

CHAPTER 12:CHAPTER 12: Remote Sensing ofRemote Sensing of  

E-Print Network (OSTI)

1 CHAPTER 12:CHAPTER 12: Remote Sensing ofRemote Sensing of WaterWaterWaterWater REFERENCE: Remote SensingREFERENCE: Remote Sensing of the Environmentof the Environment John R. Jensen (2007)John R. Jensen yy y the waterthe water with remotewith remote sensing?sensing? #12;2 THE BLUE PLANETTHE BLUE PLANET

Gilbes, Fernando

265

Remote Sensing Ayman F. Habib Radiometric Processing of Remote Sensing Data  

E-Print Network (OSTI)

Remote Sensing Ayman F. Habib 1 Chapter 4 Radiometric Processing of Remote Sensing Data #12;Remote. · Noise removal. · Point and edge detection. ­ Frequency domain. #12;Remote Sensing Ayman F. Habib 3 Radiometric Calibration #12;Remote Sensing Ayman F. Habib 4 Recorded Digital Numbers (DN) · Recorded grey

Habib, Ayman

266

Remote Invocation in Java G52CON Concepts of Concurrency Remote Invocation in Java  

E-Print Network (OSTI)

.out.println(account.balance()); } catch (Exception e) { // Error handling } } } Remote Invocation in Java G52CON ­ Concepts of Concurrency1 Remote Invocation in Java G52CON ­ Concepts of Concurrency Remote Invocation in Java · Provided by the java.rmi package · Based on a model of remote method invocation (RMI), equivalent to remote procedure

Mills, Steven

267

Remote drill bit loader  

DOE Patents (OSTI)

A drill bit loader is described for loading a tapered shank of a drill bit into a similarly tapered recess in the end of a drill spindle. The spindle has a transverse slot at the inner end of the recess. The end of the tapered shank of the drill bit has a transverse tang adapted to engage in the slot so that the drill bit will be rotated by the spindle. The loader is in the form of a cylinder adapted to receive the drill bit with the shank projecting out of the outer end of the cylinder. Retainer pins prevent rotation of the drill bit in the cylinder. The spindle is lowered to extend the shank of the drill bit into the recess in the spindle and the spindle is rotated to align the slot in the spindle with the tang on the shank. A spring unit in the cylinder is compressed by the drill bit during its entry into the recess of the spindle and resiliently drives the tang into the slot in the spindle when the tang and slot are aligned. In typical remote drilling operations, whether in hot cells or water pits, drill bits have been held using a collet or end mill type holder with set screws. In either case, to load or change a drill bit required the use master-slave manipulators to position the bits and tighten the collet or set screws. This requirement eliminated many otherwise useful work areas because they were not equipped with slaves, particularly in water pits.

Dokos, J.A.

1996-12-31T23:59:59.000Z

268

Remote control for anode-cathode adjustment  

DOE Patents (OSTI)

An apparatus for remotely adjusting the anode-cathode gap in a pulse power machine has an electric motor located within a hollow cathode inside the vacuum chamber of the pulse power machine. Input information for controlling the motor for adjusting the anode-cathode gap is fed into the apparatus using optical waveguides. The motor, controlled by the input information, drives a worm gear that moves a cathode tip. When the motor drives in one rotational direction, the cathode is moved toward the anode and the size of the anode-cathode gap is diminished. When the motor drives in the other direction, the cathode is moved away from the anode and the size of the anode-cathode gap is increased. The motor is powered by batteries housed in the hollow cathode. The batteries may be rechargeable, and they may be recharged by a photovoltaic cell in combination with an optical waveguide that receives recharging energy from outside the hollow cathode. Alternatively, the anode-cathode gap can be remotely adjusted by a manually-turned handle connected to mechanical linkage which is connected to a jack assembly. The jack assembly converts rotational motion of the handle and mechanical linkage to linear motion of the cathode moving toward or away from the anode.

Roose, Lars D. (Albuquerque, NM)

1991-01-01T23:59:59.000Z

269

Remote control for anode-cathode adjustment  

DOE Patents (OSTI)

An apparatus for remotely adjusting the anode-cathode gap in a pulse power machine has an electric motor located within a hollow cathode inside the vacuum chamber of the pulse power machine. Input information for controlling the motor for adjusting the anode-cathode gap is fed into the apparatus using optical waveguides. The motor, controlled by the input information, drives a worm gear that moves a cathode tip. When the motor drives in one rotational direction, the cathode is moved toward the anode and the size of the anode-cathode gap is diminished. When the motor drives in the other direction, the cathode is moved away from the anode and the size of the anode-cathode gap is increased. The motor is powered by batteries housed in the hollow cathode. The batteries may be rechargeable, and they may be recharged by a photovoltaic cell in combination with an optical waveguide that receives recharging energy from outside the hollow cathode. Alternatively, the anode-cathode gap can be remotely adjusted by a manually-turned handle connected to mechanical linkage which is connected to a jack assembly. The jack assembly converts rotational motion of the handle and mechanical linkage to linear motion of the cathode moving toward or away from the anode. 3 figs.

Roose, L.D.

1989-10-04T23:59:59.000Z

270

Remote Access to Brookhaven, Information Services Division (ISD),  

NLE Websites -- All DOE Office Websites (Extended Search)

ISD Homepage ISD Homepage Site Details ISD Staff Remote Access Other Information BNL Site Index Can't View PDFs? Remote Access to Brookhaven External BNL users who need internet access to the internal ISD website which includes the Research Library, Records Management, Publications and Technical Editing must have a Virtual Private Network (VPN) account to connect to the BNL Internal Campus Network. This account can be setup by the Accounts Management Office. Available Options Remote Access Policy Broad-Band Connection: must use VPN with a CryptoCard Token Anti-Virus Procedures All Windows PCs should be running one of Brookhaven's official anti-virus software packages when connecting remotely to the BNL Internal Campus Network. Anti-Virus procedures are an important component of BNL's host-based security architecture. Anti-Virus software is the component of this architecture that provides a protection mechanism against malicious code. Malicious codes are programs, such as Trojan horses or viruses, that run on a host system without the authorization of the system user. These codes typically come from e-mail attachments, or can be downloaded along with programs from the Internet, or through an infected floppy disk. Properly installed anti-virus software can minimize these vulnerabilities.

271

U-240: Apple Remote Desktop Encryption Failure Lets Remote Users Obtain  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0: Apple Remote Desktop Encryption Failure Lets Remote Users 0: Apple Remote Desktop Encryption Failure Lets Remote Users Obtain Potentially Sensitive Information U-240: Apple Remote Desktop Encryption Failure Lets Remote Users Obtain Potentially Sensitive Information August 21, 2012 - 7:00am Addthis PROBLEM: Apple Remote Desktop Encryption Failure Lets Remote Users Obtain Potentially Sensitive Information PLATFORM: Apple Remote Desktop after 3.5.1 and prior to 3.6.1 ABSTRACT: A remote user can monitor potentially sensitive information. reference LINKS: Apple.com Apple Article: HT5433 SecurityTracker Alert ID: 1027420 CVE-2012-0681 IMPACT ASSESSMENT: Medium Discussion: A vulnerability was reported in Apple Remote Desktop. When a user connects to a third-party VNC server with the 'Encrypt all network data' setting enabled, network data is not encrypted. A remote user monitoring the

272

Remote shock sensing and notification system  

DOE Patents (OSTI)

A low-power shock sensing system includes at least one shock sensor physically coupled to a chemical storage tank to be monitored for impacts, and an RF transmitter which is in a low-power idle state in the absence of a triggering signal. The system includes interface circuitry including or activated by the shock sensor, wherein an output of the interface circuitry is coupled to an input of the RF transmitter. The interface circuitry triggers the RF transmitter with the triggering signal to transmit an alarm message to at least one remote location when the sensor senses a shock greater than a predetermined threshold. In one embodiment the shock sensor is a shock switch which provides an open and a closed state, the open state being a low power idle state.

Muralidharan, Govindarajan (Knoxville, TN); Britton, Charles L. (Alcoa, TN); Pearce, James (Lenoir City, TN); Jagadish, Usha (Knoxville, TN); Sikka, Vinod K. (Oak Ridge, TN)

2010-11-02T23:59:59.000Z

273

Remote shock sensing and notification system  

DOE Patents (OSTI)

A low-power shock sensing system includes at least one shock sensor physically coupled to a chemical storage tank to be monitored for impacts, and an RF transmitter which is in a low-power idle state in the absence of a triggering signal. The system includes interference circuitry including or activated by the shock sensor, wherein an output of the interface circuitry is coupled to an input of the RF transmitter. The interface circuitry triggers the RF transmitting with the triggering signal to transmit an alarm message to at least one remote location when the sensor senses a shock greater than a predetermined threshold. In one embodiment the shock sensor is a shock switch which provides an open and a closed state, the open state being a low power idle state.

Muralidharan, Govindarajan (Knoxville, TN); Britton, Charles L. (Alcoa, TN); Pearce, James (Lenoir City, TN); Jagadish, Usha (Knoxville, TN); Sikka, Vinod K. (Oak Ridge, TN)

2008-11-11T23:59:59.000Z

274

Results of the remote sensing feasibility study for the uranium hexafluoride storage cylinder yard program  

Science Conference Proceedings (OSTI)

The US DOE manages the safe storage of approximately 650,000 tons of depleted uranium hexafluoride remaining from the Cold War. This slightly radioactive, but chemically active, material is contained in more than 46,000 steel storage cylinders that are located at Oak Ridge, Tennessee; Paducah, Kentucky; and Portsmouth, Ohio. Some of the cylinders are more than 40 years old, and approximately 17,500 are considered problem cylinders because their physical integrity is questionable. These cylinders require an annual visual inspection. The remainder of the 46,000-plus cylinders must be visually inspected every four years. Currently, the cylinder inspection program is extremely labor intensive. Because these inspections are accomplished visually, they may not be effective in the early detection of leaking cylinders. The inspection program requires approximately 12--14 full-time-equivalent (FTE) employees. At the cost of approximately $125K per FTE, this translates to $1,500K per annum just for cylinder inspection. As part of the technology-development portion of the DOE Cylinder Management Program, the DOE Office of Facility Management requested the Remote Sensing Laboratory (RSL) to evaluate remote sensing techniques that have potential to increase the effectiveness of the inspection program and, at the same time, reduce inspection costs and personnel radiation exposure. During two site visits (March and May 1996) to the K-25 Site at Oak Ridge, TN, RSL personnel tested and characterized seven different operating systems believed to detect leakage, surface contamination, thickness and corrosion of cylinder walls, and general area contamination resulting from breached cylinders. The following techniques were used and their performances are discussed: Laser-induced fluorescent imaging; Long-range alpha detection; Neutron activation analysis; Differential gamma-ray attenuation; Compton scatterometry; Active infrared inspection; and Passive thermal infrared imaging.

Balick, L.K.; Bowman, D.R. [Bechtel Nevada, Las Vegas, NV (United States). Remote Sensing Lab.; Bounds, J.H. [Los Alamos National Lab., NM (United States)] [and others

1997-02-01T23:59:59.000Z

275

Skeleton composition using remote data  

E-Print Network (OSTI)

Abstract. Skeletons simplify parallel programming by providing general patterns of parallel computations. When several skeletons are used inside the same program, skeleton composition usually leads to aggregation and redistribution of the intermediate data on a single process. Though the programmer can overcome the performance loss at a lower level of abstraction by altering the existing skeletons or not using them at all. A high-level concept like skeleton-based programming, however, calls for a more general solution. Remote data provides runtime mechanisms that allow declaratively specified processes to access other processes data via remote handles. This enables the programmer to easily build complex skeletons by combining simpler ones. Skeletons can be composed without the drawback of collecting and then redistributing the data in between two skeleton instances. Another advantage is that skeletons which inherently depend on their inner communication patterns are easily implemented using remote data. We present the implementation of remote data in the parallel functional language Eden and show the definition of some example skeletons with a remote data interface.

Mischa Dieterle; Thomas Horstmeyer; Rita Loogen

2010-01-01T23:59:59.000Z

276

Development of a Remote Monitoring Sensor Network for In-Situ  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

a Remote Monitoring Sensor Network for In-Situ a Remote Monitoring Sensor Network for In-Situ Decommissioned Structures Development of a Remote Monitoring Sensor Network for In-Situ Decommissioned Structures On October 19-22, 2010, an independent expert panel of scientists and engineers met to assist the Department of Energy (DOE) and the Savannah River National Laboratory in developing a technical report that recommends the best sensing and concrete technologies for monitoring and isolating contaminants within highly-radioactive nuclear structures in the DOE in situ decommissioning program. This document identifies the recommendations of the panel for shortand long-term objectives needed to develop a remote monitoring network for the C Reactor Building at the Savannah River Site. Development of a Remote Monitoring Sensor Network for In-Situ

277

Development of a Remote Monitoring Sensor Network for In-Situ  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Development of a Remote Monitoring Sensor Network for In-Situ Development of a Remote Monitoring Sensor Network for In-Situ Decommissioned Structures Development of a Remote Monitoring Sensor Network for In-Situ Decommissioned Structures On October 19-22, 2010, an independent expert panel of scientists and engineers met to assist the Department of Energy (DOE) and the Savannah River National Laboratory in developing a technical report that recommends the best sensing and concrete technologies for monitoring and isolating contaminants within highly-radioactive nuclear structures in the DOE in situ decommissioning program. This document identifies the recommendations of the panel for shortand long-term objectives needed to develop a remote monitoring network for the C Reactor Building at the Savannah River Site. Development of a Remote Monitoring Sensor Network for In-Situ

278

Defense Waste Processing Facility -- Radioactive operations -- Part 3 -- Remote operations  

SciTech Connect

The Savannah River Site`s Defense Waste Processing Facility (DWPF) near Aiken, South Carolina is the nation`s first and world`s largest vitrification facility. Following a ten year construction period and nearly three years of non-radioactive testing, the DWPF began radioactive operations in March 1996. Radioactive glass is poured from the joule heated melter into the stainless steel canisters. The canisters are then temporarily sealed, decontaminated, resistance welded for final closure, and transported to an interim storage facility. All of these operations are conducted remotely with equipment specially designed for these processes. This paper reviews canister processing during the first nine months of radioactive operations at DWPF. The fundamental design consideration for DWPF remote canister processing and handling equipment are discussed as well as interim canister storage.

Barnes, W.M.; Kerley, W.D.; Hughes, P.D.

1997-06-01T23:59:59.000Z

279

The REMOTE SENSlNf  

Office of Legacy Management (LM)

REMOTE REMOTE SENSlNf ' . 1 ARllRllRRv OF THE UNITED STATES DEPARTMENT OF ENERGY . . . . .a. * ~~&hrEAWWMms Gap ~~&hrEAwwMms Gap ECT FOLLdW-UP REPORT ECT FOLLdW-UP REPORT NOVEMBER 1979 NOVEMBER 1979 AN AERIAL RADIOLOGICAL SURVEY OF THE CURTIS BAY FACILITY OF THE W. FL GRACE COMPANY Baltimore, Maryland t. Kent Hilton Project Scientist APPROVED FORPUBLlCATlON ' : T. P. Stuart, Manager Remote Sensing Sciences Department ATTACHMENT 4- ECT Follow-Up Report AN AERIAL RADIOLOGICAL SURVEY OF THE CURTIS BAY FACILITY This is the second of two reports discussing the gamma ray radiation levels measured at the Curtis Bay facility of the W. R. Grace Company. The first report presented gross count contours and gamma ray spectra over the most active areas. Refined gross count isopleth maps will be

280

GTRI Remote Monitoring System: Training and Operational Needs Assessment Analysis Report  

SciTech Connect

The mission of the United States Department of Energy (DOE) National Nuclear Security Administrations (NNSA's) Global Threat Reduction Initiative (GTRI) is to identify, secure, recover and facilitate the disposition of vulnerable nuclear and high-risk radioactive materials around the world that pose a threat to the United States and the international community. The GTRI's unique mission to reduce and protect vulnerable nuclear and radiological materials located at civilian sites worldwide directly addresses recommendations of the 9/11 Commission1, and is a vital part of the President's National Security Strategy and the Global Initiative. The GTRI Remote Monitoring System (RMS) is a standalone security system that includes radiation and tamper alarms, and CCTV; which can be transmitted securely over the Internet to multiple on-site and off-site locations. Through our experiences during installation of the system at 162 sites, plus feedback received from Alarm Response Training course participants, site input to project teams and analysis of trouble calls; indications were that current system training was lacking and inconsistent. A survey was undertaken to gather information from RMS users across the nation, to evaluate the current level of training and determine what if any improvements needed to be made. Additional questions were focused on the operation of the RMS software. The training survey was initially sent electronically to 245 users at the RMS sites and achieved a 37.6% return rate. Analysis of the resulting data revealed that 34.6% of the respondents had not received training or were unsure if they had, despite the fact that vendor engineers provide training at installation of the system. Any training received was referred to as minimal, and brief, not documented, and nothing in writing. 63.7% of respondents said they were either not at all prepared or only somewhat prepared to use the RMS software required to effectively operate the system. As a result of this analysis, a formal training curriculum will be designed and implemented to include several blended learning delivery options. This training will be piloted at RMS sites; initial training will become a required element of RMS installation and refresher training will be considered for sustainability of operations.

Day, Debra E.; Fox, Sorcha

2012-04-20T23:59:59.000Z

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Pantex Site  

NLE Websites -- All DOE Office Websites (Extended Search)

Pantex Site Pantex Site The primary mission of the Pantex Plant is the assembly, disassembly, testing, and evaluation of nuclear wespons in support of the NNSA stockpile...

