Powered by Deep Web Technologies
Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Inventing the future of reliability: FERC's recent orders and the consolidation of reliability authority  

Science Conference Proceedings (OSTI)

The Energy Policy Act of 2005 established mandatory reliability standard enforcement under a system in which the Federal Energy Regulatory Commission and the Electric Reliability Organization would have their own spheres of responsibility and authority. Recent orders, however, reflect the Commission's frustration with the reliability standard drafting process and suggest that the Electric Reliability Organization's discretion is likely to receive less deference in the future. (author)

Skees, J. Daniel

2010-06-15T23:59:59.000Z

2

Microsoft PowerPoint - NERC Reliability Standards and Mandatory...  

NLE Websites -- All DOE Office Websites (Extended Search)

NERC Reliability Standards and Standards and Mandatory Compliance Mandatory Compliance Hydro Hydro - - Power Conference Power Conference June 13, 2007 June 13, 2007 Stan Mason...

3

Managing Electricity Reliability Risk Through the Futures Markets  

E-Print Network (OSTI)

LBNL-47645 Managing Electricity Reliability Risk Through the Futures Markets Afzal S. Siddiqui Environmental Energy Technologies Division Ernest Orlando Lawrence Berkeley National Laboratory Berkeley for Operations Research and the Management Sciences INFORMS Annual Meeting in San Antonio, TX, November 2000

4

Managing electricity reliability risk through the futures markets  

SciTech Connect

In competitive electricity markets, the vertically integrated utilities that were responsible for ensuring system reliability in their own service territories, or groups of territories, often cease to exist. Typically, the burden falls to an independent system operator (ISO) to insure that enough ancillary services (AS) are available for safe, stable, and reliable operation of the grid, typically defined, in part, as compliance with officially approved engineering specifications for minimum levels of AS. In order to characterize the behavior of market participants (generators, retailers, and an ISO) in a competitive electricity market with reliability requirements, we model a spot market for electricity and futures markets for both electricity and AS. By assuming that each participant seeks to maximize its expected utility of wealth and that all markets clear, we solve for the optional quantities of electricity and AS traded in each market by all participants, as well as the corresponding market-clearing prices. We show that future prices for both electricity and AS depend on expectations of the spot price, statistical aspects of system demand, and production cost parameters. More important, our model captures the fact that electricity and AS are substitute products for the generators, implying that anticipated changes in the spot market will affect the equilibrium futures positions of both electricity and AS. We apply our model to the California electricity and AS markets to test its viability.

Siddiqui, Afzal S.

2000-10-01T23:59:59.000Z

5

FUTURE DIRECTIONS FOR THERMAL DISTRIBUTION STANDARDS  

SciTech Connect

This report details development paths for advanced versions of ASHRAE Standard 152, Method of Test for Determining the Design and Seasonal Efficiencies of Residential Thermal Distribution Efficiency. During the course of conversations within the ASHRAE committee responsible for developing the standard (SPC152P), three areas of development for Standard 152 were proposed: (1) extend the scope of the standard to include thermal comfort variables; (2) extend the scope of the standard to include small commercial buildings; and (3) improve the existing standard with respect to accuracy and economy of effort. Research needs associated with each of the three options are identified.

ANDREWS,J.W.

2003-10-31T23:59:59.000Z

6

The Past, Present, and Future of Electricity Reliability Oversight...  

NLE Websites -- All DOE Office Websites (Extended Search)

90 The Energy Policy Act of 2005 directs the Federal Energy Regulatory Commission (FERC) to certify an Electricity Reliability Organization (ERO) that will propose and enforce...

7

Dear Michael and Rae, Accelerated Transition to “Version 0 ” Reliability Standards  

E-Print Network (OSTI)

The NERC Standards Transition Management Team (STMT) and the Standards Authorization Committee (SAC) today approved the attached “Plan for Accelerating the Adoption of NERC Reliability Standards”. The STMT and SAC are encouraged by the strong support this project is receiving throughout the industry. The goal of the project is to translate the existing NERC reliability rules, comprised of operating policies, planning standards, and compliance templates, into an integrated set of reliability standards, and to be positioned in February 2005 to move forward with one set of NERC standards administered through the ANSI-accredited process. Specific objectives are to: 1. Translate the existing reliability rules — namely the existing board-approved operating policies and planning standards, the 38 compliance templates approved by the NERC board on April 2, and all approved revisions to Operating Policies 5, 6, and 9 being balloted in April 2004 — into an initial baseline (Version 0) set of reliability standards for adoption by the NERC board at its

Mr. Michael Deselle; Ms Rae Mcquade; American Electric Power; Ms Rae Mcquade

2004-01-01T23:59:59.000Z

8

NREL: Performance and Reliability R&D - Industry Workshop and Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry Workshop and Standards Support for Photovoltaic Reliability Industry Workshop and Standards Support for Photovoltaic Reliability Each year, NREL researchers, along with solar companies and other national lab researchers, participate in an industry workshop on photovoltaic (PV) reliability, conducted to encourage exchange of information about PV reliability. Proceedings of past workshops are available. The 2014 PV Module Reliability Workshop will be held in February in Golden, Colorado. Laboratory personnel actively participate in writing and discussion of reliability, safety, and test and evaluation (T&E) standards, primarily with International Electrotechnical Commission (IEC) technical committee 82, working groups 2, 3, and 7, but also with a number of other standards organizations including the American Society for Testing and Materials

9

CERTS 2012 Program Review - Reliability Standards Analysis and Assessment - Gil Tam, EPG  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

12-13, 2012 12-13, 2012 Washington, DC FY12 DOE/CERTS Transmission Reliability R&D Internal Program Review Research Projects Reliability Standards Analysis and Assessments  Frequency Response Event Collection and Analysis  NERC Interconnections 2011 Annual Grid Reliability Performance Analysis and Report Page 1 Reliability Standards Analysis and Assessment  Objective: Support the NERC committees/groups (Resource Subcommittee and RS- Frequency Working Group) in the following ways: - Perform grid reliability metrics analysis using data collected in CERTS applications as requested by the RS - Analyze collected data to assess reliability performance at different levels - Interconnection, Reliability Coordinator, Balancing Authority - Perform analysis, testing, and monitoring of current and proposed

10

ORISE: Inter-rater Reliability brings Standardization to Scientific Peer  

NLE Websites -- All DOE Office Websites (Extended Search)

Standardization of Scientific Peer Reviews Standardization of Scientific Peer Reviews IRR: A New Initiative Aims to Bring Standardization to ORISE Scientific Peer Reviews In some peer reviews, clear instructions on the basis for rating proposals may not be given to reviewers. As a result, the reviewers' final ratings can leave much room for interpretation thanks to varying degrees of reviewer knowledge and experience... all of which contribute to the final rating number. For instance, the rating scale for a particular review is 1 to 5 (with 1 being the highest). One reviewer rates the proposal a 2, and a second reviewer rates the same proposal a 4 but notes "this is the best proposal" he's ever seen. If the proposal was the best ever, why didn't he rate the proposal a 1? And, was the range in their scores due

11

Evaluating Future Standards and Codes with a Focus on High Penetration Photovoltaic (HPPV) System Deployment (Poster)  

DOE Green Energy (OSTI)

Poster displaying solutions for evaluating future standards and codes for high penetration photovoltaic (HPPV) systems.

Coddington, M.; Kroposki, B.; Basso, T.; Lynn, K.

2010-12-01T23:59:59.000Z

12

Consortium for Electric Reliability Technology Solutions Grid of the Future White Paper on  

E-Print Network (OSTI)

LBNL-45272 Consortium for Electric Reliability Technology Solutions Grid of the Future White Paper under the emerging competitive electricity market structure.1 In so doing, the white papers build upon Commission (FERC) orders 888 and 889.2 The six white papers represent the final step prior to the preparation

13

Restoring Faith in the bulk-power system: an early assessment of mandatory reliability standards  

SciTech Connect

The driving force underlying creation of mandatory reliability standards was the prevention of widespread outages, such as those that occurred in 1965, 1977 and 2003. So far, no similar outage has occurred when an entity is in full compliance with the standards, and NERC and FERC have demonstrated that they will actively enforce compliance while aggressively pursuing entities alleged to be non-compliant. (author)

McAllister, Levi; Dawson, Kelly L.

2010-03-15T23:59:59.000Z

14

Internal Compliance Program for Approved North American Electric Reliability Corporation and Regional Reliability Standards: A Guide to Compliance for Fossil Generators  

Science Conference Proceedings (OSTI)

The purpose of this report is to provide guidance to generator owner and operator members of the Electric Power Research Institute in complying with the North American Electric Reliability Corporation’s (NERC’s) mandatory reliability standards. Included here are the standards and associated requirements applicable to generator owners and operators who have registered with their regional entity, along with guidance on how successful compliance has been achieved.This report ...

2012-12-20T23:59:59.000Z

15

Microsoft PowerPoint - NERC Reliability Standards and Mandatory Compliance Presentation to Hydro-Power Conference - June 2007.p  

NLE Websites -- All DOE Office Websites (Extended Search)

NERC Reliability NERC Reliability NERC Reliability NERC Reliability Standards and Standards and Mandatory Compliance Mandatory Compliance Hydro Hydro - - Power Conference Power Conference June 13, 2007 June 13, 2007 Stan Mason Stan Mason 2 EPACT 2005 EPACT 2005 Congress approved the related legislation Congress approved the related legislation in August 2005 in August 2005 It required creation of an Electric It required creation of an Electric Reliability Organization (ERO) to be Reliability Organization (ERO) to be approved by the Federal Energy approved by the Federal Energy Regulatory Commission (FERC) Regulatory Commission (FERC) It mandated Standards that would be It mandated Standards that would be approved by FERC with financial sanctions approved by FERC with financial sanctions

16

North American Electric Reliability Corporation (NERC): Reliability...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

American Electric Reliability Corporation (NERC): Reliability Considerations from the Integration of Smart Grid. NERC develops and enforces Reliability Standards; assesses...

17

Future high precision experiments and new physics beyond Standard Model  

SciTech Connect

High precision (< 1%) electroweak experiments that have been done or are likely to be done in this decade are examined on the basis of Standard Model (SM) predictions of fourteen weak neutral current observables and fifteen W and Z properties to the one-loop level, the implications of the corresponding experimental measurements to various types of possible new physics that enter at the tree or loop level were investigated. Certain experiments appear to have special promise as probes of the new physics considered here.

Luo, Mingxing.

1993-01-01T23:59:59.000Z

18

Future high precision experiments and new physics beyond Standard Model  

SciTech Connect

High precision (< 1%) electroweak experiments that have been done or are likely to be done in this decade are examined on the basis of Standard Model (SM) predictions of fourteen weak neutral current observables and fifteen W and Z properties to the one-loop level, the implications of the corresponding experimental measurements to various types of possible new physics that enter at the tree or loop level were investigated. Certain experiments appear to have special promise as probes of the new physics considered here.

Luo, Mingxing

1993-04-01T23:59:59.000Z

19

Reliable on-chip systems in the nano-era: lessons learnt and future trends  

Science Conference Proceedings (OSTI)

Reliability concerns due to technology scaling have been a major focus of researchers and designers for several technology nodes. Therefore, many new techniques for enhancing and optimizing reliability have emerged particularly within the last five to ...

Jörg Henkel, Lars Bauer, Nikil Dutt, Puneet Gupta, Sani Nassif, Muhammad Shafique, Mehdi Tahoori, Norbert Wehn

2013-05-01T23:59:59.000Z

20

Automated Energy Distribution and Reliability System: Validation Integration - Results of Future Architecture Implementation  

SciTech Connect

This report describes Northern Indiana Public Service Co. project efforts to develop an automated energy distribution and reliability system. The purpose of this project was to implement a database-driven GIS solution that would manage all of the company's gas, electric, and landbase objects. This report is second in a series of reports detailing this effort.

Buche, D. L.

2008-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

The future of components for high reliability military and space applications  

Science Conference Proceedings (OSTI)

Military specified, ceramic packaged and radiation hardened components will disappear before the end of the century. The only long-term sustainable alternative may well be to use plastic packaged Commercial Components. The material in this report comes from the Defense Logistics Agency sponsored Plastic Package Availability Program and from an AT and T field reliability study. It summarizes Case Studies from companies which have been building and fielding highly reliable commercial and DOD military systems using plastic commercial components. Findings are, that when properly selected commercial components are operated within the true limitations of their design and packaging, they are as reliable as today`s Mil Spec components. Further, they offer cost, space and weight savings, shared manufacturing and field test experience with industry, and access to the most modern technology. Also reported are potential problems that may be encountered when using commercial components, their long term storage and use reliability characteristics, recommended design processes and supplier selection practices, commercial best business practices, and a semiconductor manufacturer`s view of the military`s switch to commercial plastic microcircuits.

Hanlon, J.T. [Sandia National Labs., Albuquerque, NM (United States). Component Information and Management Dept.

1996-02-01T23:59:59.000Z

22

Applicability of the “Gallet equation” to the vegetation clearances of NERC Reliability Standard FAC-003-2  

Science Conference Proceedings (OSTI)

NERC has proposed a standard to use to specify clearances between vegetation and power lines. The purpose of the rule is to reduce the probability of flashover to a calculably low level. This report was commissioned by FERC’s Office of Electrical Reliability. The scope of the study was analysis of the mathematics and documentation of the technical justification behind the application of the Gallet equation and the assumptions used in the technical reference paper

Kirkham, Harold

2012-03-31T23:59:59.000Z

23

A Survey of NASA and Military Standards on Fault Tolerance and Reliability Applied to Robotics  

E-Print Network (OSTI)

. There are Hand­ books (Reliability of Electronic Equipment [7], MIL­HDBK­217F, Fault Tree Handbook [25], NUREG Com­ mission as NUREG­0492, the Fault Tree Hand­ book [25]. 2.2 Parts Specifications In addition and Mission Quality, Washington, DC, April 1991. [25] NUREG­0492. Fault Tree Handbook. Technical report

Rice University - Center for Cooperative Autonomous Robots for Hazardous Environments

24

standards  

Science Conference Proceedings (OSTI)

... About Circular A-119About Us. Standards. Definition of Standards. Finding Standards. Information on Biometrics Standards.

2012-12-13T23:59:59.000Z

25

Consortium for Electric Reliability Technology Solutions Grid of the Future White Paper on Review of Recent Reliability Issues and Systems Events  

Science Conference Proceedings (OSTI)

This report is one of six reports developed under the U.S. Department of Energy (DOE) program in Power System Integration and Reliability (PSIR). The objective of this report is to review, analyze, and evaluate critical reliability issues demonstrated by recent disturbance events in the North America power system. Eleven major disturbances are examined, most occurring in this decade. The strategic challenge is that the pattern of technical need has persisted for a long period of time. For more than a decade, anticipation of market deregulation has been a major disincentive to new investments in system capacity. It has also inspired reduced maintenance of existing assets. A massive infusion of better technology is emerging as the final option to continue reliable electrical services. If an investment in better technology will not be made in a timely manner, then North America should plan its adjustments to a very different level of electrical service. It is apparent that technical operations staff among the utilities can be very effective at marshaling their forces in the immediate aftermath of a system emergency, and that serious disturbances often lead to improved mechanisms for coordinated operation. It is not at all apparent that such efforts can be sustained through voluntary reliability organizations in which utility personnel external to those organizations do most of the technical work. The eastern interconnection shows several situations in which much of the technical support has migrated from the utilities to the Independent System Operator (ISO), and the ISO staffs or shares staff with the regional reliability council. This process may be a natural and very positive consequence of utility restructuring. If so, the process should be expedited in regions where it is less advanced.

Hauer, John F.; Dagle, Jeffery E.

1999-12-01T23:59:59.000Z

26

North American Electric Reliability Corporation (NERC): Reliability  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Corporation (NERC): Reliability Corporation (NERC): Reliability Considerations from the Integration of Smart Grid North American Electric Reliability Corporation (NERC): Reliability Considerations from the Integration of Smart Grid North American Electric Reliability Corporation (NERC): Reliability Considerations from the Integration of Smart Grid. NERC develops and enforces Reliability Standards; assesses adequacy annually via a ten-year forcast and winter and summer forecasts; monitors the bulk power systems; and educates, trains, and certifies industry personnel. North American Electric Reliability Corporation (NERC): Reliability Considerations from the Integration of Smart Grid More Documents & Publications Re: DOE Request for Information - Implementing the National Broadband Plan by Studying the Communications Requirements of Electric Utilities to

27

PICMG xTCA Standards Extensions for Physics: New Developments & Future Plans  

SciTech Connect

After several years of planning and workshop meetings, a decision was reached in late 2008 to organize PICMG xTCA for Physics Technical Subcommittees to extend the ATCA and MTCA telecom standards for enhanced system performance, availability and interoperability for physics controls and applications hardware and software. Since formation in May-June 2009, the Hardware Technical Subcommittee has developed a number of ATCA, ARTM, AMC, MTCA and RTM extensions to be completed in mid-to-late 2010. The Software Technical Subcommittee is developing guidelines to promote interoperability of modules designed by industry and laboratories, in particular focusing on middleware and generic application interfaces such as Standard Process Model, Standard Device Model and Standard Hardware API. The paper describes the prototype design work completed by the lab-industry partners to date, the timeline for hardware releases to PICMG for approval, and the status of the software guidelines roadmap. The paper also briefly summarizes the program of the 4th xTCA for Physics Workshop immediately preceding the RT2010 Conference. he case for developing ATCA and MicroTCA (xTCA) specification extensions for physics has been covered in several previous papers. Briefly, ATCA and MicroTCA is the first all-serial communication platform available to the physics community to support both massively complex accelerator controls and massively large, high bandwidth and throughput experimental data acquisition systems. The major strength of xTCA is its multi-layer highly scalable managed platform architecture designed to achieve the highest possible system availability. Physics research imaging technologies have driven industrial applications in a wide range of medical scanners, for example, and in turn continue to evolve to exponentially higher speeds and resolution through new computer, communications industry and analog-to-digital conversion chip developments. The high availability managed platform is an important new tool for the instrumentation and control systems of these most complex scientific machines and instruments ever invented. Adaptation of the xTCA platforms to physics was undertaken by a collaboration starting in May-June 2009 with the PICMG open specifications industry consortium. The remainder of this paper discusses the results of lab-industry committee work as well as important concomitant prototype developments among participating laboratories and industries.

Larsen, R.S.; /SLAC

2010-08-26T23:59:59.000Z

28

Standard  

NLE Websites -- All DOE Office Websites (Extended Search)

Standard Standard rock For at least two generations, the depth of underground muon experiments has been reduced to depth in "standard rock." This is by definition the overburden of the Cayuga Rock Salt Mine near Ithaca, New York, where K. Greisen and collaborators made seminal observations of muons at substantial depths[1]. Ref. 1 says only "Most of the ground consists of shales of various types, with average density 2.65 g/cm 2 and average atomic number 11." Menon and Murthy later extended the definition: Z 2 /A = 5.5, Z/A = 0.5, and and ρ = 2.65 g/cm 2 [2]. It was thus not-quite-sodium. Lohmann[3] further assumed the mean excitation energy and density effect parameters were those of calcium carbonate, with no adjustments for the slight density difference. We use their definition for this most important material. (Extracted from D.E. Groom, N.V. Mokhov, and S.I. Striganov,

29

Power electronics reliability analysis.  

SciTech Connect

This report provides the DOE and industry with a general process for analyzing power electronics reliability. The analysis can help with understanding the main causes of failures, downtime, and cost and how to reduce them. One approach is to collect field maintenance data and use it directly to calculate reliability metrics related to each cause. Another approach is to model the functional structure of the equipment using a fault tree to derive system reliability from component reliability. Analysis of a fictitious device demonstrates the latter process. Optimization can use the resulting baseline model to decide how to improve reliability and/or lower costs. It is recommended that both electric utilities and equipment manufacturers make provisions to collect and share data in order to lay the groundwork for improving reliability into the future. Reliability analysis helps guide reliability improvements in hardware and software technology including condition monitoring and prognostics and health management.

Smith, Mark A.; Atcitty, Stanley

2009-12-01T23:59:59.000Z

30

Development of standardized air-blown coal gasifier/gas turbine concepts for future electric power systems  

Science Conference Proceedings (OSTI)

The objective of this study is to develop standardized air blown fixed bed gasification hot gas cleanup integrated gasifier combined cycle (IGCC) systems.

Sadowski, R.S.; Brown, M.J.; Hester, J.C.; Harriz, J.T.; Ritz, G.J.

1991-02-01T23:59:59.000Z

31

Electricity Reliability  

NLE Websites -- All DOE Office Websites (Extended Search)

lines and bar graph Electricity Reliability The Consortium for Electric Reliability Technology Solutions (CERTS) conducts research, develops, and disseminates new methods, tools,...

32

Reliability and maintainability program  

SciTech Connect

The program's goals are to accelerate the adoption of active solar energy systems in building applications by improving the reliability and maintainability of installed systems. The project is designed to accomplish this by providing the latest information; by assisting the industry in improving reliability and maintainability; by assisting in design, manufacture, installation and maintenance of reliable and durable systems; and by assisting in the development of codes and standards. Work and accomplishments in these areas are enumerated. (LEW)

Eden, A.

1981-05-01T23:59:59.000Z

33

Beyond Renewable Portfolio Standards: An Assessment of Regional Supply and Demand Conditions Affecting the Future of Renewable Energy in the West; Report and Executive Summary  

SciTech Connect

This study assesses the outlook for utility-scale renewable energy development in the West once states have met their renewable portfolio standard (RPS) requirements. In the West, the last state RPS culminates in 2025, so the analysis uses 2025 as a transition point on the timeline of RE development. Most western states appear to be on track to meet their final requirements, relying primarily on renewable resources located relatively close to the customers being served. What happens next depends on several factors including trends in the supply and price of natural gas, greenhouse gas and other environmental regulations, consumer preferences, technological breakthroughs, and future public policies and regulations. Changes in any one of these factors could make future renewable energy options more or less attractive.

Hurlbut, D. J.; McLaren, J.; Gelman, R.

2013-08-01T23:59:59.000Z

34

Photovoltaic system reliability  

SciTech Connect

This paper discusses the reliability of several photovoltaic projects including SMUD`s PV Pioneer project, various projects monitored by Ascension Technology, and the Colorado Parks project. System times-to-failure range from 1 to 16 years, and maintenance costs range from 1 to 16 cents per kilowatt-hour. Factors contributing to the reliability of these systems are discussed, and practices are recommended that can be applied to future projects. This paper also discusses the methodology used to collect and analyze PV system reliability data.

Maish, A.B.; Atcitty, C. [Sandia National Labs., NM (United States); Greenberg, D. [Ascension Technology, Inc., Lincoln Center, MA (United States)] [and others

1997-10-01T23:59:59.000Z

35

The Future of Nuclear Energy: Facts and Fiction Chapter III: How (un)reliable are the Red Book Uranium Resource Data?  

E-Print Network (OSTI)

For more than 40 years, the Nuclear Energy Agency of the OECD countries and the International Atomic Energy Administration of the United Nations have published a biannual document with the title “Uranium Resources, Production and Demand”. This book, known as the “Red Book”, summarizes data about the actual and near future nuclear energy situation and presents the accumulated worldwide knowledge about the existing and expected uranium resources. These data are widely believed to provide an accurate and solid basis for future decisions about nuclear energy. Unfortunately, as it is demonstrated in this paper, they do not. The conventional worldwide uranium resources are estimated by the authors of the Red Book as 5.5 million tons. Out of these, 3.3 million tons are assigned to the reasonable assured category and 2.2 million tons are associated with the not yet discovered but assumed to exist inferred resources. Our analysis shows that neither the 3.3 million tons of “assured ” resources nor the 2.2 million tons of inferred resources are justified by the Red Book data and that the actual known exploitable resources are probably much smaller. Despite many shortcomings of the uranium resource data, some interesting and valuable information can be extracted from the Red Book. Perhaps most importantly, the Red Book resource data can be used to test the “economic-geological hypothesis”, which claims for example that a doubling of uranium price will increase the amount exploitable uranium resources by an even larger factor. The relations between the uranium resources claimed for the different resource categories and their associated cost estimates are found to be in clear contradiction with this hypothesis.

Michael Dittmar

2009-01-01T23:59:59.000Z

36

Electricity Reliability  

E-Print Network (OSTI)

and reliability of the energy infrastructure, and facilitating recovery from disruptions to energy supply. MajorElectricity Delivery and Energy Reliability High Temperature Superconductivity (HTS) Visualization on the nation's energy delivery system Superconductors are important to meeting the nation's energy needs

37

Hawaii electric system reliability.  

SciTech Connect

This report addresses Hawaii electric system reliability issues; greater emphasis is placed on short-term reliability but resource adequacy is reviewed in reference to electric consumers' views of reliability "worth" and the reserve capacity required to deliver that value. The report begins with a description of the Hawaii electric system to the extent permitted by publicly available data. Electrical engineering literature in the area of electric reliability is researched and briefly reviewed. North American Electric Reliability Corporation standards and measures for generation and transmission are reviewed and identified as to their appropriateness for various portions of the electric grid and for application in Hawaii. Analysis of frequency data supplied by the State of Hawaii Public Utilities Commission is presented together with comparison and contrast of performance of each of the systems for two years, 2010 and 2011. Literature tracing the development of reliability economics is reviewed and referenced. A method is explained for integrating system cost with outage cost to determine the optimal resource adequacy given customers' views of the value contributed by reliable electric supply. The report concludes with findings and recommendations for reliability in the State of Hawaii.

Silva Monroy, Cesar Augusto; Loose, Verne William

2012-09-01T23:59:59.000Z

38

Office of Electricity Delivery And Energy Reliability To Hold...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

And Energy Reliability To Hold Technical Conference On The Design Of Future Electric Transmission Office of Electricity Delivery And Energy Reliability To Hold Technical...

39

Beyond Renewable Portfolio Standards: An Assessment of Regional Supply and Demand Conditions Affecting the Future of Renewable Energy in the West; Executive Summary  

NLE Websites -- All DOE Office Websites (Extended Search)

National Renewable Energy Laboratory 15013 Denver West Parkway Golden, CO 80401 303-275-3000 * www.nrel.gov Beyond Renewable Portfolio Standards: An Assessment of Regional Supply and Demand Conditions Affecting the Future of Renewable Energy in the West Executive Summary David J. Hurlbut, Joyce McLaren, and Rachel Gelman National Renewable Energy Laboratory Prepared under Task No. AROE.2000 NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency & Renewable Energy Operated by the Alliance for Sustainable Energy, LLC This report is available at no cost from the National Renewable Energy Laboratory (NREL) at www.nrel.gov/publications. Technical Report NREL/TP-6A20-57830 August 2013 Contract No. DE-AC36-08GO28308

40

Beyond Renewable Portfolio Standards: An Assessment of Regional Supply and Demand Conditions Affecting the Future of Renewable Energy in the West  

NLE Websites -- All DOE Office Websites (Extended Search)

(This page intentionally left blank) (This page intentionally left blank) National Renewable Energy Laboratory 15013 Denver West Parkway Golden, CO 80401 303-275-3000 * www.nrel.gov Beyond Renewable Portfolio Standards: An Assessment of Regional Supply and Demand Conditions Affecting the Future of Renewable Energy in the West David J. Hurlbut, Joyce McLaren, and Rachel Gelman National Renewable Energy Laboratory Prepared under Task No. AROE.2000 NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency & Renewable Energy Operated by the Alliance for Sustainable Energy, LLC This report is available at no cost from the National Renewable Energy Laboratory (NREL) at www.nrel.gov/publications. Technical Report NREL/TP-6A20-57830 August 2013 Contract No. DE-AC36-08GO28308

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Real Time Grid Reliability Management 2005  

E-Print Network (OSTI)

transmission planning to evaluate future needs under different assumptions for resource availability,transmission operators depend on to ensure system reliability. The assumption of availabilitytransmission operators depend on to ensure system reliability. The assumption of traditional governor availability

Eto, Joe

2008-01-01T23:59:59.000Z

42

North American Electric Reliability Corporation  

E-Print Network (OSTI)

Compliance filing regarding consistency of Western Electricity Coordinating Council (WECC) regional reliability Standard WECC-TOP-STD-007-0 with NERC reliability standard Dear Ms. Michael: On July 9, 2007, the North American Electric Reliability Corporation (NERC) filed an explanation regarding the consistency of WECC’s regional reliability standard WECC-TOP-STD-007-0 with respect to NERC Reliability Standard IRO-005-1. Notice of this filing was issued on July 12, 2007 with comments, protests or motions to intervene due on or before August 8, 2007. Notices of intervention and unopposed timely filed motions to intervene are granted pursuant to the operation of Rule 214 of the Commission’s Rules of Practice and Procedure (18 C.F.R. § 385.214). Any opposed or untimely filed motion to intervene is governed by the provisions of Rule 214. No protests or adverse comments were filed.

Docket No. Rr

2007-01-01T23:59:59.000Z

43

Sustainability Standards Portal  

Science Conference Proceedings (OSTI)

... links to the original standard/ directive developer website ... for harmonizing standards and directives (future work ... for information only; it does not imply ...

44

Meeting future exhaust emissions standards using natural gas as a vehicle fuel: Lessons learned from the natural gas vehicle challenge '92  

DOE Green Energy (OSTI)

The Natural Gas Vehicle Challenge '92, organized by Argonne National Laboratory and sponsored by the US Department of Energy, the Energy, Mines, and Resources - Canada, the Society of Automotive Engineers, and many others, resulted in 20 varied approaches to the conversion of a gasoline-fueled, spark-ignited, internal combustion engine to dedicated natural gas use. Starting with a GMC Sierra 2500 pickup truck, donated by General Motors, teams of college and university student engineers strived to optimize Chevrolet V-8 engines operating on natural gas for improved emissions, fuel economy, performance, and advanced design features. This paper focuses on the results of the emission event, and compares engine mechanical configurations, engine management systems, catalyst configurations and locations, and approaches to fuel control and the relationship of these parameters to engine-out and tailpipe emissions of regulated exhaust constituents. Nine of the student-modified trucks passed the current levels of exhaust emission standards, and some exceeded the strictest future emissions standards envisioned by the US Environmental Protection Agency. Factors in achieving good emissions control using natural gas are summarized, and observations concerning necessary components of a successful emissions control strategy are presented.

Rimkus, W.A.; Larsen, R.P.

1992-01-01T23:59:59.000Z

45

Meeting future exhaust emissions standards using natural gas as a vehicle fuel: Lessons learned from the natural gas vehicle challenge `92  

DOE Green Energy (OSTI)

The Natural Gas Vehicle Challenge `92, organized by Argonne National Laboratory and sponsored by the US Department of Energy, the Energy, Mines, and Resources - Canada, the Society of Automotive Engineers, and many others, resulted in 20 varied approaches to the conversion of a gasoline-fueled, spark-ignited, internal combustion engine to dedicated natural gas use. Starting with a GMC Sierra 2500 pickup truck, donated by General Motors, teams of college and university student engineers strived to optimize Chevrolet V-8 engines operating on natural gas for improved emissions, fuel economy, performance, and advanced design features. This paper focuses on the results of the emission event, and compares engine mechanical configurations, engine management systems, catalyst configurations and locations, and approaches to fuel control and the relationship of these parameters to engine-out and tailpipe emissions of regulated exhaust constituents. Nine of the student-modified trucks passed the current levels of exhaust emission standards, and some exceeded the strictest future emissions standards envisioned by the US Environmental Protection Agency. Factors in achieving good emissions control using natural gas are summarized, and observations concerning necessary components of a successful emissions control strategy are presented.

Rimkus, W.A.; Larsen, R.P.

1992-09-01T23:59:59.000Z

46

Definition: Regional Reliability Plan | Open Energy Information  

Open Energy Info (EERE)

reliability Coordinator References Glossary of Terms Used in Reliability Standards An i LikeLike UnlikeLike You like this.Sign Up to see what your friends like. nline...

47

Follow-on to a report on the Applicability of the “Gallet equation” to the vegetation clearances of NERC Reliability Standard FAC-003-2  

SciTech Connect

In earlier work, a study done at the Pacific Northwest National Laboratory examined a NERC proposed standard specifying clearances between vegetation and power lines. The method proposed for calculating the clearances was based on the results of testing for high-voltage line designs. An equation developed to relate the results of testing with rod-plane gaps to proposed tower window sizes was incorporated into the calculations. The equation in question, sometimes called the “Gallet equation,” describes the insulation performance of the atmosphere for air gaps of a few meters. The equation was described in the PNNL study as a good and simple-to-use way to solve a problem made difficult by the nonlinear interactions of the variables. For calculations based on this equation, a certain set of assumptions must be made. In particular, a value for a quantity called the “gap factor” is needed. This is the amount by which the gap to be modeled by the equation is stronger than the reference gap that was used in developing the Gallet equation. That reference gap is the gap between a rod and a plane. This follow-on report examines the effect on flashover probabilities of assuming an incorrect value for the gap factor. In particular, the flashover probability is found that would result from using a value of 1.3 when a gap factor of 1.0 should be applied. It is shown that with these assumptions the probability of a flashover changes from being extremely unlikely (about 1 in 1000 chance) to a virtual certainty (about 97% chance).

Kirkham, Harold

2012-08-31T23:59:59.000Z

48

Thick Buildings [Standards  

E-Print Network (OSTI)

STANDARDS The idea of tracts of windowless indoor space hassider U.S. practices and standards? building with four sidesAs these codes and standards change future generations may

Coffin, Christie Johnson

1995-01-01T23:59:59.000Z

49

Achieving Energy Reliability TOGETHER. Achieving Energy Reliability...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Achieving Energy Reliability TOGETHER. Achieving Energy Reliability TOGETHER. 2010 STRATEGIC PLAN June 2010 TABLE OF CONTENTS OE's Declaration . . . . . . . . . . . . . . . . . . ....

50

Grid reliability management tools  

SciTech Connect

To summarize, Consortium for Electric Reliability Technology Solutions (CERTS) is engaged in a multi-year program of public interest R&D to develop and prototype software tools that will enhance system reliability during the transition to competitive markets. The core philosophy embedded in the design of these tools is the recognition that in the future reliability will be provided through market operations, not the decisions of central planners. Embracing this philosophy calls for tools that: (1) Recognize that the game has moved from modeling machine and engineering analysis to simulating markets to understand the impacts on reliability (and vice versa); (2) Provide real-time data and support information transparency toward enhancing the ability of operators and market participants to quickly grasp, analyze, and act effectively on information; (3) Allow operators, in particular, to measure, monitor, assess, and predict both system performance as well as the performance of market participants; and (4) Allow rapid incorporation of the latest sensing, data communication, computing, visualization, and algorithmic techniques and technologies.

Eto, J.; Martinez, C.; Dyer, J.; Budhraja, V.

2000-10-01T23:59:59.000Z

51

Utility-scale grid-tied PV inverter reliability workshop summary report.  

DOE Green Energy (OSTI)

A key to the long-term success of the photovoltaic (PV) industry is confidence in the reliability of PV systems. Inverters are the most commonly noted cause of PV system incidents triggered in the field. While not all of these incidents are reliability-related or even necessarily failures, they still result in a loss of generated power. With support from the U.S. Department of Energy's Solar Energy Technologies Program, Sandia National Laboratories organized a Utility-Scale Grid-Tied Inverter Reliability Workshop in Albuquerque, New Mexico, January 27-28, 2011. The workshop addressed the reliability of large (100-kilowatt+) grid-tied inverters and the implications when such inverters fail, evaluated inverter codes and standards, and provided discussion about opportunities to enhance inverter reliability. This report summarizes discussions and presentations from the workshop and identifies opportunities for future efforts.

Granata, Jennifer E.; Quintana, Michael A.; Tasca, Coryne Adelle (SRA International, Inc., Fairfax, VA); Atcitty, Stanley

2011-07-01T23:59:59.000Z

52

Utility-scale grid-tied PV inverter reliability workshop summary report.  

