National Library of Energy BETA

Sample records for reformer fbsr na-al-si

  1. Radioactive Demonstrations Of Fluidized Bed Steam Reforming (FBSR) With Hanford Low Activity Wastes

    SciTech Connect (OSTI)

    Jantzen, C. M.; Crawford, C. L.; Burket, P. R.; Bannochie, C. J.; Daniel, W. G.; Nash, C. A.; Cozzi, A. D.; Herman, C. C.

    2012-10-22

    Several supplemental technologies for treating and immobilizing Hanford low activity waste (LAW) are being evaluated. One immobilization technology being considered is Fluidized Bed Steam Reforming (FBSR) which offers a low temperature (700-750?C) continuous method by which wastes high in organics, nitrates, sulfates/sulfides, or other aqueous components may be processed into a crystalline ceramic (mineral) waste form. The granular waste form produced by co-processing the waste with kaolin clay has been shown to be as durable as LAW glass. The FBSR granular product will be monolithed into a final waste form. The granular component is composed of insoluble sodium aluminosilicate (NAS) feldspathoid minerals such as sodalite. Production of the FBSR mineral product has been demonstrated both at the industrial, engineering, pilot, and laboratory scales on simulants. Radioactive testing at SRNL commenced in late 2010 to demonstrate the technology on radioactive LAW streams which is the focus of this study.

  2. Characterization and Leaching Tests of the Fluidized Bed Steam Reforming (FBSR) Waste Form for LAW Immobilization

    SciTech Connect (OSTI)

    Neeway, James J.; Qafoku, Nikolla; Brown, Christopher F.; Peterson, Reid A.

    2013-10-01

    Several supplemental technologies for treating and immobilizing Hanford low activity waste (LAW) have been evaluated. One such immobilization technology is the Fluidized Bed Steam Reforming (FBSR) granular product. The FBSR granular product is composed of insoluble sodium aluminosilicate (NAS) feldspathoid minerals. Production of the FBSR mineral product has been demonstrated both at the industrial and laboratory scale. Pacific Northwest National Laboratory (PNNL) was involved in an extensive characterization campaign. This goal of this campaign was study the durability of the FBSR mineral product and the mineral product encapsulated in a monolith to meet compressive strength requirements. This paper gives an overview of results obtained using the ASTM C 1285 Product Consistency Test (PCT), the EPA Test Method 1311 Toxicity Characteristic Leaching Procedure (TCLP), and the ASTMC 1662 Single-Pass Flow-Through (SPFT) test. Along with these durability tests an overview of the characteristics of the waste form has been collected using Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), microwave digestions for chemical composition, and surface area from Brunauer, Emmett, and Teller (BET) theory.

  3. RADIOACTIVE DEMONSTRATIONS OF FLUIDIZED BED STEAM REFORMING WITH ACUTAL HANFORD LOW ACTIVITY WASTES VERIFYING FBSR AS A SUPPLEMENTARY TREATMENT

    SciTech Connect (OSTI)

    Jantzen, C.; Crawford, C.; Burket, P.; Bannochie, C.; Daniel, G.; Nash, C.; Cozzi, A.; Herman, C.

    2012-01-12

    The U.S. Department of Energy's Office of River Protection is responsible for the retrieval, treatment, immobilization, and disposal of Hanford's tank waste. Currently there are approximately 56 million gallons of highly radioactive mixed wastes awaiting treatment. A key aspect of the River Protection Project cleanup mission is to construct and operate the Waste Treatment and Immobilization Plant (WTP). The WTP will separate the tank waste into high-level waste (HLW) and low-activity waste (LAW) fractions, both of which will subsequently be vitrified. The projected throughput capacity of the WTP LAW Vitrification Facility is insufficient to complete the cleanup mission in the time frame required by the Hanford Federal Facility Agreement and Consent Order, also known as the Tri-Party Agreement (TPA). Therefore, Supplemental Treatment is required both to meet the TPA treatment requirements as well as to more cost effectively complete the tank waste treatment mission. Fluidized Bed Steam Reforming (FBSR) is one of the supplementary treatments being considered. FBSR offers a moderate temperature (700-750 C) continuous method by which LAW and other secondary wastes can be processed irrespective of whether they contain organics, nitrates/nitrites, sulfates/sulfides, chlorides, fluorides, and/or radio-nuclides like I-129 and Tc-99. Radioactive testing of Savannah River LAW (Tank 50) shimmed to resemble Hanford LAW and actual Hanford LAW (SX-105 and AN-103) have produced a ceramic (mineral) waste form which is the same as the non-radioactive waste simulants tested at the engineering scale. The radioactive testing demonstrated that the FBSR process can retain the volatile radioactive components that cannot be contained at vitrification temperatures. The radioactive and nonradioactive mineral waste forms that were produced by co-processing waste with kaolin clay in an FBSR process are shown to be as durable as LAW glass.

  4. MINERALIZATION OF RADIOACTIVE WASTES BY FLUIDIZED BED STEAM REFORMING (FBSR): COMPARISONS TO VITREOUS WASTE FORMS, AND PERTINENT DURABILITY TESTING

    SciTech Connect (OSTI)

    Jantzen, C

    2008-12-26

    The Savannah River National Laboratory (SRNL) was requested to generate a document for the Washington State Department of Ecology and the U.S. Environmental Protection Agency that would cover the following topics: (1) A description of the mineral structures produced by Fluidized Bed Steam Reforming (FBSR) of Hanford type Low Activity Waste (LAW including LAWR which is LAW melter recycle waste) waste, especially the cage structured minerals and how they are formed. (2) How the cage structured minerals contain some contaminants, while others become part of the mineral structure (Note that all contaminants become part of the mineral structure and this will be described in the subsequent sections of this report). (3) Possible contaminant release mechanisms from the mineral structures. (4) Appropriate analyses to evaluate these release mechanisms. (5) Why the appropriate analyses are comparable to the existing Hanford glass dataset. In order to discuss the mineral structures and how they bond contaminants a brief description of the structures of both mineral (ceramic) and vitreous waste forms will be given to show their similarities. By demonstrating the similarities of mineral and vitreous waste forms on atomic level, the contaminant release mechanisms of the crystalline (mineral) and amorphous (glass) waste forms can be compared. This will then logically lead to the discussion of why many of the analyses used to evaluate vitreous waste forms and glass-ceramics (also known as glass composite materials) are appropriate for determining the release mechanisms of LAW/LAWR mineral waste forms and how the durability data on LAW/LAWR mineral waste forms relate to the durability data for LAW/LAWR glasses. The text will discuss the LAW mineral waste form made by FBSR. The nanoscale mechanism by which the minerals form will be also be described in the text. The appropriate analyses to evaluate contaminant release mechanisms will be discussed, as will the FBSR test results to date and how they compare to testing performed on LAW glasses. Other details about vitreous waste form durability and impacts of REDuction/OXidation (REDOX) on durability are given in Appendix A. Details about the FBSR process, various pilot scale demonstrations, and applications are given in Appendix B. Details describing all the different leach tests that need to be used jointly to determine the leaching mechanisms of a waste form are given in Appendix C. Cautions regarding the way in which the waste form surface area is measured and in the choice of leachant buffers (if used) are given in Appendix D.

  5. Fluidized Bed Steam Reforming (FBSR) Mineralization for High Organic and Nitrate Waste Streams for the Global Nuclear Energy Partnership (GNEP)

    SciTech Connect (OSTI)

    Jantzen, C.M.; Williams, M.R. [Savannah River National Laboratory, Aiken, SC (United States)

    2008-07-01

    Waste streams that may be generated by the Global Nuclear Energy Partnership (GNEP) Advanced Energy Initiative may contain significant quantities of organics (0-53 wt%) and/or nitrates (0-56 wt%). Decomposition of high nitrate streams requires reducing conditions, e.g. organic additives such as sugar or coal, to reduce the NOx in the off-gas to N{sub 2} to meet the Clean Air Act (CAA) standards during processing. Thus, organics will be present during waste form stabilization regardless of which GNEP processes are chosen, e.g. organics in the feed or organics for nitrate destruction. High organic containing wastes cannot be stabilized with the existing HLW Best Developed Available Technology (BDAT) which is HLW vitrification (HLVIT) unless the organics are removed by preprocessing. Alternative waste stabilization processes such as Fluidized Bed Steam Reforming (FBSR) operate at moderate temperatures (650-750 deg. C) compared to vitrification (1150-1300 deg. C). FBSR converts organics to CAA compliant gases, creates no secondary liquid waste streams, and creates a stable mineral waste form that is as durable as glass. For application to the high Cs-137 and Sr-90 containing GNEP waste streams a single phase mineralized Cs-mica phase was made by co-reacting illite clay and GNEP simulated waste. The Cs-mica accommodates up to 30% wt% Cs{sub 2}O and all the GNEP waste species, Ba, Sr, Rb including the Cs-137 transmutation to Ba-137. For reference, the cesium mineral pollucite (CsAlSi{sub 2}O{sub 6}), currently being studied for GNEP applications, can only be fabricated at {>=}1000 deg. C. Pollucite mineralization creates secondary aqueous waste streams and NOx. Pollucite is not tolerant of high concentrations of Ba, Sr or Rb and forces the divalent species into different mineral host phases. The pollucite can accommodate up to 33% wt% Cs{sub 2}O. (authors)

  6. Durability Testing of Fluidized Bed Steam Reforming Products

    SciTech Connect (OSTI)

    JANTZEN, CAROL M.; PAREIZS, JOHN M.; LORIER, TROY H.; MARRA, JAMES C.

    2005-07-01

    Fluidized Bed Steam Reforming (FBSR) is being considered as a potential technology for the immobilization of a wide variety of radioactive wastes but especially aqueous high sodium wastes at the Hanford site, at the Idaho National Laboratory (INL), and at the Savannah River Site (SRS). The FBSR technology converts organic compounds to CO{sub 2} and H{sub 2}O, converts nitrate/nitrite species to N{sub 2}, and produces a solid residue through reactions with superheated steam, the fluidizing media. If clay is added during processing a ''mineralized'' granular waste form can be produced. The mineral components of the waste form are primarily Na-Al-Si (NAS) feldspathoid minerals with cage-like and ring structures and iron bearing spinel minerals. The cage and ring structured minerals atomically bond radionuclides like Tc{sup 99} and Cs{sup 137} and anions such as SO{sub 4}, I, F, and Cl. The spinel minerals appear to stabilize Resource Conservation and Recovery Act (RCRA) hazardous species such as Cr and Ni. Durability testing of the FBSR products was performed using ASTM C1285 (Product Consistency Test) and the Environmental Protection Agency (EPA) Toxic Characteristic Leaching Procedure (TCLP). The FBSR mineral products (bed and fines) evaluated in this study were found to be two orders of magnitude more durable than the Hanford Low Activity Waste (LAW) glass requirement of 2 g/m{sup 2} release of Na{sup +}. The PCT responses for the FBSR samples tested were consistent with results from previous FBSR Hanford LAW product testing. Differences in the response can be explained by the minerals formed and their effects on PCT leachate chemistry.

  7. Radioactive Demonstration Of Mineralized Waste Forms Made From Hanford Low Activity Waste (Tank Farm Blend) By Fluidized Bed Steam Reformation (FBSR)

    SciTech Connect (OSTI)

    Jantzen, C. M.; Crawford, C. L.; Bannochie, C. J.; Burket, P. R.; Cozzi, A. D.; Daniel, W. E.; Hall, H. K.; Miller, D. H.; Missimer, D. M.; Nash, C. A.; Williams, M. F.

    2013-08-21

    The U.S. Department of Energy’s Office of River Protection (ORP) is responsible for the retrieval, treatment, immobilization, and disposal of Hanford’s tank waste. A key aspect of the River Protection Project (RPP) cleanup mission is to construct and operate the Hanford Tank Waste Treatment and Immobilization Plant (WTP). The WTP will separate the tank waste into high-level and low-activity waste (LAW) fractions, both of which will subsequently be vitrified. The projected throughput capacity of the WTP LAW Vitrification Facility is insufficient to complete the RPP mission in the time frame required by the Hanford Federal Facility Agreement and Consent Order, also known as the Tri-Party Agreement (TPA), i.e. December 31, 2047. Supplemental Treatment is likely to be required both to meet the TPA treatment requirements as well as to more cost effectively complete the tank waste treatment mission. The Supplemental Treatment chosen will immobilize that portion of the retrieved LAW that is not sent to the WTP’s LAW Vitrification facility into a solidified waste form. The solidified waste will then be disposed on the Hanford site in the Integrated Disposal Facility (IDF). Fluidized Bed Steam Reforming (FBSR) offers a moderate temperature (700-750°C) continuous method by which LAW can be processed irrespective of whether the waste contain organics, nitrates, sulfates/sulfides, chlorides, fluorides, volatile radionuclides or other aqueous components. The FBSR technology can process these wastes into a crystalline ceramic (mineral) waste form. The mineral waste form that is produced by co-processing waste with kaolin clay in an FBSR process has been shown to be comparable to LAW glass, i.e. leaches Tc-99, Re and Na at <2g/m2 during ASTM C1285 (Product Consistency) durability testing. Monolithing of the granular FBSR product was investigated to prevent dispersion during transport or burial/storage. Monolithing in an inorganic geopolymer binder, which is amorphous, macro-encapsulates the granules, and the monoliths pass ANSI/ANS 16.1 and ASTM C1308 durability testing with Re achieving a Leach Index (LI) of 9 (the Hanford Integrated Disposal Facility, IDF, criteria for Tc-99) after a few days and Na achieving an LI of >6 (the Hanford IDF criteria for Na) in the first few hours. The granular and monolithic waste forms also pass the EPA Toxicity Characteristic Leaching Procedure (TCLP) for all Resource Conservation and Recovery Act (RCRA) components at the Universal Treatment Standards (UTS). Two identical Benchscale Steam Reformers (BSR) were designed and constructed at SRNL, one to treat non-radioactive simulants and the other to treat actual radioactive wastes. The results from the non-radioactive BSR were used to determine the parameters needed to operate the radioactive BSR in order to confirm the findings of non-radioactive FBSR pilot scale and engineering scale tests and to qualify an FBSR LAW waste form for applications at Hanford. Radioactive testing commenced using SRS LAW from Tank 50 chemically trimmed to look like Hanford’s blended LAW known as the Rassat simulant as this simulant composition had been tested in the non-radioactive BSR, the non-radioactive pilot scale FBSR at the Science Applications International Corporation-Science and Technology Applications Research (SAIC-STAR) facility in Idaho Falls, ID and in the TTT Engineering Scale Technology Demonstration (ESTD) at Hazen Research Inc. (HRI) in Denver, CO. This provided a “tie back” between radioactive BSR testing and non-radioactive BSR, pilot scale, and engineering scale testing. Approximately six hundred grams of non-radioactive and radioactive BSR product were made for extensive testing and comparison to the non-radioactive pilot scale tests performed in 2004 at SAIC-STAR and the engineering scale test performed in 2008 at HRI with the Rassat simulant. The same mineral phases and off-gas species were found in the radioactive and non-radioactive testing. The granular ESTD and BSR products (radioactive and non-radioactive) were analyzed for to

  8. Radioactive Demonstration Of Mineralized Waste Forms Made From Hanford Low Activity Waste (Tank SX-105, Tank AN-103, And AZ-101/102) By Fluidized Bed Steam Reformation (FBSR)

    SciTech Connect (OSTI)

    Jantzen, C. M.; Crawford, C. L.; Bannochie, C. J.; Burket, P. R.; Cozzi, A. D.; Daniel, W. E.; Hall, H. K.; Miller, D. H.; Missimer, D. M.; Nash, C. A.; Williams, M. F.

    2013-09-18

    Fluidized Bed Steam Reforming (FBSR) is a robust technology for the immobilization of a wide variety of radioactive wastes. Applications have been tested at the pilot scale for the high sodium, sulfate, halide, organic and nitrate wastes at the Hanford site, the Idaho National Laboratory (INL), and the Savannah River Site (SRS). Due to the moderate processing temperatures, halides, sulfates, and technetium are retained in mineral phases of the feldspathoid family (nepheline, sodalite, nosean, carnegieite, etc). The feldspathoid minerals bind the contaminants such as Tc-99 in cage (sodalite, nosean) or ring (nepheline) structures to surrounding aluminosilicate tetrahedra in the feldspathoid structures. The granular FBSR mineral waste form that is produced has a comparable durability to LAW glass based on the short term PCT testing in this study, the INL studies, SPFT and PUF testing from previous studies as given in the columns in Table 1-3 that represent the various durability tests. Monolithing of the granular product was shown to be feasible in a separate study. Macro-encapsulating the granular product provides a decrease in leaching compared to the FBSR granular product when the geopolymer is correctly formulated.

  9. RADIOACTIVE DEMONSTRATION OF FINAL MINERALIZED WASTE FORMS FOR HANFORD WASTE TREATMENT PLANT SECONDARY WASTE (WTP-SW) BY FLUIDIZED BED STEAM REFORMING (FBSR) USING THE BENCH SCALE REFORMER PLATFORM

    SciTech Connect (OSTI)

    Crawford, C.; Burket, P.; Cozzi, A.; Daniel, G.; Jantzen, C.; Missimer, D.

    2014-08-21

    The U.S. Department of Energy’s Office of River Protection (ORP) is responsible for the retrieval, treatment, immobilization, and disposal of Hanford’s tank waste. Currently there are approximately 56 million gallons of highly radioactive mixed wastes awaiting treatment. A key aspect of the River Protection Project (RPP) cleanup mission is to construct and operate the Waste Treatment and Immobilization Plant (WTP). The WTP will separate the tank waste into high-level and low-activity waste (LAW) fractions, both of which will subsequently be vitrified. The projected throughput capacity of the WTP LAW Vitrification Facility is insufficient to complete the RPP mission in the time frame required by the Hanford Federal Facility Agreement and Consent Order, also known as the Tri-Party Agreement (TPA), i.e. December 31, 2047. Therefore, Supplemental Treatment is required both to meet the TPA treatment requirements as well as to more cost effectively complete the tank waste treatment mission. In addition, the WTP LAW vitrification facility off-gas condensate known as WTP Secondary Waste (WTP-SW) will be generated and enriched in volatile components such as {sup 137}Cs, {sup 129}I, {sup 99}Tc, Cl, F, and SO{sub 4} that volatilize at the vitrification temperature of 1150°C in the absence of a continuous cold cap (that could minimize volatilization). The current waste disposal path for the WTP-SW is to process it through the Effluent Treatment Facility (ETF). Fluidized Bed Steam Reforming (FBSR) is being considered for immobilization of the ETF concentrate that would be generated by processing the WTP-SW. The focus of this current report is the WTP-SW. FBSR offers a moderate temperature (700-750°C) continuous method by which WTP-SW wastes can be processed irrespective of whether they contain organics, nitrates, sulfates/sulfides, chlorides, fluorides, volatile radionuclides or other aqueous components. The FBSR technology can process these wastes into a crystalline ceramic (mineral) waste form. The mineral waste form that is produced by co-processing waste with kaolin clay in an FBSR process has been shown to be as durable as LAW glass. Monolithing of the granular FBSR product is being investigated to prevent dispersion during transport or burial/storage, but is not necessary for performance. A Benchscale Steam Reformer (BSR) was designed and constructed at the SRNL to treat actual radioactive wastes to confirm the findings of the non-radioactive FBSR pilot scale tests and to qualify the waste form for applications at Hanford. BSR testing with WTP SW waste surrogates and associated analytical analyses and tests of granular products (GP) and monoliths began in the Fall of 2009, and then was continued from the Fall of 2010 through the Spring of 2011. Radioactive testing commenced in 2010 with a demonstration of Hanford’s WTP-SW where Savannah River Site (SRS) High Level Waste (HLW) secondary waste from the Defense Waste Processing Facility (DWPF) was shimmed with a mixture of {sup 125/129}I and {sup 99}Tc to chemically resemble WTP-SW. Prior to these radioactive feed tests, non-radioactive simulants were also processed. Ninety six grams of radioactive granular product were made for testing and comparison to the non-radioactive pilot scale tests. The same mineral phases were found in the radioactive and non-radioactive testing. The granular products (both simulant and radioactive) were tested and a subset of the granular material (both simulant and radioactive) were stabilized in a geopolymer matrix. Extensive testing and characterization of the granular and monolith material were made including the following: ? ASTM C1285 (Product Consistency Test) testing of granular and monolith; ? ASTM C1308 accelerated leach testing of the radioactive monolith; ? ASTM C192 compression testing of monoliths; and ? EPA Method 1311 Toxicity Characteristic Leaching Procedure (TCLP) testing. The significant findings of the testing completed on simulant and radioactive WTP-SW are given below: ? Data indicates {sup 99}Tc, Re, Cs, and I

  10. FLUIDIZED BED STEAM REFORMED MINERAL WASTE FORMS: CHARACTERIZATION AND DURABILITY TESTING

    SciTech Connect (OSTI)

    Jantzen, C; Troy Lorier, T; John Pareizs, J; James Marra, J

    2006-12-06

    Fluidized Bed Steam Reforming (FBSR) is being considered as a potential technology for the immobilization of a wide variety of high sodium low activity wastes (LAW) such as those existing at the Hanford site, at the Idaho National Laboratory (INL), and the Savannah River Site (SRS). The addition of clay, charcoal, and a catalyst as co-reactants with the waste denitrates the aqueous wastes and forms a granular mineral waste form that can subsequently be made into a monolith for disposal if necessary. The waste form produced is a multiphase mineral assemblage of Na-Al-Si (NAS) feldspathoid minerals with cage and ring structures and iron bearing spinel minerals. The mineralization occurs at moderate temperatures between 650-750 C in the presence of superheated steam. The cage and ring structured feldspathoid minerals atomically bond radionuclides like Tc-99 and Cs-137 and anions such as SO{sub 4}, I, F, and Cl. The spinel minerals stabilize Resource Conservation and Recovery Act (RCRA) hazardous species such as Cr and Ni. Granular mineral waste forms were made from (1) a basic Hanford Envelope A low activity waste (LAW) simulant and (2) an acidic INL simulant commonly referred to as sodium bearing waste (SBW) in pilot scale facilities at the Science Applications International Corporation (SAIC) Science and Technology Applications Research (STAR) facility in Idaho Falls, ID. The FBSR waste forms were characterized and the durability tested via ASTM C1285 (Product Consistency Test), the Environmental Protection Agency (EPA) Toxic Characteristic Leaching Procedure (TCLP), and the Single Pass Flow Through (SPFT) test. The results of the SPFT testing and the activation energies for dissolution are discussed in this study.

  11. FLUIDIZED BED STEAM REFORMED MINERAL WASTE FORMS: CHARACTERIZATION AND DURABILITY TESTING

    SciTech Connect (OSTI)

    Jantzen, C; Troy Lorier, T; John Pareizs, J; James Marra, J

    2007-03-31

    Fluidized Bed Steam Reforming (FBSR) is being considered as a potential technology for the immobilization of a wide variety of high sodium low activity wastes (LAW) such as those existing at the Hanford site, at the Idaho National Laboratory (INL), and the Savannah River Site (SRS). The addition of clay, charcoal, and a catalyst as co-reactants with the waste denitrates the aqueous wastes and forms a granular mineral waste form that can subsequently be made into a monolith for disposal if necessary. The waste form produced is a multiphase mineral assemblage of Na-Al-Si (NAS) feldspathoid minerals with cage and ring structures and iron bearing spinel minerals. The mineralization occurs at moderate temperatures between 650-750 C in the presence of superheated steam. The cage and ring structured feldspathoid minerals atomically bond radionuclides like Tc-99 and Cs-137 and anions such as SO4, I, F, and Cl. The spinel minerals stabilize Resource Conservation and Recovery Act (RCRA) hazardous species such as Cr and Ni. Granular mineral waste forms were made from (1) a basic Hanford Envelope A low-activity waste (LAW) simulant and (2) an acidic INL simulant commonly referred to as sodium bearing waste (SBW) in pilot scale facilities at the Science Applications International Corporation (SAIC) Science and Technology Applications Research (STAR) facility in Idaho Falls, ID. The FBSR waste forms were characterized and the durability tested via ASTM C1285 (Product Consistency Test), the Environmental Protection Agency (EPA) Toxic Characteristic Leaching Procedure (TCLP), and the Single Pass Flow Through (SPFT) test. The results of the SPFT testing and the activation energies for dissolution are discussed in this study.

  12. SUMMARY PLAN FOR BENCH-SCALE REFORMER AND PRODUCT TESTING TREATABILITY STUDIES USING HANFORD TANK WASTE

    SciTech Connect (OSTI)

    DUNCAN JB

    2010-08-19

    This paper describes the sample selection, sample preparation, environmental, and regulatory considerations for shipment of Hanford radioactive waste samples for treatability studies of the FBSR process at the Savannah River National Laboratory and the Pacific Northwest National Laboratory. The U.S. Department of Energy (DOE) Hanford tank farms contain approximately 57 million gallons of wastes, most of which originated during the reprocessing of spent nuclear fuel to produce plutonium for defense purposes. DOE intends to pre-treat the tank waste to separate the waste into a high level fraction, that will be vitrified and disposed of in a national repository as high-level waste (HLW), and a low-activity waste (LAW) fraction that will be immobilized for on-site disposal at Hanford. The Hanford Waste Treatment and Immobilization Plant (WTP) is the focal point for the treatment of Hanford tank waste. However, the WTP lacks the capacity to process all of the LAW within the regulatory required timeframe. Consequently, a supplemental LAW immobilization process will be required to immobilize the remainder of the LAW. One promising supplemental technology is Fluidized Bed Steam Reforming (FBSR) to produce a sodium-alumino-silicate (NAS) waste form. The NAS waste form is primarily composed of nepheline (NaAlSiO{sub 4}), sodalite (Nas[AlSiO{sub 4}]{sub 6}Cl{sub 2}), and nosean (Na{sub 8}[AlSiO{sub 4}]{sub 6}SO{sub 4}). Semivolatile anions such as pertechnetate (TcO{sub 4}{sup -}) and volatiles such as iodine as iodide (I{sup -}) are expected to be entrapped within the mineral structures, thereby immobilizing them (Janzen 2008). Results from preliminary performance tests using surrogates, suggests that the release of semivolatile radionuclides {sup 99}Tc and volatile {sup 129}I from granular NAS waste form is limited by Nosean solubility. The predicted release of {sup 99}Tc from the NAS waste form at a 100 meters down gradient well from the Integrated Disposal Facility (IDF) was found to be comparable to immobilized low-activity waste glass waste form in the initial supplemental LAW treatment technology risk assessment (Mann 2003). To confirm this hypothesis, DOE is funding a treatability study where three actual Hanford tank waste samples (containing both {sup 99}Tc and {sup 125}I) will be processed in Savannah River National Laboratory's (SRNL) Bench-Scale Reformer (BSR) to form the mineral product, similar to the granular NAS waste form, that will then be subject to a number of waste form qualification tests. In previous tests, SRNL have demonstrated that the BSR product is chemically and physically equivalent to the FBSR product (Janzen 2005). The objective of this paper is to describe the sample selection, sample preparation, and environmental and regulatory considerations for treatability studies of the FBSR process using Hanford tank waste samples at the SNRL. The SNRL will process samples in its BSR. These samples will be decontaminated in the 222-S Laboratory to remove undissolved solids and selected radioisotopes to comply with Department of Transportation (DOT) shipping regulations and to ensure worker safety by limiting radiation exposure to As Low As Reasonably Achievable (ALARA). These decontamination levels will also meet the Nuclear Regulatory Commission's (NRC's) definition of low activity waste (LAW). After the SNRL has processed the tank samples to a granular mineral form, SRNL and Pacific Northwest National Laboratory (PNNL) will conduct waste form testing on both the granular material and monoliths prepared from the granular material. The tests being performed are outlined in Appendix A.

  13. Technology Maturation Plan (TMP) Fluidized Bed Steam Reforming (FBSR)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCEDInstallers/ContractorsPhotovoltaics »Tankless WaterEnergyJanuary28-982 DOE Hydrogen

  14. BENCH-SCALE STEAM REFORMING OF ACTUAL TANK 48H WASTE

    SciTech Connect (OSTI)

    Burket, P; Gene Daniel, G; Charles Nash, C; Carol Jantzen, C; Michael Williams, M

    2008-09-25

    Fluidized Bed Steam Reforming (FBSR) has been demonstrated to be a viable technology to remove >99% of the organics from Tank 48H simulant, to remove >99% of the nitrate/nitrite from Tank 48H simulant, and to form a solid product that is primarily carbonate based. The technology was demonstrated in October of 2006 in the Engineering Scale Test Demonstration Fluidized Bed Steam Reformer1 (ESTD FBSR) at the Hazen Research Inc. (HRI) facility in Golden, CO. The purpose of the Bench-scale Steam Reformer (BSR) testing was to demonstrate that the same reactions occur and the same product is formed when steam reforming actual radioactive Tank 48H waste. The approach used in the current study was to test the BSR with the same Tank 48H simulant and same Erwin coal as was used at the ESTD FBSR under the same operating conditions. This comparison would allow verification that the same chemical reactions occur in both the BSR and ESTD FBSR. Then, actual radioactive Tank 48H material would be steam reformed in the BSR to verify that the actual tank 48H sample reacts the same way chemically as the simulant Tank 48H material. The conclusions from the BSR study and comparison to the ESTD FBSR are the following: (1) A Bench-scale Steam Reforming (BSR) unit was successfully designed and built that: (a) Emulated the chemistry of the ESTD FBSR Denitration Mineralization Reformer (DMR) and Carbon Reduction Reformer (CRR) known collectively as the dual reformer flowsheet. (b) Measured and controlled the off-gas stream. (c) Processed real (radioactive) Tank 48H waste. (d) Met the standards and specifications for radiological testing in the Savannah River National Laboratory (SRNL) Shielded Cells Facility (SCF). (2) Three runs with radioactive Tank 48H material were performed. (3) The Tetraphenylborate (TPB) was destroyed to > 99% for all radioactive Bench-scale tests. (4) The feed nitrate/nitrite was destroyed to >99% for all radioactive BSR tests the same as the ESTD FBSR. (5) The radioactive Tank 48H DMR product was primarily made up of soluble carbonates. The three most abundant species were thermonatrite, [Na{sub 2}CO{sub 3} {center_dot} H{sub 2}O], sodium carbonate, [Na{sub 2}CO{sub 3}], and trona, [Na{sub 3}H(CO{sub 3}){sub 2} {center_dot} 2H{sub 2}O] the same as the ESTD FBSR. (6) Insoluble solids analyzed by X-Ray Diffraction (XRD) did not detect insoluble carbonate species. However, they still may be present at levels below 2 wt%, the sensitivity of the XRD methodology. Insoluble solids XRD characterization indicated that various Fe/Ni/Cr/Mn phases are present. These crystalline phases are associated with the insoluble sludge components of Tank 48H slurry and impurities in the Erwin coal ash. The percent insoluble solids, which mainly consist of un-burnt coal and coal ash, in the products were 4 to 11 wt% for the radioactive runs. (7) The Fe{sup +2}/Fe{sub total} REDOX measurements ranged from 0.58 to 1 for the three radioactive Bench-scale tests. REDOX measurements > 0.5 showed a reducing atmosphere was maintained in the DMR indicating that pyrolysis was occurring. (8) Greater than 90% of the radioactivity was captured in the product for all three runs. (9) The collective results from the FBSR simulant tests and the BSR simulant tests indicate that the same chemistry occurs in the two reactors. (10) The collective results from the BSR simulant runs and the BSR radioactive waste runs indicates that the same chemistry occurs in the simulant as in the real waste. The FBSR technology has been proven to destroy the organics and nitrates in the Tank 48H waste and form the anticipated solid carbonate phases as expected.

  15. Steam Reforming, 6-in. Bench-Scale Design and Testing Project -- Technical and Functional Requirements Description

    SciTech Connect (OSTI)

    Losinski, Sylvester John; Marshall, Douglas William

    2002-08-01

    Feasibility studies and technology development work are currently being performed on several processes to treat radioactive liquids and solids currently stored at the Idaho Nuclear Technology and Engineering Center (INTEC), located within the Idaho National Engineering and Environmental Laboratory (INEEL). These studies and development work will be used to select a treatment process for treatment of the radioactive liquids and solids to meet treatment milestones of the Settlement Agreement between the Department of Energy and the State of Idaho. One process under consideration for treating the radioactive liquids and solids, specifically Sodium-Bearing Waste (SBW) and tank heel solids, is fluid bed steam reforming (FBSR). To support both feasibility and development studies a bench-scale FBSR is being designed and constructed. This report presents the technical and functional requirements, experimental objectives, process flow sheets, and equipment specifications for the bench-scale FBSR.

  16. Radioactive Demonstration Of Mineralized Waste Forms Made From Hanford Low Activity Waste (Tank SX-105 And AN-103) By Fluidized Bed Steam Reformation

    SciTech Connect (OSTI)

    Jantzen, Carol; Herman, Connie; Crawford, Charles; Bannochie, Christopher; Burket, Paul; Daniel, Gene; Cozzi, Alex; Nash, Charles; Miller, Donald; Missimer, David

    2014-01-10

    One of the immobilization technologies under consideration as a Supplemental Treatment for Hanford’s Low Activity Waste (LAW) is Fluidized Bed Steam Reforming (FBSR). The FBSR technology forms a mineral waste form at moderate processing temperatures thus retaining and atomically bonding the halides, sulfates, and technetium in the mineral phases (nepheline, sodalite, nosean, carnegieite). Additions of kaolin clay are used instead of glass formers and the minerals formed by the FBSR technology offers (1) atomic bonding of the radionuclides and constituents of concern (COC) comparable to glass, (2) short and long term durability comparable to glass, (3) disposal volumes comparable to glass, and (4) higher Na2O and SO{sub 4} waste loadings than glass. The higher FBSR Na{sub 2}O and SO{sub 4} waste loadings contribute to the low disposal volumes but also provide for more rapid processing of the LAW. Recent FBSR processing and testing of Hanford radioactive LAW (Tank SX-105 and AN-103) waste is reported and compared to previous radioactive and non-radioactive LAW processing and testing.

  17. Radionuclide and contaminant immobilization in the fluidized bed steam reforming waste products

    SciTech Connect (OSTI)

    Neeway, James J.; Qafoku, Nikolla; Westsik, Joseph H.; Brown, Christopher F.; Jantzen, Carol; Pierce, Eric M.

    2012-05-01

    The goal of this chapter is to introduce the reader to the Fluidized Bed Steam Reforming (FBSR) process and resulting waste form. The first section of the chapter gives an overview of the potential need for FBSR processing in nuclear waste remediation followed by an overview of the engineering involved in the process itself. This is followed by a description of waste form production at a chemical level followed by a section describing different process streams that have undergone the FBSR process. The third section describes the resulting mineral product in terms of phases that are present and the ability of the waste form to encapsulate hazardous and radioactive wastes from several sources. Following this description is a presentation of the physical properties of the granular and monolith waste form product including and contaminant release mechanisms. The last section gives a brief summary of this chapter and includes a section on the strengths associated with this waste form and the needs for additional data and remaining questions yet to be answered. The reader is directed elsewhere for more information on other waste forms such as Cast Stone (Lockrem, 2005), Ceramicrete (Singh et al., 1997, Wagh et al., 1999) and geopolymers (Kyritsis et al., 2009; Russell et al., 2006).

  18. CESIUM REMOVAL FROM TANKS 241-AN-103 & 241-SX-105 & 241-AZ-101 & 241AZ-102 COMPOSITE FOR TESTING IN BENCH SCALE STEAM REFORMER

    SciTech Connect (OSTI)

    DUNCAN JB; HUBER HJ

    2011-04-21

    This report documents the preparation of three actual Hanford tank waste samples for shipment to the Savannah River National Laboratory (SRNL). Two of the samples were dissolved saltcakes from tank 241-AN-103 (hereafter AN-103) and tank 241-SX-105 (hereafter SX-105); one sample was a supernate composite from tanks 241-AZ-101 and 241-AZ-102 (hereafter AZ-101/102). The preparation of the samples was executed following the test plans LAB-PLAN-10-00006, Test Plan for the Preparation of Samples from Hanford Tanks 241-SX-105, 241-AN-103, 241-AN-107, and LAB-PLN-l0-00014, Test Plan for the Preparation of a Composite Sample from Hanford Tanks 241-AZ-101 and 241-AZ-102 for Steam Reformer Testing at the Savannah River National Laboratory. All procedural steps were recorded in laboratory notebook HNF-N-274 3. Sample breakdown diagrams for AN-103 and SX-105 are presented in Appendix A. The tank samples were prepared in support of a series of treatability studies of the Fluidized Bed Steam Reforming (FBSR) process using a Bench-Scale Reformer (BSR) at SRNL. Tests with simulants have shown that the FBSR mineralized waste form is comparable to low-activity waste glass with respect to environmental durability (WSRC-STI-2008-00268, Mineralization of Radioactive Wastes by Fluidized Bed Steam Reforming (FBSR): Comparisons to Vitreous Waste Forms and Pertinent Durability Testing). However, a rigorous assessment requires long-term performance data from FBSR product formed from actual Hanford tank waste. Washington River Protection Solutions, LLC (WRPS) has initiated a Waste Form Qualification Program (WP-5.2.1-2010-001, Fluidized Bed Steam Reformer Low-level Waste Form Qualification) to gather the data required to demonstrate that an adequate FBSR mineralized waste form can be produced. The documentation of the selection process of the three tank samples has been separately reported in RPP-48824, Sample Selection Process for Bench-Scale Steam Reforming Treatability Studies Using Hanford Waste Samples.

  19. 2009 PILOT SCALE FLUIDIZED BED STEAM REFORMING TESTING USING THE THOR (THERMAL ORGANIC REDUCTION) PROCESS: ANALYTICAL RESULTS FOR TANK 48H ORGANIC DESTRUCTION - 10408

    SciTech Connect (OSTI)

    Williams, M.; Jantzen, C.; Burket, P.; Crawford, C.; Daniel, G.; Aponte, C.; Johnson, C.

    2009-12-28

    The Savannah River Site (SRS) must empty the contents of Tank 48H, a 1.3 million gallon Type IIIA HLW storage tank, to return this tank to service. The tank contains organic compounds, mainly potassium tetraphenylborate that cannot be processed downstream until the organic components are destroyed. The THOR{reg_sign} Treatment Technologies (TTT) Fluidized Bed Steam Reforming (FBSR) technology, herein after referred to as steam reforming, has been demonstrated to be a viable process to remove greater than 99.9% of the organics from Tank 48H during various bench scale and pilot scale tests. These demonstrations were supported by Savannah River Remediation (SRR) and the Department of Energy (DOE) has concurred with the SRR recommendation to proceed with the deployment of the FBSR technology to treat the contents of Tank 48H. The Savannah River National Laboratory (SRNL) developed and proved the concept with non-radioactive simulants for SRR beginning in 2003. By 2008, several pilot scale campaigns had been completed and extensive crucible testing and bench scale testing were performed in the SRNL Shielded Cells using Tank 48H radioactive sample. SRNL developed a Tank 48H non-radioactive simulant complete with organic compounds, salt, and metals characteristic of those measured in a sample of the radioactive contents of Tank 48H. FBSR Pilot Scaled Testing with the Tank 48H simulant has demonstrated the ability to remove greater than 98% of the nitrites and greater than 99.5% of the nitrates from the Tank 48H simulant, and to form a solid product that is primarily alkali carbonate. The alkali carbonate is soluble and, thus, amenable to pumping as a liquid to downstream facilities for processing. The FBSR technology was demonstrated in October of 2006 in the Engineering Scale Test Demonstration (ESTD) pilot scale steam reformer at the Hazen Research Inc. (HRI) facility in Golden, CO. Additional ESTD tests were completed in 2008 and in 2009 that further demonstrated the TTT steam reforming process ability to destroy organics in the Tank 48 simulant and produce a soluble carbonate waste form. The ESTD was operated at varying feed rates and Denitration and Mineralization Reformer (DMR) temperatures, and at a constant Carbon Reduction Reformer (CRR) temperature of 950 C. The process produced a dissolvable carbonate product suitable for processing downstream. ESTD testing was performed in 2009 at the Hazen facility to demonstrate the long term operability of an integrated FBSR processing system with carbonate product and carbonate slurry handling capability. The final testing demonstrated the integrated TTT FBSR capability to process the Tank 48 simulant from a slurry feed into a greater than 99.9% organic free and primarily dissolved carbonate FBSR product slurry. This paper will discuss the SRNL analytical results of samples analyzed from the 2008 and 2009 THOR{reg_sign} steam reforming ESTD performed with Tank 48H simulant at HRI in Golden, Colorado. The final analytical results will be compared to prior analytical results from samples in terms of organic, nitrite, and nitrate destruction.

  20. FLUIDIZED BED STEAM REFORMING ENABLING ORGANIC HIGH LEVEL WASTE DISPOSAL

    SciTech Connect (OSTI)

    Williams, M

    2008-05-09

    Waste streams planned for generation by the Global Nuclear Energy Partnership (GNEP) and existing radioactive High Level Waste (HLW) streams containing organic compounds such as the Tank 48H waste stream at Savannah River Site have completed simulant and radioactive testing, respectfully, by Savannah River National Laboratory (SRNL). GNEP waste streams will include up to 53 wt% organic compounds and nitrates up to 56 wt%. Decomposition of high nitrate streams requires reducing conditions, e.g. provided by organic additives such as sugar or coal, to reduce NOX in the off-gas to N2 to meet Clean Air Act (CAA) standards during processing. Thus, organics will be present during the waste form stabilization process regardless of the GNEP processes utilized and exists in some of the high level radioactive waste tanks at Savannah River Site and Hanford Tank Farms, e.g. organics in the feed or organics used for nitrate destruction. Waste streams containing high organic concentrations cannot be stabilized with the existing HLW Best Developed Available Technology (BDAT) which is HLW vitrification (HLVIT) unless the organics are removed by pretreatment. The alternative waste stabilization pretreatment process of Fluidized Bed Steam Reforming (FBSR) operates at moderate temperatures (650-750 C) compared to vitrification (1150-1300 C). The FBSR process has been demonstrated on GNEP simulated waste and radioactive waste containing high organics from Tank 48H to convert organics to CAA compliant gases, create no secondary liquid waste streams and create a stable mineral waste form.

  1. CESIUM REMOVAL FROM TANKS 241-AN-103 & 241-SX-105 & 241-AZ-101/102 COMPOSITE FOR TESTING IN BENCH SCALE STEAM REFORMER

    SciTech Connect (OSTI)

    DUNCAN JB; HUBER HJ

    2011-06-08

    This report documents the preparation of three actual Hanford tank waste samples for shipment to the Savannah River National Laboratory (SRNL). Two of the samples were dissolved saltcakes from tank 241-AN-103 (hereafter AN-103) and tank 241-SX-105 (hereafter SX-105); one sample was a supernate composite from tanks 241-AZ-101 and 241-AZ-102 (hereafter AZ-101/102). The preparation of the samples was executed following the test plans LAB-PLAN-10-00006, Test Plan for the Preparation of Samples from Hanford Tanks 241-SX-105, 241-AN-103, 241-AN-107, and LAB-PLN-10-00014, Test Plan for the Preparation of a Composite Sample from Hanford Tanks 241-AZ-101 and 241-AZ-102 for Steam Reformer Testing at the Savannah River National Laboratory. All procedural steps were recorded in laboratory notebook HNF-N-274 3. Sample breakdown diagrams for AN-103 and SX-105 are presented in Appendix A. The tank samples were prepared in support of a series of treatability studies of the Fluidized Bed Steam Reforming (FBSR) process using a Bench-Scale Reformer (BSR) at SRNL. Tests with simulants have shown that the FBSR mineralized waste form is comparable to low-activity waste glass with respect to environmental durability (WSRC-STI-2008-00268, Mineralization of Radioactive Wastes by Fluidized Bed Steam Reforming (FBSR): Comparisons to Vitreous Waste Forms and Pertinent Durability Testing). However, a rigorous assessment requires long-term performance data from FB SR product formed from actual Hanford tank waste. Washington River Protection Solutions, LLC (WRPS) has initiated a Waste Form Qualification Program (WP-S.2.1-20 1 0-00 1, Fluidized Bed Steam Reformer Low-level Waste Form Qualification) to gather the data required to demonstrate that an adequate FBSR mineralized waste form can be produced. The documentation of the selection process of the three tank samples has been separately reported in RPP-48824, 'Sample Selection Process for Bench-Scale Steam Reforming Treatability Studies Using Hanford Waste Samples.'

  2. RADIOACTIVE DEMONSTRATION OF FINAL MINERALIZED WASTE FORMS FOR HANFORD WASTE TREATMENT PLANT SECONDARY WASTE BY FLUIDIZED BED STEAM REFORMING USING THE BENCH SCALE REFORMER PLATFORM

    SciTech Connect (OSTI)

    Crawford, C.; Burket, P.; Cozzi, A.; Daniel, W.; Jantzen, C.; Missimer, D.

    2012-02-02

    The U.S. Department of Energy's Office of River Protection (ORP) is responsible for the retrieval, treatment, immobilization, and disposal of Hanford's tank waste. Currently there are approximately 56 million gallons of highly radioactive mixed wastes awaiting treatment. A key aspect of the River Protection Project (RPP) cleanup mission is to construct and operate the Waste Treatment and Immobilization Plant (WTP). The WTP will separate the tank waste into high-level and low-activity waste (LAW) fractions, both of which will subsequently be vitrified. The projected throughput capacity of the WTP LAW Vitrification Facility is insufficient to complete the RPP mission in the time frame required by the Hanford Federal Facility Agreement and Consent Order, also known as the Tri-Party Agreement (TPA), i.e. December 31, 2047. Therefore, Supplemental Treatment is required both to meet the TPA treatment requirements as well as to more cost effectively complete the tank waste treatment mission. In addition, the WTP LAW vitrification facility off-gas condensate known as WTP Secondary Waste (WTP-SW) will be generated and enriched in volatile components such as {sup 137}Cs, {sup 129}I, {sup 99}Tc, Cl, F, and SO{sub 4} that volatilize at the vitrification temperature of 1150 C in the absence of a continuous cold cap (that could minimize volatilization). The current waste disposal path for the WTP-SW is to process it through the Effluent Treatment Facility (ETF). Fluidized Bed Steam Reforming (FBSR) is being considered for immobilization of the ETF concentrate that would be generated by processing the WTP-SW. The focus of this current report is the WTP-SW. FBSR offers a moderate temperature (700-750 C) continuous method by which WTP-SW wastes can be processed irrespective of whether they contain organics, nitrates, sulfates/sulfides, chlorides, fluorides, volatile radionuclides or other aqueous components. The FBSR technology can process these wastes into a crystalline ceramic (mineral) waste form. The mineral waste form that is produced by co-processing waste with kaolin clay in an FBSR process has been shown to be as durable as LAW glass. Monolithing of the granular FBSR product is being investigated to prevent dispersion during transport or burial/storage, but is not necessary for performance. A Benchscale Steam Reformer (BSR) was designed and constructed at the SRNL to treat actual radioactive wastes to confirm the findings of the non-radioactive FBSR pilot scale tests and to qualify the waste form for applications at Hanford. BSR testing with WTP SW waste surrogates and associated analytical analyses and tests of granular products (GP) and monoliths began in the Fall of 2009, and then was continued from the Fall of 2010 through the Spring of 2011. Radioactive testing commenced in 2010 with a demonstration of Hanford's WTP-SW where Savannah River Site (SRS) High Level Waste (HLW) secondary waste from the Defense Waste Processing Facility (DWPF) was shimmed with a mixture of {sup 125/129}I and {sup 99}Tc to chemically resemble WTP-SW. Prior to these radioactive feed tests, non-radioactive simulants were also processed. Ninety six grams of radioactive granular product were made for testing and comparison to the non-radioactive pilot scale tests. The same mineral phases were found in the radioactive and non-radioactive testing.