282

Lighting for remote viewing systems  

SciTech Connect

Scenes viewed by television do not provide the same channels of information for judgment of distances as scenes viewed directly, since television eliminates or degrades several depth perception cues. However, it may be possible to improve depth perception of televised scenes by enhancing the information available through depth cues that are available from lighting. A literature survey and expert opinions were integrated to design a remote lighting arrangement which could enhance depth perception of operators performing remote handling operations. This paper describes the lighting arrangement and discusses some of its advantages and disadvantages. 10 references, 2 figures.

Draper, J.V.

1984-01-01T23:59:59.000Z

283

Lighting for remote viewing systems  

SciTech Connect

Scenes viewed by television do not provide the same channels of information for judgement of distances as scenes viewed directly, since television eliminates or degrades several depth perception cues. However, it may be possible to improve depth perception of televised scenes by enhancing the information available through depth cues that are available from lighting. A literature survey and expert opinions were integrated to design a remote lighting arrangement which could enhance depth perception of operators performing remote handling operations. This paper describes the lighting arrangement and discusses some of its advantages and disadvantages. 10 references, 2 figures.

Draper, J.V.

1984-01-01T23:59:59.000Z

284

ARM - Evaluation Product - Active Remote Sensing of Clouds from Ka-band ARM  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsActive Remote Sensing of Clouds from Ka-band ProductsActive Remote Sensing of Clouds from Ka-band ARM Zenith Radars Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Evaluation Product : Active Remote Sensing of Clouds from Ka-band ARM Zenith Radars Site(s) GAN SGP General Description The Ka-band ARM Zenith Radars (KAZRs) have replaced the long-serving Millimeter Cloud Radars, or MMCRs. Accordingly, the primary MMCR Value Added Product (VAP), the Active Remote Sensing of CLouds (ARSCL) product, is being replaced by a KAZR-based version, the KAZR-ARSCL VAP. KAZR-ARSCL provides cloud boundaries and best-estimate time-height fields of radar moments. KAZR observations are corrected for water vapor attenuation and velocity aliasing and significant detection masks are produced. KAZR-ARSCL

285

T-704: RSA enVision Lets Remote Users View Files and Remote Authenticated  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

704: RSA enVision Lets Remote Users View Files and Remote 704: RSA enVision Lets Remote Users View Files and Remote Authenticated Users Obtain Password T-704: RSA enVision Lets Remote Users View Files and Remote Authenticated Users Obtain Password August 29, 2011 - 3:45am Addthis PROBLEM: Allows remote attackers to obtain sensitive information by sniffing the network or leveraging access to a recipient mailbox. PLATFORM: RSA enVision Version(s): 3.x, 4.x ABSTRACT: RSA enVision lets remote users view files and remote authenticated users obtain password. reference LINKS: SecurityTracker Alert ID: 1025979 CVE-2011-2736 CVE-2011-2737 RSA enVision Product Security IMPACT ASSESSMENT: Medium Discussion: Two vulnerabilities were reported in RSA enVision. A remote user can view files on the target system. A remote authenticated user can obtain

286

T-704: RSA enVision Lets Remote Users View Files and Remote Authenticated  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4: RSA enVision Lets Remote Users View Files and Remote 4: RSA enVision Lets Remote Users View Files and Remote Authenticated Users Obtain Password T-704: RSA enVision Lets Remote Users View Files and Remote Authenticated Users Obtain Password August 29, 2011 - 3:45am Addthis PROBLEM: Allows remote attackers to obtain sensitive information by sniffing the network or leveraging access to a recipient mailbox. PLATFORM: RSA enVision Version(s): 3.x, 4.x ABSTRACT: RSA enVision lets remote users view files and remote authenticated users obtain password. reference LINKS: SecurityTracker Alert ID: 1025979 CVE-2011-2736 CVE-2011-2737 RSA enVision Product Security IMPACT ASSESSMENT: Medium Discussion: Two vulnerabilities were reported in RSA enVision. A remote user can view files on the target system. A remote authenticated user can obtain

287

An Introduction to the Site... The site is located off of  

E-Print Network (OSTI)

on daylight saving. The Journal of Paris. Gunel, I. (1987). Forecasting system energy demand. Journal Networks to Power Systems, Yokohama. Kotchen, M. J. and Grant, L. E. (2008). Does daylight saving time saveThe Impact on Energy Consumption of Daylight Saving Clock Changes S. I. Hilla, , F. Desobrya , E. W

Kyte, Michael

288

Lightning-Initiation Locations as a Remote Sensing Tool of Large Thunderstorm Electric Field Vectors  

Science Conference Proceedings (OSTI)

The lightning data that are recorded with a three-dimensional lightning mapping array (LMA) are compared with data from an electric field change sensor (in this case a flat-plate antenna operated both as a slow and a fast antenna). The goal ...

Christopher Maggio; Lee Coleman; Thomas Marshall; Maribeth Stolzenburg; Mark Stanley; Timothy Hamlin; Paul Krehbiel; William Rison; Ron Thomas

2005-07-01T23:59:59.000Z

289

Major DOE Biofuels Project Locations  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Biofuels Project Locations Biofuels Project Locations BlueFire Ethanol Biochemical Municipal Solid Waste (Mecca, CA) Poet Biochemical Corn Cob/Corn Fiber (Emmetsburg, IA) Lignol Biochemical Woody Biomass- Ag Residues (Grand Junction, CO) ICM Biochemical Switchgrass, Forage Sorghum, Stover (St. Joseph, MO) Abengoa Biochemica Agricultural Residue (Hugoton, KS) DOE Joint Bioenergy Institute (Berkeley, CA) DOE Great Lakes Bioenergy Research Center (Madison, WI) DOE Bioenergy Science Center (Oak Ridge, TN) NewPage Thermochemical Woody Biomass - Mill Residues (Wisconsin Rapids, WI) Range Fuels Thermochemical Woody Waste (Soperton, GA) DSM Innovation Center Biochemical Various (Parsippany, NJ) Novozymes Biochemical Various (Davis, CA) Genencor Biochemical Various (Palo Alto, CA) Verenium Corp Biochemical Various (San Diego, CA)

290

Where is the ideal location for a US East Coast offshore grid? Michael J. Dvorak,1  

E-Print Network (OSTI)

) employing current state-of- the-art voltage source converter based high voltage direct current (VSC-HVDC) technologies. A brief review of the VSC-HVDC evolvement is given followed by an overview of the advantages of employing VSC-HVDC for grid connection of large OWFs located remote from shore. A detailed description

Hanson, Thomas

291

DOE - Office of Legacy Management -- Conoco Conquista Site -...  

Office of Legacy Management (LM)

This site is a Uranium Mill Tailings Remedial Action (UMTRA) Title II site located in Texas. UMTRA Title II sites are privately owned and operated sites that were active when the...

292

Barrier Slicing for Remote Software Trusting  

Science Conference Proceedings (OSTI)

Remote trusting aims at verifying the "healthy" execution of a program running on an untrusted client that communicates with a trusted server via network connection. After giving a formal definition of the remote trusting problem and a test to determine ...

Mariano Ceccato; Mila Dalla Preda; Jasvir Nagra; Christian Collberg; Paolo Tonella

2007-09-01T23:59:59.000Z

293

Information about DOE Locations | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Information about DOE Locations Information about DOE Locations The following chart provides information about the FOIA program at each of the locations. You can link to the...

294

Energy Storage Demonstration Project Locations | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Demonstration Project Locations Energy Storage Demonstration Project Locations Map of the United States showing the location of Energy Storage Demonstration projects created with...

295

Energy Storage Demonstration Project Locations | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Storage Demonstration Project Locations Energy Storage Demonstration Project Locations Map of the United States showing the location of Energy Storage Demonstration projects...

296

Publicly Verifiable Remote Data Integrity  

Science Conference Proceedings (OSTI)

More and more customers are outsourcing data storage to remote archive service providers that are responsible for properly preserving the data. As such, it has become crucial for an archive service to be capable of providing evidence to demonstrate the ... Keywords: data outsourcing, integrity, pairing, public verifiability

Ke Zeng

2008-10-01T23:59:59.000Z

297

Utilization of variation optimization for location of emitter of random noise signal  

Science Conference Proceedings (OSTI)

In the paper the information method for optimal location of random noise signal emitter is suggested. The optimization is carried out on energy-information criterion, which makes it possible to locate site of generator of noise signal using geometric ...

H. H. Asadov; N. A. Abdullayev; M. J. Kerimov; E. F. Dadashov

2010-09-01T23:59:59.000Z

298

Establish Building Locations for Greenhouse Gas Mitigation | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Establish Building Locations for Greenhouse Gas Mitigation Establish Building Locations for Greenhouse Gas Mitigation Establish Building Locations for Greenhouse Gas Mitigation October 7, 2013 - 10:53am Addthis YOU ARE HERE Step 2 After estimating greenhouse gas (GHG) emissions by building type, building location is an important consideration in evaluating the relevance of energy-saving strategies due to variations in heating and cooling needs, and the GHG reduction potential due to variability of emissions factors across regions of the grid. If site-level energy use estimates are available for each of the program's key building types, the program can identify building locations with the greatest emission reduction potential by using the benchmarking approach. Locations with the worst energy performance relative to the benchmark are

299

Alternative Fueling Station Locator App Provides Info at Your Fingertips |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Alternative Fueling Station Locator App Provides Info at Your Alternative Fueling Station Locator App Provides Info at Your Fingertips Alternative Fueling Station Locator App Provides Info at Your Fingertips November 15, 2013 - 10:12am Addthis The Alternative Fueling Station Locator iPhone app helps you find fueling stations that offer electricity, natural gas, biodiesel, E85, propane, or hydrogen. | Energy Department The Alternative Fueling Station Locator iPhone app helps you find fueling stations that offer electricity, natural gas, biodiesel, E85, propane, or hydrogen. | Energy Department Shannon Brescher Shea Communications Manager, Clean Cities Program Smartphone users are familiar with the prompt, "Would you like this site to use your current location?" If you're looking for somewhere to fuel your

300

Alternative Fueling Station Locator App Provides Info at Your Fingertips |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Alternative Fueling Station Locator App Provides Info at Your Alternative Fueling Station Locator App Provides Info at Your Fingertips Alternative Fueling Station Locator App Provides Info at Your Fingertips November 15, 2013 - 10:12am Addthis The Alternative Fueling Station Locator iPhone app helps you find fueling stations that offer electricity, natural gas, biodiesel, E85, propane, or hydrogen. | Energy Department The Alternative Fueling Station Locator iPhone app helps you find fueling stations that offer electricity, natural gas, biodiesel, E85, propane, or hydrogen. | Energy Department Shannon Brescher Shea Communications Manager, Clean Cities Program Smartphone users are familiar with the prompt, "Would you like this site to use your current location?" If you're looking for somewhere to fuel your

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

DIRECTED ENERGY BIOMETRICS AND REMOTE SENSING  

Science Conference Proceedings (OSTI)

... New and Reorganized Appendices ?Sample Audit Forms ?And more ANSI Z 136.8 Page 6. DIRECTED ENERGY REMOTE SENSING: ...

2013-02-21T23:59:59.000Z

302

Streamlined environmental remediation characterization using remote sensing techniques: Case studies for the US Department of Energy, Oak Ridge Operations  

SciTech Connect

This paper provides an overview of the DOE Oak Ridge Operations Remote Sensing Program and discusses how data from this program have assisted the environmental restoration program in streamlining site-characterization activities. Three case studies are described where remote sensing imagery has provided a more focused understanding of site problems with a resultant reduction in the need for costly and time-consuming, ground-based sampling approaches.

Carden, D.M. [Department of Energy (DOE), TN (United States). Oak Ridge Operations; Smyre, J.L.; Evers, T.K.; King, A.L. [Oak Ridge National Lab., TN (United States)] [and others

1996-07-01T23:59:59.000Z

303

Remote Sens. 2011, 3, x-x manuscripts; doi:xx1 Remote Sensing3  

E-Print Network (OSTI)

Remote Sens. 2011, 3, x-x manuscripts; doi:xx1 2 Remote Sensing3 ISSN 2072-42924 www16 7 Lebanese National Council For Scientific Research, Remote Sensing Centre, Beirut, Lebanon17 in Remote Sensing, 2011, 3(6), 1266-1283. The original publication is available at http://www.mdpi.com/ Doi

Paris-Sud XI, Université de

304

Remote Sens. 2011, 3, 2529-2551; doi:10.3390/rs3112529 Remote Sensing  

E-Print Network (OSTI)

Remote Sens. 2011, 3, 2529-2551; doi:10.3390/rs3112529 Remote Sensing ISSN 2072-4292 www.mdpi.com/journal/remotesensing Article Multispectral Remote Sensing from Unmanned Aircraft: Image Processing Workflows and Applications Abstract: Using unmanned aircraft systems (UAS) as remote sensing platforms offers the unique ability

305

Remote Sensing 2010, 2, 2274-2304; doi:10.3390/rs2092274 Remote Sensing  

E-Print Network (OSTI)

Remote Sensing 2010, 2, 2274-2304; doi:10.3390/rs2092274 Remote Sensing ISSN 2072-4292 www.mdpi.com/journal/remotesensing Review Remote Sensing of Irrigated Agriculture: Opportunities and Challenges Mutlu Ozdogan *, Yang Yang / Published: 27 September 2010 Abstract: Over the last several decades, remote sensing has emerged

Wisconsin at Madison, University of

306

Polarimetric remote sensing system analysis: Digital Imaging and Remote Sensing Image Generation (DIRSIG) model  

E-Print Network (OSTI)

i Polarimetric remote sensing system analysis: Digital Imaging and Remote Sensing Image Generation CENTER FOR IMAGING SCIENCE Title of Dissertation: Polarimetric remote sensing system analysis: DIRSIG____________________________________________________________ Date #12;vi #12;vii Polarimetric remote sensing system analysis: DIRSIG model validation and impact

Salvaggio, Carl

307

Remote Sens. 2013, 5, 5926-5943; doi:10.3390/rs5115926 Remote Sensing  

E-Print Network (OSTI)

Remote Sens. 2013, 5, 5926-5943; doi:10.3390/rs5115926 Remote Sensing ISSN 2072-4292 www: 6 November 2013 / Accepted: 7 November 2013 / Published: 14 November 2013 Abstract: Remote sensing challenging to model crop yields based on remotely sensed data due to the variation in radiation use

Myneni, Ranga B.

308

REMOTE LABORATORIES IN AUTOMATION: AIP-PRIMECA RAO ARI PLATFORM Remote Laboratories in Automation  

E-Print Network (OSTI)

Terms -- Education, Laboratories, Manufacturing automation, Remote handling I.INTRODUCTION For a fewREMOTE LABORATORIES IN AUTOMATION: AIP-PRIMECA RAO ARI PLATFORM Remote Laboratories in Automation learners to train themselves on remote real or virtual systems. They represent essential components in e

Paris-Sud XI, Université de

309

Remote Food Shopping Robot System in a Supermarket Realization of the shopping task from remote places  

E-Print Network (OSTI)

the experimental result performed with the integrated system. Index Terms-- Remote shopping, Foods handling, Human dailylifeRemote shopping, Foods handling, Human dailylife I. INTRODUCTION In this research we focusedRemote Food Shopping Robot System in a Supermarket ­Realization of the shopping task from remote

Ohya, Akihisa

310

10 January 2009 PHOTOGRAMMETRIC ENGINEERING & REMOTE SENSING High Performance Computing in Remote Sensing  

E-Print Network (OSTI)

10 January 2009 PHOTOGRAMMETRIC ENGINEERING & REMOTE SENSING High Performance Computing in Remote Book ReviewBook Review High Performance Computing in Remote Sensing introduces the most recent advances in the incorporation of the high-performance computing (HPC) paradigm in remote sensing missions. Eighteen well

Plaza, Antonio J.

311

Remote Sensing for Water Quality Applications  

E-Print Network (OSTI)

Remote Sensing for Water Quality Applications #12;Objective Give a brief update on GEO Inland and Nearshore Coastal Water Quality Remote Sensing Workshop (GEO Work Task WA-06-01)) Held in Geneva and Nearshore Coastal Water Quality Remote Sensing Workshop (GEO Work Task WA-06-01)) Organizing committee

312

Airborne remote sensing in the frozen north  

E-Print Network (OSTI)

20 Airborne remote sensing in the frozen north High level shot from 10,000 feet shows, Chief Pilot and Operations Manager for NERC's Airborne Remote Sensing Facility reports on a recent trip expert ­ the Airborne Remote Sensing Facility flew to the Norwegian archipelago of Svalbard on August 3

Brierley, Andrew

313

Bylaws of the Center for Remote Sensing  

E-Print Network (OSTI)

DRAFT Bylaws of the Center for Remote Sensing Agricultural and Biological Engineering University for the conduct and operation of the Center for Remote Sensing (CRS) at the University of Florida (UF). The CRS and international recognition in research, teaching, and outreach for cutting-edge technologies in remote sensing

Watson, Craig A.

314

Geography 477 Introduction to Remote Sensing  

E-Print Network (OSTI)

Geography 477 Introduction to Remote Sensing www.sdal.uiuc.edu Dr. Tom Frank 321 Davenport Hall tdfrank@uiuc.edu 333-7248 #12;Remotely-sensed images of light reflected or emitted from the earth of the earth's environments #12;Remote sensing is the science or art of deriving information about an object

Frank, Thomas D.

