Sample records for remote fault indicators

  1. Detecting Intrusion Faults in Remotely Controlled Systems Salvatore Candido and Seth Hutchinson

    E-Print Network [OSTI]

    Hutchinson, Seth

    the design process. With this in mind, researchers have begun to address security issues specific to controlDetecting Intrusion Faults in Remotely Controlled Systems Salvatore Candido and Seth Hutchinson to a remote-controlled system (deemed an "intrusion fault" or "intrusion") despite attempts to conceal

  2. Energy analysis of substorms based on remote sensing techniques, solar wind measurements, and geomagnetic indices

    E-Print Network [OSTI]

    Ã?stgaard, Nikolai

    Energy analysis of substorms based on remote sensing techniques, solar wind measurements wind Citation: Ã?stgaard, N., G. Germany, J. Stadsnes, and R. R. Vondrak, Energy analysis of substorms satellite have been used to examine the energy deposition in the Northern Hemisphere by precipitating

  3. Solar system fault detection

    DOE Patents [OSTI]

    Farrington, R.B.; Pruett, J.C. Jr.

    1984-05-14T23:59:59.000Z

    A fault detecting apparatus and method are provided for use with an active solar system. The apparatus provides an indication as to whether one or more predetermined faults have occurred in the solar system. The apparatus includes a plurality of sensors, each sensor being used in determining whether a predetermined condition is present. The outputs of the sensors are combined in a pre-established manner in accordance with the kind of predetermined faults to be detected. Indicators communicate with the outputs generated by combining the sensor outputs to give the user of the solar system and the apparatus an indication as to whether a predetermined fault has occurred. Upon detection and indication of any predetermined fault, the user can take appropriate corrective action so that the overall reliability and efficiency of the active solar system are increased.

  4. Fault interaction near Hollister, California

    SciTech Connect (OSTI)

    Mavko, G.M.

    1982-09-10T23:59:59.000Z

    A numerical model is used to study fault stress slip near Hollister, California. The geometrically complex system of interacting faults, including the San Andreas, Calaveras, Sargent, and Busch faults, is approximated with a two-dimensional distribution of short planar fault segments in an elastic medium. The steady stress and slip rate are simulated by specifying frictional strength and stepping the remote stress ahead in time. The resulting computed fault stress is roughly proportional to the observed spatial density of small earthquakes, suggesting that the distinction between segments characterized by earthquakes and those with aseismic creep results, in part, from geometry. A nonsteady simulation is made by introducing, in addition, stress drops for individual moderate earthquakes. A close fit of observed creep with calculated slip on the Calaveras and San Andreas faults suggests that many changes in creep rate (averaged over several months) are caused by local moderate earthquakes. In particular, a 3-year creep lag preceding the August 6, 1979, Coyote Lake earthquake on the Calaveras fault seems to have been a direct result of the November 28, 1974, Thanksgiving Day earthquake on the Busch fault. Computed lags in slip rate preceding some other moderate earthquakes in the area are also due to earlier earthquakes. Although the response of the upper 1 km of the fault zone may cause some individual creep events and introduce delays in others, the long-term rate appears to reflect deep slip.

  5. 1. Detect ground faults in PV arrays mounted on the roofs of 2. Interrupt the fault current

    E-Print Network [OSTI]

    Johnson, Eric E.

    1. Detect ground faults in PV arrays mounted on the roofs of dwellings 2. Interrupt the fault current 3. Indicate that a ground fault had occurred 4. Disconnect the faulted part of the PV array 5. "Crowbar" (short-circuit) the PV array The original GFPD prototype was developed in two versions that were

  6. Using Reinforcement Learning for Proactive Network Fault Management

    E-Print Network [OSTI]

    Shayman, Mark A.

    fault management demands intelligent man­ agement actions be taken by central manager or remote agents.g., alarms) which appear sequentially. For example, on the manager's side, polling devices randomly (orUsing Reinforcement Learning for Proactive Network Fault Management Qiming He, Mark A. Shayman

  7. Automated Fault Location In Smart Distribution Systems

    E-Print Network [OSTI]

    Lotfifard, Saeed

    2012-10-19T23:59:59.000Z

    Quality Meters (PQM), are installed to capture harmonics and certain disturbances for analyzing the power quality indices. Digital Protective Relays are utilized to detect occurrence of the faults and isolate faulted section as fast as possible. Digital... Protective Relays) use synchronous methods [28]. Therefore, if the available data is provided by RTUs, fault location methods that operate based on direct comparison of the input samples cannot be 17 utilized. However, if the data could be gathered from...

  8. Thermal anomaly near the Aigio fault, Gulf of Corinth, Greece, maybe due to convection below the fault

    E-Print Network [OSTI]

    Thermal anomaly near the Aigio fault, Gulf of Corinth, Greece, maybe due to convection below intersecting the active Aigio fault, Corinth Rift, Greece. The heat flow is 53 mW/m2 , indicating of Corinth, Greece, maybe due to convection below the fault, Geophys. Res. Lett., 34, L06314, doi:10

  9. Spatial analysis of hypocenter to fault relationships for determining fault process zone width in Japan.

    SciTech Connect (OSTI)

    Arnold, Bill Walter; Roberts, Barry L.; McKenna, Sean Andrew; Coburn, Timothy C. (Abilene Christian University, Abilene, TX)

    2004-09-01T23:59:59.000Z

    Preliminary investigation areas (PIA) for a potential repository of high-level radioactive waste must be evaluated by NUMO with regard to a number of qualifying factors. One of these factors is related to earthquakes and fault activity. This study develops a spatial statistical assessment method that can be applied to the active faults in Japan to perform such screening evaluations. This analysis uses the distribution of seismicity near faults to define the width of the associated process zone. This concept is based on previous observations of aftershock earthquakes clustered near active faults and on the assumption that such seismic activity is indicative of fracturing and associated impacts on bedrock integrity. Preliminary analyses of aggregate data for all of Japan confirmed that the frequency of earthquakes is higher near active faults. Data used in the analysis were obtained from NUMO and consist of three primary sources: (1) active fault attributes compiled in a spreadsheet, (2) earthquake hypocenter data, and (3) active fault locations. Examination of these data revealed several limitations with regard to the ability to associate fault attributes from the spreadsheet to locations of individual fault trace segments. In particular, there was no direct link between attributes of the active faults in the spreadsheet and the active fault locations in the GIS database. In addition, the hypocenter location resolution in the pre-1983 data was less accurate than for later data. These pre-1983 hypocenters were eliminated from further analysis.

  10. Remote File Access 2010

    E-Print Network [OSTI]

    University of Technology, Sydney

    Remote File Access 2010 Mac Users Guide #12;Remote File Access: MAC Users Guide 2010 2 Table Remote File Access 11 Part IV: Using Remote File Access 15 Part V: FAQ 24 #12;Remote File Access: MAC Users Guide 2010 3 1. What is Remote File Access? UTS Remote File Access service is provided to enable

  11. Pressure test data reveal reservoir barriers/faults

    SciTech Connect (OSTI)

    Hurd, J.D.

    1984-07-30T23:59:59.000Z

    A review of transient pressure test data from an oil reservoir in Libya indicated not only the suspected fault barriers, but also the non-sealing portions of the faults. Extensive seismic data indicated much faulting, and directional trends had been interpreted to be generally northwest-southeast. The reservoir is a heterogeneous dolomite with average permeability of 40 to 50 md and contains neither natural fractures not stratification. Vertical displacement (throw) of each fault block is indicated to be within the range of the dolomite thickness, i.e., 40 to 180 ft. Therefore, when the fault throw is greater than reservoir thickness there is sealing, and when the throw is less than reservoir thickness the faults are non-sealing.

  12. Remote Method Invocation Remote Method Invocation

    E-Print Network [OSTI]

    Hao, Jin-Kao

    Remote Method Invocation Remote Method Invocation Jean-Michel Richer jean-michel.richer@univ-angers.fr http://www.info.univ-angers.fr/pub/richer M2 Informatique 2010-2011 1 / 22 #12;Remote Method Invocation Plan Plan 1 Introduction 2 RMI en d´etails 3 Exemple 4 Application 2 / 22 #12;Remote Method Invocation

  13. The Starr fault system of southeastern Ohio

    SciTech Connect (OSTI)

    Brannock, M.C. (Qauker State Corp., Belpre, OH (United States))

    1993-08-01T23:59:59.000Z

    The Starr fault system is a series of east-west-trending faults located in southeastern Ohio. This fault system was discovered by mapping the anomalous sedimentary sequence of the [open quotes]Big Lime[close quotes]. The Big Lime is a driller's term for the stratigraphic section that includes the Lower Devonian Onondaga through Middle Silurian Lockport formations. The use of trend-surface analysis identified the probable fault orientation, which was then verified by seismic. The system is a series of high-angle faults, originating in the Precambrian, that occur along a narrow corridor traversing several townships. Analysis of the sedimentary section preserved by faulting indicates fault movement after the deposition of the Bass Island Formation, which was followed by a regional unconformity that removed the Bass Islands and a part of the upper Salina Formation. The Onondaga subsequently was deposited, masking fault movement evidence in the shallower formations. Some minor movement occurred later, as evidenced by the expansion in the Devonian shale sequence. The geometry of the fault system and other data suggest a pattern similar to the Albio-Scipio field of southern Michigan. A group of wells were drilled to test the Ordovician Trenton and Black River formations to determine the existence of secondary dolomite, which could be a potential reservoir. Secondary dolomite was encountered, but no commercial hydrocarbons were found in either the Trenton or Black River. Other formations produced hydrocarbons and water from fractured zones that were not known for this behavior. Other probable fault systems in southern Ohio, identified by using the same mapping techniques, may provide deeper targets for future drilling.

  14. Tamper indicating bolt

    DOE Patents [OSTI]

    Blagin, Sergei V.; Barkanov, Boris P.

    2004-09-14T23:59:59.000Z

    A tamper-indicating fastener has a cylindrical body with threads extending from one end along a portion of the body, and a tamper indicating having a transducer for converting physical properties of the body into electronic data; electronics for recording the electronic data; and means for communicating the recorded information to a remote location from said fastener. The electronics includes a capacitor that varies as a function of force applied by the fastener, and non-volatile memory for recording instances when the capacitance varies, providing an indication of unauthorized access.

  15. Fault tolerant pulse synchronization 

    E-Print Network [OSTI]

    Deconda, Keerthi

    2009-05-15T23:59:59.000Z

    FFC n=4 orig alg n=4 ft alg n=7 orig alg n=7 ft alg n=10 orig alg n=10 ft alg 24 (a) n=4, f=1. (b) n=7, f=2. Fig. 5: Convergence Time with No Jump faults. 0 50 100 150 200 250 70 100 250 500 Tim e to co nv erg e FFC orig alg: no faults... orig alg: NoJump faults ft alg:NoJump faults 0 50 100 150 200 250 300 350 400 450 70 100 250 500 Tim e to co nv erg e FFC orig alg: no faults orig alg: NoJump faults ft alg:NoJump faults 25 (c) n=10, f=3. Fig. 5 (Continued) Fig. 5(a...

  16. Analysis of the growth of strike-slip faults using effective medium theory

    SciTech Connect (OSTI)

    Aydin, A.; Berryman, J.G.

    2009-10-15T23:59:59.000Z

    Increases in the dimensions of strike-slip faults including fault length, thickness of fault rock and the surrounding damage zone collectively provide quantitative definition of fault growth and are commonly measured in terms of the maximum fault slip. The field observations indicate that a common mechanism for fault growth in the brittle upper crust is fault lengthening by linkage and coalescence of neighboring fault segments or strands, and fault rock-zone widening into highly fractured inner damage zone via cataclastic deformation. The most important underlying mechanical reason in both cases is prior weakening of the rocks surrounding a fault's core and between neighboring fault segments by faulting-related fractures. In this paper, using field observations together with effective medium models, we analyze the reduction in the effective elastic properties of rock in terms of density of the fault-related brittle fractures and fracture intersection angles controlled primarily by the splay angles. Fracture densities or equivalent fracture spacing values corresponding to the vanishing Young's, shear, and quasi-pure shear moduli were obtained by extrapolation from the calculated range of these parameters. The fracture densities or the equivalent spacing values obtained using this method compare well with the field data measured along scan lines across the faults in the study area. These findings should be helpful for a better understanding of the fracture density/spacing distribution around faults and the transition from discrete fracturing to cataclastic deformation associated with fault growth and the related instabilities.

  17. Handleiding Remote Desktop Service

    E-Print Network [OSTI]

    Galis, Frietson

    Handleiding Remote Desktop Service Versie: 1.3 Remote Desktop Datum: 29-08-2013 #12;2 Configureren Remote Desktop Connection 1) Type in de zoekbalk van Windows 7: "remote" of "mstsc" en start de applicatie "Remote Desktop Connection" zoals in onderstaand voorbeeld wordt getoond. 2) Selecteer "Show

  18. Remote Access

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Scienceand Requirements Recently ApprovedReliability Technology earnsRemembering 9-11'sRemote

  19. Fault simulation and test generation for small delay faults

    E-Print Network [OSTI]

    Qiu, Wangqi

    2007-04-25T23:59:59.000Z

    Delay faults are an increasingly important test challenge. Traditional delay fault models are incomplete in that they model only a subset of delay defect behaviors. To solve this problem, a more realistic delay fault model has been developed which...

  20. Optimal fault location

    E-Print Network [OSTI]

    Knezev, Maja

    2009-05-15T23:59:59.000Z

    are triggered. Protection system consisting of protection relays and circuit breakers (CBs) will operate in order to de-energize faulted line. Different Intelligent Electronic Devices (IEDs) located in substations for the purpose of monitoring... in the control center by an operator who will mark fault event in a spreadsheet and inform other staff responsible for dealing with fault analysis and repair such as protection group or maintenance respectively. Protective relaying staff will be ready...

  1. Optimal fault location

    E-Print Network [OSTI]

    Knezev, Maja

    2008-10-10T23:59:59.000Z

    are triggered. Protection system consisting of protection relays and circuit breakers (CBs) will operate in order to de-energize faulted line. Different Intelligent Electronic Devices (IEDs) located in substations for the purpose of monitoring... in the control center by an operator who will mark fault event in a spreadsheet and inform other staff responsible for dealing with fault analysis and repair such as protection group or maintenance respectively. Protective relaying staff will be ready...

  2. Sandia National Laboratories: REMOTE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    REMOTE Sandia to Partner with MOgene Green Chemicals on ARPA-E REMOTE Project On October 2, 2013, in Energy, News, News & Events, Partnership, Research & Capabilities,...

  3. Multiple node remote messaging

    DOE Patents [OSTI]

    Blumrich, Matthias A. (Ridgefield, CT); Chen, Dong (Croton on Hudson, NY); Gara, Alan G. (Mount Kisco, NY); Giampapa, Mark E. (Irvington, NY); Heidelberger, Philip (Cortlandt Manor, NY); Ohmacht, Martin (Yorktown Heights, NY); Salapura, Valentina (Chappaqua, NY); Steinmacher-Burow, Burkhard (Esslingen, DE); Vranas, Pavlos (Danville, CA)

    2010-08-31T23:59:59.000Z

    A method for passing remote messages in a parallel computer system formed as a network of interconnected compute nodes includes that a first compute node (A) sends a single remote message to a remote second compute node (B) in order to control the remote second compute node (B) to send at least one remote message. The method includes various steps including controlling a DMA engine at first compute node (A) to prepare the single remote message to include a first message descriptor and at least one remote message descriptor for controlling the remote second compute node (B) to send at least one remote message, including putting the first message descriptor into an injection FIFO at the first compute node (A) and sending the single remote message and the at least one remote message descriptor to the second compute node (B).

  4. Remote Sensing Analysis of the Sierra Blanca (Faskin Ranch) Low-Level Radioactive Waste Disposal Site, Hudspeth County, Texas

    SciTech Connect (OSTI)

    LeMone, D. V.; Dodge, R.; Xie, H.; Langford, R. P.; Keller, G. R.

    2002-02-26T23:59:59.000Z

    Remote sensing images provide useful physical information, revealing such features as geological structure, vegetation, drainage patterns, and variations in consolidated and unconsolidated lithologies. That technology has been applied to the failed Sierra Blanca (Faskin Ranch) shallow burial low-level radioactive waste disposal site selected by the Texas Low-Level Radioactive Waste Disposal Authority. It has been re-examined using data from LANDSAT satellite series. The comparison of the earlier LANDSAT V (5/20/86) (30-m resolution) with the later new, higher resolution ETM imagery (10/23/99) LANDSAT VII data (15-m resolution) clearly shows the superiority of the LANDSAT VII data. The search for surficial indications of evidence of fatal flaws at the Sierra Blanca site utilizing was not successful, as it had been in the case of the earlier remote sensing analysis of the failed Fort Hancock site utilizing LANDSAT V data. The authors conclude that the tectonic activity at the Sierra Blanca site is much less recent and active than in the previously studied Fort Hancock site. The Sierra Blanca site failed primarily on the further needed documentation concerning a subsurface fault underneath the site and environmental justice issues. The presence of this fault was not revealed using the newer LANDSAT VII data. Despite this fact, it must be remembered that remote sensing provides baseline documentation for determining future physical and financial remediation responsibilities. On the basis of the two sites examined by LANDSAT remote sensing imaging, it is concluded that it is an essential, cost-effective tool that should be utilized not only in site examination but also in all nuclear-related facilities.

  5. Method of detecting the direction of arcing faults on power distribution feeders

    E-Print Network [OSTI]

    Fernando, W. Anand Krisantha

    1992-01-01T23:59:59.000Z

    lines served by the same substation, resulting in false indications on the other feeders, in the case of an arcing fault. Two primary methods of detecting directionality of power system faults exist, impedance relaying and traveling wave relaying... is of significant magnitude to cause a current reversal in the case of a reverse fault [18]. 2. Traveling Wave Relaying The need for more accurate and fast detection of fault and direction of very high voltage transmission lines, was the base of invention...

  6. Detection and diagnosis of faults and energy monitoring of HVAC systems with least-intrusive power analysis

    E-Print Network [OSTI]

    Luo, Dong, 1966-

    2001-01-01T23:59:59.000Z

    Faults indicate degradation or sudden failure of equipment in a system. Widely existing in heating, ventilating, and air conditioning (HVAC) systems, faults always lead to inefficient energy consumption, undesirable indoor ...

  7. Investigation of the Meers fault in southwestern Oklahoma

    SciTech Connect (OSTI)

    Luza, K.V.; Madole, R.F.; Crone, A.J.

    1987-08-01T23:59:59.000Z

    The Meers fault is part of a major system of NW-trending faults that form the boundary between the Wichita Mountains and the Anadarko basin in southwestern Oklahoma. A portion of the Meers fault is exposed at the surface in northern Comanche County and strikes approximately N. 60/sup 0/ W. where it offsets Permian conglomerate and shale for at least 26 km. The scarp on the fault is consistently down to the south, with a maximum relief of 5 m near the center of the fault trace. Quaternary stratigraphic relationships and 10 /sup 14/C age dates constrain the age of the last movement of the Meers fault. The last movement postdates the Browns Creek Alluvium, late Pleistocene to early Holocene, and predates the East Cache Alluvium, 100 to 800 yr B.P. Fan alluvium, produced by the last fault movement, buried a soil that dates between 1400 and 1100 yr B.P. Two trenches excavated across the scarp near Canyon Creek document the near-surface deformation and provide some general information on recurrence. Trench 1 was excavated in the lower Holocene part of the Browns Creek Alluvium, and trench 2 was excavated in unnamed gravels thought to be upper Pleistocene. Flexing and warping was the dominant mode of deformation that produced the scarp. The stratigraphy in both trenches indicates one surface-faulting event, which implies a lengthy recurrence interval for surface faulting on this part of the fault. Organic-rich material from two samples that postdate the last fault movement yielded /sup 14/C ages between 1600 and 1300 yr B.P. These dates are in excellent agreement with the dates obtained from soils buried by the fault-related fan alluvium.

  8. ENGO 435 Remote Sensing LAB 1: INTRODUCTION TO REMOTE SENSING

    E-Print Network [OSTI]

    Habib, Ayman

    ENGO 435 ­ Remote Sensing Fall 2003 LAB 1: INTRODUCTION TO REMOTE SENSING Due: By 4:30 pm on September 30th Objectives: To familiarize you with: Remote sensing resources on the Internet. Some remote (Metadata). Part A: Remote Sensing Resources There is a wealth of remote sensing information and data

  9. Remote Desktop | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Remote Desktop Use a remote desktop connection to access your work computer from home. Using Remote Desktop to Connect to Your Work Computer With Remote Desktop, you can have...

  10. Transition-fault test generation

    E-Print Network [OSTI]

    Cobb, Bradley Douglas

    2013-02-22T23:59:59.000Z

    . One way to detect these timing defects is to apply test patterns to the integrated circuit that are generated using the transition-fault model. Unfortunately, industry's current transition-fault test generation schemes produce test sets that are too...

  11. Fault tolerant linear actuator

    DOE Patents [OSTI]

    Tesar, Delbert

    2004-09-14T23:59:59.000Z

    In varying embodiments, the fault tolerant linear actuator of the present invention is a new and improved linear actuator with fault tolerance and positional control that may incorporate velocity summing, force summing, or a combination of the two. In one embodiment, the invention offers a velocity summing arrangement with a differential gear between two prime movers driving a cage, which then drives a linear spindle screw transmission. Other embodiments feature two prime movers driving separate linear spindle screw transmissions, one internal and one external, in a totally concentric and compact integrated module.

  12. Computer hardware fault administration

    DOE Patents [OSTI]

    Archer, Charles J. (Rochester, MN); Megerian, Mark G. (Rochester, MN); Ratterman, Joseph D. (Rochester, MN); Smith, Brian E. (Rochester, MN)

    2010-09-14T23:59:59.000Z

    Computer hardware fault administration carried out in a parallel computer, where the parallel computer includes a plurality of compute nodes. The compute nodes are coupled for data communications by at least two independent data communications networks, where each data communications network includes data communications links connected to the compute nodes. Typical embodiments carry out hardware fault administration by identifying a location of a defective link in the first data communications network of the parallel computer and routing communications data around the defective link through the second data communications network of the parallel computer.

  13. Remote File PC Users Guide

    E-Print Network [OSTI]

    University of Technology, Sydney

    UTS: ITD Remote File Access 2010 PC Users Guide V3.0 #12;UTS:ITD Remote File Access: PC Users Guide Part III: Accessing Remote File Access 8 Part IV: Using Remote File Access 14 Part V: FAQ 25 #12;UTS:ITD Remote File Access: PC Users Guide v3.0 2010 3 1. What is Remote File Access? UTS Remote File Access

  14. Fault Tolerant Quantum Filtering and Fault Detection for Quantum Systems

    E-Print Network [OSTI]

    Qing Gao; Daoyi Dong; Ian R. Petersen

    2015-04-26T23:59:59.000Z

    This paper aims to determine the fault tolerant quantum filter and fault detection equation for a class of open quantum systems coupled to laser fields and subject to stochastic faults. In order to analyze open quantum systems where the system dynamics involve both classical and quantum random variables, a quantum-classical probability space model is developed. Using a reference probability approach, a fault tolerant quantum filter and a fault detection equation are simultaneously derived for this class of open quantum systems. An example of two-level open quantum systems subject to Poisson-type faults is presented to illustrate the proposed method. These results have the potential to lead to a new fault tolerant control theory for quantum systems.

  15. Remote Sensing ENGO 435 Introduction to Remote Sensing

    E-Print Network [OSTI]

    Habib, Ayman

    1 Remote Sensing ENGO 435 Introduction to Remote Sensing Fall 2003 #12;2 Remote Sensing ENGO 435://www.geomatics.ucalgar.ca/~habib/courses.html #12;3 Remote Sensing ENGO 435 Grading Scheme · Lab Assignments (5 labs): (25% of Total Grade will be reduced by 10% per day for each day overdue. #12;4 Remote Sensing ENGO 435 Programming & Software

  16. Row fault detection system

    DOE Patents [OSTI]

    Archer, Charles Jens (Rochester, MN); Pinnow, Kurt Walter (Rochester, MN); Ratterman, Joseph D. (Rochester, MN); Smith, Brian Edward (Rochester, MN)

    2010-02-23T23:59:59.000Z

    An apparatus and program product check for nodal faults in a row of nodes by causing each node in the row to concurrently communicate with its adjacent neighbor nodes in the row. The communications are analyzed to determine a presence of a faulty node or connection.

  17. Row fault detection system

    DOE Patents [OSTI]

    Archer, Charles Jens (Rochester, MN); Pinnow, Kurt Walter (Rochester, MN); Ratterman, Joseph D. (Rochester, MN); Smith, Brian Edward (Rochester, MN)

    2012-02-07T23:59:59.000Z

    An apparatus, program product and method check for nodal faults in a row of nodes by causing each node in the row to concurrently communicate with its adjacent neighbor nodes in the row. The communications are analyzed to determine a presence of a faulty node or connection.

  18. Analysis of a Nuclear Accident: Fission and Activation Product Releases from the Fukushima Daiichi Nuclear Facility as Remote Indicators of Source Identification, Extent of Release, and State of Damaged Spent Nuclear Fuel

    SciTech Connect (OSTI)

    Schwantes, Jon M.; Orton, Christopher R.; Clark, Richard A.

    2012-09-10T23:59:59.000Z

    Measurements of several radionuclides within environmental samples taken from the Fukushima Daiichi nuclear facility and reported on the Tokyo Electric Power Company website following the recent tsunami-initiated catastrophe were evaluated for the purpose of identifying the source term, reconstructing the release mechanisms, and estimating the extent of the release. 136Cs/137Cs and 134Cs/137Cs ratios identified Units 1-3 as the major source of radioactive contamination to the surface soil close to the facility. A trend was observed between the fraction of the total core inventory released for a number of fission product isotopes and their corresponding Gibbs Free Energy of formation for the primary oxide form of the isotope, suggesting that release was dictated primarily by chemical volatility driven by temperature and reduction potential within the primary containment vessels of the vented reactors. The absence of any major fractionation beyond volatilization suggested all coolant had evaporated by the time of venting. High estimates for the fraction of the total inventory released of more volatile species (Te, Cs, I) indicated the damage to fuel bundles was likely extensive, minimizing any potential containment due to physical migration of these species through the fuel matrix and across the cladding wall. 238Pu/239,240Pu ratios close-in and at 30 km from the facility indicated that the damaged reactors were the major contributor of Pu to surface soil at the source but that this contribution likely decreased rapidly with distance from the facility. The fraction of the total Pu inventory released to the environment from venting units 1 and 3 was estimated to be ~0.003% based upon Pu/Cs isotope ratios relative to the within-reactor modeled inventory prior to venting and was consistent with an independent model evaluation that considered chemical volatility based upon measured fission product release trends. Significant volatile radionuclides within the spent fuel at the time of venting but not as yet observed and reported within environmental samples are suggested as potential analytes of concern for future environmental surveys around the site.

  19. Fault-tolerant, Universal Adiabatic Quantum Computation

    E-Print Network [OSTI]

    Ari Mizel

    2014-03-30T23:59:59.000Z

    Quantum computation has revolutionary potential for speeding computational tasks such as factoring and simulating quantum systems, but the task of constructing a quantum computer is daunting. Adiabatic quantum computation and other ``hands-off" approaches relieve the need for rapid, precise pulsing to control the system, inspiring at least one high-profile effort to realize a hands-off quantum computing device. But is hands-off incompatible with fault-tolerant? Concerted effort and many innovative ideas have not resolved this question but have instead deepened it, linking it to fundamental problems in quantum complexity theory. Here we present a hands-off approach that is provably (a) capable of scalable universal quantum computation in a non-degenerate ground state and (b) fault-tolerant against an analogue of the usual local stochastic fault model. A satisfying physical and numerical argument indicates that (c) it is also fault-tolerant against thermal excitation below a threshold temperature independent of the computation size.

  20. Remote reset circuit

    DOE Patents [OSTI]

    Gritzo, Russell E. (West Melbourne, FL)

    1987-01-01T23:59:59.000Z

    A remote reset circuit acts as a stand-alone monitor and controller by clocking in each character sent by a terminal to a computer and comparing it to a given reference character. When a match occurs, the remote reset circuit activates the system's hardware reset line. The remote reset circuit is hardware based centered around monostable multivibrators and is unaffected by system crashes, partial serial transmissions, or power supply transients.

  1. Remote Systems Design & Deployment

    SciTech Connect (OSTI)

    Bailey, Sharon A.; Baker, Carl P.; Valdez, Patrick LJ

    2009-08-28T23:59:59.000Z

    The Pacific Northwest National Laboratory (PNNL) was tasked by Washington River Protection Solutions, LLC (WRPS) to provide information and lessons learned relating to the design, development and deployment of remote systems, particularly remote arm/manipulator systems. This report reflects PNNL’s experience with remote systems and lays out the most important activities that need to be completed to successfully design, build, deploy and operate remote systems in radioactive and chemically contaminated environments. It also contains lessons learned from PNNL’s work experiences, and the work of others in the national laboratory complex.

  2. Remote Belief: Preserving Volition 2 Remote Belief: Preserving Volition 3

    E-Print Network [OSTI]

    Sivilotti, Paul

    1 ! " Remote Belief: Preserving Volition 2 # $ % & # ' # (& #) & $ $ $ $ $ & $ * # # $ $ * # * # $ $ # $ & # * & & %+ $ ' # & $ Remote Belief: Preserving Volition 3 , $ (- ). / $ / $ / 0 1/ / & $ / 0 $ $ & (1 - & ) 2 & # & $ & / 3 & / * # $ / 4 & Remote Belief: Preserving Volition 4 ! All possible scenarios Equivalence classes of scenarios

  3. Development of Characterization Technology for Fault Zone Hydrology

    SciTech Connect (OSTI)

    Karasaki, Kenzi; Onishi, Tiemi; Gasperikova, Erika; Goto, Junichi; Tsuchi, Hiroyuki; Miwa, Tadashi; Ueta, Keiichi; Kiho, Kenzo; MIyakawa, Kimio

    2010-08-06T23:59:59.000Z

    Several deep trenches were cut, and a number of geophysical surveys were conducted across the Wildcat Fault in the hills east of Berkeley, California. The Wildcat Fault is believed to be a strike-slip fault and a member of the Hayward Fault System, with over 10 km of displacement. So far, three boreholes of ~;; 150m deep have been core-drilled and borehole geophysical logs were conducted. The rocks are extensively sheared and fractured; gouges were observed at several depths and a thick cataclasitic zone was also observed. While confirming some earlier, published conclusions from shallow observations about Wildcat, some unexpected findings were encountered. Preliminary analysis indicates that Wildcat near the field site consists of multiple faults. The hydraulic test data suggest the dual properties of the hydrologic structure of the fault zone. A fourth borehole is planned to penetrate the main fault believed to lie in-between the holes. The main philosophy behind our approach for the hydrologic characterization of such a complex fractured system is to let the system take its own average and monitor a long term behavior instead of collecting a multitude of data at small length and time scales, or at a discrete fracture scale and to ?up-scale,? which is extremely tenuous.

  4. Development of Asset Fault Signatures for Prognostic and Health Management in the Nuclear Industry

    SciTech Connect (OSTI)

    Vivek Agarwal; Nancy J. Lybeck; Randall Bickford; Richard Rusaw

    2014-06-01T23:59:59.000Z

    Proactive online monitoring in the nuclear industry is being explored using the Electric Power Research Institute’s Fleet-Wide Prognostic and Health Management (FW-PHM) Suite software. The FW-PHM Suite is a set of web-based diagnostic and prognostic tools and databases that serves as an integrated health monitoring architecture. The FW-PHM Suite has four main modules: Diagnostic Advisor, Asset Fault Signature (AFS) Database, Remaining Useful Life Advisor, and Remaining Useful Life Database. This paper focuses on development of asset fault signatures to assess the health status of generator step-up generators and emergency diesel generators in nuclear power plants. Asset fault signatures describe the distinctive features based on technical examinations that can be used to detect a specific fault type. At the most basic level, fault signatures are comprised of an asset type, a fault type, and a set of one or more fault features (symptoms) that are indicative of the specified fault. The AFS Database is populated with asset fault signatures via a content development exercise that is based on the results of intensive technical research and on the knowledge and experience of technical experts. The developed fault signatures capture this knowledge and implement it in a standardized approach, thereby streamlining the diagnostic and prognostic process. This will support the automation of proactive online monitoring techniques in nuclear power plants to diagnose incipient faults, perform proactive maintenance, and estimate the remaining useful life of assets.

  5. Remotely sensed mesoscale oceanography and the distribution of Illex argentinus

    E-Print Network [OSTI]

    Pierce, Graham

    Remotely sensed mesoscale oceanography and the distribution of Illex argentinus in the South consider the in¯uence of mesoscale oceanographic processes around the Falkland Islands (Islas Malvinas remotely sensed satellite images were used as an indicator of mesoscale oceanographic activity and compared

  6. Remote USB Ports

    E-Print Network [OSTI]

    Roshan, Rakesh

    2013-10-01T23:59:59.000Z

    or actuator placed in fields can be accessed by a system remotely and securely. In this thesis, we propose a remote USB port, which is an abstraction of a USB port. In the USB core driver of the server machine, with the hub information, port status of all...

  7. Remote actuated valve implant

    DOE Patents [OSTI]

    McKnight, Timothy E; Johnson, Anthony; Moise, Jr., Kenneth J; Ericson, Milton Nance; Baba, Justin S; Wilgen, John B; Evans, III, Boyd McCutchen

    2014-02-25T23:59:59.000Z

    Valve implant systems positionable within a flow passage, the systems having an inlet, an outlet, and a remotely activatable valve between the inlet and outlet, with the valves being operable to provide intermittent occlusion of the flow path. A remote field is applied to provide thermal or magnetic activation of the valves.

  8. Stress and fault rock controls on fault zone hydrology, Coso...

    Open Energy Info (EERE)

    rock controls on fault zone hydrology, Coso geothermal field, CA Abstract In crystalline rock of the Coso Geothermal Field, CA, fractures are the primary source of permeability....

  9. Remote extraction and destruction of spread qubit information

    E-Print Network [OSTI]

    Yoshiko Ogata; Mio Murao

    2007-11-12T23:59:59.000Z

    Necessary and sufficient conditions for deterministic remote extraction and destruction of qubit information encoded in bipartite states using only local operations and classical communications (LOCC) are presented. The conditions indicate that there is a way to asymmetrically spread qubit information between two parties such that it can be remotely extracted with unit probability at one of the parties but not at the other as long as they are using LOCC. Remote destruction can also be asymmetric between the two parties, but the conditions are incompatible with those for remote extraction.

  10. Center for Remote Sensing Remote Sensing Seminar Series 2009

    E-Print Network [OSTI]

    Firestone, Jeremy

    Feili Li Center for Remote Sensing 10-20-2009 Remote Sensing Seminar Series 2009 #12;Outline for Meteorological Satellite Studies · University of South Florida - Institute for Marine Remote Sensing · Rutgers MODIS Today Real-Time Polar Remote Sensing Products #12;Software Visualization FlAniS AniS is still

  11. The nature of the Heart Mountain fault in the vicinity of Dead Indian Hill, Park County, Wyoming

    E-Print Network [OSTI]

    Sungy, Eugene Donald

    1977-01-01T23:59:59.000Z

    Excellent exposure of the Madison section within the transgressive fault NW ~? Sec 33, T55N, R104W . 32 Cross-section of the transgressive and bedding faults along line A - A' (Map 1) 35 10 Outcrop of Heart Mountain fault block found near Bear Springs... are necessary for faults that do not EXPLANATION m Ql O O LIJ Volcanic rocks, undifferentiated. Mostly early basic breccia. Hachured line indicates volcanic rock resting on Heart Mountain fault plane. Rocks of Eocene age. (Willwood Formation). Rock...