SciTech Connect

A key to the long-term success of the photovoltaic (PV) industry is confidence in the reliability of PV systems. Inverters are the most commonly noted cause of PV system incidents triggered in the field. While not all of these incidents are reliability-related or even necessarily failures, they still result in a loss of generated power. With support from the U.S. Department of Energy's Solar Energy Technologies Program, Sandia National Laboratories organized a Utility-Scale Grid-Tied Inverter Reliability Workshop in Albuquerque, New Mexico, January 27-28, 2011. The workshop addressed the reliability of large (100-kilowatt+) grid-tied inverters and the implications when such inverters fail, evaluated inverter codes and standards, and provided discussion about opportunities to enhance inverter reliability. This report summarizes discussions and presentations from the workshop and identifies opportunities for future efforts.

Granata, Jennifer E.; Quintana, Michael A.; Tasca, Coryne Adelle (SRA International, Inc., Fairfax, VA); Atcitty, Stanley

2011-07-01T23:59:59.000Z

53

Synchrophasor Standards  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Development & Support Development & Support Kenneth Martin martin@electricpowergroup.com June 27-28, 2013 Washington, DC DOE/OE Transmission Reliability Program 2 Introduction  Synchrophasor measurement systems widely deployed  Enable a new generation of power system monitor & control capability - Improved power system analysis & system models - Wide area, high-resolution visibility - Basis for a new generation of controls  Research challenge - standards to enable interoperability - Measurement performance - Communications  Research focus - facilitate development, testing, and validation of standards to promote interoperability Basic phasor concept well known . A phasor is the complex form of the AC waveform √2 A cos (2 π ω 0 t + φ) A e

54

Mathematical Reliability Theory: From The Beginning to . . .  

E-Print Network (OSTI)

It is argued that the mathematical theory of reliability as a separate discipline began in 1961 with the publication of Multi-component systems and their structures and their reliability by Birnbaum, Esary and Saunders. Prior to this time, mathematicians were just applying standard mathematical techniques such as queueing theory, statistics and probability to engineering reliability problems. We

Richard E. Barlow

2002-01-01T23:59:59.000Z

55

Development of standardized air-blown coal gasifier/gas turbine concepts for future electric power systems. Volume 1, Final report  

Science Conference Proceedings (OSTI)

The objective of this study is to develop standardized air blown fixed bed gasification hot gas cleanup integrated gasifier combined cycle (IGCC) systems.

Sadowski, R.S.; Brown, M.J.; Hester, J.C.; Harriz, J.T.; Ritz, G.J.

1991-02-01T23:59:59.000Z

56

NREL: Gearbox Reliability Collaborative - Gearbox Reliability Collaborative  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications Publications Screenshot of the cover of an NREL report, titled Gearbox Reliability Collaborative Project Report: Findings from Phase 1 and Phase 2 testing. The NREL wind research program's Gearbox Reliability Collaborative publishes reports and presentations of its activities. General Gearbox Reliability Collaborative Phase 3 Gearbox 2 Test Plan 2013 DOE/NREL Gearbox Reliability Collaborative: All Members Meeting Agenda 2012 Gearbox Reliability Collaborative Phase 1 and 2: Testing and Modeling Results 2012 Gearbox Reliability Collaborative Update: A Brief (Presentation) Jan 2012 Gearbox Reliability Collaborative Update (Presentation) April 2012 NREL Collaborates to Improve Wind Turbine Technology (Fact Sheet) 2012 Gearbox Reliability Collaborative - Phase 1 and 2 Overview

57

Achieving Energy Reliability TOGETHER. Achieving Energy Reliability...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Achieving Energy Reliability TOGETHER. Achieving Energy Reliability TOGETHER. 2010 STRATEGIC PLAN June 2010 This plan reflects OE's ongoing development of a strategy to achieve the...

58

Ris-R-1235(EN) Reliability Databases  

E-Print Network (OSTI)

.4 Standard models of reliability MIL-HDBK-217 MIL-HDBK-217 was the original standard for reliability-wide. The most recent revision of MIL-HDBK- 217 is Revision F Notice 2, which was released in February of 1995. MIL-HDBK-217 includes the ability to perform a 'parts count' analysis or a 'part stress' analysis

59

Appliances and Commercial Equipment Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

energy and water savings for urinals during any future standard rulemaking. The Standards and Test Procedures for this product are related to Rulemaking for Plumbing Products...

60

Photovoltaic performance and reliability workshop  

DOE Green Energy (OSTI)

This workshop was the sixth in a series of workshops sponsored by NREL/DOE under the general subject of photovoltaic testing and reliability during the period 1986--1993. PV performance and PV reliability are at least as important as PV cost, if not more. In the US, PV manufacturers, DOE laboratories, electric utilities, and others are engaged in the photovoltaic reliability research and testing. This group of researchers and others interested in the field were brought together to exchange the technical knowledge and field experience as related to current information in this evolving field of PV reliability. The papers presented here reflect this effort since the last workshop held in September, 1992. The topics covered include: cell and module characterization, module and system testing, durability and reliability, system field experience, and standards and codes.

Mrig, L. [ed.

1993-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Electricity Delivery and Energy Reliability  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The Office of Electricity Delivery and Energy Reliability (OE) drives electric grid modernization and resiliency in the energy infrastructure while working to enable innovation across the energy sector, empowering American consumers, and securing our energy future. The OE mission and the leadership role OE plays in the energy industry directly support the President's effort to accelerate the transformation of America's energy system

62

Electric Reliability & Hurricane Preparedness Plan  

E-Print Network (OSTI)

plant that will improve reliability and stabilize fuel costs · Help meet future load growth and reserve;Mississippi Power Company · Headquartered - Gulfport · Subsidiary of Southern Company · Serves 23 counties Southeast Mississippi · 192,000 retail customers · Generating capacity: 3,166,192 kW · Plant Radcliffe

63

Electronic reliability estimation: how reliable are the results?  

Science Conference Proceedings (OSTI)

The development of Safety Critical Systems requires the compliance to several safety standards and regulations. Since, most of the times, human life is at stake, it is crucial to fully understand the behaviour of the system being developed in order to ... Keywords: MIL-Hdbk-217F, MTTF, estimation, reliability

Nuno Silva; Rui Lopes

2012-09-01T23:59:59.000Z

64

Office of Electricity Delivery And Energy Reliability To Hold...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of Electricity Delivery And Energy Reliability To Hold Technical Conference On The Design Of Future Electric Transmission Office of Electricity Delivery And Energy...

65

Vehicle trends and future gasoline needs  

Science Conference Proceedings (OSTI)

The passenger car continues to change at a rapid pace, responding both to customers' preferences and to regulations. Vehicle trends place demands on the powertrain for high specific output, efficiency and reliability. Engine design and calibration must be optimized to utilize available fuel octane fully since low speed knock remains a significant constraint. Emerging capabilities for engine control provide flexible, adaptive approaches for fuel/engine matching. Recent, substantial increases in fuel volatility raise concerns for both driveability and emissions. Expanded use of fuel injection will be helpful for future vehicles, but new problems have appeared, and tighter definition of gasoline properties will be needed. The high sensitivity of fuel systems and emission controls to fuel quality is demonstrated by injector deposits and plugged catalysts. Dependable gasoline quality is essential. High standards of quality and reliability are necessary for fuel and lubricant products. The precision offered by current emission control systems can only be achieved with fuels that are properly prepared and marketed.

Baker, R.E.; Chui, G.K.

1986-06-01T23:59:59.000Z

66

Electricity & Energy Reliability  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ENERGY RELIABILITY Human Capital Management Strategic Plan FY2007 Office of Electricity Delivery and Energy Reliability Human Capital Management Strategic Plan September 2006...

67

Substation reliability -- Practical application and system approach  

SciTech Connect

Practical application of reliability analysis was made for the comparison of alternate line and bus arrangements of a future transmission substation with potential savings of up to $3.6 M. The paper describes how both the substation and the power system were simulated by using computer programs STAREL and COMREL. It presents the method used to obtain the most accurate estimates for the outage data of the system components. Finally, it expresses the results with simple reliability indices which can be meaningful for management. The results of the study show the need to include the reliability of the transmission system in a substation reliability evaluation.

Save, P. [Southern California Edison Co., Rosemead, CA (United States)

1995-02-01T23:59:59.000Z

68

Definition: Regional Reliability Organization | Open Energy Informatio...  

Open Energy Info (EERE)

Terms Bulk Electric System References Glossary of Terms Used in Reliability Standards An LikeLike UnlikeLike You like this.Sign Up to see what your friends like. inline...

69

Definition: Adverse Reliability Impact | Open Energy Information  

Open Energy Info (EERE)

a widespread area of the Interconnection.1 Related Terms smart grid References Glossary of Terms Used in Reliability Standards An LikeLike UnlikeLike You like this.Sign Up...

70

Definition: Interconnection Reliability Operating Limit | Open...  

Open Energy Info (EERE)

Terms System Operating Limit, System, Cascading Outage, smart grid References Glossary of Terms Used in Reliability Standards An inl LikeLike UnlikeLike You like this.Sign...

71

Definition: Reliability Coordinator Information System | Open Energy  

Open Energy Info (EERE)

Reliability Coordinator Information System Reliability Coordinator Information System Jump to: navigation, search Dictionary.png Reliability Coordinator Information System The system that Reliability Coordinators use to post messages and share operating information in real time.[1] Related Terms Reliability Coordinator References ↑ Glossary of Terms Used in Reliability Standards An LikeLike UnlikeLike You like this.Sign Up to see what your friends like. inline Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Reliability_Coordinator_Information_System&oldid=480407" Categories: Definitions ISGAN Definitions What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load)

72

Photovoltaic performance and reliability workshop  

DOE Green Energy (OSTI)

This proceedings is the compilation of papers presented at the ninth PV Performance and Reliability Workshop held at the Sheraton Denver West Hotel on September 4--6, 1996. This years workshop included presentations from 25 speakers and had over 100 attendees. All of the presentations that were given are included in this proceedings. Topics of the papers included: defining service lifetime and developing models for PV module lifetime; examining and determining failure and degradation mechanisms in PV modules; combining IEEE/IEC/UL testing procedures; AC module performance and reliability testing; inverter reliability/qualification testing; standardization of utility interconnect requirements for PV systems; need activities to separate variables by testing individual components of PV systems (e.g. cells, modules, batteries, inverters,charge controllers) for individual reliability and then test them in actual system configurations; more results reported from field experience on modules, inverters, batteries, and charge controllers from field deployed PV systems; and system certification and standardized testing for stand-alone and grid-tied systems.

Kroposki, B.

1996-10-01T23:59:59.000Z

73

Robustness and Reliability of Grid Systems Under Volatile ...  

Science Conference Proceedings (OSTI)

... impact reliability and robustness in large-scale, standards-based grid computing systems. These methods measure the ability of grids to provide ...

74

An ATM Adaptation Layer for Reliable Transfers  

Science Conference Proceedings (OSTI)

There has been much attention given to ATM Adaptation Layers (AAL) over the ten-year history of ATM standardization. Yet none of the existing standards include a retransmission protocol to ensure reliability of the transfers. In this paper we propose ...

Gunnar Karlsson

1996-09-01T23:59:59.000Z

75

Auto reliability project  

Science Conference Proceedings (OSTI)

Reliability is defined as the probability that an item (system, subsystem, or component) performs according to specifications. When test data are sparse (such as with a new concept design), expert judgment can be used to estimate reliability. Using expert ...

Jane M. Booker; Thomas R. Bement

2002-01-01T23:59:59.000Z

76

NREL: Gearbox Reliability Collaborative - Gearbox Reliability Collaborative  

NLE Websites -- All DOE Office Websites (Extended Search)

All Members Meeting All Members Meeting The Gearbox Reliability Collaborative (GRC) All Members Meeting was held on February 4-5, 2013. The meeting covered advancements made across the NREL GRC project and the latest industry updates on gearbox reliability and operations and maintenance practices. The presentations covered gearbox design updates, gearbox testing updates, experimental data analysis, and operations and maintenance research. Presentations Monday, February 4 Time Presenter Organization Presentation 8:30 a.m. Paul Veers NREL Welcome 8:45 a.m. Mike Derby DOE Overview 9:05 a.m. Jon Keller NREL Gearbox Reliability Collaborative Status and Plans 9:20 a.m. Hal Link NREL New Gearbox #2 Test Plan 9:40 a.m. Hal Link NREL NWTC Dynos and Grid Simulator 10:00 a.m. Jon Keller/Brian McNiff NREL/MLI Gearbox Reliability Collaborative, Phase 3: High Speed Shaft Bearing Loads

77

Increasing the Reliability of Reliability Diagrams  

Science Conference Proceedings (OSTI)

The reliability diagram is a common diagnostic graph used to summarize and evaluate probabilistic forecasts. Its strengths lie in the ease with which it is produced and the transparency of its definition. While visually appealing, major long-...

Jochen Bröcker; Leonard A. Smith

2007-06-01T23:59:59.000Z

78

Managing Reliability in the 21st Century  

SciTech Connect

The rapid pace of change at Ike end of the 20th Century should continue unabated well into the 21st Century. The driver will be the marketplace imperative of "faster, better, cheaper." This imperative has already stimulated a revolution-in-engineering in design and manufacturing. In contrast, to date, reliability engineering has not undergone a similar level of change. It is critical that we implement a corresponding revolution-in-reliability-engineering as we enter the new millennium. If we are still using 20th Century reliability approaches in the 21st Century, then reliability issues will be the limiting factor in faster, better, and cheaper. At the heart of this reliability revolution will be a science-based approach to reliability engineering. Science-based reliability will enable building-in reliability, application-specific products, virtual qualification, and predictive maintenance. The purpose of this paper is to stimulate a dialogue on the future of reliability engineering. We will try to gaze into the crystal ball and predict some key issues that will drive reliability programs in the new millennium. In the 21st Century, we will demand more of our reliability programs. We will need the ability to make accurate reliability predictions that will enable optimizing cost, performance and time-to-market to meet the needs of every market segment. We will require that all of these new capabilities be in place prior to the stint of a product development cycle. The management of reliability programs will be driven by quantifiable metrics of value added to the organization business objectives.

Dellin, T.A.

1998-11-23T23:59:59.000Z

79

Architectural design for reliability  

DOE Green Energy (OSTI)

Design-for-reliability concepts can be applied to the products of the construction industry, which includes buildings, bridges, transportation systems, dams, and other structures. The application of a systems approach to designing in reliability emphasizes the importance of incorporating uncertainty in the analyses, the benefits of optimization analyses, and the importance of integrating reliability, safety, and security. 4 refs., 3 figs.

Cranwell, R.M.; Hunter, R.L.

1997-08-01T23:59:59.000Z

80

Hydrogen & Our Energy Future  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydrogen Program Hydrogen Program www.hydrogen.energy.gov Hydrogen & Our Energy Future  | HydrOgEn & Our EnErgy FuturE U.S. Department of Energy Hydrogen Program www.hydrogen.energy.gov u.S. department of Energy |  www.hydrogen.energy.gov Hydrogen & Our Energy Future Contents Introduction ................................................... p.1 Hydrogen - An Overview ................................... p.3 Production ..................................................... p.5 Delivery ....................................................... p.15 Storage ........................................................ p.19 Application and Use ........................................ p.25 Safety, Codes and Standards ............................... p.33

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Gearbox Reliability Collaborative (GRC) Description and Loading  

SciTech Connect

This document describes simulated turbine load cases in accordance to the IEC 61400-1 Ed.3 standard, which is representative of the typical wind turbine design process. The information presented herein is intended to provide a broad understanding of the gearbox reliability collaborative 750kW drivetrain and turbine configuration. In addition, fatigue and ultimate strength drivetrain loads resulting from simulations are presented. This information provides the bases for the analytical work of the gearbox reliability collaborative effort.

Oyague, F.

2011-11-01T23:59:59.000Z

82

Reliability and Markets Program Information  

Energy.gov (U.S. Department of Energy (DOE))

Summary of the Tranmission Reliability program's Reliability and Markets activity area. The program helps to increase grid reliability and reduce costs for customers using integrated market and...

83

Definition: Reliability Coordinator Area | Open Energy Information  

Open Energy Info (EERE)

Coordinator Area Coordinator Area Jump to: navigation, search Dictionary.png Reliability Coordinator Area The collection of generation, transmission, and loads within the boundaries of the Reliability Coordinator. Its boundary coincides with one or more Balancing Authority Areas.[1] Related Terms transmission lines, Reliability Coordinator, Balancing Authority Area, transmission line, balancing authority, smart grid References ↑ Glossary of Terms Used in Reliability Standards An inlin LikeLike UnlikeLike You like this.Sign Up to see what your friends like. e Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Reliability_Coordinator_Area&oldid=502626" Categories: Definitions ISGAN Definitions What links here Related changes Special pages

84

Human Reliability Program (HRP)  

Energy.gov (U.S. Department of Energy (DOE))

Office of SecurityHRP Training Certification- HTML- Flash10 CFR 712, Human Reliability ProgramHRP HandbookTools for Clinicians- Medication List- Medical Records Checklist

85

Materials Reliability Employment Opportunities  

Science Conference Proceedings (OSTI)

... from an in-house microfabrication facility that has ... well as access to other world-class NIST facilities. ... of membrane reliability is essential for ensuring ...

2012-10-15T23:59:59.000Z

86

Electricity Delivery and Energy Reliability PROGRAM DESCRIPTION  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 2 Electricity Delivery and Energy Reliability PROGRAM DESCRIPTION The Office of Electricity Delivery and Energy Reliability (OE) leads national efforts to modernize the electric grid, enhance security and reliability of energy infrastructure, and facilitate recovery from disruptions to the energy supply. As stated in the President's A Policy Framework for the 21 st Century Grid, a smarter, modernized electric grid is fundamental to transforming the Nation's energy system and securing US leadership in a clean energy future. OE supports activities that enable innovation across the energy sector, empower American consumers, and secure our energy future. OE consists of three programs: Research and Development; Permitting, Siting and Analysis; and Infrastructure Security and Energy Restoration.

87

Automate feeders to improve reliability  

SciTech Connect

Pacific Gas and Electric Co. (PG and E) improved system reliability and saved money with an alarm and control system for substation distribution switches using remote control by standard telephone-communication links. The method is especially well suited for urban and suburban areas with independent telephone and power systems. The automated systems can also add capability to areas now limited by the emergency capability. The primary distribution alarm and control system has both a substation and a field switch element. Photographs accompanying the description help to explain how the controls work. 7 figures. (DCK)

1981-01-01T23:59:59.000Z

88

General Aviation Aircraft Reliability Study  

Science Conference Proceedings (OSTI)

This reliability study estimates Complex General Aviation (GA) Aircraft System reliability. As part of an effort to successfully improve the safety and reliability of the next generation of GA aircraft, a benchmarking of the current reliability of GA ...

Pettit Duane; Turnbull Andrew

2001-02-01T23:59:59.000Z

89

Office of Electricity Delivery And Energy Reliability To Hold Technical  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of Electricity Delivery And Energy Reliability To Hold Office of Electricity Delivery And Energy Reliability To Hold Technical Conference On The Design Of Future Electric Transmission Office of Electricity Delivery And Energy Reliability To Hold Technical Conference On The Design Of Future Electric Transmission February 5, 2009 - 10:57am Addthis On March 4, 2009, the Department of Energy's Office of Electricity Delivery and Energy Reliability (OE) will conduct a technical conference in the Washington, DC area to discuss the design of future electric transmission. The technical conference will discuss the likely demand for future electric transmission and whether the development of conceptual alternative extra high voltage (EHV) systems would assist generation developers, State energy policy officials, utility planners, and other

90

Measurement Practices for Reliability and Power Quality  

DOE Green Energy (OSTI)

This report provides a distribution reliability measurement ''toolkit'' that is intended to be an asset to regulators, utilities and power users. The metrics and standards discussed range from simple reliability, to power quality, to the new blend of reliability and power quality analysis that is now developing. This report was sponsored by the Office of Electric Transmission and Distribution, U.S. Department of Energy (DOE). Inconsistencies presently exist in commonly agreed-upon practices for measuring the reliability of the distribution systems. However, efforts are being made by a number of organizations to develop solutions. In addition, there is growing interest in methods or standards for measuring power quality, and in defining power quality levels that are acceptable to various industries or user groups. The problems and solutions vary widely among geographic areas and among large investor-owned utilities, rural cooperatives, and municipal utilities; but there is still a great degree of commonality. Industry organizations such as the National Rural Electric Cooperative Association (NRECA), the Electric Power Research Institute (EPRI), the American Public Power Association (APPA), and the Institute of Electrical and Electronics Engineers (IEEE) have made tremendous strides in preparing self-assessment templates, optimization guides, diagnostic techniques, and better definitions of reliability and power quality measures. In addition, public utility commissions have developed codes and methods for assessing performance that consider local needs. There is considerable overlap among these various organizations, and we see real opportunity and value in sharing these methods, guides, and standards in this report. This report provides a ''toolkit'' containing synopses of noteworthy reliability measurement practices. The toolkit has been developed to address the interests of three groups: electric power users, utilities, and regulators. The report will also serve to support activities to develop and share information among industry and regulatory participants about critical resources and practices. The toolkit has been developed by investigating the status of indices and definitions, surveying utility organizations on information sharing, and preparing summaries of reliability standards and monitoring requirements--the issues, needs, work under way, existing standards, practices and guidelines--for the following three classifications: (1) terms and definitions of reliability; (2) power quality standards, guidelines, and measurements; and (3) activities and organizations developing and sharing information on distribution reliability. As these synopses of reliability measurement practices are provided, it must be noted that an economic penalty may be associated with requiring too high a reliability level from the distribution system for all customers. It may be appropriate for the distribution system to supply only some base, generally accepted level of reliability. This base level would be adequate for the majority of customers. Users who need a higher level may find it economical to supply using distributed energy resources (DER) and other local solutions to reliability and power quality needs. Local solutions implemented by the customer may be the most cost-effective method for addressing the more stringent needs of a digital economy. These local solutions include energy storage, small distributed generators, and microgrids. This report also considers the market's role in addressing reliability issues and requirements. The customer's needs are discussed in view of issues such as power quality requirements of digital electronic equipment, the cost of outages, the cost of storage and new infrastructure, and natural gas prices. The market role in addressing these issues and requirements is explored. The economic considerations associated with the reliability issues are discussed, as well as the levels at which these economic decisions could be made. Finally, a discussion is provided of the role DER could play in addressing

Kueck, JD

2005-05-06T23:59:59.000Z

91

Measurement Practices for Reliability and Power Quality  

SciTech Connect

This report provides a distribution reliability measurement ''toolkit'' that is intended to be an asset to regulators, utilities and power users. The metrics and standards discussed range from simple reliability, to power quality, to the new blend of reliability and power quality analysis that is now developing. This report was sponsored by the Office of Electric Transmission and Distribution, U.S. Department of Energy (DOE). Inconsistencies presently exist in commonly agreed-upon practices for measuring the reliability of the distribution systems. However, efforts are being made by a number of organizations to develop solutions. In addition, there is growing interest in methods or standards for measuring power quality, and in defining power quality levels that are acceptable to various industries or user groups. The problems and solutions vary widely among geographic areas and among large investor-owned utilities, rural cooperatives, and municipal utilities; but there is still a great degree of commonality. Industry organizations such as the National Rural Electric Cooperative Association (NRECA), the Electric Power Research Institute (EPRI), the American Public Power Association (APPA), and the Institute of Electrical and Electronics Engineers (IEEE) have made tremendous strides in preparing self-assessment templates, optimization guides, diagnostic techniques, and better definitions of reliability and power quality measures. In addition, public utility commissions have developed codes and methods for assessing performance that consider local needs. There is considerable overlap among these various organizations, and we see real opportunity and value in sharing these methods, guides, and standards in this report. This report provides a ''toolkit'' containing synopses of noteworthy reliability measurement practices. The toolkit has been developed to address the interests of three groups: electric power users, utilities, and regulators. The report will also serve to support activities to develop and share information among industry and regulatory participants about critical resources and practices. The toolkit has been developed by investigating the status of indices and definitions, surveying utility organizations on information sharing, and preparing summaries of reliability standards and monitoring requirements--the issues, needs, work under way, existing standards, practices and guidelines--for the following three classifications: (1) terms and definitions of reliability; (2) power quality standards, guidelines, and measurements; and (3) activities and organizations developing and sharing information on distribution reliability. As these synopses of reliability measurement practices are provided, it must be noted that an economic penalty may be associated with requiring too high a reliability level from the distribution system for all customers. It may be appropriate for the distribution system to supply only some base, generally accepted level of reliability. This base level would be adequate for the majority of customers. Users who need a higher level may find it economical to supply using distributed energy resources (DER) and other local solutions to reliability and power quality needs. Local solutions implemented by the customer may be the most cost-effective method for addressing the more stringent needs of a digital economy. These local solutions include energy storage, small distributed generators, and microgrids. This report also considers the market's role in addressing reliability issues and requirements. The customer's needs are discussed in view of issues such as power quality requirements of digital electronic equipment, the cost of outages, the cost of storage and new infrastructure, and natural gas prices. The market role in addressing these issues and requirements is explored. The economic considerations associated with the reliability issues are discussed, as well as the levels at which these economic decisions could be made. Finally, a discussion is

Kueck, JD

2005-05-06T23:59:59.000Z

92

Energy Efficiency Resource Standard | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Efficiency Resource Standard Efficiency Resource Standard Energy Efficiency Resource Standard < Back Eligibility Investor-Owned Utility Utility Program Info State Rhode Island Program Type Energy Efficiency Resource Standard Provider Rhode Island Public Utilities Commission Rhode Island enacted legislation in 2006 requiring the state Public Utilities Commission (PUC) to establish standards for system reliability, energy efficiency and conservation procurement, including standards for energy supply diversification, distributed generation, demand response, and "prudent and reliable" energy efficiency and energy conservation measures. These standards and guidelines, which were adopted by the PUC in 2008, must be reviewed at least once every three years. Each electric and natural gas

93

General Order Ensuring Reliable Electric Service (Louisiana) | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

General Order Ensuring Reliable Electric Service (Louisiana) General Order Ensuring Reliable Electric Service (Louisiana) General Order Ensuring Reliable Electric Service (Louisiana) < Back Eligibility Investor-Owned Utility Municipal/Public Utility Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Louisiana Program Type Safety and Operational Guidelines Provider Louisiana Public Service Commission The standards set forth herein have been developed to provide consumers, the Louisiana Public Service Commission, and jurisdictional electric utilities with a uniform method of ensuring reliable electric service. The standards shall be applicable to the distribution systems of all electric utilities under the jurisdiction of the Louisiana Public Service

94

NREL: Gearbox Reliability Collaborative - Gearbox Reliability Collaborative  

NLE Websites -- All DOE Office Websites (Extended Search)

Projects Projects Gearbox deficiencies are the result of many factors. Through gearbox modeling and testing, condition monitoring, and the failure database, the collaborative is expanding the industry's knowledge base, recommending efficient and cost-effective improvements, and facilitating immediate improvements in the gearbox life cycle. Gearbox Modeling and Testing Illustration of representative gearbox including the hub, main bearing, main shaft, gearbox, brake, high speed shaft, generator, and bed plate. A complete gearbox redesign has been completed in a collaborative effort between NREL and industry partners. This process documented and analyzed the design process and produced a new gearbox design that integrates knowledge from previous Gearbox Reliability Collaborative (GRC) activities.

95

Hydropower Reliability Study  

Science Conference Proceedings (OSTI)

Though hydroelectric plants are highly reliable, even a 1% improvement in their availability could save the U.S. utility industry $125 million per year. This comprehensive review of hydropower data and practices recommends ways to achieve such improvement.

1984-03-01T23:59:59.000Z

96

Standards, Ethics  

NLE Websites -- All DOE Office Websites (Extended Search)

Standards, Ethics Ombuds Standards and Ethics Committed to the fair and equitable treatment of all employees, contractors, and persons doing business with the Laboratory. Contact...

97

Find Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

may not be available from IHS: AHRI standards - from the Air Conditioning, Heating, and Refrigeration Institute AISC standards - from the American Institute of Steel Construction...

98

Future Healthcare  

E-Print Network (OSTI)

Patients want answers, not numbers. Evidence-based medicine must have numbers to generate answers. Therefore, analysis of numbers to provide answers is the Holy Grail of healthcare professionals and its future systems. ...

Datta, Shoumen

2010-12-15T23:59:59.000Z

99

Future tense  

Science Conference Proceedings (OSTI)

Future Tense, one of the revolving features on this page, presents stories and essays from the intersection of computational science and technological speculation, their boundaries limited only by our ability to imagine what will and could be.

Rudy Rucker

2011-07-01T23:59:59.000Z

100

Strategic Standardization  

Science Conference Proceedings (OSTI)

... Program Strategic Standardization Curriculum (CMGT 564 - 2010) ... com. Curriculum ks eport, 1992), Grading (Research paper, ...

2012-12-03T23:59:59.000Z

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Hardness Standardization  

Science Conference Proceedings (OSTI)

... metallic products. • NIST produces a variety of hardness Standard Reference Materials (SRMs) for industry. • The NIST ...

2013-08-20T23:59:59.000Z

102

Photovoltaic module reliability workshop  

DOE Green Energy (OSTI)

The paper and presentations compiled in this volume form the Proceedings of the fourth in a series of Workshops sponsored by Solar Energy Research Institute (SERI/DOE) under the general theme of photovoltaic module reliability during the period 1986--1990. The reliability Photo Voltaic (PV) modules/systems is exceedingly important along with the initial cost and efficiency of modules if the PV technology has to make a major impact in the power generation market, and for it to compete with the conventional electricity producing technologies. The reliability of photovoltaic modules has progressed significantly in the last few years as evidenced by warranties available on commercial modules of as long as 12 years. However, there is still need for substantial research and testing required to improve module field reliability to levels of 30 years or more. Several small groups of researchers are involved in this research, development, and monitoring activity around the world. In the US, PV manufacturers, DOE laboratories, electric utilities and others are engaged in the photovoltaic reliability research and testing. This group of researchers and others interested in this field were brought together under SERI/DOE sponsorship to exchange the technical knowledge and field experience as related to current information in this important field. The papers presented here reflect this effort.

Mrig, L. (ed.)

1990-01-01T23:59:59.000Z

103

Tools and Techniques for Ensuring Automotive EMC Performance and Reliability  

E-Print Network (OSTI)

they generate and store significant amounts of electric energy. Cars in the future ... 8 #12;9 Lighter More Systems 3 Current automotive electronics design and integration strategies are not sustainable. Cars and wireless communication Cars in the future will have ONE reliable, low-cost, lightweight network that serves

Stuart, Steven J.

104

Managing electricity reliability risk through the futures markets  

E-Print Network (OSTI)

negatively with the electricity spot price. Consequently,is incurred only for actual electricity generation, i.e. ,to produce electricity sold as energy, and to operate any AS

Siddiqui, Afzal S.

2000-01-01T23:59:59.000Z

105

Gearbox Reliability Collaborative Update (Presentation)  

SciTech Connect

This presentation was given at the Sandia Reliability Workshop in August 2013 and provides information on current statistics, a status update, next steps, and other reliability research and development activities related to the Gearbox Reliability Collaborative.

Sheng, S.

2013-10-01T23:59:59.000Z

106

Reconsideration of Software Reliability Measurements  

Science Conference Proceedings (OSTI)

In this paper, we discuss the major weaknesses of the software reliability measurements currently used and propose a new model of software reliability estimation. For the time being, the software reliability models are employed far from ubiquitous. As ...

Shiyi Xu

2007-10-01T23:59:59.000Z

107

Future land use plan  

Science Conference Proceedings (OSTI)

The US Department of Energy`s (DOE) changing mission, coupled with the need to apply appropriate cleanup standards for current and future environmental restoration, prompted the need for a process to determine preferred Future Land Uses for DOE-owned sites. DOE began the ``Future Land Use`` initiative in 1994 to ensure that its cleanup efforts reflect the surrounding communities` interests in future land use. This plan presents the results of a study of stakeholder-preferred future land uses for the Brookhaven National Laboratory (BNL), located in central Long Island, New York. The plan gives the Laboratory`s view of its future development over the next 20 years, as well as land uses preferred by the community were BNL ever to cease operations as a national laboratory (the post-BNL scenario). The plan provides an overview of the physical features of the site including its history, topography, geology/hydrogeology, biological inventory, floodplains, wetlands, climate, and atmosphere. Utility systems and current environmental operations are described including waste management, waste water treatment, hazardous waste management, refuse disposal and ground water management. To complement the physical descriptions of the site, demographics are discussed, including overviews of the surrounding areas, laboratory population, and economic and non-economic impacts.

NONE

1995-08-31T23:59:59.000Z

108

AMENDED AND RESTATED DELEGATION AGREEMENT BETWEEN NORTH AMERICAN ELECTRIC RELIABILITY CORPORATION AND TEXAS REGIONAL ENTITY – A DIVISION OF ELECTRIC RELIABILITY  

E-Print Network (OSTI)

(“NERC”), an organization certified by the Federal Energy Regulatory Commission (“Commission”) pursuant to Section 215(c) of the Federal Power Act to establish and enforce Reliability Standards for the bulk power system, and the Texas Regional Entity – a Division of Electric Reliability Council of Texas, Inc. (“Texas RE”), an organization established to develop and enforce Reliability Standards within the geographic boundaries identified on Exhibit A to this Agreement, and for other purposes. NERC and Texas RE may be individually referred to herein as “Party ” or collectively as “Parties.” WITNESSETH WHEREAS, Subtitle A of the Electricity Modernization Act of 2005 added Section 215 to the Federal Power Act (16 U.S.C. § 824n) (hereafter “the Act”) and, among other things, provides for the establishment of an electric reliability organization (“ERO”) to develop and enforce Reliability Standards applicable to all owners, operators, and users of the bulk power system; WHEREAS, the Commission has adopted regulations for the implementation of the Act

unknown authors

2009-01-01T23:59:59.000Z

109

Reliability quantification of nuclear safety-related software  

E-Print Network (OSTI)

The objective of this study is to improve quality and reliability of safety-critical software in the nuclear industry. It is accomplished by focusing on the following two areas: Formulation of a standard extensive integrated ...

Zhang, Yi, 1973-

2004-01-01T23:59:59.000Z

110

Regulatory Commission (Commission) directs the North American Electric Reliability  

E-Print Network (OSTI)

submit to the Commission for approval proposed Reliability Standards that address the impact of geomagnetic disturbances (GMD) on the reliable operation of the Bulk-Power System. The Commission directs NERC to implement the directive in two stages. In the first stage, NERC must submit, within six months of the effective date of this Final Rule, one or more Reliability Standards that require owners and operators of the Bulk-Power System to develop and implement operational procedures to mitigate the effects of GMDs consistent with the reliable operation of the Bulk-Power System. In the second stage, NERC must submit, within 18 months of the effective date of this Final Rule, one or more Reliability Standards that require owners and operators of the Bulk-Power System to conduct initial and on-going assessments of the potential impact of benchmark GMDDocket No. RM12-22-000- 2-events on Bulk-Power System equipment and the Bulk-Power System as a whole. The Second Stage GMD Reliability Standards must identify benchmark GMD events that specify what severity GMD events a responsible entity must assess for potential impacts on the Bulk-Power System. If the assessments identify potential impacts from benchmark GMD events, the Reliability Standards should require owners and operators

Cfr Part

2013-01-01T23:59:59.000Z

111

Definition: Interconnection Reliability Operating Limit Tv | Open Energy  

Open Energy Info (EERE)

Limit Tv Limit Tv Jump to: navigation, search Dictionary.png Interconnection Reliability Operating Limit Tv The maximum time that an Interconnection Reliability Operating Limit can be violated before the risk to the interconnection or other Reliability Coordinator Area(s) becomes greater than acceptable. Each Interconnection Reliability Operating Limit's Tv shall be less than or equal to 30 minutes.[1] Related Terms Interconnection Reliability Operating Limitinterconnection, interconnection References ↑ Glossary of Terms Used in Reliability Standards An i LikeLike UnlikeLike You like this.Sign Up to see what your friends like. nline Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Interconnection_Reliability_Operating_Limit_Tv&oldid=493031

112

Reliability-based maintenance evaluations and standard preventive maintenance programs  

SciTech Connect

Due to recent issuance of 10CFR50.65, the U.S. Nuclear Regulatory Commission maintenance rule (Rule), and the [open quotes]Industry Guideline for Monitoring the Effectiveness of Maintenance at Nuclear Power Plants[close quotes] prepared by the Nuclear Management and Resources Council, many utilities are undertaking review or evaluation of current preventive maintenance (PM) programs. Although PM optimization and documentation are not specifically required by the Rule, an appropriate and effective PM program (PMP) will be the cornerstone of the successful and cost-effective implementation of the Rule. Currently, a project is being conducted at the Vermont Yankee Nuclear Power Station (VYNPS) in conjunction with Quadrex Energy Services to evaluate, optimize, and document the PMP. The project began in March 1993 and is scheduled for completion in mid-1995. The initial scope for the project is the evaluation of those structures, systems, and components that are within the scope of the Rule. Because of the number of systems to be evaluated ([approximately]50), the desired completion schedule, and cost considerations, a streamlined approach to PM optimization and documentation is being utilized.

