Powered by Deep Web Technologies
Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

System and method for controlling remote devices  

DOE Patents [OSTI]

A system and method for controlling remote devices utilizing a radio frequency identification (RFID) tag device having a control circuit adapted to render the tag device, and associated objects, permanently inoperable in response to radio-frequency control signals. The control circuit is configured to receive the control signals that can include an enable signal, and in response thereto enable an associated object, such as a weapon; and in response to a disable signal, to disable the tag itself, or, if desired, to disable the associated weapon or both the device and the weapon. Permanent disabling of the tag can be accomplished by several methods, including, but not limited to, fusing a fusable link, breaking an electrically conductive path, permanently altering the modulation or backscattering characteristics of the antenna circuit, and permanently erasing an associated memory. In this manner, tags in the possession of unauthorized employees can be remotely disabled, and weapons lost on a battlefield can be easily tracked and enabled or disabled automatically or at will.

Carrender, Curtis Lee (Richland, WA); Gilbert, Ronald W. (Benton City, WA); Scott, Jeff W. (Pasco, WA); Clark, David A. (Kennewick, WA)

2006-02-07T23:59:59.000Z

2

Remote controlled ISI devices for RPV bottom head  

SciTech Connect (OSTI)

The bottom head of a reactor pressure vessel (RPV) of the boiling water reactor (BWR) is one of the areas on which it is very difficult to perform an inservice inspection (ISI). Welds in a bottom head central disk and a drain nozzle are required to be inspected, but its accessibility is restricted by a RPV skirt, a thermal insulation, control rod drive housings and incore monitor housings. Therefore, the remote mechanized scanners are necessary to access and examine the welds. Two kinds of new device were developed to accomplish this inspection. The bottom head central disk weld inspection device has a parallel link mechanism scanning arm with a combined-transducer module to get as much as wide scanning area between control rod drive housings. The device is driven along the weld by moving on the separable track which is set temporally on the bottom head insulation. The drain nozzle weld inspection device has a horseshoe shaped gear mechanism to drive a combined-transducer module. The device is set up on to the drain nozzle using an insertion handle. Both devices have an emergency retrieval mechanism to withdraw the devices in case of power loss accident. Those devices were demonstrated by a mock-up test to be applicable to the inspection of the RPV bottom head.

Shiga, S. [Toshiba Corp., Yokohama (Japan); Mori, H. [Tokyo Electric Power Co. (Japan); Kobayashi, K. Sasaki, T. [Ishikawajima-Harima Heavy Industries Co., Ltd., Yokohama (Japan)

1995-08-01T23:59:59.000Z

3

NMR analysis on microfluidic devices by remote detection  

SciTech Connect (OSTI)

We present a novel approach to perform high-sensitivity NMR imaging and spectroscopic analysis on microfluidic devices. The application of NMR, the most information rich spectroscopic technique, to microfluidic devices remains a challenge because the inherently low sensitivity of NMR is aggravated by small fluid volumes leading to low NMR signal, and geometric constraints resulting in poor efficiency for inductive detection. We address the latter by physically separating signal detection from encoding of information with remote detection. Thereby, we use a commercial imaging probe with sufficiently large diameter to encompass the entire device, enabling encoding of NMR information at any location on the chip. Because large-diameter coils are too insensitive for detection, we store the encoded information as longitudinal magnetization and flow it into the outlet capillary. There, we detect the signal with optimal sensitivity using a solenoidal microcoil, and reconstruct the information encoded in the fluid. We present a generally applicable design for a detection-only microcoil probe that can be inserted into the bore of a commercial imaging probe. Using hyperpolarized 129Xe gas, we show that this probe enables sensitive reconstruction of NMR spectroscopic information encoded by the large imaging probe while keeping the flexibility of a large coil.

McDonnell, Erin E.; Han, SongI; Hilty, Christian; Pierce,Kimberly; Pines, Alexander

2005-08-15T23:59:59.000Z

4

Modeling Complex Control Systems to Identify Remotely Accessible Devices Vulnerable to Cyber Attack1  

E-Print Network [OSTI]

and SCADA systems such as: "Which is the most vulnerable device of our power substation under an attack to remote power substations and control centers comes with the added risk of cyber attack by hackers andModeling Complex Control Systems to Identify Remotely Accessible Devices Vulnerable to Cyber Attack

Krings, Axel W.

5

Local intelligent electronic device (IED) rendering templates over limited bandwidth communication link to manage remote IED  

DOE Patents [OSTI]

The present disclosure provides systems and methods for remote device management. According to various embodiments, a local intelligent electronic device (IED) may be in communication with a remote IED via a limited bandwidth communication link, such as a serial link. The limited bandwidth communication link may not support traditional remote management interfaces. According to one embodiment, a local IED may present an operator with a management interface for a remote IED by rendering locally stored templates. The local IED may render the locally stored templates using sparse data obtained from the remote IED. According to various embodiments, the management interface may be a web client interface and/or an HTML interface. The bandwidth required to present a remote management interface may be significantly reduced by rendering locally stored templates rather than requesting an entire management interface from the remote IED. According to various embodiments, an IED may comprise an encryption transceiver.

Bradetich, Ryan; Dearien, Jason A; Grussling, Barry Jakob; Remaley, Gavin

2013-11-05T23:59:59.000Z

6

Mobile Collaboration: Collaboratively Reading and Creating Children's Stories on Mobile Devices  

E-Print Network [OSTI]

Mobile Collaboration: Collaboratively Reading and Creating Children's Stories on Mobile Devices 20742 allisond@umiacs.umd.edu, mona@cs.umd.edu ABSTRACT This paper discusses design iterations of Mobile Stories ­ a mobile technology that empowers children to collaboratively read and create stories. We

Golbeck, Jennifer

7

Remote vacuum or pressure sealing device and method for critical isolated systems  

DOE Patents [OSTI]

A remote vacuum or pressure sealing apparatus and method for making a radiation tolerant, remotely prepared seal that maintains a vacuum or pressure tight seal throughout a wide temperature range. The remote sealing apparatus includes a fixed threaded sealing surface on an isolated system, a gasket, and an insert consisting of a plug with a protruding sample holder. An insert coupling device, provided for inserting samples within the isolated system, includes a threaded fastener for cooperating with the fixed threaded sealing surface on the isolated system. The insert coupling device includes a locating pin for azimuthal orientation, coupling pins, a tooted coaxial socket wrench, and an insert coupling actuator for actuating the coupling pins. The remote aspect of the sealing apparatus maintains the isolation of the system from the user's environment, safely preserving the user and the system from detrimental effect from each respectively.

Brock, James David (Newport News, VA); Keith, Christopher D. (Newport News, VA)

2012-07-10T23:59:59.000Z

8

Remote two-wire data entry method and device  

DOE Patents [OSTI]

This invention is comprised of a device for detecting switch closure such as in a keypad for entering data comprising a matrix of conductor pairs and switches, each pair of conductors shorted by the pressing of a particular switch, and current-regulating devices on each conductor for limiting current in one direction and passing it without limit in the other direction. The device is driven by alternating current. The ends of the conductors in a conductor pair limit current of opposing polarities with respect to each other so that the signal on a shorted pair is an alternating current signal with a unique combination of a positive and a negative peak, which, when analyzed, allows the determination of which key was pressed. The binary identification of the pressed key is passed to the input port of a host device.

Kronberg, J.W.

1991-01-01T23:59:59.000Z

9

Remote-Reading Safety and Safeguards Surveillance System for 3013 Containers  

SciTech Connect (OSTI)

At Hanford's Plutonium Finishing Plant (PFP), plutonium oxide is being loaded into stainless steel containers for long-term storage on the Hanford Site. These containers consist of two weld-sealed stainless steel cylinders nested one within the other. A third container holds the plutonium within the inner cylinder. This design meets the U.S. Department of Energy (DOE) storage standard, DOE-STD- 3013-2000, which anticipates a 50-year storage lifetime. The 3013 standard also requires a container surveillance program to continuously monitor pressure and to assure safeguards are adequate. However, the configuration of the container system makes using conventional measurement and monitoring methods difficult. To better meet the 3013 monitoring requirements, a team from Fluor Hanford (who manages the PFP), Pacific Northwest National Laboratory (PNNL), and Vista Engineering Technologies, LLC, developed a safer, cost-efficient, remote PFP 3013 container surveillance system. This new surveillance system is a combination of two successfully deployed technologies: (1) a magnetically coupled pressure gauge developed by Vista Engineering and (2) a radio frequency (RF) tagging device developed by PNNL. This system provides continuous, 100% monitoring of critical parameters with the containers in place, as well as inventory controls. The 3013 container surveillance system consists of three main elements: (1) an internal magnetic pressure sensor package, (2) an instrument pod (external electronics package), and (3) a data acquisition storage and display computer. The surveillance system described in this paper has many benefits for PFP and DOE in terms of cost savings and reduced personnel exposure. In addition, continuous safety monitoring (i.e., internal container pressure and temperature) of every container is responsible nuclear material stewardship and fully meets and exceeds DOE's Integrated Surveillance Program requirements.

Lechelt, W. M.; Skorpik, J. R.; Silvers, K. L.; Szempruch, R. W.; Douglas, D. G.; Fein, K. O.

2002-02-26T23:59:59.000Z

10

English language learners' reading self-efficacy and achievement using 1:1 mobile learning devices  

E-Print Network [OSTI]

the singular user of the personal device, or it can be co-mobile learning devices are personal digital assistants (of mobile devices including tablet personal computers,

Walters, Jennifer L.

2012-01-01T23:59:59.000Z

11

Method and device for remotely monitoring an area using a low peak power optical pump  

DOE Patents [OSTI]

A method and device for remotely monitoring an area using a low peak power optical pump comprising one or more pumping sources, one or more lasers; and an optical response analyzer. Each pumping source creates a pumping energy. The lasers each comprise a high reflectivity mirror, a laser media, an output coupler, and an output lens. Each laser media is made of a material that emits a lasing power when exposed to pumping energy. Each laser media is optically connected to and positioned between a corresponding high reflectivity mirror and output coupler along a pumping axis. Each output coupler is optically connected to a corresponding output lens along the pumping axis. The high reflectivity mirror of each laser is optically connected to an optical pumping source from the one or more optical pumping sources via an optical connection comprising one or more first optical fibers.

Woodruff, Steven D.; Mcintyre, Dustin L.; Jain, Jinesh C.

2014-07-22T23:59:59.000Z

12

Device-independent quantum reading and noise-assisted quantum transmitters  

E-Print Network [OSTI]

In quantum reading, a quantum state of light (transmitter) is applied to read classical information. In the presence of noise or for sufficiently weak signals, quantum reading can outperform classical reading by enhanced state distinguishability. Here we show that the enhanced quantum efficiency depends on the presence in the transmitter of a particular type of quantum correlations, the discord of response. Different encodings and transmitters give rise to different levels of efficiency. Considering noisy quantum probes we show that squeezed thermal transmitters with non-symmetrically distributed noise among the field modes yield a higher quantum efficiency compared to coherent thermal quantum states. The noise-enhanced quantum advantage is a consequence of the discord of response being a non-decreasing function of increasing thermal noise under constant squeezing, a behavior that leads to an increased state distinguishability. We finally show that, for non-symmetric squeezed thermal states, the probability of error, as measured by the quantum Chernoff bound, vanishes asymptotically with increasing local thermal noise at finite global squeezing. Therefore, at fixed finite squeezing, noisy but strongly discordant quantum states with large noise imbalance between the field modes can outperform noisy classical resources as well as pure entangled transmitters with the same finite level of squeezing.

Wojciech Roga; Daniela Buono; Fabrizio Illuminati

2014-12-22T23:59:59.000Z

13

U-192: VMware Workstation/Player VM Remote Device Bug Lets Local...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

CD-ROM, keyboard) located on a physically separate system and the target virtual machine can cause the target virtual machine to crash. Impact: A local or remote user can...

14

Supplementary Material for A Microfluidic Device for Dry Sample Preservation in Remote Settings  

E-Print Network [OSTI]

than the improved press-fit system (Fig. S5), for clamping the device. Video keywords: diagnostics, which uses self-clamping parts (pins are press-fit into holes to create tension and hold the device

Ismagilov, Rustem F.

15

The under-machine inspection system consists of a remotely controlled robot. This device is capable of accessing hard-to-reach areas and deal with poor lighting conditions, thus decreasing the risk of injury for the inspection  

E-Print Network [OSTI]

. The system also contains shock absorbers in its wheels to deal with rough surfaces. The clamps used here special types of wheel to reduce vibrations during motion. Furthermore, ball wheels are used in this robot#12;The under-machine inspection system consists of a remotely controlled robot. This device

Koschan, Andreas

16

Remotely Deployed Virtual Sensors  

E-Print Network [OSTI]

Remotely Deployed Virtual Sensors TR-UTEDGE-2007-010 Sanem Kabadayi Christine Julien © Copyright 2007 The University of Texas at Austin #12;Remotely Deployed Virtual Sensors Sanem Kabadayi that run on mobile client devices connect to the sensors of a multihop sensor network. For emerging

Julien, Christine

17

Remote radiation dosimetry  

DOE Patents [OSTI]

Disclosed are methods and apparatus for remotely measuring radiation levels. Such are particularly useful for measuring relatively high levels or dosages of radiation being administered in radiation therapy. They are also useful for more general radiation level measurements where remote sensing from the remaining portions of the apparatus is desirable. The apparatus uses a beam generator, such as a laser beam, to provide a stimulating beam. The stimulating beam is preferably of wavelengths shorter than 6 microns, or more advantageously less than 2 microns. The stimulating beam is used to stimulate a remote luminescent sensor mounted in a probe which emits stored luminescent energy resulting from exposure of the sensor to ionizing radiation. The stimulating beam is communicated to the remote luminescent sensor via a transmissive fiber which also preferably serves to return the emission from the luminescent sensor. The stimulating beam is advantageously split by a beam splitter to create a detector beam which is measured for power during a reading period during which the luminescent phosphor is read. The detected power is preferably used to control the beam generator to thus produce desired beam power during the reading period. The luminescent emission from the remote sensor is communicated to a suitable emission detector, preferably after filtering or other selective treatment to better isolate the luminescent emission. 8 figures.

Braunlich, P.F.; Tetzlaff, W.; Hegland, J.E.; Jones, S.C.

1991-03-12T23:59:59.000Z

18

Remote switch actuator  

DOE Patents [OSTI]

The invention provides a device and method for actuating electrical switches remotely. The device is removably attached to the switch and is actuated through the transfer of a user's force. The user is able to remain physically removed from the switch site obviating need for protective equipment. The device and method allow rapid, safe actuation of high-voltage or high-current carrying electrical switches or circuit breakers.

Haas, Edwin Gerard; Beauman, Ronald; Palo, Jr., Stefan

2013-01-29T23:59:59.000Z

19

TacRead, or Tactile Readout Device, is a novel and affordable refreshable braille display. People with blindness perceive braille alphabets formed by  

E-Print Network [OSTI]

Read. It has been identified as a potential solution to the low-cost Braille display challenge modules have been developed, prototyped and tested. Efforts for fabrication of displays for large not only motivated and driven the process, but kept it pointed towards the right direction as well. About

Banerjee, Subhashis

20

Power consumption monitoring using additional monitoring device  

SciTech Connect (OSTI)

Today, emphasis is placed on reducing power consumption. Computers are large consumers; therefore it is important to know the total consumption of computing systems. Since their optimal functioning requires quite strict environmental conditions, without much variation in temperature and humidity, reducing energy consumption cannot be made without monitoring environmental parameters. Thus, the present work uses a multifunctional electric meter UPT 210 for power consumption monitoring. Two applications were developed: software which carries meter readings provided by electronic and programming facilitates remote device and a device for temperature monitoring and control. Following temperature variations that occur both in the cooling system, as well as the ambient, can reduce energy consumption. For this purpose, some air conditioning units or some computers are stopped in different time slots. These intervals were set so that the economy is high, but the work's Datacenter is not disturbed.

Tru?c?, M. R. C., E-mail: radu.trusca@itim-cj.ro; Albert, ?., E-mail: radu.trusca@itim-cj.ro; Tudoran, C., E-mail: radu.trusca@itim-cj.ro; Soran, M. L., E-mail: radu.trusca@itim-cj.ro; F?rca?, F., E-mail: radu.trusca@itim-cj.ro [National Institute for Research and Development of Isotopic and Molecular Technologies, 65-103 Donath, 400293 Cluj-Napoca (Romania); Abrudean, M. [Technical University of Cluj-Napoca, Cluj-Napoca (Romania)] [Technical University of Cluj-Napoca, Cluj-Napoca (Romania)

2013-11-13T23:59:59.000Z

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Remotely operated pipe connector  

DOE Patents [OSTI]

An apparatus for remotely assembling and disassembling a Graylock type coctor between a pipe and a closure for the pipe includes a base and a receptacle on the base for the closure. The pipe is moved into position vertically above the closure by a suitable positioning device such that the flange on the pipe is immediately adjacent and concentric with the flange on the closure. A moving device then moves two semicircular collars from a position free of the closure to a position such that the interior cam groove of each collar contacts the two flanges. Finally, a tensioning device automatically allows remote tightening and loosening of a nut and bolt assembly on each side of the collar to cause a seal ring located between the flanges to be compressed and to seal the closure. Release of the pipe and the connector is accomplished in the reverse order. Preferably, the nut and bolt assembly includes an elongate shaft portion on which a removable sleeve is located.

Josefiak, Leonard J. (Scotia, NY); Cramer, Charles E. (Guilderford, NY)

1988-01-01T23:59:59.000Z

22

U-240: Apple Remote Desktop Encryption Failure Lets Remote Users...  

Broader source: Energy.gov (indexed) [DOE]

0: Apple Remote Desktop Encryption Failure Lets Remote Users Obtain Potentially Sensitive Information U-240: Apple Remote Desktop Encryption Failure Lets Remote Users Obtain...

23

Rain sampling device  

DOE Patents [OSTI]

The present invention constitutes a rain sampling device adapted for independent operation at locations remote from the user which allows rainfall to be sampled in accordance with any schedule desired by the user. The rain sampling device includes a mechanism for directing wet precipitation into a chamber, a chamber for temporarily holding the precipitation during the process of collection, a valve mechanism for controllably releasing samples of the precipitation from the chamber, a means for distributing the samples released from the holding chamber into vessels adapted for permanently retaining these samples, and an electrical mechanism for regulating the operation of the device. 11 figures.

Nelson, D.A.; Tomich, S.D.; Glover, D.W.; Allen, E.V.; Hales, J.M.; Dana, M.T.

1991-05-14T23:59:59.000Z

24

Rain sampling device  

DOE Patents [OSTI]

The present invention constitutes a rain sampling device adapted for independent operation at locations remote from the user which allows rainfall to be sampled in accordance with any schedule desired by the user. The rain sampling device includes a mechanism for directing wet precipitation into a chamber, a chamber for temporarily holding the precipitation during the process of collection, a valve mechanism for controllably releasing samples of said precipitation from said chamber, a means for distributing the samples released from the holding chamber into vessels adapted for permanently retaining these samples, and an electrical mechanism for regulating the operation of the device.

Nelson, Danny A. (Richland, WA); Tomich, Stanley D. (Richland, WA); Glover, Donald W. (Prosser, WA); Allen, Errol V. (Benton City, WA); Hales, Jeremy M. (Kennewick, WA); Dana, Marshall T. (Richland, WA)

1991-01-01T23:59:59.000Z

25

Sandia National Laboratories: remote sensing devices  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1developmentturbineredox-active perovskite

26

Remote Access  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising ScienceRecentRegionalReliabilityScientificNationalRemote

27

High Temperature, High Pressure Devices for Zonal Isolation in...  

Open Energy Info (EERE)

remotely and autonomous deployable structures for space and our high temperature composite technology developed for downhole applications. These devices offer several...

28

Mobile Communication Device Allowance Authorization Form Revised: April 2011 MOBILE COMMUNICATION DEVICE ALLOWANCE AUTHORIZATION FORM  

E-Print Network [OSTI]

Mobile Communication Device Allowance Authorization Form Revised: April 2011 MOBILE COMMUNICATION list your CURRENT PLAN features: Mobile service provider Name: ________ Monthly Charge: $ Device.edu/policy/itc/FINAL%20Policy%20on%20Mobile%20Comm%20Devices.htm I have read the Mobile Communication Devices Policy

Dyer, Bill

29

FUNCTIONAL NEUROIMAGING STUDIES OF READING AND READING DISABILITY  

E-Print Network [OSTI]

FUNCTIONAL NEUROIMAGING STUDIES OF READING AND READING DISABILITY (DEVELOPMENTAL DYSLEXIA) Kenneth in develop- mental dyslexia. Reading disabled readers, relative to nonimpaired readers, demonstrate Reviews 2000;6:207­213. Key Words: dyslexia; neuroimaging; reading; lexical processing; phonol- ogy R

30

Experience with Remote Job Execution  

SciTech Connect (OSTI)

The Neutron Science Portal at Oak Ridge National Laboratory submits jobs to the TeraGrid for remote job execution. The TeraGrid is a network of high performance computers supported by the US National Science Foundation. There are eleven partner facilities with over a petaflop of peak computing performance and sixty petabytes of long-term storage. Globus is installed on a local machine and used for job submission. The graphical user interface is produced by java coding that reads an XML file. After submission, the status of the job is displayed in a Job Information Service window which queries globus for the status. The output folder produced in the scratch directory of the TeraGrid machine is returned to the portal with globus-url-copy command that uses the gridftp servers on the TeraGrid machines. This folder is copied from the stage-in directory of the community account to the user's results directory where the output can be plotted using the portal's visualization services. The primary problem with remote job execution is diagnosing execution problems. We have daily tests of submitting multiple remote jobs from the portal. When these jobs fail on a computer, it is difficult to diagnose the problem from the globus output. Successes and problems will be presented.

Lynch, Vickie E [ORNL; Cobb, John W [ORNL; Green, Mark L [ORNL; Kohl, James Arthur [ORNL; Miller, Stephen D [ORNL; Ren, Shelly [ORNL; Smith, Bradford C [ORNL; Vazhkudai, Sudharshan S [ORNL

2008-01-01T23:59:59.000Z

31

SUPERCONDUCTING DEVICES  

E-Print Network [OSTI]

communications. References Superconductor Applications: ~on all aspects of superconducting devices. IEEE Trans.on all aspects vf superconducting devices. The IBM Journal

Clarke, John

2014-01-01T23:59:59.000Z

32

SUPERCONDUCTING DEVICES  

E-Print Network [OSTI]

on all aspects of superconducting devices. IEEE Trans.on all aspects vf superconducting devices. The IBM JournalJ. Matisoo, The Superconducting Computer," Scientific

Clarke, John

2014-01-01T23:59:59.000Z

33

Video Game Device Haptic Interface for Robotic Arc Welding  

SciTech Connect (OSTI)

Recent advances in technology for video games have made a broad array of haptic feedback devices available at low cost. This paper presents a bi-manual haptic system to enable an operator to weld remotely using the a commercially available haptic feedback video game device for the user interface. The system showed good performance in initial tests, demonstrating the utility of low cost input devices for remote haptic operations.

Corrie I. Nichol; Milos Manic

2009-05-01T23:59:59.000Z

34

Grazing incidence angle based sensing approach integrated with fiber-optic Fourier transform infrared (FO-FTIR) spectroscopy for remote and label-free detection of medical device contaminations  

SciTech Connect (OSTI)

Contamination of medical devices has become a critical and prevalent public health safety concern since medical devices are being increasingly used in clinical practices for diagnostics, therapeutics and medical implants. The development of effective sensing methods for real-time detection of pathogenic contamination is needed to prevent and reduce the spread of infections to patients and the healthcare community. In this study, a hollow-core fiber-optic Fourier transform infrared spectroscopy methodology employing a grazing incidence angle based sensing approach (FO-FTIR-GIA) was developed for detection of various biochemical contaminants on medical device surfaces. We demonstrated the sensitivity of FO-FTIR-GIA sensing approach for non-contact and label-free detection of contaminants such as lipopolysaccharide from various surface materials relevant to medical device. The proposed sensing system can detect at a minimum loading concentration of approximately 0.7 ?g/cm{sup 2}. The FO-FTIR-GIA has the potential for the detection of unwanted pathogen in real time.

Hassan, Moinuddin, E-mail: moinuddin.hassan@fda.hhs.gov; Ilev, Ilko [Optical Therapeutics and Medical Nanophotonics Laboratory, Division of Biomedical Physics, Office of Science and Engineering Laboratories, Center for Devices and Radiological Health, U.S. Food and Drug Administration, Silver Spring, Maryland 20993 (United States)

2014-10-15T23:59:59.000Z

35

Remote Systems Design & Deployment  

SciTech Connect (OSTI)

The Pacific Northwest National Laboratory (PNNL) was tasked by Washington River Protection Solutions, LLC (WRPS) to provide information and lessons learned relating to the design, development and deployment of remote systems, particularly remote arm/manipulator systems. This report reflects PNNLs experience with remote systems and lays out the most important activities that need to be completed to successfully design, build, deploy and operate remote systems in radioactive and chemically contaminated environments. It also contains lessons learned from PNNLs work experiences, and the work of others in the national laboratory complex.

Bailey, Sharon A.; Baker, Carl P.; Valdez, Patrick LJ

2009-08-28T23:59:59.000Z

36

Daydreaming Devices  

E-Print Network [OSTI]

Daydreaming Devices is a project on aspects of daydream and the design of convertible furniture within the context of art. This thesis addresses the concepts and the design of two daydreaming devices developed during my ...

Da Ponte, Ana Sofia Lopes

2008-01-01T23:59:59.000Z

37

Smart Device Sensing Architectures and Applications Abstract--This paper illustrates the use of smart device sensors  

E-Print Network [OSTI]

of smart device sensors in various real time applications. Two types of sensor data processing architectures have been discussed. The on-device data processing architecture allows processing of the sensor architecture requires the device to send the sensor data to a remote server for further computation and action

Gesbert, David

38

Remote actuated valve implant  

SciTech Connect (OSTI)

Valve implant systems positionable within a flow passage, the systems having an inlet, an outlet, and a remotely activatable valve between the inlet and outlet, with the valves being operable to provide intermittent occlusion of the flow path. A remote field is applied to provide thermal or magnetic activation of the valves.

McKnight, Timothy E; Johnson, Anthony; Moise, Jr., Kenneth J; Ericson, Milton Nance; Baba, Justin S; Wilgen, John B; Evans, III, Boyd McCutchen

2014-02-25T23:59:59.000Z

39

ECE 451 -Fall 2011 Physics of Semiconductor Devices (3)  

E-Print Network [OSTI]

ECE 451 - Fall 2011 Physics of Semiconductor Devices (3) Electronics and Optoelectronics-Photon Scattering Processes (Optional) 18. Novel Optoelectronics and Electronics Devices (Optional) Structure on Semiconductor Physics and Device Physics, Draft Version (2010). Other Additional References or Readings: 1. J

Gilchrist, James F.

40

Remote machine engineering applications for nuclear facilities decommissioning  

SciTech Connect (OSTI)

Decontamination and decommissioning of a nuclear facility require the application of techniques that protect the worker and the enviroment from radiological contamination and radiation. Remotely operated portable robotic arms, machines, and devices can be applied. The use of advanced systems should enhance the productivity, safety, and cost facets of the efforts; remote automatic tooling and systems may be used on any job where job hazard and other factors justify application. Many problems based on costs, enviromental impact, health, waste generation, and political issues may be mitigated by use of remotely operated machines. The work that man can not do or should not do will have to be done by machines.

Toto, G.; Wyle, H.R.

1983-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Remote I/O : fast access to distant storage.  

SciTech Connect (OSTI)

As high-speed networks make it easier to use distributed resources, it becomes increasingly common that applications and their data are not colocated. Users have traditionally addressed this problem by manually staging data to and from remote computers. We argue instead for a new remote I/O paradigm in which programs use familiar parallel I/O interfaces to access remote file systems. In addition to simplifying remote execution, remote I/O can improve performance relative to staging by overlapping computation and data transfer or by reducing communication requirements. However, remote I/O also introduces new technical challenges in the areas of portability, performance, and integration with distributed computing systems. We propose techniques designed to address these challenges and describe a remote I/O library called RIO that we have developed to evaluate the effectiveness of these techniques. RIO addresses issues of portability by adopting the quasi-standard MPI-IO interface and by defining a RIO device and RIO server within the ADIO abstract I/O device architecture. It addresses performance issues by providing traditional I/O optimizations such as asynchronous operations and through implementation techniques such as buffering and message forwarding to off load communication overheads. RIO uses the Nexus communication library to obtain access to configuration and security mechanisms provided by the Globus wide area computing tool kit. Microbenchmarks and application experiments demonstrate that our techniques achieve acceptable performance in most situations and can improve turnaround time relative to staging.

Foster, I.; Kohr, D., Jr.; Krishnaiyer, R.; Mogill, J.

1997-12-17T23:59:59.000Z

42

Approved 10-06 Clemson University: Master of Education in Reading  

E-Print Network [OSTI]

coursework. II. Reading Teacher & Reading Consultant certifications + Reading Recovery Training Organizing and Supervising Reading Programs 3 hours READ 864 Teaching Secondary School Reading 3 hours READ Plan II. Reading Recovery Teacher, Reading Teacher & Reading Consultant READ 880 Reading Recovery

Stuart, Steven J.

43

Inertial impaction air sampling device  

DOE Patents [OSTI]

An inertial impactor is designed which is to be used in an air sampling device for collection of respirable size particles in ambient air. The device may include a graphite furnace as the impaction substrate in a small-size, portable, direct analysis structure that gives immediate results and is totally self-contained allowing for remote and/or personal sampling. The graphite furnace collects suspended particles transported through the housing by means of the air flow system, and these particles may be analyzed for elements, quantitatively and qualitatively, by atomic absorption spectrophotometry. 3 figs.

Dewhurst, K.H.

1990-05-22T23:59:59.000Z

44

Reading context in design  

E-Print Network [OSTI]

This study explores how, in the process of design, the reading of an existing order in the organizing features of a setting potentiates form. For this purpose, a design exercise on a site in the city of Jaipur in India has ...

Agrawal, Vivek

1993-01-01T23:59:59.000Z

45

Sealing device  

DOE Patents [OSTI]

A sealing device for sealing a gap between a dovetail of a bucket assembly and a rotor wheel is disclosed. The sealing device includes a cover plate configured to cover the gap and a retention member protruding from the cover plate and configured to engage the dovetail. The sealing device provides a seal against the gap when the bucket assemply is subjected to a centrifugal force.

Garcia-Crespo, Andres Jose

2013-12-10T23:59:59.000Z

46

FUEL DEVICE APPLICATION Use this application to request a fuel device to access the University of Michigan (U-M) Parking and Transportation  

E-Print Network [OSTI]

FUEL DEVICE APPLICATION Use this application to request a fuel device to access the University of Michigan (U-M) Parking and Transportation Services (PTS) service stations for fuel. A fuel device owned and managed by PTS Fleet Services equipped with an automated fuel device. Please read the Use

Kirschner, Denise

47

Reading Arendt in Iran/Reading Iran through Arendt: Speech,  

E-Print Network [OSTI]

Reading Arendt in Iran/Reading Iran through Arendt: Speech, Action, and the Question Arendt in Iran/Reading Iran through Arendt: Speech, Action, and the Question of Street Politics for Arendt readers in the postrevolutionary context of the Islamic Republic of Iran. Arendt's skepticism

Illinois at Chicago, University of

48

Electrochromic devices  

DOE Patents [OSTI]

An electrochromic device is disclosed having a selective ion transport layer which separates an electrochemically active material from an electrolyte containing a redox active material. The devices are particularly useful as large area architectural and automotive glazings due to there reduced back reaction.

Allemand, Pierre M. (Tucson, AZ); Grimes, Randall F. (Ann Arbor, MI); Ingle, Andrew R. (Tucson, AZ); Cronin, John P. (Tucson, AZ); Kennedy, Steve R. (Tuscon, AZ); Agrawal, Anoop (Tucson, AZ); Boulton, Jonathan M. (Tucson, AZ)

2001-01-01T23:59:59.000Z

49

Thermal Infrared Remote Sensing  

E-Print Network [OSTI]

Thermal Infrared Remote Sensing Thermal Infrared Remote Sensing #12;0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4 and x-ray Ultraviolet Infrared Microwave and radio waves Wavelength in meters (m) Electromagnetic.77 700 red limit 30k0.041 2.48 green500 near-infrared far infrared ultraviolet Thermal Infrare refers

50

Remote electrochemical sensor  

DOE Patents [OSTI]

An electrochemical sensor for remote detection, particularly useful for metal contaminants and organic or other compounds. The sensor circumvents technical difficulties that previously prevented in-situ remote operations. The microelectrode, connected to a long communications cable, allows convenient measurements of the element or compound at timed and frequent intervals and instrument/sample distances of ten feet to more than 100 feet. The sensor is useful for both downhole groundwater monitoring and in-situ water (e.g., shipboard seawater) analysis.

Wang, Joseph (Las Cruces, NM); Olsen, Khris (Richland, WA); Larson, David (Las Cruces, NM)

1997-01-01T23:59:59.000Z

51

Obfuscated authentication systems, devices, and methods  

DOE Patents [OSTI]

Embodiments of the present invention are directed toward authentication systems, devices, and methods. Obfuscated executable instructions may encode an authentication procedure and protect an authentication key. The obfuscated executable instructions may require communication with a remote certifying authority for operation. In this manner, security may be controlled by the certifying authority without regard to the security of the electronic device running the obfuscated executable instructions.

Armstrong, Robert C; Hutchinson, Robert L

2013-10-22T23:59:59.000Z

52

Electrical safety device  

DOE Patents [OSTI]

An electrical safety device for use in power tools that is designed to automatically discontinue operation of the power tool upon physical contact of the tool with a concealed conductive material. A step down transformer is used to supply the operating power for a disconnect relay and a reset relay. When physical contact is made between the power tool and the conductive material, an electrical circuit through the disconnect relay is completed and the operation of the power tool is automatically interrupted. Once the contact between the tool and conductive material is broken, the power tool can be quickly and easily reactivated by a reset push button activating the reset relay. A remote reset is provided for convenience and efficiency of operation.

White, David B. (Greenock, PA)

1991-01-01T23:59:59.000Z

53

Temperature differential detection device  

DOE Patents [OSTI]

A temperature differential detection device for detecting the temperature differential between predetermined portions of a container wall is disclosed as comprising a Wheatstone bridge circuit for detecting resistance imbalance with a first circuit branch having a first elongated wire element mounted in thermal contact with a predetermined portion of the container wall, a second circuit branch having a second elongated wire element mounted in thermal contact with a second predetermined portion of a container wall with the wire elements having a predetermined temperature-resistant coefficient, an indicator interconnected between the first and second branches remote from the container wall for detecting and indicating resistance imbalance between the first and second wire elements, and connector leads for electrically connecting the wire elements to the remote indicator in order to maintain the respective resistance value relationship between the first and second wire elements. The indicator is calibrated to indicate the detected resistance imbalance in terms of a temperature differential between the first and second wall portions. 2 figs.

Girling, P.M.

1986-04-22T23:59:59.000Z

54

Device Performance  

SciTech Connect (OSTI)

In the Device Performance group, within the National Center for Photovoltaic's Measurements and Characterization Division, we measure the performance of PV cells and modules with respect to standard reporting conditions--defined as a reference temperature (25 C), total irradiance (1000 Wm-2), and spectral irradiance distribution (IEC standard 60904-3). Typically, these are ''global'' reference conditions, but we can measure with respect to any reference set. To determine device performance, we conduct two general categories of measurements: spectral responsivity (SR) and current versus voltage (I-V). We usually perform these measurements using standard procedures, but we develop new procedures when required by new technologies. We also serve as an independent facility for verifying device performance for the entire PV community. We help the PV community solve its special measurement problems, giving advice on solar simulation, instrumentation for I-V measurements, reference cells, measurement procedures, and anomalous results. And we collaborate with researchers to analyze devices and materials.

Not Available

2006-06-01T23:59:59.000Z

55

Microchannel devices  

SciTech Connect (OSTI)

The fabrication of stainless steel microchannel heat exchangers was examined through microlamination, the process of diffusion bonding precision machined metallic foils. The influence of diffusion bonding parameters, as well as the device geometry on the strength of the bond between the foils and embedded channel integrity, was investigated. During diffusion bonding, high temperatures and/or pressures result in well bonded foils, but these conditions cause the embedded channels to deform, which will degrade the efficiency of fluid flow through the channels. Alternatively, low temperatures and/or pressures result in undeformed channels but weakly bonded foils. This causes failure of the device due to fluid leakage. Thus, a processing envelope exists for producing a sound device with no fluid leakage and no degradation of fluid flow properties. The theoretical limit on aspect ratio within two-fluid counter-flow microchannel heat exchangers was also investigated. A counter-flow device is comprised of alternating layers of microchannels, which allow the two fluids to flow in opposite directions separated by fins. A theoretical model for interpreting the span of the fin as a function of the fin thickness was established. The model was verified experimentally by fabricating specimens to simulate the counter-flow device. The results of these investigations were used to aid in the design and processing of prototype microchannel devices.

Alman, David E.; Wilson, Rick D.

2001-09-01T23:59:59.000Z

56

Automated internal pipe cutting device  

DOE Patents [OSTI]

The invention is a remotely controlled internal pipe cutting device primarily used for cutting pipes where the outside of the pipe is inaccessible at the line where the cut is to be made. The device includes an axial ram within a rotational cylinder which is enclosed in a housing. The housing is adapted for attachment to an open end of the pipe and for supporting the ram and cylinder in cantilever fashion within the pipe. A radially movable cutter, preferably a plasma arc torch, is attached to the distal end of the ram. A drive mechanism, containing motors and mechanical hardware for operating the ram and cylinder, is attached to the proximal end of the housing. The ram and cylinder provide for moving the cutter axially and circumferentially, and a cable assembly attached to a remote motor provide for the movement of the cutter radially, within the pipe. The control system can be adjusted and operated remotely to control the position and movement of the cutter to obtain the desired cut. The control system can also provide automatic standoff control for a plasma arc torch.