  12. RELIABILITY ANALYSIS IN A FAULT TOLERANT CONTROL STRATEGY DEDICATED TO ACTIVE POWER FILTER

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    RELIABILITY ANALYSIS IN A FAULT TOLERANT CONTROL STRATEGY DEDICATED TO ACTIVE POWER FILTER P. WEBER reliability indicate the optimal structure. Keywords: Fault Tolerant Control, System Reliability, Active power control and nuclear power plant operation (Zhang and Jiang, 2003). Various studies on FTC are based

  13. Can Fault Prediction Models and Metrics be Used for Vulnerability Prediction? Yonghee Shin and Laurie Williams

    E-Print Network [OSTI]

    Young, R. Michael

    Can Fault Prediction Models and Metrics be Used for Vulnerability Prediction? Yonghee Shin to prioritize security inspection and testing efforts may be better served by a prediction model that indicates commonalities that may allow development teams to use traditional fault prediction models and metrics

  14. Fault current limiter

    DOE Patents [OSTI]

    Darmann, Francis Anthony

    2013-10-08T23:59:59.000Z

    A fault current limiter (FCL) includes a series of high permeability posts for collectively define a core for the FCL. A DC coil, for the purposes of saturating a portion of the high permeability posts, surrounds the complete structure outside of an enclosure in the form of a vessel. The vessel contains a dielectric insulation medium. AC coils, for transporting AC current, are wound on insulating formers and electrically interconnected to each other in a manner such that the senses of the magnetic field produced by each AC coil in the corresponding high permeability core are opposing. There are insulation barriers between phases to improve dielectric withstand properties of the dielectric medium.

  15. Fault Current Limiters

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy Chinaof EnergyImpactOnSTATEMENT OF DAVID GEISEREnergy1DNVDOE'sUAfter 12Fault

  16. REMOTE SENSING OF THE ENVIRONMENT

    E-Print Network [OSTI]

    Gilbes, Fernando

    1 CHAPTER 1: REMOTE SENSING OF THE ENVIRONMENT REFERENCE: Remote Sensing of the Environment John R. Jensen (2007) Second Edition Pearson Prentice Hall What is Remote Sensing? #12;2 Photogrammetry ­ the art of identifying objects and judging their significance (Colwell, 1966). Remote Sensing ­ the measurement

  17. Observer-based fault detection for nuclear reactors

    E-Print Network [OSTI]

    Li, Qing, 1972-

    2001-01-01T23:59:59.000Z

    This is a study of fault detection for nuclear reactor systems. Basic concepts are derived from fundamental theories on system observers. Different types of fault- actuator fault, sensor fault, and system dynamics fault ...

  18. Thermal Infrared Remote Sensing

    E-Print Network [OSTI]

    Thermal Infrared Remote Sensing Thermal Infrared Remote Sensing #12;0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4 and x-ray Ultraviolet Infrared Microwave and radio waves Wavelength in meters (m) Electromagnetic.77 700 red limit 30k0.041 2.48 green500 near-infrared far infrared ultraviolet Thermal Infrare refers

  19. Remote electrochemical sensor

    DOE Patents [OSTI]

    Wang, Joseph (Las Cruces, NM); Olsen, Khris (Richland, WA); Larson, David (Las Cruces, NM)

    1997-01-01T23:59:59.000Z

    An electrochemical sensor for remote detection, particularly useful for metal contaminants and organic or other compounds. The sensor circumvents technical difficulties that previously prevented in-situ remote operations. The microelectrode, connected to a long communications cable, allows convenient measurements of the element or compound at timed and frequent intervals and instrument/sample distances of ten feet to more than 100 feet. The sensor is useful for both downhole groundwater monitoring and in-situ water (e.g., shipboard seawater) analysis.

  20. Colorado Regional Faults

    SciTech Connect (OSTI)

    Hussein, Khalid

    2012-02-01T23:59:59.000Z

    Citation Information: Originator: Earth Science &Observation Center (ESOC), CIRES, University of Colorado at Boulder Originator: Colorado Geological Survey (CGS) Publication Date: 2012 Title: Regional Faults Edition: First Publication Information: Publication Place: Earth Science & Observation Center, Cooperative Institute for Research in Environmental Science, University of Colorado, Boulder Publisher: Earth Science &Observation Center (ESOC), CIRES, University of Colorado at Boulder Description: This layer contains the regional faults of Colorado Spatial Domain: Extent: Top: 4543192.100000 m Left: 144385.020000 m Right: 754585.020000 m Bottom: 4094592.100000 m Contact Information: Contact Organization: Earth Science &Observation Center (ESOC), CIRES, University of Colorado at Boulder Contact Person: Khalid Hussein Address: CIRES, Ekeley Building Earth Science & Observation Center (ESOC) 216 UCB City: Boulder State: CO Postal Code: 80309-0216 Country: USA Contact Telephone: 303-492-6782 Spatial Reference Information: Coordinate System: Universal Transverse Mercator (UTM) WGS’1984 Zone 13N False Easting: 500000.00000000 False Northing: 0.00000000 Central Meridian: -105.00000000 Scale Factor: 0.99960000 Latitude of Origin: 0.00000000 Linear Unit: Meter Datum: World Geodetic System 1984 (WGS ’984) Prime Meridian: Greenwich Angular Unit: Degree Digital Form: Format Name: Shape file

  1. Undulator Hall Air Temperature Fault Scenarios

    SciTech Connect (OSTI)

    Sevilla, J.; Welch, J.; /SLAC; ,

    2010-11-17T23:59:59.000Z

    Recent experience indicates that the LCLS undulator segments must not, at any time following tuning, be allowed to change temperature by more than about {+-}2.5 C or the magnetic center will irreversibly shift outside of acceptable tolerances. This vulnerability raises a concern that under fault conditions the ambient temperature in the Undulator Hall might go outside of the safe range and potentially could require removal and retuning of all the segments. In this note we estimate changes that can be expected in the Undulator Hall air temperature for three fault scenarios: (1) System-wide power failure; (2) Heating Ventilation and Air Conditioning (HVAC) system shutdown; and (3) HVAC system temperature regulation fault. We find that for either a system-wide power failure or an HVAC system shutdown (with the technical equipment left on), the short-term temperature changes of the air would be modest due to the ability of the walls and floor to act as a heat ballast. No action would be needed to protect the undulator system in the event of a system-wide power failure. Some action to adjust the heat balance, in the case of the HVAC power failure with the equipment left on, might be desirable but is not required. On the other hand, a temperature regulation failure of the HVAC system can quickly cause large excursions in air temperature and prompt action would be required to avoid damage to the undulator system.

  2. Synchronized sampling improves fault location

    SciTech Connect (OSTI)

    Kezunovic, M. [Texas A and M Univ., College Station, TX (United States)] [Texas A and M Univ., College Station, TX (United States); Perunicic, B. [Lamar Univ., Beaumont, TX (United States)] [Lamar Univ., Beaumont, TX (United States)

    1995-04-01T23:59:59.000Z

    Transmission line faults must be located accurately to allow maintenance crews to arrive at the scene and repair the faulted section as soon as possible. Rugged terrain and geographical layout cause some sections of power transmission lines to be difficult to reach. In the past, a variety of fault location algorithms were introduced as either an add-on feature in protective relays or stand-alone implementation in fault locators. In both cases, the measurements of current and voltages were taken at one terminal of a transmission line only. Under such conditions, it may become difficult to determine the fault location accurately, since data from other transmission line ends are required for more precise computations. In the absence of data from the other end, existing algorithms have accuracy problems under several circumstances, such as varying switching and loading conditions, fault infeed from the other end, and random value of fault resistance. Most of the one-end algorithms were based on estimation of voltage and current phasors. The need to estimate phasors introduces additional difficulty in high-speed tripping situations where the algorithms may not be fast enough in determining fault location accurately before the current signals disappear due to the relay operation and breaker opening. This article introduces a unique concept of high-speed fault location that can be implemented either as a simple add-on to the digital fault recorders (DFRs) or as a stand-alone new relaying function. This advanced concept is based on the use of voltage and current samples that are synchronously taken at both ends of a transmission line. This sampling technique can be made readily available in some new DFR designs incorporating receivers for accurate sampling clock synchronization using the satellite Global Positioning System (GPS).

  3. Automated Fault Location In Smart Distribution Systems 

    E-Print Network [OSTI]

    Lotfifard, Saeed

    2012-10-19T23:59:59.000Z

    ............................................................................................................................ 88 x LIST OF FIGURES Page Figure 1 Multiple possible fault location estimation for a fault at node A ........................ 7 Figure 2 Simple faulted network model [1] © [2011] IEEE ............................................ 40 Figure 3... Types C and D voltage sags for different phases [51] © [2003] IEEE .............. 42 Figure 4 Rf estimation procedure [1] © [2011] IEEE ...................................................... 45 Figure 5 Flow chart of the fault location algorithm [1...

  4. Hot Pot Detail - Evidence of Quaternary Faulting

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Lane, Michael

    Compilation of published data, field observations and photo interpretation relevant to Quaternary faulting at Hot Pot.

  5. Hot Pot Detail - Evidence of Quaternary Faulting

    SciTech Connect (OSTI)

    Lane, Michael

    2013-06-27T23:59:59.000Z

    Compilation of published data, field observations and photo interpretation relevant to Quaternary faulting at Hot Pot.

  6. Arc fault detection system

    DOE Patents [OSTI]

    Jha, Kamal N. (Bethel Park, PA)

    1999-01-01T23:59:59.000Z

    An arc fault detection system for use on ungrounded or high-resistance-grounded power distribution systems is provided which can be retrofitted outside electrical switchboard circuits having limited space constraints. The system includes a differential current relay that senses a current differential between current flowing from secondary windings located in a current transformer coupled to a power supply side of a switchboard, and a total current induced in secondary windings coupled to a load side of the switchboard. When such a current differential is experienced, a current travels through a operating coil of the differential current relay, which in turn opens an upstream circuit breaker located between the switchboard and a power supply to remove the supply of power to the switchboard.

  7. Arc fault detection system

    DOE Patents [OSTI]

    Jha, K.N.

    1999-05-18T23:59:59.000Z

    An arc fault detection system for use on ungrounded or high-resistance-grounded power distribution systems is provided which can be retrofitted outside electrical switchboard circuits having limited space constraints. The system includes a differential current relay that senses a current differential between current flowing from secondary windings located in a current transformer coupled to a power supply side of a switchboard, and a total current induced in secondary windings coupled to a load side of the switchboard. When such a current differential is experienced, a current travels through a operating coil of the differential current relay, which in turn opens an upstream circuit breaker located between the switchboard and a power supply to remove the supply of power to the switchboard. 1 fig.

  8. On-line implementation of a fault diagnosis system for three-phase induction motors

    E-Print Network [OSTI]

    Alladi, Vijaya Mallikarjun

    2002-01-01T23:59:59.000Z

    regarding the health of the motor and automates the monitoring process. Negative sequence components and the root mean square of the harmonics of the current residuals are used as indicators for identifying electrical and mechanical faults in the motor...

  9. Remote radiation dosimetry

    DOE Patents [OSTI]

    Braunlich, P.F.; Tetzlaff, W.; Hegland, J.E.; Jones, S.C.

    1991-03-12T23:59:59.000Z

    Disclosed are methods and apparatus for remotely measuring radiation levels. Such are particularly useful for measuring relatively high levels or dosages of radiation being administered in radiation therapy. They are also useful for more general radiation level measurements where remote sensing from the remaining portions of the apparatus is desirable. The apparatus uses a beam generator, such as a laser beam, to provide a stimulating beam. The stimulating beam is preferably of wavelengths shorter than 6 microns, or more advantageously less than 2 microns. The stimulating beam is used to stimulate a remote luminescent sensor mounted in a probe which emits stored luminescent energy resulting from exposure of the sensor to ionizing radiation. The stimulating beam is communicated to the remote luminescent sensor via a transmissive fiber which also preferably serves to return the emission from the luminescent sensor. The stimulating beam is advantageously split by a beam splitter to create a detector beam which is measured for power during a reading period during which the luminescent phosphor is read. The detected power is preferably used to control the beam generator to thus produce desired beam power during the reading period. The luminescent emission from the remote sensor is communicated to a suitable emission detector, preferably after filtering or other selective treatment to better isolate the luminescent emission. 8 figures.

  10. Remote connector development study

    SciTech Connect (OSTI)

    Parazin, R.J.

    1995-05-01T23:59:59.000Z

    Plutonium-uranium extraction (PUREX) connectors, the most common connectors used at the Hanford site, offer a certain level of flexibility in pipe routing, process system configuration, and remote equipment/instrument replacement. However, these desirable features have inherent shortcomings like leakage, high pressure drop through the right angle bends, and a limited range of available pipe diameters that can be connect by them. Costs for construction, maintenance, and operation of PUREX connectors seem to be very high. The PUREX connector designs include a 90{degree} bend in each connector. This increases the pressure drop and erosion effects. Thus, each jumper requires at least two 90{degree} bends. PUREX connectors have not been practically used beyond 100 (4 in.) inner diameter. This study represents the results of a survey on the use of remote pipe-connection systems in US and foreign plants. This study also describes the interdependence between connectors, remote handling equipment, and the necessary skills of the operators.

  11. Remote electrochemical sensor

    DOE Patents [OSTI]

    Wang, J.; Olsen, K.; Larson, D.

    1997-10-14T23:59:59.000Z

    An electrochemical sensor is described for remote detection, particularly useful for metal contaminants and organic or other compounds. The sensor circumvents technical difficulties that previously prevented in-situ remote operations. The microelectrode, connected to a long communications cable, allows convenient measurements of the element or compound at timed and frequent intervals and instrument/sample distances of ten feet to more than 100 feet. The sensor is useful for both downhole groundwater monitoring and in-situ water (e.g., shipboard seawater) analysis. 21 figs.

  12. Internal structure of the Kern Canyon Fault, California: a deeply exhumed strike-slip fault

    E-Print Network [OSTI]

    Neal, Leslie Ann

    2002-01-01T23:59:59.000Z

    Deformation and mineral alteration adjacent to a 2 km long segment of the Kern Canyon fault near Lake Isabella, California are studied to characterize the internal structure of the fault zone and to understand the development of fault structure...

  13. Fault-tolerant rotary actuator

    SciTech Connect (OSTI)

    Tesar, Delbert

    2006-10-17T23:59:59.000Z

    A fault-tolerant actuator module, in a single containment shell, containing two actuator subsystems that are either asymmetrically or symmetrically laid out is provided. Fault tolerance in the actuators of the present invention is achieved by the employment of dual sets of equal resources. Dual resources are integrated into single modules, with each having the external appearance and functionality of a single set of resources.

  14. rfs Remote File System Softwarepraktikum fur Fortgeschrittene

    E-Print Network [OSTI]

    rfs ­ Remote File System Softwarepraktikum f¨ur Fortgeschrittene Parallele und Verteilte Systeme. Overview 5 2.1. Remote File System Daemon . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2. Remote File System Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.3. Global Remote

  15. Development of Characterization Technology for Fault Zone Hydrology

    E-Print Network [OSTI]

    Karasaki, Kenzi

    2010-01-01T23:59:59.000Z

    TECHNOLOGY FOR FAULT ZONE HYDROLOGY Kenzi Karasaki Lawrencefor characterizing the hydrology of fault zones, recognizingstructure of faults to hydrology, that it still may be

  16. active fault diagnosis: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Harrold, Mary Jean 453 Fault Tolerant Control with Additive Compensation for Faults in an Automotive Damper Physics Websites Summary: Fault Tolerant Control with Additive...

  17. Passive fault current limiting device

    DOE Patents [OSTI]

    Evans, Daniel J. (Wheeling, IL); Cha, Yung S. (Darien, IL)

    1999-01-01T23:59:59.000Z

    A passive current limiting device and isolator is particularly adapted for use at high power levels for limiting excessive currents in a circuit in a fault condition such as an electrical short. The current limiting device comprises a magnetic core wound with two magnetically opposed, parallel connected coils of copper, a high temperature superconductor or other electrically conducting material, and a fault element connected in series with one of the coils. Under normal operating conditions, the magnetic flux density produced by the two coils cancel each other. Under a fault condition, the fault element is triggered to cause an imbalance in the magnetic flux density between the two coils which results in an increase in the impedance in the coils. While the fault element may be a separate current limiter, switch, fuse, bimetal strip or the like, it preferably is a superconductor current limiter conducting one-half of the current load compared to the same limiter wired to carry the total current of the circuit. The major voltage during a fault condition is in the coils wound on the common core in a preferred embodiment.

  18. Passive fault current limiting device

    DOE Patents [OSTI]

    Evans, D.J.; Cha, Y.S.

    1999-04-06T23:59:59.000Z

    A passive current limiting device and isolator is particularly adapted for use at high power levels for limiting excessive currents in a circuit in a fault condition such as an electrical short. The current limiting device comprises a magnetic core wound with two magnetically opposed, parallel connected coils of copper, a high temperature superconductor or other electrically conducting material, and a fault element connected in series with one of the coils. Under normal operating conditions, the magnetic flux density produced by the two coils cancel each other. Under a fault condition, the fault element is triggered to cause an imbalance in the magnetic flux density between the two coils which results in an increase in the impedance in the coils. While the fault element may be a separate current limiter, switch, fuse, bimetal strip or the like, it preferably is a superconductor current limiter conducting one-half of the current load compared to the same limiter wired to carry the total current of the circuit. The major voltage during a fault condition is in the coils wound on the common core in a preferred embodiment. 6 figs.

  19. Impact of Installation Faults on Heat Pump Performance

    SciTech Connect (OSTI)

    Hourahan, Mr. Glenn [Air Conditioning Contractors of America, Arlington, VA; Baxter, Van D [ORNL

    2015-01-01T23:59:59.000Z

    Numerous studies and surveys indicate that typically-installed HVAC equipment operate inefficiently and waste considerable energy due to varied installation errors (faults) such as improper refrigerant charge, incorrect airflow, oversized equipment, and leaky ducts. This article summarizes the results of a large United States (U.S.) experimental/analytical study (U.S. contribution to IEA HPP Annex 36) of the impact that different faults have on the performance of an air-source heat pump (ASHP) in a typical U.S. single-family house. It combines building effects, equipment effects, and climate effects in an evaluation of the faults impact on seasonal energy consumption through simulations of the house/ASHP pump system.

  20. Interpreting Remote Sensing NOx Measurements

    E-Print Network [OSTI]

    Denver, University of

    Interpreting Remote Sensing NOx Measurements Robert Slott, Consultant, Donald Stedman and Saj tailpipe emissions (HC, CO, NOx) are changing with time hUse remote sensing hMeasurements in at least 4 of the year at each location hUniform QC/QA and data reporting Paper # 2001-01-3640 #12;Remote Sensing

  1. Remote Implementation of Quantum Operations

    E-Print Network [OSTI]

    Susana F. Huelga; Martin B. Plenio; Guo-Yong Xiang; Jian Li}and Guang-Can Guo

    2005-09-08T23:59:59.000Z

    Shared entanglement allows, under certain conditions, the remote implementation of quantum operations. We revise and extend recent theoretical results on the remote control of quantum systems as well as experimental results on the remote manipulation of photonic qubits via linear optical elements.

  2. Vacuum Vessel Remote Handling

    E-Print Network [OSTI]

    and Remote Handling 4 Vacuum vessel functions · Plasma vacuum environment · Primary tritium confinement, incl ports 65 tonnes - Weight of torus shielding 100 tonnes · Coolant - Normal Operation Water, Handling 12 Vessel octant subassembly fab. (3) · Octant-to-octant splice joint requires double wall weld

  3. Remote Sensing Ayman F. Habib Introduction

    E-Print Network [OSTI]

    Habib, Ayman

    Remote Sensing Ayman F. Habib 1 Chapter 1 Introduction #12;Remote Sensing Ayman F. Habib 2 Overview · Remote sensing: definition. · Remote sensing versus photogrammetry. · Elements of remote sensing. · Key;Remote Sensing Ayman F. Habib 3 Overview · Acquisition platforms: ­ Historical overview. ­ Terrestrial

  4. Condition Assessment and Fault Prognostics of Microelectromechanical Systems

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    monitoring, Condition assessment, Fault detection, Fault diagnostics, Fault prognostics. Corresponding, batteries, etc.) to complete machines (wind turbines, electrical motors, machining tools, etc.). SeveralCondition Assessment and Fault Prognostics of Microelectromechanical Systems K. Medjaher , H. Skima

  5. Evaluation of the location and recency of faulting near prospective surface facilities in Midway Valley, Nye County, Nevada

    SciTech Connect (OSTI)

    Swan, F.H.; Wesling, J.R.; Angell, M.M.; Thomas, A.P.; Whitney, J.W.; Gibson, J.D.

    2002-01-17T23:59:59.000Z

    Evaluation of surface faulting that may pose a hazard to prospective surface facilities is an important element of the tectonic studies for the potential Yucca Mountain high-level radioactive waste repository in southwestern Nevada. For this purpose, a program of detailed geologic mapping and trenching was done to obtain surface and near-surface geologic data that are essential for determining the location and recency of faults at a prospective surface-facilities site located east of Exile Hill in Midway Valley, near the eastern base of Yucca Mountain. The dominant tectonic features in the Midway Valley area are the north- to northeast-trending, west-dipping normal faults that bound the Midway Valley structural block-the Bow Ridge fault on the west side of Exile Hill and the Paint-brush Canyon fault on the east side of the valley. Trenching of Quaternary sediments has exposed evidence of displacements, which demonstrate that these block-bounding faults repeatedly ruptured the surface during the middle to late Quaternary. Geologic mapping, subsurface borehole and geophysical data, and the results of trenching activities indicate the presence of north- to northeast-trending faults and northwest-trending faults in Tertiary volcanic rocks beneath alluvial and colluvial sediments near the prospective surface-facilities site. North to northeast-trending faults include the Exile Hill fault along the eastern base of Exile Hill and faults to the east beneath the surficial deposits of Midway Valley. These faults have no geomorphic expression, but two north- to northeast-trending zones of fractures exposed in excavated profiles of middle to late Pleistocene deposits at the prospective surface-facilities site appear to be associated with these faults. Northwest-trending faults include the West Portal and East Portal faults, but no disruption of Quaternary deposits by these faults is evident. The western zone of fractures is associated with the Exile Hill fault. The eastern zone of fractures is within Quaternary alluvial sediments, but no bedrock was encountered in trenches and soil pits in this part of the prospective surface facilities site; thus, the direct association of this zone with one or more bedrock faults is uncertain. No displacement of lithologic contacts and soil horizons could be detected in the fractured Quaternary deposits. The results of these investigations imply the absence of any appreciable late Quaternary faulting activity at the prospective surface-facilities site.

  6. Remote Sensing Laboratory - RSL

    ScienceCinema (OSTI)

    None

    2015-01-09T23:59:59.000Z

    One of the primary resources supporting homeland security is the Remote Sensing Laboratory, or RSL. The Laboratory creates advanced technologies for emergency response operations, radiological incident response, and other remote sensing activities. RSL emergency response teams are on call 24-hours a day, and maintain the capability to deploy domestically and internationally in response to threats involving the loss, theft, or release of nuclear or radioactive material. Such incidents might include Nuclear Power Plant accidents, terrorist incidents involving nuclear or radiological materials, NASA launches, and transportation accidents involving nuclear materials. Working with the US Department of Homeland Security, RSL personnel equip, maintain, and conduct training on the mobile detection deployment unit, to provide nuclear radiological security at major national events such as the super bowl, the Indianapolis 500, New Year's Eve celebrations, presidential inaugurations, international meetings and conferences, just about any event where large numbers of people will gather.

  7. Remote Sensing Laboratory - RSL

    SciTech Connect (OSTI)

    None

    2014-11-06T23:59:59.000Z

    One of the primary resources supporting homeland security is the Remote Sensing Laboratory, or RSL. The Laboratory creates advanced technologies for emergency response operations, radiological incident response, and other remote sensing activities. RSL emergency response teams are on call 24-hours a day, and maintain the capability to deploy domestically and internationally in response to threats involving the loss, theft, or release of nuclear or radioactive material. Such incidents might include Nuclear Power Plant accidents, terrorist incidents involving nuclear or radiological materials, NASA launches, and transportation accidents involving nuclear materials. Working with the US Department of Homeland Security, RSL personnel equip, maintain, and conduct training on the mobile detection deployment unit, to provide nuclear radiological security at major national events such as the super bowl, the Indianapolis 500, New Year's Eve celebrations, presidential inaugurations, international meetings and conferences, just about any event where large numbers of people will gather.

  8. Remote switch actuator

    DOE Patents [OSTI]

    Haas, Edwin Gerard; Beauman, Ronald; Palo, Jr., Stefan

    2013-01-29T23:59:59.000Z

    The invention provides a device and method for actuating electrical switches remotely. The device is removably attached to the switch and is actuated through the transfer of a user's force. The user is able to remain physically removed from the switch site obviating need for protective equipment. The device and method allow rapid, safe actuation of high-voltage or high-current carrying electrical switches or circuit breakers.

  9. Sensor Fault Detection and Isolation System

    E-Print Network [OSTI]

    Yang, Cheng-Ken

    2014-08-01T23:59:59.000Z

    The purpose of this research is to develop a Fault Detection and Isolation (FDI) system which is capable to diagnosis multiple sensor faults in nonlinear cases. In order to lead this study closer to real world applications in oil industries...

  10. A Rectilinear-Monotone Polygonal Fault Block Model for Fault-Tolerant Minimal Routing

    E-Print Network [OSTI]

    Wang, Dajin

    ]. In rectangular model, all faulty nodes are grouped in dis- jointed, rectangular areas, called fault blocksA Rectilinear-Monotone Polygonal Fault Block Model for Fault-Tolerant Minimal Routing in Mesh Dajin Wang, Member, IEEE Abstract--We propose a new fault block model, Minimal-Connected-Component (MCC

  11. Remote repair appliance

    DOE Patents [OSTI]

    Heumann, F.K.; Wilkinson, J.C.; Wooding, D.R.

    1997-12-16T23:59:59.000Z

    A remote appliance for supporting a tool for performing work at a work site on a substantially circular bore of a work piece and for providing video signals of the work site to a remote monitor comprises: a base plate having an inner face and an outer face; a plurality of rollers, wherein each roller is rotatably and adjustably attached to the inner face of the base plate and positioned to roll against the bore of the work piece when the base plate is positioned against the mouth of the bore such that the appliance may be rotated about the bore in a plane substantially parallel to the base plate; a tool holding means for supporting the tool, the tool holding means being adjustably attached to the outer face of the base plate such that the working end of the tool is positioned on the inner face side of the base plate; a camera for providing video signals of the work site to the remote monitor; and a camera holding means for supporting the camera on the inner face side of the base plate, the camera holding means being adjustably attached to the outer face of the base plate. In a preferred embodiment, roller guards are provided to protect the rollers from debris and a bore guard is provided to protect the bore from wear by the rollers and damage from debris. 5 figs.

  12. Remote repair appliance

    DOE Patents [OSTI]

    Heumann, Frederick K. (Ballston Spa, NY); Wilkinson, Jay C. (Ballston Spa, NY); Wooding, David R. (Saratoga Springs, NY)

    1997-01-01T23:59:59.000Z

    A remote appliance for supporting a tool for performing work at a worksite on a substantially circular bore of a workpiece and for providing video signals of the worksite to a remote monitor comprising: a baseplate having an inner face and an outer face; a plurality of rollers, wherein each roller is rotatably and adjustably attached to the inner face of the baseplate and positioned to roll against the bore of the workpiece when the baseplate is positioned against the mouth of the bore such that the appliance may be rotated about the bore in a plane substantially parallel to the baseplate; a tool holding means for supporting the tool, the tool holding means being adjustably attached to the outer face of the baseplate such that the working end of the tool is positioned on the inner face side of the baseplate; a camera for providing video signals of the worksite to the remote monitor; and a camera holding means for supporting the camera on the inner face side of the baseplate, the camera holding means being adjustably attached to the outer face of the baseplate. In a preferred embodiment, roller guards are provided to protect the rollers from debris and a bore guard is provided to protect the bore from wear by the rollers and damage from debris.

  13. Bulletin of the Seismological Society of America, Vol. 95, No. 2, pp. 739744, April 2005, doi: 10.1785/0120040126 Neotectonics of the Offshore Oak Ridge Fault near Ventura,

    E-Print Network [OSTI]

    : 10.1785/0120040126 Neotectonics of the Offshore Oak Ridge Fault near Ventura, Southern California is a large-offset, south-dipping reverse fault that forms the south boundary of the Ventura Basin in southern California. Previous research indicates that the Oak Ridge fault south of the town of Ventura has been

  14. Method and system for controlling a permanent magnet machine during fault conditions

    DOE Patents [OSTI]

    Krefta, Ronald John; Walters, James E.; Gunawan, Fani S.

    2004-05-25T23:59:59.000Z

    Method and system for controlling a permanent magnet machine driven by an inverter is provided. The method allows for monitoring a signal indicative of a fault condition. The method further allows for generating during the fault condition a respective signal configured to maintain a field weakening current even though electrical power from an energy source is absent during said fault condition. The level of the maintained field-weakening current enables the machine to operate in a safe mode so that the inverter is protected from excess voltage.

  15. Method and system for early detection of incipient faults in electric motors

    DOE Patents [OSTI]

    Parlos, Alexander G; Kim, Kyusung

    2003-07-08T23:59:59.000Z

    A method and system for early detection of incipient faults in an electric motor are disclosed. First, current and voltage values for one or more phases of the electric motor are measured during motor operations. A set of current predictions is then determined via a neural network-based current predictor based on the measured voltage values and an estimate of motor speed values of the electric motor. Next, a set of residuals is generated by combining the set of current predictions with the measured current values. A set of fault indicators is subsequently computed from the set of residuals and the measured current values. Finally, a determination is made as to whether or not there is an incipient electrical, mechanical, and/or electromechanical fault occurring based on the comparison result of the set of fault indicators and a set of predetermined baseline values.

  16. FAULT & COORDINATION STUDY FOR T PLANT COMPLEX

    SciTech Connect (OSTI)

    MCDONALD, G.P.; BOYD-BODIAU, E.A.

    2004-09-01T23:59:59.000Z

    A short circuit study is performed to determine the maximum fault current that the system protective devices, transformers, and interconnections would he subject to in event of a three phase, phase-to-phase, or phase-to-ground fault. Generally, the short circuit study provides the worst case fault current levels at each bus or connection point of the system.

  17. High temperature superconducting fault current limiter

    DOE Patents [OSTI]

    Hull, J.R.

    1997-02-04T23:59:59.000Z

    A fault current limiter for an electrical circuit is disclosed. The fault current limiter includes a high temperature superconductor in the electrical circuit. The high temperature superconductor is cooled below its critical temperature to maintain the superconducting electrical properties during operation as the fault current limiter. 15 figs.

  18. High temperature superconducting fault current limiter

    DOE Patents [OSTI]

    Hull, John R. (Hinsdale, IL)

    1997-01-01T23:59:59.000Z

    A fault current limiter (10) for an electrical circuit (14). The fault current limiter (10) includes a high temperature superconductor (12) in the electrical circuit (14). The high temperature superconductor (12) is cooled below its critical temperature to maintain the superconducting electrical properties during operation as the fault current limiter (10).

  19. Using Fault Model Enforcement to Improve Availability

    E-Print Network [OSTI]

    instead that a new approach, called fault model enforcement, that maps actual faults to expected faults on a constellation of interconnected systems--a typical example is cluster-based systems [4]. Traditional database centers around a set of closely guarded racks and data closets woven together by intricate networks

  20. Using Fault Model Enforcement to Improve Availability

    E-Print Network [OSTI]

    Martin, Richard P.

    that a new approach, called fault model enforcement, that maps actual faults to expected faults on a constellation of interconnected systems--a typical example is cluster-based systems [4]. Traditional database centers around a set of closely guarded racks and data closets woven together by intricate networks

  1. Remote state preparation: arbitrary remote control of photon polarization Nicholas A. Peters,1

    E-Print Network [OSTI]

    Kwiat, Paul

    Remote state preparation: arbitrary remote control of photon polarization Nicholas A. Peters,1 University, Kirksville, MO 63501 (Dated: October 22, 2004) We experimentally demonstrate the first remote, we remotely prepare arbitrary states at two wavelengths. Further, we derive theoretical bounds

  2. Thrust faulting in Temblor Range, Kern County, California

    SciTech Connect (OSTI)

    Simonson, R.R.

    1991-02-01T23:59:59.000Z

    Surface and subsurface studies confirm the presence of overthrusting in the Temblor Range between Gonyer Canyon and Recruit Pass. In the subsurface, three wells have penetrated the Cree fault, the Hudbay Cree' No. 1 (7,300 ft), the Frantzen Oil Company Cree' No. 1 (5,865 ft) and the Arco Cree Fee' 1A well (5,915 ft). Below the fault, 25 to 35{degree} of westerly dips on the west flank of the sub-thrust Phelps anticline are encountered. The McDonald section below the fault is comprised of siliceous fractured shale which contains live oil and gas showings. A drill-stem test of the interval from 8,247 to 8,510 ft in the Frantzen well resulted in a recovery of 1,200 ft clean 34{degree} oil and 40 MCF per day gas. The shut in pressure was 3,430 lb, which is a normal hydrostatic pressure common to the producing structures in the southern San Joaquin Valley. The equivalent of this interval has produced over 7,000 bbl of oil in the Arco Cree' 1A well. The Arco Cree Fee' No. 1A well crossed the axis of the Phelps Anticline as indicated by good dipmeter and bottomed in Lower Zemorrian at 14,512 ft total depth. This well was not drilled deep enough to reach the Point of Rocks Sand and did not test the gas showings in the lower Miocene section. In the Gonyer Canyon area, subsurface evidence indicated conditions are similar to those in the Cree area because a large structure is present below a thrust fault. It is believed that significant accumulations will be found beneath thrust faults in the eastern part of the Temblor Range where conditions are similar to those that were instrumental in forming fields such as the Elk Hills, B. V. Hills, Belgian Anticline and others.

  3. Cell boundary fault detection system

    DOE Patents [OSTI]

    Archer, Charles Jens (Rochester, MN); Pinnow, Kurt Walter (Rochester, MN); Ratterman, Joseph D. (Rochester, MN); Smith, Brian Edward (Rochester, MN)

    2011-04-19T23:59:59.000Z

    An apparatus and program product determine a nodal fault along the boundary, or face, of a computing cell. Nodes on adjacent cell boundaries communicate with each other, and the communications are analyzed to determine if a node or connection is faulty.

  4. Software Fault Diagnosis Peter Zoeteweij

    E-Print Network [OSTI]

    Zoeteweij, Peter

    Lab, Faculty of Electrical Engineering, Mathematics, and Computer Science, Delft University-to-day basis is constantly growing. Combined with a practically constant rate of faults per line of code in the software development cycle, which aim at exposing such discrepancies. In this context, automated diagnosis

  5. REMOTE AND RURAL ENTERPRISE (RARE)

    E-Print Network [OSTI]

    Viglas, Anastasios

    in remote central Australia is establishing a commercial aquaponics enterprise, a social entrepreneur, hospitality and horticulture. The current focus is on a commercial aquaponics enterprise and a cultural

  6. Development of a bridge fault extractor tool

    E-Print Network [OSTI]

    Bhat, Nandan D.

    2005-02-17T23:59:59.000Z

    as interlayer faults. An example of an intralayer fault is a bridge between two adjacent metal1 lines. An example of an interlayer fault is a short between overlapping polysilicon and metal1 lines. The rest of this thesis is organized as follows: Chapter 2... between two adjacent 6 metal1 lines. An example of an interlayer fault is a short between overlapping polysilicon and metal1 lines. A recent survey of fault extractors describes their different features [15]. Some tools such as VLASIC [16] attempt...