315

Challenges and Opportunities of Remote Sensing in  

E-Print Network (OSTI)

Challenges and Opportunities of Remote Sensing in Caribbean Coastal Waters Fernando Gilbes-Santaella, Ph.D. Associate Professor Geological and Environmental Remote Sensing Laboratory Department of this presentation Discuss the potential and limitations for remote sensing of ocean color and coral reefs monitoring

Gilbes, Fernando

316

Remote Sensing of the Rob Holman1  

E-Print Network (OSTI)

Remote Sensing of the Nearshore Rob Holman1 and Merrick C. Haller2 1 College of Earth, Ocean- ate temporal or spatial density or at reasonable logistical or financial costs. Remote sensing algo- rithms by which the most important geophysical variables can be estimated from remote sensing

Haller, Merrick

317

The development of new algorithms for remote sensing of snow ...  

Science Conference Proceedings (OSTI)

Mar 14, 2010 ... remote sensing algorithm development, calibration and validation in ... Keywords Remote sensing Retrieval algorithms . Fractional snow...

318

Remote Sensing Methods for Imaging Dose to Water  

Science Conference Proceedings (OSTI)

Remote Sensing Methods for Imaging Dose to Water. Summary: Calorimetry based upon remote sensing of the temperature ...

2013-02-26T23:59:59.000Z

319

station locations | OpenEI  

Open Energy Info (EERE)

00 00 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142288500 Varnish cache server station locations Dataset Summary Description Alternative fueling stations are located throughout the United States and their availability continues to grow. The Alternative Fuels Data Center (AFDC) maintains a website where you can find alternative fuels stations near you or on a route, obtain counts of alternative fuels stations by state, Source Alternative Fuels Data Center Date Released December 13th, 2010 (4 years ago) Date Updated December 13th, 2010 (4 years ago) Keywords alt fuel alternative fuels alternative fuels stations biodiesel CNG compressed natural gas E85 Electricity ethanol

320

Interactive Remote and Distributed Visualization of Fusion Simulation Results  

Science Conference Proceedings (OSTI)

The NERSC center has unique resources that are especially tailored for interactive, high performance remote visualization. The central interactive visualization resource is Escher.nersc.gov, which is a large symmetric multiprocessor equipped with multiple gigabit interconnects to NERSC storage systems, as well as a large amount of main memory and substantial directly attached storage. Using Escher, we employ a pipelined architecture to support the demands of interactive, high-performance remote visualization. The pipelined architecture refers to an assembly-line organization of software ''workers'' that each contribute to an overall work flow. The first worker in the assembly line the server runs interactively in parallel on Escher. Parallel execution of the server provides substantial I/O and processing capabilities where it is needed close to the data. The second worker in the assembly line runs on the scientists workstation in their office, and performs 3D rendering at interactive rates. Visualization results geometry are transmitted between the two stages in the pipeline. This combination has proven effective at providing interactive 3D scientific visualization capabilities to remotely located NERSC users. Amortizing data I/O and visualization processing over parallel processors located close to the data provides capabilities that are simply not available on any desktop platform. These capabilities are an example of NERSCs commitment to providing the best possible tools and infrastructure to the computational science community.

Siegerist, C.; Shalf, J.; Bethel, E. Wes; Siegerist, Cristina

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Remote Sensing Ayman F. Habib Electro-Magnetic Radiation  

E-Print Network (OSTI)

Remote Sensing Ayman F. Habib 1 Chapter 2 Electro-Magnetic Radiation #12;Remote Sensing Ayman F. Habib 2 Elements of Remote Sensing #12;Remote Sensing Ayman F. Habib 3 Chapter 2 Radiation: nature & source #12;Remote Sensing Ayman F. Habib 4 Chapter 2 Interaction with the atmosphere #12;Remote Sensing

Habib, Ayman

322

Remote Sensing Ayman F. Habib Electro-Magnetic Radiation  

E-Print Network (OSTI)

Remote Sensing Ayman F. Habib 1 Chapter 2 Electro-Magnetic Radiation Remote Sensing Ayman F. Habib 2 Elements of Remote Sensing #12;Remote Sensing Ayman F. Habib 3 Chapter 2 Radiation: nature & source Remote Sensing Ayman F. Habib 4 Chapter 2 Interaction with the atmosphere #12;Remote Sensing Ayman

Habib, Ayman

323

Java^TM RemoteMethod Invocation Specification  

E-Print Network (OSTI)

2.7 Exception Handling in Remote Method Invocation. . . . . 11 2.8 Object Methods Overridden Handling in Remote Method Invocation . Object Methods Overridden by the RemoteObject Class . The Semantics.7 Exception Handling in Remote Method Invocation Since remote methods include java.rmi.Remote

Demurjian, Steven A.

324

Title, Location, Document Number Estimated Cost Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moody to Lev, SUBJECT: NEPA 2012 APS for DOE-SRS, Dated: JAN 25 2012 Moody to Lev, SUBJECT: NEPA 2012 APS for DOE-SRS, Dated: JAN 25 2012 Title, Location, Document Number Estimated Cost Description EA Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain FONSI: uncertain EA Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain FONSI: uncertain Total Estimated Cost $65,000 Annual NEPA Planning Summary NEPA Reviews of Proposals to Implement Enterprise SRS Initiatives unknown The Savannah River Site Strategic Plan for 2011 - 2015 describes 12 initiatives that Enterprise SRS will pursue by applying SRS's management core competencies in nuclear materials. Implementation of new missions resulting from this effort will likely require NEPA review. However, until firm proposals are developed

325

Location of hydraulic fractures using microseismic techniques  

DOE Green Energy (OSTI)

Microearthquakes with magnitudes ranging between -6 and -2 have been observed in three successive massive injections of water at the Hot Dry Rock Geothermal Energy demonstration site at Fenton Hill, New Mexico. The injection was part of a program to increase the heat transfer area of hydraulic fractures and to decrease the flow-through impedance between wells. The microearthquakes were used in mapping the location of the extended hydraulic fractures. A downhole triaxial system positioned approximately 200 m vertically above the injection point in a shut-in production well was used for detection. The microearthquakes occurred in a north-northwest striking zone 400 m in length passing through the injection point. During a third substantially larger injection, microearthquakes occurred in a dispersed volume at distances as great as 800 m from the zone active in the first two injections.

Albright, J.A.; Pearson, C.F.

1980-01-01T23:59:59.000Z

326

Definition: Remote Sensing Techniques | Open Energy Information  

Open Energy Info (EERE)

Remote Sensing Techniques Remote Sensing Techniques Jump to: navigation, search Dictionary.png Remote Sensing Techniques Remote sensing utilizes satellite and/or airborne based sensors to collect information about a given object or area. Remote sensing data collection methods can be passive or active. Passive sensors (e.g., spectral imagers) detect natural radiation that is emitted or reflected by the object or area being observed. In active remote sensing (e.g., radar) energy is emitted and the resultant signal that is reflected back is measured.[1] View on Wikipedia Wikipedia Definition Remote sensing is the acquisition of information about an object or phenomenon without making physical contact with the object. In modern usage, the term generally refers to the use of aerial sensor technologies

327

CoercionCoercion--Resistant RemoteResistant Remote Voting Using Decryption MixesVoting Using Decryption Mixes  

E-Print Network (OSTI)

-Resistant Remote Voting 12 Ballot HandlingBallot Handling · Problem: LHS+onion of ballot reveals too much ­ MustCoercionCoercion--Resistant RemoteResistant Remote Voting Using Decryption MixesVoting Using September 16, 2005 Clarkson and Myers: Coercion-Resistant Remote Voting 2 Remote VotingRemote Voting · Clear

Schoenmakers, Berry

328

Characterization of the Old Hydrofracture Facility (OHF) waste tanks located at ORNL  

SciTech Connect

The Old Hydrofracture Facility (OHF) is located in Melton Valley within Waste Area Grouping (WAG) 5 and includes five underground storage tanks (T1, T2, T3, T4, and T9) ranging from 13,000 to 25,000 gal. capacity. During the period of 1996--97 there was a major effort to re-sample and characterize the contents of these inactive waste tanks. The characterization data summarized in this report was needed to address waste processing options, examine concerns dealing with the performance assessment (PA) data for the Waste Isolation Pilot Plant (WIPP), evaluate the waste characteristics with respect to the waste acceptance criteria (WAC) for WIPP and Nevada Test Site (NTS), address criticality concerns, and to provide the data needed to meet DOT requirements for transporting the waste. This report discusses the analytical characterization data collected on both the supernatant and sludge samples taken from three different locations in each of the OHF tanks. The isotopic data presented in this report supports the position that fissile isotopes of uranium ({sup 233}U and {sup 235}U) do not satisfy the denature ratios required by the administrative controls stated in the ORNL LLLW waste acceptance criteria (WAC). The fissile isotope of plutonium ({sup 239}Pu and {sup 241}Pu) are diluted with thorium far above the WAC requirements. In general, the OHF sludge was found to be hazardous (RCRA) based on total metal content and the transuranic alpha activity was well above the 100 nCi/g limit for TRU waste. The characteristics of the OHF sludge relative to the WIPP WAC limits for fissile gram equivalent, plutonium equivalent activity, and thermal power from decay heat were estimated from the data in this report and found to be far below the upper boundary for any of the remote-handled transuranic waste (RH-TRU) requirements for disposal of the waste in WIPP.

Keller, J.M.; Giaquinto, J.M.; Meeks, A.M.

1997-04-01T23:59:59.000Z

329

Vacuum State/Refiner/Location  

U.S. Energy Information Administration (EIA) Indexed Site

Vacuum Vacuum State/Refiner/Location Barrels per Atmospheric Crude Oil Distillation Capacity Barrels per Operating Idle Operating Idle Downstream Charge Capacity Thermal Cracking Delayed Fluid Coking Visbreaking Other/Gas Calendar Day Stream Day Distillation Coking Oil Table 3. Capacity of Operable Petroleum Refineries by State as of January 1, 2013 (Barrels per Stream Day, Except Where Noted) ......................................................... Alabama 120,100 0 130,000 0 48,000 32,000 0 0 0 Goodway Refining LLC 4,100 0 5,000 0 0 0 0 0 0 ....................................................................................................................................................................................................

330

Renewable Energy Co-Location of Distribution Facilities (Virginia) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Co-Location of Distribution Facilities (Virginia) Co-Location of Distribution Facilities (Virginia) Renewable Energy Co-Location of Distribution Facilities (Virginia) < Back Eligibility Commercial Construction Developer Fuel Distributor Industrial Installer/Contractor Investor-Owned Utility Local Government Municipal/Public Utility Rural Electric Cooperative Systems Integrator Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Virginia Program Type Siting and Permitting Provider Virginia State Corporation Commission This legislation applies to distribution facilities, which include poles and wires, cables, pipelines, or other underground conduits by which a renewable generator is able to (i) supply electricity generated at its

331

Fuel cell power systems for remote applications. Phase 1 final report and business plan  

DOE Green Energy (OSTI)

The goal of the Fuel Cell Power Systems for Remote Applications project is to commercialize a 0.1--5 kW integrated fuel cell power system (FCPS). The project targets high value niche markets, including natural gas and oil pipelines, off-grid homes, yachts, telecommunication stations and recreational vehicles. Phase 1 includes the market research, technical and financial analysis of the fuel cell power system, technical and financial requirements to establish manufacturing capability, the business plan, and teaming arrangements. Phase 1 also includes project planning, scope of work, and budgets for Phases 2--4. The project is a cooperative effort of Teledyne Brown Engineering--Energy Systems, Schatz Energy Research Center, Hydrogen Burner Technology, and the City of Palm Desert. Phases 2 through 4 are designed to utilize the results of Phase 1, to further the commercial potential of the fuel cell power system. Phase 2 focuses on research and development of the reformer and fuel cell and is divided into three related, but potentially separate tasks. Budgets and timelines for Phase 2 can be found in section 4 of this report. Phase 2 includes: Task A--Develop a reformate tolerant fuel cell stack and 5 kW reformer; Task B--Assemble and deliver a fuel cell that operates on pure hydrogen to the University of Alaska or another site in Alaska; Task C--Provide support and training to the University of Alaska in the setting up and operating a fuel cell test lab. The Phase 1 research examined the market for power systems for off-grid homes, yachts, telecommunication stations and recreational vehicles. Also included in this report are summaries of the previously conducted market reports that examined power needs for remote locations along natural gas and oil pipelines. A list of highlights from the research can be found in the executive summary of the business plan.

NONE

1998-02-01T23:59:59.000Z

332

Remote vacuum or pressure sealing device and method for critical isolated systems  

DOE Patents (OSTI)

A remote vacuum or pressure sealing apparatus and method for making a radiation tolerant, remotely prepared seal that maintains a vacuum or pressure tight seal throughout a wide temperature range. The remote sealing apparatus includes a fixed threaded sealing surface on an isolated system, a gasket, and an insert consisting of a plug with a protruding sample holder. An insert coupling device, provided for inserting samples within the isolated system, includes a threaded fastener for cooperating with the fixed threaded sealing surface on the isolated system. The insert coupling device includes a locating pin for azimuthal orientation, coupling pins, a tooted coaxial socket wrench, and an insert coupling actuator for actuating the coupling pins. The remote aspect of the sealing apparatus maintains the isolation of the system from the user's environment, safely preserving the user and the system from detrimental effect from each respectively.

Brock, James David (Newport News, VA); Keith, Christopher D. (Newport News, VA)

2012-07-10T23:59:59.000Z

333

Conference Center and APS Site Activity Coordination  

NLE Websites -- All DOE Office Websites (Extended Search)

and Emergency Management Database Maintenance Personnel Conference Center and APS Site Activity Coordination Locations Conference Center - E1100E1200, Auditorium, Gallery A1100...

334

Surface based remote sensing of aerosol-cloud interactions  

NLE Websites -- All DOE Office Websites (Extended Search)

Surface based remote sensing of aerosol-cloud interactions Surface based remote sensing of aerosol-cloud interactions Feingold, Graham NOAA/Environmental Technology Laboratory Frisch, Shelby NOAA/Environmental Technology Laboratory Min, Qilong State University of New York at Albany Category: Cloud Properties We will present an analysis of the effect of aerosol on clouds at the Southern Great Plains ARM site. New methods for retrieving cloud droplet effective radius with radar (MMCR), multifilter rotating shadowband radiometer (MFRSR), and microwave radiometer (MWR) will be discussed. Relationships based on adiabatic clouds will be used to constrain retrievals. We will investigate the use of a range of proxies for cloud condensation nuclei, ranging from surface measurements of light scattering and accumulation mode number concentration, to lidar-measured extinction or

335

Remote System Technologies for Deactivating Hanford Hot Cells  

Science Conference Proceedings (OSTI)

Remote system technologies are being deployed by Fluor Hanford to help accelerate the deactivation of highly-radioactive hot cell facilities. These technologies offer improved methods for accessing difficult-to-reach spaces and performing tasks such as visual inspection, radiological characterization, decontamination, waste handling, and size reduction. This paper is focused on the application of remote systems in support of deactivation work being performed in several legacy facilities at Hanford (i.e., the 324 and 327 Buildings). These facilities were previously used for fuel fabrication, materials examination, and the development of waste treatment processes. The technologies described in this paper represent significant improvements to Hanford's baseline methods, and may offer benefits to other U.S. Department of Energy (DOE) sites and commercial operations.

Berlin, G.; Walton, T.

2003-02-25T23:59:59.000Z

336

Virtual Design and Modeling of Various Manufacturing Processes for Remote . . .  

E-Print Network (OSTI)

As currently envisioned, over 70,000 tons of high-level nuclear waste would be stored inside the planned Yucca Mountain repository. After emplacement, the site must be maintained and guarded for over 10,000 years. The reprocessing of spent nuclear fuel is a possible alternative to geological storage. Here, depleted Uranium would be separated from Plutonium and Minor Actinides. While Plutonium can be burned in commercial nuclear reactors, the minor actinides would be transmuted into other elements. The large-scale deployment of remote fabrication and refabrication processes (approx. 100 tons of Minor Actinides (MA) annually) will be required. Process automation has the potential to decrease the cost of remote fuel fabrication and to make transmutation a more economically viable process. Reprocessing and transmutation would reduce the high-level waste volume by over 99%, and reduce the lifetime of the repository to approximately 300 years. The objective of this thesis is the virtual design and simulation of manufacturing

Jamil Mohamad Renno

2005-01-01T23:59:59.000Z

337

Major DOE Biofuels Project Locations  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Biofuels Biofuels Project Locations Pacific Ethanol (Boardman, OR) BlueFire Ethanol (Corona, CA) POET (Emmetsburg, IA) Lignol Innovations (Commerce City, CO) ICM (St. Joseph, MO) Abengoa (Hugoton, KS) DOE Joint Bioenergy Institute (Berkeley, CA) DOE Great Lakes Bioenergy Research Center (Madison, WI) DOE Bioenergy Science Center (Oak Ridge, TN) NewPage (Wisconsin Rapids, WI) Range Fuels (Soperton, GA) DSM Innovation Center (Parsippany, NJ) Novozymes (Davis, CA) Genencor (Palo Alto, CA) Verenium Corp (San Diego, CA) Dupont (Wilmington, DE) Mascoma (Lebanon, NH) Cargill Inc (Minneapolis, MN) Regional Partnerships South Dakota State University, Brookings, SD Cornell University, Ithaca, NY University of Tennessee, Knoxville, TN Oklahoma State University, Stillwater, OK Oregon State University, Corvallis, OR

338

MOLTEN CARBONATE FUEL CELL POWER PLANT LOCATED AT LADWP MAIN STREET SERVICE CENTER  

DOE Green Energy (OSTI)

The Los Angeles Department of Water and Power (LADWP) has developed one of the most recognized fuel cell demonstration programs in the United States. In addition to their high efficiencies and superior environmental performance, fuel cells and other generating technologies that can be located at or near the load, offers several electric utility benefits. Fuel cells can help further reduce costs by reducing peak electricity demand, thereby deferring or avoiding expenses for additional electric utility infrastructure. By locating generators near the load, higher reliability of service is possible and the losses that occur during delivery of electricity from remote generators are avoided. The potential to use renewable and locally available fuels, such as landfill or sewage treatment waste gases, provides another attractive outlook. In Los Angeles, there are also many oil producing areas where the gas by-product can be utilized. In June 2000, the LADWP contracted with FCE to install and commission the precommercial 250kW MCFC power plant. The plant was delivered, installed, and began power production at the JFB in August 2001. The plant underwent manufacturer's field trials up for 18 months and was replace with a commercial plant in January 2003. In January 2001, the LADWP contracted with FCE to provide two additional 250kW MCFC power plants. These commercial plants began operations during mid-2003. The locations of these plants are at the Terminal Island Sewage Treatment Plant at the Los Angeles Harbor (for eventual operation on digester gas) and at the LADWP Main Street Service Center east of downtown Los Angeles. All three carbonate fuel cell plants received partial funding through the Department of Defense's Climate Change Fuel Cell Buydown Program. This report covers the technical evaluation and benefit-cost evaluation of the Main Street 250kW MCFC power plant during its first year of operation from September 2003 to August 2004. The data for the month of September 2004 was not available at the time this report was prepared. An addendum to this report will be prepared and transmitted to the Department of Energy once this data becomes available. This fuel cell power plant was originally intended to be installed at an American Airlines facility located at Los Angeles International Airport, however, due to difficulties in obtaining a site, the plant was ultimately installed at the LADWP's Distributed Generation Test Facility at it's Main Street Service Center.