Varno, M. (Vermont Yankee Nuclear Power Corp., Vernon, VT (United States)); McKinley, M. (Quadrex Energy Services Corp., Campbell, CA (United States))

1993-01-01T23:59:59.000Z

113

CERTS 2012 Program Review - Reliability Standards Analysis and...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Frequency Working Group on a monthly basis for selection as final candidate events that BAs will use to measure their yearly Frequency Response performance. Page 4 Frequency...

114

North American Electric Reliability Corporation (NERC): Ensuring...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

North American Electric Reliability Corporation (NERC): Ensuring a Reliable Bulk Electric System North American Electric Reliability Corporation (NERC): Ensuring a Reliable Bulk...

115

Power electronics reliability.  

Science Conference Proceedings (OSTI)

The project's goals are: (1) use experiments and modeling to investigate and characterize stress-related failure modes of post-silicon power electronic (PE) devices such as silicon carbide (SiC) and gallium nitride (GaN) switches; and (2) seek opportunities for condition monitoring (CM) and prognostics and health management (PHM) to further enhance the reliability of power electronics devices and equipment. CM - detect anomalies and diagnose problems that require maintenance. PHM - track damage growth, predict time to failure, and manage subsequent maintenance and operations in such a way to optimize overall system utility against cost. The benefits of CM/PHM are: (1) operate power conversion systems in ways that will preclude predicted failures; (2) reduce unscheduled downtime and thereby reduce costs; and (3) pioneering reliability in SiC and GaN.

Kaplar, Robert James; Brock, Reinhard C.; Marinella, Matthew; King, Michael Patrick; Stanley, James K.; Smith, Mark A.; Atcitty, Stanley

2010-10-01T23:59:59.000Z

116

Culture Representation in Human Reliability Analysis  

Science Conference Proceedings (OSTI)

Understanding human-system response is critical to being able to plan and predict mission success in the modern battlespace. Commonly, human reliability analysis has been used to predict failures of human performance in complex, critical systems. However, most human reliability methods fail to take culture into account. This paper takes an easily understood state of the art human reliability analysis method and extends that method to account for the influence of culture, including acceptance of new technology, upon performance. The cultural parameters used to modify the human reliability analysis were determined from two standard industry approaches to cultural assessment: Hofstede’s (1991) cultural factors and Davis’ (1989) technology acceptance model (TAM). The result is called the Culture Adjustment Method (CAM). An example is presented that (1) reviews human reliability assessment with and without cultural attributes for a Supervisory Control and Data Acquisition (SCADA) system attack, (2) demonstrates how country specific information can be used to increase the realism of HRA modeling, and (3) discusses the differences in human error probability estimates arising from cultural differences.

David Gertman; Julie Marble; Steven Novack

2006-12-01T23:59:59.000Z

117

Petition of the North American Electric Reliability Corporation for  

E-Print Network (OSTI)

(NERC) submitted a filing seeking FERC approval of an interpretation of Reliability Standards CIP-001-1 — Cyber Security — Sabotage Reporting, Requirement R2. 2. This filing is in accordance with 18 C.F.R. § 39.5 and Section 215(d)(1) of the Federal Power Act, which allows the Electric Reliability Organization to file a modification to a reliability standard with FERC for approval. No modification to the language contained in this specific requirement is being proposed through the interpretation. The filing consists of the developed interpretation, the Reliability Standards CIP-001-1 which includes the appended interpretation, a complete development record of the interpretation, and a roster of the interpretation development team. 3. This interpretation was approved by the NERC Board of Trustees February 16, 2010. The interpretation requested clarification of the “appropriate parties ” to whom RCs, BAs, TOs, GOs and LSEs must communicate information concerning sabotage events. The interpretation states that the term refers collectively to

Rebecca J. Michael

2011-01-01T23:59:59.000Z

118

WELDING STANDARDS  

SciTech Connect

Hanford Atomic Production Operation specification guides and standards for welding and brazing are presented. Details of this manual are given in TID- 4100 (Suppl.). (N.W.R.)

1963-01-01T23:59:59.000Z

119

Substation Reliability Centered Maintenance  

SciTech Connect

Substation Reliability Centered Maintenance (RCM) is a technique that is used to develop maintenance plans and criteria so the operational capability of substation equipment is achieved, restored, or maintained. The objective of the RCM process is to focus attention on system equipment in a manner that leads to the formulation of an optimal maintenance plan. The RCM concept originated in the airline industry in the 1970s and has been used since 1985 to establish maintenance requirements for nuclear power plants. The RCM process is initially applied during the design and development phase of equipment or systems on the premise that reliability is a design characteristic. It is then reapplied, as necessary, during the operational phase to sustain a more optimal maintenance program based on actual field experiences. The purpose of the RCM process is to develop a maintenance program that provides desired or specified levels of operational safety and reliability at the lowest possible overall cost. The objectives are to predict or detect and correct incipient failures before they occur or before they develop into major defects, reduce the probability of failure, detect hidden problems, and improve the cost-effectiveness of the maintenance program. RCM accomplishes two basic purposes: (1) It identifies in real-time incipient equipment problems, averting potentially expensive catastrophic failures by communicating potential problems to appropriate system operators and maintenance personnel. (2) It provides decision support by recommending, identifying, and scheduling preventive maintenance. Recommendations are based on maintenance criteria, maintenance history, experience with similar equipment, real-time field data, and resource constraints. Hardware and software are used to accomplish these two purposes. The RCM system includes instrumentation that monitors critical substation equipment as well as computer software that helps analyze equipment data.

Purucker, S.L.

1992-11-01T23:59:59.000Z

120

Component reliability testing  

SciTech Connect

Component and system reliability of active solare energy systems continues to be a major concern of designers, manufacturers, installers, and consumers. Six test loops were constructed at the Solar Energy Research Institute in Golden, Colorado, to thermally cycle active solar energy system components. Drain valves, check valves, air vents, vacuum breakers, tempering valves, and polybutylene pipe were included in the testing. Test results show poor reliabiity of some of the components and limited performance from others. The results lead to a better understanding of certain failures in the field and present designers with realistic expectations for these components.

Farrington, R.B.

1984-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Definition: Control Performance Standard | Open Energy Information  

Open Energy Info (EERE)

Related Terms Area Control Error References Glossary of Terms Used in Reliability Standards An LikeLike UnlikeLike You like this.Sign Up to see what your friends like. inline...

122

Definition: Disturbance Control Standard | Open Energy Information  

Open Energy Info (EERE)

Also Known As DCS Related Terms Balancing Authority, smart grid References Glossary of Terms Used in Reliability Standards An i LikeLike UnlikeLike You like this.Sign Up...

123

Revolutionizing standard operating procedures in biomanufacturing  

E-Print Network (OSTI)

In its quest to become a High Reliability Performance (HRP) organization, Amgen manufacturing operations desires to further improve its adherence to, and effectiveness of, its standard operating procedures (SOPs). SOPs are ...

Nag, Aditya

2013-01-01T23:59:59.000Z

124

RELIABILITY CONSIDERATIONS OF ELECTRONICS COMPONENTS FOR THE DEEP UNDERWATER MUON AND NEUTRINO DETECTION SYSTEM  

E-Print Network (OSTI)

Standardization Handbook, HIL-HDBK-217B, ReliabilityMilitary Standardization Handbook MIL-HDBK-217B-Reliabilitycoefficients are given in MIL-HDBK-217B Handbook for various

Leskovar, B.

2010-01-01T23:59:59.000Z

125

EOS standards  

SciTech Connect

An approach to creating accurate EOS for pressure standards is described. Applications to Cu, Au, and Ta are shown. Extension of the method to high compressions using DFT is illustrated. Comparisons with modern functionals show promise.

Greeff, Carl W [Los Alamos National Laboratory

2011-01-12T23:59:59.000Z

126

Consider insulation reliability  

SciTech Connect

This paper reports that when calcium silicate and two brands of mineral wool were compared in a series of laboratory tests, calcium silicate was more reliable. And in-service experience with mineral wool at a Canadian heavy crude refinery provided examples of many of the lab's findings. Lab tests, conducted under controlled conditions following industry accepted practices, showed calcium silicate insulation was stronger, tougher and more durable than the mineral wools to which it was compared. For instance, the calcium silicate insulation exhibited only some minor surface cracking when heated to 1,200[degrees]F (649[degrees]C), while the mineral wools suffered binder burnout resulting in sagging, delamination and a general loss of dimensional stability.

Gamboa (Manville Mechanical Insulations, a Div. of Schuller International Inc., Denver, CO (United States))

1993-01-01T23:59:59.000Z

127

(Terminology standardization)  

SciTech Connect

Terminological requirements in information management was but one of the principal themes of the 2nd Congress on Terminology and Knowledge Engineering. The traveler represented the American Society for Testing and Materials' Committee on Terminology, of which he is the Chair. The traveler's invited workshop emphasized terminology standardization requirements in databases of material properties as well as practical terminology standardizing methods. The congress included six workshops in addition to approximately 82 lectures and papers from terminologists, artificial intelligence practitioners, and subject specialists from 18 countries. There were approximately 292 registrants from 33 countries who participated in the congress. The congress topics were broad. Examples were the increasing use of International Standards Organization (ISO) Standards in legislated systems such as the USSR Automated Data Bank of Standardized Terminology, the enhanced Physics Training Program based on terminology standardization in Physics in the Chinese province of Inner Mongolia, and the technical concept dictionary being developed at the Japan Electronic Dictionary Research Institute, which is considered to be the key to advanced artificial intelligence applications. The more usual roles of terminology work in the areas of machine translation. indexing protocols, knowledge theory, and data transfer in several subject specialties were also addressed, along with numerous special language terminology areas.

Strehlow, R.A.

1990-10-19T23:59:59.000Z

128

Standard Modeling  

NLE Websites -- All DOE Office Websites (Extended Search)

Standard no es suficiente Standard no es suficiente Avanzar Volver Principal ESTOY PERDIDO!!! Si bien el Modelo Standard proporciona una descripciĂłn muy buena de los fenĂłmenos observados en los experimentos, todavĂ­a es una teorĂ­a incompleta. El problema es que el Modelo Standard no puede explicar la causa por la que existen algunas partĂ­culas, del modo en que lo hacen. Por ejemplo, aĂșn cuando los fĂ­sicos conocĂ­an las masas de todos los quarks, a excepciĂłn de la del quark top desde hace muchos años, no podĂ­an simplemente predecir en forma exacta la masa del top, sin utilizar evidencia experimental, dado que el Modelo Standard carece de un modelo matemĂĄtico para calcular el patrĂłn que siguen los valores de las masas de las partĂ­culas. Otra cuestiĂłn estĂĄ relacionada con el hecho que existen tres pares de

129

Transportation Energy Futures  

E-Print Network (OSTI)

A Comparative Analysis of Future Transportation Fuels. ucB-prominentlyin our transportation future, powering electricTransportation Energy Futures Daniel Sperling Mark A.

DeLuchi, Mark A.

1989-01-01T23:59:59.000Z

130

Office of Electricity Delivery and Energy Reliability  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Comments of Cisco Systems to Comments of Cisco Systems to Office of Electricity Delivery and Energy Reliability Department of Energy in Response to Request for Information: Addressing Policy and Logistical Challenges to Smart Grid Implementation Issued September 13, 2010 FR Doc. 2010-23251 November 30, 2010 Cisco Systems provides these Comments in response to the Request for Information ("RFI") issued by the Office of Electricity Delivery and Energy Reliability of the Department of Energy ("DOE") on September 13, 2010. The RFI seeks information across a broad range of topics, but also requests that commenters be "concise," and provide "facts and concrete recommendations that can augment the general knowledge." 1 1. Interoperability Standards and the Smart Grid

131

Strategic Insights on Security, Quality, Reliability, and Availability  

Science Conference Proceedings (OSTI)

This report provides security criteria and performance metrics for assessing the electric power system. It is part of a larger project on the strategy for managing security, quality, reliability, and availability (SQRA) performance of electric power systems. The main focus of this update is measurement of the security component. It also addresses emerging North American Electric Reliability Council (NERC) operating and planning standards and their roles in managing SQRA performance. This report is intend...

2005-03-31T23:59:59.000Z

132

Transmission Reliability | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Transmission Reliability Transmission Reliability Transmission Reliability Modernizing America's electricity infrastructure is one of the U.S. Department of Energy's top priorities. The DOE Strategic Plan states that today's electric grid needs to be more efficient, reliable, and secure. A modern, smarter electric grid may save consumers money, help our economy run more efficiently, allow rapid growth in renewable energy sources, and enhance energy reliability. The Department's research into a variety of tools that will improve advanced system monitoring, visualization, control, operations, and market structure will ultimately modernize the electricity transmission infrastructure to ease congestion, allow for increases in demand, and provide a greater degree of security. The Transmission Reliability Program is aligned with this strategic plan

133

Standards Coordination Office Homepage  

Science Conference Proceedings (OSTI)

Standards Coordination Office. ... About the Standards Coordination Office (SCO). The Standards Coordination Office of the ...

2013-07-31T23:59:59.000Z

134

Coordination). Participants include representatives from Balancing Authorities (BAs), Reliability  

E-Print Network (OSTI)

The MRO Subject Matter Expert Team is an industry stakeholder group which includes subject matter experts from MRO member organizations in various technical areas. Any materials, guidance, and views from stakeholder groups are meant to be helpful to industry participants; but should not be considered approved or endorsed by MRO staff or its board of directors unless specified. Page | 2 Disclaimer The Midwest Reliability Organization (MRO) Standards Committee (SC) is committed to providing training and non-binding guidance to industry stakeholders regarding existing and emerging Reliability Standards. Any materials, including presentations, were developed through the MRO SC by Subject Matter Experts (SMEs) from member organizations within the MRO region. In 2012, SMEs in the field of System Operator Communications were brought together to prepare a guide for complying with NERC Reliability Standard COM-002-2 (Communications and

Will Behnke; Alliant Energy; Jacalynn Bentz; Great River Energy; Marie Knox Miso; Jacalynn Bentz; Marie Knox; Terry Harbour

2013-01-01T23:59:59.000Z

135

Lithium battery safety and reliability  

DOE Green Energy (OSTI)

Lithium batteries have been used in a variety of applications for a number of years. As their use continues to grow, particularly in the consumer market, a greater emphasis needs to be placed on safety and reliability. There is a useful technique which can help to design cells and batteries having a greater degree of safety and higher reliability. This technique, known as fault tree analysis, can also be useful in determining the cause of unsafe behavior and poor reliability in existing designs.

Levy, S.C.

1991-01-01T23:59:59.000Z

136

Safety Standards  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

US DOE Workshop US DOE Workshop September 19-20, 2012 International perspective on Fukushima accident Miroslav LipĂĄr Head, Operational Safety Section M.Lipar@iaea.org +43 1 2600 22691 2 Content * The IAEA before Fukushima -Severe accidents management * The IAEA actions after Fukushima * The IAEA Action plan on nuclear safety * Measures to improve operational safety * Conclusions THE IAEA BEFORE FUKUSHIMA 4 IAEA Safety Standards IAEA Safety Standards F undamental S afety Principles Safety Fundamentals f o r p ro te c ti n g p e o p l e a n d t h e e n v i ro n m e n t IAEA Safety Standards Regulations for the Safe Transport of Radioactive Material 2005 E dit ion Safety Requirements No. T S-R-1 f o r p ro te c ti n g p e o p l e a n d t h e e n v i ro n m e n t IAEA Safety Standards Design of the Reactor Core for Nuclear Power Plants

137

STANDARD REFERENCE  

E-Print Network (OSTI)

The profession is strongly urged to use the standard reference on the financial framework in the EU, concerning endorsed IFRS in order to give a clear message to the market and to users of financial statements in and outside the EU.

unknown authors

2005-01-01T23:59:59.000Z

138

Reliability Results of NERSC Systems  

E-Print Network (OSTI)

of various systems at NERSC. They graciously provided meReliability Results of NERSC Systems Akbar Mokhtarani,William Kramer, Jason Hick NERSC - LBNL Abstract In order to

Mokhtarani, Akbar; Petascale Data Storage Institute (PDSI)

2008-01-01T23:59:59.000Z

139

Distribution Reliability Trends and Correlations  

Science Conference Proceedings (OSTI)

Distribution reliability statistics, which measure sustained interruptions, are the primary benchmark used by utilities and regulators to identify service quality and to measure performance.

2005-11-29T23:59:59.000Z

140

DURABILITY, RELIABILITY, AND SERVICE LIFE ...  

Science Conference Proceedings (OSTI)

Kaipeng Liu, Xiaohong Gu. In practical applications of PV solar cells, long-term weathering durability and reliable performance are essential. ...

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Substation Configuration Reliability 1 Reliability of Substation Configurations  

E-Print Network (OSTI)

-Repairable Components," Power Learn Electric Power Engineering Education, Module PE.PAS.U15.5, 2005. #12;SubstationSubstation Configuration Reliability 1 Reliability of Substation Configurations Daniel Nack, Iowa substation, it still contains what could be described as weak points or points of failure that would lead

McCalley, James D.

142

Technical Standards Newsletter - September 2001 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Standards Newsletter - September 2001 Standards Newsletter - September 2001 Technical Standards Newsletter - September 2001 The Standards Forum and Standards Actions - September 2001 Inside this issue: News from the DOE TEchnical Standards Program Office (TSPO) ............................ 1 Including Standards in the Education of Future Engineers......................................... 1 A Note from the Manager ...................................................................................... 3 Welcome Aboard the TSMC!...................................................................................4 Standards Actions................................................................................................ 8 DOE Receives National Environmental Excellence Award for Methods Developed through the Department's Biota

143

Technical Standards Newsletter - September 2001 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technical Standards Newsletter - September 2001 Technical Standards Newsletter - September 2001 Technical Standards Newsletter - September 2001 The Standards Forum and Standards Actions - September 2001 Inside this issue: News from the DOE TEchnical Standards Program Office (TSPO) ............................ 1 Including Standards in the Education of Future Engineers......................................... 1 A Note from the Manager ...................................................................................... 3 Welcome Aboard the TSMC!...................................................................................4 Standards Actions................................................................................................ 8 DOE Receives National Environmental Excellence Award for Methods Developed through the Department's Biota

144

Multi-Building Microgrids for a Distributed Energy Future in Portugal  

E-Print Network (OSTI)

Gas-Fired Distributed Energy Resource Characterizations”,Energy Reliability, Distributed Energy Program of the U.S.Microgrids for a Distributed Energy Future in Portugal

Mendes, Goncalo

2013-01-01T23:59:59.000Z

145

Final report on reliability and lifetime prediction.  

Science Conference Proceedings (OSTI)

This document highlights the important results obtained from the subtask of the Goodyear CRADA devoted to better understanding reliability of tires and to developing better lifetime prediction methods. The overall objective was to establish the chemical and physical basis for the degradation of tires using standard as well as unique models and experimental techniques. Of particular interest was the potential application of our unique modulus profiling apparatus for assessing tire properties and for following tire degradation. During the course of this complex investigation, extensive relevant information was generated, including experimental results, data analyses and development of models and instruments. Detailed descriptions of the findings are included in this report.

Gillen, Kenneth Todd; Wise, Jonathan; Jones, Gary D.; Causa, Al G. [Goodyear Tire and Rubber Co., Akron, OH; Terrill, Edward R. [Goodyear Tire and Rubber Co., Akron, OH; Borowczak, Marc [Goodyear Tire and Rubber Co., Akron, OH

2012-12-01T23:59:59.000Z

146

Fuel Reliability Program: Proposed RIA Acceptance Criteria  

Science Conference Proceedings (OSTI)

The NRC is in the process of finalizing the interim RIA failure criteria published in NUREG-0800, Standard Review Plan, Section 4.2, Fuel System Design, Revision 3. A technical evaluation of the RIA issue has been conducted under the auspices of the EPRI Fuel Reliability Program with the objective of proposing a final version of the interim RIA failure criteria for PCMI processes. The approach used in the technical evaluation combined experimental data from a variety of sources, including integral RIA-si...

2010-12-23T23:59:59.000Z

147

Energy Standard  

Gasoline and Diesel Fuel Update (EIA)

Bingaman Bingaman November 2011 Analysis of Impacts of a Clean www.eia.gov U.S. Department of Energy Washington, DC 20585 This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses, and forecasts are independent of approval by any other officer or employee of the United States Government. The views in this report therefore should not be construed as representing those of the U.S. Department of Energy or other Federal agencies. U.S. Energy Information Administration | Analysis of Impacts of a Clean Energy Standard as requested by Chairman Bingaman i Contacts This report, Analysis of Impacts of a Clean Energy Standard, as requested by Chairman Bingaman, was prepared

148

Energy Standard  

Gasoline and Diesel Fuel Update (EIA)

Hall Hall October 2011 Analysis of Impacts of a Clean www.eia.gov U.S. Department of Energy Washington, DC 20585 This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses, and forecasts are independent of approval by any other officer or employee of the United States Government. The views in this report therefore should not be construed as representing those of the U.S. Department of Energy or other Federal agencies. U.S. Energy Information Administration | Analysis of Impacts of a Clean Energy Standard as requested by Chairman Hall i Contacts This report, Analysis of Impacts of a Clean Energy Standard as requested by Chairman Hall, was prepared under the

149

Standard Elements  

Science Conference Proceedings (OSTI)

Table 1   ASTM standards applicable to element-level testing of composites...Composite Plates Subjected to a Distributed Load Plate flexure D 6484 Open-Hole Compression Strength of Polymer Matrix Composites Open-hole compression strength Z 5370Z Compression After Impact Strength of Fiber-Resin Composites Compression after impact Z 7225Z Mixed Mode I-Mode II...

150

Weather Normalization of Reliability Indices  

Science Conference Proceedings (OSTI)

Weather significantly increases variability of reliability indices. This project focuses on exploring statistical correlations between weather parameters and system performance indices using historical utility reliability data and weather data. Using this information, various approaches for normalizing utility performance indices for variability in weather can be developed.

2008-12-22T23:59:59.000Z

151

2004 Equipment Reliability Forum Proceedings  

Science Conference Proceedings (OSTI)

This report describes the proceedings of the EPRI 2004 Equipment Reliability Forum that was held September 13–14, 2004, in Kansas City, Missouri. This annual forum provides an opportunity for industry personnel involved in equipment reliability and related issues to exchange information and share experiences. It is structured to incorporate both formal presentations and open discussion.

2004-11-30T23:59:59.000Z

152

Boiler Reliability Optimization: Interim Guideline  

Science Conference Proceedings (OSTI)

Competitive pressures to drive costs down in the new business environment sometimes conflict with the demands of increased reliability and quality of supply. The Boiler Reliability Optimization program, which makes use of a number of applicable EPRI technologies, was developed to assess, create, and implement an effective boiler maintenance strategy for the changing business environment.

1999-11-30T23:59:59.000Z

153

High Temperature Gas Reactors: Assessment of Applicable Codes and Standards  

SciTech Connect

Current interest expressed by industry in HTGR plants, particularly modular plants with power up to about 600 MW(e) per unit, has prompted NRC to task PNNL with assessing the currently available literature related to codes and standards applicable to HTGR plants, the operating history of past and present HTGR plants, and with evaluating the proposed designs of RPV and associated piping for future plants. Considering these topics in the order they are arranged in the text, first the operational histories of five shut-down and two currently operating HTGR plants are reviewed, leading the authors to conclude that while small, simple prototype HTGR plants operated reliably, some of the larger plants, particularly Fort St. Vrain, had poor availability. Safety and radiological performance of these plants has been considerably better than LWR plants. Petroleum processing plants provide some applicable experience with materials similar to those proposed for HTGR piping and vessels. At least one currently operating plant - HTR-10 - has performed and documented a leak before break analysis that appears to be applicable to proposed future US HTGR designs. Current codes and standards cover some HTGR materials, but not all materials are covered to the high temperatures envisioned for HTGR use. Codes and standards, particularly ASME Codes, are under development for proposed future US HTGR designs. A 'roadmap' document has been prepared for ASME Code development; a new subsection to section III of the ASME Code, ASME BPVC III-5, is scheduled to be published in October 2011. The question of terminology for the cross-duct structure between the RPV and power conversion vessel is discussed, considering the differences in regulatory requirements that apply depending on whether this structure is designated as a 'vessel' or as a 'pipe'. We conclude that designing this component as a 'pipe' is the more appropriate choice, but that the ASME BPVC allows the owner of the facility to select the preferred designation, and that either designation can be acceptable.

McDowell, Bruce K.; Nickolaus, James R.; Mitchell, Mark R.; Swearingen, Gary L.; Pugh, Ray

2011-10-31T23:59:59.000Z

154

Reliability-based design optimization using efficient global reliability analysis.  

Science Conference Proceedings (OSTI)

Finding the optimal (lightest, least expensive, etc.) design for an engineered component that meets or exceeds a specified level of reliability is a problem of obvious interest across a wide spectrum of engineering fields. Various methods for this reliability-based design optimization problem have been proposed. Unfortunately, this problem is rarely solved in practice because, regardless of the method used, solving the problem is too expensive or the final solution is too inaccurate to ensure that the reliability constraint is actually satisfied. This is especially true for engineering applications involving expensive, implicit, and possibly nonlinear performance functions (such as large finite element models). The Efficient Global Reliability Analysis method was recently introduced to improve both the accuracy and efficiency of reliability analysis for this type of performance function. This paper explores how this new reliability analysis method can be used in a design optimization context to create a method of sufficient accuracy and efficiency to enable the use of reliability-based design optimization as a practical design tool.

Bichon, Barron J. (Southwest Research Institute, San Antonio, TX); Mahadevan, Sankaran (Vanderbilt University, Nashville, TN); Eldred, Michael Scott

2010-05-01T23:59:59.000Z

155

Universe Adventure Web Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

Universe Universe Adventure Web Standards for the Smart Physics Student Author: Patrick Lii - plii@ugastro.berkeley.edu Date: August 3, 2007 ABSTRACT You may be wondering: why are the Universe Adventure web standards so impor- tant? And why do I have to read this stupid document about them? The old versions of our site were plagued with messy (and faulty) coding: the pages were littered with broken links, missing images, broken flash files, and all sorts of other problems which made the site highly inaccessible. When we tried to fix these errors, we found that the coding was so incredibly messy that a simple edit like changing some of the words in a paragraph or adding an image took hours rather than minutes. In fact, the coding was so horrific that we simply constructed an entirely new site rather than making the laborious attempt to fix the old one. In order to make sure that future students working

156

NREL: Gearbox Reliability Collaborative - About the Gearbox Reliability  

NLE Websites -- All DOE Office Websites (Extended Search)

About the Gearbox Reliability Collaborative About the Gearbox Reliability Collaborative Premature gearbox failures have a significant impact on the cost of wind farm operations. In 2007, NREL initiated the Gearbox Reliability Collaborative (GRC). The project combines field testing, dynamometer testing, analysis, modeling, condition monitoring, development of a failure database, and operations and maintenance research in a multi-pronged approach to determine why wind turbine gearboxes do not always achieve their expected design life-the time period that manufacturers expect them to last. The collaborative of manufacturers, owners, operators, researchers, and consultants focuses on gearbox modeling and testing and the development of a gearbox failure database. Collaborative members also investigate gearbox

157

December 2007 Standards Forum and Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The Standards Forum & Standards Actions Page 1 December 2007 The Standards Forum & Standards Actions Page 1 December 2007 Continued on next page Technical Standards Program Manager's Note 1 Teaching Standards Development- Inspiring the Next Generation 2 The EPA Radiation Standard for Spent-Fuel Storage in a Geological Repository 3 Expanded Access to Hydrogen Codes and Standards 4 Really Following the Building Code 6 Technical Standards Manager Spotlight 7

158

T&D System Design and Construction for Enhanced Reliability and Power Quality  

Science Conference Proceedings (OSTI)

Transmission and Distribution (TD) design and construction standards and practices can impact the quality of power supplied to end users. Standards engineers lack clear guidelines on how to optimize the power quality performance of electrical systems. Traditional design and construction standards/practices are based on optimizing cost with system reliability. However, in some cases, improvement in service reliability could come at the expense of service quality. This project combines prior research from ...

2006-03-16T23:59:59.000Z

159

Laser Propulsion Standardization Issues  

SciTech Connect

It is a relevant issue in the research on laser propulsion that experimental results are treated seriously and that meaningful scientific comparison is possible between groups using different equipment and measurement techniques. However, critical aspects of experimental measurements are sparsely addressed in the literature. In addition, few studies so far have the benefit of independent confirmation by other laser propulsion groups. In this paper, we recommend several approaches towards standardization of published laser propulsion experiments. Such standards are particularly important for the measurement of laser ablation pulse energy, laser spot area, imparted impulse or thrust, and mass removal during ablation. Related examples are presented from experiences of an actual scientific cooperation between NU and DLR. On the basis of a given standardization, researchers may better understand and contribute their findings more clearly in the future, and compare those findings confidently with those already published in the laser propulsion literature. Relevant ISO standards are analyzed, and revised formats are recommended for application to laser propulsion studies.

Scharring, Stefan; Eckel, Hans-Albert [Institute of Technical Physics, German Aerospace Center (DLR), D-70569 Stuttgart, Pfaffenwaldring 38-40 (Germany); Roeser, Hans-Peter [Institute of Space Systems, University of Stuttgart, D-70569 Stuttgart, Pfaffenwaldring 31 (Germany); Sinko, John E. [Micro-Nano Global Center of Excellence, Nagoya University (Niue), Nagoya, Aichi, 464-8603 (Japan); Sasoh, Akihiro [Department of Aerospace Engineering, Nagoya University, Nagoya, Aichi, 464-8603 (Japan)

2010-10-08T23:59:59.000Z

160

Report on Wind Turbine Subsystem Reliability - A Survey of Various Databases (Presentation)  

DOE Green Energy (OSTI)

Wind industry has been challenged by premature subsystem/component failures. Various reliability data collection efforts have demonstrated their values in supporting wind turbine reliability and availability research & development and industrial activities. However, most information on these data collection efforts are scattered and not in a centralized place. With the objective of getting updated reliability statistics of wind turbines and/or subsystems so as to benefit future wind reliability and availability activities, this report is put together based on a survey of various reliability databases that are accessible directly or indirectly by NREL. For each database, whenever feasible, a brief description summarizing database population, life span, and data collected is given along with its features & status. Then selective results deemed beneficial to the industry and generated based on the database are highlighted. This report concludes with several observations obtained throughout the survey and several reliability data collection opportunities in the future.

Sheng, S.

2013-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Renesse, “Toward a reliable, secure and fault tolerant smart grid state estimation  

E-Print Network (OSTI)

Abstract—The collection and prompt analysis of synchrophasor measurements is a key step towards enabling the future smart power grid, in which grid management applications would be deployed to monitor and react intelligently to changing conditions. The potential exists to slash inefficiencies and to adaptively reconfigure the grid to take better advantage of renewables, coordinate and share reactive power, and to reduce the risk of catastrophic large-scale outages. However, to realize this potential, a number of technical challenges must be overcome. We describe a continuously active, timely monitoring framework that we have created, architected to support a wide range of grid-control applications in a standard manner designed to leverage cloud computing. Cloud computing systems bring significant advantages, including an elastic, highly available and cost-effective compute infrastructure well-suited for this application. We believe that by showing how challenges of reliability, timeliness, and security can be addressed while leveraging cloud standards, our work opens the door for wider exploitation of the cloud by the smart grid community. This paper characterizes a PMU-based state-estimation application, explains how the desired system maps to a cloud architecture, identifies limitations in the standard cloud infrastructure relative to the needs of this usecase, and then shows how we adapt the basic cloud platform options with sophisticated technologies of our own to achieve the required levels of usability, fault tolerance, and parallelism. I.

Ketan Maheshwari; Marcus Lim; Lydia Wang; Ken Birman; Robbert Van Renesse

2013-01-01T23:59:59.000Z

162

Appliances and Commercial Equipment Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

Light Emitting Diode Lamps Light Emitting Diode Lamps Sign up for e-mail updates on regulations for this and other products There are currently no energy conservation standards for light emitting diode (LED) lamps.LED lamps are comprised of an LED source, such as LED packages or LED arrays; an LED driver; an American National Standards Institute (ANSI) standard base, and other optical, thermal, mechanical, and electrical components. These LED lamps are primarily used in residential applications as replacement lamps. The Department of Energy (DOE) will conduct an analysis of the energy, emissions, and costs associated with LEDs during any future energy conservation standard rulemakings. The Standards and Test Procedures for this product are related to Rulemaking for Light-Emitting Diode Lamps Test Procedure.

163

May 2007 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technical Technical Standards in Revision 1 DOE Technical Standards Posted in RevCom for TSP 1 DOE Technical Standards in Reaffirmation 1 DOE Technical Standards Change Notices 1 DOE Technical Standards Published 1 Non-Government Standards Actions 2

164

Inherently Reliable Boiler Component Design  

Science Conference Proceedings (OSTI)

This report summarizes the lessons learned during the last decade in efforts to improve the reliability and availability of boilers used in the production of electricity. The information in this report can assist in component modifications and new boiler designs.

2003-03-31T23:59:59.000Z

165

Safety, Codes, and Standards Fact Sheet  

NLE Websites -- All DOE Office Websites (Extended Search)

Standards Hydrogen and fuel cell technologies are poised to play an integral role in our energy future. Hydrogen, a versatile fuel with a history of safe use in industrial...

166

2013 Transmission Reliability Program Peer Review | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transmission Reliability Program Peer Review Transmission Reliability Program Peer Review 2013 Transmission Reliability Program Peer Review The Transmission Reliability Program Peer Review included six sessions over 2 days on June 27 - 28, 2013. Presentations are available through the individual session links. The agenda and introduction by Joe Eto, LBNL, are available below. Day 1: June 27 Session I Baselining Studies and Analysis, Bharat Bhargava, EPG Baselining Studies and Analysis, Brett Amidan, PNNL Synchrophasor Standards Support and Development, Ken Martin, EPG Session II Advanced Synchrophasor Metrology, Stan Hadley, ORNL GPS Issue Management, Mark Buckner, ORNL Technology Assessment for Next Generation PMU, Mark Buckner, ORNL Session III Measurement-Based Stability Assessment, Dan Trudnowski, U. Montana

167

EPRI Distribution Reliability Practices Repository  

Science Conference Proceedings (OSTI)

 A key objective of the Electric Power Research Institute’s (EPRI’s) research into distribution reliability practices is to identify, document, and provide practice summary descriptions to research participants in a format that facilitates comparison and aids decision makers in identifying the practices in place at other utilities that can be applied to a decision maker’s utility to improve performance.This report presents distribution reliability practice results ...