  7. Remote Sensor Placement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Technical s o Freiberge s 3 c/) ReleaseRemote AccessSpectrum

  8. A High shear stress segment along the San Andreas Fault: Inferences based on near-field stress direction and stress magnitude observations in the Carrizo Plain Area

    SciTech Connect (OSTI)

    Castillo, D. A., [Department of Geology and Geophysics, University of Adelaide (Australia); Younker, L.W. [Lawrence Livermore National Lab., CA (United States)

    1997-01-30T23:59:59.000Z

    Nearly 200 new in-situ determinations of stress directions and stress magnitudes near the Carrizo plain segment of the San Andreas fault indicate a marked change in stress state occurring within 20 km of this principal transform plate boundary. A natural consequence of this stress transition is that if the observed near-field ``fault-oblique`` stress directions are representative of the fault stress state, the Mohr-Coulomb shear stresses resolved on San Andreas sub-parallel planes are substantially greater than previously inferred based on fault-normal compression. Although the directional stress data and near-hydrostatic pore pressures, which exist within 15 km of the fault, support a high shear stress environment near the fault, appealing to elevated pore pressures in the fault zone (Byerlee-Rice Model) merely enhances the likelihood of shear failure. These near-field stress observations raise important questions regarding what previous stress observations have actually been measuring. The ``fault-normal`` stress direction measured out to 70 km from the fault can be interpreted as representing a comparable depth average shear strength of the principal plate boundary. Stress measurements closer to the fault reflect a shallower depth-average representation of the fault zone shear strength. If this is true, only stress observations at fault distances comparable to the seismogenic depth will be representative of the fault zone shear strength. This is consistent with results from dislocation monitoring where there is pronounced shear stress accumulation out to 20 km of the fault as a result of aseismic slip within the lower crust loading the upper locked section. Beyond about 20 km, the shear stress resolved on San Andreas fault-parallel planes becomes negligible. 65 refs., 15 figs.

  9. Remote-State Prparation eines einzelnen Atoms

    E-Print Network [OSTI]

    Weinfurter, Harald

    Remote-State Präparation eines einzelnen Atoms Diplomarbeit am Department für Physik der Ludwig . . . . . . . . . . . . . . . . . . . . . 8 1.3.3 Remote-State-Präparation . . . . . . . . . . . . . . . . . . . . . 11 1.3.4 Zusammenfassung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 3 Remote-State-Präparation 31 3.1 Einleitung

  10. Remotely operated pipe connector

    DOE Patents [OSTI]

    Josefiak, Leonard J. (Scotia, NY); Cramer, Charles E. (Guilderford, NY)

    1988-01-01T23:59:59.000Z

    An apparatus for remotely assembling and disassembling a Graylock type coctor between a pipe and a closure for the pipe includes a base and a receptacle on the base for the closure. The pipe is moved into position vertically above the closure by a suitable positioning device such that the flange on the pipe is immediately adjacent and concentric with the flange on the closure. A moving device then moves two semicircular collars from a position free of the closure to a position such that the interior cam groove of each collar contacts the two flanges. Finally, a tensioning device automatically allows remote tightening and loosening of a nut and bolt assembly on each side of the collar to cause a seal ring located between the flanges to be compressed and to seal the closure. Release of the pipe and the connector is accomplished in the reverse order. Preferably, the nut and bolt assembly includes an elongate shaft portion on which a removable sleeve is located.

  11. The detection of high impedance faults using random fault behavior

    E-Print Network [OSTI]

    Carswell, Patrick Wayne

    1988-01-01T23:59:59.000Z

    In response to an Electric Power Research Institute (EPRI) request for pro- posed solutions for the detection of high impedance faults, the Hughes Aircraft Corporation developed a detection technique based solely on the level of the third harmonic current... for proposed solutions from EPRI that brought the Hughes technique, Power Technologies Incorporated (PTI) proposed a technique which statistically monitors the first, third, and fifth harmonics of current to make a, determination as to the presence of a high...

  12. Remote geologic structural analysis of Yucca Flat

    SciTech Connect (OSTI)

    Foley, M.G.; Heasler, P.G.; Hoover, K.A. (Pacific Northwest Lab., Richland, WA (United States)); Rynes, N.J. (Northern Illinois Univ., De Kalb, IL (United States)); Thiessen, R.L.; Alfaro, J.L. (Washington State Univ., Pullman, WA (United States))

    1991-12-01T23:59:59.000Z

    The Remote Geologic Analysis (RGA) system was developed by Pacific Northwest Laboratory (PNL) to identify crustal structures that may affect seismic wave propagation from nuclear tests. Using automated methods, the RGA system identifies all valleys in a digital elevation model (DEM), fits three-dimensional vectors to valley bottoms, and catalogs all potential fracture or fault planes defined by coplanar pairs of valley vectors. The system generates a cluster hierarchy of planar features having greater-than-random density that may represent areas of anomalous topography manifesting structural control of erosional drainage development. Because RGA uses computer methods to identify zones of hypothesized control of topography, ground truth using a well-characterized test site was critical in our evaluation of RGA's characterization of inaccessible test sites for seismic verification studies. Therefore, we applied RGA to a study area centered on Yucca Flat at the Nevada Test Site (NTS) and compared our results with both mapped geology and geologic structures and with seismic yield-magnitude models. This is the final report of PNL's RGA development project for peer review within the US Department of Energy Office of Arms Control (OAC) seismic-verification community. In this report, we discuss the Yucca Flat study area, the analytical basis of the RGA system and its application to Yucca Flat, the results of the analysis, and the relation of the analytical results to known topography, geology, and geologic structures. 41 refs., 39 figs., 2 tabs.

  13. Remote geologic structural analysis of Yucca Flat

    SciTech Connect (OSTI)

    Foley, M.G.; Heasler, P.G.; Hoover, K.A. [Pacific Northwest Lab., Richland, WA (United States); Rynes, N.J. [Northern Illinois Univ., De Kalb, IL (United States); Thiessen, R.L.; Alfaro, J.L. [Washington State Univ., Pullman, WA (United States)

    1991-12-01T23:59:59.000Z

    The Remote Geologic Analysis (RGA) system was developed by Pacific Northwest Laboratory (PNL) to identify crustal structures that may affect seismic wave propagation from nuclear tests. Using automated methods, the RGA system identifies all valleys in a digital elevation model (DEM), fits three-dimensional vectors to valley bottoms, and catalogs all potential fracture or fault planes defined by coplanar pairs of valley vectors. The system generates a cluster hierarchy of planar features having greater-than-random density that may represent areas of anomalous topography manifesting structural control of erosional drainage development. Because RGA uses computer methods to identify zones of hypothesized control of topography, ground truth using a well-characterized test site was critical in our evaluation of RGA`s characterization of inaccessible test sites for seismic verification studies. Therefore, we applied RGA to a study area centered on Yucca Flat at the Nevada Test Site (NTS) and compared our results with both mapped geology and geologic structures and with seismic yield-magnitude models. This is the final report of PNL`s RGA development project for peer review within the US Department of Energy Office of Arms Control (OAC) seismic-verification community. In this report, we discuss the Yucca Flat study area, the analytical basis of the RGA system and its application to Yucca Flat, the results of the analysis, and the relation of the analytical results to known topography, geology, and geologic structures. 41 refs., 39 figs., 2 tabs.

  14. Development of secondary faults between en echelon, oblique-slip faults: examples from basement controlled, small-fault systems in the Llano Uplift of central Texas

    E-Print Network [OSTI]

    Hedgcoxe, Howard Reiffert

    1987-01-01T23:59:59.000Z

    correspond to the NE trending set of faults and the secondary antithetic faults corre- spond to the N to NNE set (Figure 12). Fractures, represented by the dashed lines in Figure 12, occur in direct association with the primary and secondary faults...DEVELOPMENT OF SECONDARY FAULTS BETWEEN EN ECHELON, OBLIQUE-SLIP FAULTS: EXAMPLES FROM BASEMENT CONTROLLED, SMALL-FAULT SYSTEMS IN THE LLANO UPLIFT OF CENTRAL TEXAS A Thesis by HOWARD REIFFERT HEDGCOXE Submitted to the Graduate College...

  15. Three-dimensional numerical modeling of the influence of faults on groundwater flow at Yucca Mountain, Nevada

    SciTech Connect (OSTI)

    Cohen, Andrew J.B.

    1999-06-01T23:59:59.000Z

    Numerical simulations of groundwater flow at Yucca Mountain, Nevada are used to investigate how the faulted hydrogeologic structure influences groundwater flow from a proposed high-level nuclear waste repository. Simulations are performed using a 3-D model that has a unique grid block discretization to accurately represent the faulted geologic units, which have variable thicknesses and orientations. Irregular grid blocks enable explicit representation of these features. Each hydrogeologic layer is discretized into a single layer of irregular and dipping grid blocks, and faults are discretized such that they are laterally continuous and displacement varies along strike. In addition, the presence of altered fault zones is explicitly modeled, as appropriate. The model has 23 layers and 11 faults, and approximately 57,000 grid blocks and 200,000 grid block connections. In the past, field measurement of upward vertical head gradients and high water table temperatures near faults were interpreted as indicators of upwelling from a deep carbonate aquifer. Simulations show, however, that these features can be readily explained by the geometry of hydrogeologic layers, the variability of layer permeabilities and thermal conductivities, and by the presence of permeable fault zones or faults with displacement only. In addition, a moderate water table gradient can result from fault displacement or a laterally continuous low permeability fault zone, but not from a high permeability fault zone, as others postulated earlier. Large-scale macrodispersion results from the vertical and lateral diversion of flow near the contact of high and low permeability layers at faults, and from upward flow within high permeability fault zones. Conversely, large-scale channeling can occur due to groundwater flow into areas with minimal fault displacement. Contaminants originating at the water table can flow in a direction significantly different than that of the water table gradient, and isolated zones of contaminants will occur at the water table downgradient. This behavior is not predicted by traditional models of contaminant transport. In addition, the influence of a particular type of fault cannot be generalized; depending on the location where contaminants enter the saturated zone, faults may either enhance of inhibit vertical dispersion.

  16. Remote sensing for wind power potential: a prospector's handbook

    SciTech Connect (OSTI)

    Wade, J.E.; Maule, P.A.; Bodvarsson, G.; Rosenfeld, C.L.; Woolley, S.G.; McClenahan, M.R.

    1983-02-01T23:59:59.000Z

    Remote sensing can aid in identifying and locating indicators of wind power potential from the terrestrial, marine, and atmospheric environments (i.e.: wind-deformed trees, white caps, and areas of thermal flux). It is not considered as a tool for determining wind power potential. A wide variety of remotely sensed evidence is described in terms of the scale at which evidence of wind power can be identified, and the appropriate remote sensors for finding such evidence. Remote sensing can be used for regional area prospecting using small-scale imagery. The information from such small-scale imagery is most often qualitative, and if it is transitory, examination of a number of images to verify presistence of the feature may be required. However, this evidence will allow rapid screening of a large area. Medium-scale imagery provides a better picture of the evidence obtained from small-scale imagery. At this level it is best to use existing imagery. Criteria relating to land use, accessibility, and proximity of candidate sites to nearby transmission lines can also be effectively evaluated from medium-scale imagery. Large-scale imagery provides the most quantitative evidence of the strength of wind. Wind-deformed trees can be identified at a large number of sites using only a few hours in locally chartered aircraft. A handheld 35mm camera can adequately document any evidence of wind. Three case studies that employ remote sensing prospecting techniques are described. Based on remotely sensed evidence, the wind power potential in three geographically and climatically diverse areas of the United States is estimated, and the estimates are compared to actual wind data in those regions. In addition, the cost of each survey is discussed. The results indicate that remote sensing for wind power potential is a quick, cost effective, and fairly reliable method for screening large areas for wind power potential.

  17. Fault prophet : a fault injection tool for large scale computer systems

    E-Print Network [OSTI]

    Tchwella, Tal

    2014-01-01T23:59:59.000Z

    In this thesis, I designed and implemented a fault injection tool, to study the impact of soft errors for large scale systems. Fault injection is used as a mechanism to simulate soft errors, measure the output variability ...

  18. Realistic fault modeling and quality test generation of combined delay faults 

    E-Print Network [OSTI]

    Thadhlani, Ajaykumar A

    2001-01-01T23:59:59.000Z

    With increasing operating speed and shrinking technology, timing defects in integrated circuits are becoming increasingly important. The well established stuck-at-fault model is not sufficient because it is a static fault ...

  19. Collateral damage: Evolution with displacement of fracture distribution and secondary fault strands in fault damage zones

    E-Print Network [OSTI]

    Savage, Heather M.; Brodsky, Emily E.

    2011-01-01T23:59:59.000Z

    E. McCallum (1999), Reservoir damage around faults: OutcropSkar (2005), Controls on damage zone asymmetry of a normal2007), The evolution of the damage zone with fault growth in

  20. The effects of lithology and initial fault angle in physical models of fault-propagation folds

    E-Print Network [OSTI]

    McLain, Christopher Thomas

    2001-01-01T23:59:59.000Z

    Experimentally deformed physical rock models are used to examine the effects of changing mechanical stratigraphy and initial fault angle on the development of fault-propagation folds over a flat-ramp-flat thrust geometry. This study also...

  1. Collateral damage: Evolution with displacement of fracture distribution and secondary fault strands in fault damage zones

    E-Print Network [OSTI]

    Savage, Heather M.; Brodsky, Emily E.

    2011-01-01T23:59:59.000Z

    8 m fault 14 m fault Lonewolf Wadi Araba Carboneras Caletasiltstone, conglomerate Wadi As Sir Limestone gneiss schistFaulkner et al. , 2003], and Wadi Araba [Du Bernard et al. ,

  2. Fault-tolerant dynamic task graph scheduling

    SciTech Connect (OSTI)

    Kurt, Mehmet C.; Krishnamoorthy, Sriram; Agrawal, Kunal; Agrawal, Gagan

    2014-11-16T23:59:59.000Z

    In this paper, we present an approach to fault tolerant execution of dynamic task graphs scheduled using work stealing. In particular, we focus on selective and localized recovery of tasks in the presence of soft faults. We elicit from the user the basic task graph structure in terms of successor and predecessor relationships. The work stealing-based algorithm to schedule such a task graph is augmented to enable recovery when the data and meta-data associated with a task get corrupted. We use this redundancy, and the knowledge of the task graph structure, to selectively recover from faults with low space and time overheads. We show that the fault tolerant design retains the essential properties of the underlying work stealing-based task scheduling algorithm, and that the fault tolerant execution is asymptotically optimal when task re-execution is taken into account. Experimental evaluation demonstrates the low cost of recovery under various fault scenarios.

  3. Applications of Remote Sensing to Study Climate Change

    E-Print Network [OSTI]

    Gilbes, Fernando

    to develop image processing techniques that later were used with Landsat data. #12;CIVILIAN SATELLITES 1970's was very much appreciated. #12;THE CUBAN MISSILE CRISIS 1962 · In fall 1962, reports indicated by current remote sensors is the electromagnetic energy emanating from the object of interest

  4. Thermal indicator for wells

    DOE Patents [OSTI]

    Gaven, Jr., Joseph V. (Oakton, VA); Bak, Chan S. (Newbury Park, CA)

    1983-01-01T23:59:59.000Z

    Minute durable plate-like thermal indicators are employed for precision measuring static and dynamic temperatures of well drilling fluids. The indicators are small enough and sufficiently durable to be circulated in the well with drilling fluids during the drilling operation. The indicators include a heat resistant indicating layer, a coacting meltable solid component and a retainer body which serves to unitize each indicator and which may carry permanent indicator identifying indicia. The indicators are recovered from the drilling fluid at ground level by known techniques.

  5. Detachment Faulting & Geothermal Resources - Pearl Hot Spring...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Faulting & Geothermal Resources - Pearl Hot Spring, NV Conducting a 3D Converted Shear Wave Project to Reduce Exploration Risk at Wister, CA Crump Geyser: High Precision...

  6. Towards Fault-Tolerant Digital Microfluidic Lab-on-Chip: Defects, Fault Modeling, Testing, and Reconfiguration

    E-Print Network [OSTI]

    Chakrabarty, Krishnendu

    Towards Fault-Tolerant Digital Microfluidic Lab-on-Chip: Defects, Fault Modeling, Testing, NC 27708, USA Abstract Dependability is an important attribute for microfluidic lab-on-chip devices microfluidic lab-on-chip systems. Defects are related to logical fault models that can be viewed not only

  7. Contribution of Identified Active Faults to Near Fault Seismic Hazard in the Flinders Ranges

    E-Print Network [OSTI]

    Sandiford, Mike

    Somerville1 , Peggy Quijada1 , Hong Kie Thio1 , Mike Sandiford2 and Mark Quigley2 1. URS Corporation estimates of fault slip rate from Quigley et al. (2006) to quantify the seismic activity rate on the faults of these models was used in conjunction with the active fault model. Quigley et al. (2006) identified a system

  8. A fault location approach for fuzzy fault section estimation on radial distribution feeders

    E-Print Network [OSTI]

    Andoh, Kwame Sarpong

    2000-01-01T23:59:59.000Z

    was involved in the fault was evaluated using the event-phase possibility values and line section phase topology information. The fault distance algorithm was used to eliminate sections of the feeder that were not likely to be possible faulted section...

  9. Shallow faults mapped with seismic reflections: Lost River Fault, Idaho

    E-Print Network [OSTI]

    Mubarik, Ali; Miller, Richard D.; Steeples, Don W.

    1991-09-01T23:59:59.000Z

    stations 132 and 160. Total bedrock dis?lace- ment interpreted along this seismic survey line is approxa- mately 6 m, representing 4 to 6 times more displacement than is observed on either the common offset refraction section or at the surface..., vol. A, U.S. Geological Survey Open-file Report 85-290, 182-194, 1985. Crone, A. J., and M. N. Macbette, Surface faulting accompa- nying the Borah Peak earthquake, central Idaho, Geology, 12, 664-667, 1984. Crone, A. J., M. N. Macbette, M. G...

  10. Accurate resistive bridge fault modeling, simulation, and test generation 

    E-Print Network [OSTI]

    Sar-Dessai, Vijay Ramesh

    1999-01-01T23:59:59.000Z

    Resistive bridging faults in CMOS combinational circuits are studied in this work. Bridging faults are modeled using HSPICE circuit simulation of the various types of bridging faults that can occur in CMOS combinational ...

  11. Earthquake behavior and structure of oceanic transform faults

    E-Print Network [OSTI]

    Roland, Emily Carlson

    2012-01-01T23:59:59.000Z

    Oceanic transform faults that accommodate strain at mid-ocean ridge offsets represent a unique environment for studying fault mechanics. Here, I use seismic observations and models to explore how fault structure affects ...

  12. Low-cost motor drive embedded fault diagnosis systems

    E-Print Network [OSTI]

    Akin, Bilal

    2009-05-15T23:59:59.000Z

    Electric motors are used widely in industrial manufacturing plants. Bearing faults, insulation faults, and rotor faults are the major causes of electric motor failures. Based on the line current analysis, this dissertation mainly deals with the low...

  13. Accurate resistive bridge fault modeling, simulation, and test generation

    E-Print Network [OSTI]

    Sar-Dessai, Vijay Ramesh

    1999-01-01T23:59:59.000Z

    Resistive bridging faults in CMOS combinational circuits are studied in this work. Bridging faults are modeled using HSPICE circuit simulation of the various types of bridging faults that can occur in CMOS combinational circuits. The results...

  14. Remote Method Invocations 13.1 Introduction

    E-Print Network [OSTI]

    Garg, Vijay

    Chapter 13 Remote Method Invocations 13.1 Introduction A popular way of developing distributed applications is based on the concept of remote procedure calls (RPC's) or remote method invocations (RMI's). Here the main idea is that a process can make calls to methods of a remote object as if it were

  15. Remote Sensing Ayman F. Habib Image Classification

    E-Print Network [OSTI]

    Habib, Ayman

    1 Remote Sensing Ayman F. Habib 1 Chapter 6 Image Classification Remote Sensing Ayman F. Habib 2. ­ Unsupervised classification. · Accuracy assessment. #12;2 Remote Sensing Ayman F. Habib 3 Image Classification of image pixels is based on their digital numbers/grey values in one or more spectral bands. Remote Sensing

  16. Remote Sensing Ayman F. Habib Radiometric Processing of Remote Sensing Data

    E-Print Network [OSTI]

    Habib, Ayman

    Remote Sensing Ayman F. Habib 1 Chapter 4 Radiometric Processing of Remote Sensing Data #12;Remote. · Noise removal. · Point and edge detection. ­ Frequency domain. #12;Remote Sensing Ayman F. Habib 3 Radiometric Calibration #12;Remote Sensing Ayman F. Habib 4 Recorded Digital Numbers (DN) · Recorded grey

  17. Steps toward fault-tolerant quantum chemistry.

    SciTech Connect (OSTI)

    Taube, Andrew Garvin

    2010-05-01T23:59:59.000Z

    Developing quantum chemistry programs on the coming generation of exascale computers will be a difficult task. The programs will need to be fault-tolerant and minimize the use of global operations. This work explores the use a task-based model that uses a data-centric approach to allocate work to different processes as it applies to quantum chemistry. After introducing the key problems that appear when trying to parallelize a complicated quantum chemistry method such as coupled-cluster theory, we discuss the implications of that model as it pertains to the computational kernel of a coupled-cluster program - matrix multiplication. Also, we discuss the extensions that would required to build a full coupled-cluster program using the task-based model. Current programming models for high-performance computing are fault-intolerant and use global operations. Those properties are unsustainable as computers scale to millions of CPUs; instead one must recognize that these systems will be hierarchical in structure, prone to constant faults, and global operations will be infeasible. The FAST-OS HARE project is introducing a scale-free computing model to address these issues. This model is hierarchical and fault-tolerant by design, allows for the clean overlap of computation and communication, reducing the network load, does not require checkpointing, and avoids the complexity of many HPC runtimes. Development of an algorithm within this model requires a change in focus from imperative programming to a data-centric approach. Quantum chemistry (QC) algorithms, in particular electronic structure methods, are an ideal test bed for this computing model. These methods describe the distribution of electrons in a molecule, which determine the properties of the molecule. The computational cost of these methods is high, scaling quartically or higher in the size of the molecule, which is why QC applications are major users of HPC resources. The complexity of these algorithms means that MPI alone is insufficient to achieve parallel scaling; QC developers have been forced to use alternative approaches to achieve scalability and would be receptive to radical shifts in the programming paradigm. Initial work in adapting the simplest QC method, Hartree-Fock, to this the new programming model indicates that the approach is beneficial for QC applications. However, the advantages to being able to scale to exascale computers are greatest for the computationally most expensive algorithms; within QC these are the high-accuracy coupled-cluster (CC) methods. Parallel coupledcluster programs are available, however they are based on the conventional MPI paradigm. Much of the effort is spent handling the complicated data dependencies between the various processors, especially as the size of the problem becomes large. The current paradigm will not survive the move to exascale computers. Here we discuss the initial steps toward designing and implementing a CC method within this model. First, we introduce the general concepts behind a CC method, focusing on the aspects that make these methods difficult to parallelize with conventional techniques. Then we outline what is the computational core of the CC method - a matrix multiply - within the task-based approach that the FAST-OS project is designed to take advantage of. Finally we outline the general setup to implement the simplest CC method in this model, linearized CC doubles (LinCC).

  18. Chit-based Remote Storage

    E-Print Network [OSTI]

    Paluska, Justin Mazzola

    We propose a model for reliable remote storage founded on contract law. Consumers submit their bits to storage providers in exchange for a chit. A chit is a cryptographically secure, verifiable contract between a consumer ...

  19. Off-fault Damage Associated with a Localized Bend in the North Branch San Gabriel Fault, California

    E-Print Network [OSTI]

    Becker, Andrew 1987-

    2012-08-15T23:59:59.000Z

    Structures within very large displacement, mature fault zones, such as the North Branch San Gabriel Fault (NBSGF), are the product of a complex combination of processes. Off-fault damage within a damage zone and first-order geometric asperities...

  20. Improving Distribution System Reliability Through Risk-base Doptimization of Fault Management and Improved Computer-based Fault Location

    E-Print Network [OSTI]

    Dong, Yimai

    2013-11-07T23:59:59.000Z

    )’s regulation on power quality. Optimization in fault management tasks has the potential of improving system reliability by reducing the duration and scale of outages caused by faults through fast fault isolation and service restoration. The research reported...

  1. Evaluation of faulting characteristics and ground acceleration associated with recent movement along the Meers Fault, Southwestern Oklahoma

    E-Print Network [OSTI]

    Burrell, Richard Dennis

    1997-01-01T23:59:59.000Z

    Recent studies have shown that a 27 km section of the Meers Fault was reactivated during Holocene time. Although these studies have proven the occurrence of recent fault activity, many basic characteristics of the faulting remain unresolved...

  2. An algorithm for faulted phase and feeder selection under high impedance fault conditions

    E-Print Network [OSTI]

    Benner, Carl Lee

    1988-01-01T23:59:59.000Z

    proximate lines served by the same substation. Because of this signal propagation, a fault will be detected simultaneously on the faulted line and possibly several other lines served by the substation. Since it would not be plausible for a utility company... to deenergize the entire area served by a substation due to a high impedance fault on one lateral, a technique is needed to discriminate the faulted line from neighboring healthy feeders and healthy phases of the faulted feeder. Such a technique would also...

  3. Remote direct memory access

    DOE Patents [OSTI]

    Archer, Charles J.; Blocksome, Michael A.

    2012-12-11T23:59:59.000Z

    Methods, parallel computers, and computer program products are disclosed for remote direct memory access. Embodiments include transmitting, from an origin DMA engine on an origin compute node to a plurality target DMA engines on target compute nodes, a request to send message, the request to send message specifying a data to be transferred from the origin DMA engine to data storage on each target compute node; receiving, by each target DMA engine on each target compute node, the request to send message; preparing, by each target DMA engine, to store data according to the data storage reference and the data length, including assigning a base storage address for the data storage reference; sending, by one or more of the target DMA engines, an acknowledgment message acknowledging that all the target DMA engines are prepared to receive a data transmission from the origin DMA engine; receiving, by the origin DMA engine, the acknowledgement message from the one or more of the target DMA engines; and transferring, by the origin DMA engine, data to data storage on each of the target compute nodes according to the data storage reference using a single direct put operation.

  4. active fault segments: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fault activation Kuzmanov, Georgi 140 Early stage evolution of growth faults: 3D seismic insights from the Levant Basin, Eastern Mediterranean Materials Science Websites...

  5. Modeling and Measurement Constraints in Fault Diagnostics for HVAC Systems

    E-Print Network [OSTI]

    Najafi, Massieh

    2010-01-01T23:59:59.000Z

    in Fault Diagnostics for HVAC Systems Massieh Najafi 1 ,tools for determining HVAC diagnostics, methods todetect faults in HVAC systems are still generally

  6. Fault-tolerant TCP mechanisms 

    E-Print Network [OSTI]

    Satapati, Suresh Kumar

    2000-01-01T23:59:59.000Z

    point (TSAPs). In BSD, a service access point is a TCP socket identified by an IP address and port number, A TCP based fault-tolerant service is realized by replicating a server program onto one or more hosts and by having all replicas bind... backup sends the SEQUENCE NUMBER of the segment it recently sent. Since the primary server doesn't exist, the client does not acknowledge. The TCP on backup server keeps retransmitting the same segment, which can be counted to initiate a...

  7. Fault Controlled | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOEHazelPennsylvania: EnergyExolisFairway,FarmersFastcap SystemsShear Zone:Fault

  8. The aftermath of silurian faulting in southeast Michigan, and its effect on oil and gas exploration

    SciTech Connect (OSTI)

    Fowler, J.H. (Polaris Energy, Jackson, MI (United States))

    1994-08-01T23:59:59.000Z

    In Macomb Township of Macomb County, southeast Michigan, is found a sinuous normal fault extending along a N82[degrees]W strike, from end to end only 6 mi long, but with more than 260 ft of maximum displacement at the Trenton level. Through about 3 mi of its midsection extent, the main fault is paired with another normal fault with opposite displacement sense, forming a very narrow graben. The timing of development of this divergent wrench feature coincides with Caledonian tectonic activity, a period of intense structural disturbance and regional subsidence throughout the Michigan basin. The fault appears to cut no higher than A[sub 1] Carbonate, although relationships are obscured by subsequent dissolution of more than 500 ft of Salina A[sub 1], A[sub 2], B, D, and F salts along and beyond the trace of the fault. Collapse of interbedded carbonates and shales is evident, although the apparent lack of brecciation indicates salt removal was not rapid. Further, salt removal proceeded throughout the Devonian, producing dramatic compensatory thickening in overlying units. The development of this large feature in prime Niagaran reef territory may have prevented the discovery of reefs by obscuring what is otherwise well-known stratigraphy and seismic signature. The presence of oil production in dolomitized fracture zones in the Trenton/Black River rocks of nearby Ontario may point to similar potential yet remaining along the Macomb faulted trend.

  9. Physiochemical Evidence of Faulting Processes and Modeling of Fluid in Evolving Fault Systems in Southern California

    SciTech Connect (OSTI)

    Boles, James [Professor

    2013-05-24T23:59:59.000Z

    Our study targets recent (Plio-Pleistocene) faults and young (Tertiary) petroleum fields in southern California. Faults include the Refugio Fault in the Transverse Ranges, the Ellwood Fault in the Santa Barbara Channel, and most recently the Newport- Inglewood in the Los Angeles Basin. Subsurface core and tubing scale samples, outcrop samples, well logs, reservoir properties, pore pressures, fluid compositions, and published structural-seismic sections have been used to characterize the tectonic/diagenetic history of the faults. As part of the effort to understand the diagenetic processes within these fault zones, we have studied analogous processes of rapid carbonate precipitation (scaling) in petroleum reservoir tubing and manmade tunnels. From this, we have identified geochemical signatures in carbonate that characterize rapid CO2 degassing. These data provide constraints for finite element models that predict fluid pressures, multiphase flow patterns, rates and patterns of deformation, subsurface temperatures and heat flow, and geochemistry associated with large fault systems.

  10. Optimized Fault Location Final Project Report

    E-Print Network [OSTI]

    Engineering Research Center Optimized Fault Location Concurrent Technologies Corporation Final Project Report by the Concurrent Technologies Corporation (CTC) and the Power Systems Engineering Research Center (PSERC). NeitherOptimized Fault Location Final Project Report Power Systems Engineering Research Center A National

  11. Sensor Fault Diagnosis Using Principal Component Analysis 

    E-Print Network [OSTI]

    Sharifi, Mahmoudreza

    2010-07-14T23:59:59.000Z

    The purpose of this research is to address the problem of fault diagnosis of sensors which measure a set of direct redundant variables. This study proposes: 1. A method for linear senor fault diagnosis 2. An analysis of isolability and detectability...

  12. Sensor Fault Diagnosis Using Principal Component Analysis

    E-Print Network [OSTI]

    Sharifi, Mahmoudreza

    2010-07-14T23:59:59.000Z

    The purpose of this research is to address the problem of fault diagnosis of sensors which measure a set of direct redundant variables. This study proposes: 1. A method for linear senor fault diagnosis 2. An analysis of isolability and detectability...

  13. INDUCTION MOTOR FAULT DIAGNOSTIC AND MONITORING METHODS

    E-Print Network [OSTI]

    Povinelli, Richard J.

    INDUCTION MOTOR FAULT DIAGNOSTIC AND MONITORING METHODS by Aderiano M. da Silva, B.S. A Thesis;i Abstract Induction motors are used worldwide as the "workhorse" in industrial applications material. However, induction motor faults can be detected in an initial stage in order to prevent

  14. Self-triggering superconducting fault current limiter

    DOE Patents [OSTI]

    Yuan, Xing (Albany, NY); Tekletsadik, Kasegn (Rexford, NY)

    2008-10-21T23:59:59.000Z

    A modular and scaleable Matrix Fault Current Limiter (MFCL) that functions as a "variable impedance" device in an electric power network, using components made of superconducting and non-superconducting electrically conductive materials. The matrix fault current limiter comprises a fault current limiter module that includes a superconductor which is electrically coupled in parallel with a trigger coil, wherein the trigger coil is magnetically coupled to the superconductor. The current surge doing a fault within the electrical power network will cause the superconductor to transition to its resistive state and also generate a uniform magnetic field in the trigger coil and simultaneously limit the voltage developed across the superconductor. This results in fast and uniform quenching of the superconductors, significantly reduces the burnout risk associated with non-uniformity often existing within the volume of superconductor materials. The fault current limiter modules may be electrically coupled together to form various "n" (rows).times."m" (columns) matrix configurations.

  15. Remote monitoring for international safeguards

    SciTech Connect (OSTI)

    Dupree, S.A. [Sandia National Labs., Albuquerque, NM (United States); Sonnier, C.S. [Jupiter Corp., Albuquerque, NM (United States)

    1997-09-01T23:59:59.000Z

    Remote monitoring is not a new technology, and its application to safeguards relevant activities has been examined for a number of years. On behalf of the US Department of Energy and international partners, remote monitoring systems have been emplaced in nuclear facilities and laboratories in various parts of the world. The experience gained from these field trials of remote monitoring systems has shown the viability of the concept of using integrated monitoring systems. Although a wide variety of sensors has been used in the remote monitoring field trials conducted to date, the possible range of instrumentation that might be used has scarcely been touched. As the technology becomes widespread, large amounts of data will become available to inspectors responsible for safeguards activities at the sites. Effective use of remote monitoring will require processing, archiving, presenting, and assessing of these data. To provide reasonable efficiency in the application of this technology, data processing should be done in a careful and organized manner. The problem will be not an issue of poring over scant records but of surviving under a deluge of information made possible by modern technology. Fortunately, modern technology, which created the problem of the data glut, is available to come to the assistance of those inundated by data. Apart from the technological problems, one of the most important aspects of remote monitoring is the potential constraint related to the transmission of data out of a facility or beyond national borders. Remote monitoring across national borders can be seriously considered only in the context of a comprehensive, transparent, and open implementation regime.

  16. Vol. 48 No. SIG 0(PRO 35) 2007 Java Remote GluonJ Remote GluonJ

    E-Print Network [OSTI]

    Chiba, Shigeru

    Vol. 48 No. SIG 0(PRO 35) 2007 Java Remote GluonJ Remote GluonJ Remote GluonJ Remote GluonJ Java Remote GluonJ Remote GluonJ An AOP based Agile Development Environment for Distributed Software Muga/from the existing program easily. To support software development for Java with our method, we developed Remote

  17. T-573: Windows Remote Desktop Client DLL Loading Error Lets Remote Users Execute Arbitrary Code

    Broader source: Energy.gov [DOE]

    A vulnerability was reported in Windows Remote Desktop Client. A remote user can cause arbitrary code to be executed on the target user's system.

  18. Fault-Tolerant CCM Middleware for Embedded Adaptive Dependability (MEAD)

    E-Print Network [OSTI]

    Narasimhan, Priya

    Fault-Tolerant CCM Middleware for Embedded Adaptive Dependability (MEAD) Real-Time Fault Narasimhan Carnegie Mellon University CCM Workshop, Nashville, TN December 10, 2003 #12;12/11/2003 Page 2 Model precursor to a real-time fault tolerant CCM ­ Real-Time Fault Tolerant CORBA Standard RFP launched

  19. Mechanical Models of Fault-Related Folding

    SciTech Connect (OSTI)

    Johnson, A. M.

    2003-01-09T23:59:59.000Z

    The subject of the proposed research is fault-related folding and ground deformation. The results are relevant to oil-producing structures throughout the world, to understanding of damage that has been observed along and near earthquake ruptures, and to earthquake-producing structures in California and other tectonically-active areas. The objectives of the proposed research were to provide both a unified, mechanical infrastructure for studies of fault-related foldings and to present the results in computer programs that have graphical users interfaces (GUIs) so that structural geologists and geophysicists can model a wide variety of fault-related folds (FaRFs).

  20. Remote Store Programming: Mechanisms and Performance

    E-Print Network [OSTI]

    Wentzlaff, David

    2009-05-05T23:59:59.000Z

    This paper presents remote store programming (RSP). This paradigm combines usability and efficiency through the exploitation of a simple hardware mechanism, the remote store, which can easily be added to existing ...