  3. Ritterschaft & Reformation

    E-Print Network [OSTI]

    Kallenrode, May-Britt

    Ritterschaft & Reformation Renaissancesaal im Ledenhof 23. und 24. Oktober 2014 Osnabrückgefördert deutsche Reformation in Böhmen und Mähren (1520-1620) Dr. Josef Hrdlicka, Ceské Budjovice 10:30 Kaffeepause. Olga Weckenbrock, Osnabrück 11:45 Die Bedeutung der Reichsritterschaft für Reformation und

  4. STEAM REFORMING TECHNOLOGY DEMONSTRATION FOR THE DESTRUCTION OF ORGANICS ON ACTUAL DOE SAVANNAH RIVER SITE TANK 48H WASTE 9138

    SciTech Connect (OSTI)

    Burket, P

    2009-02-24

    This paper describes the design of the Bench-scale Steam Reformer (BSR); a processing unit for demonstrating steam reforming technology on actual radioactive waste [1]. It describes the operating conditions of the unit used for processing a sample of Savannah River Site (SRS) Tank 48H waste. Finally, it compares the results from processing the actual waste in the BSR to processing simulant waste in the BSR to processing simulant waste in a large pilot scale unit, the Fluidized Bed Steam Reformer (FBSR), operated at Hazen Research Inc. in Golden, CO. The purpose of this work was to prove that the actual waste reacted in the same manner as the simulant waste in order to validate the work performed in the pilot scale unit which could only use simulant waste.

  5. Performance of the Fluidized Bed Steam Reforming Product Under Hydraulically Unsaturated Conditions

    SciTech Connect (OSTI)

    Neeway, James J.; Qafoku, Nikolla; Williams, Benjamin D.; Rod, Kenton A.; Bowden, Mark E.; Brown, Christopher F.; Pierce, Eric M.

    2014-05-01

    Currently, several candidates for secondary waste immobilization at the Hanford site in the State of Washington, USA are being considered. To demonstrate the durability of the product in the unsaturated Integrated Disposal Facility (IDF) at the site, a series of tests have been performed one of the candidate materials using the Pressurized Unsaturated Flow (PUF) system. The material that was tested was the Fluidized Bed Steam Reformer (FBSR) granular product and the granular product encapsulated in a geopolymer matrix. The FBSR product is composed primarily of an insoluble sodium aluminosilicate matrix with the dominant phases being feldspathoid minerals mostly nepheline, sodalite, and nosean. The PUF test method allows for the accelerated weathering of materials, including radioactive waste forms, under hydraulically unsaturated conditions, thus mimicking the open-flow and transport properties that most likely will be present at the IDF. The experiments show a trend of decreasing tracer release as a function of time for several of the elements released from the material including Na, Si, Al, and Cs. However, some of the elements, notably I and Re, show a steady release throughout the yearlong test. This result suggests that the release of these minerals from the sodalite cage occurs at a different rate compared with the dissolution of the predominant nepheline phase.

  6. Acquisition Reform

    E-Print Network [OSTI]

    Sapolsky, Harvey

    This report reviews the six most recent major acquisition reform reports, starting in 1949 with the Hoover Commissions and including McNamara's Total Package Procurement, Fitzhugh Commission, the Commission on Government ...

  7. Slab reformer

    DOE Patents [OSTI]

    Spurrier, F.R.; DeZubay, E.A.; Murray, A.P.; Vidt, E.J.

    1984-02-07

    Slab-shaped high efficiency catalytic reformer configurations are disclosed particularly useful for generation of fuels to be used in fuel cell based generation systems. A plurality of structures forming a generally rectangular peripheral envelope are spaced about one another to form annular regions, an interior annular region containing a catalytic bed and being regeneratively heated on one side by a hot combustion gas and on the other side by the gaseous products of the reformation. An integrally mounted combustor is cooled by impingement of incoming oxidant. 14 figs.

  8. Slab reformer

    DOE Patents [OSTI]

    Spurrier, Francis R. (Whitehall, PA); DeZubay, Egon A. (Mt. Lebanon, PA); Murray, Alexander P. (Murrysville, PA); Vidt, Edward J. (Churchill, PA)

    1985-03-12

    Slab-shaped high efficiency catalytic reformer configurations particularly useful for generation of fuels to be used in fuel cell based generation systems. A plurality of structures forming a generally rectangular peripheral envelope are spaced about one another to form annular regions, an interior annular region containing a catalytic bed and being regeneratively heated on one side by a hot combustion gas and on the other side by the gaseous products of the reformation. An integrally mounted combustor is cooled by impingement of incoming oxidant.

  9. Slab reformer

    DOE Patents [OSTI]

    Spurrier, Francis R. (Whitehall, PA); DeZubay, Egon A. (Mt. Lebanon, PA); Murray, Alexander P. (Murrysville, PA); Vidt, Edward J. (Churchill, PA)

    1984-02-07

    Slab-shaped high efficiency catalytic reformer configurations particularly useful for generation of fuels to be used in fuel cell based generation systems. A plurality of structures forming a generally rectangular peripheral envelope are spaced about one another to form annular regions, an interior annular region containing a catalytic bed and being regeneratively heated on one side by a hot comubstion gas and on the other side by the gaseous products of the reformation. An integrally mounted combustor is cooled by impingement of incoming oxidant.

  10. RADIOACTIVE DEMONSTRATIONS OF FLUIDIZED BED STEAM REFORMING AS A SUPPLEMENTARY TREATMENT FOR HANFORD'S LOW ACTIVITY WASTE AND SECONDARY WASTES

    SciTech Connect (OSTI)

    Jantzen, C.; Crawford, C.; Cozzi, A.; Bannochie, C.; Burket, P.; Daniel, G.

    2011-02-24

    The U.S. Department of Energy's Office of River Protection (ORP) is responsible for the retrieval, treatment, immobilization, and disposal of Hanford's tank waste. Currently there are approximately 56 million gallons of highly radioactive mixed wastes awaiting treatment. A key aspect of the River Protection Project (RPP) cleanup mission is to construct and operate the Waste Treatment and Immobilization Plant (WTP). The WTP will separate the tank waste into high-level and low-activity waste (LAW) fractions, both of which will subsequently be vitrified. The projected throughput capacity of the WTP LAW Vitrification Facility is insufficient to complete the RPP mission in the time frame required by the Hanford Federal Facility Agreement and Consent Order, also known as the Tri-Party Agreement (TPA), i.e. December 31, 2047. Therefore, Supplemental Treatment is required both to meet the TPA treatment requirements as well as to more cost effectively complete the tank waste treatment mission. The Supplemental Treatment chosen will immobilize that portion of the retrieved LAW that is not sent to the WTP's LAW Vitrification facility into a solidified waste form. The solidified waste will then be disposed on the Hanford site in the Integrated Disposal Facility (IDF). In addition, the WTP LAW vitrification facility off-gas condensate known as WTP Secondary Waste (WTP-SW) will be generated and enriched in volatile components such as Cs-137, I-129, Tc-99, Cl, F, and SO4 that volatilize at the vitrification temperature of 1150 C in the absence of a continuous cold cap. The current waste disposal path for the WTP-SW is to recycle it to the supplemental LAW treatment to avoid a large steady state accumulation in the pretreatment-vitrification loop. Fluidized Bed Steam Reforming (FBSR) offers a moderate temperature (700-750 C) continuous method by which LAW and/or WTP-SW wastes can be processed irrespective of whether they contain organics, nitrates, sulfates/sulfides, chlorides, fluorides, volatile radionuclides or other aqueous components. The FBSR technology can process these wastes into a crystalline ceramic (mineral) waste form. The mineral waste form that is produced by co-processing waste with kaolin clay in an FBSR process has been shown to be as durable as LAW glass. Monolithing of the granular FBSR product is being investigated to prevent dispersion during transport or burial/storage but is not necessary for performance. A Benchscale Steam Reformer (BSR) was designed and constructed at the Savannah River National Laboratory (SRNL) to treat actual radioactive wastes to confirm the findings of the non-radioactive FBSR pilot scale tests and to qualify the waste form for applications at Hanford. Radioactive testing commenced in 2010 with a demonstration of Hanford's WTP-SW where Savannah River Site (SRS) High Level Waste (HLW) secondary waste from the Defense Waste Processing Facility (DWPF) was shimmed with a mixture of I-125/129 and Tc-99 to chemically resemble WTP-SW. Ninety six grams of radioactive product were made for testing. The second campaign commenced using SRS LAW chemically trimmed to look like Hanford's LAW. Six hundred grams of radioactive product were made for extensive testing and comparison to the non-radioactive pilot scale tests. The same mineral phases were found in the radioactive and non-radioactive testing.

  11. Immigration Reform: 1986 & Today

    E-Print Network [OSTI]

    Woods, Gregory

    2013-01-01

    voice has  forced immigration reform back to the  political known as the Immigration Reform and Control Act of 1986 (

  12. Fluidized bed steam reformed mineral waste form performance testing to support Hanford Supplemental Low Activity Waste Immobilization Technology Selection

    SciTech Connect (OSTI)

    Jantzen, C. M.; Pierce, E. M.; Bannochie, C. J.; Burket, P. R.; Cozzi, A. D.; Crawford, C. L.; Daniel, W. E.; Fox, K. M.; Herman, C. C.; Miller, D. H.; Missimer, D. M.; Nash, C. A.; Williams, M. F.; Brown, C. F.; Qafoku, N. P.; Neeway, J. J.; Valenta, M. M.; Gill, G. A.; Swanberg, D. J.; Robbins, R. A.; Thompson, L. E.

    2015-10-01

    This report describes the benchscale testing with simulant and radioactive Hanford Tank Blends, mineral product characterization and testing, and monolith testing and characterization. These projects were funded by DOE EM-31 Technology Development & Deployment (TDD) Program Technical Task Plan WP-5.2.1-2010-001 and are entitled “Fluidized Bed Steam Reformer Low-Level Waste Form Qualification”, Inter-Entity Work Order (IEWO) M0SRV00054 with Washington River Protection Solutions (WRPS) entitled “Fluidized Bed Steam Reforming Treatability Studies Using Savannah River Site (SRS) Low Activity Waste and Hanford Low Activity Waste Tank Samples”, and IEWO M0SRV00080, “Fluidized Bed Steam Reforming Waste Form Qualification Testing Using SRS Low Activity Waste and Hanford Low Activity Waste Tank Samples”. This was a multi-organizational program that included Savannah River National Laboratory (SRNL), THOR® Treatment Technologies (TTT), Pacific Northwest National Laboratory (PNNL), Oak Ridge National Laboratory (ORNL), Office of River Protection (ORP), and Washington River Protection Solutions (WRPS). The SRNL testing of the non-radioactive pilot-scale Fluidized Bed Steam Reformer (FBSR) products made by TTT, subsequent SRNL monolith formulation and testing and studies of these products, and SRNL Waste Treatment Plant Secondary Waste (WTP-SW) radioactive campaign were funded by DOE Advanced Remediation Technologies (ART) Phase 2 Project in connection with a Work-For-Others (WFO) between SRNL and TTT.

  13. Preliminary Thoughts on Copyright Reform

    E-Print Network [OSTI]

    Samuelson, Pamela

    2007-01-01

    Thoughts on Copyright Reform by Pamela Samuelson * Myriadfor undertaking a copyright reform project. For one thing,product of a copyright reform process that was initiated in

  14. TISSINTITE, (Ca,Na,)AlSi2O6: A SHOCK-INDUCED CLINOPYROXENE IN THE TISSINT METEORITE.

    E-Print Network [OSTI]

    Rossman. George R.

    of silica. In general, the rarity of vacancy-rich cpx in high-pressure terrestrial rocks likely reflects], the kinetics of nucleation and growth of tissintite are slower for more sodic plag, so tissintite is most

  15. FLUIDIZED BED STEAM REFORMING MINERALIZATION FOR HIGH ORGANIC AND NITRATE WASTE STREAMS FOR THE GLOBAL NUCLEAR ENERGY PARTNERSHIP

    SciTech Connect (OSTI)

    Jantzen, C; Michael Williams, M

    2008-01-11

    Waste streams that may be generated by the Global Nuclear Energy Partnership (GNEP) Advanced Energy Initiative may contain significant quantities of organics (0-53 wt%) and/or nitrates (0-56 wt%). Decomposition of high nitrate streams requires reducing conditions, e.g. organic additives such as sugar or coal, to reduce the NO{sub x} in the off-gas to N{sub 2} to meet the Clean Air Act (CAA) standards during processing. Thus, organics will be present during waste form stabilization regardless of which GNEP processes are chosen, e.g. organics in the feed or organics for nitrate destruction. High organic containing wastes cannot be stabilized with the existing HLW Best Developed Available Technology (BDAT) which is HLW vitrification (HLVIT) unless the organics are removed by preprocessing. Alternative waste stabilization processes such as Fluidized Bed Steam Reforming (FBSR) operate at moderate temperatures (650-750 C) compared to vitrification (1150-1300 C). FBSR converts organics to CAA compliant gases, creates no secondary liquid waste streams, and creates a stable mineral waste form that is as durable as glass. For application to the high Cs-137 and Sr-90 containing GNEP waste streams a single phase mineralized Cs-mica phase was made by co-reacting illite clay and GNEP simulated waste. The Cs-mica accommodates up to 30% wt% Cs{sub 2}O and all the GNEP waste species, Ba, Sr, Rb including the Cs-137 transmutation to Ba-137. For reference, the cesium mineral pollucite (CsAlSi{sub 2}O{sub 6}), currently being studied for GNEP applications, can only be fabricated at {ge} 1000 C. Pollucite mineralization creates secondary aqueous waste streams and NO{sub x}. Pollucite is not tolerant of high concentrations of Ba, Sr or Rb and forces the divalent species into different mineral host phases. The pollucite can accommodate up to 33% wt% Cs{sub 2}O.

  16. Experimental determination of the speciation, partitioning, and release of perrhenate as a chemical surrogate for pertechnetate from a sodalite-bearing multiphase ceramic waste form

    SciTech Connect (OSTI)

    Pierce, Eric M.; Lukens, Wayne W.; Fitts, Jeff. P.; Jantzen, Carol. M.; Tang, G.

    2013-12-01

    A key component to closing the nuclear fuel cycle is the storage and disposition of nuclear waste in geologic systems. Multiphase ceramic waste forms have been studied extensively as a potential host matrix for nuclear waste. Understanding the speciation, partitioning, and release behavior of radionuclides immobilized in multiphase ceramic waste forms is a critical aspect of developing the scientific and technical basis for nuclear waste management. In this study, we evaluated a sodalite-bearing multiphase ceramic waste form (i.e., fluidized-bed steam reform sodium aluminosilicate [FBSR NAS] product) as a potential host matrix for long-lived radionuclides, such as technetium (99Tc). The FBSR NAS material consists primarily of nepheline (ideally NaAlSiO4), anion-bearing sodalites (ideally M8[Al6Si6O24]X2, where M refers to alkali and alkaline earth cations and X refers to monovalent anions), and nosean (ideally Na8[AlSiO4]6SO4). Bulk X-ray absorption fine structure analysis of the multiphase ceramic waste form, suggest rhenium (Re) is in the Re(VII) oxidation state and has partitioned to a Re-bearing sodalite phase (most likely a perrhenate sodalite Na8[Al6Si6O24](ReO4)2). Rhenium was added as a chemical surrogate for 99Tc during the FBSR NAS synthesis process. The weathering behavior of the FBSR NAS material was evaluated under hydraulically unsaturated conditions with deionized water at 90 ?C. The steady-state Al, Na, and Si concentrations suggests the weathering mechanisms are consistent with what has been observed for other aluminosilicate minerals and include a combination of ion exchange, network hydrolysis, and the formation of an enriched-silica surface layer or phase. The steady-state S and Re concentrations are within an order of magnitude of the nosean and perrhenate sodalite solubility, respectively. The order of magnitude difference between the observed and predicted concentration for Re and S may be associated with the fact that the anion-bearing sodalites contained in the multiphase ceramic matrix are present as mixed-anion sodalite phases. These results suggest the multiphase FBSR NAS material may be a viable host matrix for long-lived, highly mobilie radionuclides which is a critical aspect in the management of nuclear waste.

  17. Tax Reform and Real Estate

    E-Print Network [OSTI]

    Maisel, Sherman J.; Quigley, John M.

    1985-01-01

    WORKING PAPER 85-100 TAX REFORM AND REAL ESTATE BY SHERMANof wider import. TAX REFORM AND REAL ESTATE by Sherman J.B. The Initial Impact of Tax Reform IV. RESULTS: RESTORING

  18. Catalytic reforming methods

    SciTech Connect (OSTI)

    Tadd, Andrew R; Schwank, Johannes

    2013-05-14

    A catalytic reforming method is disclosed herein. The method includes sequentially supplying a plurality of feedstocks of variable compositions to a reformer. The method further includes adding a respective predetermined co-reactant to each of the plurality of feedstocks to obtain a substantially constant output from the reformer for the plurality of feedstocks. The respective predetermined co-reactant is based on a C/H/O atomic composition for a respective one of the plurality of feedstocks and a predetermined C/H/O atomic composition for the substantially constant output.

  19. Non-catalytic recuperative reformer

    DOE Patents [OSTI]

    Khinkis, Mark J.; Kozlov, Aleksandr P.; Kurek, Harry

    2015-12-22

    A non-catalytic recuperative reformer has a flue gas flow path for conducting hot flue gas from a thermal process and a reforming mixture flow path for conducting a reforming mixture. At least a portion of the reforming mixture flow path is embedded in the flue gas flow path to permit heat transfer from the hot flue gas to the reforming mixture. The reforming mixture flow path contains substantially no material commonly used as a catalyst for reforming hydrocarbon fuel (e.g., nickel oxide, platinum group elements or rhenium), but instead the reforming mixture is reformed into a higher calorific fuel via reactions due to the heat transfer and residence time. In a preferred embodiment, extended surfaces of metal material such as stainless steel or metal alloy that are high in nickel content are included within at least a portion of the reforming mixture flow path.

  20. NETL - Fuel Reforming Facilities

    ScienceCinema (OSTI)

    None

    2014-06-27

    Research using NETL's Fuel Reforming Facilities explores catalytic issues inherent in fossil-energy related applications, including catalyst synthesis and characterization, reaction kinetics, catalyst activity and selectivity, catalyst deactivation, and stability.

  1. The Aftermath of Redistricting Reform in California

    E-Print Network [OSTI]

    Buchler, Justin

    2011-01-01

    2009. “Redistricting Reform Will Not Solve California’sMatthew. 2009. “Redistricting Reform Could Save California2. ———. 2011. “Redistricting Reform Revisited. ” California

  2. Bank Regulation and Mortgage Market Reform

    E-Print Network [OSTI]

    Jaffee, Dwight M.

    2011-01-01

    Regulation and Mortgage Market Reform Dwight M. Jaffee Boothfinancial sector regulatory reform initiatives are currentlyset concerns bank regulatory reform as embedded in the 2010

  3. Mapping the Consequences of Electoral Reform

    E-Print Network [OSTI]

    Latner, Michael S; Roach, Kyle

    2011-01-01

    Consequences of Electoral Reform Table A2. Unrotated Matrixthe Consequences of Electoral Reform California Journal ofConsequences of Electoral Reform Michael S. Latner and Kyle

  4. Politics and Policy in State Health Reform

    E-Print Network [OSTI]

    Zelman, Walter; Melamed, Alex

    2009-01-01

    Reform . . . . . . . . . . . . . . . . . . . . . . . . . . . .and Policy in State Health Reform by Walter Zelman, Ph.D.c Greenberge, S.S. , “Healthcare reform efforts win praise

  5. Patent Reform: Aligning Reward and Contribution

    E-Print Network [OSTI]

    Shapiro, Carl

    2007-01-01

    Patent Reform: Aligning Reward and Contribution † CarlThis paper analyzes two major reforms to the patent systemthey are issued. Three additional reforms relating to patent

  6. Constitutional Reform in California: The Surprising Divides

    E-Print Network [OSTI]

    Binder, Mike; Frisby, Tammy; Kousser, Thad B

    2010-01-01

    Issue 2 Constitutional Reform in California: The Surprisingviews on constitutional reform than whites and African-and opposition to proposed reforms, such as the elimination

  7. SUMMARY PLAN FOR BENCH-SCALE REFORMER AND PRODUCT TESTING TREATABILITY STUDIES USING HANFORD TANK WASTE

    SciTech Connect (OSTI)

    ROBBINS RA

    2011-02-11

    This paper describes the sample selection, sample preparation, environmental, and regulatory considerations for shipment of Hanford radioactive waste samples for treatability studies of the FBSR process at the Savannah River National Laboratory and the Pacific Northwest National Laboratory.

  8. Secondary Waste Form Screening Test Results—THOR® Fluidized Bed Steam Reforming Product in a Geopolymer Matrix

    SciTech Connect (OSTI)

    Pires, Richard P.; Westsik, Joseph H.; Serne, R. Jeffrey; Mattigod, Shas V.; Golovich, Elizabeth C.; Valenta, Michelle M.; Parker, Kent E.

    2011-07-14

    Screening tests are being conducted to evaluate waste forms for immobilizing secondary liquid wastes from the Hanford Tank Waste Treatment and Immobilization Plant (WTP). Plans are underway to add a stabilization treatment unit to the Effluent Treatment Facility to provide the needed capacity for treating these wastes from WTP. The current baseline is to use a Cast Stone cementitious waste form to solidify the wastes. Through a literature survey, DuraLith alkali-aluminosilicate geopolymer, fluidized-bed steam reformation (FBSR) granular product encapsulated in a geopolymer matrix, and a Ceramicrete phosphate-bonded ceramic were identified both as candidate waste forms and alternatives to the baseline. These waste forms have been shown to meet waste disposal acceptance criteria, including compressive strength and universal treatment standards for Resource Conservation and Recovery Act (RCRA) metals (as measured by the toxicity characteristic leaching procedure [TCLP]). Thus, these non-cementitious waste forms should also be acceptable for land disposal. Information is needed on all four waste forms with respect to their capability to minimize the release of technetium. Technetium is a radionuclide predicted to be in the secondary liquid wastes in small quantities, but the Integrated Disposal Facility (IDF) risk assessment analyses show that technetium, even at low mass, produces the largest contribution to the estimated IDF disposal impacts to groundwater.

  9. CGIAR Reform - Why So Difficult? Review, Reform, Renewal, Restructuring, Reform Again and then "The New CGIAR" - So Much Talk and So Little Basic Structural Change - Why?

    E-Print Network [OSTI]

    McCalla, Alex F

    2014-01-01

    Secretariat, FAO CGIAR Reform-Why So Difficult? 2013 TAC/of California, Davis CGIAR Reform — Why So Difficult?Review, Reform, Renewal, Restructuring, Reform Again and

  10. Reforming using erionite catalysts

    SciTech Connect (OSTI)

    Liers, J.; Meusinger, J.; Moesch, A. (Univ. of Leipzig (Germany)); Reschetilowski, W. (Karl Winnacker Inst. of DECHEMA, Frankfurt (Germany))

    1993-08-01

    The advantage of reforming on erionite catalysts is a product with high octane numbers and low amounts of aromatics. This advantage seems to be slight at reaction pressures lower than 25 bar. But it is possible to compensate for the influence of pressure by varying the erionite content within the catalyst and the reaction temperature. When reforming on Pt/Al[sub 2]O[sub 3] catalysts, the following reactions take place: dehydrocyclization of paraffins to naphthenes, dehydrogenation of naphthenes to aromatics, isomerication of normal paraffins remains in the product, lowering its octane number. By using a Ni/H-erionite catalyst, the octane rating can be increased by 3 to 7 numbers through selective hydrocracking of n-alkanes in the reformate. Erionite catalysts favor shape-selective hydrocracking of normal paraffins and the formation of cyclopentane derivatives lowering the content of aromatics during reforming reactions. Reducing the reaction pressure decreases hydrocracking activity and cyclopentane formation. These results can be interpreted in terms of thermodynamic restrictions and deactivation.

  11. Dry reforming of hydrocarbon feedstocks

    SciTech Connect (OSTI)

    Shah, Yatish T.; Gardner, Todd H.

    2014-09-25

    Developments in catalyst technology for the dry reforming of hydrocarbon feedstocks are reviewed for methane, higher hydrocarbons and alcohols. Thermodynamics, mechanisms and the kinetics of dry reforming are also reviewed. The literature on Ni catalysts, bi-metallic Ni catalysts and the role of promoters on Ni catalysts is critically evaluated. The use of noble and transitional metal catalysts for dry reforming is discussed. The application of solid oxide and metal carbide catalysts to dry reforming is also evaluated. Finally, various mechanisms for catalyst deactivation are assessed. This review also examines the various process related issues associated with dry reforming such as its application and heat optimization. Novel approaches such as supercritical dry reforming and microwave assisted dry reforming are briefly expanded upon.

  12. Methanol partial oxidation reformer

    DOE Patents [OSTI]

    Ahmed, Shabbir (Bolingbrook, IL); Kumar, Romesh (Naperville, IL); Krumpelt, Michael (Naperville, IL)

    1999-01-01

    A partial oxidation reformer comprising a longitudinally extending chamber having a methanol, water and an air inlet and an outlet. An igniter mechanism is near the inlets for igniting a mixture of methanol and air, while a partial oxidation catalyst in the chamber is spaced from the inlets and converts methanol and oxygen to carbon dioxide and hydrogen. Controlling the oxygen to methanol mole ratio provides continuous slightly exothermic partial oxidation reactions of methanol and air producing hydrogen gas. The liquid is preferably injected in droplets having diameters less than 100 micrometers. The reformer is useful in a propulsion system for a vehicle which supplies a hydrogen-containing gas to the negative electrode of a fuel cell.

  13. Methanol partial oxidation reformer

    DOE Patents [OSTI]

    Ahmed, Shabbir (Bolingbrook, IL); Kumar, Romesh (Naperville, IL); Krumpelt, Michael (Naperville, IL)

    2001-01-01

    A partial oxidation reformer comprising a longitudinally extending chamber having a methanol, water and an air inlet and an outlet. An igniter mechanism is near the inlets for igniting a mixture of methanol and air, while a partial oxidation catalyst in the chamber is spaced from the inlets and converts methanol and oxygen to carbon dioxide and hydrogen. Controlling the oxygen to methanol mole ratio provides continuous slightly exothermic partial oxidation reactions of methanol and air producing hydrogen gas. The liquid is preferably injected in droplets having diameters less than 100 micrometers. The reformer is useful in a propulsion system for a vehicle which supplies a hydrogen-containing gas to the negative electrode of a fuel cell.

  14. Methanol partial oxidation reformer

    DOE Patents [OSTI]

    Ahmed, S.; Kumar, R.; Krumpelt, M.

    1999-08-24

    A partial oxidation reformer is described comprising a longitudinally extending chamber having a methanol, water and an air inlet and an outlet. An igniter mechanism is near the inlets for igniting a mixture of methanol and air, while a partial oxidation catalyst in the chamber is spaced from the inlets and converts methanol and oxygen to carbon dioxide and hydrogen. Controlling the oxygen to methanol mole ratio provides continuous slightly exothermic partial oxidation reactions of methanol and air producing hydrogen gas. The liquid is preferably injected in droplets having diameters less than 100 micrometers. The reformer is useful in a propulsion system for a vehicle which supplies a hydrogen-containing gas to the negative electrode of a fuel cell. 7 figs.

  15. Methanol partial oxidation reformer

    DOE Patents [OSTI]

    Ahmed, S.; Kumar, R.; Krumpelt, M.

    1999-08-17

    A partial oxidation reformer is described comprising a longitudinally extending chamber having a methanol, water and an air inlet and an outlet. An igniter mechanism is near the inlets for igniting a mixture of methanol and air, while a partial oxidation catalyst in the chamber is spaced from the inlets and converts methanol and oxygen to carbon dioxide and hydrogen. Controlling the oxygen to methanol mole ratio provides continuous slightly exothermic partial oxidation reactions of methanol and air producing hydrogen gas. The liquid is preferably injected in droplets having diameters less than 100 micrometers. The reformer is useful in a propulsion system for a vehicle which supplies a hydrogen-containing gas to the negative electrode of a fuel cell. 7 figs.

  16. Distributed Bio-Oil Reforming

    Broader source: Energy.gov [DOE]

    Presentation by NREL's Robert Evans at the October 24, 2006 Bio-Derived Liquids to Hydrogen Distributed Reforming Working Group Kick-Off Meeting.

  17. Tax Reform and Real Estate

    E-Print Network [OSTI]

    Maisel, Sherman J.; Quigley, John M.

    1985-01-01

    Berkeley CENTER Eon REAL ESTATE ANDURBAN ECONOMICS WORKING85-100 TAX REFORM AND REAL ESTATE BY SHERMAN J. MAISEL JOHNADMINISTRATION CENTER FOR REAL ESTATE AND URBAN ECONOMICS

  18. AEDP & Healthcare Reform Dipti Patel, FSA, MAAA

    E-Print Network [OSTI]

    Hong, Don

    Cigna AEDP & Healthcare Reform Dipti Patel, FSA, MAAA March 19, 2012 #12; Introductions Introducing... Cigna An overview of the AEDP Healthcare Reform Questions and Answers Overview #12 Branding ­ "GO YOU" · Things are changing ­ Health Care Reform · Young, energetic, executive leadership

  19. Federal Information Technology Acquisition Reform Act (FITARA...

    Energy Savers [EERE]

    Information Technology Acquisition Reform Act (FITARA) Data Resources Federal Information Technology Acquisition Reform Act (FITARA) Data Resources FITARA Resources Available for...

  20. Distributed Bio-Oil Reforming

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mines Bio-Derived Liquids Distributed Reforming Working Group Meeting HFC&IT Program Baltimore, MD October 24, 2006 1 Gasification Partial oxidation CH 1.46 O .67 + 0.16 O 2 ...

  1. Tax Reform and Real Estate

    E-Print Network [OSTI]

    Rosen, Kenneth T.; Lepcio, Andrea

    1986-01-01

    investment opportunities in real estate. -13- Appentlix CashBerkeley CENTER FOR REAL ESTATE S AND URBAN ECONOMICSPAPER 86-117 TAX REFORM AND REAL ESTATE_ BY KENNETH T. ROSEN

  2. Applications of solar reforming technology

    SciTech Connect (OSTI)

    Spiewak, I.; Tyner, C.E.; Langnickel, U.

    1993-11-01

    Research in recent years has demonstrated the efficient use of solar thermal energy for driving endothermic chemical reforming reactions in which hydrocarbons are reacted to form synthesis gas (syngas). Closed-loop reforming/methanation systems can be used for storage and transport of process heat and for short-term storage for peaking power generation. Open-loop systems can be used for direct fuel production; for production of syngas feedstock for further processing to specialty chemicals and plastics and bulk ammonia, hydrogen, and liquid fuels; and directly for industrial processes such as iron ore reduction. In addition, reforming of organic chemical wastes and hazardous materials can be accomplished using the high-efficiency destruction capabilities of steam reforming. To help identify the most promising areas for future development of this technology, we discuss in this paper the economics and market potential of these applications.

  3. The Dynamics of Reform of India’s Federal System

    E-Print Network [OSTI]

    Singh, Nirvikar

    2007-01-01

    Conflict and Economic Reform in the Developing World, Newconstraints to economic reforms that provide aggregateExpenditures and Economic Reform in India,” Journal of

  4. Essays on India’s Economy: Perspectives on Policy Reform

    E-Print Network [OSTI]

    Singh, Nirvikar

    2014-01-01

    Perspectives on Policy Reform Nirvikar Singh Professor ofwith economic policy reform. The essays are organized intofinancial inclusion and tax reform. This is followed by a

  5. Changing Tracks? The Prospect for California Pension Reform

    E-Print Network [OSTI]

    Kogan, Vladimir; McCubbins, Mathew D

    2010-01-01

    for California Pension Reform Notes We focus on the combinedfor California Pension Reform Vladimir Kogan University ofCalifornia budget, pension reform, fiscal oversight

  6. Administering Democracy: Public Opinion on Election Reform in California

    E-Print Network [OSTI]

    Bergman, Elizabeth

    2012-01-01

    Consequences of Electoral Reform in the United States. ”Turnout and Institutional Reform in Oregon. ” Social SciencePublic Opinion on Election Reform in California Elizabeth

  7. The role of the district office in instructional practice reform

    E-Print Network [OSTI]

    Rizzi, Karen Schultz

    2008-01-01

    reality: Standards-based reform in urban districts. MenloW. A. (1989). Using reform: Conceptualizing districtHow districts support school reform. Seattle: University of

  8. Before the House Oversight and Government Reform Subcommittee...

    Broader source: Energy.gov (indexed) [DOE]

    on Technology, Information Policy, Intergovernmental Relations and Procurement Reform, Committee on Oversight and Government Reform, United States House of Representatives...

  9. Bringing electricity reform to the Philippines

    SciTech Connect (OSTI)

    Fe Villamejor-Mendoza, Maria

    2008-12-15

    Electricity reforms will not translate to competition overnight. But reforms are inching their way forward in institutions and stakeholders of the Philippine electricity industry, through regulatory and competition frameworks, processes, and systems promulgated and implemented. (author)

  10. Evaluate reformer performance at a glance

    SciTech Connect (OSTI)

    Nag, A. [Indian Oil Corporation Ltd., Gujarat (India)

    1996-02-01

    Catalytic reforming is becoming increasingly important in replacing octane lost as the removal of lead from worldwide gasoline pools continues. A method has been developed that can quickly evaluate the performance of any catalytic reformer. The catalytic naphtha reforming process primarily involves three well-known reactions. These are aromatization of naphthenes, cyclization of paraffins and hydrocracking of paraffins. Hydrogen is produced in the process of aromatization and dehydrocyclization of paraffins. Reformer performance is normally evaluated with a reformate analysis (PONA) and yield of C{sub 5{sup +}} reformate. This method of quick evaluation of reformer performance is based upon the main assumption that the increase in hydrocarbon moles in the process is equal to the number of C{single_bond}C bond ruptures and one mole of hydrogen is absorbed to saturate the same. This new method calculates aromatization efficiency, paraffin conversion, aromatic selectivity and finally the paraffin, naphthene and aromatic content of C{sub 5{sup +}} reformate.

  11. ALBERTA LAW REFORM INSTITUTE EDMONTON, ALBERTA

    E-Print Network [OSTI]

    MacMillan, Andrew

    ALBERTA LAW REFORM INSTITUTE EDMONTON, ALBERTA CONTRACTS FOR THE SALE AND PURCHASE OF LAND;#12;Table of Contents ALBERTA LAW REFORM INSTITUTE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 CHAPTER 2. COMPARISON OF THE PRESENT AND PREVIOUS LAW OF ALBERTA

  12. Informationsveranstaltung zur Reform des gymnasialen Lehramtes

    E-Print Network [OSTI]

    Informationsveranstaltung zur Reform des gymnasialen Lehramtes W¨urzburg, 3. Mai 2013 ... was lange montags 16-17 Uhr und freitags 10-11 Uhr Euch und allen an der Reform Beteiligten ein herzliches Danke

  13. Method of steam reforming methanol to hydrogen

    DOE Patents [OSTI]

    Beshty, Bahjat S. (Lower Makefield, PA)

    1990-01-01

    The production of hydrogen by the catalyzed steam reforming of methanol is accomplished using a reformer of greatly reduced size and cost wherein a mixture of water and methanol is superheated to the gaseous state at temperatures of about 800.degree. to about 1,100.degree. F. and then fed to a reformer in direct contact with the catalyst bed contained therein, whereby the heat for the endothermic steam reforming reaction is derived directly from the superheated steam/methanol mixture.

  14. Plasmatron Fuel Reformer Development and Internal Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicle Applications Plasmatron Fuel Reformer Development and Internal Combustion Engine Vehicle Applications 2004 Diesel Engine Emissions Reduction (DEER) Conference...

  15. Attrition resistant fluidizable reforming catalyst

    DOE Patents [OSTI]

    Parent, Yves O. (Golden, CO); Magrini, Kim (Golden, CO); Landin, Steven M. (Conifer, CO); Ritland, Marcus A. (Palm Beach Shores, FL)

    2011-03-29

    A method of preparing a steam reforming catalyst characterized by improved resistance to attrition loss when used for cracking, reforming, water gas shift and gasification reactions on feedstock in a fluidized bed reactor, comprising: fabricating the ceramic support particle, coating a ceramic support by adding an aqueous solution of a precursor salt of a metal selected from the group consisting of Ni, Pt, Pd, Ru, Rh, Cr, Co, Mn, Mg, K, La and Fe and mixtures thereof to the ceramic support and calcining the coated ceramic in air to convert the metal salts to metal oxides.

  16. PER-Based Reform at a Multicultural

    E-Print Network [OSTI]

    Steinberg, Richard N.

    PER-Based Reform at a Multicultural Institution Some Lessons from Physics Education Research that the most suc- cessful reform strategies require significant interactions among students, and between students and instructor. It is therefore reasonable to wonder about the extent to which PER-based reform

  17. Integrated reformer and shift reactor

    DOE Patents [OSTI]

    Bentley, Jeffrey M.; Clawson, Lawrence G.; Mitchell, William L.; Dorson, Matthew H.

    2006-06-27

    A hydrocarbon fuel reformer for producing diatomic hydrogen gas is disclosed. The reformer includes a first reaction vessel, a shift reactor vessel annularly disposed about the first reaction vessel, including a first shift reactor zone, and a first helical tube disposed within the first shift reactor zone having an inlet end communicating with a water supply source. The water supply source is preferably adapted to supply liquid-phase water to the first helical tube at flow conditions sufficient to ensure discharge of liquid-phase and steam-phase water from an outlet end of the first helical tube. The reformer may further include a first catalyst bed disposed in the first shift reactor zone, having a low-temperature shift catalyst in contact with the first helical tube. The catalyst bed includes a plurality of coil sections disposed in coaxial relation to other coil sections and to the central longitudinal axis of the reformer, each coil section extending between the first and second ends, and each coil section being in direct fluid communication with at least one other coil section.

  18. Plasma-catalyzed fuel reformer

    DOE Patents [OSTI]

    Hartvigsen, Joseph J.; Elangovan, S.; Czernichowski, Piotr; Hollist, Michele

    2013-06-11

    A reformer is disclosed that includes a plasma zone to receive a pre-heated mixture of reactants and ionize the reactants by applying an electrical potential thereto. A first thermally conductive surface surrounds the plasma zone and is configured to transfer heat from an external heat source into the plasma zone. The reformer further includes a reaction zone to chemically transform the ionized reactants into synthesis gas comprising hydrogen and carbon monoxide. A second thermally conductive surface surrounds the reaction zone and is configured to transfer heat from the external heat source into the reaction zone. The first thermally conductive surface and second thermally conductive surface are both directly exposed to the external heat source. A corresponding method and system are also disclosed and claimed herein.

  19. Hydrogen from Biomass by Autothermal Reforming

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation by Lanny D. Schmidt at the October 24, 2006 Bio-Derived Liquids to Hydrogen Distributed Reforming Working Group Kick-Off Meeting.

  20. Welfare reform and liberal governance: disciplining Cambodian-American bodies

    E-Print Network [OSTI]

    Truong, Michael H.

    2007-01-01

    Should Know About Welfare Reform (Series A, No. A- 52).2001). The Impact of Welfare Reform on Asians and PacificPunishment: How Welfare Reform Punishes the Poor. Oakland,

  1. State Finances in India: A Case for Systemic Reform

    E-Print Network [OSTI]

    Singh, Nirvikar

    2006-01-01

    M. Govinda (2000), “Tax Reform in India: Achievements andState Level Fiscal Reforms in India”, paper presented aton Indian Economic Reform, April 19-20. M. Govinda Rao and

  2. Inquiry-Based Learning: An Educational Reform Based

    E-Print Network [OSTI]

    McLoughlin, Padraig

    -Based Learning: An Educational Reform Based Upon Content-Centred Teaching. 1046-Centred Educational Reform 3 III Inquiry-Based Learning Pedagogy is Content 27 #12; ii Abstract Inquiry-Based Learning: An Educational Reform

  3. A second opinion on U.S. health care reform

    E-Print Network [OSTI]

    Chaufan, Claudia MD, PhD

    2010-01-01

    Cost Implications of Health Care Reform. N Engl J Med: p.opinion on U.S. health care reform Posted by PNHP on Friday,Obama argued that a model of reform as that implemented by

  4. Swimming Upstream: The Hard Politics of Health Reform in California

    E-Print Network [OSTI]

    Zelman, Walter

    2009-01-01

    The Hard Politics of Health Reform in California June 2009Report on State Health Access Reform,” Health Affairs, WebPolicy in State Health Reform,” Zelman, W. A. , and Melamed,

  5. Analysis of Senate Bill 92: Health Care Reform

    E-Print Network [OSTI]

    2009-01-01

    CJ. Effects of State Reforms on Health Insurance Coverage ofMorrisey MA. Small Group Reform and Insurance Provision byInterest Groups and Health Reform: Lessons from California.

  6. What is "Comprehensive Immigration Reform"? Taking the Long View

    E-Print Network [OSTI]

    Motomura, Hiroshi

    2010-01-01

    Stumpf. 1. Immigration Reform and Control Act of 1986, Pub.8 U.S.C. ). 35. Immigration Reform and Control Act of 1986,about “comprehensive immigration reform”—in the way the next

  7. Solid oxide fuel cell steam reforming power system

    DOE Patents [OSTI]

    Chick, Lawrence A.; Sprenkle, Vincent L.; Powell, Michael R.; Meinhardt, Kerry D.; Whyatt, Greg A.

    2013-03-12

    The present invention is a Solid Oxide Fuel Cell Reforming Power System that utilizes adiabatic reforming of reformate within this system. By utilizing adiabatic reforming of reformate within the system the system operates at a significantly higher efficiency than other Solid Oxide Reforming Power Systems that exist in the prior art. This is because energy is not lost while materials are cooled and reheated, instead the device operates at a higher temperature. This allows efficiencies higher than 65%.

  8. Making Sense of Reform in Mathematics Education : : The Impact on Practice by Interactions Between Teachers' Beliefs, Reform Policy and Collaboration

    E-Print Network [OSTI]

    Javier, Laura R.

    2014-01-01

    L. , & Cohen, D. K. (1996). Reform by the book: What is: Orlearning and instructional reform? Educational Researcher,school mathematics: The anti-reform of 1997-99. Phi Delta

  9. The Definitive Reform. How the 1996 Electoral Reform Triggered the Demise of the PRI's Dominant-Party Regime

    E-Print Network [OSTI]

    Garrido de Sierra, Sebastián

    2014-01-01

    the PRI Approve the Reform? . . . . . . . . . . . . . . .vi 4 How the 1996 Reform Triggered the End of the PRI’seffect of the 1996 electoral reform on the PRI’s unity . The

  10. Diesel Reformers for On-board Hydrogen Applications | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reformers for On-board Hydrogen Applications Diesel Reformers for On-board Hydrogen Applications 2003 DEER Conference Presentation: Hydrogen Source 2003deermauss.pdf More...

  11. Agenda for the Derived Liquids to Hydrogen Distributed Reforming...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reforming Targets Bio-Derived Liquids to Hydrogen Distributed Reforming Working Group (BILIWG) Kick-Off Meeting Proceedings Hilton Garden Inn-BWI,Baltimore, MD October 24, 2006...

  12. Hydrogen generation from plasmatron reformers and use for diesel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    generation from plasmatron reformers and use for diesel exhaust aftertreatment Hydrogen generation from plasmatron reformers and use for diesel exhaust aftertreatment 2003 DEER...

  13. Secretary Moniz to Present Project Management Reforms to the...

    Office of Environmental Management (EM)

    Moniz to Present Project Management Reforms to the National Academy of Public Administration Secretary Moniz to Present Project Management Reforms to the National Academy of Public...

  14. Improved System Performance and Reduced Cost of a Fuel Reformer...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reduced Cost of a Fuel Reformer, LNT, and SCR Aftertreatment System Meeting Emissions Useful Life Requirement Improved System Performance and Reduced Cost of a Fuel Reformer, LNT,...

  15. Fuel Reformer, LNT and SCR Aftertreatment System Meeting Emissions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reformer, LNT and SCR Aftertreatment System Meeting Emissions Useful Life Requirements Fuel Reformer, LNT and SCR Aftertreatment System Meeting Emissions Useful Life Requirements...

  16. Secretary Moniz's Remarks on Project Management Reform at the...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Project Management Reform at the National Academy of Public Administration -- As Delivered Secretary Moniz's Remarks on Project Management Reform at the National Academy of Public...

  17. Design, Modeling, and Validation of a Flame Reformer for LNT...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design, Modeling, and Validation of a Flame Reformer for LNT External Bypass Regeneration Design, Modeling, and Validation of a Flame Reformer for LNT External Bypass Regeneration...

  18. Before the House Oversight and Government Reform Subcommittee...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Oversight and Government Reform Subcommittee on Government Management, Organization, and Procurement Before the House Oversight and Government Reform Subcommittee on Government...

  19. Regulatory and Financial Reform of Federal Research Policy: Recommenda...

    Energy Savers [EERE]

    Regulatory and Financial Reform of Federal Research Policy: Recommendations to the NRC Committee on Research Universities Regulatory and Financial Reform of Federal Research...

  20. STEM education reform A public research university imperative!

    E-Print Network [OSTI]

    Sin, Peter

    STEM education reform A public research university imperative! University of Florida A significant education reform initiative for introductory courses. Will these -- and a growing number of other national

  1. BILIWG Meeting: High Pressure Steam Reforming of Bio-Derived...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High Pressure Steam Reforming of Bio-Derived Liquids (Presentation) BILIWG Meeting: High Pressure Steam Reforming of Bio-Derived Liquids (Presentation) Presented at the 2007...

  2. Bio-Derived Liquids to Hydrogen Distributed Reforming Targets...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Targets (Presentation) Bio-Derived Liquids to Hydrogen Distributed Reforming Targets (Presentation) Presented at the 2007 Bio-Derived Liquids to Hydrogen Distributed Reforming...

  3. Enabling Informed Adaptation of Reformed Instructional Materials

    E-Print Network [OSTI]

    Elby, Andy

    Enabling Informed Adaptation of Reformed Instructional Materials Rachel E. Scherr and Andrew Elby 20742 USA Abstract. Instructors inevitably need to adapt even the best reform materials to suit instructors, and video clips of students working on the materials. Our materials thus facilitate their own

  4. Olefins from High Yield Autothermal Reforming Process

    Energy Innovation Portal (Marketing Summaries) [EERE]

    2012-03-06

    The autothermal reforming method employs an improved dehydrogenation process for olefin production, utilizing platinum based dehydrogenation catalysts in the presence of oxygen. The autothermal process requires no external energy input following ignition and produces high conversions and yields from the gaseous hydrocarbon feeds. Autothermal reforming is an effective solution that meets the high demands of the chemical market industry by producing high yields...