2012-10-19T23:59:59.000Z

168

Photovoltaics performance and reliability workshop  

DOE Green Energy (OSTI)

This document consists of papers and viewgraphs compiled from the proceedings of a workshop held in September 1992. This workshop was the fifth in a series sponsored by NREL/DOE under the general subject areas of photovoltaic module testing and reliability. PV manufacturers, DOE laboratories, electric utilities and others exchanged technical knowledge and field experience. The topics of cell and module characterization, module and system performance, materials and module durability/reliability research, solar radiation, and applications are discussed.

Mrig, L. [ed.] [ed.

1992-11-01T23:59:59.000Z

169

Photovoltaics performance and reliability workshop  

DOE Green Energy (OSTI)

This document consists of papers and viewgraphs compiled from the proceedings of a workshop held in September 1992. This workshop was the fifth in a series sponsored by NREL/DOE under the general subject areas of photovoltaic module testing and reliability. PV manufacturers, DOE laboratories, electric utilities and others exchanged technical knowledge and field experience. The topics of cell and module characterization, module and system performance, materials and module durability/reliability research, solar radiation, and applications are discussed.

Mrig, L. (ed.) [ed.

1992-01-01T23:59:59.000Z

170

Options for Kentucky's Energy Future  

Science Conference Proceedings (OSTI)

Three important imperatives are being pursued by the Commonwealth of Kentucky: ? Developing a viable economic future for the highly trained and experienced workforce and for the Paducah area that today supports, and is supported by, the operations of the US Department of Energy’s (DOE’s) Paducah Gaseous Diffusion Plant (PGDP). Currently, the PGDP is scheduled to be taken out of service in May, 2013. ? Restructuring the economic future for Kentucky’s most abundant indigenous resource and an important industry – the extraction and utilization of coal. The future of coal is being challenged by evolving and increasing requirements for its extraction and use, primarily from the perspective of environmental restrictions. Further, it is important that the economic value derived from this important resource for the Commonwealth, its people and its economy is commensurate with the risks involved. Over 70% of the extracted coal is exported from the Commonwealth and hence not used to directly expand the Commonwealth’s economy beyond the severance taxes on coal production. ? Ensuring a viable energy future for Kentucky to guarantee a continued reliable and affordable source of energy for its industries and people. Today, over 90% of Kentucky’s electricity is generated by burning coal with a delivered electric power price that is among the lowest in the United States. Anticipated increased environmental requirements necessitate looking at alternative forms of energy production, and in particular electricity generation.

Larry Demick

2012-11-01T23:59:59.000Z

171

Catalog of Standards  

Science Conference Proceedings (OSTI)

... Catalog of Standards. ... As of May 2013, the number of standards or standards components added to the Catalog of Standards stands at 56. ...

2013-07-31T23:59:59.000Z

172

STANDARD SOLAR NEUTRINOS  

E-Print Network (OSTI)

The predictions of an improved standard solar model are compared with the observations of the four solar neutrino experiments. The improved model includes premain sequence evolution, element diffusion, partial ionization effects, and all the possible nuclear reactions between the main elements. It uses updated values for the initial solar element abundances, the solar age, the solar luminosity, the nuclear reaction rates and the radiative opacities. Neither nuclear equilibrium, nor complete ionization are assumed. The calculated 8 B solar neutrino flux is consistent, within the theoretical and experimental uncertainties, with the solar neutrino flux measured by Kamiokande. The results from the 37 Cl and 71 Ga radiochemical experiments seem to suggest that the terrestrial 7 Be solar neutrino flux is much smaller than that predicted. However, the present terrestrial “defecit ” of 7 Be solar neutrinos may be due to the use of inaccurate theoretical neutrino absorption cross sections near threshold for extracting solar neutrino fluxes from production rates. Conclusive evidence for a real deficit of 7 Be solar neutrinos will require experiments such as BOREXINO or HELLAZ. A real defecit of 7 Be solar neutrinos can be due to either astrophysical reasons or neutrino properties beyond the standard electroweak model. Only future neutrino experiments, such as SNO, Superkamiokande, BOREXINO and HELLAZ, will be able to provide conclusive evidence that the solar neutrino problem is a consequence of neutrino properties beyond the standard electroweak model. Earlier indications may be provided by long baseline neutrino oscillation experiments. 1

Arnon Dar

2008-01-01T23:59:59.000Z

173

A technique for early software reliability prediction  

Science Conference Proceedings (OSTI)

In early developmental stages of software, failure data is not available to determine the reliability of software. But developers need reliability prediction for quality assessment and resource planning. We propose a model based on Reliability Block ...

Rakesh Tripathi; Rajib Mall

2005-12-01T23:59:59.000Z

174

Federal Information Processing Standards  

Science Conference Proceedings (OSTI)

... Federal Information Processing Standards Publications (FIPS PUBS). ... Replacement Standards for Withdrawn FIPS on Geographic Codes.

2013-07-30T23:59:59.000Z

175

March 2007 Standards Forum and Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 2007 March 2007 Continued on next page TSP Manager's Notes 1 Domestic Programs (American National Standards) Overview 2 Aerospace Industry Advocates Standards Selection Based on Technical Merit, Not Semantics 3 Report Recommends Withdrawal of OMB Risk Assessment Bulletin 4 Technical Standards Manager Spotlight 5 Topical Committee Developments 6 Welcome Aboard the TSMC! 7 Standards Actions 8 DOE Standards Actions 8

176

AMENDED AND RESTATED DELEGATION AGREEMENT BETWEEN NORTH AMERICAN ELECTRIC RELIABILITY CORPORATION AND TEXAS RELIABILITY ENTITY, INC. AMENDED AND RESTATED DELEGATION AGREEMENT (“Agreement”) made  

E-Print Network (OSTI)

an organization certified by the Federal Energy Regulatory Commission (“Commission”) pursuant to Section 215(c) of the Federal Power Act to establish and enforce Reliability Standards for the Bulk-Power System, and Texas Reliability Entity, Inc. (“Texas RE”) , an organization established to develop and enforce Reliability Standards within the geographic boundaries identified on Exhibit A to this Agreement, and for other purposes. NERC and Texas RE may be individually referred to herein as “Party ” or collectively as “Parties.” WITNESSETH WHEREAS, Subtitle A of the Electricity Modernization Act of 2005 added Section 215 to the Federal Power Act (16 U.S.C. § 824n) (hereafter “the Act”), which, among other things, provides for the establishment of an electric reliability organization (“ERO”) to develop and enforce Reliability Standards applicable to all owners, operators, and users of the Bulk-Power System; WHEREAS, the Commission has adopted regulations for the implementation of the Act, which are set forth at Chapter I, Title 18, Code of Federal Regulations, Part 39 (the “ERO Regulations”); WHEREAS, the Commission has certified NERC as the ERO that will, in accordance with the Act, establish and enforce Reliability Standards for the Bulk-Power System, subject to certain delegation provisions described below; WHEREAS, the Act recognizes the international interdependency of electric reliability within North America and envisions the ERO and such applicable Regional Entities as international organizations;

unknown authors

2011-01-01T23:59:59.000Z

177

Human Reliability Considerations for Small Modular Reactors  

DOE Green Energy (OSTI)

Small modular reactors (SMRs) are a promising approach to meeting future energy needs. Although the electrical output of an individual SMR is relatively small compared to that of typical commercial nuclear plants, they can be grouped to produce as much energy as a utility demands. Furthermore, SMRs can be used for other purposes, such as producing hydrogen and generating process heat. The design characteristics of many SMRs differ from those of current conventional plants and may require a distinct concept of operations. The U.S. Nuclear Regulatory Commission (NRC) conducted research to examine the human factors engineering and the operational aspects of SMRs. The research identified thirty potential human-performance issues that should be considered in the NRC's reviews of SMR designs and in future research activities. The purpose of this report is to illustrate how the issues can support SMR probabilistic risk analyses and their review by identifying potential human failure events for a subset of the issues. As part of addressing the human contribution to plant risk, human reliability analysis practitioners identify and quantify the human failure events that can negatively impact normal or emergency plant operations. The results illustrated here can be generalized to identify additional human failure events for the issues discussed and can be applied to those issues not discussed in this report.

OHara J. M.; Higgins, H.; DAgostino, A.; Erasmia, L.

2012-01-27T23:59:59.000Z

178

Electric Energy Challenges of the Future Future Grid Thrust Area 1 White Paper  

E-Print Network (OSTI)

being developed for the smart grid will change grid operations and grid characteristics. With high- prove system reliability and facilitate the management of variable renewable resources. Smart Grid Technologies Future smart grid technologies will also impact reserve requirement determination and our ability

179

Renewable Portfolio Standard | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Portfolio Standard Portfolio Standard Renewable Portfolio Standard < Back Eligibility Investor-Owned Utility Retail Supplier Savings Category Bioenergy Biofuels Alternative Fuel Vehicles Water Buying & Making Electricity Solar Wind Program Info State Illinois Program Type Renewables Portfolio Standard In August 2007, Illinois enacted legislation (Public Act 095-0481) that created the Illinois Power Agency (IPA). The agency's purpose is to develop electricity procurement plans for investor-owned electric utilities (EUs) supplying over 100,000 Illinois customers to ensure "adequate, reliable, affordable, efficient, and environmentally sustainable electric service at the lowest total cost." The only EUs that meet these criteria and are therefore subject to the IPA procurement process are Commonwealth

180

High-reliability computing for the smarter planet  

SciTech Connect

The geometric rate of improvement of transistor size and integrated circuit performance, known as Moore's Law, has been an engine of growth for our economy, enabling new products and services, creating new value and wealth, increasing safety, and removing menial tasks from our daily lives. Affordable, highly integrated components have enabled both life-saving technologies and rich entertainment applications. Anti-lock brakes, insulin monitors, and GPS-enabled emergency response systems save lives. Cell phones, internet appliances, virtual worlds, realistic video games, and mp3 players enrich our lives and connect us together. Over the past 40 years of silicon scaling, the increasing capabilities of inexpensive computation have transformed our society through automation and ubiquitous communications. In this paper, we will present the concept of the smarter planet, how reliability failures affect current systems, and methods that can be used to increase the reliable adoption of new automation in the future. We will illustrate these issues using a number of different electronic devices in a couple of different scenarios. Recently IBM has been presenting the idea of a 'smarter planet.' In smarter planet documents, IBM discusses increased computer automation of roadways, banking, healthcare, and infrastructure, as automation could create more efficient systems. A necessary component of the smarter planet concept is to ensure that these new systems have very high reliability. Even extremely rare reliability problems can easily escalate to problematic scenarios when implemented at very large scales. For life-critical systems, such as automobiles, infrastructure, medical implantables, and avionic systems, unmitigated failures could be dangerous. As more automation moves into these types of critical systems, reliability failures will need to be managed. As computer automation continues to increase in our society, the need for greater radiation reliability is necessary. Already critical infrastructure is failing too frequently. In this paper, we will introduce the Cross-Layer Reliability concept for designing more reliable computer systems.

Quinn, Heather M [Los Alamos National Laboratory; Graham, Paul [Los Alamos National Laboratory; Manuzzato, Andrea [UNIV OF PADOVA; Dehon, Andre [UNIV OF PENN; Carter, Nicholas [INTEL CORPORATION

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Electricity & Energy Reliability (WFP) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electricity & Energy Reliability (WFP) Electricity & Energy Reliability (WFP) The purpose of the workforce Plan is to provide focus and direction to Human Resources (HR) strategy....

182

Recommendations to Address Power Reliability Concerns Raised...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Reliability Concerns Raised as a Result of Pending Environmental Regulations for Electric Generation Stations Recommendations to Address Power Reliability Concerns Raised as a...

183

Demand Response as a System Reliability Resource  

NLE Websites -- All DOE Office Websites (Extended Search)

Demand Response as a System Reliability Resource Title Demand Response as a System Reliability Resource Publication Type Report Year of Publication 2012 Authors Eto, Joseph H.,...

184

Comments of North American Electric Reliability Corporation ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

American Electric Reliability Corporation (NERC) to DOE Smart Grid RFI: Addressing Policy and Logistical Challenges Comments of North American Electric Reliability Corporation...

185

Information Concerning Reliability Impacts under Various System...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Information Concerning Reliability Impacts under Various System Configurations of the Mirant Potomac River Plant Information Concerning Reliability Impacts under Various System...

186

Maximal Reliability for Unit-weighted Composites  

E-Print Network (OSTI)

Maximal Reliability for Unit-weighted Composites Peter M.Maximal Reliability for Unit-weighted Composites Althoughconsistency coefficient for a unit-weighted composite. The

Peter M. Bentler

2011-01-01T23:59:59.000Z

187

Reliability Technology earns prestigious Los Alamos award  

NLE Websites -- All DOE Office Websites (Extended Search)

Reliability Technology earns award Reliability Technology earns prestigious Los Alamos award LANL has honored Michael Hamada, Harry Martz and a team of researchers with its first...

188

Office of Electricity Delivery and Energy Reliability FY 2010 Budget |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FY 2010 FY 2010 Budget Office of Electricity Delivery and Energy Reliability FY 2010 Budget The FY 2010 Office of Electricity Delivery and Energy Reliability (OE) budget request is $208.0 million, $71.0 million more than the FY 2009 Appropriation. This increase reflects increased investments in research and development, particularly in energy storage, smart grid technologies, and cyber security areas. OE will also establish one of the Department's multi-disciplinary Energy Innovation Hubs (Hubs) that specifically focuses on Grid Materials, Devices, and Systems. The FY 2010 budget proposes a budget structure change to better align with the Department's priorities to establish a clean, secure energy future. Office of Electricity Delivery and Energy Reliability FY 2010 Budget

189

Advanced Distributed Energy Resource Compliant Distribution Circuits for High Reliability  

Science Conference Proceedings (OSTI)

Electric power distribution systems and their designs have not advanced much over the past 50 years. Industry restructuring has caused many utilities to defer infrastructure investments, and implement business as usual and conservative distribution system expansion plans. Many drivers are now causing utilities to rethink how the infrastructure of the future should be built out and how best to incorporate new technology. Drivers include higher demand for reliability, the ability to better manage loads, in...

2005-12-14T23:59:59.000Z

190

External (SON) - Primary Standards Laboratory (PSL) Website  

NLE Websites -- All DOE Office Websites (Extended Search)

Home Home Fact Sheets Links Contacts Primary Standards Laboratory Enter keyword below to search the PSL site: Search! The Primary Standards Laboratory (PSL) develops and maintains primary standards traceable to national standards and calibrates and certifies customer reference standards. The PSL provides technical guidance, support, and consultation; develops precision measurement techniques; provides oversight, including technical surveys and measurement audits; and anticipates future measurement needs of the nuclear weapons complex and other Department of Energy programs. The PSL also helps industry, universities, and government agencies establish or verify new capabilities and products and improve measurement technology. NVLAP Accreditation NVLAP Accreditation

191

Exceptional situations and program reliability  

Science Conference Proceedings (OSTI)

It is difficult to write programs that behave correctly in the presence of run-time errors. Proper behavior in the face of exceptional situations is important to the reliability of long-running programs. Existing programming language features often provide ... Keywords: Error handling, compensating transactions, linear sagas, linear types, resource management

Westley Weimer; George C. Necula

2008-03-01T23:59:59.000Z

192

Wind turbine reliability database update.  

SciTech Connect

This report documents the status of the Sandia National Laboratories' Wind Plant Reliability Database. Included in this report are updates on the form and contents of the Database, which stems from a fivestep process of data partnerships, data definition and transfer, data formatting and normalization, analysis, and reporting. Selected observations are also reported.

Peters, Valerie A.; Hill, Roger Ray; Stinebaugh, Jennifer A.; Veers, Paul S.

2009-03-01T23:59:59.000Z

193

May 2006 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Standards Actions 1 Standards Actions 1 New Projects and Technical Standards in Revision 1 DOE Technical Standards Posted in RevCom for TSP 1 DOE Technical Standards in Reaffirmation 1 DOE Technical Standards Change Notices 1 DOE Technical Standards Published 1 Non-Government Standards Actions 1 American National Standards Institute (ANSI) 1 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection Association (NFPA) 2

194

Composite System based Multi-Area Reliability Evaluation  

E-Print Network (OSTI)

Currently, major power systems almost invariably operate under interconnected conditions to transfer power in a stable and reliable manner. Multi-area reliability evaluation has thus become an invaluable tool in the planning and operation of such systems. Multi - area reliability evaluation is typically done by considering equivalent tie lines between different areas in an integrated power system. It gives approximate results for the reliability indices of a power system as it models each of the areas as a single node to which are connected the entire area generation and loads. The intratransmission lines are only indirectly modeled during the calculation of equivalent tie lines' capacities. This method is very widely used in the power industry, but the influence of the various approximations and assumptions, which are incorporated in this method, on reliability calculations has not been explored. The objective of the research work presented in this thesis is the development of a new method called Composite system based multi - area reliability model, which does multi - area reliability evaluation considering the whole composite system. It models the transmission system in detail and also takes into account the loss sharing policy within an area and no - load loss sharing policy among the areas. The proposed method is applied to standard IEEE 24 bus Reliability Test System (RTS) and the traditional equivalent tie-line method is applied to the multi-area configuration of the same test system. The results obtained by both the methods are analyzed and compared. It is found that the traditional model, although having some advantages, may not give accurate results.

Nagarajan, Ramya

2009-12-01T23:59:59.000Z

195

Appliance Energy Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

Stove, washer, dryer, refrigerator, Energy Star Label Appliance Energy Standards Energy Efficiency Standard The Energy Efficiency Standards Group analyzes technical, economic, and...

196

ISO Standards Documents  

Science Conference Proceedings (OSTI)

ISO/TC 34: Food products and TC 34/SC 17: Management systems for food safety ISO Standards Documents iso3rss ISO Standards Development ISO Standards Development

197

APS beamline standard components handbook  

SciTech Connect

It is clear that most Advanced Photon Source (APS) Collaborative Access Team (CAT) members would like to concentrate on designing specialized equipment related to their scientific programs rather than on routine or standard beamline components. Thus, an effort is in progress at the APS to identify standard and modular components of APS beamlines. Identifying standard components is a nontrivial task because these components should support diverse beamline objectives. To assist with this effort, the APS has obtained advice and help from a Beamline Standardization and Modularization Committee consisting of experts in beamline design, construction, and operation. The staff of the Experimental Facilities Division identified various components thought to be standard items for beamlines, regardless of the specific scientific objective of a particular beamline. A generic beamline layout formed the basis for this identification. This layout is based on a double-crystal monochromator as the first optical element, with the possibility of other elements to follow. Pre-engineering designs were then made of the identified standard components. The Beamline Standardization and Modularization Committee has reviewed these designs and provided very useful input regarding the specifications of these components. We realize that there will be other configurations that may require special or modified components. This Handbook in its current version (1.1) contains descriptions, specifications, and pre-engineering design drawings of these standard components. In the future, the APS plans to add engineering drawings of identified standard beamline components. Use of standard components should result in major cost reductions for CATs in the areas of beamline design and construction.

Kuzay, T.M.

1992-01-01T23:59:59.000Z

198

September 2006 Standards Forum/Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 2006 September 2006 TSP Manager's Notes 1 TEN YEARS AFTER THE NTTAA: 1996-2006 2 Committee on Nuclear Fuel Cycle Approves Two New Standards 4 Renewable Portfolio Standards Help Wind Industry to Sail 5 Technical Standards Manager Spotlight 5 World Standards Day 2006 in

199

MEMS Reliability: Infrastructure, Test Structures, Experiments, and Failure Modes  

Science Conference Proceedings (OSTI)

The burgeoning new technology of Micro-Electro-Mechanical Systems (MEMS) shows great promise in the weapons arena. We can now conceive of micro-gyros, micro-surety systems, and micro-navigators that are extremely small and inexpensive. Do we want to use this new technology in critical applications such as nuclear weapons? This question drove us to understand the reliability and failure mechanisms of silicon surface-micromachined MEMS. Development of a testing infrastructure was a crucial step to perform reliability experiments on MEMS devices and will be reported here. In addition, reliability test structures have been designed and characterized. Many experiments were performed to investigate failure modes and specifically those in different environments (humidity, temperature, shock, vibration, and storage). A predictive reliability model for wear of rubbing surfaces in microengines was developed. The root causes of failure for operating and non-operating MEMS are discussed. The major failure mechanism for operating MEMS was wear of the polysilicon rubbing surfaces. Reliability design rules for future MEMS devices are established.

TANNER,DANELLE M.; SMITH,NORMAN F.; IRWIN,LLOYD W.; EATON,WILLIAM P.; HELGESEN,KAREN SUE; CLEMENT,J. JOSEPH; MILLER,WILLIAM M.; MILLER,SAMUEL L.; DUGGER,MICHAEL T.; WALRAVEN,JEREMY A.; PETERSON,KENNETH A.

2000-01-01T23:59:59.000Z

200

Defining Requirements for Improved Photovoltaic System Reliability  

DOE Green Energy (OSTI)

Reliable systems are an essential ingredient of any technology progressing toward commercial maturity and large-scale deployment. This paper defines reliability as meeting system fictional requirements, and then develops a framework to understand and quantify photovoltaic system reliability based on initial and ongoing costs and system value. The core elements necessary to achieve reliable PV systems are reviewed. These include appropriate system design, satisfactory component reliability, and proper installation and servicing. Reliability status, key issues, and present needs in system reliability are summarized for four application sectors.

Maish, A.B.

1998-12-21T23:59:59.000Z

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Research Opportunities in Reliability of Photovoltaic Modules (Presentation)  

DOE Green Energy (OSTI)

The motivation for an increased scope and a more proactive effort in reliability research of photovoltaic modules and systems includes reducing the levelized cost of energy and gaining better confidence in the energy and financial payback for photovoltaic systems. This increased reliability and confidence will lead to greater penetration of photovoltaics in the energy portfolio and greater employment in photovoltaics and related industries. Present research needs include the fundamental degradation mechanisms of polymers, connectors and other module components, mapping of failure mechanisms observed in the field to those in accelerated lifetime tests, determining the acceleration factors, and improving standards for modules such that tests can appropriately be assigned to evaluate their long term durability. Specific mechanisms discussed are corrosion in module components, metastability in thin-film active layers, delamination and loss of elastic properties in module polymeric materials, and inverter failure. Presently, there is hiring of reliability scientists and engineers at many levels of the value chain for photovoltaics.

Hacke, P.

2010-05-01T23:59:59.000Z

202

Renewable Electricity Futures (Presentation)  

DOE Green Energy (OSTI)

This presentation summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050.

Hand, M. M.

2012-09-01T23:59:59.000Z

203

Renewable Electricity Futures (Presentation)  

SciTech Connect

This presentation summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050.

Mai, T.

2013-04-01T23:59:59.000Z

204

Renewable Electricity Futures (Presentation)  

SciTech Connect

This presentation library summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050.

Mai, T.

2012-10-01T23:59:59.000Z

205

Renewable Electricity Futures (Presentation)  

Science Conference Proceedings (OSTI)

This presentation summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050.

Mai, T.

2012-11-01T23:59:59.000Z

206

Gearbox Reliability Collaborative Bearing Calibration  

DOE Green Energy (OSTI)

NREL has initiated the Gearbox Reliability Collaborative (GRC) to investigate the root cause of the low wind turbine gearbox reliability. The GRC follows a multi-pronged approach based on a collaborative of manufacturers, owners, researchers and consultants. The project combines analysis, field testing, dynamometer testing, condition monitoring, and the development and population of a gearbox failure database. At the core of the project are two 750kW gearboxes that have been redesigned and rebuilt so that they are representative of the multi-megawatt gearbox topology currently used in the industry. These gearboxes are heavily instrumented and are tested in the field and on the dynamometer. This report discusses the bearing calibrations of the gearboxes.

van Dam, J.

2011-10-01T23:59:59.000Z

207

Future Electronics in CNST  

Science Conference Proceedings (OSTI)

... Electronic Transport in Nanoscale Organic/Inorganic Devices. ... for graphene, nanophotonic, nanoplasmonic, spintronic, and other future electronics. ...

2013-05-02T23:59:59.000Z

208

Emerging Grid Reliability Improvement Technologies  

Science Conference Proceedings (OSTI)

The initial phase of a planned comprehensive Eastern Interconnection (EI) segmentation study is complete. As part of the preparations for completion of the EI study, and to carry out a similar effort for the Western Interconnection (WI), it was necessary to first investigate the potential of other technologies to compete with segmentation. This report discusses emerging grid reliability improvement technologies, providing a perspective on the pros and cons of segmentation, the grid shock absorber concept...

2007-10-29T23:59:59.000Z

209

April 2006 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 1 New Projects and Technical Standards in Revision 1 DOE Technical Standards Posted in RevCom for TSP 1 DOE Technical Standards in Reaffirmation 1 DOE Technical Standards Change Notices 1 DOE Technical Standards Published 1 Non-Government Standards Actions 1 American National Standards Institute (ANSI) 1 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection Association (NFPA) 2 DOE Technical Standards Program Document Status

210

Standard-Related Links  

Science Conference Proceedings (OSTI)

... Standard-Related Links. ... Association for Clinical Chemistry ACS - American Chemical Society ANSI - American National Standards Institute AOAC ...

2013-06-28T23:59:59.000Z

211

Standard Reference Materials  

Science Conference Proceedings (OSTI)

... Inn, KGW, Liggett, WS, and Hutchinson, JMR (1984), "The National Bureau of Standards Rocky Flats Soil Standard Reference Material," Nuclear ...

212

Federal Technical Standards Workshop  

Science Conference Proceedings (OSTI)

... missions, authorities, priorities, and budget resources.". ... of developing a strategic standards management plan. ... Director of NIST's Office of Standards ...

2010-10-05T23:59:59.000Z

213

Appliances and Commercial Equipment Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

Ceiling Fans Ceiling Fans Sign up for e-mail updates on regulations for this and other products The Department of Energy (DOE) has had the authority to regulate the energy efficiency level of ceiling fan since 2005. A ceiling fan is a "nonportable device that is suspended from a ceiling for circulating air via the rotation of fan blades" (42 U.S.C. 6291(49)). The Energy Policy Act of 2005 (EPACT 2005) amended the Energy Policy and Conservation Act of 1975 (EPCA) setting standards for ceiling fans. DOE will conduct an analysis of energy, emission and cost reductions when it reviews these standards in future rulemakings. Recent Updates | Standards | Test Procedures | Waiver, Exception, and Exemption Information | Statutory Authority | Historical Information | Contact Information

214

Energy Department Releases Study of Electricity System Ahead of Proposed EPA Air Quality Standards  

Energy.gov (U.S. Department of Energy (DOE))

In anticipation of forthcoming Environmental Protection Agency proposals for clean air standards, DOE released a new report examining the potential impact those proposed standards could have on the reliability of our nation’s energy systems.

215

October 2005 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Standards Actions 1 Standards Actions 1 New Projects and DOE Technical Standards in Revision 1 DOE Technical Standards Posted in RevCom for TSP 1 DOE Technical Standards in Reaffirmation 1 DOE Technical Standards Change Notices 1 DOE Technical Standards Recently Published 1 Non-Government Standards Actions 1 American National Standards Institute (ANSI) 1 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 American Nuclear Society (ANS) 2 National Fire Protection Association (NFPA) 2 DOE Technical Standards Program

216

Reliability-Centered Maintenance | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Reliability-Centered Maintenance Reliability-Centered Maintenance Reliability-Centered Maintenance October 7, 2013 - 9:48am Addthis Reliability-centered maintenance leverages the same practices and technologies of predictive maintenance. The difference is that reliability-centered maintenance recognizes that: Equipment design and operations differ Different equipment has different probabilities of failure All equipment is not of equal importance to facility operations Facilities have limited financial and personnel resources. While reliability-centered maintenance relies on predictive maintenance practices and technologies, it also recognizes that maintenance on inexpensive and/or unimportant equipment may be better served by a reactive or predictive maintenance approach. Each of the aforementioned factors are

217

NREL: Wind Research - Gearbox Reliability Collaborative  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Research Search More Search Options Site Map Premature gearbox failures have a significant impact on the cost of wind farm operations. In 2007, NREL initiated the Gearbox Reliability Collaborative (GRC). The project combines analysis, field testing, dynamometer testing, condition monitoring, and the development and population of a gearbox failure database in a multi-pronged approach to determine why many wind turbine gearboxes do not achieve their expected design life-the time period that manufacturers expect them to last. Read about: The Gearbox Reliability Collaborative Gearbox Reliability Collaborative Projects Gearbox Reliability Collaborative Research and Development Working with the Gearbox Reliability Collaborative Gearbox Reliability Collaborative Publications

218

DOE Directives, Regulations, and Standards Portal - Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

Globe Image Department of Energy (DOE) Technical Standards Program Home Search Approved Standards Recently Approved RevCom Logo RevCom for TSP Drafts for Review Registered Projects...

219

Electric Transmission and Distribution Future R&D Needs Planning, Operation, Control, and Visualization  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

27-28, 2013 27-28, 2013 Washington, DC FY13 DOE/CERTS Transmission Reliability R&D Internal Program Review Research Projects Reliability Standards Analysis and Assessments  Frequency Response Event Collection and Analysis  NERC Interconnections 2012 Annual Grid Reliability Performance Analysis and Report Page 1 Reliability Standards Analysis and Assessment  Objective: Collect grid data and conduct grid reliability performance analysis to support the NERC committees/groups (Resources Subcommittee and RS- Frequency Working Group) in the following ways: - Perform grid reliability metrics analysis using data collected in CERTS applications as requested by the RS - Analyze collected data to assess reliability performance at different levels - Interconnection, Reliability Coordinator, Balancing Authority

220

NIST Global Standards Information Global Standards News  

Science Conference Proceedings (OSTI)

... 2010 The National Institute of Standards and Technology (NIST) has advised the Federal Energy Regulatory Commission ... DGI), Austin, Texas, were ...

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

NIST Global Standards Information Standards Education  

Science Conference Proceedings (OSTI)

... Grants supporting the development of new learning resources and course modules integrating standards into the formal curriculum in Business and ...

222

September 2005 Standards Forum and Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Page September 2005 Page September 2005 TSP Manager's Notes 1 The Halo Effect: American National Standards and the rest 2 Standards Development for Report- ing of Declarable Substances 5 Technical Standards Manager Spotlight 8 DOE Revises "Integration of Environment, Safety, and Health

223

December 2006 Standards Forum and Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

December 2006 December 2006 TSP Manager's Notes 1 Meeting In The Middle 2 Plain Talk for a New Generation 3 Licensing New Nuclear Power Plants 4 ANSI Government Affairs Overview 5 Technical Standards Manager Spotlight 7 Topical Committee Developments 8 Welcome Aboard the TSMC! 8 Standards Actions 9 DOE Standards Actions 9

224

November 2005 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Technical DOE Technical Standards in Revision 1 DOE Technical Standards Posted in RevCom for TSP 1 DOE Technical Standards in Reaffirmation 1 DOE Technical Standards Change Notices 1 DOE Technical Standards Revisions 1 Non-Government Standards Actions 1 American National Standards Institute (ANSI) 1 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection Association

225

April 2007 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Projects and Technical Standards in Revision 1 DOE Technical Standards Posted in RevCom for TSP 1 DOE Technical Standards in Reaffirmation 1 DOE Technical Standards Change Notices 1 Technical Standards Published 2 Non-Government Standards Actions 2 American National Standards Institute (ANSI) 2 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection Association (NFPA) 2 DOE Technical

226

Toward an energy surety future.  

SciTech Connect

Because of the inevitable depletion of fossil fuels and the corresponding release of carbon to the environment, the global energy future is complex. Some of the consequences may be politically and economically disruptive, and expensive to remedy. For the next several centuries, fuel requirements will increase with population, land use, and ecosystem degradation. Current or projected levels of aggregated energy resource use will not sustain civilization as we know it beyond a few more generations. At the same time, issues of energy security, reliability, sustainability, recoverability, and safety need attention. We supply a top-down, qualitative model--the surety model--to balance expenditures of limited resources to assure success while at the same time avoiding catastrophic failure. Looking at U.S. energy challenges from a surety perspective offers new insights on possible strategies for developing solutions to challenges. The energy surety model with its focus on the attributes of security and sustainability could be extrapolated into a global energy system using a more comprehensive energy surety model than that used here. In fact, the success of the energy surety strategy ultimately requires a more global perspective. We use a 200 year time frame for sustainability because extending farther into the future would almost certainly miss the advent and perfection of new technologies or changing needs of society.

Tatro, Marjorie L.; Jones, Scott A.; Covan, John Morgan; Kuswa, Glenn W.; Menicucci, David F.; Robinett, Rush D. III (.; )

2005-10-01T23:59:59.000Z

227

Microgrids and Heterogeneous Security, Quality, Reliability, and Availability  

E-Print Network (OSTI)

and Energy Reliability, Distribution System Integrationand Energy Reliability, Distribution System Integration

Marnay, Chris

2007-01-01T23:59:59.000Z

228

DOE Technical Standards Program Standards Actions Newsletter  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

* * New DOE Standard, Communicating Waste Characterization and DOT Hazard Classification Requirements * Workshops and Events * The Annual Energy Facility Contractors Group Safety Analysis Workshop * 2012 Chemical Safety and Life Cycle Management Workshop * Nuclear Safety- Related Standards Activity INSIDE THIS ISSUE April 2012 Standards Actions Technical Standards Program Newsletter www.hss.energy.gov/nuclearsafety/ns/techstds/ New DOE Standard, Communicating Waste Characterization and DOT Hazard Classification Requirements The Department of Energy (DOE) Office of Environmental Management (EM) has a challenging mission to solve many problems posed by the legacy of the Cold War, including the transportation of unprecedented amounts of contaminated waste,

229

Risk-informed assessment of regulatory and design requirements for future nuclear power plants. Annual report  

Science Conference Proceedings (OSTI)

OAK B188 Risk-informed assessment of regulatory and design requirements for future nuclear power plants. Annual report. The overall goal of this research project is to support innovation in new nuclear power plant designs. This project is examining the implications, for future reactors and future safety regulation, of utilizing a new risk-informed regulatory system as a replacement for the current system. This innovation will be made possible through development of a scientific, highly risk-formed approach for the design and regulation of nuclear power plants. This approach will include the development and/or confirmation of corresponding regulatory requirements and industry standards. The major impediment to long term competitiveness of new nuclear plants in the U.S. is the capital cost component--which may need to be reduced on the order of 35% to 40% for Advanced Light Water Reactors (ALWRS) such as System 80+ and Advanced Boiling Water Reactor (ABWR). The required cost reduction for an ALWR such as AP600 or AP1000 would be expected to be less. Such reductions in capital cost will require a fundamental reevaluation of the industry standards and regulatory bases under which nuclear plants are designed and licensed. Fortunately, there is now an increasing awareness that many of the existing regulatory requirements and industry standards are not significantly contributing to safety and reliability and, therefore, are unnecessarily adding to nuclear plant costs. Not only does this degrade the economic competitiveness of nuclear energy, it results in unnecessary costs to the American electricity consumer. While addressing these concerns, this research project will be coordinated with current efforts of industry and NRC to develop risk-informed, performance-based regulations that affect the operation of the existing nuclear plants; however, this project will go further by focusing on the design of new plants.