  1. Structure of the eastern Red Rocks and Wind Ridge thrust faults, Wyoming: how a thrust fault gains displacement along strike 

    E-Print Network [OSTI]

    Huntsman, Brent Stanley

    1983-01-01T23:59:59.000Z

    OF FIELD MAPPING Methods . Thrust Faults . The Wind Ridge Thrust Fault System The Red Rocks Thrust Fault System CLAY MODEL STUDIES Purpose and Description Model Results DISCUSSION OF RESULTS Kinematics of the Red Rocks Thrust Fault Termination... . Kinematics of the Southern Wind Ridge Thrust Fault . . . A Conceptual Model of the Red Rocks Thrust Fault Termination Implications of the Red Rocks Fault Termination . . . . . . Page V1 V11 1X X1 X11 7 9 17 18 18 21 24 27 35 35 38 49 49...

  2. Remote Food Shopping Robot System in a Supermarket Realization of the shopping task from remote places

    E-Print Network [OSTI]

    Ohya, Akihisa

    Remote Food Shopping Robot System in a Supermarket ­Realization of the shopping task from remote- ulating remote objects. This system attempts to answer the challenge of extending mobile robot potentials in a supermarket from a remote location using the Internet. We built the prototype system by integrating custom

  3. Remote State Preparation: Arbitrary remote control of photon polarizations for quantum communication

    E-Print Network [OSTI]

    Kwiat, Paul

    Remote State Preparation: Arbitrary remote control of photon polarizations for quantum measurement to one photon of a polarization- entangled pair, we remotely prepare single photons in arbitrary. Finally, we discuss the states remotely preparable given a particular two-qubit resource state. Keywords

  4. Remote Sens. 2011, 3, 2529-2551; doi:10.3390/rs3112529 Remote Sensing

    E-Print Network [OSTI]

    Remote Sens. 2011, 3, 2529-2551; doi:10.3390/rs3112529 Remote Sensing ISSN 2072-4292 www.mdpi.com/journal/remotesensing Article Multispectral Remote Sensing from Unmanned Aircraft: Image Processing Workflows and Applications Abstract: Using unmanned aircraft systems (UAS) as remote sensing platforms offers the unique ability

  5. Remote Sens. 2009, 1, 519-533; doi:10.3390/rs1030519 Remote Sensing

    E-Print Network [OSTI]

    MacDonald, Lee

    Remote Sens. 2009, 1, 519-533; doi:10.3390/rs1030519 Remote Sensing ISSN 2072-4292 www of Remotely Sensed Data Paul H. Evangelista 1, *, Thomas J. Stohlgren 2 , Jeffrey T. Morisette 2 and Sunil model (Maxent) for its application and performance in remotely sensing invasive Tamarix sp. Six Landsat

  6. 10 January 2009 PHOTOGRAMMETRIC ENGINEERING & REMOTE SENSING High Performance Computing in Remote Sensing

    E-Print Network [OSTI]

    Plaza, Antonio J.

    10 January 2009 PHOTOGRAMMETRIC ENGINEERING & REMOTE SENSING High Performance Computing in Remote Book ReviewBook Review High Performance Computing in Remote Sensing introduces the most recent advances in the incorporation of the high-performance computing (HPC) paradigm in remote sensing missions. Eighteen well

  7. Area balance and strain in an extensional fault system: Strategies for improved oil recovery in fractured chalk, Gilbertown Field, southwestern Alabama. Annual report, March 1996--March 1997

    SciTech Connect (OSTI)

    Pashin, J.C.; Raymond, D.E.; Rindsberg, A.K.; Alabi, G.G.; Groshong, R.H.

    1997-08-01T23:59:59.000Z

    Gilbertown Field is the oldest oil field in Alabama and produces oil from chalk of the Upper Cretaceous Selma Group and from sandstone of the Eutaw Formation along the southern margin of the Gilbertown fault system. Most of the field has been in primary recovery since establishment, but production has declined to marginally economic levels. This investigation applies advanced geologic concepts designed to aid implementation of improved recovery programs. The Gilbertown fault system is detached at the base of Jurassic salt. The fault system began forming as a half graben and evolved in to a full graben by the Late Cretaceous. Conventional trapping mechanisms are effective in Eutaw sandstone, whereas oil in Selma chalk is trapped in faults and fault-related fractures. Burial modeling establishes that the subsidence history of the Gilbertown area is typical of extensional basins and includes a major component of sediment loading and compaction. Surface mapping and fracture analysis indicate that faults offset strata as young as Miocene and that joints may be related to regional uplift postdating fault movement. Preliminary balanced structural models of the Gilbertown fault system indicate that synsedimentary growth factors need to be incorporated into the basic equations of area balance to model strain and predict fractures in Selma and Eutaw reservoirs.

  8. Federal Water Use Indices

    Broader source: Energy.gov [DOE]

    FEMP provides water use indices as a guide for Federal agencies. Note that each is a rough estimate of water usage at different types of sites. Your site may vary considerably.

  9. Industrial energy use indices 

    E-Print Network [OSTI]

    Hanegan, Andrew Aaron

    2008-10-10T23:59:59.000Z

    Energy use index (EUI) is an important measure of energy use which normalizes energy use by dividing by building area. Energy use indices and associated coefficients of variation are computed for major industry categories ...

  10. Fault Tolerant Control using Cartesian Genetic Programming

    E-Print Network [OSTI]

    Fernandez, Thomas

    Fault Tolerant Control using Cartesian Genetic Programming Yoshikazu Hirayama University of York]: Robotics-- Sensors; F.2.2 [Analysis of Algorithms and Problem Complexity]: Nonnumerical Algorithms and Problems General Terms Algorithms, Reliability Keywords cartesian genetic programming, evolutionary

  11. Remote Laboratory Towards an integrated training system

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Remote Laboratory Towards an integrated training system Arnaud LELEVE, Hcene BENMOHAMED, Patrick.Meyer@ictt.ec-lyon.fr Abstract ­ Remote laboratories are essential to e-learning platforms in scientific and technical with the aim of giving means to instructors to build generic remote laboratory environments, homogeneously melt

  12. Remote Sensing for Water Quality Applications

    E-Print Network [OSTI]

    Remote Sensing for Water Quality Applications #12;Objective Give a brief update on GEO Inland and Nearshore Coastal Water Quality Remote Sensing Workshop (GEO Work Task WA-06-01)) Held in Geneva and Nearshore Coastal Water Quality Remote Sensing Workshop (GEO Work Task WA-06-01)) Organizing committee

  13. Remote Batch Invocation for Compositional Object Services

    E-Print Network [OSTI]

    Ryder, Barbara G.

    Remote Batch Invocation for Compositional Object Services Ali Ibrahim2 , Yang Jiao1 , Eli Tilevich1 Remote Procedure Calls do not compose efficiently, design- ers of distributed object systems use Data Transfer and Remote Fac¸ade patterns to create large-granularity interfaces, hard-coded for particular

  14. A REMOTE CONTROLLED UNDERWATER PHOTOGRAPHIC SURVEILLANCE SYSTEM

    E-Print Network [OSTI]

    A REMOTE CONTROLLED UNDERWATER PHOTOGRAPHIC SURVEILLANCE SYSTEM by Paul J. Kruse, Jr. MarineKernan, Director A Remote Controlled Underwater Photographic Surveillance System by Paul J. Kruse, Jr. United. September 1964 #12;#12;CONTENTS Page Introduction 1 Remote controlled photographic system and accessories 1

  15. INTERVAL METHODS IN REMOTE SENSING

    E-Print Network [OSTI]

    Ward, Karen

    INTERVAL METHODS IN REMOTE SENSING: RELIABLE SUB­DIVISION OF GEOLOGICAL AREAS David D. Coblentz, G of the locations which weren't that thoroughly analyzed. 1 #12; 2 The subdivision of a geological zone TOPOGRAPHIC INFORMATION One reason for subjectivity of the geological subdivision is the fact

  16. The Remote Media Immersion (RMI)

    E-Print Network [OSTI]

    Shahabi, Cyrus

    the ultimate digital media delivery platform. Its streaming media server delivers multiple high- bandwidth aspects). The hope is that our advances in digital media delivery will enable new applicationsThe Remote Media Immersion (RMI) system blends multiple cutting- edge media technologies to create

  17. Microscopic feather fractures in the faulting process

    E-Print Network [OSTI]

    Conrad, Robert Eugene

    1974-01-01T23:59:59.000Z

    . Naximum compressive stress trajectories in a photoelastic model are shown by solid lines. Short lines are drawn on isoclinics in crossed polarized light at 10' intervals of rotation. Load axis is N-S. stress (o'I) trajectories curve near the fault..., maximum compressive stress, trajectories to a two dimensional during sliding along (dashed lines) in a cylindrical specimen reduced elastic problem. (b) Expected ol trajectories a fault. crack by shear along the crack surfaces (Bieniawski, 1967...

  18. Remote Sensing Ayman F. Habib Electro-Magnetic Radiation

    E-Print Network [OSTI]

    Habib, Ayman

    Remote Sensing Ayman F. Habib 1 Chapter 2 Electro-Magnetic Radiation #12;Remote Sensing Ayman F. Habib 2 Elements of Remote Sensing #12;Remote Sensing Ayman F. Habib 3 Chapter 2 Radiation: nature & source #12;Remote Sensing Ayman F. Habib 4 Chapter 2 Interaction with the atmosphere #12;Remote Sensing

  19. Remote Sensing Ayman F. Habib Electro-Magnetic Radiation

    E-Print Network [OSTI]

    Habib, Ayman

    Remote Sensing Ayman F. Habib 1 Chapter 2 Electro-Magnetic Radiation Remote Sensing Ayman F. Habib 2 Elements of Remote Sensing #12;Remote Sensing Ayman F. Habib 3 Chapter 2 Radiation: nature & source Remote Sensing Ayman F. Habib 4 Chapter 2 Interaction with the atmosphere #12;Remote Sensing Ayman

  20. Further Development at JET of Remote Digital Photogrammetry Techniques and Remote Welding Under Conditions of Restricted Access

    E-Print Network [OSTI]

    Further Development at JET of Remote Digital Photogrammetry Techniques and Remote Welding Under Conditions of Restricted Access

  1. T-606: Sun Java System Access Manager Lets Remote Users Partially Modify Data and Remote Authenticated Users Partially Access Data

    Broader source: Energy.gov [DOE]

    Sun Java System Access Manager Lets Remote Users Partially Modify Data and Remote Authenticated Users Partially Access Data.

  2. The Remote Photogrammetric Survey and Engineering Analysis of the Divertor Structure during JET’s Remote Tile Exchange

    E-Print Network [OSTI]

    The Remote Photogrammetric Survey and Engineering Analysis of the Divertor Structure during JET’s Remote Tile Exchange

  3. Superoscillations Underlying Remote State Preparation for Relativistic Fields

    E-Print Network [OSTI]

    Ran Ber; Oded Kenneth; Benni Reznik

    2015-03-05T23:59:59.000Z

    We present a physical (gedanken) implementation of a generalized remote state preparation of relativistic quantum field states for an arbitrary set of observers. The prepared states are created in regions which are outside the future light-cone of the generating region. The mechanism, which is based on utilizing the vacuum state of a relativistic quantum field as a resource, sheds new light on the well known Reeh-Schlieder theorem, indicating its strong connection with the mathematical phenomenon of superoscillations.

  4. Remote sensing of marine pollution. (Latest citations from Oceanic Abstracts). Published Search

    SciTech Connect (OSTI)

    Not Available

    1993-04-01T23:59:59.000Z

    The bibliography contains citations concerning the application of remote sensing to pollution in the ocean. Remote sensing techniques discussed include radiometry, lidar, radar, satellite observations, infrared scanning, laser spectrometry, acoustics, and microwaves. Articles address oil spills, coastal ecosystems, ocean dumping, dredging, and biological indications of marine pollution. Emphasis is placed on identifying and characterizing oil spills. (Contains a minimum of 154 citations and includes a subject term index and title list.)

  5. Remote sensing of marine pollution. (Latest citations from Oceanic Abstracts). Published Search

    SciTech Connect (OSTI)

    Not Available

    1994-04-01T23:59:59.000Z

    The bibliography contains citations concerning the application of remote sensing to pollution in the ocean. Remote sensing techniques discussed include radiometry, lidar, radar, satellite observations, infrared scanning, laser spectrometry, acoustics, and microwaves. Articles address oil spills, coastal ecosystems, ocean dumping, dredging, and biological indications of marine pollution. Emphasis is placed on identifying and characterizing oil spills. (Contains a minimum of 163 citations and includes a subject term index and title list.)

  6. Remote sensing of marine pollution. (Latest citations from Oceanic Abstracts). Published Search

    SciTech Connect (OSTI)

    NONE

    1995-11-01T23:59:59.000Z

    The bibliography contains citations concerning the application of remote sensing to pollution in the ocean. Remote sensing techniques discussed include radiometry, lidar, radar, satellite observations, infrared scanning, laser spectrometry, acoustics, and microwaves. Articles address oil spills, coastal ecosystems, ocean dumping, dredging, and biological indications of marine pollution. Emphasis is placed on identifying and characterizing oil spills. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  7. Remote sensing of marine pollution. (Latest citations from Oceanic abstracts). Published Search

    SciTech Connect (OSTI)

    NONE

    1997-03-01T23:59:59.000Z

    The bibliography contains citations concerning the application of remote sensing to pollution in the ocean. Remote sensing techniques discussed include radiometry, lidar, radar, satellite observations, infrared scanning, laser spectrometry, acoustics, and microwaves. Articles address oil spills, coastal ecosystems, ocean dumping, dredging, and biological indications of marine pollution. Emphasis is placed on identifying and characterizing oil spills. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  8. Remote sensing of marine pollution. (Latest citations from Oceanic Abstracts). Published Search

    SciTech Connect (OSTI)

    NONE

    1995-01-01T23:59:59.000Z

    The bibliography contains citations concerning the application of remote sensing to pollution in the ocean. Remote sensing techniques discussed include radiometry, lidar, radar, satellite observations, infrared scanning, laser spectrometry, acoustics, and microwaves. Articles address oil spills, coastal ecosystems, ocean dumping, dredging, and biological indications of marine pollution. Emphasis is placed on identifying and characterizing oil spills. (Contains a minimum of 117 citations and includes a subject term index and title list.)

  9. Fault Detection and Load Distribution for the Wind Farm Challenge

    SciTech Connect (OSTI)

    Borchehrsen, Anders B.; Larsen, Jesper A.; Stoustrup, Jakob

    2014-08-24T23:59:59.000Z

    In this paper a fault detection system and a fault tolerant controller for a wind farm model. The wind farm model used is the one proposed as a public challenge. In the model three types of faults are introduced to a wind farm consisting of nine turbines. A fault detection system designed, by taking advantage of the fact that within a wind farm several wind turbines will be operating under all most identical conditions. The turbines are then grouped, and then turbines within each group are used to generate residuals for turbines in the group. The generated residuals are then evaluated using dynamical cumulative sum. The designed fault detection system is cable of detecting all three fault types occurring in the model. But there is room for improving the fault detection in some areas. To take advantage of the fault detection system a fault tolerant controller for the wind farm has been designed. The fault tolerant controller is a dispatch controller which is estimating the possible power at each individual turbine and then setting the reference accordingly. The fault tolerant controller has been compared to a reference controller. And the comparison shows that the fault tolerant controller performance better in all measures. The fault detection and a fault tolerant controller has been designed, and based on the simulated results the overall performance of the wind farm is improved on all measures. Thereby this is a step towards improving the overall performance of current and future wind farms.

  10. Remote Fault Detection of Building HVAC System Using a Global Optimization Program

    E-Print Network [OSTI]

    Lee, S. U.; Claridge, D. E.

    2004-01-01T23:59:59.000Z

    , V.K., 1983. Automatic calibration of conceptual rainfall-runoff models - the question of parameter observability and uniqueness, Water Resources Res., 19 (1): 260- 268. Subbarao, K., Burch, J., Hancock, C.E., Lekov, A., Balcomb, J.D., 1990...

  11. Collateral damage: Evolution with displacement of fracture distribution and secondary fault strands in fault

    E-Print Network [OSTI]

    Savage, Heather M.

    Collateral damage: Evolution with displacement of fracture distribution and secondary fault strands in fault damage zones Heather M. Savage1,2 and Emily E. Brodsky1 Received 22 April 2010; revised 10 of fracture distributions as a function of displacement to determine whether damage around small and large

  12. Fault-tolerant Sensor Network based on Fault Evaluation Matrix and Compensation for Intermittent Observation

    E-Print Network [OSTI]

    Fault-tolerant Sensor Network based on Fault Evaluation Matrix and Compensation for Intermittent-tolerant sensor network configuration problem for a target navigation. A sensor network system consists of many sensor nodes and its network connections. Each sensor node can exchange information by wireless

  13. Measuring and Modeling Fault Density for Plume-Fault Encounter Probability Estimation

    SciTech Connect (OSTI)

    Jordan, P.D.; Oldenburg, C.M.; Nicot, J.-P.

    2011-05-15T23:59:59.000Z

    Emission of carbon dioxide from fossil-fueled power generation stations contributes to global climate change. Storage of this carbon dioxide within the pores of geologic strata (geologic carbon storage) is one approach to mitigating the climate change that would otherwise occur. The large storage volume needed for this mitigation requires injection into brine-filled pore space in reservoir strata overlain by cap rocks. One of the main concerns of storage in such rocks is leakage via faults. In the early stages of site selection, site-specific fault coverages are often not available. This necessitates a method for using available fault data to develop an estimate of the likelihood of injected carbon dioxide encountering and migrating up a fault, primarily due to buoyancy. Fault population statistics provide one of the main inputs to calculate the encounter probability. Previous fault population statistics work is shown to be applicable to areal fault density statistics. This result is applied to a case study in the southern portion of the San Joaquin Basin with the result that the probability of a carbon dioxide plume from a previously planned injection had a 3% chance of encountering a fully seal offsetting fault.

  14. Fault Locating, Prediction and Protection (FLPPS)

    SciTech Connect (OSTI)

    Yinger, Robert, J.; Venkata, S., S.; Centeno, Virgilio

    2010-09-30T23:59:59.000Z

    One of the main objectives of this DOE-sponsored project was to reduce customer outage time. Fault location, prediction, and protection are the most important aspects of fault management for the reduction of outage time. In the past most of the research and development on power system faults in these areas has focused on transmission systems, and it is not until recently with deregulation and competition that research on power system faults has begun to focus on the unique aspects of distribution systems. This project was planned with three Phases, approximately one year per phase. The first phase of the project involved an assessment of the state-of-the-art in fault location, prediction, and detection as well as the design, lab testing, and field installation of the advanced protection system on the SCE Circuit of the Future located north of San Bernardino, CA. The new feeder automation scheme, with vacuum fault interrupters, will limit the number of customers affected by the fault. Depending on the fault location, the substation breaker might not even trip. Through the use of fast communications (fiber) the fault locations can be determined and the proper fault interrupting switches opened automatically. With knowledge of circuit loadings at the time of the fault, ties to other circuits can be closed automatically to restore all customers except the faulted section. This new automation scheme limits outage time and increases reliability for customers. The second phase of the project involved the selection, modeling, testing and installation of a fault current limiter on the Circuit of the Future. While this project did not pay for the installation and testing of the fault current limiter, it did perform the evaluation of the fault current limiter and its impacts on the protection system of the Circuit of the Future. After investigation of several fault current limiters, the Zenergy superconducting, saturable core fault current limiter was selected for installation. Because of some testing problems with the Zenergy fault current limiter, installation was delayed until early 2009 with it being put into operation on March 6, 2009. A malfunction of the FCL controller caused the DC power supply to the superconducting magnet to be turned off. This inserted the FCL impedance into the circuit while it was in normal operation causing a voltage resonance condition. While these voltages never reached a point where damage would occur on customer equipment, steps were taken to insure this would not happen again. The FCL was reenergized with load on December 18, 2009. A fault was experienced on the circuit with the FCL in operation on January 14, 2010. The FCL operated properly and reduced the fault current by about 8%, what was expected from tests and modeling. As of the end of the project, the FCL was still in operation on the circuit. The third phase of the project involved the exploration of several advanced protection ideas that might be at a state where they could be applied to the Circuit of the Future and elsewhere in the SCE electrical system. Based on the work done as part of the literature review and survey, as well as a number of internal meetings with engineering staff at SCE, a number of ideas were compiled. These ideas were then evaluated for applicability and ability to be applied on the Circuit of the Future in the time remaining for the project. Some of these basic ideas were implemented on the circuit including measurement of power quality before and after the FCL. It was also decided that we would take what was learned as part of the Circuit of the Future work and extend it to the next generation circuit protection for SCE. Also at this time, SCE put in a proposal to the DOE for the Irvine Smart Grid Demonstration using ARRA funding. SCE was successful in obtaining funding for this proposal, so it was felt that exploration of new protection schemes for this Irvine Smart Grid Demonstration would be a good use of the project resources. With this in mind, a protection system that uses fault interrupting switches, hi

  15. Disposable remote zero headspace extractor

    DOE Patents [OSTI]

    Hand, Julie J. (Idaho Falls, ID); Roberts, Mark P. (Arco, ID)

    2006-03-21T23:59:59.000Z

    The remote zero headspace extractor uses a sampling container inside a stainless steel vessel to perform toxicity characteristics leaching procedure to analyze volatile organic compounds. The system uses an in line filter for ease of replacement. This eliminates cleaning and disassembly of the extractor. All connections are made with quick connect fittings which can be easily replaced. After use, the bag can be removed and disposed of, and a new sampling container is inserted for the next extraction.

  16. Remote Sensing R. E. Mcintosh

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Technical s o Freiberge s 3 c/) ReleaseRemote Access

  17. Faulted joints: kinematics, displacementlength scaling relations and criteria for their identication

    E-Print Network [OSTI]

    Engelder, Terry

    and kinematics based on two sets of joints, pinnate joints and fault striations, reveal that some mesoscale faults (i.e., faults without linked fault segments) at the mesoscale: ªneoformed faultsº which form

  18. Microfracture fabric of the Punchbowl fault zone, San Andreas System, California

    E-Print Network [OSTI]

    Wilson, Jennifer Elizabeth

    1999-01-01T23:59:59.000Z

    The origin of fault zone structure is not completely understood. On the basis of mechanistic models of faulting, the characteristic internal structure of faults may largely be established early during growth of the fault, or it may develop...

  19. Robust Condition Monitoring and Fault Diagnosis of Variable Speed Induction Motor Drives

    E-Print Network [OSTI]

    Choi, Seungdeog

    2012-02-14T23:59:59.000Z

    The main types of faults studied in the literature are commonly categorized as electrical faults and mechanical faults. In addition to well known faults, the performance of a diagnostic algorithm and its operational reliability in harsh environments...

  20. A Hybrid Model Based and Statistical Fault Diagnosis System for Industrial Process

    E-Print Network [OSTI]

    Lin, Chen-Han

    2014-11-21T23:59:59.000Z

    This thesis presents a hybrid model based and statistical fault diagnosis system, which applied on the nonlinear three-tank model. The purpose of fault diagnosis is generating and analyzing the residual to find out the fault occurrence. This fault...

  1. Experience with Remote Job Execution

    SciTech Connect (OSTI)

    Lynch, Vickie E [ORNL; Cobb, John W [ORNL; Green, Mark L [ORNL; Kohl, James Arthur [ORNL; Miller, Stephen D [ORNL; Ren, Shelly [ORNL; Smith, Bradford C [ORNL; Vazhkudai, Sudharshan S [ORNL

    2008-01-01T23:59:59.000Z

    The Neutron Science Portal at Oak Ridge National Laboratory submits jobs to the TeraGrid for remote job execution. The TeraGrid is a network of high performance computers supported by the US National Science Foundation. There are eleven partner facilities with over a petaflop of peak computing performance and sixty petabytes of long-term storage. Globus is installed on a local machine and used for job submission. The graphical user interface is produced by java coding that reads an XML file. After submission, the status of the job is displayed in a Job Information Service window which queries globus for the status. The output folder produced in the scratch directory of the TeraGrid machine is returned to the portal with globus-url-copy command that uses the gridftp servers on the TeraGrid machines. This folder is copied from the stage-in directory of the community account to the user's results directory where the output can be plotted using the portal's visualization services. The primary problem with remote job execution is diagnosing execution problems. We have daily tests of submitting multiple remote jobs from the portal. When these jobs fail on a computer, it is difficult to diagnose the problem from the globus output. Successes and problems will be presented.

  2. Automatic Mobile Robot Control and Indication Method Using Augmented Reality Technology

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Automatic Mobile Robot Control and Indication Method Using Augmented Reality Technology Koji Ohmori and remote indication using the augmented reality technology. Keywords: mobile robot, automatic control, Kobe 658-8501, Japan kunio@konan-u.ac.jp Abstract. A mobile robot is an automatic machine

  3. Synthesis and evaluation of fault-tolerant quantum computer architectures

    E-Print Network [OSTI]

    Cross, Andrew W. (Andrew William), 1979-

    2005-01-01T23:59:59.000Z

    Fault-tolerance is the cornerstone of practical, large-scale quantum computing, pushed into its prominent position with heroic theoretical efforts. The fault-tolerance threshold, which is the component failure probability ...

  4. FEATURE BASED HANDLING OF SURFACE FAULTS IN COMPACT DISC PLAYERS

    E-Print Network [OSTI]

    Wickerhauser, M. Victor

    two photo detectors. The distances are the distance from the actual position of the OPU such surface faults. The core idea is not to rely on sensor information during the fault. The sensor signals

  5. Observations on the capability of the Criner fault, southern Oklahoma

    E-Print Network [OSTI]

    Williamson, Shawn Collin

    1996-01-01T23:59:59.000Z

    of the present study suggest that the Criner fault is an old tectonic feature with a deceptively youthful geomorphic appearance. Differential erosion has likely exhumed the Criner fault-line scarp in the resistant Ordovician limestone of the Criner Hills...

  6. Design and analysis of a fault tolerant network processor

    E-Print Network [OSTI]

    Desai, Shaishav A

    1998-01-01T23:59:59.000Z

    This thesis investigates the effect of transient faults on a processor and proposes on-chip fault tolerant design techniques to improve its reliability. The target processor is a general 32-bit, four stage pipeline, dual context RISC style design...

  7. Frictional properties of faults: from observation on the

    E-Print Network [OSTI]

    Winfree, Erik

    Frictional properties of faults: from observation on the Longitudinal Valley Fault, Taiwan myself lucky to do what I love and to wake up every day, happy and excited about the day to come

  8. East-west faults due to planetary contraction

    E-Print Network [OSTI]

    Beuthe, Mikael

    2010-01-01T23:59:59.000Z

    Contraction, expansion and despinning have been common in the past evolution of Solar System bodies. These processes deform the lithosphere until it breaks along faults. The type and orientation of faults are usually determined under the assumption of a constant lithospheric thickness, but lithospheric thinning can occur at the equator or at the poles due either to latitudinal variation in solar insolation or to localized tidal dissipation. Using thin elastic shells with variable thickness, I show that the equatorial thinning of the lithosphere transforms the homogeneous and isotropic fault pattern caused by contraction/expansion into a pattern of faults striking east-west, preferably formed in the equatorial region. By contrast, lithospheric thickness variations only weakly affect the despinning faulting pattern consisting of equatorial strike-slip faults and polar normal faults. If contraction is added to despinning, the despinning pattern first shifts to thrust faults striking north-south and then to thrus...

  9. New approach to the fault location problem using synchronized sampling

    E-Print Network [OSTI]

    Mrkic, Jasna

    1994-01-01T23:59:59.000Z

    This thesis presents a new approach to solving the problem of fault location on a transmission line using synchronized data from both ends of the line. The synchronized phase voltage and current samples taken during the fault transient are used...

  10. VCSEL fault location apparatus and method

    DOE Patents [OSTI]

    Keeler, Gordon A. (Albuquerque, NM); Serkland, Darwin K. (Albuquerque, NM)

    2007-05-15T23:59:59.000Z

    An apparatus for locating a fault within an optical fiber is disclosed. The apparatus, which can be formed as a part of a fiber-optic transmitter or as a stand-alone instrument, utilizes a vertical-cavity surface-emitting laser (VCSEL) to generate a test pulse of light which is coupled into an optical fiber under test. The VCSEL is subsequently reconfigured by changing a bias voltage thereto and is used as a resonant-cavity photodetector (RCPD) to detect a portion of the test light pulse which is reflected or scattered from any fault within the optical fiber. A time interval .DELTA.t between an instant in time when the test light pulse is generated and the time the reflected or scattered portion is detected can then be used to determine the location of the fault within the optical fiber.

  11. Controlled bidirectional remote state preparation in noisy environment: A generalized view

    E-Print Network [OSTI]

    Vishal Sharma; Chitra Shukla; Subhashish Banerjee; Anirban Pathak

    2014-09-02T23:59:59.000Z

    It is shown that a realistic, controlled bidirectional remote state preparation is possible using a large class of entangled quantum states having a particular structure. Existing protocols of probabilistic, deterministic and joint remote state preparation are generalized to obtain the corresponding protocols of controlled bidirectional remote state preparation (CBRSP). A general way of incorporating the effects of two well known noise processes, the amplitude-damping and phase-damping noise, on the probabilistic CBRSP process is studied in detail by considering that noise only affects the travel qubits of the quantum channel used for the probabilistic CBRSP process. Also indicated is how to account for the effect of these noise channels on deterministic and joint remote state CBRSP protocols.

  12. Remote sensing of soil radionuclide fluxes in a tropical ecosystem

    SciTech Connect (OSTI)

    Clegg, B.; Koranda, J.; Robinson, W.; Holladay, G.

    1980-11-06T23:59:59.000Z

    We are using a transponding geostationary satellite to collect surface environmental data to describe the fate of soil-borne radionuclides. The remote, former atomic testing grounds at the Eniwetok and Bikini Atolls present a difficult environment in which to collect continuous field data. Our land-based, solar-powered microprocessor and environmental data systems remotely acquire measurements of net and total solar radiation, rain, humidity, temperature, and soil-water potentials. For the past year, our water flux model predicts wet season plant transpiration rates nearly equal to the 6 to 7 mm/d evaporation pan rate, which decreases to 2 to 3 mm/d for the dry season. Radioisotopic analysis confirms the microclimate-estimated 1:3 to 1:20 soil to plant /sup 137/Cs dry matter concentration ratio. This ratio exacerbates the dose to man from intake of food plants. Nephelometer measurements of airborne particulates presently indicate a minimum respiratory radiological dose.

  13. Experimental characterization of faults on low-voltage systems

    E-Print Network [OSTI]

    Ahmed, Jubayer

    1992-01-01T23:59:59.000Z

    was to simulate a con- trolled arcing fault. Hence, the arcgap was maintained constant for a particular test. A tungsten welding rod was used as the electrode because it does not melt easily. This test was performed on a. single-phase system with 240 volts... better understanding of the problem. These arcing faults and high impedance and incipient faults constitute the previously mentioned low-current faults. Journal model is IEEE Transactions on Power Delivery. Although these problems have been...

  14. Fault seal analysis of Okan and Meren fields, Nigeria

    SciTech Connect (OSTI)

    Eisenberg, R.A. [Chevron Petroleum Technology Co., La Habra, CA (United States); Brenneman, R.J. [Chevron Overseas Petroleum Co., San Ramon, CA (United States); Adeogba, A.A. [Chevron Nigeria Ltd., Lagos (Nigeria)

    1995-08-01T23:59:59.000Z

    The sealing capacity and the dynamic seal behavior of faults between juxtaposed reservoirs were analyzed for Okan and Meren fields, offshore Nigeria. In both fields correlations were found between reservoir performance, juxtaposed fluid types, oil geochemistry, interpreted fluid contact relationships, fault sealing/leaking condition, and calculated smear gouge ratios. Integration of these data has been invaluable in quantifying fault seal risk and may effect depletion strategies for fault-juxtaposed reservoirs within these fields. Fault plane sections defined reservoir juxtapositions and aided visualization of potential cross-fault spill points. Smear gouge ratios calculated from E-logs were used to estimate the composition of fault-gouge materials between the juxtaposed reservoirs. These tools augmented interpretation of seal/nonseal character based on fluid contact relationships in proved reservoirs and, in addition, were used to quantify fault seal risk of untested fault-dependent closures in Okan. The results of these analyses were then used to interpret production-induced fault seal breakdown within the G-sands and also to risk seal integrity of fault dependent closures within the untested O-sands in an adjacent, upthrown fault block. Within this fault block the presence of potential fault intersection leak points and large areas of sand/sand juxtaposition with high smear gouge ratios (low sealing potential) limits potential reserves within the O-sand package. In Meren Field the E- and G-sands are juxtaposed, on different pressure decline, geochemically distinct, and are characterized by low smear gouge ratios. In contrast, specific G- and H-sands, juxtaposed across the same fault, contain similar OOWCs and are characterized by high smear gouge ratios. The cross-sealing and/or cross-leaking nature of compartment boundaries at Meren is related to fault displacement variation and the composition of displaced stratigraphy.

  15. Detachment Faulting & Geothermal Resources- Pearl Hot Spring, NV

    Broader source: Energy.gov [DOE]

    Detachment Faulting & Geothermal Resources - Pearl Hot Spring, NV presentation at the April 2013 peer review meeting held in Denver, Colorado.

  16. Photovoltaic ground fault and blind spot electrical simulations.

    SciTech Connect (OSTI)

    Flicker, Jack David; Johnson, Jay

    2013-06-01T23:59:59.000Z

    Ground faults in photovoltaic (PV) systems pose a fire and shock hazard. To mitigate these risks, AC-isolated, DC grounded PV systems in the United States use Ground Fault Protection Devices (GFPDs), e.g., fuses, to de-energize the PV system when there is a ground fault. Recently the effectiveness of these protection devices has come under question because multiple fires have started when ground faults went undetected. In order to understand the limitations of fuse-based ground fault protection in PV systems, analytical and numerical simulations of different ground faults were performed. The numerical simulations were conducted with Simulation Program with Integrated Circuit Emphasis (SPICE) using a circuit model of the PV system which included the modules, wiring, switchgear, grounded or ungrounded components, and the inverter. The derivation of the SPICE model and the results of parametric fault current studies are provided with varying array topologies, fuse sizes, and fault impedances. Closed-form analytical approximations for GFPD currents from faults to the grounded current carrying conductor-known as %E2%80%9Cblind spot%E2%80%9D ground faults-are derived to provide greater understanding of the influence of array impedances on fault currents. The behavior of the array during various ground faults is studied for a range of ground fault fuse sizes to determine if reducing the size of the fuse improves ground fault detection sensitivity. The results of the simulations show that reducing the amperage rating of the protective fuse does increase fault current detection sensitivity without increasing the likelihood of nuisance trips to a degree. Unfortunately, this benefit reaches a limit as fuses become smaller and their internal resistance increases to the point of becoming a major element in the fault current circuit.

  17. Understanding Fault Characteristics of Inverter-Based Distributed Energy Resources

    SciTech Connect (OSTI)

    Keller, J.; Kroposki, B.

    2010-01-01T23:59:59.000Z

    This report discusses issues and provides solutions for dealing with fault current contributions from inverter-based distributed energy resources.

  18. Experimental wrench faulting at confining pressure

    E-Print Network [OSTI]

    Bartlett, Wendy Louise

    1980-01-01T23:59:59.000Z

    along the precut, resembling the "flower or palm tree" structure noted by Sylvester and Smith (1976), in the Salton Sea area, California. The bounding fault above the down-dropped block dips at a lower angle to the forcing block-veneer interface than..., the oeometries, ori- gins, and sequence of development of structural elements comprising the fault zones. Specimens (2. 8 or 3. 4 x 3. 4 x 9. 4 cm) are loaded parallel to their longest dimension, at an average displacement rate -3 -1 of 7. 3 x 10 cm sec...