William W. Glauz

2004-09-10T23:59:59.000Z

339

The LHCb Vertex Locator performance and Vertex Locator upgrade  

E-Print Network (OSTI)

LHCb is an experiment dedicated to the study of new physics in the decays of beauty and charm hadrons at the Large Hadron Collider (LHC) at CERN. The Vertex Locator (VELO) is the silicon detector surrounding the LHCb interaction point. The detector operates in a severe and highly non-uniform radiation environment. The small pitch and analogue readout result in a best single hit precision of 4 $\\rm \\mu$m. The upgrade of the LHCb experiment, planned for 2018, will transform the entire readout to a trigger-less system operating at 40 MHz event rate. The vertex detector will have to cope with radiation levels up to 10$^{16}$ 1 MeV$\\rm n_{eq}/cm^2$, more than an order of magnitude higher than those expected at the current experiment. A solution is under development with a pixel detector, based on the Timepix/Medipix family of chips with 55 x 55 $\\rm \\mu m$ pixels. In addition a micro-strip solution is also under development, with finer pitch, higher granularity and lower mass than the current detector. The current status of the VELO will be described together with recent testbeam results.

Pablo Rodrguez Prez; for the LHCb VELO Group; for the VELO Upgrade group

2012-09-21T23:59:59.000Z

340

State of New Mexico Issues Permit For Remote-Handled Waste at WIPP |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of New Mexico Issues Permit For Remote-Handled Waste at WIPP of New Mexico Issues Permit For Remote-Handled Waste at WIPP State of New Mexico Issues Permit For Remote-Handled Waste at WIPP October 16, 2006 - 1:35pm Addthis Enables DOE to Permanently Move Waste to the WIPP Repository for Safe Disposal CARLSBAD, NM - U.S. Department of Energy (DOE) today announced that the New Mexico Environment Department (NMED) issued a revised hazardous waste facility permit for DOE's Waste Isolation Pilot Plant (WIPP) in Carlsbad, New Mexico. The revised permit enables WIPP to receive and dispose of remote-handled (RH) transuranic (TRU) radioactive waste currently stored at DOE clean-up sites across the country. WIPP expects to receive its first RH-TRU waste shipment in the coming months, as soon as the regulatory approvals are obtained.

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

TWP Darwin Site  

NLE Websites -- All DOE Office Websites (Extended Search)

Darwin Site Darwin Site TWP Related Links Facilities and Instruments Manus Island Nauru Island Darwin, AUS ES&H Guidance Statement Operations Science Field Campaigns Year of Tropical Convection Visiting the Site TWP Fact Sheet Images Information for Guest Scientists Contacts TWP Darwin Site Location: 12° 25' 28.56" S, 130° 53' 29.75" E Altitude: 29.9 meters The third TWP climate research facility was established in April 2002 in Darwin, Northern Territory, Australia. The facility is situated adjacent to the Australian Bureau of Meteorology's (BOM) Meteorological Office near Darwin International Airport. Darwin was chosen because it meets the scientific goal of the ARM Program, providing a unique set of climate regimes that are not seen at the other TWP facilities. Annually, Darwin

342

Site Energy Reduction Program  

E-Print Network (OSTI)

DuPonts Sabine River Works site is the largest energy consuming location within DuPont. In the year 2000, each production area was encouraged to reduce energy costs. By 2003 site energy consumption was down 16% on an absolute basis and 12% on a BTU/LB basis. By 2004, overall progress had slowed, energy consumption increased slightly, and area results were mixed. It was time to shake things up with a new perspective. A coordinated site energy program was launched. In 2005, the first full year of the unified program, the site saved $6.9 MM from energy reduction projects. The rate of improvement is accelerating in 2006 with $3.6 MM in energy projects being implemented in the first four months.

Jagen, P. R.

2007-01-01T23:59:59.000Z

343

Data Quality Objectives Supporting Radiological Air Emissions Monitoring for the PNNL Site  

Science Conference Proceedings (OSTI)

Pacific Northwest National Laboratory (PNNL) is in the process of developing a radiological air monitoring program for the PNNL Site that is distinct from that of the nearby Hanford Site. The original DQO (PNNL-19427) considered radiological emissions at the PNNL Site from Physical Sciences Facility (PSF) major emissions units. This first revision considers PNNL Site changes subsequent to the implementation of the original DQO. A team was established to determine how the PNNL Site changes would continue to meet federal regulations and address guidelines developed to monitor air emissions and estimate offsite impacts of radioactive material operations. The result is an updated program to monitor the impact to the public from the PNNL Site. The team used the emission unit operation parameters and local meteorological data as well as information from the PSF Potential-to-Emit documentation and Notices of Construction submitted to the Washington State Department of Health (WDOH). The locations where environmental monitoring stations would most successfully characterize the maximum offsite impacts of PNNL Site emissions from the three PSF buildings with major emission units were determined from these data. Three monitoring station locations were determined during the original revision of this document. This first revision considers expanded Department of Energy operations south of the PNNL Site and relocation of the two offsite, northern monitoring stations to sites near the PNNL Site fenceline. Inclusion of the southern facilities resulted in the proposal for a fourth monitoring station in the southern region. The southern expansion added two minor emission unit facilities and one diffuse emission unit facility. Relocation of the two northern stations was possible due to the use of solar power, rather than the previous limitation of the need for access to AC power, at these more remote locations. Addendum A contains all the changes brought about by the revision 1 considerations. This DQO report also updates the discussion of the Environmental Monitoring Plan for the PNNL Site air samples and how existing Hanford Site monitoring program results could be used. This document of Data Quality Objectives (DQOs) was prepared based on the U.S. Environmental Protection Agency (EPA) Guidance on Systematic Planning Using the Data Quality Objectives Process, EPA, QA/G4, 2/2006 (EPA 2006) as well as several other published DQOs.

Barnett, J. M.; Meier, Kirsten M.; Snyder, Sandra F.; Fritz, Brad G.; Poston, Theodore M.; Antonio, Ernest J.

2012-11-12T23:59:59.000Z

344

High Level Waste Remote Handling Equipment in the Melter Cave Support Handling System at the Hanford Waste Treatment Plant  

SciTech Connect

Cold war plutonium production led to extensive amounts of radioactive waste stored in tanks at the Department of Energy's (DOE) Hanford site. Bechtel National, Inc. is building the largest nuclear Waste Treatment Plant in the world located at the Department of Energy's Hanford site to immobilize the millions of gallons of radioactive waste. The site comprises five main facilities; Pretreatment, High Level Waste vitrification, Low Active Waste vitrification, an Analytical Lab and the Balance of Facilities. The pretreatment facilities will separate the high and low level waste. The high level waste will then proceed to the HLW facility for vitrification. Vitrification is a process of utilizing a melter to mix molten glass with radioactive waste to form a stable product for storage. The melter cave is designated as the High Level Waste Melter Cave Support Handling System (HSH). There are several key processes that occur in the HSH cell that are necessary for vitrification and include: feed preparation, mixing, pouring, cooling and all maintenance and repair of the process equipment. Due to the cell's high level radiation, remote handling equipment provided by PaR Systems, Inc. is required to install and remove all equipment in the HSH cell. The remote handling crane is composed of a bridge and trolley. The trolley supports a telescoping tube set that rigidly deploys a TR 4350 manipulator arm with seven degrees of freedom. A rotating, extending, and retracting slewing hoist is mounted to the bottom of the trolley and is centered about the telescoping tube set. Both the manipulator and slewer are unique to this cell. The slewer can reach into corners and the manipulator's cross pivoting wrist provides better operational dexterity and camera viewing angles at the end of the arm. Since the crane functions will be operated remotely, the entire cell and crane have been modeled with 3-D software. Model simulations have been used to confirm operational and maintenance functional and timing studies throughout the design process. Since no humans can go in or out of the cell, there are several recovery options that have been designed into the system including jack-down wheels for the bridge and trolley, recovery drums for the manipulator hoist, and a wire rope cable cutter for the slewer jib hoist. If the entire crane fails in cell, the large diameter cable reel that provides power, signal, and control to the crane can be used to retrieve the crane from the cell into the crane maintenance area. (authors)

Bardal, M.A. [PaR Systems, Inc., Shoreview, MN (United States); Darwen, N.J. [Bechtel National, Inc., Richland, WA (United States)

2008-07-01T23:59:59.000Z

345

Remote Inspection, Measurement and Handling for LHC  

E-Print Network (OSTI)

Personnel access to the LHC tunnel will be restricted to varying extents during the life of the machine due to radiation, cryogenic and pressure hazards. The ability to carry out visual inspection, measurement and handling activities remotely during periods when the LHC tunnel is potentially hazardous offers advantages in terms of safety, accelerator down time, and costs. The first applications identified were remote measurement of radiation levels at the start of shut-down, remote geometrical survey measurements in the collimation regions, and remote visual inspection during pressure testing and initial machine cool-down. In addition, for remote handling operations, it will be necessary to be able to transmit several real-time video images from the tunnel to the control room. The paper describes the design, development and use of a remotely controlled vehicle to demonstrate the feasibility of meeting the above requirements in the LHC tunnel. Design choices are explained along with operating experience to-dat...

Kershaw, K; Coin, A; Delsaux, F; Feniet, T; Grenard, J L; Valbuena, R

2007-01-01T23:59:59.000Z

346

Alaska Open-file Report 144 Assessment of Thermal Springs Sites Aleutian Arc, Atka Island to Becherof Lake -- Preliminary Results and Evaluation  

DOE Green Energy (OSTI)

Twenty of more than 30 thermal spring areas reported to exist in the Aleutian arc extending from Atka Island to Becherof Lake were investigated during July and August, 1980. Thermal activity of three of these sites had diminished substantially or no longer existed. At least seven more sites where thermal-spring activity is probable or certain were not visited because of their remoteness or because of time constraints. The existence of several other reported thermal spring sites could not be verified; these sites are considered questionable. On the basis of geothermometry, subsurface reservoir temperatures in excess of 150 C are estimated for 10 of the thermal spring sites investigated. These sites all occur in or near regions of Recent volcanism. Five of the sites are characterized by fumaroles and steaming ground, indicating the presence of at least a shallow vapor-dominated zone. Two, the Makushin Valley and Glacier Valley thermal areas, occur on the flanks of active Mukushin Volcano located on Unalaska Island, and may be connected to a common source of heat. Gas geothermometry suggests that the reservoir feeding the Kliuchef thermal field, located on the flanks of Kliuchef volcano of northeast Atka Island, may be as high as 239 C.

Motyka, R.J.; Moorman, M.A.; Liss, S.A.

1981-12-01T23:59:59.000Z

347

Proceedings: Remote Monitoring Technology 2008 Workshop  

Science Conference Proceedings (OSTI)

This report provides information from the Remote Monitoring Technology Working Group meeting, held in September 2008. The meeting focused on an update of a number of recent technical developments in Remote Monitoring Technology (RMT). Utility attendees also detailed RMT system purchases, deployment and operation of remote monitoring equipment. EPRI intended the broad scope of the meeting to facilitate a discussion of important industry experiences ranging from the initial design and procurement of system...

2009-07-31T23:59:59.000Z

348

PPPL Site Environmental Report  

SciTech Connect

Contained in the following report are data for radioactivity in the environment collected and analyzed by Princeton Plasma Physics Laboratorys Princeton Environmental, Analytical, and Radiological Laboratory (PEARL). The PEARL is located on?site and is certified for analyzing radiological and non?radiological parameters through the New Jersey Department of Environmental Protections Laboratory Certification Program, Certification Number 12471. Non?radiological surface and ground water samples are analyzed by NJDEP certified subcontractor laboratories QC, Inc. and Accutest Laboratory. To the best of our knowledge, these data, as contained in the Annual Site Environmental Report for 2011, are documented and certified to be correct.

Virginia Finley, Robeert Sheneman and Jerry Levine

2012-12-21T23:59:59.000Z

349

Transcript - "Millimeter-Wave Remote Biometric Identification...  

NLE Websites -- All DOE Office Websites (Extended Search)

can be rapidly deployed for security screening, health of soldiers in battlefield and disaster rescue efforts... Transcript of Video Our product enables remote wireless...

350

Remote Access of Computer Controlled Experiments.  

E-Print Network (OSTI)

??In this paper, we present a way for students to access and operate laboratory equipment, controlled by a laboratory computer via a remote access program. (more)

Nilsson, Kristian; Zackrisson, Johan

2008-01-01T23:59:59.000Z

351

Remote Sensing Ayman F. Habib Data Acquisition Systems  

E-Print Network (OSTI)

Remote Sensing Ayman F. Habib 1 Chapter 3 Data Acquisition Systems #12;Remote Sensing Ayman F. ­ Electro-mechanical scanners. #12;Remote Sensing Ayman F. Habib 3 Overview · LIDAR operational principles for recognition and classification purposes. #12;Remote Sensing Ayman F. Habib 4 Remote Sensing Systems Utilized

Habib, Ayman

352

Remote Sensing Ayman F. Habib Image Registration & Rectification  

E-Print Network (OSTI)

Remote Sensing Ayman F. Habib 1 Chapter 5 Image Registration & Rectification #12;Remote Sensing: Resampling techniques. #12;Remote Sensing Ayman F. Habib 3 Image Registration #12;Remote Sensing Ayman F be integrated/fused. Object Space Left Image Right Image Image Registration: Objective #12;Remote Sensing Ayman

Habib, Ayman

353

Remote Sensing Ayman F. Habib Image Registration & Rectification  

E-Print Network (OSTI)

1 Remote Sensing Ayman F. Habib 1 Chapter 5 Image Registration & Rectification Remote Sensing Ayman: Resampling techniques. #12;2 Remote Sensing Ayman F. Habib 3 Image Registration Remote Sensing Ayman F. Habib be integrated/fused. Object Space Left Image Right Image Image Registration: Objective #12;3 Remote Sensing

Habib, Ayman

354

18 IEEE Geoscience and Remote Sensing Society Newsletter September 2011 International Geoscience and Remote Sensing Symposium,  

E-Print Network (OSTI)

18 IEEE Geoscience and Remote Sensing Society Newsletter · September 2011 International Geoscience and Remote Sensing Symposium, Honolulu, Hawai'i: IEEE, 2000. [27] R. K. Raney, "Hybrid-Polarity SAR Architecture," in CD-ROM Proceedings, IEEE International and Geoscience Remote Sensing Symposium IGARSS, Denver

Fischlin, Andreas

355

Survey of remote data monitoring systems  

DOE Green Energy (OSTI)

A self-contained data-logger device called an SDAS (Site Data Acquisition Subsystem) was built for the National Solar Data Network (NSDN) which could collect analog data from 96 channels, store the data for up to three days, and then transmit the stored data on request to a central facility by voice-grade telephone lines. This system has worked fairly well for the eight years that it has been in service. However, the design and components are getting old and newer dataloggers may be more reliable and accurate and less expensive. This report discusses the results of an extensive search for an SDAS replacement. The survey covered 62 models from 36 manufacturers. These numbers are not indicative of all the dataloggers or manufacturers available, but only those which appeared to have some qualifications for the NSDN datalogger replacement. This report views the datalogger as a system which is made up of sensors, a data acquisition and storage unit, a telecommunications subsystem, and a data processing subsystem. Therefore, there is a section on sensors used in the NSDN, telecommunications technology, and data processing requirements. These four components or subsystems are all necessary in order to have an integrated, successful remote data monitoring network.

Logee, T.L.; Kendall, P.W.; Pollock, E.O.; Raymond, M.G.; Knapp, R.C. Jr.

1984-09-01T23:59:59.000Z

356

PARSII - New Reports and Reports With New Reporting Folder Location  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PARSII - New Reports and Reports With New Reporting Folder Location PARSII - New Reports and Reports With New Reporting Folder Location Page 1 of 3 as of 1/24/2011 Report Name Previous Location New Location Brief Description Multi-Project or Single Project Report 2A Project Summary by Program PARS Reports Monthly Reports All active projects listing Pre/Post CD-2 $ and #'s including RYG status. Multi-Project 3A Red-Yellow Project Status Report PARS Reports Monthly Reports For every project that has been assessed by the OECM Analyst as being either Red or Yellow a worksheet is created that includes the OECM Analyst's written assessment of the project. The FPD, Site and Contractor with its EVM Certification Status are listed in the report. All appropriate EVM metrics, TPC values and CD approved dates as of the current OA Status Date are a part of the report.