Godlewski, William J. (Clifton Park, NY); Haffke, Gary S. (Ballston Spa, NY); Purvis, Dale (Amsterdam, NY); Bashar, Ronald W. (Oakdale, CT); Jones, Stewart D. (Mechanicville, NY); Moretti, Jr., Henry (Cranston, RI); Pimentel, James (Warwick, RI)

2003-01-21T23:59:59.000Z

57

Microfabricated fuel heating value monitoring device  

DOE Patents [OSTI]

A microfabricated fuel heating value monitoring device comprises a microfabricated gas chromatography column in combination with a catalytic microcalorimeter. The microcalorimeter can comprise a reference thermal conductivity sensor to provide diagnostics and surety. Using microfabrication techniques, the device can be manufactured in production quantities at a low per-unit cost. The microfabricated fuel heating value monitoring device enables continuous calorimetric determination of the heating value of natural gas with a 1 minute analysis time and 1.5 minute cycle time using air as a carrier gas. This device has applications in remote natural gas mining stations, pipeline switching and metering stations, turbine generators, and other industrial user sites. For gas pipelines, the device can improve gas quality during transfer and blending, and provide accurate financial accounting. For industrial end users, the device can provide continuous feedback of physical gas properties to improve combustion efficiency during use.

Robinson, Alex L. (Albuquerque, NM); Manginell, Ronald P. (Albuquerque, NM); Moorman, Matthew W. (Albuquerque, NM)

2010-05-04T23:59:59.000Z

58

Remote connector development study  

SciTech Connect (OSTI)

Plutonium-uranium extraction (PUREX) connectors, the most common connectors used at the Hanford site, offer a certain level of flexibility in pipe routing, process system configuration, and remote equipment/instrument replacement. However, these desirable features have inherent shortcomings like leakage, high pressure drop through the right angle bends, and a limited range of available pipe diameters that can be connect by them. Costs for construction, maintenance, and operation of PUREX connectors seem to be very high. The PUREX connector designs include a 90{degree} bend in each connector. This increases the pressure drop and erosion effects. Thus, each jumper requires at least two 90{degree} bends. PUREX connectors have not been practically used beyond 100 (4 in.) inner diameter. This study represents the results of a survey on the use of remote pipe-connection systems in US and foreign plants. This study also describes the interdependence between connectors, remote handling equipment, and the necessary skills of the operators.

Parazin, R.J.

1995-05-01T23:59:59.000Z

59

WIPP - Public Reading Facilities  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption byAbout Printable Version Bookmark and Wind FOIA Public Reading

60

Demo: Uncovering Device Whispers in Smart Homes Simon Mayer, Christian Beckel, Bram Scheidegger, Claude Barthels, Gbor Srs  

E-Print Network [OSTI]

, for example, cold appliances can be remotely controlled by utility companies to adapt their cooling cycles to visualize data streams within the home network and to remote services. Our sys- tem requires and entertainment devices are be- ing connected to the Internet [6] and provide services such as remote monitoring

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Remote electrochemical sensor  

DOE Patents [OSTI]

An electrochemical sensor is described for remote detection, particularly useful for metal contaminants and organic or other compounds. The sensor circumvents technical difficulties that previously prevented in-situ remote operations. The microelectrode, connected to a long communications cable, allows convenient measurements of the element or compound at timed and frequent intervals and instrument/sample distances of ten feet to more than 100 feet. The sensor is useful for both downhole groundwater monitoring and in-situ water (e.g., shipboard seawater) analysis. 21 figs.

Wang, J.; Olsen, K.; Larson, D.

1997-10-14T23:59:59.000Z

62

Remote Sensor Placement  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298,NIST31 ORV 15051 ModificationRemoteSpectrum andRemote

63

Optical devices  

DOE Patents [OSTI]

An optical manifold for efficiently combining a plurality of blue LED outputs to illuminate a phosphor for a single, substantially homogeneous output, in a small, cost-effective package. Embodiments are disclosed that use a single or multiple LEDs and a remote phosphor, and an intermediate wavelength-selective filter arranged so that backscattered photoluminescence is recycled to boost the luminance and flux of the output aperture. A further aperture mask is used to boost phosphor luminance with only modest loss of luminosity. Alternative non-recycling embodiments provide blue and yellow light in collimated beams, either separately or combined into white.

Chaves, Julio C.; Falicoff, Waqidi; Minano, Juan C.; Benitez, Pablo; Dross, Oliver; Parkyn Jr., William A.

2010-07-13T23:59:59.000Z

64

Reading Acquisition, Developmental Dyslexia, and Skilled Reading Across Languages: A Psycholinguistic Grain Size Theory  

E-Print Network [OSTI]

Reading Acquisition, Developmental Dyslexia, and Skilled Reading Across Languages representations and accompanying differences in developmental reading strategies and the manifestation of dyslexia

Port, Robert

65

Vacuum Vessel Remote Handling  

E-Print Network [OSTI]

and Remote Handling 4 Vacuum vessel functions · Plasma vacuum environment · Primary tritium confinement, incl ports 65 tonnes - Weight of torus shielding 100 tonnes · Coolant - Normal Operation Water, Handling 12 Vessel octant subassembly fab. (3) · Octant-to-octant splice joint requires double wall weld

66

Detection device  

DOE Patents [OSTI]

The present invention is directed to a detection device comprising: (1) an entrance chamber; (2) a central chamber; and (3) an exit chamber. The central chamber includes an ionizing gas, anode, and means for connecting the anode with an external power supply and pulse counter.

Smith, J.E.

1981-02-27T23:59:59.000Z

67

Electrochemical device  

DOE Patents [OSTI]

A tunnel protected electrochemical device features channels fluidically communicating between manifold, tunnels and cells. The channels are designed to provide the most efficient use of auxiliary power. The channels have a greater hydraulic pressure drop and electrical resistance than the manifold. This will provide a design with the optimum auxiliary energy requirements.

Grimes, Patrick G. (Westfield, NJ); Einstein, Harry (Springfield, NJ); Bellows, Richard J. (Westfield, NJ)

1988-01-12T23:59:59.000Z

68

On-Road Remote Sensing of Heavy-duty Diesel Truck  

E-Print Network [OSTI]

On-Road Remote Sensing of Heavy-duty Diesel Truck Emissions in the Austin- San Marcos Area: August, HC, and NO to CO2 and to get percent opacity readings for heavy-duty diesel trucks with elevated. The fleet of these heavy-duty diesel trucks exhibits a distribution that is close to normal where the top 20

Denver, University of

69

Inertial impaction air sampling device  

DOE Patents [OSTI]

An inertial impactor to be used in an air sampling device for collection of respirable size particles in ambient air which may include a graphite furnace as the impaction substrate in a small-size, portable, direct analysis structure that gives immediate results and is totally self-contained allowing for remote and/or personal sampling. The graphite furnace collects suspended particles transported through the housing by means of the air flow system, and these particles may be analyzed for elements, quantitatively and qualitatively, by atomic absorption spectrophotometry. 3 figs.

Dewhurst, K.H.

1987-12-10T23:59:59.000Z

70

Assistive Devices for the Home  

E-Print Network [OSTI]

, replacing or modifying conventional knobs. The lever handle makes opening and closing doors easier. Some handles glow in the dark. a71 Pneumatic lift cushion. Helps raise one from a sitting to a standing position. The lift cushion is portable and can be used... called or emer- gency numbers can be programmed to dial with one button. a71 Telephone ring alerter. When a phone and lamp are plugged into the device, the lamp will flash with each ring of the phone. a71 Television remote control with large but- tons...

Harris, Janie

2002-01-31T23:59:59.000Z

71

Inertial impaction air sampling device  

DOE Patents [OSTI]

An inertial impactor to be used in an air sampling device for collection of respirable size particles in ambient air which may include a graphite furnace as the impaction substrate in a small-size, portable, direct analysis structure that gives immediate results and is totally self-contained allowing for remote and/or personal sampling. The graphite furnace collects suspended particles transported through the housing by means of the air flow system, and these particles may be analyzed for elements, quantitatively and qualitatively, by atomic absorption spectrophotometry.

Dewhurst, Katharine H. (13150 Wenonah SE. Apt. 727, Albuquerque, NM 87123)

1990-01-01T23:59:59.000Z

72

Nonlinear Adaptive Control of Networked Power Generators with Remote Measurement Units  

E-Print Network [OSTI]

provided by Phasor Measurement Units (PMU). The proposed control system is designed in a robust way illustrate its good behavior, and suggest that the new measurement and data transmission devices can bring Measurement Units (PMU). These devices are far beyond SCADA, and let one envisage the use of real time remote

Paris-Sud XI, Université de

73

Laser device  

DOE Patents [OSTI]

A laser device includes a virtual source configured to aim laser energy that originates from a true source. The virtual source has a vertical rotational axis during vertical motion of the virtual source and the vertical axis passes through an exit point from which the laser energy emanates independent of virtual source position. The emanating laser energy is collinear with an orientation line. The laser device includes a virtual source manipulation mechanism that positions the virtual source. The manipulation mechanism has a center of lateral pivot approximately coincident with a lateral index and a center of vertical pivot approximately coincident with a vertical index. The vertical index and lateral index intersect at an index origin. The virtual source and manipulation mechanism auto align the orientation line through the index origin during virtual source motion.

Scott, Jill R. (Idaho Falls, ID); Tremblay, Paul L. (Idaho Falls, ID)

2008-08-19T23:59:59.000Z

74

Remote Sensing Laboratory - RSL  

SciTech Connect (OSTI)

One of the primary resources supporting homeland security is the Remote Sensing Laboratory, or RSL. The Laboratory creates advanced technologies for emergency response operations, radiological incident response, and other remote sensing activities. RSL emergency response teams are on call 24-hours a day, and maintain the capability to deploy domestically and internationally in response to threats involving the loss, theft, or release of nuclear or radioactive material. Such incidents might include Nuclear Power Plant accidents, terrorist incidents involving nuclear or radiological materials, NASA launches, and transportation accidents involving nuclear materials. Working with the US Department of Homeland Security, RSL personnel equip, maintain, and conduct training on the mobile detection deployment unit, to provide nuclear radiological security at major national events such as the super bowl, the Indianapolis 500, New Year's Eve celebrations, presidential inaugurations, international meetings and conferences, just about any event where large numbers of people will gather.

None

2014-11-06T23:59:59.000Z

75

Remote Sensing Laboratory - RSL  

ScienceCinema (OSTI)

One of the primary resources supporting homeland security is the Remote Sensing Laboratory, or RSL. The Laboratory creates advanced technologies for emergency response operations, radiological incident response, and other remote sensing activities. RSL emergency response teams are on call 24-hours a day, and maintain the capability to deploy domestically and internationally in response to threats involving the loss, theft, or release of nuclear or radioactive material. Such incidents might include Nuclear Power Plant accidents, terrorist incidents involving nuclear or radiological materials, NASA launches, and transportation accidents involving nuclear materials. Working with the US Department of Homeland Security, RSL personnel equip, maintain, and conduct training on the mobile detection deployment unit, to provide nuclear radiological security at major national events such as the super bowl, the Indianapolis 500, New Year's Eve celebrations, presidential inaugurations, international meetings and conferences, just about any event where large numbers of people will gather.

None

2015-01-09T23:59:59.000Z

76

Remote repair appliance  

DOE Patents [OSTI]

A remote appliance for supporting a tool for performing work at a work site on a substantially circular bore of a work piece and for providing video signals of the work site to a remote monitor comprises: a base plate having an inner face and an outer face; a plurality of rollers, wherein each roller is rotatably and adjustably attached to the inner face of the base plate and positioned to roll against the bore of the work piece when the base plate is positioned against the mouth of the bore such that the appliance may be rotated about the bore in a plane substantially parallel to the base plate; a tool holding means for supporting the tool, the tool holding means being adjustably attached to the outer face of the base plate such that the working end of the tool is positioned on the inner face side of the base plate; a camera for providing video signals of the work site to the remote monitor; and a camera holding means for supporting the camera on the inner face side of the base plate, the camera holding means being adjustably attached to the outer face of the base plate. In a preferred embodiment, roller guards are provided to protect the rollers from debris and a bore guard is provided to protect the bore from wear by the rollers and damage from debris. 5 figs.

Heumann, F.K.; Wilkinson, J.C.; Wooding, D.R.

1997-12-16T23:59:59.000Z

77

Mobile Device Guide Google Android based devices  

E-Print Network [OSTI]

Mobile Device Guide ­ Google Android based devices CSUF Date Last Revised: 1/20/11 Page 1 of 3;Mobile Device Guide ­ Google Android based devices CSUF Date Last Revised: 1/20/11 Page 2 of 3 2. Under' with your campus username and enter your password (case sensitive). 4. Tap `next'. #12;Mobile Device Guide

de Lijser, Peter

78

Motor current signature analysis method for diagnosing motor operated devices  

DOE Patents [OSTI]

A motor current noise signature analysis method and apparatus for remotely monitoring the operating characteristics of an electric motor-operated device such as a motor-operated valve. Frequency domain signal analysis techniques are applied to a conditioned motor current signal to distinctly identify various operating parameters of the motor driven device from the motor current signature. The signature may be recorded and compared with subsequent signatures to detect operating abnormalities and degradation of the device. This diagnostic method does not require special equipment to be installed on the motor-operated device, and the current sensing may be performed at remote control locations, e.g., where the motor-operated devices are used in accessible or hostile environments.

Haynes, Howard D. (Kingston, TN); Eissenberg, David M. (Oak Ridge, TN)

1990-01-01T23:59:59.000Z

79

International House Collection / Stanley Read (collector)  

E-Print Network [OSTI]

International House Collection / Stanley Read (collector) Revised by Erwin Wodarczak (2010 (collector). - 1953-1955. 2 cm of textual records. Biographical Sketch Born in Quebec, Stanley Read earned

Handy, Todd C.

80

Electrochromic device  

DOE Patents [OSTI]

An electrochromic device includes a first substrate spaced from a second substrate. A first conductive member is formed over at least a portion of the first substrate. A first electrochromic material is formed over at least a portion of the first conductive member. The first electrochromic material includes an organic material. A second conductive member is formed over at least a portion of the second substrate. A second electrochromic material is formed over at least a portion of the second conductive member. The second electrochromic material includes an inorganic material. An ionic liquid is positioned between the first electrochromic material and the second electrochromic material.

Schwendemanm, Irina G. (Wexford, PA); Polcyn, Adam D. (Pittsburgh, PA); Finley, James J. (Pittsburgh, PA); Boykin, Cheri M. (Kingsport, TN); Knowles, Julianna M. (Apollo, PA)

2011-03-15T23:59:59.000Z

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

OLED devices  

DOE Patents [OSTI]

An OLED device having an emission layer formed of an ambipolar phosphine oxide host material and a dopant, a hole transport layer in electrical communication with an anode, an electron transport layer in communication with a cathode, wherein the HOMO energy of the hole transport layer is substantially the same as the HOMO energy of the ambipolar host in the emission layer, and the LUMO energy of the electron transport layer is substantially the same as the LUMO energy of the ambipolar host in the emission layer.

Sapochak, Linda Susan [Arlington, VA; Burrows, Paul Edward [Kennewick, WA; Bimalchandra, Asanga [Richland, WA

2011-02-22T23:59:59.000Z

82

Diversionary device  

DOE Patents [OSTI]

A diversionary device has a housing having at least one opening and containing a non-explosive propellant and a quantity of fine powder packed within the housing, with the powder being located between the propellant and the opening. When the propellant is activated, it has sufficient energy to propel the powder through the opening to produce a cloud of powder outside the housing. An igniter is also provided for igniting the cloud of powder to create a diversionary flash and bang, but at a low enough pressure to avoid injuring nearby people.

Grubelich, Mark C. (Albuquerque, NM)

2001-01-01T23:59:59.000Z

83

Interconnector device  

SciTech Connect (OSTI)

This patent describes an interconnector device that allows a lithium-type battery to be substituted for a Leclanche battery. The Leclanche battery is of predetermined dimensions and has a pair of coil spring connection terminals at predetermined locations on the top surface thereof. The lithium battery of different predetermined dimensions than the Lechanche battery and has a pair of female connection sockets positioned at a predetermined off-center location on the top surface. The locations of the coil spring terminals and the connection sockets of the respective batteries are at substantially different non-matching positions, comprising a thin flat water of non-conducive material of predetermined size and configuration, the wafer having the same cross-section dimensions as the Leclanche battery. A pair of prongs on the underside surface of the wafer and at locations correspond to the locations of the female connection sockets of the lithium battery. The prongs received into the female connection sockets when the interconnector device is mounted on the lithium batter. A pair of coil spring connection terminals mounted on the opposite of top surface of the wafer and having a configuration which matches that of the connection terminals of the Leclanche battery and positioned at locations which corresponds to the locations of the coil spring connection terminals of the Leclanche battery. A pair of electrical conductors plated on the underside surface of the wafer for respectively interconnecting the pairs of prongs and the pair of coil spring connection terminals in parallel.

Christopulos, J.A.

1987-07-07T23:59:59.000Z

84

REMOTE AND RURAL ENTERPRISE (RARE)  

E-Print Network [OSTI]

in remote central Australia is establishing a commercial aquaponics enterprise, a social entrepreneur, hospitality and horticulture. The current focus is on a commercial aquaponics enterprise and a cultural

Viglas, Anastasios

85

Control device for vehicle speed  

SciTech Connect (OSTI)

This patent describes a control device for vehicle speed comprising: a throttle driving means operatively coupled to a throttle valve of a vehicle; a set switch means for commanding memorization of the vehicle speed; a resume switch means for commanding read of the vehicle speed; a vehicle speed detecting means for generating a signal in accordance with the vehicle speed; a vehicle speed memory; an electronical control means for memorizing in the vehicle speed memory vehicle speed information corresponding to the signal obtained from the vehicle speed detecting means in response to actuation of the set switch means. The control means is also for reading out the content of the vehicle speed memory in response to actuation of the resume switch means to control the throttle driving means in accordance with the read-out content; a power supply means for supplying power to the electronical control means; and a power supply control switch means for controlling supply of power to the electronical control means in response to the state of at least one of the set switch means and the resume switch means and the state of the electronical control means. The improvement described here comprises the electronical control means sets the power supply control switch means into such a state that supply of power to the electronical control means is turned OFF, when vehicle speed information is not memorized in the vehicle speed memory.

Kawata, S.; Hyodo, H.

1987-03-03T23:59:59.000Z

86

U-192: VMware Workstation/Player VM Remote Device Bug Lets Local or Remote  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of EnergyTheTwo New Energy Storage6Scripting Attacks |ServiceUsers Deny

87

E-Print Network 3.0 - array device capable Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

8 Ad-hoc Wireless Sensor Networks CS 385 --Fall 2009 Course: Ad-hoc Wireless Sensor Networks (CS-385) Summary: - ing and remote sensing are tiny wireless computing devices...

88

Software Design 2 (Arduino Nano) BodyBody--RemotesRemotes  

E-Print Network [OSTI]

Software Design 2 (Arduino Nano) BodyBody--RemotesRemotes Gesture Based Appliance Control System the room Large wireless range, e.g. 100 m range with 1mW XBees Safely separate the Arduino from input ways to lower cost further Switch to Arduino Mini Light Develop our own wireless modules Jacob

Spletzer, John R.

89

Optoelectronic device  

DOE Patents [OSTI]

The invention is an optoelectronic device comprising an active portion which converts light to electricity or converts electricity to light, the active portion having a front side for the transmittal of the light and a back side opposite from the front side, at least two electrical leads to the active portion to convey electricity to or from the active portion, an enclosure surrounding the active portion and through which the at least two electrical leads pass wherein the hermetically sealed enclosure comprises at the front side of the active portion a barrier material which allows for transmittal of light, one or more getter materials disposed so as to not impede the transmission of light to or from the active portion, and a contiguous gap pathway to the getter material which pathway is disposed between the active portion and the barrier material.

Bonekamp, Jeffrey E.; Boven, Michelle L.; Gaston, Ryan S.

2014-09-09T23:59:59.000Z

90

Remote USB Ports  

E-Print Network [OSTI]

and actuators need to be installed in fields. A computer system with USB interfaces is required to be present at the location of USB device for its working. In industry, these sensors and actuators are scattered over a large geographical area. The computers...

Roshan, Rakesh

2013-10-01T23:59:59.000Z

91

Space and Remote Sensing (ISR-2)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 Space and Remote Sensing Developing and applying remote sensing capabilities to problems of global security and related sciences Contacts Group Leader Robert Shirey Email Deputy...

92

Laser device  

DOE Patents [OSTI]

A laser device includes a target position, an optical component separated a distance J from the target position, and a laser energy source separated a distance H from the optical component, distance H being greater than distance J. A laser source manipulation mechanism exhibits a mechanical resolution of positioning the laser source. The mechanical resolution is less than a spatial resolution of laser energy at the target position as directed through the optical component. A vertical and a lateral index that intersect at an origin can be defined for the optical component. The manipulation mechanism can auto align laser aim through the origin during laser source motion. The laser source manipulation mechanism can include a mechanical index. The mechanical index can include a pivot point for laser source lateral motion and a reference point for laser source vertical motion. The target position can be located within an adverse environment including at least one of a high magnetic field, a vacuum system, a high pressure system, and a hazardous zone. The laser source and an electro-mechanical part of the manipulation mechanism can be located outside the adverse environment. The manipulation mechanism can include a Peaucellier linkage.

Scott, Jill R. (Idaho Falls, ID); Tremblay, Paul L. (Idaho Falls, ID)

2007-07-10T23:59:59.000Z

93

Remote adjustable focus Raman spectroscopy probe  

DOE Patents [OSTI]

A remote adjustable focus Raman spectroscopy probe allows for analyzing Raman scattered light from a point of interest external probe. An environmental barrier including at least one window separates the probe from the point of interest. An optical tube is disposed adjacent to the environmental barrier and includes a long working length compound lens objective next to the window. A beam splitter and a mirror are at the other end. A mechanical means is used to translated the prove body in the X, Y, and Z directions resulting in a variable focus optical apparatus. Laser light is reflected by the beam splitter and directed toward the compound lens objective, then through the window and focused on the point of interest. Raman scattered light is then collected by the compound lens objective and directed through the beam splitter to a mirror. A device for analyzing the light, such as a monochrometer, is coupled to the mirror.

Schmucker, John E. (Hurt, VA); Blasi, Raymond J. (Harrison City, PA); Archer, William B. (Bethel Park, PA)

1999-01-01T23:59:59.000Z

94

Brain Bases of Reading Fluency in Typical Reading and Impaired Fluency in Dyslexia  

E-Print Network [OSTI]

Although the neural systems supporting single word reading are well studied, there are limited direct comparisons between typical and dyslexic readers of the neural correlates of reading fluency. Reading fluency deficits ...

Christodoulou, Joanna

95

University of Nevada, Reno Tree crown mortality associated with roads in the Lake Tahoe Basin: a remote  

E-Print Network [OSTI]

University of Nevada, Reno Tree crown mortality associated with roads in the Lake Tahoe Basin entitled Tree crown mortality associated with roads in the Lake Tahoe Basin: a remote sensing approach, Advisor Robert S. Nowak, Committee Member Wendy Calvin, Graduate School Representative Marsha H. Read, Ph

Weisberg, Peter J.

96

Medical Device Reliability BIOMATERIALS  

E-Print Network [OSTI]

NEMI Medical Electronics team to address short- and long-term reliability issues with medical devices. OurMedical Device Reliability BIOMATERIALS Our goal is to provide medical device manufacturers, and consistency of active implantable medical devices. These devices, including pacemakers, cardiac defibrillators

97

Radiation sensitive devices and systems for detection of radioactive materials and related methods  

DOE Patents [OSTI]

Radiation sensitive devices include a substrate comprising a radiation sensitive material and a plurality of resonance elements coupled to the substrate. Each resonance element is configured to resonate responsive to non-ionizing incident radiation. Systems for detecting radiation from a special nuclear material include a radiation sensitive device and a sensor located remotely from the radiation sensitive device and configured to measure an output signal from the radiation sensitive device. In such systems, the radiation sensitive device includes a radiation sensitive material and a plurality of resonance elements positioned on the radiation sensitive material. Methods for detecting a presence of a special nuclear material include positioning a radiation sensitive device in a location where special nuclear materials are to be detected and remotely interrogating the radiation sensitive device with a sensor.

Kotter, Dale K

2014-12-02T23:59:59.000Z

98

Connector device for building integrated photovoltaic device  

SciTech Connect (OSTI)

The present invention is premised upon a connector device and method that can more easily electrically connect a plurality of PV devices or photovoltaic system components and/or locate these devices/components upon a building structure. It also may optionally provide some additional sub-components (e.g. at least one bypass diode and/or an indicator means) and may enhance the serviceability of the device.

Keenihan, James R.; Langmaid, Joseph A.; Eurich, Gerald K.; Lesniak, Michael J.; Mazor, Michael H.; Cleereman, Robert J.; Gaston, Ryan S.

2014-06-03T23:59:59.000Z

99

Volatile organic compound sensing devices  

DOE Patents [OSTI]

Apparatus employing vapochromic materials in the form of inorganic double complex salts which change color reversibly when exposed to volatile organic compound (VOC) vapors is adapted for VOC vapor detection, VOC aqueous matrix detection, and selective VOC vapor detection. The basic VOC vapochromic sensor is incorporated in various devices such as a ground probe sensor, a wristband sensor, a periodic sampling monitor, a soil/water penetrometer, an evaporative purge sensor, and various vacuum-based sensors which are particularly adapted for reversible/reusable detection, remote detection, continuous monitoring, or rapid screening of environmental remediation and waste management sites. The vapochromic sensor is used in combination with various fiber optic arrangements to provide a calibrated qualitative and/or quantitative indication of the presence of VOCs. 15 figs.

Lancaster, G.D.; Moore, G.A.; Stone, M.L.; Reagen, W.K.

1995-08-29T23:59:59.000Z

100

Volatile organic compound sensing devices  

DOE Patents [OSTI]

Apparatus employing vapochromic materials in the form of inorganic double complex salts which change color reversibly when exposed to volatile organic compound (VOC) vapors is adapted for VOC vapor detection, VOC aqueous matrix detection, and selective VOC vapor detection. The basic VOC vapochromic sensor is incorporated in various devices such as a ground probe sensor, a wristband sensor, a periodic sampling monitor, a soil/water penetrometer, an evaporative purge sensor, and various vacuum-based sensors which are particularly adapted for reversible/reusable detection, remote detection, continuous monitoring, or rapid screening of environmental remediation and waste management sites. The vapochromic sensor is used in combination with various fiber optic arrangements to provide a calibrated qualitative and/or quantitative indication of the presence of VOCs.

Lancaster, Gregory D. (Idaho Falls, ID); Moore, Glenn A. (Idaho Falls, ID); Stone, Mark L. (Idaho Falls, ID); Reagen, William K. (Stillwater, MN)

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Operated device estimation framework  

E-Print Network [OSTI]

Protective device estimation is a challenging task because there are numerous protective devices present in a typical distribution system. Among various protective devices, auto-reclosers and fuses are the main overcurrent protection on distribution...

Rengarajan, Janarthanan

2009-05-15T23:59:59.000Z

102

Remote direct memory access  

DOE Patents [OSTI]

Methods, parallel computers, and computer program products are disclosed for remote direct memory access. Embodiments include transmitting, from an origin DMA engine on an origin compute node to a plurality target DMA engines on target compute nodes, a request to send message, the request to send message specifying a data to be transferred from the origin DMA engine to data storage on each target compute node; receiving, by each target DMA engine on each target compute node, the request to send message; preparing, by each target DMA engine, to store data according to the data storage reference and the data length, including assigning a base storage address for the data storage reference; sending, by one or more of the target DMA engines, an acknowledgment message acknowledging that all the target DMA engines are prepared to receive a data transmission from the origin DMA engine; receiving, by the origin DMA engine, the acknowledgement message from the one or more of the target DMA engines; and transferring, by the origin DMA engine, data to data storage on each of the target compute nodes according to the data storage reference using a single direct put operation.

Archer, Charles J.; Blocksome, Michael A.

2012-12-11T23:59:59.000Z

103

Module 4Module 4 CPU SchedulingCPU Scheduling Reading: Chapter 5Reading: Chapter 5Reading: Chapter 5Reading: Chapter 5  

E-Print Network [OSTI]

to execute, and then give the control to it If we want efficient resource utilization, we need CPU scheduling preemptive scheduling? DispatcherDispatcher Dispatcher module gives control of the CPU to the process1 Module 4Module 4 ­­ CPU SchedulingCPU Scheduling Reading: Chapter 5Reading: Chapter 5Reading

Stojmenovic, Ivan

104

Remote drill bit loader  

SciTech Connect (OSTI)

A drill bit loader is described for loading a tapered shank of a drill bit into a similarly tapered recess in the end of a drill spindle. The spindle has a transverse slot at the inner end of the recess. The end of the tapered shank of the drill bit has a transverse tang adapted to engage in the slot so that the drill bit will be rotated by the spindle. The loader is in the form of a cylinder adapted to receive the drill bit with the shank projecting out of the outer end of the cylinder. Retainer pins prevent rotation of the drill bit in the cylinder. The spindle is lowered to extend the shank of the drill bit into the recess in the spindle and the spindle is rotated to align the slot in the spindle with the tang on the shank. A spring unit in the cylinder is compressed by the drill bit during its entry into the recess of the spindle and resiliently drives the tang into the slot in the spindle when the tang and slot are aligned. In typical remote drilling operations, whether in hot cells or water pits, drill bits have been held using a collet or end mill type holder with set screws. In either case, to load or change a drill bit required the use master-slave manipulators to position the bits and tighten the collet or set screws. This requirement eliminated many otherwise useful work areas because they were not equipped with slaves, particularly in water pits.

Dokos, J.A.

1996-12-31T23:59:59.000Z

105

Assistive listening devices drive neuroplasticity in children with dyslexia  

E-Print Network [OSTI]

Assistive listening devices drive neuroplasticity in children with dyslexia Jane Hornickela Jolla, CA, and approved August 3, 2012 (received for review April 23, 2012) Children with dyslexia often on auditory neurophysiology and reading skills in children with dyslexia. FM system use reduced

106

Remotely Interrogated Passive Polarizing Dosimeter (RIPPeD).  

SciTech Connect (OSTI)

Conductive polymers have become an extremely useful class of materials for many optical applications. We have developed an electrochemical growth method for depositing highly conductive ({approx}100 S/cm) polypyrrole. Additionally, we have adapted advanced fabrication methods for use with the polypyrrole resulting in gratings with submicron features. This conductive polymer micro-wire grid provides an optical polarizer with unique properties. When the polymer is exposed to ionizing radiation, its conductivity is affected and the polarization properties of the device, specifically the extinction ratio, change in a corresponding manner. This change in polarization properties can be determined by optically interrogating the device, possibly from a remote location. The result is a passive radiation-sensitive sensor with very low optical visibility. The ability to interrogate the device from a safe standoff distance provides a device useful in potentially dangerous environments. Also, the passive nature of the device make it applicable in applications where external power is not available. We will review the polymer deposition, fabrication methods and device design and modeling. The characterization of the polymer's sensitivity to ionizing radiation and optical testing of infrared polarizers before and after irradiation will also be presented. These experimental results will highlight the usefulness of the conductive infrared polarizer to many security and monitoring applications.

Kemme, Shanalyn A.; Buller, Daniel L.; Dirk, Shawn M.; Boye, Robert R.; Samora, Sally; Washburn, Cody M.; Wheeler, David Roger

2008-09-01T23:59:59.000Z

107

T-573: Windows Remote Desktop Client DLL Loading Error Lets Remote Users Execute Arbitrary Code  

Broader source: Energy.gov [DOE]

A vulnerability was reported in Windows Remote Desktop Client. A remote user can cause arbitrary code to be executed on the target user's system.

108

Read  

E-Print Network [OSTI]

Iycamo frwl , .... h!ottI$. WMeh .... III ,... ..... ,..nIl -Thn ... rnony.11fIIII1 I hMl_ a11111. ~ by ~ Sir'lgh and Mark Thly, ond I """" rd wrtt t .. 'GhorrQ. PaiWwu' by D" nLllh C_ GIUIam. WNch ...... _IIII,... ... III,... __ 111 ___ 18 ,-, Th...

Fineprint Bookclub

2009-01-01T23:59:59.000Z

109

Image display device in digital TV  

DOE Patents [OSTI]

Disclosed is an image display device in a digital TV that is capable of carrying out the conversion into various kinds of resolution by using single bit map data in the digital TV. The image display device includes: a data processing part for executing bit map conversion, compression, restoration and format-conversion for text data; a memory for storing the bit map data obtained according to the bit map conversion and compression in the data processing part and image data inputted from an arbitrary receiving part, the receiving part receiving one of digital image data and analog image data; an image outputting part for reading the image data from the memory; and a display processing part for mixing the image data read from the image outputting part and the bit map data converted in format from the a data processing part. Therefore, the image display device according to the present invention can convert text data in such a manner as to correspond with various resolution, carry out the compression for bit map data, thereby reducing the memory space, and support text data of an HTML format, thereby providing the image with the text data of various shapes.

Choi, Seung Jong (Seoul, KR)

2006-07-18T23:59:59.000Z

110

Electromagnetic Radiation REFERENCE: Remote Sensing of  

E-Print Network [OSTI]

1 CHAPTER 2: Electromagnetic Radiation Principles REFERENCE: Remote Sensing of the Environment John;2 Electromagnetic Energy Interactions Energy recorded by remote sensing systems undergoes fundamental interactions, creating convectional currents in the atmosphere. c) Electromagnetic energy in the form of electromagnetic

Gilbes, Fernando

111

Reading File Bonneville Power Administration  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermalOxide Fuel CellsReaction ofReading File

112

10 January 2009 PHOTOGRAMMETRIC ENGINEERING & REMOTE SENSING High Performance Computing in Remote Sensing  

E-Print Network [OSTI]

10 January 2009 PHOTOGRAMMETRIC ENGINEERING & REMOTE SENSING High Performance Computing in Remote Book ReviewBook Review High Performance Computing in Remote Sensing introduces the most recent advances in the incorporation of the high-performance computing (HPC) paradigm in remote sensing missions. Eighteen well

Plaza, Antonio J.

113

Microfluidic gas flow profiling using remote detection NMR  

SciTech Connect (OSTI)

Miniaturized fluid handling devices have recently attracted considerable interest in many areas of science1. Such microfluidic chips perform a variety of functions, ranging from analysis of biological macromolecules2,3 to catalysis of reactions and sensing in the gas phase4,5. To enable precise fluid handling, accurate knowledge of the flow properties within these devices is important. Due to low Reynolds numbers, laminar flow is usually assumed. However, either by design or unintentionally, the flow characteristic in small channels is often altered, for example by surface interactions, viscous and diffusional effects, or electrical potentials. Therefore, its prediction is not always straight-forward6-8. Currently, most microfluidic flow measurements rely on optical detection of markers9,10, requiring the injection of tracers and transparent devices. Here, we show profiles of microfluidic gas flow in capillaries and chip devices obtained by NMR in the remote detection modality11,12. Through the transient measurement of dispersion13, NMR is well adaptable for non-invasive, yet sensitive determination of the flow field and provides a novel and potentially more powerful tool to profile flow in capillaries and miniaturized flow devices.

Hilty, Christian; McDonnell, Erin; Granwehr, Josef; Pierce,Kimberly; Han, Song-I Han; Pines, Alexander

2005-05-06T23:59:59.000Z

114

Connecting Remote Clusters with ATM  

SciTech Connect (OSTI)

Sandia's entry into utilizing clusters of networked workstations is called Computational Plant or CPlant for short. The design of CPlant uses Ethernet to boot the individual nodes, Myrinet to communicate within a node cluster, and ATM to connect between remote clusters. This SAND document covers the work done to enable the use of ATM on the CPlant nodes in the Fall of 1997.

Hu, T.C.; Wyckoff, P.S.

1998-10-01T23:59:59.000Z

115

The Remote Media Immersion (RMI)  

E-Print Network [OSTI]

the ultimate digital media delivery platform. Its streaming media server delivers multiple high- bandwidth aspects). The hope is that our advances in digital media delivery will enable new applicationsThe Remote Media Immersion (RMI) system blends multiple cutting- edge media technologies to create

Shahabi, Cyrus

116

Bipolar thermoelectric devices  

E-Print Network [OSTI]

The work presented here is a theoretical and experimental study of heat production and transport in bipolar electrical devices, with detailed treatment of thermoelectric effects. Both homojunction and heterojunction devices ...

Pipe, Kevin P. (Kevin Patrick), 1976-

2004-01-01T23:59:59.000Z

117

System and method for inventorying multiple remote objects  

DOE Patents [OSTI]

A system and method of inventorying multiple objects utilizing a multi-level or a chained radio frequency identification system. The system includes a master tag and a plurality of upper level tags and lower level tags associated with respective objects. The upper and lower level tags communicate with each other and the master tag so that reading of the master tag reveals the presence and absence of upper and lower level tags. In the chained RF system, the upper and lower level tags communicate locally with each other in a manner so that more remote tags that are out of range of some of the upper and lower level tags have their information relayed through adjacent tags to the master tag and thence to a controller.

Carrender, Curtis L. (Morgan Hill, CA); Gilbert, Ronald W. (Gilroy, CA)

2007-10-23T23:59:59.000Z

118

System and method for inventorying multiple remote objects  

DOE Patents [OSTI]

A system and method of inventorying multiple objects utilizing a multi-level or a chained radio frequency identification system. The system includes a master tag and a plurality of upper level tags and lower level tags associated with respective objects. The upper and lower level tags communicate with each other and the master tag so that reading of the master tag reveals the presence and absence of upper and lower level tags. In the chained RF system, the upper and lower level tags communicate locally with each other in a manner so that more remote tags that are out of range of some of the upper and lower level tags have their information relayed through adjacent tags to the master tag and thence to a controller.

Carrender, Curtis L. (Morgan Hill, CA); Gilbert, Ronald W. (Morgan Hill, CA)

2009-12-29T23:59:59.000Z

119

T-606: Sun Java System Access Manager Lets Remote Users Partially Modify Data and Remote Authenticated Users Partially Access Data  

Broader source: Energy.gov [DOE]

Sun Java System Access Manager Lets Remote Users Partially Modify Data and Remote Authenticated Users Partially Access Data.

120

Pulse flux measuring device  

DOE Patents [OSTI]

A device for measuring particle flux comprises first and second photodiode detectors for receiving flux from a source and first and second outputs for producing first and second signals representing the flux incident to the detectors. The device is capable of reducing the first output signal by a portion of the second output signal, thereby enhancing the accuracy of the device. Devices in accordance with the invention may measure distinct components of flux from a single source or fluxes from several sources.