  19. Remote State Preparation for Quantum Fields

    E-Print Network [OSTI]

    Ran Ber; Erez Zohar

    2015-01-07T23:59:59.000Z

    Remote state preparation is generation of a desired state by a remote observer. In spite of causality, it is well known, according to the Reeh-Schlieder theorem, that it is possible for relativistic quantum field theories, and a "physical" process achieving this task, involving superoscillatory functions, has recently been introduced. In this work we deal with non-relativistic fields, and show that remote state preparation is also possible for them, hence generalizing the Reeh-Schlieder theorem.

  20. Remote Sensing Ayman F. Habib Image Registration & Rectification

    E-Print Network [OSTI]

    Habib, Ayman

    Remote Sensing Ayman F. Habib 1 Chapter 5 Image Registration & Rectification #12;Remote Sensing: Resampling techniques. #12;Remote Sensing Ayman F. Habib 3 Image Registration #12;Remote Sensing Ayman F be integrated/fused. Object Space Left Image Right Image Image Registration: Objective #12;Remote Sensing Ayman

  1. Remote Sensing Ayman F. Habib Image Registration & Rectification

    E-Print Network [OSTI]

    Habib, Ayman

    1 Remote Sensing Ayman F. Habib 1 Chapter 5 Image Registration & Rectification Remote Sensing Ayman: Resampling techniques. #12;2 Remote Sensing Ayman F. Habib 3 Image Registration Remote Sensing Ayman F. Habib be integrated/fused. Object Space Left Image Right Image Image Registration: Objective #12;3 Remote Sensing

  2. Remote Sensing Ayman F. Habib Data Acquisition Systems

    E-Print Network [OSTI]

    Habib, Ayman

    Remote Sensing Ayman F. Habib 1 Chapter 3 Data Acquisition Systems #12;Remote Sensing Ayman F. ­ Electro-mechanical scanners. #12;Remote Sensing Ayman F. Habib 3 Overview · LIDAR operational principles for recognition and classification purposes. #12;Remote Sensing Ayman F. Habib 4 Remote Sensing Systems Utilized

  3. UNSUPERVISED CLUSTERING FOR FAULT DIAGNOSIS IN NUCLEAR POWER PLANT COMPONENTS

    E-Print Network [OSTI]

    Boyer, Edmond

    1 UNSUPERVISED CLUSTERING FOR FAULT DIAGNOSIS IN NUCLEAR POWER PLANT COMPONENTS Piero Baraldi1 of prototypical behaviors. Its performance is tested with respect to an artificial case study and then applied on transients originated by different faults in the pressurizer of a nuclear power reactor. Key Words: Fault

  4. On Distributed Fault-Tolerant Detection in Wireless Sensor Networks

    E-Print Network [OSTI]

    Huang, Yinlun

    On Distributed Fault-Tolerant Detection in Wireless Sensor Networks Xuanwen Luo, Student Member problems for distributed fault-tolerant detection in wireless sensor networks: 1) how to address both it possible to perform energy- efficient fault-tolerant detection in a wireless sensor network. Index Terms

  5. Outlier Detection Rules for Fault Detection in Solar Photovoltaic Arrays

    E-Print Network [OSTI]

    Lehman, Brad

    , MPPT of the PV inverters, high fault impedance, or degradation of solar cells [1]. Without proper fault Abstract-- Solar photovoltaic (PV) arrays are unique power sources that may have uncleared fault current when utilizing conventional overcurrent protection devices. To monitor the PV operation and detect

  6. A Parametric Spectral Estimator for Faults Detection in Induction Machines

    E-Print Network [OSTI]

    Boyer, Edmond

    since their frequency resolution is limited and additional post-processing algorithms are required of bearing faults. Index Terms--Induction machine, faults detection, bearing faults, stator current that avoids the use of extra sensors since the stator currents are usually available and inexpensive

  7. RIS-M-2311 AUTOMATIC FAULT TREE CONSTRUCTION WITH RIKKE

    E-Print Network [OSTI]

    RISØ-M-2311 AUTOMATIC FAULT TREE CONSTRUCTION WITH RIKKE A COMPENDIUM OF EXAMPLES, VOLUME I BASIC MODELS J.R. Taylor Abstract. Examples of automatically constructed fault trees are given. In this first are intended to illustrate the prin- ciples of fault tree construction using the RIKKE failure analysis system

  8. Ris-M-2311 AUTOMATIC FAULT TREE CONSTRUCTION WITH RIKKE

    E-Print Network [OSTI]

    Risø-M-2311 Vol. 2 AUTOMATIC FAULT TREE CONSTRUCTION WITH RIKKE A COMPENDIUM OF EXAMPLES. VOLUME 2. CONTROL AND SAFETY LOOPS. J.R. Taylor Abstract. This second volume describes the construction of fault In this volume, examples of HIKKE fault tree construction including loops are given. The principles involved were

  9. Statistical estimation of multiple faults in aircraft gas turbine engines

    E-Print Network [OSTI]

    Ray, Asok

    415 Statistical estimation of multiple faults in aircraft gas turbine engines S Sarkar, C Rao of multiple faults in aircraft gas-turbine engines, based on a statistical pattern recognition tool called commercial aircraft engine. Keywords: aircraft propulsion, gas turbine engines, multiple fault estimation

  10. Identifying Security Fault Reports via Text Mining Michael Gegick, 2

    E-Print Network [OSTI]

    Young, R. Michael

    Identifying Security Fault Reports via Text Mining 1 Michael Gegick, 2 Pete Rotella, 1 Tao Xie 1 contains fault reports (FRs) collected from various sources such as development teams, test teams, and end-users. Software or security engineers manually analyze the FRs to label the subset of FRs that are security fault

  11. Diverse neural net solutions to a fault diagnosis problem \\Lambda

    E-Print Network [OSTI]

    Sharkey, Amanda

    Abstract The development of a neural net system for fault diagnosis in a mar­ ine diesel engine system solution to a problem of fault diagnosis in a four­stroke marine diesel engine; that of early to recognise faults in simulated data from a diesel engine; specifically to classify combustion condition

  12. Enhanced tamper indicator

    DOE Patents [OSTI]

    Garcia, Anthony R.; Johnston, Roger G.

    2003-07-08T23:59:59.000Z

    The present invention provides an apparatus and method whereby the reliability and tamper-resistance of tamper indicators can be improved. A flexible connector may be routed through a latch for an enclosure such as a door or container, and the free ends of the flexible connector may be passed through a first locking member and firmly attached to an insert through the use of one or more attachment members such as set screws. A second locking member may then be assembled in interlocking relation with the first locking member to form an interlocked assembly around the insert. The insert may have one or more sharp projections extending toward the first or second locking member so that any compressive force applied in an attempt to disassemble the interlocked assembly results in permanent, visible damage to the first or second locking member.

  13. Sandia National Laboratories: remote sensing devices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    remote sensing devices Sandia, Endicott Interconnect Technologies, EMCORE, International Micro Industries, NREL, Universal Instruments: Solar Glitter On March 21, 2013, in...

  14. Remote Sens. 2013, 5, 5969-5998; doi:10.3390/rs5115969 Remote Sensing

    E-Print Network [OSTI]

    Crawford, Ian

    Remote Sens. 2013, 5, 5969-5998; doi:10.3390/rs5115969 Remote Sensing ISSN 2072-4292 www, the technique presented in this paper would help them to quantify the impacts of OPEN ACCESS #12;Remote Sens; urban heat island effect; NDVI; artificial neural network; Markov chain; Dhaka 1. Introduction Urban

  15. Remote Sens. 2013, 5, 5173-5192; doi:10.3390/rs5105173 Remote Sensing

    E-Print Network [OSTI]

    Stephens, Scott L.

    Remote Sens. 2013, 5, 5173-5192; doi:10.3390/rs5105173 Remote Sensing ISSN 2072-4292 www for a geosynchronous OPEN ACCESS #12;Remote Sens. 2013, 5 5174 satellite with modern imaging detectors, software, and algorithms able to detect heat from early and small fires, and yield minute-scale detection times. Keywords

  16. Remote Sens. 2013, 5, 1484-1497; doi:10.3390/rs5031484 Remote Sensing

    E-Print Network [OSTI]

    Myneni, Ranga B.

    Remote Sens. 2013, 5, 1484-1497; doi:10.3390/rs5031484 Remote Sensing ISSN 2072-4292 www.mdpi.com/journal and the Community Land Model version 4 (CLM4), we investigated percent changes and controlling factors of global vegetation growth for the period 1982 to 2009. Over that 28-year period, both the remote-sensing estimate

  17. Remote Sens. 2013, 5, 2857-2882; doi:10.3390/rs5062857 Remote Sensing

    E-Print Network [OSTI]

    Myneni, Ranga B.

    Remote Sens. 2013, 5, 2857-2882; doi:10.3390/rs5062857 Remote Sensing ISSN 2072-4292 www.mdpi.com/journal/remotesensing Article Evaluation of CLM4 Solar Radiation Partitioning Scheme Using Remote Sensing and Site Level FPAR.e., that of the Community Land Model version 4 (CLM4) with coupled carbon and nitrogen cycles. Taking advantage of a unique

  18. CHAPTER 12:CHAPTER 12: Remote Sensing ofRemote Sensing of

    E-Print Network [OSTI]

    Gilbes, Fernando

    - and middle-infrared regions, water bodies appear very dark even black becausebodies appear very dark, even and pure and contains little suspended sediment or organic matter. Water Penetration Cozumel Island1 CHAPTER 12:CHAPTER 12: Remote Sensing ofRemote Sensing of WaterWaterWaterWater REFERENCE: Remote

  19. Remote imaging of concealed objects

    SciTech Connect (OSTI)

    Lev, Aner, E-mail: lev@soreq.gov.il; Sfez, Bruno, E-mail: lev@soreq.gov.il [Soreq NRC, Yavne, 81800 (Israel)

    2014-05-27T23:59:59.000Z

    Optical detection of objects hidden behind opaque screening layers is a challenging problem. We demonstrate an optically detected echographic-like method that combines collimated acoustic and laser beams. The acoustic waves cross the screening layers and their back-reflection from the hidden objects is detected through the analysis of a dynamic laser speckle pattern created at the outer surface of the screening layer. Real-time remote detection of moving targets 15 meters away, with a few mm resolutions is demonstrated using a very sensitive camera detection scheme.

  20. Remote Access | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Technical s o Freiberge s 3 c/) ReleaseRemote Access Ames Laboratory

  1. An algorithm for faulted phase and feeder selection under high impedance fault conditions 

    E-Print Network [OSTI]

    Benner, Carl Lee

    1988-01-01T23:59:59.000Z

    . One method based on increases in third and fifth harmonic symmetrical current components under high impedance fault conditions has been proposed by Balser et. Journal model is IEEE Transactions on Power Delivery. al, of Power Technologies Inc [1...

  2. Realistic fault modeling and quality test generation of combined delay faults

    E-Print Network [OSTI]

    Thadhlani, Ajaykumar A

    2001-01-01T23:59:59.000Z

    coupled lines. To cope up with these realistic testing problems, it is necessary to model the circuit defects by considering the capacitively coupling between lines. This needs a better fault model which can incorporate the local defects (such...

  3. Seismoelectric Imaging of a Shallow Fault System Employing Fault Guided Waves

    E-Print Network [OSTI]

    Cohrs, Frelynn Joseph Reese

    2012-07-16T23:59:59.000Z

    Independent sets of reflection seismic and seismoelectric data were collected, processed, and interpreted with the aim of generating and studying guided waves within a fault zone. While seismic surveys have recently been utilized to investigate...

  4. Clay fabric intensity in natural and artificial fault gouges: Implications for brittle fault zone processes and sedimentary

    E-Print Network [OSTI]

    Clay fabric intensity in natural and artificial fault gouges: Implications for brittle fault zone processes and sedimentary basin clay fabric evolution Samuel H. Haines,1 Ben A. van der Pluijm,1 Matt J intensity measurements using X-ray texture goniometry on 22 natural clay-rich fault gouges from low

  5. We develop a microprocessor design that tolerates hard faults, including fabrication defects and in-field faults,

    E-Print Network [OSTI]

    Sorin, Daniel J.

    1 Abstract We develop a microprocessor design that tolerates hard faults, including fabrication defects and in-field faults, by leveraging existing microprocessor redundancy. To do this, we must: detect FDUs with hard faults. In our reliable microprocessor design, we use DIVA dynamic verification

  6. Fault Tolerant CORBASpecification, OMG document: ptc/20000404

    E-Print Network [OSTI]

    Roma "La Sapienza", Università di

    Fault Tolerant CORBASpecification, V1.0 OMG document: ptc/2000­04­04 replaces draft adopted specification ptc/2000­03­04 and submission document orbos/00­01­19 This document is an OMG Final Adopted in the finalization phase. Comments on the content of this document are welcomed, and should be directed to issues

  7. All row, planar fault detection system

    DOE Patents [OSTI]

    Archer, Charles Jens; Pinnow, Kurt Walter; Ratterman, Joseph D; Smith, Brian Edward

    2013-07-23T23:59:59.000Z

    An apparatus, program product and method for detecting nodal faults may simultaneously cause designated nodes of a cell to communicate with all nodes adjacent to each of the designated nodes. Furthermore, all nodes along the axes of the designated nodes are made to communicate with their adjacent nodes, and the communications are analyzed to determine if a node or connection is faulty.

  8. Multi-directional fault detection system

    DOE Patents [OSTI]

    Archer, Charles Jens (Rochester, MN); Pinnow, Kurt Walter (Rochester, MN); Ratterman, Joseph D. (Rochester, MN); Smith, Brian Edward (Rochester, MN)

    2010-11-23T23:59:59.000Z

    An apparatus, program product and method checks for nodal faults in a group of nodes comprising a center node and all adjacent nodes. The center node concurrently communicates with the immediately adjacent nodes in three dimensions. The communications are analyzed to determine a presence of a faulty node or connection.

  9. Multi-directional fault detection system

    DOE Patents [OSTI]

    Archer, Charles Jens; Pinnow, Kurt Walter; Ratterman, Joseph D.; Smith, Brian Edward

    2010-06-29T23:59:59.000Z

    An apparatus, program product and method checks for nodal faults in a group of nodes comprising a center node and all adjacent nodes. The center node concurrently communicates with the immediately adjacent nodes in three dimensions. The communications are analyzed to determine a presence of a faulty node or connection.

  10. Global Trajectory Planning for Fault Tolerant Manipulators

    E-Print Network [OSTI]

    . Khosla Department of Electrical and Computer Engineering and The Robotics Institute, Carnegie Mellon attribute of robot manipulators in a growing range of applications such as space missions, nuclear waste retrieval, and medical robot­ ics. This trend has spawned a research effort in fault toler­ ant robotics

  11. 54 MAY | 2012 Gearbox Fault Detection

    E-Print Network [OSTI]

    Kusiak, Andrew

    , research in fault identification and condition monitoring is war- ranted. In this study, detecting wind of a test wind turbine. The gearbox was retested at the Dynamometer Test Facility (DTF) at NREL. To retest the gearbox, the complete nacelle, and the drive train of the test wind turbine were installed at the DTF

  12. Fault-tolerant quantum computation by anyons

    E-Print Network [OSTI]

    A. Yu. Kitaev

    1997-07-09T23:59:59.000Z

    A two-dimensional quantum system with anyonic excitations can be considered as a quantum computer. Unitary transformations can be performed by moving the excitations around each other. Measurements can be performed by joining excitations in pairs and observing the result of fusion. Such computation is fault-tolerant by its physical nature.

  13. Fault-Tolerant Spanners: Better and Simpler

    E-Print Network [OSTI]

    Dinitz, Michael

    2011-01-01T23:59:59.000Z

    A natural requirement of many distributed structures is fault-tolerance: after some failures, whatever remains from the structure should still be effective for whatever remains from the network. In this paper we examine spanners of general graphs that are tolerant to vertex failures, and significantly improve their dependence on the number of faults $r$, for all stretch bounds. For stretch $k \\geq 3$ we design a simple transformation that converts every $k$-spanner construction with at most $f(n)$ edges into an $r$-fault-tolerant $k$-spanner construction with at most $O(r^3 \\log n) \\cdot f(2n/r)$ edges. Applying this to standard greedy spanner constructions gives $r$-fault tolerant $k$-spanners with $\\tilde O(r^{2} n^{1+\\frac{2}{k+1}})$ edges. The previous construction by Chechik, Langberg, Peleg, and Roddity [STOC 2009] depends similarly on $n$ but exponentially on $r$ (approximately like $k^r$). For the case $k=2$ and unit-length edges, an $O(r \\log n)$-approximation algorithm is known from recent work of D...

  14. Coordinated Fault Tolerance for High-Performance Computing

    SciTech Connect (OSTI)

    Dongarra, Jack; Bosilca, George; et al.

    2013-04-08T23:59:59.000Z

    Our work to meet our goal of end-to-end fault tolerance has focused on two areas: (1) improving fault tolerance in various software currently available and widely used throughout the HEC domain and (2) using fault information exchange and coordination to achieve holistic, systemwide fault tolerance and understanding how to design and implement interfaces for integrating fault tolerance features for multiple layers of the software stack—from the application, math libraries, and programming language runtime to other common system software such as jobs schedulers, resource managers, and monitoring tools.

  15. Probabilistic model of fault detection in quantum circuits

    E-Print Network [OSTI]

    Anindita Banerjee; Anirban Pathak

    2009-05-12T23:59:59.000Z

    It is shown that the fault testing for quantum circuits does not follow conventional classical techniques. If probabilistic gate like Hadamard gate is included in a circuit then the classical notion of test vector is shown to fail. We have reported several new and distinguishing features of quantum fault and also presented a general methodology for detection of functional faults in a quantum circuit. The technique can generate test vectors for detection of different kinds of fault. Specific examples are given and time complexity of the proposed quantum fault detection algorithm is reported.

  16. V-202: Cisco Video Surveillance Manager Bugs Let Remote Users...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TE Bugs Let Remote Users Deny Service and Remote Adjacent Authenticated Users Gain Root Shell Access V-076: Cisco Wireless LAN Controller Bugs Let Remote Users Deny Service and...

  17. User Guide Remote Workplace to VDI Using RSA | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    User Guide Remote Workplace to VDI Using RSA User Guide Remote Workplace to VDI Using RSA Last updated on March 17, 2015 This document provides instructions for logging onto Remote...

  18. Remotely readable fiber optic compass

    DOE Patents [OSTI]

    Migliori, Albert (Santa Fe, NM); Swift, Gregory W. (Los Alamos, NM); Garrett, Steven L. (Pebble Beach, CA)

    1986-01-01T23:59:59.000Z

    A remotely readable fiber optic compass. A sheet polarizer is affixed to a magnet rotatably mounted in a compass body, such that the polarizer rotates with the magnet. The optical axis of the sheet polarizer is preferably aligned with the north-south axis of the magnet. A single excitation light beam is divided into four identical beams, two of which are passed through the sheet polarizer and through two fixed polarizing sheets which have their optical axes at right angles to one another. The angle of the compass magnet with respect to a fixed axis of the compass body can be determined by measuring the ratio of the intensities of the two light beams. The remaining ambiguity as to which of the four possible quadrants the magnet is pointing to is resolved by the second pair of light beams, which are passed through the sheet polarizer at positions which are transected by two semicircular opaque strips formed on the sheet polarizer. The incoming excitation beam and the four return beams are communicated by means of optical fibers, giving a remotely readable compass which has no electrical parts.

  19. Remotely readable fiber optic compass

    DOE Patents [OSTI]

    Migliori, A.; Swift, G.W.; Garrett, S.L.

    1985-04-30T23:59:59.000Z

    A remotely readable fiber optic compass. A sheet polarizer is affixed to a magnet rotatably mounted in a compass body, such that the polarizer rotates with the magnet. The optical axis of the sheet polarizer is preferably aligned with the north-south axis of the magnet. A single excitation light beam is divided into four identical beams, two of which are passed through the sheet polarizer and through two fixed polarizing sheets which have their optical axes at right angles to one another. The angle of the compass magnet with respect to a fixed axis of the compass body can be determined by measuring the ratio of the intensities of the two light beams. The remaining ambiguity as to which of the four possible quadrants the magnet is pointing to is resolved by the second pair of light beams, which are passed through the sheet polarizer at positions which are transected by two semicircular opaque strips formed on the sheet polarizer. The incoming excitation beam and the four return beams are communicated by means of optical fibers, giving a remotely readable compass which has no electrical parts.

  20. IEEE TRANSACTIONS ON GEOSCIENCE AND REMOTE SENSING, VOL. 41, NO. 8, AUGUST 2003 1821 Large-Scale Inverse Ku-Band Backscatter

    E-Print Network [OSTI]

    Long, David G.

    IEEE TRANSACTIONS ON GEOSCIENCE AND REMOTE SENSING, VOL. 41, NO. 8, AUGUST 2003 1821 Large influences heat exchange, fresh water exchange, and the absorption of solar radiation and is be- lieved to be a sensitive indicator of long-term climate trends [1], [2]. Consequently, the remote sensing community has

  1. High-definition analysis of fluid-induced seismicity related to the mesoscale hydromechanical properties of a fault zone

    E-Print Network [OSTI]

    Vallée, Martin

    -strain and seismic measurements taken in the fractured damage zone during the pressurization indicated that seismicity is triggered along low-permeable, highly rigid, low-dip angle, mesoscale-inherited fractures where-so-rigid, aseismic, sub- vertical, fault-related fractures. Using a three-dimensional distinct-element representation

  2. U-137: HP Performance Manager Unspecified Bug Lets Remote Users...

    Broader source: Energy.gov (indexed) [DOE]

    7: HP Performance Manager Unspecified Bug Lets Remote Users Execute Arbitrary Codes U-137: HP Performance Manager Unspecified Bug Lets Remote Users Execute Arbitrary Codes March...

  3. V-149: Microsoft Internet Explorer Object Access Bug Lets Remote...

    Broader source: Energy.gov (indexed) [DOE]

    CDwnBindInfo Object Reuse Flaw Lets Remote Users Execute Arbitrary Code U-047: Siemens Automation License Manager Bugs Let Remote Users Deny Service or Execute Arbitrary...

  4. Equitable Access: Remote and Rural Communities 'Transport Needs...

    Open Energy Info (EERE)

    Equitable Access: Remote and Rural Communities 'Transport Needs' Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Equitable Access: Remote and Rural Communities...

  5. automated remote plant: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Siegel, Mel 15 Use of remote sensing data to enhance the performance of a hydrodynamic simulation of a partially frozen power plant Engineering Websites Summary: Use of remote...

  6. U-074: Microsoft .NET Bugs Let Remote Users Execute Arbitrary...

    Broader source: Energy.gov (indexed) [DOE]

    4: Microsoft .NET Bugs Let Remote Users Execute Arbitrary Commands, Access User Accounts, and Redirect Users U-074: Microsoft .NET Bugs Let Remote Users Execute Arbitrary Commands,...

  7. V-150: Apache VCL Input Validation Flaw Lets Remote Authenticated...

    Broader source: Energy.gov (indexed) [DOE]

    Tomcat FORM Authenticator Lets Remote Users Conduct Session Fixation Attacks U-084: Cisco Digital Media Manager Lets Remote Authenticated Users Gain Elevated Privileges U-233:...

  8. U-010:HP Onboard Administrator Unspecified Flaw Lets Remote Users...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    HP Service Manager Unspecified Flaw Lets Remote Users Gain Unauthorized Access V-120: EMC Smarts Network Configuration Manager Java RMI Access Control Flaw Lets Remote Users...

  9. availiable remote sensing: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Remote SensingThermal Infrared Remote Sensing Thermal infrared) and thermal infrared energy (3.0 - 14 m). However, thermal infrared sensors allow humans to sense 2 Thermal...

  10. atmospheric remote sensing: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Infrared Remote SensingThermal Infrared Remote Sensing Thermal infrared) and thermal infrared energy (3.0 - 14 m). However, thermal infrared sensors allow humans to...

  11. aerospace remote sensing: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Remote SensingThermal Infrared Remote Sensing Thermal infrared) and thermal infrared energy (3.0 - 14 m). However, thermal infrared sensors allow humans to sense 2 Thermal...

  12. Final Technical Report Recovery Act: Online Nonintrusive Condition Monitoring and Fault Detection for Wind Turbines

    SciTech Connect (OSTI)

    Wei Qiao

    2012-05-29T23:59:59.000Z

    The penetration of wind power has increased greatly over the last decade in the United States and across the world. The U.S. wind power industry installed 1,118 MW of new capacity in the first quarter of 2011 alone and entered the second quarter with another 5,600 MW under construction. By 2030, wind energy is expected to provide 20% of the U.S. electricity needs. As the number of wind turbines continues to grow, the need for effective condition monitoring and fault detection (CMFD) systems becomes increasingly important [3]. Online CMFD is an effective means of not only improving the reliability, capacity factor, and lifetime, but it also reduces the downtime, energy loss, and operation and maintenance (O&M) of wind turbines. The goal of this project is to develop novel online nonintrusive CMFD technologies for wind turbines. The proposed technologies use only the current measurements that have been used by the control and protection system of a wind turbine generator (WTG); no additional sensors or data acquisition devices are needed. Current signals are reliable and easily accessible from the ground without intruding on the wind turbine generators (WTGs) that are situated on high towers and installed in remote areas. Therefore, current-based CMFD techniques have great economic benefits and the potential to be adopted by the wind energy industry. Specifically, the following objectives and results have been achieved in this project: (1) Analyzed the effects of faults in a WTG on the generator currents of the WTG operating at variable rotating speed conditions from the perspective of amplitude and frequency modulations of the current measurements; (2) Developed effective amplitude and frequency demodulation methods for appropriate signal conditioning of the current measurements to improve the accuracy and reliability of wind turbine CMFD; (3) Developed a 1P-invariant power spectrum density (PSD) method for effective signature extraction of wind turbine faults with characteristic frequencies in the current or current demodulated signals, where 1P stands for the shaft rotating frequency of a WTG; (4) Developed a wavelet filter for effective signature extraction of wind turbine faults without characteristic frequencies in the current or current demodulated signals; (5) Developed an effective adaptive noise cancellation method as an alternative to the wavelet filter method for signature extraction of wind turbine faults without characteristic frequencies in the current or current demodulated signals; (6) Developed a statistical analysis-based impulse detection method for effective fault signature extraction and evaluation of WTGs based on the 1P-invariant PSD of the current or current demodulated signals; (7) Validated the proposed current-based wind turbine CMFD technologies through extensive computer simulations and experiments for small direct-drive WTGs without gearboxes; and (8) Showed, through extensive experiments for small direct-drive WTGs, that the performance of the proposed current-based wind turbine CMFD technologies is comparable to traditional vibration-based methods. The proposed technologies have been successfully applied for detection of major failures in blades, shafts, bearings, and generators of small direct-drive WTGs. The proposed technologies can be easily integrated into existing wind turbine control, protection, and monitoring systems and can be implemented remotely from the wind turbines being monitored. The proposed technologies provide an alternative to vibration-sensor-based CMFD. This will reduce the cost and hardware complexity of wind turbine CMFD systems. The proposed technologies can also be combined with vibration-sensor-based methods to improve the accuracy and reliability of wind turbine CMFD systems. When there are problems with sensors, the proposed technologies will ensure proper CMFD for the wind turbines, including their sensing systems. In conclusion, the proposed technologies offer an effective means to achieve condition-based smart maintenance for wind turbines and have a gre

  13. Remotely-Sensed Indicators of N-Related Biomass Allocation in Schoenoplectus acutus

    E-Print Network [OSTI]

    Kelly, Maggi

    2014-01-01T23:59:59.000Z

    J (2012) Long-term carbon sequestration in North AmericanMalmer N (2004) Carbon sequestration in peatland: patternsto long-term carbon sequestration [3]. In addition to soil

  14. Completing fault models for abductive diagnosis

    SciTech Connect (OSTI)

    Knill, E. (Los Alamos National Lab., NM (United States)); Cox, P.T.; Pietrzykowski, T. (Technical Univ., NS (Canada))

    1992-11-05T23:59:59.000Z

    In logic-based diagnosis, the consistency-based method is used to determine the possible sets of faulty devices. If the fault models of the devices are incomplete or nondeterministic, then this method does not necessarily yield abductive explanations of system behavior. Such explanations give additional information about faulty behavior and can be used for prediction. Unfortunately, system descriptions for the consistency-based method are often not suitable for abductive diagnosis. Methods for completing the fault models for abductive diagnosis have been suggested informally by Poole and by Cox et al. Here we formalize these methods by introducing a standard form for system descriptions. The properties of these methods are determined in relation to consistency-based diagnosis and compared to other ideas for integrating consistency-based and abductive diagnosis.

  15. Stuck-at-fault test set compaction

    E-Print Network [OSTI]

    Vanfickell, Jason Michael

    2013-02-22T23:59:59.000Z

    of sltcp g(0. 5-ones~robo~, ~) Exc Bal, = 0. 25 ? of sites Figure 1. Formula for computation of the excitation balance Excitation balance is a metric computed for every detectable fault in the entire circuit. It is intended to provide a measure... Sigma ~ National Society of Collegiate Scholars Activities: ~ Texas A&M University Institute of Electrical and Electronic Engineers IT/Technology Chair and Webmaster, Fall 2003 ? Spring 2004 ~ Texas A&M University Student Engineers' Council...

  16. Method for remote detection of trace contaminants

    DOE Patents [OSTI]

    Simonson, Robert J.; Hance, Bradley G.

    2003-09-09T23:59:59.000Z

    A method for remote detection of trace contaminants in a target area comprises applying sensor particles that preconcentrate the trace contaminant to the target area and detecting the contaminant-sensitive fluorescence from the sensor particles. The sensor particles can have contaminant-sensitive and contaminant-insensitive fluorescent compounds to enable the determination of the amount of trace contaminant present in the target are by relative comparison of the emission of the fluorescent compounds by a local or remote fluorescence detector. The method can be used to remotely detect buried minefields.

  17. Heating remote rooms in passive solar buildings

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1981-01-01T23:59:59.000Z

    Remote rooms can be effectively heated by convection through a connecting doorway. A simple steady-state equation is developed for design purposes. Validation of a dynamic model is achieved using data obtained over a 13-day period. Dynamic effects are investigated using a simulation analysis for three different cases of driving temperature; the effect is to reduce the temperature difference between the driving room and the remote room compared to the steady-state model. For large temperature swings in the driving room a strategy which uses the intervening door in a diode mode is effective. The importance of heat-storing mass in the remote room is investigated.

  18. Fibre bundle framework for unitary quantum fault tolerance

    E-Print Network [OSTI]

    Daniel Gottesman; Lucy Liuxuan Zhang

    2013-09-26T23:59:59.000Z

    We introduce a differential geometric framework for describing families of quantum error-correcting codes and for understanding quantum fault tolerance. This work unifies the notion of topological fault tolerance with fault tolerance in other kinds of quantum error-correcting codes. In particular, we use fibre bundles with a natural flat projective connection to study the transformation of codewords under unitary fault-tolerant evolutions. We show that the fault-tolerant logical operations are given by the monodromy group for either of two bundles, both of which have flat projective connections. As concrete realizations of the general framework, we construct the bundles explicitly for two examples of fault-tolerant families of operations, the qudit transversal gates and the string operators in the toric code.

  19. Similarity Matching Techniques for Fault Diagnosis in Automotive Infotainment Electronics

    E-Print Network [OSTI]

    Kabir, Mashud

    2009-01-01T23:59:59.000Z

    Fault diagnosis has become a very important area of research during the last decade due to the advancement of mechanical and electrical systems in industries. The automobile is a crucial field where fault diagnosis is given a special attention. Due to the increasing complexity and newly added features in vehicles, a comprehensive study has to be performed in order to achieve an appropriate diagnosis model. A diagnosis system is capable of identifying the faults of a system by investigating the observable effects (or symptoms). The system categorizes the fault into a diagnosis class and identifies a probable cause based on the supplied fault symptoms. Fault categorization and identification are done using similarity matching techniques. The development of diagnosis classes is done by making use of previous experience, knowledge or information within an application area. The necessary information used may come from several sources of knowledge, such as from system analysis. In this paper similarity matching tec...

  20. U-203: HP Photosmart Bug Lets Remote Users Deny Service

    Broader source: Energy.gov [DOE]

    A vulnerability was reported in HP Photosmart. A remote user can cause denial of service conditions.

  1. Can remote sensing of land cover improve species distribution modelling?

    E-Print Network [OSTI]

    Bradley, Bethany

    COMMENTARY Can remote sensing of land cover improve species distribution modelling? Remote sensing- guish among broad classes of vegetation. However, the applicability of remote sensing to classification like from remote sensing ­ a map of tree species ­ and what can be delivered ­ a map of forest types

  2. applied remote sensing: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Thermal Infrared Remote Sensing Thermal Infrared Remote Sensing 12;0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4 Infrared Remote SensingThermal Infrared Remote SensingThermal Infrared...

  3. A Turing Machine Resisting Isolated Bursts Of Faults

    E-Print Network [OSTI]

    Capuni, Ilir

    2012-01-01T23:59:59.000Z

    We consider computations of a Turing machine under noise that causes consecutive violations of the machine's transition function. Given a constant upper bound B on the size of bursts of faults, we construct a Turing machine M(B) subject to faults that can simulate any fault-free machine under the condition that bursts are not closer to each other than V for an appropriate V = O(B^2).

  4. User Guide Remote PIV to VDI Using ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Click here to view certificate properties. Select the Detail tab. U. S. Department of Energy | Remote PIV to VDI Using a PIV Card 7 a. Select Enhanced Key Usage to display the...

  5. The Remote distractor effect in manual responses 

    E-Print Network [OSTI]

    Ricketts, Katie

    2006-01-01T23:59:59.000Z

    The remote distracter effect (RDE) has previously only been studied in relation to the saccadic system. Given the hypothesis of the premotor theory (Rizzolatti et al, 1987) that a covert shift of attention is a programmed ...

  6. Upper crustal faulting in an obliquely extending orogen, structural...

    Open Energy Info (EERE)

    faulting in an obliquely extending orogen, structural control on permeability and production in the Coso Geothermal Field, eastern California Jump to: navigation, search OpenEI...

  7. Active Fault Controls At High-Temperature Geothermal Sites- Prospectin...

    Open Energy Info (EERE)

    the level of unrecognized active faults present in these areas. Analysis of low-sun-angle aerial photography acquired over the Needle Rocks, Astor Pass, Empire, and Lee...

  8. Fault-tolerant distributed transactions for partitioned OLTP databases

    E-Print Network [OSTI]

    Jones, Evan P. C. (Evan Philip Charles), 1981-

    2012-01-01T23:59:59.000Z

    This thesis presents Dtxn, a fault-tolerant distributed transaction system designed specifically for building online transaction processing (OLTP) databases. Databases have traditionally been designed as general purpose ...

  9. atera fault central: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    deformation and creep along the central section of the North Anatolian Fault (Turkey): InSAR observations Geosciences Websites Summary: Interseismic deformation and creep...

  10. Checksum-Based Fault Tolerance for LU Factorization

    E-Print Network [OSTI]

    Davies, Teresa

    2014-01-01T23:59:59.000Z

    study of failures in high-performance computing systems. InFault tolerant high performance computing by a codingfor large-scale high- performance computing. In 2012

  11. PV Arc Fault Detector Challenges Due to Module Frequency Response...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This poster does not contain any proprietary or confidential information. Introduction PV system arc faults have led to a number of rooftop fires which have caused significant...

  12. Dating of major normal fault systems using thermochronology-...

    Open Energy Info (EERE)

    faults, timing of ductile mylonite formation and passage of rocks through the crystal-plastic to brittle transition, and multiple events of extensional unroofing. Here we...

  13. MICRO-SEISMICITY, FAULT STRUCTURE AND HYDRAULIC COMPARTMENTALIZATION...

    Open Energy Info (EERE)

    GETHERMAL FIELD, CALIFORNIA Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: MICRO-SEISMICITY, FAULT STRUCTURE AND HYDRAULIC...