357

Mobile robotic surveying performance for planetary surface site characterization  

Science Conference Proceedings (OSTI)

Robotic systems will perform mobile surveys for scientific and engineering purposes as part of future missions on lunar and planetary surfaces. With site characterization as a task objective various system configurations and surveying techniques are ... Keywords: area coverage performance, in-situ remote sensing, planetary surface exploration, robotic surveying, site characterization

Edward Tunstel

2008-08-01T23:59:59.000Z

358

Application of microseismic technology to hydraulic fracture diagnostics: GRI/DOE Field Fracturing Multi-Sites Project  

SciTech Connect

The objective of the Field Fracturing Multi-Sites Project (M-Site) is to conduct field experiments and analyze data that will result in definitive determinations of hydraulic fracture dimensions using remote well and treatment well diagnostic techniques. In addition, experiments will be conducted to provide data that will resolve significant unknowns with regard to hydraulic fracture modeling, fracture fluid rheology and fracture treatment design. These experiments will be supported by a well-characterized subsurface environment as well as surface facilities and equipment conducive to acquiring high-quality data. It is anticipated that the project`s research advancements will provide a foundation for a fracture diagnostic service industry and hydraulic fracture optimization based on measured fracture response. The M-Site Project is jointly sponsored by the Gas Research Institute (GRI) and the US Department of Energy (DOE). The site developed for M-Site hydraulic fracture experimentation is the former DOE Multiwell Experiment (MWX) site located near Rifle, Colorado. The MWX project drilled three closely-spaced wells (MWX-1, MWX-2 and MWX-3) which were the basis for extensive reservoir analyses and tight gas sand characterizations in the blanket and lenticular sandstone bodies of the Mesaverde Group. The research results and background knowledge gained from the MWX project are directly applicable to research in the current M-Site Project.

Wilmer, R. [CER Corp., Las Vegas, NV (United States); Warpinski, N.R. [Sandia National Laboratories (United States); Wright, T.B. [Resources Engineering Systems (United States); Branagan, P.T. [Branagan & Associates (United States); Fix, J.E. [Fix & Associates (United States)

1995-06-01T23:59:59.000Z

359

Remotely readable fiber optic compass  

DOE Patents (OSTI)

A remotely readable fiber optic compass. A sheet polarizer is affixed to a magnet rotatably mounted in a compass body, such that the polarizer rotates with the magnet. The optical axis of the sheet polarizer is preferably aligned with the north-south axis of the magnet. A single excitation light beam is divided into four identical beams, two of which are passed through the sheet polarizer and through two fixed polarizing sheets which have their optical axes at right angles to one another. The angle of the compass magnet with respect to a fixed axis of the compass body can be determined by measuring the ratio of the intensities of the two light beams. The remaining ambiguity as to which of the four possible quadrants the magnet is pointing to is resolved by the second pair of light beams, which are passed through the sheet polarizer at positions which are transected by two semicircular opaque strips formed on the sheet polarizer. The incoming excitation beam and the four return beams are communicated by means of optical fibers, giving a remotely readable compass which has no electrical parts.

Migliori, A.; Swift, G.W.; Garrett, S.L.

1985-04-30T23:59:59.000Z

360

Siting Handbook WIND ENERGY SITING HANDBOOK  

E-Print Network (OSTI)

This Wind Energy Siting Handbook (the "Handbook") presents general information about regulatory and environmental issues associated with the development and siting of wind energy projects in the United States. It is intended to be a general guidance document providing technical information and tools for identifying potential issues that may arise with wind energy projects. The Handbook contains links to resources on the Internet. Those links are provided solely as aids to assist you in locating other Internet resources that may be of interest. They are not intended to state or imply that AWEA or the Contributors endorse, approve, sponsor, or are affiliated or associated with those linked sites. The Handbook is not intended as a comprehensive discussion of all wind energy project issues and should be used in conjunction with other available resources. The Handbook also is not intended as legal or environmental advice or as a best practices manual, nor should it be considered as such. Because the Handbook is only a general guidance document, independent legal counsel and/or environmental consulting services should be obtained to further explore any wind energy siting issue, matter, or project. In reviewing all or any part of the Handbook, you acknowledge and understand that the Handbook is only a general guidance document and does not constitute a best practices manual, legal or environmental advice, or a legal or other relationship with the American Wind Energy Association ("AWEA") or any of the persons or entities

unknown authors

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Remote Inspection Devices for Spent Reactor Enriched Uranium Fuel Elements  

SciTech Connect

A remote video inspection was developed and deployed in Argentina for the detailed inspection of highly radioactive spent reactor fuel (SNF) as a prerequisite to its shipment to the Savannah River Site (SRS) in the United States for long-term storage and disposition. The fuel is highly enriched uranium (HEU) spent assemblies dating from 1967 to 1989 and aluminum clad uranium-aluminum alloy of a typical material test reactor design. The specialized video system was designed for low cost, high portability, easy setup, and ease of usage, while accommodating the differing electrical systems (i.e. 110/60 Hz, 220/50 Hz) between the United States and Argentina.

Heckendorn, F.M.

2001-01-03T23:59:59.000Z

362

Draft Environmental Assessment on the Remote-handled Waste Disposition  

NLE Websites -- All DOE Office Websites (Extended Search)

Draft Environmental Assessment on the Remote-handled Waste Disposition Project available for public review and comment Draft Environmental Assessment on the Remote-handled Waste Disposition Project available for public review and comment The U.S. Department of Energy invites the public to review and comment on a draft environmental assessment that the Department issued today, for a proposal to process approximately 327 cubic meters of remote-handled waste currently stored at the Idaho National Laboratory. An additional five cubic meters of waste stored at the Hanford Site near Richland, Washington is also evaluated since it is reasonably foreseeable that a decision may be made in the future to send that waste to Idaho for treatment. The project is necessary to prepare the waste for legally-required disposal. Under the Department�s preferred alternative, workers would use sealed rooms called hot cells at the Idaho Nuclear Technology and Engineering Center (INTEC) to process the waste, treat it as necessary and repackage it so that it is ready for disposal. The document describes the modifications necessary to hot cells to perform the work.

363

Resource Allocation for Remote Desktop Sessions in Utility Grids  

E-Print Network (OSTI)

Emerging large scale utility computing systems such as Grids promise computing and storage to be provided to end users as a utility. System management services deployed in the middleware are a key to enabling this vision. Utility Grids provide a challenge in terms of scale, dynamism, and heterogeneity of resources and workloads. In this paper, we present a model based architecture for resource allocation services for Utility Grids. The proposed service is built in the context of interactive remote desktop session workloads and takes application performance QoS models into consideration. The key design guidelines are hierarchical request structure, application performance models, remote desktop session performance models, site admission control, multi-variable resource assignment system, and runtime session admission control. We have also built a simulation framework that can handle mixed batch and remote desktop session requests, and have implemented our proposed resource allocation service into the framework. We present some results from experiments done using the framework. Our proposed architecture for resource allocation services addresses the needs of emerging utility computing systems and captures the key concepts and guidelines for building such services in these environments.

Vanish Talwar; Bikash Agarwalla; Sujoy Basu; Raj Kumar; Klara Nahrstedt

2005-01-01T23:59:59.000Z

364

Environmental characterization of two potential locations at Hanford for a new production reactor  

Science Conference Proceedings (OSTI)

This report describes various environmental aspects of two areas on the Hanford Site that are potential locations for a New Production Reactor (NPR). The area known as the Skagit Hanford Site is considered the primary or reference site. The second area, termed the Firehouse Site, is considered the alternate site. The report encompasses an environmental characterization of these two potential NPR locations. Eight subject areas are covered: geography and demography; ecology; meteorology; hydrology; geology; cultural resources assessment; economic and social effects of station construction and operation; and environmental monitoring. 80 refs., 68 figs., 109 tabs.

Watson, E.C.; Becker, C.D.; Fitzner, R.E.; Gano, K.A.; Imhoff, K.L.; McCallum, R.F.; Myers, D.A.; Page, T.L.; Price, K.R.; Ramsdell, J.V.; Rice D.G.; Schreiber D.L.; Skumatz L.A.; Sommer D.J.; Tawil J.J.; Wallace R.W.; Watson D.G.

1984-09-01T23:59:59.000Z

365

Using Downhole Probes to Locate and Characterize Buried Transuranic and Mixed Low Level Waste  

Science Conference Proceedings (OSTI)

Borehole logging probes were developed and tested to locate and quantify transuranic elements in subsurface disposal areas and in contaminated sites at USDOE Weapons Complex sites. A new method of measuring very high levels of chlroine in the subsurface was developed using pulsed neutron technology from oilfield applications. The probes were demonstrated at the Hanford site in wells containing plutonium and other contaminants.

Steinman, Donald K; Bramblett, Richard L; Hertzog, Russel C

2012-06-25T23:59:59.000Z

366

Post Storm Damage Assessment and Vegetation Monitoring Using Remote Sensing Techniques  

Science Conference Proceedings (OSTI)

This report presents the results of an EPRI study of remote sensing technology as a tool for environmental monitoring and assessment along power line corridors and at utility systems and to view facilities damaged during storms. The report provides a technology overview, details application-oriented field studies at two sites, and offers conclusions and recommendations concerning existing and emerging technologies.

1998-12-28T23:59:59.000Z

367

The APO 3.5-meter remote observing program--2002 and beyond Bruce Gillespie*  

E-Print Network (OSTI)

The APO 3.5-meter remote observing program--2002 and beyond Bruce Gillespie* Site Operations Manager, Apache Point Observatory ABSTRACT The Apache Point Observatory 3.5-meter telescope is a working operational models. Keywords: Astrophysical Research Consortium, Apache Point Observatory, 3.5-meter telescope

Castillo, Steven P.

368

U-129: RSA enVision Bugs Permit Cross-Site Scripting, SQL Injection, and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9: RSA enVision Bugs Permit Cross-Site Scripting, SQL 9: RSA enVision Bugs Permit Cross-Site Scripting, SQL Injection, and Directory Traversal Attacks U-129: RSA enVision Bugs Permit Cross-Site Scripting, SQL Injection, and Directory Traversal Attacks March 20, 2012 - 7:00am Addthis PROBLEM: RSA enVision Bugs Permit Cross-Site Scripting, SQL Injection, and Directory Traversal Attacks PLATFORM: 4.x, prior to 4.1 Patch 4 ABSTRACT: Several vulnerabilities were reported in RSA enVision. A remote user can access the system. A remote authenticated user can conduct cross-site scripting attacks. A remote authenticated user can inject SQL commands. A remote authenticated user can view files on the target system. Reference LINKS: SecurityTracker Alert ID: 1026819 CVE-2012-0403 IMPACT ASSESSMENT: High Discussion: The system does not properly filter HTML code from user-supplied input

369

Substation Security and Remote Access Implementation Strategies  

Science Conference Proceedings (OSTI)

This project analyzed control system remote access solutions in a side-by-side comparison. Five systems were lab-tested against common functions used by utilities to access and manage electronic control systems. The five vendors products met the basic remote access requirements tested.BackgroundElectronic control systems that actuate protective equipment and physical operations in the ...

2012-12-20T23:59:59.000Z

370

Neural maps in remote sensing image analysis  

Science Conference Proceedings (OSTI)

We study the application of self-organizing maps (SOMs) for the analyses of remote sensing spectral images. Advanced airborne and satellite-based imaging spectrometers produce very high-dimensional spectral signatures that provide key information to ... Keywords: generalized relevance learning vector quantization, image analysis, remote sensing, self-organizing map

Thomas Villmann; Erzsbet Mernyi; Barbara Hammer

2003-04-01T23:59:59.000Z

371

Indoor Sampler Siting  

NLE Websites -- All DOE Office Websites (Extended Search)

Indoor Sampler Siting Indoor Sampler Siting Title Indoor Sampler Siting Publication Type Conference Proceedings Year of Publication 2009 Authors Sohn, Michael D., and David M. Lorenzetti Conference Name 11th International Conference on Air Distribution in Rooms Conference Location Busan, Korea Abstract Contaminant releases in or near a building can lead to significant human exposures unless prompt response is taken. U.S. Federal and local agencies are implementing programs to place air-monitoring samplers in buildings to quickly detect biological agents. We describe a probabilistic algorithm for siting samplers in order to detect accidental or intentional releases of biological material. The algorithm maximizes the probability of detecting a release from among a suite of realistic scenarios. The scenarios may differ in any unknown, for example the release size or location, weather, mode of building operation, etc. The algorithm also can optimize sampler placement in the face of modeling uncertainties, for example the airflow leakage characteristics of the building, and the detection capabilities of the samplers. In anillustrative example, we apply the algorithm to a hypothetical 24-room commercial building, finding optimal networks for a variety of assumed sampler types and performance characteristics. We also discuss extensions of this work for detecting ambient pollutants in buildings, and for understanding building-wide airflow, pollutant dispersion, and exposures

372

Hanford Site  

NLE Websites -- All DOE Office Websites

Around the Site Current HMS Observations Daily HMS Extremes in Met Data Met and Climate Data Summary Products Contacts Hours Current NWS Forecast for the Tri-Cities NWS...

373

Building & Site Services Coordination  

NLE Websites -- All DOE Office Websites (Extended Search)

FAQs FAQs Conference Center and APS Site Activity Coordination Management and/or Coordination of APS Site Work/Services Safety & Emergency Management Database Maintenance Personnel Building and Site Services Coordination "We're at the End of our Pagers" The mission of the Building & Site Services Coordination is to efficiently manage and minimize the impact of APS building and site activities and to provide optimal support to APS staff and users in all 400 buildings and areas. FAQs Conference Center and APS Site Activity Coordination Locations Reservations Setups Visits & Tours Management and/or Coordination of APS Site Work/Services Work Entry Clearances Utility Shutdowns Telephone System Rigging Stockroom Office Furniture Installation Safety & Emergency Management

374

Modeling of Spectralon diffusers for radiometric calibration in remote sensing  

E-Print Network (OSTI)

Modeling of Spectralon diffusers for radiometric calibration in remote sensing G. Bazalgette Courre Abstract. Onboard calibration of radiometric measurements in remote sensing is often achieved for publication May 28, 2003. 1 Introduction Light diffusers are used in remote sensing applications

Sprik, Rudolf

375

Remote Sensing for Biodiversity Conservation of the Albertine Rift  

E-Print Network (OSTI)

183 10 Remote Sensing for Biodiversity Conservation of the Albertine Rift in Eastern Africa Samuel 2003). The rapidly developing field of remote sensing has been invaluable to biodiversity conservation...............................................................................................184 10.3 Remote Sensing of the Albertine Rift .....................................................185

Wang, Y.Q. "Yeqiao"

376

Multiple Instrument Distributed Aperture Sensor (MIDAS) For Planetary Remote Sensing  

E-Print Network (OSTI)

Multiple Instrument Distributed Aperture Sensor (MIDAS) For Planetary Remote Sensing Joe Pitman An innovative approach that enables greatly increased return from planetary science remote sensing missions as the primary remote sensing science payload, thereby reducing the cost, resources, complexity, integration

Marcus, Philip S.

377

Snowpack spatial variability: towards understanding its effect on remote sensing  

E-Print Network (OSTI)

Snowpack spatial variability: towards understanding its effect on remote sensing measurements spatial variability: towards understanding its effect on remote sensing mea- surements and snow slope large errors in these basin estimates. Remote sensing measurements offer a promising alternative, due

Marshall, Hans-Peter

378

Design of a Graphic Generator for Remote Terminal Application  

Science Conference Proceedings (OSTI)

The design of a graphic display system for remote terminal application is presented. Control data requirements are reduced by generating a useful set of graphic primitives locally at the remote terminals. Keywords: Computer graphics, digital differential analyzers, peripherals, remote terminals.

J. R. Armstrong

1973-05-01T23:59:59.000Z

379

Microsoft Word - Site Selection  

NLE Websites -- All DOE Office Websites (Extended Search)

Selection Selection One of the very first tasks of General Leslie Groves and the Manhattan Project in early 1943 was to locate and acquire sites in the United States where uranium and plutonium could be produced, as well as a site where the atomic bomb actually would be constructed. Production of uranium and plutonium required vast amounts of power. Thus, Oak Ridge, Tennessee, and Hanford, Washington, were chosen because of proximity to major rivers. Oak Ridge could draw on the power of the hydroelectric plants on the Tennessee River. Hanford could use the power from the Columbia River. The cold waters of the Columbia also could be used to cool the plutonium production reactors at Hanford. A third site, with

380

Preliminary Safety Design Report for Remote Handled Low-Level Waste Disposal Facility  

SciTech Connect

A new onsite, remote-handled low-level waste disposal facility has been identified as the highest ranked alternative for providing continued, uninterrupted remote-handled low-level waste disposal for remote-handled low-level waste from the Idaho National Laboratory and for nuclear fuel processing activities at the Naval Reactors Facility. Historically, this type of waste has been disposed of at the Radioactive Waste Management Complex. Disposal of remote-handled low-level waste in concrete disposal vaults at the Radioactive Waste Management Complex will continue until the facility is full or until it must be closed in preparation for final remediation of the Subsurface Disposal Area (approximately at the end of Fiscal Year 2017). This preliminary safety design report supports the design of a proposed onsite remote-handled low-level waste disposal facility by providing an initial nuclear facility hazard categorization, by discussing site characteristics that impact accident analysis, by providing the facility and process information necessary to support the hazard analysis, by identifying and evaluating potential hazards for processes associated with onsite handling and disposal of remote-handled low-level waste, and by discussing the need for safety features that will become part of the facility design.