  5. In Njeri Wamukonya, ed., Electricity Reform

    E-Print Network [OSTI]

    Delaware, University of

    electricity consumption in industrial countries has caused major air pollution problems. In fact, power plantsIn Njeri Wamukonya, ed., Electricity Reform: Social and Environmental Challenges Roskilde, Denmark: UNEP-RISÃ? Centre. Rethinking reform in the electricity sector: Power liberalisation or energy

  6. Methanol Steam Reformer on a Silicon Wafer

    SciTech Connect (OSTI)

    Park, H; Malen, J; Piggott, T; Morse, J; Sopchak, D; Greif, R; Grigoropoulos, C; Havstad, M; Upadhye, R

    2004-04-15

    A study of the reforming rates, heat transfer and flow through a methanol reforming catalytic microreactor fabricated on a silicon wafer are presented. Comparison of computed and measured conversion efficiencies are shown to be favorable. Concepts for insulating the reactor while maintaining small overall size and starting operation from ambient temperature are analyzed.

  7. Fuel cell integrated with steam reformer

    DOE Patents [OSTI]

    Beshty, Bahjat S. (Lower Makefield, PA); Whelan, James A. (Bricktown, NJ)

    1987-01-01

    A H.sub.2 -air fuel cell integrated with a steam reformer is disclosed wherein a superheated water/methanol mixture is fed to a catalytic reformer to provide a continuous supply of hydrogen to the fuel cell, the gases exhausted from the anode of the fuel cell providing the thermal energy, via combustion, for superheating the water/methanol mixture.

  8. "Reform" or "Opening"? Reform of China's State-Owned Enterprises and WTO Accession - The Dilemma of Applying GATT to Marketing Economies

    E-Print Network [OSTI]

    Blumental, David

    1998-01-01

    China's Assurances on Reform Please U.S. , AsIAN WALL ST.REFORM" OR "OPENING"?REFORM OF CHINA'S STATE-OWNED ENTERPRISES AND WTO

  9. Integrated hydrocarbon reforming system and controls

    DOE Patents [OSTI]

    Clawson, Lawrence G.; Dorson, Matthew H.; Mitchell, William L.; Nowicki, Brian J.; Thijssen, Johannes; Davis, Robert; Papile, Christopher; Rumsey, Jennifer W.; Longo, Nathan; Cross, III, James C.; Rizzo, Vincent; Kleeburg, Gunther; Rindone, Michael; Block, Stephen G.; Sun, Maria; Morriseau, Brian D.; Hagan, Mark R.; Bowers, Brian

    2003-11-04

    A hydrocarbon reformer system including a first reactor configured to generate hydrogen-rich reformate by carrying out at least one of a non-catalytic thermal partial oxidation, a catalytic partial oxidation, a steam reforming, and any combinations thereof, a second reactor in fluid communication with the first reactor to receive the hydrogen-rich reformate, and having a catalyst for promoting a water gas shift reaction in the hydrogen-rich reformate, and a heat exchanger having a first mass of two-phase water therein and configured to exchange heat between the two-phase water and the hydrogen-rich reformate in the second reactor, the heat exchanger being in fluid communication with the first reactor so as to supply steam to the first reactor as a reactant is disclosed. The disclosed reformer includes an auxiliary reactor configured to generate heated water/steam and being in fluid communication with the heat exchanger of the second reactor to supply the heated water/steam to the heat exchanger.

  10. September 25, 2013 AFSCME Continues to Object to Pension Reform;

    E-Print Network [OSTI]

    Leistikow, Bruce N.

    September 25, 2013 AFSCME Continues to Object to Pension Reform; UC Implements Latest Bargaining working conditions and reasonable pension reform. However, AFSCME has rejected UC's proposals. From the start, AFSCME leadership has objected to UC's responsible pension reform -- the kind of reform that

  11. Internal reforming fuel cell assembly with simplified fuel feed

    DOE Patents [OSTI]

    Farooque, Mohammad (Huntington, CT); Novacco, Lawrence J. (Brookfield, CT); Allen, Jeffrey P. (Naugatuck, CT)

    2001-01-01

    A fuel cell assembly in which fuel cells adapted to internally reform fuel and fuel reformers for reforming fuel are arranged in a fuel cell stack. The fuel inlet ports of the fuel cells and the fuel inlet ports and reformed fuel outlet ports of the fuel reformers are arranged on one face of the fuel cell stack. A manifold sealing encloses this face of the stack and a reformer fuel delivery system is arranged entirely within the region between the manifold and the one face of the stack. The fuel reformer has a foil wrapping and a cover member forming with the foil wrapping an enclosed structure.

  12. Nicholas Barr: USS reform directions Ver. 2 1 26 March 2015 What reform directions for USS?1

    E-Print Network [OSTI]

    Wirosoetisno, Djoko

    Nicholas Barr: USS reform directions Ver. 2 1 26 March 2015 What reform directions for USS?1 Nicholas Barr2 Summary This note discusses reform of USS as simply as possible (see glossary at end why and how a wider view of de-risking is both feasible and desirable. Some of the reforms of USS

  13. Device for cooling and humidifying reformate

    DOE Patents [OSTI]

    Zhao, Jian Lian (Belmont, MA); Northrop, William F. (Ann Arbor, MI)

    2008-04-08

    Devices for cooling and humidifying a reformate stream from a reforming reactor as well as related methods, modules and systems includes a heat exchanger and a sprayer. The heat exchanger has an inlet, an outlet, and a conduit between the inlet and the outlet. The heat exchanger is adapted to allow a flow of a first fluid (e.g. water) inside the conduit and to establish a heat exchange relationship between the first fluid and a second fluid (e.g. reformate from a reforming reactor) flowing outside the conduit. The sprayer is coupled to the outlet of the heat exchanger for spraying the first fluid exiting the heat exchanger into the second fluid.

  14. Bank Regulation and Mortgage Market Reform

    E-Print Network [OSTI]

    Jaffee, Dwight M.

    2011-01-01

    July 2008. U.S. Treasury/HUD (2011), “Reforming America’sthe recent U.S. Treasury/HUD (2011) White Paper. The Whitepresented in the Treasury/HUD (2011) White paper. I then

  15. Electricity reform abroad and US investment

    SciTech Connect (OSTI)

    1997-10-01

    This report reviews and analyzes the recent electricity reforms in Argentina, Australia, and the United Kingdom (UK) to illustrate how different models of privatization and reform have worked in practice. This report also analyzes the motivations of the U.S. companies who have invested in the electricity industries in these countries, which have become the largest targets of U.S. foreign investment in electricity. Two calculations of foreign investment are used. One is the foreign direct investment series produced by the U.S. Department of Commerce. The other is based on transactions in electric utilities of the three countries. The electricity reform and privatization experiences reviewed may offer some insight as to how the U.S. electricity industry might develop as a result of recent domestic reform efforts and deregulation at the state and national levels. 126 refs., 23 figs., 27 tabs.

  16. Copyright Law Reform: Some Achievable Goals 

    E-Print Network [OSTI]

    MacQueen, Hector L

    2007-01-01

    Copyright law reform in the European Union. The chapter discusses possible actions in light of new and amended EU Directives and whether these balances rights' holders and users' interests....

  17. The Ambiguous Transition: Building State Capacity and Expanding Popular Participation in Venezuela's Agrarian Reform

    E-Print Network [OSTI]

    Page, Tiffany Linton

    2011-01-01

    the Democracy? Crisis and Reform in Venezuela. ” Journal ofLaura. 1997. Agrarian Reform and Class Consciousness inCristóbal. 1978. “Agrarian Reform and the Class Struggle in

  18. The politics of criminal law reform : a comparative analysis of lower court decision-making

    E-Print Network [OSTI]

    Tiede, Lydia Brashear

    2008-01-01

    the Goals of Sentencing Reform. Washington, DC: USSC.1991. “The Sentencing Reform Act of 1984: A Bold Approach to2008. “The Constitutional Reform Act 2005. ” Available at

  19. What Charter Reform Commissions Can Teach Us About a Proposed Constitutional Convention in California

    E-Print Network [OSTI]

    Sonenshein, Raphael

    2010-01-01

    eds. 1995. Constitutional Reform in California. Berkeley:The Reemergence of Municipal Reform. New York: Academy ofin the Los Angeles Charter Reform of 1996-1999. ” In David

  20. Excellence through General Education: The Status of General Education Reform in Chinese Universities

    E-Print Network [OSTI]

    Liao, Xuehong

    2012-01-01

    of General Education Reform in Two Chinese Universities”.of general education reform. Change, 29(4), 18- AssociationGlobalization and educational reforms in Anglo-American

  1. The Political Economy of India’s Fiscal Federal System and its Reform

    E-Print Network [OSTI]

    Rao, M. Govinda; Singh, Nirvikar

    2006-01-01

    Political Economy and Issues for Reform, eds. , SatuIncentives, and Economic Reforms in India, New Delhi: Sageon Indian Economic Reform, June. Musgrave, Richard A. (

  2. The Resurgence of Land Reform Policy and Agrarian Movements in Indonesia

    E-Print Network [OSTI]

    Rachman, Noer Fauzi

    2011-01-01

    2006. Tafsir(an) Land Reform dalam Alur Sejarah Indonesia:Bibingka Strategy in Land Reform Implementation: Autonomous2006a. “Redistributive Land Reform in ‘Public (Forest) Land?

  3. You Must Learn! Hip-Hop Steps Into the Educational Reform Discourse

    E-Print Network [OSTI]

    Allahjah, Yusuf

    2012-01-01

    in School: Afrocentric reform, urban youth & the promise of2005). Standards-Based Reform and Low Performing Schools: AIn F. Hess, Urban School Reform: Lessons From San Diego,

  4. School Reform for Students of Color and English Learners: Leaving Pedagogy Behind

    E-Print Network [OSTI]

    Trujillo, Tina

    2011-01-01

    School Reform for Students of Color and English Learners:non-profit school reform organizations, universities, for-non- profit school reform organizations have proliferated in

  5. The Politics of Revenue-Raising Tax Reform in Latin America

    E-Print Network [OSTI]

    Fairfield, Tasha

    2010-01-01

    George, ed. 1998. “Fiscal Reforms in Low-Income Countries:Markets, and Structural Reform in Latin America. Miami:Imperatives and Tax Reform: Lessons from Postcommunist

  6. Is California Different? State-Specific Risk Adjustment Needs under Health Reform

    E-Print Network [OSTI]

    Fulton, Brent D.; Dow, William H.

    2011-01-01

    Adjustment Needs under Health Reform Brent D. Fulton andinsurance market under reform is the use of risk adjustmentplans. Keywords: health care reform, The Affordable Health

  7. Mayors, Markets and Municipal Reform: The Politics of Water Delivery in Mexico

    E-Print Network [OSTI]

    Herrera, Veronica Maria Sol

    2011-01-01

    Economy of Water Pricing Reforms. Washington, DC: WorldEconomy of Policy Reform. Washington, DC: Institute for2001. “Constructing Reform Coalitions: The Politics of

  8. Reform or Radicalism: Left Social Movements from the Battle of Seattle to Occupy Wall Street

    E-Print Network [OSTI]

    Rowe, James K; Carroll, Myles

    2014-01-01

    abstract antipathy towards ‘tepid reform’ and ‘unrealisticReform or Radicalism: Left Social Movements from the Battledynamism between radical and reform wings drove gains. This

  9. Prospects for Comprehensive Immigration Reform in 2012-2013: Accounting for Trends in Immigration Public Opinion

    E-Print Network [OSTI]

    Abrejano, Marisa

    2013-01-01

    Comprehensive Immigration Reform in 2012-2013: Accountingpromised to make immigration reform a priority in his firstComprehensive Immigration Reform in 2012-2013 Accounting for

  10. Reforming of fuel inside fuel cell generator

    DOE Patents [OSTI]

    Grimble, Ralph E. (Finleyville, PA)

    1988-01-01

    Disclosed is an improved method of reforming a gaseous reformable fuel within a solid oxide fuel cell generator, wherein the solid oxide fuel cell generator has a plurality of individual fuel cells in a refractory container, the fuel cells generating a partially spent fuel stream and a partially spent oxidant stream. The partially spent fuel stream is divided into two streams, spent fuel stream I and spent fuel stream II. Spent fuel stream I is burned with the partially spent oxidant stream inside the refractory container to produce an exhaust stream. The exhaust stream is divided into two streams, exhaust stream I and exhaust stream II, and exhaust stream I is vented. Exhaust stream II is mixed with spent fuel stream II to form a recycle stream. The recycle stream is mixed with the gaseous reformable fuel within the refractory container to form a fuel stream which is supplied to the fuel cells. Also disclosed is an improved apparatus which permits the reforming of a reformable gaseous fuel within such a solid oxide fuel cell generator. The apparatus comprises a mixing chamber within the refractory container, means for diverting a portion of the partially spent fuel stream to the mixing chamber, means for diverting a portion of exhaust gas to the mixing chamber where it is mixed with the portion of the partially spent fuel stream to form a recycle stream, means for injecting the reformable gaseous fuel into the recycle stream, and means for circulating the recycle stream back to the fuel cells.

  11. Hydrogen generation utilizing integrated CO2 removal with steam reforming

    DOE Patents [OSTI]

    Duraiswamy, Kandaswamy; Chellappa, Anand S

    2013-07-23

    A steam reformer may comprise fluid inlet and outlet connections and have a substantially cylindrical geometry divided into reforming segments and reforming compartments extending longitudinally within the reformer, each being in fluid communication. With the fluid inlets and outlets. Further, methods for generating hydrogen may comprise steam reformation and material adsorption in one operation followed by regeneration of adsorbers in another operation. Cathode off-gas from a fuel cell may be used to regenerate and sweep the adsorbers, and the operations may cycle among a plurality of adsorption enhanced reformers to provide a continuous flow of hydrogen.

  12. Electricity reform in Chile : lessons for developing countries

    E-Print Network [OSTI]

    Pollitt, Michael G.

    2004-01-01

    Chile was the first country in the world to implement a comprehensive reform of its electricity sector in the recent period. Among developing countries only Argentina has had a comparably comprehensive and successful reform. ...

  13. Promoting Public Policy Reform from Inside and Outside Government

    E-Print Network [OSTI]

    Promoting Public Policy Reform from Inside and Outside Government Sponsored by SF-makers who have had the unique opportunity to fight for social policy reforms from both the inside

  14. The Role of Informatics in Health Care Reform

    E-Print Network [OSTI]

    Rubin, Daniel L.

    The Role of Informatics in Health Care Reform Yueyi I. Liu, MD, PhD, Daniel L. Rubin, MD, MS reform. Informatics is crucial in tackling this challenge. The American Recovery and Reinvestment Act

  15. How Did Health Care Reform in Massachusetts Impact Insurance Premiums?

    E-Print Network [OSTI]

    Graves, John A.

    It is widely recognized that the 2006 Massachusetts health reforms served as a blueprint for national reform under the 2010 Affordable Care Act (ACA). As such, there is interest in using the Massachusetts experience to ...

  16. Voting Systems and Election Reform: What Do Election Officials Think? 

    E-Print Network [OSTI]

    2007-01-01

    This dissertation contains two essays on the effect of welfare reform on child- birth, marriage, and divorce. In the first essay, I exploit the cross state variation in welfare reform implementation to identify its effect on birth rates. The results...

  17. INDIVIDUAL REFORM ELEMENTS .63Average course exam score

    E-Print Network [OSTI]

    Colorado at Boulder, University of

    INDIVIDUAL REFORM ELEMENTS .63Average course exam score .11In class clicker score .02Lecture: · Correlations with effort/curricular elements are positive but not high, indicating no individual course reform

  18. Online appendix for Teacher Pay Reform and Productivity

    E-Print Network [OSTI]

    Sprott, Julien Clinton

    Online appendix for Teacher Pay Reform and Productivity by Sojourner, Mykerezi & West September 26 Figure 1: Effects of P4P-centered HRM reform on reading and math achievement as measured by the MCA

  19. Auxiliary reactor for a hydrocarbon reforming system

    DOE Patents [OSTI]

    Clawson, Lawrence G.; Dorson, Matthew H.; Mitchell, William L.; Nowicki, Brian J.; Bentley, Jeffrey M.; Davis, Robert; Rumsey, Jennifer W.

    2006-01-17

    An auxiliary reactor for use with a reformer reactor having at least one reaction zone, and including a burner for burning fuel and creating a heated auxiliary reactor gas stream, and heat exchanger for transferring heat from auxiliary reactor gas stream and heat transfer medium, preferably two-phase water, to reformer reaction zone. Auxiliary reactor may include first cylindrical wall defining a chamber for burning fuel and creating a heated auxiliary reactor gas stream, the chamber having an inlet end, an outlet end, a second cylindrical wall surrounding first wall and a second annular chamber there between. The reactor being configured so heated auxiliary reactor gas flows out the outlet end and into and through second annular chamber and conduit which is disposed in second annular chamber, the conduit adapted to carry heat transfer medium and being connectable to reformer reaction zone for additional heat exchange.

  20. Thermally integrated staged methanol reformer and method

    DOE Patents [OSTI]

    Skala, Glenn William (Churchville, NY); Hart-Predmore, David James (Rochester, NY); Pettit, William Henry (Rochester, NY); Borup, Rodney Lynn (East Rochester, NY)

    2001-01-01

    A thermally integrated two-stage methanol reformer including a heat exchanger and first and second reactors colocated in a common housing in which a gaseous heat transfer medium circulates to carry heat from the heat exchanger into the reactors. The heat transfer medium comprises principally hydrogen, carbon dioxide, methanol vapor and water vapor formed in a first stage reforming reaction. A small portion of the circulating heat transfer medium is drawn off and reacted in a second stage reforming reaction which substantially completes the reaction of the methanol and water remaining in the drawn-off portion. Preferably, a PrOx reactor will be included in the housing upstream of the heat exchanger to supplement the heat provided by the heat exchanger.

  1. Pyrochlore catalysts for hydrocarbon fuel reforming

    DOE Patents [OSTI]

    Berry, David A.; Shekhawat, Dushyant; Haynes, Daniel; Smith, Mark; Spivey, James J.

    2012-08-14

    A method of catalytically reforming a reactant gas mixture using a pyrochlore catalyst material comprised of one or more pyrochlores having the composition A2B2-y-zB'yB"zO7-.DELTA., where y>0 and z.gtoreq.0. Distribution of catalytically active metals throughout the structure at the B site creates an active and well dispersed metal locked into place in the crystal structure. This greatly reduces the metal sintering that typically occurs on supported catalysts used in reforming reactions, and reduces deactivation by sulfur and carbon. Further, oxygen mobility may also be enhanced by elemental exchange of promoters at sites in the pyrochlore. The pyrochlore catalyst material may be utilized in catalytic reforming reactions for the conversion of hydrocarbon fuels into synthesis gas (H2+CO) for fuel cells, among other uses.

  2. Supported metal catalysts for alcohol/sugar alcohol steam reforming

    SciTech Connect (OSTI)

    Davidson, Stephen; Zhang, He; Sun, Junming; Wang, Yong

    2014-08-21

    Despite extensive studies on hydrogen production via steam reforming of alcohols and sugar alcohols, catalysts typically suffer a variety of issues from poor hydrogen selectivity to rapid deactivation. Here, we summarize recent advances in fundamental understanding of functionality and structure of catalysts for alcohol/sugar alcohol steam reforming, and provide perspectives on further development required to design highly efficient steam reforming catalysts.

  3. Data reconciliation and optimal operation of a catalytic naphtha reformer

    E-Print Network [OSTI]

    Skogestad, Sigurd

    Data reconciliation and optimal operation of a catalytic naphtha reformer Tore Lid Statoil Mongstad model of a semiregenerative catalytic naphtha reformer, involving five pseudo components, was presented) developed a more de- tailed model of a semiregenerative catalytic naphtha reformer, involving 35 pseudo

  4. Data reconciliation and optimal operation of a catalytic naphtha reformer

    E-Print Network [OSTI]

    Skogestad, Sigurd

    Data reconciliation and optimal operation of a catalytic naphtha reformer Tore Lid Statoil Mongstad of a semiregenerative catalytic naphtha reformer, involving 35 pseudo compo- nents. They claimed that the simplified-mail:skoge@chemeng.ntnu.no) #12;Abstract The naphtha reforming process converts low-octane gasoline blending compo- nents to high

  5. Longevity, Life-cycle Behavior and Pension Reform , Victoria Prowse

    E-Print Network [OSTI]

    Alexandrova, Ivana

    Longevity, Life-cycle Behavior and Pension Reform Peter Haan , Victoria Prowse July 4, 2011 Abstract How can public pension systems be reformed to ensure fiscal stability in the face of increasing and retirement behavior. Keywords: Life Expectancy; Public Pension Reform; Retirement; Employment; Life

  6. Wellcome Trust CONSULTATION RESPONSE Ofqual: A level Reform Consultation

    E-Print Network [OSTI]

    Rambaut, Andrew

    Wellcome Trust CONSULTATION RESPONSE Ofqual: A level Reform Consultation September 2012 1 Ofqual: A Level Reform Consultation Response by the Wellcome Trust September 2012 Key Points National Subject to university. We are therefore pleased to respond to this consultation on reforming A levels. Our comments

  7. The Myth of "Broken Britain": Welfare Reform and the Production

    E-Print Network [OSTI]

    The Myth of "Broken Britain": Welfare Reform and the Production of Ignorance Tom Slater School, dependency) is repeatedly invoked by the architects of welfare reform to manufacture ignorance of alternative. Keywords: agnotology, welfare reform, Broken Society, Big Society, Iain Duncan-Smith, think tanks

  8. Reformation and Revolution in Early Modern England History 418

    E-Print Network [OSTI]

    Fletcher, Robin

    1 Reformation and Revolution in Early Modern England History 418 Consider Resources Primary (Online) Oxford Encyclopedia of the Reformation (Online) Oxford Dictionary of National Biography (Online and reformation B. Look up Historical Figures, Organizations, and Agencies... If you know of a person involved

  9. the triple aim MEETING THE GOAL OF HEALTH REFORM

    E-Print Network [OSTI]

    Chapman, Michael S.

    the triple aim MEETING THE GOAL OF HEALTH REFORM Produced by OHSU Strategic Communications -- emphasizing shared decision-making and coordination between providers -- could influence reform in a big way care. health reform is about getting better health outcomes for our communities, improving access

  10. Patent Reform: Aligning Reward and Contribution

    E-Print Network [OSTI]

    Sadoulet, Elisabeth

    4 Patent Reform: Aligning Reward and Contribution Carl Shapiro, University of California the current U.S. patent system allows patent holders to capture private rewards that exceed their social with the patent system and discourage in- novation by others. Economic efficiency is promoted if rewards to patent

  11. Hydrocarbon reforming catalyst material and configuration of the same

    DOE Patents [OSTI]

    Singh, Prabhakar (Export, PA); Shockling, Larry A. (Plum Borough, PA); George, Raymond A. (Pittsburgh, PA); Basel, Richard A. (Plub Borough, PA)

    1996-01-01

    A hydrocarbon reforming catalyst material comprising a catalyst support impregnated with catalyst is provided for reforming hydrocarbon fuel gases in an electrochemical generator. Elongated electrochemical cells convert the fuel to electrical power in the presence of an oxidant, after which the spent fuel is recirculated and combined with a fresh hydrocarbon feed fuel forming the reformable gas mixture which is fed to a reforming chamber containing a reforming catalyst material, where the reforming catalyst material includes discrete passageways integrally formed along the length of the catalyst support in the direction of reformable gas flow. The spent fuel and/or combusted exhaust gases discharged from the generator chamber transfer heat to the catalyst support, which in turn transfers heat to the reformable gas and to the catalyst, preferably via a number of discrete passageways disposed adjacent one another in the reforming catalyst support. The passageways can be slots extending inwardly from an outer surface of the support body, which slots are partly defined by an exterior confining wall. According to a preferred embodiment, the catalyst support is non-rigid, porous, fibrous alumina, wherein the fibers are substantially unsintered and compressible, and the reforming catalyst support is impregnated, at least in the discrete passageways with Ni and MgO, and has a number of internal slot passageways for reformable gas, the slot passageways being partly closed by a containing outer wall.

  12. Hydrocarbon reforming catalyst material and configuration of the same

    DOE Patents [OSTI]

    Singh, P.; Shockling, L.A.; George, R.A.; Basel, R.A.

    1996-06-18

    A hydrocarbon reforming catalyst material comprising a catalyst support impregnated with catalyst is provided for reforming hydrocarbon fuel gases in an electrochemical generator. Elongated electrochemical cells convert the fuel to electrical power in the presence of an oxidant, after which the spent fuel is recirculated and combined with a fresh hydrocarbon feed fuel forming the reformable gas mixture which is fed to a reforming chamber containing a reforming catalyst material, where the reforming catalyst material includes discrete passageways integrally formed along the length of the catalyst support in the direction of reformable gas flow. The spent fuel and/or combusted exhaust gases discharged from the generator chamber transfer heat to the catalyst support, which in turn transfers heat to the reformable gas and to the catalyst, preferably via a number of discrete passageways disposed adjacent one another in the reforming catalyst support. The passageways can be slots extending inwardly from an outer surface of the support body, which slots are partly defined by an exterior confining wall. According to a preferred embodiment, the catalyst support is non-rigid, porous, fibrous alumina, wherein the fibers are substantially unsintered and compressible, and the reforming catalyst support is impregnated, at least in the discrete passageways with Ni and MgO, and has a number of internal slot passageways for reformable gas, the slot passageways being partly closed by a containing outer wall. 5 figs.

  13. Medicaid Expansion and the Patient Protection and Affordable Care Act: Lessons and Hopes for Implementation of Healthcare Reform

    E-Print Network [OSTI]

    Kieber-Emmons, Autumn; Bodenheimer, Thomas; Grumbach, Kevin

    2011-01-01

    Coverage under Health Care Reform. UCLA Center for HealthHow Will Health Care Reform Affect Costs and Coverage? – Ex-Implementing Healthcare Reform in California. ” NEJM Epub. (

  14. Autothermal reforming catalyst having perovskite structure

    DOE Patents [OSTI]

    Krumpel, Michael (Naperville, IL); Liu, Di-Jia (Naperville, IL)

    2009-03-24

    The invention addressed two critical issues in fuel processing for fuel cell application, i.e. catalyst cost and operating stability. The existing state-of-the-art fuel reforming catalyst uses Rh and platinum supported over refractory oxide which add significant cost to the fuel cell system. Supported metals agglomerate under elevated temperature during reforming and decrease the catalyst activity. The catalyst is a perovskite oxide or a Ruddlesden-Popper type oxide containing rare-earth elements, catalytically active firs row transition metal elements, and stabilizing elements, such that the catalyst is a single phase in high temperature oxidizing conditions and maintains a primarily perovskite or Ruddlesden-Popper structure under high temperature reducing conditions. The catalyst can also contain alkaline earth dopants, which enhance the catalytic activity of the catalyst, but do not compromise the stability of the perovskite structure.

  15. Autothermal hydrodesulfurizing reforming method and catalyst

    DOE Patents [OSTI]

    Krumpelt, Michael; Kopasz, John P.; Ahmed, Shabbir; Kao, Richard Li-chih; Randhava, Sarabjit Singh

    2005-11-22

    A method for reforming a sulfur-containing carbonaceous fuel in which the sulfur-containing carbonaceous fuel is mixed with H.sub.2 O and an oxidant, forming a fuel/H.sub.2 O/oxidant mixture. The fuel H.sub.2 O/oxidant mixture is brought into contact with a catalyst composition comprising a dehydrogenation portion, an oxidation portion and a hydrodesulfurization portion, resulting in formation of a hydrogen-containing gas stream.

  16. Will electricity market reform likely reduce retail rates?

    SciTech Connect (OSTI)

    Woo, C.K.; Zarnikau, Jay

    2009-03-15

    To win public support, proponents for electricity market reform to introduce competition often promise that the post-reform retail rates will be lower than the average embedded cost rates that would have prevailed under the status quo of a regulated monopoly. A simple economic analysis shows that such a promise is unlikely to occur without the critical assumption that the post-reform market has marginal costs below average costs. (author)

  17. Pyrochem Catalysts for Diesel Fuel Reforming - Energy Innovation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vehicles and Fuels Vehicles and Fuels Hydrogen and Fuel Cell Hydrogen and Fuel Cell Return to Search Pyrochem Catalysts for Diesel Fuel Reforming National Energy Technology...

  18. Bio-Derived Liquids to Hydrogen Distributed Reforming Working...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Short Contact Time Hydrogen Generator, Wei Wei, GE Global Research Distributed Bio-Oil Reforming, Darlene Steward, National Renewable Energy Laboratory High-Pressure Steam...

  19. Bio-Derived Liquids to Hydrogen Distributed Reforming Working...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to Hydrogen Distributed Reforming Working Group (BILIWG) on October 24, 2006, in Baltimore, Maryland. The Working Group is addressing technical challenges to distributed...

  20. Bio-Derived Liquids to Hydrogen Distributed Reforming Targets

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation by Arlene Anderson at the October 24, 2006 Bio-Derived Liquids to Hydrogen Distributed Reforming Working Group Kick-Off Meeting.

  1. Before the House Oversight and Government Reform Subcommittee...

    Broader source: Energy.gov (indexed) [DOE]

    Oversight and Government Reform ubcommittee on Government Management, Organization, and Procurement By: Kathleen Hogan, Deputy Assistant Secretary Office of Energy Efficiency and...

  2. Distributed Reforming of Renewable Liquids via Water Splitting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    using Oxygen Transport Membrane (OTM) (Presentation) Presented at the 2007 Bio-Derived Liquids to Hydrogen Distributed Reforming Working Group held November 6, 2007 in...

  3. Bio-Derived Liquids to Hydrogen Distributed Reforming Working...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Purification Working Group (PURIWG) & Hydrogen Production Technical Team Bio-Derived Liquids to Hydrogen Distributed Reforming Working Group (BILIWG), Hydrogen Separation...

  4. Prospects for Comprehensive Immigration Reform in 2012-2013: Accounting for Trends in Immigration Public Opinion

    E-Print Network [OSTI]

    Abrejano, Marisa

    2013-01-01

    Reform in 2012-2013: Accounting for Trends in ImmigrationReform in 2012-2013 Accounting for Trends in ImmigrationReform in 2012-2013 Accounting for Trends in Immigration

  5. Negotiating Education Reform: Teacher Evaluations and Incentives in Chile (1990-2010)

    E-Print Network [OSTI]

    Mizala, Alejandra

    Reforms designed to improve the quality of teaching by reforming personnel practices, such as pay for performance arrangements, usually run into opposition from well-organized teacher unions that can either block reform ...

  6. Statutory Damages in Copyright Law: A Remedy in Need of Reform

    E-Print Network [OSTI]

    Samuelson, Pamela; Wheatland, Tara

    2009-01-01

    consider whether legislative reform of U.S. statutory damagewe consider whether statutory reform might be desirable toTo put our suggestions for reform of U.S. statutory damages

  7. The rules of ruling : charter reform in Los Angeles, 1850-2008

    E-Print Network [OSTI]

    Ingram, James Warren

    2008-01-01

    the Challenges of Charter Reform, Kevin F. McCarthy, Stevenof Los Angeles Charter Reform,” Appendix B of Meetingthe Challenges of Charter Reform, Kevin F. McCarthy, Steven

  8. Californians Newly Eligible for Medi-Cal under Health Care Reform

    E-Print Network [OSTI]

    Pourat, Nadereh; Martinez, Ana E.; Kominski, Gerald F.

    2011-01-01

    for Medi-Cal under Health Care Reform Nadereh Pourat, Ana E.implementation of health care reform by incorporating manyCal under Health Care Reform. Los Angeles, CA: UCLA Center

  9. Modernization and Post-1978 Chinese Educational Reform: Impact on a Migrating Population

    E-Print Network [OSTI]

    Deng, Weiling

    2013-01-01

    upon the new curricular reform in China. Curriculum,A. Park (Eds. ). Education and Reform in China, (pp. 27-43).in Chinese educational reform. Journal of Education Studies,

  10. Managing Multiple Mandates : : Teachers' Practice in the Nexus of Educational Reform

    E-Print Network [OSTI]

    Hasselbrink, Stephanie Lynn

    2014-01-01

    M. B. (1992). Getting reform right: What works and whatfor comprehensive school reform. In G. Orfield & E. H.Facts, not fads, in Title I reform (pp. 111-119). Cambridge,

  11. The Politics of School Reform: A Broader and Bolder Approach for Newark

    E-Print Network [OSTI]

    Noguera, Pedro A.; Wells, Lauren

    2011-01-01

    economy of urban educational reform. New York, NY: TeachersR. F. (2004). School reform from the inside out: Policy,The Politics of School Reform 23 Gonzalez, J. (2010, May

  12. Investigation of Bio-Ethanol Steam Reforming over Cobalt-based...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bio-Ethanol Steam Reforming over Cobalt-based Catalysts (Presentation) Investigation of Bio-Ethanol Steam Reforming over Cobalt-based Catalysts (Presentation) Presented at the 2007...

  13. Electricity reform in developing and transition countries: A reappraisal

    E-Print Network [OSTI]

    Kammen, Daniel M.

    Electricity reform in developing and transition countries: A reappraisal J.H. Williams, R. Ghanadan-3050, USA Abstract Since about 1990, many developing and transition countries have undertaken market-oriented reforms in their electric power sectors. Despite the widespread adoption of a standard policy model

  14. ISSN 1745-9648 Electricity Sector Reform in Greece

    E-Print Network [OSTI]

    Feigon, Brooke

    ISSN 1745-9648 Electricity Sector Reform in Greece by Ekaterini Iliadou Lawyer - Legal Department of the electricity market reform in Greece which started in 2001 and is still developing slowly. This is related to the persisting dominance of the incumbent company and the specificities of the electricity sector of Greece

  15. Electricity Reform Abroad and U.S. Investment

    Reports and Publications (EIA)

    1997-01-01

    Reviews and analyzes the recent electricity reforms in Argentina, Australia, and the United Kingdom in an attempt to better understand how different models of privatization and reform have worked in practice. This report also analyzes the motivations of the U.S. companies who have invested in the electricity industries of Argentina, Australia, and the United Kingdom.

  16. Oxidative Reforming of Biodiesel Over Molybdenum (IV) Oxide

    E-Print Network [OSTI]

    Collins, Gary S.

    molybdenum dioxide displays excellent behavior as catalytic material for the oxidative reforming of bothOxidative Reforming of Biodiesel Over Molybdenum (IV) Oxide Jessica Whalen, Oscar Marin Flores, Su candidate as an effective catalyst for biodiesel. Few papers have been published on the topic of catalytic

  17. Steam reforming of fuel to hydrogen in fuel cells

    DOE Patents [OSTI]

    Fraioli, Anthony V. (Hawthorne Woods, IL); Young, John E. (Woodridge, IL)

    1984-01-01

    A fuel cell capable of utilizing a hydrocarbon such as methane as fuel and having an internal dual catalyst system within the anode zone, the dual catalyst system including an anode catalyst supporting and in heat conducting relationship with a reforming catalyst with heat for the reforming reaction being supplied by the reaction at the anode catalyst.

  18. Steam reforming of fuel to hydrogen in fuel cell

    DOE Patents [OSTI]

    Young, J.E.; Fraioli, A.V.

    1983-07-13

    A fuel cell is described capable of utilizing a hydrocarbon such as methane as fuel and having an internal dual catalyst system within the anode zone, the dual catalyst system including an anode catalyst supporting and in heat conducting relationship with a reforming catalyst with heat for the reforming reaction being supplied by the reaction at the anode catalyst.

  19. HealtH reform and oHsu how we'll change

    E-Print Network [OSTI]

    Chapman, Michael S.

    HealtH reform and oHsu how we'll change Health reform will touch all of oHsu's missions. the coming will have to grow and adapt to meet new challenges. For years, health reform has been a political football for academic health centers like OHSU to truly lead. Reform will touch all of OHSU's missions. Our hospitals

  20. Paper ID #10519 Sustainable Reform of "Introductory Dynamics" Driven by a Community of

    E-Print Network [OSTI]

    West, Matthew

    Paper ID #10519 Sustainable Reform of "Introductory Dynamics" Driven by a Community of Practice;Sustainable Reform of Introductory Dynamics Driven by a Community of Practice Abstract The Strategic to initiate reforms, SIIP aims to improve the sustainability of reforms by forming Communities of Practice (Co

  1. 2007 DOE Bio-Derived Liquids to Hydrogen Distributed Reforming Working Group (BILIWG) Meeting

    E-Print Network [OSTI]

    )(organic fraction) DistillationDistillation Reformation of ethanolReformation of ethanol Biogas reformationBiogas Deactivation/Regeneration #12;Overview of the Economic Analysis Strategies Process Mass and Heat Balance for reaction and heating; Reformer is simulated as RYield with temperature at 450oC and furnace is simulated

  2. Thermally efficient melting and fuel reforming for glass making

    DOE Patents [OSTI]

    Chen, Michael S. (Zionsville, PA); Painter, Corning F. (Allentown, PA); Pastore, Steven P. (Allentown, PA); Roth, Gary S. (Trexlertown, PA); Winchester, David C. (Allentown, PA)

    1991-01-01

    An integrated process for utilizing waste heat from a glass making furnace. The hot off-gas from the furnace is initially partially cooled, then fed to a reformer. In the reformer, the partially cooled off-gas is further cooled against a hydrocarbon which is thus reformed into a synthesis gas, which is then fed into the glass making furnace as a fuel. The further cooled off-gas is then recycled back to absorb the heat from the hot off-gas to perform the initial cooling.

  3. Thermally efficient melting and fuel reforming for glass making

    DOE Patents [OSTI]

    Chen, M.S.; Painter, C.F.; Pastore, S.P.; Roth, G.S.; Winchester, D.C.

    1991-10-15

    An integrated process is described for utilizing waste heat from a glass making furnace. The hot off-gas from the furnace is initially partially cooled, then fed to a reformer. In the reformer, the partially cooled off-gas is further cooled against a hydrocarbon which is thus reformed into a synthesis gas, which is then fed into the glass making furnace as a fuel. The further cooled off-gas is then recycled back to absorb the heat from the hot off-gas to perform the initial cooling. 2 figures.

  4. The stability of coerced economic reform : the case of IPR

    E-Print Network [OSTI]

    Wilcox, Trudy

    2005-01-01

    Theories in international relations posit, and empirical evidence has verified, that unwilling states can be compelled by another state or by an international institution to enact domestic policy reform. However, these ...

  5. Estimate of resources required for a meaningful reform of education

    E-Print Network [OSTI]

    Glazek, Stanislaw D

    2012-01-01

    A simple estimate in terms of currency units shows that a meaningful educational reform process can be launched and sustained over many generations of teachers with support of parents of students. In the estimate, the steady inflow of resources from parents provides support for advanced studies by teachers. Not to waste the resources on spurious activities, the estimated inflow proceeds directly from the parents as clients to the providers of required reform program. The providers are the experts in various disciplines who excel in helping teachers become great. Their services to teachers are ultimately assessed by parents on the basis of changes in behavior of children. The resulting reform program grows slowly from small seeds. The running cost of the reform process to parents appears surprisingly low while its development leads to the desired changes over time.

  6. School Finance Reform: Do Equalized Expenditures Imply Equalized Teacher Salaries?

    E-Print Network [OSTI]

    Streams, Meg; Butler, J.S.; Cowen, Joshua; Fowles, Jacob; Toma, Eugenia T.

    2011-10-01

    school finance and curricular reform is highly salient for understanding teacher labor market dynamics. This study examines the time path of teacher salaries in Appalachian and non-Appalachian Kentucky using a novel teacher-level administrative data set...

  7. The NCAA's Academic Performance Program: Academic Reform or Academic Racism?

    E-Print Network [OSTI]

    Blackman, Phillip C.

    2008-01-01

    Academic Reform or Academic Racism? Phillip C. Blackman* I.or Merely to Promote Racism? ,14 N.Y.L Sch. J. Hum. Rts.and sorrowful continuation of racism in this country, this

  8. High Pressure Ethanol Reforming for Distributed Hydrogen Production

    Broader source: Energy.gov [DOE]

    Presentation by S. Ahmed and S.H.D. Lee at the October 24, 2006 Bio-Derived Liquids to Hydrogen Distributed Reforming Working Group Kick-Off Meeting.

  9. Process Reform, Security and Suitability- December 17, 2008

    Broader source: Energy.gov [DOE]

    This is to report on the progress made to improve the timeliness and effectiveness of our hiring and clearing decisions and the specific plan to reform the process further, in accordance with our initial proposals made in April ofthis year.

  10. Before the House Committee on Oversight and Government Reform...

    Broader source: Energy.gov (indexed) [DOE]

    Office of Nuclear Energy Before the House Committee on Oversight and Government Reform Subcommittee on the Interior 4-22-15JohnKotek FT HOGR.pdf More Documents &...

  11. Faculty perceptions of presidential leadership in urban school reform 

    E-Print Network [OSTI]

    McClendon, Rodney Prescott

    2009-06-02

    The study examined urban university faculty members’ perceptions of their presidents’ leadership role in urban school reform. The population for this study consisted of faculty members from five urban research universities. All of the universities...

  12. LAND REFORM IN NAMIBIA: AN ANALYSIS OF MEDIA COVERAGE

    E-Print Network [OSTI]

    Engelbrecht, Petrus J.

    2014-08-31

    in ensuring that land reform is successfully designed and executed. The media informs the public, sets the public and political agenda, holds the government accountable, and serves as a public sphere. This project analyses Namibia's three primary daily...

  13. Reforming the Power Sector in Transition: Do Institutions Matter?

    E-Print Network [OSTI]

    Nepal, Rabindra; Jamasb, Tooraj

    and Uzbekistan. Besides these countries, Turkey and Mongolia are also included in the group of transition economies as per European Bank of Reconstruction and Development (EBRD) areas of operation. 2 For instance, the oil and gas exports for Turkmenistan... ). Stiglitz (1999) argues that the enforcement mechanisms of reforms (including  power  sector  reforms) were weak  as  the  state’s  legal  and  judicial  capacities were  limited during the transition process brewing inefficient rent...

  14. New Voices in U.S. Immigration Debates: Latino and Asian American Attitudes Toward the Building Blocks of Comprehensive Immigration Reform

    E-Print Network [OSTI]

    DeSipio, Louis

    2014-01-01

    Louis. 2013. “Immigration Reforms from the Perspective ofthe Target of the Reform: Immigrant Generation and LatinoPreferences on Immigration Reform. ” In Gary P. Freeman,

  15. Media Framing Of U.S. Health Care Reform: A New Era Or Reinforcing Dominant Ideologies Of Health And The Health Care System?

    E-Print Network [OSTI]

    Jaworski, Beth Kristen

    2012-01-01

    values shaping today’s health reform debate. Health Affairs,back on health care reform: “No easy choices. ” Healthopinion and health care reform. Defining Ideas. Retrieved

  16. From the Frontlines to the Bottom Line: Medical Marijuana, the War on Drugs, and the Drug Policy Reform Movement

    E-Print Network [OSTI]

    Heddleston, Thomas Reed

    2012-01-01

    1993. “Cannabis: Legal Reform, Medicinal Use and HarmBruce 2004. "Drug Policy Reform and Its Detractors: TheRobins. 2003. Cannabis Law Reform in Canada: Is the “Saga of

  17. Identifying mistakes to discipline a New State : the rectification campaigns in China's land reform, 1946-1952

    E-Print Network [OSTI]

    He, Jiangsui

    2008-01-01

    de tudi gaige [The land reform during the war of liberation,Projects…………………………………..84 Chapter Three Land Reform andMistakes: Land Reform in Xigou………………………………87 I. Xigou and

  18. New Orleans Education Reform: A Guide for Cities or a Warning for Communities? (Grassroots Lessons Learned, 2005-2012)

    E-Print Network [OSTI]

    Buras, Kristen L.; Urban South Grassroots Research Collective, Members

    2013-01-01

    Orleans-style education reform: A guide for cities (Lessonspolitics of corporate school reform (pp. 160–188). New York,April 26). New Orleans school reform: Pass or fail? (Askwith

  19. A Family Affair: The Marriage of Elizabeth Cady and Henry Brewster Stanton and the Development of Reform Politics

    E-Print Network [OSTI]

    Frank, Linda Christine

    2012-01-01

    and the Crusade for Social Reform Hamilton, NY: Log Cabinof the splits within the reform-minded congregations. InElizur Wright and the Reform Impulse Kent, Ohio: The Kent

  20. Self-determination and student involvement in standards-based reform

    E-Print Network [OSTI]

    Wehmeyer, Michael L.; Field, Sharon; Doren, Bonnie; Jones, Bonnie; Mason, Christine

    2004-01-01

    of the current educational context. We particularly examine the role of promoting self-determination in light of federal standards-based reform initiatives. We conclude that school reform efforts provide an opportunity to infuse instruction in self...

  1. Heavy-Duty NOx Emissions Control: Reformer-Assisted vs. Plasma...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NOx Emissions Control: Reformer-Assisted vs. Plasma-Facilitated Lean NOx Catalysis Heavy-Duty NOx Emissions Control: Reformer-Assisted vs. Plasma-Facilitated Lean NOx Catalysis...

  2. Evaluating the Evidence on Electricity Reform: Lessons for the South East Europe (SEE) Market

    E-Print Network [OSTI]

    Pollitt, Michael G.

    This paper discusses the evidence on electricity reform and relates it to the current situation of the South East Europe (SEE) electricity market. We begin by discussing the main elements of the European Union (EU) electricity reform model. Then we...

  3. Reforming pharmaceutical regulation: a case study of generic drugs in Brazil 

    E-Print Network [OSTI]

    Fonseca, Elize Massard da

    2011-12-09

    Brazil is renowned worldwide for its remarkable reforms in pharmaceutical regulation, which have enhanced access to essential medicines while lowering drug costs. As part of these reforms, the Generic Drug Act was introduced in 1999. This policy...

  4. Reforming pharmaceutical regulation: a case study of generic drugs in Brazil 

    E-Print Network [OSTI]

    Fonseca, Elize Massard

    2012-06-29

    Brazil is renowned worldwide for its remarkable reforms in pharmaceutical regulation, which have enhanced access to essential medicines while lowering drug costs. As part of these reforms, the Generic Drug Act was ...

  5. 10 December 2009 Educators for Reform response to HEFCE Research Excellence Framework consultation

    E-Print Network [OSTI]

    Crowther, Paul

    1 10 December 2009 Educators for Reform response to HEFCE Research Excellence Framework that is already taking place in the private sector. Instead research funding should be reformed to give more

  6. Producing Clean Syngas via Catalytic Reforming for Fuels Production

    SciTech Connect (OSTI)

    Magrini, K. A.; Parent, Y.; Jablonski, W.; Yung, M.

    2012-01-01

    Thermochemical biomass conversion to fuels and chemicals can be achieved through gasification to syngas. The biomass derived raw syngas contains the building blocks of carbon monoxide and hydrogen as well as impurities such as tars, light hydrocarbons, and hydrogen sulfide. These impurities must be removed prior to fuel synthesis. We used catalytic reforming to convert tars and hydrocarbons to additional syngas, which increases biomass carbon utilization. In this work, nickel based, fluidizable tar reforming catalysts were synthesized and evaluated for tar and methane reforming performance with oak and model syngas in two types of pilot scale fluidized reactors (recirculating and recirculating regenerating). Because hydrogen sulfide (present in raw syngas and added to model syngas) reacts with the active nickel surface, regeneration with steam and hydrogen was required. Pre and post catalyst characterization showed changes specific to the syngas type used. Results of this work will be discussed in the context of selecting the best process for pilot scale demonstration.