  14. PHOTOVOLTAIC DC ARC FAULT DETECTOR TESTING AT SANDIA NATIONAL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PHOTOVOLTAIC DC ARC FAULT DETECTOR TESTING AT SANDIA NATIONAL LABORATORIES Jay Johnson 1 , Birger Pahl 2 , Charles Luebke 2 , Tom Pier 2 , Theodore Miller 3 , Jason Strauch 1 ,...

  15. Fault tolerant Quantum Information Processing with Holographic control

    E-Print Network [OSTI]

    G. A. Paz-Silva; G. K. Brennen; J. Twamley

    2010-08-10T23:59:59.000Z

    We present a fault-tolerant semi-global control strategy for universal quantum computers. We show that N-dimensional array of qubits where only (N-1)-dimensional addressing resolution is available is compatible with fault-tolerant universal quantum computation. What is more, we show that measurements and individual control of qubits are required only at the boundaries of the fault-tolerant computer, i.e. holographic fault-tolerant quantum computation. Our model alleviates the heavy physical conditions on current qubit candidates imposed by addressability requirements and represents an option to improve their scalability.

  16. Fault Tolerant Evaluation of Continuous Selection Queries over Sensor Data

    E-Print Network [OSTI]

    Lazaridis, Iosif; Han, Qi; Mehrotra, Sharad; Venkatasubramanian, Nalini

    2009-01-01T23:59:59.000Z

    Evaluation of Continuous Selection Queries over Sensor Dataevaluation of continuous selection queries (CSQs) over sensor-sensor suffices and there is no Fault Tolerant Evaluation of

  17. Aksaray And Ecemis Faults - Diapiric Salt Relationships- Relevance...

    Open Energy Info (EERE)

    Aksaray And Ecemis Faults - Diapiric Salt Relationships- Relevance To The Hydrocarbon Exploration In The Tuz Golu (Salt Lake) Basin, Central Anatolia, Turkey Jump to: navigation,...

  18. Wrench faulting and cavity concentration ; Dollarhide Field, Andrews County, Texas

    E-Print Network [OSTI]

    Dygert, Todd Charles

    1992-01-01T23:59:59.000Z

    structure map for the Devonian horizon 20 7. Seismic time slice taken at 1010 ms 8. Seismic line 190 9. Seismic line 108 10. Seismic line 40 22 25 27 11. Cross-sectional view of a wrench fault 31 12. Pure shear fault model for strike- slip.... The Clearfork horizon was mapped first since it was shallow, strong and continuous. The faults and Devonian horizon were interpreted simultaneously, Adjacent lines were interpreted together throughout the survey to insure consistent fault and horizon picks...

  19. Fault simulation of combinational circuits based on critical path tracing

    E-Print Network [OSTI]

    Burnett, Charles James

    1992-01-01T23:59:59.000Z

    advantage of the computer's internal architecture and does not intelligently analyze the CUT. The deductive simulator traverses the good circuit to determine the value of each line. At the same time, every fault that causes a line to have a different... of the faults on a line within the circuit is detected for a given test vector, the line is marked as critical [10]. These faults that are detected are marked as covered. This very quickly gathers faults without direct simulation to the outputs, however...

  20. Effects of Volcanism, Crustal Thickness, and Large Scale Faulting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Volcanism, Crustal Thickness, and Large Scale Faulting on the Development and Evolution of Geothermal Systems: Collaborative Project in Chile Effects of Volcanism, Crustal...

  1. automatic fault management: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Fault Diagnosis by Exploiting Application Signatures Xiaoning Ding - The Ohio - The Ohio State University ABSTRACT Application problem diagnosis in complex...

  2. automatic fault tree: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Fault Diagnosis by Exploiting Application Signatures Xiaoning Ding - The Ohio - The Ohio State University ABSTRACT Application problem diagnosis in complex...

  3. automatical adaptive fault: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Fault Diagnosis by Exploiting Application Signatures Xiaoning Ding - The Ohio - The Ohio State University ABSTRACT Application problem diagnosis in complex...

  4. Recent earthquake sequences at Coso: Evidence for conjugate faulting...

    Open Energy Info (EERE)

    of faulting along conjugate planes. We present results from analyzing an earthquake sequence occurring in 1998 and compare it with a similar sequence that occurred in 1996. The...

  5. Post-Cretaceous faulting at head of Mississippi embayment

    SciTech Connect (OSTI)

    Nelson, W.J. (Illinois State Geological Survey, Champaign, IL (United States)); Harrison, R.W. (Geological Survey, Reston, VA (United States))

    1993-03-01T23:59:59.000Z

    Recent mapping in southernmost Illinois and southeastern Missouri has revealed numerous faults that displace Cretaceous and Tertiary strata. Units as young as the Pliocene-Pleistocene( ) Mounds Gravel are deformed; some faults possibly displace Quaternary sediments. The faults strike northeast, dip nearly vertically, and exhibit characteristics of dextral strike-slip. Pull-apart grabens occur along right-stepping fault strands, they contain chaotically jumbled blocks of Paleozoic, Cretaceous and Tertiary rocks downdropped as much as 800 m relative to wall rocks. Faults at the head of the Mississippi embayment probably originated during Cambrian rifting (Reelfoot rift) and have a long, complex history of reactivation under different stress fields. Some faults are on strike with faults in the New Madrid seismic zone. Kinematics of post-Cretaceous displacements fit the contemporary stress regime of ENE-WSW compression. Similar fault orientations and kinematics, as well as close proximity, suggest a close link between faulting at the head of the embayment and ongoing tectonism in the New Madrid seismic zone.

  6. Recurrent faulting and petroleum accumulation, Cat Creek Anticline, central Montana

    SciTech Connect (OSTI)

    Nelson, W.J. (Illinois State Geological Survey, Champaign (United States))

    1991-06-01T23:59:59.000Z

    The Cat Creek anticline, scene of central Montana's first significant oil discovery, is underlain by a south-dipping high-angle fault (Cat Creek fault) that has undergone several episodes of movement with opposite sense of displacement. Borehole data suggest that the Cat Creek fault originated as a normal fault during Proterozoic rifting concurrent with deposition of the Belt Supergroup. Reverse faulting took place in Late Cambrian time, and again near the end of the Devonian Period. The Devonian episode, coeval with the Antler orogeny, raised the southern block several hundred feet. The southern block remained high through Meramecian time, then began to subside. Post-Atokan, pre-Middle Jurassic normal faulting lowered the southern block as much as 1,500 ft. During the Laramide orogeny (latest Cretaceous-Eocene) the Cat Creek fault underwent as much as 4,000 ft of reverse displacement and a comparable amount of left-lateral displacement. The Cat Creek anticline is a fault-propagation fold; en echelon domes and listric normal faults developed along its crest in response to wrenching. Oil was generated mainly in organic-rich shales of the Heath Formation (upper Chesterian Series) and migrated upward along tectonic fractures into Pennsylvanian, Jurassic, and Cretaceous reservoir rocks in structural traps in en echelon domes. Production has been achieved only from those domes where structural closure was retained from Jurassic through Holocene time.

  7. Remote sensing, imaging, and signal engineering

    SciTech Connect (OSTI)

    Brase, J.M.

    1993-03-01T23:59:59.000Z

    This report discusses the Remote Sensing, Imaging, and Signal Engineering (RISE) trust area which has been very active in working to define new directions. Signal and image processing have always been important support for existing programs at Lawrence Livermore National Laboratory (LLNL), but now these technologies are becoming central to the formation of new programs. Exciting new applications such as high-resolution telescopes, radar remote sensing, and advanced medical imaging are allowing us to participate in the development of new programs.

  8. Operating Costs Estimates Cost Indices

    E-Print Network [OSTI]

    Boisvert, Jeff

    to update costs of specific equipment, raw material or labor or CAPEX and OPEX of entire plants Cost Indices

  9. REMOTE OPERATION PATTERN Class Structural Enable clients to invoke operations on remote objects as if they were local. This pattern

    E-Print Network [OSTI]

    Keller, Rudolf K.

    1 / 7 REMOTE OPERATION PATTERN Class Structural Intent Enable clients to invoke operations on remote objects as if they were local. This pattern decouples the client from the network calls needed to access the remote object. Also Known As Remote Procedure Call Motivation This pattern applies

  10. Fiber optically isolated and remotely stabilized data transmission system

    DOE Patents [OSTI]

    Nelson, M.A.

    1992-11-10T23:59:59.000Z

    A fiber optically isolated and remotely stabilized data transmission systems described wherein optical data may be transmitted over an optical data fiber from a remote source which includes a data transmitter and a power supply at the remote source. The transmitter may be remotely calibrated and stabilized via an optical control fiber, and the power source may be remotely cycled between duty and standby modes via an optical control fiber. 3 figs.

  11. Remotely releasable template and dome

    SciTech Connect (OSTI)

    Allen, G.G. Jr.

    1986-12-02T23:59:59.000Z

    This patent describes a remotely releasable template assembly for precision placement of a template of the type having at least one sleeve member for placing about a well casing stub extending from the sea floor, comprising: mating means mounted with the template for demountably coupling the template to a complementary end of a drill string extending from a support structure located above the well casing stub. The mating means is positioned near the template assembly center of balance when the template assembly is demountably coupled to the drill string; the vertical axis of the drill string being essentially parallel to the longitudinal axis of the sleeve member when the drill string is demountably couple to the template assembly; the end of the drill string includes a gyroscopic orientation means for detecting the deviation of the template from a desired bearing; and the mating means maintains the template semi-ridgidly coupled to the drill string until the template is controllably released from the drill string; whereby the rotation of the drill string about the vertical axis of the drill string rotates the template assembly into the desired orientation.

  12. Direct dating of Eocene reverse faulting in northeastern Tibet using Ar-dating of fault clays and low-temperature thermochronometry

    E-Print Network [OSTI]

    Direct dating of Eocene reverse faulting in northeastern Tibet using Ar-dating of fault clays fault of northeastern Tibet by dating several size fractions of fault gouge clay that represent variable Ma and continued until at least Middle Miocene time and that authigenic clay growth occurred

  13. Evaluation of faulting characteristics and ground acceleration associated with recent movement along the Meers Fault, Southwestern Oklahoma 

    E-Print Network [OSTI]

    Burrell, Richard Dennis

    1997-01-01T23:59:59.000Z

    Exposures. 14 Diagram illustrating the effects of the Meers Fault scarp on stream channel pathways. 16 Tors on the western side of Elk Mountain, 17 Tors in Wichita Mountains known as Twin Rocks . . . 10 Tor Analysis Log utilized during fteld... and the adjacent petroleum rich Anadarko Basin. Moody and Hill (1956) identified the presence of a scarp along a section of the Meers Fault which deforms Quaternary deposits during a study of wrench fault tectonics. However, it was not until further observations...

  14. Treanmission Line Fault Location using Interoperability and Integration of Data and Model 

    E-Print Network [OSTI]

    Dutta, Papiya

    2014-01-10T23:59:59.000Z

    , classify and locate transmission line faults using synchronous samples of voltages and currents captured during fault transients from both ends of the transmission line of interest. The method is tested for several faults simulated on IEEE 118 bus test...

  15. Fault tolerant control of homopolar magnetic bearings and circular sensor arrays 

    E-Print Network [OSTI]

    Li, Ming-Hsiu

    2006-04-12T23:59:59.000Z

    Fault tolerant control can accommodate the component faults in a control system such as sensors, actuators, plants, etc. This dissertation presents two fault tolerant control schemes to accommodate the failures of power ...

  16. A Comparison of Fault Detection Methods For a Transcritical Refrigeration System

    E-Print Network [OSTI]

    Janecke, Alex Karl

    2012-10-19T23:59:59.000Z

    pairings of four faults: over/undercharge, evaporator fouling, gas cooler fouling, and compressor valve leakage. This technique allows for low cost measurement and independent detection of individual faults even when multiple faults are present. Results...

  17. Early Holocene and Late Pleistocene slip rates of the southern Dead Sea Fault determined from 10

    E-Print Network [OSTI]

    Klinger, Yann

    sites located along the Wadi Araba Fault (WAF) segment of the Dead Sea Fault are targeted on the DSF, focusing on the Wadi Araba Fault (WAF) segment (Figure 1b). The WAF strikes N12°E for about 160

  18. Data-Based Monitoring and Fault-Tolerant Control of Nonlinear Processes

    E-Print Network [OSTI]

    Chilin, David

    2012-01-01T23:59:59.000Z

    with a fault in the heat input/removal actuator to vessel 2with a fault in the heat input/removal actuator to vessel 2with a fault in the heat input/removal actuator to vessel 2

  19. Research on Fault Analysis and Fault-Tolerant Control of EV/HEV Powertrain

    E-Print Network [OSTI]

    Brest, Université de

    power industries, interests in diagnostics and fault-tolerant control of nuclear power plants have been industrial systems. To achieve these goals, monitoring and supervision are embedded in the electrical energy, FTC has been implemented in sensible applications such as aerospace, nuclear power, automotive

  20. Efficient Fault Tolerance: an Approach to Deal with Transient Faults in Multiprocessor Architectures

    E-Print Network [OSTI]

    Firenze, Università degli Studi di

    , 36, 56126 Pisa, Italy ** IEI/CNR, Via S. Maria, 46, 56126 Pisa, Italy Abstract Dynamic error, while making efficient use of the available resources. To this end, dynamic error processing must is integrated with a mechanism for dynamic error processing in a complete fault tolerance strategy. Reliability

  1. A core-based assessment of the spatial relationship of small faults associated with a basement-controlled, large normal fault in the Hickory Sandstone

    E-Print Network [OSTI]

    Graff, Mitchell C

    2006-10-30T23:59:59.000Z

    Measures of Small Faults??????????????? Page iii v vi viii xiv 1 3 3 5 7 10 10 10 12 14 18 20 26 28 vii 4. ESTIMATING SMALL FAULT DISPLACEMENT USING FAULT GOUGE THICKNESS AND PROTOLITH TEXTURE??????????... 4.1 Previous Work... is proportional to mean?????????????????????. 26 Combined scatterplot of faults with known gouge thickness versus known displacement and faults with known gouge thickness versus estimated displacement????????????????????. Page 37 38 39 40 43 45 47 48...

  2. Fault Analysis at a Wind Power Plant for One Year of Observation: Preprint

    SciTech Connect (OSTI)

    Muljadi, E.; Mills, Z.; Foster, R.; Conto, J.; Ellis, A.

    2008-07-01T23:59:59.000Z

    This paper analyzes the fault characteristics observed at a wind power plant, and the behavior of the wind power plant under fault events.

  3. SciTech Connect: Development of Asset Fault Signatures for Prognostic...

    Office of Scientific and Technical Information (OSTI)

    Development of Asset Fault Signatures for Prognostic and Health Management in the Nuclear Industry Citation Details In-Document Search Title: Development of Asset Fault Signatures...

  4. 2007 Urban Remote Sensing Joint Event Application of satellite Remote Sensing for Urban

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    2007 Urban Remote Sensing Joint Event Application of satellite Remote Sensing for Urban Risk Analysis: a case study of the 2003 extreme heat wave in Paris Bénédicte Dousset Hawaii Institute@ogs.trieste.it Abstract ­ Satellite observations are used to monitor the August 2003 heat wave in Paris

  5. Medical Remote Monitoring using sound environment analysis and wearable sensors 1 Medical Remote Monitoring using sound

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Medical Remote Monitoring using sound environment analysis and wearable sensors 1 X Medical Remote Monitoring using sound environment analysis and wearable sensors Dan Istrate1, Jérôme Boudy2, Hamid Medjahed1. In Europe, for example, the life expectancy for men is about 71 years and for women about 79 years

  6. REMOTE LABORATORIES IN AUTOMATION: AIP-PRIMECA RAO ARI PLATFORM Remote Laboratories in Automation

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    for thorough trainings in industrial We thank our sponsors : Schneider Electric which provided the automationREMOTE LABORATORIES IN AUTOMATION: AIP-PRIMECA RAO ARI PLATFORM Remote Laboratories in Automation of resources and competencies about industrial topics for many universities in Rhône-Alpes french Region. Due

  7. Automatic Fault Characterization via Abnormality-Enhanced Classification

    SciTech Connect (OSTI)

    Bronevetsky, G; Laguna, I; de Supinski, B R

    2010-12-20T23:59:59.000Z

    Enterprise and high-performance computing systems are growing extremely large and complex, employing hundreds to hundreds of thousands of processors and software/hardware stacks built by many people across many organizations. As the growing scale of these machines increases the frequency of faults, system complexity makes these faults difficult to detect and to diagnose. Current system management techniques, which focus primarily on efficient data access and query mechanisms, require system administrators to examine the behavior of various system services manually. Growing system complexity is making this manual process unmanageable: administrators require more effective management tools that can detect faults and help to identify their root causes. System administrators need timely notification when a fault is manifested that includes the type of fault, the time period in which it occurred and the processor on which it originated. Statistical modeling approaches can accurately characterize system behavior. However, the complex effects of system faults make these tools difficult to apply effectively. This paper investigates the application of classification and clustering algorithms to fault detection and characterization. We show experimentally that naively applying these methods achieves poor accuracy. Further, we design novel techniques that combine classification algorithms with information on the abnormality of application behavior to improve detection and characterization accuracy. Our experiments demonstrate that these techniques can detect and characterize faults with 65% accuracy, compared to just 5% accuracy for naive approaches.

  8. The northwest extension of the Meers Fault in southwestern Oklahoma

    E-Print Network [OSTI]

    Cetin, Hasan

    1991-01-01T23:59:59.000Z

    + t '+ + + ~et t 30 mt ~ 39 ~ 40 mt ~ 49 a 50 mt 59 060 m& 69 O20 mts29 26 26 ASZ ? ANNA SEISMIC ZONE ES ? ENOLA SWARM KRF ? KENTUCKY RIVER FAULT MF ? MEERS FAULT MU ? MONROE UPLIFT NM ? NEW MADRID NU ? NEMAHA UPLIFT PSD ? PIERRE, SOUTH DAKOTA WVF...

  9. An Information Flow Model of Fault Detection Margaret C. Thompson ?

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    not be practical. Nonethe­ less, Relay provides insight into testing and fault de­ tection and suggests an approach and Computer Science Amherst, MA 01003 University of California Irvine, CA 92717 Abstract Relay is a model of how a fault causes a failure on execution of some test datum. This process begins with introduction

  10. Fault Tolerant Oxygen Control of a Diesel Engine Air System

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Fault Tolerant Oxygen Control of a Diesel Engine Air System Rainer Nitsche Matthias Bitzer control problem of a Diesel engine air system having a jammed Exhaust Gas Recirculation (EGR) valve of the air system. Keywords: Fault tolerant control, Diesel engine, Air system, Model-based trajectory

  11. All-to-all sequenced fault detection system

    DOE Patents [OSTI]

    Archer, Charles Jens (Rochester, MN); Pinnow, Kurt Walter (Rochester, MN); Ratterman, Joseph D. (Rochester, MN); Smith, Brian Edward (Rochester, MN)

    2010-11-02T23:59:59.000Z

    An apparatus, program product and method enable nodal fault detection by sequencing communications between all system nodes. A master node may coordinate communications between two slave nodes before sequencing to and initiating communications between a new pair of slave nodes. The communications may be analyzed to determine the nodal fault.

  12. Fault Detection, Identification and Accommodation for an Electro-hydraulic

    E-Print Network [OSTI]

    Yao, Bin

    Fault Detection, Identification and Accommodation for an Electro-hydraulic System: An Adaptive in electro-hydraulic systems. It is well known fact that any realistic model of a hydraulic system suffers, such a scheme becomes a natural choice for designing robust fault detection algorithms for electro-hydraulic

  13. Arcing fault in sub-distribution branch circuits

    SciTech Connect (OSTI)

    Parise, G.; Grasseli, U.; Luozzo, V. Di (Univ. di Roma, Rome (Italy). Dept. di Ingegneria Elettrica)

    1993-04-01T23:59:59.000Z

    It's well known the importance of short-circuit current evaluation for the design of any power system. Every system is subject to faults, moreover short-circuits and ground faults can be expected in any point. Even if the maximum and minimum values are generally defined with reference at a bolted-fault, bolted short-circuits are rare and the fault usually involves arcing and burning; particularly the limit value of minimum short-circuit depends really on arcing-fault. In earlier experimental investigations into the functional simulation of insulation loss, in branch circuit conductors, the authors chose to normalize the arcing-fault simulation to be used in laboratory tests. This conventional simulation allows characterization of this intrinsically random phenomenon by means of a probabilistic approach, in order to define in statistical terms the expected short circuit value. The authors examine more closely the arcing-fault in the design of sub distribution branch-circuits as weak points of the installation. In fact, what they propose are straightforward criteria, whether in the structure of the system or in the coordination of protection, which afford a more rational control on arcing-fault.

  14. Stator current demodulation for induction machine rotor faults diagnosis

    E-Print Network [OSTI]

    Boyer, Edmond

    with emphasis on stator current processing [1], [2]. It has been proven that mechanical and electrical faultsStator current demodulation for induction machine rotor faults diagnosis El Houssin El Bouchikhi of the stator currents. Hence, demodulation of the stator currents is of high interest for induction machines

  15. Fuzzy Pattern Recognition Based Fault Diagnosis Rafik Bensaadi1

    E-Print Network [OSTI]

    Boyer, Edmond

    Fuzzy Pattern Recognition Based Fault Diagnosis Rafik Bensaadi1 , Leïla H. Mouss1 , Mohamed D in this paper the design of a Fuzzy Pattern Recognition System (FPRS) that solves, in real time, the main. Keywords: Diagnosis, fault detection, pattern recognition, fuzzy control, conjugate gradients, complex

  16. Symbolic identification for fault detection in aircraft gas turbine engines

    E-Print Network [OSTI]

    Ray, Asok

    Symbolic identification for fault detection in aircraft gas turbine engines S Chakraborty, S Sarkar and computationally inexpensive technique of component-level fault detection in aircraft gas-turbine engines identification, gas turbine engines, language-theoretic analysis 1 INTRODUCTION The propulsion system of modern

  17. Online Fault Detection and Tolerance for Photovoltaic Energy Harvesting Systems

    E-Print Network [OSTI]

    Pedram, Massoud

    and weather conditions (e.g., clouds), and the output power of PV systems is directly dependent on solar and mitigate the output power shortage under low levels of solar irradiance. Moreover, PV panels exhibit highly fault detection and tolerance. Our fault detection and tolerance technique reduces output power

  18. Triassic/Jurassic faulting patterns of Conecuh Ridge, southwest Alabama

    SciTech Connect (OSTI)

    Hutley, J.K.

    1985-02-01T23:59:59.000Z

    Two major fault systems influenced Jurassic structure and deposition on the Conecuh Ridge, southwest Alabama. Identification and dating of these fault systems are based on seismic-stratigraphic interpretation of a 7-township grid in Monroe and Conecuh Counties. Relative time of faulting is determined by fault geometry and by formation isopachs and isochrons. Smackover and Norphlet Formations, both Late Jurassic in age, are mappable seismic reflectors and are thus reliable for seismicstratigraphic dating. The earlier of the 2 fault systems is a series of horsts and grabens that trends northeast-southwest and is Late Triassic to Early Jurassic in age. The system formed in response to tensional stress associated with the opening of the Atlantic Ocean. The resulting topography was a series of northeast-southwest-trending ridges. Upper Triassic Eagle Mills and Jurassic Werner Formations were deposited in the grabens. The later fault system is also a series of horsts and grabens trending perpendicular to the first. This system was caused by tensional stress related to a pulse in the opening of the Gulf of Mexico. Faulting began in Early Jurassic and continued into Late Jurassic, becoming progressively younger basinward. At the basin margin, faulting produced a very irregular shoreline. Submerged horst blocks became centers for shoaling or carbonate buildups. Today, these blocks are exploration targets in southwest Alabama.

  19. Development of Hydrologic Characterization Technology of Fault Zones

    SciTech Connect (OSTI)

    Karasaki, Kenzi; Onishi, Tiemi; Wu, Yu-Shu

    2008-03-31T23:59:59.000Z

    Through an extensive literature survey we find that there is very limited amount of work on fault zone hydrology, particularly in the field using borehole testing. The common elements of a fault include a core, and damage zones. The core usually acts as a barrier to the flow across it, whereas the damage zone controls the flow either parallel to the strike or dip of a fault. In most of cases the damage zone isthe one that is controlling the flow in the fault zone and the surroundings. The permeability of damage zone is in the range of two to three orders of magnitude higher than the protolith. The fault core can have permeability up to seven orders of magnitude lower than the damage zone. The fault types (normal, reverse, and strike-slip) by themselves do not appear to be a clear classifier of the hydrology of fault zones. However, there still remains a possibility that other additional geologic attributes and scaling relationships can be used to predict or bracket the range of hydrologic behavior of fault zones. AMT (Audio frequency Magneto Telluric) and seismic reflection techniques are often used to locate faults. Geochemical signatures and temperature distributions are often used to identify flow domains and/or directions. ALSM (Airborne Laser Swath Mapping) or LIDAR (Light Detection and Ranging) method may prove to be a powerful tool for identifying lineaments in place of the traditional photogrammetry. Nonetheless not much work has been done to characterize the hydrologic properties of faults by directly testing them using pump tests. There are some uncertainties involved in analyzing pressure transients of pump tests: both low permeability and high permeability faults exhibit similar pressure responses. A physically based conceptual and numerical model is presented for simulating fluid and heat flow and solute transport through fractured fault zones using a multiple-continuum medium approach. Data from the Horonobe URL site are analyzed to demonstrate the proposed approach and to examine the flow direction and magnitude on both sides of a suspected fault. We describe a strategy for effective characterization of fault zone hydrology. We recommend conducting a long term pump test followed by a long term buildup test. We do not recommend isolating the borehole into too many intervals. We do recommend ensuring durability and redundancy for long term monitoring.

  20. Test generation and fault detection for VLSI PPL circuits

    SciTech Connect (OSTI)

    Amin, A.A.M.

    1987-01-01T23:59:59.000Z

    The problem of design for testability of PPL logic circuits is addressed. A test-generation package was developed which utilizes the special features of PPL logic to generate high fault coverage test vectors at a reduced computational cost. The test strategy assumes that one of the scan design techniques is used. A new methodology for test-vectors compaction without compromising the fault coverage is also proposed. A fault-oriented test-generation algorithm combined with a heuristic test-generation algorithm are the essential ingredients of this package. The fault-oriented algorithm uses a modified D-algorithm which includes look-ahead features and a new seven-valued logic to improve the average speed of the test-generation process. Fault coverages in the 90% range were obtained using the test sequences generated by this package.

  1. Boullier The fault zone geology 1 Fault zone geology: lessons from drilling through the Nojima and 1

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    drilling through the Nojima and 1 Chelungpu faults 2 3 Anne-Marie Boullier 4-Marie.Boullier@obs.ujf-grenoble.fr 8 9 Abstract 10 Several drilling projects have been conducted through significant topics 32 for future research, one of which was "fault zone drilling

  2. Boullier The fault zone geology 1 Fault zone geology: lessons from drilling through the Nojima and 1

    E-Print Network [OSTI]

    Boyer, Edmond

    drilling through the Nojima and 1 Chelungpu faults 2 3 Anne-Marie Boullier 4-Marie.Boullier@obs.ujf-grenoble.fr 8 9 Abstract 10 Several drilling projects have been conducted through was "fault zone drilling combined with surface-based 33 geophysical and geological

  3. Rupture Dynamics of Strike-Slip Faults with Stepovers: From Conceptually Simplified to Realistically Complex Fault Systems

    E-Print Network [OSTI]

    Liu, Zaifeng

    2014-05-05T23:59:59.000Z

    , the Aksay double-bend in the Altyn Tagh fault, and its ability to stop the dynamic rupture. A detailed parameter-space study has been performed in the simplified model. From the single fault test, I find that the Positive Coulomb Stress (PCS) region...

  4. Feb. 11, 2008 Advanced Fault Tolerance Solutions for High Performance Computing 1/47 Advanced Fault Tolerance Solutions

    E-Print Network [OSTI]

    Engelmann, Christian

    Feb. 11, 2008 Advanced Fault Tolerance Solutions for High Performance Computing 1/47 RAS RAS Advanced Fault Tolerance Solutions for High Performance Computing Christian Engelmann Oak Ridge National Solutions for High Performance Computing 2/47 · Nation's largest energy laboratory · Nation's largest

  5. Acceleration and evolution of faults: An example from the Hunter MountainPanamint Valley fault zone, Eastern California

    E-Print Network [OSTI]

    Amelung, Falk

    : R.D. van der Hilst Keywords: geodesy fault evolution InSAR rock mechanics Western United States assumes a monotonic increase in slip rate with time as the fault matures and straightens. The rate. However, before this can be realized, we need to better understand the various sources for discrepancies

  6. Effect of differential subsidence in growth-faulted regions on E-log patterns and preservation potential

    SciTech Connect (OSTI)

    Edwards, M.B.

    1985-02-01T23:59:59.000Z

    Detailed electric log correlation, supplemented by cores, in the Eocene Wilcox Group and the Oligocene Frio Formation of the Texas Gulf basin contradicts a commonly held notion that changes in log character across growth faults exclusively reflect changes in environment. An invariable consequence of growth faulting is thickening of a depositional unit in the downthrown block, reflecting a greater subsidence rate. The growth ratio (downthrown or upthrown) varies from just over 1:1 to as much as 10:1. Analysis and mapping of log character indicate that the basic unit of both deposition and physical correlation is regressive coarsening-upward sequences. In Wilcox deltas, prodelta shales pass up into delta-front sandstones while in Frio barrier-bar or standplains, shelf and lower-shoreface deposits pass up into upper-shoreface sandstones. Regressive packages grade downdip in environment from delta plain and bay or lagoon to offshore marine. Growth faults had no significant surface expression and did not separate contrasting environments. A marked change in log character (e.g., from smooth to serrated) across a growth fault in a regressive shoreface sequence appears to indicate that the subsidence rate of the downthrown block exceeded a threshold value, enabling preservation of low-energy muddy layers and possibly episodic waning-flow storm deposits that were largely destroyed by fair-weather wave reworking on the upthrown block. This concept has implications both to regional stratigraphy and reservoir properties. Correlative units can abruptly change log character across growth faults, impeding correlation. Sandstones in the downthrown block may contain shale barriers to vertical fluid flow if the threshold subsidence rate was exceeded.

  7. SMALL SCALE FUEL CELL AND REFORMER SYSTEMS FOR REMOTE POWER

    SciTech Connect (OSTI)

    Dennis Witmer

    2003-12-01T23:59:59.000Z

    New developments in fuel cell technologies offer the promise of clean, reliable affordable power, resulting in reduced environmental impacts and reduced dependence on foreign oil. These developments are of particular interest to the people of Alaska, where many residents live in remote villages, with no roads or electrical grids and a very high cost of energy, where small residential power systems could replace diesel generators. Fuel cells require hydrogen for efficient electrical production, however. Hydrogen purchased through conventional compressed gas suppliers is very expensive and not a viable option for use in remote villages, so hydrogen production is a critical piece of making fuel cells work in these areas. While some have proposed generating hydrogen from renewable resources such as wind, this does not appear to be an economically viable alternative at this time. Hydrogen can also be produced from hydrocarbon feed stocks, in a process known as reforming. This program is interested in testing and evaluating currently available reformers using transportable fuels: methanol, propane, gasoline, and diesel fuels. Of these, diesel fuels are of most interest, since the existing energy infrastructure of rural Alaska is based primarily on diesel fuels, but this is also the most difficult fuel to reform, due to the propensity for coke formation, due to both the high vaporization temperature and to the high sulfur content in these fuels. There are several competing fuel cell technologies being developed in industry today. Prior work at UAF focused on the use of PEM fuel cells and diesel reformers, with significant barriers identified to their use for power in remote areas, including stack lifetime, system efficiency, and cost. Solid Oxide Fuel Cells have demonstrated better stack lifetime and efficiency in demonstrations elsewhere (though cost still remains an issue), and procuring a system for testing was pursued. The primary function of UAF in the fuel cell industry is in the role of third party independent testing. In order for tests to be conducted, hardware must be purchased and delivered. The fuel cell industry is still in a pre-commercial state, however. Commercial products are defined as having a fixed set of specifications, fixed price, fixed delivery date, and a warrantee. Negotiations with fuel cell companies over these issues are often complex, and the results of these discussions often reveal much about the state of development of the technology. This work includes some of the results of these procurement experiments. Fuel cells may one day replace heat engines as the source of electrical power in remote areas. However, the results of this program to date indicate that currently available hardware is not developed sufficiently for these environments, and that significant time and resources will need to be committed for this to occur.

  8. Valve assembly having remotely replaceable bearings

    DOE Patents [OSTI]

    Johnson, Evan R. (San Diego, CA); Tanner, David E. (Poway, CA)

    1980-01-01T23:59:59.000Z

    A valve assembly having remotely replaceable bearings is disclosed wherein a valve disc is supported within a flow duct for rotation about a pair of axially aligned bearings, one of which is carried by a spindle received within a diametral bore in the valve disc, and the other of which is carried by a bearing support block releasably mounted on the duct circumferentially of an annular collar on the valve disc coaxial with its diametrical bore. The spindle and bearing support block are adapted for remote removal to facilitate servicing or replacement of the valve disc support bearings.

  9. Energy Efficiency Indicators Methodology Booklet

    E-Print Network [OSTI]

    Sathaye, Jayant

    2010-01-01T23:59:59.000Z

    Lighting Appliance Definition Energy use per householdE/employee Indicator E/m Definition Energy use per squarem 2 per building type Definition Energy per square meter for

  10. Geothermal Exploration Using Aviris Remote Sensing Data Over...

    Open Energy Info (EERE)

    Aviris Remote Sensing Data Over Fish Lake Valley, Nv Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Geothermal Exploration Using Aviris Remote...

  11. EAST TEXAS FOREST INVENTORY (ETFI) PILOT PROJECT REMOTE SENSING PHASE

    E-Print Network [OSTI]

    Hung, I-Kuai

    EAST TEXAS FOREST INVENTORY (ETFI) PILOT PROJECT REMOTE SENSING PHASE Dr. Daniel R. Unger, Remote) or the United States Forest Service (USFS) via the Southern Forest Inventory and Analysis Program (SFIA

  12. U-277: Google Chrome Multiple Flaws Let Remote Users Execute...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code U-277: Google Chrome Multiple Flaws Let Remote Users Execute Arbitrary Code October 9, 2012 - 6:00am Addthis...

  13. T-574: Google Chrome Multiple Flaws Let Remote Users Execute...

    Broader source: Energy.gov (indexed) [DOE]

    Multiple vulnerabilities were reported in Google Chrome. A remote user can cause arbitrary code to be executed on the target user's system. A remote user can bypass the pop-up...

  14. Remote sensing of terrestrial tropospheric aerosols from aircraft and satellites

    E-Print Network [OSTI]

    Remote sensing of terrestrial tropospheric aerosols from aircraft and satellites M I Mishchenko1 instruments suitable for aerosol remote sensing and give examples of aerosol retrievals obtained forcing directly by absorbing and reflecting sunlight, thereby cooling or heating the atmosphere

  15. User authentication and remote execution across administrative domains

    E-Print Network [OSTI]

    Kaminsky, Michael, 1976-

    2004-01-01T23:59:59.000Z

    (cont.) selectively delegates authority to processes running on remote machines that need to access other resources. The delegation mechanism lets users incrementally construct trust policies for remote machines. Measurements ...

  16. U-047: Siemens Automation License Manager Bugs Let Remote Users...

    Broader source: Energy.gov (indexed) [DOE]

    U-048: HP LaserJet Printers Unspecified Flaw Lets Remote Users Update Firmware with Arbitrary Code T-699: EMC AutoStart Buffer Overflows Let Remote Users Execute Arbitrary Code...