Timothy Solack; Carol Mason

2012-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Addendum to the Closure Report for Corrective Action Unit 484: Surface Debris, Waste Sites, and Burn Area, Tonopah Test Range, Nevada (Revision 0)  

SciTech Connect

Corrective Action Unit (CAU) 484 Streamlined Approach for Environmental Restoration (SAFER) activities called for the identification and remediation of surface hot spot depleted uranium (DU) with some excavation to determine the vertical extent of contamination (NNSA/NSO, 2004). During the CAU 484 SAFER investigation (conducted November 2003 through August 2007), approximately 50 locations containing DU were identified on Antelope Lake. All but four locations (CA-1, SA-5-9, SA-12-15, and SA-4) were remediated. Figure 1-1 shows locations of the four use restriction (UR) sites. The four locations were determined to have failed the SAFER conceptual site model assumption of a small volume hot spot. Two of the locations (CA-1 and SA-5-9) were excavated to depths of 3.5 to 7 feet (ft) below ground surface (bgs), and a third location (SA-12-15) with a footprint of 30 by 60 ft was excavated to a depth of 0.5 ft. At the fourth site (SA-4), the discovery of unexploded ordnance (UXO) halted the excavation due to potential safety concerns. Remediation activities on Antelope Lake resulted in the removal of approximately 246 cubic yards (yd3) of DU-impacted soil from the four UR sites; however, Kiwi surveys confirmed that residual DU contamination remained at each of the four sites. (The Kiwi was a Remote Sensing Laboratory [RSL] vehicle equipped with a data-acquisition system and four sodium iodide gamma detectors. Surveys were conducted with the vehicle moving at a rate of approximately 10 miles per hour with the gamma detectors positioned 14 to 28 inches [in.] above the ground surface [NNSA/NSO, 2004]).

Mark Burmeister

2011-03-01T23:59:59.000Z

382

Three Dimensional, Integrated Characterization and Archival System for Remote Facility Contaminant Characterization  

DOE Green Energy (OSTI)

The largest problem facing the Department of Energy's Office of Environmental Management (EM) is the cleanup of the Cold War legacy nuclear production plants that were built and operated from the mid-forties through the late eighties. EM is now responsible for the remediation of no less than 353 projects at 53 sites across the country at, an estimated cost of $147 billion over the next 72 years. One of the keys to accomplishing a thorough cleanup of any site is a rigorous but quick contaminant characterization capability. If the contaminants present in a facility can be mapped accurately, the cleanup can proceed with surgical precision, using appropriate techniques for each contaminant type and location. The three dimensional, integrated characterization and archival system (3D-ICAS) was developed for the purpose of rapid, field level identification, mapping, and archiving of contaminant data. The system consists of three subsystems, an integrated work and operating station, a 3-D coherent laser radar, and a contaminant analysis unit. Target contaminants that can be identified include chemical (currently organic only), radiological, and base materials (asbestos). In operation, two steps are required. First, the remotely operable 3-D laser radar maps an area of interest in the spatial domain. Second, the remotely operable contaminant analysis unit maps the area of interest in the chemical, radiological, and base material domains. The resultant information is formatted for display and archived using an integrated workstation. A 3-D model of the merged spatial and contaminant domains cart be displayed along with a color-coded contaminant tag at each analysis point. In addition, all of the supporting detailed data are archived for subsequent QC checks. The 3D-ICAS system is capable of performing all contaminant characterization in a dwell time of 6 seconds. The radiological and chemical sensors operate at US Environmental Protection Agency regulatory levels. Base materials identification is accomplished using a molecular vibrational spectroscopy, which can identify materials such as asbestos, concrete, wood, or transite. The multipurpose sensor head is positioned robotically using a small CRS Robotics A465 arm, which is registered to the environment map by the 3-D laser radar.

Barry, R.E.; Gallman, P.; Jarvis, G.; Griffiths, P.

1999-04-25T23:59:59.000Z

383

System, method, and apparatus for remote measurement of terrestrial biomass  

DOE Patents (OSTI)

A system, method, and/or apparatus for remote measurement of terrestrial biomass contained in vegetative elements, such as large tree boles or trunks present in an area of interest, are provided. The method includes providing an airborne VHF radar system in combination with a LiDAR system, overflying the area of interest while directing energy toward the area of interest, using the VHF radar system to collect backscatter data from the trees as a function of incidence angle and frequency, and determining a magnitude of the biomass from the backscatter data and data from the laser radar system for each radar resolution cell. A biomass map is generated showing the magnitude of the biomass of the vegetative elements as a function of location on the map by using each resolution cell as a unique location thereon. In certain preferred embodiments, a single frequency is used with a linear array antenna.

Johnson, Patrick W (Jefferson, MD)

2011-04-12T23:59:59.000Z

384

Categorical Exclusion Determinations: Pacific Northwest Site Office |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Pacific Northwest Site Office Pacific Northwest Site Office Categorical Exclusion Determinations: Pacific Northwest Site Office Categorical Exclusion Determinations issued by Pacific Northwest Site Office. DOCUMENTS AVAILABLE FOR DOWNLOAD July 16, 2012 CX-009099: Categorical Exclusion Determination Routine Maintenance CX(s) Applied: B1.3, B1.4, B1.8, B1.16, B1.17 Date: 07/16/2012 Location(s): Washington Offices(s): Pacific Northwest Site Office June 28, 2012 CX-009097: Categorical Exclusion Determination U.S. Customs and Border Protection High-Energy Radiography Test Capability CX(s) Applied: B3.10, B3.11 Date: 06/28/2012 Location(s): Washington Offices(s): Pacific Northwest Site Office May 18, 2012 CX-009096: Categorical Exclusion Determination U.S. Customs and Border Protection Non-Intrusive Inspection Tests

385

Categorical Exclusion Determinations: Lawrence Livermore Site Office |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lawrence Livermore Site Lawrence Livermore Site Office Categorical Exclusion Determinations: Lawrence Livermore Site Office Categorical Exclusion Determinations issued by Lawrence Livermore Site Office. DOCUMENTS AVAILABLE FOR DOWNLOAD September 18, 2012 CX-010083: Categorical Exclusion Determination Radiography of Explosive Samples B321C CX(s) Applied: B3.6 Date: 09/18/2012 Location(s): California Offices(s): Lawrence Livermore Site Office September 18, 2012 CX-009257: Categorical Exclusion Determination Radiography of Explosive Samples B321C CX(s) Applied: B3.6 Date: 09/18/2012 Location(s): California Offices(s): Lawrence Livermore Site Office May 14, 2012 CX-008172: Categorical Exclusion Determination High-Pressure Crogenic Pump and Hydrogen Filling Station CX(s) Applied: B5.15 Date: 05/14/2012

386

Remote field eddy current inspection  

SciTech Connect

The Remote Field Eddy Current (RFEC) technique uses an internal probe to inspect conducting tubes nondestructively. A coaxial solenoidal exciter, energized with low frequency AC, and detector coils near the inside of the pipe wall are separated by about two pipe diameters to obtain through wall transmission and equal sensitivity to defects on the outside or inside of the pipe wall. Calculation methods are outlined and the voltage plane polar plot signal representation for defect measurement is described. Slit defect interactions in ferromagnetic and non-ferromagnetic tubes are discussed. Defect-induced anomalous fields are interpreted in terms of anomalous source eddy current and missing magnetization defect models. The use of computer animations to represent the time variations of high resolution field measurements and calculations is described.

Atherton, D.L. [Queen`s Univ., Kingston, Ontario (Canada). Dept. of Physics

1995-11-01T23:59:59.000Z

387

Visualization of parallel molecular dynamics simulation on a remote visualization platform  

SciTech Connect

Visualization requires high performance computers. In order to use these shared high performance computers located at national centers, the authors need an environment for remote visualization. Remote visualization is a special process that uses computing resources and data that are physically distributed over long distances. In their experimental environment, a parallel raytracer is designed for the rendering task. It allows one to efficiently visualize molecular dynamics simulations represented by three dimensional ball-and-stick models. Different issues encountered in creating their platform are discussed, such as I/O, load balancing, and data distribution.

Lee, T.Y.; Raghavendra, C.S. [Washington State Univ., Pullman, WA (United States); Nicholas, J.B. [Pacific Northwest Lab., Richland, WA (United States). Molecular Science Research Center

1994-09-01T23:59:59.000Z

388

T-608: HP Virtual Server Environment Lets Remote Authenticated...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8: HP Virtual Server Environment Lets Remote Authenticated Users Gain Elevated Privileges T-608: HP Virtual Server Environment Lets Remote Authenticated Users Gain Elevated...

389

Geothermal Exploration Using Aviris Remote Sensing Data Over...  

Open Energy Info (EERE)

Using Aviris Remote Sensing Data Over Fish Lake Valley, Nv Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Paper: Geothermal Exploration Using Aviris Remote...

390

V-202: Cisco Video Surveillance Manager Bugs Let Remote Users...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: Cisco Video Surveillance Manager Bugs Let Remote Users Obtain Potentially Sensitive Information V-202: Cisco Video Surveillance Manager Bugs Let Remote Users Obtain Potentially...

391

V-149: Microsoft Internet Explorer Object Access Bug Lets Remote...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9: Microsoft Internet Explorer Object Access Bug Lets Remote Users Execute Arbitrary Code V-149: Microsoft Internet Explorer Object Access Bug Lets Remote Users Execute Arbitrary...

392

U-262: Microsoft Internet Explorer Flaw Lets Remote Users Execute...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: Microsoft Internet Explorer Flaw Lets Remote Users Execute Arbitrary Code U-262: Microsoft Internet Explorer Flaw Lets Remote Users Execute Arbitrary Code September 18, 2012 -...

393

T-526: Microsoft Internet Explorer 'ReleaseInterface()' Remote...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

526: Microsoft Internet Explorer 'ReleaseInterface()' Remote Code Execution Vulnerability T-526: Microsoft Internet Explorer 'ReleaseInterface()' Remote Code Execution...

394

U-010:HP Onboard Administrator Unspecified Flaw Lets Remote Users...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Manager Unspecified Flaw Lets Remote Users Gain Unauthorized Access V-120: EMC Smarts Network Configuration Manager Java RMI Access Control Flaw Lets Remote Users Gain Full Control...

395

Community Energy Planning A Resource Guide for Remote Communities...  

Open Energy Info (EERE)

Resource Guide for Remote Communities in Canada Jump to: navigation, search Name Community Energy Planning A Resource Guide for Remote Communities in Canada AgencyCompany...

396

DOE - Office of Legacy Management -- Monticello Mill Site - UT 03  

NLE Websites -- All DOE Office Websites (Extended Search)

Mill Site - UT 03 Mill Site - UT 03 FUSRAP Considered Sites Site: Monticello Mill Site (UT.03) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Monticello, Utah, Disposal and Processing Sites Documents Related to Monticello Mill Site Monticello Mill Tailings Site Operable Unit III Interim Remedial Action Progress Report July 1999-July 2000. GJO-2000-163-TAR. September 2000 U.S. Department of Energy at Grand Junction 2003 Annual Inspection Monticello, Utah November 2003 2005 Annual Inspection of the Monticello Mill Tailings (USDOE) and Monticello Radioactively Contaminated Properties Sites December 2005 Office

397

Maps & Directions | Custom Map Location | Brookhaven National...  

NLE Websites -- All DOE Office Websites (Extended Search)

Want to share a specific location with others? Drag the marker pin to a new location and then share the following URL: http:www.bnl.govmapspoint.php?Lat40.86827&Lng-72.88113...

398

Site Map  

NLE Websites -- All DOE Office Websites (Extended Search)

Home » Site Map Home » Site Map Site Map Home About Overview NERSC Mission Contact us Staff Center Leadership Sudip Dosanjh Select Publications Jeff Broughton Katie Antypas John Shalf Francesca Verdier Center Administration James Craw Norma Early Jeff Grounds Betsy MacGowan Zaida McCunney Lynn Rippe Suzanne Stevenson David Tooker Center Communications Jon Bashor Linda Vu Margie Wylie Kathy Kincade Advanced Technologies Group Nicholas Wright Brian Austin Research Projects Matthew Cordery Christopher Daley Analytics Group Peter Nugent David Camp Hank Childs Harinarayan Krishnan Burlen Loring Joerg Meyer Prabhat Oliver Ruebel Daniela Ushizima Gunther Weber Yushu Yao Computational Systems Group Jay Srinivasan James Botts Scott Burrow Tina Butler Nick Cardo Tina Declerck Ilya Malinov David Paul Larry Pezzaglia Iwona Sakrejda

399

Factors of characteristic words: Location and decompositions  

Science Conference Proceedings (OSTI)

Let @a be an irrational number with 0Keywords: Characteristic word, Decomposition, Location, Overlap factor, Return words, Separate factor

Wai-Fong Chuan; Hui-Ling Ho

2010-06-01T23:59:59.000Z

400

Optimal Location of Vertical Wells: Decomposition Approach  

E-Print Network (OSTI)

Optimal Location of Vertical Wells: Decomposition Approach M. G. Ierapetritou and C. A. Floudas®elopment plan with well locations, gi®en a reser®oir property map and a set of infrastructure constraints, represents a ®ery challenging prob- lem. The problem of selecting the optimal ®ertical well locations

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Location, Decentralization, and Knowledge Sources for Innovation  

Science Conference Proceedings (OSTI)

When firms seek to innovate, they must decide where to locate their innovation activity. This location choice requires firms to make a simultaneous choice about the organizational structure of innovation activity: almost by definition, multiple locations ... Keywords: decentralization, imitative innovation, new-to-the-market innovation, research and development

Aija Leiponen; Constance E. Helfat

2011-05-01T23:59:59.000Z

402

Open neighborhood locating-dominating in trees  

Science Conference Proceedings (OSTI)

For a graph G that models a facility or a multiprocessor network, detection devices can be placed at the vertices so as to identify the location of an intruder such as a thief or saboteur or a faulty processor. Open neighborhood locating-dominating sets ... Keywords: Domination, Open neighborhood locating-dominating set

Suk J. Seo; Peter J. Slater

2011-03-01T23:59:59.000Z

403

U-244: McAfee Email Gateway Lets Remote Users Bypass Authentication and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4: McAfee Email Gateway Lets Remote Users Bypass Authentication 4: McAfee Email Gateway Lets Remote Users Bypass Authentication and Conduct Cross-Site Scripting and Directory Traversal Attacks U-244: McAfee Email Gateway Lets Remote Users Bypass Authentication and Conduct Cross-Site Scripting and Directory Traversal Attacks August 27, 2012 - 7:00am Addthis PROBLEM: McAfee Email Gateway Lets Remote Users Bypass Authentication and Conduct Cross-Site Scripting and Directory Traversal Attacks PLATFORM: McAfee Email Gateway (MEG) 7.0.0 and 7.0.1 (MEG 6.7.x is NOT affected.) McAfee Email and Web Security (EWS) 5.6 Patch 3 and earlier McAfee Email and Web Security (EWS) 5.5 Patch 6 and earlier ABSTRACT: Several vulnerabilities were reported in McAfee Email Gateway. reference LINKS: McAfee Security Bulletin ID: SB10026 SecurityTracker Alert ID: 1027444

404

V-029: Mozilla Firefox Multiple Bugs Let Remote Users Execute Arbitrary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

29: Mozilla Firefox Multiple Bugs Let Remote Users Execute 29: Mozilla Firefox Multiple Bugs Let Remote Users Execute Arbitrary Code and Conduct Cross-Site Scripting Attacks V-029: Mozilla Firefox Multiple Bugs Let Remote Users Execute Arbitrary Code and Conduct Cross-Site Scripting Attacks November 21, 2012 - 2:00am Addthis PROBLEM: Mozilla Firefox Multiple Bugs Let Remote Users Execute Arbitrary Code and Conduct Cross-Site Scripting Attacks PLATFORM: Version(s): prior to 17.0 ABSTRACT: Multiple vulnerabilities were reported in Mozilla Firefox REFERENCE LINKS: Mozilla Foundation Security Advisories Bugtraq ID: 55260 SecurityTracker Alert ID: 1027791 CVE-2012-4201, CVE-2012-4202, CVE-2012-4203, CVE-2012-4204, CVE-2012-4205, CVE-2012-4206, CVE-2012-4207,CVE-2012-4208, CVE-2012-4209, CVE-2012-4210, CVE-2012-4212, CVE-2012-4213, CVE-2012-4214, CVE-2012-4215, CVE-2012-4216,

405

U-244: McAfee Email Gateway Lets Remote Users Bypass Authentication and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

44: McAfee Email Gateway Lets Remote Users Bypass Authentication 44: McAfee Email Gateway Lets Remote Users Bypass Authentication and Conduct Cross-Site Scripting and Directory Traversal Attacks U-244: McAfee Email Gateway Lets Remote Users Bypass Authentication and Conduct Cross-Site Scripting and Directory Traversal Attacks August 27, 2012 - 7:00am Addthis PROBLEM: McAfee Email Gateway Lets Remote Users Bypass Authentication and Conduct Cross-Site Scripting and Directory Traversal Attacks PLATFORM: McAfee Email Gateway (MEG) 7.0.0 and 7.0.1 (MEG 6.7.x is NOT affected.) McAfee Email and Web Security (EWS) 5.6 Patch 3 and earlier McAfee Email and Web Security (EWS) 5.5 Patch 6 and earlier ABSTRACT: Several vulnerabilities were reported in McAfee Email Gateway. reference LINKS: McAfee Security Bulletin ID: SB10026 SecurityTracker Alert ID: 1027444

406

Heating remote rooms in passive solar buildings  

DOE Green Energy (OSTI)

Remote rooms can be effectively heated by convection through a connecting doorway. A simple steady-state equation is developed for design purposes. Validation of a dynamic model is achieved using data obtained over a 13-day period. Dynamic effects are investigated using a simulation analysis for three different cases of driving temperature; the effect is to reduce the temperature difference between the driving room and the remote room compared to the steady-state model. For large temperature swings in the driving room a strategy which uses the intervening door in a diode mode is effective. The importance of heat-storing mass in the remote room is investigated.