NONE

2000-08-01T23:59:59.000Z

230

Standards Actions, July 2002  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Standards Program Document Status 07-01-2002 Activity Summary In Conversion - 4 In Preparation - 46 Out for Comment - 14 Published this Month - 2 5-year Review Status Revision in Progress - 11 Reaffirmation in Progress - 12 Cancellation Pending - 7 Cancellation in Progress - 1 No Current Action - 19 Inside this issue: DOE Technical Standards Projects Initiated 1 DOE Technical Standards Re- cently Sent for Coordination 1 DOE Technical Standards Re- cently Published 1 American National Standards Institute 2 American Society for Testing and Materials International 4 Visit the Technical Standards Program Web Site at http://tis.eh.doe.gov/techstds/. Standards Actions- July 2002 Standards Actions DOE Technical Standards Projects Initiated

231

Standards Actions, May 2001  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

30-2001 30-2001 Activity Summary In Conversion - 4 In Preparation - 39 Out for Comment - 19 Published this Month - 0 5-year Review Status Revision in Progress - 4 Reaffirmation in Progress - 23 Cancellation Pending - 9 Cancellation in Progress - 18 No Current Action - 12 Inside this issue: DOE Technical Standards Projects Initiated 1 DOE Technical Standards Proposed for Reaffirmation 1 Proposed Cancellation of DOE Technical Standards 2 Published DOE Technical Standards 3 American National Standards Institute 3 American National Standards 6 American Society for Testing and Materials 6 Visit the Technical Standards Program Web Site at http://tis.eh.doe.gov/techstds/. May 2001 Standards Actions DOE Technical Standards Projects Initiated

232

May 2005 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Notices 1 DOE Technical Standards Revisions 1 DOE Technical Standards Projects Initiated 1 Non-Government Standards Actions 1 American National Standards Institute (ANSI) 1 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection Association (NFPA) 2 DOE Technical Standards Program Document Status 04-27-2005 Activity Summary In Conversion - 4 In Preparation - 25

233

Reliable Gas Turbine Output: Attaining Temperature Independent Performance  

E-Print Network (OSTI)

Improvements in gas turbine efficiency, coupled with dropping gas prices, has made gas turbines a popular choice of utilities to supply peaking as well as base load power in the form of combined cycle power plants. Today, because of the gas turbine's compactness, low maintenance, and high levels of availability, it is the major option for future power generation. One inherent disadvantage of gas turbines is the degradation of output as the ambient air temperature increases. This reduction in output during times of peak load create a reliability concern as more gas turbines are added to the electric system. A 10% reduction in gas turbine output, when it comprises only 10% of the electric system, does not cause reliability concerns. A 10% reduction in gas turbine output, when it comprises 50% of the electric system, could create reliability and operational problems. This paper explores the potential for maintaining constant, reliable outputs from gas turbines by cooling ambient air temperatures before the air is used in the compressor section of the gas turbine.

Neeley, J. E.; Patton, S.; Holder, F.

1992-04-01T23:59:59.000Z

234

Reliability Challenges for Solar Energy (Presentation)  

DOE Green Energy (OSTI)

Presentation that reviews reliability issues related to various types of photovoltaic tecnnologies, including crystalline silicon, thin films, and concentrating PV.

Kurtz, S.

2009-12-08T23:59:59.000Z

235

Chemical Processing Qualification Standard  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

for Computer Software Used in Nuclear Facilities, ASME PD606 * Root Cause Analysis Fundamentals, ASME PD618 * Risk and Reliability Strategies for Optimizing Performance, ASME...

236

Reliability Considerations from Integration of Smart Grid  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Considerations Considerations from the Integration of Smart Grid 116-390 Village Blvd., Princeton, NJ 08540 609.452.8060 | 609.452.9550 fax www.nerc.com the reliability of the to ensure bulk power system December 2010 (This page intentionally left blank) to ensure the reliability of the bulk power system Reliability Considerations of Integration of Smart Grid i

237

Streamlined Reliability Centered Maintenance Analysis Application Update  

Science Conference Proceedings (OSTI)

A systematic evaluation of plant equipment and maintenance requirements using reliability centered maintenance (RCM) techniques can help hold down operating costs while maintaining plant availability and reliability. This report describes the application of streamlined reliability centered maintenance (streamlined RCM) methodology and software at four utilities.

2001-10-18T23:59:59.000Z

238

Weekly NYMEX Coal Futures  

Reports and Publications (EIA)

The New York Mercantile Exchange (NYMEX) Report provides settlement price data for Central Appalachian (CAPP), Western Powder River Basin (PRB), and Eastern CSX Transportation (CSX) coal futures.

Information Center

239

NETL: Publication Standards Manual  

NLE Websites -- All DOE Office Websites (Extended Search)

Standards Manual Publications Publication Standards Manual Click on the logo to access the NETL Publication Standards Manual 2003 APEX Logo Click on the logo or on the link below...

240

Questioning Copyright in Standards  

E-Print Network (OSTI)

adoption and use of privately drafted industry standards).arising from abuses of standard-setting processes are well-at 7. Compliance with standards has often implicated patent

Samuelson, Pam

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Load as a reliability resource in restructured electricity markets  

Science Conference Proceedings (OSTI)

Recent electricity price spikes demonstrate the value that demand-side responses could bring to a restructured US electricity system. This report considers how even a modest increase in demand elasticity could dramatically reduce these extremes in price volatility. The report provides a three-part assessment addressing the ability of customer's load to participate in competitive markets and the current and potential future role of customer loads as system reliability resources. The study begins by evaluating the extent to which customer loads might be able to provide electricity reliability or ancillary services and reviewing aspects of a large utility's direct load control program. The second phase of the assessment contains a survey of ways in which load has been used as a system reliability resource focusing on programs triggered by system conditions and a real-time price signal. It reviews the experience of: (1) the California ISO's Demand Relief and Participating Load programs; (2) Interruptible load programs in California; (3) the New England ISO's Load Management program; and (4) a ''mature'' program in New Zealand. The third phase of the assessment examines the status of the underlying metering, communication, and control technologies used to effect customer responses. The final section of the report provides a vision of how the future might look and uses it to outline a program of needed R&D to increase the role of customer loads as system reliability resources. Key elements of this research program include: addressing the needs of system operators, making effective use of load management assets, making use of new program design concepts, the design of end-use technologies, and benefiting from program experiences.

Kueck, J.D.; Kirby, B.J.; Eto, J.; Staunton, R.H.; Marnay, C.; Martinez, A.; Goldman, C.

2001-06-01T23:59:59.000Z

242

Adaptive Comfort Model: Simulations & Future Directions  

NLE Websites -- All DOE Office Websites (Extended Search)

Adaptive Comfort Model: Simulations & Future Directions Adaptive Comfort Model: Simulations & Future Directions Speaker(s): Richard de Dear Date: February 4, 2011 - 12:00pm Location: 90-4133 Seminar Host/Point of Contact: Philip Haves The last 20 years of thermal comfort have witnessed a shift away from the "static" approach (exemplified by the PMV/PPD model) towards the adaptive approach (exemplified by the adaptive models in ASHRAE's Standard 55 (2004, 2010) and the European Union's counterpart standard, EN15251 (2007). - the basis and derivation of the adaptive comfort model - adaptive comfort standards (ASHRAE 55 and EN15251) - new developments and directions (reporting back from the January 2011 ASHRAE Meeting of SSPC-55 in Las Vegas) - environmental variables other than dry bulb, in the adaptive model

243

February 2007 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Technical Standards Posted in RevCom for TSP 1 DOE Technical Standards in Reaffirmation 1 DOE Technical Standards Change Notices 1 DOE Technical Standards Published1 Non-Government Standards Actions 2 American National Standards Institute (ANSI) 2 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection Association (NFPA) 2 Publication Staff Roster 2

244

Automated Voltage Standard Ready  

Science Conference Proceedings (OSTI)

... “We wanted a standard that was ... as envisioned, then within our lifetimes there will no longer be a need for voltage transfer standards that have to be ...

2013-04-08T23:59:59.000Z

245

complex dimensional standards  

Science Conference Proceedings (OSTI)

... Mailing Address: National Institute of Standards and Technology 100 Bureau Drive ... of CMS Software: NIST-generated data sets, standard level (per ...

2013-06-27T23:59:59.000Z

246

Surrogate protein particle standards  

Science Conference Proceedings (OSTI)

... The large particles may be useful as a standard for the counting of ... drugs require visual inspection, at present there are no standards available for ...

2013-09-10T23:59:59.000Z

247

Appliance Efficiency Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

Appliance Efficiency Standards Part 1 of 2 In the National Energy Policy Conservation Act (1978), Congress required DOE to set energy-efficiency standards for 13 residential...

248

Cryptographic Standards Statement  

Science Conference Proceedings (OSTI)

... standard. We will continue in our mission to work with the cryptographic community to create the strongest possible encryption standards for the US ...

2013-09-10T23:59:59.000Z

249

Cytomegalovirus Standard Reference Material  

Science Conference Proceedings (OSTI)

... and reagent manufacturers in production of their own calibrants and standards. ... control materials which would be traceable to a NIST standard. ...

2013-03-15T23:59:59.000Z

250

April 2011 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3009 3009 Revision * DOE Standard 1066 Revision * New DOE Standards Projects * Incidents of Security Concern Technical Standard * Explosives Safety * Operations Assessment Field Handbook * Reporting of Radioactive Sealed Sources Program * Occurrence Reporting Causal Analysis Guide * Nuclear Safety-Related Standards Activity INSIDE THIS ISSUE April 2011 Standards Actions Technical Standards Program Newsletter www.hss.energy.gov/nuclearsafety/ns/techstds/ DOE Standard 3009 Revision The Office of Nuclear Safety Policy and Assistance (HS-21), within the Office of Health, Safety and Security (HSS), conducted workshops in January and March to support a major revision of Department of Energy (DOE) Standard 3009, Preparation Guide for U.S. Department of Energy Nonreactor

251

Battery Standard Scenario  

Science Conference Proceedings (OSTI)

Scenario: Fast Tracking a Battery Standard. ... with developing a new standard specifying quality controls for the development of batteries used in ...

252

A Reliable Natural Language Interface  

E-Print Network (OSTI)

As household appliances grow in complexity and sophistication, they become harder and harder to use, particularly because of their tiny display screens and limited keyboards. This paper describes a strategy for building natural language interfaces to appliances that circumvents these problems. Our approach leverages decades of research on planning and natural language interfaces to databases by reducing the appliance problem to the database problem; the reduction provably maintains desirable properties of the database interface. The paper goes on to describe the implementation and evaluation of the EXACT interface to appliances, which is based on this reduction. EXACT maps each English user request to an SQL query, which is transformed to create a PDDL goal, and uses the Blackbox planner [13] to map the planning problem to a sequence of appliance commands that satisfy the original request. Both theoretical arguments and experimental evaluation show that EXACT is highly reliable.

To Household Appliances; Alexander Yates

2003-01-01T23:59:59.000Z

253

External (SON) - Primary Standards Laboratory (PSL) Website  

NLE Websites -- All DOE Office Websites (Extended Search)

Enter keyword below to search the PSL site: Search! The Primary Standards Laboratory (PSL) develops and maintains primary standards traceable to national standards and calibrates and certifies customer reference standards. The PSL provides technical guidance, support, and consultation; develops precision measurement techniques; provides oversight, including technical surveys and measurement audits; and anticipates future measurement needs of the nuclear weapons complex and other Department of Energy programs. The PSL also helps industry, universities, and government agencies establish or verify new capabilities and products and improve measurement technology. NVLAP Accreditation NVLAP Accreditation The Primary Standards Laboratory is accredited over a broad range of parameters by the National Institute of Standards and Technology (NIST) National Voluntary Laboratory Accreditation Program (NVLAP) as a calibration laboratory (Lab Code 105002). This accreditation validates the high level of technical competence achieved by the laboratory and its staff.

254

The Future of LAB  

Science Conference Proceedings (OSTI)

The global linear alkylbenzene (LAB) industry has experienced depressed margins and feedstock shortages during the past few years. The following is an analysis of the industry’s current state and its most likely future. The Future of LAB inform Ma

255

Renewable Electricity Futures (Presentation)  

SciTech Connect

This presentation summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. This presentation was presented in a Wind Powering America webinar on August 15, 2012 and is now available through the Wind Powering America website.

Mai, T.

2012-08-01T23:59:59.000Z

256

Renewable Electricity Futures (Presentation)  

SciTech Connect

This presentation summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. It was presented in a Power Systems Engineering Research Center webinar on September 4, 2012.

Mai, T.

2012-08-01T23:59:59.000Z

257

Renewable Electricity Futures (Presentation)  

SciTech Connect

This presentation library summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. It was presented in an Union of Concerned Scientists webinar on June 12, 2012.

Hand, M.; Mai, T.

2012-08-01T23:59:59.000Z

258

Renewable Electricity Futures (Presentation)  

Science Conference Proceedings (OSTI)

This presentation library summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. It is being presented at the Utility Variable-Generation Integration Group Fall Technical Workshop on October 24, 2012.

Hand, M.

2012-10-01T23:59:59.000Z

259

Renewable Electricity Futures (Presentation)  

Science Conference Proceedings (OSTI)

This presentation library summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. It was presented in a webinar given by the California Energy Commission.

Hand, M. M.

2012-08-01T23:59:59.000Z

260

NIST Global Standards Information Global Standards News  

Science Conference Proceedings (OSTI)

... (EPRI) to help it develop an interim "roadmap" for determining the architecture and initial key standards for an electric power "Smart Grid". ...

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Electrical ship demand modeling for future generation warships  

E-Print Network (OSTI)

The design of future warships will require increased reliance on accurate prediction of electrical demand as the shipboard consumption continues to rise. Current US Navy policy, codified in design standards, dictates methods ...

Sievenpiper, Bartholomew J. (Bartholomew Jay)

2013-01-01T23:59:59.000Z

262

Fermilab | Plan for the Future | Fermilab's Future  

NLE Websites -- All DOE Office Websites (Extended Search)

Fermilab's Future Fermilab's Future 2013-2015 Next Fermilab's research program for 2015 and beyond New facilities at Fermilab, the nation's dedicated particle physics laboratory, would provide thousands of scientists from across the United States and around the world with world-class scientific opportunities. In collaboration with the Department of Energy and the particle physics community, Fermilab is pursuing a strategic plan that addresses fundamental questions about the physical laws that govern matter, energy, space and time. Fermilab is advancing plans for the best facilities in the world for the exploration of neutrinos and rare subatomic processes, far beyond current global capabilities. The proposed construction of a two-megawatt high-intensity proton accelerator, Project X, would enable a comprehensive

263

Status and Future Developments in Large Accelerator Control Systems  

Science Conference Proceedings (OSTI)

Over the years, accelerator control systems have evolved from small hardwired systems to complex computer controlled systems with many types of graphical user interfaces and electronic data processing. Today's control systems often include multiple software layers, hundreds of distributed processors, and hundreds of thousands of lines of code. While it is clear that the next generation of accelerators will require much bigger control systems, they will also need better systems. Advances in technology will be needed to ensure the network bandwidth and CPU power can provide reasonable update rates and support the requisite timing systems. Beyond the scaling problem, next generation systems face additional challenges due to growing cyber security threats and the likelihood that some degree of remote development and operation will be required. With a large number of components, the need for high reliability increases and commercial solutions can play a key role towards this goal. Future control systems will operate more complex machines and need to present a well integrated, interoperable set of tools with a high degree of automation. Consistency of data presentation and exception handling will contribute to efficient operations. From the development perspective, engineers will need to provide integrated data management in the beginning of the project and build adaptive software components around a central data repository. This will make the system maintainable and ensure consistency throughout the inevitable changes during the machine lifetime. Additionally, such a large project will require professional project management and disciplined use of well-defined engineering processes. Distributed project teams will make the use of standards, formal requirements and design and configuration control vital. Success in building the control system of the future may hinge on how well we integrate commercial components and learn from best practices used in other industries.

Karen S. White

2006-10-31T23:59:59.000Z

264

May 2010 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

May 2010 U.S. Department of Energy Technical Standards Program (http://www.hss.energy.gov/nuclearsafety/ns/techstds/) Standards Actions 1.0 DOE STANDARDS ACTIONS The Department of Energy (DOE) Technical Standards Program (TSP) publishes Standards Actions on a monthly basis to provide DOE headquarters and field elements with current information on DOE and select non-government standards activities. The complete list of all DOE Technical Standards projects and their status is available on the TSP web page at: http://www.hss.energy.gov/nuclearsafety/ns/techstds/. To access these standards, go to our web page, click on "DOE Technical Standards," then choose Projects, Approved Standards, Recently Approved Standards, or Drafts for Review, as

265

An Ontology For Standards  

E-Print Network (OSTI)

The paper continues the exploration of standards that the authors initiated in [1] and continued in [2] and [3]. It provides an ontology for standards---a specification of the things and relationships relevant to the topic of standards. The ontology is presented using the ISO standard graphical language, EXPRESS-G. It uses concepts from mathematical logic to clarify the content, meaning, and use of standards. Characteristics and elements of standards that are independent of any particular usage of the standard are defined. The subject matter of standardization is classified and a taxo nomy is presented. Instances of earliest use of each part of the taxonomy are described. The means of establis hing standards is discussed, together with the question of voluntary versus mandatory compliance. The paper closes with a set of conclusions regarding management process standards. The paper concentrates on those aspects of standards of importance to systems engineering, and includes numerous illustrative exa mples.

J. R. Velman; E. R. Widmann

2000-01-01T23:59:59.000Z

266

May 2009 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

May 2009 May 2009 U.S. Department of Energy Technical Standards Program (http://www.hss.energy.gov/nuclearsafety/ns/techstds/) Standards Actions 1.0 DOE STANDARDS ACTIONS The Department of Energy (DOE) Technical Standards Program (TSP) publishes Standards Actions on a monthly basis to provide DOE headquarters and field elements with current information on DOE and select non-government standards activities. The complete list of all DOE Technical Standards projects and their status is available on the TSP web page at: http://www.hss.energy.gov/nuclearsafety/ns/techstds/. To access these standards, go to our web page, click on "DOE Technical Standards," then choose Projects, Approved Standards, Recently Approved Standards, or Drafts for Review, as

267

February 2009 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

February 2009 February 2009 U.S. Department of Energy Technical Standards Program (http://www.hss.energy.gov/nuclearsafety/ns/techstds/) Standards Actions 1.0 DOE STANDARDS ACTIONS The Department of Energy (DOE) Technical Standards Program (TSP) publishes Standards Actions on a monthly basis to provide DOE headquarters and field elements with current information on DOE and select non-government standards activities. The complete list of all DOE Technical Standards projects and their status is available on the TSP web page at: http://www.hss.energy.gov/nuclearsafety/ns/techstds/. To access these standards, go to our web page, click on "DOE Technical Standards," then choose Projects, Approved Standards, Recently Approved Standards, or Drafts for Review, as

268

July 2009 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

July 2009 U.S. Department of Energy Technical Standards Program (http://www.hss.energy.gov/nuclearsafety/ns/techstds/) Standards Actions 1.0 DOE STANDARDS ACTIONS The Department of Energy (DOE) Technical Standards Program (TSP) publishes Standards Actions on a monthly basis to provide DOE headquarters and field elements with current information on DOE and select non-government standards activities. The complete list of all DOE Technical Standards projects and their status is available on the TSP web page at: http://www.hss.energy.gov/nuclearsafety/ns/techstds/. To access these standards, go to our web page, click on "DOE Technical Standards," then choose Projects, Approved Standards, Recently Approved Standards, or Drafts for Review, as

269

Gearbox Reliability Collaborative Phase 3 Gearbox 2 Test Plan  

SciTech Connect

Gearboxes in wind turbines have not been achieving their expected design life even though they commonly meet or exceed the design criteria specified in current design standards. One of the basic premises of the National Renewable Energy Laboratory (NREL) Gearbox Reliability Collaborative (GRC) is that the low gearbox reliability results from the absence of critical elements in the design process or insufficient design tools. Key goals of the GRC are to improve design approaches and analysis tools and to recommend practices and test methods resulting in improved design standards for wind turbine gearboxes that lower the cost of energy (COE) through improved reliability. The GRC uses a combined gearbox testing, modeling and analysis approach, along with a database of information from gearbox failures collected from overhauls and investigation of gearbox condition monitoring techniques to improve wind turbine operations and maintenance practices. Testing of Gearbox 2 (GB2) using the two-speed turbine controller that has been used in prior testing. This test series will investigate non-torque loads, high-speed shaft misalignment, and reproduction of field conditions in the dynamometer. This test series will also include vibration testing using an eddy-current brake on the gearbox's high speed shaft.

Link, H.; Keller, J.; Guo, Y.; McNiff, B.

2013-04-01T23:59:59.000Z

270

Gearbox Reliability Collaborative Phase 3 Gearbox 2 Test Plan  

DOE Green Energy (OSTI)

Gearboxes in wind turbines have not been achieving their expected design life even though they commonly meet or exceed the design criteria specified in current design standards. One of the basic premises of the National Renewable Energy Laboratory (NREL) Gearbox Reliability Collaborative (GRC) is that the low gearbox reliability results from the absence of critical elements in the design process or insufficient design tools. Key goals of the GRC are to improve design approaches and analysis tools and to recommend practices and test methods resulting in improved design standards for wind turbine gearboxes that lower the cost of energy (COE) through improved reliability. The GRC uses a combined gearbox testing, modeling and analysis approach, along with a database of information from gearbox failures collected from overhauls and investigation of gearbox condition monitoring techniques to improve wind turbine operations and maintenance practices. Testing of Gearbox 2 (GB2) using the two-speed turbine controller that has been used in prior testing. This test series will investigate non-torque loads, high-speed shaft misalignment, and reproduction of field conditions in the dynamometer. This test series will also include vibration testing using an eddy-current brake on the gearbox's high speed shaft.

Link, H.; Keller, J.; Guo, Y.; McNiff, B.

2013-04-01T23:59:59.000Z

271

Future Communications Needs | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Future Communications Needs Future Communications Needs Chart of Oncor Electric Delivery's Future Communications Needs Future Communications Needs More Documents & Publications...

272

Market Manual 11: Reliability Compliance Part 11.3: Reliability  

E-Print Network (OSTI)

A catalogue of the information that is to be shared between the IESO and Market Participants in relation to maintaining the reliability of the IESO-controlled grid Public Disclaimer The posting of documents on this Web site is done for the convenience of market participants and other interested visitors to the IESO Web site. Please be advised that, while the IESO attempts to have all posted documents conform to the original, changes can result from the original, including changes resulting from the programs used to format the documents for posting on the Web site as well as from the programs used by the viewer to download and read the documents. The IESO makes no representation or warranty, express or implied, that the documents on this Web site are exact reproductions of the original documents listed. In addition, the documents and information posted on this Web site are subject to change. The IESO may revise, withdraw or make final these materials at any time at its sole discretion without further notice. It is solely your responsibility to ensure that you are using up-to-date documents and information. This document may contain a summary of a particular market rule. Where provided, the summary has

Information Catalogue

2013-01-01T23:59:59.000Z

273

A High Reliability Gas-driven Helium Cryogenic Centrifugal Compressor  

E-Print Network (OSTI)

A helium cryogenic compressor was developed and tested in real conditions in 1996. The achieved objective was to compress 0.018 kg/s Helium at 4 K @ 1000 Pa (10 mbar) up to 3000 Pa (30 mbar). This project was an opportunity to develop and test an interesting new concept in view of future needs. The main features of this new specific technology are described. Particular attention is paid to the gas bearing supported rotor and to the pneumatic driver. Trade off between existing technologies and the present work are presented with special stress on the bearing system and the driver. The advantages are discussed, essentially focused on life time and high reliability without maintenance as well as non pollution characteristic. Practical operational modes are also described together with the experimental performances of the compressor. The article concludes with a brief outlook of future work.

Bonneton, M; Gistau-Baguer, Guy M; Turcat, F; Viennot, P

1998-01-01T23:59:59.000Z

274

Forecasting future economic growth : the term structure of interest rates, volatility and inflation as leading indicators  

E-Print Network (OSTI)

The broad literature documents the empirical regularity that slope of the term structure of interest rates is a reliable predictor of future real economic activity. Steeper slopes presage increasing growth, and downward ...

Khait, Maria

2012-01-01T23:59:59.000Z

275

March 2006 Standards Forum and Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 March 2006 1 March 2006 TSP Manager's Notes 1 New ISO Policy Provides International Solutions to Market Needs 2 Plain Talk for a New Generation 5 The Use of Voluntary Consensus Standards within the Department of Energy 7 Two Change Notices for DOE Standard 1104 8

276

Standards and Certification  

Science Conference Proceedings (OSTI)

... Standards and Certification. Voluntary Voting System Guidelines (VVSG). The Help America Vote Act instructed the Election ...

2013-09-17T23:59:59.000Z

277

FMOC Standards Program  

NLE Websites -- All DOE Office Websites (Extended Search)

spacer Facilities Management and Operations Center (FMOC) Standards Program (removed) Sandia Home...

278

December 2005 Standards Forum  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Page December 2005 Page December 2005 TSP Manager's Notes 1 Overview of the U.S. Standardization System 2 A Call for Greater Collaboration 5 Technical Standards Manager Spotlight 6 Topical Committee Developments 7 Welcome Aboard the TSMC! 8 DOE Standards Actions 9 Non-Government Standards

279

Standards Development Organization Overview  

Science Conference Proceedings (OSTI)

... Standards Organizations NFPA (National Fire Protection Association) ... Fire News – Annual directory – NFPA Buyer's Guide ... Headquarters ...

2010-04-28T23:59:59.000Z

280

February 2013 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 3 Standards Actions Technical Standards Program Newsletter U . S . D E PA R T M E N T O F O ffi ce O f nuclear SaFety ENERGY inSide thiS iSSue * Featured DOE Technical Standards Activities * DOE Technical Standards Cost- Savings and Access Improvement Initiative * Domestic and International Nuclear Energy Voluntary Consensus Standards Needs * Nuclear Safety- Related Standards Activity Featured dOe technical StandardS activitieS DOE Technical Standards Cost-Savings and Access Improvement Initiative By Helen Todosow, Brookhaven National Laboratory The Department of Energy (DOE) Technical Standards Managers (TSM) are actively exploring ways to save the government and tax payers' money while at the same time significantly improving efficiencies in access and use of voluntary consensus

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

FUTURE POWER GRID INITIATIVE Market Design Analysis Tool  

E-Print Network (OSTI)

FUTURE POWER GRID INITIATIVE Market Design Analysis Tool OBJECTIVE Power market design plays a critical role in the outcomes related to power system reliability and market efficiency. However, translation of market rules/designs into the complex mathematical market clearing mechanism is not a trivial

282

Renewable Electricity Futures (Presentation)  

DOE Green Energy (OSTI)

This presentation library summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. It was presented at Wind Powering America States Summit. The Summit, which follows the American Wind Energy Association's (AWEA's) annual WINDPOWER Conference and Exhibition, provides state Wind Working Groups, state energy officials, U.S. Energy Department and national laboratory representatives, and professional and institutional partners an opportunity to review successes, opportunities, and challenges for wind energy and plan future collaboration.

DeMeo, E.

2012-08-01T23:59:59.000Z

283

Future fuels from Montana  

SciTech Connect

To make America less dependent on foreign oil, Montana Governor Brain Schweitzer pushes for investment in synfuel technology. He advocates coal as the 'new fuel' for cars and believes synfuels from coal can bridge the gap between the petroleum economy of the past and the hydrogen economy of the future. He is pushing for a 'Future Fuels' project to form a public-private partnership to build 20 coal conversion, synfuel manufacturing plants. This could contribute to making the USA energy self-sufficient, more quickly than the FutureGen project, he believes.

Buchsbaum, L.

2006-04-15T23:59:59.000Z

284

NETL Publication Standards Manual  

NLE Websites -- All DOE Office Websites (Extended Search)

Standards NETL Publication Standards Manual Publication Standards Manual Click on topic below to view Click "Contents" in the bookmarks panel at the left of your screen to return to this page Introduction * Overview * About This Manual - Point of Contact - Download Files - Permission - Signage - Special Applications Publication Standards * Design Elements * Fact Sheets * Font (Typeface) * Full-Size Brochures * Logo * Presentations * Report Covers NETL Publication Standards Manual Overview For over 60 years, we have been at the forefront

285

2013 Transmission Reliability Program Peer Review - Day 1 Presentations |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 1 Presentations 2013 Transmission Reliability Program Peer Review - Day 1 Presentations The Transmission Reliability Program Peer Review included six sessions over 2 days on June 27 - 28, 2013. Presentations from Day 1 (Sessions I through IV) are available below. Session I: Bharat Bhargava (EPG), Brett Amidan (PNNL), Ken Martin (EPG) Session II: Mark Buckner (ORNL) Session III: Dan Trudnowski (U Montana), Ning Zhou (PNNL) Session IV: Frank Tuffner (PNNL), Bernie Lesieutre (U Wisconsin), Harold Kirkham (PNNL), YC Zhang (NREL) 2013 TR Review - Eastern Interconnection Phase Angle Base Lining Study - Bharat Bhargava, EPG 2013 TR Review - Baselining Studies and Analysis - Brett Amidan, PNNL 2013 TR Review - Synchrophasor Standards Development and Support - Ken Martin, EPG

286

2013 Transmission Reliability Program Peer Review - Day 1 Presentations |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 1 Presentations 2013 Transmission Reliability Program Peer Review - Day 1 Presentations The Transmission Reliability Program Peer Review included six sessions over 2 days on June 27 - 28, 2013. Presentations from Day 1 (Sessions I through IV) are available below. Session I: Bharat Bhargava (EPG), Brett Amidan (PNNL), Ken Martin (EPG) Session II: Mark Buckner (ORNL) Session III: Dan Trudnowski (U Montana), Ning Zhou (PNNL) Session IV: Frank Tuffner (PNNL), Bernie Lesieutre (U Wisconsin), Harold Kirkham (PNNL), YC Zhang (NREL) 2013 TR Review - Eastern Interconnection Phase Angle Base Lining Study - Bharat Bhargava, EPG 2013 TR Review - Baselining Studies and Analysis - Brett Amidan, PNNL 2013 TR Review - Synchrophasor Standards Development and Support - Ken Martin, EPG

287

Program on Technology Innovation: Information Integration for Equipment Reliability at Nuclear Plants  

Science Conference Proceedings (OSTI)

This report investigates the status of information integration for equipment reliability (ER) at nuclear power plants. ER consists of a comprehensive set of processes that span the organization and require extensive data gathering, retrieval, and information integration. To assist nuclear operators, the Institute of Nuclear Power Operations (INPO) issued AP-913, Equipment Reliability Process Description, as a standard approach to implement effective ER processes among its members. Despite the success tha...

2009-04-30T23:59:59.000Z

288

CERTS 2012 Program Review - Automatic Reliability Reports (ARR...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

prototype at MISO: Architecture, Grid Monitoring Visualization and Grid Reliability Tracking Grid Automatic Reliability Report (GARR) Page 1 Automatic Reliability Reports (ARR)...

289

Global Nuclear Energy Partnership Fact Sheet - Establish Reliable...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Establish Reliable Fuel Services Global Nuclear Energy Partnership Fact Sheet - Establish Reliable Fuel Services GNEP would build and strengthen a reliable international fuel...

290

Microgrids and Heterogeneous Security, Quality, Reliability, and Availability  

E-Print Network (OSTI)

quality, reliability, and availability,” IEEE Power & EnergyReliability, and Availability Chris Marnay EnvironmentalQuality, Reliability, and Availability C. Marnay Ernest

Marnay, Chris

2007-01-01T23:59:59.000Z

291

Electricity Delivery and Energy Reliability | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electricity Delivery and Energy Reliability Electricity Delivery and Energy Reliability information about the delivery of electricity and energy reliability Electricity Delivery...

292

Fatigue reliability of wind turbine components  

DOE Green Energy (OSTI)

Fatigue life estimates for wind turbine components can be extremely variable due to both inherently random and uncertain parameters. A structural reliability analysis is used to qualify the probability that the fatigue life will fall short of a selected target. Reliability analysis also produces measures of the relative importance of the various sources of uncertainty and the sensitivity of the reliability to each input parameter. The process of obtaining reliability estimates is briefly outlined. An example fatigue reliability calculation for a blade joint is formulated; reliability estimates, importance factors, and sensitivities are produced. Guidance in selecting distribution functions for the random variables used to model the random and uncertain parameters is also provided. 5 refs., 9 figs., 1 tab.

Veers, P.S.

1990-01-01T23:59:59.000Z

293

Hydrogen & Our Energy Future  

Fuel Cell Technologies Publication and Product Library (EERE)

Hydrogen & Our Energy Future (40 pages) expands on DOE's series of one-page fact sheets to provide an in-depth look at hydrogen and fuel cell technologies. It provides additional information on the sc

294

Future Roles of Milli-, Micro-, and Nano- Grids  

NLE Websites -- All DOE Office Websites (Extended Search)

Future Roles of Milli-, Micro-, and Nano- Grids Future Roles of Milli-, Micro-, and Nano- Grids Title Future Roles of Milli-, Micro-, and Nano- Grids Publication Type Conference Paper Year of Publication 2011 Authors Marnay, Chris, Bruce Nordman, and Judy Lai Conference Name CIGRÉ International Symposium The electric power system of the future - Integrating supergrids and microgrids Date Published 09/2011 Publisher LBNL Conference Location Bologna, Italy Keywords electricity markets and policy group, energy analysis and environmental impacts department Abstract Although it has slowed considerably, consumption of electricity continues to grow in developed economies. Further, there are some unknowns which might accelerate this growth, such as electrification of vehicle fleets and geothermal heat pump space and water heating. Most analysts anticipate that distributed energy resources (DER) will provide a large share of the expanded generation capacity required to meet this seemingly inexorably increasing electricity demand. Further, given the urgency of tackling the climate change problem, most of the added assets must be carbon free renewables or nuclear, end-use efficiency improvements, or highly efficient fossil-fired technologies. In developed economies worldwide, the current power delivery paradigm has been in place for more than a century, i.e. since the emergence of polyphase AC systems around the turn of the last century. A key feature of this structure is that, in principle, universal service is delivered at a consistent level of power quality and reliability (PQR) throughout large regions. This paper describes a future possible structure for the electricity generation and delivery system that leaves the existing high voltage meshed grid paradigm in place, but involves radical reorganization of parts of the distribution network and customer sites. Managing a much more diverse dispersed system poses major challenges to the current centralized grid paradigm, particularly since many of these assets are small to tiny by macrogrid standards and they may ultimately number in the millions. They are also not ones that centralized control can rely upon to function in traditionally dependable ways, e.g. renewable generation can be highly variable and changes in output of generators are not independent. Although most involved in the industry agree that a paradigm shift is both necessary and desirable to manage the new system, the nature of the future system remains quite unclear. In the possible structure described here, the traditional grid, or macrogrid, remains similar at the high voltage meshed level. Three new entities are added more locally: community grids or milligrids that operate a segment of the existing distribution system, microgrids which are akin to current customer sites but which have automonous control, and nanogrids, such as telecom or Ethernet networks that currently distribute power to many low-power devices. The latter exist currently in the local electrical systems but are not typically considered a part of the traditional electricity supply system. Because all these new entities exhibit some localized control, providing appropriate local heterogeneous PQR becomes a possibility. These new grid concepts enable a more "bottom-up" approach to electricity distribution, in contrast to the historic "top-down" model. The future will almost certainly include a mix of the two, but the balance among them and the interface (if any) between them is unclear.

295

Superconducting RF Cavities Past, Present and Future  

E-Print Network (OSTI)

In the last two decades many laboratories around the world, notably Argonne (ANL), TJNAF (formerly CEBAF), CERN, DESY and KEK, decided to develop the technology of superconducting (SC) accelerating cavities. The aim was either to increase the accelerator energy or to save electrical consumption or both. This technology has been used extensively in the operating machines showing good performances and strong reliability. At present, the technology using bulk niobium (Nb) or Nb coated on copper (Cu) is mature enough to be applied for many different applications, such as synchrotron light sources and spallation neutron drivers. Results, R&D work and future projects will be presented with emphasis on application to linear accelerators.