Riggan, William C. (Albuquerque, NM)

1985-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Pulse detecting device  

DOE Patents [OSTI]

A device for measuring particle flux comprises first and second photodiode detectors for receiving flux from a source and first and second outputs for producing first and second signals representing the flux incident to the detectors. The device is capable of reducing the first output signal by a portion of the second output signal, thereby enhancing the accuracy of the device. Devices in accordance with the invention may measure distinct components of flux from a single source or fluxes from several sources.

Riggan, W.C.

1984-01-01T23:59:59.000Z

122

Contracting with reading costs and renegotiation costs  

E-Print Network [OSTI]

OF CALIFORNIA, SAN DIEGO Contracting with Reading Costs andrents, and the competitive contracting process. Journal ofReiche. Foundation of incomplete contracting in a model of

Brennan, James R.

2007-01-01T23:59:59.000Z

123

Articulating feedstock delivery device  

DOE Patents [OSTI]

A fully articulable feedstock delivery device that is designed to operate at pressure and temperature extremes. The device incorporates an articulating ball assembly which allows for more accurate delivery of the feedstock to a target location. The device is suitable for a variety of applications including, but not limited to, delivery of feedstock to a high-pressure reaction chamber or process zone.

Jordan, Kevin

2013-11-05T23:59:59.000Z

124

Organic photosensitive devices  

DOE Patents [OSTI]

The present invention generally relates to organic photosensitive optoelectronic devices. More specifically, it is directed to organic photosensitive optoelectronic devices having a photoactive organic region containing encapsulated nanoparticles that exhibit plasmon resonances. An enhancement of the incident optical field is achieved via surface plasmon polariton resonances. This enhancement increases the absorption of incident light, leading to a more efficient device.

Rand, Barry P; Forrest, Stephen R

2013-11-26T23:59:59.000Z

125

Amorphous silicon photovoltaic devices  

DOE Patents [OSTI]

This invention is a photovoltaic device comprising an intrinsic or i-layer of amorphous silicon and where the photovoltaic device is more efficient at converting light energy to electric energy at high operating temperatures than at low operating temperatures. The photovoltaic devices of this invention are suitable for use in high temperature operating environments.

Carlson, David E.; Lin, Guang H.; Ganguly, Gautam

2004-08-31T23:59:59.000Z

126

INFORMATION DEVICES AND  

E-Print Network [OSTI]

to access or hold sensitive, confidential or personal information on mobile devices, such as laptopsPROTECTION OF INFORMATION HELD ON MOBILE DEVICES AND ENCRYPTION POLICY (V3.5) the place of useful;Protection of Information Held on Mobile Devices and Encryption Policy (v3.5) Page 1 Table of Contents 1

Mottram, Nigel

127

MEASURING THE READING ABILITY OF INCOMING FRESHMEN: A PATH ANALYSIS INVESTIGATION INTO READING COMPREHENSION  

E-Print Network [OSTI]

Reading is a complex process involving numerous skills and abilities contributing to acquiring meaning from text. Individuals without the requisite reading skills will have difficulty not only in school but throughout their ...

Schuster, Jonathan

2012-05-31T23:59:59.000Z

128

Tracking Reading: Dual Task Costs of Oral Reading for Young Versus Older Adults  

E-Print Network [OSTI]

A digital pursuit rotor was used to monitor oral reading costs by time-locking tracking performance to the auditory wave form produced as young and older adults were reading out short paragraphs. Multilevel modeling was ...

Kemper, Susan; Bontempo, Daniel; Schmalzried, RaLynn Cheri; McKedy, Whitney; Tagliaferri, Bruno; Kieweg, Doug

2014-02-01T23:59:59.000Z

129

Memory device using movement of protons  

DOE Patents [OSTI]

An electrically written memory element is disclosed utilizing the motion of protons within a dielectric layer surrounded by layers on either side to confine the protons within the dielectric layer with electrode means attached to the surrounding layers to change the spatial position of the protons within the dielectric layer. The device is preferably constructed as a silicon-silicon dioxide-silicon layered structure with the protons being introduced to the structure laterally through the exposed edges of the silicon dioxide layer during a high temperature anneal in an atmosphere containing hydrogen gas. The device operates at low power, is preferably nonvolatile, is radiation tolerant, and is compatible with convention silicon MOS processing for integration with other microelectronic elements on the same silicon substrate. With the addition of an optically active layer, the memory element becomes an electrically written, optically read optical memory element. 19 figs.

Warren, W.L.; Vanheusden, K.J.R.; Fleetwood, D.M.; Devine, R.A.B.

1998-11-03T23:59:59.000Z

130

Memory device using movement of protons  

DOE Patents [OSTI]

An electrically written memory element utilizing the motion of protons within a dielectric layer surrounded by layers on either side to confine the protons within the dielectric layer with electrode means attached to the surrounding layers to change the spatial position of the protons within the dielectric layer. The device is preferably constructed as a silicon-silicon dioxide-silicon layered structure with the protons being introduced to the structure laterally through the exposed edges of the silicon dioxide layer during a high temperature anneal in an atmosphere containing hydrogen gas. The device operates at low power, is preferably nonvolatile, is radiation tolerant, and is compatible with convention silicon MOS processing for integration with other microelectronic elements on the same silicon substrate. With the addition of an optically active layer, the memory element becomes an electrically written, optically read optical memory element.

Warren, William L. (Albuquerque, NM); Vanheusden, Karel J. R. (Albuquerque, NM); Fleetwood, Daniel M. (Albuquerque, NM); Devine, Roderick A. B. (St. Martin le Vinoux, FR)

2000-01-01T23:59:59.000Z

131

Portable data collection device  

DOE Patents [OSTI]

The present invention provides a portable data collection device that has a variety of sensors that are interchangeable with a variety of input ports in the device. The various sensors include a data identification feature that provides information to the device regarding the type of physical data produced by each sensor and therefore the type of sensor itself. The data identification feature enables the device to locate the input port where the sensor is connected and self adjust when a sensor is removed or replaced. The device is able to collect physical data, whether or not a function of a time.

French, Patrick D. (Aurora, CO)

1996-01-01T23:59:59.000Z

132

Unitary lens semiconductor device  

DOE Patents [OSTI]

A unitary lens semiconductor device and method. The unitary lens semiconductor device is provided with at least one semiconductor layer having a composition varying in the growth direction for unitarily forming one or more lenses in the semiconductor layer. Unitary lens semiconductor devices may be formed as light-processing devices such as microlenses, and as light-active devices such as light-emitting diodes, photodetectors, resonant-cavity light-emitting diodes, vertical-cavity surface-emitting lasers, and resonant cavity photodetectors.

Lear, Kevin L. (Albuquerque, NM)

1997-01-01T23:59:59.000Z

133

Portable data collection device  

DOE Patents [OSTI]

The present invention provides a portable data collection device that has a variety of sensors that are interchangeable with a variety of input ports in the device. The various sensors include a data identification feature that provides information to the device regarding the type of physical data produced by each sensor and therefore the type of sensor itself. The data identification feature enables the device to locate the input port where the sensor is connected and self adjust when a sensor is removed or replaced. The device is able to collect physical data, whether or not a function of a time. 7 figs.

French, P.D.

1996-06-11T23:59:59.000Z

134

Equipment for Anti- Electricity Stealing with Remote Monitoring  

E-Print Network [OSTI]

AbstractThe power theft monitoring is an important research in electric power system, and electricity-stealing prevention became a big problem to the electricity board. based on the kind of electricity-stealing and actual demand of prevention of stealing electricity, the equipment of electricity-stealing with remote monitoring is designed, with PIC microcontroller as the control core. In this the standard energy meter and user energy meter are used to calculate and judge whether electricity-stealing happen or not. Results of the user application show that the system not only realizes monitoring the behavior of electricity stealing, accurately recording the time of electricity-stealing occur and finish, the quantity of electricity-stealing and sends the information to the area field man through SMS to detect the electricity-stealer, but also realizes the behavior of electricity-stealing with remote monitoring, which is convenient for centralized management.In addition, the system offers a solving method to the data of meter reading.

Mr. Sudheer K. Reddy; Mr. Musthafa. P; Mr. K. Sakthidhasan

135

Reading for Thursday Emissions scenario summary  

E-Print Network [OSTI]

emissions, for year 2000 #12;USA ­ CO2 emissions from fossil fuel combustion (2005) US EPA #12;#12;#12;Decreasing 13C strongly suggests that the source of atmospheric CO2 is fossil carbon #12;Line of evidence #1Reading for Thursday · Emissions scenario summary: ­ Read pages 3-6 · IPCC Chapter 11 (Regional

Schweik, Charles M.

136

Disposable remote zero headspace extractor  

DOE Patents [OSTI]

The remote zero headspace extractor uses a sampling container inside a stainless steel vessel to perform toxicity characteristics leaching procedure to analyze volatile organic compounds. The system uses an in line filter for ease of replacement. This eliminates cleaning and disassembly of the extractor. All connections are made with quick connect fittings which can be easily replaced. After use, the bag can be removed and disposed of, and a new sampling container is inserted for the next extraction.

Hand, Julie J. (Idaho Falls, ID); Roberts, Mark P. (Arco, ID)

2006-03-21T23:59:59.000Z

137

Mobile Device Guide Apple iPhone Devices  

E-Print Network [OSTI]

Mobile Device Guide ­ Apple iPhone Devices CSUF Date Last Revised: 1/20/11 Page 1 of 3 ConnectingPhone desktop. 1a. Expand `Mail, Contacts, Calendars' as shown. #12;Mobile Device Guide ­ Apple iPhone Devices (case sensitive). 4. Tap `next'. #12;Mobile Device Guide ­ Apple iPhone Devices CSUF Date Last Revised

de Lijser, Peter

138

Barrier breaching device  

DOE Patents [OSTI]

A barrier breaching device that is designed primarily for opening holes in interior walls of buildings uses detonating fuse for explosive force. The fuse acts as the ribs or spokes of an umbrella-like device that may be opened up to form a cone. The cone is placed against the wall so that detonating fuse that rings the base of the device and which is ignited by the spoke-like fuses serves to cut a circular hole in the wall.

Honodel, Charles A. (Tracy, CA)

1985-01-01T23:59:59.000Z

139

Barrier breaching device  

DOE Patents [OSTI]

A barrier breaching device that is designed primarily for opening holes in interior walls of buildings uses detonating fuse for explosive force. The fuse acts as the ribs or spokes of an umbrella-like device that may be opened up to form a cone. The cone is placed against the wall so that detonating fuse that rings the base of the device and which is ignited by the spoke-like fuses serves to cut a circular hole in the wall.

Honodel, C.A.

1983-06-01T23:59:59.000Z

140

T-573: Windows Remote Desktop Client DLL Loading Error Lets Remote...  

Broader source: Energy.gov (indexed) [DOE]

the target user opens a valid Remote Desktop configuration file (.rdp) from the same directory as the DLL file, the application may load the remote user's DLL instead of the...

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

The Effects of Rhetorical Reading Interventions on the Reading and Writing Performances of Students Enrolled in College Composition Classes  

E-Print Network [OSTI]

-experimental comparison and treatment group post test design that included four composition classes. The independent variable was the rhetorical reading intervention. The dependent variables included: student reading- writing connection surveys, the Accuplacer Reading...

Sanchez, Bernice Y.

2011-02-22T23:59:59.000Z

142

Man's Best Friend as a Reading Facilitator  

E-Print Network [OSTI]

and fuzzy program (Friesen, 2009). Small-scale studies of R.E.A.D. have consistently shown that R.E.A.D. improves students reading skill and motivation (Heyer, 2007; Martin, 2001). Heyer (2007), who was enrolled in a masters program with an emphasis..., address sanitation concerns. Ninth, inform colleagues, staff and families about the program. Tenth, prepare children and staff with an informative session. Eleventh, plan for the dogs safety and well-being. Twelfth, decide how expansive the program...

Shaw, Donita J.

2013-01-01T23:59:59.000Z

143

Mobile Device Management Android Device Enrollment  

E-Print Network [OSTI]

to manage your device. c. Enter your password. #12;d. Accept the Terms and Conditions e. You have completed. 2. Get Touchdown from Google Play a. Open up the Google Play Store. b. Search for Touchdown. c. Use the application. #12;3. Get Citrix Mobile Connect from Google Play a. Open up the Google Play Store. b. Search

144

Remote imaging of concealed objects  

SciTech Connect (OSTI)

Optical detection of objects hidden behind opaque screening layers is a challenging problem. We demonstrate an optically detected echographic-like method that combines collimated acoustic and laser beams. The acoustic waves cross the screening layers and their back-reflection from the hidden objects is detected through the analysis of a dynamic laser speckle pattern created at the outer surface of the screening layer. Real-time remote detection of moving targets 15 meters away, with a few mm resolutions is demonstrated using a very sensitive camera detection scheme.

Lev, Aner, E-mail: lev@soreq.gov.il; Sfez, Bruno, E-mail: lev@soreq.gov.il [Soreq NRC, Yavne, 81800 (Israel)

2014-05-27T23:59:59.000Z

145

Remote Access | The Ames Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298,NIST31 ORV 15051 ModificationRemote Access Ames

146

Remote Desktop | Argonne National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298,NIST31 ORV 15051 ModificationRemote Access

147

Remote Sensing R. E. Mcintosh  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298,NIST31 ORV 15051 ModificationRemote

148

Development of a Remotely Operated NDE System for Inspection of Hanford's Double Shell Waste Tank Knuckle Regions  

SciTech Connect (OSTI)

This report documents work performed at the PNNL in FY01 to support development of a Remotely Operated NDE (RONDE) system capable of inspecting the knuckle region of Hanford's DSTs. The development effort utilized commercial off-the-shelf (COTS) technology wherever possible and provided a transport and scanning device for implementing the SAFT and T-SAFT techniques.

Pardini, Allan F; Alzheimer, James M; Crawford, Susan L; Diaz, Aaron A; Gervais, Kevin L; Harris, Robert V; Riechers, Douglas M; Samuel, Todd J; Schuster, George J; Tucker, Joseph C

2001-09-28T23:59:59.000Z

149

Remote Sens. 2013, 5, 1484-1497; doi:10.3390/rs5031484 Remote Sensing  

E-Print Network [OSTI]

Remote Sens. 2013, 5, 1484-1497; doi:10.3390/rs5031484 Remote Sensing ISSN 2072-4292 www.mdpi.com/journal and the Community Land Model version 4 (CLM4), we investigated percent changes and controlling factors of global vegetation growth for the period 1982 to 2009. Over that 28-year period, both the remote-sensing estimate

Myneni, Ranga B.

150

Remote Sens. 2013, 5, 2857-2882; doi:10.3390/rs5062857 Remote Sensing  

E-Print Network [OSTI]

Remote Sens. 2013, 5, 2857-2882; doi:10.3390/rs5062857 Remote Sensing ISSN 2072-4292 www.mdpi.com/journal/remotesensing Article Evaluation of CLM4 Solar Radiation Partitioning Scheme Using Remote Sensing and Site Level FPAR.e., that of the Community Land Model version 4 (CLM4) with coupled carbon and nitrogen cycles. Taking advantage of a unique

Myneni, Ranga B.

151

CHAPTER 12:CHAPTER 12: Remote Sensing ofRemote Sensing of  

E-Print Network [OSTI]

- and middle-infrared regions, water bodies appear very dark even black becausebodies appear very dark, even and pure and contains little suspended sediment or organic matter. Water Penetration Cozumel Island1 CHAPTER 12:CHAPTER 12: Remote Sensing ofRemote Sensing of WaterWaterWaterWater REFERENCE: Remote

Gilbes, Fernando

152

Remote Sens. 2013, 5, 5173-5192; doi:10.3390/rs5105173 Remote Sensing  

E-Print Network [OSTI]

Remote Sens. 2013, 5, 5173-5192; doi:10.3390/rs5105173 Remote Sensing ISSN 2072-4292 www for a geosynchronous OPEN ACCESS #12;Remote Sens. 2013, 5 5174 satellite with modern imaging detectors, software, and algorithms able to detect heat from early and small fires, and yield minute-scale detection times. Keywords

Stephens, Scott L.

153

Remote Sens. 2013, 5, 5969-5998; doi:10.3390/rs5115969 Remote Sensing  

E-Print Network [OSTI]

Remote Sens. 2013, 5, 5969-5998; doi:10.3390/rs5115969 Remote Sensing ISSN 2072-4292 www, the technique presented in this paper would help them to quantify the impacts of OPEN ACCESS #12;Remote Sens; urban heat island effect; NDVI; artificial neural network; Markov chain; Dhaka 1. Introduction Urban

Crawford, Ian

154

Grey man devices  

E-Print Network [OSTI]

The Vision Slaved to Walking Device i s one in a series of devices that are a result of the experimental ambulation series. The ability to see only when one's feet are moving allows for a distorted perspective of ones own ...

Sethi, Sanjit (Sanjit Singh), 1971-

2002-01-01T23:59:59.000Z

155

Capillary interconnect device  

DOE Patents [OSTI]

An interconnecting device for connecting a plurality of first fluid-bearing conduits to a corresponding plurality of second fluid-bearing conduits thereby providing fluid communication between the first fluid-bearing conduits and the second fluid-bearing conduits. The device includes a manifold and one or two ferrule plates that are held by compressive axial forces.

Renzi, Ronald F

2013-11-19T23:59:59.000Z

156

Self-actuated device  

DOE Patents [OSTI]

A self-actuated device, of particular use as a valve or an orifice for nuclear reactor fuel and blanket assemblies, in which a gas produced by a neutron induced nuclear reaction gradually accumulates as a function of neutron fluence. The gas pressure increase occasioned by such accumulation of gas is used to actuate the device.

Hecht, Samuel L. (Richland, WA)

1984-01-01T23:59:59.000Z

157

Fluidic nanotubes and devices  

DOE Patents [OSTI]

Fluidic nanotube devices are described in which a hydrophilic, non-carbon nanotube, has its ends fluidly coupled to reservoirs. Source and drain contacts are connected to opposing ends of the nanotube, or within each reservoir near the opening of the nanotube. The passage of molecular species can be sensed by measuring current flow (source-drain, ionic, or combination). The tube interior can be functionalized by joining binding molecules so that different molecular species can be sensed by detecting current changes. The nanotube may be a semiconductor, wherein a tubular transistor is formed. A gate electrode can be attached between source and drain to control current flow and ionic flow. By way of example an electrophoretic array embodiment is described, integrating MEMs switches. A variety of applications are described, such as: nanopores, nanocapillary devices, nanoelectrophoretic, DNA sequence detectors, immunosensors, thermoelectric devices, photonic devices, nanoscale fluidic bioseparators, imaging devices, and so forth.

Yang, Peidong (El Cerrito, CA); He, Rongrui (El Cerrito, CA); Goldberger, Joshua (Berkeley, CA); Fan, Rong (El Cerrito, CA); Wu, Yiying (Albany, CA); Li, Deyu (Albany, CA); Majumdar, Arun (Orinda, CA)

2010-01-10T23:59:59.000Z

158

Fluidic nanotubes and devices  

DOE Patents [OSTI]

Fluidic nanotube devices are described in which a hydrophilic, non-carbon nanotube, has its ends fluidly coupled to reservoirs. Source and drain contacts are connected to opposing ends of the nanotube, or within each reservoir near the opening of the nanotube. The passage of molecular species can be sensed by measuring current flow (source-drain, ionic, or combination). The tube interior can be functionalized by joining binding molecules so that different molecular species can be sensed by detecting current changes. The nanotube may be a semiconductor, wherein a tubular transistor is formed. A gate electrode can be attached between source and drain to control current flow and ionic flow. By way of example an electrophoretic array embodiment is described, integrating MEMs switches. A variety of applications are described, such as: nanopores, nanocapillary devices, nanoelectrophoretic, DNA sequence detectors, immunosensors, thermoelectric devices, photonic devices, nanoscale fluidic bioseparators, imaging devices, and so forth.

Yang, Peidong (Berkeley, CA); He, Rongrui (El Cerrito, CA); Goldberger, Joshua (Berkeley, CA); Fan, Rong (El Cerrito, CA); Wu, Yiying (Albany, CA); Li, Deyu (Albany, CA); Majumdar, Arun (Orinda, CA)

2008-04-08T23:59:59.000Z

159

Device for cutting protrusions  

DOE Patents [OSTI]

An apparatus for clipping a protrusion of material is provided. The protrusion may, for example, be a bolt head, a nut, a rivet, a weld bead, or a temporary assembly alignment tab protruding from a substrate surface of assembled components. The apparatus typically includes a cleaver having a cleaving edge and a cutting blade having a cutting edge. Generally, a mounting structure configured to confine the cleaver and the cutting blade and permit a range of relative movement between the cleaving edge and the cutting edge is provided. Also typically included is a power device coupled to the cutting blade. The power device is configured to move the cutting edge toward the cleaving edge. In some embodiments the power device is activated by a momentary switch. A retraction device is also generally provided, where the retraction device is configured to move the cutting edge away from the cleaving edge.

Bzorgi, Fariborz M. (Knoxville, TN)

2011-07-05T23:59:59.000Z

160

Remotely readable fiber optic compass  

DOE Patents [OSTI]

A remotely readable fiber optic compass. A sheet polarizer is affixed to a magnet rotatably mounted in a compass body, such that the polarizer rotates with the magnet. The optical axis of the sheet polarizer is preferably aligned with the north-south axis of the magnet. A single excitation light beam is divided into four identical beams, two of which are passed through the sheet polarizer and through two fixed polarizing sheets which have their optical axes at right angles to one another. The angle of the compass magnet with respect to a fixed axis of the compass body can be determined by measuring the ratio of the intensities of the two light beams. The remaining ambiguity as to which of the four possible quadrants the magnet is pointing to is resolved by the second pair of light beams, which are passed through the sheet polarizer at positions which are transected by two semicircular opaque strips formed on the sheet polarizer. The incoming excitation beam and the four return beams are communicated by means of optical fibers, giving a remotely readable compass which has no electrical parts.

Migliori, Albert (Santa Fe, NM); Swift, Gregory W. (Los Alamos, NM); Garrett, Steven L. (Pebble Beach, CA)

1986-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

De Novo Sequencing with Short Reads: Does the Read Length Matter? (2009 JGI User Meeting)  

ScienceCinema (OSTI)

Pavel Pevzner of UC San Diego spoke about "De Novo Sequencing with Short Reads" on March 26, 2009 during the 4th Annual User Meeting

Pezner, Pavel A

2011-04-25T23:59:59.000Z

162

V-202: Cisco Video Surveillance Manager Bugs Let Remote Users...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

TE Bugs Let Remote Users Deny Service and Remote Adjacent Authenticated Users Gain Root Shell Access V-076: Cisco Wireless LAN Controller Bugs Let Remote Users Deny Service and...

163

U-074: Microsoft .NET Bugs Let Remote Users Execute Arbitrary...  

Broader source: Energy.gov (indexed) [DOE]

4: Microsoft .NET Bugs Let Remote Users Execute Arbitrary Commands, Access User Accounts, and Redirect Users U-074: Microsoft .NET Bugs Let Remote Users Execute Arbitrary Commands,...

164

V-149: Microsoft Internet Explorer Object Access Bug Lets Remote...  

Broader source: Energy.gov (indexed) [DOE]

CDwnBindInfo Object Reuse Flaw Lets Remote Users Execute Arbitrary Code U-047: Siemens Automation License Manager Bugs Let Remote Users Deny Service or Execute Arbitrary...

165

U-031: Microsoft Active Directory CRL Validation Flaw Lets Remote...  

Broader source: Energy.gov (indexed) [DOE]

1: Microsoft Active Directory CRL Validation Flaw Lets Remote Users Bypass Authentication U-031: Microsoft Active Directory CRL Validation Flaw Lets Remote Users Bypass...

166

V-103: RSA Authentication Agent Lets Remote Users Bypass Authenticatio...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

RSA Authentication Agent Lets Remote Users Bypass Authentication Requirements March 4, 2013 - 12:27am Addthis PROBLEM: RSA Authentication Agent Lets Remote Users Bypass...

167

V-150: Apache VCL Input Validation Flaw Lets Remote Authenticated...  

Broader source: Energy.gov (indexed) [DOE]

Tomcat FORM Authenticator Lets Remote Users Conduct Session Fixation Attacks U-084: Cisco Digital Media Manager Lets Remote Authenticated Users Gain Elevated Privileges U-233:...

168

U-010:HP Onboard Administrator Unspecified Flaw Lets Remote Users...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

HP Service Manager Unspecified Flaw Lets Remote Users Gain Unauthorized Access V-120: EMC Smarts Network Configuration Manager Java RMI Access Control Flaw Lets Remote Users...

169

Equitable Access: Remote and Rural Communities 'Transport Needs...  

Open Energy Info (EERE)

Equitable Access: Remote and Rural Communities 'Transport Needs' Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Equitable Access: Remote and Rural Communities...

170

U-137: HP Performance Manager Unspecified Bug Lets Remote Users...  

Broader source: Energy.gov (indexed) [DOE]

7: HP Performance Manager Unspecified Bug Lets Remote Users Execute Arbitrary Codes U-137: HP Performance Manager Unspecified Bug Lets Remote Users Execute Arbitrary Codes March...

171

availiable remote sensing: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Remote SensingThermal Infrared Remote Sensing Thermal infrared) and thermal infrared energy (3.0 - 14 m). However, thermal infrared sensors allow humans to sense 2 Thermal...

172

Wireless device monitoring systems and monitoring devices, and associated methods  

DOE Patents [OSTI]

Wireless device monitoring systems and monitoring devices include a communications module for receiving wireless communications of a wireless device. Processing circuitry is coupled with the communications module and configured to process the wireless communications to determine whether the wireless device is authorized or unauthorized to be present at the monitored area based on identification information of the wireless device. Methods of monitoring for the presence and identity of wireless devices are also provided.

McCown, Steven H; Derr, Kurt W; Rohde, Kenneth W

2014-05-27T23:59:59.000Z

173

Multimaterial rectifying device fibers  

E-Print Network [OSTI]

Electronic and optoelectronic device processing is commonly thought to be incompatible with much simpler thermal drawing techniques used in optical fiber production. The incorporation of metals, polymer insulators, and ...

Orf, Nicholas D

2009-01-01T23:59:59.000Z

174

Instructions for using read_cips_file.sav to read CIPS data files Last updated 29 June 2011  

E-Print Network [OSTI]

Instructions for using read_cips_file.sav to read CIPS data files Last updated 29 June 2011 The file read_cips_file.sav is provided as a convenience for IDL users to read CIPS netcdf data files for levels 2 (orbit strips) and 3a (daily daisies). (1) Download the CIPS data files into a convenient

Mojzsis, Stephen J.

175

Electronic security device  

DOE Patents [OSTI]

The present invention relates to a security device having a control box containing an electronic system and a communications loop over which the system transmits a signal. The device is constructed so that the communications loop can extend from the control box across the boundary of a portal such as a door into a sealed enclosure into which access is restricted whereby the loop must be damaged or moved in order for an entry to be made into the enclosure. The device is adapted for detecting unauthorized entries into such enclosures such as rooms or containers and for recording the time at which such entries occur for later reference. Additionally, the device detects attempts to tamper or interfere with the operation of the device itself and records the time at which such events take place. In the preferred embodiment, the security device includes a microprocessor-based electronic system and a detection module capable of registering changes in the voltage and phase of the signal transmitted over the loop. 11 figs.

Eschbach, E.A.; LeBlanc, E.J.; Griffin, J.W.

1992-03-17T23:59:59.000Z

176

Remote NMR/MRI detection of laser polarized gases  

DOE Patents [OSTI]

An apparatus and method for remote NMR/MRI spectroscopy having an encoding coil with a sample chamber, a supply of signal carriers, preferably hyperpolarized xenon and a detector allowing the spatial and temporal separation of signal preparation and signal detection steps. This separation allows the physical conditions and methods of the encoding and detection steps to be optimized independently. The encoding of the carrier molecules may take place in a high or a low magnetic field and conventional NMR pulse sequences can be split between encoding and detection steps. In one embodiment, the detector is a high magnetic field NMR apparatus. In another embodiment, the detector is a superconducting quantum interference device. A further embodiment uses optical detection of Rb--Xe spin exchange. Another embodiment uses an optical magnetometer using non-linear Faraday rotation. Concentration of the signal carriers in the detector can greatly improve the signal to noise ratio.

Pines, Alexander; Saxena, Sunil; Moule, Adam; Spence, Megan; Seeley, Juliette A.; Pierce, Kimberly L.; Han, Song-I; Granwehr, Josef

2006-06-13T23:59:59.000Z

177

Public Invited to Comment on Draft Environmental Assessment for Replacement Capability for Disposal of Remote-Handled Low Level Radioactive Waste Generated at the U.S. Department of Energys Idaho Site  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy invites the public to read and comment on a draft environmental assessment it has prepared, for a proposal to provide a replacement capability for continued disposal of remote-handled low-level radioactive waste that is generated at the Idaho National Laboratory site.

178

Heating remote rooms in passive solar buildings  

SciTech Connect (OSTI)

Remote rooms can be effectively heated by convection through a connecting doorway. A simple steady-state equation is developed for design purposes. Validation of a dynamic model is achieved using data obtained over a 13-day period. Dynamic effects are investigated using a simulation analysis for three different cases of driving temperature; the effect is to reduce the temperature difference between the driving room and the remote room compared to the steady-state model. For large temperature swings in the driving room a strategy which uses the intervening door in a diode mode is effective. The importance of heat-storing mass in the remote room is investigated.

Balcomb, J.D.

1981-01-01T23:59:59.000Z

179

Electrical apparatus lockout device  

SciTech Connect (OSTI)

A simple lockout device for electrical equipment equipped with recessed power blades is described. The device comprises a face-plate (12) having a threaded member (14) attached thereto and apertures suitable for accommodating the power blades of a piece of electrical equipment, an elastomeric nose (16) abutting the face-plate having a hole for passage of the threaded member therethrough and power blade apertures in registration with those of the face-plate, a block (20) having a recess (34) in its forward face for receiving at least a portion of the hose, a hole therein for receiving the threaded member and an integral extension (26) extending from its rear face. A thumb screw (22) suitable for turning with the hands and having internal threads suitable for engaging the threaded member attached to the face-plate is inserted into a passage in the integral extension to engage the threaded member in such a fashion that when the device is inserted over the recessed power blades of a piece of electrical equipment and the thumb screw (22) tightened, the elastomeric nose (16) is compressed between the face-plate (12) and the block (20) forcing it to expand laterally thereby securing the device in the recess and precluding the accidental or intentional energization of the piece of equipment by attachment of a power cord to the recessed power blades. Means are provided in the interval extension and the thumb screw for the attachment of a locking device (46) which will satisfy OSHA standards.

Gonzales, R.

1999-10-12T23:59:59.000Z

180

Electrical apparatus lockout device  

DOE Patents [OSTI]

A simple lockout device for electrical equipment equipped with recessed power blades is described. The device comprises a face-plate (12) having a threaded member (14) attached thereto and apertures suitable for accommodating the power blades of a piece of electrical equipment, an elastomeric nose (16) abutting the face-plate having a hole for passage of the threaded member therethrough and power blade apertures in registration with those of the face-plate, a block (20) having a recess (34) in its forward face for receiving at least a portion of the hose, a hole therein for receiving the threaded member and an integral extension (26) extending from its rear face. A thumb screw (22) suitable for turning with the hands and having internal threads suitable for engaging the threaded member attached to the face-plate is inserted into a passage in the integral extension to engage the threaded member in such a fashion that when the device is inserted over the recessed power blades of a piece of electrical equipment and the thumb screw (22) tightened, the elastomeric nose (16) is compressed between the face-plate (12) and the block (20) forcing it to expand laterally thereby securing the device in the recess and precluding the accidental or intentional energization of the piece of equipment by attachment of a power cord to the recessed power blades. Means are provided in the interval extension and the thumb screw for the attachment of a locking device (46) which will satisfy OSHA standards.

Gonzales, Rick (Chesapeake, VA)

1999-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Spectral tailoring device  

DOE Patents [OSTI]

A spectral tailoring device for altering the neutron energy spectra and flux of neutrons in a fast reactor thereby selectively to enhance or inhibit the transmutation rate of a target metrical to form a product isotope. Neutron moderators, neutron filters, neutron absorbers and neutron reflectors may be used as spectral tailoring devices. Depending on the intended use for the device, a member from each of these four classes of materials could be used singularly, or in combination, to provide a preferred neutron energy spectra and flux of the neutrons in the region of the target material. In one embodiment of the invention, an assembly is provided for enhancing the production of isotopes, such as cobalt 60 and gadolinium 153. In another embodiment of the invention, a spectral tailoring device is disposed adjacent a target material which comprises long lived or volatile fission products and the device is used to shift the neutron energy spectra and flux of neutrons in the region of the fission products to preferentially transmute them to produce a less volatile fission product inventory. 6 figs.

Brager, H.R.; Schenter, R.E.; Carter, L.L.; Karnesky, R.A.

1987-08-05T23:59:59.000Z

182

On-road remote sensing of vehicle emissions in  

E-Print Network [OSTI]

On-road remote sensing of vehicle emissions in the Auckland Region August 2003 Technical 1877353000 www.arc.govt.nz #12;TP 198 On-Road Remote Sensing of Vehicle Emissions in the Auckland Region #12;Page i TP 198 On-Road Remote Sensing of Vehicle Emissions in the Auckland Region On-road remote sensing

Denver, University of

183

U-203: HP Photosmart Bug Lets Remote Users Deny Service  

Broader source: Energy.gov [DOE]

A vulnerability was reported in HP Photosmart. A remote user can cause denial of service conditions.

184

Remote-handled transuranic system assessment appendices. Volume 2  

SciTech Connect (OSTI)

Volume 2 of this report contains six appendices to the report: Inventory and generation of remote-handled transuranic waste; Remote-handled transuranic waste site storage; Characterization of remote-handled transuranic waste; RH-TRU waste treatment alternatives system analysis; Packaging and transportation study; and Remote-handled transuranic waste disposal alternatives.

NONE

1995-11-01T23:59:59.000Z

185

applied remote sensing: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Thermal Infrared Remote Sensing Thermal Infrared Remote Sensing 12;0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4 Infrared Remote SensingThermal Infrared Remote SensingThermal Infrared...

186

U-176: Wireshark Multiple Bugs Let Remote Users Deny Service  

Broader source: Energy.gov [DOE]

Several vulnerabilities were reported in Wireshark. A remote user can cause denial of service conditions.

187

"Whiskbrooms" and"Pushbrooms" Remote Sensing Platforms and Sensors  

E-Print Network [OSTI]

"Whiskbrooms" and"Pushbrooms" Remote Sensing Platforms and Sensors Remote sensing requires that a sensor be constructed and then attached to a platform that provides an aerial view of the landscape. "Whiskbrooms" and"Pushbrooms" Remote Sensing Platforms and Sensors Remote sensing requires that a sensor

Frank, Thomas D.

188

Biochip scanner device  

DOE Patents [OSTI]

A biochip scanner device used to detect and acquire fluorescence signal data from biological microchips or biochips and method of use are provided. The biochip scanner device includes a laser for emitting a laser beam. A modulator, such as an optical chopper modulates the laser beam. A scanning head receives the modulated laser beam and a scanning mechanics coupled to the scanning head moves the scanning head relative to the biochip. An optical fiber delivers the modulated laser beam to the scanning head. The scanning head collects the fluorescence light from the biochip, launches it into the same optical fiber, which delivers the fluorescence into a photodetector, such as a photodiode. The biochip scanner device is used in a row scanning method to scan selected rows of the biochip with the laser beam size matching the size of the immobilization site.

Perov, Alexander (Troitsk, RU); Belgovskiy, Alexander I. (Mayfield Heights, OH); Mirzabekov, Andrei D. (Darien, IL)

2001-01-01T23:59:59.000Z

189

Fragment capture device  

DOE Patents [OSTI]

A fragment capture device for use in explosive containment. The device comprises an assembly of at least two rows of bars positioned to eliminate line-of-sight trajectories between the generation point of fragments and a surrounding containment vessel or asset. The device comprises an array of at least two rows of bars, wherein each row is staggered with respect to the adjacent row, and wherein a lateral dimension of each bar and a relative position of each bar in combination provides blockage of a straight-line passage of a solid fragment through the adjacent rows of bars, wherein a generation point of the solid fragment is located within a cavity at least partially enclosed by the array of bars.

Payne, Lloyd R. (Los Lunas, NM); Cole, David L. (Albuquerque, NM)

2010-03-30T23:59:59.000Z

190

Pendulum detector testing device  

DOE Patents [OSTI]

A detector testing device which provides consistent, cost-effective, repeatable results. The testing device is primarily constructed of PVC plastic and other non-metallic materials. Sensitivity of a walk-through detector system can be checked by: 1) providing a standard test object simulating the mass, size and material content of a weapon or other contraband, 2) suspending the test object in successive positions, such as head, waist and ankle levels, simulating where the contraband might be concealed on a person walking through the detector system; and 3) swinging the suspended object through each of the positions, while operating the detector system and observing its response. The test object is retained in a holder in which the orientation of the test device or target can be readily changed, to properly complete the testing requirements.

Gonsalves, John M. (Modesto, CA)

1997-01-01T23:59:59.000Z

191

Electrochromic optical switching device  

DOE Patents [OSTI]

An electrochromic cell is disclosed which comprises an electrochromic layer, a polymerizable organo-sulfur layer which comprises the counter electrode of the structure, and an ionically conductive electronically insulating material which comprises the separator between the electrodes. In a preferred embodiment, both the separator and the organo-sulfur electrode (in both its charged and uncharged states) are transparent either to visible light or to the entire solar spectrum. An electrochromic device is disclosed which comprises such electrodes and separator encased in glass plates on the inner surface of each of which is formed a transparent electrically conductive film in respective electrical contact with the electrodes which facilitates formation of an external electrical connection or contact to the electrodes of the device to permit electrical connection of the device to an external potential source.

Lampert, Carl M. (El Sobrante, CA); Visco, Steven J. (Berkeley, CA)

1992-01-01T23:59:59.000Z

192

Pendulum detector testing device  

DOE Patents [OSTI]

A detector testing device is described which provides consistent, cost-effective, repeatable results. The testing device is primarily constructed of PVC plastic and other non-metallic materials. Sensitivity of a walk-through detector system can be checked by: (1) providing a standard test object simulating the mass, size and material content of a weapon or other contraband, (2) suspending the test object in successive positions, such as head, waist and ankle levels, simulating where the contraband might be concealed on a person walking through the detector system; and (3) swinging the suspended object through each of the positions, while operating the detector system and observing its response. The test object is retained in a holder in which the orientation of the test device or target can be readily changed, to properly complete the testing requirements. 5 figs.

Gonsalves, J.M.