Balcomb, J.D.

1981-01-01T23:59:59.000Z

407

Remotely operated submersible underwater suction apparatus  

DOE Patents (OSTI)

A completely submersible, remotely operated underwater suction device for collection of irradiated materials in a nuclear pool is disclosed. The device includes a pump means for pumping water through the device, a filter means for capturing irradiated debris, remotely operated releasable connector means, a collection means and a means for remotely maneuvering the collection means. The components of the suction device may be changed and replaced underwater to take advantage of the excellent radiation shielding ability of water to thereby minimize exposure of personnel to radiation.

Kristan, Louis L. (2111 Brentwood Dr., Idaho Falls, ID 83402)

1990-01-01T23:59:59.000Z

408

Site survey method and apparatus  

SciTech Connect

The disclosure of the invention is directed to a site survey ground vehicle based apparatus and method for automatically detecting source materials, such as radioactivity, marking the location of the source materials, such as with paint, and mapping the location of the source materials on a site. The apparatus of the invention is also useful for collecting and analyzing samples. The apparatus includes a ground vehicle, detectors mounted at the front of the ground vehicle, and individual detector supports which follow somewhat irregular terrain to allow consistent and accurate detection, and autolocation equipment.

Oldham, James G. (Albuquerque, NM); Spencer, Charles R. (Boise, ID); Begley, Carl L. (Albuquerque, NM); Meyer, H. Robert (Albuquerque, NM)

1991-06-18T23:59:59.000Z

409

Site survey method and apparatus  

DOE Patents (OSTI)

The disclosure of the invention is directed to a site survey ground vehicle based apparatus and method for automatically detecting source materials, such as radioactivity, marking the location of the source materials, such as with paint, and mapping the location of the source materials on a site. The apparatus of the invention is also useful for collecting and analyzing samples. The apparatus includes a ground vehicle, detectors mounted at the front of the ground vehicle, and individual detector supports which follow somewhat irregular terrain to allow consistent and accurate detection, and autolocation equipment. 19 figures.

Oldham, J.G.; Spencer, C.R.; Begley, C.L.; Meyer, H.R.

1991-06-18T23:59:59.000Z

410

Redesigned ORNL DAAC Web Site  

NLE Websites -- All DOE Office Websites (Extended Search)

released a major revision to its Web site on Thursday, released a major revision to its Web site on Thursday, May 27, 2010. The new site includes many enhancements aimed at helping users locate and obtain data products and services. The simplified menu bar allows users to navigate quickly to products and services of interest and to access data through a variety of tools. The DAAC's Web site address remains unchanged (http://daac.ornl.gov), and as always, our products and services are available free of charge. Please note that your user account information will work on the new Web site. The Sign-in and Registration pages have a different look and will accept your email address as the User Name and retain your current password. If you have any problems accessing, signing-in, or registering with our new Web site, please contact our User Services Office, at +1 (865) 241-3952, or

411

SSA Old Jack Pine Site  

NLE Websites -- All DOE Office Websites (Extended Search)

SSA-OJP) SSA-OJP) View an aerial photo-map of the SSA-OJP site. The road to the OJP site The flux tower and the hut The truss tower connected to the flux tower by cables The flux tower< The canopy access tower The SRC meteorology tower The under-canopy flux station The moss-covered jack pine tree The ground cover at the OJP site Aerial view of the SSA-Old Jack Pine site looking to the northeast. The Flux Tower at SSA-Old Jack Pine site. The Sodar site. The NOAA sodar located near the Old Jack Pine in the SSA. The under-canopy radiation track This is a 14 meter-long metal track in the forest with a mobile radiometer out on an arm on a small motorized cart (visible at the center of the picture) that travels through the forest taking measurements of PAR and net radiation.

412

HANFORD SITE ASSETS AND ATTRIBUTES  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HANFORD SITE ASSETS AND ATTRIBUTES HANFORD SITE ASSETS AND ATTRIBUTES The Hanford Site provides the opportunity for long-term sustainable energy and industry development. The area boasts a specialized workforce that is highly educated and well-established; is rich in resources including land, infrastructure, low-cost energy, and available workforce; more scientists and engineers per capita than any other area in the Pacific Northwest; and is an optimum location for the development of sustainable energy solutions. Land The Hanford Site is one of the largest remaining land mega-sites available in the United States. * The 586-square-mile Hanford Site includes 39,000 acres designated for industrial use (9,000 acres for R&D). * The Comprehensive Land-Use Plan Environmental Impact Statement allows for a planning process

413

0.4 kV remote control (Smart Grid Project) | Open Energy Information  

Open Energy Info (EERE)

4 kV remote control (Smart Grid Project) 4 kV remote control (Smart Grid Project) Jump to: navigation, search Project Name 0.4 kV remote control Country Denmark Coordinates 56.26392°, 9.501785° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":56.26392,"lon":9.501785,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

414

Alternative Fueling Station Locator | Open Energy Information  

Open Energy Info (EERE)

Alternative Fueling Station Locator Alternative Fueling Station Locator Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Alternative Fueling Station Locator Agency/Company /Organization: United States Department of Energy Partner: National Renewable Energy Laboratory Sector: Energy Focus Area: Fuels & Efficiency, Transportation Phase: Evaluate Options, Prepare a Plan Topics: Datasets Resource Type: Online calculator User Interface: Website Website: www.afdc.energy.gov/afdc/locator/stations/ Web Application Link: www.afdc.energy.gov/afdc/locator/stations/ Cost: Free OpenEI Keyword(s): Featured References: National Renewable Energy Laboratory Advanced Vehicles and Fuels Research: Data and Resources[1] Logo: Alternative Fueling Station Locator The alternative fuel station locator uses an address based search to find

415

Locational analysis for the aluminum industry  

SciTech Connect

A locational analysis for the aluminum industry suggests that its locational pattern is probably even more clear-cut than that of the steel industry. Because the smelting of alumina into aluminum requires a very large amount of electric power, aluminum has become an industry highly oriented to cheap-power locations. A quick analysis, taking into account present technological and economic conditions, reveals that the potential advantages of the minimum-transport-cost location for an aluminum plant are clearly outweighed by the large power cost savings accruing from locating the plant at a cheap-power location. This holds true even with a fairly small differential in power rates between the two locations.

Isard, W.; Parcels, L.

1977-12-01T23:59:59.000Z

416

EOSO ENERGY MEASUREMENTS GROUP THE REMOT SENSIN EG&G SURVEY REPORT LABORATO  

Office of Legacy Management (LM)

Oe. 1-G Oe. 1-G l/ZL=q n EOSO ENERGY MEASUREMENTS GROUP THE REMOT SENSIN EG&G SURVEY REPORT LABORATO EP-F-002 Of THE UNITED STATES DECEMBER 1981 DEPARTMENT OF ENERGY AN AERIAL RADIOLOGICAL SURVEY OF THE AREA SURROUNDING THE BUREAU OF MINES SITE ALBANY, OREGON DATE OF SURVEY: FEBRUARY 1980 AN AERIAL RADIOLOGICAL SURVEY OF THE BUREAU OF MINES SITE ALBANY, OREGON I I I . t I 1 I I I I I I I t PROJECT SCIENTIST: E. FEIMSTER EG&G, INC. LAS VEGAS, NEVADA 1.0 SUMMARY OF RESULTS An aerial radiological measuring system was used to survey areas surrounding the Bureau of Mines Site near Albany, Oregon in February 1980. The survey was conducted for the U.S. Department of Energy's Office of Operational Safety by the Department's Remote Sensing Laboratory of Las

417

Categorical Exclusion Determinations: Y-12 Site Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Y-12 Site Office Y-12 Site Office Categorical Exclusion Determinations: Y-12 Site Office Categorical Exclusion Determinations issued by Y-12 Site Office. DOCUMENTS AVAILABLE FOR DOWNLOAD February 7, 2013 CX-009251: Categorical Exclusion Determination High Contamination Area Cleanup Project (4596) CX(s) Applied: B1.3 Date: 06/25/2012 Location(s): Tennessee Offices(s): Y-12 Site Office September 5, 2012 CX-009250: Categorical Exclusion Determination Lithium Wet Chemistry Project (4597) CX(s) Applied: B3.6 Date: 09/05/2012 Location(s): Tennessee Offices(s): Y-12 Site Office August 22, 2012 CX-009249: Categorical Exclusion Determination Security Upgrade Project (4598) CX(s) Applied: B1.3, B1.11 Date: 08/22/2012 Location(s): Tennessee Offices(s): Y-12 Site Office June 4, 2012 CX-008801: Categorical Exclusion Determination

418

Categorical Exclusion Determinations: Princeton Site Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Princeton Site Office Princeton Site Office Categorical Exclusion Determinations: Princeton Site Office Categorical Exclusion Determinations issued by Princeton Site Office. DOCUMENTS AVAILABLE FOR DOWNLOAD August 16, 2012 CX-009095: Categorical Exclusion Determination ITER Port Plug Test Facility CX(s) Applied: B3.6 Date: 08/16/2012 Location(s): New Jersey Offices(s): Princeton Site Office June 3, 2010 CX-002666: Categorical Exclusion Determination Plasma Based Nanotechnology Research and Development Laboratory CX(s) Applied: B3.6 Date: 06/03/2010 Location(s): New Jersey Office(s): Princeton Site Office, Science May 4, 2010 CX-002196: Categorical Exclusion Determination STS-100 Test Stand Experiment CX(s) Applied: B3.6 Date: 05/04/2010 Location(s): Princeton, New Jersey Office(s): Princeton Site Office, Science

419

Categorical Exclusion Determinations: Pantex Site Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Pantex Site Office Pantex Site Office Categorical Exclusion Determinations: Pantex Site Office Categorical Exclusion Determinations issued by Pantex Site Office. DOCUMENTS AVAILABLE FOR DOWNLOAD August 28, 2012 CX-009244: Categorical Exclusion Determination Zones 11 and 12 Steam Line Replacement CX(s) Applied: B1.3 Date: 08/28/2012 Location(s): Texas, Texas Offices(s): Pantex Site Office August 7, 2012 CX-008831: Categorical Exclusion Determination Algaecide Use at Wastewater Treatment Facility - Amendment 01 CX(s) Applied: B1.3 Date: 08/07/2012 Location(s): Texas Offices(s): Pantex Site Office July 25, 2012 CX-008830: Categorical Exclusion Determination Buildings 12-64/12-84 Electrical Equipment Installation CX(s) Applied: B1.3, B1.15 Date: 07/25/2012 Location(s): Texas Offices(s): Pantex Site Office

420

Categorical Exclusion Determinations: Berkeley Site Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Berkeley Site Office Berkeley Site Office Categorical Exclusion Determinations: Berkeley Site Office Categorical Exclusion Determinations issued by Berkeley Site Office. DOCUMENTS AVAILABLE FOR DOWNLOAD December 1, 2011 CX-010373: Categorical Exclusion Determination Sanford Underground Research Facility CX(s) Applied: B2.1; B3.6 Date: 12/01/2011 Location(s): South Dakota Offices(s): Berkeley Site Office October 4, 2011 CX-010374: Categorical Exclusion Determination Onsite Solar Photovoltaic System CX(s) Applied: B5.1 Date: 10/04/2011 Location(s): California Offices(s): Berkeley Site Office September 20, 2011 CX-010375: Categorical Exclusion Determination Replace Existing Firehouse CX(s) Applied: B1.15 Date: 09/20/2011 Location(s): California Offices(s): Berkeley Site Office August 2, 2011

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Categorical Exclusion Determinations: Kansas City Site Office | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Kansas City Site Office Kansas City Site Office Categorical Exclusion Determinations: Kansas City Site Office Categorical Exclusion Determinations issued by Kansas City Site Office. DOCUMENTS AVAILABLE FOR DOWNLOAD October 30, 2012 CX-009420: Categorical Exclusion Determination Additive Manufacturing Using EOSINT M280 CX(s) Applied: None applied. Date: 10/30/2012 Location(s): Missouri Offices(s): Kansas City Site Office October 30, 2012 CX-009419: Categorical Exclusion Determination Magnetic Pulser CX(s) Applied: None applied. Date: 10/30/2012 Location(s): Missouri Offices(s): Kansas City Site Office October 30, 2012 CX-009418: Categorical Exclusion Determination Electron Beam Melting CX(s) Applied: None applied. Date: 10/30/2012 Location(s): Missouri Offices(s): Kansas City Site Office October 30, 2012

422

Categorical Exclusion Determinations: Y-12 Site Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Y-12 Site Office Y-12 Site Office Categorical Exclusion Determinations: Y-12 Site Office Categorical Exclusion Determinations issued by Y-12 Site Office. DOCUMENTS AVAILABLE FOR DOWNLOAD January 28, 2010 CX-000834: Categorical Exclusion Determination Evaluation Project (4492) CX(s) Applied: B1.3, B2.5 Date: 01/28/2010 Location(s): Oak Ridge, Tennessee Office(s): Y-12 Site Office January 5, 2010 CX-000558: Categorical Exclusion Determination Building 9204-2E Vacuum System Upgrade (4489) CX(s) Applied: B1.3, B2.2 Date: 01/05/2010 Location(s): Oak Ridge, Tennessee Office(s): Y-12 Site Office January 5, 2010 CX-000559: Categorical Exclusion Determination Chiller Booster Pumps (4487) CX(s) Applied: B1.3, B2.2 Date: 01/05/2010 Location(s): Oak Ridge, Tennessee Office(s): Y-12 Site Office

423

Categorical Exclusion Determinations: Berkeley Site Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Berkeley Site Office Berkeley Site Office Categorical Exclusion Determinations: Berkeley Site Office Categorical Exclusion Determinations issued by Berkeley Site Office. DOCUMENTS AVAILABLE FOR DOWNLOAD April 22, 2013 CX-010348: Categorical Exclusion Determination Joint BioEnergy Institute CX(s) Applied: B1.24, B3.6 Date: 04/22/2013 Location(s): California Offices(s): Berkeley Site Office April 19, 2013 CX-010349: Categorical Exclusion Determination Test House CX(s) Applied: B1.24; B1.4; B3.6 Date: 04/19/2013 Location(s): California Offices(s): Berkeley Site Office April 4, 2013 CX-010350: Categorical Exclusion Determination Aerial Photography Activity Over the Proposed Richmond Bay Campus CX(s) Applied: B3.2 Date: 04/04/2013 Location(s): California Offices(s): Berkeley Site Office March 1, 2013

424

Categorical Exclusion Determinations: Argonne Site Office | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Argonne Site Office Argonne Site Office Categorical Exclusion Determinations: Argonne Site Office Categorical Exclusion Determinations issued by Argonne Site Office. DOCUMENTS AVAILABLE FOR DOWNLOAD August 9, 2013 CX-010868: Categorical Exclusion Determination Bio Safety Level-1 and Bio Safety Level-2 Research at Argonne CX(s) Applied: B3.6 Date: 08/09/2013 Location(s): Illinois Offices(s): Argonne Site Office August 7, 2013 CX-010869: Categorical Exclusion Determination Nauticas Research Program CX(s) Applied: B3.6 Date: 08/07/2013 Location(s): Illinois Offices(s): Argonne Site Office July 12, 2013 CX-010870: Categorical Exclusion Determination New Advanced Photon Source Parking Lot on Kearney Road CX(s) Applied: B1.15 Date: 07/12/2013 Location(s): Illinois Offices(s): Argonne Site Office

425

V-Site Assembly Building and Gun Site | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

V-Site Assembly Building and Gun Site V-Site Assembly Building and Gun Site V-Site Assembly Building and Gun Site V-Site Assembly Building and Gun Site The V-Site buildings and the nearby Gun Site are the last significant structures still standing at Los Alamos associated with the development and assembly of the world's first nuclear devices. Located away from the main laboratory for safety and security reasons, the V-Site consisted of a cluster of wooden buildings built in January 1944 as a high explosives handling and assembly facility. V-Site was one of the most secret areas in the Manhattan Project as it was here that all elements of the project finally came together. Few records exist to document activities at the site. Photographs were prohibited, and the area was hidden behind a "no-peek" fence. The Gadget, which became the prototype for the "Fat Man"

426

Remote NDE Technology for Steam Turbines  

Science Conference Proceedings (OSTI)

Remote nondestructive evaluation technology (NDE) for steam turbines has potential for use as an alternative to inspections requiring extensive machine disassembly and for use during short-term outages, to provide an interim look at machine operability.

2002-11-21T23:59:59.000Z

427

Quick-connect coupler for remote manipulation  

DOE Patents (OSTI)

An adaptor for a single-point attachment, push-to-connect/pull-to- disconnect, quick-connect fluid coupler which enables the coupler to be remotely manipulated. 5 figs.

Dobbins, J.C.

1989-07-27T23:59:59.000Z

428

Remotely piloted vehicles; A selective bibliography  

SciTech Connect

This report is a bibliography from the International Aerospace Abstracts and the Scientific and Technical Aerospace Abstracts on remotely piloted vehicles. Most of the applications of these RPV`s are military in nature.

Farley, R. [comp.