  17. Energy Efficiency Indicators Methodology Booklet

    SciTech Connect (OSTI)

    Sathaye, Jayant; Price, Lynn; McNeil, Michael; de la rue du Can, Stephane

    2010-05-01T23:59:59.000Z

    This Methodology Booklet provides a comprehensive review and methodology guiding principles for constructing energy efficiency indicators, with illustrative examples of application to individual countries. It reviews work done by international agencies and national government in constructing meaningful energy efficiency indicators that help policy makers to assess changes in energy efficiency over time. Building on past OECD experience and best practices, and the knowledge of these countries' institutions, relevant sources of information to construct an energy indicator database are identified. A framework based on levels of hierarchy of indicators -- spanning from aggregate, macro level to disaggregated end-use level metrics -- is presented to help shape the understanding of assessing energy efficiency. In each sector of activity: industry, commercial, residential, agriculture and transport, indicators are presented and recommendations to distinguish the different factors affecting energy use are highlighted. The methodology booklet addresses specifically issues that are relevant to developing indicators where activity is a major factor driving energy demand. A companion spreadsheet tool is available upon request.

  18. Opportunistic Transient-Fault Detection Mohamed A. Gomaa and T. N. Vijaykumar

    E-Print Network [OSTI]

    Vijaykumar, T. N.

    Opportunistic Transient-Fault Detection Mohamed A. Gomaa and T. N. Vijaykumar School of Electrical susceptibility of microprocessors to transient faults. Most current proposals for transient-fault detection use redundancy by exploiting reuse's implicit redundancy within the main thread for fault detection with vir

  19. Locating hardware faults in a parallel computer

    DOE Patents [OSTI]

    Archer, Charles J.; Megerian, Mark G.; Ratterman, Joseph D.; Smith, Brian E.

    2010-04-13T23:59:59.000Z

    Locating hardware faults in a parallel computer, including defining within a tree network of the parallel computer two or more sets of non-overlapping test levels of compute nodes of the network that together include all the data communications links of the network, each non-overlapping test level comprising two or more adjacent tiers of the tree; defining test cells within each non-overlapping test level, each test cell comprising a subtree of the tree including a subtree root compute node and all descendant compute nodes of the subtree root compute node within a non-overlapping test level; performing, separately on each set of non-overlapping test levels, an uplink test on all test cells in a set of non-overlapping test levels; and performing, separately from the uplink tests and separately on each set of non-overlapping test levels, a downlink test on all test cells in a set of non-overlapping test levels.

  20. Self field triggered superconducting fault current limiter

    DOE Patents [OSTI]

    Tekletsadik, Kasegn D. (Rexford, NY)

    2008-02-19T23:59:59.000Z

    A superconducting fault current limiter array with a plurality of superconductor elements arranged in a meanding array having an even number of supconductors parallel to each other and arranged in a plane that is parallel to an odd number of the plurality of superconductors, where the odd number of supconductors are parallel to each other and arranged in a plane that is parallel to the even number of the plurality of superconductors, when viewed from a top view. The even number of superconductors are coupled at the upper end to the upper end of the odd number of superconductors. A plurality of lower shunt coils each coupled to the lower end of each of the even number of superconductors and a plurality of upper shunt coils each coupled to the upper end of each of the odd number of superconductors so as to generate a generally orthoganal uniform magnetic field during quenching using only the magenetic field generated by the superconductors.

  1. Virtual Reality to Improve Remote Control in Presence of Delays

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    or domotics. I. VIRTUAL REALITY AND REMOTE CONTROL One of the aims of virtual reality is to reproduce real

  2. U-231: Cisco ASA SIP and WebVPN Bugs Let Remote Users Deny Service

    Broader source: Energy.gov [DOE]

    Two vulnerabilities were reported in Cisco ASA. A remote or remote authenticated user can cause denial of service conditions.

  3. Fault-tree construction and calculations on a microcomputer

    E-Print Network [OSTI]

    Beckmann, Jeffery Linn

    1985-01-01T23:59:59.000Z

    Figure 17 - Program Overview Screen Figure 18 ? Main Menu Screen Figure 19 ? Invalid Command Screen Figure 20 - First Usage of Disk Screen Figure 21 ? Fault-tree Name Screen Figure 22 - Invalid Fault-tree Name Screen Fi gure 23 ? TOP EVENT Label... to do? Fi gure 19. Inval i d Command Screen 53 CREATE - This command allows the user to build a new fault tree. After a CREATE command is entered, the system wi 1 1 display the screen in Figure 20. This question is asked in order to determine...

  4. Visualization of stacking faults in fcc crystals in plastic deformations

    E-Print Network [OSTI]

    Takeshi Kawasaki; Akira Onuki

    2011-11-27T23:59:59.000Z

    Using molecular dynamics simulation, we investigate the dynamics of stacking faults in fcc crystals in uniaxial stretching in a Lennard-Jones binary mixture composed of 4096 particles in three dimensions. We visualize stacking faults using a disorder variable $D_j(t)$ for each particle $j$ constructed from local bond order parameters based on spherical harmonics (Steinhardt order parameters). Also introducing a method of bond breakage, we examine how stacking faults are formed and removed by collective particle motions. These processes are relevant in plasticity of fcc crystals.

  5. Fault-tree construction and calculations on a microcomputer 

    E-Print Network [OSTI]

    Beckmann, Jeffery Linn

    1985-01-01T23:59:59.000Z

    Figure 17 - Program Overview Screen Figure 18 ? Main Menu Screen Figure 19 ? Invalid Command Screen Figure 20 - First Usage of Disk Screen Figure 21 ? Fault-tree Name Screen Figure 22 - Invalid Fault-tree Name Screen Fi gure 23 ? TOP EVENT Label... to do? Fi gure 19. Inval i d Command Screen 53 CREATE - This command allows the user to build a new fault tree. After a CREATE command is entered, the system wi 1 1 display the screen in Figure 20. This question is asked in order to determine...

  6. Remote high-temperature insulatorless heat-flux gauge

    DOE Patents [OSTI]

    Noel, B.W.

    1993-12-28T23:59:59.000Z

    A remote optical heat-flux gauge for use in extremely high temperature environments is described. This application is possible because of the use of thermographic phosphors as the sensing media, and the omission of the need for an intervening layer of insulator between phosphor layers. The gauge has no electrical leads, but is interrogated with ultraviolet or laser light. The luminescence emitted by the two phosphor layers, which is indicative of the temperature of the layers, is collected and analyzed in order to determine the heat flux incident on the surface being investigated. The two layers of thermographic phosphor must be of different materials to assure that the spectral lines collected will be distinguishable. Spatial heat-flux measurements can be made by scanning the light across the surface of the gauge. 3 figures.

  7. Remote high-temperature insulatorless heat-flux gauge

    DOE Patents [OSTI]

    Noel, Bruce W. (Espanola, NM)

    1993-01-01T23:59:59.000Z

    A remote optical heat-flux gauge for use in extremely high temperature environments is described. This application is possible because of the use of thermographic phosphors as the sensing media, and the omission of the need for an intervening layer of insulator between phosphor layers. The gauge has no electrical leads, but is interrogated with ultraviolet or laser light. The luminescence emitted by the two phosphor layers, which is indicative of the temperature of the layers, is collected and analyzed in order to determine the heat flux incident on the surface being investigated. The two layers of thermographic phosphor must be of different materials to assure that the spectral lines collected will be distinguishable. Spatial heat-flux measurements can be made by scanning the light across the surface of the gauge.

  8. Dynamic leakage of faults during differential depletion: Theory, models, and examples from the Niger delta

    SciTech Connect (OSTI)

    Watts, N.L.; Kaars Sijpestein, C.H.; Osai, L.N.; Okoli, O.C. (Shell Petroleum Development Co. of Nigeria, Lagos (Nigeria))

    1991-08-01T23:59:59.000Z

    Previous studies of fault sealing have addressed possible fault leakage during secondary migration due to the effects of increased hydrocarbon-water capillary pressure, fracturing, or small-scale incremental fault movements. Of equal importance to production geologists is the failure and leakage of faults during field development due to differential depletion of adjacent fault blocks. This paper examines the unique problems associated with this dynamic leakage of faults. It is theoretically shown that the fault sealing mechanism, and the extent of the seal, directly influences the failure process which in turn results in a variety of favorable and unfavorable effects on field development. The qualitative models give considerable insight into such aspects as oil-column expansion and resaturation losses, interfault block aquifer support (with important implications to material balance calculations), possible leakage or spillage of oil across faults, and potential fault failure during (re)injection projects. Examples of dynamic fault leakage are presented from selected fields of the Niger delta.

  9. Remote Health Monitoring Using Online Social Media Systems

    E-Print Network [OSTI]

    Bhatti, Saleem N.

    Remote Health Monitoring Using Online Social Media Systems Chonlatee Khorakhun University of St@cs.st-andrews.ac.uk Abstract--Remote monitoring is considered an essential part of future eHealth systems to enable the general requirements of a remote monitoring scenario and the process of building and using a Facebook

  10. Remote Sensing Data and Information for Hydrological Monitoring and Modeling

    E-Print Network [OSTI]

    Krakauer, Nir Y.

    1 Remote Sensing Data and Information for Hydrological Monitoring and Modeling Reza Khanbilvardi Springs, MD, USA 1 Introduction Remote sensing data and information are shown great potential in supplying measurements, remote sensing based measurements are spatially averages over the pixels can appropriate

  11. Remote Book Browsing System using a Mobile Manipulator Tetsuo Tomizawa

    E-Print Network [OSTI]

    Ohya, Akihisa

    Remote Book Browsing System using a Mobile Manipulator Tetsuo Tomizawa , Akihisa Ohya and Shin manipu- lator as a teleoperated tool for accessing and manipulating remote objects, in our challenge in this research is to help humans browse books located in a library from a remote location via the Internet

  12. Remote Sensing in Support of Multilateral Environmental Agreements

    E-Print Network [OSTI]

    Columbia University

    Remote Sensing in Support of Multilateral Environmental Agreements Alex de Sherbinin CIESIN, from 172 in 1970 to more than 475 today · the sophistication of remote sensing and geospatial sets · the number of global and regional initiatives attempting to apply remote sensing (RS

  13. Remote Sensing for Biodiversity Conservation of the Albertine Rift

    E-Print Network [OSTI]

    Wang, Y.Q. "Yeqiao"

    183 10 Remote Sensing for Biodiversity Conservation of the Albertine Rift in Eastern Africa Samuel 2003). The rapidly developing field of remote sensing has been invaluable to biodiversity conservation distribution depend (Debinski et al. 1999). The field of remote sens- ing complements traditional field

  14. UAS remote sensing missions for rangeland applications Andrea S. Lalibertea

    E-Print Network [OSTI]

    UAS remote sensing missions for rangeland applications Andrea S. Lalibertea *, Craig Wintersb surface, are in remote areas and have low population densities, all of which provide an ideal opportunity for remote sensing applications from unmanned aircraft systems (UAS). In this article, we describe a proven

  15. Remote Homolog Detection Using Local SequenceStructure Correlations

    E-Print Network [OSTI]

    Bystroff, Chris

    Remote Homolog Detection Using Local Sequence­Structure Correlations Yuna Hou,1* Wynne Hsu,1 Mong 2 Department of Biology, Rensselaer Polytechnic Institute, Troy, New York ABSTRACT Remote homology similarity. In this article, we present a remote homolog detection method called SVM-HMMSTR that overcomes

  16. Remote Sensing Messungen zur on-road Bestimmung der

    E-Print Network [OSTI]

    Denver, University of

    LUBETRAX Remote Sensing Messungen zur on-road Bestimmung der Abgase von schweren Motorfahrzeugen, Chur, Zürich, Brugg Dr. Peter Maly (Projektleitung) Dr. Stefan Scherer Dr. G.A. Bishop (Remote Sensing;Inhaltsverzeichnis Zusammenfassung 1 1. Einleitung und Zielsetzung 3 1.1 Remote Sensing Messungen (FEAT) 4 1

  17. Remote Sensing Applications for Sustainable Aquaculture in Africa

    E-Print Network [OSTI]

    Jiang, Wen

    Remote Sensing Applications for Sustainable Aquaculture in Africa Joseph E. Quansah1 , Gilbert L of the science with respect to remote sensing applications for aquaculture, including site location, aquaculture for multi-sensor remote sensing deployment to support sustainable fish production in these environments

  18. Remote-Spanners: What to Know beyond Neighbors Philippe Jacquet

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Remote-Spanners: What to Know beyond Neighbors Philippe Jacquet INRIA Rocquencourt, France philippe are generally known in practical routing algorithms, we introduce the notion of remote-spanner. Given an unweighted graph G, a sub-graph H with vertex set V (H) = V (G) is an (, )-remote-spanner if for each pair

  19. Remote Control and Receiver-Transceiver Specifications and

    E-Print Network [OSTI]

    Rajamani, Sriram K.

    Remote Control and Receiver- Transceiver Specifications and Requirements for Windows Media Center hardware vendors (IHVs) and PC OEM partners who want to create remote control and receiver device combinations that decode input from the remote control for Windows Media Center. This document provides details

  20. Remote Stabilization via Communication Networks with a Distributed Control Law

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Remote Stabilization via Communication Networks with a Distributed Control Law Emmanuel Witrant the problem of remote stabilization via communication networks involving some time- varying delays of known average dynamics. This problem arises when the control law is remotely implemented and leads

  1. Remote Sensing of Natural Areas: Procedures and Considerations for

    E-Print Network [OSTI]

    1 Remote Sensing of Natural Areas: Procedures and Considerations for Assessing Stress and Pollution Jason Goldberg, James Perry, and John Anderson Coastal Ecosystems and Remote Sensing Program Introduction Remote sensing can be defined as the acquisi- tion and measurement of data/information on some

  2. Remote Sensing of Western-Caribbean Coral Communities

    E-Print Network [OSTI]

    Nebraska-Lincoln, University of

    Remote Sensing of Western-Caribbean Coral Communities Introduction: Despite the fact that coral. Remote sensing has been suggested as a potential tool for monitoring the spatial extent, health the Spectral Reflectance of Corals In-Situ. GIScience and Remote Sensing. Maeder, J., Narumalani, S., Rundquist

  3. T-704: RSA enVision Lets Remote Users View Files and Remote Authentica...

    Broader source: Energy.gov (indexed) [DOE]

    Allows remote attackers to obtain sensitive information by sniffing the network or leveraging access to a recipient mailbox. PLATFORM: RSA enVision Version(s): 3.x, 4.x ABSTRACT:...

  4. Remote Sens. 2013, 5, 927-948; doi:10.3390/rs5020927 Remote Sensing

    E-Print Network [OSTI]

    Myneni, Ranga B.

    Active Radiation absorbed by vegetation (FPAR) are critical to OPEN ACCESS #12;Remote Sens. 2013, 5 928) correlations of dominant modes of interannual variability with large-scale circulation anomalies such as the EI

  5. REFERENCE: Introduction to Remote Sensing. James B.

    E-Print Network [OSTI]

    Gilbes, Fernando

    -viewing Wide Field-of-view Sensor (SeaWiFS) Advance Very High Resolution Radiometer (AVHRR) Synthetic Temperature #12;ACTIVE REMOTE SENSING The sensor illuminates the terrain with its own energy, then records the reflected energy as it has been altered by the earth's surface. #12;SIDE-LOOKING AIRBORNE RADAR SLAR #12

  6. Automated transmission line fault analysis using synchronized sampling at two ends

    SciTech Connect (OSTI)

    Kezunovic, M. [Texas A and M Univ., College Station, TX (United States)] [Texas A and M Univ., College Station, TX (United States); Perunicic, B. [Lamar Univ., Beaumont, TX (United States)] [Lamar Univ., Beaumont, TX (United States)

    1996-02-01T23:59:59.000Z

    This paper introduces a new approach to fault analysis using synchronized sampling. A digital fault recorder with Global Positioning System (GPS) satellite receiver is the source of data for this approach. Fault analysis functions, such as fault detection, classification and location are implemented for a transmission line using synchronized samples from two ends of a line. This technique can be extremely fast, selective and accurate, providing fault analysis performance that can not easily be matched by other known techniques.

  7. Automated transmission line fault analysis using synchronized sampling at two ends

    SciTech Connect (OSTI)

    Kezunovic, M. [Texas A and M Univ., College Station, TX (United States); Perunicic, B. [Lamar Univ., Beaumont, TX (United States)

    1995-12-31T23:59:59.000Z

    This paper introduces a new approach to fault analysis using synchronized sampling. A digital fault recorder with Global Positioning System (GPS) satellite receiver is the source of data for this approach. Fault analysis functions, such as fault detection, classification and location are implemented for a transmission line using synchronized samples from two ends of a line. This technique can be extremely fast, selective and accurate, providing fault analysis performance that can not easily be matched by other known techniques.

  8. C-testability of a ripple carry adder under multiple faults

    E-Print Network [OSTI]

    Bommena, Manoher V.

    1992-01-01T23:59:59.000Z

    . Fault Types IV FAULT SIMULATION AND EXPERIMENT . A. Physical Line Fault Simulation . 1. Layout 2. Simulation B. Functional Fault Simulation and Experiment . 1. Probability of Un-detection 2. Efficiency of the Test Vectors and Reduced Test V... RESULTS VI CONCLUSIONS AND RECOMMENDATIONS 9 10 12 18 18 19 22 27 27 Set . 30 REFERENCES 41 APPENDIX A APPENDIX B . Page APPENDIX C . I. IST OF TABLES TABLE Page I Expressions from the physical line fault simulation stage 24 II...

  9. Geobotanical Remote Sensing Applied To Targeting New Geothermal...

    Open Energy Info (EERE)

    on recent successes in mapping hidden faults, high temperature altered mineralization, clays, hot and cold springs and CO2 effluents the Long Valley Caldera and Mammoth Mountain...

  10. anatolian fault zone: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    across the Mudurnu segment of the North Anatolian Fault Zone (NAFZ) in northwestern Turkey Ben-Zion, Yehuda 2 Velocity contrast across the 1944 rupture zone of the North...

  11. An information model for inter-organizational fault Patricia Marcu

    E-Print Network [OSTI]

    in the IT Infrastructure Library (ITIL) [2] and related frameworks in the area of IT service management (ITSM). But since ITIL and the related ITSM frameworks do not consider specific aspects of inter- organizational (fault

  12. Melt generation, crystallization, and extraction beneath segmented oceanic transform faults

    E-Print Network [OSTI]

    Gregg, Patricia M.

    We examine mantle melting, fractional crystallization, and melt extraction beneath fast slipping, segmented oceanic transform fault systems. Three-dimensional mantle flow and thermal structures are calculated using a ...

  13. Non-intrusive fault detection in reciprocating compressors

    E-Print Network [OSTI]

    Schantz, Christopher James

    2011-01-01T23:59:59.000Z

    This thesis presents a set of techniques for non-intrusive sensing and fault detection in reciprocating compressors driven by induction motors. The procedures developed here are "non-intrusive" because they rely only on ...

  14. andreas fault system: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    system Sontag, Eduardo 23 The San Andreas Fault In The San Francisco Bay Area, California: A Geology Fieldtrip Guidebook To Selected Stops On Public Lands CiteSeer Summary:...

  15. Detecting and tolerating Byzantine faults in database systems

    E-Print Network [OSTI]

    Vandiver, Benjamin Mead, 1978-

    2008-01-01T23:59:59.000Z

    This thesis describes the design, implementation, and evaluation of a replication scheme to handle Byzantine faults in transaction processing database systems. The scheme compares answers from queries and updates on multiple ...

  16. Detecting and Tolerating Byzantine Faults in Database Systems

    E-Print Network [OSTI]

    Vandiver, Benjamin Mead

    2008-06-30T23:59:59.000Z

    This thesis describes the design, implementation, and evaluation of a replication scheme to handle Byzantine faults in transaction processing database systems. The scheme compares answers from queries and updates on multiple ...

  17. Cryptic Faulting and Multi-Scale Geothermal Fluid Connections...

    Open Energy Info (EERE)

    from Mt Resistivity Surveying Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Cryptic Faulting and Multi-Scale Geothermal Fluid Connections in...

  18. Intersecting Fault Trends and Crustal-Scale Fluid Pathways Below...

    Open Energy Info (EERE)

    3d Magnetotelluric Surveying Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Intersecting Fault Trends and Crustal-Scale Fluid Pathways Below...

  19. STRESS AND FAULTING IN THE COSO GEOTHERMAL FIELD: UPDATE AND...

    Open Energy Info (EERE)

    THE EAST FLANK AND COSO WASH Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: STRESS AND FAULTING IN THE COSO GEOTHERMAL FIELD: UPDATE...

  20. arcing fault fires: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    stacking faults at a production-rate of few gmin. A guideline for controlling the number of layers of such FLG has also been suggested. Karmakar, Soumen; Lalla, Niranjan P;...

  1. assembly line fault: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of fault data to verify that all elements of the protection system Siegel, Mel 190 Bucket brigades on in-tree assembly networks John J. Bartholdi III a,*, Donald D. Eisenstein...

  2. Microgrid Fault Protection Based on Symmetrical and Differential Current Components

    E-Print Network [OSTI]

    Microgrid Fault Protection Based on Symmetrical and Differential Current Components Prepared.........................................................................................8 2. AEP CERTS MICROGRID .........................................................................9 ........................................................................67 #12;3 Index of Figures Figure 1: Schematic representation of the AEP CERTS microgrid

  3. Characteristics of Wind Turbines Under Normal and Fault Conditions: Preprint

    SciTech Connect (OSTI)

    Muljadi, E.; Butterfield, C. P.; Parsons, B.; Ellis, A.

    2007-02-01T23:59:59.000Z

    This paper investigates the characteristics of a variable-speed wind turbine connected to a stiff or weak grid under normal and fault conditions and the role of reactive power compensation.

  4. Fault Tolerant WideArea Parallel Computing Jon B. Weissman

    E-Print Network [OSTI]

    Weissman, Jon

    hosts go down and get rebooted, and network faults where links go down. A single monolithic solu­ tion not fit their assumptions, the maxim ``pay for what you need'' has been proposed as a guiding principle

  5. Faults as potential hydrocarbon barriers, Arroyo Grande, California

    E-Print Network [OSTI]

    Switek, Daniel Paul

    1994-01-01T23:59:59.000Z

    Faulting in a sandstone introduces properties which are different from the country rock. Previous work has shown that these new properties can significantly impede the flow of hydrocarbons through the country rock. This thesis seeks to analyze...

  6. Robust model-based fault diagnosis for chemical process systems

    E-Print Network [OSTI]

    Rajaraman, Srinivasan

    2006-08-16T23:59:59.000Z

    Fault detection and diagnosis have gained central importance in the chemical process industries over the past decade. This is due to several reasons, one of them being that copious amount of data is available from a large number of sensors...

  7. Analysis of transmission system faults in the phase domain

    E-Print Network [OSTI]

    Zhu, Jun

    2004-11-15T23:59:59.000Z

    In order to maintain a continuous power suppply, nowadays relays in transmission systems are required to be able to deal with complicated faults involving non-conventional connections, which poses a challenge to the short circuit analysis...

  8. Controls on Fault-Hosted Fluid Flow: Preliminary Results from...

    Open Energy Info (EERE)

    Geothermal Field, CA Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: Controls on Fault-Hosted Fluid Flow: Preliminary Results from the...

  9. analysis fault reactivation: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    23 24 25 Next Page Last Page Topic Index 81 System level Analysis of Fault Effect in an Automotive Environment CiteSeer Summary: In the last years, new requirements in terms of...

  10. Understanding Fault Characteristics And Sediment Depth For Geothermal...

    Open Energy Info (EERE)

    of primarily E-W directed extension along N-NNW striking normal faults. Water well drilling on the eastern slopes of the Wassuk Range, west of the city of Hawthorne, Nevada...

  11. Robust model-based fault diagnosis for chemical process systems 

    E-Print Network [OSTI]

    Rajaraman, Srinivasan

    2006-08-16T23:59:59.000Z

    Fault detection and diagnosis have gained central importance in the chemical process industries over the past decade. This is due to several reasons, one of them being that copious amount of data is available from a large ...

  12. Identifying Efficiency Degrading Faults in Split Air Conditioning Systems

    E-Print Network [OSTI]

    Terrill, T. J.; Brown, M. L.; Cheyne, R. W. Jr.; Cousins, A. J.; Daniels, B. P.; Erb, K. L.; Garcia, P. A.; Leutermann, M. J.; Nel, A. J.; Robert, C. L.; Widger, S. B.; Williams, A. G.; Rasmussen, B. P.

    2013-01-01T23:59:59.000Z

    Studies estimate that as much as 50% of packaged air conditioning systems operate in faulty conditions that degrade system efficiency. Common faults include: under- and over-charged systems (too much or too little refrigerant), faulty expansions...

  13. Neural net application to transmission line fault detection and classification

    E-Print Network [OSTI]

    Rikalo, Igor

    1994-01-01T23:59:59.000Z

    . So far, several NN implementations for various fault diagnosis problems have been reported in the literature. A number of papers describing NN applications in pov er systems categorized in appropriate groups can be found in [19, 20]. 1. 3. Thesis... important issue for stable and reliable operation of pov;er systems. The main target of the fault analysis are circuit breaker and protection relay operations. The task of the analysis is to reach a conclusion about the current state of the electrical...

  14. Two Similarity Measure Approaches to Whole Building Fault Diagnosis

    E-Print Network [OSTI]

    Lin, G.; Claridge, D.

    2012-01-01T23:59:59.000Z

    consumption in buildings using similarity measures. The method is referred to as the cosine similarity method if cosine similarity is adopted and is referred to as the Euclidean distance similarity method if Euclidean distance similarity is implemented.... Fig. 1 Block diagram for diagnosing abnormal energy consumption Step 1: Reference Control Change Library Determination Whole building fault diagnosis is different from component level fault diagnosis. It can only give a general clue, for example...

  15. Mechanical properties and fabric of the Punchbowl fault zone, California

    E-Print Network [OSTI]

    Chester, Frederick Michael

    1983-01-01T23:59:59.000Z

    MECHANICAL PROPERIIES AND FABRIC OF THE PUiVCHBOlv'L FAULT ZONE, CALIFORNIA A Thesis by FREDERICK MICHAEL CHESTER Subm-', tted to the Graduate College of Texas ABM University in partial fulfillment of the requirements for the degree... of MASTER OF SCIENCE December 1983 Major Subject: Geology MECHANICAL PROPERTIES AND FABRIC OF THE PUNCHBOWL FAULT ZONE, CALIFORNIA A Thesis by FREDERICK MICHAEL CHESTER Approved as to sty1e and content by: on . . an airman o ommittee) Me1vin edman...

  16. Analysis of faults using gravity methods in Mason County, Texas

    E-Print Network [OSTI]

    Milligan, Michael Glen

    1992-01-01T23:59:59.000Z

    Committee: Dr. D. A. Fahlquist Dr. B. Johnson The objective of this study is to determine the applicability of gravity profiling methods for determining the location and throw of a series of faults related to a structural graben in northern Mason County... profiles. For two faults with the best geologic control, the best-fit gravity models compared favorably with the the geologic model constructed by Randolph (1991) on the basis of surface mapping, structural control and well control. The gravity models...

  17. The application of satellite time references to HVDC fault location

    SciTech Connect (OSTI)

    Dewe, M.B.; Sankar, S.; Arrillaga, J. (Univ. of Canterbury, Christchurch (New Zealand))

    1993-07-01T23:59:59.000Z

    An HVdc fault location scheme is described which relies on very precise detection of the time of arrival of fault created surges at both ends of the line. Such detection is achieved by a very accurate data acquisition and processing system combined with the time reference signals provided by a global positioning system receiver. Extensive digital simulation is carried out to determine the voltage and current waveforms, to identify the main sources of error and suggest possible compensation techniques.

  18. Occupancy Based Fault Detection on Building Level - a Feasibility Study

    E-Print Network [OSTI]

    Tuip, B.; Houten, M.; Trcka, M.; Hensen, M.

    2010-01-01T23:59:59.000Z

    -going commissioning and fault detection and diagnostics (FDD) has been performed to improve the current situation of building problems by comparing measured building performance with design predictions [Portland 2003]. For fault detection, different methods... conference on building commissioning, Portland Energy Conservation. Portland. 2003. Methods for automated and continuous commissioning of building systems. US department of commerce, Portland energy conservation inc. Schijndel, A.W.M. van, 2008...

  19. Microcomputer applications of, and modifications to, the modular fault trees

    SciTech Connect (OSTI)

    Zimmerman, T.L.; Graves, N.L.; Payne, A.C. Jr.; Whitehead, D.W. [Sandia National Labs., Albuquerque, NM (United States)] [Sandia National Labs., Albuquerque, NM (United States)

    1994-10-01T23:59:59.000Z

    The LaSalle Probabilistic Risk Assessment was the first major application of the modular logic fault trees after the IREP program. In the process of performing the analysis, many errors were discovered in the fault tree modules that led to difficulties in combining the modules to form the final system fault trees. These errors are corrected in the revised modules listed in this report. In addition, the application of the modules in terms of editing them and forming them into the system fault trees was inefficient. Originally, the editing had to be done line by line and no error checking was performed by the computer. This led to many typos and other logic errors in the construction of the modular fault tree files. Two programs were written to help alleviate this problem: (1) MODEDIT - This program allows an operator to retrieve a file for editing, edit the file for the plant specific application, perform some general error checking while the file is being modified, and store the file for later use, and (2) INDEX - This program checks that the modules that are supposed to form one fault tree all link up appropriately before the files are,loaded onto the mainframe computer. Lastly, the modules were not designed for relay type logic common in BWR designs but for solid state type logic. Some additional modules were defined for modeling relay logic, and an explanation and example of their use are included in this report.

  20. Remote controlled-NOT gate of d-dimension

    E-Print Network [OSTI]

    Gui-Fang Dang; Heng Fan

    2008-01-23T23:59:59.000Z

    Single qubit rotation gate and the controlled-NOT (CNOT) gate constitute a complete set of gates for universal quantum computation. In general the CNOT gate are only for two nearby qubits. For two qubits which are remote from each other, we need a series of swap gates to transfer these two qubits to the nearest neighboring sites, and then after the CNOT gate we should transfer them to their original sites again. However, a series of swap gates are resource for quantum information processing. One economy way which does not consume so much resource is to implement CNOT gate remotely. The remote CNOT gate is to implement the CNOT gate for two remotely separated qubits with the help of one additional maximally entangled state. The original remote CNOT gate is for two qubits, here we will present the d-dimensional remote CNOT gate. The role of quantum teleportation is identified in the process of the remote CNOT gate.

  1. The San Andreas Fault System Paul Withers Wallace RE, The San Andreas Fault System, California, USGS Professional Paper 1515,

    E-Print Network [OSTI]

    Withers, Paul

    mainland Mexico. The San Andreas fault is commonly referred to as the boundary between the Pacific is correlated with the local geological setting. CO2 lubrication, #12;increased pore pressure, and decreased

  2. Abstract--A method for fault detection and isolation is proposed and applied to inverter faults in multi-phase drives. An

    E-Print Network [OSTI]

    Boyer, Edmond

    energy source, a five- leg inverter and a five-phase star-connected PMSM. It has to be noticed that all-magnet synchronous machine (PMSM) drive. The faults under consideration are: open-phase faults and open-switch faults

  3. Applications of Remote Sensing Techniques to Identify Major Faults in the Island of Puerto Rico using SAR and SLAR images

    E-Print Network [OSTI]

    Gilbes, Fernando

    Rico using SAR and SLAR images Ashlyann Arana Morales1 , Daniel J. Mercado Rosario2 1 Bo Tanama 1B Calle 1 Arecibo P.R, 00612-5578, ashlyann.arana@upr.edu 2 #15 Calle Iglesia Quebradilla P.R, 00678

  4. Automatic calibration of a building energy performance model and remote fault detection for continuous commissioning using a global optimization program

    E-Print Network [OSTI]

    Lee, Seung Uk

    2002-01-01T23:59:59.000Z

    for energy waste. 2) An nnportant characteristic of this automated calibration process is that it may be possible to effectively use short-term measurements. The Short Term Energy Monitoring (STEM) is a method that Subbarao et al. (1990), Balcomb et al... %). The apparent savings fiom the retrofit of the DDCV system with VAV was about 684 GJ in cooling energy and 324 GJ in heating energy for a three-week period in June-July 1991. Balcomb et al. (1994) used the short-term energy monitoring (STEM) method...

  5. Simplifying Tensor Polynomials with Indices

    E-Print Network [OSTI]

    A. Balfagon; X. Jaen

    1998-09-22T23:59:59.000Z

    We are presenting an algorithm capable of simplifying tensor polynomials with indices when the building tensors have index symmetry properties. These properties include simple symmetry, cyclicity and those due to the presence of partial and covariant derivatives. We are also including some examples using the Riemann tensor as a paradigm. The algorithm is part of a Mathematica package called Tools of Tensor Calculus (TTC) [web address: http://baldufa.upc.es/ttc

  6. Characterizing fault-plume intersection probability for geologic carbon sequestration risk assessment

    SciTech Connect (OSTI)

    Jordan, Preston D.; Oldenburg, Curtis M.; Nicot, Jean-Philippe

    2008-11-01T23:59:59.000Z

    Leakage of CO{sub 2} out of the designated storage region via faults is a widely recognized concern for geologic carbon sequestration. The probability of such leakage can be separated into the probability of a plume encountering a fault and the probability of flow along such a fault. In the absence of deterministic fault location information, the first probability can be calculated from regional fault population statistics and modeling of the plume shape and size. In this study, fault statistical parameters were measured or estimated for WESTCARB's Phase III pilot test injection in the San Joaquin Valley, California. Combining CO{sub 2} plume model predictions with estimated fault characteristics resulted in a 3% probability that the CO{sub 2} plume will encounter a fault fully offsetting the 180 m (590 ft) thick seal. The probability of leakage is lower, likely much lower, as faults with this offset are probably low-permeability features in this area.

  7. Self-referencing remote optical probe

    DOE Patents [OSTI]

    O'Rourke, P.E.; Prather, W.S.; Livingston, R.R.

    1991-08-13T23:59:59.000Z

    A probe is described for remote spectrometric measurements of fluid samples having a hollow probe body with a sliding reflective plug therein and a lens at one end, ports for admitting and expelling the fluid sample and a means for moving the reflector so that reference measurement can be made with the reflector in a first position near the lens and a sample measurement can be made with the reflector away from the lens and the fluid sample between the reflector and the lens. Comparison of the two measurements will yield the composition of the fluid sample. The probe is preferably used for remote measurements and light is carried to and from the probe via fiber optic cables. 3 figures.

  8. Portsmouth X300 remote assay monitor system

    SciTech Connect (OSTI)

    Smith, D.E.

    1996-07-01T23:59:59.000Z

    Personnel in the Instrumentation and Controls Division at Oak Ridge National Laboratory (ORNL) in association with the United States Enrichment Corporation (USEC) have recently developed a system for monitoring and tracking the assay of enriched uranium from the production facilities at the Portsmouth Gaseous Diffusion Plant (PORTS). This work was sponsored by the USEC and has involved the expansion and improvement of an existing system that was developed by ORNL. The system provides control room operators with real-time information on the withdrawal operations of uranium hexafluoride at the withdrawal stations at PORTS. An additional system was developed to display the real-time information from each of the three withdrawal stations at a remotely located building. This report describes the remote assay monitor and display system that has been developed and installed at PORTS Building X300.

  9. Remote State Preparation of Mental Information

    E-Print Network [OSTI]

    Patrizio E. Tressoldi; Andrei Khrennikov

    2012-07-26T23:59:59.000Z

    The aim of this paper is to define in theoretical terms and summarise the available experimental evidence that physical and mental "objects", if considered "information units", may present similar classical and quantum models of communication beyond their specific characteristics. Starting with the Remote State Preparation protocol, a variant of the Teleportation protocol, for which formal models and experimental evidence are already available in quantum mechanics, we outline a formal model applied to mental information we defined Remote State Preparation of Mental Information (RSPMI), and we summarise the experimental evidence supporting the feasibility of a RSPMI protocol. The available experimental evidence offers strong support to the possibility of real communication at distance of mental information promoting the integration between disciplines that have as their object of knowledge different aspects of reality, both physical and the mental, leading to a significant paradigm shift in cognitive and information science.