1997-09-30T23:59:59.000Z

193

Nonaqueous Electrical Storage Device  

DOE Patents [OSTI]

An electrochemical capacitor is disclosed that features two, separated, high surface area carbon cloth electrodes sandwiched between two current collectors fabricated of a conductive polymer having a flow temperature greater than 130.degree. C., the perimeter of the electrochemical capacitor being sealed with a high temperature gasket to form a single cell device. The gasket material is a thermoplastic stable at temperatures greater than 100.degree. C., preferably a polyester or a polyurethane, and having a reflow temperature above 130.degree. C. but below the softening temperature of the current collector material. The capacitor packaging has good mechanical integrity over a wide temperature range, contributes little to the device equivalent series resistance (ESR), and is stable at high potentials. In addition, the packaging is designed to be easily manufacturable by assembly line methods. The individual cells can be stacked in parallel or series configuration to reach the desired device voltage and capacitance.

McEwen, Alan B. (Melrose, MA); Evans, David A. (Seekonk, MA); Blakley, Thomas J. (Woburn, MA); Goldman, Jay L. (Mansfield, MA)

1999-10-26T23:59:59.000Z

194

Ion manipulation device  

DOE Patents [OSTI]

An ion manipulation method and device is disclosed. The device includes a pair of substantially parallel surfaces. An array of inner electrodes is contained within, and extends substantially along the length of, each parallel surface. The device includes a first outer array of electrodes and a second outer array of electrodes. Each outer array of electrodes is positioned on either side of the inner electrodes, and is contained within and extends substantially along the length of each parallel surface. A DC voltage is applied to the first and second outer array of electrodes. A RF voltage, with a superimposed electric field, is applied to the inner electrodes by applying the DC voltages to each electrode. Ions either move between the parallel surfaces within an ion confinement area or along paths in the direction of the electric field, or can be trapped in the ion confinement area.

Anderson, Gordon A; Smith, Richard D; Ibrahim, Yehia M; Baker, Erin M

2014-09-16T23:59:59.000Z

195

Regenerative combustion device  

DOE Patents [OSTI]

A regenerative combustion device having a combustion zone, and chemicals contained within the combustion zone, such as water, having a first equilibrium state, and a second combustible state. Means for transforming the chemicals from the first equilibrium state to the second combustible state, such as electrodes, are disposed within the chemicals. An igniter, such as a spark plug or similar device, is disposed within the combustion zone for igniting combustion of the chemicals in the second combustible state. The combustion products are contained within the combustion zone, and the chemicals are selected such that the combustion products naturally chemically revert into the chemicals in the first equilibrium state following combustion. The combustion device may thus be repeatedly reused, requiring only a brief wait after each ignition to allow the regeneration of combustible gasses within the head space.

West, Phillip B.

2004-03-16T23:59:59.000Z

196

Electrochromic optical switching device  

DOE Patents [OSTI]

An electrochromic cell is disclosed which comprises an electrochromic layer, a polymerizable organo-sulfur layer which comprises the counter electrode of the structure, and an ionically conductive electronically insulating material which comprises the separator between the electrodes. In a preferred embodiment, both the separator and the organo-sulfur electrode (in both its charged and uncharged states) are transparent either to visible light or to the entire solar spectrum. An electrochromic device is disclosed which comprises such electrodes and separator encased in glass plates on the inner surface of each of which is formed a transparent electrically conductive film in respective electrical contact with the electrodes which facilitates formation of an external electrical connection or contact to the electrodes of the device to permit electrical connection of the device to an external potential source. 3 figs.

Lampert, C.M.; Visco, S.J.

1992-08-25T23:59:59.000Z

197

Remote Sensing of Soils, Minerals, and Geomorphology  

E-Print Network [OSTI]

,Remote Sensing of Soils, Minerals, and GeomorphologyMinerals, and Geomorphology · Soil is unconsolidated material). ·· SoilSoil is unconsolidated material at the surface of the Earth thatis unconsolidated material

198

Precision alignment device  

DOE Patents [OSTI]

Apparatus for providing automatic alignment of beam devices having an associated structure for directing, collimating, focusing, reflecting, or otherwise modifying the main beam. A reference laser is attached to the structure enclosing the main beam producing apparatus and produces a reference beam substantially parallel to the main beam. Detector modules containing optical switching devices and optical detectors are positioned in the path of the reference beam and are effective to produce an electrical output indicative of the alignment of the main beam. This electrical output drives servomotor operated adjustment screws to adjust the position of elements of the structure associated with the main beam to maintain alignment of the main beam. 5 figs.

Jones, N.E.

1988-03-10T23:59:59.000Z

199

Phononic crystal devices  

DOE Patents [OSTI]

Phononic crystals that have the ability to modify and control the thermal black body phonon distribution and the phonon component of heat transport in a solid. In particular, the thermal conductivity and heat capacity can be modified by altering the phonon density of states in a phononic crystal. The present invention is directed to phononic crystal devices and materials such as radio frequency (RF) tags powered from ambient heat, dielectrics with extremely low thermal conductivity, thermoelectric materials with a higher ratio of electrical-to-thermal conductivity, materials with phononically engineered heat capacity, phononic crystal waveguides that enable accelerated cooling, and a variety of low temperature application devices.

El-Kady, Ihab F. (Albuquerque, NM); Olsson, Roy H. (Albuquerque, NM)

2012-01-10T23:59:59.000Z

200

Radioisotope Power Sources for MEMS Devices,  

SciTech Connect (OSTI)

Microelectromechanical systems (MEMS) comprise a rapidly expanding research field with potential applications varying from sensors in airbags to more recent optical applications. Depending on the application, these devices often require an on-board power source for remote operation, especially in cases requiring operation for an extended period of time. Previously suggested power sources include fossil fuels and solar energy, but nuclear power sources may provide significant advantages for certain applications. Hence, the objective of this study is to establish the viability of using radioisotopes to power realistic MEMS devices. A junction-type battery was constructed using silicon and a {sup 63}Ni liquid source. A source volume containing 64 {micro}Ci provided a power of {approx}0.07 nW. A more novel application of nuclear sources for MEMS applications involves the creation of a resonator that is driven by charge collection in a cantilever beam. Preliminary results have established the feasibility of this concept, and future work will optimize the design for various applications.

Blanchard, J.P.

2001-06-17T23:59:59.000Z

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Earth Minerals Did you read chapter 29  

E-Print Network [OSTI]

1 Chapter 29 Earth Minerals Did you read chapter 29 before coming to class? A. Yes B. No Lets play that begins in Hawaii Other "Hot Spots" around the world The interior structure of Earth has been determined outer core #12;2 What is different on earth (as opposed to other planets)? Continents Why does

Hart, Gus

202

Effect of geotropism on instrument readings  

SciTech Connect (OSTI)

A review of gravity's effect on instrument readings, also referred to as geotropism. In this essay a review of meter movement construction and the effect are reviewed as it applies to portable radiation instruments. Reference to the three ANSI standards and their requirements are reviewed. An alternate approach to test for the effects is offered.

Rolph, James T.

2006-11-01T23:59:59.000Z

203

POLICY NAME 1ST READING BY  

E-Print Network [OSTI]

POLICY NAME 1ST READING BY FACULTY SENATE APPROVED BY FACULTY SENATE POSTED FOR PUBLIC COMMENT APPROVED BY PRES or PROVOST ADOPTED FINAL POLICY DESTINATION Student Pregnancy Leave Pending Regents Professor (Version 1) 01/26/2011 04/27/2011 Regents Professor (Version 2) 04/12/2012 Revised Policy

Maxwell, Bruce D.

204

Fiber optically isolated and remotely stabilized data transmission system  

DOE Patents [OSTI]

A fiber optically isolated and remotely stabilized data transmission systems described wherein optical data may be transmitted over an optical data fiber from a remote source which includes a data transmitter and a power supply at the remote source. The transmitter may be remotely calibrated and stabilized via an optical control fiber, and the power source may be remotely cycled between duty and standby modes via an optical control fiber. 3 figs.

Nelson, M.A.

1992-11-10T23:59:59.000Z

205

Retroreflective systems for remote readout  

DOE Patents [OSTI]

A sensing device is described for sensing an environmental factor. The device includes a retroreflective layer disposed in a parallel, facing relationship with a sensing layer. The sensing layer has an initial optical absorption capacity for (1) sensing a presence of an environmental factor, (2) experiencing a change in optical absorption capacity responsive to said environmental factor, and (3) transmitting and attenuating light. A first portion of the sensing layer is sealed off from exposure to the environment while a second portion remains exposed to the environment such that, when the environmental factor is present, the first portion of the sensing layer is prevented from experiencing a change in optical absorption capacity responsive to said environmental factor. Well-collimated light beams are passed through the sensing layer and are reflected back from the retroreflective layer for processing. When the environmental factor is present, the beams which pass through the second portion are attenuated responsive to an increase in optical absorption capacity and are compared with the non-attenuated beams passing through the first portion to calculate the presence and quantity of the environmental factor. 7 figs.

Deason, V.A.; Colwell, F.S.; Ricks, K.L.

1998-10-13T23:59:59.000Z

206

Retroreflective systems for remote readout  

DOE Patents [OSTI]

A sensing device for sensing an environmental factor. The device includes a retroreflective layer disposed in a parallel, facing relationship with a sensing layer. The sensing layer has an initial optical absorption capacity for (i) sensing a presence of an environmental factor, (ii) experiencing a change in optical absorption capacity responsive to said environmental factor, and (iii) transmitting and attenuating light. A first portion of the sensing layer is sealed off from exposure to the environment while a second portion remains exposed to the environment such that, when the environmental factor is present, the first portion of the sensing layer is prevented from experiencing a change in optical absorption capacity responsive to said environmental factor. Well-collimated light beams are passed through the sensing layer and are reflected back from the retroreflective layer for processing. When the environmental factor is present, the beams which pass through the second portion are attenuated responsive to an increase in optical absorption capacity and are compared with the non-attenuated beams passing through the first portion to calculate the presence and quantity of the environmental factor.

Deason, Vance A. (Idaho Falls, ID); Colwell, Frederick S. (Idaho Falls, ID); Ricks, Kirk L. (Idaho Falls, ID)

1998-01-01T23:59:59.000Z

207

Solar Innovator | Alta Devices  

ScienceCinema (OSTI)

Selected to participate in the Energy Department's SunShot Initiative, Alta Devices produces solar cells that convert sunlight into electricity at world record-breaking levels of efficiency. Through its innovative solar technology Alta is helping bring down the cost of solar. Learn more about the Energy Department's efforts to advance solar technology at energy.gov/solar .

Mattos, Laila; Le, Minh

2013-05-29T23:59:59.000Z

208

Device Oriented Project Controller  

SciTech Connect (OSTI)

This proposal is directed at the issue of developing control systems for very large HEP projects. A de-facto standard in accelerator control is the Experimental Physics and Industrial Control System (EPICS), which has been applied successfully to many physics projects. EPICS is a channel based system that requires that each channel of each device be configured and controlled. In Phase I, the feasibility of a device oriented extension to the distributed channel database was demonstrated by prototyping a device aware version of an EPICS I/O controller that functions with the current version of the channel access communication protocol. Extensions have been made to the grammar to define the database. Only a multi-stage position controller with limit switches was developed in the demonstration, but the grammar should support a full range of functional record types. In phase II, a full set of record types will be developed to support all existing record types, a set of process control functions for closed loop control, and support for experimental beam line control. A tool to configure these records will be developed. A communication protocol will be developed or extensions will be made to Channel Access to support introspection of components of a device. Performance bench marks will be made on both communication protocol and the database. After these records and performance tests are under way, a second of the grammar will be undertaken.

Dalesio, Leo; Kraimer, Martin

2013-11-20T23:59:59.000Z

209

Multiple gap photovoltaic device  

DOE Patents [OSTI]

A multiple gap photovoltaic device having a transparent electrical contact adjacent a first cell which in turn is adjacent a second cell on an opaque electrical contact, includes utilizing an amorphous semiconductor as the first cell and a crystalline semiconductor as the second cell.

Dalal, Vikram L. (Newark, DE)

1981-01-01T23:59:59.000Z

210

Microuidic device reads up to four consecutive base pairs in DNA sequencing-by-synthesis  

E-Print Network [OSTI]

connected through tygon tubing (Cole-Parmer, Vernon Hills, IL) to Lee-valve arrays (Fluidigm Corp., South

Quake, Stephen R.

211

Release of DRAFT RFP Headquarters Reading Room Instructions/Guidelines  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Release of DRAFT RFP Headquarters Reading Room InstructionsGuidelines 1. Reading Room Points of Contact: 721 - 88, Mike Baehre, (202) 586-6575 89 - Close of Draft RFP, John...

212

Reading Abilities: Importance of Visual-Spatial Attention  

E-Print Network [OSTI]

Children with dyslexia may read poorly for several reasons. Recent research suggests that in addition to skills with language sounds, visual-spatial attention may be an important predictor of reading abilities.

Gabrieli, JohnD.E.

213

?-RA: a parallel sparse index for genomic read alignment  

E-Print Network [OSTI]

Background Genomic read alignment involves mapping (exactly or approximately) short reads from a particular individual onto a pre-sequenced reference genome of the same species. Because all individuals of the same species ...

Kü lekci, M O?uzhan; Hon, Wing-Kai; Shah, Rahul; Vitter, Jeffrey Scott; Xu, Bojian

2011-07-27T23:59:59.000Z

214

The Evaluation and Use of Extensive Reading Materials  

E-Print Network [OSTI]

The current investigation is based on the topic of The evaluation and use of extensive reading materials. Throughout this research, I attempted to find out whether a theory-based exploration on the evaluation and use of extensive reading...

Tignanelli, Rosana

2007-06-29T23:59:59.000Z

215

2007 Urban Remote Sensing Joint Event Application of satellite Remote Sensing for Urban  

E-Print Network [OSTI]

2007 Urban Remote Sensing Joint Event Application of satellite Remote Sensing for Urban Risk Analysis: a case study of the 2003 extreme heat wave in Paris Bénédicte Dousset Hawaii Institute@ogs.trieste.it Abstract ­ Satellite observations are used to monitor the August 2003 heat wave in Paris

Paris-Sud XI, Université de

216

Packaging of solid state devices  

DOE Patents [OSTI]

A package for one or more solid state devices in a single module that allows for operation at high voltage, high current, or both high voltage and high current. Low thermal resistance between the solid state devices and an exterior of the package and matched coefficient of thermal expansion between the solid state devices and the materials used in packaging enables high power operation. The solid state devices are soldered between two layers of ceramic with metal traces that interconnect the devices and external contacts. This approach provides a simple method for assembling and encapsulating high power solid state devices.

Glidden, Steven C.; Sanders, Howard D.

2006-01-03T23:59:59.000Z

217

Non- contacting capacitive diagnostic device  

DOE Patents [OSTI]

A non-contacting capacitive diagnostic device includes a pulsed light source for producing an electric field in a semiconductor or photovoltaic device or material to be evaluated and a circuit responsive to the electric field. The circuit is not in physical contact with the device or material being evaluated and produces an electrical signal characteristic of the electric field produced in the device or material. The diagnostic device permits quality control and evaluation of semiconductor or photovoltaic device properties in continuous manufacturing processes.

Ellison, Timothy

2005-07-12T23:59:59.000Z

218

Light modulating device  

DOE Patents [OSTI]

In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity.

Rauh, R. David (Newton, MA); Goldner, Ronald B. (Lexington, MA)

1989-01-01T23:59:59.000Z

219

Light modulating device  

DOE Patents [OSTI]

In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity are disclosed. 1 fig.

Rauh, R.D.; Goldner, R.B.

1989-12-26T23:59:59.000Z

220

Nuclear reactor safety device  

DOE Patents [OSTI]

A safety device is disclosed for use in a nuclear reactor for axially repositioning a control rod with respect to the reactor core in the event of an upward thermal excursion. Such safety device comprises a laminated helical ribbon configured as a tube-like helical coil having contiguous helical turns with slidably abutting edges. The helical coil is disclosed as a portion of a drive member connected axially to the control rod. The laminated ribbon is formed of outer and inner laminae. The material of the outer lamina has a greater thermal coefficient of expansion than the material of the inner lamina. In the event of an upward thermal excursion, the laminated helical coil curls inwardly to a smaller diameter. Such inward curling causes the total length of the helical coil to increase by a substantial increment, so that the control rod is axially repositioned by a corresponding amount to reduce the power output of the reactor.

Hutter, Ernest (Wilmette, IL)

1986-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Dielectrokinetic chromatography devices  

DOE Patents [OSTI]

Disclosed herein are methods and devices for dielectrokinetic chromatography. As disclosed, the devices comprise microchannels having at least one perturber which produces a non-uniformity in a field spanning the width of the microchannel. The interaction of the field non-uniformity with a perturber produces a secondary flow which competes with a primary flow. By decreasing the size of the perturber the secondary flow becomes significant for particles/analytes in the nanometer-size range. Depending on the nature of a particle/analyte present in the fluid and its interaction with the primary flow and the secondary flow, the analyte may be retained or redirected. The composition of the primary flow can be varied to affect the magnitude of primary and/or secondary flows on the particles/analytes and thereby separate and concentrate it from other particles/analytes.

Chirica, Gabriela S; Fiechtner, Gregory J; Singh, Anup K

2014-12-16T23:59:59.000Z

222

Regenerative braking device  

DOE Patents [OSTI]

Disclosed are several embodiments of a regenerative braking device for an automotive vehicle. The device includes a plurality of rubber rollers (24, 26) mounted for rotation between an input shaft (14) connectable to the vehicle drivetrain and an output shaft (16) which is drivingly connected to the input shaft by a variable ratio transmission (20). When the transmission ratio is such that the input shaft rotates faster than the output shaft, the rubber rollers are torsionally stressed to accumulate energy, thereby slowing the vehicle. When the transmission ratio is such that the output shaft rotates faster than the input shaft, the rubber rollers are torsionally relaxed to deliver accumulated energy, thereby accelerating or driving the vehicle.

Hoppie, Lyle O. (Birmingham, MI)

1982-01-12T23:59:59.000Z

223

Support and maneuvering device  

DOE Patents [OSTI]

A support and maneuvering device includes an elongated flexible inflatable enclosure having a fixed end and a movable end. The movable end is collapsible toward the fixed end to a contracted position when the enclosure is in a noninflated condition. Upon inflation, the movable end is movable away from the fixed end to an extended position. The movable end includes means for mounting an article such as a solar reflector thereon. The device also includes a plurality of position controlling means disposed about the movable end to effect adjusting movement of portions thereof by predetermined amounts and for controlling an angle at which the article disposed at the movable end is oriented. The plurality of position controlling means limits a suitable number degrees of freedom of the movable end for transmitting a steering motion thereto and for controlling the position thereof. 9 figs.

Wood, R.L.

1987-03-23T23:59:59.000Z

224

Microelectromechanical safe arm device  

DOE Patents [OSTI]

Microelectromechanical (MEM) apparatus and methods for operating, for preventing unintentional detonation of energetic components comprising pyrotechnic and explosive materials, such as air bag deployment systems, munitions and pyrotechnics. The MEM apparatus comprises an interrupting member that can be moved to block (interrupt) or complete (uninterrupt) an explosive train that is part of an energetic component. One or more latching members are provided that engage and prevent the movement of the interrupting member, until the one or more latching members are disengaged from the interrupting member. The MEM apparatus can be utilized as a safe and arm device (SAD) and electronic safe and arm device (ESAD) in preventing unintentional detonations. Methods for operating the MEM apparatus include independently applying drive signals to the actuators coupled to the latching members, and an actuator coupled to the interrupting member.

Roesler, Alexander W. (Tijeras, NM)

2012-06-05T23:59:59.000Z

225

Wire brush fastening device  

DOE Patents [OSTI]

A fastening device is provided which is a variation on the conventional nut and bolt. The bolt has a longitudinal axis and threading helically affixed thereon along the longitudinal axis. A nut having a bore extending therethrough is provided. The bore of the nut has a greater diameter than the diameter of the bolt so the bolt can extend through the bore. An array of wire bristles are affixed within the bore so as to form a brush. The wire bristles extend inwardly from the bore and are constructed and arranged of the correct size, length and stiffness to guide the bolt within the bore and to restrain the bolt within the bore as required. A variety of applications of the wire brush nut are disclosed, including a bolt capture device and a test rig apparatus. 13 figs.

Meigs, R.A.

1995-09-19T23:59:59.000Z

226

T-606: Sun Java System Access Manager Lets Remote Users Partially...  

Broader source: Energy.gov (indexed) [DOE]

6: Sun Java System Access Manager Lets Remote Users Partially Modify Data and Remote Authenticated Users Partially Access Data T-606: Sun Java System Access Manager Lets Remote...

227

Residual gas analysis device  

DOE Patents [OSTI]

A system is provided for testing the hermeticity of a package, such as a microelectromechanical systems package containing a sealed gas volume, with a sampling device that has the capability to isolate the package and breach the gas seal connected to a pulse valve that can controllably transmit small volumes down to 2 nanoliters to a gas chamber for analysis using gas chromatography/mass spectroscopy diagnostics.

Thornberg, Steven M. (Peralta, NM)

2012-07-31T23:59:59.000Z

228

Biomolecular detection device  

DOE Patents [OSTI]

A device for detecting and measuring the concentration of biomolecules in solution, utilizing a conducting electrode in contact with a solution containing target biomolecules, with a film with controllable pore size distribution characteristics applied to at least one surface of the conducting electrode. The film is functionalized with probe molecules that chemically interact with the target biomolecules at the film surface, blocking indicator molecules present in solution from diffusing from the solution to the electrode, thereby changing the electrochemical response of the electrode.

Huo, Qisheng (Albuquerque, NM); Liu, Jun (Albuquerque, NM)

2008-10-21T23:59:59.000Z

229

Hybrid electroluminescent devices  

DOE Patents [OSTI]

A hybrid electroluminescent (EL) device comprises at least one inorganic diode element and at least one organic EL element that are electrically connected in series. The absolute value of the breakdown voltage of the inorganic diode element is greater than the absolute value of the maximum reverse bias voltage across the series. The inorganic diode element can be a power diode, a Schottky barrier diode, or a light-emitting diode.

Shiang, Joseph John (Niskayuna, NY); Duggal, Anil Raj (Niskayuna, NY); Michael, Joseph Darryl (Schenectady, NY)

2010-08-03T23:59:59.000Z

230

Plasma jet ignition device  

DOE Patents [OSTI]

An ignition device of the plasma jet type is disclosed. The device has a cylindrical cavity formed in insulating material with an electrode at one end. The other end of the cylindrical cavity is closed by a metal plate with a small orifice in the center which plate serves as a second electrode. An arc jumping between the first electrode and the orifice plate causes the formation of a highly-ionized plasma in the cavity which is ejected through the orifice into the engine cylinder area to ignite the main fuel mixture. Two improvements are disclosed to enhance the operation of the device and the length of the plasma plume. One improvement is a metal hydride ring which is inserted in the cavity next to the first electrode. During operation, the high temperature in the cavity and the highly excited nature of the plasma breaks down the metal hydride, liberating hydrogen which acts as an additional fuel to help plasma formation. A second improvement consists of a cavity insert containing a plurality of spaced, metal rings. The rings act as secondary spark gap electrodes reducing the voltage needed to maintain the initial arc in the cavity.

McIlwain, Michael E. (Franklin, MA); Grant, Jonathan F. (Wayland, MA); Golenko, Zsolt (North Reading, MA); Wittstein, Alan D. (Fairfield, CT)

1985-01-15T23:59:59.000Z

231

Thermophotovoltaic energy conversion device  

DOE Patents [OSTI]

A thermophotovoltaic device and a method for making the thermophotovoltaic device are disclosed. The device includes an n-type semiconductor material substrate having top and bottom surfaces, a tunnel junction formed on the top surface of the substrate, a region of active layers formed on top of the tunnel junction and a back surface reflector (BSR). The tunnel junction includes a layer of heavily doped n-type semiconductor material that is formed on the top surface of the substrate and a layer of heavily doped p-type semiconductor material formed on the n-type layer. An optional pseudomorphic layer can be formed between the n-type and p-type layers. A region of active layers is formed on top of the tunnel junction. This region includes a base layer of p-type semiconductor material and an emitter layer of n-type semiconductor material. An optional front surface window layer can be formed on top of the emitter layer. An optional interference filter can be formed on top of the emitter layer or the front surface window layer when it is used. 1 fig.

Charache, G.W.; Baldasaro, P.F.; Egley, J.L.

1998-05-19T23:59:59.000Z

232

Secure Compressed Reading in Smart Grids  

E-Print Network [OSTI]

Smart Grids measure energy usage in real-time and tailor supply and delivery accordingly, in order to improve power transmission and distribution. For the grids to operate effectively, it is critical to collect readings from massively-installed smart meters to control centers in an efficient and secure manner. In this paper, we propose a secure compressed reading scheme to address this critical issue. We observe that our collected real-world meter data express strong temporal correlations, indicating they are sparse in certain domains. We adopt Compressed Sensing technique to exploit this sparsity and design an efficient meter data transmission scheme. Our scheme achieves substantial efficiency offered by compressed sensing, without the need to know beforehand in which domain the meter data are sparse. This is in contrast to traditional compressed-sensing based scheme where such sparse-domain information is required a priori. We then design specific dependable scheme to work with our compressed sensing based ...

Cai, Sheng; Chen, Minghua; Yan, Jianxin; Jaggi, Sidharth

2012-01-01T23:59:59.000Z

233

Reading Enterprise Hub | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to: navigation, search RAPIDColoradosourceRaus PowerLouisiana: Energy ResourcesReXorceReading

234

Literaturlenz: Reading with Authors from Germany, Switzerland, and Austria Reading with Larissa Boehning, Monica Cantieni, and Linda Stift  

E-Print Network [OSTI]

Literaturlenz: Reading with Authors from Germany, Switzerland, and Austria Reading with Larissa.m. Each year Literaturlenz brings authors from Germany, Switzerland, and Austria to the UW Campus. Each Boehning from Germany, Monica Cantieni from Switzerland, and Linda Stift of Austria. The readings

Sheridan, Jennifer

235

Low power reactor for remote applications  

SciTech Connect (OSTI)

A compact, low power reactor is being designed to provide electric power for remote, unattended applications. Because of the high fuel and maintenance costs for conventional power sources such as diesel generators, a reactor power supply appears especially attractive for remote and inaccessible locations. Operating at a thermal power level of 135 kWt, the power supply achieves a gross electrical output of 25 kWe from an organic Rankine cycle (ORC) engine. By intentional selection of design features stressing inherent safety, operation in an unattended mode is possible with minimal risk to the environment. Reliability is achieved through the use of components representing existing, proven technology. Low enrichment uranium particle fuel, in graphite core blocks, cooled by heat pipes coupled to an ORC converter insures long-term, virtually maintenance free, operation of this reactor for remote applications. 10 refs., 7 figs., 3 tabs.

Meier, K.L.; Palmer, R.G.; Kirchner, W.L.

1985-01-01T23:59:59.000Z

236

Thermoelectric Materials, Devices and Systems:  

Broader source: Energy.gov (indexed) [DOE]

-DRAFT - FOR OFFICIAL USE ONLY - DRAFT Thermoelectric Materials, Devices and Systems: 1 Technology Assessment 2 Contents 3 1. Thermoelectric Generation ......

237

Photovoltaic applications for remote-island needs  

SciTech Connect (OSTI)

Electric power supply options available to many of the central and south Pacific island governments are severely constrained by remoteness, limited infrastructures, a corrosive natural environment, and the high delivered costs of many conventional energy sources. Photovoltaic energy systems offer a currently available, practical, and cost-effective source of electricity for many stand-alone applications in remote areas of the Pacific. Photovoltaic system definitions and cost analyses are provided for selected applications in the Republic of Palau, the Federated States of Micronesia, the Republic of the Marshall Islands, and the Territory of American Samoa.

Schaller, D.A.

1983-01-01T23:59:59.000Z

238

Valve assembly having remotely replaceable bearings  

DOE Patents [OSTI]

A valve assembly having remotely replaceable bearings is disclosed wherein a valve disc is supported within a flow duct for rotation about a pair of axially aligned bearings, one of which is carried by a spindle received within a diametral bore in the valve disc, and the other of which is carried by a bearing support block releasably mounted on the duct circumferentially of an annular collar on the valve disc coaxial with its diametrical bore. The spindle and bearing support block are adapted for remote removal to facilitate servicing or replacement of the valve disc support bearings.

Johnson, Evan R. (San Diego, CA); Tanner, David E. (Poway, CA)

1980-01-01T23:59:59.000Z

239

Remote/New sites: Many Field  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298,NIST31 ORV 15051 ModificationRemoteSpectrumRemote/New

240

Improved Thermoelectric Devices: Advanced Semiconductor Materials for Thermoelectric Devices  

SciTech Connect (OSTI)

Broad Funding Opportunity Announcement Project: Phononic Devices is working to recapture waste heat and convert it into usable electric power. To do this, the company is using thermoelectric devices, which are made from advanced semiconductor materials that convert heat into electricity or actively remove heat for refrigeration and cooling purposes. Thermoelectric devices resemble computer chips, and they manage heat by manipulating the direction of electrons at the nanoscale. These devices arent new, but they are currently too inefficient and expensive for widespread use. Phononic Devices is using a high-performance, cost-effective thermoelectric design that will improve the devices efficiency and enable electronics manufacturers to more easily integrate them into their products.

None

2009-12-11T23:59:59.000Z

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Portable Source Identification Device  

SciTech Connect (OSTI)

U.S. Customs and Border Protection (CBP) is the primary enforcement agency protecting the nations ports of entry. CBP is enhancing its capability to interdict the illicit import of nuclear and radiological materials and devices that may be used by terrorists. Pacific Northwest National Laboratory (PNNL) is providing scientific and technical support to CBP in their goal to enable rapid deployment of nuclear and radiation detection systems at U. S. ports of entry to monitor 100% of the incoming international traffic and cargo while not adversely impacting the operations or throughput of the ports. As the deployment of radiation detection systems proceeds, there is a need to adapt the baseline radiation portal monitor (RPM) system technology to operations at these diverse ports of entry. When screening produces an alarm in the primary inspection RPM, the alarming vehicle is removed from the flow of commerce and the alarm is typically confirmed in a secondary inspection RPM. The portable source identification device (PSID) is a radiation sensor panel (RSP), based on thallium-doped sodium iodide (NaI(Tl)) scintillation detector and gamma spectroscopic analysis hardware and software, mounted on a scissor lift on a small truck. The lift supports a box containing a commercial off-the-shelf (COTS) sodium iodide detector that provides real-time isotopic identification, including neutron detectors to interdict Weapons of Mass Destruction (WMD) and radiation dispersion devices (RDD). The scissor lift will lower the detectors to within a foot off the ground and raise them to approximately 24 feet in the air, allowing a wide vertical scanning range.

Andersen, Eric S.; Samuel, Todd J.; Gervais, Kevin L.

2005-08-01T23:59:59.000Z

242

Nanotube resonator devices  

DOE Patents [OSTI]

A fully-functional radio receiver fabricated from a single nanotube is being disclosed. Simultaneously, a single nanotube can perform the functions of all major components of a radio: antenna, tunable band-pass filter, amplifier, and demodulator. A DC voltage source, as supplied by a battery, can power the radio. Using carrier waves in the commercially relevant 40-400 MHz range and both frequency and amplitude modulation techniques, successful music and voice reception has been demonstrated. Also disclosed are a radio transmitter and a mass sensor using a nanotube resonator device.

Jensen, Kenneth J; Zettl, Alexander K; Weldon, Jeffrey A

2014-05-06T23:59:59.000Z

243

Micro environmental sensing device  

DOE Patents [OSTI]

A microelectromechanical (MEM) acceleration switch is disclosed which includes a proof mass flexibly connected to a substrate, with the proof mass being moveable in a direction substantially perpendicular to the substrate in response to a sensed acceleration. An electrode on the proof mass contacts one or more electrodes located below the proof mass to provide a switch closure in response to the sensed acceleration. Electrical latching of the switch in the closed position is possible with an optional latching electrode. The MEM acceleration switch, which has applications for use as an environmental sensing device, can be fabricated using micromachining.

Polosky, Marc A. (Tijeras, NM); Lukens, Laurance L. (Tijeras, NM)

2006-05-02T23:59:59.000Z

244

EAST TEXAS FOREST INVENTORY (ETFI) PILOT PROJECT REMOTE SENSING PHASE  

E-Print Network [OSTI]

EAST TEXAS FOREST INVENTORY (ETFI) PILOT PROJECT REMOTE SENSING PHASE Dr. Daniel R. Unger, Remote) or the United States Forest Service (USFS) via the Southern Forest Inventory and Analysis Program (SFIA

Hung, I-Kuai

245

Remote sensing of terrestrial tropospheric aerosols from aircraft and satellites  

E-Print Network [OSTI]

Remote sensing of terrestrial tropospheric aerosols from aircraft and satellites M I Mishchenko1 instruments suitable for aerosol remote sensing and give examples of aerosol retrievals obtained forcing directly by absorbing and reflecting sunlight, thereby cooling or heating the atmosphere

246

V-029: Mozilla Firefox Multiple Bugs Let Remote Users Execute...  

Broader source: Energy.gov (indexed) [DOE]

remote user can cause the Firefox installer to load a DLL from the default downloads directory and execute arbitrary code. Only Windows-based systems are affected. A remote user...

247

U-047: Siemens Automation License Manager Bugs Let Remote Users...  

Broader source: Energy.gov (indexed) [DOE]

U-048: HP LaserJet Printers Unspecified Flaw Lets Remote Users Update Firmware with Arbitrary Code T-699: EMC AutoStart Buffer Overflows Let Remote Users Execute Arbitrary Code...

248

Remote Sensing for Biodiversity Conservation of the Albertine Rift  

E-Print Network [OSTI]

183 10 Remote Sensing for Biodiversity Conservation of the Albertine Rift in Eastern Africa Samuel of biodiversity conservation is understanding how environmental factors influence species abundance 2003). The rapidly developing field of remote sensing has been invaluable to biodiversity conservation

Wang, Y.Q. "Yeqiao"

249

Geothermal Exploration Using Aviris Remote Sensing Data Over...  

Open Energy Info (EERE)

Aviris Remote Sensing Data Over Fish Lake Valley, Nv Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Geothermal Exploration Using Aviris Remote...

250

Stretchable and foldable electronic devices  

DOE Patents [OSTI]

Disclosed herein are stretchable, foldable and optionally printable, processes for making devices and devices such as semiconductors, electronic circuits and components thereof that are capable of providing good performance when stretched, compressed, flexed or otherwise deformed. Strain isolation layers provide good strain isolation to functional device layers. Multilayer devices are constructed to position a neutral mechanical surface coincident or proximate to a functional layer having a material that is susceptible to strain-induced failure. Neutral mechanical surfaces are positioned by one or more layers having a property that is spatially inhomogeneous, such as by patterning any of the layers of the multilayer device.

Rogers, John A; Huang, Yonggang; Ko, Heung Cho; Stoykovich, Mark; Choi, Won Mook; Song, Jizhou; Ahn, Jong Hyun; Kim, Dae Hyeong

2014-12-09T23:59:59.000Z

251

Stretchable and foldable electronic devices  

DOE Patents [OSTI]

Disclosed herein are stretchable, foldable and optionally printable, processes for making devices and devices such as semiconductors, electronic circuits and components thereof that are capable of providing good performance when stretched, compressed, flexed or otherwise deformed. Strain isolation layers provide good strain isolation to functional device layers. Multilayer devices are constructed to position a neutral mechanical surface coincident or proximate to a functional layer having a material that is susceptible to strain-induced failure. Neutral mechanical surfaces are positioned by one or more layers having a property that is spatially inhomogeneous, such as by patterning any of the layers of the multilayer device.

2013-10-08T23:59:59.000Z

252

Fluid flow monitoring device  

DOE Patents [OSTI]

A flow meter and temperature measuring device are described comprising a tube with a body centered therein for restricting flow and a sleeve at the upper end of the tube to carry several channels formed longitudinally in the sleeve to the appropriate axial location where they penetrate the tube to allow pressure measurements and temperature measurements with thermocouples. The high pressure measurement is made using a channel penetrating the tube away from the body and the low pressure measurement is made at a location at the widest part of the body. An end plug seals the end of the device and holes at its upper end allow fluid to pass from the interior of the tube into a plenum. The channels are made by cutting grooves in the sleeve, the grooves widened at the surface of the sleeve and then a strip of sleeve material is welded to the grooves closing the channels. Preferably the sleeve is packed with powdered graphite before cutting the grooves and welding the strips. 7 figures.

McKay, M.D.; Sweeney, C.E.; Spangler, B.S. Jr.

1993-11-30T23:59:59.000Z

253

Fluid flow monitoring device  

DOE Patents [OSTI]

A flow meter and temperature measuring device comprising a tube with a body centered therein for restricting flow and a sleeve at the upper end of the tube to carry several channels formed longitudinally in the sleeve to the appropriate axial location where they penetrate the tube to allow pressure measurements and temperature measurements with thermocouples. The high pressure measurement is made using a channel penetrating the tube away from the body and the low pressure measurement is made at a location at the widest part of the body. An end plug seals the end of the device and holes at its upper end allow fluid to pass from the interior of the tube into a plenum. The channels are made by cutting grooves in the sleeve, the grooves widened at the surface of the sleeve and then a strip of sleeve material is welded to the grooves closing the channels. Preferably the sleeve is packed with powdered graphite before cutting the grooves and welding the strips.

McKay, Mark D. (1426 Socastee Dr., North Augusta, SC 29841); Sweeney, Chad E. (3600 Westhampton Dr., Martinez, GA 30907-3036); Spangler, Jr., B. Samuel (2715 Margate Dr., Augusta, GA 30909)

1993-01-01T23:59:59.000Z

254

Thermoplastic tape compaction device  

DOE Patents [OSTI]

A device is disclosed for bonding a thermoplastic tape to a substrate to form a fully consolidated composite. This device has an endless chain associated with a frame so as to rotate in a plane that is perpendicular to a long dimension of the tape, the chain having pivotally connected chain links with each of the links carrying a flexible foot member that extends outwardly from the chain. A selected number of the foot members contact the tape, after the heating thereof, to cause the heated tape to bond to the substrate. The foot members are each a thin band of metal oriented transversely to the chain, with a flexibility and width and length to contact the tape so as to cause the tape to conform to the substrate to achieve consolidation of the tape and the substrate. A biased leaf-type spring within the frame bears against an inner surface of the chain to provide the compliant pressure necessary to bond the tape to the substrate. The chain is supported by sprockets on shafts rotatably supported in the frame and, in one embodiment, one of the shafts has a drive unit to produce rotation such that the foot members in contact with the tape move at the same speed as the tape. Cooling jets are positioned along the frame to cool the resultant consolidated composite. 5 figures.