1975-12-01T23:59:59.000Z

429

ACCP web site  

NLE Websites -- All DOE Office Websites (Extended Search)

ACCP Datasets Available ACCP - The Accelerated Canopy Chemistry Program (ACCP) was an investigation to determine the theoretical and empirical basis for remote sensing of nitrogen...

430

Savannah River Site  

NLE Websites -- All DOE Office Websites (Extended Search)

hydrogen tests, shielding surveys, and the startup tests of individual components and remote handling features. The startup testing program was accomplished six months ahead of...

431

On-road remote sensing of vehicle emissions in  

E-Print Network (OSTI)

On-road remote sensing of vehicle emissions in the Auckland Region August 2003 Technical 1877353000 www.arc.govt.nz #12;TP 198 On-Road Remote Sensing of Vehicle Emissions in the Auckland Region #12;Page i TP 198 On-Road Remote Sensing of Vehicle Emissions in the Auckland Region On-road remote sensing

Denver, University of

432

Global remote sensing research trends during 19912010: a bibliometric analysis  

E-Print Network (OSTI)

Global remote sensing research trends during 1991­2010: a bibliometric analysis Yanhua Zhuang to remote sensing of SCI and SSCI databases during 1991­2010, this study evaluated the geographical, institutional, national, and spatiotemporal patterns in remote sensing research. Remote sensing research went up

Gruner, Daniel S.

433

Remote Sensing of Natural Areas: Procedures and Considerations for  

E-Print Network (OSTI)

1 Remote Sensing of Natural Areas: Procedures and Considerations for Assessing Vegetation Ecosystems and Remote Sensing Program Introduction Remote sensing can be defined as the acquisi- tion for rapid analysis. In the last Technical Report, we provided an in- troduction to how remote sensing can

434

Surface-Based Remote Sensing of the Aerosol Indirect Effect at Southern Great Plains  

NLE Websites -- All DOE Office Websites (Extended Search)

Surface-Based Remote Sensing of the Surface-Based Remote Sensing of the Aerosol Indirect Effect at Southern Great Plains G. Feingold and W. L. Eberhard National Oceanic and Atmospheric Administration Environmental Technology Laboratory Boulder, Colorado D. E. Vernon and M. Previdi Rutgers University New Brunswick, New Jersey Abstract We have demonstrated first measurements of the aerosol indirect effect using ground-based remote sensors at the Southern Great Plains (SGP) site. The response of non-precipitating, ice-free clouds to changes in aerosol loading is quantified in terms of a relative change in cloud-drop effective radius (r e ) for a relative change in aerosol extinction under conditions of equivalent cloud liquid water path (LWP). This is done in a single column of air at a temporal resolution of 20 s (spatial resolution of ~100 m).

435

Remote-Handled Low-Level Waste Disposal Project Alternatives Analysis  

SciTech Connect

This report identifies, evaluates, and compares alternatives for meeting the U.S. Department of Energys mission need for management of remote-handled low-level waste generated by the Idaho National Laboratory and its tenants. Each alternative identified in the Mission Need Statement for the Remote-Handled Low-Level Waste Treatment Project is described and evaluated for capability to fulfill the mission need. Alternatives that could meet the mission need are further evaluated and compared using criteria of cost, risk, complexity, stakeholder values, and regulatory compliance. The alternative for disposal of remote-handled low-level waste that has the highest confidence of meeting the mission need and represents best value to the government is to build a new disposal facility at the Idaho National Laboratory Site.

David Duncan

2009-10-01T23:59:59.000Z

436

Remote-Handled Low-Level Waste Disposal Project Alternatives Analysis  

SciTech Connect

This report identifies, evaluates, and compares alternatives for meeting the U.S. Department of Energys mission need for management of remote-handled low-level waste generated by the Idaho National Laboratory and its tenants. Each alternative identified in the Mission Need Statement for the Remote-Handled Low-Level Waste Treatment Project is described and evaluated for capability to fulfill the mission need. Alternatives that could meet the mission need are further evaluated and compared using criteria of cost, risk, complexity, stakeholder values, and regulatory compliance. The alternative for disposal of remote-handled low-level waste that has the highest confidence of meeting the mission need and represents best value to the government is to build a new disposal facility at the Idaho National Laboratory Site.

David Duncan

2011-03-01T23:59:59.000Z

437

Remote-Handled Low-Level Waste Disposal Project Alternatives Analysis  

SciTech Connect

This report identifies, evaluates, and compares alternatives for meeting the U.S. Department of Energys mission need for management of remote-handled low-level waste generated by the Idaho National Laboratory and its tenants. Each alternative identified in the Mission Need Statement for the Remote-Handled Low-Level Waste Treatment Project is described and evaluated for capability to fulfill the mission need. Alternatives that could meet the mission need are further evaluated and compared using criteria of cost, risk, complexity, stakeholder values, and regulatory compliance. The alternative for disposal of remote-handled low-level waste that has the highest confidence of meeting the mission need and represents best value to the government is to build a new disposal facility at the Idaho National Laboratory Site.

David Duncan

2011-04-01T23:59:59.000Z

438

Remote-Handled Low-Level Waste Disposal Project Alternatives Analysis  

SciTech Connect

This report identifies, evaluates, and compares alternatives for meeting the U.S. Department of Energys mission need for management of remote-handled low-level waste generated by the Idaho National Laboratory and its tenants. Each alternative identified in the Mission Need Statement for the Remote-Handled Low-Level Waste Treatment Project is described and evaluated for capability to fulfill the mission need. Alternatives that could meet the mission need are further evaluated and compared using criteria of cost, risk, complexity, stakeholder values, and regulatory compliance. The alternative for disposal of remote-handled low-level waste that has the highest confidence of meeting the mission need and represents best value to the government is to build a new disposal facility at the Idaho National Laboratory Site.

David Duncan

2010-06-01T23:59:59.000Z

439

T-662: ISC BIND Packet Processing Flaw Lets Remote Users Deny Service |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: ISC BIND Packet Processing Flaw Lets Remote Users Deny 2: ISC BIND Packet Processing Flaw Lets Remote Users Deny Service T-662: ISC BIND Packet Processing Flaw Lets Remote Users Deny Service July 6, 2011 - 7:47am Addthis PROBLEM: A vulnerability was reported in ISC BIND. A remote user can cause denial of service conditions. PLATFORM: 9.6.3, 9.6-ESV-R4, 9.6-ESV-R4-P1, 9.6-ESV-R5b1 9.7.0, 9.7.0-P1, 9.7.0-P2, 9.7.1, 9.7.1-P1, 9.7.1-P2, 9.7.2, 9.7.2-P1, 9.7.2-P2, 9.7.2-P3, 9.7.3, 9.7.3-P1, 9.7.3-P2, 9.7.4b1 9.8.0, 9.8.0-P1, 9.8.0-P2, 9.8.0-P3, 9.8.1b1 ABSTRACT: A defect in the affected BIND 9 versions allows an attacker to remotely cause the "named" process to exit using a specially crafted packet. This defect affects both recursive and authoritative servers. The code location of the defect makes it impossible to protect BIND using ACLs configured

440

Site C  

Office of Legacy Management (LM)

' ' u. s. A r my Corps or Engineers Kurfal.. Ilisfr ifl om« 1776 N1 . ~lI rll Sfred , lIu fflll" , New v ur k. 14207 Site C loseout Report for th e Ashland I (Includlng Seaway Arca D), Ashland 2 and Rattlesnake Creek FUS RAP Sites To nawanda . New Yor k F ina l - Octo ber 2006 Formerl y Ut ilized Sites Remedi al Actiun Program Dt:CLAlUlfiO lO OF RF ~ I'O""" A <:n o .. ('oMnLflOI'O '" 1 S-~1 1 A "n· nvnn: S Ill: C'lO'iU 'U l RtrUlIT f OR A SlIu x u l (I "ICLU I ING S t:A" ·,H A RU D j, AS H I .A ~O 2 A."n RAnU:M'AKf eRU" ~ rn~ I!d'on at A.hland 1 (Ind udonl Seaway Area DJ. Ashland 2 and kan~snak c Creek is Wi,...... 1c in acwr.hnu willi ~ Rcconl or Oecisim (ROD) . igned 00> April 20. 1998 and l'.1pbIWlOII <;If

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Helicopter magnetic survey conducted to locate wells  

Science Conference Proceedings (OSTI)

A helicopter magnetic survey was conducted in August 2007 over 15.6 sq mi at the Naval Petroleum Reserve No. 3s (NPR-3) Teapot Dome Field near Casper, Wyoming. The surveys purpose was to accurately locate wells drilled there during more than 90 years of continuous oilfield operation. The survey was conducted at low altitude and with closely spaced flight lines to improve the detection of wells with weak magnetic response and to increase the resolution of closely spaced wells. The survey was in preparation for a planned CO2 flood for EOR, which requires a complete well inventory with accurate locations for all existing wells. The magnetic survey was intended to locate wells missing from the well database and to provide accurate locations for all wells. The ability of the helicopter magnetic survey to accurately locate wells was accomplished by comparing airborne well picks with well locations from an intense ground search of a small test area.

Veloski, G.A.; Hammack, R.W.; Stamp, V. (Rocky Mountain Oilfield Testing Center); Hall, R. (Rocky Mountain Oilfield Testing Center); Colina, K. (Rocky Mountain Oilfield Testing Center)

2008-07-01T23:59:59.000Z

442

Robotics and remote systems developments and applications, FY96. Revision 1  

Science Conference Proceedings (OSTI)

The purpose of this report is to document the contributions that the Savannah River Technology Center (SRTC) has made during Fiscal Year 1996 in the Robotics and Remote Systems Technology arena. The contributions originated from the Applied Science and Engineering Technology (ASET) Department`s Equipment Engineering Section (EES). Activities and deliverables for the Savannah River Site`s (SRS) main operating divisions as well as contributions to new mission activities, other Department of Energy (DOE) sites and programs, intellectual property development and professional societies are described.

Lewis, W.I. III; Teese, G.D.

1996-10-01T23:59:59.000Z

443

Distribution Fault Location and Waveform Characterization  

Science Conference Proceedings (OSTI)

Automated fault location algorithms for distribution systems require monitoring equipment to record voltage and current waveforms during an event. In addition, most of these algorithms require circuit-impedance parameters to evaluate the fault location. Locating incipient faults and fault waveform characterization is the main aim of this project. This project builds on work done in 2008 towards sub-cycle blip identification using an algorithm based on arc voltage.

2009-12-11T23:59:59.000Z

444

Benchmarking of Fault-Location Technologies  

Science Conference Proceedings (OSTI)

This report resumes the studies on fault-location technologies that were conducted in 2009. These studies were undertaken in a joint project done with the collaboration of Hydro-Qubec, Long Island Power Authority, and the Electric Power Research Institute (EPRI). Two fault-location technologies were tested, the Reactance to Fault (RTF) implemented in the PQView application and the Voltage Drop Fault Location (VDFL) implemented in the MILE application. The RTF is based on substation voltage and current me...

2011-03-31T23:59:59.000Z

445

YUCCA MOUNTAIN SITE DESCRIPTION  

SciTech Connect

The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

A.M. Simmons

2004-04-16T23:59:59.000Z

446

YUCCA MOUNTAIN SITE DESCRIPTION  

SciTech Connect

The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

A.M. Simmons

2004-04-16T23:59:59.000Z

447

Russian Locations | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Russian Locations Home > About Us > Our Programs > Defense Programs > Future Science & Technology Programs > Office of Advanced Simulation and Computing Institutional Research...

448

Locating Restricted Facilities on Binary Maps  

E-Print Network (OSTI)

The encoding could represent clean and polluted areas or desirable and undesirable zones. For this encoding, we consider several facility location problems to...

449

The Facility Location Problem with Bernoulli Demands  

E-Print Network (OSTI)

Abstract. In this paper we address a discrete capacitated facility location problem in which ...... The type of instance for FLPBD (1, 2, 3, or 4) as described above.

450

2010 Hyundai LPI Hybrid Test Cell Location  

NLE Websites -- All DOE Office Websites (Extended Search)

Hyundai LPI Hybrid Test Cell Location APRF- 4WD Vehicle Setup Information Downloadable Dynamometer Database (D 3 )- Test Summary Sheet Vehicle Architecture Alternative Fuel Hybrid...

451

2010 Volkswagen Golf TDI Test Cell Location  

NLE Websites -- All DOE Office Websites (Extended Search)

Golf TDI Test Cell Location APRF- 4WD Vehicle Setup Information Downloadable Dynamometer Database (D 3 )- Test Summary Sheet Vehicle Architecture Conventional- Start Stop Vehicle...

452

Procurement Information by Location | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Procurement Information by Location Procurement Information by Location Procurement Information by Location As part of our Small Business Opportunity Tool, we are offering information about historical procurement by location. Find historical procurement data by state - check out the list of states below, and click on the state's name to learn more about their current programs and past procurement needs. Click on the state to learn more about our current procurement activity: California Colorado District of Columbia Georgia Idaho Illinois Iowa Louisana Maryland Missouri Nevada New Jersey New Mexico New York Ohio Oklahoma Oregon Pennsylvania South Carolina Tennessee Texas Virginia West Virginia Washington Wyoming

453

Sandia National Laboratories: Locations: Albuquerque, New Mexico...  

NLE Websites -- All DOE Office Websites (Extended Search)

Albuquerque Housing Education Recreation Locations Life in Albuquerque Photo of New Mexico landscape Albuquerque is New Mexico's largest city, with a population of more than...

454

Fiber optically isolated and remotely stabilized data transmission system  

DOE Patents (OSTI)

A fiber optically isolated and remotely stabilized data transmission system s described wherein optical data may be transmitted over an optical data fiber from a remote source which includes a data transmitter and a power supply at the remote source. The transmitter may be remotely calibrated and stabilized via an optical control fiber, and the power source may be remotely cycled between duty and standby modes via an optical control fiber.

Nelson, Melvin A. (Santa Barbara, CA)

1992-01-01T23:59:59.000Z

455

Fiber optically isolated and remotely stabilized data transmission system  

DOE Patents (OSTI)

A fiber optically isolated and remotely stabilized data transmission systems described wherein optical data may be transmitted over an optical data fiber from a remote source which includes a data transmitter and a power supply at the remote source. The transmitter may be remotely calibrated and stabilized via an optical control fiber, and the power source may be remotely cycled between duty and standby modes via an optical control fiber. 3 figs.

Nelson, M.A.

1992-11-10T23:59:59.000Z

456

A fiber optically isolated and remotely stabilized data transmission system  

DOE Patents (OSTI)

It is, an object of this invention to provide a fiber optically isolated and remotely stabilized data transmission system wherein optical data may be transmitted over an optical data fiber from a remote source which includes a data transmitter and a power supply at the remote source, the transmitter may be remotely calibrated and stabilized via an optical control fiber, and the power source may be remotely cycled between duty and standby modes via an optical control fiber.

Nelson, M.A.

1991-01-01T23:59:59.000Z

457

A fiber optically isolated and remotely stabilized data transmission system  

DOE Patents (OSTI)

It is, an object of this invention to provide a fiber optically isolated and remotely stabilized data transmission system wherein optical data may be transmitted over an optical data fiber from a remote source which includes a data transmitter and a power supply at the remote source, the transmitter may be remotely calibrated and stabilized via an optical control fiber, and the power source may be remotely cycled between duty and standby modes via an optical control fiber.

Nelson, M.A.

1991-12-31T23:59:59.000Z

458

DOE - Office of Legacy Management -- Pathfinder Lucky Mc Site - 042  

NLE Websites -- All DOE Office Websites (Extended Search)

Pathfinder Lucky Mc Site - 042 Pathfinder Lucky Mc Site - 042 FUSRAP Considered Sites Site: Pathfinder Lucky Mc Site (042) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: The Pathfinder Lucky Mc site is a Uranium Mill Tailings Remedial Action (UMTRA) Title II site located in the Gas Hills Uranium Mining District west of Casper, Wyoming. UMTRA Title II sites are privately owned and operated sites that were active when the Uranium Mill Tailings Radiation Control Act was passed in 1978. The majority of the milling conducted at these sites was for private sale, but a portion was sold to the U.S. Government. After the owner completes U.S. Nuclear Regulatory Commission license termination,

459

DOE - Office of Legacy Management -- WNI Sherwood Site - 039  

NLE Websites -- All DOE Office Websites (Extended Search)

Sherwood Site - 039 Sherwood Site - 039 FUSRAP Considered Sites Site: WNI Sherwood Site (039) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: This site is a Uranium Mill Tailings Remedial Action (UMTRA) Title II site located in the State of Washington. UMTRA Title II sites are privately owned and operated sites that were active when the Uranium Mill Tailings Radiation Control Act was passed in 1978. The majority milling conducted at this site was for private sale. After the owner completes NRC license termination the Department of Energy¿s Grand Junction Office will be responsible for providing stewardship for the groundwater and disposal

460

DOE - Office of Legacy Management -- Chevron Panna Maria Site - 030  

NLE Websites -- All DOE Office Websites (Extended Search)

Chevron Panna Maria Site - 030 Chevron Panna Maria Site - 030 FUSRAP Considered Sites Site: Chevron Panna Maria Site (030) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: This site is a Uranium Mill Tailings Remedial Action (UMTRA) Title II site located in Texas. UMTRA Title II sites are privately owned and operated sites that were active when the Uranium Mill Tailings Radiation Control Act was passed in 1978. The milling conducted at this site was for private sale. After the owner completes U. S. Nuclear Regulatory Commission license termination the Department of Energy¿s Grand Junction Office will be responsible for providing stewardship for the groundwater and disposal

Note: This page contains sample records for the topic "remote site locations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.