  7. High performance internal reforming unit for high temperature fuel cells

    DOE Patents [OSTI]

    Ma, Zhiwen (Sandy Hook, CT); Venkataraman, Ramakrishnan (New Milford, CT); Novacco, Lawrence J. (Brookfield, CT)

    2008-10-07

    A fuel reformer having an enclosure with first and second opposing surfaces, a sidewall connecting the first and second opposing surfaces and an inlet port and an outlet port in the sidewall. A plate assembly supporting a catalyst and baffles are also disposed in the enclosure. A main baffle extends into the enclosure from a point of the sidewall between the inlet and outlet ports. The main baffle cooperates with the enclosure and the plate assembly to establish a path for the flow of fuel gas through the reformer from the inlet port to the outlet port. At least a first directing baffle extends in the enclosure from one of the sidewall and the main baffle and cooperates with the plate assembly and the enclosure to alter the gas flow path. Desired graded catalyst loading pattern has been defined for optimized thermal management for the internal reforming high temperature fuel cells so as to achieve high cell performance.

  8. Pyrochlore-type catalysts for the reforming of hydrocarbon fuels

    DOE Patents [OSTI]

    Berry, David A. (Morgantown, WV); Shekhawat, Dushyant (Morgantown, WV); Haynes, Daniel (Morgantown, WV); Smith, Mark (Morgantown, WV); Spivey, James J. (Baton Rouge, LA)

    2012-03-13

    A method of catalytically reforming a reactant gas mixture using a pyrochlore catalyst material comprised of one or more pyrochlores having the composition A.sub.2-w-xA'.sub.wA''.sub.xB.sub.2-y-zB'.sub.yB''.sub.zO.sub.7-.DELTA.. Distribution of catalytically active metals throughout the structure at the B site creates an active and well dispersed metal locked into place in the crystal structure. This greatly reduces the metal sintering that typically occurs on supported catalysts used in reforming reactions, and reduces deactivation by sulfur and carbon. Further, oxygen mobility may also be enhanced by elemental exchange of promoters at sites in the pyrochlore. The pyrochlore catalyst material may be utilized in catalytic reforming reactions for the conversion of hydrocarbon fuels into synthesis gas (H.sub.2+CO) for fuel cells, among other uses.

  9. The Church,the Councils,& Reform TheChurch,theCouncils,

    E-Print Network [OSTI]

    Pukelsheim, Friedrich

    The Church,the Councils,& Reform #12;#12;TheChurch,theCouncils, & Reform TheLegacyof the of Congress CaTaloging-in-PUbliCaTion DaTa The church,the councils,and reform:the legacy of the fifteenthPeCtIves Introduction 25 ThomasM.Izbicki 1. Councils of the Catholic Reformation:A Historical Survey 27 Nelson

  10. O'Leary unveils ambitious contract reform initiative

    SciTech Connect (OSTI)

    Lobsenz, G.

    1994-02-04

    This article describes DOE's program to reform contract management of its projects. The department will move away from its traditional cost-reimbursement management toward a performance-based management contract that sets clearer goals, incentives, and expectations for contractors. The key objectives are to better tie compensation to actual performance and make it clear that contractors will be responsible for any cost overruns. Another objective of the reform program is to rebid major contracts more often and to encourage more companies to seek DOE business.

  11. Heat exchanger for fuel cell power plant reformer

    DOE Patents [OSTI]

    Misage, Robert (Manchester, CT); Scheffler, Glenn W. (Tolland, CT); Setzer, Herbert J. (Ellington, CT); Margiott, Paul R. (Manchester, CT); Parenti, Jr., Edmund K. (Manchester, CT)

    1988-01-01

    A heat exchanger uses the heat from processed fuel gas from a reformer for a fuel cell to superheat steam, to preheat raw fuel prior to entering the reformer and to heat a water-steam coolant mixture from the fuel cells. The processed fuel gas temperature is thus lowered to a level useful in the fuel cell reaction. The four temperature adjustments are accomplished in a single heat exchanger with only three heat transfer cores. The heat exchanger is preheated by circulating coolant and purge steam from the power section during startup of the latter.

  12. Mexico's Energy Reform: What Does It Mean for Mexico and Beyond?

    E-Print Network [OSTI]

    Texas at Austin, University of

    Mexico's Energy Reform: What Does It Mean for Mexico and Beyond? The Mexican Senate is currently and Energy and Environment Program for a discussion on elements of the reform, questions for the road ahead, and the broader impacts of reform. The event will launch the Atlantic Council's new issue brief, Mexico Rising

  13. The effect of reformate gas enrichment on extinction limits and NOX formation

    E-Print Network [OSTI]

    Gülder, Ömer L.

    , known as reformate gas, contains not only hydrogen, but also carbon monoxide and some other components premixed combustion. When the reformate gas is added, the formation of NO is reduced in a near advantage of the reformate gas enriched lean premixed combustion is that it greatly reduces the formation

  14. Aalborg Universitet Methanol Reformer System Modeling and Control using an Adaptive Neuro-Fuzzy

    E-Print Network [OSTI]

    Andreasen, Søren Juhl

    by a catalytic burner, which uses the excess hydrogen of the fuel cell. Figure 1 shows the reformer and fuel cellAalborg Universitet Methanol Reformer System Modeling and Control using an Adaptive Neuro., & Sahlin, S. L. (2012). Methanol Reformer System Modeling and Control using an Adaptive Neuro

  15. Catalytic activation and reforming of methane on supported palladium clusters Aritomo Yamaguchi, Enrique Iglesia *

    E-Print Network [OSTI]

    Iglesia, Enrique

    Catalytic activation and reforming of methane on supported palladium clusters Aritomo Yamaguchi and 13 C18 O, and 13 CO and 12 CO during CH4 reforming catalysis. This catalytic sequence, but do not contribute to steady-state catalytic reforming rates. The high reactivity of Pd surfaces in C

  16. Health Care Reform: What School Mental Health Professionals Need to Know

    E-Print Network [OSTI]

    Weber, David J.

    Health Care Reform: What School Mental Health Professionals Need to Know On March 23, 2010, President Obama signed comprehensive health care reform, the Patient Protection and Affordable Care Act (ACA), into law (P.L. 111-148). This major reform to health care certainly has had and will continue to have

  17. OFQUAL Consultation on A-Level Reform Response from the London Mathematical Society

    E-Print Network [OSTI]

    Abrahams, I. David

    1 OFQUAL Consultation on A-Level Reform Response from the London Mathematical Society The present administration signalled clearly when in opposition that they wished to `reform' the existing A level structure by academics over a number of years. The consequent `reform' is therefore a matter of profound importance

  18. August 15, 2013 Bargaining Update 8: UC stresses fair compensation and reasonable pension reform

    E-Print Network [OSTI]

    Leistikow, Bruce N.

    reform UC stressed with the California Nurses Association on Aug. 6-8, 2013 the need to reach a fair's market. UC's pension reform proposal calls for: · Employees hired before July 1, 2013: UC would in substantive negotiations over responsible and necessary pension reform. CNA has not accepted UC's pension

  19. The New York Times > Opinion > Making Votes Count: Voting Reform Could Backfire May 9, 2004

    E-Print Network [OSTI]

    Rivest, Ronald L.

    The New York Times > Opinion > Making Votes Count: Voting Reform Could Backfire May 9, 2004 MAKING VOTES COUNT Voting Reform Could Backfire n 2000, untold thousands of eligible voters were prevented from. This is an important reform, but unless it is done right, provisional ballots could actually disenfranchise many

  20. Report of the Ad Hoc Committee on Washington Natural Resource Agency Reform

    E-Print Network [OSTI]

    Brown, Sally

    Report of the Ad Hoc Committee on Washington Natural Resource Agency Reform February 16, 2010 of the Environment (CoEnv) to make useful contributions to the Governor's natural resource agency reform initiative. As a result, the Washington Natural Resource Agency Reform ad hoc Committee was established and given

  1. WELLCOME TRUST CONSULTATION RESPONSE Wellcome Trust response to the Reform of the National Curriculum in England

    E-Print Network [OSTI]

    Rambaut, Andrew

    WELLCOME TRUST CONSULTATION RESPONSE Wellcome Trust response to the Reform of the National Curriculum in England April 2013 1 Department for Education: Reform of the National Curriculum in England CONSULTATION RESPONSE Wellcome Trust response to the Reform of the National Curriculum in England April 2013 2

  2. Inaugural Lecture The Politics of Belief and U.S. Health Care Reform

    E-Print Network [OSTI]

    Oxford, University of

    1 Inaugural Lecture The Politics of Belief and U.S. Health Care Reform Joseph White Ph.D John G reform is, for this purpose, a useful case study. Yet I will not talk only about that conflict. I also will not pretend to fully explain the politics of health care reform in the U.S.. I could make many other caveats

  3. `Pure air, pure water and good light' Sanitary reform in the Dublin hospitals, 1858-1898

    E-Print Network [OSTI]

    `Pure air, pure water and good light' Sanitary reform in the Dublin hospitals, 1858-1898 Irish Centre for Nursing & Midwifery History Spring-summer Seminar series Sanitary reform in the Dublin and hospital sanitation `Pure air, pure water and good light' Sanitary reform in the Dublin hospitals, 1858

  4. Wellcome Trust CONSULTATION RESPONSE Wellcome Trust response to Ofqual's GCSE reform consultation -August 2013

    E-Print Network [OSTI]

    Rambaut, Andrew

    Wellcome Trust CONSULTATION RESPONSE Wellcome Trust response to Ofqual's GCSE reform consultation - August 2013 1 Ofqual: GCSE reform consultation Response by the Wellcome Trust August 2013 Key points and indirect practical assessment in its reform proposals. The total contribution of direct and indirect

  5. A Proposal to Reform the Kyoto Protocol: the Role of Escape Clauses and Foresight

    E-Print Network [OSTI]

    Karp, Larry S.

    A Proposal to Reform the Kyoto Protocol: the Role of Escape Clauses and Foresight Larry Karp University of California, Berkeley Jinhua Zhao Iowa Sate University February 23, 2007 Abstract A reform be designed. We propose a reform to the Kyoto Proto- col that allows signatories to avoid achieving the target

  6. Bureaucratic Reform and E-Government in the United States: An Institutional Perspective

    E-Print Network [OSTI]

    Schweik, Charles M.

    Bureaucratic Reform and E-Government in the United States: An Institutional Perspective Jane E. #12;Bureaucratic Reform and E-Government in the United States: An Institutional Perspective Jane E perspective on e-government can provide important insights into bureaucratic reform, political development

  7. The Rhetoric of Science Education Reform Paper presentation prepared for the annual meeting

    E-Print Network [OSTI]

    Cobern, William W.

    1 The Rhetoric of Science Education Reform Paper presentation prepared for the annual meeting. W. (2000, Nov). The rhetoric of science education reform. The Physics Teacher, 38, 20-21. William W, when has there ever not been reform movement in science education? Leon M. Lederman, Nobel Prize

  8. Addressing the Needs of Students Living in Poverty through Comprehensive School Reform

    E-Print Network [OSTI]

    Walker, Lawrence R.

    Addressing the Needs of Students Living in Poverty through Comprehensive School Reform Joseph John had 100% of their students qualifying for FRL. Nationally, Comprehensive School Reform efforts, which proposes a Full Service Community Schools model for Comprehensive School Reform, and (b) AB 448

  9. Copyright reform on the EU level European Network for Copyright in support of

    E-Print Network [OSTI]

    Kuhlen, Rainer

    Copyright reform on the EU level European Network for Copyright in support of Education and Budapest Business School #12;Copyright reform on the EU level What can science and education expect from a copyright reform on the EU level? Rainer Kuhlen University of Konstanz, HumboldtUniversity Berlin, IPR

  10. The Employers' Proposals for Reform of USS A Summary for USS Members

    E-Print Network [OSTI]

    Daley, Monica A.

    1 The Employers' Proposals for Reform of USS A Summary for USS Members Universities UK, on behalf and the Pensions Regulator and to negotiation with UCU and so may change. Why is reform necessary? In short will be based on final pensionable salary at the date the reforms come into effect and revalued each year

  11. Volume 8, Issue 1 2010 Article 8 THE POLITICS OF HEALTH CARE REFORM

    E-Print Network [OSTI]

    Gelman, Andrew

    Volume 8, Issue 1 2010 Article 8 The Forum THE POLITICS OF HEALTH CARE REFORM Public Opinion on Health Care Reform Andrew Gelman, Columbia University Daniel Lee, Columbia University Yair Ghitza Opinion on Health Care Reform," The Forum: Vol. 8: Iss. 1, Article 8. DOI: 10

  12. The contribution of Internet electronic commerce to advanced supply chain reform -a case study

    E-Print Network [OSTI]

    Kurnia, Sherah

    Chapter 13 The contribution of Internet electronic commerce to advanced supply chain reform retailers and distributors in implementing supply chain reforms. Unwillingness on the part of SMEs to adopt enabling role for advanced supply chain reforms. We begin by describing in detail a new distribution

  13. Method for improving catalyst function in auto-thermal and partial oxidation reformer-based processors

    DOE Patents [OSTI]

    Ahmed, Shabbir; Papadias, Dionissios D.; Lee, Sheldon H.D.; Ahluwalia, Rajesh K.

    2014-08-26

    The invention provides a method for reforming fuel, the method comprising contacting the fuel to an oxidation catalyst so as to partially oxidize the fuel and generate heat; warming incoming fuel with the heat while simultaneously warming a reforming catalyst with the heat; and reacting the partially oxidized fuel with steam using the reforming catalyst.

  14. Solar Reforming of Carbon Dioxide to Produce Diesel Fuel

    SciTech Connect (OSTI)

    Dennis Schuetzle; Robert Schuetzle

    2010-12-31

    This project focused on the demonstration of an innovative technology, referred to as the Sunexus CO2 Solar Reformer, which utilizes waste CO2 as a feedstock for the efficient and economical production of synthetic diesel fuel using solar thermal energy as the primary energy input. The Sunexus technology employs a two stage process for the conversion of CO2 to diesel fuel. A solar reforming system, including a specially designed reactor and proprietary CO2 reforming catalyst, was developed and used to convert captured CO2 rich gas streams into syngas (primarily hydrogen and carbon monoxide) using concentrated solar energy at high conversion efficiencies. The second stage of the system (which has been demonstrated under other funding) involves the direct conversion of the syngas into synthetic diesel fuel using a proprietary catalyst (Terra) previously developed and validated by Pacific Renewable Fuels and Chemicals (PRFC). The overall system energy efficiency for conversion of CO2 to diesel fuel is 74%, due to the use of solar energy. The results herein describe modeling, design, construction, and testing of the Sunexus CO2 Solar Reformer. Extensive parametric testing of the solar reformer and candidate catalysts was conducted and chemical kinetic models were developed. Laboratory testing of the Solar Reformer was successfully completed using various gas mixtures, temperatures, and gas flow rates/space velocities to establish performance metrics which can be employed for the design of commercial plants. A variety of laboratory tests were conducted including dry reforming (CO2 and CH{sub 4}), combination dry/steam reforming (CO2, CH{sub 4} & H{sub 2}O), and tri-reforming (CO2, CH{sub 4}, H{sub 2}O & O{sub 2}). CH{sub 4} and CO2 conversions averaged 95-100% and 50-90% per reformer cycle, respectively, depending upon the temperatures and gas space velocities. No formation of carbon deposits (coking) on the catalyst was observed in any of these tests. A 16 ft. diameter, concentrating solar dish was modified to accommodate the Sunexus CO2 Solar Reformer and the integrated system was installed at the Pacific Renewable Fuels and Chemicals test site at McClellan, CA. Several test runs were conducted without catalyst during which the ceramic heat exchanger in the Sunexus Solar Reformer reached temperatures between 1,050 F (566 C) and 2,200 F (1,204 C) during the test period. A dry reforming mixture of CO2/CH{sub 4} (2.0/1.0 molar ratio) was chosen for all of the tests on the integrated solar dish/catalytic reformer during December 2010. Initial tests were carried out to determine heat transfer from the collimated solar beam to the catalytic reactor. The catalyst was operated successfully at a steady-state temperature of 1,125 F (607 C), which was sufficient to convert 35% of the 2/1 CO2/CH{sub 4} mixture to syngas. This conversion efficiency confirmed the results from laboratory testing of this catalyst which provided comparable syngas production efficiencies (40% at 1,200 F [650 C]) with a resulting syngas composition of 20% CO, 16% H{sub 2}, 39% CO2 and 25% CH{sub 4}. As based upon the laboratory results, it is predicted that 90% of the CO2 will be converted to syngas in the solar reformer at 1,440 F (782 C) resulting in a syngas composition of 50% CO: 43% H{sub 2}: 7% CO2: 0% CH{sub 4}. Laboratory tests show that the higher catalyst operating temperature of 1,440 F (782 C) for efficient conversion of CO2 can certainly be achieved by optimizing solar reactor heat transfer, which would result in the projected 90% CO2-to-syngas conversion efficiencies. Further testing will be carried out during 2011, through other funding support, to further optimize the solar dish CO2 reformer. Additional studies carried out in support of this project and described in this report include: (1) An Assessment of Potential Contaminants in Captured CO2 from Various Industrial Processes and Their Possible Effect on Sunexus CO2 Reforming Catalysts; (2) Recommended Measurement Methods for Assessing Contaminant Levels in Captured CO2 Streams; (3) An Asse

  15. ISSN 1745-9648 Electricity Reform in Serbia

    E-Print Network [OSTI]

    Feigon, Brooke

    ISSN 1745-9648 Electricity Reform in Serbia by Sandra Jednak Faculty of Organizational Sciences in Serbia have been started, and certain results were achieved. But, the electric power infrastructure decided whether the Serbian Electric Power Industry will be privatised, and if it is privatised which

  16. ISSN 1745-9648 Electricity Reform in Romania

    E-Print Network [OSTI]

    Feigon, Brooke

    ISSN 1745-9648 Electricity Reform in Romania by Oana Diaconu Department of Economics and Management-11 Abstract: Romania is a net exporter of electricity to the SE Europe region. Its performance of this role for international transmission. Romania has committed itself to an electricity restructuring plan that includes

  17. Understanding electricity market reforms and the case of Philippine deregulation

    SciTech Connect (OSTI)

    Santiago, Andrea; Roxas, Fernando

    2010-03-15

    The experience of the Philippines offers lessons that should be relevant to any country seeking to deregulate its power industry. Regardless of structure, consumers must face the real price of electricity production and delivery that is closer to marginal cost. Politically motivated prices merely shift the burden from ratepayers to taxpayers. And any reform should work within a reasonable timetable. (author)

  18. Steam Reforming of Low-Level Mixed Waste

    SciTech Connect (OSTI)

    1998-01-01

    Under DOE Contract No. DE-AR21-95MC32091, Steam Reforming of Low-Level Mixed Waste, ThermoChem has successfully designed, fabricated and operated a nominal 90 pound per hour Process Development Unit (PDU) on various low-level mixed waste surrogates. The design construction, and testing of the PDU as well as performance and economic projections for a 500- lb/hr demonstration and commercial system are described. The overall system offers an environmentally safe, non-incinerating, cost-effective, and publicly acceptable method of processing LLMW. The steam-reforming technology was ranked the No. 1 non-incineration technology for destruction of hazardous organic wastes in a study commissioned by the Mixed Waste Focus Area published April 1997.1 The ThermoChem steam-reforming system has been developed over the last 13 years culminating in this successful test campaign on LLMW surrogates. Six surrogates were successfidly tested including a 750-hour test on material simulating a PCB- and Uranium- contaminated solid waste found at the Portsmouth Gaseous Diffusion Plant. The test results indicated essentially total (>99.9999oA) destruction of RCRA and TSCA hazardous halogenated organics, significant levels of volume reduction (> 400 to 1), and retention of radlonuclides in the volume-reduced solids. Cost studies have shown the steam-reforming system to be very cost competitive with more conventional and other emerging technologies.

  19. First Generation Indian External Sector Reforms in Context

    E-Print Network [OSTI]

    Bhala, Raj

    2013-01-01

    India's first generation external sector reforms are a fascinating case study of emergence from a post-Independence socialist-style economy to the world’s largest free market democracy. Part I of this article reviews the Indian license Raj system...

  20. Land reform, regional planning and socioeconomic development in Brazil

    E-Print Network [OSTI]

    Souza, Saulo

    2011-01-11

    : i) The scope for plan-led strategies towards sustainable development in the countryside has been given less than sufficient emphasis in the land reform literature; ii) There is not clear evidence that the market-based approach leads to higher...

  1. AAPT Philadelphia 1/02 Gender, Educational Reform,

    E-Print Network [OSTI]

    Wu, Mingshen

    AAPT Philadelphia 1/02 Gender, Educational Reform, and Instructional Assessment: Part I Laura McCullough, UW-Stout Catherine H. Crouch, Harvard Univ. #12;AAPT Philadelphia 1/02 Is there a gender problem, 1999) found gender difference on FCI pretest, little difference on post-test #12;AAPT Philadelphia 1

  2. Catalytic Membrane Reactor for Extraction of Hydrogen from Bioethanol Reforming 

    E-Print Network [OSTI]

    Kuncharam, Bhanu Vardhan

    2013-11-26

    -gas-shift catalytic membrane reactor, and (2) a multi-layer design for bioethanol reforming. A two-dimensional model is developed to describe reaction and diffusion in the catalytic membrane coupled with plug-flow equations in the retentate and permeate volumes using...

  3. Hydrogen production with a solar steammethanol reformer and colloid nanocatalyst

    E-Print Network [OSTI]

    Daraio, Chiara

    and Process Engineering, Laboratory of Thermodynamics in Emerging Technologies, CH-8092 Zurich, Switzerland carried out [7,8] to improve the reforming system efficiency. Energy for the endothermic steam rights reserved. doi:10.1016/j.ijhydene.2009.10.083 #12;Using concentrated solar energy to provide energy

  4. Reforming designs: education and training in Scotland and Higher Still 

    E-Print Network [OSTI]

    Howieson, Cathy

    2008-01-01

    and economic stance, and its current preoccupations and ambitions for itself. Thus the thesis uses the example of the Higher Still reform of post compulsory education and training in Scotland (from 1999 onwards) to reflect more generally on education and social...

  5. Reformed Epistemology and the Epistemic Status of Religious Belief 

    E-Print Network [OSTI]

    Bolos, Anthony

    2009-11-26

    I discuss the reformed epistemologist and his claim that one is within one’s epistemic rights in believing in God without any evidence or argument. The basis for this claim hinges on a parity argument that compares one’s perceptual experiences...

  6. Financial and ratepayer impacts of nuclear power plant regulatory reform

    SciTech Connect (OSTI)

    Turpin, A.G.

    1985-01-01

    Three reports - ''The Future Market for Electric Generating Capacity,'' ''Quantitative Analysis of Nuclear Power Plant Licensing Reform,'' and ''Nuclear Rate Increase Study'' are recent studies performed by the Los Alamos National Laboratory that deal with nuclear power. This presents a short summary of these three studies. More detail is given in the reports.

  7. 976 JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, VOL. 15, NO. 4, AUGUST 2006 Methanol Steam Reformer on a Silicon Wafer

    E-Print Network [OSTI]

    Malen, Jonathan A.

    of the reforming rates, heat transfer and flow through a methanol reforming catalytic microreactor fabri- cated976 JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, VOL. 15, NO. 4, AUGUST 2006 Methanol Steam Reformer is achieved through on-chip resis- tive heaters, whereby methanol steam reforming reactions were studied over

  8. 72737Federal Register / Vol. 73, No. 231 / Monday, December 1, 2008 / Rules and Regulations comprehensive reform efforts, the Joint

    E-Print Network [OSTI]

    comprehensive reform efforts, the Joint Board issued a recommended decision on November 20, 2007. The Universal-cost support and to reform the high-cost mechanisms. Specifically, the Universal Service Joint Board Board Comprehensive Reform NPRM, seeking comment on the Joint Board's Comprehensive Reform Recommended

  9. Wellcome Trust CONSULTATION RESPONSE Wellcome Trust response to Ofqual Consultation: Completing GCSE, AS and A Level Reform -July 2014

    E-Print Network [OSTI]

    Rambaut, Andrew

    GCSE, AS and A Level Reform - July 2014 1 Ofqual: Completing GCSE, AS and A Level Reform Response core content in partnership does not deter exam boards from reforming worthwhile qualifications. 5: Completing GCSE, AS and A Level Reform - July 2014 2 6. Under the new proposals, exam boards will be required

  10. Negative Valve Overlap Reforming Chemistry in Low-Oxygen Environments

    SciTech Connect (OSTI)

    Szybist, James P [ORNL] [ORNL; Steeper, Richard R. [Sandia National Laboratories (SNL)] [Sandia National Laboratories (SNL); Splitter, Derek A [ORNL] [ORNL; Kalaskar, Vickey B [ORNL] [ORNL; Pihl, Josh A [ORNL] [ORNL; Daw, C Stuart [ORNL] [ORNL

    2014-01-01

    Fuel injection into the negative valve overlap (NVO) period is a common method for controlling combustion phasing in homogeneous charge compression ignition (HCCI) and other forms of advanced combustion. When fuel is injected into O2-deficient NVO conditions, a portion of the fuel can be converted to products containing significant levels of H2 and CO. Additionally, other short chain hydrocarbons are produced by means of thermal cracking, water-gas shift, and partial oxidation reactions. The present study experimentally investigates the fuel reforming chemistry that occurs during NVO. To this end, two very different experimental facilities are utilized and their results are compared. One facility is located at Oak Ridge National Laboratory, which uses a custom research engine cycle developed to isolate the NVO event from main combustion, allowing a steady stream of NVO reformate to be exhausted from the engine and chemically analyzed. The other experimental facility, located at Sandia National Laboratories, uses a dump valve to capture the exhaust from a single NVO event for analysis. Results from the two experiments are in excellent trend-wise agreement and indicate that the reforming process under low-O2 conditions produces substantial concentrations of H2, CO, methane, and other short-chain hydrocarbon species. The concentration of these species is found to be strongly dependent on fuel injection timing and injected fuel type, with weaker dependencies on NVO duration and initial temperature, indicating that NVO reforming is kinetically slow. Further, NVO reforming does not require a large energy input from the engine, meaning that it is not thermodynamically expensive. The implications of these results on HCCI and other forms of combustion are discussed in detail.

  11. Fuel cell system with combustor-heated reformer

    DOE Patents [OSTI]

    Pettit, William Henry (Rochester, NY)

    2000-01-01

    A fuel cell system including a fuel reformer heated by a catalytic combustor fired by anode effluent and/or fuel from a liquid fuel supply providing fuel for the fuel cell. The combustor includes a vaporizer section heated by the combustor exhaust gases for vaporizing the fuel before feeding it into the combustor. Cathode effluent is used as the principle oxidant for the combustor.

  12. Regulatory and Financial Reform of Federal Research Policy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy BillsNo. 195 - Oct. 7,DOERTIRegulatory and Financial Reform of Federal

  13. Hiring Reform Memoranda and Action Plan | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergy HeadquartersFuelB IMSofNewsletterGuiding SSLHanfordHomesHiring Reform Memoranda and

  14. IT Reform at the Department of Energy | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergy HeadquartersFuelBConservation Standards and TestEquipment: Energy ConservationReform at

  15. Steam reforming of low-level mixed waste. Final report

    SciTech Connect (OSTI)

    1998-06-01

    ThermoChem has successfully designed, fabricated and operated a nominal 90 pound per hour Process Development Unit (PDU) on various low-level mixed waste surrogates. The design, construction, and testing of the PDU as well as performance and economic projections for a 300-lb/hr demonstration and commercial system are described. The overall system offers an environmentally safe, non-incinerating, cost-effective, and publicly acceptable method of processing LLMW. The steam-reforming technology was ranked the No. 1 non-incineration technology for destruction of hazardous organic wastes in a study commissioned by the Mixed Waste Focus Area and published in April 1997. The ThermoChem steam-reforming system has been developed over the last 13 years culminating in this successful test campaign on LLMW surrogates. Six surrogates were successfully tested including a 750-hour test on material simulating a PCB- and Uranium-contaminated solid waste found at the Portsmouth Gaseous Diffusion Plant. The test results indicated essentially total (> 99.9999%) destruction of RCRA and TSCA hazardous halogenated organics, significant levels of volume reduction (> 400 to 1), and retention of radionuclides in the volume-reduced solids. Economic evaluations have shown the steam-reforming system to be very cost competitive with more conventional and other emerging technologies.

  16. Electrochemical cell apparatus having an integrated reformer-mixer nozzle-mixer diffuser

    DOE Patents [OSTI]

    Shockling, L.A.

    1991-09-10

    An electrochemical apparatus is made having a generator section containing electrochemical cells, a fresh gaseous feed fuel inlet, a gaseous feed oxidant inlet, and at least one hot gaseous spent fuel recirculation channel, where the spent fuel recirculation channel, passes from the generator chamber to combine with the fresh feed fuel inlet to form a reformable mixture, where a reforming chamber contains an outer portion containing reforming material, an inner portion preferably containing a mixer nozzle and a mixer-diffuser, and a middle portion for receiving spent fuel, where the mixer nozzle and mixer-diffuser are preferably both within the reforming chamber and substantially exterior to the main portion of the apparatus, where the reformable mixture flows up and then backward before contacting the reforming material, and the mixer nozzle can operate below 400 C. 1 figure.

  17. Application of a Diesel Fuel Reformer for Tier 2 Bin 5 Emissions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2005 Diesel Engine Emissions Reduction (DEER) Conference Presentations and Posters 2005deerbonadies.pdf More Documents & Publications Application of a Diesel Fuel Reformer for...

  18. A Fast Start-up On-Board Fuel Reformer for NOx Adsorber Regeneration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for NOx Adsorber Regeneration and Desulfation A Fast Start-up On-Board Fuel Reformer for NOx Adsorber Regeneration and Desulfation 2004 Diesel Engine Emissions Reduction (DEER)...

  19. Regulatory Reform in the Wake of the Financial Crisis of 2007—2008

    E-Print Network [OSTI]

    Lo, Andrew W.

    Purpose – The purpose of this paper is to analyse regulatory reform in the wake of the financial crisis of 2007-2008.

  20. Fuel-flexible partial oxidation reforming of hydrocarbons for automotive applications.

    SciTech Connect (OSTI)

    Ahmed, S.; Carter, J. D.; Kopasz, J. P.; Krumpelt, M.; Wilkenhoener, R.

    1999-06-07

    Micro-reactor tests indicate that our partial oxidation catalyst is fuel-flexible and can reform conventional (gasoline and diesel) and alternative (ethanol, methanol, natural gas) fuels to hydrogen rich product gases with high hydrogen selectivity. Alcohols are reformed at lower temperatures (< 600 C) while alkanes and unsaturated hydrocarbons require slightly higher temperatures. Cyclic hydrocarbons and aromatics have also been reformed at relatively low temperatures, however, a different mechanism appears to be responsible for their reforming. Complex fuels like gasoline and diesel, which are mixtures of a broad range of hydrocarbons, require temperatures of > 700 C for maximum hydrogen production.

  1. Immigration Reform and the Earnings of Latino Workers: Do Employer Sanctions Cause Discrimination?

    E-Print Network [OSTI]

    BANSAK, CYNTHIA A; Raphael, Steven

    1998-01-01

    the Effects of Employer Sanctions Using Alternative Single-Immigration Reform: Employer Sanctions and the Question ofLATINO WORKERS: DO EMPLOYER SANCTIONS CAUSE DISCRIMINATION?

  2. The Resurgence of Land Reform Policy and Agrarian Movements in Indonesia

    E-Print Network [OSTI]

    Rachman, Noer Fauzi

    2011-01-01

    Land Reforms. Defects in Agrarian Structure as Obstacles tocolonial and feudal agrarian structures Indonesia inheritedthat “defects in agrarian structure, and in particular

  3. Electrochemical fuel cell generator having an internal and leak tight hydrocarbon fuel reformer

    DOE Patents [OSTI]

    Dederer, J.T.; Hager, C.A.

    1998-03-31

    An electrochemical fuel cell generator configuration is made having a generator section which contains a plurality of axially elongated fuel cells, each cell containing a fuel electrode, air electrode, and solid oxide electrolyte between the electrodes, in which axially elongated dividers separate portions of the fuel cells from each other, and where at least one divider also reforms a reformable fuel gas mixture prior to electricity generation reactions, the at least one reformer-divider is hollow having a closed end and an open end entrance for a reformable fuel mixture to pass to the closed end of the divider and then reverse flow and pass back along the hollowed walls to be reformed, and then finally to pass as reformed fuel out of the open end of the divider to contact the fuel cells, and further where the reformer-divider is a composite structure having a gas diffusion barrier of metallic foil surrounding the external walls of the reformer-divider except at the entrance to prevent diffusion of the reformable gas mixture through the divider, and further housed in an outer insulating jacket except at the entrance to prevent short-circuiting of the fuel cells by the gas diffusion barrier. 10 figs.

  4. Corporate governance reform in a developing country : the case of Bangladesh 

    E-Print Network [OSTI]

    Sobhan, Md. Abdus

    2014-07-02

    Bangladesh reformed its corporate governance by adopting Bangladesh Corporate Governance Guidelines-2006 (the BCGG-2006 hereafter) due to pressures from international financial institutions (IFIs). However, there is huge ...

  5. Hydrogen Generation from Biomass-Derived Carbohydrates via Aqueous-Phase Reforming

    Broader source: Energy.gov [DOE]

    Presentation by Virent Energy Systems, Inc. at the October 24, 2006 Bio-Derived Liquids to Hydrogen Distributed Reforming Working Group Kick-Off Meeting.

  6. The Lessons of Practice: Domestic Policy Reform as a Way to Address...

    Open Energy Info (EERE)

    The Lessons of Practice: Domestic Policy Reform as a Way to Address Climate Change Jump to: navigation, search Tool Summary LAUNCH TOOL Name: The Lessons of Practice: Domestic...

  7. Electrochemical fuel cell generator having an internal and leak tight hydrocarbon fuel reformer

    DOE Patents [OSTI]

    Dederer, Jeffrey T. (Valencia, PA); Hager, Charles A. (Mars, PA)

    1998-01-01

    An electrochemical fuel cell generator configuration is made having a generator section which contains a plurality of axially elongated fuel cells, each cell containing a fuel electrode, air electrode, and solid oxide electrolyte between the electrodes, in which axially elongated dividers separate portions of the fuel cells from each other, and where at least one divider also reforms a reformable fuel gas mixture prior to electricity generation reactions, the at least one reformer-divider is hollow having a closed end and an open end entrance for a reformable fuel mixture to pass to the closed end of the divider and then reverse flow and pass back along the hollowed walls to be reformed, and then finally to pass as reformed fuel out of the open end of the divider to contact the fuel cells, and further where the reformer-divider is a composite structure having a gas diffusion barrier of metallic foil surrounding the external walls of the reformer-divider except at the entrance to prevent diffusion of the reformable gas mixture through the divider, and further housed in an outer insulating jacket except at the entrance to prevent short-circuiting of the fuel cells by the gas diffusion barrier.

  8. The Ambiguous Transition: Building State Capacity and Expanding Popular Participation in Venezuela's Agrarian Reform

    E-Print Network [OSTI]

    Page, Tiffany Linton

    2011-01-01

    El Universal, Caracas, Venezuela. Bengelsdorf, Carollee.Crisis and Reform in Venezuela. ” Journal of Interamerican2):27-61. Datamonitor. (2004). “Venezuela Country Profile. ”

  9. Autothermal and partial oxidation reformer-based fuel processor, method for improving catalyst function in autothermal and partial oxidation reformer-based processors

    DOE Patents [OSTI]

    Ahmed, Shabbir; Papadias, Dionissios D.; Lee, Sheldon H. D.; Ahluwalia, Rajesh K.

    2013-01-08

    The invention provides a fuel processor comprising a linear flow structure having an upstream portion and a downstream portion; a first catalyst supported at the upstream portion; and a second catalyst supported at the downstream portion, wherein the first catalyst is in fluid communication with the second catalyst. Also provided is a method for reforming fuel, the method comprising contacting the fuel to an oxidation catalyst so as to partially oxidize the fuel and generate heat; warming incoming fuel with the heat while simultaneously warming a reforming catalyst with the heat; and reacting the partially oxidized fuel with steam using the reforming catalyst.

  10. High School Principals' Perceptions of Their Effectiveness in Leading District Initiated High School Reform: An Analysis of High School Principals Previously Engaged in High School Reform in an Urban Texas School District 

    E-Print Network [OSTI]

    Rios, Carlos

    2012-07-16

    school reform. However, to date, research has not provided examples of a successful relationship between campus principals as a collective group and the district (central office) leadership team attempting to implement district-wide high school reform...

  11. Columbia River Hatchery Reform System-Wide Report.

    SciTech Connect (OSTI)

    Warren, Dan

    2009-04-16

    The US Congress funded the Puget Sound and Coastal Washington Hatchery Reform Project via annual appropriations to the US Fish and Wildlife Service (USFWS) beginning in fiscal year 2000. Congress established the project because it recognized that while hatcheries have a necessary role to play in meeting harvest and conservation goals for Pacific Northwest salmonids, the hatchery system was in need of comprehensive reform. Most hatcheries were producing fish for harvest primarily to mitigate for past habitat loss (rather than for conservation of at-risk populations) and were not taking into account the effects of their programs on naturally spawning populations. With numerous species listed as threatened or endangered under the Endangered Species Act (ESA), conservation of salmon in the Puget Sound area was a high priority. Genetic resources in the region were at risk and many hatchery programs as currently operated were contributing to those risks. Central to the project was the creation of a nine-member independent scientific review panel called the Hatchery Scientific Review Group (HSRG). The HSRG was charged by Congress with reviewing all state, tribal and federal hatchery programs in Puget Sound and Coastal Washington as part of a comprehensive hatchery reform effort to: conserve indigenous salmonid genetic resources; assist with the recovery of naturally spawning salmonid populations; provide sustainable fisheries; and improve the quality and cost-effectiveness of hatchery programs. The HSRG worked closely with the state, tribal and federal managers of the hatchery system, with facilitation provided by the non-profit organization Long Live the Kings and the law firm Gordon, Thomas, Honeywell, to successfully complete reviews of over 200 hatchery programs at more than 100 hatcheries across western Washington. That phase of the project culminated in 2004 with the publication of reports containing the HSRG's principles for hatchery reform and recommendations for Puget Sound/Coastal Washington hatchery programs, followed by the development in 2005 of a suite of analytical tools to support application of the principles (all reports and tools are available at www.hatcheryreform.us). In 2005, Congress directed the National Oceanic and Atmospheric Administration-Fisheries (NOAA Fisheries) to replicate the Puget Sound and Coastal Washington Hatchery Reform Project in the Columbia River Basin. The HSRG was expanded to 14 members to include individuals with specific knowledge about the Columbia River salmon and steelhead populations. This second phase was initially envisioned as a one-year review, with emphasis on the Lower Columbia River hatchery programs. It became clear however, that the Columbia River Basin needed to be viewed as an inter-connected ecosystem in order for the review to be useful. The project scope was subsequently expanded to include the entire Basin, with funding for a second year provided by the Bonneville Power Administration (BPA) under the auspices of the Northwest Power and Conservation Council's (NPCC) Fish and Wildlife Program. The objective of the HSRG's Columbia River Basin review was to change the focus of the Columbia River hatchery system. In the past, these hatchery programs have been aimed at supplying adequate numbers of fish for harvest as mitigation primarily for hydropower development in the Basin. A new, ecosystem-based approach is founded on the idea that harvest goals are sustainable only if they are compatible with conservation goals. The challenge before the HSRG was to determine whether or not conservation and harvest goals could be met by fishery managers and, if so, how. The HSRG determined that in order to address these twin goals, both hatchery and harvest reforms are necessary. The HSRG approach represents an important change of direction in managing hatcheries in the region. It provides a clear demonstration that current hatchery programs can indeed be redirected to better meet both conservation and harvest goals. For each Columbia River Basin Environmentally Significant Unit

  12. National Development and Reform Commission | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland:NPI Ventures Ltd Jump to: navigation,Naples,Development and Reform Commission

  13. Establishment of Working Group* for the Reform of Engineering Training and Research and aligning it with Maharashtra's Development Needs**.

    E-Print Network [OSTI]

    Sohoni, Milind

    Establishment of Working Group* for the Reform of Engineering Training and Research and aligning in the reform program. 6. To conduct research and to make concrete recommendations to the following activities

  14. Distributed Reforming of Biomass Pyrolysis Oils: Cooperative Research and Development Final Report, CRADA number CRD-06-00192

    SciTech Connect (OSTI)

    Czernik, S.

    2010-07-01

    The objective of this project is for Chevron and NREL to collaborate in determining the effect of bio-oil composition variability on autothermal reforming performance including bio-oil volatilization, homogeneous oxidative cracking, and catalytic reforming.

  15. Electricity Markets: Should the Rest of the World Adopt the UK Reforms?

    E-Print Network [OSTI]

    California at Berkeley. University of

    PWP-069 Electricity Markets: Should the Rest of the World Adopt the UK Reforms? Catherine D;1 Electricity Markets: Should the Rest of the World Adopt the UK Reforms?1 By Catherine D. Wolfram2 Britain was one of the first countries to liberalize its electricity industry when it restructured and privatized

  16. A Planar Anode -Supported Solid Oxide Fuel Cell Model with Internal Reforming of Natural Gas

    E-Print Network [OSTI]

    Boyer, Edmond

    1 A Planar Anode - Supported Solid Oxide Fuel Cell Model with Internal Reforming of Natural Gas.brault@univ-orleans.fr Abstract Solid Oxide Fuel Cells (SOFCs) are of great interest due to their high energy efficiency, low, a mathematical model of a co - flow planar anode - supported solid oxide fuel cell with internal reforming

  17. Aalborg Universitet Initial experiments with a Pt based heat exchanger methanol reformer for a HTPEM fuel

    E-Print Network [OSTI]

    Andreasen, Søren Juhl

    for a HTPEM fuel cell system Andreasen, Søren Juhl Publication date: 2007 Document Version Author final reformer for a HTPEM fuel cell system. Poster session presented at HyFC Seminar 2007, Svendborg, Denmark exchanger methanol reformer for a HTPEM fuel cell system Søren Juhl Andreasen* Institute of Energy

  18. Tailored Macroporous SiCN and SiC Structures for High-Temperature Fuel Reforming**

    E-Print Network [OSTI]

    Kenis, Paul J. A.

    Tailored Macroporous SiCN and SiC Structures for High-Temperature Fuel Reforming** By In-Kyung Sung such as the reforming of hydrocarbon fuels (e.g., die- sel or JP-8) into hydrogen for use in portable power sources. Performing heterogeneous catalytic reactions in porous struc- tures at the microscale has certain advantages

  19. Aalborg Universitet Dynamic Modeling of a Reformed Methanol Fuel Cell System using Empirical Data and

    E-Print Network [OSTI]

    Berning, Torsten

    Aalborg Universitet Dynamic Modeling of a Reformed Methanol Fuel Cell System using Empirical Data Reza Published in: Journal of Fuel Cell Science and Technology DOI (link to publication from Publisher. K., Andreasen, S. J., & Shaker, H. R. (2014). Dynamic Modeling of a Reformed Methanol Fuel Cell

  20. Reforming a large lecture modern physics course for engineering majors using a PER-based design

    E-Print Network [OSTI]

    Colorado at Boulder, University of

    , modern physics, quantum mechanics PACS: 01.40.Di,01.40.Fk,01.40.G-,01.40.gb INTRODUCTION It is wellReforming a large lecture modern physics course for engineering majors using a PER-based design S Department of Physics, University of Colorado, Boulder, CO 80309, USA Abstract. We have reformed a large

  1. Aalborg Universitet Control of a methanol reformer system using an Adaptive NeuroFuzzy Inference

    E-Print Network [OSTI]

    Andreasen, Søren Juhl

    for a reformed methanol fuel cell system, which uses a reformer to produce hydrogen for an HTPEM fuel cell. One Exchange Membrane Fuel Cells, Copenhagen, Denmark. General rights Copyright and moral rights of the system. Modeling To avoid starving the fuel cell of hydrogen, it is important to know how much hydrogen

  2. Economic Growth, Poverty and Inequality: Indian Experience of Reforms and Development

    E-Print Network [OSTI]

    Krivobokova, Tatyana

    Economic Growth, Poverty and Inequality: Indian Experience of Reforms and Development Panchanan Das suggest that the faster economic growth causes higher incidence of poverty and inequality. Income inequality across regions is rising at an alarming rate due to higher economic growth during the reform

  3. Aalborg Universitet Control and experimental characterization of a methanol reformer for a 350W high

    E-Print Network [OSTI]

    Berning, Torsten

    , Pontoppidanstræde 101, 9220 Aalborg East, Denmarkp gy gy g y pp g Introd ction Steam reforming of methanol for a HTPEM f el cell stack ConclusionsIntroduction Steam reforming of methanol for a HTPEM fuel cell stack where heating, conduct detailed measurements of the fuel cells offer many evaporation and superheating

  4. Agenda Setting And The Role Of Leadership In National Health Care Reform During The Early 1990s

    E-Print Network [OSTI]

    Kang, Michael S,

    2006-01-05

    Health care reform was the dominant issue on the political agenda during the early 1990s. Few issues

  5. GOVERNMENT VERSUS GOVERNANCE AS A FRAMEWORK Government versus Governance as a Framework to analyze Mexico's Energy Reform

    E-Print Network [OSTI]

    Texas at Austin, University of

    branch, the oil company PEMEX' union, other critics of the reform among a part of the left party Partido

  6. HYDROGEN PRODUCTION FOR FUEL CELLS VIA REFORMING COAL-DERIVED METHANOL

    SciTech Connect (OSTI)

    Paul A. Erickson

    2006-04-01

    Hydrogen can be produced from many feedstocks including coal. The objectives of this project are to establish and prove a hydrogen production pathway from coal-derived methanol for fuel cell applications. This progress report is the tenth report submitted to the DOE reporting on the status and progress made during the course of the project. This report covers the time period of January 1-March 31, 2006. This quarter saw progress in six areas. These areas are: (1) The effect of catalyst dimension on steam reforming, (2) Transient characteristics of autothermal reforming, (3) Rich and lean autothermal reformation startup, (4) Autothermal reformation degradation with coal derived methanol, (5) Reformate purification system, and (6) Fuel cell system integration. All of the projects are proceeding on or slightly ahead of schedule.

  7. Hydrogen generation having CO.sub.2 removal with steam reforming

    SciTech Connect (OSTI)

    Kandaswamy, Duraiswamy; Chellappa, Anand S.; Knobbe, Mack

    2015-07-28

    A method for producing hydrogen using fuel cell off gases, the method feeding hydrocarbon fuel to a sulfur adsorbent to produce a desulfurized fuel and a spent sulfur adsorbent; feeding said desulfurized fuel and water to an adsorption enhanced reformer that comprises of a plurality of reforming chambers or compartments; reforming said desulfurized fuel in the presence of a one or more of a reforming catalyst and one or more of a CO.sub.2 adsorbent to produce hydrogen and a spent CO.sub.2 adsorbent; feeding said hydrogen to the anode side of the fuel cell; regenerating said spent CO.sub.2 adsorbents using the fuel cell cathode off-gases, producing a flow of hydrogen by cycling between said plurality of reforming chambers or compartments in a predetermined timing sequence; and, replacing the spent sulfur adsorbent with a fresh sulfur adsorbent at a predetermined time.