Campbell, V.W.

1994-12-27T23:59:59.000Z

255

Carbon based prosthetic devices  

SciTech Connect (OSTI)

This is the final report of a one-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The project objective was to evaluate the use of carbon/carbon-fiber-reinforced composites for use in endoprosthetic devices. The application of these materials for the metacarpophalangeal (MP) joints of the hand was investigated. Issues concerning mechanical properties, bone fixation, biocompatibility, and wear are discussed. A system consisting of fiber reinforced materials with a pyrolytic carbon matrix and diamond-like, carbon-coated wear surfaces was developed. Processes were developed for the chemical vapor infiltration (CVI) of pyrolytic carbon into porous fiber preforms with the ability to tailor the outer porosity of the device to provide a surface for bone in-growth. A method for coating diamond-like carbon (DLC) on the articulating surface by plasma-assisted chemical vapor deposition (CVD) was developed. Preliminary results on mechanical properties of the composite system are discussed and initial biocompatibility studies were performed.

Devlin, D.J.; Carroll, D.W.; Barbero, R.S.; Archuleta, T. [Los Alamos National Lab., NM (US); Klawitter, J.J.; Ogilvie, W.; Strzepa, P. [Ascension Orthopedics (US); Cook, S.D. [Tulane Univ., New Orleans, LA (US). School of Medicine

1998-12-31T23:59:59.000Z

256

Weakness of two ID-based remote mutual authentication with key agreement protocols for mobile devices  

E-Print Network [OSTI]

to achieve explicit key confirmation. We also point out Wu's scheme decreases efficiency by using the double by the traditional public-key cryptography (Rivest et al., 1978; ElGama, l985). The computation ability and battery the number of users is increased, KAC needs a large storage space to store users' public keys

257

The design and enhancement of a testbed for the remote system monitoring interface device technology  

E-Print Network [OSTI]

Texas A&M University is developing an information technology-based system that is able to continuously monitor and diagnose faults of electrical motors, based solely on electrical signals available at the motor terminals, such as current and voltage...

Turner, Regan Christopher

2013-02-22T23:59:59.000Z

258

T-579: BlackBerry Device Software Bug in WebKit Lets Remote Users Execute  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy Strain Rate4SuperhardSuspectEnginesSystemsForgery AttacksCode |

259

T-579: BlackBerry Device Software Bug in WebKit Lets Remote Users...  

Broader source: Energy.gov (indexed) [DOE]

and in the built-in media storage on the BlackBerry smartphone, but not email and other personal information stored on the file system of the BlackBerry smartphone. The following...

260

U-231: Cisco ASA SIP and WebVPN Bugs Let Remote Users Deny Service  

Broader source: Energy.gov [DOE]

Two vulnerabilities were reported in Cisco ASA. A remote or remote authenticated user can cause denial of service conditions.

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

E-Print Network 3.0 - aerospace remote sensing Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

within aerospace engineering Astrodynamics Remote... dynamics and control Aerodynamics Remote sensing Computational fluid dynamics Systems engineering... to explore the...

262

REFERENCE: Introduction to Remote Sensing. James B.  

E-Print Network [OSTI]

Temperature #12;ACTIVE REMOTE SENSING The sensor illuminates the terrain with its own energy, then records the reflected energy as it has been altered by the earth's surface. #12;SIDE-LOOKING AIRBORNE RADAR SLAR #12 JUAN VENICE #12;EARTH TOPOGRAPHY USING MULTISPECTRAL SCANNERS MT. PINATUBO MT. EVEREST #12;APPLICATIONS

Gilbes, Fernando

263

A Modular Control System for Remote Subsea Eric Stephen Smith  

E-Print Network [OSTI]

A Modular Control System for Remote Subsea Equipment by Eric Stephen Smith Bachelor of Science the undersigned committee hereby approve the attached thesis A Modular Control System for Remote Subsea Equipment and Environmental Systems #12;iv Abstract Title: A Modular Control System for Remote Subsea Equipment Author: Eric

Wood, Stephen L.

264

Young and Older Adults Reading of Distracters  

E-Print Network [OSTI]

. Psychology and Aging, 21, 448-465. Shipley, W. C. (1940). A self-administered scale for measuring intellectual impairment and deterioration. Journal of Psychology, 9, 371-377. Kemper, S., McDowd, J., Metcalf, K., & Liu, C.-J. (2008). Young and older...Kemper, S., McDowd, J., Metcalf, K., & Liu, C.-J. (2008). Young and older adults reading of distracters. Educational Gerontology, 34, 489-502. PM#2396579. Publishers official version: http://dx.doi.org/10.1080/03601270701835858. Open Access...

Kemper, Susan; McDowd, Joan; Metcalf, Kim; Liu, Chiung-Ju

2008-05-01T23:59:59.000Z

265

Dickensian Melodrama: a Reading of the Novels  

E-Print Network [OSTI]

fuzzier than that: in reading Victorian critics of Dickens like George Eliot, James Fitzjames Stephen, R. H. Hutton, Anthony Trollope, and George Gissing, one often finds it difficult to tell precisely what they had in mind in accusing Dickens of being..., the thought of that you propose, should have brought the blushes to your face, and made you dumb with shame;but now, with want at our heartha husband mad with sorrowchildren unprotectednow to offer!oh! you have a heart of stone, or you could ne'er...

Worth, George J.

1978-01-01T23:59:59.000Z

266

Reading the Cosmic Writing on the Wall  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1PrincipalRare | National NuclearReading the

267

DOE-ID FOIA Reading Room  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOffice of ScientificSolar Residence by e2DOE5,Reading

268

Reading the EIS on compact disc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298, andEpidermalOxide Fuel CellsReaction ofReading

269

Fuel vapor control device  

SciTech Connect (OSTI)

A fuel vapor control device is described having a valve opening and closing a passage connecting a carburetor and a charcoal canister according to a predetermined temperature. A first coil spring formed by a ''shape memory effect'' alloy is provided to urge the valve to open the passage when the temperature is high. A second coil spring urges the valve to close the passage. A solenoid is provided to urge an armature against the valve to close the passage against the force of the first coil spring when the engine is running. The solenoid heats the first coil spring to generate a spring force therein when the engine is running. When the engine is turned off, the solenoid is deactivated, and the force of the first spring overcomes the force of the second spring to open the passage until such time as the temperature of the first spring drops below the predetermined temperature.

Ota, I.; Nishimura, Y.; Nishio, S.; Yogo, K.

1987-10-20T23:59:59.000Z

270

Ceramics for fusion devices  

SciTech Connect (OSTI)

Ceramics are required for a number of applications in fusion devices, among the most critical of which are magnetic coil insulators, windows for RF heating systems, and structural uses. Radiation effects dominate consideration of candidate materials, although good pre-irradiation properties are a requisite. Materials and components can be optimized by careful control of chemical and microstructural content, and application of brittle material design and testing techniques. Future directions for research and development should include further extension of the data base in the areas of electrical, structural, and thermal properties; establishment of a fission neutron/fusion neutron correlation including transmutation gas effects; and development of new materials tailored to meet the specific needs of fusion reactors.

Clinard, F.W. Jr.

1984-01-01T23:59:59.000Z

271

False color viewing device  

DOE Patents [OSTI]

This invention consists of a viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching, the user`s eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage.

Kronberg, J.W.

1991-05-08T23:59:59.000Z

272

Tunable surface plasmon devices  

DOE Patents [OSTI]

A tunable extraordinary optical transmission (EOT) device wherein the tunability derives from controlled variation of the dielectric constant of a semiconducting material (semiconductor) in evanescent-field contact with a metallic array of sub-wavelength apertures. The surface plasmon resonance wavelength can be changed by changing the dielectric constant of the dielectric material. In embodiments of this invention, the dielectric material is a semiconducting material. The dielectric constant of the semiconducting material in the metal/semiconductor interfacial region is controllably adjusted by adjusting one or more of the semiconductor plasma frequency, the concentration and effective mass of free carriers, and the background high-frequency dielectric constant in the interfacial region. Thermal heating and/or voltage-gated carrier-concentration changes may be used to variably adjust the value of the semiconductor dielectric constant.

Shaner, Eric A. (Rio Rancho, NM); Wasserman, Daniel (Lowell, MA)

2011-08-30T23:59:59.000Z

273

Light emitting ceramic device  

DOE Patents [OSTI]

A light-emitting ceramic based panel, hereafter termed "electroceramescent" panel, is herein claimed. The electroceramescent panel is formed on a substrate providing mechanical support as well as serving as the base electrode for the device. One or more semiconductive ceramic layers directly overlay the substrate, and electrical conductivity and ionic diffusion are controlled. Light emitting regions overlay the semiconductive ceramic layers, and said regions consist sequentially of a layer of a ceramic insulation layer and an electroluminescent layer, comprised of doped phosphors or the equivalent. One or more conductive top electrode layers having optically transmissive areas overlay the light emitting regions, and a multi-layered top barrier cover comprising one or more optically transmissive non-combustible insulation layers overlay said top electrode regions.

Valentine, Paul; Edwards, Doreen D.; Walker, Jr., William John; Slack, Lyle H.; Brown, Wayne Douglas; Osborne, Cathy; Norton, Michael; Begley, Richard

2010-05-18T23:59:59.000Z

274

Nuclear reactor safety device  

DOE Patents [OSTI]

A safety device is described for use in a nuclear reactor for axially repositioning a control rod with respect to the reactor core in the event of a thermal excursion. It comprises a laminated strip helically configured to form a tube, said tube being in operative relation to said control rod. The laminated strip is formed of at least two materials having different thermal coefficients of expansion, and is helically configured such that the material forming the outer lamina of the tube has a greater thermal coefficient of expansion than the material forming the inner lamina of said tube. In the event of a thermal excursion the laminated strip will tend to curl inwardly so that said tube will increase in length, whereby as said tube increases in length it exerts a force on said control rod to axially reposition said control rod with respect to said core.

Hutter, E.

1983-08-15T23:59:59.000Z

275

Capillary interconnect device  

DOE Patents [OSTI]

A manifold for connecting external capillaries to the inlet and/or outlet ports of a microfluidic device for high pressure applications is provided. The fluid connector for coupling at least one fluid conduit to a corresponding port of a substrate that includes: (i) a manifold comprising one or more channels extending therethrough wherein each channel is at least partially threaded, (ii) one or more threaded ferrules each defining a bore extending therethrough with each ferrule supporting a fluid conduit wherein each ferrule is threaded into a channel of the manifold, (iii) a substrate having one or more ports on its upper surface wherein the substrate is positioned below the manifold so that the one or more ports is aligned with the one or more channels of the manifold, and (iv) means for applying an axial compressive force to the substrate to couple the one or more ports of the substrate to a corresponding proximal end of a fluid conduit.

Renzi, Ronald F. (Tracy, CA)

2007-12-25T23:59:59.000Z

276

False color viewing device  

DOE Patents [OSTI]

A viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching the user's eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage.

Kronberg, James W. (108 Independent Blvd., Aiken, SC 29801)

1992-01-01T23:59:59.000Z

277

False color viewing device  

DOE Patents [OSTI]

A viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching the user's eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage. 7 figs.

Kronberg, J.W.

1992-10-20T23:59:59.000Z

278

Air bag restraint device  

DOE Patents [OSTI]

A rear-seat air bag restraint device is disclosed that prevents an individual, or individuals, from continuing violent actions while being transported in a patrol vehicle`s rear seat without requiring immediate physical contact by the law enforcement officer. The air bag is activated by a control switch in the front seat and inflates to independently restrict the amount of physical activity occurring in the rear seat of the vehicle while allowing the officer to safely stop the vehicle. The air bag can also provide the officer additional time to get backup personnel to aid him if the situation warrants it. The bag is inflated and maintains a constant pressure by an air pump. 8 figs.

Marts, D.J.; Richardson, J.G.

1995-10-17T23:59:59.000Z

279

Topic 2: Backtracking andTopic 2: Backtracking and Recommended ReadingsRecommended Readings  

E-Print Network [OSTI]

Recommended Readings ·· Chapter 3 from Programming in PrologChapter 3 from Programming in Prolog 2 Searching for the AnswerSearching for the Answer ·· Two notions of correctnessTwo notions of correctness ­­ Logical conjunction shouldn't matter ·· In practice, Prolog searches for an answerIn practice, Prolog searches

Stephenson, Ben

280

Training program requirements for remote equipment operators in nuclear facilities  

SciTech Connect (OSTI)

One of the most neglected areas in the engineering development of remotely operated equipment applications in nuclear environments is the planning of adequate training programs for the equipment operators. Remote equipment accidents cannot be prevented solely by engineered safety features on the equipment. As a result of the experiences in using remote equipment in the recovery effort at Three Mile Island Unit 2 (TMI-2), guidelines for the development of remote equipment operator training programs have been generated. The result is that a successful education and training program can create an environment favorable to the safe and effective implementation of a remote equipment program in a nuclear facility.

Palau, G.L.; Auclair, K.D.

1986-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Establishing a Secure Data Center with Remote Access: Preprint  

SciTech Connect (OSTI)

Access to existing travel data is critical for many analysis efforts that lack the time or resources to support detailed data collection. High-resolution data sets provide particular value, but also present a challenge for preserving the anonymity of the original survey participants. To address this dilemma of providing data access while preserving privacy, the National Renewable Energy Laboratory and the U.S. Department of Transportation have launched the Transportation Secure Data Center (TSDC). TSDC data sets include those from regional travel surveys and studies that increasingly use global positioning system devices. Data provided by different collecting agencies varies with respect to formatting, elements included and level of processing conducted in support of the original purpose. The TSDC relies on a number of geospatial and other analysis tools to ensure data quality and to generate useful information outputs. TSDC users can access the processed data in two different ways. The first is by downloading summary results and second-by-second vehicle speed profiles (with latitude/longitude information removed) from a publicly-accessible website. The second method involves applying for a remote connection account to a controlled-access environment where spatial analysis can be conducted, but raw data cannot be removed.

Gonder, J.; Burton, E.; Murakami, E.

2012-04-01T23:59:59.000Z

282

Stability and Turbulence in the Atmospheric Boundary Layer: A Comparison of Remote Sensing and Tower Observations  

SciTech Connect (OSTI)

When monitoring winds and atmospheric stability for wind energy applications, remote sensing instruments present some advantages to in-situ instrumentation such as larger vertical extent, in some cases easy installation and maintenance, measurements of vertical humidity profiles throughout the boundary layer, and no restrictions on prevailing wind directions. In this study, we compare remote sensing devices, Windcube lidar and microwave radiometer, to meteorological in-situ tower measurements to demonstrate the accuracy of these measurements and to assess the utility of the remote sensing instruments in overcoming tower limitations. We compare temperature and wind observations, as well as calculations of Brunt-Vaisala frequency and Richardson numbers for the instrument deployment period in May-June 2011 at the U.S. Department of Energy National Renewable Energy Laboratory's National Wind Technology Center near Boulder, Colorado. The study reveals that a lidar and radiometer measure wind and temperature with the same accuracy as tower instruments, while also providing advantages for monitoring stability and turbulence. We demonstrate that the atmospheric stability is determined more accurately when the liquid-water mixing ratio derived from the vertical humidity profile is considered under moist-adiabatic conditions.

Friedrich, K.; Lundquist, J. K.; Aitken, M.; Kalina, E. A.; Marshall, R. F.

2012-01-01T23:59:59.000Z

283

accurate short read: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Binocular Disparity in Dyslexic CiteSeer Summary: Children with developmental dyslexia show reading impairment compared to their peers, despite being matched on IQ,...

284

als7 open reading: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Binocular Disparity in Dyslexic CiteSeer Summary: Children with developmental dyslexia show reading impairment compared to their peers, despite being matched on IQ,...

285

Reading Municipal Light Department- Business Lighting Rebate Program  

Broader source: Energy.gov [DOE]

Reading Municipal Light Department (RMLD) offers incentives for non-residential customers to install energy efficient lights and sensors in existing facilities. In addition to rebates for the...

286

Reading Merleau-Ponty: Cognitive science, pathology and transcendental phenomenology.  

E-Print Network [OSTI]

??Master of Philosophy (Dept. of Philosophy)%%%This thesis explores the evolution of the way the Phenomenology of Perception is read for the purpose of determining its (more)

Tauber, Justin

2007-01-01T23:59:59.000Z

287

Microbiopsy/precision cutting devices  

DOE Patents [OSTI]

Devices are disclosed for performing tissue biopsy on a small scale (microbiopsy). By reducing the size of the biopsy tool and removing only a small amount of tissue or other material in a minimally invasive manner, the risks, costs, injury and patient discomfort associated with traditional biopsy procedures can be reduced. By using micromachining and precision machining capabilities, it is possible to fabricate small biopsy/cutting devices from silicon. These devices can be used in one of four ways (1) intravascularly, (2) extravascularly, (3) by vessel puncture, and (4) externally. Additionally, the devices may be used in precision surgical cutting. 6 figs.

Krulevitch, P.A.; Lee, A.P.; Northrup, M.A.; Benett, W.J.

1999-07-27T23:59:59.000Z

288

Microbiopsy/precision cutting devices  

DOE Patents [OSTI]

Devices for performing tissue biopsy on a small scale (microbiopsy). By reducing the size of the biopsy tool and removing only a small amount of tissue or other material in a minimally invasive manner, the risks, costs, injury and patient discomfort associated with traditional biopsy procedures can be reduced. By using micromachining and precision machining capabilities, it is possible to fabricate small biopsy/cutting devices from silicon. These devices can be used in one of four ways 1) intravascularly, 2) extravascularly, 3) by vessel puncture, and 4) externally. Additionally, the devices may be used in precision surgical cutting.

Krulevitch, Peter A. (Pleasanton, CA); Lee, Abraham P. (Walnut Creek, CA); Northrup, M. Allen (Berkeley, CA); Benett, William J. (Livermore, CA)

1999-01-01T23:59:59.000Z

289

Automated control of microfluidics devices.  

E-Print Network [OSTI]

??In order for microfluidics devices to be marketable, they must be inexpensive and easy to use. Two projects were pursued in this study for this (more)

Gerstel, Ian.

2010-01-01T23:59:59.000Z

290

Structured wafer for device processing  

SciTech Connect (OSTI)

A structured wafer that includes through passages is used for device processing. Each of the through passages extends from or along one surface of the structured wafer and forms a pattern on a top surface area of the structured wafer. The top surface of the structured wafer is bonded to a device layer via a release layer. Devices are processed on the device layer, and are released from the structured wafer using etchant. The through passages within the structured wafer allow the etchant to access the release layer to thereby remove the release layer.

Okandan, Murat; Nielson, Gregory N

2014-11-25T23:59:59.000Z

291

Development of a custom monolithic device for data acquisition from a scintillating calorimeter at the superconducting super collider  

SciTech Connect (OSTI)

A clock-driven continuous sequential write/random read data acquisition architecture for a scintillating calorimeter at the SSC is presented. Simplicity of design and operation as well as potentially dead time-less operation are the motivations of this effort. The architecture minimizes the number of fast control signals, thereby reducing pickup from digital control lines by sensitive analog circuits in the front-end device. This architecture also reduces the logic necessary on the front-end device improving reliability and easing design and operation. Operation and design of the front-end device are discussed. 3 refs., 7 figs.

Ekenberg, T.; Dawson, J.W.; Talaga, R.L.; Stevens, A.E.; Haberichter, W.N.

1991-01-01T23:59:59.000Z

292

Self-referencing remote optical probe  

DOE Patents [OSTI]

A probe for remote spectrometric measurements of fluid samples having a hollow probe body with a sliding reflective plug therein and a lens at one end, ports for admitting and expelling the fluid sample and a means for moving the reflector so that reference measurement can be made with the reflector in a first position near the lens and a sample measurement can be made with the reflector away from the lens and the fluid sample between the reflector and the lens. Comparison of the two measurements will yield the composition of the fluid sample. The probe is preferably used for remote measurements and light is carried to and from the probe via fiber optic cables.

O'Rourke, Patrick E. (157 Greenwood Dr., Martinez, GA 30907); Prather, William S. (2419 Dickey Rd., Augusta, GA 30906); Livingston, Ronald R. (137 Breckenridge Dr., N. Augusta, GA)

1991-01-01T23:59:59.000Z

293

Self-referencing remote optical probe  

DOE Patents [OSTI]

A probe is described for remote spectrometric measurements of fluid samples having a hollow probe body with a sliding reflective plug therein and a lens at one end, ports for admitting and expelling the fluid sample and a means for moving the reflector so that reference measurement can be made with the reflector in a first position near the lens and a sample measurement can be made with the reflector away from the lens and the fluid sample between the reflector and the lens. Comparison of the two measurements will yield the composition of the fluid sample. The probe is preferably used for remote measurements and light is carried to and from the probe via fiber optic cables. 3 figures.

O'Rourke, P.E.; Prather, W.S.; Livingston, R.R.

1991-08-13T23:59:59.000Z

294

Techniques for remotely sensing watershed runoff potential  

E-Print Network [OSTI]

Techniques for Remotely Sensing Watershed Runoff Potential. (August 1978) Jerry Don Walker, B. S. , Texas ASM University Directed by: Dr. Bruce J. Blanchard The Soil Conservation Service runoff equation is widely used for predicting the watershed runoff... cases, no outflow occurs through the spillway of an overdes1gned structure. Since evaporation losses are high 1n these areas, the salinity of the water stored in the structure gradually increases with time. With insufficient flow through...

Walker, Jerry Don

1978-01-01T23:59:59.000Z

295

Remote Sensing Techniques | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to: navigation, searchVirginia Blue Ridge And PiedmontReminderville, Ohio: EnergyRemote

296

Remotely deployable aerial inspection using tactile sensors  

SciTech Connect (OSTI)

For structural monitoring applications, the use of remotely deployable Non-Destructive Evaluation (NDE) inspection platforms offer many advantages, including improved accessibility, greater safety and reduced cost, when compared to traditional manual inspection techniques. The use of such platforms, previously reported by researchers at the University Strathclyde facilitates the potential for rapid scanning of large areas and volumes in hazardous locations. A common problem for both manual and remote deployment approaches lies in the intrinsic stand-off and surface coupling issues of typical NDE probes. The associated complications of these requirements are obviously significantly exacerbated when considering aerial based remote inspection and deployment, resulting in simple visual techniques being the preferred sensor payload. Researchers at Bristol Robotics Laboratory have developed biomimetic tactile sensors modelled on the facial whiskers (vibrissae) of animals such as rats and mice, with the latest sensors actively sweeping their tips across the surface in a back and forth motion. The current work reports on the design and performance of an aerial inspection platform and the suitability of tactile whisking sensors to aerial based surface monitoring applications.

MacLeod, C. N.; Cao, J.; Pierce, S. G.; Dobie, G.; Summan, R. [Centre for Ultrasonic Engineering, University of Strathclyde, Glasgow, G1 1XW (United Kingdom); Sullivan, J. C.; Pipe, A. G. [Bristol Robotics Laboratory, University of the West of England, Bristol, BS16 1QY (United Kingdom)

2014-02-18T23:59:59.000Z

297

Mobile Device Policy & Program Considerations  

E-Print Network [OSTI]

Page 1 Mobile Device Policy & Program Considerations To BYOD or not to BYOD (bring to manage the use of mobile devices within their corporate resources. Every business will naturally have different mobility requirements, and developing a policy in the first place, let alone an appropriate policy

Fisher, Kathleen

298

Automatic Mechetronic Wheel Light Device  

DOE Patents [OSTI]

A wheel lighting device for illuminating a wheel of a vehicle to increase safety and enhance aesthetics. The device produces the appearance of a "ring of light" on a vehicle's wheels as the vehicle moves. The "ring of light" can automatically change in color and/or brightness according to a vehicle's speed, acceleration, jerk, selection of transmission gears, and/or engine speed. The device provides auxiliary indicator lights by producing light in conjunction with a vehicle's turn signals, hazard lights, alarm systems, and etc. The device comprises a combination of mechanical and electronic components and can be placed on the outer or inner surface of a wheel or made integral to a wheel or wheel cover. The device can be configured for all vehicle types, and is electrically powered by a vehicle's electrical system and/or battery.

Khan, Mohammed John Fitzgerald (Silver Spring, MD)

2004-09-14T23:59:59.000Z

299

Minnesota Center for Reading ResearchResearchtoPolicyBrief  

E-Print Network [OSTI]

Minnesota Center for Reading ResearchResearchtoPolicyBrief Making Sense of Dyslexia What is Dyslexia? The American Psychiatric Association (2000) defined dyslexia as reading achievement that impairments. The term "dyslexia" is a medical term. Schools do not use the term "dyslexia." Instead, special

Ciocan-Fontanine, Ionut

300

The University of Reading Helen Dacre Evaluating pollution transport in  

E-Print Network [OSTI]

The University of Reading Helen Dacre Evaluating pollution transport in weather prediction models Outline Air pollution forecasting Offline forecasting Online forecasting Aim Overview of ETEX 2 case Conclusions and future work #12;The University of Reading Helen Dacre Offline Air Pollution Forecasting

Dacre, Helen

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Reading Tea Leaves: How Humans Interpret Topic Models  

E-Print Network [OSTI]

Reading Tea Leaves: How Humans Interpret Topic Models Jonathan Chang Jordan Boyd-Graber Sean, Blei Reading Tea Leaves #12;Topic Models in a Nutshell From an input corpus words to topics Forget Red Light, Green Light: A 2-Tone L.E.D. to Simplify Screens Corpus Chang, Boyd-Graber, Wang, Gerrish

Boyd-Graber, Jordan

302

Reading the GL008 Revenue & Expense Activity report  

E-Print Network [OSTI]

Reading the GL008 Revenue & Expense Activity report Cognos FMS111 Reporting 7/23/13 - rb Reading the GL008 ­ job aid NEED HELP? Call 847-491-HELP consultant@northwestern.edu © 2013 Northwestern University Page 1 of 2 The GL008 Revenue and Expense Activity Report displays all transactions affecting

Shull, Kenneth R.

303

Reading the GL005 Summary Budget Status report  

E-Print Network [OSTI]

Reading the GL005 Summary Budget Status report Cognos FMS111 Reporting Reference Reading the GL005 University Page 1 of 2 The GL005 Summary Budget Status Report displays the budget amounts and remaining Project Budget Statement. This report pairs well with the related GL008 Revenue and Expense Activity

Shull, Kenneth R.

304

Read-out electronics for DC squid magnetic measurements  

DOE Patents [OSTI]

Read-out electronics for DC SQUID sensor systems, the read-out electronics incorporating low Johnson noise radio-frequency flux-locked loop circuitry and digital signal processing algorithms in order to improve upon the prior art by a factor of at least ten, thereby alleviating problems caused by magnetic interference when operating DC SQUID sensor systems in magnetically unshielded environments.

Ganther, Jr., Kenneth R. (Olathe, KS); Snapp, Lowell D. (Independence, MO)

2002-01-01T23:59:59.000Z

305

Device for inspecting vessel surfaces  

DOE Patents [OSTI]

A portable, remotely-controlled inspection crawler for use along the walls of tanks, vessels, piping and the like. The crawler can be configured to use a vacuum chamber for supporting itself on the inspected surface by suction or a plurality of magnetic wheels for moving the crawler along the inspected surface. The crawler is adapted to be equipped with an ultrasonic probe for mapping the structural integrity or other characteristics of the surface being inspected. Navigation of the crawler is achieved by triangulation techniques between a signal transmitter on the crawler and a pair of microphones attached to a fixed, remote location, such as the crawler's deployment unit. The necessary communications are established between the crawler and computers external to the inspection environment for position control and storage and/or monitoring of data acquisition.

Appel, D. Keith (Aiken, SC)

1995-01-01T23:59:59.000Z

306

QUANTUM WELLS THERMOELECTRIC DEVICES FOR DIESEL ENGINES  

SciTech Connect (OSTI)

Thermoelectric materials are utilized for power generation in remote locations, on spacecraft used for interplanetary exploration, and in places where waste heat can be recovered.

Ghamaty, Saeid

2000-08-20T23:59:59.000Z

307

Split ring containment attachment device  

DOE Patents [OSTI]

A containment attachment device 10 for operatively connecting a glovebag 200 to plastic sheeting 100 covering hazardous material. The device 10 includes an inner split ring member 20 connected on one end 22 to a middle ring member 30 wherein the free end 21 of the split ring member 20 is inserted through a slit 101 in the plastic sheeting 100 to captively engage a generally circular portion of the plastic sheeting 100. A collar potion 41 having an outer ring portion 42 is provided with fastening means 51 for securing the device 10 together wherein the glovebag 200 is operatively connected to the collar portion 41.

Sammel, Alfred G. (Pittsburgh, PA)

1996-01-01T23:59:59.000Z

308

U-051: Skype Discloses IP Addresses to Remote Users | Department...  

Broader source: Energy.gov (indexed) [DOE]

available at the time of this entry. Addthis Related Articles U-047: Siemens Automation License Manager Bugs Let Remote Users Deny Service or Execute Arbitrary Code U-048:...

309

JLab Guest Lecturer Discusses Hurricane Hunting - By Remote Control...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

boundary layer and will provide invaluable ground truth for satellite and aircraft remote sensor measurements. Analyses from these two UAS tropical cyclone missions will be...

310

Method of determining forest production from remotely sensed forest parameters  

DOE Patents [OSTI]

A method of determining forest production entirely from remotely sensed data in which remotely sensed multispectral scanner (MSS) data on forest 5 composition is combined with remotely sensed radar imaging data on forest stand biophysical parameters to provide a measure of forest production. A high correlation has been found to exist between the remotely sensed radar imaging data and on site measurements of biophysical 10 parameters such as stand height, diameter at breast height, total tree height, mean area per tree, and timber stand volume.

Corey, J.C.; Mackey, H.E. Jr.

1987-08-31T23:59:59.000Z

311

Use Remote Sensing Data (selected visible and infrared spectrums...  

Broader source: Energy.gov (indexed) [DOE]

Use Remote Sensing Data (selected visible and infrared spectrums) to locate high temperature ground anomalies in Colorado. Confirm heat flow potential with on-site surveys to drill...

312

Alternative Carriers For Remote Renewable Energy Sources Using...  

Open Energy Info (EERE)

Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Alternative Carriers For Remote Renewable Energy Sources Using Existing Cng Infrastructure...

313

U-219: Symantec Web Gateway Input Validation Flaws Lets Remote...  

Broader source: Energy.gov (indexed) [DOE]

9: Symantec Web Gateway Input Validation Flaws Lets Remote Users Inject SQL Commands, Execute Arbitrary Commands, and Change User Passwords U-219: Symantec Web Gateway Input...

314

Remote controlled vacuum joint closure mechanism  

DOE Patents [OSTI]

A remotely operable and maintainable vacuum joint closure mechanism for a noncircular aperture is disclosed. The closure mechanism includes an extendible bellows coupled at one end to a noncircular duct and at its other end to a flange assembly having sealed grooves for establishing a high vacuum seal with the abutting surface of a facing flange which includes an aperture forming part of the system to be evacuated. A plurality of generally linear arrangements of pivotally coupled linkages and piston combinations are mounted around the outer surface of the duct and aligned along the length thereof. Each of the piston/linkage assemblies is adapted to engage the flange assembly by means of a respective piston and is further coupled to a remote controlled piston drive shaft to permit each of the linkages positioned on a respective flat outer surface of the duct to simultaneously and uniformly displace a corresponding piston and the flange assembly with which it is in contact along the length of the duct in extending the bellows to provide a high vacuum seal between the movable flange and the facing flange. A plurality of latch mechanisms are also pivotally mounted on the outside of the duct. A first end of each of the latch mechanisms is coupled to a remotely controlled latch control shaft for displacing the latch mechanism about its pivot point. In response to the pivoting displacement of the latch mechanism, a second end thereof is displaced so as to securely engage the facing flange and maintain the high vacuum seal established by the displacement of the flange assembly and extension of the bellows without displacing the entire duct.

Doll, D.W.; Hager, E.R.

1984-02-22T23:59:59.000Z

315

An advanced unmanned vehicle for remote applications  

SciTech Connect (OSTI)

An autonomous mobile robotic capability is critical to developing remote work applications for hazardous environments. A few potential applications include humanitarian demining and ordnance neutralization, extraterrestrial science exploration, and hazardous waste cleanup. The ability of the remote platform to sense and maneuver within its environment is a basic technology requirement which is currently lacking. This enabling technology will open the door for force multiplication and cost effective solutions to remote operations. The ultimate goal of this work is to develop a mobile robotic platform that can identify and avoid local obstacles as it traverses from its current location to a specified destination. This goal directed autonomous navigation scheme uses the Global Positioning System (GPS) to identify the robot`s current coordinates in space and neural network processing of LADAR range images for local obstacle detection and avoidance. The initial year funding provided by this LDRD project has developed a small exterior mobile robotic development platform and a fieldable version of Sandia`s Scannerless Range Imager (SRI) system. The robotic testbed platform is based on the Surveillance And Reconnaissance ground Equipment (SARGE) robotic vehicle design recently developed for the US DoD. Contingent upon follow-on funding, future enhancements will develop neural network processing of the range map data to traverse unstructured exterior terrain while avoiding obstacles. The SRI will provide real-time range images to a neural network for autonomous guidance. Neural network processing of the range map data will allow real-time operation on a Pentium based embedded processor board.

Pletta, J.B.; Sackos, J.

1998-03-01T23:59:59.000Z

316

Remote vacuum compaction of compressible hazardous waste  

DOE Patents [OSTI]

A system for remote vacuum compaction and containment of low-level radioactive or hazardous waste comprising a vacuum source, a sealable first flexible container, and a sealable outer flexible container for receiving one or more first flexible containers. A method for compacting low level radioactive or hazardous waste materials at the point of generation comprising the steps of sealing the waste in a first flexible container, sealing one or more first containers within an outer flexible container, breaching the integrity of the first containers, evacuating the air from the inner and outer containers, and sealing the outer container shut.

Coyne, Martin J. (Pittsburgh, PA); Fiscus, Gregory M. (McMurray, PA); Sammel, Alfred G. (Pittsburgh, PA)

1998-01-01T23:59:59.000Z

317

REMOTE AREA RADIATION MONITORING (RARM) ALTERNATIVES ANALYSIS  

SciTech Connect (OSTI)

The Remote Area Radiation Monitoring (RARM) system will be used to provide real-time radiation monitoring information to the operations personnel during tank retrieval and transfer operations. The primary focus of the system is to detect potential anomalous (waste leaks) or transient radiological conditions. This system will provide mobile, real-time radiological monitoring, data logging, and status at pre-selected strategic points along the waste transfer route during tank retrieval operations. The system will provide early detection and response capabilities for the Retrieval and Closure Operations organization and Radiological Control personnel.

NELSON RL

2008-07-18T23:59:59.000Z

318

Remote vacuum compaction of compressible hazardous waste  

DOE Patents [OSTI]

A system is described for remote vacuum compaction and containment of low-level radioactive or hazardous waste comprising a vacuum source, a sealable first flexible container, and a sealable outer flexible container for receiving one or more first flexible containers. A method for compacting low level radioactive or hazardous waste materials at the point of generation comprising the steps of sealing the waste in a first flexible container, sealing one or more first containers within an outer flexible container, breaching the integrity of the first containers, evacuating the air from the inner and outer containers, and sealing the outer container shut. 8 figs.

Coyne, M.J.; Fiscus, G.M.; Sammel, A.G.

1998-10-06T23:59:59.000Z

319

High aspect ratio, remote controlled pumping assembly  

DOE Patents [OSTI]

A miniature dual syringe-type pump assembly is described which has a high aspect ratio and which is remotely controlled, for use such as in a small diameter penetrometer cone or well packer used in water contamination applications. The pump assembly may be used to supply and remove a reagent to a water contamination sensor, for example, and includes a motor, gearhead and motor encoder assembly for turning a drive screw for an actuator which provides pushing on one syringe and pulling on the other syringe for injecting new reagent and withdrawing used reagent from an associated sensor. 4 figs.

Brown, S.B.; Milanovich, F.P.

1995-11-14T23:59:59.000Z

320

Aerosol Remote Sealing System - Energy Innovation Portal  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout the BuildingInnovation 2011 Simulation StudiesAerosol Remote Sealing

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Optical and optoelectronic fiber devices  

E-Print Network [OSTI]

The ability to integrate materials with disparate electrical, thermal, and optical properties into a single fiber structure enabled the realization of fiber devices with diverse and complex functionalities. Amongst those, ...

Shapira, Ofer, Ph. D. Massachusetts Institute of Technology

2007-01-01T23:59:59.000Z

322

Polymer electronic devices and materials.  

SciTech Connect (OSTI)

Polymer electronic devices and materials have vast potential for future microsystems and could have many advantages over conventional inorganic semiconductor based systems, including ease of manufacturing, cost, weight, flexibility, and the ability to integrate a wide variety of functions on a single platform. Starting materials and substrates are relatively inexpensive and amenable to mass manufacturing methods. This project attempted to plant the seeds for a new core competency in polymer electronics at Sandia National Laboratories. As part of this effort a wide variety of polymer components and devices, ranging from simple resistors to infrared sensitive devices, were fabricated and characterized. Ink jet printing capabilities were established. In addition to promising results on prototype devices the project highlighted the directions where future investments must be made to establish a viable polymer electronics competency.

Schubert, William Kent; Baca, Paul Martin; Dirk, Shawn M.; Anderson, G. Ronald; Wheeler, David Roger

2006-01-01T23:59:59.000Z

323

Personal cooling air filtering device  

DOE Patents [OSTI]

A temperature modification system for modifying the temperature of fluids includes at least one thermally conductive carbon foam element, the carbon foam element having at least one flow channel for the passage of fluids. At least one temperature modification device is provided, the temperature modification device thermally connected to the carbon foam element and adapted to modify the temperature of the carbon foam to modify the temperature of fluids flowing through the flow channels. Thermoelectric and/or thermoionic elements can preferably be used as the temperature modification device. A method for the reversible temperature modification of fluids includes the steps of providing a temperature modification system including at least one thermally conductive carbon foam element having flow channels and at least one temperature modification device, and flowing a fluid through the flow channels.