Chiaveri, Enrico

2003-01-01T23:59:59.000Z

296

Renewable Electricity Futures (Presentation)  

Science Conference Proceedings (OSTI)

This presentation library summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. It was presented to the 2012 Western Conference of Public Service Commissioners, during their June, 2012, meeting. The Western Conference of Public Service Commissioners is a regional association within the National Association of Regulatory Utility Commissioners (NARUC).

Hand, M. M.

2012-08-01T23:59:59.000Z

297

August 2001 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7-31-2001 7-31-2001 Activity Summary In Conversion-4 In Preparation-43 Out for Comment-17 Published this Month-0 5-year Review Status Revision in Progress-6 Reaffirmation in Progress-23 Cancellation Pending-4 Cancellation in Progress-12 Proposed for Cancellation-13 No Current Action-11 Inside this issue: DOE Technical Standards Project Initiated 1 DOE Technical Standards Recently Sent for Coordination 1 DOE Technical Standard Recently Reaffirmed 1 DOE Technical Standards Recently Published 2 American National Standards Institute 2 American National Standards 4 American Society for Testing and Materials 5 Visit the Technical Standards Program Web Site at http://tis.eh.doe.gov/techstds/. Standards Actions- August 2001 Standards

298

November 2000 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 2000 November 2000 Standards Technical Standards Program Document Status Visit the Technical Standards Program Web Site: http://tis.eh.doe.gov/techstds/ DOE Technical Standards Projects Initiated If you have any questions or are interested in participating in the development of these standards, please contact the representatives listed below. Complete listings of all DOE Technical Standards projects and their status are given on the Technical Standards Pro- gram (TSP) Web Site referenced at the bottom of this page. To access these lists from the home page, click on “DOE Technical Standards,” then click on “Projects” in the left- hand frame to show the links to the project lists. The following DOE Technical Standards projects were recently initiated: • Radiological Control Programs for Special Tritium Compounds, Project Number OCSH-

299

CONVERSION OF DOE TECHNICAL STANDARDS TO NON-GOVERNMENT STANDARDS...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CONVERSION OF DOE TECHNICAL STANDARDS TO NON-GOVERNMENT STANDARDS CONVERSION OF DOE TECHNICAL STANDARDS TO NON-GOVERNMENT STANDARDS Purpose This procedure provides guidance on the...

300

Using Travel Time Reliability Measures to Improve Regional Transportation Planning and URS Corporation  

E-Print Network (OSTI)

, connectivity, and safety to evaluate the transportation system's health and determine where future investmentsUsing Travel Time Reliability Measures to Improve Regional Transportation Planning and Operations of the Transportation Research Board January 13­17, 2008 Revised November 3, 2007 TRB 2008 Annual Meeting CD-ROM Paper

Bertini, Robert L.

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Reviewing progress in PJM's capacity market structure via the new reliability pricing model  

Science Conference Proceedings (OSTI)

The Reliability Pricing Model introduces significant changes to the capacity market structure of PJM. The main feature of the RPM design is a downward-sloping demand curve, which replaces the highly volatile vertical demand curve. The authors review the latest RPM structure, results of the auctions, and the future course of the implementation process. (author)

Sener, Adil Caner; Kimball, Stefan

2007-12-15T23:59:59.000Z

302

TVA Tracks Bulk Power Transfers with TagNet to Improve Transmission System Reliability  

Science Conference Proceedings (OSTI)

The bubble diagram is especially useful. In the world of real-time operations, a picture is worth a thousand words. TagNet provides TVA with The ability to identify root causes for real-time system behavior Data for future reliability models for approximation of transfer biases A mechanism to monitor system conditions using a graphical toolset. 8212Armando Rodriguez, TVA.

2006-02-15T23:59:59.000Z

303

Office of Electricity Delivery and Energy Reliability  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Comments of Cisco Systems to Office of Electricity Delivery and Energy Reliability Department of Energy in Response to Request for Information: Addressing Policy and Logistical...

304

Definition: Transmission Reliability | Open Energy Information  

Open Energy Info (EERE)

to ensure reliable system operation as system conditions change.1 Related Terms transmission lines, transfer capability, system, transmission line References Glossary...

305

Real Time Grid Reliability Management 2005  

NLE Websites -- All DOE Office Websites (Extended Search)

period, the traditional approach to reliability management - construction of new transmission lines - has not been pursued due to unresolved issues related to the...

306

Information Concerning Reliability Impacts under Various System...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Impacts under Various System Configurations of the Mirant Potomac River Plant Information Concerning Reliability Impacts under Various System Configurations of the Mirant...

307

design and reliability of solder interconnections  

Science Conference Proceedings (OSTI)

X. Wu, K. Hu, X. Dou, G. Mui, C.-P. Yeh and K. Wyatt. Combined ... Reliability Considerations When Choosing Water Soluble Flux for Electronic Assembly [pp.

308

Mechanical Reliability Study on Porous Brittle Materials  

Science Conference Proceedings (OSTI)

Presentation Title, Mechanical Reliability Study on Porous Brittle Materials. Author(s), Xiaofeng Fan, Eldon D Case, Fei Ren, Yutian Shu, Melissa J Baumann .

309

Improving Wind Turbine Gearbox Reliability: Preprint  

DOE Green Energy (OSTI)

This paper describes a new research and development initiative to improve gearbox reliability in wind turbines begun at the National Renewable Energy Laboratory (NREL) in Golden, Colorado, USA.

Musial, W.; Butterfield, S.; McNiff, B.

2007-06-01T23:59:59.000Z

310

CMOS Reliability and Advanced Devices Group  

Science Conference Proceedings (OSTI)

... electron devices for the electronics industry by ... reliability issues in emerging electronic devices. ... Power Device and Thermal Metrology—The Power ...

2013-04-26T23:59:59.000Z

311

Reliability evaluation of smart distribution grids.  

E-Print Network (OSTI)

??The term "Smart Grid" generally refers to a power grid equipped with the advanced technologies dedicated for purposes such as reliability improvement, ease of control… (more)

Kazemi, Shahram

2011-01-01T23:59:59.000Z

312

Nucleic Acid Standards - Standard Ref. Frame  

NLE Websites -- All DOE Office Websites (Extended Search)

Standard Reference Standard Reference Standard Reference Frame Supplemental Information Ideal Geometries X-PLOR Parameters Valence Geometries RNA Ontology Consortium mmCIF Resources PDBML Resources A Standard Reference Frame for the Description of Nucleic Acid Base-pair Geometry A common point of reference is needed to describe the three-dimensional arrangements of bases and base pairs in nucleic acid structures. [1]. For example, parts of a structure, which appear "normal" according to one computational scheme, may be highly unusual according to another and vice versa. It is thus difficult to carry out comprehensive comparisons of nucleic acid structures and to pinpoint unique conformational features in individual structures. In order to resolve these issues, a group of

313

Standards Actions, February 2004  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 1 DOE Technical Standards Recently Sent for Coordination 1 DOE Technical Standards Recently Published 1 Non-Government Standards 2 American National Standards Institute (ANSI) 2 American Society of Mechanical Engineers (ASME) 5 American Society for Testing and Materials (ASTM) 6 American Nuclear Society (ANS) 11 National Fire Protection Association (NFPA) 12 DOE Technical Standards Program Document Status 01-23-2004 Activity Summary In Conversion - 4 In Preparation - 36 Out for Comment - 23 Published in January - 3 5-year Review Status Revision in Progress - 13 Reaffirmation in Progress - 26 Cancellation Pending - 1 Cancellation in Progress - 3 No Current Action - 0 Inside This Visit the Technical Standards Program

314

July 2005 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Technical Standards in Reaffirmation 1 DOE Technical Standards Change Notices 1 DOE Technical Standards Recently Published 1 Non-Government Standards Actions 2 American National Standards Institute (ANSI) 2 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection Association (NFPA) 2 DOE Technical Standards Program Document Status 06-28-2005 Activity Summary In Conversion - 4 In Preparation - 21 Out for Comment - 10 Published in June - 2 5-year Review Status Proposed for Revision-6 Revision in Progress-3

315

DIVA: A Reliable Substrate for Deep Submicron Microarchitecture Design  

E-Print Network (OSTI)

Building a high-petformance microprocessor presents many reliability challenges. Designers must verify the correctness of large complex systems and construct implementations that work reliably in varied (and occasionally adverse) operating conditions. To&rther complicate this task, deep submicron fabrication technologies present new reliability challenges in the form of degraded signal quality and logic failures caused by natural radiation interference. In this paper; we introduce dynamic verification, a novel microarchitectural technique that can significantly reduce the burden of correctness in microprocessor designs. The approach works by augmenting the commit phase of the processor pipeline with a functional checker unit. Thefunctional checker verifies the correctness of the core processor’s computation, only permitting correct results to commit. Overall design cost can be dramatically reduced because designers need only veri ’ the correctness of the checker unit. We detail the DIVA checker architecture, a design optimized for simplicity and low cost. Using detailed timing simulation, we show that even resource-frugal DIVA checkers have little impact on core processor peflormance. To make the case for reduced verification costs, we argue that the DIVA checker should lend itself to functional and electrical verification better than a complex core processor Finally, future applications that leverage dynamic veri@cation to increase processor performance and availability are suggested. 1

Todd M. Austin

1999-01-01T23:59:59.000Z

316

Draft Program June 29, 2012 International Conference on Biofuels Standards  

E-Print Network (OSTI)

Draft Program June 29, 2012 4th International Conference on Biofuels Standards: Current Issues, Future Trends Surface Transport Biofuels - Current State of Technology, Production and Markets for: Bioethanol (from Corn, Sugarcane, Cellulose) Biodiesel Other biofuels ­ Biobutanol, Biomethanol, Biomethane

317

USING STANDARD SYSTE  

Science Conference Proceedings (OSTI)

... L. Hyperfine structure 418 M. Fine structure 418 N. Molar gas constant R ... C. Outlook and suggestions for future work 463 Acknowledgments 466 ...

2011-06-08T23:59:59.000Z

318

Standards Information and Resources  

Science Conference Proceedings (OSTI)

... in future releases, one key source of input ... from a wide variety of sources, including recommendations ... which NIST is given "primary responsibility to ...

2013-05-20T23:59:59.000Z

319

Reliability Results of NERSC Systems  

SciTech Connect

In order to address the needs of future scientific applications for storing and accessing large amounts of data in an efficient way, one needs to understand the limitations of current technologies and how they may cause systeminstability or unavailability. A number of factors can impact system availability ranging from facility-wide power outage to a single point of failure such as network switches or global file systems. In addition, individual component failure in a system can degrade the performance of that system. This paper focuses on analyzing both of these factors and their impacts on the computational and storage systems at NERSC. Component failure data presented in this report primarily focuses on disk drive in on of the computational system and tape drive failure in HPSS. NERSC collected available component failure data and system-wide outages for its computational and storage systems over a six-year period and made them available to the HPC community through the Petascale Data Storage Institute.

Petascale Data Storage Institute (PDSI); Mokhtarani, Akbar; Mokhtarani, Akbar; Kramer, William; Hick, Jason

2008-05-27T23:59:59.000Z

320

February 2005 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technical Technical Standards Program Document Status 1-18-2005 Activity Summary In Conversion - 4 In Preparation - 25 Out for Comment - 10 Published in January - 3 5-year Review Status Proposed for Revision-6 Revision in Progress-4 Proposed for Reaffirmation-3 Reaffirmation in Progress-21 Cancellation Pending-16 Cancellation in Progress-0 Visit the Technical Standards Program Web Site at http://tis.eh.doe.gov/techstds/ February 2005 Standards Actions 1.0 DOE Standards Actions The complete list of all DOE Technical Standards projects and their status is available on the Technical Standards Program (TSP) web page at http://tis.eh.doe.gov/techstds/. To access these standards, go to our web page, click on "DOE Technical Standards," then choose Projects,

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

July 2006 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Technical DOE Technical Standards Program Document Status 06-28-2006 Activity Summary In Conversion - 4 In Preparation - 23 Out for Comment - 14 Published in June - 0 5-year Review Status Proposed for Revision-5 Revision in Progress-6 Proposed for Reaffirmation-1 Reaffirmation in Progress-21 Cancellation Pending-9 Cancellation in Progress-0 Inside This Issue Visit the Technical Standards Program Web Site at http://www.eh.doe.gov/ techstds/ July 2006 Standards Actions 1.0 DOE Standards Actions The complete list of all DOE Technical Standards projects and their status is available on the Technical Standards Program (TSP) web page at http://www.eh.doe.gov/techstds/. To access these standards, go to our web page, click on "DOE Technical Standards," then choose Projects,

322

January 2012 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

* DOE Conduct of Operations Standards Revisions * New DOE Standards Projects * DOE Handbook of Operational Safety and Analysis Techniques * Nuclear Safety- Related Standards Activity INSIDE THIS ISSUE January 2012 Standards Actions Technical Standards Program Newsletter www.hss.energy.gov/nuclearsafety/ns/techstds/ DOE Conduct of Operations Standards Revisions In the early 1990s, the Department of Energy (DOE) developed 17 technical standards to support DOE Order 5480.19, Conduct of Operations Requirements for DOE Facilities. The standards (STDs), listed below, provided examples, good practices, and expanded explanations of the topics in each chapter of the Order. In June 2010, the Order was revised and issued as DOE Order 422.1, Conduct of Operations. The

323

Standard Seawater Comparisons Updated  

Science Conference Proceedings (OSTI)

Salinity adjustments that may reconcile differences in results from different expeditions are presented. These corrections are based upon batch-to-batch differences in Standard Seawater (SSW) after comparison with KC1-derived standards.

Arnold W. Mantyla

1987-04-01T23:59:59.000Z

324

Standards Actions, July 2001  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6-27-2001 6-27-2001 Activity Summary In Conversion - 4 In Preparation - 42 Out for Comment - 15 Published this Month - 1 5-year Review Status Revision in Progress - 4 Reaffirmation in Progress - 2 Supersedure in Progress - 6 Cancellation Pending - 8 Cancellation in Progress - 2 No Current Action - 35 Inside this issue: DOE Technical Standards Project Initiated 1 DOE Technical Standard Recently Sent for Coordination 1 DOE Technical Standard Recently Published 1 American National Standards Institute 2 American National Standards 3 American Society for Testing and Materials 4 Visit the Technical Standards Program Web Site at http://tis.eh.doe.gov/techstds/. July 2001 Standards Actions DOE Technical Standards Projects Initiated

325

Standards Actions - April 2002  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3-28-2002 3-28-2002 Activity Summary In Conversion - 4 In Preparation - 44 Out for Comment - 13 Published this Month - 2 5-year Review Status Revision in Progress - 4 Reaffirmation in Progress - 2 Supersedure in Progress - 6 Cancellation Pending - 8 Cancellation in Progress - 2 No Current Action - 35 Inside this issue: DOE Technical Standards Project Canceled 1 DOE Technical Standard Recently Sent for Coordination 1 DOE Technical Standards Re- cently Published 2 American National Standards Institute 2 American Society for Testing and Materials International 4 Visit the Technical Standards Program Web Site at http://tis.eh.doe.gov/techstds/. Standards Actions- April 2002 Standards Actions DOE Technical Standards Project Canceled

326

Standard Model Summary  

NLE Websites -- All DOE Office Websites (Extended Search)

resumen del Modelo Standard Avanzar Volver Principal ESTOY PERDIDO Lo que hace que el Modelo Standard sea tan amplio es el hecho que todas las partculas observadas pueden ser...

327

AOCS: supporting international standards  

Science Conference Proceedings (OSTI)

Trade standards improve efficiency of production and ease international commerce. They can also affect profitability. AOCS: supporting international standards inform Magazine algae algal AOCS biomass business chemistry cottonseed date detergents f

328

Standard Reference Data  

Science Conference Proceedings (OSTI)

... The National Standard Reference Data System (NSRDS-NBS) provides access to the quantitative data of physical sciences, critically evaluated ...

2013-09-19T23:59:59.000Z

329

Law Enforcement Standards Office  

Science Conference Proceedings (OSTI)

... Talking Police OLES supports the SAFECOM and COPS programs through standards leadership. News. Expanded CSI Guide Now Available. ...

2013-09-20T23:59:59.000Z

330

November 2006 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Notices 1 DOE Technical Standards Published 1 Non-Government Standards Actions 2 American National Standards Institute (ANSI) 2 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection Association (NFPA) 2 Publication Staff Roster 2 DOE Technical Standards Program Document Status 10-25-2006 Activity Summary In Conversion - 4 In Preparation - 23 Out for Comment - 16 Published in September - 0 5-year Review Status Proposed for Revision-5 Revision in Progress-6

331

Appendix: Industry Standards  

Science Conference Proceedings (OSTI)

Table 13   Commonly used standards and references for downstream (refining) materials...Practices for the Control

332

Related Metrology Standards  

Science Conference Proceedings (OSTI)

... Dynamic measurement -- Proving systems for volumetric meters -- Part 2: Pipe provers. ... Manual of Petroleum Measurement Standards. Contact. ...

2011-10-03T23:59:59.000Z

333

Appliance Efficiency Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

Appliance Efficiency Standards and Price Discrimination C. Anna Spurlock Energy Analysis & Environmental Impact Department Environmental Energy Technologies Division Lawrence...

334

NREL: Gearbox Reliability Collaborative - Working with the Gearbox...  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Deployment Energy Systems Integration Gearbox Reliability Collaborative Wind Research Wind Gearbox Reliability Collaborative Search More Search Options Site Map...

335

Exploratory Reliability and Performance R&D  

DOE Green Energy (OSTI)

This paper presents a brief overview of the status and accomplishments during fiscal year (FY) 2005 of the Photovoltaic (PV) Exploratory Reliability and Performance R&D Subtask, which is part of the PV Module Reliability R&D Project (a joint NREL-Sandia project).

Osterwald, C. R.

2005-11-01T23:59:59.000Z

336

Reliability mathematics analysis on traction substation operation  

Science Conference Proceedings (OSTI)

In electrified railway traction power supply systems, the operational qualities and reliabilities of the main traction transformer loop is higher, but ones of bus output units is comparatively low. The traction transformer loop still works when output ... Keywords: Erlang distribution, Markov theory, life, reliability, traction substation, transformer

Hongsheng Su

2008-11-01T23:59:59.000Z

337

Engineering Reliability into Web Sites: Google SRE  

E-Print Network (OSTI)

Engineering Reliability into Web Sites: Google SRE Alex Perry alex.perry@google.com Santa Monica SRE, Google #12;Abstract This talk introduces Site Reliability Engineering (SRE) at Google, explaining, Santa Monica, Dublin and Kirkland manage Google's many services and websites. They draw upon the Linux

Cortes, Corinna

338

Exact bounds for average pairwise network reliability  

Science Conference Proceedings (OSTI)

Several methods for finding exact bounds of average pairwise network connectivity (APNC) are proposed. These methods allows faster decision making about if a network is reliable for its purpose. Previous results on cumulitive updating of all-terminal ... Keywords: algorithm, network reliability, pairwise connectivity

Alexey Rodionov; Olga Rodionova

2013-01-01T23:59:59.000Z

339

NREL's Gearbox Reliability Collaborative leads to wind turbine gearbox reliability, lowering the cost of energy.  

E-Print Network (OSTI)

NREL's Gearbox Reliability Collaborative leads to wind turbine gearbox reliability, lowering have been able to identify shortcomings in the design, testing, and operation of wind turbines findings are quickly shared among GRC participants, including many wind turbine manufacturers and equipment

340

Reliable Thermodynamic Descriptions for Multicomponent Systems  

Science Conference Proceedings (OSTI)

Materials Genomics Past & Future: From CALPHAD to Flight · Microstructure Stability of Multi-Materials Systems with Adaptive Microstructures · Modeling of ...

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Radiological Control Technician: Standardized technician Qualification Standard  

Science Conference Proceedings (OSTI)

The Qualification Standard states and defines the knowledge and skill requirements necessary for successful completion of the Radiological Control Technician Training Program. The standard is divided into three phases: Phase I concerns RCT Academic training. There are 13 lessons associated with the core academics program and 19 lessons associated with the site academics program. The staff member should sign the appropriate blocks upon successful completion of the examination for that lesson or group of lessons. In addition, facility specific lesson plans may be added to meet the knowledge requirements in the Job Performance Measures (JPM) of the practical program. Phase II concerns RCT core/site practical (JPMs) training. There are thirteen generic tasks associated with the core practical program. Both the trainer/evaluator and student should sign the appropriate block upon successful completion of the JPM. In addition, facility specific tasks may be added or generic tasks deleted based on the results of the facility job evaluation. Phase III concerns the oral examination board successful completion of the oral examination board is documented by the signature of the chairperson of the board. Upon completion of all of the standardized technician qualification requirements, final qualification is verified by the student and the manager of the Radiological Control Department and acknowledged by signatures on the qualification standard. The completed Qualification Standard shall be maintained as an official training record.

Not Available

1992-10-01T23:59:59.000Z

342

Study of federal microwave standards  

DOE Green Energy (OSTI)

Present and future federal regulatory processes which may impact the permissible levels of microwave radiation emitted by the SPS Microwave Power Transmission (MPTS) were studied. An historical development of US occupational and public microwave standards includes an overview of Western and East European philosophies of environmental protection and neurophysiology which have led to the current widely differing maximum permissible exposure limits to microwaves. The possible convergence of microwave standards is characterized by a lowering of Western exposure levels while Eastern countries consider standard relaxation. A trend toward stricter controls on activities perceived as harmful to public health is under way as is interest in improving the federal regulatory process. Particularly relevant to SPS is the initiation of long-term, low-level microwave exposure programs. Coupled with new developments in instrumentation and dosimetry, the results from chronic exposure program and population exposure studies could be expected within the next five to ten years. Also discussed is the increasing public concern that rf energy is yet another hazardous environmental agent.

David, L.

1980-08-01T23:59:59.000Z

343

Information Concerning Reliability Impacts under Various System  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Information Concerning Reliability Impacts under Various System Information Concerning Reliability Impacts under Various System Configurations of the Mirant Potomac River Plant Information Concerning Reliability Impacts under Various System Configurations of the Mirant Potomac River Plant Docket No. EO-05-01: PJM Interconnection, L.L.C. and PEPCO Holdings, Inc. is hereby providing you with additional information concerning reliability impacts under various system conditions associated with the unavailability of the Potomac River Generating Station to serve load in the D.C. area. Also enclosed as part of this submittal is material provided by PEPCO (balance of sentence redacted) In addition, there is a discussion concerning the impacts of demand side response in addressing this situation. Information Concerning Reliability Impacts under Various System

344

Reliability First Corporation | OpenEI  

Open Energy Info (EERE)

Reliability First Corporation Reliability First Corporation Dataset Summary Description This dataset comes from the Energy Information Administration (EIA), and is part of the 2011 Annual Energy Outlook Report (AEO2011). This dataset is table 110, and contains only the reference case. The dataset uses gigawatts, billion kilowatthours and quadrillion Btu. The data is broken down into generating capacity, electricity generation and energy consumption. Source EIA Date Released April 26th, 2011 (3 years ago) Date Updated Unknown Keywords 2011 AEO EIA Gateway Reliability First Corporation SERC Reliability Corporation Data application/vnd.ms-excel icon AEO2011:Renewable Energy Generation by Fuel - SERC Reliability Corporation / Gateway- Reference Case (xls, 118.9 KiB) Quality Metrics Level of Review Peer Reviewed

345

April 2004 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 1 DOE Technical Standards recently sent for coordination 1 DOE Technical Standards Recently Published 1 Non-Government Standards 2 American National Standards Institute (ANSI) 2 American Society of Mechanical Engineers (ASME) 7 American Society for Testing and Materials (ASTM) 8 American Nuclear Society (ANS) 12 National Fire Protection Association 12 ry DOE Technical Standards Program Document Status 03-26-2004 Activity Summary In Conversion - 4 In Preparation - 37 Out for Comment - 21 Published in March - 2 5-Year Review Status Revision in Progress - 13 Reaffirmation inProgress - 26 Cancellation Pending - 1

346

Renewable Electricity Futures (Presentation)  

SciTech Connect

This presentation library summarizes findings of NREL's Renewable Electricity Futures study, published in June 2012. RE Futures investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. It was presented at the 2012 RE AMP Annual Meeting. RE-AMP is an active network of 144 nonprofits and foundations across eight Midwestern states working on climate change and energy policy with the goal of reducing global warming pollution economy-wide 80% by 2050.

Mai, T.

2012-08-01T23:59:59.000Z

347

IM Future | Open Energy Information  

Open Energy Info (EERE)

IM Future Jump to: navigation, search Name IM Future Place Spain Sector Services, Wind energy Product Spain-based firm that provides operation and maintenance services for wind...

348

Status and future - Springer  

Science Conference Proceedings (OSTI)

If the Higgs boson is found in the few hundred GeV region, then the photon collider is an ideal place to measure its properties in order to confirm the standard ...

349

Standards Actions, May 2002  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4-29-2002 4-29-2002 Activity Summary In Conversion - 4 In Preparation - 47 Out for Comment - 12 Published this Month - 6 5-year Review Status Revision in Progress - 10 Reaffirmation in Progress - 12 Supersedure in Progress - 0 Cancellation Pending - 7 Cancellation in Progress - 1 No Current Action - 20 Inside this issue: DOE Technical Standards Proposed for Reaffirmation 1 DOE Technical Standards Re- cently Published 1 American National Standards Institute 2 American Society for Testing and Materials International 4 Visit the Technical Standards Program Web Site at http://tis.eh.doe.gov/techstds/. Standards Actions- May 2002 Standards Actions DOE Technical Standards Proposed for Reaffirmation The following documents are currently being reevaluated under the 5-year

350

May 2008 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4-25-2008 4-25-2008 Activity Summary In Conversion - 4 In Preparation - 24 Out for Comment - 26 Published in April - 2 Five Year Review status Proposed for Revision-4 Revision in Progress-3 Proposed for Reaffirmation-0 Reaffirmation in Progress-20 Cancellations Pending-6 Cancellations in Progress-0 Inside This Issue Visit the Technical Standards Program Web Site at http://www.hss.energy.gov/nuclear safety/techstds/ May 2008 Standards Actions 1.0 DOE Standards Actions The complete list of all DOE Technical Standards projects and their status is available on the Technical Standards Program (TSP) web page at http://hss.energy.gov/nuclear safetytechstds/. To access these standards, go to our web page, click on "DOE Technical Standards," then choose

351

Standards Actions - August 2000  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Standards Standards Technical Standards Program Document Status (2000-07-31) (2000-07-31) (2000-07-31) (2000-07-31) (2000-07-31) Activity Summary In Conversion – 4 In Preparation – 32 Out for Comment – 15 Published this Month – 1 5-year Reviews Revisions in Progress – 3 Reaffirmations in Progress – 0 Supersedures in Progress – 6 Cancellations Pending – 8 Cancellations in Progress – 2 No Current Action – 35 Visit the Technical Standards Program Web Site: http://tis.eh.doe.gov/techstds/ DOE Technical Standards Project Initiated If you have any questions or are interested in participating in the development of this standard, please contact the person listed below. Complete listings of all DOE Technical Standards projects and their status are given in the Web Site referenced at the bottom of this page. To access these

352

Standards Actions - August 2000  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Standards Standards Technical Standards Program Document Status (2000-07-31) (2000-07-31) (2000-07-31) (2000-07-31) (2000-07-31) Activity Summary In Conversion – 4 In Preparation – 32 Out for Comment – 15 Published this Month – 1 5-year Reviews Revisions in Progress – 3 Reaffirmations in Progress – 0 Supersedures in Progress – 6 Cancellations Pending – 8 Cancellations in Progress – 2 No Current Action – 35 Visit the Technical Standards Program Web Site: http://tis.eh.doe.gov/techstds/ DOE Technical Standards Project Initiated If you have any questions or are interested in participating in the development of this standard, please contact the person listed below. Complete listings of all DOE Technical Standards projects and their status are given in the Web Site referenced at the bottom of this page. To access these

353

April 2008 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3-27-2008 3-27-2008 Activity Summary In Conversion - 4 In Preparation - 24 Out for Comment - 26 Published in March - 0 Five Year Review status Proposed for Revision-4 Revision in Progress-3 Proposed for Reaffirmation-0 Reaffirmation in Progress-20 Cancellations Pending-6 Cancellations in Progress-0 Inside This Issue Visit the Technical Standards Program Web Site at http://www.hss.energy.gov/nuclear safety/techstds/ April 2008 Standards Actions 1.0 DOE Standards Actions The complete list of all DOE Technical Standards projects and their status is available on the Technical Standards Program (TSP) web page at http://hss.energy.gov/nuclear safetytechstds/. To access these standards, go to our web page, click on "DOE Technical Standards," then choose

354

Appliance Efficiency Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

6 6 Appliance Efficiency Standards Part 2 of 2: Policy process and consumer gains Part 1 of this article (CBS News, Spring 1995) discussed LBNL's role in setting federal appliance efficiency standards and presented an overview of the net national benefits of standards. Here, we examine the broader policy context for appliance standards and consumer benefits. Policy Context Appliance efficiency standards provide a minimum requirement for energy efficiency at the point of manufacture (or import). These standards seek to overcome market failures-including price distortions and transaction costs-that have historically given rise to a gap between observed and attainable product efficiencies. In this way, appliance standards complement information programs, utility DSM and other incentive programs,

355

July 2007 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6-27-2007 6-27-2007 Activity Summary In Conversion - 4 In Preparation - 27 Out for Comment - 24 Published in June - 0 5-year Review status Proposed for Revision-5 Revision in Progress-6 Proposed forReaffirmation-1 Reaffirmation in Progress-21 Cancellations Pending-9 Cancellations in Progress-0 Inside This Issue Visit the Technical Standards Program Web Site at http://hss.energy.gov/nuclear safetytechstds/ July 2007 Standards Actions 1.0 DOE Standards Actions The complete list of all DOE Technical Standards projects and their status is available on the Technical Standards Program (TSP) web page at http://hss.energy.gov/nuclear safetytechstds/. To access these standards, go to our web page, click on "DOE Technical Standards," then choose

356

IHS Standards Expert  

NLE Websites -- All DOE Office Websites (Extended Search)

Standards » Standards » IHS IHS Standards Expert1354608000000IHS Standards ExpertLANL researchers can access IHS Standards from offsite via Remote Access./No/Question? 667-5809library@lanl.gov IHS Standards Expert LANL researchers can access IHS Standards from offsite via Remote Access. Login For each collection (society), one person may access pdfs at a time, per the Library's subscription license. Please free up the collection for another user when finished: download or print your pdf, then Log Out. FAQs How do I use IHS? IHS Basic Tutorial (pdf) - see more on the "Training & Support" tab within IHS Contact IHS Customer support, 800-447-3352 (our Customer Support ID Number is 5926584) Contact the Research Library at 7-5809 or library@lanl.gov What if full-text is not available?

357

OSHA: Standards and Recordkeeping  

NLE Websites -- All DOE Office Websites (Extended Search)

OSHA: Standards & OSHA: Standards & Record keeping Frances E. Humphrey, CRNP, COHN-5/CM DOE Headquarters January 17, 2002 .. DOL Organizational Chart History of OSHA +11/14n8: Lead Standard Published * 5/23/80: Medical & Exposure Records Standard Finalized * 7/2/82: Voluntary Protection Programs (VPP) Created +11/25/83: HazCom Standard Promulgated * 9/1/89: Lockout/Tagout Standard Issued OSHA Mission Statement * "The mission of the Occupational Safety and Health Administration is to save lives, prevent injuries and protect the health of America's workers" {OSHA, 2001) History of OSHA +12/29nO: President Nixon signed Occupational Safety and Health Act of 1970 * 5129n1: First Standards Adopted * 1/17n2: OSHA Training Institute Established * Nov-Dec 1972: First State Plans Approved

358

Derived Concentration Technical Standard  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

196-2011 196-2011 April 2011 DOE STANDARD DERIVED CONCENTRATION TECHNICAL STANDARD U.S. Department of Energy AREA ENVR Washington, D.C. 20585 Not Measurement Sensitive This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.doe.gov/nuclearsafety/ns/techstds/standard/standard.html DOE-STD-1196-2011 ACKNOWLEDGEMENTS This Derived Concentration Technical Standard was a collaborative effort sponsored by the DOE Office of Environmental Policy and Assistance, with support from Department subject matter experts (SMEs) in the field of radiation protection. This standard, which complements DOE Order (O) 458.1, Radiation Protection of the Public and the Environment, was developed taking

359

Estimation of structural reliability under combined loads. [PWR; BWR  

DOE Green Energy (OSTI)

For the overall safety evaluation of seismic category I structures subjected to various load combinations, a quantitative measure of the structural reliability in terms of a limit state probability can be conveniently used. For this purpose, the reliability analysis method for dynamic loads, which has recently been developed by the authors, was combined with the existing standard reliability analysis procedure for static and quasi-static loads. The significant parameters that enter into the analysis are: the rate at which each load (dead load, accidental internal pressure, earthquake, etc.) will occur, its duration and intensity. All these parameters are basically random variables for most of the loads to be considered. For dynamic loads, the overall intensity is usually characterized not only by their dynamic components but also by their static components. The structure considered in the present paper is a reinforced concrete containment structure subjected to various static and dynamic loads such as dead loads, accidental pressure, earthquake acceleration, etc. Computations are performed to evaluate the limit state probabilities under each load combination separately and also under all possible combinations of such loads.

Shinozuka, M.; Kako, T.; Hwang, H.; Brown, P.; Reich, M.

1983-01-01T23:59:59.000Z

360

Quantum motor and future  

E-Print Network (OSTI)

In a popular language, the possibilities of the Casimir expulsion effect are presented, which can be the basis of quantum motors. Such motors can be in the form of a special multilayer thin film with periodic and complex nanosized structures. Quantum motors of the type of the Casimir platforms can be the base of transportation, energy and many other systems in the future.

Evgeny G. Fateev

2013-01-20T23:59:59.000Z

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Quantum motor and future  

E-Print Network (OSTI)

In a popular language, the possibilities of the Casimir expulsion effect are presented, which can be the basis of quantum motors. Such motors can be in the form of a special multilayer thin film with periodic and complex nanosized structures. Quantum motors of the type of the Casimir platforms can be the base of transportation, energy and many other systems in the future.

Fateev, Evgeny G

2013-01-01T23:59:59.000Z

362

Reliability in future electricity mixes: the question of distributed and renewables sources  

E-Print Network (OSTI)

systems, with the development of distributed energy sources and the emergence of the smartgrid, thus encouraging the development of microgrids and smartgrids. With the development of distributed

Paris-Sud XI, Université de

363

Reliability Assessment of the Water Supply Systems under Uncertain Future Extreme Climate Conditions  

Science Conference Proceedings (OSTI)

Increase in global mean temperature and changes in rainfall amount, pattern and distribution over the world are all indicative of climate change events. These changes alter the hydro-climatic condition of regions as well as the availability of ...

Mohammad Karamouz; Erfan Goharian; Sara Nazif

364

Reliability Assessment of the Water Supply Systems under Uncertain Future Extreme Climate Conditions  

Science Conference Proceedings (OSTI)

Increase in global mean temperature and changes in rainfall amount, pattern, and distribution over the world are all indicative of climate change events. These changes alter the hydroclimatic condition of regions as well as the availability of ...