  8. Successes and Constraints in the Enactment of a Reform May Lee*, Melissa Dancy, Charles Henderson, and Eric Brewe

    E-Print Network [OSTI]

    Henderson, Charles

    Successes and Constraints in the Enactment of a Reform May Lee*, Melissa Dancy, Charles Henderson positive impacts of research-based instructional reforms in physics, few high school physics teachers in the US enact them. One of the more successfully disseminated reforms is Modeling Instruction. To discern

  9. Integrated solar thermochemical reaction system for steam methane reforming

    SciTech Connect (OSTI)

    Zheng, Feng; Diver, Rich; Caldwell, Dustin D.; Fritz, Brad G.; Cameron, Richard J.; Humble, Paul H.; TeGrotenhuis, Ward E.; Dagle, Robert A.; Wegeng, Robert S.

    2015-06-05

    Solar-aided upgrade of the energy content of fossil fuels, such as natural gas, can provide a near-term transition path towards a future solar-fuel economy and reduce carbon dioxide emission from fossil fuel consumption. Both steam and dry reforming a methane-containing fuel stream have been studied with concentrated solar power as the energy input to drive the highly endothermic reactions but the concept has not been demonstrated at a commercial scale. Under a current project with the U.S. Department of Energy, PNNL is developing an integrated solar thermochemical reaction system that combines solar concentrators with micro- and meso-channel reactors and heat exchangers to accomplish more than 20% solar augment of methane higher heating value. The objective of our three-year project is to develop and prepare for commercialization such solar reforming system with a high enough efficiency to serve as the frontend of a conventional natural gas (or biogas) combined cycle power plant, producing power with a levelized cost of electricity less than 6¢/kWh, without subsidies, by the year 2020. In this paper, we present results from the first year of our project that demonstrated a solar-to-chemical energy conversion efficiency as high as 69% with a prototype reaction system.

  10. Integrated solar thermochemical reaction system for steam methane reforming

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zheng, Feng; Diver, Rich; Caldwell, Dustin D.; Fritz, Brad G.; Cameron, Richard J.; Humble, Paul H.; TeGrotenhuis, Ward E.; Dagle, Robert A.; Wegeng, Robert S.

    2015-06-05

    Solar-aided upgrade of the energy content of fossil fuels, such as natural gas, can provide a near-term transition path towards a future solar-fuel economy and reduce carbon dioxide emission from fossil fuel consumption. Both steam and dry reforming a methane-containing fuel stream have been studied with concentrated solar power as the energy input to drive the highly endothermic reactions but the concept has not been demonstrated at a commercial scale. Under a current project with the U.S. Department of Energy, PNNL is developing an integrated solar thermochemical reaction system that combines solar concentrators with micro- and meso-channel reactors and heatmore »exchangers to accomplish more than 20% solar augment of methane higher heating value. The objective of our three-year project is to develop and prepare for commercialization such solar reforming system with a high enough efficiency to serve as the frontend of a conventional natural gas (or biogas) combined cycle power plant, producing power with a levelized cost of electricity less than 6¢/kWh, without subsidies, by the year 2020. In this paper, we present results from the first year of our project that demonstrated a solar-to-chemical energy conversion efficiency as high as 69% with a prototype reaction system.« less

  11. Modified Ni-Cu catalysts for ethanol steam reforming

    SciTech Connect (OSTI)

    Dan, M.; Mihet, M.; Almasan, V.; Borodi, G.; Katona, G.; Muresan, L.; Lazar, M. D.

    2013-11-13

    Three Ni-Cu catalysts, having different Cu content, supported on ?-alumina were synthesized by wet co-impregnation method, characterized and tested in the ethanol steam reforming (ESR) reaction. The catalysts were characterized for determination of: total surface area and porosity (N{sub 2} adsorption - desorption using BET and Dollimer Heal methods), Ni surface area (hydrogen chemisorption), crystallinity and Ni crystallites size (X-Ray Diffraction), type of catalytic active centers (Hydrogen Temperature Programmed Reduction). Total surface area and Ni crystallites size are not significantly influenced by the addition of Cu, while Ni surface area is drastically diminished by increasing of Cu concentration. Steam reforming experiments were performed at atmospheric pressure, temperature range 150-350°C, and ethanol - water molar ration of 1 at 30, using Ar as carrier gas. Ethanol conversion and hydrogen production increase by the addition of Cu. At 350°C there is a direct connection between hydrogen production and Cu concentration. Catalysts deactivation in 24h time on stream was studied by Transmission Electron Microscopy (TEM) and temperature-programmed reduction (TPR) on used catalysts. Coke deposition was observed at all studied temperatures; at 150°C amorphous carbon was evidenced, while at 350°C crystalline, filamentous carbon is formed.

  12. Secondary Waste Form Down-Selection Data Package—Fluidized Bed Steam Reforming Waste Form

    SciTech Connect (OSTI)

    Qafoku, Nikolla; Westsik, Joseph H.; Strachan, Denis M.; Valenta, Michelle M.; Pires, Richard P.

    2011-09-12

    The Hanford Site in southeast Washington State has 56 million gallons of radioactive and chemically hazardous wastes stored in 177 underground tanks (ORP 2010). The U.S. Department of Energy (DOE), Office of River Protection (ORP), through its contractors, is constructing the Hanford Tank Waste Treatment and Immobilization Plant (WTP) to convert the radioactive and hazardous wastes into stable glass waste forms for disposal. Within the WTP, the pretreatment facility will receive the retrieved waste from the tank farms and separate it into two treated process streams. These waste streams will be vitrified, and the resulting waste canisters will be sent to offsite (high-level waste [HLW]) and onsite (immobilized low-activity waste [ILAW]) repositories. As part of the pretreatment and ILAW processing, liquid secondary wastes will be generated that will be transferred to the Effluent Treatment Facility (ETF) on the Hanford Site for further treatment. These liquid secondary wastes will be converted to stable solid waste forms that will be disposed of in the Integrated Disposal Facility (IDF). To support the selection of a waste form for the liquid secondary wastes from WTP, Washington River Protection Solutions (WRPS) has initiated secondary waste form testing work at Pacific Northwest National Laboratory (PNNL). In anticipation of a down-selection process for a waste form for the Solidification Treatment Unit to be added to the ETF, PNNL is developing data packages to support that down-selection. The objective of the data packages is to identify, evaluate, and summarize the existing information on the four waste forms being considered for stabilizing and solidifying the liquid secondary wastes. At the Hanford Site, the FBSR process is being evaluated as a supplemental technology for treating and immobilizing Hanford LAW radioactive tank waste and for treating secondary wastes from the WTP pretreatment and LAW vitrification processes.

  13. Tokyo Tech International Symposium on Education Reform Best Practices for Realization of WorldClass Science and Engineering Higher Education Systems

    E-Print Network [OSTI]

    : Necessity for Education Reform 3. New Education System 4. Expected Results after the Reforms #12;Tokyo Tech of Tokyo Tech: Necessity for Education Reform 3. New Education System 4. Expected Results afterTokyo Tech International Symposium on Education Reform Best Practices for Realization of World

  14. Wide-ranging research programs address issues of local, state and national concern, from immigration reform and Medicaid expansion to national parks management, regional transportation issues,

    E-Print Network [OSTI]

    Barrash, Warren

    immigration reform and Medicaid expansion to national parks management, regional transportation issues

  15. Five Kilowatt Solid Oxide Fuel Cell/Diesel Reformer

    SciTech Connect (OSTI)

    Dennis Witmer; Thomas Johnson

    2008-12-31

    Reducing fossil fuel consumption both for energy security and for reduction in global greenhouse emissions has been a major goal of energy research in the US for many years. Fuel cells have been proposed as a technology that can address both these issues--as devices that convert the energy of a fuel directly into electrical energy, they offer low emissions and high efficiencies. These advantages are of particular interest to remote power users, where grid connected power is unavailable, and most electrical power comes from diesel electric generators. Diesel fuel is the fuel of choice because it can be easily transported and stored in quantities large enough to supply energy for small communities for extended periods of time. This projected aimed to demonstrate the operation of a solid oxide fuel cell on diesel fuel, and to measure the resulting efficiency. Results from this project have been somewhat encouraging, with a laboratory breadboard integration of a small scale diesel reformer and a Solid Oxide Fuel Cell demonstrated in the first 18 months of the project. This initial demonstration was conducted at INEEL in the spring of 2005 using a small scale diesel reformer provided by SOFCo and a fuel cell provided by Acumentrics. However, attempts to integrate and automate the available technology have not proved successful as yet. This is due both to the lack of movement on the fuel processing side as well as the rather poor stack lifetimes exhibited by the fuel cells. Commercial product is still unavailable, and precommercial devices are both extremely expensive and require extensive field support.

  16. HYDROGEN GENERATION FROM PLASMATRON REFORMERS: A PROMISING TECHNOLOGY FOR NOX ADSORBER REGENERATION AND OTHER AUTOMOTIVE APPLICATIONS

    SciTech Connect (OSTI)

    Bromberg, L.; Crane, S; Rabinovich, A.; Kong, Y; Cohn, D; Heywood, J; Alexeev, N.; Samokhin, A.

    2003-08-24

    Plasmatron reformers are being developed at MIT and ArvinMeritor [1]. In these reformers a special low power electrical discharge is used to promote partial oxidation conversion of hydrocarbon fuels into hydrogen and CO. The partial oxidation reaction of this very fuel rich mixture is difficult to initiate. The plasmatron provides continuous enhanced volume initiation. To minimize electrode erosion and electrical power requirements, a low current, high voltage discharge with wide area electrodes is used. The reformers operate at or slightly above atmospheric pressure. Plasmatron reformers provide the advantages of rapid startup and transient response; efficient conversion of the fuel to hydrogen rich gas; compact size; relaxation or elimination of reformer catalyst requirements; and capability to process difficult to reform fuels, such as diesel and bio-oils. These advantages facilitate use of onboard hydrogen-generation technology for diesel exhaust after-treatment. Plasma-enhanced reformer technology can provide substantial conversion even without the use of a catalyst. Recent progress includes a substantial decrease in electrical power consumption (to about 200 W), increased flow rate (above 1 g/s of diesel fuel corresponding to approximately 40 kW of chemical energy), soot suppression and improvements in other operational features.. Plasmatron reformer technology has been evaluated for regeneration of NOx adsorber after-treatment systems. At ArvinMeritor tests were performed on a dual-leg NOx adsorber system using a Cummins 8.3L diesel engine both in a test cell and on a vehicle. A NOx adsorber system was tested using the plasmatron reformer as a regenerator and without the reformer i.e., with straight diesel fuel based regeneration as the baseline case. The plasmatron reformer was shown to improve NOx regeneration significantly compared to the baseline diesel case. The net result of these initial tests was a significant decrease in fuel penalty, roughly 50% at moderate adsorber temperatures. This fuel penalty improvement is accompanied by a dramatic drop in slipped hydrocarbon emissions, which decreased by 90% or more. Significant advantages are demonstrated across a wide range of engine conditions and temperatures. The study also indicated the potential to regenerate NOx adsorbers at low temperatures where diesel fuel based regeneration is not effective, such as those typical of idle conditions. Two vehicles, a bus and a light duty truck, have been equipped for plasmatron reformer NOx adsorber regeneration tests.

  17. A review of "John Donne: The Reforming Soul" by John Stubbs 

    E-Print Network [OSTI]

    McDowell, Sean

    2008-01-01

    Donne: The Reformed Soul. New York: W. W. Norton, 2007. 576 pp. $35.00. Review by SEAN MCDOWELL, SEATTLE UNIVERSITY. In John Donne scholarship, the nonfiction book one is most likely to find not just in libraries but also in chain bookstores across... the English-speaking world is John Donne: The Reformed Soul, the new full-length biography of Donne?s life by English scholar John Stubbs. Published first in the U. K. in 2006 and subsequently by W. W. Norton in 2007, John Donne: The Reformed Soul...

  18. Modeling of On-Cell Reforming Reaction for Planar SOFC Stacks

    SciTech Connect (OSTI)

    Yang, Choongmo; Lim, Hyung-Tae; Hwang, Soon Cheol; Kim, Dohyung; Lai, Canhai; Koeppel, Brian J.; Recknagle, Kurtis P.; Khaleel, Mohammad A.

    2011-05-30

    Planar Solid Oxide Fuel Cell (SOFC) stack is known to suffer thermal problem from high stack temperature during operation to generate high current. On-Cell Reforming (OCR) phenomenon is often used to reduce stack temperature by an endothermic reaction of steam-methane reforming process. RIST conducted single-cell experiment to validate modeling tool to simulate OCR performance including temperature measurement. 2D modeling is used to check reforming rate during OCR using temperature measurement data, and 3D modeling is used to check overall thermal performance including furnace boundary conditions.

  19. Deregulating and regulatory reform in the U.S. electric power sector

    E-Print Network [OSTI]

    Joskow, Paul L.

    2000-01-01

    This paper discusses the evolution of wholesale and retail competition in the U.S electricity sector and associated industry restructuring and regulatory reforms. It begins with a discussion of the industry structure and ...

  20. The risk of reform : privatisation and liberalisation in the Brazilian electric power industry

    E-Print Network [OSTI]

    Tankha, Sunil, Ph. D. Massachusetts Institute of Technology

    2006-01-01

    In 1996, when Brazil was well-underway to privatising and liberalising its electric power industry, few would have predicted that within five years the reforms would be a shambles. Like its neighbors Argentina and Chile, ...

  1. Computational heterogeneous catalysis applied to steam methane reforming over nickel and nickel/silver catalysts

    E-Print Network [OSTI]

    Blaylock, Donnie Wayne

    2011-01-01

    The steam methane reforming (SMR) reaction is the primary industrial means for producing hydrogen gas. As such, it is a critical support process for applications including petrochemical processing and ammonia synthesis. ...

  2. OXIDATION OF FUELS IN THE COOL FLAME REGIME FOR COMBUSTION AND REFORMING FOR FUEL CELLS.

    SciTech Connect (OSTI)

    NAIDJA,A.; KRISHNA,C.R.; BUTCHER,T.; MAHAJAN,D.

    2002-08-01

    THE REVIEW INTEGRATES RECENT INVESTIGATIONS ON AUTO OXIDATION OF FUEL OILS AND THEIR REFORMING INTO HYDROGEN RICH GAS THAT COULD SERVE AS A FEED FOR FUEL CELLS AND COMBUSTION SYSTEMS.

  3. National Welfare State Reforms and the Question of Europeanization: From Impact to Usages 

    E-Print Network [OSTI]

    Jacquot, Sophie

    2008-01-01

    This paper reviews the literature concerned with the interaction between the European Union and national welfare state reforms. Its interest lies in the studies that have been proposed of the interplay between the European ...

  4. Development of Ni-based Sulfur Resistant Catalyst for Diesel Reforming

    SciTech Connect (OSTI)

    Gunther Dieckmann

    2006-06-30

    In order for diesel fuel to be used in a solid oxide fuel cell auxiliary power unit, the diesel fuel must be reformed into hydrogen, carbon monoxide and carbon dioxide. One of the major problems facing catalytic reforming is that the level of sulfur found in low sulfur diesel can poison most catalysts. This report shows that a proprietary low cost Ni-based reforming catalyst can be used to reform a 7 and 50 ppm sulfur containing diesel fuel for over 500 hours of operation. Coking, which appears to be route of catalyst deactivation due to metal stripping, can be controlled by catalyst modifications, introduction of turbulence, and/or by application of an electromagnetic field with a frequency from {approx}50 kHz to 13.56 MHz with field strength greater than about 100 V/cm and more preferably greater about 500 V/cm.

  5. Rent Reform Initiatives In Public Housing and Section 8 Voucher Programs

    E-Print Network [OSTI]

    Rosenthal, Larry A.

    2007-01-01

    is a factor with HUD’s Section 8 Management AssessmentHousing and Section 8 Voucher Programs force HUD to identifyHUD rental Rent Reform Initiatives in Public Housing and Section 8

  6. Building the Reformed Kirk: the cultural use of ecclesiastical buildings in Scotland, 1560–1645 

    E-Print Network [OSTI]

    Chernoff, Graham Thomas

    2013-07-05

    This thesis examines the built environment and culture of Scotland between 1560 and 1645 by analysing church buildings erected during the period. The mid-sixteenth century ecclesiastical Reformation and mid-seventeenth-century ...

  7. Earnings Determination and Taxes: Evidence from a Cohort-Based Payroll Tax Reform in Greece

    E-Print Network [OSTI]

    Saez, Emmanuel; Matsaganis, Manos; Tsakloglou, Panos

    2010-01-01

    pension outcomes i n Greece." British Jour¬ nal ofIndustrialL T A X R E F O R M IN GREECE Emmanuel Saez Manos MatsaganisBased Payroll Tax Reform in Greece Emmanuel Saez, Manos

  8. Bio-Derived Liquids to Hydrogen Distributed Reforming Working Group Background Paper

    Broader source: Energy.gov [DOE]

    Paper by Arlene Anderson and Tracy Carole presented at the Bio-Derived Liquids to Hydrogen Distributed Reforming Working Group, with a focus on key drivers, purpose, and scope.

  9. A light in the dark : labor reform in Guatemala during the FRG administration, 2000-2004

    E-Print Network [OSTI]

    Fuentes, Alberto (Alberto Jose)

    2007-01-01

    Recent literature on Latin America has highlighted cases of reform by the region's governments to increase State regulation of the labor market, offset the detrimental effects of the so-called Washington Consensus, and ...

  10. Effects of operating conditions, compression ratio, and gasoline reformate on SI engine knock limits

    E-Print Network [OSTI]

    Gerty, Michael D

    2005-01-01

    A set of experiments was performed to investigate the effects of air-fuel ratio, inlet boost pressure, hydrogen rich fuel reformate, and compression ratio on engine knock behavior. For each condition the effect of spark ...

  11. Fuel cell generator with fuel electrodes that control on-cell fuel reformation

    DOE Patents [OSTI]

    Ruka, Roswell J. (Pittsburgh, PA); Basel, Richard A. (Pittsburgh, PA); Zhang, Gong (Murrysville, PA)

    2011-10-25

    A fuel cell for a fuel cell generator including a housing including a gas flow path for receiving a fuel from a fuel source and directing the fuel across the fuel cell. The fuel cell includes an elongate member including opposing first and second ends and defining an interior cathode portion and an exterior anode portion. The interior cathode portion includes an electrode in contact with an oxidant flow path. The exterior anode portion includes an electrode in contact with the fuel in the gas flow path. The anode portion includes a catalyst material for effecting fuel reformation along the fuel cell between the opposing ends. A fuel reformation control layer is applied over the catalyst material for reducing a rate of fuel reformation on the fuel cell. The control layer effects a variable reformation rate along the length of the fuel cell.

  12. Essays on electricity market reforms: a cross-country applied approach

    E-Print Network [OSTI]

    Erdogdu, Erkan

    2013-06-11

    or national monopolies but they have been put under regulation by an independent regulator. Other common elements of the reforms include the introduction of wholesale and spot power markets, the establishment of impartial market and system operators...

  13. The wholesale market for electricity in England and Wales : recent developments and future reforms

    E-Print Network [OSTI]

    Sweeting, Andrew

    2000-01-01

    The England and Wales wholesale electricity market is about to undergo major reform (NETA). I describe and analyse the proposed arrangements, contrasting them with those currently in operation. I argue that while NETA will ...

  14. Heat Transfer Limitations in Hydrogen Production Via Steam Reformation: The Effect of Reactor Geometry

    E-Print Network [OSTI]

    Vernon, David R.; Davieau, David D.; Dudgeon, Bryce A.; Erickson, Paul A.

    2006-01-01

    for on- board hydrogen production for fuel-cell poweredSteam-Reforming Hydrogen production Reactors, M.S. Thesis,at the UC Davis Hydrogen Production and Utilization

  15. How Planning Works in an Age of Reform: Land, Sustainability, and Housing Development Traditions in Zanzibar

    E-Print Network [OSTI]

    Muhajir, Makame Ali Haji

    2011-04-26

    , the land and environmental management projects were unable to sustain their adopted sustainability agenda that was based on democratic, collaborative, and participatory principles. The government finds it difficult to simultaneously cope with the reform...

  16. Development of a comprehensive reporting system for a school reform organization: The Accelerated Schools Project 

    E-Print Network [OSTI]

    Stephens, Jennifer Anne

    2006-04-12

    Given the conflicting research results on the effectiveness of whole-school reform models (Nunnery, 1998; Stringfield & Herman, 1997; American Institutes for Research, 1999; U.S. Department of Education, 2004), there is a need to focus...

  17. Voter Opinions about Election Reform: Do They Support Making Voting More Convenient?

    E-Print Network [OSTI]

    Alvarez, R. Michael

    2010-07-14

    We study public opinions about convenience voting reforms, using a unique state-by-state survey conducted in the 2008 presidential election. Our analysis of the American voting public’s support for potential convenience ...

  18. 19th Century Ballot Reform in California: A Study of the Huntington Library's Political Ephemera Collection

    E-Print Network [OSTI]

    Goodrich, Melanie

    2008-11-30

    Ballot reform is an important part of the American political process. During the 1800’s, ballots changed drastically. At the beginning of the century, voters wrote the names of the candidates for whom they wished to vote ...

  19. Admonition and the academy : installation, video, and performance art in Reform Era China

    E-Print Network [OSTI]

    Oen, Karin Grace

    2012-01-01

    China's Reform Era (1978-present) has seen the reinvigoration of academic, and artistic practice, and a rapprochement between the Chinese Communist Party and the intellectual elite. At its beginnings in the early- to ...

  20. Organizational sense making : responsibilities to the MCAS reform in the Massachusetts public schools

    E-Print Network [OSTI]

    Goldman, Janice J., 1953-

    2005-01-01

    Educational reform has become a central concern of public policy debates at both the state and federal level. The policy trend both nationally and locally is towards uniform standards in education, with testing as the ...

  1. Design and Operation of the Synthesis Gas Generator System for Reformed Propane and Glycerin Combustion

    E-Print Network [OSTI]

    Pickett, Derek

    2013-12-31

    Element LHV Lower Heating Value N2 Nitrogen NI National Instruments NOx Nitrogen Oxides O2 Oxygen PP Pure Propane REG Renewable Energy Group RFS Renewable Fuel Standards RG Reformed Glycerin RP Reformed Propane RPM Revolutions Per Minute SM... ignition (CI) engines in sufficient quantities that meets the Renewable Fuel Standards (RFS) set by the Environmental Protection Agency (EPA) [4]. Upcoming mandates surrounding biofuels (including bio- based ethanol) in the United States requires a...

  2. Steam Reforming on Transition-metal Carbides from Density-functional Theory

    SciTech Connect (OSTI)

    Vojvodic, Aleksandra

    2012-05-11

    A screening study of the steam reforming reaction on clean and oxygen covered early transition-metal carbides surfaces is performed by means of density-functional theory calculations. It is found that carbides provide a wide spectrum of reactivities, from too reactive via suitable to too inert. Several molybdenum-based systems are identified as possible steam reforming catalysts. The findings suggest that carbides provide a playground for reactivity tuning, comparable to the one for pure metals.

  3. Methods of reforming hydrocarbon fuels using hexaaluminate catalysts

    DOE Patents [OSTI]

    Gardner, Todd H. (Morgantown, WV); Berry, David A. (Morgantown, WV); Shekhawat, Dushyant (Morgantown, WV)

    2012-03-27

    A metal substituted hexaaluminate catalyst for reforming hydrocarbon fuels to synthesis gas of the general formula AB.sub.yAl.sub.12-yO.sub.19-.delta., A being selected from alkali metals, alkaline earth metals and lanthanide metals or mixtures thereof. A dopant or surface modifier selected from a transitions metal, a spinel of an oxygen-ion conductor is incorporated. The dopant may be Ca, Cs, K, La, Sr, Ba, Li, Mg, Ce, Co, Fe, Ir, Rh, Ni, Ru, Cu, Pe, Os, Pd, Cr, Mn, W, Re, Sn, Gd, V, Ti, Ag, Au, and mixtures thereof. The oxygen-ion conductor may be a perovskite selected from M'RhO.sub.3, M'PtO.sub.3, M'PdO.sub.3, M'IrO.sub.3, M'RuO.sub.3 wherein M'=Mg, Sr, Ba, La, Ca; a spinel selected from MRh.sub.2O.sub.4, MPt.sub.2O.sub.4, MPd.sub.2O.sub.4, MIr.sub.2O.sub.4, MRu.sub.2O.sub.4 wherein M=Mg, Sr, Ba, La, Ca and mixtures thereof; a florite is selected from M''O.sub.2.

  4. Modeling the Effects of Steam-Fuel Reforming Products on Low Temperature Combustion of n-Heptane

    Broader source: Energy.gov [DOE]

    The effects of blends of base fuel (n-heptane) and fuel-reformed products on the low-temperature combustion process were investigated.

  5. Hydrogen production from the steam reforming of Dinethyl Ether and Methanol

    SciTech Connect (OSTI)

    Semelsberger, T. A.; Borup, R. L.

    2004-01-01

    This study investigates dimethyl ether (DME) steam reforming for the generation of hydrogen rich fuel cell feeds for fuel cell applications. Methanol has long been considered as a fuel for the generation of hydrogen rich fuel cell feeds due to its high energy density, low reforming temperature, and zero impurity content. However, it has not been accepted as the fuel of choice due its current limited availability, toxicity and corrosiveness. While methanol steam reforming for the generation of hydrogen rich fuel cell feeds has been extensively studied, the steam reforming of DME, CH{sub 3}OCH{sub 3} + 3H{sub 2}O = 2CO{sub 2} + 6H{sub 2}, has had limited research effort. DME is the simplest ether (CH{sub 3}OCH{sub 3}) and is a gas at ambient conditions. DME has physical properties similar to those of LPG fuels (i.e. propane and butane), resulting in similar storage and handling considerations. DME is currently used as an aerosol propellant and has been considercd as a diesel substitute due to the reduced NOx, SOx and particulate emissions. DME is also being considered as a substitute for LPG fuels, which is used extensively in Asia as a fuel for heating and cooking, and naptha, which is used for power generation. The potential advantages of both methanol and DME include low reforming temperature, decreased fuel proccssor startup energy, environmentally benign, visible flame, high heating value, and ease of storage and transportation. In addition, DME has the added advantages of low toxicity and being non-corrosive. Consequently, DME may be an ideal candidate for the generation of hydrogen rich fuel cell feeds for both automotive and portable power applications. The steam reforming of DME has been demonstrated to occur through a pair of reactions in series, where the first reaction is DME hydration followed by MeOH steam reforming to produce a hydrogen rich stream.

  6. An Innovative Injection and Mixing System for Diesel Fuel Reforming

    SciTech Connect (OSTI)

    Spencer Pack

    2007-12-31

    This project focused on fuel stream preparation improvements prior to injection into a solid oxide fuel cell reformer. Each milestone and the results from each milestone are discussed in detail in this report. The first two milestones were the creation of a coking formation test rig and various testing performed on this rig. Initial tests indicated that three anti-carbon coatings showed improvement over an uncoated (bare metal) baseline. However, in follow-up 70 hour tests of the down selected coatings, Scanning Electron Microscope (SEM) analysis revealed that no carbon was generated on the test specimens. These follow-up tests were intended to enable a down selection to a single best anti-carbon coating. Without the formation of carbon it was impossible to draw conclusions as to which anti-carbon coating showed the best performance. The final 70 hour tests did show that AMCX AMC26 demonstrated the lowest discoloration of the metal out of the three down selected anti-carbon coatings. This discoloration did not relate to carbon but could be a useful result when carbon growth rate is not the only concern. Unplanned variations in the series of tests must be considered and may have altered the results. Reliable conclusions could only be drawn from consistent, repeatable testing beyond the allotted time and funding for this project. Milestones 3 and 4 focused on the creation of a preheating pressure atomizer and mixing chamber. A design of experiment test helped identify a configuration of the preheating injector, Build 1, which showed a very uniform fuel spray flow field. This injector was improved upon by the creation of a Build 2 injector. Build 2 of the preheating injector demonstrated promising SMD results with only 22psi fuel pressure and 0.7 in H2O of Air. It was apparent from testing and CFD that this Build 2 has flow field recirculation zones. These recirculation zones may suggest that this Build 2 atomizer and mixer would require steam injection to reduce the auto ignition potential. It is also important to note that to achieve uniform mixing within a short distance, some recirculation is necessary. Milestone 5 generated CFD and FEA results that could be used to optimize the preheating injector. CFD results confirmed the recirculation zones seen in test data and confirmed that the flow field would not change when attached to a reformer. The FEA predicted fuel wetted wall temperatures which led to several suggested improvements that could possibly improve nozzle efficiency. Milestone 6 (originally an optional task) took a different approach than the preheating pressure atomizer. It focused on creation and optimization of a piezoelectric injector which could perform at extremely low fuel pressures. The piezoelectric atomizer showed acceptable SMD results with fuel pressure less than 1.0 psig and air pressure less than 1.0 in H2O. These SMD values were enhanced when a few components were changed, and it is expected would improve further still at elevated air temperatures. It was demonstrated that the piezoelectric injector could accomplish the desired task. The addition of phase tracking and a burst mode to the frequency controller increased the usability of the piezoelectric injector. This injector is ready to move on to the next phase of development. Engine Components has met the required program milestones of this project. Some of the Milestones were adjusted to allow Milestone 6 to be completed in parallel with the other Milestones. Because of this, Task 3.10 and 3.13 were made optional instead of Milestone 6. Engine Components was extremely grateful for the support that was provided by NETL in support of this work.

  7. Experimental and computational investigations of sulfur-resistant bimetallic catalysts for reforming of biomass gasification products

    SciTech Connect (OSTI)

    Rangan, Meghana; Yung, Matthew M.; Medlin, J. William (NREL); (Colorado)

    2011-11-17

    A combination of density functional theory (DFT) calculations and experimental studies of supported catalysts was used to identify H{sub 2}S-resistant biomass gasification product reforming catalysts. DFT calculations were used to search for bimetallic, nickel-based (1 1 1) surfaces with lower sulfur adsorption energies and enhanced ethylene adsorption energies. These metrics were used as predictors for H{sub 2}S resistance and activity toward steam reforming of ethylene, respectively. Relative to Ni, DFT studies found that the Ni/Sn surface alloy exhibited enhanced sulfur resistance and the Ni/Ru system exhibited an improved ethylene binding energy with a small increase in sulfur binding energy. A series of supported bimetallic nickel catalysts was prepared and screened under model ethylene reforming conditions and simulated biomass tar reforming conditions. The observed experimental trends in activity were consistent with theoretical predictions, with observed reforming activities in the order Ni/Ru > Ni > Ni/Sn. Interestingly, Ni/Ru showed a high level of resistance to sulfur poisoning compared with Ni. This sulfur resistance can be partly explained by trends in sulfur versus ethylene binding energy at different types of sites across the bimetallic surface.

  8. New Insights into Reaction Mechanisms of Ethanol Steam Reforming on Co-ZrO2

    SciTech Connect (OSTI)

    Sun, Junming; Karim, Ayman M.; Mei, Donghai; Engelhard, Mark H.; Bao, Xinhe; Wang, Yong

    2015-01-01

    The reaction pathway of ethanol steam reforming on Co-ZrO2 has been identified and the active sites associated with each step are proposed. Ethanol is converted to acetaldehyde and then to acetone, followed by acetone steam reforming. More than 90% carbon was found to follow this reaction pathway. N2-Sorption, X-ray Diffraction (XRD), Temperature Programmed Reduction (TPR), in situ X-ray Photoelectron Spectroscopy (XPS), Transmission Electron Microscopy, as well as theoretical Density Functional Theory (DFT) calculations have been employed to identify the structure and functionality of the catalysts, which was further used to correlate their performance in ESR. It was found that metallic cobalt is mainly responsible for the acetone steam reforming reactions; while, CoO and basic sites on the support play a key role in converting ethanol to acetone via dehydrogenation and condensation/ketonization reaction pathways. The current work provides fundamental understanding of the ethanol steam reforming reaction mechanisms on Co-ZrO2 catalysts and sheds light on the rational design of selective and durable ethanol steam reforming catalysts.

  9. Steam Reforming Technology for Denitration and Immobilization of DOE Tank Wastes

    SciTech Connect (OSTI)

    Mason, J. B.; McKibbin, J.; Ryan, K.; Schmoker, D.

    2003-02-26

    THOR Treatment Technologies, LLC (THOR) is a joint venture formed in June 2002 by Studsvik, Inc. (Studsvik) and Westinghouse Government Environmental Services Company LLC to further develop, market, and deploy Studsvik's patented THORSM non-incineration, steam reforming waste treatment technology. This paper provides an overview of the THORSM steam reforming process as applied to the denitration and conversion of Department of Energy (DOE) tank wastes to an immobilized mineral form. Using the THORSM steam reforming technology to treat nitrate containing tank wastes could significantly benefit the DOE by reducing capital and life-cycle costs, reducing processing and programmatic risks, and positioning the DOE to meet or exceed its stakeholder commitments for tank closure. Specifically, use of the THORSM technology can facilitate processing of up to 75% of tank wastes without the use of vitrification, yielding substantial life-cycle cost savings.

  10. Process and apparatus for the production of hydrogen by steam reforming of hydrocarbon

    DOE Patents [OSTI]

    Sircar, Shivaji (Wescosville, PA); Hufton, Jeffrey Raymond (Fogelsville, PA); Nataraj, Shankar (Allentown, PA)

    2000-01-01

    In the steam reforming of hydrocarbon, particularly methane, under elevated temperature and pressure to produce hydrogen, a feed of steam and hydrocarbon is fed into a first reaction volume containing essentially only reforming catalyst to partially reform the feed. The balance of the feed and the reaction products of carbon dioxide and hydrogen are then fed into a second reaction volume containing a mixture of catalyst and adsorbent which removes the carbon dioxide from the reaction zone as it is formed. The process is conducted in a cycle which includes these reactions followed by countercurrent depressurization and purge of the adsorbent to regenerate it and repressurization of the reaction volumes preparatory to repeating the reaction-sorption phase of the cycle.

  11. Method for forming synthesis gas using a plasma-catalyzed fuel reformer

    DOE Patents [OSTI]

    Hartvigsen, Joseph J; Elangovan, S; Czernichowski, Piotr; Hollist, Michele

    2015-04-28

    A method of forming a synthesis gas utilizing a reformer is disclosed. The method utilizes a reformer that includes a plasma zone to receive a pre-heated mixture of reactants and ionize the reactants by applying an electrical potential thereto. A first thermally conductive surface surrounds the plasma zone and is configured to transfer heat from an external heat source into the plasma zone. The reformer further includes a reaction zone to chemically transform the ionized reactants into synthesis gas comprising hydrogen and carbon monoxide. A second thermally conductive surface surrounds the reaction zone and is configured to transfer heat from the external heat source into the reaction zone. The first thermally conductive surface and second thermally conductive surface are both directly exposed to the external heat source. A corresponding apparatus and system are also disclosed herein.

  12. Theoretical study of Diesel fuel reforming by a non-thermal arc discharge A. Lebouvier1,2

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Theoretical study of Diesel fuel reforming by a non-thermal arc discharge A. Lebouvier1,2 , G anti-pollution norm namely for Diesel powered vehicles. NOx (NO, NO2,...) are very irritant pollutants- nologies purge is the use of non-thermal plasma. Plasma reforming of diesel fuel and exhaust gas mix- ture

  13. Isotopic and kinetic assessment of the mechanism of methane reforming and decomposition reactions on supported iridium catalysts

    E-Print Network [OSTI]

    Iglesia, Enrique

    Isotopic and kinetic assessment of the mechanism of methane reforming and decomposition reactions reforming reactions. 1. Introduction Methane is an essential raw material in the synthesis of liquid fuels and petrochemical, but its strong C­H bonds (439 kJ molÀ1 1 ) require active catalysts and severe reaction

  14. Bio-Derived Liquids to Hydrogen Distributed Reforming Working Group (BILIWG) Kick-Off Meeting Proceedings Hilton Garden Inn-BWI,Baltimore, MD October 24, 2006

    Broader source: Energy.gov [DOE]

    Proceedings from the October 24, 2006 Bio-Derived Liquids to Hydrogen Distributed Reforming Working Group Kick-Off Meeting.

  15. Can CO-tolerant Anodes be Economically Viable for PEMFC Applications with Reformates?

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    He, P.; Zhang, Y.; Ye., S.; Wang, J. X.

    2014-10-05

    Several years ago, the answer to this question was negative based on the criteria for an anode with more »ability to simultaneously enhance activity and stability by using single crystalline Ru@Pt core-shell nanocatalysts. Here, we report that the performance target with reformates was met using bilayer-thick Ru@Pt core-shell nanocatalysts with 0.047 mg cm-2 Pt and 0.024 mg cm-2 Ru loading, supporting a positive prognosis for the economically viable use of reformates in PEMFC applications.« less

  16. Feasibility Analysis of Steam Reforming of Biodiesel by-product Glycerol to Make Hydrogen 

    E-Print Network [OSTI]

    Joshi, Manoj

    2009-06-09

    ) reaction where it reacts with excess steam in presence of catalyst to form hydrogen and carbon dioxide. In general, 8 Co/MgO, Co/Al2O3, Ni/MgO is used as catalyst for steam reforming because they are cheaper and easily available. During... hydrogen. This process consists of 850oC reformer, 350oC and 210oC shift reactors for water gas shift reaction, flash tanks, and a separator. It is considered to be the least expensive method. iv At 850oC and 1 atm pressure, glycerol reacts...

  17. U.S. Policy and the Future of Uzbekistan: Promoting Reform, Security, and Regional Stability 

    E-Print Network [OSTI]

    2007-01-01

    be added Interagency Dynamics CENTCOM VTC Uzbekistan Move 1 SITUATION MEANS 1 MIXED RESULTS President Karimov is gone. Uzbek Search and Rescue options. Appoint an interim President who will stand for election in 90 days. Appoint a known reformer who... branch. Appoint a police personality to control people and elites. Col Gen Inoyatov fit the bill. Appoint a “front man” subservient to police power. LESSONS FOR U.S.: Be prepared to ride out a tense period. Uzbeks want economic reform in the long...

  18. Reforming of Diesel Fuel for Transportation Applications J. P. Kopasz, S. Lottes, D-J. Liu, R. Ahluwalia, V. Novick and S. Ahmed

    E-Print Network [OSTI]

    , steam and water prior to catalyst bed 3-fluid nozzle delivers a fine mist of fuel #12;ReformingReforming of Diesel Fuel for Transportation Applications J. P. Kopasz, S. Lottes, D-J. Liu, R. Ahluwalia, V. Novick and S. Ahmed Argonne National Laboratory Applications of diesel fuel reforming

  19. First-Principles Study on the Origin of the Different Selectivities for Methanol Steam Reforming on Cu(111) and Pd(111)

    E-Print Network [OSTI]

    Li, Weixue

    different catalytic processes, including methanol decomposition (eq 1), methanol steam reforming (eq 2First-Principles Study on the Origin of the Different Selectivities for Methanol Steam Reforming steam reforming (MSR) is an important industrial process for hydrogen production, and fundamental

  20. For nearly a year, the national election reform debate has become dominated by a single issue: can voters trust that their ballots will be

    E-Print Network [OSTI]

    Rivest, Ronald L.

    Briefing For nearly a year, the national election reform debate has become dominated by a single is secure. Consequently, in this seventh edition of our Election Reform Briefing series, electionline.org examines voting security, the most controversial aspect of election reform since the passage of the Help

  1. Colorectal cancer and socioeconomic status in Miami-Dade County: Neighborhood-level associations before and after the Welfare Reform Act

    E-Print Network [OSTI]

    Roy Chowdhury, Rinku

    before and after the Welfare Reform Act M.N. Hernandez a,*, R. Roy Chowdhury b , LE. Fleming c , DA, evaluating them in relation to neighborhood characteristics and the 1996 Welfare Reform Act. Late-stage CRC distinct time periods corresponding to before and after the 1996 Welfare Reform Act. CRC incidence

  2. High Efficiency Solar-based Catalytic Structure for CO{sub 2} Reforming

    SciTech Connect (OSTI)

    Menkara, Hisham

    2013-09-30

    Throughout this project, we developed and optimized various photocatalyst structures for CO{sub 2} reforming into hydrocarbon fuels and various commodity chemical products. We also built several closed-loop and continuous fixed-bed photocatalytic reactor system prototypes for a larger-scale demonstration of CO{sub 2} reforming into hydrocarbons, mainly methane and formic acid. The results achieved have indicated that with each type of reactor and structure, high reforming yields can be obtained by refining the structural and operational conditions of the reactor, as well as by using various sacrificial agents (hole scavengers). We have also demonstrated, for the first time, that an aqueous solution containing acid whey (a common bio waste) is a highly effective hole scavenger for a solar-based photocatalytic reactor system and can help reform CO{sub 2} into several products at once. The optimization tasks performed throughout the project have resulted in efficiency increase in our conventional reactors from an initial 0.02% to about 0.25%, which is 10X higher than our original project goal. When acid whey was used as a sacrificial agent, the achieved energy efficiency for formic acid alone was ~0.4%, which is 16X that of our original project goal and higher than anything ever reported for a solar-based photocatalytic reactor. Therefore, by carefully selecting sacrificial agents, it should be possible to reach energy efficiency in the range of the photosynthetic efficiency of typical crop and biofuel plants (1-3%).

  3. SOLAR UPGRADE OF METHANE USING DRY REFORMING IN DIRECT CONTACT BUBBLE REACTOR

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    SOLAR UPGRADE OF METHANE USING DRY REFORMING IN DIRECT CONTACT BUBBLE REACTOR Khalid Al-Ali 1 , Kodama S. 1 , Kaneko H. 1 , Sekiguchi H. 1 , Tamaura Y. 1 and Chiesa M. 2 1 Department of Chemical, in an alkali carbonate based molten salt system containing suspended Ni-Al2O3 catalyst. A thermodynamical

  4. Performance of Sulfur Tolerant Reforming Catalysts for Production of Hydrogen from Jet Fuel Simulants

    E-Print Network [OSTI]

    Azad, Abdul-Majeed

    Performance of Sulfur Tolerant Reforming Catalysts for Production of Hydrogen from Jet Fuel is a critical path for the use of jet fuels in powering the commercial growth of fuel cell systems for air the fuel through adsorptive methods is not practical for long term operations. The current work describes

  5. Combined Steam Reforming and Partial Oxidation of Methane to Synthesis Gas under Electrical Discharge

    E-Print Network [OSTI]

    Mallinson, Richard

    and carbon monoxide, is an important raw material in chemical manufacture such as, Fischer-Tropsch synthesis and Materials Science, University of Oklahoma, Norman, Oklahoma 73019 An experimental study of synthesis gas production has been steam reforming, shown in reaction 4. It is very useful to use low-cost materials

  6. THE CALIFORNIAN MODEL AS THE PARADIGM FOR SECOND GENERATION REFORMS IN LATINAMERIC

    E-Print Network [OSTI]

    Catholic University of Chile (Universidad Católica de Chile)

    THE CALIFORNIAN MODEL AS THE PARADIGM FOR SECOND GENERATION REFORMS IN LATINAMERIC Hugh Rudnick, Pontificia Universidad Cat61ica de Chile, Santiago, Chile The electric energy industry in Latin America has countries in 1997. Brazil also joined the group and Venezuela, Mexico and Ecuador have initiated actions

  7. Project Information Form Project Title Program for Vehicle Regulatory Reform: Assessing Life Cycle-Based

    E-Print Network [OSTI]

    California at Davis, University of

    Project Information Form Project Title Program for Vehicle Regulatory Reform: Assessing Life Cycle vehicle production emissions and other life cycle emissions. Non- operation emissions are more dominant the need, effectiveness, and policy strategies for capturing life cycle vehicle emissions in LDV GHG

  8. Pielke -Government Reform Testimony 30 January 2007 Page 1 of 13

    E-Print Network [OSTI]

    Colorado at Boulder, University of

    Pielke - Government Reform Testimony 30 January 2007 Page 1 of 13 STATEMENT TO THE COMMITTEE that good congressional oversight is not easy. But I also know how essential it is to the health Introduction I thank the Chairman and the Committee for the opportunity to offer testimony this morning

  9. Hagiography and Theology for a Comprehensive Reformed Church: John Gauden and the portrayal of Ralph Brownrigg

    E-Print Network [OSTI]

    Hampton, Stephen

    2015-01-01

    affirms the fundamental soundness of the Church of England’s polity, and underlines that many of her bishops have been beyond reproach: he also suggests that the best forum for bringing reform and healing to the Church is the orderly deliberation of a...

  10. Effects of the Bus Regulatory Reform Act of 1982 on the Texas intercity bus industry 

    E-Print Network [OSTI]

    Kuenzer, Karen Elizabeth

    1993-01-01

    . The passage of the Bus Regulatory Reform Act of 1982 was an effort to decrease operating costs and increase ridership by allowing bus companies to discontinue unprofitable routes, have freedom over the setting of fares, and enter into new, competitive markets...

  11. American Institute of Aeronautics and Astronautics Measurements for fuel reforming for scramjet thermal management and

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    American Institute of Aeronautics and Astronautics 1 Measurements for fuel reforming for scramjet. Different cooling strategies have been evaluated by MBDA-France (calculations, material tests). Metallic. The time allocated to mix the injected fuel with inlet air, to ignite the combustion and to complete

  12. Hydrogen Bond Dissociation and Reformation in Methanol Oligomers Following Hydroxyl Stretch Relaxation

    E-Print Network [OSTI]

    Fayer, Michael D.

    Hydrogen Bond Dissociation and Reformation in Methanol Oligomers Following Hydroxyl Stretch, 2002 Vibrational relaxation and hydrogen bond dynamics in methanol-d dissolved in CCl4 have been-d molecules both accepting and donating hydrogen bonds at 2500 cm-1 . Following vibrational relaxation

  13. A New Look at Patent Reform: Comparison to other suggested approaches

    E-Print Network [OSTI]

    Hollaar, Lee A.

    A New Look at Patent Reform: Comparison to other suggested approaches Lee A. Hollaar Professor (The latest version of the paper can be found at http://digital-law-online.info/papers/lah/mini-patent while not substantially helping patents. "Gold-plated patents" In their paper "What to Do about Bad

  14. FLUIDIZED BED STEAM REFORMING FOR TREATMENT AND IMMOBILIZATION OF LOW-ACTIVITY WASTE

    SciTech Connect (OSTI)

    HEWITT WM

    2011-04-08

    This report is one of four reports written to provide background information regarding immobilization technologies remaining under consideration for supplemental immobilization of Hanford's low-activity waste. This paper provides the reader a general understanding of fluidized bed steam reforming and its possible application to treat and immobilize Hanford low-activity waste.

  15. Mixed Ionic/Electronic Conducting Ceramic Membranes for Oxygen-Assisted CO2 Reforming

    E-Print Network [OSTI]

    Slade, David

    2010-03-29

    Incorporating a SrFeCo0.5Ox (SFC) membrane into a CO2 reforming reactor doubles methane conversion with a powder Pt/ZrO2 catalyst. The deactivation of both Pt/ZrO2 and a Pt/CeZrO2 catalyst is also retarded substantially. Catalyst performance...

  16. Anaerobic digestion for methane generation and ammonia reforming for hydrogen production

    E-Print Network [OSTI]

    Anaerobic digestion for methane generation and ammonia reforming for hydrogen production to the methane potential alone indicated that at a C:N ratio of 17, the energy output was greater for the ADBH is converted to carbon dioxide and methane, and organic nitrogen is converted to ammonia. Generally, ammonia

  17. Chinese Trade Reforms, Market Access and Foreign Competition: the Patterns of French Exporters

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Chinese Trade Reforms, Market Access and Foreign Competition: the Patterns of French Exporters on firms' export patterns: (i) ex- pansion of export opportunities for foreign firms exporting exports react to an exogenous variation in Chinese import tariff cuts relative to tariff changes in other

  18. Statistics and Health Care Reform in the United States Jasjeet Singh Sekhon

    E-Print Network [OSTI]

    Sekhon, Jasjeet S.