Klett, James (Knoxville, TN); Conway, Bret (Denver, NC)

2002-08-13T23:59:59.000Z

324

Devices for collecting chemical compounds  

DOE Patents [OSTI]

A device for sampling chemical compounds from fixed surfaces and related methods are disclosed. The device may include a vacuum source, a chamber and a sorbent material. The device may utilize vacuum extraction to volatilize the chemical compounds from a fixed surface so that they may be sorbed by the sorbent material. The sorbent material may then be analyzed using conventional thermal desorption/gas chromatography/mass spectrometry (TD/GC/MS) instrumentation to determine presence of the chemical compounds. The methods may include detecting release and presence of one or more chemical compounds and determining the efficacy of decontamination. The device may be useful in collection and analysis of a variety of chemical compounds, such as residual chemical warfare agents, chemical attribution signatures and toxic industrial chemicals.

Scott, Jill R; Groenewold, Gary S

2013-12-24T23:59:59.000Z

325

Device-transparent personal storage  

E-Print Network [OSTI]

Users increasingly store data collections such as digital photographs on multiple personal devices, each of which typically presents the user with a storage management interface isolated from the contents of all other ...

Strauss, Jacob A. (Jacob Alo), 1979-

2010-01-01T23:59:59.000Z

326

Securing Remote Desktop for Windows XP http://www.mobydisk.com/./techres/securing_remote_desktop.html  

E-Print Network [OSTI]

an account lockout policy #12;There are already tools that will use brute-force to guess passwords and log-on remotely. You cannot stop this, but it can be minimized by setting an account lockout policy. If someone system. From the same Local Security Policy screen from before, go to Account Policies - Account Lockout

Major, Arkady

327

ImageCat, Inc. Remote Sensing for PostRemote Sensing for Post--disasterdisaster  

E-Print Network [OSTI]

to Salt Lake City SAR simulation The way forward #12;ImageCat, Inc. The IdeaThe Idea Remote sensing and non-damaged structures #12;ImageCat, Inc. Application to Salt Lake CityApplication to Salt Lake City 0 AssessmentBridge Damage Assessment Beverley J. Adams Ph.D. Charles K. Huyck Sungbin Cho Ronald T. Eguchi

Shinozuka, Masanobu

328

Piezo-phototronic effect devices  

DOE Patents [OSTI]

A semiconducting device includes a piezoelectric structure that has a first end and an opposite second end. A first conductor is in electrical communication with the first end and a second conductor is in electrical communication with the second end so as to form an interface therebetween. A force applying structure is configured to maintain an amount of strain in the piezoelectric member sufficient to generate a desired electrical characteristic in the semiconducting device.

Wang, Zhong L.; Yang, Qing

2013-09-10T23:59:59.000Z

329

Lih thermal energy storage device  

DOE Patents [OSTI]

A thermal energy storage device for use in a pulsed power supply to store waste heat produced in a high-power burst operation utilizes lithium hydride as the phase change thermal energy storage material. The device includes an outer container encapsulating the lithium hydride and an inner container supporting a hydrogen sorbing sponge material such as activated carbon. The inner container is in communication with the interior of the outer container to receive hydrogen dissociated from the lithium hydride at elevated temperatures.

Olszewski, Mitchell (Knoxville, TN); Morris, David G. (Knoxville, TN)

1994-01-01T23:59:59.000Z

330

Wireless device monitoring methods, wireless device monitoring systems, and articles of manufacture  

DOE Patents [OSTI]

Wireless device monitoring methods, wireless device monitoring systems, and articles of manufacture are described. According to one embodiment, a wireless device monitoring method includes accessing device configuration information of a wireless device present at a secure area, wherein the device configuration information comprises information regarding a configuration of the wireless device, accessing stored information corresponding to the wireless device, wherein the stored information comprises information regarding the configuration of the wireless device, comparing the device configuration information with the stored information, and indicating the wireless device as one of authorized and unauthorized for presence at the secure area using the comparing.

McCown, Steven H. (Rigby, ID); Derr, Kurt W. (Idaho Falls, ID); Rohde, Kenneth W. (Idaho Falls, ID)

2012-05-08T23:59:59.000Z

331

"Develop enabling optoelectronic devices for broadband  

E-Print Network [OSTI]

"Develop enabling optoelectronic devices for broadband communications and photonic systems Group Our group focuses on optoelectronic devices and photonic integrated circuits to photodiodes with the highest linearity and output power to date. High-Speed Optoelectronic Devices Driven

Acton, Scott

332

SLAC All Access: Vacuum Microwave Device Department  

ScienceCinema (OSTI)

The Vacuum Microwave Device Department (VMDD) builds the devices that make SLAC's particle accelerators go. These devices, called klystrons, generate intense waves of microwave energy that rocket subatomic particles up to nearly the speed of light.

Haase, Andy

2014-06-13T23:59:59.000Z

333

MDCF Tutorial Device Interface and App Development  

E-Print Network [OSTI]

-generated Device Interface (ICE Device Model) Vision: IDE for Driver Development & Validation Vision: IntegratedMDCF Tutorial Device Interface and App Development Acknowledgements: Funding provided by US National Science Foundation awards 0734204, 0930647 Clinical documentation and hardware provided by CIMIT

Huth, Michael

334

Effects of Orthographic Depth on Literacy Performance: Reading Comprehension Difficulties Across Languages  

E-Print Network [OSTI]

Specific reading disability (dyslexia): What have we learnedThe nature and causes of dyslexia in different languages. Inreading deficit in developmental dyslexia: A review. Reading

McClung, Nicola Ann

2012-01-01T23:59:59.000Z

335

Remote control for anode-cathode adjustment  

DOE Patents [OSTI]

An apparatus for remotely adjusting the anode-cathode gap in a pulse power machine has an electric motor located within a hollow cathode inside the vacuum chamber of the pulse power machine. Input information for controlling the motor for adjusting the anode-cathode gap is fed into the apparatus using optical waveguides. The motor, controlled by the input information, drives a worm gear that moves a cathode tip. When the motor drives in one rotational direction, the cathode is moved toward the anode and the size of the anode-cathode gap is diminished. When the motor drives in the other direction, the cathode is moved away from the anode and the size of the anode-cathode gap is increased. The motor is powered by batteries housed in the hollow cathode. The batteries may be rechargeable, and they may be recharged by a photovoltaic cell in combination with an optical waveguide that receives recharging energy from outside the hollow cathode. Alternatively, the anode-cathode gap can be remotely adjusted by a manually-turned handle connected to mechanical linkage which is connected to a jack assembly. The jack assembly converts rotational motion of the handle and mechanical linkage to linear motion of the cathode moving toward or away from the anode.

Roose, Lars D. (Albuquerque, NM)

1991-01-01T23:59:59.000Z

336

DISSERTATION DEVICE CHARACTERIZATION OF CADMIUM TELLURIDE PHOTOVOLTAICS  

E-Print Network [OSTI]

DISSERTATION DEVICE CHARACTERIZATION OF CADMIUM TELLURIDE PHOTOVOLTAICS Submitted by Russell M Reserved #12;ABSTRACT DEVICE CHARACTERIZATION OF CADMIUM TELLURIDE PHOTOVOLTAICS Thin-film photovoltaics

Sites, James R.

337

Magnetically vectored nanocapsules for tumor penetration and remotely switchable on-demand drug release  

E-Print Network [OSTI]

a demonstration of remote heating as a function of applied55 Figure 27. Remote magnetic field heating of fluid (water)Figure 27. Remote magnetic field heating of fluid (water)

Kong, Seong Deok

2010-01-01T23:59:59.000Z

338

Analysis of Remote Diagnosis Architecture for a PLCBbased Automated Assembly System  

E-Print Network [OSTI]

: remote diagnosis architecture, nature of failure, skill level of the local operator and level of expertise of the remote troubleshooter. For this purpose, three hierarchical levels of remote diagnosis architectures to diagnose failures in a PLC based...

Sekar, Ramnath

2011-10-21T23:59:59.000Z

339

U-184: Mozilla Firefox Multiple Bugs Let Remote Users Execute Arbitrary Code  

Broader source: Energy.gov [DOE]

A remote user can cause arbitrary code to be executed on the target user's system. A remote user can conduct cross-site scripting attacks. A remote user can obtain potentially sensitive information.

340

Remote measurement of turbidity and chlorophyll through aerial photography  

E-Print Network [OSTI]

Readings Along Transects . . 55-59 A-1 A-2 A-3 A-5 A-6 'A- 7 A-8 A-9 A-10 Analysis of Variance for Film Density Readings Along Transect Line T-test Values for Transect Readings Film Density Readings for Repetitive Flights Airphoto Data, May 3... Data, July 4, 19 73 70-74 76 79-80 94 95 96 97 98 99 100 101 102 Table ~Pa e A-11 A-12 A-13 A-14 A-15 B-1 B-2 C-1 C-2 C-3 Airphoto Data, July 5, 1973 Airphoto Data, July 11, 1973 Airphoto Data, July 12, 1973 Airphoto Data...

Schwebel, Martin David

1973-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Semiconductor-based, large-area, flexible, electronic devices  

SciTech Connect (OSTI)

Novel articles and methods to fabricate the same resulting in flexible, large-area, triaxially textured, single-crystal or single-crystal-like, semiconductor-based, electronic devices are disclosed. Potential applications of resulting articles are in areas of photovoltaic devices, flat-panel displays, thermophotovoltaic devices, ferroelectric devices, light emitting diode devices, computer hard disc drive devices, magnetoresistance based devices, photoluminescence based devices, non-volatile memory devices, dielectric devices, thermoelectric devices and quantum dot laser devices.

Goyal, Amit (Knoxville, TN)

2011-03-15T23:59:59.000Z

342

Reading Municipal Light Department- Business Energy Efficiency Rebate Program  

Broader source: Energy.gov [DOE]

Reading Municipal Light Department (RMLD) offers energy efficiency incentives to eligible commercial and industrial customers. Rebates of up to $50,000 are available to customers who wish to reduce...

343

Does "reading" develop "phonological awareness" in Down's syndrome?  

E-Print Network [OSTI]

casual relationship for alphabetic scripts. Results discussed in this paper do not support this view as far as reading ability and phonological awareness go in Down's syndrome. The present study compared a sample of children with Down's syndrome (N=10...

Mishra, Ramesh Kumar

2007-01-01T23:59:59.000Z

344

21W.755 Writing and Reading Short Stories, Fall 2006  

E-Print Network [OSTI]

This class will focus on the craft of the short story, which we will explore through reading great short stories, writers speaking about writing, writing exercises and conducting workshops on original stories.

Lewitt, Shariann

345

HEART SMART NUTRITION Heart Smart Shopping & Label Reading  

E-Print Network [OSTI]

Lesson 3 HEART SMART NUTRITION Heart Smart Shopping & Label Reading What's the first step in fat. Your goal is to eat a diet lower in saturated fat, trans fat, and cholesterol. The National Heart

346

Andrew Mahlstadt Literature and the Mountains recommended reading  

E-Print Network [OSTI]

Andrew Mahlstadt Literature and the Mountains ­ recommended reading Critical works on mountains", in The Adventures of Ghanada (Premendra Mitra) A River Runs through it (Norman Maclean) "Brokeback Mountain" (Annie

Wisconsin at Madison, University of

347

Reading Municipal Light Department- Residential Renewable Energy Rebates  

Broader source: Energy.gov [DOE]

Reading Municipal Light Department (RMLD) offers rebates of $1.00/watt for solar photovoltaic and small wind installations for residential customers. A $0.25/watt adder is available for using local...

348

Learning Hierarchical Plans by Reading Simple English Dustin Smith  

E-Print Network [OSTI]

Learning Hierarchical Plans by Reading Simple English Narratives Dustin Smith MIT Media Lab Cambridge, MA USA dsmit@mit.edu Kenneth Arnold MIT Media Lab Cambridge, MA USA kcarnold@mit.edu ABSTRACT We

Herr, Hugh

349

Reading Municipal Light Department- Residential ENERGY STAR Appliance Rebate Program  

Broader source: Energy.gov [DOE]

Reading Municipal Light Department (RMLD) offers rebates to residential customers who install Energy Star appliances in eligible homes. The offer is limited to one rebate per appliance or a maximum...

350

Real-time Remote Sensing of Snowmobiles Emissions at  

E-Print Network [OSTI]

Real-time Remote Sensing of Snowmobiles Emissions at Yellowstone National Park: An Oxygenated Fuel 68509 #12;Real-time Remote Sensing of Snowmobile Emissions at Yellowstone National Park 2 Executive emissions from snowmobiles. Ratios of CO, HC and toluene to CO2 were measured and used to calculate %CO, %HC

Denver, University of

351

Mobile and remote inertial sensing with atom interferometers  

E-Print Network [OSTI]

Mobile and remote inertial sensing with atom interferometers B. Barrett, P.-A. Gominet, E. Cantin for equivalence principle tests. We also discuss fu- ture applications of this technology, such as remote sensing on laser-cooling and trapping neutral atoms [6, 7, 8, 9, 10] which eventually led to two nobel prizes

Boyer, Edmond

352

Conceptual design analyses for Hanford Site deployable remote spectroscopy systems  

SciTech Connect (OSTI)

This document identifies potential remote, NIR spectroscopic waste surface moisture monitoring system design alternatives to be operated inside one of the Hanford Site, high level, nuclear waste storage tanks. Potential tank waste moisture data impacts from the remote NIR signal transfer through high humidity vapor space is evaluated.

Philipp, B.L.; Reich, F.R.

1994-09-01T23:59:59.000Z

353

Virtual Remote Center of Motion Control for Needle Placement Robots  

E-Print Network [OSTI]

mechanical design but also the need for calibration and registration of the robot to the medical imager priorVirtual Remote Center of Motion Control for Needle Placement Robots Emad M. Boctor, Robert J@jhu.edu, GaborF@jhu.edu http://cisstweb.cs.jhu.edu Abstract. Surgical robots, including those with remote center

Boyer, Edmond

354

TECHNICAL PAPER Multispecies remote sensing measurements of vehicle emissions  

E-Print Network [OSTI]

measurements. The remote sensing mean gram per kilogram carbon monoxide (CO), hydrocarbon (HC), and oxideTECHNICAL PAPER Multispecies remote sensing measurements of vehicle emissions on Sherman Way in Van Department of Chemistry and Biochemistry, University of Denver, Denver, CO, USA 2 National Renewable Energy

Denver, University of

355

Remote estimation of carbon dioxide uptake by a Mediterranean forest  

E-Print Network [OSTI]

to assessing the global carbon budget in a context of climate change (Ciais et al., 2005; Boisvenue & RunningRemote estimation of carbon dioxide uptake by a Mediterranean forest M A R T I´ N F. G A R B U L of the ecology of global change. Current remote sensing methodologies for estimating gross primary productivity

Garbulsky, Martín

356

Remote multi-color excitation using femtosecond propagating surface  

E-Print Network [OSTI]

Remote multi-color excitation using femtosecond propagating surface plasmon polaritons in gold away from a micrometer sized focused laser spot. We attribute the observed remote nonlinear signal of unwanted heating effects at the target site and represents an attractive approach for surface

Potma, Eric Olaf

357

Cloud vertical distribution from radiosonde, remote sensing, and model simulations  

E-Print Network [OSTI]

Cloud vertical distribution from radiosonde, remote sensing, and model simulations Jinqiang Zhang's radiation budget and atmospheric adiabatic heating. Yet it is among the most difficult quantities to observe Great Plains and along with ground- based and space-borne remote sensing products, use it to evaluate

Li, Zhanqing

358

Ris-R-1336(EN) Fundamentals for Remote Structural  

E-Print Network [OSTI]

Ris-R-1336(EN) Fundamentals for Remote Structural Health Monitoring of Wind Turbine Blades) Fundamentals for Remote Structural Health Monitoring of Wind Turbine Blades - a Preproject Bent F. Srensen for the sensors capability to detect the most important damage types in wind turbine blades. Three different

359

Ris-R-1340(EN) Fundamentals for Remote Structural  

E-Print Network [OSTI]

Ris-R-1340(EN) Fundamentals for Remote Structural Health Monitoring of Wind Turbine Blades a Preproject Annex A Cost-Benefit for Embedded Sensors in Large Wind Turbine Blades Lars Gottlieb Hansen for Remote Structural Health Monitoring of Wind Turbine Blades - a Preproject Annex A - Cost

360

Aerosol can waste disposal device  

DOE Patents [OSTI]

Disclosed is a device for removing gases and liquid from containers. The device punctures the bottom of a container for purposes of exhausting gases and liquid from the container without their escaping into the atmosphere. The device includes an inner cup or cylinder having a top portion with an open end for receiving a container and a bottom portion which may be fastened to a disposal or waste container in a substantially leak-proof manner. A piercing device is mounted in the lower portion of the inner cylinder for puncturing the can bottom placed in the inner cylinder. An outer cylinder having an open end and a closed end fits over the top portion of the inner cylinder in telescoping engagement. A force exerted on the closed end of the outer cylinder urges the bottom of a can in the inner cylinder into engagement with the piercing device in the bottom of the inner cylinder to form an opening in the can bottom, thereby permitting the contents of the can to enter the disposal container. 7 figures.

O'Brien, M.D.; Klapperick, R.L.; Bell, C.

1993-12-21T23:59:59.000Z

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Radiation-tolerant imaging device  

DOE Patents [OSTI]

A barrier at a uniform depth for an entire wafer is used to produce imaging devices less susceptible to noise pulses produced by the passage of ionizing radiation. The barrier prevents charge created in the bulk silicon of a CCD detector or a semiconductor logic or memory device from entering the collection volume of each pixel in the imaging device. The charge barrier is a physical barrier, a potential barrier, or a combination of both. The physical barrier is formed by an SiO{sub 2} insulator. The potential barrier is formed by increasing the concentration of majority carriers (holes) to combine with the electron`s generated by the ionizing radiation. A manufacturer of CCD imaging devices can produce radiation-tolerant devices by merely changing the wafer type fed into his process stream from a standard wafer to one possessing a barrier beneath its surface, thus introducing a very small added cost to his production cost. An effective barrier type is an SiO{sub 2} layer. 7 figs.

Colella, N.J.; Kimbrough, J.R.

1996-11-19T23:59:59.000Z

362

U-163: PHP Command Parameter Bug Lets Remote Users Obtain Potentially...  

Broader source: Energy.gov (indexed) [DOE]

63: PHP Command Parameter Bug Lets Remote Users Obtain Potentially Sensitive Information and Execute Arbitrary Code U-163: PHP Command Parameter Bug Lets Remote Users Obtain...

363

E-Print Network 3.0 - adaptive remote-sensing techniques Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 3 4 5 > >> 1 10 January 2009 PHOTOGRAMMETRIC ENGINEERING & REMOTE SENSING High Performance Computing in Remote Sensing Summary: power. Part Two describes a compendium of...

364

V-006: CA ARCserve Backup Flaws Let Remote Users Execute Arbitrary Code and Deny Service  

Broader source: Energy.gov [DOE]

Two vulnerabilities were reported in CA ARCserve Backup. A remote user can execute arbitrary code on the target system. A remote user can cause denial of service conditions.

365

U-233: Oracle Database INDEXTYPE CTXSYS.CONTEXT Bug Lets Remote...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

3: Oracle Database INDEXTYPE CTXSYS.CONTEXT Bug Lets Remote Authenticated Users Gain Elevated Privileges U-233: Oracle Database INDEXTYPE CTXSYS.CONTEXT Bug Lets Remote...

366

T-719:Apache mod_proxy_ajp HTTP Processing Error Lets Remote...  

Broader source: Energy.gov (indexed) [DOE]

719:Apache modproxyajp HTTP Processing Error Lets Remote Users Deny Service T-719:Apache modproxyajp HTTP Processing Error Lets Remote Users Deny Service September 16, 2011 -...

367

E-Print Network 3.0 - automated remote environmental Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Collection: Engineering 38 Energy-saving through remote control of a wastewater treatment plant Summary: . Keywords: Activated sludge process, Internet systems, Remote...

368

V-010: 3Com, HP, and H3C Switches SNMP Configuration Lets Remote...  

Broader source: Energy.gov (indexed) [DOE]

The vendor has issued a fix for some affected products. Addthis Related Articles U-240: Apple Remote Desktop Encryption Failure Lets Remote Users Obtain Potentially Sensitive...

369

T-529: Apple Mac OS PackageKit Distribution Script Remote Code...  

Broader source: Energy.gov (indexed) [DOE]

29: Apple Mac OS PackageKit Distribution Script Remote Code Execution Vulnerability T-529: Apple Mac OS PackageKit Distribution Script Remote Code Execution Vulnerability January...

370

T-673: Apple Safari Multiple Flaws Let Remote Users Execute Arbitrary...  

Broader source: Energy.gov (indexed) [DOE]

3: Apple Safari Multiple Flaws Let Remote Users Execute Arbitrary Code, Conduct Cross-Site Scripting Attacks T-673: Apple Safari Multiple Flaws Let Remote Users Execute Arbitrary...

371

U-247: EMC Cloud Tiering Appliance Flaw Lets Remote Users Bypass...  

Broader source: Energy.gov (indexed) [DOE]

7: EMC Cloud Tiering Appliance Flaw Lets Remote Users Bypass Authentication and Gain Administrative Access U-247: EMC Cloud Tiering Appliance Flaw Lets Remote Users Bypass...

372

Bad data packet capture device  

DOE Patents [OSTI]

An apparatus and method for capturing data packets for analysis on a network computing system includes a sending node and a receiving node connected by a bi-directional communication link. The sending node sends a data transmission to the receiving node on the bi-directional communication link, and the receiving node receives the data transmission and verifies the data transmission to determine valid data and invalid data and verify retransmissions of invalid data as corresponding valid data. A memory device communicates with the receiving node for storing the invalid data and the corresponding valid data. A computing node communicates with the memory device and receives and performs an analysis of the invalid data and the corresponding valid data received from the memory device.

Chen, Dong; Gara, Alan; Heidelberger, Philip; Vranas, Pavlos

2010-04-20T23:59:59.000Z

373

Microelectroporation device for genomic screening  

DOE Patents [OSTI]

We have developed an microelectroporation device that combines microarrays of oligonucleotides, microfluidic channels, and electroporation for cell transfection and high-throughput screening applications (e.g. RNA interference screens). Microarrays allow the deposition of thousands of different oligonucleotides in microscopic spots. Microfluidic channels and microwells enable efficient loading of cells into the device and prevent cross-contamination between different oligonucleotides spots. Electroporation allows optimal transfection of nucleic acids into cells (especially hard-to-transfect cells such as primary cells) by minimizing cell death while maximizing transfection efficiency. This invention has the advantage of a higher throughput and lower cost, while preventing cross-contamination compared to conventional screening technologies. Moreover, this device does not require bulky robotic liquid handling equipment and is inherently safer given that it is a closed system.

Perroud, Thomas D.; Renzi, Ronald F.; Negrete, Oscar; Claudnic, Mark R.

2014-09-09T23:59:59.000Z

374

Device Independent Random Number Generation  

E-Print Network [OSTI]

Randomness is an invaluable resource in today's life with a broad use reaching from numerical simulations through randomized algorithms to cryptography. However, on the classical level no true randomness is available and even the use of simple quantum devices in a prepare-measure setting suffers from lack of stability and controllability. This gave rise to a group of quantum protocols that provide randomness certified by classical statistical tests -- Device Independent Quantum Random Number Generators. In this paper we review the most relevant results in this field, which allow the production of almost perfect randomness with help of quantum devices, supplemented with an arbitrary weak source of additional randomness. This is in fact the best one could hope for to achieve, as with no starting randomness (corresponding to no free will in a different concept) even a quantum world would have a fully deterministic description.

Mataj Pivoluska; Martin Plesch

2015-02-23T23:59:59.000Z

375

Remote direct memory access over datagrams  

DOE Patents [OSTI]

A communication stack for providing remote direct memory access (RDMA) over a datagram network is disclosed. The communication stack has a user level interface configured to accept datagram related input and communicate with an RDMA enabled network interface card (NIC) via an NIC driver. The communication stack also has an RDMA protocol layer configured to supply one or more data transfer primitives for the datagram related input of the user level. The communication stack further has a direct data placement (DDP) layer configured to transfer the datagram related input from a user storage to a transport layer based on the one or more data transfer primitives by way of a lower layer protocol (LLP) over the datagram network.

Grant, Ryan Eric; Rashti, Mohammad Javad; Balaji, Pavan; Afsahi, Ahmad

2014-12-02T23:59:59.000Z

376

Remote shock sensing and notification system  

DOE Patents [OSTI]

A low-power shock sensing system includes at least one shock sensor physically coupled to a chemical storage tank to be monitored for impacts, and an RF transmitter which is in a low-power idle state in the absence of a triggering signal. The system includes interference circuitry including or activated by the shock sensor, wherein an output of the interface circuitry is coupled to an input of the RF transmitter. The interface circuitry triggers the RF transmitting with the triggering signal to transmit an alarm message to at least one remote location when the sensor senses a shock greater than a predetermined threshold. In one embodiment the shock sensor is a shock switch which provides an open and a closed state, the open state being a low power idle state.

Muralidharan, Govindarajan (Knoxville, TN); Britton, Charles L. (Alcoa, TN); Pearce, James (Lenoir City, TN); Jagadish, Usha (Knoxville, TN); Sikka, Vinod K. (Oak Ridge, TN)

2008-11-11T23:59:59.000Z

377

Method to analyze remotely sensed spectral data  

DOE Patents [OSTI]

A fast and rigorous multivariate curve resolution (MCR) algorithm is applied to remotely sensed spectral data. The algorithm is applicable in the solar-reflective spectral region, comprising the visible to the shortwave infrared (ranging from approximately 0.4 to 2.5 .mu.m), midwave infrared, and thermal emission spectral region, comprising the thermal infrared (ranging from approximately 8 to 15 .mu.m). For example, employing minimal a priori knowledge, notably non-negativity constraints on the extracted endmember profiles and a constant abundance constraint for the atmospheric upwelling component, MCR can be used to successfully compensate thermal infrared hyperspectral images for atmospheric upwelling and, thereby, transmittance effects. Further, MCR can accurately estimate the relative spectral absorption coefficients and thermal contrast distribution of a gas plume component near the minimum detectable quantity.

Stork, Christopher L. (Albuquerque, NM); Van Benthem, Mark H. (Middletown, DE)

2009-02-17T23:59:59.000Z

378

Remote power -- Integrated, customer oriented solutions  

SciTech Connect (OSTI)

Throughout its history, BP Solar has focused strongly on the production of integrated power solutions to it`s customers, using photovoltaics as the central, but not unique, technology. This paper discusses the customer driven development of two new generation hybrid power systems, one AC the other DC. Both involve the combination of renewable energy with a conventional power source in a fully integrated system, as well as providing remote electronic system access, advanced data and event logging, and comprehensive computer graphic analysis software. The first is a DC system providing power to telecommunication authorities in the Asian-Pacific region, the second is generating abundant high quality AC power for Australian domestic users.

Jordan, D.; Twidell, M.; Patel, J.; Teofilo, F.; Soin, R. [BP Solar Australia, Brookvale, New South Wales (Australia)

1994-12-31T23:59:59.000Z

379

Metamaterials for terahertz polarimetric devices  

SciTech Connect (OSTI)

We present experimental and numerical investigations of planar terahertz metamaterial structures designed to interact with the state of polarization. The dependence of metamaterial resonances on polarization results in unique amplitude and phase characteristics of the terahertz transmission, providing the basis for polarimetric terahertz devices. We highlight some potential applications for polarimetric devices and present simulations of a terahertz quarter-wave plate and a polarizing terahertz beam splitter. Although this work was performed at terahertz frequencies, it may find applications in other frequency ranges as well.

O'hara, John F [Los Alamos National Laboratory; Taylor, Antoinette J [Los Alamos National Laboratory; Smirnova, Evgenya [Los Alamos National Laboratory; Azad, Abul [Los Alamos National Laboratory

2008-01-01T23:59:59.000Z

380

Beta ray flux measuring device  

DOE Patents [OSTI]

A beta ray flux measuring device in an activated member in-core instrumentation system for pressurized water reactors. The device includes collector rings positioned about an axis in the reactor's pressure boundary. Activated members such as hydroballs are positioned within respective ones of the collector rings. A response characteristic such as the current from or charge on a collector ring indicates the beta ray flux from the corresponding hydroball and is therefore a measure of the relative nuclear power level in the region of the reactor core corresponding to the specific exposed hydroball within the collector ring.

Impink, Jr., Albert J. (Murrysville, PA); Goldstein, Norman P. (Murrysville, PA)

1990-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Surface-micromachined microfluidic devices  

DOE Patents [OSTI]

Microfluidic devices are disclosed which can be manufactured using surface-micromachining. These devices utilize an electroosmotic force or an electromagnetic field to generate a flow of a fluid in a microchannel that is lined, at least in part, with silicon nitride. Additional electrodes can be provided within or about the microchannel for separating particular constituents in the fluid during the flow based on charge state or magnetic moment. The fluid can also be pressurized in the channel. The present invention has many different applications including electrokinetic pumping, chemical and biochemical analysis (e.g. based on electrophoresis or chromatography), conducting chemical reactions on a microscopic scale, and forming hydraulic actuators.

Galambos, Paul C. (Albuquerque, NM); Okandan, Murat (Albuquerque, NM); Montague, Stephen (Albuquerque, NM); Smith, James H. (Redmond, WA); Paul, Phillip H. (Livermore, CA); Krygowski, Thomas W. (Cortlandt Manor, NY); Allen, James J. (Albuquerque, NM); Nichols, Christopher A. (Hauppauge, NY); Jakubczak, II, Jerome F. (Rio Rancho, NM)

2003-01-01T23:59:59.000Z

382

Gas sensing with acoustic devices  

SciTech Connect (OSTI)

A survey is made of acoustic devices that are suitable as gas and vapor sensors. This survey focuses on attributes such as operating frequency, mass sensitivity, quality factor (Q), and their ability to be fabricated on a semiconductor substrate to allow integration with electronic circuitry. The treatment of the device surface with chemically-sensitive films to detect species of interest is discussed. Strategies for improving discrimination are described, including sensor arrays and species concentration and separation schemes. The advantages and disadvantages of integrating sensors with microelectronics are considered, along with the effect on sensitivity of scaling acoustic gas sensors to smaller size.

Martin, S.J.; Frye, G.C. [Sandia National Labs., Albuquerque, NM (United States); Spates, J.J. [Ktech Corp., Albuquerque, NM (United States); Butler, M.A. [Sandia National Labs., Albuquerque, NM (United States)

1996-12-31T23:59:59.000Z

383

Implantable biomedical devices on bioresorbable substrates  

DOE Patents [OSTI]

Provided herein are implantable biomedical devices, methods of administering implantable biomedical devices, methods of making implantable biomedical devices, and methods of using implantable biomedical devices to actuate a target tissue or sense a parameter associated with the target tissue in a biological environment. Each implantable biomedical device comprises a bioresorbable substrate, an electronic device having a plurality of inorganic semiconductor components supported by the bioresorbable substrate, and a barrier layer encapsulating at least a portion of the inorganic semiconductor components. Upon contact with a biological environment the bioresorbable substrate is at least partially resorbed, thereby establishing conformal contact between the implantable biomedical device and the target tissue in the biological environment.

Rogers, John A; Kim, Dae-Hyeong; Omenetto, Fiorenzo; Kaplan, David L; Litt, Brian; Viventi, Jonathan; Huang, Yonggang; Amsden, Jason

2014-03-04T23:59:59.000Z

384

Remotely controlled sensor apparatus for use in dig-face characterization system  

DOE Patents [OSTI]

A remotely controlled sensor platform apparatus useful in a dig-face characterization system is deployed from a mobile delivery device such as standard heavy construction equipment. The sensor apparatus is designed to stabilize sensors against extraneous motions induced by heavy equipment manipulations or other outside influences, and includes a terrain sensing and sensor elevation control system to maintain the sensors in close ground proximity. The deployed sensor apparatus is particularly useful in collecting data in work environments where human access is difficult due to the presence of hazardous conditions, rough terrain, or other circumstances that prevent efficient data collection by conventional methods. Such work environments include hazardous waste sites, unexploded ordnance sites, or construction sites. Data collection in these environments by utilizing the deployed sensor apparatus is desirable in order to protect human health and safety, or to assist in planning daily operations to increase efficiency. 13 figs.

Josten, N.E.; Svoboda, J.M.

1999-05-25T23:59:59.000Z

385

Remotely controlled sensor apparatus for use in dig-face characterization system  

DOE Patents [OSTI]

A remotely controlled sensor platform apparatus useful in a dig-face characterization system is deployed from a mobile delivery device such as standard heavy construction equipment. The sensor apparatus is designed to stabilize sensors against extraneous motions induced by heavy equipment manipulations or other outside influences, and includes a terrain sensing and sensor elevation control system to maintain the sensors in close ground proximity. The deployed sensor apparatus is particularly useful in collecting data in work environments where human access is difficult due to the presence of hazardous conditions, rough terrain, or other circumstances that prevent efficient data collection by conventional methods. Such work environments include hazardous waste sites, unexploded ordnance sites, or construction sites. Data collection in these environments by utilizing the deployed sensor apparatus is desirable in order to protect human health and safety, or to assist in planning daily operations to increase efficiency.

Josten, Nicholas E. (Idaho Falls, ID); Svoboda, John M. (Idaho Falls, ID)

1999-01-01T23:59:59.000Z

386

High resolution biomedical imaging system with direct detection of x-rays via a charge coupled device  

DOE Patents [OSTI]

An imaging system is provided for direct detection of x-rays from an irradiated biological tissue. The imaging system includes an energy source for emitting x-rays toward the biological tissue and a charge coupled device (CCD) located immediately adjacent the biological tissue and arranged transverse to the direction of irradiation along which the x-rays travel. The CCD directly receives and detects the x-rays after passing through the biological tissue. The CCD is divided into a matrix of cells, each of which individually stores a count of x-rays directly detected by the cell. The imaging system further includes a pattern generator electrically coupled to the CCD for reading a count from each cell. A display device is provided for displaying an image representative of the count read by the pattern generator from the cells of the CCD. 13 figs.

Atac, M.; McKay, T.A.

1998-04-21T23:59:59.000Z

387

High resolution biomedical imaging system with direct detection of x-rays via a charge coupled device  

DOE Patents [OSTI]

An imaging system is provided for direct detection of x-rays from an irradiated biological tissue. The imaging system includes an energy source for emitting x-rays toward the biological tissue and a charge coupled device (CCD) located immediately adjacent the biological tissue and arranged transverse to the direction of irradiation along which the x-rays travel. The CCD directly receives and detects the x-rays after passing through the biological tissue. The CCD is divided into a matrix of cells, each of which individually stores a count of x-rays directly detected by the cell. The imaging system further includes a pattern generator electrically coupled to the CCD for reading a count from each cell. A display device is provided for displaying an image representative of the count read by the pattern generator from the cells of the CCD.

Atac, Muzaffer (Wheaton, IL); McKay, Timothy A. (Ann Arbor, MI)

1998-01-01T23:59:59.000Z

388

Encapsulation methods for organic electrical devices  

DOE Patents [OSTI]

The disclosure provides methods and materials suitable for use as encapsulation barriers in electronic devices. In one embodiment, for example, there is provided an electroluminescent device or other electronic device encapsulated by alternating layers of a silicon-containing bonding material and a ceramic material. The encapsulation methods provide, for example, electronic devices with increased stability and shelf-life. The invention is useful, for example, in the field of microelectronic devices.

Blum, Yigal D.; Chu, William Siu-Keung; MacQueen, David Brent; Shi, Yijian

2013-06-18T23:59:59.000Z

389

International Multi-Conference on Systems, Signals & Devices  

E-Print Network [OSTI]

- gram EVALPSN 104 Kazumi Nakamatsu Keynote Lecture Smart metering based on automated meter reading 106

390

Mechanical scriber for semiconductor devices  

DOE Patents [OSTI]

A mechanical scriber using a scribing tip, such as a diamond, provides controlled scriber forces with a spring-loaded compound lever arrangement. The scribing force and range of scribing depth are adjusted by a pair of adjustable micrometer heads. A semiconductor device, such as a multilayer solar cell, can be formed into scribed strips at each layer.

Lin, Peter T. (East Brunswick, NJ)

1985-01-01T23:59:59.000Z

391

Mechanical scriber for semiconductor devices  

DOE Patents [OSTI]

A mechanical scriber using a scribing tip, such as a diamond, provides controlled scriber forces with a spring-loaded compound lever arrangement. The scribing force and range of scribing depth are adjusted by a pair of adjustable micrometer heads. A semiconductor device, such as a multilayer solar cell, can be formed into scribed strips at each layer. 5 figs.

Lin, P.T.

1985-03-05T23:59:59.000Z

392

Surface-Micromachined Microfluidic Devices  

DOE Patents [OSTI]

Microfluidic devices are disclosed which can be manufactured using surface-micromachining. These devices utilize an electroosmotic force or an electromagnetic field to generate a flow of a fluid in a microchannel that is lined, at least in part, with silicon nitride. Additional electrodes can be provided within or about the microchannel for separating particular constituents in the fluid during the flow based on charge state or magnetic moment. The fluid can also be pressurized in the channel. The present invention has many different applications including electrokinetic pumping, chemical and biochemical analysis (e.g. based on electrophoresis or chromatography), conducting chemical reactions on a microscopic scale, and forming hydraulic actuators. Microfluidic devices are disclosed which can be manufactured using surface-micromachining. These devices utilize an electroosmotic force or an electromagnetic field to generate a flow of a fluid in a microchannel that is lined, at least in part, with silicon nitride. Additional electrodes can be provided within or about the microchannel for separating particular constituents in the fluid during the flow based on charge state or magnetic moment. The fluid can also be pressurized in the channel. The present invention has many different applications including electrokinetic pumping, chemical and biochemical analysis (e.g. based on electrophoresis or chromatography), conducting chemical reactions on a microscopic scale, and forming hydraulic actuators.

Galambos, Paul C. (Albuquerque, NM); Okandan, Murat (Albuquerque, NM); Montague, Stephen (Albuquerque, NM); Smith, James H. (Redmond, WA); Paul, Phillip H. (Livermore, CA); Krygowski, Thomas W. (Coutlandt Manor, NY); Allen, James J. (Albuquerque, NM); Nichols, Christopher A. (Hauppauge, NY); Jakubczak, II, Jerome F. (Rio Rancho, NM)

2004-09-28T23:59:59.000Z

393

High performance thermoelectric nanocomposite device  

DOE Patents [OSTI]

A thermoelectric device includes a nanocomposite material with nanowires of at least one thermoelectric material having a predetermined figure of merit, the nanowires being formed in a porous substrate having a low thermal conductivity and having an average pore diameter ranging from about 4 nm to about 300 nm.