Mohammad Karamouz; Erfan Goharian; Sara Nazif

2013-10-01T23:59:59.000Z

365

Engineering Education - A Future Management Of The Future  

E-Print Network (OSTI)

Processes and structures of current engineering praxis, as well as those of the present university engineering education, are closely related to progress and stasis of modern nation state, and modernity as such. In the current post-modern knowledge society, the engineering education needs to redefine its priorities and find a new footing. In the knowledge society, the higher education has become of supreme importance for the functioning of its structures rooted in learning. Structural rigidity of higher education based on the authority and financial resources of the nation state in stasis does not correspond to dynamics of present culture development. Institutions of higher education need to be de-nationalised, as they need freedom for employment of their resources in an effort to reach goals set by regional and global standards. Contemporary societies are characterised by self generated structures and the capacity to determine their own future. Knowledge is a fundamental organisational principle of the way we live. Generation, reproduction, distribution, and realisation of knowledge, i.e. education, represent corner stones of contemporary social order. This has been especially apparent since the violence and intimidation of the 11 September 2001 in the United States. An access to education per se does not guarantee that the education will be accomplished. Education is primarily a cultural phenomenon. The post-modern engineering education should aim at teaching a flexible, target oriented, and responsible individual who is able to distinguish in the chaos of data generated by the Net. Future oriented engineering education means not only the development of rational thinking, logical analysis, and action directed conclusion making but also facilitating of unders...

Borek Sousedik

2002-01-01T23:59:59.000Z

366

Reliability and Functional Availability of HVAC Systems  

E-Print Network (OSTI)

This paper presents a model to calculate the reliability and availability of heating, ventilation and air conditioning systems. The reliability is expressed in the terms of reliability, maintainability and decision capability. These terms are a function of the mean time between failure, mean time to repair and decision time. The availability is expressed as an operational and functional availability of the systems. These terms are a function of both the technical and human characteristics to maintain the systems in correct operational state. The result is based on a large amount data from operational organisations, the compulsory inspection of ventilation systems and momentary and continuous measurements made in HVAC-systems.

Myrefelt, S.

2004-01-01T23:59:59.000Z

367

An Integrative Approach to Reliability Analysis of an IEC 61850 Digital Substation  

E-Print Network (OSTI)

In recent years, reliability evaluation of substation automation systems has received a significant attention from the research community. With the advent of the concept of smart grid, there is a growing trend to integrate more computation and communication technology into power systems. This thesis focuses on the reliability evaluation of modern substation automation systems. Such systems include both physical devices (current carrying) such as lines, circuit breakers, and transformers, as well as cyber devices (Ethernet switches, intelligent electronic devices, and cables) and belong to a broader class of cyber-physical systems. We assume that the substation utilizes IEC 61850 standard, which is a dominant standard for substation automation. Focusing on IEC 61850 standard, we discuss the failure modes and analyze their effects on the system. We utilize reliability block diagrams for analyzing the reliability of substation components (bay units) and then use the state space approach to study the effects at the substation level. Case study is based on an actual IEC 61850 substation automation system, with different network topologies consideration concluded. Our analysis provides a starting point for evaluating the reliability of the substation and the effects of substation failures to the rest of the power system. By using the state space methods, the steady state probability of each failure effects were calculated in different bay units. These probabilities can be further used in the modeling of the composite power system to analyze the loss of load probabilities.

Zhang, Yan 1988-

2012-12-01T23:59:59.000Z

368

Jenseits des Standard Modells  

NLE Websites -- All DOE Office Websites (Extended Search)

The Standard Model The Standard Model Unngelöste RĂ€tsel Jenseits des Standard Modells Das Standard Modell gibt auf viele Fragen, ĂŒber Struktur und StabilitĂ€t der Materie eine Antwort. Dazu braucht es nur die sechs Sorten von Quarks und Leptonen und die vier fundamentalen KrĂ€fte. Aber das Standard Modell ist nicht vollstĂ€ndig; es gibt noch viele unbeantwortete Fragen. Eigentlich sollten wir aus GrĂŒnden der Symmetrie im Weltraum gleichviel Materie wie Antimaterie beobachten. Wir finden aber praktisch nur normale Materie! Warum? Woraus besteht die "Dunkle Materie", die wir nicht sehen können, die aber im Universum sichtbare Gravitationswirkungen zeigt? Warum kann das Standard Modell die Massen der Teilchen nicht vorhersagen? Sind Quarks and Leptonen wirklich fundamentae Teilchen, oder sind sie aus noch elementareren Partikeln aufgebaut?

369

February 2001 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Standards Technical Standards Program Document Status Visit the Technical Standards Program Web Site: http://tis.eh.doe.gov/techstds/ Activity Summary In Conversion - 4 In Preparation - 35 Out for Comment - 18 Published this Month - 1 FY 2001 5-year Reviews Revisions in Progress - 2 Reaffirmations in Progress - 2 Supersedures in Progress - 6 Cancellations Pending - 11 Cancellations in Progress - 33 No Current Action - 16 DOE Technical Standards Project Canceled If you have any questions about this action, please contact the person listed be- low. The following DOE Technical Standards project was recently canceled: * EM Facility Hazard Categorization, Project Number SAFT-0029; EM Technical Standards Manager, John Serocki, 301-903-7999, John.Serocki@em.doe.gov, or Tom Wright, 301-903-3661, Tom.Wright@em.doe.gov. The need for this

370

Standards Actions, October 2000  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Project Initiated Project Initiated If you have any questions or are interested in participating in the development of this standard, please contact the representatives listed below. Complete listings of all DOE Technical Standards projects and their status are given in the Technical Standards Pro- gram (TSP) Web Site referenced at the bottom of this page. To access these lists from the home page, click on “DOE Technical Standards,” then click on “Projects” in the left- hand frame to show the links to the project lists. The following DOE Technical Standards project was recently initiated: • Hoisting and Rigging Standard, Project Number SAFT-0077. This project is being pre- pared by the Hoisting and Rigging Technical Advisory Committee (HRTAC). If you de- sire to participate in this project, please contact your site representative to the HRTAC

371

October 2006 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Publication Staff Roster 2 Publication Staff Roster 2 DOE Technical Standards Program Document Status 09-26-2006 Activity Summary In Conversion - 4 In Preparation - 24 Out for Comment - 16 Published in September - 1 5-year Review Status Proposed for Revision-5 Revision in Progress-6 Proposed for reaffirmation-1 Reaffirmation in Progress-21 Cancellation Pending-9 Cancellation in Progress-0 Inside This Issue Visit the Technical Standards Program Web Site at http://www.eh.doe.gov/ techstds/ October 2006 Standards Actions 1.0 DOE Standards Actions The complete list of all DOE Technical Standards projects and their status is available on the Technical Standards Program (TSP) web page at http://www.eh.doe.gov/techstds/. To access

372

Improved time-domain accuracy standards for model gravitational waveforms  

Science Conference Proceedings (OSTI)

Model gravitational waveforms must be accurate enough to be useful for detection of signals and measurement of their parameters, so appropriate accuracy standards are needed. Yet these standards should not be unnecessarily restrictive, making them impractical for the numerical and analytical modelers to meet. The work of Lindblom, Owen, and Brown [Phys. Rev. D 78, 124020 (2008)] is extended by deriving new waveform accuracy standards which are significantly less restrictive while still ensuring the quality needed for gravitational-wave data analysis. These new standards are formulated as bounds on certain norms of the time-domain waveform errors, which makes it possible to enforce them in situations where frequency-domain errors may be difficult or impossible to estimate reliably. These standards are less restrictive by about a factor of 20 than the previously published time-domain standards for detection, and up to a factor of 60 for measurement. These new standards should therefore be much easier to use effectively.

Lindblom, Lee [Theoretical Astrophysics 350-17, California Institute of Technology, Pasadena, California 91125 (United States); Baker, John G. [Gravitational Astrophysics Laboratory, NASA/GSFC, Greenbelt, Maryland 20771 (United States); Owen, Benjamin J. [Institute for Gravitation and the Cosmos, Center for Gravitational Wave Physics, Department of Physics, Pennsylvania State University, University Park, Pennsylvania 16802 (United States)

2010-10-15T23:59:59.000Z

373

ISA Approves Standard for Wireless Automation in Process Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ISA Approves Standard for Wireless Automation in Process Control ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications September 22, 2009 - 1:28pm Addthis September 22, 2009 On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. The standard is intended to provide secure, reliable wireless operation for monitoring, alerting, and control applications. It enables robustness with non-ISA-compliant legacy wireless systems, coexistence and interoperability with other wireless devices, and robustness in harsh industrial

374

April 2005 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Notices 1 Non-Government Standards Actions 1 American National Standards Institute (ANSI) 1 American Society of Mechanical Engineers (ASME) 1 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection Association (NFPA) 2 DOE Technical Standards Program Document Status 3-28-2005 Activity Summary In Conversion - 4 In Preparation - 25 Out for Comment - 11 Published in March - 0 5-year Review Status Proposed for Revision-6 Revisions in Progress-4 Proposed for Reaffirmation-3 Reaffirmations in Progress-24 Cancellations Pending-11 Cancellations in Progress-0 Inside This Issue Visit the Technical Standards

375

primary frequency standards  

Science Conference Proceedings (OSTI)

NIST-F1 Cesium Fountain Atomic Clock The Primary Time and Frequency Standard for the United States. NIST-F1, the nation's ...

2013-02-04T23:59:59.000Z

376

Particulate Matter Standards (Ohio)  

Energy.gov (U.S. Department of Energy (DOE))

This chapter of the law that establishes the Ohio Environmental Protection Agency sets the standards for particulate emissions from a variety of sources, including facilities that generate power. ...

377

Columbia- Renewables Portfolio Standard  

Energy.gov (U.S. Department of Energy (DOE))

In November 2004, voters in Columbia, Missouri approved a proposal to adopt a local renewables portfolio standard (RPS).* The initiative requires the city's municipal utility, Columbia Water &...

378

Standards for Document Encasement  

Science Conference Proceedings (OSTI)

... time. We want the preservation community to be able to have a common set of standards to develop its own capabilities.”. ...

2013-07-02T23:59:59.000Z

379

Vacuum Comparison Standard  

Science Conference Proceedings (OSTI)

... Manometers (UIMs), which are primary standards with the lowest stated uncertainty in the world, but require significant time and money to operate. ...

2012-11-16T23:59:59.000Z

380

August 2006 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Notices 1 DOE Technical Standards Published 1 Non-Government Standards Actions 2 American National Standards Institute (ANSI) 2 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection Association (NFPA) 2 DOE Technical Standards Program Document Status 07-26-2006 Activity Summary In Conversion - 4 In Preparation - 22 Out for Comment - 16 Published in July - 2 5-year Review Status Proposed for Revision-5 Revision in Progress-6 Proposed for reaffirmation-1 Reaffirmation in Progress-21 Cancellation Pending-9 Cancellation in Progress-0

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Approved DOE Technical Standards  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

approved-doe-technical-standards Forrestal Building approved-doe-technical-standards Forrestal Building 1000 Independence Avenue, SW Washington, DC 205851.800.dial.DOE en DOE-STD-1150-2013 http://energy.gov/hss/downloads/doe-std-1150-2013 DOE-STD-1150-2013

382

August 2007 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Non-Government Standards Actions 1 American National Standards Institute (ANSI) 1 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection Association (NFPA) 2 Publication Staff Roster 2 DOE Technical Standards Program Document Status 07-27-2007 Activity Summary In Conversion - 4 In Preparation - 27 Out for Comment - 24 Published in June - 0 5-year Review status Proposed for Revision-5 Revision in Progress-6 Proposed for Reaffirmation-1 Reaffirmation in Progress-21 Cancellations Pending-9 Cancellations in Progress-0 Inside This Issue Visit the Technical Standards Program Web Site at

383

October 2007 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Non-Government Standards Actions 1 American National Standards Institute (ANSI) 1 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection Association (NFPA) 2 Publication Staff Roster 2 DOE Technical Standards Program Document Status 09-27-2007 Activity Summary In Conversion - 4 In Preparation - 26 Out for Comment - 27 Published in September - 0 5-year Review status Proposed for Revision-5 Revision in Progress-6 Proposed for Reaffirmation-1 Reaffirmation in Progress-21 Cancellations Pending-9 Cancellations in Progress-0 Inside This Issue Visit the Technical Standards Program Web Site at

384

USING STANDARD SYSTE  

Science Conference Proceedings (OSTI)

... two-phase region for a symmetric blend ... density mismatch of fluid components and segregation ... Standards and Technology in the flow visualization. ...

2001-07-27T23:59:59.000Z

385

Alternative Energy Portfolio Standard  

Energy.gov (U.S. Department of Energy (DOE))

Pennsylvania's Alternative Energy Portfolio Standard (AEPS), created by S.B. 1030 on November 30, 2004, requires each electric distribution company (EDC) and electric generation supplier (EGS) to...

386

Site Lead TQP Standard  

NLE Websites -- All DOE Office Websites (Extended Search)

Qualification Standard for the Office of Safety and Emergency Management Evaluations Site Lead Program May 2011 Office of Enforcement and Oversight Office of Health, Safety and...

387

AND TIME STANDARDS  

Science Conference Proceedings (OSTI)

... mu- tual coupling between the units and to heater thermostat operations. ... resistance-bridge thermostats is planned for use in several new standard ...

2003-01-30T23:59:59.000Z

388

Sustainability Standards Portal (SSP)  

Science Conference Proceedings (OSTI)

... A framework for analysis of standards from different perspectives. ... Dr. Jaehyun Lee Dr. Anantha Narayanan Dr. Paul Witherell Dr. Ram D. Sriram Ms ...

2010-11-15T23:59:59.000Z

389

ORISE: Standards development  

NLE Websites -- All DOE Office Websites (Extended Search)

of industry standards that provide guidance and support to decontamination and decommissioning projects across the United States. Because of our extensive experience...

390

Standard Administrative Procedures  

Science Conference Proceedings (OSTI)

... Standards surveillance and instrument monitoring projects. ... are normally stored in a LEVEL 1 security area must never be left unattended when they ...

2010-07-27T23:59:59.000Z

391

Large Standard Model Chart  

NLE Websites -- All DOE Office Websites (Extended Search)

Standard (tamao mediano) Principal ESTOY PERDIDO Ud puede solicitar una copia REAL de esta hermosa lmina Vea ampliaciones de componentes de la tabla y el texto que...

392

Large Standard Model Chart  

NLE Websites -- All DOE Office Websites (Extended Search)

Tabla del Modelo Standard (tamao mximo) Principal ESTOY PERDIDO Ud puede solicitar una copia REAL de esta hermosa lmina Vea ampliaciones de componentes de la tabla y el...

393

Standard Model Chart  

NLE Websites -- All DOE Office Websites (Extended Search)

Standard Volver Principal ESTOY PERDIDO Usted realmente no necesita memorizar todos los nombres de las partculas, ni cmo interactan, ni sus masas, etc. Sin embargo, a...

394

Fragen zum Standard Modell  

NLE Websites -- All DOE Office Websites (Extended Search)

Quiz What is Fundamental? Fragen zum Standard Modell Frage: Aus wievielen elementaren Teilchen sind die mehr als hundert bekannten Teilchen aufgebaut? Antwort 6 Quarks, 6 Leptonen,...

395

Standard Model Quiz  

NLE Websites -- All DOE Office Websites (Extended Search)

los cientos de partculas conocidas? RESPUESTA: S, 6 quarks, 6 leptones, 6 antiquarks 6 antileptones, y los portadores de fuerza. Regreso a la ruta del Modelo Standard......

396

FEDERAL INFORMATION PROCESSING STANDARDS ...  

Science Conference Proceedings (OSTI)

... This Standard specifies use of a symmetric-key encryption ... definition of "escrow", the key component holders provide the components of a ...

2012-12-20T23:59:59.000Z

397

Standard Reference Materials:  

Science Conference Proceedings (OSTI)

... Statistical analyses of the physical properties from the ... Summary statistics: mean = 118.7 kg·m3, standard ... were acquired in 1980 and 1981 for the ...

2012-04-26T23:59:59.000Z

398

Reliability Assessment of North American Steam Turbines  

Science Conference Proceedings (OSTI)

This survey provides statistics related to the reliability and maintenance of fossil-fueled steam turbines in the continental United States. The analysis focuses primarily on active turbines larger than 200 MW.

2002-04-24T23:59:59.000Z

399

Definition: Reliability Coordinator | Open Energy Information  

Open Energy Info (EERE)

Coordinator Coordinator Jump to: navigation, search Dictionary.png Reliability Coordinator The entity that is the highest level of authority who is responsible for the reliable operation of the Bulk Electric System, has the Wide Area view of the Bulk Electric System, and has the operating tools, processes and procedures, including the authority to prevent or mitigate emergency operating situations in both nextday analysis and real-time operations. The Reliability Coordinator has the purview that is broad enough to enable the calculation of Interconnection Reliability Operating Limits, which may be based on the operating parameters of transmission systems beyond any Transmission Operator's vision.[1] Related Terms transmission lines, Bulk Electric System, transmission line

400

SERC Reliability Corporation | OpenEI  

Open Energy Info (EERE)

SERC Reliability Corporation SERC Reliability Corporation Dataset Summary Description This dataset comes from the Energy Information Administration (EIA), and is part of the 2011 Annual Energy Outlook Report (AEO2011). This dataset is table 113, and contains only the reference case. The dataset uses gigawatts, billion kilowatthours and quadrillion Btu. The data is broken down into generating capacity, electricity generation and energy consumption. Source EIA Date Released April 26th, 2011 (3 years ago) Date Updated Unknown Keywords 2011 AEO Carolina EIA Renewable Energy Generation SERC Reliability Corporation Virginia Data application/vnd.ms-excel icon AEO2011: Renewable Energy Generation by Fuel - SERC Reliability Corporation / Virginia-Carolina- Reference Case (xls, 118.9 KiB) Quality Metrics

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

PV Module Reliability Research (Fact Sheet)  

DOE Green Energy (OSTI)

This National Center for Photovoltaics sheet describes the capabilities of its PV module reliability research. The scope and core competencies and capabilities are discussed and recent publications are listed.

Not Available

2013-06-01T23:59:59.000Z

402

Reliability Issues for Photovoltaic Modules (Presentation)  

DOE Green Energy (OSTI)

Si modules good in field; new designs need reliability testing. CdTe & CIGS modules sensitive to moisture; carefully seal. CPV in product development stage; benefits from expertise in other industries.

Kurtz, S.

2009-10-01T23:59:59.000Z

403

Demand Response For Power System Reliability: FAQ  

SciTech Connect

Demand response is the most underutilized power system reliability resource in North America. Technological advances now make it possible to tap this resource to both reduce costs and improve. Misconceptions concerning response capabilities tend to force loads to provide responses that they are less able to provide and often prohibit them from providing the most valuable reliability services. Fortunately this is beginning to change with some ISOs making more extensive use of load response. This report is structured as a series of short questions and answers that address load response capabilities and power system reliability needs. Its objective is to further the use of responsive load as a bulk power system reliability resource in providing the fastest and most valuable ancillary services.

Kirby, Brendan J [ORNL

2006-12-01T23:59:59.000Z

404

System Software Reliability, 1st edition  

Science Conference Proceedings (OSTI)

Computer software reliability has never been so important. Computers are used in areas as diverse as air traffic control, nuclear reactors, real-time military, industrial process control, security system control, biometric scan-systems, automotive, mechanical ...

H. Pham

2010-12-01T23:59:59.000Z

405

Reliability Challenges for Solar Energy (Presentation)  

DOE Green Energy (OSTI)

PV industry can benefit from reliability testing experience of microelectronics industry . Si modules perform well in field; CdTe/CIGS must be sealed to moisture; CPV in product development stage.

Kurtz, S.

2009-04-27T23:59:59.000Z

406

Photovoltaic Reliability and Engineering (Revised) (Fact Sheet)  

DOE Green Energy (OSTI)

Capabilities fact sheet for the National Center for Photovoltaics: Photovoltaic Reliability and Engineering. One-sided sheet that includes Scope, Core Competencies and Capabilities, and Contact/Web information.

Not Available

2011-06-01T23:59:59.000Z

407

Evaluation of conventional electric power generating industry quality assurance and reliability practices  

DOE Green Energy (OSTI)

The techniques and practices utilized in an allied industry (electric power generation) that might serve as a baseline for formulating Quality Assurance and Reliability (QA and R) procedures for photovoltaic solar energy systems were studied. The study results provide direct near-term input for establishing validation methods as part of the SERI performance criteria and test standards development task.

Anderson, R.T.; Lauffenburger, H.A.

1981-03-01T23:59:59.000Z

408

Reliability Assessment of SMART Reactor Protection System  

Science Conference Proceedings (OSTI)

Component failure rates and integrated system reliability of the SMART reactor protection system were analyzed. The analysis tool of the study was the RELEX 7 computer program developed by Relex Software Corporation. The RELEX software is a PC based computer program which includes the part stress analysis models and the RBD analysis model to calculate component and system reliability. The component failure rate data for the study was selected from the MIL-HDBK-217F. (authors)

Won Young, Yun; Choong Heui, Jeong [Korea Institute of Nuclear Safety, P. O. Box 114, Yusong Post Office, Daejeon (Korea, Republic of); Seong Hun, Kim; Sang Yong, Lee [Sam Chang Enterprise Co. LTD, 974-1, Goyen-ri, Woongchon-myon, Ulju-gun, Ulsan (Korea, Republic of)

2006-07-01T23:59:59.000Z

409

EPRI Distribution Reliability Practices Repository V2  

Science Conference Proceedings (OSTI)

A key objective of EPRI's research into distribution reliability practices is to identify, document and provide practice summary descriptions to research participants in a format that facilitates comparison and aids decision-makers in identifying those practices in place at other utilities which can be applied to their utility to improve performance. This research report presents distribution reliability practice results from six different companies in a repository which places ...

2013-11-27T23:59:59.000Z

410

Driving the Future  

NLE Websites -- All DOE Office Websites (Extended Search)

the Future the Future A r g o n n e ' s v e h i c l e s ys t e m s r e s e A r c h 3 2 v e h i c l e s y s t e m s r e s e a r c h At Argonne National Laboratory's Center for Transportation Research, our goal is to accelerate the development and deployment of vehicle technologies that help reduce our nation's petroleum consumption and greenhouse gas emissions. Our Vehicle Systems research focuses on maximizing vehicle performance and efficiency through in-depth studies of the interactions and integration of components and controls in a large, complex vehicle system. Working with the U.S. Department of Energy (DOE) and the automotive industry, we investigate the potential of vehicle technologies ranging from alternative fuels to advanced powertrains, such as plug-in hybrids and electric vehicles. Funding

411

Nucleic Acid Standards - Standard Ref. Frame  

NLE Websites -- All DOE Office Websites (Extended Search)

A Standard Reference Frame for the Description A Standard Reference Frame for the Description of Nucleic Acid Base-pair Geometry Supplementary Material The report is available at Journal of Molecular Biology (2001) 313: 229 - 237 and The Nucleic Acid Cartesian coordinates for A, C, G, T, and U in the optimized reference frame Adenine, Cytosine, Guanine, Thymine, Uracil Standard chemical structures taken from Clowney et al. (1996), J. Am. Chem. Soc., 118, 509-518). These data do not include C1' atoms, which are placed here in the least-squares plane of the base atoms, with the purine C1'-N9 bond length and C1'-N9-C4 valence angle set respectively to 1.46 Å and 126.5° and the pyrimidine C1'-N1 bond and C1-N1-C2 angle to 1.47 Å and 118.1°. These distances and angles are based on the average glycosyl

412

Electric Power Reliability in Chemical Plants  

E-Print Network (OSTI)

The quality and reliability of utility-generated electric power is presently receiving a great deal of attention from the chemical and refining industry. What changes have taken place to make electric power reliability a major topic of discussion at plants across the country? Has the quality and reliability of utility-generated power deteriorated over the past five or ten years? Or, has the perception of what constitutes reliable power changed with the advent, installation, and increasing usage of microprocessor-based equipment and controllers? The differing views held by both parties tend to make their relationship adversarial. Both parties have problems with their individuals views and the associated monetary costs, which can be either a loss or a gain. Improved reliability for the chemical plant means less "off spec" product, thereby resulting in more product to sell. Improved reliability for the utility means less customer downtime, thereby resulting in more KWH sales and a higher capacity factor. The biggest limiting factor to solving the actual problems is the dollar cost associated with that solution. Each solution must have a payback period that meets the economic criteria for return on investment for either the industry or the utility.

Cross, M. B.

1989-09-01T23:59:59.000Z

413

Development of multi-platform control and instrumentation communications to increase operational reliability - application to MAST  

E-Print Network (OSTI)

Improving the reliability and reducing the maintenance time to give increased availability is a key feature of developing control & instrumentation (C&I) systems relevant to future fusion devices such as DEMO and to fusion power plants. Standardising access to the multiple platforms comprising C&I systems on working plant including software that analyses data is one aspect of achieving this. This has been realised on the MAST Neutral Beam Injection system (MNBI) following an extensive upgrade to the C&I, to improve the operational reliability of the neutral beam plant.

Homfray, D A; Khilar, S; King, R; Payne, D; Simmonds, M R; Tame, C; Whitehead, B

2013-01-01T23:59:59.000Z

414

The Electricity Transmission System Future Vision & Grid Challenges  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Future Vision & Grid Challenges Future Vision & Grid Challenges Summary Results of Breakout Group Discussions Electricity Transmission Workshop Double Tree Crystal City, Arlington, Virginia November 1, 2012 Breakout Group Discussion Overview Future Vision and Grid Challenges Each of the four breakout groups identified the key challenges facing the grid as it integrates all of the various technologies that are (or will be) deployed while ensuring a safe, reliable, and cost-effective system as described in the Future Vision. Utilizing the Grid Tech Team framework, each group identified integration challenges through a systems-based discussion that addressed all of the following topics: * Grid Visibility What challenges in the informational domain (sensors and relays, AMIs, PMUs, end-use energy

415

June 2006 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Page 1 June 2006 Page 1 June 2006 Technical Standards Program Manager's Note 1 Safety for Electrical Workers 2 Significant Federal Laws and Policies 3 Clearance of Solid Materials from Nuclear Facilities 5 Technical Standards Manager Spotlight 6 Topical Committee Developments 7 From the ANSI Web site 8 Don't Get "Board" With

416

Standards Development as Hybridization  

Science Conference Proceedings (OSTI)

While users in the rest of the World have been offered 3G mobile phones based on either the CDMA2000 or W-CDMA standards, users in China have the additional option of using phones based on the TD-SCDMA standard. As a technology largely developed by Chinese ... Keywords: Global, Hybridization, Indigenous, Innovation, Mobile Phones, National, Technology

Xiaobai Shen, Ian Graham, James Stewart, Robin Williams

2013-07-01T23:59:59.000Z

417

Global residential appliance standards  

SciTech Connect

In most countries, residential electricity consumption typically ranges from 20% to 40% of total electricity consumption. This energy is used for heating, cooling, refrigeration and other end-uses. Significant energy savings are possible if new appliance purchases are for models with higher efficiency than that of existing models. There are several ways to ensure or encourage such an outcome, for example, appliance rebates, innovative procurement, and minimum efficiency standards. This paper focuses on the latter approach. At the present time, the US is the only country with comprehensive appliance energy efficiency standards. However, many other countries, such as Australia, Canada, the European Community (EC), Japan and Korea, are considering enacting standards. The greatest potential impact of minimum efficiency standards for appliances is in the developing countries (e.g., China and India), where saturations of household appliances are relatively low but growing rapidly. This paper discusses the potential savings that could be achieved from global appliance efficiency standards for refrigerators and freezers. It also could be achieved from global appliance efficiency standards for refrigerators and freezers. It also discusses the impediments to establishing common standards for certain appliance types, such as differing test procedures, characteristics, and fuel prices. A methodology for establishing global efficiency standards for refrigerators and freezers is described.

Turiel, I.; McMahon, J.E. [Lawrence Berkeley Lab., CA (US); Lebot, B. [Agence Francaise pour la Maitrise de l`Energie, Valbonne (FR)

1993-03-01T23:59:59.000Z

418

Universal software safety standard  

Science Conference Proceedings (OSTI)

This paper identifies the minimum subset required for a truly universal safety-critical software standard. This universal software standard could be used in but is not limited to the following application domains: commercial, military and space ... Keywords: software safety, system safety, validation, verification

P. V. Bhansali

2005-09-01T23:59:59.000Z

419

C# Annotated Standard  

Science Conference Proceedings (OSTI)

Standards, while being definitive, do not usually serve as the best reference to the use of a programming language. Books on languages usually are able to explain usage better, but lack the definitive precision of a standard. This book combines the two; ... Keywords: C#, Computer Science, Programming, Programming Languages

Jon Jagger; Nigel Perry; Peter Sestoft

2007-07-01T23:59:59.000Z

420

MODEL CONSERVATION STANDARD INTRODUCTION  

E-Print Network (OSTI)

standards and surcharge methodology. 2 The term "system cost" means an estimate of all direct costs and transmission to the consumer and, among other factors, waste disposal costs, end-of-cycle costs, and fuel costs. SURCHARGE RECOMMENDATION The Council does not recommend that the model conservation standards be subject

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Search for the fourth standard model family  

Science Conference Proceedings (OSTI)

Existence of the fourth family follows from the basics of the standard model (SM) and the actual mass spectrum of the third family fermions. We discuss possible manifestations of the fourth SM family at existing and future colliders. The LHC and Tevatron potentials to discover the fourth SM family have been compared. The scenario with dominance of the anomalous decay modes of the fourth-family quarks has been considered in detail.

Sahin, M.; Sultansoy, S.; Turkoz, S. [TOBB University of Economics and Technology, Physics Division, Ankara (Turkey); TOBB University of Economics and Technology, Physics Division, Ankara (Turkey) and Institute of Physics, National Academy of Sciences, Baku (Azerbaijan); Ankara University, Department of Physics, Ankara (Turkey)

2011-03-01T23:59:59.000Z

422

Hydrogen Codes and Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

Codes and Standards Codes and Standards James Ohi National Renewable Energy Laboratory 1617 Cole Blvd. Golden, CO 80401 Background The development and promulgation of codes and standards are essential if hydrogen is to become a significant energy carrier and fuel because codes and standards are critical to establishing a market-receptive environment for commercializing hydrogen-based products and systems. The Hydrogen, Fuel Cells, and Infrastructure Technologies Program of the U.S. Department of Energy (DOE) and the National Renewable Energy Laboratory (NREL), with the help of the National Hydrogen Association (NHA) and other key stakeholders, are coordinating a collaborative national effort by government and industry to prepare, review, and promulgate hydrogen codes and standards needed to expedite hydrogen infrastructure development. The

423

Reliabilit PlanningReliability Planning David Duebner, Expansion Planningp g  

E-Print Network (OSTI)

EE552 Reliabilit PlanningReliability Planning David Duebner, Expansion Planningp g September 27, 2010 #12;Reliability Planning OverviewReliability Planning Overview · Midwest ISO Transmission Expansion Plan (MTEP)p ( ) · MTEP Reliability Study Process ­ Planning Criteriag ­ Reliability Analysis

McCalley, James D.

424

Appliances and Commercial Equipment Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

Medium Base Compact Fluorescent Lamps Medium Base Compact Fluorescent Lamps Sign up for e-mail updates on regulations for this and other products The Department of Energy (DOE) has regulated the energy efficiency level of medium base compact fluorescent lamps since 2005. Medium base compact fluorescent lamps (CFLs) or bulbs are the often curly, screw-in versions of the long tube fluorescent lights commonly found in kitchens or garages. CFLs are available in a range of light colors, including incandescent-like "warm" tones. Some CFLs are encased in a bulb-shaped cover to further diffuse the light. These can be used with clamp-on lampshades. CFLs can provide the same lighting as traditional incandescent bulbs for reading and room lighting. The Energy Policy Act of 2005 (EPACT 2005) amended Energy Policy and Conservation Act of 1975 (EPCA) setting energy conservation standards for medium base compact fluorescent lamps. DOE will conduct an analysis of energy, emission and cost reductions when it reviews these standards in future rulemakings.

425

Journeys Beyond the Standard Model  

E-Print Network (OSTI)

Chapter 1 Introduction The Standard Model (SM) of Particleresults of searches for the standard model Higgs boson in ppunderstand new physics. The Standard Model is incom- plete;

Elor, Gilly

2013-01-01T23:59:59.000Z

426

Understanding Service Systems Through Standards  

E-Print Network (OSTI)

T. 2004. Economics of Standards in Information Networks.Kindleberger, C. P. 1983. Standards as Public, Collectivethe nature of today's standards. Presented at the “

Mathew, Ashwin J.

2008-01-01T23:59:59.000Z

427

Reliability and Cost-Benefit-Based Standards for Transmission Network Operation and Design  

E-Print Network (OSTI)

...................................................................................................................... 143 Table C.3: Breakdown of transmission costs during t3 when considering all outages to single outages N-2 Deterministic security policy that refers to double outages O Operational cost #12. Probabilistic cost-benefit framework considered to replace historical deterministic N-k criteria. No changes

Catholic University of Chile (Universidad CatĂłlica de Chile)

428

The Standards Forum and Standards Actions - June 2001 | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The Standards Forum and Standards Actions - June 2001 The Standards Forum and Standards Actions - June 2001 The Standards Forum and Standards Actions - June 2001 The Standards Forum and Standards Actions - June 2001 Inside this issue: Should DOE Organizations Include DOE O 252.1 in their Contracts?....................................................... 1 Metrology/Accreditation Personnel and Nuclear Weapons Complex Managers Take Action Addressing Current Issues at Joint Annual Meeting........................................................................ 1 A Note from the Manager........................................................................................................................ 2 Welcome Aboard the TSMC!..................................................................................................................

429

Control Performance Standards and Procedures for Interconnected Operation  

Science Conference Proceedings (OSTI)

This report documents joint efforts of the North American Electric Reliability Council (NERC) and EPRI to develop new control area performance standards for operation of the North American Interconnections. These criteria will optimize operational efficiency of the Interconnections without impacting power system security.

1997-06-10T23:59:59.000Z

430

January 2008 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 1 American National Standards Institute (ANSI) 1 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection Association (NFPA) 2 Publication Staff Roster 2 DOE Technical Standards Program Document Status 12-27-2007 Activity Summary In Conversion - 4 In Preparation - 22 Out for Comment - 26 Published in December - 4 5-year Review status Proposed for Revision-5 Revision in Progress-6 Proposed for Reaffirmation-1 Reaffirmation in Progress-21 Cancellations Pending-9 Cancellations in Progress-0 Inside This Issue Visit the Technical Standards Program Web Site at http://www.hss.energy.gov/nuclear safety/techstds/

431

November 2007 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 1 American National Standards Institute (ANSI) 1 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection Association (NFPA) 2 Publication Staff Roster 2 DOE Technical Standards Program Document Status 10-29-2007 Activity Summary In Conversion - 4 In Preparation - 24 Out for Comment - 30 Published in October - 0 5-year Review status Proposed for Revision-5 Revision in Progress-6 Proposed for Reaffirmation-1 Reaffirmation in Progress-21 Cancellations Pending-9 Cancellations in Progress-0 Inside This Issue Visit the Technical Standards Program Web Site at http://hss.energy.gov/nuclear safetytechstds/

432

Mechanical Systems Qualification Standard  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

61-2008 61-2008 June 2008 DOE STANDARD MECHANICAL SYSTEMS QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1161-2008 ii This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ DOE-STD-1161-2008 iv INTENTIONALLY BLANK DOE-STD-1161-2008 v TABLE OF CONTENTS ACKNOWLEDGMENT................................................................................................................ vii PURPOSE ....................................................................................................................................1

433

February 2008 Standards Actions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 2 American National Standards Institute (ANSI) 2 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection Association (NFPA) 2 Publication Staff Roster 2 DOE Technical Standards Program Document Status 01-28-2008 Activity Summary In Conversion - 4 In Preparation - 22 Out for Comment - 24 Published in January - 3 5-year Review status Proposed for Revision-5 Revision in Progress-6 Proposed for Reaffirmation-1 Reaffirmation in Progress-21 Cancellations Pending-9 Cancellations in Progress-0 Inside This Issue Visit the Technical Standards Program Web Site at http://www.hss.energy.gov/nuclear safety/techstds/

434

Standard for solar collectors  

SciTech Connect

The purpose of this standard is to estabish for solar collectors: definitions; requirements for testing and rating; specifications, literature and advertising requirements; requirements for marking; requirements for safety; and conformance conditions. This standard is intended for the guidance of the industry including manufacturers, engineers, distributors, installers, contractors, and consumers. This standard applies to factory-made solar collectors using either air or a liquid as the heat transfer fluid for one or more of the following purposes: a) heating service water or other fluids and b) heating or cooling of buildings.