    Statistics and Health Care Reform in the United States Jasjeet Singh Sekhon 6/14/2010 The signature is one of the most significant pieces of social policy legislation in the history of the United States care system in the United States, and hence it is difficult to evaluate PPACA. The issues of inference

  19. Effect of Reformate Components on PEMFC Performance Dilution and Reverse Water Gas Shift Reaction

    E-Print Network [OSTI]

    Van Zee, John W.

    Effect of Reformate Components on PEMFC Performance Dilution and Reverse Water Gas Shift Reaction on the performance of proton exchange membrane fuel cells PEMFCs with Pt and Pt/Ru alloy anodes. The performance with N2 /H2 mixtures. The same deviations were observed with CO2 /H2 mixtures for a PEMFC with a Pt

  20. Study of Methane Reforming in Warm Non-Equilibrium Plasma Discharges 

    E-Print Network [OSTI]

    Parimi, Sreekar

    2012-02-14

    ........................................................ 24 2.3.2 Plasma Reforming ........................................................................ 26 2.3.3 Effects of Kinetics and Dilution ................................................... 30 2.3.3.1 Hydrogen addition... .................................................................................. 75 6.1 Measurement methods for involving variables .............................................. 75 6.2 Tests with varying proportions of methane and hydrogen ............................ 79 6.2.1 Effect of Hydrogen Dilution...

  1. Working Group Meeting Presentation Guidance at a Glance Distributed Reforming of Biomass Pyrolysis Oils

    E-Print Network [OSTI]

    and Performance Carbon Deposit Removal and Catalyst Regeneration Management Process Energy Integration Integrated and 7 2007 R. J. Evans, NREL D. M. Steward, NREL #12;Innovation / Overview Biomass pyrolysis produces.31 O2 + 0.26 H2O 0.71 CO2 + 0.96 H2 #12;Key Performance Metrics Catalytic Steam Reforming of Bio

  2. The Effect of Reformate on PEM Fuel Cell Performance Mahesh Murthy

    E-Print Network [OSTI]

    Van Zee, John W.

    The Effect of Reformate on PEM Fuel Cell Performance Mahesh Murthy Fuel Cell Technologies, W Orleans, LA, March 10-14 Copyright M. Murthy, Fuel Cell Technologies, W.L. Gore & Associates, Inc. & W Performance Mahesh Murthy Fuel Cell Technologies, W.L. Gore & Associates, Inc. 201 Airport Road, Elkton, MD

  3. Operation of a solid oxide fuel cell on biodiesel with a partial oxidation reformer

    SciTech Connect (OSTI)

    Siefert, N, Shekhawat, D.; Gemmen, R.; Berry, D.

    2010-01-01

    The National Energy Technology Laboratory’s Office of Research & Development (NETL/ORD) has successfully demonstrated the operation of a solid oxide fuel cell (SOFC) using reformed biodiesel. The biodiesel for the project was produced and characterized by West Virginia State University (WVSU). This project had two main aspects: 1) demonstrate a catalyst formulation on monolith for biodiesel fuel reforming; and 2) establish SOFC stack test stand capabilities. Both aspects have been completed successfully. For the first aspect, in–house patented catalyst specifications were developed, fabricated and tested. Parametric reforming studies of biofuels provided data on fuel composition, catalyst degradation, syngas composition, and operating parameters required for successful reforming and integration with the SOFC test stand. For the second aspect, a stack test fixture (STF) for standardized testing, developed by Pacific Northwest National Laboratory (PNNL) and Lawrence Berkeley National Laboratory (LBNL) for the Solid Energy Conversion Alliance (SECA) Program, was engineered and constructed at NETL. To facilitate the demonstration of the STF, NETL employed H.C. Starck Ceramics GmbH & Co. (Germany) anode supported solid oxide cells. In addition, anode supported cells, SS441 end plates, and cell frames were transferred from PNNL to NETL. The stack assembly and conditioning procedures, including stack welding and sealing, contact paste application, binder burn-out, seal-setting, hot standby, and other stack assembly and conditioning methods were transferred to NETL. In the future, fuel cell stacks provided by SECA or other developers could be tested at the STF to validate SOFC performance on various fuels. The STF operated on hydrogen for over 1000 hrs before switching over to reformed biodiesel for 100 hrs of operation. Combining these first two aspects led to demonstrating the biodiesel syngas in the STF. A reformer was built and used to convert 0.5 ml/min of biodiesel into mostly hydrogen and carbon monoxide (syngas.) The syngas was fed to the STF and fuel cell stack. The results presented in this experimental report document one of the first times a SOFC has been operated on syngas from reformed biodiesel.

  4. Technical and economic assessment of producing hydrogen by reforming syngas from the Battelle indirectly heated biomass gasifier

    SciTech Connect (OSTI)

    Mann, M.K. [National Renewable Energy Lab., Golden, CO (United States). Industrial Technologies Div.

    1995-08-01

    The technical and economic feasibility of producing hydrogen from biomass by means of indirectly heated gasification and steam reforming was studied. A detailed process model was developed in ASPEN Plus{trademark} to perform material and energy balances. The results of this simulation were used to size and cost major pieces of equipment from which the determination of the necessary selling price of hydrogen was made. A sensitivity analysis was conducted on the process to study hydrogen price as a function of biomass feedstock cost and hydrogen production efficiency. The gasification system used for this study was the Battelle Columbus Laboratory (BCL) indirectly heated gasifier. The heat necessary for the endothermic gasification reactions is supplied by circulating sand from a char combustor to the gasification vessel. Hydrogen production was accomplished by steam reforming the product synthesis gas (syngas) in a process based on that used for natural gas reforming. Three process configurations were studied. Scheme 1 is the full reforming process, with a primary reformer similar to a process furnace, followed by a high temperature shift reactor and a low temperature shift reactor. Scheme 2 uses only the primary reformer, and Scheme 3 uses the primary reformer and the high temperature shift reactor. A pressure swing adsorption (PSA) system is used in all three schemes to produce a hydrogen product pure enough to be used in fuel cells. Steam is produced through detailed heat integration and is intended to be sold as a by-product.

  5. Yes, Parking Reform Is Possible: A progress report from the author of 'The High Cost of Free Parking'

    E-Print Network [OSTI]

    Shoup, Donald

    2011-01-01

    The High Cost of Free Parking, was updated and published ll\\Center UCTC-FR-20| I-2| Yes, Parking Reform Is Possible: Aof The High Cost of Free Parking Donald Shoup University of

  6. Investigation of Reaction Networks and Active Sites In Bio-Ethanol Steam Reforming Over Co-Based Catalysts

    Broader source: Energy.gov [DOE]

    Paper by Umit S. Ozkan, Hua Song, and Lingzhi Zhang (Ohio State University) on the fundamental understanding of reaction networks, active sites of deactivation mechanisms of potential bio-ethanol steam reforming catalysts.

  7. Rethinking the clinical vs. social reform debate: a dialectical approach to defining social work in the 21st century

    E-Print Network [OSTI]

    Thompson, John Brandon

    2012-08-31

    There is a historical tension in social work between the clinical and social reform perspectives. The original goal for this dissertation was to offer pragmatism as a philosophical orientation that would make sense of these two seemingly disparate...

  8. An analysis of the impact of the Bipartisan Campaign Reform Act of 2002 on the congressional committee assignment process

    E-Print Network [OSTI]

    Velasco, John R. (John Richard)

    2006-01-01

    With the passage of the 2002 Bipartisan Campaign Reform Act (BCRA), a flurry of research has been conducted on the impact on political parties. However, there exists a gap in the research regarding the impact of the ...

  9. Effects of the Third Reform Act and the Irish Home Rule Debate on Edinburgh politics, 1885-6 

    E-Print Network [OSTI]

    Thompson, Michael Kyle

    2012-11-30

    This thesis is a study of the effects of the Third Reform Act and Irish Home Rule on the politics of late-Victorian Edinburgh focussing on the general elections of 1885 and 1886. Although the impact on British politics ...

  10. Fast tracking land reform and rural livelihoods in mashonaland west province of Zimbabwe : opportunities and constraints, 2000-2013 

    E-Print Network [OSTI]

    Mkodzongi, Grasian

    2013-11-27

    The implementation of Zimbabwe’s Fast Track Land Reform Program (FTLRP) in 2000 generated polarised debates across academia and in the media. Some commentators dismissed the FTLRP as a politically motivated ‘land grab’, ...

  11. Where Do I Belong?: Evolving Reform and Identity Amongst the Zeme Heraka of North Cachar Hills, Assam, India. 

    E-Print Network [OSTI]

    Longkumer, Arkotong

    2008-01-01

    The focus of this thesis is the Heraka movement and its impact on the Zeme, a ‘Naga tribe’, in the North Cachar Hills of Assam, India. The Heraka is a religious reform movement derived from the traditional practice known ...

  12. The Effect Of ZnO Addition On Co/C Catalyst For Vapor And Aqueous Phase Reforming Of Ethanol

    SciTech Connect (OSTI)

    Davidson, Stephen; Sun, Junming; Hong, Yongchun; Karim, Ayman M.; Datye, Abhaya K.; Wang, Yong

    2014-02-05

    The effect of ZnO addition on the oxidation behavior of Co along with catalytic performance in vapor and aqueous phase reforming of ethanol were investigated on Co supported on carbon black (XC-72R). Carbon was selected to minimize the support interactions. Effect of ZnO addition during both vapor and aqueous phase reforming were compared at 250 °C. ZnO addition inhibited the reduction of cobalt oxides by H2 and created surface sites for H2O activation. During vapor phase reforming at 450 °C the redox of cobalt, driven by steam oxidation and H2 reduction, trended to an equilibrium of Co0/Co2+. ZnO showed no significant effect on cobalt oxidation, inferred from the minor changes of C1 product yield. Surface sites created by ZnO addition enhanced water activation and oxidation of surface carbon species, increasing CO2 selectivity. At 250 °C cobalt reduction was minimal, in situ XANES demonstrated that ZnO addition significantly facilitated oxidation of Co0 under vapor phase reforming conditions, demonstrated by lower C1 product yield. Sites introduced by ZnO addition improved the COx selectivity at 250 °C. Both Co/C and Co-ZnO/C rapidly oxidized under aqueous phase reaction conditions at 250 °C, showing negligible activity in aqueous phase reforming. This work suggests that ZnO affects the activation of H2O for Co catalysts in ethanol reforming.

  13. Reforming a large lecture modern physics course for engineering majors using a PER-based design

    E-Print Network [OSTI]

    McKagan, S B; Wieman, C E

    2006-01-01

    We have reformed a large lecture modern physics course for engineering majors by radically changing both the content and the learning techniques implemented in lecture and homework. Traditionally this course has been taught in a manner similar to the equivalent course for physics majors, focusing on mathematical solutions of abstract problems. Based on interviews with physics and engineering professors, we developed a syllabus and learning goals focused on content that was more useful to our actual student population: engineering majors. The content of this course emphasized reasoning development, model building, and connections to real world applications. In addition we implemented a variety of PER-based learning techniques, including peer instruction, collaborative homework sessions, and interactive simulations. We have assessed the effectiveness of reforms in this course using pre/post surveys on both content and beliefs. We have found significant improvements in both content knowledge and beliefs compared...

  14. Making contracting work better and cost less: Report of the Contract Reform Team

    SciTech Connect (OSTI)

    Not Available

    1994-02-01

    In June 1993, Secretary of Energy Hazel O`Leary formed a Contract Reform Team, chaired by Deputy Secretary Bill White, to evaluate the contracting practices of the Department of Energy and to formulate specific proposals for improving those practices. This report summarizes the results of the work of the Contract Reform Team. It recommends actions for implementation that will significantly improve the Department`s contracting practices and will enable the Department to help create a government that -- in the words of Vice President Gore -- {open_quotes}works better and costs less.{close_quotes} These actions and the deadlines for their implementation are listed. Among other things, they recommend replacing the Department`s standard Management and Operating Contract with a new Performance-Based Management Contract and strengthening the Department`s systems for selecting and managing contractors.

  15. The Clinton campaign for health-care reform: epistemology in a populist rhetoric 

    E-Print Network [OSTI]

    Leugs, Michael Edward Carpenter

    1995-01-01

    favored a wait-and-see approach that undermined the president's ambitious ? and activist ? agenda. Through his health-care-reform campaign, Clinton gave up his power to define political ideals and gradually rendered himself irrelevant to the discussion... on the national agenda. Like much contemporary campaign oratory, Clinton's was cast mostly in the epideictic or ceremonial mode, a type of rhetoric concerned with values; his speeches usually dealt with virtues like hard work and democracy. Within this context...

  16. Synthesis and characterization of catalysts containing nickel for reforming methane with carbon dioxide 

    E-Print Network [OSTI]

    Sommer, Michael Edward

    1988-01-01

    may have reacted with oxygen. This was confirmed by a thermal analysis which revealed an endothermic peak corresponding to a 15% weight loss on ignition at 600'C. Nitrogen was passed through the reactor during the warm up period. Manual adjustment... to form and to be distributed on the atomic scale, thus yielding active catalysts. CHAPTER II LITERATURE REVIEW Traditional reforming of hydrocarbons has been performed using steam. New processes are in need of a syngas with lower hydrogen content...

  17. Domesticating the Reformation: Material Culture, Memory and Confessional Identity in Early Modern England

    E-Print Network [OSTI]

    Walsham, Alexandra

    2015-01-01

    Museum. This is an example of tin-glazed earthenware (conventionally known as delftware) made in the Netherlands in the late seventeenth century. This extraordinary large plate or charger shows the figures of four religious reformers (John Wyclif... as they ceased to comply with current taste and became obsolete.21 As elsewhere, in England tin-glazed earthenware took a variety of forms: from large chargers to smaller plates, dishes, and bowls on which food might be served; posset pots, mugs, tankards...

  18. Immigration Reform: Policies and Implementation - An Evaluation of American Immigration Policy and Recommended Changes 

    E-Print Network [OSTI]

    Buck, Caitlin; Cravatt, Cody; Fagin, Paul; Finney, Angela; Gomes, Rafael; Shan, Sandy; Skarboe, Bjorne; Sarmiento Quezada, Brenda; Wagner, Jason

    2010-01-01

    frequently changed. During the nineteenth century, the United States government maintained a ?laissez faire? policy in which most of the regulation was left to state and local discretion.12 However, by the late nineteenth century, the federal government... ? Personnel ? Management ? Funding Bush School of Government Immigration Reform: Policies and Implementation 2 To illustrate how the policy focus areas interact with the areas of concern a few examples are provided herein. Technology concerns...

  19. IT Reform: Energy TechStat Examines Identity Program | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergy HeadquartersFuelBConservation Standards and TestEquipment: Energy ConservationReform

  20. Can CO-tolerant Anodes be Economically Viable for PEMFC Applications with Reformates?

    SciTech Connect (OSTI)

    He, P.; Zhang, Y.; Ye., S.; Wang, J. X.

    2014-10-05

    Several years ago, the answer to this question was negative based on the criteria for an anode with <0.1 mg cm-2 of platinum group metals to perform similarly without and with 50 ppm CO in hydrogen proton exchange membrane fuel cells (PEMFCs). Now, with the amount of CO impurities reduced to 10 ppm in reformates, a <1% performance loss with a 1.5% air-bleed has become a reasonable target. The CO-tolerant catalyst also needs to be dissolution resistant up to 0.93 V, viz., the potential experienced at the anode during startup and shutdown of the fuel cells. We recently demonstrated our ability to simultaneously enhance activity and stability by using single crystalline Ru@Pt core-shell nanocatalysts. Here, we report that the performance target with reformates was met using bilayer-thick Ru@Pt core-shell nanocatalysts with 0.047 mg cm-2 Pt and 0.024 mg cm-2 Ru loading, supporting a positive prognosis for the economically viable use of reformates in PEMFC applications.

  1. DWPF COAL CARBON WASTE ACCEPTANCE CRITERIA LIMIT EVALUATION

    SciTech Connect (OSTI)

    Lambert, D.; Choi, A.

    2010-06-21

    A paper study was completed to assess the impact on the Defense Waste Processing Facility (DWPF)'s Chemical Processing Cell (CPC) acid addition and melter off-gas flammability control strategy in processing Sludge Batch 10 (SB10) to SB13 with an added Fluidized Bed Steam Reformer (FBSR) stream and two Salt Waste Processing Facility (SWPF) products (Strip Effluent and Actinide Removal Stream). In all of the cases that were modeled, an acid mix using formic acid and nitric acid could be achieved that would produce a predicted Reducing/Oxidizing (REDOX) Ratio of 0.20 Fe{sup +2}/{Sigma}Fe. There was sufficient formic acid in these combinations to reduce both the manganese and mercury present. Reduction of manganese and mercury are both necessary during Sludge Receipt and Adjustment Tank (SRAT) processing, however, other reducing agents such as coal and oxalate are not effective in this reduction. The next phase in this study will be experimental testing with SB10, FBSR, and both SWPF simulants to validate the assumptions in this paper study and determine whether there are any issues in processing these streams simultaneously. The paper study also evaluated a series of abnormal processing conditions to determine whether potential abnormal conditions in FBSR, SWPF or DWPF would produce melter feed that was too oxidizing or too reducing. In most of the cases that were modeled with one parameter at its extreme, an acid mix using formic acid and nitric acid could be achieved that would produce a predicted REDOX of 0.09-0.30 (target 0.20). However, when a run was completed with both high coal and oxalate, with minimum formic acid to reduce mercury and manganese, the final REDOX was predicted to be 0.49 with sludge and FBSR product and 0.47 with sludge, FBSR product and both SWPF products which exceeds the upper REDOX limit.

  2. Impact of current health care reform proposals on people with chronic illnesses

    E-Print Network [OSTI]

    Hall, Jean P.; Moore, Janice M.; Otto, B.; Salley, S.

    2009-11-07

    For more information, contact Barbara Otto, HDA, 312-265-9090 or go to www.hdadvocates.org 1 Impact of Current Health Care Reform Proposals on People with Chronic Illnesses November 7, 2009 State high-risk insurance pools serve people... who have been denied coverage because of pre- existing conditions or who don’t have access to employer based coverage. There are 35 state high-risk insurance pools across the country serving approximately 200,000 people. The U.S. Congress...

  3. Solid oxide fuel cell with internal reforming, catalyzed interconnect for use therewith, and methods

    SciTech Connect (OSTI)

    Liu, Di-Jia; Guan, Jie; Minh, Nguyen

    2010-06-08

    A catalyzed interconnect for an SOFC electrically connects an anode and an anodic current collector and comprises a metallic substrate, which provides space between the anode and anodic current collector for fuel gas flow over at least a portion of the anode, and a catalytic coating on the metallic substrate comprising a catalyst for catalyzing hydrocarbon fuel in the fuel gas to hydrogen rich reformate. An SOFC including the catalyzed anodic inter-connect, a method for operating an SOFC, and a method for making a catalyzed anodic interconnect are also disclosed.

  4. Investigation of Fuel Chemistry and Bed Performance in a Fluidized Bed Black Liquor Steam Reformer

    SciTech Connect (OSTI)

    Kevin Whitty

    2007-06-30

    University of Utah's project entitled 'Investigation of Fuel Chemistry and Bed Performance in a Fluidized Bed Black Liquor Steam Reformer' (DOE Cooperative Agreement DE-FC26-02NT41490) was developed in response to a solicitation released by the U.S. Department of Energy in December 2001, requesting proposals for projects targeted towards black liquor/biomass gasification technology support research and development. Specifically, the solicitation was seeking projects that would provide technical support for Department of Energy supported black liquor and biomass gasification demonstration projects under development at the time.

  5. A simple reform for treating the loss of accuracy of Humlicek's W4 algorithm near the real axis

    E-Print Network [OSTI]

    Zaghloul, Mofreh R

    2015-01-01

    We present a simple reform for treating the reported problem of loss-of-accuracy near the real axis of Humlicek's w4 algorithm, widely used for the calculation of the Faddeyeva or complex probability function. The reformed routine maintains the claimed accuracy of the algorithm over a wide and fine grid that covers all the domain of the real part, x, of the complex input variable, z=x+iy, and values for the imaginary part in the range y=[10-30, 10+30

  6. OhSU is moving into a new era. Our work will be defined by health reform and the decline in public resources, and we will be challenged in profound ways. Yet we are well

    E-Print Network [OSTI]

    Chapman, Michael S.

    the next five years OhSU is moving into a new era. Our work will be defined by health reform health care reform and reduced public funding. OHSU laid the groundwork for success in 2007 by adopting, and sustainability and green building practices. OHSU has been vocal and active in the health reform conversation

  7. Resolution 11.35: Community Initiatives to Reform and Regulate Greek Life at Wesleyan University Sponsors: Matt Leibowitz `14 , Nicole Brenner `15, Alex Pack `14, Scott Elias `14, Ben

    E-Print Network [OSTI]

    Royer, Dana

    Resolution 11.35: Community Initiatives to Reform and Regulate Greek Life at Wesleyan University organizations and the administration to produce further reforms, such as through adopting bestpractices from in order to facilitate the changes in this resolution and develop further reforms b. Collecting

  8. Reformer assisted lean NO.sub.x catalyst aftertreatment system and method

    DOE Patents [OSTI]

    Kalyanaraman, Mohan (Media, PA); Park, Paul W. (Peoria, IL); Ragle, Christie S. (Havana, IL)

    2010-06-29

    A method and apparatus for catalytically processing a gas stream passing therethrough to reduce the presence of NO.sub.x therein, wherein the apparatus includes a first catalyst composed of a silver-containing alumina that is adapted for catalytically processing the gas stream at a first temperature range, a second catalyst composed of a copper-containing zeolite located downstream from the first catalyst, wherein the second catalyst is adapted for catalytically processing the gas stream at a lower second temperature range relative to the first temperature range, a hydrocarbon compound for injection into the gas stream upstream of the first catalyst to provide a reductant, and a reformer for reforming a portion of the hydrocarbon compound into H.sub.2 and/or oxygenated hydrocarbon for injection into the gas stream upstream of the first catalyst. The second catalyst is adapted to facilitate the reaction of reducing NOx into N.sub.2, whereby the intermediates are produced via the first catalyst reacting with NOx and hydrocarbons.

  9. Process Options Description for Steam Reforming Flowsheet Model of INEEL Tank Farm Waste

    SciTech Connect (OSTI)

    Taylor, D.D.; Barnes, C.M.; Nichols, T.T.

    2002-05-21

    Technical information is provided herein that is required for development of a steady-state process simulation of a baseline steam reforming treatment train for Tank Farm waste at the Idaho National Engineering and Environmental Laboratory (INEEL). This document supercedes INEEL/EXT-2001-173, produced in FY2001 to support simulation of the direct vitrification treatment train which was the previous process baseline. A process block flow diagram for steam reforming is provided, together with a list of unit operations which constitute the process. A detailed description of each unit operation is given which includes its purpose, principal phenomena present, expected pressure and temperature ranges, key chemical species in the inlet steam, and the proposed manner in which the unit operation is to be modeled in the steady state process simulation. Models for the unit operations may be mechanistic (based on first principles), empirical (based solely on pilot test data without extrapolation) , or by correlations (based on extrapolative or statistical schemes applied to pilot test data). Composition data for the expected process feed streams is provided.

  10. CHARM COST-EFFECTIVE HIGH-EFFICIENCY ADVANCED REFORMING MODULE FINAL TECHNICAL REPORT

    SciTech Connect (OSTI)

    Pollica, Darryl; Cross, James C; Sharma, Atul; Shi, Yanlong; Clawson, Lawrence; O'Brien, Chris; Gilhooly, Kara; Kim, Changsik; Quet, Pierre-Francois

    2009-09-02

    Background Creation of a hydrogen infrastructure is an important prerequisite of widespread fuel cell commercialization, especially for the automotive market. Hydrogen is an attractive fuel since it offers an opportunity to replace petroleum-based fuels, but hydrogen occurs naturally only in chemical compounds like water or hydrocarbons that must be chemically converted to produce it. While an ultimate goal is to produce hydrogen through renewable energy sources, steam methane reforming (SMR) of natural gas is currently the most economical solution to initiate the transition to a hydrogen economy. Centralized hydrogen generation using large industrial SMR plants is already in place to serve customers. Yet, because of the weight and size of cylinders needed to contain hydrogen gas or liquid, transportation of hydrogen may only be economical for short distances. Consequently, distributed natural gas reforming, which trades off the economies of scale of large plants for simplified delivery logistics, is an attractive alternative that could address immediate problems with the lack of hydrogen infrastructure.

  11. Exhaust gas fuel reforming of Diesel fuel by non-thermal arc discharge for NOx trap regeneration

    E-Print Network [OSTI]

    Boyer, Edmond

    , coming into force in September 2014, set a 56 % reduction of NOx emissions compared to Euro stage V (80 trap technology, also called NOx Storage and Reduction (NSR), was first developed by Toyota in 199411 Exhaust gas fuel reforming of Diesel fuel by non- thermal arc discharge for NOx trap regeneration

  12. Role of metal-support interactions on the activity of Pt and Rh catalysts for reforming methane and butane.

    SciTech Connect (OSTI)

    Rossignol, C.; Krause, T.; Krumpelt, M.

    2002-01-11

    For residential fuel cell systems, reforming of natural gas is one option being considered for providing the H{sub 2} necessary for the fuel cell to operate. Industrially, natural gas is reformed using Ni-based catalysts supported on an alumina substrate, which has been modified to inhibit coke formation. At Argonne National Laboratory, we have developed a new family of catalysts derived from solid oxide fuel cell technology for reforming hydrocarbon fuels to generate H{sub 2}. These catalysts consist of a transition metal supported on an oxide-ion-conducting substrate, such as ceria, that has been doped with a small amount of a non-reducible element, such as gadolinium, samarium, or zirconium. Unlike alumina, the oxide-ion-conducting substrate has been shown to induce strong metal-support interactions. Metal-support interactions are known to play an important role in influencing the catalytic activity of many metals supported on oxide supports. Based on results from temperature-programmed reduction/oxidation and kinetic reaction studies, this paper discusses the role of the metal and the substrate in the metal-support interactions, and how these interactions influence the activity and the selectivity of the catalyst in reforming methane and butane to hydrogen for use in fuel cell power systems.

  13. REFORMER MODEL DEVELOPMENT FOR HYDROGEN PRODUCTION J. Bellan, N. Okong'o, K. Harstad, P. Le Clercq * and A. Leboissetier

    E-Print Network [OSTI]

    integration and reactor configuration" · Relevance: address the goal "Research and develop low cost, highly-competitive with gasoline due to ... capital costs" · H: "Areas for reforming technology improvements include ... reactor as possible use fundamental principles · Sequence of the approach · Resolve all scales of the flow in a small

  14. Hydrogen Bond Breaking and Reformation in Alcohol Oligomers Following Vibrational Relaxation of a Non-Hydrogen-Bond Donating Hydroxyl Stretch

    E-Print Network [OSTI]

    Fayer, Michael D.

    Hydrogen Bond Breaking and Reformation in Alcohol Oligomers Following Vibrational Relaxation of a Non-Hydrogen-Bond Donating Hydroxyl Stretch K. J. Gaffney, I. R. Piletic, and M. D. Fayer* Department measured with ultrafast infrared pump-probe experiments. Non-hydrogen-bond donating OD stretches (2690 cm-1

  15. POST HOC STUDY OF A STATE SELECTION PROCESS TO PREDICT STATE READINESS TO PARTICIPATE IN SCHOOLWIDE INCLUSIVE SCHOOL REFORM

    E-Print Network [OSTI]

    Mitchiner, Melinda Sue

    2014-12-31

    by the national center for selecting state partners was predictive of state readiness to participate in schoolwide inclusive school reform, and to assess utility of the process for use by other national centers. The state selection process used by the national...

  16. FEEDSTOCK-FLEXIBLE REFORMER SYSTEM (FFRS) FOR SOLID OXIDE FUEL CELL (SOFC)- QUALITY SYNGAS

    SciTech Connect (OSTI)

    Kelly Jezierski; Andrew Tadd; Johannes Schwank; Roland Kibler; David McLean; Mahesh Samineni; Ryan Smith; Sameer Parvathikar; Joe Mayne; Tom Westrich; Jerry Mader; F. Michael Faubert

    2010-07-30

    The U.S. Department of Energy National Energy Technology Laboratory funded this research collaboration effort between NextEnergy and the University of Michigan, who successfully designed, built, and tested a reformer system, which produced highquality syngas for use in SOFC and other applications, and a novel reactor system, which allowed for facile illumination of photocatalysts. Carbon and raw biomass gasification, sulfur tolerance of non-Platinum Group Metals (PGM) based (Ni/CeZrO2) reforming catalysts, photocatalysis reactions based on TiO2, and mild pyrolysis of biomass in ionic liquids (ILs) were investigated at low and medium temperatures (primarily 450 to 850 C) in an attempt to retain some structural value of the starting biomass. Despite a wide range of processes and feedstock composition, a literature survey showed that, gasifier products had narrow variation in composition, a restriction used to develop operating schemes for syngas cleanup. Three distinct reaction conditions were investigated: equilibrium, autothermal reforming of hydrocarbons, and the addition of O2 and steam to match the final (C/H/O) composition. Initial results showed rapid and significant deactivation of Ni/CeZrO2 catalysts upon introduction of thiophene, but both stable and unstable performance in the presence of sulfur were obtained. The key linkage appeared to be the hydrodesulfurization activity of the Ni reforming catalysts. For feed stoichiometries where high H2 production was thermodynamically favored, stable, albeit lower, H2 and CO production were obtained; but lower thermodynamic H2 concentrations resulted in continued catalyst deactivation and eventual poisoning. High H2 levels resulted in thiophene converting to H2S and S surface desorption, leading to stable performance; low H2 levels resulted in unconverted S and loss in H2 and CO production, as well as loss in thiophene conversion. Bimetallic catalysts did not outperform Ni-only catalysts, and small Ni particles were found to have lower activities under S-free conditions, but did show less effect of S on performance, in this study. Imidazolium-based ILs, choline chloride compounds and low-melting eutectics of metal nitrates were evaluated, and it was found that, ILs have some capacity to dissolve cellulose and show thermal stability to temperatures where pyrolysis begins, have no vapor pressure, (simplifying product recoveries), and can dissolve ionic metal salts, allowing for the potential of catalytic reactions on breakdown intermediates. Clear evidence of photoactive commercial TiO2 was obtained, but in-house synthesis of photoactive TiO2 proved difficult, as did fixed-bed gasification, primarily due to the challenge of removing the condensable products from the reaction zone quickly enough to prevent additional reaction. Further investigation into additional non-PGM catalysts and ILs is recommended as a follow-up to this work.

  17. Nano-structured noble metal catalysts based on hexametallate architecture for the reforming of hydrocarbon fuels

    DOE Patents [OSTI]

    Gardner, Todd H.

    2015-09-15

    Nano-structured noble metal catalysts based on hexametallate lattices, of a spinel block type, and which are resistant to carbon deposition and metal sulfide formation are provided. The catalysts are designed for the reforming of hydrocarbon fuels to synthesis gas. The hexametallate lattices are doped with noble metals (Au, Pt, Rh, Ru) which are atomically dispersed as isolated sites throughout the lattice and take the place of hexametallate metal ions such as Cr, Ga, In, and/or Nb. Mirror cations in the crystal lattice are selected from alkali metals, alkaline earth metals, and the lanthanide metals, so as to reduce the acidity of the catalyst crystal lattice and enhance the desorption of carbon deposit forming moieties such as aromatics. The catalysts can be used at temperatures as high as 1000.degree. C. and pressures up to 30 atmospheres. A method for producing these catalysts and applications of their use also is provided.

  18. Electro-catalytic oxidation device for removing carbon from a fuel reformate

    DOE Patents [OSTI]

    Liu, Di-Jia (Naperville, IL)

    2010-02-23

    An electro-catalytic oxidation device (ECOD) for the removal of contaminates, preferably carbonaceous materials, from an influent comprising an ECOD anode, an ECOD cathode, and an ECOD electrolyte. The ECOD anode is at a temperature whereby the contaminate collects on the surface of the ECOD anode as a buildup. The ECOD anode is electrically connected to the ECOD cathode, which consumes the buildup producing electricity and carbon dioxide. The ECOD anode is porous and chemically active to the electro-catalytic oxidation of the contaminate. The ECOD cathode is exposed to oxygen, and made of a material which promotes the electro-chemical reduction of oxygen to oxidized ions. The ECOD electrolyte is non-permeable to gas, electrically insulating and a conductor to oxidized. The ECOD anode is connected to the fuel reformer and the fuel cell. The ECOD electrolyte is between and in ionic contact with the ECOD anode and the ECOD cathode.

  19. Autothermal reforming of natural gas to synthesis gas:reference: KBR paper #2031.

    SciTech Connect (OSTI)

    Mann, David (KBR, Houston, TX); Rice, Steven, D.

    2007-04-01

    This Project Final Report serves to document the project structure and technical results achieved during the 3-year project titled Advanced Autothermal Reformer for US Dept of Energy Office of Industrial Technology. The project was initiated in December 2001 and was completed March 2005. It was a joint effort between Sandia National Laboratories (Livermore, CA), Kellogg Brown & Root LLC (KBR) (Houston, TX) and Sued-Chemie (Louisville, KY). The purpose of the project was to develop an experimental capability that could be used to examine the propensity for soot production in an Autothermal Reformer (ATR) during the production of hydrogen-carbon monoxide synthesis gas intended for Gas-to-Liquids (GTL) applications including ammonia, methanol, and higher hydrocarbons. The project consisted of an initial phase that was focused on developing a laboratory-scale ATR capable of reproducing conditions very similar to a plant scale unit. Due to budget constraints this effort was stopped at the advanced design stages, yielding a careful and detailed design for such a system including ATR vessel design, design of ancillary feed and let down units as well as a PI&D for laboratory installation. The experimental effort was then focused on a series of measurements to evaluate rich, high-pressure burner behavior at pressures as high as 500 psi. The soot formation measurements were based on laser attenuation at a view port downstream of the burner. The results of these experiments and accompanying calculations show that soot formation is primarily dependent on oxidation stoichiometry. However, steam to carbon ratio was found to impact soot production as well as burner stability. The data also showed that raising the operating pressure while holding mass flow rates constant results in considerable soot formation at desirable feed ratios. Elementary reaction modeling designed to illuminate the role of CO{sub 2} in the burner feed showed that the conditions in the burner allow for the direct participation of CO{sub 2} in the oxidation chemistry.

  20. Thermodynamics of Hydrogen Production from Dimethyl Ether Steam Reforming and Hydrolysis

    SciTech Connect (OSTI)

    T.A. Semelsberger

    2004-10-01

    The thermodynamic analyses of producing a hydrogen-rich fuel-cell feed from the process of dimethyl ether (DME) steam reforming were investigated as a function of steam-to-carbon ratio (0-4), temperature (100 C-600 C), pressure (1-5 atm), and product species: acetylene, ethanol, methanol, ethylene, methyl-ethyl ether, formaldehyde, formic acid, acetone, n-propanol, ethane and isopropyl alcohol. Results of the thermodynamic processing of dimethyl ether with steam indicate the complete conversion of dimethyl ether to hydrogen, carbon monoxide and carbon dioxide for temperatures greater than 200 C and steam-to-carbon ratios greater than 1.25 at atmospheric pressure (P = 1 atm). Increasing the operating pressure was observed to shift the equilibrium toward the reactants; increasing the pressure from 1 atm to 5 atm decreased the conversion of dimethyl ether from 99.5% to 76.2%. The order of thermodynamically stable products in decreasing mole fraction was methane, ethane, isopropyl alcohol, acetone, n-propanol, ethylene, ethanol, methyl-ethyl ether and methanol--formaldehyde, formic acid, and acetylene were not observed. The optimal processing conditions for dimethyl ether steam reforming occurred at a steam-to-carbon ratio of 1.5, a pressure of 1 atm, and a temperature of 200 C. Modeling the thermodynamics of dimethyl ether hydrolysis (with methanol as the only product considered), the equilibrium conversion of dimethyl ether is limited. The equilibrium conversion was observed to increase with temperature and steam-to-carbon ratio, resulting in a maximum dimethyl ether conversion of approximately 68% at a steam-to-carbon ratio of 4.5 and a processing temperature of 600 C. Thermodynamically, dimethyl ether processed with steam can produce hydrogen-rich fuel-cell feeds--with hydrogen concentrations exceeding 70%. This substantiates dimethyl ether as a viable source of hydrogen for PEM fuel cells.

  1. Modeling of Pressurized Electrochemistry and Steam-Methane Reforming in Solid Oxide Fuel Cells and the Effects on Thermal and Electrical Stack Performance

    SciTech Connect (OSTI)

    Recknagle, Kurtis P.; Khaleel, Mohammad A.

    2009-03-01

    Summarizes work done to extend the electrochemical performance and methane reforming submodels to include the effects of pressurization and to demonstrate this new modeling capability by simulating large stacks operating on methane-rich fuel under pressurized and non-pressurized conditions. Pressurized operation boosts electrochemical performance, alters the kinetics of methane reforming, and effects the equilibrium composition of methane fuels. This work developed constitutive submodels that couple the electrochemistry, reforming, and pressurization to yield an increased capability of the modeling tool for prediction of SOFC stack performance.

  2. A modeling software linking approach for the analysis of an integrated reforming combined cycle with hot potassium carbonate CO[subscript 2] capture

    E-Print Network [OSTI]

    Nord, Lars Olof

    The focus of this study is the analysis of an integrated reforming combined cycle (IRCC) with natural gas as fuel input. This IRCC consisted of a hydrogen-fired gas turbine (GT) with a single-pressure steam bottoming cycle ...

  3. Navigating the tension between the master narrative of the academy and the counter-narrative of reform: personal case studies from within an engineering education coalition 

    E-Print Network [OSTI]

    Merton, Prudence

    2006-08-16

    attempted to reform undergraduate engineering curricula at six U.S. institutions of higher education. Through analysis of occupational life histories, and data from a larger study of curricular change processes, two dominant social narratives emerged...

  4. A Novel Slurry-Based Biomass Reforming Process Final Technical Report

    SciTech Connect (OSTI)

    Sean C. Emerson; Timothy D. Davis; A. Peles; Ying She; Joshua Sheffel; Rhonda R. Willigan; Thomas H. Vanderspurt; Tianli Zhu

    2011-09-30

    This project was focused on developing a catalytic means of producing H2 from raw, ground biomass, such as fast growing poplar trees, willow trees, or switch grass. The use of a renewable, biomass feedstock with minimal processing can enable a carbon neutral means of producing H2 in that the carbon dioxide produced from the process can be used in the environment to produce additional biomass. For economically viable production of H2, the biomass is hydrolyzed and then reformed without any additional purification steps. Any unreacted biomass and other byproduct streams are burned to provide process energy. Thus, the development of a catalyst that can operate in the demanding corrosive environment and presence of potential poisons is vital to this approach. The concept for this project is shown in Figure 1. The initial feed is assumed to be a >5 wt% slurry of ground wood in dilute base, such as potassium carbonate (K2CO3). Base hydrolysis and reforming of the wood is carried out at high but sub-critical pressures and temperatures in the presence of a solid catalyst. A Pd alloy membrane allows the continuous removal of pure , while the retentate, including methane is used as fuel in the plant. The project showed that it is possible to economically produce H2 from woody biomass in a carbon neutral manner. Technoeconomic analyses using HYSYS and the DOE's H2A tool [1] were used to design a 2000 ton day-1 (dry basis) biomass to hydrogen plant with an efficiency of 46% to 56%, depending on the mode of operation and economic assumptions, exceeding the DOE 2012 target of 43%. The cost of producing the hydrogen from such a plant would be in the range of $1/kg H2 to $2/kg H2. By using raw biomass as a feedstock, the cost of producing hydrogen at large biomass consumption rates is more cost effective than steam reforming of hydrocarbons or biomass gasification and can achieve the overall cost goals of the DOE Fuel Cell Technologies Program. The complete conversion of wood to hydrogen, methane, and carbon dioxide was repeatedly demonstrated in batch reactors varying in size from 50 mL to 7.6 L. The different wood sources (e.g., swamp maple, poplar, and commercial wood flour) were converted in the presence of a heterogeneous catalyst and base at relatively low temperatures (e.g., 310 �������°C) at sub-critical pressures sufficient to maintain the liquid phase. Both precious metal and base metal catalysts were found to be active for the liquid phase hydrolysis and reforming of wood. Pt-based catalysts, particularly Pt-Re, were shown to be more selective toward breaking C-C bonds, resulting in a higher selectivity to hydrogen versus methane. Ni-based catalysts were found to prefer breaking C-O bonds, favoring the production of methane. The project showed that increasing the concentration of base (base to wood ratio) in the presence of Raney Ni catalysts resulted in greater selectivity toward hydrogen but at the expense of increasing the production of undesirable organic acids from the wood, lowering the amount of wood converted to gas. It was shown that by modifying Ni-based catalysts with dopants, it was possible to reduce the base concentration while maintaining the selectivity toward hydrogen and increasing wood conversion to gas versus organic acids. The final stage of the project was the construction and testing of a demonstration unit for H2 production. This continuous flow demonstration unit consisted of wood slurry and potassium carbonate feed pump systems, two reactors for hydrolysis and reforming, and a gas-liquid separation system. The technical challenges associated with unreacted wood fines and Raney Ni catalyst retention limited the demonstration unit to using a fixed bed Raney Ni catalyst form. The lower activity of the larger particle Raney Ni in turn limited the residence time and thus the wood mass flow feed rate to 50 g min-1 for a 1 wt% wood slurry. The project demonstrated continuous H2 yields with unmodified, fixed bed Raney Ni, from 63% to 100% with correspond

  5. Gas-to-liquids synthetic fuels for use in fuel cells : reformability, energy density, and infrastructure compatibility.

    SciTech Connect (OSTI)

    Ahmed, S.; Kopasz, J. P.; Russell, B. J.; Tomlinson, H. L.

    1999-09-08

    The fuel cell has many potential applications, from power sources for electric hybrid vehicles to small power plants for commercial buildings. The choice of fuel will be critical to the pace of its commercialization. This paper reviews the various liquid fuels being considered as an alternative to direct hydrogen gas for the fuel cell application, presents calculations of the hydrogen and carbon dioxide yields from autothermal reforming of candidate liquid fuels, and reports the product gas composition measured from the autothermal reforming of a synthetic fuel in a micro-reactor. The hydrogen yield for a synthetic paraffin fuel produced by a cobalt-based Fischer-Tropsch process was found to be similar to that of retail gasoline. The advantages of the synthetic fuel are that it contains no contaminants that would poison the fuel cell catalyst, is relatively benign to the environment, and could be transported in the existing fuel distribution system.

  6. Multi-fuel reformers for fuel cells used in transportation: Assessment of hydrogen storage technologies. Phase 1, Final report

    SciTech Connect (OSTI)

    Not Available

    1994-03-01

    This report documents a portion of the work performed Multi-fuel Reformers for Fuel Cells Used in Transportation. One objective for development is to develop advanced fuel processing systems to reform methanol, ethanol, natural gas, and other hydrocarbons into hydrogen for use in transportation fuel cell systems, while a second objective is to develop better systems for on-board hydrogen storage. This report examines techniques and technology available for storage of pure hydrogen on board a vehicle as pure hydrogen of hydrides. The report focuses separately on near- and far-term technologies, with particular emphasis on the former. Development of lighter, more compact near-term storage systems is recommended to enhance competitiveness and simplify fuel cell design. The far-term storage technologies require substantial applied research in order to become serious contenders.

  7. Reforming Pyrolysis Aqueous Waste Streams to Process Hydrogen and Hydrocarbons Presentation for BETO 2015 Project Peer Review

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy BillsNo. 195 - Oct. 7,DOERTI |Service ofConditioning1: Reforming Pyrolysis

  8. Fluidized Bed Steam Reforming of Hanford LAW Using THORsm Mineralizing Technology

    SciTech Connect (OSTI)

    Olson, Arlin L.; Nicholas R Soelberg; Douglas W. Marshall; Gary L. Anderson

    2004-11-01

    The U.S. Department of Energy (DOE) documented, in 2002, a plan for accelerating cleanup of the Hanford Site, located in southeastern Washington State, by at least 35 years. A key element of the plan was acceleration of the tank waste program and completion of ''tank waste treatment by 2028 by increasing the capacity of the planned Waste Treatment Plant (WTP) and using supplemental technologies for waste treatment and immobilization.'' The plan identified steam reforming technology as a candidate for supplemental treatment of as much as 70% of the low-activity waste (LAW). Mineralizing steam reforming technology, offered by THOR Treatment Technologies, LLC would produce a denitrated, granular mineral waste form using a high-temperature fluidized bed process. A pilot scale demonstration of the technology was completed in a 15-cm-diameter reactor vessel. The pilot scale facility was equipped with a highly efficient cyclone separator and heated sintered metal filters for particulate removal, a thermal oxidizer for reduced gas species and NOx destruction, and a packed activated carbon bed for residual volatile species capture. The pilot scale equipment is owned by the DOE, but located at the Science and Technology Applications Research (STAR) Center in Idaho Falls, ID. Pilot scale testing was performed August 2–5, 2004. Flowsheet chemistry and operational parameters were defined through a collaborative effort involving Idaho National Engineering and Environmental Laboratory, Savannah River National Laboratory (SRNL), and THOR Treatment Technologies personnel. Science Application International Corporation, owners of the STAR Center, personnel performed actual pilot scale operation. The pilot scale test achieved a total of 68.7 hrs of cumulative/continuous processing operation before termination in response to a bed de-fluidization condition. 178 kg of LAW surrogate were processed that resulted in 148 kg of solid product, a mass reduction of about 17%. The process achieved essentially complete bed turnover within approximately 40 hours. Samples of mineralized solid product materials were analyzed for chemical/physical properties. SRNL will report separately the results of product performance testing that were accomplished.

  9. CH{sub 4}-CO{sub 2} reforming over Ni-substituted barium hexaaluminate catalysts

    SciTech Connect (OSTI)

    Gardner, Todd H. [U.S. DOE; Spivey, James J. [ORISE; Kugler, Edwin L.; Pakhare, Devendra

    2013-03-30

    A series of Ni-substituted barium hexaaluminate catalysts, Ba{sub 0.75}Ni{sub y}Al{sub 12?y}O{sub 19??} (y = 0.4, 0.6 and 1.0), were tested for CO{sub 2} reforming of CH{sub 4} at temperatures between 200 and 900 °C. Temperature programmed surface reaction results show that the reaction lights-off in a temperature range between 448 and 503 °C with a consistent decrease in light-off temperature with increasing Ni substitution. Isothermal runs performed at 900 °C show near equilibrium conversion and stable product concentrations for 18 h on all catalysts. Temperature programmed oxidation of the used catalysts show that the amount of carbon deposited on the catalyst increases with Ni substitution. High resolution XRD of the used Ba{sub 0.75}Ni{sub 0.4}Al{sub 11.6}O{sub 19??} catalyst shows a statistically significant contraction of the unit cell which is the result of NiO reduction from the lattice. XRD of the used catalyst also confirms the presence of graphitic carbon. XPS and ICP measurements of the as prepared catalysts show that lower levels of Ni substitution result in an increasing proportion of Ba at the surface.