Yang, Jihui (Lakeshore, CA); Snyder, Dexter D. (Birmingham, MI)

2011-10-25T23:59:59.000Z

394

Interdigitated photovoltaic power conversion device  

DOE Patents [OSTI]

A photovoltaic power conversion device has a top surface adapted to receive impinging radiation. The device includes at least two adjacent, serially connected cells. Each cell includes a semi-insulating substrate and a lateral conductivity layer of a first doped electrical conductivity disposed on the substrate. A base layer is disposed on the lateral conductivity layer and has the same electrical charge conductivity thereof. An emitter layer of a second doped electrical conductivity of opposite electrical charge is disposed on the base layer and forms a p-n junction therebetween. A plurality of spaced channels are formed in the emitter and base layers to expose the lateral conductivity layer at the bottoms thereof. A front contact grid is positioned on the top surface of the emitter layer of each cell. A first current collector is positioned along one outside edge of at least one first cell. A back contact grid is positioned in the channels at the top surface of the device for engagement with the lateral conductivity layer. A second current collector is positioned along at least one outside edge of at least one oppositely disposed second cell. Finally, an interdigitation mechanism is provided for serially connecting the front contact grid of one cell to the back contact grid of an adjacent cell at the top surface of the device.

Ward, James Scott (Englewood, CO); Wanlass, Mark Woodbury (Golden, CO); Gessert, Timothy Arthur (Conifer, CO)

1999-01-01T23:59:59.000Z

395

In situ biofilm coupon device  

DOE Patents [OSTI]

An apparatus is disclosed for characterization of in-situ microbial biofilm populations in subsurface groundwater. The device permits biofilm-forming microorganisms to adhere to packing material while emplaced in a groundwater strata, so that the packing material can be later analyzed for quantity and type of microorganisms, growth rate, and nutrient requirements. 3 figs.

Peyton, B.M.; Truex, M.J.

1997-06-24T23:59:59.000Z

396

Interdigitated photovoltaic power conversion device  

DOE Patents [OSTI]

A photovoltaic power conversion device has a top surface adapted to receive impinging radiation. The device includes at least two adjacent, serially connected cells. Each cell includes a semi-insulating substrate and a lateral conductivity layer of a first doped electrical conductivity disposed on the substrate. A base layer is disposed on the lateral conductivity layer and has the same electrical charge conductivity thereof. An emitter layer of a second doped electrical conductivity of opposite electrical charge is disposed on the base layer and forms a p-n junction therebetween. A plurality of spaced channels are formed in the emitter and base layers to expose the lateral conductivity layer at the bottoms thereof. A front contact grid is positioned on the top surface of the emitter layer of each cell. A first current collector is positioned along one outside edge of at least one first cell. A back contact grid is positioned in the channels at the top surface of the device for engagement with the lateral conductivity layer. A second current collector is positioned along at least one outside edge of at least one oppositely disposed second cell. Finally, an interdigitation mechanism is provided for serially connecting the front contact grid of one cell to the back contact grid of an adjacent cell at the top surface of the device. 15 figs.

Ward, J.S.; Wanlass, M.W.; Gessert, T.A.

1999-04-27T23:59:59.000Z

397

Aerosol can waste disposal device  

DOE Patents [OSTI]

Disclosed is a device for removing gases and liquid from containers. The ice punctures the bottom of a container for purposes of exhausting gases and liquid from the container without their escaping into the atmosphere. The device includes an inner cup or cylinder having a top portion with an open end for receiving a container and a bottom portion which may be fastened to a disposal or waste container in a substantially leak-proof manner. A piercing device is mounted in the lower portion of the inner cylinder for puncturing the can bottom placed in the inner cylinder. An outer cylinder having an open end and a closed end fits over the top portion of the inner cylinder in telescoping engagement. A force exerted on the closed end of the outer cylinder urges the bottom of a can in the inner cylinder into engagement with the piercing device in the bottom of the inner cylinder to form an opening in the can bottom, thereby permitting the contents of the can to enter the disposal container.

O'Brien, Michael D. (Las Vegas, NV); Klapperick, Robert L. (Las Vegas, NV); Bell, Chris (Las Vegas, NV)

1993-01-01T23:59:59.000Z

398

Engagement in Reading and Access to Print: The Relationship of Home and School to Overall Reading Achievement Among Fourth Grade English Speakers  

E-Print Network [OSTI]

speakers from Canada (Alberta, British Columbia, and Nova Scotia), New Zealand, England, and USA. Data from the Progress in International Reading Literacy Study (PIRLS) questionnaires and reading achievement test were used to design the two models...

Allaith, Zainab A.

2013-04-05T23:59:59.000Z

399

Reactor Decommissioning - Balancing Remote and Manual Activities - 12159  

SciTech Connect (OSTI)

Nuclear reactors come in a wide variety of styles, size, and ages. However, during decommissioned one issue they all share is the balancing of remotely and manually activities. For the majority of tasks there is a desire to use manual methods because remote working can be slower, more expensive, and less reliable. However, because of the unique hazards of nuclear reactors some level of remote activity will be necessary to provide adequate safety to workers and properly managed and designed it does not need to be difficult nor expensive. The balance of remote versus manual work can also affect the amount and types of waste that is generated. S.A.Technology (SAT) has worked on a number of reactor decommissioning projects over the last two decades and has a range of experience with projects using remote methods to those relying primarily on manual activities. This has created a set of lessons learned and best practices on how to balance the need for remote handling and manual operations. Finding a balance between remote and manual operations on reactor decommissioning can be difficult but by following certain broad guidelines it is possible to have a very successfully decommissioning. It is important to have an integrated team that includes remote handling experts and that this team plans the work using characterization efforts that are efficient and realistic. The equipment need to be simple, robust and flexible and supported by an on-site team committed to adapting to day-to-day challenges. Also, the waste strategy needs to incorporate the challenges of remote activities in its planning. (authors)

Cole, Matt [S.A. Technology (United States)

2012-07-01T23:59:59.000Z

400

Remote control of off-shore oil field production equipment  

E-Print Network [OSTI]

REMOTE CONTROL OF OFF-SHORE OIL FIELD PRODUCTION EQUIPMENT A Thesis Alton W. Sissom 1949 Approve as to style and on n by Cha1rman of omm1ttee REMOTE CONTROL OF OFFSHORE OIL FIELD PRODUCTION EQUIPMENT A Thesis Alton W. Oissom 1949 REMOTE...-Carrier Channel 26 PZNOTE CONTROL OF OFF-SHORE OIL FIELD PRODUCTION K, 'UIPMENT I GENERAL IiPOPPUi TION Since the beginning of the exploitation of the under-sea oil deposits in the Gulf' of qexico, most, of the territory off the shores of Texas and Louisiana...

Sissom, Alton Wayne

2012-06-07T23:59:59.000Z

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Quantum vs. Classical Read-once Branching Programs  

E-Print Network [OSTI]

The paper presents the first nontrivial upper and lower bounds for (non-oblivious) quantum read-once branching programs. It is shown that the computational power of quantum and classical read-once branching programs is incomparable in the following sense: (i) A simple, explicit boolean function on 2n input bits is presented that is computable by error-free quantum read-once branching programs of size O(n^3), while each classical randomized read-once branching program and each quantum OBDD for this function with bounded two-sided error requires size 2^{\\Omega(n)}. (ii) Quantum branching programs reading each input variable exactly once are shown to require size 2^{\\Omega(n)} for computing the set-disjointness function DISJ_n from communication complexity theory with two-sided error bounded by a constant smaller than 1/2-2\\sqrt{3}/7. This function is trivially computable even by deterministic OBDDs of linear size. The technically most involved part is the proof of the lower bound in (ii). For this, a new model of quantum multi-partition communication protocols is introduced and a suitable extension of the information cost technique of Jain, Radhakrishnan, and Sen (2003) to this model is presented.

Martin Sauerhoff

2005-09-23T23:59:59.000Z

402

Evaluation of Miscellaneous and Electronic Device Energy Use in Hospitals  

E-Print Network [OSTI]

of Devices Device Category Infusion Pump Sphygmomanometer,Fixed Sphygmomanometer, Portable Pulse Oximeters, Portable

Black, Douglas R.

2014-01-01T23:59:59.000Z

403

Remote Chemical Sensing Using Quantum Cascade Lasers  

SciTech Connect (OSTI)

Research done by the IR sensors team at PNNL is focused on developing advanced spectroscopic methods for detecting signatures of nuclear, chemical, biological and explosives weapons or weapons production. The sensors we develop fall into two categories: remote sensors that can be operated at distances ranging from 150 m to 10 km, and point sensors that are used for in-situ inspection and detection. FY03 has seen an explosion in FM DIAL progress with the net result being solid confirmation that FM DIAL is a technique capable of remote chemical monitoring in a wide variety of venues. For example, FM DIAL was used to detect a small plume of hydrogen sulfide, a candidate CW agent, released in the desert environment of the Hanford 200 Area site. These experiments were conducted over a range of physical conditions including outside temperatures ranging from 70 F to 105 F and turbulence conditions ranging from quiescent to chaotic. We are now rapidly developing the information needed to design prototype FM DIAL systems that are optimized for specific applications that include scenarios such as fixed position stand-off detection and mobile UAV mounted remote monitoring. Just as an example, in FY04 we will use FM DIAL to detect both in-facility and outdoor release of enriched UF6. The rapid progress in FM DIAL research made in FY03 is attributed to several advances. First, final construction of a custom-designed trailer allowed the instrument to be housed in a mobile temperature-controlled environment. This allowed the experiment to be transported to several locations so that data could be collected under a range of physical conditions. This has led to a better understanding of a variety of experimental noise sources. With this knowledge, we have been able to implement several changes in the way the FM DIAL data is collected and processed, with the net result being a drastic improvement in our confidence of analyte concentration measurement and an improvement i n the instrument detection limit. The range of chemicals detectable by FM DIAL has also been extended. Prior to FY03 only water and nitrous oxide (N2O) had been seen. Experiments on extending the tuning range of the quantum cascade laser (QCL) currently used in the experiments demonstrate that many more species are now accessible including H2S, C2F4H2, and CH4. We additionally demonstrated that FM DIAL measurements can be made using short wave infrared (SWIR) telecommunications lasers. While measurements made using these components are noisier because turbulence and particulate matter cause more interference in this spectral region, monitoring in this region enables larger species to be detected simply because these lasers have a greater tuning range. In addition, SWIR monitoring also allows for the detection of second-row hydride species such as HF and HCl, which are important nuclear and CWA proliferation signatures.

Harper, Warren W.; Strasburg, Jana D.; Aker, Pam M.; Schultz, John F.

2004-01-20T23:59:59.000Z

404

Hardware device binding and mutual authentication  

DOE Patents [OSTI]

Detection and deterrence of device tampering and subversion by substitution may be achieved by including a cryptographic unit within a computing device for binding multiple hardware devices and mutually authenticating the devices. The cryptographic unit includes a physically unclonable function ("PUF") circuit disposed in or on the hardware device, which generates a binding PUF value. The cryptographic unit uses the binding PUF value during an enrollment phase and subsequent authentication phases. During a subsequent authentication phase, the cryptographic unit uses the binding PUF values of the multiple hardware devices to generate a challenge to send to the other device, and to verify a challenge received from the other device to mutually authenticate the hardware devices.

Hamlet, Jason R; Pierson, Lyndon G

2014-03-04T23:59:59.000Z

405

Remote-Handled Transuranic Content Codes  

SciTech Connect (OSTI)

The Remote-Handled Transuranic (RH-TRU) Content Codes (RH-TRUCON) document describes the inventory of RH-TRU waste within the transportation parameters specified by the Remote-Handled Transuranic Waste Authorized Methods for Payload Control (RH-TRAMPAC).1 The RH-TRAMPAC defines the allowable payload for the RH-TRU 72-B. This document is a catalog of RH-TRU 72-B authorized contents by site. A content code is defined by the following components: A two-letter site abbreviation that designates the physical location of the generated/stored waste (e.g., ID for Idaho National Laboratory [INL]). The site-specific letter designations for each of the sites are provided in Table 1. A three-digit code that designates the physical and chemical form of the waste (e.g., content code 317 denotes TRU Metal Waste). For RH-TRU waste to be transported in the RH-TRU 72-B, the first number of this three-digit code is 3. The second and third numbers of the three-digit code describe the physical and chemical form of the waste. Table 2 provides a brief description of each generic code. Content codes are further defined as subcodes by an alpha trailer after the three-digit code to allow segregation of wastes that differ in one or more parameter(s). For example, the alpha trailers of the subcodes ID 322A and ID 322B may be used to differentiate between waste packaging configurations. As detailed in the RH-TRAMPAC, compliance with flammable gas limits may be demonstrated through the evaluation of compliance with either a decay heat limit or flammable gas generation rate (FGGR) limit per container specified in approved content codes. As applicable, if a container meets the watt*year criteria specified by the RH-TRAMPAC, the decay heat limits based on the dose-dependent G value may be used as specified in an approved content code. If a site implements the administrative controls outlined in the RH-TRAMPAC and Appendix 2.4 of the RH-TRU Payload Appendices, the decay heat or FGGR limits based on a 10-day shipping period (rather than the standard 60-day shipping period) may be used as specified in an approved content code.

Washington TRU Solutions

2006-12-01T23:59:59.000Z

406

Measuring Greenland Glacier Dynamics with Remotely Sensed Data  

E-Print Network [OSTI]

Measuring Greenland Glacier Dynamics with Remotely Sensed Data Steve Foga University of Kansas, Geography M.A. Student Photo by: Phil Pasquini The importance of studying glacier ice Study area Difference in ice velocity of Helheim Glacier...

Foga, Steve

2013-01-15T23:59:59.000Z

407

Toward a Remotely-Manned Energy and Production Economy  

E-Print Network [OSTI]

We can solve many problems of Energy, Health, Productivity, and Environmental Quality by improving the technology of remote control. This will produce Nuclear Safety and Security, Advances in Mining, Increases in ...

Minsky, Marvin

1979-09-01T23:59:59.000Z

408

V-218: HP Service Manager Unspecified Flaw Lets Remote Users...  

Broader source: Energy.gov (indexed) [DOE]

A remote user can gain unauthorized access on the target system. IMPACT: User access via network SOLUTION: The vendor has issued a fix. Addthis Related Articles U-010:HP Onboard...

409

Photovoltaic-powered desalination system for remote Australian communities  

E-Print Network [OSTI]

This paper reports on the design and successful field testing of a photovoltaic (PV)-powered desalination system. The system described here is intended for use in remote areas of the Australian outback, where fresh water is extremely limited...

Richards, B.S.; Schfer, Andrea

2003-01-01T23:59:59.000Z

410

Remote depth survey of the Charles River Basin  

E-Print Network [OSTI]

Unmanned vehicles may provide more time- and cost-effective methods of gathering hydrographic survey data when compared to traditional, manned survey vessels. A remote-controlled unmanned surface vehicle (USV) was outfitted ...

Karlik, Evan A

2007-01-01T23:59:59.000Z

411

Status of ITER neutral beam cell remote handling system  

E-Print Network [OSTI]

The ITER neutral beam cell will contain up to three heating neutral beams and one diagnostic neutral beam, and four upper ports. Though manual maintenance work is envisaged within the cell, when containment is breached, or the radiological protection is removed the maintenance must be conducted remotely. This maintenance constitutes the removal and replacement of line replaceable units, and their transport to and from a cask docked to the cell. A design of the remote handling system has been prepared to concept level which this paper describes including the development of a beam line transporter, beam source remote handling equipment, upper port remote handling equipment and equipment for the maintenance of the neutral shield. This equipment has been developed complete the planned maintenance tasks for the components of the neutral beam cell and to have inherent flexibility to enable as yet unforeseen tasks and recovery operations to be performed.

Sykes, N; Choi, C-H; Crofts, O; Crowe, R; Damiani, C; Delavalle, S; Meredith, L; Mindham, T; Raimbach, J; Tesini, A; Van Uffelen, M

2013-01-01T23:59:59.000Z

412

Recombination device for storage batteries  

DOE Patents [OSTI]

A recombination device including a gas-tight enclosure connected to receive the discharge gases from a rechargeable storage battery. Catalytic material for the recombination of hydrogen and oxygen to form water is supported within the enclosure. The enclosure is sealed from the atmosphere by a liquid seal including two vertical chambers interconnected with an inverted U-shaped overflow tube. The first chamber is connected at its upper portion to the enclosure and the second chamber communicates at its upper portion with the atmosphere. If the pressure within the enclosure differs as overpressure or vacuum by more than the liquid level, the liquid is forced into one of the two chambers and the overpressure is vented or the vacuum is relieved. The recombination device also includes means for returning recombined liquid to the battery and for absorbing metal hydrides.

Kraft, H.; Ledjeff, K.

1984-01-01T23:59:59.000Z

413

Recombination device for storage batteries  

DOE Patents [OSTI]

A recombination device including a gas-tight enclosure connected to receive he discharge gases from a rechargeable storage battery. Catalytic material for the recombination of hydrogen and oxygen to form water is supported within the enclosure. The enclosure is sealed from the atmosphere by a liquid seal including two vertical chambers interconnected with an inverted U-shaped overflow tube. The first chamber is connected at its upper portion to the enclosure and the second chamber communicates at its upper portion with the atmosphere. If the pressure within the enclosure differs as overpressure or vacuum by more than the liquid level, the liquid is forced into one of the two chambers and the overpressure is vented or the vacuum is relieved. The recombination device also includes means for returning recombined liquid to the battery and for absorbing metal hydrides.

Kraft, Helmut (Liederbach, DE); Ledjeff, Konstantin (Bad Krozingen, DE)

1985-01-01T23:59:59.000Z

414

Variable ratio regenerative braking device  

DOE Patents [OSTI]

Disclosed is a regenerative braking device (10) for an automotive vehicle. The device includes an energy storage assembly (12) having a plurality of rubber rollers (26, 28) mounted for rotation between an input shaft (36) and an output shaft (42), clutches (38, 46) and brakes (40, 48) associated with each shaft, and a continuously variable transmission (22) connectable to a vehicle drivetrain and to the input and output shafts by the respective clutches. The rubber rollers are torsionally stressed to accumulate energy from the vehicle when the input shaft is clutched to the transmission while the brake on the output shaft is applied, and are torsionally relaxed to deliver energy to the vehicle when the output shaft is clutched to the transmission while the brake on the input shaft is applied. The transmission ratio is varied to control the rate of energy accumulation and delivery for a given rotational speed of the vehicle drivetrain.

Hoppie, Lyle O. (Birmingham, MI)

1981-12-15T23:59:59.000Z

415

Neutron-absorber release device  

DOE Patents [OSTI]

A resettable device is provided for supporting an object, sensing when an environment reaches a critical temperature and releasing the object when the critical temperature is reached. It includes a flexible container having a material inside with a melting point at the critical temperature. The object's weight is supported by the solid material which gives rigidity to the container until the critical temperature is reached at which point the material in the container melts. The flexible container with the now fluid material inside has insufficient strength to support the object which is thereby released. Biasing means forces the container back to its original shape so that when the temperature falls below the melting temperature the material again solidifies, and the object may again be supported by the device.

VAN Erp, Jan B. (Hinsdale, IL); Kimont, Edward L. (Evergreen Park, IL)

1976-01-01T23:59:59.000Z

416

Nanowire structures and electrical devices  

DOE Patents [OSTI]

The present invention provides structures and devices comprising conductive segments and conductance constricting segments of a nanowire, such as metallic, superconducting or semiconducting nanowire. The present invention provides structures and devices comprising conductive nanowire segments and conductance constricting nanowire segments having accurately selected phases including crystalline and amorphous states, compositions, morphologies and physical dimensions, including selected cross sectional dimensions, shapes and lengths along the length of a nanowire. Further, the present invention provides methods of processing nanowires capable of patterning a nanowire to form a plurality of conductance constricting segments having selected positions along the length of a nanowire, including conductance constricting segments having reduced cross sectional dimensions and conductance constricting segments comprising one or more insulating materials such as metal oxides.

Bezryadin, Alexey (Champaign, IL); Remeika, Mikas (Urbana, IL)

2010-07-06T23:59:59.000Z

417

Solid state laser media driven by remote nuclear powered fluorescence  

DOE Patents [OSTI]

An apparatus is provided for driving a solid state laser by a nuclear powered fluorescence source which is located remote from the fluorescence source. A nuclear reaction produced in a reaction chamber generates fluorescence or photons. The photons are collected from the chamber into a waveguide, such as a fiber optic waveguide. The waveguide transports the photons to the remote laser for exciting the laser.

Prelas, Mark A. (Columbia, MO)

1992-01-01T23:59:59.000Z

418

Hybrid protocol of remote implementations of quantum operations  

E-Print Network [OSTI]

We propose a protocol of remote implementations of quantum operations by hybridizing bidirectional quantum state teleportation's (BQST) and Wang's one. The protocol is available for remote implemetations of quantum operations in the restricted sets specified in Sec. III. We also give the proof of the protocol and point out its optimization. As an extension, this hybrid protocol can be reduced to BQST and Wang protocols.

Ning Bo Zhao; An Min Wang

2007-08-04T23:59:59.000Z

419

Encapsulant materials and associated devices  

DOE Patents [OSTI]

Compositions suitable for use as encapsulants are described. The inventive compositions include a high molecular weight polymeric material, a curing agent, an inorganic compound, and a coupling agent. Optional elements include adhesion promoting agents, colorants, antioxidants, and UV absorbers. The compositions have desirable diffusivity properties, making them suitable for use in devices in which a substantial blocking of moisture ingress is desired, such as photovoltaic (PV) modules.

Kempe, Michael D (Littleton, CO); Thapa, Prem (Lima, OH)

2012-05-22T23:59:59.000Z

420

Encapsulant materials and associated devices  

DOE Patents [OSTI]

Compositions suitable for use as encapsulants are described. The inventive compositions include a high molecular weight polymeric material, a curing agent, an inorganic compound, and a coupling agent. Optional elements include adhesion promoting agents, colorants, antioxidants, and UV absorbers. The compositions have desirable diffusivity properties, making them suitable for use in devices in which a substantial blocking of moisture ingress is desired, such as photovoltaic (PV) modules.

Kempe, Michael D (Littleton, CO); Thapa, Prem (Lima, OH)

2011-03-08T23:59:59.000Z

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Remote geologic structural analysis of Yucca Flat  

SciTech Connect (OSTI)

The Remote Geologic Analysis (RGA) system was developed by Pacific Northwest Laboratory (PNL) to identify crustal structures that may affect seismic wave propagation from nuclear tests. Using automated methods, the RGA system identifies all valleys in a digital elevation model (DEM), fits three-dimensional vectors to valley bottoms, and catalogs all potential fracture or fault planes defined by coplanar pairs of valley vectors. The system generates a cluster hierarchy of planar features having greater-than-random density that may represent areas of anomalous topography manifesting structural control of erosional drainage development. Because RGA uses computer methods to identify zones of hypothesized control of topography, ground truth using a well-characterized test site was critical in our evaluation of RGA's characterization of inaccessible test sites for seismic verification studies. Therefore, we applied RGA to a study area centered on Yucca Flat at the Nevada Test Site (NTS) and compared our results with both mapped geology and geologic structures and with seismic yield-magnitude models. This is the final report of PNL's RGA development project for peer review within the US Department of Energy Office of Arms Control (OAC) seismic-verification community. In this report, we discuss the Yucca Flat study area, the analytical basis of the RGA system and its application to Yucca Flat, the results of the analysis, and the relation of the analytical results to known topography, geology, and geologic structures. 41 refs., 39 figs., 2 tabs.

Foley, M.G.; Heasler, P.G.; Hoover, K.A. (Pacific Northwest Lab., Richland, WA (United States)); Rynes, N.J. (Northern Illinois Univ., De Kalb, IL (United States)); Thiessen, R.L.; Alfaro, J.L. (Washington State Univ., Pullman, WA (United States))

1991-12-01T23:59:59.000Z

422

Remote geologic structural analysis of Yucca Flat  

SciTech Connect (OSTI)

The Remote Geologic Analysis (RGA) system was developed by Pacific Northwest Laboratory (PNL) to identify crustal structures that may affect seismic wave propagation from nuclear tests. Using automated methods, the RGA system identifies all valleys in a digital elevation model (DEM), fits three-dimensional vectors to valley bottoms, and catalogs all potential fracture or fault planes defined by coplanar pairs of valley vectors. The system generates a cluster hierarchy of planar features having greater-than-random density that may represent areas of anomalous topography manifesting structural control of erosional drainage development. Because RGA uses computer methods to identify zones of hypothesized control of topography, ground truth using a well-characterized test site was critical in our evaluation of RGA`s characterization of inaccessible test sites for seismic verification studies. Therefore, we applied RGA to a study area centered on Yucca Flat at the Nevada Test Site (NTS) and compared our results with both mapped geology and geologic structures and with seismic yield-magnitude models. This is the final report of PNL`s RGA development project for peer review within the US Department of Energy Office of Arms Control (OAC) seismic-verification community. In this report, we discuss the Yucca Flat study area, the analytical basis of the RGA system and its application to Yucca Flat, the results of the analysis, and the relation of the analytical results to known topography, geology, and geologic structures. 41 refs., 39 figs., 2 tabs.

Foley, M.G.; Heasler, P.G.; Hoover, K.A. [Pacific Northwest Lab., Richland, WA (United States); Rynes, N.J. [Northern Illinois Univ., De Kalb, IL (United States); Thiessen, R.L.; Alfaro, J.L. [Washington State Univ., Pullman, WA (United States)

1991-12-01T23:59:59.000Z

423

Infrared emitting device and method  

DOE Patents [OSTI]

An infrared emitting device and method. The infrared emitting device comprises a III-V compound semiconductor substrate upon which are grown a quantum-well active region having a plurality of quantum-well layers formed of a ternary alloy comprising InAsSb sandwiched between barrier layers formed of a ternary alloy having a smaller lattice constant and a larger energy bandgap than the quantum-well layers. The quantum-well layers are preferably compressively strained to increase the threshold energy for Auger recombination; and a method is provided for determining the preferred thickness for the quantum-well layers. Embodiments of the present invention are described having at least one cladding layer to increase the optical and carrier confinement in the active region, and to provide for waveguiding of the light generated within the active region. Examples have been set forth showing embodiments of the present invention as surface- and edge-emitting light emitting diodes (LEDs), an optically-pumped semiconductor laser, and an electrically-injected semiconductor diode laser. The light emission from each of the infrared emitting devices of the present invention is in the midwave infrared region of the spectrum from about 2 to 6 microns.

Kurtz, Steven R. (Albuquerque, NM); Biefeld, Robert M. (Albuquerque, NM); Dawson, L. Ralph (Albuquerque, NM); Howard, Arnold J. (Albuquerque, NM); Baucom, Kevin C. (Albuquerque, NM)

1997-01-01T23:59:59.000Z

424

Release strategies for making transferable semiconductor structures, devices and device components  

DOE Patents [OSTI]

Provided are methods for making a device or device component by providing a multilayer structure having a plurality of functional layers and a plurality of release layers and releasing the functional layers from the multilayer structure by separating one or more of the release layers to generate a plurality of transferable structures. The transferable structures are printed onto a device substrate or device component supported by a device substrate. The methods and systems provide means for making high-quality and low-cost photovoltaic devices, transferable semiconductor structures, (opto-)electronic devices and device components.

Rogers, John A; Nuzzo, Ralph G; Meitl, Matthew; Ko, Heung Cho; Yoon, Jongseung; Menard, Etienne; Baca, Alfred J

2014-11-25T23:59:59.000Z

425

Release strategies for making transferable semiconductor structures, devices and device components  

DOE Patents [OSTI]

Provided are methods for making a device or device component by providing a multilayer structure having a plurality of functional layers and a plurality of release layers and releasing the functional layers from the multilayer structure by separating one or more of the release layers to generate a plurality of transferable structures. The transferable structures are printed onto a device substrate or device component supported by a device substrate. The methods and systems provide means for making high-quality and low-cost photovoltaic devices, transferable semiconductor structures, (opto-)electronic devices and device components.

Rogers, John A. (Champaign, IL); Nuzzo, Ralph G. (Champaign, IL); Meitl, Matthew (Raleigh, NC); Ko, Heung Cho (Urbana, IL); Yoon, Jongseung (Urbana, IL); Menard, Etienne (Durham, NC); Baca, Alfred J. (Urbana, IL)

2011-04-26T23:59:59.000Z

426

Lip Reading for Robust Speech Recognition on Embedded Devices Jess F. Guitarte Prez , Alejandro F. Frangi Eduardo Lleida Solano 3  

E-Print Network [OSTI]

. Frangi Eduardo Lleida Solano 3 and Klaus Lukas13,1 2 1 Siemens AG, Corporate Technology, Otto-Hahn-Ring 6, Spain. jesus.guitarte@siemens.com, alejandro.frangi@upf.edu, lleida@unizar.es, lukas@siemens transformation (DCT) have been investigated and discussed for an embedded implementation. The audio

Frangi, Alejandro

427

A microfluidic device based on droplet storage for screening solubility diagrams  

E-Print Network [OSTI]

This work describes a new microfluidic device developed for rapid screening of solubility diagrams. In several parallel channels, hundreds of nanoliter-volume droplets of a given solution are first stored with a gradual variation in the solute concentration. Then, the application of a temperature gradient along these channels enables us to read directly and quantitatively phase diagrams, concentration vs. temperature. We show, using a solution of adipic acid, that we can measure ten points of the solubility curve in less than 1 hr and with only 250 $\\mu$L of solution.

P. Laval; N. Lisai; J. -B. Salmon; M. Joanicot

2007-04-04T23:59:59.000Z

428

Implementation for simplifying Bluetooth device connection methods  

E-Print Network [OSTI]

This thesis provides a way for users to easily add and remove devices to secure groups, allowing for a more intuitive way of making connections between devices. These groups allow users to seamlessly make connections between ...

Wan, Tehyih Debbie, 1981-

2004-01-01T23:59:59.000Z

429

Rapid prototyping method for a microfluidics device  

E-Print Network [OSTI]

The product design process can be described as a number of steps taken to turn an idea into a reality. One particular design process of creating a microfluidics device was studied and analyzed. A device containing channels ...

Klauber, Kameron L

2012-01-01T23:59:59.000Z

430

Acoustic enhancement for photo detecting devices  

DOE Patents [OSTI]

Provided are improvements to photo detecting devices and methods for enhancing the sensitivity of photo detecting devices. A photo detecting device generates an electronic signal in response to a received light pulse. An electro-mechanical acoustic resonator, electrically coupled to the photo detecting device, damps the electronic signal and increases the signal noise ratio (SNR) of the electronic signal. Increased photo detector standoff distances and sensitivities will result.

Thundat, Thomas G; Senesac, Lawrence R; Van Neste, Charles W

2013-02-19T23:59:59.000Z

431

V-035: Google Chrome Multiple Flaws Let Remote Users Execute...  

Broader source: Energy.gov (indexed) [DOE]

read may occur in Skia CVE-2012-5130. A memory corruption error may occur in the Apple OSX driver for Intel GPUs CVE-2012-5131. A browser crash may occur when processing...

432

Multi-reflective acoustic wave device  

DOE Patents [OSTI]

An acoustic wave device, which utilizes multiple localized reflections of acoustic wave for achieving an infinite impulse response while maintaining high tolerance for dampening effects, is disclosed. The device utilized a plurality of electromechanically significant electrodes disposed on most of the active surface. A plurality of sensors utilizing the disclosed acoustic wave mode device are also described.

Andle, Jeffrey C.

2006-02-21T23:59:59.000Z

433

Technische Universiteit Eindhoven Opto-Electronic Devices  

E-Print Network [OSTI]

in micro­ and optoelectronic devices. TUHH Heinrich Voss Iterative projection methods New Orleans 2005 4 and their potential for applications in micro­ and optoelectronic devices. In such nanostructures, the free carriers of their special physical properties and their potential for applications in micro­ and optoelectronic devices

Lipari, Giuseppe

434

Student Mobile Device Survey Table of Contents  

E-Print Network [OSTI]

CiCS. Student Mobile Device Survey 2011 Table of Contents Section Number Subject Page 1 With little information and supporting evidence on student ownership and usage of mobile devices at the University of Sheffield, making decisions on our services and support for mobile devices has been based

Martin, Stephen John

435

Portable control device for networked mobile robots  

DOE Patents [OSTI]

A handheld control device provides a way for controlling one or multiple mobile robotic vehicles by incorporating a handheld computer with a radio board. The device and software use a personal data organizer as the handheld computer with an additional microprocessor and communication device on a radio board for use in controlling one robot or multiple networked robots.

Feddema, John T. (Albuquerque, NM); Byrne, Raymond H. (Albuquerque, NM); Bryan, Jon R. (Edgewood, NM); Harrington, John J. (Albuquerque, NM); Gladwell, T. Scott (Albuquerque, NM)

2002-01-01T23:59:59.000Z

436

Sensor device and methods for using same  

DOE Patents [OSTI]

A sensor device and method of employment is provided. More specifically, a sensor device adapted to detect, identify and/or measure a chemical and/or physical characteristic upon placement of the device into an environment, especially a liquid medium for which monitoring is sought is provided.

Rothgeb, Timothy Michael; Gansle, Kristina Marie; Joyce, Jonathan Livingsto; Jordan, James Madison; Rohwer, Tedd Addison; Lockhart, Randal Ray; Smith, Christopher Lawrence; Trinh, Toan; Cipollone, Mark Gary

2005-10-25T23:59:59.000Z

437

Organic electrophosphorescence device having interfacial layers  

SciTech Connect (OSTI)

Techniques are described for forming an organic light emitting diode device with improved device efficiency. Materials having at least one energy level that is similar to those of a phosphorescent light emitting material in the diode are incorporated into the device to directly inject holes or electrons to the light emitting material.

Choulis, Stelios A. (San Jose, CA); Mathai, Mathew (Santa Clara, CA); Choong, Vi-En (San Jose, CA); So, Franky (Gainesville, FL)

2010-08-10T23:59:59.000Z

438

Device Selection by a Personal Proxy Agent  

E-Print Network [OSTI]

Device Selection by a Personal Proxy Agent N. Hadibi, K. El-khatib, Eric Z. Zhang, Ken Chan, G. v user to access communication devices currently present in his Personal Area Network (PAN) Performs PreferencesDevice Capability An example Scenario: Connecting Alice and Bob w/o a Personal Proxy Internet Home

von Bochmann, Gregor

439

The Simplicity Device: Your Personal Mobile Representative  

E-Print Network [OSTI]

The Simplicity Device: Your Personal Mobile Representative Giovanni Bartolomeo1, Francesca Martire1 mobile phone that stores and handles personal information about the user. The Simplicity Device can be connected (e.g. via Bluetooth) to several other devices thus allowing personalization of services

440

SECURITY FOR WIRELESS NETWORKS AND DEVICES  

E-Print Network [OSTI]

connections. Users of handheld devices such as personal digital assis tants (PDAs) and cell phones can synMarch 2003 SECURITY FOR WIRELESS NETWORKS AND DEVICES Shirley Radack, Editor, Computer Security organizations and users have found that wireless communications and devices are convenient, flexible, and easy

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Manual authentication for wireless devices Christian Gehrmann  

E-Print Network [OSTI]

is to examine how these services might best be achieved for personal wireless-enabled devices. Using the terminology of Stajano [12], the problem is that of securely `imprinting' a personal device. That is, suppose a user has two wireless-enabled devices, e.g. a mobile phone and a Personal Digital Assistant (PDA

Mitchell, Chris

442

Read-Copy Update Paul E. McKenney  

E-Print Network [OSTI]

Read-Copy Update Paul E. McKenney Linux Technology Center IBM Beaverton pmckenne@us.ibm.com, http perform ex- pensive synchronization operations in common code #12;Client 1 Module Client 2 - - w Operation was unloaded, is not subject to this race condition. This suggests Client 1 Module Client 2 - - Grace Period w

Arpaci, Remzi

443

Urban Pollution Control Strategies Reading: pages 422-437  

E-Print Network [OSTI]

ATOC 3500 Urban Pollution Control Strategies Reading: pages 422-437 Details to come #12;#12;Urban Pollution Control Strategies What we know so far: · Different regions have different issues, but two types, warm, NOx, HCs, ozone, CO) · Pollution is made worse by meteorological conditions called "inversions

Toohey, Darin W.

444

Functional Genomics: It's All How You Read It  

E-Print Network [OSTI]

Functional Genomics: It's All How You Read It Philip Hieter and Mark Boguski "Functional genomics to functional genomics? An informal poll of colleagues indicates that the term is widely used, but has many genomics websites that have sprung up over the last 12 months clearly demonstrates that interpretations

Boguski, Mark S.

445

Unlocking Short Read Sequencing for Metagenomics Sebastien Rodrigue.  

E-Print Network [OSTI]

and computational pipeline yielding millions of reads that can exceed 200 bp with quality scores approaching that of traditional Sanger sequencing. The method combines an automatable gel-less library construction step (FQRNT) (www.fqrnt.gouv.qc.ca). The funders had no role in study design, data collection and analysis

Entekhabi, Dara

446

Wood Products Identification by Internal Characteristics Readings C. FUENTEALBA1  

E-Print Network [OSTI]

Wood Products Identification by Internal Characteristics Readings C. FUENTEALBA1 , C. SIMON2 , D.fuentealba@cran.uhp-nancy.fr 5 LERMAB - Wood Research Laboratory, Epinal, France, e-mail: daniel- proving control of production tools and reacting to their defi- ciencies. For wood industries

Boyer, Edmond

447

Research & Enterprise University of Reading, Whiteknights, Reading, RG6 6AH Tel: +44 (0)118 378 8978 Email: d.j.gillham@reading.ac.uk www.reading.ac.uk/working-with-business  

E-Print Network [OSTI]

'. · As a start-up business Assuria required a flexible tenancy agreement. · The Science and Technology Centre of the leasing terms as well as interaction with both other SMEs and students. Assuria Ltd is a UK based and Technology Centre (STC), still within the University of Reading campus. The interaction and shared sense

Reading, University of

448

Energy From the Sun ( Rookie Read About Science)  

E-Print Network [OSTI]

Energy From the Sun ( Rookie Read About Science) By Alan Fowler Age Range: 5 and up Grade Level Series: Green Power Hardcover: 64 pages Bibliography Solar Power (Energy for Today) Age Range: 7 and up Grade Level: 2 and up Series: Energy for Today Paperback: 24 pages Done In The Sun Anne Hillerman Age

Ohta, Shigemi

449

The Cultural Power of Law? Conjunctive Readings Bill Maurer  

E-Print Network [OSTI]

The Cultural Power of Law? Conjunctive Readings Bill Maurer Sally Merry's (1999) Colonizing Hawai'i: The Cultural Power of Law provides a compelling account of the cultural transformation of the Kingdom of Hawaii: Adulterers had the ``choice'' to work off their sentences by building roads for the chiefs. And people deemed

Brody, James P.