  10. Unitary reflection groups for quantum fault tolerance

    E-Print Network [OSTI]

    Michel Planat; Maurice R. Kibler

    2009-02-24T23:59:59.000Z

    This paper explores the representation of quantum computing in terms of unitary reflections (unitary transformations that leave invariant a hyperplane of a vector space). The symmetries of qubit systems are found to be supported by Euclidean real reflections (i.e., Coxeter groups) or by specific imprimitive reflection groups, introduced (but not named) in a recent paper [Planat M and Jorrand Ph 2008, {\\it J Phys A: Math Theor} {\\bf 41}, 182001]. The automorphisms of multiple qubit systems are found to relate to some Clifford operations once the corresponding group of reflections is identified. For a short list, one may point out the Coxeter systems of type $B_3$ and $G_2$ (for single qubits), $D_5$ and $A_4$ (for two qubits), $E_7$ and $E_6$ (for three qubits), the complex reflection groups $G(2^l,2,5)$ and groups No 9 and 31 in the Shephard-Todd list. The relevant fault tolerant subsets of the Clifford groups (the Bell groups) are generated by the Hadamard gate, the $\\pi/4$ phase gate and an entangling (braid) gate [Kauffman L H and Lomonaco S J 2004 {\\it New J. of Phys.} {\\bf 6}, 134]. Links to the topological view of quantum computing, the lattice approach and the geometry of smooth cubic surfaces are discussed.

  11. Unitary reflection groups for quantum fault tolerance

    E-Print Network [OSTI]

    Planat, Michel

    2008-01-01T23:59:59.000Z

    This paper explores the representation of quantum computing in terms of unitary reflections (unitary transformations that leaves invariant a hyperplane of a vector space). The symmetries of qubit systems are found to be supported by Euclidean real reflections (i.e., Coxeter groups) or by specific imprimitive reflection groups, introduced (but not named) in a recent paper [Planat M and Jorrand Ph 2008, J Phys A: Math Theor 41, 182001]. The automorphisms of multiple qubit systems are found to relate to some Clifford operations once the corresponding group of reflections is identified. For a short list, one may point out the Coxeter systems of type B3 and G2 (for single qubits), D5 and A4 (for two qubits), E7 and E6 (for three qubits), and the complex reflection groups G(2l, 2, 5). The relevant fault tolerant groups of reflections (the Bell groups) are generated, as subgroups of the Clifford groups, by the Hadamard gate, the $\\pi$/4 phase gate and an entangling (braid) gate [Kauffman L H and Lomonaco S J 2004 Ne...

  12. Remote quantum gates mediated by spin chains

    E-Print Network [OSTI]

    R. Ronke; I. D'Amico; T. P. Spiller

    2010-03-09T23:59:59.000Z

    There has been much recent study on the application of spin chains to quantum state transfer and communication. Here we demonstrate that spin chains set up for perfect quantum state transfer can be utilised to generate remote quantum gates, between spin qubits injected at the ends of the chain. The natural evolution of the system across different excitation number sectors generates a maximally-entangling and universal gate between the injected qubits, independent of the length of the chain.

  13. Techniques for remotely sensing watershed runoff potential

    E-Print Network [OSTI]

    Walker, Jerry Don

    1978-01-01T23:59:59.000Z

    Techniques for Remotely Sensing Watershed Runoff Potential. (August 1978) Jerry Don Walker, B. S. , Texas ASM University Directed by: Dr. Bruce J. Blanchard The Soil Conservation Service runoff equation is widely used for predicting the watershed runoff... cases, no outflow occurs through the spillway of an overdes1gned structure. Since evaporation losses are high 1n these areas, the salinity of the water stored in the structure gradually increases with time. With insufficient flow through...

  14. Remote/New sites: Many Field

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Technical s o Freiberge s 3 c/) ReleaseRemote

  15. Remote controlled vacuum joint closure mechanism

    DOE Patents [OSTI]

    Doll, David W. (San Diego, CA); Hager, E. Randolph (La Jolla, CA)

    1986-01-01T23:59:59.000Z

    A remotely operable and maintainable vacuum joint closure mechanism for a noncircular aperture is disclosed. The closure mechanism includes an extendible bellows coupled at one end to a noncircular duct and at its other end to a flange assembly having sealed grooves for establishing a high vacuum seal with the abutting surface of a facing flange which includes an aperture forming part of the system to be evacuated. A plurality of generally linear arrangements of pivotally coupled linkages and piston combinations are mounted around the outer surface of the duct and aligned along the length thereof. Each of the piston/linkage assemblies is adapted to engage the flange assembly by means of a respective piston and is further coupled to a remote controlled piston drive shaft to permit each of the linkages positioned on a respective flat outer surface of the duct to simultaneously and uniformly displace a corresponding piston and the flange assembly with which it is in contact along the length of the duct in extending the bellows to provide a high vacuum seal between the movable flange and the facing flange. A plurality of latch mechanisms are also pivotally mounted on the outside of the duct. A first end of each of the latch mechanisms is coupled to a remotely controlled latch control shaft for displacing the latch mechanism about its pivot point. In response to the pivoting displacement of the latch mechanism, a second end thereof is displaced so as to securely engage the facing flange.

  16. Remote state preparation of spatial qubits

    E-Print Network [OSTI]

    M. A. Solís-Prosser; L. Neves

    2011-08-17T23:59:59.000Z

    We study the quantum communication protocol of remote state preparation (RSP) for pure states of qubits encoded in single photons transmitted through a double slit, the so-called spatial qubits. Two measurement strategies that one can adopt to remotely prepare the states are discussed. The first strategy is the well-known spatial postselection, where a single-pixel detector measures the transverse position of the photon between the focal and the image plane of a lens. The second strategy, proposed by ourselves, is a generalized measurement divided into two steps: the implementation of a two-outcome positive operator-valued measurement (POVM) followed by the spatial postselection at the focal plane of the lens by a two-pixel detector in each output of the POVM. In both cases we analyze the effects of the finite spatial resolution of the detectors over three figures of merit of the protocol, namely, the probability of preparation, the fidelity and purity of the remotely prepared states. It is shown that our strategy improves these figures compared with spatial postselection, at the expense of increasing the classical communication cost as well as the required experimental resources. In addition, we present a modified version of our strategy for RSP of spatial qudits which is able to prepare arbitrary pure states, unlike spatial postselection alone. We expect that our study may also be extended for RSP of the angular spectrum of a single-photon field as an alternative for quantum teleportation which requires very inefficient nonlinear interactions.

  17. Corrosion indicating equipment UK-1

    SciTech Connect (OSTI)

    Gerasimenko, Y.S.; Abrosimov, V.S.; Rudenko, A.K.; Sorokin, V.I.

    1986-11-01T23:59:59.000Z

    UK-1, developed and introduced into oil industry corrosion-indicating equipment, has been developed on the basis of the principle of measurements of polarization resistance. It is designed for determining the corrosion activity of effluents of oil fields. The technical data and design of the equipment is discussed. The investigations were carried out on 08kp steel in simulation effluents of oil fields in the presence of corrosion inhibitors used in the oil industry at various temperatures (25-50 C) and liquid flow rate.

  18. Joint use of network analyzer and digital computer for simultaneous fault determinations

    E-Print Network [OSTI]

    Kilmer, Robert Earl

    1958-01-01T23:59:59.000Z

    " on the A, C. Network Calculator. 2. Depending upon the ty?e of faults, the networks are interconnected to satisi'y C . arke'. , equatrcns. Tc com- pletely satrsfy the equations for pecral ccmbrnations oi' fault , such as line-to-ground fault on ph- e a... networks to represent - simultan- eous line-to-ground fault on phase a at point C, and a line ? to-line fault between phases b and c at point D (a); and simultaneous line-to-ground faults on phases a and at points C and D (b). at two points, Fig. 1 b...

  19. Evaluation of a Decoupling-Based Fault Detection and Diagnostic Technique - Part II: Field Evaluation and Application

    E-Print Network [OSTI]

    Li, H.; Braun, J.

    2006-01-01T23:59:59.000Z

    Existing methods addressing automated fault detection and diagnosis (FDD) for vapor compression air conditioning system have good performance for faults that occur individually, but they have difficulty in handling multiple-simultaneous faults...

  20. Landscape Scale Impacts of Sea Level Rise and Elevation Changes Along the Matagorda Fault in Matagorda, Texas

    E-Print Network [OSTI]

    Cline, Marie

    2012-10-19T23:59:59.000Z

    Movement of growth faults, a type of normal fault which is formed during sedimentation and is characterized by having greater vertical thickness on the downthrown fault side, on barrier islands contributes to wetland losses. The opening objective...

  1. Using Remote Desktop with the Cisco AnyConnect VPN Client in Windows Vista 1. In order to use Remote Desktop and the VPN client, users must first complete the Blackboard Remote

    E-Print Network [OSTI]

    Using Remote Desktop with the Cisco AnyConnect VPN Client in Windows Vista 1. In order to use Remote Desktop and the VPN client, users must first complete the Blackboard Remote Users training course and then download and install the VPN client on the workstation that they will use to remote to their office

  2. Using Remote Desktop with the Cisco AnyConnect VPN Client in Windows XP 1. In order to use Remote Desktop and the VPN client, users must first complete the Blackboard Remote

    E-Print Network [OSTI]

    Using Remote Desktop with the Cisco AnyConnect VPN Client in Windows XP 1. In order to use Remote Desktop and the VPN client, users must first complete the Blackboard Remote Users training course and then download and install the VPN client on the workstation that they will use to remote to their office

  3. Use Remote Sensing Data (selected visible and infrared spectrums...

    Broader source: Energy.gov (indexed) [DOE]

    Use Remote Sensing Data (selected visible and infrared spectrums) to locate high temperature ground anomalies in Colorado. Confirm heat flow potential with on-site surveys to drill...

  4. Use Remote Sensing Data (selected visible and infrared spectrums...

    Broader source: Energy.gov (indexed) [DOE]

    City - May 19, 2010 * Project Title - "Use Remote Sensing Data (selected visible and infrared spectrums) to locate high temperature ground anomalies in Colorado. Confirm heat flow...

  5. Method of determining forest production from remotely sensed forest parameters

    DOE Patents [OSTI]

    Corey, J.C.; Mackey, H.E. Jr.

    1987-08-31T23:59:59.000Z

    A method of determining forest production entirely from remotely sensed data in which remotely sensed multispectral scanner (MSS) data on forest 5 composition is combined with remotely sensed radar imaging data on forest stand biophysical parameters to provide a measure of forest production. A high correlation has been found to exist between the remotely sensed radar imaging data and on site measurements of biophysical 10 parameters such as stand height, diameter at breast height, total tree height, mean area per tree, and timber stand volume.

  6. Microsoft Word - GHGT11_Litynski_Remote Sensing.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Litynski et al. Energy Procedia 00 (2012) 000-000 Keywords: DOE, NETL, Regional Carbon Sequestration Partnerships, Remote Sensing, Surface Displacement, Passive Scanner,...

  7. Alternative Carriers For Remote Renewable Energy Sources Using...

    Open Energy Info (EERE)

    Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Alternative Carriers For Remote Renewable Energy Sources Using Existing Cng Infrastructure...

  8. JLab Guest Lecturer Discusses Hurricane Hunting - By Remote Control...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    boundary layer and will provide invaluable ground truth for satellite and aircraft remote sensor measurements. Analyses from these two UAS tropical cyclone missions will be...

  9. U-051: Skype Discloses IP Addresses to Remote Users | Department...

    Broader source: Energy.gov (indexed) [DOE]

    available at the time of this entry. Addthis Related Articles U-047: Siemens Automation License Manager Bugs Let Remote Users Deny Service or Execute Arbitrary Code U-048:...

  10. Community Energy Planning A Resource Guide for Remote Communities...

    Open Energy Info (EERE)

    Canada Jump to: navigation, search Name Community Energy Planning A Resource Guide for Remote Communities in Canada AgencyCompany Organization Natural Resources Canada Sector...

  11. U-262: Microsoft Internet Explorer Flaw Lets Remote Users Execute...

    Broader source: Energy.gov (indexed) [DOE]

    Microsoft Internet Explorer Flaw Lets Remote Users Execute Arbitrary Code PLATFORM: Internet Explorer 6, 7, 8, 9 ABSTRACT: A vulnerability was reported in Microsoft Internet...

  12. V-103: RSA Authentication Agent Lets Remote Users Bypass Authenticatio...

    Broader source: Energy.gov (indexed) [DOE]

    RSA Authentication Agent Lets Remote Users Bypass Authentication Requirements PLATFORM: RSA Authentication Agent 7.1, 7.1.1 for Microsoft Windows ABSTRACT: A vulnerability was...

  13. Structural investigations at the Coso geothermal area using remote...

    Open Energy Info (EERE)

    investigations at the Coso geothermal area using remote sensing information, Inyo County, California Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal...

  14. Remote Detection Of Quaternary Borate Deposits With Aster Satellite...

    Open Energy Info (EERE)

    Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Remote Detection Of Quaternary Borate Deposits With Aster Satellite Imagery As A Geothermal...

  15. U-219: Symantec Web Gateway Input Validation Flaws Lets Remote...

    Broader source: Energy.gov (indexed) [DOE]

    9: Symantec Web Gateway Input Validation Flaws Lets Remote Users Inject SQL Commands, Execute Arbitrary Commands, and Change User Passwords U-219: Symantec Web Gateway Input...

  16. ADECENTRALIZED APPROACH TOWARDS AUTONOMOUS FAULT DETECTION IN WIRELESS STRUCTURAL HEALTH MONITORING SYSTEMS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    ADECENTRALIZED APPROACH TOWARDS AUTONOMOUS FAULT DETECTION IN WIRELESS STRUCTURAL HEALTH MONITORING structural health monitoring (SHM) systems may reduce the monitoring quality and, if remaining undetected : Autonomous fault detection, structural health monitoring, wireless sensor networks, smart sensors, analytical

  17. A methodology for experimentally verifying simulation models for distribution transformer internal faults

    E-Print Network [OSTI]

    Palmer-Buckle, Peter

    1999-01-01T23:59:59.000Z

    Internal winding faults comprise 70-80% of modem transformer breakdown. In this era of deregulation, this phenomenon is likely to increase since loading transformers to their optimum capacity is becoming normal practice. These internal faults result...

  18. The dynamics of oceanic transform faults : constraints from geophysical, geochemical, and geodynamical modeling

    E-Print Network [OSTI]

    Gregg, Patricia Michelle Marie

    2008-01-01T23:59:59.000Z

    Segmentation and crustal accretion at oceanic transform fault systems are investigated through a combination of geophysical data analysis and geodynamical and geochemical modeling. Chapter 1 examines the effect of fault ...

  19. Slip on ridge transform faults : insights from earthquakes and laboratory experiments

    E-Print Network [OSTI]

    Boettcher, Margaret S

    2005-01-01T23:59:59.000Z

    The relatively simple tectonic environment of mid-ocean ridge transform fault (RTF) seismicity provides a unique opportunity for investigation of earthquake and faulting processes. We develop a scaling model that is complete ...

  20. On strong fault tolerance (or strong Menger-connectivity) of multicomputer networks 

    E-Print Network [OSTI]

    Oh, Eunseuk

    2004-11-15T23:59:59.000Z

    As the size of networks increases continuously, dealing with networks with faulty nodes becomes unavoidable. In this dissertation, we introduce a new measure for network fault tolerance, the strong fault tolerance (or ...

  1. Finite element analysis of elastic interaction of two en echelon overlapping faults

    E-Print Network [OSTI]

    Leem, Junghun

    1995-01-01T23:59:59.000Z

    The primary objective is the analysis of the elastic stress fields and prediction of incipient secondary faulting associated with the interaction of two overlapping, en echelon faults with a sense of stepover opposite to the sense of shear...

  2. The structure and evolution of small-displacement strike-slip faults in porous sandstone

    E-Print Network [OSTI]

    Schafer, Kirk Wyatt

    2002-01-01T23:59:59.000Z

    The early-evolution of fault structure is inferred from analysis of detailed maps of portions of strike-slip faults with uniform displacements ranging from mm to decimeter in porous quartzose sandstone. Emphasis is on assessing the spatial...

  3. Effects of burial history, rock ductility and recovery magnitude on inversion of normal faulted strata

    E-Print Network [OSTI]

    Kuhle, Nathan John

    2001-01-01T23:59:59.000Z

    Inversion of normal faults at different burial depths is studied using physical models constructed with rock and deformed at confining pressure. Models consist of a 1 cm thick limestone layer above a fault dipping 70° in a rigid medium...

  4. Initiation propagation and termination of elastodynamic ruptures associated with segmentation of faults and shaking

    E-Print Network [OSTI]

    Shaw, Bruce E.

    Initiation propagation and termination of elastodynamic ruptures associated with segmentation the initiation, propagation, and termination of ruptures and their relationship to fault geometry and shaking of terminations near fault ends; and persistent propagation directivity effects. Taking advantage of long

  5. Advanced fault diagnosis techniques and their role in preventing cascading blackouts

    E-Print Network [OSTI]

    Zhang, Nan

    2007-04-25T23:59:59.000Z

    This dissertation studied new transmission line fault diagnosis approaches using new technologies and proposed a scheme to apply those techniques in preventing and mitigating cascading blackouts. The new fault diagnosis approaches are based on two...

  6. Fault-tolerant Partial-resonant High-frequency AC-link Converters and Their Applications

    E-Print Network [OSTI]

    Keyhani, Hamidreza

    2014-01-08T23:59:59.000Z

    concerns in addition to voltage and current scalabilities. Moreover, fault tolerance of power converters is becoming more and more essential in many applications, such as aerospace and subsea systems. Fault tolerance involves the detection...

  7. Detection of Rooftop Cooling Unit Faults Based on Electrical Measurements

    SciTech Connect (OSTI)

    Armstrong, Peter R.; Laughman, C R.; Leeb, S B.; Norford, L K.

    2006-01-31T23:59:59.000Z

    Non-intrusive load monitoring (NILM) is accomplished by sampling voltage and current at high rates and reducing the resulting start transients or harmonic contents to concise ''signatures''. Changes in these signatures can be used to detect, and in many cases directly diagnose, equipment and component faults associated with roof-top cooling units. Use of the NILM for fault detection and diagnosis (FDD) is important because (1) it complements other FDD schemes that are based on thermo-fluid sensors and analyses and (2) it is minimally intrusive (one measuring point in the relatively protected confines of the control panel) and therefore inherently reliable. This paper describes changes in the power signatures of fans and compressors that were found, experimentally and theoretically, to be useful for fault detection.

  8. Remote controlled vacuum joint closure mechanism

    DOE Patents [OSTI]

    Doll, D.W.; Hager, E.R.

    1984-02-22T23:59:59.000Z

    A remotely operable and maintainable vacuum joint closure mechanism for a noncircular aperture is disclosed. The closure mechanism includes an extendible bellows coupled at one end to a noncircular duct and at its other end to a flange assembly having sealed grooves for establishing a high vacuum seal with the abutting surface of a facing flange which includes an aperture forming part of the system to be evacuated. A plurality of generally linear arrangements of pivotally coupled linkages and piston combinations are mounted around the outer surface of the duct and aligned along the length thereof. Each of the piston/linkage assemblies is adapted to engage the flange assembly by means of a respective piston and is further coupled to a remote controlled piston drive shaft to permit each of the linkages positioned on a respective flat outer surface of the duct to simultaneously and uniformly displace a corresponding piston and the flange assembly with which it is in contact along the length of the duct in extending the bellows to provide a high vacuum seal between the movable flange and the facing flange. A plurality of latch mechanisms are also pivotally mounted on the outside of the duct. A first end of each of the latch mechanisms is coupled to a remotely controlled latch control shaft for displacing the latch mechanism about its pivot point. In response to the pivoting displacement of the latch mechanism, a second end thereof is displaced so as to securely engage the facing flange and maintain the high vacuum seal established by the displacement of the flange assembly and extension of the bellows without displacing the entire duct.

  9. An advanced unmanned vehicle for remote applications

    SciTech Connect (OSTI)

    Pletta, J.B.; Sackos, J.

    1998-03-01T23:59:59.000Z

    An autonomous mobile robotic capability is critical to developing remote work applications for hazardous environments. A few potential applications include humanitarian demining and ordnance neutralization, extraterrestrial science exploration, and hazardous waste cleanup. The ability of the remote platform to sense and maneuver within its environment is a basic technology requirement which is currently lacking. This enabling technology will open the door for force multiplication and cost effective solutions to remote operations. The ultimate goal of this work is to develop a mobile robotic platform that can identify and avoid local obstacles as it traverses from its current location to a specified destination. This goal directed autonomous navigation scheme uses the Global Positioning System (GPS) to identify the robot`s current coordinates in space and neural network processing of LADAR range images for local obstacle detection and avoidance. The initial year funding provided by this LDRD project has developed a small exterior mobile robotic development platform and a fieldable version of Sandia`s Scannerless Range Imager (SRI) system. The robotic testbed platform is based on the Surveillance And Reconnaissance ground Equipment (SARGE) robotic vehicle design recently developed for the US DoD. Contingent upon follow-on funding, future enhancements will develop neural network processing of the range map data to traverse unstructured exterior terrain while avoiding obstacles. The SRI will provide real-time range images to a neural network for autonomous guidance. Neural network processing of the range map data will allow real-time operation on a Pentium based embedded processor board.

  10. Tamper-indicating barcode and method

    DOE Patents [OSTI]

    Cummings, Eric B.; Even, Jr., William R.; Simmons, Blake A.; Dentinger, Paul Michael

    2005-03-22T23:59:59.000Z

    A novel tamper-indicating barcode methodology is disclosed that allows for detection of alteration to the barcode. The tamper-indicating methodology makes use of a tamper-indicating means that may be comprised of a particulate indicator, an optical indicator, a deformable substrate, and/or may be an integrated aspect of the barcode itself. This tamper-indicating information provides greater security for the contents of containers sealed with the tamper-indicating barcodes.

  11. Securing Remote Desktop for Windows XP http://www.mobydisk.com/./techres/securing_remote_desktop.html

    E-Print Network [OSTI]

    Major, Arkady

    an account lockout policy #12;There are already tools that will use brute-force to guess passwords and log-on remotely. You cannot stop this, but it can be minimized by setting an account lockout policy. If someone system. From the same Local Security Policy screen from before, go to Account Policies - Account Lockout

  12. Remote vacuum compaction of compressible hazardous waste

    DOE Patents [OSTI]

    Coyne, M.J.; Fiscus, G.M.; Sammel, A.G.

    1998-10-06T23:59:59.000Z

    A system is described for remote vacuum compaction and containment of low-level radioactive or hazardous waste comprising a vacuum source, a sealable first flexible container, and a sealable outer flexible container for receiving one or more first flexible containers. A method for compacting low level radioactive or hazardous waste materials at the point of generation comprising the steps of sealing the waste in a first flexible container, sealing one or more first containers within an outer flexible container, breaching the integrity of the first containers, evacuating the air from the inner and outer containers, and sealing the outer container shut. 8 figs.

  13. High aspect ratio, remote controlled pumping assembly

    DOE Patents [OSTI]

    Brown, Steve B. (Livermore, CA); Milanovich, Fred P. (Lafayette, CA)

    1995-01-01T23:59:59.000Z

    A miniature dual syringe-type pump assembly which has a high aspect ratio and which is remotely controlled, for use such as in a small diameter penetrometer cone or well packer used in water contamination applications. The pump assembly may be used to supply and remove a reagent to a water contamination sensor, for example, and includes a motor, gearhead and motor encoder assembly for turning a drive screw for an actuator which provides pushing on one syringe and pulling on the other syringe for injecting new reagent and withdrawing used reagent from an associated sensor.

  14. REMOTE AREA RADIATION MONITORING (RARM) ALTERNATIVES ANALYSIS

    SciTech Connect (OSTI)

    NELSON RL

    2008-07-18T23:59:59.000Z

    The Remote Area Radiation Monitoring (RARM) system will be used to provide real-time radiation monitoring information to the operations personnel during tank retrieval and transfer operations. The primary focus of the system is to detect potential anomalous (waste leaks) or transient radiological conditions. This system will provide mobile, real-time radiological monitoring, data logging, and status at pre-selected strategic points along the waste transfer route during tank retrieval operations. The system will provide early detection and response capabilities for the Retrieval and Closure Operations organization and Radiological Control personnel.

  15. Remote vacuum compaction of compressible hazardous waste

    DOE Patents [OSTI]

    Coyne, Martin J. (Pittsburgh, PA); Fiscus, Gregory M. (McMurray, PA); Sammel, Alfred G. (Pittsburgh, PA)

    1998-01-01T23:59:59.000Z

    A system for remote vacuum compaction and containment of low-level radioactive or hazardous waste comprising a vacuum source, a sealable first flexible container, and a sealable outer flexible container for receiving one or more first flexible containers. A method for compacting low level radioactive or hazardous waste materials at the point of generation comprising the steps of sealing the waste in a first flexible container, sealing one or more first containers within an outer flexible container, breaching the integrity of the first containers, evacuating the air from the inner and outer containers, and sealing the outer container shut.

  16. PV Charging System for Remote Area Operations

    SciTech Connect (OSTI)

    Ilsemann, Frederick; Thompson, Roger

    2008-07-31T23:59:59.000Z

    The objective of this project is to provide the public with a study of new as well existing technology to recharge batteries used in the field. A new product(s) will also be built based upon the information ascertained. American Electric Vehicles, Inc. (AEV) developed systems and methods suitable for charging state-of-the-art lithium-ion batteries in remote locations under both ideal and cloudy weather conditions. Conceptual designs are described for existing and next generation technology, particularly as regards solar cells, peak power trackers and batteries. Prototype system tests are reported.

  17. High aspect ratio, remote controlled pumping assembly

    DOE Patents [OSTI]

    Brown, S.B.; Milanovich, F.P.

    1995-11-14T23:59:59.000Z

    A miniature dual syringe-type pump assembly is described which has a high aspect ratio and which is remotely controlled, for use such as in a small diameter penetrometer cone or well packer used in water contamination applications. The pump assembly may be used to supply and remove a reagent to a water contamination sensor, for example, and includes a motor, gearhead and motor encoder assembly for turning a drive screw for an actuator which provides pushing on one syringe and pulling on the other syringe for injecting new reagent and withdrawing used reagent from an associated sensor. 4 figs.

  18. Remote preparation of an atomic quantum memory

    E-Print Network [OSTI]

    Wenjamin Rosenfeld; Stefan Berner; Juergen Volz; Markus Weber; Harald Weinfurter

    2006-08-29T23:59:59.000Z

    Storage and distribution of quantum information are key elements of quantum information processing and quantum communication. Here, using atom-photon entanglement as the main physical resource, we experimentally demonstrate the preparation of a distant atomic quantum memory. Applying a quantum teleportation protocol on a locally prepared state of a photonic qubit, we realized this so-called remote state preparation on a single, optically trapped 87Rb atom. We evaluated the performance of this scheme by the full tomography of the prepared atomic state, reaching an average fidelity of 82%.

  19. Space and Remote Sensing (ISR-2)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our Instagram Secretary Moniz9MorganYouofSolvingexplore2 Space and Remote Sensing

  20. REMOTE ACCESS SERVICES | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you sure you wantJoin us for| Department ofRightsSmart Sensors Mean EnergyREMOTE

  1. Multi-sensor Wireless System for Fault Detection in Induction Motors

    E-Print Network [OSTI]

    Tarkesh Esfahani, Ehsan

    2012-01-01T23:59:59.000Z

    Rotor bar damage and Stator winding imbalance, in the fault3) Bearing damage 4) Stator winding imbalance [2]. These

  2. Recognition criteria for young multiple surface ruptures along the Meers fault in southwestern Oklahoma

    E-Print Network [OSTI]

    Westen, Diane Paula

    1985-01-01T23:59:59.000Z

    fault planes in a stream cut exposure in young unconsolidated alluvium, and the possibility of segmentation based on changes in fault strike. The evidence suggests that abrupt, discrete stress-release events break the surface along different scarp-lines...) recognized the fault trace as a straight, continuous line cutting Permian sediments, remarkably fresh in appearance. He postulated that the fault was associated with intense orogenic movement of a deep-seated origin. Subsequent authors have associated...

  3. Frictional characteristics of serpentinite from the Motagua fault zone in Guatemala: an experimental study 

    E-Print Network [OSTI]

    Dengo, Carlos Arturo

    1978-01-01T23:59:59.000Z

    of the requirement for the degree of MASTER OF SCIENCE December 1978 Mad or Subjec' . " Geology FRICTIONAL CHARACTERISTIC OF SERPENTINITF. FRON THE I", OTAGUA FAULT ZONE Ili GUATENALA: AN EXPERIMENTAL STUDY A Thesis by CARLOS ARTURO DFNGO App", oved... strike-slip, seismogenic faults warrants a systematic i nvesti ga tion to determine ho v it". frictional characteristics may afreet slip along the fault. Five locations aiong the fault zone were sampled to investigate the sliding !rode as a function...

  4. Induced seismicity within geologic carbon sequestration projects: Maximum earthquake magnitude and leakage potential from undetected faults

    E-Print Network [OSTI]

    Mazzoldi, A.P.

    2014-01-01T23:59:59.000Z

    data from reservoir and outcrop samples suggest a general decrease in fault-zone permeability with increasing shale

  5. IEEE TRANSACTIONS ON POWER ELECTRONICS 1 A Fault-Tolerant Switching Scheme for an Isolated

    E-Print Network [OSTI]

    Mazumder, Sudip K.

    a model- reference adaptive system-based fault diagnosis algorithm for a VSI used as a PMSM drive system

  6. Fault-Tolerant Quantum Computation via Exchange interactions

    E-Print Network [OSTI]

    M. Mohseni; D. A. Lidar

    2004-06-25T23:59:59.000Z

    Quantum computation can be performed by encoding logical qubits into the states of two or more physical qubits, and controlling a single effective exchange interaction and possibly a global magnetic field. This "encoded universality" paradigm offers potential simplifications in quantum computer design since it does away with the need to perform single-qubit rotations. Here we show that encoded universality schemes can be combined with quantum error correction. In particular, we show explicitly how to perform fault-tolerant leakage correction, thus overcoming the main obstacle to fault-tolerant encoded universality.

  7. Mineralogical characterization of protolith and fault rocks from the SAFOD Main Hole

    E-Print Network [OSTI]

    Mineralogical characterization of protolith and fault rocks from the SAFOD Main Hole John G. Solum influence is not yet fully known. Faults containing these mineralogical phases are prime candidates), Mineralogical characterization of protolith and fault rocks from the SAFOD Main Hole, Geophys. Res. Lett., 33, L

  8. Modeling induction machine winding faults for diagnosis In Electrical Machines Diagnosis

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Chapter 2 Modeling induction machine winding faults for diagnosis In Electrical Machines Diagnosis of a winding fault situation, then the time available to the experimenter may vary from a few minutes to a few will see that the controls are perfectly free from imbalances induced by a stator insulation fault, whether

  9. Induction Machine Fault Detection Enhancement Using a Stator Current High Resolution Spectrum

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    into stator winding short circuit, broken rotor bar, broken end-ring, rotor eccentricity, bearing faultsInduction Machine Fault Detection Enhancement Using a Stator Current High Resolution Spectrum El-Fault detection in squirrel cage induction machines based on stator current spectrum has been widely investi gated

  10. Shallow soil CO2 flow along the San Andreas and Calaveras Faults, California

    E-Print Network [OSTI]

    Hilley, George

    Shallow soil CO2 flow along the San Andreas and Calaveras Faults, California J. L. Lewicki,1,2 W. C soil CO2 survey along the San Andreas fault (SAF) in Parkfield, and the Calaveras fault (CF) in Hollister, California, in the context of spatial and temporal variability, origin, and transport of CO2

  11. Late quaternary activity of the Laguna Salada fault in northern Baja California, Mexico

    E-Print Network [OSTI]

    Mueller, Karl

    northwest-striking dextral and oblique-slip faults. These include the Imperial, Cerro Prieto, Cucapa, Im- perial, and Cerro Prieto dextral faults. Re- straining stepovers along active dextral fault zones present in the Imperial and Mexicali Valleys include the Brawley and Cerro Pri- eto spreading centers (Fig

  12. What about vulnerability to a fault attack of the Miller algorithm during an

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    What about vulnerability to a fault attack of the Miller algorithm during an Identity Based is to analyse the weakness of the Miller algorithm when it undergoes a fault attack. We prove that the Miller algorithm is vulnerable to a fault attack which is valid in all coordinate systems, through the resolution

  13. What About Vulnerability to a Fault Attack of the Miller's Algorithm During an

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    What About Vulnerability to a Fault Attack of the Miller's Algorithm During an Identity Based of this article is to analyse the weakness of the Miller's algorithm when it undergoes a fault attack. We prove that the Miller's algorithm is vulnerable to a fault attack which is valid in all coordinate systems, through

  14. State of the art analysis of online fault location on AC cables in underground transmission systems

    E-Print Network [OSTI]

    Bak, Claus Leth

    on transmission level fault location methods have been focused on overhead lines. Because of the very different- termine the fault location. Because only one end meas- urements are used, the algorithm is derived usingState of the art analysis of online fault location on AC cables in underground transmission systems

  15. Detection and extraction of fault surfaces in 3D seismic data Israel Cohen1

    E-Print Network [OSTI]

    Cohen, Israel

    for seismic interpretation. INTRODUCTION Fault surfaces are common subterranean structures that are asso that are unrelated to faults. Furthermore, creating a consistent geological interpretation from large 3D-seismicDetection and extraction of fault surfaces in 3D seismic data Israel Cohen1 , Nicholas Coult2

  16. Coulomb and viscous friction fault detection with application to a pneumatic actuator

    E-Print Network [OSTI]

    Dunbar, William

    Coulomb and viscous friction fault detection with application to a pneumatic actuator W.B. Dunbar of friction (fault) presented in this paper could facilitate the compensation of dry friction in high precision position- ing mechanisms. Moreover, a fault detection technique for monitoring dry friction would

  17. Acoustic Emission, Cylinder Pressure and Vibration: A Multisensor Approach to Robust Fault Diagnosis \\Lambda

    E-Print Network [OSTI]

    Sharkey, Amanda

    of a diesel engine and 4 fault conditions, Artificial Neural Nets based on data from any one of these three and challenging task for Artificial Neural Nets (ANNs) is the on­line fault dia­ gnosis of a diesel engine. One way of meeting this challenge is to physically induce faults in a diesel engine, to collect data

  18. Voltage grid support of DFIG wind turbines during grid faults Anca D. Hansen1

    E-Print Network [OSTI]

    Voltage grid support of DFIG wind turbines during grid faults Anca D. Hansen1 , Gabriele Michalke2 Abstract The fault ride-through and grid support capabilities of the doubly fed induction generator (DFIG and their contribution to support the grid, i.e. to the voltage control in the power system, during grid faults

  19. Oil and Gas CDT Bots in Rocks: Intelligent Rock Deformation for Fault Rock

    E-Print Network [OSTI]

    Henderson, Gideon

    Heriot-Watt University, Institute of Petroleum Engineering Supervisory Team · Dr Helen Lewis, Heriot://www.pet.hw.ac.uk/staff-directory/jimsomerville.htm Key Words Nano/Micro sensors; faults; fault zones; geomechanics; rock mechanics; rock deformation-deformed equivalent, a different lab-deformed example and a geomechanical simulation of a fault zone showing permanent

  20. PWM Inverter-Fed Induction Motor-Based Electrical Vehicles Fault-Tolerant Control

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    and particularly on the power inverter is rapidly increasing the concern over fault tolerance due to availability faults that could afflict a power inverter. Two common types of power converter faults that were. Several power inverter architecture based on some hardware redundancy have been suggested to add