  10. Ethanol Steam Reforming on Co/CeO2: The Effect of ZnO Promoter

    SciTech Connect (OSTI)

    Davidson, Stephen; Sun, Junming; Wang, Yong

    2013-12-02

    A series of ZnO promoted Co/CeO2 catalysts were synthesized and characterized using XRD, TEM, H2-TPR, CO chemisorption, O2-TPO, IR-Py, and CO2-TPD. The effects of ZnO on the catalytic performances of Co/CeO2 were studied in ethanol steam reforming. It was found that the addition of ZnO facilitated the oxidation of Co0 via enhanced oxygen mobility of the CeO2 support which decreased the activity of Co/CeO2 in C–C bond cleavage of ethanol. 3 wt% ZnO promoted Co/CeO2 exhibited minimum CO and CH4 selectivity and maximum CO2 selectivity. This resulted from the combined effects of the following factors with increasing ZnO loading: (1) enhanced oxygen mobility of CeO2 facilitated the oxidation of CHx and CO to form CO2; (2) increased ZnO coverage on CeO2 surface reduced the interaction between CHx/CO and Co/CeO2; and (3) suppressed CO adsorption on Co0 reduced CO oxidation rate to form CO2. In addition, the addition of ZnO also modified the surface acidity and basicity of CeO2, which consequently affected the C2–C4 product distributions.

  11. Promotion effect of cobalt-based catalyst with rare earth for the ethanol steam reforming

    SciTech Connect (OSTI)

    Chiou, Josh Y. Z.; Chen, Ya-Ping; Yu, Shen-Wei; Wang, Chen-Bin

    2013-12-16

    Catalytic performance of ethanol steam reforming (ESR) was investigated on praseodymium (Pr) modified ceria-supported cobalt oxide catalyst. The ceria-supported cobalt oxide (Ce-Co) catalyst was prepared by co-precipitation-oxidation (CPO) method, and the doped Pr (5 and 10 wt% loading) catalysts (Pr{sub 5}?Ce?Co and Pr{sub 10}?Ce?Co) were prepared by incipient wetness impregnation method. The reduction pretreatment under 250 and 400 °C (H250 and H400) was also studied. All samples were characterized by XRD, TPR and TEM. Catalytic performance of ESR was tested from 250 to 500 °C in a fixed-bed reactor. The doping of Pr into the ceria lattice has significantly promoted the activity and reduced the coke formation. The products distribution also can be influenced by the different reduction pretreatment. The Pr{sub 10}?Ce?Co?H400 sample is a preferential ESR catalyst, where the hydrogen distribution approaches 73% at 475 °C with less amounts (< 2%) of CO and CH{sub 4}.

  12. Report for Treating Hanford LAW and WTP SW Simulants: Pilot Plant Mineralizing Flowsheet

    SciTech Connect (OSTI)

    Arlin Olson

    2012-02-28

    The US Department of Energy is responsible for managing the disposal of radioactive liquid waste in underground storage tanks at the Hanford site in Washington State. The Hanford waste treatment and immobilization plant (WPT) will separate the waste into a small volume of high level waste (HLW), containing most of the radioactive constituents, and a larger volume of low activity waste (LAW), containing most of the non-radioactive chemical and hazardous constituents. The HLW and LAW will be converted into immobilized waste forms for disposal. Currently there is inadequate LAW vitrification capacity planned at the WTP to complete the mission within the required timeframe. Therefore additional LAW capacity is required. One candidate supplemental treatment technology is the fluidized bed steam reformer process (FBSR). This report describes the demonstration testing of the FBSR process using a mineralizing flowsheet for treating simulated Hanford LAW and secondary waste from the WTP (WTP SW). The FBSR testing project produced leach-resistant solid products and environmentally compliant gaseous effluents. The solid products incorporated normally soluble ions into an alkali alumino-silicate (NaS) mineral matrix. Gaseous emissions were found to be within regulatory limits. Cesium and rhenium were captured in the mineralized products with system removal efficiencies of 99.999% and 99.998 respectively. The durability and leach performance of the FBSR granular solid were superior to the low activity reference material (LMR) glass standards. Normalized product consistency test (PCT) release rates for constituents of concern were approximately 2 orders of magnitude less than that of sodium in the Hanford glass [standard].

  13. The potential role of a carbon tax in U.S. fiscal reform

    SciTech Connect (OSTI)

    McKibbin, Warwick; Morris, Adele; Wilcoxen, Peter; Cai, Yiyong

    2012-07-24

    This paper examines fiscal reform options in the United States with an intertemporal computable general equilibrium model of the world economy called G-Cubed. Six policy scenarios explore two overarching issues: (1) the effects of a carbon tax under alternative assumptions about the use of the resulting revenue, and (2) the effects of alternative measures that could be used to reduce the budget deficit. We examine a simple excise tax on the carbon content of fossil fuels in the U.S. energy sector starting immediately at $15 per metric ton of carbon dioxide (CO2) and rising at 4 percent above inflation each year through 2050. We investigate policies that allow the revenue from the illustrative carbon tax to reduce the long run federal budget deficit or the marginal tax rates on labor and capital income. We also compare the carbon tax to other means of reducing the deficit by the same amount. We find that the carbon tax will raise considerable revenue: $80 billion at the outset, rising to $170 billion in 2030 and $310 billion by 2050. It also significantly reduces U.S. CO2 emissions by an amount that is largely independent of the use of the revenue. By 2050, annual CO2 emissions fall by 2.5 billion metric tons (BMT), or 34 percent, relative to baseline, and cumulative emissions fall by 40 BMT through 2050. The use of the revenue affects both broad economic impacts and the composition of GDP across consumption, investment and net exports. In most scenarios, the carbon tax lowers GDP slightly, reduces investment and exports, and increases imports. The effect on consumption varies across policies and can be positive if households receive the revenue as a lump sum transfer. Using the revenue for a capital tax cut, however, is significantly different than the other policies. In that case, investment booms, employment rises, consumption declines slightly, imports increase, and overall GDP rises significantly relative to baseline through about 2040. Thus, a tax reform that uses a carbon tax to reduce capital taxes would achieve two goals: reducing CO2 emissions significantly and expanding short-run employment and the economy. We examine three ways to reduce the deficit by an equal amount. We find that raising marginal tax rates on labor income has advantages over raising tax rates on capital income or establishing a carbon tax. A labor tax increase leaves GDP close to its baseline, reduces consumption very slightly and expands net exports slightly. Investment remains essentially unchanged. In contrast, a capital tax increase causes a significant and persistent drop in investment and much larger reductions in GDP. A carbon tax falls between the two: it lowers GDP more than a labor tax increase because it reduces investment. However, its effects on investment and GDP are more moderate than the capital tax increase, and it also significantly reduces CO2 emissions. A carbon tax thus offers a way to help reduce the deficit and improve the environment, and do so with minimal disturbance to overall economic activity.

  14. CO2 Reduction by Dry Methane Reforming Over Hexaluminates: A Promising Technology for Decreasing Global Warming in a Cost Effective Manner

    SciTech Connect (OSTI)

    Salazar-Villalpando, M.D.; Gardner, T.H.

    2008-03-01

    Efficient utilization of CO2 can help to decrease global warming. Methane reforming using carbon dioxide has been of interest for many years, but recently that interest has experienced a rapid increase for both environmental and commercial reasons. The use of CO2 provides a source of clean oxygen, which eliminates the need for costly oxygen separation plants. The product of dry reforming is useful syn-gas, which can be used to generate electrical power in a SOFC or in the production of synthetic fuels (hydrocarbons and alcohols). Hexaaluminate catalysts prepared at NETL may represent a product that can be utilized for the conversion of CO2 to syn-gas. In this work, transition metals dispersed in barium hexaaluminate have shown to be promising new catalysts for dry methane reforming. In this investigation, a series of BaNixAl12-yO19-? catalysts with varying Ni content were prepared by co-precipitation followed by calcination at 1400°C. CO2 reduction by dry methane reforming was carried out to determine catalyst performance as a function of temperature and carbon formation was also quantified after the reforming tests. Results of catalysts characterization, dispersion and surface area, were correlated to catalytic performance.

  15. Low-temperature aqueous-phase reforming of ethanol on bimetallic PdZn catalysts

    SciTech Connect (OSTI)

    Xiong, Haifeng; DelaRiva, Andrew; Wang, Yong; Dayte, Abhaya

    2015-01-01

    Bimetallic PdZn catalysts supported on carbon black (CB) and carbon nanotubes (CNTs) were found to be selective for CO-free H-2 production from ethanol at low temperature (250 degrees C). On Pd, the H-2 yield was low (similar to 0.3 mol H-2/mol ethanol reacted) and the CH4/CO2 ratio was high (similar to 1.7). Addition of Zn to Pd formed the intermetallic PdZn beta phase (atomic ratio of Zn to Pd is 1) with increased H-2 yield (similar to 1.9 mol H-2/mol ethanol reacted) and CH4/CO2 ratio of <1. The higher H-2 yield and low CH4 formation was related to the improved dehydrogenation activity of the L1(0) PdZn beta phase. The TOF increased with particle size and the CNTs provided the most active and selective catalysts, which may be ascribed to pore-confinement effects. Furthermore, no significant changes in either the supports or the PdZn beta particles was found after aqueous-phase reforming (APR) indicating that the metal nanoparticles and the carbon support are hydrothermally stable in the aqueous phase at elevated temperatures and pressures (>200 degrees C, 65 bar). No CO was detected for all the catalysts performed in aqueous-phase reaction, indicating that both monometallic Pd and bimetallic PdZn catalysts have high water-gas shift activity during APR. However, the yield of H-2 is considerably lower than the theoretical value of 6 H-2 per mole ethanol which is due to the presence of oxygenated products and methane on the PdZn catalysts.

  16. Confined partial filament eruption and its reformation within a stable magnetic flux rope

    SciTech Connect (OSTI)

    Joshi, Navin Chandra; Kayshap, Pradeep; Uddin, Wahab; Srivastava, Abhishek K.; Dwivedi, B. N.; Filippov, Boris; Chandra, Ramesh; Choudhary, Debi Prasad E-mail: njoshi98@gmail.com

    2014-05-20

    We present observations of a confined partial eruption of a filament on 2012 August 4, which restores its initial shape within ?2 hr after eruption. From the Global Oscillation Network Group H? observations, we find that the filament plasma turns into dynamic motion at around 11:20 UT from the middle part of the filament toward the northwest direction with an average speed of ?105 km s{sup –1}. A little brightening underneath the filament possibly shows the signature of low-altitude reconnection below the filament eruptive part. In Solar Dynamics Observatory/Atmospheric Imaging Assembly 171 Å images, we observe an activation of right-handed helically twisted magnetic flux rope that contains the filament material and confines it during its dynamical motion. The motion of cool filament plasma stops after traveling a distance of ?215 Mm toward the northwest from the point of eruption. The plasma moves partly toward the right foot point of the flux rope, while most of the plasma returns after 12:20 UT toward the left foot point with an average speed of ?60 km s{sup –1} to reform the filament within the same stable magnetic structure. On the basis of the filament internal fine structure and its position relative to the photospheric magnetic fields, we find filament chirality to be sinistral, while the activated enveloping flux rope shows a clear right-handed twist. Thus, this dynamic event is an apparent example of one-to-one correspondence between the filament chirality (sinistral) and the enveloping flux rope helicity (positive). From the coronal magnetic field decay index, n, calculation near the flux rope axis, it is evident that the whole filament axis lies within the domain of stability (i.e., n < 1), which provides the filament stability despite strong disturbances at its eastern foot point.

  17. FROM X-RAY DIPS TO ECLIPSE: WITNESSING DISK REFORMATION IN THE RECURRENT NOVA U Sco

    SciTech Connect (OSTI)

    Ness, J.-U.; Talavera, A.; Gonzalez-Riestra, R. [XMM-Newton Science Operations Centre, ESA, P.O. Box 78, 28691 Villanueva de la Canada, Madrid (Spain); Schaefer, B. E. [Department of Physics and Astronomy, Louisiana State University, Baton Rouge, LA 70803 (United States); Dobrotka, A. [Department of Physics, Institute of Materials Science, Faculty of Materials Science and Technology, Slovak University of Technology, Jana Bottu 25, 91724 Trnava (Slovakia); Sadowski, A. [N. Copernicus Astronomical Center, Polish Academy of Sciences, Bartycka 18, 00-716 Warszawa (Poland); Drake, J. J.; Barnard, R. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Page, K. L. [Department of Physics and Astronomy, University of Leicester, Leicester LE1 7RH (United Kingdom); Hernanz, M. [Institut de Ciencies de l'Espai (CSIC-IEEC), Campus UAB, Facultat de Ciencies, C5 parell 2on, 08193 Bellaterra (Barcelona) (Spain); Sala, G. [Departament Fisica i Enginyeria Nuclear, EUETIB (UPC-IEEC), Comte d'Urgell 187, 08036 Barcelona (Spain); Starrfield, S., E-mail: juness@sciops.esa.int [School of Earth and Space Exploration, Arizona State University, Tempe, AZ 85287-1404 (United States)

    2012-01-20

    The tenth recorded outburst of the recurrent eclipsing nova U Sco was observed simultaneously in X-ray, UV, and optical by XMM-Newton on days 22.9 and 34.9 after the outburst. Two full passages of the companion in front of the nova ejecta were observed, as was the reformation of the accretion disk. On day 22.9, we observed smooth eclipses in UV and optical but deep dips in the X-ray light curve that disappeared by day 34.9, yielding clean eclipses in all bands. X-ray dips can be caused by clumpy absorbing material that intersects the line of sight while moving along highly elliptical trajectories. Cold material from the companion could explain the absence of dips in UV and optical light. The disappearance of X-ray dips before day 34.9 implies significant progress in the formation of the disk. The X-ray spectra contain photospheric continuum emission plus strong emission lines, but no clear absorption lines. Both continuum and emission lines in the X-ray spectra indicate a temperature increase from day 22.9 to day 34.9. We find clear evidence in the spectra and light curves for Thompson scattering of the photospheric emission from the white dwarf. Photospheric absorption lines can be smeared out during scattering in a plasma of fast electrons. We also find spectral signatures of resonant line scattering that lead to the observation of the strong emission lines. Their dominance could be a general phenomenon in high-inclination systems such as Cal 87.

  18. NiW and NiRu Bimetallic Catalysts for Ethylene Steam Reforming: Alternative Mechanisms for Sulfur Resistance

    SciTech Connect (OSTI)

    Rangan, M.; Yung, M. M.; Medlin, J. W.

    2012-06-01

    Previous investigations of Ni-based catalysts for the steam reforming of hydrocarbons have indicated that the addition of a second metal can reduce the effects of sulfur poisoning. Two systems that have previously shown promise for such applications, NiW and NiRu, are considered here for the steam reforming of ethylene, a key component of biomass derived tars. Monometallic and bimetallic Al{sub 2}O{sub 3}-supported Ni and W catalysts were employed for ethylene steam reforming in the presence and absence of sulfur. The NiW catalysts were less active than Ni in the absence of sulfur, but were more active in the presence of 50 ppm H{sub 2}S. The mechanism for the W-induced improvements in sulfur resistance appears to be different from that for Ru in NiRu. To probe reasons for the sulfur resistance of NiRu, the adsorption of S and C{sub 2}H{sub 4} on several bimetallic NiRu alloy surfaces ranging from 11 to 33 % Ru was studied using density functional theory (DFT). The DFT studies reveal that sulfur adsorption is generally favored on hollow sites containing Ru. Ethylene preferentially adsorbs atop the Ru atom in all the NiRu (111) alloys investigated. By comparing trends across the various bimetallic models considered, sulfur adsorption was observed to be correlated with the density of occupied states near the Fermi level while C{sub 2}H{sub 4} adsorption was correlated with the number of unoccupied states in the d-band. The diverging mechanisms for S and C{sub 2}H{sub 4} adsorption allow for bimetallic surfaces such as NiRu that enhance ethylene binding without accompanying increases in sulfur binding energy. In contrast, bimetallics such as NiSn and NiW appear to decrease the affinity of the surface for both the reagent and the poison.

  19. Why has productivity growth stagnated in most Latin-American countries since the neo-liberal reforms?

    E-Print Network [OSTI]

    Palma, J. G.

    -decade-long presidency). Also, since the end of its oil-boom, Indonesia largely abandoned its (somewhat megalomaniac) industrial policy, and soon acquired a Latin-American-style proclivity for premature financialisation and monetarist-macro. Yet, no Latin American... to be 3 seduced by the ‘discreet charm’ of a narcissistic ideology—especially if most of the so-called ‘new’ ideas were just recycled ones from the past. In Latin America (LA), what characterised the economic reforms most was that they were undertaken...

  20. Direct Internal Reformation and Mass Transport in the Solid Oxide Fuel Cell Anode: A Pore-Scale Lattice Boltzmann Study with Detailed Reaction Kinetics

    SciTech Connect (OSTI)

    Grew, Kyle N.; Joshi, Abhijit S.; Chiu, W. K. S.

    2010-11-30

    The solid oxide fuel cell (SOFC) allows the conversion of chemical energy that is stored in a given fuel, including light hydrocarbons, to electrical power. Hydrocarbon fuels, such as methane, are logistically favourable and provide high energy densities. However, the use of these fuels often results in a decreased efficiency and life. An improved understanding of the reactive flow in the SOFC anode can help address these issues. In this study, the transport and heterogeneous internal reformation of a methane based fuel is addressed. The effect of the SOFC anode's complex structure on transport and reactions is shown to exhibit a complicated interplay between the local molar concentrations and the anode structure. Strong coupling between the phenomenological microstructures and local reformation reaction rates are recognised in this study, suggesting the extension to actual microstructures may provide new insights into the reformation processes.

  1. "HEALTH REFORM: MOVING FORWARD, FOCUS ON THE STATES" Join us Monday, March 28, 2011 from 6:00pm -7:30pm for an interactive video conference. Health policy

    E-Print Network [OSTI]

    Schrag, Daniel

    "HEALTH REFORM: MOVING FORWARD, FOCUS ON THE STATES" Join us Monday, March 28, 2011 from 6:00pm - 7:30pm for an interactive video conference. Health policy experts at both the Harvard Kennedy School and Georgetown University will explore health care reform initiatives and state responses to the federal law

  2. Effect Of Preparation Methods On The Performance Of Co/Al2O3 Catalysts For Dry Reforming Of Methane

    SciTech Connect (OSTI)

    Ewbank, Jessica L.; Kovarik, Libor; Kenvin, Christian C.; Sievers, Carsten

    2014-01-06

    Two methods, dry impregnation (DI) and controlled adsorption (CA), are used for the preparation of Co/ Al2O3 catalysts for methane dry reforming reactions. Point of zero charge (PZC) measurements, pH-precipitation studies, and adsorption isotherms are used to develop a synthesis procedure in which deposition of Co2+ takes place in a more controlled manner than metal deposition during drying in synthesis by dry impregnation. The possible adsorption phenomena that occur during preparation of Co/Al2O3 catalysts by controlled adsorption are discussed. H2 chemisorption and TEM show that catalysts prepared by CA have smaller average particle sizes and higher dispersions. TPR studies show that for the sample prepared by CA a higher amount of cobalt is reduced to its metallic state and that more CoAl2O4 spinel species are present relative to DI samples. The catalyst prepared by CA shows higher activity and slower deactivation for methane dry reforming than the catalyst prepared by DI. XPS and C, H, N analysis on spent catalysts confirm two types of carbonaceous deposits are formed depending on the preparation method.

  3. Demonstration of a Highly Efficient Solid Oxide Fuel Cell Power System Using Adiabatic Steam Reforming and Anode Gas Recirculation

    SciTech Connect (OSTI)

    Powell, Michael R.; Meinhardt, Kerry D.; Sprenkle, Vincent L.; Chick, Lawrence A.; Mcvay, Gary L.

    2012-05-01

    Solid oxide fuel cells (SOFC) are currently being developed for a wide variety of applications because of their high efficiency at multiple power levels. Applications for SOFCs encompass a large range of power levels including 1-2 kW residential combined heat and power applications, 100-250 kW sized systems for distributed generation and grid extension, and MW-scale power plants utilizing coal. This paper reports on the development of a highly efficient, small-scale SOFC power system operating on methane. The system uses adiabatic steam reforming of methane and anode gas recirculation to achieve high net electrical efficiency. The anode exit gas is recirculated and all of the heat and water required for the endothermic reforming reaction are provided by the anode gas emerging from the SOFC stack. Although the single-pass fuel utilization is only about 55%, because of the anode gas recirculation the overall fuel utilization is up to 93%. The demonstrated system achieved gross power output of 1650 to 2150 watts with a maximum net LHV efficiency of 56.7% at 1720 watts. Overall system efficiency could be further improved to over 60% with use of properly sized blowers.

  4. A fast hybrid start-up process for thermally self-sustained catalytic n-butane reforming in micro-SOFC power plants

    E-Print Network [OSTI]

    Daraio, Chiara

    A fast hybrid start-up process for thermally self-sustained catalytic n-butane reforming in micro at the investigation and optimization of a hybrid start-up process for a self-sustained reactor for n-butane to syngas

  5. Testimony for the hearing on political interference with the work of government climate change scientists, Congressional Oversight and Government Reform Committee, Jan. 30,

    E-Print Network [OSTI]

    Testimony for the hearing on political interference with the work of government climate change scientists, Congressional Oversight and Government Reform Committee, Jan. 30, 2007, U. S. House, but today I am presenting testimony as an individual. My participation is not connected to my job duties

  6. Comparative Investigation of Benzene Steam Reforming over Spinel Supported Rh and Ir Catalysts

    SciTech Connect (OSTI)

    Mei, Donghai; Lebarbier, Vanessa MC; Rousseau, Roger J.; Glezakou, Vassiliki Alexandra; Albrecht, Karl O.; Kovarik, Libor; Flake, Matthew D.; Dagle, Robert A.

    2013-06-01

    In a combined experimental and first-principles density functional theory (DFT) study, benzene steam reforming (BSR) over MgAl2O4 supported Rh and Ir catalysts was investigated. Experimentally, it has been found that both highly dispersed Rh and Ir clusters (1-2 nm) on the MgAl2O4 spinel support are stable during the BSR in the temperature range of 700-850?C. Compared to the Ir/MgAl2O4 catalyst, the Rh/MgAl2O4 catalyst is more active with higher benzene turnover frequency and conversion. At typical steam conditions with the steam-to-carbon ratio > 12, the benzene conversion is only a weak function of the H2O concentration in the feed. This suggests that the initial benzene decomposition step rather than the benzene adsorption is most likely the rate-determined step in BSR over supported Rh and Ir catalysts. In order to understand the differences between the two catalysts, we followed with a comparative DFT study of initial benzene decomposition pathways over two representative model systems for each supported metal (Rh and Ir) catalysts. A periodic terrace (111) surface and an amorphous 50-atom metal cluster with a diameter of 1.0 nm were used to represent the two supported model catalysts under low and high dispersion conditions. Our DFT results show that the decreasing catalyst particle size enhances the benzene decomposition on supported Rh catalysts by lowering both C-C and C-H bond scission. The activation barriers of the C-C and the C-H bond scission decrease from 1.60 and 1.61 eV on the Rh(111) surface to 1.34 and 1.26 eV on the Rh50 cluster. For supported Ir catalysts, the decreasing particle size only affects the C-C scission. The activation barrier of the C-C scission of benzene decreases from 1.60 eV on the Ir(111) surface to 1.35 eV on the Ir50 cluster while the barriers of the C-H scission are practically the same. The experimentally measured higher BSR activity on the supported highly dispersed Rh catalyst can be rationalized by the thermodynamic limitation for the very first C-C bond scission of benzene on the small Ir50 catalyst. The C-C bond scission of benzene on the small Ir50 catalyst is highly endothermic although the barrier is competitive with the barriers of both the C-C and the C-H bond-breakings on the small Rh50 catalyst. The calculations also imply that, for the supported Rh catalysts the C-C and C-H bond scissions are competitive, independently of the Rh cluster sizes. After the initial dissociation step via either the C-C or the C-H bond scission, the C-H bond breaking seems to be more favorable rather than the C-C bond breaking on the larger Rh terrace surface. This work was financially supported by the United States Department of Energy’s Office of Biomass Program’s. Computing time was granted by a user project at the Molecular Science Computing Facility in the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory.

  7. Plasma reforming and partial oxidation of hydrocarbon fuel vapor to produce synthesis gas and/or hydrogen gas

    DOE Patents [OSTI]

    Kong, Peter C.; Detering, Brent A.

    2003-08-19

    Methods and systems for treating vapors from fuels such as gasoline or diesel fuel in an internal combustion engine, to form hydrogen gas or synthesis gas, which can then be burned in the engine to produce more power. Fuel vapor, or a mixture of fuel vapor and exhaust gas and/or air, is contacted with a plasma, to promote reforming reactions between the fuel vapor and exhaust gas to produce carbon monoxide and hydrogen gas, partial oxidation reactions between the fuel vapor and air to produce carbon monoxide and hydrogen gas, or direct hydrogen and carbon particle production from the fuel vapor. The plasma can be a thermal plasma or a non-thermal plasma. The plasma can be produced in a plasma generating device which can be preheated by contact with at least a portion of the hot exhaust gas stream, thereby decreasing the power requirements of the plasma generating device.

  8. Plasma Reforming And Partial Oxidation Of Hydrocarbon Fuel Vapor To Produce Synthesis Gas And/Or Hydrogen Gas

    DOE Patents [OSTI]

    Kong, Peter C. (Idaho Falls, ID); Detering, Brent A. (Idaho Falls, ID)

    2004-10-19

    Methods and systems are disclosed for treating vapors from fuels such as gasoline or diesel fuel in an internal combustion engine, to form hydrogen gas or synthesis gas, which can then be burned in the engine to produce more power. Fuel vapor, or a mixture of fuel vapor and exhaust gas and/or air, is contacted with a plasma, to promote reforming reactions between the fuel vapor and exhaust gas to produce carbon monoxide and hydrogen gas, partial oxidation reactions between the fuel vapor and air to produce carbon monoxide and hydrogen gas, or direct hydrogen and carbon particle production from the fuel vapor. The plasma can be a thermal plasma or a non-thermal plasma. The plasma can be produced in a plasma generating device which can be preheated by contact with at least a portion of the hot exhaust gas stream, thereby decreasing the power requirements of the plasma generating device.

  9. Catalytic roles of Co0 and Co2+ during steam reforming of ethanol on Co/MgO catalysts

    SciTech Connect (OSTI)

    Karim, Ayman M.; Su, Yu; Engelhard, Mark H.; King, David L.; Wang, Yong

    2011-02-25

    Abstract: The catalytic roles of Co0 and Co2+ during steam reforming of ethanol were investigated over Co/MgO catalysts. Catalysts with different Co0/(Co0+Co2+) fraction were prepared through calcination and/or reduction at different temperatures, and the Co0 fraction was quantified by TPR and in-situ XPS. High temperature calcination of Co/MgO allowed us to prepare catalysts with more non-reducible Co2+ incorporated in the MgO lattice, while lower calcination temperatures allowed for the preparation of catalysts with higher Co0/(Co0+Co2+) fractions. The catalytic tests on Co0, non-reducible Co2+, and reducible Co2+ indicated that Co0 is much more active than either reducible or non-reducible Co2+ for C-C cleavage and water gas shift reaction. In addition, catalysts with a higher Co0 surface fraction exhibited a lower selectivity to CH4.

  10. Ashcroft, A. T., Cheetham, A. K., Jones, R. H., Natarajan, S., Thomas, J. M., Waller, D. and Clark, S. M., "An in situ, energy-dispersive X-ray diffraction study of natural gas conversion by CO2 reforming", J.

    E-Print Network [OSTI]

    reforming", J. Physical Chemistry, Vol. 97, pg. 3355 (1993) Bastiaansen, C., Schmidt, H.-W., Nishino, T., "Synthesis, structure, and catalytic properties of the layered oxide SbOReO4·2H2O: Location of hydrogen

  11. Superior performance of Ni-W-Ce mixed-metal oxide catalysts for ethanol steam reforming: Synergistic effects of W- and Ni-dopants

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Rodriguez, Jose A.; Liu, Zongyuan; Xu, Wenqian; Yao, Siyu; Johnson-Peck, Aaron C.; Zhao, Fuzhen; Michorczyk, Piotr; Kubacka, Anna; Stach, Eric A.; Fernandez-Garica, Marcos; et al

    2014-11-26

    The ethanol steam reforming (ESR) reaction was studied over a series of Ni-W-Ce oxide catalysts. The structures of the catalysts were characterized using in-situ techniques including X-ray diffraction, Pair Distribution Function, X-ray absorption fine structure and transmission electron microscopy; while possible surface intermediates for the ESR reaction were investigated by Diffuse Reflectance Infrared Fourier Transform Spectroscopy. In these materials, all the W and part of the Ni were incorporated into the CeO? lattice, with the remaining Ni forming highly dispersed nano NiO (more »The Ni-W-Ce systeme exhibited a much larger lattice strain than those seen for Ni-Ce and W-Ce. Synergistic effects between Ni and W inside ceria produced a substantial amount of defects and O vacancies that led to high catalytic activity, selectivity and stability (i.e. resistance to coke formation) during ethanol steam reforming.« less

  12. Savannah River Site Tank 48H Waste Treatment Project Technology Readiness Assessment

    SciTech Connect (OSTI)

    Harmon, H.D.; Young, J.K.; Berkowitz, J.B.; DeVine, Jr.J.C.; Sutter, H.G.

    2008-07-01

    One of U.S. Department of Energy's (DOE) primary missions at Savannah River Site (SRS) is to retrieve and treat the high level waste (HLW) remaining in SRS tanks and close the F and H tank farms. At present, a significant impediment to timely completion of this mission is the presence of significant organic chemical contamination in Tank 48H. Tank 48H is a 1.3 million gallon tank with full secondary containment, located and interconnected within the SRS tank system. However, the tank has been isolated from the system and unavailable for use since 1983, because its contents - approximately 250,000 gallons of salt solution containing Cs-137 and other radioisotopes - are contaminated with nearly 22,000 Kg of tetraphenylborate, a material which can release benzene vapor to the tank head space in potentially flammable concentrations. An important element of the DOE SRS mission is to remove, process, and dispose of the contents of Tank 48H, both to eliminate the hazard it presents to the SRS H-Tank Farm and to return Tank 48H to service. Tank 48H must be returned to service to support operation of the Salt Waste Processing Facility, to free up HLW tank space, and to allow orderly tank closures per Federal Facility Agreement commitments. The Washington Savannah River Company (WSRC), the SRS prime contractor, has evaluated alternatives and selected two processes, Wet Air Oxidation (WAO) and Fluidized Steam Bed Reforming (FBSR) as candidates for Tank 48H processing. Over the past year, WSRC has been testing and evaluating these two processes, and DOE is nearing a final technology selection in late 2007. In parallel with WSRC's ongoing work, DOE convened a team of independent qualified experts to conduct a Technology Readiness Assessment (TRA). The purpose of the TRA was to determine the maturity level of the Tank 48H treatment technology candidates - WAO and FBSR. The methodology used for this TRA is based on detailed guidance for conducting TRAs contained in the Department of Defense (DoD), Technology Readiness Assessment Desk-book. The TRA consists of three parts: - Determination of the Critical Technology Elements (CTEs) for each of the candidate processes. - Evaluation of the Technology Readiness Levels (TRLs) of each CTE for each process. - Defining of the technology testing or engineering work necessary to bring immature technologies to the appropriate maturity levels. The TRA methodology assigns a TRL to a technology based on the lowest TRL assigned to any CTE of that technology. Based on the assessment, the overall TRL for WAO was 2 and the TRL for FBSR was 3. WAO was limited by the current lack of definition for the off-gas treatment system (TRL of 2). The FBSR Product Handling had little or no test work and therefore received the lowest score (TRL of 3) for the FBSR CTEs. In summary, both FBSR and WAO appear to be viable technologies for treatment of Tank 48H legacy waste. FBSR has a higher degree of maturity than WAO, but additional technology development will be required for both technologies. However, the Assessment Team believes that sufficient information is available for DOE to select the preferred or primary technology. Limited testing of the backup technology should be conducted as a risk mitigation strategy. (authors)

  13. SAVANNAH RIVER SITE TANK 48H WASTE TREATMENT PROJECT TECHNOLOGY READINESS ASSESSMENT

    SciTech Connect (OSTI)

    Harmon, Harry D.; Young, Joan K.; Berkowitz, Joan B.; Devine, John C.; Sutter, Herbert G.

    2008-10-25

    ABSTRACT One of U.S. Department of Energy’s (DOE) primary missions at Savannah River Site (SRS) is to retrieve and treat the high level waste (HLW) remaining in SRS tanks and close the F&H tank farms. At present, a significant impediment to timely completion of this mission is the presence of significant organic chemical contamination in Tank 48H. Tank 48H is a 1.3 million gallon tank with full secondary containment, located and interconnected within the SRS tank system. However, the tank has been isolated from the system and unavailable for use since 1983, because its contents – approximately 250,000 gallons of salt solution containing Cs-137 and other radioisotopes – are contaminated with nearly 22,000 Kg of tetraphenylborate, a material which can release benzene vapor to the tank head space in potentially flammable concentrations. An important element of the DOE SRS mission is to remove, process, and dispose of the contents of Tank 48H, both to eliminate the hazard it presents to the SRS H-Tank Farm and to return Tank 48H to service. Tank 48H must be returned to service to support operation of the Salt Waste Processing Facility, to free up HLW tank space, and to allow orderly tank closures per Federal Facility Agreement commitments. The Washington Savannah River Company (WSRC), the SRS prime contractor, has evaluated alternatives and selected two processes, Wet Air Oxidation (WAO) and Fluidized Steam Bed Reforming (FBSR) as candidates for Tank 48H processing. Over the past year, WSRC has been testing and evaluating these two processes, and DOE is nearing a final technology selection in late 2007. In parallel with WSRC’s ongoing work, DOE convened a team of independent qualified experts to conduct a Technology Readiness Assessment (TRA). The purpose of the TRA was to determine the maturity level of the Tank 48H treatment technology candidates – WAO and FBSR. The methodology used for this TRA is based on detailed guidance for conducting TRAs contained in the Department of Defense (DoD), Technology Readiness Assessment Deskbook. The TRA consists of three parts: • Determination of the Critical Technology Elements (CTEs) for each of the candidate processes. • Evaluation of the Technology Readiness Levels (TRLs) of each CTE for each process. • Defining of the technology testing or engineering work necessary to bring immature technologies to the appropriate maturity levels. The TRA methodology assigns a TRL to a technology based on the lowest TRL assigned to any CTE of that technology. Based on the assessment, the overall TRL for WAO was 2 and the TRL for FBSR was 3. WAO was limited by the current lack of definition for the off-gas treatment system (TRL of 2). The FBSR Product Handling had little or no test work and therefore received the lowest score (TRL of 3) for the FBSR CTEs. In summary, both FBSR and WAO appear to be viable technologies for treatment of Tank 48H legacy waste. FBSR has a higher degree of maturity than WAO, but additional technology development will be required for both technologies. However, the Assessment Team believes that sufficient information is available for DOE to select the preferred or primary technology. Limited testing of the backup technology should be conducted as a risk mitigation strategy.

  14. SAVANNAH RIVER SITE TANK 48H WASTE TREATMENT PROJECT TECHNOLOGY READINESS ASSESSMENT

    SciTech Connect (OSTI)

    Harmon, Harry D.; Young, Joan K.; Berkowitz, Joan B.; Devine, John C.; Sutter, Herbert G.

    2008-03-18

    One of U.S. Department of Energy's (DOE) primary missions at Savannah River Site (SRS) is to retrieve and treat the high level waste (HLW) remaining in SRS tanks and close the F&H tank farms. At present, a significant impediment to timely completion of this mission is the presence of significant organic chemical contamination in Tank 48H. Tank 48H is a 1.3 million gallon tank with full secondary containment, located and interconnected within the SRS tank system. However, the tank has been isolated from the system and unavailable for use since 1983, because its contents - approximately 250,000 gallons of salt solution containing Cs-137 and other radioisotopes - are contaminated with nearly 22,000 Kg of tetraphenylborate, a material which can release benzene vapor to the tank head space in potentially flammable concentrations. An important element of the DOE SRS mission is to remove, process, and dispose of the contents of Tank 48H, both to eliminate the hazard it presents to the SRS H-Tank Farm and to return Tank 48H to service. Tank 48H must be returned to service to support operation of the Salt Waste Processing Facility, to free up HLW tank space, and to allow orderly tank closures per Federal Facility Agreement commitments. The Washington Savannah River Company (WSRC), the SRS prime contractor, has evaluated alternatives and selected two processes, Wet Air Oxidation (WAO) and Fluidized Steam Bed Reforming (FBSR) as candidates for Tank 48H processing. Over the past year, WSRC has been testing and evaluating these two processes, and DOE is nearing a final technology selection in late 2007. In parallel with WSRC's ongoing work, DOE convened a team of independent qualified experts to conduct a Technology Readiness Assessment (TRA). The purpose of the TRA was to determine the maturity level of the Tank 48H treatment technology candidates - WAO and FBSR. The methodology used for this TRA is based on detailed guidance for conducting TRAs contained in the Department of Defense (DoD), Technology Readiness Assessment Deskbook. The TRA consists of three parts: (1) Determination of the Critical Technology Elements (CTEs) for each of the candidate processes. (2) Evaluation of the Technology Readiness Levels (TRLs) of each CTE for each process. (3) Defining of the technology testing or engineering work necessary to bring immature technologies to the appropriate maturity levels. The TRA methodology assigns a TRL to a technology based on the lowest TRL assigned to any CTE of that technology. Based on the assessment, the overall TRL for WAO was 2 and the TRL for FBSR was 3. WAO was limited by the current lack of definition for the off-gas treatment system (TRL of 2). The FBSR Product Handling had little or no test work and therefore received the lowest score (TRL of 3) for the FBSR CTEs. In summary, both FBSR and WAO appear to be viable technologies for treatment of Tank 48H legacy waste. FBSR has a higher degree of maturity than WAO, but additional technology development will be required for both technologies. However, the Assessment Team believes that sufficient information is available for DOE to select the preferred or primary technology. Limited testing of the backup technology should be conducted as a risk mitigation strategy.

  15. High Activity of Ce1-xNixO2-y for H2 Production through Ethanol Steam Reforming: Tuning Catalytic Performance through Metal-Oxide Interactions

    SciTech Connect (OSTI)

    G Zhou; L Barrio; S Agnoli; S Senanayake; J Evans; A Kubacka; M Estrella; J Hanson; A Martinez-Arias; et al.

    2011-12-31

    The importance of the oxide: Ce{sub 0.8}Ni{sub 0.2}O{sub 2-y} is an excellent catalyst for ethanol steam reforming. Metal-oxide interactions perturb the electronic properties of the small particles of metallic nickel present in the catalyst under the reaction conditions and thus suppress any methanation activity. The nickel embedded in ceria induces the formation of O vacancies, which facilitate cleavage of the OH bonds in ethanol and water.

  16. A review of "Rosenkreuzerschriften" by Johann Valentin Andreae, ed. and trans. by Roland Edighoffe and "Schriften zur christlichen Reform", ed. and trans. by Frank Böhling 

    E-Print Network [OSTI]

    Dickson, Donald R.

    2010-01-01

    Johann Valentin Andreae. Rosenkreuzerschriften. Edited and translated by Roland Edighoffer. Volume 3 of Gesammelte Schriften. Wilhelm Schmidt-Biggemann, general editor. Stuttgart-Bad Cannstatt: frommann-holzboog, 2010. 544 pp. ?254. Johann Valentin... Andreae. Schriften zur christlichen Reform. Edited and translated by Frank B?hling. Volume 6 of Gesammelte Schriften. Wilhelm Schmidt-Biggemann, general editor. Stuttgart-Bad Cannstatt: frommann-holzboog, 2010. 404 pp. ?103. Review by donald r. dickson...

  17. DWPF COAL-CARBON WASTE ACCEPTANCE CRITERIA LIMIT EVALUATION BASED ON EXPERIMENTAL WORK (TANK 48 IMPACT STUDY)

    SciTech Connect (OSTI)

    Lambert, D.; Choi, A.

    2010-10-15

    This report summarizes the results of both experimental and modeling studies performed using Sludge Batch 10 (SB10) simulants and FBSR product from Tank 48 simulant testing in order to develop higher levels of coal-carbon that can be managed by DWPF. Once the Fluidized Bed Steam Reforming (FBSR) process starts up for treatment of Tank 48 legacy waste, the FBSR product stream will contribute higher levels of coal-carbon in the sludge batch for processing at DWPF. Coal-carbon is added into the FBSR process as a reductant and some of it will be present in the FBSR product as unreacted coal. The FBSR product will be slurried in water, transferred to Tank Farm and will be combined with sludge and washed to produce the sludge batch that DWPF will process. The FBSR product is high in both water soluble sodium carbonate and unreacted coal-carbon. Most of the sodium carbonate is removed during washing but all of the coal-carbon will remain and become part of the DWPF sludge batch. A paper study was performed earlier to assess the impact of FBSR coal-carbon on the DWPF Chemical Processing Cell (CPC) operation and melter off-gas flammability by combining it with SB10-SB13. The results of the paper study are documented in Ref. 7 and the key findings included that SB10 would be the most difficult batch to process with the FBSR coal present and up to 5,000 mg/kg of coal-carbon could be fed to the melter without exceeding the off-gas flammability safety basis limits. In the present study, a bench-scale demonstration of the DWPF CPC processing was performed using SB10 simulants spiked with varying amounts of coal, and the resulting seven CPC products were fed to the DWPF melter cold cap and off-gas dynamics models to determine the maximum coal that can be processed through the melter without exceeding the off-gas flammability safety basis limits. Based on the results of these experimental and modeling studies, the presence of coal-carbon in the sludge feed to DWPF is found to have both positive (+) and negative (-) impact as summarized below: (-) Coal-carbon is a melter reductant. If excess coal-carbon is present, the resulting melter feed may be too reducing, potentially shortening the melter life. During this study, the Reduction/Oxidation Potential (REDOX) of the melter could be controlled by varying the ratio of nitric and formic acid. (-) The addition of coal-carbon increases the amount of nitric acid added and decreases the amount of formic acid added to control melter REDOX. This means that the CPC with the FBSR product is much more oxidizing than current CPC processing. In this study, adequate formic acid was present in all experiments to reduce mercury and manganese, two of the main goals of CPC processing. (-) Coal-carbon will be oxidized to carbon dioxide or carbon monoxide in the melter. The addition of coal-carbon to the FBSR product will lead to approximately 55% higher offgas production from formate, nitrate and carbon due to the decomposition of the carbon at the maximum levels in this testing. Higher offgas production could lead to higher cold cap coverage or melter foaming which could decrease melt rate. No testing was performed to evaluate the impact of the higher melter offgas flow. (+) The hydrogen production is greatly reduced in testing with coal as less formic acid is added in CPC processing. In the high acid run without coal, the peak hydrogen generation was 15 times higher than in the high acid run with added coal-carbon. (+) Coal-carbon is a less problematic reducing agent than formic acid, since the content of both carbon and hydrogen are important in evaluating the flammability of the melter offgas. Processing with coal-carbon decreases the amount of formic acid added in the CPC, leading to a lower flammability risk in processing with coal-carbon compared to the current DWPF flowsheet. (+) The seven SB10 formulations which were tested during the bench-scale CPC demonstration were all determined to be within the off-gas flammability safety basis limits during the 9X/5X off-gas surge for normal bubbled melter

  18. Superior performance of Ni-W-Ce mixed-metal oxide catalysts for ethanol steam reforming: Synergistic effects of W- and Ni-dopants

    SciTech Connect (OSTI)

    Rodriguez, Jose A.; Liu, Zongyuan; Xu, Wenqian; Yao, Siyu; Johnson-Peck, Aaron C.; Zhao, Fuzhen; Michorczyk, Piotr; Kubacka, Anna; Stach, Eric A.; Fernandez-Garica, Marcos; Senanayake, Sanjaya D.

    2014-11-26

    The ethanol steam reforming (ESR) reaction was studied over a series of Ni-W-Ce oxide catalysts. The structures of the catalysts were characterized using in-situ techniques including X-ray diffraction, Pair Distribution Function, X-ray absorption fine structure and transmission electron microscopy; while possible surface intermediates for the ESR reaction were investigated by Diffuse Reflectance Infrared Fourier Transform Spectroscopy. In these materials, all the W and part of the Ni were incorporated into the CeO? lattice, with the remaining Ni forming highly dispersed nano NiO (< 2 nm) outside the Ni-W-Ce oxide structure. The nano NiO was reduced to Ni under ESR conditions. The Ni-W-Ce systeme exhibited a much larger lattice strain than those seen for Ni-Ce and W-Ce. Synergistic effects between Ni and W inside ceria produced a substantial amount of defects and O vacancies that led to high catalytic activity, selectivity and stability (i.e. resistance to coke formation) during ethanol steam reforming.

  19. Bimetallic Ni-Rh catalysts with low amounts of Rh for the steam and autothermal reforming of n-butane for fuel-cell applications.

    SciTech Connect (OSTI)

    Ferrandon, M.; Kropf, A. J.; Krause, T.; Chemical Sciences and Engineering Division

    2010-05-15

    Mono-metallic nickel and rhodium catalysts and bimetallic Ni-Rh catalysts supported on La-Al{sub 2}O{sub 3}, CeZrO{sub 2} and CeMgOx were prepared and evaluated for catalyzing the steam and autothermal reforming of n-butane. The binary Ni-Rh supported on La-Al{sub 2}O{sub 3} catalysts with low weight loading of rhodium exhibited higher H{sub 2} yields than Ni or Rh alone. The Ni-Rh/CeZrO{sub 2} catalyst exhibited higher performance and no coke formation, compared to the same metals on other supports. A NiAl{sub 2}O{sub 4} spinel phase was obtained on all Ni and Ni-Rh catalysts supported on La-Al{sub 2}O{sub 3}. The presence of rhodium stabilized the spinel phase as well as NiOx species upon reforming while Ni alone was mostly reduced into metallic species. Extended X-ray absorption fine-structure analysis showed evidence of Ni-Rh alloy during preparation and even further after an accelerated aging at 900C in a H{sub 2}/H{sub 2}O atmosphere.

  20. Superior performance of Ni-W-Ce mixed-metal oxide catalysts for ethanol steam reforming: Synergistic effects of W- and Ni-dopants

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Rodriguez, Jose A. [Brookhaven National Lab. (BNL), Upton, NY (United States); State Univ. of New York Stony Brook, Stony Brook, NY (United States); Liu, Zongyuan [Brookhaven National Lab. (BNL), Upton, NY (United States); State Univ. of New York Stony Brook, Stony Brook, NY (United States); Xu, Wenqian [Brookhaven National Lab. (BNL), Upton, NY (United States); Yao, Siyu [Brookhaven National Lab. (BNL), Upton, NY (United States); Johnson-Peck, Aaron C. [Brookhaven National Lab. (BNL), Upton, NY (United States); Zhao, Fuzhen [Brookhaven National Lab. (BNL), Upton, NY (United States); Michorczyk, Piotr [Inst. de Catalisis y Petroleoquimica, Madrid (Spain); Kubacka, Anna [Inst. de Catalisis y Petroleoquimica, Madrid (Spain); Stach, Eric A. [Brookhaven National Lab. (BNL), Upton, NY (United States); Fernandez-Garica, Marcos [State Univ. of New York Stony Brook, Stony Brook, NY (United States); Senanayake, Sanjaya D. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2015-01-01

    The ethanol steam reforming (ESR) reaction was studied over a series of Ni-W-Ce oxide catalysts. The structures of the catalysts were characterized using in-situ techniques including X-ray diffraction, Pair Distribution Function, X-ray absorption fine structure and transmission electron microscopy; while possible surface intermediates for the ESR reaction were investigated by Diffuse Reflectance Infrared Fourier Transform Spectroscopy. In these materials, all the W and part of the Ni were incorporated into the CeO? lattice, with the remaining Ni forming highly dispersed nano NiO (< 2 nm) outside the Ni-W-Ce oxide structure. The nano NiO was reduced to Ni under ESR conditions. The Ni-W-Ce systeme exhibited a much larger lattice strain than those seen for Ni-Ce and W-Ce. Synergistic effects between Ni and W inside ceria produced a substantial amount of defects and O vacancies that led to high catalytic activity, selectivity and stability (i.e. resistance to coke formation) during ethanol steam reforming.