450

Optical fuel pin scanner. [Patent application; for reading identifications  

DOE Patents [OSTI]

This patent relates to an optical identification system developed for post-irradiation disassembly and analysis of fuel bundle assemblies. The apparatus is designed to be lowered onto a stationary fuel pin to read identification numbers or letters imprinted on the circumference of the top fuel pin and cap. (DLC)

Kirchner, T.L.; Powers, H.G.

1980-12-09T23:59:59.000Z

451

Updating a Biomedical Database Writing, Reading and Invisible Contribution*  

E-Print Network [OSTI]

Updating a Biomedical Database Writing, Reading and Invisible Contribution* David PONTILLE chargé part of biomedical research (Bowker 2000; Hine 2006). As a result of developments in molecular biology project on several biomedical databases in France and the issues involved in different forms

Paris-Sud XI, Université de

452

Remote-handled transuranic waste study  

SciTech Connect (OSTI)

The Waste Isolation Pilot Plant (WIPP) was developed by the US Department of Energy (DOE) as a research and development facility to demonstrate the safe disposal of transuranic (TRU) radioactive wastes generated from the Nation`s defense activities. The WIPP disposal inventory will include up to 250,000 cubic feet of TRU wastes classified as remote handled (RH). The remaining inventory will include contact-handled (CH) TRU wastes, which characteristically have less specific activity (radioactivity per unit volume) than the RH-TRU wastes. The WIPP Land Withdrawal Act (LWA), Public Law 102-579, requires a study of the effect of RH-TRU waste on long-term performance. This RH-TRU Waste Study has been conducted to satisfy the requirements defined by the LWA and is considered by the DOE to be a prudent exercise in the compliance certification process of the WIPP repository. The objectives of this study include: conducting an evaluation of the impacts of RH-TRU wastes on the performance assessment (PA) of the repository to determine the effects of Rh-TRU waste as a part of the total WIPP disposal inventory; and conducting a comparison of CH-TRU and RH-TRU wastes to assess the differences and similarities for such issues as gas generation, flammability and explosiveness, solubility, and brine and geochemical interactions. This study was conducted using the data, models, computer codes, and information generated in support of long-term compliance programs, including the WIPP PA. The study is limited in scope to post-closure repository performance and includes an analysis of the issues associated with RH-TRU wastes subsequent to emplacement of these wastes at WIPP in consideration of the current baseline design. 41 refs.

NONE

1995-10-01T23:59:59.000Z

453

Design and Analysis of a Region-Wide Remotely Controllable Electrical Lock-Out System  

SciTech Connect (OSTI)

Electric utilities have a main responsibility to protect the lives and safety of their workers when they are working on low-, medium-, and high-voltage power lines and distribution circuits. With the anticipated widespread deployment of smart grids, a secure and highly reliable means of maintaining isolation of customer-owned distributed generation (DG) from the affected distribution circuits during maintenance is necessary to provide a fully de-energized work area, ensure utility personnel safety, and prevent hazards that can lead to accidents such as accidental electrocution from unanticipated power sources. Some circuits are serviced while energized (live line work) while others are de-energized for maintenance. For servicing de-energized circuits and equipment, lock-out tag-out (LOTO) programs provide a verifiable procedure for ensuring that circuit breakers are locked in the off state and tagged to indicate that status to operational personnel so that the lines will be checked for voltage to verify they are de-energized. The de-energized area is isolated from any energized sources, which traditionally are the substations. This procedure works well when all power sources and their interconnections are known armed with this knowledge, utility personnel can determine the appropriate circuits to de-energize for isolating the target line or equipment. However, with customer-owned DG tied into the grid, the risk of inadvertently reenergizing a circuit increases because circuit connections may not be adequately documented and are not under the direct control of the local utility. Thus, the active device may not be properly de-energized or isolated from the work area. Further, a remote means of de-energizing and locking out energized devices provides an opportunity for greatly reduced safety risk to utility personnel compared to manual operations. In this paper, we present a remotely controllable LOTO system that allows individual workers to determine the configuration and status of electrical system circuits and permit them to lock out customer-owned DG devices for safety purposes using a highly secure and ultra-reliable radio signal. The system consists of: (1) individual personal lockout devices, (2) lockout communications and logic module at circuit breakers, which are located at all DG devices, and (3) a database and configuration control process located at the utility operations center. The lockout system is a close permissive, i.e., loss of control power or communications will cause the circuit breaker to open. Once the DG device is tripped open, a visual means will provide confirmation of a loss of voltage and current that verifies the disconnected status of the DG. Further the utility personnel will be able to place their own lock electronically on the system to ensure a lockout functionally. The proposed LOTO system provides enhanced worker safety and protection against unintended energized lines when DG is present. The main approaches and challenges encountered through designing the proposed region-wide LOTO system are discussed in this paper. These approaches include: (1) evaluating the reliability of the proposed approach under N-modular redundancy with voter/spares configurations and (2) conducting a system level risk assessment study using the failure modes and effects analysis (FMEA) technique to identify and rank failure modes by probability of occurrence, probability of detection, and severity of consequences. This ranking allows a cost benefits analysis to be conducted such that dollars and efforts will be applied to the failures that provide greatest incremental gains in system capability (resilience, survivability, security, reliability, availability, etc.) per dollar spent whether capital, operations, or investment. Several simulation scenarios and their results are presented to demonstrate the viability of these approaches.

Olama, Mohammed M [ORNL; Allgood, Glenn O [ORNL; Kuruganti, Phani Teja [ORNL; Howlader, Mostofa [ORNL; Kisner, Roger A [ORNL; Ewing, Paul D [ORNL; McIntyre, Timothy J [ORNL

2012-01-01T23:59:59.000Z

454

Remote sensing for wind power potential: a prospector's handbook  

SciTech Connect (OSTI)

Remote sensing can aid in identifying and locating indicators of wind power potential from the terrestrial, marine, and atmospheric environments (i.e.: wind-deformed trees, white caps, and areas of thermal flux). It is not considered as a tool for determining wind power potential. A wide variety of remotely sensed evidence is described in terms of the scale at which evidence of wind power can be identified, and the appropriate remote sensors for finding such evidence. Remote sensing can be used for regional area prospecting using small-scale imagery. The information from such small-scale imagery is most often qualitative, and if it is transitory, examination of a number of images to verify presistence of the feature may be required. However, this evidence will allow rapid screening of a large area. Medium-scale imagery provides a better picture of the evidence obtained from small-scale imagery. At this level it is best to use existing imagery. Criteria relating to land use, accessibility, and proximity of candidate sites to nearby transmission lines can also be effectively evaluated from medium-scale imagery. Large-scale imagery provides the most quantitative evidence of the strength of wind. Wind-deformed trees can be identified at a large number of sites using only a few hours in locally chartered aircraft. A handheld 35mm camera can adequately document any evidence of wind. Three case studies that employ remote sensing prospecting techniques are described. Based on remotely sensed evidence, the wind power potential in three geographically and climatically diverse areas of the United States is estimated, and the estimates are compared to actual wind data in those regions. In addition, the cost of each survey is discussed. The results indicate that remote sensing for wind power potential is a quick, cost effective, and fairly reliable method for screening large areas for wind power potential.

Wade, J.E.; Maule, P.A.; Bodvarsson, G.; Rosenfeld, C.L.; Woolley, S.G.; McClenahan, M.R.

1983-02-01T23:59:59.000Z

455

Protective laser beam viewing device  

DOE Patents [OSTI]

A protective laser beam viewing system or device including a camera selectively sensitive to laser light wavelengths and a viewing screen receiving images from the laser sensitive camera. According to a preferred embodiment of the invention, the camera is worn on the head of the user or incorporated into a goggle-type viewing display so that it is always aimed at the area of viewing interest to the user and the viewing screen is incorporated into a video display worn as goggles over the eyes of the user.

Neil, George R.; Jordan, Kevin Carl

2012-12-18T23:59:59.000Z

456

Health Sciences Library Resources for Mobile Device Users Wireless Access for Mobile Devices  

E-Print Network [OSTI]

1 Health Sciences Library Resources for Mobile Device Users Wireless Access for Mobile Devices to configure your mobile device; instructions are available at http://www.usask.ca/ict/services/network-services/wireless/index.php - Assistance with accessing University services (such as wireless) on mobile devices is available from the ICT

Peak, Derek

457

Waveguide device and method for making same  

DOE Patents [OSTI]

A monolithic micromachined waveguide device or devices with low-loss, high-power handling, and near-optical frequency ranges is set forth. The waveguide and integrated devices are capable of transmitting near-optical frequencies due to optical-quality sidewall roughness. The device or devices are fabricated in parallel, may be mass produced using a LIGA manufacturing process, and may include a passive component such as a diplexer and/or an active capping layer capable of particularized signal processing of the waveforms propagated by the waveguide.

Forman, Michael A. (San Francisco, CA)

2007-08-14T23:59:59.000Z

458

Electrical device fabrication from nanotube formations  

DOE Patents [OSTI]

A method for forming nanotube electrical devices, arrays of nanotube electrical devices, and device structures and arrays of device structures formed by the methods. Various methods of the present invention allow creation of semiconducting and/or conducting devices from readily grown SWNT carpets rather than requiring the preparation of a patterned growth channel and takes advantage of the self-controlling nature of these carpet heights to ensure a known and controlled channel length for reliable electronic properties as compared to the prior methods.

Nicholas, Nolan Walker; Kittrell, W. Carter; Kim, Myung Jong; Schmidt, Howard K.

2013-03-12T23:59:59.000Z

459

Fabrication and Characterization of Organic/Inorganic Photovoltaic Devices  

E-Print Network [OSTI]

J. W. Yu, Organic photovoltaic devices with a crosslinkablein Nanostructured Photovoltaic Devices, Recent Patents oninterfaces in organic photovoltaic devices, Solar Energy

Guvenc, Ali Bilge

2012-01-01T23:59:59.000Z

460

Pipe weld crown removal device  

DOE Patents [OSTI]

A device is provided for grinding down the crown of a pipe weld joining aligned pipe sections so that the weld is substantially flush with the pipe sections joined by the weld. The device includes a cage assembly comprising a pair of spaced cage rings adapted to be mounted for rotation on the respective pipe sections on opposite sides of the weld, a plurality of grinding wheels, supported by the cage assembly for grinding down the crown of the weld, and a plurality of support shafts, each extending longitudinally along the joined pipe sections, parallel thereto, for individually mounting respective grinding wheels. Each end of the support shafts is mounted for rotation in a bearing assembly housed within a radially directed opening in a corresponding one of the cage rings so as to provide radial movement of the associated shaft, and thus of the associated grinding wheel, towards and away from the weld. A first drive sprocket provides rotation of the cage assembly around the pipe sections while a second drive unit, driven by a common motor, provides rotation of the grinding wheels.

Sword, Charles K. (Pleasant Hills, PA); Sette, Primo J. (West Newton, PA)

1992-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Passive fault current limiting device  

DOE Patents [OSTI]

A passive current limiting device and isolator is particularly adapted for use at high power levels for limiting excessive currents in a circuit in a fault condition such as an electrical short. The current limiting device comprises a magnetic core wound with two magnetically opposed, parallel connected coils of copper, a high temperature superconductor or other electrically conducting material, and a fault element connected in series with one of the coils. Under normal operating conditions, the magnetic flux density produced by the two coils cancel each other. Under a fault condition, the fault element is triggered to cause an imbalance in the magnetic flux density between the two coils which results in an increase in the impedance in the coils. While the fault element may be a separate current limiter, switch, fuse, bimetal strip or the like, it preferably is a superconductor current limiter conducting one-half of the current load compared to the same limiter wired to carry the total current of the circuit. The major voltage during a fault condition is in the coils wound on the common core in a preferred embodiment. 6 figs.

Evans, D.J.; Cha, Y.S.

1999-04-06T23:59:59.000Z

462

Infrared emitting device and method  

DOE Patents [OSTI]

The infrared emitting device comprises a III-V compound semiconductor substrate upon which are grown a quantum-well active region having a plurality of quantum-well layers formed of a ternary alloy comprising InAsSb sandwiched between barrier layers formed of a ternary alloy having a smaller lattice constant and a larger energy bandgap than the quantum-well layers. The quantum-well layers are preferably compressively strained to increase the threshold energy for Auger recombination; and a method is provided for determining the preferred thickness for the quantum-well layers. Embodiments of the present invention are described having at least one cladding layer to increase the optical and carrier confinement in the active region, and to provide for waveguiding of the light generated within the active region. Examples have been set forth showing embodiments of the present invention as surface- and edge-emitting light emitting diodes (LEDs), an optically-pumped semiconductor laser, and an electrically-injected semiconductor diode laser. The light emission from each of the infrared emitting devices of the present invention is in the midwave infrared region of the spectrum from about 2 to 6 microns. 8 figs.

Kurtz, S.R.; Biefeld, R.M.; Dawson, L.R.; Howard, A.J.; Baucom, K.C.

1997-04-29T23:59:59.000Z

463

An fMRI study of multimodal semantic and phonological processing in reading disabled adolescents  

E-Print Network [OSTI]

2009 /Accepted: 11 September 2009 # The International Dyslexia Association 2009 Abstract Using Dyslexia . fMRI . Performance . Phonology. Reading disability. Semantics Introduction The neurobiology of reading disability An increasing body of research suggests that the core deficit in developmental dyslexia

464

Eye movements of young and older adults while reading with distraction  

E-Print Network [OSTI]

The authors used eye-tracking technology to examine young and older adults' online performance in the reading in distraction paradigm. Participants read target sentences and answered comprehension questions following each sentence. In some sentences...

Kemper, Susan; McDowd, Joan; Kramer, Arthur F.

2006-03-01T23:59:59.000Z

465

Remote-Handled Transuranic Content Codes  

SciTech Connect (OSTI)

The Remote-Handled Transuranic (RH-TRU) Content Codes (RH-TRUCON) document representsthe development of a uniform content code system for RH-TRU waste to be transported in the 72-Bcask. It will be used to convert existing waste form numbers, content codes, and site-specificidentification codes into a system that is uniform across the U.S. Department of Energy (DOE) sites.The existing waste codes at the sites can be grouped under uniform content codes without any lossof waste characterization information. The RH-TRUCON document provides an all-encompassing|description for each content code and compiles this information for all DOE sites. Compliance withwaste generation, processing, and certification procedures at the sites (outlined in this document foreach content code) ensures that prohibited waste forms are not present in the waste. The contentcode gives an overall description of the RH-TRU waste material in terms of processes and|packaging, as well as the generation location. This helps to provide cradle-to-grave traceability ofthe waste material so that the various actions required to assess its qualification as payload for the72-B cask can be performed. The content codes also impose restrictions and requirements on themanner in which a payload can be assembled.The RH-TRU Waste Authorized Methods for Payload Control (RH-TRAMPAC), Appendix 1.3.7of the 72-B Cask Safety Analysis Report (SAR), describes the current governing procedures|applicable for the qualification of waste as payload for the 72-B cask. The logic for this|classification is presented in the 72-B Cask SAR. Together, these documents (RH-TRUCON,|RH-TRAMPAC, and relevant sections of the 72-B Cask SAR) present the foundation and|justification for classifying RH-TRU waste into content codes. Only content codes described in thisdocument can be considered for transport in the 72-B cask. Revisions to this document will be madeas additional waste qualifies for transport. |Each content code uniquely identifies the generated waste and provides a system for tracking theprocess and packaging history. Each content code begins with a two-letter site abbreviation thatindicates the shipper of the RH-TRU waste. The site-specific letter designations for each of the|DOE sites are provided in Table 1. Not all of the sites listed in Table 1 have generated/stored RH-|TRU waste.

Washington TRU Solutions

2001-08-01T23:59:59.000Z

466

Students' Perceived and Actual Use of Strategies for Reading and Writing  

E-Print Network [OSTI]

utility of summarizing were even narrower. He associated summarizing with only reading-related writing assignments, listing

Yoo, Monica

2010-01-01T23:59:59.000Z

467

Maize Transformation -The First Papers to Copy and Read *Absolutely Essential  

E-Print Network [OSTI]

to protocol; Essential reading Armstrong, C.L., Green, C.E. and Phillips, R.L. (1991) DevelopmentMaize Transformation - The First Papers to Copy and Read *Absolutely Essential *Armstrong, C. Essential reading; how `HiII' line was derived. Armstrong, C.L. and Green, C.E. (1985) Establishment

Raizada, Manish N.

468

Electro-optic component mounting device  

DOE Patents [OSTI]

A technique is provided for integrally mounting a device such as an electro-optic device (50) in a transmission line to avoid series resonant effects. A center conductor (52) of the transmission line has an aperture (58) formed therein for receiving the device (50). The aperture (58) splits the center conductor into two parallel sections on opposite sides of the device. For a waveguide application, the center conductor is surrounded by a conductive ground surface (54), which is spaced apart from the center conductor with a dielectric material (56). One set of electrodes formed on the surface of the electro-optic device (50) is directly connected to the center conductor 52 and an electrode formed on the surface of the electro-optic device is directly connected to the conductive ground surface (54). The electrodes formed on the surface of the electro-optic device are formed on curved sections of the surface of the device to mate with correspondingly shaped electrodes on the conductor and ground surface to provide a uniform electric field across the electro-optic device. The center conductor includes a passage ( 60) formed therein for passage of optical signals to an electro-optic device.

Gruchalla, Michael E. (Albuquerque, NM)

1994-01-01T23:59:59.000Z

469

Electro-optic component mounting device  

DOE Patents [OSTI]

A technique is provided for integrally mounting a device such as an electro-optic device in a transmission line to avoid series resonant effects. A center conductor of the transmission line has an aperture formed therein for receiving the device. The aperture splits the center conductor into two parallel sections on opposite sides of the device. For a waveguide application, the center conductor is surrounded by a conductive ground surface which is spaced apart from the center conductor with a dielectric material. One set of electrodes formed on the surface of the electro-optic device is directly connected to the center conductor and an electrode formed on the surface of the electro-optic device is directly connected to the conductive ground surface. The electrodes formed on the surface of the electro-optic device are formed on curved sections of the surface of the device to mate with correspondingly shaped electrodes on the conductor and ground surface to provide a uniform electric field across the electro-optic device. The center conductor includes a passage formed therein for passage of optical signals to an electro-optic device. 10 figs.

Gruchalla, M.E.

1994-09-13T23:59:59.000Z

470

Pre-conceptual Design Assessment of DEMO Remote Maintenance  

E-Print Network [OSTI]

EDFA, as part of the Power Plant Physics and Technology programme, has been working on the pre-conceptual design of a Demonstration Power Plant (DEMO). As part of this programme, a review of the remote maintenance strategy considered maintenance solutions compatible with expected environmental conditions, whilst showing potential for meeting the plant availability targets. A key finding was that, for practical purposes, the expected radiation levels prohibit the use of complex remote handling operations to replace the first wall. In 2012/13, these remote maintenance activities were further extended, providing an insight into the requirements, constraints and challenges. In particular, the assessment of blanket and divertor maintenance, in light of the expected radiation conditions and availability, has elaborated the need for a very different approach from that of ITER. This activity has produced some very informative virtual reality simulations of the blanket segments and pipe removal that are exceptionally ...

Loving, A; Sykes, N; Iglesias, D; Coleman, M; Thomas, J; Harman, J; Fischer, U; Sanz, J; Siuko, M; Mittwollen, M; others,

2013-01-01T23:59:59.000Z

471

1999 IEEE international geoscience and remote sensing symposium  

SciTech Connect (OSTI)

The theme of IGARSS'99, ``Remote Sensing of the System Earth--A Challenge for the 21st Century,'' shows how earth observation based on satellite remote sensing can significantly contribute to the future study of the environment and the changes it is undergoing, whether from natural causes or human activities. The wide range of topics offers an interdisciplinary approach and suggests integrated techniques and theory in remote sensing are essential for modeling and understanding the environment. Topics covered include: new instrumentation and future systems; high resolution SAR/InSAR; earth system science educational initiative; data fusion; radar sensing of ice sheets; image processing techniques; clouds and ice particles; internal waves; natural hazards and disaster monitoring; advanced passive and active sensors and sensor calibration; radar assessment of rain, oil spills and natural slicks; data standards and distribution; and vegetation monitoring using BRDF approaches.

NONE

1999-07-01T23:59:59.000Z

472

Remote-Handled Low Level Waste Disposal Project Alternatives Analysis  

SciTech Connect (OSTI)

This report identifies, evaluates, and compares alternatives for meeting the U.S. Department of Energys mission need for management of remote-handled low-level waste generated by the Idaho National Laboratory and its tenants. Each alternative identified in the Mission Need Statement for the Remote-Handled Low-Level Waste Treatment Project is described and evaluated for capability to fulfill the mission need. Alternatives that could meet the mission need are further evaluated and compared using criteria of cost, risk, complexity, stakeholder values, and regulatory compliance. The alternative for disposal of remote-handled low-level waste that has the highest confidence of meeting the mission need and represents best value to the government is to build a new disposal facility at the Idaho National Laboratory Site.

David Duncan

2010-10-01T23:59:59.000Z

473

Haptic device for telerobotic surgery  

DOE Patents [OSTI]

A haptic device for telerobotic surgery, including a base; a linkage system having first and second linkage members coupled to the base; a motor that provides a motor force; a transmission including first and second driving pulleys arranged such that their faces form an angle and their axes form a plane, first and second idler pulleys offset from the plane and arranged between the first and second driving pulleys such that their axes divide the angle between the first and second driving pulleys, and a cable that traverses the first and second driving pulleys and the set of idler pulleys and transfers the motor force to the linkage system; an end effector coupled to distal ends of the first and second linkage members and maneuverable relative to the base; and a controller that modulates the motor force to simulate a body part at a point portion of the end effector.

Salisbury, Curt; Salisbury, Jr., J. Kenneth

2014-12-30T23:59:59.000Z

474

Seal device for ferromagnetic containers  

DOE Patents [OSTI]

A temporary seal or patch assembly prevents the escape of contents, e.g., fluids and the like, from within a container having a breach therethrough until the contents can be removed and/or a repair effected. A frame that supports a sealing bladder can be positioned over the breach and the frame is then attached to the container surface, which must be of a ferromagnet material, by using switchable permanent magnets. The permanent magnets are designed to have a first condition that is not attracted to the ferromagnetic surface and a second conditions whereby the magnets are attracted to the surface with sufficient force to support the seal assembly on the surface. Latching devices may be attached to the frame and engage the container surface with hardened pins to prevent the lateral movement of the seal assembly along the container surface from external forces such as fluid drag or gravity.

Meyer, Ross E. (Los Alamos, NM); Jason, Andrew J. (Los Alamos, NM)

1994-01-01T23:59:59.000Z

475

Heating device for semiconductor wafers  

DOE Patents [OSTI]

An apparatus for heat treating semiconductor wafers is disclosed. The apparatus includes a heating device which contains an assembly of light energy sources for emitting light energy onto a wafer. In particular, the light energy sources are positioned such that many different radial heating zones are created on a wafer being heated. For instance, in one embodiment, the light energy sources form a spiral configuration. In an alternative embodiment, the light energy sources appear to be randomly dispersed with respect to each other so that no discernable pattern is present. In a third alternative embodiment of the present invention, the light energy sources form concentric rings. Tuning light sources are then placed in between the concentric rings of light.

Vosen, Steven R. (Berkeley, CA)

1999-01-01T23:59:59.000Z

476

Heating device for semiconductor wafers  

DOE Patents [OSTI]

An apparatus for heat treating semiconductor wafers is disclosed. The apparatus includes a heating device which contains an assembly of light energy sources for emitting light energy onto a wafer. In particular, the light energy sources are positioned such that many different radial heating zones are created on a wafer being heated. For instance, in one embodiment, the light energy sources form a spiral configuration. In an alternative embodiment, the light energy sources appear to be randomly dispersed with respect to each other so that no discernible pattern is present. In a third alternative embodiment of the present invention, the light energy sources form concentric rings. Tuning light sources are then placed in between the concentric rings of light. 4 figs.

Vosen, S.R.

1999-07-27T23:59:59.000Z

477

Cryogenic vacuumm RF feedthrough device  

DOE Patents [OSTI]

A cryogenic vacuum rf feedthrough device comprising: 1) a probe for insertion into a particle beam; 2) a coaxial cable comprising an inner conductor and an outer conductor, a dielectric/insulating layer surrounding the inner conductor, the latter being connected to the probe for the transmission of higher mode rf energy from the probe; and 3) a high thermal conductivity stub attached to the coaxial dielectric about and in thermal contact with the inner conductor which high thermal conductivity stub transmits heat generated in the vicinity of the probe efficiently and radially from the area of the probe and inner conductor all while maintaining useful rf transmission line characteristics between the inner and outer coaxial conductors.

Wu, Genfa (Yorktown, VA); Phillips, Harry Lawrence (Hayes, VA)

2008-12-30T23:59:59.000Z

478

Seal device for ferromagnetic containers  

DOE Patents [OSTI]

A temporary seal or patch assembly prevents the escape of contents, e.g., fluids and the like, from within a container having a breach there through until the contents can be removed and/or a repair effected. A frame that supports a sealing bladder can be positioned over the breach and the frame is then attached to the container surface, which must be of a ferromagnet material, by using switchable permanent magnets. The permanent magnets are designed to have a first condition that is not attracted to the ferromagnetic surface and a second conditions whereby the magnets are attracted to the surface with sufficient force to support the seal assembly on the surface. Latching devices may be attached to the frame and engage the container surface with hardened pins to prevent the lateral movement of the seal assembly along the container surface from external forces such as fluid drag or gravity. 10 figs.

Meyer, R.E.; Jason, A.J.

1994-10-18T23:59:59.000Z

479

MIDAS: Multi-device Integrated Dynamic Activity Spaces  

E-Print Network [OSTI]

of this device multiplicity and support information access from single devices only. Changing devices means restarting an information session. Using devices in conjunction with each other poses several challenges, which include the presentation of content...

Karadkar, Unmil Purushottam

2012-02-14T23:59:59.000Z

480

A Brief Survey of Physical Activity Monitoring Devices1  

E-Print Network [OSTI]

on their mechanisms, measurements, product forms, and data portability. and 3) the role of personal devices both conventional standalone pedometer devices and personal digital devices integrated A Brief Survey of Physical Activity Monitoring Devices1 Technical Report MPCL-08

Helal, Abdelsalam

Note: This page contains sample records for the topic "remote read device" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Application and Removal of Strippable Coatings via Remote Platform - 13133  

SciTech Connect (OSTI)

Florida International University's (FIU's) Applied Research Center is currently supporting the Department of Energy (DOE) Environmental Management Office of D and D and Facility Engineering program. FIU is supporting DOE's initiative to improve safety, reduce technical risks, and limit uncertainty within D and D operations by identifying technologies suitable to meet specific facility D and D requirements, assessing the readiness of those technologies for field deployment, and conducting feasibility studies and technology demonstrations of selected technologies and working with technology vendors to optimize the design of their current technologies to accomplish dangerous and demanding tasks during D and D operations. To meet one identified technology gap challenge for a technology to remotely apply strippable coatings, fixatives and decontamination gels, FIU identified and performed an initial demonstration of an innovative remote fixative sprayer platform from International Climbing Machines (ICM). The selected technology was demonstrated spraying fixative products at the hot cell mockup facility at the Applied Research Center at FIU in November 2008 under cold (non-radioactive) conditions. The remotely controlled platform was remotely operated and entered the facility and sprayed a fixative onto horizontal and vertical surfaces. Based on the initial FIU demonstration and the specific technical requirements identified at the DOE facilities, a follow-up demonstration was expanded to include strippable coatings and a decontamination gel, which was demonstrated in June 2010 at the ICM facility in Ithaca, NY. This second technology evaluation documented the ability of the remote system to spray the selected products on vertical stainless steel and concrete surfaces to a height of 3 meters (10 feet) and to achieve sufficient coverage and product thickness to promote the ability to peel/remove the strippable coatings and decontamination gel. The next challenge was to determine if a remote platform could be used to remove the strippable coatings and decontamination gels. In 2012, FIU worked with the technology provider, ICM, to conduct feasibility and trade studies to identify the requirements for the remote removal of strippable coatings or decontamination gels using the existing remote controlled platform. (authors)

Shoffner, P.; Lagos, L. [Applied Research Center, Florida International University, 10555 West Flagler Street, Suite 2100, Miami, FL 33174 (United States)] [Applied Research Center, Florida International University, 10555 West Flagler Street, Suite 2100, Miami, FL 33174 (United States); Maggio, S. [International Climbing Machine, 630 Elmira Road, Ithaca, NY 14850 (United States)] [International Climbing Machine, 630 Elmira Road, Ithaca, NY 14850 (United States)

2013-07-01T23:59:59.000Z

482

Acceptable Information Technology Devices | Y-12 National Security...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

without limitation, cellular telephones, smart phones, personal digital assistants, personal electronic devices, pagers, and flash memory storage devices. Examples include...

483

Dynamic Analysis of Mobile Device Applications  

SciTech Connect (OSTI)

The On-Device Dynamic Analysis of Mobile Applications (ODAMA) project was started in an effort to protect mobile devices used in Industrial Control Systems (ICS) from cyber attack. Because mobile devices hide as much of the computer as possible, the users ability to assess the software running on their system is limited. The research team chose Googles Android platform for this initial research because it is open source and it would give us freedom in our approach, including the ability to modify the mobile devices operating system itself. The research team concluded that a Privileged Application was the right approach, and the result was ODAMA. This project is an important piece of the work to secure the expanding use of mobile devices with our nations critical infrastructure.

Corey Thuen

2013-01-01T23:59:59.000Z

484

Apparatuses and methods for laser reading of thermoluminescent phosphors  

DOE Patents [OSTI]

Apparatuses and methods for rapidly reading thermoluminescent phosphors to determine the amount of luminescent energy stored therein. The stored luminescent energy is interpreted as a measure of the total exposure of the thermoluminescent phosphor to ionizing radiation. The thermoluminescent phosphor reading apparatus uses a laser to generate a laser beam. The laser beam power level is monitored by a laser power detector and controlled to maintain the power level at a desired value or values which can vary with time. A shutter or other laser beam interrupting means is used to control exposure of the thermoluminescent phosphor to the laser beam. The laser beam can be equalized using an opitcal equalizer so that the laser beam has an approximately uniform power density across the beam. The heated thermoluminescent phosphor emits a visible or otherwise detectable luminescent emission which is measured as an indication of the radiation exposure of the thermoluminscent phosphors. Also disclosed are preferred signal processing and control circuits including one system using a digital computer. Also disclosed are time-profiled laser power cycles for pre-anneal, read and post-anneal treatment of phosphors.

Braunlich, Peter F. (SW. 730 City View, Pullman, WA 99163); Tetzlaff, Wolfgang (Pullman, WA)

1989-01-01T23:59:59.000Z

485

Prototype Development of Remote Operated Hot Uniaxial Press (ROHUP) to Fabricate Advanced Tc-99 Bearing Ceramic Waste Forms - 13381  

SciTech Connect (OSTI)

The objective of this senior student project is to design and build a prototype construction of a machine that simultaneously provides the proper pressure and temperature parameters to sinter ceramic powders in-situ to create pellets of rather high densities of above 90% (theoretical). This ROHUP (Remote Operated Hot Uniaxial Press) device is designed specifically to fabricate advanced ceramic Tc-99 bearing waste forms and therefore radiological barriers have been included in the system. The HUP features electronic control and feedback systems to set and monitor pressure, load, and temperature parameters. This device operates wirelessly via portable computer using Bluetooth{sup R} technology. The HUP device is designed to fit in a standard atmosphere controlled glove box to further allow sintering under inert conditions (e.g. under Ar, He, N{sub 2}). This will further allow utilizing this HUP for other potential applications, including radioactive samples, novel ceramic waste forms, advanced oxide fuels, air-sensitive samples, metallic systems, advanced powder metallurgy, diffusion experiments and more. (authors)

Alaniz, Ariana J.; Delgado, Luc R.; Werbick, Brett M. [University of Nevada - Las Vegas, Howard R. Hughes College of Engineering, 4505 S. Maryland Parkway, Box 454009, Las Vegas, NV 89154-4009 (United States)] [University of Nevada - Las Vegas, Howard R. Hughes College of Engineering, 4505 S. Maryland Parkway, Box 454009, Las Vegas, NV 89154-4009 (United States); Hartmann, Thomas [University of Nevada - Las Vegas, Harry Reid Canter, 4505 S. Maryland Parkway, Box 454009, Las Vegas, NV 89154-4009 (United States)] [University of Nevada - Las Vegas, Harry Reid Canter, 4505 S. Maryland Parkway, Box 454009, Las Vegas, NV 89154-4009 (United States)

2013-07-01T23:59:59.000Z

486

Viewing device for electron-beam equipment  

SciTech Connect (OSTI)

Viewing devices are used to observe melting, welding, and so on in vacuum systems, an it is necessary to protect the windows from droplets and vapor. A viewing device for electron-beam equipment is described in which the viewing tube and mounting flange are made as a tubular ball joint enclosed in a steel bellows, which render the viewing device flexible. Bending the viewing tube in the intervals between observations protects the viewing window from sputtering and from drops of molten metal.

Nasyrov, R.S.

1985-06-01T23:59:59.000Z

487

Stable blue phosphorescent organic light emitting devices  

DOE Patents [OSTI]

Novel combination of materials and device architectures for organic light emitting devices is provided. An organic light emitting device, is provided, having an anode, a cathode, and an emissive layer disposed between the anode and the cathode. The emissive layer includes a host and a phosphorescent emissive dopant having a peak emissive wavelength less than 500 nm, and a radiative phosphorescent lifetime less than 1 microsecond. Preferably, the phosphorescent emissive dopant includes a ligand having a carbazole group.

Forrest, Stephen R.; Thompson, Mark; Giebink, Noel

2014-08-26T23:59:59.000Z

488

U-201: HP System Management Homepage Bugs Let Remote Users Deny...  

Broader source: Energy.gov (indexed) [DOE]

01: HP System Management Homepage Bugs Let Remote Users Deny Service U-201: HP System Management Homepage Bugs Let Remote Users Deny Service June 28, 2012 - 7:00am Addthis PROBLEM:...

489

T-647: PHP File Upload Bug May Let Remote Users Overwrite Files...  

Broader source: Energy.gov (indexed) [DOE]

7: PHP File Upload Bug May Let Remote Users Overwrite Files on the Target System T-647: PHP File Upload Bug May Let Remote Users Overwrite Files on the Target System June 15, 2011...

490

Information to iteration : using information and communication technologies [ICT] in design for remote regions  

E-Print Network [OSTI]

Remote design comes with significant challenges. A major barrier to designing in remote regions is the lack of communication between designers and users. As a result, the lack of information flow leads to assumptions about ...

Griffith, Kenfield A. (Kenfield Allistair)

2012-01-01T23:59:59.000Z

491

U-026: Cisco Small Business SRP500 Series Bug Lets Remote Users...  

Broader source: Energy.gov (indexed) [DOE]

Lets Remote Users Inject Commands November 3, 2011 - 8:15am Addthis PROBLEM: Cisco Small Business SRP500 Series Bug Lets Remote Users Inject Commands. PLATFORM: The following...

492

U-239: Apple iPhone SMS Processing Flaw Lets Remote Users Spoof...  

Office of Environmental Management (EM)

URLs T-676: Apple iOS Certificate Chain Validation Flaw Lets Certain Remote Users Access or Modify SSLTLS Sessions U-036: Apple iOS Bugs Let Remote Users Execute Arbitrary Code...

493

V-006: CA ARCserve Backup Flaws Let Remote Users Execute Arbitrary...  

Broader source: Energy.gov (indexed) [DOE]

6: CA ARCserve Backup Flaws Let Remote Users Execute Arbitrary Code and Deny Service V-006: CA ARCserve Backup Flaws Let Remote Users Execute Arbitrary Code and Deny Service...

494

V-166: HP-UX Directory Server Discloses Passwords to Remote Authentica...  

Broader source: Energy.gov (indexed) [DOE]

6: HP-UX Directory Server Discloses Passwords to Remote Authenticated and Local Users V-166: HP-UX Directory Server Discloses Passwords to Remote Authenticated and Local Users May...

495

T-648: Avaya IP Office Manager TFTP Server Lets Remote Users...  

Broader source: Energy.gov (indexed) [DOE]

48: Avaya IP Office Manager TFTP Server Lets Remote Users Traverse the Directory T-648: Avaya IP Office Manager TFTP Server Lets Remote Users Traverse the Directory June 16, 2011 -...

496

V-104: Oracle Java Flaw Lets Remote Users Execute Arbitrary Code...  

Broader source: Energy.gov (indexed) [DOE]

Code V-104: Oracle Java Flaw Lets Remote Users Execute Arbitrary Code March 5, 2013 - 12:53am Addthis PROBLEM: Oracle Java Flaw Lets Remote Users Execute Arbitrary Code...

497

E-Print Network 3.0 - automated remote plant Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Page: << < 1 2 3 4 5 > >> 1 Energy-saving through remote control of a wastewater treatment plant Summary: Energy-saving through remote control of a wastewater treatment plant...

498

U-071:HP Database Archiving Software Bugs Let Remote Users Execute...  

Broader source: Energy.gov (indexed) [DOE]

and File Inclusion Bugs Let Remote Users Potentially Execute Arbitrary Code U-121: Apple iOS Bugs Let Remote Users Execute Arbitrary Code, Conduct Cross-Site Scripting...

499

V-171: Apple Safari Bugs Let Remote Users Execute Arbitrary Code...  

Broader source: Energy.gov (indexed) [DOE]

1: Apple Safari Bugs Let Remote Users Execute Arbitrary Code and Conduct Cross-Site Scripting Attacks V-171: Apple Safari Bugs Let Remote Users Execute Arbitrary Code and Conduct...

500

V-015: Apple iOS Bugs Let Remote Users Execute Arbitrary Code...  

Broader source: Energy.gov (indexed) [DOE]

5: Apple iOS Bugs Let Remote Users Execute Arbitrary Code, Local Users Bypass the Screen Lock, and Applications Obtain Kernel Address Information V-015: Apple iOS Bugs Let Remote...