1977-01-01T23:59:59.000Z

435

Sonication standard laboratory module  

DOE Patents (OSTI)

A standard laboratory module for automatically producing a solution of cominants from a soil sample. A sonication tip agitates a solution containing the soil sample in a beaker while a stepper motor rotates the sample. An aspirator tube, connected to a vacuum, draws the upper layer of solution from the beaker through a filter and into another beaker. This beaker can thereafter be removed for analysis of the solution. The standard laboratory module encloses an embedded controller providing process control, status feedback information and maintenance procedures for the equipment and operations within the standard laboratory module.

Beugelsdijk, Tony (Los Alamos, NM); Hollen, Robert M. (Los Alamos, NM); Erkkila, Tracy H. (Los Alamos, NM); Bronisz, Lawrence E. (Los Alamos, NM); Roybal, Jeffrey E. (Santa Fe, NM); Clark, Michael Leon (Menan, ID)

1999-01-01T23:59:59.000Z

436

Standard Offer Programs Study  

NLE Websites -- All DOE Office Websites (Extended Search)

Irwin Irwin Industries of the Future - West Virginia West Virginia University National Research Center for Coal & Energy Carl Irwin Industries of the Future - West Virginia West Virginia University National Research Center for Coal & Energy 2 nd Annual Energy & Innovation Conference November 28-29, 2012 November 14-16, 2012 www.TransTechEnergy.org  Move us along the pathway to a low-carbon, industrially competitive, clean energy economy of the future.  Examples include waste heat recovery, CHP, efficiency, new processes for shale gas to chemical feedstocks and fuels, advanced manufacturing processes such as 3-D printing and robotics, hybrid fossil/renewable systems, productive uses of CO 2 , ...  5 external reviews of each application

437

Future Inspection and Monitoring of Underground Transmission Lines  

Science Conference Proceedings (OSTI)

Underground transmission lines have performed reliably for the power transmission industry. Nonetheless, there are opportunities to improve on-line condition assessment of the underground cable systems. Some of these opportunities can be realized by incorporating improved sensors, more efficient power sources to the sensors, enhanced data collection systems, and better integration with utilities operations systems. This report describes technologies that can be applied in future inspection and monitoring...

2009-12-01T23:59:59.000Z

438

ISA Approves Standard for Wireless Automation in Process Control Applications  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications September 22, 2009 On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. The standard is intended to provide secure, reliable wireless operation for monitoring, alerting, and control applications. It enables robustness with non-ISA-compliant legacy wireless systems, coexistence and interoperability with other wireless devices, and robustness in harsh industrial environments. To meet the needs of industrial wireless users and operators of low-energy fixed, portable, and moving

439

The Impact of Protection System Failures on Power System Reliability Evaluation  

E-Print Network (OSTI)

The reliability of protection systems has emerged as an important topic because protection failures have critical influence on the reliability of power systems. The goal of this research is to develop novel approaches for modeling and analysis of the impact of protection system failures on power system reliability. It is shown that repairable and non-repairable assumptions make a remarkable difference in reliability modeling. A typical all-digital protection system architecture is modeled and numerically analyzed. If an all-digital protection system is indeed repairable but is modeled in a non-repairable manner for analysis, the calculated values of reliability indices could be grossly pessimistic. The smart grid is emerging with the penetration of information-age technologies and the development of the Special Protection System (SPS) will be greatly influenced. A conceptual all-digital SPS architecture is proposed for the future smart grid. Calculation of important reliability indices by the network reduction method and the Markov modeling method is illustrated in detail. Two different Markov models are proposed for reliability evaluation of the 2-out-of-3 voting gates structure in a generation rejection scheme. If the model with consideration of both detectable and undetectable logic gate failures is used as a benchmark, the simple model which only considers detectable failures will significantly overestimate the reliability of the 2-out-of-3 voting gates structure. The two types of protection failures, undesired-tripping mode and fail-to-operate mode are discussed. A complete Markov model for current-carrying components is established and its simplified form is then derived. The simplified model can appropriately describe the overall reliability situation of individual components under the circumstances of complex interactions between components due to protection failures. New concepts of the self-down state and the induced-down state are introduced and utilized to build up the composite unit model. Finally, a two-layer Markov model for power systems with protection failures is proposed. It can quantify the impact of protection failures on power system reliability. Using the developed methodology, we can see that the assumption of perfectly reliable protection can introduce errors in reliability evaluation of power systems.

Jiang, Kai

2012-12-01T23:59:59.000Z

440

NIST: Neutron Cross Section Standards  

Science Conference Proceedings (OSTI)

... standards. Description: Measurements have been completed at Ohio University of the important hydrogen scattering angular distribution standard ...

2013-07-30T23:59:59.000Z

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Materials Standards for Additive Manufacturing  

Science Conference Proceedings (OSTI)

... ASTM F2924 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion) except for standards ...

2013-06-04T23:59:59.000Z

442

Calibration Procedures: Standard Operating Procedures  

Science Conference Proceedings (OSTI)

... 18, Calibration of Graduated Neck-Type Metal Volumetric Field Standards, Volumetric Transfer Method Revision ... 20, Standard Deviation and Range ...

2013-09-03T23:59:59.000Z

443

DNA Profiling Standard Reference Materials  

Science Conference Proceedings (OSTI)

... agreement with the NIST Office of Law Enforcement Standards. ... Related Programs and Projects: SRM 2372 - Human DNA Quantitation Standard. ...

2013-03-15T23:59:59.000Z

444

Medical Devices Metrology and Standards  

Science Conference Proceedings (OSTI)

... Medical Devices Metrology and Standards Needs (Download the flyer in pdf ... Standard and Metrology Needs for Surgical Robotics, presented by ...

2013-07-18T23:59:59.000Z

445

Radioactivity Standard Reference Material Program  

Science Conference Proceedings (OSTI)

... Summary: The Standard Reference Materials Program of the National Institute of Standards and Technology (NIST) provides science, industry, and ...

2013-03-27T23:59:59.000Z

446

Examples of Smart Grid Standards  

Science Conference Proceedings (OSTI)

... Examples of Smart Grid Standards. Hundreds of standards will be required for an efficient and effective smart grid. Historically ...

2013-05-09T23:59:59.000Z

447

Securing Our Energy Future  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Our Energy Our Energy Securing Our Energy Future Future World Energy Demand Growing Dramatically 12 1400 1200 10 1000 2000 2050 2100 Population of Population of Industrialized Countries Industrialized Countries Wo W rl r d o ld Po P pu p la l ti t on o o u a i n Wo W rl r d E d ne n rg r y o l E e gy Co C ns n um u pt p io i n o s m t on Population (Billions) Energy Consumption (Qbtu / yr) 8 800 6 600 4 400 2 200 0 0 1900 1950 Year U.S. Electricity Generation by Fue U.S. Electricity Generation by Fuel Electric Generation by Fuel 1980 - 2030 (billion kilowatt-hours) 0 1000 2000 3000 4000 5000 6000 1980 1990 2000 2010 2020 2030 Renewables/Other Nuclear Natural Gas Petroleum Coal Source: EIA Annual Energy Outlook 2008 Why Do We Keep Coal in the Mix? Why Do We Keep Coal in the Mix? World Energy Reserves World Energy Reserves Source: Energy Information Administration/ International Reserves Data

448

NYMEX Futures Prices  

U.S. Energy Information Administration (EIA) Indexed Site

NYMEX Futures Prices NYMEX Futures Prices (Crude Oil in Dollars per Barrel, All Others in Dollars per Gallon) Period: Daily Weekly Monthly Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Product/ Contract 12/10/13 12/11/13 12/12/13 12/13/13 12/16/13 12/17/13 View History Crude Oil (Light-Sweet, Cushing, Oklahoma) Contract 1 98.51 97.44 97.5 96.6 97.48 97.22 1983-2013 Contract 2 98.66 97.72 97.82 96.93 97.77 97.47 1985-2013 Contract 3 98.58 97.72 97.77 96.91 97.7 97.36 1983-2013 Contract 4 98.19 97.39 97.42 96.55 97.28 96.92 1985-2013 Reformulated Regular Gasoline (New York Harbor) Contract 1 1985-2006 Contract 2 1994-2006 Contract 3 1984-2006 Contract 4 1994-2006 RBOB Regular Gasoline (New York Harbor)

449

Standards-Developing Organizations  

Science Conference Proceedings (OSTI)

Table 1   Source of codes and standards related to brazing...749 01 11 Web site: www.iso.ch National Board of Boiler and Pressure Vessel

450

Roundness calibration standard  

DOE Patents (OSTI)

A roundness calibration standard is provided with a first arc constituting the major portion of a circle and a second arc lying between the remainder of the circle and the chord extending between the ends of said first arc.

Burrus, B.M.

1982-01-29T23:59:59.000Z

451

Title Standards 2001  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Standards 2001 Standards 2001 A guide for the preparation of title evidence in land acquisitions by the United States of America. Quick links to Contents: Table of Contents / Why Title Standards 2001, and who uses it? / Evidence of title / Abstract of Title Supplemental and Supporting Title Evidence / Title Insurance Policies and Certificates of Title / Final Title Evidence Title Evidence for Condemnations / The Deed to the United States / Special Standards for Texas / Sample Forms U.S. Department of Justice Environment and Natural Resources Division Land Acquisition Section Washington, D.C. 20530 December 29, 2000 (reprint March 23, 2001) [Editor's Note: The reprint of March 23, 2001, added page numbers to the table of contents; added a new item "3" to part B of Form # 1 of the Certificate of Inspection and Possession,

452

Quality Standards for Abstracts  

Science Conference Proceedings (OSTI)

QUALITY STANDARDS FOR ABSTRACTS American Oil Chemists’ Society (AOCS) An abstract allows you to concisely convey to the scientific community the value and importance of your research. Its restricted length allows the reader to quickly eva

453

Roundness calibration standard  

DOE Patents (OSTI)

A roundness calibration standard is provided with a first arc constituting the major portion of a circle and a second arc lying between the remainder of the circle and the chord extending between the ends of said first arc.

Burrus, Brice M. (6620 Wachese La., Knoxville, TN 37912)

1984-01-01T23:59:59.000Z

454

FREIGHT CONTAINER LIFTING STANDARD  

Science Conference Proceedings (OSTI)

This standard details the correct methods of lifting and handling Series 1 freight containers following ISO-3874 and ISO-1496. The changes within RPP-40736 will allow better reading comprehension, as well as correcting editorial errors.

POWERS DJ; SCOTT MA; MACKEY TC

2010-01-13T23:59:59.000Z

455

EPCglobal : a universal standard  

E-Print Network (OSTI)

This thesis evaluates the likelihood of EPCglobal becoming the universal RFID standard by presenting a framework of ten factors used to analyze and determine if EPCglobal is moving in the right direction. The ten factors ...

Aguirre, Juan Ignacio

2007-01-01T23:59:59.000Z

456

NIST Global Standards Information Asia-Pacific  

Science Conference Proceedings (OSTI)

... Regions >; Asia-Pacific >; Ensuring Photovoltaic (PV) Reliability and >. Workshop on Ensuring Photovoltaic (PV) Reliability and Durability. ...

457

DOE technical standards list. Department of Energy standards index  

Science Conference Proceedings (OSTI)

This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listing of current DOE technical standards, non-Government standards that have been adopted by DOE, other Government documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

NONE

1995-08-01T23:59:59.000Z

458

Reliability based investigation of design factors  

SciTech Connect

Second-moment probabilistic techniques are used to formulate structural resistances and loads and to derive reliability-based safety, load, and strength factors for design. Existing concepts of the second-moment reliability theory have been extended to the practical case of multiple load combinations. This development consistently includes the stochastic character of loads and the unpredictable nature of their combinations. For this purpose, a new technique for the evaluation of load combinations is presented, whereby the moments of the extreme of combined loads is obtained in terms of the moments of individual loads and parameters describing their random fluctuations in time. Reliability-based safety, load, and strength factors are derived in terms of the acceptable level of risk, the coefficients of variation of the loads and resistance, uncertainties associated with errors in modeling and estimation, and a set of parameters describing the stochastic nature of loads and their combinations.

1978-06-30T23:59:59.000Z

459

Smart Grid: Creating Jobs while Delivering Reliable,  

Open Energy Info (EERE)

Smart Grid: Creating Jobs while Delivering Reliable, Smart Grid: Creating Jobs while Delivering Reliable, Environmentally-friendly Energy Home > Groups > OpenEI Community Central Graham7781's picture Submitted by Graham7781(1992) Super contributor 2 March, 2010 - 14:14 imported OpenEI On April 16th, 2009, Vice President Joe Biden announced that the Department of Energy was planning to develop a stronger, more reliable energy grid. The plan would allocate $3.4 billion in funds to be distributed across the nation, aiding projects aimed at improving and updating the current electrical power grid in the United States. Two projects are funded by smart grid: smaller and larger. Smaller projects range from $300,000 to $20,000,000. These projects typically focus on upgrading equipment in less populated ares. Larger projects range from

460

Nuclear Power - Control, Reliability and Human Factors  

E-Print Network (OSTI)

Advances in reactor designs, materials and human-machine interfaces guarantee safety and reliability of emerging reactor technologies, eliminating possibilities for high-consequence human errors as those which have occurred in the past. New instrumentation and control technologies based in digital systems, novel sensors and measurement approaches facilitate safety, reliability and economic competitiveness of nuclear power options. Autonomous operation scenarios are becoming increasingly popular to consider for small modular systems. This book belongs to a series of books on nuclear power published by InTech. It consists of four major sections and contains twenty-one chapters on topics from key subject areas pertinent to instrumentation and control, operation reliability, system aging and human-machine interfaces. The book targets a broad potential readership group - students, researchers and specialists in the field - who are interested in learning about nuclear power.

Tsvetkov, Pavel

2011-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Drinking Water Standards  

E-Print Network (OSTI)

This publication explains the federal safety standards for drinking water provided by public water supply systems. It discusses the legal requirements for public water supplies, the maximum level allowed for contaminants in the water, and the potential health effects of each contaminant regulated. People who use water from private sources such as wells can also use these standards as a guide in checking whether their water is safe.

Dozier, Monty; McFarland, Mark L.

2006-04-26T23:59:59.000Z

462

Standards for ICCP API  

Science Conference Proceedings (OSTI)

The Inter-Control Center Communication Protocol (ICCP) was developed as an EPRI project for the exchange of power system information between control centers, or between a control center and a generation control system or substation. ICCP is now an international standard, IEC 60870-6 known as Telecontrol Application Service Element 2 (TASE.2). However, the application program interface (API) was not a part of that standard and was left as a "local implementation issue" for each ICCP vendor to define. The ...

1999-12-10T23:59:59.000Z

463

SAE Standards Support  

Science Conference Proceedings (OSTI)

This report summarizes PNNL activities in FY 2012 in support of the following two vehicle communication standards activities: • Technical support to SAE, ANSI and NIST technical working groups. PNNL actively contributed to the use case development, harmonization, and evaluation of the SAE standards activities for vehicle to grid communication • Tested and validated a set of potential technologies for meeting SAE communication requirements and provided recommendations for technology choices.

Gowri, Krishnan

2012-11-01T23:59:59.000Z

464

2013 Reliability & Markets Peer Review | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

2013 Reliability & Markets Peer Review 2013 Reliability & Markets Peer Review 2013 Reliability & Markets Peer Review The Transmission Reliability R&D Reliability & Markets Peer Review included 13 presentations over 2 days on August 6 - 7, 2013 at Cornell University in Ithaca, NY. Presentations are available through the links. The agenda and list of presentations are included below. The Reliability and Markets activity of the Transmission Reliability program researches, develops, and implements electricity infrastructure and market simulations that integrate economics and engineering principles. The activity helps to ensure electric reliability, while also improving the efficiency and economics of market operations. Day 1: August 6 Session I Transmission Investment Assessment Under Uncertainty, Ben Hobbs,

465

Office of Electricity Delivery & Energy Reliability FY 2012 Budget...  

NLE Websites -- All DOE Office Websites (Extended Search)

Office of Electricity Delivery & Energy Reliability FY 2012 Budget Request Presentation Office of Electricity Delivery & Energy Reliability FY 2012 Budget Request Presentation...

466

Reliability of islanded microgrids with stochastic generation and prioritized load  

E-Print Network (OSTI)

The potential to improve distribution system reliability is a primary motivation behind the development and deployment of microgrids. Previous studies have illustrated substantial reliability benefits of dispatchable ...

Marden, Mirjana Milosevic

467

Washington DC Reliability Requirements and the Need to Operate...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Washington DC Reliability Requirements and the Need to Operate Mirant's Potomac River Generation Station to Support Local Area Reliability (Oak Ridge National Laboratory 2005)...

468

An Examination of Temporal Trends in Electricity Reliability...  

NLE Websites -- All DOE Office Websites (Extended Search)

An Examination of Temporal Trends in Electricity Reliability Based on Reports from U.S. Electric Utilities Title An Examination of Temporal Trends in Electricity Reliability Based...

469

Office of Electricity Delivery and Energy Reliability: Organizational...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Skip to main content Energy.gov Office of Electricity Delivery & Energy Reliability Search form Search Office of Electricity Delivery & Energy Reliability Services Electricity...

470

Improving the Reliability and Resiliency of the US Electric Grid...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Improving the Reliability and Resiliency of the US Electric Grid: SGIG Article in Metering International, March 2012 Improving the Reliability and Resiliency of the US Electric...

471

Load Control for System Reliability and Measurement-Based Stability...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Load Control for System Reliability and Measurement-Based Stability Assessment Load Control for System Reliability and Measurement-Based Stability Assessment Research and develop...

472

Cyber Effects Analysis Using VCSE Promoting Control System Reliability...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cyber Effects Analysis Using VCSE Promoting Control System Reliability Cyber Effects Analysis Using VCSE Promoting Control System Reliability This report describes the Virtual...

473

Office of Electricity Delivery & Energy Reliability 2010 Strategic...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here Home Office of Electricity Delivery & Energy Reliability 2010 Strategic Plan (WEB) Office of Electricity Delivery & Energy Reliability 2010 Strategic Plan...

474

Office of Electricity and Delivery & Energy Reliability 2010...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here Home Office of Electricity and Delivery & Energy Reliability 2010 Strategic Plan (PRINT) Office of Electricity and Delivery & Energy Reliability 2010 Strategic...

475

Efficient and Reliable Reactive Power Supply and Consumption...  

NLE Websites -- All DOE Office Websites (Extended Search)

Efficient and Reliable Reactive Power Supply and Consumption - Insights from an Integrated Program of Engineering and Economics Research Title Efficient and Reliable Reactive Power...

476

USE OF VOLUNTARY CONSENSUS STANDARDS AND INTERACTION WITH STANDARDS  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

USE OF VOLUNTARY CONSENSUS STANDARDS AND INTERACTION WITH STANDARDS USE OF VOLUNTARY CONSENSUS STANDARDS AND INTERACTION WITH STANDARDS DEVELOPMENT ORGANIZATIONS USE OF VOLUNTARY CONSENSUS STANDARDS AND INTERACTION WITH STANDARDS DEVELOPMENT ORGANIZATIONS Purpose This procedure identifies the process by which DOE adopts Voluntary Consensus Standards (VCSs) and provides guidance for the interaction of DOE and contractor employees with Standards Development Organizations (SDOs). Use of Voluntary Consensus Standards and Interaction with Standards Development Organizations (TSPP-03) More Documents & Publications DOE-TSPP-3, Use of Voluntary Consensus Standards and Interaction with Standards Development Organizations - August 1, 2000 DOE-TSPP-3, Use of Non-Government Standards and Interaction with Non-Government Standards Bodies - July 1, 2009

477

DOE technical standards list: Department of Energy standards index  

Science Conference Proceedings (OSTI)

This Department of Energy (DOE) technical standards list (TSL) has been prepared by the Office of Nuclear Safety Policy and Standards (EH-31) on the basis of currently available technical information. Periodic updates of this TSL will be issued as additional information is received on standardization documents being issued, adopted, or canceled by DOE. This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listings of current DOE technical standards, non-Government standards that have been adopted by DOE, other standards-related documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

NONE

1999-05-01T23:59:59.000Z

478

The semantics of the future  

E-Print Network (OSTI)

Natural languages use a number of different methods to refer to future eventualities: among them are futurates, as in (la), and futures, as in (lb) and (c). (1) a. The Red Sox (are) play(ing) the Yankees tomorrow. b. We'll ...

Copley, Bridget, Lynn, 1974-

2002-01-01T23:59:59.000Z

479

Gearbox Reliability Collaborative Update: A Brief (Presentation)  

DOE Green Energy (OSTI)

This presentation is an update on the Gearbox Reliability Collaborative (GRC) for the AWEA Wind Project Operations, Maintenance & Reliability Seminar. GRC accomplishments are: (1) Failure database software deployed - partners see business value for themselves and customers; (2) Designed, built, instrumented, and tested two gearboxes - (a) Generated unprecedented public domain test data from both field testing and dynamometer testing, (b) Different responses from 'identical' gearboxes, (c) Demonstrated importance of non-torque loading and modeling approach; and (3) Active collaborative, with wide industry support, leveraging DOE funding - Modeling round robin and Condition Monitoring round robin.

Sheng, S.; Keller, J.; McDade, M.

2012-01-01T23:59:59.000Z

480

Gearbox Reliability Collaborative Update: A Brief (Presentation)  

SciTech Connect

This presentation is an update on the Gearbox Reliability Collaborative (GRC) for the AWEA Wind Project Operations, Maintenance & Reliability Seminar. GRC accomplishments are: (1) Failure database software deployed - partners see business value for themselves and customers; (2) Designed, built, instrumented, and tested two gearboxes - (a) Generated unprecedented public domain test data from both field testing and dynamometer testing, (b) Different responses from 'identical' gearboxes, (c) Demonstrated importance of non-torque loading and modeling approach; and (3) Active collaborative, with wide industry support, leveraging DOE funding - Modeling round robin and Condition Monitoring round robin.

Sheng, S.; Keller, J.; McDade, M.

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "reliability standards future" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Network location of a reliable center using the most reliable route policy  

Science Conference Proceedings (OSTI)

This paper considers a single location on an undirected network with unreliable edges that maximizes the lowest performance level of the network service with respect to all nodes. The problem is termed the reliable 1-center problem and finds applications ... Keywords: 1-Center, Location theory, Network reliability, Stochastic optimization

José Santiváńez; Emanuel Melachrinoudis; Mary E. Helander

2009-05-01T23:59:59.000Z

482

National Energy Research Scientific Computing Center NERSC Exceeds Reliability  

NLE Websites -- All DOE Office Websites (Extended Search)

Scientific Scientific Computing Center NERSC Exceeds Reliability Standards With Tape-Based Active Archive Research Facility Accelerates Access to Data while Supporting Exponential Growth Founded in 1974, the National Energy Research Scientific Computing Center (NERSC) is the primary scientific com- puting facility for the Office of Science in the U.S. Department of Energy. NERSC is located at Lawrence Berkeley National Laboratory's Oakland Scientific Facility in Oakland, California and is mandated with providing computational resources and expertise for scientific research to about 5,000 scientists at national labora- tories and universities across the United States, as well as their international col- laborators. A division of Lawrence Berke- ley National Laboratory, NERSC supports

483

ELECTRICAL SUBSTATION RELIABILITY EVALUATION WITH EMPHASIS ON EVOLVING INTERDEPENDENCE ON COMMUNICATION INFRASTRUCTURE.  

Science Conference Proceedings (OSTI)

This study developed a probabilistic methodology for assessment of the reliability and security of electrical energy distribution networks. This included consideration of the future grid system, which will rely heavily on the existing digitally based communication infrastructure for monitoring and protection. Event tree and fault tree methods were utilized. The approach extensively modeled the types of faults that a grid could potentially experience, the response of the grid, and the specific design of the protection schemes. We demonstrated the methods by applying it to a small sub-section of a hypothetical grid based on an existing electrical grid system of a metropolitan area. The results showed that for a typical design that relies on communication network for protection, the communication network reliability could contribute significantly to the frequency of loss of electrical power. The reliability of the communication network could become a more important contributor to the electrical grid reliability as the utilization of the communication network significantly increases in the near future to support ''smart'' transmission and/or distributed generation.

AZARM,M.A.; BARI,R.; YUE,M.; MUSICKI,Z.

2004-09-12T23:59:59.000Z

484

FAQ : Future Scientists  

NLE Websites -- All DOE Office Websites (Extended Search)

FAQ FAQ How do I get started as a school volunteer? You can talk with program coordinator, Rick Diamond, or any of the EETD staff who have already participated in the Future Scientist program. To contact Rick Diamond, please call (510) 486-4459 or enable JavaScript within your browser's preferences. When you are ready to plan a classroom visit, call the Community Resources for Science (CRS) and ask about school and grade availability for your topic. CRS staff will place you with a K-6 grade teacher in the East Bay. CRS can also provide excellent advise on classroom guidance and materials, and handle all the contact logistics. All you do is give them a call. Community Resources for Science 1375 Ada Street Berkeley, CA 94702 (510) 654-6433 http://www.crscience.org/

485

future science group  

NLE Websites -- All DOE Office Websites (Extended Search)

35 35 ISSN 1759-7269 10.4155/BFS.13.56 © 2013 Future Science Ltd While lignocellulosic feedstocks represent a promising renewable and sustainable alternative to petroleum- based fuels, high production costs associated with con- version processes currently prevent them from being economically viable for large-scale implementation [1]. The production of biofuels from lignocellulosic feedstocks requires the depolymerization of cell wall carbohydrates into simple sugars that can be utilized during fermentation. However, the desired cellulose microfibrils are surrounded by a matrix of lignin and hemicellulose, which greatly inhibits their accessibility to hydrolytic enzymes [1,2]. Lignin is a phenolic polymer that reinforces the secondary cell wall, confers struc-

486

future science group  

NLE Websites -- All DOE Office Websites (Extended Search)

61 61 ISSN 1759-7269 10.4155/BFS.11.150 © 2012 Future Science Ltd In 1950 Reese et al. proposed a mechanism for cel- lulose hydrolysis, which involved two general com- ponents, C 1 and C x , acting in sequence [1]. According to the model, the C 1 component first disrupted and swelled the crystalline cellulose, possibly releasing soluble oligo saccharides into solution. The C x compo- nent, which was shown to have endoglucanase activity, was then able to effectively hydrolyze the previously inaccessible substrate along with the soluble oligo- saccharides. Furthermore, the activity of the mixture was found to be higher than the activity of each com- ponent acting alone, indicating that the components were acting synergistically. In the following years, a number of groups began to identify and characterize

487

Future power supply  

Science Conference Proceedings (OSTI)

This article is a review of the U.S. needs for new generating capacity during the next decade. Considering regulatory and technical issues and assuming a modest annual load growth of 1.9%, it is anticipated that there will be a 90 GWe deficit by the year 2000. Likely sources to provide this additional capacity are reviewed, and it is concluded that most new plants will be gas-fired simple-cycle combustion turbines. This will occur mainly because the country has excess baseload capacity and needs to add a considerable amount of peaking capacity to bring the generation mix into balance. It is also concluded that fossil-fueled plants will provide the country`s baseload for the foreseeable future.

Campbell, N.A.; Harris, K. [Burns & McDonnell Engineering Co., Kansas City, MO (United States)

1993-03-01T23:59:59.000Z

488

Nuclear Energy Research Initiative. Risk Informed Assessment of Regulatory and Design Requirements for Future Nuclear Power Plants. Annual Report  

Science Conference Proceedings (OSTI)

The overall goal of this research project is to support innovation in new nuclear power plant designs. This project is examining the implications, for future reactors and future safety regulation, of utilizing a new risk-informed regulatory system as a replacement for the current system. This innovation will be made possible through development of a scientific, highly risk-informed approach for the design and regulation of nuclear power plants. This approach will include the development and.lor confirmation of corresponding regulatory requirements and industry standards. The major impediment to long term competitiveness of new nuclear plants in the U.S. is the capital cost component--which may need to be reduced on the order of 35% to 40% for Advanced Light Water Reactors (ALWRs) such as System 80+ and Advanced Boiling Water Reactor (ABWR). The required cost reduction for an ALWR such as AP600 or AP1000 would be expected to be less. Such reductions in capital cost will require a fundamental reevaluation of the industry standards and regulatory bases under which nuclear plants are designed and licensed. Fortunately, there is now an increasing awareness that many of the existing regulatory requirements and industry standards are not significantly contributing to safety and reliability and, therefore, are unnecessarily adding to nuclear plant costs. Not only does this degrade the economic competitiveness of nuclear energy, it results in unnecessary costs to the American electricity consumer. While addressing these concerns, this research project will be coordinated with current efforts of industry and NRC to develop risk-informed, performance-based regulations that affect the operation of the existing nuclear plants; however, this project will go farther by focusing on the design of new plants.

Ritterbusch, S.E.

2000-08-01T23:59:59.000Z

489

IEEE 1547 Series of Standards: Interconnection Issues; Preprint  

DOE Green Energy (OSTI)

IEEE 1547TM 2003 Standard for Interconnecting Distributed Resources With Electric Power Systems is the first in the 1547 series of planned interconnection standards. Major issues and a wealth of constructive dialogue arose during 1547 development. There was also a perceived increased vitality in updating complementary IEEE standards and developing additional standards to accommodate modern electrical and electronics systems and improved grid communications and operations. Power engineers and other stakeholders looking to the future are poised to incorporate 1547 into their knowledge base to help transform our nation's aging distribution systems while alleviating some of the burden on existing transmission systems.

Basso, T.; DeBlasio, R.

2003-09-01T23:59:59.000Z

490

Improved Measurements Could Mean Safer, More Reliable ...  

Science Conference Proceedings (OSTI)

... a person by delivering a high-voltage, low-current electric shock - have ... a standard method for accurately assessing the electrical output of ...

2011-04-26T23:59:59.000Z

491

Scoping study on trends in the economic value of electricity reliability to the U.S. economy  

SciTech Connect

During the past three years, working with more than 150 organizations representing public and private stakeholders, EPRI has developed the Electricity Technology Roadmap. The Roadmap identifies several major strategic challenges that must be successfully addressed to ensure a sustainable future in which electricity continues to play an important role in economic growth. Articulation of these anticipated trends and challenges requires a detailed understanding of the role and importance of reliable electricity in different sectors of the economy. This report is intended to contribute to that understanding by analyzing key aspects of trends in the economic value of electricity reliability in the U.S. economy. We first present a review of recent literature on electricity reliability costs. Next, we describe three distinct end-use approaches for tracking trends in reliability needs: (1) an analysis of the electricity-use requirements of office equipment in different commercial sectors; (2) an examination of the use of aggregate statistical indicators of industrial electricity use and economic activity to identify high reliability-requirement customer market segments; and (3) a case study of cleanrooms, which is a cross-cutting market segment known to have high reliability requirements. Finally, we present insurance industry perspectives on electricity reliability as an example of a financial tool for addressing customers' reliability needs.

Eto, Joseph; Koomey, Jonathan; Lehman, Bryan; Martin, Nathan; Mills, Evan; Webber, Carrie; Worrell, Ernst

2001-06-01T23:59:59.000Z

492

Beyond the Standard Model  

NLE Websites -- All DOE Office Websites (Extended Search)

allĂĄ del Modelo Standard allĂĄ del Modelo Standard Avanzar Volver Principal ESTOY PERDIDO!!! El modelo standard explica muchas de las preguntas acerca de la estructura y la estabilidad de la materia, con sus seis tipos de quarks, sus seis tipos de leptones, y sus cuatro fuerzas fundamentales. Sin embargo, el modelo standard es una teorĂ­a incompleta porque todavĂ­a no puede explicar la naturaleza del mundo en forma completa. ÂżPor quĂ© hay tres generaciones de quarks y leptones? ÂżLos quarks y leptones son realmente fundamentales, o estĂĄn constituidos a su vez por partĂ­culas aĂșn mĂĄs fundamentales? ÂżPor quĂ© no puede el modelo standard predecir la masa de una partĂ­cula? De acuerdo con nuestros experimentos, las cantidades de materia y antimateria en el universo deberĂ­an ser iguales; pero, Âżpor quĂ© hemos

493

Software reliability assessment via fuzzy logic model  

Science Conference Proceedings (OSTI)

Recently in software engineering it became of great importance to be able to reason about non functional characteristics of software. This holds for a large variety of application areas like embedded and safety-critical software systems as well as service-oriented ... Keywords: fuzzy logic, fuzzy models, service oriented software systems, software reliability

Olga Georgieva; Aleksandar Dimov

2011-06-01T23:59:59.000Z

494

Reliable and efficient reprogramming in sensor networks  

Science Conference Proceedings (OSTI)

Retasking and remote programming of sensor networks is an essential functionality to make these networks practical and effective. As the availability of more capable sensor nodes increases and new functional implementations continue to be proposed, these ... Keywords: Broadcast, energy efficiency, minimum energy broadcast, reliable distribution, reprogramming, retasking, sensor networks

Chris Miller; Christian Poellabauer

2010-08-01T23:59:59.000Z

495

Granite Reliable Power | Open Energy Information  

Open Energy Info (EERE)

Reliable Power Reliable Power Jump to: navigation, search Name Granite Reliable Power Facility Granite Reliable Power Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Brookfield Renewable Energy Group Developer Brookfield Renewable Energy Group Energy Purchaser Green Mountain Power / Central Vermont Public Service / New England Power Pool Location Milan NH Coordinates 44.74039314°, -71.28376007° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":44.74039314,"lon":-71.28376007,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

496

Guidelines for New High Reliability Fossil Plants  

Science Conference Proceedings (OSTI)

Many new power plants are being constructed throughout the world, and many organizations are beginning to design and commission new fossil plants. These circumstances provide an excellent opportunity to build long-term reliability into the specifications and designs for the new plants.

2009-01-28T23:59:59.000Z

497

Guidelines for New High Reliability Fossil Plants  

Science Conference Proceedings (OSTI)

The purity of water and steam is central to ensuring fossil plant component availability and reliability. New plants should have the optimum cycle chemistry features designed in, and the guidelines provided in this report will assist owners and operators of new plants in specifying these features during the design phase.

2007-02-26T23:59:59.000Z

498

Reliability and maintainability seminar: summary of proceedings  

DOE Green Energy (OSTI)

The following are described briefly: Overview of the Federal Reliability and Maintainability Program Plan, Summary of Proceedngs, Overview of Southern Solar Energy Center Programs, and Solar Domestic Hot Water Design Guidelines Handbook. Also included are the Seminar Agenda and the list of Seminar Attendees. (MHR)

Beek, C.R.

1981-04-01T23:59:59.000Z

499

Reliable water supply system design under uncertainty  

Science Conference Proceedings (OSTI)

Given the natural variability and uncertainties in long-term predictions, reliability is a critical design factor for water supply systems. However, the large scale of the problem and the correlated nature of the involved uncertainties result in models ... Keywords: Data uncertainty, Robust optimization, Spatially correlated data, Water supply system

G. Chung; K. Lansey; G. Bayraksan

2009-04-01T23:59:59.000Z

500

Reliability of underwater hearing thresholds in pinnipeds  

E-Print Network (OSTI)

Reliability of underwater hearing thresholds in pinnipeds Brandon L. Southall Long Marine@ucsc.edu Abstract: Repeated measures of low-frequency underwater hearing sensi- tivity in individuals of three and certain testing parameters (e.g., equipment and research personnel), measured underwater hearing

Reichmuth, Colleen