  1. Status of pulse combustion applications in (1) steam reforming of coal, (2) fluid bed combustion of coal, and (3) direct coal fired gas turbine

    SciTech Connect (OSTI)

    Durai-Swamy, K. [ThermoChem, Inc., Santa Fe Springs, CA (United States); Chandran, R.; Said, H.; Steedman, W.

    1994-12-31

    ThermoChem, Inc. has designed a 450 T/D wet coal gasification by indirect, pulse-combustor-heated, steam reforming process. The plant site is Gillette, Wyoming. Products from the demo project are: (1) High pressure steam for a K-Fuel coal upgrading plant and (2) Medium Btu syngas, which could be used for power generation or methanol production. The indirect heated steam reformer could also produce a char by-product (if desired) that could be used as a reductant in direct iron making (DRI) process. There has been interest for char production as well. ThermoChem is constructing a pulse assisted, atmospheric pressure fluid bed combustor unit (PAFBC) to produce 50,000 lb/hr of steam, at Clemson University in South Carolina. MTCI`s developing a pressurized pulse coal combustor coupled with bimodal ash agglomeration, sulfur capture and solids removal features, such that the hot flue gas can be directly expanded in a gas turbine to generate power. The status of these Clean Coal Technologies is presented in this paper.

  2. Superior performance of Ni–W–Ce mixed-metal oxide catalysts for ethanol steam reforming: Synergistic effects of W- and Ni-dopants

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Liu, Zongyuan; Xu, Wenqian; Yao, Siyu; Johnson-Peck, Aaron C.; Zhao, Fuzhen; Michorczyk, Piotr; Kubacka, Anna; Stach, Eric A.; Fernández-García, Marcos; Senanayake, Sanjaya D.; et al

    2014-11-26

    In this study, the ethanol steam reforming (ESR) reaction was examined over a series of Ni-W-Ce oxide catalysts. The structures of the catalysts were characterized using in-situ techniques including X-ray diffraction, Pair Distribution Function, X-ray absorption fine structure and transmission electron microscopy; while possible surface intermediates for the ESR reaction were investigated by Diffuse Reflectance Infrared Fourier Transform Spectroscopy. In these materials, all the W and part of the Ni were incorporated into the CeO? lattice, with the remaining Ni forming highly dispersed nano NiO (more »under ESR conditions. The Ni-W-Ce systeme exhibited a much larger lattice strain than those seen for Ni-Ce and W-Ce. Synergistic effects between Ni and W inside ceria produced a substantial amount of defects and O vacancies that led to high catalytic activity, selectivity and stability (i.e. resistance to coke formation) during ethanol steam reforming.« less

  3. JET MIXING ANALYSIS FOR SRS HIGH-LEVEL WASTE RECOVERY

    SciTech Connect (OSTI)

    Lee, S.

    2011-07-05

    The process of recovering the waste in storage tanks at the Savannah River Site (SRS) typically requires mixing the contents of the tank to ensure uniformity of the discharge stream. Mixing is accomplished with one to four slurry pumps located within the tank liquid. The slurry pump may be fixed in position or they may rotate depending on the specific mixing requirements. The high-level waste in Tank 48 contains insoluble solids in the form of potassium tetraphenyl borate compounds (KTPB), monosodium titanate (MST), and sludge. Tank 48 is equipped with 4 slurry pumps, which are intended to suspend the insoluble solids prior to transfer of the waste to the Fluidized Bed Steam Reformer (FBSR) process. The FBSR process is being designed for a normal feed of 3.05 wt% insoluble solids. A chemical characterization study has shown the insoluble solids concentration is approximately 3.05 wt% when well-mixed. The project is requesting a Computational Fluid Dynamics (CFD) mixing study from SRNL to determine the solids behavior with 2, 3, and 4 slurry pumps in operation and an estimate of the insoluble solids concentration at the suction of the transfer pump to the FBSR process. The impact of cooling coils is not considered in the current work. The work consists of two principal objectives by taking a CFD approach: (1) To estimate insoluble solids concentration transferred from Tank 48 to the Waste Feed Tank in the FBSR process and (2) To assess the impact of different combinations of four slurry pumps on insoluble solids suspension and mixing in Tank 48. For this work, several different combinations of a maximum of four pumps are considered to determine the resulting flow patterns and local flow velocities which are thought to be associated with sludge particle mixing. Two different elevations of pump nozzles are used for an assessment of the flow patterns on the tank mixing. Pump design and operating parameters used for the analysis are summarized in Table 1. The baseline pump orientations are chosen by the previous work [Lee et. al, 2008] and the initial engineering judgement for the conservative flow estimate since the modeling results for the other pump orientations are compared with the baseline results. As shown in Table 1, the present study assumes that each slurry pump has 900 gpm flowrate for the tank mixing analysis, although the Standard Operating Procedure for Tank 48 currently limits the actual pump speed and flowrate to a value less than 900 gpm for a 29 inch liquid level. Table 2 shows material properties and weight distributions for the solids to be modeled for the mixing analysis in Tank 48.

  4. Parking Reform Made Easy

    E-Print Network [OSTI]

    Willson, Richard

    2013-01-01

    decide to adopt lower parking requirements, or to eliminateeconomic goals may embrace parking deregulation because itEngineers. 2010. Parking Generation, 4th Edition, Washington

  5. NEPA Contracting Reform Guidance

    Broader source: Energy.gov (indexed) [DOE]

    NEPA process costs < NEPA contractor evaluation procedures < details on the DOE NEPA Web site U.S. Department of Energy, Office of NEPA Policy and Assistance, December 1996...

  6. Steam reforming catalyst

    DOE Patents [OSTI]

    Kramarz, Kurt W. (Murrysville, PA); Bloom, Ira D. (Bolingbrook, IL); Kumar, Romesh (Naperville, IL); Ahmed, Shabbir (Bolingbrook, IL); Wilkenhoener, Rolf (Oakbrook Terrace, IL); Krumpelt, Michael (Naperville, IL)

    2001-01-01

    A method of forming a hydrogen rich gas from a source of hydrocarbon fuel. A vapor of the hydrocarbon fuel and steam is brought in contact with a two-part catalyst having a dehydrogenation powder portion and an oxide-ion conducting powder portion at a temperature not less than about 770.degree.C. for a time sufficient to generate the hydrogen rich. The H.sub.2 content of the hydrogen gas is greater than about 70 percent by volume. The dehydrogenation portion of the catalyst includes a group VIII metal, and the oxide-ion conducting portion is selected from a ceramic oxide from the group crystallizing in the fluorite or perovskite structure and mixtures thereof. The oxide-ion conducting portion of the catalyst is a ceramic powder of one or more of ZrO.sub.2, CeO.sub.2, Bi.sub.2 O.sub.3, (BiVO).sub.4, and LaGaO.sub.3.

  7. NEPA Contracting Reform Guidance

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nAand DOEDepartment of Energy009 248.2 254.8 251.5 65.9Lighting

  8. New Health Insurance Marketplace Coverage Options and Your Health Coverage Key parts of the Patient Protection and Affordable Care Act, also known as the health care reform law, go into effect January 1, 2014. When this

    E-Print Network [OSTI]

    New Health Insurance Marketplace Coverage Options and Your Health Coverage Key parts of the Patient Protection and Affordable Care Act, also known as the health care reform law, go into effect January 1, 2014. When this happens, there will be a new way to buy health insurance: the Health Insurance Marketplace

  9. Comparative Study on the Sulfur Tolerance and Carbon Resistance of Supported Noble Metal Catalysts in Steam Reforming of Liquid Hydrocarbon Fuel

    SciTech Connect (OSTI)

    Xie, Chao; Chen, Yongsheng; Engelhard, Mark H.; Song, Chunshan

    2012-04-18

    This work was conducted to clarify the influence of the type of metal and support on the sulfur tolerance and carbon resistance of supported noble metal catalysts in steam reforming of liquid hydrocarbons. Al2O3-supported noble metal catalysts (Rh, Ru, Pt, and Pd), Rh catalysts on different supports (Al2O3, CeO2, SiO2, and MgO), and Pt catalyst supported on CeO2 and Al2O3, were examined for steam reforming of a liquid hydrocarbon fuel (Norpar13 from Exxon Mobil) at 800 C for 55 h. The results indicate that (1) Rh/Al2O3 shows higher sulfur tolerance than the Ru, Pt, and Pd catalysts on the same support; (2) both Al2O3 and CeO2 are promising supports for Rh catalyst to process sulfur-containing hydrocarbons; and (3) Pt/CeO2 exhibits better catalytic performance than Pt/Al2O3 in the reaction with sulfur. TEM results demonstrate that the metal particles in Rh/Al2O3 were better dispersed (mostly in 1-3 nm) compared with the other catalysts after reforming the sulfur-containing feed. As revealed by XPS, the binding energy of Rh 3d for Rh/Al2O3 is notably higher than that for Rh/CeO2, implying the formation of electron-deficient Rh particles in the former. The strong sulfur tolerance of Rh/Al2O3 may be related to the formation of well-dispersed electron-deficient Rh particles on the Al2O3 support. Sulfur K-edge XANES illustrates the preferential formation of sulfonate and sulfate on Rh/Al2O3, which is believed to be beneficial for improving its sulfur tolerance as their oxygen-shielded sulfur structure may hinder direct Rh-S interaction. Due to its strong sulfur tolerance, the carbon deposition on Rh/Al2O3 was significantly lower than that on the Al2O3-supported Ru, Pt, and Pd catalysts after the reaction with sulfur. The superior catalytic performance of CeO2-supported Rh and Pt catalysts in the presence of sulfur can be ascribed mainly to the promotion effect of CeO2 on carbon gasification, leading to much lower carbon deposition compared with the Rh/Al2O3, Rh/MgO, Rh/SiO2 and Pt/Al2O3 catalysts.

  10. Highly Active and Stable MgAl2O4 Supported Rh and Ir Catalysts for Methane Steam Reforming: A Combined Experimental and Theoretical Study

    SciTech Connect (OSTI)

    Mei, Donghai; Glezakou, Vassiliki Alexandra; Lebarbier, Vanessa MC; Kovarik, Libor; Wan, Haiying; Albrecht, Karl O.; Gerber, Mark A.; Rousseau, Roger J.; Dagle, Robert A.

    2014-07-01

    In this work we present a combined experimental and theoretical investigation of stable MgAl2O4 spinel-supported Rh and Ir catalysts for the steam methane reforming (SMR) reaction. Firstly, catalytic performance for a series of noble metal catalysts supported on MgAl2O4 spinel was evaluated for SMR at 600-850°C. Turnover rate at 850°C follows the order: Pd > Pt > Ir > Rh > Ru > Ni. However, Rh and Ir were found to have the best combination of activity and stability for methane steam reforming in the presence of simulated biomass-derived syngas. It was found that highly dispersed ~2 nm Rh and ~1 nm Ir clusters were formed on the MgAl2O4 spinel support. Scanning Transition Electron Microscopy (STEM) images show that excellent dispersion was maintained even under challenging high temperature conditions (e.g. at 850°C in the presence of steam) while Ir and Rh catalysts supported on Al2O3 were observed to sinter at increased rates under the same conditions. These observations were further confirmed by ab initio molecular dynamics (AIMD) simulations which find that ~1 nm Rh and Ir particles (50-atom cluster) bind strongly to the MgAl2O4 surfaces via a redox process leading to a strong metal-support interaction, thus helping anchor the metal clusters and reduce the tendency to sinter. Density functional theory (DFT) calculations suggest that these supported smaller Rh and Ir particles have a lower work function than larger more bulk-like ones, which enables them to activate both water and methane more effectively than larger particles, yet have a minimal influence on the relative stability of coke precursors. In addition, theoretical mechanistic studies were used to probe the relationship between structure and reactivity. Consistent with the experimental observations, our theoretical modeling results also suggest that the small spinel-supported Ir particle catalyst is more active than the counterpart of Rh catalyst for SMR. This work was financially supported by the United States Department of Energy (DOE)’s Bioenergy Technologies Office (BETO) and performed at the Pacific Northwest National Laboratory (PNNL). PNNL is a multi-program national laboratory operated for DOE by Battelle Memorial Institute. Computing time was granted by a user proposal at the Molecular Science Computing Facility in the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL) located at PNNL. Part of the computational time was provided by the National Energy Research Scientific Computing Center (NERSC).

  11. Mechanistic insights of ethanol steam reforming over Ni-CeOx(111): The importance of hydroxyl groups for suppressing coke formation

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Liu, Zongyuan; Senanayake, Sanjaya D.; Duchon, Tomas; Wang, Huanru; Peterson, Erik W.; Zhou, Yinghui; Luo, Si; Zhou, Jing; Matolin, Vladimir; Stacchiola, Dario J.; et al

    2015-07-10

    We have studied the reaction of ethanol and water over Ni–CeO2-x(111) model surfaces to elucidate the mechanistic steps associated with the ethanol steam reforming (ESR) reaction. Our results provide insights about the importance of hydroxyl groups to the ESR reaction over Ni-based catalysts. Systematically, we have investigated the reaction of ethanol on Ni–CeO2-x(111) at varying Ce³? concentrations (CeO1.8–2.0) with absence/presence of water using a combination of soft X-ray photoelectron spectroscopy (sXPS) and temperature-programmed desorption (TPD). Consistent with previous reports, upon annealing, metallic Ni formed on reduced ceria while NiO was the main component on fully oxidized ceria. Ni? is themore »active phase leading to both the C–C and C–H cleavage of ethanol but is also responsible for carbon accumulation or coking. We have identified a Ni?C phase that formed prior to the formation of coke. At temperatures above 600K, the lattice oxygen from ceria and the hydroxyl groups from water interact cooperatively in the removal of coke, likely through a strong metal–support interaction between nickel and ceria that facilitates oxygen transfer.« less

  12. The influence of nano-architectured CeOx supports in RhPd/CeO? for the catalytic ethanol steam reforming reaction

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Divins, N. J.; Senanayake, S. D.; Casanovas, A.; Xu, W.; Trovarelli, A.; Llorca, J.

    2015-01-19

    The ethanol steam reforming (ESR) reaction has been tested over RhPd supported on polycrystalline ceria in comparison to structured supports composed of nanoshaped CeO? cubes and CeO? rods tailored towards the production of hydrogen. At 650-700 K the hydrogen yield follows the trend RhPd/CeO?-cubes > RhPd/CeO? -rods > RhPd/CeO?- polycrystalline, whereas at temperatures higher than 800 K the catalytic performance of all samples is similar and close to the thermodynamic equilibrium. The improved performance of RhPd/CeO?-cubes and RhPd/CeO? -rods for ESR at low temperature is mainly ascribed to higher water-gas shift activity and a strong interaction between the bimetallic -more »oxide support interaction. STEM analysis shows the existence of RhPd alloyed nanoparticles in all samples, with no apparent relationship between ESR performance and RhPd particle size. X-ray diffraction under operating conditions shows metal reorganization on {100} and {110} ceria crystallographic planes during catalyst activation and ESR, but not on {111} ceria crystallographic planes. The RhPd reconstructing and tuned activation over ceria nanocubes and nanorods is considered the main reason for better catalytic activity with respect to conventional catalysts based on polycrystalline ceria« less

  13. Mechanistic Insights of Ethanol Steam Reforming over Ni–CeO x (111): The Importance of Hydroxyl Groups for Suppressing Coke Formation

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Liu, Zongyuan; Ducho?, Tomáš; Wang, Huanru; Peterson, Erik W.; Zhou, Yinghui; Luo, Si; Zhou, Jing; Matolín, Vladimir; Stacchiola, Dario J.; Rodriguez, José A.; et al

    2015-07-30

    We have studied the reaction of ethanol and water over Ni–CeO2-x(111) model surfaces to elucidate the mechanistic steps associated with the ethanol steam reforming (ESR) reaction. Our results provide insights about the importance of hydroxyl groups to the ESR reaction over Ni-based catalysts. Systematically, we have investigated the reaction of ethanol on Ni–CeO2-x(111) at varying Ce³? concentrations (CeO1.8–2.0) with absence/presence of water using a combination of soft X-ray photoelectron spectroscopy (sXPS) and temperature-programmed desorption (TPD). Consistent with previous reports, upon annealing, metallic Ni formed on reduced ceria while NiO was the main component on fully oxidized ceria. Ni? is themore »active phase leading to both the C–C and C–H cleavage of ethanol but is also responsible for carbon accumulation or coking. We have identified a Ni?C phase that formed prior to the formation of coke. At temperatures above 600K, the lattice oxygen from ceria and the hydroxyl groups from water interact cooperatively in the removal of coke, likely through a strong metal–support interaction between nickel and ceria that facilitates oxygen transfer.« less

  14. "Research to Improve the Efficacy of Captive Broodstock Programs and Advance Hatchery Reform Throughout the Columbia River Basin." [from the Abstract], 2007-2008 Annual Progress Report.

    SciTech Connect (OSTI)

    Berejikian, Barry A. [National Marine Fisheries Service

    2009-04-08

    This project was developed to conduct research to improve the efficacy of captive broodstock programs and advance hatchery reform throughout the Columbia river basin. The project has three objectives: (1) maintain adaptive life history characteristics in Chinook salmon, (2) improve imprinting in juvenile sockeye salmon, and (3) match wild phenotypes in Chinook and sockeye salmon reared in hatcheries. A summary of the results are as follows: Objective 1: Adult and jack Chinook salmon males were stocked into four replicate spawning channels at a constant density (N = 16 per breeding group), but different ratios, and were left to spawn naturally with a fixed number of females (N = 6 per breeding group). Adult males obtained primary access to females and were first to enter the nest at the time of spawning. Jack male spawning occurred primarily by establishing satellite positions downstream of the courting pair, and 'sneaking' into the nest at the time of spawning. Male dominance hierarchies were fairly stable and strongly correlated with the order of nest entry at the time of spawning. Spawning participation by jack and adult males is consistent with a negative frequency dependent selection model, which means that selection during spawning favors the rarer life history form. Results of DNA parentage assignments will be analyzed to estimate adult-to-fry fitness of each male. Objective 2: To determine the critical period(s) for imprinting for sockeye salmon, juvenile salmon were exposed to known odorants at key developmental stages. Molecular assessments of imprinting-induced changes in odorant receptor gene expression indicated that regulation of odorant expression is influenced by developmental status and odor exposure history. The results suggest that sockeye salmon are capable of imprinting to homing cues during the developmental periods that correspond to several of current release strategies employed as part of the Captive Broodstock program (specifically, planting eyed eggs, fall and smolt releases into the lake) appear to be appropriate for successful homing of sockeye in Redfish Lake. Also, our findings indicated that sockeye salmon were capable of olfactory imprinting at multiple life stages and over varying exposure durations. Fish exposed to odors just prior to smolting showed the strongest attraction to the imprinting odor arginine and this period corresponds to the period of highest plasma thyroxine levels and increased BAAR receptor mRNA in juveniles. Objective 3: Spring Chinook salmon were exposed to three different photoperiods and three feed rations at the button-up stage of development. Both photoperiod at emergence and ration post-ponding affected the number of males maturing at age one. Nearly 70% of the males in the early emergence and satiation fed group matured after the first year of rearing, while none of the fish reared on late emergence photoperiod (equivalent to emergence on May 1) matured during this time irrespective of ration treatment. Within the early emergence groups, reducing growth using ration (low or high) appeared to reduce the number of males maturing at age one from 70% to 40-50%. Maturation rates of fish that emerged in a photoperiod equivalent to mid-February (middle emergence) ranged from 10-25%. Together these data indicate that the seasonal timing of fry emergence and growth after ponding can alter life history patterns in spring Chinook salmon. The results imply that hatchery rearing practices that alter seasonal timing of fry emergence can have drastic effects on life history patterns in juvenile Chinook salmon. All three objectives are on-going and will result in recommendations (at the end of the FY 2009 performance period) to advance hatchery reforms in conventional and captive broodstock programs.

  15. UNIFORM GUIDANCE Goal for Reform

    E-Print Network [OSTI]

    Kroll, Kristen L.

    Target audits on risk of waste, fraud and abuse 2 #12;COFAR "Strong ControlsYield Better Outcomes Potential changes to their systems and websites Limited coordination among agencies 6 #12;Grantee Community Measuring local impact Not panicked (yet) Designate workgroup(s) Seeking consensus on interpretations

  16. Austin's Ghost and DSU Reform

    E-Print Network [OSTI]

    Bhala, Raj

    2003-01-01

    HeinOnline -- 37 Int’l L. 651 2003 HeinOnline -- 37 Int’l L. 652 2003 HeinOnline -- 37 Int’l L. 653 2003 HeinOnline -- 37 Int’l L. 654 2003 HeinOnline -- 37 Int’l L. 655 2003 HeinOnline -- 37 Int’l L. 656 2003 HeinOnline -- 37 Int’l L. 657 2003 Hein...Online -- 37 Int’l L. 658 2003 HeinOnline -- 37 Int’l L. 659 2003 HeinOnline -- 37 Int’l L. 660 2003 HeinOnline -- 37 Int’l L. 661 2003 HeinOnline -- 37 Int’l L. 662 2003 HeinOnline -- 37 Int’l L. 663 2003 HeinOnline -- 37 Int’l L. 664 2003 HeinOnline -- 37 Int’l...

  17. Preliminary Thoughts on Copyright Reform

    E-Print Network [OSTI]

    Samuelson, Pamela

    2007-01-01

    memory of a computer triggers the reproduction right. 67 Inrights, including fair use, 39 first sale, 40 certain educational uses, 41 and backup copying of computer

  18. Reforming The Government Hiring Process

    Broader source: Energy.gov [DOE]

    The Department of Energy explains efforts made to simplify the federal hiring process within the Department, complete with video.

  19. Transparency Reforms: Theory and Practice

    E-Print Network [OSTI]

    Fox, Jonathan A; Haight, Libby

    2011-01-01

    y ´blica (CIDE). Pol?´tica Pu Fung, A. , Graham, M. , &information sites, see Pol?´ tica Digital (2009). 13. Theon July 10, 2010. Pol?´ tica Digital. (2009). Ranking de

  20. Journey to Excellence Goal 2 and Enhanced Tank Waste Strategy

    Office of Environmental Management (EM)

    upgrading Effluent Treatment Facility FBSR as supplemental treatment vs 2 nd LAW Facility HLW improved vitrification capacity (1.5 - 2 X) starting in 2025 using...

  1. "Research to Improve the Efficacy of Captive Broodstock Programs and Advance Hatchery Reform Throughout the Columbia River Basin." [from the Abstract], 2008-2009 Progress Report.

    SciTech Connect (OSTI)

    Berejikian, Barry A.

    2009-08-18

    This project was developed to conduct research to improve the efficacy of captive broodstock programs and advance hatchery reform throughout the Columbia River Basin. The project has three objectives: (1) maintain adaptive life history characteristics in Chinook salmon, (2) improve imprinting in juvenile sockeye salmon, and (3) match wild phenotypes in Chinook and sockeye salmon reared in hatcheries. A summary of the results are as follows: Objective 1: The ratio of jack to adult male Chinook salmon were varied in experimental breeding populations to test the hypothesis that reproductive success of the two male phenotypes would vary with their relative frequency in the population. Adult Chinook salmon males nearly always obtained primary access to nesting females and were first to enter the nest at the time of spawning. Jack male spawning occurred primarily by establishing satellite positions downstream of the courting pair, and 'sneaking' into the nest at the time of spawning. Male dominance hierarchies were fairly stable and strongly correlated with the order of nest entry at the time of spawning. Observed participation in spawning events and adult-to-fry reproductive success of jack and adult males was consistent with a negative frequency-dependent selection model. Overall, jack males sired an average of 21% of the offspring produced across a range of jack male frequencies. Implications of these and additional findings on Chinook salmon hatchery broodstock management will be presented in the FY 2009 Annual Report. Objective 2: To determine the critical period(s) for imprinting for sockeye salmon, juvenile salmon were exposed to known odorants at key developmental stages. Molecular assessments of imprinting-induced changes in odorant receptor gene expression indicated that regulation of odorant expression is influenced by developmental status and odor exposure history. Expression levels of basic amino acid receptor (BAAR) mRNA in the olfactory epithelium increased dramatically during final maturation in both Stanley Basin and Okanogan River sockeye. These increases appeared to be independent of odor exposure history, rising significantly in both arginine-naive and arginine-exposed fish. However, sockeye exposed to arginine during smolting demonstrated a larger increase in BAAR mRNA than arginine-naive fish. These results are consistent with the hypothesis that odorant receptors sensitive to home stream waters may be upregulated at the time of the homing migration and may afford opportunities to exploit this system to experimentally characterize imprinting success and ultimately identify hatchery practices that will minimize straying of artificially produced salmonids. Additional analysis of Sockeye salmon imprinting and further implications of these findings will be presented in the FY 2009 Annual Report. Objective 3: Photoperiod at emergence and ration after ponding were varied in Yakima River spring Chinook salmon to test the hypothesis that seasonal timing of emergence and growth during early stages of development alter seasonal timing of smoltification and age of male maturation. Fish reared under conditions to advance fry emergence and accelerate growth had the greatest variation in seasonal timing of smolting (fall, spring and summer) and highest rates of early male maturation with most males maturing at age 1 (35-40%). In contrast, fish with delayed emergence and slow growth had the least variation in phenotypes with most fish smolting as yearlings in the spring and no age-1 male maturation. Growth (not emergence timing) altered rates of age-2 male maturation. Results of this study demonstrate that altering fry development, as is often done in hatcheries, can profoundly affect later life history transitions and the range of phenotypes within a spring Chinook salmon population. Additional work in the next funding period will determine if these rearing regimes affected other aspects of smolt quality, which may affect ultimate survival upon ocean entry.

  2. Integrated Waste Treatment Unit (IWTU) Input Coal Analyses and Off-Gass Filter (OGF) Content Analyses

    SciTech Connect (OSTI)

    Jantzen, Carol M.; Missimer, David M.; Guenther, Chris P.; Shekhawat, Dushyant; VanEssendelft, Dirk T.; Means, Nicholas C.

    2015-04-23

    A full engineering scale Fluidized Bed Steam Reformer (FBSR) system is being used at the Idaho Nuclear Technology and Engineering Center (INTEC) to stabilize acidic Low Activity Waste (LAW) known as Sodium Bearing Waste (SBW). The INTEC facility, known as the Integrated Waste Treatment Unit (IWTU), underwent an Operational Readiness Review (ORR) and a Technology Readiness Assessment (TRA) in March 2014. The IWTU began non-radioactive simulant processing in late 2014 and by January, 2015 ; the IWTU had processed 62,000 gallons of simulant. The facility is currently in a planned outage for inspection of the equipment and will resume processing simulated waste feed before commencing to process 900,000 gallons of radioactive SBW. The SBW acidic waste will be made into a granular FBSR product (carbonate based) for disposal in the Waste Isolation Pilot Plant (WIPP). In the FBSR process calcined coal is used to create a CO2 fugacity to force the waste species to convert to carbonate species. The quality of the coal, which is a feed input, is important because the reactivity, moisture, and volatiles (C,H,N,O, and S) in the coal impact the reactions and control of the mineralizing process in the primary steam reforming vessel, the Denitration and Mineralizing Reformer (DMR). Too much moisture in the coal can require that additional coal be used. However since moisture in the coal is only a small fraction of the moisture from the fluidizing steam this can be self-correcting. If the coal reactivity or heating value is too low then the coal feedrate needs to be adjusted to achieve the desired heat generation. Too little coal and autothermal heat generation in the DMR cannot be sustained and/or the carbon dioxide fugacity will be too low to create the desired carbonate mineral species. Too much coal and excess S and hydroxide species can form. Excess sulfur from coal that (1) is too rich in sulfur or (2) from overfeeding coal can promote wall scale and contribute to corrosion in process piping and materials, in excessive off-gas absorbent loading, and in undesired process emissions. The ash content of the coal is important as the ash adds to the DMR and other vessel products which affect the final waste product mass and composition. The amount and composition of the ash also affects the reaction kinetics. Thus ash content and composition contributes to the mass balance. In addition, sodium, potassium, calcium, sulfur, and maybe silica and alumina in the ash may contribute to wall-scale formation. Sodium, potassium, and alumina in the ash will be overwhelmed by the sodium, potassium, and alumina from the feed but the impact from the other ash components needs to be quantified. A maximum coal particle size is specified so the feed system does not plug and a minimum particle size is specified to prevent excess elutriation from the DMR to the Process Gas Filter (PGF). A vendor specification was used to procure the calcined coal for IWTU processing. While the vendor supplied a composite analysis for the 22 tons of coal (Appendix A), this study compares independent analyses of the coal performed at the Savannah River National Laboratory (SRNL) and at the National Energy Technology Laboratory (NETL). Three supersacks a were sampled at three different heights within the sack in order to determine within bag variability and between bag variability of the coal. These analyses were also compared to the vendor’s composite analyses and to the coal specification. These analyses were also compared to historic data on Bestac coal analyses that had been performed at Hazen Research Inc. (HRI) between 2004-2011.

  3. EVALUATION OF THOR MINERALIZED WASTE FORMS FOR THE DOE ADVANCED REMEDIATION TECHNOLOGIES PHASE 2 PROJECT

    SciTech Connect (OSTI)

    Crawford, C.; Jantzen, C.

    2012-02-02

    The U.S. Department of Energy's (DOE) Office of River Protection (ORP) is responsible for the retrieval, treatment, immobilization, and disposal of Hanford's tank waste. Currently there are approximately 56 million gallons of highly radioactive mixed wastes awaiting treatment. A key aspect of the River Protection Project (RPP) cleanup mission is to construct and operate the Waste Treatment and Immobilization Plant (WTP). The WTP will separate the tank waste into high-level and low-activity waste (LAW) fractions, both of which will subsequently be vitrified. The projected throughput capacity of the WTP LAW Vitrification Facility is insufficient to complete the RPP mission in the time frame required by the Hanford Federal Facility Agreement and Consent Order, also known as the Tri-Party Agreement (TPA), i.e. December 31, 2047. Therefore, Supplemental Treatment is required both to meet the TPA treatment requirements as well as to more cost effectively complete the tank waste treatment mission. The Supplemental Treatment chosen will immobilize that portion of the retrieved LAW that is not sent to the WTP's LAW Vitrification facility into a solidified waste form. The solidified waste will then be disposed on the Hanford site in the Integrated Disposal Facility (IDF). In addition, the WTP LAW Vitrification facility off-gas condensate known as WTP Secondary Waste (WTP-SW) will be generated and enriched in volatile components such as Cs-137, I-129, Tc-99, Cl, F, and SO{sub 4} that volatilize at the vitrification temperature of 1150 C in the absence of a continuous cold cap. The current waste disposal path for the WTP-SW is to recycle it to the supplemental LAW treatment to avoid a large steady state accumulation in the pretreatment-vitrification loop. Fluidized Bed Steam Reforming (FBSR) offers a moderate temperature (700-750 C) continuous method by which LAW and/or WTP-SW wastes can be processed irrespective of whether they contain organics, nitrates, sulfates/sulfides, chlorides, fluorides, volatile radionuclides or other aqueous components. The FBSR technology can process these wastes into a crystalline ceramic (mineral) waste form. The mineral waste form that is produced by co-processing waste with kaolin clay in an FBSR process has been shown to be as durable as LAW glass. Monolithing of the granular FBSR product, which is one of the objectives of this current study, is being investigated to prevent dispersion during transport or burial/storage but is not necessary for performance. FBSR testing of a Hanford LAW simulant and a WTP-SW simulant at the pilot scale was performed by THOR Treatment Technologies, LLC at Hazen Research Inc. in April/May 2008. The Hanford LAW simulant was the Rassat 68 tank blend and the target concentrations for the LAW was increased by a factor of 10 for Sb, As, Ag, Cd, and Tl; 100 for Ba and Re (Tc surrogate); 1,000 for I; and 254,902 for Cs based on discussions with the DOE field office and the environmental regulators and an evaluation of the Hanford Tank Waste Envelopes A, B, and C. It was determined through the evaluation of the actual tank waste metals concentrations that some metal levels were not sufficient to achieve reliable detection in the off-gas sampling. Therefore, the identified metals concentrations were increased in the Rassat simulant processed by TTT at HRI to ensure detection and enable calculation of system removal efficiencies, product retention efficiencies, and mass balance closure without regard to potential results of those determinations or impacts on product durability response such as Toxicity Characteristic Leach Procedure (TCLP). A WTP-SW simulant based on melter off-gas analyses from Vitreous State Laboratory (VSL) was also tested at HRI in the 15-inch diameter Engineering Scale Test Demonstration (ESTD) dual reformer at HRI in 2008. The target concentrations for the Resource Conservation and Recovery Act (RCRA) metals were increased by 16X for Se, 29X for Tl, 42X for Ba, 48X for Sb, by 100X for Pb and Ni, 1000X for Ag, and 1297X for Cd to ensure detection by the an

  4. Radionuclide Retention Mechanisms in Secondary Waste-Form Testing: Phase II

    SciTech Connect (OSTI)

    Um, Wooyong; Valenta, Michelle M.; Chung, Chul-Woo; Yang, Jungseok; Engelhard, Mark H.; Serne, R. Jeffrey; Parker, Kent E.; Wang, Guohui; Cantrell, Kirk J.; Westsik, Joseph H.

    2011-09-26

    This report describes the results from laboratory tests performed at Pacific Northwest National Laboratory (PNNL) for Washington River Protection Solutions (WRPS) to evaluate candidate stabilization technologies that have the potential to successfully treat liquid secondary waste stream effluents produced by the Hanford Tank Waste Treatment and Immobilization Plant (WTP). WRPS is considering the design and construction of a Solidification Treatment Unit (STU) for the Effluent Treatment Facility (ETF) at Hanford. The ETF, a multi-waste, treatment-and-storage unit that has been permitted under the Resource Conservation and Recovery Act (RCRA), can accept dangerous, low-level, and mixed wastewaters for treatment. The STU needs to be operational by 2018 to receive secondary liquid waste generated during operation of the WTP. The STU will provide the additional capacity needed for ETF to process the increased volume of secondary waste expected to be produced by WTP. This report on radionuclide retention mechanisms describes the testing and characterization results that improve understanding of radionuclide retention mechanisms, especially for pertechnetate, {sup 99}TcO{sub 4}{sup -} in four different waste forms: Cast Stone, DuraLith alkali aluminosilicate geopolymer, encapsulated fluidized bed steam reforming (FBSR) product, and Ceramicrete phosphate bonded ceramic. These data and results will be used to fill existing data gaps on the candidate technologies to support a decision-making process that will identify a subset of the candidate waste forms that are most promising and should undergo further performance testing.

  5. DEVELOPMENT QUALIFICATION AND DISPOSAL OF AN ALTERNATIVE IMMOBILIZED LOW-ACTIVITY WASTE FORM AT THE HANFORD SITE

    SciTech Connect (OSTI)

    SAMS TL; EDGE JA; SWANBERG DJ; ROBBINS RA

    2011-01-13

    Demonstrating that a waste form produced by a given immobilization process is chemically and physically durable as well as compliant with disposal facility acceptance criteria is critical to the success of a waste treatment program, and must be pursued in conjunction with the maturation of the waste processing technology. Testing of waste forms produced using differing scales of processing units and classes of feeds (simulants versus actual waste) is the crux of the waste form qualification process. Testing is typically focused on leachability of constituents of concern (COCs), as well as chemical and physical durability of the waste form. A principal challenge regarding testing immobilized low-activity waste (ILAW) forms is the absence of a standard test suite or set of mandatory parameters against which waste forms may be tested, compared, and qualified for acceptance in existing and proposed nuclear waste disposal sites at Hanford and across the Department of Energy (DOE) complex. A coherent and widely applicable compliance strategy to support characterization and disposal of new waste forms is essential to enhance and accelerate the remediation of DOE tank waste. This paper provides a background summary of important entities, regulations, and considerations for nuclear waste form qualification and disposal. Against this backdrop, this paper describes a strategy for meeting and demonstrating compliance with disposal requirements emphasizing the River Protection Project (RPP) Integrated Disposal Facility (IDF) at the Hanford Site and the fluidized bed steam reforming (FBSR) mineralized low-activity waste (LAW) product stream.

  6. Browse : re-forming the urban library

    E-Print Network [OSTI]

    Baron, Sandra Ann

    2007-01-01

    The urban library has persisted as a cultural entity, largely because its interiorized form functions as a vault, creating a clear, although often intimidating, boundary between library program and the public realm. While ...

  7. Three Essays on Institutional Reforms in Mexico

    E-Print Network [OSTI]

    Beleche, Trinidad

    2010-01-01

    and Standardized Student Tests in Mexico . . . . 4.3.1Violence Laws and Acts of Domestic Violence in Mexico 3.1of School Year Length on Student Performance in Mexico 4.1

  8. A Method for Reforming the Patent System

    E-Print Network [OSTI]

    Menell, Peter S.

    2007-01-01

    U.S. PTO has issued 49 patents on tax avoidance strategies);Ideas (2004). pursuing patents (e.g. , distractions andOn the Complex Economics of Patent Scope, 90 Colum. L. Rev.

  9. Patent Reform: Aligning Reward and Contribution

    E-Print Network [OSTI]

    Shapiro, Carl

    2007-01-01

    pilot project in which some patent applications in softwareSee “Open Call From the Patent Office,” by Alan Sipress,review option under which patent applications are processed

  10. Biomass reforming processes in hydrothermal media

    E-Print Network [OSTI]

    Peterson, Andrew A

    2009-01-01

    While hydrothermal technologies offer distinct advantages in being able to process a wide variety of biomass feedstocks, the composition of the feedstock will have a large effect on the processing employed. This thesis ...

  11. USS --the need for reform Introduction

    E-Print Network [OSTI]

    Cowley, Stephen J.

    of the sector in return for the massive financial infusion. They did not push universities sufficiently to make

  12. The Westminster Model, Governance, and Judicial Reform

    E-Print Network [OSTI]

    Bevir, Mark

    2008-01-01

    both academics and political actors. Even if Bagehot loomedabout the behaviour of political actors and institutions.of uncertainly such that political actors, including central

  13. Searching for the Logic behind Welfare Reform

    E-Print Network [OSTI]

    White, Lucie

    1996-01-01

    than accelerate the maldistribution of wealth from the poorfrontline victims of the maldistribution - has moved fromhuman costs of maldistribution from becoming marginalized in

  14. The School Business: Rethinking Educational Reform

    E-Print Network [OSTI]

    Urban, Nancy

    1999-01-01

    s of h ealth care a n d p riso n s.103 This is sig nificanta b ilita tio n , so th at p riso n ers w ill sp e n d m oreoverall p o p u latio n of p riso n ers. The lack of m o tiv

  15. Patent Reform: Aligning Reward and Contribution

    E-Print Network [OSTI]

    Shapiro, Carl

    2007-01-01

    full appropriation” by the inventor of the social benefitsto this reasoning, if an inventor can appropriate only athe invention to the first inventor? Answering this question

  16. Utilitarianism, reform, and architecture - Edinburgh as exemplar 

    E-Print Network [OSTI]

    Qing, Feng

    2009-01-01

    Although the utilitarian character of modern architecture has been widely recognized, the relationship between Utilitarianism and architectural practice has not been adequately discussed. This thesis intends to contribute ...

  17. NEPA Contracting Reform Guidance | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy AEnergy Managing SwimmingMicrosoft The basics of05/24/2011 |guidance on NEPA

  18. Environmental fiscal reform (EFR) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar2-0057-EA Jump to:ofEnia SpA Jump to:Energy Tech ServicesAssociation

  19. Pyrochem Catalysts for Diesel Fuel Reforming

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass mapSpeedingProgramExemptionsProteinTotal natural gasPurchase,PyFEHM PyFEHM

  20. Unfunded Mandates Reform Act; Intergovernmental Consultation | Department

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyThe U.S.Laclede GasEfficiency|Feed|Department ofInspector General -of Energy

  1. Hiring Reform Memoranda and Action Plan

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancingR Walls - Building America Topathe Risk along the0585

  2. NEPA Contracting Reform Guidance (December 1996)

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested Parties -Department of EnergyNEW YORKFuelJuly-September 2013NEET-32,

  3. Neoliberal Education Reforms and Debates around Neoliberalism: Finance-driven Reforms in Chilean Higher Education

    E-Print Network [OSTI]

    Yusa, Taiko

    2012-01-01

    essential role of early childhood education in children’sILO) (1976) early childhood education. The Trends ofChile) ECCE Early Childhood Care and Education EFA Education

  4. The case for reform 13 Guide to the Act 411

    E-Print Network [OSTI]

    Cambridge, University of

    . The reality is that most people with criminal records seek employment for the same reasons as the rest of us out the activities of the Criminal Records Bureau' IRS Employment Review 483, pp. 42-48 #12 increased by half since it was introduced. Coupled with this increase has been a growth in unlawful Criminal

  5. Power sector reform, private investment and regional co-operation

    E-Print Network [OSTI]

    Newbery, David

    to finance foreign direct investment (given the perceived level of risk and the short tenor of most debt finance) has led to high initial charges for electricity purchased from these IPPs. The mismatch between the cost of these new PPAs, the average cost... be similarly problematic where they are dependent on domestic coal, as coal mining is often fraught in SAFTA Energy 11 terms of labour relations.14 Coal-fired stations using imported coal could be economically attractive but may be discouraged...

  6. Legislative Reform of the Kaesong Industrial Complex in North Korea

    E-Print Network [OSTI]

    You, Jeehye

    2011-01-01

    non- proliferation of nuclear weapons and trade issues. Onlyproliferation of nuclear weapons and transfer of technologynon- proliferation of nuclear weapons, the international

  7. Jeffersonian moment: feudalism and reform in Virginia, 1774?1786 

    E-Print Network [OSTI]

    Clinkman, Daniel Edward

    2013-11-26

    In his autobiography, Thomas Jefferson argued that his goal in the American Revolution had been to eliminate “feudal and unnatural distinctions” in colonial American society as part of the struggle for independence. This ...

  8. Legislative Reform of the Kaesong Industrial Complex in North Korea

    E-Print Network [OSTI]

    You, Jeehye

    2011-01-01

    program and promote nuclear proliferation worldwide. Evensignificance in non- proliferation of nuclear weapons andattention to its proliferation of nuclear weapons and

  9. DFMA Cost Estimates of Fuel-Cell/Reformer Systems

    E-Print Network [OSTI]

    System ·Power conditioning and electronics (for FC/Ref. Only) ·Electrical System ·Control System ·Sensors.036.81 Ø3.94 Ø11.5Ø13.5 20 52.9 19182021 7 23 15 Ø4.18 Battery System TIM Traction Elec. Motor What is not included in Project: ·Traction Inverter Module (TIM) ·Traction Electric Motor ·Peak-Power/Start-Up Battery

  10. Hanford Low Activity Waste (LAW) Fluidized Bed Steam Reformer...

    Office of Environmental Management (EM)

    Hanford Envelope A composite (68 tank) simulant tested Redesigned for Shielded Cell Facility (SCF) in 2006 7 INEEL SAIC STAR FACILITY 6" TTT HAZEN FACILITY 6" TTT HAZEN FACILITY...

  11. Reginald Pecock and Vernacular Theology in Pre-Reformation England

    E-Print Network [OSTI]

    Smith, Jennifer Anh-Thu Tran

    2012-01-01

    judicare vivos et mortuos. (8) Credo in Spiritum Sanctum, (id quod ponitur insymbolo (Credo sanctam Ecclesiam) virtutenon plus sentitur, quam "Credo sanctam Ecclesiam catholicam

  12. Physics First in Science Education Reform: Impacts on Pedagogy

    E-Print Network [OSTI]

    Purnell, Mechum Douglas

    2012-01-01

    2007a). Highlights from PISA 2006: Performance of U.S. 15-broad metrics (e.g. TIMSS, PISA, NAEP - discussed later), USStudent Assessment (PISA) is used for the purposes of

  13. Mind, Brain and Education as a Framework for Curricular Reform /

    E-Print Network [OSTI]

    Larrison, Abigail L.

    2013-01-01

    that have focused not only on learning and student outcomes,focused on bringing all students to the same level, not attending to differences in learninglearning experiences. Waldorf, on the other hand, focused heavily on development, attended to emotional needs of students,

  14. Persuasion's empire : French imperial reformism, 1763-1801

    E-Print Network [OSTI]

    Donath, Christian

    2012-01-01

    a lengthy description of the airship and its ultimate crash:to glance at the ascending airship, they concluded with

  15. The Faces of Haiti: Resolute in Reform, Resistance and Recovery

    E-Print Network [OSTI]

    Graham, Maryemma; Rosenblum, Brian; Jayaram, Kiran C.; Claiborne, C. B.

    2011-10-25

    . It was not the earthquake alone that generated our inter- est in a visit to Haiti. KU has been home for the Institute for Haitian Studies since 1992, when it was founded by Bryant Freeman, currently an emeritus professor of French and Italian. While some of our team were... This was their fifth invitation- al workshop and the second held since the earthquake. As interest in Haiti has increased, INURED has stepped up its effort to play a think-tank role. We came to the meet- ing without an agenda, which served to our advantage. We...

  16. GUIDANCE ON APPLICATION OF FEDERAL VACANCIES REFORM ACT OF 1998...

    Broader source: Energy.gov (indexed) [DOE]

    in relevant part, as "an establishment in the executive branch (other than the United States Postal Service or the Postal Rate Commission) which is not an Executive department,...

  17. Fundamental kinetic modeling of the catalytic reforming process 

    E-Print Network [OSTI]

    Sotelo-Boyas, Rogelio

    2007-04-25

    model are the reduction of aromatics, mainly benzene. The results from the simulations agree with the typical performance found in the industrial process....

  18. The Clean Development Mechanism and Power Sector Reforms in Developing

    E-Print Network [OSTI]

    2), methane (CH4), nitrous oxide (N2O), sulphur hexafluoride (SF6), perfluorocarbons (PCFs inventories · CDM projects must lead to real, measurable and long-term climate change benefits · Eligible CDM

  19. Persuasion's empire : French imperial reformism, 1763-1801

    E-Print Network [OSTI]

    Donath, Christian

    2012-01-01

    the ‘high’ 57 ulama in Egypt powers that had not existedto keep us in Egypt as supporters of his power and to be hisEgypt however called for more restraint, particularly given the power

  20. Research and Development of a PEM Fuel Cell, Hydrogen Reformer...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lab R&D Review, May 6-10, 2002, Golden, Colorado. Process Analysis Work for the DOE Hydrogen Program - 2001 Overview of DOE - DOT December 2009 CNG and Hydrogen Fuels Workshop...